ARM: at91/dts: add nodes for atmel hsmci controllers for atmel boards
Add mci controller nodes to atmel boards.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index e6a57a3..8e319bb 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -54,6 +54,16 @@
atmel,vbus-gpio = <&pioA 25 0>;
status = "okay";
};
+
+ mmc0: mmc@fff80000 {
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioE 18 0>;
+ wp-gpios = <&pioE 19 0>;
+ };
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
index f1b2e14..684b229 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
+++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
@@ -12,6 +12,18 @@
model = "Atmel at91sam9g20ek 2 mmc";
compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9";
+ ahb {
+ apb{
+ mmc0: mmc@fffa8000 {
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioC 2 0>;
+ };
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 63a0e5d..0090015 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -58,6 +58,15 @@
atmel,vbus-gpio = <&pioC 5 0>;
status = "okay";
};
+
+ mmc0: mmc@fffa8000 {
+ status = "okay";
+ slot@1 {
+ reg = <1>;
+ bus-width = <4>;
+ cd-gpios = <&pioC 9 0>;
+ };
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index afd5867..1fc299f 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -58,6 +58,25 @@
i2c1: i2c@fff88000 {
status = "okay";
};
+
+ mmc0: mmc@fff80000 {
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 10 0>;
+ };
+ };
+
+ mmc1: mmc@fffd0000 {
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 11 0>;
+ wp-gpios = <&pioD 29 0>;
+ };
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 912b2c2..3d165bc 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -45,6 +45,15 @@
i2c1: i2c@f8014000 {
status = "okay";
};
+
+ mmc0: mmc@f0008000 {
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioA 7 0>;
+ };
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index cc9730c..e042b5e 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -18,6 +18,24 @@
ahb {
apb {
+ mmc0: mmc@f0008000 {
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 15 0>;
+ };
+ };
+
+ mmc1: mmc@f000c000 {
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 14 0>;
+ };
+ };
+
dbgu: serial@fffff200 {
status = "okay";
};