drivers/regulator/lp3972.c - kernel/msm-4.9 - Gitiles

 /*
  * Regulator driver for National Semiconductors LP3972 PMIC chip
  *
  * Based on lp3971.c
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  */

 #include <linux/bug.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/lp3972.h>
 #include <linux/slab.h>

 struct lp3972 {
 	struct device *dev;
 	struct mutex io_lock;
 	struct i2c_client *i2c;
 	int num_regulators;
 	struct regulator_dev **rdev;
 };

 /* LP3972 Control Registers */
 #define LP3972_SCR_REG		0x07
 #define LP3972_OVER1_REG	0x10
 #define LP3972_OVSR1_REG	0x11
 #define LP3972_OVER2_REG	0x12
 #define LP3972_OVSR2_REG	0x13
 #define LP3972_VCC1_REG		0x20
 #define LP3972_ADTV1_REG	0x23
 #define LP3972_ADTV2_REG	0x24
 #define LP3972_AVRC_REG		0x25
 #define LP3972_CDTC1_REG	0x26
 #define LP3972_CDTC2_REG	0x27
 #define LP3972_SDTV1_REG	0x29
 #define LP3972_SDTV2_REG	0x2A
 #define LP3972_MDTV1_REG	0x32
 #define LP3972_MDTV2_REG	0x33
 #define LP3972_L2VCR_REG	0x39
 #define LP3972_L34VCR_REG	0x3A
 #define LP3972_SCR1_REG		0x80
 #define LP3972_SCR2_REG		0x81
 #define LP3972_OEN3_REG		0x82
 #define LP3972_OSR3_REG		0x83
 #define LP3972_LOER4_REG	0x84
 #define LP3972_B2TV_REG		0x85
 #define LP3972_B3TV_REG		0x86
 #define LP3972_B32RC_REG	0x87
 #define LP3972_ISRA_REG		0x88
 #define LP3972_BCCR_REG		0x89
 #define LP3972_II1RR_REG	0x8E
 #define LP3972_II2RR_REG	0x8F

 #define LP3972_SYS_CONTROL1_REG		LP3972_SCR1_REG
 /* System control register 1 initial value,
  * bits 5, 6 and 7 are EPROM programmable */
 #define SYS_CONTROL1_INIT_VAL		0x02
 #define SYS_CONTROL1_INIT_MASK		0x1F

 #define LP3972_VOL_CHANGE_REG		LP3972_VCC1_REG
 #define LP3972_VOL_CHANGE_FLAG_GO	0x01
 #define LP3972_VOL_CHANGE_FLAG_MASK	0x03

 /* LDO output enable mask */
 #define LP3972_OEN3_L1EN	BIT(0)
 #define LP3972_OVER2_LDO2_EN	BIT(2)
 #define LP3972_OVER2_LDO3_EN	BIT(3)
 #define LP3972_OVER2_LDO4_EN	BIT(4)
 #define LP3972_OVER1_S_EN	BIT(2)

 static const unsigned int ldo1_voltage_map[] = {
 	1700000, 1725000, 1750000, 1775000, 1800000, 1825000, 1850000, 1875000,
 	1900000, 1925000, 1950000, 1975000, 2000000,
 };

 static const unsigned int ldo23_voltage_map[] = {
 	1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
 	2600000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000,
 };

 static const unsigned int ldo4_voltage_map[] = {
 	1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1350000,
 	1400000, 1500000, 1800000, 1900000, 2500000, 2800000, 3000000, 3300000,
 };

 static const unsigned int ldo5_voltage_map[] = {
 	      0,       0,       0,       0,       0,  850000,  875000,  900000,
 	 925000,  950000,  975000, 1000000, 1025000, 1050000, 1075000, 1100000,
 	1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000,
 	1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000,
 };

 static const unsigned int buck1_voltage_map[] = {
 	 725000,  750000,  775000,  800000,  825000,  850000,  875000,  900000,
 	 925000,  950000,  975000, 1000000, 1025000, 1050000, 1075000, 1100000,
 	1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000,
 	1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000,
 };

 static const unsigned int buck23_voltage_map[] = {
 	      0,  800000,  850000,  900000,  950000, 1000000, 1050000, 1100000,
 	1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000,
 	1550000, 1600000, 1650000, 1700000, 1800000, 1900000, 2500000, 2800000,
 	3000000, 3300000,
 };

 static const int ldo_output_enable_mask[] = {
 	LP3972_OEN3_L1EN,
 	LP3972_OVER2_LDO2_EN,
 	LP3972_OVER2_LDO3_EN,
 	LP3972_OVER2_LDO4_EN,
 	LP3972_OVER1_S_EN,
 };

 static const int ldo_output_enable_addr[] = {
 	LP3972_OEN3_REG,
 	LP3972_OVER2_REG,
 	LP3972_OVER2_REG,
 	LP3972_OVER2_REG,
 	LP3972_OVER1_REG,
 };

 static const int ldo_vol_ctl_addr[] = {
 	LP3972_MDTV1_REG,
 	LP3972_L2VCR_REG,
 	LP3972_L34VCR_REG,
 	LP3972_L34VCR_REG,
 	LP3972_SDTV1_REG,
 };

 static const int buck_vol_enable_addr[] = {
 	LP3972_OVER1_REG,
 	LP3972_OEN3_REG,
 	LP3972_OEN3_REG,
 };

 static const int buck_base_addr[] = {
 	LP3972_ADTV1_REG,
 	LP3972_B2TV_REG,
 	LP3972_B3TV_REG,
 };

 #define LP3972_LDO_OUTPUT_ENABLE_MASK(x) (ldo_output_enable_mask[x])
 #define LP3972_LDO_OUTPUT_ENABLE_REG(x) (ldo_output_enable_addr[x])

 /*	LDO voltage control registers shift:
 	LP3972_LDO1 -> 0, LP3972_LDO2 -> 4
 	LP3972_LDO3 -> 0, LP3972_LDO4 -> 4
 	LP3972_LDO5 -> 0
 */
 #define LP3972_LDO_VOL_CONTR_SHIFT(x) (((x) & 1) << 2)
 #define LP3972_LDO_VOL_CONTR_REG(x) (ldo_vol_ctl_addr[x])
 #define LP3972_LDO_VOL_CHANGE_SHIFT(x) ((x) ? 4 : 6)

 #define LP3972_LDO_VOL_MASK(x) (((x) % 4) ? 0x0f : 0x1f)
 #define LP3972_LDO_VOL_MIN_IDX(x) (((x) == 4) ? 0x05 : 0x00)
 #define LP3972_LDO_VOL_MAX_IDX(x) ((x) ? (((x) == 4) ? 0x1f : 0x0f) : 0x0c)

 #define LP3972_BUCK_VOL_ENABLE_REG(x) (buck_vol_enable_addr[x])
 #define LP3972_BUCK_VOL1_REG(x) (buck_base_addr[x])
 #define LP3972_BUCK_VOL_MASK 0x1f

 static int lp3972_i2c_read(struct i2c_client *i2c, char reg, int count,
 	u16 *dest)
 {
 	int ret;

 	if (count != 1)
 		return -EIO;
 	ret = i2c_smbus_read_byte_data(i2c, reg);
 	if (ret < 0)
 		return ret;

 	*dest = ret;
 	return 0;
 }

 static int lp3972_i2c_write(struct i2c_client *i2c, char reg, int count,
 	const u16 *src)
 {
 	if (count != 1)
 		return -EIO;
 	return i2c_smbus_write_byte_data(i2c, reg, *src);
 }

 static u8 lp3972_reg_read(struct lp3972 *lp3972, u8 reg)
 {
 	u16 val = 0;

 	mutex_lock(&lp3972->io_lock);

 	lp3972_i2c_read(lp3972->i2c, reg, 1, &val);

 	dev_dbg(lp3972->dev, "reg read 0x%02x -> 0x%02x\n", (int)reg,
 		(unsigned)val & 0xff);

 	mutex_unlock(&lp3972->io_lock);

 	return val & 0xff;
 }

 static int lp3972_set_bits(struct lp3972 *lp3972, u8 reg, u16 mask, u16 val)
 {
 	u16 tmp;
 	int ret;

 	mutex_lock(&lp3972->io_lock);

 	ret = lp3972_i2c_read(lp3972->i2c, reg, 1, &tmp);
 	tmp = (tmp & ~mask) | val;
 	if (ret == 0) {
 		ret = lp3972_i2c_write(lp3972->i2c, reg, 1, &tmp);
 		dev_dbg(lp3972->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg,
 			(unsigned)val & 0xff);
 	}
 	mutex_unlock(&lp3972->io_lock);

 	return ret;
 }

 static int lp3972_ldo_is_enabled(struct regulator_dev *dev)
 {
 	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 	int ldo = rdev_get_id(dev) - LP3972_LDO1;
 	u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo);
 	u16 val;

 	val = lp3972_reg_read(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo));
 	return !!(val & mask);
 }

 static int lp3972_ldo_enable(struct regulator_dev *dev)
 {
 	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 	int ldo = rdev_get_id(dev) - LP3972_LDO1;
 	u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo);

 	return lp3972_set_bits(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo),
 				mask, mask);
 }

 static int lp3972_ldo_disable(struct regulator_dev *dev)
 {
 	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 	int ldo = rdev_get_id(dev) - LP3972_LDO1;
 	u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo);

 	return lp3972_set_bits(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo),
 				mask, 0);
 }

 static int lp3972_ldo_get_voltage_sel(struct regulator_dev *dev)
 {
 	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 	int ldo = rdev_get_id(dev) - LP3972_LDO1;
 	u16 mask = LP3972_LDO_VOL_MASK(ldo);
 	u16 val, reg;

 	reg = lp3972_reg_read(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo));
 	val = (reg >> LP3972_LDO_VOL_CONTR_SHIFT(ldo)) & mask;

 	return val;
 }

 static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev,
 				      unsigned int selector)
 {
 	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 	int ldo = rdev_get_id(dev) - LP3972_LDO1;
 	int shift, ret;

 	shift = LP3972_LDO_VOL_CONTR_SHIFT(ldo);
 	ret = lp3972_set_bits(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo),
 		LP3972_LDO_VOL_MASK(ldo) << shift, selector << shift);

 	if (ret)
 		return ret;

 	/*
 	 * LDO1 and LDO5 support voltage control by either target voltage1
 	 * or target voltage2 register.
 	 * We use target voltage1 register for LDO1 and LDO5 in this driver.
 	 * We need to update voltage change control register(0x20) to enable
 	 * LDO1 and LDO5 to change to their programmed target values.
 	 */
 	switch (ldo) {
 	case LP3972_LDO1:
 	case LP3972_LDO5:
 		shift = LP3972_LDO_VOL_CHANGE_SHIFT(ldo);
 		ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG,
 			LP3972_VOL_CHANGE_FLAG_MASK << shift,
 			LP3972_VOL_CHANGE_FLAG_GO << shift);
 		if (ret)
 			return ret;

 		ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG,
 			LP3972_VOL_CHANGE_FLAG_MASK << shift, 0);
 		break;
 	}

 	return ret;
 }

 static struct regulator_ops lp3972_ldo_ops = {
 	.list_voltage = regulator_list_voltage_table,
 	.is_enabled = lp3972_ldo_is_enabled,
 	.enable = lp3972_ldo_enable,
 	.disable = lp3972_ldo_disable,
 	.get_voltage_sel = lp3972_ldo_get_voltage_sel,
 	.set_voltage_sel = lp3972_ldo_set_voltage_sel,
 };

 static int lp3972_dcdc_is_enabled(struct regulator_dev *dev)
 {
 	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 	int buck = rdev_get_id(dev) - LP3972_DCDC1;
 	u16 mask = 1 << (buck * 2);
 	u16 val;

 	val = lp3972_reg_read(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck));
 	return !!(val & mask);
 }

 static int lp3972_dcdc_enable(struct regulator_dev *dev)
 {
 	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 	int buck = rdev_get_id(dev) - LP3972_DCDC1;
 	u16 mask = 1 << (buck * 2);
 	u16 val;

 	val = lp3972_set_bits(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck),
 				mask, mask);
 	return val;
 }

 static int lp3972_dcdc_disable(struct regulator_dev *dev)
 {
 	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 	int buck = rdev_get_id(dev) - LP3972_DCDC1;
 	u16 mask = 1 << (buck * 2);
 	u16 val;

 	val = lp3972_set_bits(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck),
 				mask, 0);
 	return val;
 }

 static int lp3972_dcdc_get_voltage_sel(struct regulator_dev *dev)
 {
 	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 	int buck = rdev_get_id(dev) - LP3972_DCDC1;
 	u16 reg;

 	reg = lp3972_reg_read(lp3972, LP3972_BUCK_VOL1_REG(buck));
 	reg &= LP3972_BUCK_VOL_MASK;

 	return reg;
 }

 static int lp3972_dcdc_set_voltage_sel(struct regulator_dev *dev,
 				       unsigned int selector)
 {
 	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 	int buck = rdev_get_id(dev) - LP3972_DCDC1;
 	int ret;

 	ret = lp3972_set_bits(lp3972, LP3972_BUCK_VOL1_REG(buck),
 				LP3972_BUCK_VOL_MASK, selector);
 	if (ret)
 		return ret;

 	if (buck != 0)
 		return ret;

 	ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG,
 		LP3972_VOL_CHANGE_FLAG_MASK, LP3972_VOL_CHANGE_FLAG_GO);
 	if (ret)
 		return ret;

 	return lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG,
 				LP3972_VOL_CHANGE_FLAG_MASK, 0);
 }

 static struct regulator_ops lp3972_dcdc_ops = {
 	.list_voltage = regulator_list_voltage_table,
 	.is_enabled = lp3972_dcdc_is_enabled,
 	.enable = lp3972_dcdc_enable,
 	.disable = lp3972_dcdc_disable,
 	.get_voltage_sel = lp3972_dcdc_get_voltage_sel,
 	.set_voltage_sel = lp3972_dcdc_set_voltage_sel,
 };

 static const struct regulator_desc regulators[] = {
 	{
 		.name = "LDO1",
 		.id = LP3972_LDO1,
 		.ops = &lp3972_ldo_ops,
 		.n_voltages = ARRAY_SIZE(ldo1_voltage_map),
 		.volt_table = ldo1_voltage_map,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 	},
 	{
 		.name = "LDO2",
 		.id = LP3972_LDO2,
 		.ops = &lp3972_ldo_ops,
 		.n_voltages = ARRAY_SIZE(ldo23_voltage_map),
 		.volt_table = ldo23_voltage_map,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 	},
 	{
 		.name = "LDO3",
 		.id = LP3972_LDO3,
 		.ops = &lp3972_ldo_ops,
 		.n_voltages = ARRAY_SIZE(ldo23_voltage_map),
 		.volt_table = ldo23_voltage_map,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 	},
 	{
 		.name = "LDO4",
 		.id = LP3972_LDO4,
 		.ops = &lp3972_ldo_ops,
 		.n_voltages = ARRAY_SIZE(ldo4_voltage_map),
 		.volt_table = ldo4_voltage_map,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 	},
 	{
 		.name = "LDO5",
 		.id = LP3972_LDO5,
 		.ops = &lp3972_ldo_ops,
 		.n_voltages = ARRAY_SIZE(ldo5_voltage_map),
 		.volt_table = ldo5_voltage_map,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 	},
 	{
 		.name = "DCDC1",
 		.id = LP3972_DCDC1,
 		.ops = &lp3972_dcdc_ops,
 		.n_voltages = ARRAY_SIZE(buck1_voltage_map),
 		.volt_table = buck1_voltage_map,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 	},
 	{
 		.name = "DCDC2",
 		.id = LP3972_DCDC2,
 		.ops = &lp3972_dcdc_ops,
 		.n_voltages = ARRAY_SIZE(buck23_voltage_map),
 		.volt_table = buck23_voltage_map,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 	},
 	{
 		.name = "DCDC3",
 		.id = LP3972_DCDC3,
 		.ops = &lp3972_dcdc_ops,
 		.n_voltages = ARRAY_SIZE(buck23_voltage_map),
 		.volt_table = buck23_voltage_map,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 	},
 };

 static int setup_regulators(struct lp3972 *lp3972,
 	struct lp3972_platform_data *pdata)
 {
 	int i, err;

 	lp3972->num_regulators = pdata->num_regulators;
 	lp3972->rdev = kcalloc(pdata->num_regulators,
 				sizeof(struct regulator_dev *), GFP_KERNEL);
 	if (!lp3972->rdev) {
 		err = -ENOMEM;
 		goto err_nomem;
 	}

 	/* Instantiate the regulators */
 	for (i = 0; i < pdata->num_regulators; i++) {
 		struct lp3972_regulator_subdev *reg = &pdata->regulators[i];
 		struct regulator_config config = { };

 		config.dev = lp3972->dev;
 		config.init_data = reg->initdata;
 		config.driver_data = lp3972;

 		lp3972->rdev[i] = regulator_register(&regulators[reg->id],
 						     &config);
 		if (IS_ERR(lp3972->rdev[i])) {
 			err = PTR_ERR(lp3972->rdev[i]);
 			dev_err(lp3972->dev, "regulator init failed: %d\n",
 				err);
 			goto error;
 		}
 	}

 	return 0;
 error:
 	while (--i >= 0)
 		regulator_unregister(lp3972->rdev[i]);
 	kfree(lp3972->rdev);
 	lp3972->rdev = NULL;
 err_nomem:
 	return err;
 }

 static int lp3972_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
 	struct lp3972 *lp3972;
 	struct lp3972_platform_data *pdata = i2c->dev.platform_data;
 	int ret;
 	u16 val;

 	if (!pdata) {
 		dev_dbg(&i2c->dev, "No platform init data supplied\n");
 		return -ENODEV;
 	}

 	lp3972 = kzalloc(sizeof(struct lp3972), GFP_KERNEL);
 	if (!lp3972)
 		return -ENOMEM;

 	lp3972->i2c = i2c;
 	lp3972->dev = &i2c->dev;

 	mutex_init(&lp3972->io_lock);

 	/* Detect LP3972 */
 	ret = lp3972_i2c_read(i2c, LP3972_SYS_CONTROL1_REG, 1, &val);
 	if (ret == 0 &&
 		(val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL) {
 		ret = -ENODEV;
 		dev_err(&i2c->dev, "chip reported: val = 0x%x\n", val);
 	}
 	if (ret < 0) {
 		dev_err(&i2c->dev, "failed to detect device. ret = %d\n", ret);
 		goto err_detect;
 	}

 	ret = setup_regulators(lp3972, pdata);
 	if (ret < 0)
 		goto err_detect;

 	i2c_set_clientdata(i2c, lp3972);
 	return 0;

 err_detect:
 	kfree(lp3972);
 	return ret;
 }

 static int lp3972_i2c_remove(struct i2c_client *i2c)
 {
 	struct lp3972 *lp3972 = i2c_get_clientdata(i2c);
 	int i;

 	for (i = 0; i < lp3972->num_regulators; i++)
 		regulator_unregister(lp3972->rdev[i]);
 	kfree(lp3972->rdev);
 	kfree(lp3972);

 	return 0;
 }

 static const struct i2c_device_id lp3972_i2c_id[] = {
 	{ "lp3972", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lp3972_i2c_id);

 static struct i2c_driver lp3972_i2c_driver = {
 	.driver = {
 		.name = "lp3972",
 		.owner = THIS_MODULE,
 	},
 	.probe    = lp3972_i2c_probe,
 	.remove   = lp3972_i2c_remove,
 	.id_table = lp3972_i2c_id,
 };

 static int __init lp3972_module_init(void)
 {
 	return i2c_add_driver(&lp3972_i2c_driver);
 }
 subsys_initcall(lp3972_module_init);

 static void __exit lp3972_module_exit(void)
 {
 	i2c_del_driver(&lp3972_i2c_driver);
 }
 module_exit(lp3972_module_exit);

 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Axel Lin <axel.lin@gmail.com>");
 MODULE_DESCRIPTION("LP3972 PMIC driver");
	/*
	* Regulator driver for National Semiconductors LP3972 PMIC chip
	*
	* Based on lp3971.c
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	*/

	#include <linux/bug.h>
	#include <linux/err.h>
	#include <linux/i2c.h>
	#include <linux/module.h>
	#include <linux/kernel.h>
	#include <linux/regulator/driver.h>
	#include <linux/regulator/lp3972.h>
	#include <linux/slab.h>

	struct lp3972 {
	struct device *dev;
	struct mutex io_lock;
	struct i2c_client *i2c;
	int num_regulators;
	struct regulator_dev **rdev;
	};

	/* LP3972 Control Registers */
	#define LP3972_SCR_REG 0x07
	#define LP3972_OVER1_REG 0x10
	#define LP3972_OVSR1_REG 0x11
	#define LP3972_OVER2_REG 0x12
	#define LP3972_OVSR2_REG 0x13
	#define LP3972_VCC1_REG 0x20
	#define LP3972_ADTV1_REG 0x23
	#define LP3972_ADTV2_REG 0x24
	#define LP3972_AVRC_REG 0x25
	#define LP3972_CDTC1_REG 0x26
	#define LP3972_CDTC2_REG 0x27
	#define LP3972_SDTV1_REG 0x29
	#define LP3972_SDTV2_REG 0x2A
	#define LP3972_MDTV1_REG 0x32
	#define LP3972_MDTV2_REG 0x33
	#define LP3972_L2VCR_REG 0x39
	#define LP3972_L34VCR_REG 0x3A
	#define LP3972_SCR1_REG 0x80
	#define LP3972_SCR2_REG 0x81
	#define LP3972_OEN3_REG 0x82
	#define LP3972_OSR3_REG 0x83
	#define LP3972_LOER4_REG 0x84
	#define LP3972_B2TV_REG 0x85
	#define LP3972_B3TV_REG 0x86
	#define LP3972_B32RC_REG 0x87
	#define LP3972_ISRA_REG 0x88
	#define LP3972_BCCR_REG 0x89
	#define LP3972_II1RR_REG 0x8E
	#define LP3972_II2RR_REG 0x8F

	#define LP3972_SYS_CONTROL1_REG LP3972_SCR1_REG
	/* System control register 1 initial value,
	* bits 5, 6 and 7 are EPROM programmable */
	#define SYS_CONTROL1_INIT_VAL 0x02
	#define SYS_CONTROL1_INIT_MASK 0x1F

	#define LP3972_VOL_CHANGE_REG LP3972_VCC1_REG
	#define LP3972_VOL_CHANGE_FLAG_GO 0x01
	#define LP3972_VOL_CHANGE_FLAG_MASK 0x03

	/* LDO output enable mask */
	#define LP3972_OEN3_L1EN BIT(0)
	#define LP3972_OVER2_LDO2_EN BIT(2)
	#define LP3972_OVER2_LDO3_EN BIT(3)
	#define LP3972_OVER2_LDO4_EN BIT(4)
	#define LP3972_OVER1_S_EN BIT(2)

	static const unsigned int ldo1_voltage_map[] = {
	1700000, 1725000, 1750000, 1775000, 1800000, 1825000, 1850000, 1875000,
	1900000, 1925000, 1950000, 1975000, 2000000,
	};

	static const unsigned int ldo23_voltage_map[] = {
	1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
	2600000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000,
	};

	static const unsigned int ldo4_voltage_map[] = {
	1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1350000,
	1400000, 1500000, 1800000, 1900000, 2500000, 2800000, 3000000, 3300000,
	};

	static const unsigned int ldo5_voltage_map[] = {
	0, 0, 0, 0, 0, 850000, 875000, 900000,
	925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000,
	1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000,
	1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000,
	};

	static const unsigned int buck1_voltage_map[] = {
	725000, 750000, 775000, 800000, 825000, 850000, 875000, 900000,
	925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000,
	1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000,
	1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000,
	};

	static const unsigned int buck23_voltage_map[] = {
	0, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000,
	1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000,
	1550000, 1600000, 1650000, 1700000, 1800000, 1900000, 2500000, 2800000,
	3000000, 3300000,
	};

	static const int ldo_output_enable_mask[] = {
	LP3972_OEN3_L1EN,
	LP3972_OVER2_LDO2_EN,
	LP3972_OVER2_LDO3_EN,
	LP3972_OVER2_LDO4_EN,
	LP3972_OVER1_S_EN,
	};

	static const int ldo_output_enable_addr[] = {
	LP3972_OEN3_REG,
	LP3972_OVER2_REG,
	LP3972_OVER2_REG,
	LP3972_OVER2_REG,
	LP3972_OVER1_REG,
	};

	static const int ldo_vol_ctl_addr[] = {
	LP3972_MDTV1_REG,
	LP3972_L2VCR_REG,
	LP3972_L34VCR_REG,
	LP3972_L34VCR_REG,
	LP3972_SDTV1_REG,
	};

	static const int buck_vol_enable_addr[] = {
	LP3972_OVER1_REG,
	LP3972_OEN3_REG,
	LP3972_OEN3_REG,
	};

	static const int buck_base_addr[] = {
	LP3972_ADTV1_REG,
	LP3972_B2TV_REG,
	LP3972_B3TV_REG,
	};

	#define LP3972_LDO_OUTPUT_ENABLE_MASK(x) (ldo_output_enable_mask[x])
	#define LP3972_LDO_OUTPUT_ENABLE_REG(x) (ldo_output_enable_addr[x])

	/* LDO voltage control registers shift:
	LP3972_LDO1 -> 0, LP3972_LDO2 -> 4
	LP3972_LDO3 -> 0, LP3972_LDO4 -> 4
	LP3972_LDO5 -> 0
	*/
	#define LP3972_LDO_VOL_CONTR_SHIFT(x) (((x) & 1) << 2)
	#define LP3972_LDO_VOL_CONTR_REG(x) (ldo_vol_ctl_addr[x])
	#define LP3972_LDO_VOL_CHANGE_SHIFT(x) ((x) ? 4 : 6)

	#define LP3972_LDO_VOL_MASK(x) (((x) % 4) ? 0x0f : 0x1f)
	#define LP3972_LDO_VOL_MIN_IDX(x) (((x) == 4) ? 0x05 : 0x00)
	#define LP3972_LDO_VOL_MAX_IDX(x) ((x) ? (((x) == 4) ? 0x1f : 0x0f) : 0x0c)

	#define LP3972_BUCK_VOL_ENABLE_REG(x) (buck_vol_enable_addr[x])
	#define LP3972_BUCK_VOL1_REG(x) (buck_base_addr[x])
	#define LP3972_BUCK_VOL_MASK 0x1f

	static int lp3972_i2c_read(struct i2c_client *i2c, char reg, int count,
	u16 *dest)
	{
	int ret;

	if (count != 1)
	return -EIO;
	ret = i2c_smbus_read_byte_data(i2c, reg);
	if (ret < 0)
	return ret;

	*dest = ret;
	return 0;
	}

	static int lp3972_i2c_write(struct i2c_client *i2c, char reg, int count,
	const u16 *src)
	{
	if (count != 1)
	return -EIO;
	return i2c_smbus_write_byte_data(i2c, reg, *src);
	}

	static u8 lp3972_reg_read(struct lp3972 *lp3972, u8 reg)
	{
	u16 val = 0;

	mutex_lock(&lp3972->io_lock);

	lp3972_i2c_read(lp3972->i2c, reg, 1, &val);

	dev_dbg(lp3972->dev, "reg read 0x%02x -> 0x%02x\n", (int)reg,
	(unsigned)val & 0xff);

	mutex_unlock(&lp3972->io_lock);

	return val & 0xff;
	}

	static int lp3972_set_bits(struct lp3972 *lp3972, u8 reg, u16 mask, u16 val)
	{
	u16 tmp;
	int ret;

	mutex_lock(&lp3972->io_lock);

	ret = lp3972_i2c_read(lp3972->i2c, reg, 1, &tmp);
	tmp = (tmp & ~mask) \| val;
	if (ret == 0) {
	ret = lp3972_i2c_write(lp3972->i2c, reg, 1, &tmp);
	dev_dbg(lp3972->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg,
	(unsigned)val & 0xff);
	}
	mutex_unlock(&lp3972->io_lock);

	return ret;
	}

	static int lp3972_ldo_is_enabled(struct regulator_dev *dev)
	{
	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
	int ldo = rdev_get_id(dev) - LP3972_LDO1;
	u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo);
	u16 val;

	val = lp3972_reg_read(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo));
	return !!(val & mask);
	}

	static int lp3972_ldo_enable(struct regulator_dev *dev)
	{
	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
	int ldo = rdev_get_id(dev) - LP3972_LDO1;
	u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo);

	return lp3972_set_bits(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo),
	mask, mask);
	}

	static int lp3972_ldo_disable(struct regulator_dev *dev)
	{
	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
	int ldo = rdev_get_id(dev) - LP3972_LDO1;
	u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo);

	return lp3972_set_bits(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo),
	mask, 0);
	}

	static int lp3972_ldo_get_voltage_sel(struct regulator_dev *dev)
	{
	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
	int ldo = rdev_get_id(dev) - LP3972_LDO1;
	u16 mask = LP3972_LDO_VOL_MASK(ldo);
	u16 val, reg;

	reg = lp3972_reg_read(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo));
	val = (reg >> LP3972_LDO_VOL_CONTR_SHIFT(ldo)) & mask;

	return val;
	}

	static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev,
	unsigned int selector)
	{
	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
	int ldo = rdev_get_id(dev) - LP3972_LDO1;
	int shift, ret;

	shift = LP3972_LDO_VOL_CONTR_SHIFT(ldo);
	ret = lp3972_set_bits(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo),
	LP3972_LDO_VOL_MASK(ldo) << shift, selector << shift);

	if (ret)
	return ret;

	/*
	* LDO1 and LDO5 support voltage control by either target voltage1
	* or target voltage2 register.
	* We use target voltage1 register for LDO1 and LDO5 in this driver.
	* We need to update voltage change control register(0x20) to enable
	* LDO1 and LDO5 to change to their programmed target values.
	*/
	switch (ldo) {
	case LP3972_LDO1:
	case LP3972_LDO5:
	shift = LP3972_LDO_VOL_CHANGE_SHIFT(ldo);
	ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG,
	LP3972_VOL_CHANGE_FLAG_MASK << shift,
	LP3972_VOL_CHANGE_FLAG_GO << shift);
	if (ret)
	return ret;

	ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG,
	LP3972_VOL_CHANGE_FLAG_MASK << shift, 0);
	break;
	}

	return ret;
	}

	static struct regulator_ops lp3972_ldo_ops = {
	.list_voltage = regulator_list_voltage_table,
	.is_enabled = lp3972_ldo_is_enabled,
	.enable = lp3972_ldo_enable,
	.disable = lp3972_ldo_disable,
	.get_voltage_sel = lp3972_ldo_get_voltage_sel,
	.set_voltage_sel = lp3972_ldo_set_voltage_sel,
	};

	static int lp3972_dcdc_is_enabled(struct regulator_dev *dev)
	{
	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
	int buck = rdev_get_id(dev) - LP3972_DCDC1;
	u16 mask = 1 << (buck * 2);
	u16 val;

	val = lp3972_reg_read(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck));
	return !!(val & mask);
	}

	static int lp3972_dcdc_enable(struct regulator_dev *dev)
	{
	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
	int buck = rdev_get_id(dev) - LP3972_DCDC1;
	u16 mask = 1 << (buck * 2);
	u16 val;

	val = lp3972_set_bits(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck),
	mask, mask);
	return val;
	}

	static int lp3972_dcdc_disable(struct regulator_dev *dev)
	{
	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
	int buck = rdev_get_id(dev) - LP3972_DCDC1;
	u16 mask = 1 << (buck * 2);
	u16 val;

	val = lp3972_set_bits(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck),
	mask, 0);
	return val;
	}

	static int lp3972_dcdc_get_voltage_sel(struct regulator_dev *dev)
	{
	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
	int buck = rdev_get_id(dev) - LP3972_DCDC1;
	u16 reg;

	reg = lp3972_reg_read(lp3972, LP3972_BUCK_VOL1_REG(buck));
	reg &= LP3972_BUCK_VOL_MASK;

	return reg;
	}

	static int lp3972_dcdc_set_voltage_sel(struct regulator_dev *dev,
	unsigned int selector)
	{
	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
	int buck = rdev_get_id(dev) - LP3972_DCDC1;
	int ret;

	ret = lp3972_set_bits(lp3972, LP3972_BUCK_VOL1_REG(buck),
	LP3972_BUCK_VOL_MASK, selector);
	if (ret)
	return ret;

	if (buck != 0)
	return ret;

	ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG,
	LP3972_VOL_CHANGE_FLAG_MASK, LP3972_VOL_CHANGE_FLAG_GO);
	if (ret)
	return ret;

	return lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG,
	LP3972_VOL_CHANGE_FLAG_MASK, 0);
	}

	static struct regulator_ops lp3972_dcdc_ops = {
	.list_voltage = regulator_list_voltage_table,
	.is_enabled = lp3972_dcdc_is_enabled,
	.enable = lp3972_dcdc_enable,
	.disable = lp3972_dcdc_disable,
	.get_voltage_sel = lp3972_dcdc_get_voltage_sel,
	.set_voltage_sel = lp3972_dcdc_set_voltage_sel,
	};

	static const struct regulator_desc regulators[] = {
	{
	.name = "LDO1",
	.id = LP3972_LDO1,
	.ops = &lp3972_ldo_ops,
	.n_voltages = ARRAY_SIZE(ldo1_voltage_map),
	.volt_table = ldo1_voltage_map,
	.type = REGULATOR_VOLTAGE,
	.owner = THIS_MODULE,
	},
	{
	.name = "LDO2",
	.id = LP3972_LDO2,
	.ops = &lp3972_ldo_ops,
	.n_voltages = ARRAY_SIZE(ldo23_voltage_map),
	.volt_table = ldo23_voltage_map,
	.type = REGULATOR_VOLTAGE,
	.owner = THIS_MODULE,
	},
	{
	.name = "LDO3",
	.id = LP3972_LDO3,
	.ops = &lp3972_ldo_ops,
	.n_voltages = ARRAY_SIZE(ldo23_voltage_map),
	.volt_table = ldo23_voltage_map,
	.type = REGULATOR_VOLTAGE,
	.owner = THIS_MODULE,
	},
	{
	.name = "LDO4",
	.id = LP3972_LDO4,
	.ops = &lp3972_ldo_ops,
	.n_voltages = ARRAY_SIZE(ldo4_voltage_map),
	.volt_table = ldo4_voltage_map,
	.type = REGULATOR_VOLTAGE,
	.owner = THIS_MODULE,
	},
	{
	.name = "LDO5",
	.id = LP3972_LDO5,
	.ops = &lp3972_ldo_ops,
	.n_voltages = ARRAY_SIZE(ldo5_voltage_map),
	.volt_table = ldo5_voltage_map,
	.type = REGULATOR_VOLTAGE,
	.owner = THIS_MODULE,
	},
	{
	.name = "DCDC1",
	.id = LP3972_DCDC1,
	.ops = &lp3972_dcdc_ops,
	.n_voltages = ARRAY_SIZE(buck1_voltage_map),
	.volt_table = buck1_voltage_map,
	.type = REGULATOR_VOLTAGE,
	.owner = THIS_MODULE,
	},
	{
	.name = "DCDC2",
	.id = LP3972_DCDC2,
	.ops = &lp3972_dcdc_ops,
	.n_voltages = ARRAY_SIZE(buck23_voltage_map),
	.volt_table = buck23_voltage_map,
	.type = REGULATOR_VOLTAGE,
	.owner = THIS_MODULE,
	},
	{
	.name = "DCDC3",
	.id = LP3972_DCDC3,
	.ops = &lp3972_dcdc_ops,
	.n_voltages = ARRAY_SIZE(buck23_voltage_map),
	.volt_table = buck23_voltage_map,
	.type = REGULATOR_VOLTAGE,
	.owner = THIS_MODULE,
	},
	};

	static int setup_regulators(struct lp3972 *lp3972,
	struct lp3972_platform_data *pdata)
	{
	int i, err;

	lp3972->num_regulators = pdata->num_regulators;
	lp3972->rdev = kcalloc(pdata->num_regulators,
	sizeof(struct regulator_dev *), GFP_KERNEL);
	if (!lp3972->rdev) {
	err = -ENOMEM;
	goto err_nomem;
	}

	/* Instantiate the regulators */
	for (i = 0; i < pdata->num_regulators; i++) {
	struct lp3972_regulator_subdev *reg = &pdata->regulators[i];
	struct regulator_config config = { };

	config.dev = lp3972->dev;
	config.init_data = reg->initdata;
	config.driver_data = lp3972;

	lp3972->rdev[i] = regulator_register(&regulators[reg->id],
	&config);
	if (IS_ERR(lp3972->rdev[i])) {
	err = PTR_ERR(lp3972->rdev[i]);
	dev_err(lp3972->dev, "regulator init failed: %d\n",
	err);
	goto error;
	}
	}

	return 0;
	error:
	while (--i >= 0)
	regulator_unregister(lp3972->rdev[i]);
	kfree(lp3972->rdev);
	lp3972->rdev = NULL;
	err_nomem:
	return err;
	}

	static int lp3972_i2c_probe(struct i2c_client *i2c,
	const struct i2c_device_id *id)
	{
	struct lp3972 *lp3972;
	struct lp3972_platform_data *pdata = i2c->dev.platform_data;
	int ret;
	u16 val;

	if (!pdata) {
	dev_dbg(&i2c->dev, "No platform init data supplied\n");
	return -ENODEV;
	}

	lp3972 = kzalloc(sizeof(struct lp3972), GFP_KERNEL);
	if (!lp3972)
	return -ENOMEM;

	lp3972->i2c = i2c;
	lp3972->dev = &i2c->dev;

	mutex_init(&lp3972->io_lock);

	/* Detect LP3972 */
	ret = lp3972_i2c_read(i2c, LP3972_SYS_CONTROL1_REG, 1, &val);
	if (ret == 0 &&
	(val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL) {
	ret = -ENODEV;
	dev_err(&i2c->dev, "chip reported: val = 0x%x\n", val);
	}
	if (ret < 0) {
	dev_err(&i2c->dev, "failed to detect device. ret = %d\n", ret);
	goto err_detect;
	}

	ret = setup_regulators(lp3972, pdata);
	if (ret < 0)
	goto err_detect;

	i2c_set_clientdata(i2c, lp3972);
	return 0;

	err_detect:
	kfree(lp3972);
	return ret;
	}

	static int lp3972_i2c_remove(struct i2c_client *i2c)
	{
	struct lp3972 *lp3972 = i2c_get_clientdata(i2c);
	int i;

	for (i = 0; i < lp3972->num_regulators; i++)
	regulator_unregister(lp3972->rdev[i]);
	kfree(lp3972->rdev);
	kfree(lp3972);

	return 0;
	}

	static const struct i2c_device_id lp3972_i2c_id[] = {
	{ "lp3972", 0 },
	{ }
	};
	MODULE_DEVICE_TABLE(i2c, lp3972_i2c_id);

	static struct i2c_driver lp3972_i2c_driver = {
	.driver = {
	.name = "lp3972",
	.owner = THIS_MODULE,
	},
	.probe = lp3972_i2c_probe,
	.remove = lp3972_i2c_remove,
	.id_table = lp3972_i2c_id,
	};

	static int __init lp3972_module_init(void)
	{
	return i2c_add_driver(&lp3972_i2c_driver);
	}
	subsys_initcall(lp3972_module_init);

	static void __exit lp3972_module_exit(void)
	{
	i2c_del_driver(&lp3972_i2c_driver);
	}
	module_exit(lp3972_module_exit);

	MODULE_LICENSE("GPL");
	MODULE_AUTHOR("Axel Lin <axel.lin@gmail.com>");
	MODULE_DESCRIPTION("LP3972 PMIC driver");