| /* |
| * Fixed MDIO bus (MDIO bus emulation with fixed PHYs) |
| * |
| * Author: Vitaly Bordug <vbordug@ru.mvista.com> |
| * Anton Vorontsov <avorontsov@ru.mvista.com> |
| * |
| * Copyright (c) 2006-2007 MontaVista Software, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/list.h> |
| #include <linux/mii.h> |
| #include <linux/phy.h> |
| #include <linux/phy_fixed.h> |
| #include <linux/err.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| #include <linux/gpio.h> |
| |
| #define MII_REGS_NUM 29 |
| |
| struct fixed_mdio_bus { |
| struct mii_bus *mii_bus; |
| struct list_head phys; |
| }; |
| |
| struct fixed_phy { |
| int addr; |
| u16 regs[MII_REGS_NUM]; |
| struct phy_device *phydev; |
| struct fixed_phy_status status; |
| int (*link_update)(struct net_device *, struct fixed_phy_status *); |
| struct list_head node; |
| int link_gpio; |
| }; |
| |
| static struct platform_device *pdev; |
| static struct fixed_mdio_bus platform_fmb = { |
| .phys = LIST_HEAD_INIT(platform_fmb.phys), |
| }; |
| |
| static int fixed_phy_update_regs(struct fixed_phy *fp) |
| { |
| u16 bmsr = BMSR_ANEGCAPABLE; |
| u16 bmcr = 0; |
| u16 lpagb = 0; |
| u16 lpa = 0; |
| |
| if (gpio_is_valid(fp->link_gpio)) |
| fp->status.link = !!gpio_get_value_cansleep(fp->link_gpio); |
| |
| if (fp->status.duplex) { |
| switch (fp->status.speed) { |
| case 1000: |
| bmsr |= BMSR_ESTATEN; |
| break; |
| case 100: |
| bmsr |= BMSR_100FULL; |
| break; |
| case 10: |
| bmsr |= BMSR_10FULL; |
| break; |
| default: |
| break; |
| } |
| } else { |
| switch (fp->status.speed) { |
| case 1000: |
| bmsr |= BMSR_ESTATEN; |
| break; |
| case 100: |
| bmsr |= BMSR_100HALF; |
| break; |
| case 10: |
| bmsr |= BMSR_10HALF; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| if (fp->status.link) { |
| bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE; |
| |
| if (fp->status.duplex) { |
| bmcr |= BMCR_FULLDPLX; |
| |
| switch (fp->status.speed) { |
| case 1000: |
| bmcr |= BMCR_SPEED1000; |
| lpagb |= LPA_1000FULL; |
| break; |
| case 100: |
| bmcr |= BMCR_SPEED100; |
| lpa |= LPA_100FULL; |
| break; |
| case 10: |
| lpa |= LPA_10FULL; |
| break; |
| default: |
| pr_warn("fixed phy: unknown speed\n"); |
| return -EINVAL; |
| } |
| } else { |
| switch (fp->status.speed) { |
| case 1000: |
| bmcr |= BMCR_SPEED1000; |
| lpagb |= LPA_1000HALF; |
| break; |
| case 100: |
| bmcr |= BMCR_SPEED100; |
| lpa |= LPA_100HALF; |
| break; |
| case 10: |
| lpa |= LPA_10HALF; |
| break; |
| default: |
| pr_warn("fixed phy: unknown speed\n"); |
| return -EINVAL; |
| } |
| } |
| |
| if (fp->status.pause) |
| lpa |= LPA_PAUSE_CAP; |
| |
| if (fp->status.asym_pause) |
| lpa |= LPA_PAUSE_ASYM; |
| } |
| |
| fp->regs[MII_PHYSID1] = 0; |
| fp->regs[MII_PHYSID2] = 0; |
| |
| fp->regs[MII_BMSR] = bmsr; |
| fp->regs[MII_BMCR] = bmcr; |
| fp->regs[MII_LPA] = lpa; |
| fp->regs[MII_STAT1000] = lpagb; |
| |
| return 0; |
| } |
| |
| static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num) |
| { |
| struct fixed_mdio_bus *fmb = bus->priv; |
| struct fixed_phy *fp; |
| |
| if (reg_num >= MII_REGS_NUM) |
| return -1; |
| |
| /* We do not support emulating Clause 45 over Clause 22 register reads |
| * return an error instead of bogus data. |
| */ |
| switch (reg_num) { |
| case MII_MMD_CTRL: |
| case MII_MMD_DATA: |
| return -1; |
| default: |
| break; |
| } |
| |
| list_for_each_entry(fp, &fmb->phys, node) { |
| if (fp->addr == phy_addr) { |
| /* Issue callback if user registered it. */ |
| if (fp->link_update) { |
| fp->link_update(fp->phydev->attached_dev, |
| &fp->status); |
| fixed_phy_update_regs(fp); |
| } |
| return fp->regs[reg_num]; |
| } |
| } |
| |
| return 0xFFFF; |
| } |
| |
| static int fixed_mdio_write(struct mii_bus *bus, int phy_addr, int reg_num, |
| u16 val) |
| { |
| return 0; |
| } |
| |
| /* |
| * If something weird is required to be done with link/speed, |
| * network driver is able to assign a function to implement this. |
| * May be useful for PHY's that need to be software-driven. |
| */ |
| int fixed_phy_set_link_update(struct phy_device *phydev, |
| int (*link_update)(struct net_device *, |
| struct fixed_phy_status *)) |
| { |
| struct fixed_mdio_bus *fmb = &platform_fmb; |
| struct fixed_phy *fp; |
| |
| if (!phydev || !phydev->mdio.bus) |
| return -EINVAL; |
| |
| list_for_each_entry(fp, &fmb->phys, node) { |
| if (fp->addr == phydev->mdio.addr) { |
| fp->link_update = link_update; |
| fp->phydev = phydev; |
| return 0; |
| } |
| } |
| |
| return -ENOENT; |
| } |
| EXPORT_SYMBOL_GPL(fixed_phy_set_link_update); |
| |
| int fixed_phy_update_state(struct phy_device *phydev, |
| const struct fixed_phy_status *status, |
| const struct fixed_phy_status *changed) |
| { |
| struct fixed_mdio_bus *fmb = &platform_fmb; |
| struct fixed_phy *fp; |
| |
| if (!phydev || phydev->mdio.bus != fmb->mii_bus) |
| return -EINVAL; |
| |
| list_for_each_entry(fp, &fmb->phys, node) { |
| if (fp->addr == phydev->mdio.addr) { |
| #define _UPD(x) if (changed->x) \ |
| fp->status.x = status->x |
| _UPD(link); |
| _UPD(speed); |
| _UPD(duplex); |
| _UPD(pause); |
| _UPD(asym_pause); |
| #undef _UPD |
| fixed_phy_update_regs(fp); |
| return 0; |
| } |
| } |
| |
| return -ENOENT; |
| } |
| EXPORT_SYMBOL(fixed_phy_update_state); |
| |
| int fixed_phy_add(unsigned int irq, int phy_addr, |
| struct fixed_phy_status *status, |
| int link_gpio) |
| { |
| int ret; |
| struct fixed_mdio_bus *fmb = &platform_fmb; |
| struct fixed_phy *fp; |
| |
| fp = kzalloc(sizeof(*fp), GFP_KERNEL); |
| if (!fp) |
| return -ENOMEM; |
| |
| memset(fp->regs, 0xFF, sizeof(fp->regs[0]) * MII_REGS_NUM); |
| |
| fmb->mii_bus->irq[phy_addr] = irq; |
| |
| fp->addr = phy_addr; |
| fp->status = *status; |
| fp->link_gpio = link_gpio; |
| |
| if (gpio_is_valid(fp->link_gpio)) { |
| ret = gpio_request_one(fp->link_gpio, GPIOF_DIR_IN, |
| "fixed-link-gpio-link"); |
| if (ret) |
| goto err_regs; |
| } |
| |
| ret = fixed_phy_update_regs(fp); |
| if (ret) |
| goto err_gpio; |
| |
| list_add_tail(&fp->node, &fmb->phys); |
| |
| return 0; |
| |
| err_gpio: |
| if (gpio_is_valid(fp->link_gpio)) |
| gpio_free(fp->link_gpio); |
| err_regs: |
| kfree(fp); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(fixed_phy_add); |
| |
| static void fixed_phy_del(int phy_addr) |
| { |
| struct fixed_mdio_bus *fmb = &platform_fmb; |
| struct fixed_phy *fp, *tmp; |
| |
| list_for_each_entry_safe(fp, tmp, &fmb->phys, node) { |
| if (fp->addr == phy_addr) { |
| list_del(&fp->node); |
| if (gpio_is_valid(fp->link_gpio)) |
| gpio_free(fp->link_gpio); |
| kfree(fp); |
| return; |
| } |
| } |
| } |
| |
| static int phy_fixed_addr; |
| static DEFINE_SPINLOCK(phy_fixed_addr_lock); |
| |
| struct phy_device *fixed_phy_register(unsigned int irq, |
| struct fixed_phy_status *status, |
| int link_gpio, |
| struct device_node *np) |
| { |
| struct fixed_mdio_bus *fmb = &platform_fmb; |
| struct phy_device *phy; |
| int phy_addr; |
| int ret; |
| |
| /* Get the next available PHY address, up to PHY_MAX_ADDR */ |
| spin_lock(&phy_fixed_addr_lock); |
| if (phy_fixed_addr == PHY_MAX_ADDR) { |
| spin_unlock(&phy_fixed_addr_lock); |
| return ERR_PTR(-ENOSPC); |
| } |
| phy_addr = phy_fixed_addr++; |
| spin_unlock(&phy_fixed_addr_lock); |
| |
| ret = fixed_phy_add(irq, phy_addr, status, link_gpio); |
| if (ret < 0) |
| return ERR_PTR(ret); |
| |
| phy = get_phy_device(fmb->mii_bus, phy_addr, false); |
| if (!phy || IS_ERR(phy)) { |
| fixed_phy_del(phy_addr); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| /* propagate the fixed link values to struct phy_device */ |
| phy->link = status->link; |
| if (status->link) { |
| phy->speed = status->speed; |
| phy->duplex = status->duplex; |
| phy->pause = status->pause; |
| phy->asym_pause = status->asym_pause; |
| } |
| |
| of_node_get(np); |
| phy->mdio.dev.of_node = np; |
| phy->is_pseudo_fixed_link = true; |
| |
| switch (status->speed) { |
| case SPEED_1000: |
| phy->supported = PHY_1000BT_FEATURES; |
| break; |
| case SPEED_100: |
| phy->supported = PHY_100BT_FEATURES; |
| break; |
| case SPEED_10: |
| default: |
| phy->supported = PHY_10BT_FEATURES; |
| } |
| |
| ret = phy_device_register(phy); |
| if (ret) { |
| phy_device_free(phy); |
| of_node_put(np); |
| fixed_phy_del(phy_addr); |
| return ERR_PTR(ret); |
| } |
| |
| return phy; |
| } |
| EXPORT_SYMBOL_GPL(fixed_phy_register); |
| |
| void fixed_phy_unregister(struct phy_device *phy) |
| { |
| phy_device_remove(phy); |
| |
| fixed_phy_del(phy->mdio.addr); |
| } |
| EXPORT_SYMBOL_GPL(fixed_phy_unregister); |
| |
| static int __init fixed_mdio_bus_init(void) |
| { |
| struct fixed_mdio_bus *fmb = &platform_fmb; |
| int ret; |
| |
| pdev = platform_device_register_simple("Fixed MDIO bus", 0, NULL, 0); |
| if (IS_ERR(pdev)) { |
| ret = PTR_ERR(pdev); |
| goto err_pdev; |
| } |
| |
| fmb->mii_bus = mdiobus_alloc(); |
| if (fmb->mii_bus == NULL) { |
| ret = -ENOMEM; |
| goto err_mdiobus_reg; |
| } |
| |
| snprintf(fmb->mii_bus->id, MII_BUS_ID_SIZE, "fixed-0"); |
| fmb->mii_bus->name = "Fixed MDIO Bus"; |
| fmb->mii_bus->priv = fmb; |
| fmb->mii_bus->parent = &pdev->dev; |
| fmb->mii_bus->read = &fixed_mdio_read; |
| fmb->mii_bus->write = &fixed_mdio_write; |
| |
| ret = mdiobus_register(fmb->mii_bus); |
| if (ret) |
| goto err_mdiobus_alloc; |
| |
| return 0; |
| |
| err_mdiobus_alloc: |
| mdiobus_free(fmb->mii_bus); |
| err_mdiobus_reg: |
| platform_device_unregister(pdev); |
| err_pdev: |
| return ret; |
| } |
| module_init(fixed_mdio_bus_init); |
| |
| static void __exit fixed_mdio_bus_exit(void) |
| { |
| struct fixed_mdio_bus *fmb = &platform_fmb; |
| struct fixed_phy *fp, *tmp; |
| |
| mdiobus_unregister(fmb->mii_bus); |
| mdiobus_free(fmb->mii_bus); |
| platform_device_unregister(pdev); |
| |
| list_for_each_entry_safe(fp, tmp, &fmb->phys, node) { |
| list_del(&fp->node); |
| kfree(fp); |
| } |
| } |
| module_exit(fixed_mdio_bus_exit); |
| |
| MODULE_DESCRIPTION("Fixed MDIO bus (MDIO bus emulation with fixed PHYs)"); |
| MODULE_AUTHOR("Vitaly Bordug"); |
| MODULE_LICENSE("GPL"); |