drivers/rapidio/devices/tsi721_dma.c: optimize use of BDMA descriptors
Combine SG entries describing single contiguous memory block into one
Tsi721 BDMA descriptor. This reduces number of hardware descriptors
required for large data transfers and improves performance on the PCIe
side by reducing number of descriptor fetch requests.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/rapidio/devices/tsi721.h b/drivers/rapidio/devices/tsi721.h
index 7061ac0..0305675 100644
--- a/drivers/rapidio/devices/tsi721.h
+++ b/drivers/rapidio/devices/tsi721.h
@@ -644,6 +644,9 @@
#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+#define TSI721_BDMA_BD_RING_SZ 128
+#define TSI721_BDMA_MAX_BCOUNT (TSI721_DMAD_BCOUNT1 + 1)
+
struct tsi721_tx_desc {
struct dma_async_tx_descriptor txd;
struct tsi721_dma_desc *hw_desc;
@@ -652,6 +655,7 @@
u64 rio_addr;
/* upper 2-bits of 66-bit RIO address */
u8 rio_addr_u;
+ u32 bcount;
bool interrupt;
struct list_head desc_node;
struct list_head tx_list;
diff --git a/drivers/rapidio/devices/tsi721_dma.c b/drivers/rapidio/devices/tsi721_dma.c
index 91245f5..9b60b1f 100644
--- a/drivers/rapidio/devices/tsi721_dma.c
+++ b/drivers/rapidio/devices/tsi721_dma.c
@@ -304,35 +304,17 @@
}
static int
-tsi721_fill_desc(struct tsi721_bdma_chan *bdma_chan,
- struct tsi721_tx_desc *desc, struct scatterlist *sg,
+tsi721_desc_fill_init(struct tsi721_tx_desc *desc, struct scatterlist *sg,
enum dma_rtype rtype, u32 sys_size)
{
struct tsi721_dma_desc *bd_ptr = desc->hw_desc;
u64 rio_addr;
- if (sg_dma_len(sg) > TSI721_DMAD_BCOUNT1 + 1) {
- dev_err(bdma_chan->dchan.device->dev,
- "SG element is too large\n");
- return -EINVAL;
- }
-
- dev_dbg(bdma_chan->dchan.device->dev,
- "desc: 0x%llx, addr: 0x%llx len: 0x%x\n",
- (u64)desc->txd.phys, (unsigned long long)sg_dma_address(sg),
- sg_dma_len(sg));
-
- dev_dbg(bdma_chan->dchan.device->dev,
- "bd_ptr = %p did=%d raddr=0x%llx\n",
- bd_ptr, desc->destid, desc->rio_addr);
-
/* Initialize DMA descriptor */
bd_ptr->type_id = cpu_to_le32((DTYPE1 << 29) |
(rtype << 19) | desc->destid);
- if (desc->interrupt)
- bd_ptr->type_id |= cpu_to_le32(TSI721_DMAD_IOF);
bd_ptr->bcount = cpu_to_le32(((desc->rio_addr & 0x3) << 30) |
- (sys_size << 26) | sg_dma_len(sg));
+ (sys_size << 26));
rio_addr = (desc->rio_addr >> 2) |
((u64)(desc->rio_addr_u & 0x3) << 62);
bd_ptr->raddr_lo = cpu_to_le32(rio_addr & 0xffffffff);
@@ -346,6 +328,20 @@
return 0;
}
+static int
+tsi721_desc_fill_end(struct tsi721_tx_desc *desc)
+{
+ struct tsi721_dma_desc *bd_ptr = desc->hw_desc;
+
+ /* Update DMA descriptor */
+ if (desc->interrupt)
+ bd_ptr->type_id |= cpu_to_le32(TSI721_DMAD_IOF);
+ bd_ptr->bcount |= cpu_to_le32(desc->bcount & TSI721_DMAD_BCOUNT1);
+
+ return 0;
+}
+
+
static void tsi721_dma_chain_complete(struct tsi721_bdma_chan *bdma_chan,
struct tsi721_tx_desc *desc)
{
@@ -674,6 +670,7 @@
unsigned int i;
u32 sys_size = dma_to_mport(dchan->device)->sys_size;
enum dma_rtype rtype;
+ dma_addr_t next_addr = -1;
if (!sgl || !sg_len) {
dev_err(dchan->device->dev, "%s: No SG list\n", __func__);
@@ -704,36 +701,84 @@
for_each_sg(sgl, sg, sg_len, i) {
int err;
- dev_dbg(dchan->device->dev, "%s: sg #%d\n", __func__, i);
+ if (sg_dma_len(sg) > TSI721_BDMA_MAX_BCOUNT) {
+ dev_err(dchan->device->dev,
+ "%s: SG entry %d is too large\n", __func__, i);
+ goto err_desc_put;
+ }
+
+ /*
+ * If this sg entry forms contiguous block with previous one,
+ * try to merge it into existing DMA descriptor
+ */
+ if (desc) {
+ if (next_addr == sg_dma_address(sg) &&
+ desc->bcount + sg_dma_len(sg) <=
+ TSI721_BDMA_MAX_BCOUNT) {
+ /* Adjust byte count of the descriptor */
+ desc->bcount += sg_dma_len(sg);
+ goto entry_done;
+ }
+
+ /*
+ * Finalize this descriptor using total
+ * byte count value.
+ */
+ tsi721_desc_fill_end(desc);
+ dev_dbg(dchan->device->dev, "%s: desc final len: %d\n",
+ __func__, desc->bcount);
+ }
+
+ /*
+ * Obtain and initialize a new descriptor
+ */
desc = tsi721_desc_get(bdma_chan);
if (!desc) {
dev_err(dchan->device->dev,
- "Not enough descriptors available\n");
- goto err_desc_get;
+ "%s: Failed to get new descriptor for SG %d\n",
+ __func__, i);
+ goto err_desc_put;
}
- if (sg_is_last(sg))
- desc->interrupt = (flags & DMA_PREP_INTERRUPT) != 0;
- else
- desc->interrupt = false;
-
desc->destid = rext->destid;
desc->rio_addr = rio_addr;
desc->rio_addr_u = 0;
+ desc->bcount = sg_dma_len(sg);
- err = tsi721_fill_desc(bdma_chan, desc, sg, rtype, sys_size);
+ dev_dbg(dchan->device->dev,
+ "sg%d desc: 0x%llx, addr: 0x%llx len: %d\n",
+ i, (u64)desc->txd.phys,
+ (unsigned long long)sg_dma_address(sg),
+ sg_dma_len(sg));
+
+ dev_dbg(dchan->device->dev,
+ "bd_ptr = %p did=%d raddr=0x%llx\n",
+ desc->hw_desc, desc->destid, desc->rio_addr);
+
+ err = tsi721_desc_fill_init(desc, sg, rtype, sys_size);
if (err) {
dev_err(dchan->device->dev,
"Failed to build desc: %d\n", err);
- goto err_desc_get;
+ goto err_desc_put;
}
- rio_addr += sg_dma_len(sg);
+ next_addr = sg_dma_address(sg);
if (!first)
first = desc;
else
list_add_tail(&desc->desc_node, &first->tx_list);
+
+entry_done:
+ if (sg_is_last(sg)) {
+ desc->interrupt = (flags & DMA_PREP_INTERRUPT) != 0;
+ tsi721_desc_fill_end(desc);
+ dev_dbg(dchan->device->dev, "%s: desc final len: %d\n",
+ __func__, desc->bcount);
+ } else {
+ rio_addr += sg_dma_len(sg);
+ next_addr += sg_dma_len(sg);
+ }
}
first->txd.cookie = -EBUSY;
@@ -741,7 +786,7 @@
return &first->txd;
-err_desc_get:
+err_desc_put:
tsi721_desc_put(bdma_chan, first);
return NULL;
}
@@ -792,7 +837,7 @@
if (i == TSI721_DMACH_MAINT)
continue;
- bdma_chan->bd_num = 64;
+ bdma_chan->bd_num = TSI721_BDMA_BD_RING_SZ;
bdma_chan->regs = priv->regs + TSI721_DMAC_BASE(i);
bdma_chan->dchan.device = &mport->dma;