usb: gadget: atmel_usba: Use devm_*() functions
Use devm_*() functions to make cleanup paths simpler.
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 68cf3a4..bb1eb42 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1996,14 +1996,12 @@
if (irq < 0)
return irq;
- pclk = clk_get(&pdev->dev, "pclk");
+ pclk = devm_clk_get(&pdev->dev, "pclk");
if (IS_ERR(pclk))
return PTR_ERR(pclk);
- hclk = clk_get(&pdev->dev, "hclk");
- if (IS_ERR(hclk)) {
- ret = PTR_ERR(hclk);
- goto err_get_hclk;
- }
+ hclk = devm_clk_get(&pdev->dev, "hclk");
+ if (IS_ERR(hclk))
+ return PTR_ERR(hclk);
spin_lock_init(&udc->lock);
udc->pdev = pdev;
@@ -2012,17 +2010,17 @@
udc->vbus_pin = -ENODEV;
ret = -ENOMEM;
- udc->regs = ioremap(regs->start, resource_size(regs));
+ udc->regs = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
if (!udc->regs) {
dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
- goto err_map_regs;
+ return ret;
}
dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
(unsigned long)regs->start, udc->regs);
- udc->fifo = ioremap(fifo->start, resource_size(fifo));
+ udc->fifo = devm_ioremap(&pdev->dev, fifo->start, resource_size(fifo));
if (!udc->fifo) {
dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
- goto err_map_fifo;
+ return ret;
}
dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
(unsigned long)fifo->start, udc->fifo);
@@ -2033,7 +2031,7 @@
ret = clk_prepare_enable(pclk);
if (ret) {
dev_err(&pdev->dev, "Unable to enable pclk, aborting.\n");
- goto err_clk_enable;
+ return ret;
}
toggle_bias(0);
usba_writel(udc, CTRL, USBA_DISABLE_MASK);
@@ -2044,22 +2042,22 @@
else
udc->usba_ep = usba_udc_pdata(pdev, udc);
- if (IS_ERR(udc->usba_ep)) {
- ret = PTR_ERR(udc->usba_ep);
- goto err_alloc_ep;
- }
+ if (IS_ERR(udc->usba_ep))
+ return PTR_ERR(udc->usba_ep);
- ret = request_irq(irq, usba_udc_irq, 0, "atmel_usba_udc", udc);
+ ret = devm_request_irq(&pdev->dev, irq, usba_udc_irq, 0,
+ "atmel_usba_udc", udc);
if (ret) {
dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n",
irq, ret);
- goto err_request_irq;
+ return ret;
}
udc->irq = irq;
if (gpio_is_valid(udc->vbus_pin)) {
if (!devm_gpio_request(&pdev->dev, udc->vbus_pin, "atmel_usba_udc")) {
- ret = request_irq(gpio_to_irq(udc->vbus_pin),
+ ret = devm_request_irq(&pdev->dev,
+ gpio_to_irq(udc->vbus_pin),
usba_vbus_irq, 0,
"atmel_usba_udc", udc);
if (ret) {
@@ -2078,31 +2076,13 @@
ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
if (ret)
- goto err_add_udc;
+ return ret;
usba_init_debugfs(udc);
for (i = 1; i < udc->num_ep; i++)
usba_ep_init_debugfs(udc, &udc->usba_ep[i]);
return 0;
-
-err_add_udc:
- if (gpio_is_valid(udc->vbus_pin))
- free_irq(gpio_to_irq(udc->vbus_pin), udc);
-
- free_irq(irq, udc);
-err_request_irq:
-err_alloc_ep:
-err_clk_enable:
- iounmap(udc->fifo);
-err_map_fifo:
- iounmap(udc->regs);
-err_map_regs:
- clk_put(hclk);
-err_get_hclk:
- clk_put(pclk);
-
- return ret;
}
static int __exit usba_udc_remove(struct platform_device *pdev)
@@ -2118,16 +2098,6 @@
usba_ep_cleanup_debugfs(&udc->usba_ep[i]);
usba_cleanup_debugfs(udc);
- if (gpio_is_valid(udc->vbus_pin)) {
- free_irq(gpio_to_irq(udc->vbus_pin), udc);
- }
-
- free_irq(udc->irq, udc);
- iounmap(udc->fifo);
- iounmap(udc->regs);
- clk_put(udc->hclk);
- clk_put(udc->pclk);
-
return 0;
}