Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"One (hopefully) last batch of x86 fixes. You asked for the patch by
patch justifications, so here they are:
x86, MCE: Retract most UAPI exports
This one unexports from userspace a bunch of definitions which should
never have been exported. We really don't want to create an
accidental legacy here.
x86, doc: Add a bootloader ID for OVMF
This is a documentation-only patch, just recording the official
assignment of a boot loader ID.
x86: Do not leak kernel page mapping locations
Security: avoid making it needlessly easy for user space to probe the
kernel memory layout.
x86/mm: Check if PUD is large when validating a kernel address
Prevent failures using /proc/kcore when using 1G pages.
x86/apic: Work around boot failure on HP ProLiant DL980 G7 Server systems
Works around a BIOS problem causing boot failures on affected hardware."
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Check if PUD is large when validating a kernel address
x86/apic: Work around boot failure on HP ProLiant DL980 G7 Server systems
x86, doc: Add a bootloader ID for OVMF
x86: Do not leak kernel page mapping locations
x86, MCE: Retract most UAPI exports
diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
index e540fd6..b443f1d 100644
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@@ -390,6 +390,7 @@
F Special (0xFF = undefined)
10 Reserved
11 Minimal Linux Bootloader <http://sebastian-plotz.blogspot.de>
+ 12 OVMF UEFI virtualization stack
Please contact <hpa@zytor.com> if you need a bootloader ID
value assigned.
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index ecdfee6..f4076af 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -3,6 +3,90 @@
#include <uapi/asm/mce.h>
+/*
+ * Machine Check support for x86
+ */
+
+/* MCG_CAP register defines */
+#define MCG_BANKCNT_MASK 0xff /* Number of Banks */
+#define MCG_CTL_P (1ULL<<8) /* MCG_CTL register available */
+#define MCG_EXT_P (1ULL<<9) /* Extended registers available */
+#define MCG_CMCI_P (1ULL<<10) /* CMCI supported */
+#define MCG_EXT_CNT_MASK 0xff0000 /* Number of Extended registers */
+#define MCG_EXT_CNT_SHIFT 16
+#define MCG_EXT_CNT(c) (((c) & MCG_EXT_CNT_MASK) >> MCG_EXT_CNT_SHIFT)
+#define MCG_SER_P (1ULL<<24) /* MCA recovery/new status bits */
+
+/* MCG_STATUS register defines */
+#define MCG_STATUS_RIPV (1ULL<<0) /* restart ip valid */
+#define MCG_STATUS_EIPV (1ULL<<1) /* ip points to correct instruction */
+#define MCG_STATUS_MCIP (1ULL<<2) /* machine check in progress */
+
+/* MCi_STATUS register defines */
+#define MCI_STATUS_VAL (1ULL<<63) /* valid error */
+#define MCI_STATUS_OVER (1ULL<<62) /* previous errors lost */
+#define MCI_STATUS_UC (1ULL<<61) /* uncorrected error */
+#define MCI_STATUS_EN (1ULL<<60) /* error enabled */
+#define MCI_STATUS_MISCV (1ULL<<59) /* misc error reg. valid */
+#define MCI_STATUS_ADDRV (1ULL<<58) /* addr reg. valid */
+#define MCI_STATUS_PCC (1ULL<<57) /* processor context corrupt */
+#define MCI_STATUS_S (1ULL<<56) /* Signaled machine check */
+#define MCI_STATUS_AR (1ULL<<55) /* Action required */
+#define MCACOD 0xffff /* MCA Error Code */
+
+/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */
+#define MCACOD_SCRUB 0x00C0 /* 0xC0-0xCF Memory Scrubbing */
+#define MCACOD_SCRUBMSK 0xfff0
+#define MCACOD_L3WB 0x017A /* L3 Explicit Writeback */
+#define MCACOD_DATA 0x0134 /* Data Load */
+#define MCACOD_INSTR 0x0150 /* Instruction Fetch */
+
+/* MCi_MISC register defines */
+#define MCI_MISC_ADDR_LSB(m) ((m) & 0x3f)
+#define MCI_MISC_ADDR_MODE(m) (((m) >> 6) & 7)
+#define MCI_MISC_ADDR_SEGOFF 0 /* segment offset */
+#define MCI_MISC_ADDR_LINEAR 1 /* linear address */
+#define MCI_MISC_ADDR_PHYS 2 /* physical address */
+#define MCI_MISC_ADDR_MEM 3 /* memory address */
+#define MCI_MISC_ADDR_GENERIC 7 /* generic */
+
+/* CTL2 register defines */
+#define MCI_CTL2_CMCI_EN (1ULL << 30)
+#define MCI_CTL2_CMCI_THRESHOLD_MASK 0x7fffULL
+
+#define MCJ_CTX_MASK 3
+#define MCJ_CTX(flags) ((flags) & MCJ_CTX_MASK)
+#define MCJ_CTX_RANDOM 0 /* inject context: random */
+#define MCJ_CTX_PROCESS 0x1 /* inject context: process */
+#define MCJ_CTX_IRQ 0x2 /* inject context: IRQ */
+#define MCJ_NMI_BROADCAST 0x4 /* do NMI broadcasting */
+#define MCJ_EXCEPTION 0x8 /* raise as exception */
+#define MCJ_IRQ_BRAODCAST 0x10 /* do IRQ broadcasting */
+
+#define MCE_OVERFLOW 0 /* bit 0 in flags means overflow */
+
+/* Software defined banks */
+#define MCE_EXTENDED_BANK 128
+#define MCE_THERMAL_BANK (MCE_EXTENDED_BANK + 0)
+#define K8_MCE_THRESHOLD_BASE (MCE_EXTENDED_BANK + 1)
+
+#define MCE_LOG_LEN 32
+#define MCE_LOG_SIGNATURE "MACHINECHECK"
+
+/*
+ * This structure contains all data related to the MCE log. Also
+ * carries a signature to make it easier to find from external
+ * debugging tools. Each entry is only valid when its finished flag
+ * is set.
+ */
+struct mce_log {
+ char signature[12]; /* "MACHINECHECK" */
+ unsigned len; /* = MCE_LOG_LEN */
+ unsigned next;
+ unsigned flags;
+ unsigned recordlen; /* length of struct mce */
+ struct mce entry[MCE_LOG_LEN];
+};
struct mca_config {
bool dont_log_ce;
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 5199db2..1c1a955 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -142,6 +142,11 @@
return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
}
+static inline unsigned long pud_pfn(pud_t pud)
+{
+ return (pud_val(pud) & PTE_PFN_MASK) >> PAGE_SHIFT;
+}
+
#define pte_page(pte) pfn_to_page(pte_pfn(pte))
static inline int pmd_large(pmd_t pte)
diff --git a/arch/x86/include/uapi/asm/mce.h b/arch/x86/include/uapi/asm/mce.h
index 58c8298..a0eab85 100644
--- a/arch/x86/include/uapi/asm/mce.h
+++ b/arch/x86/include/uapi/asm/mce.h
@@ -4,66 +4,6 @@
#include <linux/types.h>
#include <asm/ioctls.h>
-/*
- * Machine Check support for x86
- */
-
-/* MCG_CAP register defines */
-#define MCG_BANKCNT_MASK 0xff /* Number of Banks */
-#define MCG_CTL_P (1ULL<<8) /* MCG_CTL register available */
-#define MCG_EXT_P (1ULL<<9) /* Extended registers available */
-#define MCG_CMCI_P (1ULL<<10) /* CMCI supported */
-#define MCG_EXT_CNT_MASK 0xff0000 /* Number of Extended registers */
-#define MCG_EXT_CNT_SHIFT 16
-#define MCG_EXT_CNT(c) (((c) & MCG_EXT_CNT_MASK) >> MCG_EXT_CNT_SHIFT)
-#define MCG_SER_P (1ULL<<24) /* MCA recovery/new status bits */
-
-/* MCG_STATUS register defines */
-#define MCG_STATUS_RIPV (1ULL<<0) /* restart ip valid */
-#define MCG_STATUS_EIPV (1ULL<<1) /* ip points to correct instruction */
-#define MCG_STATUS_MCIP (1ULL<<2) /* machine check in progress */
-
-/* MCi_STATUS register defines */
-#define MCI_STATUS_VAL (1ULL<<63) /* valid error */
-#define MCI_STATUS_OVER (1ULL<<62) /* previous errors lost */
-#define MCI_STATUS_UC (1ULL<<61) /* uncorrected error */
-#define MCI_STATUS_EN (1ULL<<60) /* error enabled */
-#define MCI_STATUS_MISCV (1ULL<<59) /* misc error reg. valid */
-#define MCI_STATUS_ADDRV (1ULL<<58) /* addr reg. valid */
-#define MCI_STATUS_PCC (1ULL<<57) /* processor context corrupt */
-#define MCI_STATUS_S (1ULL<<56) /* Signaled machine check */
-#define MCI_STATUS_AR (1ULL<<55) /* Action required */
-#define MCACOD 0xffff /* MCA Error Code */
-
-/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */
-#define MCACOD_SCRUB 0x00C0 /* 0xC0-0xCF Memory Scrubbing */
-#define MCACOD_SCRUBMSK 0xfff0
-#define MCACOD_L3WB 0x017A /* L3 Explicit Writeback */
-#define MCACOD_DATA 0x0134 /* Data Load */
-#define MCACOD_INSTR 0x0150 /* Instruction Fetch */
-
-/* MCi_MISC register defines */
-#define MCI_MISC_ADDR_LSB(m) ((m) & 0x3f)
-#define MCI_MISC_ADDR_MODE(m) (((m) >> 6) & 7)
-#define MCI_MISC_ADDR_SEGOFF 0 /* segment offset */
-#define MCI_MISC_ADDR_LINEAR 1 /* linear address */
-#define MCI_MISC_ADDR_PHYS 2 /* physical address */
-#define MCI_MISC_ADDR_MEM 3 /* memory address */
-#define MCI_MISC_ADDR_GENERIC 7 /* generic */
-
-/* CTL2 register defines */
-#define MCI_CTL2_CMCI_EN (1ULL << 30)
-#define MCI_CTL2_CMCI_THRESHOLD_MASK 0x7fffULL
-
-#define MCJ_CTX_MASK 3
-#define MCJ_CTX(flags) ((flags) & MCJ_CTX_MASK)
-#define MCJ_CTX_RANDOM 0 /* inject context: random */
-#define MCJ_CTX_PROCESS 0x1 /* inject context: process */
-#define MCJ_CTX_IRQ 0x2 /* inject context: IRQ */
-#define MCJ_NMI_BROADCAST 0x4 /* do NMI broadcasting */
-#define MCJ_EXCEPTION 0x8 /* raise as exception */
-#define MCJ_IRQ_BRAODCAST 0x10 /* do IRQ broadcasting */
-
/* Fields are zero when not available */
struct mce {
__u64 status;
@@ -87,35 +27,8 @@
__u64 mcgcap; /* MCGCAP MSR: machine check capabilities of CPU */
};
-/*
- * This structure contains all data related to the MCE log. Also
- * carries a signature to make it easier to find from external
- * debugging tools. Each entry is only valid when its finished flag
- * is set.
- */
-
-#define MCE_LOG_LEN 32
-
-struct mce_log {
- char signature[12]; /* "MACHINECHECK" */
- unsigned len; /* = MCE_LOG_LEN */
- unsigned next;
- unsigned flags;
- unsigned recordlen; /* length of struct mce */
- struct mce entry[MCE_LOG_LEN];
-};
-
-#define MCE_OVERFLOW 0 /* bit 0 in flags means overflow */
-
-#define MCE_LOG_SIGNATURE "MACHINECHECK"
-
#define MCE_GET_RECORD_LEN _IOR('M', 1, int)
#define MCE_GET_LOG_LEN _IOR('M', 2, int)
#define MCE_GETCLEAR_FLAGS _IOR('M', 3, int)
-/* Software defined banks */
-#define MCE_EXTENDED_BANK 128
-#define MCE_THERMAL_BANK MCE_EXTENDED_BANK + 0
-#define K8_MCE_THRESHOLD_BASE (MCE_EXTENDED_BANK + 1)
-
#endif /* _UAPI_ASM_X86_MCE_H */
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index e03a1e1..562a76d 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -20,18 +20,19 @@
}
early_param("x2apic_phys", set_x2apic_phys_mode);
+static bool x2apic_fadt_phys(void)
+{
+ if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) &&
+ (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
+ printk(KERN_DEBUG "System requires x2apic physical mode\n");
+ return true;
+ }
+ return false;
+}
+
static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
- if (x2apic_phys)
- return x2apic_enabled();
- else if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) &&
- (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL) &&
- x2apic_enabled()) {
- printk(KERN_DEBUG "System requires x2apic physical mode\n");
- return 1;
- }
- else
- return 0;
+ return x2apic_enabled() && (x2apic_phys || x2apic_fadt_phys());
}
static void
@@ -82,7 +83,7 @@
static int x2apic_phys_probe(void)
{
- if (x2apic_mode && x2apic_phys)
+ if (x2apic_mode && (x2apic_phys || x2apic_fadt_phys()))
return 1;
return apic == &apic_x2apic_phys;
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 027088f..fb674fd 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -748,13 +748,15 @@
return;
}
#endif
+ /* Kernel addresses are always protection faults: */
+ if (address >= TASK_SIZE)
+ error_code |= PF_PROT;
- if (unlikely(show_unhandled_signals))
+ if (likely(show_unhandled_signals))
show_signal_msg(regs, error_code, address, tsk);
- /* Kernel addresses are always protection faults: */
tsk->thread.cr2 = address;
- tsk->thread.error_code = error_code | (address >= TASK_SIZE);
+ tsk->thread.error_code = error_code;
tsk->thread.trap_nr = X86_TRAP_PF;
force_sig_info_fault(SIGSEGV, si_code, address, tsk, 0);
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 2ead3c8..75c9a6a 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -831,6 +831,9 @@
if (pud_none(*pud))
return 0;
+ if (pud_large(*pud))
+ return pfn_valid(pud_pfn(*pud));
+
pmd = pmd_offset(pud, addr);
if (pmd_none(*pmd))
return 0;