fix typos concerning "initiali[zs]e"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
diff --git a/drivers/crypto/amcc/crypto4xx_reg_def.h b/drivers/crypto/amcc/crypto4xx_reg_def.h
index 7d4edb0..5f5fbc0 100644
--- a/drivers/crypto/amcc/crypto4xx_reg_def.h
+++ b/drivers/crypto/amcc/crypto4xx_reg_def.h
@@ -113,7 +113,7 @@
#define CRYPTO4XX_PRNG_LFSR_H 0x00070034
/**
- * Initilize CRYPTO ENGINE registers, and memory bases.
+ * Initialize CRYPTO ENGINE registers, and memory bases.
*/
#define PPC4XX_PDR_POLL 0x3ff
#define PPC4XX_OUTPUT_THRESHOLD 2
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 278cf5b..308ab320 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -69,7 +69,7 @@
}
/**
- * atc_alloc_descriptor - allocate and return an initilized descriptor
+ * atc_alloc_descriptor - allocate and return an initialized descriptor
* @chan: the channel to allocate descriptors for
* @gfp_flags: GFP allocation flags
*
diff --git a/drivers/gpu/drm/savage/savage_bci.c b/drivers/gpu/drm/savage/savage_bci.c
index 2d0c9ca..fa05cda 100644
--- a/drivers/gpu/drm/savage/savage_bci.c
+++ b/drivers/gpu/drm/savage/savage_bci.c
@@ -552,7 +552,7 @@
/*
- * Initalize mappings. On Savage4 and SavageIX the alignment
+ * Initialize mappings. On Savage4 and SavageIX the alignment
* and size of the aperture is not suitable for automatic MTRR setup
* in drm_addmap. Therefore we add them manually before the maps are
* initialized, and tear them down on last close.
diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c
index c32d83996..27d9fe0 100644
--- a/drivers/ide/ide-gd.c
+++ b/drivers/ide/ide-gd.c
@@ -92,7 +92,7 @@
/*
* On HPA drives the capacity needs to be
- * reinitilized on resume otherwise the disk
+ * reinitialized on resume otherwise the disk
* can not be used and a hard reset is required
*/
static void ide_gd_resume(ide_drive_t *drive)
diff --git a/drivers/infiniband/hw/ehca/hcp_if.h b/drivers/infiniband/hw/ehca/hcp_if.h
index 39c1c36..a46e514 100644
--- a/drivers/infiniband/hw/ehca/hcp_if.h
+++ b/drivers/infiniband/hw/ehca/hcp_if.h
@@ -49,7 +49,7 @@
#include "hipz_hw.h"
/*
- * hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initalize
+ * hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initialize
* resources, create the empty EQPT (ring).
*/
u64 hipz_h_alloc_resource_eq(const struct ipz_adapter_handle adapter_handle,
diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c
index 0fe27ba..c431d09 100644
--- a/drivers/input/misc/ad714x.c
+++ b/drivers/input/misc/ad714x.c
@@ -1118,7 +1118,7 @@
if (error)
goto err_free_mem;
- /* initilize and request sw/hw resources */
+ /* initialize and request sw/hw resources */
ad714x_hw_init(ad714x);
mutex_init(&ad714x->mutex);
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index a109120..78a6eb6 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -4808,7 +4808,7 @@
return -1;
if (init_ov_sensor(ov) >= 0) {
- PDEBUG(1, "OV7xx0 sensor initalized (method 1)");
+ PDEBUG(1, "OV7xx0 sensor initialized (method 1)");
} else {
/* Reset the 76xx */
if (i2c_w(ov, 0x12, 0x80) < 0)
diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h
index 8997add..307e847 100644
--- a/drivers/media/video/zoran/zoran.h
+++ b/drivers/media/video/zoran/zoran.h
@@ -391,7 +391,7 @@
struct mutex resource_lock; /* prevent evil stuff */
- u8 initialized; /* flag if zoran has been correctly initalized */
+ u8 initialized; /* flag if zoran has been correctly initialized */
int user; /* number of current users */
struct card_info card;
struct tvnorm *timing;
diff --git a/drivers/media/video/zoran/zr36050.c b/drivers/media/video/zoran/zr36050.c
index 639dd87..e198560 100644
--- a/drivers/media/video/zoran/zr36050.c
+++ b/drivers/media/video/zoran/zr36050.c
@@ -236,7 +236,7 @@
Could be variable, but until it's not needed it they are just fixed to save
memory. Otherwise expand zr36050 structure with arrays, push the values to
- it and initalize from there, as e.g. the linux zr36057/60 driver does it.
+ it and initialize from there, as e.g. the linux zr36057/60 driver does it.
========================================================================= */
static const char zr36050_dqt[0x86] = {
diff --git a/drivers/media/video/zoran/zr36060.c b/drivers/media/video/zoran/zr36060.c
index 008746f..5e4f57c 100644
--- a/drivers/media/video/zoran/zr36060.c
+++ b/drivers/media/video/zoran/zr36060.c
@@ -227,7 +227,7 @@
Could be variable, but until it's not needed it they are just fixed to save
memory. Otherwise expand zr36060 structure with arrays, push the values to
- it and initalize from there, as e.g. the linux zr36057/60 driver does it.
+ it and initialize from there, as e.g. the linux zr36057/60 driver does it.
========================================================================= */
static const char zr36060_dqt[0x86] = {
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index a6a5701..14d162f 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1794,7 +1794,7 @@
ioc->sh = NULL;
ioc->cached_fw = NULL;
- /* Initilize SCSI Config Data structure
+ /* Initialize SCSI Config Data structure
*/
memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
@@ -2471,7 +2471,7 @@
if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
/*
- * Initalize link list for inactive raid volumes.
+ * Initialize link list for inactive raid volumes.
*/
mutex_init(&ioc->raid_data.inactive_list_mutex);
INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index ca03428..3dfda9c 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1836,7 +1836,7 @@
.pattern = mirror_pattern,
};
-/* initalize driver data structures */
+/* initialize driver data structures */
void denali_drv_init(struct denali_nand_info *denali)
{
denali->idx = 0;
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index 38395df..70705d1 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -729,14 +729,14 @@
* mc32_load_rx_ring - load the ring of receive buffers
* @dev: 3c527 to build the ring for
*
- * This initalises the on-card and driver datastructures to
+ * This initialises the on-card and driver datastructures to
* the point where mc32_start_transceiver() can be called.
*
* The card sets up the receive ring for us. We are required to use the
* ring it provides, although the size of the ring is configurable.
*
* We allocate an sk_buff for each ring entry in turn and
- * initalise its house-keeping info. At the same time, we read
+ * initialise its house-keeping info. At the same time, we read
* each 'next' pointer in our rx_ring array. This reduces slow
* shared-memory reads and makes it easy to access predecessor
* descriptors.
diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c
index 79636ee..0362c8d 100644
--- a/drivers/net/appletalk/ipddp.c
+++ b/drivers/net/appletalk/ipddp.c
@@ -80,7 +80,7 @@
if (version_printed++ == 0)
printk(version);
- /* Initalize the device structure. */
+ /* Initialize the device structure. */
dev->netdev_ops = &ipddp_netdev_ops;
dev->type = ARPHRD_IPDDP; /* IP over DDP tunnel */
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 68e5ac8..dfc787f 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -1071,7 +1071,7 @@
if (lp->mode == 1)
hp100_init_pdls(dev);
- /* Go to performance page and initalize isr and imr registers */
+ /* Go to performance page and initialize isr and imr registers */
hp100_page(PERFORMANCE);
hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 2484e9e..6a45f8f 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1044,7 +1044,7 @@
DBG(dev, "change_mtu(%d)" NL, new_mtu);
if (netif_running(ndev)) {
- /* Check if we really need to reinitalize RX ring */
+ /* Check if we really need to reinitialize RX ring */
if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu))
ret = emac_resize_rx_ring(dev, new_mtu);
}
diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c
index c80ca64..c02ce1a 100644
--- a/drivers/net/ksz884x.c
+++ b/drivers/net/ksz884x.c
@@ -6812,7 +6812,7 @@
static int fast_aging;
/**
- * netdev_init - initalize network device.
+ * netdev_init - initialize network device.
* @dev: Network device.
*
* This function initializes the network device.
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index b59b24d..0ace2a4 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -449,7 +449,7 @@
return (0);
}
-/* Initilize temac */
+/* Initialize temac */
static void temac_device_reset(struct net_device *ndev)
{
struct temac_local *lp = netdev_priv(ndev);
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 29e6c63..0bc4f30 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -589,7 +589,7 @@
db->dm910x_chk_mode = 1; /* Enter the check mode */
}
- /* Initilize DM910X board */
+ /* Initialize DM910X board */
dmfe_init_dm910x(dev);
/* Active System Interface */
@@ -606,9 +606,9 @@
}
-/* Initilize DM910X board
+/* Initialize DM910X board
* Reset DM910X board
- * Initilize TX/Rx descriptor chain structure
+ * Initialize TX/Rx descriptor chain structure
* Send the set-up frame
* Enable Tx/Rx machine
*/
@@ -649,7 +649,7 @@
if ( !(db->media_mode & DMFE_AUTO) )
db->op_mode = db->media_mode; /* Force Mode */
- /* Initiliaze Transmit/Receive decriptor and CR3/4 */
+ /* Initialize Transmit/Receive decriptor and CR3/4 */
dmfe_descriptor_init(db, ioaddr);
/* Init CR6 to program DM910x operation */
@@ -1288,7 +1288,7 @@
* Stop DM910X board
* Free Tx/Rx allocated memory
* Reset DM910X board
- * Re-initilize DM910X board
+ * Re-initialize DM910X board
*/
static void dmfe_dynamic_reset(struct DEVICE *dev)
@@ -1316,7 +1316,7 @@
netif_carrier_off(dev);
db->wait_reset = 0;
- /* Re-initilize DM910X board */
+ /* Re-initialize DM910X board */
dmfe_init_dm910x(dev);
/* Restart upper layer interface */
@@ -1447,7 +1447,7 @@
/*
* Send a setup frame for DM9132
- * This setup frame initilize DM910X address filter mode
+ * This setup frame initialize DM910X address filter mode
*/
static void dm9132_id_table(struct DEVICE *dev)
@@ -1489,7 +1489,7 @@
/*
* Send a setup frame for DM9102/DM9102A
- * This setup frame initilize DM910X address filter mode
+ * This setup frame initialize DM910X address filter mode
*/
static void send_filter_frame(struct DEVICE *dev)
@@ -2142,7 +2142,7 @@
pci_set_power_state(pci_dev, PCI_D0);
pci_restore_state(pci_dev);
- /* Re-initilize DM910X board */
+ /* Re-initialize DM910X board */
dmfe_init_dm910x(dev);
/* Disable WOL */
@@ -2196,7 +2196,7 @@
/* Description:
* when user used insmod to add module, system invoked init_module()
- * to initilize and register.
+ * to initialize and register.
*/
static int __init dmfe_init_module(void)
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index d86e8f3..7f48e04 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -50,7 +50,7 @@
*
* ROADMAP
*
- * i2400m_dev_initalize() Called by i2400m_dev_start()
+ * i2400m_dev_initialize() Called by i2400m_dev_start()
* i2400m_set_init_config()
* i2400m_cmd_get_state()
* i2400m_dev_shutdown() Called by i2400m_dev_stop()
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index f511e70..75a80e46b 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -1241,10 +1241,10 @@
};
/**
- * ccio_ioc_init - Initalize the I/O Controller
+ * ccio_ioc_init - Initialize the I/O Controller
* @ioc: The I/O Controller.
*
- * Initalize the I/O Controller which includes setting up the
+ * Initialize the I/O Controller which includes setting up the
* I/O Page Directory, the resource map, and initalizing the
* U2/Uturn chip into virtual mode.
*/
diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c
index fa28d89..0c62fe3 100644
--- a/drivers/pcmcia/sa11xx_base.c
+++ b/drivers/pcmcia/sa11xx_base.c
@@ -231,7 +231,7 @@
sinfo->nskt = nr;
- /* Initiliaze processor specific parameters */
+ /* Initialize processor specific parameters */
for (i = 0; i < nr; i++) {
skt = &sinfo->skt[i];
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 7f87979..0ec3da6 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -9717,7 +9717,7 @@
asc_dvc->bug_fix_cntl = 0;
asc_dvc->pci_fix_asyn_xfer = 0;
asc_dvc->pci_fix_asyn_xfer_always = 0;
- /* asc_dvc->init_state initalized in AscInitGetConfig(). */
+ /* asc_dvc->init_state initialized in AscInitGetConfig(). */
asc_dvc->sdtr_done = 0;
asc_dvc->cur_total_qng = 0;
asc_dvc->is_in_int = 0;
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c
index d01dcc6..7437461 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.c
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c
@@ -588,7 +588,7 @@
* asd_init_cseq_scratch -- setup and init CSEQ
* @asd_ha: pointer to host adapter structure
*
- * Setup and initialize Central sequencers. Initialiaze the mode
+ * Setup and initialize Central sequencers. Initialize the mode
* independent and dependent scratch page to the default settings.
*/
static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha)
@@ -782,7 +782,7 @@
asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0);
/*
* Set the desired interval between transmissions of the NOTIFY
- * (ENABLE SPINUP) primitive. Must be initilized to val - 1.
+ * (ENABLE SPINUP) primitive. Must be initialized to val - 1.
*/
asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq),
ASD_NOTIFY_TIMEOUT - 1);
diff --git a/drivers/scsi/bfa/vport.c b/drivers/scsi/bfa/vport.c
index 27cd619..e2720c8 100644
--- a/drivers/scsi/bfa/vport.c
+++ b/drivers/scsi/bfa/vport.c
@@ -789,7 +789,7 @@
switch (status) {
case BFA_STATUS_OK:
/*
- * Initialiaze the V-Port fields
+ * Initialize the V-Port fields
*/
__vport_fcid(vport) = bfa_lps_get_pid(vport->lps);
vport->vport_stats.fdisc_accepts++;
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 0e05e8a..e81efac 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1082,7 +1082,7 @@
}
/**
- * pm8001_chip_iounmap - which maped when initilized.
+ * pm8001_chip_iounmap - which maped when initialized.
* @pm8001_ha: our hba card information
*/
static void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 5510df8..cd30432 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -183,7 +183,7 @@
**/
static int qla4xxx_init_local_data(struct scsi_qla_host *ha)
{
- /* Initilize aen queue */
+ /* Initialize aen queue */
ha->aen_q_count = MAX_AEN_ENTRIES;
return qla4xxx_get_firmware_status(ha);
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index 9794e0c..7e5e5ef 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -470,7 +470,7 @@
}
if (port->sc_port.state) {
- /* The serial_core stuffs are initilized, use them */
+ /* The serial_core stuffs are initialized, use them */
tty = port->sc_port.state->port.tty;
}
else {
@@ -551,11 +551,11 @@
BUG_ON(!port->sc_is_asynch);
if (port->sc_port.state) {
- /* We're initilized, using serial core infrastructure */
+ /* We're initialized, using serial core infrastructure */
xmit = &port->sc_port.state->xmit;
} else {
/* Probably sn_sal_switch_to_asynch has been run but serial core isn't
- * initilized yet. Just return. Writes are going through
+ * initialized yet. Just return. Writes are going through
* sn_sal_console_write (due to register_console) at this time.
*/
return;
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 8942ae4..e727168 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -2087,7 +2087,7 @@
if (ret < 0)
return ret;
- /* initalise the buffer */
+ /* initialise the buffer */
for (i = 0; i < this_usbduxsub->sizePwmBuf; i++)
((char *)(this_usbduxsub->urbPwm->transfer_buffer))[i] = 0;
diff --git a/drivers/staging/octeon/cvmx-cmd-queue.c b/drivers/staging/octeon/cvmx-cmd-queue.c
index 976227b..e9809d3 100644
--- a/drivers/staging/octeon/cvmx-cmd-queue.c
+++ b/drivers/staging/octeon/cvmx-cmd-queue.c
@@ -140,21 +140,21 @@
if (qstate->base_ptr_div128) {
if (max_depth != (int)qstate->max_depth) {
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
- "Queue already initalized with different "
+ "Queue already initialized with different "
"max_depth (%d).\n",
(int)qstate->max_depth);
return CVMX_CMD_QUEUE_INVALID_PARAM;
}
if (fpa_pool != qstate->fpa_pool) {
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
- "Queue already initalized with different "
+ "Queue already initialized with different "
"FPA pool (%u).\n",
qstate->fpa_pool);
return CVMX_CMD_QUEUE_INVALID_PARAM;
}
if ((pool_size >> 3) - 1 != qstate->pool_size_m1) {
cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
- "Queue already initalized with different "
+ "Queue already initialized with different "
"FPA pool size (%u).\n",
(qstate->pool_size_m1 + 1) << 3);
return CVMX_CMD_QUEUE_INVALID_PARAM;
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index 6327552..fe8b093 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -848,7 +848,7 @@
}
/*
- * ->alloc_inode() callback. Allocates inode and initilizes private data.
+ * ->alloc_inode() callback. Allocates inode and initializes private data.
*/
static struct inode *pohmelfs_alloc_inode(struct super_block *sb)
{
diff --git a/drivers/staging/rt2860/common/cmm_wpa.c b/drivers/staging/rt2860/common/cmm_wpa.c
index 94e119f..e1ead76 100644
--- a/drivers/staging/rt2860/common/cmm_wpa.c
+++ b/drivers/staging/rt2860/common/cmm_wpa.c
@@ -427,7 +427,7 @@
/*
==========================================================================
Description:
- This is a function to initilize 4-way handshake
+ This is a function to initialize 4-way handshake
Return:
@@ -867,7 +867,7 @@
==========================================================================
Description:
When receiving the last packet of 4-way pairwisekey handshake.
- Initilize 2-way groupkey handshake following.
+ Initialize 2-way groupkey handshake following.
Return:
==========================================================================
*/
diff --git a/drivers/staging/rtl8192e/r8190_rtl8256.c b/drivers/staging/rtl8192e/r8190_rtl8256.c
index 1bd054d..eff47f9 100644
--- a/drivers/staging/rtl8192e/r8190_rtl8256.c
+++ b/drivers/staging/rtl8192e/r8190_rtl8256.c
@@ -501,13 +501,13 @@
if((priv->ieee80211->eRFPowerState == eRfOff) && RT_IN_PS_LEVEL(pPSC, RT_RF_OFF_LEVL_HALT_NIC))
{ // The current RF state is OFF and the RF OFF level is halting the NIC, re-initialize the NIC.
bool rtstatus = true;
- u32 InitilizeCount = 3;
+ u32 InitializeCount = 3;
do
{
- InitilizeCount--;
+ InitializeCount--;
priv->RegRfOff = false;
rtstatus = NicIFEnableNIC(dev);
- }while( (rtstatus != true) &&(InitilizeCount >0) );
+ }while( (rtstatus != true) &&(InitializeCount >0) );
if(rtstatus != true)
{
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index cdbe8bf..e8a65ce 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -261,7 +261,7 @@
spin_lock_init(&priv->lock);
- /* priv->termios is left uninitalized until port opening */
+ /* priv->termios is left uninitialized until port opening */
init_waitqueue_head(&serial->port[i]->write_wait);
}
diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c
index eab86e4..2054d4e 100644
--- a/drivers/usb/wusbcore/wusbhc.c
+++ b/drivers/usb/wusbcore/wusbhc.c
@@ -26,7 +26,7 @@
* the one that requires (phase B, wusbhc_b_{create,destroy}).
*
* This is so because usb_add_hcd() will start the HC, and thus, all
- * the HC specific stuff has to be already initialiazed (like sysfs
+ * the HC specific stuff has to be already initialized (like sysfs
* thingies).
*/
#include <linux/device.h>
diff --git a/drivers/uwb/wlp/wss-lc.c b/drivers/uwb/wlp/wss-lc.c
index 90accdd..a005d2a 100644
--- a/drivers/uwb/wlp/wss-lc.c
+++ b/drivers/uwb/wlp/wss-lc.c
@@ -180,7 +180,7 @@
* If memory was allocated for the kobject's name then it will
* be freed by the kobject system during this time.
*
- * The EDA cache is removed and reinitilized when the WSS is removed. We
+ * The EDA cache is removed and reinitialized when the WSS is removed. We
* thus loose knowledge of members of this WSS at that time and need not do
* it here.
*/
diff --git a/drivers/video/carminefb.c b/drivers/video/carminefb.c
index d8345fc..6b19136 100644
--- a/drivers/video/carminefb.c
+++ b/drivers/video/carminefb.c
@@ -432,7 +432,7 @@
u32 loops;
u32 ret;
- /* Initalize Carmine */
+ /* Initialize Carmine */
/* Sets internal clock */
c_set_hw_reg(hw, CARMINE_CTL_REG + CARMINE_CTL_REG_CLOCK_ENABLE,
CARMINE_DFLT_IP_CLOCK_ENABLE);
diff --git a/drivers/video/tgafb.c b/drivers/video/tgafb.c
index 1b3b1c7..aba7686 100644
--- a/drivers/video/tgafb.c
+++ b/drivers/video/tgafb.c
@@ -305,7 +305,7 @@
TGA_WRITE_REG(par, htimings, TGA_HORIZ_REG);
TGA_WRITE_REG(par, vtimings, TGA_VERT_REG);
- /* Initalise RAMDAC. */
+ /* Initialise RAMDAC. */
if (tga_type == TGA_TYPE_8PLANE && tga_bus_pci) {
/* Init BT485 RAMDAC registers. */