[ARM] 4085/1: AT91: Header fixes.
Fix two typo's where AT01_* was used instead of AT91_*.
[Patch from Wojtek Kaniewski]
Fix definition of AT91_SMC_EXNWMODE for the SAM9 processors.
[Patch from Wu Xuan]
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/include/asm-arm/arch-at91rm9200/at91_rstc.h b/include/asm-arm/arch-at91rm9200/at91_rstc.h
index ccdc52d..237d3c4 100644
--- a/include/asm-arm/arch-at91rm9200/at91_rstc.h
+++ b/include/asm-arm/arch-at91rm9200/at91_rstc.h
@@ -17,7 +17,7 @@
#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */
#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */
#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */
-#define AT01_RSTC_KEY (0xff << 24) /* KEY Password */
+#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */
#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */
#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
index 270a5dc..ab25f9e 100644
--- a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
+++ b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
@@ -15,7 +15,7 @@
#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT01_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */
diff --git a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
index 7d94968..8ac797e 100644
--- a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
+++ b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
@@ -110,10 +110,10 @@
#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
-#define AT91_SMC_EXNWMODE (3 << 5) /* NWAIT Mode */
-#define AT91_SMC_EXNWMODE_DISABLE (0 << 5)
-#define AT91_SMC_EXNWMODE_FROZEN (2 << 5)
-#define AT91_SMC_EXNWMODE_READY (3 << 5)
+#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
+#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
+#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
+#define AT91_SMC_EXNWMODE_READY (3 << 4)
#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
#define AT91_SMC_BAT_SELECT (0 << 8)
#define AT91_SMC_BAT_WRITE (1 << 8)