[MIPS] MT: Improved multithreading support.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index a7bac04..f9be549 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1447,6 +1447,10 @@
prompt "MIPS MT options"
depends on MIPS_MT
+config MIPS_MT_SMTC
+ bool "SMTC: Use all TCs on all VPEs for SMP"
+ select SMP
+
config MIPS_MT_SMP
bool "Use 1 TC on each available VPE for SMP"
select SMP
@@ -1613,7 +1617,7 @@
config SMP
bool "Multi-Processing support"
- depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP
+ depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP || MIPS_MT_SMTC
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 9ec01de..34e8a25 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -34,7 +34,9 @@
obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_MIPS_MT_SMP) += smp_mt.o
+obj-$(CONFIG_MIPS_MT) += mips-mt.o
+obj-$(CONFIG_MIPS_MT_SMTC) += smtc.o smtc-asm.o smtc-proc.o
+obj-$(CONFIG_MIPS_MT_SMP) += smp-mt.o
obj-$(CONFIG_MIPS_APSP_KSPD) += kspd.o
obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index ca6b03c..92b28b6 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -69,6 +69,9 @@
offset("#define PT_BVADDR ", struct pt_regs, cp0_badvaddr);
offset("#define PT_STATUS ", struct pt_regs, cp0_status);
offset("#define PT_CAUSE ", struct pt_regs, cp0_cause);
+#ifdef CONFIG_MIPS_MT_SMTC
+ offset("#define PT_TCSTATUS ", struct pt_regs, cp0_tcstatus);
+#endif /* CONFIG_MIPS_MT_SMTC */
size("#define PT_SIZE ", struct pt_regs);
linefeed;
}
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index b1939a4..d101d2f 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -17,6 +17,9 @@
#include <asm/isadep.h>
#include <asm/thread_info.h>
#include <asm/war.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif
#ifdef CONFIG_PREEMPT
.macro preempt_stop
@@ -75,6 +78,37 @@
bnez t0, syscall_exit_work
FEXPORT(restore_all) # restore full frame
+#ifdef CONFIG_MIPS_MT_SMTC
+/* Detect and execute deferred IPI "interrupts" */
+ move a0,sp
+ jal deferred_smtc_ipi
+/* Re-arm any temporarily masked interrupts not explicitly "acked" */
+ mfc0 v0, CP0_TCSTATUS
+ ori v1, v0, TCSTATUS_IXMT
+ mtc0 v1, CP0_TCSTATUS
+ andi v0, TCSTATUS_IXMT
+ ehb
+ mfc0 t0, CP0_TCCONTEXT
+ DMT 9 # dmt t1
+ jal mips_ihb
+ mfc0 t2, CP0_STATUS
+ andi t3, t0, 0xff00
+ or t2, t2, t3
+ mtc0 t2, CP0_STATUS
+ ehb
+ andi t1, t1, VPECONTROL_TE
+ beqz t1, 1f
+ EMT
+1:
+ mfc0 v1, CP0_TCSTATUS
+ /* We set IXMT above, XOR should cler it here */
+ xori v1, v1, TCSTATUS_IXMT
+ or v1, v0, v1
+ mtc0 v1, CP0_TCSTATUS
+ ehb
+ xor t0, t0, t3
+ mtc0 t0, CP0_TCCONTEXT
+#endif /* CONFIG_MIPS_MT_SMTC */
.set noat
RESTORE_TEMP
RESTORE_AT
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
index 235ad9f..10f28fb 100644
--- a/arch/mips/kernel/gdb-low.S
+++ b/arch/mips/kernel/gdb-low.S
@@ -283,11 +283,33 @@
*/
3:
+#ifdef CONFIG_MIPS_MT_SMTC
+ /* Read-modify write of Status must be atomic */
+ mfc0 t2, CP0_TCSTATUS
+ ori t1, t2, TCSTATUS_IXMT
+ mtc0 t1, CP0_TCSTATUS
+ andi t2, t2, TCSTATUS_IXMT
+ ehb
+ DMT 9 # dmt t1
+ jal mips_ihb
+ nop
+#endif /* CONFIG_MIPS_MT_SMTC */
mfc0 t0, CP0_STATUS
ori t0, 0x1f
xori t0, 0x1f
mtc0 t0, CP0_STATUS
-
+#ifdef CONFIG_MIPS_MT_SMTC
+ andi t1, t1, VPECONTROL_TE
+ beqz t1, 9f
+ nop
+ EMT # emt
+9:
+ mfc0 t1, CP0_TCSTATUS
+ xori t1, t1, TCSTATUS_IXMT
+ or t1, t1, t2
+ mtc0 t1, CP0_TCSTATUS
+ ehb
+#endif /* CONFIG_MIPS_MT_SMTC */
LONG_L v0, GDB_FR_STATUS(sp)
LONG_L v1, GDB_FR_EPC(sp)
mtc0 v0, CP0_STATUS
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
index d4f88e0..6ecbdc1 100644
--- a/arch/mips/kernel/gdb-stub.c
+++ b/arch/mips/kernel/gdb-stub.c
@@ -140,6 +140,7 @@
#include <asm/system.h>
#include <asm/gdb-stub.h>
#include <asm/inst.h>
+#include <asm/smp.h>
/*
* external low-level support routines
@@ -669,6 +670,64 @@
local_irq_restore(flags);
}
+/*
+ * GDB stub needs to call kgdb_wait on all processor with interrupts
+ * disabled, so it uses it's own special variant.
+ */
+static int kgdb_smp_call_kgdb_wait(void)
+{
+#ifdef CONFIG_SMP
+ struct call_data_struct data;
+ int i, cpus = num_online_cpus() - 1;
+ int cpu = smp_processor_id();
+
+ /*
+ * Can die spectacularly if this CPU isn't yet marked online
+ */
+ BUG_ON(!cpu_online(cpu));
+
+ if (!cpus)
+ return 0;
+
+ if (spin_is_locked(&smp_call_lock)) {
+ /*
+ * Some other processor is trying to make us do something
+ * but we're not going to respond... give up
+ */
+ return -1;
+ }
+
+ /*
+ * We will continue here, accepting the fact that
+ * the kernel may deadlock if another CPU attempts
+ * to call smp_call_function now...
+ */
+
+ data.func = kgdb_wait;
+ data.info = NULL;
+ atomic_set(&data.started, 0);
+ data.wait = 0;
+
+ spin_lock(&smp_call_lock);
+ call_data = &data;
+ mb();
+
+ /* Send a message to all other CPUs and wait for them to respond */
+ for (i = 0; i < NR_CPUS; i++)
+ if (cpu_online(i) && i != cpu)
+ core_send_ipi(i, SMP_CALL_FUNCTION);
+
+ /* Wait for response */
+ /* FIXME: lock-up detection, backtrace on lock-up */
+ while (atomic_read(&data.started) != cpus)
+ barrier();
+
+ call_data = NULL;
+ spin_unlock(&smp_call_lock);
+#endif
+
+ return 0;
+}
/*
* This function does all command processing for interfacing to gdb. It
@@ -718,7 +777,7 @@
/*
* force other cpus to enter kgdb
*/
- smp_call_function(kgdb_wait, NULL, 0, 0);
+ kgdb_smp_call_kgdb_wait();
/*
* If we're in breakpoint() increment the PC
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index 04418b6..ff7af36 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <asm/asm.h>
+#include <asm/asmmacro.h>
#include <asm/cacheops.h>
#include <asm/regdef.h>
#include <asm/fpregdef.h>
@@ -171,6 +172,15 @@
SAVE_AT
.set push
.set noreorder
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * To keep from blindly blocking *all* interrupts
+ * during service by SMTC kernel, we also want to
+ * pass the IM value to be cleared.
+ */
+EXPORT(except_vec_vi_mori)
+ ori a0, $0, 0
+#endif /* CONFIG_MIPS_MT_SMTC */
EXPORT(except_vec_vi_lui)
lui v0, 0 /* Patched */
j except_vec_vi_handler
@@ -187,6 +197,25 @@
NESTED(except_vec_vi_handler, 0, sp)
SAVE_TEMP
SAVE_STATIC
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * SMTC has an interesting problem that interrupts are level-triggered,
+ * and the CLI macro will clear EXL, potentially causing a duplicate
+ * interrupt service invocation. So we need to clear the associated
+ * IM bit of Status prior to doing CLI, and restore it after the
+ * service routine has been invoked - we must assume that the
+ * service routine will have cleared the state, and any active
+ * level represents a new or otherwised unserviced event...
+ */
+ mfc0 t1, CP0_STATUS
+ and t0, a0, t1
+ mfc0 t2, CP0_TCCONTEXT
+ or t0, t0, t2
+ mtc0 t0, CP0_TCCONTEXT
+ xor t1, t1, t0
+ mtc0 t1, CP0_STATUS
+ ehb
+#endif /* CONFIG_MIPS_MT_SMTC */
CLI
move a0, sp
jalr v0
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 2e9122a..bdf6f6e 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -18,6 +18,7 @@
#include <linux/threads.h>
#include <asm/asm.h>
+#include <asm/asmmacro.h>
#include <asm/regdef.h>
#include <asm/page.h>
#include <asm/mipsregs.h>
@@ -82,12 +83,33 @@
*/
.macro setup_c0_status set clr
.set push
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * For SMTC, we need to set privilege and disable interrupts only for
+ * the current TC, using the TCStatus register.
+ */
+ mfc0 t0, CP0_TCSTATUS
+ /* Fortunately CU 0 is in the same place in both registers */
+ /* Set TCU0, TMX, TKSU (for later inversion) and IXMT */
+ li t1, ST0_CU0 | 0x08001c00
+ or t0, t1
+ /* Clear TKSU, leave IXMT */
+ xori t0, 0x00001800
+ mtc0 t0, CP0_TCSTATUS
+ ehb
+ /* We need to leave the global IE bit set, but clear EXL...*/
+ mfc0 t0, CP0_STATUS
+ or t0, ST0_CU0 | ST0_EXL | ST0_ERL | \set | \clr
+ xor t0, ST0_EXL | ST0_ERL | \clr
+ mtc0 t0, CP0_STATUS
+#else
mfc0 t0, CP0_STATUS
or t0, ST0_CU0|\set|0x1f|\clr
xor t0, 0x1f|\clr
mtc0 t0, CP0_STATUS
.set noreorder
sll zero,3 # ehb
+#endif
.set pop
.endm
@@ -134,6 +156,24 @@
ARC64_TWIDDLE_PC
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * In SMTC kernel, "CLI" is thread-specific, in TCStatus.
+ * We still need to enable interrupts globally in Status,
+ * and clear EXL/ERL.
+ *
+ * TCContext is used to track interrupt levels under
+ * service in SMTC kernel. Clear for boot TC before
+ * allowing any interrupts.
+ */
+ mtc0 zero, CP0_TCCONTEXT
+
+ mfc0 t0, CP0_STATUS
+ ori t0, t0, 0xff1f
+ xori t0, t0, 0x001e
+ mtc0 t0, CP0_STATUS
+#endif /* CONFIG_MIPS_MT_SMTC */
+
PTR_LA t0, __bss_start # clear .bss
LONG_S zero, (t0)
PTR_LA t1, __bss_stop - LONGSIZE
@@ -166,8 +206,25 @@
* function after setting up the stack and gp registers.
*/
NESTED(smp_bootstrap, 16, sp)
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * Read-modify-writes of Status must be atomic, and this
+ * is one case where CLI is invoked without EXL being
+ * necessarily set. The CLI and setup_c0_status will
+ * in fact be redundant for all but the first TC of
+ * each VPE being booted.
+ */
+ DMT 10 # dmt t2 /* t0, t1 are used by CLI and setup_c0_status() */
+ jal mips_ihb
+#endif /* CONFIG_MIPS_MT_SMTC */
setup_c0_status_sec
smp_slave_setup
+#ifdef CONFIG_MIPS_MT_SMTC
+ andi t2, t2, VPECONTROL_TE
+ beqz t2, 2f
+ EMT # emt
+2:
+#endif /* CONFIG_MIPS_MT_SMTC */
j start_secondary
END(smp_bootstrap)
#endif /* CONFIG_SMP */
diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c
index b974ac9..2125ba5f 100644
--- a/arch/mips/kernel/i8259.c
+++ b/arch/mips/kernel/i8259.c
@@ -187,6 +187,10 @@
outb(cached_21,0x21);
outb(0x60+irq,0x20); /* 'Specific EOI' to master */
}
+#ifdef CONFIG_MIPS_MT_SMTC
+ if (irq_hwmask[irq] & ST0_IM)
+ set_c0_status(irq_hwmask[irq] & ST0_IM);
+#endif /* CONFIG_MIPS_MT_SMTC */
spin_unlock_irqrestore(&i8259A_lock, flags);
return;
diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c
index 3f653c7..97ebdc7 100644
--- a/arch/mips/kernel/irq-msc01.c
+++ b/arch/mips/kernel/irq-msc01.c
@@ -76,6 +76,11 @@
mask_msc_irq(irq);
if (!cpu_has_veic)
MSCIC_WRITE(MSC01_IC_EOI, 0);
+#ifdef CONFIG_MIPS_MT_SMTC
+ /* This actually needs to be a call into platform code */
+ if (irq_hwmask[irq] & ST0_IM)
+ set_c0_status(irq_hwmask[irq] & ST0_IM);
+#endif /* CONFIG_MIPS_MT_SMTC */
}
/*
@@ -92,6 +97,10 @@
MSCIC_WRITE(MSC01_IC_SUP+irq*8, r | ~MSC01_IC_SUP_EDGE_BIT);
MSCIC_WRITE(MSC01_IC_SUP+irq*8, r);
}
+#ifdef CONFIG_MIPS_MT_SMTC
+ if (irq_hwmask[irq] & ST0_IM)
+ set_c0_status(irq_hwmask[irq] & ST0_IM);
+#endif /* CONFIG_MIPS_MT_SMTC */
}
/*
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index e0efc4f..3dce742 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -38,6 +38,15 @@
atomic_t irq_err_count;
+#ifdef CONFIG_MIPS_MT_SMTC
+/*
+ * SMTC Kernel needs to manipulate low-level CPU interrupt mask
+ * in do_IRQ. These are passed in setup_irq_smtc() and stored
+ * in this table.
+ */
+unsigned long irq_hwmask[NR_IRQS];
+#endif /* CONFIG_MIPS_MT_SMTC */
+
#undef do_IRQ
/*
@@ -49,6 +58,7 @@
{
irq_enter();
+ __DO_IRQ_SMTC_HOOK();
__do_IRQ(irq, regs);
irq_exit();
@@ -129,6 +139,9 @@
irq_desc[i].depth = 1;
irq_desc[i].handler = &no_irq_type;
spin_lock_init(&irq_desc[i].lock);
+#ifdef CONFIG_MIPS_MT_SMTC
+ irq_hwmask[i] = 0;
+#endif /* CONFIG_MIPS_MT_SMTC */
}
arch_init_irq();
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
new file mode 100644
index 0000000..02237a6
--- /dev/null
+++ b/arch/mips/kernel/mips-mt.c
@@ -0,0 +1,449 @@
+/*
+ * General MIPS MT support routines, usable in AP/SP, SMVP, or SMTC kernels
+ * Copyright (C) 2005 Mips Technologies, Inc
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#include <asm/mipsmtregs.h>
+#include <asm/r4kcache.h>
+#include <asm/cacheflush.h>
+
+/*
+ * CPU mask used to set process affinity for MT VPEs/TCs with FPUs
+ */
+
+cpumask_t mt_fpu_cpumask;
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <asm/uaccess.h>
+
+unsigned long mt_fpemul_threshold = 0;
+
+/*
+ * Replacement functions for the sys_sched_setaffinity() and
+ * sys_sched_getaffinity() system calls, so that we can integrate
+ * FPU affinity with the user's requested processor affinity.
+ * This code is 98% identical with the sys_sched_setaffinity()
+ * and sys_sched_getaffinity() system calls, and should be
+ * updated when kernel/sched.c changes.
+ */
+
+/*
+ * find_process_by_pid - find a process with a matching PID value.
+ * used in sys_sched_set/getaffinity() in kernel/sched.c, so
+ * cloned here.
+ */
+static inline task_t *find_process_by_pid(pid_t pid)
+{
+ return pid ? find_task_by_pid(pid) : current;
+}
+
+
+/*
+ * mipsmt_sys_sched_setaffinity - set the cpu affinity of a process
+ */
+asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
+ unsigned long __user *user_mask_ptr)
+{
+ cpumask_t new_mask;
+ cpumask_t effective_mask;
+ int retval;
+ task_t *p;
+
+ if (len < sizeof(new_mask))
+ return -EINVAL;
+
+ if (copy_from_user(&new_mask, user_mask_ptr, sizeof(new_mask)))
+ return -EFAULT;
+
+ lock_cpu_hotplug();
+ read_lock(&tasklist_lock);
+
+ p = find_process_by_pid(pid);
+ if (!p) {
+ read_unlock(&tasklist_lock);
+ unlock_cpu_hotplug();
+ return -ESRCH;
+ }
+
+ /*
+ * It is not safe to call set_cpus_allowed with the
+ * tasklist_lock held. We will bump the task_struct's
+ * usage count and drop tasklist_lock before invoking
+ * set_cpus_allowed.
+ */
+ get_task_struct(p);
+
+ retval = -EPERM;
+ if ((current->euid != p->euid) && (current->euid != p->uid) &&
+ !capable(CAP_SYS_NICE)) {
+ read_unlock(&tasklist_lock);
+ goto out_unlock;
+ }
+
+ /* Record new user-specified CPU set for future reference */
+ p->thread.user_cpus_allowed = new_mask;
+
+ /* Unlock the task list */
+ read_unlock(&tasklist_lock);
+
+ /* Compute new global allowed CPU set if necessary */
+ if( (p->thread.mflags & MF_FPUBOUND)
+ && cpus_intersects(new_mask, mt_fpu_cpumask)) {
+ cpus_and(effective_mask, new_mask, mt_fpu_cpumask);
+ retval = set_cpus_allowed(p, effective_mask);
+ } else {
+ p->thread.mflags &= ~MF_FPUBOUND;
+ retval = set_cpus_allowed(p, new_mask);
+ }
+
+
+out_unlock:
+ put_task_struct(p);
+ unlock_cpu_hotplug();
+ return retval;
+}
+
+/*
+ * mipsmt_sys_sched_getaffinity - get the cpu affinity of a process
+ */
+asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len,
+ unsigned long __user *user_mask_ptr)
+{
+ unsigned int real_len;
+ cpumask_t mask;
+ int retval;
+ task_t *p;
+
+ real_len = sizeof(mask);
+ if (len < real_len)
+ return -EINVAL;
+
+ lock_cpu_hotplug();
+ read_lock(&tasklist_lock);
+
+ retval = -ESRCH;
+ p = find_process_by_pid(pid);
+ if (!p)
+ goto out_unlock;
+
+ retval = 0;
+
+ cpus_and(mask, p->thread.user_cpus_allowed, cpu_possible_map);
+
+out_unlock:
+ read_unlock(&tasklist_lock);
+ unlock_cpu_hotplug();
+ if (retval)
+ return retval;
+ if (copy_to_user(user_mask_ptr, &mask, real_len))
+ return -EFAULT;
+ return real_len;
+}
+
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+/*
+ * Dump new MIPS MT state for the core. Does not leave TCs halted.
+ * Takes an argument which taken to be a pre-call MVPControl value.
+ */
+
+void mips_mt_regdump(unsigned long mvpctl)
+{
+ unsigned long flags;
+ unsigned long vpflags;
+ unsigned long mvpconf0;
+ int nvpe;
+ int ntc;
+ int i;
+ int tc;
+ unsigned long haltval;
+ unsigned long tcstatval;
+#ifdef CONFIG_MIPS_MT_SMTC
+ void smtc_soft_dump(void);
+#endif /* CONFIG_MIPT_MT_SMTC */
+
+ local_irq_save(flags);
+ vpflags = dvpe();
+ printk("=== MIPS MT State Dump ===\n");
+ printk("-- Global State --\n");
+ printk(" MVPControl Passed: %08lx\n", mvpctl);
+ printk(" MVPControl Read: %08lx\n", vpflags);
+ printk(" MVPConf0 : %08lx\n", (mvpconf0 = read_c0_mvpconf0()));
+ nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+ ntc = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
+ printk("-- per-VPE State --\n");
+ for(i = 0; i < nvpe; i++) {
+ for(tc = 0; tc < ntc; tc++) {
+ settc(tc);
+ if((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) {
+ printk(" VPE %d\n", i);
+ printk(" VPEControl : %08lx\n", read_vpe_c0_vpecontrol());
+ printk(" VPEConf0 : %08lx\n", read_vpe_c0_vpeconf0());
+ printk(" VPE%d.Status : %08lx\n",
+ i, read_vpe_c0_status());
+ printk(" VPE%d.EPC : %08lx\n", i, read_vpe_c0_epc());
+ printk(" VPE%d.Cause : %08lx\n", i, read_vpe_c0_cause());
+ printk(" VPE%d.Config7 : %08lx\n",
+ i, read_vpe_c0_config7());
+ break; /* Next VPE */
+ }
+ }
+ }
+ printk("-- per-TC State --\n");
+ for(tc = 0; tc < ntc; tc++) {
+ settc(tc);
+ if(read_tc_c0_tcbind() == read_c0_tcbind()) {
+ /* Are we dumping ourself? */
+ haltval = 0; /* Then we're not halted, and mustn't be */
+ tcstatval = flags; /* And pre-dump TCStatus is flags */
+ printk(" TC %d (current TC with VPE EPC above)\n", tc);
+ } else {
+ haltval = read_tc_c0_tchalt();
+ write_tc_c0_tchalt(1);
+ tcstatval = read_tc_c0_tcstatus();
+ printk(" TC %d\n", tc);
+ }
+ printk(" TCStatus : %08lx\n", tcstatval);
+ printk(" TCBind : %08lx\n", read_tc_c0_tcbind());
+ printk(" TCRestart : %08lx\n", read_tc_c0_tcrestart());
+ printk(" TCHalt : %08lx\n", haltval);
+ printk(" TCContext : %08lx\n", read_tc_c0_tccontext());
+ if (!haltval)
+ write_tc_c0_tchalt(0);
+ }
+#ifdef CONFIG_MIPS_MT_SMTC
+ smtc_soft_dump();
+#endif /* CONFIG_MIPT_MT_SMTC */
+ printk("===========================\n");
+ evpe(vpflags);
+ local_irq_restore(flags);
+}
+
+static int mt_opt_norps = 0;
+static int mt_opt_rpsctl = -1;
+static int mt_opt_nblsu = -1;
+static int mt_opt_forceconfig7 = 0;
+static int mt_opt_config7 = -1;
+
+static int __init rps_disable(char *s)
+{
+ mt_opt_norps = 1;
+ return 1;
+}
+__setup("norps", rps_disable);
+
+static int __init rpsctl_set(char *str)
+{
+ get_option(&str, &mt_opt_rpsctl);
+ return 1;
+}
+__setup("rpsctl=", rpsctl_set);
+
+static int __init nblsu_set(char *str)
+{
+ get_option(&str, &mt_opt_nblsu);
+ return 1;
+}
+__setup("nblsu=", nblsu_set);
+
+static int __init config7_set(char *str)
+{
+ get_option(&str, &mt_opt_config7);
+ mt_opt_forceconfig7 = 1;
+ return 1;
+}
+__setup("config7=", config7_set);
+
+/* Experimental cache flush control parameters that should go away some day */
+int mt_protiflush = 0;
+int mt_protdflush = 0;
+int mt_n_iflushes = 1;
+int mt_n_dflushes = 1;
+
+static int __init set_protiflush(char *s)
+{
+ mt_protiflush = 1;
+ return 1;
+}
+__setup("protiflush", set_protiflush);
+
+static int __init set_protdflush(char *s)
+{
+ mt_protdflush = 1;
+ return 1;
+}
+__setup("protdflush", set_protdflush);
+
+static int __init niflush(char *s)
+{
+ get_option(&s, &mt_n_iflushes);
+ return 1;
+}
+__setup("niflush=", niflush);
+
+static int __init ndflush(char *s)
+{
+ get_option(&s, &mt_n_dflushes);
+ return 1;
+}
+__setup("ndflush=", ndflush);
+#ifdef CONFIG_MIPS_MT_FPAFF
+static int fpaff_threshold = -1;
+
+static int __init fpaff_thresh(char *str)
+{
+ get_option(&str, &fpaff_threshold);
+ return 1;
+}
+
+__setup("fpaff=", fpaff_thresh);
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+static unsigned int itc_base = 0;
+
+static int __init set_itc_base(char *str)
+{
+ get_option(&str, &itc_base);
+ return 1;
+}
+
+__setup("itcbase=", set_itc_base);
+
+void mips_mt_set_cpuoptions(void)
+{
+ unsigned int oconfig7 = read_c0_config7();
+ unsigned int nconfig7 = oconfig7;
+
+ if (mt_opt_norps) {
+ printk("\"norps\" option deprectated: use \"rpsctl=\"\n");
+ }
+ if (mt_opt_rpsctl >= 0) {
+ printk("34K return prediction stack override set to %d.\n",
+ mt_opt_rpsctl);
+ if (mt_opt_rpsctl)
+ nconfig7 |= (1 << 2);
+ else
+ nconfig7 &= ~(1 << 2);
+ }
+ if (mt_opt_nblsu >= 0) {
+ printk("34K ALU/LSU sync override set to %d.\n", mt_opt_nblsu);
+ if (mt_opt_nblsu)
+ nconfig7 |= (1 << 5);
+ else
+ nconfig7 &= ~(1 << 5);
+ }
+ if (mt_opt_forceconfig7) {
+ printk("CP0.Config7 forced to 0x%08x.\n", mt_opt_config7);
+ nconfig7 = mt_opt_config7;
+ }
+ if (oconfig7 != nconfig7) {
+ __asm__ __volatile("sync");
+ write_c0_config7(nconfig7);
+ ehb ();
+ printk("Config7: 0x%08x\n", read_c0_config7());
+ }
+
+ /* Report Cache management debug options */
+ if (mt_protiflush)
+ printk("I-cache flushes single-threaded\n");
+ if (mt_protdflush)
+ printk("D-cache flushes single-threaded\n");
+ if (mt_n_iflushes != 1)
+ printk("I-Cache Flushes Repeated %d times\n", mt_n_iflushes);
+ if (mt_n_dflushes != 1)
+ printk("D-Cache Flushes Repeated %d times\n", mt_n_dflushes);
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+ /* FPU Use Factor empirically derived from experiments on 34K */
+#define FPUSEFACTOR 333
+
+ if (fpaff_threshold >= 0) {
+ mt_fpemul_threshold = fpaff_threshold;
+ } else {
+ mt_fpemul_threshold =
+ (FPUSEFACTOR * (loops_per_jiffy/(500000/HZ))) / HZ;
+ }
+ printk("FPU Affinity set after %ld emulations\n",
+ mt_fpemul_threshold);
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+ if (itc_base != 0) {
+ /*
+ * Configure ITC mapping. This code is very
+ * specific to the 34K core family, which uses
+ * a special mode bit ("ITC") in the ErrCtl
+ * register to enable access to ITC control
+ * registers via cache "tag" operations.
+ */
+ unsigned long ectlval;
+ unsigned long itcblkgrn;
+
+ /* ErrCtl register is known as "ecc" to Linux */
+ ectlval = read_c0_ecc();
+ write_c0_ecc(ectlval | (0x1 << 26));
+ ehb();
+#define INDEX_0 (0x80000000)
+#define INDEX_8 (0x80000008)
+ /* Read "cache tag" for Dcache pseudo-index 8 */
+ cache_op(Index_Load_Tag_D, INDEX_8);
+ ehb();
+ itcblkgrn = read_c0_dtaglo();
+ itcblkgrn &= 0xfffe0000;
+ /* Set for 128 byte pitch of ITC cells */
+ itcblkgrn |= 0x00000c00;
+ /* Stage in Tag register */
+ write_c0_dtaglo(itcblkgrn);
+ ehb();
+ /* Write out to ITU with CACHE op */
+ cache_op(Index_Store_Tag_D, INDEX_8);
+ /* Now set base address, and turn ITC on with 0x1 bit */
+ write_c0_dtaglo((itc_base & 0xfffffc00) | 0x1 );
+ ehb();
+ /* Write out to ITU with CACHE op */
+ cache_op(Index_Store_Tag_D, INDEX_0);
+ write_c0_ecc(ectlval);
+ ehb();
+ printk("Mapped %ld ITC cells starting at 0x%08x\n",
+ ((itcblkgrn & 0x7fe00000) >> 20), itc_base);
+ }
+}
+
+/*
+ * Function to protect cache flushes from concurrent execution
+ * depends on MP software model chosen.
+ */
+
+void mt_cflush_lockdown(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ void smtc_cflush_lockdown(void);
+
+ smtc_cflush_lockdown();
+#endif /* CONFIG_MIPS_MT_SMTC */
+ /* FILL IN VSMP and AP/SP VERSIONS HERE */
+}
+
+void mt_cflush_release(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ void smtc_cflush_release(void);
+
+ smtc_cflush_release();
+#endif /* CONFIG_MIPS_MT_SMTC */
+ /* FILL IN VSMP and AP/SP VERSIONS HERE */
+}
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index c66db5e..8b393df 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -41,6 +41,10 @@
#include <asm/elf.h>
#include <asm/isadep.h>
#include <asm/inst.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+extern void smtc_idle_loop_hook(void);
+#endif /* CONFIG_MIPS_MT_SMTC */
/*
* The idle thread. There's no useful work to be done, so just try to conserve
@@ -51,9 +55,13 @@
{
/* endless idle loop with no priority at all */
while (1) {
- while (!need_resched())
+ while (!need_resched()) {
+#ifdef CONFIG_MIPS_MT_SMTC
+ smtc_idle_loop_hook();
+#endif /* CONFIG_MIPS_MT_SMTC */
if (cpu_wait)
(*cpu_wait)();
+ }
preempt_enable_no_resched();
schedule();
preempt_disable();
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index f838b36..f3106d0 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -248,10 +248,20 @@
break;
case FPC_EIR: { /* implementation / version register */
unsigned int flags;
+#ifdef CONFIG_MIPS_MT_SMTC
+ unsigned int irqflags;
+ unsigned int mtflags;
+#endif /* CONFIG_MIPS_MT_SMTC */
if (!cpu_has_fpu)
break;
+#ifdef CONFIG_MIPS_MT_SMTC
+ /* Read-modify-write of Status must be atomic */
+ local_irq_save(irqflags);
+ mtflags = dmt();
+#endif /* CONFIG_MIPS_MT_SMTC */
+
preempt_disable();
if (cpu_has_mipsmt) {
unsigned int vpflags = dvpe();
@@ -266,6 +276,10 @@
__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
write_c0_status(flags);
}
+#ifdef CONFIG_MIPS_MT_SMTC
+ emt(mtflags);
+ local_irq_restore(irqflags);
+#endif /* CONFIG_MIPS_MT_SMTC */
preempt_enable();
break;
}
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index 0d5cf97..8704dc0 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -173,12 +173,22 @@
break;
case FPC_EIR: { /* implementation / version register */
unsigned int flags;
+#ifdef CONFIG_MIPS_MT_SMTC
+ unsigned int irqflags;
+ unsigned int mtflags;
+#endif /* CONFIG_MIPS_MT_SMTC */
if (!cpu_has_fpu) {
tmp = 0;
break;
}
+#ifdef CONFIG_MIPS_MT_SMTC
+ /* Read-modify-write of Status must be atomic */
+ local_irq_save(irqflags);
+ mtflags = dmt();
+#endif /* CONFIG_MIPS_MT_SMTC */
+
preempt_disable();
if (cpu_has_mipsmt) {
unsigned int vpflags = dvpe();
@@ -193,6 +203,10 @@
__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
write_c0_status(flags);
}
+#ifdef CONFIG_MIPS_MT_SMTC
+ emt(mtflags);
+ local_irq_restore(irqflags);
+#endif /* CONFIG_MIPS_MT_SMTC */
preempt_enable();
break;
}
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S
index d2afbd1..0b1b54a 100644
--- a/arch/mips/kernel/r4k_switch.S
+++ b/arch/mips/kernel/r4k_switch.S
@@ -88,7 +88,18 @@
PTR_ADDIU t0, $28, _THREAD_SIZE - 32
set_saved_sp t0, t1, t2
-
+#ifdef CONFIG_MIPS_MT_SMTC
+ /* Read-modify-writes of Status must be atomic on a VPE */
+ mfc0 t2, CP0_TCSTATUS
+ ori t1, t2, TCSTATUS_IXMT
+ mtc0 t1, CP0_TCSTATUS
+ andi t2, t2, TCSTATUS_IXMT
+ ehb
+ DMT 8 # dmt t0
+ move t1,ra
+ jal mips_ihb
+ move ra,t1
+#endif /* CONFIG_MIPS_MT_SMTC */
mfc0 t1, CP0_STATUS /* Do we really need this? */
li a3, 0xff01
and t1, a3
@@ -97,6 +108,18 @@
and a2, a3
or a2, t1
mtc0 a2, CP0_STATUS
+#ifdef CONFIG_MIPS_MT_SMTC
+ ehb
+ andi t0, t0, VPECONTROL_TE
+ beqz t0, 1f
+ emt
+1:
+ mfc0 t1, CP0_TCSTATUS
+ xori t1, t1, TCSTATUS_IXMT
+ or t1, t1, t2
+ mtc0 t1, CP0_TCSTATUS
+ ehb
+#endif /* CONFIG_MIPS_MT_SMTC */
move v0, a0
jr ra
END(resume)
@@ -131,10 +154,19 @@
#define FPU_DEFAULT 0x00000000
LEAF(_init_fpu)
+#ifdef CONFIG_MIPS_MT_SMTC
+ /* Rather than manipulate per-VPE Status, set per-TC bit in TCStatus */
+ mfc0 t0, CP0_TCSTATUS
+ /* Bit position is the same for Status, TCStatus */
+ li t1, ST0_CU1
+ or t0, t1
+ mtc0 t0, CP0_TCSTATUS
+#else /* Normal MIPS CU1 enable */
mfc0 t0, CP0_STATUS
li t1, ST0_CU1
or t0, t1
mtc0 t0, CP0_STATUS
+#endif /* CONFIG_MIPS_MT_SMTC */
fpu_enable_hazard
li t1, FPU_DEFAULT
diff --git a/arch/mips/kernel/smp_mt.c b/arch/mips/kernel/smp-mt.c
similarity index 92%
rename from arch/mips/kernel/smp_mt.c
rename to arch/mips/kernel/smp-mt.c
index 993b8bf..19b8e4b 100644
--- a/arch/mips/kernel/smp_mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -1,8 +1,4 @@
/*
- * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
- *
- * Elizabeth Clarke (beth@mips.com)
- *
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
@@ -16,6 +12,10 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
+ * Copyright (C) 2004, 05, 06 MIPS Technologies, Inc.
+ * Elizabeth Clarke (beth@mips.com)
+ * Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
*/
#include <linux/kernel.h>
#include <linux/sched.h>
@@ -24,6 +24,7 @@
#include <linux/compiler.h>
#include <asm/atomic.h>
+#include <asm/cacheflush.h>
#include <asm/cpu.h>
#include <asm/processor.h>
#include <asm/system.h>
@@ -33,8 +34,8 @@
#include <asm/time.h>
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
-#include <asm/cacheflush.h>
-#include <asm/mips-boards/maltaint.h>
+#include <asm/mips_mt.h>
+#include <asm/mips-boards/maltaint.h> /* This is f*cking wrong */
#define MIPS_CPU_IPI_RESCHED_IRQ 0
#define MIPS_CPU_IPI_CALL_IRQ 1
@@ -66,6 +67,7 @@
if (!cpu_has_mipsmt)
return;
+ /* Enable VPC */
set_c0_mvpcontrol(MVPCONTROL_VPC);
back_to_back_c0_hazard();
@@ -106,12 +108,12 @@
static void ipi_resched_dispatch (struct pt_regs *regs)
{
- do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ, regs);
+ do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ, regs);
}
static void ipi_call_dispatch (struct pt_regs *regs)
{
- do_IRQ(MIPS_CPU_IPI_CALL_IRQ, regs);
+ do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ, regs);
}
irqreturn_t ipi_resched_interrupt(int irq, void *dev_id, struct pt_regs *regs)
@@ -155,6 +157,8 @@
dvpe();
dmt();
+ mips_mt_set_cpuoptions();
+
/* Put MVPE's into 'configuration state' */
set_c0_mvpcontrol(MVPCONTROL_VPC);
@@ -189,11 +193,13 @@
if (i != 0) {
write_vpe_c0_status((read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0);
- write_vpe_c0_cause(read_vpe_c0_cause() & ~CAUSEF_IP);
/* set config to be the same as vpe0, particularly kseg0 coherency alg */
write_vpe_c0_config( read_c0_config());
+ /* make sure there are no software interrupts pending */
+ write_vpe_c0_cause(read_vpe_c0_cause() & ~(C_SW1|C_SW0));
+
/* Propagate Config7 */
write_vpe_c0_config7(read_c0_config7());
}
@@ -233,16 +239,16 @@
/* We'll wait until starting the secondaries before starting MVPE */
printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+}
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
/* set up ipi interrupts */
if (cpu_has_vint) {
set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
}
-}
-void __init plat_prepare_cpus(unsigned int max_cpus)
-{
cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ;
@@ -287,7 +293,8 @@
/* global pointer */
write_tc_gpr_gp((unsigned long)gp);
- flush_icache_range((unsigned long)gp, (unsigned long)(gp + 1));
+ flush_icache_range((unsigned long)gp,
+ (unsigned long)(gp + sizeof(struct thread_info)));
/* finally out of configuration and into chaos */
clear_c0_mvpcontrol(MVPCONTROL_VPC);
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 72a287a..d42f358 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -38,6 +38,10 @@
#include <asm/mmu_context.h>
#include <asm/smp.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif /* CONFIG_MIPS_MT_SMTC */
+
cpumask_t phys_cpu_present_map; /* Bitmask of available CPUs */
volatile cpumask_t cpu_callin_map; /* Bitmask of started secondaries */
cpumask_t cpu_online_map; /* Bitmask of currently online CPUs */
@@ -85,6 +89,10 @@
{
unsigned int cpu;
+#ifdef CONFIG_MIPS_MT_SMTC
+ /* Only do cpu_probe for first TC of CPU */
+ if ((read_c0_tcbind() & TCBIND_CURTC) == 0)
+#endif /* CONFIG_MIPS_MT_SMTC */
cpu_probe();
cpu_report();
per_cpu_trap_init();
@@ -179,11 +187,13 @@
if (wait)
while (atomic_read(&data.finished) != cpus)
barrier();
+ call_data = NULL;
spin_unlock(&smp_call_lock);
return 0;
}
+
void smp_call_function_interrupt(void)
{
void (*func) (void *info) = call_data->func;
diff --git a/arch/mips/kernel/smtc-asm.S b/arch/mips/kernel/smtc-asm.S
new file mode 100644
index 0000000..c9d6519
--- /dev/null
+++ b/arch/mips/kernel/smtc-asm.S
@@ -0,0 +1,130 @@
+/*
+ * Assembly Language Functions for MIPS MT SMTC support
+ */
+
+/*
+ * This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set. */
+
+#include <asm/regdef.h>
+#include <asm/asmmacro.h>
+#include <asm/stackframe.h>
+#include <asm/stackframe.h>
+
+/*
+ * "Software Interrupt" linkage.
+ *
+ * This is invoked when an "Interrupt" is sent from one TC to another,
+ * where the TC to be interrupted is halted, has it's Restart address
+ * and Status values saved by the "remote control" thread, then modified
+ * to cause execution to begin here, in kenel mode. This code then
+ * disguises the TC state as that of an exception and transfers
+ * control to the general exception or vectored interrupt handler.
+ */
+ .set noreorder
+
+/*
+The __smtc_ipi_vector would use k0 and k1 as temporaries and
+1) Set EXL (this is per-VPE, so this can't be done by proxy!)
+2) Restore the K/CU and IXMT bits to the pre "exception" state
+ (EXL means no interrupts and access to the kernel map).
+3) Set EPC to be the saved value of TCRestart.
+4) Jump to the exception handler entry point passed by the sender.
+
+CAN WE PROVE THAT WE WON'T DO THIS IF INTS DISABLED??
+*/
+
+/*
+ * Reviled and slandered vision: Set EXL and restore K/CU/IXMT
+ * state of pre-halt thread, then save everything and call
+ * thought some function pointer to imaginary_exception, which
+ * will parse a register value or memory message queue to
+ * deliver things like interprocessor interrupts. On return
+ * from that function, jump to the global ret_from_irq code
+ * to invoke the scheduler and return as appropriate.
+ */
+
+#define PT_PADSLOT4 (PT_R0-8)
+#define PT_PADSLOT5 (PT_R0-4)
+
+ .text
+ .align 5
+FEXPORT(__smtc_ipi_vector)
+ .set noat
+ /* Disable thread scheduling to make Status update atomic */
+ DMT 27 # dmt k1
+ ehb
+ /* Set EXL */
+ mfc0 k0,CP0_STATUS
+ ori k0,k0,ST0_EXL
+ mtc0 k0,CP0_STATUS
+ ehb
+ /* Thread scheduling now inhibited by EXL. Restore TE state. */
+ andi k1,k1,VPECONTROL_TE
+ beqz k1,1f
+ emt
+1:
+ /*
+ * The IPI sender has put some information on the anticipated
+ * kernel stack frame. If we were in user mode, this will be
+ * built above the saved kernel SP. If we were already in the
+ * kernel, it will be built above the current CPU SP.
+ *
+ * Were we in kernel mode, as indicated by CU0?
+ */
+ sll k1,k0,3
+ .set noreorder
+ bltz k1,2f
+ move k1,sp
+ .set reorder
+ /*
+ * If previously in user mode, set CU0 and use kernel stack.
+ */
+ li k1,ST0_CU0
+ or k1,k1,k0
+ mtc0 k1,CP0_STATUS
+ ehb
+ get_saved_sp
+ /* Interrupting TC will have pre-set values in slots in the new frame */
+2: subu k1,k1,PT_SIZE
+ /* Load TCStatus Value */
+ lw k0,PT_TCSTATUS(k1)
+ /* Write it to TCStatus to restore CU/KSU/IXMT state */
+ mtc0 k0,$2,1
+ ehb
+ lw k0,PT_EPC(k1)
+ mtc0 k0,CP0_EPC
+ /* Save all will redundantly recompute the SP, but use it for now */
+ SAVE_ALL
+ CLI
+ move a0,sp
+ /* Function to be invoked passed stack pad slot 5 */
+ lw t0,PT_PADSLOT5(sp)
+ /* Argument from sender passed in stack pad slot 4 */
+ lw a1,PT_PADSLOT4(sp)
+ jalr t0
+ nop
+ j ret_from_irq
+ nop
+
+/*
+ * Called from idle loop to provoke processing of queued IPIs
+ * First IPI message in queue passed as argument.
+ */
+
+LEAF(self_ipi)
+ /* Before anything else, block interrupts */
+ mfc0 t0,CP0_TCSTATUS
+ ori t1,t0,TCSTATUS_IXMT
+ mtc0 t1,CP0_TCSTATUS
+ ehb
+ /* We know we're in kernel mode, so prepare stack frame */
+ subu t1,sp,PT_SIZE
+ sw ra,PT_EPC(t1)
+ sw a0,PT_PADSLOT4(t1)
+ la t2,ipi_decode
+ sw t2,PT_PADSLOT5(t1)
+ /* Save pre-disable value of TCStatus */
+ sw t0,PT_TCSTATUS(t1)
+ j __smtc_ipi_vector
+ nop
+END(self_ipi)
diff --git a/arch/mips/kernel/smtc-proc.c b/arch/mips/kernel/smtc-proc.c
new file mode 100644
index 0000000..6f37099
--- /dev/null
+++ b/arch/mips/kernel/smtc-proc.c
@@ -0,0 +1,93 @@
+/*
+ * /proc hooks for SMTC kernel
+ * Copyright (C) 2005 Mips Technologies, Inc
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#include <asm/mipsregs.h>
+#include <asm/cacheflush.h>
+#include <linux/proc_fs.h>
+
+#include <asm/smtc_proc.h>
+
+/*
+ * /proc diagnostic and statistics hooks
+ */
+
+/*
+ * Statistics gathered
+ */
+unsigned long selfipis[NR_CPUS];
+
+struct smtc_cpu_proc smtc_cpu_stats[NR_CPUS];
+
+static struct proc_dir_entry *smtc_stats;
+
+atomic_t smtc_fpu_recoveries;
+
+static int proc_read_smtc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ int totalen = 0;
+ int len;
+ int i;
+ extern unsigned long ebase;
+
+ len = sprintf(page, "SMTC Status Word: 0x%08x\n", smtc_status);
+ totalen += len;
+ page += len;
+ len = sprintf(page, "Config7: 0x%08x\n", read_c0_config7());
+ totalen += len;
+ page += len;
+ len = sprintf(page, "EBASE: 0x%08lx\n", ebase);
+ totalen += len;
+ page += len;
+ len = sprintf(page, "Counter Interrupts taken per CPU (TC)\n");
+ totalen += len;
+ page += len;
+ for (i=0; i < NR_CPUS; i++) {
+ len = sprintf(page, "%d: %ld\n", i, smtc_cpu_stats[i].timerints);
+ totalen += len;
+ page += len;
+ }
+ len = sprintf(page, "Self-IPIs by CPU:\n");
+ totalen += len;
+ page += len;
+ for(i = 0; i < NR_CPUS; i++) {
+ len = sprintf(page, "%d: %ld\n", i, smtc_cpu_stats[i].selfipis);
+ totalen += len;
+ page += len;
+ }
+ len = sprintf(page, "%d Recoveries of \"stolen\" FPU\n",
+ atomic_read(&smtc_fpu_recoveries));
+ totalen += len;
+ page += len;
+
+ return totalen;
+}
+
+void init_smtc_stats(void)
+{
+ int i;
+
+ for (i=0; i<NR_CPUS; i++) {
+ smtc_cpu_stats[i].timerints = 0;
+ smtc_cpu_stats[i].selfipis = 0;
+ }
+
+ atomic_set(&smtc_fpu_recoveries, 0);
+
+ smtc_stats = create_proc_read_entry("smtc", 0444, NULL,
+ proc_read_smtc, NULL);
+}
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
new file mode 100644
index 0000000..2e8e52c
--- /dev/null
+++ b/arch/mips/kernel/smtc.c
@@ -0,0 +1,1322 @@
+/* Copyright (C) 2004 Mips Technologies, Inc */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/hazards.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#include <asm/mipsregs.h>
+#include <asm/cacheflush.h>
+#include <asm/time.h>
+#include <asm/addrspace.h>
+#include <asm/smtc.h>
+#include <asm/smtc_ipi.h>
+#include <asm/smtc_proc.h>
+
+/*
+ * This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set.
+ */
+
+/*
+ * MIPSCPU_INT_BASE is identically defined in both
+ * asm-mips/mips-boards/maltaint.h and asm-mips/mips-boards/simint.h,
+ * but as yet there's no properly organized include structure that
+ * will ensure that the right *int.h file will be included for a
+ * given platform build.
+ */
+
+#define MIPSCPU_INT_BASE 16
+
+#define MIPS_CPU_IPI_IRQ 1
+
+#define LOCK_MT_PRA() \
+ local_irq_save(flags); \
+ mtflags = dmt()
+
+#define UNLOCK_MT_PRA() \
+ emt(mtflags); \
+ local_irq_restore(flags)
+
+#define LOCK_CORE_PRA() \
+ local_irq_save(flags); \
+ mtflags = dvpe()
+
+#define UNLOCK_CORE_PRA() \
+ evpe(mtflags); \
+ local_irq_restore(flags)
+
+/*
+ * Data structures purely associated with SMTC parallelism
+ */
+
+
+/*
+ * Table for tracking ASIDs whose lifetime is prolonged.
+ */
+
+asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
+
+/*
+ * Clock interrupt "latch" buffers, per "CPU"
+ */
+
+unsigned int ipi_timer_latch[NR_CPUS];
+
+/*
+ * Number of InterProcessor Interupt (IPI) message buffers to allocate
+ */
+
+#define IPIBUF_PER_CPU 4
+
+struct smtc_ipi_q IPIQ[NR_CPUS];
+struct smtc_ipi_q freeIPIq;
+
+
+/* Forward declarations */
+
+void ipi_decode(struct pt_regs *, struct smtc_ipi *);
+void post_direct_ipi(int cpu, struct smtc_ipi *pipi);
+void setup_cross_vpe_interrupts(void);
+void init_smtc_stats(void);
+
+/* Global SMTC Status */
+
+unsigned int smtc_status = 0;
+
+/* Boot command line configuration overrides */
+
+static int vpelimit = 0;
+static int tclimit = 0;
+static int ipibuffers = 0;
+static int nostlb = 0;
+static int asidmask = 0;
+unsigned long smtc_asid_mask = 0xff;
+
+static int __init maxvpes(char *str)
+{
+ get_option(&str, &vpelimit);
+ return 1;
+}
+
+static int __init maxtcs(char *str)
+{
+ get_option(&str, &tclimit);
+ return 1;
+}
+
+static int __init ipibufs(char *str)
+{
+ get_option(&str, &ipibuffers);
+ return 1;
+}
+
+static int __init stlb_disable(char *s)
+{
+ nostlb = 1;
+ return 1;
+}
+
+static int __init asidmask_set(char *str)
+{
+ get_option(&str, &asidmask);
+ switch(asidmask) {
+ case 0x1:
+ case 0x3:
+ case 0x7:
+ case 0xf:
+ case 0x1f:
+ case 0x3f:
+ case 0x7f:
+ case 0xff:
+ smtc_asid_mask = (unsigned long)asidmask;
+ break;
+ default:
+ printk("ILLEGAL ASID mask 0x%x from command line\n", asidmask);
+ }
+ return 1;
+}
+
+__setup("maxvpes=", maxvpes);
+__setup("maxtcs=", maxtcs);
+__setup("ipibufs=", ipibufs);
+__setup("nostlb", stlb_disable);
+__setup("asidmask=", asidmask_set);
+
+/* Enable additional debug checks before going into CPU idle loop */
+#define SMTC_IDLE_HOOK_DEBUG
+
+#ifdef SMTC_IDLE_HOOK_DEBUG
+
+static int hang_trig = 0;
+
+static int __init hangtrig_enable(char *s)
+{
+ hang_trig = 1;
+ return 1;
+}
+
+
+__setup("hangtrig", hangtrig_enable);
+
+#define DEFAULT_BLOCKED_IPI_LIMIT 32
+
+static int timerq_limit = DEFAULT_BLOCKED_IPI_LIMIT;
+
+static int __init tintq(char *str)
+{
+ get_option(&str, &timerq_limit);
+ return 1;
+}
+
+__setup("tintq=", tintq);
+
+int imstuckcount[2][8];
+/* vpemask represents IM/IE bits of per-VPE Status registers, low-to-high */
+int vpemask[2][8] = {{0,1,1,0,0,0,0,1},{0,1,0,0,0,0,0,1}};
+int tcnoprog[NR_CPUS];
+static atomic_t idle_hook_initialized = {0};
+static int clock_hang_reported[NR_CPUS];
+
+#endif /* SMTC_IDLE_HOOK_DEBUG */
+
+/* Initialize shared TLB - the should probably migrate to smtc_setup_cpus() */
+
+void __init sanitize_tlb_entries(void)
+{
+ printk("Deprecated sanitize_tlb_entries() invoked\n");
+}
+
+
+/*
+ * Configure shared TLB - VPC configuration bit must be set by caller
+ */
+
+void smtc_configure_tlb(void)
+{
+ int i,tlbsiz,vpes;
+ unsigned long mvpconf0;
+ unsigned long config1val;
+
+ /* Set up ASID preservation table */
+ for (vpes=0; vpes<MAX_SMTC_TLBS; vpes++) {
+ for(i = 0; i < MAX_SMTC_ASIDS; i++) {
+ smtc_live_asid[vpes][i] = 0;
+ }
+ }
+ mvpconf0 = read_c0_mvpconf0();
+
+ if ((vpes = ((mvpconf0 & MVPCONF0_PVPE)
+ >> MVPCONF0_PVPE_SHIFT) + 1) > 1) {
+ /* If we have multiple VPEs, try to share the TLB */
+ if ((mvpconf0 & MVPCONF0_TLBS) && !nostlb) {
+ /*
+ * If TLB sizing is programmable, shared TLB
+ * size is the total available complement.
+ * Otherwise, we have to take the sum of all
+ * static VPE TLB entries.
+ */
+ if ((tlbsiz = ((mvpconf0 & MVPCONF0_PTLBE)
+ >> MVPCONF0_PTLBE_SHIFT)) == 0) {
+ /*
+ * If there's more than one VPE, there had better
+ * be more than one TC, because we need one to bind
+ * to each VPE in turn to be able to read
+ * its configuration state!
+ */
+ settc(1);
+ /* Stop the TC from doing anything foolish */
+ write_tc_c0_tchalt(TCHALT_H);
+ mips_ihb();
+ /* No need to un-Halt - that happens later anyway */
+ for (i=0; i < vpes; i++) {
+ write_tc_c0_tcbind(i);
+ /*
+ * To be 100% sure we're really getting the right
+ * information, we exit the configuration state
+ * and do an IHB after each rebinding.
+ */
+ write_c0_mvpcontrol(
+ read_c0_mvpcontrol() & ~ MVPCONTROL_VPC );
+ mips_ihb();
+ /*
+ * Only count if the MMU Type indicated is TLB
+ */
+ if(((read_vpe_c0_config() & MIPS_CONF_MT) >> 7) == 1) {
+ config1val = read_vpe_c0_config1();
+ tlbsiz += ((config1val >> 25) & 0x3f) + 1;
+ }
+
+ /* Put core back in configuration state */
+ write_c0_mvpcontrol(
+ read_c0_mvpcontrol() | MVPCONTROL_VPC );
+ mips_ihb();
+ }
+ }
+ write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_STLB);
+
+ /*
+ * Setup kernel data structures to use software total,
+ * rather than read the per-VPE Config1 value. The values
+ * for "CPU 0" gets copied to all the other CPUs as part
+ * of their initialization in smtc_cpu_setup().
+ */
+
+ tlbsiz = tlbsiz & 0x3f; /* MIPS32 limits TLB indices to 64 */
+ cpu_data[0].tlbsize = tlbsiz;
+ smtc_status |= SMTC_TLB_SHARED;
+
+ printk("TLB of %d entry pairs shared by %d VPEs\n",
+ tlbsiz, vpes);
+ } else {
+ printk("WARNING: TLB Not Sharable on SMTC Boot!\n");
+ }
+ }
+}
+
+
+/*
+ * Incrementally build the CPU map out of constituent MIPS MT cores,
+ * using the specified available VPEs and TCs. Plaform code needs
+ * to ensure that each MIPS MT core invokes this routine on reset,
+ * one at a time(!).
+ *
+ * This version of the build_cpu_map and prepare_cpus routines assumes
+ * that *all* TCs of a MIPS MT core will be used for Linux, and that
+ * they will be spread across *all* available VPEs (to minimise the
+ * loss of efficiency due to exception service serialization).
+ * An improved version would pick up configuration information and
+ * possibly leave some TCs/VPEs as "slave" processors.
+ *
+ * Use c0_MVPConf0 to find out how many TCs are available, setting up
+ * phys_cpu_present_map and the logical/physical mappings.
+ */
+
+int __init mipsmt_build_cpu_map(int start_cpu_slot)
+{
+ int i, ntcs;
+
+ /*
+ * The CPU map isn't actually used for anything at this point,
+ * so it's not clear what else we should do apart from set
+ * everything up so that "logical" = "physical".
+ */
+ ntcs = ((read_c0_mvpconf0() & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
+ for (i=start_cpu_slot; i<NR_CPUS && i<ntcs; i++) {
+ cpu_set(i, phys_cpu_present_map);
+ __cpu_number_map[i] = i;
+ __cpu_logical_map[i] = i;
+ }
+ /* Initialize map of CPUs with FPUs */
+ cpus_clear(mt_fpu_cpumask);
+
+ /* One of those TC's is the one booting, and not a secondary... */
+ printk("%i available secondary CPU TC(s)\n", i - 1);
+
+ return i;
+}
+
+/*
+ * Common setup before any secondaries are started
+ * Make sure all CPU's are in a sensible state before we boot any of the
+ * secondaries.
+ *
+ * For MIPS MT "SMTC" operation, we set up all TCs, spread as evenly
+ * as possible across the available VPEs.
+ */
+
+static void smtc_tc_setup(int vpe, int tc, int cpu)
+{
+ settc(tc);
+ write_tc_c0_tchalt(TCHALT_H);
+ mips_ihb();
+ write_tc_c0_tcstatus((read_tc_c0_tcstatus()
+ & ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT))
+ | TCSTATUS_A);
+ write_tc_c0_tccontext(0);
+ /* Bind tc to vpe */
+ write_tc_c0_tcbind(vpe);
+ /* In general, all TCs should have the same cpu_data indications */
+ memcpy(&cpu_data[cpu], &cpu_data[0], sizeof(struct cpuinfo_mips));
+ /* For 34Kf, start with TC/CPU 0 as sole owner of single FPU context */
+ if (cpu_data[0].cputype == CPU_34K)
+ cpu_data[cpu].options &= ~MIPS_CPU_FPU;
+ cpu_data[cpu].vpe_id = vpe;
+ cpu_data[cpu].tc_id = tc;
+}
+
+
+void mipsmt_prepare_cpus(void)
+{
+ int i, vpe, tc, ntc, nvpe, tcpervpe, slop, cpu;
+ unsigned long flags;
+ unsigned long val;
+ int nipi;
+ struct smtc_ipi *pipi;
+
+ /* disable interrupts so we can disable MT */
+ local_irq_save(flags);
+ /* disable MT so we can configure */
+ dvpe();
+ dmt();
+
+ freeIPIq.lock = SPIN_LOCK_UNLOCKED;
+
+ /*
+ * We probably don't have as many VPEs as we do SMP "CPUs",
+ * but it's possible - and in any case we'll never use more!
+ */
+ for (i=0; i<NR_CPUS; i++) {
+ IPIQ[i].head = IPIQ[i].tail = NULL;
+ IPIQ[i].lock = SPIN_LOCK_UNLOCKED;
+ IPIQ[i].depth = 0;
+ ipi_timer_latch[i] = 0;
+ }
+
+ /* cpu_data index starts at zero */
+ cpu = 0;
+ cpu_data[cpu].vpe_id = 0;
+ cpu_data[cpu].tc_id = 0;
+ cpu++;
+
+ /* Report on boot-time options */
+ mips_mt_set_cpuoptions ();
+ if (vpelimit > 0)
+ printk("Limit of %d VPEs set\n", vpelimit);
+ if (tclimit > 0)
+ printk("Limit of %d TCs set\n", tclimit);
+ if (nostlb) {
+ printk("Shared TLB Use Inhibited - UNSAFE for Multi-VPE Operation\n");
+ }
+ if (asidmask)
+ printk("ASID mask value override to 0x%x\n", asidmask);
+
+ /* Temporary */
+#ifdef SMTC_IDLE_HOOK_DEBUG
+ if (hang_trig)
+ printk("Logic Analyser Trigger on suspected TC hang\n");
+#endif /* SMTC_IDLE_HOOK_DEBUG */
+
+ /* Put MVPE's into 'configuration state' */
+ write_c0_mvpcontrol( read_c0_mvpcontrol() | MVPCONTROL_VPC );
+
+ val = read_c0_mvpconf0();
+ nvpe = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+ if (vpelimit > 0 && nvpe > vpelimit)
+ nvpe = vpelimit;
+ ntc = ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
+ if (ntc > NR_CPUS)
+ ntc = NR_CPUS;
+ if (tclimit > 0 && ntc > tclimit)
+ ntc = tclimit;
+ tcpervpe = ntc / nvpe;
+ slop = ntc % nvpe; /* Residual TCs, < NVPE */
+
+ /* Set up shared TLB */
+ smtc_configure_tlb();
+
+ for (tc = 0, vpe = 0 ; (vpe < nvpe) && (tc < ntc) ; vpe++) {
+ /*
+ * Set the MVP bits.
+ */
+ settc(tc);
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_MVP);
+ if (vpe != 0)
+ printk(", ");
+ printk("VPE %d: TC", vpe);
+ for (i = 0; i < tcpervpe; i++) {
+ /*
+ * TC 0 is bound to VPE 0 at reset,
+ * and is presumably executing this
+ * code. Leave it alone!
+ */
+ if (tc != 0) {
+ smtc_tc_setup(vpe,tc, cpu);
+ cpu++;
+ }
+ printk(" %d", tc);
+ tc++;
+ }
+ if (slop) {
+ if (tc != 0) {
+ smtc_tc_setup(vpe,tc, cpu);
+ cpu++;
+ }
+ printk(" %d", tc);
+ tc++;
+ slop--;
+ }
+ if (vpe != 0) {
+ /*
+ * Clear any stale software interrupts from VPE's Cause
+ */
+ write_vpe_c0_cause(0);
+
+ /*
+ * Clear ERL/EXL of VPEs other than 0
+ * and set restricted interrupt enable/mask.
+ */
+ write_vpe_c0_status((read_vpe_c0_status()
+ & ~(ST0_BEV | ST0_ERL | ST0_EXL | ST0_IM))
+ | (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP7
+ | ST0_IE));
+ /*
+ * set config to be the same as vpe0,
+ * particularly kseg0 coherency alg
+ */
+ write_vpe_c0_config(read_c0_config());
+ /* Clear any pending timer interrupt */
+ write_vpe_c0_compare(0);
+ /* Propagate Config7 */
+ write_vpe_c0_config7(read_c0_config7());
+ }
+ /* enable multi-threading within VPE */
+ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE);
+ /* enable the VPE */
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
+ }
+
+ /*
+ * Pull any physically present but unused TCs out of circulation.
+ */
+ while (tc < (((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1)) {
+ cpu_clear(tc, phys_cpu_present_map);
+ cpu_clear(tc, cpu_present_map);
+ tc++;
+ }
+
+ /* release config state */
+ write_c0_mvpcontrol( read_c0_mvpcontrol() & ~ MVPCONTROL_VPC );
+
+ printk("\n");
+
+ /* Set up coprocessor affinity CPU mask(s) */
+
+ for (tc = 0; tc < ntc; tc++) {
+ if(cpu_data[tc].options & MIPS_CPU_FPU)
+ cpu_set(tc, mt_fpu_cpumask);
+ }
+
+ /* set up ipi interrupts... */
+
+ /* If we have multiple VPEs running, set up the cross-VPE interrupt */
+
+ if (nvpe > 1)
+ setup_cross_vpe_interrupts();
+
+ /* Set up queue of free IPI "messages". */
+ nipi = NR_CPUS * IPIBUF_PER_CPU;
+ if (ipibuffers > 0)
+ nipi = ipibuffers;
+
+ pipi = kmalloc(nipi *sizeof(struct smtc_ipi), GFP_KERNEL);
+ if (pipi == NULL)
+ panic("kmalloc of IPI message buffers failed\n");
+ else
+ printk("IPI buffer pool of %d buffers\n", nipi);
+ for (i = 0; i < nipi; i++) {
+ smtc_ipi_nq(&freeIPIq, pipi);
+ pipi++;
+ }
+
+ /* Arm multithreading and enable other VPEs - but all TCs are Halted */
+ emt(EMT_ENABLE);
+ evpe(EVPE_ENABLE);
+ local_irq_restore(flags);
+ /* Initialize SMTC /proc statistics/diagnostics */
+ init_smtc_stats();
+}
+
+
+/*
+ * Setup the PC, SP, and GP of a secondary processor and start it
+ * running!
+ * smp_bootstrap is the place to resume from
+ * __KSTK_TOS(idle) is apparently the stack pointer
+ * (unsigned long)idle->thread_info the gp
+ *
+ */
+void smtc_boot_secondary(int cpu, struct task_struct *idle)
+{
+ extern u32 kernelsp[NR_CPUS];
+ long flags;
+ int mtflags;
+
+ LOCK_MT_PRA();
+ if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
+ dvpe();
+ }
+ settc(cpu_data[cpu].tc_id);
+
+ /* pc */
+ write_tc_c0_tcrestart((unsigned long)&smp_bootstrap);
+
+ /* stack pointer */
+ kernelsp[cpu] = __KSTK_TOS(idle);
+ write_tc_gpr_sp(__KSTK_TOS(idle));
+
+ /* global pointer */
+ write_tc_gpr_gp((unsigned long)idle->thread_info);
+
+ smtc_status |= SMTC_MTC_ACTIVE;
+ write_tc_c0_tchalt(0);
+ if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
+ evpe(EVPE_ENABLE);
+ }
+ UNLOCK_MT_PRA();
+}
+
+void smtc_init_secondary(void)
+{
+ /*
+ * Start timer on secondary VPEs if necessary.
+ * mips_timer_setup should already have been invoked by init/main
+ * on "boot" TC. Like per_cpu_trap_init() hack, this assumes that
+ * SMTC init code assigns TCs consdecutively and in ascending order
+ * to across available VPEs.
+ */
+ if(((read_c0_tcbind() & TCBIND_CURTC) != 0)
+ && ((read_c0_tcbind() & TCBIND_CURVPE)
+ != cpu_data[smp_processor_id() - 1].vpe_id)){
+ write_c0_compare (read_c0_count() + mips_hpt_frequency/HZ);
+ }
+
+ local_irq_enable();
+}
+
+void smtc_smp_finish(void)
+{
+ printk("TC %d going on-line as CPU %d\n",
+ cpu_data[smp_processor_id()].tc_id, smp_processor_id());
+}
+
+void smtc_cpus_done(void)
+{
+}
+
+/*
+ * Support for SMTC-optimized driver IRQ registration
+ */
+
+/*
+ * SMTC Kernel needs to manipulate low-level CPU interrupt mask
+ * in do_IRQ. These are passed in setup_irq_smtc() and stored
+ * in this table.
+ */
+
+int setup_irq_smtc(unsigned int irq, struct irqaction * new,
+ unsigned long hwmask)
+{
+ irq_hwmask[irq] = hwmask;
+
+ return setup_irq(irq, new);
+}
+
+/*
+ * IPI model for SMTC is tricky, because interrupts aren't TC-specific.
+ * Within a VPE one TC can interrupt another by different approaches.
+ * The easiest to get right would probably be to make all TCs except
+ * the target IXMT and set a software interrupt, but an IXMT-based
+ * scheme requires that a handler must run before a new IPI could
+ * be sent, which would break the "broadcast" loops in MIPS MT.
+ * A more gonzo approach within a VPE is to halt the TC, extract
+ * its Restart, Status, and a couple of GPRs, and program the Restart
+ * address to emulate an interrupt.
+ *
+ * Within a VPE, one can be confident that the target TC isn't in
+ * a critical EXL state when halted, since the write to the Halt
+ * register could not have issued on the writing thread if the
+ * halting thread had EXL set. So k0 and k1 of the target TC
+ * can be used by the injection code. Across VPEs, one can't
+ * be certain that the target TC isn't in a critical exception
+ * state. So we try a two-step process of sending a software
+ * interrupt to the target VPE, which either handles the event
+ * itself (if it was the target) or injects the event within
+ * the VPE.
+ */
+
+void smtc_ipi_qdump(void)
+{
+ int i;
+
+ for (i = 0; i < NR_CPUS ;i++) {
+ printk("IPIQ[%d]: head = 0x%x, tail = 0x%x, depth = %d\n",
+ i, (unsigned)IPIQ[i].head, (unsigned)IPIQ[i].tail,
+ IPIQ[i].depth);
+ }
+}
+
+/*
+ * The standard atomic.h primitives don't quite do what we want
+ * here: We need an atomic add-and-return-previous-value (which
+ * could be done with atomic_add_return and a decrement) and an
+ * atomic set/zero-and-return-previous-value (which can't really
+ * be done with the atomic.h primitives). And since this is
+ * MIPS MT, we can assume that we have LL/SC.
+ */
+static __inline__ int atomic_postincrement(unsigned int *pv)
+{
+ unsigned long result;
+
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ "1: ll %0, %2 \n"
+ " addu %1, %0, 1 \n"
+ " sc %1, %2 \n"
+ " beqz %1, 1b \n"
+ " sync \n"
+ : "=&r" (result), "=&r" (temp), "=m" (*pv)
+ : "m" (*pv)
+ : "memory");
+
+ return result;
+}
+
+/* No longer used in IPI dispatch, but retained for future recycling */
+
+static __inline__ int atomic_postclear(unsigned int *pv)
+{
+ unsigned long result;
+
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ "1: ll %0, %2 \n"
+ " or %1, $0, $0 \n"
+ " sc %1, %2 \n"
+ " beqz %1, 1b \n"
+ " sync \n"
+ : "=&r" (result), "=&r" (temp), "=m" (*pv)
+ : "m" (*pv)
+ : "memory");
+
+ return result;
+}
+
+
+void smtc_send_ipi(int cpu, int type, unsigned int action)
+{
+ int tcstatus;
+ struct smtc_ipi *pipi;
+ long flags;
+ int mtflags;
+
+ if (cpu == smp_processor_id()) {
+ printk("Cannot Send IPI to self!\n");
+ return;
+ }
+ /* Set up a descriptor, to be delivered either promptly or queued */
+ pipi = smtc_ipi_dq(&freeIPIq);
+ if (pipi == NULL) {
+ bust_spinlocks(1);
+ mips_mt_regdump(dvpe());
+ panic("IPI Msg. Buffers Depleted\n");
+ }
+ pipi->type = type;
+ pipi->arg = (void *)action;
+ pipi->dest = cpu;
+ if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
+ /* If not on same VPE, enqueue and send cross-VPE interupt */
+ smtc_ipi_nq(&IPIQ[cpu], pipi);
+ LOCK_CORE_PRA();
+ settc(cpu_data[cpu].tc_id);
+ write_vpe_c0_cause(read_vpe_c0_cause() | C_SW1);
+ UNLOCK_CORE_PRA();
+ } else {
+ /*
+ * Not sufficient to do a LOCK_MT_PRA (dmt) here,
+ * since ASID shootdown on the other VPE may
+ * collide with this operation.
+ */
+ LOCK_CORE_PRA();
+ settc(cpu_data[cpu].tc_id);
+ /* Halt the targeted TC */
+ write_tc_c0_tchalt(TCHALT_H);
+ mips_ihb();
+
+ /*
+ * Inspect TCStatus - if IXMT is set, we have to queue
+ * a message. Otherwise, we set up the "interrupt"
+ * of the other TC
+ */
+ tcstatus = read_tc_c0_tcstatus();
+
+ if ((tcstatus & TCSTATUS_IXMT) != 0) {
+ /*
+ * Spin-waiting here can deadlock,
+ * so we queue the message for the target TC.
+ */
+ write_tc_c0_tchalt(0);
+ UNLOCK_CORE_PRA();
+ /* Try to reduce redundant timer interrupt messages */
+ if(type == SMTC_CLOCK_TICK) {
+ if(atomic_postincrement(&ipi_timer_latch[cpu])!=0) {
+ smtc_ipi_nq(&freeIPIq, pipi);
+ return;
+ }
+ }
+ smtc_ipi_nq(&IPIQ[cpu], pipi);
+ } else {
+ post_direct_ipi(cpu, pipi);
+ write_tc_c0_tchalt(0);
+ UNLOCK_CORE_PRA();
+ }
+ }
+}
+
+/*
+ * Send IPI message to Halted TC, TargTC/TargVPE already having been set
+ */
+void post_direct_ipi(int cpu, struct smtc_ipi *pipi)
+{
+ struct pt_regs *kstack;
+ unsigned long tcstatus;
+ unsigned long tcrestart;
+ extern u32 kernelsp[NR_CPUS];
+ extern void __smtc_ipi_vector(void);
+
+ /* Extract Status, EPC from halted TC */
+ tcstatus = read_tc_c0_tcstatus();
+ tcrestart = read_tc_c0_tcrestart();
+ /* If TCRestart indicates a WAIT instruction, advance the PC */
+ if ((tcrestart & 0x80000000)
+ && ((*(unsigned int *)tcrestart & 0xfe00003f) == 0x42000020)) {
+ tcrestart += 4;
+ }
+ /*
+ * Save on TC's future kernel stack
+ *
+ * CU bit of Status is indicator that TC was
+ * already running on a kernel stack...
+ */
+ if(tcstatus & ST0_CU0) {
+ /* Note that this "- 1" is pointer arithmetic */
+ kstack = ((struct pt_regs *)read_tc_gpr_sp()) - 1;
+ } else {
+ kstack = ((struct pt_regs *)kernelsp[cpu]) - 1;
+ }
+
+ kstack->cp0_epc = (long)tcrestart;
+ /* Save TCStatus */
+ kstack->cp0_tcstatus = tcstatus;
+ /* Pass token of operation to be performed kernel stack pad area */
+ kstack->pad0[4] = (unsigned long)pipi;
+ /* Pass address of function to be called likewise */
+ kstack->pad0[5] = (unsigned long)&ipi_decode;
+ /* Set interrupt exempt and kernel mode */
+ tcstatus |= TCSTATUS_IXMT;
+ tcstatus &= ~TCSTATUS_TKSU;
+ write_tc_c0_tcstatus(tcstatus);
+ ehb();
+ /* Set TC Restart address to be SMTC IPI vector */
+ write_tc_c0_tcrestart(__smtc_ipi_vector);
+}
+
+void ipi_resched_interrupt(struct pt_regs *regs)
+{
+ /* Return from interrupt should be enough to cause scheduler check */
+}
+
+
+void ipi_call_interrupt(struct pt_regs *regs)
+{
+ /* Invoke generic function invocation code in smp.c */
+ smp_call_function_interrupt();
+}
+
+void ipi_decode(struct pt_regs *regs, struct smtc_ipi *pipi)
+{
+ void *arg_copy = pipi->arg;
+ int type_copy = pipi->type;
+ int dest_copy = pipi->dest;
+
+ smtc_ipi_nq(&freeIPIq, pipi);
+ switch (type_copy) {
+ case SMTC_CLOCK_TICK:
+ /* Invoke Clock "Interrupt" */
+ ipi_timer_latch[dest_copy] = 0;
+#ifdef SMTC_IDLE_HOOK_DEBUG
+ clock_hang_reported[dest_copy] = 0;
+#endif /* SMTC_IDLE_HOOK_DEBUG */
+ local_timer_interrupt(0, NULL, regs);
+ break;
+ case LINUX_SMP_IPI:
+ switch ((int)arg_copy) {
+ case SMP_RESCHEDULE_YOURSELF:
+ ipi_resched_interrupt(regs);
+ break;
+ case SMP_CALL_FUNCTION:
+ ipi_call_interrupt(regs);
+ break;
+ default:
+ printk("Impossible SMTC IPI Argument 0x%x\n",
+ (int)arg_copy);
+ break;
+ }
+ break;
+ default:
+ printk("Impossible SMTC IPI Type 0x%x\n", type_copy);
+ break;
+ }
+}
+
+void deferred_smtc_ipi(struct pt_regs *regs)
+{
+ struct smtc_ipi *pipi;
+ unsigned long flags;
+/* DEBUG */
+ int q = smp_processor_id();
+
+ /*
+ * Test is not atomic, but much faster than a dequeue,
+ * and the vast majority of invocations will have a null queue.
+ */
+ if(IPIQ[q].head != NULL) {
+ while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) {
+ /* ipi_decode() should be called with interrupts off */
+ local_irq_save(flags);
+ ipi_decode(regs, pipi);
+ local_irq_restore(flags);
+ }
+ }
+}
+
+/*
+ * Send clock tick to all TCs except the one executing the funtion
+ */
+
+void smtc_timer_broadcast(int vpe)
+{
+ int cpu;
+ int myTC = cpu_data[smp_processor_id()].tc_id;
+ int myVPE = cpu_data[smp_processor_id()].vpe_id;
+
+ smtc_cpu_stats[smp_processor_id()].timerints++;
+
+ for_each_online_cpu(cpu) {
+ if (cpu_data[cpu].vpe_id == myVPE &&
+ cpu_data[cpu].tc_id != myTC)
+ smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
+ }
+}
+
+/*
+ * Cross-VPE interrupts in the SMTC prototype use "software interrupts"
+ * set via cross-VPE MTTR manipulation of the Cause register. It would be
+ * in some regards preferable to have external logic for "doorbell" hardware
+ * interrupts.
+ */
+
+static int cpu_ipi_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_IRQ;
+
+static irqreturn_t ipi_interrupt(int irq, void *dev_idm, struct pt_regs *regs)
+{
+ int my_vpe = cpu_data[smp_processor_id()].vpe_id;
+ int my_tc = cpu_data[smp_processor_id()].tc_id;
+ int cpu;
+ struct smtc_ipi *pipi;
+ unsigned long tcstatus;
+ int sent;
+ long flags;
+ unsigned int mtflags;
+ unsigned int vpflags;
+
+ /*
+ * So long as cross-VPE interrupts are done via
+ * MFTR/MTTR read-modify-writes of Cause, we need
+ * to stop other VPEs whenever the local VPE does
+ * anything similar.
+ */
+ local_irq_save(flags);
+ vpflags = dvpe();
+ clear_c0_cause(0x100 << MIPS_CPU_IPI_IRQ);
+ set_c0_status(0x100 << MIPS_CPU_IPI_IRQ);
+ irq_enable_hazard();
+ evpe(vpflags);
+ local_irq_restore(flags);
+
+ /*
+ * Cross-VPE Interrupt handler: Try to directly deliver IPIs
+ * queued for TCs on this VPE other than the current one.
+ * Return-from-interrupt should cause us to drain the queue
+ * for the current TC, so we ought not to have to do it explicitly here.
+ */
+
+ for_each_online_cpu(cpu) {
+ if (cpu_data[cpu].vpe_id != my_vpe)
+ continue;
+
+ pipi = smtc_ipi_dq(&IPIQ[cpu]);
+ if (pipi != NULL) {
+ if (cpu_data[cpu].tc_id != my_tc) {
+ sent = 0;
+ LOCK_MT_PRA();
+ settc(cpu_data[cpu].tc_id);
+ write_tc_c0_tchalt(TCHALT_H);
+ mips_ihb();
+ tcstatus = read_tc_c0_tcstatus();
+ if ((tcstatus & TCSTATUS_IXMT) == 0) {
+ post_direct_ipi(cpu, pipi);
+ sent = 1;
+ }
+ write_tc_c0_tchalt(0);
+ UNLOCK_MT_PRA();
+ if (!sent) {
+ smtc_ipi_req(&IPIQ[cpu], pipi);
+ }
+ } else {
+ /*
+ * ipi_decode() should be called
+ * with interrupts off
+ */
+ local_irq_save(flags);
+ ipi_decode(regs, pipi);
+ local_irq_restore(flags);
+ }
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void ipi_irq_dispatch(struct pt_regs *regs)
+{
+ do_IRQ(cpu_ipi_irq, regs);
+}
+
+static struct irqaction irq_ipi;
+
+void setup_cross_vpe_interrupts(void)
+{
+ if (!cpu_has_vint)
+ panic("SMTC Kernel requires Vectored Interupt support");
+
+ set_vi_handler(MIPS_CPU_IPI_IRQ, ipi_irq_dispatch);
+
+ irq_ipi.handler = ipi_interrupt;
+ irq_ipi.flags = SA_INTERRUPT;
+ irq_ipi.name = "SMTC_IPI";
+
+ setup_irq_smtc(cpu_ipi_irq, &irq_ipi, (0x100 << MIPS_CPU_IPI_IRQ));
+
+ irq_desc[cpu_ipi_irq].status |= IRQ_PER_CPU;
+}
+
+/*
+ * SMTC-specific hacks invoked from elsewhere in the kernel.
+ */
+
+void smtc_idle_loop_hook(void)
+{
+#ifdef SMTC_IDLE_HOOK_DEBUG
+ int im;
+ int flags;
+ int mtflags;
+ int bit;
+ int vpe;
+ int tc;
+ int hook_ntcs;
+ /*
+ * printk within DMT-protected regions can deadlock,
+ * so buffer diagnostic messages for later output.
+ */
+ char *pdb_msg;
+ char id_ho_db_msg[768]; /* worst-case use should be less than 700 */
+
+ if (atomic_read(&idle_hook_initialized) == 0) { /* fast test */
+ if (atomic_add_return(1, &idle_hook_initialized) == 1) {
+ int mvpconf0;
+ /* Tedious stuff to just do once */
+ mvpconf0 = read_c0_mvpconf0();
+ hook_ntcs = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
+ if (hook_ntcs > NR_CPUS)
+ hook_ntcs = NR_CPUS;
+ for (tc = 0; tc < hook_ntcs; tc++) {
+ tcnoprog[tc] = 0;
+ clock_hang_reported[tc] = 0;
+ }
+ for (vpe = 0; vpe < 2; vpe++)
+ for (im = 0; im < 8; im++)
+ imstuckcount[vpe][im] = 0;
+ printk("Idle loop test hook initialized for %d TCs\n", hook_ntcs);
+ atomic_set(&idle_hook_initialized, 1000);
+ } else {
+ /* Someone else is initializing in parallel - let 'em finish */
+ while (atomic_read(&idle_hook_initialized) < 1000)
+ ;
+ }
+ }
+
+ /* Have we stupidly left IXMT set somewhere? */
+ if (read_c0_tcstatus() & 0x400) {
+ write_c0_tcstatus(read_c0_tcstatus() & ~0x400);
+ ehb();
+ printk("Dangling IXMT in cpu_idle()\n");
+ }
+
+ /* Have we stupidly left an IM bit turned off? */
+#define IM_LIMIT 2000
+ local_irq_save(flags);
+ mtflags = dmt();
+ pdb_msg = &id_ho_db_msg[0];
+ im = read_c0_status();
+ vpe = cpu_data[smp_processor_id()].vpe_id;
+ for (bit = 0; bit < 8; bit++) {
+ /*
+ * In current prototype, I/O interrupts
+ * are masked for VPE > 0
+ */
+ if (vpemask[vpe][bit]) {
+ if (!(im & (0x100 << bit)))
+ imstuckcount[vpe][bit]++;
+ else
+ imstuckcount[vpe][bit] = 0;
+ if (imstuckcount[vpe][bit] > IM_LIMIT) {
+ set_c0_status(0x100 << bit);
+ ehb();
+ imstuckcount[vpe][bit] = 0;
+ pdb_msg += sprintf(pdb_msg,
+ "Dangling IM %d fixed for VPE %d\n", bit,
+ vpe);
+ }
+ }
+ }
+
+ /*
+ * Now that we limit outstanding timer IPIs, check for hung TC
+ */
+ for (tc = 0; tc < NR_CPUS; tc++) {
+ /* Don't check ourself - we'll dequeue IPIs just below */
+ if ((tc != smp_processor_id()) &&
+ ipi_timer_latch[tc] > timerq_limit) {
+ if (clock_hang_reported[tc] == 0) {
+ pdb_msg += sprintf(pdb_msg,
+ "TC %d looks hung with timer latch at %d\n",
+ tc, ipi_timer_latch[tc]);
+ clock_hang_reported[tc]++;
+ }
+ }
+ }
+ emt(mtflags);
+ local_irq_restore(flags);
+ if (pdb_msg != &id_ho_db_msg[0])
+ printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg);
+#endif /* SMTC_IDLE_HOOK_DEBUG */
+ /*
+ * To the extent that we've ever turned interrupts off,
+ * we may have accumulated deferred IPIs. This is subtle.
+ * If we use the smtc_ipi_qdepth() macro, we'll get an
+ * exact number - but we'll also disable interrupts
+ * and create a window of failure where a new IPI gets
+ * queued after we test the depth but before we re-enable
+ * interrupts. So long as IXMT never gets set, however,
+ * we should be OK: If we pick up something and dispatch
+ * it here, that's great. If we see nothing, but concurrent
+ * with this operation, another TC sends us an IPI, IXMT
+ * is clear, and we'll handle it as a real pseudo-interrupt
+ * and not a pseudo-pseudo interrupt.
+ */
+ if (IPIQ[smp_processor_id()].depth > 0) {
+ struct smtc_ipi *pipi;
+ extern void self_ipi(struct smtc_ipi *);
+
+ if ((pipi = smtc_ipi_dq(&IPIQ[smp_processor_id()])) != NULL) {
+ self_ipi(pipi);
+ smtc_cpu_stats[smp_processor_id()].selfipis++;
+ }
+ }
+}
+
+void smtc_soft_dump(void)
+{
+ int i;
+
+ printk("Counter Interrupts taken per CPU (TC)\n");
+ for (i=0; i < NR_CPUS; i++) {
+ printk("%d: %ld\n", i, smtc_cpu_stats[i].timerints);
+ }
+ printk("Self-IPI invocations:\n");
+ for (i=0; i < NR_CPUS; i++) {
+ printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis);
+ }
+ smtc_ipi_qdump();
+ printk("Timer IPI Backlogs:\n");
+ for (i=0; i < NR_CPUS; i++) {
+ printk("%d: %d\n", i, ipi_timer_latch[i]);
+ }
+ printk("%d Recoveries of \"stolen\" FPU\n",
+ atomic_read(&smtc_fpu_recoveries));
+}
+
+
+/*
+ * TLB management routines special to SMTC
+ */
+
+void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
+{
+ unsigned long flags, mtflags, tcstat, prevhalt, asid;
+ int tlb, i;
+
+ /*
+ * It would be nice to be able to use a spinlock here,
+ * but this is invoked from within TLB flush routines
+ * that protect themselves with DVPE, so if a lock is
+ * held by another TC, it'll never be freed.
+ *
+ * DVPE/DMT must not be done with interrupts enabled,
+ * so even so most callers will already have disabled
+ * them, let's be really careful...
+ */
+
+ local_irq_save(flags);
+ if (smtc_status & SMTC_TLB_SHARED) {
+ mtflags = dvpe();
+ tlb = 0;
+ } else {
+ mtflags = dmt();
+ tlb = cpu_data[cpu].vpe_id;
+ }
+ asid = asid_cache(cpu);
+
+ do {
+ if (!((asid += ASID_INC) & ASID_MASK) ) {
+ if (cpu_has_vtag_icache)
+ flush_icache_all();
+ /* Traverse all online CPUs (hack requires contigous range) */
+ for (i = 0; i < num_online_cpus(); i++) {
+ /*
+ * We don't need to worry about our own CPU, nor those of
+ * CPUs who don't share our TLB.
+ */
+ if ((i != smp_processor_id()) &&
+ ((smtc_status & SMTC_TLB_SHARED) ||
+ (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))) {
+ settc(cpu_data[i].tc_id);
+ prevhalt = read_tc_c0_tchalt() & TCHALT_H;
+ if (!prevhalt) {
+ write_tc_c0_tchalt(TCHALT_H);
+ mips_ihb();
+ }
+ tcstat = read_tc_c0_tcstatus();
+ smtc_live_asid[tlb][(tcstat & ASID_MASK)] |= (asiduse)(0x1 << i);
+ if (!prevhalt)
+ write_tc_c0_tchalt(0);
+ }
+ }
+ if (!asid) /* fix version if needed */
+ asid = ASID_FIRST_VERSION;
+ local_flush_tlb_all(); /* start new asid cycle */
+ }
+ } while (smtc_live_asid[tlb][(asid & ASID_MASK)]);
+
+ /*
+ * SMTC shares the TLB within VPEs and possibly across all VPEs.
+ */
+ for (i = 0; i < num_online_cpus(); i++) {
+ if ((smtc_status & SMTC_TLB_SHARED) ||
+ (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))
+ cpu_context(i, mm) = asid_cache(i) = asid;
+ }
+
+ if (smtc_status & SMTC_TLB_SHARED)
+ evpe(mtflags);
+ else
+ emt(mtflags);
+ local_irq_restore(flags);
+}
+
+/*
+ * Invoked from macros defined in mmu_context.h
+ * which must already have disabled interrupts
+ * and done a DVPE or DMT as appropriate.
+ */
+
+void smtc_flush_tlb_asid(unsigned long asid)
+{
+ int entry;
+ unsigned long ehi;
+
+ entry = read_c0_wired();
+
+ /* Traverse all non-wired entries */
+ while (entry < current_cpu_data.tlbsize) {
+ write_c0_index(entry);
+ ehb();
+ tlb_read();
+ ehb();
+ ehi = read_c0_entryhi();
+ if((ehi & ASID_MASK) == asid) {
+ /*
+ * Invalidate only entries with specified ASID,
+ * makiing sure all entries differ.
+ */
+ write_c0_entryhi(CKSEG0 + (entry << (PAGE_SHIFT + 1)));
+ write_c0_entrylo0(0);
+ write_c0_entrylo1(0);
+ mtc0_tlbw_hazard();
+ tlb_write_indexed();
+ }
+ entry++;
+ }
+ write_c0_index(PARKED_INDEX);
+ tlbw_use_hazard();
+}
+
+/*
+ * Support for single-threading cache flush operations.
+ */
+
+int halt_state_save[NR_CPUS];
+
+/*
+ * To really, really be sure that nothing is being done
+ * by other TCs, halt them all. This code assumes that
+ * a DVPE has already been done, so while their Halted
+ * state is theoretically architecturally unstable, in
+ * practice, it's not going to change while we're looking
+ * at it.
+ */
+
+void smtc_cflush_lockdown(void)
+{
+ int cpu;
+
+ for_each_online_cpu(cpu) {
+ if (cpu != smp_processor_id()) {
+ settc(cpu_data[cpu].tc_id);
+ halt_state_save[cpu] = read_tc_c0_tchalt();
+ write_tc_c0_tchalt(TCHALT_H);
+ }
+ }
+ mips_ihb();
+}
+
+/* It would be cheating to change the cpu_online states during a flush! */
+
+void smtc_cflush_release(void)
+{
+ int cpu;
+
+ /*
+ * Start with a hazard barrier to ensure
+ * that all CACHE ops have played through.
+ */
+ mips_ihb();
+
+ for_each_online_cpu(cpu) {
+ if (cpu != smp_processor_id()) {
+ settc(cpu_data[cpu].tc_id);
+ write_tc_c0_tchalt(halt_state_save[cpu]);
+ }
+ }
+ mips_ihb();
+}
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 5e51a2d..13ff4da 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -116,8 +116,7 @@
write_c0_compare(expirelo);
/* Check to see if we have missed any timer interrupts. */
- count = read_c0_count();
- if ((count - expirelo) < 0x7fffffff) {
+ while (((count = read_c0_count()) - expirelo) < 0x7fffffff) {
/* missed_timer_count++; */
expirelo = count + cycles_per_jiffy;
write_c0_compare(expirelo);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 081e6ed..6336fe8 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -280,9 +280,16 @@
NORET_TYPE void ATTRIB_NORET die(const char * str, struct pt_regs * regs)
{
static int die_counter;
+#ifdef CONFIG_MIPS_MT_SMTC
+ unsigned long dvpret = dvpe();
+#endif /* CONFIG_MIPS_MT_SMTC */
console_verbose();
spin_lock_irq(&die_lock);
+ bust_spinlocks(1);
+#ifdef CONFIG_MIPS_MT_SMTC
+ mips_mt_regdump(dvpret);
+#endif /* CONFIG_MIPS_MT_SMTC */
printk("%s[#%d]:\n", str, ++die_counter);
show_registers(regs);
spin_unlock_irq(&die_lock);
@@ -757,6 +764,7 @@
case 2:
case 3:
+ die_if_kernel("do_cpu invoked from kernel context!", regs);
break;
}
@@ -794,6 +802,36 @@
asmlinkage void do_mt(struct pt_regs *regs)
{
+ int subcode;
+
+ die_if_kernel("MIPS MT Thread exception in kernel", regs);
+
+ subcode = (read_vpe_c0_vpecontrol() & VPECONTROL_EXCPT)
+ >> VPECONTROL_EXCPT_SHIFT;
+ switch (subcode) {
+ case 0:
+ printk(KERN_ERR "Thread Underflow\n");
+ break;
+ case 1:
+ printk(KERN_ERR "Thread Overflow\n");
+ break;
+ case 2:
+ printk(KERN_ERR "Invalid YIELD Qualifier\n");
+ break;
+ case 3:
+ printk(KERN_ERR "Gating Storage Exception\n");
+ break;
+ case 4:
+ printk(KERN_ERR "YIELD Scheduler Exception\n");
+ break;
+ case 5:
+ printk(KERN_ERR "Gating Storage Schedulier Exception\n");
+ break;
+ default:
+ printk(KERN_ERR "*** UNKNOWN THREAD EXCEPTION %d ***\n",
+ subcode);
+ break;
+ }
die_if_kernel("MIPS MT Thread exception in kernel", regs);
force_sig(SIGILL, current);
@@ -929,7 +967,15 @@
*/
void nmi_exception_handler(struct pt_regs *regs)
{
+#ifdef CONFIG_MIPS_MT_SMTC
+ unsigned long dvpret = dvpe();
+ bust_spinlocks(1);
printk("NMI taken!!!!\n");
+ mips_mt_regdump(dvpret);
+#else
+ bust_spinlocks(1);
+ printk("NMI taken!!!!\n");
+#endif /* CONFIG_MIPS_MT_SMTC */
die("NMI", regs);
while(1) ;
}
@@ -1007,7 +1053,7 @@
return set;
}
-void mips_srs_free (int set)
+void mips_srs_free(int set)
{
struct shadow_registers *sr = &shadow_registers;
@@ -1027,8 +1073,7 @@
if (addr == NULL) {
handler = (unsigned long) do_default_vi;
srs = 0;
- }
- else
+ } else
handler = (unsigned long) addr;
vi_handlers[n] = (unsigned long) addr;
@@ -1040,8 +1085,7 @@
if (cpu_has_veic) {
if (board_bind_eic_interrupt)
board_bind_eic_interrupt (n, srs);
- }
- else if (cpu_has_vint) {
+ } else if (cpu_has_vint) {
/* SRSMap is only defined if shadow sets are implemented */
if (mips_srs_max() > 1)
change_c0_srsmap (0xf << n*4, srs << n*4);
@@ -1055,6 +1099,15 @@
extern char except_vec_vi, except_vec_vi_lui;
extern char except_vec_vi_ori, except_vec_vi_end;
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * We need to provide the SMTC vectored interrupt handler
+ * not only with the address of the handler, but with the
+ * Status.IM bit to be masked before going there.
+ */
+ extern char except_vec_vi_mori;
+ const int mori_offset = &except_vec_vi_mori - &except_vec_vi;
+#endif /* CONFIG_MIPS_MT_SMTC */
const int handler_len = &except_vec_vi_end - &except_vec_vi;
const int lui_offset = &except_vec_vi_lui - &except_vec_vi;
const int ori_offset = &except_vec_vi_ori - &except_vec_vi;
@@ -1068,6 +1121,12 @@
}
memcpy (b, &except_vec_vi, handler_len);
+#ifdef CONFIG_MIPS_MT_SMTC
+ if (n > 7)
+ printk("Vector index %d exceeds SMTC maximum\n", n);
+ w = (u32 *)(b + mori_offset);
+ *w = (*w & 0xffff0000) | (0x100 << n);
+#endif /* CONFIG_MIPS_MT_SMTC */
w = (u32 *)(b + lui_offset);
*w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
w = (u32 *)(b + ori_offset);
@@ -1090,7 +1149,7 @@
return (void *)old_handler;
}
-void *set_vi_handler (int n, void *addr)
+void *set_vi_handler(int n, void *addr)
{
return set_vi_srs_handler(n, addr, 0);
}
@@ -1108,8 +1167,29 @@
extern asmlinkage int fpu_emulator_save_context(struct sigcontext *sc);
extern asmlinkage int fpu_emulator_restore_context(struct sigcontext *sc);
+#ifdef CONFIG_SMP
+static int smp_save_fp_context(struct sigcontext *sc)
+{
+ return cpu_has_fpu
+ ? _save_fp_context(sc)
+ : fpu_emulator_save_context(sc);
+}
+
+static int smp_restore_fp_context(struct sigcontext *sc)
+{
+ return cpu_has_fpu
+ ? _restore_fp_context(sc)
+ : fpu_emulator_restore_context(sc);
+}
+#endif
+
static inline void signal_init(void)
{
+#ifdef CONFIG_SMP
+ /* For now just do the cpu_has_fpu check when the functions are invoked */
+ save_fp_context = smp_save_fp_context;
+ restore_fp_context = smp_restore_fp_context;
+#else
if (cpu_has_fpu) {
save_fp_context = _save_fp_context;
restore_fp_context = _restore_fp_context;
@@ -1117,6 +1197,7 @@
save_fp_context = fpu_emulator_save_context;
restore_fp_context = fpu_emulator_restore_context;
}
+#endif
}
#ifdef CONFIG_MIPS32_COMPAT
@@ -1153,6 +1234,20 @@
{
unsigned int cpu = smp_processor_id();
unsigned int status_set = ST0_CU0;
+#ifdef CONFIG_MIPS_MT_SMTC
+ int secondaryTC = 0;
+ int bootTC = (cpu == 0);
+
+ /*
+ * Only do per_cpu_trap_init() for first TC of Each VPE.
+ * Note that this hack assumes that the SMTC init code
+ * assigns TCs consecutively and in ascending order.
+ */
+
+ if (((read_c0_tcbind() & TCBIND_CURTC) != 0) &&
+ ((read_c0_tcbind() & TCBIND_CURVPE) == cpu_data[cpu - 1].vpe_id))
+ secondaryTC = 1;
+#endif /* CONFIG_MIPS_MT_SMTC */
/*
* Disable coprocessors and select 32-bit or 64-bit addressing
@@ -1175,6 +1270,10 @@
write_c0_hwrena (0x0000000f); /* Allow rdhwr to all registers */
#endif
+#ifdef CONFIG_MIPS_MT_SMTC
+ if (!secondaryTC) {
+#endif /* CONFIG_MIPS_MT_SMTC */
+
/*
* Interrupt handling.
*/
@@ -1191,6 +1290,9 @@
} else
set_c0_cause(CAUSEF_IV);
}
+#ifdef CONFIG_MIPS_MT_SMTC
+ }
+#endif /* CONFIG_MIPS_MT_SMTC */
cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
TLBMISS_HANDLER_SETUP();
@@ -1200,8 +1302,14 @@
BUG_ON(current->mm);
enter_lazy_tlb(&init_mm, current);
- cpu_cache_init();
- tlb_init();
+#ifdef CONFIG_MIPS_MT_SMTC
+ if (bootTC) {
+#endif /* CONFIG_MIPS_MT_SMTC */
+ cpu_cache_init();
+ tlb_init();
+#ifdef CONFIG_MIPS_MT_SMTC
+ }
+#endif /* CONFIG_MIPS_MT_SMTC */
}
/* Install CPU exception handler */
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 2ad0ced..14fa00e 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -2,7 +2,7 @@
#include <asm/asm-offsets.h>
#include <asm-generic/vmlinux.lds.h>
-#undef mips /* CPP really sucks for this job */
+#undef mips
#define mips mips
OUTPUT_ARCH(mips)
ENTRY(kernel_entry)
diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c
index eab5a70..17dfe6a 100644
--- a/arch/mips/mips-boards/generic/init.c
+++ b/arch/mips/mips-boards/generic/init.c
@@ -220,7 +220,6 @@
generic_putDebugChar (*s++);
}
- kgdb_enabled = 1;
/* Breakpoint is invoked after interrupts are initialised */
}
}
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 93f3bf2..a9f6124 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -30,6 +30,7 @@
#include <linux/mc146818rtc.h>
#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
#include <asm/ptrace.h>
#include <asm/hardirq.h>
#include <asm/irq.h>
@@ -50,16 +51,23 @@
static char display_string[] = " LINUX ON ATLAS ";
#endif
#if defined(CONFIG_MIPS_MALTA)
+#if defined(CONFIG_MIPS_MT_SMTC)
+static char display_string[] = " SMTC LINUX ON MALTA ";
+#else
static char display_string[] = " LINUX ON MALTA ";
+#endif /* CONFIG_MIPS_MT_SMTC */
#endif
#if defined(CONFIG_MIPS_SEAD)
static char display_string[] = " LINUX ON SEAD ";
#endif
-static unsigned int display_count = 0;
+static unsigned int display_count;
#define MAX_DISPLAY_COUNT (sizeof(display_string) - 8)
-static unsigned int timer_tick_count=0;
+#define CPUCTR_IMASKBIT (0x100 << MIPSCPU_INT_CPUCTR)
+
+static unsigned int timer_tick_count;
static int mips_cpu_timer_irq;
+extern void smtc_timer_broadcast(int);
static inline void scroll_display_message(void)
{
@@ -75,15 +83,55 @@
do_IRQ (mips_cpu_timer_irq, regs);
}
+/*
+ * Redeclare until I get around mopping the timer code insanity on MIPS.
+ */
extern int null_perf_irq(struct pt_regs *regs);
extern int (*perf_irq)(struct pt_regs *regs);
irqreturn_t mips_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
- int r2 = cpu_has_mips_r2;
int cpu = smp_processor_id();
+ int r2 = cpu_has_mips_r2;
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * In an SMTC system, one Count/Compare set exists per VPE.
+ * Which TC within a VPE gets the interrupt is essentially
+ * random - we only know that it shouldn't be one with
+ * IXMT set. Whichever TC gets the interrupt needs to
+ * send special interprocessor interrupts to the other
+ * TCs to make sure that they schedule, etc.
+ *
+ * That code is specific to the SMTC kernel, not to
+ * the a particular platform, so it's invoked from
+ * the general MIPS timer_interrupt routine.
+ */
+
+ /*
+ * DVPE is necessary so long as cross-VPE interrupts
+ * are done via read-modify-write of Cause register.
+ */
+ int vpflags = dvpe();
+ write_c0_compare (read_c0_count() - 1);
+ clear_c0_cause(CPUCTR_IMASKBIT);
+ evpe(vpflags);
+
+ if (cpu_data[cpu].vpe_id == 0) {
+ timer_interrupt(irq, dev_id, regs);
+ scroll_display_message();
+ } else
+ write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
+ smtc_timer_broadcast(cpu_data[cpu].vpe_id);
+
+ if (cpu != 0)
+ /*
+ * Other CPUs should do profiling and process accounting
+ */
+ local_timer_interrupt(irq, dev_id, regs);
+
+#else /* CONFIG_MIPS_MT_SMTC */
if (cpu == 0) {
/*
* CPU 0 handles the global timer interrupt job and process
@@ -107,12 +155,14 @@
* More support needs to be added to kernel/time for
* counter/timer interrupts on multiple CPU's
*/
- write_c0_compare (read_c0_count() + (mips_hpt_frequency/HZ));
+ write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));
+
/*
- * other CPUs should do profiling and process accounting
+ * Other CPUs should do profiling and process accounting
*/
- local_timer_interrupt (irq, dev_id, regs);
+ local_timer_interrupt(irq, dev_id, regs);
}
+#endif /* CONFIG_MIPS_MT_SMTC */
out:
return IRQ_HANDLED;
@@ -126,7 +176,7 @@
unsigned int prid = read_c0_prid() & 0xffff00;
unsigned int count;
-#ifdef CONFIG_MIPS_SEAD
+#if defined(CONFIG_MIPS_SEAD) || defined(CONFIG_MIPS_SIM)
/*
* The SEAD board doesn't have a real time clock, so we can't
* really calculate the timer frequency
@@ -211,7 +261,11 @@
/* we are using the cpu counter for timer interrupts */
irq->handler = mips_timer_interrupt; /* we use our own handler */
+#ifdef CONFIG_MIPS_MT_SMTC
+ setup_irq_smtc(mips_cpu_timer_irq, irq, CPUCTR_IMASKBIT);
+#else
setup_irq(mips_cpu_timer_irq, irq);
+#endif /* CONFIG_MIPS_MT_SMTC */
#ifdef CONFIG_SMP
/* irq_desc(riptor) is a global resource, when the interrupt overlaps
diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile
index fd4c143..77ee5c6 100644
--- a/arch/mips/mips-boards/malta/Makefile
+++ b/arch/mips/mips-boards/malta/Makefile
@@ -20,3 +20,4 @@
#
obj-y := malta_int.o malta_setup.o
+obj-$(CONFIG_SMP) += malta_smp.o
diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c
index 1da8c18..64db07d 100644
--- a/arch/mips/mips-boards/malta/malta_int.c
+++ b/arch/mips/mips-boards/malta/malta_int.c
@@ -118,8 +118,9 @@
int irq;
irq = get_int();
- if (irq < 0)
+ if (irq < 0) {
return; /* interrupt has already been cleared */
+ }
do_IRQ(MALTA_INT_BASE+irq, regs);
}
@@ -324,9 +325,15 @@
else if (cpu_has_vint) {
set_vi_handler (MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
set_vi_handler (MIPSCPU_INT_COREHI, corehi_irqdispatch);
-
+#ifdef CONFIG_MIPS_MT_SMTC
+ setup_irq_smtc (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq,
+ (0x100 << MIPSCPU_INT_I8259A));
+ setup_irq_smtc (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI,
+ &corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI));
+#else /* Not SMTC */
setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
+#endif /* CONFIG_MIPS_MT_SMTC */
}
else {
setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
diff --git a/arch/mips/mips-boards/malta/malta_smp.c b/arch/mips/mips-boards/malta/malta_smp.c
new file mode 100644
index 0000000..6c6c8ee
--- /dev/null
+++ b/arch/mips/mips-boards/malta/malta_smp.c
@@ -0,0 +1,128 @@
+/*
+ * Malta Platform-specific hooks for SMP operation
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/smtc_ipi.h>
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+/* VPE/SMP Prototype implements platform interfaces directly */
+#if !defined(CONFIG_MIPS_MT_SMP)
+
+/*
+ * Cause the specified action to be performed on a targeted "CPU"
+ */
+
+void core_send_ipi(int cpu, unsigned int action)
+{
+/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
+#ifdef CONFIG_MIPS_MT_SMTC
+ smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Detect available CPUs/VPEs/TCs and populate phys_cpu_present_map
+ */
+
+void __init prom_build_cpu_map(void)
+{
+ int nextslot;
+
+ /*
+ * As of November, 2004, MIPSsim only simulates one core
+ * at a time. However, that core may be a MIPS MT core
+ * with multiple virtual processors and thread contexts.
+ */
+
+ if (read_c0_config3() & (1<<2)) {
+ nextslot = mipsmt_build_cpu_map(1);
+ }
+}
+
+/*
+ * Platform "CPU" startup hook
+ */
+
+void prom_boot_secondary(int cpu, struct task_struct *idle)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ smtc_boot_secondary(cpu, idle);
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Post-config but pre-boot cleanup entry point
+ */
+
+void prom_init_secondary(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ void smtc_init_secondary(void);
+ int myvpe;
+
+ /* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */
+ myvpe = read_c0_tcbind() & TCBIND_CURVPE;
+ if (myvpe != 0) {
+ /* Ideally, this should be done only once per VPE, but... */
+ clear_c0_status(STATUSF_IP2);
+ set_c0_status(STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP3
+ | STATUSF_IP4 | STATUSF_IP5 | STATUSF_IP6
+ | STATUSF_IP7);
+ }
+
+ smtc_init_secondary();
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Platform SMP pre-initialization
+ *
+ * As noted above, we can assume a single CPU for now
+ * but it may be multithreaded.
+ */
+
+void plat_smp_setup(void)
+{
+ if (read_c0_config3() & (1<<2))
+ mipsmt_build_cpu_map(0);
+}
+
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
+ if (read_c0_config3() & (1<<2))
+ mipsmt_prepare_cpus();
+}
+
+/*
+ * SMP initialization finalization entry point
+ */
+
+void prom_smp_finish(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ smtc_smp_finish();
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Hook for after all CPUs are online
+ */
+
+void prom_cpus_done(void)
+{
+}
+
+#endif /* CONFIG_MIPS32R2_MT_SMP */
diff --git a/arch/mips/mips-boards/sim/cmdline.c b/arch/mips/mips-boards/sim/cmdline.c
deleted file mode 100644
index fef9fbd..0000000
--- a/arch/mips/mips-boards/sim/cmdline.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Kernel command line creation using the prom monitor (YAMON) argc/argv.
- */
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-
-extern int prom_argc;
-extern int *_prom_argv;
-
-/*
- * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
- * This macro take care of sign extension.
- */
-#define prom_argv(index) ((char *)(((int *)(int)_prom_argv)[(index)]))
-
-char arcs_cmdline[CL_SIZE];
-
-char * __init prom_getcmdline(void)
-{
- return &(arcs_cmdline[0]);
-}
-
-
-void __init prom_init_cmdline(void)
-{
- char *cp;
- int actr;
-
- actr = 1; /* Always ignore argv[0] */
-
- cp = &(arcs_cmdline[0]);
- while(actr < prom_argc) {
- strcpy(cp, prom_argv(actr));
- cp += strlen(prom_argv(actr));
- *cp++ = ' ';
- actr++;
- }
- if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
- --cp;
- *cp = '\0';
-}
diff --git a/arch/mips/mips-boards/sim/sim_cmdline.c b/arch/mips/mips-boards/sim/sim_cmdline.c
index 9df37c6..c63021a 100644
--- a/arch/mips/mips-boards/sim/sim_cmdline.c
+++ b/arch/mips/mips-boards/sim/sim_cmdline.c
@@ -26,8 +26,10 @@
return arcs_cmdline;
}
-
void __init prom_init_cmdline(void)
{
- /* nothing to do */
+ char *cp;
+ cp = arcs_cmdline;
+ /* Get boot line from environment? */
+ *cp = '\0';
}
diff --git a/arch/mips/mips-boards/sim/sim_smp.c b/arch/mips/mips-boards/sim/sim_smp.c
index a9f0c2b..b7084e7 100644
--- a/arch/mips/mips-boards/sim/sim_smp.c
+++ b/arch/mips/mips-boards/sim/sim_smp.c
@@ -44,8 +44,6 @@
void core_send_ipi(int cpu, unsigned int action)
{
#ifdef CONFIG_MIPS_MT_SMTC
- void smtc_send_ipi(int, int, unsigned int);
-
smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
#endif /* CONFIG_MIPS_MT_SMTC */
/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
@@ -59,15 +57,8 @@
void __init prom_build_cpu_map(void)
{
#ifdef CONFIG_MIPS_MT_SMTC
- extern int mipsmt_build_cpu_map(int startslot);
int nextslot;
- cpus_clear(phys_cpu_present_map);
-
- /* Register the boot CPU */
-
- smp_prepare_boot_cpu();
-
/*
* As of November, 2004, MIPSsim only simulates one core
* at a time. However, that core may be a MIPS MT core
@@ -87,8 +78,6 @@
void prom_boot_secondary(int cpu, struct task_struct *idle)
{
#ifdef CONFIG_MIPS_MT_SMTC
- extern void smtc_boot_secondary(int cpu, struct task_struct *t);
-
smtc_boot_secondary(cpu, idle);
#endif /* CONFIG_MIPS_MT_SMTC */
}
@@ -113,7 +102,6 @@
void prom_prepare_cpus(unsigned int max_cpus)
{
#ifdef CONFIG_MIPS_MT_SMTC
- void mipsmt_prepare_cpus(int c);
/*
* As noted above, we can assume a single CPU for now
* but it may be multithreaded.
@@ -132,8 +120,6 @@
void prom_smp_finish(void)
{
#ifdef CONFIG_MIPS_MT_SMTC
- void smtc_smp_finish(void);
-
smtc_smp_finish();
#endif /* CONFIG_MIPS_MT_SMTC */
}
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index 2d9624f..e3a6172 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -157,7 +157,6 @@
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice.
*/
-
bust_spinlocks(1);
printk(KERN_ALERT "CPU %d Unable to handle kernel paging request at "
@@ -188,11 +187,20 @@
/* Kernel mode? Handle exceptions or die */
if (!user_mode(regs))
goto no_context;
-
+ else
/*
* Send a sigbus, regardless of whether we were in kernel
* or user mode.
*/
+#if 0
+ printk("do_page_fault() #3: sending SIGBUS to %s for "
+ "invalid %s\n%0*lx (epc == %0*lx, ra == %0*lx)\n",
+ tsk->comm,
+ write ? "write access to" : "read access from",
+ field, address,
+ field, (unsigned long) regs->cp0_epc,
+ field, (unsigned long) regs->regs[31]);
+#endif
tsk->thread.cp0_badvaddr = address;
info.si_signo = SIGBUS;
info.si_errno = 0;
@@ -201,7 +209,6 @@
force_sig_info(SIGBUS, &info, tsk);
return;
-
vmalloc_fault:
{
/*
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index a865f239..9dca099 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -32,13 +32,35 @@
"nop; nop; nop; nop; nop; nop;\n\t" \
".set reorder\n\t")
+/* Atomicity and interruptability */
+#ifdef CONFIG_MIPS_MT_SMTC
+
+#include <asm/smtc.h>
+#include <asm/mipsmtregs.h>
+
+#define ENTER_CRITICAL(flags) \
+ { \
+ unsigned int mvpflags; \
+ local_irq_save(flags);\
+ mvpflags = dvpe()
+#define EXIT_CRITICAL(flags) \
+ evpe(mvpflags); \
+ local_irq_restore(flags); \
+ }
+#else
+
+#define ENTER_CRITICAL(flags) local_irq_save(flags)
+#define EXIT_CRITICAL(flags) local_irq_restore(flags)
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+
void local_flush_tlb_all(void)
{
unsigned long flags;
unsigned long old_ctx;
int entry;
- local_irq_save(flags);
+ ENTER_CRITICAL(flags);
/* Save old context and create impossible VPN2 value */
old_ctx = read_c0_entryhi();
write_c0_entrylo0(0);
@@ -57,7 +79,7 @@
}
tlbw_use_hazard();
write_c0_entryhi(old_ctx);
- local_irq_restore(flags);
+ EXIT_CRITICAL(flags);
}
/* All entries common to a mm share an asid. To effectively flush
@@ -87,6 +109,7 @@
unsigned long flags;
int size;
+ ENTER_CRITICAL(flags);
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
size = (size + 1) >> 1;
local_irq_save(flags);
@@ -120,7 +143,7 @@
} else {
drop_mmu_context(mm, cpu);
}
- local_irq_restore(flags);
+ EXIT_CRITICAL(flags);
}
}
@@ -129,9 +152,9 @@
unsigned long flags;
int size;
+ ENTER_CRITICAL(flags);
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
size = (size + 1) >> 1;
- local_irq_save(flags);
if (size <= current_cpu_data.tlbsize / 2) {
int pid = read_c0_entryhi();
@@ -162,7 +185,7 @@
} else {
local_flush_tlb_all();
}
- local_irq_restore(flags);
+ EXIT_CRITICAL(flags);
}
void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
@@ -175,7 +198,7 @@
newpid = cpu_asid(cpu, vma->vm_mm);
page &= (PAGE_MASK << 1);
- local_irq_save(flags);
+ ENTER_CRITICAL(flags);
oldpid = read_c0_entryhi();
write_c0_entryhi(page | newpid);
mtc0_tlbw_hazard();
@@ -194,7 +217,7 @@
finish:
write_c0_entryhi(oldpid);
- local_irq_restore(flags);
+ EXIT_CRITICAL(flags);
}
}
@@ -207,7 +230,7 @@
unsigned long flags;
int oldpid, idx;
- local_irq_save(flags);
+ ENTER_CRITICAL(flags);
oldpid = read_c0_entryhi();
page &= (PAGE_MASK << 1);
write_c0_entryhi(page);
@@ -226,7 +249,7 @@
}
write_c0_entryhi(oldpid);
- local_irq_restore(flags);
+ EXIT_CRITICAL(flags);
}
/*
@@ -249,7 +272,7 @@
if (current->active_mm != vma->vm_mm)
return;
- local_irq_save(flags);
+ ENTER_CRITICAL(flags);
pid = read_c0_entryhi() & ASID_MASK;
address &= (PAGE_MASK << 1);
@@ -277,7 +300,7 @@
else
tlb_write_indexed();
tlbw_use_hazard();
- local_irq_restore(flags);
+ EXIT_CRITICAL(flags);
}
#if 0
@@ -291,7 +314,7 @@
pte_t *ptep;
int idx;
- local_irq_save(flags);
+ ENTER_CRITICAL(flags);
address &= (PAGE_MASK << 1);
asid = read_c0_entryhi() & ASID_MASK;
write_c0_entryhi(address | asid);
@@ -310,7 +333,7 @@
else
tlb_write_indexed();
tlbw_use_hazard();
- local_irq_restore(flags);
+ EXIT_CRITICAL(flags);
}
#endif
@@ -322,7 +345,7 @@
unsigned long old_pagemask;
unsigned long old_ctx;
- local_irq_save(flags);
+ ENTER_CRITICAL(flags);
/* Save old context and create impossible VPN2 value */
old_ctx = read_c0_entryhi();
old_pagemask = read_c0_pagemask();
@@ -342,7 +365,7 @@
BARRIER;
write_c0_pagemask(old_pagemask);
local_flush_tlb_all();
- local_irq_restore(flags);
+ EXIT_CRITICAL(flags);
}
/*
@@ -362,7 +385,7 @@
unsigned long old_pagemask;
unsigned long old_ctx;
- local_irq_save(flags);
+ ENTER_CRITICAL(flags);
/* Save old context and create impossible VPN2 value */
old_ctx = read_c0_entryhi();
old_pagemask = read_c0_pagemask();
@@ -386,10 +409,11 @@
write_c0_entryhi(old_ctx);
write_c0_pagemask(old_pagemask);
out:
- local_irq_restore(flags);
+ EXIT_CRITICAL(flags);
return ret;
}
+extern void __init sanitize_tlb_entries(void);
static void __init probe_tlb(unsigned long config)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
@@ -402,6 +426,14 @@
*/
if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY)
return;
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * If TLB is shared in SMTC system, total size already
+ * has been calculated and written into cpu_data tlbsize
+ */
+ if((smtc_status & SMTC_TLB_SHARED) == SMTC_TLB_SHARED)
+ return;
+#endif /* CONFIG_MIPS_MT_SMTC */
reg = read_c0_config1();
if (!((config >> 7) & 3))
@@ -410,6 +442,15 @@
c->tlbsize = ((reg >> 25) & 0x3f) + 1;
}
+static int __initdata ntlb = 0;
+static int __init set_ntlb(char *str)
+{
+ get_option(&str, &ntlb);
+ return 1;
+}
+
+__setup("ntlb=", set_ntlb);
+
void __init tlb_init(void)
{
unsigned int config = read_c0_config();
@@ -432,5 +473,15 @@
/* Did I tell you that ARC SUCKS? */
+ if (ntlb) {
+ if (ntlb > 1 && ntlb <= current_cpu_data.tlbsize) {
+ int wired = current_cpu_data.tlbsize - ntlb;
+ write_c0_wired(wired);
+ write_c0_index(wired-1);
+ printk ("Restricting TLB to %d entries\n", ntlb);
+ } else
+ printk("Ignoring invalid argument ntlb=%d\n", ntlb);
+ }
+
build_tlb_refill_handler();
}
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index c5eea6a..053dbac 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -7,6 +7,16 @@
*
* Copyright (C) 2004,2005 by Thiemo Seufer
* Copyright (C) 2005 Maciej W. Rozycki
+ * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * ... and the days got worse and worse and now you see
+ * I've gone completly out of my mind.
+ *
+ * They're coming to take me a away haha
+ * they're coming to take me a away hoho hihi haha
+ * to the funny farm where code is beautiful all the time ...
+ *
+ * (Condolences to Napoleon XIV)
*/
#include <stdarg.h>
@@ -68,6 +78,7 @@
BIMM = 0x040,
JIMM = 0x080,
FUNC = 0x100,
+ SET = 0x200
};
#define OP_MASK 0x2f
@@ -86,6 +97,8 @@
#define JIMM_SH 0
#define FUNC_MASK 0x2f
#define FUNC_SH 0
+#define SET_MASK 0x7
+#define SET_SH 0
enum opcode {
insn_invalid,
@@ -129,8 +142,8 @@
{ insn_bne, M(bne_op,0,0,0,0,0), RS | RT | BIMM },
{ insn_daddiu, M(daddiu_op,0,0,0,0,0), RS | RT | SIMM },
{ insn_daddu, M(spec_op,0,0,0,0,daddu_op), RS | RT | RD },
- { insn_dmfc0, M(cop0_op,dmfc_op,0,0,0,0), RT | RD },
- { insn_dmtc0, M(cop0_op,dmtc_op,0,0,0,0), RT | RD },
+ { insn_dmfc0, M(cop0_op,dmfc_op,0,0,0,0), RT | RD | SET},
+ { insn_dmtc0, M(cop0_op,dmtc_op,0,0,0,0), RT | RD | SET},
{ insn_dsll, M(spec_op,0,0,0,0,dsll_op), RT | RD | RE },
{ insn_dsll32, M(spec_op,0,0,0,0,dsll32_op), RT | RD | RE },
{ insn_dsra, M(spec_op,0,0,0,0,dsra_op), RT | RD | RE },
@@ -145,8 +158,8 @@
{ insn_lld, M(lld_op,0,0,0,0,0), RS | RT | SIMM },
{ insn_lui, M(lui_op,0,0,0,0,0), RT | SIMM },
{ insn_lw, M(lw_op,0,0,0,0,0), RS | RT | SIMM },
- { insn_mfc0, M(cop0_op,mfc_op,0,0,0,0), RT | RD },
- { insn_mtc0, M(cop0_op,mtc_op,0,0,0,0), RT | RD },
+ { insn_mfc0, M(cop0_op,mfc_op,0,0,0,0), RT | RD | SET},
+ { insn_mtc0, M(cop0_op,mtc_op,0,0,0,0), RT | RD | SET},
{ insn_ori, M(ori_op,0,0,0,0,0), RS | RT | UIMM },
{ insn_rfe, M(cop0_op,cop_op,0,0,0,rfe_op), 0 },
{ insn_sc, M(sc_op,0,0,0,0,0), RS | RT | SIMM },
@@ -242,6 +255,14 @@
return arg & FUNC_MASK;
}
+static __init u32 build_set(u32 arg)
+{
+ if (arg & ~SET_MASK)
+ printk(KERN_WARNING "TLB synthesizer field overflow\n");
+
+ return arg & SET_MASK;
+}
+
/*
* The order of opcode arguments is implicitly left to right,
* starting with RS and ending with FUNC or IMM.
@@ -273,6 +294,7 @@
if (ip->fields & BIMM) op |= build_bimm(va_arg(ap, s32));
if (ip->fields & JIMM) op |= build_jimm(va_arg(ap, u32));
if (ip->fields & FUNC) op |= build_func(va_arg(ap, u32));
+ if (ip->fields & SET) op |= build_set(va_arg(ap, u32));
va_end(ap);
**buf = op;
@@ -358,8 +380,8 @@
I_u1s2(_bltz);
I_u1s2(_bltzl);
I_u1u2s3(_bne);
-I_u1u2(_dmfc0);
-I_u1u2(_dmtc0);
+I_u1u2u3(_dmfc0);
+I_u1u2u3(_dmtc0);
I_u2u1s3(_daddiu);
I_u3u1u2(_daddu);
I_u2u1u3(_dsll);
@@ -376,8 +398,8 @@
I_u2s3u1(_lld);
I_u1s2(_lui);
I_u2s3u1(_lw);
-I_u1u2(_mfc0);
-I_u1u2(_mtc0);
+I_u1u2u3(_mfc0);
+I_u1u2u3(_mtc0);
I_u2u1u3(_ori);
I_0(_rfe);
I_u2s3u1(_sc);
@@ -451,8 +473,8 @@
# define i_SLL(buf, rs, rt, sh) i_dsll(buf, rs, rt, sh)
# define i_SRA(buf, rs, rt, sh) i_dsra(buf, rs, rt, sh)
# define i_SRL(buf, rs, rt, sh) i_dsrl(buf, rs, rt, sh)
-# define i_MFC0(buf, rt, rd) i_dmfc0(buf, rt, rd)
-# define i_MTC0(buf, rt, rd) i_dmtc0(buf, rt, rd)
+# define i_MFC0(buf, rt, rd...) i_dmfc0(buf, rt, rd)
+# define i_MTC0(buf, rt, rd...) i_dmtc0(buf, rt, rd)
# define i_ADDIU(buf, rs, rt, val) i_daddiu(buf, rs, rt, val)
# define i_ADDU(buf, rs, rt, rd) i_daddu(buf, rs, rt, rd)
# define i_SUBU(buf, rs, rt, rd) i_dsubu(buf, rs, rt, rd)
@@ -464,8 +486,8 @@
# define i_SLL(buf, rs, rt, sh) i_sll(buf, rs, rt, sh)
# define i_SRA(buf, rs, rt, sh) i_sra(buf, rs, rt, sh)
# define i_SRL(buf, rs, rt, sh) i_srl(buf, rs, rt, sh)
-# define i_MFC0(buf, rt, rd) i_mfc0(buf, rt, rd)
-# define i_MTC0(buf, rt, rd) i_mtc0(buf, rt, rd)
+# define i_MFC0(buf, rt, rd...) i_mfc0(buf, rt, rd)
+# define i_MTC0(buf, rt, rd...) i_mtc0(buf, rt, rd)
# define i_ADDIU(buf, rs, rt, val) i_addiu(buf, rs, rt, val)
# define i_ADDU(buf, rs, rt, rd) i_addu(buf, rs, rt, rd)
# define i_SUBU(buf, rs, rt, rd) i_subu(buf, rs, rt, rd)
@@ -670,14 +692,15 @@
#define K1 27
/* Some CP0 registers */
-#define C0_INDEX 0
-#define C0_ENTRYLO0 2
-#define C0_ENTRYLO1 3
-#define C0_CONTEXT 4
-#define C0_BADVADDR 8
-#define C0_ENTRYHI 10
-#define C0_EPC 14
-#define C0_XCONTEXT 20
+#define C0_INDEX 0, 0
+#define C0_ENTRYLO0 2, 0
+#define C0_TCBIND 2, 2
+#define C0_ENTRYLO1 3, 0
+#define C0_CONTEXT 4, 0
+#define C0_BADVADDR 8, 0
+#define C0_ENTRYHI 10, 0
+#define C0_EPC 14, 0
+#define C0_XCONTEXT 20, 0
#ifdef CONFIG_64BIT
# define GET_CONTEXT(buf, reg) i_MFC0(buf, reg, C0_XCONTEXT)
@@ -951,12 +974,20 @@
/* No i_nop needed here, since the next insn doesn't touch TMP. */
#ifdef CONFIG_SMP
+# ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * SMTC uses TCBind value as "CPU" index
+ */
+ i_mfc0(p, ptr, C0_TCBIND);
+ i_dsrl(p, ptr, ptr, 19);
+# else
/*
* 64 bit SMP running in XKPHYS has smp_processor_id() << 3
* stored in CONTEXT.
*/
i_dmfc0(p, ptr, C0_CONTEXT);
i_dsrl(p, ptr, ptr, 23);
+#endif
i_LA_mostly(p, tmp, pgdc);
i_daddu(p, ptr, ptr, tmp);
i_dmfc0(p, tmp, C0_BADVADDR);
@@ -1014,9 +1045,21 @@
/* 32 bit SMP has smp_processor_id() stored in CONTEXT. */
#ifdef CONFIG_SMP
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * SMTC uses TCBind value as "CPU" index
+ */
+ i_mfc0(p, ptr, C0_TCBIND);
+ i_LA_mostly(p, tmp, pgdc);
+ i_srl(p, ptr, ptr, 19);
+#else
+ /*
+ * smp_processor_id() << 3 is stored in CONTEXT.
+ */
i_mfc0(p, ptr, C0_CONTEXT);
i_LA_mostly(p, tmp, pgdc);
i_srl(p, ptr, ptr, 23);
+#endif
i_addu(p, ptr, tmp, ptr);
#else
i_LA_mostly(p, ptr, pgdc);
diff --git a/include/asm-mips/asmmacro.h b/include/asm-mips/asmmacro.h
index 30b18ea..f54aa14 100644
--- a/include/asm-mips/asmmacro.h
+++ b/include/asm-mips/asmmacro.h
@@ -17,7 +17,26 @@
#ifdef CONFIG_64BIT
#include <asm/asmmacro-64.h>
#endif
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif
+#ifdef CONFIG_MIPS_MT_SMTC
+ .macro local_irq_enable reg=t0
+ mfc0 \reg, CP0_TCSTATUS
+ ori \reg, \reg, TCSTATUS_IXMT
+ xori \reg, \reg, TCSTATUS_IXMT
+ mtc0 \reg, CP0_TCSTATUS
+ ehb
+ .endm
+
+ .macro local_irq_disable reg=t0
+ mfc0 \reg, CP0_TCSTATUS
+ ori \reg, \reg, TCSTATUS_IXMT
+ mtc0 \reg, CP0_TCSTATUS
+ ehb
+ .endm
+#else
.macro local_irq_enable reg=t0
mfc0 \reg, CP0_STATUS
ori \reg, \reg, 1
@@ -32,6 +51,7 @@
mtc0 \reg, CP0_STATUS
irq_disable_hazard
.endm
+#endif /* CONFIG_MIPS_MT_SMTC */
#ifdef CONFIG_CPU_SB1
.macro fpu_enable_hazard
@@ -48,4 +68,31 @@
.endm
#endif
+/*
+ * Temporary until all gas have MT ASE support
+ */
+ .macro DMT reg=0
+ .word (0x41600bc1 | (\reg << 16))
+ .endm
+
+ .macro EMT reg=0
+ .word (0x41600be1 | (\reg << 16))
+ .endm
+
+ .macro DVPE reg=0
+ .word (0x41600001 | (\reg << 16))
+ .endm
+
+ .macro EVPE reg=0
+ .word (0x41600021 | (\reg << 16))
+ .endm
+
+ .macro MFTR rt=0, rd=0, u=0, sel=0
+ .word (0x41000000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel))
+ .endm
+
+ .macro MTTR rt=0, rd=0, u=0, sel=0
+ .word (0x41800000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel))
+ .endm
+
#endif /* _ASM_ASMMACRO_H */
diff --git a/include/asm-mips/cpu-info.h b/include/asm-mips/cpu-info.h
index 140be1c..6572ac7 100644
--- a/include/asm-mips/cpu-info.h
+++ b/include/asm-mips/cpu-info.h
@@ -73,6 +73,16 @@
struct cache_desc dcache; /* Primary D or combined I/D cache */
struct cache_desc scache; /* Secondary cache */
struct cache_desc tcache; /* Tertiary/split secondary cache */
+#if defined(CONFIG_MIPS_MT_SMTC)
+ /*
+ * In the MIPS MT "SMTC" model, each TC is considered
+ * to be a "CPU" for the purposes of scheduling, but
+ * exception resources, ASID spaces, etc, are common
+ * to all TCs within the same VPE.
+ */
+ int vpe_id; /* Virtual Processor number */
+ int tc_id; /* Thread Context number */
+#endif /* CONFIG_MIPS_MT */
void *data; /* Additional data */
} __attribute__((aligned(SMP_CACHE_BYTES)));
diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h
index feb29a7..dadc051 100644
--- a/include/asm-mips/hazards.h
+++ b/include/asm-mips/hazards.h
@@ -284,6 +284,8 @@
#define instruction_hazard() do { } while (0)
#endif
+extern void mips_ihb(void);
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_HAZARDS_H */
diff --git a/include/asm-mips/interrupt.h b/include/asm-mips/interrupt.h
index 7743487..4bb9c06 100644
--- a/include/asm-mips/interrupt.h
+++ b/include/asm-mips/interrupt.h
@@ -19,7 +19,12 @@
" .set push \n"
" .set reorder \n"
" .set noat \n"
-#ifdef CONFIG_CPU_MIPSR2
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n"
+ " ori $1, 0x400 \n"
+ " xori $1, 0x400 \n"
+ " mtc0 $1, $2, 1 \n"
+#elif defined(CONFIG_CPU_MIPSR2)
" ei \n"
#else
" mfc0 $1,$12 \n"
@@ -62,7 +67,12 @@
" .macro local_irq_disable\n"
" .set push \n"
" .set noat \n"
-#ifdef CONFIG_CPU_MIPSR2
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 $1, $2, 1 \n"
+ " ori $1, 0x400 \n"
+ " .set noreorder \n"
+ " mtc0 $1, $2, 1 \n"
+#elif defined(CONFIG_CPU_MIPSR2)
" di \n"
#else
" mfc0 $1,$12 \n"
@@ -88,7 +98,11 @@
" .macro local_save_flags flags \n"
" .set push \n"
" .set reorder \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 \\flags, $2, 1 \n"
+#else
" mfc0 \\flags, $12 \n"
+#endif
" .set pop \n"
" .endm \n");
@@ -102,7 +116,13 @@
" .set push \n"
" .set reorder \n"
" .set noat \n"
-#ifdef CONFIG_CPU_MIPSR2
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 \\result, $2, 1 \n"
+ " ori $1, \\result, 0x400 \n"
+ " .set noreorder \n"
+ " mtc0 $1, $2, 1 \n"
+ " andi \\result, \\result, 0x400 \n"
+#elif defined(CONFIG_CPU_MIPSR2)
" di \\result \n"
" andi \\result, 1 \n"
#else
@@ -128,7 +148,14 @@
" .set push \n"
" .set noreorder \n"
" .set noat \n"
-#if defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+#ifdef CONFIG_MIPS_MT_SMTC
+ "mfc0 $1, $2, 1 \n"
+ "andi \\flags, 0x400 \n"
+ "ori $1, 0x400 \n"
+ "xori $1, 0x400 \n"
+ "or \\flags, $1 \n"
+ "mtc0 \\flags, $2, 1 \n"
+#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
/*
* Slow, but doesn't suffer from a relativly unlikely race
* condition we're having since days 1.
@@ -167,11 +194,29 @@
: "memory"); \
} while(0)
-#define irqs_disabled() \
-({ \
- unsigned long flags; \
- local_save_flags(flags); \
- !(flags & 1); \
-})
+static inline int irqs_disabled(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
+ */
+ unsigned long __result;
+
+ __asm__ __volatile__(
+ " .set noreorder \n"
+ " mfc0 %0, $2, 1 \n"
+ " andi %0, 0x400 \n"
+ " slt %0, $0, %0 \n"
+ " .set reorder \n"
+ : "=r" (__result));
+
+ return __result;
+#else
+ unsigned long flags;
+ local_save_flags(flags);
+
+ return !(flags & 1);
+#endif
+}
#endif /* _ASM_INTERRUPT_H */
diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h
index d7aecca..dde677f 100644
--- a/include/asm-mips/irq.h
+++ b/include/asm-mips/irq.h
@@ -11,6 +11,9 @@
#include <linux/config.h>
#include <linux/linkage.h>
+
+#include <asm/mipsmtregs.h>
+
#include <irq.h>
#ifdef CONFIG_I8259
@@ -26,6 +29,23 @@
extern asmlinkage unsigned int do_IRQ(unsigned int irq, struct pt_regs *regs);
+#ifdef CONFIG_MIPS_MT_SMTC
+/*
+ * Clear interrupt mask handling "backstop" if irq_hwmask
+ * entry so indicates. This implies that the ack() or end()
+ * functions will take over re-enabling the low-level mask.
+ * Otherwise it will be done on return from exception.
+ */
+#define __DO_IRQ_SMTC_HOOK() \
+do { \
+ if (irq_hwmask[irq] & 0x0000ff00) \
+ write_c0_tccontext(read_c0_tccontext() & \
+ ~(irq_hwmask[irq] & 0x0000ff00)); \
+} while (0)
+#else
+#define __DO_IRQ_SMTC_HOOK() do { } while (0)
+#endif
+
#ifdef CONFIG_PREEMPT
/*
@@ -39,6 +59,7 @@
#define do_IRQ(irq, regs) \
do { \
irq_enter(); \
+ __DO_IRQ_SMTC_HOOK(); \
__do_IRQ((irq), (regs)); \
irq_exit(); \
} while (0)
@@ -48,4 +69,12 @@
extern void arch_init_irq(void);
extern void spurious_interrupt(struct pt_regs *regs);
+#ifdef CONFIG_MIPS_MT_SMTC
+struct irqaction;
+
+extern unsigned long irq_hwmask[];
+extern int setup_irq_smtc(unsigned int irq, struct irqaction * new,
+ unsigned long hwmask);
+#endif /* CONFIG_MIPS_MT_SMTC */
+
#endif /* _ASM_IRQ_H */
diff --git a/include/asm-mips/mips_mt.h b/include/asm-mips/mips_mt.h
new file mode 100644
index 0000000..c31a312
--- /dev/null
+++ b/include/asm-mips/mips_mt.h
@@ -0,0 +1,15 @@
+/*
+ * Definitions and decalrations for MIPS MT support
+ * that are common between SMTC, VSMP, and/or AP/SP
+ * kernel models.
+ */
+#ifndef __ASM_MIPS_MT_H
+#define __ASM_MIPS_MT_H
+
+extern cpumask_t mt_fpu_cpumask;
+extern unsigned long mt_fpemul_threshold;
+
+extern void mips_mt_regdump(unsigned long previous_mvpcontrol_value);
+extern void mips_mt_set_cpuoptions(void);
+
+#endif /* __ASM_MIPS_MT_H */
diff --git a/include/asm-mips/mipsmtregs.h b/include/asm-mips/mipsmtregs.h
index a5ac1a6..f637ce7 100644
--- a/include/asm-mips/mipsmtregs.h
+++ b/include/asm-mips/mipsmtregs.h
@@ -165,7 +165,7 @@
#ifndef __ASSEMBLY__
-extern void mips_mt_regdump(void);
+extern void mips_mt_regdump(unsigned long previous_mvpcontrol_value);
static inline unsigned int dvpe(void)
{
@@ -282,8 +282,11 @@
\
__asm__ __volatile__( \
" .set push \n" \
+ " .set noat \n" \
" .set mips32r2 \n" \
- " mftgpr %0," #rt " \n" \
+ " # mftgpr $1," #rt " \n" \
+ " .word 0x41000820 | (" #rt " << 16) \n" \
+ " move %0, $1 \n" \
" .set pop \n" \
: "=r" (__res)); \
\
@@ -295,9 +298,7 @@
unsigned long __res; \
\
__asm__ __volatile__( \
- ".set noat\n\t" \
- "mftr\t%0, " #rt ", " #u ", " #sel "\n\t" \
- ".set at\n\t" \
+ " mftr %0, " #rt ", " #u ", " #sel " \n" \
: "=r" (__res)); \
\
__res; \
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index e85a42e..a2ef579 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -861,7 +861,19 @@
#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val)
#define read_c0_status() __read_32bit_c0_register($12, 0)
+#ifdef CONFIG_MIPS_MT_SMTC
+#define write_c0_status(val) \
+do { \
+ __write_32bit_c0_register($12, 0, val); \
+ __ehb(); \
+} while (0)
+#else
+/*
+ * Legacy non-SMTC code, which may be hazardous
+ * but which might not support EHB
+ */
#define write_c0_status(val) __write_32bit_c0_register($12, 0, val)
+#endif /* CONFIG_MIPS_MT_SMTC */
#define read_c0_cause() __read_32bit_c0_register($13, 0)
#define write_c0_cause(val) __write_32bit_c0_register($13, 0, val)
@@ -1004,6 +1016,9 @@
#define read_c0_taglo() __read_32bit_c0_register($28, 0)
#define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val)
+#define read_c0_dtaglo() __read_32bit_c0_register($28, 2)
+#define write_c0_dtaglo(val) __write_32bit_c0_register($28, 2, val)
+
#define read_c0_taghi() __read_32bit_c0_register($29, 0)
#define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val)
@@ -1357,6 +1372,11 @@
/*
* Manipulate bits in a c0 register.
*/
+#ifndef CONFIG_MIPS_MT_SMTC
+/*
+ * SMTC Linux requires shutting-down microthread scheduling
+ * during CP0 register read-modify-write sequences.
+ */
#define __BUILD_SET_C0(name) \
static inline unsigned int \
set_c0_##name(unsigned int set) \
@@ -1395,6 +1415,119 @@
return res; \
}
+#else /* SMTC versions that manage MT scheduling */
+
+#include <asm/interrupt.h>
+
+/*
+ * This is a duplicate of dmt() in mipsmtregs.h to avoid problems with
+ * header file recursion.
+ */
+static inline unsigned int __dmt(void)
+{
+ int res;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set mips32r2 \n"
+ " .set noat \n"
+ " .word 0x41610BC1 # dmt $1 \n"
+ " ehb \n"
+ " move %0, $1 \n"
+ " .set pop \n"
+ : "=r" (res));
+
+ instruction_hazard();
+
+ return res;
+}
+
+#define __VPECONTROL_TE_SHIFT 15
+#define __VPECONTROL_TE (1UL << __VPECONTROL_TE_SHIFT)
+
+#define __EMT_ENABLE __VPECONTROL_TE
+
+static inline void __emt(unsigned int previous)
+{
+ if ((previous & __EMT_ENABLE))
+ __asm__ __volatile__(
+ " .set noreorder \n"
+ " .set mips32r2 \n"
+ " .word 0x41600be1 # emt \n"
+ " ehb \n"
+ " .set mips0 \n"
+ " .set reorder \n");
+}
+
+static inline void __ehb(void)
+{
+ __asm__ __volatile__(
+ " ehb \n");
+}
+
+/*
+ * Note that local_irq_save/restore affect TC-specific IXMT state,
+ * not Status.IE as in non-SMTC kernel.
+ */
+
+#define __BUILD_SET_C0(name) \
+static inline unsigned int \
+set_c0_##name(unsigned int set) \
+{ \
+ unsigned int res; \
+ unsigned int omt; \
+ unsigned int flags; \
+ \
+ local_irq_save(flags); \
+ omt = __dmt(); \
+ res = read_c0_##name(); \
+ res |= set; \
+ write_c0_##name(res); \
+ __emt(omt); \
+ local_irq_restore(flags); \
+ \
+ return res; \
+} \
+ \
+static inline unsigned int \
+clear_c0_##name(unsigned int clear) \
+{ \
+ unsigned int res; \
+ unsigned int omt; \
+ unsigned int flags; \
+ \
+ local_irq_save(flags); \
+ omt = __dmt(); \
+ res = read_c0_##name(); \
+ res &= ~clear; \
+ write_c0_##name(res); \
+ __emt(omt); \
+ local_irq_restore(flags); \
+ \
+ return res; \
+} \
+ \
+static inline unsigned int \
+change_c0_##name(unsigned int change, unsigned int new) \
+{ \
+ unsigned int res; \
+ unsigned int omt; \
+ unsigned int flags; \
+ \
+ local_irq_save(flags); \
+ \
+ omt = __dmt(); \
+ res = read_c0_##name(); \
+ res &= ~change; \
+ res |= (new & change); \
+ write_c0_##name(res); \
+ __emt(omt); \
+ local_irq_restore(flags); \
+ \
+ return res; \
+}
+#endif
+
__BUILD_SET_C0(status)
__BUILD_SET_C0(cause)
__BUILD_SET_C0(config)
diff --git a/include/asm-mips/mmu_context.h b/include/asm-mips/mmu_context.h
index 61cf225..6e09f4c 100644
--- a/include/asm-mips/mmu_context.h
+++ b/include/asm-mips/mmu_context.h
@@ -17,6 +17,10 @@
#include <linux/slab.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#include <asm/smtc.h>
+#endif /* SMTC */
/*
* For the fast tlb miss handlers, we keep a per cpu array of pointers
@@ -54,6 +58,14 @@
#define ASID_INC 0x1
#define ASID_MASK 0xfff
+/* SMTC/34K debug hack - but maybe we'll keep it */
+#elif defined(CONFIG_MIPS_MT_SMTC)
+
+#define ASID_INC 0x1
+extern unsigned long smtc_asid_mask;
+#define ASID_MASK (smtc_asid_mask)
+#define HW_ASID_MASK 0xff
+/* End SMTC/34K debug hack */
#else /* FIXME: not correct for R6000 */
#define ASID_INC 0x1
@@ -76,6 +88,8 @@
#define ASID_VERSION_MASK ((unsigned long)~(ASID_MASK|(ASID_MASK-1)))
#define ASID_FIRST_VERSION ((unsigned long)(~ASID_VERSION_MASK) + 1)
+#ifndef CONFIG_MIPS_MT_SMTC
+/* Normal, classic MIPS get_new_mmu_context */
static inline void
get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
{
@@ -91,6 +105,12 @@
cpu_context(cpu, mm) = asid_cache(cpu) = asid;
}
+#else /* CONFIG_MIPS_MT_SMTC */
+
+#define get_new_mmu_context(mm,cpu) smtc_get_new_mmu_context((mm),(cpu))
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+
/*
* Initialize the context related info for a new mm_struct
* instance.
@@ -111,14 +131,46 @@
{
unsigned int cpu = smp_processor_id();
unsigned long flags;
-
+#ifdef CONFIG_MIPS_MT_SMTC
+ unsigned long oldasid;
+ unsigned long mtflags;
+ int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
local_irq_save(flags);
+ mtflags = dvpe();
+#else /* Not SMTC */
+ local_irq_save(flags);
+#endif /* CONFIG_MIPS_MT_SMTC */
/* Check if our ASID is of an older version and thus invalid */
if ((cpu_context(cpu, next) ^ asid_cache(cpu)) & ASID_VERSION_MASK)
get_new_mmu_context(next, cpu);
-
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * If the EntryHi ASID being replaced happens to be
+ * the value flagged at ASID recycling time as having
+ * an extended life, clear the bit showing it being
+ * in use by this "CPU", and if that's the last bit,
+ * free up the ASID value for use and flush any old
+ * instances of it from the TLB.
+ */
+ oldasid = (read_c0_entryhi() & ASID_MASK);
+ if(smtc_live_asid[mytlb][oldasid]) {
+ smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
+ if(smtc_live_asid[mytlb][oldasid] == 0)
+ smtc_flush_tlb_asid(oldasid);
+ }
+ /*
+ * Tread softly on EntryHi, and so long as we support
+ * having ASID_MASK smaller than the hardware maximum,
+ * make sure no "soft" bits become "hard"...
+ */
+ write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK)
+ | (cpu_context(cpu, next) & ASID_MASK));
+ ehb(); /* Make sure it propagates to TCStatus */
+ evpe(mtflags);
+#else
write_c0_entryhi(cpu_context(cpu, next));
+#endif /* CONFIG_MIPS_MT_SMTC */
TLBMISS_HANDLER_SETUP_PGD(next->pgd);
/*
@@ -151,12 +203,34 @@
unsigned long flags;
unsigned int cpu = smp_processor_id();
+#ifdef CONFIG_MIPS_MT_SMTC
+ unsigned long oldasid;
+ unsigned long mtflags;
+ int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
+#endif /* CONFIG_MIPS_MT_SMTC */
+
local_irq_save(flags);
/* Unconditionally get a new ASID. */
get_new_mmu_context(next, cpu);
+#ifdef CONFIG_MIPS_MT_SMTC
+ /* See comments for similar code above */
+ mtflags = dvpe();
+ oldasid = read_c0_entryhi() & ASID_MASK;
+ if(smtc_live_asid[mytlb][oldasid]) {
+ smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
+ if(smtc_live_asid[mytlb][oldasid] == 0)
+ smtc_flush_tlb_asid(oldasid);
+ }
+ /* See comments for similar code above */
+ write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) |
+ (cpu_context(cpu, next) & ASID_MASK));
+ ehb(); /* Make sure it propagates to TCStatus */
+ evpe(mtflags);
+#else
write_c0_entryhi(cpu_context(cpu, next));
+#endif /* CONFIG_MIPS_MT_SMTC */
TLBMISS_HANDLER_SETUP_PGD(next->pgd);
/* mark mmu ownership change */
@@ -174,17 +248,49 @@
drop_mmu_context(struct mm_struct *mm, unsigned cpu)
{
unsigned long flags;
+#ifdef CONFIG_MIPS_MT_SMTC
+ unsigned long oldasid;
+ /* Can't use spinlock because called from TLB flush within DVPE */
+ unsigned int prevvpe;
+ int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
+#endif /* CONFIG_MIPS_MT_SMTC */
local_irq_save(flags);
if (cpu_isset(cpu, mm->cpu_vm_mask)) {
get_new_mmu_context(mm, cpu);
+#ifdef CONFIG_MIPS_MT_SMTC
+ /* See comments for similar code above */
+ prevvpe = dvpe();
+ oldasid = (read_c0_entryhi() & ASID_MASK);
+ if(smtc_live_asid[mytlb][oldasid]) {
+ smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
+ if(smtc_live_asid[mytlb][oldasid] == 0)
+ smtc_flush_tlb_asid(oldasid);
+ }
+ /* See comments for similar code above */
+ write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK)
+ | cpu_asid(cpu, mm));
+ ehb(); /* Make sure it propagates to TCStatus */
+ evpe(prevvpe);
+#else /* not CONFIG_MIPS_MT_SMTC */
write_c0_entryhi(cpu_asid(cpu, mm));
+#endif /* CONFIG_MIPS_MT_SMTC */
} else {
/* will get a new context next time */
+#ifndef CONFIG_MIPS_MT_SMTC
cpu_context(cpu, mm) = 0;
- }
+#else /* SMTC */
+ int i;
+ /* SMTC shares the TLB (and ASIDs) across VPEs */
+ for (i = 0; i < num_online_cpus(); i++) {
+ if((smtc_status & SMTC_TLB_SHARED)
+ || (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))
+ cpu_context(i, mm) = 0;
+ }
+#endif /* CONFIG_MIPS_MT_SMTC */
+ }
local_irq_restore(flags);
}
diff --git a/include/asm-mips/processor.h b/include/asm-mips/processor.h
index 39d2bd5..7866513 100644
--- a/include/asm-mips/processor.h
+++ b/include/asm-mips/processor.h
@@ -12,6 +12,7 @@
#define _ASM_PROCESSOR_H
#include <linux/config.h>
+#include <linux/cpumask.h>
#include <linux/threads.h>
#include <asm/cachectl.h>
@@ -107,6 +108,10 @@
#define INIT_DSP {{0,},}
+#define INIT_CPUMASK { \
+ {0,} \
+}
+
typedef struct {
unsigned long seg;
} mm_segment_t;
@@ -142,6 +147,7 @@
#define MF_LOGADE 2 /* Log address errors to syslog */
#define MF_32BIT_REGS 4 /* also implies 16/32 fprs */
#define MF_32BIT_ADDR 8 /* 32-bit address space (o32/n32) */
+#define MF_FPUBOUND 0x10 /* thread bound to FPU-full CPU set */
unsigned long mflags;
unsigned long irix_trampoline; /* Wheee... */
unsigned long irix_oldctx;
diff --git a/include/asm-mips/ptrace.h b/include/asm-mips/ptrace.h
index 95c5839..fa9d871 100644
--- a/include/asm-mips/ptrace.h
+++ b/include/asm-mips/ptrace.h
@@ -45,6 +45,10 @@
unsigned long cp0_badvaddr;
unsigned long cp0_cause;
unsigned long cp0_epc;
+#ifdef CONFIG_MIPS_MT_SMTC
+ unsigned long cp0_tcstatus;
+ unsigned long smtc_pad;
+#endif /* CONFIG_MIPS_MT_SMTC */
};
/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
diff --git a/include/asm-mips/r4kcache.h b/include/asm-mips/r4kcache.h
index 2f2eb953..3c8e3c8 100644
--- a/include/asm-mips/r4kcache.h
+++ b/include/asm-mips/r4kcache.h
@@ -15,6 +15,7 @@
#include <asm/asm.h>
#include <asm/cacheops.h>
#include <asm/cpu-features.h>
+#include <asm/mipsmtregs.h>
/*
* This macro return a properly sign-extended address suitable as base address
@@ -39,14 +40,118 @@
: \
: "i" (op), "R" (*(unsigned char *)(addr)))
+#ifdef CONFIG_MIPS_MT
+/*
+ * Temporary hacks for SMTC debug. Optionally force single-threaded
+ * execution during I-cache flushes.
+ */
+
+#define PROTECT_CACHE_FLUSHES 1
+
+#ifdef PROTECT_CACHE_FLUSHES
+
+extern int mt_protiflush;
+extern int mt_protdflush;
+extern void mt_cflush_lockdown(void);
+extern void mt_cflush_release(void);
+
+#define BEGIN_MT_IPROT \
+ unsigned long flags = 0; \
+ unsigned long mtflags = 0; \
+ if(mt_protiflush) { \
+ local_irq_save(flags); \
+ ehb(); \
+ mtflags = dvpe(); \
+ mt_cflush_lockdown(); \
+ }
+
+#define END_MT_IPROT \
+ if(mt_protiflush) { \
+ mt_cflush_release(); \
+ evpe(mtflags); \
+ local_irq_restore(flags); \
+ }
+
+#define BEGIN_MT_DPROT \
+ unsigned long flags = 0; \
+ unsigned long mtflags = 0; \
+ if(mt_protdflush) { \
+ local_irq_save(flags); \
+ ehb(); \
+ mtflags = dvpe(); \
+ mt_cflush_lockdown(); \
+ }
+
+#define END_MT_DPROT \
+ if(mt_protdflush) { \
+ mt_cflush_release(); \
+ evpe(mtflags); \
+ local_irq_restore(flags); \
+ }
+
+#else
+
+#define BEGIN_MT_IPROT
+#define BEGIN_MT_DPROT
+#define END_MT_IPROT
+#define END_MT_DPROT
+
+#endif /* PROTECT_CACHE_FLUSHES */
+
+#define __iflush_prologue \
+ unsigned long redundance; \
+ extern int mt_n_iflushes; \
+ BEGIN_MT_IPROT \
+ for (redundance = 0; redundance < mt_n_iflushes; redundance++) {
+
+#define __iflush_epilogue \
+ END_MT_IPROT \
+ }
+
+#define __dflush_prologue \
+ unsigned long redundance; \
+ extern int mt_n_dflushes; \
+ BEGIN_MT_DPROT \
+ for (redundance = 0; redundance < mt_n_dflushes; redundance++) {
+
+#define __dflush_epilogue \
+ END_MT_DPROT \
+ }
+
+#define __inv_dflush_prologue __dflush_prologue
+#define __inv_dflush_epilogue __dflush_epilogue
+#define __sflush_prologue {
+#define __sflush_epilogue }
+#define __inv_sflush_prologue __sflush_prologue
+#define __inv_sflush_epilogue __sflush_epilogue
+
+#else /* CONFIG_MIPS_MT */
+
+#define __iflush_prologue {
+#define __iflush_epilogue }
+#define __dflush_prologue {
+#define __dflush_epilogue }
+#define __inv_dflush_prologue {
+#define __inv_dflush_epilogue }
+#define __sflush_prologue {
+#define __sflush_epilogue }
+#define __inv_sflush_prologue {
+#define __inv_sflush_epilogue }
+
+#endif /* CONFIG_MIPS_MT */
+
static inline void flush_icache_line_indexed(unsigned long addr)
{
+ __iflush_prologue
cache_op(Index_Invalidate_I, addr);
+ __iflush_epilogue
}
static inline void flush_dcache_line_indexed(unsigned long addr)
{
+ __dflush_prologue
cache_op(Index_Writeback_Inv_D, addr);
+ __dflush_epilogue
}
static inline void flush_scache_line_indexed(unsigned long addr)
@@ -56,17 +161,23 @@
static inline void flush_icache_line(unsigned long addr)
{
+ __iflush_prologue
cache_op(Hit_Invalidate_I, addr);
+ __iflush_epilogue
}
static inline void flush_dcache_line(unsigned long addr)
{
+ __dflush_prologue
cache_op(Hit_Writeback_Inv_D, addr);
+ __dflush_epilogue
}
static inline void invalidate_dcache_line(unsigned long addr)
{
+ __dflush_prologue
cache_op(Hit_Invalidate_D, addr);
+ __dflush_epilogue
}
static inline void invalidate_scache_line(unsigned long addr)
@@ -239,9 +350,13 @@
current_cpu_data.desc.waybit; \
unsigned long ws, addr; \
\
+ __##pfx##flush_prologue \
+ \
for (ws = 0; ws < ws_end; ws += ws_inc) \
for (addr = start; addr < end; addr += lsize * 32) \
cache##lsize##_unroll32(addr|ws,indexop); \
+ \
+ __##pfx##flush_epilogue \
} \
\
static inline void blast_##pfx##cache##lsize##_page(unsigned long page) \
@@ -249,10 +364,14 @@
unsigned long start = page; \
unsigned long end = page + PAGE_SIZE; \
\
+ __##pfx##flush_prologue \
+ \
do { \
cache##lsize##_unroll32(start,hitop); \
start += lsize * 32; \
} while (start < end); \
+ \
+ __##pfx##flush_epilogue \
} \
\
static inline void blast_##pfx##cache##lsize##_page_indexed(unsigned long page) \
@@ -265,9 +384,13 @@
current_cpu_data.desc.waybit; \
unsigned long ws, addr; \
\
+ __##pfx##flush_prologue \
+ \
for (ws = 0; ws < ws_end; ws += ws_inc) \
for (addr = start; addr < end; addr += lsize * 32) \
cache##lsize##_unroll32(addr|ws,indexop); \
+ \
+ __##pfx##flush_epilogue \
}
__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
@@ -288,12 +411,17 @@
unsigned long lsize = cpu_##desc##_line_size(); \
unsigned long addr = start & ~(lsize - 1); \
unsigned long aend = (end - 1) & ~(lsize - 1); \
+ \
+ __##pfx##flush_prologue \
+ \
while (1) { \
prot##cache_op(hitop, addr); \
if (addr == aend) \
break; \
addr += lsize; \
} \
+ \
+ __##pfx##flush_epilogue \
}
__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
diff --git a/include/asm-mips/smtc.h b/include/asm-mips/smtc.h
new file mode 100644
index 0000000..e1941d1
--- /dev/null
+++ b/include/asm-mips/smtc.h
@@ -0,0 +1,55 @@
+#ifndef _ASM_SMTC_MT_H
+#define _ASM_SMTC_MT_H
+
+/*
+ * Definitions for SMTC multitasking on MIPS MT cores
+ */
+
+#include <asm/mips_mt.h>
+
+/*
+ * System-wide SMTC status information
+ */
+
+extern unsigned int smtc_status;
+
+#define SMTC_TLB_SHARED 0x00000001
+#define SMTC_MTC_ACTIVE 0x00000002
+
+/*
+ * TLB/ASID Management information
+ */
+
+#define MAX_SMTC_TLBS 2
+#define MAX_SMTC_ASIDS 256
+#if NR_CPUS <= 8
+typedef char asiduse;
+#else
+#if NR_CPUS <= 16
+typedef short asiduse;
+#else
+typedef long asiduse;
+#endif
+#endif
+
+extern asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
+
+void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu);
+
+void smtc_flush_tlb_asid(unsigned long asid);
+extern int mipsmt_build_cpu_map(int startslot);
+extern void mipsmt_prepare_cpus(void);
+extern void smtc_smp_finish(void);
+extern void smtc_boot_secondary(int cpu, struct task_struct *t);
+
+/*
+ * Sharing the TLB between multiple VPEs means that the
+ * "random" index selection function is not allowed to
+ * select the current value of the Index register. To
+ * avoid additional TLB pressure, the Index registers
+ * are "parked" with an non-Valid value.
+ */
+
+#define PARKED_INDEX ((unsigned int)0x80000000)
+
+#endif /* _ASM_SMTC_MT_H */
diff --git a/include/asm-mips/smtc_ipi.h b/include/asm-mips/smtc_ipi.h
new file mode 100644
index 0000000..f22c3e2
--- /dev/null
+++ b/include/asm-mips/smtc_ipi.h
@@ -0,0 +1,118 @@
+/*
+ * Definitions used in MIPS MT SMTC "Interprocessor Interrupt" code.
+ */
+#ifndef __ASM_SMTC_IPI_H
+#define __ASM_SMTC_IPI_H
+
+//#define SMTC_IPI_DEBUG
+
+#ifdef SMTC_IPI_DEBUG
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#endif /* SMTC_IPI_DEBUG */
+
+/*
+ * An IPI "message"
+ */
+
+struct smtc_ipi {
+ struct smtc_ipi *flink;
+ int type;
+ void *arg;
+ int dest;
+#ifdef SMTC_IPI_DEBUG
+ int sender;
+ long stamp;
+#endif /* SMTC_IPI_DEBUG */
+};
+
+/*
+ * Defined IPI Types
+ */
+
+#define LINUX_SMP_IPI 1
+#define SMTC_CLOCK_TICK 2
+
+/*
+ * A queue of IPI messages
+ */
+
+struct smtc_ipi_q {
+ struct smtc_ipi *head;
+ spinlock_t lock;
+ struct smtc_ipi *tail;
+ int depth;
+};
+
+extern struct smtc_ipi_q IPIQ[NR_CPUS];
+extern struct smtc_ipi_q freeIPIq;
+
+static inline void smtc_ipi_nq(struct smtc_ipi_q *q, struct smtc_ipi *p)
+{
+ long flags;
+
+ spin_lock_irqsave(&q->lock, flags);
+ if (q->head == NULL)
+ q->head = q->tail = p;
+ else
+ q->tail->flink = p;
+ p->flink = NULL;
+ q->tail = p;
+ q->depth++;
+#ifdef SMTC_IPI_DEBUG
+ p->sender = read_c0_tcbind();
+ p->stamp = read_c0_count();
+#endif /* SMTC_IPI_DEBUG */
+ spin_unlock_irqrestore(&q->lock, flags);
+}
+
+static inline struct smtc_ipi *smtc_ipi_dq(struct smtc_ipi_q *q)
+{
+ struct smtc_ipi *p;
+ long flags;
+
+ spin_lock_irqsave(&q->lock, flags);
+ if (q->head == NULL)
+ p = NULL;
+ else {
+ p = q->head;
+ q->head = q->head->flink;
+ q->depth--;
+ /* Arguably unnecessary, but leaves queue cleaner */
+ if (q->head == NULL)
+ q->tail = NULL;
+ }
+ spin_unlock_irqrestore(&q->lock, flags);
+ return p;
+}
+
+static inline void smtc_ipi_req(struct smtc_ipi_q *q, struct smtc_ipi *p)
+{
+ long flags;
+
+ spin_lock_irqsave(&q->lock, flags);
+ if (q->head == NULL) {
+ q->head = q->tail = p;
+ p->flink = NULL;
+ } else {
+ p->flink = q->head;
+ q->head = p;
+ }
+ q->depth++;
+ spin_unlock_irqrestore(&q->lock, flags);
+}
+
+static inline int smtc_ipi_qdepth(struct smtc_ipi_q *q)
+{
+ long flags;
+ int retval;
+
+ spin_lock_irqsave(&q->lock, flags);
+ retval = q->depth;
+ spin_unlock_irqrestore(&q->lock, flags);
+ return retval;
+}
+
+extern void smtc_send_ipi(int cpu, int type, unsigned int action);
+
+#endif /* __ASM_SMTC_IPI_H */
diff --git a/include/asm-mips/smtc_proc.h b/include/asm-mips/smtc_proc.h
new file mode 100644
index 0000000..25da651
--- /dev/null
+++ b/include/asm-mips/smtc_proc.h
@@ -0,0 +1,23 @@
+/*
+ * Definitions for SMTC /proc entries
+ * Copyright(C) 2005 MIPS Technologies Inc.
+ */
+#ifndef __ASM_SMTC_PROC_H
+#define __ASM_SMTC_PROC_H
+
+/*
+ * per-"CPU" statistics
+ */
+
+struct smtc_cpu_proc {
+ unsigned long timerints;
+ unsigned long selfipis;
+};
+
+extern struct smtc_cpu_proc smtc_cpu_stats[NR_CPUS];
+
+/* Count of number of recoveries of "stolen" FPU access rights on 34K */
+
+extern atomic_t smtc_fpu_recoveries;
+
+#endif /* __ASM_SMTC_PROC_H */
diff --git a/include/asm-mips/stackframe.h b/include/asm-mips/stackframe.h
index 2acf3e8..c4856a8 100644
--- a/include/asm-mips/stackframe.h
+++ b/include/asm-mips/stackframe.h
@@ -14,9 +14,14 @@
#include <linux/threads.h>
#include <asm/asm.h>
+#include <asm/asmmacro.h>
#include <asm/mipsregs.h>
#include <asm/asm-offsets.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif /* CONFIG_MIPS_MT_SMTC */
+
.macro SAVE_AT
.set push
.set noat
@@ -57,13 +62,30 @@
#ifdef CONFIG_SMP
.macro get_saved_sp /* SMP variation */
#ifdef CONFIG_32BIT
+#ifdef CONFIG_MIPS_MT_SMTC
+ .set mips32
+ mfc0 k0, CP0_TCBIND;
+ .set mips0
+ lui k1, %hi(kernelsp)
+ srl k0, k0, 19
+ /* No need to shift down and up to clear bits 0-1 */
+#else
mfc0 k0, CP0_CONTEXT
lui k1, %hi(kernelsp)
srl k0, k0, 23
+#endif
addu k1, k0
LONG_L k1, %lo(kernelsp)(k1)
#endif
#ifdef CONFIG_64BIT
+#ifdef CONFIG_MIPS_MT_SMTC
+ .set mips64
+ mfc0 k0, CP0_TCBIND;
+ .set mips0
+ lui k0, %highest(kernelsp)
+ dsrl k1, 19
+ /* No need to shift down and up to clear bits 0-2 */
+#else
MFC0 k1, CP0_CONTEXT
lui k0, %highest(kernelsp)
dsrl k1, 23
@@ -71,20 +93,31 @@
dsll k0, k0, 16
daddiu k0, %hi(kernelsp)
dsll k0, k0, 16
+#endif /* CONFIG_MIPS_MT_SMTC */
daddu k1, k1, k0
LONG_L k1, %lo(kernelsp)(k1)
-#endif
+#endif /* CONFIG_64BIT */
.endm
.macro set_saved_sp stackp temp temp2
#ifdef CONFIG_32BIT
+#ifdef CONFIG_MIPS_MT_SMTC
+ mfc0 \temp, CP0_TCBIND
+ srl \temp, 19
+#else
mfc0 \temp, CP0_CONTEXT
srl \temp, 23
#endif
+#endif
#ifdef CONFIG_64BIT
+#ifdef CONFIG_MIPS_MT_SMTC
+ mfc0 \temp, CP0_TCBIND
+ dsrl \temp, 19
+#else
MFC0 \temp, CP0_CONTEXT
dsrl \temp, 23
#endif
+#endif
LONG_S \stackp, kernelsp(\temp)
.endm
#else
@@ -122,10 +155,25 @@
PTR_SUBU sp, k1, PT_SIZE
LONG_S k0, PT_R29(sp)
LONG_S $3, PT_R3(sp)
+ /*
+ * You might think that you don't need to save $0,
+ * but the FPU emulator and gdb remote debug stub
+ * need it to operate correctly
+ */
LONG_S $0, PT_R0(sp)
mfc0 v1, CP0_STATUS
LONG_S $2, PT_R2(sp)
LONG_S v1, PT_STATUS(sp)
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * Ideally, these instructions would be shuffled in
+ * to cover the pipeline delay.
+ */
+ .set mips32
+ mfc0 v1, CP0_TCSTATUS
+ .set mips0
+ LONG_S v1, PT_TCSTATUS(sp)
+#endif /* CONFIG_MIPS_MT_SMTC */
LONG_S $4, PT_R4(sp)
mfc0 v1, CP0_CAUSE
LONG_S $5, PT_R5(sp)
@@ -234,14 +282,36 @@
.endm
#else
+/*
+ * For SMTC kernel, global IE should be left set, and interrupts
+ * controlled exclusively via IXMT.
+ */
+#ifdef CONFIG_MIPS_MT_SMTC
+#define STATMASK 0x1e
+#else
+#define STATMASK 0x1f
+#endif
.macro RESTORE_SOME
.set push
.set reorder
.set noat
+#ifdef CONFIG_MIPS_MT_SMTC
+ .set mips32r2
+ /*
+ * This may not really be necessary if ints are already
+ * inhibited here.
+ */
+ mfc0 v0, CP0_TCSTATUS
+ ori v0, TCSTATUS_IXMT
+ mtc0 v0, CP0_TCSTATUS
+ ehb
+ DMT 5 # dmt a1
+ jal mips_ihb
+#endif /* CONFIG_MIPS_MT_SMTC */
mfc0 a0, CP0_STATUS
- ori a0, 0x1f
- xori a0, 0x1f
+ ori a0, STATMASK
+ xori a0, STATMASK
mtc0 a0, CP0_STATUS
li v1, 0xff00
and a0, v1
@@ -250,6 +320,26 @@
and v0, v1
or v0, a0
mtc0 v0, CP0_STATUS
+#ifdef CONFIG_MIPS_MT_SMTC
+/*
+ * Only after EXL/ERL have been restored to status can we
+ * restore TCStatus.IXMT.
+ */
+ LONG_L v1, PT_TCSTATUS(sp)
+ ehb
+ mfc0 v0, CP0_TCSTATUS
+ andi v1, TCSTATUS_IXMT
+ /* We know that TCStatua.IXMT should be set from above */
+ xori v0, v0, TCSTATUS_IXMT
+ or v0, v0, v1
+ mtc0 v0, CP0_TCSTATUS
+ ehb
+ andi a1, a1, VPECONTROL_TE
+ beqz a1, 1f
+ emt
+1:
+ .set mips0
+#endif /* CONFIG_MIPS_MT_SMTC */
LONG_L v1, PT_EPC(sp)
MTC0 v1, CP0_EPC
LONG_L $31, PT_R31(sp)
@@ -302,11 +392,33 @@
* Set cp0 enable bit as sign that we're running on the kernel stack
*/
.macro CLI
+#if !defined(CONFIG_MIPS_MT_SMTC)
mfc0 t0, CP0_STATUS
li t1, ST0_CU0 | 0x1f
or t0, t1
xori t0, 0x1f
mtc0 t0, CP0_STATUS
+#else /* CONFIG_MIPS_MT_SMTC */
+ /*
+ * For SMTC, we need to set privilege
+ * and disable interrupts only for the
+ * current TC, using the TCStatus register.
+ */
+ mfc0 t0,CP0_TCSTATUS
+ /* Fortunately CU 0 is in the same place in both registers */
+ /* Set TCU0, TMX, TKSU (for later inversion) and IXMT */
+ li t1, ST0_CU0 | 0x08001c00
+ or t0,t1
+ /* Clear TKSU, leave IXMT */
+ xori t0, 0x00001800
+ mtc0 t0, CP0_TCSTATUS
+ ehb
+ /* We need to leave the global IE bit set, but clear EXL...*/
+ mfc0 t0, CP0_STATUS
+ ori t0, ST0_EXL | ST0_ERL
+ xori t0, ST0_EXL | ST0_ERL
+ mtc0 t0, CP0_STATUS
+#endif /* CONFIG_MIPS_MT_SMTC */
irq_disable_hazard
.endm
@@ -315,11 +427,35 @@
* Set cp0 enable bit as sign that we're running on the kernel stack
*/
.macro STI
+#if !defined(CONFIG_MIPS_MT_SMTC)
mfc0 t0, CP0_STATUS
li t1, ST0_CU0 | 0x1f
or t0, t1
xori t0, 0x1e
mtc0 t0, CP0_STATUS
+#else /* CONFIG_MIPS_MT_SMTC */
+ /*
+ * For SMTC, we need to set privilege
+ * and enable interrupts only for the
+ * current TC, using the TCStatus register.
+ */
+ ehb
+ mfc0 t0,CP0_TCSTATUS
+ /* Fortunately CU 0 is in the same place in both registers */
+ /* Set TCU0, TKSU (for later inversion) and IXMT */
+ li t1, ST0_CU0 | 0x08001c00
+ or t0,t1
+ /* Clear TKSU *and* IXMT */
+ xori t0, 0x00001c00
+ mtc0 t0, CP0_TCSTATUS
+ ehb
+ /* We need to leave the global IE bit set, but clear EXL...*/
+ mfc0 t0, CP0_STATUS
+ ori t0, ST0_EXL
+ xori t0, ST0_EXL
+ mtc0 t0, CP0_STATUS
+ /* irq_enable_hazard below should expand to EHB for 24K/34K cpus */
+#endif /* CONFIG_MIPS_MT_SMTC */
irq_enable_hazard
.endm
@@ -328,11 +464,56 @@
* Set cp0 enable bit as sign that we're running on the kernel stack
*/
.macro KMODE
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * This gets baroque in SMTC. We want to
+ * protect the non-atomic clearing of EXL
+ * with DMT/EMT, but we don't want to take
+ * an interrupt while DMT is still in effect.
+ */
+
+ /* KMODE gets invoked from both reorder and noreorder code */
+ .set push
+ .set mips32r2
+ .set noreorder
+ mfc0 v0, CP0_TCSTATUS
+ andi v1, v0, TCSTATUS_IXMT
+ ori v0, TCSTATUS_IXMT
+ mtc0 v0, CP0_TCSTATUS
+ ehb
+ DMT 2 # dmt v0
+ /*
+ * We don't know a priori if ra is "live"
+ */
+ move t0, ra
+ jal mips_ihb
+ nop /* delay slot */
+ move ra, t0
+#endif /* CONFIG_MIPS_MT_SMTC */
mfc0 t0, CP0_STATUS
li t1, ST0_CU0 | 0x1e
or t0, t1
xori t0, 0x1e
mtc0 t0, CP0_STATUS
+#ifdef CONFIG_MIPS_MT_SMTC
+ ehb
+ andi v0, v0, VPECONTROL_TE
+ beqz v0, 2f
+ nop /* delay slot */
+ emt
+2:
+ mfc0 v0, CP0_TCSTATUS
+ /* Clear IXMT, then OR in previous value */
+ ori v0, TCSTATUS_IXMT
+ xori v0, TCSTATUS_IXMT
+ or v0, v1, v0
+ mtc0 v0, CP0_TCSTATUS
+ /*
+ * irq_disable_hazard below should expand to EHB
+ * on 24K/34K CPUS
+ */
+ .set pop
+#endif /* CONFIG_MIPS_MT_SMTC */
irq_disable_hazard
.endm