blob: 888dd767a0b34dd3964d6cc530346398f1ed4dbc [file] [log] [blame]
/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <dt-bindings/clock/imx6sx-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "imx6sx-pinfunc.h"
#include "skeleton.dtsi"
/ {
aliases {
can0 = &flexcan1;
can1 = &flexcan2;
ethernet0 = &fec1;
ethernet1 = &fec2;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
gpio5 = &gpio6;
gpio6 = &gpio7;
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
i2c3 = &i2c4;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
mmc2 = &usdhc3;
mmc3 = &usdhc4;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
serial5 = &uart6;
spi0 = &ecspi1;
spi1 = &ecspi2;
spi2 = &ecspi3;
spi3 = &ecspi4;
spi4 = &ecspi5;
usbphy0 = &usbphy1;
usbphy1 = &usbphy2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
operating-points = <
/* kHz uV */
996000 1250000
792000 1175000
396000 1075000
>;
fsl,soc-operating-points = <
/* ARM kHz SOC uV */
996000 1175000
792000 1175000
396000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clks IMX6SX_CLK_ARM>,
<&clks IMX6SX_CLK_PLL2_PFD2>,
<&clks IMX6SX_CLK_STEP>,
<&clks IMX6SX_CLK_PLL1_SW>,
<&clks IMX6SX_CLK_PLL1_SYS>;
clock-names = "arm", "pll2_pfd2_396m", "step",
"pll1_sw", "pll1_sys";
arm-supply = <&reg_arm>;
soc-supply = <&reg_soc>;
};
};
intc: interrupt-controller@00a01000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x00a01000 0x1000>,
<0x00a00100 0x100>;
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
ckil: clock@0 {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "ckil";
};
osc: clock@1 {
compatible = "fixed-clock";
reg = <1>;
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "osc";
};
ipp_di0: clock@2 {
compatible = "fixed-clock";
reg = <2>;
#clock-cells = <0>;
clock-frequency = <0>;
clock-output-names = "ipp_di0";
};
ipp_di1: clock@3 {
compatible = "fixed-clock";
reg = <3>;
#clock-cells = <0>;
clock-frequency = <0>;
clock-output-names = "ipp_di1";
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&intc>;
ranges;
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
};
ocram: sram@00900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
clocks = <&clks IMX6SX_CLK_OCRAM>;
};
L2: l2-cache@00a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
cache-unified;
cache-level = <2>;
arm,tag-latency = <4 2 3>;
arm,data-latency = <4 2 3>;
};
dma_apbh: dma-apbh@01804000 {
compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x01804000 0x2000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
#dma-cells = <1>;
dma-channels = <4>;
clocks = <&clks IMX6SX_CLK_APBH_DMA>;
};
gpmi: gpmi-nand@01806000{
compatible = "fsl,imx6sx-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
reg-names = "gpmi-nand", "bch";
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "bch";
clocks = <&clks IMX6SX_CLK_GPMI_IO>,
<&clks IMX6SX_CLK_GPMI_APB>,
<&clks IMX6SX_CLK_GPMI_BCH>,
<&clks IMX6SX_CLK_GPMI_BCH_APB>,
<&clks IMX6SX_CLK_PER1_BCH>;
clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
"gpmi_bch_apb", "per1_bch";
dmas = <&dma_apbh 0>;
dma-names = "rx-tx";
status = "disabled";
};
aips1: aips-bus@02000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
spba-bus@02000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x40000>;
ranges;
spdif: spdif@02004000 {
compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif";
reg = <0x02004000 0x4000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 14 18 0>,
<&sdma 15 18 0>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SX_CLK_SPDIF>,
<&clks IMX6SX_CLK_OSC>,
<&clks IMX6SX_CLK_SPDIF>,
<&clks 0>, <&clks 0>, <&clks 0>,
<&clks IMX6SX_CLK_IPG>,
<&clks 0>, <&clks 0>,
<&clks IMX6SX_CLK_SPBA>;
clock-names = "core", "rxtx0",
"rxtx1", "rxtx2",
"rxtx3", "rxtx4",
"rxtx5", "rxtx6",
"rxtx7", "dma";
status = "disabled";
};
ecspi1: ecspi@02008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ECSPI1>,
<&clks IMX6SX_CLK_ECSPI1>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi2: ecspi@0200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ECSPI2>,
<&clks IMX6SX_CLK_ECSPI2>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi3: ecspi@02010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ECSPI3>,
<&clks IMX6SX_CLK_ECSPI3>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi4: ecspi@02014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ECSPI4>,
<&clks IMX6SX_CLK_ECSPI4>;
clock-names = "ipg", "per";
status = "disabled";
};
uart1: serial@02020000 {
compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_UART_IPG>,
<&clks IMX6SX_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
esai: esai@02024000 {
reg = <0x02024000 0x4000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
<&clks IMX6SX_CLK_ESAI_MEM>,
<&clks IMX6SX_CLK_ESAI_EXTAL>,
<&clks IMX6SX_CLK_ESAI_IPG>,
<&clks IMX6SX_CLK_SPBA>;
clock-names = "core", "mem", "extal",
"fsys", "dma";
status = "disabled";
};
ssi1: ssi@02028000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
reg = <0x02028000 0x4000>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_SSI1_IPG>,
<&clks IMX6SX_CLK_SSI1>;
clock-names = "ipg", "baud";
dmas = <&sdma 37 1 0>, <&sdma 38 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
};
ssi2: ssi@0202c000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
reg = <0x0202c000 0x4000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_SSI2_IPG>,
<&clks IMX6SX_CLK_SSI2>;
clock-names = "ipg", "baud";
dmas = <&sdma 41 1 0>, <&sdma 42 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
};
ssi3: ssi@02030000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
reg = <0x02030000 0x4000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_SSI3_IPG>,
<&clks IMX6SX_CLK_SSI3>;
clock-names = "ipg", "baud";
dmas = <&sdma 45 1 0>, <&sdma 46 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
};
asrc: asrc@02034000 {
reg = <0x02034000 0x4000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
<&clks IMX6SX_CLK_ASRC_IPG>,
<&clks IMX6SX_CLK_SPDIF>,
<&clks IMX6SX_CLK_SPBA>;
clock-names = "mem", "ipg", "asrck", "dma";
dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
<&sdma 19 20 1>, <&sdma 20 20 1>,
<&sdma 21 20 1>, <&sdma 22 20 1>;
dma-names = "rxa", "rxb", "rxc",
"txa", "txb", "txc";
status = "okay";
};
};
pwm1: pwm@02080000 {
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_PWM1>,
<&clks IMX6SX_CLK_PWM1>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
};
pwm2: pwm@02084000 {
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_PWM2>,
<&clks IMX6SX_CLK_PWM2>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
};
pwm3: pwm@02088000 {
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_PWM3>,
<&clks IMX6SX_CLK_PWM3>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
};
pwm4: pwm@0208c000 {
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_PWM4>,
<&clks IMX6SX_CLK_PWM4>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
};
flexcan1: can@02090000 {
compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
reg = <0x02090000 0x4000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
<&clks IMX6SX_CLK_CAN1_SERIAL>;
clock-names = "ipg", "per";
status = "disabled";
};
flexcan2: can@02094000 {
compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
reg = <0x02094000 0x4000>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
<&clks IMX6SX_CLK_CAN2_SERIAL>;
clock-names = "ipg", "per";
status = "disabled";
};
gpt: gpt@02098000 {
compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt";
reg = <0x02098000 0x4000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_GPT_BUS>,
<&clks IMX6SX_CLK_GPT_3M>;
clock-names = "ipg", "per";
};
gpio1: gpio@0209c000 {
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
reg = <0x0209c000 0x4000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@020a0000 {
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
reg = <0x020a0000 0x4000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@020a4000 {
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
reg = <0x020a4000 0x4000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@020a8000 {
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
reg = <0x020a8000 0x4000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio5: gpio@020ac000 {
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
reg = <0x020ac000 0x4000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio6: gpio@020b0000 {
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
reg = <0x020b0000 0x4000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio7: gpio@020b4000 {
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
reg = <0x020b4000 0x4000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
kpp: kpp@020b8000 {
compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_DUMMY>;
status = "disabled";
};
wdog1: wdog@020bc000 {
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_DUMMY>;
};
wdog2: wdog@020c0000 {
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_DUMMY>;
status = "disabled";
};
clks: ccm@020c4000 {
compatible = "fsl,imx6sx-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <1>;
clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
};
anatop: anatop@020c8000 {
compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
"syscon", "simple-bus";
reg = <0x020c8000 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
regulator-1p1@110 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1375000>;
regulator-always-on;
anatop-reg-offset = <0x110>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <4>;
anatop-min-voltage = <800000>;
anatop-max-voltage = <1375000>;
};
regulator-3p0@120 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3150000>;
regulator-always-on;
anatop-reg-offset = <0x120>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <0>;
anatop-min-voltage = <2625000>;
anatop-max-voltage = <3400000>;
};
regulator-2p5@130 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2100000>;
regulator-max-microvolt = <2875000>;
regulator-always-on;
anatop-reg-offset = <0x130>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <0>;
anatop-min-voltage = <2100000>;
anatop-max-voltage = <2875000>;
};
reg_arm: regulator-vddcore@140 {
compatible = "fsl,anatop-regulator";
regulator-name = "vddarm";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-always-on;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <0>;
anatop-vol-bit-width = <5>;
anatop-delay-reg-offset = <0x170>;
anatop-delay-bit-shift = <24>;
anatop-delay-bit-width = <2>;
anatop-min-bit-val = <1>;
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
reg_pcie: regulator-vddpcie@140 {
compatible = "fsl,anatop-regulator";
regulator-name = "vddpcie";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <9>;
anatop-vol-bit-width = <5>;
anatop-delay-reg-offset = <0x170>;
anatop-delay-bit-shift = <26>;
anatop-delay-bit-width = <2>;
anatop-min-bit-val = <1>;
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
reg_soc: regulator-vddsoc@140 {
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-always-on;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <18>;
anatop-vol-bit-width = <5>;
anatop-delay-reg-offset = <0x170>;
anatop-delay-bit-shift = <28>;
anatop-delay-bit-width = <2>;
anatop-min-bit-val = <1>;
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
};
tempmon: tempmon {
compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
fsl,tempmon = <&anatop>;
fsl,tempmon-data = <&ocotp>;
clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
};
usbphy1: usbphy@020c9000 {
compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_USBPHY1>;
fsl,anatop = <&anatop>;
};
usbphy2: usbphy@020ca000 {
compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_USBPHY2>;
fsl,anatop = <&anatop>;
};
snvs: snvs@020cc000 {
compatible = "fsl,sec-v4.0-mon", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x020cc000 0x4000>;
snvs-rtc-lp@34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
reg = <0x34 0x58>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
};
epit1: epit@020d0000 {
reg = <0x020d0000 0x4000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
};
epit2: epit@020d4000 {
reg = <0x020d4000 0x4000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
};
src: src@020d8000 {
compatible = "fsl,imx6sx-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
gpc: gpc@020dc000 {
compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
};
iomuxc: iomuxc@020e0000 {
compatible = "fsl,imx6sx-iomuxc";
reg = <0x020e0000 0x4000>;
};
gpr: iomuxc-gpr@020e4000 {
compatible = "fsl,imx6sx-iomuxc-gpr",
"fsl,imx6q-iomuxc-gpr", "syscon";
reg = <0x020e4000 0x4000>;
};
sdma: sdma@020ec000 {
compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_SDMA>,
<&clks IMX6SX_CLK_SDMA>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
/* imx6sx reuses imx6q sdma firmware */
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
};
};
aips2: aips-bus@02100000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
usbotg1: usb@02184000 {
compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_USBOH3>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
fsl,anatop = <&anatop>;
status = "disabled";
};
usbotg2: usb@02184200 {
compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_USBOH3>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
status = "disabled";
};
usbh: usb@02184400 {
compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 2>;
phy_type = "hsic";
fsl,anatop = <&anatop>;
status = "disabled";
};
usbmisc: usbmisc@02184800 {
#index-cells = <1>;
compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc";
reg = <0x02184800 0x200>;
clocks = <&clks IMX6SX_CLK_USBOH3>;
};
fec1: ethernet@02188000 {
compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ENET>,
<&clks IMX6SX_CLK_ENET_AHB>,
<&clks IMX6SX_CLK_ENET_PTP>,
<&clks IMX6SX_CLK_ENET_REF>,
<&clks IMX6SX_CLK_ENET_PTP>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
status = "disabled";
};
mlb: mlb@0218c000 {
reg = <0x0218c000 0x4000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_MLB>;
status = "disabled";
};
usdhc1: usdhc@02190000 {
compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_USDHC1>,
<&clks IMX6SX_CLK_USDHC1>,
<&clks IMX6SX_CLK_USDHC1>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
usdhc2: usdhc@02194000 {
compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_USDHC2>,
<&clks IMX6SX_CLK_USDHC2>,
<&clks IMX6SX_CLK_USDHC2>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
usdhc3: usdhc@02198000 {
compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_USDHC3>,
<&clks IMX6SX_CLK_USDHC3>,
<&clks IMX6SX_CLK_USDHC3>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
usdhc4: usdhc@0219c000 {
compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
reg = <0x0219c000 0x4000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_USDHC4>,
<&clks IMX6SX_CLK_USDHC4>,
<&clks IMX6SX_CLK_USDHC4>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
i2c1: i2c@021a0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
reg = <0x021a0000 0x4000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_I2C1>;
status = "disabled";
};
i2c2: i2c@021a4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
reg = <0x021a4000 0x4000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_I2C2>;
status = "disabled";
};
i2c3: i2c@021a8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
reg = <0x021a8000 0x4000>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_I2C3>;
status = "disabled";
};
mmdc: mmdc@021b0000 {
compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
};
fec2: ethernet@021b4000 {
compatible = "fsl,imx6sx-fec";
reg = <0x021b4000 0x4000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ENET>,
<&clks IMX6SX_CLK_ENET_AHB>,
<&clks IMX6SX_CLK_ENET_PTP>,
<&clks IMX6SX_CLK_ENET2_REF_125M>,
<&clks IMX6SX_CLK_ENET_PTP>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
status = "disabled";
};
weim: weim@021b8000 {
compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
reg = <0x021b8000 0x4000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
};
ocotp: ocotp@021bc000 {
compatible = "fsl,imx6sx-ocotp", "syscon";
reg = <0x021bc000 0x4000>;
clocks = <&clks IMX6SX_CLK_OCOTP>;
};
sai1: sai@021d4000 {
compatible = "fsl,imx6sx-sai";
reg = <0x021d4000 0x4000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_SAI1_IPG>,
<&clks IMX6SX_CLK_SAI1>,
<&clks 0>, <&clks 0>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "rx", "tx";
dmas = <&sdma 31 23 0>, <&sdma 32 23 0>;
dma-source = <&gpr 0 15 0 16>;
status = "disabled";
};
audmux: audmux@021d8000 {
compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux";
reg = <0x021d8000 0x4000>;
status = "disabled";
};
sai2: sai@021dc000 {
compatible = "fsl,imx6sx-sai";
reg = <0x021dc000 0x4000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_SAI2_IPG>,
<&clks IMX6SX_CLK_SAI2>,
<&clks 0>, <&clks 0>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "rx", "tx";
dmas = <&sdma 33 23 0>, <&sdma 34 23 0>;
dma-source = <&gpr 0 17 0 18>;
status = "disabled";
};
qspi1: qspi@021e0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-qspi";
reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_QSPI1>,
<&clks IMX6SX_CLK_QSPI1>;
clock-names = "qspi_en", "qspi";
status = "disabled";
};
qspi2: qspi@021e4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-qspi";
reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_QSPI2>,
<&clks IMX6SX_CLK_QSPI2>;
clock-names = "qspi_en", "qspi";
status = "disabled";
};
uart2: serial@021e8000 {
compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
reg = <0x021e8000 0x4000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_UART_IPG>,
<&clks IMX6SX_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
uart3: serial@021ec000 {
compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
reg = <0x021ec000 0x4000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_UART_IPG>,
<&clks IMX6SX_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
uart4: serial@021f0000 {
compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
reg = <0x021f0000 0x4000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_UART_IPG>,
<&clks IMX6SX_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
uart5: serial@021f4000 {
compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_UART_IPG>,
<&clks IMX6SX_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
i2c4: i2c@021f8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
reg = <0x021f8000 0x4000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_I2C4>;
status = "disabled";
};
};
aips3: aips-bus@02200000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02200000 0x100000>;
ranges;
spba-bus@02200000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02240000 0x40000>;
ranges;
csi1: csi@02214000 {
reg = <0x02214000 0x4000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
<&clks IMX6SX_CLK_CSI>,
<&clks IMX6SX_CLK_DCIC1>;
clock-names = "disp-axi", "csi_mclk", "dcic";
status = "disabled";
};
pxp: pxp@02218000 {
reg = <0x02218000 0x4000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_PXP_AXI>,
<&clks IMX6SX_CLK_DISPLAY_AXI>;
clock-names = "pxp-axi", "disp-axi";
status = "disabled";
};
csi2: csi@0221c000 {
reg = <0x0221c000 0x4000>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
<&clks IMX6SX_CLK_CSI>,
<&clks IMX6SX_CLK_DCIC2>;
clock-names = "disp-axi", "csi_mclk", "dcic";
status = "disabled";
};
lcdif1: lcdif@02220000 {
compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
reg = <0x02220000 0x4000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
<&clks IMX6SX_CLK_LCDIF_APB>,
<&clks IMX6SX_CLK_DISPLAY_AXI>;
clock-names = "pix", "axi", "disp_axi";
status = "disabled";
};
lcdif2: lcdif@02224000 {
compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
reg = <0x02224000 0x4000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
<&clks IMX6SX_CLK_LCDIF_APB>,
<&clks IMX6SX_CLK_DISPLAY_AXI>;
clock-names = "pix", "axi", "disp_axi";
status = "disabled";
};
vadc: vadc@02228000 {
reg = <0x02228000 0x4000>, <0x0222c000 0x4000>;
reg-names = "vadc-vafe", "vadc-vdec";
clocks = <&clks IMX6SX_CLK_VADC>,
<&clks IMX6SX_CLK_CSI>;
clock-names = "vadc", "csi";
status = "disabled";
};
};
adc1: adc@02280000 {
compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
reg = <0x02280000 0x4000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_IPG>;
clock-names = "adc";
status = "disabled";
};
adc2: adc@02284000 {
compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
reg = <0x02284000 0x4000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_IPG>;
clock-names = "adc";
status = "disabled";
};
wdog3: wdog@02288000 {
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x02288000 0x4000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_DUMMY>;
status = "disabled";
};
ecspi5: ecspi@0228c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
reg = <0x0228c000 0x4000>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ECSPI5>,
<&clks IMX6SX_CLK_ECSPI5>;
clock-names = "ipg", "per";
status = "disabled";
};
uart6: serial@022a0000 {
compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
reg = <0x022a0000 0x4000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_UART_IPG>,
<&clks IMX6SX_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
pwm5: pwm@022a4000 {
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
reg = <0x022a4000 0x4000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_PWM5>,
<&clks IMX6SX_CLK_PWM5>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
};
pwm6: pwm@022a8000 {
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
reg = <0x022a8000 0x4000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_PWM6>,
<&clks IMX6SX_CLK_PWM6>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
};
pwm7: pwm@022ac000 {
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
reg = <0x022ac000 0x4000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_PWM7>,
<&clks IMX6SX_CLK_PWM7>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
};
pwm8: pwm@0022b0000 {
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
reg = <0x0022b0000 0x4000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_PWM8>,
<&clks IMX6SX_CLK_PWM8>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
};
};
pcie: pcie@0x08000000 {
compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
reg = <0x08ffc000 0x4000>; /* DBI */
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
/* configuration space */
ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000
/* downstream I/O */
0x81000000 0 0 0x08f80000 0 0x00010000
/* non-prefetchable memory */
0x82000000 0 0x08000000 0x08000000 0 0x00f00000>;
num-lanes = <1>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>,
<&clks IMX6SX_CLK_PCIE_AXI>,
<&clks IMX6SX_CLK_LVDS1_OUT>,
<&clks IMX6SX_CLK_DISPLAY_AXI>;
clock-names = "pcie_ref_125m", "pcie_axi",
"lvds_gate", "display_axi";
status = "disabled";
};
};
};