[PATCH] kill _INLINE_
This patch removes all occurances of _INLINE_ in the kernel.
With the exception of tty_flip.h, I've simply removed the inline's since
gcc should know best which functions to be inlined.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index be12623..8970014 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -481,8 +481,6 @@
#include "serial_compat.h"
#endif
-#define _INLINE_ inline
-
struct tty_driver *serial_driver;
/* serial subtype definitions */
@@ -591,8 +589,6 @@
static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
static int rs_write(struct tty_struct * tty, int from_user,
const unsigned char *buf, int count);
-extern _INLINE_ int rs_raw_write(struct tty_struct * tty, int from_user,
- const unsigned char *buf, int count);
#ifdef CONFIG_ETRAX_RS485
static int e100_write_rs485(struct tty_struct * tty, int from_user,
const unsigned char *buf, int count);
@@ -1538,8 +1534,7 @@
/* the tx DMA uses only dma_descr interrupt */
-static _INLINE_ void
-e100_disable_txdma_irq(struct e100_serial *info)
+static void e100_disable_txdma_irq(struct e100_serial *info)
{
#ifdef SERIAL_DEBUG_INTR
printk("txdma_irq(%d): 0\n",info->line);
@@ -1548,8 +1543,7 @@
*R_IRQ_MASK2_CLR = info->irq;
}
-static _INLINE_ void
-e100_enable_txdma_irq(struct e100_serial *info)
+static void e100_enable_txdma_irq(struct e100_serial *info)
{
#ifdef SERIAL_DEBUG_INTR
printk("txdma_irq(%d): 1\n",info->line);
@@ -1558,8 +1552,7 @@
*R_IRQ_MASK2_SET = info->irq;
}
-static _INLINE_ void
-e100_disable_txdma_channel(struct e100_serial *info)
+static void e100_disable_txdma_channel(struct e100_serial *info)
{
unsigned long flags;
@@ -1599,8 +1592,7 @@
}
-static _INLINE_ void
-e100_enable_txdma_channel(struct e100_serial *info)
+static void e100_enable_txdma_channel(struct e100_serial *info)
{
unsigned long flags;
@@ -1625,8 +1617,7 @@
restore_flags(flags);
}
-static _INLINE_ void
-e100_disable_rxdma_channel(struct e100_serial *info)
+static void e100_disable_rxdma_channel(struct e100_serial *info)
{
unsigned long flags;
@@ -1665,8 +1656,7 @@
}
-static _INLINE_ void
-e100_enable_rxdma_channel(struct e100_serial *info)
+static void e100_enable_rxdma_channel(struct e100_serial *info)
{
unsigned long flags;
@@ -1913,9 +1903,7 @@
* This routine is used by the interrupt handler to schedule
* processing in the software interrupt portion of the driver.
*/
-static _INLINE_ void
-rs_sched_event(struct e100_serial *info,
- int event)
+static void rs_sched_event(struct e100_serial *info, int event)
{
if (info->event & (1 << event))
return;
@@ -2155,8 +2143,9 @@
return 1;
}
-extern _INLINE_ unsigned int
-handle_descr_data(struct e100_serial *info, struct etrax_dma_descr *descr, unsigned int recvl)
+static unsigned int handle_descr_data(struct e100_serial *info,
+ struct etrax_dma_descr *descr,
+ unsigned int recvl)
{
struct etrax_recv_buffer *buffer = phys_to_virt(descr->buf) - sizeof *buffer;
@@ -2182,8 +2171,7 @@
return recvl;
}
-static _INLINE_ unsigned int
-handle_all_descr_data(struct e100_serial *info)
+static unsigned int handle_all_descr_data(struct e100_serial *info)
{
struct etrax_dma_descr *descr;
unsigned int recvl;
@@ -2230,8 +2218,7 @@
return ret;
}
-static _INLINE_ void
-receive_chars_dma(struct e100_serial *info)
+static void receive_chars_dma(struct e100_serial *info)
{
struct tty_struct *tty;
unsigned char rstat;
@@ -2292,8 +2279,7 @@
*info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart);
}
-static _INLINE_ int
-start_recv_dma(struct e100_serial *info)
+static int start_recv_dma(struct e100_serial *info)
{
struct etrax_dma_descr *descr = info->rec_descr;
struct etrax_recv_buffer *buffer;
@@ -2348,11 +2334,6 @@
}
-static _INLINE_ void
-status_handle(struct e100_serial *info, unsigned short status)
-{
-}
-
/* the bits in the MASK2 register are laid out like this:
DMAI_EOP DMAI_DESCR DMAO_EOP DMAO_DESCR
where I is the input channel and O is the output channel for the port.
@@ -2454,8 +2435,7 @@
return IRQ_RETVAL(handled);
} /* rec_interrupt */
-static _INLINE_ int
-force_eop_if_needed(struct e100_serial *info)
+static int force_eop_if_needed(struct e100_serial *info)
{
/* We check data_avail bit to determine if data has
* arrived since last time
@@ -2499,8 +2479,7 @@
return 1;
}
-extern _INLINE_ void
-flush_to_flip_buffer(struct e100_serial *info)
+static void flush_to_flip_buffer(struct e100_serial *info)
{
struct tty_struct *tty;
struct etrax_recv_buffer *buffer;
@@ -2611,8 +2590,7 @@
tty_flip_buffer_push(tty);
}
-static _INLINE_ void
-check_flush_timeout(struct e100_serial *info)
+static void check_flush_timeout(struct e100_serial *info)
{
/* Flip what we've got (if we can) */
flush_to_flip_buffer(info);
@@ -2741,7 +2719,7 @@
*/
-extern _INLINE_
+static
struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info)
{
unsigned long data_read;
@@ -2875,8 +2853,7 @@
return info;
}
-extern _INLINE_
-struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
+static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
{
unsigned char rstat;
@@ -2995,7 +2972,7 @@
return info;
} /* handle_ser_rx_interrupt */
-extern _INLINE_ void handle_ser_tx_interrupt(struct e100_serial *info)
+static void handle_ser_tx_interrupt(struct e100_serial *info)
{
unsigned long flags;
@@ -3621,9 +3598,8 @@
restore_flags(flags);
}
-extern _INLINE_ int
-rs_raw_write(struct tty_struct * tty, int from_user,
- const unsigned char *buf, int count)
+static int rs_raw_write(struct tty_struct * tty, int from_user,
+ const unsigned char *buf, int count)
{
int c, ret = 0;
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
@@ -4710,7 +4686,7 @@
* /proc fs routines....
*/
-extern _INLINE_ int line_info(char *buf, struct e100_serial *info)
+static int line_info(char *buf, struct e100_serial *info)
{
char stat_buf[30];
int ret;