| config QCOM_GDSC |
| bool |
| select PM_GENERIC_DOMAINS if PM |
| depends on REGULATOR |
| |
| config COMMON_CLK_QCOM |
| tristate "Support for Qualcomm's clock controllers" |
| depends on OF |
| depends on ARCH_QCOM || COMPILE_TEST |
| select REGMAP_MMIO |
| select RESET_CONTROLLER |
| |
| config APQ_GCC_8084 |
| tristate "APQ8084 Global Clock Controller" |
| select QCOM_GDSC |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the global clock controller on apq8084 devices. |
| Say Y if you want to use peripheral devices such as UART, SPI, |
| i2c, USB, SD/eMMC, SATA, PCIe, etc. |
| |
| config APQ_MMCC_8084 |
| tristate "APQ8084 Multimedia Clock Controller" |
| select APQ_GCC_8084 |
| select QCOM_GDSC |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the multimedia clock controller on apq8084 devices. |
| Say Y if you want to support multimedia devices such as display, |
| graphics, video encode/decode, camera, etc. |
| |
| config IPQ_GCC_4019 |
| tristate "IPQ4019 Global Clock Controller" |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the global clock controller on ipq4019 devices. |
| Say Y if you want to use peripheral devices such as UART, SPI, |
| i2c, USB, SD/eMMC, etc. |
| |
| config IPQ_GCC_806X |
| tristate "IPQ806x Global Clock Controller" |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the global clock controller on ipq806x devices. |
| Say Y if you want to use peripheral devices such as UART, SPI, |
| i2c, USB, SD/eMMC, etc. |
| |
| config IPQ_LCC_806X |
| tristate "IPQ806x LPASS Clock Controller" |
| select IPQ_GCC_806X |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the LPASS clock controller on ipq806x devices. |
| Say Y if you want to use audio devices such as i2s, pcm, |
| S/PDIF, etc. |
| |
| config MSM_GCC_8660 |
| tristate "MSM8660 Global Clock Controller" |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the global clock controller on msm8660 devices. |
| Say Y if you want to use peripheral devices such as UART, SPI, |
| i2c, USB, SD/eMMC, etc. |
| |
| config MSM_GCC_8916 |
| tristate "MSM8916 Global Clock Controller" |
| select QCOM_GDSC |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the global clock controller on msm8916 devices. |
| Say Y if you want to use devices such as UART, SPI i2c, USB, |
| SD/eMMC, display, graphics, camera etc. |
| |
| config MSM_GCC_8960 |
| tristate "APQ8064/MSM8960 Global Clock Controller" |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the global clock controller on apq8064/msm8960 devices. |
| Say Y if you want to use peripheral devices such as UART, SPI, |
| i2c, USB, SD/eMMC, SATA, PCIe, etc. |
| |
| config MSM_LCC_8960 |
| tristate "APQ8064/MSM8960 LPASS Clock Controller" |
| select MSM_GCC_8960 |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the LPASS clock controller on apq8064/msm8960 devices. |
| Say Y if you want to use audio devices such as i2s, pcm, |
| SLIMBus, etc. |
| |
| config MDM_GCC_9615 |
| tristate "MDM9615 Global Clock Controller" |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the global clock controller on mdm9615 devices. |
| Say Y if you want to use peripheral devices such as UART, SPI, |
| i2c, USB, SD/eMMC, etc. |
| |
| config MDM_LCC_9615 |
| tristate "MDM9615 LPASS Clock Controller" |
| select MDM_GCC_9615 |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the LPASS clock controller on mdm9615 devices. |
| Say Y if you want to use audio devices such as i2s, pcm, |
| SLIMBus, etc. |
| |
| config MSM_MMCC_8960 |
| tristate "MSM8960 Multimedia Clock Controller" |
| select MSM_GCC_8960 |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the multimedia clock controller on msm8960 devices. |
| Say Y if you want to support multimedia devices such as display, |
| graphics, video encode/decode, camera, etc. |
| |
| config MSM_GCC_8974 |
| tristate "MSM8974 Global Clock Controller" |
| select QCOM_GDSC |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the global clock controller on msm8974 devices. |
| Say Y if you want to use peripheral devices such as UART, SPI, |
| i2c, USB, SD/eMMC, SATA, PCIe, etc. |
| |
| config MSM_MMCC_8974 |
| tristate "MSM8974 Multimedia Clock Controller" |
| select MSM_GCC_8974 |
| select QCOM_GDSC |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the multimedia clock controller on msm8974 devices. |
| Say Y if you want to support multimedia devices such as display, |
| graphics, video encode/decode, camera, etc. |
| |
| config MSM_GCC_8996 |
| tristate "MSM8996 Global Clock Controller" |
| select QCOM_GDSC |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the global clock controller on msm8996 devices. |
| Say Y if you want to use peripheral devices such as UART, SPI, |
| i2c, USB, UFS, SD/eMMC, PCIe, etc. |
| |
| config MSM_MMCC_8996 |
| tristate "MSM8996 Multimedia Clock Controller" |
| select MSM_GCC_8996 |
| select QCOM_GDSC |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the multimedia clock controller on msm8996 devices. |
| Say Y if you want to support multimedia devices such as display, |
| graphics, video encode/decode, camera, etc. |
| |
| config MSM_GCC_SDM845 |
| tristate "SDM845 Global Clock Controller" |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the global clock controller on Qualcomm Technologies, Inc |
| sdm845 devices. |
| Say Y if you want to use peripheral devices such as UART, SPI, |
| i2c, USB, UFS, SD/eMMC, PCIe, etc. |
| |
| config MSM_VIDEOCC_SDM845 |
| tristate "SDM845 Video Clock Controller" |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the video clock controller on Qualcomm Technologies, Inc |
| sdm845 devices. |
| Say Y if you want to support video devices and functionality such as |
| video encode/decode. |
| |
| config MSM_CAMCC_SDM845 |
| tristate "SDM845 Camera Clock Controller" |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the camera clock controller on Qualcomm Technologies, Inc |
| sdm845 devices. |
| Say Y if you want to support camera devices and functionality such as |
| capturing pictures. |
| |
| config MSM_DISPCC_SDM845 |
| tristate "SDM845 Display Clock Controller" |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the display clock controller on Qualcomm Technologies, Inc |
| sdm845 devices. |
| Say Y if you want to support display devices and functionality such as |
| splash screen. |
| |
| config CLOCK_QPNP_DIV |
| tristate "QPNP PMIC clkdiv driver" |
| depends on COMMON_CLK_QCOM && SPMI |
| help |
| This driver supports the clkdiv functionality on the Qualcomm |
| Technologies, Inc. QPNP PMIC. It configures the frequency of |
| clkdiv outputs on the PMIC. These clocks are typically wired |
| through alternate functions on gpio pins. |
| |
| config MSM_CLK_RPMH |
| tristate "RPMh Clock Driver" |
| depends on COMMON_CLK_QCOM && QTI_RPMH_API |
| help |
| RPMh manages shared resources on some Qualcomm Technologies, Inc. |
| SoCs. It accepts requests from other hardware subsystems via RSC. |
| Say Y to support the clocks managed by RPMh VRM/ARC on platforms |
| such as sdm845. |
| |
| config CLOCK_CPU_OSM |
| tristate "OSM CPU Clock Controller" |
| depends on COMMON_CLK_QCOM |
| help |
| Support for the OSM clock controller. |
| Operating State Manager (OSM) is a hardware engine used by some |
| Qualcomm Technologies, Inc. (QTI) SoCs to manage frequency and |
| voltage scaling in hardware. OSM is capable of controlling |
| frequency and voltage requests for multiple clusters via the |
| existence of multiple OSM domains. |
| Say Y if you want to support OSM clocks. |
| |
| config MSM_GPUCC_SDM845 |
| tristate "SDM845 Graphics Clock Controller" |
| depends on MSM_GCC_SDM845 |
| help |
| Support for the graphics clock controller on Qualcomm Technologies, Inc. |
| sdm845 devices. |
| Say Y if you want to support graphics controller devices. |
| |
| config MSM_CLK_AOP_QMP |
| tristate "AOP QMP Clock Driver" |
| depends on COMMON_CLK_QCOM && MSM_QMP |
| help |
| Always On Processor manages few shared clocks on some Qualcomm |
| Technologies, Inc. SoCs. It accepts requests from other hardware |
| subsystems via QMP mailboxes. |
| Say Y to support the clocks managed by AOP on platforms such as sdm845. |
| |
| source "drivers/clk/qcom/mdss/Kconfig" |