include/linux/clocksource.h - kernel/msm-4.9 - Gitiles

 /*  linux/include/linux/clocksource.h
  *
  *  This file contains the structure definitions for clocksources.
  *
  *  If you are not a clocksource, or timekeeping code, you should
  *  not be including this file!
  */
 #ifndef _LINUX_CLOCKSOURCE_H
 #define _LINUX_CLOCKSOURCE_H

 #include <linux/types.h>
 #include <linux/timex.h>
 #include <linux/time.h>
 #include <linux/list.h>
 #include <linux/cache.h>
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <asm/div64.h>
 #include <asm/io.h>

 struct clocksource;
 struct module;

 #ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
 #include <asm/clocksource.h>
 #endif

 /**
  * struct clocksource - hardware abstraction for a free running counter
  *	Provides mostly state-free accessors to the underlying hardware.
  *	This is the structure used for system time.
  *
  * @name:		ptr to clocksource name
  * @list:		list head for registration
  * @rating:		rating value for selection (higher is better)
  *			To avoid rating inflation the following
  *			list should give you a guide as to how
  *			to assign your clocksource a rating
  *			1-99: Unfit for real use
  *				Only available for bootup and testing purposes.
  *			100-199: Base level usability.
  *				Functional for real use, but not desired.
  *			200-299: Good.
  *				A correct and usable clocksource.
  *			300-399: Desired.
  *				A reasonably fast and accurate clocksource.
  *			400-499: Perfect
  *				The ideal clocksource. A must-use where
  *				available.
  * @read:		returns a cycle value, passes clocksource as argument
  * @enable:		optional function to enable the clocksource
  * @disable:		optional function to disable the clocksource
  * @mask:		bitmask for two's complement
  *			subtraction of non 64 bit counters
  * @mult:		cycle to nanosecond multiplier
  * @shift:		cycle to nanosecond divisor (power of two)
  * @max_idle_ns:	max idle time permitted by the clocksource (nsecs)
  * @maxadj:		maximum adjustment value to mult (~11%)
  * @max_cycles:		maximum safe cycle value which won't overflow on multiplication
  * @flags:		flags describing special properties
  * @archdata:		arch-specific data
  * @suspend:		suspend function for the clocksource, if necessary
  * @resume:		resume function for the clocksource, if necessary
  * @owner:		module reference, must be set by clocksource in modules
  */
 struct clocksource {
 	/*
 	 * Hotpath data, fits in a single cache line when the
 	 * clocksource itself is cacheline aligned.
 	 */
 	cycle_t (*read)(struct clocksource *cs);
 	cycle_t mask;
 	u32 mult;
 	u32 shift;
 	u64 max_idle_ns;
 	u32 maxadj;
 #ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
 	struct arch_clocksource_data archdata;
 #endif
 	u64 max_cycles;
 	const char *name;
 	struct list_head list;
 	int rating;
 	int (*enable)(struct clocksource *cs);
 	void (*disable)(struct clocksource *cs);
 	unsigned long flags;
 	void (*suspend)(struct clocksource *cs);
 	void (*resume)(struct clocksource *cs);

 	/* private: */
 #ifdef CONFIG_CLOCKSOURCE_WATCHDOG
 	/* Watchdog related data, used by the framework */
 	struct list_head wd_list;
 	cycle_t cs_last;
 	cycle_t wd_last;
 #endif
 	struct module *owner;
 } ____cacheline_aligned;

 /*
  * Clock source flags bits::
  */
 #define CLOCK_SOURCE_IS_CONTINUOUS		0x01
 #define CLOCK_SOURCE_MUST_VERIFY		0x02

 #define CLOCK_SOURCE_WATCHDOG			0x10
 #define CLOCK_SOURCE_VALID_FOR_HRES		0x20
 #define CLOCK_SOURCE_UNSTABLE			0x40
 #define CLOCK_SOURCE_SUSPEND_NONSTOP		0x80
 #define CLOCK_SOURCE_RESELECT			0x100

 /* simplify initialization of mask field */
 #define CLOCKSOURCE_MASK(bits) (cycle_t)((bits) < 64 ? ((1ULL<<(bits))-1) : -1)

 /**
  * clocksource_khz2mult - calculates mult from khz and shift
  * @khz:		Clocksource frequency in KHz
  * @shift_constant:	Clocksource shift factor
  *
  * Helper functions that converts a khz counter frequency to a timsource
  * multiplier, given the clocksource shift value
  */
 static inline u32 clocksource_khz2mult(u32 khz, u32 shift_constant)
 {
 	/*  khz = cyc/(Million ns)
 	 *  mult/2^shift  = ns/cyc
 	 *  mult = ns/cyc * 2^shift
 	 *  mult = 1Million/khz * 2^shift
 	 *  mult = 1000000 * 2^shift / khz
 	 *  mult = (1000000<<shift) / khz
 	 */
 	u64 tmp = ((u64)1000000) << shift_constant;

 	tmp += khz/2; /* round for do_div */
 	do_div(tmp, khz);

 	return (u32)tmp;
 }

 /**
  * clocksource_hz2mult - calculates mult from hz and shift
  * @hz:			Clocksource frequency in Hz
  * @shift_constant:	Clocksource shift factor
  *
  * Helper functions that converts a hz counter
  * frequency to a timsource multiplier, given the
  * clocksource shift value
  */
 static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant)
 {
 	/*  hz = cyc/(Billion ns)
 	 *  mult/2^shift  = ns/cyc
 	 *  mult = ns/cyc * 2^shift
 	 *  mult = 1Billion/hz * 2^shift
 	 *  mult = 1000000000 * 2^shift / hz
 	 *  mult = (1000000000<<shift) / hz
 	 */
 	u64 tmp = ((u64)1000000000) << shift_constant;

 	tmp += hz/2; /* round for do_div */
 	do_div(tmp, hz);

 	return (u32)tmp;
 }

 /**
  * clocksource_cyc2ns - converts clocksource cycles to nanoseconds
  * @cycles:	cycles
  * @mult:	cycle to nanosecond multiplier
  * @shift:	cycle to nanosecond divisor (power of two)
  *
  * Converts cycles to nanoseconds, using the given mult and shift.
  *
  * XXX - This could use some mult_lxl_ll() asm optimization
  */
 static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift)
 {
 	return ((u64) cycles * mult) >> shift;
 }


 extern int clocksource_unregister(struct clocksource*);
 extern void clocksource_touch_watchdog(void);
 extern void clocksource_change_rating(struct clocksource *cs, int rating);
 extern void clocksource_suspend(void);
 extern void clocksource_resume(void);
 extern struct clocksource * __init clocksource_default_clock(void);
 extern void clocksource_mark_unstable(struct clocksource *cs);

 extern u64
 clocks_calc_max_nsecs(u32 mult, u32 shift, u32 maxadj, u64 mask, u64 *max_cycles);
 extern void
 clocks_calc_mult_shift(u32 *mult, u32 *shift, u32 from, u32 to, u32 minsec);

 /*
  * Don't call __clocksource_register_scale directly, use
  * clocksource_register_hz/khz
  */
 extern int
 __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq);
 extern void
 __clocksource_update_freq_scale(struct clocksource *cs, u32 scale, u32 freq);

 /*
  * Don't call this unless you are a default clocksource
  * (AKA: jiffies) and absolutely have to.
  */
 static inline int __clocksource_register(struct clocksource *cs)
 {
 	return __clocksource_register_scale(cs, 1, 0);
 }

 static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
 {
 	return __clocksource_register_scale(cs, 1, hz);
 }

 static inline int clocksource_register_khz(struct clocksource *cs, u32 khz)
 {
 	return __clocksource_register_scale(cs, 1000, khz);
 }

 static inline void __clocksource_update_freq_hz(struct clocksource *cs, u32 hz)
 {
 	__clocksource_update_freq_scale(cs, 1, hz);
 }

 static inline void __clocksource_update_freq_khz(struct clocksource *cs, u32 khz)
 {
 	__clocksource_update_freq_scale(cs, 1000, khz);
 }


 extern int timekeeping_notify(struct clocksource *clock);

 extern cycle_t clocksource_mmio_readl_up(struct clocksource *);
 extern cycle_t clocksource_mmio_readl_down(struct clocksource *);
 extern cycle_t clocksource_mmio_readw_up(struct clocksource *);
 extern cycle_t clocksource_mmio_readw_down(struct clocksource *);

 extern int clocksource_mmio_init(void __iomem *, const char *,
 	unsigned long, int, unsigned, cycle_t (*)(struct clocksource *));

 extern int clocksource_i8253_init(void);

 #define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \
 	OF_DECLARE_1(clksrc, name, compat, fn)

 #ifdef CONFIG_CLKSRC_PROBE
 extern void clocksource_probe(void);
 #else
 static inline void clocksource_probe(void) {}
 #endif

 #define CLOCKSOURCE_ACPI_DECLARE(name, table_id, fn)		\
 	ACPI_DECLARE_PROBE_ENTRY(clksrc, name, table_id, 0, NULL, 0, fn)

 #endif /* _LINUX_CLOCKSOURCE_H */
	/* linux/include/linux/clocksource.h
	*
	* This file contains the structure definitions for clocksources.
	*
	* If you are not a clocksource, or timekeeping code, you should
	* not be including this file!
	*/
	#ifndef _LINUX_CLOCKSOURCE_H
	#define _LINUX_CLOCKSOURCE_H

	#include <linux/types.h>
	#include <linux/timex.h>
	#include <linux/time.h>
	#include <linux/list.h>
	#include <linux/cache.h>
	#include <linux/timer.h>
	#include <linux/init.h>
	#include <asm/div64.h>
	#include <asm/io.h>

	struct clocksource;
	struct module;

	#ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
	#include <asm/clocksource.h>
	#endif

	/**
	* struct clocksource - hardware abstraction for a free running counter
	* Provides mostly state-free accessors to the underlying hardware.
	* This is the structure used for system time.
	*
	* @name: ptr to clocksource name
	* @list: list head for registration
	* @rating: rating value for selection (higher is better)
	* To avoid rating inflation the following
	* list should give you a guide as to how
	* to assign your clocksource a rating
	* 1-99: Unfit for real use
	* Only available for bootup and testing purposes.
	* 100-199: Base level usability.
	* Functional for real use, but not desired.
	* 200-299: Good.
	* A correct and usable clocksource.
	* 300-399: Desired.
	* A reasonably fast and accurate clocksource.
	* 400-499: Perfect
	* The ideal clocksource. A must-use where
	* available.
	* @read: returns a cycle value, passes clocksource as argument
	* @enable: optional function to enable the clocksource
	* @disable: optional function to disable the clocksource
	* @mask: bitmask for two's complement
	* subtraction of non 64 bit counters
	* @mult: cycle to nanosecond multiplier
	* @shift: cycle to nanosecond divisor (power of two)
	* @max_idle_ns: max idle time permitted by the clocksource (nsecs)
	* @maxadj: maximum adjustment value to mult (~11%)
	* @max_cycles: maximum safe cycle value which won't overflow on multiplication
	* @flags: flags describing special properties
	* @archdata: arch-specific data
	* @suspend: suspend function for the clocksource, if necessary
	* @resume: resume function for the clocksource, if necessary
	* @owner: module reference, must be set by clocksource in modules
	*/
	struct clocksource {
	/*
	* Hotpath data, fits in a single cache line when the
	* clocksource itself is cacheline aligned.
	*/
	cycle_t (read)(struct clocksource cs);
	cycle_t mask;
	u32 mult;
	u32 shift;
	u64 max_idle_ns;
	u32 maxadj;
	#ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
	struct arch_clocksource_data archdata;
	#endif
	u64 max_cycles;
	const char *name;
	struct list_head list;
	int rating;
	int (enable)(struct clocksource cs);
	void (disable)(struct clocksource cs);
	unsigned long flags;
	void (suspend)(struct clocksource cs);
	void (resume)(struct clocksource cs);

	/* private: */
	#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
	/* Watchdog related data, used by the framework */
	struct list_head wd_list;
	cycle_t cs_last;
	cycle_t wd_last;
	#endif
	struct module *owner;
	} ____cacheline_aligned;

	/*
	* Clock source flags bits::
	*/
	#define CLOCK_SOURCE_IS_CONTINUOUS 0x01
	#define CLOCK_SOURCE_MUST_VERIFY 0x02

	#define CLOCK_SOURCE_WATCHDOG 0x10
	#define CLOCK_SOURCE_VALID_FOR_HRES 0x20
	#define CLOCK_SOURCE_UNSTABLE 0x40
	#define CLOCK_SOURCE_SUSPEND_NONSTOP 0x80
	#define CLOCK_SOURCE_RESELECT 0x100

	/* simplify initialization of mask field */
	#define CLOCKSOURCE_MASK(bits) (cycle_t)((bits) < 64 ? ((1ULL<<(bits))-1) : -1)

	/**
	* clocksource_khz2mult - calculates mult from khz and shift
	* @khz: Clocksource frequency in KHz
	* @shift_constant: Clocksource shift factor
	*
	* Helper functions that converts a khz counter frequency to a timsource
	* multiplier, given the clocksource shift value
	*/
	static inline u32 clocksource_khz2mult(u32 khz, u32 shift_constant)
	{
	/* khz = cyc/(Million ns)
	* mult/2^shift = ns/cyc
	* mult = ns/cyc * 2^shift
	* mult = 1Million/khz * 2^shift
	* mult = 1000000 * 2^shift / khz
	* mult = (1000000<<shift) / khz
	*/
	u64 tmp = ((u64)1000000) << shift_constant;

	tmp += khz/2; /* round for do_div */
	do_div(tmp, khz);

	return (u32)tmp;
	}

	/**
	* clocksource_hz2mult - calculates mult from hz and shift
	* @hz: Clocksource frequency in Hz
	* @shift_constant: Clocksource shift factor
	*
	* Helper functions that converts a hz counter
	* frequency to a timsource multiplier, given the
	* clocksource shift value
	*/
	static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant)
	{
	/* hz = cyc/(Billion ns)
	* mult/2^shift = ns/cyc
	* mult = ns/cyc * 2^shift
	* mult = 1Billion/hz * 2^shift
	* mult = 1000000000 * 2^shift / hz
	* mult = (1000000000<<shift) / hz
	*/
	u64 tmp = ((u64)1000000000) << shift_constant;

	tmp += hz/2; /* round for do_div */
	do_div(tmp, hz);

	return (u32)tmp;
	}

	/**
	* clocksource_cyc2ns - converts clocksource cycles to nanoseconds
	* @cycles: cycles
	* @mult: cycle to nanosecond multiplier
	* @shift: cycle to nanosecond divisor (power of two)
	*
	* Converts cycles to nanoseconds, using the given mult and shift.
	*
	* XXX - This could use some mult_lxl_ll() asm optimization
	*/
	static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift)
	{
	return ((u64) cycles * mult) >> shift;
	}


	extern int clocksource_unregister(struct clocksource*);
	extern void clocksource_touch_watchdog(void);
	extern void clocksource_change_rating(struct clocksource *cs, int rating);
	extern void clocksource_suspend(void);
	extern void clocksource_resume(void);
	extern struct clocksource * __init clocksource_default_clock(void);
	extern void clocksource_mark_unstable(struct clocksource *cs);

	extern u64
	clocks_calc_max_nsecs(u32 mult, u32 shift, u32 maxadj, u64 mask, u64 *max_cycles);
	extern void
	clocks_calc_mult_shift(u32 mult, u32 shift, u32 from, u32 to, u32 minsec);

	/*
	* Don't call __clocksource_register_scale directly, use
	* clocksource_register_hz/khz
	*/
	extern int
	__clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq);
	extern void
	__clocksource_update_freq_scale(struct clocksource *cs, u32 scale, u32 freq);

	/*
	* Don't call this unless you are a default clocksource
	* (AKA: jiffies) and absolutely have to.
	*/
	static inline int __clocksource_register(struct clocksource *cs)
	{
	return __clocksource_register_scale(cs, 1, 0);
	}

	static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
	{
	return __clocksource_register_scale(cs, 1, hz);
	}

	static inline int clocksource_register_khz(struct clocksource *cs, u32 khz)
	{
	return __clocksource_register_scale(cs, 1000, khz);
	}

	static inline void __clocksource_update_freq_hz(struct clocksource *cs, u32 hz)
	{
	__clocksource_update_freq_scale(cs, 1, hz);
	}

	static inline void __clocksource_update_freq_khz(struct clocksource *cs, u32 khz)
	{
	__clocksource_update_freq_scale(cs, 1000, khz);
	}


	extern int timekeeping_notify(struct clocksource *clock);

	extern cycle_t clocksource_mmio_readl_up(struct clocksource *);
	extern cycle_t clocksource_mmio_readl_down(struct clocksource *);
	extern cycle_t clocksource_mmio_readw_up(struct clocksource *);
	extern cycle_t clocksource_mmio_readw_down(struct clocksource *);

	extern int clocksource_mmio_init(void __iomem , const char ,
	unsigned long, int, unsigned, cycle_t ()(struct clocksource ));

	extern int clocksource_i8253_init(void);

	#define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \
	OF_DECLARE_1(clksrc, name, compat, fn)

	#ifdef CONFIG_CLKSRC_PROBE
	extern void clocksource_probe(void);
	#else
	static inline void clocksource_probe(void) {}
	#endif

	#define CLOCKSOURCE_ACPI_DECLARE(name, table_id, fn) \
	ACPI_DECLARE_PROBE_ENTRY(clksrc, name, table_id, 0, NULL, 0, fn)

	#endif /* _LINUX_CLOCKSOURCE_H */