treewide: Fix typos in various parts of the kernel, and fix some comments.
The below patch fixes some typos in various parts of the kernel, as well as fixes some comments.
Please let me know if I missed anything, and I will try to get it changed and resent.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
index c2793a8..d707756 100644
--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -356,7 +356,7 @@
*
* PARAMETERS: register_id - ID of ACPI Bit Register to access
* Value - Value to write to the register, in bit
- * position zero. The bit is automaticallly
+ * position zero. The bit is automatically
* shifted to the correct position.
*
* RETURN: Status
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index f759ad4..8069322 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -613,7 +613,7 @@
case XenbusStateConnected:
/*
* Ensure we connect even when two watches fire in
- * close successsion and we miss the intermediate value
+ * close succession and we miss the intermediate value
* of frontend_state.
*/
if (dev->state == XenbusStateConnected)
diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
index 3ed20e8..cdd4c09f 100644
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -560,7 +560,7 @@
BT_CONTROL(BT_H_BUSY); /* set */
/*
- * Uncached, ordered writes should just proceeed serially but
+ * Uncached, ordered writes should just proceed serially but
* some BMCs don't clear B2H_ATN with one hit. Fast-path a
* workaround without too much penalty to the general case.
*/
diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c
index 3840096..fc75706 100644
--- a/drivers/edac/ppc4xx_edac.c
+++ b/drivers/edac/ppc4xx_edac.c
@@ -142,7 +142,7 @@
/*
* The ibm,sdram-4xx-ddr2 Device Control Registers (DCRs) are
- * indirectly acccessed and have a base and length defined by the
+ * indirectly accessed and have a base and length defined by the
* device tree. The base can be anything; however, we expect the
* length to be precisely two registers, the first for the address
* window and the second for the data window.
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index d4d05d2..f6d2641 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -1550,7 +1550,7 @@
if (zoran_formats[i].flags & flag && num++ == fmt->index) {
strncpy(fmt->description, zoran_formats[i].name,
sizeof(fmt->description) - 1);
- /* fmt struct pre-zeroed, so adding '\0' not neeed */
+ /* fmt struct pre-zeroed, so adding '\0' not needed */
fmt->pixelformat = zoran_formats[i].fourcc;
if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED)
fmt->flags |= V4L2_FMT_FLAG_COMPRESSED;
diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h
index fd62228..19fb21b 100644
--- a/drivers/message/fusion/lsi/mpi_ioc.h
+++ b/drivers/message/fusion/lsi/mpi_ioc.h
@@ -857,7 +857,7 @@
#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_MASK (0xFFFF0000)
#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_SHIFT (16)
-/* SAS Discovery Errror Event data */
+/* SAS Discovery Error Event data */
typedef struct _EVENT_DATA_DISCOVERY_ERROR
{
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index b56636d..2a4f2f1 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -1664,7 +1664,7 @@
switch_bank(iobase, BANK0);
outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
- /* Check for underrrun! */
+ /* Check for underrun! */
if (inb(iobase+ASCR) & ASCR_TXUR) {
self->netdev->stats.tx_errors++;
self->netdev->stats.tx_fifo_errors++;
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index 6d64790..2d456dd 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -942,14 +942,14 @@
iobase = self->io.fir_base;
/* Disable DMA */
// DisableDmaChannel(self->io.dma);
- /* Check for underrrun! */
+ /* Check for underrun! */
/* Clear bit, by writing 1 into it */
Tx_status = GetTXStatus(iobase);
if (Tx_status & 0x08) {
self->netdev->stats.tx_errors++;
self->netdev->stats.tx_fifo_errors++;
hwreset(self);
-// how to clear underrrun ?
+ /* how to clear underrun? */
} else {
self->netdev->stats.tx_packets++;
ResetChip(iobase, 3);
diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c
index c436660..7d43506 100644
--- a/drivers/net/irda/w83977af_ir.c
+++ b/drivers/net/irda/w83977af_ir.c
@@ -677,7 +677,7 @@
switch_bank(iobase, SET0);
outb(inb(iobase+HCR) & ~HCR_EN_DMA, iobase+HCR);
- /* Check for underrrun! */
+ /* Check for underrun! */
if (inb(iobase+AUDR) & AUDR_UNDR) {
IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __func__ );
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index c421a61..c806d45 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -75,7 +75,7 @@
* device is up and running or shutdown (through ifconfig up /
* down). Bus-generic only.
*
- * - control ops: control.c - implements various commmands for
+ * - control ops: control.c - implements various commands for
* controlling the device. bus-generic only.
*
* - device model glue: driver.c - implements helpers for the
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
index f5bd3a3..9d89d7c 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
@@ -466,8 +466,8 @@
bool int_migration = *(bool *) (val);
if (int_migration) {
- /* Set interrrupt migration timer and
- * corresponging Tx/Rx counter.
+ /* Set interrupt migration timer and
+ * corresponding Tx/Rx counter.
* timer 25ns*0xfa0=100us for 0xf packets.
* 0x306:Rx, 0x307:Tx */
rtl_write_dword(rtlpriv, REG_INT_MIG, 0xfe000fa0);
diff --git a/drivers/parport/parport_mfc3.c b/drivers/parport/parport_mfc3.c
index 362db31..1c0c642 100644
--- a/drivers/parport/parport_mfc3.c
+++ b/drivers/parport/parport_mfc3.c
@@ -397,7 +397,7 @@
MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
-MODULE_DESCRIPTION("Parport Driver for Multiface 3 expansion cards Paralllel Port");
+MODULE_DESCRIPTION("Parport Driver for Multiface 3 expansion cards Parallel Port");
MODULE_SUPPORTED_DEVICE("Multiface 3 Parallel Port");
MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm.c b/drivers/scsi/aic7xxx/aicasm/aicasm.c
index e4a7787..2e3117a 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm.c
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm.c
@@ -1,5 +1,5 @@
/*
- * Aic7xxx SCSI host adapter firmware asssembler
+ * Aic7xxx SCSI host adapter firmware assembler
*
* Copyright (c) 1997, 1998, 2000, 2001 Justin T. Gibbs.
* Copyright (c) 2001, 2002 Adaptec Inc.
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 218f71a..d77891e 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -4494,7 +4494,7 @@
/* */
/* Initialize a CCB to default values */
/* */
-/* ASSUMED to be callled from within a lock */
+/* ASSUMED to be called from within a lock */
/* */
/****************************************************************************/
static ips_scb_t *
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index cbd5a20..866af45 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -744,7 +744,7 @@
uint8_t res4[0x36]; /* 8A-BF */
uint8_t iscsi_name[0xE0]; /* C0-19F : xxzzy Make this a
* pointer to a string so we
- * don't have to reserve soooo
+ * don't have to reserve so
* much RAM */
uint8_t link_local_ipv6_addr[0x10]; /* 1A0-1AF */
uint8_t res5[0x10]; /* 1B0-1BF */
diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
index a18996d..7264116 100644
--- a/drivers/scsi/vmw_pvscsi.c
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -1144,7 +1144,7 @@
*
* These are statically allocated. Trying to be clever was not worth it.
*
- * Dynamic allocation can fail, and we can't go deeep into the memory
+ * Dynamic allocation can fail, and we can't go deep into the memory
* allocator, since we're a SCSI driver, and trying too hard to allocate
* memory might generate disk I/O. We also don't want to fail disk I/O
* in that case because we can't get an allocation - the I/O could be
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
index c75a1a1..f9545b0 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
@@ -3598,7 +3598,7 @@
n = comedi_buf_write_alloc(s->async,
(7 + 12) * sizeof(unsigned int));
- /* If not enougth memory available, event is set to Comedi Buffer Errror */
+ /* If not enough memory available, event is set to Comedi Buffer Error */
if (n > ((7 + 12) * sizeof(unsigned int))) {
printk("\ncomedi_buf_write_alloc n = %i", n);
s->async->events |= COMEDI_CB_ERROR;
diff --git a/drivers/staging/cxt1e1/libsbew.h b/drivers/staging/cxt1e1/libsbew.h
index 5c99646..ae8f06d 100644
--- a/drivers/staging/cxt1e1/libsbew.h
+++ b/drivers/staging/cxt1e1/libsbew.h
@@ -323,7 +323,7 @@
#define CFG_CH_DINV_TX 0x02
-/* Posssible resettable chipsets/functions */
+/* Possible resettable chipsets/functions */
#define RESET_DEV_TEMUX 1
#define RESET_DEV_TECT3 RESET_DEV_TEMUX
#define RESET_DEV_PLL 2
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
index b3d743a..917bbb0 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
@@ -344,10 +344,10 @@
}
mdelay(1);
if (info->AsicID == ELECTRABUZZ_ID) {
- // set watermark to -1 in order to not generate an interrrupt
+ // set watermark to -1 in order to not generate an interrupt
ft1000_write_reg(dev, FT1000_REG_WATERMARK, 0xffff);
} else {
- // set watermark to -1 in order to not generate an interrrupt
+ // set watermark to -1 in order to not generate an interrupt
ft1000_write_reg(dev, FT1000_REG_MAG_WATERMARK, 0xffff);
}
// clear interrupts
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
index aaf44c3..43b1d36 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
@@ -601,7 +601,7 @@
mdelay(1);
- /* set watermark to -1 in order to not generate an interrrupt */
+ /* set watermark to -1 in order to not generate an interrupt */
ft1000_write_register(ft1000dev, 0xffff, FT1000_REG_MAG_WATERMARK);
/* clear interrupts */
diff --git a/drivers/staging/iio/industrialio-trigger.c b/drivers/staging/iio/industrialio-trigger.c
index 2c626e0..68a4d4e 100644
--- a/drivers/staging/iio/industrialio-trigger.c
+++ b/drivers/staging/iio/industrialio-trigger.c
@@ -295,7 +295,7 @@
EXPORT_SYMBOL_GPL(iio_dealloc_pollfunc);
/**
- * iio_trigger_read_currrent() - trigger consumer sysfs query which trigger
+ * iio_trigger_read_current() - trigger consumer sysfs query which trigger
*
* For trigger consumers the current_trigger interface allows the trigger
* used by the device to be queried.
diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c
index 8ac3fae..f47571e 100644
--- a/drivers/staging/sep/sep_driver.c
+++ b/drivers/staging/sep/sep_driver.c
@@ -1235,7 +1235,7 @@
/* Counter of lli array entry */
u32 array_counter;
- /* Init currrent table data size and lli array entry counter */
+ /* Init current table data size and lli array entry counter */
curr_table_data_size = 0;
array_counter = 0;
*num_table_entries_ptr = 1;
diff --git a/drivers/staging/tidspbridge/Kconfig b/drivers/staging/tidspbridge/Kconfig
index 93de4f2..21a559e 100644
--- a/drivers/staging/tidspbridge/Kconfig
+++ b/drivers/staging/tidspbridge/Kconfig
@@ -78,7 +78,7 @@
bool "Notify power errors"
depends on TIDSPBRIDGE
help
- Enable notifications to registered clients on the event of power errror
+ Enable notifications to registered clients on the event of power error
trying to suspend bridge driver. Say Y, to signal this event as a fatal
error, this will require a bridge restart to recover.
diff --git a/drivers/staging/tidspbridge/rmgr/dbdcd.c b/drivers/staging/tidspbridge/rmgr/dbdcd.c
index a7e407e..fda2402 100644
--- a/drivers/staging/tidspbridge/rmgr/dbdcd.c
+++ b/drivers/staging/tidspbridge/rmgr/dbdcd.c
@@ -285,7 +285,7 @@
enum_refs = 0;
/*
- * TODO: Revisit, this is not an errror case but code
+ * TODO: Revisit, this is not an error case but code
* expects non-zero value.
*/
status = ENODATA;
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index 9bfac65..b5c56a9 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -481,7 +481,7 @@
encryption_value = 0;
}
- /* Set the encryption type for commmunicating with the device */
+ /* Set the encryption type for communicating with the device */
result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
USB_REQ_SET_ENCRYPTION,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index 2ee18cf..dbf0f15 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -473,7 +473,7 @@
/* End handling */
/* =========================================== */
-/* Endpoint now idle - release it's ETD(s) or asssign to queued request */
+/* Endpoint now idle - release its ETD(s) or assign to queued request */
static void ep_idle(struct imx21 *imx21, struct ep_priv *ep_priv)
{
int i;
diff --git a/drivers/usb/otg/fsl_otg.c b/drivers/usb/otg/fsl_otg.c
index 0f420b2..2d9cc44 100644
--- a/drivers/usb/otg/fsl_otg.c
+++ b/drivers/usb/otg/fsl_otg.c
@@ -639,7 +639,7 @@
* Delayed pin detect interrupt processing.
*
* When the Mini-A cable is disconnected from the board,
- * the pin-detect interrupt happens before the disconnnect
+ * the pin-detect interrupt happens before the disconnect
* interrupts for the connected device(s). In order to
* process the disconnect interrupt(s) prior to switching
* roles, the pin-detect interrupts are delayed, and handled
diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c
index ba86643..a315d4d 100644
--- a/drivers/uwb/i1480/dfu/usb.c
+++ b/drivers/uwb/i1480/dfu/usb.c
@@ -104,7 +104,7 @@
*
* Data buffers to USB cannot be on the stack or in vmalloc'ed areas,
* so we copy it to the local i1480 buffer before proceeding. In any
- * case, we have a max size we can send, soooo.
+ * case, we have a max size we can send.
*/
static
int i1480_usb_write(struct i1480 *i1480, u32 memory_address,