blob: 73199de2e37fedb582c6a560f4277cda7c8de640 [file] [log] [blame]
/*
* Roccat Kone driver for Linux
*
* Copyright (c) 2010 Stefan Achatz <erazor_de@users.sourceforge.net>
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
/*
* Roccat Kone is a gamer mouse which consists of a mouse part and a keyboard
* part. The keyboard part enables the mouse to execute stored macros with mixed
* key- and button-events.
*
* TODO implement on-the-fly polling-rate change
* The windows driver has the ability to change the polling rate of the
* device on the press of a mousebutton.
* Is it possible to remove and reinstall the urb in raw-event- or any
* other handler, or to defer this action to be executed somewhere else?
*
* TODO is it possible to overwrite group for sysfs attributes via udev?
*/
#include <linux/device.h>
#include <linux/input.h>
#include <linux/hid.h>
#include <linux/usb.h>
#include <linux/module.h>
#include <linux/slab.h>
#include "hid-ids.h"
#include "hid-roccat.h"
#include "hid-roccat-kone.h"
static void kone_set_settings_checksum(struct kone_settings *settings)
{
uint16_t checksum = 0;
unsigned char *address = (unsigned char *)settings;
int i;
for (i = 0; i < sizeof(struct kone_settings) - 2; ++i, ++address)
checksum += *address;
settings->checksum = cpu_to_le16(checksum);
}
/*
* Checks success after writing data to mouse
* On success returns 0
* On failure returns errno
*/
static int kone_check_write(struct usb_device *usb_dev)
{
int len;
unsigned char *data;
data = kmalloc(1, GFP_KERNEL);
if (!data)
return -ENOMEM;
do {
/*
* Mouse needs 50 msecs until it says ok, but there are
* 30 more msecs needed for next write to work.
*/
msleep(80);
len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
USB_REQ_CLEAR_FEATURE,
USB_TYPE_CLASS | USB_RECIP_INTERFACE |
USB_DIR_IN,
kone_command_confirm_write, 0, data, 1,
USB_CTRL_SET_TIMEOUT);
if (len != 1) {
kfree(data);
return -EIO;
}
/*
* value of 3 seems to mean something like
* "not finished yet, but it looks good"
* So check again after a moment.
*/
} while (*data == 3);
if (*data == 1) { /* everything alright */
kfree(data);
return 0;
} else { /* unknown answer */
hid_err(usb_dev, "got retval %d when checking write\n", *data);
kfree(data);
return -EIO;
}
}
/*
* Reads settings from mouse and stores it in @buf
* @buf has to be alloced with GFP_KERNEL
* On success returns 0
* On failure returns errno
*/
static int kone_get_settings(struct usb_device *usb_dev,
struct kone_settings *buf)
{
int len;
len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
USB_REQ_CLEAR_FEATURE,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
kone_command_settings, 0, buf,
sizeof(struct kone_settings), USB_CTRL_SET_TIMEOUT);
if (len != sizeof(struct kone_settings))
return -EIO;
return 0;
}
/*
* Writes settings from @buf to mouse
* On success returns 0
* On failure returns errno
*/
static int kone_set_settings(struct usb_device *usb_dev,
struct kone_settings const *settings)
{
int len;
len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
USB_REQ_SET_CONFIGURATION,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
kone_command_settings, 0, (char *)settings,
sizeof(struct kone_settings),
USB_CTRL_SET_TIMEOUT);
if (len != sizeof(struct kone_settings))
return -EIO;
if (kone_check_write(usb_dev))
return -EIO;
return 0;
}
/*
* Reads profile data from mouse and stores it in @buf
* @number: profile number to read
* On success returns 0
* On failure returns errno
*/
static int kone_get_profile(struct usb_device *usb_dev,
struct kone_profile *buf, int number)
{
int len;
if (number < 1 || number > 5)
return -EINVAL;
len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
USB_REQ_CLEAR_FEATURE,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
kone_command_profile, number, buf,
sizeof(struct kone_profile), USB_CTRL_SET_TIMEOUT);
if (len != sizeof(struct kone_profile))
return -EIO;
return 0;
}
/*
* Writes profile data to mouse.
* @number: profile number to write
* On success returns 0
* On failure returns errno
*/
static int kone_set_profile(struct usb_device *usb_dev,
struct kone_profile const *profile, int number)
{
int len;
if (number < 1 || number > 5)
return -EINVAL;
len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
USB_REQ_SET_CONFIGURATION,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
kone_command_profile, number, (char *)profile,
sizeof(struct kone_profile),
USB_CTRL_SET_TIMEOUT);
if (len != sizeof(struct kone_profile))
return len;
if (kone_check_write(usb_dev))
return -EIO;
return 0;
}
/*
* Reads value of "fast-clip-weight" and stores it in @result
* On success returns 0
* On failure returns errno
*/
static int kone_get_weight(struct usb_device *usb_dev, int *result)
{
int len;
uint8_t *data;
data = kmalloc(1, GFP_KERNEL);
if (!data)
return -ENOMEM;
len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
USB_REQ_CLEAR_FEATURE,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
kone_command_weight, 0, data, 1, USB_CTRL_SET_TIMEOUT);
if (len != 1) {
kfree(data);
return -EIO;
}
*result = (int)*data;
kfree(data);
return 0;
}
/*
* Reads firmware_version of mouse and stores it in @result
* On success returns 0
* On failure returns errno
*/
static int kone_get_firmware_version(struct usb_device *usb_dev, int *result)
{
int len;
unsigned char *data;
data = kmalloc(2, GFP_KERNEL);
if (!data)
return -ENOMEM;
len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
USB_REQ_CLEAR_FEATURE,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
kone_command_firmware_version, 0, data, 2,
USB_CTRL_SET_TIMEOUT);
if (len != 2) {
kfree(data);
return -EIO;
}
*result = le16_to_cpu(*data);
kfree(data);
return 0;
}
static ssize_t kone_sysfs_read_settings(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
struct device *dev = container_of(kobj, struct device, kobj);
struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
if (off >= sizeof(struct kone_settings))
return 0;
if (off + count > sizeof(struct kone_settings))
count = sizeof(struct kone_settings) - off;
mutex_lock(&kone->kone_lock);
memcpy(buf, ((char const *)&kone->settings) + off, count);
mutex_unlock(&kone->kone_lock);
return count;
}
/*
* Writing settings automatically activates startup_profile.
* This function keeps values in kone_device up to date and assumes that in
* case of error the old data is still valid
*/
static ssize_t kone_sysfs_write_settings(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
struct device *dev = container_of(kobj, struct device, kobj);
struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
int retval = 0, difference;
/* I need to get my data in one piece */
if (off != 0 || count != sizeof(struct kone_settings))
return -EINVAL;
mutex_lock(&kone->kone_lock);
difference = memcmp(buf, &kone->settings, sizeof(struct kone_settings));
if (difference) {
retval = kone_set_settings(usb_dev,
(struct kone_settings const *)buf);
if (!retval)
memcpy(&kone->settings, buf,
sizeof(struct kone_settings));
}
mutex_unlock(&kone->kone_lock);
if (retval)
return retval;
/*
* If we get here, treat settings as okay and update actual values
* according to startup_profile
*/
kone->actual_profile = kone->settings.startup_profile;
kone->actual_dpi = kone->profiles[kone->actual_profile - 1].startup_dpi;
return sizeof(struct kone_settings);
}
static ssize_t kone_sysfs_read_profilex(struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count, int number) {
struct device *dev = container_of(kobj, struct device, kobj);
struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
if (off >= sizeof(struct kone_profile))
return 0;
if (off + count > sizeof(struct kone_profile))
count = sizeof(struct kone_profile) - off;
mutex_lock(&kone->kone_lock);
memcpy(buf, ((char const *)&kone->profiles[number - 1]) + off, count);
mutex_unlock(&kone->kone_lock);
return count;
}
static ssize_t kone_sysfs_read_profile1(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 1);
}
static ssize_t kone_sysfs_read_profile2(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 2);
}
static ssize_t kone_sysfs_read_profile3(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 3);
}
static ssize_t kone_sysfs_read_profile4(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 4);
}
static ssize_t kone_sysfs_read_profile5(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 5);
}
/* Writes data only if different to stored data */
static ssize_t kone_sysfs_write_profilex(struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count, int number) {
struct device *dev = container_of(kobj, struct device, kobj);
struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
struct kone_profile *profile;
int retval = 0, difference;
/* I need to get my data in one piece */
if (off != 0 || count != sizeof(struct kone_profile))
return -EINVAL;
profile = &kone->profiles[number - 1];
mutex_lock(&kone->kone_lock);
difference = memcmp(buf, profile, sizeof(struct kone_profile));
if (difference) {
retval = kone_set_profile(usb_dev,
(struct kone_profile const *)buf, number);
if (!retval)
memcpy(profile, buf, sizeof(struct kone_profile));
}
mutex_unlock(&kone->kone_lock);
if (retval)
return retval;
return sizeof(struct kone_profile);
}
static ssize_t kone_sysfs_write_profile1(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 1);
}
static ssize_t kone_sysfs_write_profile2(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 2);
}
static ssize_t kone_sysfs_write_profile3(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 3);
}
static ssize_t kone_sysfs_write_profile4(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 4);
}
static ssize_t kone_sysfs_write_profile5(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 5);
}
static ssize_t kone_sysfs_show_actual_profile(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
return snprintf(buf, PAGE_SIZE, "%d\n", kone->actual_profile);
}
static ssize_t kone_sysfs_show_actual_dpi(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
return snprintf(buf, PAGE_SIZE, "%d\n", kone->actual_dpi);
}
/* weight is read each time, since we don't get informed when it's changed */
static ssize_t kone_sysfs_show_weight(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
int weight = 0;
int retval;
mutex_lock(&kone->kone_lock);
retval = kone_get_weight(usb_dev, &weight);
mutex_unlock(&kone->kone_lock);
if (retval)
return retval;
return snprintf(buf, PAGE_SIZE, "%d\n", weight);
}
static ssize_t kone_sysfs_show_firmware_version(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
return snprintf(buf, PAGE_SIZE, "%d\n", kone->firmware_version);
}
static ssize_t kone_sysfs_show_tcu(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
return snprintf(buf, PAGE_SIZE, "%d\n", kone->settings.tcu);
}
static int kone_tcu_command(struct usb_device *usb_dev, int number)
{
int len;
char *value;
value = kmalloc(1, GFP_KERNEL);
if (!value)
return -ENOMEM;
*value = number;
len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
USB_REQ_SET_CONFIGURATION,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
kone_command_calibrate, 0, value, 1,
USB_CTRL_SET_TIMEOUT);
kfree(value);
return ((len != 1) ? -EIO : 0);
}
/*
* Calibrating the tcu is the only action that changes settings data inside the
* mouse, so this data needs to be reread
*/
static ssize_t kone_sysfs_set_tcu(struct device *dev,
struct device_attribute *attr, char const *buf, size_t size)
{
struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
int retval;
unsigned long state;
retval = strict_strtoul(buf, 10, &state);
if (retval)
return retval;
if (state != 0 && state != 1)
return -EINVAL;
mutex_lock(&kone->kone_lock);
if (state == 1) { /* state activate */
retval = kone_tcu_command(usb_dev, 1);
if (retval)
goto exit_unlock;
retval = kone_tcu_command(usb_dev, 2);
if (retval)
goto exit_unlock;
ssleep(5); /* tcu needs this time for calibration */
retval = kone_tcu_command(usb_dev, 3);
if (retval)
goto exit_unlock;
retval = kone_tcu_command(usb_dev, 0);
if (retval)
goto exit_unlock;
retval = kone_tcu_command(usb_dev, 4);
if (retval)
goto exit_unlock;
/*
* Kone needs this time to settle things.
* Reading settings too early will result in invalid data.
* Roccat's driver waits 1 sec, maybe this time could be
* shortened.
*/
ssleep(1);
}
/* calibration changes values in settings, so reread */
retval = kone_get_settings(usb_dev, &kone->settings);
if (retval)
goto exit_no_settings;
/* only write settings back if activation state is different */
if (kone->settings.tcu != state) {
kone->settings.tcu = state;
kone_set_settings_checksum(&kone->settings);
retval = kone_set_settings(usb_dev, &kone->settings);
if (retval) {
hid_err(usb_dev, "couldn't set tcu state\n");
/*
* try to reread valid settings into buffer overwriting
* first error code
*/
retval = kone_get_settings(usb_dev, &kone->settings);
if (retval)
goto exit_no_settings;
goto exit_unlock;
}
}
retval = size;
exit_no_settings:
hid_err(usb_dev, "couldn't read settings\n");
exit_unlock:
mutex_unlock(&kone->kone_lock);
return retval;
}
static ssize_t kone_sysfs_show_startup_profile(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
return snprintf(buf, PAGE_SIZE, "%d\n", kone->settings.startup_profile);
}
static ssize_t kone_sysfs_set_startup_profile(struct device *dev,
struct device_attribute *attr, char const *buf, size_t size)
{
struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
int retval;
unsigned long new_startup_profile;
retval = strict_strtoul(buf, 10, &new_startup_profile);
if (retval)
return retval;
if (new_startup_profile < 1 || new_startup_profile > 5)
return -EINVAL;
mutex_lock(&kone->kone_lock);
kone->settings.startup_profile = new_startup_profile;
kone_set_settings_checksum(&kone->settings);
retval = kone_set_settings(usb_dev, &kone->settings);
mutex_unlock(&kone->kone_lock);
if (retval)
return retval;
/* changing the startup profile immediately activates this profile */
kone->actual_profile = new_startup_profile;
kone->actual_dpi = kone->profiles[kone->actual_profile - 1].startup_dpi;
return size;
}
/*
* Read actual dpi settings.
* Returns raw value for further processing. Refer to enum kone_polling_rates to
* get real value.
*/
static DEVICE_ATTR(actual_dpi, 0440, kone_sysfs_show_actual_dpi, NULL);
static DEVICE_ATTR(actual_profile, 0440, kone_sysfs_show_actual_profile, NULL);
/*
* The mouse can be equipped with one of four supplied weights from 5 to 20
* grams which are recognized and its value can be read out.
* This returns the raw value reported by the mouse for easy evaluation by
* software. Refer to enum kone_weights to get corresponding real weight.
*/
static DEVICE_ATTR(weight, 0440, kone_sysfs_show_weight, NULL);
/*
* Prints firmware version stored in mouse as integer.
* The raw value reported by the mouse is returned for easy evaluation, to get
* the real version number the decimal point has to be shifted 2 positions to
* the left. E.g. a value of 138 means 1.38.
*/
static DEVICE_ATTR(firmware_version, 0440,
kone_sysfs_show_firmware_version, NULL);
/*
* Prints state of Tracking Control Unit as number where 0 = off and 1 = on
* Writing 0 deactivates tcu and writing 1 calibrates and activates the tcu
*/
static DEVICE_ATTR(tcu, 0660, kone_sysfs_show_tcu, kone_sysfs_set_tcu);
/* Prints and takes the number of the profile the mouse starts with */
static DEVICE_ATTR(startup_profile, 0660,
kone_sysfs_show_startup_profile,
kone_sysfs_set_startup_profile);
static struct attribute *kone_attributes[] = {
&dev_attr_actual_dpi.attr,
&dev_attr_actual_profile.attr,
&dev_attr_weight.attr,
&dev_attr_firmware_version.attr,
&dev_attr_tcu.attr,
&dev_attr_startup_profile.attr,
NULL
};
static struct attribute_group kone_attribute_group = {
.attrs = kone_attributes
};
static struct bin_attribute kone_settings_attr = {
.attr = { .name = "settings", .mode = 0660 },
.size = sizeof(struct kone_settings),
.read = kone_sysfs_read_settings,
.write = kone_sysfs_write_settings
};
static struct bin_attribute kone_profile1_attr = {
.attr = { .name = "profile1", .mode = 0660 },
.size = sizeof(struct kone_profile),
.read = kone_sysfs_read_profile1,
.write = kone_sysfs_write_profile1
};
static struct bin_attribute kone_profile2_attr = {
.attr = { .name = "profile2", .mode = 0660 },
.size = sizeof(struct kone_profile),
.read = kone_sysfs_read_profile2,
.write = kone_sysfs_write_profile2
};
static struct bin_attribute kone_profile3_attr = {
.attr = { .name = "profile3", .mode = 0660 },
.size = sizeof(struct kone_profile),
.read = kone_sysfs_read_profile3,
.write = kone_sysfs_write_profile3
};
static struct bin_attribute kone_profile4_attr = {
.attr = { .name = "profile4", .mode = 0660 },
.size = sizeof(struct kone_profile),
.read = kone_sysfs_read_profile4,
.write = kone_sysfs_write_profile4
};
static struct bin_attribute kone_profile5_attr = {
.attr = { .name = "profile5", .mode = 0660 },
.size = sizeof(struct kone_profile),
.read = kone_sysfs_read_profile5,
.write = kone_sysfs_write_profile5
};
static int kone_create_sysfs_attributes(struct usb_interface *intf)
{
int retval;
retval = sysfs_create_group(&intf->dev.kobj, &kone_attribute_group);
if (retval)
goto exit_1;
retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_settings_attr);
if (retval)
goto exit_2;
retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile1_attr);
if (retval)
goto exit_3;
retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile2_attr);
if (retval)
goto exit_4;
retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile3_attr);
if (retval)
goto exit_5;
retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile4_attr);
if (retval)
goto exit_6;
retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile5_attr);
if (retval)
goto exit_7;
return 0;
exit_7:
sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile4_attr);
exit_6:
sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile3_attr);
exit_5:
sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile2_attr);
exit_4:
sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile1_attr);
exit_3:
sysfs_remove_bin_file(&intf->dev.kobj, &kone_settings_attr);
exit_2:
sysfs_remove_group(&intf->dev.kobj, &kone_attribute_group);
exit_1:
return retval;
}
static void kone_remove_sysfs_attributes(struct usb_interface *intf)
{
sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile5_attr);
sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile4_attr);
sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile3_attr);
sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile2_attr);
sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile1_attr);
sysfs_remove_bin_file(&intf->dev.kobj, &kone_settings_attr);
sysfs_remove_group(&intf->dev.kobj, &kone_attribute_group);
}
static int kone_init_kone_device_struct(struct usb_device *usb_dev,
struct kone_device *kone)
{
uint i;
int retval;
mutex_init(&kone->kone_lock);
for (i = 0; i < 5; ++i) {
retval = kone_get_profile(usb_dev, &kone->profiles[i], i + 1);
if (retval)
return retval;
}
retval = kone_get_settings(usb_dev, &kone->settings);
if (retval)
return retval;
retval = kone_get_firmware_version(usb_dev, &kone->firmware_version);
if (retval)
return retval;
kone->actual_profile = kone->settings.startup_profile;
kone->actual_dpi = kone->profiles[kone->actual_profile].startup_dpi;
return 0;
}
/*
* Since IGNORE_MOUSE quirk moved to hid-apple, there is no way to bind only to
* mousepart if usb_hid is compiled into the kernel and kone is compiled as
* module.
* Secial behaviour is bound only to mousepart since only mouseevents contain
* additional notifications.
*/
static int kone_init_specials(struct hid_device *hdev)
{
struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
struct usb_device *usb_dev = interface_to_usbdev(intf);
struct kone_device *kone;
int retval;
if (intf->cur_altsetting->desc.bInterfaceProtocol
== USB_INTERFACE_PROTOCOL_MOUSE) {
kone = kzalloc(sizeof(*kone), GFP_KERNEL);
if (!kone) {
hid_err(hdev, "can't alloc device descriptor\n");
return -ENOMEM;
}
hid_set_drvdata(hdev, kone);
retval = kone_init_kone_device_struct(usb_dev, kone);
if (retval) {
hid_err(hdev, "couldn't init struct kone_device\n");
goto exit_free;
}
retval = roccat_connect(hdev);
if (retval < 0) {
hid_err(hdev, "couldn't init char dev\n");
/* be tolerant about not getting chrdev */
} else {
kone->roccat_claimed = 1;
kone->chrdev_minor = retval;
}
retval = kone_create_sysfs_attributes(intf);
if (retval) {
hid_err(hdev, "cannot create sysfs files\n");
goto exit_free;
}
} else {
hid_set_drvdata(hdev, NULL);
}
return 0;
exit_free:
kfree(kone);
return retval;
}
static void kone_remove_specials(struct hid_device *hdev)
{
struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
struct kone_device *kone;
if (intf->cur_altsetting->desc.bInterfaceProtocol
== USB_INTERFACE_PROTOCOL_MOUSE) {
kone_remove_sysfs_attributes(intf);
kone = hid_get_drvdata(hdev);
if (kone->roccat_claimed)
roccat_disconnect(kone->chrdev_minor);
kfree(hid_get_drvdata(hdev));
}
}
static int kone_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int retval;
retval = hid_parse(hdev);
if (retval) {
hid_err(hdev, "parse failed\n");
goto exit;
}
retval = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (retval) {
hid_err(hdev, "hw start failed\n");
goto exit;
}
retval = kone_init_specials(hdev);
if (retval) {
hid_err(hdev, "couldn't install mouse\n");
goto exit_stop;
}
return 0;
exit_stop:
hid_hw_stop(hdev);
exit:
return retval;
}
static void kone_remove(struct hid_device *hdev)
{
kone_remove_specials(hdev);
hid_hw_stop(hdev);
}
/* handle special events and keep actual profile and dpi values up to date */
static void kone_keep_values_up_to_date(struct kone_device *kone,
struct kone_mouse_event const *event)
{
switch (event->event) {
case kone_mouse_event_switch_profile:
case kone_mouse_event_osd_profile:
kone->actual_profile = event->value;
kone->actual_dpi = kone->profiles[kone->actual_profile - 1].
startup_dpi;
break;
case kone_mouse_event_switch_dpi:
case kone_mouse_event_osd_dpi:
kone->actual_dpi = event->value;
break;
}
}
static void kone_report_to_chrdev(struct kone_device const *kone,
struct kone_mouse_event const *event)
{
struct kone_roccat_report roccat_report;
switch (event->event) {
case kone_mouse_event_switch_profile:
case kone_mouse_event_switch_dpi:
case kone_mouse_event_osd_profile:
case kone_mouse_event_osd_dpi:
roccat_report.event = event->event;
roccat_report.value = event->value;
roccat_report.key = 0;
roccat_report_event(kone->chrdev_minor,
(uint8_t *)&roccat_report,
sizeof(struct kone_roccat_report));
break;
case kone_mouse_event_call_overlong_macro:
if (event->value == kone_keystroke_action_press) {
roccat_report.event = kone_mouse_event_call_overlong_macro;
roccat_report.value = kone->actual_profile;
roccat_report.key = event->macro_key;
roccat_report_event(kone->chrdev_minor,
(uint8_t *)&roccat_report,
sizeof(struct kone_roccat_report));
}
break;
}
}
/*
* Is called for keyboard- and mousepart.
* Only mousepart gets informations about special events in its extended event
* structure.
*/
static int kone_raw_event(struct hid_device *hdev, struct hid_report *report,
u8 *data, int size)
{
struct kone_device *kone = hid_get_drvdata(hdev);
struct kone_mouse_event *event = (struct kone_mouse_event *)data;
/* keyboard events are always processed by default handler */
if (size != sizeof(struct kone_mouse_event))
return 0;
/*
* Firmware 1.38 introduced new behaviour for tilt and special buttons.
* Pressed button is reported in each movement event.
* Workaround sends only one event per press.
*/
if (memcmp(&kone->last_mouse_event.tilt, &event->tilt, 5))
memcpy(&kone->last_mouse_event, event,
sizeof(struct kone_mouse_event));
else
memset(&event->tilt, 0, 5);
kone_keep_values_up_to_date(kone, event);
if (kone->roccat_claimed)
kone_report_to_chrdev(kone, event);
return 0; /* always do further processing */
}
static const struct hid_device_id kone_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) },
{ }
};
MODULE_DEVICE_TABLE(hid, kone_devices);
static struct hid_driver kone_driver = {
.name = "kone",
.id_table = kone_devices,
.probe = kone_probe,
.remove = kone_remove,
.raw_event = kone_raw_event
};
static int __init kone_init(void)
{
return hid_register_driver(&kone_driver);
}
static void __exit kone_exit(void)
{
hid_unregister_driver(&kone_driver);
}
module_init(kone_init);
module_exit(kone_exit);
MODULE_AUTHOR("Stefan Achatz");
MODULE_DESCRIPTION("USB Roccat Kone driver");
MODULE_LICENSE("GPL v2");