Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (23 commits)
pcmcia: Fix ide-cs sparse warning
pcmcia: ide-cs debugging bugfix
pcmcia: allow for longer CIS firmware files
pcmcia: cm40x0 cdev lock_kernel() pushdown
pcmcia: (re)move {pcmcia,pccard}_get_status
pcmcia: kill IN_CARD_SERVICES
pcmcia: Remove unused header file code
pcmcia: remove unused bulkmem.h
pcmcia: simplify pccard_validate_cis
pcmcia: carve out ioctl adjust function to pcmcia_ioctl
pcmcia: irq probe can be done without risking an IRQ storm
pcmcia: Fix ti12xx_2nd_slot_empty always failing
pcmcia: check for pointer instead of pointer address
pcmcia: switch cm4000_cs.c to unlocked_ioctl
pcmcia: simplify rsrc_nonstatic attributes
pcmcia: add support CompactFlash PCMCIA support for Blackfin.
pcmcia: remove version.h
pcmcia: cs: kill thread_wait
pcmcia: i82365.c: check request_irq return value
pcmcia: fix Alchemy warnings
...
diff --git a/.gitignore b/.gitignore
index d24ad50..869e1a3 100644
--- a/.gitignore
+++ b/.gitignore
@@ -3,6 +3,10 @@
# subdirectories here. Add them in the ".gitignore" file
# in that subdirectory instead.
#
+# NOTE! Please use 'git-ls-files -i --exclude-standard'
+# command after changing this file, to see if there are
+# any tracked files which get ignored after the change.
+#
# Normal rules
#
.*
@@ -18,18 +22,21 @@
*.lst
*.symtypes
*.order
+*.elf
+*.bin
+*.gz
#
# Top-level generic files
#
tags
TAGS
-vmlinux*
-!vmlinux.lds.S
+vmlinux
System.map
Module.markers
Module.symvers
!.gitignore
+!.mailmap
#
# Generated include files
diff --git a/CREDITS b/CREDITS
index 8fec7b3..e97bea0 100644
--- a/CREDITS
+++ b/CREDITS
@@ -2611,8 +2611,9 @@
S: Australia
N: Miguel Ojeda Sandonis
-E: maxextreme@gmail.com
-W: http://maxextreme.googlepages.com/
+E: miguel.ojeda.sandonis@gmail.com
+W: http://miguelojeda.es
+W: http://jair.lab.fi.uva.es/~migojed/
D: Author of the ks0108, cfag12864b and cfag12864bfb auxiliary display drivers.
D: Maintainer of the auxiliary display drivers tree (drivers/auxdisplay/*)
S: C/ Mieses 20, 9-B
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
index 4bd9ea5..44f52a4 100644
--- a/Documentation/ABI/testing/sysfs-block
+++ b/Documentation/ABI/testing/sysfs-block
@@ -26,3 +26,37 @@
I/O statistics of partition <part>. The format is the
same as the above-written /sys/block/<disk>/stat
format.
+
+
+What: /sys/block/<disk>/integrity/format
+Date: June 2008
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Metadata format for integrity capable block device.
+ E.g. T10-DIF-TYPE1-CRC.
+
+
+What: /sys/block/<disk>/integrity/read_verify
+Date: June 2008
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Indicates whether the block layer should verify the
+ integrity of read requests serviced by devices that
+ support sending integrity metadata.
+
+
+What: /sys/block/<disk>/integrity/tag_size
+Date: June 2008
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Number of bytes of integrity tag space available per
+ 512 bytes of data.
+
+
+What: /sys/block/<disk>/integrity/write_generate
+Date: June 2008
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Indicates whether the block layer should automatically
+ generate checksums for write requests bound for
+ devices that support receiving integrity metadata.
diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
index 028a844..e8acd1f 100644
--- a/Documentation/DocBook/kgdb.tmpl
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -84,10 +84,9 @@
runs an instance of gdb against the vmlinux file which contains
the symbols (not boot image such as bzImage, zImage, uImage...).
In gdb the developer specifies the connection parameters and
- connects to kgdb. Depending on which kgdb I/O modules exist in
- the kernel for a given architecture, it may be possible to debug
- the test machine's kernel with the development machine using a
- rs232 or ethernet connection.
+ connects to kgdb. The type of connection a developer makes with
+ gdb depends on the availability of kgdb I/O modules compiled as
+ builtin's or kernel modules in the test machine's kernel.
</para>
</chapter>
<chapter id="CompilingAKernel">
@@ -223,7 +222,7 @@
</para>
<para>
IMPORTANT NOTE: Using this option with kgdb over the console
- (kgdboc) or kgdb over ethernet (kgdboe) is not supported.
+ (kgdboc) is not supported.
</para>
</sect1>
</chapter>
@@ -249,18 +248,11 @@
(gdb) target remote /dev/ttyS0
</programlisting>
<para>
- Example (kgdb to a terminal server):
+ Example (kgdb to a terminal server on tcp port 2012):
</para>
<programlisting>
% gdb ./vmlinux
- (gdb) target remote udp:192.168.2.2:6443
- </programlisting>
- <para>
- Example (kgdb over ethernet):
- </para>
- <programlisting>
- % gdb ./vmlinux
- (gdb) target remote udp:192.168.2.2:6443
+ (gdb) target remote 192.168.2.2:2012
</programlisting>
<para>
Once connected, you can debug a kernel the way you would debug an
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 0291ade..619e8ca 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -377,7 +377,7 @@
bugzilla.kernel.org is where the Linux kernel developers track kernel
bugs. Users are encouraged to report all bugs that they find in this
tool. For details on how to use the kernel bugzilla, please see:
- http://test.kernel.org/bugzilla/faq.html
+ http://bugzilla.kernel.org/page.cgi?id=faq.html
The file REPORTING-BUGS in the main kernel source directory has a good
template for how to report a possible kernel bug, and details what kind
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 9c93a03..118ca6e 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -327,6 +327,52 @@
now, but you can do this to mark internal company procedures or just
point out some special detail about the sign-off.
+If you are a subsystem or branch maintainer, sometimes you need to slightly
+modify patches you receive in order to merge them, because the code is not
+exactly the same in your tree and the submitters'. If you stick strictly to
+rule (c), you should ask the submitter to rediff, but this is a totally
+counter-productive waste of time and energy. Rule (b) allows you to adjust
+the code, but then it is very impolite to change one submitter's code and
+make him endorse your bugs. To solve this problem, it is recommended that
+you add a line between the last Signed-off-by header and yours, indicating
+the nature of your changes. While there is nothing mandatory about this, it
+seems like prepending the description with your mail and/or name, all
+enclosed in square brackets, is noticeable enough to make it obvious that
+you are responsible for last-minute changes. Example :
+
+ Signed-off-by: Random J Developer <random@developer.example.org>
+ [lucky@maintainer.example.org: struct foo moved from foo.c to foo.h]
+ Signed-off-by: Lucky K Maintainer <lucky@maintainer.example.org>
+
+This practise is particularly helpful if you maintain a stable branch and
+want at the same time to credit the author, track changes, merge the fix,
+and protect the submitter from complaints. Note that under no circumstances
+can you change the author's identity (the From header), as it is the one
+which appears in the changelog.
+
+Special note to back-porters: It seems to be a common and useful practise
+to insert an indication of the origin of a patch at the top of the commit
+message (just after the subject line) to facilitate tracking. For instance,
+here's what we see in 2.6-stable :
+
+ Date: Tue May 13 19:10:30 2008 +0000
+
+ SCSI: libiscsi regression in 2.6.25: fix nop timer handling
+
+ commit 4cf1043593db6a337f10e006c23c69e5fc93e722 upstream
+
+And here's what appears in 2.4 :
+
+ Date: Tue May 13 22:12:27 2008 +0200
+
+ wireless, airo: waitbusy() won't delay
+
+ [backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a]
+
+Whatever the format, this information provides a valuable help to people
+tracking your trees, and to people trying to trouble-shoot bugs in your
+tree.
+
13) When to use Acked-by: and Cc:
diff --git a/Documentation/accounting/taskstats-struct.txt b/Documentation/accounting/taskstats-struct.txt
index 8aa7529..cd784f4 100644
--- a/Documentation/accounting/taskstats-struct.txt
+++ b/Documentation/accounting/taskstats-struct.txt
@@ -24,6 +24,8 @@
4) Per-task and per-thread context switch count statistics
+5) Time accounting for SMT machines
+
Future extension should add fields to the end of the taskstats struct, and
should not change the relative position of each field within the struct.
@@ -164,4 +166,8 @@
__u64 nvcsw; /* Context voluntary switch counter */
__u64 nivcsw; /* Context involuntary switch counter */
+5) Time accounting for SMT machines
+ __u64 ac_utimescaled; /* utime scaled on frequency etc */
+ __u64 ac_stimescaled; /* stime scaled on frequency etc */
+ __u64 cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
}
diff --git a/Documentation/auxdisplay/cfag12864b b/Documentation/auxdisplay/cfag12864b
index b714183..eb7be39 100644
--- a/Documentation/auxdisplay/cfag12864b
+++ b/Documentation/auxdisplay/cfag12864b
@@ -3,7 +3,7 @@
===================================
License: GPLv2
-Author & Maintainer: Miguel Ojeda Sandonis <maxextreme@gmail.com>
+Author & Maintainer: Miguel Ojeda Sandonis
Date: 2006-10-27
@@ -22,7 +22,7 @@
1. DRIVER INFORMATION
---------------------
-This driver support one cfag12864b display at time.
+This driver supports a cfag12864b LCD.
---------------------
diff --git a/Documentation/auxdisplay/cfag12864b-example.c b/Documentation/auxdisplay/cfag12864b-example.c
index 7bfac35..2caeea5 100644
--- a/Documentation/auxdisplay/cfag12864b-example.c
+++ b/Documentation/auxdisplay/cfag12864b-example.c
@@ -4,7 +4,7 @@
* Description: cfag12864b LCD userspace example program
* License: GPLv2
*
- * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ * Author: Copyright (C) Miguel Ojeda Sandonis
* Date: 2006-10-31
*
* This program is free software; you can redistribute it and/or modify
diff --git a/Documentation/auxdisplay/ks0108 b/Documentation/auxdisplay/ks0108
index 92b03b6..8ddda0c 100644
--- a/Documentation/auxdisplay/ks0108
+++ b/Documentation/auxdisplay/ks0108
@@ -3,7 +3,7 @@
==========================================
License: GPLv2
-Author & Maintainer: Miguel Ojeda Sandonis <maxextreme@gmail.com>
+Author & Maintainer: Miguel Ojeda Sandonis
Date: 2006-10-27
@@ -21,7 +21,7 @@
1. DRIVER INFORMATION
---------------------
-This driver support the ks0108 LCD controller.
+This driver supports the ks0108 LCD controller.
---------------------
diff --git a/Documentation/block/data-integrity.txt b/Documentation/block/data-integrity.txt
new file mode 100644
index 0000000..e9dc8d8
--- /dev/null
+++ b/Documentation/block/data-integrity.txt
@@ -0,0 +1,327 @@
+----------------------------------------------------------------------
+1. INTRODUCTION
+
+Modern filesystems feature checksumming of data and metadata to
+protect against data corruption. However, the detection of the
+corruption is done at read time which could potentially be months
+after the data was written. At that point the original data that the
+application tried to write is most likely lost.
+
+The solution is to ensure that the disk is actually storing what the
+application meant it to. Recent additions to both the SCSI family
+protocols (SBC Data Integrity Field, SCC protection proposal) as well
+as SATA/T13 (External Path Protection) try to remedy this by adding
+support for appending integrity metadata to an I/O. The integrity
+metadata (or protection information in SCSI terminology) includes a
+checksum for each sector as well as an incrementing counter that
+ensures the individual sectors are written in the right order. And
+for some protection schemes also that the I/O is written to the right
+place on disk.
+
+Current storage controllers and devices implement various protective
+measures, for instance checksumming and scrubbing. But these
+technologies are working in their own isolated domains or at best
+between adjacent nodes in the I/O path. The interesting thing about
+DIF and the other integrity extensions is that the protection format
+is well defined and every node in the I/O path can verify the
+integrity of the I/O and reject it if corruption is detected. This
+allows not only corruption prevention but also isolation of the point
+of failure.
+
+----------------------------------------------------------------------
+2. THE DATA INTEGRITY EXTENSIONS
+
+As written, the protocol extensions only protect the path between
+controller and storage device. However, many controllers actually
+allow the operating system to interact with the integrity metadata
+(IMD). We have been working with several FC/SAS HBA vendors to enable
+the protection information to be transferred to and from their
+controllers.
+
+The SCSI Data Integrity Field works by appending 8 bytes of protection
+information to each sector. The data + integrity metadata is stored
+in 520 byte sectors on disk. Data + IMD are interleaved when
+transferred between the controller and target. The T13 proposal is
+similar.
+
+Because it is highly inconvenient for operating systems to deal with
+520 (and 4104) byte sectors, we approached several HBA vendors and
+encouraged them to allow separation of the data and integrity metadata
+scatter-gather lists.
+
+The controller will interleave the buffers on write and split them on
+read. This means that the Linux can DMA the data buffers to and from
+host memory without changes to the page cache.
+
+Also, the 16-bit CRC checksum mandated by both the SCSI and SATA specs
+is somewhat heavy to compute in software. Benchmarks found that
+calculating this checksum had a significant impact on system
+performance for a number of workloads. Some controllers allow a
+lighter-weight checksum to be used when interfacing with the operating
+system. Emulex, for instance, supports the TCP/IP checksum instead.
+The IP checksum received from the OS is converted to the 16-bit CRC
+when writing and vice versa. This allows the integrity metadata to be
+generated by Linux or the application at very low cost (comparable to
+software RAID5).
+
+The IP checksum is weaker than the CRC in terms of detecting bit
+errors. However, the strength is really in the separation of the data
+buffers and the integrity metadata. These two distinct buffers much
+match up for an I/O to complete.
+
+The separation of the data and integrity metadata buffers as well as
+the choice in checksums is referred to as the Data Integrity
+Extensions. As these extensions are outside the scope of the protocol
+bodies (T10, T13), Oracle and its partners are trying to standardize
+them within the Storage Networking Industry Association.
+
+----------------------------------------------------------------------
+3. KERNEL CHANGES
+
+The data integrity framework in Linux enables protection information
+to be pinned to I/Os and sent to/received from controllers that
+support it.
+
+The advantage to the integrity extensions in SCSI and SATA is that
+they enable us to protect the entire path from application to storage
+device. However, at the same time this is also the biggest
+disadvantage. It means that the protection information must be in a
+format that can be understood by the disk.
+
+Generally Linux/POSIX applications are agnostic to the intricacies of
+the storage devices they are accessing. The virtual filesystem switch
+and the block layer make things like hardware sector size and
+transport protocols completely transparent to the application.
+
+However, this level of detail is required when preparing the
+protection information to send to a disk. Consequently, the very
+concept of an end-to-end protection scheme is a layering violation.
+It is completely unreasonable for an application to be aware whether
+it is accessing a SCSI or SATA disk.
+
+The data integrity support implemented in Linux attempts to hide this
+from the application. As far as the application (and to some extent
+the kernel) is concerned, the integrity metadata is opaque information
+that's attached to the I/O.
+
+The current implementation allows the block layer to automatically
+generate the protection information for any I/O. Eventually the
+intent is to move the integrity metadata calculation to userspace for
+user data. Metadata and other I/O that originates within the kernel
+will still use the automatic generation interface.
+
+Some storage devices allow each hardware sector to be tagged with a
+16-bit value. The owner of this tag space is the owner of the block
+device. I.e. the filesystem in most cases. The filesystem can use
+this extra space to tag sectors as they see fit. Because the tag
+space is limited, the block interface allows tagging bigger chunks by
+way of interleaving. This way, 8*16 bits of information can be
+attached to a typical 4KB filesystem block.
+
+This also means that applications such as fsck and mkfs will need
+access to manipulate the tags from user space. A passthrough
+interface for this is being worked on.
+
+
+----------------------------------------------------------------------
+4. BLOCK LAYER IMPLEMENTATION DETAILS
+
+4.1 BIO
+
+The data integrity patches add a new field to struct bio when
+CONFIG_BLK_DEV_INTEGRITY is enabled. bio->bi_integrity is a pointer
+to a struct bip which contains the bio integrity payload. Essentially
+a bip is a trimmed down struct bio which holds a bio_vec containing
+the integrity metadata and the required housekeeping information (bvec
+pool, vector count, etc.)
+
+A kernel subsystem can enable data integrity protection on a bio by
+calling bio_integrity_alloc(bio). This will allocate and attach the
+bip to the bio.
+
+Individual pages containing integrity metadata can subsequently be
+attached using bio_integrity_add_page().
+
+bio_free() will automatically free the bip.
+
+
+4.2 BLOCK DEVICE
+
+Because the format of the protection data is tied to the physical
+disk, each block device has been extended with a block integrity
+profile (struct blk_integrity). This optional profile is registered
+with the block layer using blk_integrity_register().
+
+The profile contains callback functions for generating and verifying
+the protection data, as well as getting and setting application tags.
+The profile also contains a few constants to aid in completing,
+merging and splitting the integrity metadata.
+
+Layered block devices will need to pick a profile that's appropriate
+for all subdevices. blk_integrity_compare() can help with that. DM
+and MD linear, RAID0 and RAID1 are currently supported. RAID4/5/6
+will require extra work due to the application tag.
+
+
+----------------------------------------------------------------------
+5.0 BLOCK LAYER INTEGRITY API
+
+5.1 NORMAL FILESYSTEM
+
+ The normal filesystem is unaware that the underlying block device
+ is capable of sending/receiving integrity metadata. The IMD will
+ be automatically generated by the block layer at submit_bio() time
+ in case of a WRITE. A READ request will cause the I/O integrity
+ to be verified upon completion.
+
+ IMD generation and verification can be toggled using the
+
+ /sys/block/<bdev>/integrity/write_generate
+
+ and
+
+ /sys/block/<bdev>/integrity/read_verify
+
+ flags.
+
+
+5.2 INTEGRITY-AWARE FILESYSTEM
+
+ A filesystem that is integrity-aware can prepare I/Os with IMD
+ attached. It can also use the application tag space if this is
+ supported by the block device.
+
+
+ int bdev_integrity_enabled(block_device, int rw);
+
+ bdev_integrity_enabled() will return 1 if the block device
+ supports integrity metadata transfer for the data direction
+ specified in 'rw'.
+
+ bdev_integrity_enabled() honors the write_generate and
+ read_verify flags in sysfs and will respond accordingly.
+
+
+ int bio_integrity_prep(bio);
+
+ To generate IMD for WRITE and to set up buffers for READ, the
+ filesystem must call bio_integrity_prep(bio).
+
+ Prior to calling this function, the bio data direction and start
+ sector must be set, and the bio should have all data pages
+ added. It is up to the caller to ensure that the bio does not
+ change while I/O is in progress.
+
+ bio_integrity_prep() should only be called if
+ bio_integrity_enabled() returned 1.
+
+
+ int bio_integrity_tag_size(bio);
+
+ If the filesystem wants to use the application tag space it will
+ first have to find out how much storage space is available.
+ Because tag space is generally limited (usually 2 bytes per
+ sector regardless of sector size), the integrity framework
+ supports interleaving the information between the sectors in an
+ I/O.
+
+ Filesystems can call bio_integrity_tag_size(bio) to find out how
+ many bytes of storage are available for that particular bio.
+
+ Another option is bdev_get_tag_size(block_device) which will
+ return the number of available bytes per hardware sector.
+
+
+ int bio_integrity_set_tag(bio, void *tag_buf, len);
+
+ After a successful return from bio_integrity_prep(),
+ bio_integrity_set_tag() can be used to attach an opaque tag
+ buffer to a bio. Obviously this only makes sense if the I/O is
+ a WRITE.
+
+
+ int bio_integrity_get_tag(bio, void *tag_buf, len);
+
+ Similarly, at READ I/O completion time the filesystem can
+ retrieve the tag buffer using bio_integrity_get_tag().
+
+
+6.3 PASSING EXISTING INTEGRITY METADATA
+
+ Filesystems that either generate their own integrity metadata or
+ are capable of transferring IMD from user space can use the
+ following calls:
+
+
+ struct bip * bio_integrity_alloc(bio, gfp_mask, nr_pages);
+
+ Allocates the bio integrity payload and hangs it off of the bio.
+ nr_pages indicate how many pages of protection data need to be
+ stored in the integrity bio_vec list (similar to bio_alloc()).
+
+ The integrity payload will be freed at bio_free() time.
+
+
+ int bio_integrity_add_page(bio, page, len, offset);
+
+ Attaches a page containing integrity metadata to an existing
+ bio. The bio must have an existing bip,
+ i.e. bio_integrity_alloc() must have been called. For a WRITE,
+ the integrity metadata in the pages must be in a format
+ understood by the target device with the notable exception that
+ the sector numbers will be remapped as the request traverses the
+ I/O stack. This implies that the pages added using this call
+ will be modified during I/O! The first reference tag in the
+ integrity metadata must have a value of bip->bip_sector.
+
+ Pages can be added using bio_integrity_add_page() as long as
+ there is room in the bip bio_vec array (nr_pages).
+
+ Upon completion of a READ operation, the attached pages will
+ contain the integrity metadata received from the storage device.
+ It is up to the receiver to process them and verify data
+ integrity upon completion.
+
+
+6.4 REGISTERING A BLOCK DEVICE AS CAPABLE OF EXCHANGING INTEGRITY
+ METADATA
+
+ To enable integrity exchange on a block device the gendisk must be
+ registered as capable:
+
+ int blk_integrity_register(gendisk, blk_integrity);
+
+ The blk_integrity struct is a template and should contain the
+ following:
+
+ static struct blk_integrity my_profile = {
+ .name = "STANDARDSBODY-TYPE-VARIANT-CSUM",
+ .generate_fn = my_generate_fn,
+ .verify_fn = my_verify_fn,
+ .get_tag_fn = my_get_tag_fn,
+ .set_tag_fn = my_set_tag_fn,
+ .tuple_size = sizeof(struct my_tuple_size),
+ .tag_size = <tag bytes per hw sector>,
+ };
+
+ 'name' is a text string which will be visible in sysfs. This is
+ part of the userland API so chose it carefully and never change
+ it. The format is standards body-type-variant.
+ E.g. T10-DIF-TYPE1-IP or T13-EPP-0-CRC.
+
+ 'generate_fn' generates appropriate integrity metadata (for WRITE).
+
+ 'verify_fn' verifies that the data buffer matches the integrity
+ metadata.
+
+ 'tuple_size' must be set to match the size of the integrity
+ metadata per sector. I.e. 8 for DIF and EPP.
+
+ 'tag_size' must be set to identify how many bytes of tag space
+ are available per hardware sector. For DIF this is either 2 or
+ 0 depending on the value of the Control Mode Page ATO bit.
+
+ See 6.2 for a description of get_tag_fn and set_tag_fn.
+
+----------------------------------------------------------------------
+2007-12-24 Martin K. Petersen <martin.petersen@oracle.com>
diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt
index e65736c..63e59b8 100644
--- a/Documentation/cciss.txt
+++ b/Documentation/cciss.txt
@@ -21,6 +21,11 @@
* SA E200
* SA E200i
* SA E500
+ * SA P212
+ * SA P410
+ * SA P410i
+ * SA P411
+ * SA P812
Detecting drive failures:
-------------------------
diff --git a/Documentation/cgroups.txt b/Documentation/cgroups.txt
index 824fc02..d9014aa 100644
--- a/Documentation/cgroups.txt
+++ b/Documentation/cgroups.txt
@@ -390,6 +390,10 @@
...
# /bin/echo PIDn > tasks
+You can attach the current shell task by echoing 0:
+
+# echo 0 > tasks
+
3. Kernel API
=============
diff --git a/Documentation/controllers/devices.txt b/Documentation/controllers/devices.txt
index 4dcea42..7cc6e6a 100644
--- a/Documentation/controllers/devices.txt
+++ b/Documentation/controllers/devices.txt
@@ -13,7 +13,7 @@
The root device cgroup starts with rwm to 'all'. A child device
cgroup gets a copy of the parent. Administrators can then remove
devices from the whitelist or add new entries. A child cgroup can
-never receive a device access which is denied its parent. However
+never receive a device access which is denied by its parent. However
when a device access is removed from a parent it will not also be
removed from the child(ren).
@@ -29,7 +29,11 @@
echo a > /cgroups/1/devices.deny
-will remove the default 'a *:* mrw' entry.
+will remove the default 'a *:* rwm' entry. Doing
+
+ echo a > /cgroups/1/devices.allow
+
+will add the 'a *:* rwm' entry to the whitelist.
3. Security
diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt
index fb7b361..1f5a924 100644
--- a/Documentation/cpusets.txt
+++ b/Documentation/cpusets.txt
@@ -154,13 +154,15 @@
new system calls are added for cpusets - all support for querying and
modifying cpusets is via this cpuset file system.
-The /proc/<pid>/status file for each task has two added lines,
+The /proc/<pid>/status file for each task has four added lines,
displaying the tasks cpus_allowed (on which CPUs it may be scheduled)
and mems_allowed (on which Memory Nodes it may obtain memory),
-in the format seen in the following example:
+in the two formats seen in the following example:
Cpus_allowed: ffffffff,ffffffff,ffffffff,ffffffff
+ Cpus_allowed_list: 0-127
Mems_allowed: ffffffff,ffffffff
+ Mems_allowed_list: 0-63
Each cpuset is represented by a directory in the cgroup file system
containing (on top of the standard cgroup files) the following
@@ -199,7 +201,7 @@
The following rules apply to each cpuset:
- Its CPUs and Memory Nodes must be a subset of its parents.
- - It can only be marked exclusive if its parent is.
+ - It can't be marked exclusive unless its parent is.
- If its cpu or memory is exclusive, they may not overlap any sibling.
These rules, and the natural hierarchy of cpusets, enable efficient
@@ -345,7 +347,7 @@
flag, and if set, a call to a new routine cpuset_mem_spread_node()
returns the node to prefer for the allocation.
-Similarly, setting 'memory_spread_cache' turns on the flag
+Similarly, setting 'memory_spread_slab' turns on the flag
PF_SPREAD_SLAB, and appropriately marked slab caches will allocate
pages from the node returned by cpuset_mem_spread_node().
@@ -542,7 +544,10 @@
2 : search cores in a package.
3 : search cpus in a node [= system wide on non-NUMA system]
( 4 : search nodes in a chunk of node [on NUMA system] )
- ( 5~ : search system wide [on NUMA system])
+ ( 5 : search system wide [on NUMA system] )
+
+The system default is architecture dependent. The system default
+can be changed using the relax_domain_level= boot parameter.
This file is per-cpuset and affect the sched domain where the cpuset
belongs to. Therefore if the flag 'sched_load_balance' of a cpuset
@@ -709,7 +714,10 @@
In this directory you can find several files:
# ls
-cpus cpu_exclusive mems mem_exclusive mem_hardwall tasks
+cpu_exclusive memory_migrate mems tasks
+cpus memory_pressure notify_on_release
+mem_exclusive memory_spread_page sched_load_balance
+mem_hardwall memory_spread_slab sched_relax_domain_level
Reading them will give you information about the state of this cpuset:
the CPUs and Memory Nodes it can use, the processes that are using
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 5b3f31f..46ece3f 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -312,3 +312,12 @@
Why: Implementation became generic; users should now include
linux/semaphore.h instead.
Who: Matthew Wilcox <willy@linux.intel.com>
+
+---------------------------
+
+What: CONFIG_THERMAL_HWMON
+When: January 2009
+Why: This option was introduced just to allow older lm-sensors userspace
+ to keep working over the upgrade to 2.6.26. At the scheduled time of
+ removal fixed lm-sensors (2.x or 3.x) should be readily available.
+Who: Rene Herman <rene.herman@gmail.com>
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 560f88d..0c5086db 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -139,8 +139,16 @@
Setting it to very large values will improve
performance.
-barrier=1 This enables/disables barriers. barrier=0 disables
- it, barrier=1 enables it.
+barrier=<0|1(*)> This enables/disables the use of write barriers in
+ the jbd code. barrier=0 disables, barrier=1 enables.
+ This also requires an IO stack which can support
+ barriers, and if jbd gets an error on a barrier
+ write, it will disable again with a warning.
+ Write barriers enforce proper on-disk ordering
+ of journal commits, making volatile disk write caches
+ safe to use, at some performance penalty. If
+ your disks are battery-backed in one way or another,
+ disabling barriers may safely improve performance.
orlov (*) This enables the new Orlov block allocator. It is
enabled by default.
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index 5daa2aa..68ef488 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -36,6 +36,7 @@
local_cpus nearby CPU mask (cpumask, ro)
resource PCI resource host addresses (ascii, ro)
resource0..N PCI resource N, if present (binary, mmap)
+ resource0_wc..N_wc PCI WC map resource N, if prefetchable (binary, mmap)
rom PCI ROM resource, if present (binary, ro)
subsystem_device PCI subsystem device (ascii, ro)
subsystem_vendor PCI subsystem vendor (ascii, ro)
diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt
new file mode 100644
index 0000000..13e4bf0
--- /dev/null
+++ b/Documentation/ftrace.txt
@@ -0,0 +1,1353 @@
+ ftrace - Function Tracer
+ ========================
+
+Copyright 2008 Red Hat Inc.
+Author: Steven Rostedt <srostedt@redhat.com>
+
+
+Introduction
+------------
+
+Ftrace is an internal tracer designed to help out developers and
+designers of systems to find what is going on inside the kernel.
+It can be used for debugging or analyzing latencies and performance
+issues that take place outside of user-space.
+
+Although ftrace is the function tracer, it also includes an
+infrastructure that allows for other types of tracing. Some of the
+tracers that are currently in ftrace is a tracer to trace
+context switches, the time it takes for a high priority task to
+run after it was woken up, the time interrupts are disabled, and
+more.
+
+
+The File System
+---------------
+
+Ftrace uses the debugfs file system to hold the control files as well
+as the files to display output.
+
+To mount the debugfs system:
+
+ # mkdir /debug
+ # mount -t debugfs nodev /debug
+
+
+That's it! (assuming that you have ftrace configured into your kernel)
+
+After mounting the debugfs, you can see a directory called
+"tracing". This directory contains the control and output files
+of ftrace. Here is a list of some of the key files:
+
+
+ Note: all time values are in microseconds.
+
+ current_tracer : This is used to set or display the current tracer
+ that is configured.
+
+ available_tracers : This holds the different types of tracers that
+ has been compiled into the kernel. The tracers
+ listed here can be configured by echoing in their
+ name into current_tracer.
+
+ tracing_enabled : This sets or displays whether the current_tracer
+ is activated and tracing or not. Echo 0 into this
+ file to disable the tracer or 1 (or non-zero) to
+ enable it.
+
+ trace : This file holds the output of the trace in a human readable
+ format.
+
+ latency_trace : This file shows the same trace but the information
+ is organized more to display possible latencies
+ in the system.
+
+ trace_pipe : The output is the same as the "trace" file but this
+ file is meant to be streamed with live tracing.
+ Reads from this file will block until new data
+ is retrieved. Unlike the "trace" and "latency_trace"
+ files, this file is a consumer. This means reading
+ from this file causes sequential reads to display
+ more current data. Once data is read from this
+ file, it is consumed, and will not be read
+ again with a sequential read. The "trace" and
+ "latency_trace" files are static, and if the
+ tracer isn't adding more data, they will display
+ the same information every time they are read.
+
+ iter_ctrl : This file lets the user control the amount of data
+ that is displayed in one of the above output
+ files.
+
+ trace_max_latency : Some of the tracers record the max latency.
+ For example, the time interrupts are disabled.
+ This time is saved in this file. The max trace
+ will also be stored, and displayed by either
+ "trace" or "latency_trace". A new max trace will
+ only be recorded if the latency is greater than
+ the value in this file. (in microseconds)
+
+ trace_entries : This sets or displays the number of trace
+ entries each CPU buffer can hold. The tracer buffers
+ are the same size for each CPU, so care must be
+ taken when modifying the trace_entries. The number
+ of actually entries will be the number given
+ times the number of possible CPUS. The buffers
+ are saved as individual pages, and the actual entries
+ will always be rounded up to entries per page.
+
+ This can only be updated when the current_tracer
+ is set to "none".
+
+ NOTE: It is planned on changing the allocated buffers
+ from being the number of possible CPUS to
+ the number of online CPUS.
+
+ tracing_cpumask : This is a mask that lets the user only trace
+ on specified CPUS. The format is a hex string
+ representing the CPUS.
+
+ set_ftrace_filter : When dynamic ftrace is configured in, the
+ code is dynamically modified to disable calling
+ of the function profiler (mcount). This lets
+ tracing be configured in with practically no overhead
+ in performance. This also has a side effect of
+ enabling or disabling specific functions to be
+ traced. Echoing in names of functions into this
+ file will limit the trace to only those files.
+
+ set_ftrace_notrace: This has the opposite effect that
+ set_ftrace_filter has. Any function that is added
+ here will not be traced. If a function exists
+ in both set_ftrace_filter and set_ftrace_notrace
+ the function will _not_ bet traced.
+
+ available_filter_functions : When a function is encountered the first
+ time by the dynamic tracer, it is recorded and
+ later the call is converted into a nop. This file
+ lists the functions that have been recorded
+ by the dynamic tracer and these functions can
+ be used to set the ftrace filter by the above
+ "set_ftrace_filter" file.
+
+
+The Tracers
+-----------
+
+Here are the list of current tracers that can be configured.
+
+ ftrace - function tracer that uses mcount to trace all functions.
+ It is possible to filter out which functions that are
+ traced when dynamic ftrace is configured in.
+
+ sched_switch - traces the context switches between tasks.
+
+ irqsoff - traces the areas that disable interrupts and saves off
+ the trace with the longest max latency.
+ See tracing_max_latency. When a new max is recorded,
+ it replaces the old trace. It is best to view this
+ trace with the latency_trace file.
+
+ preemptoff - Similar to irqsoff but traces and records the time
+ preemption is disabled.
+
+ preemptirqsoff - Similar to irqsoff and preemptoff, but traces and
+ records the largest time irqs and/or preemption is
+ disabled.
+
+ wakeup - Traces and records the max latency that it takes for
+ the highest priority task to get scheduled after
+ it has been woken up.
+
+ none - This is not a tracer. To remove all tracers from tracing
+ simply echo "none" into current_tracer.
+
+
+Examples of using the tracer
+----------------------------
+
+Here are typical examples of using the tracers with only controlling
+them with the debugfs interface (without using any user-land utilities).
+
+Output format:
+--------------
+
+Here's an example of the output format of the file "trace"
+
+ --------
+# tracer: ftrace
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ bash-4251 [01] 10152.583854: path_put <-path_walk
+ bash-4251 [01] 10152.583855: dput <-path_put
+ bash-4251 [01] 10152.583855: _atomic_dec_and_lock <-dput
+ --------
+
+A header is printed with the trace that is represented. In this case
+the tracer is "ftrace". Then a header showing the format. Task name
+"bash", the task PID "4251", the CPU that it was running on
+"01", the timestamp in <secs>.<usecs> format, the function name that was
+traced "path_put" and the parent function that called this function
+"path_walk".
+
+The sched_switch tracer also includes tracing of task wake ups and
+context switches.
+
+ ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 2916:115:S
+ ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 10:115:S
+ ksoftirqd/1-7 [01] 1453.070013: 7:115:R ==> 10:115:R
+ events/1-10 [01] 1453.070013: 10:115:S ==> 2916:115:R
+ kondemand/1-2916 [01] 1453.070013: 2916:115:S ==> 7:115:R
+ ksoftirqd/1-7 [01] 1453.070013: 7:115:S ==> 0:140:R
+
+Wake ups are represented by a "+" and the context switches show
+"==>". The format is:
+
+ Context switches:
+
+ Previous task Next Task
+
+ <pid>:<prio>:<state> ==> <pid>:<prio>:<state>
+
+ Wake ups:
+
+ Current task Task waking up
+
+ <pid>:<prio>:<state> + <pid>:<prio>:<state>
+
+The prio is the internal kernel priority, which is inverse to the
+priority that is usually displayed by user-space tools. Zero represents
+the highest priority (99). Prio 100 starts the "nice" priorities with
+100 being equal to nice -20 and 139 being nice 19. The prio "140" is
+reserved for the idle task which is the lowest priority thread (pid 0).
+
+
+Latency trace format
+--------------------
+
+For traces that display latency times, the latency_trace file gives
+a bit more information to see why a latency happened. Here's a typical
+trace.
+
+# tracer: irqsoff
+#
+irqsoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 97 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: apic_timer_interrupt
+ => ended at: do_softirq
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ <idle>-0 0d..1 0us+: trace_hardirqs_off_thunk (apic_timer_interrupt)
+ <idle>-0 0d.s. 97us : __do_softirq (do_softirq)
+ <idle>-0 0d.s1 98us : trace_hardirqs_on (do_softirq)
+
+
+vim:ft=help
+
+
+This shows that the current tracer is "irqsoff" tracing the time
+interrupts are disabled. It gives the trace version and the kernel
+this was executed on (2.6.26-rc8). Then it displays the max latency
+in microsecs (97 us). The number of trace entries displayed
+by the total number recorded (both are three: #3/3). The type of
+preemption that was used (PREEMPT). VP, KP, SP, and HP are always zero
+and reserved for later use. #P is the number of online CPUS (#P:2).
+
+The task is the process that was running when the latency happened.
+(swapper pid: 0).
+
+The start and stop that caused the latencies:
+
+ apic_timer_interrupt is where the interrupts were disabled.
+ do_softirq is where they were enabled again.
+
+The next lines after the header are the trace itself. The header
+explains which is which.
+
+ cmd: The name of the process in the trace.
+
+ pid: The PID of that process.
+
+ CPU#: The CPU that the process was running on.
+
+ irqs-off: 'd' interrupts are disabled. '.' otherwise.
+
+ need-resched: 'N' task need_resched is set, '.' otherwise.
+
+ hardirq/softirq:
+ 'H' - hard irq happened inside a softirq.
+ 'h' - hard irq is running
+ 's' - soft irq is running
+ '.' - normal context.
+
+ preempt-depth: The level of preempt_disabled
+
+The above is mostly meaningful for kernel developers.
+
+ time: This differs from the trace output where as the trace output
+ contained a absolute timestamp. This timestamp is relative
+ to the start of the first entry in the the trace.
+
+ delay: This is just to help catch your eye a bit better. And
+ needs to be fixed to be only relative to the same CPU.
+ The marks is determined by the difference between this
+ current trace and the next trace.
+ '!' - greater than preempt_mark_thresh (default 100)
+ '+' - greater than 1 microsecond
+ ' ' - less than or equal to 1 microsecond.
+
+ The rest is the same as the 'trace' file.
+
+
+iter_ctrl
+---------
+
+The iter_ctrl file is used to control what gets printed in the trace
+output. To see what is available, simply cat the file:
+
+ cat /debug/tracing/iter_ctrl
+ print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \
+ noblock nostacktrace nosched-tree
+
+To disable one of the options, echo in the option appended with "no".
+
+ echo noprint-parent > /debug/tracing/iter_ctrl
+
+To enable an option, leave off the "no".
+
+ echo sym-offest > /debug/tracing/iter_ctrl
+
+Here are the available options:
+
+ print-parent - On function traces, display the calling function
+ as well as the function being traced.
+
+ print-parent:
+ bash-4000 [01] 1477.606694: simple_strtoul <-strict_strtoul
+
+ noprint-parent:
+ bash-4000 [01] 1477.606694: simple_strtoul
+
+
+ sym-offset - Display not only the function name, but also the offset
+ in the function. For example, instead of seeing just
+ "ktime_get" you will see "ktime_get+0xb/0x20"
+
+ sym-offset:
+ bash-4000 [01] 1477.606694: simple_strtoul+0x6/0xa0
+
+ sym-addr - this will also display the function address as well as
+ the function name.
+
+ sym-addr:
+ bash-4000 [01] 1477.606694: simple_strtoul <c0339346>
+
+ verbose - This deals with the latency_trace file.
+
+ bash 4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \
+ (+0.000ms): simple_strtoul (strict_strtoul)
+
+ raw - This will display raw numbers. This option is best for use with
+ user applications that can translate the raw numbers better than
+ having it done in the kernel.
+
+ hex - similar to raw, but the numbers will be in a hexadecimal format.
+
+ bin - This will print out the formats in raw binary.
+
+ block - TBD (needs update)
+
+ stacktrace - This is one of the options that changes the trace itself.
+ When a trace is recorded, so is the stack of functions.
+ This allows for back traces of trace sites.
+
+ sched-tree - TBD (any users??)
+
+
+sched_switch
+------------
+
+This tracer simply records schedule switches. Here's an example
+on how to implement it.
+
+ # echo sched_switch > /debug/tracing/current_tracer
+ # echo 1 > /debug/tracing/tracing_enabled
+ # sleep 1
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/trace
+
+# tracer: sched_switch
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ bash-3997 [01] 240.132281: 3997:120:R + 4055:120:R
+ bash-3997 [01] 240.132284: 3997:120:R ==> 4055:120:R
+ sleep-4055 [01] 240.132371: 4055:120:S ==> 3997:120:R
+ bash-3997 [01] 240.132454: 3997:120:R + 4055:120:S
+ bash-3997 [01] 240.132457: 3997:120:R ==> 4055:120:R
+ sleep-4055 [01] 240.132460: 4055:120:D ==> 3997:120:R
+ bash-3997 [01] 240.132463: 3997:120:R + 4055:120:D
+ bash-3997 [01] 240.132465: 3997:120:R ==> 4055:120:R
+ <idle>-0 [00] 240.132589: 0:140:R + 4:115:S
+ <idle>-0 [00] 240.132591: 0:140:R ==> 4:115:R
+ ksoftirqd/0-4 [00] 240.132595: 4:115:S ==> 0:140:R
+ <idle>-0 [00] 240.132598: 0:140:R + 4:115:S
+ <idle>-0 [00] 240.132599: 0:140:R ==> 4:115:R
+ ksoftirqd/0-4 [00] 240.132603: 4:115:S ==> 0:140:R
+ sleep-4055 [01] 240.133058: 4055:120:S ==> 3997:120:R
+ [...]
+
+
+As we have discussed previously about this format, the header shows
+the name of the trace and points to the options. The "FUNCTION"
+is a misnomer since here it represents the wake ups and context
+switches.
+
+The sched_switch only lists the wake ups (represented with '+')
+and context switches ('==>') with the previous task or current
+first followed by the next task or task waking up. The format for both
+of these is PID:KERNEL-PRIO:TASK-STATE. Remember that the KERNEL-PRIO
+is the inverse of the actual priority with zero (0) being the highest
+priority and the nice values starting at 100 (nice -20). Below is
+a quick chart to map the kernel priority to user land priorities.
+
+ Kernel priority: 0 to 99 ==> user RT priority 99 to 0
+ Kernel priority: 100 to 139 ==> user nice -20 to 19
+ Kernel priority: 140 ==> idle task priority
+
+The task states are:
+
+ R - running : wants to run, may not actually be running
+ S - sleep : process is waiting to be woken up (handles signals)
+ D - deep sleep : process must be woken up (ignores signals)
+ T - stopped : process suspended
+ t - traced : process is being traced (with something like gdb)
+ Z - zombie : process waiting to be cleaned up
+ X - unknown
+
+
+ftrace_enabled
+--------------
+
+The following tracers give different output depending on whether
+or not the sysctl ftrace_enabled is set. To set ftrace_enabled,
+one can either use the sysctl function or set it via the proc
+file system interface.
+
+ sysctl kernel.ftrace_enabled=1
+
+ or
+
+ echo 1 > /proc/sys/kernel/ftrace_enabled
+
+To disable ftrace_enabled simply replace the '1' with '0' in
+the above commands.
+
+When ftrace_enabled is set the tracers will also record the functions
+that are within the trace. The descriptions of the tracers
+will also show an example with ftrace enabled.
+
+
+irqsoff
+-------
+
+When interrupts are disabled, the CPU can not react to any other
+external event (besides NMIs and SMIs). This prevents the timer
+interrupt from triggering or the mouse interrupt from letting the
+kernel know of a new mouse event. The result is a latency with the
+reaction time.
+
+The irqsoff tracer tracks the time interrupts are disabled and when
+they are re-enabled. When a new maximum latency is hit, it saves off
+the trace so that it may be retrieved at a later time. Every time a
+new maximum in reached, the old saved trace is discarded and the new
+trace is saved.
+
+To reset the maximum, echo 0 into tracing_max_latency. Here's an
+example:
+
+ # echo irqsoff > /debug/tracing/current_tracer
+ # echo 0 > /debug/tracing/tracing_max_latency
+ # echo 1 > /debug/tracing/tracing_enabled
+ # ls -ltr
+ [...]
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/latency_trace
+# tracer: irqsoff
+#
+irqsoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 6 us, #3/3, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: bash-4269 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: copy_page_range
+ => ended at: copy_page_range
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ bash-4269 1...1 0us+: _spin_lock (copy_page_range)
+ bash-4269 1...1 7us : _spin_unlock (copy_page_range)
+ bash-4269 1...2 7us : trace_preempt_on (copy_page_range)
+
+
+vim:ft=help
+
+Here we see that that we had a latency of 6 microsecs (which is
+very good). The spin_lock in copy_page_range disabled interrupts.
+The difference between the 6 and the displayed timestamp 7us is
+because the clock must have incremented between the time of recording
+the max latency and recording the function that had that latency.
+
+Note the above had ftrace_enabled not set. If we set the ftrace_enabled
+we get a much larger output:
+
+# tracer: irqsoff
+#
+irqsoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 50 us, #101/101, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: ls-4339 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: __alloc_pages_internal
+ => ended at: __alloc_pages_internal
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ ls-4339 0...1 0us+: get_page_from_freelist (__alloc_pages_internal)
+ ls-4339 0d..1 3us : rmqueue_bulk (get_page_from_freelist)
+ ls-4339 0d..1 3us : _spin_lock (rmqueue_bulk)
+ ls-4339 0d..1 4us : add_preempt_count (_spin_lock)
+ ls-4339 0d..2 4us : __rmqueue (rmqueue_bulk)
+ ls-4339 0d..2 5us : __rmqueue_smallest (__rmqueue)
+ ls-4339 0d..2 5us : __mod_zone_page_state (__rmqueue_smallest)
+ ls-4339 0d..2 6us : __rmqueue (rmqueue_bulk)
+ ls-4339 0d..2 6us : __rmqueue_smallest (__rmqueue)
+ ls-4339 0d..2 7us : __mod_zone_page_state (__rmqueue_smallest)
+ ls-4339 0d..2 7us : __rmqueue (rmqueue_bulk)
+ ls-4339 0d..2 8us : __rmqueue_smallest (__rmqueue)
+[...]
+ ls-4339 0d..2 46us : __rmqueue_smallest (__rmqueue)
+ ls-4339 0d..2 47us : __mod_zone_page_state (__rmqueue_smallest)
+ ls-4339 0d..2 47us : __rmqueue (rmqueue_bulk)
+ ls-4339 0d..2 48us : __rmqueue_smallest (__rmqueue)
+ ls-4339 0d..2 48us : __mod_zone_page_state (__rmqueue_smallest)
+ ls-4339 0d..2 49us : _spin_unlock (rmqueue_bulk)
+ ls-4339 0d..2 49us : sub_preempt_count (_spin_unlock)
+ ls-4339 0d..1 50us : get_page_from_freelist (__alloc_pages_internal)
+ ls-4339 0d..2 51us : trace_hardirqs_on (__alloc_pages_internal)
+
+
+vim:ft=help
+
+
+Here we traced a 50 microsecond latency. But we also see all the
+functions that were called during that time. Note that enabling
+function tracing we endure an added overhead. This overhead may
+extend the latency times. But never the less, this trace has provided
+some very helpful debugging.
+
+
+preemptoff
+----------
+
+When preemption is disabled we may be able to receive interrupts but
+the task can not be preempted and a higher priority task must wait
+for preemption to be enabled again before it can preempt a lower
+priority task.
+
+The preemptoff tracer traces the places that disables preemption.
+Like the irqsoff, it records the maximum latency that preemption
+was disabled. The control of preemptoff is much like the irqsoff.
+
+ # echo preemptoff > /debug/tracing/current_tracer
+ # echo 0 > /debug/tracing/tracing_max_latency
+ # echo 1 > /debug/tracing/tracing_enabled
+ # ls -ltr
+ [...]
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/latency_trace
+# tracer: preemptoff
+#
+preemptoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 29 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: do_IRQ
+ => ended at: __do_softirq
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ sshd-4261 0d.h. 0us+: irq_enter (do_IRQ)
+ sshd-4261 0d.s. 29us : _local_bh_enable (__do_softirq)
+ sshd-4261 0d.s1 30us : trace_preempt_on (__do_softirq)
+
+
+vim:ft=help
+
+This has some more changes. Preemption was disabled when an interrupt
+came in (notice the 'h'), and was enabled while doing a softirq.
+(notice the 's'). But we also see that interrupts have been disabled
+when entering the preempt off section and leaving it (the 'd').
+We do not know if interrupts were enabled in the mean time.
+
+# tracer: preemptoff
+#
+preemptoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 63 us, #87/87, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: remove_wait_queue
+ => ended at: __do_softirq
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ sshd-4261 0d..1 0us : _spin_lock_irqsave (remove_wait_queue)
+ sshd-4261 0d..1 1us : _spin_unlock_irqrestore (remove_wait_queue)
+ sshd-4261 0d..1 2us : do_IRQ (common_interrupt)
+ sshd-4261 0d..1 2us : irq_enter (do_IRQ)
+ sshd-4261 0d..1 2us : idle_cpu (irq_enter)
+ sshd-4261 0d..1 3us : add_preempt_count (irq_enter)
+ sshd-4261 0d.h1 3us : idle_cpu (irq_enter)
+ sshd-4261 0d.h. 4us : handle_fasteoi_irq (do_IRQ)
+[...]
+ sshd-4261 0d.h. 12us : add_preempt_count (_spin_lock)
+ sshd-4261 0d.h1 12us : ack_ioapic_quirk_irq (handle_fasteoi_irq)
+ sshd-4261 0d.h1 13us : move_native_irq (ack_ioapic_quirk_irq)
+ sshd-4261 0d.h1 13us : _spin_unlock (handle_fasteoi_irq)
+ sshd-4261 0d.h1 14us : sub_preempt_count (_spin_unlock)
+ sshd-4261 0d.h1 14us : irq_exit (do_IRQ)
+ sshd-4261 0d.h1 15us : sub_preempt_count (irq_exit)
+ sshd-4261 0d..2 15us : do_softirq (irq_exit)
+ sshd-4261 0d... 15us : __do_softirq (do_softirq)
+ sshd-4261 0d... 16us : __local_bh_disable (__do_softirq)
+ sshd-4261 0d... 16us+: add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s4 20us : add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s4 21us : sub_preempt_count (local_bh_enable)
+ sshd-4261 0d.s5 21us : sub_preempt_count (local_bh_enable)
+[...]
+ sshd-4261 0d.s6 41us : add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s6 42us : sub_preempt_count (local_bh_enable)
+ sshd-4261 0d.s7 42us : sub_preempt_count (local_bh_enable)
+ sshd-4261 0d.s5 43us : add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s5 43us : sub_preempt_count (local_bh_enable_ip)
+ sshd-4261 0d.s6 44us : sub_preempt_count (local_bh_enable_ip)
+ sshd-4261 0d.s5 44us : add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s5 45us : sub_preempt_count (local_bh_enable)
+[...]
+ sshd-4261 0d.s. 63us : _local_bh_enable (__do_softirq)
+ sshd-4261 0d.s1 64us : trace_preempt_on (__do_softirq)
+
+
+The above is an example of the preemptoff trace with ftrace_enabled
+set. Here we see that interrupts were disabled the entire time.
+The irq_enter code lets us know that we entered an interrupt 'h'.
+Before that, the functions being traced still show that it is not
+in an interrupt, but we can see by the functions themselves that
+this is not the case.
+
+Notice that the __do_softirq when called doesn't have a preempt_count.
+It may seem that we missed a preempt enabled. What really happened
+is that the preempt count is held on the threads stack and we
+switched to the softirq stack (4K stacks in effect). The code
+does not copy the preempt count, but because interrupts are disabled
+we don't need to worry about it. Having a tracer like this is good
+to let people know what really happens inside the kernel.
+
+
+preemptirqsoff
+--------------
+
+Knowing the locations that have interrupts disabled or preemption
+disabled for the longest times is helpful. But sometimes we would
+like to know when either preemption and/or interrupts are disabled.
+
+The following code:
+
+ local_irq_disable();
+ call_function_with_irqs_off();
+ preempt_disable();
+ call_function_with_irqs_and_preemption_off();
+ local_irq_enable();
+ call_function_with_preemption_off();
+ preempt_enable();
+
+The irqsoff tracer will record the total length of
+call_function_with_irqs_off() and
+call_function_with_irqs_and_preemption_off().
+
+The preemptoff tracer will record the total length of
+call_function_with_irqs_and_preemption_off() and
+call_function_with_preemption_off().
+
+But neither will trace the time that interrupts and/or preemption
+is disabled. This total time is the time that we can not schedule.
+To record this time, use the preemptirqsoff tracer.
+
+Again, using this trace is much like the irqsoff and preemptoff tracers.
+
+ # echo preemptoff > /debug/tracing/current_tracer
+ # echo 0 > /debug/tracing/tracing_max_latency
+ # echo 1 > /debug/tracing/tracing_enabled
+ # ls -ltr
+ [...]
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/latency_trace
+# tracer: preemptirqsoff
+#
+preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 293 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: ls-4860 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: apic_timer_interrupt
+ => ended at: __do_softirq
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ ls-4860 0d... 0us!: trace_hardirqs_off_thunk (apic_timer_interrupt)
+ ls-4860 0d.s. 294us : _local_bh_enable (__do_softirq)
+ ls-4860 0d.s1 294us : trace_preempt_on (__do_softirq)
+
+
+vim:ft=help
+
+
+The trace_hardirqs_off_thunk is called from assembly on x86 when
+interrupts are disabled in the assembly code. Without the function
+tracing, we don't know if interrupts were enabled within the preemption
+points. We do see that it started with preemption enabled.
+
+Here is a trace with ftrace_enabled set:
+
+
+# tracer: preemptirqsoff
+#
+preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 105 us, #183/183, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: write_chan
+ => ended at: __do_softirq
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ ls-4473 0.N.. 0us : preempt_schedule (write_chan)
+ ls-4473 0dN.1 1us : _spin_lock (schedule)
+ ls-4473 0dN.1 2us : add_preempt_count (_spin_lock)
+ ls-4473 0d..2 2us : put_prev_task_fair (schedule)
+[...]
+ ls-4473 0d..2 13us : set_normalized_timespec (ktime_get_ts)
+ ls-4473 0d..2 13us : __switch_to (schedule)
+ sshd-4261 0d..2 14us : finish_task_switch (schedule)
+ sshd-4261 0d..2 14us : _spin_unlock_irq (finish_task_switch)
+ sshd-4261 0d..1 15us : add_preempt_count (_spin_lock_irqsave)
+ sshd-4261 0d..2 16us : _spin_unlock_irqrestore (hrtick_set)
+ sshd-4261 0d..2 16us : do_IRQ (common_interrupt)
+ sshd-4261 0d..2 17us : irq_enter (do_IRQ)
+ sshd-4261 0d..2 17us : idle_cpu (irq_enter)
+ sshd-4261 0d..2 18us : add_preempt_count (irq_enter)
+ sshd-4261 0d.h2 18us : idle_cpu (irq_enter)
+ sshd-4261 0d.h. 18us : handle_fasteoi_irq (do_IRQ)
+ sshd-4261 0d.h. 19us : _spin_lock (handle_fasteoi_irq)
+ sshd-4261 0d.h. 19us : add_preempt_count (_spin_lock)
+ sshd-4261 0d.h1 20us : _spin_unlock (handle_fasteoi_irq)
+ sshd-4261 0d.h1 20us : sub_preempt_count (_spin_unlock)
+[...]
+ sshd-4261 0d.h1 28us : _spin_unlock (handle_fasteoi_irq)
+ sshd-4261 0d.h1 29us : sub_preempt_count (_spin_unlock)
+ sshd-4261 0d.h2 29us : irq_exit (do_IRQ)
+ sshd-4261 0d.h2 29us : sub_preempt_count (irq_exit)
+ sshd-4261 0d..3 30us : do_softirq (irq_exit)
+ sshd-4261 0d... 30us : __do_softirq (do_softirq)
+ sshd-4261 0d... 31us : __local_bh_disable (__do_softirq)
+ sshd-4261 0d... 31us+: add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s4 34us : add_preempt_count (__local_bh_disable)
+[...]
+ sshd-4261 0d.s3 43us : sub_preempt_count (local_bh_enable_ip)
+ sshd-4261 0d.s4 44us : sub_preempt_count (local_bh_enable_ip)
+ sshd-4261 0d.s3 44us : smp_apic_timer_interrupt (apic_timer_interrupt)
+ sshd-4261 0d.s3 45us : irq_enter (smp_apic_timer_interrupt)
+ sshd-4261 0d.s3 45us : idle_cpu (irq_enter)
+ sshd-4261 0d.s3 46us : add_preempt_count (irq_enter)
+ sshd-4261 0d.H3 46us : idle_cpu (irq_enter)
+ sshd-4261 0d.H3 47us : hrtimer_interrupt (smp_apic_timer_interrupt)
+ sshd-4261 0d.H3 47us : ktime_get (hrtimer_interrupt)
+[...]
+ sshd-4261 0d.H3 81us : tick_program_event (hrtimer_interrupt)
+ sshd-4261 0d.H3 82us : ktime_get (tick_program_event)
+ sshd-4261 0d.H3 82us : ktime_get_ts (ktime_get)
+ sshd-4261 0d.H3 83us : getnstimeofday (ktime_get_ts)
+ sshd-4261 0d.H3 83us : set_normalized_timespec (ktime_get_ts)
+ sshd-4261 0d.H3 84us : clockevents_program_event (tick_program_event)
+ sshd-4261 0d.H3 84us : lapic_next_event (clockevents_program_event)
+ sshd-4261 0d.H3 85us : irq_exit (smp_apic_timer_interrupt)
+ sshd-4261 0d.H3 85us : sub_preempt_count (irq_exit)
+ sshd-4261 0d.s4 86us : sub_preempt_count (irq_exit)
+ sshd-4261 0d.s3 86us : add_preempt_count (__local_bh_disable)
+[...]
+ sshd-4261 0d.s1 98us : sub_preempt_count (net_rx_action)
+ sshd-4261 0d.s. 99us : add_preempt_count (_spin_lock_irq)
+ sshd-4261 0d.s1 99us+: _spin_unlock_irq (run_timer_softirq)
+ sshd-4261 0d.s. 104us : _local_bh_enable (__do_softirq)
+ sshd-4261 0d.s. 104us : sub_preempt_count (_local_bh_enable)
+ sshd-4261 0d.s. 105us : _local_bh_enable (__do_softirq)
+ sshd-4261 0d.s1 105us : trace_preempt_on (__do_softirq)
+
+
+This is a very interesting trace. It started with the preemption of
+the ls task. We see that the task had the "need_resched" bit set
+with the 'N' in the trace. Interrupts are disabled in the spin_lock
+and the trace started. We see that a schedule took place to run
+sshd. When the interrupts were enabled we took an interrupt.
+On return of the interrupt the softirq ran. We took another interrupt
+while running the softirq as we see with the capital 'H'.
+
+
+wakeup
+------
+
+In Real-Time environment it is very important to know the wakeup
+time it takes for the highest priority task that wakes up to the
+time it executes. This is also known as "schedule latency".
+I stress the point that this is about RT tasks. It is also important
+to know the scheduling latency of non-RT tasks, but the average
+schedule latency is better for non-RT tasks. Tools like
+LatencyTop is more appropriate for such measurements.
+
+Real-Time environments is interested in the worst case latency.
+That is the longest latency it takes for something to happen, and
+not the average. We can have a very fast scheduler that may only
+have a large latency once in a while, but that would not work well
+with Real-Time tasks. The wakeup tracer was designed to record
+the worst case wakeups of RT tasks. Non-RT tasks are not recorded
+because the tracer only records one worst case and tracing non-RT
+tasks that are unpredictable will overwrite the worst case latency
+of RT tasks.
+
+Since this tracer only deals with RT tasks, we will run this slightly
+different than we did with the previous tracers. Instead of performing
+an 'ls' we will run 'sleep 1' under 'chrt' which changes the
+priority of the task.
+
+ # echo wakeup > /debug/tracing/current_tracer
+ # echo 0 > /debug/tracing/tracing_max_latency
+ # echo 1 > /debug/tracing/tracing_enabled
+ # chrt -f 5 sleep 1
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/latency_trace
+# tracer: wakeup
+#
+wakeup latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 4 us, #2/2, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: sleep-4901 (uid:0 nice:0 policy:1 rt_prio:5)
+ -----------------
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ <idle>-0 1d.h4 0us+: try_to_wake_up (wake_up_process)
+ <idle>-0 1d..4 4us : schedule (cpu_idle)
+
+
+vim:ft=help
+
+
+Running this on an idle system we see that it only took 4 microseconds
+to perform the task switch. Note, since the trace marker in the
+schedule is before the actual "switch" we stop the tracing when
+the recorded task is about to schedule in. This may change if
+we add a new marker at the end of the scheduler.
+
+Notice that the recorded task is 'sleep' with the PID of 4901 and it
+has an rt_prio of 5. This priority is user-space priority and not
+the internal kernel priority. The policy is 1 for SCHED_FIFO and 2
+for SCHED_RR.
+
+Doing the same with chrt -r 5 and ftrace_enabled set.
+
+# tracer: wakeup
+#
+wakeup latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 50 us, #60/60, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: sleep-4068 (uid:0 nice:0 policy:2 rt_prio:5)
+ -----------------
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ksoftirq-7 1d.H3 0us : try_to_wake_up (wake_up_process)
+ksoftirq-7 1d.H4 1us : sub_preempt_count (marker_probe_cb)
+ksoftirq-7 1d.H3 2us : check_preempt_wakeup (try_to_wake_up)
+ksoftirq-7 1d.H3 3us : update_curr (check_preempt_wakeup)
+ksoftirq-7 1d.H3 4us : calc_delta_mine (update_curr)
+ksoftirq-7 1d.H3 5us : __resched_task (check_preempt_wakeup)
+ksoftirq-7 1d.H3 6us : task_wake_up_rt (try_to_wake_up)
+ksoftirq-7 1d.H3 7us : _spin_unlock_irqrestore (try_to_wake_up)
+[...]
+ksoftirq-7 1d.H2 17us : irq_exit (smp_apic_timer_interrupt)
+ksoftirq-7 1d.H2 18us : sub_preempt_count (irq_exit)
+ksoftirq-7 1d.s3 19us : sub_preempt_count (irq_exit)
+ksoftirq-7 1..s2 20us : rcu_process_callbacks (__do_softirq)
+[...]
+ksoftirq-7 1..s2 26us : __rcu_process_callbacks (rcu_process_callbacks)
+ksoftirq-7 1d.s2 27us : _local_bh_enable (__do_softirq)
+ksoftirq-7 1d.s2 28us : sub_preempt_count (_local_bh_enable)
+ksoftirq-7 1.N.3 29us : sub_preempt_count (ksoftirqd)
+ksoftirq-7 1.N.2 30us : _cond_resched (ksoftirqd)
+ksoftirq-7 1.N.2 31us : __cond_resched (_cond_resched)
+ksoftirq-7 1.N.2 32us : add_preempt_count (__cond_resched)
+ksoftirq-7 1.N.2 33us : schedule (__cond_resched)
+ksoftirq-7 1.N.2 33us : add_preempt_count (schedule)
+ksoftirq-7 1.N.3 34us : hrtick_clear (schedule)
+ksoftirq-7 1dN.3 35us : _spin_lock (schedule)
+ksoftirq-7 1dN.3 36us : add_preempt_count (_spin_lock)
+ksoftirq-7 1d..4 37us : put_prev_task_fair (schedule)
+ksoftirq-7 1d..4 38us : update_curr (put_prev_task_fair)
+[...]
+ksoftirq-7 1d..5 47us : _spin_trylock (tracing_record_cmdline)
+ksoftirq-7 1d..5 48us : add_preempt_count (_spin_trylock)
+ksoftirq-7 1d..6 49us : _spin_unlock (tracing_record_cmdline)
+ksoftirq-7 1d..6 49us : sub_preempt_count (_spin_unlock)
+ksoftirq-7 1d..4 50us : schedule (__cond_resched)
+
+The interrupt went off while running ksoftirqd. This task runs at
+SCHED_OTHER. Why didn't we see the 'N' set early? This may be
+a harmless bug with x86_32 and 4K stacks. The need_reched() function
+that tests if we need to reschedule looks on the actual stack.
+Where as the setting of the NEED_RESCHED bit happens on the
+task's stack. But because we are in a hard interrupt, the test
+is with the interrupts stack which has that to be false. We don't
+see the 'N' until we switch back to the task's stack.
+
+ftrace
+------
+
+ftrace is not only the name of the tracing infrastructure, but it
+is also a name of one of the tracers. The tracer is the function
+tracer. Enabling the function tracer can be done from the
+debug file system. Make sure the ftrace_enabled is set otherwise
+this tracer is a nop.
+
+ # sysctl kernel.ftrace_enabled=1
+ # echo ftrace > /debug/tracing/current_tracer
+ # echo 1 > /debug/tracing/tracing_enabled
+ # usleep 1
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/trace
+# tracer: ftrace
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ bash-4003 [00] 123.638713: finish_task_switch <-schedule
+ bash-4003 [00] 123.638714: _spin_unlock_irq <-finish_task_switch
+ bash-4003 [00] 123.638714: sub_preempt_count <-_spin_unlock_irq
+ bash-4003 [00] 123.638715: hrtick_set <-schedule
+ bash-4003 [00] 123.638715: _spin_lock_irqsave <-hrtick_set
+ bash-4003 [00] 123.638716: add_preempt_count <-_spin_lock_irqsave
+ bash-4003 [00] 123.638716: _spin_unlock_irqrestore <-hrtick_set
+ bash-4003 [00] 123.638717: sub_preempt_count <-_spin_unlock_irqrestore
+ bash-4003 [00] 123.638717: hrtick_clear <-hrtick_set
+ bash-4003 [00] 123.638718: sub_preempt_count <-schedule
+ bash-4003 [00] 123.638718: sub_preempt_count <-preempt_schedule
+ bash-4003 [00] 123.638719: wait_for_completion <-__stop_machine_run
+ bash-4003 [00] 123.638719: wait_for_common <-wait_for_completion
+ bash-4003 [00] 123.638720: _spin_lock_irq <-wait_for_common
+ bash-4003 [00] 123.638720: add_preempt_count <-_spin_lock_irq
+[...]
+
+
+Note: It is sometimes better to enable or disable tracing directly from
+a program, because the buffer may be overflowed by the echo commands
+before you get to the point you want to trace. It is also easier to
+stop the tracing at the point that you hit the part that you are
+interested in. Since the ftrace buffer is a ring buffer with the
+oldest data being overwritten, usually it is sufficient to start the
+tracer with an echo command but have you code stop it. Something
+like the following is usually appropriate for this.
+
+int trace_fd;
+[...]
+int main(int argc, char *argv[]) {
+ [...]
+ trace_fd = open("/debug/tracing/tracing_enabled", O_WRONLY);
+ [...]
+ if (condition_hit()) {
+ write(trace_fd, "0", 1);
+ }
+ [...]
+}
+
+
+dynamic ftrace
+--------------
+
+If CONFIG_DYNAMIC_FTRACE is set, then the system will run with
+virtually no overhead when function tracing is disabled. The way
+this works is the mcount function call (placed at the start of
+every kernel function, produced by the -pg switch in gcc), starts
+of pointing to a simple return.
+
+When dynamic ftrace is initialized, it calls kstop_machine to make it
+act like a uniprocessor so that it can freely modify code without
+worrying about other processors executing that same code. At
+initialization, the mcount calls are change to call a "record_ip"
+function. After this, the first time a kernel function is called,
+it has the calling address saved in a hash table.
+
+Later on the ftraced kernel thread is awoken and will again call
+kstop_machine if new functions have been recorded. The ftraced thread
+will change all calls to mcount to "nop". Just calling mcount
+and having mcount return has shown a 10% overhead. By converting
+it to a nop, there is no recordable overhead to the system.
+
+One special side-effect to the recording of the functions being
+traced, is that we can now selectively choose which functions we
+want to trace and which ones we want the mcount calls to remain as
+nops.
+
+Two files that contain to the enabling and disabling of recorded
+functions are:
+
+ set_ftrace_filter
+
+and
+
+ set_ftrace_notrace
+
+A list of available functions that you can add to this files is listed
+in:
+
+ available_filter_functions
+
+ # cat /debug/tracing/available_filter_functions
+put_prev_task_idle
+kmem_cache_create
+pick_next_task_rt
+get_online_cpus
+pick_next_task_fair
+mutex_lock
+[...]
+
+If I'm only interested in sys_nanosleep and hrtimer_interrupt:
+
+ # echo sys_nanosleep hrtimer_interrupt \
+ > /debug/tracing/set_ftrace_filter
+ # echo ftrace > /debug/tracing/current_tracer
+ # echo 1 > /debug/tracing/tracing_enabled
+ # usleep 1
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/trace
+# tracer: ftrace
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ usleep-4134 [00] 1317.070017: hrtimer_interrupt <-smp_apic_timer_interrupt
+ usleep-4134 [00] 1317.070111: sys_nanosleep <-syscall_call
+ <idle>-0 [00] 1317.070115: hrtimer_interrupt <-smp_apic_timer_interrupt
+
+To see what functions are being traced, you can cat the file:
+
+ # cat /debug/tracing/set_ftrace_filter
+hrtimer_interrupt
+sys_nanosleep
+
+
+Perhaps this isn't enough. The filters also allow simple wild cards.
+Only the following is currently available
+
+ <match>* - will match functions that begins with <match>
+ *<match> - will match functions that end with <match>
+ *<match>* - will match functions that have <match> in it
+
+Thats all the wild cards that are allowed.
+
+ <match>*<match> will not work.
+
+ # echo hrtimer_* > /debug/tracing/set_ftrace_filter
+
+Produces:
+
+# tracer: ftrace
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ bash-4003 [00] 1480.611794: hrtimer_init <-copy_process
+ bash-4003 [00] 1480.611941: hrtimer_start <-hrtick_set
+ bash-4003 [00] 1480.611956: hrtimer_cancel <-hrtick_clear
+ bash-4003 [00] 1480.611956: hrtimer_try_to_cancel <-hrtimer_cancel
+ <idle>-0 [00] 1480.612019: hrtimer_get_next_event <-get_next_timer_interrupt
+ <idle>-0 [00] 1480.612025: hrtimer_get_next_event <-get_next_timer_interrupt
+ <idle>-0 [00] 1480.612032: hrtimer_get_next_event <-get_next_timer_interrupt
+ <idle>-0 [00] 1480.612037: hrtimer_get_next_event <-get_next_timer_interrupt
+ <idle>-0 [00] 1480.612382: hrtimer_get_next_event <-get_next_timer_interrupt
+
+
+Notice that we lost the sys_nanosleep.
+
+ # cat /debug/tracing/set_ftrace_filter
+hrtimer_run_queues
+hrtimer_run_pending
+hrtimer_init
+hrtimer_cancel
+hrtimer_try_to_cancel
+hrtimer_forward
+hrtimer_start
+hrtimer_reprogram
+hrtimer_force_reprogram
+hrtimer_get_next_event
+hrtimer_interrupt
+hrtimer_nanosleep
+hrtimer_wakeup
+hrtimer_get_remaining
+hrtimer_get_res
+hrtimer_init_sleeper
+
+
+This is because the '>' and '>>' act just like they do in bash.
+To rewrite the filters, use '>'
+To append to the filters, use '>>'
+
+To clear out a filter so that all functions will be recorded again.
+
+ # echo > /debug/tracing/set_ftrace_filter
+ # cat /debug/tracing/set_ftrace_filter
+ #
+
+Again, now we want to append.
+
+ # echo sys_nanosleep > /debug/tracing/set_ftrace_filter
+ # cat /debug/tracing/set_ftrace_filter
+sys_nanosleep
+ # echo hrtimer_* >> /debug/tracing/set_ftrace_filter
+ # cat /debug/tracing/set_ftrace_filter
+hrtimer_run_queues
+hrtimer_run_pending
+hrtimer_init
+hrtimer_cancel
+hrtimer_try_to_cancel
+hrtimer_forward
+hrtimer_start
+hrtimer_reprogram
+hrtimer_force_reprogram
+hrtimer_get_next_event
+hrtimer_interrupt
+sys_nanosleep
+hrtimer_nanosleep
+hrtimer_wakeup
+hrtimer_get_remaining
+hrtimer_get_res
+hrtimer_init_sleeper
+
+
+The set_ftrace_notrace prevents those functions from being traced.
+
+ # echo '*preempt*' '*lock*' > /debug/tracing/set_ftrace_notrace
+
+Produces:
+
+# tracer: ftrace
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ bash-4043 [01] 115.281644: finish_task_switch <-schedule
+ bash-4043 [01] 115.281645: hrtick_set <-schedule
+ bash-4043 [01] 115.281645: hrtick_clear <-hrtick_set
+ bash-4043 [01] 115.281646: wait_for_completion <-__stop_machine_run
+ bash-4043 [01] 115.281647: wait_for_common <-wait_for_completion
+ bash-4043 [01] 115.281647: kthread_stop <-stop_machine_run
+ bash-4043 [01] 115.281648: init_waitqueue_head <-kthread_stop
+ bash-4043 [01] 115.281648: wake_up_process <-kthread_stop
+ bash-4043 [01] 115.281649: try_to_wake_up <-wake_up_process
+
+We can see that there's no more lock or preempt tracing.
+
+ftraced
+-------
+
+As mentioned above, when dynamic ftrace is configured in, a kernel
+thread wakes up once a second and checks to see if there are mcount
+calls that need to be converted into nops. If there is not, then
+it simply goes back to sleep. But if there is, it will call
+kstop_machine to convert the calls to nops.
+
+There may be a case that you do not want this added latency.
+Perhaps you are doing some audio recording and this activity might
+cause skips in the playback. There is an interface to disable
+and enable the ftraced kernel thread.
+
+ # echo 0 > /debug/tracing/ftraced_enabled
+
+This will disable the calling of the kstop_machine to update the
+mcount calls to nops. Remember that there's a large overhead
+to calling mcount. Without this kernel thread, that overhead will
+exist.
+
+Any write to the ftraced_enabled file will cause the kstop_machine
+to run if there are recorded calls to mcount. This means that a
+user can manually perform the updates when they want to by simply
+echoing a '0' into the ftraced_enabled file.
+
+The updates are also done at the beginning of enabling a tracer
+that uses ftrace function recording.
+
+
+trace_pipe
+----------
+
+The trace_pipe outputs the same as trace, but the effect on the
+tracing is different. Every read from trace_pipe is consumed.
+This means that subsequent reads will be different. The trace
+is live.
+
+ # echo ftrace > /debug/tracing/current_tracer
+ # cat /debug/tracing/trace_pipe > /tmp/trace.out &
+[1] 4153
+ # echo 1 > /debug/tracing/tracing_enabled
+ # usleep 1
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/trace
+# tracer: ftrace
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+
+ #
+ # cat /tmp/trace.out
+ bash-4043 [00] 41.267106: finish_task_switch <-schedule
+ bash-4043 [00] 41.267106: hrtick_set <-schedule
+ bash-4043 [00] 41.267107: hrtick_clear <-hrtick_set
+ bash-4043 [00] 41.267108: wait_for_completion <-__stop_machine_run
+ bash-4043 [00] 41.267108: wait_for_common <-wait_for_completion
+ bash-4043 [00] 41.267109: kthread_stop <-stop_machine_run
+ bash-4043 [00] 41.267109: init_waitqueue_head <-kthread_stop
+ bash-4043 [00] 41.267110: wake_up_process <-kthread_stop
+ bash-4043 [00] 41.267110: try_to_wake_up <-wake_up_process
+ bash-4043 [00] 41.267111: select_task_rq_rt <-try_to_wake_up
+
+
+Note, reading the trace_pipe will block until more input is added.
+By changing the tracer, trace_pipe will issue an EOF. We needed
+to set the ftrace tracer _before_ cating the trace_pipe file.
+
+
+trace entries
+-------------
+
+Having too much or not enough data can be troublesome in diagnosing
+some issue in the kernel. The file trace_entries is used to modify
+the size of the internal trace buffers. The numbers listed
+is the number of entries that can be recorded per CPU. To know
+the full size, multiply the number of possible CPUS with the
+number of entries.
+
+ # cat /debug/tracing/trace_entries
+65620
+
+Note, to modify this you must have tracing fulling disabled. To do that,
+echo "none" into the current_tracer.
+
+ # echo none > /debug/tracing/current_tracer
+ # echo 100000 > /debug/tracing/trace_entries
+ # cat /debug/tracing/trace_entries
+100045
+
+
+Notice that we echoed in 100,000 but the size is 100,045. The entries
+are held by individual pages. It allocates the number of pages it takes
+to fulfill the request. If more entries may fit on the last page
+it will add them.
+
+ # echo 1 > /debug/tracing/trace_entries
+ # cat /debug/tracing/trace_entries
+85
+
+This shows us that 85 entries can fit on a single page.
+
+The number of pages that will be allocated is a percentage of available
+memory. Allocating too much will produces an error.
+
+ # echo 1000000000000 > /debug/tracing/trace_entries
+-bash: echo: write error: Cannot allocate memory
+ # cat /debug/tracing/trace_entries
+85
+
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index f4a8ebc..2d84573 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -2,17 +2,12 @@
------------------------------------------------
The libsensors library offers an interface to the raw sensors data
-through the sysfs interface. See libsensors documentation and source for
-further information. As of writing this document, libsensors
-(from lm_sensors 2.8.3) is heavily chip-dependent. Adding or updating
-support for any given chip requires modifying the library's code.
-This is because libsensors was written for the procfs interface
-older kernel modules were using, which wasn't standardized enough.
-Recent versions of libsensors (from lm_sensors 2.8.2 and later) have
-support for the sysfs interface, though.
-
-The new sysfs interface was designed to be as chip-independent as
-possible.
+through the sysfs interface. Since lm-sensors 3.0.0, libsensors is
+completely chip-independent. It assumes that all the kernel drivers
+implement the standard sysfs interface described in this document.
+This makes adding or updating support for any given chip very easy, as
+libsensors, and applications using it, do not need to be modified.
+This is a major improvement compared to lm-sensors 2.
Note that motherboards vary widely in the connections to sensor chips.
There is no standard that ensures, for example, that the second
@@ -35,19 +30,17 @@
will have to implement conversion, labeling and hiding of inputs. For
this reason, it is still not recommended to bypass the library.
-If you are developing a userspace application please send us feedback on
-this standard.
-
-Note that this standard isn't completely established yet, so it is subject
-to changes. If you are writing a new hardware monitoring driver those
-features can't seem to fit in this interface, please contact us with your
-extension proposal. Keep in mind that backward compatibility must be
-preserved.
-
Each chip gets its own directory in the sysfs /sys/devices tree. To
find all sensor chips, it is easier to follow the device symlinks from
/sys/class/hwmon/hwmon*.
+Up to lm-sensors 3.0.0, libsensors looks for hardware monitoring attributes
+in the "physical" device directory. Since lm-sensors 3.0.1, attributes found
+in the hwmon "class" device directory are also supported. Complex drivers
+(e.g. drivers for multifunction chips) may want to use this possibility to
+avoid namespace pollution. The only drawback will be that older versions of
+libsensors won't support the driver in question.
+
All sysfs values are fixed point numbers.
There is only one value per file, unlike the older /proc specification.
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index ee75cba..d4cd412 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -25,12 +25,23 @@
provide. A client structure holds device-specific information like the
driver model device node, and its I2C address.
+/* iff driver uses driver model ("new style") binding model: */
+
+static struct i2c_device_id foo_idtable[] = {
+ { "foo", my_id_for_foo },
+ { "bar", my_id_for_bar },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, foo_idtable);
+
static struct i2c_driver foo_driver = {
.driver = {
.name = "foo",
},
/* iff driver uses driver model ("new style") binding model: */
+ .id_table = foo_ids,
.probe = foo_probe,
.remove = foo_remove,
@@ -173,10 +184,9 @@
(zero not a negative status code) it may save the handle and use it until
foo_remove() returns. That binding model is used by most Linux drivers.
-Drivers match devices when i2c_client.driver_name and the driver name are
-the same; this approach is used in several other busses that don't have
-device typing support in the hardware. The driver and module name should
-match, so hotplug/coldplug mechanisms will modprobe the driver.
+The probe function is called when an entry in the id_table name field
+matches the device's name. It is passed the entry that was matched so
+the driver knows which one in the table matched.
Device Creation (Standard driver model)
diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index 2075c06..0bd3274 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -1,6 +1,105 @@
kernel-doc nano-HOWTO
=====================
+How to format kernel-doc comments
+---------------------------------
+
+In order to provide embedded, 'C' friendly, easy to maintain,
+but consistent and extractable documentation of the functions and
+data structures in the Linux kernel, the Linux kernel has adopted
+a consistent style for documenting functions and their parameters,
+and structures and their members.
+
+The format for this documentation is called the kernel-doc format.
+It is documented in this Documentation/kernel-doc-nano-HOWTO.txt file.
+
+This style embeds the documentation within the source files, using
+a few simple conventions. The scripts/kernel-doc perl script, some
+SGML templates in Documentation/DocBook, and other tools understand
+these conventions, and are used to extract this embedded documentation
+into various documents.
+
+In order to provide good documentation of kernel functions and data
+structures, please use the following conventions to format your
+kernel-doc comments in Linux kernel source.
+
+We definitely need kernel-doc formatted documentation for functions
+that are exported to loadable modules using EXPORT_SYMBOL.
+
+We also look to provide kernel-doc formatted documentation for
+functions externally visible to other kernel files (not marked
+"static").
+
+We also recommend providing kernel-doc formatted documentation
+for private (file "static") routines, for consistency of kernel
+source code layout. But this is lower priority and at the
+discretion of the MAINTAINER of that kernel source file.
+
+Data structures visible in kernel include files should also be
+documented using kernel-doc formatted comments.
+
+The opening comment mark "/**" is reserved for kernel-doc comments.
+Only comments so marked will be considered by the kernel-doc scripts,
+and any comment so marked must be in kernel-doc format. Do not use
+"/**" to be begin a comment block unless the comment block contains
+kernel-doc formatted comments. The closing comment marker for
+kernel-doc comments can be either "*/" or "**/".
+
+Kernel-doc comments should be placed just before the function
+or data structure being described.
+
+Example kernel-doc function comment:
+
+/**
+ * foobar() - short function description of foobar
+ * @arg1: Describe the first argument to foobar.
+ * @arg2: Describe the second argument to foobar.
+ * One can provide multiple line descriptions
+ * for arguments.
+ *
+ * A longer description, with more discussion of the function foobar()
+ * that might be useful to those using or modifying it. Begins with
+ * empty comment line, and may include additional embedded empty
+ * comment lines.
+ *
+ * The longer description can have multiple paragraphs.
+ **/
+
+The first line, with the short description, must be on a single line.
+
+The @argument descriptions must begin on the very next line following
+this opening short function description line, with no intervening
+empty comment lines.
+
+Example kernel-doc data structure comment.
+
+/**
+ * struct blah - the basic blah structure
+ * @mem1: describe the first member of struct blah
+ * @mem2: describe the second member of struct blah,
+ * perhaps with more lines and words.
+ *
+ * Longer description of this structure.
+ **/
+
+The kernel-doc function comments describe each parameter to the
+function, in order, with the @name lines.
+
+The kernel-doc data structure comments describe each structure member
+in the data structure, with the @name lines.
+
+The longer description formatting is "reflowed", losing your line
+breaks. So presenting carefully formatted lists within these
+descriptions won't work so well; derived documentation will lose
+the formatting.
+
+See the section below "How to add extractable documentation to your
+source files" for more details and notes on how to format kernel-doc
+comments.
+
+Components of the kernel-doc system
+-----------------------------------
+
Many places in the source tree have extractable documentation in the
form of block comments above functions. The components of this system
are:
diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt
index 5a4ef48..28cdc2a 100644
--- a/Documentation/kernel-docs.txt
+++ b/Documentation/kernel-docs.txt
@@ -715,14 +715,14 @@
* Name: "Gary's Encyclopedia - The Linux Kernel"
Author: Gary (I suppose...).
- URL: http://www.lisoleg.net/cgi-bin/lisoleg.pl?view=kernel.htm
- Keywords: links, not found here?.
+ URL: http://slencyclopedia.berlios.de/index.html
+ Keywords: linux, community, everything!
Description: Gary's Encyclopedia exists to allow the rapid finding
of documentation and other information of interest to GNU/Linux
users. It has about 4000 links to external pages in 150 major
categories. This link is for kernel-specific links, documents,
- sites... Look there if you could not find here what you were
- looking for.
+ sites... This list is now hosted by developer.Berlios.de,
+ but seems not to have been updated since sometime in 1999.
* Name: "The home page of Linux-MM"
Author: The Linux-MM team.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e07c432..b52f47d 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -295,7 +295,7 @@
when initialising the APIC and IO-APIC components.
apm= [APM] Advanced Power Management
- See header of arch/i386/kernel/apm.c.
+ See header of arch/x86/kernel/apm_32.c.
arcrimi= [HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards
Format: <io>,<irq>,<nodeID>
@@ -638,7 +638,7 @@
elanfreq= [X86-32]
See comment before function elanfreq_setup() in
- arch/i386/kernel/cpu/cpufreq/elanfreq.c.
+ arch/x86/kernel/cpu/cpufreq/elanfreq.c.
elevator= [IOSCHED]
Format: {"anticipatory" | "cfq" | "deadline" | "noop"}
@@ -1679,6 +1679,10 @@
Format: <reboot_mode>[,<reboot_mode2>[,...]]
See arch/*/kernel/reboot.c or arch/*/kernel/process.c
+ relax_domain_level=
+ [KNL, SMP] Set scheduler's default relax_domain_level.
+ See Documentation/cpusets.txt.
+
reserve= [KNL,BUGS] Force the kernel to ignore some iomem area
reservetop= [X86-32]
diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt
index bf3256e..51a8021 100644
--- a/Documentation/kobject.txt
+++ b/Documentation/kobject.txt
@@ -305,7 +305,7 @@
A kset keeps its children in a standard kernel linked list. Kobjects point
back to their containing kset via their kset field. In almost all cases,
-the kobjects belonging to a ket have that kset (or, strictly, its embedded
+the kobjects belonging to a kset have that kset (or, strictly, its embedded
kobject) in their parent.
As a kset contains a kobject within it, it should always be dynamically
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 01c6c3d..64b3f14 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -503,7 +503,7 @@
In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW
events for switches:
-SW_RADIO T60 and later hardare rfkill rocker switch
+SW_RFKILL_ALL T60 and later hardare rfkill rocker switch
SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A
Non hot-key ACPI HKEY event map:
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 3be8ab2..82fafe0 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -157,6 +157,9 @@
/* The routine to call when the Guest pings us. */
void (*handle_output)(int fd, struct virtqueue *me);
+
+ /* Outstanding buffers */
+ unsigned int inflight;
};
/* Remember the arguments to the program so we can "reboot" */
@@ -702,6 +705,7 @@
errx(1, "Looped descriptor");
} while ((i = next_desc(vq, i)) != vq->vring.num);
+ vq->inflight++;
return head;
}
@@ -719,6 +723,7 @@
/* Make sure buffer is written before we update index. */
wmb();
vq->vring.used->idx++;
+ vq->inflight--;
}
/* This actually sends the interrupt for this virtqueue */
@@ -726,8 +731,9 @@
{
unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
- /* If they don't want an interrupt, don't send one. */
- if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+ /* If they don't want an interrupt, don't send one, unless empty. */
+ if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+ && vq->inflight)
return;
/* Send the Guest an interrupt tell them we used something up. */
@@ -1107,6 +1113,7 @@
vq->next = NULL;
vq->last_avail_idx = 0;
vq->dev = dev;
+ vq->inflight = 0;
/* Initialize the configuration. */
vq->config.num = num_descs;
@@ -1368,6 +1375,7 @@
/* Tell Guest what MAC address to use. */
add_feature(dev, VIRTIO_NET_F_MAC);
+ add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
set_config(dev, sizeof(conf), &conf);
/* We don't need the socket any more; setup is done. */
diff --git a/Documentation/networking/arcnet.txt b/Documentation/networking/arcnet.txt
index 770fc41..7960125 100644
--- a/Documentation/networking/arcnet.txt
+++ b/Documentation/networking/arcnet.txt
@@ -46,7 +46,7 @@
This new release (2.91) has been put together by David Woodhouse
-<dwmw2@cam.ac.uk>, in an attempt to tidy up the driver after adding support
+<dwmw2@infradead.org>, in an attempt to tidy up the driver after adding support
for yet another chipset. Now the generic support has been separated from the
individual chipset drivers, and the source files aren't quite so packed with
#ifdefs! I've changed this file a bit, but kept it in the first person from
diff --git a/Documentation/networking/bridge.txt b/Documentation/networking/bridge.txt
index bdae2db..bec69a8 100644
--- a/Documentation/networking/bridge.txt
+++ b/Documentation/networking/bridge.txt
@@ -1,6 +1,6 @@
In order to use the Ethernet bridging functionality, you'll need the
userspace tools. These programs and documentation are available
-at http://bridge.sourceforge.net. The download page is
+at http://www.linux-foundation.org/en/Net:Bridge. The download page is
http://prdownloads.sourceforge.net/bridge.
If you still have questions, don't hesitate to post to the mailing list
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 17a6e46..946b66e 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -81,23 +81,23 @@
Minimum time-to-live of entries. Should be enough to cover fragment
time-to-live on the reassembling side. This minimum time-to-live is
guaranteed if the pool size is less than inet_peer_threshold.
- Measured in jiffies(1).
+ Measured in seconds.
inet_peer_maxttl - INTEGER
Maximum time-to-live of entries. Unused entries will expire after
this period of time if there is no memory pressure on the pool (i.e.
when the number of entries in the pool is very small).
- Measured in jiffies(1).
+ Measured in seconds.
inet_peer_gc_mintime - INTEGER
Minimum interval between garbage collection passes. This interval is
in effect under high memory pressure on the pool.
- Measured in jiffies(1).
+ Measured in seconds.
inet_peer_gc_maxtime - INTEGER
Minimum interval between garbage collection passes. This interval is
in effect under low (or absent) memory pressure on the pool.
- Measured in jiffies(1).
+ Measured in seconds.
TCP variables:
@@ -148,9 +148,9 @@
but not loaded.
tcp_base_mss - INTEGER
- The initial value of search_low to be used by Packetization Layer
- Path MTU Discovery (MTU probing). If MTU probing is enabled,
- this is the inital MSS used by the connection.
+ The initial value of search_low to be used by the packetization layer
+ Path MTU discovery (MTU probing). If MTU probing is enabled,
+ this is the initial MSS used by the connection.
tcp_congestion_control - STRING
Set the congestion control algorithm to be used for new
@@ -185,10 +185,9 @@
timeouts. It is particularly beneficial in wireless environments
where packet loss is typically due to random radio interference
rather than intermediate router congestion. F-RTO is sender-side
- only modification. Therefore it does not require any support from
- the peer, but in a typical case, however, where wireless link is
- the local access link and most of the data flows downlink, the
- faraway servers should have F-RTO enabled to take advantage of it.
+ only modification. Therefore it does not require any support from
+ the peer.
+
If set to 1, basic version is enabled. 2 enables SACK enhanced
F-RTO if flow uses SACK. The basic version can be used also when
SACK is in use though scenario(s) with it exists where F-RTO
@@ -276,7 +275,7 @@
memory.
tcp_moderate_rcvbuf - BOOLEAN
- If set, TCP performs receive buffer autotuning, attempting to
+ If set, TCP performs receive buffer auto-tuning, attempting to
automatically size the buffer (no greater than tcp_rmem[2]) to
match the size required by the path for full throughput. Enabled by
default.
@@ -336,7 +335,7 @@
pressure.
Default: 8K
- default: default size of receive buffer used by TCP sockets.
+ default: initial size of receive buffer used by TCP sockets.
This value overrides net.core.rmem_default used by other protocols.
Default: 87380 bytes. This value results in window of 65535 with
default setting of tcp_adv_win_scale and tcp_app_win:0 and a bit
@@ -344,8 +343,10 @@
max: maximal size of receive buffer allowed for automatically
selected receiver buffers for TCP socket. This value does not override
- net.core.rmem_max, "static" selection via SO_RCVBUF does not use this.
- Default: 87380*2 bytes.
+ net.core.rmem_max. Calling setsockopt() with SO_RCVBUF disables
+ automatic tuning of that socket's receive buffer size, in which
+ case this value is ignored.
+ Default: between 87380B and 4MB, depending on RAM size.
tcp_sack - BOOLEAN
Enable select acknowledgments (SACKS).
@@ -358,7 +359,7 @@
Default: 1
tcp_stdurg - BOOLEAN
- Use the Host requirements interpretation of the TCP urg pointer field.
+ Use the Host requirements interpretation of the TCP urgent pointer field.
Most hosts use the older BSD interpretation, so if you turn this on
Linux might not communicate correctly with them.
Default: FALSE
@@ -371,12 +372,12 @@
tcp_syncookies - BOOLEAN
Only valid when the kernel was compiled with CONFIG_SYNCOOKIES
Send out syncookies when the syn backlog queue of a socket
- overflows. This is to prevent against the common 'syn flood attack'
+ overflows. This is to prevent against the common 'SYN flood attack'
Default: FALSE
Note, that syncookies is fallback facility.
It MUST NOT be used to help highly loaded servers to stand
- against legal connection rate. If you see synflood warnings
+ against legal connection rate. If you see SYN flood warnings
in your logs, but investigation shows that they occur
because of overload with legal connections, you should tune
another parameters until this warning disappear.
@@ -386,7 +387,7 @@
to use TCP extensions, can result in serious degradation
of some services (f.e. SMTP relaying), visible not by you,
but your clients and relays, contacting you. While you see
- synflood warnings in logs not being really flooded, your server
+ SYN flood warnings in logs not being really flooded, your server
is seriously misconfigured.
tcp_syn_retries - INTEGER
@@ -419,19 +420,21 @@
Enable window scaling as defined in RFC1323.
tcp_wmem - vector of 3 INTEGERs: min, default, max
- min: Amount of memory reserved for send buffers for TCP socket.
+ min: Amount of memory reserved for send buffers for TCP sockets.
Each TCP socket has rights to use it due to fact of its birth.
Default: 4K
- default: Amount of memory allowed for send buffers for TCP socket
- by default. This value overrides net.core.wmem_default used
- by other protocols, it is usually lower than net.core.wmem_default.
+ default: initial size of send buffer used by TCP sockets. This
+ value overrides net.core.wmem_default used by other protocols.
+ It is usually lower than net.core.wmem_default.
Default: 16K
- max: Maximal amount of memory allowed for automatically selected
- send buffers for TCP socket. This value does not override
- net.core.wmem_max, "static" selection via SO_SNDBUF does not use this.
- Default: 128K
+ max: Maximal amount of memory allowed for automatically tuned
+ send buffers for TCP sockets. This value does not override
+ net.core.wmem_max. Calling setsockopt() with SO_SNDBUF disables
+ automatic tuning of that socket's send buffer size, in which case
+ this value is ignored.
+ Default: between 64K and 4MB, depending on RAM size.
tcp_workaround_signed_windows - BOOLEAN
If set, assume no receipt of a window scaling option means the
@@ -794,10 +797,6 @@
Allows you to write a number, which can be used as required.
Default value is 0.
-(1) Jiffie: internal timeunit for the kernel. On the i386 1/100s, on the
-Alpha 1/1024s. See the HZ define in /usr/include/asm/param.h for the exact
-value on your system.
-
Alexey Kuznetsov.
kuznet@ms2.inr.ac.ru
@@ -1064,24 +1063,193 @@
Default: 1
+proc/sys/net/sctp/* Variables:
+
+addip_enable - BOOLEAN
+ Enable or disable extension of Dynamic Address Reconfiguration
+ (ADD-IP) functionality specified in RFC5061. This extension provides
+ the ability to dynamically add and remove new addresses for the SCTP
+ associations.
+
+ 1: Enable extension.
+
+ 0: Disable extension.
+
+ Default: 0
+
+addip_noauth_enable - BOOLEAN
+ Dynamic Address Reconfiguration (ADD-IP) requires the use of
+ authentication to protect the operations of adding or removing new
+ addresses. This requirement is mandated so that unauthorized hosts
+ would not be able to hijack associations. However, older
+ implementations may not have implemented this requirement while
+ allowing the ADD-IP extension. For reasons of interoperability,
+ we provide this variable to control the enforcement of the
+ authentication requirement.
+
+ 1: Allow ADD-IP extension to be used without authentication. This
+ should only be set in a closed environment for interoperability
+ with older implementations.
+
+ 0: Enforce the authentication requirement
+
+ Default: 0
+
+auth_enable - BOOLEAN
+ Enable or disable Authenticated Chunks extension. This extension
+ provides the ability to send and receive authenticated chunks and is
+ required for secure operation of Dynamic Address Reconfiguration
+ (ADD-IP) extension.
+
+ 1: Enable this extension.
+ 0: Disable this extension.
+
+ Default: 0
+
+prsctp_enable - BOOLEAN
+ Enable or disable the Partial Reliability extension (RFC3758) which
+ is used to notify peers that a given DATA should no longer be expected.
+
+ 1: Enable extension
+ 0: Disable
+
+ Default: 1
+
+max_burst - INTEGER
+ The limit of the number of new packets that can be initially sent. It
+ controls how bursty the generated traffic can be.
+
+ Default: 4
+
+association_max_retrans - INTEGER
+ Set the maximum number for retransmissions that an association can
+ attempt deciding that the remote end is unreachable. If this value
+ is exceeded, the association is terminated.
+
+ Default: 10
+
+max_init_retransmits - INTEGER
+ The maximum number of retransmissions of INIT and COOKIE-ECHO chunks
+ that an association will attempt before declaring the destination
+ unreachable and terminating.
+
+ Default: 8
+
+path_max_retrans - INTEGER
+ The maximum number of retransmissions that will be attempted on a given
+ path. Once this threshold is exceeded, the path is considered
+ unreachable, and new traffic will use a different path when the
+ association is multihomed.
+
+ Default: 5
+
+rto_initial - INTEGER
+ The initial round trip timeout value in milliseconds that will be used
+ in calculating round trip times. This is the initial time interval
+ for retransmissions.
+
+ Default: 3000
+
+rto_max - INTEGER
+ The maximum value (in milliseconds) of the round trip timeout. This
+ is the largest time interval that can elapse between retransmissions.
+
+ Default: 60000
+
+rto_min - INTEGER
+ The minimum value (in milliseconds) of the round trip timeout. This
+ is the smallest time interval the can elapse between retransmissions.
+
+ Default: 1000
+
+hb_interval - INTEGER
+ The interval (in milliseconds) between HEARTBEAT chunks. These chunks
+ are sent at the specified interval on idle paths to probe the state of
+ a given path between 2 associations.
+
+ Default: 30000
+
+sack_timeout - INTEGER
+ The amount of time (in milliseconds) that the implementation will wait
+ to send a SACK.
+
+ Default: 200
+
+valid_cookie_life - INTEGER
+ The default lifetime of the SCTP cookie (in milliseconds). The cookie
+ is used during association establishment.
+
+ Default: 60000
+
+cookie_preserve_enable - BOOLEAN
+ Enable or disable the ability to extend the lifetime of the SCTP cookie
+ that is used during the establishment phase of SCTP association
+
+ 1: Enable cookie lifetime extension.
+ 0: Disable
+
+ Default: 1
+
+rcvbuf_policy - INTEGER
+ Determines if the receive buffer is attributed to the socket or to
+ association. SCTP supports the capability to create multiple
+ associations on a single socket. When using this capability, it is
+ possible that a single stalled association that's buffering a lot
+ of data may block other associations from delivering their data by
+ consuming all of the receive buffer space. To work around this,
+ the rcvbuf_policy could be set to attribute the receiver buffer space
+ to each association instead of the socket. This prevents the described
+ blocking.
+
+ 1: rcvbuf space is per association
+ 0: recbuf space is per socket
+
+ Default: 0
+
+sndbuf_policy - INTEGER
+ Similar to rcvbuf_policy above, this applies to send buffer space.
+
+ 1: Send buffer is tracked per association
+ 0: Send buffer is tracked per socket.
+
+ Default: 0
+
+sctp_mem - vector of 3 INTEGERs: min, pressure, max
+ Number of pages allowed for queueing by all SCTP sockets.
+
+ min: Below this number of pages SCTP is not bothered about its
+ memory appetite. When amount of memory allocated by SCTP exceeds
+ this number, SCTP starts to moderate memory usage.
+
+ pressure: This value was introduced to follow format of tcp_mem.
+
+ max: Number of pages allowed for queueing by all SCTP sockets.
+
+ Default is calculated at boot time from amount of available memory.
+
+sctp_rmem - vector of 3 INTEGERs: min, default, max
+ See tcp_rmem for a description.
+
+sctp_wmem - vector of 3 INTEGERs: min, default, max
+ See tcp_wmem for a description.
+
UNDOCUMENTED:
-dev_weight FIXME
-discovery_slots FIXME
-discovery_timeout FIXME
-fast_poll_increase FIXME
-ip6_queue_maxlen FIXME
-lap_keepalive_time FIXME
-lo_cong FIXME
-max_baud_rate FIXME
-max_dgram_qlen FIXME
-max_noreply_time FIXME
-max_tx_data_size FIXME
-max_tx_window FIXME
-min_tx_turn_time FIXME
-mod_cong FIXME
-no_cong FIXME
-no_cong_thresh FIXME
-slot_timeout FIXME
-warn_noreply_time FIXME
+/proc/sys/net/core/*
+ dev_weight FIXME
+/proc/sys/net/unix/*
+ max_dgram_qlen FIXME
+
+/proc/sys/net/irda/*
+ fast_poll_increase FIXME
+ warn_noreply_time FIXME
+ discovery_slots FIXME
+ slot_timeout FIXME
+ max_baud_rate FIXME
+ discovery_timeout FIXME
+ lap_keepalive_time FIXME
+ max_noreply_time FIXME
+ max_tx_data_size FIXME
+ max_tx_window FIXME
+ min_tx_turn_time FIXME
diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/s2io.txt
index 4bde53e..1e28e2d 100644
--- a/Documentation/networking/s2io.txt
+++ b/Documentation/networking/s2io.txt
@@ -83,9 +83,9 @@
Default: 30
e. intr_type
-Specifies interrupt type. Possible values 1(INTA), 2(MSI), 3(MSI-X)
-Valid range: 1-3
-Default: 1
+Specifies interrupt type. Possible values 0(INTA), 2(MSI-X)
+Valid values: 0, 2
+Default: 2
5. Performance suggestions
General:
diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828
index aaae360..86d1c8e 100644
--- a/Documentation/video4linux/CARDLIST.au0828
+++ b/Documentation/video4linux/CARDLIST.au0828
@@ -1,4 +1,4 @@
0 -> Unknown board (au0828)
- 1 -> Hauppauge HVR950Q (au0828) [2040:7200]
+ 1 -> Hauppauge HVR950Q (au0828) [2040:7200,2040:7210,2040:7217,2040:721b,2040:721f,2040:7280,0fd9:0008]
2 -> Hauppauge HVR850 (au0828) [2040:7240]
3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 5439573..7cf5685 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -60,7 +60,7 @@
59 -> DViCO FusionHDTV 5 PCI nano [18ac:d530]
60 -> Pinnacle Hybrid PCTV [12ab:1788]
61 -> Winfast TV2000 XP Global [107d:6f18]
- 62 -> PowerColor Real Angel 330 [14f1:ea3d]
+ 62 -> PowerColor RA330 [14f1:ea3d]
63 -> Geniatech X8000-MT DVBT [14f1:8852]
64 -> DViCO FusionHDTV DVB-T PRO [18ac:db30]
65 -> DViCO FusionHDTV 7 Gold [18ac:d610]
diff --git a/Documentation/video4linux/cx18.txt b/Documentation/video4linux/cx18.txt
index 077d56e..6842c26 100644
--- a/Documentation/video4linux/cx18.txt
+++ b/Documentation/video4linux/cx18.txt
@@ -1,7 +1,9 @@
Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
encoder chip:
-1) The only hardware currently supported is the Hauppauge HVR-1600.
+1) The only hardware currently supported is the Hauppauge HVR-1600
+ card and the Compro VideoMate H900 (note that this card only
+ supports analog input, it has no digital tuner!).
2) Some people have problems getting the i2c bus to work. Cause unknown.
The symptom is that the eeprom cannot be read and the card is
diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt
new file mode 100644
index 0000000..ce72c0f
--- /dev/null
+++ b/Documentation/vm/pagemap.txt
@@ -0,0 +1,77 @@
+pagemap, from the userspace perspective
+---------------------------------------
+
+pagemap is a new (as of 2.6.25) set of interfaces in the kernel that allow
+userspace programs to examine the page tables and related information by
+reading files in /proc.
+
+There are three components to pagemap:
+
+ * /proc/pid/pagemap. This file lets a userspace process find out which
+ physical frame each virtual page is mapped to. It contains one 64-bit
+ value for each virtual page, containing the following data (from
+ fs/proc/task_mmu.c, above pagemap_read):
+
+ * Bits 0-55 page frame number (PFN) if present
+ * Bits 0-4 swap type if swapped
+ * Bits 5-55 swap offset if swapped
+ * Bits 55-60 page shift (page size = 1<<page shift)
+ * Bit 61 reserved for future use
+ * Bit 62 page swapped
+ * Bit 63 page present
+
+ If the page is not present but in swap, then the PFN contains an
+ encoding of the swap file number and the page's offset into the
+ swap. Unmapped pages return a null PFN. This allows determining
+ precisely which pages are mapped (or in swap) and comparing mapped
+ pages between processes.
+
+ Efficient users of this interface will use /proc/pid/maps to
+ determine which areas of memory are actually mapped and llseek to
+ skip over unmapped regions.
+
+ * /proc/kpagecount. This file contains a 64-bit count of the number of
+ times each page is mapped, indexed by PFN.
+
+ * /proc/kpageflags. This file contains a 64-bit set of flags for each
+ page, indexed by PFN.
+
+ The flags are (from fs/proc/proc_misc, above kpageflags_read):
+
+ 0. LOCKED
+ 1. ERROR
+ 2. REFERENCED
+ 3. UPTODATE
+ 4. DIRTY
+ 5. LRU
+ 6. ACTIVE
+ 7. SLAB
+ 8. WRITEBACK
+ 9. RECLAIM
+ 10. BUDDY
+
+Using pagemap to do something useful:
+
+The general procedure for using pagemap to find out about a process' memory
+usage goes like this:
+
+ 1. Read /proc/pid/maps to determine which parts of the memory space are
+ mapped to what.
+ 2. Select the maps you are interested in -- all of them, or a particular
+ library, or the stack or the heap, etc.
+ 3. Open /proc/pid/pagemap and seek to the pages you would like to examine.
+ 4. Read a u64 for each page from pagemap.
+ 5. Open /proc/kpagecount and/or /proc/kpageflags. For each PFN you just
+ read, seek to that entry in the file, and read the data you want.
+
+For example, to find the "unique set size" (USS), which is the amount of
+memory that a process is using that is not shared with any other process,
+you can go through every map in the process, find the PFNs, look those up
+in kpagecount, and tally up the number of pages that are only referenced
+once.
+
+Other notes:
+
+Reading from any of the files will return -EINVAL if you are not starting
+the read on an 8-byte boundary (e.g., if you seeked an odd number of bytes
+into the file), or if the size of the read is not a multiple of 8 bytes.
diff --git a/Documentation/vm/slabinfo.c b/Documentation/vm/slabinfo.c
index e4230ed..df32276 100644
--- a/Documentation/vm/slabinfo.c
+++ b/Documentation/vm/slabinfo.c
@@ -1,7 +1,7 @@
/*
* Slabinfo: Tool to get reports about slabs
*
- * (C) 2007 sgi, Christoph Lameter <clameter@sgi.com>
+ * (C) 2007 sgi, Christoph Lameter
*
* Compile by:
*
@@ -99,7 +99,7 @@
void usage(void)
{
- printf("slabinfo 5/7/2007. (c) 2007 sgi. clameter@sgi.com\n\n"
+ printf("slabinfo 5/7/2007. (c) 2007 sgi.\n\n"
"slabinfo [-ahnpvtsz] [-d debugopts] [slab-regexp]\n"
"-a|--aliases Show aliases\n"
"-A|--activity Most active slabs first\n"
diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt
index 7c13f22..bb1f5c6 100644
--- a/Documentation/vm/slub.txt
+++ b/Documentation/vm/slub.txt
@@ -266,4 +266,4 @@
slub_debug=FZ,dentry
-Christoph Lameter, <clameter@sgi.com>, May 30, 2007
+Christoph Lameter, May 30, 2007
diff --git a/MAINTAINERS b/MAINTAINERS
index 0a6d2ca..56a2f67 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -228,21 +228,21 @@
P: Alexey Starikovskiy
M: astarikovskiy@suse.de
L: linux-acpi@vger.kernel.org
-W: http://acpi.sourceforge.net/
+W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI EC DRIVER
P: Alexey Starikovskiy
M: astarikovskiy@suse.de
L: linux-acpi@vger.kernel.org
-W: http://acpi.sourceforge.net/
+W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI FAN DRIVER
P: Len Brown
M: len.brown@intel.com
L: linux-acpi@vger.kernel.org
-W: http://acpi.sourceforge.net/
+W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI PCI HOTPLUG DRIVER
@@ -255,14 +255,14 @@
P: Len Brown
M: len.brown@intel.com
L: linux-acpi@vger.kernel.org
-W: http://acpi.sourceforge.net/
+W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI VIDEO DRIVER
P: Rui Zhang
M: rui.zhang@intel.com
L: linux-acpi@vger.kernel.org
-W: http://acpi.sourceforge.net/
+W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI WMI DRIVER
@@ -274,7 +274,7 @@
AD1889 ALSA SOUND DRIVER
P: Kyle McMartin
-M: kyle@parisc-linux.org
+M: kyle@mcmartin.ca
P: Thibaut Varene
M: T-Bone@parisc-linux.org
W: http://wiki.parisc-linux.org/AD1889
@@ -763,9 +763,10 @@
AUXILIARY DISPLAY DRIVERS
P: Miguel Ojeda Sandonis
-M: maxextreme@gmail.com
+M: miguel.ojeda.sandonis@gmail.com
L: linux-kernel@vger.kernel.org
-W: http://auxdisplay.googlepages.com/
+W: http://miguelojeda.es/auxdisplay.htm
+W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
AVR32 ARCHITECTURE
@@ -995,8 +996,8 @@
S: Supported
BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-P: Eliezer Tamir
-M: eliezert@broadcom.com
+P: Eilon Greenstein
+M: eilong@broadcom.com
L: netdev@vger.kernel.org
S: Supported
@@ -1055,16 +1056,18 @@
CFAG12864B LCD DRIVER
P: Miguel Ojeda Sandonis
-M: maxextreme@gmail.com
+M: miguel.ojeda.sandonis@gmail.com
L: linux-kernel@vger.kernel.org
-W: http://auxdisplay.googlepages.com/
+W: http://miguelojeda.es/auxdisplay.htm
+W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
CFAG12864BFB LCD FRAMEBUFFER DRIVER
P: Miguel Ojeda Sandonis
-M: maxextreme@gmail.com
+M: miguel.ojeda.sandonis@gmail.com
L: linux-kernel@vger.kernel.org
-W: http://auxdisplay.googlepages.com/
+W: http://miguelojeda.es/auxdisplay.htm
+W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
CFG80211 and NL80211
@@ -1202,6 +1205,7 @@
M: menage@google.com
L: linux-kernel@vger.kernel.org
W: http://www.bullopensource.org/cpuset/
+W: http://oss.sgi.com/projects/cpusets/
S: Supported
CRAMFS FILESYSTEM
@@ -1419,6 +1423,14 @@
L: linux-acpi@vger.kernel.org
S: Supported
+DOCUMENTATION (/Documentation directory)
+P: Michael Kerrisk
+M: mtk.manpages@gmail.com
+P: Randy Dunlap
+M: rdunlap@xenotime.net
+L: linux-doc@vger.kernel.org
+S: Maintained
+
DOUBLETALK DRIVER
P: James R. Van Zandt
M: jrv@vanzandt.mv.com
@@ -1611,7 +1623,7 @@
P: Stephen Hemminger
M: shemminger@linux-foundation.org
L: bridge@lists.linux-foundation.org
-W: http://bridge.sourceforge.net/
+W: http://www.linux-foundation.org/en/Net:Bridge
S: Maintained
ETHERTEAM 16I DRIVER
@@ -1625,13 +1637,13 @@
EXT3 FILE SYSTEM
P: Stephen Tweedie, Andrew Morton
-M: sct@redhat.com, akpm@linux-foundation.org, adilger@clusterfs.com
+M: sct@redhat.com, akpm@linux-foundation.org, adilger@sun.com
L: linux-ext4@vger.kernel.org
S: Maintained
EXT4 FILE SYSTEM
P: Stephen Tweedie, Andrew Morton
-M: sct@redhat.com, akpm@linux-foundation.org, adilger@clusterfs.com
+M: sct@redhat.com, akpm@linux-foundation.org, adilger@sun.com
L: linux-ext4@vger.kernel.org
S: Maintained
@@ -1827,7 +1839,7 @@
HARMONY SOUND DRIVER
P: Kyle McMartin
-M: kyle@parisc-linux.org
+M: kyle@mcmartin.ca
L: linux-parisc@vger.kernel.org
S: Maintained
@@ -2427,9 +2439,10 @@
KS0108 LCD CONTROLLER DRIVER
P: Miguel Ojeda Sandonis
-M: maxextreme@gmail.com
+M: miguel.ojeda.sandonis@gmail.com
L: linux-kernel@vger.kernel.org
-W: http://auxdisplay.googlepages.com/
+W: http://miguelojeda.es/auxdisplay.htm
+W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
LAPB module
@@ -2473,9 +2486,11 @@
W: http://www.hansenpartnership.com/voyager
S: Maintained
-LINUX FOR POWERPC
+LINUX FOR POWERPC (32-BIT AND 64-BIT)
P: Paul Mackerras
M: paulus@samba.org
+P: Benjamin Herrenschmidt
+M: benh@kernel.crashing.org
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
T: git kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc.git
@@ -2515,13 +2530,6 @@
L: linuxppc-dev@ozlabs.org
S: Maintained
-LINUX FOR POWERPC BOOT CODE
-P: Tom Rini
-M: trini@kernel.crashing.org
-W: http://www.penguinppc.org/
-L: linuxppc-dev@ozlabs.org
-S: Maintained
-
LINUX FOR POWERPC EMBEDDED PPC8XX
P: Vitaly Bordug
M: vitb@kernel.crashing.org
@@ -2550,22 +2558,10 @@
M: acme@ghostprotocols.net
S: Maintained
-LINUX FOR 64BIT POWERPC
-P: Paul Mackerras
-M: paulus@samba.org
-M: paulus@au.ibm.com
-P: Anton Blanchard
-M: anton@samba.org
-M: anton@au.ibm.com
-W: http://www.penguinppc.org/ppc64/
-L: linuxppc-dev@ozlabs.org
-S: Supported
-
LINUX SECURITY MODULE (LSM) FRAMEWORK
P: Chris Wright
M: chrisw@sous-sol.org
L: linux-security-module@vger.kernel.org
-W: http://lsm.immunix.org
T: git kernel.org:/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
S: Supported
@@ -2680,8 +2676,8 @@
MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
P: Michael Kerrisk
M: mtk.manpages@gmail.com
-W: ftp://ftp.kernel.org/pub/linux/docs/manpages
-S: Maintained
+W: http://www.kernel.org/doc/man-pages
+S: Supported
MARVELL LIBERTAS WIRELESS DRIVER
P: Dan Williams
@@ -2814,6 +2810,12 @@
W: http://0pointer.de/lennart/tchibo.html
S: Maintained
+MULTIFUNCTION DEVICES (MFD)
+P: Samuel Ortiz
+M: sameo@openedhand.com
+L: linux-kernel@vger.kernel.org
+S: Supported
+
MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
P: Pierre Ossman
M: drzeus-mmc@drzeus.cx
@@ -2866,8 +2868,8 @@
NETEFFECT IWARP RNIC DRIVER (IW_NES)
P: Faisal Latif
M: flatif@neteffect.com
-P: Nishi Gupta
-M: ngupta@neteffect.com
+P: Chien Tung
+M: ctung@neteffect.com
P: Glenn Streiff
M: gstreiff@neteffect.com
L: general@lists.openfabrics.org
@@ -3080,8 +3082,8 @@
S: Maintained
OPROFILE
-P: Philippe Elie
-M: phil.el@wanadoo.fr
+P: Robert Richter
+M: robert.richter@amd.com
L: oprofile-list@lists.sf.net
S: Maintained
@@ -3121,7 +3123,7 @@
PARISC ARCHITECTURE
P: Kyle McMartin
-M: kyle@parisc-linux.org
+M: kyle@mcmartin.ca
P: Matthew Wilcox
M: matthew@wil.cx
P: Grant Grundler
@@ -3195,8 +3197,8 @@
S: Maintained
PER-TASK DELAY ACCOUNTING
-P: Shailabh Nagar
-M: nagar@watson.ibm.com
+P: Balbir Singh
+M: balbir@linux.vnet.ibm.com
L: linux-kernel@vger.kernel.org
S: Maintained
@@ -3265,7 +3267,7 @@
PPP OVER ETHERNET
P: Michal Ostrowski
-M: mostrows@speakeasy.net
+M: mostrows@earthlink.net
S: Maintained
PPP OVER L2TP
@@ -3330,9 +3332,11 @@
W: http://www.isely.net/pvrusb2/
S: Maintained
-PXA2xx SUPPORT
-P: Nicolas Pitre
-M: nico@cam.org
+PXA2xx/PXA3xx SUPPORT
+P: Eric Miao
+M: eric.miao@marvell.com
+P: Russell King
+M: linux@arm.linux.org.uk
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
@@ -3439,10 +3443,7 @@
S: Maintained
REISERFS FILE SYSTEM
-P: Hans Reiser
-M: reiserfs-dev@namesys.com
L: reiserfs-devel@vger.kernel.org
-W: http://www.namesys.com
S: Supported
RFKILL
@@ -3662,13 +3663,6 @@
L: netdev@vger.kernel.org
S: Maintained
-SIS 5513 IDE CONTROLLER DRIVER
-P: Lionel Bouton
-M: Lionel.Bouton@inet6.fr
-W: http://inet6.dyn.dhs.org/sponsoring/sis5513/index.html
-W: http://gyver.homeip.net/sis5513/index.html
-S: Maintained
-
SIS 900/7016 FAST ETHERNET DRIVER
P: Daniele Venzano
M: venza@brownhat.org
@@ -3696,7 +3690,7 @@
SLAB ALLOCATOR
P: Christoph Lameter
-M: clameter@sgi.com
+M: cl@linux-foundation.org
P: Pekka Enberg
M: penberg@cs.helsinki.fi
P: Matt Mackall
@@ -3906,8 +3900,8 @@
S: Maintained
TASKSTATS STATISTICS INTERFACE
-P: Shailabh Nagar
-M: nagar@watson.ibm.com
+P: Balbir Singh
+M: balbir@linux.vnet.ibm.com
L: linux-kernel@vger.kernel.org
S: Maintained
@@ -4003,7 +3997,8 @@
S: Maintained
TPM DEVICE DRIVER
-P: Kylene Hall
+P: Debora Velarde
+P: Rajiv Andrade
M: tpmdd-devel@lists.sourceforge.net
W: http://tpmdd.sourceforge.net
P: Marcel Selhorst
@@ -4034,7 +4029,7 @@
P: Grant Grundler
M: grundler@parisc-linux.org
P: Kyle McMartin
-M: kyle@parisc-linux.org
+M: kyle@mcmartin.ca
L: netdev@vger.kernel.org
S: Maintained
@@ -4322,6 +4317,14 @@
W: http://www.linux-usb.org/usbnet
S: Maintained
+USB VIDEO CLASS
+P: Laurent Pinchart
+M: laurent.pinchart@skynet.be
+L: linx-uvc-devel@berlios.de
+L: video4linux-list@redhat.com
+W: http://linux-uvc.berlios.de
+S: Maintained
+
USB W996[87]CF DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
@@ -4439,10 +4442,10 @@
S: Maintained
W83791D HARDWARE MONITORING DRIVER
-P: Charles Spirakis
-M: bezaur@gmail.com
+P: Marc Hulsman
+M: m.hulsman@tudelft.nl
L: lm-sensors@lm-sensors.org
-S: Odd Fixes
+S: Maintained
W83793 HARDWARE MONITORING DRIVER
P: Rudolf Marek
diff --git a/Makefile b/Makefile
index 8db70fe..e3c5eb6 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 26
-EXTRAVERSION = -rc4
-NAME = Funky Weasel is Jiggy wit it
+EXTRAVERSION =
+NAME = Rotary Wombat
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile
index 4e1a8e2..4759fe7 100644
--- a/arch/alpha/Makefile
+++ b/arch/alpha/Makefile
@@ -13,6 +13,7 @@
LDFLAGS_vmlinux := -static -N #-relax
CHECKFLAGS += -D__alpha__ -m64
cflags-y := -pipe -mno-fp-regs -ffixed-8 -msmall-data
+cflags-y += $(call cc-option, -fno-jump-tables)
cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4
cpuflags-$(CONFIG_ALPHA_EV5) := -mcpu=ev5
diff --git a/arch/alpha/kernel/core_t2.c b/arch/alpha/kernel/core_t2.c
index c075029..d9980d4 100644
--- a/arch/alpha/kernel/core_t2.c
+++ b/arch/alpha/kernel/core_t2.c
@@ -74,6 +74,8 @@
# define DBG(args)
#endif
+DEFINE_SPINLOCK(t2_hae_lock);
+
static volatile unsigned int t2_mcheck_any_expected;
static volatile unsigned int t2_mcheck_last_taken;
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index 36ab22a..5cf45fc 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -71,6 +71,23 @@
static void __init
quirk_cypress(struct pci_dev *dev)
{
+ /* The Notorious Cy82C693 chip. */
+
+ /* The generic legacy mode IDE fixup in drivers/pci/probe.c
+ doesn't work correctly with the Cypress IDE controller as
+ it has non-standard register layout. Fix that. */
+ if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) {
+ dev->resource[2].start = dev->resource[3].start = 0;
+ dev->resource[2].end = dev->resource[3].end = 0;
+ dev->resource[2].flags = dev->resource[3].flags = 0;
+ if (PCI_FUNC(dev->devfn) == 2) {
+ dev->resource[0].start = 0x170;
+ dev->resource[0].end = 0x177;
+ dev->resource[1].start = 0x376;
+ dev->resource[1].end = 0x376;
+ }
+ }
+
/* The Cypress bridge responds on the PCI bus in the address range
0xffff0000-0xffffffff (conventional x86 BIOS ROM). There is no
way to turn this off. The bridge also supports several extended
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index dc57790..c778779 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -447,7 +447,7 @@
/* Macro for exception fixup code to access integer registers. */
-#define una_reg(r) (regs->regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
+#define una_reg(r) (_regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
asmlinkage void
@@ -456,6 +456,7 @@
{
long error, tmp1, tmp2, tmp3, tmp4;
unsigned long pc = regs->pc - 4;
+ unsigned long *_regs = regs->regs;
const struct exception_table_entry *fixup;
unaligned[0].count++;
diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index f13249b..ef37fc1 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -25,6 +25,13 @@
} :kernel
_etext = .; /* End of text section */
+ NOTES :kernel :note
+ .dummy : {
+ *(.dummy)
+ } :kernel
+
+ RODATA
+
/* Exception table */
. = ALIGN(16);
__ex_table : {
@@ -33,13 +40,6 @@
__stop___ex_table = .;
}
- NOTES :kernel :note
- .dummy : {
- *(.dummy)
- } :kernel
-
- RODATA
-
/* Will be freed after init */
. = ALIGN(PAGE_SIZE);
/* Init code and data */
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index 67ea99e..dd3fbd6 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -33,10 +33,6 @@
bic r0, r0, #0x1000 @ clear Icache
mcr p15, 0, r0, c1, c0, 0
-#ifdef CONFIG_ARCH_COTULLA_IDP
- mov r7, #MACH_TYPE_COTULLA_IDP
-#endif
-
#ifdef CONFIG_ARCH_IXP2000
mov r1, #-1
mov r0, #0xd6000000
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 52fc6a8..2744673 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -650,7 +650,8 @@
EXPORT_SYMBOL(dma_unmap_sg);
EXPORT_SYMBOL(dma_sync_single_for_cpu);
EXPORT_SYMBOL(dma_sync_single_for_device);
-EXPORT_SYMBOL(dma_sync_sg);
+EXPORT_SYMBOL(dma_sync_sg_for_cpu);
+EXPORT_SYMBOL(dma_sync_sg_for_device);
EXPORT_SYMBOL(dmabounce_register_dev);
EXPORT_SYMBOL(dmabounce_unregister_dev);
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 02cede2..dbf68dc 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -42,7 +42,7 @@
#define GPMC_STATUS 0x54
#define GPMC_PREFETCH_CONFIG1 0x1e0
#define GPMC_PREFETCH_CONFIG2 0x1e4
-#define GPMC_PREFETCH_CONTROL 0x1e8
+#define GPMC_PREFETCH_CONTROL 0x1ec
#define GPMC_PREFETCH_STATUS 0x1f0
#define GPMC_ECC_CONFIG 0x1f4
#define GPMC_ECC_CONTROL 0x1f8
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 6d4416a..f5851d1 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -59,7 +59,7 @@
[2] = {
.start = CMX270_ETHIRQ,
.end = CMX270_ETHIRQ,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index edc4f07..9c57700 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -50,7 +50,7 @@
[2] = {
.start = EM_X270_ETHIRQ,
.end = EM_X270_ETHIRQ,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 00af7f2..0bb3198 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -330,7 +330,7 @@
mutex_unlock(&ssp_lock);
- if (ssp->port_id != port)
+ if (&ssp->node == &ssp_list)
return NULL;
return ssp;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index c2cbd66..ab4a9f5 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -467,8 +467,8 @@
static void tosa_poweroff(void)
{
- pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
- GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
+ gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
+ gpio_set_value(TOSA_GPIO_ON_RESET, 1);
mdelay(1000);
arm_machine_restart('h');
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 3e57428..8e813ed 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -74,6 +74,8 @@
void __cpuinit platform_secondary_init(unsigned int cpu)
{
+ trace_hardirqs_off();
+
/*
* the primary core may have used a "cross call" soft interrupt
* to get this processor out of WFI in the BootMonitor - make
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index c00eda5..39c637b 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -501,8 +501,6 @@
/* Enable some nice interrupts. */
OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
-
- dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
}
static void omap_disable_channel_irq(int lch)
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 917325b..6be0c50 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -254,7 +254,8 @@
}
/* helper function */
-static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end)
+static void __init
+__fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end)
{
if (cplb_data[i].psize) {
fill_cplbtab(t,
@@ -291,7 +292,8 @@
}
}
-static void __fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end)
+static void __init
+__fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end)
{
if (cplb_data[i].psize) {
fill_cplbtab(t,
diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c
index e698554..3a3e961 100644
--- a/arch/blackfin/kernel/gptimers.c
+++ b/arch/blackfin/kernel/gptimers.c
@@ -10,8 +10,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/blackfin.h>
#include <asm/gptimers.h>
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index 73647c1..07402f5 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -60,9 +60,14 @@
};
static struct irq_desc bad_irq_desc = {
+ .status = IRQ_DISABLED,
.chip = &bad_chip,
.handle_irq = handle_bad_irq,
.depth = 1,
+ .lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock),
+#ifdef CONFIG_SMP
+ .affinity = CPU_MASK_ALL
+#endif
};
int show_interrupts(struct seq_file *p, void *v)
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 7bfbd95..f061f51 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -67,7 +67,7 @@
CSYNC();
}
-void *saved_icplb_fault_addr, *saved_dcplb_fault_addr;
+unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
int kstack_depth_to_print = 48;
@@ -366,7 +366,7 @@
info.si_code = ILL_CPLB_MULHIT;
sig = SIGSEGV;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
- if (saved_dcplb_fault_addr < (void *)FIXED_CODE_START)
+ if (saved_dcplb_fault_addr < FIXED_CODE_START)
printk(KERN_NOTICE "NULL pointer access\n");
else
#endif
@@ -421,7 +421,7 @@
info.si_code = ILL_CPLB_MULHIT;
sig = SIGSEGV;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
- if (saved_icplb_fault_addr < (void *)FIXED_CODE_START)
+ if (saved_icplb_fault_addr < FIXED_CODE_START)
printk(KERN_NOTICE "Jump to NULL address\n");
else
#endif
@@ -939,8 +939,6 @@
oops_in_progress = 1;
- printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", saved_dcplb_fault_addr);
- printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", saved_icplb_fault_addr);
dump_bfin_process(fp);
dump_bfin_mem(fp);
show_regs(fp);
diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S
index 3daf960..4685b7a 100644
--- a/arch/blackfin/lib/outs.S
+++ b/arch/blackfin/lib/outs.S
@@ -76,4 +76,4 @@
R0 = R0 + R1;
.Lword8_loop_e: W[P0] = R0;
RTS;
-ENDPROC(_outsw)
+ENDPROC(_outsw_8)
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index bb6d58c..5958eec 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -451,9 +451,6 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
@@ -647,10 +644,10 @@
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
- .irq = IRQ_PF6,
+ .irq = IRQ_PF8,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 1,
+ .chip_select = 2,
.controller_data = &spi_ad7877_chip_info,
},
#endif
@@ -676,6 +673,7 @@
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
@@ -1018,10 +1016,7 @@
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 9d28415..079389c 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -87,9 +87,6 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
@@ -189,6 +186,7 @@
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -425,9 +423,7 @@
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index ec05b23..13ae495 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -161,9 +161,6 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
@@ -320,6 +317,7 @@
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -626,10 +624,8 @@
SSYNC();
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
#endif
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index 87e450f..c94f7a5 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -3,7 +3,7 @@
#
obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o
-obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o
+obj-$(CONFIG_BFIN537_STAMP) += stamp.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
obj-$(CONFIG_PNAV10) += pnav10.o
obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o
diff --git a/arch/blackfin/mach-bf537/boards/led.S b/arch/blackfin/mach-bf537/boards/led.S
deleted file mode 100644
index 4e9ea42..0000000
--- a/arch/blackfin/mach-bf537/boards/led.S
+++ /dev/null
@@ -1,183 +0,0 @@
-/****************************************************
- * LED1 ---- PF6 LED2 ---- PF7 *
- * LED3 ---- PF8 LED4 ---- PF9 *
- * LED5 ---- PF10 LED6 ---- PF11 *
- ****************************************************/
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-/* All functions in this file save the registers they uses.
- So there is no need to save any registers before calling them. */
-
- .text;
-
-/* Initialize LEDs. */
-
-ENTRY(_led_init)
- LINK 12;
- [--SP] = P0;
- [--SP] = R0;
- [--SP] = R1;
- [--SP] = R2;
- R1 = PF6|PF7|PF8|PF9|PF10|PF11 (Z);
- R2 = ~R1;
-
- P0.H = hi(PORTF_FER);
- P0.L = lo(PORTF_FER);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R2;
- W[P0] = R0.L;
- SSYNC;
-
- P0.H = hi(PORTFIO_DIR);
- P0.L = lo(PORTFIO_DIR);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 | R1;
- W[P0] = R0.L;
- SSYNC;
-
- P0.H = hi(PORTFIO_INEN);
- P0.L = lo(PORTFIO_INEN);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R2;
- W[P0] = R0.L;
- SSYNC;
-
- R2 = [SP++];
- R1 = [SP++];
- R0 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_init, .-_led_init
-
-/* Set one LED on. Leave other LEDs unchanged.
- It expects the LED number passed through R0. */
-
-ENTRY(_led_on)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 | R1;
- W[P0] = R0.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_on, .-_led_on
-
-/* Set one LED off. Leave other LEDs unchanged. */
-
-ENTRY(_led_off)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- R1 = ~R1;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R1;
- W[P0] = R0.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_off, .-_led_off
-
-/* Toggle one LED. Leave other LEDs unchanged. */
-
-ENTRY(_led_toggle)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 ^ R1;
- W[P0] = R0.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_toggle, .-_led_toggle
-
-/* Display the number using LEDs in binary format. */
-
-ENTRY(_led_disp_num)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- [--SP] = R2;
- CALL _led_init;
- R1 = 0x3f(X);
- R0 = R0 & R1;
- R2 = 6(X);
- R0 <<= R2;
- R1 <<= R2;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R2 = W[P0](Z);
- SSYNC;
- R1 = ~R1;
- R2 = R2 & R1;
- R2 = R2 | R0;
- W[P0] = R2.L;
- SSYNC;
- R2 = [SP++];
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_disp_num, .-_led_disp_num
-
-/* Toggle the number using LEDs in binary format. */
-
-ENTRY(_led_toggle_num)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- [--SP] = R2;
- CALL _led_init;
- R1 = 0x3f(X);
- R0 = R0 & R1;
- R1 = 6(X);
- R0 <<= R1;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R1 = W[P0](Z);
- SSYNC;
- R1 = R1 ^ R0;
- W[P0] = R1.L;
- SSYNC;
- R2 = [SP++];
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_toggle_num, .-_led_toggle_num
-
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9a756d1..671f9d6 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -400,9 +400,6 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
@@ -629,6 +626,7 @@
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
@@ -939,10 +937,7 @@
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/blackfin/mach-bf548/boards/Makefile b/arch/blackfin/mach-bf548/boards/Makefile
index eed161d..319ef54 100644
--- a/arch/blackfin/mach-bf548/boards/Makefile
+++ b/arch/blackfin/mach-bf548/boards/Makefile
@@ -2,5 +2,5 @@
# arch/blackfin/mach-bf548/boards/Makefile
#
-obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o
+obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN548_BLUETECHNIX_CM) += cm_bf548.o
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index 3b74f96..4f4ae87 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -684,7 +684,7 @@
static int __init cm_bf548_init(void)
{
- printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index d1682bb..af7c211 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -412,8 +412,6 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
/* SPI flash chip (m25p16) */
@@ -481,7 +479,7 @@
};
#endif
-static struct spi_board_info bf54x_spi_board_info[] __initdata = {
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
{
@@ -527,6 +525,7 @@
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -800,10 +799,7 @@
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bf54x_spi_board_info,
- ARRAY_SIZE(bf54x_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}
diff --git a/arch/blackfin/mach-bf548/boards/led.S b/arch/blackfin/mach-bf548/boards/led.S
deleted file mode 100644
index f47daf3..0000000
--- a/arch/blackfin/mach-bf548/boards/led.S
+++ /dev/null
@@ -1,172 +0,0 @@
-/****************************************************
- * LED1 ---- PG6 LED2 ---- PG7 *
- * LED3 ---- PG8 LED4 ---- PG9 *
- * LED5 ---- PG10 LED6 ---- PG11 *
- ****************************************************/
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-/* All functions in this file save the registers they uses.
- So there is no need to save any registers before calling them. */
-
- .text;
-
-/* Initialize LEDs. */
-
-ENTRY(_led_init)
- LINK 0;
- [--SP] = P0;
- [--SP] = R0;
- [--SP] = R1;
- [--SP] = R2;
- R1 = (PG6|PG7|PG8|PG9|PG10|PG11)(Z);
- R2 = ~R1;
-
- P0.H = hi(PORTG_FER);
- P0.L = lo(PORTG_FER);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R2;
- W[P0] = R0.L;
- SSYNC;
-
- P0.H = hi(PORTG_DIR_SET);
- P0.L = lo(PORTG_DIR_SET);
- W[P0] = R1.L;
- SSYNC;
-
- P0.H = hi(PORTG_INEN);
- P0.L = lo(PORTG_INEN);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R2;
- W[P0] = R0.L;
- SSYNC;
-
- R2 = [SP++];
- R1 = [SP++];
- R0 = [SP++];
- P0 = [SP++];
- RTS;
- .size _led_init, .-_led_init
-
-/* Set one LED on. Leave other LEDs unchanged.
- It expects the LED number passed through R0. */
-
-ENTRY(_led_on)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTG_SET);
- P0.L = lo(PORTG_SET);
- W[P0] = R1.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_on, .-_led_on
-
-/* Set one LED off. Leave other LEDs unchanged. */
-
-ENTRY(_led_off)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTG_CLEAR);
- P0.L = lo(PORTG_CLEAR);
- W[P0] = R1.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_off, .-_led_off
-
-/* Toggle one LED. Leave other LEDs unchanged. */
-
-ENTRY(_led_toggle)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTG);
- P0.L = lo(PORTG);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 ^ R1;
- W[P0] = R0.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_toggle, .-_led_toggle
-
-/* Display the number using LEDs in binary format. */
-
-ENTRY(_led_disp_num)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- [--SP] = R2;
- CALL _led_init;
- R1 = 0x3f(X);
- R0 = R0 & R1;
- R2 = 6(X);
- R0 <<= R2;
- R1 <<= R2;
- P0.H = hi(PORTG);
- P0.L = lo(PORTG);
- R2 = W[P0](Z);
- SSYNC;
- R1 = ~R1;
- R2 = R2 & R1;
- R2 = R2 | R0;
- W[P0] = R2.L;
- SSYNC;
- R2 = [SP++];
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_disp_num, .-_led_disp_num
-
-/* Toggle the number using LEDs in binary format. */
-
-ENTRY(_led_toggle_num)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- [--SP] = R2;
- CALL _led_init;
- R1 = 0x3f(X);
- R0 = R0 & R1;
- R1 = 6(X);
- R0 <<= R1;
- P0.H = hi(PORTG);
- P0.L = lo(PORTG);
- R1 = W[P0](Z);
- SSYNC;
- R1 = R1 ^ R0;
- W[P0] = R1.L;
- SSYNC;
- R2 = [SP++];
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_toggle_num, .-_led_toggle_num
-
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 61d8f76..bc6fede 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -280,7 +280,6 @@
};
#endif
-#ifdef CONFIG_SPI_BFIN
#if defined(CONFIG_SND_BLACKFIN_AD1836) \
|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
@@ -295,8 +294,8 @@
.bits_per_word = 8,
};
#endif
-#endif
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -327,6 +326,7 @@
.platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
+#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_SND_BLACKFIN_AD1836) \
@@ -537,10 +537,7 @@
SSYNC();
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/frv/kernel/cmode.S b/arch/frv/kernel/cmode.S
index 81ba28a..53deeb5 100644
--- a/arch/frv/kernel/cmode.S
+++ b/arch/frv/kernel/cmode.S
@@ -1,7 +1,7 @@
/* cmode.S: clock mode management
*
* Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Woodhouse (dwmw2@redhat.com)
+ * Written by David Woodhouse (dwmw2@infradead.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/arch/frv/kernel/sleep.S b/arch/frv/kernel/sleep.S
index c9b2d51..f67bf73 100644
--- a/arch/frv/kernel/sleep.S
+++ b/arch/frv/kernel/sleep.S
@@ -1,7 +1,7 @@
/* sleep.S: power saving mode entry
*
* Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Woodhouse (dwmw2@redhat.com)
+ * Written by David Woodhouse (dwmw2@infradead.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c
index 4985466..64ee58d 100644
--- a/arch/frv/mb93090-mb00/pci-dma-nommu.c
+++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -1,7 +1,7 @@
/* pci-dma-nommu.c: Dynamic DMA mapping support for the FRV
*
* Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Woodhouse (dwmw2@redhat.com)
+ * Written by David Woodhouse (dwmw2@infradead.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index 88f1a55..e67ee3f 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -57,6 +57,7 @@
core-$(CONFIG_IA64_HP_ZX1) += arch/ia64/dig/
core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/
core-$(CONFIG_IA64_SGI_SN2) += arch/ia64/sn/
+core-$(CONFIG_IA64_SGI_UV) += arch/ia64/uv/
core-$(CONFIG_KVM) += arch/ia64/kvm/
drivers-$(CONFIG_PCI) += arch/ia64/pci/
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 853d1f1..43687cc 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -465,7 +465,6 @@
printk(KERN_ERR
"ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n",
len, slit->header.length);
- memset(numa_slit, 10, sizeof(numa_slit));
return;
}
slit_table = slit;
@@ -574,8 +573,14 @@
printk(KERN_INFO "Number of memory chunks in system = %d\n",
num_node_memblks);
- if (!slit_table)
+ if (!slit_table) {
+ for (i = 0; i < MAX_NUMNODES; i++)
+ for (j = 0; j < MAX_NUMNODES; j++)
+ node_distance(i, j) = i == j ? LOCAL_DISTANCE :
+ REMOTE_DISTANCE;
return;
+ }
+
memset(numa_slit, -1, sizeof(numa_slit));
for (i = 0; i < slit_table->locality_count; i++) {
if (!pxm_bit_test(i))
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 082c31d..39752cd 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -558,8 +558,6 @@
if (!iosapic_kmalloc_ok && list_empty(&free_rte_list)) {
rte = alloc_bootmem(sizeof(struct iosapic_rte_info) *
NR_PREALLOCATE_RTE_ENTRIES);
- if (!rte)
- return NULL;
for (i = 0; i < NR_PREALLOCATE_RTE_ENTRIES; i++, rte++)
list_add(&rte->rte_list, &free_rte_list);
}
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 71d0513..7714a97 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -1864,11 +1864,6 @@
* invoked after, it will find an empty queue and no
* signal will be sent. In both case, we are safe
*/
- if (filp->f_flags & FASYNC) {
- DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue));
- pfm_do_fasync (-1, filp, ctx, 0);
- }
-
PROTECT_CTX(ctx, flags);
state = ctx->ctx_state;
@@ -1999,6 +1994,11 @@
return -EBADF;
}
+ if (filp->f_flags & FASYNC) {
+ DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue));
+ pfm_do_fasync(-1, filp, ctx, 0);
+ }
+
PROTECT_CTX(ctx, flags);
state = ctx->ctx_state;
diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c
index 7e02597..0464173 100644
--- a/arch/ia64/kernel/sal.c
+++ b/arch/ia64/kernel/sal.c
@@ -252,11 +252,10 @@
local_irq_save(flags);
/*
- * Schedule a timer interrupt, wait until it's reported, and see if
- * SAL_CACHE_FLUSH drops it.
+ * Send ourselves a timer interrupt, wait until it's reported, and see
+ * if SAL_CACHE_FLUSH drops it.
*/
- ia64_set_itv(IA64_TIMER_VECTOR);
- ia64_set_itm(ia64_get_itc() + 1000);
+ platform_send_ipi(cpu, IA64_TIMER_VECTOR, IA64_IPI_DM_INT, 0);
while (!ia64_get_irr(IA64_TIMER_VECTOR))
cpu_relax();
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index f48a809..632cda8 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -547,7 +547,8 @@
# ifdef CONFIG_ACPI_NUMA
acpi_numa_init();
per_cpu_scan_finalize((cpus_weight(early_cpu_possible_map) == 0 ?
- 32 : cpus_weight(early_cpu_possible_map)), additional_cpus);
+ 32 : cpus_weight(early_cpu_possible_map)),
+ additional_cpus > 0 ? additional_cpus : 0);
# endif
#else
# ifdef CONFIG_SMP
@@ -578,8 +579,6 @@
cpu_init(); /* initialize the bootstrap CPU */
mmu_context_init(); /* initialize context_id bitmap */
- check_sal_cache_flush();
-
#ifdef CONFIG_ACPI
acpi_boot_init();
#endif
@@ -607,6 +606,7 @@
ia64_mca_init();
platform_setup(cmdline_p);
+ check_sal_cache_flush();
paging_init();
}
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 8c73643..aad1b7b 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -117,6 +117,7 @@
local_irq_restore(flags);
}
+EXPORT_SYMBOL_GPL(account_system_vtime);
/*
* Called from the timer interrupt handler to charge accumulated user time
diff --git a/arch/ia64/kvm/mmio.c b/arch/ia64/kvm/mmio.c
index 351bf70..7f1a858 100644
--- a/arch/ia64/kvm/mmio.c
+++ b/arch/ia64/kvm/mmio.c
@@ -159,7 +159,8 @@
if (p->u.ioreq.state == STATE_IORESP_READY) {
if (dir == IOREQ_READ)
- *dest = p->u.ioreq.data;
+ /* it's necessary to ensure zero extending */
+ *dest = p->u.ioreq.data & (~0UL >> (64-(s*8)));
} else
panic_vm(vcpu);
out:
diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c
index 49d3120..e585f9a 100644
--- a/arch/ia64/sn/kernel/sn2/sn2_smp.c
+++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c
@@ -512,6 +512,8 @@
int cpu;
char optstr[64];
+ if (count == 0 || count > sizeof(optstr))
+ return -EINVAL;
if (copy_from_user(optstr, user, count))
return -EFAULT;
optstr[count - 1] = '\0';
diff --git a/arch/ia64/uv/kernel/setup.c b/arch/ia64/uv/kernel/setup.c
index 9aa7432..cf5f28a 100644
--- a/arch/ia64/uv/kernel/setup.c
+++ b/arch/ia64/uv/kernel/setup.c
@@ -17,6 +17,9 @@
DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
+#ifdef CONFIG_IA64_SGI_UV
+int sn_prom_type;
+#endif
struct redir_addr {
unsigned long redirect;
@@ -64,6 +67,15 @@
m_n_config.s.m_skt = 37;
m_n_config.s.n_skt = 0;
mmr_base = 0;
+#if 0
+ /* Need BIOS calls - TDB */
+ if (!ia64_sn_is_fake_prom())
+ sn_prom_type = 1;
+ else
+#endif
+ sn_prom_type = 2;
+ printk(KERN_INFO "Running on medusa with %s PROM\n",
+ (sn_prom_type == 1) ? "real" : "fake");
} else {
get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
node_id.v = uv_read_local_mmr(UVH_NODE_ID);
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index dca50da..8e2a0f5 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:41 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index c3cd5b7..e2d511e 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:42 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 073ae4b..6e20d65 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:43 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index 0789ede..a0a9b30 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:45 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 3e140bf..6778041 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:46 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index ba3a917..7cd3757 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:47 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index 4d23f99..0747fa3 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:42:31 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index 188847f..e7a8246 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:49 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index 983e53d..ab536eb 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:50 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 7707f3f..e05be68 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:51 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index a765f6f..296340d 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:53 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 4315139..8d3a416 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:54 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c
index ba5a9f3..454f254 100644
--- a/arch/m68knommu/platform/coldfire/timers.c
+++ b/arch/m68knommu/platform/coldfire/timers.c
@@ -111,7 +111,13 @@
__raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
mcftmr_cycles_per_jiffy = FREQ / HZ;
- __raw_writetrr(mcftmr_cycles_per_jiffy, TA(MCFTIMER_TRR));
+ /*
+ * The coldfire timer runs from 0 to TRR included, then 0
+ * again and so on. It counts thus actually TRR + 1 steps
+ * for 1 tick, not TRR. So if you want n cycles,
+ * initialize TRR with n - 1.
+ */
+ __raw_writetrr(mcftmr_cycles_per_jiffy - 1, TA(MCFTIMER_TRR));
__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e5a7c5d..24c5dee 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1006,7 +1006,7 @@
config MIPS_L1_CACHE_SHIFT
int
default "4" if MACH_DECSTATION
- default "7" if SGI_IP27 || SGI_IP28 || SNI_RM
+ default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM
default "4" if PMC_MSP4200_EVAL
default "5"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 69648d0..ad36c94 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -538,19 +538,19 @@
# Sibyte SWARM board
# Sibyte BCM91x80 (BigSur) board
#
-libs-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_CRHINE) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_CRHONE) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_RHONE) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000
#
@@ -565,7 +565,11 @@
#
core-$(CONFIG_SNI_RM) += arch/mips/sni/
cflags-$(CONFIG_SNI_RM) += -Iinclude/asm-mips/mach-rm
+ifdef CONFIG_CPU_LITTLE_ENDIAN
load-$(CONFIG_SNI_RM) += 0xffffffff80600000
+else
+load-$(CONFIG_SNI_RM) += 0xffffffff80030000
+endif
all-$(CONFIG_SNI_RM) := vmlinux.ecoff
#
diff --git a/arch/mips/au1000/common/clocks.c b/arch/mips/au1000/common/clocks.c
index 46f8ee0..043429d 100644
--- a/arch/mips/au1000/common/clocks.c
+++ b/arch/mips/au1000/common/clocks.c
@@ -45,6 +45,7 @@
{
return au1x00_clock;
}
+EXPORT_SYMBOL(get_au1x00_speed);
/*
* The UART baud base is not known at compile time ... if
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index 42d5552..601ee91 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -216,6 +216,17 @@
}
EXPORT_SYMBOL(au1xxx_ddma_add_device);
+void au1xxx_ddma_del_device(u32 devid)
+{
+ dbdev_tab_t *p = find_dbdev_id(devid);
+
+ if (p != NULL) {
+ memset(p, 0, sizeof(dbdev_tab_t));
+ p->dev_id = ~0;
+ }
+}
+EXPORT_SYMBOL(au1xxx_ddma_del_device);
+
/* Allocate a channel and return a non-zero descriptor if successful. */
u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
void (*callback)(int, void *), void *callparam)
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 8cae775..74d6d4a 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -165,12 +165,12 @@
static struct resource au1xxx_mmc_resources[] = {
[0] = {
.start = SD0_PHYS_ADDR,
- .end = SD0_PHYS_ADDR + 0x40,
+ .end = SD0_PHYS_ADDR + 0x7ffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = SD1_PHYS_ADDR,
- .end = SD1_PHYS_ADDR + 0x40,
+ .end = SD1_PHYS_ADDR + 0x7ffff,
.flags = IORESOURCE_MEM,
},
[2] = {
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 117470b..4b87998 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -1,67 +1,58 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:40 2007
+# Linux kernel version: 2.6.25
+# Sat May 3 00:38:11 2008
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-CONFIG_SIBYTE_SWARM=y
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+CONFIG_SIBYTE_SWARM=y
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
CONFIG_SIBYTE_SB1250=y
CONFIG_SIBYTE_SB1xxx_SOC=y
-CONFIG_CPU_SB1_PASS_1=y
+# CONFIG_CPU_SB1_PASS_1 is not set
# CONFIG_CPU_SB1_PASS_2_1250 is not set
-# CONFIG_CPU_SB1_PASS_2_2 is not set
+CONFIG_CPU_SB1_PASS_2_2=y
# CONFIG_CPU_SB1_PASS_4 is not set
# CONFIG_CPU_SB1_PASS_2_112x is not set
# CONFIG_CPU_SB1_PASS_3 is not set
CONFIG_SIBYTE_HAS_LDT=y
+CONFIG_SIBYTE_ENABLE_LDT_IF_PCI=y
# CONFIG_SIMULATION is not set
# CONFIG_SB1_CEX_ALWAYS_FATAL is not set
# CONFIG_SB1_CERR_STALL is not set
@@ -69,20 +60,32 @@
# CONFIG_SIBYTE_CFE_CONSOLE is not set
# CONFIG_SIBYTE_BUS_WATCHER is not set
# CONFIG_SIBYTE_TBPROF is not set
+CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_CEVT_SB1250=y
+CONFIG_CSRC_SB1250=y
+CONFIG_CFE=y
CONFIG_DMA_COHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -90,6 +93,7 @@
#
# CPU selection
#
+# CONFIG_CPU_LOONGSON2 is not set
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
@@ -130,8 +134,7 @@
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_SB1_PASS_1_WORKAROUNDS=y
+CONFIG_SB1_PASS_2_WORKAROUNDS=y
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
@@ -140,6 +143,7 @@
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_SYS_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -147,13 +151,19 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
CONFIG_SMP=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_NR_CPUS_DEFAULT_2=y
CONFIG_NR_CPUS=2
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
@@ -166,38 +176,49 @@
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
# CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=15
CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
CONFIG_CPUSETS=y
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_CGROUP_CPUACCT=y
+# CONFIG_RESOURCE_COUNTERS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_PROC_PID_CPUSET is not set
CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -209,20 +230,29 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
@@ -230,12 +260,10 @@
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
@@ -249,22 +277,19 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_ZONE_DMA32=y
# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
# CONFIG_HOTPLUG_PCI is not set
#
@@ -272,7 +297,6 @@
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
@@ -286,7 +310,6 @@
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# Networking
@@ -296,7 +319,6 @@
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -304,6 +326,7 @@
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
@@ -326,6 +349,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -333,24 +357,15 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -363,26 +378,52 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_RFKILL=m
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -391,34 +432,15 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -427,49 +449,77 @@
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=9220
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=m
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDE_SWARM=y
-# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -477,89 +527,68 @@
#
CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_BROADCOM_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -568,53 +597,70 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
+# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH5K is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWL4965 is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
#
-# Wan interfaces
+# USB Network Adapters
#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -637,24 +683,8 @@
# Character devices
#
# CONFIG_VT is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-CONFIG_MOXA_SMARTIO_NEW=m
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-CONFIG_SERIAL_SB1250_DUART=y
-CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -664,37 +694,22 @@
#
# Non-8250 serial port support
#
+CONFIG_SERIAL_SB1250_DUART=y
+CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
@@ -702,109 +717,139 @@
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Hardware Monitoring support
+# Sonics Silicon Backplane
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
-# USB Gadget Support
+# may also be needed; see USB_STORAGE Help for more information
#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
#
-# DMA Engine support
+# Userspace I/O
#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
+# CONFIG_UIO is not set
#
# File systems
@@ -823,15 +868,14 @@
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
@@ -853,9 +897,9 @@
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
@@ -871,14 +915,13 @@
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -890,6 +933,7 @@
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -897,45 +941,29 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
# CONFIG_DLM_DEBUG is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SAMPLES is not set
CONFIG_CMDLINE=""
CONFIG_SYS_SUPPORTS_KGDB=y
# CONFIG_SB1XXX_CORELIS is not set
@@ -946,13 +974,12 @@
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
@@ -970,6 +997,11 @@
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
@@ -983,15 +1015,16 @@
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
@@ -999,10 +1032,15 @@
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig
index af82e1a..8dd3ae3 100644
--- a/arch/mips/configs/tb0219_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Wed Aug 8 16:11:47 2007
+# Linux kernel version: 2.6.26-rc1
+# Mon May 12 11:54:51 2008
#
CONFIG_MIPS=y
@@ -10,9 +10,11 @@
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
@@ -26,6 +28,7 @@
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
@@ -53,12 +56,17 @@
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_HOTPLUG_CPU is not set
@@ -113,6 +121,7 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -120,10 +129,16 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
@@ -156,23 +171,29 @@
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -185,10 +206,19 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
@@ -212,18 +242,17 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -237,6 +266,7 @@
#
# Power management options
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
#
@@ -278,6 +308,7 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -285,15 +316,10 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -306,10 +332,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -317,6 +339,7 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -339,6 +362,7 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
@@ -360,10 +384,11 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -375,10 +400,6 @@
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
@@ -394,6 +415,7 @@
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
@@ -409,7 +431,8 @@
CONFIG_SMSC_PHY=m
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
@@ -420,6 +443,10 @@
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
@@ -427,7 +454,6 @@
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
@@ -439,6 +465,7 @@
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -451,6 +478,10 @@
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -472,6 +503,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -480,14 +512,12 @@
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -506,7 +536,6 @@
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -533,7 +562,9 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -552,52 +583,62 @@
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_GPIO_TB0219=y
-# CONFIG_DRM is not set
CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
@@ -616,6 +657,7 @@
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -624,15 +666,18 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -665,10 +710,6 @@
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -694,17 +735,11 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -729,9 +764,10 @@
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -740,23 +776,6 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_VR41XX=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -771,20 +790,16 @@
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
@@ -813,7 +828,6 @@
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -828,24 +842,21 @@
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -866,47 +877,38 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index a95385b..2ba240e 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Thu Aug 9 11:16:55 2007
+# Linux kernel version: 2.6.26-rc1
+# Mon May 12 11:53:54 2008
#
CONFIG_MIPS=y
@@ -10,9 +10,11 @@
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
@@ -26,6 +28,7 @@
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
@@ -53,12 +56,17 @@
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_HOTPLUG_CPU is not set
@@ -113,6 +121,7 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -120,10 +129,16 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
@@ -156,23 +171,29 @@
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -185,10 +206,19 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
@@ -212,18 +242,17 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -237,6 +266,7 @@
#
# Power management options
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
#
@@ -277,6 +307,7 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -284,15 +315,10 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -305,10 +331,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -316,6 +338,7 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -338,6 +361,7 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
@@ -359,10 +383,11 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -402,18 +427,13 @@
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -428,6 +448,7 @@
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -440,6 +461,10 @@
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
@@ -447,7 +472,6 @@
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
@@ -455,6 +479,7 @@
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -470,6 +495,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -478,7 +504,6 @@
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
@@ -486,7 +511,6 @@
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -505,7 +529,6 @@
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -532,7 +555,9 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -551,52 +576,62 @@
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_GPIO_TB0219 is not set
-# CONFIG_DRM is not set
CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
@@ -615,6 +650,7 @@
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -623,15 +659,18 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -657,13 +696,16 @@
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -676,10 +718,6 @@
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -705,17 +743,11 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -740,9 +772,10 @@
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -751,23 +784,6 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_VR41XX=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -782,14 +798,11 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
@@ -818,7 +831,6 @@
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -833,24 +845,21 @@
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -871,47 +880,38 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=32M console=ttyVR0,115200"
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200"
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=m
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index 40d4a40a..a5d0f3c 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Thu Aug 9 14:03:54 2007
+# Linux kernel version: 2.6.26-rc1
+# Mon May 12 11:55:55 2008
#
CONFIG_MIPS=y
@@ -10,9 +10,11 @@
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
@@ -26,6 +28,7 @@
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
@@ -53,12 +56,17 @@
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_HOTPLUG_CPU is not set
@@ -113,6 +121,7 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -120,10 +129,16 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
@@ -156,12 +171,15 @@
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -173,6 +191,8 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -185,10 +205,19 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
@@ -212,18 +241,17 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -237,6 +265,7 @@
#
# Power management options
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
#
@@ -278,6 +307,7 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
@@ -302,8 +332,6 @@
CONFIG_DEFAULT_TCP_CONG="bic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -320,10 +348,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -331,6 +355,7 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -353,6 +378,7 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
@@ -374,10 +400,11 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -416,10 +443,14 @@
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -429,7 +460,6 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -458,7 +488,9 @@
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
@@ -472,15 +504,9 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -520,6 +546,7 @@
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -532,6 +559,10 @@
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
@@ -539,7 +570,6 @@
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
@@ -551,6 +581,7 @@
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -563,6 +594,10 @@
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -584,6 +619,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -592,7 +628,6 @@
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
@@ -600,7 +635,6 @@
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -622,7 +656,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -649,7 +682,9 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -668,49 +703,53 @@
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_GPIO_TB0219 is not set
-# CONFIG_DRM is not set
CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
@@ -719,9 +758,11 @@
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
@@ -757,7 +798,14 @@
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
CONFIG_FB_SM501=y
+# CONFIG_FB_COBALT is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -787,6 +835,7 @@
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
@@ -807,6 +856,7 @@
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -815,15 +865,18 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -849,13 +902,16 @@
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -868,10 +924,6 @@
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -896,36 +948,14 @@
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -940,25 +970,21 @@
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
-# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
@@ -987,7 +1013,6 @@
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -1002,24 +1027,21 @@
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1040,47 +1062,38 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
diff --git a/arch/mips/fw/arc/identify.c b/arch/mips/fw/arc/identify.c
index 28dfd2e..2306698 100644
--- a/arch/mips/fw/arc/identify.c
+++ b/arch/mips/fw/arc/identify.c
@@ -67,6 +67,11 @@
.liname = "SNI RM200_PCI",
.type = MACH_SNI_RM200_PCI,
.flags = PROM_FLAG_DONT_FREE_TEMP,
+ }, {
+ .arcname = "RM200PCI-R5K",
+ .liname = "SNI RM200_PCI-R5K",
+ .type = MACH_SNI_RM200_PCI,
+ .flags = PROM_FLAG_DONT_FREE_TEMP,
}
};
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index cc02440..65e46a6 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -30,7 +30,6 @@
obj-$(CONFIG_CPU_MIPS32) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_MIPS64) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o
-obj-$(CONFIG_CPU_R4000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R4300) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o
diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c
index 795cb8f..b5fc4eb 100644
--- a/arch/mips/kernel/cevt-txx9.c
+++ b/arch/mips/kernel/cevt-txx9.c
@@ -161,6 +161,9 @@
struct txx9_tmr_reg __iomem *tmrptr;
tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg));
+ /* Start once to make CounterResetEnable effective */
+ __raw_writel(TXx9_TMTCR_CRE | TXx9_TMTCR_TCE, &tmrptr->tcr);
+ /* Stop and reset the counter */
__raw_writel(TXx9_TMTCR_CRE, &tmrptr->tcr);
__raw_writel(0, &tmrptr->tisr);
__raw_writel(0xffffffff, &tmrptr->cpra);
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 63370cd..cdf87a9 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -216,6 +216,7 @@
{
return smp_call_function_mask(cpu_online_map, func, info, retry, wait);
}
+EXPORT_SYMBOL(smp_call_function);
void smp_call_function_interrupt(void)
{
@@ -271,6 +272,7 @@
put_cpu();
return 0;
}
+EXPORT_SYMBOL(smp_call_function_single);
static void stop_this_cpu(void *dummy)
{
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index cb8b0e2..f9165d1 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -88,15 +88,17 @@
#ifdef CONFIG_KALLSYMS
printk("\n");
#endif
-#define IS_KVA01(a) ((((unsigned int)a) & 0xc0000000) == 0x80000000)
- if (IS_KVA01(sp)) {
- while (!kstack_end(sp)) {
- addr = *sp++;
- if (__kernel_text_address(addr))
- print_ip_sym(addr);
+ while (!kstack_end(sp)) {
+ unsigned long __user *p =
+ (unsigned long __user *)(unsigned long)sp++;
+ if (__get_user(addr, p)) {
+ printk(" (Bad stack address)");
+ break;
}
- printk("\n");
+ if (__kernel_text_address(addr))
+ print_ip_sym(addr);
}
+ printk("\n");
}
#ifdef CONFIG_KALLSYMS
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
index cfeab66..a56c150 100644
--- a/arch/mips/lasat/interrupt.c
+++ b/arch/mips/lasat/interrupt.c
@@ -34,11 +34,13 @@
void disable_lasat_irq(unsigned int irq_nr)
{
+ irq_nr -= LASAT_IRQ_BASE;
*lasat_int_mask &= ~(1 << irq_nr) << lasat_int_mask_shift;
}
void enable_lasat_irq(unsigned int irq_nr)
{
+ irq_nr -= LASAT_IRQ_BASE;
*lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift;
}
diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c
index ec2f658..31e328b 100644
--- a/arch/mips/lasat/lasat_board.c
+++ b/arch/mips/lasat/lasat_board.c
@@ -23,18 +23,19 @@
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ctype.h>
+#include <linux/mutex.h>
#include <asm/bootinfo.h>
#include <asm/addrspace.h>
#include "at93c.h"
/* New model description table */
#include "lasat_models.h"
+static DEFINE_MUTEX(lasat_eeprom_mutex);
+
#define EEPROM_CRC(data, len) (~crc32(~0, data, len))
struct lasat_info lasat_board_info;
-void update_bcastaddr(void);
-
int EEPROMRead(unsigned int pos, unsigned char *data, int len)
{
int i;
@@ -258,10 +259,6 @@
sprintf(lasat_board_info.li_typestr, "%d", 10 * c);
}
-#if defined(CONFIG_INET) && defined(CONFIG_SYSCTL)
- update_bcastaddr();
-#endif
-
return 0;
}
@@ -269,6 +266,8 @@
{
unsigned long crc;
+ mutex_lock(&lasat_eeprom_mutex);
+
/* Generate the CRC */
crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info),
sizeof(struct lasat_eeprom_struct) - 4);
@@ -277,4 +276,6 @@
/* Write the EEPROM info */
EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
sizeof(struct lasat_eeprom_struct));
+
+ mutex_unlock(&lasat_eeprom_mutex);
}
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
index 389336c..866881e 100644
--- a/arch/mips/lasat/sysctl.c
+++ b/arch/mips/lasat/sysctl.c
@@ -29,15 +29,13 @@
#include <linux/string.h>
#include <linux/net.h>
#include <linux/inet.h>
-#include <linux/mutex.h>
#include <linux/uaccess.h>
#include <asm/time.h>
-#include "sysctl.h"
+#ifdef CONFIG_DS1603
#include "ds1603.h"
-
-static DEFINE_MUTEX(lasat_info_mutex);
+#endif
/* Strategy function to write EEPROM after changing string entry */
int sysctl_lasatstring(ctl_table *table, int *name, int nlen,
@@ -46,18 +44,15 @@
{
int r;
- mutex_lock(&lasat_info_mutex);
r = sysctl_string(table, name,
nlen, oldval, oldlenp, newval, newlen);
- if (r < 0) {
- mutex_unlock(&lasat_info_mutex);
+ if (r < 0)
return r;
- }
+
if (newval && newlen)
lasat_write_eeprom_info();
- mutex_unlock(&lasat_info_mutex);
- return 1;
+ return 0;
}
@@ -67,14 +62,11 @@
{
int r;
- mutex_lock(&lasat_info_mutex);
r = proc_dostring(table, write, filp, buffer, lenp, ppos);
- if ((!write) || r) {
- mutex_unlock(&lasat_info_mutex);
+ if ((!write) || r)
return r;
- }
+
lasat_write_eeprom_info();
- mutex_unlock(&lasat_info_mutex);
return 0;
}
@@ -85,28 +77,24 @@
{
int r;
- mutex_lock(&lasat_info_mutex);
r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
- if ((!write) || r) {
- mutex_unlock(&lasat_info_mutex);
+ if ((!write) || r)
return r;
- }
+
lasat_write_eeprom_info();
- mutex_unlock(&lasat_info_mutex);
return 0;
}
+#ifdef CONFIG_DS1603
static int rtctmp;
-#ifdef CONFIG_DS1603
/* proc function to read/write RealTime Clock */
int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
void *buffer, size_t *lenp, loff_t *ppos)
{
int r;
- mutex_lock(&lasat_info_mutex);
if (!write) {
rtctmp = read_persistent_clock();
/* check for time < 0 and set to 0 */
@@ -114,12 +102,11 @@
rtctmp = 0;
}
r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
- if ((!write) || r) {
- mutex_unlock(&lasat_info_mutex);
+ if (r)
return r;
- }
- rtc_mips_set_mmss(rtctmp);
- mutex_unlock(&lasat_info_mutex);
+
+ if (write)
+ rtc_mips_set_mmss(rtctmp);
return 0;
}
@@ -132,17 +119,14 @@
{
int r;
- mutex_lock(&lasat_info_mutex);
r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
- if (r < 0) {
- mutex_unlock(&lasat_info_mutex);
+ if (r < 0)
return r;
- }
+
if (newval && newlen)
lasat_write_eeprom_info();
- mutex_unlock(&lasat_info_mutex);
- return 1;
+ return 0;
}
#ifdef CONFIG_DS1603
@@ -153,50 +137,27 @@
{
int r;
- mutex_lock(&lasat_info_mutex);
rtctmp = read_persistent_clock();
if (rtctmp < 0)
rtctmp = 0;
r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
- if (r < 0) {
- mutex_unlock(&lasat_info_mutex);
+ if (r < 0)
return r;
- }
if (newval && newlen)
rtc_mips_set_mmss(rtctmp);
- mutex_unlock(&lasat_info_mutex);
- return 1;
+ return r;
}
#endif
#ifdef CONFIG_INET
-static char lasat_bcastaddr[16];
-
-void update_bcastaddr(void)
-{
- unsigned int ip;
-
- ip = (lasat_board_info.li_eeprom_info.ipaddr &
- lasat_board_info.li_eeprom_info.netmask) |
- ~lasat_board_info.li_eeprom_info.netmask;
-
- sprintf(lasat_bcastaddr, "%d.%d.%d.%d",
- (ip) & 0xff,
- (ip >> 8) & 0xff,
- (ip >> 16) & 0xff,
- (ip >> 24) & 0xff);
-}
-
-static char proc_lasat_ipbuf[32];
-
-/* Parsing of IP address */
int proc_lasat_ip(ctl_table *table, int write, struct file *filp,
void *buffer, size_t *lenp, loff_t *ppos)
{
unsigned int ip;
char *p, c;
int len;
+ char ipbuf[32];
if (!table->data || !table->maxlen || !*lenp ||
(*ppos && !write)) {
@@ -204,117 +165,88 @@
return 0;
}
- mutex_lock(&lasat_info_mutex);
if (write) {
len = 0;
p = buffer;
while (len < *lenp) {
- if (get_user(c, p++)) {
- mutex_unlock(&lasat_info_mutex);
+ if (get_user(c, p++))
return -EFAULT;
- }
if (c == 0 || c == '\n')
break;
len++;
}
- if (len >= sizeof(proc_lasat_ipbuf)-1)
- len = sizeof(proc_lasat_ipbuf) - 1;
- if (copy_from_user(proc_lasat_ipbuf, buffer, len)) {
- mutex_unlock(&lasat_info_mutex);
+ if (len >= sizeof(ipbuf)-1)
+ len = sizeof(ipbuf) - 1;
+ if (copy_from_user(ipbuf, buffer, len))
return -EFAULT;
- }
- proc_lasat_ipbuf[len] = 0;
+ ipbuf[len] = 0;
*ppos += *lenp;
/* Now see if we can convert it to a valid IP */
- ip = in_aton(proc_lasat_ipbuf);
+ ip = in_aton(ipbuf);
*(unsigned int *)(table->data) = ip;
lasat_write_eeprom_info();
} else {
ip = *(unsigned int *)(table->data);
- sprintf(proc_lasat_ipbuf, "%d.%d.%d.%d",
+ sprintf(ipbuf, "%d.%d.%d.%d",
(ip) & 0xff,
(ip >> 8) & 0xff,
(ip >> 16) & 0xff,
(ip >> 24) & 0xff);
- len = strlen(proc_lasat_ipbuf);
+ len = strlen(ipbuf);
if (len > *lenp)
len = *lenp;
if (len)
- if (copy_to_user(buffer, proc_lasat_ipbuf, len)) {
- mutex_unlock(&lasat_info_mutex);
+ if (copy_to_user(buffer, ipbuf, len))
return -EFAULT;
- }
if (len < *lenp) {
- if (put_user('\n', ((char *) buffer) + len)) {
- mutex_unlock(&lasat_info_mutex);
+ if (put_user('\n', ((char *) buffer) + len))
return -EFAULT;
- }
len++;
}
*lenp = len;
*ppos += len;
}
- update_bcastaddr();
- mutex_unlock(&lasat_info_mutex);
return 0;
}
-#endif /* defined(CONFIG_INET) */
+#endif
-static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen,
+static int sysctl_lasat_prid(ctl_table *table, int *name, int nlen,
void *oldval, size_t *oldlenp,
void *newval, size_t newlen)
{
int r;
- mutex_lock(&lasat_info_mutex);
r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
- if (r < 0) {
- mutex_unlock(&lasat_info_mutex);
+ if (r < 0)
return r;
- }
-
if (newval && newlen) {
- if (name && *name == LASAT_PRID)
- lasat_board_info.li_eeprom_info.prid = *(int *)newval;
-
+ lasat_board_info.li_eeprom_info.prid = *(int *)newval;
lasat_write_eeprom_info();
lasat_init_board_info();
}
- mutex_unlock(&lasat_info_mutex);
-
return 0;
}
-int proc_lasat_eeprom_value(ctl_table *table, int write, struct file *filp,
+int proc_lasat_prid(ctl_table *table, int write, struct file *filp,
void *buffer, size_t *lenp, loff_t *ppos)
{
int r;
- mutex_lock(&lasat_info_mutex);
r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
- if ((!write) || r) {
- mutex_unlock(&lasat_info_mutex);
+ if (r < 0)
return r;
+ if (write) {
+ lasat_board_info.li_eeprom_info.prid =
+ lasat_board_info.li_prid;
+ lasat_write_eeprom_info();
+ lasat_init_board_info();
}
- if (filp && filp->f_path.dentry) {
- if (!strcmp(filp->f_path.dentry->d_name.name, "prid"))
- lasat_board_info.li_eeprom_info.prid =
- lasat_board_info.li_prid;
- if (!strcmp(filp->f_path.dentry->d_name.name, "debugaccess"))
- lasat_board_info.li_eeprom_info.debugaccess =
- lasat_board_info.li_debugaccess;
- }
- lasat_write_eeprom_info();
- mutex_unlock(&lasat_info_mutex);
-
return 0;
}
extern int lasat_boot_to_service;
-#ifdef CONFIG_SYSCTL
-
static ctl_table lasat_table[] = {
{
.ctl_name = CTL_UNNUMBERED,
@@ -349,8 +281,8 @@
.data = &lasat_board_info.li_prid,
.maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = &proc_lasat_eeprom_value,
- .strategy = &sysctl_lasat_eeprom_value
+ .proc_handler = &proc_lasat_prid,
+ .strategy = &sysctl_lasat_prid
},
#ifdef CONFIG_INET
{
@@ -363,7 +295,7 @@
.strategy = &sysctl_lasat_intvec
},
{
- .ctl_name = LASAT_NETMASK,
+ .ctl_name = CTL_UNNUMBERED,
.procname = "netmask",
.data = &lasat_board_info.li_eeprom_info.netmask,
.maxlen = sizeof(int),
@@ -371,15 +303,6 @@
.proc_handler = &proc_lasat_ip,
.strategy = &sysctl_lasat_intvec
},
- {
- .ctl_name = CTL_UNNUMBERED,
- .procname = "bcastaddr",
- .data = &lasat_bcastaddr,
- .maxlen = sizeof(lasat_bcastaddr),
- .mode = 0600,
- .proc_handler = &proc_dostring,
- .strategy = &sysctl_string
- },
#endif
{
.ctl_name = CTL_UNNUMBERED,
@@ -417,7 +340,7 @@
.data = &lasat_board_info.li_namestr,
.maxlen = sizeof(lasat_board_info.li_namestr),
.mode = 0444,
- .proc_handler = &proc_dostring,
+ .proc_handler = &proc_dostring,
.strategy = &sysctl_string
},
{
@@ -448,9 +371,12 @@
lasat_table_header =
register_sysctl_table(lasat_root_table);
+ if (!lasat_table_header) {
+ printk(KERN_ERR "Unable to register LASAT sysctl\n");
+ return -ENOMEM;
+ }
return 0;
}
__initcall(lasat_register_sysctl);
-#endif /* CONFIG_SYSCTL */
diff --git a/arch/mips/lasat/sysctl.h b/arch/mips/lasat/sysctl.h
deleted file mode 100644
index 341b979..0000000
--- a/arch/mips/lasat/sysctl.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * LASAT sysctl values
- */
-
-#ifndef _LASAT_SYSCTL_H
-#define _LASAT_SYSCTL_H
-
-/* /proc/sys/lasat */
-enum {
- LASAT_CPU_HZ = 1,
- LASAT_BUS_HZ,
- LASAT_MODEL,
- LASAT_PRID,
- LASAT_IPADDR,
- LASAT_NETMASK,
- LASAT_BCAST,
- LASAT_PASSWORD,
- LASAT_SBOOT,
- LASAT_RTC,
- LASAT_NAMESTR,
- LASAT_TYPESTR,
-};
-
-#endif /* _LASAT_SYSCTL_H */
diff --git a/arch/mips/mips-boards/generic/amon.c b/arch/mips/mips-boards/generic/amon.c
index b7633fd..96236bf 100644
--- a/arch/mips/mips-boards/generic/amon.c
+++ b/arch/mips/mips-boards/generic/amon.c
@@ -28,7 +28,7 @@
int amon_cpu_avail(int cpu)
{
- struct cpulaunch *launch = (struct cpulaunch *)KSEG0ADDR(CPULAUNCH);
+ struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
if (cpu < 0 || cpu >= NCPULAUNCH) {
pr_debug("avail: cpu%d is out of range\n", cpu);
@@ -53,7 +53,7 @@
unsigned long gp, unsigned long a0)
{
volatile struct cpulaunch *launch =
- (struct cpulaunch *)KSEG0ADDR(CPULAUNCH);
+ (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
if (!amon_cpu_avail(cpu))
return;
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 008fd82..fe2cac1 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -58,27 +58,8 @@
static int mips_cpu_perf_irq;
extern int cp0_perfcount_irq;
-DEFINE_PER_CPU(unsigned int, tickcount);
-#define tickcount_this_cpu __get_cpu_var(tickcount)
-static unsigned long ledbitmask;
-
static void mips_timer_dispatch(void)
{
-#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS)
- /*
- * Yes, this is very tacky, won't work as expected with SMTC and
- * dyntick will break it,
- * but it gives me a nice warm feeling during debug
- */
-#define LEDBAR 0xbf000408
- if (tickcount_this_cpu++ >= HZ) {
- tickcount_this_cpu = 0;
- change_bit(smp_processor_id(), &ledbitmask);
- smp_wmb(); /* Make sure every one else sees the change */
- /* This will pick up any recent changes made by other CPU's */
- *(unsigned int *)LEDBAR = ledbitmask;
- }
-#endif
do_IRQ(mips_cpu_timer_irq);
}
diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile
index 8dc6e2a..db4ad65 100644
--- a/arch/mips/mips-boards/malta/Makefile
+++ b/arch/mips/mips-boards/malta/Makefile
@@ -19,9 +19,8 @@
# under Linux.
#
-obj-y := malta_int.o malta_platform.o malta_setup.o
+obj-y := malta_int.o malta_mtd.o malta_platform.o malta_setup.o
-obj-$(CONFIG_MTD) += malta_mtd.o
# FIXME FIXME FIXME
obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index 76935e3..27a5b46 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -26,7 +26,7 @@
static unsigned long icache_size, dcache_size; /* Size in bytes */
static unsigned long icache_lsize, dcache_lsize; /* Size in bytes */
-unsigned long __init r3k_cache_size(unsigned long ca_flags)
+unsigned long __cpuinit r3k_cache_size(unsigned long ca_flags)
{
unsigned long flags, status, dummy, size;
volatile unsigned long *p;
@@ -61,7 +61,7 @@
return size * sizeof(*p);
}
-unsigned long __init r3k_cache_lsize(unsigned long ca_flags)
+unsigned long __cpuinit r3k_cache_lsize(unsigned long ca_flags)
{
unsigned long flags, status, lsize, i;
volatile unsigned long *p;
@@ -90,7 +90,7 @@
return lsize * sizeof(*p);
}
-static void __init r3k_probe_cache(void)
+static void __cpuinit r3k_probe_cache(void)
{
dcache_size = r3k_cache_size(ST0_ISC);
if (dcache_size)
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 643c8bc..2709675 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -446,6 +446,7 @@
struct page *page = pfn_to_page(fcp_args->pfn);
int exec = vma->vm_flags & VM_EXEC;
struct mm_struct *mm = vma->vm_mm;
+ int map_coherent = 0;
pgd_t *pgdp;
pud_t *pudp;
pmd_t *pmdp;
@@ -479,7 +480,9 @@
* Use kmap_coherent or kmap_atomic to do flushes for
* another ASID than the current one.
*/
- if (cpu_has_dc_aliases)
+ map_coherent = (cpu_has_dc_aliases &&
+ page_mapped(page) && !Page_dcache_dirty(page));
+ if (map_coherent)
vaddr = kmap_coherent(page, addr);
else
vaddr = kmap_atomic(page, KM_USER0);
@@ -502,7 +505,7 @@
}
if (vaddr) {
- if (cpu_has_dc_aliases)
+ if (map_coherent)
kunmap_coherent();
else
kunmap_atomic(vaddr, KM_USER0);
@@ -1226,6 +1229,28 @@
}
}
+/* CP0 hazard avoidance. */
+#define NXP_BARRIER() \
+ __asm__ __volatile__( \
+ ".set noreorder\n\t" \
+ "nop; nop; nop; nop; nop; nop;\n\t" \
+ ".set reorder\n\t")
+
+static void nxp_pr4450_fixup_config(void)
+{
+ unsigned long config0;
+
+ config0 = read_c0_config();
+
+ /* clear all three cache coherency fields */
+ config0 &= ~(0x7 | (7 << 25) | (7 << 28));
+ config0 |= (((_page_cachable_default >> _CACHE_SHIFT) << 0) |
+ ((_page_cachable_default >> _CACHE_SHIFT) << 25) |
+ ((_page_cachable_default >> _CACHE_SHIFT) << 28));
+ write_c0_config(config0);
+ NXP_BARRIER();
+}
+
static int __cpuinitdata cca = -1;
static int __init cca_setup(char *str)
@@ -1271,6 +1296,10 @@
case CPU_AU1500: /* rev. AB */
au1x00_fixup_config_od();
break;
+
+ case PRID_IMP_PR4450:
+ nxp_pr4450_fixup_config();
+ break;
}
}
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index ecd562d..137c14b 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -71,6 +71,7 @@
* don't have to care about aliases on other CPUs.
*/
unsigned long empty_zero_page, zero_page_mask;
+EXPORT_SYMBOL_GPL(empty_zero_page);
/*
* Not static inline because used by IP27 special magic initialization code
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index d827d61..1417c64 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -235,13 +235,12 @@
}
/*
* Too much unrolling will overflow the available space in
- * clear_space_array / copy_page_array. 8 words sounds generous,
- * but a R4000 with 128 byte L2 line length can exceed even that.
+ * clear_space_array / copy_page_array.
*/
- half_clear_loop_size = min(8 * clear_word_size,
+ half_clear_loop_size = min(16 * clear_word_size,
max(cache_line_size >> 1,
4 * clear_word_size));
- half_copy_loop_size = min(8 * copy_word_size,
+ half_copy_loop_size = min(16 * copy_word_size,
max(cache_line_size >> 1,
4 * copy_word_size));
}
@@ -263,21 +262,23 @@
if (pref_bias_clear_store) {
uasm_i_pref(buf, pref_dst_mode, pref_bias_clear_store + off,
A0);
- } else if (cpu_has_cache_cdex_s) {
- uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0);
- } else if (cpu_has_cache_cdex_p) {
- if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
- uasm_i_nop(buf);
- uasm_i_nop(buf);
- uasm_i_nop(buf);
- uasm_i_nop(buf);
+ } else if (cache_line_size == (half_clear_loop_size << 1)) {
+ if (cpu_has_cache_cdex_s) {
+ uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0);
+ } else if (cpu_has_cache_cdex_p) {
+ if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
+ uasm_i_nop(buf);
+ uasm_i_nop(buf);
+ uasm_i_nop(buf);
+ uasm_i_nop(buf);
+ }
+
+ if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+ uasm_i_lw(buf, ZERO, ZERO, AT);
+
+ uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
}
-
- if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
- uasm_i_lw(buf, ZERO, ZERO, AT);
-
- uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
- }
+ }
}
void __cpuinit build_clear_page(void)
@@ -310,8 +311,8 @@
if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
uasm_i_lui(&buf, AT, 0xa000);
- off = min(8, pref_bias_clear_store / cache_line_size) *
- cache_line_size;
+ off = cache_line_size ? min(8, pref_bias_clear_store / cache_line_size)
+ * cache_line_size : 0;
while (off) {
build_clear_pref(&buf, -off);
off -= cache_line_size;
@@ -403,20 +404,22 @@
if (pref_bias_copy_store) {
uasm_i_pref(buf, pref_dst_mode, pref_bias_copy_store + off,
A0);
- } else if (cpu_has_cache_cdex_s) {
- uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0);
- } else if (cpu_has_cache_cdex_p) {
- if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
- uasm_i_nop(buf);
- uasm_i_nop(buf);
- uasm_i_nop(buf);
- uasm_i_nop(buf);
+ } else if (cache_line_size == (half_copy_loop_size << 1)) {
+ if (cpu_has_cache_cdex_s) {
+ uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0);
+ } else if (cpu_has_cache_cdex_p) {
+ if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
+ uasm_i_nop(buf);
+ uasm_i_nop(buf);
+ uasm_i_nop(buf);
+ uasm_i_nop(buf);
+ }
+
+ if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+ uasm_i_lw(buf, ZERO, ZERO, AT);
+
+ uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
}
-
- if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
- uasm_i_lw(buf, ZERO, ZERO, AT);
-
- uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
}
}
@@ -454,12 +457,14 @@
if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
uasm_i_lui(&buf, AT, 0xa000);
- off = min(8, pref_bias_copy_load / cache_line_size) * cache_line_size;
+ off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
+ cache_line_size : 0;
while (off) {
build_copy_load_pref(&buf, -off);
off -= cache_line_size;
}
- off = min(8, pref_bias_copy_store / cache_line_size) * cache_line_size;
+ off = cache_line_size ? min(8, pref_bias_copy_store / cache_line_size) *
+ cache_line_size : 0;
while (off) {
build_copy_store_pref(&buf, -off);
off -= cache_line_size;
diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c
index fc227f3..e3abfb2 100644
--- a/arch/mips/mm/sc-rm7k.c
+++ b/arch/mips/mm/sc-rm7k.c
@@ -86,7 +86,7 @@
/*
* This function is executed in uncached address space.
*/
-static __init void __rm7k_sc_enable(void)
+static __cpuinit void __rm7k_sc_enable(void)
{
int i;
@@ -107,7 +107,7 @@
}
}
-static __init void rm7k_sc_enable(void)
+static __cpuinit void rm7k_sc_enable(void)
{
if (read_c0_config() & RM7K_CONF_SE)
return;
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 382738c..76da73a 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -224,8 +224,9 @@
static void __cpuinit __maybe_unused build_tlb_probe_entry(u32 **p)
{
switch (current_cpu_type()) {
- /* Found by experiment: R4600 v2.0 needs this, too. */
+ /* Found by experiment: R4600 v2.0/R4700 needs this, too. */
case CPU_R4600:
+ case CPU_R4700:
case CPU_R5000:
case CPU_R5000A:
case CPU_NEVADA:
diff --git a/arch/mips/nxp/pnx8550/jbs/board_setup.c b/arch/mips/nxp/pnx8550/jbs/board_setup.c
index f92826e..57dd903 100644
--- a/arch/mips/nxp/pnx8550/jbs/board_setup.c
+++ b/arch/mips/nxp/pnx8550/jbs/board_setup.c
@@ -47,16 +47,7 @@
void __init board_setup(void)
{
- unsigned long config0, configpr;
-
- config0 = read_c0_config();
-
- /* clear all three cache coherency fields */
- config0 &= ~(0x7 | (7<<25) | (7<<28));
- config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) |
- (CONF_CM_DEFAULT<<28));
- write_c0_config(config0);
- BARRIER;
+ unsigned long configpr;
configpr = read_c0_config7();
configpr |= (1<<19); /* enable tlb */
diff --git a/arch/mips/nxp/pnx8550/stb810/board_setup.c b/arch/mips/nxp/pnx8550/stb810/board_setup.c
index 1282c27..af2a55e 100644
--- a/arch/mips/nxp/pnx8550/stb810/board_setup.c
+++ b/arch/mips/nxp/pnx8550/stb810/board_setup.c
@@ -33,15 +33,7 @@
void __init board_setup(void)
{
- unsigned long config0, configpr;
-
- config0 = read_c0_config();
-
- /* clear all three cache coherency fields */
- config0 &= ~(0x7 | (7<<25) | (7<<28));
- config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) |
- (CONF_CM_DEFAULT<<28));
- write_c0_config(config0);
+ unsigned long configpr;
configpr = read_c0_config7();
configpr |= (1<<19); /* enable tlb */
diff --git a/arch/mips/pci/ops-bridge.c b/arch/mips/pci/ops-bridge.c
index 1fa0992..b46b3e2 100644
--- a/arch/mips/pci/ops-bridge.c
+++ b/arch/mips/pci/ops-bridge.c
@@ -14,6 +14,22 @@
#include <asm/sn/sn0/hub.h>
/*
+ * Most of the IOC3 PCI config register aren't present
+ * we emulate what is needed for a normal PCI enumeration
+ */
+static u32 emulate_ioc3_cfg(int where, int size)
+{
+ if (size == 1 && where == 0x3d)
+ return 0x01;
+ else if (size == 2 && where == 0x3c)
+ return 0x0100;
+ else if (size == 4 && where == 0x3c)
+ return 0x00000100;
+
+ return 0;
+}
+
+/*
* The Bridge ASIC supports both type 0 and type 1 access. Type 1 is
* not really documented, so right now I can't write code which uses it.
* Therefore we use type 0 accesses for now even though they won't work
@@ -64,7 +80,7 @@
* generic PCI code a chance to look at the wrong register.
*/
if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
- *value = 0;
+ *value = emulate_ioc3_cfg(where, size);
return PCIBIOS_SUCCESSFUL;
}
@@ -127,7 +143,7 @@
* generic PCI code a chance to look at the wrong register.
*/
if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
- *value = 0;
+ *value = emulate_ioc3_cfg(where, size);
return PCIBIOS_SUCCESSFUL;
}
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index bb64828..a185169 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -47,6 +47,9 @@
static int num_bridges = 0;
bridge_t *bridge;
int slot;
+ extern int pci_probe_only;
+
+ pci_probe_only = 1;
printk("a bridge\n");
@@ -100,6 +103,11 @@
*/
bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP |
BRIDGE_CTRL_MEM_SWAP;
+#ifdef CONFIG_PAGE_SIZE_4KB
+ bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE;
+#else /* 16kB or larger */
+ bridge->b_wid_control |= BRIDGE_CTRL_PAGE_SIZE;
+#endif
/*
* Hmm... IRIX sets additional bits in the address which
diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c
index 42e4d2c..2a09ad9 100644
--- a/arch/mips/pci/pci-sb1250.c
+++ b/arch/mips/pci/pci-sb1250.c
@@ -207,6 +207,7 @@
static int __init sb1250_pcibios_init(void)
{
+ void __iomem *io_map_base;
uint32_t cmdreg;
uint64_t reg;
extern int pci_probe_only;
@@ -253,12 +254,13 @@
* works correctly with most of Linux's drivers.
* XXX ehs: Should this happen in PCI Device mode?
*/
-
- set_io_port_base((unsigned long)
- ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 65536));
isa_slot_offset = (unsigned long)
ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES_32, 1024 * 1024);
+ io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024);
+ sb1250_controller.io_map_base = io_map_base;
+ set_io_port_base((unsigned long)io_map_base);
+
#ifdef CONFIG_SIBYTE_HAS_LDT
/*
* Also check the LDT bridge's enable, just in case we didn't
diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c
index 33c4f68..d1e049b 100644
--- a/arch/mips/pci/pci-vr41xx.c
+++ b/arch/mips/pci/pci-vr41xx.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2001-2003 MontaVista Software Inc.
* Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2004-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or modify
@@ -300,6 +300,18 @@
ioport_resource.end = IO_PORT_RESOURCE_END;
}
+ if (setup->master_io) {
+ void __iomem *io_map_base;
+ struct resource *res = vr41xx_pci_controller.io_resource;
+ master = setup->master_io;
+ io_map_base = ioremap(master->bus_base_address,
+ res->end - res->start + 1);
+ if (!io_map_base)
+ return -EBUSY;
+
+ vr41xx_pci_controller.io_map_base = (unsigned long)io_map_base;
+ }
+
register_pci_controller(&vr41xx_pci_controller);
return 0;
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 7093e7c..4a500e8 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -161,27 +161,6 @@
return NASID_TO_COMPACT_NODEID(get_nasid());
}
-/* Extracted from the IOC3 meta driver. FIXME. */
-static inline void ioc3_sio_init(void)
-{
- struct ioc3 *ioc3;
- nasid_t nid;
- long loops;
-
- nid = get_nasid();
- ioc3 = (struct ioc3 *) KL_CONFIG_CH_CONS_INFO(nid)->memory_base;
-
- ioc3->sscr_a = 0; /* PIO mode for uarta. */
- ioc3->sscr_b = 0; /* PIO mode for uartb. */
- ioc3->sio_iec = ~0;
- ioc3->sio_ies = (SIO_IR_SA_INT | SIO_IR_SB_INT);
-
- loops=1000000; while(loops--);
- ioc3->sregs.uarta.iu_fcr = 0;
- ioc3->sregs.uartb.iu_fcr = 0;
- loops=1000000; while(loops--);
-}
-
static inline void ioc3_eth_init(void)
{
struct ioc3 *ioc3;
@@ -234,7 +213,6 @@
panic("Kernel compiled for N mode.");
#endif
- ioc3_sio_init();
ioc3_eth_init();
per_cpu_init();
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index bf438d0..42cd109 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -33,10 +33,6 @@
#define SLOT_PFNSHIFT (SLOT_SHIFT - PAGE_SHIFT)
#define PFN_NASIDSHFT (NASID_SHFT - PAGE_SHIFT)
-#define SLOT_IGNORED 0xffff
-
-static short __initdata slot_lastfilled_cache[MAX_COMPACT_NODES];
-static unsigned short __initdata slot_psize_cache[MAX_COMPACT_NODES][MAX_MEM_SLOTS];
static struct bootmem_data __initdata plat_node_bdata[MAX_COMPACT_NODES];
struct node_data *__node_data[MAX_COMPACT_NODES];
@@ -267,51 +263,6 @@
return ((pfn_t)nasid << PFN_NASIDSHFT) | (slot << SLOT_PFNSHIFT);
}
-/*
- * Return the number of pages of memory provided by the given slot
- * on the specified node.
- */
-static pfn_t __init slot_getsize(cnodeid_t node, int slot)
-{
- return (pfn_t) slot_psize_cache[node][slot];
-}
-
-/*
- * Return highest slot filled
- */
-static int __init node_getlastslot(cnodeid_t node)
-{
- return (int) slot_lastfilled_cache[node];
-}
-
-/*
- * Return the pfn of the last free page of memory on a node.
- */
-static pfn_t __init node_getmaxclick(cnodeid_t node)
-{
- pfn_t slot_psize;
- int slot;
-
- /*
- * Start at the top slot. When we find a slot with memory in it,
- * that's the winner.
- */
- for (slot = (MAX_MEM_SLOTS - 1); slot >= 0; slot--) {
- if ((slot_psize = slot_getsize(node, slot))) {
- if (slot_psize == SLOT_IGNORED)
- continue;
- /* Return the basepfn + the slot size, minus 1. */
- return slot_getbasepfn(node, slot) + slot_psize - 1;
- }
- }
-
- /*
- * If there's no memory on the node, return 0. This is likely
- * to cause problems.
- */
- return 0;
-}
-
static pfn_t __init slot_psize_compute(cnodeid_t node, int slot)
{
nasid_t nasid;
@@ -404,13 +355,13 @@
static void __init szmem(void)
{
pfn_t slot_psize, slot0sz = 0, nodebytes; /* Hack to detect problem configs */
- int slot, ignore;
+ int slot;
cnodeid_t node;
num_physpages = 0;
for_each_online_node(node) {
- ignore = nodebytes = 0;
+ nodebytes = 0;
for (slot = 0; slot < MAX_MEM_SLOTS; slot++) {
slot_psize = slot_psize_compute(node, slot);
if (slot == 0)
@@ -420,21 +371,20 @@
* kernel text.
*/
nodebytes += (1LL << SLOT_SHIFT);
+
+ if (!slot_psize)
+ continue;
+
if ((nodebytes >> PAGE_SHIFT) * (sizeof(struct page)) >
- (slot0sz << PAGE_SHIFT))
- ignore = 1;
- if (ignore && slot_psize) {
+ (slot0sz << PAGE_SHIFT)) {
printk("Ignoring slot %d onwards on node %d\n",
slot, node);
- slot_psize_cache[node][slot] = SLOT_IGNORED;
slot = MAX_MEM_SLOTS;
continue;
}
num_physpages += slot_psize;
- slot_psize_cache[node][slot] =
- (unsigned short) slot_psize;
- if (slot_psize)
- slot_lastfilled_cache[node] = slot;
+ add_active_range(node, slot_getbasepfn(node, slot),
+ slot_getbasepfn(node, slot) + slot_psize);
}
}
}
@@ -442,18 +392,20 @@
static void __init node_mem_init(cnodeid_t node)
{
pfn_t slot_firstpfn = slot_getbasepfn(node, 0);
- pfn_t slot_lastpfn = slot_firstpfn + slot_getsize(node, 0);
pfn_t slot_freepfn = node_getfirstfree(node);
- struct pglist_data *pd;
unsigned long bootmap_size;
+ pfn_t start_pfn, end_pfn;
+
+ get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
/*
* Allocate the node data structures on the node first.
*/
__node_data[node] = __va(slot_freepfn << PAGE_SHIFT);
- pd = NODE_DATA(node);
- pd->bdata = &plat_node_bdata[node];
+ NODE_DATA(node)->bdata = &plat_node_bdata[node];
+ NODE_DATA(node)->node_start_pfn = start_pfn;
+ NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
cpus_clear(hub_data(node)->h_cpus);
@@ -461,12 +413,12 @@
sizeof(struct hub_data));
bootmap_size = init_bootmem_node(NODE_DATA(node), slot_freepfn,
- slot_firstpfn, slot_lastpfn);
- free_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT,
- (slot_lastpfn - slot_firstpfn) << PAGE_SHIFT);
+ start_pfn, end_pfn);
+ free_bootmem_with_active_regions(node, end_pfn);
reserve_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT,
((slot_freepfn - slot_firstpfn) << PAGE_SHIFT) + bootmap_size,
BOOTMEM_DEFAULT);
+ sparse_memory_present_with_active_regions(node);
}
/*
@@ -515,16 +467,15 @@
pagetable_init();
for_each_online_node(node) {
- pfn_t start_pfn = slot_getbasepfn(node, 0);
- pfn_t end_pfn = node_getmaxclick(node) + 1;
+ pfn_t start_pfn, end_pfn;
- zones_size[ZONE_NORMAL] = end_pfn - start_pfn;
- free_area_init_node(node, NODE_DATA(node),
- zones_size, start_pfn, NULL);
+ get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
if (end_pfn > max_low_pfn)
max_low_pfn = end_pfn;
}
+ zones_size[ZONE_NORMAL] = max_low_pfn;
+ free_area_init_nodes(zones_size);
}
void __init mem_init(void)
@@ -535,34 +486,10 @@
high_memory = (void *) __va(num_physpages << PAGE_SHIFT);
for_each_online_node(node) {
- unsigned slot, numslots;
- struct page *end, *p;
-
/*
* This will free up the bootmem, ie, slot 0 memory.
*/
totalram_pages += free_all_bootmem_node(NODE_DATA(node));
-
- /*
- * We need to manually do the other slots.
- */
- numslots = node_getlastslot(node);
- for (slot = 1; slot <= numslots; slot++) {
- p = nid_page_nr(node, slot_getbasepfn(node, slot) -
- slot_getbasepfn(node, 0));
-
- /*
- * Free valid memory in current slot.
- */
- for (end = p + slot_getsize(node, slot); p < end; p++) {
- /* if (!page_is_ram(pgnr)) continue; */
- /* commented out until page_is_ram works */
- ClearPageReserved(p);
- init_page_count(p);
- __free_page(p);
- totalram_pages++;
- }
- }
}
totalram_pages -= setup_zero_pages(); /* This comes from node 0 */
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index f15fc93..ba5cdeb 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -176,11 +176,14 @@
static void __cpuinit ip27_init_secondary(void)
{
per_cpu_init();
- local_irq_enable();
}
static void __cpuinit ip27_smp_finish(void)
{
+ extern void hub_rt_clock_event_init(void);
+
+ hub_rt_clock_event_init();
+ local_irq_enable();
}
static void __init ip27_cpus_done(void)
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 9cebc9e..8b4e854 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -160,10 +160,13 @@
int rt_timer_irq;
+static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent);
+static DEFINE_PER_CPU(char [11], hub_rt_name);
+
static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id)
{
- struct clock_event_device *cd = dev_id;
unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu);
int slice = cputoslice(cpu);
/*
@@ -192,10 +195,7 @@
#define NSEC_PER_CYCLE 800
#define CYCLES_PER_SEC (NSEC_PER_SEC / NSEC_PER_CYCLE)
-static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent);
-static DEFINE_PER_CPU(char [11], hub_rt_name);
-
-static void __cpuinit hub_rt_clock_event_init(void)
+void __cpuinit hub_rt_clock_event_init(void)
{
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu);
@@ -203,17 +203,16 @@
int irq = rt_timer_irq;
sprintf(name, "hub-rt %d", cpu);
- cd->name = "HUB-RT",
- cd->features = CLOCK_EVT_FEAT_ONESHOT,
+ cd->name = name;
+ cd->features = CLOCK_EVT_FEAT_ONESHOT;
clockevent_set_clock(cd, CYCLES_PER_SEC);
cd->max_delta_ns = clockevent_delta2ns(0xfffffffffffff, cd);
cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
- cd->rating = 200,
- cd->irq = irq,
- cd->cpumask = cpumask_of_cpu(cpu),
- cd->rating = 300,
- cd->set_next_event = rt_next_event,
- cd->set_mode = rt_set_mode,
+ cd->rating = 200;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of_cpu(cpu);
+ cd->set_next_event = rt_next_event;
+ cd->set_mode = rt_set_mode;
clockevents_register_device(cd);
}
@@ -261,6 +260,7 @@
{
hub_rt_clocksource_init();
hub_rt_clock_event_global_init();
+ hub_rt_clock_event_init();
}
void __cpuinit cpu_time_init(void)
@@ -281,7 +281,6 @@
printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed);
- hub_rt_clock_event_init();
set_c0_status(SRB_TIMOCLK);
}
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index b0ea0e4..0d6b666 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -425,6 +425,11 @@
BUILD_BUG_ON(MACEISA_SERIAL2_RDMAOR_IRQ - MACEISA_AUDIO_SW_IRQ != 31);
crime_int = crime->istat & crime_mask;
+
+ /* crime sometime delivers spurious interrupts, ignore them */
+ if (unlikely(crime_int == 0))
+ return;
+
irq = MACE_VID_IN1_IRQ + __ffs(crime_int);
if (crime_int & CRIME_MACEISA_INT_MASK) {
diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
index 2d62603..1775755 100644
--- a/arch/mips/sibyte/swarm/Makefile
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -1,3 +1,3 @@
-lib-y = setup.o rtc_xicor1241.o rtc_m41t81.o
+obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o
-lib-$(CONFIG_KGDB) += dbg_io.o
+obj-$(CONFIG_KGDB) += dbg_io.o
diff --git a/arch/mn10300/kernel/mn10300_ksyms.c b/arch/mn10300/kernel/mn10300_ksyms.c
index 6d19628..f9eb975 100644
--- a/arch/mn10300/kernel/mn10300_ksyms.c
+++ b/arch/mn10300/kernel/mn10300_ksyms.c
@@ -10,8 +10,11 @@
*/
#include <linux/module.h>
#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+EXPORT_SYMBOL(empty_zero_page);
+
EXPORT_SYMBOL(change_bit);
EXPORT_SYMBOL(test_and_change_bit);
@@ -31,7 +34,9 @@
extern u64 __ashldi3(u64, unsigned);
extern u64 __lshrdi3(u64, unsigned);
extern s64 __negdi2(s64);
+extern int __ucmpdi2(u64, u64);
EXPORT_SYMBOL(__ashrdi3);
EXPORT_SYMBOL(__ashldi3);
EXPORT_SYMBOL(__lshrdi3);
EXPORT_SYMBOL(__negdi2);
+EXPORT_SYMBOL(__ucmpdi2);
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
index 3b0d579..b28c9a6 100644
--- a/arch/mn10300/kernel/process.c
+++ b/arch/mn10300/kernel/process.c
@@ -20,7 +20,6 @@
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/reboot.h>
@@ -154,6 +153,7 @@
return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0,
NULL, NULL);
}
+EXPORT_SYMBOL(kernel_thread);
/*
* free current thread data structures etc..
diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c
index 6b7ce26..017121c 100644
--- a/arch/mn10300/kernel/setup.c
+++ b/arch/mn10300/kernel/setup.c
@@ -17,7 +17,6 @@
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/delay.h>
diff --git a/arch/mn10300/lib/Makefile b/arch/mn10300/lib/Makefile
index fdfa9ec..0cd2346 100644
--- a/arch/mn10300/lib/Makefile
+++ b/arch/mn10300/lib/Makefile
@@ -4,4 +4,4 @@
lib-y = delay.o usercopy.o checksum.o bitops.o memcpy.o memmove.o memset.o
lib-y += do_csum.o
-lib-y += __ashldi3.o __ashrdi3.o __lshrdi3.o negdi2.o
+lib-y += __ashldi3.o __ashrdi3.o __lshrdi3.o negdi2.o __ucmpdi2.o
diff --git a/arch/mn10300/lib/__ucmpdi2.S b/arch/mn10300/lib/__ucmpdi2.S
new file mode 100644
index 0000000..60dcbdf
--- /dev/null
+++ b/arch/mn10300/lib/__ucmpdi2.S
@@ -0,0 +1,43 @@
+/* __ucmpdi2.S: 64-bit unsigned compare
+ *
+ * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+ .text
+ .p2align 4
+
+###############################################################################
+#
+# int __ucmpdi2(unsigned long long a [D0:D1],
+# unsigned long long b [(SP,12),(SP,16)])
+#
+# - returns 0, 1, or 2 as a <, =, > b respectively.
+#
+###############################################################################
+ .globl __ucmpdi2
+ .type __ucmpdi2,@function
+__ucmpdi2:
+ mov (12,sp),a0 # b.lsw
+ mov (16,sp),a1 # b.msw
+
+ sub a0,d0
+ subc a1,d1 # may clear Z, never sets it
+ bne __ucmpdi2_differ # a.msw != b.msw
+ mov +1,d0
+ rets
+
+__ucmpdi2_differ:
+ # C flag is set if LE, clear if GE
+ subc d0,d0 # -1 if LE, 0 if GE
+ add +1,d0 # 0 if LE, 1 if GE
+ add d0,d0 # 0 if LE, 2 if GE
+ rets
+
+ .size __ucmpdi2, .-__ucmpdi2
diff --git a/arch/parisc/hpux/gate.S b/arch/parisc/hpux/gate.S
index f0b18ce..38a1c1b 100644
--- a/arch/parisc/hpux/gate.S
+++ b/arch/parisc/hpux/gate.S
@@ -13,10 +13,9 @@
#include <asm/unistd.h>
#include <asm/errno.h>
#include <linux/linkage.h>
-#include <linux/init.h>
.level LEVEL
- __HEAD
+ .text
.import hpux_call_table
.import hpux_syscall_exit,code
diff --git a/arch/parisc/hpux/wrappers.S b/arch/parisc/hpux/wrappers.S
index ccd3a50..58c53c8 100644
--- a/arch/parisc/hpux/wrappers.S
+++ b/arch/parisc/hpux/wrappers.S
@@ -28,10 +28,9 @@
#include <asm/assembly.h>
#include <asm/signal.h>
#include <linux/linkage.h>
-#include <linux/init.h>
.level LEVEL
- __HEAD
+ .text
/* These should probably go in a header file somewhere.
* They are duplicated in kernel/wrappers.S
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 5d08374..d1fa4ed 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -38,7 +38,6 @@
#include <asm/thread_info.h>
#include <linux/linkage.h>
-#include <linux/init.h>
#ifdef CONFIG_64BIT
.level 2.0w
@@ -622,7 +621,7 @@
* the static part of the kernel address space.
*/
- __HEAD
+ .text
.align PAGE_SIZE
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index 5680a2c..a84e31e 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -33,6 +33,7 @@
END(boot_args)
__HEAD
+
.align 4
.import init_thread_union,data
.import fault_vector_20,code /* IVA parisc 2.0 32 bit */
diff --git a/arch/parisc/kernel/hpmc.S b/arch/parisc/kernel/hpmc.S
index 068322e..2cbf13b 100644
--- a/arch/parisc/kernel/hpmc.S
+++ b/arch/parisc/kernel/hpmc.S
@@ -47,7 +47,6 @@
#include <asm/pdc.h>
#include <linux/linkage.h>
-#include <linux/init.h>
/*
* stack for os_hpmc, the HPMC handler.
@@ -77,7 +76,7 @@
.block HPMC_PIM_DATA_SIZE
END(hpmc_pim_data)
- __HEAD
+ .text
.import intr_save, code
ENTRY(os_hpmc)
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index e3246a5..09b77b2 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -37,9 +37,8 @@
#include <asm/pgtable.h>
#include <asm/cache.h>
#include <linux/linkage.h>
-#include <linux/init.h>
- __HEAD
+ .text
.align 128
ENTRY(flush_tlb_all_local)
diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c
index 5b7fc4a..0eecfbbc 100644
--- a/arch/parisc/kernel/parisc_ksyms.c
+++ b/arch/parisc/kernel/parisc_ksyms.c
@@ -152,3 +152,6 @@
EXPORT_SYMBOL(node_data);
EXPORT_SYMBOL(pfnnid_map);
#endif
+
+/* from pacache.S -- needed for copy_page */
+EXPORT_SYMBOL(copy_user_page_asm);
diff --git a/arch/parisc/kernel/perf_asm.S b/arch/parisc/kernel/perf_asm.S
index d411dfb..fa6ea99 100644
--- a/arch/parisc/kernel/perf_asm.S
+++ b/arch/parisc/kernel/perf_asm.S
@@ -43,7 +43,7 @@
; The coprocessor only needs to be enabled when
; starting/stopping the coprocessor with the pmenb/pmdis.
;
- __HEAD
+ .text
ENTRY(perf_intrigue_enable_perf_counters)
.proc
diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S
index 47fbdae..7a92695 100644
--- a/arch/parisc/kernel/real2.S
+++ b/arch/parisc/kernel/real2.S
@@ -12,7 +12,6 @@
#include <asm/assembly.h>
#include <linux/linkage.h>
-#include <linux/init.h>
.section .bss
.export real_stack
@@ -40,7 +39,7 @@
/************************ 32-bit real-mode calls ***********************/
/* This can be called in both narrow and wide kernels */
- __HEAD
+ .text
/* unsigned long real32_call_asm(unsigned int *sp,
* unsigned int *arg0p,
@@ -114,7 +113,7 @@
# define PUSH_CR(r, where) mfctl r, %r1 ! STREG,ma %r1, REG_SZ(where)
# define POP_CR(r, where) LDREG,mb -REG_SZ(where), %r1 ! mtctl %r1, r
- __HEAD
+ .text
save_control_regs:
load32 PA(save_cr_space), %r28
PUSH_CR(%cr24, %r28)
@@ -146,7 +145,7 @@
/* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for
* more general-purpose use by the several places which need RFIs
*/
- __HEAD
+ .text
.align 128
rfi_virt2real:
/* switch to real mode... */
@@ -181,7 +180,7 @@
bv 0(%r2)
nop
- __HEAD
+ .text
.align 128
rfi_real2virt:
rsm PSW_SM_I,%r0
@@ -219,7 +218,7 @@
/************************ 64-bit real-mode calls ***********************/
/* This is only usable in wide kernels right now and will probably stay so */
- __HEAD
+ .text
/* unsigned long real64_call_asm(unsigned long *sp,
* unsigned long *arg0p,
* unsigned long fn)
@@ -277,7 +276,7 @@
#endif
- __HEAD
+ .text
/* http://lists.parisc-linux.org/hypermail/parisc-linux/10916.html
** GCC 3.3 and later has a new function in libgcc.a for
** comparing function pointers.
diff --git a/arch/parisc/kernel/signal32.c b/arch/parisc/kernel/signal32.c
index db94aff..fb59852 100644
--- a/arch/parisc/kernel/signal32.c
+++ b/arch/parisc/kernel/signal32.c
@@ -289,7 +289,7 @@
&sc->sc_iaoq[0], compat_reg);
/* Store upper half */
- compat_reg = (compat_uint_t)(regs->gr[32] >> 32);
+ compat_reg = (compat_uint_t)(regs->gr[31] >> 32);
err |= __put_user(compat_reg, &rf->rf_iaoq[0]);
DBG(2,"setup_sigcontext32: upper half iaoq[0] = %#x\n", compat_reg);
@@ -299,7 +299,7 @@
DBG(2,"setup_sigcontext32: sc->sc_iaoq[1] = %p <= %#x\n",
&sc->sc_iaoq[1], compat_reg);
/* Store upper half */
- compat_reg = (compat_uint_t)((regs->gr[32]+4) >> 32);
+ compat_reg = (compat_uint_t)((regs->gr[31]+4) >> 32);
err |= __put_user(compat_reg, &rf->rf_iaoq[1]);
DBG(2,"setup_sigcontext32: upper half iaoq[1] = %#x\n", compat_reg);
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index ae509d8..69b6eeb 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -17,7 +17,6 @@
#include <asm/processor.h>
#include <linux/linkage.h>
-#include <linux/init.h>
/* We fill the empty parts of the gateway page with
* something that will kill the kernel or a
@@ -27,7 +26,7 @@
.level LEVEL
- __HEAD
+ .text
.import syscall_exit,code
.import syscall_exit_rfi,code
@@ -637,7 +636,7 @@
All light-weight-syscall atomic operations
will use this set of locks
*/
- .section .data, "aw"
+ .section .data
.align PAGE_SIZE
ENTRY(lws_lock_start)
/* lws locks */
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 50b4a3a..2e516b8 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -50,6 +50,7 @@
_text = .; /* Text and read-only data */
.text ALIGN(16) : {
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S
index 4821ad6..d172d42 100644
--- a/arch/parisc/lib/fixup.S
+++ b/arch/parisc/lib/fixup.S
@@ -23,7 +23,6 @@
#include <asm/assembly.h>
#include <asm/errno.h>
#include <linux/linkage.h>
-#include <linux/init.h>
#ifdef CONFIG_SMP
.macro get_fault_ip t1 t2
@@ -56,7 +55,7 @@
.level LEVEL
- __HEAD
+ .text
.section .fixup, "ax"
/* get_user() fixups, store -EFAULT in r8, and 0 in r9 */
diff --git a/arch/parisc/lib/lusercopy.S b/arch/parisc/lib/lusercopy.S
index b0d8853..1bd23cc 100644
--- a/arch/parisc/lib/lusercopy.S
+++ b/arch/parisc/lib/lusercopy.S
@@ -33,12 +33,11 @@
*/
+ .text
+
#include <asm/assembly.h>
#include <asm/errno.h>
#include <linux/linkage.h>
-#include <linux/init.h>
-
- __HEAD
/*
* get_sr gets the appropriate space value into
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 78fe252..ce0da68 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -547,6 +547,7 @@
}
unsigned long *empty_zero_page __read_mostly;
+EXPORT_SYMBOL(empty_zero_page);
void show_mem(void)
{
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 9dcdc03..b7d4c4c 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -96,6 +96,8 @@
else
KBUILD_CFLAGS += $(call cc-option,-mtune=power4)
endif
+else
+LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
endif
ifeq ($(CONFIG_TUNE_CELL),y)
@@ -154,7 +156,7 @@
CPPFLAGS_vmlinux.lds := -Upowerpc
-BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.%
+BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
PHONY += $(BOOT_TARGETS)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index f5e0b2a..095e04d 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -51,7 +51,7 @@
$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
-src-wlib := string.S crt0.S stdio.c main.c \
+src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
$(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
@@ -221,8 +221,8 @@
image-$(CONFIG_YOSEMITE) += cuImage.yosemite
# Board ports in arch/powerpc/platform/8xx/Kconfig
-image-$(CONFIG_PPC_MPC86XADS) += cuImage.mpc866ads
-image-$(CONFIG_PPC_MPC885ADS) += cuImage.mpc885ads
+image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads
+image-$(CONFIG_MPC885ADS) += cuImage.mpc885ads
image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc
image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \
dtbImage.adder875-redboot
@@ -273,7 +273,8 @@
initrd- := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
initrd-y := $(patsubst zImage%, zImage.initrd%, \
$(patsubst dtbImage%, dtbImage.initrd%, \
- $(patsubst treeImage%, treeImage.initrd%, $(image-y))))
+ $(patsubst simpleImage%, simpleImage.initrd%, \
+ $(patsubst treeImage%, treeImage.initrd%, $(image-y)))))
initrd-y := $(filter-out $(image-y), $(initrd-y))
targets += $(image-y) $(initrd-y)
diff --git a/arch/powerpc/boot/crtsavres.S b/arch/powerpc/boot/crtsavres.S
new file mode 100644
index 0000000..f3d9b35
--- /dev/null
+++ b/arch/powerpc/boot/crtsavres.S
@@ -0,0 +1,233 @@
+/*
+ * Special support for eabi and SVR4
+ *
+ * Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ * Written By Michael Meissner
+ *
+ * Based on gcc/config/rs6000/crtsavres.asm from gcc
+ *
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * In addition to the permissions in the GNU General Public License, the
+ * Free Software Foundation gives you unlimited permission to link the
+ * compiled version of this file with other programs, and to distribute
+ * those programs without any restriction coming from the use of this
+ * file. (The General Public License restrictions do apply in other
+ * respects; for example, they cover modification of the file, and
+ * distribution when not linked into another program.)
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ * As a special exception, if you link this library with files
+ * compiled with GCC to produce an executable, this does not cause
+ * the resulting executable to be covered by the GNU General Public License.
+ * This exception does not however invalidate any other reasons why
+ * the executable file might be covered by the GNU General Public License.
+ */
+
+ .file "crtsavres.S"
+ .section ".text"
+
+/* On PowerPC64 Linux, these functions are provided by the linker. */
+#ifndef __powerpc64__
+
+#define _GLOBAL(name) \
+ .type name,@function; \
+ .globl name; \
+name:
+
+/* Routines for saving integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer save area. */
+
+_GLOBAL(_savegpr_14)
+_GLOBAL(_save32gpr_14)
+ stw 14,-72(11) /* save gp registers */
+_GLOBAL(_savegpr_15)
+_GLOBAL(_save32gpr_15)
+ stw 15,-68(11)
+_GLOBAL(_savegpr_16)
+_GLOBAL(_save32gpr_16)
+ stw 16,-64(11)
+_GLOBAL(_savegpr_17)
+_GLOBAL(_save32gpr_17)
+ stw 17,-60(11)
+_GLOBAL(_savegpr_18)
+_GLOBAL(_save32gpr_18)
+ stw 18,-56(11)
+_GLOBAL(_savegpr_19)
+_GLOBAL(_save32gpr_19)
+ stw 19,-52(11)
+_GLOBAL(_savegpr_20)
+_GLOBAL(_save32gpr_20)
+ stw 20,-48(11)
+_GLOBAL(_savegpr_21)
+_GLOBAL(_save32gpr_21)
+ stw 21,-44(11)
+_GLOBAL(_savegpr_22)
+_GLOBAL(_save32gpr_22)
+ stw 22,-40(11)
+_GLOBAL(_savegpr_23)
+_GLOBAL(_save32gpr_23)
+ stw 23,-36(11)
+_GLOBAL(_savegpr_24)
+_GLOBAL(_save32gpr_24)
+ stw 24,-32(11)
+_GLOBAL(_savegpr_25)
+_GLOBAL(_save32gpr_25)
+ stw 25,-28(11)
+_GLOBAL(_savegpr_26)
+_GLOBAL(_save32gpr_26)
+ stw 26,-24(11)
+_GLOBAL(_savegpr_27)
+_GLOBAL(_save32gpr_27)
+ stw 27,-20(11)
+_GLOBAL(_savegpr_28)
+_GLOBAL(_save32gpr_28)
+ stw 28,-16(11)
+_GLOBAL(_savegpr_29)
+_GLOBAL(_save32gpr_29)
+ stw 29,-12(11)
+_GLOBAL(_savegpr_30)
+_GLOBAL(_save32gpr_30)
+ stw 30,-8(11)
+_GLOBAL(_savegpr_31)
+_GLOBAL(_save32gpr_31)
+ stw 31,-4(11)
+ blr
+
+/* Routines for restoring integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area. */
+
+_GLOBAL(_restgpr_14)
+_GLOBAL(_rest32gpr_14)
+ lwz 14,-72(11) /* restore gp registers */
+_GLOBAL(_restgpr_15)
+_GLOBAL(_rest32gpr_15)
+ lwz 15,-68(11)
+_GLOBAL(_restgpr_16)
+_GLOBAL(_rest32gpr_16)
+ lwz 16,-64(11)
+_GLOBAL(_restgpr_17)
+_GLOBAL(_rest32gpr_17)
+ lwz 17,-60(11)
+_GLOBAL(_restgpr_18)
+_GLOBAL(_rest32gpr_18)
+ lwz 18,-56(11)
+_GLOBAL(_restgpr_19)
+_GLOBAL(_rest32gpr_19)
+ lwz 19,-52(11)
+_GLOBAL(_restgpr_20)
+_GLOBAL(_rest32gpr_20)
+ lwz 20,-48(11)
+_GLOBAL(_restgpr_21)
+_GLOBAL(_rest32gpr_21)
+ lwz 21,-44(11)
+_GLOBAL(_restgpr_22)
+_GLOBAL(_rest32gpr_22)
+ lwz 22,-40(11)
+_GLOBAL(_restgpr_23)
+_GLOBAL(_rest32gpr_23)
+ lwz 23,-36(11)
+_GLOBAL(_restgpr_24)
+_GLOBAL(_rest32gpr_24)
+ lwz 24,-32(11)
+_GLOBAL(_restgpr_25)
+_GLOBAL(_rest32gpr_25)
+ lwz 25,-28(11)
+_GLOBAL(_restgpr_26)
+_GLOBAL(_rest32gpr_26)
+ lwz 26,-24(11)
+_GLOBAL(_restgpr_27)
+_GLOBAL(_rest32gpr_27)
+ lwz 27,-20(11)
+_GLOBAL(_restgpr_28)
+_GLOBAL(_rest32gpr_28)
+ lwz 28,-16(11)
+_GLOBAL(_restgpr_29)
+_GLOBAL(_rest32gpr_29)
+ lwz 29,-12(11)
+_GLOBAL(_restgpr_30)
+_GLOBAL(_rest32gpr_30)
+ lwz 30,-8(11)
+_GLOBAL(_restgpr_31)
+_GLOBAL(_rest32gpr_31)
+ lwz 31,-4(11)
+ blr
+
+/* Routines for restoring integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area. */
+
+_GLOBAL(_restgpr_14_x)
+_GLOBAL(_rest32gpr_14_x)
+ lwz 14,-72(11) /* restore gp registers */
+_GLOBAL(_restgpr_15_x)
+_GLOBAL(_rest32gpr_15_x)
+ lwz 15,-68(11)
+_GLOBAL(_restgpr_16_x)
+_GLOBAL(_rest32gpr_16_x)
+ lwz 16,-64(11)
+_GLOBAL(_restgpr_17_x)
+_GLOBAL(_rest32gpr_17_x)
+ lwz 17,-60(11)
+_GLOBAL(_restgpr_18_x)
+_GLOBAL(_rest32gpr_18_x)
+ lwz 18,-56(11)
+_GLOBAL(_restgpr_19_x)
+_GLOBAL(_rest32gpr_19_x)
+ lwz 19,-52(11)
+_GLOBAL(_restgpr_20_x)
+_GLOBAL(_rest32gpr_20_x)
+ lwz 20,-48(11)
+_GLOBAL(_restgpr_21_x)
+_GLOBAL(_rest32gpr_21_x)
+ lwz 21,-44(11)
+_GLOBAL(_restgpr_22_x)
+_GLOBAL(_rest32gpr_22_x)
+ lwz 22,-40(11)
+_GLOBAL(_restgpr_23_x)
+_GLOBAL(_rest32gpr_23_x)
+ lwz 23,-36(11)
+_GLOBAL(_restgpr_24_x)
+_GLOBAL(_rest32gpr_24_x)
+ lwz 24,-32(11)
+_GLOBAL(_restgpr_25_x)
+_GLOBAL(_rest32gpr_25_x)
+ lwz 25,-28(11)
+_GLOBAL(_restgpr_26_x)
+_GLOBAL(_rest32gpr_26_x)
+ lwz 26,-24(11)
+_GLOBAL(_restgpr_27_x)
+_GLOBAL(_rest32gpr_27_x)
+ lwz 27,-20(11)
+_GLOBAL(_restgpr_28_x)
+_GLOBAL(_rest32gpr_28_x)
+ lwz 28,-16(11)
+_GLOBAL(_restgpr_29_x)
+_GLOBAL(_rest32gpr_29_x)
+ lwz 29,-12(11)
+_GLOBAL(_restgpr_30_x)
+_GLOBAL(_rest32gpr_30_x)
+ lwz 30,-8(11)
+_GLOBAL(_restgpr_31_x)
+_GLOBAL(_rest32gpr_31_x)
+ lwz 0,4(11)
+ lwz 31,-4(11)
+ mtlr 0
+ mr 1,11
+ blr
+#endif
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 5bc09ad..f3083c7 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -164,12 +164,6 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
};
enet0: ethernet@24000 {
@@ -195,7 +189,7 @@
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
- phy-handle = <&phy3>;
+ fixed-link = <1 1 1000 0 0>;
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 711f9a3..0e872a6 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -164,12 +164,6 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
};
enet0: ethernet@24000 {
@@ -195,7 +189,7 @@
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
- phy-handle = <&phy3>;
+ fixed-link = <1 1 1000 0 0>;
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index c11ceb7..1eb8def 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -164,12 +164,6 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
};
enet0: ethernet@24000 {
@@ -195,7 +189,7 @@
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
- phy-handle = <&phy3>;
+ fixed-link = <1 1 1000 0 0>;
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index fa298a8..4811b81 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -409,7 +409,7 @@
interrupts = <26 2>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>;
+ 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
clock-frequency = <33333333>;
#interrupt-cells = <1>;
#size-cells = <2>;
@@ -428,7 +428,7 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
- 0x0 0x8000000>;
+ 0x0 0x100000>;
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 08a780d..fa9b6bb 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -251,14 +251,14 @@
dma@c300 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma";
+ compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
cell-index = <1>;
reg = <0xc300 0x4>; /* DMA general status register */
ranges = <0x0 0xc100 0x200>;
dma-channel@0 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,mpc8540-dma-channel";
+ "fsl,eloplus-dma-channel";
cell-index = <0>;
reg = <0x0 0x80>;
interrupt-parent = <&mpic>;
@@ -266,7 +266,7 @@
};
dma-channel@1 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,mpc8540-dma-channel";
+ "fsl,eloplus-dma-channel";
cell-index = <1>;
reg = <0x80 0x80>;
interrupt-parent = <&mpic>;
@@ -274,7 +274,7 @@
};
dma-channel@2 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,mpc8540-dma-channel";
+ "fsl,eloplus-dma-channel";
cell-index = <2>;
reg = <0x100 0x80>;
interrupt-parent = <&mpic>;
@@ -282,7 +282,7 @@
};
dma-channel@3 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,mpc8540-dma-channel";
+ "fsl,eloplus-dma-channel";
cell-index = <3>;
reg = <0x180 0x80>;
interrupt-parent = <&mpic>;
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 7d18440..5428f9f 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Fri Apr 11 11:10:09 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:21 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -110,12 +113,14 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -196,7 +201,6 @@
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -211,11 +215,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -239,6 +245,7 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -248,11 +255,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -300,8 +307,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -362,6 +367,7 @@
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -445,6 +451,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -641,7 +648,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -661,6 +667,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -668,6 +675,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -724,6 +732,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -751,7 +760,6 @@
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -762,13 +770,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -795,6 +796,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -804,17 +806,12 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@@ -919,12 +916,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -977,16 +984,20 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1004,6 +1015,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1023,7 +1035,9 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1061,6 +1075,7 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1072,6 +1087,7 @@
CONFIG_USB_NET2280=y
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@@ -1090,6 +1106,7 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -1144,11 +1161,8 @@
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1168,7 +1182,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1237,7 +1250,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1282,6 +1294,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1302,6 +1315,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1312,6 +1326,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1324,6 +1339,7 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1335,6 +1351,7 @@
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1345,51 +1362,81 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 1f57456..9bc3a03 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:15 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:21 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -110,12 +113,14 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -210,11 +215,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -238,6 +245,7 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -247,11 +255,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -299,8 +307,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -361,6 +367,7 @@
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -444,6 +451,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -549,7 +557,11 @@
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -559,13 +571,11 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-CONFIG_SATA_FSL=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -605,6 +615,7 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -698,7 +709,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -718,6 +728,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -725,6 +736,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -781,6 +793,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -808,7 +821,6 @@
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -819,13 +831,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -852,6 +857,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -861,17 +867,12 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@@ -976,12 +977,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -1034,16 +1045,20 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1061,6 +1076,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1080,7 +1096,9 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1118,6 +1136,7 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1129,6 +1148,7 @@
CONFIG_USB_NET2280=y
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@@ -1147,6 +1167,7 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -1201,11 +1222,8 @@
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1225,7 +1243,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1294,7 +1311,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1339,6 +1355,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1351,6 +1368,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1358,6 +1376,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1368,6 +1387,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1380,6 +1400,7 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1391,6 +1412,7 @@
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1401,51 +1423,81 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 50cceda..1eca26f 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:36:51 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:22 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -110,12 +113,14 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -212,11 +217,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -239,6 +246,7 @@
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -248,11 +256,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -300,8 +308,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -355,6 +361,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -522,7 +529,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -546,6 +552,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -553,6 +560,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -600,6 +608,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -628,7 +637,6 @@
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -639,13 +647,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -671,6 +672,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -680,19 +682,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -775,12 +771,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -811,6 +817,8 @@
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -819,6 +827,7 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -870,11 +879,8 @@
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -894,7 +900,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -952,7 +957,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -995,6 +999,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1005,6 +1010,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1012,6 +1018,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1021,6 +1028,7 @@
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1030,52 +1038,82 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index ac91302..de95d32 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:16 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:24 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -110,12 +113,14 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -212,11 +217,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -239,6 +246,7 @@
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -248,11 +256,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -300,8 +308,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -355,6 +361,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -526,7 +533,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -550,6 +556,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -557,6 +564,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -613,6 +621,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -653,13 +662,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -686,6 +688,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -695,17 +698,12 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@@ -809,12 +807,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -867,16 +875,20 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -894,6 +906,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -913,7 +926,9 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -951,6 +966,7 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
@@ -962,6 +978,7 @@
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
@@ -972,14 +989,11 @@
CONFIG_MMC_SPI=y
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -999,7 +1013,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1060,7 +1073,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1147,6 +1159,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=y
@@ -1157,6 +1170,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1164,6 +1178,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1173,6 +1188,7 @@
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1182,52 +1198,82 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index e1de399..b47fc91 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:17 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:25 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -110,12 +113,14 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -210,11 +215,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -237,6 +244,7 @@
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -246,11 +254,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -298,8 +306,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -432,6 +438,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -541,7 +548,11 @@
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -551,13 +562,11 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -598,6 +607,7 @@
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -659,7 +669,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -679,6 +688,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -686,6 +696,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -722,6 +733,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -749,7 +761,6 @@
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -760,13 +771,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -793,6 +797,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -802,17 +807,12 @@
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@@ -862,12 +862,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -905,16 +915,20 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
@@ -925,6 +939,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -945,6 +960,7 @@
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -982,10 +998,12 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -1040,11 +1058,8 @@
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1064,7 +1079,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1126,7 +1140,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1210,6 +1223,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1220,6 +1234,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1227,6 +1242,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1236,6 +1252,7 @@
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1245,51 +1262,81 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index b4e39cf..fdac484 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:18 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:26 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -110,12 +113,14 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -210,11 +215,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -237,6 +244,7 @@
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -246,11 +254,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -298,8 +306,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -432,6 +438,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -587,7 +594,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -607,6 +613,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -614,6 +621,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -650,6 +658,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -677,7 +686,6 @@
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -688,13 +696,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -721,6 +722,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -730,17 +732,12 @@
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@@ -790,12 +787,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -833,16 +840,20 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
@@ -853,6 +864,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -873,6 +885,7 @@
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -909,10 +922,12 @@
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -967,11 +982,8 @@
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -991,7 +1003,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1053,7 +1064,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1137,6 +1147,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1147,6 +1158,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1154,6 +1166,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1163,6 +1176,7 @@
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1172,51 +1186,81 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index b4e82c0..c82e96e 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:36:56 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:26 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -110,12 +113,14 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -210,11 +215,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -237,6 +244,7 @@
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -246,11 +254,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -298,8 +306,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -353,6 +359,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -471,7 +478,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -491,6 +497,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -498,6 +505,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -544,6 +552,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -571,7 +580,6 @@
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -582,13 +590,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -614,6 +615,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -623,19 +625,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -718,12 +714,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -754,6 +760,8 @@
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -762,6 +770,7 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -813,11 +822,8 @@
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -837,7 +843,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -895,7 +900,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -936,6 +940,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -946,6 +951,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -953,6 +959,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -962,6 +969,7 @@
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -971,51 +979,81 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index d50a96e..20fd9f5 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:36:57 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:27 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -110,12 +113,14 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -210,11 +215,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -237,6 +244,7 @@
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -246,11 +254,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -298,8 +306,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -353,6 +359,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -520,7 +527,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -544,6 +550,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -551,6 +558,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -598,6 +606,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -626,7 +635,6 @@
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -637,13 +645,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -669,6 +670,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -678,19 +680,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -773,12 +769,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -809,6 +815,8 @@
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -817,6 +825,7 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -868,11 +877,8 @@
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -892,7 +898,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -950,7 +955,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -993,6 +997,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1003,6 +1008,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1010,6 +1016,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1019,6 +1026,7 @@
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1028,52 +1036,82 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index f377cde..0f94d9f 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:23 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:28 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
@@ -111,12 +114,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -211,11 +216,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -234,6 +241,7 @@
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -243,11 +251,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -295,8 +303,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -350,6 +356,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -411,8 +418,10 @@
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_MV is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
@@ -459,6 +468,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -503,6 +513,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -537,13 +548,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
CONFIG_I2C_MPC=y
@@ -552,6 +556,7 @@
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -561,19 +566,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -646,12 +645,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -680,6 +689,8 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -688,13 +699,10 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -714,7 +722,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -772,7 +779,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -817,6 +823,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -827,6 +834,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -834,6 +842,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -841,6 +850,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -850,50 +860,80 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index a633176..0d44855 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:24 2008
+# Linux kernel version: 2.6.26-rc5
+# Tue Jun 10 09:17:12 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
@@ -111,12 +114,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -211,11 +216,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -234,6 +241,7 @@
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -243,11 +251,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -290,8 +298,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -345,6 +351,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -352,6 +359,7 @@
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
@@ -406,8 +414,10 @@
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_MV is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
# CONFIG_PATA_PLATFORM is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
@@ -444,7 +454,7 @@
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
@@ -464,6 +474,16 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -508,6 +528,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -542,13 +563,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
CONFIG_I2C_MPC=y
@@ -557,6 +571,8 @@
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -566,19 +582,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -642,6 +652,11 @@
CONFIG_83xx_WDT=y
#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
@@ -651,13 +666,24 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
@@ -680,6 +706,14 @@
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -695,33 +729,83 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -741,7 +825,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -799,7 +882,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -844,6 +926,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -854,6 +937,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -861,6 +945,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -868,6 +953,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -881,50 +967,80 @@
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 1f15182..1752918 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:38 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:30 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -109,12 +112,14 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -209,11 +214,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -232,6 +239,7 @@
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -241,11 +249,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -293,8 +301,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -348,6 +354,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -420,6 +427,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -464,6 +472,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -498,13 +507,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
CONFIG_I2C_MPC=y
@@ -513,6 +515,7 @@
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -522,19 +525,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -607,12 +604,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -640,13 +647,10 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -659,7 +663,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -717,7 +720,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -746,6 +748,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -756,6 +759,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -763,6 +767,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -770,6 +775,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -779,50 +785,80 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 2d0debc..b82bb04 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Mon Feb 11 16:25:19 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:30 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -68,23 +70,22 @@
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -92,6 +93,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -109,6 +111,8 @@
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -134,7 +138,6 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
#
# Platform support
@@ -191,12 +194,13 @@
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -207,16 +211,17 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
CONFIG_ISA_DMA_API=y
#
@@ -229,6 +234,7 @@
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -238,11 +244,12 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -290,8 +297,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -351,6 +356,8 @@
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -430,17 +437,19 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_IDEDISK is not set
@@ -457,7 +466,7 @@
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -517,6 +526,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -561,6 +571,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -594,12 +605,7 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -615,6 +621,7 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -627,12 +634,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -660,19 +677,20 @@
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
@@ -693,14 +711,11 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -743,15 +758,16 @@
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -790,6 +806,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -800,6 +817,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -807,6 +825,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -817,7 +836,9 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -829,9 +850,9 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
@@ -841,6 +862,7 @@
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -852,48 +874,78 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index b998539..f33fd51 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:25 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:31 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -113,6 +116,7 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -153,6 +157,7 @@
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -208,11 +213,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -229,6 +236,7 @@
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -238,11 +246,12 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -290,8 +299,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -419,6 +426,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -463,6 +471,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -494,12 +503,7 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -528,12 +532,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -561,6 +575,8 @@
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -569,13 +585,10 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -595,7 +608,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -652,7 +664,6 @@
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -691,6 +702,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -701,6 +713,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -708,6 +721,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -718,6 +732,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -730,6 +745,7 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -740,6 +756,7 @@
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -750,47 +767,77 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
index a9f113b..042a85e 100644
--- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:03 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:32 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -90,6 +92,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -117,12 +120,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
@@ -203,7 +208,6 @@
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -219,11 +223,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -248,6 +254,7 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -257,11 +264,12 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -332,8 +340,10 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -395,6 +405,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -501,7 +512,11 @@
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -511,13 +526,11 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -557,6 +570,7 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -622,7 +636,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -642,6 +655,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -649,6 +663,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -713,6 +728,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -744,7 +760,6 @@
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -755,13 +770,6 @@
# CONFIG_I2C_CHARDEV is not set
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -788,6 +796,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -797,19 +806,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -826,13 +829,33 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=m
-# CONFIG_DVB_CORE_ATTACH is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_DVB_CAPTURE_DRIVERS=y
#
@@ -875,14 +898,17 @@
#
# DVB-S (satellite) frontends
#
-# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
#
# DVB-T (terrestrial) frontends
@@ -900,6 +926,7 @@
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
#
# DVB-C (cable) frontends
@@ -918,27 +945,21 @@
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
#
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TDA18271 is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_XC5000 is not set
#
-# Miscellaneous devices
+# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -1005,6 +1026,7 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1079,11 +1101,11 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -1118,16 +1140,20 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1145,6 +1171,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1164,7 +1191,9 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1202,10 +1231,12 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -1257,23 +1288,19 @@
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_FSL_DMA=y
-# CONFIG_FSL_DMA_SELFTEST is not set
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1293,7 +1320,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1363,10 +1389,9 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1450,9 +1475,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1469,6 +1495,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1479,6 +1506,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1492,6 +1520,7 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1503,6 +1532,7 @@
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1513,52 +1543,82 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 851ac91..e19592b 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:27 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:33 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -113,6 +116,7 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -153,6 +157,7 @@
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -210,11 +215,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -238,6 +245,7 @@
CONFIG_PCI_DEBUG=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -247,11 +255,12 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -299,8 +308,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -462,7 +469,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -482,6 +488,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -489,6 +496,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -535,6 +543,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -572,12 +581,7 @@
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -610,12 +614,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -646,6 +660,8 @@
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -654,14 +670,11 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -681,7 +694,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -738,7 +750,6 @@
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -777,6 +788,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -787,6 +799,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -794,6 +807,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -804,6 +818,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -816,6 +831,7 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -827,6 +843,7 @@
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -837,49 +854,79 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
index 2b866b3..28004e9 100644
--- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:05 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:34 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -111,12 +114,14 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -156,6 +161,7 @@
# CONFIG_MPC85xx_CDS is not set
CONFIG_MPC85xx_MDS=y
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -212,11 +218,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -240,6 +248,7 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -249,11 +258,12 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -301,8 +311,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -358,6 +366,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -525,7 +534,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -546,6 +554,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -553,6 +562,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -600,6 +610,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -629,7 +640,6 @@
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -640,13 +650,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -672,6 +675,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -681,19 +685,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -776,12 +774,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -812,6 +820,8 @@
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -820,6 +830,7 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -871,11 +882,8 @@
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -895,7 +903,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -953,7 +960,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -994,6 +1000,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1004,6 +1011,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1011,6 +1019,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1021,6 +1030,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1033,6 +1043,7 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1045,6 +1056,7 @@
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUGGER=y
# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
@@ -1066,52 +1078,82 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
index 53aa6f3..03627cfe 100644
--- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:06 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:35 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -90,6 +92,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -117,12 +120,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
@@ -162,6 +167,7 @@
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
CONFIG_MPC85xx_DS=y
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -217,11 +223,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -246,6 +254,7 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -255,11 +264,12 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -330,8 +340,10 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -393,6 +405,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -499,7 +512,11 @@
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -509,13 +526,11 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -555,6 +570,7 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -620,7 +636,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -640,6 +655,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -647,6 +663,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -711,6 +728,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -742,7 +760,6 @@
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -753,13 +770,6 @@
# CONFIG_I2C_CHARDEV is not set
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -786,6 +796,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -795,19 +806,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -824,13 +829,33 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=m
-# CONFIG_DVB_CORE_ATTACH is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_DVB_CAPTURE_DRIVERS=y
#
@@ -873,14 +898,17 @@
#
# DVB-S (satellite) frontends
#
-# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
#
# DVB-T (terrestrial) frontends
@@ -898,6 +926,7 @@
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
#
# DVB-C (cable) frontends
@@ -916,27 +945,21 @@
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
#
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TDA18271 is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_XC5000 is not set
#
-# Miscellaneous devices
+# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -1003,6 +1026,7 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1077,11 +1101,11 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -1116,16 +1140,20 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1143,6 +1171,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1162,7 +1191,9 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1200,10 +1231,12 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -1255,11 +1288,8 @@
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1279,7 +1309,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1349,10 +1378,9 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1436,9 +1464,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1447,6 +1476,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1454,6 +1484,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1464,6 +1495,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1477,6 +1509,7 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1488,6 +1521,7 @@
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1498,52 +1532,82 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index a469fe9..b09f003 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:30 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:36 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -113,6 +116,7 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -153,6 +157,7 @@
CONFIG_MPC85xx_CDS=y
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -208,11 +213,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -236,6 +243,7 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -245,11 +253,12 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -297,8 +306,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -437,7 +444,7 @@
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -515,7 +522,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -535,6 +541,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -542,6 +549,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -588,6 +596,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -624,12 +633,7 @@
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -662,12 +666,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -698,6 +712,8 @@
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -706,14 +722,11 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -733,7 +746,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -790,7 +802,6 @@
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -829,6 +840,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -839,6 +851,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -846,6 +859,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -856,6 +870,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -868,6 +883,7 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -878,6 +894,7 @@
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -888,48 +905,78 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 67f6797..24f7f44 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:39 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:37 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
@@ -111,6 +114,7 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -151,6 +155,7 @@
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -206,11 +211,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -233,6 +240,7 @@
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -242,11 +250,12 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -294,8 +303,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -449,7 +456,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -469,6 +475,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -476,6 +483,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -522,6 +530,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -558,12 +567,7 @@
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -596,12 +600,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -628,14 +642,11 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -648,7 +659,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -705,7 +715,6 @@
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -732,6 +741,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -742,6 +752,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -749,6 +760,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -756,6 +768,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -765,48 +778,78 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index fef6055..655518dc 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:39 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:38 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -112,6 +115,7 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -152,6 +156,7 @@
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -207,11 +212,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -228,6 +235,7 @@
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -237,11 +245,12 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -289,8 +298,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -418,6 +425,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -462,6 +470,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -487,17 +496,11 @@
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -526,12 +529,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -559,6 +572,8 @@
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -567,6 +582,7 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -602,11 +618,8 @@
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -619,7 +632,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -676,7 +688,6 @@
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -715,6 +726,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -725,6 +737,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -732,6 +745,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -742,6 +756,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -753,6 +768,7 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -763,6 +779,7 @@
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
@@ -784,47 +801,77 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index 1d303c4..7804ca1 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:42 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:38 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -114,12 +117,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
@@ -158,6 +163,7 @@
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
CONFIG_STX_GP3=y
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -215,11 +221,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -243,6 +251,7 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -252,11 +261,12 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -304,8 +314,6 @@
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -418,6 +426,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=m
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
@@ -505,7 +514,7 @@
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -653,7 +662,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -673,6 +681,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -680,6 +689,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -753,6 +763,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -796,13 +807,6 @@
CONFIG_I2C_CHARDEV=m
#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -829,6 +833,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -838,19 +843,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -920,12 +919,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -973,6 +982,8 @@
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -981,15 +992,12 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1009,7 +1017,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1073,7 +1080,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1141,9 +1147,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
@@ -1152,6 +1159,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1159,6 +1167,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1169,6 +1178,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1182,6 +1192,7 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1194,6 +1205,7 @@
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
CONFIG_BDI_SWITCH=y
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1204,50 +1216,80 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index d39ee3b..e0b5559 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:43 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:39 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
@@ -111,6 +114,7 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -151,6 +155,7 @@
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
CONFIG_TQM8540=y
# CONFIG_TQM8541 is not set
@@ -171,7 +176,6 @@
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_CPM2 is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
# CONFIG_FSL_ULI1575 is not set
#
@@ -208,11 +212,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -233,6 +239,7 @@
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -242,11 +249,12 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -294,8 +302,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -352,6 +358,7 @@
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -423,6 +430,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -506,7 +514,7 @@
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -600,7 +608,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -620,6 +627,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -627,6 +635,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -673,6 +682,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -713,13 +723,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -744,6 +747,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -753,19 +757,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -835,12 +833,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -871,6 +879,8 @@
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -879,14 +889,11 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -906,7 +913,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -974,7 +980,6 @@
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1013,6 +1018,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1025,6 +1031,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1032,6 +1039,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1041,6 +1049,7 @@
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1050,48 +1059,78 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index cbf6ad2..6f9067b 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:44 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:40 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
@@ -111,6 +114,7 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -151,6 +155,7 @@
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_TQM8541=y
@@ -209,11 +214,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -234,6 +241,7 @@
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -243,11 +251,12 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -295,8 +304,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -353,6 +360,7 @@
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -424,6 +432,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -507,7 +516,7 @@
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -602,7 +611,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -622,6 +630,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -629,6 +638,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -675,6 +685,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -723,13 +734,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -754,6 +758,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -763,19 +768,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -845,12 +844,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -881,6 +890,8 @@
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -889,14 +900,11 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -916,7 +924,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -984,7 +991,6 @@
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1023,6 +1029,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1035,6 +1042,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1042,6 +1050,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1052,6 +1061,7 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1061,49 +1071,79 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index bbff962..03120b5 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:44 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:41 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
@@ -111,6 +114,7 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -151,6 +155,7 @@
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -209,11 +214,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -234,6 +241,7 @@
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -243,11 +251,12 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -295,8 +304,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -353,6 +360,7 @@
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -424,6 +432,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -507,7 +516,7 @@
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -602,7 +611,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -622,6 +630,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -629,6 +638,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -675,6 +685,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -723,13 +734,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -754,6 +758,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -763,19 +768,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -845,12 +844,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -881,6 +890,8 @@
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -889,14 +900,11 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -916,7 +924,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -984,7 +991,6 @@
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1023,6 +1029,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1035,6 +1042,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1042,6 +1050,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1052,6 +1061,7 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1061,49 +1071,79 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index 63c5ec8..3113257 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:45 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:42 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
@@ -111,6 +114,7 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -151,6 +155,7 @@
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -209,11 +214,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -234,6 +241,7 @@
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -243,11 +251,12 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -295,8 +304,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -353,6 +360,7 @@
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -424,6 +432,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -507,7 +516,7 @@
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -602,7 +611,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -622,6 +630,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -629,6 +638,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -675,6 +685,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -723,13 +734,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -754,6 +758,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -763,19 +768,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -845,12 +844,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -881,6 +890,8 @@
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -889,14 +900,11 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -916,7 +924,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -984,7 +991,6 @@
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1023,6 +1029,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1035,6 +1042,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1042,6 +1050,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1052,6 +1061,7 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1061,49 +1071,79 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index a3cc94a..6740f2a 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Wed Feb 20 12:26:07 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:08 2008
#
# CONFIG_PPC64 is not set
@@ -28,6 +28,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -75,6 +77,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
@@ -107,6 +110,8 @@
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
@@ -131,7 +136,6 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
#
# Platform support
@@ -194,7 +198,6 @@
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
@@ -213,11 +216,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -235,6 +240,7 @@
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -244,13 +250,13 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
@@ -293,8 +299,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -482,6 +486,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -548,6 +553,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -580,12 +586,7 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -602,12 +603,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -632,12 +643,10 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
@@ -650,7 +659,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
@@ -708,7 +716,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -751,6 +758,7 @@
#
# Library routines
#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -761,6 +769,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -768,6 +777,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -778,6 +788,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -788,6 +799,7 @@
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -798,6 +810,7 @@
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -811,3 +824,4 @@
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 2b1504e..ba2a463 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:09 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:09 2008
#
# CONFIG_PPC64 is not set
@@ -30,6 +30,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -70,18 +72,16 @@
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -107,6 +107,7 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -194,11 +195,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -215,6 +218,7 @@
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -224,11 +228,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
@@ -283,6 +287,7 @@
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
@@ -498,6 +503,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -521,6 +527,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -552,12 +559,7 @@
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -574,12 +576,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -603,12 +615,9 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -675,7 +684,6 @@
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -752,6 +760,7 @@
#
# Library routines
#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -763,6 +772,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -770,6 +780,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -780,6 +791,7 @@
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -791,6 +803,7 @@
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -802,6 +815,7 @@
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
CONFIG_BDI_SWITCH=y
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -811,45 +825,75 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index 125b476..ac72b48 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:10 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:09 2008
#
# CONFIG_PPC64 is not set
@@ -28,6 +28,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -108,6 +110,7 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
@@ -212,11 +215,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -234,6 +239,7 @@
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -243,13 +249,13 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
@@ -292,8 +298,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -481,6 +485,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -505,6 +510,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -537,12 +543,7 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -559,12 +560,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -588,13 +599,10 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -607,7 +615,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
@@ -665,7 +672,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -708,6 +714,7 @@
#
# Library routines
#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -718,6 +725,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -725,6 +733,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -735,6 +744,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -745,6 +755,7 @@
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -755,6 +766,7 @@
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -767,3 +779,4 @@
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index db34909..0ccc6e4 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:01:18 2008
+# Linux kernel version: 2.6.26-rc6
+# Mon Jun 16 21:08:31 2008
#
CONFIG_PPC64=y
@@ -597,7 +597,61 @@
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_ATA_SFF is not set
+CONFIG_ATA_SFF=y
+CONFIG_SATA_SVW=y
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -1230,6 +1284,7 @@
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1345,6 +1400,7 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 22a943a..48434c2c 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:10 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:10 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -91,6 +93,7 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -118,12 +121,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -223,11 +228,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -251,6 +258,7 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -260,11 +268,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -313,8 +321,6 @@
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -329,6 +335,7 @@
# CONFIG_NF_CT_ACCT is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
@@ -407,6 +414,7 @@
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_NF_NAT_SNMP_BASIC is not set
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -459,8 +467,6 @@
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-CONFIG_IEEE80211_SOFTMAC_DEBUG=y
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -486,6 +492,7 @@
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -565,6 +572,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -670,7 +678,11 @@
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -680,13 +692,11 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -726,6 +736,7 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -785,7 +796,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -805,6 +815,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -812,6 +823,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -886,6 +898,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -913,7 +926,6 @@
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -924,13 +936,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -957,6 +962,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -966,19 +972,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -1048,12 +1048,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -1115,12 +1125,14 @@
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1138,6 +1150,7 @@
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1159,6 +1172,7 @@
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1202,9 +1216,11 @@
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -1238,10 +1254,12 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -1293,11 +1311,8 @@
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1318,10 +1333,9 @@
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1388,12 +1402,10 @@
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1467,9 +1479,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1481,6 +1494,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1488,6 +1502,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1498,6 +1513,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1510,6 +1526,7 @@
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1521,6 +1538,7 @@
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1532,52 +1550,82 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index a3d52e3..066c583 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:11 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:11 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
@@ -111,6 +114,7 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -209,11 +213,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -235,6 +241,7 @@
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -244,11 +251,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -296,8 +303,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -454,7 +459,10 @@
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_MV=y
@@ -464,7 +472,6 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -509,6 +516,7 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -596,7 +604,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -616,6 +623,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -623,6 +631,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -670,6 +679,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -705,12 +715,7 @@
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -743,12 +748,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -779,6 +794,8 @@
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -787,14 +804,11 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -814,7 +828,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -871,7 +884,6 @@
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -914,6 +926,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -924,6 +937,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -931,6 +945,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -940,6 +955,7 @@
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -950,48 +966,78 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 0264c57..30d7834 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:13 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:12 2008
#
# CONFIG_PPC64 is not set
@@ -30,6 +30,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -70,18 +72,16 @@
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -108,6 +108,7 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -196,11 +197,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -224,6 +227,7 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -233,11 +237,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
@@ -292,6 +296,7 @@
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
@@ -536,7 +541,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -554,6 +558,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -561,6 +566,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_PPP=y
@@ -634,6 +640,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -668,12 +675,7 @@
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -690,12 +692,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -722,13 +734,10 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -798,7 +807,6 @@
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -877,6 +885,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -889,6 +898,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -896,6 +906,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -906,6 +917,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -918,6 +930,7 @@
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -929,6 +942,7 @@
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
CONFIG_BDI_SWITCH=y
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -938,45 +952,75 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 9e0dd82..4293c8b 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc9
-# Tue Apr 15 18:07:36 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:14 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
@@ -111,12 +114,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -201,7 +206,6 @@
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -217,11 +221,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -240,6 +246,7 @@
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -249,11 +256,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -301,8 +308,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -361,6 +366,7 @@
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -439,6 +445,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -501,8 +508,10 @@
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_MV is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
@@ -554,6 +563,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -607,6 +617,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -642,13 +653,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
CONFIG_I2C_MPC=y
@@ -658,6 +662,7 @@
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -667,19 +672,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -757,12 +756,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -810,16 +819,20 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
@@ -828,6 +841,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -873,17 +887,15 @@
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -903,7 +915,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -962,7 +973,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1009,6 +1019,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1027,6 +1038,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1034,6 +1046,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1043,51 +1056,81 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 2075722..3efab71 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:08 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 09:03:46 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -90,6 +92,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -117,12 +120,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
@@ -162,6 +167,7 @@
CONFIG_MPC85xx_CDS=y
CONFIG_MPC85xx_MDS=y
CONFIG_MPC85xx_DS=y
+CONFIG_KSI8560=y
# CONFIG_STX_GP3 is not set
CONFIG_TQM8540=y
CONFIG_TQM8541=y
@@ -221,11 +227,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -250,6 +258,7 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -259,11 +268,12 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -334,8 +344,10 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -397,6 +409,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -503,7 +516,11 @@
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -513,13 +530,11 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -559,6 +574,7 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -625,7 +641,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -646,6 +661,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -653,6 +669,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -717,6 +734,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -750,7 +768,6 @@
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -761,13 +778,6 @@
# CONFIG_I2C_CHARDEV is not set
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -794,6 +804,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -803,19 +814,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -832,13 +837,33 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=m
-# CONFIG_DVB_CORE_ATTACH is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_DVB_CAPTURE_DRIVERS=y
#
@@ -881,14 +906,17 @@
#
# DVB-S (satellite) frontends
#
-# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
#
# DVB-T (terrestrial) frontends
@@ -906,6 +934,7 @@
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
#
# DVB-C (cable) frontends
@@ -924,27 +953,21 @@
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
#
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TDA18271 is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_XC5000 is not set
#
-# Miscellaneous devices
+# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -1011,6 +1034,7 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1085,11 +1109,11 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -1124,16 +1148,20 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1151,6 +1179,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1170,7 +1199,9 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1208,12 +1239,21 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1263,11 +1303,19 @@
#
# on-CPU RTC drivers
#
-# CONFIG_DMADEVICES is not set
+# CONFIG_RTC_DRV_PPC is not set
+CONFIG_DMADEVICES=y
#
-# Userspace I/O
+# DMA Devices
#
+CONFIG_FSL_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
# CONFIG_UIO is not set
#
@@ -1287,7 +1335,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1357,10 +1404,9 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1444,9 +1490,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1455,6 +1502,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1462,6 +1510,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1472,6 +1521,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1485,6 +1535,7 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1497,6 +1548,7 @@
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1507,53 +1559,83 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig
index 7e5b9ce..5612d40 100644
--- a/arch/powerpc/configs/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:33 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:50:24 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -60,9 +62,10 @@
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
@@ -86,6 +89,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -110,14 +114,22 @@
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
@@ -151,6 +163,7 @@
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
# CONFIG_MPC8641_HPCN is not set
+# CONFIG_SBC8641D is not set
CONFIG_MPC8610_HPCD=y
CONFIG_MPC8610=y
# CONFIG_IPIC is not set
@@ -199,11 +212,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -223,12 +238,14 @@
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -238,11 +255,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -303,8 +320,10 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -446,6 +465,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -504,6 +524,7 @@
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
@@ -553,7 +574,11 @@
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -563,13 +588,11 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -609,6 +632,7 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -628,25 +652,9 @@
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
@@ -663,64 +671,10 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_GIANFAR is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
@@ -728,6 +682,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -783,6 +738,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -824,13 +780,6 @@
# CONFIG_I2C_CHARDEV is not set
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -852,9 +801,11 @@
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -864,19 +815,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -893,12 +838,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -908,7 +863,56 @@
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+CONFIG_FB_FSL_DIU=y
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -922,6 +926,8 @@
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
#
# Sound
@@ -938,7 +944,7 @@
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_PCM_OSS_PLUGINS is not set
+CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
@@ -965,6 +971,7 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1031,14 +1038,14 @@
CONFIG_SND_SOC=y
#
-# SoC Audio support for SuperH
-#
-
-#
# ALSA SoC audio for Freescale SOCs
#
CONFIG_SND_SOC_MPC8610=y
CONFIG_SND_SOC_MPC8610_HPCD=y
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
@@ -1055,6 +1062,8 @@
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1063,14 +1072,11 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1090,7 +1096,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
@@ -1134,6 +1139,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
@@ -1147,10 +1153,9 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1234,6 +1239,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1244,6 +1250,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1251,6 +1258,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1261,6 +1269,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1274,9 +1283,11 @@
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
@@ -1284,6 +1295,7 @@
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1294,48 +1306,80 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
index d01dcdb..4a81715 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:11 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:15 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -90,6 +92,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -117,12 +120,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
@@ -162,6 +167,7 @@
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_MPC8641_HPCN=y
+# CONFIG_SBC8641D is not set
# CONFIG_MPC8610_HPCD is not set
CONFIG_MPC8641=y
# CONFIG_IPIC is not set
@@ -211,11 +217,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -240,6 +248,8 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
#
# Advanced setup
@@ -249,11 +259,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -324,8 +334,10 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -387,6 +399,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -493,7 +506,11 @@
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -503,13 +520,11 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -549,6 +564,7 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -614,7 +630,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -634,6 +649,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -641,6 +657,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -705,6 +722,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -736,7 +754,6 @@
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -747,13 +764,6 @@
# CONFIG_I2C_CHARDEV is not set
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -780,6 +790,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -789,19 +800,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -818,13 +823,33 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=m
-# CONFIG_DVB_CORE_ATTACH is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_DVB_CAPTURE_DRIVERS=y
#
@@ -867,14 +892,17 @@
#
# DVB-S (satellite) frontends
#
-# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
#
# DVB-T (terrestrial) frontends
@@ -892,6 +920,7 @@
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
#
# DVB-C (cable) frontends
@@ -910,27 +939,21 @@
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
#
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TDA18271 is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_XC5000 is not set
#
-# Miscellaneous devices
+# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -997,6 +1020,7 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1071,11 +1095,11 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -1110,16 +1134,20 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1137,6 +1165,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1156,7 +1185,9 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1194,10 +1225,12 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -1249,11 +1282,8 @@
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1273,7 +1303,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1343,10 +1372,9 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1430,9 +1458,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1441,6 +1470,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1448,6 +1478,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1458,6 +1489,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1471,6 +1503,7 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1482,6 +1515,7 @@
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1492,52 +1526,82 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 2d831db..46fffbc 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:35 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:16 2008
#
# CONFIG_PPC64 is not set
@@ -28,6 +28,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -106,6 +108,7 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -210,11 +213,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -231,6 +236,7 @@
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -240,13 +246,13 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
@@ -294,8 +300,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -419,6 +423,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -485,6 +490,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -517,12 +523,7 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -551,12 +552,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -584,6 +595,8 @@
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -592,13 +605,10 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -620,7 +630,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -678,7 +687,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -722,6 +730,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -733,6 +742,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -740,6 +750,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -748,6 +759,7 @@
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -757,48 +769,78 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 82151b9..9df78973 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:35 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:17 2008
#
# CONFIG_PPC64 is not set
@@ -28,6 +28,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -108,6 +110,7 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
@@ -219,11 +222,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -241,6 +246,7 @@
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -250,13 +256,13 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
@@ -299,8 +305,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -492,6 +496,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -516,6 +521,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -548,12 +554,7 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -570,12 +571,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -599,13 +610,10 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -618,7 +626,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
@@ -676,7 +683,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -719,6 +725,7 @@
#
# Library routines
#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -729,6 +736,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -736,6 +744,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -746,6 +755,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -756,6 +766,7 @@
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -766,6 +777,7 @@
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -778,3 +790,4 @@
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 09f3062..199e5f5 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Tue Mar 25 10:25:48 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 27 16:08:06 2008
#
CONFIG_PPC64=y
@@ -29,6 +29,9 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -87,6 +90,7 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -115,12 +119,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -167,11 +173,11 @@
CONFIG_PPC_PASEMI_IOMMU=y
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
CONFIG_PPC_PASEMI_MDIO=y
-# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
# CONFIG_IPIC is not set
@@ -192,6 +198,7 @@
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -226,7 +233,6 @@
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
@@ -249,12 +255,14 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_PPC_64K_PAGES=y
+CONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_PPC_SUBPAGE_PROT is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
@@ -290,9 +298,12 @@
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
-# CONFIG_ELECTRA_CF is not set
+CONFIG_ELECTRA_CF=y
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
@@ -341,8 +352,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -473,6 +482,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -520,7 +530,6 @@
#
# IDE chipset support/bugfixes
#
-# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
#
@@ -554,7 +563,7 @@
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -632,7 +641,10 @@
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_MV=y
@@ -642,7 +654,6 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-CONFIG_SATA_SIL24=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -689,6 +700,7 @@
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -791,7 +803,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
@@ -810,6 +821,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -817,6 +829,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -890,6 +903,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -917,7 +931,6 @@
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_PASEMI=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -936,13 +949,7 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALGOPCF=y
-CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
@@ -971,6 +978,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -980,19 +988,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -1062,12 +1064,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -1094,8 +1106,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
@@ -1213,6 +1225,7 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1292,11 +1305,11 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -1334,11 +1347,13 @@
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1354,6 +1369,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1375,6 +1391,7 @@
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
@@ -1416,6 +1433,7 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
@@ -1475,10 +1493,6 @@
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1576,12 +1590,10 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1665,9 +1677,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1677,6 +1690,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1684,6 +1698,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1694,18 +1709,23 @@
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1735,53 +1755,83 @@
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=y
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=y
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 40f84fa2..ce250bc 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:03:02 2008
+# Linux kernel version: 2.6.26-rc6
+# Mon Jun 16 21:11:19 2008
#
CONFIG_PPC64=y
@@ -763,7 +763,63 @@
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_SIL24=y
-# CONFIG_ATA_SFF is not set
+CONFIG_ATA_SFF=y
+CONFIG_SATA_SVW=y
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCC is not set
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -1478,6 +1534,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1537,6 +1594,7 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1597,6 +1655,7 @@
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
@@ -1617,6 +1676,7 @@
#
# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_PPC=y
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index 1383eb6..bc3bf62 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:36 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:18 2008
#
# CONFIG_PPC64 is not set
@@ -30,6 +30,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -70,19 +72,17 @@
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -109,6 +109,7 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -196,11 +197,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -225,6 +228,7 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -234,11 +238,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
@@ -293,6 +297,7 @@
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
@@ -513,7 +518,7 @@
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -593,7 +598,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -611,6 +615,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -618,6 +623,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_PPP=y
@@ -692,6 +698,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -726,12 +733,7 @@
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -748,12 +750,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -781,11 +793,14 @@
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
@@ -795,6 +810,7 @@
# CONFIG_USB_GADGET_PXA2XX is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@@ -804,6 +820,7 @@
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
@@ -812,13 +829,10 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -888,7 +902,6 @@
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -967,6 +980,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -979,6 +993,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -986,6 +1001,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -996,6 +1012,7 @@
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1008,6 +1025,7 @@
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1019,6 +1037,7 @@
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
CONFIG_BDI_SWITCH=y
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1028,46 +1047,76 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index f912168..c6b8357 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:15 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:18 2008
#
# CONFIG_PPC64 is not set
@@ -33,6 +33,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -92,6 +94,7 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
@@ -117,6 +120,7 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -215,11 +219,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -241,6 +247,7 @@
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -250,13 +257,13 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -304,8 +311,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -364,6 +369,7 @@
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -435,6 +441,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -519,7 +526,7 @@
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -598,7 +605,10 @@
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_MV=y
@@ -608,7 +618,6 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -653,6 +662,7 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -744,7 +754,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -763,6 +772,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -770,6 +780,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -832,6 +843,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -855,7 +867,6 @@
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -866,13 +877,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -898,6 +902,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_MV64XXX=y
#
@@ -908,19 +913,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -990,12 +989,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -1055,11 +1064,13 @@
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1074,6 +1085,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1120,10 +1132,12 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -1175,11 +1189,8 @@
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1199,7 +1210,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1257,7 +1267,6 @@
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1300,6 +1309,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1310,6 +1320,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1317,6 +1328,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1326,6 +1338,7 @@
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1336,48 +1349,78 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/sbc8641d_defconfig
index 3180125..8227510 100644
--- a/arch/powerpc/configs/sbc8641d_defconfig
+++ b/arch/powerpc/configs/sbc8641d_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Apr 10 18:03:25 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:19 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_LOCKBREAK=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -90,6 +92,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -116,12 +119,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -197,7 +202,6 @@
# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -213,11 +217,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -237,12 +243,14 @@
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -252,11 +260,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -328,8 +336,10 @@
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
@@ -534,6 +544,7 @@
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -610,6 +621,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -727,7 +739,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -743,6 +754,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
@@ -825,6 +837,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -863,13 +876,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -895,6 +901,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -904,19 +911,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -998,12 +999,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -1041,6 +1052,8 @@
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1049,14 +1062,11 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1084,8 +1094,8 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
@@ -1145,7 +1155,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1221,6 +1230,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1241,6 +1251,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -1251,6 +1262,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -1262,6 +1274,7 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1274,6 +1287,7 @@
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUGGER=y
# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1289,54 +1303,84 @@
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index fdbfd39..88f6aa8 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:19 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:20 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -85,6 +87,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -109,12 +112,14 @@
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -214,11 +219,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
@@ -242,6 +249,7 @@
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -251,11 +259,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -298,8 +306,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -358,6 +364,7 @@
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -433,6 +440,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -513,7 +521,7 @@
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -638,7 +646,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -654,6 +661,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -690,6 +698,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -717,7 +726,6 @@
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -728,13 +736,6 @@
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -761,6 +762,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -770,19 +772,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -799,12 +795,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -841,16 +847,20 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -865,6 +875,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -885,6 +896,7 @@
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -922,10 +934,12 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -977,11 +991,8 @@
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1002,10 +1013,9 @@
# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1138,6 +1148,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1150,6 +1161,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1157,6 +1169,7 @@
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1166,6 +1179,7 @@
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1181,3 +1195,4 @@
CONFIG_ASYNC_XOR=y
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index c2b9dc4..22b5d2c 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -368,7 +368,12 @@
rlwimi r11,r13,0,26,31 /* Insert static perms */
- rlwinm r11,r11,0,20,15 /* Clear U0-U3 */
+ /*
+ * Clear U0-U3 and WL1 IL1I IL1D IL2I IL2D bits which are added
+ * on newer 440 cores like the 440x6 used on AMCC 460EX/460GT (see
+ * include/asm-powerpc/pgtable-ppc32.h for details).
+ */
+ rlwinm r11,r11,0,20,10
/* find the TLB index that caused the fault. It has to be here. */
tlbsx r10, 0, r10
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 2f73f70..bcc249d 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -1073,7 +1073,7 @@
static int __init irq_debugfs_init(void)
{
if (debugfs_create_file("virq_mapping", S_IRUGO, powerpc_debugfs_root,
- NULL, &virq_debug_fops))
+ NULL, &virq_debug_fops) == NULL)
return -ENOMEM;
return 0;
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 61dd174..4d96e1d 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -33,13 +33,14 @@
phys_addr_t taddr;
} legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
-static struct __initdata of_device_id parents[] = {
+static struct __initdata of_device_id legacy_serial_parents[] = {
{.type = "soc",},
{.type = "tsi-bridge",},
{.type = "opb", },
{.compatible = "ibm,opb",},
{.compatible = "simple-bus",},
{.compatible = "wrs,epld-localbus",},
+ {},
};
static unsigned int legacy_serial_count;
@@ -136,6 +137,11 @@
if (of_get_property(np, "clock-frequency", NULL) == NULL)
return -1;
+ /* if reg-shift or offset, don't try to use it */
+ if ((of_get_property(np, "reg-shift", NULL) != NULL) ||
+ (of_get_property(np, "reg-offset", NULL) != NULL))
+ return -1;
+
/* if rtas uses this device, don't try to use it as well */
if (of_get_property(np, "used-by-rtas", NULL) != NULL)
return -1;
@@ -322,7 +328,7 @@
struct device_node *parent = of_get_parent(np);
if (!parent)
continue;
- if (of_match_node(parents, parent) != NULL) {
+ if (of_match_node(legacy_serial_parents, parent) != NULL) {
index = add_legacy_soc_port(np, np);
if (index >= 0 && np == stdout)
legacy_serial_console = index;
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index e79ad8a..3f37a6e 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -76,6 +76,8 @@
return NULL;
dev->dma_mask = 0xffffffffUL;
+ dev->dev.coherent_dma_mask = DMA_32BIT_MASK;
+
dev->dev.bus = &of_platform_bus_type;
/* We do not fill the DMA ops for platform devices by default.
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 5275074..30eedfc 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -189,7 +189,7 @@
dev->cfg_size = pci_cfg_space_size(dev);
- sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+ dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
dev->class = get_int_prop(node, "class-code", 0);
dev->revision = get_int_prop(node, "revision-id", 0);
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index cf6b5a7..d3ac631 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -8,7 +8,6 @@
#include <linux/screen_info.h>
#include <linux/vt_kern.h>
#include <linux/nvram.h>
-#include <linux/console.h>
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/delay.h>
@@ -160,7 +159,6 @@
EXPORT_SYMBOL(timer_interrupt);
EXPORT_SYMBOL(irq_desc);
EXPORT_SYMBOL(tb_ticks_per_jiffy);
-EXPORT_SYMBOL(console_drivers);
EXPORT_SYMBOL(cacheable_memcpy);
#endif
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 31729a9..2c7e8e8 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -48,6 +48,20 @@
fi
done
+ # ignore register save/restore funcitons
+ if [ "${UNDEF:0:9}" = "_restgpr_" ]; then
+ OK=1
+ fi
+ if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then
+ OK=1
+ fi
+ if [ "${UNDEF:0:9}" = "_savegpr_" ]; then
+ OK=1
+ fi
+ if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then
+ OK=1
+ fi
+
if [ $OK -eq 0 ]; then
ERROR=1
echo "Error: External symbol '$UNDEF' referenced" \
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index faeb8f2..da7c058 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -87,6 +87,7 @@
#ifdef CONFIG_ALTIVEC
elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *)(((unsigned long)sc->vmx_reserve + 15) & ~0xful);
#endif
+ unsigned long msr = regs->msr;
long err = 0;
flush_fp_to_thread(current);
@@ -102,7 +103,7 @@
/* set MSR_VEC in the MSR value in the frame to indicate that sc->v_reg)
* contains valid data.
*/
- regs->msr |= MSR_VEC;
+ msr |= MSR_VEC;
}
/* We always copy to/from vrsave, it's 0 if we don't have or don't
* use altivec.
@@ -114,6 +115,7 @@
err |= __put_user(&sc->gp_regs, &sc->regs);
WARN_ON(!FULL_REGS(regs));
err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
+ err |= __put_user(msr, &sc->gp_regs[PT_MSR]);
err |= __copy_to_user(&sc->fp_regs, ¤t->thread.fpr, FP_REGS_SIZE);
err |= __put_user(signr, &sc->signal);
err |= __put_user(handler, &sc->handler);
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index c21a626..ce245a8 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -142,7 +142,7 @@
printk("kpg: %p (c:%d,f:%08lx)", __va(page_to_pfn(pg) << PAGE_SHIFT),
page_count(pg),
pg->flags);
- if (upg/* && pg != upg*/) {
+ if (upg && !IS_ERR(upg) /* && pg != upg*/) {
printk(" upg: %p (c:%d,f:%08lx)", __va(page_to_pfn(upg)
<< PAGE_SHIFT),
page_count(upg),
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index f5d7a5e..75dff7c 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -116,8 +116,6 @@
struct tlbe *stlbe = &vcpu->arch.shadow_tlb[index];
struct page *page = vcpu->arch.shadow_pages[index];
- kunmap(vcpu->arch.shadow_pages[index]);
-
if (get_tlb_v(stlbe)) {
if (kvmppc_44x_tlbe_is_writable(stlbe))
kvm_release_page_dirty(page);
@@ -144,18 +142,19 @@
stlbe = &vcpu->arch.shadow_tlb[victim];
/* Get reference to new page. */
- down_write(¤t->mm->mmap_sem);
+ down_read(¤t->mm->mmap_sem);
new_page = gfn_to_page(vcpu->kvm, gfn);
if (is_error_page(new_page)) {
- printk(KERN_ERR "Couldn't get guest page!\n");
+ printk(KERN_ERR "Couldn't get guest page for gfn %lx!\n", gfn);
kvm_release_page_clean(new_page);
+ up_read(¤t->mm->mmap_sem);
return;
}
hpaddr = page_to_phys(new_page);
/* Drop reference to old page. */
kvmppc_44x_shadow_release(vcpu, victim);
- up_write(¤t->mm->mmap_sem);
+ up_read(¤t->mm->mmap_sem);
vcpu->arch.shadow_pages[victim] = new_page;
diff --git a/arch/powerpc/kvm/booke_guest.c b/arch/powerpc/kvm/booke_guest.c
index 712d89a..9c8ad85 100644
--- a/arch/powerpc/kvm/booke_guest.c
+++ b/arch/powerpc/kvm/booke_guest.c
@@ -227,39 +227,6 @@
}
}
-static int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu)
-{
- enum emulation_result er;
- int r;
-
- er = kvmppc_emulate_instruction(run, vcpu);
- switch (er) {
- case EMULATE_DONE:
- /* Future optimization: only reload non-volatiles if they were
- * actually modified. */
- r = RESUME_GUEST_NV;
- break;
- case EMULATE_DO_MMIO:
- run->exit_reason = KVM_EXIT_MMIO;
- /* We must reload nonvolatiles because "update" load/store
- * instructions modify register state. */
- /* Future optimization: only reload non-volatiles if they were
- * actually modified. */
- r = RESUME_HOST_NV;
- break;
- case EMULATE_FAIL:
- /* XXX Deliver Program interrupt to guest. */
- printk(KERN_EMERG "%s: emulation failed (%08x)\n", __func__,
- vcpu->arch.last_inst);
- r = RESUME_HOST;
- break;
- default:
- BUG();
- }
-
- return r;
-}
-
/**
* kvmppc_handle_exit
*
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index a03fe0c..0000974 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -246,6 +246,11 @@
case 31:
switch (get_xop(inst)) {
+ case 23: /* lwzx */
+ rt = get_rt(inst);
+ emulated = kvmppc_handle_load(run, vcpu, rt, 4, 1);
+ break;
+
case 83: /* mfmsr */
rt = get_rt(inst);
vcpu->arch.gpr[rt] = vcpu->arch.msr;
@@ -267,6 +272,13 @@
kvmppc_set_msr(vcpu, vcpu->arch.gpr[rs]);
break;
+ case 151: /* stwx */
+ rs = get_rs(inst);
+ emulated = kvmppc_handle_store(run, vcpu,
+ vcpu->arch.gpr[rs],
+ 4, 1);
+ break;
+
case 163: /* wrteei */
vcpu->arch.msr = (vcpu->arch.msr & ~MSR_EE)
| (inst & MSR_EE);
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index c71d37d..e522b06 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -9,7 +9,7 @@
ifeq ($(CONFIG_PPC_MERGE),y)
obj-y := string.o alloc.o \
checksum_$(CONFIG_WORD_SIZE).o
-obj-$(CONFIG_PPC32) += div64.o copy_32.o
+obj-$(CONFIG_PPC32) += div64.o copy_32.o crtsavres.o
obj-$(CONFIG_HAS_IOMEM) += devres.o
endif
diff --git a/arch/powerpc/lib/crtsavres.S b/arch/powerpc/lib/crtsavres.S
new file mode 100644
index 0000000..70a9cd8
--- /dev/null
+++ b/arch/powerpc/lib/crtsavres.S
@@ -0,0 +1,229 @@
+/*
+ * Special support for eabi and SVR4
+ *
+ * Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ * Written By Michael Meissner
+ *
+ * Based on gcc/config/rs6000/crtsavres.asm from gcc
+ *
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * In addition to the permissions in the GNU General Public License, the
+ * Free Software Foundation gives you unlimited permission to link the
+ * compiled version of this file with other programs, and to distribute
+ * those programs without any restriction coming from the use of this
+ * file. (The General Public License restrictions do apply in other
+ * respects; for example, they cover modification of the file, and
+ * distribution when not linked into another program.)
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ * As a special exception, if you link this library with files
+ * compiled with GCC to produce an executable, this does not cause
+ * the resulting executable to be covered by the GNU General Public License.
+ * This exception does not however invalidate any other reasons why
+ * the executable file might be covered by the GNU General Public License.
+ */
+
+#include <asm/ppc_asm.h>
+
+ .file "crtsavres.S"
+ .section ".text"
+
+#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+
+/* Routines for saving integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer save area. */
+
+_GLOBAL(_savegpr_14)
+_GLOBAL(_save32gpr_14)
+ stw 14,-72(11) /* save gp registers */
+_GLOBAL(_savegpr_15)
+_GLOBAL(_save32gpr_15)
+ stw 15,-68(11)
+_GLOBAL(_savegpr_16)
+_GLOBAL(_save32gpr_16)
+ stw 16,-64(11)
+_GLOBAL(_savegpr_17)
+_GLOBAL(_save32gpr_17)
+ stw 17,-60(11)
+_GLOBAL(_savegpr_18)
+_GLOBAL(_save32gpr_18)
+ stw 18,-56(11)
+_GLOBAL(_savegpr_19)
+_GLOBAL(_save32gpr_19)
+ stw 19,-52(11)
+_GLOBAL(_savegpr_20)
+_GLOBAL(_save32gpr_20)
+ stw 20,-48(11)
+_GLOBAL(_savegpr_21)
+_GLOBAL(_save32gpr_21)
+ stw 21,-44(11)
+_GLOBAL(_savegpr_22)
+_GLOBAL(_save32gpr_22)
+ stw 22,-40(11)
+_GLOBAL(_savegpr_23)
+_GLOBAL(_save32gpr_23)
+ stw 23,-36(11)
+_GLOBAL(_savegpr_24)
+_GLOBAL(_save32gpr_24)
+ stw 24,-32(11)
+_GLOBAL(_savegpr_25)
+_GLOBAL(_save32gpr_25)
+ stw 25,-28(11)
+_GLOBAL(_savegpr_26)
+_GLOBAL(_save32gpr_26)
+ stw 26,-24(11)
+_GLOBAL(_savegpr_27)
+_GLOBAL(_save32gpr_27)
+ stw 27,-20(11)
+_GLOBAL(_savegpr_28)
+_GLOBAL(_save32gpr_28)
+ stw 28,-16(11)
+_GLOBAL(_savegpr_29)
+_GLOBAL(_save32gpr_29)
+ stw 29,-12(11)
+_GLOBAL(_savegpr_30)
+_GLOBAL(_save32gpr_30)
+ stw 30,-8(11)
+_GLOBAL(_savegpr_31)
+_GLOBAL(_save32gpr_31)
+ stw 31,-4(11)
+ blr
+
+/* Routines for restoring integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area. */
+
+_GLOBAL(_restgpr_14)
+_GLOBAL(_rest32gpr_14)
+ lwz 14,-72(11) /* restore gp registers */
+_GLOBAL(_restgpr_15)
+_GLOBAL(_rest32gpr_15)
+ lwz 15,-68(11)
+_GLOBAL(_restgpr_16)
+_GLOBAL(_rest32gpr_16)
+ lwz 16,-64(11)
+_GLOBAL(_restgpr_17)
+_GLOBAL(_rest32gpr_17)
+ lwz 17,-60(11)
+_GLOBAL(_restgpr_18)
+_GLOBAL(_rest32gpr_18)
+ lwz 18,-56(11)
+_GLOBAL(_restgpr_19)
+_GLOBAL(_rest32gpr_19)
+ lwz 19,-52(11)
+_GLOBAL(_restgpr_20)
+_GLOBAL(_rest32gpr_20)
+ lwz 20,-48(11)
+_GLOBAL(_restgpr_21)
+_GLOBAL(_rest32gpr_21)
+ lwz 21,-44(11)
+_GLOBAL(_restgpr_22)
+_GLOBAL(_rest32gpr_22)
+ lwz 22,-40(11)
+_GLOBAL(_restgpr_23)
+_GLOBAL(_rest32gpr_23)
+ lwz 23,-36(11)
+_GLOBAL(_restgpr_24)
+_GLOBAL(_rest32gpr_24)
+ lwz 24,-32(11)
+_GLOBAL(_restgpr_25)
+_GLOBAL(_rest32gpr_25)
+ lwz 25,-28(11)
+_GLOBAL(_restgpr_26)
+_GLOBAL(_rest32gpr_26)
+ lwz 26,-24(11)
+_GLOBAL(_restgpr_27)
+_GLOBAL(_rest32gpr_27)
+ lwz 27,-20(11)
+_GLOBAL(_restgpr_28)
+_GLOBAL(_rest32gpr_28)
+ lwz 28,-16(11)
+_GLOBAL(_restgpr_29)
+_GLOBAL(_rest32gpr_29)
+ lwz 29,-12(11)
+_GLOBAL(_restgpr_30)
+_GLOBAL(_rest32gpr_30)
+ lwz 30,-8(11)
+_GLOBAL(_restgpr_31)
+_GLOBAL(_rest32gpr_31)
+ lwz 31,-4(11)
+ blr
+
+/* Routines for restoring integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area. */
+
+_GLOBAL(_restgpr_14_x)
+_GLOBAL(_rest32gpr_14_x)
+ lwz 14,-72(11) /* restore gp registers */
+_GLOBAL(_restgpr_15_x)
+_GLOBAL(_rest32gpr_15_x)
+ lwz 15,-68(11)
+_GLOBAL(_restgpr_16_x)
+_GLOBAL(_rest32gpr_16_x)
+ lwz 16,-64(11)
+_GLOBAL(_restgpr_17_x)
+_GLOBAL(_rest32gpr_17_x)
+ lwz 17,-60(11)
+_GLOBAL(_restgpr_18_x)
+_GLOBAL(_rest32gpr_18_x)
+ lwz 18,-56(11)
+_GLOBAL(_restgpr_19_x)
+_GLOBAL(_rest32gpr_19_x)
+ lwz 19,-52(11)
+_GLOBAL(_restgpr_20_x)
+_GLOBAL(_rest32gpr_20_x)
+ lwz 20,-48(11)
+_GLOBAL(_restgpr_21_x)
+_GLOBAL(_rest32gpr_21_x)
+ lwz 21,-44(11)
+_GLOBAL(_restgpr_22_x)
+_GLOBAL(_rest32gpr_22_x)
+ lwz 22,-40(11)
+_GLOBAL(_restgpr_23_x)
+_GLOBAL(_rest32gpr_23_x)
+ lwz 23,-36(11)
+_GLOBAL(_restgpr_24_x)
+_GLOBAL(_rest32gpr_24_x)
+ lwz 24,-32(11)
+_GLOBAL(_restgpr_25_x)
+_GLOBAL(_rest32gpr_25_x)
+ lwz 25,-28(11)
+_GLOBAL(_restgpr_26_x)
+_GLOBAL(_rest32gpr_26_x)
+ lwz 26,-24(11)
+_GLOBAL(_restgpr_27_x)
+_GLOBAL(_rest32gpr_27_x)
+ lwz 27,-20(11)
+_GLOBAL(_restgpr_28_x)
+_GLOBAL(_rest32gpr_28_x)
+ lwz 28,-16(11)
+_GLOBAL(_restgpr_29_x)
+_GLOBAL(_rest32gpr_29_x)
+ lwz 29,-12(11)
+_GLOBAL(_restgpr_30_x)
+_GLOBAL(_rest32gpr_30_x)
+ lwz 30,-8(11)
+_GLOBAL(_restgpr_31_x)
+_GLOBAL(_rest32gpr_31_x)
+ lwz 0,4(11)
+ lwz 31,-4(11)
+ mtlr 0
+ mr 1,11
+ blr
+#endif
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index 21d2484..70f4c83 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -568,6 +568,10 @@
ld r7,STK_PARM(r9)(r1) /* ssize */
ld r8,STK_PARM(r8)(r1) /* local */
bl .flush_hash_page
+ /* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */
+ lis r0,_PAGE_HPTE_SUB@h
+ ori r0,r0,_PAGE_HPTE_SUB@l
+ andc r30,r30,r0
b htab_insert_pte
htab_bail_ok:
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index f67e118..51f82d8 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -151,6 +151,7 @@
return ret;
}
#endif /* CONFIG_MEMORY_HOTREMOVE */
+#endif /* CONFIG_MEMORY_HOTPLUG */
/*
* walk_memory_resource() needs to make sure there is no holes in a given
@@ -184,8 +185,6 @@
}
EXPORT_SYMBOL_GPL(walk_memory_resource);
-#endif /* CONFIG_MEMORY_HOTPLUG */
-
void show_mem(void)
{
unsigned long total = 0, reserved = 0;
diff --git a/arch/powerpc/platforms/52xx/lite5200_pm.c b/arch/powerpc/platforms/52xx/lite5200_pm.c
index 41c7fd9..fe92e65 100644
--- a/arch/powerpc/platforms/52xx/lite5200_pm.c
+++ b/arch/powerpc/platforms/52xx/lite5200_pm.c
@@ -14,6 +14,7 @@
static struct mpc52xx_xlb __iomem *xlb;
static struct mpc52xx_gpio __iomem *gps;
static struct mpc52xx_gpio_wkup __iomem *gpw;
+static void __iomem *pci;
static void __iomem *sram;
static const int sram_size = 0x4000; /* 16 kBytes */
static void __iomem *mbar;
@@ -50,6 +51,8 @@
{ .type = "builtin", .compatible = "mpc5200", }, /* efika */
{}
};
+ u64 regaddr64 = 0;
+ const u32 *regaddr_p;
/* deep sleep? let mpc52xx code handle that */
if (lite5200_pm_target_state == PM_SUSPEND_STANDBY)
@@ -60,8 +63,12 @@
/* map registers */
np = of_find_matching_node(NULL, immr_ids);
- mbar = of_iomap(np, 0);
+ regaddr_p = of_get_address(np, 0, NULL, NULL);
+ if (regaddr_p)
+ regaddr64 = of_translate_address(np, regaddr_p);
of_node_put(np);
+
+ mbar = ioremap((u32) regaddr64, 0xC000);
if (!mbar) {
printk(KERN_ERR "%s:%i Error mapping registers\n", __func__, __LINE__);
return -ENOSYS;
@@ -71,6 +78,7 @@
pic = mbar + 0x500;
gps = mbar + 0xb00;
gpw = mbar + 0xc00;
+ pci = mbar + 0xd00;
bes = mbar + 0x1200;
xlb = mbar + 0x1f00;
sram = mbar + 0x8000;
@@ -85,6 +93,7 @@
static struct mpc52xx_xlb sxlb;
static struct mpc52xx_gpio sgps;
static struct mpc52xx_gpio_wkup sgpw;
+static char spci[0x200];
static void lite5200_save_regs(void)
{
@@ -94,6 +103,7 @@
_memcpy_fromio(&sxlb, xlb, sizeof(*xlb));
_memcpy_fromio(&sgps, gps, sizeof(*gps));
_memcpy_fromio(&sgpw, gpw, sizeof(*gpw));
+ _memcpy_fromio(spci, pci, 0x200);
_memcpy_fromio(saved_sram, sram, sram_size);
}
@@ -103,6 +113,8 @@
int i;
_memcpy_toio(sram, saved_sram, sram_size);
+ /* PCI Configuration */
+ _memcpy_toio(pci, spci, 0x200);
/*
* GPIOs. Interrupt Master Enable has higher address then other
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
index 48da5df..8a455eb 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
@@ -100,7 +100,7 @@
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct mpc52xx_gpiochip *chip = container_of(mm_gc,
struct mpc52xx_gpiochip, mmchip);
- struct mpc52xx_gpio_wkup *regs = mm_gc->regs;
+ struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
unsigned long flags;
spin_lock_irqsave(&gpio_lock, flags);
@@ -122,7 +122,7 @@
mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpio_wkup *regs = mm_gc->regs;
+ struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
struct mpc52xx_gpiochip *chip = container_of(mm_gc,
struct mpc52xx_gpiochip, mmchip);
unsigned long flags;
@@ -150,7 +150,7 @@
const struct of_device_id *match)
{
struct mpc52xx_gpiochip *chip;
- struct mpc52xx_gpio_wkup *regs;
+ struct mpc52xx_gpio_wkup __iomem *regs;
struct of_gpio_chip *ofchip;
int ret;
@@ -260,7 +260,7 @@
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct mpc52xx_gpiochip *chip = container_of(mm_gc,
struct mpc52xx_gpiochip, mmchip);
- struct mpc52xx_gpio *regs = mm_gc->regs;
+ struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
unsigned long flags;
spin_lock_irqsave(&gpio_lock, flags);
@@ -284,7 +284,7 @@
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct mpc52xx_gpiochip *chip = container_of(mm_gc,
struct mpc52xx_gpiochip, mmchip);
- struct mpc52xx_gpio *regs = mm_gc->regs;
+ struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
unsigned long flags;
spin_lock_irqsave(&gpio_lock, flags);
@@ -312,7 +312,7 @@
{
struct mpc52xx_gpiochip *chip;
struct of_gpio_chip *ofchip;
- struct mpc52xx_gpio *regs;
+ struct mpc52xx_gpio __iomem *regs;
int ret;
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
@@ -387,7 +387,7 @@
static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpt *regs = mm_gc->regs;
+ struct mpc52xx_gpt __iomem *regs = mm_gc->regs;
out_be32(®s->mode, 0x04);
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 7ff29d5..ecbe580 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -34,6 +34,7 @@
bool "Freescale MPC85xx MDS"
select DEFAULT_UIMAGE
select QUICC_ENGINE
+ select PHYLIB
help
This option enables support for the MPC85xx MDS board
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 31da84c..0e04f8f 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -217,7 +217,7 @@
static void scc_pciex_ins##name(unsigned long p, void *b, unsigned long c) \
{ \
struct iowa_bus *bus = iowa_pio_find_bus(p); \
- u##size *dst = b; \
+ __le##size *dst = b; \
for (; c != 0; c--, dst++) \
*dst = cpu_to_le##size(__scc_pciex_in##name(bus->phb, p)); \
scc_pciex_io_flush(bus); \
@@ -231,10 +231,11 @@
unsigned long c) \
{ \
struct iowa_bus *bus = iowa_pio_find_bus(p); \
- const u##size *src = b; \
+ const __le##size *src = b; \
for (; c != 0; c--, src++) \
__scc_pciex_out##name(bus->phb, le##size##_to_cpu(*src), p); \
}
+#define __le8 u8
#define cpu_to_le8(x) (x)
#define le8_to_cpu(x) (x)
PCIEX_PIO_FUNC(8, b)
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 70c6601..78f905b 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -219,15 +219,25 @@
extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX
static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
{
+ int ret;
+
pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea);
- /* Handle kernel space hash faults immediately.
- User hash faults need to be deferred to process context. */
- if ((dsisr & MFC_DSISR_PTE_NOT_FOUND)
- && REGION_ID(ea) != USER_REGION_ID
- && hash_page(ea, _PAGE_PRESENT, 0x300) == 0) {
- spu_restart_dma(spu);
- return 0;
+ /*
+ * Handle kernel space hash faults immediately. User hash
+ * faults need to be deferred to process context.
+ */
+ if ((dsisr & MFC_DSISR_PTE_NOT_FOUND) &&
+ (REGION_ID(ea) != USER_REGION_ID)) {
+
+ spin_unlock(&spu->register_lock);
+ ret = hash_page(ea, _PAGE_PRESENT, 0x300);
+ spin_lock(&spu->register_lock);
+
+ if (!ret) {
+ spu_restart_dma(spu);
+ return 0;
+ }
}
spu->class_1_dar = ea;
@@ -324,17 +334,13 @@
stat = spu_int_stat_get(spu, 0) & mask;
spu->class_0_pending |= stat;
- spu->class_0_dsisr = spu_mfc_dsisr_get(spu);
spu->class_0_dar = spu_mfc_dar_get(spu);
- spin_unlock(&spu->register_lock);
-
spu->stop_callback(spu, 0);
-
spu->class_0_pending = 0;
- spu->class_0_dsisr = 0;
spu->class_0_dar = 0;
spu_int_stat_clear(spu, 0, stat);
+ spin_unlock(&spu->register_lock);
return IRQ_HANDLED;
}
@@ -357,13 +363,12 @@
spu_mfc_dsisr_set(spu, 0ul);
spu_int_stat_clear(spu, 1, stat);
- if (stat & CLASS1_SEGMENT_FAULT_INTR)
- __spu_trap_data_seg(spu, dar);
-
- spin_unlock(&spu->register_lock);
pr_debug("%s: %lx %lx %lx %lx\n", __func__, mask, stat,
dar, dsisr);
+ if (stat & CLASS1_SEGMENT_FAULT_INTR)
+ __spu_trap_data_seg(spu, dar);
+
if (stat & CLASS1_STORAGE_FAULT_INTR)
__spu_trap_data_map(spu, dar, dsisr);
@@ -376,6 +381,8 @@
spu->class_1_dsisr = 0;
spu->class_1_dar = 0;
+ spin_unlock(&spu->register_lock);
+
return stat ? IRQ_HANDLED : IRQ_NONE;
}
@@ -394,14 +401,12 @@
mask = spu_int_mask_get(spu, 2);
/* ignore interrupts we're not waiting for */
stat &= mask;
-
/* mailbox interrupts are level triggered. mask them now before
* acknowledging */
if (stat & mailbox_intrs)
spu_int_mask_and(spu, 2, ~(stat & mailbox_intrs));
/* acknowledge all interrupts before the callbacks */
spu_int_stat_clear(spu, 2, stat);
- spin_unlock(&spu->register_lock);
pr_debug("class 2 interrupt %d, %lx, %lx\n", irq, stat, mask);
@@ -421,6 +426,9 @@
spu->wbox_callback(spu);
spu->stats.class2_intr++;
+
+ spin_unlock(&spu->register_lock);
+
return stat ? IRQ_HANDLED : IRQ_NONE;
}
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index b7493b8..f7edba6 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -27,7 +27,6 @@
switch(irq) {
case 0 :
ctx->csa.class_0_pending = spu->class_0_pending;
- ctx->csa.class_0_dsisr = spu->class_0_dsisr;
ctx->csa.class_0_dar = spu->class_0_dar;
break;
case 1 :
@@ -51,18 +50,22 @@
u64 dsisr;
u32 stopped;
- *stat = ctx->ops->status_read(ctx);
-
- if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags))
- return 1;
-
stopped = SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP |
SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP;
- if (!(*stat & SPU_STATUS_RUNNING) && (*stat & stopped))
- return 1;
- dsisr = ctx->csa.class_0_dsisr;
- if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED))
+top:
+ *stat = ctx->ops->status_read(ctx);
+ if (*stat & stopped) {
+ /*
+ * If the spu hasn't finished stopping, we need to
+ * re-read the register to get the stopped value.
+ */
+ if (*stat & SPU_STATUS_RUNNING)
+ goto top;
+ return 1;
+ }
+
+ if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags))
return 1;
dsisr = ctx->csa.class_1_dsisr;
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 745dd51..e929e70 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -230,19 +230,23 @@
ctx->stats.slb_flt_base = spu->stats.slb_flt;
ctx->stats.class2_intr_base = spu->stats.class2_intr;
+ spu_associate_mm(spu, ctx->owner);
+
+ spin_lock_irq(&spu->register_lock);
spu->ctx = ctx;
spu->flags = 0;
ctx->spu = spu;
ctx->ops = &spu_hw_ops;
spu->pid = current->pid;
spu->tgid = current->tgid;
- spu_associate_mm(spu, ctx->owner);
spu->ibox_callback = spufs_ibox_callback;
spu->wbox_callback = spufs_wbox_callback;
spu->stop_callback = spufs_stop_callback;
spu->mfc_callback = spufs_mfc_callback;
- mb();
+ spin_unlock_irq(&spu->register_lock);
+
spu_unmap_mappings(ctx);
+
spu_switch_log_notify(spu, ctx, SWITCH_LOG_START, 0);
spu_restore(&ctx->csa, spu);
spu->timestamp = jiffies;
@@ -403,6 +407,8 @@
*/
static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
{
+ u32 status;
+
spu_context_trace(spu_unbind_context__enter, ctx, spu);
spuctx_switch_state(ctx, SPU_UTIL_SYSTEM);
@@ -423,18 +429,22 @@
spu_unmap_mappings(ctx);
spu_save(&ctx->csa, spu);
spu_switch_log_notify(spu, ctx, SWITCH_LOG_STOP, 0);
+
+ spin_lock_irq(&spu->register_lock);
spu->timestamp = jiffies;
ctx->state = SPU_STATE_SAVED;
spu->ibox_callback = NULL;
spu->wbox_callback = NULL;
spu->stop_callback = NULL;
spu->mfc_callback = NULL;
- spu_associate_mm(spu, NULL);
spu->pid = 0;
spu->tgid = 0;
ctx->ops = &spu_backing_ops;
spu->flags = 0;
spu->ctx = NULL;
+ spin_unlock_irq(&spu->register_lock);
+
+ spu_associate_mm(spu, NULL);
ctx->stats.slb_flt +=
(spu->stats.slb_flt - ctx->stats.slb_flt_base);
@@ -444,6 +454,9 @@
/* This maps the underlying spu state to idle */
spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED);
ctx->spu = NULL;
+
+ if (spu_stopped(ctx, &status))
+ wake_up_all(&ctx->stop_wq);
}
/**
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 68ea5ee..8c1ca47 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -42,17 +42,20 @@
}
#ifdef DEBUG
-static void print_device_node_tree (struct pci_dn *pdn, int dent)
+static void print_device_node_tree(struct pci_dn *pdn, int dent)
{
int i;
- if (!pdn) return;
- for (i=0;i<dent; i++)
+ struct device_node *pc;
+
+ if (!pdn)
+ return;
+ for (i = 0; i < dent; i++)
printk(" ");
printk("dn=%s mode=%x \tcfg_addr=%x pe_addr=%x \tfull=%s\n",
pdn->node->name, pdn->eeh_mode, pdn->eeh_config_addr,
pdn->eeh_pe_config_addr, pdn->node->full_name);
dent += 3;
- struct device_node *pc = pdn->node->child;
+ pc = pdn->node->child;
while (pc) {
print_device_node_tree(PCI_DN(pc), dent);
pc = pc->sibling;
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index f68903e..42f7e38 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -131,8 +131,10 @@
return -ENODEV;
nbytes_p = of_get_property(nvram, "#bytes", &proplen);
- if (nbytes_p == NULL || proplen != sizeof(unsigned int))
+ if (nbytes_p == NULL || proplen != sizeof(unsigned int)) {
+ of_node_put(nvram);
return -EIO;
+ }
nvram_size = *nbytes_p;
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 3a7054e..019657c11 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -432,7 +432,7 @@
{"dallas,ds1339", "ds1339"},
{"dallas,ds1340", "ds1340"},
{"stm,m41t00", "m41t00"},
- {"dallas,ds1374", "rtc-ds1374"},
+ {"dallas,ds1374", "ds1374"},
};
static int __init of_find_i2c_driver(struct device_node *node,
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 1702de9..bfcf70e 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2844,7 +2844,6 @@
DUMP_FIELD(spu, "0x%lx", flags);
DUMP_FIELD(spu, "%d", class_0_pending);
DUMP_FIELD(spu, "0x%lx", class_0_dar);
- DUMP_FIELD(spu, "0x%lx", class_0_dsisr);
DUMP_FIELD(spu, "0x%lx", class_1_dar);
DUMP_FIELD(spu, "0x%lx", class_1_dsisr);
DUMP_FIELD(spu, "0x%lx", irqs[0]);
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 602c268..5d529bc 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -60,8 +60,10 @@
long long __ashldi3(long long, int);
long long __lshrdi3(long long, int);
+EXPORT_SYMBOL(empty_zero_page);
EXPORT_SYMBOL(clear_pages);
EXPORT_SYMBOL(clear_user_page);
+EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(transfer_to_handler);
EXPORT_SYMBOL(do_IRQ);
EXPORT_SYMBOL(machine_check_exception);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 93acb3c..107e492 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -304,6 +304,7 @@
def_bool y
select SPARSEMEM_VMEMMAP_ENABLE
select SPARSEMEM_VMEMMAP
+ select SPARSEMEM_STATIC if !64BIT
config ARCH_SPARSEMEM_DEFAULT
def_bool y
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 42b1d12..5d4fa4b 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -711,7 +711,7 @@
memset(sf, 0, sizeof(struct stack_frame));
sf->gprs[9] = (unsigned long) sf;
cpu_lowcore->save_area[15] = (unsigned long) sf;
- __ctl_store(cpu_lowcore->cregs_save_area[0], 0, 15);
+ __ctl_store(cpu_lowcore->cregs_save_area, 0, 15);
asm volatile(
" stam 0,15,0(%0)"
: : "a" (&cpu_lowcore->access_regs_save_area) : "memory");
diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c
index f639a15..a0775e1 100644
--- a/arch/s390/kvm/diag.c
+++ b/arch/s390/kvm/diag.c
@@ -20,7 +20,7 @@
VCPU_EVENT(vcpu, 5, "%s", "diag time slice end");
vcpu->stat.diagnose_44++;
vcpu_put(vcpu);
- schedule();
+ yield();
vcpu_load(vcpu);
return 0;
}
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index fcd1ed8..84a7fed 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -339,6 +339,11 @@
if (kvm_cpu_has_interrupt(vcpu))
return 0;
+ __set_cpu_idle(vcpu);
+ spin_lock_bh(&vcpu->arch.local_int.lock);
+ vcpu->arch.local_int.timer_due = 0;
+ spin_unlock_bh(&vcpu->arch.local_int.lock);
+
if (psw_interrupts_disabled(vcpu)) {
VCPU_EVENT(vcpu, 3, "%s", "disabled wait");
__unset_cpu_idle(vcpu);
@@ -366,8 +371,6 @@
no_timer:
spin_lock_bh(&vcpu->arch.local_int.float_int->lock);
spin_lock_bh(&vcpu->arch.local_int.lock);
- __set_cpu_idle(vcpu);
- vcpu->arch.local_int.timer_due = 0;
add_wait_queue(&vcpu->arch.local_int.wq, &wait);
while (list_empty(&vcpu->arch.local_int.list) &&
list_empty(&vcpu->arch.local_int.float_int->list) &&
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 0ac36a6..6558b09 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -423,6 +423,8 @@
return -EINVAL; /* not implemented yet */
}
+extern void s390_handle_mcck(void);
+
static void __vcpu_run(struct kvm_vcpu *vcpu)
{
memcpy(&vcpu->arch.sie_block->gg14, &vcpu->arch.guest_gprs[14], 16);
@@ -430,13 +432,21 @@
if (need_resched())
schedule();
+ if (test_thread_flag(TIF_MCCK_PENDING))
+ s390_handle_mcck();
+
+ kvm_s390_deliver_pending_interrupts(vcpu);
+
vcpu->arch.sie_block->icptcode = 0;
local_irq_disable();
kvm_guest_enter();
local_irq_enable();
VCPU_EVENT(vcpu, 6, "entering sie flags %x",
atomic_read(&vcpu->arch.sie_block->cpuflags));
- sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs);
+ if (sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs)) {
+ VCPU_EVENT(vcpu, 3, "%s", "fault in sie instruction");
+ kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
+ }
VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
vcpu->arch.sie_block->icptcode);
local_irq_disable();
@@ -475,7 +485,6 @@
might_sleep();
do {
- kvm_s390_deliver_pending_interrupts(vcpu);
__vcpu_run(vcpu);
rc = kvm_handle_sie_intercept(vcpu);
} while (!signal_pending(current) && !rc);
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 5c1aea9..3d98ba8 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -254,36 +254,46 @@
int s390_enable_sie(void)
{
struct task_struct *tsk = current;
- struct mm_struct *mm;
- int rc;
+ struct mm_struct *mm, *old_mm;
- task_lock(tsk);
-
- rc = 0;
+ /* Do we have pgstes? if yes, we are done */
if (tsk->mm->context.pgstes)
- goto unlock;
+ return 0;
- rc = -EINVAL;
+ /* lets check if we are allowed to replace the mm */
+ task_lock(tsk);
if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
- tsk->mm != tsk->active_mm || tsk->mm->ioctx_list)
- goto unlock;
+ tsk->mm != tsk->active_mm || tsk->mm->ioctx_list) {
+ task_unlock(tsk);
+ return -EINVAL;
+ }
+ task_unlock(tsk);
- tsk->mm->context.pgstes = 1; /* dirty little tricks .. */
+ /* we copy the mm with pgstes enabled */
+ tsk->mm->context.pgstes = 1;
mm = dup_mm(tsk);
tsk->mm->context.pgstes = 0;
-
- rc = -ENOMEM;
if (!mm)
- goto unlock;
- mmput(tsk->mm);
+ return -ENOMEM;
+
+ /* Now lets check again if somebody attached ptrace etc */
+ task_lock(tsk);
+ if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
+ tsk->mm != tsk->active_mm || tsk->mm->ioctx_list) {
+ mmput(mm);
+ task_unlock(tsk);
+ return -EINVAL;
+ }
+
+ /* ok, we are alone. No ptrace, no threads, etc. */
+ old_mm = tsk->mm;
tsk->mm = tsk->active_mm = mm;
preempt_disable();
update_mm(mm, tsk);
cpu_set(smp_processor_id(), mm->cpu_vm_mask);
preempt_enable();
- rc = 0;
-unlock:
task_unlock(tsk);
- return rc;
+ mmput(old_mm);
+ return 0;
}
EXPORT_SYMBOL_GPL(s390_enable_sie);
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index f591188..e4868bf 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -236,7 +236,7 @@
{
struct memory_segment *tmp;
- if (seg->start + seg->size >= VMEM_MAX_PHYS ||
+ if (seg->start + seg->size > VMEM_MAX_PHYS ||
seg->start + seg->size < seg->start)
return -ERANGE;
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 0d2ef1e..0f45498 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -81,7 +81,7 @@
config 4KSTACKS
bool "Use 4Kb for kernel stacks instead of 8Kb"
- depends on DEBUG_KERNEL
+ depends on DEBUG_KERNEL && (MMU || BROKEN)
help
If you say Y here the kernel will use a 4Kb stacksize for the
kernel stack attached to each process/thread. This facilitates
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 8050b03..fb7b1b1 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -41,6 +41,8 @@
cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml
+cflags-y += $(call cc-option,-mno-fdpic)
+
#
# -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that
# support it, while -Wa,-dsp by itself limits the range of usable opcodes
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
new file mode 100644
index 0000000..a0ebd43
--- /dev/null
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -0,0 +1,841 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc4
+# Tue Jun 3 13:02:42 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH2=y
+CONFIG_CPU_SH2A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+CONFIG_CPU_SUBTYPE_SH7203=y
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_PAGE_OFFSET=0x00000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_FPU=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_CMT=y
+# CONFIG_SH_MTU2 is not set
+CONFIG_SH_TIMER_IRQ=142
+CONFIG_SH_PCLK_FREQ=16670800
+CONFIG_SH_CLK_MD=0
+# CONFIG_TICK_ONESHOT is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
+
+#
+# DMA support
+#
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x20000000
+CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=4
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_BOOTMEM=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_IRQSTACKS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 0d0cda90..6b34baa 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,9 +1,10 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Sep 13 16:40:16 2007
+# Linux kernel version: 2.6.26-rc4
+# Tue Jun 3 20:27:08 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -18,6 +19,7 @@
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -25,47 +27,82 @@
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_DEVICE=y
+# CONFIG_GROUP_SCHED is not set
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MM_OWNER=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
@@ -81,6 +118,7 @@
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_CLASSIC_RCU is not set
#
# System type
@@ -88,7 +126,10 @@
CONFIG_CPU_SH2=y
CONFIG_CPU_SH2A=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
CONFIG_CPU_SUBTYPE_SH7206=y
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -97,6 +138,7 @@
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -105,14 +147,17 @@
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
@@ -121,23 +166,25 @@
CONFIG_PAGE_OFFSET=0x00000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_MAX_ACTIVE_REGIONS=1
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -183,13 +230,16 @@
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_SH_CPU_FREQ is not set
+CONFIG_SH_CPU_FREQ=y
#
# DMA support
@@ -213,11 +263,15 @@
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
-# CONFIG_KEXEC is not set
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
-CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+CONFIG_GUSA=y
#
# Boot options
@@ -225,25 +279,25 @@
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC3,115200 earlyprintk=serial ignore_loglevel"
+CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
#
# Bus options
#
-# CONFIG_CF_ENABLER is not set
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCCARD is not set
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_SHARED_FLAT=y
+CONFIG_BINFMT_MISC=y
#
# Networking
@@ -253,14 +307,24 @@
#
# Networking options
#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
@@ -273,14 +337,13 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -297,10 +360,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -308,6 +367,7 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -329,8 +389,10 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -339,11 +401,9 @@
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -356,6 +416,7 @@
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -390,7 +451,6 @@
CONFIG_MTD_PHYSMAP_START=0x20000000
CONFIG_MTD_PHYSMAP_LEN=0x01000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_SOLUTIONENGINE is not set
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
@@ -418,13 +478,19 @@
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+CONFIG_EEPROM_93CX6=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -443,23 +509,30 @@
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -469,28 +542,7 @@
#
# Input device support
#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
#
# Hardware I/O ports
@@ -502,6 +554,7 @@
# Character devices
#
# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -520,106 +573,119 @@
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_SH=y
# CONFIG_UIO is not set
#
# File systems
#
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -642,10 +708,11 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
-# CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
@@ -658,18 +725,28 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
@@ -681,30 +758,20 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
@@ -712,7 +779,10 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
-CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
@@ -722,38 +792,123 @@
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_LIST=y
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe9800
-CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DEBUG_BOOTMEM is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
#
# Security options
#
# CONFIG_KEYS is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index de45c6a..79baa47 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -242,6 +242,7 @@
reg += 8;
}
}
+ }
#endif
/*
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index 566ce79..a0470f2 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -16,6 +16,21 @@
static struct plat_sci_port sci_platform_data[] = {
{
+ .mapbase = 0xffe00000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 80, 80, 80, 80 },
+ },{
+ .mapbase = 0xffe10000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 81, 81, 81, 81 },
+ },{
+ .mapbase = 0xffe20000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 82, 82, 82, 82 },
+ },{
.mapbase = 0xa4e30000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCI,
@@ -73,9 +88,35 @@
.resource = rtc_resources,
};
+static struct resource sh7723_usb_host_resources[] = {
+ [0] = {
+ .name = "r8a66597_hcd",
+ .start = 0xa4d80000,
+ .end = 0xa4d800ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 65,
+ .end = 65,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sh7723_usb_host_device = {
+ .name = "r8a66597_hcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = NULL, /* not use dma */
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(sh7723_usb_host_resources),
+ .resource = sh7723_usb_host_resources,
+};
+
static struct platform_device *sh7723_devices[] __initdata = {
&sci_device,
&rtc_device,
+ &sh7723_usb_host_device,
};
static int __init sh7723_devices_setup(void)
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index ae2b222..f189a55 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -291,8 +291,9 @@
};
static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors,
- NULL, NULL, irq_mask_registers, irq_prio_registers,
- irq_sense_registers);
+ NULL, irq_mask_registers, irq_prio_registers,
+ irq_sense_registers);
+
/* External interrupt pins in IRL mode */
static struct intc_vect irl_vectors[] __initdata = {
@@ -324,10 +325,10 @@
};
static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors,
- NULL, NULL, irl7654_mask_registers, NULL, NULL);
+ NULL, irl7654_mask_registers, NULL, NULL);
static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors,
- NULL, NULL, irl3210_mask_registers, NULL, NULL);
+ NULL, irl3210_mask_registers, NULL, NULL);
#define INTC_ICR0 0xffd00000
#define INTC_INTMSK0 0xffd00044
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
index b3d0a03..5482e65 100644
--- a/arch/sh/kernel/module.c
+++ b/arch/sh/kernel/module.c
@@ -30,6 +30,7 @@
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/kernel.h>
+#include <asm/unaligned.h>
void *module_alloc(unsigned long size)
{
@@ -56,34 +57,6 @@
return 0;
}
-#ifdef CONFIG_SUPERH32
-#define COPY_UNALIGNED_WORD(sw, tw, align) \
-{ \
- void *__s = &(sw), *__t = &(tw); \
- unsigned short *__s2 = __s, *__t2 = __t; \
- unsigned char *__s1 = __s, *__t1 = __t; \
- switch ((align)) \
- { \
- case 0: \
- *(unsigned long *) __t = *(unsigned long *) __s; \
- break; \
- case 2: \
- *__t2++ = *__s2++; \
- *__t2 = *__s2; \
- break; \
- default: \
- *__t1++ = *__s1++; \
- *__t1++ = *__s1++; \
- *__t1++ = *__s1++; \
- *__t1 = *__s1; \
- break; \
- } \
-}
-#else
-/* One thing SHmedia doesn't screw up! */
-#define COPY_UNALIGNED_WORD(sw, tw, align) { (tw) = (sw); }
-#endif
-
int apply_relocate_add(Elf32_Shdr *sechdrs,
const char *strtab,
unsigned int symindex,
@@ -96,7 +69,6 @@
Elf32_Addr relocation;
uint32_t *location;
uint32_t value;
- int align;
pr_debug("Applying relocate section %u to %u\n", relsec,
sechdrs[relsec].sh_info);
@@ -109,7 +81,6 @@
sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ ELF32_R_SYM(rel[i].r_info);
relocation = sym->st_value + rel[i].r_addend;
- align = (int)location & 3;
#ifdef CONFIG_SUPERH64
/* For text addresses, bit2 of the st_other field indicates
@@ -122,15 +93,15 @@
switch (ELF32_R_TYPE(rel[i].r_info)) {
case R_SH_DIR32:
- COPY_UNALIGNED_WORD (*location, value, align);
+ value = get_unaligned(location);
value += relocation;
- COPY_UNALIGNED_WORD (value, *location, align);
+ put_unaligned(value, location);
break;
case R_SH_REL32:
relocation = (relocation - (Elf32_Addr) location);
- COPY_UNALIGNED_WORD (*location, value, align);
+ value = get_unaligned(location);
value += relocation;
- COPY_UNALIGNED_WORD (value, *location, align);
+ put_unaligned(value, location);
break;
case R_SH_IMM_LOW16:
*location = (*location & ~0x3fffc00) |
diff --git a/arch/sparc/kernel/led.c b/arch/sparc/kernel/led.c
index 59e9344..adaaed4 100644
--- a/arch/sparc/kernel/led.c
+++ b/arch/sparc/kernel/led.c
@@ -2,6 +2,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/string.h>
#include <linux/jiffies.h>
#include <linux/timer.h>
@@ -45,21 +46,22 @@
add_timer(&led_blink_timer);
}
-static int led_read_proc(char *buf, char **start, off_t offset, int count,
- int *eof, void *data)
+static int led_proc_show(struct seq_file *m, void *v)
{
- int len = 0;
-
if (get_auxio() & AUXIO_LED)
- len = sprintf(buf, "on\n");
+ seq_puts(m, "on\n");
else
- len = sprintf(buf, "off\n");
-
- return len;
+ seq_puts(m, "off\n");
+ return 0;
}
-static int led_write_proc(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static int led_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, led_proc_show, NULL);
+}
+
+static ssize_t led_proc_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *ppos)
{
char *buf = NULL;
@@ -103,6 +105,15 @@
return count;
}
+static const struct file_operations led_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = led_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = led_proc_write,
+};
+
static struct proc_dir_entry *led;
#define LED_VERSION "0.1"
@@ -112,12 +123,9 @@
init_timer(&led_blink_timer);
led_blink_timer.function = led_blink;
- led = create_proc_entry("led", 0, NULL);
+ led = proc_create("led", 0, NULL, &led_proc_fops);
if (!led)
return -ENOMEM;
-
- led->read_proc = led_read_proc; /* reader function */
- led->write_proc = led_write_proc; /* writer function */
led->owner = THIS_MODULE;
printk(KERN_INFO
diff --git a/arch/um/Makefile b/arch/um/Makefile
index dbeab15..ca40397 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -77,7 +77,6 @@
KERNEL_DEFINES = $(strip -Derrno=kernel_errno -Dsigprocmask=kernel_sigprocmask \
-Dmktime=kernel_mktime $(ARCH_KERNEL_DEFINES))
KBUILD_CFLAGS += $(KERNEL_DEFINES)
-KBUILD_CFLAGS += $(call cc-option,-fno-unit-at-a-time,)
PHONY += linux
diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386
index 561e373..302cbe5 100644
--- a/arch/um/Makefile-i386
+++ b/arch/um/Makefile-i386
@@ -32,4 +32,11 @@
# an unresolved reference.
cflags-y += -ffreestanding
+# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
+# a lot more stack due to the lack of sharing of stacklots. Also, gcc
+# 4.3.0 needs -funit-at-a-time for extern inline functions.
+KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then \
+ echo $(call cc-option,-fno-unit-at-a-time); \
+ else echo $(call cc-option,-funit-at-a-time); fi ;)
+
KBUILD_CFLAGS += $(cflags-y)
diff --git a/arch/um/Makefile-x86_64 b/arch/um/Makefile-x86_64
index 8ed362f..a9cd7e7 100644
--- a/arch/um/Makefile-x86_64
+++ b/arch/um/Makefile-x86_64
@@ -21,3 +21,6 @@
LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib64
LINK-y += -m64
+
+# Do unit-at-a-time unconditionally on x86_64, following the host
+KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 44ad160..b58fb89 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -49,7 +49,6 @@
#include "irq_user.h"
#include "irq_kern.h"
#include "ubd_user.h"
-#include "kern_util.h"
#include "os.h"
#include "mem.h"
#include "mem_kern.h"
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index e2716ac..db5be46 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -299,6 +299,6 @@
extern int get_pty(void);
/* sys-$ARCH/task_size.c */
-extern unsigned long os_get_task_size(void);
+extern unsigned long os_get_top_address(void);
#endif
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 9db85b2..8d84250 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -274,7 +274,7 @@
if (have_root == 0)
add_arg(DEFAULT_COMMAND_LINE);
- host_task_size = os_get_task_size();
+ host_task_size = os_get_top_address();
/*
* TASK_SIZE needs to be PGDIR_SIZE aligned or else exit_mmap craps
* out
diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c
index 74ca7aa..30860b8 100644
--- a/arch/um/os-Linux/helper.c
+++ b/arch/um/os-Linux/helper.c
@@ -7,6 +7,7 @@
#include <unistd.h>
#include <errno.h>
#include <sched.h>
+#include <linux/limits.h>
#include <sys/socket.h>
#include <sys/wait.h>
#include "kern_constants.h"
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 6be028c..172ad8f 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -55,7 +55,7 @@
* Signals that are OK to receive in the stub - we'll just continue it.
* SIGWINCH will happen when UML is inside a detached screen.
*/
-#define STUB_SIG_MASK (1 << SIGVTALRM)
+#define STUB_SIG_MASK ((1 << SIGVTALRM) | (1 << SIGWINCH))
/* Signals that the stub will finish with - anything else is an error */
#define STUB_DONE_MASK (1 << SIGTRAP)
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index b4b36e0..183db26 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -121,8 +121,10 @@
{
int status, n, ret = 0;
- if (ptrace(PTRACE_CONT, pid, 0, 0) < 0)
- fatal_perror("stop_ptraced_child : ptrace failed");
+ if (ptrace(PTRACE_CONT, pid, 0, 0) < 0) {
+ perror("stop_ptraced_child : ptrace failed");
+ return -1;
+ }
CATCH_EINTR(n = waitpid(pid, &status, 0));
if (!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) {
int exit_with = WEXITSTATUS(status);
@@ -212,7 +214,7 @@
if (n < 0)
fatal_perror("check_sysemu : wait failed");
if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGTRAP))
- fatal("check_sysemu : expected SIGTRAP, got status = %d",
+ fatal("check_sysemu : expected SIGTRAP, got status = %d\n",
status);
if (ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
@@ -254,9 +256,11 @@
if (WIFSTOPPED(status) &&
(WSTOPSIG(status) == (SIGTRAP|0x80))) {
- if (!count)
- fatal("check_ptrace : SYSEMU_SINGLESTEP "
- "doesn't singlestep");
+ if (!count) {
+ non_fatal("check_ptrace : SYSEMU_SINGLESTEP "
+ "doesn't singlestep");
+ goto fail;
+ }
n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET,
os_getpid());
if (n < 0)
@@ -266,9 +270,12 @@
}
else if (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGTRAP))
count++;
- else
- fatal("check_ptrace : expected SIGTRAP or "
- "(SIGTRAP | 0x80), got status = %d", status);
+ else {
+ non_fatal("check_ptrace : expected SIGTRAP or "
+ "(SIGTRAP | 0x80), got status = %d\n",
+ status);
+ goto fail;
+ }
}
if (stop_ptraced_child(pid, 0, 0) < 0)
goto fail_stopped;
diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c
index b487cbe..229f7a5 100644
--- a/arch/um/os-Linux/sys-i386/registers.c
+++ b/arch/um/os-Linux/sys-i386/registers.c
@@ -6,7 +6,7 @@
#include <errno.h>
#include <sys/ptrace.h>
-#include <asm/user.h>
+#include <sys/user.h>
#include "kern_constants.h"
#include "longjmp.h"
#include "user.h"
@@ -76,7 +76,7 @@
void arch_init_registers(int pid)
{
- struct user_fxsr_struct fpx_regs;
+ struct user_fpxregs_struct fpx_regs;
int err;
err = ptrace(PTRACE_GETFPXREGS, pid, 0, &fpx_regs);
diff --git a/arch/um/os-Linux/sys-i386/task_size.c b/arch/um/os-Linux/sys-i386/task_size.c
index ccb49b0..be04c1e 100644
--- a/arch/um/os-Linux/sys-i386/task_size.c
+++ b/arch/um/os-Linux/sys-i386/task_size.c
@@ -63,7 +63,7 @@
return ok;
}
-unsigned long os_get_task_size(void)
+unsigned long os_get_top_address(void)
{
struct sigaction sa, old;
unsigned long bottom = 0;
@@ -76,9 +76,9 @@
* hosts, but shouldn't hurt otherwise.
*/
unsigned long top = 0xffffd000 >> UM_KERN_PAGE_SHIFT;
- unsigned long test;
+ unsigned long test, original;
- printf("Locating the top of the address space ... ");
+ printf("Locating the bottom of the address space ... ");
fflush(stdout);
/*
@@ -89,16 +89,31 @@
sigemptyset(&sa.sa_mask);
sa.sa_flags = SA_NODEFER;
if (sigaction(SIGSEGV, &sa, &old)) {
- perror("os_get_task_size");
+ perror("os_get_top_address");
exit(1);
}
- if (!page_ok(bottom)) {
- fprintf(stderr, "Address 0x%x no good?\n",
- bottom << UM_KERN_PAGE_SHIFT);
+ /* Manually scan the address space, bottom-up, until we find
+ * the first valid page (or run out of them).
+ */
+ for (bottom = 0; bottom < top; bottom++) {
+ if (page_ok(bottom))
+ break;
+ }
+
+ /* If we've got this far, we ran out of pages. */
+ if (bottom == top) {
+ fprintf(stderr, "Unable to determine bottom of address "
+ "space.\n");
exit(1);
}
+ printf("0x%x\n", bottom << UM_KERN_PAGE_SHIFT);
+ printf("Locating the top of the address space ... ");
+ fflush(stdout);
+
+ original = bottom;
+
/* This could happen with a 4G/4G split */
if (page_ok(top))
goto out;
@@ -114,7 +129,7 @@
out:
/* Restore the old SIGSEGV handling */
if (sigaction(SIGSEGV, &old, NULL)) {
- perror("os_get_task_size");
+ perror("os_get_top_address");
exit(1);
}
top <<= UM_KERN_PAGE_SHIFT;
diff --git a/arch/um/os-Linux/sys-x86_64/task_size.c b/arch/um/os-Linux/sys-x86_64/task_size.c
index fad6f57..26a0dd1 100644
--- a/arch/um/os-Linux/sys-x86_64/task_size.c
+++ b/arch/um/os-Linux/sys-x86_64/task_size.c
@@ -1,4 +1,4 @@
-unsigned long os_get_task_size(unsigned long shift)
+unsigned long os_get_top_address(unsigned long shift)
{
/* The old value of CONFIG_TOP_ADDR */
return 0x7fc0000000;
diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c
index bee98f4..dec5678 100644
--- a/arch/um/os-Linux/time.c
+++ b/arch/um/os-Linux/time.c
@@ -106,6 +106,10 @@
unsigned long long this_tick = os_nsecs();
int one_tick = UM_NSEC_PER_SEC / UM_HZ;
+ /* Protection against the host's time going backwards */
+ if ((last_tick != 0) && (this_tick < last_tick))
+ this_tick = last_tick;
+
if (last_tick == 0)
last_tick = this_tick - one_tick;
@@ -148,6 +152,9 @@
start_usecs = usec;
start_usecs -= skew / UM_NSEC_PER_USEC;
+ if (start_usecs < 0)
+ start_usecs = 0;
+
tv = ((struct timeval) { .tv_sec = start_usecs / UM_USEC_PER_SEC,
.tv_usec = start_usecs % UM_USEC_PER_SEC });
interval = ((struct itimerval) { { 0, usec }, tv });
diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/um/sys-x86_64/ksyms.c
index 6604673..1db2fce 100644
--- a/arch/um/sys-x86_64/ksyms.c
+++ b/arch/um/sys-x86_64/ksyms.c
@@ -3,5 +3,9 @@
#include <asm/checksum.h>
/*XXX: we need them because they would be exported by x86_64 */
+#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4
+EXPORT_SYMBOL(memcpy);
+#else
EXPORT_SYMBOL(__memcpy);
+#endif
EXPORT_SYMBOL(csum_partial);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index dcbec34..bf07b6f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -383,6 +383,7 @@
config KVM_CLOCK
bool "KVM paravirtualized clock"
select PARAVIRT
+ select PARAVIRT_CLOCK
depends on !(X86_VISWS || X86_VOYAGER)
help
Turning on this option will allow you to run a paravirtualized clock
@@ -410,6 +411,10 @@
over full virtualization. However, when run without a hypervisor
the kernel is theoretically slower and slightly larger.
+config PARAVIRT_CLOCK
+ bool
+ default n
+
endif
config MEMTEST_BOOTPARAM
@@ -961,8 +966,8 @@
number of nodes. This is only useful for debugging.
config NODES_SHIFT
- int "Max num nodes shift(1-15)"
- range 1 15 if X86_64
+ int "Max num nodes shift(1-9)"
+ range 1 9 if X86_64
default "6" if X86_64
default "4" if X86_NUMAQ
default "3"
@@ -1508,13 +1513,13 @@
config PCI_GODIRECT
bool "Direct"
-config PCI_GOANY
- bool "Any"
-
config PCI_GOOLPC
bool "OLPC"
depends on OLPC
+config PCI_GOANY
+ bool "Any"
+
endchoice
config PCI_BIOS
@@ -1531,9 +1536,8 @@
depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
config PCI_OLPC
- bool
- depends on PCI && PCI_GOOLPC
- default y
+ def_bool y
+ depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY)
config PCI_DOMAINS
def_bool y
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index ac1e31b..1836337 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -6,15 +6,19 @@
source "lib/Kconfig.debug"
config NONPROMISC_DEVMEM
- bool "Disable promiscuous /dev/mem"
+ bool "Filter access to /dev/mem"
help
- The /dev/mem file by default only allows userspace access to PCI
- space and the BIOS code and data regions. This is sufficient for
- dosemu and X and all common users of /dev/mem. With this config
- option, you allow userspace access to all of memory, including
- kernel and userspace memory. Accidental access to this is
- obviously disasterous, but specific access can be used by people
- debugging the kernel.
+ If this option is left off, you allow userspace access to all
+ of memory, including kernel and userspace memory. Accidental
+ access to this is obviously disastrous, but specific access can
+ be used by people debugging the kernel.
+
+ If this option is switched on, the /dev/mem file only allows
+ userspace access to PCI space and the BIOS code and data regions.
+ This is sufficient for dosemu and X and all common users of
+ /dev/mem.
+
+ If in doubt, say Y.
config EARLY_PRINTK
bool "Early printk" if EMBEDDED
diff --git a/arch/x86/boot/a20.c b/arch/x86/boot/a20.c
index 90943f8..e01aafd 100644
--- a/arch/x86/boot/a20.c
+++ b/arch/x86/boot/a20.c
@@ -115,8 +115,6 @@
int enable_a20(void)
{
- int loops = A20_ENABLE_LOOPS;
-
#if defined(CONFIG_X86_ELAN)
/* Elan croaks if we try to touch the KBC */
enable_a20_fast();
@@ -128,6 +126,7 @@
enable_a20_kbc();
return 0;
#else
+ int loops = A20_ENABLE_LOOPS;
while (loops--) {
/* First, check to see if A20 is already enabled
(legacy free, etc.) */
diff --git a/arch/x86/kernel/.gitignore b/arch/x86/kernel/.gitignore
index 4ea38a3..08f4fd7 100644
--- a/arch/x86/kernel/.gitignore
+++ b/arch/x86/kernel/.gitignore
@@ -1,2 +1,3 @@
vsyscall.lds
vsyscall_32.lds
+vmlinux.lds
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 5e618c3..77807d4 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -82,6 +82,7 @@
obj-$(CONFIG_KVM_GUEST) += kvm.o
obj-$(CONFIG_KVM_CLOCK) += kvmclock.o
obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o
+obj-$(CONFIG_PARAVIRT_CLOCK) += pvclock.o
obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index c49ebcc..33c5216 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -242,12 +242,19 @@
static void __cpuinit acpi_register_lapic(int id, u8 enabled)
{
+ unsigned int ver = 0;
+
if (!enabled) {
++disabled_cpus;
return;
}
- generic_processor_info(id, 0);
+#ifdef CONFIG_X86_32
+ if (boot_cpu_physical_apicid != -1U)
+ ver = apic_version[boot_cpu_physical_apicid];
+#endif
+
+ generic_processor_info(id, ver);
}
static int __init
@@ -767,8 +774,13 @@
mp_lapic_addr = address;
set_fixmap_nocache(FIX_APIC_BASE, address);
- if (boot_cpu_physical_apicid == -1U)
+ if (boot_cpu_physical_apicid == -1U) {
boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+#ifdef CONFIG_X86_32
+ apic_version[boot_cpu_physical_apicid] =
+ GET_APIC_VERSION(apic_read(APIC_LVR));
+#endif
+ }
}
static int __init early_acpi_parse_madt_lapic_addr_ovr(void)
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S
index f9b77fb..3355973 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.S
+++ b/arch/x86/kernel/acpi/realmode/wakeup.S
@@ -5,6 +5,7 @@
#include <asm/msr-index.h>
#include <asm/page.h>
#include <asm/pgtable.h>
+#include <asm/processor-flags.h>
.code16
.section ".header", "a"
@@ -24,6 +25,11 @@
realmode_flags: .long 0
real_magic: .long 0
trampoline_segment: .word 0
+_pad1: .byte 0
+wakeup_jmp: .byte 0xea /* ljmpw */
+wakeup_jmp_off: .word 3f
+wakeup_jmp_seg: .word 0
+wakeup_gdt: .quad 0, 0, 0
signature: .long 0x51ee1111
.text
@@ -34,11 +40,34 @@
cli
cld
+ /* Apparently some dimwit BIOS programmers don't know how to
+ program a PM to RM transition, and we might end up here with
+ junk in the data segment descriptor registers. The only way
+ to repair that is to go into PM and fix it ourselves... */
+ movw $16, %cx
+ lgdtl %cs:wakeup_gdt
+ movl %cr0, %eax
+ orb $X86_CR0_PE, %al
+ movl %eax, %cr0
+ jmp 1f
+1: ljmpw $8, $2f
+2:
+ movw %cx, %ds
+ movw %cx, %es
+ movw %cx, %ss
+ movw %cx, %fs
+ movw %cx, %gs
+
+ andb $~X86_CR0_PE, %al
+ movl %eax, %cr0
+ jmp wakeup_jmp
+3:
/* Set up segments */
movw %cs, %ax
movw %ax, %ds
movw %ax, %es
movw %ax, %ss
+ lidtl wakeup_idt
movl $wakeup_stack_end, %esp
@@ -98,7 +127,14 @@
jmp 1b
.data
- .balign 4
+ .balign 8
+
+ /* This is the standard real-mode IDT */
+wakeup_idt:
+ .word 0xffff /* limit */
+ .long 0 /* address */
+ .word 0
+
.globl HEAP, heap_end
HEAP:
.long wakeup_heap
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h
index ef8166f..69d38d0 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.h
+++ b/arch/x86/kernel/acpi/realmode/wakeup.h
@@ -24,6 +24,11 @@
u32 realmode_flags;
u32 real_magic;
u16 trampoline_segment; /* segment with trampoline code, 64-bit only */
+ u8 _pad1;
+ u8 wakeup_jmp;
+ u16 wakeup_jmp_off;
+ u16 wakeup_jmp_seg;
+ u64 wakeup_gdt[3];
u32 signature; /* To check we have correct structure */
} __attribute__((__packed__));
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index afc25ee..36af01f 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -50,6 +50,20 @@
header->video_mode = saved_video_mode;
+ header->wakeup_jmp_seg = acpi_wakeup_address >> 4;
+ /* GDT[0]: GDT self-pointer */
+ header->wakeup_gdt[0] =
+ (u64)(sizeof(header->wakeup_gdt) - 1) +
+ ((u64)(acpi_wakeup_address +
+ ((char *)&header->wakeup_gdt - (char *)acpi_realmode))
+ << 16);
+ /* GDT[1]: real-mode-like code segment */
+ header->wakeup_gdt[1] = (0x009bULL << 40) +
+ ((u64)acpi_wakeup_address << 16) + 0xffff;
+ /* GDT[2]: real-mode-like data segment */
+ header->wakeup_gdt[2] = (0x0093ULL << 40) +
+ ((u64)acpi_wakeup_address << 16) + 0xffff;
+
#ifndef CONFIG_64BIT
store_gdt((struct desc_ptr *)&header->pmode_gdt);
@@ -111,7 +125,7 @@
return;
}
- acpi_wakeup_address = acpi_realmode;
+ acpi_wakeup_address = virt_to_phys((void *)acpi_realmode);
}
diff --git a/arch/x86/kernel/efi_32.c b/arch/x86/kernel/efi_32.c
index 5d23d85..4b63c8e 100644
--- a/arch/x86/kernel/efi_32.c
+++ b/arch/x86/kernel/efi_32.c
@@ -49,13 +49,13 @@
local_irq_save(efi_rt_eflags);
/*
- * If I don't have PSE, I should just duplicate two entries in page
- * directory. If I have PSE, I just need to duplicate one entry in
+ * If I don't have PAE, I should just duplicate two entries in page
+ * directory. If I have PAE, I just need to duplicate one entry in
* page directory.
*/
cr4 = read_cr4();
- if (cr4 & X86_CR4_PSE) {
+ if (cr4 & X86_CR4_PAE) {
efi_bak_pg_dir_pointer[0].pgd =
swapper_pg_dir[pgd_index(0)].pgd;
swapper_pg_dir[0].pgd =
@@ -93,7 +93,7 @@
cr4 = read_cr4();
- if (cr4 & X86_CR4_PSE) {
+ if (cr4 & X86_CR4_PAE) {
swapper_pg_dir[pgd_index(0)].pgd =
efi_bak_pg_dir_pointer[0].pgd;
} else {
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 2a609dc..c778e4f 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -248,6 +248,7 @@
DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
+ TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
andl $_TIF_WORK_MASK, %ecx # is there any work to be done on
# int/exception return?
diff --git a/arch/x86/kernel/geode_32.c b/arch/x86/kernel/geode_32.c
index e8edd63..9b08e85 100644
--- a/arch/x86/kernel/geode_32.c
+++ b/arch/x86/kernel/geode_32.c
@@ -166,6 +166,8 @@
static int has_vsa2 = -1;
if (has_vsa2 == -1) {
+ u16 val;
+
/*
* The VSA has virtual registers that we can query for a
* signature.
@@ -173,7 +175,8 @@
outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX);
- has_vsa2 = (inw(VSA_VRC_DATA) == VSA_SIG);
+ val = inw(VSA_VRC_DATA);
+ has_vsa2 = (val == AMD_VSA_SIG || val == GSW_VSA_SIG);
}
return has_vsa2;
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index b2cc737..f7357cc 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -189,7 +189,7 @@
* this stage.
*/
-#define KPMDS ((0x100000000-__PAGE_OFFSET) >> 30) /* Number of kernel PMDs */
+#define KPMDS (((-__PAGE_OFFSET) >> 30) & 3) /* Number of kernel PMDs */
xorl %ebx,%ebx /* %ebx is kept at zero */
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 10a1955..b817974 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -128,7 +128,7 @@
/* Fixup phys_base */
addq %rbp, phys_base(%rip)
-#ifdef CONFIG_SMP
+#ifdef CONFIG_X86_TRAMPOLINE
addq %rbp, trampoline_level4_pgt + 0(%rip)
addq %rbp, trampoline_level4_pgt + (511*8)(%rip)
#endif
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index e03cc95..95e80e5 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -56,6 +56,11 @@
void __init init_thread_xstate(void)
{
+ if (!HAVE_HWFP) {
+ xstate_size = sizeof(struct i387_soft_struct);
+ return;
+ }
+
if (cpu_has_fxsr)
xstate_size = sizeof(struct i387_fxsave_struct);
#ifdef CONFIG_X86_32
@@ -94,7 +99,7 @@
int init_fpu(struct task_struct *tsk)
{
if (tsk_used_math(tsk)) {
- if (tsk == current)
+ if (HAVE_HWFP && tsk == current)
unlazy_fpu(tsk);
return 0;
}
@@ -109,6 +114,15 @@
return -ENOMEM;
}
+#ifdef CONFIG_X86_32
+ if (!HAVE_HWFP) {
+ memset(tsk->thread.xstate, 0, xstate_size);
+ finit();
+ set_stopped_child_used_math(tsk);
+ return 0;
+ }
+#endif
+
if (cpu_has_fxsr) {
struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
@@ -148,7 +162,7 @@
int ret;
if (!cpu_has_fxsr)
- return -ENODEV;
+ return -EIO;
ret = init_fpu(target);
if (ret)
@@ -165,7 +179,7 @@
int ret;
if (!cpu_has_fxsr)
- return -ENODEV;
+ return -EIO;
ret = init_fpu(target);
if (ret)
@@ -330,13 +344,13 @@
struct user_i387_ia32_struct env;
int ret;
- if (!HAVE_HWFP)
- return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf);
-
ret = init_fpu(target);
if (ret)
return ret;
+ if (!HAVE_HWFP)
+ return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf);
+
if (!cpu_has_fxsr) {
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.xstate->fsave, 0,
@@ -360,15 +374,15 @@
struct user_i387_ia32_struct env;
int ret;
- if (!HAVE_HWFP)
- return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
-
ret = init_fpu(target);
if (ret)
return ret;
set_stopped_child_used_math(target);
+ if (!HAVE_HWFP)
+ return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
+
if (!cpu_has_fxsr) {
return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&target->thread.xstate->fsave, 0, -1);
@@ -474,18 +488,18 @@
int restore_i387_ia32(struct _fpstate_ia32 __user *buf)
{
int err;
+ struct task_struct *tsk = current;
- if (HAVE_HWFP) {
- struct task_struct *tsk = current;
-
+ if (HAVE_HWFP)
clear_fpu(tsk);
- if (!used_math()) {
- err = init_fpu(tsk);
- if (err)
- return err;
- }
+ if (!used_math()) {
+ err = init_fpu(tsk);
+ if (err)
+ return err;
+ }
+ if (HAVE_HWFP) {
if (cpu_has_fxsr)
err = restore_i387_fxsave(buf);
else
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index a40d54f..4dc8600d9 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -2130,14 +2130,10 @@
{
int apic1, pin1, apic2, pin2;
int vector;
- unsigned int ver;
unsigned long flags;
local_irq_save(flags);
- ver = apic_read(APIC_LVR);
- ver = GET_APIC_VERSION(ver);
-
/*
* get/set the timer IRQ vector:
*/
@@ -2150,15 +2146,11 @@
* mode for the 8259A whenever interrupts are routed
* through I/O APICs. Also IRQ0 has to be enabled in
* the 8259A which implies the virtual wire has to be
- * disabled in the local APIC. Finally timer interrupts
- * need to be acknowledged manually in the 8259A for
- * timer_interrupt() and for the i82489DX when using
- * the NMI watchdog.
+ * disabled in the local APIC.
*/
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
- timer_ack = !cpu_has_tsc;
- timer_ack |= (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
+ timer_ack = 1;
if (timer_over_8254 > 0)
enable_8259A_irq(0);
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 08a3098..87edf1c 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -18,6 +18,7 @@
#include <linux/clocksource.h>
#include <linux/kvm_para.h>
+#include <asm/pvclock.h>
#include <asm/arch_hooks.h>
#include <asm/msr.h>
#include <asm/apic.h>
@@ -36,18 +37,9 @@
early_param("no-kvmclock", parse_no_kvmclock);
/* The hypervisor will put information about time periodically here */
-static DEFINE_PER_CPU_SHARED_ALIGNED(struct kvm_vcpu_time_info, hv_clock);
-#define get_clock(cpu, field) per_cpu(hv_clock, cpu).field
+static DEFINE_PER_CPU_SHARED_ALIGNED(struct pvclock_vcpu_time_info, hv_clock);
+static struct pvclock_wall_clock wall_clock;
-static inline u64 kvm_get_delta(u64 last_tsc)
-{
- int cpu = smp_processor_id();
- u64 delta = native_read_tsc() - last_tsc;
- return (delta * get_clock(cpu, tsc_to_system_mul)) >> KVM_SCALE;
-}
-
-static struct kvm_wall_clock wall_clock;
-static cycle_t kvm_clock_read(void);
/*
* The wallclock is the time of day when we booted. Since then, some time may
* have elapsed since the hypervisor wrote the data. So we try to account for
@@ -55,64 +47,37 @@
*/
static unsigned long kvm_get_wallclock(void)
{
- u32 wc_sec, wc_nsec;
- u64 delta;
+ struct pvclock_vcpu_time_info *vcpu_time;
struct timespec ts;
- int version, nsec;
int low, high;
low = (int)__pa(&wall_clock);
high = ((u64)__pa(&wall_clock) >> 32);
-
- delta = kvm_clock_read();
-
native_write_msr(MSR_KVM_WALL_CLOCK, low, high);
- do {
- version = wall_clock.wc_version;
- rmb();
- wc_sec = wall_clock.wc_sec;
- wc_nsec = wall_clock.wc_nsec;
- rmb();
- } while ((wall_clock.wc_version != version) || (version & 1));
- delta = kvm_clock_read() - delta;
- delta += wc_nsec;
- nsec = do_div(delta, NSEC_PER_SEC);
- set_normalized_timespec(&ts, wc_sec + delta, nsec);
- /*
- * Of all mechanisms of time adjustment I've tested, this one
- * was the champion!
- */
- return ts.tv_sec + 1;
+ vcpu_time = &get_cpu_var(hv_clock);
+ pvclock_read_wallclock(&wall_clock, vcpu_time, &ts);
+ put_cpu_var(hv_clock);
+
+ return ts.tv_sec;
}
static int kvm_set_wallclock(unsigned long now)
{
- return 0;
+ return -1;
}
-/*
- * This is our read_clock function. The host puts an tsc timestamp each time
- * it updates a new time. Without the tsc adjustment, we can have a situation
- * in which a vcpu starts to run earlier (smaller system_time), but probes
- * time later (compared to another vcpu), leading to backwards time
- */
static cycle_t kvm_clock_read(void)
{
- u64 last_tsc, now;
- int cpu;
+ struct pvclock_vcpu_time_info *src;
+ cycle_t ret;
- preempt_disable();
- cpu = smp_processor_id();
-
- last_tsc = get_clock(cpu, tsc_timestamp);
- now = get_clock(cpu, system_time);
-
- now += kvm_get_delta(last_tsc);
- preempt_enable();
-
- return now;
+ src = &get_cpu_var(hv_clock);
+ ret = pvclock_clocksource_read(src);
+ put_cpu_var(hv_clock);
+ return ret;
}
+
static struct clocksource kvm_clock = {
.name = "kvm-clock",
.read = kvm_clock_read,
@@ -123,13 +88,14 @@
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static int kvm_register_clock(void)
+static int kvm_register_clock(char *txt)
{
int cpu = smp_processor_id();
int low, high;
low = (int)__pa(&per_cpu(hv_clock, cpu)) | 1;
high = ((u64)__pa(&per_cpu(hv_clock, cpu)) >> 32);
-
+ printk(KERN_INFO "kvm-clock: cpu %d, msr %x:%x, %s\n",
+ cpu, high, low, txt);
return native_write_msr_safe(MSR_KVM_SYSTEM_TIME, low, high);
}
@@ -140,12 +106,20 @@
* Now that the first cpu already had this clocksource initialized,
* we shouldn't fail.
*/
- WARN_ON(kvm_register_clock());
+ WARN_ON(kvm_register_clock("secondary cpu clock"));
/* ok, done with our trickery, call native */
setup_secondary_APIC_clock();
}
#endif
+#ifdef CONFIG_SMP
+void __init kvm_smp_prepare_boot_cpu(void)
+{
+ WARN_ON(kvm_register_clock("primary cpu clock"));
+ native_smp_prepare_boot_cpu();
+}
+#endif
+
/*
* After the clock is registered, the host will keep writing to the
* registered memory location. If the guest happens to shutdown, this memory
@@ -174,7 +148,7 @@
return;
if (kvmclock && kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) {
- if (kvm_register_clock())
+ if (kvm_register_clock("boot clock"))
return;
pv_time_ops.get_wallclock = kvm_get_wallclock;
pv_time_ops.set_wallclock = kvm_set_wallclock;
@@ -182,6 +156,9 @@
#ifdef CONFIG_X86_LOCAL_APIC
pv_apic_ops.setup_secondary_clock = kvm_setup_secondary_clock;
#endif
+#ifdef CONFIG_SMP
+ smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu;
+#endif
machine_ops.shutdown = kvm_shutdown;
#ifdef CONFIG_KEXEC
machine_ops.crash_shutdown = kvm_crash_shutdown;
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 3cad17f..07c0f82 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -155,6 +155,7 @@
wrmsr(msr, value, dummy);
return 0;
}
+EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event);
int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable)
{
@@ -222,6 +223,7 @@
/* No timers available - too bad */
return -1;
}
+EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer);
#ifdef CONFIG_GEODE_MFGPT_TIMER
diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c
index 11b14bb..84160f7 100644
--- a/arch/x86/kernel/nmi_32.c
+++ b/arch/x86/kernel/nmi_32.c
@@ -26,7 +26,6 @@
#include <asm/smp.h>
#include <asm/nmi.h>
-#include <asm/timer.h>
#include "mach_traps.h"
@@ -82,7 +81,7 @@
prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
if (!prev_nmi_count)
- goto error;
+ return -1;
printk(KERN_INFO "Testing NMI watchdog ... ");
@@ -119,7 +118,7 @@
if (!atomic_read(&nmi_active)) {
kfree(prev_nmi_count);
atomic_set(&nmi_active, -1);
- goto error;
+ return -1;
}
printk("OK.\n");
@@ -130,10 +129,6 @@
kfree(prev_nmi_count);
return 0;
-error:
- timer_ack = !cpu_has_tsc;
-
- return -1;
}
static int __init setup_nmi_watchdog(char *str)
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index c5ef1af..dc00a13 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -378,6 +378,7 @@
struct page *page;
unsigned long dma_mask = 0;
dma_addr_t bus;
+ int noretry = 0;
/* ignore region specifiers */
gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
@@ -397,20 +398,25 @@
if (dev->dma_mask == NULL)
return NULL;
- /* Don't invoke OOM killer */
- gfp |= __GFP_NORETRY;
+ /* Don't invoke OOM killer or retry in lower 16MB DMA zone */
+ if (gfp & __GFP_DMA)
+ noretry = 1;
#ifdef CONFIG_X86_64
/* Why <=? Even when the mask is smaller than 4GB it is often
larger than 16MB and in this case we have a chance of
finding fitting memory in the next higher zone first. If
not retry with true GFP_DMA. -AK */
- if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA))
+ if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA)) {
gfp |= GFP_DMA32;
+ if (dma_mask < DMA_32BIT_MASK)
+ noretry = 1;
+ }
#endif
again:
- page = dma_alloc_pages(dev, gfp, get_order(size));
+ page = dma_alloc_pages(dev,
+ noretry ? gfp | __GFP_NORETRY : gfp, get_order(size));
if (page == NULL)
return NULL;
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index c07455d..aa8ec92 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -26,6 +26,7 @@
#include <linux/kdebug.h>
#include <linux/scatterlist.h>
#include <linux/iommu-helper.h>
+#include <linux/sysdev.h>
#include <asm/atomic.h>
#include <asm/io.h>
#include <asm/mtrr.h>
@@ -548,6 +549,28 @@
return aper_base;
}
+static int gart_resume(struct sys_device *dev)
+{
+ return 0;
+}
+
+static int gart_suspend(struct sys_device *dev, pm_message_t state)
+{
+ return -EINVAL;
+}
+
+static struct sysdev_class gart_sysdev_class = {
+ .name = "gart",
+ .suspend = gart_suspend,
+ .resume = gart_resume,
+
+};
+
+static struct sys_device device_gart = {
+ .id = 0,
+ .cls = &gart_sysdev_class,
+};
+
/*
* Private Northbridge GATT initialization in case we cannot use the
* AGP driver for some reason.
@@ -558,7 +581,7 @@
unsigned aper_base, new_aper_base;
struct pci_dev *dev;
void *gatt;
- int i;
+ int i, error;
printk(KERN_INFO "PCI-DMA: Disabling AGP.\n");
aper_size = aper_base = info->aper_size = 0;
@@ -606,6 +629,12 @@
pci_write_config_dword(dev, 0x90, ctl);
}
+
+ error = sysdev_class_register(&gart_sysdev_class);
+ if (!error)
+ error = sysdev_register(&device_gart);
+ if (error)
+ panic("Could not register gart_sysdev -- would corrupt data on next suspend");
flush_gart();
printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n",
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index f8476df..e2db9ac 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -333,6 +333,7 @@
/*
* Forget coprocessor state..
*/
+ tsk->fpu_counter = 0;
clear_fpu(tsk);
clear_used_math();
}
@@ -649,8 +650,11 @@
/* If the task has used fpu the last 5 timeslices, just do a full
* restore of the math state immediately to avoid the trap; the
* chances of needing FPU soon are obviously high now
+ *
+ * tsk_used_math() checks prevent calling math_state_restore(),
+ * which can sleep in the case of !tsk_used_math()
*/
- if (next_p->fpu_counter > 5)
+ if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
math_state_restore();
/*
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index e2319f3..c6eb5c9 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -294,6 +294,7 @@
/*
* Forget coprocessor state..
*/
+ tsk->fpu_counter = 0;
clear_fpu(tsk);
clear_used_math();
}
@@ -658,8 +659,11 @@
/* If the task has used fpu the last 5 timeslices, just do a full
* restore of the math state immediately to avoid the trap; the
* chances of needing FPU soon are obviously high now
+ *
+ * tsk_used_math() checks prevent calling math_state_restore(),
+ * which can sleep in the case of !tsk_used_math()
*/
- if (next_p->fpu_counter>5)
+ if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
math_state_restore();
return prev_p;
}
diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
new file mode 100644
index 0000000..05fbe9a
--- /dev/null
+++ b/arch/x86/kernel/pvclock.c
@@ -0,0 +1,141 @@
+/* paravirtual clock -- common code used by kvm/xen
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <linux/kernel.h>
+#include <linux/percpu.h>
+#include <asm/pvclock.h>
+
+/*
+ * These are perodically updated
+ * xen: magic shared_info page
+ * kvm: gpa registered via msr
+ * and then copied here.
+ */
+struct pvclock_shadow_time {
+ u64 tsc_timestamp; /* TSC at last update of time vals. */
+ u64 system_timestamp; /* Time, in nanosecs, since boot. */
+ u32 tsc_to_nsec_mul;
+ int tsc_shift;
+ u32 version;
+};
+
+/*
+ * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
+ * yielding a 64-bit result.
+ */
+static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
+{
+ u64 product;
+#ifdef __i386__
+ u32 tmp1, tmp2;
+#endif
+
+ if (shift < 0)
+ delta >>= -shift;
+ else
+ delta <<= shift;
+
+#ifdef __i386__
+ __asm__ (
+ "mul %5 ; "
+ "mov %4,%%eax ; "
+ "mov %%edx,%4 ; "
+ "mul %5 ; "
+ "xor %5,%5 ; "
+ "add %4,%%eax ; "
+ "adc %5,%%edx ; "
+ : "=A" (product), "=r" (tmp1), "=r" (tmp2)
+ : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
+#elif __x86_64__
+ __asm__ (
+ "mul %%rdx ; shrd $32,%%rdx,%%rax"
+ : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
+#else
+#error implement me!
+#endif
+
+ return product;
+}
+
+static u64 pvclock_get_nsec_offset(struct pvclock_shadow_time *shadow)
+{
+ u64 delta = native_read_tsc() - shadow->tsc_timestamp;
+ return scale_delta(delta, shadow->tsc_to_nsec_mul, shadow->tsc_shift);
+}
+
+/*
+ * Reads a consistent set of time-base values from hypervisor,
+ * into a shadow data area.
+ */
+static unsigned pvclock_get_time_values(struct pvclock_shadow_time *dst,
+ struct pvclock_vcpu_time_info *src)
+{
+ do {
+ dst->version = src->version;
+ rmb(); /* fetch version before data */
+ dst->tsc_timestamp = src->tsc_timestamp;
+ dst->system_timestamp = src->system_time;
+ dst->tsc_to_nsec_mul = src->tsc_to_system_mul;
+ dst->tsc_shift = src->tsc_shift;
+ rmb(); /* test version after fetching data */
+ } while ((src->version & 1) || (dst->version != src->version));
+
+ return dst->version;
+}
+
+cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
+{
+ struct pvclock_shadow_time shadow;
+ unsigned version;
+ cycle_t ret, offset;
+
+ do {
+ version = pvclock_get_time_values(&shadow, src);
+ barrier();
+ offset = pvclock_get_nsec_offset(&shadow);
+ ret = shadow.system_timestamp + offset;
+ barrier();
+ } while (version != src->version);
+
+ return ret;
+}
+
+void pvclock_read_wallclock(struct pvclock_wall_clock *wall_clock,
+ struct pvclock_vcpu_time_info *vcpu_time,
+ struct timespec *ts)
+{
+ u32 version;
+ u64 delta;
+ struct timespec now;
+
+ /* get wallclock at system boot */
+ do {
+ version = wall_clock->version;
+ rmb(); /* fetch version before time */
+ now.tv_sec = wall_clock->sec;
+ now.tv_nsec = wall_clock->nsec;
+ rmb(); /* fetch time before checking version */
+ } while ((wall_clock->version & 1) || (version != wall_clock->version));
+
+ delta = pvclock_clocksource_read(vcpu_time); /* time since system boot */
+ delta += now.tv_sec * (u64)NSEC_PER_SEC + now.tv_nsec;
+
+ now.tv_nsec = do_div(delta, NSEC_PER_SEC);
+ now.tv_sec = delta;
+
+ set_normalized_timespec(ts, now.tv_sec, now.tv_nsec);
+}
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 9615eee..05191bb 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -4,6 +4,8 @@
#include <linux/acpi.h>
#include <linux/bcd.h>
#include <linux/mc146818rtc.h>
+#include <linux/platform_device.h>
+#include <linux/pnp.h>
#include <asm/time.h>
#include <asm/vsyscall.h>
@@ -197,3 +199,35 @@
}
EXPORT_SYMBOL(native_read_tsc);
+
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = RTC_PORT(0),
+ .end = RTC_PORT(1),
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ .start = RTC_IRQ,
+ .end = RTC_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device rtc_device = {
+ .name = "rtc_cmos",
+ .id = -1,
+ .resource = rtc_resources,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+};
+
+static __init int add_rtc_cmos(void)
+{
+#ifdef CONFIG_PNP
+ if (!pnp_platform_devices)
+ platform_device_register(&rtc_device);
+#else
+ platform_device_register(&rtc_device);
+#endif /* CONFIG_PNP */
+ return 0;
+}
+device_initcall(add_rtc_cmos);
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index 2c5f8b2..5a2f8e0 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -532,10 +532,16 @@
(unsigned long)(crash_size >> 20),
(unsigned long)(crash_base >> 20),
(unsigned long)(total_mem >> 20));
+
+ if (reserve_bootmem(crash_base, crash_size,
+ BOOTMEM_EXCLUSIVE) < 0) {
+ printk(KERN_INFO "crashkernel reservation "
+ "failed - memory is in use\n");
+ return;
+ }
+
crashk_res.start = crash_base;
crashk_res.end = crash_base + crash_size - 1;
- reserve_bootmem(crash_base, crash_size,
- BOOTMEM_DEFAULT);
} else
printk(KERN_INFO "crashkernel reservation failed - "
"you have to specify a base address\n");
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 3898849..3e1cece 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -996,7 +996,6 @@
#endif
cpu_clear(cpu, cpu_callout_map); /* was set by do_boot_cpu() */
cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */
- cpu_clear(cpu, cpu_possible_map);
cpu_clear(cpu, cpu_present_map);
per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID;
}
@@ -1190,6 +1189,7 @@
*/
void __init native_smp_prepare_cpus(unsigned int max_cpus)
{
+ preempt_disable();
nmi_watchdog_default();
smp_cpu_index_default();
current_cpu_data = boot_cpu_data;
@@ -1206,7 +1206,7 @@
if (smp_sanity_check(max_cpus) < 0) {
printk(KERN_INFO "SMP disabled\n");
disable_smp();
- return;
+ goto out;
}
preempt_disable();
@@ -1246,6 +1246,8 @@
printk(KERN_INFO "CPU%d: ", 0);
print_cpu_info(&cpu_data(0));
setup_boot_clock();
+out:
+ preempt_enable();
}
/*
* Early setup to make printk work.
diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c
index bde6f63..08d752d 100644
--- a/arch/x86/kernel/traps_32.c
+++ b/arch/x86/kernel/traps_32.c
@@ -544,6 +544,7 @@
#define DO_ERROR(trapnr, signr, str, name) \
void do_##name(struct pt_regs *regs, long error_code) \
{ \
+ trace_hardirqs_fixup(); \
if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
== NOTIFY_STOP) \
return; \
diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c
index adff76e..f1a95d1 100644
--- a/arch/x86/kernel/traps_64.c
+++ b/arch/x86/kernel/traps_64.c
@@ -104,30 +104,7 @@
void printk_address(unsigned long address, int reliable)
{
-#ifdef CONFIG_KALLSYMS
- unsigned long offset = 0, symsize;
- const char *symname;
- char *modname;
- char *delim = ":";
- char namebuf[KSYM_NAME_LEN];
- char reliab[4] = "";
-
- symname = kallsyms_lookup(address, &symsize, &offset,
- &modname, namebuf);
- if (!symname) {
- printk(" [<%016lx>]\n", address);
- return;
- }
- if (!reliable)
- strcpy(reliab, "? ");
-
- if (!modname)
- modname = delim = "";
- printk(" [<%016lx>] %s%s%s%s%s+0x%lx/0x%lx\n",
- address, reliab, delim, modname, delim, symname, offset, symsize);
-#else
- printk(" [<%016lx>]\n", address);
-#endif
+ printk(" [<%016lx>] %s%pS\n", address, reliable ? "": "? ", (void *) address);
}
static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
index 068759d..65b7063 100644
--- a/arch/x86/kernel/tsc_32.c
+++ b/arch/x86/kernel/tsc_32.c
@@ -14,7 +14,10 @@
#include "mach_timer.h"
-static int tsc_disabled;
+/* native_sched_clock() is called before tsc_init(), so
+ we must start with the TSC soft disabled to prevent
+ erroneous rdtsc usage on !cpu_has_tsc processors */
+static int tsc_disabled = -1;
/*
* On some systems the TSC frequency does not
@@ -402,25 +405,20 @@
{
int cpu;
- if (!cpu_has_tsc || tsc_disabled) {
- /* Disable the TSC in case of !cpu_has_tsc */
- tsc_disabled = 1;
+ if (!cpu_has_tsc || tsc_disabled > 0)
return;
- }
cpu_khz = calculate_cpu_khz();
tsc_khz = cpu_khz;
if (!cpu_khz) {
mark_tsc_unstable("could not calculate TSC khz");
- /*
- * We need to disable the TSC completely in this case
- * to prevent sched_clock() from using it.
- */
- tsc_disabled = 1;
return;
}
+ /* now allow native_sched_clock() to use rdtsc */
+ tsc_disabled = 0;
+
printk("Detected %lu.%03lu MHz processor.\n",
(unsigned long)cpu_khz / 1000,
(unsigned long)cpu_khz % 1000);
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 7c077a9..3829aa7 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -200,10 +200,12 @@
atomic_inc(&pt->pending);
smp_mb__after_atomic_inc();
- /* FIXME: handle case where the guest is in guest mode */
- if (vcpu0 && waitqueue_active(&vcpu0->wq)) {
- vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
- wake_up_interruptible(&vcpu0->wq);
+ if (vcpu0) {
+ set_bit(KVM_REQ_PENDING_TIMER, &vcpu0->requests);
+ if (waitqueue_active(&vcpu0->wq)) {
+ vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
+ wake_up_interruptible(&vcpu0->wq);
+ }
}
pt->timer.expires = ktime_add_ns(pt->timer.expires, pt->period);
@@ -237,6 +239,19 @@
return HRTIMER_NORESTART;
}
+void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
+{
+ struct kvm_pit *pit = vcpu->kvm->arch.vpit;
+ struct hrtimer *timer;
+
+ if (vcpu->vcpu_id != 0 || !pit)
+ return;
+
+ timer = &pit->pit_state.pit_timer.timer;
+ if (hrtimer_cancel(timer))
+ hrtimer_start(timer, timer->expires, HRTIMER_MODE_ABS);
+}
+
static void destroy_pit_timer(struct kvm_kpit_timer *pt)
{
pr_debug("pit: execute del timer!\n");
diff --git a/arch/x86/kvm/irq.c b/arch/x86/kvm/irq.c
index ce1f583..76d736b 100644
--- a/arch/x86/kvm/irq.c
+++ b/arch/x86/kvm/irq.c
@@ -94,3 +94,9 @@
/* TODO: PIT, RTC etc. */
}
EXPORT_SYMBOL_GPL(kvm_timer_intr_post);
+
+void __kvm_migrate_timers(struct kvm_vcpu *vcpu)
+{
+ __kvm_migrate_apic_timer(vcpu);
+ __kvm_migrate_pit_timer(vcpu);
+}
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 1802134..2a15be2 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -84,6 +84,8 @@
void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu);
void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu);
void __kvm_migrate_apic_timer(struct kvm_vcpu *vcpu);
+void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu);
+void __kvm_migrate_timers(struct kvm_vcpu *vcpu);
int pit_has_pending_timer(struct kvm_vcpu *vcpu);
int apic_has_pending_timer(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index c297c50..ebc03f5 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -940,6 +940,7 @@
wait_queue_head_t *q = &apic->vcpu->wq;
atomic_inc(&apic->timer.pending);
+ set_bit(KVM_REQ_PENDING_TIMER, &apic->vcpu->requests);
if (waitqueue_active(q)) {
apic->vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
wake_up_interruptible(q);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 7246b60..7e7c396 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -640,6 +640,7 @@
rmap_remove(kvm, spte);
--kvm->stat.lpages;
set_shadow_pte(spte, shadow_trap_nonpresent_pte);
+ spte = NULL;
write_protected = 1;
}
spte = rmap_next(kvm, rmapp, spte);
@@ -658,7 +659,7 @@
u64 *end;
for (pos = spt, end = pos + PAGE_SIZE / sizeof(u64); pos != end; pos++)
- if (*pos != shadow_trap_nonpresent_pte) {
+ if (is_shadow_present_pte(*pos)) {
printk(KERN_ERR "%s: %p %llx\n", __func__,
pos, *pos);
return 0;
@@ -1082,10 +1083,6 @@
struct kvm_mmu_page *shadow;
spte |= PT_WRITABLE_MASK;
- if (user_fault) {
- mmu_unshadow(vcpu->kvm, gfn);
- goto unshadowed;
- }
shadow = kvm_mmu_lookup_page(vcpu->kvm, gfn);
if (shadow ||
@@ -1102,8 +1099,6 @@
}
}
-unshadowed:
-
if (pte_access & ACC_WRITE_MASK)
mark_page_dirty(vcpu->kvm, gfn);
@@ -1580,11 +1575,13 @@
u64 *spte,
const void *new)
{
- if ((sp->role.level != PT_PAGE_TABLE_LEVEL)
- && !vcpu->arch.update_pte.largepage) {
- ++vcpu->kvm->stat.mmu_pde_zapped;
- return;
- }
+ if (sp->role.level != PT_PAGE_TABLE_LEVEL) {
+ if (!vcpu->arch.update_pte.largepage ||
+ sp->role.glevels == PT32_ROOT_LEVEL) {
+ ++vcpu->kvm->stat.mmu_pde_zapped;
+ return;
+ }
+ }
++vcpu->kvm->stat.mmu_pte_updated;
if (sp->role.glevels == PT32_ROOT_LEVEL)
@@ -1858,6 +1855,7 @@
sp = container_of(vcpu->kvm->arch.active_mmu_pages.next,
struct kvm_mmu_page, link);
kvm_mmu_zap_page(vcpu->kvm, sp);
+ cond_resched();
}
free_page((unsigned long)vcpu->arch.mmu.pae_root);
}
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 156fe10..934c7b6 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -418,7 +418,7 @@
/* mmio */
if (is_error_pfn(pfn)) {
- pgprintk("gfn %x is mmio\n", walker.gfn);
+ pgprintk("gfn %lx is mmio\n", walker.gfn);
kvm_release_pfn_clean(pfn);
return 1;
}
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index ab22615..6b0d5fa 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -688,7 +688,7 @@
delta = vcpu->arch.host_tsc - tsc_this;
svm->vmcb->control.tsc_offset += delta;
vcpu->cpu = cpu;
- kvm_migrate_apic_timer(vcpu);
+ kvm_migrate_timers(vcpu);
}
for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index bfe4db1..540e951 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -566,7 +566,7 @@
load_transition_efer(vmx);
}
-static void vmx_load_host_state(struct vcpu_vmx *vmx)
+static void __vmx_load_host_state(struct vcpu_vmx *vmx)
{
unsigned long flags;
@@ -596,6 +596,13 @@
reload_host_efer(vmx);
}
+static void vmx_load_host_state(struct vcpu_vmx *vmx)
+{
+ preempt_disable();
+ __vmx_load_host_state(vmx);
+ preempt_enable();
+}
+
/*
* Switches to specified vcpu, until a matching vcpu_put(), but assumes
* vcpu mutex is already taken.
@@ -608,7 +615,7 @@
if (vcpu->cpu != cpu) {
vcpu_clear(vmx);
- kvm_migrate_apic_timer(vcpu);
+ kvm_migrate_timers(vcpu);
vpid_sync_vcpu_all(vmx);
}
@@ -654,7 +661,7 @@
static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
{
- vmx_load_host_state(to_vmx(vcpu));
+ __vmx_load_host_state(to_vmx(vcpu));
}
static void vmx_fpu_activate(struct kvm_vcpu *vcpu)
@@ -884,11 +891,8 @@
switch (msr_index) {
#ifdef CONFIG_X86_64
case MSR_EFER:
+ vmx_load_host_state(vmx);
ret = kvm_set_msr_common(vcpu, msr_index, data);
- if (vmx->host_state.loaded) {
- reload_host_efer(vmx);
- load_transition_efer(vmx);
- }
break;
case MSR_FS_BASE:
vmcs_writel(GUEST_FS_BASE, data);
@@ -910,11 +914,10 @@
guest_write_tsc(data);
break;
default:
+ vmx_load_host_state(vmx);
msr = find_msr_entry(vmx, msr_index);
if (msr) {
msr->data = data;
- if (vmx->host_state.loaded)
- load_msrs(vmx->guest_msrs, vmx->save_nmsrs);
break;
}
ret = kvm_set_msr_common(vcpu, msr_index, data);
@@ -1036,6 +1039,7 @@
static void hardware_disable(void *garbage)
{
asm volatile (ASM_VMX_VMXOFF : : : "cc");
+ write_cr4(read_cr4() & ~X86_CR4_VMXE);
}
static __init int adjust_vmx_controls(u32 ctl_min, u32 ctl_opt,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 21338bd..63a77ca 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -492,8 +492,8 @@
static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock)
{
static int version;
- struct kvm_wall_clock wc;
- struct timespec wc_ts;
+ struct pvclock_wall_clock wc;
+ struct timespec now, sys, boot;
if (!wall_clock)
return;
@@ -502,10 +502,19 @@
kvm_write_guest(kvm, wall_clock, &version, sizeof(version));
- wc_ts = current_kernel_time();
- wc.wc_sec = wc_ts.tv_sec;
- wc.wc_nsec = wc_ts.tv_nsec;
- wc.wc_version = version;
+ /*
+ * The guest calculates current wall clock time by adding
+ * system time (updated by kvm_write_guest_time below) to the
+ * wall clock specified here. guest system time equals host
+ * system time for us, thus we must fill in host boot time here.
+ */
+ now = current_kernel_time();
+ ktime_get_ts(&sys);
+ boot = ns_to_timespec(timespec_to_ns(&now) - timespec_to_ns(&sys));
+
+ wc.sec = boot.tv_sec;
+ wc.nsec = boot.tv_nsec;
+ wc.version = version;
kvm_write_guest(kvm, wall_clock, &wc, sizeof(wc));
@@ -513,6 +522,45 @@
kvm_write_guest(kvm, wall_clock, &version, sizeof(version));
}
+static uint32_t div_frac(uint32_t dividend, uint32_t divisor)
+{
+ uint32_t quotient, remainder;
+
+ /* Don't try to replace with do_div(), this one calculates
+ * "(dividend << 32) / divisor" */
+ __asm__ ( "divl %4"
+ : "=a" (quotient), "=d" (remainder)
+ : "0" (0), "1" (dividend), "r" (divisor) );
+ return quotient;
+}
+
+static void kvm_set_time_scale(uint32_t tsc_khz, struct pvclock_vcpu_time_info *hv_clock)
+{
+ uint64_t nsecs = 1000000000LL;
+ int32_t shift = 0;
+ uint64_t tps64;
+ uint32_t tps32;
+
+ tps64 = tsc_khz * 1000LL;
+ while (tps64 > nsecs*2) {
+ tps64 >>= 1;
+ shift--;
+ }
+
+ tps32 = (uint32_t)tps64;
+ while (tps32 <= (uint32_t)nsecs) {
+ tps32 <<= 1;
+ shift++;
+ }
+
+ hv_clock->tsc_shift = shift;
+ hv_clock->tsc_to_system_mul = div_frac(nsecs, tps32);
+
+ pr_debug("%s: tsc_khz %u, tsc_shift %d, tsc_mul %u\n",
+ __FUNCTION__, tsc_khz, hv_clock->tsc_shift,
+ hv_clock->tsc_to_system_mul);
+}
+
static void kvm_write_guest_time(struct kvm_vcpu *v)
{
struct timespec ts;
@@ -523,6 +571,11 @@
if ((!vcpu->time_page))
return;
+ if (unlikely(vcpu->hv_clock_tsc_khz != tsc_khz)) {
+ kvm_set_time_scale(tsc_khz, &vcpu->hv_clock);
+ vcpu->hv_clock_tsc_khz = tsc_khz;
+ }
+
/* Keep irq disabled to prevent changes to the clock */
local_irq_save(flags);
kvm_get_msr(v, MSR_IA32_TIME_STAMP_COUNTER,
@@ -537,14 +590,14 @@
/*
* The interface expects us to write an even number signaling that the
* update is finished. Since the guest won't see the intermediate
- * state, we just write "2" at the end
+ * state, we just increase by 2 at the end.
*/
- vcpu->hv_clock.version = 2;
+ vcpu->hv_clock.version += 2;
shared_kaddr = kmap_atomic(vcpu->time_page, KM_USER0);
memcpy(shared_kaddr + vcpu->time_offset, &vcpu->hv_clock,
- sizeof(vcpu->hv_clock));
+ sizeof(vcpu->hv_clock));
kunmap_atomic(shared_kaddr, KM_USER0);
@@ -599,10 +652,6 @@
/* ...but clean it before doing the actual write */
vcpu->arch.time_offset = data & ~(PAGE_MASK | 1);
- vcpu->arch.hv_clock.tsc_to_system_mul =
- clocksource_khz2mult(tsc_khz, 22);
- vcpu->arch.hv_clock.tsc_shift = 22;
-
down_read(¤t->mm->mmap_sem);
vcpu->arch.time_page =
gfn_to_page(vcpu->kvm, data >> PAGE_SHIFT);
@@ -2758,7 +2807,9 @@
if (vcpu->requests) {
if (test_and_clear_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests))
- __kvm_migrate_apic_timer(vcpu);
+ __kvm_migrate_timers(vcpu);
+ if (test_and_clear_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests))
+ kvm_x86_ops->tlb_flush(vcpu);
if (test_and_clear_bit(KVM_REQ_REPORT_TPR_ACCESS,
&vcpu->requests)) {
kvm_run->exit_reason = KVM_EXIT_TPR_ACCESS;
@@ -2772,6 +2823,7 @@
}
}
+ clear_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests);
kvm_inject_pending_timer_irqs(vcpu);
preempt_disable();
@@ -2781,21 +2833,13 @@
local_irq_disable();
- if (need_resched()) {
+ if (vcpu->requests || need_resched()) {
local_irq_enable();
preempt_enable();
r = 1;
goto out;
}
- if (vcpu->requests)
- if (test_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests)) {
- local_irq_enable();
- preempt_enable();
- r = 1;
- goto out;
- }
-
if (signal_pending(current)) {
local_irq_enable();
preempt_enable();
@@ -2825,9 +2869,6 @@
kvm_guest_enter();
- if (vcpu->requests)
- if (test_and_clear_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests))
- kvm_x86_ops->tlb_flush(vcpu);
KVMTRACE_0D(VMENTRY, vcpu, entryexit);
kvm_x86_ops->run(vcpu, kvm_run);
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index 8a96320..932f216 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1727,7 +1727,8 @@
if (rc)
goto done;
- kvm_emulate_hypercall(ctxt->vcpu);
+ /* Let the processor re-execute the fixed hypercall */
+ c->eip = ctxt->vcpu->arch.rip;
/* Disable writeback. */
c->dst.type = OP_NONE;
break;
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index af65b2d..5c7e2fd 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -582,8 +582,9 @@
int vector = FIRST_EXTERNAL_VECTOR + i;
if (vector != SYSCALL_VECTOR) {
set_intr_gate(vector, interrupt[i]);
- set_irq_chip_and_handler(i, &lguest_irq_controller,
- handle_level_irq);
+ set_irq_chip_and_handler_name(i, &lguest_irq_controller,
+ handle_level_irq,
+ "level");
}
}
/* This call is required to set up for 4k stacks, where we have
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index 70bebd3..ee1c3f6 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -217,19 +217,19 @@
/* table sorted by exception address */
.section __ex_table,"a"
.align 8
- .quad .Ls1,.Ls1e
- .quad .Ls2,.Ls2e
- .quad .Ls3,.Ls3e
- .quad .Ls4,.Ls4e
- .quad .Ld1,.Ls1e
+ .quad .Ls1,.Ls1e /* Ls1-Ls4 have copied zero bytes */
+ .quad .Ls2,.Ls1e
+ .quad .Ls3,.Ls1e
+ .quad .Ls4,.Ls1e
+ .quad .Ld1,.Ls1e /* Ld1-Ld4 have copied 0-24 bytes */
.quad .Ld2,.Ls2e
.quad .Ld3,.Ls3e
.quad .Ld4,.Ls4e
- .quad .Ls5,.Ls5e
- .quad .Ls6,.Ls6e
- .quad .Ls7,.Ls7e
- .quad .Ls8,.Ls8e
- .quad .Ld5,.Ls5e
+ .quad .Ls5,.Ls5e /* Ls5-Ls8 have copied 32 bytes */
+ .quad .Ls6,.Ls5e
+ .quad .Ls7,.Ls5e
+ .quad .Ls8,.Ls5e
+ .quad .Ld5,.Ls5e /* Ld5-Ld8 have copied 32-56 bytes */
.quad .Ld6,.Ls6e
.quad .Ld7,.Ls7e
.quad .Ld8,.Ls8e
@@ -244,11 +244,8 @@
.quad .Le5,.Le_zero
.previous
- /* compute 64-offset for main loop. 8 bytes accuracy with error on the
- pessimistic side. this is gross. it would be better to fix the
- interface. */
/* eax: zero, ebx: 64 */
-.Ls1e: addl $8,%eax
+.Ls1e: addl $8,%eax /* eax is bytes left uncopied within the loop (Ls1e: 64 .. Ls8e: 8) */
.Ls2e: addl $8,%eax
.Ls3e: addl $8,%eax
.Ls4e: addl $8,%eax
diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S
index 5196762..9d3d1ab 100644
--- a/arch/x86/lib/copy_user_nocache_64.S
+++ b/arch/x86/lib/copy_user_nocache_64.S
@@ -145,19 +145,19 @@
/* table sorted by exception address */
.section __ex_table,"a"
.align 8
- .quad .Ls1,.Ls1e
- .quad .Ls2,.Ls2e
- .quad .Ls3,.Ls3e
- .quad .Ls4,.Ls4e
- .quad .Ld1,.Ls1e
+ .quad .Ls1,.Ls1e /* .Ls[1-4] - 0 bytes copied */
+ .quad .Ls2,.Ls1e
+ .quad .Ls3,.Ls1e
+ .quad .Ls4,.Ls1e
+ .quad .Ld1,.Ls1e /* .Ld[1-4] - 0..24 bytes coped */
.quad .Ld2,.Ls2e
.quad .Ld3,.Ls3e
.quad .Ld4,.Ls4e
- .quad .Ls5,.Ls5e
- .quad .Ls6,.Ls6e
- .quad .Ls7,.Ls7e
- .quad .Ls8,.Ls8e
- .quad .Ld5,.Ls5e
+ .quad .Ls5,.Ls5e /* .Ls[5-8] - 32 bytes copied */
+ .quad .Ls6,.Ls5e
+ .quad .Ls7,.Ls5e
+ .quad .Ls8,.Ls5e
+ .quad .Ld5,.Ls5e /* .Ld[5-8] - 32..56 bytes copied */
.quad .Ld6,.Ls6e
.quad .Ld7,.Ls7e
.quad .Ld8,.Ls8e
@@ -172,11 +172,8 @@
.quad .Le5,.Le_zero
.previous
- /* compute 64-offset for main loop. 8 bytes accuracy with error on the
- pessimistic side. this is gross. it would be better to fix the
- interface. */
/* eax: zero, ebx: 64 */
-.Ls1e: addl $8,%eax
+.Ls1e: addl $8,%eax /* eax: bytes left uncopied: Ls1e: 64 .. Ls8e: 8 */
.Ls2e: addl $8,%eax
.Ls3e: addl $8,%eax
.Ls4e: addl $8,%eax
diff --git a/arch/x86/lib/delay_32.c b/arch/x86/lib/delay_32.c
index 4535e6d..d710f2d 100644
--- a/arch/x86/lib/delay_32.c
+++ b/arch/x86/lib/delay_32.c
@@ -44,13 +44,36 @@
static void delay_tsc(unsigned long loops)
{
unsigned long bclock, now;
+ int cpu;
- preempt_disable(); /* TSC's are per-cpu */
+ preempt_disable();
+ cpu = smp_processor_id();
rdtscl(bclock);
- do {
- rep_nop();
+ for (;;) {
rdtscl(now);
- } while ((now-bclock) < loops);
+ if ((now - bclock) >= loops)
+ break;
+
+ /* Allow RT tasks to run */
+ preempt_enable();
+ rep_nop();
+ preempt_disable();
+
+ /*
+ * It is possible that we moved to another CPU, and
+ * since TSC's are per-cpu we need to calculate
+ * that. The delay must guarantee that we wait "at
+ * least" the amount of time. Being moved to another
+ * CPU could make the wait longer but we just need to
+ * make sure we waited long enough. Rebalance the
+ * counter for this CPU.
+ */
+ if (unlikely(cpu != smp_processor_id())) {
+ loops -= (now - bclock);
+ cpu = smp_processor_id();
+ rdtscl(bclock);
+ }
+ }
preempt_enable();
}
diff --git a/arch/x86/lib/delay_64.c b/arch/x86/lib/delay_64.c
index bbc6105..4c441be 100644
--- a/arch/x86/lib/delay_64.c
+++ b/arch/x86/lib/delay_64.c
@@ -31,14 +31,36 @@
void __delay(unsigned long loops)
{
unsigned bclock, now;
+ int cpu;
- preempt_disable(); /* TSC's are pre-cpu */
+ preempt_disable();
+ cpu = smp_processor_id();
rdtscl(bclock);
- do {
- rep_nop();
+ for (;;) {
rdtscl(now);
+ if ((now - bclock) >= loops)
+ break;
+
+ /* Allow RT tasks to run */
+ preempt_enable();
+ rep_nop();
+ preempt_disable();
+
+ /*
+ * It is possible that we moved to another CPU, and
+ * since TSC's are per-cpu we need to calculate
+ * that. The delay must guarantee that we wait "at
+ * least" the amount of time. Being moved to another
+ * CPU could make the wait longer but we just need to
+ * make sure we waited long enough. Rebalance the
+ * counter for this CPU.
+ */
+ if (unlikely(cpu != smp_processor_id())) {
+ loops -= (now - bclock);
+ cpu = smp_processor_id();
+ rdtscl(bclock);
+ }
}
- while ((now-bclock) < loops);
preempt_enable();
}
EXPORT_SYMBOL(__delay);
diff --git a/arch/x86/math-emu/fpu_entry.c b/arch/x86/math-emu/fpu_entry.c
index 6e38d87..c7b06fe 100644
--- a/arch/x86/math-emu/fpu_entry.c
+++ b/arch/x86/math-emu/fpu_entry.c
@@ -30,6 +30,7 @@
#include <asm/uaccess.h>
#include <asm/desc.h>
#include <asm/user.h>
+#include <asm/i387.h>
#include "fpu_system.h"
#include "fpu_emu.h"
@@ -146,6 +147,13 @@
unsigned long code_limit = 0; /* Initialized to stop compiler warnings */
struct desc_struct code_descriptor;
+ if (!used_math()) {
+ if (init_fpu(current)) {
+ do_group_exit(SIGKILL);
+ return;
+ }
+ }
+
#ifdef RE_ENTRANT_CHECKING
if (emulating) {
printk("ERROR: wm-FPU-emu is not RE-ENTRANT!\n");
@@ -153,11 +161,6 @@
RE_ENTRANT_CHECK_ON;
#endif /* RE_ENTRANT_CHECKING */
- if (!used_math()) {
- finit();
- set_used_math();
- }
-
SETUP_DATA_AREA(arg);
FPU_ORIG_EIP = FPU_EIP;
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index fd7e179..8bcb6f4 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -497,6 +497,11 @@
unsigned long pgd_paddr;
pmd_t *pmd_k;
pte_t *pte_k;
+
+ /* Make sure we are in vmalloc area */
+ if (!(address >= VMALLOC_START && address < VMALLOC_END))
+ return -1;
+
/*
* Synchronize this task's top level page-table
* with the 'reference' page table.
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 32ba13b..819dad9 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -135,7 +135,7 @@
return ptr;
}
-static void
+static __init void
set_pte_phys(unsigned long vaddr, unsigned long phys, pgprot_t prot)
{
pgd_t *pgd;
@@ -206,7 +206,7 @@
pmd_t *last_pmd = pmd + PTRS_PER_PMD;
for (; pmd < last_pmd; pmd++, vaddr += PMD_SIZE) {
- if (!pmd_present(*pmd))
+ if (pmd_none(*pmd))
continue;
if (vaddr < (unsigned long) _text || vaddr > end)
set_pmd(pmd, __pmd(0));
@@ -214,7 +214,7 @@
}
/* NOTE: this is meant to be run only at boot */
-void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
+void __init __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
{
unsigned long address = __fix_to_virt(idx);
@@ -506,7 +506,7 @@
static void __init early_memtest(unsigned long start, unsigned long end)
{
- unsigned long t_start, t_size;
+ u64 t_start, t_size;
unsigned pattern;
if (!memtest_pattern)
@@ -525,8 +525,9 @@
if (t_start + t_size > end)
t_size = end - t_start;
- printk(KERN_CONT "\n %016lx - %016lx pattern %d",
- t_start, t_start + t_size, pattern);
+ printk(KERN_CONT "\n %016llx - %016llx pattern %d",
+ (unsigned long long)t_start,
+ (unsigned long long)t_start + t_size, pattern);
memtest(t_start, t_size, pattern);
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 71bb315..d1b8671 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -300,6 +300,29 @@
}
EXPORT_SYMBOL(ioremap_cache);
+static void __iomem *ioremap_default(resource_size_t phys_addr,
+ unsigned long size)
+{
+ unsigned long flags;
+ void *ret;
+ int err;
+
+ /*
+ * - WB for WB-able memory and no other conflicting mappings
+ * - UC_MINUS for non-WB-able memory with no other conflicting mappings
+ * - Inherit from confliting mappings otherwise
+ */
+ err = reserve_memtype(phys_addr, phys_addr + size, -1, &flags);
+ if (err < 0)
+ return NULL;
+
+ ret = (void *) __ioremap_caller(phys_addr, size, flags,
+ __builtin_return_address(0));
+
+ free_memtype(phys_addr, phys_addr + size);
+ return (void __iomem *)ret;
+}
+
/**
* iounmap - Free a IO remapping
* @addr: virtual address from ioremap_*
@@ -365,7 +388,7 @@
if (page_is_ram(start >> PAGE_SHIFT))
return __va(phys);
- addr = (void *)ioremap(start, PAGE_SIZE);
+ addr = (void *)ioremap_default(start, PAGE_SIZE);
if (addr)
addr = (void *)((unsigned long)addr | (phys & ~PAGE_MASK));
@@ -593,10 +616,11 @@
unsigned long offset;
unsigned int nrpages;
enum fixed_addresses idx;
- unsigned int nesting;
+ int nesting;
nesting = --early_ioremap_nested;
- WARN_ON(nesting < 0);
+ if (WARN_ON(nesting < 0))
+ return;
if (early_ioremap_debug) {
printk(KERN_INFO "early_iounmap(%p, %08lx) [%d]\n", addr,
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index de3a998..06b7a1c 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -34,7 +34,7 @@
printk(KERN_INFO "%s\n", reason);
}
-static int nopat(char *str)
+static int __init nopat(char *str)
{
pat_disable("PAT support disabled.");
return 0;
@@ -151,32 +151,33 @@
unsigned long pat_type;
u8 mtrr_type;
- mtrr_type = mtrr_type_lookup(start, end);
- if (mtrr_type == 0xFF) { /* MTRR not enabled */
- *ret_prot = prot;
- return 0;
- }
- if (mtrr_type == 0xFE) { /* MTRR match error */
- *ret_prot = _PAGE_CACHE_UC;
- return -1;
- }
- if (mtrr_type != MTRR_TYPE_UNCACHABLE &&
- mtrr_type != MTRR_TYPE_WRBACK &&
- mtrr_type != MTRR_TYPE_WRCOMB) { /* MTRR type unhandled */
- *ret_prot = _PAGE_CACHE_UC;
- return -1;
- }
-
pat_type = prot & _PAGE_CACHE_MASK;
prot &= (~_PAGE_CACHE_MASK);
- /* Currently doing intersection by hand. Optimize it later. */
+ /*
+ * We return the PAT request directly for types where PAT takes
+ * precedence with respect to MTRR and for UC_MINUS.
+ * Consistency checks with other PAT requests is done later
+ * while going through memtype list.
+ */
if (pat_type == _PAGE_CACHE_WC) {
*ret_prot = prot | _PAGE_CACHE_WC;
+ return 0;
} else if (pat_type == _PAGE_CACHE_UC_MINUS) {
*ret_prot = prot | _PAGE_CACHE_UC_MINUS;
- } else if (pat_type == _PAGE_CACHE_UC ||
- mtrr_type == MTRR_TYPE_UNCACHABLE) {
+ return 0;
+ } else if (pat_type == _PAGE_CACHE_UC) {
+ *ret_prot = prot | _PAGE_CACHE_UC;
+ return 0;
+ }
+
+ /*
+ * Look for MTRR hint to get the effective type in case where PAT
+ * request is for WB.
+ */
+ mtrr_type = mtrr_type_lookup(start, end);
+
+ if (mtrr_type == MTRR_TYPE_UNCACHABLE) {
*ret_prot = prot | _PAGE_CACHE_UC;
} else if (mtrr_type == MTRR_TYPE_WRCOMB) {
*ret_prot = prot | _PAGE_CACHE_WC;
@@ -233,14 +234,12 @@
if (req_type == -1) {
/*
- * Special case where caller wants to inherit from mtrr or
- * existing pat mapping, defaulting to UC_MINUS in case of
- * no match.
+ * Call mtrr_lookup to get the type hint. This is an
+ * optimization for /dev/mem mmap'ers into WB memory (BIOS
+ * tools and ACPI tools). Use WB request for WB memory and use
+ * UC_MINUS otherwise.
*/
u8 mtrr_type = mtrr_type_lookup(start, end);
- if (mtrr_type == 0xFE) { /* MTRR match error */
- err = -1;
- }
if (mtrr_type == MTRR_TYPE_WRBACK) {
req_type = _PAGE_CACHE_WB;
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 3890234..99649dc 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -97,36 +97,9 @@
return numa_off || acpi_numa < 0;
}
-/*
- * A lot of BIOS fill in 10 (= no distance) everywhere. This messes
- * up the NUMA heuristics which wants the local node to have a smaller
- * distance than the others.
- * Do some quick checks here and only use the SLIT if it passes.
- */
-static __init int slit_valid(struct acpi_table_slit *slit)
-{
- int i, j;
- int d = slit->locality_count;
- for (i = 0; i < d; i++) {
- for (j = 0; j < d; j++) {
- u8 val = slit->entry[d*i + j];
- if (i == j) {
- if (val != LOCAL_DISTANCE)
- return 0;
- } else if (val <= LOCAL_DISTANCE)
- return 0;
- }
- }
- return 1;
-}
-
/* Callback for SLIT parsing */
void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
{
- if (!slit_valid(slit)) {
- printk(KERN_INFO "ACPI: SLIT table looks invalid. Not used.\n");
- return;
- }
acpi_slit = slit;
}
diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c
index e70b9c5..b821f44 100644
--- a/arch/x86/pci/init.c
+++ b/arch/x86/pci/init.c
@@ -15,7 +15,8 @@
pci_mmcfg_early_init();
#ifdef CONFIG_PCI_OLPC
- pci_olpc_init();
+ if (!pci_olpc_init())
+ return 0; /* skip additional checks if it's an XO */
#endif
#ifdef CONFIG_PCI_BIOS
pci_pcbios_init();
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 0908fca..ca8df9c 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -621,6 +621,13 @@
*/
device = PCI_DEVICE_ID_VIA_8235;
break;
+ case PCI_DEVICE_ID_VIA_8237:
+ /**
+ * Asus a7v600 bios wrongly reports 8237
+ * as 586-compatible
+ */
+ device = PCI_DEVICE_ID_VIA_8237;
+ break;
}
}
diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c
index 5e76365..e11e9e8 100644
--- a/arch/x86/pci/olpc.c
+++ b/arch/x86/pci/olpc.c
@@ -302,12 +302,13 @@
.write = pci_olpc_write,
};
-void __init pci_olpc_init(void)
+int __init pci_olpc_init(void)
{
if (!machine_is_olpc() || olpc_has_vsa())
- return;
+ return -ENODEV;
printk(KERN_INFO "PCI: Using configuration type OLPC\n");
raw_pci_ops = &pci_olpc_conf;
is_lx = is_geode_lx();
+ return 0;
}
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index f3972b1..720c4c5 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -101,7 +101,7 @@
extern int pci_direct_probe(void);
extern void pci_direct_init(int type);
extern void pci_pcbios_init(void);
-extern void pci_olpc_init(void);
+extern int pci_olpc_init(void);
/* pci-mmconfig.c */
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index 2e641be..6c388e5 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -5,8 +5,9 @@
config XEN
bool "Xen guest support"
select PARAVIRT
+ select PARAVIRT_CLOCK
depends on X86_32
- depends on X86_CMPXCHG && X86_TSC && !(X86_VISWS || X86_VOYAGER)
+ depends on X86_CMPXCHG && X86_TSC && X86_PAE && !(X86_VISWS || X86_VOYAGER)
help
This is the Linux Xen port. Enabling this will allow the
kernel to boot in a paravirtualized environment under the
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index c8a56e4..f09c1c6 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -785,38 +785,35 @@
static __init void xen_pagetable_setup_start(pgd_t *base)
{
pgd_t *xen_pgd = (pgd_t *)xen_start_info->pt_base;
+ int i;
/* special set_pte for pagetable initialization */
pv_mmu_ops.set_pte = xen_set_pte_init;
init_mm.pgd = base;
/*
- * copy top-level of Xen-supplied pagetable into place. For
- * !PAE we can use this as-is, but for PAE it is a stand-in
- * while we copy the pmd pages.
+ * copy top-level of Xen-supplied pagetable into place. This
+ * is a stand-in while we copy the pmd pages.
*/
memcpy(base, xen_pgd, PTRS_PER_PGD * sizeof(pgd_t));
- if (PTRS_PER_PMD > 1) {
- int i;
- /*
- * For PAE, need to allocate new pmds, rather than
- * share Xen's, since Xen doesn't like pmd's being
- * shared between address spaces.
- */
- for (i = 0; i < PTRS_PER_PGD; i++) {
- if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) {
- pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE);
+ /*
+ * For PAE, need to allocate new pmds, rather than
+ * share Xen's, since Xen doesn't like pmd's being
+ * shared between address spaces.
+ */
+ for (i = 0; i < PTRS_PER_PGD; i++) {
+ if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) {
+ pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE);
- memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]),
- PAGE_SIZE);
+ memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]),
+ PAGE_SIZE);
- make_lowmem_page_readonly(pmd);
+ make_lowmem_page_readonly(pmd);
- set_pgd(&base[i], __pgd(1 + __pa(pmd)));
- } else
- pgd_clear(&base[i]);
- }
+ set_pgd(&base[i], __pgd(1 + __pa(pmd)));
+ } else
+ pgd_clear(&base[i]);
}
/* make sure zero_page is mapped RO so we can use it in pagetables */
@@ -873,17 +870,7 @@
/* Actually pin the pagetable down, but we can't set PG_pinned
yet because the page structures don't exist yet. */
- {
- unsigned level;
-
-#ifdef CONFIG_X86_PAE
- level = MMUEXT_PIN_L3_TABLE;
-#else
- level = MMUEXT_PIN_L2_TABLE;
-#endif
-
- pin_pagetable_pfn(level, PFN_DOWN(__pa(base)));
- }
+ pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(base)));
}
/* This is called once we have the cpu_possible_map */
@@ -1093,7 +1080,6 @@
.make_pte = xen_make_pte,
.make_pgd = xen_make_pgd,
-#ifdef CONFIG_X86_PAE
.set_pte_atomic = xen_set_pte_atomic,
.set_pte_present = xen_set_pte_at,
.set_pud = xen_set_pud,
@@ -1102,7 +1088,6 @@
.make_pmd = xen_make_pmd,
.pmd_val = xen_pmd_val,
-#endif /* PAE */
.activate_mm = xen_activate_mm,
.dup_mmap = xen_dup_mmap,
@@ -1228,6 +1213,11 @@
if (xen_feature(XENFEAT_supervisor_mode_kernel))
pv_info.kernel_rpl = 0;
+ /* Prevent unwanted bits from being set in PTEs. */
+ __supported_pte_mask &= ~_PAGE_GLOBAL;
+ if (!is_initial_xendomain())
+ __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
+
/* set the limit of our address space */
xen_reserve_top();
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 3525ef5..4e527e7 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -179,50 +179,56 @@
preempt_enable();
}
+/* Assume pteval_t is equivalent to all the other *val_t types. */
+static pteval_t pte_mfn_to_pfn(pteval_t val)
+{
+ if (val & _PAGE_PRESENT) {
+ unsigned long mfn = (val & PTE_MASK) >> PAGE_SHIFT;
+ pteval_t flags = val & ~PTE_MASK;
+ val = ((pteval_t)mfn_to_pfn(mfn) << PAGE_SHIFT) | flags;
+ }
+
+ return val;
+}
+
+static pteval_t pte_pfn_to_mfn(pteval_t val)
+{
+ if (val & _PAGE_PRESENT) {
+ unsigned long pfn = (val & PTE_MASK) >> PAGE_SHIFT;
+ pteval_t flags = val & ~PTE_MASK;
+ val = ((pteval_t)pfn_to_mfn(pfn) << PAGE_SHIFT) | flags;
+ }
+
+ return val;
+}
+
pteval_t xen_pte_val(pte_t pte)
{
- pteval_t ret = pte.pte;
-
- if (ret & _PAGE_PRESENT)
- ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
-
- return ret;
+ return pte_mfn_to_pfn(pte.pte);
}
pgdval_t xen_pgd_val(pgd_t pgd)
{
- pgdval_t ret = pgd.pgd;
- if (ret & _PAGE_PRESENT)
- ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
- return ret;
+ return pte_mfn_to_pfn(pgd.pgd);
}
pte_t xen_make_pte(pteval_t pte)
{
- if (pte & _PAGE_PRESENT) {
- pte = phys_to_machine(XPADDR(pte)).maddr;
- pte &= ~(_PAGE_PCD | _PAGE_PWT);
- }
-
- return (pte_t){ .pte = pte };
+ pte = pte_pfn_to_mfn(pte);
+ return native_make_pte(pte);
}
pgd_t xen_make_pgd(pgdval_t pgd)
{
- if (pgd & _PAGE_PRESENT)
- pgd = phys_to_machine(XPADDR(pgd)).maddr;
-
- return (pgd_t){ pgd };
+ pgd = pte_pfn_to_mfn(pgd);
+ return native_make_pgd(pgd);
}
pmdval_t xen_pmd_val(pmd_t pmd)
{
- pmdval_t ret = native_pmd_val(pmd);
- if (ret & _PAGE_PRESENT)
- ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
- return ret;
+ return pte_mfn_to_pfn(pmd.pmd);
}
-#ifdef CONFIG_X86_PAE
+
void xen_set_pud(pud_t *ptr, pud_t val)
{
struct multicall_space mcs;
@@ -267,17 +273,9 @@
pmd_t xen_make_pmd(pmdval_t pmd)
{
- if (pmd & _PAGE_PRESENT)
- pmd = phys_to_machine(XPADDR(pmd)).maddr;
-
+ pmd = pte_pfn_to_mfn(pmd);
return native_make_pmd(pmd);
}
-#else /* !PAE */
-void xen_set_pte(pte_t *ptep, pte_t pte)
-{
- *ptep = pte;
-}
-#endif /* CONFIG_X86_PAE */
/*
(Yet another) pagetable walker. This one is intended for pinning a
@@ -430,8 +428,6 @@
read-only, and can be pinned. */
void xen_pgd_pin(pgd_t *pgd)
{
- unsigned level;
-
xen_mc_batch();
if (pgd_walk(pgd, pin_page, TASK_SIZE)) {
@@ -441,14 +437,7 @@
xen_mc_batch();
}
-#ifdef CONFIG_X86_PAE
- level = MMUEXT_PIN_L3_TABLE;
-#else
- level = MMUEXT_PIN_L2_TABLE;
-#endif
-
- xen_do_pin(level, PFN_DOWN(__pa(pgd)));
-
+ xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd)));
xen_mc_issue(0);
}
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
index b5e189b..5fe961c 100644
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -37,14 +37,13 @@
void xen_pgd_pin(pgd_t *pgd);
//void xen_pgd_unpin(pgd_t *pgd);
-#ifdef CONFIG_X86_PAE
-unsigned long long xen_pte_val(pte_t);
-unsigned long long xen_pmd_val(pmd_t);
-unsigned long long xen_pgd_val(pgd_t);
+pteval_t xen_pte_val(pte_t);
+pmdval_t xen_pmd_val(pmd_t);
+pgdval_t xen_pgd_val(pgd_t);
-pte_t xen_make_pte(unsigned long long);
-pmd_t xen_make_pmd(unsigned long long);
-pgd_t xen_make_pgd(unsigned long long);
+pte_t xen_make_pte(pteval_t);
+pmd_t xen_make_pmd(pmdval_t);
+pgd_t xen_make_pgd(pgdval_t);
void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pteval);
@@ -53,15 +52,4 @@
void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
void xen_pmd_clear(pmd_t *pmdp);
-
-#else
-unsigned long xen_pte_val(pte_t);
-unsigned long xen_pmd_val(pmd_t);
-unsigned long xen_pgd_val(pgd_t);
-
-pte_t xen_make_pte(unsigned long);
-pmd_t xen_make_pmd(unsigned long);
-pgd_t xen_make_pgd(unsigned long);
-#endif
-
#endif /* _XEN_MMU_H */
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index c39e1a5..41e2175 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -12,7 +12,9 @@
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/kernel_stat.h>
+#include <linux/math64.h>
+#include <asm/pvclock.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
@@ -30,17 +32,6 @@
static cycle_t xen_clocksource_read(void);
-/* These are perodically updated in shared_info, and then copied here. */
-struct shadow_time_info {
- u64 tsc_timestamp; /* TSC at last update of time vals. */
- u64 system_timestamp; /* Time, in nanosecs, since boot. */
- u32 tsc_to_nsec_mul;
- int tsc_shift;
- u32 version;
-};
-
-static DEFINE_PER_CPU(struct shadow_time_info, shadow_time);
-
/* runstate info updated by Xen */
static DEFINE_PER_CPU(struct vcpu_runstate_info, runstate);
@@ -150,11 +141,7 @@
if (stolen < 0)
stolen = 0;
- ticks = 0;
- while (stolen >= NS_PER_TICK) {
- ticks++;
- stolen -= NS_PER_TICK;
- }
+ ticks = iter_div_u64_rem(stolen, NS_PER_TICK, &stolen);
__get_cpu_var(residual_stolen) = stolen;
account_steal_time(NULL, ticks);
@@ -166,11 +153,7 @@
if (blocked < 0)
blocked = 0;
- ticks = 0;
- while (blocked >= NS_PER_TICK) {
- ticks++;
- blocked -= NS_PER_TICK;
- }
+ ticks = iter_div_u64_rem(blocked, NS_PER_TICK, &blocked);
__get_cpu_var(residual_blocked) = blocked;
account_steal_time(idle_task(smp_processor_id()), ticks);
}
@@ -218,7 +201,7 @@
unsigned long xen_cpu_khz(void)
{
u64 xen_khz = 1000000ULL << 32;
- const struct vcpu_time_info *info =
+ const struct pvclock_vcpu_time_info *info =
&HYPERVISOR_shared_info->vcpu_info[0].time;
do_div(xen_khz, info->tsc_to_system_mul);
@@ -230,121 +213,26 @@
return xen_khz;
}
-/*
- * Reads a consistent set of time-base values from Xen, into a shadow data
- * area.
- */
-static unsigned get_time_values_from_xen(void)
-{
- struct vcpu_time_info *src;
- struct shadow_time_info *dst;
-
- /* src is shared memory with the hypervisor, so we need to
- make sure we get a consistent snapshot, even in the face of
- being preempted. */
- src = &__get_cpu_var(xen_vcpu)->time;
- dst = &__get_cpu_var(shadow_time);
-
- do {
- dst->version = src->version;
- rmb(); /* fetch version before data */
- dst->tsc_timestamp = src->tsc_timestamp;
- dst->system_timestamp = src->system_time;
- dst->tsc_to_nsec_mul = src->tsc_to_system_mul;
- dst->tsc_shift = src->tsc_shift;
- rmb(); /* test version after fetching data */
- } while ((src->version & 1) | (dst->version ^ src->version));
-
- return dst->version;
-}
-
-/*
- * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
- * yielding a 64-bit result.
- */
-static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
-{
- u64 product;
-#ifdef __i386__
- u32 tmp1, tmp2;
-#endif
-
- if (shift < 0)
- delta >>= -shift;
- else
- delta <<= shift;
-
-#ifdef __i386__
- __asm__ (
- "mul %5 ; "
- "mov %4,%%eax ; "
- "mov %%edx,%4 ; "
- "mul %5 ; "
- "xor %5,%5 ; "
- "add %4,%%eax ; "
- "adc %5,%%edx ; "
- : "=A" (product), "=r" (tmp1), "=r" (tmp2)
- : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
-#elif __x86_64__
- __asm__ (
- "mul %%rdx ; shrd $32,%%rdx,%%rax"
- : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
-#else
-#error implement me!
-#endif
-
- return product;
-}
-
-static u64 get_nsec_offset(struct shadow_time_info *shadow)
-{
- u64 now, delta;
- now = native_read_tsc();
- delta = now - shadow->tsc_timestamp;
- return scale_delta(delta, shadow->tsc_to_nsec_mul, shadow->tsc_shift);
-}
-
static cycle_t xen_clocksource_read(void)
{
- struct shadow_time_info *shadow = &get_cpu_var(shadow_time);
+ struct pvclock_vcpu_time_info *src;
cycle_t ret;
- unsigned version;
- do {
- version = get_time_values_from_xen();
- barrier();
- ret = shadow->system_timestamp + get_nsec_offset(shadow);
- barrier();
- } while (version != __get_cpu_var(xen_vcpu)->time.version);
-
- put_cpu_var(shadow_time);
-
+ src = &get_cpu_var(xen_vcpu)->time;
+ ret = pvclock_clocksource_read(src);
+ put_cpu_var(xen_vcpu);
return ret;
}
static void xen_read_wallclock(struct timespec *ts)
{
- const struct shared_info *s = HYPERVISOR_shared_info;
- u32 version;
- u64 delta;
- struct timespec now;
+ struct shared_info *s = HYPERVISOR_shared_info;
+ struct pvclock_wall_clock *wall_clock = &(s->wc);
+ struct pvclock_vcpu_time_info *vcpu_time;
- /* get wallclock at system boot */
- do {
- version = s->wc_version;
- rmb(); /* fetch version before time */
- now.tv_sec = s->wc_sec;
- now.tv_nsec = s->wc_nsec;
- rmb(); /* fetch time before checking version */
- } while ((s->wc_version & 1) | (version ^ s->wc_version));
-
- delta = xen_clocksource_read(); /* time since system boot */
- delta += now.tv_sec * (u64)NSEC_PER_SEC + now.tv_nsec;
-
- now.tv_nsec = do_div(delta, NSEC_PER_SEC);
- now.tv_sec = delta;
-
- set_normalized_timespec(ts, now.tv_sec, now.tv_nsec);
+ vcpu_time = &get_cpu_var(xen_vcpu)->time;
+ pvclock_read_wallclock(wall_clock, vcpu_time, ts);
+ put_cpu_var(xen_vcpu);
}
unsigned long xen_get_wallclock(void)
@@ -352,7 +240,6 @@
struct timespec ts;
xen_read_wallclock(&ts);
-
return ts.tv_sec;
}
@@ -576,8 +463,6 @@
{
int cpu = smp_processor_id();
- get_time_values_from_xen();
-
clocksource_register(&xen_clocksource);
if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL) == 0) {
diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
index 288d587..6ec3b4f 100644
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -17,7 +17,7 @@
__FINIT
-.pushsection .bss.page_aligned
+.pushsection .text
.align PAGE_SIZE_asm
ENTRY(hypercall_page)
.skip 0x1000
@@ -30,11 +30,7 @@
ELFNOTE(Xen, XEN_ELFNOTE_ENTRY, .long startup_xen)
ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, .long hypercall_page)
ELFNOTE(Xen, XEN_ELFNOTE_FEATURES, .asciz "!writable_page_tables|pae_pgdir_above_4gb")
-#ifdef CONFIG_X86_PAE
ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "yes")
-#else
- ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "no")
-#endif
ELFNOTE(Xen, XEN_ELFNOTE_LOADER, .asciz "generic")
#endif /*CONFIG_XEN */
diff --git a/block/Kconfig b/block/Kconfig
index 3e97f2b..1ab7c15 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -81,6 +81,18 @@
If unsure, say N.
+config BLK_DEV_INTEGRITY
+ bool "Block layer data integrity support"
+ ---help---
+ Some storage devices allow extra information to be
+ stored/retrieved to help protect the data. The block layer
+ data integrity option provides hooks which can be used by
+ filesystems to ensure better data integrity.
+
+ Say yes here if you have a storage device that provides the
+ T10/SCSI Data Integrity Field or the T13/ATA External Path
+ Protection. If in doubt, say N.
+
endif # BLOCK
config BLOCK_COMPAT
diff --git a/block/Makefile b/block/Makefile
index 5a43c7d..208000b 100644
--- a/block/Makefile
+++ b/block/Makefile
@@ -4,7 +4,8 @@
obj-$(CONFIG_BLOCK) := elevator.o blk-core.o blk-tag.o blk-sysfs.o \
blk-barrier.o blk-settings.o blk-ioc.o blk-map.o \
- blk-exec.o blk-merge.o ioctl.o genhd.o scsi_ioctl.o
+ blk-exec.o blk-merge.o ioctl.o genhd.o scsi_ioctl.o \
+ cmd-filter.o
obj-$(CONFIG_BLK_DEV_BSG) += bsg.o
obj-$(CONFIG_IOSCHED_NOOP) += noop-iosched.o
@@ -14,3 +15,4 @@
obj-$(CONFIG_BLK_DEV_IO_TRACE) += blktrace.o
obj-$(CONFIG_BLOCK_COMPAT) += compat_ioctl.o
+obj-$(CONFIG_BLK_DEV_INTEGRITY) += blk-integrity.o
diff --git a/block/as-iosched.c b/block/as-iosched.c
index 8c39467..9735acb 100644
--- a/block/as-iosched.c
+++ b/block/as-iosched.c
@@ -151,6 +151,7 @@
static DEFINE_PER_CPU(unsigned long, ioc_count);
static struct completion *ioc_gone;
+static DEFINE_SPINLOCK(ioc_gone_lock);
static void as_move_to_dispatch(struct as_data *ad, struct request *rq);
static void as_antic_stop(struct as_data *ad);
@@ -164,8 +165,19 @@
{
kfree(aic);
elv_ioc_count_dec(ioc_count);
- if (ioc_gone && !elv_ioc_count_read(ioc_count))
- complete(ioc_gone);
+ if (ioc_gone) {
+ /*
+ * AS scheduler is exiting, grab exit lock and check
+ * the pending io context count. If it hits zero,
+ * complete ioc_gone and set it back to NULL.
+ */
+ spin_lock(&ioc_gone_lock);
+ if (ioc_gone && !elv_ioc_count_read(ioc_count)) {
+ complete(ioc_gone);
+ ioc_gone = NULL;
+ }
+ spin_unlock(&ioc_gone_lock);
+ }
}
static void as_trim(struct io_context *ioc)
@@ -831,6 +843,8 @@
}
if (ad->changed_batch && ad->nr_dispatched == 1) {
+ ad->current_batch_expires = jiffies +
+ ad->batch_expire[ad->batch_data_dir];
kblockd_schedule_work(&ad->antic_work);
ad->changed_batch = 0;
@@ -1491,7 +1505,7 @@
/* ioc_gone's update must be visible before reading ioc_count */
smp_wmb();
if (elv_ioc_count_read(ioc_count))
- wait_for_completion(ioc_gone);
+ wait_for_completion(&all_gone);
synchronize_rcu();
}
diff --git a/block/blk-core.c b/block/blk-core.c
index 1905aab..dbc7f42 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -143,6 +143,10 @@
bio->bi_size -= nbytes;
bio->bi_sector += (nbytes >> 9);
+
+ if (bio_integrity(bio))
+ bio_integrity_advance(bio, nbytes);
+
if (bio->bi_size == 0)
bio_endio(bio, error);
} else {
@@ -201,8 +205,7 @@
if (blk_queue_stopped(q))
return;
- if (!test_bit(QUEUE_FLAG_PLUGGED, &q->queue_flags)) {
- __set_bit(QUEUE_FLAG_PLUGGED, &q->queue_flags);
+ if (!queue_flag_test_and_set(QUEUE_FLAG_PLUGGED, q)) {
mod_timer(&q->unplug_timer, jiffies + q->unplug_delay);
blk_add_trace_generic(q, NULL, 0, BLK_TA_PLUG);
}
@@ -217,10 +220,9 @@
{
WARN_ON(!irqs_disabled());
- if (!test_bit(QUEUE_FLAG_PLUGGED, &q->queue_flags))
+ if (!queue_flag_test_and_clear(QUEUE_FLAG_PLUGGED, q))
return 0;
- queue_flag_clear(QUEUE_FLAG_PLUGGED, q);
del_timer(&q->unplug_timer);
return 1;
}
@@ -324,8 +326,7 @@
* one level of recursion is ok and is much faster than kicking
* the unplug handling
*/
- if (!test_bit(QUEUE_FLAG_REENTER, &q->queue_flags)) {
- queue_flag_set(QUEUE_FLAG_REENTER, q);
+ if (!queue_flag_test_and_set(QUEUE_FLAG_REENTER, q)) {
q->request_fn(q);
queue_flag_clear(QUEUE_FLAG_REENTER, q);
} else {
@@ -390,8 +391,7 @@
* handling reinvoke the handler shortly if we already got there.
*/
if (!elv_queue_empty(q)) {
- if (!test_bit(QUEUE_FLAG_REENTER, &q->queue_flags)) {
- queue_flag_set(QUEUE_FLAG_REENTER, q);
+ if (!queue_flag_test_and_set(QUEUE_FLAG_REENTER, q)) {
q->request_fn(q);
queue_flag_clear(QUEUE_FLAG_REENTER, q);
} else {
@@ -1381,6 +1381,9 @@
*/
blk_partition_remap(bio);
+ if (bio_integrity_enabled(bio) && bio_integrity_prep(bio))
+ goto end_io;
+
if (old_sector != -1)
blk_add_trace_remap(q, bio, old_dev, bio->bi_sector,
old_sector);
diff --git a/block/blk-integrity.c b/block/blk-integrity.c
new file mode 100644
index 0000000..3f1a847
--- /dev/null
+++ b/block/blk-integrity.c
@@ -0,0 +1,381 @@
+/*
+ * blk-integrity.c - Block layer data integrity extensions
+ *
+ * Copyright (C) 2007, 2008 Oracle Corporation
+ * Written by: Martin K. Petersen <martin.petersen@oracle.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
+ * USA.
+ *
+ */
+
+#include <linux/blkdev.h>
+#include <linux/mempool.h>
+#include <linux/bio.h>
+#include <linux/scatterlist.h>
+
+#include "blk.h"
+
+static struct kmem_cache *integrity_cachep;
+
+/**
+ * blk_rq_count_integrity_sg - Count number of integrity scatterlist elements
+ * @rq: request with integrity metadata attached
+ *
+ * Description: Returns the number of elements required in a
+ * scatterlist corresponding to the integrity metadata in a request.
+ */
+int blk_rq_count_integrity_sg(struct request *rq)
+{
+ struct bio_vec *iv, *ivprv;
+ struct req_iterator iter;
+ unsigned int segments;
+
+ ivprv = NULL;
+ segments = 0;
+
+ rq_for_each_integrity_segment(iv, rq, iter) {
+
+ if (!ivprv || !BIOVEC_PHYS_MERGEABLE(ivprv, iv))
+ segments++;
+
+ ivprv = iv;
+ }
+
+ return segments;
+}
+EXPORT_SYMBOL(blk_rq_count_integrity_sg);
+
+/**
+ * blk_rq_map_integrity_sg - Map integrity metadata into a scatterlist
+ * @rq: request with integrity metadata attached
+ * @sglist: target scatterlist
+ *
+ * Description: Map the integrity vectors in request into a
+ * scatterlist. The scatterlist must be big enough to hold all
+ * elements. I.e. sized using blk_rq_count_integrity_sg().
+ */
+int blk_rq_map_integrity_sg(struct request *rq, struct scatterlist *sglist)
+{
+ struct bio_vec *iv, *ivprv;
+ struct req_iterator iter;
+ struct scatterlist *sg;
+ unsigned int segments;
+
+ ivprv = NULL;
+ sg = NULL;
+ segments = 0;
+
+ rq_for_each_integrity_segment(iv, rq, iter) {
+
+ if (ivprv) {
+ if (!BIOVEC_PHYS_MERGEABLE(ivprv, iv))
+ goto new_segment;
+
+ sg->length += iv->bv_len;
+ } else {
+new_segment:
+ if (!sg)
+ sg = sglist;
+ else {
+ sg->page_link &= ~0x02;
+ sg = sg_next(sg);
+ }
+
+ sg_set_page(sg, iv->bv_page, iv->bv_len, iv->bv_offset);
+ segments++;
+ }
+
+ ivprv = iv;
+ }
+
+ if (sg)
+ sg_mark_end(sg);
+
+ return segments;
+}
+EXPORT_SYMBOL(blk_rq_map_integrity_sg);
+
+/**
+ * blk_integrity_compare - Compare integrity profile of two block devices
+ * @b1: Device to compare
+ * @b2: Device to compare
+ *
+ * Description: Meta-devices like DM and MD need to verify that all
+ * sub-devices use the same integrity format before advertising to
+ * upper layers that they can send/receive integrity metadata. This
+ * function can be used to check whether two block devices have
+ * compatible integrity formats.
+ */
+int blk_integrity_compare(struct block_device *bd1, struct block_device *bd2)
+{
+ struct blk_integrity *b1 = bd1->bd_disk->integrity;
+ struct blk_integrity *b2 = bd2->bd_disk->integrity;
+
+ BUG_ON(bd1->bd_disk == NULL);
+ BUG_ON(bd2->bd_disk == NULL);
+
+ if (!b1 || !b2)
+ return 0;
+
+ if (b1->sector_size != b2->sector_size) {
+ printk(KERN_ERR "%s: %s/%s sector sz %u != %u\n", __func__,
+ bd1->bd_disk->disk_name, bd2->bd_disk->disk_name,
+ b1->sector_size, b2->sector_size);
+ return -1;
+ }
+
+ if (b1->tuple_size != b2->tuple_size) {
+ printk(KERN_ERR "%s: %s/%s tuple sz %u != %u\n", __func__,
+ bd1->bd_disk->disk_name, bd2->bd_disk->disk_name,
+ b1->tuple_size, b2->tuple_size);
+ return -1;
+ }
+
+ if (b1->tag_size && b2->tag_size && (b1->tag_size != b2->tag_size)) {
+ printk(KERN_ERR "%s: %s/%s tag sz %u != %u\n", __func__,
+ bd1->bd_disk->disk_name, bd2->bd_disk->disk_name,
+ b1->tag_size, b2->tag_size);
+ return -1;
+ }
+
+ if (strcmp(b1->name, b2->name)) {
+ printk(KERN_ERR "%s: %s/%s type %s != %s\n", __func__,
+ bd1->bd_disk->disk_name, bd2->bd_disk->disk_name,
+ b1->name, b2->name);
+ return -1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(blk_integrity_compare);
+
+struct integrity_sysfs_entry {
+ struct attribute attr;
+ ssize_t (*show)(struct blk_integrity *, char *);
+ ssize_t (*store)(struct blk_integrity *, const char *, size_t);
+};
+
+static ssize_t integrity_attr_show(struct kobject *kobj, struct attribute *attr,
+ char *page)
+{
+ struct blk_integrity *bi =
+ container_of(kobj, struct blk_integrity, kobj);
+ struct integrity_sysfs_entry *entry =
+ container_of(attr, struct integrity_sysfs_entry, attr);
+
+ return entry->show(bi, page);
+}
+
+static ssize_t integrity_attr_store(struct kobject *kobj,
+ struct attribute *attr, const char *page,
+ size_t count)
+{
+ struct blk_integrity *bi =
+ container_of(kobj, struct blk_integrity, kobj);
+ struct integrity_sysfs_entry *entry =
+ container_of(attr, struct integrity_sysfs_entry, attr);
+ ssize_t ret = 0;
+
+ if (entry->store)
+ ret = entry->store(bi, page, count);
+
+ return ret;
+}
+
+static ssize_t integrity_format_show(struct blk_integrity *bi, char *page)
+{
+ if (bi != NULL && bi->name != NULL)
+ return sprintf(page, "%s\n", bi->name);
+ else
+ return sprintf(page, "none\n");
+}
+
+static ssize_t integrity_tag_size_show(struct blk_integrity *bi, char *page)
+{
+ if (bi != NULL)
+ return sprintf(page, "%u\n", bi->tag_size);
+ else
+ return sprintf(page, "0\n");
+}
+
+static ssize_t integrity_read_store(struct blk_integrity *bi,
+ const char *page, size_t count)
+{
+ char *p = (char *) page;
+ unsigned long val = simple_strtoul(p, &p, 10);
+
+ if (val)
+ bi->flags |= INTEGRITY_FLAG_READ;
+ else
+ bi->flags &= ~INTEGRITY_FLAG_READ;
+
+ return count;
+}
+
+static ssize_t integrity_read_show(struct blk_integrity *bi, char *page)
+{
+ return sprintf(page, "%d\n", (bi->flags & INTEGRITY_FLAG_READ) != 0);
+}
+
+static ssize_t integrity_write_store(struct blk_integrity *bi,
+ const char *page, size_t count)
+{
+ char *p = (char *) page;
+ unsigned long val = simple_strtoul(p, &p, 10);
+
+ if (val)
+ bi->flags |= INTEGRITY_FLAG_WRITE;
+ else
+ bi->flags &= ~INTEGRITY_FLAG_WRITE;
+
+ return count;
+}
+
+static ssize_t integrity_write_show(struct blk_integrity *bi, char *page)
+{
+ return sprintf(page, "%d\n", (bi->flags & INTEGRITY_FLAG_WRITE) != 0);
+}
+
+static struct integrity_sysfs_entry integrity_format_entry = {
+ .attr = { .name = "format", .mode = S_IRUGO },
+ .show = integrity_format_show,
+};
+
+static struct integrity_sysfs_entry integrity_tag_size_entry = {
+ .attr = { .name = "tag_size", .mode = S_IRUGO },
+ .show = integrity_tag_size_show,
+};
+
+static struct integrity_sysfs_entry integrity_read_entry = {
+ .attr = { .name = "read_verify", .mode = S_IRUGO | S_IWUSR },
+ .show = integrity_read_show,
+ .store = integrity_read_store,
+};
+
+static struct integrity_sysfs_entry integrity_write_entry = {
+ .attr = { .name = "write_generate", .mode = S_IRUGO | S_IWUSR },
+ .show = integrity_write_show,
+ .store = integrity_write_store,
+};
+
+static struct attribute *integrity_attrs[] = {
+ &integrity_format_entry.attr,
+ &integrity_tag_size_entry.attr,
+ &integrity_read_entry.attr,
+ &integrity_write_entry.attr,
+ NULL,
+};
+
+static struct sysfs_ops integrity_ops = {
+ .show = &integrity_attr_show,
+ .store = &integrity_attr_store,
+};
+
+static int __init blk_dev_integrity_init(void)
+{
+ integrity_cachep = kmem_cache_create("blkdev_integrity",
+ sizeof(struct blk_integrity),
+ 0, SLAB_PANIC, NULL);
+ return 0;
+}
+subsys_initcall(blk_dev_integrity_init);
+
+static void blk_integrity_release(struct kobject *kobj)
+{
+ struct blk_integrity *bi =
+ container_of(kobj, struct blk_integrity, kobj);
+
+ kmem_cache_free(integrity_cachep, bi);
+}
+
+static struct kobj_type integrity_ktype = {
+ .default_attrs = integrity_attrs,
+ .sysfs_ops = &integrity_ops,
+ .release = blk_integrity_release,
+};
+
+/**
+ * blk_integrity_register - Register a gendisk as being integrity-capable
+ * @disk: struct gendisk pointer to make integrity-aware
+ * @template: integrity profile
+ *
+ * Description: When a device needs to advertise itself as being able
+ * to send/receive integrity metadata it must use this function to
+ * register the capability with the block layer. The template is a
+ * blk_integrity struct with values appropriate for the underlying
+ * hardware. See Documentation/block/data-integrity.txt.
+ */
+int blk_integrity_register(struct gendisk *disk, struct blk_integrity *template)
+{
+ struct blk_integrity *bi;
+
+ BUG_ON(disk == NULL);
+ BUG_ON(template == NULL);
+
+ if (disk->integrity == NULL) {
+ bi = kmem_cache_alloc(integrity_cachep,
+ GFP_KERNEL | __GFP_ZERO);
+ if (!bi)
+ return -1;
+
+ if (kobject_init_and_add(&bi->kobj, &integrity_ktype,
+ &disk->dev.kobj, "%s", "integrity")) {
+ kmem_cache_free(integrity_cachep, bi);
+ return -1;
+ }
+
+ kobject_uevent(&bi->kobj, KOBJ_ADD);
+
+ bi->flags |= INTEGRITY_FLAG_READ | INTEGRITY_FLAG_WRITE;
+ bi->sector_size = disk->queue->hardsect_size;
+ disk->integrity = bi;
+ } else
+ bi = disk->integrity;
+
+ /* Use the provided profile as template */
+ bi->name = template->name;
+ bi->generate_fn = template->generate_fn;
+ bi->verify_fn = template->verify_fn;
+ bi->tuple_size = template->tuple_size;
+ bi->set_tag_fn = template->set_tag_fn;
+ bi->get_tag_fn = template->get_tag_fn;
+ bi->tag_size = template->tag_size;
+
+ return 0;
+}
+EXPORT_SYMBOL(blk_integrity_register);
+
+/**
+ * blk_integrity_unregister - Remove block integrity profile
+ * @disk: disk whose integrity profile to deallocate
+ *
+ * Description: This function frees all memory used by the block
+ * integrity profile. To be called at device teardown.
+ */
+void blk_integrity_unregister(struct gendisk *disk)
+{
+ struct blk_integrity *bi;
+
+ if (!disk || !disk->integrity)
+ return;
+
+ bi = disk->integrity;
+
+ kobject_uevent(&bi->kobj, KOBJ_REMOVE);
+ kobject_del(&bi->kobj);
+ kobject_put(&disk->dev.kobj);
+ kmem_cache_free(integrity_cachep, bi);
+}
+EXPORT_SYMBOL(blk_integrity_unregister);
diff --git a/block/blk-map.c b/block/blk-map.c
index 0b1af5a..ddd96fb 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -210,6 +210,7 @@
if (!bio_flagged(bio, BIO_USER_MAPPED))
rq->cmd_flags |= REQ_COPY_USER;
+ blk_queue_bounce(q, &bio);
bio_get(bio);
blk_rq_bio_prep(q, rq, bio);
rq->buffer = rq->data = NULL;
@@ -268,6 +269,7 @@
int reading = rq_data_dir(rq) == READ;
int do_copy = 0;
struct bio *bio;
+ unsigned long stack_mask = ~(THREAD_SIZE - 1);
if (len > (q->max_hw_sectors << 9))
return -EINVAL;
@@ -278,6 +280,10 @@
alignment = queue_dma_alignment(q) | q->dma_pad_mask;
do_copy = ((kaddr & alignment) || (len & alignment));
+ if (!((kaddr & stack_mask) ^
+ ((unsigned long)current->stack & stack_mask)))
+ do_copy = 1;
+
if (do_copy)
bio = bio_copy_kern(q, kbuf, len, gfp_mask, reading);
else
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 651136a..5efc9e7 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -441,6 +441,9 @@
|| next->special)
return 0;
+ if (blk_integrity_rq(req) != blk_integrity_rq(next))
+ return 0;
+
/*
* If we are allowed to merge, then append bio list
* from next to rq and release next. merge_requests_fn
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 8dd8641..dfc7701 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -302,11 +302,10 @@
* @q: the request queue for the device
* @mask: pad mask
*
- * Set pad mask. Direct IO requests are padded to the mask specified.
+ * Set dma pad mask.
*
- * Appending pad buffer to a request modifies ->data_len such that it
- * includes the pad buffer. The original requested data length can be
- * obtained using blk_rq_raw_data_len().
+ * Appending pad buffer to a request modifies the last entry of a
+ * scatter list such that it includes the pad buffer.
**/
void blk_queue_dma_pad(struct request_queue *q, unsigned int mask)
{
@@ -315,6 +314,23 @@
EXPORT_SYMBOL(blk_queue_dma_pad);
/**
+ * blk_queue_update_dma_pad - update pad mask
+ * @q: the request queue for the device
+ * @mask: pad mask
+ *
+ * Update dma pad mask.
+ *
+ * Appending pad buffer to a request modifies the last entry of a
+ * scatter list such that it includes the pad buffer.
+ **/
+void blk_queue_update_dma_pad(struct request_queue *q, unsigned int mask)
+{
+ if (mask > q->dma_pad_mask)
+ q->dma_pad_mask = mask;
+}
+EXPORT_SYMBOL(blk_queue_update_dma_pad);
+
+/**
* blk_queue_dma_drain - Set up a drain buffer for excess dma.
* @q: the request queue for the device
* @dma_drain_needed: fn which returns non-zero if drain is necessary
diff --git a/block/blk.h b/block/blk.h
index 59776ab..c79f30e 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -51,4 +51,12 @@
return q->nr_congestion_off;
}
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+
+#define rq_for_each_integrity_segment(bvl, _rq, _iter) \
+ __rq_for_each_bio(_iter.bio, _rq) \
+ bip_for_each_vec(bvl, _iter.bio->bi_integrity, _iter.i)
+
+#endif /* BLK_DEV_INTEGRITY */
+
#endif
diff --git a/block/blktrace.c b/block/blktrace.c
index 7ae87cc..eb9651c 100644
--- a/block/blktrace.c
+++ b/block/blktrace.c
@@ -79,16 +79,17 @@
{
int n;
va_list args;
+ unsigned long flags;
char *buf;
- preempt_disable();
+ local_irq_save(flags);
buf = per_cpu_ptr(bt->msg_data, smp_processor_id());
va_start(args, fmt);
n = vscnprintf(buf, BLK_TN_MAX_MSG, fmt, args);
va_end(args);
trace_note(bt, 0, BLK_TN_MESSAGE, buf, n);
- preempt_enable();
+ local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(__trace_note_message);
@@ -158,10 +159,7 @@
/*
* A word about the locking here - we disable interrupts to reserve
* some space in the relay per-cpu buffer, to prevent an irq
- * from coming in and stepping on our toes. Once reserved, it's
- * enough to get preemption disabled to prevent read of this data
- * before we are through filling it. get_cpu()/put_cpu() does this
- * for us
+ * from coming in and stepping on our toes.
*/
local_irq_save(flags);
@@ -246,6 +244,7 @@
static void blk_trace_cleanup(struct blk_trace *bt)
{
relay_close(bt->rchan);
+ debugfs_remove(bt->msg_file);
debugfs_remove(bt->dropped_file);
blk_remove_tree(bt->dir);
free_percpu(bt->sequence);
@@ -293,6 +292,44 @@
.read = blk_dropped_read,
};
+static int blk_msg_open(struct inode *inode, struct file *filp)
+{
+ filp->private_data = inode->i_private;
+
+ return 0;
+}
+
+static ssize_t blk_msg_write(struct file *filp, const char __user *buffer,
+ size_t count, loff_t *ppos)
+{
+ char *msg;
+ struct blk_trace *bt;
+
+ if (count > BLK_TN_MAX_MSG)
+ return -EINVAL;
+
+ msg = kmalloc(count, GFP_KERNEL);
+ if (msg == NULL)
+ return -ENOMEM;
+
+ if (copy_from_user(msg, buffer, count)) {
+ kfree(msg);
+ return -EFAULT;
+ }
+
+ bt = filp->private_data;
+ __trace_note_message(bt, "%s", msg);
+ kfree(msg);
+
+ return count;
+}
+
+static const struct file_operations blk_msg_fops = {
+ .owner = THIS_MODULE,
+ .open = blk_msg_open,
+ .write = blk_msg_write,
+};
+
/*
* Keep track of how many times we encountered a full subbuffer, to aid
* the user space app in telling how many lost events there were.
@@ -382,6 +419,10 @@
if (!bt->dropped_file)
goto err;
+ bt->msg_file = debugfs_create_file("msg", 0222, dir, bt, &blk_msg_fops);
+ if (!bt->msg_file)
+ goto err;
+
bt->rchan = relay_open("trace", dir, buts->buf_size,
buts->buf_nr, &blk_relay_callbacks, bt);
if (!bt->rchan)
@@ -411,6 +452,8 @@
if (dir)
blk_remove_tree(dir);
if (bt) {
+ if (bt->msg_file)
+ debugfs_remove(bt->msg_file);
if (bt->dropped_file)
debugfs_remove(bt->dropped_file);
free_percpu(bt->sequence);
diff --git a/block/bsg.c b/block/bsg.c
index f0b7cd3..93e757d 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -44,11 +44,12 @@
char name[BUS_ID_SIZE];
int max_queue;
unsigned long flags;
+ struct blk_scsi_cmd_filter *cmd_filter;
+ mode_t *f_mode;
};
enum {
BSG_F_BLOCK = 1,
- BSG_F_WRITE_PERM = 2,
};
#define BSG_DEFAULT_CMDS 64
@@ -172,7 +173,7 @@
}
static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq,
- struct sg_io_v4 *hdr, int has_write_perm)
+ struct sg_io_v4 *hdr, struct bsg_device *bd)
{
if (hdr->request_len > BLK_MAX_CDB) {
rq->cmd = kzalloc(hdr->request_len, GFP_KERNEL);
@@ -185,7 +186,8 @@
return -EFAULT;
if (hdr->subprotocol == BSG_SUB_PROTOCOL_SCSI_CMD) {
- if (blk_verify_command(rq->cmd, has_write_perm))
+ if (blk_cmd_filter_verify_command(bd->cmd_filter, rq->cmd,
+ bd->f_mode))
return -EPERM;
} else if (!capable(CAP_SYS_RAWIO))
return -EPERM;
@@ -263,8 +265,7 @@
rq = blk_get_request(q, rw, GFP_KERNEL);
if (!rq)
return ERR_PTR(-ENOMEM);
- ret = blk_fill_sgv4_hdr_rq(q, rq, hdr, test_bit(BSG_F_WRITE_PERM,
- &bd->flags));
+ ret = blk_fill_sgv4_hdr_rq(q, rq, hdr, bd);
if (ret)
goto out;
@@ -566,12 +567,23 @@
set_bit(BSG_F_BLOCK, &bd->flags);
}
-static inline void bsg_set_write_perm(struct bsg_device *bd, struct file *file)
+static void bsg_set_cmd_filter(struct bsg_device *bd,
+ struct file *file)
{
- if (file->f_mode & FMODE_WRITE)
- set_bit(BSG_F_WRITE_PERM, &bd->flags);
- else
- clear_bit(BSG_F_WRITE_PERM, &bd->flags);
+ struct inode *inode;
+ struct gendisk *disk;
+
+ if (!file)
+ return;
+
+ inode = file->f_dentry->d_inode;
+ if (!inode)
+ return;
+
+ disk = inode->i_bdev->bd_disk;
+
+ bd->cmd_filter = &disk->cmd_filter;
+ bd->f_mode = &file->f_mode;
}
/*
@@ -595,6 +607,8 @@
dprintk("%s: read %Zd bytes\n", bd->name, count);
bsg_set_block(bd, file);
+ bsg_set_cmd_filter(bd, file);
+
bytes_read = 0;
ret = __bsg_read(buf, count, bd, NULL, &bytes_read);
*ppos = bytes_read;
@@ -668,7 +682,7 @@
dprintk("%s: write %Zd bytes\n", bd->name, count);
bsg_set_block(bd, file);
- bsg_set_write_perm(bd, file);
+ bsg_set_cmd_filter(bd, file);
bytes_written = 0;
ret = __bsg_write(bd, buf, count, &bytes_written);
@@ -709,11 +723,12 @@
{
struct bsg_class_device *bcd =
container_of(kref, struct bsg_class_device, ref);
+ struct device *parent = bcd->parent;
if (bcd->release)
bcd->release(bcd->parent);
- put_device(bcd->parent);
+ put_device(parent);
}
static int bsg_put_device(struct bsg_device *bd)
@@ -771,7 +786,9 @@
}
bd->queue = rq;
+
bsg_set_block(bd, file);
+ bsg_set_cmd_filter(bd, file);
atomic_set(&bd->ref_count, 1);
mutex_lock(&bsg_mutex);
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index d01b411..1e2aff8 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -11,6 +11,7 @@
#include <linux/elevator.h>
#include <linux/rbtree.h>
#include <linux/ioprio.h>
+#include <linux/blktrace_api.h>
/*
* tunables
@@ -41,13 +42,14 @@
#define RQ_CIC(rq) \
((struct cfq_io_context *) (rq)->elevator_private)
-#define RQ_CFQQ(rq) ((rq)->elevator_private2)
+#define RQ_CFQQ(rq) (struct cfq_queue *) ((rq)->elevator_private2)
static struct kmem_cache *cfq_pool;
static struct kmem_cache *cfq_ioc_pool;
static DEFINE_PER_CPU(unsigned long, ioc_count);
static struct completion *ioc_gone;
+static DEFINE_SPINLOCK(ioc_gone_lock);
#define CFQ_PRIO_LISTS IOPRIO_BE_NR
#define cfq_class_idle(cfqq) ((cfqq)->ioprio_class == IOPRIO_CLASS_IDLE)
@@ -155,6 +157,7 @@
unsigned short ioprio, org_ioprio;
unsigned short ioprio_class, org_ioprio_class;
+ pid_t pid;
};
enum cfqq_state_flags {
@@ -198,6 +201,11 @@
CFQ_CFQQ_FNS(sync);
#undef CFQ_CFQQ_FNS
+#define cfq_log_cfqq(cfqd, cfqq, fmt, args...) \
+ blk_add_trace_msg((cfqd)->queue, "cfq%d " fmt, (cfqq)->pid, ##args)
+#define cfq_log(cfqd, fmt, args...) \
+ blk_add_trace_msg((cfqd)->queue, "cfq " fmt, ##args)
+
static void cfq_dispatch_insert(struct request_queue *, struct request *);
static struct cfq_queue *cfq_get_queue(struct cfq_data *, int,
struct io_context *, gfp_t);
@@ -234,8 +242,10 @@
*/
static inline void cfq_schedule_dispatch(struct cfq_data *cfqd)
{
- if (cfqd->busy_queues)
+ if (cfqd->busy_queues) {
+ cfq_log(cfqd, "schedule dispatch");
kblockd_schedule_work(&cfqd->unplug_work);
+ }
}
static int cfq_queue_empty(struct request_queue *q)
@@ -270,6 +280,7 @@
cfq_set_prio_slice(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
cfqq->slice_end = cfq_prio_to_slice(cfqd, cfqq) + jiffies;
+ cfq_log_cfqq(cfqd, cfqq, "set_slice=%lu", cfqq->slice_end - jiffies);
}
/*
@@ -539,6 +550,7 @@
*/
static void cfq_add_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
+ cfq_log_cfqq(cfqd, cfqq, "add_to_rr");
BUG_ON(cfq_cfqq_on_rr(cfqq));
cfq_mark_cfqq_on_rr(cfqq);
cfqd->busy_queues++;
@@ -552,6 +564,7 @@
*/
static void cfq_del_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
+ cfq_log_cfqq(cfqd, cfqq, "del_from_rr");
BUG_ON(!cfq_cfqq_on_rr(cfqq));
cfq_clear_cfqq_on_rr(cfqq);
@@ -638,6 +651,8 @@
struct cfq_data *cfqd = q->elevator->elevator_data;
cfqd->rq_in_driver++;
+ cfq_log_cfqq(cfqd, RQ_CFQQ(rq), "activate rq, drv=%d",
+ cfqd->rq_in_driver);
/*
* If the depth is larger 1, it really could be queueing. But lets
@@ -657,6 +672,8 @@
WARN_ON(!cfqd->rq_in_driver);
cfqd->rq_in_driver--;
+ cfq_log_cfqq(cfqd, RQ_CFQQ(rq), "deactivate rq, drv=%d",
+ cfqd->rq_in_driver);
}
static void cfq_remove_request(struct request *rq)
@@ -746,6 +763,7 @@
struct cfq_queue *cfqq)
{
if (cfqq) {
+ cfq_log_cfqq(cfqd, cfqq, "set_active");
cfqq->slice_end = 0;
cfq_clear_cfqq_must_alloc_slice(cfqq);
cfq_clear_cfqq_fifo_expire(cfqq);
@@ -763,6 +781,8 @@
__cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
int timed_out)
{
+ cfq_log_cfqq(cfqd, cfqq, "slice expired t=%d", timed_out);
+
if (cfq_cfqq_wait_request(cfqq))
del_timer(&cfqd->idle_slice_timer);
@@ -772,8 +792,10 @@
/*
* store what was left of this slice, if the queue idled/timed out
*/
- if (timed_out && !cfq_cfqq_slice_new(cfqq))
+ if (timed_out && !cfq_cfqq_slice_new(cfqq)) {
cfqq->slice_resid = cfqq->slice_end - jiffies;
+ cfq_log_cfqq(cfqd, cfqq, "resid=%ld", cfqq->slice_resid);
+ }
cfq_resort_rr_list(cfqd, cfqq);
@@ -866,6 +888,12 @@
return;
/*
+ * still requests with the driver, don't idle
+ */
+ if (cfqd->rq_in_driver)
+ return;
+
+ /*
* task has exited, don't wait
*/
cic = cfqd->active_cic;
@@ -892,6 +920,7 @@
sl = min(sl, msecs_to_jiffies(CFQ_MIN_TT));
mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
+ cfq_log(cfqd, "arm_idle: %lu", sl);
}
/*
@@ -902,6 +931,8 @@
struct cfq_data *cfqd = q->elevator->elevator_data;
struct cfq_queue *cfqq = RQ_CFQQ(rq);
+ cfq_log_cfqq(cfqd, cfqq, "dispatch_insert");
+
cfq_remove_request(rq);
cfqq->dispatched++;
elv_dispatch_sort(q, rq);
@@ -931,8 +962,9 @@
rq = rq_entry_fifo(cfqq->fifo.next);
if (time_before(jiffies, rq->start_time + cfqd->cfq_fifo_expire[fifo]))
- return NULL;
+ rq = NULL;
+ cfq_log_cfqq(cfqd, cfqq, "fifo=%p", rq);
return rq;
}
@@ -1072,6 +1104,7 @@
BUG_ON(cfqd->busy_queues);
+ cfq_log(cfqd, "forced_dispatch=%d\n", dispatched);
return dispatched;
}
@@ -1112,6 +1145,7 @@
dispatched += __cfq_dispatch_requests(cfqd, cfqq, max_dispatch);
}
+ cfq_log(cfqd, "dispatched=%d", dispatched);
return dispatched;
}
@@ -1130,6 +1164,7 @@
if (!atomic_dec_and_test(&cfqq->ref))
return;
+ cfq_log_cfqq(cfqd, cfqq, "put_queue");
BUG_ON(rb_first(&cfqq->sort_list));
BUG_ON(cfqq->allocated[READ] + cfqq->allocated[WRITE]);
BUG_ON(cfq_cfqq_on_rr(cfqq));
@@ -1177,8 +1212,19 @@
kmem_cache_free(cfq_ioc_pool, cic);
elv_ioc_count_dec(ioc_count);
- if (ioc_gone && !elv_ioc_count_read(ioc_count))
- complete(ioc_gone);
+ if (ioc_gone) {
+ /*
+ * CFQ scheduler is exiting, grab exit lock and check
+ * the pending io context count. If it hits zero,
+ * complete ioc_gone and set it back to NULL
+ */
+ spin_lock(&ioc_gone_lock);
+ if (ioc_gone && !elv_ioc_count_read(ioc_count)) {
+ complete(ioc_gone);
+ ioc_gone = NULL;
+ }
+ spin_unlock(&ioc_gone_lock);
+ }
}
static void cfq_cic_free(struct cfq_io_context *cic)
@@ -1427,6 +1473,8 @@
cfq_mark_cfqq_idle_window(cfqq);
cfq_mark_cfqq_sync(cfqq);
}
+ cfqq->pid = current->pid;
+ cfq_log_cfqq(cfqd, cfqq, "alloced");
}
if (new_cfqq)
@@ -1675,7 +1723,7 @@
cfq_update_idle_window(struct cfq_data *cfqd, struct cfq_queue *cfqq,
struct cfq_io_context *cic)
{
- int enable_idle;
+ int old_idle, enable_idle;
/*
* Don't idle for async or idle io prio class
@@ -1683,7 +1731,7 @@
if (!cfq_cfqq_sync(cfqq) || cfq_class_idle(cfqq))
return;
- enable_idle = cfq_cfqq_idle_window(cfqq);
+ enable_idle = old_idle = cfq_cfqq_idle_window(cfqq);
if (!atomic_read(&cic->ioc->nr_tasks) || !cfqd->cfq_slice_idle ||
(cfqd->hw_tag && CIC_SEEKY(cic)))
@@ -1695,10 +1743,13 @@
enable_idle = 1;
}
- if (enable_idle)
- cfq_mark_cfqq_idle_window(cfqq);
- else
- cfq_clear_cfqq_idle_window(cfqq);
+ if (old_idle != enable_idle) {
+ cfq_log_cfqq(cfqd, cfqq, "idle=%d", enable_idle);
+ if (enable_idle)
+ cfq_mark_cfqq_idle_window(cfqq);
+ else
+ cfq_clear_cfqq_idle_window(cfqq);
+ }
}
/*
@@ -1757,6 +1808,7 @@
*/
static void cfq_preempt_queue(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
+ cfq_log_cfqq(cfqd, cfqq, "preempt");
cfq_slice_expired(cfqd, 1);
/*
@@ -1818,6 +1870,7 @@
struct cfq_data *cfqd = q->elevator->elevator_data;
struct cfq_queue *cfqq = RQ_CFQQ(rq);
+ cfq_log_cfqq(cfqd, cfqq, "insert_request");
cfq_init_prio_data(cfqq, RQ_CIC(rq)->ioc);
cfq_add_rq_rb(rq);
@@ -1835,6 +1888,7 @@
unsigned long now;
now = jiffies;
+ cfq_log_cfqq(cfqd, cfqq, "complete");
WARN_ON(!cfqd->rq_in_driver);
WARN_ON(!cfqq->dispatched);
@@ -2004,6 +2058,7 @@
cfq_schedule_dispatch(cfqd);
spin_unlock_irqrestore(q->queue_lock, flags);
+ cfq_log(cfqd, "set_request fail");
return 1;
}
@@ -2029,6 +2084,8 @@
unsigned long flags;
int timed_out = 1;
+ cfq_log(cfqd, "idle timer fired");
+
spin_lock_irqsave(cfqd->queue->queue_lock, flags);
cfqq = cfqd->active_queue;
@@ -2317,7 +2374,7 @@
* pending RCU callbacks
*/
if (elv_ioc_count_read(ioc_count))
- wait_for_completion(ioc_gone);
+ wait_for_completion(&all_gone);
cfq_slab_kill();
}
diff --git a/block/cmd-filter.c b/block/cmd-filter.c
new file mode 100644
index 0000000..eec4404
--- /dev/null
+++ b/block/cmd-filter.c
@@ -0,0 +1,334 @@
+/*
+ * Copyright 2004 Peter M. Jones <pjones@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public Licens
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-
+ *
+ */
+
+#include <linux/list.h>
+#include <linux/genhd.h>
+#include <linux/spinlock.h>
+#include <linux/parser.h>
+#include <linux/capability.h>
+#include <linux/bitops.h>
+
+#include <scsi/scsi.h>
+#include <linux/cdrom.h>
+
+int blk_cmd_filter_verify_command(struct blk_scsi_cmd_filter *filter,
+ unsigned char *cmd, mode_t *f_mode)
+{
+ /* root can do any command. */
+ if (capable(CAP_SYS_RAWIO))
+ return 0;
+
+ /* if there's no filter set, assume we're filtering everything out */
+ if (!filter)
+ return -EPERM;
+
+ /* Anybody who can open the device can do a read-safe command */
+ if (test_bit(cmd[0], filter->read_ok))
+ return 0;
+
+ /* Write-safe commands require a writable open */
+ if (test_bit(cmd[0], filter->write_ok) && (*f_mode & FMODE_WRITE))
+ return 0;
+
+ return -EPERM;
+}
+EXPORT_SYMBOL(blk_cmd_filter_verify_command);
+
+int blk_verify_command(struct file *file, unsigned char *cmd)
+{
+ struct gendisk *disk;
+ struct inode *inode;
+
+ if (!file)
+ return -EINVAL;
+
+ inode = file->f_dentry->d_inode;
+ if (!inode)
+ return -EINVAL;
+
+ disk = inode->i_bdev->bd_disk;
+
+ return blk_cmd_filter_verify_command(&disk->cmd_filter,
+ cmd, &file->f_mode);
+}
+EXPORT_SYMBOL(blk_verify_command);
+
+/* and now, the sysfs stuff */
+static ssize_t rcf_cmds_show(struct blk_scsi_cmd_filter *filter, char *page,
+ int rw)
+{
+ char *npage = page;
+ unsigned long *okbits;
+ int i;
+
+ if (rw == READ)
+ okbits = filter->read_ok;
+ else
+ okbits = filter->write_ok;
+
+ for (i = 0; i < BLK_SCSI_MAX_CMDS; i++) {
+ if (test_bit(i, okbits)) {
+ sprintf(npage, "%02x", i);
+ npage += 2;
+ if (i < BLK_SCSI_MAX_CMDS - 1)
+ sprintf(npage++, " ");
+ }
+ }
+
+ if (npage != page)
+ npage += sprintf(npage, "\n");
+
+ return npage - page;
+}
+
+static ssize_t rcf_readcmds_show(struct blk_scsi_cmd_filter *filter, char *page)
+{
+ return rcf_cmds_show(filter, page, READ);
+}
+
+static ssize_t rcf_writecmds_show(struct blk_scsi_cmd_filter *filter,
+ char *page)
+{
+ return rcf_cmds_show(filter, page, WRITE);
+}
+
+static ssize_t rcf_cmds_store(struct blk_scsi_cmd_filter *filter,
+ const char *page, size_t count, int rw)
+{
+ ssize_t ret = 0;
+ unsigned long okbits[BLK_SCSI_CMD_PER_LONG], *target_okbits;
+ int cmd, status, len;
+ substring_t ss;
+
+ memset(&okbits, 0, sizeof(okbits));
+
+ for (len = strlen(page); len > 0; len -= 3) {
+ if (len < 2)
+ break;
+ ss.from = (char *) page + ret;
+ ss.to = (char *) page + ret + 2;
+ ret += 3;
+ status = match_hex(&ss, &cmd);
+ /* either of these cases means invalid input, so do nothing. */
+ if (status || cmd >= BLK_SCSI_MAX_CMDS)
+ return -EINVAL;
+
+ __set_bit(cmd, okbits);
+ }
+
+ if (rw == READ)
+ target_okbits = filter->read_ok;
+ else
+ target_okbits = filter->write_ok;
+
+ memmove(target_okbits, okbits, sizeof(okbits));
+ return count;
+}
+
+static ssize_t rcf_readcmds_store(struct blk_scsi_cmd_filter *filter,
+ const char *page, size_t count)
+{
+ return rcf_cmds_store(filter, page, count, READ);
+}
+
+static ssize_t rcf_writecmds_store(struct blk_scsi_cmd_filter *filter,
+ const char *page, size_t count)
+{
+ return rcf_cmds_store(filter, page, count, WRITE);
+}
+
+struct rcf_sysfs_entry {
+ struct attribute attr;
+ ssize_t (*show)(struct blk_scsi_cmd_filter *, char *);
+ ssize_t (*store)(struct blk_scsi_cmd_filter *, const char *, size_t);
+};
+
+static struct rcf_sysfs_entry rcf_readcmds_entry = {
+ .attr = { .name = "read_table", .mode = S_IRUGO | S_IWUSR },
+ .show = rcf_readcmds_show,
+ .store = rcf_readcmds_store,
+};
+
+static struct rcf_sysfs_entry rcf_writecmds_entry = {
+ .attr = {.name = "write_table", .mode = S_IRUGO | S_IWUSR },
+ .show = rcf_writecmds_show,
+ .store = rcf_writecmds_store,
+};
+
+static struct attribute *default_attrs[] = {
+ &rcf_readcmds_entry.attr,
+ &rcf_writecmds_entry.attr,
+ NULL,
+};
+
+#define to_rcf(atr) container_of((atr), struct rcf_sysfs_entry, attr)
+
+static ssize_t
+rcf_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
+{
+ struct rcf_sysfs_entry *entry = to_rcf(attr);
+ struct blk_scsi_cmd_filter *filter;
+
+ filter = container_of(kobj, struct blk_scsi_cmd_filter, kobj);
+ if (entry->show)
+ return entry->show(filter, page);
+
+ return 0;
+}
+
+static ssize_t
+rcf_attr_store(struct kobject *kobj, struct attribute *attr,
+ const char *page, size_t length)
+{
+ struct rcf_sysfs_entry *entry = to_rcf(attr);
+ struct blk_scsi_cmd_filter *filter;
+
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
+
+ if (!entry->store)
+ return -EINVAL;
+
+ filter = container_of(kobj, struct blk_scsi_cmd_filter, kobj);
+ return entry->store(filter, page, length);
+}
+
+static struct sysfs_ops rcf_sysfs_ops = {
+ .show = rcf_attr_show,
+ .store = rcf_attr_store,
+};
+
+static struct kobj_type rcf_ktype = {
+ .sysfs_ops = &rcf_sysfs_ops,
+ .default_attrs = default_attrs,
+};
+
+#ifndef MAINTENANCE_IN_CMD
+#define MAINTENANCE_IN_CMD 0xa3
+#endif
+
+static void rcf_set_defaults(struct blk_scsi_cmd_filter *filter)
+{
+ /* Basic read-only commands */
+ __set_bit(TEST_UNIT_READY, filter->read_ok);
+ __set_bit(REQUEST_SENSE, filter->read_ok);
+ __set_bit(READ_6, filter->read_ok);
+ __set_bit(READ_10, filter->read_ok);
+ __set_bit(READ_12, filter->read_ok);
+ __set_bit(READ_16, filter->read_ok);
+ __set_bit(READ_BUFFER, filter->read_ok);
+ __set_bit(READ_DEFECT_DATA, filter->read_ok);
+ __set_bit(READ_CAPACITY, filter->read_ok);
+ __set_bit(READ_LONG, filter->read_ok);
+ __set_bit(INQUIRY, filter->read_ok);
+ __set_bit(MODE_SENSE, filter->read_ok);
+ __set_bit(MODE_SENSE_10, filter->read_ok);
+ __set_bit(LOG_SENSE, filter->read_ok);
+ __set_bit(START_STOP, filter->read_ok);
+ __set_bit(GPCMD_VERIFY_10, filter->read_ok);
+ __set_bit(VERIFY_16, filter->read_ok);
+ __set_bit(REPORT_LUNS, filter->read_ok);
+ __set_bit(SERVICE_ACTION_IN, filter->read_ok);
+ __set_bit(RECEIVE_DIAGNOSTIC, filter->read_ok);
+ __set_bit(MAINTENANCE_IN_CMD, filter->read_ok);
+ __set_bit(GPCMD_READ_BUFFER_CAPACITY, filter->read_ok);
+
+ /* Audio CD commands */
+ __set_bit(GPCMD_PLAY_CD, filter->read_ok);
+ __set_bit(GPCMD_PLAY_AUDIO_10, filter->read_ok);
+ __set_bit(GPCMD_PLAY_AUDIO_MSF, filter->read_ok);
+ __set_bit(GPCMD_PLAY_AUDIO_TI, filter->read_ok);
+ __set_bit(GPCMD_PAUSE_RESUME, filter->read_ok);
+
+ /* CD/DVD data reading */
+ __set_bit(GPCMD_READ_CD, filter->read_ok);
+ __set_bit(GPCMD_READ_CD_MSF, filter->read_ok);
+ __set_bit(GPCMD_READ_DISC_INFO, filter->read_ok);
+ __set_bit(GPCMD_READ_CDVD_CAPACITY, filter->read_ok);
+ __set_bit(GPCMD_READ_DVD_STRUCTURE, filter->read_ok);
+ __set_bit(GPCMD_READ_HEADER, filter->read_ok);
+ __set_bit(GPCMD_READ_TRACK_RZONE_INFO, filter->read_ok);
+ __set_bit(GPCMD_READ_SUBCHANNEL, filter->read_ok);
+ __set_bit(GPCMD_READ_TOC_PMA_ATIP, filter->read_ok);
+ __set_bit(GPCMD_REPORT_KEY, filter->read_ok);
+ __set_bit(GPCMD_SCAN, filter->read_ok);
+ __set_bit(GPCMD_GET_CONFIGURATION, filter->read_ok);
+ __set_bit(GPCMD_READ_FORMAT_CAPACITIES, filter->read_ok);
+ __set_bit(GPCMD_GET_EVENT_STATUS_NOTIFICATION, filter->read_ok);
+ __set_bit(GPCMD_GET_PERFORMANCE, filter->read_ok);
+ __set_bit(GPCMD_SEEK, filter->read_ok);
+ __set_bit(GPCMD_STOP_PLAY_SCAN, filter->read_ok);
+
+ /* Basic writing commands */
+ __set_bit(WRITE_6, filter->write_ok);
+ __set_bit(WRITE_10, filter->write_ok);
+ __set_bit(WRITE_VERIFY, filter->write_ok);
+ __set_bit(WRITE_12, filter->write_ok);
+ __set_bit(WRITE_VERIFY_12, filter->write_ok);
+ __set_bit(WRITE_16, filter->write_ok);
+ __set_bit(WRITE_LONG, filter->write_ok);
+ __set_bit(WRITE_LONG_2, filter->write_ok);
+ __set_bit(ERASE, filter->write_ok);
+ __set_bit(GPCMD_MODE_SELECT_10, filter->write_ok);
+ __set_bit(MODE_SELECT, filter->write_ok);
+ __set_bit(LOG_SELECT, filter->write_ok);
+ __set_bit(GPCMD_BLANK, filter->write_ok);
+ __set_bit(GPCMD_CLOSE_TRACK, filter->write_ok);
+ __set_bit(GPCMD_FLUSH_CACHE, filter->write_ok);
+ __set_bit(GPCMD_FORMAT_UNIT, filter->write_ok);
+ __set_bit(GPCMD_REPAIR_RZONE_TRACK, filter->write_ok);
+ __set_bit(GPCMD_RESERVE_RZONE_TRACK, filter->write_ok);
+ __set_bit(GPCMD_SEND_DVD_STRUCTURE, filter->write_ok);
+ __set_bit(GPCMD_SEND_EVENT, filter->write_ok);
+ __set_bit(GPCMD_SEND_KEY, filter->write_ok);
+ __set_bit(GPCMD_SEND_OPC, filter->write_ok);
+ __set_bit(GPCMD_SEND_CUE_SHEET, filter->write_ok);
+ __set_bit(GPCMD_SET_SPEED, filter->write_ok);
+ __set_bit(GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, filter->write_ok);
+ __set_bit(GPCMD_LOAD_UNLOAD, filter->write_ok);
+ __set_bit(GPCMD_SET_STREAMING, filter->write_ok);
+}
+
+int blk_register_filter(struct gendisk *disk)
+{
+ int ret;
+ struct blk_scsi_cmd_filter *filter = &disk->cmd_filter;
+ struct kobject *parent = kobject_get(disk->holder_dir->parent);
+
+ if (!parent)
+ return -ENODEV;
+
+ ret = kobject_init_and_add(&filter->kobj, &rcf_ktype, parent,
+ "%s", "cmd_filter");
+
+ if (ret < 0)
+ return ret;
+
+ rcf_set_defaults(filter);
+ return 0;
+}
+
+void blk_unregister_filter(struct gendisk *disk)
+{
+ struct blk_scsi_cmd_filter *filter = &disk->cmd_filter;
+
+ kobject_put(&filter->kobj);
+ kobject_put(disk->holder_dir->parent);
+}
+
diff --git a/block/elevator.c b/block/elevator.c
index 902dd13..ed6f8f3 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -86,6 +86,12 @@
if (rq->rq_disk != bio->bi_bdev->bd_disk || rq->special)
return 0;
+ /*
+ * only merge integrity protected bio into ditto rq
+ */
+ if (bio_integrity(bio) != blk_integrity_rq(rq))
+ return 0;
+
if (!elv_iosched_allow_merge(rq, bio))
return 0;
@@ -144,7 +150,7 @@
else
sprintf(elv, "%s-iosched", name);
- request_module(elv);
+ request_module("%s", elv);
spin_lock(&elv_list_lock);
e = elevator_find(name);
}
diff --git a/block/genhd.c b/block/genhd.c
index 129ad93..9074f38 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -189,6 +189,7 @@
disk->minors, NULL, exact_match, exact_lock, disk);
register_disk(disk);
blk_register_queue(disk);
+ blk_register_filter(disk);
bdi = &disk->queue->backing_dev_info;
bdi_register_dev(bdi, MKDEV(disk->major, disk->first_minor));
@@ -200,6 +201,7 @@
void unlink_gendisk(struct gendisk *disk)
{
+ blk_unregister_filter(disk);
sysfs_remove_link(&disk->dev.kobj, "bdi");
bdi_unregister(&disk->queue->backing_dev_info);
blk_unregister_queue(disk);
@@ -400,6 +402,14 @@
(disk->flags & GENHD_FL_REMOVABLE ? 1 : 0));
}
+static ssize_t disk_ro_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct gendisk *disk = dev_to_disk(dev);
+
+ return sprintf(buf, "%d\n", disk->policy ? 1 : 0);
+}
+
static ssize_t disk_size_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -472,6 +482,7 @@
static DEVICE_ATTR(range, S_IRUGO, disk_range_show, NULL);
static DEVICE_ATTR(removable, S_IRUGO, disk_removable_show, NULL);
+static DEVICE_ATTR(ro, S_IRUGO, disk_ro_show, NULL);
static DEVICE_ATTR(size, S_IRUGO, disk_size_show, NULL);
static DEVICE_ATTR(capability, S_IRUGO, disk_capability_show, NULL);
static DEVICE_ATTR(stat, S_IRUGO, disk_stat_show, NULL);
@@ -483,6 +494,7 @@
static struct attribute *disk_attrs[] = {
&dev_attr_range.attr,
&dev_attr_removable.attr,
+ &dev_attr_ro.attr,
&dev_attr_size.attr,
&dev_attr_capability.attr,
&dev_attr_stat.attr,
@@ -660,6 +672,8 @@
mutex_lock(&block_class_lock);
list_for_each_entry(dev, &block_class.devices, node) {
+ if (dev->type != &disk_type)
+ continue;
if (strcmp(dev->bus_id, name) == 0) {
struct gendisk *disk = dev_to_disk(dev);
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 78199c0..c5b9bcf 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -105,120 +105,12 @@
return put_user(1, p);
}
-#define CMD_READ_SAFE 0x01
-#define CMD_WRITE_SAFE 0x02
-#define CMD_WARNED 0x04
-#define safe_for_read(cmd) [cmd] = CMD_READ_SAFE
-#define safe_for_write(cmd) [cmd] = CMD_WRITE_SAFE
-
-int blk_verify_command(unsigned char *cmd, int has_write_perm)
-{
- static unsigned char cmd_type[256] = {
-
- /* Basic read-only commands */
- safe_for_read(TEST_UNIT_READY),
- safe_for_read(REQUEST_SENSE),
- safe_for_read(READ_6),
- safe_for_read(READ_10),
- safe_for_read(READ_12),
- safe_for_read(READ_16),
- safe_for_read(READ_BUFFER),
- safe_for_read(READ_DEFECT_DATA),
- safe_for_read(READ_LONG),
- safe_for_read(INQUIRY),
- safe_for_read(MODE_SENSE),
- safe_for_read(MODE_SENSE_10),
- safe_for_read(LOG_SENSE),
- safe_for_read(START_STOP),
- safe_for_read(GPCMD_VERIFY_10),
- safe_for_read(VERIFY_16),
-
- /* Audio CD commands */
- safe_for_read(GPCMD_PLAY_CD),
- safe_for_read(GPCMD_PLAY_AUDIO_10),
- safe_for_read(GPCMD_PLAY_AUDIO_MSF),
- safe_for_read(GPCMD_PLAY_AUDIO_TI),
- safe_for_read(GPCMD_PAUSE_RESUME),
-
- /* CD/DVD data reading */
- safe_for_read(GPCMD_READ_BUFFER_CAPACITY),
- safe_for_read(GPCMD_READ_CD),
- safe_for_read(GPCMD_READ_CD_MSF),
- safe_for_read(GPCMD_READ_DISC_INFO),
- safe_for_read(GPCMD_READ_CDVD_CAPACITY),
- safe_for_read(GPCMD_READ_DVD_STRUCTURE),
- safe_for_read(GPCMD_READ_HEADER),
- safe_for_read(GPCMD_READ_TRACK_RZONE_INFO),
- safe_for_read(GPCMD_READ_SUBCHANNEL),
- safe_for_read(GPCMD_READ_TOC_PMA_ATIP),
- safe_for_read(GPCMD_REPORT_KEY),
- safe_for_read(GPCMD_SCAN),
- safe_for_read(GPCMD_GET_CONFIGURATION),
- safe_for_read(GPCMD_READ_FORMAT_CAPACITIES),
- safe_for_read(GPCMD_GET_EVENT_STATUS_NOTIFICATION),
- safe_for_read(GPCMD_GET_PERFORMANCE),
- safe_for_read(GPCMD_SEEK),
- safe_for_read(GPCMD_STOP_PLAY_SCAN),
-
- /* Basic writing commands */
- safe_for_write(WRITE_6),
- safe_for_write(WRITE_10),
- safe_for_write(WRITE_VERIFY),
- safe_for_write(WRITE_12),
- safe_for_write(WRITE_VERIFY_12),
- safe_for_write(WRITE_16),
- safe_for_write(WRITE_LONG),
- safe_for_write(WRITE_LONG_2),
- safe_for_write(ERASE),
- safe_for_write(GPCMD_MODE_SELECT_10),
- safe_for_write(MODE_SELECT),
- safe_for_write(LOG_SELECT),
- safe_for_write(GPCMD_BLANK),
- safe_for_write(GPCMD_CLOSE_TRACK),
- safe_for_write(GPCMD_FLUSH_CACHE),
- safe_for_write(GPCMD_FORMAT_UNIT),
- safe_for_write(GPCMD_REPAIR_RZONE_TRACK),
- safe_for_write(GPCMD_RESERVE_RZONE_TRACK),
- safe_for_write(GPCMD_SEND_DVD_STRUCTURE),
- safe_for_write(GPCMD_SEND_EVENT),
- safe_for_write(GPCMD_SEND_KEY),
- safe_for_write(GPCMD_SEND_OPC),
- safe_for_write(GPCMD_SEND_CUE_SHEET),
- safe_for_write(GPCMD_SET_SPEED),
- safe_for_write(GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL),
- safe_for_write(GPCMD_LOAD_UNLOAD),
- safe_for_write(GPCMD_SET_STREAMING),
- };
- unsigned char type = cmd_type[cmd[0]];
-
- /* Anybody who can open the device can do a read-safe command */
- if (type & CMD_READ_SAFE)
- return 0;
-
- /* Write-safe commands just require a writable open.. */
- if ((type & CMD_WRITE_SAFE) && has_write_perm)
- return 0;
-
- /* And root can do any command.. */
- if (capable(CAP_SYS_RAWIO))
- return 0;
-
- if (!type) {
- cmd_type[cmd[0]] = CMD_WARNED;
- printk(KERN_WARNING "scsi: unknown opcode 0x%02x\n", cmd[0]);
- }
-
- /* Otherwise fail it with an "Operation not permitted" */
- return -EPERM;
-}
-EXPORT_SYMBOL_GPL(blk_verify_command);
-
static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq,
- struct sg_io_hdr *hdr, int has_write_perm)
+ struct sg_io_hdr *hdr, struct file *file)
{
if (copy_from_user(rq->cmd, hdr->cmdp, hdr->cmd_len))
return -EFAULT;
- if (blk_verify_command(rq->cmd, has_write_perm))
+ if (blk_verify_command(file, rq->cmd))
return -EPERM;
/*
@@ -287,7 +179,7 @@
struct gendisk *bd_disk, struct sg_io_hdr *hdr)
{
unsigned long start_time;
- int writing = 0, ret = 0, has_write_perm = 0;
+ int writing = 0, ret = 0;
struct request *rq;
char sense[SCSI_SENSE_BUFFERSIZE];
struct bio *bio;
@@ -316,10 +208,7 @@
if (!rq)
return -ENOMEM;
- if (file)
- has_write_perm = file->f_mode & FMODE_WRITE;
-
- if (blk_fill_sghdr_rq(q, rq, hdr, has_write_perm)) {
+ if (blk_fill_sghdr_rq(q, rq, hdr, file)) {
blk_put_request(rq);
return -EFAULT;
}
@@ -451,7 +340,7 @@
if (in_len && copy_from_user(buffer, sic->data + cmdlen, in_len))
goto error;
- err = blk_verify_command(rq->cmd, file->f_mode & FMODE_WRITE);
+ err = blk_verify_command(file, rq->cmd);
if (err)
goto error;
diff --git a/crypto/chainiv.c b/crypto/chainiv.c
index 6da3f57..9affade 100644
--- a/crypto/chainiv.c
+++ b/crypto/chainiv.c
@@ -117,6 +117,7 @@
static int async_chainiv_schedule_work(struct async_chainiv_ctx *ctx)
{
int queued;
+ int err = ctx->err;
if (!ctx->queue.qlen) {
smp_mb__before_clear_bit();
@@ -131,7 +132,7 @@
BUG_ON(!queued);
out:
- return ctx->err;
+ return err;
}
static int async_chainiv_postpone_request(struct skcipher_givcrypt_request *req)
@@ -227,6 +228,7 @@
postponed);
struct skcipher_givcrypt_request *req;
struct ablkcipher_request *subreq;
+ int err;
/* Only handle one request at a time to avoid hogging keventd. */
spin_lock_bh(&ctx->lock);
@@ -241,7 +243,11 @@
subreq = skcipher_givcrypt_reqctx(req);
subreq->base.flags |= CRYPTO_TFM_REQ_MAY_SLEEP;
- async_chainiv_givencrypt_tail(req);
+ err = async_chainiv_givencrypt_tail(req);
+
+ local_bh_disable();
+ skcipher_givcrypt_complete(req, err);
+ local_bh_enable();
}
static int async_chainiv_init(struct crypto_tfm *tfm)
diff --git a/crypto/cts.c b/crypto/cts.c
index c4e70bf..ccf9c5d 100644
--- a/crypto/cts.c
+++ b/crypto/cts.c
@@ -89,6 +89,9 @@
if (lastn < 0)
return -EINVAL;
+ sg_init_table(sgsrc, 1);
+ sg_init_table(sgdst, 1);
+
memset(s, 0, sizeof(s));
scatterwalk_map_and_copy(s, src, offset, nbytes, 0);
@@ -172,6 +175,9 @@
if (lastn < 0)
return -EINVAL;
+ sg_init_table(sgsrc, 1);
+ sg_init_table(sgdst, 1);
+
scatterwalk_map_and_copy(s, src, offset, nbytes, 0);
lcldesc.tfm = ctx->child;
diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index 6beabc5..e47f6e0 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -586,12 +586,6 @@
j = 0;
for (i = 0; i < tcount; i++) {
- data = kzalloc(template[i].ilen, GFP_KERNEL);
- if (!data)
- continue;
-
- memcpy(data, template[i].input, template[i].ilen);
-
if (template[i].iv)
memcpy(iv, template[i].iv, MAX_IVLEN);
else
@@ -613,10 +607,8 @@
printk("setkey() failed flags=%x\n",
crypto_ablkcipher_get_flags(tfm));
- if (!template[i].fail) {
- kfree(data);
+ if (!template[i].fail)
goto out;
- }
}
temp = 0;
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index 5b73f6a..831883b 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -233,6 +233,9 @@
device = ac->device;
switch (event) {
+ default:
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Unsupported event [0x%x]\n", event));
case ACPI_AC_NOTIFY_STATUS:
case ACPI_NOTIFY_BUS_CHECK:
case ACPI_NOTIFY_DEVICE_CHECK:
@@ -244,11 +247,6 @@
#ifdef CONFIG_ACPI_SYSFS_POWER
kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
#endif
- break;
- default:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Unsupported event [0x%x]\n", event));
- break;
}
return;
diff --git a/drivers/acpi/bay.c b/drivers/acpi/bay.c
index d2fc941..61b6c5b 100644
--- a/drivers/acpi/bay.c
+++ b/drivers/acpi/bay.c
@@ -301,16 +301,20 @@
*/
pdev->dev.uevent_suppress = 0;
- if (acpi_bay_add_fs(new_bay)) {
- platform_device_unregister(new_bay->pdev);
- goto bay_add_err;
- }
-
/* register for events on this device */
status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
bay_notify, new_bay);
if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Error installing bay notify handler\n");
+ printk(KERN_INFO PREFIX "Error installing bay notify handler\n");
+ platform_device_unregister(new_bay->pdev);
+ goto bay_add_err;
+ }
+
+ if (acpi_bay_add_fs(new_bay)) {
+ acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+ bay_notify);
+ platform_device_unregister(new_bay->pdev);
+ goto bay_add_err;
}
/* if we are on a dock station, we should register for dock
@@ -373,6 +377,9 @@
INIT_LIST_HEAD(&drive_bays);
+ if (acpi_disabled)
+ return -ENODEV;
+
/* look for dockable drive bays */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, find_bay, &bays, NULL);
diff --git a/drivers/acpi/dispatcher/dsfield.c b/drivers/acpi/dispatcher/dsfield.c
index c780783..f988a5e 100644
--- a/drivers/acpi/dispatcher/dsfield.c
+++ b/drivers/acpi/dispatcher/dsfield.c
@@ -450,10 +450,6 @@
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- if (!arg) {
- return_ACPI_STATUS(AE_AML_NO_OPERAND);
- }
-
/* Creating new namespace node(s), should not already exist */
flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE |
@@ -467,6 +463,7 @@
/*
* Walk the list of entries in the field_list
+ * Note: field_list can be of zero length. In this case, Arg will be NULL.
*/
while (arg) {
/*
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index fa44fb9..bb7c51f 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -834,7 +834,7 @@
goto dock_add_err;
}
- printk(KERN_INFO PREFIX "%s \n", ACPI_DOCK_DRIVER_DESCRIPTION);
+ printk(KERN_INFO PREFIX "%s\n", ACPI_DOCK_DRIVER_DESCRIPTION);
return 0;
@@ -917,6 +917,9 @@
dock_station = NULL;
+ if (acpi_disabled)
+ return 0;
+
/* look for a dock station */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, find_dock, &num, NULL);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 0924992..5622aee 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -194,7 +194,7 @@
while (time_before(jiffies, delay)) {
if (acpi_ec_check_status(ec, event))
return 0;
- udelay(ACPI_EC_UDELAY);
+ msleep(1);
}
}
pr_err(PREFIX "acpi_ec_wait timeout, status = 0x%2.2x, event = %s\n",
diff --git a/drivers/acpi/executer/exconfig.c b/drivers/acpi/executer/exconfig.c
index 24da921..39d74219 100644
--- a/drivers/acpi/executer/exconfig.c
+++ b/drivers/acpi/executer/exconfig.c
@@ -375,9 +375,15 @@
goto cleanup;
}
+ /*
+ * Add the table to the namespace.
+ *
+ * Note: We load the table objects relative to the root of the namespace.
+ * This appears to go against the ACPI specification, but we do it for
+ * compatibility with other ACPI implementations.
+ */
status =
- acpi_ex_add_table(table_index, walk_state->scope_info->scope.node,
- &ddb_handle);
+ acpi_ex_add_table(table_index, acpi_gbl_root_node, &ddb_handle);
if (ACPI_FAILURE(status)) {
/* On error, table_ptr was deallocated above */
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 06f8634..9b227d4 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -272,6 +272,12 @@
static inline void rtc_wake_setup(void)
{
acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL);
+ /*
+ * After the RTC handler is installed, the Fixed_RTC event should
+ * be disabled. Only when the RTC alarm is set will it be enabled.
+ */
+ acpi_clear_event(ACPI_EVENT_RTC);
+ acpi_disable_event(ACPI_EVENT_RTC, 0);
}
static void rtc_wake_on(struct device *dev)
@@ -327,6 +333,9 @@
{
struct device *dev = get_rtc_dev();
+ if (acpi_disabled)
+ return 0;
+
if (dev) {
rtc_wake_setup();
rtc_info.wake_on = rtc_wake_on;
diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c
index d9937e0..dba3cfb 100644
--- a/drivers/acpi/hardware/hwsleep.c
+++ b/drivers/acpi/hardware/hwsleep.c
@@ -223,15 +223,17 @@
break;
}
- /* Set the system indicators to show the desired sleep state. */
-
+ /*
+ * Set the system indicators to show the desired sleep state.
+ * _SST is an optional method (return no error if not found)
+ */
status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
ACPI_EXCEPTION((AE_INFO, status,
"While executing method _SST"));
}
- return_ACPI_STATUS(status);
+ return_ACPI_STATUS(AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index 5d59cb3..658e5f3 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -140,19 +140,42 @@
}
}
+/*
+ * A lot of BIOS fill in 10 (= no distance) everywhere. This messes
+ * up the NUMA heuristics which wants the local node to have a smaller
+ * distance than the others.
+ * Do some quick checks here and only use the SLIT if it passes.
+ */
+static __init int slit_valid(struct acpi_table_slit *slit)
+{
+ int i, j;
+ int d = slit->locality_count;
+ for (i = 0; i < d; i++) {
+ for (j = 0; j < d; j++) {
+ u8 val = slit->entry[d*i + j];
+ if (i == j) {
+ if (val != LOCAL_DISTANCE)
+ return 0;
+ } else if (val <= LOCAL_DISTANCE)
+ return 0;
+ }
+ }
+ return 1;
+}
+
static int __init acpi_parse_slit(struct acpi_table_header *table)
{
struct acpi_table_slit *slit;
- u32 localities;
if (!table)
return -EINVAL;
slit = (struct acpi_table_slit *)table;
- /* downcast just for %llu vs %lu for i386/ia64 */
- localities = (u32) slit->locality_count;
-
+ if (!slit_valid(slit)) {
+ printk(KERN_INFO "ACPI: SLIT table looks invalid. Not used.\n");
+ return -EINVAL;
+ }
acpi_numa_slit_init(slit);
return 0;
diff --git a/drivers/acpi/parser/psargs.c b/drivers/acpi/parser/psargs.c
index f1e8bf6..e944637 100644
--- a/drivers/acpi/parser/psargs.c
+++ b/drivers/acpi/parser/psargs.c
@@ -268,7 +268,7 @@
*/
if (ACPI_SUCCESS(status) &&
possible_method_call && (node->type == ACPI_TYPE_METHOD)) {
- if (walk_state->op->common.aml_opcode == AML_UNLOAD_OP) {
+ if (walk_state->opcode == AML_UNLOAD_OP) {
/*
* acpi_ps_get_next_namestring has increased the AML pointer,
* so we need to restore the saved AML pointer for method call.
@@ -691,7 +691,7 @@
/* To support super_name arg of Unload */
- if (walk_state->op->common.aml_opcode == AML_UNLOAD_OP) {
+ if (walk_state->opcode == AML_UNLOAD_OP) {
status =
acpi_ps_get_next_namepath(walk_state,
parser_state, arg,
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 386e5aa..9dd0fa9 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -86,7 +86,6 @@
static void acpi_processor_notify(acpi_handle handle, u32 event, void *data);
static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu);
static int acpi_processor_handle_eject(struct acpi_processor *pr);
-extern int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
static const struct acpi_device_id processor_device_ids[] = {
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 2dd2c1f..556ee15 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1669,6 +1669,7 @@
return -EINVAL;
}
+ dev->cpu = pr->id;
for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
dev->states[i].name[0] = '\0';
dev->states[i].desc[0] = '\0';
@@ -1738,7 +1739,7 @@
int acpi_processor_cst_has_changed(struct acpi_processor *pr)
{
- int ret;
+ int ret = 0;
if (boot_option_idle_override)
return 0;
@@ -1756,8 +1757,10 @@
cpuidle_pause_and_lock();
cpuidle_disable_device(&pr->power.dev);
acpi_processor_get_power_info(pr);
- acpi_processor_setup_cpuidle(pr);
- ret = cpuidle_enable_device(&pr->power.dev);
+ if (pr->flags.power) {
+ acpi_processor_setup_cpuidle(pr);
+ ret = cpuidle_enable_device(&pr->power.dev);
+ }
cpuidle_resume_and_unlock();
return ret;
@@ -1813,7 +1816,6 @@
if (pr->flags.power) {
#ifdef CONFIG_CPU_IDLE
acpi_processor_setup_cpuidle(pr);
- pr->power.dev.cpu = pr->id;
if (cpuidle_register_device(&pr->power.dev))
return -EIO;
#endif
@@ -1850,8 +1852,7 @@
return 0;
#ifdef CONFIG_CPU_IDLE
- if (pr->flags.power)
- cpuidle_unregister_device(&pr->power.dev);
+ cpuidle_unregister_device(&pr->power.dev);
#endif
pr->flags.power_setup_done = 0;
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index c3b0cd8..495c63a 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -36,9 +36,8 @@
if (!acpi_wakeup_address) {
return -EFAULT;
}
- acpi_set_firmware_waking_vector((acpi_physical_address)
- virt_to_phys((void *)
- acpi_wakeup_address));
+ acpi_set_firmware_waking_vector(
+ (acpi_physical_address)acpi_wakeup_address);
}
ACPI_FLUSH_CPU_CACHE();
diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c
index 8a5fe87..4ebbba2 100644
--- a/drivers/acpi/sleep/proc.c
+++ b/drivers/acpi/sleep/proc.c
@@ -315,8 +315,11 @@
cmos_bcd_write(day, acpi_gbl_FADT.day_alarm, rtc_control);
if (acpi_gbl_FADT.month_alarm)
cmos_bcd_write(mo, acpi_gbl_FADT.month_alarm, rtc_control);
- if (acpi_gbl_FADT.century)
+ if (acpi_gbl_FADT.century) {
+ if (adjust)
+ yr += cmos_bcd_read(acpi_gbl_FADT.century, rtc_control) * 100;
cmos_bcd_write(yr / 100, acpi_gbl_FADT.century, rtc_control);
+ }
/* enable the rtc alarm interrupt */
rtc_control |= RTC_AIE;
CMOS_WRITE(rtc_control, RTC_CONTROL);
@@ -495,6 +498,12 @@
acpi_root_dir, &acpi_system_alarm_fops);
acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL);
+ /*
+ * Disable the RTC event after installing RTC handler.
+ * Only when RTC alarm is set will it be enabled.
+ */
+ acpi_clear_event(ACPI_EVENT_RTC);
+ acpi_disable_event(ACPI_EVENT_RTC, 0);
#endif /* HAVE_ACPI_LEGACY_ALARM */
/* 'wakeup device' [R/W] */
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index 769f248..5bd2dec 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -77,7 +77,6 @@
container_of(bin_attr, struct acpi_table_attr, attr);
struct acpi_table_header *table_header = NULL;
acpi_status status;
- ssize_t ret_count = count;
status =
acpi_get_table(table_attr->name, table_attr->instance,
@@ -85,18 +84,8 @@
if (ACPI_FAILURE(status))
return -ENODEV;
- if (offset >= table_header->length) {
- ret_count = 0;
- goto end;
- }
-
- if (offset + ret_count > table_header->length)
- ret_count = table_header->length - offset;
-
- memcpy(buf, ((char *)table_header) + offset, ret_count);
-
- end:
- return ret_count;
+ return memory_read_from_buffer(buf, count, &offset,
+ table_header, table_header->length);
}
static void acpi_table_attr_init(struct acpi_table_attr *table_attr,
diff --git a/drivers/acpi/tables/tbinstal.c b/drivers/acpi/tables/tbinstal.c
index 402f93e..5336ce8 100644
--- a/drivers/acpi/tables/tbinstal.c
+++ b/drivers/acpi/tables/tbinstal.c
@@ -123,24 +123,13 @@
}
}
- /* The table must be either an SSDT or a PSDT or an OEMx */
-
- if (!ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_PSDT)&&
- !ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_SSDT)&&
- strncmp(table_desc->pointer->signature, "OEM", 3)) {
- /* Check for a printable name */
- if (acpi_ut_valid_acpi_name(
- *(u32 *) table_desc->pointer->signature)) {
- ACPI_ERROR((AE_INFO, "Table has invalid signature "
- "[%4.4s], must be SSDT or PSDT",
- table_desc->pointer->signature));
- } else {
- ACPI_ERROR((AE_INFO, "Table has invalid signature "
- "(0x%8.8X), must be SSDT or PSDT",
- *(u32 *) table_desc->pointer->signature));
- }
- return_ACPI_STATUS(AE_BAD_SIGNATURE);
- }
+ /*
+ * Originally, we checked the table signature for "SSDT" or "PSDT" here.
+ * Next, we added support for OEMx tables, signature "OEM".
+ * Valid tables were encountered with a null signature, so we've just
+ * given up on validating the signature, since it seems to be a waste
+ * of code. The original code was removed (05/2008).
+ */
(void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
diff --git a/drivers/acpi/tables/tbxface.c b/drivers/acpi/tables/tbxface.c
index fb57b93..0e31960 100644
--- a/drivers/acpi/tables/tbxface.c
+++ b/drivers/acpi/tables/tbxface.c
@@ -540,7 +540,7 @@
acpi_tb_print_table_header(0, table);
if (no_auto_ssdt == 0) {
- printk(KERN_WARNING "ACPI: DSDT override uses original SSDTs unless \"acpi_no_auto_ssdt\"");
+ printk(KERN_WARNING "ACPI: DSDT override uses original SSDTs unless \"acpi_no_auto_ssdt\"\n");
}
}
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 504385b..84c795f 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -364,10 +364,17 @@
if (flag & ACPI_TRIPS_CRITICAL) {
status = acpi_evaluate_integer(tz->device->handle,
"_CRT", NULL, &tz->trips.critical.temperature);
- if (ACPI_FAILURE(status)) {
+ /*
+ * Treat freezing temperatures as invalid as well; some
+ * BIOSes return really low values and cause reboots at startup.
+ * Below zero (Celcius) values clearly aren't right for sure..
+ * ... so lets discard those as invalid.
+ */
+ if (ACPI_FAILURE(status) ||
+ tz->trips.critical.temperature <= 2732) {
tz->trips.critical.flags.valid = 0;
ACPI_EXCEPTION((AE_INFO, status,
- "No critical threshold"));
+ "No or invalid critical threshold"));
return -ENODEV;
} else {
tz->trips.critical.flags.valid = 1;
diff --git a/drivers/acpi/utilities/utmisc.c b/drivers/acpi/utilities/utmisc.c
index e4ba719..1f057b7 100644
--- a/drivers/acpi/utilities/utmisc.c
+++ b/drivers/acpi/utilities/utmisc.c
@@ -1048,6 +1048,7 @@
va_start(args, format);
acpi_os_vprintf(format, args);
acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
+ va_end(args);
}
EXPORT_SYMBOL(acpi_ut_exception);
@@ -1063,7 +1064,6 @@
acpi_os_vprintf(format, args);
acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
va_end(args);
- va_end(args);
}
void ACPI_INTERNAL_VAR_XFACE
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 5e5dda3a..d089c45 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1713,7 +1713,8 @@
status = acpi_video_bus_get_one_device(dev, video);
if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Cant attach device"));
+ ACPI_DEBUG_PRINT((ACPI_DB_WARN,
+ "Cant attach device"));
continue;
}
}
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 9bf2986..ae84949 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -651,9 +651,17 @@
Support for the Winbond W83759A controller on Vesa Local Bus
systems.
+config HAVE_PATA_PLATFORM
+ bool
+ help
+ This is an internal configuration node for any machine that
+ uses pata-platform driver to enable the relevant driver in the
+ configuration structure without having to submit endless patches
+ to update the PATA_PLATFORM entry.
+
config PATA_PLATFORM
tristate "Generic platform device PATA support"
- depends on EMBEDDED || ARCH_RPC || PPC
+ depends on EMBEDDED || ARCH_RPC || PPC || HAVE_PATA_PLATFORM
help
This option enables support for generic directly connected ATA
devices commonly found on embedded systems.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 97f83fb..5e6468a 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -89,6 +89,8 @@
board_ahci_sb600 = 3,
board_ahci_mv = 4,
board_ahci_sb700 = 5,
+ board_ahci_mcp65 = 6,
+ board_ahci_nopmp = 7,
/* global controller registers */
HOST_CAP = 0x00, /* host capabilities */
@@ -190,6 +192,7 @@
AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
+ AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
/* ap->flags bits */
@@ -253,6 +256,8 @@
static void ahci_pmp_detach(struct ata_port *ap);
static int ahci_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
+static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
@@ -329,6 +334,12 @@
.hardreset = ahci_p5wdh_hardreset,
};
+static struct ata_port_operations ahci_sb600_ops = {
+ .inherits = &ahci_ops,
+ .softreset = ahci_sb600_softreset,
+ .pmp_softreset = ahci_sb600_softreset,
+};
+
#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
static const struct ata_port_info ahci_port_info[] = {
@@ -359,11 +370,11 @@
{
AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
- AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP),
+ AHCI_HFLAG_SECT255),
.flags = AHCI_FLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
+ .port_ops = &ahci_sb600_ops,
},
/* board_ahci_mv */
{
@@ -377,8 +388,23 @@
},
/* board_ahci_sb700 */
{
- AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
- AHCI_HFLAG_NO_PMP),
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_sb600_ops,
+ },
+ /* board_ahci_mcp65 */
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ /* board_ahci_nopmp */
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_PMP),
.flags = AHCI_FLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
@@ -438,14 +464,14 @@
{ PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
/* NVIDIA */
- { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */
@@ -502,15 +528,15 @@
{ PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */
{ PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */
{ PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bd0), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bd1), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bd2), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bd3), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */
/* SiS */
- { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
- { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */
- { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
+ { PCI_VDEVICE(SI, 0x1184), board_ahci_nopmp }, /* SiS 966 */
+ { PCI_VDEVICE(SI, 0x1185), board_ahci_nopmp }, /* SiS 968 */
+ { PCI_VDEVICE(SI, 0x0186), board_ahci_nopmp }, /* SiS 968 */
/* Marvell */
{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
@@ -624,12 +650,26 @@
cap &= ~HOST_CAP_NCQ;
}
+ if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "controller can do NCQ, turning on CAP_NCQ\n");
+ cap |= HOST_CAP_NCQ;
+ }
+
if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
dev_printk(KERN_INFO, &pdev->dev,
"controller can't do PMP, turning off CAP_PMP\n");
cap &= ~HOST_CAP_PMP;
}
+ if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
+ port_map != 1) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "JMB361 has only one port, port_map 0x%x -> 0x%x\n",
+ port_map, 1);
+ port_map = 1;
+ }
+
/*
* Temporary Marvell 6145 hack: PATA port presence
* is asserted through the standard AHCI port
@@ -1262,19 +1302,11 @@
return 0;
}
-static int ahci_check_ready(struct ata_link *link)
-{
- void __iomem *port_mmio = ahci_port_base(link->ap);
- u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
-
- return ata_check_ready(status);
-}
-
-static int ahci_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
+static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
+ int pmp, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link))
{
struct ata_port *ap = link->ap;
- int pmp = sata_srst_pmp(link);
const char *reason = NULL;
unsigned long now, msecs;
struct ata_taskfile tf;
@@ -1312,7 +1344,7 @@
ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
/* wait for link to become ready */
- rc = ata_wait_after_reset(link, deadline, ahci_check_ready);
+ rc = ata_wait_after_reset(link, deadline, check_ready);
/* link occupied, -ENODEV too is an error */
if (rc) {
reason = "device not ready";
@@ -1328,6 +1360,72 @@
return rc;
}
+static int ahci_check_ready(struct ata_link *link)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+
+ return ata_check_ready(status);
+}
+
+static int ahci_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ int pmp = sata_srst_pmp(link);
+
+ DPRINTK("ENTER\n");
+
+ return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
+}
+
+static int ahci_sb600_check_ready(struct ata_link *link)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+ u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
+
+ /*
+ * There is no need to check TFDATA if BAD PMP is found due to HW bug,
+ * which can save timeout delay.
+ */
+ if (irq_status & PORT_IRQ_BAD_PMP)
+ return -EIO;
+
+ return ata_check_ready(status);
+}
+
+static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ int pmp = sata_srst_pmp(link);
+ int rc;
+ u32 irq_sts;
+
+ DPRINTK("ENTER\n");
+
+ rc = ahci_do_softreset(link, class, pmp, deadline,
+ ahci_sb600_check_ready);
+
+ /*
+ * Soft reset fails on some ATI chips with IPMS set when PMP
+ * is enabled but SATA HDD/ODD is connected to SATA port,
+ * do soft reset again to port 0.
+ */
+ if (rc == -EIO) {
+ irq_sts = readl(port_mmio + PORT_IRQ_STAT);
+ if (irq_sts & PORT_IRQ_BAD_PMP) {
+ ata_link_printk(link, KERN_WARNING,
+ "failed due to HW bug, retry pmp=0\n");
+ rc = ahci_do_softreset(link, class, 0, deadline,
+ ahci_check_ready);
+ }
+ }
+
+ return rc;
+}
+
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
@@ -1679,7 +1777,7 @@
struct ahci_host_priv *hpriv;
unsigned int i, handled = 0;
void __iomem *mmio;
- u32 irq_stat, irq_ack = 0;
+ u32 irq_stat, irq_masked;
VPRINTK("ENTER\n");
@@ -1688,16 +1786,17 @@
/* sigh. 0xffffffff is a valid return from h/w */
irq_stat = readl(mmio + HOST_IRQ_STAT);
- irq_stat &= hpriv->port_map;
if (!irq_stat)
return IRQ_NONE;
+ irq_masked = irq_stat & hpriv->port_map;
+
spin_lock(&host->lock);
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap;
- if (!(irq_stat & (1 << i)))
+ if (!(irq_masked & (1 << i)))
continue;
ap = host->ports[i];
@@ -1711,14 +1810,20 @@
"interrupt on disabled port %u\n", i);
}
- irq_ack |= (1 << i);
- }
-
- if (irq_ack) {
- writel(irq_ack, mmio + HOST_IRQ_STAT);
handled = 1;
}
+ /* HOST_IRQ_STAT behaves as level triggered latch meaning that
+ * it should be cleared after all the port events are cleared;
+ * otherwise, it will raise a spurious interrupt after each
+ * valid one. Please read section 10.6.2 of ahci 1.1 for more
+ * information.
+ *
+ * Also, use the unmasked value to clear interrupt as spurious
+ * pending event on a dummy port might cause screaming IRQ.
+ */
+ writel(irq_stat, mmio + HOST_IRQ_STAT);
+
spin_unlock(&host->lock);
VPRINTK("EXIT\n");
@@ -2118,7 +2223,8 @@
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- struct ata_port_info pi = ahci_port_info[ent->driver_data];
+ unsigned int board_id = ent->driver_data;
+ struct ata_port_info pi = ahci_port_info[board_id];
const struct ata_port_info *ppi[] = { &pi, NULL };
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
@@ -2167,6 +2273,11 @@
return -ENOMEM;
hpriv->flags |= (unsigned long)pi.private_data;
+ /* MCP65 revision A1 and A2 can't do MSI */
+ if (board_id == board_ahci_mcp65 &&
+ (pdev->revision == 0xa1 || pdev->revision == 0xa2))
+ hpriv->flags |= AHCI_HFLAG_NO_MSI;
+
if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
pci_intx(pdev, 1);
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index a9027b8..a90ae03 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -247,10 +247,11 @@
{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller 2 IDE (ICH8) */
{ 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
- /* Mobile SATA Controller IDE (ICH8M) */
- { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* Mobile SATA Controller IDE (ICH8M), Apple */
{ 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata },
+ { 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata },
+ /* Mobile SATA Controller IDE (ICH8M) */
+ { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH9) */
{ 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH9) */
@@ -526,7 +527,7 @@
[ich8m_apple_sata] =
{
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
+ .flags = PIIX_SATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
@@ -573,6 +574,8 @@
{ 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
{ 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
{ 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */
+ { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */
+ { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */
{ 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
/* end marker */
{ 0, }
@@ -1040,6 +1043,13 @@
},
},
{
+ .ident = "TECRA M4",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M4"),
+ },
+ },
+ {
.ident = "TECRA M5",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index dbf6ca7..9330b79 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -29,14 +29,16 @@
enum {
ATA_ACPI_FILTER_SETXFER = 1 << 0,
ATA_ACPI_FILTER_LOCK = 1 << 1,
+ ATA_ACPI_FILTER_DIPM = 1 << 2,
ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER |
- ATA_ACPI_FILTER_LOCK,
+ ATA_ACPI_FILTER_LOCK |
+ ATA_ACPI_FILTER_DIPM,
};
static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
-MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock)");
+MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM)");
#define NO_PORT_MULT 0xffff
#define SATA_ADR(root, pmp) (((root) << 16) | (pmp))
@@ -118,12 +120,62 @@
ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
}
-static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device
- *dev, u32 event)
+static void ata_acpi_eject_device(acpi_handle handle)
+{
+ struct acpi_object_list arg_list;
+ union acpi_object arg;
+
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = 1;
+
+ if (ACPI_FAILURE(acpi_evaluate_object(handle, "_EJ0",
+ &arg_list, NULL)))
+ printk(KERN_ERR "Failed to evaluate _EJ0!\n");
+}
+
+/* @ap and @dev are the same as ata_acpi_handle_hotplug() */
+static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev)
+{
+ if (dev)
+ dev->flags |= ATA_DFLAG_DETACH;
+ else {
+ struct ata_link *tlink;
+ struct ata_device *tdev;
+
+ ata_port_for_each_link(tlink, ap)
+ ata_link_for_each_dev(tdev, tlink)
+ tdev->flags |= ATA_DFLAG_DETACH;
+ }
+
+ ata_port_schedule_eh(ap);
+}
+
+/**
+ * ata_acpi_handle_hotplug - ACPI event handler backend
+ * @ap: ATA port ACPI event occurred
+ * @dev: ATA device ACPI event occurred (can be NULL)
+ * @event: ACPI event which occurred
+ * @is_dock_event: boolean indicating whether the event was a dock one
+ *
+ * All ACPI bay / device realted events end up in this function. If
+ * the event is port-wide @dev is NULL. If the event is specific to a
+ * device, @dev points to it.
+ *
+ * Hotplug (as opposed to unplug) notification is always handled as
+ * port-wide while unplug only kills the target device on device-wide
+ * event.
+ *
+ * LOCKING:
+ * ACPI notify handler context. May sleep.
+ */
+static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
+ u32 event, int is_dock_event)
{
char event_string[12];
char *envp[] = { event_string, NULL };
- struct ata_eh_info *ehi;
+ struct ata_eh_info *ehi = &ap->link.eh_info;
struct kobject *kobj = NULL;
int wait = 0;
unsigned long flags;
@@ -131,87 +183,103 @@
unsigned long sta;
acpi_status status;
- if (!ap)
- ap = dev->link->ap;
- ehi = &ap->link.eh_info;
-
- spin_lock_irqsave(ap->lock, flags);
-
- if (dev)
+ if (dev) {
+ if (dev->sdev)
+ kobj = &dev->sdev->sdev_gendev.kobj;
handle = dev->acpi_handle;
- else
+ } else {
+ kobj = &ap->dev->kobj;
handle = ap->acpi_handle;
+ }
status = acpi_get_handle(handle, "_EJ0", &tmphandle);
- if (ACPI_FAILURE(status)) {
- /* This device is not ejectable */
- spin_unlock_irqrestore(ap->lock, flags);
+ if (ACPI_FAILURE(status))
+ /* This device does not support hotplug */
return;
- }
- status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
- if (ACPI_FAILURE(status)) {
- printk ("Unable to determine bay status\n");
- spin_unlock_irqrestore(ap->lock, flags);
- return;
- }
+ if (event == ACPI_NOTIFY_BUS_CHECK ||
+ event == ACPI_NOTIFY_DEVICE_CHECK)
+ status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+
+ spin_lock_irqsave(ap->lock, flags);
switch (event) {
case ACPI_NOTIFY_BUS_CHECK:
case ACPI_NOTIFY_DEVICE_CHECK:
ata_ehi_push_desc(ehi, "ACPI event");
- if (!sta) {
- /* Device has been unplugged */
- if (dev)
- dev->flags |= ATA_DFLAG_DETACH;
- else {
- struct ata_link *tlink;
- struct ata_device *tdev;
- ata_port_for_each_link(tlink, ap) {
- ata_link_for_each_dev(tdev, tlink) {
- tdev->flags |=
- ATA_DFLAG_DETACH;
- }
- }
- }
- ata_port_schedule_eh(ap);
- wait = 1;
- } else {
+ if (ACPI_FAILURE(status)) {
+ ata_port_printk(ap, KERN_ERR,
+ "acpi: failed to determine bay status (0x%x)\n",
+ status);
+ break;
+ }
+
+ if (sta) {
ata_ehi_hotplugged(ehi);
ata_port_freeze(ap);
+ } else {
+ /* The device has gone - unplug it */
+ ata_acpi_detach_device(ap, dev);
+ wait = 1;
}
+ break;
+ case ACPI_NOTIFY_EJECT_REQUEST:
+ ata_ehi_push_desc(ehi, "ACPI event");
+
+ if (!is_dock_event)
+ break;
+
+ /* undock event - immediate unplug */
+ ata_acpi_detach_device(ap, dev);
+ wait = 1;
+ break;
}
+ /* make sure kobj doesn't go away while ap->lock is released */
+ kobject_get(kobj);
+
spin_unlock_irqrestore(ap->lock, flags);
- if (wait)
+ if (wait) {
ata_port_wait_eh(ap);
+ ata_acpi_eject_device(handle);
+ }
- if (dev) {
- if (dev->sdev)
- kobj = &dev->sdev->sdev_gendev.kobj;
- } else
- kobj = &ap->dev->kobj;
-
- if (kobj) {
+ if (kobj && !is_dock_event) {
sprintf(event_string, "BAY_EVENT=%d", event);
kobject_uevent_env(kobj, KOBJ_CHANGE, envp);
}
+
+ kobject_put(kobj);
+}
+
+static void ata_acpi_dev_notify_dock(acpi_handle handle, u32 event, void *data)
+{
+ struct ata_device *dev = data;
+
+ ata_acpi_handle_hotplug(dev->link->ap, dev, event, 1);
+}
+
+static void ata_acpi_ap_notify_dock(acpi_handle handle, u32 event, void *data)
+{
+ struct ata_port *ap = data;
+
+ ata_acpi_handle_hotplug(ap, NULL, event, 1);
}
static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data)
{
struct ata_device *dev = data;
- ata_acpi_handle_hotplug(NULL, dev, event);
+ ata_acpi_handle_hotplug(dev->link->ap, dev, event, 0);
}
static void ata_acpi_ap_notify(acpi_handle handle, u32 event, void *data)
{
struct ata_port *ap = data;
- ata_acpi_handle_hotplug(ap, NULL, event);
+ ata_acpi_handle_hotplug(ap, NULL, event, 0);
}
/**
@@ -252,7 +320,7 @@
ata_acpi_ap_notify, ap);
/* we might be on a docking station */
register_hotplug_dock_device(ap->acpi_handle,
- ata_acpi_ap_notify, ap);
+ ata_acpi_ap_notify_dock, ap);
}
for (j = 0; j < ata_link_max_devices(&ap->link); j++) {
@@ -264,7 +332,7 @@
ata_acpi_dev_notify, dev);
/* we might be on a docking station */
register_hotplug_dock_device(dev->acpi_handle,
- ata_acpi_dev_notify, dev);
+ ata_acpi_dev_notify_dock, dev);
}
}
}
@@ -627,6 +695,14 @@
return 1;
}
+ if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_DIPM) {
+ /* inhibit enabling DIPM */
+ if (tf->command == ATA_CMD_SET_FEATURES &&
+ tf->feature == SETFEATURES_SATA_ENABLE &&
+ tf->nsect == SATA_DIPM)
+ return 1;
+ }
+
return 0;
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3c89f20..303fc0d 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4297,7 +4297,7 @@
}
/**
- * ata_check_atapi_dma - Check whether ATAPI DMA can be supported
+ * atapi_check_dma - Check whether ATAPI DMA can be supported
* @qc: Metadata associated with taskfile to check
*
* Allow low-level driver to filter ATA PACKET commands, returning
@@ -4310,7 +4310,7 @@
* RETURNS: 0 when ATAPI DMA can be used
* nonzero otherwise
*/
-int ata_check_atapi_dma(struct ata_queued_cmd *qc)
+int atapi_check_dma(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
@@ -5403,7 +5403,7 @@
*/
static void ata_finalize_port_ops(struct ata_port_operations *ops)
{
- static spinlock_t lock = SPIN_LOCK_UNLOCKED;
+ static DEFINE_SPINLOCK(lock);
const struct ata_port_operations *cur;
void **begin = (void **)ops;
void **end = (void **)&ops->inherits;
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 0f9386d..7daf4c0 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -322,9 +322,12 @@
if (vendor == 0x1095 && devid == 0x3726) {
/* sil3726 quirks */
ata_port_for_each_link(link, ap) {
- /* class code report is unreliable */
+ /* Class code report is unreliable and SRST
+ * times out under certain configurations.
+ */
if (link->pmp < 5)
- link->flags |= ATA_LFLAG_ASSUME_ATA;
+ link->flags |= ATA_LFLAG_NO_SRST |
+ ATA_LFLAG_ASSUME_ATA;
/* port 5 is for SEMB device and it doesn't like SRST */
if (link->pmp == 5)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index aeb6e01..499ccc6 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -885,7 +885,8 @@
/* set the min alignment and padding */
blk_queue_update_dma_alignment(sdev->request_queue,
ATA_DMA_PAD_SZ - 1);
- blk_queue_dma_pad(sdev->request_queue, ATA_DMA_PAD_SZ - 1);
+ blk_queue_update_dma_pad(sdev->request_queue,
+ ATA_DMA_PAD_SZ - 1);
/* configure draining */
buf = kmalloc(ATAPI_MAX_DRAIN, q->bounce_gfp | GFP_KERNEL);
@@ -1637,6 +1638,7 @@
/**
* ata_scsi_rbuf_get - Map response buffer.
+ * @cmd: SCSI command containing buffer to be mapped.
* @flags: unsigned long variable to store irq enable status
* @copy_in: copy in from user buffer
*
@@ -1954,7 +1956,7 @@
/**
* ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page
- * @bufp: output buffer
+ * @buf: output buffer
*
* Generate a generic MODE SENSE r/w error recovery page.
*
@@ -2342,8 +2344,8 @@
{
struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_device *dev = qc->dev;
- int using_pio = (dev->flags & ATA_DFLAG_PIO);
int nodata = (scmd->sc_data_direction == DMA_NONE);
+ int using_pio = !nodata && (dev->flags & ATA_DFLAG_PIO);
unsigned int nbytes;
memset(qc->cdb, 0, dev->cdb_len);
@@ -2361,7 +2363,7 @@
ata_qc_set_pc_nbytes(qc);
/* check whether ATAPI DMA is safe */
- if (!using_pio && ata_check_atapi_dma(qc))
+ if (!nodata && !using_pio && atapi_check_dma(qc))
using_pio = 1;
/* Some controller variants snoop this value for Packet
@@ -2401,13 +2403,11 @@
qc->tf.lbam = (nbytes & 0xFF);
qc->tf.lbah = (nbytes >> 8);
- if (using_pio || nodata) {
- /* no data, or PIO data xfer */
- if (nodata)
- qc->tf.protocol = ATAPI_PROT_NODATA;
- else
- qc->tf.protocol = ATAPI_PROT_PIO;
- } else {
+ if (nodata)
+ qc->tf.protocol = ATAPI_PROT_NODATA;
+ else if (using_pio)
+ qc->tf.protocol = ATAPI_PROT_PIO;
+ else {
/* DMA data xfer */
qc->tf.protocol = ATAPI_PROT_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 3c2d228..c0908c2 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -247,7 +247,7 @@
* LOCKING:
* Inherited from caller.
*/
-u8 ata_sff_altstatus(struct ata_port *ap)
+static u8 ata_sff_altstatus(struct ata_port *ap)
{
if (ap->ops->sff_check_altstatus)
return ap->ops->sff_check_altstatus(ap);
@@ -256,6 +256,93 @@
}
/**
+ * ata_sff_irq_status - Check if the device is busy
+ * @ap: port where the device is
+ *
+ * Determine if the port is currently busy. Uses altstatus
+ * if available in order to avoid clearing shared IRQ status
+ * when finding an IRQ source. Non ctl capable devices don't
+ * share interrupt lines fortunately for us.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static u8 ata_sff_irq_status(struct ata_port *ap)
+{
+ u8 status;
+
+ if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) {
+ status = ata_sff_altstatus(ap);
+ /* Not us: We are busy */
+ if (status & ATA_BUSY)
+ return status;
+ }
+ /* Clear INTRQ latch */
+ status = ap->ops->sff_check_status(ap);
+ return status;
+}
+
+/**
+ * ata_sff_sync - Flush writes
+ * @ap: Port to wait for.
+ *
+ * CAUTION:
+ * If we have an mmio device with no ctl and no altstatus
+ * method this will fail. No such devices are known to exist.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+static void ata_sff_sync(struct ata_port *ap)
+{
+ if (ap->ops->sff_check_altstatus)
+ ap->ops->sff_check_altstatus(ap);
+ else if (ap->ioaddr.altstatus_addr)
+ ioread8(ap->ioaddr.altstatus_addr);
+}
+
+/**
+ * ata_sff_pause - Flush writes and wait 400nS
+ * @ap: Port to pause for.
+ *
+ * CAUTION:
+ * If we have an mmio device with no ctl and no altstatus
+ * method this will fail. No such devices are known to exist.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+void ata_sff_pause(struct ata_port *ap)
+{
+ ata_sff_sync(ap);
+ ndelay(400);
+}
+
+/**
+ * ata_sff_dma_pause - Pause before commencing DMA
+ * @ap: Port to pause for.
+ *
+ * Perform I/O fencing and ensure sufficient cycle delays occur
+ * for the HDMA1:0 transition
+ */
+
+void ata_sff_dma_pause(struct ata_port *ap)
+{
+ if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) {
+ /* An altstatus read will cause the needed delay without
+ messing up the IRQ status */
+ ata_sff_altstatus(ap);
+ return;
+ }
+ /* There are no DMA controllers without ctl. BUG here to ensure
+ we never violate the HDMA1:0 transition timing and risk
+ corruption. */
+ BUG();
+}
+
+/**
* ata_sff_busy_sleep - sleep until BSY clears, or timeout
* @ap: port containing status register to be polled
* @tmout_pat: impatience timeout
@@ -742,7 +829,7 @@
} else
ata_pio_sector(qc);
- ata_sff_altstatus(qc->ap); /* flush */
+ ata_sff_sync(qc->ap); /* flush */
}
/**
@@ -763,8 +850,9 @@
WARN_ON(qc->dev->cdb_len < 12);
ap->ops->sff_data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
- ata_sff_altstatus(ap); /* flush */
-
+ ata_sff_sync(ap);
+ /* FIXME: If the CDB is for DMA do we need to do the transition delay
+ or is bmdma_start guaranteed to do it ? */
switch (qc->tf.protocol) {
case ATAPI_PROT_PIO:
ap->hsm_task_state = HSM_ST;
@@ -905,7 +993,7 @@
if (unlikely(__atapi_pio_bytes(qc, bytes)))
goto err_out;
- ata_sff_altstatus(ap); /* flush */
+ ata_sff_sync(ap); /* flush */
return;
@@ -1006,6 +1094,7 @@
int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
u8 status, int in_wq)
{
+ struct ata_eh_info *ehi = &ap->link.eh_info;
unsigned long flags = 0;
int poll_next;
@@ -1037,9 +1126,12 @@
if (likely(status & (ATA_ERR | ATA_DF)))
/* device stops HSM for abort/error */
qc->err_mask |= AC_ERR_DEV;
- else
+ else {
/* HSM violation. Let EH handle this */
+ ata_ehi_push_desc(ehi,
+ "ST_FIRST: !(DRQ|ERR|DF)");
qc->err_mask |= AC_ERR_HSM;
+ }
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -1058,9 +1150,9 @@
* the CDB.
*/
if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) {
- ata_port_printk(ap, KERN_WARNING,
- "DRQ=1 with device error, "
- "dev_stat 0x%X\n", status);
+ ata_ehi_push_desc(ehi, "ST_FIRST: "
+ "DRQ=1 with device error, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -1117,9 +1209,9 @@
* let the EH abort the command or reset the device.
*/
if (unlikely(status & (ATA_ERR | ATA_DF))) {
- ata_port_printk(ap, KERN_WARNING, "DRQ=1 with "
- "device error, dev_stat 0x%X\n",
- status);
+ ata_ehi_push_desc(ehi, "ST-ATAPI: "
+ "DRQ=1 with device error, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -1138,13 +1230,17 @@
if (likely(status & (ATA_ERR | ATA_DF)))
/* device stops HSM for abort/error */
qc->err_mask |= AC_ERR_DEV;
- else
+ else {
/* HSM violation. Let EH handle this.
* Phantom devices also trigger this
* condition. Mark hint.
*/
+ ata_ehi_push_desc(ehi, "ST-ATA: "
+ "DRQ=1 with device error, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM |
AC_ERR_NODEV_HINT;
+ }
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -1169,8 +1265,12 @@
status = ata_wait_idle(ap);
}
- if (status & (ATA_BUSY | ATA_DRQ))
+ if (status & (ATA_BUSY | ATA_DRQ)) {
+ ata_ehi_push_desc(ehi, "ST-ATA: "
+ "BUSY|DRQ persists on ERR|DF, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM;
+ }
/* ata_pio_sectors() might change the
* state to HSM_ST_LAST. so, the state
@@ -1489,14 +1589,10 @@
goto idle_irq;
}
- /* check altstatus */
- status = ata_sff_altstatus(ap);
- if (status & ATA_BUSY)
- goto idle_irq;
- /* check main status, clearing INTRQ */
- status = ap->ops->sff_check_status(ap);
- if (unlikely(status & ATA_BUSY))
+ /* check main status, clearing INTRQ if needed */
+ status = ata_sff_irq_status(ap);
+ if (status & ATA_BUSY)
goto idle_irq;
/* ack bmdma irq events */
@@ -2030,7 +2126,7 @@
ap->ops->bmdma_stop(qc);
}
- ata_sff_altstatus(ap);
+ ata_sff_sync(ap); /* FIXME: We don't need this */
ap->ops->sff_check_status(ap);
ap->ops->sff_irq_clear(ap);
@@ -2203,7 +2299,7 @@
mmio + ATA_DMA_CMD);
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_sff_altstatus(ap); /* dummy read */
+ ata_sff_dma_pause(ap);
}
/**
@@ -2722,7 +2818,8 @@
EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep);
EXPORT_SYMBOL_GPL(ata_sff_dev_select);
EXPORT_SYMBOL_GPL(ata_sff_check_status);
-EXPORT_SYMBOL_GPL(ata_sff_altstatus);
+EXPORT_SYMBOL_GPL(ata_sff_dma_pause);
+EXPORT_SYMBOL_GPL(ata_sff_pause);
EXPORT_SYMBOL_GPL(ata_sff_busy_sleep);
EXPORT_SYMBOL_GPL(ata_sff_wait_ready);
EXPORT_SYMBOL_GPL(ata_sff_tf_load);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 4514283..1cf803a 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -106,7 +106,7 @@
extern void ata_qc_free(struct ata_queued_cmd *qc);
extern void ata_qc_issue(struct ata_queued_cmd *qc);
extern void __ata_qc_complete(struct ata_queued_cmd *qc);
-extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
+extern int atapi_check_dma(struct ata_queued_cmd *qc);
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
extern void ata_dev_init(struct ata_device *dev);
extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp);
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index 1713843..cf9e984 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -270,7 +270,7 @@
disable_dma(state->dma);
/* see ata_bmdma_stop */
- ata_sff_altstatus(ap);
+ ata_sff_dma_pause(ap);
}
static u8 pata_icside_bmdma_status(struct ata_port *ap)
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 3d39f9d..41b4361 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -414,6 +414,7 @@
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
+ PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
@@ -424,6 +425,7 @@
PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index a108d25..f8b3ffc 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -57,7 +57,9 @@
struct ata_host *ah = ap->host;
struct rb532_cf_info *info = ah->private_data;
- ata_sff_altstatus(ap);
+ /* FIXME: Keep previous delay. If this is merely a fence then
+ ata_sff_sync might be sufficient. */
+ ata_sff_dma_pause(ap);
ndelay(RB500_CF_IO_DELAY);
set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index e965b25..bbf5aa3 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -726,7 +726,7 @@
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_sff_altstatus(ap); /* dummy read */
+ ata_sff_dma_pause(ap); /* dummy read */
}
/**
@@ -747,7 +747,8 @@
return host_stat;
/* errata A252,A308 workaround: Step4 */
- if ((ata_sff_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ))
+ if ((scc_check_altstatus(ap) & ATA_ERR)
+ && (int_status & INTSTS_INTRQ))
return (host_stat | ATA_DMA_INTR);
/* errata A308 workaround Step5 */
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index e82c66e..26345d7 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -56,6 +56,7 @@
{ 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */
{ 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */
{ 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */
+ { 0x5513, 0x1039, 0x5513 }, /* Targa Visionary 1000 */
/* end marker */
{ 0, }
};
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 853559e..3924e72 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -34,7 +34,7 @@
SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_NCQ),
+ ATA_FLAG_PMP | ATA_FLAG_NCQ),
SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH,
SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */
@@ -395,7 +395,7 @@
cd = (struct command_desc *)pp->cmdentry + tag;
cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE;
- ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) &cd->cfis);
+ ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *) &cd->cfis);
VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n",
cd->cfis[0], cd->cfis[1], cd->cfis[2]);
@@ -438,6 +438,8 @@
ioread32(CA + hcr_base),
ioread32(CE + hcr_base), ioread32(CC + hcr_base));
+ iowrite32(qc->dev->link->pmp, CQPMP + hcr_base);
+
/* Simply queue command to the controller/device */
iowrite32(1 << tag, CQ + hcr_base);
@@ -558,11 +560,36 @@
ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
}
+static void sata_fsl_pmp_attach(struct ata_port *ap)
+{
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ u32 temp;
+
+ temp = ioread32(hcr_base + HCONTROL);
+ iowrite32((temp | HCONTROL_PMP_ATTACHED), hcr_base + HCONTROL);
+}
+
+static void sata_fsl_pmp_detach(struct ata_port *ap)
+{
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ u32 temp;
+
+ temp = ioread32(hcr_base + HCONTROL);
+ temp &= ~HCONTROL_PMP_ATTACHED;
+ iowrite32(temp, hcr_base + HCONTROL);
+
+ /* enable interrupts on the controller/port */
+ temp = ioread32(hcr_base + HCONTROL);
+ iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL);
+
+}
+
static int sata_fsl_port_start(struct ata_port *ap)
{
struct device *dev = ap->host->dev;
struct sata_fsl_port_priv *pp;
- int retval;
void *mem;
dma_addr_t mem_dma;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
@@ -688,12 +715,13 @@
}
static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
+ unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct sata_fsl_port_priv *pp = ap->private_data;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
+ int pmp = sata_srst_pmp(link);
u32 temp;
struct ata_taskfile tf;
u8 *cfis;
@@ -703,6 +731,9 @@
DPRINTK("in xx_softreset\n");
+ if (pmp != SATA_PMP_CTRL_PORT)
+ goto issue_srst;
+
try_offline_again:
/*
* Force host controller to go off-line, aborting current operations
@@ -746,6 +777,7 @@
temp = ioread32(hcr_base + HCONTROL);
temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE);
+ temp |= HCONTROL_PMP_ATTACHED;
iowrite32(temp, hcr_base + HCONTROL);
temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, 0, 1, 500);
@@ -771,7 +803,8 @@
ata_port_printk(ap, KERN_WARNING,
"No Device OR PHYRDY change,Hstatus = 0x%x\n",
ioread32(hcr_base + HSTATUS));
- goto err;
+ *class = ATA_DEV_NONE;
+ goto out;
}
/*
@@ -783,7 +816,8 @@
if ((temp & 0xFF) != 0x18) {
ata_port_printk(ap, KERN_WARNING, "No Signature Update\n");
- goto err;
+ *class = ATA_DEV_NONE;
+ goto out;
} else {
ata_port_printk(ap, KERN_INFO,
"Signature Update detected @ %d msecs\n",
@@ -798,6 +832,7 @@
* reached here, we can send a command to the target device
*/
+issue_srst:
DPRINTK("Sending SRST/device reset\n");
ata_tf_init(link->device, &tf);
@@ -808,7 +843,7 @@
SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */
- ata_tf_to_fis(&tf, 0, 0, cfis);
+ ata_tf_to_fis(&tf, pmp, 0, cfis);
DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n",
cfis[0], cfis[1], cfis[2], cfis[3]);
@@ -854,8 +889,10 @@
sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */
- ata_tf_to_fis(&tf, 0, 0, cfis);
+ ata_tf_to_fis(&tf, pmp, 0, cfis);
+ if (pmp != SATA_PMP_CTRL_PORT)
+ iowrite32(pmp, CQPMP + hcr_base);
iowrite32(1, CQ + hcr_base);
msleep(150); /* ?? */
@@ -886,12 +923,21 @@
VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE));
}
+out:
return 0;
err:
return -EIO;
}
+static void sata_fsl_error_handler(struct ata_port *ap)
+{
+
+ DPRINTK("in xx_error_handler\n");
+ sata_pmp_error_handler(ap);
+
+}
+
static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc)
{
if (qc->flags & ATA_QCFLAG_FAILED)
@@ -905,18 +951,21 @@
static void sata_fsl_error_intr(struct ata_port *ap)
{
- struct ata_link *link = &ap->link;
- struct ata_eh_info *ehi = &link->eh_info;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
- u32 hstatus, dereg, cereg = 0, SError = 0;
+ u32 hstatus, dereg=0, cereg = 0, SError = 0;
unsigned int err_mask = 0, action = 0;
- struct ata_queued_cmd *qc;
- int freeze = 0;
+ int freeze = 0, abort=0;
+ struct ata_link *link = NULL;
+ struct ata_queued_cmd *qc = NULL;
+ struct ata_eh_info *ehi;
hstatus = ioread32(hcr_base + HSTATUS);
cereg = ioread32(hcr_base + CE);
+ /* first, analyze and record host port events */
+ link = &ap->link;
+ ehi = &link->eh_info;
ata_ehi_clear_desc(ehi);
/*
@@ -926,12 +975,41 @@
sata_fsl_scr_read(ap, SCR_ERROR, &SError);
if (unlikely(SError & 0xFFFF0000)) {
sata_fsl_scr_write(ap, SCR_ERROR, SError);
- err_mask |= AC_ERR_ATA_BUS;
}
DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n",
hstatus, cereg, ioread32(hcr_base + DE), SError);
+ /* handle fatal errors */
+ if (hstatus & FATAL_ERROR_DECODE) {
+ ehi->err_mask |= AC_ERR_ATA_BUS;
+ ehi->action |= ATA_EH_SOFTRESET;
+
+ /*
+ * Ignore serror in case of fatal errors as we always want
+ * to do a soft-reset of the FSL SATA controller. Analyzing
+ * serror may cause libata to schedule a hard-reset action,
+ * and hard-reset currently does not do controller
+ * offline/online, causing command timeouts and leads to an
+ * un-recoverable state, hence make libATA ignore
+ * autopsy in case of fatal errors.
+ */
+
+ ehi->flags |= ATA_EHI_NO_AUTOPSY;
+
+ freeze = 1;
+ }
+
+ /* Handle PHYRDY change notification */
+ if (hstatus & INT_ON_PHYRDY_CHG) {
+ DPRINTK("SATA FSL: PHYRDY change indication\n");
+
+ /* Setup a soft-reset EH action */
+ ata_ehi_hotplugged(ehi);
+ ata_ehi_push_desc(ehi, "%s", "PHY RDY changed");
+ freeze = 1;
+ }
+
/* handle single device errors */
if (cereg) {
/*
@@ -943,58 +1021,68 @@
* clearing the device error, we can issue commands to the
* device to interrogate it to find the source of the error.
*/
- dereg = ioread32(hcr_base + DE);
- iowrite32(dereg, hcr_base + DE);
- iowrite32(cereg, hcr_base + CE);
+ abort = 1;
DPRINTK("single device error, CE=0x%x, DE=0x%x\n",
ioread32(hcr_base + CE), ioread32(hcr_base + DE));
- /*
- * We should consider this as non fatal error, and TF must
- * be updated as done below.
- */
- err_mask |= AC_ERR_DEV;
- }
+ /* find out the offending link and qc */
+ if (ap->nr_pmp_links) {
+ dereg = ioread32(hcr_base + DE);
+ iowrite32(dereg, hcr_base + DE);
+ iowrite32(cereg, hcr_base + CE);
- /* handle fatal errors */
- if (hstatus & FATAL_ERROR_DECODE) {
- err_mask |= AC_ERR_ATA_BUS;
- action |= ATA_EH_RESET;
- /* how will fatal error interrupts be completed ?? */
- freeze = 1;
- }
+ if (dereg < ap->nr_pmp_links) {
+ link = &ap->pmp_link[dereg];
+ ehi = &link->eh_info;
+ qc = ata_qc_from_tag(ap, link->active_tag);
+ /*
+ * We should consider this as non fatal error,
+ * and TF must be updated as done below.
+ */
- /* Handle PHYRDY change notification */
- if (hstatus & INT_ON_PHYRDY_CHG) {
- DPRINTK("SATA FSL: PHYRDY change indication\n");
+ err_mask |= AC_ERR_DEV;
- /* Setup a soft-reset EH action */
- ata_ehi_hotplugged(ehi);
- freeze = 1;
+ } else {
+ err_mask |= AC_ERR_HSM;
+ action |= ATA_EH_HARDRESET;
+ freeze = 1;
+ }
+ } else {
+ dereg = ioread32(hcr_base + DE);
+ iowrite32(dereg, hcr_base + DE);
+ iowrite32(cereg, hcr_base + CE);
+
+ qc = ata_qc_from_tag(ap, link->active_tag);
+ /*
+ * We should consider this as non fatal error,
+ * and TF must be updated as done below.
+ */
+ err_mask |= AC_ERR_DEV;
+ }
}
/* record error info */
- qc = ata_qc_from_tag(ap, link->active_tag);
-
- if (qc)
+ if (qc) {
qc->err_mask |= err_mask;
- else
+ } else
ehi->err_mask |= err_mask;
ehi->action |= action;
- ehi->serror |= SError;
/* freeze or abort */
if (freeze)
ata_port_freeze(ap);
- else
- ata_port_abort(ap);
+ else if (abort) {
+ if (qc)
+ ata_link_abort(qc->dev->link);
+ else
+ ata_port_abort(ap);
+ }
}
static void sata_fsl_host_intr(struct ata_port *ap)
{
- struct ata_link *link = &ap->link;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
u32 hstatus, qc_active = 0;
@@ -1017,10 +1105,19 @@
return;
}
- if (link->sactive) { /* only true for NCQ commands */
+ /* Read command completed register */
+ qc_active = ioread32(hcr_base + CC);
+
+ VPRINTK("Status of all queues :\n");
+ VPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n",
+ qc_active,
+ ioread32(hcr_base + CA),
+ ioread32(hcr_base + CE),
+ ioread32(hcr_base + CQ),
+ ap->qc_active);
+
+ if (qc_active & ap->qc_active) {
int i;
- /* Read command completed register */
- qc_active = ioread32(hcr_base + CC);
/* clear CC bit, this will also complete the interrupt */
iowrite32(qc_active, hcr_base + CC);
@@ -1032,8 +1129,9 @@
for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) {
if (qc_active & (1 << i)) {
qc = ata_qc_from_tag(ap, i);
- if (qc)
+ if (qc) {
ata_qc_complete(qc);
+ }
DPRINTK
("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n",
i, ioread32(hcr_base + CC),
@@ -1042,19 +1140,21 @@
}
return;
- } else if (ap->qc_active) {
+ } else if ((ap->qc_active & (1 << ATA_TAG_INTERNAL))) {
iowrite32(1, hcr_base + CC);
- qc = ata_qc_from_tag(ap, link->active_tag);
+ qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL);
- DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n",
- link->active_tag, ioread32(hcr_base + CC));
+ DPRINTK("completing non-ncq cmd, CC=0x%x\n",
+ ioread32(hcr_base + CC));
- if (qc)
+ if (qc) {
ata_qc_complete(qc);
+ }
} else {
/* Spurious Interrupt!! */
DPRINTK("spurious interrupt!!, CC = 0x%x\n",
ioread32(hcr_base + CC));
+ iowrite32(qc_active, hcr_base + CC);
return;
}
}
@@ -1130,9 +1230,6 @@
iowrite32(0x00000FFFF, hcr_base + CE);
iowrite32(0x00000FFFF, hcr_base + DE);
- /* initially assuming no Port multiplier, set CQPMP to 0 */
- iowrite32(0x0, hcr_base + CQPMP);
-
/*
* host controller will be brought on-line, during xx_port_start()
* callback, that should also initiate the OOB, COMINIT sequence
@@ -1154,8 +1251,8 @@
.dma_boundary = ATA_DMA_BOUNDARY,
};
-static const struct ata_port_operations sata_fsl_ops = {
- .inherits = &sata_port_ops,
+static struct ata_port_operations sata_fsl_ops = {
+ .inherits = &sata_pmp_port_ops,
.qc_prep = sata_fsl_qc_prep,
.qc_issue = sata_fsl_qc_issue,
@@ -1168,10 +1265,15 @@
.thaw = sata_fsl_thaw,
.prereset = sata_fsl_prereset,
.softreset = sata_fsl_softreset,
+ .pmp_softreset = sata_fsl_softreset,
+ .error_handler = sata_fsl_error_handler,
.post_internal_cmd = sata_fsl_post_internal_cmd,
.port_start = sata_fsl_port_start,
.port_stop = sata_fsl_port_stop,
+
+ .pmp_attach = sata_fsl_pmp_attach,
+ .pmp_detach = sata_fsl_pmp_detach,
};
static const struct ata_port_info sata_fsl_port_info[] = {
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index fb81f0c..ad169ff 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -72,7 +72,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "1.21"
+#define DRV_VERSION "1.24"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -122,8 +122,6 @@
/* Host Flags */
MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
- /* SoC integrated controllers, no PCI interface */
- MV_FLAG_SOC = (1 << 28),
MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
@@ -226,6 +224,11 @@
PHY_MODE3 = 0x310,
PHY_MODE4 = 0x314,
+ PHY_MODE4_CFG_MASK = 0x00000003, /* phy internal config field */
+ PHY_MODE4_CFG_VALUE = 0x00000001, /* phy internal config field */
+ PHY_MODE4_RSVD_ZEROS = 0x5de3fffa, /* Gen2e always write zeros */
+ PHY_MODE4_RSVD_ONES = 0x00000005, /* Gen2e always write ones */
+
PHY_MODE2 = 0x330,
SATA_IFCTL_OFS = 0x344,
SATA_TESTCTL_OFS = 0x348,
@@ -356,12 +359,12 @@
MV_HP_ERRATA_50XXB2 = (1 << 2),
MV_HP_ERRATA_60X1B2 = (1 << 3),
MV_HP_ERRATA_60X1C0 = (1 << 4),
- MV_HP_ERRATA_XX42A0 = (1 << 5),
MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */
MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */
MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */
MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */
MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */
+ MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */
/* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
@@ -374,7 +377,7 @@
#define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II)
#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
#define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE)
-#define HAS_PCI(host) (!((host)->ports[0]->flags & MV_FLAG_SOC))
+#define IS_SOC(hpriv) ((hpriv)->hp_flags & MV_HP_FLAG_SOC)
#define WINDOW_CTRL(i) (0x20030 + ((i) << 4))
#define WINDOW_BASE(i) (0x20034 + ((i) << 4))
@@ -652,7 +655,7 @@
.port_ops = &mv_iie_ops,
},
{ /* chip_soc */
- .flags = MV_GENIIE_FLAGS | MV_FLAG_SOC,
+ .flags = MV_GENIIE_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv_iie_ops,
@@ -812,12 +815,7 @@
writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index,
port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
-
- if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
- writelfl((pp->crqb_dma & 0xffffffff) | index,
- port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
- else
- writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+ writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
/*
* initialize response queue
@@ -827,13 +825,7 @@
WARN_ON(pp->crpb_dma & 0xff);
writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
-
- if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
- writelfl((pp->crpb_dma & 0xffffffff) | index,
- port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
- else
- writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
-
+ writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index,
port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
}
@@ -1254,7 +1246,7 @@
cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */
cfg |= (1 << 22); /* enab 4-entry host queue cache */
- if (HAS_PCI(ap->host))
+ if (!IS_SOC(hpriv))
cfg |= (1 << 18); /* enab early completion */
if (hpriv->hp_flags & MV_HP_CUT_THROUGH)
cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */
@@ -1330,6 +1322,9 @@
goto out_port_free_dma_mem;
memset(pp->crpb, 0, MV_CRPB_Q_SZ);
+ /* 6041/6081 Rev. "C0" (and newer) are okay with async notify */
+ if (hpriv->hp_flags & MV_HP_ERRATA_60X1C0)
+ ap->flags |= ATA_FLAG_AN;
/*
* For GEN_I, there's no NCQ, so we only allocate a single sg_tbl.
* For later hardware, we need one unique sg_tbl per NCQ tag.
@@ -1600,6 +1595,24 @@
if ((qc->tf.protocol != ATA_PROT_DMA) &&
(qc->tf.protocol != ATA_PROT_NCQ)) {
+ static int limit_warnings = 10;
+ /*
+ * Errata SATA#16, SATA#24: warn if multiple DRQs expected.
+ *
+ * Someday, we might implement special polling workarounds
+ * for these, but it all seems rather unnecessary since we
+ * normally use only DMA for commands which transfer more
+ * than a single block of data.
+ *
+ * Much of the time, this could just work regardless.
+ * So for now, just log the incident, and allow the attempt.
+ */
+ if (limit_warnings > 0 && (qc->nbytes / qc->sect_size) > 1) {
+ --limit_warnings;
+ ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME
+ ": attempting PIO w/multiple DRQ: "
+ "this may fail due to h/w errata\n");
+ }
/*
* We're about to send a non-EDMA capable command to the
* port. Turn off EDMA so there won't be problems accessing
@@ -2225,7 +2238,7 @@
* a bogus register value which can indicate HW removal or PCI fault.
*/
if (pending_irqs && main_irq_cause != 0xffffffffU) {
- if (unlikely((pending_irqs & PCI_ERR) && HAS_PCI(host)))
+ if (unlikely((pending_irqs & PCI_ERR) && !IS_SOC(hpriv)))
handled = mv_pci_error(host, hpriv->base);
else
handled = mv_host_intr(host, pending_irqs);
@@ -2547,7 +2560,7 @@
hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
int fix_phy_mode4 =
hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
- u32 m2, tmp;
+ u32 m2, m3;
if (fix_phy_mode2) {
m2 = readl(port_mmio + PHY_MODE2);
@@ -2564,28 +2577,36 @@
udelay(200);
}
- /* who knows what this magic does */
- tmp = readl(port_mmio + PHY_MODE3);
- tmp &= ~0x7F800000;
- tmp |= 0x2A800000;
- writel(tmp, port_mmio + PHY_MODE3);
+ /*
+ * Gen-II/IIe PHY_MODE3 errata RM#2:
+ * Achieves better receiver noise performance than the h/w default:
+ */
+ m3 = readl(port_mmio + PHY_MODE3);
+ m3 = (m3 & 0x1f) | (0x5555601 << 5);
+
+ /* Guideline 88F5182 (GL# SATA-S11) */
+ if (IS_SOC(hpriv))
+ m3 &= ~0x1c;
if (fix_phy_mode4) {
- u32 m4;
-
- m4 = readl(port_mmio + PHY_MODE4);
-
- if (hp_flags & MV_HP_ERRATA_60X1B2)
- tmp = readl(port_mmio + PHY_MODE3);
-
- /* workaround for errata FEr SATA#10 (part 1) */
- m4 = (m4 & ~(1 << 1)) | (1 << 0);
-
+ u32 m4 = readl(port_mmio + PHY_MODE4);
+ /*
+ * Enforce reserved-bit restrictions on GenIIe devices only.
+ * For earlier chipsets, force only the internal config field
+ * (workaround for errata FEr SATA#10 part 1).
+ */
+ if (IS_GEN_IIE(hpriv))
+ m4 = (m4 & ~PHY_MODE4_RSVD_ZEROS) | PHY_MODE4_RSVD_ONES;
+ else
+ m4 = (m4 & ~PHY_MODE4_CFG_MASK) | PHY_MODE4_CFG_VALUE;
writel(m4, port_mmio + PHY_MODE4);
-
- if (hp_flags & MV_HP_ERRATA_60X1B2)
- writel(tmp, port_mmio + PHY_MODE3);
}
+ /*
+ * Workaround for 60x1-B2 errata SATA#13:
+ * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3,
+ * so we must always rewrite PHY_MODE3 after PHY_MODE4.
+ */
+ writel(m3, port_mmio + PHY_MODE3);
/* Revert values of pre-emphasis and signal amps to the saved ones */
m2 = readl(port_mmio + PHY_MODE2);
@@ -2876,7 +2897,7 @@
void __iomem *mmio = hpriv->base;
u32 reg;
- if (!HAS_PCI(host) || !IS_PCIE(hpriv))
+ if (IS_SOC(hpriv) || !IS_PCIE(hpriv))
return 0; /* not PCI-X capable */
reg = readl(mmio + MV_PCI_MODE_OFS);
if ((reg & MV_PCI_MODE_MASK) == 0)
@@ -3003,10 +3024,7 @@
hp_flags |= MV_HP_CUT_THROUGH;
switch (pdev->revision) {
- case 0x0:
- hp_flags |= MV_HP_ERRATA_XX42A0;
- break;
- case 0x1:
+ case 0x2: /* Rev.B0: the first/only public release */
hp_flags |= MV_HP_ERRATA_60X1C0;
break;
default:
@@ -3018,7 +3036,7 @@
break;
case chip_soc:
hpriv->ops = &mv_soc_ops;
- hp_flags |= MV_HP_ERRATA_60X1C0;
+ hp_flags |= MV_HP_FLAG_SOC | MV_HP_ERRATA_60X1C0;
break;
default:
@@ -3062,12 +3080,12 @@
if (rc)
goto done;
- if (HAS_PCI(host)) {
- hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS;
- hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
- } else {
+ if (IS_SOC(hpriv)) {
hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE_OFS;
hpriv->main_irq_mask_addr = mmio + SOC_HC_MAIN_IRQ_MASK_OFS;
+ } else {
+ hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS;
+ hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
}
/* global interrupt mask: 0 == mask everything */
@@ -3093,7 +3111,7 @@
mv_port_init(&ap->ioaddr, port_mmio);
#ifdef CONFIG_PCI
- if (HAS_PCI(host)) {
+ if (!IS_SOC(hpriv)) {
unsigned int offset = port_mmio - mmio;
ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
@@ -3113,7 +3131,7 @@
writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
}
- if (HAS_PCI(host)) {
+ if (!IS_SOC(hpriv)) {
/* Clear any currently outstanding host interrupt conditions */
writelfl(0, mmio + hpriv->irq_cause_ofs);
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 8ee6b5b4..84ffcc2 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -370,6 +370,7 @@
{ PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 },
{ PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 },
{ PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 },
+ { PCI_VDEVICE(CMD, 0x0244), BID_SIL3132 },
{ PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 },
{ PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 },
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index f277cea..db529b8 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -83,6 +83,7 @@
.inherits = &ata_bmdma_port_ops,
.scr_read = uli_scr_read,
.scr_write = uli_scr_write,
+ .hardreset = ATA_OP_NULL,
};
static const struct ata_port_info uli_port_info = {
diff --git a/drivers/atm/eni.h b/drivers/atm/eni.h
index d04fefb..e4c9525 100644
--- a/drivers/atm/eni.h
+++ b/drivers/atm/eni.h
@@ -18,7 +18,6 @@
#include "midway.h"
-#define KERNEL_OFFSET 0xC0000000 /* kernel 0x0 is at phys 0xC0000000 */
#define DEV_LABEL "eni"
#define UBR_BUFFER (128*1024) /* UBR buffer size */
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index ffc4a5a..ea495b2 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -1542,7 +1542,8 @@
/* initialize framer */
#ifdef CONFIG_ATM_HE_USE_SUNI
- suni_init(he_dev->atm_dev);
+ if (he_isMM(he_dev))
+ suni_init(he_dev->atm_dev);
if (he_dev->atm_dev->phy && he_dev->atm_dev->phy->start)
he_dev->atm_dev->phy->start(he_dev->atm_dev);
#endif /* CONFIG_ATM_HE_USE_SUNI */
@@ -1554,6 +1555,7 @@
val = he_phy_get(he_dev->atm_dev, SUNI_TPOP_APM);
val = (val & ~SUNI_TPOP_APM_S) | (SUNI_TPOP_S_SDH << SUNI_TPOP_APM_S_SHIFT);
he_phy_put(he_dev->atm_dev, val, SUNI_TPOP_APM);
+ he_phy_put(he_dev->atm_dev, SUNI_TACP_IUCHP_CLP, SUNI_TACP_IUCHP);
}
/* 5.1.12 enable transmit and receive */
@@ -2844,10 +2846,15 @@
if (copy_from_user(®, arg,
sizeof(struct he_ioctl_reg)))
return -EFAULT;
-
+
spin_lock_irqsave(&he_dev->global_lock, flags);
switch (reg.type) {
case HE_REGTYPE_PCI:
+ if (reg.addr < 0 || reg.addr >= HE_REGMAP_SIZE) {
+ err = -EINVAL;
+ break;
+ }
+
reg.val = he_readl(he_dev, reg.addr);
break;
case HE_REGTYPE_RCM:
diff --git a/drivers/atm/he.h b/drivers/atm/he.h
index fe6cd15a..b87d6cc 100644
--- a/drivers/atm/he.h
+++ b/drivers/atm/he.h
@@ -267,13 +267,7 @@
char prod_id[30];
char mac_addr[6];
- int media; /*
- * 0x26 = HE155 MM
- * 0x27 = HE622 MM
- * 0x46 = HE155 SM
- * 0x47 = HE622 SM
- */
-
+ int media;
unsigned int vcibits, vpibits;
unsigned int cells_per_row;
@@ -392,6 +386,7 @@
#define HE_DEV(dev) ((struct he_dev *) (dev)->dev_data)
#define he_is622(dev) ((dev)->media & 0x1)
+#define he_isMM(dev) ((dev)->media & 0x20)
#define HE_REGMAP_SIZE 0x100000
@@ -876,8 +871,8 @@
#define M_SN 0x3a /* integer */
#define MEDIA 0x3e /* integer */
#define HE155MM 0x26
-#define HE155SM 0x27
-#define HE622MM 0x46
+#define HE622MM 0x27
+#define HE155SM 0x46
#define HE622SM 0x47
#define MAC_ADDR 0x42 /* char[] */
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 5c28ca7..139fce6 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -2562,17 +2562,11 @@
error = suni_init(dev);
if (error)
goto err_free_rx;
- /*
- * Enable interrupt on loss of signal
- * SUNI_RSOP_CIE - 0x10
- * SUNI_RSOP_CIE_LOSE - 0x04
- */
- ia_phy_put(dev, ia_phy_get(dev, 0x10) | 0x04, 0x10);
-#ifndef MODULE
- error = dev->phy->start(dev);
- if (error)
- goto err_free_rx;
-#endif
+ if (dev->phy->start) {
+ error = dev->phy->start(dev);
+ if (error)
+ goto err_free_rx;
+ }
/* Get iadev->carrier_detect status */
IaFrontEndIntr(iadev);
}
@@ -3198,6 +3192,8 @@
IF_INIT(printk("dev_id = 0x%x iadev->LineRate = %d \n", (u32)dev,
iadev->LineRate);)
+ pci_set_drvdata(pdev, dev);
+
ia_dev[iadev_count] = iadev;
_ia_dev[iadev_count] = dev;
iadev_count++;
@@ -3219,8 +3215,6 @@
iadev->next_board = ia_boards;
ia_boards = dev;
- pci_set_drvdata(pdev, dev);
-
return 0;
err_out_deregister_dev:
@@ -3238,9 +3232,14 @@
struct atm_dev *dev = pci_get_drvdata(pdev);
IADEV *iadev = INPH_IA_DEV(dev);
- ia_phy_put(dev, ia_phy_get(dev,0x10) & ~(0x4), 0x10);
+ /* Disable phy interrupts */
+ ia_phy_put(dev, ia_phy_get(dev, SUNI_RSOP_CIE) & ~(SUNI_RSOP_CIE_LOSE),
+ SUNI_RSOP_CIE);
udelay(1);
+ if (dev->phy && dev->phy->stop)
+ dev->phy->stop(dev);
+
/* De-register device */
free_irq(iadev->irq, dev);
iadev_count--;
diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index 043353b..14b9d5f 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -64,7 +64,7 @@
Amount of time the ks0108 should wait between each control write
to the parallel port.
- If your driver seems to miss random writings, increment this.
+ If your LCD seems to miss random writings, increment this.
If you don't know what I'm talking about, ignore it.
diff --git a/drivers/auxdisplay/cfag12864b.c b/drivers/auxdisplay/cfag12864b.c
index 80bb061..683509f 100644
--- a/drivers/auxdisplay/cfag12864b.c
+++ b/drivers/auxdisplay/cfag12864b.c
@@ -5,7 +5,7 @@
* License: GPLv2
* Depends: ks0108
*
- * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ * Author: Copyright (C) Miguel Ojeda Sandonis
* Date: 2006-10-31
*
* This program is free software; you can redistribute it and/or modify
@@ -398,5 +398,5 @@
module_exit(cfag12864b_exit);
MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Miguel Ojeda Sandonis <maxextreme@gmail.com>");
+MODULE_AUTHOR("Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>");
MODULE_DESCRIPTION("cfag12864b LCD driver");
diff --git a/drivers/auxdisplay/cfag12864bfb.c b/drivers/auxdisplay/cfag12864bfb.c
index 307c190..fe3a865 100644
--- a/drivers/auxdisplay/cfag12864bfb.c
+++ b/drivers/auxdisplay/cfag12864bfb.c
@@ -5,7 +5,7 @@
* License: GPLv2
* Depends: cfag12864b
*
- * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ * Author: Copyright (C) Miguel Ojeda Sandonis
* Date: 2006-10-31
*
* This program is free software; you can redistribute it and/or modify
@@ -186,5 +186,5 @@
module_exit(cfag12864bfb_exit);
MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Miguel Ojeda Sandonis <maxextreme@gmail.com>");
+MODULE_AUTHOR("Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>");
MODULE_DESCRIPTION("cfag12864b LCD framebuffer driver");
diff --git a/drivers/auxdisplay/ks0108.c b/drivers/auxdisplay/ks0108.c
index e6c3646..5b93852 100644
--- a/drivers/auxdisplay/ks0108.c
+++ b/drivers/auxdisplay/ks0108.c
@@ -5,7 +5,7 @@
* License: GPLv2
* Depends: parport
*
- * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ * Author: Copyright (C) Miguel Ojeda Sandonis
* Date: 2006-10-31
*
* This program is free software; you can redistribute it and/or modify
@@ -173,6 +173,6 @@
module_exit(ks0108_exit);
MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Miguel Ojeda Sandonis <maxextreme@gmail.com>");
+MODULE_AUTHOR("Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>");
MODULE_DESCRIPTION("ks0108 LCD Controller driver");
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 422cfca..ee0a51a 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -762,6 +762,7 @@
/**
* dev_set_name - set a device name
* @dev: device
+ * @fmt: format string for the device's name
*/
int dev_set_name(struct device *dev, const char *fmt, ...)
{
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 39f3d1b..0f867a0 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -84,8 +84,8 @@
nid, K(i.totalram),
nid, K(i.freeram),
nid, K(i.totalram - i.freeram),
- nid, node_page_state(nid, NR_ACTIVE),
- nid, node_page_state(nid, NR_INACTIVE),
+ nid, K(node_page_state(nid, NR_ACTIVE)),
+ nid, K(node_page_state(nid, NR_INACTIVE)),
#ifdef CONFIG_HIGHMEM
nid, K(i.totalhigh),
nid, K(i.freehigh),
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index cd03473..a002a38 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -6628,15 +6628,18 @@
* DAC960_gam_ioctl is the ioctl function for performing RAID operations.
*/
-static int DAC960_gam_ioctl(struct inode *inode, struct file *file,
- unsigned int Request, unsigned long Argument)
+static long DAC960_gam_ioctl(struct file *file, unsigned int Request,
+ unsigned long Argument)
{
- int ErrorCode = 0;
+ long ErrorCode = 0;
if (!capable(CAP_SYS_ADMIN)) return -EACCES;
+
+ lock_kernel();
switch (Request)
{
case DAC960_IOCTL_GET_CONTROLLER_COUNT:
- return DAC960_ControllerCount;
+ ErrorCode = DAC960_ControllerCount;
+ break;
case DAC960_IOCTL_GET_CONTROLLER_INFO:
{
DAC960_ControllerInfo_T __user *UserSpaceControllerInfo =
@@ -6644,15 +6647,20 @@
DAC960_ControllerInfo_T ControllerInfo;
DAC960_Controller_T *Controller;
int ControllerNumber;
- if (UserSpaceControllerInfo == NULL) return -EINVAL;
- ErrorCode = get_user(ControllerNumber,
+ if (UserSpaceControllerInfo == NULL)
+ ErrorCode = -EINVAL;
+ else ErrorCode = get_user(ControllerNumber,
&UserSpaceControllerInfo->ControllerNumber);
- if (ErrorCode != 0) return ErrorCode;
+ if (ErrorCode != 0)
+ break;;
+ ErrorCode = -ENXIO;
if (ControllerNumber < 0 ||
- ControllerNumber > DAC960_ControllerCount - 1)
- return -ENXIO;
+ ControllerNumber > DAC960_ControllerCount - 1) {
+ break;
+ }
Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL) return -ENXIO;
+ if (Controller == NULL)
+ break;;
memset(&ControllerInfo, 0, sizeof(DAC960_ControllerInfo_T));
ControllerInfo.ControllerNumber = ControllerNumber;
ControllerInfo.FirmwareType = Controller->FirmwareType;
@@ -6665,8 +6673,9 @@
ControllerInfo.PCI_Address = Controller->PCI_Address;
strcpy(ControllerInfo.ModelName, Controller->ModelName);
strcpy(ControllerInfo.FirmwareVersion, Controller->FirmwareVersion);
- return (copy_to_user(UserSpaceControllerInfo, &ControllerInfo,
+ ErrorCode = (copy_to_user(UserSpaceControllerInfo, &ControllerInfo,
sizeof(DAC960_ControllerInfo_T)) ? -EFAULT : 0);
+ break;
}
case DAC960_IOCTL_V1_EXECUTE_COMMAND:
{
@@ -6684,30 +6693,39 @@
int ControllerNumber, DataTransferLength;
unsigned char *DataTransferBuffer = NULL;
dma_addr_t DataTransferBufferDMA;
- if (UserSpaceUserCommand == NULL) return -EINVAL;
+ if (UserSpaceUserCommand == NULL) {
+ ErrorCode = -EINVAL;
+ break;
+ }
if (copy_from_user(&UserCommand, UserSpaceUserCommand,
sizeof(DAC960_V1_UserCommand_T))) {
ErrorCode = -EFAULT;
- goto Failure1a;
+ break;
}
ControllerNumber = UserCommand.ControllerNumber;
+ ErrorCode = -ENXIO;
if (ControllerNumber < 0 ||
ControllerNumber > DAC960_ControllerCount - 1)
- return -ENXIO;
+ break;
Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL) return -ENXIO;
- if (Controller->FirmwareType != DAC960_V1_Controller) return -EINVAL;
+ if (Controller == NULL)
+ break;
+ ErrorCode = -EINVAL;
+ if (Controller->FirmwareType != DAC960_V1_Controller)
+ break;
CommandOpcode = UserCommand.CommandMailbox.Common.CommandOpcode;
DataTransferLength = UserCommand.DataTransferLength;
- if (CommandOpcode & 0x80) return -EINVAL;
+ if (CommandOpcode & 0x80)
+ break;
if (CommandOpcode == DAC960_V1_DCDB)
{
if (copy_from_user(&DCDB, UserCommand.DCDB,
sizeof(DAC960_V1_DCDB_T))) {
ErrorCode = -EFAULT;
- goto Failure1a;
+ break;
}
- if (DCDB.Channel >= DAC960_V1_MaxChannels) return -EINVAL;
+ if (DCDB.Channel >= DAC960_V1_MaxChannels)
+ break;
if (!((DataTransferLength == 0 &&
DCDB.Direction
== DAC960_V1_DCDB_NoDataTransfer) ||
@@ -6717,38 +6735,37 @@
(DataTransferLength < 0 &&
DCDB.Direction
== DAC960_V1_DCDB_DataTransferSystemToDevice)))
- return -EINVAL;
+ break;
if (((DCDB.TransferLengthHigh4 << 16) | DCDB.TransferLength)
!= abs(DataTransferLength))
- return -EINVAL;
+ break;
DCDB_IOBUF = pci_alloc_consistent(Controller->PCIDevice,
sizeof(DAC960_V1_DCDB_T), &DCDB_IOBUFDMA);
- if (DCDB_IOBUF == NULL)
- return -ENOMEM;
+ if (DCDB_IOBUF == NULL) {
+ ErrorCode = -ENOMEM;
+ break;
+ }
}
+ ErrorCode = -ENOMEM;
if (DataTransferLength > 0)
{
DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
DataTransferLength, &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL) {
- ErrorCode = -ENOMEM;
- goto Failure1;
- }
+ if (DataTransferBuffer == NULL)
+ break;
memset(DataTransferBuffer, 0, DataTransferLength);
}
else if (DataTransferLength < 0)
{
DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
-DataTransferLength, &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL) {
- ErrorCode = -ENOMEM;
- goto Failure1;
- }
+ if (DataTransferBuffer == NULL)
+ break;
if (copy_from_user(DataTransferBuffer,
UserCommand.DataTransferBuffer,
-DataTransferLength)) {
ErrorCode = -EFAULT;
- goto Failure1;
+ break;
}
}
if (CommandOpcode == DAC960_V1_DCDB)
@@ -6825,8 +6842,7 @@
if (DCDB_IOBUF != NULL)
pci_free_consistent(Controller->PCIDevice, sizeof(DAC960_V1_DCDB_T),
DCDB_IOBUF, DCDB_IOBUFDMA);
- Failure1a:
- return ErrorCode;
+ break;
}
case DAC960_IOCTL_V2_EXECUTE_COMMAND:
{
@@ -6844,32 +6860,43 @@
dma_addr_t DataTransferBufferDMA;
unsigned char *RequestSenseBuffer = NULL;
dma_addr_t RequestSenseBufferDMA;
- if (UserSpaceUserCommand == NULL) return -EINVAL;
+
+ ErrorCode = -EINVAL;
+ if (UserSpaceUserCommand == NULL)
+ break;
if (copy_from_user(&UserCommand, UserSpaceUserCommand,
sizeof(DAC960_V2_UserCommand_T))) {
ErrorCode = -EFAULT;
- goto Failure2a;
+ break;
}
+ ErrorCode = -ENXIO;
ControllerNumber = UserCommand.ControllerNumber;
if (ControllerNumber < 0 ||
ControllerNumber > DAC960_ControllerCount - 1)
- return -ENXIO;
+ break;
Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL) return -ENXIO;
- if (Controller->FirmwareType != DAC960_V2_Controller) return -EINVAL;
+ if (Controller == NULL)
+ break;
+ if (Controller->FirmwareType != DAC960_V2_Controller){
+ ErrorCode = -EINVAL;
+ break;
+ }
DataTransferLength = UserCommand.DataTransferLength;
+ ErrorCode = -ENOMEM;
if (DataTransferLength > 0)
{
DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
DataTransferLength, &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL) return -ENOMEM;
+ if (DataTransferBuffer == NULL)
+ break;
memset(DataTransferBuffer, 0, DataTransferLength);
}
else if (DataTransferLength < 0)
{
DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
-DataTransferLength, &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL) return -ENOMEM;
+ if (DataTransferBuffer == NULL)
+ break;
if (copy_from_user(DataTransferBuffer,
UserCommand.DataTransferBuffer,
-DataTransferLength)) {
@@ -6979,8 +7006,7 @@
if (RequestSenseBuffer != NULL)
pci_free_consistent(Controller->PCIDevice, RequestSenseLength,
RequestSenseBuffer, RequestSenseBufferDMA);
- Failure2a:
- return ErrorCode;
+ break;
}
case DAC960_IOCTL_V2_GET_HEALTH_STATUS:
{
@@ -6990,21 +7016,33 @@
DAC960_V2_HealthStatusBuffer_T HealthStatusBuffer;
DAC960_Controller_T *Controller;
int ControllerNumber;
- if (UserSpaceGetHealthStatus == NULL) return -EINVAL;
+ if (UserSpaceGetHealthStatus == NULL) {
+ ErrorCode = -EINVAL;
+ break;
+ }
if (copy_from_user(&GetHealthStatus, UserSpaceGetHealthStatus,
- sizeof(DAC960_V2_GetHealthStatus_T)))
- return -EFAULT;
+ sizeof(DAC960_V2_GetHealthStatus_T))) {
+ ErrorCode = -EFAULT;
+ break;
+ }
+ ErrorCode = -ENXIO;
ControllerNumber = GetHealthStatus.ControllerNumber;
if (ControllerNumber < 0 ||
ControllerNumber > DAC960_ControllerCount - 1)
- return -ENXIO;
+ break;
Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL) return -ENXIO;
- if (Controller->FirmwareType != DAC960_V2_Controller) return -EINVAL;
+ if (Controller == NULL)
+ break;
+ if (Controller->FirmwareType != DAC960_V2_Controller) {
+ ErrorCode = -EINVAL;
+ break;
+ }
if (copy_from_user(&HealthStatusBuffer,
GetHealthStatus.HealthStatusBuffer,
- sizeof(DAC960_V2_HealthStatusBuffer_T)))
- return -EFAULT;
+ sizeof(DAC960_V2_HealthStatusBuffer_T))) {
+ ErrorCode = -EFAULT;
+ break;
+ }
while (Controller->V2.HealthStatusBuffer->StatusChangeCounter
== HealthStatusBuffer.StatusChangeCounter &&
Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
@@ -7012,21 +7050,28 @@
{
interruptible_sleep_on_timeout(&Controller->HealthStatusWaitQueue,
DAC960_MonitoringTimerInterval);
- if (signal_pending(current)) return -EINTR;
+ if (signal_pending(current)) {
+ ErrorCode = -EINTR;
+ break;
+ }
}
if (copy_to_user(GetHealthStatus.HealthStatusBuffer,
Controller->V2.HealthStatusBuffer,
sizeof(DAC960_V2_HealthStatusBuffer_T)))
- return -EFAULT;
- return 0;
+ ErrorCode = -EFAULT;
+ else
+ ErrorCode = 0;
}
+ default:
+ ErrorCode = -ENOTTY;
}
- return -EINVAL;
+ unlock_kernel();
+ return ErrorCode;
}
static const struct file_operations DAC960_gam_fops = {
.owner = THIS_MODULE,
- .ioctl = DAC960_gam_ioctl
+ .unlocked_ioctl = DAC960_gam_ioctl
};
static struct miscdevice DAC960_gam_dev = {
diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index 41f818b..2f17462 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -1003,7 +1003,7 @@
* Enough people have their dip switches set backwards to
* warrant a loud message for this special case.
*/
- aoemajor = be16_to_cpu(get_unaligned(&h->major));
+ aoemajor = get_unaligned_be16(&h->major);
if (aoemajor == 0xfff) {
printk(KERN_ERR "aoe: Warning: shelf address is all ones. "
"Check shelf dip switches.\n");
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 680cdfc..24b97b0 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -397,6 +397,7 @@
MODULE_PARM_DESC(max_part, "Maximum number of partitions per RAM disk");
MODULE_LICENSE("GPL");
MODULE_ALIAS_BLOCKDEV_MAJOR(RAMDISK_MAJOR);
+MODULE_ALIAS("rd");
#ifndef MODULE
/* Legacy boot options - nonmodular */
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index e336b05..d81632c 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -53,15 +53,16 @@
#include <linux/scatterlist.h>
#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-#define DRIVER_NAME "HP CISS Driver (v 3.6.14)"
-#define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,14)
+#define DRIVER_NAME "HP CISS Driver (v 3.6.20)"
+#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 20)
/* Embedded module documentation macros - see modules.h */
MODULE_AUTHOR("Hewlett-Packard Company");
-MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.14");
+MODULE_DESCRIPTION("Driver for HP Smart Array Controllers");
MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
- " SA6i P600 P800 P400 P400i E200 E200i E500");
-MODULE_VERSION("3.6.14");
+ " SA6i P600 P800 P400 P400i E200 E200i E500 P700m"
+ " Smart Array G2 Series SAS/SATA Controllers");
+MODULE_VERSION("3.6.20");
MODULE_LICENSE("GPL");
#include "cciss_cmd.h"
@@ -90,6 +91,11 @@
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
{PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
@@ -100,30 +106,34 @@
/* board_id = Subsystem Device ID & Vendor ID
* product = Marketing Name for the board
* access = Address of the struct of function pointers
- * nr_cmds = Number of commands supported by controller
*/
static struct board_type products[] = {
- {0x40700E11, "Smart Array 5300", &SA5_access, 512},
- {0x40800E11, "Smart Array 5i", &SA5B_access, 512},
- {0x40820E11, "Smart Array 532", &SA5B_access, 512},
- {0x40830E11, "Smart Array 5312", &SA5B_access, 512},
- {0x409A0E11, "Smart Array 641", &SA5_access, 512},
- {0x409B0E11, "Smart Array 642", &SA5_access, 512},
- {0x409C0E11, "Smart Array 6400", &SA5_access, 512},
- {0x409D0E11, "Smart Array 6400 EM", &SA5_access, 512},
- {0x40910E11, "Smart Array 6i", &SA5_access, 512},
- {0x3225103C, "Smart Array P600", &SA5_access, 512},
- {0x3223103C, "Smart Array P800", &SA5_access, 512},
- {0x3234103C, "Smart Array P400", &SA5_access, 512},
- {0x3235103C, "Smart Array P400i", &SA5_access, 512},
- {0x3211103C, "Smart Array E200i", &SA5_access, 120},
- {0x3212103C, "Smart Array E200", &SA5_access, 120},
- {0x3213103C, "Smart Array E200i", &SA5_access, 120},
- {0x3214103C, "Smart Array E200i", &SA5_access, 120},
- {0x3215103C, "Smart Array E200i", &SA5_access, 120},
- {0x3237103C, "Smart Array E500", &SA5_access, 512},
- {0x323D103C, "Smart Array P700m", &SA5_access, 512},
- {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120},
+ {0x40700E11, "Smart Array 5300", &SA5_access},
+ {0x40800E11, "Smart Array 5i", &SA5B_access},
+ {0x40820E11, "Smart Array 532", &SA5B_access},
+ {0x40830E11, "Smart Array 5312", &SA5B_access},
+ {0x409A0E11, "Smart Array 641", &SA5_access},
+ {0x409B0E11, "Smart Array 642", &SA5_access},
+ {0x409C0E11, "Smart Array 6400", &SA5_access},
+ {0x409D0E11, "Smart Array 6400 EM", &SA5_access},
+ {0x40910E11, "Smart Array 6i", &SA5_access},
+ {0x3225103C, "Smart Array P600", &SA5_access},
+ {0x3223103C, "Smart Array P800", &SA5_access},
+ {0x3234103C, "Smart Array P400", &SA5_access},
+ {0x3235103C, "Smart Array P400i", &SA5_access},
+ {0x3211103C, "Smart Array E200i", &SA5_access},
+ {0x3212103C, "Smart Array E200", &SA5_access},
+ {0x3213103C, "Smart Array E200i", &SA5_access},
+ {0x3214103C, "Smart Array E200i", &SA5_access},
+ {0x3215103C, "Smart Array E200i", &SA5_access},
+ {0x3237103C, "Smart Array E500", &SA5_access},
+ {0x323D103C, "Smart Array P700m", &SA5_access},
+ {0x3241103C, "Smart Array P212", &SA5_access},
+ {0x3243103C, "Smart Array P410", &SA5_access},
+ {0x3245103C, "Smart Array P410i", &SA5_access},
+ {0x3247103C, "Smart Array P411", &SA5_access},
+ {0x3249103C, "Smart Array P812", &SA5_access},
+ {0xFFFF103C, "Unknown Smart Array", &SA5_access},
};
/* How long to wait (in milliseconds) for board to go into simple mode */
@@ -3075,11 +3085,20 @@
print_cfg_table(c->cfgtable);
#endif /* CCISS_DEBUG */
+ /* Some controllers support Zero Memory Raid (ZMR).
+ * When configured in ZMR mode the number of supported
+ * commands drops to 64. So instead of just setting an
+ * arbitrary value we make the driver a little smarter.
+ * We read the config table to tell us how many commands
+ * are supported on the controller then subtract 4 to
+ * leave a little room for ioctl calls.
+ */
+ c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
for (i = 0; i < ARRAY_SIZE(products); i++) {
if (board_id == products[i].board_id) {
c->product_name = products[i].product_name;
c->access = *(products[i].access);
- c->nr_cmds = products[i].nr_cmds;
+ c->nr_cmds = c->max_commands - 4;
break;
}
}
@@ -3099,7 +3118,7 @@
if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
c->product_name = products[i-1].product_name;
c->access = *(products[i-1].access);
- c->nr_cmds = products[i-1].nr_cmds;
+ c->nr_cmds = c->max_commands - 4;
printk(KERN_WARNING "cciss: This is an unknown "
"Smart Array controller.\n"
"cciss: Please update to the latest driver "
@@ -3535,6 +3554,10 @@
for (j = 0; j <= hba[i]->highest_lun; j++)
add_disk(hba[i]->gendisk[j]);
+ /* we must register the controller even if no disks exist */
+ if (hba[i]->highest_lun == -1)
+ add_disk(hba[i]->gendisk[0]);
+
return 1;
clean4:
diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c
index 8b9549a..27455ee 100644
--- a/drivers/block/paride/pt.c
+++ b/drivers/block/paride/pt.c
@@ -146,6 +146,7 @@
#include <linux/mtio.h>
#include <linux/device.h>
#include <linux/sched.h> /* current, TASK_*, schedule_timeout() */
+#include <linux/smp_lock.h>
#include <asm/uaccess.h>
@@ -189,8 +190,7 @@
#define ATAPI_LOG_SENSE 0x4d
static int pt_open(struct inode *inode, struct file *file);
-static int pt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg);
+static long pt_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
static int pt_release(struct inode *inode, struct file *file);
static ssize_t pt_read(struct file *filp, char __user *buf,
size_t count, loff_t * ppos);
@@ -236,7 +236,7 @@
.owner = THIS_MODULE,
.read = pt_read,
.write = pt_write,
- .ioctl = pt_ioctl,
+ .unlocked_ioctl = pt_ioctl,
.open = pt_open,
.release = pt_release,
};
@@ -685,8 +685,7 @@
return err;
}
-static int pt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long pt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
struct pt_unit *tape = file->private_data;
struct mtop __user *p = (void __user *)arg;
@@ -700,23 +699,26 @@
switch (mtop.mt_op) {
case MTREW:
+ lock_kernel();
pt_rewind(tape);
+ unlock_kernel();
return 0;
case MTWEOF:
+ lock_kernel();
pt_write_fm(tape);
+ unlock_kernel();
return 0;
default:
- printk("%s: Unimplemented mt_op %d\n", tape->name,
+ /* FIXME: rate limit ?? */
+ printk(KERN_DEBUG "%s: Unimplemented mt_op %d\n", tape->name,
mtop.mt_op);
return -EINVAL;
}
default:
- printk("%s: Unimplemented ioctl 0x%x\n", tape->name, cmd);
- return -EINVAL;
-
+ return -ENOTTY;
}
}
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 3ba1df9..45bee91 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -49,6 +49,7 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/kthread.h>
+#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/spinlock.h>
#include <linux/file.h>
@@ -2079,7 +2080,6 @@
unsigned char buf[64];
int ret;
- memset(buf, 0, sizeof(buf));
init_cdrom_command(&cgc, buf, sizeof(buf), CGC_DATA_READ);
cgc.sense = &sense;
cgc.buflen = pd->mode_offset + 12;
@@ -2126,7 +2126,6 @@
unsigned char *cap_buf;
int ret, offset;
- memset(buf, 0, sizeof(buf));
cap_buf = &buf[sizeof(struct mode_page_header) + pd->mode_offset];
init_cdrom_command(&cgc, buf, sizeof(buf), CGC_DATA_UNKNOWN);
cgc.sense = &sense;
@@ -2633,11 +2632,12 @@
-static int pkt_merge_bvec(struct request_queue *q, struct bio *bio, struct bio_vec *bvec)
+static int pkt_merge_bvec(struct request_queue *q, struct bvec_merge_data *bmd,
+ struct bio_vec *bvec)
{
struct pktcdvd_device *pd = q->queuedata;
- sector_t zone = ZONE(bio->bi_sector, pd);
- int used = ((bio->bi_sector - zone) << 9) + bio->bi_size;
+ sector_t zone = ZONE(bmd->bi_sector, pd);
+ int used = ((bmd->bi_sector - zone) << 9) + bmd->bi_size;
int remaining = (pd->settings.size << 9) - used;
int remaining2;
@@ -2645,7 +2645,7 @@
* A bio <= PAGE_SIZE must be allowed. If it crosses a packet
* boundary, pkt_make_request() will split the bio.
*/
- remaining2 = PAGE_SIZE - bio->bi_size;
+ remaining2 = PAGE_SIZE - bmd->bi_size;
remaining = max(remaining, remaining2);
BUG_ON(remaining < 0);
@@ -2796,9 +2796,14 @@
return ret;
}
-static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long pkt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
- struct pktcdvd_device *pd = inode->i_bdev->bd_disk->private_data;
+ struct inode *inode = file->f_path.dentry->d_inode;
+ struct pktcdvd_device *pd;
+ long ret;
+
+ lock_kernel();
+ pd = inode->i_bdev->bd_disk->private_data;
VPRINTK("pkt_ioctl: cmd %x, dev %d:%d\n", cmd, imajor(inode), iminor(inode));
@@ -2811,7 +2816,8 @@
case CDROM_LAST_WRITTEN:
case CDROM_SEND_PACKET:
case SCSI_IOCTL_SEND_COMMAND:
- return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
+ ret = blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
+ break;
case CDROMEJECT:
/*
@@ -2820,14 +2826,15 @@
*/
if (pd->refcnt == 1)
pkt_lock_door(pd, 0);
- return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
+ ret = blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
+ break;
default:
VPRINTK(DRIVER_NAME": Unknown ioctl for %s (%x)\n", pd->name, cmd);
- return -ENOTTY;
+ ret = -ENOTTY;
}
-
- return 0;
+ unlock_kernel();
+ return ret;
}
static int pkt_media_changed(struct gendisk *disk)
@@ -2849,7 +2856,7 @@
.owner = THIS_MODULE,
.open = pkt_open,
.release = pkt_close,
- .ioctl = pkt_ioctl,
+ .unlocked_ioctl = pkt_ioctl,
.media_changed = pkt_media_changed,
};
@@ -3014,7 +3021,8 @@
mutex_unlock(&ctl_mutex);
}
-static int pkt_ctl_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long pkt_ctl_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
void __user *argp = (void __user *)arg;
struct pkt_ctrl_command ctrl_cmd;
@@ -3031,16 +3039,22 @@
case PKT_CTRL_CMD_SETUP:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
+ lock_kernel();
ret = pkt_setup_dev(new_decode_dev(ctrl_cmd.dev), &pkt_dev);
ctrl_cmd.pkt_dev = new_encode_dev(pkt_dev);
+ unlock_kernel();
break;
case PKT_CTRL_CMD_TEARDOWN:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
+ lock_kernel();
ret = pkt_remove_dev(new_decode_dev(ctrl_cmd.pkt_dev));
+ unlock_kernel();
break;
case PKT_CTRL_CMD_STATUS:
+ lock_kernel();
pkt_get_status(&ctrl_cmd);
+ unlock_kernel();
break;
default:
return -ENOTTY;
@@ -3053,7 +3067,7 @@
static const struct file_operations pkt_ctl_fops = {
- .ioctl = pkt_ctl_ioctl,
+ .unlocked_ioctl = pkt_ctl_ioctl,
.owner = THIS_MODULE,
};
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 84e064f..dd7ea20 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -260,6 +260,10 @@
if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER))
blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL);
+ /* If disk is read-only in the host, the guest should obey */
+ if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO))
+ set_disk_ro(vblk->disk, 1);
+
/* Host must always specify the capacity. */
vdev->config->get(vdev, offsetof(struct virtio_blk_config, capacity),
&cap, sizeof(cap));
@@ -311,6 +315,7 @@
/* Stop all the virtqueues. */
vdev->config->reset(vdev);
+ del_gendisk(vblk->disk);
blk_cleanup_queue(vblk->disk->queue);
put_disk(vblk->disk);
mempool_destroy(vblk->pool);
@@ -325,7 +330,7 @@
static unsigned int features[] = {
VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX,
- VIRTIO_BLK_F_GEOMETRY,
+ VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO,
};
static struct virtio_driver virtio_blk = {
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index f2fff57..9ae05c5 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -38,6 +38,7 @@
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
+#include <linux/cdrom.h>
#include <linux/module.h>
#include <xen/xenbus.h>
@@ -153,6 +154,40 @@
return 0;
}
+int blkif_ioctl(struct inode *inode, struct file *filep,
+ unsigned command, unsigned long argument)
+{
+ struct blkfront_info *info =
+ inode->i_bdev->bd_disk->private_data;
+ int i;
+
+ dev_dbg(&info->xbdev->dev, "command: 0x%x, argument: 0x%lx\n",
+ command, (long)argument);
+
+ switch (command) {
+ case CDROMMULTISESSION:
+ dev_dbg(&info->xbdev->dev, "FIXME: support multisession CDs later\n");
+ for (i = 0; i < sizeof(struct cdrom_multisession); i++)
+ if (put_user(0, (char __user *)(argument + i)))
+ return -EFAULT;
+ return 0;
+
+ case CDROM_GET_CAPABILITY: {
+ struct gendisk *gd = info->gd;
+ if (gd->flags & GENHD_FL_CD)
+ return 0;
+ return -EINVAL;
+ }
+
+ default:
+ /*printk(KERN_ALERT "ioctl %08x not supported by Xen blkdev\n",
+ command);*/
+ return -EINVAL; /* same return as native Linux */
+ }
+
+ return 0;
+}
+
/*
* blkif_queue_request
*
@@ -324,6 +359,9 @@
/* Make sure buffer addresses are sector-aligned. */
blk_queue_dma_alignment(rq, 511);
+ /* Make sure we don't use bounce buffers. */
+ blk_queue_bounce_limit(rq, BLK_BOUNCE_ANY);
+
gd->queue = rq;
return 0;
@@ -546,7 +584,7 @@
info->ring_ref = GRANT_INVALID_REF;
- sring = (struct blkif_sring *)__get_free_page(GFP_KERNEL);
+ sring = (struct blkif_sring *)__get_free_page(GFP_NOIO | __GFP_HIGH);
if (!sring) {
xenbus_dev_fatal(dev, -ENOMEM, "allocating shared ring");
return -ENOMEM;
@@ -703,7 +741,8 @@
int j;
/* Stage 1: Make a safe copy of the shadow state. */
- copy = kmalloc(sizeof(info->shadow), GFP_KERNEL);
+ copy = kmalloc(sizeof(info->shadow),
+ GFP_NOIO | __GFP_REPEAT | __GFP_HIGH);
if (!copy)
return -ENOMEM;
memcpy(copy, info->shadow, sizeof(info->shadow));
@@ -959,7 +998,7 @@
struct xenbus_device *dev = info->xbdev;
enum xenbus_state state = xenbus_read_driver_state(dev->otherend);
- if (state == XenbusStateClosing)
+ if (state == XenbusStateClosing && info->is_ready)
blkfront_closing(dev);
}
return 0;
@@ -971,6 +1010,7 @@
.open = blkif_open,
.release = blkif_release,
.getgeo = blkif_getgeo,
+ .ioctl = blkif_ioctl,
};
@@ -1006,7 +1046,7 @@
module_init(xlblk_init);
-static void xlblk_exit(void)
+static void __exit xlblk_exit(void)
{
return xenbus_unregister_driver(&blkfront);
}
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index 69f26eb..a5da356 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -461,37 +461,27 @@
struct media_event_desc *med)
{
struct packet_command cgc;
- unsigned char *buffer;
- struct event_header *eh;
- int ret = 1;
+ unsigned char buffer[8];
+ struct event_header *eh = (struct event_header *) buffer;
- buffer = kmalloc(8, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
- eh = (struct event_header *)buffer;
-
- init_cdrom_command(&cgc, buffer, 8, CGC_DATA_READ);
+ init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_READ);
cgc.cmd[0] = GPCMD_GET_EVENT_STATUS_NOTIFICATION;
cgc.cmd[1] = 1; /* IMMED */
cgc.cmd[4] = 1 << 4; /* media event */
- cgc.cmd[8] = 8;
+ cgc.cmd[8] = sizeof(buffer);
cgc.quiet = 1;
if (cdi->ops->generic_packet(cdi, &cgc))
- goto err;
+ return 1;
if (be16_to_cpu(eh->data_len) < sizeof(*med))
- goto err;
+ return 1;
if (eh->nea || eh->notification_class != 0x4)
- goto err;
+ return 1;
- memcpy(med, buffer + sizeof(*eh), sizeof(*med));
- ret = 0;
-err:
- kfree(buffer);
- return ret;
+ memcpy(med, &buffer[sizeof(*eh)], sizeof(*med));
+ return 0;
}
/*
@@ -501,82 +491,68 @@
static int cdrom_mrw_probe_pc(struct cdrom_device_info *cdi)
{
struct packet_command cgc;
- char *buffer;
- int ret = 1;
+ char buffer[16];
- buffer = kmalloc(16, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
- init_cdrom_command(&cgc, buffer, 16, CGC_DATA_READ);
+ init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_READ);
cgc.timeout = HZ;
cgc.quiet = 1;
if (!cdrom_mode_sense(cdi, &cgc, MRW_MODE_PC, 0)) {
cdi->mrw_mode_page = MRW_MODE_PC;
- ret = 0;
+ return 0;
} else if (!cdrom_mode_sense(cdi, &cgc, MRW_MODE_PC_PRE1, 0)) {
cdi->mrw_mode_page = MRW_MODE_PC_PRE1;
- ret = 0;
+ return 0;
}
- kfree(buffer);
- return ret;
+
+ return 1;
}
static int cdrom_is_mrw(struct cdrom_device_info *cdi, int *write)
{
struct packet_command cgc;
struct mrw_feature_desc *mfd;
- unsigned char *buffer;
+ unsigned char buffer[16];
int ret;
*write = 0;
- buffer = kmalloc(16, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
- init_cdrom_command(&cgc, buffer, 16, CGC_DATA_READ);
+ init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_READ);
cgc.cmd[0] = GPCMD_GET_CONFIGURATION;
cgc.cmd[3] = CDF_MRW;
- cgc.cmd[8] = 16;
+ cgc.cmd[8] = sizeof(buffer);
cgc.quiet = 1;
if ((ret = cdi->ops->generic_packet(cdi, &cgc)))
- goto err;
+ return ret;
mfd = (struct mrw_feature_desc *)&buffer[sizeof(struct feature_header)];
- if (be16_to_cpu(mfd->feature_code) != CDF_MRW) {
- ret = 1;
- goto err;
- }
+ if (be16_to_cpu(mfd->feature_code) != CDF_MRW)
+ return 1;
*write = mfd->write;
if ((ret = cdrom_mrw_probe_pc(cdi))) {
*write = 0;
+ return ret;
}
-err:
- kfree(buffer);
- return ret;
+
+ return 0;
}
static int cdrom_mrw_bgformat(struct cdrom_device_info *cdi, int cont)
{
struct packet_command cgc;
- unsigned char *buffer;
+ unsigned char buffer[12];
int ret;
printk(KERN_INFO "cdrom: %sstarting format\n", cont ? "Re" : "");
- buffer = kmalloc(12, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
/*
* FmtData bit set (bit 4), format type is 1
*/
- init_cdrom_command(&cgc, buffer, 12, CGC_DATA_WRITE);
+ init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_WRITE);
cgc.cmd[0] = GPCMD_FORMAT_UNIT;
cgc.cmd[1] = (1 << 4) | 1;
@@ -603,7 +579,6 @@
if (ret)
printk(KERN_INFO "cdrom: bgformat failed\n");
- kfree(buffer);
return ret;
}
@@ -663,17 +638,16 @@
{
struct packet_command cgc;
struct mode_page_header *mph;
- char *buffer;
+ char buffer[16];
int ret, offset, size;
- buffer = kmalloc(16, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
+ init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_READ);
- init_cdrom_command(&cgc, buffer, 16, CGC_DATA_READ);
+ cgc.buffer = buffer;
+ cgc.buflen = sizeof(buffer);
if ((ret = cdrom_mode_sense(cdi, &cgc, cdi->mrw_mode_page, 0)))
- goto err;
+ return ret;
mph = (struct mode_page_header *) buffer;
offset = be16_to_cpu(mph->desc_length);
@@ -683,70 +657,55 @@
cgc.buflen = size;
if ((ret = cdrom_mode_select(cdi, &cgc)))
- goto err;
+ return ret;
printk(KERN_INFO "cdrom: %s: mrw address space %s selected\n", cdi->name, mrw_address_space[space]);
- ret = 0;
-err:
- kfree(buffer);
- return ret;
+ return 0;
}
static int cdrom_get_random_writable(struct cdrom_device_info *cdi,
struct rwrt_feature_desc *rfd)
{
struct packet_command cgc;
- char *buffer;
+ char buffer[24];
int ret;
- buffer = kmalloc(24, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
- init_cdrom_command(&cgc, buffer, 24, CGC_DATA_READ);
+ init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_READ);
cgc.cmd[0] = GPCMD_GET_CONFIGURATION; /* often 0x46 */
cgc.cmd[3] = CDF_RWRT; /* often 0x0020 */
- cgc.cmd[8] = 24; /* often 0x18 */
+ cgc.cmd[8] = sizeof(buffer); /* often 0x18 */
cgc.quiet = 1;
if ((ret = cdi->ops->generic_packet(cdi, &cgc)))
- goto err;
+ return ret;
memcpy(rfd, &buffer[sizeof(struct feature_header)], sizeof (*rfd));
- ret = 0;
-err:
- kfree(buffer);
- return ret;
+ return 0;
}
static int cdrom_has_defect_mgt(struct cdrom_device_info *cdi)
{
struct packet_command cgc;
- char *buffer;
+ char buffer[16];
__be16 *feature_code;
int ret;
- buffer = kmalloc(16, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
- init_cdrom_command(&cgc, buffer, 16, CGC_DATA_READ);
+ init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_READ);
cgc.cmd[0] = GPCMD_GET_CONFIGURATION;
cgc.cmd[3] = CDF_HWDM;
- cgc.cmd[8] = 16;
+ cgc.cmd[8] = sizeof(buffer);
cgc.quiet = 1;
if ((ret = cdi->ops->generic_packet(cdi, &cgc)))
- goto err;
+ return ret;
feature_code = (__be16 *) &buffer[sizeof(struct feature_header)];
if (be16_to_cpu(*feature_code) == CDF_HWDM)
- ret = 0;
-err:
- kfree(buffer);
- return ret;
+ return 0;
+
+ return 1;
}
@@ -837,14 +796,10 @@
static int mo_open_write(struct cdrom_device_info *cdi)
{
struct packet_command cgc;
- char *buffer;
+ char buffer[255];
int ret;
- buffer = kmalloc(255, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
- init_cdrom_command(&cgc, buffer, 4, CGC_DATA_READ);
+ init_cdrom_command(&cgc, &buffer, 4, CGC_DATA_READ);
cgc.quiet = 1;
/*
@@ -861,15 +816,10 @@
}
/* drive gave us no info, let the user go ahead */
- if (ret) {
- ret = 0;
- goto err;
- }
+ if (ret)
+ return 0;
- ret = buffer[3] & 0x80;
-err:
- kfree(buffer);
- return ret;
+ return buffer[3] & 0x80;
}
static int cdrom_ram_open_write(struct cdrom_device_info *cdi)
@@ -892,19 +842,15 @@
static void cdrom_mmc3_profile(struct cdrom_device_info *cdi)
{
struct packet_command cgc;
- char *buffer;
+ char buffer[32];
int ret, mmc3_profile;
- buffer = kmalloc(32, GFP_KERNEL);
- if (!buffer)
- return;
-
- init_cdrom_command(&cgc, buffer, 32, CGC_DATA_READ);
+ init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_READ);
cgc.cmd[0] = GPCMD_GET_CONFIGURATION;
cgc.cmd[1] = 0;
cgc.cmd[2] = cgc.cmd[3] = 0; /* Starting Feature Number */
- cgc.cmd[8] = 32; /* Allocation Length */
+ cgc.cmd[8] = sizeof(buffer); /* Allocation Length */
cgc.quiet = 1;
if ((ret = cdi->ops->generic_packet(cdi, &cgc)))
@@ -913,7 +859,6 @@
mmc3_profile = (buffer[6] << 8) | buffer[7];
cdi->mmc3_profile = mmc3_profile;
- kfree(buffer);
}
static int cdrom_is_dvd_rw(struct cdrom_device_info *cdi)
@@ -1628,15 +1573,12 @@
static int dvd_do_auth(struct cdrom_device_info *cdi, dvd_authinfo *ai)
{
int ret;
- u_char *buf;
+ u_char buf[20];
struct packet_command cgc;
struct cdrom_device_ops *cdo = cdi->ops;
- rpc_state_t *rpc_state;
+ rpc_state_t rpc_state;
- buf = kzalloc(20, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
+ memset(buf, 0, sizeof(buf));
init_cdrom_command(&cgc, buf, 0, CGC_DATA_READ);
switch (ai->type) {
@@ -1647,7 +1589,7 @@
setup_report_key(&cgc, ai->lsa.agid, 0);
if ((ret = cdo->generic_packet(cdi, &cgc)))
- goto err;
+ return ret;
ai->lsa.agid = buf[7] >> 6;
/* Returning data, let host change state */
@@ -1658,7 +1600,7 @@
setup_report_key(&cgc, ai->lsk.agid, 2);
if ((ret = cdo->generic_packet(cdi, &cgc)))
- goto err;
+ return ret;
copy_key(ai->lsk.key, &buf[4]);
/* Returning data, let host change state */
@@ -1669,7 +1611,7 @@
setup_report_key(&cgc, ai->lsc.agid, 1);
if ((ret = cdo->generic_packet(cdi, &cgc)))
- goto err;
+ return ret;
copy_chal(ai->lsc.chal, &buf[4]);
/* Returning data, let host change state */
@@ -1686,7 +1628,7 @@
cgc.cmd[2] = ai->lstk.lba >> 24;
if ((ret = cdo->generic_packet(cdi, &cgc)))
- goto err;
+ return ret;
ai->lstk.cpm = (buf[4] >> 7) & 1;
ai->lstk.cp_sec = (buf[4] >> 6) & 1;
@@ -1700,7 +1642,7 @@
setup_report_key(&cgc, ai->lsasf.agid, 5);
if ((ret = cdo->generic_packet(cdi, &cgc)))
- goto err;
+ return ret;
ai->lsasf.asf = buf[7] & 1;
break;
@@ -1713,7 +1655,7 @@
copy_chal(&buf[4], ai->hsc.chal);
if ((ret = cdo->generic_packet(cdi, &cgc)))
- goto err;
+ return ret;
ai->type = DVD_LU_SEND_KEY1;
break;
@@ -1726,7 +1668,7 @@
if ((ret = cdo->generic_packet(cdi, &cgc))) {
ai->type = DVD_AUTH_FAILURE;
- goto err;
+ return ret;
}
ai->type = DVD_AUTH_ESTABLISHED;
break;
@@ -1737,23 +1679,24 @@
cdinfo(CD_DVD, "entering DVD_INVALIDATE_AGID\n");
setup_report_key(&cgc, ai->lsa.agid, 0x3f);
if ((ret = cdo->generic_packet(cdi, &cgc)))
- goto err;
+ return ret;
break;
/* Get region settings */
case DVD_LU_SEND_RPC_STATE:
cdinfo(CD_DVD, "entering DVD_LU_SEND_RPC_STATE\n");
setup_report_key(&cgc, 0, 8);
+ memset(&rpc_state, 0, sizeof(rpc_state_t));
+ cgc.buffer = (char *) &rpc_state;
if ((ret = cdo->generic_packet(cdi, &cgc)))
- goto err;
+ return ret;
- rpc_state = (rpc_state_t *)buf;
- ai->lrpcs.type = rpc_state->type_code;
- ai->lrpcs.vra = rpc_state->vra;
- ai->lrpcs.ucca = rpc_state->ucca;
- ai->lrpcs.region_mask = rpc_state->region_mask;
- ai->lrpcs.rpc_scheme = rpc_state->rpc_scheme;
+ ai->lrpcs.type = rpc_state.type_code;
+ ai->lrpcs.vra = rpc_state.vra;
+ ai->lrpcs.ucca = rpc_state.ucca;
+ ai->lrpcs.region_mask = rpc_state.region_mask;
+ ai->lrpcs.rpc_scheme = rpc_state.rpc_scheme;
break;
/* Set region settings */
@@ -1764,23 +1707,20 @@
buf[4] = ai->hrpcs.pdrc;
if ((ret = cdo->generic_packet(cdi, &cgc)))
- goto err;
+ return ret;
break;
default:
cdinfo(CD_WARNING, "Invalid DVD key ioctl (%d)\n", ai->type);
- ret = -ENOTTY;
- goto err;
+ return -ENOTTY;
}
- ret = 0;
-err:
- kfree(buf);
- return ret;
+
+ return 0;
}
static int dvd_read_physical(struct cdrom_device_info *cdi, dvd_struct *s)
{
- unsigned char *buf, *base;
+ unsigned char buf[21], *base;
struct dvd_layer *layer;
struct packet_command cgc;
struct cdrom_device_ops *cdo = cdi->ops;
@@ -1789,11 +1729,7 @@
if (layer_num >= DVD_LAYERS)
return -EINVAL;
- buf = kmalloc(21, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- init_cdrom_command(&cgc, buf, 21, CGC_DATA_READ);
+ init_cdrom_command(&cgc, buf, sizeof(buf), CGC_DATA_READ);
cgc.cmd[0] = GPCMD_READ_DVD_STRUCTURE;
cgc.cmd[6] = layer_num;
cgc.cmd[7] = s->type;
@@ -1805,7 +1741,7 @@
cgc.quiet = 1;
if ((ret = cdo->generic_packet(cdi, &cgc)))
- goto err;
+ return ret;
base = &buf[4];
layer = &s->physical.layer[layer_num];
@@ -1829,24 +1765,17 @@
layer->end_sector_l0 = base[13] << 16 | base[14] << 8 | base[15];
layer->bca = base[16] >> 7;
- ret = 0;
-err:
- kfree(buf);
- return ret;
+ return 0;
}
static int dvd_read_copyright(struct cdrom_device_info *cdi, dvd_struct *s)
{
int ret;
- u_char *buf;
+ u_char buf[8];
struct packet_command cgc;
struct cdrom_device_ops *cdo = cdi->ops;
- buf = kmalloc(8, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- init_cdrom_command(&cgc, buf, 8, CGC_DATA_READ);
+ init_cdrom_command(&cgc, buf, sizeof(buf), CGC_DATA_READ);
cgc.cmd[0] = GPCMD_READ_DVD_STRUCTURE;
cgc.cmd[6] = s->copyright.layer_num;
cgc.cmd[7] = s->type;
@@ -1854,15 +1783,12 @@
cgc.cmd[9] = cgc.buflen & 0xff;
if ((ret = cdo->generic_packet(cdi, &cgc)))
- goto err;
+ return ret;
s->copyright.cpst = buf[4];
s->copyright.rmi = buf[5];
- ret = 0;
-err:
- kfree(buf);
- return ret;
+ return 0;
}
static int dvd_read_disckey(struct cdrom_device_info *cdi, dvd_struct *s)
@@ -1894,33 +1820,26 @@
static int dvd_read_bca(struct cdrom_device_info *cdi, dvd_struct *s)
{
int ret;
- u_char *buf;
+ u_char buf[4 + 188];
struct packet_command cgc;
struct cdrom_device_ops *cdo = cdi->ops;
- buf = kmalloc(4 + 188, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- init_cdrom_command(&cgc, buf, 4 + 188, CGC_DATA_READ);
+ init_cdrom_command(&cgc, buf, sizeof(buf), CGC_DATA_READ);
cgc.cmd[0] = GPCMD_READ_DVD_STRUCTURE;
cgc.cmd[7] = s->type;
cgc.cmd[9] = cgc.buflen & 0xff;
if ((ret = cdo->generic_packet(cdi, &cgc)))
- goto err;
+ return ret;
s->bca.len = buf[0] << 8 | buf[1];
if (s->bca.len < 12 || s->bca.len > 188) {
cdinfo(CD_WARNING, "Received invalid BCA length (%d)\n", s->bca.len);
- ret = -EIO;
- goto err;
+ return -EIO;
}
memcpy(s->bca.value, &buf[4], s->bca.len);
- ret = 0;
-err:
- kfree(buf);
- return ret;
+
+ return 0;
}
static int dvd_read_manufact(struct cdrom_device_info *cdi, dvd_struct *s)
@@ -2020,13 +1939,9 @@
{
struct cdrom_device_ops *cdo = cdi->ops;
struct packet_command cgc;
- char *buffer;
+ char buffer[32];
int ret;
- buffer = kmalloc(32, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
init_cdrom_command(&cgc, buffer, 16, CGC_DATA_READ);
cgc.cmd[0] = GPCMD_READ_SUBCHANNEL;
cgc.cmd[1] = 2; /* MSF addressing */
@@ -2035,7 +1950,7 @@
cgc.cmd[8] = 16;
if ((ret = cdo->generic_packet(cdi, &cgc)))
- goto err;
+ return ret;
subchnl->cdsc_audiostatus = cgc.buffer[1];
subchnl->cdsc_format = CDROM_MSF;
@@ -2050,10 +1965,7 @@
subchnl->cdsc_absaddr.msf.second = cgc.buffer[10];
subchnl->cdsc_absaddr.msf.frame = cgc.buffer[11];
- ret = 0;
-err:
- kfree(buffer);
- return ret;
+ return 0;
}
/*
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 595a925..2d854bb 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -118,8 +118,8 @@
order to become a dial-in server. If you have a card like that, say
Y here and read <file:Documentation/computone.txt>.
- To compile this driver as modules, choose M here: the
- modules will be called ip2 and ip2main.
+ To compile this driver as module, choose M here: the
+ module will be called ip2.
config ROCKETPORT
tristate "Comtrol RocketPort support"
@@ -749,7 +749,7 @@
if RTC_LIB=n
config RTC
- tristate "Enhanced Real Time Clock Support"
+ tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)"
depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \
&& !ARM && !SUPERH && !S390 && !AVR32
---help---
@@ -1036,9 +1036,9 @@
non-periodic and/or periodic.
config HPET_RTC_IRQ
- bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC
- default n
- depends on HPET
+ bool
+ default HPET_EMULATE_RTC
+ depends on RTC && HPET
help
If you say Y here, you will disable RTC_IRQ in drivers/char/rtc.c. It
is assumed the platform called hpet_alloc with the RTC IRQ values for
diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h
index 99e6a40..81e14be 100644
--- a/drivers/char/agp/agp.h
+++ b/drivers/char/agp/agp.h
@@ -99,8 +99,8 @@
const void *aperture_sizes;
int num_aperture_sizes;
enum aper_size_type size_type;
- int cant_use_aperture;
- int needs_scratch_page;
+ bool cant_use_aperture;
+ bool needs_scratch_page;
const struct gatt_mask *masks;
int (*fetch_size)(void);
int (*configure)(void);
@@ -278,7 +278,7 @@
void agp_free_key(int key);
int agp_num_entries(void);
u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 mode, u32 command);
-void agp_device_command(u32 command, int agp_v3);
+void agp_device_command(u32 command, bool agp_v3);
int agp_3_5_enable(struct agp_bridge_data *bridge);
void global_cache_flush(void);
void get_agp_version(struct agp_bridge_data *bridge);
diff --git a/drivers/char/agp/alpha-agp.c b/drivers/char/agp/alpha-agp.c
index e77c178..5da89f6 100644
--- a/drivers/char/agp/alpha-agp.c
+++ b/drivers/char/agp/alpha-agp.c
@@ -80,7 +80,7 @@
agp->mode.bits.enable = 1;
agp->ops->configure(agp);
- agp_device_command(agp->mode.lw, 0);
+ agp_device_command(agp->mode.lw, false);
}
static int alpha_core_agp_insert_memory(struct agp_memory *mem, off_t pg_start,
@@ -126,7 +126,7 @@
.aperture_sizes = alpha_core_agp_sizes,
.num_aperture_sizes = 1,
.size_type = FIXED_APER_SIZE,
- .cant_use_aperture = 1,
+ .cant_use_aperture = true,
.masks = NULL,
.fetch_size = alpha_core_agp_fetch_size,
diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c
index 96bdb92..39a0718 100644
--- a/drivers/char/agp/amd-k7-agp.c
+++ b/drivers/char/agp/amd-k7-agp.c
@@ -314,9 +314,9 @@
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index d8200ac..13665db 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -90,9 +90,9 @@
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c
index 55c97f6..3a4566c 100644
--- a/drivers/char/agp/ati-agp.c
+++ b/drivers/char/agp/ati-agp.c
@@ -287,10 +287,10 @@
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
/*CACHE_FLUSH(); */
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
@@ -458,6 +458,10 @@
.chipset_name = "IGP9100/M",
},
{
+ .device_id = PCI_DEVICE_ID_ATI_RS350_133,
+ .chipset_name = "IGP9000/M",
+ },
+ {
.device_id = PCI_DEVICE_ID_ATI_RS350_200,
.chipset_name = "IGP9100/M",
},
diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c
index b1bdd01..1ec8710 100644
--- a/drivers/char/agp/backend.c
+++ b/drivers/char/agp/backend.c
@@ -188,10 +188,10 @@
err_out:
if (bridge->driver->needs_scratch_page) {
- bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real),
- AGP_PAGE_DESTROY_UNMAP);
- bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real),
- AGP_PAGE_DESTROY_FREE);
+ void *va = gart_to_virt(bridge->scratch_page_real);
+
+ bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP);
+ bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE);
}
if (got_gatt)
bridge->driver->free_gatt_table(bridge);
@@ -215,10 +215,10 @@
if (bridge->driver->agp_destroy_page &&
bridge->driver->needs_scratch_page) {
- bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real),
- AGP_PAGE_DESTROY_UNMAP);
- bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real),
- AGP_PAGE_DESTROY_FREE);
+ void *va = gart_to_virt(bridge->scratch_page_real);
+
+ bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP);
+ bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE);
}
}
diff --git a/drivers/char/agp/compat_ioctl.c b/drivers/char/agp/compat_ioctl.c
index 3927579..58c57cb 100644
--- a/drivers/char/agp/compat_ioctl.c
+++ b/drivers/char/agp/compat_ioctl.c
@@ -214,7 +214,7 @@
ret_val = -EINVAL;
goto ioctl_out;
}
- if ((agp_fe.backend_acquired != TRUE) &&
+ if ((agp_fe.backend_acquired != true) &&
(cmd != AGPIOC_ACQUIRE32)) {
ret_val = -EBUSY;
goto ioctl_out;
diff --git a/drivers/char/agp/efficeon-agp.c b/drivers/char/agp/efficeon-agp.c
index cac0009..8ca6f26 100644
--- a/drivers/char/agp/efficeon-agp.c
+++ b/drivers/char/agp/efficeon-agp.c
@@ -249,9 +249,9 @@
if (type != 0 || mem->type != 0)
return -EINVAL;
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
last_page = NULL;
@@ -329,7 +329,7 @@
.free_gatt_table = efficeon_free_gatt_table,
.insert_memory = efficeon_insert_memory,
.remove_memory = efficeon_remove_memory,
- .cant_use_aperture = 0, // 1 might be faster?
+ .cant_use_aperture = false, // true might be faster?
// Generic
.alloc_by_type = agp_generic_alloc_by_type,
diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c
index 857b262..e6cb1ab 100644
--- a/drivers/char/agp/frontend.c
+++ b/drivers/char/agp/frontend.c
@@ -395,7 +395,7 @@
if (agp_fe.current_controller == controller) {
agp_fe.current_controller = NULL;
- agp_fe.backend_acquired = FALSE;
+ agp_fe.backend_acquired = false;
agp_backend_release(agp_bridge);
}
kfree(controller);
@@ -443,7 +443,7 @@
}
agp_fe.current_controller = NULL;
- agp_fe.used_by_controller = FALSE;
+ agp_fe.used_by_controller = false;
agp_backend_release(agp_bridge);
}
@@ -573,7 +573,7 @@
mutex_lock(&(agp_fe.agp_mutex));
- if (agp_fe.backend_acquired != TRUE)
+ if (agp_fe.backend_acquired != true)
goto out_eperm;
if (!(test_bit(AGP_FF_IS_VALID, &priv->access_flags)))
@@ -768,7 +768,7 @@
atomic_inc(&agp_bridge->agp_in_use);
- agp_fe.backend_acquired = TRUE;
+ agp_fe.backend_acquired = true;
controller = agp_find_controller_by_pid(priv->my_pid);
@@ -778,7 +778,7 @@
controller = agp_create_controller(priv->my_pid);
if (controller == NULL) {
- agp_fe.backend_acquired = FALSE;
+ agp_fe.backend_acquired = false;
agp_backend_release(agp_bridge);
return -ENOMEM;
}
@@ -981,7 +981,7 @@
ret_val = -EINVAL;
goto ioctl_out;
}
- if ((agp_fe.backend_acquired != TRUE) &&
+ if ((agp_fe.backend_acquired != true) &&
(cmd != AGPIOC_ACQUIRE)) {
ret_val = -EBUSY;
goto ioctl_out;
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index 7fc0c99..564daaa 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -96,13 +96,13 @@
void agp_alloc_page_array(size_t size, struct agp_memory *mem)
{
mem->memory = NULL;
- mem->vmalloc_flag = 0;
+ mem->vmalloc_flag = false;
if (size <= 2*PAGE_SIZE)
mem->memory = kmalloc(size, GFP_KERNEL | __GFP_NORETRY);
if (mem->memory == NULL) {
mem->memory = vmalloc(size);
- mem->vmalloc_flag = 1;
+ mem->vmalloc_flag = true;
}
}
EXPORT_SYMBOL(agp_alloc_page_array);
@@ -188,7 +188,7 @@
if (curr == NULL)
return;
- if (curr->is_bound == TRUE)
+ if (curr->is_bound)
agp_unbind_memory(curr);
if (curr->type >= AGP_USER_TYPES) {
@@ -202,10 +202,13 @@
}
if (curr->page_count != 0) {
for (i = 0; i < curr->page_count; i++) {
- curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_UNMAP);
+ curr->memory[i] = (unsigned long)gart_to_virt(curr->memory[i]);
+ curr->bridge->driver->agp_destroy_page((void *)curr->memory[i],
+ AGP_PAGE_DESTROY_UNMAP);
}
for (i = 0; i < curr->page_count; i++) {
- curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_FREE);
+ curr->bridge->driver->agp_destroy_page((void *)curr->memory[i],
+ AGP_PAGE_DESTROY_FREE);
}
}
agp_free_key(curr->key);
@@ -411,20 +414,20 @@
if (curr == NULL)
return -EINVAL;
- if (curr->is_bound == TRUE) {
+ if (curr->is_bound) {
printk(KERN_INFO PFX "memory %p is already bound!\n", curr);
return -EINVAL;
}
- if (curr->is_flushed == FALSE) {
+ if (!curr->is_flushed) {
curr->bridge->driver->cache_flush();
- curr->is_flushed = TRUE;
+ curr->is_flushed = true;
}
ret_val = curr->bridge->driver->insert_memory(curr, pg_start, curr->type);
if (ret_val != 0)
return ret_val;
- curr->is_bound = TRUE;
+ curr->is_bound = true;
curr->pg_start = pg_start;
return 0;
}
@@ -446,7 +449,7 @@
if (curr == NULL)
return -EINVAL;
- if (curr->is_bound != TRUE) {
+ if (!curr->is_bound) {
printk(KERN_INFO PFX "memory %p was not bound!\n", curr);
return -EINVAL;
}
@@ -456,7 +459,7 @@
if (ret_val != 0)
return ret_val;
- curr->is_bound = FALSE;
+ curr->is_bound = false;
curr->pg_start = 0;
return 0;
}
@@ -754,7 +757,7 @@
EXPORT_SYMBOL(agp_collect_device_status);
-void agp_device_command(u32 bridge_agpstat, int agp_v3)
+void agp_device_command(u32 bridge_agpstat, bool agp_v3)
{
struct pci_dev *device = NULL;
int mode;
@@ -818,7 +821,7 @@
/* If we have 3.5, we can do the isoch stuff. */
if (bridge->minor_version >= 5)
agp_3_5_enable(bridge);
- agp_device_command(bridge_agpstat, TRUE);
+ agp_device_command(bridge_agpstat, true);
return;
} else {
/* Disable calibration cycle in RX91<1> when not in AGP3.0 mode of operation.*/
@@ -835,7 +838,7 @@
}
/* AGP v<3 */
- agp_device_command(bridge_agpstat, FALSE);
+ agp_device_command(bridge_agpstat, false);
}
EXPORT_SYMBOL(agp_generic_enable);
@@ -1083,9 +1086,9 @@
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
bridge->driver->cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
diff --git a/drivers/char/agp/hp-agp.c b/drivers/char/agp/hp-agp.c
index cbb0444..80d7317 100644
--- a/drivers/char/agp/hp-agp.c
+++ b/drivers/char/agp/hp-agp.c
@@ -353,9 +353,9 @@
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = io_pg_start; i < mem->page_count; i++) {
@@ -437,7 +437,7 @@
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
+ .cant_use_aperture = true,
};
static int __init
diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c
index 76f581c..e587eeb 100644
--- a/drivers/char/agp/i460-agp.c
+++ b/drivers/char/agp/i460-agp.c
@@ -580,7 +580,7 @@
.alloc_by_type = agp_generic_alloc_by_type,
.free_by_type = agp_generic_free_by_type,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
+ .cant_use_aperture = true,
};
static int __devinit agp_intel_i460_probe(struct pci_dev *pdev,
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index eeea50a..df70264 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -34,6 +34,12 @@
#define PCI_DEVICE_ID_INTEL_Q33_IG 0x29D2
#define PCI_DEVICE_ID_INTEL_IGD_HB 0x2A40
#define PCI_DEVICE_ID_INTEL_IGD_IG 0x2A42
+#define PCI_DEVICE_ID_INTEL_IGD_E_HB 0x2E00
+#define PCI_DEVICE_ID_INTEL_IGD_E_IG 0x2E02
+#define PCI_DEVICE_ID_INTEL_Q45_HB 0x2E10
+#define PCI_DEVICE_ID_INTEL_Q45_IG 0x2E12
+#define PCI_DEVICE_ID_INTEL_G45_HB 0x2E20
+#define PCI_DEVICE_ID_INTEL_G45_IG 0x2E22
/* cover 915 and 945 variants */
#define IS_I915 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || \
@@ -55,6 +61,10 @@
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q35_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q33_HB)
+#define IS_G4X (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_E_HB || \
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q45_HB || \
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G45_HB)
+
extern int agp_memory_reserved;
@@ -80,8 +90,13 @@
#define I915_PTEADDR 0x1C
#define I915_GMCH_GMS_STOLEN_48M (0x6 << 4)
#define I915_GMCH_GMS_STOLEN_64M (0x7 << 4)
-#define G33_GMCH_GMS_STOLEN_128M (0x8 << 4)
-#define G33_GMCH_GMS_STOLEN_256M (0x9 << 4)
+#define G33_GMCH_GMS_STOLEN_128M (0x8 << 4)
+#define G33_GMCH_GMS_STOLEN_256M (0x9 << 4)
+#define INTEL_GMCH_GMS_STOLEN_96M (0xa << 4)
+#define INTEL_GMCH_GMS_STOLEN_160M (0xb << 4)
+#define INTEL_GMCH_GMS_STOLEN_224M (0xc << 4)
+#define INTEL_GMCH_GMS_STOLEN_352M (0xd << 4)
+
#define I915_IFPADDR 0x60
/* Intel 965G registers */
@@ -325,7 +340,7 @@
out:
ret = 0;
out_err:
- mem->is_flushed = 1;
+ mem->is_flushed = true;
return ret;
}
@@ -418,9 +433,11 @@
if (curr->page_count == 4)
i8xx_destroy_pages(gart_to_virt(curr->memory[0]));
else {
- agp_bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[0]),
+ void *va = gart_to_virt(curr->memory[0]);
+
+ agp_bridge->driver->agp_destroy_page(va,
AGP_PAGE_DESTROY_UNMAP);
- agp_bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[0]),
+ agp_bridge->driver->agp_destroy_page(va,
AGP_PAGE_DESTROY_FREE);
}
agp_free_page_array(curr);
@@ -504,6 +521,10 @@
size = 512;
}
size += 4;
+ } else if (IS_G4X) {
+ /* On 4 series hardware, GTT stolen is separate from graphics
+ * stolen, ignore it in stolen gtt entries counting */
+ size = 0;
} else {
/* On previous hardware, the GTT size was just what was
* required to map the aperture.
@@ -552,30 +573,54 @@
break;
case I915_GMCH_GMS_STOLEN_48M:
/* Check it's really I915G */
- if (IS_I915 || IS_I965 || IS_G33)
+ if (IS_I915 || IS_I965 || IS_G33 || IS_G4X)
gtt_entries = MB(48) - KB(size);
else
gtt_entries = 0;
break;
case I915_GMCH_GMS_STOLEN_64M:
/* Check it's really I915G */
- if (IS_I915 || IS_I965 || IS_G33)
+ if (IS_I915 || IS_I965 || IS_G33 || IS_G4X)
gtt_entries = MB(64) - KB(size);
else
gtt_entries = 0;
break;
case G33_GMCH_GMS_STOLEN_128M:
- if (IS_G33)
+ if (IS_G33 || IS_I965 || IS_G4X)
gtt_entries = MB(128) - KB(size);
else
gtt_entries = 0;
break;
case G33_GMCH_GMS_STOLEN_256M:
- if (IS_G33)
+ if (IS_G33 || IS_I965 || IS_G4X)
gtt_entries = MB(256) - KB(size);
else
gtt_entries = 0;
break;
+ case INTEL_GMCH_GMS_STOLEN_96M:
+ if (IS_I965 || IS_G4X)
+ gtt_entries = MB(96) - KB(size);
+ else
+ gtt_entries = 0;
+ break;
+ case INTEL_GMCH_GMS_STOLEN_160M:
+ if (IS_I965 || IS_G4X)
+ gtt_entries = MB(160) - KB(size);
+ else
+ gtt_entries = 0;
+ break;
+ case INTEL_GMCH_GMS_STOLEN_224M:
+ if (IS_I965 || IS_G4X)
+ gtt_entries = MB(224) - KB(size);
+ else
+ gtt_entries = 0;
+ break;
+ case INTEL_GMCH_GMS_STOLEN_352M:
+ if (IS_I965 || IS_G4X)
+ gtt_entries = MB(352) - KB(size);
+ else
+ gtt_entries = 0;
+ break;
default:
gtt_entries = 0;
break;
@@ -793,7 +838,7 @@
out:
ret = 0;
out_err:
- mem->is_flushed = 1;
+ mem->is_flushed = true;
return ret;
}
@@ -903,7 +948,7 @@
intel_private.ifp_resource.flags = IORESOURCE_MEM;
/* Setup chipset flush for 915 */
- if (IS_I965 || IS_G33) {
+ if (IS_I965 || IS_G33 || IS_G4X) {
intel_i965_g33_setup_chipset_flush();
} else {
intel_i915_setup_chipset_flush();
@@ -1020,7 +1065,7 @@
out:
ret = 0;
out_err:
- mem->is_flushed = 1;
+ mem->is_flushed = true;
return ret;
}
@@ -1134,53 +1179,64 @@
return addr | bridge->driver->masks[type].mask;
}
+static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size)
+{
+ switch (agp_bridge->dev->device) {
+ case PCI_DEVICE_ID_INTEL_IGD_HB:
+ case PCI_DEVICE_ID_INTEL_IGD_E_HB:
+ case PCI_DEVICE_ID_INTEL_Q45_HB:
+ case PCI_DEVICE_ID_INTEL_G45_HB:
+ *gtt_offset = *gtt_size = MB(2);
+ break;
+ default:
+ *gtt_offset = *gtt_size = KB(512);
+ }
+}
+
/* The intel i965 automatically initializes the agp aperture during POST.
* Use the memory already set aside for in the GTT.
*/
static int intel_i965_create_gatt_table(struct agp_bridge_data *bridge)
{
- int page_order;
- struct aper_size_info_fixed *size;
- int num_entries;
- u32 temp;
- int gtt_offset, gtt_size;
+ int page_order;
+ struct aper_size_info_fixed *size;
+ int num_entries;
+ u32 temp;
+ int gtt_offset, gtt_size;
- size = agp_bridge->current_size;
- page_order = size->page_order;
- num_entries = size->num_entries;
- agp_bridge->gatt_table_real = NULL;
+ size = agp_bridge->current_size;
+ page_order = size->page_order;
+ num_entries = size->num_entries;
+ agp_bridge->gatt_table_real = NULL;
- pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp);
+ pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp);
- temp &= 0xfff00000;
+ temp &= 0xfff00000;
- if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_HB)
- gtt_offset = gtt_size = MB(2);
- else
- gtt_offset = gtt_size = KB(512);
+ intel_i965_get_gtt_range(>t_offset, >t_size);
- intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size);
+ intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size);
- if (!intel_private.gtt)
- return -ENOMEM;
+ if (!intel_private.gtt)
+ return -ENOMEM;
- intel_private.registers = ioremap(temp, 128 * 4096);
- if (!intel_private.registers) {
+ intel_private.registers = ioremap(temp, 128 * 4096);
+ if (!intel_private.registers) {
iounmap(intel_private.gtt);
return -ENOMEM;
}
- temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000;
- global_cache_flush(); /* FIXME: ? */
+ temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000;
+ global_cache_flush(); /* FIXME: ? */
- /* we have to call this as early as possible after the MMIO base address is known */
- intel_i830_init_gtt_entries();
+ /* we have to call this as early as possible after the MMIO base address is known */
+ intel_i830_init_gtt_entries();
- agp_bridge->gatt_table = NULL;
+ agp_bridge->gatt_table = NULL;
- agp_bridge->gatt_bus_addr = temp;
+ agp_bridge->gatt_bus_addr = temp;
- return 0;
+ return 0;
}
@@ -1656,7 +1712,7 @@
.aperture_sizes = intel_i810_sizes,
.size_type = FIXED_APER_SIZE,
.num_aperture_sizes = 2,
- .needs_scratch_page = TRUE,
+ .needs_scratch_page = true,
.configure = intel_i810_configure,
.fetch_size = intel_i810_fetch_size,
.cleanup = intel_i810_cleanup,
@@ -1697,7 +1753,7 @@
.free_by_type = agp_generic_free_by_type,
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
- .agp_type_to_mask_type = agp_generic_type_to_mask_type,
+ .agp_type_to_mask_type = agp_generic_type_to_mask_type,
};
static const struct agp_bridge_driver intel_830_driver = {
@@ -1705,7 +1761,7 @@
.aperture_sizes = intel_i830_sizes,
.size_type = FIXED_APER_SIZE,
.num_aperture_sizes = 4,
- .needs_scratch_page = TRUE,
+ .needs_scratch_page = true,
.configure = intel_i830_configure,
.fetch_size = intel_i830_fetch_size,
.cleanup = intel_i830_cleanup,
@@ -1876,7 +1932,7 @@
.aperture_sizes = intel_i830_sizes,
.size_type = FIXED_APER_SIZE,
.num_aperture_sizes = 4,
- .needs_scratch_page = TRUE,
+ .needs_scratch_page = true,
.configure = intel_i915_configure,
.fetch_size = intel_i9xx_fetch_size,
.cleanup = intel_i915_cleanup,
@@ -1898,28 +1954,28 @@
};
static const struct agp_bridge_driver intel_i965_driver = {
- .owner = THIS_MODULE,
- .aperture_sizes = intel_i830_sizes,
- .size_type = FIXED_APER_SIZE,
- .num_aperture_sizes = 4,
- .needs_scratch_page = TRUE,
- .configure = intel_i915_configure,
- .fetch_size = intel_i9xx_fetch_size,
- .cleanup = intel_i915_cleanup,
- .tlb_flush = intel_i810_tlbflush,
- .mask_memory = intel_i965_mask_memory,
- .masks = intel_i810_masks,
- .agp_enable = intel_i810_agp_enable,
- .cache_flush = global_cache_flush,
- .create_gatt_table = intel_i965_create_gatt_table,
- .free_gatt_table = intel_i830_free_gatt_table,
- .insert_memory = intel_i915_insert_entries,
- .remove_memory = intel_i915_remove_entries,
- .alloc_by_type = intel_i830_alloc_by_type,
- .free_by_type = intel_i810_free_by_type,
- .agp_alloc_page = agp_generic_alloc_page,
- .agp_destroy_page = agp_generic_destroy_page,
- .agp_type_to_mask_type = intel_i830_type_to_mask_type,
+ .owner = THIS_MODULE,
+ .aperture_sizes = intel_i830_sizes,
+ .size_type = FIXED_APER_SIZE,
+ .num_aperture_sizes = 4,
+ .needs_scratch_page = true,
+ .configure = intel_i915_configure,
+ .fetch_size = intel_i9xx_fetch_size,
+ .cleanup = intel_i915_cleanup,
+ .tlb_flush = intel_i810_tlbflush,
+ .mask_memory = intel_i965_mask_memory,
+ .masks = intel_i810_masks,
+ .agp_enable = intel_i810_agp_enable,
+ .cache_flush = global_cache_flush,
+ .create_gatt_table = intel_i965_create_gatt_table,
+ .free_gatt_table = intel_i830_free_gatt_table,
+ .insert_memory = intel_i915_insert_entries,
+ .remove_memory = intel_i915_remove_entries,
+ .alloc_by_type = intel_i830_alloc_by_type,
+ .free_by_type = intel_i810_free_by_type,
+ .agp_alloc_page = agp_generic_alloc_page,
+ .agp_destroy_page = agp_generic_destroy_page,
+ .agp_type_to_mask_type = intel_i830_type_to_mask_type,
.chipset_flush = intel_i915_chipset_flush,
};
@@ -1948,28 +2004,28 @@
};
static const struct agp_bridge_driver intel_g33_driver = {
- .owner = THIS_MODULE,
- .aperture_sizes = intel_i830_sizes,
- .size_type = FIXED_APER_SIZE,
- .num_aperture_sizes = 4,
- .needs_scratch_page = TRUE,
- .configure = intel_i915_configure,
- .fetch_size = intel_i9xx_fetch_size,
- .cleanup = intel_i915_cleanup,
- .tlb_flush = intel_i810_tlbflush,
- .mask_memory = intel_i965_mask_memory,
- .masks = intel_i810_masks,
- .agp_enable = intel_i810_agp_enable,
- .cache_flush = global_cache_flush,
- .create_gatt_table = intel_i915_create_gatt_table,
- .free_gatt_table = intel_i830_free_gatt_table,
- .insert_memory = intel_i915_insert_entries,
- .remove_memory = intel_i915_remove_entries,
- .alloc_by_type = intel_i830_alloc_by_type,
- .free_by_type = intel_i810_free_by_type,
- .agp_alloc_page = agp_generic_alloc_page,
- .agp_destroy_page = agp_generic_destroy_page,
- .agp_type_to_mask_type = intel_i830_type_to_mask_type,
+ .owner = THIS_MODULE,
+ .aperture_sizes = intel_i830_sizes,
+ .size_type = FIXED_APER_SIZE,
+ .num_aperture_sizes = 4,
+ .needs_scratch_page = true,
+ .configure = intel_i915_configure,
+ .fetch_size = intel_i9xx_fetch_size,
+ .cleanup = intel_i915_cleanup,
+ .tlb_flush = intel_i810_tlbflush,
+ .mask_memory = intel_i965_mask_memory,
+ .masks = intel_i810_masks,
+ .agp_enable = intel_i810_agp_enable,
+ .cache_flush = global_cache_flush,
+ .create_gatt_table = intel_i915_create_gatt_table,
+ .free_gatt_table = intel_i830_free_gatt_table,
+ .insert_memory = intel_i915_insert_entries,
+ .remove_memory = intel_i915_remove_entries,
+ .alloc_by_type = intel_i830_alloc_by_type,
+ .free_by_type = intel_i810_free_by_type,
+ .agp_alloc_page = agp_generic_alloc_page,
+ .agp_destroy_page = agp_generic_destroy_page,
+ .agp_type_to_mask_type = intel_i830_type_to_mask_type,
.chipset_flush = intel_i915_chipset_flush,
};
@@ -2063,6 +2119,12 @@
NULL, &intel_g33_driver },
{ PCI_DEVICE_ID_INTEL_IGD_HB, PCI_DEVICE_ID_INTEL_IGD_IG, 0,
"Intel Integrated Graphics Device", NULL, &intel_i965_driver },
+ { PCI_DEVICE_ID_INTEL_IGD_E_HB, PCI_DEVICE_ID_INTEL_IGD_E_IG, 0,
+ "Intel Integrated Graphics Device", NULL, &intel_i965_driver },
+ { PCI_DEVICE_ID_INTEL_Q45_HB, PCI_DEVICE_ID_INTEL_Q45_IG, 0,
+ "Q45/Q43", NULL, &intel_i965_driver },
+ { PCI_DEVICE_ID_INTEL_G45_HB, PCI_DEVICE_ID_INTEL_G45_IG, 0,
+ "G45/G43", NULL, &intel_i965_driver },
{ 0, 0, 0, NULL, NULL, NULL }
};
@@ -2254,6 +2316,9 @@
ID(PCI_DEVICE_ID_INTEL_Q35_HB),
ID(PCI_DEVICE_ID_INTEL_Q33_HB),
ID(PCI_DEVICE_ID_INTEL_IGD_HB),
+ ID(PCI_DEVICE_ID_INTEL_IGD_E_HB),
+ ID(PCI_DEVICE_ID_INTEL_Q45_HB),
+ ID(PCI_DEVICE_ID_INTEL_G45_HB),
{ }
};
diff --git a/drivers/char/agp/nvidia-agp.c b/drivers/char/agp/nvidia-agp.c
index 225ed2a..eaceb61 100644
--- a/drivers/char/agp/nvidia-agp.c
+++ b/drivers/char/agp/nvidia-agp.c
@@ -214,9 +214,9 @@
return -EBUSY;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
writel(agp_bridge->driver->mask_memory(agp_bridge,
diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c
index 2939e35..8c42dcc 100644
--- a/drivers/char/agp/parisc-agp.c
+++ b/drivers/char/agp/parisc-agp.c
@@ -141,9 +141,9 @@
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = io_pg_start; i < mem->page_count; i++) {
@@ -226,7 +226,7 @@
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
+ .cant_use_aperture = true,
};
static int __init
diff --git a/drivers/char/agp/sgi-agp.c b/drivers/char/agp/sgi-agp.c
index 98cf8ab..b972d83 100644
--- a/drivers/char/agp/sgi-agp.c
+++ b/drivers/char/agp/sgi-agp.c
@@ -182,9 +182,9 @@
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
bridge->driver->cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
@@ -264,8 +264,8 @@
.agp_alloc_page = sgi_tioca_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
- .needs_scratch_page = 0,
+ .cant_use_aperture = true,
+ .needs_scratch_page = false,
.num_aperture_sizes = 1,
};
diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c
index e08934e..0e054c1 100644
--- a/drivers/char/agp/sworks-agp.c
+++ b/drivers/char/agp/sworks-agp.c
@@ -339,9 +339,9 @@
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
@@ -412,7 +412,7 @@
bridge->capndx + PCI_AGP_COMMAND,
command);
- agp_device_command(command, 0);
+ agp_device_command(command, false);
}
static const struct agp_bridge_driver sworks_driver = {
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index 42c0a60..d2fa3cf 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -281,10 +281,10 @@
if (uninorth_rev >= 0x30) {
/* This is an AGP V3 */
- agp_device_command(command, (status & AGPSTAT_MODE_3_0));
+ agp_device_command(command, (status & AGPSTAT_MODE_3_0) != 0);
} else {
/* AGP V2 */
- agp_device_command(command, 0);
+ agp_device_command(command, false);
}
uninorth_tlbflush(NULL);
@@ -511,7 +511,7 @@
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
+ .cant_use_aperture = true,
};
const struct agp_bridge_driver u3_agp_driver = {
@@ -536,8 +536,8 @@
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
- .needs_scratch_page = 1,
+ .cant_use_aperture = true,
+ .needs_scratch_page = true,
};
static struct agp_device_ids uninorth_agp_device_ids[] __devinitdata = {
diff --git a/drivers/char/agp/via-agp.c b/drivers/char/agp/via-agp.c
index 0ecc54d..7b36476 100644
--- a/drivers/char/agp/via-agp.c
+++ b/drivers/char/agp/via-agp.c
@@ -389,11 +389,20 @@
.device_id = PCI_DEVICE_ID_VIA_VT3324,
.chipset_name = "CX700",
},
- /* VT3336 */
+ /* VT3336 - this is a chipset for AMD Athlon/K8 CPU. Due to K8's unique
+ * architecture, the AGP resource and behavior are different from
+ * the traditional AGP which resides only in chipset. AGP is used
+ * by 3D driver which wasn't available for the VT3336 and VT3364
+ * generation until now. Unfortunately, by testing, VT3364 works
+ * but VT3336 doesn't. - explaination from via, just leave this as
+ * as a placeholder to avoid future patches adding it back in.
+ */
+#if 0
{
.device_id = PCI_DEVICE_ID_VIA_VT3336,
.chipset_name = "VT3336",
},
+#endif
/* P4M890 */
{
.device_id = PCI_DEVICE_ID_VIA_P4M890,
@@ -546,8 +555,8 @@
ID(PCI_DEVICE_ID_VIA_3296_0),
ID(PCI_DEVICE_ID_VIA_P4M800CE),
ID(PCI_DEVICE_ID_VIA_VT3324),
- ID(PCI_DEVICE_ID_VIA_VT3336),
ID(PCI_DEVICE_ID_VIA_P4M890),
+ ID(PCI_DEVICE_ID_VIA_VT3364),
{ }
};
diff --git a/drivers/char/drm/ati_pcigart.c b/drivers/char/drm/ati_pcigart.c
index b710426..c533d0c 100644
--- a/drivers/char/drm/ati_pcigart.c
+++ b/drivers/char/drm/ati_pcigart.c
@@ -76,7 +76,7 @@
for (i = 0; i < pages; i++) {
if (!entry->busaddr[i])
break;
- pci_unmap_single(dev->pdev, entry->busaddr[i],
+ pci_unmap_page(dev->pdev, entry->busaddr[i],
PAGE_SIZE, PCI_DMA_TODEVICE);
}
@@ -137,10 +137,8 @@
for (i = 0; i < pages; i++) {
/* we need to support large memory configurations */
- entry->busaddr[i] = pci_map_single(dev->pdev,
- page_address(entry->
- pagelist[i]),
- PAGE_SIZE, PCI_DMA_TODEVICE);
+ entry->busaddr[i] = pci_map_page(dev->pdev, entry->pagelist[i],
+ 0, PAGE_SIZE, PCI_DMA_TODEVICE);
if (entry->busaddr[i] == 0) {
DRM_ERROR("unable to map PCIGART pages!\n");
drm_ati_pcigart_cleanup(dev, gart_info);
diff --git a/drivers/char/drm/drm.h b/drivers/char/drm/drm.h
index 3a05c6d..38d3c6b 100644
--- a/drivers/char/drm/drm.h
+++ b/drivers/char/drm/drm.h
@@ -628,7 +628,7 @@
#define DRM_IOCTL_AGP_BIND DRM_IOW( 0x36, struct drm_agp_binding)
#define DRM_IOCTL_AGP_UNBIND DRM_IOW( 0x37, struct drm_agp_binding)
-#define DRM_IOCTL_SG_ALLOC DRM_IOW( 0x38, struct drm_scatter_gather)
+#define DRM_IOCTL_SG_ALLOC DRM_IOWR(0x38, struct drm_scatter_gather)
#define DRM_IOCTL_SG_FREE DRM_IOW( 0x39, struct drm_scatter_gather)
#define DRM_IOCTL_WAIT_VBLANK DRM_IOWR(0x3a, union drm_wait_vblank)
diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c
index fc54140..5641387 100644
--- a/drivers/char/drm/drm_drv.c
+++ b/drivers/char/drm/drm_drv.c
@@ -470,17 +470,18 @@
if ((nr >= DRM_COMMAND_BASE) && (nr < DRM_COMMAND_END) &&
(nr < DRM_COMMAND_BASE + dev->driver->num_ioctls))
ioctl = &dev->driver->ioctls[nr - DRM_COMMAND_BASE];
- else if ((nr >= DRM_COMMAND_END) || (nr < DRM_COMMAND_BASE))
+ else if ((nr >= DRM_COMMAND_END) || (nr < DRM_COMMAND_BASE)) {
ioctl = &drm_ioctls[nr];
- else
+ cmd = ioctl->cmd;
+ } else
goto err_i1;
+ /* Do not trust userspace, use our own definition */
func = ioctl->func;
/* is there a local override? */
if ((nr == DRM_IOCTL_NR(DRM_IOCTL_DMA)) && dev->driver->dma_ioctl)
func = dev->driver->dma_ioctl;
-
if (!func) {
DRM_DEBUG("no function\n");
retcode = -EINVAL;
diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h
index a6a499f..135bd19 100644
--- a/drivers/char/drm/drm_pciids.h
+++ b/drivers/char/drm/drm_pciids.h
@@ -103,20 +103,18 @@
{0x1002, 0x5653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP}, \
{0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
- {0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
{0x1002, 0x5960, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5961, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5962, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5964, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
- {0x1002, 0x5a41, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
{0x1002, 0x5b60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5b62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5b63, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
@@ -411,4 +409,7 @@
{0x8086, 0x2a02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x2a12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x2a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0, 0, 0}
diff --git a/drivers/char/drm/i915_drv.c b/drivers/char/drm/i915_drv.c
index e8f3d68..93aed1c 100644
--- a/drivers/char/drm/i915_drv.c
+++ b/drivers/char/drm/i915_drv.c
@@ -389,6 +389,7 @@
pci_restore_state(dev->pdev);
if (pci_enable_device(dev->pdev))
return -1;
+ pci_set_master(dev->pdev);
pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h
index 1b20f7c..d7326d9 100644
--- a/drivers/char/drm/i915_drv.h
+++ b/drivers/char/drm/i915_drv.h
@@ -1112,12 +1112,19 @@
(dev)->pci_device == 0x29A2 || \
(dev)->pci_device == 0x2A02 || \
(dev)->pci_device == 0x2A12 || \
- (dev)->pci_device == 0x2A42)
+ (dev)->pci_device == 0x2A42 || \
+ (dev)->pci_device == 0x2E02 || \
+ (dev)->pci_device == 0x2E12 || \
+ (dev)->pci_device == 0x2E22)
#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
#define IS_IGD_GM(dev) ((dev)->pci_device == 0x2A42)
+#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \
+ (dev)->pci_device == 0x2E12 || \
+ (dev)->pci_device == 0x2E22)
+
#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \
(dev)->pci_device == 0x29B2 || \
(dev)->pci_device == 0x29D2)
@@ -1128,7 +1135,7 @@
#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
IS_I945GM(dev) || IS_I965GM(dev) || IS_IGD_GM(dev))
-#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev))
+#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev) || IS_G4X(dev))
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
diff --git a/drivers/char/drm/i915_irq.c b/drivers/char/drm/i915_irq.c
index f7f16e7..df03611 100644
--- a/drivers/char/drm/i915_irq.c
+++ b/drivers/char/drm/i915_irq.c
@@ -62,11 +62,11 @@
u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24);
RING_LOCALS;
- if (sarea_priv->front_tiled) {
+ if (IS_I965G(dev) && sarea_priv->front_tiled) {
cmd |= XY_SRC_COPY_BLT_DST_TILED;
dst_pitch >>= 2;
}
- if (sarea_priv->back_tiled) {
+ if (IS_I965G(dev) && sarea_priv->back_tiled) {
cmd |= XY_SRC_COPY_BLT_SRC_TILED;
src_pitch >>= 2;
}
diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c
index f535812..702df45 100644
--- a/drivers/char/drm/r300_cmdbuf.c
+++ b/drivers/char/drm/r300_cmdbuf.c
@@ -189,18 +189,12 @@
ADD_RANGE(R300_RE_CULL_CNTL, 1);
ADD_RANGE(0x42C0, 2);
ADD_RANGE(R300_RS_CNTL_0, 2);
- ADD_RANGE(R300_RS_INTERP_0, 8);
- ADD_RANGE(R300_RS_ROUTE_0, 8);
- ADD_RANGE(0x43A4, 2);
+
+ ADD_RANGE(R300_SC_HYPERZ, 2);
ADD_RANGE(0x43E8, 1);
- ADD_RANGE(R300_PFS_CNTL_0, 3);
- ADD_RANGE(R300_PFS_NODE_0, 4);
- ADD_RANGE(R300_PFS_TEXI_0, 64);
+
ADD_RANGE(0x46A4, 5);
- ADD_RANGE(R300_PFS_INSTR0_0, 64);
- ADD_RANGE(R300_PFS_INSTR1_0, 64);
- ADD_RANGE(R300_PFS_INSTR2_0, 64);
- ADD_RANGE(R300_PFS_INSTR3_0, 64);
+
ADD_RANGE(R300_RE_FOG_STATE, 1);
ADD_RANGE(R300_FOG_COLOR_R, 3);
ADD_RANGE(R300_PP_ALPHA_TEST, 2);
@@ -215,14 +209,12 @@
ADD_RANGE(0x4E50, 9);
ADD_RANGE(0x4E88, 1);
ADD_RANGE(0x4EA0, 2);
- ADD_RANGE(R300_RB3D_ZSTENCIL_CNTL_0, 3);
- ADD_RANGE(R300_RB3D_ZSTENCIL_FORMAT, 4);
- ADD_RANGE_MARK(R300_RB3D_DEPTHOFFSET, 1, MARK_CHECK_OFFSET); /* check offset */
- ADD_RANGE(R300_RB3D_DEPTHPITCH, 1);
- ADD_RANGE(0x4F28, 1);
- ADD_RANGE(0x4F30, 2);
- ADD_RANGE(0x4F44, 1);
- ADD_RANGE(0x4F54, 1);
+ ADD_RANGE(R300_ZB_CNTL, 3);
+ ADD_RANGE(R300_ZB_FORMAT, 4);
+ ADD_RANGE_MARK(R300_ZB_DEPTHOFFSET, 1, MARK_CHECK_OFFSET); /* check offset */
+ ADD_RANGE(R300_ZB_DEPTHPITCH, 1);
+ ADD_RANGE(R300_ZB_DEPTHCLEARVALUE, 1);
+ ADD_RANGE(R300_ZB_ZMASK_OFFSET, 13);
ADD_RANGE(R300_TX_FILTER_0, 16);
ADD_RANGE(R300_TX_FILTER1_0, 16);
@@ -235,13 +227,32 @@
ADD_RANGE(R300_TX_BORDER_COLOR_0, 16);
/* Sporadic registers used as primitives are emitted */
- ADD_RANGE(R300_RB3D_ZCACHE_CTLSTAT, 1);
+ ADD_RANGE(R300_ZB_ZCACHE_CTLSTAT, 1);
ADD_RANGE(R300_RB3D_DSTCACHE_CTLSTAT, 1);
ADD_RANGE(R300_VAP_INPUT_ROUTE_0_0, 8);
ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8);
if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) {
- ADD_RANGE(0x4074, 16);
+ ADD_RANGE(R500_VAP_INDEX_OFFSET, 1);
+ ADD_RANGE(R500_US_CONFIG, 2);
+ ADD_RANGE(R500_US_CODE_ADDR, 3);
+ ADD_RANGE(R500_US_FC_CTRL, 1);
+ ADD_RANGE(R500_RS_IP_0, 16);
+ ADD_RANGE(R500_RS_INST_0, 16);
+ ADD_RANGE(R500_RB3D_COLOR_CLEAR_VALUE_AR, 2);
+ ADD_RANGE(R500_RB3D_CONSTANT_COLOR_AR, 2);
+ ADD_RANGE(R500_ZB_FIFO_SIZE, 2);
+ } else {
+ ADD_RANGE(R300_PFS_CNTL_0, 3);
+ ADD_RANGE(R300_PFS_NODE_0, 4);
+ ADD_RANGE(R300_PFS_TEXI_0, 64);
+ ADD_RANGE(R300_PFS_INSTR0_0, 64);
+ ADD_RANGE(R300_PFS_INSTR1_0, 64);
+ ADD_RANGE(R300_PFS_INSTR2_0, 64);
+ ADD_RANGE(R300_PFS_INSTR3_0, 64);
+ ADD_RANGE(R300_RS_INTERP_0, 8);
+ ADD_RANGE(R300_RS_ROUTE_0, 8);
+
}
}
@@ -707,8 +718,9 @@
BEGIN_RING(6);
OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
OUT_RING(R300_RB3D_DSTCACHE_UNKNOWN_0A);
- OUT_RING(CP_PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
- OUT_RING(R300_RB3D_ZCACHE_UNKNOWN_03);
+ OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0));
+ OUT_RING(R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE|
+ R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE);
OUT_RING(CP_PACKET3(RADEON_CP_NOP, 0));
OUT_RING(0x0);
ADVANCE_RING();
@@ -829,6 +841,54 @@
}
/**
+ * Uploads user-supplied vertex program instructions or parameters onto
+ * the graphics card.
+ * Called by r300_do_cp_cmdbuf.
+ */
+static inline int r300_emit_r500fp(drm_radeon_private_t *dev_priv,
+ drm_radeon_kcmd_buffer_t *cmdbuf,
+ drm_r300_cmd_header_t header)
+{
+ int sz;
+ int addr;
+ int type;
+ int clamp;
+ int stride;
+ RING_LOCALS;
+
+ sz = header.r500fp.count;
+ /* address is 9 bits 0 - 8, bit 1 of flags is part of address */
+ addr = ((header.r500fp.adrhi_flags & 1) << 8) | header.r500fp.adrlo;
+
+ type = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_TYPE);
+ clamp = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_CLAMP);
+
+ addr |= (type << 16);
+ addr |= (clamp << 17);
+
+ stride = type ? 4 : 6;
+
+ DRM_DEBUG("r500fp %d %d type: %d\n", sz, addr, type);
+ if (!sz)
+ return 0;
+ if (sz * stride * 4 > cmdbuf->bufsz)
+ return -EINVAL;
+
+ BEGIN_RING(3 + sz * stride);
+ OUT_RING_REG(R500_GA_US_VECTOR_INDEX, addr);
+ OUT_RING(CP_PACKET0_TABLE(R500_GA_US_VECTOR_DATA, sz * stride - 1));
+ OUT_RING_TABLE((int *)cmdbuf->buf, sz * stride);
+
+ ADVANCE_RING();
+
+ cmdbuf->buf += sz * stride * 4;
+ cmdbuf->bufsz -= sz * stride * 4;
+
+ return 0;
+}
+
+
+/**
* Parses and validates a user-supplied command buffer and emits appropriate
* commands on the DMA ring buffer.
* Called by the ioctl handler function radeon_cp_cmdbuf.
@@ -963,6 +1023,19 @@
}
break;
+ case R300_CMD_R500FP:
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) < CHIP_RV515) {
+ DRM_ERROR("Calling r500 command on r300 card\n");
+ ret = -EINVAL;
+ goto cleanup;
+ }
+ DRM_DEBUG("R300_CMD_R500FP\n");
+ ret = r300_emit_r500fp(dev_priv, cmdbuf, header);
+ if (ret) {
+ DRM_ERROR("r300_emit_r500fp failed\n");
+ goto cleanup;
+ }
+ break;
default:
DRM_ERROR("bad cmd_type %i at %p\n",
header.header.cmd_type,
diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h
index 8f664af..a6802f2 100644
--- a/drivers/char/drm/r300_reg.h
+++ b/drivers/char/drm/r300_reg.h
@@ -702,6 +702,27 @@
# define R300_RS_ROUTE_1_UNKNOWN11 (1 << 11)
/* END: Rasterization / Interpolators - many guesses */
+/* Hierarchical Z Enable */
+#define R300_SC_HYPERZ 0x43a4
+# define R300_SC_HYPERZ_DISABLE (0 << 0)
+# define R300_SC_HYPERZ_ENABLE (1 << 0)
+# define R300_SC_HYPERZ_MIN (0 << 1)
+# define R300_SC_HYPERZ_MAX (1 << 1)
+# define R300_SC_HYPERZ_ADJ_256 (0 << 2)
+# define R300_SC_HYPERZ_ADJ_128 (1 << 2)
+# define R300_SC_HYPERZ_ADJ_64 (2 << 2)
+# define R300_SC_HYPERZ_ADJ_32 (3 << 2)
+# define R300_SC_HYPERZ_ADJ_16 (4 << 2)
+# define R300_SC_HYPERZ_ADJ_8 (5 << 2)
+# define R300_SC_HYPERZ_ADJ_4 (6 << 2)
+# define R300_SC_HYPERZ_ADJ_2 (7 << 2)
+# define R300_SC_HYPERZ_HZ_Z0MIN_NO (0 << 5)
+# define R300_SC_HYPERZ_HZ_Z0MIN (1 << 5)
+# define R300_SC_HYPERZ_HZ_Z0MAX_NO (0 << 6)
+# define R300_SC_HYPERZ_HZ_Z0MAX (1 << 6)
+
+#define R300_SC_EDGERULE 0x43a8
+
/* BEGIN: Scissors and cliprects */
/* There are four clipping rectangles. Their corner coordinates are inclusive.
@@ -1346,7 +1367,7 @@
/* Guess by Vladimir.
* Set to 0A before 3D operations, set to 02 afterwards.
*/
-#define R300_RB3D_DSTCACHE_CTLSTAT 0x4E4C
+/*#define R300_RB3D_DSTCACHE_CTLSTAT 0x4E4C*/
# define R300_RB3D_DSTCACHE_UNKNOWN_02 0x00000002
# define R300_RB3D_DSTCACHE_UNKNOWN_0A 0x0000000A
@@ -1355,19 +1376,14 @@
* for this.
* Bit (1<<8) is the "test" bit. so plain write is 6 - vd
*/
-#define R300_RB3D_ZSTENCIL_CNTL_0 0x4F00
-# define R300_RB3D_Z_DISABLED_1 0x00000010
-# define R300_RB3D_Z_DISABLED_2 0x00000014
-# define R300_RB3D_Z_TEST 0x00000012
-# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016
-# define R300_RB3D_Z_WRITE_ONLY 0x00000006
+#define R300_ZB_CNTL 0x4F00
+# define R300_STENCIL_ENABLE (1 << 0)
+# define R300_Z_ENABLE (1 << 1)
+# define R300_Z_WRITE_ENABLE (1 << 2)
+# define R300_Z_SIGNED_COMPARE (1 << 3)
+# define R300_STENCIL_FRONT_BACK (1 << 4)
-# define R300_RB3D_Z_TEST 0x00000012
-# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016
-# define R300_RB3D_Z_WRITE_ONLY 0x00000006
-# define R300_RB3D_STENCIL_ENABLE 0x00000001
-
-#define R300_RB3D_ZSTENCIL_CNTL_1 0x4F04
+#define R300_ZB_ZSTENCILCNTL 0x4f04
/* functions */
# define R300_ZS_NEVER 0
# define R300_ZS_LESS 1
@@ -1387,52 +1403,166 @@
# define R300_ZS_INVERT 5
# define R300_ZS_INCR_WRAP 6
# define R300_ZS_DECR_WRAP 7
+# define R300_Z_FUNC_SHIFT 0
/* front and back refer to operations done for front
and back faces, i.e. separate stencil function support */
-# define R300_RB3D_ZS1_DEPTH_FUNC_SHIFT 0
-# define R300_RB3D_ZS1_FRONT_FUNC_SHIFT 3
-# define R300_RB3D_ZS1_FRONT_FAIL_OP_SHIFT 6
-# define R300_RB3D_ZS1_FRONT_ZPASS_OP_SHIFT 9
-# define R300_RB3D_ZS1_FRONT_ZFAIL_OP_SHIFT 12
-# define R300_RB3D_ZS1_BACK_FUNC_SHIFT 15
-# define R300_RB3D_ZS1_BACK_FAIL_OP_SHIFT 18
-# define R300_RB3D_ZS1_BACK_ZPASS_OP_SHIFT 21
-# define R300_RB3D_ZS1_BACK_ZFAIL_OP_SHIFT 24
+# define R300_S_FRONT_FUNC_SHIFT 3
+# define R300_S_FRONT_SFAIL_OP_SHIFT 6
+# define R300_S_FRONT_ZPASS_OP_SHIFT 9
+# define R300_S_FRONT_ZFAIL_OP_SHIFT 12
+# define R300_S_BACK_FUNC_SHIFT 15
+# define R300_S_BACK_SFAIL_OP_SHIFT 18
+# define R300_S_BACK_ZPASS_OP_SHIFT 21
+# define R300_S_BACK_ZFAIL_OP_SHIFT 24
-#define R300_RB3D_ZSTENCIL_CNTL_2 0x4F08
-# define R300_RB3D_ZS2_STENCIL_REF_SHIFT 0
-# define R300_RB3D_ZS2_STENCIL_MASK 0xFF
-# define R300_RB3D_ZS2_STENCIL_MASK_SHIFT 8
-# define R300_RB3D_ZS2_STENCIL_WRITE_MASK_SHIFT 16
+#define R300_ZB_STENCILREFMASK 0x4f08
+# define R300_STENCILREF_SHIFT 0
+# define R300_STENCILREF_MASK 0x000000ff
+# define R300_STENCILMASK_SHIFT 8
+# define R300_STENCILMASK_MASK 0x0000ff00
+# define R300_STENCILWRITEMASK_SHIFT 16
+# define R300_STENCILWRITEMASK_MASK 0x00ff0000
/* gap */
-#define R300_RB3D_ZSTENCIL_FORMAT 0x4F10
-# define R300_DEPTH_FORMAT_16BIT_INT_Z (0 << 0)
-# define R300_DEPTH_FORMAT_24BIT_INT_Z (2 << 0)
- /* 16 bit format or some aditional bit ? */
-# define R300_DEPTH_FORMAT_UNK32 (32 << 0)
+#define R300_ZB_FORMAT 0x4f10
+# define R300_DEPTHFORMAT_16BIT_INT_Z (0 << 0)
+# define R300_DEPTHFORMAT_16BIT_13E3 (1 << 0)
+# define R300_DEPTHFORMAT_24BIT_INT_Z_8BIT_STENCIL (2 << 0)
+/* reserved up to (15 << 0) */
+# define R300_INVERT_13E3_LEADING_ONES (0 << 4)
+# define R300_INVERT_13E3_LEADING_ZEROS (1 << 4)
-#define R300_RB3D_EARLY_Z 0x4F14
-# define R300_EARLY_Z_DISABLE (0 << 0)
-# define R300_EARLY_Z_ENABLE (1 << 0)
+#define R300_ZB_ZTOP 0x4F14
+# define R300_ZTOP_DISABLE (0 << 0)
+# define R300_ZTOP_ENABLE (1 << 0)
/* gap */
-#define R300_RB3D_ZCACHE_CTLSTAT 0x4F18 /* GUESS */
-# define R300_RB3D_ZCACHE_UNKNOWN_01 0x1
-# define R300_RB3D_ZCACHE_UNKNOWN_03 0x3
+#define R300_ZB_ZCACHE_CTLSTAT 0x4f18
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_NO_EFFECT (0 << 0)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE (1 << 0)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_NO_EFFECT (0 << 1)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE (1 << 1)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_IDLE (0 << 31)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_BUSY (1 << 31)
+
+#define R300_ZB_BW_CNTL 0x4f1c
+# define R300_HIZ_DISABLE (0 << 0)
+# define R300_HIZ_ENABLE (1 << 0)
+# define R300_HIZ_MIN (0 << 1)
+# define R300_HIZ_MAX (1 << 1)
+# define R300_FAST_FILL_DISABLE (0 << 2)
+# define R300_FAST_FILL_ENABLE (1 << 2)
+# define R300_RD_COMP_DISABLE (0 << 3)
+# define R300_RD_COMP_ENABLE (1 << 3)
+# define R300_WR_COMP_DISABLE (0 << 4)
+# define R300_WR_COMP_ENABLE (1 << 4)
+# define R300_ZB_CB_CLEAR_RMW (0 << 5)
+# define R300_ZB_CB_CLEAR_CACHE_LINEAR (1 << 5)
+# define R300_FORCE_COMPRESSED_STENCIL_VALUE_DISABLE (0 << 6)
+# define R300_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE (1 << 6)
+
+# define R500_ZEQUAL_OPTIMIZE_ENABLE (0 << 7)
+# define R500_ZEQUAL_OPTIMIZE_DISABLE (1 << 7)
+# define R500_SEQUAL_OPTIMIZE_ENABLE (0 << 8)
+# define R500_SEQUAL_OPTIMIZE_DISABLE (1 << 8)
+
+# define R500_BMASK_ENABLE (0 << 10)
+# define R500_BMASK_DISABLE (1 << 10)
+# define R500_HIZ_EQUAL_REJECT_DISABLE (0 << 11)
+# define R500_HIZ_EQUAL_REJECT_ENABLE (1 << 11)
+# define R500_HIZ_FP_EXP_BITS_DISABLE (0 << 12)
+# define R500_HIZ_FP_EXP_BITS_1 (1 << 12)
+# define R500_HIZ_FP_EXP_BITS_2 (2 << 12)
+# define R500_HIZ_FP_EXP_BITS_3 (3 << 12)
+# define R500_HIZ_FP_EXP_BITS_4 (4 << 12)
+# define R500_HIZ_FP_EXP_BITS_5 (5 << 12)
+# define R500_HIZ_FP_INVERT_LEADING_ONES (0 << 15)
+# define R500_HIZ_FP_INVERT_LEADING_ZEROS (1 << 15)
+# define R500_TILE_OVERWRITE_RECOMPRESSION_ENABLE (0 << 16)
+# define R500_TILE_OVERWRITE_RECOMPRESSION_DISABLE (1 << 16)
+# define R500_CONTIGUOUS_6XAA_SAMPLES_ENABLE (0 << 17)
+# define R500_CONTIGUOUS_6XAA_SAMPLES_DISABLE (1 << 17)
+# define R500_PEQ_PACKING_DISABLE (0 << 18)
+# define R500_PEQ_PACKING_ENABLE (1 << 18)
+# define R500_COVERED_PTR_MASKING_DISABLE (0 << 18)
+# define R500_COVERED_PTR_MASKING_ENABLE (1 << 18)
+
/* gap */
-#define R300_RB3D_DEPTHOFFSET 0x4F20
-#define R300_RB3D_DEPTHPITCH 0x4F24
-# define R300_DEPTHPITCH_MASK 0x00001FF8 /* GUESS */
-# define R300_DEPTH_TILE_ENABLE (1 << 16) /* GUESS */
-# define R300_DEPTH_MICROTILE_ENABLE (1 << 17) /* GUESS */
-# define R300_DEPTH_ENDIAN_NO_SWAP (0 << 18) /* GUESS */
-# define R300_DEPTH_ENDIAN_WORD_SWAP (1 << 18) /* GUESS */
-# define R300_DEPTH_ENDIAN_DWORD_SWAP (2 << 18) /* GUESS */
+/* Z Buffer Address Offset.
+ * Bits 31 to 5 are used for aligned Z buffer address offset for macro tiles.
+ */
+#define R300_ZB_DEPTHOFFSET 0x4f20
+
+/* Z Buffer Pitch and Endian Control */
+#define R300_ZB_DEPTHPITCH 0x4f24
+# define R300_DEPTHPITCH_MASK 0x00003FFC
+# define R300_DEPTHMACROTILE_DISABLE (0 << 16)
+# define R300_DEPTHMACROTILE_ENABLE (1 << 16)
+# define R300_DEPTHMICROTILE_LINEAR (0 << 17)
+# define R300_DEPTHMICROTILE_TILED (1 << 17)
+# define R300_DEPTHMICROTILE_TILED_SQUARE (2 << 17)
+# define R300_DEPTHENDIAN_NO_SWAP (0 << 18)
+# define R300_DEPTHENDIAN_WORD_SWAP (1 << 18)
+# define R300_DEPTHENDIAN_DWORD_SWAP (2 << 18)
+# define R300_DEPTHENDIAN_HALF_DWORD_SWAP (3 << 18)
+
+/* Z Buffer Clear Value */
+#define R300_ZB_DEPTHCLEARVALUE 0x4f28
+
+#define R300_ZB_ZMASK_OFFSET 0x4f30
+#define R300_ZB_ZMASK_PITCH 0x4f34
+#define R300_ZB_ZMASK_WRINDEX 0x4f38
+#define R300_ZB_ZMASK_DWORD 0x4f3c
+#define R300_ZB_ZMASK_RDINDEX 0x4f40
+
+/* Hierarchical Z Memory Offset */
+#define R300_ZB_HIZ_OFFSET 0x4f44
+
+/* Hierarchical Z Write Index */
+#define R300_ZB_HIZ_WRINDEX 0x4f48
+
+/* Hierarchical Z Data */
+#define R300_ZB_HIZ_DWORD 0x4f4c
+
+/* Hierarchical Z Read Index */
+#define R300_ZB_HIZ_RDINDEX 0x4f50
+
+/* Hierarchical Z Pitch */
+#define R300_ZB_HIZ_PITCH 0x4f54
+
+/* Z Buffer Z Pass Counter Data */
+#define R300_ZB_ZPASS_DATA 0x4f58
+
+/* Z Buffer Z Pass Counter Address */
+#define R300_ZB_ZPASS_ADDR 0x4f5c
+
+/* Depth buffer X and Y coordinate offset */
+#define R300_ZB_DEPTHXY_OFFSET 0x4f60
+# define R300_DEPTHX_OFFSET_SHIFT 1
+# define R300_DEPTHX_OFFSET_MASK 0x000007FE
+# define R300_DEPTHY_OFFSET_SHIFT 17
+# define R300_DEPTHY_OFFSET_MASK 0x07FE0000
+
+/* Sets the fifo sizes */
+#define R500_ZB_FIFO_SIZE 0x4fd0
+# define R500_OP_FIFO_SIZE_FULL (0 << 0)
+# define R500_OP_FIFO_SIZE_HALF (1 << 0)
+# define R500_OP_FIFO_SIZE_QUATER (2 << 0)
+# define R500_OP_FIFO_SIZE_EIGTHS (4 << 0)
+
+/* Stencil Reference Value and Mask for backfacing quads */
+/* R300_ZB_STENCILREFMASK handles front face */
+#define R500_ZB_STENCILREFMASK_BF 0x4fd4
+# define R500_STENCILREF_SHIFT 0
+# define R500_STENCILREF_MASK 0x000000ff
+# define R500_STENCILMASK_SHIFT 8
+# define R500_STENCILMASK_MASK 0x0000ff00
+# define R500_STENCILWRITEMASK_SHIFT 16
+# define R500_STENCILWRITEMASK_MASK 0x00ff0000
/* BEGIN: Vertex program instruction set */
@@ -1623,4 +1753,20 @@
*/
#define R300_CP_CMD_BITBLT_MULTI 0xC0009B00
+#define R500_VAP_INDEX_OFFSET 0x208c
+
+#define R500_GA_US_VECTOR_INDEX 0x4250
+#define R500_GA_US_VECTOR_DATA 0x4254
+
+#define R500_RS_IP_0 0x4074
+#define R500_RS_INST_0 0x4320
+
+#define R500_US_CONFIG 0x4600
+
+#define R500_US_FC_CTRL 0x4624
+#define R500_US_CODE_ADDR 0x4630
+
+#define R500_RB3D_COLOR_CLEAR_VALUE_AR 0x46c0
+#define R500_RB3D_CONSTANT_COLOR_AR 0x4ef8
+
#endif /* _R300_REG_H */
diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c
index f6f6c92..e53158f 100644
--- a/drivers/char/drm/radeon_cp.c
+++ b/drivers/char/drm/radeon_cp.c
@@ -2,6 +2,7 @@
/*
* Copyright 2000 Precision Insight, Inc., Cedar Park, Texas.
* Copyright 2000 VA Linux Systems, Inc., Fremont, California.
+ * Copyright 2007 Advanced Micro Devices, Inc.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
@@ -34,789 +35,13 @@
#include "radeon_drv.h"
#include "r300_reg.h"
+#include "radeon_microcode.h"
+
#define RADEON_FIFO_DEBUG 0
static int radeon_do_cleanup_cp(struct drm_device * dev);
-/* CP microcode (from ATI) */
-static const u32 R200_cp_microcode[][2] = {
- {0x21007000, 0000000000},
- {0x20007000, 0000000000},
- {0x000000ab, 0x00000004},
- {0x000000af, 0x00000004},
- {0x66544a49, 0000000000},
- {0x49494174, 0000000000},
- {0x54517d83, 0000000000},
- {0x498d8b64, 0000000000},
- {0x49494949, 0000000000},
- {0x49da493c, 0000000000},
- {0x49989898, 0000000000},
- {0xd34949d5, 0000000000},
- {0x9dc90e11, 0000000000},
- {0xce9b9b9b, 0000000000},
- {0x000f0000, 0x00000016},
- {0x352e232c, 0000000000},
- {0x00000013, 0x00000004},
- {0x000f0000, 0x00000016},
- {0x352e272c, 0000000000},
- {0x000f0001, 0x00000016},
- {0x3239362f, 0000000000},
- {0x000077ef, 0x00000002},
- {0x00061000, 0x00000002},
- {0x00000020, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00061000, 0x00000002},
- {0x00000020, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00061000, 0x00000002},
- {0x00000020, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00000016, 0x00000004},
- {0x0003802a, 0x00000002},
- {0x040067e0, 0x00000002},
- {0x00000016, 0x00000004},
- {0x000077e0, 0x00000002},
- {0x00065000, 0x00000002},
- {0x000037e1, 0x00000002},
- {0x040067e1, 0x00000006},
- {0x000077e0, 0x00000002},
- {0x000077e1, 0x00000002},
- {0x000077e1, 0x00000006},
- {0xffffffff, 0000000000},
- {0x10000000, 0000000000},
- {0x0003802a, 0x00000002},
- {0x040067e0, 0x00000006},
- {0x00007675, 0x00000002},
- {0x00007676, 0x00000002},
- {0x00007677, 0x00000002},
- {0x00007678, 0x00000006},
- {0x0003802b, 0x00000002},
- {0x04002676, 0x00000002},
- {0x00007677, 0x00000002},
- {0x00007678, 0x00000006},
- {0x0000002e, 0x00000018},
- {0x0000002e, 0x00000018},
- {0000000000, 0x00000006},
- {0x0000002f, 0x00000018},
- {0x0000002f, 0x00000018},
- {0000000000, 0x00000006},
- {0x01605000, 0x00000002},
- {0x00065000, 0x00000002},
- {0x00098000, 0x00000002},
- {0x00061000, 0x00000002},
- {0x64c0603d, 0x00000004},
- {0x00080000, 0x00000016},
- {0000000000, 0000000000},
- {0x0400251d, 0x00000002},
- {0x00007580, 0x00000002},
- {0x00067581, 0x00000002},
- {0x04002580, 0x00000002},
- {0x00067581, 0x00000002},
- {0x00000046, 0x00000004},
- {0x00005000, 0000000000},
- {0x00061000, 0x00000002},
- {0x0000750e, 0x00000002},
- {0x00019000, 0x00000002},
- {0x00011055, 0x00000014},
- {0x00000055, 0x00000012},
- {0x0400250f, 0x00000002},
- {0x0000504a, 0x00000004},
- {0x00007565, 0x00000002},
- {0x00007566, 0x00000002},
- {0x00000051, 0x00000004},
- {0x01e655b4, 0x00000002},
- {0x4401b0dc, 0x00000002},
- {0x01c110dc, 0x00000002},
- {0x2666705d, 0x00000018},
- {0x040c2565, 0x00000002},
- {0x0000005d, 0x00000018},
- {0x04002564, 0x00000002},
- {0x00007566, 0x00000002},
- {0x00000054, 0x00000004},
- {0x00401060, 0x00000008},
- {0x00101000, 0x00000002},
- {0x000d80ff, 0x00000002},
- {0x00800063, 0x00000008},
- {0x000f9000, 0x00000002},
- {0x000e00ff, 0x00000002},
- {0000000000, 0x00000006},
- {0x00000080, 0x00000018},
- {0x00000054, 0x00000004},
- {0x00007576, 0x00000002},
- {0x00065000, 0x00000002},
- {0x00009000, 0x00000002},
- {0x00041000, 0x00000002},
- {0x0c00350e, 0x00000002},
- {0x00049000, 0x00000002},
- {0x00051000, 0x00000002},
- {0x01e785f8, 0x00000002},
- {0x00200000, 0x00000002},
- {0x00600073, 0x0000000c},
- {0x00007563, 0x00000002},
- {0x006075f0, 0x00000021},
- {0x20007068, 0x00000004},
- {0x00005068, 0x00000004},
- {0x00007576, 0x00000002},
- {0x00007577, 0x00000002},
- {0x0000750e, 0x00000002},
- {0x0000750f, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00600076, 0x0000000c},
- {0x006075f0, 0x00000021},
- {0x000075f8, 0x00000002},
- {0x00000076, 0x00000004},
- {0x000a750e, 0x00000002},
- {0x0020750f, 0x00000002},
- {0x00600079, 0x00000004},
- {0x00007570, 0x00000002},
- {0x00007571, 0x00000002},
- {0x00007572, 0x00000006},
- {0x00005000, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00007568, 0x00000002},
- {0x00061000, 0x00000002},
- {0x00000084, 0x0000000c},
- {0x00058000, 0x00000002},
- {0x0c607562, 0x00000002},
- {0x00000086, 0x00000004},
- {0x00600085, 0x00000004},
- {0x400070dd, 0000000000},
- {0x000380dd, 0x00000002},
- {0x00000093, 0x0000001c},
- {0x00065095, 0x00000018},
- {0x040025bb, 0x00000002},
- {0x00061096, 0x00000018},
- {0x040075bc, 0000000000},
- {0x000075bb, 0x00000002},
- {0x000075bc, 0000000000},
- {0x00090000, 0x00000006},
- {0x00090000, 0x00000002},
- {0x000d8002, 0x00000006},
- {0x00005000, 0x00000002},
- {0x00007821, 0x00000002},
- {0x00007800, 0000000000},
- {0x00007821, 0x00000002},
- {0x00007800, 0000000000},
- {0x01665000, 0x00000002},
- {0x000a0000, 0x00000002},
- {0x000671cc, 0x00000002},
- {0x0286f1cd, 0x00000002},
- {0x000000a3, 0x00000010},
- {0x21007000, 0000000000},
- {0x000000aa, 0x0000001c},
- {0x00065000, 0x00000002},
- {0x000a0000, 0x00000002},
- {0x00061000, 0x00000002},
- {0x000b0000, 0x00000002},
- {0x38067000, 0x00000002},
- {0x000a00a6, 0x00000004},
- {0x20007000, 0000000000},
- {0x01200000, 0x00000002},
- {0x20077000, 0x00000002},
- {0x01200000, 0x00000002},
- {0x20007000, 0000000000},
- {0x00061000, 0x00000002},
- {0x0120751b, 0x00000002},
- {0x8040750a, 0x00000002},
- {0x8040750b, 0x00000002},
- {0x00110000, 0x00000002},
- {0x000380dd, 0x00000002},
- {0x000000bd, 0x0000001c},
- {0x00061096, 0x00000018},
- {0x844075bd, 0x00000002},
- {0x00061095, 0x00000018},
- {0x840075bb, 0x00000002},
- {0x00061096, 0x00000018},
- {0x844075bc, 0x00000002},
- {0x000000c0, 0x00000004},
- {0x804075bd, 0x00000002},
- {0x800075bb, 0x00000002},
- {0x804075bc, 0x00000002},
- {0x00108000, 0x00000002},
- {0x01400000, 0x00000002},
- {0x006000c4, 0x0000000c},
- {0x20c07000, 0x00000020},
- {0x000000c6, 0x00000012},
- {0x00800000, 0x00000006},
- {0x0080751d, 0x00000006},
- {0x000025bb, 0x00000002},
- {0x000040c0, 0x00000004},
- {0x0000775c, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00661000, 0x00000002},
- {0x0460275d, 0x00000020},
- {0x00004000, 0000000000},
- {0x00007999, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00661000, 0x00000002},
- {0x0460299b, 0x00000020},
- {0x00004000, 0000000000},
- {0x01e00830, 0x00000002},
- {0x21007000, 0000000000},
- {0x00005000, 0x00000002},
- {0x00038042, 0x00000002},
- {0x040025e0, 0x00000002},
- {0x000075e1, 0000000000},
- {0x00000001, 0000000000},
- {0x000380d9, 0x00000002},
- {0x04007394, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
-};
-
-static const u32 radeon_cp_microcode[][2] = {
- {0x21007000, 0000000000},
- {0x20007000, 0000000000},
- {0x000000b4, 0x00000004},
- {0x000000b8, 0x00000004},
- {0x6f5b4d4c, 0000000000},
- {0x4c4c427f, 0000000000},
- {0x5b568a92, 0000000000},
- {0x4ca09c6d, 0000000000},
- {0xad4c4c4c, 0000000000},
- {0x4ce1af3d, 0000000000},
- {0xd8afafaf, 0000000000},
- {0xd64c4cdc, 0000000000},
- {0x4cd10d10, 0000000000},
- {0x000f0000, 0x00000016},
- {0x362f242d, 0000000000},
- {0x00000012, 0x00000004},
- {0x000f0000, 0x00000016},
- {0x362f282d, 0000000000},
- {0x000380e7, 0x00000002},
- {0x04002c97, 0x00000002},
- {0x000f0001, 0x00000016},
- {0x333a3730, 0000000000},
- {0x000077ef, 0x00000002},
- {0x00061000, 0x00000002},
- {0x00000021, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00061000, 0x00000002},
- {0x00000021, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00061000, 0x00000002},
- {0x00000021, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00000017, 0x00000004},
- {0x0003802b, 0x00000002},
- {0x040067e0, 0x00000002},
- {0x00000017, 0x00000004},
- {0x000077e0, 0x00000002},
- {0x00065000, 0x00000002},
- {0x000037e1, 0x00000002},
- {0x040067e1, 0x00000006},
- {0x000077e0, 0x00000002},
- {0x000077e1, 0x00000002},
- {0x000077e1, 0x00000006},
- {0xffffffff, 0000000000},
- {0x10000000, 0000000000},
- {0x0003802b, 0x00000002},
- {0x040067e0, 0x00000006},
- {0x00007675, 0x00000002},
- {0x00007676, 0x00000002},
- {0x00007677, 0x00000002},
- {0x00007678, 0x00000006},
- {0x0003802c, 0x00000002},
- {0x04002676, 0x00000002},
- {0x00007677, 0x00000002},
- {0x00007678, 0x00000006},
- {0x0000002f, 0x00000018},
- {0x0000002f, 0x00000018},
- {0000000000, 0x00000006},
- {0x00000030, 0x00000018},
- {0x00000030, 0x00000018},
- {0000000000, 0x00000006},
- {0x01605000, 0x00000002},
- {0x00065000, 0x00000002},
- {0x00098000, 0x00000002},
- {0x00061000, 0x00000002},
- {0x64c0603e, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00080000, 0x00000016},
- {0000000000, 0000000000},
- {0x0400251d, 0x00000002},
- {0x00007580, 0x00000002},
- {0x00067581, 0x00000002},
- {0x04002580, 0x00000002},
- {0x00067581, 0x00000002},
- {0x00000049, 0x00000004},
- {0x00005000, 0000000000},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00061000, 0x00000002},
- {0x0000750e, 0x00000002},
- {0x00019000, 0x00000002},
- {0x00011055, 0x00000014},
- {0x00000055, 0x00000012},
- {0x0400250f, 0x00000002},
- {0x0000504f, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00007565, 0x00000002},
- {0x00007566, 0x00000002},
- {0x00000058, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x01e655b4, 0x00000002},
- {0x4401b0e4, 0x00000002},
- {0x01c110e4, 0x00000002},
- {0x26667066, 0x00000018},
- {0x040c2565, 0x00000002},
- {0x00000066, 0x00000018},
- {0x04002564, 0x00000002},
- {0x00007566, 0x00000002},
- {0x0000005d, 0x00000004},
- {0x00401069, 0x00000008},
- {0x00101000, 0x00000002},
- {0x000d80ff, 0x00000002},
- {0x0080006c, 0x00000008},
- {0x000f9000, 0x00000002},
- {0x000e00ff, 0x00000002},
- {0000000000, 0x00000006},
- {0x0000008f, 0x00000018},
- {0x0000005b, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00007576, 0x00000002},
- {0x00065000, 0x00000002},
- {0x00009000, 0x00000002},
- {0x00041000, 0x00000002},
- {0x0c00350e, 0x00000002},
- {0x00049000, 0x00000002},
- {0x00051000, 0x00000002},
- {0x01e785f8, 0x00000002},
- {0x00200000, 0x00000002},
- {0x0060007e, 0x0000000c},
- {0x00007563, 0x00000002},
- {0x006075f0, 0x00000021},
- {0x20007073, 0x00000004},
- {0x00005073, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00007576, 0x00000002},
- {0x00007577, 0x00000002},
- {0x0000750e, 0x00000002},
- {0x0000750f, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00600083, 0x0000000c},
- {0x006075f0, 0x00000021},
- {0x000075f8, 0x00000002},
- {0x00000083, 0x00000004},
- {0x000a750e, 0x00000002},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x0020750f, 0x00000002},
- {0x00600086, 0x00000004},
- {0x00007570, 0x00000002},
- {0x00007571, 0x00000002},
- {0x00007572, 0x00000006},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00005000, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00007568, 0x00000002},
- {0x00061000, 0x00000002},
- {0x00000095, 0x0000000c},
- {0x00058000, 0x00000002},
- {0x0c607562, 0x00000002},
- {0x00000097, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00600096, 0x00000004},
- {0x400070e5, 0000000000},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x000380e5, 0x00000002},
- {0x000000a8, 0x0000001c},
- {0x000650aa, 0x00000018},
- {0x040025bb, 0x00000002},
- {0x000610ab, 0x00000018},
- {0x040075bc, 0000000000},
- {0x000075bb, 0x00000002},
- {0x000075bc, 0000000000},
- {0x00090000, 0x00000006},
- {0x00090000, 0x00000002},
- {0x000d8002, 0x00000006},
- {0x00007832, 0x00000002},
- {0x00005000, 0x00000002},
- {0x000380e7, 0x00000002},
- {0x04002c97, 0x00000002},
- {0x00007820, 0x00000002},
- {0x00007821, 0x00000002},
- {0x00007800, 0000000000},
- {0x01200000, 0x00000002},
- {0x20077000, 0x00000002},
- {0x01200000, 0x00000002},
- {0x20007000, 0x00000002},
- {0x00061000, 0x00000002},
- {0x0120751b, 0x00000002},
- {0x8040750a, 0x00000002},
- {0x8040750b, 0x00000002},
- {0x00110000, 0x00000002},
- {0x000380e5, 0x00000002},
- {0x000000c6, 0x0000001c},
- {0x000610ab, 0x00000018},
- {0x844075bd, 0x00000002},
- {0x000610aa, 0x00000018},
- {0x840075bb, 0x00000002},
- {0x000610ab, 0x00000018},
- {0x844075bc, 0x00000002},
- {0x000000c9, 0x00000004},
- {0x804075bd, 0x00000002},
- {0x800075bb, 0x00000002},
- {0x804075bc, 0x00000002},
- {0x00108000, 0x00000002},
- {0x01400000, 0x00000002},
- {0x006000cd, 0x0000000c},
- {0x20c07000, 0x00000020},
- {0x000000cf, 0x00000012},
- {0x00800000, 0x00000006},
- {0x0080751d, 0x00000006},
- {0000000000, 0000000000},
- {0x0000775c, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00661000, 0x00000002},
- {0x0460275d, 0x00000020},
- {0x00004000, 0000000000},
- {0x01e00830, 0x00000002},
- {0x21007000, 0000000000},
- {0x6464614d, 0000000000},
- {0x69687420, 0000000000},
- {0x00000073, 0000000000},
- {0000000000, 0000000000},
- {0x00005000, 0x00000002},
- {0x000380d0, 0x00000002},
- {0x040025e0, 0x00000002},
- {0x000075e1, 0000000000},
- {0x00000001, 0000000000},
- {0x000380e0, 0x00000002},
- {0x04002394, 0x00000002},
- {0x00005000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0x00000008, 0000000000},
- {0x00000004, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
-};
-
-static const u32 R300_cp_microcode[][2] = {
- {0x4200e000, 0000000000},
- {0x4000e000, 0000000000},
- {0x000000af, 0x00000008},
- {0x000000b3, 0x00000008},
- {0x6c5a504f, 0000000000},
- {0x4f4f497a, 0000000000},
- {0x5a578288, 0000000000},
- {0x4f91906a, 0000000000},
- {0x4f4f4f4f, 0000000000},
- {0x4fe24f44, 0000000000},
- {0x4f9c9c9c, 0000000000},
- {0xdc4f4fde, 0000000000},
- {0xa1cd4f4f, 0000000000},
- {0xd29d9d9d, 0000000000},
- {0x4f0f9fd7, 0000000000},
- {0x000ca000, 0x00000004},
- {0x000d0012, 0x00000038},
- {0x0000e8b4, 0x00000004},
- {0x000d0014, 0x00000038},
- {0x0000e8b6, 0x00000004},
- {0x000d0016, 0x00000038},
- {0x0000e854, 0x00000004},
- {0x000d0018, 0x00000038},
- {0x0000e855, 0x00000004},
- {0x000d001a, 0x00000038},
- {0x0000e856, 0x00000004},
- {0x000d001c, 0x00000038},
- {0x0000e857, 0x00000004},
- {0x000d001e, 0x00000038},
- {0x0000e824, 0x00000004},
- {0x000d0020, 0x00000038},
- {0x0000e825, 0x00000004},
- {0x000d0022, 0x00000038},
- {0x0000e830, 0x00000004},
- {0x000d0024, 0x00000038},
- {0x0000f0c0, 0x00000004},
- {0x000d0026, 0x00000038},
- {0x0000f0c1, 0x00000004},
- {0x000d0028, 0x00000038},
- {0x0000f041, 0x00000004},
- {0x000d002a, 0x00000038},
- {0x0000f184, 0x00000004},
- {0x000d002c, 0x00000038},
- {0x0000f185, 0x00000004},
- {0x000d002e, 0x00000038},
- {0x0000f186, 0x00000004},
- {0x000d0030, 0x00000038},
- {0x0000f187, 0x00000004},
- {0x000d0032, 0x00000038},
- {0x0000f180, 0x00000004},
- {0x000d0034, 0x00000038},
- {0x0000f393, 0x00000004},
- {0x000d0036, 0x00000038},
- {0x0000f38a, 0x00000004},
- {0x000d0038, 0x00000038},
- {0x0000f38e, 0x00000004},
- {0x0000e821, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x00000043, 0x00000018},
- {0x00cce800, 0x00000004},
- {0x001b0001, 0x00000004},
- {0x08004800, 0x00000004},
- {0x001b0001, 0x00000004},
- {0x08004800, 0x00000004},
- {0x001b0001, 0x00000004},
- {0x08004800, 0x00000004},
- {0x0000003a, 0x00000008},
- {0x0000a000, 0000000000},
- {0x02c0a000, 0x00000004},
- {0x000ca000, 0x00000004},
- {0x00130000, 0x00000004},
- {0x000c2000, 0x00000004},
- {0xc980c045, 0x00000008},
- {0x2000451d, 0x00000004},
- {0x0000e580, 0x00000004},
- {0x000ce581, 0x00000004},
- {0x08004580, 0x00000004},
- {0x000ce581, 0x00000004},
- {0x0000004c, 0x00000008},
- {0x0000a000, 0000000000},
- {0x000c2000, 0x00000004},
- {0x0000e50e, 0x00000004},
- {0x00032000, 0x00000004},
- {0x00022056, 0x00000028},
- {0x00000056, 0x00000024},
- {0x0800450f, 0x00000004},
- {0x0000a050, 0x00000008},
- {0x0000e565, 0x00000004},
- {0x0000e566, 0x00000004},
- {0x00000057, 0x00000008},
- {0x03cca5b4, 0x00000004},
- {0x05432000, 0x00000004},
- {0x00022000, 0x00000004},
- {0x4ccce063, 0x00000030},
- {0x08274565, 0x00000004},
- {0x00000063, 0x00000030},
- {0x08004564, 0x00000004},
- {0x0000e566, 0x00000004},
- {0x0000005a, 0x00000008},
- {0x00802066, 0x00000010},
- {0x00202000, 0x00000004},
- {0x001b00ff, 0x00000004},
- {0x01000069, 0x00000010},
- {0x001f2000, 0x00000004},
- {0x001c00ff, 0x00000004},
- {0000000000, 0x0000000c},
- {0x00000085, 0x00000030},
- {0x0000005a, 0x00000008},
- {0x0000e576, 0x00000004},
- {0x000ca000, 0x00000004},
- {0x00012000, 0x00000004},
- {0x00082000, 0x00000004},
- {0x1800650e, 0x00000004},
- {0x00092000, 0x00000004},
- {0x000a2000, 0x00000004},
- {0x000f0000, 0x00000004},
- {0x00400000, 0x00000004},
- {0x00000079, 0x00000018},
- {0x0000e563, 0x00000004},
- {0x00c0e5f9, 0x000000c2},
- {0x0000006e, 0x00000008},
- {0x0000a06e, 0x00000008},
- {0x0000e576, 0x00000004},
- {0x0000e577, 0x00000004},
- {0x0000e50e, 0x00000004},
- {0x0000e50f, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x0000007c, 0x00000018},
- {0x00c0e5f9, 0x000000c2},
- {0x0000007c, 0x00000008},
- {0x0014e50e, 0x00000004},
- {0x0040e50f, 0x00000004},
- {0x00c0007f, 0x00000008},
- {0x0000e570, 0x00000004},
- {0x0000e571, 0x00000004},
- {0x0000e572, 0x0000000c},
- {0x0000a000, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x0000e568, 0x00000004},
- {0x000c2000, 0x00000004},
- {0x00000089, 0x00000018},
- {0x000b0000, 0x00000004},
- {0x18c0e562, 0x00000004},
- {0x0000008b, 0x00000008},
- {0x00c0008a, 0x00000008},
- {0x000700e4, 0x00000004},
- {0x00000097, 0x00000038},
- {0x000ca099, 0x00000030},
- {0x080045bb, 0x00000004},
- {0x000c209a, 0x00000030},
- {0x0800e5bc, 0000000000},
- {0x0000e5bb, 0x00000004},
- {0x0000e5bc, 0000000000},
- {0x00120000, 0x0000000c},
- {0x00120000, 0x00000004},
- {0x001b0002, 0x0000000c},
- {0x0000a000, 0x00000004},
- {0x0000e821, 0x00000004},
- {0x0000e800, 0000000000},
- {0x0000e821, 0x00000004},
- {0x0000e82e, 0000000000},
- {0x02cca000, 0x00000004},
- {0x00140000, 0x00000004},
- {0x000ce1cc, 0x00000004},
- {0x050de1cd, 0x00000004},
- {0x000000a7, 0x00000020},
- {0x4200e000, 0000000000},
- {0x000000ae, 0x00000038},
- {0x000ca000, 0x00000004},
- {0x00140000, 0x00000004},
- {0x000c2000, 0x00000004},
- {0x00160000, 0x00000004},
- {0x700ce000, 0x00000004},
- {0x001400aa, 0x00000008},
- {0x4000e000, 0000000000},
- {0x02400000, 0x00000004},
- {0x400ee000, 0x00000004},
- {0x02400000, 0x00000004},
- {0x4000e000, 0000000000},
- {0x000c2000, 0x00000004},
- {0x0240e51b, 0x00000004},
- {0x0080e50a, 0x00000005},
- {0x0080e50b, 0x00000005},
- {0x00220000, 0x00000004},
- {0x000700e4, 0x00000004},
- {0x000000c1, 0x00000038},
- {0x000c209a, 0x00000030},
- {0x0880e5bd, 0x00000005},
- {0x000c2099, 0x00000030},
- {0x0800e5bb, 0x00000005},
- {0x000c209a, 0x00000030},
- {0x0880e5bc, 0x00000005},
- {0x000000c4, 0x00000008},
- {0x0080e5bd, 0x00000005},
- {0x0000e5bb, 0x00000005},
- {0x0080e5bc, 0x00000005},
- {0x00210000, 0x00000004},
- {0x02800000, 0x00000004},
- {0x00c000c8, 0x00000018},
- {0x4180e000, 0x00000040},
- {0x000000ca, 0x00000024},
- {0x01000000, 0x0000000c},
- {0x0100e51d, 0x0000000c},
- {0x000045bb, 0x00000004},
- {0x000080c4, 0x00000008},
- {0x0000f3ce, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x00cc2000, 0x00000004},
- {0x08c053cf, 0x00000040},
- {0x00008000, 0000000000},
- {0x0000f3d2, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x00cc2000, 0x00000004},
- {0x08c053d3, 0x00000040},
- {0x00008000, 0000000000},
- {0x0000f39d, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x00cc2000, 0x00000004},
- {0x08c0539e, 0x00000040},
- {0x00008000, 0000000000},
- {0x03c00830, 0x00000004},
- {0x4200e000, 0000000000},
- {0x0000a000, 0x00000004},
- {0x200045e0, 0x00000004},
- {0x0000e5e1, 0000000000},
- {0x00000001, 0000000000},
- {0x000700e1, 0x00000004},
- {0x0800e394, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
-};
-
-static u32 RADEON_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
+static u32 R500_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
{
u32 ret;
RADEON_WRITE(R520_MC_IND_INDEX, 0x7f0000 | (addr & 0xff));
@@ -825,21 +50,41 @@
return ret;
}
+static u32 RS480_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
+{
+ u32 ret;
+ RADEON_WRITE(RS480_NB_MC_INDEX, addr & 0xff);
+ ret = RADEON_READ(RS480_NB_MC_DATA);
+ RADEON_WRITE(RS480_NB_MC_INDEX, 0xff);
+ return ret;
+}
+
static u32 RS690_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
{
+ u32 ret;
RADEON_WRITE(RS690_MC_INDEX, (addr & RS690_MC_INDEX_MASK));
- return RADEON_READ(RS690_MC_DATA);
+ ret = RADEON_READ(RS690_MC_DATA);
+ RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_MASK);
+ return ret;
+}
+
+static u32 IGP_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
+{
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690)
+ return RS690_READ_MCIND(dev_priv, addr);
+ else
+ return RS480_READ_MCIND(dev_priv, addr);
}
u32 radeon_read_fb_location(drm_radeon_private_t *dev_priv)
{
if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515)
- return RADEON_READ_MCIND(dev_priv, RV515_MC_FB_LOCATION);
+ return R500_READ_MCIND(dev_priv, RV515_MC_FB_LOCATION);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690)
return RS690_READ_MCIND(dev_priv, RS690_MC_FB_LOCATION);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515)
- return RADEON_READ_MCIND(dev_priv, R520_MC_FB_LOCATION);
+ return R500_READ_MCIND(dev_priv, R520_MC_FB_LOCATION);
else
return RADEON_READ(RADEON_MC_FB_LOCATION);
}
@@ -847,11 +92,11 @@
static void radeon_write_fb_location(drm_radeon_private_t *dev_priv, u32 fb_loc)
{
if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515)
- RADEON_WRITE_MCIND(RV515_MC_FB_LOCATION, fb_loc);
+ R500_WRITE_MCIND(RV515_MC_FB_LOCATION, fb_loc);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690)
RS690_WRITE_MCIND(RS690_MC_FB_LOCATION, fb_loc);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515)
- RADEON_WRITE_MCIND(R520_MC_FB_LOCATION, fb_loc);
+ R500_WRITE_MCIND(R520_MC_FB_LOCATION, fb_loc);
else
RADEON_WRITE(RADEON_MC_FB_LOCATION, fb_loc);
}
@@ -859,15 +104,39 @@
static void radeon_write_agp_location(drm_radeon_private_t *dev_priv, u32 agp_loc)
{
if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515)
- RADEON_WRITE_MCIND(RV515_MC_AGP_LOCATION, agp_loc);
+ R500_WRITE_MCIND(RV515_MC_AGP_LOCATION, agp_loc);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690)
RS690_WRITE_MCIND(RS690_MC_AGP_LOCATION, agp_loc);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515)
- RADEON_WRITE_MCIND(R520_MC_AGP_LOCATION, agp_loc);
+ R500_WRITE_MCIND(R520_MC_AGP_LOCATION, agp_loc);
else
RADEON_WRITE(RADEON_MC_AGP_LOCATION, agp_loc);
}
+static void radeon_write_agp_base(drm_radeon_private_t *dev_priv, u64 agp_base)
+{
+ u32 agp_base_hi = upper_32_bits(agp_base);
+ u32 agp_base_lo = agp_base & 0xffffffff;
+
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) {
+ R500_WRITE_MCIND(RV515_MC_AGP_BASE, agp_base_lo);
+ R500_WRITE_MCIND(RV515_MC_AGP_BASE_2, agp_base_hi);
+ } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) {
+ RS690_WRITE_MCIND(RS690_MC_AGP_BASE, agp_base_lo);
+ RS690_WRITE_MCIND(RS690_MC_AGP_BASE_2, agp_base_hi);
+ } else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) {
+ R500_WRITE_MCIND(R520_MC_AGP_BASE, agp_base_lo);
+ R500_WRITE_MCIND(R520_MC_AGP_BASE_2, agp_base_hi);
+ } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480) {
+ RADEON_WRITE(RADEON_AGP_BASE, agp_base_lo);
+ RADEON_WRITE(RS480_AGP_BASE_2, 0);
+ } else {
+ RADEON_WRITE(RADEON_AGP_BASE, agp_base_lo);
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R200)
+ RADEON_WRITE(RADEON_AGP_BASE_2, agp_base_hi);
+ }
+}
+
static int RADEON_READ_PLL(struct drm_device * dev, int addr)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
@@ -882,15 +151,6 @@
return RADEON_READ(RADEON_PCIE_DATA);
}
-static u32 RADEON_READ_IGPGART(drm_radeon_private_t *dev_priv, int addr)
-{
- u32 ret;
- RADEON_WRITE(RADEON_IGPGART_INDEX, addr & 0x7f);
- ret = RADEON_READ(RADEON_IGPGART_DATA);
- RADEON_WRITE(RADEON_IGPGART_INDEX, 0x7f);
- return ret;
-}
-
#if RADEON_FIFO_DEBUG
static void radeon_status(drm_radeon_private_t * dev_priv)
{
@@ -925,16 +185,36 @@
dev_priv->stats.boxes |= RADEON_BOX_WAIT_IDLE;
- tmp = RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT);
- tmp |= RADEON_RB3D_DC_FLUSH_ALL;
- RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp);
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) {
+ tmp = RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT);
+ tmp |= RADEON_RB3D_DC_FLUSH_ALL;
+ RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp);
- for (i = 0; i < dev_priv->usec_timeout; i++) {
- if (!(RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT)
- & RADEON_RB3D_DC_BUSY)) {
- return 0;
+ for (i = 0; i < dev_priv->usec_timeout; i++) {
+ if (!(RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT)
+ & RADEON_RB3D_DC_BUSY)) {
+ return 0;
+ }
+ DRM_UDELAY(1);
}
- DRM_UDELAY(1);
+ } else {
+ /* 3D */
+ tmp = RADEON_READ(R300_RB3D_DSTCACHE_CTLSTAT);
+ tmp |= RADEON_RB3D_DC_FLUSH_ALL;
+ RADEON_WRITE(R300_RB3D_DSTCACHE_CTLSTAT, tmp);
+
+ /* 2D */
+ tmp = RADEON_READ(R300_DSTCACHE_CTLSTAT);
+ tmp |= RADEON_RB3D_DC_FLUSH_ALL;
+ RADEON_WRITE(R300_DSTCACHE_CTLSTAT, tmp);
+
+ for (i = 0; i < dev_priv->usec_timeout; i++) {
+ if (!(RADEON_READ(R300_DSTCACHE_CTLSTAT)
+ & RADEON_RB3D_DC_BUSY)) {
+ return 0;
+ }
+ DRM_UDELAY(1);
+ }
}
#if RADEON_FIFO_DEBUG
@@ -991,6 +271,50 @@
return -EBUSY;
}
+static void radeon_init_pipes(drm_radeon_private_t *dev_priv)
+{
+ uint32_t gb_tile_config, gb_pipe_sel = 0;
+
+ /* RS4xx/RS6xx/R4xx/R5xx */
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R420) {
+ gb_pipe_sel = RADEON_READ(R400_GB_PIPE_SELECT);
+ dev_priv->num_gb_pipes = ((gb_pipe_sel >> 12) & 0x3) + 1;
+ } else {
+ /* R3xx */
+ if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350)) {
+ dev_priv->num_gb_pipes = 2;
+ } else {
+ /* R3Vxx */
+ dev_priv->num_gb_pipes = 1;
+ }
+ }
+ DRM_INFO("Num pipes: %d\n", dev_priv->num_gb_pipes);
+
+ gb_tile_config = (R300_ENABLE_TILING | R300_TILE_SIZE_16 /*| R300_SUBPIXEL_1_16*/);
+
+ switch (dev_priv->num_gb_pipes) {
+ case 2: gb_tile_config |= R300_PIPE_COUNT_R300; break;
+ case 3: gb_tile_config |= R300_PIPE_COUNT_R420_3P; break;
+ case 4: gb_tile_config |= R300_PIPE_COUNT_R420; break;
+ default:
+ case 1: gb_tile_config |= R300_PIPE_COUNT_RV350; break;
+ }
+
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) {
+ RADEON_WRITE_PLL(R500_DYN_SCLK_PWMEM_PIPE, (1 | ((gb_pipe_sel >> 8) & 0xf) << 4));
+ RADEON_WRITE(R500_SU_REG_DEST, ((1 << dev_priv->num_gb_pipes) - 1));
+ }
+ RADEON_WRITE(R300_GB_TILE_CONFIG, gb_tile_config);
+ radeon_do_wait_for_idle(dev_priv);
+ RADEON_WRITE(R300_DST_PIPE_CONFIG, RADEON_READ(R300_DST_PIPE_CONFIG) | R300_PIPE_AUTO_CONFIG);
+ RADEON_WRITE(R300_RB2D_DSTCACHE_MODE, (RADEON_READ(R300_RB2D_DSTCACHE_MODE) |
+ R300_DC_AUTOFLUSH_ENABLE |
+ R300_DC_DC_DISABLE_IGNORE_PE));
+
+
+}
+
/* ================================================================
* CP control, initialization
*/
@@ -1004,8 +328,22 @@
radeon_do_wait_for_idle(dev_priv);
RADEON_WRITE(RADEON_CP_ME_RAM_ADDR, 0);
-
- if (dev_priv->microcode_version == UCODE_R200) {
+ if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R100) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV100) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV200) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS100) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS200)) {
+ DRM_INFO("Loading R100 Microcode\n");
+ for (i = 0; i < 256; i++) {
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
+ R100_cp_microcode[i][1]);
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
+ R100_cp_microcode[i][0]);
+ }
+ } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R200) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV250) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV280) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS300)) {
DRM_INFO("Loading R200 Microcode\n");
for (i = 0; i < 256; i++) {
RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
@@ -1013,7 +351,11 @@
RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
R200_cp_microcode[i][0]);
}
- } else if (dev_priv->microcode_version == UCODE_R300) {
+ } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV350) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV380) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480)) {
DRM_INFO("Loading R300 Microcode\n");
for (i = 0; i < 256; i++) {
RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
@@ -1021,12 +363,35 @@
RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
R300_cp_microcode[i][0]);
}
- } else {
+ } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R420) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV410)) {
+ DRM_INFO("Loading R400 Microcode\n");
for (i = 0; i < 256; i++) {
RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
- radeon_cp_microcode[i][1]);
+ R420_cp_microcode[i][1]);
RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
- radeon_cp_microcode[i][0]);
+ R420_cp_microcode[i][0]);
+ }
+ } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) {
+ DRM_INFO("Loading RS690 Microcode\n");
+ for (i = 0; i < 256; i++) {
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
+ RS690_cp_microcode[i][1]);
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
+ RS690_cp_microcode[i][0]);
+ }
+ } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R520) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV530) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R580) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV560) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV570)) {
+ DRM_INFO("Loading R500 Microcode\n");
+ for (i = 0; i < 256; i++) {
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
+ R520_cp_microcode[i][1]);
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
+ R520_cp_microcode[i][0]);
}
}
}
@@ -1121,12 +486,13 @@
static int radeon_do_engine_reset(struct drm_device * dev)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
- u32 clock_cntl_index, mclk_cntl, rbbm_soft_reset;
+ u32 clock_cntl_index = 0, mclk_cntl = 0, rbbm_soft_reset;
DRM_DEBUG("\n");
radeon_do_pixcache_flush(dev_priv);
- if ((dev_priv->flags & RADEON_FAMILY_MASK) < CHIP_RV515) {
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV410) {
+ /* may need something similar for newer chips */
clock_cntl_index = RADEON_READ(RADEON_CLOCK_CNTL_INDEX);
mclk_cntl = RADEON_READ_PLL(dev, RADEON_MCLK_CNTL);
@@ -1137,33 +503,39 @@
RADEON_FORCEON_YCLKB |
RADEON_FORCEON_MC |
RADEON_FORCEON_AIC));
+ }
- rbbm_soft_reset = RADEON_READ(RADEON_RBBM_SOFT_RESET);
+ rbbm_soft_reset = RADEON_READ(RADEON_RBBM_SOFT_RESET);
- RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset |
- RADEON_SOFT_RESET_CP |
- RADEON_SOFT_RESET_HI |
- RADEON_SOFT_RESET_SE |
- RADEON_SOFT_RESET_RE |
- RADEON_SOFT_RESET_PP |
- RADEON_SOFT_RESET_E2 |
- RADEON_SOFT_RESET_RB));
- RADEON_READ(RADEON_RBBM_SOFT_RESET);
- RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset &
- ~(RADEON_SOFT_RESET_CP |
- RADEON_SOFT_RESET_HI |
- RADEON_SOFT_RESET_SE |
- RADEON_SOFT_RESET_RE |
- RADEON_SOFT_RESET_PP |
- RADEON_SOFT_RESET_E2 |
- RADEON_SOFT_RESET_RB)));
- RADEON_READ(RADEON_RBBM_SOFT_RESET);
+ RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset |
+ RADEON_SOFT_RESET_CP |
+ RADEON_SOFT_RESET_HI |
+ RADEON_SOFT_RESET_SE |
+ RADEON_SOFT_RESET_RE |
+ RADEON_SOFT_RESET_PP |
+ RADEON_SOFT_RESET_E2 |
+ RADEON_SOFT_RESET_RB));
+ RADEON_READ(RADEON_RBBM_SOFT_RESET);
+ RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset &
+ ~(RADEON_SOFT_RESET_CP |
+ RADEON_SOFT_RESET_HI |
+ RADEON_SOFT_RESET_SE |
+ RADEON_SOFT_RESET_RE |
+ RADEON_SOFT_RESET_PP |
+ RADEON_SOFT_RESET_E2 |
+ RADEON_SOFT_RESET_RB)));
+ RADEON_READ(RADEON_RBBM_SOFT_RESET);
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV410) {
RADEON_WRITE_PLL(RADEON_MCLK_CNTL, mclk_cntl);
RADEON_WRITE(RADEON_CLOCK_CNTL_INDEX, clock_cntl_index);
RADEON_WRITE(RADEON_RBBM_SOFT_RESET, rbbm_soft_reset);
}
+ /* setup the raster pipes */
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R300)
+ radeon_init_pipes(dev_priv);
+
/* Reset the CP ring */
radeon_do_cp_reset(dev_priv);
@@ -1194,7 +566,8 @@
#if __OS_HAS_AGP
if (dev_priv->flags & RADEON_IS_AGP) {
- RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev->agp->base);
+ radeon_write_agp_base(dev_priv, dev->agp->base);
+
radeon_write_agp_location(dev_priv,
(((dev_priv->gart_vm_start - 1 +
dev_priv->gart_size) & 0xffff0000) |
@@ -1339,102 +712,70 @@
/* Enable or disable IGP GART on the chip */
static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on)
{
- u32 temp, tmp;
-
- tmp = RADEON_READ(RADEON_AIC_CNTL);
- if (on) {
- DRM_DEBUG("programming igpgart %08X %08lX %08X\n",
- dev_priv->gart_vm_start,
- (long)dev_priv->gart_info.bus_addr,
- dev_priv->gart_size);
-
- RADEON_WRITE_IGPGART(RADEON_IGPGART_UNK_18, 0x1000);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_ENABLE, 0x1);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_CTRL, 0x42040800);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_BASE_ADDR,
- dev_priv->gart_info.bus_addr);
-
- temp = RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_UNK_39);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_UNK_39, temp);
-
- RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev_priv->gart_vm_start);
- dev_priv->gart_size = 32*1024*1024;
- radeon_write_agp_location(dev_priv,
- (((dev_priv->gart_vm_start - 1 +
- dev_priv->gart_size) & 0xffff0000) |
- (dev_priv->gart_vm_start >> 16)));
-
- temp = RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_ENABLE);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_ENABLE, temp);
-
- RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_FLUSH);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_FLUSH, 0x1);
- RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_FLUSH);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_FLUSH, 0x0);
- }
-}
-
-/* Enable or disable RS690 GART on the chip */
-static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on)
-{
u32 temp;
if (on) {
- DRM_DEBUG("programming rs690 gart %08X %08lX %08X\n",
+ DRM_DEBUG("programming igp gart %08X %08lX %08X\n",
dev_priv->gart_vm_start,
(long)dev_priv->gart_info.bus_addr,
dev_priv->gart_size);
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_MISC_CNTL);
- RS690_WRITE_MCIND(RS690_MC_MISC_CNTL, 0x5000);
+ temp = IGP_READ_MCIND(dev_priv, RS480_MC_MISC_CNTL);
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690)
+ IGP_WRITE_MCIND(RS480_MC_MISC_CNTL, (RS480_GART_INDEX_REG_EN |
+ RS690_BLOCK_GFX_D3_EN));
+ else
+ IGP_WRITE_MCIND(RS480_MC_MISC_CNTL, RS480_GART_INDEX_REG_EN);
- RS690_WRITE_MCIND(RS690_MC_AGP_SIZE,
- RS690_MC_GART_EN | RS690_MC_AGP_SIZE_32MB);
+ IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, (RS480_GART_EN |
+ RS480_VA_SIZE_32MB));
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_FEATURE_ID);
- RS690_WRITE_MCIND(RS690_MC_GART_FEATURE_ID, 0x42040800);
+ temp = IGP_READ_MCIND(dev_priv, RS480_GART_FEATURE_ID);
+ IGP_WRITE_MCIND(RS480_GART_FEATURE_ID, (RS480_HANG_EN |
+ RS480_TLB_ENABLE |
+ RS480_GTW_LAC_EN |
+ RS480_1LEVEL_GART));
- RS690_WRITE_MCIND(RS690_MC_GART_BASE,
- dev_priv->gart_info.bus_addr);
+ temp = dev_priv->gart_info.bus_addr & 0xfffff000;
+ temp |= (upper_32_bits(dev_priv->gart_info.bus_addr) & 0xff) << 4;
+ IGP_WRITE_MCIND(RS480_GART_BASE, temp);
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_AGP_MODE_CONTROL);
- RS690_WRITE_MCIND(RS690_MC_AGP_MODE_CONTROL, 0x01400000);
+ temp = IGP_READ_MCIND(dev_priv, RS480_AGP_MODE_CNTL);
+ IGP_WRITE_MCIND(RS480_AGP_MODE_CNTL, ((1 << RS480_REQ_TYPE_SNOOP_SHIFT) |
+ RS480_REQ_TYPE_SNOOP_DIS));
- RS690_WRITE_MCIND(RS690_MC_AGP_BASE,
- (unsigned int)dev_priv->gart_vm_start);
+ radeon_write_agp_base(dev_priv, dev_priv->gart_vm_start);
dev_priv->gart_size = 32*1024*1024;
temp = (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) &
0xffff0000) | (dev_priv->gart_vm_start >> 16));
- RS690_WRITE_MCIND(RS690_MC_AGP_LOCATION, temp);
+ radeon_write_agp_location(dev_priv, temp);
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_AGP_SIZE);
- RS690_WRITE_MCIND(RS690_MC_AGP_SIZE,
- RS690_MC_GART_EN | RS690_MC_AGP_SIZE_32MB);
+ temp = IGP_READ_MCIND(dev_priv, RS480_AGP_ADDRESS_SPACE_SIZE);
+ IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, (RS480_GART_EN |
+ RS480_VA_SIZE_32MB));
do {
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_CACHE_CNTL);
- if ((temp & RS690_MC_GART_CLEAR_STATUS) ==
- RS690_MC_GART_CLEAR_DONE)
+ temp = IGP_READ_MCIND(dev_priv, RS480_GART_CACHE_CNTRL);
+ if ((temp & RS480_GART_CACHE_INVALIDATE) == 0)
break;
DRM_UDELAY(1);
} while (1);
- RS690_WRITE_MCIND(RS690_MC_GART_CACHE_CNTL,
- RS690_MC_GART_CC_CLEAR);
+ IGP_WRITE_MCIND(RS480_GART_CACHE_CNTRL,
+ RS480_GART_CACHE_INVALIDATE);
+
do {
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_CACHE_CNTL);
- if ((temp & RS690_MC_GART_CLEAR_STATUS) ==
- RS690_MC_GART_CLEAR_DONE)
+ temp = IGP_READ_MCIND(dev_priv, RS480_GART_CACHE_CNTRL);
+ if ((temp & RS480_GART_CACHE_INVALIDATE) == 0)
break;
DRM_UDELAY(1);
} while (1);
- RS690_WRITE_MCIND(RS690_MC_GART_CACHE_CNTL,
- RS690_MC_GART_CC_NO_CHANGE);
+ IGP_WRITE_MCIND(RS480_GART_CACHE_CNTRL, 0);
} else {
- RS690_WRITE_MCIND(RS690_MC_AGP_SIZE, RS690_MC_GART_DIS);
+ IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, 0);
}
}
@@ -1472,12 +813,8 @@
{
u32 tmp;
- if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) {
- radeon_set_rs690gart(dev_priv, on);
- return;
- }
-
- if (dev_priv->flags & RADEON_IS_IGPGART) {
+ if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) ||
+ (dev_priv->flags & RADEON_IS_IGPGART)) {
radeon_set_igpgart(dev_priv, on);
return;
}
@@ -1951,6 +1288,7 @@
radeon_cp_init_ring_buffer(dev, dev_priv);
radeon_do_engine_reset(dev);
+ radeon_enable_interrupt(dev);
DRM_DEBUG("radeon_do_resume_cp() complete\n");
diff --git a/drivers/char/drm/radeon_drm.h b/drivers/char/drm/radeon_drm.h
index aab82e1..73ff51f 100644
--- a/drivers/char/drm/radeon_drm.h
+++ b/drivers/char/drm/radeon_drm.h
@@ -240,6 +240,7 @@
# define R300_NEW_WAIT_2D_2D_CLEAN_3D_3D_CLEAN 0x8
#define R300_CMD_SCRATCH 8
+#define R300_CMD_R500FP 9
typedef union {
unsigned int u;
@@ -268,6 +269,9 @@
struct {
unsigned char cmd_type, reg, n_bufs, flags;
} scratch;
+ struct {
+ unsigned char cmd_type, count, adrlo, adrhi_flags;
+ } r500fp;
} drm_r300_cmd_header_t;
#define RADEON_FRONT 0x1
@@ -278,6 +282,9 @@
#define RADEON_USE_HIERZ 0x40000000
#define RADEON_USE_COMP_ZBUF 0x20000000
+#define R500FP_CONSTANT_TYPE (1 << 1)
+#define R500FP_CONSTANT_CLAMP (1 << 2)
+
/* Primitive types
*/
#define RADEON_POINTS 0x1
@@ -669,6 +676,7 @@
#define RADEON_PARAM_CARD_TYPE 12
#define RADEON_PARAM_VBLANK_CRTC 13 /* VBLANK CRTC */
#define RADEON_PARAM_FB_LOCATION 14 /* FB location */
+#define RADEON_PARAM_NUM_GB_PIPES 15 /* num GB pipes */
typedef struct drm_radeon_getparam {
int param;
diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h
index 173ae62..3f0eca9 100644
--- a/drivers/char/drm/radeon_drv.h
+++ b/drivers/char/drm/radeon_drv.h
@@ -38,7 +38,7 @@
#define DRIVER_NAME "radeon"
#define DRIVER_DESC "ATI Radeon"
-#define DRIVER_DATE "20060524"
+#define DRIVER_DATE "20080528"
/* Interface history:
*
@@ -98,9 +98,10 @@
* 1.26- Add support for variable size PCI(E) gart aperture
* 1.27- Add support for IGP GART
* 1.28- Add support for VBL on CRTC2
+ * 1.29- R500 3D cmd buffer support
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 28
+#define DRIVER_MINOR 29
#define DRIVER_PATCHLEVEL 0
/*
@@ -122,7 +123,7 @@
CHIP_RV380,
CHIP_R420,
CHIP_RV410,
- CHIP_RS400,
+ CHIP_RS480,
CHIP_RS690,
CHIP_RV515,
CHIP_R520,
@@ -294,6 +295,7 @@
int vblank_crtc;
uint32_t irq_enable_reg;
int irq_enabled;
+ uint32_t r500_disp_irq_reg;
struct radeon_surface surfaces[RADEON_MAX_SURFACES];
struct radeon_virt_surface virt_surfaces[2 * RADEON_MAX_SURFACES];
@@ -307,6 +309,8 @@
/* starting from here on, data is preserved accross an open */
uint32_t flags; /* see radeon_chip_flags */
unsigned long fb_aper_offset;
+
+ int num_gb_pipes;
} drm_radeon_private_t;
typedef struct drm_radeon_buf_priv {
@@ -382,6 +386,7 @@
extern void radeon_driver_irq_preinstall(struct drm_device * dev);
extern void radeon_driver_irq_postinstall(struct drm_device * dev);
extern void radeon_driver_irq_uninstall(struct drm_device * dev);
+extern void radeon_enable_interrupt(struct drm_device *dev);
extern int radeon_vblank_crtc_get(struct drm_device *dev);
extern int radeon_vblank_crtc_set(struct drm_device *dev, int64_t value);
@@ -444,13 +449,13 @@
#define RADEON_PCIE_DATA 0x0034
#define RADEON_PCIE_TX_GART_CNTL 0x10
# define RADEON_PCIE_TX_GART_EN (1 << 0)
-# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_PASS_THRU (0<<1)
-# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_CLAMP_LO (1<<1)
-# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD (3<<1)
-# define RADEON_PCIE_TX_GART_MODE_32_128_CACHE (0<<3)
-# define RADEON_PCIE_TX_GART_MODE_8_4_128_CACHE (1<<3)
-# define RADEON_PCIE_TX_GART_CHK_RW_VALID_EN (1<<5)
-# define RADEON_PCIE_TX_GART_INVALIDATE_TLB (1<<8)
+# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_PASS_THRU (0 << 1)
+# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_CLAMP_LO (1 << 1)
+# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD (3 << 1)
+# define RADEON_PCIE_TX_GART_MODE_32_128_CACHE (0 << 3)
+# define RADEON_PCIE_TX_GART_MODE_8_4_128_CACHE (1 << 3)
+# define RADEON_PCIE_TX_GART_CHK_RW_VALID_EN (1 << 5)
+# define RADEON_PCIE_TX_GART_INVALIDATE_TLB (1 << 8)
#define RADEON_PCIE_TX_DISCARD_RD_ADDR_LO 0x11
#define RADEON_PCIE_TX_DISCARD_RD_ADDR_HI 0x12
#define RADEON_PCIE_TX_GART_BASE 0x13
@@ -459,14 +464,9 @@
#define RADEON_PCIE_TX_GART_END_LO 0x16
#define RADEON_PCIE_TX_GART_END_HI 0x17
-#define RADEON_IGPGART_INDEX 0x168
-#define RADEON_IGPGART_DATA 0x16c
-#define RADEON_IGPGART_UNK_18 0x18
-#define RADEON_IGPGART_CTRL 0x2b
-#define RADEON_IGPGART_BASE_ADDR 0x2c
-#define RADEON_IGPGART_FLUSH 0x2e
-#define RADEON_IGPGART_ENABLE 0x38
-#define RADEON_IGPGART_UNK_39 0x39
+#define RS480_NB_MC_INDEX 0x168
+# define RS480_NB_MC_IND_WR_EN (1 << 8)
+#define RS480_NB_MC_DATA 0x16c
#define RS690_MC_INDEX 0x78
# define RS690_MC_INDEX_MASK 0x1ff
@@ -474,45 +474,91 @@
# define RS690_MC_INDEX_WR_ACK 0x7f
#define RS690_MC_DATA 0x7c
-#define RS690_MC_MISC_CNTL 0x18
-#define RS690_MC_GART_FEATURE_ID 0x2b
-#define RS690_MC_GART_BASE 0x2c
-#define RS690_MC_GART_CACHE_CNTL 0x2e
-# define RS690_MC_GART_CC_NO_CHANGE 0x0
-# define RS690_MC_GART_CC_CLEAR 0x1
-# define RS690_MC_GART_CLEAR_STATUS (1 << 1)
-# define RS690_MC_GART_CLEAR_DONE (0 << 1)
-# define RS690_MC_GART_CLEAR_PENDING (1 << 1)
-#define RS690_MC_AGP_SIZE 0x38
-# define RS690_MC_GART_DIS 0x0
-# define RS690_MC_GART_EN 0x1
-# define RS690_MC_AGP_SIZE_32MB (0 << 1)
-# define RS690_MC_AGP_SIZE_64MB (1 << 1)
-# define RS690_MC_AGP_SIZE_128MB (2 << 1)
-# define RS690_MC_AGP_SIZE_256MB (3 << 1)
-# define RS690_MC_AGP_SIZE_512MB (4 << 1)
-# define RS690_MC_AGP_SIZE_1GB (5 << 1)
-# define RS690_MC_AGP_SIZE_2GB (6 << 1)
-#define RS690_MC_AGP_MODE_CONTROL 0x39
+/* MC indirect registers */
+#define RS480_MC_MISC_CNTL 0x18
+# define RS480_DISABLE_GTW (1 << 1)
+/* switch between MCIND GART and MM GART registers. 0 = mmgart, 1 = mcind gart */
+# define RS480_GART_INDEX_REG_EN (1 << 12)
+# define RS690_BLOCK_GFX_D3_EN (1 << 14)
+#define RS480_K8_FB_LOCATION 0x1e
+#define RS480_GART_FEATURE_ID 0x2b
+# define RS480_HANG_EN (1 << 11)
+# define RS480_TLB_ENABLE (1 << 18)
+# define RS480_P2P_ENABLE (1 << 19)
+# define RS480_GTW_LAC_EN (1 << 25)
+# define RS480_2LEVEL_GART (0 << 30)
+# define RS480_1LEVEL_GART (1 << 30)
+# define RS480_PDC_EN (1 << 31)
+#define RS480_GART_BASE 0x2c
+#define RS480_GART_CACHE_CNTRL 0x2e
+# define RS480_GART_CACHE_INVALIDATE (1 << 0) /* wait for it to clear */
+#define RS480_AGP_ADDRESS_SPACE_SIZE 0x38
+# define RS480_GART_EN (1 << 0)
+# define RS480_VA_SIZE_32MB (0 << 1)
+# define RS480_VA_SIZE_64MB (1 << 1)
+# define RS480_VA_SIZE_128MB (2 << 1)
+# define RS480_VA_SIZE_256MB (3 << 1)
+# define RS480_VA_SIZE_512MB (4 << 1)
+# define RS480_VA_SIZE_1GB (5 << 1)
+# define RS480_VA_SIZE_2GB (6 << 1)
+#define RS480_AGP_MODE_CNTL 0x39
+# define RS480_POST_GART_Q_SIZE (1 << 18)
+# define RS480_NONGART_SNOOP (1 << 19)
+# define RS480_AGP_RD_BUF_SIZE (1 << 20)
+# define RS480_REQ_TYPE_SNOOP_SHIFT 22
+# define RS480_REQ_TYPE_SNOOP_MASK 0x3
+# define RS480_REQ_TYPE_SNOOP_DIS (1 << 24)
+#define RS480_MC_MISC_UMA_CNTL 0x5f
+#define RS480_MC_MCLK_CNTL 0x7a
+#define RS480_MC_UMA_DUALCH_CNTL 0x86
+
#define RS690_MC_FB_LOCATION 0x100
#define RS690_MC_AGP_LOCATION 0x101
#define RS690_MC_AGP_BASE 0x102
+#define RS690_MC_AGP_BASE_2 0x103
#define R520_MC_IND_INDEX 0x70
-#define R520_MC_IND_WR_EN (1<<24)
+#define R520_MC_IND_WR_EN (1 << 24)
#define R520_MC_IND_DATA 0x74
#define RV515_MC_FB_LOCATION 0x01
#define RV515_MC_AGP_LOCATION 0x02
+#define RV515_MC_AGP_BASE 0x03
+#define RV515_MC_AGP_BASE_2 0x04
#define R520_MC_FB_LOCATION 0x04
#define R520_MC_AGP_LOCATION 0x05
+#define R520_MC_AGP_BASE 0x06
+#define R520_MC_AGP_BASE_2 0x07
#define RADEON_MPP_TB_CONFIG 0x01c0
#define RADEON_MEM_CNTL 0x0140
#define RADEON_MEM_SDRAM_MODE_REG 0x0158
+#define RADEON_AGP_BASE_2 0x015c /* r200+ only */
+#define RS480_AGP_BASE_2 0x0164
#define RADEON_AGP_BASE 0x0170
+/* pipe config regs */
+#define R400_GB_PIPE_SELECT 0x402c
+#define R500_DYN_SCLK_PWMEM_PIPE 0x000d /* PLL */
+#define R500_SU_REG_DEST 0x42c8
+#define R300_GB_TILE_CONFIG 0x4018
+# define R300_ENABLE_TILING (1 << 0)
+# define R300_PIPE_COUNT_RV350 (0 << 1)
+# define R300_PIPE_COUNT_R300 (3 << 1)
+# define R300_PIPE_COUNT_R420_3P (6 << 1)
+# define R300_PIPE_COUNT_R420 (7 << 1)
+# define R300_TILE_SIZE_8 (0 << 4)
+# define R300_TILE_SIZE_16 (1 << 4)
+# define R300_TILE_SIZE_32 (2 << 4)
+# define R300_SUBPIXEL_1_12 (0 << 16)
+# define R300_SUBPIXEL_1_16 (1 << 16)
+#define R300_DST_PIPE_CONFIG 0x170c
+# define R300_PIPE_AUTO_CONFIG (1 << 31)
+#define R300_RB2D_DSTCACHE_MODE 0x3428
+# define R300_DC_AUTOFLUSH_ENABLE (1 << 8)
+# define R300_DC_DC_DISABLE_IGNORE_PE (1 << 17)
+
#define RADEON_RB3D_COLOROFFSET 0x1c40
#define RADEON_RB3D_COLORPITCH 0x1c48
@@ -616,11 +662,12 @@
#define RADEON_PP_TXFILTER_1 0x1c6c
#define RADEON_PP_TXFILTER_2 0x1c84
-#define RADEON_RB2D_DSTCACHE_CTLSTAT 0x342c
-# define RADEON_RB2D_DC_FLUSH (3 << 0)
-# define RADEON_RB2D_DC_FREE (3 << 2)
-# define RADEON_RB2D_DC_FLUSH_ALL 0xf
-# define RADEON_RB2D_DC_BUSY (1 << 31)
+#define R300_RB2D_DSTCACHE_CTLSTAT 0x342c /* use R300_DSTCACHE_CTLSTAT */
+#define R300_DSTCACHE_CTLSTAT 0x1714
+# define R300_RB2D_DC_FLUSH (3 << 0)
+# define R300_RB2D_DC_FREE (3 << 2)
+# define R300_RB2D_DC_FLUSH_ALL 0xf
+# define R300_RB2D_DC_BUSY (1 << 31)
#define RADEON_RB3D_CNTL 0x1c3c
# define RADEON_ALPHA_BLEND_ENABLE (1 << 0)
# define RADEON_PLANE_MASK_ENABLE (1 << 1)
@@ -643,11 +690,18 @@
# define RADEON_RB3D_ZC_FREE (1 << 2)
# define RADEON_RB3D_ZC_FLUSH_ALL 0x5
# define RADEON_RB3D_ZC_BUSY (1 << 31)
+#define R300_ZB_ZCACHE_CTLSTAT 0x4f18
+# define R300_ZC_FLUSH (1 << 0)
+# define R300_ZC_FREE (1 << 1)
+# define R300_ZC_FLUSH_ALL 0x3
+# define R300_ZC_BUSY (1 << 31)
#define RADEON_RB3D_DSTCACHE_CTLSTAT 0x325c
# define RADEON_RB3D_DC_FLUSH (3 << 0)
# define RADEON_RB3D_DC_FREE (3 << 2)
# define RADEON_RB3D_DC_FLUSH_ALL 0xf
# define RADEON_RB3D_DC_BUSY (1 << 31)
+#define R300_RB3D_DSTCACHE_CTLSTAT 0x4e4c
+# define R300_RB3D_DC_FINISH (1 << 4)
#define RADEON_RB3D_ZSTENCILCNTL 0x1c2c
# define RADEON_Z_TEST_MASK (7 << 4)
# define RADEON_Z_TEST_ALWAYS (7 << 4)
@@ -1057,6 +1111,31 @@
#define R200_VAP_PVS_CNTL_1 0x22D0
+#define R500_D1CRTC_STATUS 0x609c
+#define R500_D2CRTC_STATUS 0x689c
+#define R500_CRTC_V_BLANK (1<<0)
+
+#define R500_D1CRTC_FRAME_COUNT 0x60a4
+#define R500_D2CRTC_FRAME_COUNT 0x68a4
+
+#define R500_D1MODE_V_COUNTER 0x6530
+#define R500_D2MODE_V_COUNTER 0x6d30
+
+#define R500_D1MODE_VBLANK_STATUS 0x6534
+#define R500_D2MODE_VBLANK_STATUS 0x6d34
+#define R500_VBLANK_OCCURED (1<<0)
+#define R500_VBLANK_ACK (1<<4)
+#define R500_VBLANK_STAT (1<<12)
+#define R500_VBLANK_INT (1<<16)
+
+#define R500_DxMODE_INT_MASK 0x6540
+#define R500_D1MODE_INT_MASK (1<<0)
+#define R500_D2MODE_INT_MASK (1<<8)
+
+#define R500_DISP_INTERRUPT_STATUS 0x7edc
+#define R500_D1_VBLANK_INTERRUPT (1 << 4)
+#define R500_D2_VBLANK_INTERRUPT (1 << 5)
+
/* Constants */
#define RADEON_MAX_USEC_TIMEOUT 100000 /* 100 ms */
@@ -1078,42 +1157,50 @@
#define RADEON_READ8(reg) DRM_READ8( dev_priv->mmio, (reg) )
#define RADEON_WRITE8(reg,val) DRM_WRITE8( dev_priv->mmio, (reg), (val) )
-#define RADEON_WRITE_PLL( addr, val ) \
+#define RADEON_WRITE_PLL(addr, val) \
do { \
- RADEON_WRITE8( RADEON_CLOCK_CNTL_INDEX, \
+ RADEON_WRITE8(RADEON_CLOCK_CNTL_INDEX, \
((addr) & 0x1f) | RADEON_PLL_WR_EN ); \
- RADEON_WRITE( RADEON_CLOCK_CNTL_DATA, (val) ); \
+ RADEON_WRITE(RADEON_CLOCK_CNTL_DATA, (val)); \
} while (0)
-#define RADEON_WRITE_IGPGART( addr, val ) \
+#define RADEON_WRITE_PCIE(addr, val) \
do { \
- RADEON_WRITE( RADEON_IGPGART_INDEX, \
- ((addr) & 0x7f) | (1 << 8)); \
- RADEON_WRITE( RADEON_IGPGART_DATA, (val) ); \
- RADEON_WRITE( RADEON_IGPGART_INDEX, 0x7f ); \
-} while (0)
-
-#define RADEON_WRITE_PCIE( addr, val ) \
-do { \
- RADEON_WRITE8( RADEON_PCIE_INDEX, \
+ RADEON_WRITE8(RADEON_PCIE_INDEX, \
((addr) & 0xff)); \
- RADEON_WRITE( RADEON_PCIE_DATA, (val) ); \
+ RADEON_WRITE(RADEON_PCIE_DATA, (val)); \
} while (0)
-#define RADEON_WRITE_MCIND( addr, val ) \
- do { \
- RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff)); \
- RADEON_WRITE(R520_MC_IND_DATA, (val)); \
- RADEON_WRITE(R520_MC_IND_INDEX, 0); \
- } while (0)
+#define R500_WRITE_MCIND(addr, val) \
+do { \
+ RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff)); \
+ RADEON_WRITE(R520_MC_IND_DATA, (val)); \
+ RADEON_WRITE(R520_MC_IND_INDEX, 0); \
+} while (0)
-#define RS690_WRITE_MCIND( addr, val ) \
+#define RS480_WRITE_MCIND(addr, val) \
+do { \
+ RADEON_WRITE(RS480_NB_MC_INDEX, \
+ ((addr) & 0xff) | RS480_NB_MC_IND_WR_EN); \
+ RADEON_WRITE(RS480_NB_MC_DATA, (val)); \
+ RADEON_WRITE(RS480_NB_MC_INDEX, 0xff); \
+} while (0)
+
+#define RS690_WRITE_MCIND(addr, val) \
do { \
RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_WR_EN | ((addr) & RS690_MC_INDEX_MASK)); \
RADEON_WRITE(RS690_MC_DATA, val); \
RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_WR_ACK); \
} while (0)
+#define IGP_WRITE_MCIND(addr, val) \
+do { \
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) \
+ RS690_WRITE_MCIND(addr, val); \
+ else \
+ RS480_WRITE_MCIND(addr, val); \
+} while (0)
+
#define CP_PACKET0( reg, n ) \
(RADEON_CP_PACKET0 | ((n) << 16) | ((reg) >> 2))
#define CP_PACKET0_TABLE( reg, n ) \
@@ -1154,23 +1241,43 @@
} while (0)
#define RADEON_FLUSH_CACHE() do { \
- OUT_RING( CP_PACKET0( RADEON_RB3D_DSTCACHE_CTLSTAT, 0 ) ); \
- OUT_RING( RADEON_RB3D_DC_FLUSH ); \
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \
+ OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_DC_FLUSH); \
+ } else { \
+ OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_DC_FLUSH); \
+ } \
} while (0)
#define RADEON_PURGE_CACHE() do { \
- OUT_RING( CP_PACKET0( RADEON_RB3D_DSTCACHE_CTLSTAT, 0 ) ); \
- OUT_RING( RADEON_RB3D_DC_FLUSH_ALL ); \
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \
+ OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_DC_FLUSH_ALL); \
+ } else { \
+ OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_DC_FLUSH_ALL); \
+ } \
} while (0)
#define RADEON_FLUSH_ZCACHE() do { \
- OUT_RING( CP_PACKET0( RADEON_RB3D_ZCACHE_CTLSTAT, 0 ) ); \
- OUT_RING( RADEON_RB3D_ZC_FLUSH ); \
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \
+ OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_ZC_FLUSH); \
+ } else { \
+ OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0)); \
+ OUT_RING(R300_ZC_FLUSH); \
+ } \
} while (0)
#define RADEON_PURGE_ZCACHE() do { \
- OUT_RING( CP_PACKET0( RADEON_RB3D_ZCACHE_CTLSTAT, 0 ) ); \
- OUT_RING( RADEON_RB3D_ZC_FLUSH_ALL ); \
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \
+ OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_ZC_FLUSH_ALL); \
+ } else { \
+ OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \
+ OUT_RING(R300_ZC_FLUSH_ALL); \
+ } \
} while (0)
/* ================================================================
diff --git a/drivers/char/drm/radeon_irq.c b/drivers/char/drm/radeon_irq.c
index 009af38..ee40d19 100644
--- a/drivers/char/drm/radeon_irq.c
+++ b/drivers/char/drm/radeon_irq.c
@@ -234,7 +234,7 @@
return radeon_wait_irq(dev, irqwait->irq_seq);
}
-static void radeon_enable_interrupt(struct drm_device *dev)
+void radeon_enable_interrupt(struct drm_device *dev)
{
drm_radeon_private_t *dev_priv = (drm_radeon_private_t *) dev->dev_private;
diff --git a/drivers/char/drm/radeon_microcode.h b/drivers/char/drm/radeon_microcode.h
new file mode 100644
index 0000000..a348c9e
--- /dev/null
+++ b/drivers/char/drm/radeon_microcode.h
@@ -0,0 +1,1844 @@
+/*
+ * Copyright 2007 Advanced Micro Devices, Inc.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef RADEON_MICROCODE_H
+#define RADEON_MICROCODE_H
+
+/* production radeon ucode r1xx-r6xx */
+static const u32 R100_cp_microcode[][2] = {
+ { 0x21007000, 0000000000 },
+ { 0x20007000, 0000000000 },
+ { 0x000000b4, 0x00000004 },
+ { 0x000000b8, 0x00000004 },
+ { 0x6f5b4d4c, 0000000000 },
+ { 0x4c4c427f, 0000000000 },
+ { 0x5b568a92, 0000000000 },
+ { 0x4ca09c6d, 0000000000 },
+ { 0xad4c4c4c, 0000000000 },
+ { 0x4ce1af3d, 0000000000 },
+ { 0xd8afafaf, 0000000000 },
+ { 0xd64c4cdc, 0000000000 },
+ { 0x4cd10d10, 0000000000 },
+ { 0x000f0000, 0x00000016 },
+ { 0x362f242d, 0000000000 },
+ { 0x00000012, 0x00000004 },
+ { 0x000f0000, 0x00000016 },
+ { 0x362f282d, 0000000000 },
+ { 0x000380e7, 0x00000002 },
+ { 0x04002c97, 0x00000002 },
+ { 0x000f0001, 0x00000016 },
+ { 0x333a3730, 0000000000 },
+ { 0x000077ef, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x00000021, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00061000, 0x00000002 },
+ { 0x00000021, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00061000, 0x00000002 },
+ { 0x00000021, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00000017, 0x00000004 },
+ { 0x0003802b, 0x00000002 },
+ { 0x040067e0, 0x00000002 },
+ { 0x00000017, 0x00000004 },
+ { 0x000077e0, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x000037e1, 0x00000002 },
+ { 0x040067e1, 0x00000006 },
+ { 0x000077e0, 0x00000002 },
+ { 0x000077e1, 0x00000002 },
+ { 0x000077e1, 0x00000006 },
+ { 0xffffffff, 0000000000 },
+ { 0x10000000, 0000000000 },
+ { 0x0003802b, 0x00000002 },
+ { 0x040067e0, 0x00000006 },
+ { 0x00007675, 0x00000002 },
+ { 0x00007676, 0x00000002 },
+ { 0x00007677, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0003802c, 0x00000002 },
+ { 0x04002676, 0x00000002 },
+ { 0x00007677, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0000002f, 0x00000018 },
+ { 0x0000002f, 0x00000018 },
+ { 0000000000, 0x00000006 },
+ { 0x00000030, 0x00000018 },
+ { 0x00000030, 0x00000018 },
+ { 0000000000, 0x00000006 },
+ { 0x01605000, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x00098000, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x64c0603e, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00080000, 0x00000016 },
+ { 0000000000, 0000000000 },
+ { 0x0400251d, 0x00000002 },
+ { 0x00007580, 0x00000002 },
+ { 0x00067581, 0x00000002 },
+ { 0x04002580, 0x00000002 },
+ { 0x00067581, 0x00000002 },
+ { 0x00000049, 0x00000004 },
+ { 0x00005000, 0000000000 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x0000750e, 0x00000002 },
+ { 0x00019000, 0x00000002 },
+ { 0x00011055, 0x00000014 },
+ { 0x00000055, 0x00000012 },
+ { 0x0400250f, 0x00000002 },
+ { 0x0000504f, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00007565, 0x00000002 },
+ { 0x00007566, 0x00000002 },
+ { 0x00000058, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x01e655b4, 0x00000002 },
+ { 0x4401b0e4, 0x00000002 },
+ { 0x01c110e4, 0x00000002 },
+ { 0x26667066, 0x00000018 },
+ { 0x040c2565, 0x00000002 },
+ { 0x00000066, 0x00000018 },
+ { 0x04002564, 0x00000002 },
+ { 0x00007566, 0x00000002 },
+ { 0x0000005d, 0x00000004 },
+ { 0x00401069, 0x00000008 },
+ { 0x00101000, 0x00000002 },
+ { 0x000d80ff, 0x00000002 },
+ { 0x0080006c, 0x00000008 },
+ { 0x000f9000, 0x00000002 },
+ { 0x000e00ff, 0x00000002 },
+ { 0000000000, 0x00000006 },
+ { 0x0000008f, 0x00000018 },
+ { 0x0000005b, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00007576, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x00009000, 0x00000002 },
+ { 0x00041000, 0x00000002 },
+ { 0x0c00350e, 0x00000002 },
+ { 0x00049000, 0x00000002 },
+ { 0x00051000, 0x00000002 },
+ { 0x01e785f8, 0x00000002 },
+ { 0x00200000, 0x00000002 },
+ { 0x0060007e, 0x0000000c },
+ { 0x00007563, 0x00000002 },
+ { 0x006075f0, 0x00000021 },
+ { 0x20007073, 0x00000004 },
+ { 0x00005073, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00007576, 0x00000002 },
+ { 0x00007577, 0x00000002 },
+ { 0x0000750e, 0x00000002 },
+ { 0x0000750f, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00600083, 0x0000000c },
+ { 0x006075f0, 0x00000021 },
+ { 0x000075f8, 0x00000002 },
+ { 0x00000083, 0x00000004 },
+ { 0x000a750e, 0x00000002 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x0020750f, 0x00000002 },
+ { 0x00600086, 0x00000004 },
+ { 0x00007570, 0x00000002 },
+ { 0x00007571, 0x00000002 },
+ { 0x00007572, 0x00000006 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00005000, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00007568, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x00000095, 0x0000000c },
+ { 0x00058000, 0x00000002 },
+ { 0x0c607562, 0x00000002 },
+ { 0x00000097, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00600096, 0x00000004 },
+ { 0x400070e5, 0000000000 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x000380e5, 0x00000002 },
+ { 0x000000a8, 0x0000001c },
+ { 0x000650aa, 0x00000018 },
+ { 0x040025bb, 0x00000002 },
+ { 0x000610ab, 0x00000018 },
+ { 0x040075bc, 0000000000 },
+ { 0x000075bb, 0x00000002 },
+ { 0x000075bc, 0000000000 },
+ { 0x00090000, 0x00000006 },
+ { 0x00090000, 0x00000002 },
+ { 0x000d8002, 0x00000006 },
+ { 0x00007832, 0x00000002 },
+ { 0x00005000, 0x00000002 },
+ { 0x000380e7, 0x00000002 },
+ { 0x04002c97, 0x00000002 },
+ { 0x00007820, 0x00000002 },
+ { 0x00007821, 0x00000002 },
+ { 0x00007800, 0000000000 },
+ { 0x01200000, 0x00000002 },
+ { 0x20077000, 0x00000002 },
+ { 0x01200000, 0x00000002 },
+ { 0x20007000, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x0120751b, 0x00000002 },
+ { 0x8040750a, 0x00000002 },
+ { 0x8040750b, 0x00000002 },
+ { 0x00110000, 0x00000002 },
+ { 0x000380e5, 0x00000002 },
+ { 0x000000c6, 0x0000001c },
+ { 0x000610ab, 0x00000018 },
+ { 0x844075bd, 0x00000002 },
+ { 0x000610aa, 0x00000018 },
+ { 0x840075bb, 0x00000002 },
+ { 0x000610ab, 0x00000018 },
+ { 0x844075bc, 0x00000002 },
+ { 0x000000c9, 0x00000004 },
+ { 0x804075bd, 0x00000002 },
+ { 0x800075bb, 0x00000002 },
+ { 0x804075bc, 0x00000002 },
+ { 0x00108000, 0x00000002 },
+ { 0x01400000, 0x00000002 },
+ { 0x006000cd, 0x0000000c },
+ { 0x20c07000, 0x00000020 },
+ { 0x000000cf, 0x00000012 },
+ { 0x00800000, 0x00000006 },
+ { 0x0080751d, 0x00000006 },
+ { 0000000000, 0000000000 },
+ { 0x0000775c, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00661000, 0x00000002 },
+ { 0x0460275d, 0x00000020 },
+ { 0x00004000, 0000000000 },
+ { 0x01e00830, 0x00000002 },
+ { 0x21007000, 0000000000 },
+ { 0x6464614d, 0000000000 },
+ { 0x69687420, 0000000000 },
+ { 0x00000073, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x00005000, 0x00000002 },
+ { 0x000380d0, 0x00000002 },
+ { 0x040025e0, 0x00000002 },
+ { 0x000075e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000380e0, 0x00000002 },
+ { 0x04002394, 0x00000002 },
+ { 0x00005000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x00000008, 0000000000 },
+ { 0x00000004, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 R200_cp_microcode[][2] = {
+ { 0x21007000, 0000000000 },
+ { 0x20007000, 0000000000 },
+ { 0x000000bf, 0x00000004 },
+ { 0x000000c3, 0x00000004 },
+ { 0x7a685e5d, 0000000000 },
+ { 0x5d5d5588, 0000000000 },
+ { 0x68659197, 0000000000 },
+ { 0x5da19f78, 0000000000 },
+ { 0x5d5d5d5d, 0000000000 },
+ { 0x5dee5d50, 0000000000 },
+ { 0xf2acacac, 0000000000 },
+ { 0xe75df9e9, 0000000000 },
+ { 0xb1dd0e11, 0000000000 },
+ { 0xe2afafaf, 0000000000 },
+ { 0x000f0000, 0x00000016 },
+ { 0x452f232d, 0000000000 },
+ { 0x00000013, 0x00000004 },
+ { 0x000f0000, 0x00000016 },
+ { 0x452f272d, 0000000000 },
+ { 0x000f0001, 0x00000016 },
+ { 0x3e4d4a37, 0000000000 },
+ { 0x000077ef, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x00000020, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00061000, 0x00000002 },
+ { 0x00000020, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00061000, 0x00000002 },
+ { 0x00000020, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00000016, 0x00000004 },
+ { 0x0003802a, 0x00000002 },
+ { 0x040067e0, 0x00000002 },
+ { 0x00000016, 0x00000004 },
+ { 0x000077e0, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x000037e1, 0x00000002 },
+ { 0x040067e1, 0x00000006 },
+ { 0x000077e0, 0x00000002 },
+ { 0x000077e1, 0x00000002 },
+ { 0x000077e1, 0x00000006 },
+ { 0xffffffff, 0000000000 },
+ { 0x10000000, 0000000000 },
+ { 0x07f007f0, 0000000000 },
+ { 0x0003802a, 0x00000002 },
+ { 0x040067e0, 0x00000006 },
+ { 0x0003802c, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002743, 0x00000002 },
+ { 0x00007675, 0x00000002 },
+ { 0x00007676, 0x00000002 },
+ { 0x00007677, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0003802c, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002743, 0x00000002 },
+ { 0x00007676, 0x00000002 },
+ { 0x00007677, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0003802b, 0x00000002 },
+ { 0x04002676, 0x00000002 },
+ { 0x00007677, 0x00000002 },
+ { 0x0003802c, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002743, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0003802c, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002743, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0000002f, 0x00000018 },
+ { 0x0000002f, 0x00000018 },
+ { 0000000000, 0x00000006 },
+ { 0x00000037, 0x00000018 },
+ { 0x00000037, 0x00000018 },
+ { 0000000000, 0x00000006 },
+ { 0x01605000, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x00098000, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x64c06051, 0x00000004 },
+ { 0x00080000, 0x00000016 },
+ { 0000000000, 0000000000 },
+ { 0x0400251d, 0x00000002 },
+ { 0x00007580, 0x00000002 },
+ { 0x00067581, 0x00000002 },
+ { 0x04002580, 0x00000002 },
+ { 0x00067581, 0x00000002 },
+ { 0x0000005a, 0x00000004 },
+ { 0x00005000, 0000000000 },
+ { 0x00061000, 0x00000002 },
+ { 0x0000750e, 0x00000002 },
+ { 0x00019000, 0x00000002 },
+ { 0x00011064, 0x00000014 },
+ { 0x00000064, 0x00000012 },
+ { 0x0400250f, 0x00000002 },
+ { 0x0000505e, 0x00000004 },
+ { 0x00007565, 0x00000002 },
+ { 0x00007566, 0x00000002 },
+ { 0x00000065, 0x00000004 },
+ { 0x01e655b4, 0x00000002 },
+ { 0x4401b0f0, 0x00000002 },
+ { 0x01c110f0, 0x00000002 },
+ { 0x26667071, 0x00000018 },
+ { 0x040c2565, 0x00000002 },
+ { 0x00000071, 0x00000018 },
+ { 0x04002564, 0x00000002 },
+ { 0x00007566, 0x00000002 },
+ { 0x00000068, 0x00000004 },
+ { 0x00401074, 0x00000008 },
+ { 0x00101000, 0x00000002 },
+ { 0x000d80ff, 0x00000002 },
+ { 0x00800077, 0x00000008 },
+ { 0x000f9000, 0x00000002 },
+ { 0x000e00ff, 0x00000002 },
+ { 0000000000, 0x00000006 },
+ { 0x00000094, 0x00000018 },
+ { 0x00000068, 0x00000004 },
+ { 0x00007576, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x00009000, 0x00000002 },
+ { 0x00041000, 0x00000002 },
+ { 0x0c00350e, 0x00000002 },
+ { 0x00049000, 0x00000002 },
+ { 0x00051000, 0x00000002 },
+ { 0x01e785f8, 0x00000002 },
+ { 0x00200000, 0x00000002 },
+ { 0x00600087, 0x0000000c },
+ { 0x00007563, 0x00000002 },
+ { 0x006075f0, 0x00000021 },
+ { 0x2000707c, 0x00000004 },
+ { 0x0000507c, 0x00000004 },
+ { 0x00007576, 0x00000002 },
+ { 0x00007577, 0x00000002 },
+ { 0x0000750e, 0x00000002 },
+ { 0x0000750f, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x0060008a, 0x0000000c },
+ { 0x006075f0, 0x00000021 },
+ { 0x000075f8, 0x00000002 },
+ { 0x0000008a, 0x00000004 },
+ { 0x000a750e, 0x00000002 },
+ { 0x0020750f, 0x00000002 },
+ { 0x0060008d, 0x00000004 },
+ { 0x00007570, 0x00000002 },
+ { 0x00007571, 0x00000002 },
+ { 0x00007572, 0x00000006 },
+ { 0x00005000, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00007568, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x00000098, 0x0000000c },
+ { 0x00058000, 0x00000002 },
+ { 0x0c607562, 0x00000002 },
+ { 0x0000009a, 0x00000004 },
+ { 0x00600099, 0x00000004 },
+ { 0x400070f1, 0000000000 },
+ { 0x000380f1, 0x00000002 },
+ { 0x000000a7, 0x0000001c },
+ { 0x000650a9, 0x00000018 },
+ { 0x040025bb, 0x00000002 },
+ { 0x000610aa, 0x00000018 },
+ { 0x040075bc, 0000000000 },
+ { 0x000075bb, 0x00000002 },
+ { 0x000075bc, 0000000000 },
+ { 0x00090000, 0x00000006 },
+ { 0x00090000, 0x00000002 },
+ { 0x000d8002, 0x00000006 },
+ { 0x00005000, 0x00000002 },
+ { 0x00007821, 0x00000002 },
+ { 0x00007800, 0000000000 },
+ { 0x00007821, 0x00000002 },
+ { 0x00007800, 0000000000 },
+ { 0x01665000, 0x00000002 },
+ { 0x000a0000, 0x00000002 },
+ { 0x000671cc, 0x00000002 },
+ { 0x0286f1cd, 0x00000002 },
+ { 0x000000b7, 0x00000010 },
+ { 0x21007000, 0000000000 },
+ { 0x000000be, 0x0000001c },
+ { 0x00065000, 0x00000002 },
+ { 0x000a0000, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x000b0000, 0x00000002 },
+ { 0x38067000, 0x00000002 },
+ { 0x000a00ba, 0x00000004 },
+ { 0x20007000, 0000000000 },
+ { 0x01200000, 0x00000002 },
+ { 0x20077000, 0x00000002 },
+ { 0x01200000, 0x00000002 },
+ { 0x20007000, 0000000000 },
+ { 0x00061000, 0x00000002 },
+ { 0x0120751b, 0x00000002 },
+ { 0x8040750a, 0x00000002 },
+ { 0x8040750b, 0x00000002 },
+ { 0x00110000, 0x00000002 },
+ { 0x000380f1, 0x00000002 },
+ { 0x000000d1, 0x0000001c },
+ { 0x000610aa, 0x00000018 },
+ { 0x844075bd, 0x00000002 },
+ { 0x000610a9, 0x00000018 },
+ { 0x840075bb, 0x00000002 },
+ { 0x000610aa, 0x00000018 },
+ { 0x844075bc, 0x00000002 },
+ { 0x000000d4, 0x00000004 },
+ { 0x804075bd, 0x00000002 },
+ { 0x800075bb, 0x00000002 },
+ { 0x804075bc, 0x00000002 },
+ { 0x00108000, 0x00000002 },
+ { 0x01400000, 0x00000002 },
+ { 0x006000d8, 0x0000000c },
+ { 0x20c07000, 0x00000020 },
+ { 0x000000da, 0x00000012 },
+ { 0x00800000, 0x00000006 },
+ { 0x0080751d, 0x00000006 },
+ { 0x000025bb, 0x00000002 },
+ { 0x000040d4, 0x00000004 },
+ { 0x0000775c, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00661000, 0x00000002 },
+ { 0x0460275d, 0x00000020 },
+ { 0x00004000, 0000000000 },
+ { 0x00007999, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00661000, 0x00000002 },
+ { 0x0460299b, 0x00000020 },
+ { 0x00004000, 0000000000 },
+ { 0x01e00830, 0x00000002 },
+ { 0x21007000, 0000000000 },
+ { 0x00005000, 0x00000002 },
+ { 0x00038056, 0x00000002 },
+ { 0x040025e0, 0x00000002 },
+ { 0x000075e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000380ed, 0x00000002 },
+ { 0x04007394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000078c4, 0x00000002 },
+ { 0x000078c5, 0x00000002 },
+ { 0x000078c6, 0x00000002 },
+ { 0x00007924, 0x00000002 },
+ { 0x00007925, 0x00000002 },
+ { 0x00007926, 0x00000002 },
+ { 0x000000f2, 0x00000004 },
+ { 0x00007924, 0x00000002 },
+ { 0x00007925, 0x00000002 },
+ { 0x00007926, 0x00000002 },
+ { 0x000000f9, 0x00000004 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 R300_cp_microcode[][2] = {
+ { 0x4200e000, 0000000000 },
+ { 0x4000e000, 0000000000 },
+ { 0x000000ae, 0x00000008 },
+ { 0x000000b2, 0x00000008 },
+ { 0x67554b4a, 0000000000 },
+ { 0x4a4a4475, 0000000000 },
+ { 0x55527d83, 0000000000 },
+ { 0x4a8c8b65, 0000000000 },
+ { 0x4aef4af6, 0000000000 },
+ { 0x4ae14a4a, 0000000000 },
+ { 0xe4979797, 0000000000 },
+ { 0xdb4aebdd, 0000000000 },
+ { 0x9ccc4a4a, 0000000000 },
+ { 0xd1989898, 0000000000 },
+ { 0x4a0f9ad6, 0000000000 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000d0012, 0x00000038 },
+ { 0x0000e8b4, 0x00000004 },
+ { 0x000d0014, 0x00000038 },
+ { 0x0000e8b6, 0x00000004 },
+ { 0x000d0016, 0x00000038 },
+ { 0x0000e854, 0x00000004 },
+ { 0x000d0018, 0x00000038 },
+ { 0x0000e855, 0x00000004 },
+ { 0x000d001a, 0x00000038 },
+ { 0x0000e856, 0x00000004 },
+ { 0x000d001c, 0x00000038 },
+ { 0x0000e857, 0x00000004 },
+ { 0x000d001e, 0x00000038 },
+ { 0x0000e824, 0x00000004 },
+ { 0x000d0020, 0x00000038 },
+ { 0x0000e825, 0x00000004 },
+ { 0x000d0022, 0x00000038 },
+ { 0x0000e830, 0x00000004 },
+ { 0x000d0024, 0x00000038 },
+ { 0x0000f0c0, 0x00000004 },
+ { 0x000d0026, 0x00000038 },
+ { 0x0000f0c1, 0x00000004 },
+ { 0x000d0028, 0x00000038 },
+ { 0x0000f041, 0x00000004 },
+ { 0x000d002a, 0x00000038 },
+ { 0x0000f184, 0x00000004 },
+ { 0x000d002c, 0x00000038 },
+ { 0x0000f185, 0x00000004 },
+ { 0x000d002e, 0x00000038 },
+ { 0x0000f186, 0x00000004 },
+ { 0x000d0030, 0x00000038 },
+ { 0x0000f187, 0x00000004 },
+ { 0x000d0032, 0x00000038 },
+ { 0x0000f180, 0x00000004 },
+ { 0x000d0034, 0x00000038 },
+ { 0x0000f393, 0x00000004 },
+ { 0x000d0036, 0x00000038 },
+ { 0x0000f38a, 0x00000004 },
+ { 0x000d0038, 0x00000038 },
+ { 0x0000f38e, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000043, 0x00000018 },
+ { 0x00cce800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x0000003a, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x2000451d, 0x00000004 },
+ { 0x0000e580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x08004580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x00000047, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x00032000, 0x00000004 },
+ { 0x00022051, 0x00000028 },
+ { 0x00000051, 0x00000024 },
+ { 0x0800450f, 0x00000004 },
+ { 0x0000a04b, 0x00000008 },
+ { 0x0000e565, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000052, 0x00000008 },
+ { 0x03cca5b4, 0x00000004 },
+ { 0x05432000, 0x00000004 },
+ { 0x00022000, 0x00000004 },
+ { 0x4ccce05e, 0x00000030 },
+ { 0x08274565, 0x00000004 },
+ { 0x0000005e, 0x00000030 },
+ { 0x08004564, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000055, 0x00000008 },
+ { 0x00802061, 0x00000010 },
+ { 0x00202000, 0x00000004 },
+ { 0x001b00ff, 0x00000004 },
+ { 0x01000064, 0x00000010 },
+ { 0x001f2000, 0x00000004 },
+ { 0x001c00ff, 0x00000004 },
+ { 0000000000, 0x0000000c },
+ { 0x00000080, 0x00000030 },
+ { 0x00000055, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00012000, 0x00000004 },
+ { 0x00082000, 0x00000004 },
+ { 0x1800650e, 0x00000004 },
+ { 0x00092000, 0x00000004 },
+ { 0x000a2000, 0x00000004 },
+ { 0x000f0000, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x00000074, 0x00000018 },
+ { 0x0000e563, 0x00000004 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000069, 0x00000008 },
+ { 0x0000a069, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x0000e577, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x0000e50f, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000077, 0x00000018 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000077, 0x00000008 },
+ { 0x0014e50e, 0x00000004 },
+ { 0x0040e50f, 0x00000004 },
+ { 0x00c0007a, 0x00000008 },
+ { 0x0000e570, 0x00000004 },
+ { 0x0000e571, 0x00000004 },
+ { 0x0000e572, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x0000e568, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00000084, 0x00000018 },
+ { 0x000b0000, 0x00000004 },
+ { 0x18c0e562, 0x00000004 },
+ { 0x00000086, 0x00000008 },
+ { 0x00c00085, 0x00000008 },
+ { 0x000700e3, 0x00000004 },
+ { 0x00000092, 0x00000038 },
+ { 0x000ca094, 0x00000030 },
+ { 0x080045bb, 0x00000004 },
+ { 0x000c2095, 0x00000030 },
+ { 0x0800e5bc, 0000000000 },
+ { 0x0000e5bb, 0x00000004 },
+ { 0x0000e5bc, 0000000000 },
+ { 0x00120000, 0x0000000c },
+ { 0x00120000, 0x00000004 },
+ { 0x001b0002, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e800, 0000000000 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e82e, 0000000000 },
+ { 0x02cca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000ce1cc, 0x00000004 },
+ { 0x050de1cd, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x000000a4, 0x00000018 },
+ { 0x00c0a000, 0x00000004 },
+ { 0x000000a1, 0x00000008 },
+ { 0x000000a6, 0x00000020 },
+ { 0x4200e000, 0000000000 },
+ { 0x000000ad, 0x00000038 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00160000, 0x00000004 },
+ { 0x700ce000, 0x00000004 },
+ { 0x001400a9, 0x00000008 },
+ { 0x4000e000, 0000000000 },
+ { 0x02400000, 0x00000004 },
+ { 0x400ee000, 0x00000004 },
+ { 0x02400000, 0x00000004 },
+ { 0x4000e000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0240e51b, 0x00000004 },
+ { 0x0080e50a, 0x00000005 },
+ { 0x0080e50b, 0x00000005 },
+ { 0x00220000, 0x00000004 },
+ { 0x000700e3, 0x00000004 },
+ { 0x000000c0, 0x00000038 },
+ { 0x000c2095, 0x00000030 },
+ { 0x0880e5bd, 0x00000005 },
+ { 0x000c2094, 0x00000030 },
+ { 0x0800e5bb, 0x00000005 },
+ { 0x000c2095, 0x00000030 },
+ { 0x0880e5bc, 0x00000005 },
+ { 0x000000c3, 0x00000008 },
+ { 0x0080e5bd, 0x00000005 },
+ { 0x0000e5bb, 0x00000005 },
+ { 0x0080e5bc, 0x00000005 },
+ { 0x00210000, 0x00000004 },
+ { 0x02800000, 0x00000004 },
+ { 0x00c000c7, 0x00000018 },
+ { 0x4180e000, 0x00000040 },
+ { 0x000000c9, 0x00000024 },
+ { 0x01000000, 0x0000000c },
+ { 0x0100e51d, 0x0000000c },
+ { 0x000045bb, 0x00000004 },
+ { 0x000080c3, 0x00000008 },
+ { 0x0000f3ce, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053cf, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f3d2, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053d3, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f39d, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c0539e, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x03c00830, 0x00000004 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x200045e0, 0x00000004 },
+ { 0x0000e5e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000700e0, 0x00000004 },
+ { 0x0800e394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x0000e8c4, 0x00000004 },
+ { 0x0000e8c5, 0x00000004 },
+ { 0x0000e8c6, 0x00000004 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000e4, 0x00000008 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000eb, 0x00000008 },
+ { 0x02c02000, 0x00000004 },
+ { 0x00060000, 0x00000004 },
+ { 0x000000f3, 0x00000034 },
+ { 0x000000f0, 0x00000008 },
+ { 0x00008000, 0x00000004 },
+ { 0xc000e000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x001d0018, 0x00000004 },
+ { 0x001a0001, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0x0500a04a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 R420_cp_microcode[][2] = {
+ { 0x4200e000, 0000000000 },
+ { 0x4000e000, 0000000000 },
+ { 0x00000099, 0x00000008 },
+ { 0x0000009d, 0x00000008 },
+ { 0x4a554b4a, 0000000000 },
+ { 0x4a4a4467, 0000000000 },
+ { 0x55526f75, 0000000000 },
+ { 0x4a7e7d65, 0000000000 },
+ { 0xd9d3dff6, 0000000000 },
+ { 0x4ac54a4a, 0000000000 },
+ { 0xc8828282, 0000000000 },
+ { 0xbf4acfc1, 0000000000 },
+ { 0x87b04a4a, 0000000000 },
+ { 0xb5838383, 0000000000 },
+ { 0x4a0f85ba, 0000000000 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000d0012, 0x00000038 },
+ { 0x0000e8b4, 0x00000004 },
+ { 0x000d0014, 0x00000038 },
+ { 0x0000e8b6, 0x00000004 },
+ { 0x000d0016, 0x00000038 },
+ { 0x0000e854, 0x00000004 },
+ { 0x000d0018, 0x00000038 },
+ { 0x0000e855, 0x00000004 },
+ { 0x000d001a, 0x00000038 },
+ { 0x0000e856, 0x00000004 },
+ { 0x000d001c, 0x00000038 },
+ { 0x0000e857, 0x00000004 },
+ { 0x000d001e, 0x00000038 },
+ { 0x0000e824, 0x00000004 },
+ { 0x000d0020, 0x00000038 },
+ { 0x0000e825, 0x00000004 },
+ { 0x000d0022, 0x00000038 },
+ { 0x0000e830, 0x00000004 },
+ { 0x000d0024, 0x00000038 },
+ { 0x0000f0c0, 0x00000004 },
+ { 0x000d0026, 0x00000038 },
+ { 0x0000f0c1, 0x00000004 },
+ { 0x000d0028, 0x00000038 },
+ { 0x0000f041, 0x00000004 },
+ { 0x000d002a, 0x00000038 },
+ { 0x0000f184, 0x00000004 },
+ { 0x000d002c, 0x00000038 },
+ { 0x0000f185, 0x00000004 },
+ { 0x000d002e, 0x00000038 },
+ { 0x0000f186, 0x00000004 },
+ { 0x000d0030, 0x00000038 },
+ { 0x0000f187, 0x00000004 },
+ { 0x000d0032, 0x00000038 },
+ { 0x0000f180, 0x00000004 },
+ { 0x000d0034, 0x00000038 },
+ { 0x0000f393, 0x00000004 },
+ { 0x000d0036, 0x00000038 },
+ { 0x0000f38a, 0x00000004 },
+ { 0x000d0038, 0x00000038 },
+ { 0x0000f38e, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000043, 0x00000018 },
+ { 0x00cce800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x0000003a, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x2000451d, 0x00000004 },
+ { 0x0000e580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x08004580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x00000047, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x00032000, 0x00000004 },
+ { 0x00022051, 0x00000028 },
+ { 0x00000051, 0x00000024 },
+ { 0x0800450f, 0x00000004 },
+ { 0x0000a04b, 0x00000008 },
+ { 0x0000e565, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000052, 0x00000008 },
+ { 0x03cca5b4, 0x00000004 },
+ { 0x05432000, 0x00000004 },
+ { 0x00022000, 0x00000004 },
+ { 0x4ccce05e, 0x00000030 },
+ { 0x08274565, 0x00000004 },
+ { 0x0000005e, 0x00000030 },
+ { 0x08004564, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000055, 0x00000008 },
+ { 0x00802061, 0x00000010 },
+ { 0x00202000, 0x00000004 },
+ { 0x001b00ff, 0x00000004 },
+ { 0x01000064, 0x00000010 },
+ { 0x001f2000, 0x00000004 },
+ { 0x001c00ff, 0x00000004 },
+ { 0000000000, 0x0000000c },
+ { 0x00000072, 0x00000030 },
+ { 0x00000055, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x0000e577, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x0000e50f, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000069, 0x00000018 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000069, 0x00000008 },
+ { 0x0014e50e, 0x00000004 },
+ { 0x0040e50f, 0x00000004 },
+ { 0x00c0006c, 0x00000008 },
+ { 0x0000e570, 0x00000004 },
+ { 0x0000e571, 0x00000004 },
+ { 0x0000e572, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x0000e568, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00000076, 0x00000018 },
+ { 0x000b0000, 0x00000004 },
+ { 0x18c0e562, 0x00000004 },
+ { 0x00000078, 0x00000008 },
+ { 0x00c00077, 0x00000008 },
+ { 0x000700c7, 0x00000004 },
+ { 0x00000080, 0x00000038 },
+ { 0x0000e5bb, 0x00000004 },
+ { 0x0000e5bc, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e800, 0000000000 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e82e, 0000000000 },
+ { 0x02cca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000ce1cc, 0x00000004 },
+ { 0x050de1cd, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x0000008f, 0x00000018 },
+ { 0x00c0a000, 0x00000004 },
+ { 0x0000008c, 0x00000008 },
+ { 0x00000091, 0x00000020 },
+ { 0x4200e000, 0000000000 },
+ { 0x00000098, 0x00000038 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00160000, 0x00000004 },
+ { 0x700ce000, 0x00000004 },
+ { 0x00140094, 0x00000008 },
+ { 0x4000e000, 0000000000 },
+ { 0x02400000, 0x00000004 },
+ { 0x400ee000, 0x00000004 },
+ { 0x02400000, 0x00000004 },
+ { 0x4000e000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0240e51b, 0x00000004 },
+ { 0x0080e50a, 0x00000005 },
+ { 0x0080e50b, 0x00000005 },
+ { 0x00220000, 0x00000004 },
+ { 0x000700c7, 0x00000004 },
+ { 0x000000a4, 0x00000038 },
+ { 0x0080e5bd, 0x00000005 },
+ { 0x0000e5bb, 0x00000005 },
+ { 0x0080e5bc, 0x00000005 },
+ { 0x00210000, 0x00000004 },
+ { 0x02800000, 0x00000004 },
+ { 0x00c000ab, 0x00000018 },
+ { 0x4180e000, 0x00000040 },
+ { 0x000000ad, 0x00000024 },
+ { 0x01000000, 0x0000000c },
+ { 0x0100e51d, 0x0000000c },
+ { 0x000045bb, 0x00000004 },
+ { 0x000080a7, 0x00000008 },
+ { 0x0000f3ce, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053cf, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f3d2, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053d3, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f39d, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c0539e, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x03c00830, 0x00000004 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x200045e0, 0x00000004 },
+ { 0x0000e5e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000700c4, 0x00000004 },
+ { 0x0800e394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x0000e8c4, 0x00000004 },
+ { 0x0000e8c5, 0x00000004 },
+ { 0x0000e8c6, 0x00000004 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000c8, 0x00000008 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000cf, 0x00000008 },
+ { 0x02c02000, 0x00000004 },
+ { 0x00060000, 0x00000004 },
+ { 0x000000d7, 0x00000034 },
+ { 0x000000d4, 0x00000008 },
+ { 0x00008000, 0x00000004 },
+ { 0xc000e000, 0000000000 },
+ { 0x0000e1cc, 0x00000004 },
+ { 0x0500e1cd, 0x00000004 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000000de, 0x00000034 },
+ { 0x000000da, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x0019e1cc, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x0500a000, 0x00000004 },
+ { 0x080041cd, 0x00000004 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x001d0018, 0x00000004 },
+ { 0x001a0001, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0x0500a04a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 RS600_cp_microcode[][2] = {
+ { 0x4200e000, 0000000000 },
+ { 0x4000e000, 0000000000 },
+ { 0x000000a0, 0x00000008 },
+ { 0x000000a4, 0x00000008 },
+ { 0x4a554b4a, 0000000000 },
+ { 0x4a4a4467, 0000000000 },
+ { 0x55526f75, 0000000000 },
+ { 0x4a7e7d65, 0000000000 },
+ { 0x4ae74af6, 0000000000 },
+ { 0x4ad34a4a, 0000000000 },
+ { 0xd6898989, 0000000000 },
+ { 0xcd4addcf, 0000000000 },
+ { 0x8ebe4ae2, 0000000000 },
+ { 0xc38a8a8a, 0000000000 },
+ { 0x4a0f8cc8, 0000000000 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000d0012, 0x00000038 },
+ { 0x0000e8b4, 0x00000004 },
+ { 0x000d0014, 0x00000038 },
+ { 0x0000e8b6, 0x00000004 },
+ { 0x000d0016, 0x00000038 },
+ { 0x0000e854, 0x00000004 },
+ { 0x000d0018, 0x00000038 },
+ { 0x0000e855, 0x00000004 },
+ { 0x000d001a, 0x00000038 },
+ { 0x0000e856, 0x00000004 },
+ { 0x000d001c, 0x00000038 },
+ { 0x0000e857, 0x00000004 },
+ { 0x000d001e, 0x00000038 },
+ { 0x0000e824, 0x00000004 },
+ { 0x000d0020, 0x00000038 },
+ { 0x0000e825, 0x00000004 },
+ { 0x000d0022, 0x00000038 },
+ { 0x0000e830, 0x00000004 },
+ { 0x000d0024, 0x00000038 },
+ { 0x0000f0c0, 0x00000004 },
+ { 0x000d0026, 0x00000038 },
+ { 0x0000f0c1, 0x00000004 },
+ { 0x000d0028, 0x00000038 },
+ { 0x0000f041, 0x00000004 },
+ { 0x000d002a, 0x00000038 },
+ { 0x0000f184, 0x00000004 },
+ { 0x000d002c, 0x00000038 },
+ { 0x0000f185, 0x00000004 },
+ { 0x000d002e, 0x00000038 },
+ { 0x0000f186, 0x00000004 },
+ { 0x000d0030, 0x00000038 },
+ { 0x0000f187, 0x00000004 },
+ { 0x000d0032, 0x00000038 },
+ { 0x0000f180, 0x00000004 },
+ { 0x000d0034, 0x00000038 },
+ { 0x0000f393, 0x00000004 },
+ { 0x000d0036, 0x00000038 },
+ { 0x0000f38a, 0x00000004 },
+ { 0x000d0038, 0x00000038 },
+ { 0x0000f38e, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000043, 0x00000018 },
+ { 0x00cce800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x0000003a, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x2000451d, 0x00000004 },
+ { 0x0000e580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x08004580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x00000047, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x00032000, 0x00000004 },
+ { 0x00022051, 0x00000028 },
+ { 0x00000051, 0x00000024 },
+ { 0x0800450f, 0x00000004 },
+ { 0x0000a04b, 0x00000008 },
+ { 0x0000e565, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000052, 0x00000008 },
+ { 0x03cca5b4, 0x00000004 },
+ { 0x05432000, 0x00000004 },
+ { 0x00022000, 0x00000004 },
+ { 0x4ccce05e, 0x00000030 },
+ { 0x08274565, 0x00000004 },
+ { 0x0000005e, 0x00000030 },
+ { 0x08004564, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000055, 0x00000008 },
+ { 0x00802061, 0x00000010 },
+ { 0x00202000, 0x00000004 },
+ { 0x001b00ff, 0x00000004 },
+ { 0x01000064, 0x00000010 },
+ { 0x001f2000, 0x00000004 },
+ { 0x001c00ff, 0x00000004 },
+ { 0000000000, 0x0000000c },
+ { 0x00000072, 0x00000030 },
+ { 0x00000055, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x0000e577, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x0000e50f, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000069, 0x00000018 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000069, 0x00000008 },
+ { 0x0014e50e, 0x00000004 },
+ { 0x0040e50f, 0x00000004 },
+ { 0x00c0006c, 0x00000008 },
+ { 0x0000e570, 0x00000004 },
+ { 0x0000e571, 0x00000004 },
+ { 0x0000e572, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x0000e568, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00000076, 0x00000018 },
+ { 0x000b0000, 0x00000004 },
+ { 0x18c0e562, 0x00000004 },
+ { 0x00000078, 0x00000008 },
+ { 0x00c00077, 0x00000008 },
+ { 0x000700d5, 0x00000004 },
+ { 0x00000084, 0x00000038 },
+ { 0x000ca086, 0x00000030 },
+ { 0x080045bb, 0x00000004 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0800e5bc, 0000000000 },
+ { 0x0000e5bb, 0x00000004 },
+ { 0x0000e5bc, 0000000000 },
+ { 0x00120000, 0x0000000c },
+ { 0x00120000, 0x00000004 },
+ { 0x001b0002, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e800, 0000000000 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e82e, 0000000000 },
+ { 0x02cca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000ce1cc, 0x00000004 },
+ { 0x050de1cd, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x00000096, 0x00000018 },
+ { 0x00c0a000, 0x00000004 },
+ { 0x00000093, 0x00000008 },
+ { 0x00000098, 0x00000020 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000009f, 0x00000038 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00160000, 0x00000004 },
+ { 0x700ce000, 0x00000004 },
+ { 0x0014009b, 0x00000008 },
+ { 0x4000e000, 0000000000 },
+ { 0x02400000, 0x00000004 },
+ { 0x400ee000, 0x00000004 },
+ { 0x02400000, 0x00000004 },
+ { 0x4000e000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0240e51b, 0x00000004 },
+ { 0x0080e50a, 0x00000005 },
+ { 0x0080e50b, 0x00000005 },
+ { 0x00220000, 0x00000004 },
+ { 0x000700d5, 0x00000004 },
+ { 0x000000b2, 0x00000038 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0880e5bd, 0x00000005 },
+ { 0x000c2086, 0x00000030 },
+ { 0x0800e5bb, 0x00000005 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0880e5bc, 0x00000005 },
+ { 0x000000b5, 0x00000008 },
+ { 0x0080e5bd, 0x00000005 },
+ { 0x0000e5bb, 0x00000005 },
+ { 0x0080e5bc, 0x00000005 },
+ { 0x00210000, 0x00000004 },
+ { 0x02800000, 0x00000004 },
+ { 0x00c000b9, 0x00000018 },
+ { 0x4180e000, 0x00000040 },
+ { 0x000000bb, 0x00000024 },
+ { 0x01000000, 0x0000000c },
+ { 0x0100e51d, 0x0000000c },
+ { 0x000045bb, 0x00000004 },
+ { 0x000080b5, 0x00000008 },
+ { 0x0000f3ce, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053cf, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f3d2, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053d3, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f39d, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c0539e, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x03c00830, 0x00000004 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x200045e0, 0x00000004 },
+ { 0x0000e5e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000700d2, 0x00000004 },
+ { 0x0800e394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x0000e8c4, 0x00000004 },
+ { 0x0000e8c5, 0x00000004 },
+ { 0x0000e8c6, 0x00000004 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000d6, 0x00000008 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000dd, 0x00000008 },
+ { 0x00e00116, 0000000000 },
+ { 0x000700e1, 0x00000004 },
+ { 0x0800401c, 0x00000004 },
+ { 0x200050e7, 0x00000004 },
+ { 0x0000e01d, 0x00000004 },
+ { 0x000000e4, 0x00000008 },
+ { 0x02c02000, 0x00000004 },
+ { 0x00060000, 0x00000004 },
+ { 0x000000eb, 0x00000034 },
+ { 0x000000e8, 0x00000008 },
+ { 0x00008000, 0x00000004 },
+ { 0xc000e000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x001d0018, 0x00000004 },
+ { 0x001a0001, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0x0500a04a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 RS690_cp_microcode[][2] = {
+ { 0x000000dd, 0x00000008 },
+ { 0x000000df, 0x00000008 },
+ { 0x000000a0, 0x00000008 },
+ { 0x000000a4, 0x00000008 },
+ { 0x4a554b4a, 0000000000 },
+ { 0x4a4a4467, 0000000000 },
+ { 0x55526f75, 0000000000 },
+ { 0x4a7e7d65, 0000000000 },
+ { 0x4ad74af6, 0000000000 },
+ { 0x4ac94a4a, 0000000000 },
+ { 0xcc898989, 0000000000 },
+ { 0xc34ad3c5, 0000000000 },
+ { 0x8e4a4a4a, 0000000000 },
+ { 0x4a8a8a8a, 0000000000 },
+ { 0x4a0f8c4a, 0000000000 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000d0012, 0x00000038 },
+ { 0x0000e8b4, 0x00000004 },
+ { 0x000d0014, 0x00000038 },
+ { 0x0000e8b6, 0x00000004 },
+ { 0x000d0016, 0x00000038 },
+ { 0x0000e854, 0x00000004 },
+ { 0x000d0018, 0x00000038 },
+ { 0x0000e855, 0x00000004 },
+ { 0x000d001a, 0x00000038 },
+ { 0x0000e856, 0x00000004 },
+ { 0x000d001c, 0x00000038 },
+ { 0x0000e857, 0x00000004 },
+ { 0x000d001e, 0x00000038 },
+ { 0x0000e824, 0x00000004 },
+ { 0x000d0020, 0x00000038 },
+ { 0x0000e825, 0x00000004 },
+ { 0x000d0022, 0x00000038 },
+ { 0x0000e830, 0x00000004 },
+ { 0x000d0024, 0x00000038 },
+ { 0x0000f0c0, 0x00000004 },
+ { 0x000d0026, 0x00000038 },
+ { 0x0000f0c1, 0x00000004 },
+ { 0x000d0028, 0x00000038 },
+ { 0x0000f041, 0x00000004 },
+ { 0x000d002a, 0x00000038 },
+ { 0x0000f184, 0x00000004 },
+ { 0x000d002c, 0x00000038 },
+ { 0x0000f185, 0x00000004 },
+ { 0x000d002e, 0x00000038 },
+ { 0x0000f186, 0x00000004 },
+ { 0x000d0030, 0x00000038 },
+ { 0x0000f187, 0x00000004 },
+ { 0x000d0032, 0x00000038 },
+ { 0x0000f180, 0x00000004 },
+ { 0x000d0034, 0x00000038 },
+ { 0x0000f393, 0x00000004 },
+ { 0x000d0036, 0x00000038 },
+ { 0x0000f38a, 0x00000004 },
+ { 0x000d0038, 0x00000038 },
+ { 0x0000f38e, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000043, 0x00000018 },
+ { 0x00cce800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x0000003a, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x2000451d, 0x00000004 },
+ { 0x0000e580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x08004580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x00000047, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x00032000, 0x00000004 },
+ { 0x00022051, 0x00000028 },
+ { 0x00000051, 0x00000024 },
+ { 0x0800450f, 0x00000004 },
+ { 0x0000a04b, 0x00000008 },
+ { 0x0000e565, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000052, 0x00000008 },
+ { 0x03cca5b4, 0x00000004 },
+ { 0x05432000, 0x00000004 },
+ { 0x00022000, 0x00000004 },
+ { 0x4ccce05e, 0x00000030 },
+ { 0x08274565, 0x00000004 },
+ { 0x0000005e, 0x00000030 },
+ { 0x08004564, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000055, 0x00000008 },
+ { 0x00802061, 0x00000010 },
+ { 0x00202000, 0x00000004 },
+ { 0x001b00ff, 0x00000004 },
+ { 0x01000064, 0x00000010 },
+ { 0x001f2000, 0x00000004 },
+ { 0x001c00ff, 0x00000004 },
+ { 0000000000, 0x0000000c },
+ { 0x00000072, 0x00000030 },
+ { 0x00000055, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x0000e577, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x0000e50f, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000069, 0x00000018 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000069, 0x00000008 },
+ { 0x0014e50e, 0x00000004 },
+ { 0x0040e50f, 0x00000004 },
+ { 0x00c0006c, 0x00000008 },
+ { 0x0000e570, 0x00000004 },
+ { 0x0000e571, 0x00000004 },
+ { 0x0000e572, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x0000e568, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00000076, 0x00000018 },
+ { 0x000b0000, 0x00000004 },
+ { 0x18c0e562, 0x00000004 },
+ { 0x00000078, 0x00000008 },
+ { 0x00c00077, 0x00000008 },
+ { 0x000700cb, 0x00000004 },
+ { 0x00000084, 0x00000038 },
+ { 0x000ca086, 0x00000030 },
+ { 0x080045bb, 0x00000004 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0800e5bc, 0000000000 },
+ { 0x0000e5bb, 0x00000004 },
+ { 0x0000e5bc, 0000000000 },
+ { 0x00120000, 0x0000000c },
+ { 0x00120000, 0x00000004 },
+ { 0x001b0002, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e800, 0000000000 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e82e, 0000000000 },
+ { 0x02cca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000ce1cc, 0x00000004 },
+ { 0x050de1cd, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x00000096, 0x00000018 },
+ { 0x00c0a000, 0x00000004 },
+ { 0x00000093, 0x00000008 },
+ { 0x00000098, 0x00000020 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000009f, 0x00000038 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00160000, 0x00000004 },
+ { 0x700ce000, 0x00000004 },
+ { 0x0014009b, 0x00000008 },
+ { 0x4000e000, 0000000000 },
+ { 0x02400000, 0x00000004 },
+ { 0x400ee000, 0x00000004 },
+ { 0x02400000, 0x00000004 },
+ { 0x4000e000, 0000000000 },
+ { 0x00100000, 0x0000002c },
+ { 0x00004000, 0000000000 },
+ { 0x080045c8, 0x00000004 },
+ { 0x00240005, 0x00000004 },
+ { 0x08004d0b, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0240e51b, 0x00000004 },
+ { 0x0080e50a, 0x00000005 },
+ { 0x0080e50b, 0x00000005 },
+ { 0x00220000, 0x00000004 },
+ { 0x000700cb, 0x00000004 },
+ { 0x000000b7, 0x00000038 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0880e5bd, 0x00000005 },
+ { 0x000c2086, 0x00000030 },
+ { 0x0800e5bb, 0x00000005 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0880e5bc, 0x00000005 },
+ { 0x000000ba, 0x00000008 },
+ { 0x0080e5bd, 0x00000005 },
+ { 0x0000e5bb, 0x00000005 },
+ { 0x0080e5bc, 0x00000005 },
+ { 0x00210000, 0x00000004 },
+ { 0x02800000, 0x00000004 },
+ { 0x00c000be, 0x00000018 },
+ { 0x4180e000, 0x00000040 },
+ { 0x000000c0, 0x00000024 },
+ { 0x01000000, 0x0000000c },
+ { 0x0100e51d, 0x0000000c },
+ { 0x000045bb, 0x00000004 },
+ { 0x000080ba, 0x00000008 },
+ { 0x03c00830, 0x00000004 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x200045e0, 0x00000004 },
+ { 0x0000e5e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000700c8, 0x00000004 },
+ { 0x0800e394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x0000e8c4, 0x00000004 },
+ { 0x0000e8c5, 0x00000004 },
+ { 0x0000e8c6, 0x00000004 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000cc, 0x00000008 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000d3, 0x00000008 },
+ { 0x02c02000, 0x00000004 },
+ { 0x00060000, 0x00000004 },
+ { 0x000000db, 0x00000034 },
+ { 0x000000d8, 0x00000008 },
+ { 0x00008000, 0x00000004 },
+ { 0xc000e000, 0000000000 },
+ { 0x000000e1, 0x00000030 },
+ { 0x4200e000, 0000000000 },
+ { 0x000000e1, 0x00000030 },
+ { 0x4000e000, 0000000000 },
+ { 0x0025001b, 0x00000004 },
+ { 0x00230000, 0x00000004 },
+ { 0x00250005, 0x00000004 },
+ { 0x000000e6, 0x00000034 },
+ { 0000000000, 0x0000000c },
+ { 0x00244000, 0x00000004 },
+ { 0x080045c8, 0x00000004 },
+ { 0x00240005, 0x00000004 },
+ { 0x08004d0b, 0x0000000c },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x001d0018, 0x00000004 },
+ { 0x001a0001, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0x0500a04a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 R520_cp_microcode[][2] = {
+ { 0x4200e000, 0000000000 },
+ { 0x4000e000, 0000000000 },
+ { 0x00000099, 0x00000008 },
+ { 0x0000009d, 0x00000008 },
+ { 0x4a554b4a, 0000000000 },
+ { 0x4a4a4467, 0000000000 },
+ { 0x55526f75, 0000000000 },
+ { 0x4a7e7d65, 0000000000 },
+ { 0xe0dae6f6, 0000000000 },
+ { 0x4ac54a4a, 0000000000 },
+ { 0xc8828282, 0000000000 },
+ { 0xbf4acfc1, 0000000000 },
+ { 0x87b04ad5, 0000000000 },
+ { 0xb5838383, 0000000000 },
+ { 0x4a0f85ba, 0000000000 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000d0012, 0x00000038 },
+ { 0x0000e8b4, 0x00000004 },
+ { 0x000d0014, 0x00000038 },
+ { 0x0000e8b6, 0x00000004 },
+ { 0x000d0016, 0x00000038 },
+ { 0x0000e854, 0x00000004 },
+ { 0x000d0018, 0x00000038 },
+ { 0x0000e855, 0x00000004 },
+ { 0x000d001a, 0x00000038 },
+ { 0x0000e856, 0x00000004 },
+ { 0x000d001c, 0x00000038 },
+ { 0x0000e857, 0x00000004 },
+ { 0x000d001e, 0x00000038 },
+ { 0x0000e824, 0x00000004 },
+ { 0x000d0020, 0x00000038 },
+ { 0x0000e825, 0x00000004 },
+ { 0x000d0022, 0x00000038 },
+ { 0x0000e830, 0x00000004 },
+ { 0x000d0024, 0x00000038 },
+ { 0x0000f0c0, 0x00000004 },
+ { 0x000d0026, 0x00000038 },
+ { 0x0000f0c1, 0x00000004 },
+ { 0x000d0028, 0x00000038 },
+ { 0x0000e000, 0x00000004 },
+ { 0x000d002a, 0x00000038 },
+ { 0x0000e000, 0x00000004 },
+ { 0x000d002c, 0x00000038 },
+ { 0x0000e000, 0x00000004 },
+ { 0x000d002e, 0x00000038 },
+ { 0x0000e000, 0x00000004 },
+ { 0x000d0030, 0x00000038 },
+ { 0x0000e000, 0x00000004 },
+ { 0x000d0032, 0x00000038 },
+ { 0x0000f180, 0x00000004 },
+ { 0x000d0034, 0x00000038 },
+ { 0x0000f393, 0x00000004 },
+ { 0x000d0036, 0x00000038 },
+ { 0x0000f38a, 0x00000004 },
+ { 0x000d0038, 0x00000038 },
+ { 0x0000f38e, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000043, 0x00000018 },
+ { 0x00cce800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x0000003a, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x2000451d, 0x00000004 },
+ { 0x0000e580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x08004580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x00000047, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x00032000, 0x00000004 },
+ { 0x00022051, 0x00000028 },
+ { 0x00000051, 0x00000024 },
+ { 0x0800450f, 0x00000004 },
+ { 0x0000a04b, 0x00000008 },
+ { 0x0000e565, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000052, 0x00000008 },
+ { 0x03cca5b4, 0x00000004 },
+ { 0x05432000, 0x00000004 },
+ { 0x00022000, 0x00000004 },
+ { 0x4ccce05e, 0x00000030 },
+ { 0x08274565, 0x00000004 },
+ { 0x0000005e, 0x00000030 },
+ { 0x08004564, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000055, 0x00000008 },
+ { 0x00802061, 0x00000010 },
+ { 0x00202000, 0x00000004 },
+ { 0x001b00ff, 0x00000004 },
+ { 0x01000064, 0x00000010 },
+ { 0x001f2000, 0x00000004 },
+ { 0x001c00ff, 0x00000004 },
+ { 0000000000, 0x0000000c },
+ { 0x00000072, 0x00000030 },
+ { 0x00000055, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x0000e577, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x0000e50f, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000069, 0x00000018 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000069, 0x00000008 },
+ { 0x0014e50e, 0x00000004 },
+ { 0x0040e50f, 0x00000004 },
+ { 0x00c0006c, 0x00000008 },
+ { 0x0000e570, 0x00000004 },
+ { 0x0000e571, 0x00000004 },
+ { 0x0000e572, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x0000e568, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00000076, 0x00000018 },
+ { 0x000b0000, 0x00000004 },
+ { 0x18c0e562, 0x00000004 },
+ { 0x00000078, 0x00000008 },
+ { 0x00c00077, 0x00000008 },
+ { 0x000700c7, 0x00000004 },
+ { 0x00000080, 0x00000038 },
+ { 0x0000e5bb, 0x00000004 },
+ { 0x0000e5bc, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e800, 0000000000 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e82e, 0000000000 },
+ { 0x02cca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000ce1cc, 0x00000004 },
+ { 0x050de1cd, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x0000008f, 0x00000018 },
+ { 0x00c0a000, 0x00000004 },
+ { 0x0000008c, 0x00000008 },
+ { 0x00000091, 0x00000020 },
+ { 0x4200e000, 0000000000 },
+ { 0x00000098, 0x00000038 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00160000, 0x00000004 },
+ { 0x700ce000, 0x00000004 },
+ { 0x00140094, 0x00000008 },
+ { 0x4000e000, 0000000000 },
+ { 0x02400000, 0x00000004 },
+ { 0x400ee000, 0x00000004 },
+ { 0x02400000, 0x00000004 },
+ { 0x4000e000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0240e51b, 0x00000004 },
+ { 0x0080e50a, 0x00000005 },
+ { 0x0080e50b, 0x00000005 },
+ { 0x00220000, 0x00000004 },
+ { 0x000700c7, 0x00000004 },
+ { 0x000000a4, 0x00000038 },
+ { 0x0080e5bd, 0x00000005 },
+ { 0x0000e5bb, 0x00000005 },
+ { 0x0080e5bc, 0x00000005 },
+ { 0x00210000, 0x00000004 },
+ { 0x02800000, 0x00000004 },
+ { 0x00c000ab, 0x00000018 },
+ { 0x4180e000, 0x00000040 },
+ { 0x000000ad, 0x00000024 },
+ { 0x01000000, 0x0000000c },
+ { 0x0100e51d, 0x0000000c },
+ { 0x000045bb, 0x00000004 },
+ { 0x000080a7, 0x00000008 },
+ { 0x0000f3ce, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053cf, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f3d2, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053d3, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f39d, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c0539e, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x03c00830, 0x00000004 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x200045e0, 0x00000004 },
+ { 0x0000e5e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000700c4, 0x00000004 },
+ { 0x0800e394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x0000e8c4, 0x00000004 },
+ { 0x0000e8c5, 0x00000004 },
+ { 0x0000e8c6, 0x00000004 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000c8, 0x00000008 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000cf, 0x00000008 },
+ { 0xdeadbeef, 0000000000 },
+ { 0x00000116, 0000000000 },
+ { 0x000700d3, 0x00000004 },
+ { 0x080050e7, 0x00000004 },
+ { 0x000700d4, 0x00000004 },
+ { 0x0800401c, 0x00000004 },
+ { 0x0000e01d, 0000000000 },
+ { 0x02c02000, 0x00000004 },
+ { 0x00060000, 0x00000004 },
+ { 0x000000de, 0x00000034 },
+ { 0x000000db, 0x00000008 },
+ { 0x00008000, 0x00000004 },
+ { 0xc000e000, 0000000000 },
+ { 0x0000e1cc, 0x00000004 },
+ { 0x0500e1cd, 0x00000004 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000000e5, 0x00000034 },
+ { 0x000000e1, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x0019e1cc, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x0500a000, 0x00000004 },
+ { 0x080041cd, 0x00000004 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x001d0018, 0x00000004 },
+ { 0x001a0001, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0x0500a04a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+
+#endif
diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c
index 6f75512..11c146b 100644
--- a/drivers/char/drm/radeon_state.c
+++ b/drivers/char/drm/radeon_state.c
@@ -1662,7 +1662,7 @@
u32 height;
int i;
u32 texpitch, microtile;
- u32 offset;
+ u32 offset, byte_offset;
RING_LOCALS;
if (radeon_check_and_fixup_offset(dev_priv, file_priv, &tex->offset)) {
@@ -1727,6 +1727,13 @@
} else
microtile = 0;
+ /* this might fail for zero-sized uploads - are those illegal? */
+ if (!radeon_check_offset(dev_priv, tex->offset + image->height *
+ blit_width - 1)) {
+ DRM_ERROR("Invalid final destination offset\n");
+ return -EINVAL;
+ }
+
DRM_DEBUG("tex=%dx%d blit=%d\n", tex_width, tex->height, blit_width);
do {
@@ -1840,6 +1847,7 @@
}
#undef RADEON_COPY_MT
+ byte_offset = (image->y & ~2047) * blit_width;
buf->file_priv = file_priv;
buf->used = size;
offset = dev_priv->gart_buffers_offset + buf->offset;
@@ -1854,9 +1862,9 @@
RADEON_DP_SRC_SOURCE_MEMORY |
RADEON_GMC_CLR_CMP_CNTL_DIS | RADEON_GMC_WR_MSK_DIS);
OUT_RING((spitch << 22) | (offset >> 10));
- OUT_RING((texpitch << 22) | (tex->offset >> 10));
+ OUT_RING((texpitch << 22) | ((tex->offset >> 10) + (byte_offset >> 10)));
OUT_RING(0);
- OUT_RING((image->x << 16) | image->y);
+ OUT_RING((image->x << 16) | (image->y % 2048));
OUT_RING((image->width << 16) | height);
RADEON_WAIT_UNTIL_2D_IDLE();
ADVANCE_RING();
@@ -3037,6 +3045,9 @@
case RADEON_PARAM_FB_LOCATION:
value = radeon_read_fb_location(dev_priv);
break;
+ case RADEON_PARAM_NUM_GB_PIPES:
+ value = dev_priv->num_gb_pipes;
+ break;
default:
DRM_DEBUG("Invalid parameter %d\n", param->param);
return -EINVAL;
diff --git a/drivers/char/generic_nvram.c b/drivers/char/generic_nvram.c
index 2398e86..a00869c 100644
--- a/drivers/char/generic_nvram.c
+++ b/drivers/char/generic_nvram.c
@@ -133,7 +133,7 @@
int __init nvram_init(void)
{
- printk(KERN_INFO "Macintosh non-volatile memory driver v%s\n",
+ printk(KERN_INFO "Generic non-volatile memory driver v%s\n",
NVRAM_VERSION);
return misc_register(&nvram_dev);
}
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 8d6c208..efd0b4d 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -112,3 +112,12 @@
If unsure, say Y.
+config HW_RANDOM_VIRTIO
+ tristate "VirtIO Random Number Generator support"
+ depends on HW_RANDOM && VIRTIO
+ ---help---
+ This driver provides kernel-side support for the virtual Random Number
+ Generator hardware.
+
+ To compile this driver as a module, choose M here: the
+ module will be called virtio-rng. If unsure, say N.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index c8b7300..b4940dd 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -11,3 +11,4 @@
obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o
obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
+obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c
index 5cc651e..27fdc08 100644
--- a/drivers/char/hw_random/intel-rng.c
+++ b/drivers/char/hw_random/intel-rng.c
@@ -273,7 +273,7 @@
if (mfc != INTEL_FWH_MANUFACTURER_CODE ||
(dvc != INTEL_FWH_DEVICE_CODE_8M &&
dvc != INTEL_FWH_DEVICE_CODE_4M)) {
- printk(KERN_ERR PFX "FWH not detected\n");
+ printk(KERN_NOTICE PFX "FWH not detected\n");
return -ENODEV;
}
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
new file mode 100644
index 0000000..d0e563e
--- /dev/null
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -0,0 +1,155 @@
+/*
+ * Randomness driver for virtio
+ * Copyright (C) 2007, 2008 Rusty Russell IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/err.h>
+#include <linux/hw_random.h>
+#include <linux/scatterlist.h>
+#include <linux/spinlock.h>
+#include <linux/virtio.h>
+#include <linux/virtio_rng.h>
+
+/* The host will fill any buffer we give it with sweet, sweet randomness. We
+ * give it 64 bytes at a time, and the hwrng framework takes it 4 bytes at a
+ * time. */
+#define RANDOM_DATA_SIZE 64
+
+static struct virtqueue *vq;
+static u32 *random_data;
+static unsigned int data_left;
+static DECLARE_COMPLETION(have_data);
+
+static void random_recv_done(struct virtqueue *vq)
+{
+ int len;
+
+ /* We never get spurious callbacks. */
+ if (!vq->vq_ops->get_buf(vq, &len))
+ BUG();
+
+ data_left = len / sizeof(random_data[0]);
+ complete(&have_data);
+}
+
+static void register_buffer(void)
+{
+ struct scatterlist sg;
+
+ sg_init_one(&sg, random_data, RANDOM_DATA_SIZE);
+ /* There should always be room for one buffer. */
+ if (vq->vq_ops->add_buf(vq, &sg, 0, 1, random_data) != 0)
+ BUG();
+ vq->vq_ops->kick(vq);
+}
+
+/* At least we don't udelay() in a loop like some other drivers. */
+static int virtio_data_present(struct hwrng *rng, int wait)
+{
+ if (data_left)
+ return 1;
+
+ if (!wait)
+ return 0;
+
+ wait_for_completion(&have_data);
+ return 1;
+}
+
+/* virtio_data_present() must have succeeded before this is called. */
+static int virtio_data_read(struct hwrng *rng, u32 *data)
+{
+ BUG_ON(!data_left);
+
+ *data = random_data[--data_left];
+
+ if (!data_left) {
+ init_completion(&have_data);
+ register_buffer();
+ }
+ return sizeof(*data);
+}
+
+static struct hwrng virtio_hwrng = {
+ .name = "virtio",
+ .data_present = virtio_data_present,
+ .data_read = virtio_data_read,
+};
+
+static int virtrng_probe(struct virtio_device *vdev)
+{
+ int err;
+
+ /* We expect a single virtqueue. */
+ vq = vdev->config->find_vq(vdev, 0, random_recv_done);
+ if (IS_ERR(vq))
+ return PTR_ERR(vq);
+
+ err = hwrng_register(&virtio_hwrng);
+ if (err) {
+ vdev->config->del_vq(vq);
+ return err;
+ }
+
+ register_buffer();
+ return 0;
+}
+
+static void virtrng_remove(struct virtio_device *vdev)
+{
+ vdev->config->reset(vdev);
+ hwrng_unregister(&virtio_hwrng);
+ vdev->config->del_vq(vq);
+}
+
+static struct virtio_device_id id_table[] = {
+ { VIRTIO_ID_RNG, VIRTIO_DEV_ANY_ID },
+ { 0 },
+};
+
+static struct virtio_driver virtio_rng = {
+ .driver.name = KBUILD_MODNAME,
+ .driver.owner = THIS_MODULE,
+ .id_table = id_table,
+ .probe = virtrng_probe,
+ .remove = __devexit_p(virtrng_remove),
+};
+
+static int __init init(void)
+{
+ int err;
+
+ random_data = kmalloc(RANDOM_DATA_SIZE, GFP_KERNEL);
+ if (!random_data)
+ return -ENOMEM;
+
+ err = register_virtio_driver(&virtio_rng);
+ if (err)
+ kfree(random_data);
+ return err;
+}
+
+static void __exit fini(void)
+{
+ kfree(random_data);
+ unregister_virtio_driver(&virtio_rng);
+}
+module_init(init);
+module_exit(fini);
+
+MODULE_DEVICE_TABLE(virtio, id_table);
+MODULE_DESCRIPTION("Virtio random number driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c
index 1b9a870..0e6df28 100644
--- a/drivers/char/ipmi/ipmi_watchdog.c
+++ b/drivers/char/ipmi/ipmi_watchdog.c
@@ -755,9 +755,8 @@
rv = ipmi_heartbeat();
if (rv)
return rv;
- return 1;
}
- return 0;
+ return len;
}
static ssize_t ipmi_read(struct file *file,
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index 7f7e798..d9a0a53 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -677,12 +677,7 @@
static void k_self(struct vc_data *vc, unsigned char value, char up_flag)
{
- unsigned int uni;
- if (kbd->kbdmode == VC_UNICODE)
- uni = value;
- else
- uni = conv_8bit_to_uni(value);
- k_unicode(vc, uni, up_flag);
+ k_unicode(vc, conv_8bit_to_uni(value), up_flag);
}
static void k_dead2(struct vc_data *vc, unsigned char value, char up_flag)
diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/char/pcmcia/ipwireless/hardware.c
index fa9d3c9..929101e 100644
--- a/drivers/char/pcmcia/ipwireless/hardware.c
+++ b/drivers/char/pcmcia/ipwireless/hardware.c
@@ -251,10 +251,11 @@
int init_loops;
struct timer_list setup_timer;
+ /* Flag if hw is ready to send next packet */
int tx_ready;
- struct list_head tx_queue[NL_NUM_OF_PRIORITIES];
- /* True if any packets are queued for transmission */
+ /* Count of pending packets to be sent */
int tx_queued;
+ struct list_head tx_queue[NL_NUM_OF_PRIORITIES];
int rx_bytes_queued;
struct list_head rx_queue;
@@ -404,6 +405,8 @@
spin_lock_irqsave(&hw->spinlock, flags);
+ hw->tx_ready = 0;
+
if (hw->hw_version == HW_VERSION_1) {
outw((unsigned short) length, hw->base_port + IODWR);
@@ -492,6 +495,7 @@
spin_lock_irqsave(&hw->spinlock, flags);
list_add(&packet->queue, &hw->tx_queue[0]);
+ hw->tx_queued++;
spin_unlock_irqrestore(&hw->spinlock, flags);
} else {
if (packet->packet_callback)
@@ -586,8 +590,10 @@
packet = kmalloc(sizeof(struct ipw_rx_packet) +
old_packet->length + minimum_free_space,
GFP_ATOMIC);
- if (!packet)
+ if (!packet) {
+ kfree(old_packet);
return NULL;
+ }
memcpy(packet, old_packet,
sizeof(struct ipw_rx_packet)
+ old_packet->length);
@@ -949,12 +955,10 @@
unsigned long flags;
spin_lock_irqsave(&hw->spinlock, flags);
- if (hw->tx_queued && hw->tx_ready != 0) {
+ if (hw->tx_queued && hw->tx_ready) {
int priority;
struct ipw_tx_packet *packet = NULL;
- hw->tx_ready--;
-
/* Pick a packet */
for (priority = 0; priority < priority_limit; priority++) {
if (!list_empty(&hw->tx_queue[priority])) {
@@ -963,6 +967,7 @@
struct ipw_tx_packet,
queue);
+ hw->tx_queued--;
list_del(&packet->queue);
break;
@@ -973,6 +978,7 @@
spin_unlock_irqrestore(&hw->spinlock, flags);
return 0;
}
+
spin_unlock_irqrestore(&hw->spinlock, flags);
/* Send */
@@ -1063,7 +1069,7 @@
if (irqn & IR_TXINTR) {
ack |= IR_TXINTR;
spin_lock_irqsave(&hw->spinlock, flags);
- hw->tx_ready++;
+ hw->tx_ready = 1;
spin_unlock_irqrestore(&hw->spinlock, flags);
}
/* Received data */
@@ -1170,7 +1176,7 @@
if (memrxdone & MEMRX_RX_DONE) {
writew(0, &hw->memory_info_regs->memreg_rx_done);
spin_lock_irqsave(&hw->spinlock, flags);
- hw->tx_ready++;
+ hw->tx_ready = 1;
spin_unlock_irqrestore(&hw->spinlock, flags);
tx = 1;
}
@@ -1234,7 +1240,7 @@
spin_lock_irqsave(&hw->spinlock, flags);
list_add_tail(&packet->queue, &hw->tx_queue[priority]);
- hw->tx_queued = 1;
+ hw->tx_queued++;
spin_unlock_irqrestore(&hw->spinlock, flags);
flush_packets_to_hw(hw);
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index 5f80a9d..909cac9 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -678,12 +678,13 @@
if (arg != (1<<tmp))
return -EINVAL;
+ rtc_freq = arg;
+
spin_lock_irqsave(&rtc_lock, flags);
if (hpet_set_periodic_freq(arg)) {
spin_unlock_irqrestore(&rtc_lock, flags);
return 0;
}
- rtc_freq = arg;
val = CMOS_READ(RTC_FREQ_SELECT) & 0xf0;
val |= (16 - tmp);
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 13a4bdd..c7a977b 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -623,6 +623,7 @@
{"IFX0102", 0}, /* Infineon */
{"BCM0101", 0}, /* Broadcom */
{"NSC1200", 0}, /* National */
+ {"ICO0102", 0}, /* Intel */
/* Add new here */
{"", 0}, /* User Specified */
{"", 0} /* Terminator */
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index e94bee0..7501310 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -3322,7 +3322,7 @@
msleep_interruptible(duration);
tty->ops->break_ctl(tty, 0);
tty_write_unlock(tty);
- if (!signal_pending(current))
+ if (signal_pending(current))
return -EINTR;
return 0;
}
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index b1a757a..8f81139 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -981,16 +981,9 @@
int n_tty_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
- struct tty_struct *real_tty;
unsigned long flags;
int retval;
- if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
- tty->driver->subtype == PTY_TYPE_MASTER)
- real_tty = tty->link;
- else
- real_tty = tty;
-
switch (cmd) {
case TCXONC:
retval = tty_check_change(tty);
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index fa1ffbf..935f1c2 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -434,7 +434,7 @@
vc->vc_blink, vc->vc_underline,
vc->vc_reverse ^ vc->vc_decscnm, vc->vc_italic);
vc->vc_video_erase_char = (build_attr(vc, vc->vc_color, 1, vc->vc_blink, 0, vc->vc_decscnm, 0) << 8) | ' ';
- vc->vc_scrl_erase_char = (build_attr(vc, vc->vc_def_color, 1, false, false, false, false) << 8) | ' ';
+ vc->vc_scrl_erase_char = (build_attr(vc, vc->vc_def_color, 1, false, false, vc->vc_decscnm, false) << 8) | ' ';
}
/* Note: inverting the screen twice should revert to the original state */
@@ -909,7 +909,7 @@
if (vc->vc_tty) {
struct winsize ws, *cws = &vc->vc_tty->winsize;
- unsigned long flags;
+ struct pid *pgrp = NULL;
memset(&ws, 0, sizeof(ws));
ws.ws_row = vc->vc_rows;
@@ -917,11 +917,14 @@
ws.ws_ypixel = vc->vc_scan_lines;
mutex_lock(&vc->vc_tty->termios_mutex);
- spin_lock_irqsave(&vc->vc_tty->ctrl_lock, flags);
- if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col) &&
- vc->vc_tty->pgrp)
+ spin_lock_irq(&vc->vc_tty->ctrl_lock);
+ if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col))
+ pgrp = get_pid(vc->vc_tty->pgrp);
+ spin_unlock_irq(&vc->vc_tty->ctrl_lock);
+ if (pgrp) {
kill_pgrp(vc->vc_tty->pgrp, SIGWINCH, 1);
- spin_unlock_irqrestore(&vc->vc_tty->ctrl_lock, flags);
+ put_pid(pgrp);
+ }
*cws = ws;
mutex_unlock(&vc->vc_tty->termios_mutex);
}
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index 85e2ba7..bf48300 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -27,6 +27,8 @@
#include <linux/moduleparam.h>
#include <linux/connector.h>
#include <linux/mutex.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
#include <net/sock.h>
@@ -403,6 +405,40 @@
mutex_unlock(¬ify_lock);
}
+static int cn_proc_show(struct seq_file *m, void *v)
+{
+ struct cn_queue_dev *dev = cdev.cbdev;
+ struct cn_callback_entry *cbq;
+
+ seq_printf(m, "Name ID\n");
+
+ spin_lock_bh(&dev->queue_lock);
+
+ list_for_each_entry(cbq, &dev->queue_list, callback_entry) {
+ seq_printf(m, "%-15s %u:%u\n",
+ cbq->id.name,
+ cbq->id.id.idx,
+ cbq->id.id.val);
+ }
+
+ spin_unlock_bh(&dev->queue_lock);
+
+ return 0;
+}
+
+static int cn_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, cn_proc_show, NULL);
+}
+
+static const struct file_operations cn_file_ops = {
+ .owner = THIS_MODULE,
+ .open = cn_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release
+};
+
static int __devinit cn_init(void)
{
struct cn_dev *dev = &cdev;
@@ -434,6 +470,8 @@
return -EINVAL;
}
+ proc_net_fops_create(&init_net, "connector", S_IRUGO, &cn_file_ops);
+
return 0;
}
@@ -443,6 +481,8 @@
cn_already_initialized = 0;
+ proc_net_remove(&init_net, "connector");
+
cn_del_callback(&dev->id);
cn_queue_free_dev(dev->cbdev);
netlink_kernel_release(dev->nls);
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 86f0a24..1d41496 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -412,7 +412,7 @@
int ret;
mutex_unlock(&cpufreq_governor_mutex);
- ret = request_module(name);
+ ret = request_module("%s", name);
mutex_lock(&cpufreq_governor_mutex);
if (ret == 0)
@@ -625,7 +625,7 @@
unsigned int freq = 0;
unsigned int ret;
- if (!policy->governor->store_setspeed)
+ if (!policy->governor || !policy->governor->store_setspeed)
return -EINVAL;
ret = sscanf(buf, "%u", &freq);
@@ -639,7 +639,7 @@
static ssize_t show_scaling_setspeed(struct cpufreq_policy *policy, char *buf)
{
- if (!policy->governor->show_setspeed)
+ if (!policy->governor || !policy->governor->show_setspeed)
return sprintf(buf, "<unsupported>\n");
return policy->governor->show_setspeed(policy, buf);
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index fc555a9..23554b6 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -38,6 +38,8 @@
static void cpuidle_kick_cpus(void) {}
#endif
+static int __cpuidle_register_device(struct cpuidle_device *dev);
+
/**
* cpuidle_idle_call - the main idle loop
*
@@ -138,6 +140,12 @@
if (!dev->state_count)
return -EINVAL;
+ if (dev->registered == 0) {
+ ret = __cpuidle_register_device(dev);
+ if (ret)
+ return ret;
+ }
+
if ((ret = cpuidle_add_state_sysfs(dev)))
return ret;
@@ -232,10 +240,13 @@
#endif /* CONFIG_ARCH_HAS_CPU_RELAX */
/**
- * cpuidle_register_device - registers a CPU's idle PM feature
+ * __cpuidle_register_device - internal register function called before register
+ * and enable routines
* @dev: the cpu
+ *
+ * cpuidle_lock mutex must be held before this is called
*/
-int cpuidle_register_device(struct cpuidle_device *dev)
+static int __cpuidle_register_device(struct cpuidle_device *dev)
{
int ret;
struct sys_device *sys_dev = get_cpu_sysdev((unsigned long)dev->cpu);
@@ -247,18 +258,34 @@
init_completion(&dev->kobj_unregister);
- mutex_lock(&cpuidle_lock);
-
poll_idle_init(dev);
per_cpu(cpuidle_devices, dev->cpu) = dev;
list_add(&dev->device_list, &cpuidle_detected_devices);
if ((ret = cpuidle_add_sysfs(sys_dev))) {
- mutex_unlock(&cpuidle_lock);
module_put(cpuidle_curr_driver->owner);
return ret;
}
+ dev->registered = 1;
+ return 0;
+}
+
+/**
+ * cpuidle_register_device - registers a CPU's idle PM feature
+ * @dev: the cpu
+ */
+int cpuidle_register_device(struct cpuidle_device *dev)
+{
+ int ret;
+
+ mutex_lock(&cpuidle_lock);
+
+ if ((ret = __cpuidle_register_device(dev))) {
+ mutex_unlock(&cpuidle_lock);
+ return ret;
+ }
+
cpuidle_enable_device(dev);
cpuidle_install_idle_handler();
@@ -278,6 +305,9 @@
{
struct sys_device *sys_dev = get_cpu_sysdev((unsigned long)dev->cpu);
+ if (dev->registered == 0)
+ return;
+
cpuidle_pause_and_lock();
cpuidle_disable_device(dev);
diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
index fb4d391..76f26710 100644
--- a/drivers/firewire/Kconfig
+++ b/drivers/firewire/Kconfig
@@ -1,28 +1,26 @@
-comment "An alternative FireWire stack is available with EXPERIMENTAL=y"
+comment "A new alternative FireWire stack is available with EXPERIMENTAL=y"
depends on EXPERIMENTAL=n
+comment "Enable only one of the two stacks, unless you know what you are doing"
+ depends on EXPERIMENTAL
+
config FIREWIRE
- tristate "IEEE 1394 (FireWire) support - alternative stack, EXPERIMENTAL"
+ tristate "New FireWire stack, EXPERIMENTAL"
depends on EXPERIMENTAL
select CRC_ITU_T
help
This is the "Juju" FireWire stack, a new alternative implementation
designed for robustness and simplicity. You can build either this
- stack, or the classic stack (the ieee1394 driver, ohci1394 etc.)
- or both. Please read http://wiki.linux1394.org/JujuMigration before
- you enable the new stack.
+ stack, or the old stack (the ieee1394 driver, ohci1394 etc.) or both.
+ Please read http://wiki.linux1394.org/JujuMigration before you
+ enable the new stack.
To compile this driver as a module, say M here: the module will be
called firewire-core. It functionally replaces ieee1394, raw1394,
and video1394.
- NOTE:
-
- You should only build ONE of the stacks, unless you REALLY know what
- you are doing.
-
config FIREWIRE_OHCI
- tristate "Support for OHCI FireWire host controllers"
+ tristate "OHCI-1394 controllers"
depends on PCI && FIREWIRE
help
Enable this driver if you have a FireWire controller based
@@ -33,12 +31,12 @@
called firewire-ohci. It replaces ohci1394 of the classic IEEE 1394
stack.
- NOTE:
+ NOTE:
- You should only build ohci1394 or firewire-ohci, but not both.
- If you nevertheless want to install both, you should configure them
- only as modules and blacklist the driver(s) which you don't want to
- have auto-loaded. Add either
+ You should only build either firewire-ohci or the old ohci1394 driver,
+ but not both. If you nevertheless want to install both, you should
+ configure them only as modules and blacklist the driver(s) which you
+ don't want to have auto-loaded. Add either
blacklist firewire-ohci
or
@@ -60,7 +58,7 @@
default y
config FIREWIRE_SBP2
- tristate "Support for storage devices (SBP-2 protocol driver)"
+ tristate "Storage devices (SBP-2 protocol)"
depends on FIREWIRE && SCSI
help
This option enables you to use SBP-2 devices connected to a
diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c
index dda1401..c639915 100644
--- a/drivers/firewire/fw-cdev.c
+++ b/drivers/firewire/fw-cdev.c
@@ -205,6 +205,7 @@
return dequeue_event(client, buffer, count);
}
+/* caller must hold card->lock so that node pointers can be dereferenced here */
static void
fill_bus_reset_event(struct fw_cdev_event_bus_reset *event,
struct client *client)
@@ -214,7 +215,6 @@
event->closure = client->bus_reset_closure;
event->type = FW_CDEV_EVENT_BUS_RESET;
event->generation = client->device->generation;
- smp_rmb(); /* node_id must not be older than generation */
event->node_id = client->device->node_id;
event->local_node_id = card->local_node->node_id;
event->bm_node_id = 0; /* FIXME: We don't track the BM. */
@@ -274,6 +274,7 @@
{
struct fw_cdev_get_info *get_info = buffer;
struct fw_cdev_event_bus_reset bus_reset;
+ struct fw_card *card = client->device->card;
unsigned long ret = 0;
client->version = get_info->version;
@@ -299,13 +300,17 @@
client->bus_reset_closure = get_info->bus_reset_closure;
if (get_info->bus_reset != 0) {
void __user *uptr = u64_to_uptr(get_info->bus_reset);
+ unsigned long flags;
+ spin_lock_irqsave(&card->lock, flags);
fill_bus_reset_event(&bus_reset, client);
+ spin_unlock_irqrestore(&card->lock, flags);
+
if (copy_to_user(uptr, &bus_reset, sizeof(bus_reset)))
return -EFAULT;
}
- get_info->card = client->device->card->index;
+ get_info->card = card->index;
return 0;
}
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 4f02c55..0b66306 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -265,27 +265,25 @@
!(evt & OHCI1394_busReset))
return;
- printk(KERN_DEBUG KBUILD_MODNAME ": IRQ "
- "%08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
- evt,
- evt & OHCI1394_selfIDComplete ? " selfID" : "",
- evt & OHCI1394_RQPkt ? " AR_req" : "",
- evt & OHCI1394_RSPkt ? " AR_resp" : "",
- evt & OHCI1394_reqTxComplete ? " AT_req" : "",
- evt & OHCI1394_respTxComplete ? " AT_resp" : "",
- evt & OHCI1394_isochRx ? " IR" : "",
- evt & OHCI1394_isochTx ? " IT" : "",
- evt & OHCI1394_postedWriteErr ? " postedWriteErr" : "",
- evt & OHCI1394_cycleTooLong ? " cycleTooLong" : "",
- evt & OHCI1394_cycle64Seconds ? " cycle64Seconds" : "",
- evt & OHCI1394_regAccessFail ? " regAccessFail" : "",
- evt & OHCI1394_busReset ? " busReset" : "",
- evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt |
- OHCI1394_RSPkt | OHCI1394_reqTxComplete |
- OHCI1394_respTxComplete | OHCI1394_isochRx |
- OHCI1394_isochTx | OHCI1394_postedWriteErr |
- OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds |
- OHCI1394_regAccessFail | OHCI1394_busReset)
+ fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt,
+ evt & OHCI1394_selfIDComplete ? " selfID" : "",
+ evt & OHCI1394_RQPkt ? " AR_req" : "",
+ evt & OHCI1394_RSPkt ? " AR_resp" : "",
+ evt & OHCI1394_reqTxComplete ? " AT_req" : "",
+ evt & OHCI1394_respTxComplete ? " AT_resp" : "",
+ evt & OHCI1394_isochRx ? " IR" : "",
+ evt & OHCI1394_isochTx ? " IT" : "",
+ evt & OHCI1394_postedWriteErr ? " postedWriteErr" : "",
+ evt & OHCI1394_cycleTooLong ? " cycleTooLong" : "",
+ evt & OHCI1394_cycle64Seconds ? " cycle64Seconds" : "",
+ evt & OHCI1394_regAccessFail ? " regAccessFail" : "",
+ evt & OHCI1394_busReset ? " busReset" : "",
+ evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt |
+ OHCI1394_RSPkt | OHCI1394_reqTxComplete |
+ OHCI1394_respTxComplete | OHCI1394_isochRx |
+ OHCI1394_isochTx | OHCI1394_postedWriteErr |
+ OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds |
+ OHCI1394_regAccessFail | OHCI1394_busReset)
? " ?" : "");
}
@@ -308,23 +306,22 @@
if (likely(!(param_debug & OHCI_PARAM_DEBUG_SELFIDS)))
return;
- printk(KERN_DEBUG KBUILD_MODNAME ": %d selfIDs, generation %d, "
- "local node ID %04x\n", self_id_count, generation, node_id);
+ fw_notify("%d selfIDs, generation %d, local node ID %04x\n",
+ self_id_count, generation, node_id);
for (; self_id_count--; ++s)
if ((*s & 1 << 23) == 0)
- printk(KERN_DEBUG "selfID 0: %08x, phy %d [%c%c%c] "
- "%s gc=%d %s %s%s%s\n",
- *s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2),
- speed[*s >> 14 & 3], *s >> 16 & 63,
- power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "",
- *s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : "");
+ fw_notify("selfID 0: %08x, phy %d [%c%c%c] "
+ "%s gc=%d %s %s%s%s\n",
+ *s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2),
+ speed[*s >> 14 & 3], *s >> 16 & 63,
+ power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "",
+ *s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : "");
else
- printk(KERN_DEBUG "selfID n: %08x, phy %d "
- "[%c%c%c%c%c%c%c%c]\n",
- *s, *s >> 24 & 63,
- _p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10),
- _p(s, 8), _p(s, 6), _p(s, 4), _p(s, 2));
+ fw_notify("selfID n: %08x, phy %d [%c%c%c%c%c%c%c%c]\n",
+ *s, *s >> 24 & 63,
+ _p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10),
+ _p(s, 8), _p(s, 6), _p(s, 4), _p(s, 2));
}
static const char *evts[] = {
@@ -373,15 +370,14 @@
evt = 0x1f;
if (evt == OHCI1394_evt_bus_reset) {
- printk(KERN_DEBUG "A%c evt_bus_reset, generation %d\n",
- dir, (header[2] >> 16) & 0xff);
+ fw_notify("A%c evt_bus_reset, generation %d\n",
+ dir, (header[2] >> 16) & 0xff);
return;
}
if (header[0] == ~header[1]) {
- printk(KERN_DEBUG "A%c %s, %s, %08x\n",
- dir, evts[evt], phys[header[0] >> 30 & 0x3],
- header[0]);
+ fw_notify("A%c %s, %s, %08x\n",
+ dir, evts[evt], phys[header[0] >> 30 & 0x3], header[0]);
return;
}
@@ -400,24 +396,23 @@
switch (tcode) {
case 0xe: case 0xa:
- printk(KERN_DEBUG "A%c %s, %s\n",
- dir, evts[evt], tcodes[tcode]);
+ fw_notify("A%c %s, %s\n", dir, evts[evt], tcodes[tcode]);
break;
case 0x0: case 0x1: case 0x4: case 0x5: case 0x9:
- printk(KERN_DEBUG "A%c spd %x tl %02x, "
- "%04x -> %04x, %s, "
- "%s, %04x%08x%s\n",
- dir, speed, header[0] >> 10 & 0x3f,
- header[1] >> 16, header[0] >> 16, evts[evt],
- tcodes[tcode], header[1] & 0xffff, header[2], specific);
+ fw_notify("A%c spd %x tl %02x, "
+ "%04x -> %04x, %s, "
+ "%s, %04x%08x%s\n",
+ dir, speed, header[0] >> 10 & 0x3f,
+ header[1] >> 16, header[0] >> 16, evts[evt],
+ tcodes[tcode], header[1] & 0xffff, header[2], specific);
break;
default:
- printk(KERN_DEBUG "A%c spd %x tl %02x, "
- "%04x -> %04x, %s, "
- "%s%s\n",
- dir, speed, header[0] >> 10 & 0x3f,
- header[1] >> 16, header[0] >> 16, evts[evt],
- tcodes[tcode], specific);
+ fw_notify("A%c spd %x tl %02x, "
+ "%04x -> %04x, %s, "
+ "%s%s\n",
+ dir, speed, header[0] >> 10 & 0x3f,
+ header[1] >> 16, header[0] >> 16, evts[evt],
+ tcodes[tcode], specific);
}
}
@@ -548,6 +543,11 @@
p.header_length = 12;
p.payload_length = 0;
break;
+
+ default:
+ /* FIXME: Stop context, discard everything, and restart? */
+ p.header_length = 0;
+ p.payload_length = 0;
}
p.payload = (void *) buffer + p.header_length;
@@ -1468,6 +1468,9 @@
reg_write(ohci, OHCI1394_HCControlClear,
OHCI1394_HCControl_noByteSwapData);
+ reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
+ reg_write(ohci, OHCI1394_LinkControlClear,
+ OHCI1394_LinkControl_rcvPhyPkt);
reg_write(ohci, OHCI1394_LinkControlSet,
OHCI1394_LinkControl_rcvSelfID |
OHCI1394_LinkControl_cycleTimerEnable |
@@ -1481,7 +1484,6 @@
ar_context_run(&ohci->ar_request_ctx);
ar_context_run(&ohci->ar_response_ctx);
- reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000);
reg_write(ohci, OHCI1394_IntEventClear, ~0);
reg_write(ohci, OHCI1394_IntMaskClear, ~0);
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index b2458bb..227d2e0 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -1051,7 +1051,8 @@
break;
case SBP2_CSR_LOGICAL_UNIT_DIRECTORY:
- if (sbp2_scan_logical_unit_dir(tgt, ci.p + value) < 0)
+ /* Adjust for the increment in the iterator */
+ if (sbp2_scan_logical_unit_dir(tgt, ci.p - 1 + value) < 0)
return -ENOMEM;
break;
}
diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c
index ccf0e4c..03ae8a7 100644
--- a/drivers/firewire/fw-transaction.c
+++ b/drivers/firewire/fw-transaction.c
@@ -20,6 +20,7 @@
#include <linux/completion.h>
#include <linux/kernel.h>
+#include <linux/kref.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -297,37 +298,55 @@
struct fw_phy_packet {
struct fw_packet packet;
struct completion done;
+ struct kref kref;
};
-static void
-transmit_phy_packet_callback(struct fw_packet *packet,
- struct fw_card *card, int status)
+static void phy_packet_release(struct kref *kref)
+{
+ struct fw_phy_packet *p =
+ container_of(kref, struct fw_phy_packet, kref);
+ kfree(p);
+}
+
+static void transmit_phy_packet_callback(struct fw_packet *packet,
+ struct fw_card *card, int status)
{
struct fw_phy_packet *p =
container_of(packet, struct fw_phy_packet, packet);
complete(&p->done);
+ kref_put(&p->kref, phy_packet_release);
}
void fw_send_phy_config(struct fw_card *card,
int node_id, int generation, int gap_count)
{
- struct fw_phy_packet p;
+ struct fw_phy_packet *p;
+ long timeout = DIV_ROUND_UP(HZ, 10);
u32 data = PHY_IDENTIFIER(PHY_PACKET_CONFIG) |
PHY_CONFIG_ROOT_ID(node_id) |
PHY_CONFIG_GAP_COUNT(gap_count);
- p.packet.header[0] = data;
- p.packet.header[1] = ~data;
- p.packet.header_length = 8;
- p.packet.payload_length = 0;
- p.packet.speed = SCODE_100;
- p.packet.generation = generation;
- p.packet.callback = transmit_phy_packet_callback;
- init_completion(&p.done);
+ p = kmalloc(sizeof(*p), GFP_KERNEL);
+ if (p == NULL)
+ return;
- card->driver->send_request(card, &p.packet);
- wait_for_completion(&p.done);
+ p->packet.header[0] = data;
+ p->packet.header[1] = ~data;
+ p->packet.header_length = 8;
+ p->packet.payload_length = 0;
+ p->packet.speed = SCODE_100;
+ p->packet.generation = generation;
+ p->packet.callback = transmit_phy_packet_callback;
+ init_completion(&p->done);
+ kref_set(&p->kref, 2);
+
+ card->driver->send_request(card, &p->packet);
+ timeout = wait_for_completion_timeout(&p->done, timeout);
+ kref_put(&p->kref, phy_packet_release);
+
+ /* will leak p if the callback is never executed */
+ WARN_ON(timeout == 0);
}
void fw_flush_transactions(struct fw_card *card)
@@ -572,7 +591,8 @@
break;
default:
- BUG();
+ fw_error("ERROR - corrupt request received - %08x %08x %08x\n",
+ p->header[0], p->header[1], p->header[2]);
return NULL;
}
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index 74401198..9e4f59d 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -753,7 +753,7 @@
if (!edd_num_devices()) {
printk(KERN_INFO "EDD information not available.\n");
- return 1;
+ return -ENODEV;
}
edd_kset = kset_create_and_add("edd", NULL, firmware_kobj);
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index bbd2834..008c38b 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -28,12 +28,18 @@
comment "I2C GPIO expanders:"
config GPIO_PCA953X
- tristate "PCA953x I/O ports"
+ tristate "PCA953x, PCA955x, and MAX7310 I/O ports"
depends on I2C
help
- Say yes here to support the PCA9534 (8-bit), PCA9535 (16-bit),
- PCA9536 (4-bit), PCA9537 (4-bit), PCA9538 (8-bit), and PCA9539
- (16-bit) I/O ports. These parts are made by NXP and TI.
+ Say yes here to provide access to several register-oriented
+ SMBus I/O expanders, made mostly by NXP or TI. Compatible
+ models include:
+
+ 4 bits: pca9536, pca9537
+
+ 8 bits: max7310, pca9534, pca9538, pca9554, pca9557
+
+ 16 bits: pca9535, pca9539, pca9555
This driver can also be built as a module. If so, the module
will be called pca953x.
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 7e40e8a..a380730 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -33,7 +33,7 @@
{ "pca9554", 8, },
{ "pca9555", 16, },
{ "pca9557", 8, },
- /* REVISIT several pca955x parts should work here too */
+ { "max7310", 8, },
{ }
};
MODULE_DEVICE_TABLE(i2c, pca953x_id);
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index ed33fdd..f00f497 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -30,6 +30,7 @@
#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/dmi.h>
#include <asm/io.h>
/* uGuru3 bank addresses */
@@ -323,7 +324,7 @@
{ "AUX1 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0013, "unknown", {
+ { 0x0013, "Abit AW8D", {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
@@ -349,6 +350,7 @@
{ "AUX2 Fan", 36, 2, 60, 1, 0 },
{ "AUX3 Fan", 37, 2, 60, 1, 0 },
{ "AUX4 Fan", 38, 2, 60, 1, 0 },
+ { "AUX5 Fan", 39, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
{ 0x0014, "Abit AB9 Pro", {
@@ -1111,11 +1113,12 @@
{
/* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or
0x08 at DATA and 0xAC at CMD. Sometimes the uGuru3 will hold 0x05
- at CMD instead, why is unknown. So we test for 0x05 too. */
+ or 0x55 at CMD instead, why is unknown. */
u8 data_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_DATA);
u8 cmd_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_CMD);
if (((data_val == 0x00) || (data_val == 0x08)) &&
- ((cmd_val == 0xAC) || (cmd_val == 0x05)))
+ ((cmd_val == 0xAC) || (cmd_val == 0x05) ||
+ (cmd_val == 0x55)))
return ABIT_UGURU3_BASE;
ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = "
@@ -1138,6 +1141,15 @@
int address, err;
struct resource res = { .flags = IORESOURCE_IO };
+#ifdef CONFIG_DMI
+ const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+
+ /* safety check, refuse to load on non Abit motherboards */
+ if (!force && (!board_vendor ||
+ strcmp(board_vendor, "http://www.abit.com.tw/")))
+ return -ENODEV;
+#endif
+
address = abituguru3_detect();
if (address < 0)
return address;
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index c1009d6..93dbf5e 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -309,6 +309,9 @@
ADT7473_REG_PWM_BHVR(i));
}
+ i = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4);
+ data->max_duty_at_overheat = !!(i & ADT7473_CFG4_MAX_DUTY_AT_OVT);
+
data->limits_last_updated = local_jiffies;
data->limits_valid = 1;
diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index 88e8965..50f2269 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -516,16 +516,23 @@
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"),
HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61i"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61"),
HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"),
HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"),
HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61p"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X41"),
HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61s"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad Z60m"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61m"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61p"),
{ .ident = NULL }
};
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index 5c006c9..c9416e6 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -189,8 +189,8 @@
struct aem_find_firmware_req {
struct aem_iana_id id;
u8 rsvd;
- u16 index;
- u16 module_type_id;
+ __be16 index;
+ __be16 module_type_id;
} __packed;
struct aem_find_firmware_resp {
@@ -202,7 +202,7 @@
struct aem_find_instance_req {
struct aem_iana_id id;
u8 instance_number;
- u16 module_type_id;
+ __be16 module_type_id;
} __packed;
struct aem_find_instance_resp {
@@ -444,17 +444,17 @@
}
case 2: {
u16 *x = buf;
- *x = be16_to_cpup((u16 *)rs_resp->bytes);
+ *x = be16_to_cpup((__be16 *)rs_resp->bytes);
break;
}
case 4: {
u32 *x = buf;
- *x = be32_to_cpup((u32 *)rs_resp->bytes);
+ *x = be32_to_cpup((__be32 *)rs_resp->bytes);
break;
}
case 8: {
u64 *x = buf;
- *x = be64_to_cpup((u64 *)rs_resp->bytes);
+ *x = be64_to_cpup((__be64 *)rs_resp->bytes);
break;
}
}
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index fa76969..de698dc 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -251,10 +251,13 @@
the SMBus standard. */
static int lm75_read_value(struct i2c_client *client, u8 reg)
{
+ int value;
+
if (reg == LM75_REG_CONF)
return i2c_smbus_read_byte_data(client, reg);
- else
- return swab16(i2c_smbus_read_word_data(client, reg));
+
+ value = i2c_smbus_read_word_data(client, reg);
+ return (value < 0) ? value : swab16(value);
}
static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
@@ -287,9 +290,16 @@
int i;
dev_dbg(&client->dev, "Starting lm75 update\n");
- for (i = 0; i < ARRAY_SIZE(data->temp); i++)
- data->temp[i] = lm75_read_value(client,
- LM75_REG_TEMP[i]);
+ for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+ int status;
+
+ status = lm75_read_value(client, LM75_REG_TEMP[i]);
+ if (status < 0)
+ dev_dbg(&client->dev, "reg %d, err %d\n",
+ LM75_REG_TEMP[i], status);
+ else
+ data->temp[i] = status;
+ }
data->last_updated = jiffies;
data->valid = 1;
}
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 182fe6a..ee5eca1 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -192,23 +192,20 @@
{
int i;
- if ( range < lm85_range_map[0] ) {
- return 0 ;
- } else if ( range > lm85_range_map[15] ) {
+ if (range >= lm85_range_map[15])
return 15 ;
- } else { /* find closest match */
- for ( i = 14 ; i >= 0 ; --i ) {
- if ( range > lm85_range_map[i] ) { /* range bracketed */
- if ((lm85_range_map[i+1] - range) <
- (range - lm85_range_map[i])) {
- i++;
- break;
- }
- break;
- }
+
+ /* Find the closest match */
+ for (i = 14; i >= 0; --i) {
+ if (range >= lm85_range_map[i]) {
+ if ((lm85_range_map[i + 1] - range) <
+ (range - lm85_range_map[i]))
+ return i + 1;
+ return i;
}
}
- return( i & 0x0f );
+
+ return 0;
}
#define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f])
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 1305ef1..9e8c875 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -290,12 +290,12 @@
* bus, or started a new i2c message
*/
- if (iicstat & S3C2410_IICSTAT_LASTBIT &&
+ if (iicstat & S3C2410_IICSTAT_LASTBIT &&
!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
/* ack was not received... */
dev_dbg(i2c->dev, "ack was not received\n");
- s3c24xx_i2c_stop(i2c, -EREMOTEIO);
+ s3c24xx_i2c_stop(i2c, -ENXIO);
goto out_ack;
}
@@ -305,7 +305,7 @@
i2c->state = STATE_WRITE;
/* terminate the transfer if there is nothing to do
- * (used by the i2c probe to find devices */
+ * as this is used by the i2c probe to find devices. */
if (is_lastmsg(i2c) && i2c->msg->len == 0) {
s3c24xx_i2c_stop(i2c, 0);
@@ -323,7 +323,17 @@
* end of the message, and if so, work out what to do
*/
+ if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
+ if (iicstat & S3C2410_IICSTAT_LASTBIT) {
+ dev_dbg(i2c->dev, "WRITE: No Ack\n");
+
+ s3c24xx_i2c_stop(i2c, -ECONNREFUSED);
+ goto out_ack;
+ }
+ }
+
retry_write:
+
if (!is_msgend(i2c)) {
byte = i2c->msg->buf[i2c->msg_ptr++];
writeb(byte, i2c->regs + S3C2410_IICDS);
@@ -377,17 +387,6 @@
* going to do any more read/write
*/
- if (!(i2c->msg->flags & I2C_M_IGNORE_NAK) &&
- !(is_msglast(i2c) && is_lastmsg(i2c))) {
-
- if (iicstat & S3C2410_IICSTAT_LASTBIT) {
- dev_dbg(i2c->dev, "READ: No Ack\n");
-
- s3c24xx_i2c_stop(i2c, -ECONNREFUSED);
- goto out_ack;
- }
- }
-
byte = readb(i2c->regs + S3C2410_IICDS);
i2c->msg->buf[i2c->msg_ptr++] = byte;
@@ -949,3 +948,4 @@
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:s3c2410-i2c");
+MODULE_ALIAS("platform:s3c2440-i2c");
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index b4f3aef..1607536 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -1028,6 +1028,7 @@
config BLK_DEV_HD_ONLY
bool "Old hard disk (MFM/RLL/IDE) driver"
+ depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN
help
There are two drivers for MFM/RLL/IDE hard disks. Most people use
the newer enhanced driver, but this old one is still around for two
diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c
index 713cef2..8e8c281 100644
--- a/drivers/ide/arm/bast-ide.c
+++ b/drivers/ide/arm/bast-ide.c
@@ -42,6 +42,7 @@
hw.io_ports.ctl_addr = aux + (6 * 0x20);
hw.irq = irq;
+ hw.chipset = ide_generic;
hwif = ide_find_port();
if (hwif == NULL)
diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c
index 4263ffd..2f311da 100644
--- a/drivers/ide/arm/ide_arm.c
+++ b/drivers/ide/arm/ide_arm.c
@@ -49,6 +49,7 @@
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, base, ctl);
hw.irq = IDE_ARM_IRQ;
+ hw.chipset = ide_generic;
hwif = ide_find_port();
if (hwif) {
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index 96378eb..2f2b4f4 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -76,7 +76,7 @@
#include "../ide-timing.h"
-static long ide_palm_clk;
+static unsigned ideclk_period; /* in nanoseconds */
static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
{160, 240}, /* UDMA Mode 0 */
@@ -86,8 +86,6 @@
{85, 60}, /* UDMA Mode 4 */
};
-static struct clk *ideclkp;
-
static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
unsigned int mode)
{
@@ -97,10 +95,10 @@
/* DMA Data Setup */
t0 = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].cycletime,
- ide_palm_clk) - 1;
- tenv = DIV_ROUND_UP(20, ide_palm_clk) - 1;
+ ideclk_period) - 1;
+ tenv = DIV_ROUND_UP(20, ideclk_period) - 1;
trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime,
- ide_palm_clk) - 1;
+ ideclk_period) - 1;
/* udmatim Register */
val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0);
@@ -141,8 +139,8 @@
cycletime = max_t(int, t->cycle, min_cycle);
/* DMA Data Setup */
- t0 = DIV_ROUND_UP(cycletime, ide_palm_clk);
- td = DIV_ROUND_UP(t->active, ide_palm_clk);
+ t0 = DIV_ROUND_UP(cycletime, ideclk_period);
+ td = DIV_ROUND_UP(t->active, ideclk_period);
tkw = t0 - td - 1;
td -= 1;
@@ -168,9 +166,9 @@
struct ide_timing *t;
/* PIO Data Setup */
- t0 = DIV_ROUND_UP(cycletime, ide_palm_clk);
+ t0 = DIV_ROUND_UP(cycletime, ideclk_period);
t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active,
- ide_palm_clk);
+ ideclk_period);
t2i = t0 - t2 - 1;
t2 -= 1;
@@ -192,8 +190,8 @@
/* TASKFILE Setup */
t = ide_timing_find_mode(XFER_PIO_0 + mode);
- t0 = DIV_ROUND_UP(t->cyc8b, ide_palm_clk);
- t2 = DIV_ROUND_UP(t->act8b, ide_palm_clk);
+ t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
+ t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
t2i = t0 - t2 - 1;
t2 -= 1;
@@ -350,22 +348,22 @@
static int __devinit palm_bk3710_probe(struct platform_device *pdev)
{
- struct clk *clkp;
+ struct clk *clk;
struct resource *mem, *irq;
ide_hwif_t *hwif;
- void __iomem *base;
- int pribase, i;
+ unsigned long base, rate;
+ int i;
hw_regs_t hw;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
- clkp = clk_get(NULL, "IDECLK");
- if (IS_ERR(clkp))
+ clk = clk_get(NULL, "IDECLK");
+ if (IS_ERR(clk))
return -ENODEV;
- ideclkp = clkp;
- clk_enable(ideclkp);
- ide_palm_clk = clk_get_rate(ideclkp)/100000;
- ide_palm_clk = (10000/ide_palm_clk) + 1;
+ clk_enable(clk);
+ rate = clk_get_rate(clk);
+ ideclk_period = 1000000000UL / rate;
+
/* Register the IDE interface with Linux ATA Interface */
memset(&hw, 0, sizeof(hw));
@@ -374,22 +372,27 @@
printk(KERN_ERR "failed to get memory region resource\n");
return -ENODEV;
}
+
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (irq == NULL) {
printk(KERN_ERR "failed to get IRQ resource\n");
return -ENODEV;
}
- base = (void *)mem->start;
+ if (request_mem_region(mem->start, mem->end - mem->start + 1,
+ "palm_bk3710") == NULL) {
+ printk(KERN_ERR "failed to request memory region\n");
+ return -EBUSY;
+ }
+
+ base = IO_ADDRESS(mem->start);
/* Configure the Palm Chip controller */
- palm_bk3710_chipinit(base);
+ palm_bk3710_chipinit((void __iomem *)base);
- pribase = mem->start + IDE_PALM_ATA_PRI_REG_OFFSET;
for (i = 0; i < IDE_NR_PORTS - 2; i++)
- hw.io_ports_array[i] = pribase + i;
- hw.io_ports.ctl_addr = mem->start +
- IDE_PALM_ATA_PRI_CTL_OFFSET;
+ hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
+ hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
hw.irq = irq->start;
hw.chipset = ide_palm3710;
@@ -409,9 +412,6 @@
ide_device_add(idx, &palm_bk3710_port_info);
- if (!hwif->present)
- goto out;
-
return 0;
out:
printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n");
@@ -437,4 +437,3 @@
module_init(palm_bk3710_init);
MODULE_LICENSE("GPL");
-
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index a6073e2..2d92214 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -22,6 +22,10 @@
#define DRV_NAME "ide_generic"
+static int probe_mask = 0x03;
+module_param(probe_mask, int, 0);
+MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports");
+
static ssize_t store_add(struct class *cls, const char *buf, size_t n)
{
ide_hwif_t *hwif;
@@ -89,6 +93,9 @@
u8 idx[MAX_HWIFS];
int i;
+ printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" module "
+ "parameter for probing all legacy ISA IDE ports\n");
+
for (i = 0; i < MAX_HWIFS; i++) {
ide_hwif_t *hwif;
unsigned long io_addr = ide_default_io_base(i);
@@ -96,7 +103,7 @@
idx[i] = 0xff;
- if (io_addr) {
+ if ((probe_mask & (1 << i)) && io_addr) {
if (!request_region(io_addr, 8, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX "
"not free.\n",
@@ -125,6 +132,7 @@
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, io_addr, io_addr + 0x206);
hw.irq = ide_default_irq(io_addr);
+ hw.chipset = ide_generic;
ide_init_port_hw(hwif, &hw);
idx[i] = i;
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
index 6a8953f..adbd017 100644
--- a/drivers/ide/ide-pnp.c
+++ b/drivers/ide/ide-pnp.c
@@ -55,6 +55,7 @@
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, base, ctl);
hw.irq = pnp_irq(dev, 0);
+ hw.chipset = ide_generic;
hwif = ide_find_port();
if (hwif) {
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 655ec7e..26e68b6 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -646,8 +646,6 @@
goto out;
}
- get_device(&hwif->gendev);
-
hwif->portdev = device_create_drvdata(ide_port_class, &hwif->gendev,
MKDEV(0, 0), hwif, hwif->name);
if (IS_ERR(hwif->portdev)) {
@@ -1220,16 +1218,12 @@
complete(&drive->gendev_rel_comp);
}
-#ifndef ide_default_irq
-#define ide_default_irq(irq) 0
-#endif
-
static int hwif_init(ide_hwif_t *hwif)
{
int old_irq;
if (!hwif->irq) {
- hwif->irq = ide_default_irq(hwif->io_ports.data_addr);
+ hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
if (!hwif->irq) {
printk("%s: DISABLED, NO IRQ\n", hwif->name);
return 0;
@@ -1259,7 +1253,7 @@
* It failed to initialise. Find the default IRQ for
* this port and try that.
*/
- hwif->irq = ide_default_irq(hwif->io_ports.data_addr);
+ hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
if (!hwif->irq) {
printk("%s: Disabled unable to get IRQ %d.\n",
hwif->name, old_irq);
@@ -1333,8 +1327,7 @@
static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
const struct ide_port_info *d)
{
- if (d->chipset != ide_etrax100)
- hwif->channel = port;
+ hwif->channel = port;
if (d->chipset)
hwif->chipset = d->chipset;
@@ -1519,7 +1512,7 @@
continue;
}
- if (d->chipset != ide_etrax100 && (i & 1) && mate) {
+ if ((i & 1) && mate) {
hwif->mate = mate;
mate->mate = hwif;
}
@@ -1665,6 +1658,7 @@
ide_std_init_ports(hw, base, ctl);
hw->irq = irq;
+ hw->chipset = d->chipset;
hwif = ide_find_port_slot(d);
if (hwif) {
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index 8d6ad81..8af88bf 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -63,7 +63,6 @@
case ide_pmac: name = "mac-io"; break;
case ide_au1xxx: name = "au1xxx"; break;
case ide_palm3710: name = "palm3710"; break;
- case ide_etrax100: name = "etrax100"; break;
case ide_acorn: name = "acorn"; break;
default: name = "(unknown)"; break;
}
@@ -77,7 +76,7 @@
ide_hwif_t *hwif = (ide_hwif_t *) data;
int len;
- if (hwif && hwif->mate && hwif->mate->present)
+ if (hwif && hwif->mate)
len = sprintf(page, "%s\n", hwif->mate->name);
else
len = sprintf(page, "(none)\n");
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 0c908ca..ab545ff 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -225,10 +225,10 @@
u8 stat;
/*
- * Last sector was transfered, wait until drive is ready.
- * This can take up to 10 usec, but we will wait max 1 ms.
+ * Last sector was transfered, wait until device is ready. This can
+ * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms.
*/
- for (retries = 0; retries < 100; retries++) {
+ for (retries = 0; retries < 1000; retries++) {
stat = ide_read_status(drive);
if (stat & BUSY_STAT)
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index c758dcb..300431d 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -315,13 +315,14 @@
BUG_ON(in_interrupt());
BUG_ON(irqs_disabled());
- mutex_lock(&ide_cfg_mtx);
- spin_lock_irq(&ide_lock);
- if (!hwif->present)
- goto abort;
- __ide_port_unregister_devices(hwif);
- hwif->present = 0;
+ mutex_lock(&ide_cfg_mtx);
+
+ spin_lock_irq(&ide_lock);
+ if (hwif->present) {
+ __ide_port_unregister_devices(hwif);
+ hwif->present = 0;
+ }
spin_unlock_irq(&ide_lock);
ide_proc_unregister_port(hwif);
@@ -351,16 +352,15 @@
blk_unregister_region(MKDEV(hwif->major, 0), MAX_DRIVES<<PARTN_BITS);
kfree(hwif->sg_table);
unregister_blkdev(hwif->major, hwif->name);
- spin_lock_irq(&ide_lock);
if (hwif->dma_base)
ide_release_dma_engine(hwif);
+ spin_lock_irq(&ide_lock);
/* restore hwif data to pristine status */
ide_init_port_data(hwif, hwif->index);
-
-abort:
spin_unlock_irq(&ide_lock);
+
mutex_unlock(&ide_cfg_mtx);
}
@@ -1094,13 +1094,6 @@
EXPORT_SYMBOL_GPL(ide_bus_type);
-static void ide_port_class_release(struct device *portdev)
-{
- ide_hwif_t *hwif = dev_get_drvdata(portdev);
-
- put_device(&hwif->gendev);
-}
-
int ide_vlb_clk;
EXPORT_SYMBOL_GPL(ide_vlb_clk);
@@ -1305,7 +1298,6 @@
ret = PTR_ERR(ide_port_class);
goto out_port_class;
}
- ide_port_class->dev_release = ide_port_class_release;
init_ide_data();
diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c
index 5c730e4..9a1d27e 100644
--- a/drivers/ide/legacy/buddha.c
+++ b/drivers/ide/legacy/buddha.c
@@ -138,6 +138,8 @@
hw->irq = IRQ_AMIGA_PORTS;
hw->ack_intr = ack_intr;
+
+ hw->chipset = ide_generic;
}
/*
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index 9e449a0..af11028 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -81,6 +81,8 @@
hw->irq = IRQ_MFP_IDE;
hw->ack_intr = NULL;
+
+ hw->chipset = ide_generic;
}
/*
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index a9c2593..fed7d81 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -16,6 +16,7 @@
#include <linux/ide.h>
#include <linux/init.h>
#include <linux/zorro.h>
+#include <linux/module.h>
#include <asm/setup.h>
#include <asm/amigahw.h>
@@ -62,7 +63,10 @@
GAYLE_NUM_HWIFS-1)
#define GAYLE_HAS_CONTROL_REG (!ide_doubler)
#define GAYLE_IDEREG_SIZE (ide_doubler ? 0x1000 : 0x2000)
+
int ide_doubler = 0; /* support IDE doublers? */
+EXPORT_SYMBOL_GPL(ide_doubler);
+
module_param_named(doubler, ide_doubler, bool, 0);
MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
@@ -112,6 +116,8 @@
hw->irq = IRQ_AMIGA_PORTS;
hw->ack_intr = ack_intr;
+
+ hw->chipset = ide_generic;
}
/*
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 99af3bb..8dbf4d9 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -135,13 +135,17 @@
{
ide_info_t *info = link->priv;
ide_hwif_t *hwif = info->hwif;
+ unsigned long data_addr, ctl_addr;
DEBUG(0, "ide_detach(0x%p)\n", link);
+ data_addr = hwif->io_ports.data_addr;
+ ctl_addr = hwif->io_ports.ctl_addr;
+
ide_release(link);
- release_region(hwif->io_ports.ctl_addr, 1);
- release_region(hwif->io_ports.data_addr, 8);
+ release_region(ctl_addr, 1);
+ release_region(data_addr, 8);
kfree(info);
} /* ide_detach */
@@ -194,6 +198,16 @@
if (hwif->present)
return hwif;
+ /* retry registration in case device is still spinning up */
+ for (i = 0; i < 10; i++) {
+ msleep(100);
+ ide_port_scan(hwif);
+ if (hwif->present)
+ return hwif;
+ }
+
+ return hwif;
+
out_release:
release_region(ctl, 1);
release_region(io, 8);
@@ -222,7 +236,7 @@
cistpl_cftable_entry_t dflt;
} *stk = NULL;
cistpl_cftable_entry_t *cfg;
- int i, pass, last_ret = 0, last_fn = 0, is_kme = 0;
+ int pass, last_ret = 0, last_fn = 0, is_kme = 0;
unsigned long io_base, ctl_base;
ide_hwif_t *hwif;
@@ -319,30 +333,15 @@
if (is_kme)
outb(0x81, ctl_base+1);
- /* retry registration in case device is still spinning up */
- for (i = 0; i < 10; i++) {
- hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
- if (hwif)
- break;
- if (link->io.NumPorts1 == 0x20) {
+ hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
+ if (hwif == NULL && link->io.NumPorts1 == 0x20) {
outb(0x02, ctl_base + 0x10);
hwif = idecs_register(io_base + 0x10, ctl_base + 0x10,
link->irq.AssignedIRQ, link);
- if (hwif) {
- io_base += 0x10;
- ctl_base += 0x10;
- break;
- }
- }
- msleep(100);
}
- if (hwif == NULL) {
- printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx"
- ", irq %u failed\n", io_base, ctl_base,
- link->irq.AssignedIRQ);
+ if (hwif == NULL)
goto failed;
- }
info->ndev = 1;
sprintf(info->node.dev_name, "hd%c", 'a' + hwif->index * 2);
@@ -411,6 +410,7 @@
PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
+ PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
@@ -440,6 +440,7 @@
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
+ PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
@@ -450,6 +451,7 @@
PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
index caa2632..2e84290 100644
--- a/drivers/ide/legacy/macide.c
+++ b/drivers/ide/legacy/macide.c
@@ -78,6 +78,8 @@
hw->irq = irq;
hw->ack_intr = ack_intr;
+
+ hw->chipset = ide_generic;
}
static const char *mac_ide_name[] =
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index 6f535d0..8ff6e2d 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -70,6 +70,8 @@
hw->irq = irq;
hw->ack_intr = ack_intr;
+
+ hw->chipset = ide_generic;
}
static void q40ide_input_data(ide_drive_t *drive, struct request *rq,
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index aaf3810..b38a1980 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -747,9 +747,11 @@
ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
hw[0].irq = 14;
+ hw[0].chipset = ide_cmd640;
ide_std_init_ports(&hw[1], 0x170, 0x376);
hw[1].irq = 15;
+ hw[1].chipset = ide_cmd640;
printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x"
"\n", 'a' + cmd640_chip_version - 1, bus_type, cfr);
diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c
index b9e4579..af0f300 100644
--- a/drivers/ide/pci/delkin_cb.c
+++ b/drivers/ide/pci/delkin_cb.c
@@ -47,13 +47,18 @@
.quirkproc = ide_undecoded_slave,
};
+static const struct ide_port_info delkin_cb_port_info = {
+ .port_ops = &delkin_cb_port_ops,
+ .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS |
+ IDE_HFLAG_NO_DMA,
+};
+
static int __devinit
delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
{
unsigned long base;
hw_regs_t hw;
ide_hwif_t *hwif = NULL;
- ide_drive_t *drive;
int i, rc;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
@@ -79,6 +84,7 @@
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, base + 0x10, base + 0x1e);
hw.irq = dev->irq;
+ hw.dev = &dev->dev;
hw.chipset = ide_pci; /* this enables IRQ sharing */
hwif = ide_find_port();
@@ -89,26 +95,16 @@
ide_init_port_data(hwif, i);
ide_init_port_hw(hwif, &hw);
- hwif->port_ops = &delkin_cb_port_ops;
idx[0] = i;
- ide_device_add(idx, NULL);
-
- if (!hwif->present)
- goto out_disable;
+ ide_device_add(idx, &delkin_cb_port_info);
pci_set_drvdata(dev, hwif);
- hwif->dev = &dev->dev;
- drive = &hwif->drives[0];
- if (drive->present) {
- drive->io_32bit = 1;
- drive->unmask = 1;
- }
+
return 0;
out_disable:
- printk(KERN_ERR "delkin_cb: no IDE devices found\n");
pci_release_regions(dev);
pci_disable_device(dev);
return -ENODEV;
@@ -139,14 +135,12 @@
.remove = delkin_cb_remove,
};
-static int
-delkin_cb_init (void)
+static int __init delkin_cb_init(void)
{
return pci_register_driver(&driver);
}
-static void
-delkin_cb_exit (void)
+static void __exit delkin_cb_exit(void)
{
pci_unregister_driver(&driver);
}
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 9053c877..2b71bdf 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -184,8 +184,7 @@
static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_setup_pci_device(dev, &it8213_chipsets[id->driver_data]);
- return 0;
+ return ide_setup_pci_device(dev, &it8213_chipsets[id->driver_data]);
}
static const struct pci_device_id it8213_pci_tbl[] = {
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index fec4955..a7a41bb 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -225,10 +225,6 @@
return 1;
}
-#ifndef ide_default_irq
-#define ide_default_irq(irq) 0
-#endif
-
static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -288,7 +284,7 @@
}
if (!using_inta)
- hwif->irq = ide_default_irq(hwif->io_ports.data_addr);
+ hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
else if (!hwif->irq && hwif->mate && hwif->mate->irq)
hwif->irq = hwif->mate->irq; /* share IRQ with mate */
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 6e99080..725c805 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -81,8 +81,6 @@
* 0.5 doesn't work.
*/
-#define OPTI621_DEBUG /* define for debug messages */
-
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
@@ -92,28 +90,6 @@
#include <asm/io.h>
-//#define OPTI621_MAX_PIO 3
-/* In fact, I do not have any PIO 4 drive
- * (address: 25 ns, data: 70 ns, recovery: 35 ns),
- * but OPTi 82C621 is programmable and it can do (minimal values):
- * on 40MHz PCI bus (pulse 25 ns):
- * address: 25 ns, data: 25 ns, recovery: 50 ns;
- * on 20MHz PCI bus (pulse 50 ns):
- * address: 50 ns, data: 50 ns, recovery: 100 ns.
- */
-
-/* #define READ_PREFETCH 0 */
-/* Uncomment for disable read prefetch.
- * There is some readprefetch capatibility in hdparm,
- * but when I type hdparm -P 1 /dev/hda, I got errors
- * and till reset drive is inaccessible.
- * This (hw) read prefetch is safe on my drive.
- */
-
-#ifndef READ_PREFETCH
-#define READ_PREFETCH 0x40 /* read prefetch is enabled */
-#endif /* else read prefetch is disabled */
-
#define READ_REG 0 /* index of Read cycle timing register */
#define WRITE_REG 1 /* index of Write cycle timing register */
#define CNTRL_REG 3 /* index of Control register */
@@ -122,51 +98,8 @@
static int reg_base;
-#define PIO_NOT_EXIST 254
-#define PIO_DONT_KNOW 255
-
static DEFINE_SPINLOCK(opti621_lock);
-/* there are stored pio numbers from other calls of opti621_set_pio_mode */
-static void compute_pios(ide_drive_t *drive, const u8 pio)
-/* Store values into drive->drive_data
- * second_contr - 0 for primary controller, 1 for secondary
- * slave_drive - 0 -> pio is for master, 1 -> pio is for slave
- * pio - PIO mode for selected drive (for other we don't know)
- */
-{
- int d;
- ide_hwif_t *hwif = HWIF(drive);
-
- drive->drive_data = pio;
-
- for (d = 0; d < 2; ++d) {
- drive = &hwif->drives[d];
- if (drive->present) {
- if (drive->drive_data == PIO_DONT_KNOW)
- drive->drive_data = ide_get_best_pio_mode(drive, 255, 3);
-#ifdef OPTI621_DEBUG
- printk("%s: Selected PIO mode %d\n",
- drive->name, drive->drive_data);
-#endif
- } else {
- drive->drive_data = PIO_NOT_EXIST;
- }
- }
-}
-
-static int cmpt_clk(int time, int bus_speed)
-/* Returns (rounded up) time in clocks for time in ns,
- * with bus_speed in MHz.
- * Example: bus_speed = 40 MHz, time = 80 ns
- * 1000/40 = 25 ns (clk value),
- * 80/25 = 3.2, rounded up to 4 (I hope ;-)).
- * Use idebus=xx to select right frequency.
- */
-{
- return ((time*bus_speed+999)/1000);
-}
-
/* Write value to register reg, base of register
* is at reg_base (0x1f0 primary, 0x170 secondary,
* if not changed by PCI configuration).
@@ -199,83 +132,29 @@
return ret;
}
-typedef struct pio_clocks_s {
- int address_time; /* Address setup (clocks) */
- int data_time; /* Active/data pulse (clocks) */
- int recovery_time; /* Recovery time (clocks) */
-} pio_clocks_t;
-
-static void compute_clocks(int pio, pio_clocks_t *clks)
-{
- if (pio != PIO_NOT_EXIST) {
- int adr_setup, data_pls;
- int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock();
-
- adr_setup = ide_pio_timings[pio].setup_time;
- data_pls = ide_pio_timings[pio].active_time;
- clks->address_time = cmpt_clk(adr_setup, bus_speed);
- clks->data_time = cmpt_clk(data_pls, bus_speed);
- clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time
- - adr_setup-data_pls, bus_speed);
- if (clks->address_time < 1)
- clks->address_time = 1;
- if (clks->address_time > 4)
- clks->address_time = 4;
- if (clks->data_time < 1)
- clks->data_time = 1;
- if (clks->data_time > 16)
- clks->data_time = 16;
- if (clks->recovery_time < 2)
- clks->recovery_time = 2;
- if (clks->recovery_time > 17)
- clks->recovery_time = 17;
- } else {
- clks->address_time = 1;
- clks->data_time = 1;
- clks->recovery_time = 2;
- /* minimal values */
- }
-}
-
static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- /* primary and secondary drives share some registers,
- * so we have to program both drives
- */
+ ide_hwif_t *hwif = drive->hwif;
+ ide_drive_t *pair = ide_get_paired_drive(drive);
unsigned long flags;
- u8 pio1 = 0, pio2 = 0;
- pio_clocks_t first, second;
- int ax, drdy;
- u8 cycle1, cycle2, misc;
- ide_hwif_t *hwif = HWIF(drive);
+ u8 tim, misc, addr_pio = pio, clk;
- /* sets drive->drive_data for both drives */
- compute_pios(drive, pio);
- pio1 = hwif->drives[0].drive_data;
- pio2 = hwif->drives[1].drive_data;
+ /* DRDY is default 2 (by OPTi Databook) */
+ static const u8 addr_timings[2][5] = {
+ { 0x20, 0x10, 0x00, 0x00, 0x00 }, /* 33 MHz */
+ { 0x10, 0x10, 0x00, 0x00, 0x00 }, /* 25 MHz */
+ };
+ static const u8 data_rec_timings[2][5] = {
+ { 0x5b, 0x45, 0x32, 0x21, 0x20 }, /* 33 MHz */
+ { 0x48, 0x34, 0x21, 0x10, 0x10 } /* 25 MHz */
+ };
- compute_clocks(pio1, &first);
- compute_clocks(pio2, &second);
+ drive->drive_data = XFER_PIO_0 + pio;
- /* ax = max(a1,a2) */
- ax = (first.address_time < second.address_time) ? second.address_time : first.address_time;
-
- drdy = 2; /* DRDY is default 2 (by OPTi Databook) */
-
- cycle1 = ((first.data_time-1)<<4) | (first.recovery_time-2);
- cycle2 = ((second.data_time-1)<<4) | (second.recovery_time-2);
- misc = READ_PREFETCH | ((ax-1)<<4) | ((drdy-2)<<1);
-
-#ifdef OPTI621_DEBUG
- printk("%s: master: address: %d, data: %d, "
- "recovery: %d, drdy: %d [clk]\n",
- hwif->name, ax, first.data_time,
- first.recovery_time, drdy);
- printk("%s: slave: address: %d, data: %d, "
- "recovery: %d, drdy: %d [clk]\n",
- hwif->name, ax, second.data_time,
- second.recovery_time, drdy);
-#endif
+ if (pair->present) {
+ if (pair->drive_data && pair->drive_data < drive->drive_data)
+ addr_pio = pair->drive_data - XFER_PIO_0;
+ }
spin_lock_irqsave(&opti621_lock, flags);
@@ -289,24 +168,21 @@
(void)inb(reg_base + CNTRL_REG);
/* if reads 0xc0, no interface exist? */
read_reg(CNTRL_REG);
- /* read version, probably 0 */
- read_reg(STRAP_REG);
- /* program primary drive */
- /* select Index-0 for Register-A */
- write_reg(0, MISC_REG);
- /* set read cycle timings */
- write_reg(cycle1, READ_REG);
- /* set write cycle timings */
- write_reg(cycle1, WRITE_REG);
+ /* check CLK speed */
+ clk = read_reg(STRAP_REG) & 1;
- /* program secondary drive */
- /* select Index-1 for Register-B */
- write_reg(1, MISC_REG);
+ printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33);
+
+ tim = data_rec_timings[clk][pio];
+ misc = addr_timings[clk][addr_pio];
+
+ /* select Index-0/1 for Register-A/B */
+ write_reg(drive->select.b.unit, MISC_REG);
/* set read cycle timings */
- write_reg(cycle2, READ_REG);
+ write_reg(tim, READ_REG);
/* set write cycle timings */
- write_reg(cycle2, WRITE_REG);
+ write_reg(tim, WRITE_REG);
/* use Register-A for drive 0 */
/* use Register-B for drive 1 */
@@ -319,45 +195,26 @@
spin_unlock_irqrestore(&opti621_lock, flags);
}
-static void __devinit opti621_port_init_devs(ide_hwif_t *hwif)
-{
- hwif->drives[0].drive_data = PIO_DONT_KNOW;
- hwif->drives[1].drive_data = PIO_DONT_KNOW;
-}
-
static const struct ide_port_ops opti621_port_ops = {
- .port_init_devs = opti621_port_init_devs,
.set_pio_mode = opti621_set_pio_mode,
};
-static const struct ide_port_info opti621_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "OPTI621",
- .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
- .port_ops = &opti621_port_ops,
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA,
- .pio_mask = ATA_PIO3,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
- }, { /* 1 */
- .name = "OPTI621X",
- .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
- .port_ops = &opti621_port_ops,
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA,
- .pio_mask = ATA_PIO3,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
- }
+static const struct ide_port_info opti621_chipset __devinitdata = {
+ .name = "OPTI621/X",
+ .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
+ .port_ops = &opti621_port_ops,
+ .host_flags = IDE_HFLAG_NO_DMA,
+ .pio_mask = ATA_PIO4,
};
static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- return ide_setup_pci_device(dev, &opti621_chipsets[id->driver_data]);
+ return ide_setup_pci_device(dev, &opti621_chipset);
}
static const struct pci_device_id opti621_pci_tbl[] = {
{ PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 },
- { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 1 },
+ { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, opti621_pci_tbl);
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 4b0b85d..e127eb2 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -569,6 +569,11 @@
{
struct ide_port_info d = sis5513_chipset;
u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
+ int rc;
+
+ rc = pci_enable_device(dev);
+ if (rc)
+ return rc;
if (sis_find_family(dev) == 0)
return -ENOTSUPP;
diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c
index f0e638d..236f9c3 100644
--- a/drivers/ide/ppc/mpc8xx.c
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -303,6 +303,8 @@
pcmp->pcmc_per = 0x100000 >> (16 * _slot_);
#endif /* CONFIG_IDE_8xx_PCCARD */
+ hw->chipset = ide_generic;
+
return 0;
}
#endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */
@@ -377,6 +379,8 @@
((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |=
(0x80000000 >> ioport_dsc[data_port].irq);
+ hw->chipset = ide_generic;
+
return 0;
}
#endif /* CONFIG_IDE_8xx_DIRECT */
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 48aa019..ba2d587 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -59,7 +59,6 @@
int irq;
int kind;
int aapl_bus_id;
- unsigned cable_80 : 1;
unsigned mediabay : 1;
unsigned broken_dma : 1;
unsigned broken_dma_warn : 1;
@@ -918,10 +917,40 @@
return 0;
}
+static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
+{
+ pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)ide_get_hwifdata(hwif);
+ struct device_node *np = pmif->node;
+ const char *cable = of_get_property(np, "cable-type", NULL);
+
+ /* Get cable type from device-tree. */
+ if (cable && !strncmp(cable, "80-", 3))
+ return ATA_CBL_PATA80;
+
+ /*
+ * G5's seem to have incorrect cable type in device-tree.
+ * Let's assume they have a 80 conductor cable, this seem
+ * to be always the case unless the user mucked around.
+ */
+ if (of_device_is_compatible(np, "K2-UATA") ||
+ of_device_is_compatible(np, "shasta-ata"))
+ return ATA_CBL_PATA80;
+
+ return ATA_CBL_PATA40;
+}
+
static const struct ide_port_ops pmac_ide_ata6_port_ops = {
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
.selectproc = pmac_ide_kauai_selectproc,
+ .cable_detect = pmac_ide_cable_detect,
+};
+
+static const struct ide_port_ops pmac_ide_ata4_port_ops = {
+ .set_pio_mode = pmac_ide_set_pio_mode,
+ .set_dma_mode = pmac_ide_set_dma_mode,
+ .selectproc = pmac_ide_selectproc,
+ .cable_detect = pmac_ide_cable_detect,
};
static const struct ide_port_ops pmac_ide_port_ops = {
@@ -949,10 +978,7 @@
/*
* Setup, register & probe an IDE channel driven by this driver, this is
- * called by one of the 2 probe functions (macio or PCI). Note that a channel
- * that ends up beeing free of any device is not kept around by this driver
- * (it is kept in 2.4). This introduce an interface numbering change on some
- * rare machines unfortunately, but it's better this way.
+ * called by one of the 2 probe functions (macio or PCI).
*/
static int __devinit
pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
@@ -962,7 +988,6 @@
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
struct ide_port_info d = pmac_port_info;
- pmif->cable_80 = 0;
pmif->broken_dma = pmif->broken_dma_warn = 0;
if (of_device_is_compatible(np, "shasta-ata")) {
pmif->kind = controller_sh_ata6;
@@ -979,6 +1004,7 @@
} else if (of_device_is_compatible(np, "keylargo-ata")) {
if (strcmp(np->name, "ata-4") == 0) {
pmif->kind = controller_kl_ata4;
+ d.port_ops = &pmac_ide_ata4_port_ops;
d.udma_mask = ATA_UDMA4;
} else
pmif->kind = controller_kl_ata3;
@@ -992,22 +1018,6 @@
bidp = of_get_property(np, "AAPL,bus-id", NULL);
pmif->aapl_bus_id = bidp ? *bidp : 0;
- /* Get cable type from device-tree */
- if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6
- || pmif->kind == controller_k2_ata6
- || pmif->kind == controller_sh_ata6) {
- const char* cable = of_get_property(np, "cable-type", NULL);
- if (cable && !strncmp(cable, "80-", 3))
- pmif->cable_80 = 1;
- }
- /* G5's seem to have incorrect cable type in device-tree. Let's assume
- * they have a 80 conductor cable, this seem to be always the case unless
- * the user mucked around
- */
- if (of_device_is_compatible(np, "K2-UATA") ||
- of_device_is_compatible(np, "shasta-ata"))
- pmif->cable_80 = 1;
-
/* On Kauai-type controllers, we make sure the FCR is correct */
if (pmif->kauai_fcr)
writel(KAUAI_FCR_UATA_MAGIC |
@@ -1053,7 +1063,6 @@
hwif->hwif_data = pmif;
ide_init_port_hw(hwif, hw);
- hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
@@ -1070,11 +1079,6 @@
}
}
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
- if (pmif->cable_80 == 0)
- d.udma_mask &= ATA_UDMA2;
-#endif
-
idx[0] = hwif->index;
ide_device_add(idx, &d);
diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig
index 545663e..95f45f9 100644
--- a/drivers/ieee1394/Kconfig
+++ b/drivers/ieee1394/Kconfig
@@ -4,7 +4,7 @@
source "drivers/firewire/Kconfig"
config IEEE1394
- tristate "IEEE 1394 (FireWire) support"
+ tristate "Stable FireWire stack"
depends on PCI || BROKEN
help
IEEE 1394 describes a high performance serial bus, which is also
@@ -19,30 +19,45 @@
To compile this driver as a module, say M here: the
module will be called ieee1394.
-comment "Subsystem Options"
- depends on IEEE1394
-
-config IEEE1394_VERBOSEDEBUG
- bool "Excessive debugging output"
- depends on IEEE1394
+config IEEE1394_OHCI1394
+ tristate "OHCI-1394 controllers"
+ depends on PCI && IEEE1394
help
- If you say Y here, you will get very verbose debugging logs from
- the subsystem which includes a dump of the header of every sent
- and received packet. This can amount to a high amount of data
- collected in a very short time which is usually also saved to
- disk by the system logging daemons.
+ Enable this driver if you have an IEEE 1394 controller based on the
+ OHCI-1394 specification. The current driver is only tested with OHCI
+ chipsets made by Texas Instruments and NEC. Most third-party vendors
+ use one of these chipsets. It should work with any OHCI-1394
+ compliant card, however.
- Say Y if you really want or need the debugging output, everyone
- else says N.
+ To compile this driver as a module, say M here: the
+ module will be called ohci1394.
-comment "Controllers"
- depends on IEEE1394
+ NOTE:
-comment "Texas Instruments PCILynx requires I2C"
+ You should only build either ohci1394 or the new firewire-ohci driver,
+ but not both. If you nevertheless want to install both, you should
+ configure them only as modules and blacklist the driver(s) which you
+ don't want to have auto-loaded. Add either
+
+ blacklist firewire-ohci
+ or
+ blacklist ohci1394
+ blacklist video1394
+ blacklist dv1394
+
+ to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf
+ depending on your distribution. The latter two modules should be
+ blacklisted together with ohci1394 because they depend on ohci1394.
+
+ If you have an old modprobe which doesn't implement the blacklist
+ directive, use "install modulename /bin/true" for the modules to be
+ blacklisted.
+
+comment "PCILynx controller requires I2C"
depends on IEEE1394 && I2C=n
config IEEE1394_PCILYNX
- tristate "Texas Instruments PCILynx support"
+ tristate "PCILynx controller"
depends on PCI && IEEE1394 && I2C
select I2C_ALGOBIT
help
@@ -57,35 +72,11 @@
PowerMacs G3 B&W contain the PCILynx controller. Therefore
almost everybody can say N here.
-config IEEE1394_OHCI1394
- tristate "OHCI-1394 support"
- depends on PCI && IEEE1394
- help
- Enable this driver if you have an IEEE 1394 controller based on the
- OHCI-1394 specification. The current driver is only tested with OHCI
- chipsets made by Texas Instruments and NEC. Most third-party vendors
- use one of these chipsets. It should work with any OHCI-1394
- compliant card, however.
-
- To compile this driver as a module, say M here: the
- module will be called ohci1394.
-
-comment "Protocols"
- depends on IEEE1394
-
-config IEEE1394_VIDEO1394
- tristate "OHCI-1394 Video support"
- depends on IEEE1394 && IEEE1394_OHCI1394
- help
- This option enables video device usage for OHCI-1394 cards. Enable
- this option only if you have an IEEE 1394 video device connected to
- an OHCI-1394 card.
-
comment "SBP-2 support (for storage devices) requires SCSI"
depends on IEEE1394 && SCSI=n
config IEEE1394_SBP2
- tristate "SBP-2 support (Harddisks etc.)"
+ tristate "Storage devices (SBP-2 protocol)"
depends on IEEE1394 && SCSI
help
This option enables you to use SBP-2 devices connected to an IEEE
@@ -127,24 +118,47 @@
The module is called eth1394 although it does not emulate Ethernet.
+config IEEE1394_RAWIO
+ tristate "raw1394 userspace interface"
+ depends on IEEE1394
+ help
+ This option adds support for the raw1394 device file which enables
+ direct communication of user programs with IEEE 1394 devices
+ (isochronous and asynchronous). Almost all application programs
+ which access FireWire require this option.
+
+ To compile this driver as a module, say M here: the module will be
+ called raw1394.
+
+config IEEE1394_VIDEO1394
+ tristate "video1394 userspace interface"
+ depends on IEEE1394 && IEEE1394_OHCI1394
+ help
+ This option adds support for the video1394 device files which enable
+ isochronous communication of user programs with IEEE 1394 devices,
+ especially video capture or export. This interface is used by all
+ libdc1394 based programs and by several other programs, in addition to
+ the raw1394 interface. It is generally not required for DV capture.
+
+ To compile this driver as a module, say M here: the module will be
+ called video1394.
+
config IEEE1394_DV1394
- tristate "OHCI-DV I/O support (deprecated)"
+ tristate "dv1394 userspace interface (deprecated)"
depends on IEEE1394 && IEEE1394_OHCI1394
help
The dv1394 driver is unsupported and may be removed from Linux in a
future release. Its functionality is now provided by raw1394 together
with libraries such as libiec61883.
-config IEEE1394_RAWIO
- tristate "Raw IEEE1394 I/O support"
+config IEEE1394_VERBOSEDEBUG
+ bool "Excessive debugging output"
depends on IEEE1394
help
- This option adds support for the raw1394 device file which enables
- direct communication of user programs with the IEEE 1394 bus and thus
- with the attached peripherals. Almost all application programs which
- access FireWire require this option.
+ If you say Y here, you will get very verbose debugging logs from the
+ ieee1394 drivers, including sent and received packet headers. This
+ will quickly result in large amounts of data sent to the system log.
- To compile this driver as a module, say M here: the module will be
- called raw1394.
+ Say Y if you really need the debugging output. Everyone else says N.
endmenu
diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index fe78f7d..a1768db 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -150,7 +150,7 @@
ret = 0;
while (npages) {
ret = get_user_pages(current, current->mm, cur_base,
- min_t(int, npages,
+ min_t(unsigned long, npages,
PAGE_SIZE / sizeof (struct page *)),
1, !umem->writable, page_list, vma_list);
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index f806da1..caed42b 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -423,7 +423,7 @@
unsigned long flags;
spin_lock_irqsave(&file->async_file->lock, flags);
- if (!file->async_file->is_closed) {
+ if (file->async_file->is_closed) {
spin_unlock_irqrestore(&file->async_file->lock, flags);
return;
}
diff --git a/drivers/infiniband/hw/amso1100/c2_rnic.c b/drivers/infiniband/hw/amso1100/c2_rnic.c
index 9a054c6..b1441aeb 100644
--- a/drivers/infiniband/hw/amso1100/c2_rnic.c
+++ b/drivers/infiniband/hw/amso1100/c2_rnic.c
@@ -455,8 +455,7 @@
IB_DEVICE_CURR_QP_STATE_MOD |
IB_DEVICE_SYS_IMAGE_GUID |
IB_DEVICE_ZERO_STAG |
- IB_DEVICE_MEM_WINDOW |
- IB_DEVICE_SEND_W_INV);
+ IB_DEVICE_MEM_WINDOW);
/* Allocate the qptr_array */
c2dev->qptr_array = vmalloc(C2_MAX_CQS * sizeof(void *));
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index 8934178..95f82cf 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -1096,7 +1096,9 @@
struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev;
PDBG("%s dev 0x%p\n", __func__, dev);
+ rtnl_lock();
lldev->ethtool_ops->get_drvinfo(lldev, &info);
+ rtnl_unlock();
return sprintf(buf, "%s\n", info.fw_version);
}
@@ -1109,7 +1111,9 @@
struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev;
PDBG("%s dev 0x%p\n", __func__, dev);
+ rtnl_lock();
lldev->ethtool_ops->get_drvinfo(lldev, &info);
+ rtnl_unlock();
return sprintf(buf, "%s\n", info.driver);
}
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index bbe0436..f093b00 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -421,8 +421,10 @@
int ret = 0;
unsigned long flags;
- if (unlikely(my_qp->state != IB_QPS_RTS)) {
- ehca_err(qp->device, "QP not in RTS state qpn=%x", qp->qp_num);
+ /* Reject WR if QP is in RESET, INIT or RTR state */
+ if (unlikely(my_qp->state < IB_QPS_RTS)) {
+ ehca_err(qp->device, "Invalid QP state qp_state=%d qpn=%x",
+ my_qp->state, qp->qp_num);
return -EINVAL;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 59a8b25..0bd8bcb 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -232,6 +232,11 @@
#define IPATH_SDMA_TXREQ_S_ABORTED 2
#define IPATH_SDMA_TXREQ_S_SHUTDOWN 3
+#define IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG (1ull << 63)
+#define IPATH_SDMA_STATUS_ABORT_IN_PROG (1ull << 62)
+#define IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE (1ull << 61)
+#define IPATH_SDMA_STATUS_SCB_EMPTY (1ull << 30)
+
/* max dwords in small buffer packet */
#define IPATH_SMALLBUF_DWORDS (dd->ipath_piosize2k >> 2)
diff --git a/drivers/infiniband/hw/ipath/ipath_mad.c b/drivers/infiniband/hw/ipath/ipath_mad.c
index 1ff46ae..5f9315d 100644
--- a/drivers/infiniband/hw/ipath/ipath_mad.c
+++ b/drivers/infiniband/hw/ipath/ipath_mad.c
@@ -1492,6 +1492,10 @@
goto bail;
}
+ case IB_MGMT_METHOD_TRAP:
+ case IB_MGMT_METHOD_REPORT:
+ case IB_MGMT_METHOD_REPORT_RESP:
+ case IB_MGMT_METHOD_TRAP_REPRESS:
case IB_MGMT_METHOD_GET_RESP:
/*
* The ib_mad module will call us to process responses
diff --git a/drivers/infiniband/hw/ipath/ipath_sdma.c b/drivers/infiniband/hw/ipath/ipath_sdma.c
index 0a8c1b8..eaba032 100644
--- a/drivers/infiniband/hw/ipath/ipath_sdma.c
+++ b/drivers/infiniband/hw/ipath/ipath_sdma.c
@@ -263,14 +263,10 @@
hwstatus = ipath_read_kreg64(dd,
dd->ipath_kregs->kr_senddmastatus);
- if (/* ScoreBoardDrainInProg */
- test_bit(63, &hwstatus) ||
- /* AbortInProg */
- test_bit(62, &hwstatus) ||
- /* InternalSDmaEnable */
- test_bit(61, &hwstatus) ||
- /* ScbEmpty */
- !test_bit(30, &hwstatus)) {
+ if ((hwstatus & (IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG |
+ IPATH_SDMA_STATUS_ABORT_IN_PROG |
+ IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE)) ||
+ !(hwstatus & IPATH_SDMA_STATUS_SCB_EMPTY)) {
if (dd->ipath_sdma_reset_wait > 0) {
/* not done shutting down sdma */
--dd->ipath_sdma_reset_wait;
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c
index e0ec540..7779165 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.c
@@ -1494,7 +1494,8 @@
props->device_cap_flags = IB_DEVICE_BAD_PKEY_CNTR |
IB_DEVICE_BAD_QKEY_CNTR | IB_DEVICE_SHUTDOWN_PORT |
- IB_DEVICE_SYS_IMAGE_GUID;
+ IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_RC_RNR_NAK_GEN |
+ IB_DEVICE_PORT_ACTIVE_EVENT | IB_DEVICE_SRQ_RESIZE;
props->page_size_cap = PAGE_SIZE;
props->vendor_id = dev->dd->ipath_vendorid;
props->vendor_part_id = dev->dd->ipath_deviceid;
diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c
index b224079..d5862e5 100644
--- a/drivers/infiniband/hw/mthca/mthca_memfree.c
+++ b/drivers/infiniband/hw/mthca/mthca_memfree.c
@@ -109,7 +109,11 @@
{
struct page *page;
- page = alloc_pages(gfp_mask, order);
+ /*
+ * Use __GFP_ZERO because buggy firmware assumes ICM pages are
+ * cleared, and subtle failures are seen if they aren't.
+ */
+ page = alloc_pages(gfp_mask | __GFP_ZERO, order);
if (!page)
return -ENOMEM;
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 99b3c4a..d617da9 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -2456,10 +2456,8 @@
if ((page_count!=0)&&(page_count<<12)-(region->offset&(4096-1))>=region->length)
goto enough_pages;
if ((page_count&0x01FF) == 0) {
- if (page_count>(1024*512)) {
+ if (page_count >= 1024 * 512) {
ib_umem_release(region);
- pci_free_consistent(nesdev->pcidev, 4096, vpbl.pbl_vbase,
- vpbl.pbl_pbase);
nes_free_resource(nesadapter,
nesadapter->allocated_mrs, stag_index);
kfree(nesmr);
diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c
index eebc724..72c63e5 100644
--- a/drivers/input/ff-core.c
+++ b/drivers/input/ff-core.c
@@ -28,6 +28,7 @@
#include <linux/input.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/sched.h>
/*
* Check that the effect_id is a valid effect and whether the user
@@ -166,8 +167,10 @@
if (ret)
goto out;
+ spin_lock_irq(&dev->event_lock);
ff->effects[id] = *effect;
ff->effect_owners[id] = file;
+ spin_unlock_irq(&dev->event_lock);
out:
mutex_unlock(&ff->mutex);
@@ -189,15 +192,21 @@
if (error)
return error;
+ spin_lock_irq(&dev->event_lock);
ff->playback(dev, effect_id, 0);
+ ff->effect_owners[effect_id] = NULL;
+ spin_unlock_irq(&dev->event_lock);
if (ff->erase) {
error = ff->erase(dev, effect_id);
- if (error)
- return error;
- }
+ if (error) {
+ spin_lock_irq(&dev->event_lock);
+ ff->effect_owners[effect_id] = file;
+ spin_unlock_irq(&dev->event_lock);
- ff->effect_owners[effect_id] = NULL;
+ return error;
+ }
+ }
return 0;
}
@@ -263,8 +272,6 @@
if (type != EV_FF)
return 0;
- mutex_lock(&ff->mutex);
-
switch (code) {
case FF_GAIN:
if (!test_bit(FF_GAIN, dev->ffbit) || value > 0xffff)
@@ -286,7 +293,6 @@
break;
}
- mutex_unlock(&ff->mutex);
return 0;
}
EXPORT_SYMBOL_GPL(input_ff_event);
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 4a95adc..af58a6f 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -807,6 +807,8 @@
static void atkbd_cleanup(struct serio *serio)
{
struct atkbd *atkbd = serio_get_drvdata(serio);
+
+ atkbd_disable(atkbd);
ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_BAT);
}
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 3dea0c5..45767e7 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -136,6 +136,9 @@
set_bit(code, input_dev->keybit);
}
+ for (i = 0; i < pdata->direct_key_num; i++)
+ set_bit(pdata->direct_key_map[i], input_dev->keybit);
+
keypad->rotary_up_key[0] = pdata->rotary0_up_key;
keypad->rotary_up_key[1] = pdata->rotary1_up_key;
keypad->rotary_down_key[0] = pdata->rotary0_down_key;
@@ -143,17 +146,21 @@
keypad->rotary_rel_code[0] = pdata->rotary0_rel_code;
keypad->rotary_rel_code[1] = pdata->rotary1_rel_code;
- if (pdata->rotary0_up_key && pdata->rotary0_down_key) {
- set_bit(pdata->rotary0_up_key, input_dev->keybit);
- set_bit(pdata->rotary0_down_key, input_dev->keybit);
- } else
- set_bit(pdata->rotary0_rel_code, input_dev->relbit);
+ if (pdata->enable_rotary0) {
+ if (pdata->rotary0_up_key && pdata->rotary0_down_key) {
+ set_bit(pdata->rotary0_up_key, input_dev->keybit);
+ set_bit(pdata->rotary0_down_key, input_dev->keybit);
+ } else
+ set_bit(pdata->rotary0_rel_code, input_dev->relbit);
+ }
- if (pdata->rotary1_up_key && pdata->rotary1_down_key) {
- set_bit(pdata->rotary1_up_key, input_dev->keybit);
- set_bit(pdata->rotary1_down_key, input_dev->keybit);
- } else
- set_bit(pdata->rotary1_rel_code, input_dev->relbit);
+ if (pdata->enable_rotary1) {
+ if (pdata->rotary1_up_key && pdata->rotary1_down_key) {
+ set_bit(pdata->rotary1_up_key, input_dev->keybit);
+ set_bit(pdata->rotary1_down_key, input_dev->keybit);
+ } else
+ set_bit(pdata->rotary1_rel_code, input_dev->relbit);
+ }
}
static inline unsigned int lookup_matrix_keycode(
@@ -484,8 +491,13 @@
keypad->input_dev = input_dev;
input_set_drvdata(input_dev, keypad);
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
- BIT_MASK(EV_REL);
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ if ((keypad->pdata->enable_rotary0 &&
+ keypad->pdata->rotary0_rel_code) ||
+ (keypad->pdata->enable_rotary1 &&
+ keypad->pdata->rotary1_rel_code)) {
+ input_dev->evbit[0] |= BIT_MASK(EV_REL);
+ }
pxa27x_keypad_build_keycode(keypad);
platform_set_drvdata(pdev, keypad);
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 3ad8bd9..432699d 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -15,7 +15,6 @@
config INPUT_PCSPKR
tristate "PC Speaker support"
depends on PCSPKR_PLATFORM
- depends on SND_PCSP=n
help
Say Y here if you want the standard PC Speaker to be used for
bells and whistles.
diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c
index 9531d8c..d82f7f7 100644
--- a/drivers/input/misc/apanel.c
+++ b/drivers/input/misc/apanel.c
@@ -20,7 +20,6 @@
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/io.h>
-#include <linux/module.h>
#include <linux/input-polldev.h>
#include <linux/i2c.h>
#include <linux/workqueue.h>
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 8dd3942..ce6fdec 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -589,6 +589,21 @@
dev->open = 0;
}
+static int atp_handle_geyser(struct atp *dev)
+{
+ struct usb_device *udev = dev->udev;
+
+ if (!atp_is_fountain(dev)) {
+ /* switch to raw sensor mode */
+ if (atp_geyser_init(udev))
+ return -EIO;
+
+ printk(KERN_INFO "appletouch: Geyser mode initialized.\n");
+ }
+
+ return 0;
+}
+
static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id)
{
struct atp *dev;
@@ -633,14 +648,6 @@
else
dev->datalen = 81;
- if (!atp_is_fountain(dev)) {
- /* switch to raw sensor mode */
- if (atp_geyser_init(udev))
- goto err_free_devs;
-
- printk(KERN_INFO "appletouch: Geyser mode initialized.\n");
- }
-
dev->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->urb)
goto err_free_devs;
@@ -654,6 +661,10 @@
usb_rcvintpipe(udev, int_in_endpointAddr),
dev->data, dev->datalen, atp_complete, dev, 1);
+ error = atp_handle_geyser(dev);
+ if (error)
+ goto err_free_buffer;
+
usb_make_path(udev, dev->phys, sizeof(dev->phys));
strlcat(dev->phys, "/input0", sizeof(dev->phys));
@@ -744,6 +755,20 @@
printk(KERN_INFO "input: appletouch disconnected\n");
}
+static int atp_recover(struct atp *dev)
+{
+ int error;
+
+ error = atp_handle_geyser(dev);
+ if (error)
+ return error;
+
+ if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC))
+ return -EIO;
+
+ return 0;
+}
+
static int atp_suspend(struct usb_interface *iface, pm_message_t message)
{
struct atp *dev = usb_get_intfdata(iface);
@@ -764,12 +789,20 @@
return 0;
}
+static int atp_reset_resume(struct usb_interface *iface)
+{
+ struct atp *dev = usb_get_intfdata(iface);
+
+ return atp_recover(dev);
+}
+
static struct usb_driver atp_driver = {
.name = "appletouch",
.probe = atp_probe,
.disconnect = atp_disconnect,
.suspend = atp_suspend,
.resume = atp_resume,
+ .reset_resume = atp_reset_resume,
.id_table = atp_table,
};
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 5ece9f5..78eb784 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -193,6 +193,13 @@
},
},
{
+ .ident = "Fujitsu-Siemens Amilo Pro 2030",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+ },
+ },
+ {
/*
* No data is coming from the touchscreen unless KBC
* is in legacy mode.
@@ -331,6 +338,13 @@
},
},
{
+ .ident = "Acer TravelMate 660",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"),
+ },
+ },
+ {
.ident = "Acer TravelMate 2490",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 65a74cf..170f71e 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -885,6 +885,20 @@
#undef DELAY
+#ifdef CONFIG_X86
+static void i8042_dritek_enable(void)
+{
+ char param = 0x90;
+ int error;
+
+ error = i8042_command(¶m, 0x1059);
+ if (error)
+ printk(KERN_WARNING
+ "Failed to enable DRITEK extension: %d\n",
+ error);
+}
+#endif
+
#ifdef CONFIG_PM
/*
* Here we try to restore the original BIOS settings. We only want to
@@ -938,10 +952,20 @@
i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
- printk(KERN_ERR "i8042: Can't write CTR to resume\n");
- return -EIO;
+ printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n");
+ msleep(50);
+ if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+ printk(KERN_ERR "i8042: CTR write retry failed\n");
+ return -EIO;
+ }
}
+
+#ifdef CONFIG_X86
+ if (i8042_dritek)
+ i8042_dritek_enable();
+#endif
+
if (i8042_mux_present) {
if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
printk(KERN_WARNING
@@ -1160,6 +1184,11 @@
if (error)
return error;
+#ifdef CONFIG_X86
+ if (i8042_dritek)
+ i8042_dritek_enable();
+#endif
+
if (!i8042_noaux) {
error = i8042_setup_aux();
if (error && error != -ENODEV && error != -EBUSY)
@@ -1171,14 +1200,6 @@
if (error)
goto out_fail;
}
-#ifdef CONFIG_X86
- if (i8042_dritek) {
- char param = 0x90;
- error = i8042_command(¶m, 0x1059);
- if (error)
- goto out_fail;
- }
-#endif
/*
* Ok, everything is ready, let's register all serio ports
*/
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index c5a8661..1e748e4 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -830,7 +830,7 @@
struct gtco *gtco;
struct input_dev *input_dev;
struct hid_descriptor *hid_desc;
- char *report = NULL;
+ char *report;
int result = 0, retry;
int error;
struct usb_endpoint_descriptor *endpoint;
@@ -916,12 +916,16 @@
le16_to_cpu(hid_desc->wDescriptorLength),
5000); /* 5 secs */
- if (result == le16_to_cpu(hid_desc->wDescriptorLength))
+ dbg("usb_control_msg result: %d", result);
+ if (result == le16_to_cpu(hid_desc->wDescriptorLength)) {
+ parse_hid_report_descriptor(gtco, report, result);
break;
+ }
}
+ kfree(report);
+
/* If we didn't get the report, fail */
- dbg("usb_control_msg result: :%d", result);
if (result != le16_to_cpu(hid_desc->wDescriptorLength)) {
err("Failed to get HID Report Descriptor of size: %d",
hid_desc->wDescriptorLength);
@@ -929,12 +933,6 @@
goto err_free_urb;
}
- /* Now we parse the report */
- parse_hid_report_descriptor(gtco, report, result);
-
- /* Now we delete it */
- kfree(report);
-
/* Create a device file node */
usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath));
strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath));
@@ -988,7 +986,6 @@
usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE,
gtco->buffer, gtco->buf_dma);
err_free_devs:
- kfree(report);
input_free_device(input_dev);
kfree(gtco);
return error;
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 01278bd..8384587 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -85,6 +85,15 @@
MODULE_PARM_DESC(delay, "Set adc sample delay.");
/*
+ * Set five_wire = 1 to use a 5 wire touchscreen.
+ *
+ * NOTE: Five wire mode does not allow for readback of pressure.
+ */
+static int five_wire;
+module_param(five_wire, int, 0);
+MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen.");
+
+/*
* Set adc mask function.
*
* Sources of glitch noise, such as signals driving an LCD display, may feed
@@ -162,6 +171,19 @@
64000 / rpu);
}
+ /* Five wire panel? */
+ if (five_wire) {
+ dig3 |= WM9713_45W;
+ dev_info(wm->dev, "setting 5-wire touchscreen mode.");
+
+ if (pil) {
+ dev_warn(wm->dev,
+ "Pressure measurement not supported in 5 "
+ "wire mode, disabling\n");
+ pil = 0;
+ }
+ }
+
/* touchpanel pressure */
if (pil == 2) {
dig3 |= WM9712_PIL;
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index e9c7ea4..cdc24ad 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -608,6 +608,17 @@
goto alloc_err;
}
+ /* set up physical characteristics */
+ wm->codec->phy_init(wm);
+
+ /* load gpio cache */
+ wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
+ wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
+ wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
+ wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
+ wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
+ wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
+
wm->input_dev = input_allocate_device();
if (wm->input_dev == NULL) {
ret = -ENOMEM;
@@ -616,6 +627,7 @@
/* set up touch configuration */
wm->input_dev->name = "wm97xx touchscreen";
+ wm->input_dev->phys = "wm97xx";
wm->input_dev->open = wm97xx_ts_input_open;
wm->input_dev->close = wm97xx_ts_input_close;
set_bit(EV_ABS, wm->input_dev->evbit);
@@ -634,17 +646,6 @@
if (ret < 0)
goto dev_alloc_err;
- /* set up physical characteristics */
- wm->codec->phy_init(wm);
-
- /* load gpio cache */
- wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
- wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
- wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
- wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
- wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
- wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
-
/* register our battery device */
wm->battery_dev = platform_device_alloc("wm97xx-battery", -1);
if (!wm->battery_dev) {
@@ -801,7 +802,7 @@
EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops);
static struct device_driver wm97xx_driver = {
- .name = "ac97",
+ .name = "wm97xx-ts",
.bus = &ac97_bus_type,
.owner = THIS_MODULE,
.probe = wm97xx_probe,
diff --git a/drivers/isdn/hardware/eicon/divasmain.c b/drivers/isdn/hardware/eicon/divasmain.c
index 5fcbdcc..16a874b 100644
--- a/drivers/isdn/hardware/eicon/divasmain.c
+++ b/drivers/isdn/hardware/eicon/divasmain.c
@@ -806,7 +806,6 @@
if (!create_divas_proc()) {
#ifdef MODULE
- remove_divas_proc();
divas_unregister_chrdev();
divasfunc_exit();
#endif
diff --git a/drivers/isdn/hardware/eicon/divasproc.c b/drivers/isdn/hardware/eicon/divasproc.c
index fae8958..0408272 100644
--- a/drivers/isdn/hardware/eicon/divasproc.c
+++ b/drivers/isdn/hardware/eicon/divasproc.c
@@ -125,8 +125,8 @@
int create_divas_proc(void)
{
- proc_create(divas_proc_name, S_IFREG | S_IRUGO, proc_net_eicon,
- &divas_fops);
+ divas_proc_entry = proc_create(divas_proc_name, S_IFREG | S_IRUGO,
+ proc_net_eicon, &divas_fops);
if (!divas_proc_entry)
return (0);
diff --git a/drivers/isdn/hysdn/hysdn_procconf.c b/drivers/isdn/hysdn/hysdn_procconf.c
index 15906d0..484299b 100644
--- a/drivers/isdn/hysdn/hysdn_procconf.c
+++ b/drivers/isdn/hysdn/hysdn_procconf.c
@@ -207,30 +207,17 @@
/* read conf file -> output card info data */
/*******************************************/
static ssize_t
-hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t * off)
+hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t *off)
{
char *cp;
- int i;
- if (file->f_mode & FMODE_READ) {
- if (!(cp = file->private_data))
- return (-EFAULT); /* should never happen */
- i = strlen(cp); /* get total string length */
- if (*off < i) {
- /* still bytes to transfer */
- cp += *off; /* point to desired data offset */
- i -= *off; /* remaining length */
- if (i > count)
- i = count; /* limit length to transfer */
- if (copy_to_user(buf, cp, i))
- return (-EFAULT); /* copy error */
- *off += i; /* adjust offset */
- } else
- return (0);
- } else
- return (-EPERM); /* no permission to read */
+ if (!(file->f_mode & FMODE_READ))
+ return -EPERM; /* no permission to read */
- return (i);
+ if (!(cp = file->private_data))
+ return -EFAULT; /* should never happen */
+
+ return simple_read_from_buffer(buf, count, off, cp, strlen(cp));
} /* hysdn_conf_read */
/******************/
diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c
index 0f3c66d..8d8c6b7 100644
--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -1977,8 +1977,10 @@
if (!skb)
return -ENOMEM;
skb_reserve(skb, hl);
- if (copy_from_user(skb_put(skb, len), buf, len))
+ if (copy_from_user(skb_put(skb, len), buf, len)) {
+ dev_kfree_skb(skb);
return -EFAULT;
+ }
ret = dev->drv[drvidx]->interface->writebuf_skb(drvidx, chan, 1, skb);
if (ret <= 0)
dev_kfree_skb(skb);
diff --git a/drivers/isdn/sc/ioctl.c b/drivers/isdn/sc/ioctl.c
index 7817d22..1081091 100644
--- a/drivers/isdn/sc/ioctl.c
+++ b/drivers/isdn/sc/ioctl.c
@@ -226,6 +226,7 @@
*/
if (copy_from_user(spid, data->dataptr, SCIOC_SPIDSIZE)) {
kfree(rcvmsg);
+ kfree(spid);
return -EFAULT;
}
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 8080249..1a8de57 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -20,14 +20,11 @@
/* The pointer to our (page) of device descriptions. */
static void *lguest_devices;
-/* Unique numbering for lguest devices. */
-static unsigned int dev_index;
-
/* For Guests, device memory can be used as normal memory, so we cast away the
* __iomem to quieten sparse. */
static inline void *lguest_map(unsigned long phys_addr, unsigned long pages)
{
- return (__force void *)ioremap(phys_addr, PAGE_SIZE*pages);
+ return (__force void *)ioremap_cache(phys_addr, PAGE_SIZE*pages);
}
static inline void lguest_unmap(void *addr)
@@ -325,8 +322,10 @@
* As Andrew Tridgell says, "Untested code is buggy code".
*
* It's worth reading this carefully: we start with a pointer to the new device
- * descriptor in the "lguest_devices" page. */
-static void add_lguest_device(struct lguest_device_desc *d)
+ * descriptor in the "lguest_devices" page, and the offset into the device
+ * descriptor page so we can uniquely identify it if things go badly wrong. */
+static void add_lguest_device(struct lguest_device_desc *d,
+ unsigned int offset)
{
struct lguest_device *ldev;
@@ -334,18 +333,14 @@
* it. */
ldev = kzalloc(sizeof(*ldev), GFP_KERNEL);
if (!ldev) {
- printk(KERN_EMERG "Cannot allocate lguest dev %u\n",
- dev_index++);
+ printk(KERN_EMERG "Cannot allocate lguest dev %u type %u\n",
+ offset, d->type);
return;
}
/* This devices' parent is the lguest/ dir. */
ldev->vdev.dev.parent = &lguest_root;
/* We have a unique device index thanks to the dev_index counter. */
- ldev->vdev.index = dev_index++;
- /* The device type comes straight from the descriptor. There's also a
- * device vendor field in the virtio_device struct, which we leave as
- * 0. */
ldev->vdev.id.device = d->type;
/* We have a simple set of routines for querying the device's
* configuration information and setting its status. */
@@ -357,8 +352,8 @@
* virtio_device and calls device_register(). This makes the bus
* infrastructure look for a matching driver. */
if (register_virtio_device(&ldev->vdev) != 0) {
- printk(KERN_ERR "Failed to register lguest device %u\n",
- ldev->vdev.index);
+ printk(KERN_ERR "Failed to register lguest dev %u type %u\n",
+ offset, d->type);
kfree(ldev);
}
}
@@ -379,7 +374,7 @@
break;
printk("Device at %i has size %u\n", i, desc_size(d));
- add_lguest_device(d);
+ add_lguest_device(d, i);
}
}
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index 5126d5d..2e554a4 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -176,7 +176,7 @@
* we set it now, so we can trap and pass that trap to the Guest if it
* uses the FPU. */
if (cpu->ts)
- lguest_set_ts();
+ unlazy_fpu(current);
/* SYSENTER is an optimized way of doing system calls. We can't allow
* it because it always jumps to privilege level 0. A normal Guest
@@ -196,6 +196,10 @@
* trap made the switcher code come back, and an error code which some
* traps set. */
+ /* Restore SYSENTER if it's supposed to be on. */
+ if (boot_cpu_has(X86_FEATURE_SEP))
+ wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
+
/* If the Guest page faulted, then the cr2 register will tell us the
* bad virtual address. We have to grab this now, because once we
* re-enable interrupts an interrupt could fault and thus overwrite
@@ -203,13 +207,12 @@
if (cpu->regs->trapnum == 14)
cpu->arch.last_pagefault = read_cr2();
/* Similarly, if we took a trap because the Guest used the FPU,
- * we have to restore the FPU it expects to see. */
+ * we have to restore the FPU it expects to see.
+ * math_state_restore() may sleep and we may even move off to
+ * a different CPU. So all the critical stuff should be done
+ * before this. */
else if (cpu->regs->trapnum == 7)
math_state_restore();
-
- /* Restore SYSENTER if it's supposed to be on. */
- if (boot_cpu_has(X86_FEATURE_SEP))
- wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
}
/*H:130 Now we've examined the hypercall code; our Guest can make requests.
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index 82add26..818aba36 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -84,7 +84,7 @@
int cd_irq;
int cd_retry;
#endif
-#if defined(CONFIG_BLK_DEV_IDE_PMAC) || defined(CONFIG_MAC_FLOPPY)
+#if defined(CONFIG_BLK_DEV_IDE_PMAC)
int cd_index;
#endif
};
@@ -417,6 +417,7 @@
}
}
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
int check_media_bay(struct device_node *which_bay, int what)
{
int i;
@@ -432,7 +433,6 @@
}
EXPORT_SYMBOL(check_media_bay);
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
int check_media_bay_by_base(unsigned long base, int what)
{
int i;
@@ -556,7 +556,8 @@
printk("mediabay %d, registering IDE...\n", i);
pmu_suspend();
ide_port_scan(bay->cd_port);
- bay->cd_index = bay->cd_port->index;
+ if (bay->cd_port->present)
+ bay->cd_index = bay->cd_port->index;
pmu_resume();
}
if (bay->cd_index == -1) {
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index 77ad192..d86d57a 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -483,12 +483,15 @@
if (smu_cmdbuf_abs == 0) {
printk(KERN_ERR "SMU: Command buffer not allocated !\n");
+ of_node_put(np);
return -EINVAL;
}
smu = alloc_bootmem(sizeof(struct smu_device));
- if (smu == NULL)
+ if (smu == NULL) {
+ of_node_put(np);
return -ENOMEM;
+ }
memset(smu, 0, sizeof(*smu));
spin_lock_init(&smu->lock);
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 54f4942..5366dc93 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -562,18 +562,24 @@
therm_type = ADT7460;
else if (of_device_is_compatible(np, "adt7467"))
therm_type = ADT7467;
- else
+ else {
+ of_node_put(np);
return -ENODEV;
+ }
prop = of_get_property(np, "hwsensor-params-version", NULL);
printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop,
(*prop == 1)?"":"un");
- if (*prop != 1)
+ if (*prop != 1) {
+ of_node_put(np);
return -ENODEV;
+ }
prop = of_get_property(np, "reg", NULL);
- if (!prop)
+ if (!prop) {
+ of_node_put(np);
return -ENODEV;
+ }
/* look for bus either by path or using "reg" */
if (strstr(np->full_name, "/i2c-bus@") != NULL) {
@@ -610,6 +616,7 @@
if (of_dev == NULL) {
printk(KERN_ERR "Can't register temperatures device !\n");
+ of_node_put(np);
return -ENODEV;
}
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 835def1..ab6a61d 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -432,6 +432,7 @@
case 0:
atomic_dec(&ctx->pending);
ctx->sector++;
+ cond_resched();
continue;
/* error */
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 1074824..6a866d7 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -50,17 +50,19 @@
/**
* linear_mergeable_bvec -- tell bio layer if two requests can be merged
* @q: request queue
- * @bio: the buffer head that's been built up so far
+ * @bvm: properties of new bio
* @biovec: the request that could be merged to it.
*
* Return amount of bytes we can take at this offset
*/
-static int linear_mergeable_bvec(struct request_queue *q, struct bio *bio, struct bio_vec *biovec)
+static int linear_mergeable_bvec(struct request_queue *q,
+ struct bvec_merge_data *bvm,
+ struct bio_vec *biovec)
{
mddev_t *mddev = q->queuedata;
dev_info_t *dev0;
- unsigned long maxsectors, bio_sectors = bio->bi_size >> 9;
- sector_t sector = bio->bi_sector + get_start_sect(bio->bi_bdev);
+ unsigned long maxsectors, bio_sectors = bvm->bi_size >> 9;
+ sector_t sector = bvm->bi_sector + get_start_sect(bvm->bi_bdev);
dev0 = which_dev(mddev, sector);
maxsectors = (dev0->size << 1) - (sector - (dev0->offset<<1));
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 51c19f8..2580ac1 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -276,6 +276,7 @@
atomic_set(&new->active, 1);
spin_lock_init(&new->write_lock);
init_waitqueue_head(&new->sb_wait);
+ init_waitqueue_head(&new->recovery_wait);
new->reshape_position = MaxSector;
new->resync_max = MaxSector;
new->level = LEVEL_NONE;
@@ -3896,8 +3897,10 @@
md_probe(dev, NULL, NULL);
mddev = mddev_find(dev);
- if (!mddev) {
- printk(KERN_ERR
+ if (!mddev || !mddev->gendisk) {
+ if (mddev)
+ mddev_put(mddev);
+ printk(KERN_ERR
"md: cannot allocate memory for md drive.\n");
break;
}
@@ -5665,7 +5668,6 @@
window/2,(unsigned long long) max_sectors/2);
atomic_set(&mddev->recovery_active, 0);
- init_waitqueue_head(&mddev->recovery_wait);
last_check = 0;
if (j>2) {
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 914c04d..bcbb825 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -241,18 +241,20 @@
/**
* raid0_mergeable_bvec -- tell bio layer if a two requests can be merged
* @q: request queue
- * @bio: the buffer head that's been built up so far
+ * @bvm: properties of new bio
* @biovec: the request that could be merged to it.
*
* Return amount of bytes we can accept at this offset
*/
-static int raid0_mergeable_bvec(struct request_queue *q, struct bio *bio, struct bio_vec *biovec)
+static int raid0_mergeable_bvec(struct request_queue *q,
+ struct bvec_merge_data *bvm,
+ struct bio_vec *biovec)
{
mddev_t *mddev = q->queuedata;
- sector_t sector = bio->bi_sector + get_start_sect(bio->bi_bdev);
+ sector_t sector = bvm->bi_sector + get_start_sect(bvm->bi_bdev);
int max;
unsigned int chunk_sectors = mddev->chunk_size >> 9;
- unsigned int bio_sectors = bio->bi_size >> 9;
+ unsigned int bio_sectors = bvm->bi_size >> 9;
max = (chunk_sectors - ((sector & (chunk_sectors - 1)) + bio_sectors)) << 9;
if (max < 0) max = 0; /* bio_add cannot handle a negative return */
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 1de17da..22bb2b1 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -439,26 +439,27 @@
/**
* raid10_mergeable_bvec -- tell bio layer if a two requests can be merged
* @q: request queue
- * @bio: the buffer head that's been built up so far
+ * @bvm: properties of new bio
* @biovec: the request that could be merged to it.
*
* Return amount of bytes we can accept at this offset
* If near_copies == raid_disk, there are no striping issues,
* but in that case, the function isn't called at all.
*/
-static int raid10_mergeable_bvec(struct request_queue *q, struct bio *bio,
- struct bio_vec *bio_vec)
+static int raid10_mergeable_bvec(struct request_queue *q,
+ struct bvec_merge_data *bvm,
+ struct bio_vec *biovec)
{
mddev_t *mddev = q->queuedata;
- sector_t sector = bio->bi_sector + get_start_sect(bio->bi_bdev);
+ sector_t sector = bvm->bi_sector + get_start_sect(bvm->bi_bdev);
int max;
unsigned int chunk_sectors = mddev->chunk_size >> 9;
- unsigned int bio_sectors = bio->bi_size >> 9;
+ unsigned int bio_sectors = bvm->bi_size >> 9;
max = (chunk_sectors - ((sector & (chunk_sectors - 1)) + bio_sectors)) << 9;
if (max < 0) max = 0; /* bio_add cannot handle a negative return */
- if (max <= bio_vec->bv_len && bio_sectors == 0)
- return bio_vec->bv_len;
+ if (max <= biovec->bv_len && bio_sectors == 0)
+ return biovec->bv_len;
else
return max;
}
@@ -2137,6 +2138,8 @@
!test_bit(In_sync, &disk->rdev->flags)) {
disk->head_position = 0;
mddev->degraded++;
+ if (disk->rdev)
+ conf->fullsync = 1;
}
}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 425958a..9ce7154 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2002,6 +2002,7 @@
* have quiesced.
*/
if ((s->uptodate == disks - 1) &&
+ (s->failed && disk_idx == s->failed_num) &&
!test_bit(STRIPE_OP_CHECK, &sh->ops.pending)) {
set_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
set_bit(R5_Wantcompute, &dev->flags);
@@ -2016,12 +2017,7 @@
*/
s->uptodate++;
return 0; /* uptodate + compute == disks */
- } else if ((s->uptodate < disks - 1) &&
- test_bit(R5_Insync, &dev->flags)) {
- /* Note: we hold off compute operations while checks are
- * in flight, but we still prefer 'compute' over 'read'
- * hence we only read if (uptodate < * disks-1)
- */
+ } else if (test_bit(R5_Insync, &dev->flags)) {
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantread, &dev->flags);
if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
@@ -2087,7 +2083,9 @@
/* we would like to get this block, possibly
* by computing it, but we might not be able to
*/
- if (s->uptodate == disks-1) {
+ if ((s->uptodate == disks - 1) &&
+ (s->failed && (i == r6s->failed_num[0] ||
+ i == r6s->failed_num[1]))) {
pr_debug("Computing stripe %llu block %d\n",
(unsigned long long)sh->sector, i);
compute_block_1(sh, i, 0);
@@ -2645,6 +2643,7 @@
struct r5dev *dev;
unsigned long pending = 0;
mdk_rdev_t *blocked_rdev = NULL;
+ int prexor;
memset(&s, 0, sizeof(s));
pr_debug("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d "
@@ -2774,9 +2773,11 @@
/* leave prexor set until postxor is done, allows us to distinguish
* a rmw from a rcw during biodrain
*/
+ prexor = 0;
if (test_bit(STRIPE_OP_PREXOR, &sh->ops.complete) &&
test_bit(STRIPE_OP_POSTXOR, &sh->ops.complete)) {
+ prexor = 1;
clear_bit(STRIPE_OP_PREXOR, &sh->ops.complete);
clear_bit(STRIPE_OP_PREXOR, &sh->ops.ack);
clear_bit(STRIPE_OP_PREXOR, &sh->ops.pending);
@@ -2810,6 +2811,8 @@
if (!test_and_set_bit(
STRIPE_OP_IO, &sh->ops.pending))
sh->ops.count++;
+ if (prexor)
+ continue;
if (!test_bit(R5_Insync, &dev->flags) ||
(i == sh->pd_idx && s.failed == 0))
set_bit(STRIPE_INSYNC, &sh->state);
@@ -2890,6 +2893,8 @@
for (i = conf->raid_disks; i--; ) {
set_bit(R5_Wantwrite, &sh->dev[i].flags);
+ set_bit(R5_LOCKED, &dev->flags);
+ s.locked++;
if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
sh->ops.count++;
}
@@ -2903,6 +2908,7 @@
conf->raid_disks);
s.locked += handle_write_operations5(sh, 1, 1);
} else if (s.expanded &&
+ s.locked == 0 &&
!test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) {
clear_bit(STRIPE_EXPAND_READY, &sh->state);
atomic_dec(&conf->reshape_stripes);
@@ -3308,15 +3314,17 @@
/* We want read requests to align with chunks where possible,
* but write requests don't need to.
*/
-static int raid5_mergeable_bvec(struct request_queue *q, struct bio *bio, struct bio_vec *biovec)
+static int raid5_mergeable_bvec(struct request_queue *q,
+ struct bvec_merge_data *bvm,
+ struct bio_vec *biovec)
{
mddev_t *mddev = q->queuedata;
- sector_t sector = bio->bi_sector + get_start_sect(bio->bi_bdev);
+ sector_t sector = bvm->bi_sector + get_start_sect(bvm->bi_bdev);
int max;
unsigned int chunk_sectors = mddev->chunk_size >> 9;
- unsigned int bio_sectors = bio->bi_size >> 9;
+ unsigned int bio_sectors = bvm->bi_size >> 9;
- if (bio_data_dir(bio) == WRITE)
+ if ((bvm->bi_rw & 1) == WRITE)
return biovec->bv_len; /* always allow writes to be mergeable */
max = (chunk_sectors - ((sector & (chunk_sectors - 1)) + bio_sectors)) << 9;
@@ -4297,7 +4305,9 @@
" disk %d\n", bdevname(rdev->bdev,b),
raid_disk);
working_disks++;
- }
+ } else
+ /* Cannot rely on bitmap to complete recovery */
+ conf->fullsync = 1;
}
/*
diff --git a/drivers/media/Makefile b/drivers/media/Makefile
index cc11c4c..09a829d 100644
--- a/drivers/media/Makefile
+++ b/drivers/media/Makefile
@@ -2,12 +2,7 @@
# Makefile for the kernel multimedia device drivers.
#
-obj-y := common/
-
-obj-$(CONFIG_VIDEO_MEDIA) += common/
-
-# Since hybrid devices are here, should be compiled if DVB and/or V4L
-obj-$(CONFIG_VIDEO_MEDIA) += video/
+obj-y += common/ video/
obj-$(CONFIG_VIDEO_DEV) += radio/
obj-$(CONFIG_DVB_CORE) += dvb/
diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c
index a348581..8fa91f8 100644
--- a/drivers/media/common/ir-keymaps.c
+++ b/drivers/media/common/ir-keymaps.c
@@ -2201,3 +2201,41 @@
[0x25] = KEY_POWER, /* power */
};
EXPORT_SYMBOL_GPL(ir_codes_powercolor_real_angel);
+
+IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE] = {
+ [0x20] = KEY_LIST,
+ [0x00] = KEY_POWER,
+ [0x28] = KEY_1,
+ [0x18] = KEY_2,
+ [0x38] = KEY_3,
+ [0x24] = KEY_4,
+ [0x14] = KEY_5,
+ [0x34] = KEY_6,
+ [0x2c] = KEY_7,
+ [0x1c] = KEY_8,
+ [0x3c] = KEY_9,
+ [0x12] = KEY_SUBTITLE,
+ [0x22] = KEY_0,
+ [0x32] = KEY_REWIND,
+ [0x3a] = KEY_SHUFFLE,
+ [0x02] = KEY_PRINT,
+ [0x11] = KEY_CHANNELDOWN,
+ [0x31] = KEY_CHANNELUP,
+ [0x0c] = KEY_ZOOM,
+ [0x1e] = KEY_VOLUMEDOWN,
+ [0x3e] = KEY_VOLUMEUP,
+ [0x0a] = KEY_MUTE,
+ [0x04] = KEY_AUDIO,
+ [0x26] = KEY_RECORD,
+ [0x06] = KEY_PLAY,
+ [0x36] = KEY_STOP,
+ [0x16] = KEY_PAUSE,
+ [0x2e] = KEY_REWIND,
+ [0x0e] = KEY_FASTFORWARD,
+ [0x30] = KEY_TEXT,
+ [0x21] = KEY_GREEN,
+ [0x01] = KEY_BLUE,
+ [0x08] = KEY_EPG,
+ [0x2a] = KEY_MENU,
+};
+EXPORT_SYMBOL_GPL(ir_codes_avermedia_a16d);
diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig
index d620654..8548296 100644
--- a/drivers/media/common/tuners/Kconfig
+++ b/drivers/media/common/tuners/Kconfig
@@ -21,6 +21,7 @@
tristate
default VIDEO_MEDIA && I2C
depends on VIDEO_MEDIA && I2C
+ select FW_LOADER if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMIZE
diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c
index 5d05b53..0dc2bef 100644
--- a/drivers/media/common/tuners/mxl5005s.c
+++ b/drivers/media/common/tuners/mxl5005s.c
@@ -101,7 +101,7 @@
MXL_QAM,
MXL_ANALOG_CABLE,
MXL_ANALOG_OTA
-} tuner_modu_type;
+};
/* MXL5005 Tuner Register Struct */
struct TunerReg {
@@ -194,7 +194,7 @@
RFSYN_DIVM, /* 88 */
DN_BYPASS_AGC_I2C /* 89 */
#endif
-} MXL5005_ControlName;
+};
/*
* The following context is source code provided by MaxLinear.
diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c
index 42b5f5d..6fb5b45 100644
--- a/drivers/media/common/tuners/tda18271-common.c
+++ b/drivers/media/common/tuners/tda18271-common.c
@@ -648,11 +648,19 @@
unsigned char *regs = priv->tda18271_regs;
u8 val;
- tda18271_lookup_map(fe, RF_CAL, freq, &val);
+ int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val);
+ /* The TDA18271HD/C1 rf_cal map lookup is expected to go out of range
+ * for frequencies above 61.1 MHz. In these cases, the internal RF
+ * tracking filters calibration mechanism is used.
+ *
+ * There is no need to warn the user about this.
+ */
+ if (ret < 0)
+ goto fail;
regs[R_EB14] = val;
-
- return 0;
+fail:
+ return ret;
}
/*
diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c
index 89c01fb..93063c6 100644
--- a/drivers/media/common/tuners/tda18271-fe.c
+++ b/drivers/media/common/tuners/tda18271-fe.c
@@ -45,6 +45,21 @@
TDA18271_MAIN_PLL, force);
}
+static inline void tda18271_set_if_notch(struct dvb_frontend *fe)
+{
+ struct tda18271_priv *priv = fe->tuner_priv;
+ unsigned char *regs = priv->tda18271_regs;
+
+ switch (priv->mode) {
+ case TDA18271_ANALOG:
+ regs[R_MPD] &= ~0x80; /* IF notch = 0 */
+ break;
+ case TDA18271_DIGITAL:
+ regs[R_MPD] |= 0x80; /* IF notch = 1 */
+ break;
+ }
+}
+
static int tda18271_channel_configuration(struct dvb_frontend *fe,
struct tda18271_std_map_item *map,
u32 freq, u32 bw)
@@ -60,25 +75,18 @@
regs[R_EP3] &= ~0x1f; /* clear std bits */
regs[R_EP3] |= (map->agc_mode << 3) | map->std;
- /* set rfagc to high speed mode */
- regs[R_EP3] &= ~0x04;
+ if (priv->id == TDA18271HDC2) {
+ /* set rfagc to high speed mode */
+ regs[R_EP3] &= ~0x04;
+ }
/* set cal mode to normal */
regs[R_EP4] &= ~0x03;
- /* update IF output level & IF notch frequency */
+ /* update IF output level */
regs[R_EP4] &= ~0x1c; /* clear if level bits */
regs[R_EP4] |= (map->if_lvl << 2);
- switch (priv->mode) {
- case TDA18271_ANALOG:
- regs[R_MPD] &= ~0x80; /* IF notch = 0 */
- break;
- case TDA18271_DIGITAL:
- regs[R_MPD] |= 0x80; /* IF notch = 1 */
- break;
- }
-
/* update FM_RFn */
regs[R_EP4] &= ~0x80;
regs[R_EP4] |= map->fm_rfn << 7;
@@ -95,6 +103,9 @@
/* disable Power Level Indicator */
regs[R_EP1] |= 0x40;
+ /* make sure thermometer is off */
+ regs[R_TM] &= ~0x10;
+
/* frequency dependent parameters */
tda18271_calc_ir_measure(fe, &freq);
@@ -135,6 +146,7 @@
switch (priv->role) {
case TDA18271_MASTER:
tda18271_calc_main_pll(fe, N);
+ tda18271_set_if_notch(fe);
tda18271_write_regs(fe, R_MPD, 4);
break;
case TDA18271_SLAVE:
@@ -142,6 +154,7 @@
tda18271_write_regs(fe, R_CPD, 4);
regs[R_MPD] = regs[R_CPD] & 0x7f;
+ tda18271_set_if_notch(fe);
tda18271_write_regs(fe, R_MPD, 1);
break;
}
@@ -160,12 +173,14 @@
msleep(20);
- /* set rfagc to normal speed mode */
- if (map->fm_rfn)
- regs[R_EP3] &= ~0x04;
- else
- regs[R_EP3] |= 0x04;
- ret = tda18271_write_regs(fe, R_EP3, 1);
+ if (priv->id == TDA18271HDC2) {
+ /* set rfagc to normal speed mode */
+ if (map->fm_rfn)
+ regs[R_EP3] &= ~0x04;
+ else
+ regs[R_EP3] |= 0x04;
+ ret = tda18271_write_regs(fe, R_EP3, 1);
+ }
fail:
return ret;
}
@@ -507,7 +522,7 @@
/* set cal mode to normal */
regs[R_EP4] &= ~0x03;
- /* update IF output level & IF notch frequency */
+ /* update IF output level */
regs[R_EP4] &= ~0x1c; /* clear if level bits */
ret = tda18271_write_regs(fe, R_EP3, 2);
diff --git a/drivers/media/common/tuners/tda827x.c b/drivers/media/common/tuners/tda827x.c
index d30d2c9..8555d9c 100644
--- a/drivers/media/common/tuners/tda827x.c
+++ b/drivers/media/common/tuners/tda827x.c
@@ -418,13 +418,13 @@
unsigned char buf[] = {0x22, 0x01};
int arg;
int gp_func;
- struct i2c_msg msg = { .addr = priv->cfg->switch_addr, .flags = 0,
- .buf = buf, .len = sizeof(buf) };
+ struct i2c_msg msg = { .flags = 0, .buf = buf, .len = sizeof(buf) };
if (NULL == priv->cfg) {
dprintk("tda827x_config not defined, cannot set LNA gain!\n");
return;
}
+ msg.addr = priv->cfg->switch_addr;
if (priv->cfg->config) {
if (high)
dprintk("setting LNA to high gain\n");
diff --git a/drivers/media/common/tuners/tea5761.c b/drivers/media/common/tuners/tea5761.c
index b93cdef..b23dade 100644
--- a/drivers/media/common/tuners/tea5761.c
+++ b/drivers/media/common/tuners/tea5761.c
@@ -295,7 +295,7 @@
{
struct tea5761_priv *priv = NULL;
- if (tea5761_autodetection(i2c_adap, i2c_addr) == EINVAL)
+ if (tea5761_autodetection(i2c_adap, i2c_addr) != 0)
return NULL;
priv = kzalloc(sizeof(struct tea5761_priv), GFP_KERNEL);
diff --git a/drivers/media/common/tuners/tuner-i2c.h b/drivers/media/common/tuners/tuner-i2c.h
index 3ad6c8e..cb1c714 100644
--- a/drivers/media/common/tuners/tuner-i2c.h
+++ b/drivers/media/common/tuners/tuner-i2c.h
@@ -170,4 +170,12 @@
__ret; \
})
+#define hybrid_tuner_report_instance_count(state) \
+({ \
+ int __ret = 0; \
+ if (state) \
+ __ret = state->i2c_props.count; \
+ __ret; \
+})
+
#endif /* __TUNER_I2C_H__ */
diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c
index be8d903..266c255 100644
--- a/drivers/media/common/tuners/tuner-simple.c
+++ b/drivers/media/common/tuners/tuner-simple.c
@@ -1018,8 +1018,10 @@
fe->ops.i2c_gate_ctrl(fe, 1);
if (1 != i2c_transfer(i2c_adap, &msg, 1))
- tuner_warn("unable to probe %s, proceeding anyway.",
- tuners[type].name);
+ printk(KERN_WARNING "tuner-simple %d-%04x: "
+ "unable to probe %s, proceeding anyway.",
+ i2c_adapter_id(i2c_adap), i2c_addr,
+ tuners[type].name);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c
index 9e9003c..0cbde17 100644
--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ b/drivers/media/common/tuners/tuner-xc2028.c
@@ -46,7 +46,7 @@
MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the "
"default firmware name\n");
-static LIST_HEAD(xc2028_list);
+static LIST_HEAD(hybrid_tuner_instance_list);
static DEFINE_MUTEX(xc2028_list_mutex);
/* struct for storing firmware table */
@@ -68,12 +68,11 @@
};
struct xc2028_data {
- struct list_head xc2028_list;
+ struct list_head hybrid_tuner_instance_list;
struct tuner_i2c_props i2c_props;
int (*tuner_callback) (void *dev,
int command, int arg);
void *video_dev;
- int count;
__u32 frequency;
struct firmware_description *firm;
@@ -1072,20 +1071,19 @@
mutex_lock(&xc2028_list_mutex);
- priv->count--;
-
- if (!priv->count) {
- list_del(&priv->xc2028_list);
-
+ /* only perform final cleanup if this is the last instance */
+ if (hybrid_tuner_report_instance_count(priv) == 1) {
kfree(priv->ctrl.fname);
-
free_firmware(priv);
- kfree(priv);
- fe->tuner_priv = NULL;
}
+ if (priv)
+ hybrid_tuner_release_state(priv);
+
mutex_unlock(&xc2028_list_mutex);
+ fe->tuner_priv = NULL;
+
return 0;
}
@@ -1150,7 +1148,7 @@
struct xc2028_config *cfg)
{
struct xc2028_data *priv;
- void *video_dev;
+ int instance;
if (debug)
printk(KERN_DEBUG "xc2028: Xcv2028/3028 init called!\n");
@@ -1163,49 +1161,41 @@
return NULL;
}
- video_dev = cfg->i2c_adap->algo_data;
-
- if (debug)
- printk(KERN_DEBUG "xc2028: video_dev =%p\n", video_dev);
-
mutex_lock(&xc2028_list_mutex);
- list_for_each_entry(priv, &xc2028_list, xc2028_list) {
- if (&priv->i2c_props.adap->dev == &cfg->i2c_adap->dev) {
- video_dev = NULL;
- if (debug)
- printk(KERN_DEBUG "xc2028: reusing device\n");
-
- break;
- }
- }
-
- if (video_dev) {
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (priv == NULL) {
- mutex_unlock(&xc2028_list_mutex);
- return NULL;
- }
-
- priv->i2c_props.addr = cfg->i2c_addr;
- priv->i2c_props.adap = cfg->i2c_adap;
- priv->i2c_props.name = "xc2028";
-
- priv->video_dev = video_dev;
+ instance = hybrid_tuner_request_state(struct xc2028_data, priv,
+ hybrid_tuner_instance_list,
+ cfg->i2c_adap, cfg->i2c_addr,
+ "xc2028");
+ switch (instance) {
+ case 0:
+ /* memory allocation failure */
+ goto fail;
+ break;
+ case 1:
+ /* new tuner instance */
priv->tuner_callback = cfg->callback;
priv->ctrl.max_len = 13;
mutex_init(&priv->lock);
- list_add_tail(&priv->xc2028_list, &xc2028_list);
+ /* analog side (tuner-core) uses i2c_adap->algo_data.
+ * digital side is not guaranteed to have algo_data defined.
+ *
+ * digital side will always have fe->dvb defined.
+ * analog side (tuner-core) doesn't (yet) define fe->dvb.
+ */
+ priv->video_dev = ((fe->dvb) && (fe->dvb->priv)) ?
+ fe->dvb->priv : cfg->i2c_adap->algo_data;
+
+ fe->tuner_priv = priv;
+ break;
+ case 2:
+ /* existing tuner instance */
+ fe->tuner_priv = priv;
+ break;
}
- fe->tuner_priv = priv;
- priv->count++;
-
- if (debug)
- printk(KERN_DEBUG "xc2028: usage count is %i\n", priv->count);
-
memcpy(&fe->ops.tuner_ops, &xc2028_dvb_tuner_ops,
sizeof(xc2028_dvb_tuner_ops));
@@ -1217,6 +1207,11 @@
mutex_unlock(&xc2028_list_mutex);
return fe;
+fail:
+ mutex_unlock(&xc2028_list_mutex);
+
+ xc2028_dvb_release(fe);
+ return NULL;
}
EXPORT_SYMBOL(xc2028_attach);
diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c
index ceae6db..7cf4f5b 100644
--- a/drivers/media/common/tuners/xc5000.c
+++ b/drivers/media/common/tuners/xc5000.c
@@ -177,6 +177,7 @@
{"FM Radio-INPUT1", 0x0208, 0x9002}
};
+static int xc5000_is_firmware_loaded(struct dvb_frontend *fe);
static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len);
static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len);
static void xc5000_TunerReset(struct dvb_frontend *fe);
@@ -352,7 +353,7 @@
static int xc_shutdown(struct xc5000_priv *priv)
{
- return 0;
+ return XC_RESULT_SUCCESS;
/* Fixme: cannot bring tuner back alive once shutdown
* without reloading the driver modules.
* return xc_write_reg(priv, XREG_POWER_DOWN, 0);
@@ -685,6 +686,25 @@
return 0;
}
+static int xc5000_is_firmware_loaded(struct dvb_frontend *fe)
+{
+ struct xc5000_priv *priv = fe->tuner_priv;
+ int ret;
+ u16 id;
+
+ ret = xc5000_readreg(priv, XREG_PRODUCT_ID, &id);
+ if (ret == XC_RESULT_SUCCESS) {
+ if (id == XC_PRODUCT_ID_FW_NOT_LOADED)
+ ret = XC_RESULT_RESET_FAILURE;
+ else
+ ret = XC_RESULT_SUCCESS;
+ }
+
+ dprintk(1, "%s() returns %s id = 0x%x\n", __func__,
+ ret == XC_RESULT_SUCCESS ? "True" : "False", id);
+ return ret;
+}
+
static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe);
static int xc5000_set_analog_params(struct dvb_frontend *fe,
@@ -693,7 +713,7 @@
struct xc5000_priv *priv = fe->tuner_priv;
int ret;
- if(priv->fwloaded == 0)
+ if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS)
xc_load_fw_and_init_tuner(fe);
dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",
@@ -808,11 +828,10 @@
struct xc5000_priv *priv = fe->tuner_priv;
int ret = 0;
- if (priv->fwloaded == 0) {
+ if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) {
ret = xc5000_fwupload(fe);
if (ret != XC_RESULT_SUCCESS)
return ret;
- priv->fwloaded = 1;
}
/* Start the tuner self-calibration process */
@@ -852,7 +871,6 @@
return -EREMOTEIO;
}
else {
- /* priv->fwloaded = 0; */
return XC_RESULT_SUCCESS;
}
}
@@ -933,7 +951,6 @@
cfg->i2c_address);
printk(KERN_INFO
"xc5000: Firmware has been loaded previously\n");
- priv->fwloaded = 1;
break;
case XC_PRODUCT_ID_FW_NOT_LOADED:
printk(KERN_INFO
@@ -941,7 +958,6 @@
cfg->i2c_address);
printk(KERN_INFO
"xc5000: Firmware has not been loaded previously\n");
- priv->fwloaded = 0;
break;
default:
printk(KERN_ERR
diff --git a/drivers/media/common/tuners/xc5000_priv.h b/drivers/media/common/tuners/xc5000_priv.h
index ecebfe4..a72a988 100644
--- a/drivers/media/common/tuners/xc5000_priv.h
+++ b/drivers/media/common/tuners/xc5000_priv.h
@@ -30,7 +30,6 @@
u32 bandwidth;
u8 video_standard;
u8 rf_mode;
- u8 fwloaded;
void *devptr;
};
diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c
index 449fb5c..ae0d76a 100644
--- a/drivers/media/dvb/b2c2/flexcop-usb.c
+++ b/drivers/media/dvb/b2c2/flexcop-usb.c
@@ -379,7 +379,7 @@
static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
{
- u16 frame_size = fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize;
+ u16 frame_size = le16_to_cpu(fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize);
int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret;
int buffer_offset = 0;
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index f5010e8..a824f37 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -82,22 +82,22 @@
struct dvbt_set_parameters_msg {
uint8_t cmd;
- uint32_t freq;
+ __le32 freq;
uint8_t bandwidth;
- uint16_t tps;
+ __le16 tps;
uint8_t flags;
} __attribute__((packed));
struct dvbt_get_status_msg {
- uint32_t freq;
+ __le32 freq;
uint8_t bandwidth;
- uint16_t tps;
+ __le16 tps;
uint8_t flags;
- uint16_t gain;
+ __le16 gain;
uint8_t snr;
- uint32_t viterbi_error_rate;
- uint32_t rs_error_rate;
- uint32_t uncorrected_block_count;
+ __le32 viterbi_error_rate;
+ __le32 rs_error_rate;
+ __le32 uncorrected_block_count;
uint8_t lock_bits;
uint8_t prev_lock_bits;
} __attribute__((packed));
@@ -136,6 +136,7 @@
wait_queue_head_t poll_wq;
int pending_fe_events;
int disconnect_pending;
+ unsigned int uncorrected_block_count;
atomic_t inuse;
void *streambuf;
@@ -147,7 +148,7 @@
char phys[64];
struct delayed_work rc_query_work;
int rc_input_event;
- u32 rc_last_code;
+ __le32 rc_last_code;
unsigned long last_event_jiffies;
#endif
};
@@ -160,7 +161,7 @@
struct cinergyt2_rc_event {
char type;
- uint32_t value;
+ __le32 value;
} __attribute__((packed));
static const uint32_t rc_keys[] = {
@@ -619,8 +620,11 @@
{
uint32_t unc_count;
- unc_count = stat->uncorrected_block_count;
- stat->uncorrected_block_count = 0;
+ if (mutex_lock_interruptible(&cinergyt2->sem))
+ return -ERESTARTSYS;
+ unc_count = cinergyt2->uncorrected_block_count;
+ cinergyt2->uncorrected_block_count = 0;
+ mutex_unlock(&cinergyt2->sem);
/* UNC are already converted to host byte order... */
return put_user(unc_count,(__u32 __user *) arg);
@@ -769,7 +773,7 @@
input_sync(cinergyt2->rc_input_dev);
cinergyt2->rc_input_event = KEY_MAX;
}
- cinergyt2->rc_last_code = ~0;
+ cinergyt2->rc_last_code = cpu_to_le32(~0);
}
goto out;
}
@@ -780,7 +784,7 @@
n, le32_to_cpu(rc_events[n].value), rc_events[n].type);
if (rc_events[n].type == CINERGYT2_RC_EVENT_TYPE_NEC &&
- rc_events[n].value == ~0) {
+ rc_events[n].value == cpu_to_le32(~0)) {
/* keyrepeat bit -> just repeat last rc_input_event */
} else {
cinergyt2->rc_input_event = KEY_MAX;
@@ -795,7 +799,7 @@
if (cinergyt2->rc_input_event != KEY_MAX) {
if (rc_events[n].value == cinergyt2->rc_last_code &&
- cinergyt2->rc_last_code != ~0) {
+ cinergyt2->rc_last_code != cpu_to_le32(~0)) {
/* emit a key-up so the double event is recognized */
dprintk(1, "rc_input_event=%d UP\n", cinergyt2->rc_input_event);
input_report_key(cinergyt2->rc_input_dev,
@@ -829,7 +833,7 @@
usb_make_path(cinergyt2->udev, cinergyt2->phys, sizeof(cinergyt2->phys));
strlcat(cinergyt2->phys, "/input0", sizeof(cinergyt2->phys));
cinergyt2->rc_input_event = KEY_MAX;
- cinergyt2->rc_last_code = ~0;
+ cinergyt2->rc_last_code = cpu_to_le32(~0);
INIT_DELAYED_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc);
input_dev->name = DRIVER_NAME " remote control";
@@ -840,8 +844,8 @@
input_dev->keycodesize = 0;
input_dev->keycodemax = 0;
input_dev->id.bustype = BUS_USB;
- input_dev->id.vendor = cinergyt2->udev->descriptor.idVendor;
- input_dev->id.product = cinergyt2->udev->descriptor.idProduct;
+ input_dev->id.vendor = le16_to_cpu(cinergyt2->udev->descriptor.idVendor);
+ input_dev->id.product = le16_to_cpu(cinergyt2->udev->descriptor.idProduct);
input_dev->id.version = 1;
input_dev->dev.parent = &cinergyt2->udev->dev;
@@ -889,18 +893,16 @@
char cmd [] = { CINERGYT2_EP1_GET_TUNER_STATUS };
struct dvbt_get_status_msg *s = &cinergyt2->status;
uint8_t lock_bits;
- uint32_t unc;
if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem))
return;
- unc = s->uncorrected_block_count;
lock_bits = s->lock_bits;
cinergyt2_command(cinergyt2, cmd, sizeof(cmd), (char *) s, sizeof(*s));
- unc += le32_to_cpu(s->uncorrected_block_count);
- s->uncorrected_block_count = unc;
+ cinergyt2->uncorrected_block_count +=
+ le32_to_cpu(s->uncorrected_block_count);
if (lock_bits != s->lock_bits) {
wake_up_interruptible(&cinergyt2->poll_wq);
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index 56d871c..c2334ae 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -168,7 +168,7 @@
* stolen from eth.c out of the linux kernel, hacked for dvb-device
* by Michael Holzt <kju@debian.org>
*/
-static unsigned short dvb_net_eth_type_trans(struct sk_buff *skb,
+static __be16 dvb_net_eth_type_trans(struct sk_buff *skb,
struct net_device *dev)
{
struct ethhdr *eth;
@@ -277,10 +277,10 @@
if(ext_len >= 0) {
p->ule_next_hdr += ext_len;
if (!p->ule_bridged) {
- p->ule_sndu_type = ntohs(*(unsigned short *)p->ule_next_hdr);
+ p->ule_sndu_type = ntohs(*(__be16 *)p->ule_next_hdr);
p->ule_next_hdr += 2;
} else {
- p->ule_sndu_type = ntohs(*(unsigned short *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN)));
+ p->ule_sndu_type = ntohs(*(__be16 *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN)));
/* This assures the extension handling loop will terminate. */
}
}
@@ -294,7 +294,7 @@
if (ule_optional_ext_handlers[htype])
(void)ule_optional_ext_handlers[htype]( p );
p->ule_next_hdr += ext_len;
- p->ule_sndu_type = ntohs( *(unsigned short *)(p->ule_next_hdr-2) );
+ p->ule_sndu_type = ntohs( *(__be16 *)(p->ule_next_hdr-2) );
/*
* note: the length of the next header type is included in the
* length of THIS optional extension header
@@ -594,8 +594,8 @@
/* Check for complete payload. */
if (priv->ule_sndu_remain <= 0) {
/* Check CRC32, we've got it in our skb already. */
- unsigned short ulen = htons(priv->ule_sndu_len);
- unsigned short utype = htons(priv->ule_sndu_type);
+ __be16 ulen = htons(priv->ule_sndu_len);
+ __be16 utype = htons(priv->ule_sndu_type);
const u8 *tail;
struct kvec iov[3] = {
{ &ulen, sizeof ulen },
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index cf4584e..f00a0eb 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -1,6 +1,6 @@
config DVB_USB
tristate "Support for various USB DVB devices"
- depends on DVB_CORE && USB && I2C
+ depends on DVB_CORE && USB && I2C && INPUT
depends on HOTPLUG # due to FW_LOADER
select FW_LOADER
help
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 3462238..c4d40fe 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -111,8 +111,8 @@
struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1);
s8 a;
int if1=1220;
- if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE &&
- adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_500_2) {
+ if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
+ adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
}
return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id],
@@ -402,8 +402,8 @@
{
struct usb_device_descriptor *desc = &adap->dev->udev->descriptor;
- if (desc->idVendor == USB_VID_PINNACLE &&
- desc->idProduct == USB_PID_PINNACLE_EXPRESSCARD_320CX)
+ if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
+ desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX))
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
else
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
@@ -845,8 +845,8 @@
struct i2c_adapter *tun_i2c;
s8 a;
int if1=1220;
- if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE &&
- adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_STICK) {
+ if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
+ adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) {
if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
}
if (st->is_dib7000pc)
@@ -990,11 +990,12 @@
/* STK7070P */
static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
{
- if (adap->dev->udev->descriptor.idVendor == USB_VID_PINNACLE &&
- adap->dev->udev->descriptor.idProduct == USB_PID_PINNACLE_PCTV72E)
- dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+ struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
+ if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
+ p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
else
- dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
index e1112e3..733a7ff 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
@@ -127,7 +127,7 @@
if ((*pos + hx->len + 4) >= fw->size)
return -EINVAL;
- hx->addr = le16_to_cpu( *((u16 *) &b[1]) );
+ hx->addr = b[1] | (b[2] << 8);
hx->type = b[3];
if (hx->type == 0x04) {
diff --git a/drivers/media/dvb/dvb-usb/gl861.c b/drivers/media/dvb/dvb-usb/gl861.c
index 0a8ac64..037f7ff 100644
--- a/drivers/media/dvb/dvb-usb/gl861.c
+++ b/drivers/media/dvb/dvb-usb/gl861.c
@@ -47,6 +47,8 @@
return -EINVAL;
}
+ msleep(1); /* avoid I2C errors */
+
return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), req, type,
value, index, rbuf, rlen, 2000);
}
@@ -92,16 +94,6 @@
};
/* Callbacks for DVB USB */
-static int gl861_identify_state(struct usb_device *udev,
- struct dvb_usb_device_properties *props,
- struct dvb_usb_device_description **desc,
- int *cold)
-{
- *cold = 0;
-
- return 0;
-}
-
static struct zl10353_config gl861_zl10353_config = {
.demod_address = 0x0f,
.no_tuner = 1,
@@ -172,7 +164,6 @@
.size_of_priv = 0,
- .identify_state = gl861_identify_state,
.num_adapters = 1,
.adapter = {{
@@ -194,13 +185,15 @@
.num_device_descs = 2,
.devices = {
- { "MSI Mega Sky 55801 DVB-T USB2.0",
- { &gl861_table[0], NULL },
- { NULL },
+ {
+ .name = "MSI Mega Sky 55801 DVB-T USB2.0",
+ .cold_ids = { NULL },
+ .warm_ids = { &gl861_table[0], NULL },
},
- { "A-LINK DTU DVB-T USB2.0",
- { &gl861_table[1], NULL },
- { NULL },
+ {
+ .name = "A-LINK DTU DVB-T USB2.0",
+ .cold_ids = { NULL },
+ .warm_ids = { &gl861_table[1], NULL },
},
}
};
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c
index 9a942af..2653120 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk.c
+++ b/drivers/media/dvb/dvb-usb/gp8psk.c
@@ -146,24 +146,24 @@
if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */
if(gp8psk_load_bcm4500fw(d))
- return EINVAL;
+ return -EINVAL;
if (! (status & bmIntersilOn)) /* LNB Power */
if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0,
&buf, 1))
- return EINVAL;
+ return -EINVAL;
/* Set DVB mode to 1 */
if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))
- return EINVAL;
+ return -EINVAL;
/* Abort possible TS (if previous tune crashed) */
if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0))
- return EINVAL;
+ return -EINVAL;
} else {
/* Turn off LNB power */
if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1))
- return EINVAL;
+ return -EINVAL;
/* Turn off 8psk power */
if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
return -EINVAL;
diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c
index a12e6f7..54626a0 100644
--- a/drivers/media/dvb/dvb-usb/m920x.c
+++ b/drivers/media/dvb/dvb-usb/m920x.c
@@ -16,6 +16,7 @@
#include "qt1010.h"
#include "tda1004x.h"
#include "tda827x.h"
+#include <asm/unaligned.h>
/* debug */
static int dvb_usb_m920x_debug;
@@ -347,13 +348,13 @@
for (pass = 0; pass < 2; pass++) {
for (i = 0; i + (sizeof(u16) * 3) < fw->size;) {
- value = le16_to_cpu(*(u16 *)(fw->data + i));
+ value = get_unaligned_le16(fw->data + i);
i += sizeof(u16);
- index = le16_to_cpu(*(u16 *)(fw->data + i));
+ index = get_unaligned_le16(fw->data + i);
i += sizeof(u16);
- size = le16_to_cpu(*(u16 *)(fw->data + i));
+ size = get_unaligned_le16(fw->data + i);
i += sizeof(u16);
if (pass == 1) {
diff --git a/drivers/media/dvb/dvb-usb/umt-010.c b/drivers/media/dvb/dvb-usb/umt-010.c
index 9e7653b..118aab1 100644
--- a/drivers/media/dvb/dvb-usb/umt-010.c
+++ b/drivers/media/dvb/dvb-usb/umt-010.c
@@ -107,7 +107,7 @@
/* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
- .count = 20,
+ .count = MAX_NO_URBS_FOR_DATA_STREAM,
.endpoint = 0x06,
.u = {
.bulk = {
diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c
index 084a280..03900d2 100644
--- a/drivers/media/dvb/frontends/au8522.c
+++ b/drivers/media/dvb/frontends/au8522.c
@@ -463,10 +463,13 @@
struct dvb_frontend_parameters *p)
{
struct au8522_state *state = fe->demodulator_priv;
+ int ret = -EINVAL;
dprintk("%s(frequency=%d)\n", __func__, p->frequency);
- state->current_frequency = p->frequency;
+ if ((state->current_frequency == p->frequency) &&
+ (state->current_modulation == p->u.vsb.modulation))
+ return 0;
au8522_enable_modulation(fe, p->u.vsb.modulation);
@@ -476,11 +479,16 @@
if (fe->ops.tuner_ops.set_params) {
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
- fe->ops.tuner_ops.set_params(fe, p);
+ ret = fe->ops.tuner_ops.set_params(fe, p);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
}
+ if (ret < 0)
+ return ret;
+
+ state->current_frequency = p->frequency;
+
return 0;
}
@@ -498,6 +506,16 @@
return 0;
}
+static int au8522_sleep(struct dvb_frontend *fe)
+{
+ struct au8522_state *state = fe->demodulator_priv;
+ dprintk("%s()\n", __func__);
+
+ state->current_frequency = 0;
+
+ return 0;
+}
+
static int au8522_read_status(struct dvb_frontend *fe, fe_status_t *status)
{
struct au8522_state *state = fe->demodulator_priv;
@@ -509,10 +527,8 @@
if (state->current_modulation == VSB_8) {
dprintk("%s() Checking VSB_8\n", __func__);
reg = au8522_readreg(state, 0x4088);
- if (reg & 0x01)
- *status |= FE_HAS_VITERBI;
- if (reg & 0x02)
- *status |= FE_HAS_LOCK | FE_HAS_SYNC;
+ if ((reg & 0x03) == 0x03)
+ *status |= FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI;
} else {
dprintk("%s() Checking QAM\n", __func__);
reg = au8522_readreg(state, 0x4541);
@@ -672,6 +688,7 @@
},
.init = au8522_init,
+ .sleep = au8522_sleep,
.i2c_gate_ctrl = au8522_i2c_gate_ctrl,
.set_frontend = au8522_set_frontend,
.get_frontend = au8522_get_frontend,
diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h
index 786e37d..3eedfdf 100644
--- a/drivers/media/dvb/frontends/dib0070.h
+++ b/drivers/media/dvb/frontends/dib0070.h
@@ -37,7 +37,20 @@
u8 flip_chip;
};
-extern struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg);
+#if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE))
+extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct dib0070_config *cfg);
+#else
+static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct dib0070_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif
+
extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, uint8_t open);
extern u16 dib0070_wbd_offset(struct dvb_frontend *);
diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h
index 081bd81..07c4d12 100644
--- a/drivers/media/dvb/frontends/dib7000p.h
+++ b/drivers/media/dvb/frontends/dib7000p.h
@@ -37,7 +37,20 @@
#define DEFAULT_DIB7000P_I2C_ADDRESS 18
-extern struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg);
+#if defined(CONFIG_DVB_DIB7000P) || (defined(CONFIG_DVB_DIB7000P_MODULE) && defined(MODULE))
+extern struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap,
+ u8 i2c_addr,
+ struct dib7000p_config *cfg);
+#else
+static inline struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap,
+ u8 i2c_addr,
+ struct dib7000p_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif
+
extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]);
extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c
index c7b5785..5ed3254 100644
--- a/drivers/media/dvb/frontends/or51132.c
+++ b/drivers/media/dvb/frontends/or51132.c
@@ -126,7 +126,7 @@
reg, err);
return -EREMOTEIO;
}
- return le16_to_cpup((u16*)buf);
+ return buf[0] | (buf[1] << 8);
}
static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
@@ -140,9 +140,9 @@
dprintk("Firmware is %Zd bytes\n",fw->size);
/* Get size of firmware A and B */
- firmwareAsize = le32_to_cpu(*((u32*)fw->data));
+ firmwareAsize = le32_to_cpu(*((__le32*)fw->data));
dprintk("FirmwareA is %i bytes\n",firmwareAsize);
- firmwareBsize = le32_to_cpu(*((u32*)(fw->data+4)));
+ firmwareBsize = le32_to_cpu(*((__le32*)(fw->data+4)));
dprintk("FirmwareB is %i bytes\n",firmwareBsize);
/* Upload firmware */
diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c
index 1755618..35435be 100644
--- a/drivers/media/dvb/frontends/stv0299.c
+++ b/drivers/media/dvb/frontends/stv0299.c
@@ -63,6 +63,7 @@
u32 symbol_rate;
fe_code_rate_t fec_inner;
int errmode;
+ u32 ucblocks;
};
#define STATUS_BER 0
@@ -501,8 +502,10 @@
{
struct stv0299_state* state = fe->demodulator_priv;
- if (state->errmode != STATUS_BER) return 0;
- *ber = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
+ if (state->errmode != STATUS_BER)
+ return -ENOSYS;
+
+ *ber = stv0299_readreg(state, 0x1e) | (stv0299_readreg(state, 0x1d) << 8);
return 0;
}
@@ -540,8 +543,12 @@
{
struct stv0299_state* state = fe->demodulator_priv;
- if (state->errmode != STATUS_UCBLOCKS) *ucblocks = 0;
- else *ucblocks = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
+ if (state->errmode != STATUS_UCBLOCKS)
+ return -ENOSYS;
+
+ state->ucblocks += stv0299_readreg(state, 0x1e);
+ state->ucblocks += (stv0299_readreg(state, 0x1d) << 8);
+ *ucblocks = state->ucblocks;
return 0;
}
diff --git a/drivers/media/dvb/frontends/tda10023.c b/drivers/media/dvb/frontends/tda10023.c
index 0727b80..c6ff5b8 100644
--- a/drivers/media/dvb/frontends/tda10023.c
+++ b/drivers/media/dvb/frontends/tda10023.c
@@ -116,9 +116,12 @@
int ret;
ret = i2c_transfer (state->i2c, msg, 2);
- if (ret != 2)
- printk("DVB: TDA10023: %s: readreg error (ret == %i)\n",
- __func__, ret);
+ if (ret != 2) {
+ int num = state->frontend.dvb ? state->frontend.dvb->num : -1;
+ printk(KERN_ERR "DVB: TDA10023(%d): %s: readreg error "
+ "(reg == 0x%02x, ret == %i)\n",
+ num, __func__, reg, ret);
+ }
return b1[0];
}
@@ -129,11 +132,12 @@
int ret;
ret = i2c_transfer (state->i2c, &msg, 1);
- if (ret != 1)
- printk("DVB: TDA10023(%d): %s, writereg error "
+ if (ret != 1) {
+ int num = state->frontend.dvb ? state->frontend.dvb->num : -1;
+ printk(KERN_ERR "DVB: TDA10023(%d): %s, writereg error "
"(reg == 0x%02x, val == 0x%02x, ret == %i)\n",
- state->frontend.dvb->num, __func__, reg, data, ret);
-
+ num, __func__, reg, data, ret);
+ }
return (ret != 1) ? -EREMOTEIO : 0;
}
@@ -464,7 +468,7 @@
int i;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda10023_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda10023_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
index 4997384..a0d6386 100644
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ b/drivers/media/dvb/frontends/tda1004x.c
@@ -1248,11 +1248,14 @@
struct i2c_adapter* i2c)
{
struct tda1004x_state *state;
+ int id;
/* allocate memory for the internal state */
state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
- if (!state)
+ if (!state) {
+ printk(KERN_ERR "Can't alocate memory for tda10045 state\n");
return NULL;
+ }
/* setup the state */
state->config = config;
@@ -1260,7 +1263,15 @@
state->demod_type = TDA1004X_DEMOD_TDA10045;
/* check if the demod is there */
- if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x25) {
+ id = tda1004x_read_byte(state, TDA1004X_CHIPID);
+ if (id < 0) {
+ printk(KERN_ERR "tda10045: chip is not answering. Giving up.\n");
+ kfree(state);
+ return NULL;
+ }
+
+ if (id != 0x25) {
+ printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);
kfree(state);
return NULL;
}
@@ -1307,11 +1318,14 @@
struct i2c_adapter* i2c)
{
struct tda1004x_state *state;
+ int id;
/* allocate memory for the internal state */
state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
- if (!state)
+ if (!state) {
+ printk(KERN_ERR "Can't alocate memory for tda10046 state\n");
return NULL;
+ }
/* setup the state */
state->config = config;
@@ -1319,7 +1333,14 @@
state->demod_type = TDA1004X_DEMOD_TDA10046;
/* check if the demod is there */
- if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) {
+ id = tda1004x_read_byte(state, TDA1004X_CHIPID);
+ if (id < 0) {
+ printk(KERN_ERR "tda10046: chip is not answering. Giving up.\n");
+ kfree(state);
+ return NULL;
+ }
+ if (id != 0x46) {
+ printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);
kfree(state);
return NULL;
}
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index d4339b1..07643e0 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -101,6 +101,7 @@
config DVB_BUDGET_CI
tristate "Budget cards with onboard CI connector"
depends on DVB_BUDGET_CORE && I2C
+ depends on INPUT # due to IR
select DVB_STV0297 if !DVB_FE_CUSTOMISE
select DVB_STV0299 if !DVB_FE_CUSTOMISE
select DVB_TDA1004X if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 747e7f1..f05d43d 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -51,6 +51,7 @@
#include <linux/crc32.h>
#include <linux/i2c.h>
#include <linux/kthread.h>
+#include <asm/unaligned.h>
#include <asm/system.h>
@@ -1461,9 +1462,9 @@
ptr += 4;
/* check dpram file */
- crc = ntohl(*(u32*) ptr);
+ crc = get_unaligned_be32(ptr);
ptr += 4;
- len = ntohl(*(u32*) ptr);
+ len = get_unaligned_be32(ptr);
ptr += 4;
if (len >= 512) {
printk("dvb-ttpci: dpram file is way too big.\n");
@@ -1478,9 +1479,9 @@
ptr += len;
/* check root file */
- crc = ntohl(*(u32*) ptr);
+ crc = get_unaligned_be32(ptr);
ptr += 4;
- len = ntohl(*(u32*) ptr);
+ len = get_unaligned_be32(ptr);
ptr += 4;
if (len <= 200000 || len >= 300000 ||
diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c
index 3e6b650..ec55a968 100644
--- a/drivers/media/dvb/ttpci/av7110_av.c
+++ b/drivers/media/dvb/ttpci/av7110_av.c
@@ -965,8 +965,9 @@
static int play_iframe(struct av7110 *av7110, char __user *buf, unsigned int len, int nonblock)
{
- int i, n;
+ unsigned i, n;
int progressive = 0;
+ int match = 0;
dprintk(2, "av7110:%p, \n", av7110);
@@ -975,12 +976,31 @@
return -EBUSY;
}
- for (i = 0; i < len - 5; i++) {
- /* get progressive flag from picture extension */
- if (buf[i] == 0x00 && buf[i+1] == 0x00 &&
- buf[i+2] == 0x01 && (unsigned char)buf[i+3] == 0xb5 &&
- (buf[i+4] & 0xf0) == 0x10)
- progressive = buf[i+5] & 0x08;
+ /* search in buf for instances of 00 00 01 b5 1? */
+ for (i = 0; i < len; i++) {
+ unsigned char c;
+ if (get_user(c, buf + i))
+ return -EFAULT;
+ if (match == 5) {
+ progressive = c & 0x08;
+ match = 0;
+ }
+ if (c == 0x00) {
+ match = (match == 1 || match == 2) ? 2 : 1;
+ continue;
+ }
+ switch (match++) {
+ case 2: if (c == 0x01)
+ continue;
+ break;
+ case 3: if (c == 0xb5)
+ continue;
+ break;
+ case 4: if ((c & 0xf0) == 0x10)
+ continue;
+ break;
+ }
+ match = 0;
}
/* setting n always > 1, fixes problems when playing stillframes
diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
index 9d81074..3a3f527 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ b/drivers/media/dvb/ttpci/av7110_hw.c
@@ -427,6 +427,7 @@
if (err) {
printk(KERN_ERR "%s: timeout waiting on busy %s QUEUE\n",
__func__, type);
+ av7110->arm_errors++;
return -ETIMEDOUT;
}
msleep(1);
@@ -853,10 +854,8 @@
static inline int WaitUntilBmpLoaded(struct av7110 *av7110)
{
- int ret = wait_event_interruptible_timeout(av7110->bmpq,
+ int ret = wait_event_timeout(av7110->bmpq,
av7110->bmp_state != BMP_LOADING, 10*HZ);
- if (ret == -ERESTARTSYS)
- return ret;
if (ret == 0) {
printk("dvb-ttpci: warning: timeout waiting in LoadBitmap: %d, %d\n",
ret, av7110->bmp_state);
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 732ce4d..5d2d81a 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -552,7 +552,7 @@
u16 csum = 0, cc;
int i;
for (i = 0; i < len; i += 2)
- csum ^= le16_to_cpup((u16 *) (muxpack + i));
+ csum ^= le16_to_cpup((__le16 *) (muxpack + i));
if (csum) {
printk("%s: muxpack with incorrect checksum, ignoring\n",
__func__);
diff --git a/drivers/media/dvb/ttusb-dec/Kconfig b/drivers/media/dvb/ttusb-dec/Kconfig
index 0712899..a23cc0a 100644
--- a/drivers/media/dvb/ttusb-dec/Kconfig
+++ b/drivers/media/dvb/ttusb-dec/Kconfig
@@ -1,6 +1,6 @@
config DVB_TTUSB_DEC
tristate "Technotrend/Hauppauge USB DEC devices"
- depends on DVB_CORE && USB
+ depends on DVB_CORE && USB && INPUT
depends on HOTPLUG # due to FW_LOADER
select FW_LOADER
select CRC32
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index 42eee04..fefdc05 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -343,7 +343,7 @@
u8 c[COMMAND_PACKET_SIZE];
int c_length;
int result;
- unsigned int tmp;
+ __be32 tmp;
dprintk("%s\n", __func__);
@@ -398,9 +398,9 @@
0x00, 0x00, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff };
- u16 pcr = htons(dec->pid[DMX_PES_PCR]);
- u16 audio = htons(dec->pid[DMX_PES_AUDIO]);
- u16 video = htons(dec->pid[DMX_PES_VIDEO]);
+ __be16 pcr = htons(dec->pid[DMX_PES_PCR]);
+ __be16 audio = htons(dec->pid[DMX_PES_AUDIO]);
+ __be16 video = htons(dec->pid[DMX_PES_VIDEO]);
dprintk("%s\n", __func__);
@@ -435,7 +435,7 @@
case 0x01: { /* VideoStream */
int prebytes = pva[5] & 0x03;
int postbytes = (pva[5] & 0x0c) >> 2;
- u16 v_pes_payload_length;
+ __be16 v_pes_payload_length;
if (output_pva) {
dec->video_filter->feed->cb.ts(pva, length, NULL, 0,
@@ -1006,7 +1006,7 @@
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00 };
- u16 pid;
+ __be16 pid;
u8 c[COMMAND_PACKET_SIZE];
int c_length;
int result;
@@ -1278,9 +1278,10 @@
u8 *firmware = NULL;
size_t firmware_size = 0;
u16 firmware_csum = 0;
- u16 firmware_csum_ns;
- u32 firmware_size_nl;
- u32 crc32_csum, crc32_check, tmp;
+ __be16 firmware_csum_ns;
+ __be32 firmware_size_nl;
+ u32 crc32_csum, crc32_check;
+ __be32 tmp;
const struct firmware *fw_entry = NULL;
dprintk("%s\n", __func__);
@@ -1306,7 +1307,7 @@
valid. */
crc32_csum = crc32(~0L, firmware, 56) ^ ~0L;
memcpy(&tmp, &firmware[56], 4);
- crc32_check = htonl(tmp);
+ crc32_check = ntohl(tmp);
if (crc32_csum != crc32_check) {
printk("%s: crc32 check of DSP code failed (calculated "
"0x%08x != 0x%08x in file), file invalid.\n",
@@ -1627,7 +1628,7 @@
usb_set_intfdata(intf, (void *)dec);
- switch (le16_to_cpu(id->idProduct)) {
+ switch (id->idProduct) {
case 0x1006:
ttusb_dec_set_model(dec, TTUSB_DEC3000S);
break;
@@ -1652,7 +1653,7 @@
ttusb_dec_init_dvb(dec);
dec->adapter.priv = dec;
- switch (le16_to_cpu(id->idProduct)) {
+ switch (id->idProduct) {
case 0x1006:
dec->fe = ttusbdecfe_dvbs_attach(&fe_config);
break;
diff --git a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c
index eb5eaec..443af24 100644
--- a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c
+++ b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c
@@ -86,7 +86,7 @@
0x00, 0x00, 0x00, 0xff,
0x00, 0x00, 0x00, 0xff };
- u32 freq = htonl(p->frequency / 1000);
+ __be32 freq = htonl(p->frequency / 1000);
memcpy(&b[4], &freq, sizeof (u32));
state->config->send_command(fe, 0x71, sizeof(b), b, NULL, NULL);
@@ -117,10 +117,10 @@
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00 };
- u32 freq;
- u32 sym_rate;
- u32 band;
- u32 lnb_voltage;
+ __be32 freq;
+ __be32 sym_rate;
+ __be32 band;
+ __be32 lnb_voltage;
freq = htonl(p->frequency +
(state->hi_band ? LOF_HI : LOF_LO));
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 3b26fbd3..5ccb0ae 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -793,6 +793,14 @@
if V4L_USB_DRIVERS && USB
+config USB_VIDEO_CLASS
+ tristate "USB Video Class (UVC)"
+ ---help---
+ Support for the USB Video Class (UVC). Currently only video
+ input devices, such as webcams, are supported.
+
+ For more information see: <http://linux-uvc.berlios.de/>
+
source "drivers/media/video/pvrusb2/Kconfig"
source "drivers/media/video/em28xx/Kconfig"
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index dff0d6a..ecbbfaa 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -136,6 +136,8 @@
obj-$(CONFIG_VIDEO_AU0828) += au0828/
+obj-$(CONFIG_USB_VIDEO_CLASS) += uvc/
+
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig
index def10d0..52b2491 100644
--- a/drivers/media/video/au0828/Kconfig
+++ b/drivers/media/video/au0828/Kconfig
@@ -1,7 +1,7 @@
config VIDEO_AU0828
tristate "Auvitek AU0828 support"
- depends on VIDEO_DEV && I2C && INPUT && DVB_CORE && USB
+ depends on I2C && INPUT && DVB_CORE && USB
select I2C_ALGOBIT
select VIDEO_TVEEPROM
select DVB_AU8522 if !DVB_FE_CUSTOMIZE
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index a2a6983..898e123 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -77,8 +77,14 @@
/* Make sure we support the board model */
switch (tv.model) {
+ case 72000: /* WinTV-HVR950q (Retail, IR, ATSC/QAM */
case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and basic analog video */
+ case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */
+ case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */
+ case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */
+ case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and basic analog video */
case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and basic analog video */
+ case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */
break;
default:
printk(KERN_WARNING "%s: warning: "
@@ -175,6 +181,18 @@
.driver_info = AU0828_BOARD_HAUPPAUGE_HVR850 },
{ USB_DEVICE(0x0fe9, 0xd620),
.driver_info = AU0828_BOARD_DVICO_FUSIONHDTV7 },
+ { USB_DEVICE(0x2040, 0x7210),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+ { USB_DEVICE(0x2040, 0x7217),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+ { USB_DEVICE(0x2040, 0x721b),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+ { USB_DEVICE(0x2040, 0x721f),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+ { USB_DEVICE(0x2040, 0x7280),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+ { USB_DEVICE(0x0fd9, 0x0008),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
{ },
};
diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c
index c86a5f17..c6d4705 100644
--- a/drivers/media/video/au0828/au0828-dvb.c
+++ b/drivers/media/video/au0828/au0828-dvb.c
@@ -353,12 +353,6 @@
return -1;
}
- /* Put the analog decoder in standby to keep it quiet */
- au0828_call_i2c_clients(dev, TUNER_SET_STANDBY, NULL);
-
- if (dvb->frontend->ops.analog_ops.standby)
- dvb->frontend->ops.analog_ops.standby(dvb->frontend);
-
/* register everything */
ret = dvb_register(dev);
if (ret < 0) {
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index f20a01c..8ef0424 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -34,6 +34,7 @@
#include <linux/firmware.h>
#include <net/checksum.h>
+#include <asm/unaligned.h>
#include <asm/io.h>
#include "bttvp.h"
@@ -3858,7 +3859,7 @@
ee += i;
/* found a valid descriptor */
- type = be16_to_cpup((u16*)(ee+4));
+ type = get_unaligned_be16((__be16 *)(ee+4));
switch(type) {
/* 848 based */
@@ -3918,7 +3919,7 @@
btv->c.nr, type);
break;
}
- serial = be32_to_cpup((u32*)(ee+6));
+ serial = get_unaligned_be32((__be32 *)(ee+6));
}
printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c
index e5979f7..0af5868 100644
--- a/drivers/media/video/bt8xx/bttv-risc.c
+++ b/drivers/media/video/bt8xx/bttv-risc.c
@@ -48,7 +48,7 @@
{
u32 instructions,line,todo;
struct scatterlist *sg;
- u32 *rp;
+ __le32 *rp;
int rc;
/* estimate risc mem: worst case is one write per page border +
@@ -128,7 +128,8 @@
unsigned int cpadding)
{
unsigned int instructions,line,todo,ylen,chroma;
- u32 *rp,ri;
+ __le32 *rp;
+ u32 ri;
struct scatterlist *ysg;
struct scatterlist *usg;
struct scatterlist *vsg;
@@ -244,7 +245,8 @@
{
int dwords,rc,line,maxy,start,end,skip,nskips;
struct btcx_skiplist *skips;
- u32 *rp,ri,ra;
+ __le32 *rp;
+ u32 ri,ra;
u32 addr;
/* skip list for window clipping */
diff --git a/drivers/media/video/btcx-risc.c b/drivers/media/video/btcx-risc.c
index ce0840c..f42701f 100644
--- a/drivers/media/video/btcx-risc.c
+++ b/drivers/media/video/btcx-risc.c
@@ -63,7 +63,7 @@
struct btcx_riscmem *risc,
unsigned int size)
{
- u32 *cpu;
+ __le32 *cpu;
dma_addr_t dma;
if (NULL != risc->cpu && risc->size < size)
diff --git a/drivers/media/video/btcx-risc.h b/drivers/media/video/btcx-risc.h
index 503e6c6..861bc81 100644
--- a/drivers/media/video/btcx-risc.h
+++ b/drivers/media/video/btcx-risc.h
@@ -2,8 +2,8 @@
*/
struct btcx_riscmem {
unsigned int size;
- u32 *cpu;
- u32 *jmp;
+ __le32 *cpu;
+ __le32 *jmp;
dma_addr_t dma;
};
diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig
index 5f94269..9aefdc5 100644
--- a/drivers/media/video/cx18/Kconfig
+++ b/drivers/media/video/cx18/Kconfig
@@ -10,8 +10,8 @@
select VIDEO_TVEEPROM
select VIDEO_CX2341X
select VIDEO_CS5345
- select DVB_S5H1409
- select MEDIA_TUNER_MXL5005S
+ select DVB_S5H1409 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
---help---
This is a video4linux driver for Conexant cx23418 based
PCI combo video recorder devices.
diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c
index 6686490..faca43e 100644
--- a/drivers/media/video/cx18/cx18-av-core.c
+++ b/drivers/media/video/cx18/cx18-av-core.c
@@ -69,6 +69,58 @@
or_value);
}
+int cx18_av_write_no_acfg(struct cx18 *cx, u16 addr, u8 value, int no_acfg_mask)
+{
+ int retval;
+ u32 saved_reg[8] = {0};
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_AFE) {
+ saved_reg[0] = cx18_av_read4(cx, CXADEC_CHIP_CTRL);
+ saved_reg[1] = cx18_av_read4(cx, CXADEC_AFE_CTRL);
+ }
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_PLL) {
+ saved_reg[2] = cx18_av_read4(cx, CXADEC_PLL_CTRL1);
+ saved_reg[3] = cx18_av_read4(cx, CXADEC_VID_PLL_FRAC);
+ }
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_VID) {
+ saved_reg[4] = cx18_av_read4(cx, CXADEC_HORIZ_TIM_CTRL);
+ saved_reg[5] = cx18_av_read4(cx, CXADEC_VERT_TIM_CTRL);
+ saved_reg[6] = cx18_av_read4(cx, CXADEC_SRC_COMB_CFG);
+ saved_reg[7] = cx18_av_read4(cx, CXADEC_CHROMA_VBIOFF_CFG);
+ }
+
+ retval = cx18_av_write(cx, addr, value);
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_AFE) {
+ cx18_av_write4(cx, CXADEC_CHIP_CTRL, saved_reg[0]);
+ cx18_av_write4(cx, CXADEC_AFE_CTRL, saved_reg[1]);
+ }
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_PLL) {
+ cx18_av_write4(cx, CXADEC_PLL_CTRL1, saved_reg[2]);
+ cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, saved_reg[3]);
+ }
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_VID) {
+ cx18_av_write4(cx, CXADEC_HORIZ_TIM_CTRL, saved_reg[4]);
+ cx18_av_write4(cx, CXADEC_VERT_TIM_CTRL, saved_reg[5]);
+ cx18_av_write4(cx, CXADEC_SRC_COMB_CFG, saved_reg[6]);
+ cx18_av_write4(cx, CXADEC_CHROMA_VBIOFF_CFG, saved_reg[7]);
+ }
+
+ return retval;
+}
+
+int cx18_av_and_or_no_acfg(struct cx18 *cx, u16 addr, unsigned and_mask,
+ u8 or_value, int no_acfg_mask)
+{
+ return cx18_av_write_no_acfg(cx, addr,
+ (cx18_av_read(cx, addr) & and_mask) |
+ or_value, no_acfg_mask);
+}
+
/* ----------------------------------------------------------------------- */
static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
@@ -170,26 +222,30 @@
/* Follow step 8c and 8d of section 3.16 in the cx18_av datasheet */
if (std & V4L2_STD_SECAM)
- cx18_av_write(cx, 0x402, 0);
+ cx18_av_write_no_acfg(cx, 0x402, 0, CXADEC_NO_ACFG_ALL);
else {
- cx18_av_write(cx, 0x402, 0x04);
+ cx18_av_write_no_acfg(cx, 0x402, 0x04, CXADEC_NO_ACFG_ALL);
cx18_av_write(cx, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11);
}
- cx18_av_and_or(cx, 0x401, ~0x60, 0);
- cx18_av_and_or(cx, 0x401, ~0x60, 0x60);
+ cx18_av_and_or_no_acfg(cx, 0x401, ~0x60, 0,
+ CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID);
+ cx18_av_and_or_no_acfg(cx, 0x401, ~0x60, 0x60,
+ CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID);
if (std & V4L2_STD_525_60) {
if (std == V4L2_STD_NTSC_M_JP) {
/* Japan uses EIAJ audio standard */
cx18_av_write(cx, 0x808, 0xf7);
+ cx18_av_write(cx, 0x80b, 0x02);
} else if (std == V4L2_STD_NTSC_M_KR) {
/* South Korea uses A2 audio standard */
cx18_av_write(cx, 0x808, 0xf8);
+ cx18_av_write(cx, 0x80b, 0x03);
} else {
/* Others use the BTSC audio standard */
cx18_av_write(cx, 0x808, 0xf6);
+ cx18_av_write(cx, 0x80b, 0x01);
}
- cx18_av_write(cx, 0x80b, 0x00);
} else if (std & V4L2_STD_PAL) {
/* Follow tuner change procedure for PAL */
cx18_av_write(cx, 0x808, 0xff);
@@ -226,7 +282,7 @@
if ((vid_input & ~0xff0) ||
luma < CX18_AV_SVIDEO_LUMA1 ||
- luma > CX18_AV_SVIDEO_LUMA4 ||
+ luma > CX18_AV_SVIDEO_LUMA8 ||
chroma < CX18_AV_SVIDEO_CHROMA4 ||
chroma > CX18_AV_SVIDEO_CHROMA8) {
CX18_ERR("0x%04x is not a valid video input!\n",
@@ -260,7 +316,8 @@
cx18_av_write(cx, 0x103, reg);
/* Set INPUT_MODE to Composite (0) or S-Video (1) */
- cx18_av_and_or(cx, 0x401, ~0x6, is_composite ? 0 : 0x02);
+ cx18_av_and_or_no_acfg(cx, 0x401, ~0x6, is_composite ? 0 : 0x02,
+ CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID);
/* Set CH_SEL_ADC2 to 1 if input comes from CH3 */
cx18_av_and_or(cx, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0);
/* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */
@@ -316,12 +373,12 @@
This happens for example with the Yuan MPC622. */
if (fmt >= 4 && fmt < 8) {
/* Set format to NTSC-M */
- cx18_av_and_or(cx, 0x400, ~0xf, 1);
+ cx18_av_and_or_no_acfg(cx, 0x400, ~0xf, 1, CXADEC_NO_ACFG_AFE);
/* Turn off LCOMB */
cx18_av_and_or(cx, 0x47b, ~6, 0);
}
- cx18_av_and_or(cx, 0x400, ~0xf, fmt);
- cx18_av_and_or(cx, 0x403, ~0x3, pal_m);
+ cx18_av_and_or_no_acfg(cx, 0x400, ~0xf, fmt, CXADEC_NO_ACFG_AFE);
+ cx18_av_and_or_no_acfg(cx, 0x403, ~0x3, pal_m, CXADEC_NO_ACFG_ALL);
cx18_av_vbi_setup(cx);
input_change(cx);
return 0;
@@ -741,8 +798,8 @@
{
struct cx18_av_state *state = &cx->av_state;
u8 download_ctl = cx18_av_read(cx, 0x803);
- u8 mod_det_stat0 = cx18_av_read(cx, 0x805);
- u8 mod_det_stat1 = cx18_av_read(cx, 0x804);
+ u8 mod_det_stat0 = cx18_av_read(cx, 0x804);
+ u8 mod_det_stat1 = cx18_av_read(cx, 0x805);
u8 audio_config = cx18_av_read(cx, 0x808);
u8 pref_mode = cx18_av_read(cx, 0x809);
u8 afc0 = cx18_av_read(cx, 0x80b);
@@ -760,12 +817,12 @@
case 0x12: p = "dual with SAP"; break;
case 0x14: p = "tri with SAP"; break;
case 0xfe: p = "forced mode"; break;
- default: p = "not defined";
+ default: p = "not defined"; break;
}
CX18_INFO("Detected audio mode: %s\n", p);
switch (mod_det_stat1) {
- case 0x00: p = "BTSC"; break;
+ case 0x00: p = "not defined"; break;
case 0x01: p = "EIAJ"; break;
case 0x02: p = "A2-M"; break;
case 0x03: p = "A2-BG"; break;
@@ -779,8 +836,13 @@
case 0x0b: p = "NICAM-I"; break;
case 0x0c: p = "NICAM-L"; break;
case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break;
+ case 0x0e: p = "IF FM Radio"; break;
+ case 0x0f: p = "BTSC"; break;
+ case 0x10: p = "detected chrominance"; break;
+ case 0xfd: p = "unknown audio standard"; break;
+ case 0xfe: p = "forced audio standard"; break;
case 0xff: p = "no detected audio standard"; break;
- default: p = "not defined";
+ default: p = "not defined"; break;
}
CX18_INFO("Detected audio standard: %s\n", p);
CX18_INFO("Audio muted: %s\n",
@@ -789,22 +851,23 @@
(download_ctl & 0x10) ? "running" : "stopped");
switch (audio_config >> 4) {
- case 0x00: p = "BTSC"; break;
- case 0x01: p = "EIAJ"; break;
- case 0x02: p = "A2-M"; break;
- case 0x03: p = "A2-BG"; break;
- case 0x04: p = "A2-DK1"; break;
- case 0x05: p = "A2-DK2"; break;
- case 0x06: p = "A2-DK3"; break;
- case 0x07: p = "A1 (6.0 MHz FM Mono)"; break;
- case 0x08: p = "AM-L"; break;
- case 0x09: p = "NICAM-BG"; break;
- case 0x0a: p = "NICAM-DK"; break;
- case 0x0b: p = "NICAM-I"; break;
- case 0x0c: p = "NICAM-L"; break;
- case 0x0d: p = "FM radio"; break;
+ case 0x00: p = "undefined"; break;
+ case 0x01: p = "BTSC"; break;
+ case 0x02: p = "EIAJ"; break;
+ case 0x03: p = "A2-M"; break;
+ case 0x04: p = "A2-BG"; break;
+ case 0x05: p = "A2-DK1"; break;
+ case 0x06: p = "A2-DK2"; break;
+ case 0x07: p = "A2-DK3"; break;
+ case 0x08: p = "A1 (6.0 MHz FM Mono)"; break;
+ case 0x09: p = "AM-L"; break;
+ case 0x0a: p = "NICAM-BG"; break;
+ case 0x0b: p = "NICAM-DK"; break;
+ case 0x0c: p = "NICAM-I"; break;
+ case 0x0d: p = "NICAM-L"; break;
+ case 0x0e: p = "FM radio"; break;
case 0x0f: p = "automatic detection"; break;
- default: p = "undefined";
+ default: p = "undefined"; break;
}
CX18_INFO("Configured audio standard: %s\n", p);
@@ -815,12 +878,9 @@
case 0x02: p = "MONO3 (STEREO forced MONO)"; break;
case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break;
case 0x04: p = "STEREO"; break;
- case 0x05: p = "DUAL1 (AB)"; break;
- case 0x06: p = "DUAL2 (AC) (FM)"; break;
- case 0x07: p = "DUAL3 (BC) (FM)"; break;
- case 0x08: p = "DUAL4 (AC) (AM)"; break;
- case 0x09: p = "DUAL5 (BC) (AM)"; break;
- case 0x0a: p = "SAP"; break;
+ case 0x05: p = "DUAL1 (AC)"; break;
+ case 0x06: p = "DUAL2 (BC)"; break;
+ case 0x07: p = "DUAL3 (AB)"; break;
default: p = "undefined";
}
CX18_INFO("Configured audio mode: %s\n", p);
@@ -835,9 +895,11 @@
case 0x06: p = "BTSC"; break;
case 0x07: p = "EIAJ"; break;
case 0x08: p = "A2-M"; break;
- case 0x09: p = "FM Radio"; break;
+ case 0x09: p = "FM Radio (4.5 MHz)"; break;
+ case 0x0a: p = "FM Radio (5.5 MHz)"; break;
+ case 0x0b: p = "S-Video"; break;
case 0x0f: p = "automatic standard and mode detection"; break;
- default: p = "undefined";
+ default: p = "undefined"; break;
}
CX18_INFO("Configured audio system: %s\n", p);
}
@@ -857,22 +919,24 @@
case 5: p = "language AC"; break;
case 6: p = "language BC"; break;
case 7: p = "language AB"; break;
- default: p = "undefined";
+ default: p = "undefined"; break;
}
CX18_INFO("Preferred audio mode: %s\n", p);
if ((audio_config & 0xf) == 0xf) {
- switch ((afc0 >> 2) & 0x1) {
+ switch ((afc0 >> 3) & 0x1) {
case 0: p = "system DK"; break;
case 1: p = "system L"; break;
}
CX18_INFO("Selected 65 MHz format: %s\n", p);
- switch (afc0 & 0x3) {
- case 0: p = "BTSC"; break;
- case 1: p = "EIAJ"; break;
- case 2: p = "A2-M"; break;
- default: p = "undefined";
+ switch (afc0 & 0x7) {
+ case 0: p = "Chroma"; break;
+ case 1: p = "BTSC"; break;
+ case 2: p = "EIAJ"; break;
+ case 3: p = "A2-M"; break;
+ case 4: p = "autodetect"; break;
+ default: p = "undefined"; break;
}
CX18_INFO("Selected 45 MHz format: %s\n", p);
}
diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h
index 786901d..c172823 100644
--- a/drivers/media/video/cx18/cx18-av-core.h
+++ b/drivers/media/video/cx18/cx18-av-core.h
@@ -37,12 +37,16 @@
CX18_AV_COMPOSITE7,
CX18_AV_COMPOSITE8,
- /* S-Video inputs consist of one luma input (In1-In4) ORed with one
+ /* S-Video inputs consist of one luma input (In1-In8) ORed with one
chroma input (In5-In8) */
CX18_AV_SVIDEO_LUMA1 = 0x10,
CX18_AV_SVIDEO_LUMA2 = 0x20,
CX18_AV_SVIDEO_LUMA3 = 0x30,
CX18_AV_SVIDEO_LUMA4 = 0x40,
+ CX18_AV_SVIDEO_LUMA5 = 0x50,
+ CX18_AV_SVIDEO_LUMA6 = 0x60,
+ CX18_AV_SVIDEO_LUMA7 = 0x70,
+ CX18_AV_SVIDEO_LUMA8 = 0x80,
CX18_AV_SVIDEO_CHROMA4 = 0x400,
CX18_AV_SVIDEO_CHROMA5 = 0x500,
CX18_AV_SVIDEO_CHROMA6 = 0x600,
@@ -291,14 +295,24 @@
#define CXADEC_SELECT_AUDIO_STANDARD_FM 0xF9 /* FM radio */
#define CXADEC_SELECT_AUDIO_STANDARD_AUTO 0xFF /* Auto detect */
+/* Flags on what to preserve on write to 0x400-0x403 with cx18_av_.*_no_acfg()*/
+#define CXADEC_NO_ACFG_AFE 0x01 /* Preserve 0x100-0x107 */
+#define CXADEC_NO_ACFG_PLL 0x02 /* Preserve 0x108-0x10f */
+#define CXADEC_NO_ACFG_VID 0x04 /* Preserve 0x470-0x47f */
+#define CXADEC_NO_ACFG_ALL 0x07
+
/* ----------------------------------------------------------------------- */
/* cx18_av-core.c */
int cx18_av_write(struct cx18 *cx, u16 addr, u8 value);
int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value);
+int cx18_av_write_no_acfg(struct cx18 *cx, u16 addr, u8 value,
+ int no_acfg_mask);
u8 cx18_av_read(struct cx18 *cx, u16 addr);
u32 cx18_av_read4(struct cx18 *cx, u16 addr);
int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned mask, u8 value);
int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 mask, u32 value);
+int cx18_av_and_or_no_acfg(struct cx18 *cx, u16 addr, unsigned mask, u8 value,
+ int no_acfg_mask);
int cx18_av_cmd(struct cx18 *cx, unsigned int cmd, void *arg);
/* ----------------------------------------------------------------------- */
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index 553adbf..c26e0ef 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -23,6 +23,7 @@
#include "cx18-driver.h"
#include "cx18-cards.h"
+#include "cx18-av-core.h"
#include "cx18-i2c.h"
#include <media/cs5345.h>
@@ -54,22 +55,22 @@
.hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER |
CX18_HW_CS5345 | CX18_HW_DVB,
.video_inputs = {
- { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 },
- { CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 },
- { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE3 },
- { CX18_CARD_INPUT_SVIDEO2, 2, CX23418_SVIDEO2 },
- { CX18_CARD_INPUT_COMPOSITE2, 2, CX23418_COMPOSITE4 },
+ { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 },
+ { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 },
+ { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 },
+ { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO2 },
+ { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 },
},
.audio_inputs = {
{ CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
+ CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
{ CX18_CARD_INPUT_LINE_IN1,
- CX23418_AUDIO_SERIAL, CS5345_IN_2 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_2 },
{ CX18_CARD_INPUT_LINE_IN2,
- CX23418_AUDIO_SERIAL, CS5345_IN_2 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_3 },
},
.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO_SERIAL, 0 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_4 },
.ddr = {
/* ESMT M13S128324A-5B memory */
.chip_config = 0x003,
@@ -81,6 +82,11 @@
},
.gpio_init.initial_value = 0x3001,
.gpio_init.direction = 0x3001,
+ .gpio_i2c_slave_reset = {
+ .active_lo_mask = 0x3001,
+ .msecs_asserted = 10,
+ .msecs_recovery = 40,
+ },
.i2c = &cx18_i2c_std,
};
@@ -94,22 +100,22 @@
.hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER |
CX18_HW_CS5345 | CX18_HW_DVB,
.video_inputs = {
- { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 },
- { CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 },
- { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE3 },
- { CX18_CARD_INPUT_SVIDEO2, 2, CX23418_SVIDEO2 },
- { CX18_CARD_INPUT_COMPOSITE2, 2, CX23418_COMPOSITE4 },
+ { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 },
+ { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 },
+ { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 },
+ { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO2 },
+ { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 },
},
.audio_inputs = {
{ CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
+ CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
{ CX18_CARD_INPUT_LINE_IN1,
- CX23418_AUDIO_SERIAL, CS5345_IN_2 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_2 },
{ CX18_CARD_INPUT_LINE_IN2,
- CX23418_AUDIO_SERIAL, CS5345_IN_2 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_3 },
},
.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO_SERIAL, 0 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_4 },
.ddr = {
/* Samsung K4D263238G-VC33 memory */
.chip_config = 0x003,
@@ -121,12 +127,17 @@
},
.gpio_init.initial_value = 0x3001,
.gpio_init.direction = 0x3001,
+ .gpio_i2c_slave_reset = {
+ .active_lo_mask = 0x3001,
+ .msecs_asserted = 10,
+ .msecs_recovery = 40,
+ },
.i2c = &cx18_i2c_std,
};
/* ------------------------------------------------------------------------- */
-/* Compro VideoMate H900: not working at the moment! */
+/* Compro VideoMate H900: note that this card is analog only! */
static const struct cx18_card_pci_info cx18_pci_h900[] = {
{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_COMPRO, 0xe100 },
@@ -136,24 +147,24 @@
static const struct cx18_card cx18_card_h900 = {
.type = CX18_CARD_COMPRO_H900,
.name = "Compro VideoMate H900",
- .comment = "DVB & VBI are not yet supported\n",
+ .comment = "VBI is not yet supported\n",
.v4l2_capabilities = CX18_CAP_ENCODER,
.hw_audio_ctrl = CX18_HW_CX23418,
.hw_all = CX18_HW_TUNER,
.video_inputs = {
- { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE2 },
+ { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 },
{ CX18_CARD_INPUT_SVIDEO1, 1,
- CX23418_SVIDEO_LUMA3 | CX23418_SVIDEO_CHROMA4 },
- { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE1 },
+ CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+ { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
},
.audio_inputs = {
{ CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO8, 0 },
+ CX18_AV_AUDIO8, 0 },
{ CX18_CARD_INPUT_LINE_IN1,
- CX23418_AUDIO_SERIAL, 0 },
+ CX18_AV_AUDIO_SERIAL, 0 },
},
.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO_SERIAL, 0 },
+ CX18_AV_AUDIO_SERIAL, 0 },
.tuners = {
{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
},
@@ -183,23 +194,26 @@
static const struct cx18_card cx18_card_mpc718 = {
.type = CX18_CARD_YUAN_MPC718,
.name = "Yuan MPC718",
- .comment = "Not yet supported!\n",
- .v4l2_capabilities = 0,
+ .comment = "Some Composite and S-Video inputs are currently working.\n",
+ .v4l2_capabilities = CX18_CAP_ENCODER,
.hw_audio_ctrl = CX18_HW_CX23418,
.hw_all = CX18_HW_TUNER,
.video_inputs = {
- { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 },
- { CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 },
- { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE3 },
+ { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 },
+ { CX18_CARD_INPUT_SVIDEO1, 1,
+ CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+ { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
+ { CX18_CARD_INPUT_SVIDEO2, 2,
+ CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
+ { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
+ { CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 },
},
.audio_inputs = {
- { CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO8, 0 },
- { CX18_CARD_INPUT_LINE_IN1,
- CX23418_AUDIO_SERIAL, 0 },
+ { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 },
+ { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL, 0 },
+ { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL, 0 },
},
- .radio_input = { CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO_SERIAL, 0 },
+ .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 0 },
.tuners = {
/* XC3028 tuner */
{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h
index bccb67f..dc2dd94 100644
--- a/drivers/media/video/cx18/cx18-cards.h
+++ b/drivers/media/video/cx18/cx18-cards.h
@@ -36,36 +36,6 @@
#define CX18_CARD_INPUT_COMPOSITE2 5
#define CX18_CARD_INPUT_COMPOSITE3 6
-enum cx34180_video_input {
- /* Composite video inputs In1-In8 */
- CX23418_COMPOSITE1 = 1,
- CX23418_COMPOSITE2,
- CX23418_COMPOSITE3,
- CX23418_COMPOSITE4,
- CX23418_COMPOSITE5,
- CX23418_COMPOSITE6,
- CX23418_COMPOSITE7,
- CX23418_COMPOSITE8,
-
- /* S-Video inputs consist of one luma input (In1-In4) ORed with one
- chroma input (In5-In8) */
- CX23418_SVIDEO_LUMA1 = 0x10,
- CX23418_SVIDEO_LUMA2 = 0x20,
- CX23418_SVIDEO_LUMA3 = 0x30,
- CX23418_SVIDEO_LUMA4 = 0x40,
- CX23418_SVIDEO_CHROMA4 = 0x400,
- CX23418_SVIDEO_CHROMA5 = 0x500,
- CX23418_SVIDEO_CHROMA6 = 0x600,
- CX23418_SVIDEO_CHROMA7 = 0x700,
- CX23418_SVIDEO_CHROMA8 = 0x800,
-
- /* S-Video aliases for common luma/chroma combinations */
- CX23418_SVIDEO1 = 0x510,
- CX23418_SVIDEO2 = 0x620,
- CX23418_SVIDEO3 = 0x730,
- CX23418_SVIDEO4 = 0x840,
-};
-
/* audio inputs */
#define CX18_CARD_INPUT_AUD_TUNER 1
#define CX18_CARD_INPUT_LINE_IN1 2
@@ -75,16 +45,6 @@
#define CX18_CARD_MAX_AUDIO_INPUTS 3
#define CX18_CARD_MAX_TUNERS 2
-enum cx23418_audio_input {
- /* Audio inputs: serial or In4-In8 */
- CX23418_AUDIO_SERIAL,
- CX23418_AUDIO4 = 4,
- CX23418_AUDIO5,
- CX23418_AUDIO6,
- CX23418_AUDIO7,
- CX23418_AUDIO8,
-};
-
/* V4L2 capability aliases */
#define CX18_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \
V4L2_CAP_AUDIO | V4L2_CAP_READWRITE)
@@ -118,6 +78,13 @@
u32 initial_value;
};
+struct cx18_gpio_i2c_slave_reset {
+ u32 active_lo_mask; /* GPIO outputs that reset i2c chips when low */
+ u32 active_hi_mask; /* GPIO outputs that reset i2c chips when high */
+ int msecs_asserted; /* time period reset must remain asserted */
+ int msecs_recovery; /* time after deassert for chips to be ready */
+};
+
struct cx18_card_tuner {
v4l2_std_id std; /* standard for which the tuner is suitable */
int tuner; /* tuner ID (from tuner.h) */
@@ -154,7 +121,8 @@
/* GPIO card-specific settings */
u8 xceive_pin; /* XCeive tuner GPIO reset pin */
- struct cx18_gpio_init gpio_init;
+ struct cx18_gpio_init gpio_init;
+ struct cx18_gpio_i2c_slave_reset gpio_i2c_slave_reset;
struct cx18_card_tuner tuners[CX18_CARD_MAX_TUNERS];
struct cx18_card_tuner_i2c *i2c;
diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c
index 2bdac5e..87cf410 100644
--- a/drivers/media/video/cx18/cx18-controls.c
+++ b/drivers/media/video/cx18/cx18-controls.c
@@ -159,7 +159,7 @@
{
if (!(cx->v4l2_cap & V4L2_CAP_SLICED_VBI_CAPTURE))
return -EINVAL;
- if (atomic_read(&cx->capturing) > 0)
+ if (atomic_read(&cx->ana_capturing) > 0)
return -EBUSY;
/* First try to allocate sliced VBI buffers if needed. */
@@ -235,7 +235,7 @@
CX18_DEBUG_IOCTL("VIDIOC_S_EXT_CTRLS\n");
if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) {
struct cx2341x_mpeg_params p = cx->params;
- int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->capturing), arg, cmd);
+ int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->ana_capturing), arg, cmd);
if (err)
return err;
@@ -295,7 +295,7 @@
CX18_DEBUG_IOCTL("VIDIOC_TRY_EXT_CTRLS\n");
if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG)
return cx2341x_ext_ctrls(&cx->params,
- atomic_read(&cx->capturing), arg, cmd);
+ atomic_read(&cx->ana_capturing), arg, cmd);
return -EINVAL;
}
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 0dd4e05..2b810bb 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -670,7 +670,7 @@
cx18_init_power(cx, 1);
cx18_init_memory(cx);
- cx->scb = (struct cx18_scb *)(cx->enc_mem + SCB_OFFSET);
+ cx->scb = (struct cx18_scb __iomem *)(cx->enc_mem + SCB_OFFSET);
cx18_init_scb(cx);
cx18_gpio_init(cx);
@@ -751,17 +751,6 @@
if (cx->options.radio > 0)
cx->v4l2_cap |= V4L2_CAP_RADIO;
- retval = cx18_streams_setup(cx);
- if (retval) {
- CX18_ERR("Error %d setting up streams\n", retval);
- goto free_irq;
- }
- retval = cx18_streams_register(cx);
- if (retval) {
- CX18_ERR("Error %d registering devices\n", retval);
- goto free_streams;
- }
-
if (cx->options.tuner > -1) {
struct tuner_setup setup;
@@ -788,7 +777,16 @@
are not. */
cx->tuner_std = cx->std;
- cx18_init_on_first_open(cx);
+ retval = cx18_streams_setup(cx);
+ if (retval) {
+ CX18_ERR("Error %d setting up streams\n", retval);
+ goto free_irq;
+ }
+ retval = cx18_streams_register(cx);
+ if (retval) {
+ CX18_ERR("Error %d registering devices\n", retval);
+ goto free_streams;
+ }
CX18_INFO("Initialized card #%d: %s\n", cx->num, cx->card_name);
@@ -889,7 +887,7 @@
/* Stop all captures */
CX18_DEBUG_INFO("Stopping all streams\n");
- if (atomic_read(&cx->capturing) > 0)
+ if (atomic_read(&cx->tot_capturing) > 0)
cx18_stop_all_captures(cx);
/* Interrupts */
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index a2a6c58..de14ab5 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -358,7 +358,7 @@
u32 v4l2_cap; /* V4L2 capabilities of card */
u32 hw_flags; /* Hardware description of the board */
unsigned mdl_offset;
- struct cx18_scb *scb; /* pointer to SCB */
+ struct cx18_scb __iomem *scb; /* pointer to SCB */
struct cx18_av_state av_state;
@@ -380,7 +380,8 @@
int stream_buf_size[CX18_MAX_STREAMS]; /* Stream buffer size */
struct cx18_stream streams[CX18_MAX_STREAMS]; /* Stream data */
unsigned long i_flags; /* global cx18 flags */
- atomic_t capturing; /* count number of active capture streams */
+ atomic_t ana_capturing; /* count number of active analog capture streams */
+ atomic_t tot_capturing; /* total count number of active capture streams */
spinlock_t lock; /* lock access to this struct */
int search_pack_header;
@@ -423,6 +424,10 @@
struct mutex i2c_bus_lock[2];
struct i2c_client *i2c_clients[I2C_CLIENTS_MAX];
+ /* gpio */
+ u32 gpio_dir;
+ u32 gpio_val;
+
/* v4l2 and User settings */
/* codec settings */
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index c974417..cae3898 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -69,11 +69,21 @@
struct dvb_demux *demux = feed->demux;
struct cx18_stream *stream = (struct cx18_stream *) demux->priv;
struct cx18 *cx = stream->cx;
- int ret = -EINVAL;
+ int ret;
u32 v;
CX18_DEBUG_INFO("Start feed: pid = 0x%x index = %d\n",
feed->pid, feed->index);
+
+ mutex_lock(&cx->serialize_lock);
+ ret = cx18_init_on_first_open(cx);
+ mutex_unlock(&cx->serialize_lock);
+ if (ret) {
+ CX18_ERR("Failed to initialize firmware starting DVB feed\n");
+ return ret;
+ }
+ ret = -EINVAL;
+
switch (cx->card->type) {
case CX18_CARD_HVR_1600_ESMT:
case CX18_CARD_HVR_1600_SAMSUNG:
@@ -101,6 +111,11 @@
if (stream->dvb.feeding++ == 0) {
CX18_DEBUG_INFO("Starting Transport DMA\n");
ret = cx18_start_v4l2_encode_stream(stream);
+ if (ret < 0) {
+ CX18_DEBUG_INFO(
+ "Failed to start Transport DMA\n");
+ stream->dvb.feeding--;
+ }
} else
ret = 0;
mutex_unlock(&stream->dvb.feedlock);
diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c
index 0b3141d..1e537fe 100644
--- a/drivers/media/video/cx18/cx18-fileops.c
+++ b/drivers/media/video/cx18/cx18-fileops.c
@@ -318,7 +318,7 @@
size_t tot_written = 0;
int single_frame = 0;
- if (atomic_read(&cx->capturing) == 0 && s->id == -1) {
+ if (atomic_read(&cx->ana_capturing) == 0 && s->id == -1) {
/* shouldn't happen */
CX18_DEBUG_WARN("Stream %s not initialized before read\n",
s->name);
@@ -361,7 +361,8 @@
cx18_enqueue(s, buf, &s->q_free);
cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5,
s->handle,
- (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+ (void __iomem *)&cx->scb->cpu_mdl[buf->id] -
+ cx->enc_mem,
1, buf->id, s->buf_size);
} else
cx18_enqueue(s, buf, &s->q_io);
@@ -581,7 +582,7 @@
cx18_call_i2c_clients(cx, VIDIOC_S_STD, &cx->std);
/* Select correct audio input (i.e. TV tuner or Line in) */
cx18_audio_set_io(cx);
- if (atomic_read(&cx->capturing) > 0) {
+ if (atomic_read(&cx->ana_capturing) > 0) {
/* Undo video mute */
cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle,
cx->params.video_mute |
@@ -627,7 +628,7 @@
}
if (!test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) {
- if (atomic_read(&cx->capturing) > 0) {
+ if (atomic_read(&cx->ana_capturing) > 0) {
/* switching to radio while capture is
in progress is not polite */
cx18_release_stream(s);
@@ -694,7 +695,7 @@
void cx18_mute(struct cx18 *cx)
{
- if (atomic_read(&cx->capturing))
+ if (atomic_read(&cx->ana_capturing))
cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2,
cx18_find_handle(cx), 1);
CX18_DEBUG_INFO("Mute\n");
@@ -702,7 +703,7 @@
void cx18_unmute(struct cx18 *cx)
{
- if (atomic_read(&cx->capturing)) {
+ if (atomic_read(&cx->ana_capturing)) {
cx18_msleep_timeout(100, 0);
cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2,
cx18_find_handle(cx), 12);
diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c
index bb8bc86..b302833 100644
--- a/drivers/media/video/cx18/cx18-gpio.c
+++ b/drivers/media/video/cx18/cx18-gpio.c
@@ -35,9 +35,6 @@
#define CX18_REG_GPIO_OUT2 0xc78104
#define CX18_REG_GPIO_DIR2 0xc7810c
-static u32 gpio_dir;
-static u32 gpio_val;
-
/*
* HVR-1600 GPIO pins, courtesy of Hauppauge:
*
@@ -49,25 +46,54 @@
static void gpio_write(struct cx18 *cx)
{
- write_reg((gpio_dir & 0xffff) << 16, CX18_REG_GPIO_DIR1);
- write_reg(((gpio_dir & 0xffff) << 16) | (gpio_val & 0xffff),
+ u32 dir = cx->gpio_dir;
+ u32 val = cx->gpio_val;
+
+ write_reg((dir & 0xffff) << 16, CX18_REG_GPIO_DIR1);
+ write_reg(((dir & 0xffff) << 16) | (val & 0xffff),
CX18_REG_GPIO_OUT1);
- write_reg(gpio_dir & 0xffff0000, CX18_REG_GPIO_DIR2);
- write_reg((gpio_dir & 0xffff0000) | ((gpio_val & 0xffff0000) >> 16),
+ write_reg(dir & 0xffff0000, CX18_REG_GPIO_DIR2);
+ write_reg_sync((dir & 0xffff0000) | ((val & 0xffff0000) >> 16),
CX18_REG_GPIO_OUT2);
}
+void cx18_reset_i2c_slaves_gpio(struct cx18 *cx)
+{
+ const struct cx18_gpio_i2c_slave_reset *p;
+
+ p = &cx->card->gpio_i2c_slave_reset;
+
+ if ((p->active_lo_mask | p->active_hi_mask) == 0)
+ return;
+
+ /* Assuming that the masks are a subset of the bits in gpio_dir */
+
+ /* Assert */
+ cx->gpio_val =
+ (cx->gpio_val | p->active_hi_mask) & ~(p->active_lo_mask);
+ gpio_write(cx);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(p->msecs_asserted));
+
+ /* Deassert */
+ cx->gpio_val =
+ (cx->gpio_val | p->active_lo_mask) & ~(p->active_hi_mask);
+ gpio_write(cx);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(p->msecs_recovery));
+}
+
void cx18_gpio_init(struct cx18 *cx)
{
- gpio_dir = cx->card->gpio_init.direction;
- gpio_val = cx->card->gpio_init.initial_value;
+ cx->gpio_dir = cx->card->gpio_init.direction;
+ cx->gpio_val = cx->card->gpio_init.initial_value;
- if (gpio_dir == 0)
+ if (cx->card->tuners[0].tuner == TUNER_XC2028) {
+ cx->gpio_dir |= 1 << cx->card->xceive_pin;
+ cx->gpio_val |= 1 << cx->card->xceive_pin;
+ }
+
+ if (cx->gpio_dir == 0)
return;
- gpio_dir |= 1 << cx->card->xceive_pin;
- gpio_val |= 1 << cx->card->xceive_pin;
-
CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n",
read_reg(CX18_REG_GPIO_DIR1), read_reg(CX18_REG_GPIO_DIR2),
read_reg(CX18_REG_GPIO_OUT1), read_reg(CX18_REG_GPIO_OUT2));
@@ -86,13 +112,12 @@
return 0;
CX18_DEBUG_INFO("Resetting tuner\n");
- gpio_dir |= 1 << cx->card->xceive_pin;
- gpio_val &= ~(1 << cx->card->xceive_pin);
+ cx->gpio_val &= ~(1 << cx->card->xceive_pin);
gpio_write(cx);
schedule_timeout_interruptible(msecs_to_jiffies(1));
- gpio_val |= 1 << cx->card->xceive_pin;
+ cx->gpio_val |= 1 << cx->card->xceive_pin;
gpio_write(cx);
schedule_timeout_interruptible(msecs_to_jiffies(1));
return 0;
diff --git a/drivers/media/video/cx18/cx18-gpio.h b/drivers/media/video/cx18/cx18-gpio.h
index 41bac88..525c328 100644
--- a/drivers/media/video/cx18/cx18-gpio.h
+++ b/drivers/media/video/cx18/cx18-gpio.h
@@ -21,4 +21,5 @@
*/
void cx18_gpio_init(struct cx18 *cx);
+void cx18_reset_i2c_slaves_gpio(struct cx18 *cx);
int cx18_reset_tuner_gpio(void *dev, int cmd, int value);
diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index 1d6c51a..680bc4e 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -405,6 +405,8 @@
cx18_setscl(&cx->i2c_algo_cb_data[1], 1);
cx18_setsda(&cx->i2c_algo_cb_data[1], 1);
+ cx18_reset_i2c_slaves_gpio(cx);
+
return i2c_bit_add_bus(&cx->i2c_adap[0]) ||
i2c_bit_add_bus(&cx->i2c_adap[1]);
}
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index dbdcb86..4151f1e 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -247,7 +247,7 @@
if (!set_fmt || (cx->params.width == w && cx->params.height == h))
return 0;
- if (atomic_read(&cx->capturing) > 0)
+ if (atomic_read(&cx->ana_capturing) > 0)
return -EBUSY;
cx->params.width = w;
@@ -264,7 +264,7 @@
if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
if (set_fmt && streamtype == CX18_ENC_STREAM_TYPE_VBI &&
cx->vbi.sliced_in->service_set &&
- atomic_read(&cx->capturing) > 0)
+ atomic_read(&cx->ana_capturing) > 0)
return -EBUSY;
if (set_fmt) {
cx->vbi.sliced_in->service_set = 0;
@@ -293,7 +293,7 @@
return 0;
if (set == 0)
return -EINVAL;
- if (atomic_read(&cx->capturing) > 0 && cx->vbi.sliced_in->service_set == 0)
+ if (atomic_read(&cx->ana_capturing) > 0 && cx->vbi.sliced_in->service_set == 0)
return -EBUSY;
cx18_av_cmd(cx, VIDIOC_S_FMT, fmt);
memcpy(cx->vbi.sliced_in, vbifmt, sizeof(*cx->vbi.sliced_in));
@@ -581,7 +581,7 @@
break;
if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags) ||
- atomic_read(&cx->capturing) > 0) {
+ atomic_read(&cx->ana_capturing) > 0) {
/* Switching standard would turn off the radio or mess
with already running streams, prevent that by
returning EBUSY. */
@@ -677,7 +677,7 @@
enc->flags = 0;
if (try)
return 0;
- if (!atomic_read(&cx->capturing))
+ if (!atomic_read(&cx->ana_capturing))
return -EPERM;
if (test_and_set_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags))
return 0;
@@ -689,7 +689,7 @@
enc->flags = 0;
if (try)
return 0;
- if (!atomic_read(&cx->capturing))
+ if (!atomic_read(&cx->ana_capturing))
return -EPERM;
if (!test_and_clear_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags))
return 0;
diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c
index 6e14f8b..25114a5 100644
--- a/drivers/media/video/cx18/cx18-irq.c
+++ b/drivers/media/video/cx18/cx18-irq.c
@@ -75,7 +75,7 @@
cx18_buf_sync_for_device(s, buf);
cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
- (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+ (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
1, buf->id, s->buf_size);
} else
set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags);
@@ -161,13 +161,15 @@
*/
if (sw2) {
- if (sw2 & (cx->scb->cpu2hpu_irq_ack | cx->scb->cpu2epu_irq_ack))
+ if (sw2 & (readl(&cx->scb->cpu2hpu_irq_ack) |
+ readl(&cx->scb->cpu2epu_irq_ack)))
wake_up(&cx->mb_cpu_waitq);
- if (sw2 & (cx->scb->apu2hpu_irq_ack | cx->scb->apu2epu_irq_ack))
+ if (sw2 & (readl(&cx->scb->apu2hpu_irq_ack) |
+ readl(&cx->scb->apu2epu_irq_ack)))
wake_up(&cx->mb_apu_waitq);
- if (sw2 & cx->scb->epu2hpu_irq_ack)
+ if (sw2 & readl(&cx->scb->epu2hpu_irq_ack))
wake_up(&cx->mb_epu_waitq);
- if (sw2 & cx->scb->hpu2epu_irq_ack)
+ if (sw2 & readl(&cx->scb->hpu2epu_irq_ack))
wake_up(&cx->mb_hpu_waitq);
}
diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c
index 0c5f328..2a5ccef 100644
--- a/drivers/media/video/cx18/cx18-mailbox.c
+++ b/drivers/media/video/cx18/cx18-mailbox.c
@@ -94,10 +94,10 @@
return NULL;
}
-static struct cx18_mailbox *cx18_mb_is_complete(struct cx18 *cx, int rpu,
+static struct cx18_mailbox __iomem *cx18_mb_is_complete(struct cx18 *cx, int rpu,
u32 *state, u32 *irq, u32 *req)
{
- struct cx18_mailbox *mb = NULL;
+ struct cx18_mailbox __iomem *mb = NULL;
int wait_count = 0;
u32 ack;
@@ -142,7 +142,7 @@
long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb)
{
const struct cx18_api_info *info = find_api_info(mb->cmd);
- struct cx18_mailbox *ack_mb;
+ struct cx18_mailbox __iomem *ack_mb;
u32 ack_irq;
u8 rpu = CPU;
@@ -182,7 +182,7 @@
{
const struct cx18_api_info *info = find_api_info(cmd);
u32 state = 0, irq = 0, req, oldreq, err;
- struct cx18_mailbox *mb;
+ struct cx18_mailbox __iomem *mb;
wait_queue_head_t *waitq;
int timeout = 100;
int cnt = 0;
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index 4ca9d84..1b921a3 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -36,12 +36,13 @@
#define CX18_DSP0_INTERRUPT_MASK 0xd0004C
static struct file_operations cx18_v4l2_enc_fops = {
- .owner = THIS_MODULE,
- .read = cx18_v4l2_read,
- .open = cx18_v4l2_open,
- .ioctl = cx18_v4l2_ioctl,
- .release = cx18_v4l2_close,
- .poll = cx18_v4l2_enc_poll,
+ .owner = THIS_MODULE,
+ .read = cx18_v4l2_read,
+ .open = cx18_v4l2_open,
+ .ioctl = cx18_v4l2_ioctl,
+ .compat_ioctl = v4l_compat_ioctl32,
+ .release = cx18_v4l2_close,
+ .poll = cx18_v4l2_enc_poll,
};
/* offset from 0 to register ts v4l2 minors on */
@@ -443,7 +444,7 @@
s->handle = data[0];
cx18_vapi(cx, CX18_CPU_SET_CHANNEL_TYPE, 2, s->handle, captype);
- if (atomic_read(&cx->capturing) == 0 && !ts) {
+ if (atomic_read(&cx->ana_capturing) == 0 && !ts) {
/* Stuff from Windows, we don't know what it is */
cx18_vapi(cx, CX18_CPU_SET_VER_CROP_LINE, 2, s->handle, 0);
cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 3, 1);
@@ -466,14 +467,14 @@
cx2341x_update(cx, cx18_api_func, NULL, &cx->params);
}
- if (atomic_read(&cx->capturing) == 0) {
+ if (atomic_read(&cx->tot_capturing) == 0) {
clear_bit(CX18_F_I_EOS, &cx->i_flags);
write_reg(7, CX18_DSP0_INTERRUPT_MASK);
}
cx18_vapi(cx, CX18_CPU_DE_SET_MDL_ACK, 3, s->handle,
- (void *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem,
- (void *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem);
+ (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem,
+ (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem);
list_for_each(p, &s->q_free.list) {
struct cx18_buffer *buf = list_entry(p, struct cx18_buffer, list);
@@ -481,8 +482,8 @@
writel(buf->dma_handle, &cx->scb->cpu_mdl[buf->id].paddr);
writel(s->buf_size, &cx->scb->cpu_mdl[buf->id].length);
cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
- (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, 1,
- buf->id, s->buf_size);
+ (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+ 1, buf->id, s->buf_size);
}
/* begin_capture */
if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) {
@@ -492,7 +493,9 @@
}
/* you're live! sit back and await interrupts :) */
- atomic_inc(&cx->capturing);
+ if (!ts)
+ atomic_inc(&cx->ana_capturing);
+ atomic_inc(&cx->tot_capturing);
return 0;
}
@@ -523,7 +526,7 @@
CX18_DEBUG_INFO("Stop Capture\n");
- if (atomic_read(&cx->capturing) == 0)
+ if (atomic_read(&cx->tot_capturing) == 0)
return 0;
if (s->type == CX18_ENC_STREAM_TYPE_MPG)
@@ -537,7 +540,9 @@
CX18_INFO("ignoring gop_end: not (yet?) supported by the firmware\n");
}
- atomic_dec(&cx->capturing);
+ if (s->type != CX18_ENC_STREAM_TYPE_TS)
+ atomic_dec(&cx->ana_capturing);
+ atomic_dec(&cx->tot_capturing);
/* Clear capture and no-read bits */
clear_bit(CX18_F_S_STREAMING, &s->s_flags);
@@ -545,7 +550,7 @@
cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle);
s->handle = 0xffffffff;
- if (atomic_read(&cx->capturing) > 0)
+ if (atomic_read(&cx->tot_capturing) > 0)
return 0;
write_reg(5, CX18_DSP0_INTERRUPT_MASK);
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index f24abcd..c4cc2f3 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -823,7 +823,7 @@
iounmap(dev->lmmio);
}
-static u32* cx23885_risc_field(u32 *rp, struct scatterlist *sglist,
+static __le32* cx23885_risc_field(__le32 *rp, struct scatterlist *sglist,
unsigned int offset, u32 sync_line,
unsigned int bpl, unsigned int padding,
unsigned int lines)
@@ -883,7 +883,7 @@
unsigned int padding, unsigned int lines)
{
u32 instructions, fields;
- u32 *rp;
+ __le32 *rp;
int rc;
fields = 0;
@@ -924,7 +924,7 @@
unsigned int lines)
{
u32 instructions;
- u32 *rp;
+ __le32 *rp;
int rc;
/* estimate risc mem: worst case is one write per page border +
@@ -951,7 +951,7 @@
int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
u32 reg, u32 mask, u32 value)
{
- u32 *rp;
+ __le32 *rp;
int rc;
if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0)
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 607efdc..1da6f13 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -433,7 +433,7 @@
int chroma = vid_input & 0xf00;
if ((vid_input & ~0xff0) ||
- luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA4 ||
+ luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA8 ||
chroma < CX25840_SVIDEO_CHROMA4 || chroma > CX25840_SVIDEO_CHROMA8) {
v4l_err(client, "0x%04x is not a valid video input!\n",
vid_input);
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index e976fc6..80c8883 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -332,6 +332,12 @@
struct snd_pcm_runtime *runtime = substream->runtime;
int err;
+ if (!chip) {
+ printk(KERN_ERR "BUG: cx88 can't find device struct."
+ " Can't proceed with open\n");
+ return -ENODEV;
+ }
+
err = snd_pcm_hw_constraint_pow2(runtime, 0, SNDRV_PCM_HW_PARAM_PERIODS);
if (err < 0)
goto _error;
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index aeba26d..fa6d398 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1493,10 +1493,16 @@
},
},
[CX88_BOARD_POWERCOLOR_REAL_ANGEL] = {
- .name = "PowerColor Real Angel 330",
+ .name = "PowerColor RA330", /* Long names may confuse LIRC. */
.tuner_type = TUNER_XC2028,
.tuner_addr = 0x61,
.input = { {
+ .type = CX88_VMUX_DEBUG,
+ .vmux = 3, /* Due to the way the cx88 driver is written, */
+ .gpio0 = 0x00ff, /* there is no way to deactivate audio pass- */
+ .gpio1 = 0xf39d, /* through without this entry. Furthermore, if */
+ .gpio3 = 0x0000, /* the TV mux entry is first, you get audio */
+ }, { /* from the tuner on boot for a little while. */
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x00ff,
@@ -2424,8 +2430,9 @@
switch (core->boardnr) {
case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
- /* Doesn't work with firmware version 2.7 */
- ctl->fname = "xc3028-v25.fw";
+ /* Now works with firmware version 2.7 */
+ if (core->i2c_algo.udelay < 16)
+ core->i2c_algo.udelay = 16;
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
ctl->scode_table = XC3028_FE_ZARLINK456;
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index c4d1aff..60eeda3 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -70,7 +70,7 @@
/* @lpi: lines per IRQ, or 0 to not generate irqs. Note: IRQ to be
generated _after_ lpi lines are transferred. */
-static u32* cx88_risc_field(u32 *rp, struct scatterlist *sglist,
+static __le32* cx88_risc_field(__le32 *rp, struct scatterlist *sglist,
unsigned int offset, u32 sync_line,
unsigned int bpl, unsigned int padding,
unsigned int lines, unsigned int lpi)
@@ -130,7 +130,7 @@
unsigned int bpl, unsigned int padding, unsigned int lines)
{
u32 instructions,fields;
- u32 *rp;
+ __le32 *rp;
int rc;
fields = 0;
@@ -168,7 +168,7 @@
unsigned int lines, unsigned int lpi)
{
u32 instructions;
- u32 *rp;
+ __le32 *rp;
int rc;
/* estimate risc mem: worst case is one write per page border +
@@ -193,7 +193,7 @@
int cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
u32 reg, u32 mask, u32 value)
{
- u32 *rp;
+ __le32 *rp;
int rc;
if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0)
diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c
index 92b2a6d..3c00610 100644
--- a/drivers/media/video/em28xx/em28xx-audio.c
+++ b/drivers/media/video/em28xx/em28xx-audio.c
@@ -268,6 +268,12 @@
dprintk("opening device and trying to acquire exclusive lock\n");
+ if (!dev) {
+ printk(KERN_ERR "BUG: em28xx can't find device struct."
+ " Can't proceed with open\n");
+ return -ENODEV;
+ }
+
/* Sets volume, mute, etc */
dev->mute = 0;
@@ -415,6 +421,12 @@
static int devnr;
int ret, err;
+ if (dev->has_audio_class) {
+ /* This device does not support the extension (in this case
+ the device is expecting the snd-usb-audio module */
+ return 0;
+ }
+
printk(KERN_INFO "em28xx-audio.c: probing for em28x1 "
"non standard usbaudio\n");
printk(KERN_INFO "em28xx-audio.c: Copyright (C) 2006 Markus "
@@ -458,6 +470,12 @@
if (dev == NULL)
return 0;
+ if (dev->has_audio_class) {
+ /* This device does not support the extension (in this case
+ the device is expecting the snd-usb-audio module */
+ return 0;
+ }
+
if (dev->adev) {
snd_card_free(dev->adev->sndcard);
kfree(dev->adev);
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 3e4f3c7..8cbda43 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -157,6 +157,7 @@
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_XC2028,
.mts_firmware = 1,
+ .has_dvb = 1,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
@@ -524,6 +525,9 @@
rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
if (rc > 0) {
switch (rc) {
+ case CHIP_ID_EM2860:
+ em28xx_info("chip ID is em2860\n");
+ break;
case CHIP_ID_EM2883:
em28xx_info("chip ID is em2882/em2883\n");
dev->wait_after_write = 0;
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 8cf4983..0b2333e 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -382,6 +382,11 @@
int result = 0;
struct em28xx_dvb *dvb;
+ if (!dev->has_dvb) {
+ /* This device does not support the extension */
+ return 0;
+ }
+
dvb = kzalloc(sizeof(struct em28xx_dvb), GFP_KERNEL);
if (dvb == NULL) {
@@ -444,6 +449,11 @@
static int dvb_fini(struct em28xx *dev)
{
+ if (!dev->has_dvb) {
+ /* This device does not support the extension */
+ return 0;
+ }
+
if (dev->dvb) {
unregister_dvb(dev->dvb);
dev->dvb = NULL;
diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h
index 9058bed..fac1ab2 100644
--- a/drivers/media/video/em28xx/em28xx-reg.h
+++ b/drivers/media/video/em28xx/em28xx-reg.h
@@ -84,5 +84,6 @@
/* FIXME: Need to be populated with the other chip ID's */
enum em28xx_chip_id {
+ CHIP_ID_EM2860 = 34,
CHIP_ID_EM2883 = 36,
};
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 8996175..285bc62 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1166,13 +1166,13 @@
reg->val = ret;
} else {
- u64 val = 0;
+ __le64 val = 0;
ret = em28xx_read_reg_req_len(dev, USB_REQ_GET_STATUS,
reg->reg, (char *)&val, 2);
if (ret < 0)
return ret;
- reg->val = cpu_to_le64((__u64)val);
+ reg->val = le64_to_cpu(val);
}
return 0;
@@ -1183,9 +1183,9 @@
{
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
- u64 buf;
+ __le64 buf;
- buf = le64_to_cpu((__u64)reg->val);
+ buf = cpu_to_le64(reg->val);
return em28xx_write_regs(dev, reg->reg, (char *)&buf,
em28xx_reg_len(reg->reg));
@@ -1848,32 +1848,28 @@
int em28xx_register_extension(struct em28xx_ops *ops)
{
- struct em28xx *h, *dev = NULL;
-
- list_for_each_entry(h, &em28xx_devlist, devlist)
- dev = h;
+ struct em28xx *dev = NULL;
mutex_lock(&em28xx_extension_devlist_lock);
list_add_tail(&ops->next, &em28xx_extension_devlist);
- if (dev)
- ops->init(dev);
-
+ list_for_each_entry(dev, &em28xx_devlist, devlist) {
+ if (dev)
+ ops->init(dev);
+ }
printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
mutex_unlock(&em28xx_extension_devlist_lock);
-
return 0;
}
EXPORT_SYMBOL(em28xx_register_extension);
void em28xx_unregister_extension(struct em28xx_ops *ops)
{
- struct em28xx *h, *dev = NULL;
+ struct em28xx *dev = NULL;
- list_for_each_entry(h, &em28xx_devlist, devlist)
- dev = h;
-
- if (dev)
- ops->fini(dev);
+ list_for_each_entry(dev, &em28xx_devlist, devlist) {
+ if (dev)
+ ops->fini(dev);
+ }
mutex_lock(&em28xx_extension_devlist_lock);
printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index ba06e81..9d23b1e 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -259,6 +259,12 @@
/* Scatter-Gather array element, used in DMA transfers */
struct ivtv_sg_element {
+ __le32 src;
+ __le32 dst;
+ __le32 size;
+};
+
+struct ivtv_sg_host_element {
u32 src;
u32 dst;
u32 size;
@@ -349,8 +355,8 @@
u16 dma_xfer_cnt;
/* Base Dev SG Array for cx23415/6 */
- struct ivtv_sg_element *sg_pending;
- struct ivtv_sg_element *sg_processing;
+ struct ivtv_sg_host_element *sg_pending;
+ struct ivtv_sg_host_element *sg_processing;
struct ivtv_sg_element *sg_dma;
dma_addr_t sg_handle;
int sg_pending_size;
diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c
index f2fa434..db813e0 100644
--- a/drivers/media/video/ivtv/ivtv-fileops.c
+++ b/drivers/media/video/ivtv/ivtv-fileops.c
@@ -587,7 +587,7 @@
since we may get here before the stream has been fully set-up */
if (mode == OUT_YUV && s->q_full.length == 0 && itv->dma_data_req_size) {
while (count >= itv->dma_data_req_size) {
- if (!ivtv_yuv_udma_stream_frame (itv, (void *)user_buf)) {
+ if (!ivtv_yuv_udma_stream_frame (itv, (void __user *)user_buf)) {
bytes_written += itv->dma_data_req_size;
user_buf += itv->dma_data_req_size;
count -= itv->dma_data_req_size;
diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c
index d8ba3a4..fba150a 100644
--- a/drivers/media/video/ivtv/ivtv-irq.c
+++ b/drivers/media/video/ivtv/ivtv-irq.c
@@ -231,14 +231,14 @@
struct ivtv_buffer *buf = NULL;
struct list_head *p;
u32 offset;
- u32 *u32buf;
+ __le32 *u32buf;
int x = 0;
IVTV_DEBUG_HI_DMA("%s %s completed (%x)\n", ivtv_use_pio(s) ? "PIO" : "DMA",
s->name, s->dma_offset);
list_for_each(p, &s->q_dma.list) {
buf = list_entry(p, struct ivtv_buffer, list);
- u32buf = (u32 *)buf->buf;
+ u32buf = (__le32 *)buf->buf;
/* Sync Buffer */
ivtv_buf_sync_for_cpu(s, buf);
@@ -444,7 +444,7 @@
}
s->dma_xfer_cnt++;
- memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size);
+ memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size);
s->sg_processing_size = s->sg_pending_size;
s->sg_pending_size = 0;
s->sg_processed = 0;
@@ -473,7 +473,7 @@
if (s->q_predma.bytesused)
ivtv_queue_move(s, &s->q_predma, NULL, &s->q_dma, s->q_predma.bytesused);
s->dma_xfer_cnt++;
- memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size);
+ memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size);
s->sg_processing_size = s->sg_pending_size;
s->sg_pending_size = 0;
s->sg_processed = 0;
diff --git a/drivers/media/video/ivtv/ivtv-queue.c b/drivers/media/video/ivtv/ivtv-queue.c
index fc8b1ea..71bd13e 100644
--- a/drivers/media/video/ivtv/ivtv-queue.c
+++ b/drivers/media/video/ivtv/ivtv-queue.c
@@ -193,7 +193,7 @@
int ivtv_stream_alloc(struct ivtv_stream *s)
{
struct ivtv *itv = s->itv;
- int SGsize = sizeof(struct ivtv_sg_element) * s->buffers;
+ int SGsize = sizeof(struct ivtv_sg_host_element) * s->buffers;
int i;
if (s->buffers == 0)
diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c
index c47c2b9..c854285 100644
--- a/drivers/media/video/ivtv/ivtv-streams.c
+++ b/drivers/media/video/ivtv/ivtv-streams.c
@@ -44,23 +44,25 @@
#include "ivtv-streams.h"
static const struct file_operations ivtv_v4l2_enc_fops = {
- .owner = THIS_MODULE,
- .read = ivtv_v4l2_read,
- .write = ivtv_v4l2_write,
- .open = ivtv_v4l2_open,
- .ioctl = ivtv_v4l2_ioctl,
- .release = ivtv_v4l2_close,
- .poll = ivtv_v4l2_enc_poll,
+ .owner = THIS_MODULE,
+ .read = ivtv_v4l2_read,
+ .write = ivtv_v4l2_write,
+ .open = ivtv_v4l2_open,
+ .ioctl = ivtv_v4l2_ioctl,
+ .compat_ioctl = v4l_compat_ioctl32,
+ .release = ivtv_v4l2_close,
+ .poll = ivtv_v4l2_enc_poll,
};
static const struct file_operations ivtv_v4l2_dec_fops = {
- .owner = THIS_MODULE,
- .read = ivtv_v4l2_read,
- .write = ivtv_v4l2_write,
- .open = ivtv_v4l2_open,
- .ioctl = ivtv_v4l2_ioctl,
- .release = ivtv_v4l2_close,
- .poll = ivtv_v4l2_dec_poll,
+ .owner = THIS_MODULE,
+ .read = ivtv_v4l2_read,
+ .write = ivtv_v4l2_write,
+ .open = ivtv_v4l2_open,
+ .ioctl = ivtv_v4l2_ioctl,
+ .compat_ioctl = v4l_compat_ioctl32,
+ .release = ivtv_v4l2_close,
+ .poll = ivtv_v4l2_dec_poll,
};
#define IVTV_V4L2_DEC_MPG_OFFSET 16 /* offset from 0 to register decoder mpg v4l2 minors on */
diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/video/ivtv/ivtv-version.h
index 02c5ab0..442f43f 100644
--- a/drivers/media/video/ivtv/ivtv-version.h
+++ b/drivers/media/video/ivtv/ivtv-version.h
@@ -22,8 +22,8 @@
#define IVTV_DRIVER_NAME "ivtv"
#define IVTV_DRIVER_VERSION_MAJOR 1
-#define IVTV_DRIVER_VERSION_MINOR 2
-#define IVTV_DRIVER_VERSION_PATCHLEVEL 1
+#define IVTV_DRIVER_VERSION_MINOR 3
+#define IVTV_DRIVER_VERSION_PATCHLEVEL 0
#define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL)
#define IVTV_DRIVER_VERSION KERNEL_VERSION(IVTV_DRIVER_VERSION_MAJOR,IVTV_DRIVER_VERSION_MINOR,IVTV_DRIVER_VERSION_PATCHLEVEL)
diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c
index a9417f6..3092ff1 100644
--- a/drivers/media/video/ivtv/ivtv-yuv.c
+++ b/drivers/media/video/ivtv/ivtv-yuv.c
@@ -1116,7 +1116,7 @@
}
/* Attempt to dma a frame from a user buffer */
-int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src)
+int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src)
{
struct yuv_playback_info *yi = &itv->yuv_info;
struct ivtv_dma_frame dma_args;
diff --git a/drivers/media/video/ivtv/ivtv-yuv.h b/drivers/media/video/ivtv/ivtv-yuv.h
index 2fe5f12..ca5173f 100644
--- a/drivers/media/video/ivtv/ivtv-yuv.h
+++ b/drivers/media/video/ivtv/ivtv-yuv.h
@@ -35,7 +35,7 @@
int ivtv_yuv_filter_check(struct ivtv *itv);
void ivtv_yuv_setup_stream_frame(struct ivtv *itv);
-int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src);
+int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src);
void ivtv_yuv_frame_complete(struct ivtv *itv);
int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args);
void ivtv_yuv_close(struct ivtv *itv);
diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c
index 2bc6bdc..d7bfd30 100644
--- a/drivers/media/video/ov7670.c
+++ b/drivers/media/video/ov7670.c
@@ -406,8 +406,10 @@
int ret;
ret = i2c_smbus_read_byte_data(c, reg);
- if (ret >= 0)
+ if (ret >= 0) {
*value = (unsigned char) ret;
+ ret = 0;
+ }
return ret;
}
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 7cc8e9b..5ec5bb9 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -1019,12 +1019,12 @@
struct pxa_camera_dev *pcdev;
struct resource *res;
void __iomem *base;
- unsigned int irq;
+ int irq;
int err = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
- if (!res || !irq) {
+ if (!res || irq < 0) {
err = -ENODEV;
goto exit;
}
diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c
index ba30824..f118de6 100644
--- a/drivers/media/video/saa7134/saa7134-alsa.c
+++ b/drivers/media/video/saa7134/saa7134-alsa.c
@@ -613,9 +613,15 @@
struct snd_pcm_runtime *runtime = substream->runtime;
snd_card_saa7134_pcm_t *pcm;
snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream);
- struct saa7134_dev *dev = saa7134->dev;
+ struct saa7134_dev *dev;
int amux, err;
+ if (!saa7134) {
+ printk(KERN_ERR "BUG: saa7134 can't find device struct."
+ " Can't proceed with open\n");
+ return -ENODEV;
+ }
+ dev = saa7134->dev;
mutex_lock(&dev->dmasound.lock);
dev->dmasound.read_count = 0;
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index b111903..2618cfa 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -4114,11 +4114,7 @@
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
- /*
- TODO:
.mpeg = SAA7134_MPEG_DVB,
- */
-
.inputs = {{
.name = name_tv,
.vmux = 1,
@@ -4157,7 +4153,7 @@
} },
.radio = {
.name = name_radio,
- .amux = LINE1,
+ .amux = TV,
},
},
[SAA7134_BOARD_AVERMEDIA_M115] = {
@@ -4167,6 +4163,7 @@
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
.vmux = 1,
@@ -5351,22 +5348,21 @@
{
switch (command) {
case XC2028_TUNER_RESET:
- saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0x06e20000);
- saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0x06a20000);
- mdelay(250);
- saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0);
- saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0);
- mdelay(250);
- saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0x06e20000);
- saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0x06a20000);
- mdelay(250);
- saa_andorl(SAA7133_ANALOG_IO_SELECT >> 2, 0x02, 0x02);
- saa_andorl(SAA7134_ANALOG_IN_CTRL1 >> 2, 0x81, 0x81);
- saa_andorl(SAA7134_AUDIO_CLOCK0 >> 2, 0x03187de7, 0x03187de7);
- saa_andorl(SAA7134_AUDIO_PLL_CTRL >> 2, 0x03, 0x03);
- saa_andorl(SAA7134_AUDIO_CLOCKS_PER_FIELD0 >> 2,
- 0x0001e000, 0x0001e000);
- return 0;
+ saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00000000);
+ saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000);
+ switch (dev->board) {
+ case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+ saa7134_set_gpio(dev, 23, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 23, 1);
+ break;
+ case SAA7134_BOARD_AVERMEDIA_A16D:
+ saa7134_set_gpio(dev, 21, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 21, 1);
+ break;
+ }
+ return 0;
}
return -EINVAL;
}
@@ -5553,9 +5549,7 @@
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08000000, 0x00000000);
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS:
- case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
case SAA7134_BOARD_AVERMEDIA_M115:
- case SAA7134_BOARD_AVERMEDIA_A16D:
/* power-down tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0);
@@ -5565,6 +5559,18 @@
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff);
msleep(10);
break;
+ case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+ saa7134_set_gpio(dev, 23, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 23, 1);
+ break;
+ case SAA7134_BOARD_AVERMEDIA_A16D:
+ saa7134_set_gpio(dev, 21, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 21, 1);
+ msleep(1);
+ dev->has_remote = SAA7134_REMOTE_GPIO;
+ break;
case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM:
/* power-down tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x000A8004, 0x000A8004);
@@ -5615,7 +5621,8 @@
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x80040100, 0x80040100);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x80040100, 0x00040100);
printk("%s: %s: hybrid analog/dvb card\n"
- "%s: Sorry, only the analog inputs are supported for now.\n",
+ "%s: Sorry, only analog s-video and composite input "
+ "are supported for now.\n",
dev->name, card(dev).name, dev->name);
break;
}
@@ -5675,6 +5682,7 @@
switch (dev->board) {
case SAA7134_BOARD_AVERMEDIA_A16D:
+ case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
ctl.demod = XC3028_FE_ZARLINK456;
break;
default:
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 469f93a..341b101 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -153,12 +153,12 @@
return 0;
}
-static int mt352_aver_a16d_init(struct dvb_frontend *fe)
+static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe)
{
- static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
- static u8 reset [] = { RESET, 0x80 };
- static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
- static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
+ static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
+ static u8 reset [] = { RESET, 0x80 };
+ static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
+ static u8 agc_cfg [] = { AGC_TARGET, 0xe };
static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
mt352_write(fe, clock_config, sizeof(clock_config));
@@ -167,12 +167,9 @@
mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
mt352_write(fe, agc_cfg, sizeof(agc_cfg));
mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
-
return 0;
}
-
-
static int mt352_pinnacle_tuner_set_params(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
{
@@ -215,14 +212,10 @@
.demod_init = mt352_aver777_init,
};
-static struct mt352_config avermedia_16d = {
- .demod_address = 0xf,
- .demod_init = mt352_aver_a16d_init,
-};
-
-static struct mt352_config avermedia_e506r_mt352_dev = {
+static struct mt352_config avermedia_xc3028_mt352_dev = {
.demod_address = (0x1e >> 1),
.no_tuner = 1,
+ .demod_init = mt352_avermedia_xc3028_init,
};
/* ==================================================================
@@ -975,9 +968,10 @@
}
break;
case SAA7134_BOARD_AVERMEDIA_A16D:
- dprintk("avertv A16D dvb setup\n");
- dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_16d,
- &dev->i2c_adap);
+ dprintk("AverMedia A16D dvb setup\n");
+ dev->dvb.frontend = dvb_attach(mt352_attach,
+ &avermedia_xc3028_mt352_dev,
+ &dev->i2c_adap);
attach_xc3028 = 1;
break;
case SAA7134_BOARD_MD7134:
@@ -1091,7 +1085,8 @@
ads_tech_duo_config.tuner_address);
goto dettach_frontend;
}
- }
+ } else
+ wprintk("failed to attach tda10046\n");
break;
case SAA7134_BOARD_TEVION_DVBT_220RF:
if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config,
@@ -1260,11 +1255,14 @@
goto dettach_frontend;
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+ dprintk("AverMedia E506R dvb setup\n");
+ saa7134_set_gpio(dev, 25, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 25, 1);
dev->dvb.frontend = dvb_attach(mt352_attach,
- &avermedia_e506r_mt352_dev,
- &dev->i2c_adap);
+ &avermedia_xc3028_mt352_dev,
+ &dev->i2c_adap);
attach_xc3028 = 1;
- break;
case SAA7134_BOARD_MD7134_BRIDGE_2:
dev->dvb.frontend = dvb_attach(tda10086_attach,
&sd1878_4m, &dev->i2c_adap);
@@ -1338,7 +1336,8 @@
return ret;
dettach_frontend:
- dvb_frontend_detach(dev->dvb.frontend);
+ if (dev->dvb.frontend)
+ dvb_frontend_detach(dev->dvb.frontend);
dev->dvb.frontend = NULL;
return -1;
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index 1314522..3ae71a3 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -110,9 +110,10 @@
{
struct saa7134_dev *dev = file->private_data;
+ mutex_lock(&dev->empress_tsq.vb_lock);
+
videobuf_stop(&dev->empress_tsq);
videobuf_mmap_free(&dev->empress_tsq);
- dev->empress_users--;
/* stop the encoder */
ts_reset_encoder(dev);
@@ -121,6 +122,10 @@
saa_writeb(SAA7134_AUDIO_MUTE_CTRL,
saa_readb(SAA7134_AUDIO_MUTE_CTRL) | (1 << 6));
+ dev->empress_users--;
+
+ mutex_unlock(&dev->empress_tsq.vb_lock);
+
return 0;
}
@@ -163,8 +168,7 @@
static int empress_querycap(struct file *file, void *priv,
struct v4l2_capability *cap)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
strcpy(cap->driver, "saa7134");
strlcpy(cap->card, saa7134_boards[dev->board].name,
@@ -219,8 +223,7 @@
static int empress_g_fmt_cap(struct file *file, void *priv,
struct v4l2_format *f)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
saa7134_i2c_call_clients(dev, VIDIOC_G_FMT, f);
@@ -233,8 +236,7 @@
static int empress_s_fmt_cap(struct file *file, void *priv,
struct v4l2_format *f)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
saa7134_i2c_call_clients(dev, VIDIOC_S_FMT, f);
@@ -248,8 +250,7 @@
static int empress_reqbufs(struct file *file, void *priv,
struct v4l2_requestbuffers *p)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_reqbufs(&dev->empress_tsq, p);
}
@@ -257,24 +258,21 @@
static int empress_querybuf(struct file *file, void *priv,
struct v4l2_buffer *b)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_querybuf(&dev->empress_tsq, b);
}
static int empress_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_qbuf(&dev->empress_tsq, b);
}
static int empress_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_dqbuf(&dev->empress_tsq, b,
file->f_flags & O_NONBLOCK);
@@ -283,8 +281,7 @@
static int empress_streamon(struct file *file, void *priv,
enum v4l2_buf_type type)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_streamon(&dev->empress_tsq);
}
@@ -292,8 +289,7 @@
static int empress_streamoff(struct file *file, void *priv,
enum v4l2_buf_type type)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_streamoff(&dev->empress_tsq);
}
@@ -301,8 +297,7 @@
static int empress_s_ext_ctrls(struct file *file, void *priv,
struct v4l2_ext_controls *ctrls)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
/* count == 0 is abused in saa6752hs.c, so that special
case is handled here explicitly. */
@@ -321,8 +316,7 @@
static int empress_g_ext_ctrls(struct file *file, void *priv,
struct v4l2_ext_controls *ctrls)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG)
return -EINVAL;
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 919632b..76e6501 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -323,6 +323,15 @@
saa_setb(SAA7134_GPIO_GPMODE1, 0x1);
saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1);
break;
+ case SAA7134_BOARD_AVERMEDIA_A16D:
+ ir_codes = ir_codes_avermedia_a16d;
+ mask_keycode = 0x02F200;
+ mask_keydown = 0x000400;
+ polling = 50; /* ms */
+ /* Without this we won't receive key up events */
+ saa_setb(SAA7134_GPIO_GPMODE1, 0x1);
+ saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1);
+ break;
case SAA7134_BOARD_KWORLD_TERMINATOR:
ir_codes = ir_codes_pixelview;
mask_keycode = 0x00001f;
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index a1b9244..d015bfe 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -763,15 +763,6 @@
.owner = THIS_MODULE,
};
-/*
- * Image capture host - this is a host device, not a bus device, so,
- * no bus reference, no probing.
- */
-static struct class soc_camera_host_class = {
- .owner = THIS_MODULE,
- .name = "camera_host",
-};
-
static void dummy_release(struct device *dev)
{
}
@@ -801,7 +792,6 @@
/* Number might be equal to the platform device ID */
sprintf(ici->dev.bus_id, "camera_host%d", ici->nr);
- ici->dev.class = &soc_camera_host_class;
mutex_lock(&list_lock);
list_for_each_entry(ix, &hosts, list) {
@@ -1003,14 +993,9 @@
ret = driver_register(&ic_drv);
if (ret)
goto edrvr;
- ret = class_register(&soc_camera_host_class);
- if (ret)
- goto eclr;
return 0;
-eclr:
- driver_unregister(&ic_drv);
edrvr:
bus_unregister(&soc_camera_bus_type);
return ret;
@@ -1018,7 +1003,6 @@
static void __exit soc_camera_exit(void)
{
- class_unregister(&soc_camera_host_class);
driver_unregister(&ic_drv);
bus_unregister(&soc_camera_bus_type);
}
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index a0f7bc1..0d12ace 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -536,7 +536,7 @@
static inline int check_mode(struct tuner *t, char *cmd)
{
if ((1 << t->mode & t->mode_mask) == 0) {
- return EINVAL;
+ return -EINVAL;
}
switch (t->mode) {
@@ -730,11 +730,11 @@
t->mode = mode;
- if (check_mode(t, cmd) == EINVAL) {
+ if (check_mode(t, cmd) == -EINVAL) {
t->mode = T_STANDBY;
if (analog_ops->standby)
analog_ops->standby(&t->fe);
- return EINVAL;
+ return -EINVAL;
}
return 0;
}
@@ -776,13 +776,13 @@
break;
case AUDC_SET_RADIO:
if (set_mode(client, t, V4L2_TUNER_RADIO, "AUDC_SET_RADIO")
- == EINVAL)
+ == -EINVAL)
return 0;
if (t->radio_freq)
set_freq(client, t->radio_freq);
break;
case TUNER_SET_STANDBY:
- if (check_mode(t, "TUNER_SET_STANDBY") == EINVAL)
+ if (check_mode(t, "TUNER_SET_STANDBY") == -EINVAL)
return 0;
t->mode = T_STANDBY;
if (analog_ops->standby)
@@ -790,9 +790,9 @@
break;
#ifdef CONFIG_VIDEO_ALLOW_V4L1
case VIDIOCSAUDIO:
- if (check_mode(t, "VIDIOCSAUDIO") == EINVAL)
+ if (check_mode(t, "VIDIOCSAUDIO") == -EINVAL)
return 0;
- if (check_v4l2(t) == EINVAL)
+ if (check_v4l2(t) == -EINVAL)
return 0;
/* Should be implemented, since bttv calls it */
@@ -810,10 +810,10 @@
};
struct video_channel *vc = arg;
- if (check_v4l2(t) == EINVAL)
+ if (check_v4l2(t) == -EINVAL)
return 0;
- if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==EINVAL)
+ if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==-EINVAL)
return 0;
if (vc->norm < ARRAY_SIZE(map))
@@ -827,9 +827,9 @@
{
unsigned long *v = arg;
- if (check_mode(t, "VIDIOCSFREQ") == EINVAL)
+ if (check_mode(t, "VIDIOCSFREQ") == -EINVAL)
return 0;
- if (check_v4l2(t) == EINVAL)
+ if (check_v4l2(t) == -EINVAL)
return 0;
set_freq(client, *v);
@@ -839,9 +839,9 @@
{
struct video_tuner *vt = arg;
- if (check_mode(t, "VIDIOCGTUNER") == EINVAL)
+ if (check_mode(t, "VIDIOCGTUNER") == -EINVAL)
return 0;
- if (check_v4l2(t) == EINVAL)
+ if (check_v4l2(t) == -EINVAL)
return 0;
if (V4L2_TUNER_RADIO == t->mode) {
@@ -883,9 +883,9 @@
{
struct video_audio *va = arg;
- if (check_mode(t, "VIDIOCGAUDIO") == EINVAL)
+ if (check_mode(t, "VIDIOCGAUDIO") == -EINVAL)
return 0;
- if (check_v4l2(t) == EINVAL)
+ if (check_v4l2(t) == -EINVAL)
return 0;
if (V4L2_TUNER_RADIO == t->mode) {
@@ -925,7 +925,7 @@
v4l2_std_id *id = arg;
if (set_mode (client, t, V4L2_TUNER_ANALOG_TV, "VIDIOC_S_STD")
- == EINVAL)
+ == -EINVAL)
return 0;
switch_v4l2();
@@ -941,7 +941,7 @@
struct v4l2_frequency *f = arg;
if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY")
- == EINVAL)
+ == -EINVAL)
return 0;
switch_v4l2();
set_freq(client,f->frequency);
@@ -952,7 +952,7 @@
{
struct v4l2_frequency *f = arg;
- if (check_mode(t, "VIDIOC_G_FREQUENCY") == EINVAL)
+ if (check_mode(t, "VIDIOC_G_FREQUENCY") == -EINVAL)
return 0;
switch_v4l2();
f->type = t->mode;
@@ -973,7 +973,7 @@
{
struct v4l2_tuner *tuner = arg;
- if (check_mode(t, "VIDIOC_G_TUNER") == EINVAL)
+ if (check_mode(t, "VIDIOC_G_TUNER") == -EINVAL)
return 0;
switch_v4l2();
@@ -1020,7 +1020,7 @@
{
struct v4l2_tuner *tuner = arg;
- if (check_mode(t, "VIDIOC_S_TUNER") == EINVAL)
+ if (check_mode(t, "VIDIOC_S_TUNER") == -EINVAL)
return 0;
switch_v4l2();
diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c
index 32e536e..3d26a30 100644
--- a/drivers/media/video/usbvideo/quickcam_messenger.c
+++ b/drivers/media/video/usbvideo/quickcam_messenger.c
@@ -210,7 +210,7 @@
return ret;
}
-static int qcm_stv_setw(struct usb_device *dev, u16 reg, u16 val)
+static int qcm_stv_setw(struct usb_device *dev, u16 reg, __le16 val)
{
int ret;
diff --git a/drivers/media/video/uvc/Makefile b/drivers/media/video/uvc/Makefile
new file mode 100644
index 0000000..968c199
--- /dev/null
+++ b/drivers/media/video/uvc/Makefile
@@ -0,0 +1,3 @@
+uvcvideo-objs := uvc_driver.o uvc_queue.o uvc_v4l2.o uvc_video.o uvc_ctrl.o \
+ uvc_status.o uvc_isight.o
+obj-$(CONFIG_USB_VIDEO_CLASS) += uvcvideo.o
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
new file mode 100644
index 0000000..f0ee46d
--- /dev/null
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -0,0 +1,1256 @@
+/*
+ * uvc_ctrl.c -- USB Video Class driver - Controls
+ *
+ * Copyright (C) 2005-2008
+ * Laurent Pinchart (laurent.pinchart@skynet.be)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+#include <asm/atomic.h>
+
+#include "uvcvideo.h"
+
+#define UVC_CTRL_NDATA 2
+#define UVC_CTRL_DATA_CURRENT 0
+#define UVC_CTRL_DATA_BACKUP 1
+
+/* ------------------------------------------------------------------------
+ * Control, formats, ...
+ */
+
+static struct uvc_control_info uvc_ctrls[] = {
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_BRIGHTNESS_CONTROL,
+ .index = 0,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_CONTRAST_CONTROL,
+ .index = 1,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_HUE_CONTROL,
+ .index = 2,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_SATURATION_CONTROL,
+ .index = 3,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_SHARPNESS_CONTROL,
+ .index = 4,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_GAMMA_CONTROL,
+ .index = 5,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_BACKLIGHT_COMPENSATION_CONTROL,
+ .index = 8,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_GAIN_CONTROL,
+ .index = 9,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_POWER_LINE_FREQUENCY_CONTROL,
+ .index = 10,
+ .size = 1,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_HUE_AUTO_CONTROL,
+ .index = 11,
+ .size = 1,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR
+ | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_AE_MODE_CONTROL,
+ .index = 1,
+ .size = 1,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR
+ | UVC_CONTROL_GET_DEF | UVC_CONTROL_GET_RES
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_AE_PRIORITY_CONTROL,
+ .index = 2,
+ .size = 1,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_EXPOSURE_TIME_ABSOLUTE_CONTROL,
+ .index = 3,
+ .size = 4,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_FOCUS_ABSOLUTE_CONTROL,
+ .index = 5,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE,
+ },
+ {
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_FOCUS_AUTO_CONTROL,
+ .index = 17,
+ .size = 1,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR
+ | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL,
+ .index = 12,
+ .size = 1,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR
+ | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL,
+ .index = 6,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL,
+ .index = 13,
+ .size = 1,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR
+ | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL,
+ .index = 7,
+ .size = 4,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE,
+ },
+};
+
+static struct uvc_menu_info power_line_frequency_controls[] = {
+ { 0, "Disabled" },
+ { 1, "50 Hz" },
+ { 2, "60 Hz" },
+};
+
+static struct uvc_menu_info exposure_auto_controls[] = {
+ { 1, "Manual Mode" },
+ { 2, "Auto Mode" },
+ { 4, "Shutter Priority Mode" },
+ { 8, "Aperture Priority Mode" },
+};
+
+static struct uvc_control_mapping uvc_ctrl_mappings[] = {
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .name = "Brightness",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_BRIGHTNESS_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_SIGNED,
+ },
+ {
+ .id = V4L2_CID_CONTRAST,
+ .name = "Contrast",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_CONTRAST_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_HUE,
+ .name = "Hue",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_HUE_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_SIGNED,
+ },
+ {
+ .id = V4L2_CID_SATURATION,
+ .name = "Saturation",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_SATURATION_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_SHARPNESS,
+ .name = "Sharpness",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_SHARPNESS_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_GAMMA,
+ .name = "Gamma",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_GAMMA_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_BACKLIGHT_COMPENSATION,
+ .name = "Backlight Compensation",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_BACKLIGHT_COMPENSATION_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_GAIN,
+ .name = "Gain",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_GAIN_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_POWER_LINE_FREQUENCY,
+ .name = "Power Line Frequency",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_POWER_LINE_FREQUENCY_CONTROL,
+ .size = 2,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_MENU,
+ .data_type = UVC_CTRL_DATA_TYPE_ENUM,
+ .menu_info = power_line_frequency_controls,
+ .menu_count = ARRAY_SIZE(power_line_frequency_controls),
+ },
+ {
+ .id = V4L2_CID_HUE_AUTO,
+ .name = "Hue, Auto",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_HUE_AUTO_CONTROL,
+ .size = 1,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN,
+ .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN,
+ },
+ {
+ .id = V4L2_CID_EXPOSURE_AUTO,
+ .name = "Exposure, Auto",
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_AE_MODE_CONTROL,
+ .size = 4,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_MENU,
+ .data_type = UVC_CTRL_DATA_TYPE_BITMASK,
+ .menu_info = exposure_auto_controls,
+ .menu_count = ARRAY_SIZE(exposure_auto_controls),
+ },
+ {
+ .id = V4L2_CID_EXPOSURE_AUTO_PRIORITY,
+ .name = "Exposure, Auto Priority",
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_AE_PRIORITY_CONTROL,
+ .size = 1,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN,
+ .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN,
+ },
+ {
+ .id = V4L2_CID_EXPOSURE_ABSOLUTE,
+ .name = "Exposure (Absolute)",
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_EXPOSURE_TIME_ABSOLUTE_CONTROL,
+ .size = 32,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_AUTO_WHITE_BALANCE,
+ .name = "White Balance Temperature, Auto",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL,
+ .size = 1,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN,
+ .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN,
+ },
+ {
+ .id = V4L2_CID_WHITE_BALANCE_TEMPERATURE,
+ .name = "White Balance Temperature",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_AUTO_WHITE_BALANCE,
+ .name = "White Balance Component, Auto",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL,
+ .size = 1,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN,
+ .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN,
+ },
+ {
+ .id = V4L2_CID_BLUE_BALANCE,
+ .name = "White Balance Blue Component",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_SIGNED,
+ },
+ {
+ .id = V4L2_CID_RED_BALANCE,
+ .name = "White Balance Red Component",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL,
+ .size = 16,
+ .offset = 16,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_SIGNED,
+ },
+ {
+ .id = V4L2_CID_FOCUS_ABSOLUTE,
+ .name = "Focus (absolute)",
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_FOCUS_ABSOLUTE_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_FOCUS_AUTO,
+ .name = "Focus, Auto",
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_FOCUS_AUTO_CONTROL,
+ .size = 1,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN,
+ .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN,
+ },
+};
+
+/* ------------------------------------------------------------------------
+ * Utility functions
+ */
+
+static inline __u8 *uvc_ctrl_data(struct uvc_control *ctrl, int id)
+{
+ return ctrl->data + id * ctrl->info->size;
+}
+
+static inline int uvc_get_bit(const __u8 *data, int bit)
+{
+ return (data[bit >> 3] >> (bit & 7)) & 1;
+}
+
+/* Extract the bit string specified by mapping->offset and mapping->size
+ * from the little-endian data stored at 'data' and return the result as
+ * a signed 32bit integer. Sign extension will be performed if the mapping
+ * references a signed data type.
+ */
+static __s32 uvc_get_le_value(const __u8 *data,
+ struct uvc_control_mapping *mapping)
+{
+ int bits = mapping->size;
+ int offset = mapping->offset;
+ __s32 value = 0;
+ __u8 mask;
+
+ data += offset / 8;
+ offset &= 7;
+ mask = ((1LL << bits) - 1) << offset;
+
+ for (; bits > 0; data++) {
+ __u8 byte = *data & mask;
+ value |= offset > 0 ? (byte >> offset) : (byte << (-offset));
+ bits -= 8 - (offset > 0 ? offset : 0);
+ offset -= 8;
+ mask = (1 << bits) - 1;
+ }
+
+ /* Sign-extend the value if needed */
+ if (mapping->data_type == UVC_CTRL_DATA_TYPE_SIGNED)
+ value |= -(value & (1 << (mapping->size - 1)));
+
+ return value;
+}
+
+/* Set the bit string specified by mapping->offset and mapping->size
+ * in the little-endian data stored at 'data' to the value 'value'.
+ */
+static void uvc_set_le_value(__s32 value, __u8 *data,
+ struct uvc_control_mapping *mapping)
+{
+ int bits = mapping->size;
+ int offset = mapping->offset;
+ __u8 mask;
+
+ data += offset / 8;
+ offset &= 7;
+
+ for (; bits > 0; data++) {
+ mask = ((1LL << bits) - 1) << offset;
+ *data = (*data & ~mask) | ((value << offset) & mask);
+ value >>= offset ? offset : 8;
+ bits -= 8 - offset;
+ offset = 0;
+ }
+}
+
+/* ------------------------------------------------------------------------
+ * Terminal and unit management
+ */
+
+static const __u8 uvc_processing_guid[16] = UVC_GUID_UVC_PROCESSING;
+static const __u8 uvc_camera_guid[16] = UVC_GUID_UVC_CAMERA;
+static const __u8 uvc_media_transport_input_guid[16] =
+ UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT;
+
+static int uvc_entity_match_guid(struct uvc_entity *entity, __u8 guid[16])
+{
+ switch (UVC_ENTITY_TYPE(entity)) {
+ case ITT_CAMERA:
+ return memcmp(uvc_camera_guid, guid, 16) == 0;
+
+ case ITT_MEDIA_TRANSPORT_INPUT:
+ return memcmp(uvc_media_transport_input_guid, guid, 16) == 0;
+
+ case VC_PROCESSING_UNIT:
+ return memcmp(uvc_processing_guid, guid, 16) == 0;
+
+ case VC_EXTENSION_UNIT:
+ return memcmp(entity->extension.guidExtensionCode,
+ guid, 16) == 0;
+
+ default:
+ return 0;
+ }
+}
+
+/* ------------------------------------------------------------------------
+ * UVC Controls
+ */
+
+static void __uvc_find_control(struct uvc_entity *entity, __u32 v4l2_id,
+ struct uvc_control_mapping **mapping, struct uvc_control **control,
+ int next)
+{
+ struct uvc_control *ctrl;
+ struct uvc_control_mapping *map;
+ unsigned int i;
+
+ if (entity == NULL)
+ return;
+
+ for (i = 0; i < entity->ncontrols; ++i) {
+ ctrl = &entity->controls[i];
+ if (ctrl->info == NULL)
+ continue;
+
+ list_for_each_entry(map, &ctrl->info->mappings, list) {
+ if ((map->id == v4l2_id) && !next) {
+ *control = ctrl;
+ *mapping = map;
+ return;
+ }
+
+ if ((*mapping == NULL || (*mapping)->id > map->id) &&
+ (map->id > v4l2_id) && next) {
+ *control = ctrl;
+ *mapping = map;
+ }
+ }
+ }
+}
+
+struct uvc_control *uvc_find_control(struct uvc_video_device *video,
+ __u32 v4l2_id, struct uvc_control_mapping **mapping)
+{
+ struct uvc_control *ctrl = NULL;
+ struct uvc_entity *entity;
+ int next = v4l2_id & V4L2_CTRL_FLAG_NEXT_CTRL;
+
+ *mapping = NULL;
+
+ /* Mask the query flags. */
+ v4l2_id &= V4L2_CTRL_ID_MASK;
+
+ /* Find the control. */
+ __uvc_find_control(video->processing, v4l2_id, mapping, &ctrl, next);
+ if (ctrl && !next)
+ return ctrl;
+
+ list_for_each_entry(entity, &video->iterms, chain) {
+ __uvc_find_control(entity, v4l2_id, mapping, &ctrl, next);
+ if (ctrl && !next)
+ return ctrl;
+ }
+
+ list_for_each_entry(entity, &video->extensions, chain) {
+ __uvc_find_control(entity, v4l2_id, mapping, &ctrl, next);
+ if (ctrl && !next)
+ return ctrl;
+ }
+
+ if (ctrl == NULL && !next)
+ uvc_trace(UVC_TRACE_CONTROL, "Control 0x%08x not found.\n",
+ v4l2_id);
+
+ return ctrl;
+}
+
+int uvc_query_v4l2_ctrl(struct uvc_video_device *video,
+ struct v4l2_queryctrl *v4l2_ctrl)
+{
+ struct uvc_control *ctrl;
+ struct uvc_control_mapping *mapping;
+ struct uvc_menu_info *menu;
+ unsigned int i;
+ __u8 data[8];
+ int ret;
+
+ ctrl = uvc_find_control(video, v4l2_ctrl->id, &mapping);
+ if (ctrl == NULL)
+ return -EINVAL;
+
+ v4l2_ctrl->id = mapping->id;
+ v4l2_ctrl->type = mapping->v4l2_type;
+ strncpy(v4l2_ctrl->name, mapping->name, sizeof v4l2_ctrl->name);
+ v4l2_ctrl->flags = 0;
+
+ if (!(ctrl->info->flags & UVC_CONTROL_SET_CUR))
+ v4l2_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+ if (ctrl->info->flags & UVC_CONTROL_GET_DEF) {
+ if ((ret = uvc_query_ctrl(video->dev, GET_DEF, ctrl->entity->id,
+ video->dev->intfnum, ctrl->info->selector,
+ &data, ctrl->info->size)) < 0)
+ return ret;
+ v4l2_ctrl->default_value = uvc_get_le_value(data, mapping);
+ }
+
+ if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) {
+ v4l2_ctrl->minimum = 0;
+ v4l2_ctrl->maximum = mapping->menu_count - 1;
+ v4l2_ctrl->step = 1;
+
+ menu = mapping->menu_info;
+ for (i = 0; i < mapping->menu_count; ++i, ++menu) {
+ if (menu->value == v4l2_ctrl->default_value) {
+ v4l2_ctrl->default_value = i;
+ break;
+ }
+ }
+
+ return 0;
+ }
+
+ if (ctrl->info->flags & UVC_CONTROL_GET_MIN) {
+ if ((ret = uvc_query_ctrl(video->dev, GET_MIN, ctrl->entity->id,
+ video->dev->intfnum, ctrl->info->selector,
+ &data, ctrl->info->size)) < 0)
+ return ret;
+ v4l2_ctrl->minimum = uvc_get_le_value(data, mapping);
+ }
+ if (ctrl->info->flags & UVC_CONTROL_GET_MAX) {
+ if ((ret = uvc_query_ctrl(video->dev, GET_MAX, ctrl->entity->id,
+ video->dev->intfnum, ctrl->info->selector,
+ &data, ctrl->info->size)) < 0)
+ return ret;
+ v4l2_ctrl->maximum = uvc_get_le_value(data, mapping);
+ }
+ if (ctrl->info->flags & UVC_CONTROL_GET_RES) {
+ if ((ret = uvc_query_ctrl(video->dev, GET_RES, ctrl->entity->id,
+ video->dev->intfnum, ctrl->info->selector,
+ &data, ctrl->info->size)) < 0)
+ return ret;
+ v4l2_ctrl->step = uvc_get_le_value(data, mapping);
+ }
+
+ return 0;
+}
+
+
+/* --------------------------------------------------------------------------
+ * Control transactions
+ *
+ * To make extended set operations as atomic as the hardware allows, controls
+ * are handled using begin/commit/rollback operations.
+ *
+ * At the beginning of a set request, uvc_ctrl_begin should be called to
+ * initialize the request. This function acquires the control lock.
+ *
+ * When setting a control, the new value is stored in the control data field
+ * at position UVC_CTRL_DATA_CURRENT. The control is then marked as dirty for
+ * later processing. If the UVC and V4L2 control sizes differ, the current
+ * value is loaded from the hardware before storing the new value in the data
+ * field.
+ *
+ * After processing all controls in the transaction, uvc_ctrl_commit or
+ * uvc_ctrl_rollback must be called to apply the pending changes to the
+ * hardware or revert them. When applying changes, all controls marked as
+ * dirty will be modified in the UVC device, and the dirty flag will be
+ * cleared. When reverting controls, the control data field
+ * UVC_CTRL_DATA_CURRENT is reverted to its previous value
+ * (UVC_CTRL_DATA_BACKUP) for all dirty controls. Both functions release the
+ * control lock.
+ */
+int uvc_ctrl_begin(struct uvc_video_device *video)
+{
+ return mutex_lock_interruptible(&video->ctrl_mutex) ? -ERESTARTSYS : 0;
+}
+
+static int uvc_ctrl_commit_entity(struct uvc_device *dev,
+ struct uvc_entity *entity, int rollback)
+{
+ struct uvc_control *ctrl;
+ unsigned int i;
+ int ret;
+
+ if (entity == NULL)
+ return 0;
+
+ for (i = 0; i < entity->ncontrols; ++i) {
+ ctrl = &entity->controls[i];
+ if (ctrl->info == NULL || !ctrl->dirty)
+ continue;
+
+ if (!rollback)
+ ret = uvc_query_ctrl(dev, SET_CUR, ctrl->entity->id,
+ dev->intfnum, ctrl->info->selector,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
+ ctrl->info->size);
+ else
+ ret = 0;
+
+ if (rollback || ret < 0)
+ memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP),
+ ctrl->info->size);
+
+ if ((ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0)
+ ctrl->loaded = 0;
+
+ ctrl->dirty = 0;
+
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+int __uvc_ctrl_commit(struct uvc_video_device *video, int rollback)
+{
+ struct uvc_entity *entity;
+ int ret = 0;
+
+ /* Find the control. */
+ ret = uvc_ctrl_commit_entity(video->dev, video->processing, rollback);
+ if (ret < 0)
+ goto done;
+
+ list_for_each_entry(entity, &video->iterms, chain) {
+ ret = uvc_ctrl_commit_entity(video->dev, entity, rollback);
+ if (ret < 0)
+ goto done;
+ }
+
+ list_for_each_entry(entity, &video->extensions, chain) {
+ ret = uvc_ctrl_commit_entity(video->dev, entity, rollback);
+ if (ret < 0)
+ goto done;
+ }
+
+done:
+ mutex_unlock(&video->ctrl_mutex);
+ return ret;
+}
+
+int uvc_ctrl_get(struct uvc_video_device *video,
+ struct v4l2_ext_control *xctrl)
+{
+ struct uvc_control *ctrl;
+ struct uvc_control_mapping *mapping;
+ struct uvc_menu_info *menu;
+ unsigned int i;
+ int ret;
+
+ ctrl = uvc_find_control(video, xctrl->id, &mapping);
+ if (ctrl == NULL || (ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0)
+ return -EINVAL;
+
+ if (!ctrl->loaded) {
+ ret = uvc_query_ctrl(video->dev, GET_CUR, ctrl->entity->id,
+ video->dev->intfnum, ctrl->info->selector,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
+ ctrl->info->size);
+ if (ret < 0)
+ return ret;
+
+ if ((ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) == 0)
+ ctrl->loaded = 1;
+ }
+
+ xctrl->value = uvc_get_le_value(
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), mapping);
+
+ if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) {
+ menu = mapping->menu_info;
+ for (i = 0; i < mapping->menu_count; ++i, ++menu) {
+ if (menu->value == xctrl->value) {
+ xctrl->value = i;
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+int uvc_ctrl_set(struct uvc_video_device *video,
+ struct v4l2_ext_control *xctrl)
+{
+ struct uvc_control *ctrl;
+ struct uvc_control_mapping *mapping;
+ s32 value = xctrl->value;
+ int ret;
+
+ ctrl = uvc_find_control(video, xctrl->id, &mapping);
+ if (ctrl == NULL || (ctrl->info->flags & UVC_CONTROL_SET_CUR) == 0)
+ return -EINVAL;
+
+ if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) {
+ if (value < 0 || value >= mapping->menu_count)
+ return -EINVAL;
+ value = mapping->menu_info[value].value;
+ }
+
+ if (!ctrl->loaded && (ctrl->info->size * 8) != mapping->size) {
+ if ((ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0) {
+ memset(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
+ 0, ctrl->info->size);
+ } else {
+ ret = uvc_query_ctrl(video->dev, GET_CUR,
+ ctrl->entity->id, video->dev->intfnum,
+ ctrl->info->selector,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
+ ctrl->info->size);
+ if (ret < 0)
+ return ret;
+ }
+
+ if ((ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) == 0)
+ ctrl->loaded = 1;
+ }
+
+ if (!ctrl->dirty) {
+ memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP),
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
+ ctrl->info->size);
+ }
+
+ uvc_set_le_value(value,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), mapping);
+
+ ctrl->dirty = 1;
+ ctrl->modified = 1;
+ return 0;
+}
+
+/* --------------------------------------------------------------------------
+ * Dynamic controls
+ */
+
+int uvc_xu_ctrl_query(struct uvc_video_device *video,
+ struct uvc_xu_control *xctrl, int set)
+{
+ struct uvc_entity *entity;
+ struct uvc_control *ctrl = NULL;
+ unsigned int i, found = 0;
+ __u8 *data;
+ int ret;
+
+ /* Find the extension unit. */
+ list_for_each_entry(entity, &video->extensions, chain) {
+ if (entity->id == xctrl->unit)
+ break;
+ }
+
+ if (entity->id != xctrl->unit) {
+ uvc_trace(UVC_TRACE_CONTROL, "Extension unit %u not found.\n",
+ xctrl->unit);
+ return -EINVAL;
+ }
+
+ /* Find the control. */
+ for (i = 0; i < entity->ncontrols; ++i) {
+ ctrl = &entity->controls[i];
+ if (ctrl->info == NULL)
+ continue;
+
+ if (ctrl->info->selector == xctrl->selector) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (!found) {
+ uvc_trace(UVC_TRACE_CONTROL,
+ "Control " UVC_GUID_FORMAT "/%u not found.\n",
+ UVC_GUID_ARGS(entity->extension.guidExtensionCode),
+ xctrl->selector);
+ return -EINVAL;
+ }
+
+ /* Validate control data size. */
+ if (ctrl->info->size != xctrl->size)
+ return -EINVAL;
+
+ if ((set && !(ctrl->info->flags & UVC_CONTROL_SET_CUR)) ||
+ (!set && !(ctrl->info->flags & UVC_CONTROL_GET_CUR)))
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&video->ctrl_mutex))
+ return -ERESTARTSYS;
+
+ memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP),
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
+ xctrl->size);
+ data = uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT);
+
+ if (set && copy_from_user(data, xctrl->data, xctrl->size)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ ret = uvc_query_ctrl(video->dev, set ? SET_CUR : GET_CUR, xctrl->unit,
+ video->dev->intfnum, xctrl->selector, data,
+ xctrl->size);
+ if (ret < 0)
+ goto out;
+
+ if (!set && copy_to_user(xctrl->data, data, xctrl->size)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+out:
+ if (ret)
+ memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP),
+ xctrl->size);
+
+ mutex_unlock(&video->ctrl_mutex);
+ return ret;
+}
+
+/* --------------------------------------------------------------------------
+ * Suspend/resume
+ */
+
+/*
+ * Restore control values after resume, skipping controls that haven't been
+ * changed.
+ *
+ * TODO
+ * - Don't restore modified controls that are back to their default value.
+ * - Handle restore order (Auto-Exposure Mode should be restored before
+ * Exposure Time).
+ */
+int uvc_ctrl_resume_device(struct uvc_device *dev)
+{
+ struct uvc_control *ctrl;
+ struct uvc_entity *entity;
+ unsigned int i;
+ int ret;
+
+ /* Walk the entities list and restore controls when possible. */
+ list_for_each_entry(entity, &dev->entities, list) {
+
+ for (i = 0; i < entity->ncontrols; ++i) {
+ ctrl = &entity->controls[i];
+
+ if (ctrl->info == NULL || !ctrl->modified ||
+ (ctrl->info->flags & UVC_CONTROL_RESTORE) == 0)
+ continue;
+
+ printk(KERN_INFO "restoring control " UVC_GUID_FORMAT
+ "/%u/%u\n", UVC_GUID_ARGS(ctrl->info->entity),
+ ctrl->info->index, ctrl->info->selector);
+ ctrl->dirty = 1;
+ }
+
+ ret = uvc_ctrl_commit_entity(dev, entity, 0);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+/* --------------------------------------------------------------------------
+ * Control and mapping handling
+ */
+
+static void uvc_ctrl_add_ctrl(struct uvc_device *dev,
+ struct uvc_control_info *info)
+{
+ struct uvc_entity *entity;
+ struct uvc_control *ctrl = NULL;
+ int ret, found = 0;
+ unsigned int i;
+
+ list_for_each_entry(entity, &dev->entities, list) {
+ if (!uvc_entity_match_guid(entity, info->entity))
+ continue;
+
+ for (i = 0; i < entity->ncontrols; ++i) {
+ ctrl = &entity->controls[i];
+ if (ctrl->index == info->index) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found)
+ break;
+ }
+
+ if (!found)
+ return;
+
+ if (UVC_ENTITY_TYPE(entity) == VC_EXTENSION_UNIT) {
+ /* Check if the device control information and length match
+ * the user supplied information.
+ */
+ __u32 flags;
+ __le16 size;
+ __u8 inf;
+
+ if ((ret = uvc_query_ctrl(dev, GET_LEN, ctrl->entity->id,
+ dev->intfnum, info->selector, (__u8 *)&size, 2)) < 0) {
+ uvc_trace(UVC_TRACE_CONTROL, "GET_LEN failed on "
+ "control " UVC_GUID_FORMAT "/%u (%d).\n",
+ UVC_GUID_ARGS(info->entity), info->selector,
+ ret);
+ return;
+ }
+
+ if (info->size != le16_to_cpu(size)) {
+ uvc_trace(UVC_TRACE_CONTROL, "Control " UVC_GUID_FORMAT
+ "/%u size doesn't match user supplied "
+ "value.\n", UVC_GUID_ARGS(info->entity),
+ info->selector);
+ return;
+ }
+
+ if ((ret = uvc_query_ctrl(dev, GET_INFO, ctrl->entity->id,
+ dev->intfnum, info->selector, &inf, 1)) < 0) {
+ uvc_trace(UVC_TRACE_CONTROL, "GET_INFO failed on "
+ "control " UVC_GUID_FORMAT "/%u (%d).\n",
+ UVC_GUID_ARGS(info->entity), info->selector,
+ ret);
+ return;
+ }
+
+ flags = info->flags;
+ if (((flags & UVC_CONTROL_GET_CUR) && !(inf & (1 << 0))) ||
+ ((flags & UVC_CONTROL_SET_CUR) && !(inf & (1 << 1)))) {
+ uvc_trace(UVC_TRACE_CONTROL, "Control "
+ UVC_GUID_FORMAT "/%u flags don't match "
+ "supported operations.\n",
+ UVC_GUID_ARGS(info->entity), info->selector);
+ return;
+ }
+ }
+
+ ctrl->info = info;
+ ctrl->data = kmalloc(ctrl->info->size * UVC_CTRL_NDATA, GFP_KERNEL);
+ uvc_trace(UVC_TRACE_CONTROL, "Added control " UVC_GUID_FORMAT "/%u "
+ "to device %s entity %u\n", UVC_GUID_ARGS(ctrl->info->entity),
+ ctrl->info->selector, dev->udev->devpath, entity->id);
+}
+
+/*
+ * Add an item to the UVC control information list, and instantiate a control
+ * structure for each device that supports the control.
+ */
+int uvc_ctrl_add_info(struct uvc_control_info *info)
+{
+ struct uvc_control_info *ctrl;
+ struct uvc_device *dev;
+ int ret = 0;
+
+ /* Find matching controls by walking the devices, entities and
+ * controls list.
+ */
+ mutex_lock(&uvc_driver.ctrl_mutex);
+
+ /* First check if the list contains a control matching the new one.
+ * Bail out if it does.
+ */
+ list_for_each_entry(ctrl, &uvc_driver.controls, list) {
+ if (memcmp(ctrl->entity, info->entity, 16))
+ continue;
+
+ if (ctrl->selector == info->selector) {
+ uvc_trace(UVC_TRACE_CONTROL, "Control "
+ UVC_GUID_FORMAT "/%u is already defined.\n",
+ UVC_GUID_ARGS(info->entity), info->selector);
+ ret = -EEXIST;
+ goto end;
+ }
+ if (ctrl->index == info->index) {
+ uvc_trace(UVC_TRACE_CONTROL, "Control "
+ UVC_GUID_FORMAT "/%u would overwrite index "
+ "%d.\n", UVC_GUID_ARGS(info->entity),
+ info->selector, info->index);
+ ret = -EEXIST;
+ goto end;
+ }
+ }
+
+ list_for_each_entry(dev, &uvc_driver.devices, list)
+ uvc_ctrl_add_ctrl(dev, info);
+
+ INIT_LIST_HEAD(&info->mappings);
+ list_add_tail(&info->list, &uvc_driver.controls);
+end:
+ mutex_unlock(&uvc_driver.ctrl_mutex);
+ return ret;
+}
+
+int uvc_ctrl_add_mapping(struct uvc_control_mapping *mapping)
+{
+ struct uvc_control_info *info;
+ struct uvc_control_mapping *map;
+ int ret = -EINVAL;
+
+ if (mapping->id & ~V4L2_CTRL_ID_MASK) {
+ uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s' with "
+ "invalid control id 0x%08x\n", mapping->name,
+ mapping->id);
+ return -EINVAL;
+ }
+
+ mutex_lock(&uvc_driver.ctrl_mutex);
+ list_for_each_entry(info, &uvc_driver.controls, list) {
+ if (memcmp(info->entity, mapping->entity, 16) ||
+ info->selector != mapping->selector)
+ continue;
+
+ if (info->size * 8 < mapping->size + mapping->offset) {
+ uvc_trace(UVC_TRACE_CONTROL, "Mapping '%s' would "
+ "overflow control " UVC_GUID_FORMAT "/%u\n",
+ mapping->name, UVC_GUID_ARGS(info->entity),
+ info->selector);
+ ret = -EOVERFLOW;
+ goto end;
+ }
+
+ /* Check if the list contains a mapping matching the new one.
+ * Bail out if it does.
+ */
+ list_for_each_entry(map, &info->mappings, list) {
+ if (map->id == mapping->id) {
+ uvc_trace(UVC_TRACE_CONTROL, "Mapping '%s' is "
+ "already defined.\n", mapping->name);
+ ret = -EEXIST;
+ goto end;
+ }
+ }
+
+ mapping->ctrl = info;
+ list_add_tail(&mapping->list, &info->mappings);
+ uvc_trace(UVC_TRACE_CONTROL, "Adding mapping %s to control "
+ UVC_GUID_FORMAT "/%u.\n", mapping->name,
+ UVC_GUID_ARGS(info->entity), info->selector);
+
+ ret = 0;
+ break;
+ }
+end:
+ mutex_unlock(&uvc_driver.ctrl_mutex);
+ return ret;
+}
+
+/*
+ * Initialize device controls.
+ */
+int uvc_ctrl_init_device(struct uvc_device *dev)
+{
+ struct uvc_control_info *info;
+ struct uvc_control *ctrl;
+ struct uvc_entity *entity;
+ unsigned int i;
+
+ /* Walk the entities list and instantiate controls */
+ list_for_each_entry(entity, &dev->entities, list) {
+ unsigned int bControlSize = 0, ncontrols = 0;
+ __u8 *bmControls = NULL;
+
+ if (UVC_ENTITY_TYPE(entity) == VC_EXTENSION_UNIT) {
+ bmControls = entity->extension.bmControls;
+ bControlSize = entity->extension.bControlSize;
+ } else if (UVC_ENTITY_TYPE(entity) == VC_PROCESSING_UNIT) {
+ bmControls = entity->processing.bmControls;
+ bControlSize = entity->processing.bControlSize;
+ } else if (UVC_ENTITY_TYPE(entity) == ITT_CAMERA) {
+ bmControls = entity->camera.bmControls;
+ bControlSize = entity->camera.bControlSize;
+ }
+
+ for (i = 0; i < bControlSize; ++i)
+ ncontrols += hweight8(bmControls[i]);
+
+ if (ncontrols == 0)
+ continue;
+
+ entity->controls = kzalloc(ncontrols*sizeof *ctrl, GFP_KERNEL);
+ if (entity->controls == NULL)
+ return -ENOMEM;
+
+ entity->ncontrols = ncontrols;
+
+ ctrl = entity->controls;
+ for (i = 0; i < bControlSize * 8; ++i) {
+ if (uvc_get_bit(bmControls, i) == 0)
+ continue;
+
+ ctrl->entity = entity;
+ ctrl->index = i;
+ ctrl++;
+ }
+ }
+
+ /* Walk the controls info list and associate them with the device
+ * controls, then add the device to the global device list. This has
+ * to be done while holding the controls lock, to make sure
+ * uvc_ctrl_add_info() will not get called in-between.
+ */
+ mutex_lock(&uvc_driver.ctrl_mutex);
+ list_for_each_entry(info, &uvc_driver.controls, list)
+ uvc_ctrl_add_ctrl(dev, info);
+
+ list_add_tail(&dev->list, &uvc_driver.devices);
+ mutex_unlock(&uvc_driver.ctrl_mutex);
+
+ return 0;
+}
+
+/*
+ * Cleanup device controls.
+ */
+void uvc_ctrl_cleanup_device(struct uvc_device *dev)
+{
+ struct uvc_entity *entity;
+ unsigned int i;
+
+ /* Remove the device from the global devices list */
+ mutex_lock(&uvc_driver.ctrl_mutex);
+ if (dev->list.next != NULL)
+ list_del(&dev->list);
+ mutex_unlock(&uvc_driver.ctrl_mutex);
+
+ list_for_each_entry(entity, &dev->entities, list) {
+ for (i = 0; i < entity->ncontrols; ++i)
+ kfree(entity->controls[i].data);
+
+ kfree(entity->controls);
+ }
+}
+
+void uvc_ctrl_init(void)
+{
+ struct uvc_control_info *ctrl = uvc_ctrls;
+ struct uvc_control_info *cend = ctrl + ARRAY_SIZE(uvc_ctrls);
+ struct uvc_control_mapping *mapping = uvc_ctrl_mappings;
+ struct uvc_control_mapping *mend =
+ mapping + ARRAY_SIZE(uvc_ctrl_mappings);
+
+ for (; ctrl < cend; ++ctrl)
+ uvc_ctrl_add_info(ctrl);
+
+ for (; mapping < mend; ++mapping)
+ uvc_ctrl_add_mapping(mapping);
+}
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
new file mode 100644
index 0000000..60ced58
--- /dev/null
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -0,0 +1,1955 @@
+/*
+ * uvc_driver.c -- USB Video Class driver
+ *
+ * Copyright (C) 2005-2008
+ * Laurent Pinchart (laurent.pinchart@skynet.be)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+/*
+ * This driver aims to support video input devices compliant with the 'USB
+ * Video Class' specification.
+ *
+ * The driver doesn't support the deprecated v4l1 interface. It implements the
+ * mmap capture method only, and doesn't do any image format conversion in
+ * software. If your user-space application doesn't support YUYV or MJPEG, fix
+ * it :-). Please note that the MJPEG data have been stripped from their
+ * Huffman tables (DHT marker), you will need to add it back if your JPEG
+ * codec can't handle MJPEG data.
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+#include <asm/atomic.h>
+
+#include <media/v4l2-common.h>
+
+#include "uvcvideo.h"
+
+#define DRIVER_AUTHOR "Laurent Pinchart <laurent.pinchart@skynet.be>"
+#define DRIVER_DESC "USB Video Class driver"
+#ifndef DRIVER_VERSION
+#define DRIVER_VERSION "v0.1.0"
+#endif
+
+static unsigned int uvc_quirks_param;
+unsigned int uvc_trace_param;
+
+/* ------------------------------------------------------------------------
+ * Control, formats, ...
+ */
+
+static struct uvc_format_desc uvc_fmts[] = {
+ {
+ .name = "YUV 4:2:2 (YUYV)",
+ .guid = UVC_GUID_FORMAT_YUY2,
+ .fcc = V4L2_PIX_FMT_YUYV,
+ },
+ {
+ .name = "YUV 4:2:0 (NV12)",
+ .guid = UVC_GUID_FORMAT_NV12,
+ .fcc = V4L2_PIX_FMT_NV12,
+ },
+ {
+ .name = "MJPEG",
+ .guid = UVC_GUID_FORMAT_MJPEG,
+ .fcc = V4L2_PIX_FMT_MJPEG,
+ },
+ {
+ .name = "YVU 4:2:0 (YV12)",
+ .guid = UVC_GUID_FORMAT_YV12,
+ .fcc = V4L2_PIX_FMT_YVU420,
+ },
+ {
+ .name = "YUV 4:2:0 (I420)",
+ .guid = UVC_GUID_FORMAT_I420,
+ .fcc = V4L2_PIX_FMT_YUV420,
+ },
+ {
+ .name = "YUV 4:2:2 (UYVY)",
+ .guid = UVC_GUID_FORMAT_UYVY,
+ .fcc = V4L2_PIX_FMT_UYVY,
+ },
+ {
+ .name = "Greyscale",
+ .guid = UVC_GUID_FORMAT_Y800,
+ .fcc = V4L2_PIX_FMT_GREY,
+ },
+ {
+ .name = "RGB Bayer",
+ .guid = UVC_GUID_FORMAT_BY8,
+ .fcc = V4L2_PIX_FMT_SBGGR8,
+ },
+};
+
+/* ------------------------------------------------------------------------
+ * Utility functions
+ */
+
+struct usb_host_endpoint *uvc_find_endpoint(struct usb_host_interface *alts,
+ __u8 epaddr)
+{
+ struct usb_host_endpoint *ep;
+ unsigned int i;
+
+ for (i = 0; i < alts->desc.bNumEndpoints; ++i) {
+ ep = &alts->endpoint[i];
+ if (ep->desc.bEndpointAddress == epaddr)
+ return ep;
+ }
+
+ return NULL;
+}
+
+static struct uvc_format_desc *uvc_format_by_guid(const __u8 guid[16])
+{
+ unsigned int len = ARRAY_SIZE(uvc_fmts);
+ unsigned int i;
+
+ for (i = 0; i < len; ++i) {
+ if (memcmp(guid, uvc_fmts[i].guid, 16) == 0)
+ return &uvc_fmts[i];
+ }
+
+ return NULL;
+}
+
+static __u32 uvc_colorspace(const __u8 primaries)
+{
+ static const __u8 colorprimaries[] = {
+ 0,
+ V4L2_COLORSPACE_SRGB,
+ V4L2_COLORSPACE_470_SYSTEM_M,
+ V4L2_COLORSPACE_470_SYSTEM_BG,
+ V4L2_COLORSPACE_SMPTE170M,
+ V4L2_COLORSPACE_SMPTE240M,
+ };
+
+ if (primaries < ARRAY_SIZE(colorprimaries))
+ return colorprimaries[primaries];
+
+ return 0;
+}
+
+/* Simplify a fraction using a simple continued fraction decomposition. The
+ * idea here is to convert fractions such as 333333/10000000 to 1/30 using
+ * 32 bit arithmetic only. The algorithm is not perfect and relies upon two
+ * arbitrary parameters to remove non-significative terms from the simple
+ * continued fraction decomposition. Using 8 and 333 for n_terms and threshold
+ * respectively seems to give nice results.
+ */
+void uvc_simplify_fraction(uint32_t *numerator, uint32_t *denominator,
+ unsigned int n_terms, unsigned int threshold)
+{
+ uint32_t *an;
+ uint32_t x, y, r;
+ unsigned int i, n;
+
+ an = kmalloc(n_terms * sizeof *an, GFP_KERNEL);
+ if (an == NULL)
+ return;
+
+ /* Convert the fraction to a simple continued fraction. See
+ * http://mathforum.org/dr.math/faq/faq.fractions.html
+ * Stop if the current term is bigger than or equal to the given
+ * threshold.
+ */
+ x = *numerator;
+ y = *denominator;
+
+ for (n = 0; n < n_terms && y != 0; ++n) {
+ an[n] = x / y;
+ if (an[n] >= threshold) {
+ if (n < 2)
+ n++;
+ break;
+ }
+
+ r = x - an[n] * y;
+ x = y;
+ y = r;
+ }
+
+ /* Expand the simple continued fraction back to an integer fraction. */
+ x = 0;
+ y = 1;
+
+ for (i = n; i > 0; --i) {
+ r = y;
+ y = an[i-1] * y + x;
+ x = r;
+ }
+
+ *numerator = y;
+ *denominator = x;
+ kfree(an);
+}
+
+/* Convert a fraction to a frame interval in 100ns multiples. The idea here is
+ * to compute numerator / denominator * 10000000 using 32 bit fixed point
+ * arithmetic only.
+ */
+uint32_t uvc_fraction_to_interval(uint32_t numerator, uint32_t denominator)
+{
+ uint32_t multiplier;
+
+ /* Saturate the result if the operation would overflow. */
+ if (denominator == 0 ||
+ numerator/denominator >= ((uint32_t)-1)/10000000)
+ return (uint32_t)-1;
+
+ /* Divide both the denominator and the multiplier by two until
+ * numerator * multiplier doesn't overflow. If anyone knows a better
+ * algorithm please let me know.
+ */
+ multiplier = 10000000;
+ while (numerator > ((uint32_t)-1)/multiplier) {
+ multiplier /= 2;
+ denominator /= 2;
+ }
+
+ return denominator ? numerator * multiplier / denominator : 0;
+}
+
+/* ------------------------------------------------------------------------
+ * Terminal and unit management
+ */
+
+static struct uvc_entity *uvc_entity_by_id(struct uvc_device *dev, int id)
+{
+ struct uvc_entity *entity;
+
+ list_for_each_entry(entity, &dev->entities, list) {
+ if (entity->id == id)
+ return entity;
+ }
+
+ return NULL;
+}
+
+static struct uvc_entity *uvc_entity_by_reference(struct uvc_device *dev,
+ int id, struct uvc_entity *entity)
+{
+ unsigned int i;
+
+ if (entity == NULL)
+ entity = list_entry(&dev->entities, struct uvc_entity, list);
+
+ list_for_each_entry_continue(entity, &dev->entities, list) {
+ switch (UVC_ENTITY_TYPE(entity)) {
+ case TT_STREAMING:
+ if (entity->output.bSourceID == id)
+ return entity;
+ break;
+
+ case VC_PROCESSING_UNIT:
+ if (entity->processing.bSourceID == id)
+ return entity;
+ break;
+
+ case VC_SELECTOR_UNIT:
+ for (i = 0; i < entity->selector.bNrInPins; ++i)
+ if (entity->selector.baSourceID[i] == id)
+ return entity;
+ break;
+
+ case VC_EXTENSION_UNIT:
+ for (i = 0; i < entity->extension.bNrInPins; ++i)
+ if (entity->extension.baSourceID[i] == id)
+ return entity;
+ break;
+ }
+ }
+
+ return NULL;
+}
+
+/* ------------------------------------------------------------------------
+ * Descriptors handling
+ */
+
+static int uvc_parse_format(struct uvc_device *dev,
+ struct uvc_streaming *streaming, struct uvc_format *format,
+ __u32 **intervals, unsigned char *buffer, int buflen)
+{
+ struct usb_interface *intf = streaming->intf;
+ struct usb_host_interface *alts = intf->cur_altsetting;
+ struct uvc_format_desc *fmtdesc;
+ struct uvc_frame *frame;
+ const unsigned char *start = buffer;
+ unsigned int interval;
+ unsigned int i, n;
+ __u8 ftype;
+
+ format->type = buffer[2];
+ format->index = buffer[3];
+
+ switch (buffer[2]) {
+ case VS_FORMAT_UNCOMPRESSED:
+ case VS_FORMAT_FRAME_BASED:
+ if (buflen < 27) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+ "interface %d FORMAT error\n",
+ dev->udev->devnum,
+ alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ /* Find the format descriptor from its GUID. */
+ fmtdesc = uvc_format_by_guid(&buffer[5]);
+
+ if (fmtdesc != NULL) {
+ strncpy(format->name, fmtdesc->name,
+ sizeof format->name);
+ format->fcc = fmtdesc->fcc;
+ } else {
+ uvc_printk(KERN_INFO, "Unknown video format "
+ UVC_GUID_FORMAT "\n",
+ UVC_GUID_ARGS(&buffer[5]));
+ snprintf(format->name, sizeof format->name,
+ UVC_GUID_FORMAT, UVC_GUID_ARGS(&buffer[5]));
+ format->fcc = 0;
+ }
+
+ format->bpp = buffer[21];
+ if (buffer[2] == VS_FORMAT_UNCOMPRESSED) {
+ ftype = VS_FRAME_UNCOMPRESSED;
+ } else {
+ ftype = VS_FRAME_FRAME_BASED;
+ if (buffer[27])
+ format->flags = UVC_FMT_FLAG_COMPRESSED;
+ }
+ break;
+
+ case VS_FORMAT_MJPEG:
+ if (buflen < 11) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+ "interface %d FORMAT error\n",
+ dev->udev->devnum,
+ alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ strncpy(format->name, "MJPEG", sizeof format->name);
+ format->fcc = V4L2_PIX_FMT_MJPEG;
+ format->flags = UVC_FMT_FLAG_COMPRESSED;
+ format->bpp = 0;
+ ftype = VS_FRAME_MJPEG;
+ break;
+
+ case VS_FORMAT_DV:
+ if (buflen < 9) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+ "interface %d FORMAT error\n",
+ dev->udev->devnum,
+ alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ switch (buffer[8] & 0x7f) {
+ case 0:
+ strncpy(format->name, "SD-DV", sizeof format->name);
+ break;
+ case 1:
+ strncpy(format->name, "SDL-DV", sizeof format->name);
+ break;
+ case 2:
+ strncpy(format->name, "HD-DV", sizeof format->name);
+ break;
+ default:
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+ "interface %d: unknown DV format %u\n",
+ dev->udev->devnum,
+ alts->desc.bInterfaceNumber, buffer[8]);
+ return -EINVAL;
+ }
+
+ strncat(format->name, buffer[8] & (1 << 7) ? " 60Hz" : " 50Hz",
+ sizeof format->name);
+
+ format->fcc = V4L2_PIX_FMT_DV;
+ format->flags = UVC_FMT_FLAG_COMPRESSED | UVC_FMT_FLAG_STREAM;
+ format->bpp = 0;
+ ftype = 0;
+
+ /* Create a dummy frame descriptor. */
+ frame = &format->frame[0];
+ memset(&format->frame[0], 0, sizeof format->frame[0]);
+ frame->bFrameIntervalType = 1;
+ frame->dwDefaultFrameInterval = 1;
+ frame->dwFrameInterval = *intervals;
+ *(*intervals)++ = 1;
+ format->nframes = 1;
+ break;
+
+ case VS_FORMAT_MPEG2TS:
+ case VS_FORMAT_STREAM_BASED:
+ /* Not supported yet. */
+ default:
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+ "interface %d unsupported format %u\n",
+ dev->udev->devnum, alts->desc.bInterfaceNumber,
+ buffer[2]);
+ return -EINVAL;
+ }
+
+ uvc_trace(UVC_TRACE_DESCR, "Found format %s.\n", format->name);
+
+ buflen -= buffer[0];
+ buffer += buffer[0];
+
+ /* Parse the frame descriptors. Only uncompressed, MJPEG and frame
+ * based formats have frame descriptors.
+ */
+ while (buflen > 2 && buffer[2] == ftype) {
+ frame = &format->frame[format->nframes];
+
+ if (ftype != VS_FRAME_FRAME_BASED)
+ n = buflen > 25 ? buffer[25] : 0;
+ else
+ n = buflen > 21 ? buffer[21] : 0;
+
+ n = n ? n : 3;
+
+ if (buflen < 26 + 4*n) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+ "interface %d FRAME error\n", dev->udev->devnum,
+ alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ frame->bFrameIndex = buffer[3];
+ frame->bmCapabilities = buffer[4];
+ frame->wWidth = le16_to_cpup((__le16 *)&buffer[5]);
+ frame->wHeight = le16_to_cpup((__le16 *)&buffer[7]);
+ frame->dwMinBitRate = le32_to_cpup((__le32 *)&buffer[9]);
+ frame->dwMaxBitRate = le32_to_cpup((__le32 *)&buffer[13]);
+ if (ftype != VS_FRAME_FRAME_BASED) {
+ frame->dwMaxVideoFrameBufferSize =
+ le32_to_cpup((__le32 *)&buffer[17]);
+ frame->dwDefaultFrameInterval =
+ le32_to_cpup((__le32 *)&buffer[21]);
+ frame->bFrameIntervalType = buffer[25];
+ } else {
+ frame->dwMaxVideoFrameBufferSize = 0;
+ frame->dwDefaultFrameInterval =
+ le32_to_cpup((__le32 *)&buffer[17]);
+ frame->bFrameIntervalType = buffer[21];
+ }
+ frame->dwFrameInterval = *intervals;
+
+ /* Several UVC chipsets screw up dwMaxVideoFrameBufferSize
+ * completely. Observed behaviours range from setting the
+ * value to 1.1x the actual frame size of hardwiring the
+ * 16 low bits to 0. This results in a higher than necessary
+ * memory usage as well as a wrong image size information. For
+ * uncompressed formats this can be fixed by computing the
+ * value from the frame size.
+ */
+ if (!(format->flags & UVC_FMT_FLAG_COMPRESSED))
+ frame->dwMaxVideoFrameBufferSize = format->bpp
+ * frame->wWidth * frame->wHeight / 8;
+
+ /* Some bogus devices report dwMinFrameInterval equal to
+ * dwMaxFrameInterval and have dwFrameIntervalStep set to
+ * zero. Setting all null intervals to 1 fixes the problem and
+ * some other divisions by zero which could happen.
+ */
+ for (i = 0; i < n; ++i) {
+ interval = le32_to_cpup((__le32 *)&buffer[26+4*i]);
+ *(*intervals)++ = interval ? interval : 1;
+ }
+
+ /* Make sure that the default frame interval stays between
+ * the boundaries.
+ */
+ n -= frame->bFrameIntervalType ? 1 : 2;
+ frame->dwDefaultFrameInterval =
+ min(frame->dwFrameInterval[n],
+ max(frame->dwFrameInterval[0],
+ frame->dwDefaultFrameInterval));
+
+ uvc_trace(UVC_TRACE_DESCR, "- %ux%u (%u.%u fps)\n",
+ frame->wWidth, frame->wHeight,
+ 10000000/frame->dwDefaultFrameInterval,
+ (100000000/frame->dwDefaultFrameInterval)%10);
+
+ format->nframes++;
+ buflen -= buffer[0];
+ buffer += buffer[0];
+ }
+
+ if (buflen > 2 && buffer[2] == VS_STILL_IMAGE_FRAME) {
+ buflen -= buffer[0];
+ buffer += buffer[0];
+ }
+
+ if (buflen > 2 && buffer[2] == VS_COLORFORMAT) {
+ if (buflen < 6) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+ "interface %d COLORFORMAT error\n",
+ dev->udev->devnum,
+ alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ format->colorspace = uvc_colorspace(buffer[3]);
+
+ buflen -= buffer[0];
+ buffer += buffer[0];
+ }
+
+ return buffer - start;
+}
+
+static int uvc_parse_streaming(struct uvc_device *dev,
+ struct usb_interface *intf)
+{
+ struct uvc_streaming *streaming = NULL;
+ struct uvc_format *format;
+ struct uvc_frame *frame;
+ struct usb_host_interface *alts = &intf->altsetting[0];
+ unsigned char *_buffer, *buffer = alts->extra;
+ int _buflen, buflen = alts->extralen;
+ unsigned int nformats = 0, nframes = 0, nintervals = 0;
+ unsigned int size, i, n, p;
+ __u32 *interval;
+ __u16 psize;
+ int ret = -EINVAL;
+
+ if (intf->cur_altsetting->desc.bInterfaceSubClass
+ != SC_VIDEOSTREAMING) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d interface %d isn't a "
+ "video streaming interface\n", dev->udev->devnum,
+ intf->altsetting[0].desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ if (usb_driver_claim_interface(&uvc_driver.driver, intf, dev)) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d interface %d is already "
+ "claimed\n", dev->udev->devnum,
+ intf->altsetting[0].desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ streaming = kzalloc(sizeof *streaming, GFP_KERNEL);
+ if (streaming == NULL) {
+ usb_driver_release_interface(&uvc_driver.driver, intf);
+ return -EINVAL;
+ }
+
+ mutex_init(&streaming->mutex);
+ streaming->intf = usb_get_intf(intf);
+ streaming->intfnum = intf->cur_altsetting->desc.bInterfaceNumber;
+
+ /* The Pico iMage webcam has its class-specific interface descriptors
+ * after the endpoint descriptors.
+ */
+ if (buflen == 0) {
+ for (i = 0; i < alts->desc.bNumEndpoints; ++i) {
+ struct usb_host_endpoint *ep = &alts->endpoint[i];
+
+ if (ep->extralen == 0)
+ continue;
+
+ if (ep->extralen > 2 &&
+ ep->extra[1] == USB_DT_CS_INTERFACE) {
+ uvc_trace(UVC_TRACE_DESCR, "trying extra data "
+ "from endpoint %u.\n", i);
+ buffer = alts->endpoint[i].extra;
+ buflen = alts->endpoint[i].extralen;
+ break;
+ }
+ }
+ }
+
+ /* Skip the standard interface descriptors. */
+ while (buflen > 2 && buffer[1] != USB_DT_CS_INTERFACE) {
+ buflen -= buffer[0];
+ buffer += buffer[0];
+ }
+
+ if (buflen <= 2) {
+ uvc_trace(UVC_TRACE_DESCR, "no class-specific streaming "
+ "interface descriptors found.\n");
+ goto error;
+ }
+
+ /* Parse the header descriptor. */
+ if (buffer[2] == VS_OUTPUT_HEADER) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface "
+ "%d OUTPUT HEADER descriptor is not supported.\n",
+ dev->udev->devnum, alts->desc.bInterfaceNumber);
+ goto error;
+ } else if (buffer[2] == VS_INPUT_HEADER) {
+ p = buflen >= 5 ? buffer[3] : 0;
+ n = buflen >= 12 ? buffer[12] : 0;
+
+ if (buflen < 13 + p*n || buffer[2] != VS_INPUT_HEADER) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
+ "interface %d INPUT HEADER descriptor is "
+ "invalid.\n", dev->udev->devnum,
+ alts->desc.bInterfaceNumber);
+ goto error;
+ }
+
+ streaming->header.bNumFormats = p;
+ streaming->header.bEndpointAddress = buffer[6];
+ streaming->header.bmInfo = buffer[7];
+ streaming->header.bTerminalLink = buffer[8];
+ streaming->header.bStillCaptureMethod = buffer[9];
+ streaming->header.bTriggerSupport = buffer[10];
+ streaming->header.bTriggerUsage = buffer[11];
+ streaming->header.bControlSize = n;
+
+ streaming->header.bmaControls = kmalloc(p*n, GFP_KERNEL);
+ if (streaming->header.bmaControls == NULL) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ memcpy(streaming->header.bmaControls, &buffer[13], p*n);
+ } else {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface "
+ "%d HEADER descriptor not found.\n", dev->udev->devnum,
+ alts->desc.bInterfaceNumber);
+ goto error;
+ }
+
+ buflen -= buffer[0];
+ buffer += buffer[0];
+
+ _buffer = buffer;
+ _buflen = buflen;
+
+ /* Count the format and frame descriptors. */
+ while (_buflen > 2) {
+ switch (_buffer[2]) {
+ case VS_FORMAT_UNCOMPRESSED:
+ case VS_FORMAT_MJPEG:
+ case VS_FORMAT_FRAME_BASED:
+ nformats++;
+ break;
+
+ case VS_FORMAT_DV:
+ /* DV format has no frame descriptor. We will create a
+ * dummy frame descriptor with a dummy frame interval.
+ */
+ nformats++;
+ nframes++;
+ nintervals++;
+ break;
+
+ case VS_FORMAT_MPEG2TS:
+ case VS_FORMAT_STREAM_BASED:
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
+ "interface %d FORMAT %u is not supported.\n",
+ dev->udev->devnum,
+ alts->desc.bInterfaceNumber, _buffer[2]);
+ break;
+
+ case VS_FRAME_UNCOMPRESSED:
+ case VS_FRAME_MJPEG:
+ nframes++;
+ if (_buflen > 25)
+ nintervals += _buffer[25] ? _buffer[25] : 3;
+ break;
+
+ case VS_FRAME_FRAME_BASED:
+ nframes++;
+ if (_buflen > 21)
+ nintervals += _buffer[21] ? _buffer[21] : 3;
+ break;
+ }
+
+ _buflen -= _buffer[0];
+ _buffer += _buffer[0];
+ }
+
+ if (nformats == 0) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface "
+ "%d has no supported formats defined.\n",
+ dev->udev->devnum, alts->desc.bInterfaceNumber);
+ goto error;
+ }
+
+ size = nformats * sizeof *format + nframes * sizeof *frame
+ + nintervals * sizeof *interval;
+ format = kzalloc(size, GFP_KERNEL);
+ if (format == NULL) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ frame = (struct uvc_frame *)&format[nformats];
+ interval = (__u32 *)&frame[nframes];
+
+ streaming->format = format;
+ streaming->nformats = nformats;
+
+ /* Parse the format descriptors. */
+ while (buflen > 2) {
+ switch (buffer[2]) {
+ case VS_FORMAT_UNCOMPRESSED:
+ case VS_FORMAT_MJPEG:
+ case VS_FORMAT_DV:
+ case VS_FORMAT_FRAME_BASED:
+ format->frame = frame;
+ ret = uvc_parse_format(dev, streaming, format,
+ &interval, buffer, buflen);
+ if (ret < 0)
+ goto error;
+
+ frame += format->nframes;
+ format++;
+
+ buflen -= ret;
+ buffer += ret;
+ continue;
+
+ default:
+ break;
+ }
+
+ buflen -= buffer[0];
+ buffer += buffer[0];
+ }
+
+ /* Parse the alternate settings to find the maximum bandwidth. */
+ for (i = 0; i < intf->num_altsetting; ++i) {
+ struct usb_host_endpoint *ep;
+ alts = &intf->altsetting[i];
+ ep = uvc_find_endpoint(alts,
+ streaming->header.bEndpointAddress);
+ if (ep == NULL)
+ continue;
+
+ psize = le16_to_cpu(ep->desc.wMaxPacketSize);
+ psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3));
+ if (psize > streaming->maxpsize)
+ streaming->maxpsize = psize;
+ }
+
+ list_add_tail(&streaming->list, &dev->streaming);
+ return 0;
+
+error:
+ usb_driver_release_interface(&uvc_driver.driver, intf);
+ usb_put_intf(intf);
+ kfree(streaming->format);
+ kfree(streaming->header.bmaControls);
+ kfree(streaming);
+ return ret;
+}
+
+/* Parse vendor-specific extensions. */
+static int uvc_parse_vendor_control(struct uvc_device *dev,
+ const unsigned char *buffer, int buflen)
+{
+ struct usb_device *udev = dev->udev;
+ struct usb_host_interface *alts = dev->intf->cur_altsetting;
+ struct uvc_entity *unit;
+ unsigned int n, p;
+ int handled = 0;
+
+ switch (le16_to_cpu(dev->udev->descriptor.idVendor)) {
+ case 0x046d: /* Logitech */
+ if (buffer[1] != 0x41 || buffer[2] != 0x01)
+ break;
+
+ /* Logitech implements several vendor specific functions
+ * through vendor specific extension units (LXU).
+ *
+ * The LXU descriptors are similar to XU descriptors
+ * (see "USB Device Video Class for Video Devices", section
+ * 3.7.2.6 "Extension Unit Descriptor") with the following
+ * differences:
+ *
+ * ----------------------------------------------------------
+ * 0 bLength 1 Number
+ * Size of this descriptor, in bytes: 24+p+n*2
+ * ----------------------------------------------------------
+ * 23+p+n bmControlsType N Bitmap
+ * Individual bits in the set are defined:
+ * 0: Absolute
+ * 1: Relative
+ *
+ * This bitset is mapped exactly the same as bmControls.
+ * ----------------------------------------------------------
+ * 23+p+n*2 bReserved 1 Boolean
+ * ----------------------------------------------------------
+ * 24+p+n*2 iExtension 1 Index
+ * Index of a string descriptor that describes this
+ * extension unit.
+ * ----------------------------------------------------------
+ */
+ p = buflen >= 22 ? buffer[21] : 0;
+ n = buflen >= 25 + p ? buffer[22+p] : 0;
+
+ if (buflen < 25 + p + 2*n) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d EXTENSION_UNIT error\n",
+ udev->devnum, alts->desc.bInterfaceNumber);
+ break;
+ }
+
+ unit = kzalloc(sizeof *unit + p + 2*n, GFP_KERNEL);
+ if (unit == NULL)
+ return -ENOMEM;
+
+ unit->id = buffer[3];
+ unit->type = VC_EXTENSION_UNIT;
+ memcpy(unit->extension.guidExtensionCode, &buffer[4], 16);
+ unit->extension.bNumControls = buffer[20];
+ unit->extension.bNrInPins =
+ le16_to_cpup((__le16 *)&buffer[21]);
+ unit->extension.baSourceID = (__u8 *)unit + sizeof *unit;
+ memcpy(unit->extension.baSourceID, &buffer[22], p);
+ unit->extension.bControlSize = buffer[22+p];
+ unit->extension.bmControls = (__u8 *)unit + sizeof *unit + p;
+ unit->extension.bmControlsType = (__u8 *)unit + sizeof *unit
+ + p + n;
+ memcpy(unit->extension.bmControls, &buffer[23+p], 2*n);
+
+ if (buffer[24+p+2*n] != 0)
+ usb_string(udev, buffer[24+p+2*n], unit->name,
+ sizeof unit->name);
+ else
+ sprintf(unit->name, "Extension %u", buffer[3]);
+
+ list_add_tail(&unit->list, &dev->entities);
+ handled = 1;
+ break;
+ }
+
+ return handled;
+}
+
+static int uvc_parse_standard_control(struct uvc_device *dev,
+ const unsigned char *buffer, int buflen)
+{
+ struct usb_device *udev = dev->udev;
+ struct uvc_entity *unit, *term;
+ struct usb_interface *intf;
+ struct usb_host_interface *alts = dev->intf->cur_altsetting;
+ unsigned int i, n, p, len;
+ __u16 type;
+
+ switch (buffer[2]) {
+ case VC_HEADER:
+ n = buflen >= 12 ? buffer[11] : 0;
+
+ if (buflen < 12 || buflen < 12 + n) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d HEADER error\n", udev->devnum,
+ alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ dev->uvc_version = le16_to_cpup((__le16 *)&buffer[3]);
+ dev->clock_frequency = le32_to_cpup((__le32 *)&buffer[7]);
+
+ /* Parse all USB Video Streaming interfaces. */
+ for (i = 0; i < n; ++i) {
+ intf = usb_ifnum_to_if(udev, buffer[12+i]);
+ if (intf == NULL) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d "
+ "interface %d doesn't exists\n",
+ udev->devnum, i);
+ continue;
+ }
+
+ uvc_parse_streaming(dev, intf);
+ }
+ break;
+
+ case VC_INPUT_TERMINAL:
+ if (buflen < 8) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d INPUT_TERMINAL error\n",
+ udev->devnum, alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ /* Make sure the terminal type MSB is not null, otherwise it
+ * could be confused with a unit.
+ */
+ type = le16_to_cpup((__le16 *)&buffer[4]);
+ if ((type & 0xff00) == 0) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d INPUT_TERMINAL %d has invalid "
+ "type 0x%04x, skipping\n", udev->devnum,
+ alts->desc.bInterfaceNumber,
+ buffer[3], type);
+ return 0;
+ }
+
+ n = 0;
+ p = 0;
+ len = 8;
+
+ if (type == ITT_CAMERA) {
+ n = buflen >= 15 ? buffer[14] : 0;
+ len = 15;
+
+ } else if (type == ITT_MEDIA_TRANSPORT_INPUT) {
+ n = buflen >= 9 ? buffer[8] : 0;
+ p = buflen >= 10 + n ? buffer[9+n] : 0;
+ len = 10;
+ }
+
+ if (buflen < len + n + p) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d INPUT_TERMINAL error\n",
+ udev->devnum, alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ term = kzalloc(sizeof *term + n + p, GFP_KERNEL);
+ if (term == NULL)
+ return -ENOMEM;
+
+ term->id = buffer[3];
+ term->type = type | UVC_TERM_INPUT;
+
+ if (UVC_ENTITY_TYPE(term) == ITT_CAMERA) {
+ term->camera.bControlSize = n;
+ term->camera.bmControls = (__u8 *)term + sizeof *term;
+ term->camera.wObjectiveFocalLengthMin =
+ le16_to_cpup((__le16 *)&buffer[8]);
+ term->camera.wObjectiveFocalLengthMax =
+ le16_to_cpup((__le16 *)&buffer[10]);
+ term->camera.wOcularFocalLength =
+ le16_to_cpup((__le16 *)&buffer[12]);
+ memcpy(term->camera.bmControls, &buffer[15], n);
+ } else if (UVC_ENTITY_TYPE(term) == ITT_MEDIA_TRANSPORT_INPUT) {
+ term->media.bControlSize = n;
+ term->media.bmControls = (__u8 *)term + sizeof *term;
+ term->media.bTransportModeSize = p;
+ term->media.bmTransportModes = (__u8 *)term
+ + sizeof *term + n;
+ memcpy(term->media.bmControls, &buffer[9], n);
+ memcpy(term->media.bmTransportModes, &buffer[10+n], p);
+ }
+
+ if (buffer[7] != 0)
+ usb_string(udev, buffer[7], term->name,
+ sizeof term->name);
+ else if (UVC_ENTITY_TYPE(term) == ITT_CAMERA)
+ sprintf(term->name, "Camera %u", buffer[3]);
+ else if (UVC_ENTITY_TYPE(term) == ITT_MEDIA_TRANSPORT_INPUT)
+ sprintf(term->name, "Media %u", buffer[3]);
+ else
+ sprintf(term->name, "Input %u", buffer[3]);
+
+ list_add_tail(&term->list, &dev->entities);
+ break;
+
+ case VC_OUTPUT_TERMINAL:
+ if (buflen < 9) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d OUTPUT_TERMINAL error\n",
+ udev->devnum, alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ /* Make sure the terminal type MSB is not null, otherwise it
+ * could be confused with a unit.
+ */
+ type = le16_to_cpup((__le16 *)&buffer[4]);
+ if ((type & 0xff00) == 0) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d OUTPUT_TERMINAL %d has invalid "
+ "type 0x%04x, skipping\n", udev->devnum,
+ alts->desc.bInterfaceNumber, buffer[3], type);
+ return 0;
+ }
+
+ term = kzalloc(sizeof *term, GFP_KERNEL);
+ if (term == NULL)
+ return -ENOMEM;
+
+ term->id = buffer[3];
+ term->type = type | UVC_TERM_OUTPUT;
+ term->output.bSourceID = buffer[7];
+
+ if (buffer[8] != 0)
+ usb_string(udev, buffer[8], term->name,
+ sizeof term->name);
+ else
+ sprintf(term->name, "Output %u", buffer[3]);
+
+ list_add_tail(&term->list, &dev->entities);
+ break;
+
+ case VC_SELECTOR_UNIT:
+ p = buflen >= 5 ? buffer[4] : 0;
+
+ if (buflen < 5 || buflen < 6 + p) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d SELECTOR_UNIT error\n",
+ udev->devnum, alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ unit = kzalloc(sizeof *unit + p, GFP_KERNEL);
+ if (unit == NULL)
+ return -ENOMEM;
+
+ unit->id = buffer[3];
+ unit->type = buffer[2];
+ unit->selector.bNrInPins = buffer[4];
+ unit->selector.baSourceID = (__u8 *)unit + sizeof *unit;
+ memcpy(unit->selector.baSourceID, &buffer[5], p);
+
+ if (buffer[5+p] != 0)
+ usb_string(udev, buffer[5+p], unit->name,
+ sizeof unit->name);
+ else
+ sprintf(unit->name, "Selector %u", buffer[3]);
+
+ list_add_tail(&unit->list, &dev->entities);
+ break;
+
+ case VC_PROCESSING_UNIT:
+ n = buflen >= 8 ? buffer[7] : 0;
+ p = dev->uvc_version >= 0x0110 ? 10 : 9;
+
+ if (buflen < p + n) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d PROCESSING_UNIT error\n",
+ udev->devnum, alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ unit = kzalloc(sizeof *unit + n, GFP_KERNEL);
+ if (unit == NULL)
+ return -ENOMEM;
+
+ unit->id = buffer[3];
+ unit->type = buffer[2];
+ unit->processing.bSourceID = buffer[4];
+ unit->processing.wMaxMultiplier =
+ le16_to_cpup((__le16 *)&buffer[5]);
+ unit->processing.bControlSize = buffer[7];
+ unit->processing.bmControls = (__u8 *)unit + sizeof *unit;
+ memcpy(unit->processing.bmControls, &buffer[8], n);
+ if (dev->uvc_version >= 0x0110)
+ unit->processing.bmVideoStandards = buffer[9+n];
+
+ if (buffer[8+n] != 0)
+ usb_string(udev, buffer[8+n], unit->name,
+ sizeof unit->name);
+ else
+ sprintf(unit->name, "Processing %u", buffer[3]);
+
+ list_add_tail(&unit->list, &dev->entities);
+ break;
+
+ case VC_EXTENSION_UNIT:
+ p = buflen >= 22 ? buffer[21] : 0;
+ n = buflen >= 24 + p ? buffer[22+p] : 0;
+
+ if (buflen < 24 + p + n) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d EXTENSION_UNIT error\n",
+ udev->devnum, alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ unit = kzalloc(sizeof *unit + p + n, GFP_KERNEL);
+ if (unit == NULL)
+ return -ENOMEM;
+
+ unit->id = buffer[3];
+ unit->type = buffer[2];
+ memcpy(unit->extension.guidExtensionCode, &buffer[4], 16);
+ unit->extension.bNumControls = buffer[20];
+ unit->extension.bNrInPins =
+ le16_to_cpup((__le16 *)&buffer[21]);
+ unit->extension.baSourceID = (__u8 *)unit + sizeof *unit;
+ memcpy(unit->extension.baSourceID, &buffer[22], p);
+ unit->extension.bControlSize = buffer[22+p];
+ unit->extension.bmControls = (__u8 *)unit + sizeof *unit + p;
+ memcpy(unit->extension.bmControls, &buffer[23+p], n);
+
+ if (buffer[23+p+n] != 0)
+ usb_string(udev, buffer[23+p+n], unit->name,
+ sizeof unit->name);
+ else
+ sprintf(unit->name, "Extension %u", buffer[3]);
+
+ list_add_tail(&unit->list, &dev->entities);
+ break;
+
+ default:
+ uvc_trace(UVC_TRACE_DESCR, "Found an unknown CS_INTERFACE "
+ "descriptor (%u)\n", buffer[2]);
+ break;
+ }
+
+ return 0;
+}
+
+static int uvc_parse_control(struct uvc_device *dev)
+{
+ struct usb_host_interface *alts = dev->intf->cur_altsetting;
+ unsigned char *buffer = alts->extra;
+ int buflen = alts->extralen;
+ int ret;
+
+ /* Parse the default alternate setting only, as the UVC specification
+ * defines a single alternate setting, the default alternate setting
+ * zero.
+ */
+
+ while (buflen > 2) {
+ if (uvc_parse_vendor_control(dev, buffer, buflen) ||
+ buffer[1] != USB_DT_CS_INTERFACE)
+ goto next_descriptor;
+
+ if ((ret = uvc_parse_standard_control(dev, buffer, buflen)) < 0)
+ return ret;
+
+next_descriptor:
+ buflen -= buffer[0];
+ buffer += buffer[0];
+ }
+
+ /* Check if the optional status endpoint is present. */
+ if (alts->desc.bNumEndpoints == 1) {
+ struct usb_host_endpoint *ep = &alts->endpoint[0];
+ struct usb_endpoint_descriptor *desc = &ep->desc;
+
+ if (usb_endpoint_is_int_in(desc) &&
+ le16_to_cpu(desc->wMaxPacketSize) >= 8 &&
+ desc->bInterval != 0) {
+ uvc_trace(UVC_TRACE_DESCR, "Found a Status endpoint "
+ "(addr %02x).\n", desc->bEndpointAddress);
+ dev->int_ep = ep;
+ }
+ }
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------
+ * USB probe and disconnect
+ */
+
+/*
+ * Unregister the video devices.
+ */
+static void uvc_unregister_video(struct uvc_device *dev)
+{
+ if (dev->video.vdev) {
+ if (dev->video.vdev->minor == -1)
+ video_device_release(dev->video.vdev);
+ else
+ video_unregister_device(dev->video.vdev);
+ dev->video.vdev = NULL;
+ }
+}
+
+/*
+ * Scan the UVC descriptors to locate a chain starting at an Output Terminal
+ * and containing the following units:
+ *
+ * - a USB Streaming Output Terminal
+ * - zero or one Processing Unit
+ * - zero, one or mode single-input Selector Units
+ * - zero or one multiple-input Selector Units, provided all inputs are
+ * connected to input terminals
+ * - zero, one or mode single-input Extension Units
+ * - one Camera Input Terminal, or one or more External terminals.
+ *
+ * A side forward scan is made on each detected entity to check for additional
+ * extension units.
+ */
+static int uvc_scan_chain_entity(struct uvc_video_device *video,
+ struct uvc_entity *entity)
+{
+ switch (UVC_ENTITY_TYPE(entity)) {
+ case VC_EXTENSION_UNIT:
+ if (uvc_trace_param & UVC_TRACE_PROBE)
+ printk(" <- XU %d", entity->id);
+
+ if (entity->extension.bNrInPins != 1) {
+ uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has more "
+ "than 1 input pin.\n", entity->id);
+ return -1;
+ }
+
+ list_add_tail(&entity->chain, &video->extensions);
+ break;
+
+ case VC_PROCESSING_UNIT:
+ if (uvc_trace_param & UVC_TRACE_PROBE)
+ printk(" <- PU %d", entity->id);
+
+ if (video->processing != NULL) {
+ uvc_trace(UVC_TRACE_DESCR, "Found multiple "
+ "Processing Units in chain.\n");
+ return -1;
+ }
+
+ video->processing = entity;
+ break;
+
+ case VC_SELECTOR_UNIT:
+ if (uvc_trace_param & UVC_TRACE_PROBE)
+ printk(" <- SU %d", entity->id);
+
+ /* Single-input selector units are ignored. */
+ if (entity->selector.bNrInPins == 1)
+ break;
+
+ if (video->selector != NULL) {
+ uvc_trace(UVC_TRACE_DESCR, "Found multiple Selector "
+ "Units in chain.\n");
+ return -1;
+ }
+
+ video->selector = entity;
+ break;
+
+ case ITT_VENDOR_SPECIFIC:
+ case ITT_CAMERA:
+ case ITT_MEDIA_TRANSPORT_INPUT:
+ if (uvc_trace_param & UVC_TRACE_PROBE)
+ printk(" <- IT %d\n", entity->id);
+
+ list_add_tail(&entity->chain, &video->iterms);
+ break;
+
+ default:
+ uvc_trace(UVC_TRACE_DESCR, "Unsupported entity type "
+ "0x%04x found in chain.\n", UVC_ENTITY_TYPE(entity));
+ return -1;
+ }
+
+ return 0;
+}
+
+static int uvc_scan_chain_forward(struct uvc_video_device *video,
+ struct uvc_entity *entity, struct uvc_entity *prev)
+{
+ struct uvc_entity *forward;
+ int found;
+
+ /* Forward scan */
+ forward = NULL;
+ found = 0;
+
+ while (1) {
+ forward = uvc_entity_by_reference(video->dev, entity->id,
+ forward);
+ if (forward == NULL)
+ break;
+
+ if (UVC_ENTITY_TYPE(forward) != VC_EXTENSION_UNIT ||
+ forward == prev)
+ continue;
+
+ if (forward->extension.bNrInPins != 1) {
+ uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has"
+ "more than 1 input pin.\n", entity->id);
+ return -1;
+ }
+
+ list_add_tail(&forward->chain, &video->extensions);
+ if (uvc_trace_param & UVC_TRACE_PROBE) {
+ if (!found)
+ printk(" (-> XU");
+
+ printk(" %d", forward->id);
+ found = 1;
+ }
+ }
+ if (found)
+ printk(")");
+
+ return 0;
+}
+
+static int uvc_scan_chain_backward(struct uvc_video_device *video,
+ struct uvc_entity *entity)
+{
+ struct uvc_entity *term;
+ int id = -1, i;
+
+ switch (UVC_ENTITY_TYPE(entity)) {
+ case VC_EXTENSION_UNIT:
+ id = entity->extension.baSourceID[0];
+ break;
+
+ case VC_PROCESSING_UNIT:
+ id = entity->processing.bSourceID;
+ break;
+
+ case VC_SELECTOR_UNIT:
+ /* Single-input selector units are ignored. */
+ if (entity->selector.bNrInPins == 1) {
+ id = entity->selector.baSourceID[0];
+ break;
+ }
+
+ if (uvc_trace_param & UVC_TRACE_PROBE)
+ printk(" <- IT");
+
+ video->selector = entity;
+ for (i = 0; i < entity->selector.bNrInPins; ++i) {
+ id = entity->selector.baSourceID[i];
+ term = uvc_entity_by_id(video->dev, id);
+ if (term == NULL || !UVC_ENTITY_IS_ITERM(term)) {
+ uvc_trace(UVC_TRACE_DESCR, "Selector unit %d "
+ "input %d isn't connected to an "
+ "input terminal\n", entity->id, i);
+ return -1;
+ }
+
+ if (uvc_trace_param & UVC_TRACE_PROBE)
+ printk(" %d", term->id);
+
+ list_add_tail(&term->chain, &video->iterms);
+ uvc_scan_chain_forward(video, term, entity);
+ }
+
+ if (uvc_trace_param & UVC_TRACE_PROBE)
+ printk("\n");
+
+ id = 0;
+ break;
+ }
+
+ return id;
+}
+
+static int uvc_scan_chain(struct uvc_video_device *video)
+{
+ struct uvc_entity *entity, *prev;
+ int id;
+
+ entity = video->oterm;
+ uvc_trace(UVC_TRACE_PROBE, "Scanning UVC chain: OT %d", entity->id);
+ id = entity->output.bSourceID;
+ while (id != 0) {
+ prev = entity;
+ entity = uvc_entity_by_id(video->dev, id);
+ if (entity == NULL) {
+ uvc_trace(UVC_TRACE_DESCR, "Found reference to "
+ "unknown entity %d.\n", id);
+ return -1;
+ }
+
+ /* Process entity */
+ if (uvc_scan_chain_entity(video, entity) < 0)
+ return -1;
+
+ /* Forward scan */
+ if (uvc_scan_chain_forward(video, entity, prev) < 0)
+ return -1;
+
+ /* Stop when a terminal is found. */
+ if (!UVC_ENTITY_IS_UNIT(entity))
+ break;
+
+ /* Backward scan */
+ id = uvc_scan_chain_backward(video, entity);
+ if (id < 0)
+ return id;
+ }
+
+ /* Initialize the video buffers queue. */
+ uvc_queue_init(&video->queue);
+
+ return 0;
+}
+
+/*
+ * Register the video devices.
+ *
+ * The driver currently supports a single video device per control interface
+ * only. The terminal and units must match the following structure:
+ *
+ * ITT_CAMERA -> VC_PROCESSING_UNIT -> VC_EXTENSION_UNIT{0,n} -> TT_STREAMING
+ *
+ * The Extension Units, if present, must have a single input pin. The
+ * Processing Unit and Extension Units can be in any order. Additional
+ * Extension Units connected to the main chain as single-unit branches are
+ * also supported.
+ */
+static int uvc_register_video(struct uvc_device *dev)
+{
+ struct video_device *vdev;
+ struct uvc_entity *term;
+ int found = 0, ret;
+
+ /* Check if the control interface matches the structure we expect. */
+ list_for_each_entry(term, &dev->entities, list) {
+ struct uvc_streaming *streaming;
+
+ if (UVC_ENTITY_TYPE(term) != TT_STREAMING)
+ continue;
+
+ memset(&dev->video, 0, sizeof dev->video);
+ mutex_init(&dev->video.ctrl_mutex);
+ INIT_LIST_HEAD(&dev->video.iterms);
+ INIT_LIST_HEAD(&dev->video.extensions);
+ dev->video.oterm = term;
+ dev->video.dev = dev;
+ if (uvc_scan_chain(&dev->video) < 0)
+ continue;
+
+ list_for_each_entry(streaming, &dev->streaming, list) {
+ if (streaming->header.bTerminalLink == term->id) {
+ dev->video.streaming = streaming;
+ found = 1;
+ break;
+ }
+ }
+
+ if (found)
+ break;
+ }
+
+ if (!found) {
+ uvc_printk(KERN_INFO, "No valid video chain found.\n");
+ return -1;
+ }
+
+ if (uvc_trace_param & UVC_TRACE_PROBE) {
+ uvc_printk(KERN_INFO, "Found a valid video chain (");
+ list_for_each_entry(term, &dev->video.iterms, chain) {
+ printk("%d", term->id);
+ if (term->chain.next != &dev->video.iterms)
+ printk(",");
+ }
+ printk(" -> %d).\n", dev->video.oterm->id);
+ }
+
+ /* Initialize the streaming interface with default streaming
+ * parameters.
+ */
+ if ((ret = uvc_video_init(&dev->video)) < 0) {
+ uvc_printk(KERN_ERR, "Failed to initialize the device "
+ "(%d).\n", ret);
+ return ret;
+ }
+
+ /* Register the device with V4L. */
+ vdev = video_device_alloc();
+ if (vdev == NULL)
+ return -1;
+
+ /* We already hold a reference to dev->udev. The video device will be
+ * unregistered before the reference is released, so we don't need to
+ * get another one.
+ */
+ vdev->dev = &dev->intf->dev;
+ vdev->type = 0;
+ vdev->type2 = 0;
+ vdev->minor = -1;
+ vdev->fops = &uvc_fops;
+ vdev->release = video_device_release;
+ strncpy(vdev->name, dev->name, sizeof vdev->name);
+
+ /* Set the driver data before calling video_register_device, otherwise
+ * uvc_v4l2_open might race us.
+ *
+ * FIXME: usb_set_intfdata hasn't been called so far. Is that a
+ * problem ? Does any function which could be called here get
+ * a pointer to the usb_interface ?
+ */
+ dev->video.vdev = vdev;
+ video_set_drvdata(vdev, &dev->video);
+
+ if (video_register_device(vdev, VFL_TYPE_GRABBER, -1) < 0) {
+ dev->video.vdev = NULL;
+ video_device_release(vdev);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Delete the UVC device.
+ *
+ * Called by the kernel when the last reference to the uvc_device structure
+ * is released.
+ *
+ * Unregistering the video devices is done here because every opened instance
+ * must be closed before the device can be unregistered. An alternative would
+ * have been to use another reference count for uvc_v4l2_open/uvc_release, and
+ * unregister the video devices on disconnect when that reference count drops
+ * to zero.
+ *
+ * As this function is called after or during disconnect(), all URBs have
+ * already been canceled by the USB core. There is no need to kill the
+ * interrupt URB manually.
+ */
+void uvc_delete(struct kref *kref)
+{
+ struct uvc_device *dev = container_of(kref, struct uvc_device, kref);
+ struct list_head *p, *n;
+
+ /* Unregister the video device */
+ uvc_unregister_video(dev);
+ usb_put_intf(dev->intf);
+ usb_put_dev(dev->udev);
+
+ uvc_status_cleanup(dev);
+ uvc_ctrl_cleanup_device(dev);
+
+ list_for_each_safe(p, n, &dev->entities) {
+ struct uvc_entity *entity;
+ entity = list_entry(p, struct uvc_entity, list);
+ kfree(entity);
+ }
+
+ list_for_each_safe(p, n, &dev->streaming) {
+ struct uvc_streaming *streaming;
+ streaming = list_entry(p, struct uvc_streaming, list);
+ usb_driver_release_interface(&uvc_driver.driver,
+ streaming->intf);
+ usb_put_intf(streaming->intf);
+ kfree(streaming->format);
+ kfree(streaming->header.bmaControls);
+ kfree(streaming);
+ }
+
+ kfree(dev);
+}
+
+static int uvc_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct uvc_device *dev;
+ int ret;
+
+ if (id->idVendor && id->idProduct)
+ uvc_trace(UVC_TRACE_PROBE, "Probing known UVC device %s "
+ "(%04x:%04x)\n", udev->devpath, id->idVendor,
+ id->idProduct);
+ else
+ uvc_trace(UVC_TRACE_PROBE, "Probing generic UVC device %s\n",
+ udev->devpath);
+
+ /* Allocate memory for the device and initialize it */
+ if ((dev = kzalloc(sizeof *dev, GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&dev->entities);
+ INIT_LIST_HEAD(&dev->streaming);
+ kref_init(&dev->kref);
+
+ dev->udev = usb_get_dev(udev);
+ dev->intf = usb_get_intf(intf);
+ dev->intfnum = intf->cur_altsetting->desc.bInterfaceNumber;
+ dev->quirks = id->driver_info | uvc_quirks_param;
+
+ if (udev->product != NULL)
+ strncpy(dev->name, udev->product, sizeof dev->name);
+ else
+ snprintf(dev->name, sizeof dev->name,
+ "UVC Camera (%04x:%04x)",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ /* Parse the Video Class control descriptor */
+ if (uvc_parse_control(dev) < 0) {
+ uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC "
+ "descriptors.\n");
+ goto error;
+ }
+
+ uvc_printk(KERN_INFO, "Found UVC %u.%02u device %s (%04x:%04x)\n",
+ dev->uvc_version >> 8, dev->uvc_version & 0xff,
+ udev->product ? udev->product : "<unnamed>",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ if (uvc_quirks_param != 0) {
+ uvc_printk(KERN_INFO, "Forcing device quirks 0x%x by module "
+ "parameter for testing purpose.\n", uvc_quirks_param);
+ uvc_printk(KERN_INFO, "Please report required quirks to the "
+ "linux-uvc-devel mailing list.\n");
+ }
+
+ /* Initialize controls */
+ if (uvc_ctrl_init_device(dev) < 0)
+ goto error;
+
+ /* Register the video devices */
+ if (uvc_register_video(dev) < 0)
+ goto error;
+
+ /* Save our data pointer in the interface data */
+ usb_set_intfdata(intf, dev);
+
+ /* Initialize the interrupt URB */
+ if ((ret = uvc_status_init(dev)) < 0) {
+ uvc_printk(KERN_INFO, "Unable to initialize the status "
+ "endpoint (%d), status interrupt will not be "
+ "supported.\n", ret);
+ }
+
+ uvc_trace(UVC_TRACE_PROBE, "UVC device initialized.\n");
+ return 0;
+
+error:
+ kref_put(&dev->kref, uvc_delete);
+ return -ENODEV;
+}
+
+static void uvc_disconnect(struct usb_interface *intf)
+{
+ struct uvc_device *dev = usb_get_intfdata(intf);
+
+ /* Set the USB interface data to NULL. This can be done outside the
+ * lock, as there's no other reader.
+ */
+ usb_set_intfdata(intf, NULL);
+
+ if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOSTREAMING)
+ return;
+
+ /* uvc_v4l2_open() might race uvc_disconnect(). A static driver-wide
+ * lock is needed to prevent uvc_disconnect from releasing its
+ * reference to the uvc_device instance after uvc_v4l2_open() received
+ * the pointer to the device (video_devdata) but before it got the
+ * chance to increase the reference count (kref_get).
+ */
+ mutex_lock(&uvc_driver.open_mutex);
+
+ dev->state |= UVC_DEV_DISCONNECTED;
+ kref_put(&dev->kref, uvc_delete);
+
+ mutex_unlock(&uvc_driver.open_mutex);
+}
+
+static int uvc_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct uvc_device *dev = usb_get_intfdata(intf);
+
+ uvc_trace(UVC_TRACE_SUSPEND, "Suspending interface %u\n",
+ intf->cur_altsetting->desc.bInterfaceNumber);
+
+ /* Controls are cached on the fly so they don't need to be saved. */
+ if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL)
+ return uvc_status_suspend(dev);
+
+ if (dev->video.streaming->intf != intf) {
+ uvc_trace(UVC_TRACE_SUSPEND, "Suspend: video streaming USB "
+ "interface mismatch.\n");
+ return -EINVAL;
+ }
+
+ return uvc_video_suspend(&dev->video);
+}
+
+static int uvc_resume(struct usb_interface *intf)
+{
+ struct uvc_device *dev = usb_get_intfdata(intf);
+ int ret;
+
+ uvc_trace(UVC_TRACE_SUSPEND, "Resuming interface %u\n",
+ intf->cur_altsetting->desc.bInterfaceNumber);
+
+ if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) {
+ if ((ret = uvc_ctrl_resume_device(dev)) < 0)
+ return ret;
+
+ return uvc_status_resume(dev);
+ }
+
+ if (dev->video.streaming->intf != intf) {
+ uvc_trace(UVC_TRACE_SUSPEND, "Resume: video streaming USB "
+ "interface mismatch.\n");
+ return -EINVAL;
+ }
+
+ return uvc_video_resume(&dev->video);
+}
+
+/* ------------------------------------------------------------------------
+ * Driver initialization and cleanup
+ */
+
+/*
+ * The Logitech cameras listed below have their interface class set to
+ * VENDOR_SPEC because they don't announce themselves as UVC devices, even
+ * though they are compliant.
+ */
+static struct usb_device_id uvc_ids[] = {
+ /* ALi M5606 (Clevo M540SR) */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x0402,
+ .idProduct = 0x5606,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Creative Live! Optia */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x041e,
+ .idProduct = 0x4057,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Microsoft Lifecam NX-6000 */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x045e,
+ .idProduct = 0x00f8,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Microsoft Lifecam VX-7000 */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x045e,
+ .idProduct = 0x0723,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Logitech Quickcam Fusion */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x046d,
+ .idProduct = 0x08c1,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0 },
+ /* Logitech Quickcam Orbit MP */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x046d,
+ .idProduct = 0x08c2,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0 },
+ /* Logitech Quickcam Pro for Notebook */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x046d,
+ .idProduct = 0x08c3,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0 },
+ /* Logitech Quickcam Pro 5000 */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x046d,
+ .idProduct = 0x08c5,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0 },
+ /* Logitech Quickcam OEM Dell Notebook */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x046d,
+ .idProduct = 0x08c6,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0 },
+ /* Logitech Quickcam OEM Cisco VT Camera II */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x046d,
+ .idProduct = 0x08c7,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0 },
+ /* Apple Built-In iSight */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x05ac,
+ .idProduct = 0x8501,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX
+ | UVC_QUIRK_BUILTIN_ISIGHT },
+ /* Genesys Logic USB 2.0 PC Camera */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x05e3,
+ .idProduct = 0x0505,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_STREAM_NO_FID },
+ /* Silicon Motion SM371 */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x090c,
+ .idProduct = 0xb371,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* MT6227 */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x0e8d,
+ .idProduct = 0x0004,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Syntek (HP Spartan) */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x174f,
+ .idProduct = 0x5212,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_STREAM_NO_FID },
+ /* Syntek (Asus U3S) */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x174f,
+ .idProduct = 0x8a33,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_STREAM_NO_FID },
+ /* Ecamm Pico iMage */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x18cd,
+ .idProduct = 0xcafe,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_EXTRAFIELDS },
+ /* Bodelin ProScopeHR */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_DEV_HI
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x19ab,
+ .idProduct = 0x1000,
+ .bcdDevice_hi = 0x0126,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_STATUS_INTERVAL },
+ /* SiGma Micro USB Web Camera */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x1c4f,
+ .idProduct = 0x3000,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX
+ | UVC_QUIRK_IGNORE_SELECTOR_UNIT},
+ /* Acer OEM Webcam - Unknown vendor */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x5986,
+ .idProduct = 0x0100,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Packard Bell OEM Webcam */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x5986,
+ .idProduct = 0x0101,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Acer Crystal Eye webcam */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x5986,
+ .idProduct = 0x0102,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Acer OrbiCam - Unknown vendor */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x5986,
+ .idProduct = 0x0200,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Generic USB Video Class */
+ { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) },
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, uvc_ids);
+
+struct uvc_driver uvc_driver = {
+ .driver = {
+ .name = "uvcvideo",
+ .probe = uvc_probe,
+ .disconnect = uvc_disconnect,
+ .suspend = uvc_suspend,
+ .resume = uvc_resume,
+ .id_table = uvc_ids,
+ .supports_autosuspend = 1,
+ },
+};
+
+static int __init uvc_init(void)
+{
+ int result;
+
+ INIT_LIST_HEAD(&uvc_driver.devices);
+ INIT_LIST_HEAD(&uvc_driver.controls);
+ mutex_init(&uvc_driver.open_mutex);
+ mutex_init(&uvc_driver.ctrl_mutex);
+
+ uvc_ctrl_init();
+
+ result = usb_register(&uvc_driver.driver);
+ if (result == 0)
+ printk(KERN_INFO DRIVER_DESC " (" DRIVER_VERSION ")\n");
+ return result;
+}
+
+static void __exit uvc_cleanup(void)
+{
+ usb_deregister(&uvc_driver.driver);
+}
+
+module_init(uvc_init);
+module_exit(uvc_cleanup);
+
+module_param_named(quirks, uvc_quirks_param, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(quirks, "Forced device quirks");
+module_param_named(trace, uvc_trace_param, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(trace, "Trace level bitmask");
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/media/video/uvc/uvc_isight.c b/drivers/media/video/uvc/uvc_isight.c
new file mode 100644
index 0000000..37bdefd
--- /dev/null
+++ b/drivers/media/video/uvc/uvc_isight.c
@@ -0,0 +1,134 @@
+/*
+ * uvc_isight.c -- USB Video Class driver - iSight support
+ *
+ * Copyright (C) 2006-2007
+ * Ivan N. Zlatev <contact@i-nz.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/usb.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+
+#include "uvcvideo.h"
+
+/* Built-in iSight webcams implements most of UVC 1.0 except a
+ * different packet format. Instead of sending a header at the
+ * beginning of each isochronous transfer payload, the webcam sends a
+ * single header per image (on its own in a packet), followed by
+ * packets containing data only.
+ *
+ * Offset Size (bytes) Description
+ * ------------------------------------------------------------------
+ * 0x00 1 Header length
+ * 0x01 1 Flags (UVC-compliant)
+ * 0x02 4 Always equal to '11223344'
+ * 0x06 8 Always equal to 'deadbeefdeadface'
+ * 0x0e 16 Unknown
+ *
+ * The header can be prefixed by an optional, unknown-purpose byte.
+ */
+
+static int isight_decode(struct uvc_video_queue *queue, struct uvc_buffer *buf,
+ const __u8 *data, unsigned int len)
+{
+ static const __u8 hdr[] = {
+ 0x11, 0x22, 0x33, 0x44,
+ 0xde, 0xad, 0xbe, 0xef,
+ 0xde, 0xad, 0xfa, 0xce
+ };
+
+ unsigned int maxlen, nbytes;
+ __u8 *mem;
+ int is_header = 0;
+
+ if (buf == NULL)
+ return 0;
+
+ if ((len >= 14 && memcmp(&data[2], hdr, 12) == 0) ||
+ (len >= 15 && memcmp(&data[3], hdr, 12) == 0)) {
+ uvc_trace(UVC_TRACE_FRAME, "iSight header found\n");
+ is_header = 1;
+ }
+
+ /* Synchronize to the input stream by waiting for a header packet. */
+ if (buf->state != UVC_BUF_STATE_ACTIVE) {
+ if (!is_header) {
+ uvc_trace(UVC_TRACE_FRAME, "Dropping packet (out of "
+ "sync).\n");
+ return 0;
+ }
+
+ buf->state = UVC_BUF_STATE_ACTIVE;
+ }
+
+ /* Mark the buffer as done if we're at the beginning of a new frame.
+ *
+ * Empty buffers (bytesused == 0) don't trigger end of frame detection
+ * as it doesn't make sense to return an empty buffer.
+ */
+ if (is_header && buf->buf.bytesused != 0) {
+ buf->state = UVC_BUF_STATE_DONE;
+ return -EAGAIN;
+ }
+
+ /* Copy the video data to the buffer. Skip header packets, as they
+ * contain no data.
+ */
+ if (!is_header) {
+ maxlen = buf->buf.length - buf->buf.bytesused;
+ mem = queue->mem + buf->buf.m.offset + buf->buf.bytesused;
+ nbytes = min(len, maxlen);
+ memcpy(mem, data, nbytes);
+ buf->buf.bytesused += nbytes;
+
+ if (len > maxlen || buf->buf.bytesused == buf->buf.length) {
+ uvc_trace(UVC_TRACE_FRAME, "Frame complete "
+ "(overflow).\n");
+ buf->state = UVC_BUF_STATE_DONE;
+ }
+ }
+
+ return 0;
+}
+
+void uvc_video_decode_isight(struct urb *urb, struct uvc_video_device *video,
+ struct uvc_buffer *buf)
+{
+ int ret, i;
+
+ for (i = 0; i < urb->number_of_packets; ++i) {
+ if (urb->iso_frame_desc[i].status < 0) {
+ uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame "
+ "lost (%d).\n",
+ urb->iso_frame_desc[i].status);
+ }
+
+ /* Decode the payload packet.
+ * uvc_video_decode is entered twice when a frame transition
+ * has been detected because the end of frame can only be
+ * reliably detected when the first packet of the new frame
+ * is processed. The first pass detects the transition and
+ * closes the previous frame's buffer, the second pass
+ * processes the data of the first payload of the new frame.
+ */
+ do {
+ ret = isight_decode(&video->queue, buf,
+ urb->transfer_buffer +
+ urb->iso_frame_desc[i].offset,
+ urb->iso_frame_desc[i].actual_length);
+
+ if (buf == NULL)
+ break;
+
+ if (buf->state == UVC_BUF_STATE_DONE ||
+ buf->state == UVC_BUF_STATE_ERROR)
+ buf = uvc_queue_next_buffer(&video->queue, buf);
+ } while (ret == -EAGAIN);
+ }
+}
diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c
new file mode 100644
index 0000000..0923f0e
--- /dev/null
+++ b/drivers/media/video/uvc/uvc_queue.c
@@ -0,0 +1,477 @@
+/*
+ * uvc_queue.c -- USB Video Class driver - Buffers management
+ *
+ * Copyright (C) 2005-2008
+ * Laurent Pinchart (laurent.pinchart@skynet.be)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+#include <asm/atomic.h>
+
+#include "uvcvideo.h"
+
+/* ------------------------------------------------------------------------
+ * Video buffers queue management.
+ *
+ * Video queues is initialized by uvc_queue_init(). The function performs
+ * basic initialization of the uvc_video_queue struct and never fails.
+ *
+ * Video buffer allocation and freeing are performed by uvc_alloc_buffers and
+ * uvc_free_buffers respectively. The former acquires the video queue lock,
+ * while the later must be called with the lock held (so that allocation can
+ * free previously allocated buffers). Trying to free buffers that are mapped
+ * to user space will return -EBUSY.
+ *
+ * Video buffers are managed using two queues. However, unlike most USB video
+ * drivers which use an in queue and an out queue, we use a main queue which
+ * holds all queued buffers (both 'empty' and 'done' buffers), and an irq
+ * queue which holds empty buffers. This design (copied from video-buf)
+ * minimizes locking in interrupt, as only one queue is shared between
+ * interrupt and user contexts.
+ *
+ * Use cases
+ * ---------
+ *
+ * Unless stated otherwise, all operations which modify the irq buffers queue
+ * are protected by the irq spinlock.
+ *
+ * 1. The user queues the buffers, starts streaming and dequeues a buffer.
+ *
+ * The buffers are added to the main and irq queues. Both operations are
+ * protected by the queue lock, and the latert is protected by the irq
+ * spinlock as well.
+ *
+ * The completion handler fetches a buffer from the irq queue and fills it
+ * with video data. If no buffer is available (irq queue empty), the handler
+ * returns immediately.
+ *
+ * When the buffer is full, the completion handler removes it from the irq
+ * queue, marks it as ready (UVC_BUF_STATE_DONE) and wake its wait queue.
+ * At that point, any process waiting on the buffer will be woken up. If a
+ * process tries to dequeue a buffer after it has been marked ready, the
+ * dequeing will succeed immediately.
+ *
+ * 2. Buffers are queued, user is waiting on a buffer and the device gets
+ * disconnected.
+ *
+ * When the device is disconnected, the kernel calls the completion handler
+ * with an appropriate status code. The handler marks all buffers in the
+ * irq queue as being erroneous (UVC_BUF_STATE_ERROR) and wakes them up so
+ * that any process waiting on a buffer gets woken up.
+ *
+ * Waking up up the first buffer on the irq list is not enough, as the
+ * process waiting on the buffer might restart the dequeue operation
+ * immediately.
+ *
+ */
+
+void uvc_queue_init(struct uvc_video_queue *queue)
+{
+ mutex_init(&queue->mutex);
+ spin_lock_init(&queue->irqlock);
+ INIT_LIST_HEAD(&queue->mainqueue);
+ INIT_LIST_HEAD(&queue->irqqueue);
+}
+
+/*
+ * Allocate the video buffers.
+ *
+ * Pages are reserved to make sure they will not be swaped, as they will be
+ * filled in URB completion handler.
+ *
+ * Buffers will be individually mapped, so they must all be page aligned.
+ */
+int uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers,
+ unsigned int buflength)
+{
+ unsigned int bufsize = PAGE_ALIGN(buflength);
+ unsigned int i;
+ void *mem = NULL;
+ int ret;
+
+ if (nbuffers > UVC_MAX_VIDEO_BUFFERS)
+ nbuffers = UVC_MAX_VIDEO_BUFFERS;
+
+ mutex_lock(&queue->mutex);
+
+ if ((ret = uvc_free_buffers(queue)) < 0)
+ goto done;
+
+ /* Bail out if no buffers should be allocated. */
+ if (nbuffers == 0)
+ goto done;
+
+ /* Decrement the number of buffers until allocation succeeds. */
+ for (; nbuffers > 0; --nbuffers) {
+ mem = vmalloc_32(nbuffers * bufsize);
+ if (mem != NULL)
+ break;
+ }
+
+ if (mem == NULL) {
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ for (i = 0; i < nbuffers; ++i) {
+ memset(&queue->buffer[i], 0, sizeof queue->buffer[i]);
+ queue->buffer[i].buf.index = i;
+ queue->buffer[i].buf.m.offset = i * bufsize;
+ queue->buffer[i].buf.length = buflength;
+ queue->buffer[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ queue->buffer[i].buf.sequence = 0;
+ queue->buffer[i].buf.field = V4L2_FIELD_NONE;
+ queue->buffer[i].buf.memory = V4L2_MEMORY_MMAP;
+ queue->buffer[i].buf.flags = 0;
+ init_waitqueue_head(&queue->buffer[i].wait);
+ }
+
+ queue->mem = mem;
+ queue->count = nbuffers;
+ queue->buf_size = bufsize;
+ ret = nbuffers;
+
+done:
+ mutex_unlock(&queue->mutex);
+ return ret;
+}
+
+/*
+ * Free the video buffers.
+ *
+ * This function must be called with the queue lock held.
+ */
+int uvc_free_buffers(struct uvc_video_queue *queue)
+{
+ unsigned int i;
+
+ for (i = 0; i < queue->count; ++i) {
+ if (queue->buffer[i].vma_use_count != 0)
+ return -EBUSY;
+ }
+
+ if (queue->count) {
+ vfree(queue->mem);
+ queue->count = 0;
+ }
+
+ return 0;
+}
+
+static void __uvc_query_buffer(struct uvc_buffer *buf,
+ struct v4l2_buffer *v4l2_buf)
+{
+ memcpy(v4l2_buf, &buf->buf, sizeof *v4l2_buf);
+
+ if (buf->vma_use_count)
+ v4l2_buf->flags |= V4L2_BUF_FLAG_MAPPED;
+
+ switch (buf->state) {
+ case UVC_BUF_STATE_ERROR:
+ case UVC_BUF_STATE_DONE:
+ v4l2_buf->flags |= V4L2_BUF_FLAG_DONE;
+ break;
+ case UVC_BUF_STATE_QUEUED:
+ case UVC_BUF_STATE_ACTIVE:
+ v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED;
+ break;
+ case UVC_BUF_STATE_IDLE:
+ default:
+ break;
+ }
+}
+
+int uvc_query_buffer(struct uvc_video_queue *queue,
+ struct v4l2_buffer *v4l2_buf)
+{
+ int ret = 0;
+
+ mutex_lock(&queue->mutex);
+ if (v4l2_buf->index >= queue->count) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ __uvc_query_buffer(&queue->buffer[v4l2_buf->index], v4l2_buf);
+
+done:
+ mutex_unlock(&queue->mutex);
+ return ret;
+}
+
+/*
+ * Queue a video buffer. Attempting to queue a buffer that has already been
+ * queued will return -EINVAL.
+ */
+int uvc_queue_buffer(struct uvc_video_queue *queue,
+ struct v4l2_buffer *v4l2_buf)
+{
+ struct uvc_buffer *buf;
+ unsigned long flags;
+ int ret = 0;
+
+ uvc_trace(UVC_TRACE_CAPTURE, "Queuing buffer %u.\n", v4l2_buf->index);
+
+ if (v4l2_buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ v4l2_buf->memory != V4L2_MEMORY_MMAP) {
+ uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) "
+ "and/or memory (%u).\n", v4l2_buf->type,
+ v4l2_buf->memory);
+ return -EINVAL;
+ }
+
+ mutex_lock(&queue->mutex);
+ if (v4l2_buf->index >= queue->count) {
+ uvc_trace(UVC_TRACE_CAPTURE, "[E] Out of range index.\n");
+ ret = -EINVAL;
+ goto done;
+ }
+
+ buf = &queue->buffer[v4l2_buf->index];
+ if (buf->state != UVC_BUF_STATE_IDLE) {
+ uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state "
+ "(%u).\n", buf->state);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ spin_lock_irqsave(&queue->irqlock, flags);
+ if (queue->flags & UVC_QUEUE_DISCONNECTED) {
+ spin_unlock_irqrestore(&queue->irqlock, flags);
+ ret = -ENODEV;
+ goto done;
+ }
+ buf->state = UVC_BUF_STATE_QUEUED;
+ buf->buf.bytesused = 0;
+ list_add_tail(&buf->stream, &queue->mainqueue);
+ list_add_tail(&buf->queue, &queue->irqqueue);
+ spin_unlock_irqrestore(&queue->irqlock, flags);
+
+done:
+ mutex_unlock(&queue->mutex);
+ return ret;
+}
+
+static int uvc_queue_waiton(struct uvc_buffer *buf, int nonblocking)
+{
+ if (nonblocking) {
+ return (buf->state != UVC_BUF_STATE_QUEUED &&
+ buf->state != UVC_BUF_STATE_ACTIVE)
+ ? 0 : -EAGAIN;
+ }
+
+ return wait_event_interruptible(buf->wait,
+ buf->state != UVC_BUF_STATE_QUEUED &&
+ buf->state != UVC_BUF_STATE_ACTIVE);
+}
+
+/*
+ * Dequeue a video buffer. If nonblocking is false, block until a buffer is
+ * available.
+ */
+int uvc_dequeue_buffer(struct uvc_video_queue *queue,
+ struct v4l2_buffer *v4l2_buf, int nonblocking)
+{
+ struct uvc_buffer *buf;
+ int ret = 0;
+
+ if (v4l2_buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ v4l2_buf->memory != V4L2_MEMORY_MMAP) {
+ uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) "
+ "and/or memory (%u).\n", v4l2_buf->type,
+ v4l2_buf->memory);
+ return -EINVAL;
+ }
+
+ mutex_lock(&queue->mutex);
+ if (list_empty(&queue->mainqueue)) {
+ uvc_trace(UVC_TRACE_CAPTURE, "[E] Empty buffer queue.\n");
+ ret = -EINVAL;
+ goto done;
+ }
+
+ buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream);
+ if ((ret = uvc_queue_waiton(buf, nonblocking)) < 0)
+ goto done;
+
+ uvc_trace(UVC_TRACE_CAPTURE, "Dequeuing buffer %u (%u, %u bytes).\n",
+ buf->buf.index, buf->state, buf->buf.bytesused);
+
+ switch (buf->state) {
+ case UVC_BUF_STATE_ERROR:
+ uvc_trace(UVC_TRACE_CAPTURE, "[W] Corrupted data "
+ "(transmission error).\n");
+ ret = -EIO;
+ case UVC_BUF_STATE_DONE:
+ buf->state = UVC_BUF_STATE_IDLE;
+ break;
+
+ case UVC_BUF_STATE_IDLE:
+ case UVC_BUF_STATE_QUEUED:
+ case UVC_BUF_STATE_ACTIVE:
+ default:
+ uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state %u "
+ "(driver bug?).\n", buf->state);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ list_del(&buf->stream);
+ __uvc_query_buffer(buf, v4l2_buf);
+
+done:
+ mutex_unlock(&queue->mutex);
+ return ret;
+}
+
+/*
+ * Poll the video queue.
+ *
+ * This function implements video queue polling and is intended to be used by
+ * the device poll handler.
+ */
+unsigned int uvc_queue_poll(struct uvc_video_queue *queue, struct file *file,
+ poll_table *wait)
+{
+ struct uvc_buffer *buf;
+ unsigned int mask = 0;
+
+ mutex_lock(&queue->mutex);
+ if (list_empty(&queue->mainqueue)) {
+ mask |= POLLERR;
+ goto done;
+ }
+ buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream);
+
+ poll_wait(file, &buf->wait, wait);
+ if (buf->state == UVC_BUF_STATE_DONE ||
+ buf->state == UVC_BUF_STATE_ERROR)
+ mask |= POLLIN | POLLRDNORM;
+
+done:
+ mutex_unlock(&queue->mutex);
+ return mask;
+}
+
+/*
+ * Enable or disable the video buffers queue.
+ *
+ * The queue must be enabled before starting video acquisition and must be
+ * disabled after stopping it. This ensures that the video buffers queue
+ * state can be properly initialized before buffers are accessed from the
+ * interrupt handler.
+ *
+ * Enabling the video queue initializes parameters (such as sequence number,
+ * sync pattern, ...). If the queue is already enabled, return -EBUSY.
+ *
+ * Disabling the video queue cancels the queue and removes all buffers from
+ * the main queue.
+ *
+ * This function can't be called from interrupt context. Use
+ * uvc_queue_cancel() instead.
+ */
+int uvc_queue_enable(struct uvc_video_queue *queue, int enable)
+{
+ unsigned int i;
+ int ret = 0;
+
+ mutex_lock(&queue->mutex);
+ if (enable) {
+ if (uvc_queue_streaming(queue)) {
+ ret = -EBUSY;
+ goto done;
+ }
+ queue->sequence = 0;
+ queue->flags |= UVC_QUEUE_STREAMING;
+ } else {
+ uvc_queue_cancel(queue, 0);
+ INIT_LIST_HEAD(&queue->mainqueue);
+
+ for (i = 0; i < queue->count; ++i)
+ queue->buffer[i].state = UVC_BUF_STATE_IDLE;
+
+ queue->flags &= ~UVC_QUEUE_STREAMING;
+ }
+
+done:
+ mutex_unlock(&queue->mutex);
+ return ret;
+}
+
+/*
+ * Cancel the video buffers queue.
+ *
+ * Cancelling the queue marks all buffers on the irq queue as erroneous,
+ * wakes them up and remove them from the queue.
+ *
+ * If the disconnect parameter is set, further calls to uvc_queue_buffer will
+ * fail with -ENODEV.
+ *
+ * This function acquires the irq spinlock and can be called from interrupt
+ * context.
+ */
+void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect)
+{
+ struct uvc_buffer *buf;
+ unsigned long flags;
+
+ spin_lock_irqsave(&queue->irqlock, flags);
+ while (!list_empty(&queue->irqqueue)) {
+ buf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
+ queue);
+ list_del(&buf->queue);
+ buf->state = UVC_BUF_STATE_ERROR;
+ wake_up(&buf->wait);
+ }
+ /* This must be protected by the irqlock spinlock to avoid race
+ * conditions between uvc_queue_buffer and the disconnection event that
+ * could result in an interruptible wait in uvc_dequeue_buffer. Do not
+ * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED
+ * state outside the queue code.
+ */
+ if (disconnect)
+ queue->flags |= UVC_QUEUE_DISCONNECTED;
+ spin_unlock_irqrestore(&queue->irqlock, flags);
+}
+
+struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
+ struct uvc_buffer *buf)
+{
+ struct uvc_buffer *nextbuf;
+ unsigned long flags;
+
+ if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) &&
+ buf->buf.length != buf->buf.bytesused) {
+ buf->state = UVC_BUF_STATE_QUEUED;
+ buf->buf.bytesused = 0;
+ return buf;
+ }
+
+ spin_lock_irqsave(&queue->irqlock, flags);
+ list_del(&buf->queue);
+ if (!list_empty(&queue->irqqueue))
+ nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
+ queue);
+ else
+ nextbuf = NULL;
+ spin_unlock_irqrestore(&queue->irqlock, flags);
+
+ buf->buf.sequence = queue->sequence++;
+ do_gettimeofday(&buf->buf.timestamp);
+
+ wake_up(&buf->wait);
+ return nextbuf;
+}
diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c
new file mode 100644
index 0000000..be9084e
--- /dev/null
+++ b/drivers/media/video/uvc/uvc_status.c
@@ -0,0 +1,207 @@
+/*
+ * uvc_status.c -- USB Video Class driver - Status endpoint
+ *
+ * Copyright (C) 2007-2008
+ * Laurent Pinchart (laurent.pinchart@skynet.be)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+
+#include "uvcvideo.h"
+
+/* --------------------------------------------------------------------------
+ * Input device
+ */
+static int uvc_input_init(struct uvc_device *dev)
+{
+ struct usb_device *udev = dev->udev;
+ struct input_dev *input;
+ char *phys = NULL;
+ int ret;
+
+ input = input_allocate_device();
+ if (input == NULL)
+ return -ENOMEM;
+
+ phys = kmalloc(6 + strlen(udev->bus->bus_name) + strlen(udev->devpath),
+ GFP_KERNEL);
+ if (phys == NULL) {
+ ret = -ENOMEM;
+ goto error;
+ }
+ sprintf(phys, "usb-%s-%s", udev->bus->bus_name, udev->devpath);
+
+ input->name = dev->name;
+ input->phys = phys;
+ usb_to_input_id(udev, &input->id);
+ input->dev.parent = &dev->intf->dev;
+
+ set_bit(EV_KEY, input->evbit);
+ set_bit(BTN_0, input->keybit);
+
+ if ((ret = input_register_device(input)) < 0)
+ goto error;
+
+ dev->input = input;
+ return 0;
+
+error:
+ input_free_device(input);
+ kfree(phys);
+ return ret;
+}
+
+static void uvc_input_cleanup(struct uvc_device *dev)
+{
+ if (dev->input)
+ input_unregister_device(dev->input);
+}
+
+/* --------------------------------------------------------------------------
+ * Status interrupt endpoint
+ */
+static void uvc_event_streaming(struct uvc_device *dev, __u8 *data, int len)
+{
+ if (len < 3) {
+ uvc_trace(UVC_TRACE_STATUS, "Invalid streaming status event "
+ "received.\n");
+ return;
+ }
+
+ if (data[2] == 0) {
+ if (len < 4)
+ return;
+ uvc_trace(UVC_TRACE_STATUS, "Button (intf %u) %s len %d\n",
+ data[1], data[3] ? "pressed" : "released", len);
+ if (dev->input)
+ input_report_key(dev->input, BTN_0, data[3]);
+ } else {
+ uvc_trace(UVC_TRACE_STATUS, "Stream %u error event %02x %02x "
+ "len %d.\n", data[1], data[2], data[3], len);
+ }
+}
+
+static void uvc_event_control(struct uvc_device *dev, __u8 *data, int len)
+{
+ char *attrs[3] = { "value", "info", "failure" };
+
+ if (len < 6 || data[2] != 0 || data[4] > 2) {
+ uvc_trace(UVC_TRACE_STATUS, "Invalid control status event "
+ "received.\n");
+ return;
+ }
+
+ uvc_trace(UVC_TRACE_STATUS, "Control %u/%u %s change len %d.\n",
+ data[1], data[3], attrs[data[4]], len);
+}
+
+static void uvc_status_complete(struct urb *urb)
+{
+ struct uvc_device *dev = urb->context;
+ int len, ret;
+
+ switch (urb->status) {
+ case 0:
+ break;
+
+ case -ENOENT: /* usb_kill_urb() called. */
+ case -ECONNRESET: /* usb_unlink_urb() called. */
+ case -ESHUTDOWN: /* The endpoint is being disabled. */
+ case -EPROTO: /* Device is disconnected (reported by some
+ * host controller). */
+ return;
+
+ default:
+ uvc_printk(KERN_WARNING, "Non-zero status (%d) in status "
+ "completion handler.\n", urb->status);
+ return;
+ }
+
+ len = urb->actual_length;
+ if (len > 0) {
+ switch (dev->status[0] & 0x0f) {
+ case UVC_STATUS_TYPE_CONTROL:
+ uvc_event_control(dev, dev->status, len);
+ break;
+
+ case UVC_STATUS_TYPE_STREAMING:
+ uvc_event_streaming(dev, dev->status, len);
+ break;
+
+ default:
+ uvc_printk(KERN_INFO, "unknown event type %u.\n",
+ dev->status[0]);
+ break;
+ }
+ }
+
+ /* Resubmit the URB. */
+ urb->interval = dev->int_ep->desc.bInterval;
+ if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
+ uvc_printk(KERN_ERR, "Failed to resubmit status URB (%d).\n",
+ ret);
+ }
+}
+
+int uvc_status_init(struct uvc_device *dev)
+{
+ struct usb_host_endpoint *ep = dev->int_ep;
+ unsigned int pipe;
+ int interval;
+
+ if (ep == NULL)
+ return 0;
+
+ uvc_input_init(dev);
+
+ dev->int_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (dev->int_urb == NULL)
+ return -ENOMEM;
+
+ pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
+
+ /* For high-speed interrupt endpoints, the bInterval value is used as
+ * an exponent of two. Some developers forgot about it.
+ */
+ interval = ep->desc.bInterval;
+ if (interval > 16 && dev->udev->speed == USB_SPEED_HIGH &&
+ (dev->quirks & UVC_QUIRK_STATUS_INTERVAL))
+ interval = fls(interval) - 1;
+
+ usb_fill_int_urb(dev->int_urb, dev->udev, pipe,
+ dev->status, sizeof dev->status, uvc_status_complete,
+ dev, interval);
+
+ return usb_submit_urb(dev->int_urb, GFP_KERNEL);
+}
+
+void uvc_status_cleanup(struct uvc_device *dev)
+{
+ usb_kill_urb(dev->int_urb);
+ usb_free_urb(dev->int_urb);
+ uvc_input_cleanup(dev);
+}
+
+int uvc_status_suspend(struct uvc_device *dev)
+{
+ usb_kill_urb(dev->int_urb);
+ return 0;
+}
+
+int uvc_status_resume(struct uvc_device *dev)
+{
+ if (dev->int_urb == NULL)
+ return 0;
+
+ return usb_submit_urb(dev->int_urb, GFP_KERNEL);
+}
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
new file mode 100644
index 0000000..2e0a665
--- /dev/null
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -0,0 +1,1105 @@
+/*
+ * uvc_v4l2.c -- USB Video Class driver - V4L2 API
+ *
+ * Copyright (C) 2005-2008
+ * Laurent Pinchart (laurent.pinchart@skynet.be)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
+#include <linux/wait.h>
+#include <asm/atomic.h>
+
+#include <media/v4l2-common.h>
+
+#include "uvcvideo.h"
+
+/* ------------------------------------------------------------------------
+ * V4L2 interface
+ */
+
+/*
+ * Mapping V4L2 controls to UVC controls can be straighforward if done well.
+ * Most of the UVC controls exist in V4L2, and can be mapped directly. Some
+ * must be grouped (for instance the Red Balance, Blue Balance and Do White
+ * Balance V4L2 controls use the White Balance Component UVC control) or
+ * otherwise translated. The approach we take here is to use a translation
+ * table for the controls which can be mapped directly, and handle the others
+ * manually.
+ */
+static int uvc_v4l2_query_menu(struct uvc_video_device *video,
+ struct v4l2_querymenu *query_menu)
+{
+ struct uvc_menu_info *menu_info;
+ struct uvc_control_mapping *mapping;
+ struct uvc_control *ctrl;
+
+ ctrl = uvc_find_control(video, query_menu->id, &mapping);
+ if (ctrl == NULL || mapping->v4l2_type != V4L2_CTRL_TYPE_MENU)
+ return -EINVAL;
+
+ if (query_menu->index >= mapping->menu_count)
+ return -EINVAL;
+
+ menu_info = &mapping->menu_info[query_menu->index];
+ strncpy(query_menu->name, menu_info->name, 32);
+ return 0;
+}
+
+/*
+ * Find the frame interval closest to the requested frame interval for the
+ * given frame format and size. This should be done by the device as part of
+ * the Video Probe and Commit negotiation, but some hardware don't implement
+ * that feature.
+ */
+static __u32 uvc_try_frame_interval(struct uvc_frame *frame, __u32 interval)
+{
+ unsigned int i;
+
+ if (frame->bFrameIntervalType) {
+ __u32 best = -1, dist;
+
+ for (i = 0; i < frame->bFrameIntervalType; ++i) {
+ dist = interval > frame->dwFrameInterval[i]
+ ? interval - frame->dwFrameInterval[i]
+ : frame->dwFrameInterval[i] - interval;
+
+ if (dist > best)
+ break;
+
+ best = dist;
+ }
+
+ interval = frame->dwFrameInterval[i-1];
+ } else {
+ const __u32 min = frame->dwFrameInterval[0];
+ const __u32 max = frame->dwFrameInterval[1];
+ const __u32 step = frame->dwFrameInterval[2];
+
+ interval = min + (interval - min + step/2) / step * step;
+ if (interval > max)
+ interval = max;
+ }
+
+ return interval;
+}
+
+static int uvc_v4l2_try_format(struct uvc_video_device *video,
+ struct v4l2_format *fmt, struct uvc_streaming_control *probe,
+ struct uvc_format **uvc_format, struct uvc_frame **uvc_frame)
+{
+ struct uvc_format *format = NULL;
+ struct uvc_frame *frame = NULL;
+ __u16 rw, rh;
+ unsigned int d, maxd;
+ unsigned int i;
+ __u32 interval;
+ int ret = 0;
+ __u8 *fcc;
+
+ if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ fcc = (__u8 *)&fmt->fmt.pix.pixelformat;
+ uvc_trace(UVC_TRACE_FORMAT, "Trying format 0x%08x (%c%c%c%c): %ux%u.\n",
+ fmt->fmt.pix.pixelformat,
+ fcc[0], fcc[1], fcc[2], fcc[3],
+ fmt->fmt.pix.width, fmt->fmt.pix.height);
+
+ /* Check if the hardware supports the requested format. */
+ for (i = 0; i < video->streaming->nformats; ++i) {
+ format = &video->streaming->format[i];
+ if (format->fcc == fmt->fmt.pix.pixelformat)
+ break;
+ }
+
+ if (format == NULL || format->fcc != fmt->fmt.pix.pixelformat) {
+ uvc_trace(UVC_TRACE_FORMAT, "Unsupported format 0x%08x.\n",
+ fmt->fmt.pix.pixelformat);
+ return -EINVAL;
+ }
+
+ /* Find the closest image size. The distance between image sizes is
+ * the size in pixels of the non-overlapping regions between the
+ * requested size and the frame-specified size.
+ */
+ rw = fmt->fmt.pix.width;
+ rh = fmt->fmt.pix.height;
+ maxd = (unsigned int)-1;
+
+ for (i = 0; i < format->nframes; ++i) {
+ __u16 w = format->frame[i].wWidth;
+ __u16 h = format->frame[i].wHeight;
+
+ d = min(w, rw) * min(h, rh);
+ d = w*h + rw*rh - 2*d;
+ if (d < maxd) {
+ maxd = d;
+ frame = &format->frame[i];
+ }
+
+ if (maxd == 0)
+ break;
+ }
+
+ if (frame == NULL) {
+ uvc_trace(UVC_TRACE_FORMAT, "Unsupported size %ux%u.\n",
+ fmt->fmt.pix.width, fmt->fmt.pix.height);
+ return -EINVAL;
+ }
+
+ /* Use the default frame interval. */
+ interval = frame->dwDefaultFrameInterval;
+ uvc_trace(UVC_TRACE_FORMAT, "Using default frame interval %u.%u us "
+ "(%u.%u fps).\n", interval/10, interval%10, 10000000/interval,
+ (100000000/interval)%10);
+
+ /* Set the format index, frame index and frame interval. */
+ memset(probe, 0, sizeof *probe);
+ probe->bmHint = 1; /* dwFrameInterval */
+ probe->bFormatIndex = format->index;
+ probe->bFrameIndex = frame->bFrameIndex;
+ probe->dwFrameInterval = uvc_try_frame_interval(frame, interval);
+ /* Some webcams stall the probe control set request when the
+ * dwMaxVideoFrameSize field is set to zero. The UVC specification
+ * clearly states that the field is read-only from the host, so this
+ * is a webcam bug. Set dwMaxVideoFrameSize to the value reported by
+ * the webcam to work around the problem.
+ *
+ * The workaround could probably be enabled for all webcams, so the
+ * quirk can be removed if needed. It's currently useful to detect
+ * webcam bugs and fix them before they hit the market (providing
+ * developers test their webcams with the Linux driver as well as with
+ * the Windows driver).
+ */
+ if (video->dev->quirks & UVC_QUIRK_PROBE_EXTRAFIELDS)
+ probe->dwMaxVideoFrameSize =
+ video->streaming->ctrl.dwMaxVideoFrameSize;
+
+ /* Probe the device */
+ if ((ret = uvc_probe_video(video, probe)) < 0)
+ goto done;
+
+ fmt->fmt.pix.width = frame->wWidth;
+ fmt->fmt.pix.height = frame->wHeight;
+ fmt->fmt.pix.field = V4L2_FIELD_NONE;
+ fmt->fmt.pix.bytesperline = format->bpp * frame->wWidth / 8;
+ fmt->fmt.pix.sizeimage = probe->dwMaxVideoFrameSize;
+ fmt->fmt.pix.colorspace = format->colorspace;
+ fmt->fmt.pix.priv = 0;
+
+ if (uvc_format != NULL)
+ *uvc_format = format;
+ if (uvc_frame != NULL)
+ *uvc_frame = frame;
+
+done:
+ return ret;
+}
+
+static int uvc_v4l2_get_format(struct uvc_video_device *video,
+ struct v4l2_format *fmt)
+{
+ struct uvc_format *format = video->streaming->cur_format;
+ struct uvc_frame *frame = video->streaming->cur_frame;
+
+ if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (format == NULL || frame == NULL)
+ return -EINVAL;
+
+ fmt->fmt.pix.pixelformat = format->fcc;
+ fmt->fmt.pix.width = frame->wWidth;
+ fmt->fmt.pix.height = frame->wHeight;
+ fmt->fmt.pix.field = V4L2_FIELD_NONE;
+ fmt->fmt.pix.bytesperline = format->bpp * frame->wWidth / 8;
+ fmt->fmt.pix.sizeimage = video->streaming->ctrl.dwMaxVideoFrameSize;
+ fmt->fmt.pix.colorspace = format->colorspace;
+ fmt->fmt.pix.priv = 0;
+
+ return 0;
+}
+
+static int uvc_v4l2_set_format(struct uvc_video_device *video,
+ struct v4l2_format *fmt)
+{
+ struct uvc_streaming_control probe;
+ struct uvc_format *format;
+ struct uvc_frame *frame;
+ int ret;
+
+ if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (uvc_queue_streaming(&video->queue))
+ return -EBUSY;
+
+ ret = uvc_v4l2_try_format(video, fmt, &probe, &format, &frame);
+ if (ret < 0)
+ return ret;
+
+ if ((ret = uvc_set_video_ctrl(video, &probe, 0)) < 0)
+ return ret;
+
+ memcpy(&video->streaming->ctrl, &probe, sizeof probe);
+ video->streaming->cur_format = format;
+ video->streaming->cur_frame = frame;
+
+ return 0;
+}
+
+static int uvc_v4l2_get_streamparm(struct uvc_video_device *video,
+ struct v4l2_streamparm *parm)
+{
+ uint32_t numerator, denominator;
+
+ if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ numerator = video->streaming->ctrl.dwFrameInterval;
+ denominator = 10000000;
+ uvc_simplify_fraction(&numerator, &denominator, 8, 333);
+
+ memset(parm, 0, sizeof *parm);
+ parm->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
+ parm->parm.capture.capturemode = 0;
+ parm->parm.capture.timeperframe.numerator = numerator;
+ parm->parm.capture.timeperframe.denominator = denominator;
+ parm->parm.capture.extendedmode = 0;
+ parm->parm.capture.readbuffers = 0;
+
+ return 0;
+}
+
+static int uvc_v4l2_set_streamparm(struct uvc_video_device *video,
+ struct v4l2_streamparm *parm)
+{
+ struct uvc_frame *frame = video->streaming->cur_frame;
+ struct uvc_streaming_control probe;
+ uint32_t interval;
+ int ret;
+
+ if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (uvc_queue_streaming(&video->queue))
+ return -EBUSY;
+
+ memcpy(&probe, &video->streaming->ctrl, sizeof probe);
+ interval = uvc_fraction_to_interval(
+ parm->parm.capture.timeperframe.numerator,
+ parm->parm.capture.timeperframe.denominator);
+
+ uvc_trace(UVC_TRACE_FORMAT, "Setting frame interval to %u/%u (%u).\n",
+ parm->parm.capture.timeperframe.numerator,
+ parm->parm.capture.timeperframe.denominator,
+ interval);
+ probe.dwFrameInterval = uvc_try_frame_interval(frame, interval);
+
+ /* Probe the device with the new settings. */
+ if ((ret = uvc_probe_video(video, &probe)) < 0)
+ return ret;
+
+ /* Commit the new settings. */
+ if ((ret = uvc_set_video_ctrl(video, &probe, 0)) < 0)
+ return ret;
+
+ memcpy(&video->streaming->ctrl, &probe, sizeof probe);
+
+ /* Return the actual frame period. */
+ parm->parm.capture.timeperframe.numerator = probe.dwFrameInterval;
+ parm->parm.capture.timeperframe.denominator = 10000000;
+ uvc_simplify_fraction(&parm->parm.capture.timeperframe.numerator,
+ &parm->parm.capture.timeperframe.denominator,
+ 8, 333);
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------
+ * Privilege management
+ */
+
+/*
+ * Privilege management is the multiple-open implementation basis. The current
+ * implementation is completely transparent for the end-user and doesn't
+ * require explicit use of the VIDIOC_G_PRIORITY and VIDIOC_S_PRIORITY ioctls.
+ * Those ioctls enable finer control on the device (by making possible for a
+ * user to request exclusive access to a device), but are not mature yet.
+ * Switching to the V4L2 priority mechanism might be considered in the future
+ * if this situation changes.
+ *
+ * Each open instance of a UVC device can either be in a privileged or
+ * unprivileged state. Only a single instance can be in a privileged state at
+ * a given time. Trying to perform an operation which requires privileges will
+ * automatically acquire the required privileges if possible, or return -EBUSY
+ * otherwise. Privileges are dismissed when closing the instance.
+ *
+ * Operations which require privileges are:
+ *
+ * - VIDIOC_S_INPUT
+ * - VIDIOC_S_PARM
+ * - VIDIOC_S_FMT
+ * - VIDIOC_TRY_FMT
+ * - VIDIOC_REQBUFS
+ */
+static int uvc_acquire_privileges(struct uvc_fh *handle)
+{
+ int ret = 0;
+
+ /* Always succeed if the handle is already privileged. */
+ if (handle->state == UVC_HANDLE_ACTIVE)
+ return 0;
+
+ /* Check if the device already has a privileged handle. */
+ mutex_lock(&uvc_driver.open_mutex);
+ if (atomic_inc_return(&handle->device->active) != 1) {
+ atomic_dec(&handle->device->active);
+ ret = -EBUSY;
+ goto done;
+ }
+
+ handle->state = UVC_HANDLE_ACTIVE;
+
+done:
+ mutex_unlock(&uvc_driver.open_mutex);
+ return ret;
+}
+
+static void uvc_dismiss_privileges(struct uvc_fh *handle)
+{
+ if (handle->state == UVC_HANDLE_ACTIVE)
+ atomic_dec(&handle->device->active);
+
+ handle->state = UVC_HANDLE_PASSIVE;
+}
+
+static int uvc_has_privileges(struct uvc_fh *handle)
+{
+ return handle->state == UVC_HANDLE_ACTIVE;
+}
+
+/* ------------------------------------------------------------------------
+ * V4L2 file operations
+ */
+
+static int uvc_v4l2_open(struct inode *inode, struct file *file)
+{
+ struct video_device *vdev;
+ struct uvc_video_device *video;
+ struct uvc_fh *handle;
+ int ret = 0;
+
+ uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_open\n");
+ mutex_lock(&uvc_driver.open_mutex);
+ vdev = video_devdata(file);
+ video = video_get_drvdata(vdev);
+
+ if (video->dev->state & UVC_DEV_DISCONNECTED) {
+ ret = -ENODEV;
+ goto done;
+ }
+
+ ret = usb_autopm_get_interface(video->dev->intf);
+ if (ret < 0)
+ goto done;
+
+ /* Create the device handle. */
+ handle = kzalloc(sizeof *handle, GFP_KERNEL);
+ if (handle == NULL) {
+ usb_autopm_put_interface(video->dev->intf);
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ handle->device = video;
+ handle->state = UVC_HANDLE_PASSIVE;
+ file->private_data = handle;
+
+ kref_get(&video->dev->kref);
+
+done:
+ mutex_unlock(&uvc_driver.open_mutex);
+ return ret;
+}
+
+static int uvc_v4l2_release(struct inode *inode, struct file *file)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct uvc_video_device *video = video_get_drvdata(vdev);
+ struct uvc_fh *handle = (struct uvc_fh *)file->private_data;
+
+ uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_release\n");
+
+ /* Only free resources if this is a privileged handle. */
+ if (uvc_has_privileges(handle)) {
+ uvc_video_enable(video, 0);
+
+ mutex_lock(&video->queue.mutex);
+ if (uvc_free_buffers(&video->queue) < 0)
+ uvc_printk(KERN_ERR, "uvc_v4l2_release: Unable to "
+ "free buffers.\n");
+ mutex_unlock(&video->queue.mutex);
+ }
+
+ /* Release the file handle. */
+ uvc_dismiss_privileges(handle);
+ kfree(handle);
+ file->private_data = NULL;
+
+ usb_autopm_put_interface(video->dev->intf);
+ kref_put(&video->dev->kref, uvc_delete);
+ return 0;
+}
+
+static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, void *arg)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct uvc_video_device *video = video_get_drvdata(vdev);
+ struct uvc_fh *handle = (struct uvc_fh *)file->private_data;
+ int ret = 0;
+
+ if (uvc_trace_param & UVC_TRACE_IOCTL)
+ v4l_printk_ioctl(cmd);
+
+ switch (cmd) {
+ /* Query capabilities */
+ case VIDIOC_QUERYCAP:
+ {
+ struct v4l2_capability *cap = arg;
+
+ memset(cap, 0, sizeof *cap);
+ strncpy(cap->driver, "uvcvideo", sizeof cap->driver);
+ strncpy(cap->card, vdev->name, 32);
+ strncpy(cap->bus_info, video->dev->udev->bus->bus_name,
+ sizeof cap->bus_info);
+ cap->version = DRIVER_VERSION_NUMBER;
+ cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
+ | V4L2_CAP_STREAMING;
+ break;
+ }
+
+ /* Get, Set & Query control */
+ case VIDIOC_QUERYCTRL:
+ return uvc_query_v4l2_ctrl(video, arg);
+
+ case VIDIOC_G_CTRL:
+ {
+ struct v4l2_control *ctrl = arg;
+ struct v4l2_ext_control xctrl;
+
+ memset(&xctrl, 0, sizeof xctrl);
+ xctrl.id = ctrl->id;
+
+ uvc_ctrl_begin(video);
+ ret = uvc_ctrl_get(video, &xctrl);
+ uvc_ctrl_rollback(video);
+ if (ret >= 0)
+ ctrl->value = xctrl.value;
+ break;
+ }
+
+ case VIDIOC_S_CTRL:
+ {
+ struct v4l2_control *ctrl = arg;
+ struct v4l2_ext_control xctrl;
+
+ memset(&xctrl, 0, sizeof xctrl);
+ xctrl.id = ctrl->id;
+ xctrl.value = ctrl->value;
+
+ uvc_ctrl_begin(video);
+ ret = uvc_ctrl_set(video, &xctrl);
+ if (ret < 0) {
+ uvc_ctrl_rollback(video);
+ return ret;
+ }
+ ret = uvc_ctrl_commit(video);
+ break;
+ }
+
+ case VIDIOC_QUERYMENU:
+ return uvc_v4l2_query_menu(video, arg);
+
+ case VIDIOC_G_EXT_CTRLS:
+ {
+ struct v4l2_ext_controls *ctrls = arg;
+ struct v4l2_ext_control *ctrl = ctrls->controls;
+ unsigned int i;
+
+ uvc_ctrl_begin(video);
+ for (i = 0; i < ctrls->count; ++ctrl, ++i) {
+ ret = uvc_ctrl_get(video, ctrl);
+ if (ret < 0) {
+ uvc_ctrl_rollback(video);
+ ctrls->error_idx = i;
+ return ret;
+ }
+ }
+ ctrls->error_idx = 0;
+ ret = uvc_ctrl_rollback(video);
+ break;
+ }
+
+ case VIDIOC_S_EXT_CTRLS:
+ case VIDIOC_TRY_EXT_CTRLS:
+ {
+ struct v4l2_ext_controls *ctrls = arg;
+ struct v4l2_ext_control *ctrl = ctrls->controls;
+ unsigned int i;
+
+ ret = uvc_ctrl_begin(video);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < ctrls->count; ++ctrl, ++i) {
+ ret = uvc_ctrl_set(video, ctrl);
+ if (ret < 0) {
+ uvc_ctrl_rollback(video);
+ ctrls->error_idx = i;
+ return ret;
+ }
+ }
+
+ ctrls->error_idx = 0;
+
+ if (cmd == VIDIOC_S_EXT_CTRLS)
+ ret = uvc_ctrl_commit(video);
+ else
+ ret = uvc_ctrl_rollback(video);
+ break;
+ }
+
+ /* Get, Set & Enum input */
+ case VIDIOC_ENUMINPUT:
+ {
+ const struct uvc_entity *selector = video->selector;
+ struct v4l2_input *input = arg;
+ struct uvc_entity *iterm = NULL;
+ u32 index = input->index;
+ int pin = 0;
+
+ if (selector == NULL ||
+ (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) {
+ if (index != 0)
+ return -EINVAL;
+ iterm = list_first_entry(&video->iterms,
+ struct uvc_entity, chain);
+ pin = iterm->id;
+ } else if (pin < selector->selector.bNrInPins) {
+ pin = selector->selector.baSourceID[index];
+ list_for_each_entry(iterm, video->iterms.next, chain) {
+ if (iterm->id == pin)
+ break;
+ }
+ }
+
+ if (iterm == NULL || iterm->id != pin)
+ return -EINVAL;
+
+ memset(input, 0, sizeof *input);
+ input->index = index;
+ strncpy(input->name, iterm->name, sizeof input->name);
+ if (UVC_ENTITY_TYPE(iterm) == ITT_CAMERA)
+ input->type = V4L2_INPUT_TYPE_CAMERA;
+ break;
+ }
+
+ case VIDIOC_G_INPUT:
+ {
+ u8 input;
+
+ if (video->selector == NULL ||
+ (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) {
+ *(int *)arg = 0;
+ break;
+ }
+
+ ret = uvc_query_ctrl(video->dev, GET_CUR, video->selector->id,
+ video->dev->intfnum, SU_INPUT_SELECT_CONTROL,
+ &input, 1);
+ if (ret < 0)
+ return ret;
+
+ *(int *)arg = input - 1;
+ break;
+ }
+
+ case VIDIOC_S_INPUT:
+ {
+ u8 input = *(u32 *)arg + 1;
+
+ if ((ret = uvc_acquire_privileges(handle)) < 0)
+ return ret;
+
+ if (video->selector == NULL ||
+ (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) {
+ if (input != 1)
+ return -EINVAL;
+ break;
+ }
+
+ if (input > video->selector->selector.bNrInPins)
+ return -EINVAL;
+
+ return uvc_query_ctrl(video->dev, SET_CUR, video->selector->id,
+ video->dev->intfnum, SU_INPUT_SELECT_CONTROL,
+ &input, 1);
+ }
+
+ /* Try, Get, Set & Enum format */
+ case VIDIOC_ENUM_FMT:
+ {
+ struct v4l2_fmtdesc *fmt = arg;
+ struct uvc_format *format;
+
+ if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ fmt->index >= video->streaming->nformats)
+ return -EINVAL;
+
+ format = &video->streaming->format[fmt->index];
+ fmt->flags = 0;
+ if (format->flags & UVC_FMT_FLAG_COMPRESSED)
+ fmt->flags |= V4L2_FMT_FLAG_COMPRESSED;
+ strncpy(fmt->description, format->name,
+ sizeof fmt->description);
+ fmt->description[sizeof fmt->description - 1] = 0;
+ fmt->pixelformat = format->fcc;
+ break;
+ }
+
+ case VIDIOC_TRY_FMT:
+ {
+ struct uvc_streaming_control probe;
+
+ if ((ret = uvc_acquire_privileges(handle)) < 0)
+ return ret;
+
+ return uvc_v4l2_try_format(video, arg, &probe, NULL, NULL);
+ }
+
+ case VIDIOC_S_FMT:
+ if ((ret = uvc_acquire_privileges(handle)) < 0)
+ return ret;
+
+ return uvc_v4l2_set_format(video, arg);
+
+ case VIDIOC_G_FMT:
+ return uvc_v4l2_get_format(video, arg);
+
+ /* Frame size enumeration */
+ case VIDIOC_ENUM_FRAMESIZES:
+ {
+ struct v4l2_frmsizeenum *fsize = arg;
+ struct uvc_format *format = NULL;
+ struct uvc_frame *frame;
+ int i;
+
+ /* Look for the given pixel format */
+ for (i = 0; i < video->streaming->nformats; i++) {
+ if (video->streaming->format[i].fcc ==
+ fsize->pixel_format) {
+ format = &video->streaming->format[i];
+ break;
+ }
+ }
+ if (format == NULL)
+ return -EINVAL;
+
+ if (fsize->index >= format->nframes)
+ return -EINVAL;
+
+ frame = &format->frame[fsize->index];
+ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+ fsize->discrete.width = frame->wWidth;
+ fsize->discrete.height = frame->wHeight;
+ break;
+ }
+
+ /* Frame interval enumeration */
+ case VIDIOC_ENUM_FRAMEINTERVALS:
+ {
+ struct v4l2_frmivalenum *fival = arg;
+ struct uvc_format *format = NULL;
+ struct uvc_frame *frame = NULL;
+ int i;
+
+ /* Look for the given pixel format and frame size */
+ for (i = 0; i < video->streaming->nformats; i++) {
+ if (video->streaming->format[i].fcc ==
+ fival->pixel_format) {
+ format = &video->streaming->format[i];
+ break;
+ }
+ }
+ if (format == NULL)
+ return -EINVAL;
+
+ for (i = 0; i < format->nframes; i++) {
+ if (format->frame[i].wWidth == fival->width &&
+ format->frame[i].wHeight == fival->height) {
+ frame = &format->frame[i];
+ break;
+ }
+ }
+ if (frame == NULL)
+ return -EINVAL;
+
+ if (frame->bFrameIntervalType) {
+ if (fival->index >= frame->bFrameIntervalType)
+ return -EINVAL;
+
+ fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
+ fival->discrete.numerator =
+ frame->dwFrameInterval[fival->index];
+ fival->discrete.denominator = 10000000;
+ uvc_simplify_fraction(&fival->discrete.numerator,
+ &fival->discrete.denominator, 8, 333);
+ } else {
+ fival->type = V4L2_FRMIVAL_TYPE_STEPWISE;
+ fival->stepwise.min.numerator =
+ frame->dwFrameInterval[0];
+ fival->stepwise.min.denominator = 10000000;
+ fival->stepwise.max.numerator =
+ frame->dwFrameInterval[1];
+ fival->stepwise.max.denominator = 10000000;
+ fival->stepwise.step.numerator =
+ frame->dwFrameInterval[2];
+ fival->stepwise.step.denominator = 10000000;
+ uvc_simplify_fraction(&fival->stepwise.min.numerator,
+ &fival->stepwise.min.denominator, 8, 333);
+ uvc_simplify_fraction(&fival->stepwise.max.numerator,
+ &fival->stepwise.max.denominator, 8, 333);
+ uvc_simplify_fraction(&fival->stepwise.step.numerator,
+ &fival->stepwise.step.denominator, 8, 333);
+ }
+ break;
+ }
+
+ /* Get & Set streaming parameters */
+ case VIDIOC_G_PARM:
+ return uvc_v4l2_get_streamparm(video, arg);
+
+ case VIDIOC_S_PARM:
+ if ((ret = uvc_acquire_privileges(handle)) < 0)
+ return ret;
+
+ return uvc_v4l2_set_streamparm(video, arg);
+
+ /* Cropping and scaling */
+ case VIDIOC_CROPCAP:
+ {
+ struct v4l2_cropcap *ccap = arg;
+ struct uvc_frame *frame = video->streaming->cur_frame;
+
+ if (ccap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ ccap->bounds.left = 0;
+ ccap->bounds.top = 0;
+ ccap->bounds.width = frame->wWidth;
+ ccap->bounds.height = frame->wHeight;
+
+ ccap->defrect = ccap->bounds;
+
+ ccap->pixelaspect.numerator = 1;
+ ccap->pixelaspect.denominator = 1;
+ break;
+ }
+
+ case VIDIOC_G_CROP:
+ case VIDIOC_S_CROP:
+ return -EINVAL;
+
+ /* Buffers & streaming */
+ case VIDIOC_REQBUFS:
+ {
+ struct v4l2_requestbuffers *rb = arg;
+ unsigned int bufsize =
+ video->streaming->ctrl.dwMaxVideoFrameSize;
+
+ if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ rb->memory != V4L2_MEMORY_MMAP)
+ return -EINVAL;
+
+ if ((ret = uvc_acquire_privileges(handle)) < 0)
+ return ret;
+
+ ret = uvc_alloc_buffers(&video->queue, rb->count, bufsize);
+ if (ret < 0)
+ return ret;
+
+ if (!(video->streaming->cur_format->flags &
+ UVC_FMT_FLAG_COMPRESSED))
+ video->queue.flags |= UVC_QUEUE_DROP_INCOMPLETE;
+
+ rb->count = ret;
+ ret = 0;
+ break;
+ }
+
+ case VIDIOC_QUERYBUF:
+ {
+ struct v4l2_buffer *buf = arg;
+
+ if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (!uvc_has_privileges(handle))
+ return -EBUSY;
+
+ return uvc_query_buffer(&video->queue, buf);
+ }
+
+ case VIDIOC_QBUF:
+ if (!uvc_has_privileges(handle))
+ return -EBUSY;
+
+ return uvc_queue_buffer(&video->queue, arg);
+
+ case VIDIOC_DQBUF:
+ if (!uvc_has_privileges(handle))
+ return -EBUSY;
+
+ return uvc_dequeue_buffer(&video->queue, arg,
+ file->f_flags & O_NONBLOCK);
+
+ case VIDIOC_STREAMON:
+ {
+ int *type = arg;
+
+ if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (!uvc_has_privileges(handle))
+ return -EBUSY;
+
+ if ((ret = uvc_video_enable(video, 1)) < 0)
+ return ret;
+ break;
+ }
+
+ case VIDIOC_STREAMOFF:
+ {
+ int *type = arg;
+
+ if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (!uvc_has_privileges(handle))
+ return -EBUSY;
+
+ return uvc_video_enable(video, 0);
+ }
+
+ /* Analog video standards make no sense for digital cameras. */
+ case VIDIOC_ENUMSTD:
+ case VIDIOC_QUERYSTD:
+ case VIDIOC_G_STD:
+ case VIDIOC_S_STD:
+
+ case VIDIOC_OVERLAY:
+
+ case VIDIOC_ENUMAUDIO:
+ case VIDIOC_ENUMAUDOUT:
+
+ case VIDIOC_ENUMOUTPUT:
+ uvc_trace(UVC_TRACE_IOCTL, "Unsupported ioctl 0x%08x\n", cmd);
+ return -EINVAL;
+
+ /* Dynamic controls. */
+ case UVCIOC_CTRL_ADD:
+ {
+ struct uvc_xu_control_info *xinfo = arg;
+ struct uvc_control_info *info;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ info = kmalloc(sizeof *info, GFP_KERNEL);
+ if (info == NULL)
+ return -ENOMEM;
+
+ memcpy(info->entity, xinfo->entity, sizeof info->entity);
+ info->index = xinfo->index;
+ info->selector = xinfo->selector;
+ info->size = xinfo->size;
+ info->flags = xinfo->flags;
+
+ info->flags |= UVC_CONTROL_GET_MIN | UVC_CONTROL_GET_MAX |
+ UVC_CONTROL_GET_RES | UVC_CONTROL_GET_DEF;
+
+ ret = uvc_ctrl_add_info(info);
+ if (ret < 0)
+ kfree(info);
+ break;
+ }
+
+ case UVCIOC_CTRL_MAP:
+ {
+ struct uvc_xu_control_mapping *xmap = arg;
+ struct uvc_control_mapping *map;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ map = kmalloc(sizeof *map, GFP_KERNEL);
+ if (map == NULL)
+ return -ENOMEM;
+
+ map->id = xmap->id;
+ memcpy(map->name, xmap->name, sizeof map->name);
+ memcpy(map->entity, xmap->entity, sizeof map->entity);
+ map->selector = xmap->selector;
+ map->size = xmap->size;
+ map->offset = xmap->offset;
+ map->v4l2_type = xmap->v4l2_type;
+ map->data_type = xmap->data_type;
+
+ ret = uvc_ctrl_add_mapping(map);
+ if (ret < 0)
+ kfree(map);
+ break;
+ }
+
+ case UVCIOC_CTRL_GET:
+ return uvc_xu_ctrl_query(video, arg, 0);
+
+ case UVCIOC_CTRL_SET:
+ return uvc_xu_ctrl_query(video, arg, 1);
+
+ default:
+ if ((ret = v4l_compat_translate_ioctl(inode, file, cmd, arg,
+ uvc_v4l2_do_ioctl)) == -ENOIOCTLCMD)
+ uvc_trace(UVC_TRACE_IOCTL, "Unknown ioctl 0x%08x\n",
+ cmd);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int uvc_v4l2_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_ioctl\n");
+ return video_usercopy(inode, file, cmd, arg, uvc_v4l2_do_ioctl);
+}
+
+static ssize_t uvc_v4l2_read(struct file *file, char __user *data,
+ size_t count, loff_t *ppos)
+{
+ uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_read: not implemented.\n");
+ return -ENODEV;
+}
+
+/*
+ * VMA operations.
+ */
+static void uvc_vm_open(struct vm_area_struct *vma)
+{
+ struct uvc_buffer *buffer = vma->vm_private_data;
+ buffer->vma_use_count++;
+}
+
+static void uvc_vm_close(struct vm_area_struct *vma)
+{
+ struct uvc_buffer *buffer = vma->vm_private_data;
+ buffer->vma_use_count--;
+}
+
+static struct vm_operations_struct uvc_vm_ops = {
+ .open = uvc_vm_open,
+ .close = uvc_vm_close,
+};
+
+static int uvc_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct uvc_video_device *video = video_get_drvdata(vdev);
+ struct uvc_buffer *buffer;
+ struct page *page;
+ unsigned long addr, start, size;
+ unsigned int i;
+ int ret = 0;
+
+ uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_mmap\n");
+
+ start = vma->vm_start;
+ size = vma->vm_end - vma->vm_start;
+
+ mutex_lock(&video->queue.mutex);
+
+ for (i = 0; i < video->queue.count; ++i) {
+ buffer = &video->queue.buffer[i];
+ if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff)
+ break;
+ }
+
+ if (i == video->queue.count || size != video->queue.buf_size) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ /*
+ * VM_IO marks the area as being an mmaped region for I/O to a
+ * device. It also prevents the region from being core dumped.
+ */
+ vma->vm_flags |= VM_IO;
+
+ addr = (unsigned long)video->queue.mem + buffer->buf.m.offset;
+ while (size > 0) {
+ page = vmalloc_to_page((void *)addr);
+ if ((ret = vm_insert_page(vma, start, page)) < 0)
+ goto done;
+
+ start += PAGE_SIZE;
+ addr += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+
+ vma->vm_ops = &uvc_vm_ops;
+ vma->vm_private_data = buffer;
+ uvc_vm_open(vma);
+
+done:
+ mutex_unlock(&video->queue.mutex);
+ return ret;
+}
+
+static unsigned int uvc_v4l2_poll(struct file *file, poll_table *wait)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct uvc_video_device *video = video_get_drvdata(vdev);
+
+ uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_poll\n");
+
+ return uvc_queue_poll(&video->queue, file, wait);
+}
+
+struct file_operations uvc_fops = {
+ .owner = THIS_MODULE,
+ .open = uvc_v4l2_open,
+ .release = uvc_v4l2_release,
+ .ioctl = uvc_v4l2_ioctl,
+ .compat_ioctl = v4l_compat_ioctl32,
+ .llseek = no_llseek,
+ .read = uvc_v4l2_read,
+ .mmap = uvc_v4l2_mmap,
+ .poll = uvc_v4l2_poll,
+};
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
new file mode 100644
index 0000000..6faf1fb
--- /dev/null
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -0,0 +1,934 @@
+/*
+ * uvc_video.c -- USB Video Class driver - Video handling
+ *
+ * Copyright (C) 2005-2008
+ * Laurent Pinchart (laurent.pinchart@skynet.be)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+#include <asm/atomic.h>
+#include <asm/unaligned.h>
+
+#include <media/v4l2-common.h>
+
+#include "uvcvideo.h"
+
+/* ------------------------------------------------------------------------
+ * UVC Controls
+ */
+
+static int __uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit,
+ __u8 intfnum, __u8 cs, void *data, __u16 size,
+ int timeout)
+{
+ __u8 type = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+ unsigned int pipe;
+ int ret;
+
+ pipe = (query & 0x80) ? usb_rcvctrlpipe(dev->udev, 0)
+ : usb_sndctrlpipe(dev->udev, 0);
+ type |= (query & 0x80) ? USB_DIR_IN : USB_DIR_OUT;
+
+ ret = usb_control_msg(dev->udev, pipe, query, type, cs << 8,
+ unit << 8 | intfnum, data, size, timeout);
+
+ if (ret != size) {
+ uvc_printk(KERN_ERR, "Failed to query (%u) UVC control %u "
+ "(unit %u) : %d (exp. %u).\n", query, cs, unit, ret,
+ size);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit,
+ __u8 intfnum, __u8 cs, void *data, __u16 size)
+{
+ return __uvc_query_ctrl(dev, query, unit, intfnum, cs, data, size,
+ UVC_CTRL_CONTROL_TIMEOUT);
+}
+
+static void uvc_fixup_buffer_size(struct uvc_video_device *video,
+ struct uvc_streaming_control *ctrl)
+{
+ struct uvc_format *format;
+ struct uvc_frame *frame;
+
+ if (ctrl->bFormatIndex <= 0 ||
+ ctrl->bFormatIndex > video->streaming->nformats)
+ return;
+
+ format = &video->streaming->format[ctrl->bFormatIndex - 1];
+
+ if (ctrl->bFrameIndex <= 0 ||
+ ctrl->bFrameIndex > format->nframes)
+ return;
+
+ frame = &format->frame[ctrl->bFrameIndex - 1];
+
+ if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) ||
+ (ctrl->dwMaxVideoFrameSize == 0 &&
+ video->dev->uvc_version < 0x0110))
+ ctrl->dwMaxVideoFrameSize =
+ frame->dwMaxVideoFrameBufferSize;
+}
+
+static int uvc_get_video_ctrl(struct uvc_video_device *video,
+ struct uvc_streaming_control *ctrl, int probe, __u8 query)
+{
+ __u8 data[34];
+ __u8 size;
+ int ret;
+
+ size = video->dev->uvc_version >= 0x0110 ? 34 : 26;
+ ret = __uvc_query_ctrl(video->dev, query, 0, video->streaming->intfnum,
+ probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size,
+ UVC_CTRL_STREAMING_TIMEOUT);
+
+ if (ret < 0)
+ return ret;
+
+ ctrl->bmHint = le16_to_cpup((__le16 *)&data[0]);
+ ctrl->bFormatIndex = data[2];
+ ctrl->bFrameIndex = data[3];
+ ctrl->dwFrameInterval = le32_to_cpup((__le32 *)&data[4]);
+ ctrl->wKeyFrameRate = le16_to_cpup((__le16 *)&data[8]);
+ ctrl->wPFrameRate = le16_to_cpup((__le16 *)&data[10]);
+ ctrl->wCompQuality = le16_to_cpup((__le16 *)&data[12]);
+ ctrl->wCompWindowSize = le16_to_cpup((__le16 *)&data[14]);
+ ctrl->wDelay = le16_to_cpup((__le16 *)&data[16]);
+ ctrl->dwMaxVideoFrameSize =
+ le32_to_cpu(get_unaligned((__le32 *)&data[18]));
+ ctrl->dwMaxPayloadTransferSize =
+ le32_to_cpu(get_unaligned((__le32 *)&data[22]));
+
+ if (size == 34) {
+ ctrl->dwClockFrequency =
+ le32_to_cpu(get_unaligned((__le32 *)&data[26]));
+ ctrl->bmFramingInfo = data[30];
+ ctrl->bPreferedVersion = data[31];
+ ctrl->bMinVersion = data[32];
+ ctrl->bMaxVersion = data[33];
+ } else {
+ ctrl->dwClockFrequency = video->dev->clock_frequency;
+ ctrl->bmFramingInfo = 0;
+ ctrl->bPreferedVersion = 0;
+ ctrl->bMinVersion = 0;
+ ctrl->bMaxVersion = 0;
+ }
+
+ /* Some broken devices return a null or wrong dwMaxVideoFrameSize.
+ * Try to get the value from the format and frame descriptor.
+ */
+ uvc_fixup_buffer_size(video, ctrl);
+
+ return 0;
+}
+
+int uvc_set_video_ctrl(struct uvc_video_device *video,
+ struct uvc_streaming_control *ctrl, int probe)
+{
+ __u8 data[34];
+ __u8 size;
+
+ size = video->dev->uvc_version >= 0x0110 ? 34 : 26;
+ memset(data, 0, sizeof data);
+
+ *(__le16 *)&data[0] = cpu_to_le16(ctrl->bmHint);
+ data[2] = ctrl->bFormatIndex;
+ data[3] = ctrl->bFrameIndex;
+ *(__le32 *)&data[4] = cpu_to_le32(ctrl->dwFrameInterval);
+ *(__le16 *)&data[8] = cpu_to_le16(ctrl->wKeyFrameRate);
+ *(__le16 *)&data[10] = cpu_to_le16(ctrl->wPFrameRate);
+ *(__le16 *)&data[12] = cpu_to_le16(ctrl->wCompQuality);
+ *(__le16 *)&data[14] = cpu_to_le16(ctrl->wCompWindowSize);
+ *(__le16 *)&data[16] = cpu_to_le16(ctrl->wDelay);
+ /* Note: Some of the fields below are not required for IN devices (see
+ * UVC spec, 4.3.1.1), but we still copy them in case support for OUT
+ * devices is added in the future. */
+ put_unaligned(cpu_to_le32(ctrl->dwMaxVideoFrameSize),
+ (__le32 *)&data[18]);
+ put_unaligned(cpu_to_le32(ctrl->dwMaxPayloadTransferSize),
+ (__le32 *)&data[22]);
+
+ if (size == 34) {
+ put_unaligned(cpu_to_le32(ctrl->dwClockFrequency),
+ (__le32 *)&data[26]);
+ data[30] = ctrl->bmFramingInfo;
+ data[31] = ctrl->bPreferedVersion;
+ data[32] = ctrl->bMinVersion;
+ data[33] = ctrl->bMaxVersion;
+ }
+
+ return __uvc_query_ctrl(video->dev, SET_CUR, 0,
+ video->streaming->intfnum,
+ probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size,
+ UVC_CTRL_STREAMING_TIMEOUT);
+}
+
+int uvc_probe_video(struct uvc_video_device *video,
+ struct uvc_streaming_control *probe)
+{
+ struct uvc_streaming_control probe_min, probe_max;
+ __u16 bandwidth;
+ unsigned int i;
+ int ret;
+
+ mutex_lock(&video->streaming->mutex);
+
+ /* Perform probing. The device should adjust the requested values
+ * according to its capabilities. However, some devices, namely the
+ * first generation UVC Logitech webcams, don't implement the Video
+ * Probe control properly, and just return the needed bandwidth. For
+ * that reason, if the needed bandwidth exceeds the maximum available
+ * bandwidth, try to lower the quality.
+ */
+ if ((ret = uvc_set_video_ctrl(video, probe, 1)) < 0)
+ goto done;
+
+ /* Get the minimum and maximum values for compression settings. */
+ if (!(video->dev->quirks & UVC_QUIRK_PROBE_MINMAX)) {
+ ret = uvc_get_video_ctrl(video, &probe_min, 1, GET_MIN);
+ if (ret < 0)
+ goto done;
+ ret = uvc_get_video_ctrl(video, &probe_max, 1, GET_MAX);
+ if (ret < 0)
+ goto done;
+
+ probe->wCompQuality = probe_max.wCompQuality;
+ }
+
+ for (i = 0; i < 2; ++i) {
+ if ((ret = uvc_set_video_ctrl(video, probe, 1)) < 0 ||
+ (ret = uvc_get_video_ctrl(video, probe, 1, GET_CUR)) < 0)
+ goto done;
+
+ if (video->streaming->intf->num_altsetting == 1)
+ break;
+
+ bandwidth = probe->dwMaxPayloadTransferSize;
+ if (bandwidth <= video->streaming->maxpsize)
+ break;
+
+ if (video->dev->quirks & UVC_QUIRK_PROBE_MINMAX) {
+ ret = -ENOSPC;
+ goto done;
+ }
+
+ /* TODO: negotiate compression parameters */
+ probe->wKeyFrameRate = probe_min.wKeyFrameRate;
+ probe->wPFrameRate = probe_min.wPFrameRate;
+ probe->wCompQuality = probe_max.wCompQuality;
+ probe->wCompWindowSize = probe_min.wCompWindowSize;
+ }
+
+done:
+ mutex_unlock(&video->streaming->mutex);
+ return ret;
+}
+
+/* ------------------------------------------------------------------------
+ * Video codecs
+ */
+
+/* Values for bmHeaderInfo (Video and Still Image Payload Headers, 2.4.3.3) */
+#define UVC_STREAM_EOH (1 << 7)
+#define UVC_STREAM_ERR (1 << 6)
+#define UVC_STREAM_STI (1 << 5)
+#define UVC_STREAM_RES (1 << 4)
+#define UVC_STREAM_SCR (1 << 3)
+#define UVC_STREAM_PTS (1 << 2)
+#define UVC_STREAM_EOF (1 << 1)
+#define UVC_STREAM_FID (1 << 0)
+
+/* Video payload decoding is handled by uvc_video_decode_start(),
+ * uvc_video_decode_data() and uvc_video_decode_end().
+ *
+ * uvc_video_decode_start is called with URB data at the start of a bulk or
+ * isochronous payload. It processes header data and returns the header size
+ * in bytes if successful. If an error occurs, it returns a negative error
+ * code. The following error codes have special meanings.
+ *
+ * - EAGAIN informs the caller that the current video buffer should be marked
+ * as done, and that the function should be called again with the same data
+ * and a new video buffer. This is used when end of frame conditions can be
+ * reliably detected at the beginning of the next frame only.
+ *
+ * If an error other than -EAGAIN is returned, the caller will drop the current
+ * payload. No call to uvc_video_decode_data and uvc_video_decode_end will be
+ * made until the next payload. -ENODATA can be used to drop the current
+ * payload if no other error code is appropriate.
+ *
+ * uvc_video_decode_data is called for every URB with URB data. It copies the
+ * data to the video buffer.
+ *
+ * uvc_video_decode_end is called with header data at the end of a bulk or
+ * isochronous payload. It performs any additional header data processing and
+ * returns 0 or a negative error code if an error occured. As header data have
+ * already been processed by uvc_video_decode_start, this functions isn't
+ * required to perform sanity checks a second time.
+ *
+ * For isochronous transfers where a payload is always transfered in a single
+ * URB, the three functions will be called in a row.
+ *
+ * To let the decoder process header data and update its internal state even
+ * when no video buffer is available, uvc_video_decode_start must be prepared
+ * to be called with a NULL buf parameter. uvc_video_decode_data and
+ * uvc_video_decode_end will never be called with a NULL buffer.
+ */
+static int uvc_video_decode_start(struct uvc_video_device *video,
+ struct uvc_buffer *buf, const __u8 *data, int len)
+{
+ __u8 fid;
+
+ /* Sanity checks:
+ * - packet must be at least 2 bytes long
+ * - bHeaderLength value must be at least 2 bytes (see above)
+ * - bHeaderLength value can't be larger than the packet size.
+ */
+ if (len < 2 || data[0] < 2 || data[0] > len)
+ return -EINVAL;
+
+ /* Skip payloads marked with the error bit ("error frames"). */
+ if (data[1] & UVC_STREAM_ERR) {
+ uvc_trace(UVC_TRACE_FRAME, "Dropping payload (error bit "
+ "set).\n");
+ return -ENODATA;
+ }
+
+ fid = data[1] & UVC_STREAM_FID;
+
+ /* Store the payload FID bit and return immediately when the buffer is
+ * NULL.
+ */
+ if (buf == NULL) {
+ video->last_fid = fid;
+ return -ENODATA;
+ }
+
+ /* Synchronize to the input stream by waiting for the FID bit to be
+ * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+ * queue->last_fid is initialized to -1, so the first isochronous
+ * frame will always be in sync.
+ *
+ * If the device doesn't toggle the FID bit, invert video->last_fid
+ * when the EOF bit is set to force synchronisation on the next packet.
+ */
+ if (buf->state != UVC_BUF_STATE_ACTIVE) {
+ if (fid == video->last_fid) {
+ uvc_trace(UVC_TRACE_FRAME, "Dropping payload (out of "
+ "sync).\n");
+ if ((video->dev->quirks & UVC_QUIRK_STREAM_NO_FID) &&
+ (data[1] & UVC_STREAM_EOF))
+ video->last_fid ^= UVC_STREAM_FID;
+ return -ENODATA;
+ }
+
+ /* TODO: Handle PTS and SCR. */
+ buf->state = UVC_BUF_STATE_ACTIVE;
+ }
+
+ /* Mark the buffer as done if we're at the beginning of a new frame.
+ * End of frame detection is better implemented by checking the EOF
+ * bit (FID bit toggling is delayed by one frame compared to the EOF
+ * bit), but some devices don't set the bit at end of frame (and the
+ * last payload can be lost anyway). We thus must check if the FID has
+ * been toggled.
+ *
+ * queue->last_fid is initialized to -1, so the first isochronous
+ * frame will never trigger an end of frame detection.
+ *
+ * Empty buffers (bytesused == 0) don't trigger end of frame detection
+ * as it doesn't make sense to return an empty buffer. This also
+ * avoids detecting and of frame conditions at FID toggling if the
+ * previous payload had the EOF bit set.
+ */
+ if (fid != video->last_fid && buf->buf.bytesused != 0) {
+ uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit "
+ "toggled).\n");
+ buf->state = UVC_BUF_STATE_DONE;
+ return -EAGAIN;
+ }
+
+ video->last_fid = fid;
+
+ return data[0];
+}
+
+static void uvc_video_decode_data(struct uvc_video_device *video,
+ struct uvc_buffer *buf, const __u8 *data, int len)
+{
+ struct uvc_video_queue *queue = &video->queue;
+ unsigned int maxlen, nbytes;
+ void *mem;
+
+ if (len <= 0)
+ return;
+
+ /* Copy the video data to the buffer. */
+ maxlen = buf->buf.length - buf->buf.bytesused;
+ mem = queue->mem + buf->buf.m.offset + buf->buf.bytesused;
+ nbytes = min((unsigned int)len, maxlen);
+ memcpy(mem, data, nbytes);
+ buf->buf.bytesused += nbytes;
+
+ /* Complete the current frame if the buffer size was exceeded. */
+ if (len > maxlen) {
+ uvc_trace(UVC_TRACE_FRAME, "Frame complete (overflow).\n");
+ buf->state = UVC_BUF_STATE_DONE;
+ }
+}
+
+static void uvc_video_decode_end(struct uvc_video_device *video,
+ struct uvc_buffer *buf, const __u8 *data, int len)
+{
+ /* Mark the buffer as done if the EOF marker is set. */
+ if (data[1] & UVC_STREAM_EOF && buf->buf.bytesused != 0) {
+ uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
+ if (data[0] == len)
+ uvc_trace(UVC_TRACE_FRAME, "EOF in empty payload.\n");
+ buf->state = UVC_BUF_STATE_DONE;
+ if (video->dev->quirks & UVC_QUIRK_STREAM_NO_FID)
+ video->last_fid ^= UVC_STREAM_FID;
+ }
+}
+
+/* ------------------------------------------------------------------------
+ * URB handling
+ */
+
+/*
+ * Completion handler for video URBs.
+ */
+static void uvc_video_decode_isoc(struct urb *urb,
+ struct uvc_video_device *video, struct uvc_buffer *buf)
+{
+ u8 *mem;
+ int ret, i;
+
+ for (i = 0; i < urb->number_of_packets; ++i) {
+ if (urb->iso_frame_desc[i].status < 0) {
+ uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame "
+ "lost (%d).\n", urb->iso_frame_desc[i].status);
+ continue;
+ }
+
+ /* Decode the payload header. */
+ mem = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+ do {
+ ret = uvc_video_decode_start(video, buf, mem,
+ urb->iso_frame_desc[i].actual_length);
+ if (ret == -EAGAIN)
+ buf = uvc_queue_next_buffer(&video->queue, buf);
+ } while (ret == -EAGAIN);
+
+ if (ret < 0)
+ continue;
+
+ /* Decode the payload data. */
+ uvc_video_decode_data(video, buf, mem + ret,
+ urb->iso_frame_desc[i].actual_length - ret);
+
+ /* Process the header again. */
+ uvc_video_decode_end(video, buf, mem, ret);
+
+ if (buf->state == UVC_BUF_STATE_DONE ||
+ buf->state == UVC_BUF_STATE_ERROR)
+ buf = uvc_queue_next_buffer(&video->queue, buf);
+ }
+}
+
+static void uvc_video_decode_bulk(struct urb *urb,
+ struct uvc_video_device *video, struct uvc_buffer *buf)
+{
+ u8 *mem;
+ int len, ret;
+
+ mem = urb->transfer_buffer;
+ len = urb->actual_length;
+ video->bulk.payload_size += len;
+
+ /* If the URB is the first of its payload, decode and save the
+ * header.
+ */
+ if (video->bulk.header_size == 0) {
+ do {
+ ret = uvc_video_decode_start(video, buf, mem, len);
+ if (ret == -EAGAIN)
+ buf = uvc_queue_next_buffer(&video->queue, buf);
+ } while (ret == -EAGAIN);
+
+ /* If an error occured skip the rest of the payload. */
+ if (ret < 0 || buf == NULL) {
+ video->bulk.skip_payload = 1;
+ return;
+ }
+
+ video->bulk.header_size = ret;
+ memcpy(video->bulk.header, mem, video->bulk.header_size);
+
+ mem += ret;
+ len -= ret;
+ }
+
+ /* The buffer queue might have been cancelled while a bulk transfer
+ * was in progress, so we can reach here with buf equal to NULL. Make
+ * sure buf is never dereferenced if NULL.
+ */
+
+ /* Process video data. */
+ if (!video->bulk.skip_payload && buf != NULL)
+ uvc_video_decode_data(video, buf, mem, len);
+
+ /* Detect the payload end by a URB smaller than the maximum size (or
+ * a payload size equal to the maximum) and process the header again.
+ */
+ if (urb->actual_length < urb->transfer_buffer_length ||
+ video->bulk.payload_size >= video->bulk.max_payload_size) {
+ if (!video->bulk.skip_payload && buf != NULL) {
+ uvc_video_decode_end(video, buf, video->bulk.header,
+ video->bulk.header_size);
+ if (buf->state == UVC_BUF_STATE_DONE ||
+ buf->state == UVC_BUF_STATE_ERROR)
+ buf = uvc_queue_next_buffer(&video->queue, buf);
+ }
+
+ video->bulk.header_size = 0;
+ video->bulk.skip_payload = 0;
+ video->bulk.payload_size = 0;
+ }
+}
+
+static void uvc_video_complete(struct urb *urb)
+{
+ struct uvc_video_device *video = urb->context;
+ struct uvc_video_queue *queue = &video->queue;
+ struct uvc_buffer *buf = NULL;
+ unsigned long flags;
+ int ret;
+
+ switch (urb->status) {
+ case 0:
+ break;
+
+ default:
+ uvc_printk(KERN_WARNING, "Non-zero status (%d) in video "
+ "completion handler.\n", urb->status);
+
+ case -ENOENT: /* usb_kill_urb() called. */
+ if (video->frozen)
+ return;
+
+ case -ECONNRESET: /* usb_unlink_urb() called. */
+ case -ESHUTDOWN: /* The endpoint is being disabled. */
+ uvc_queue_cancel(queue, urb->status == -ESHUTDOWN);
+ return;
+ }
+
+ spin_lock_irqsave(&queue->irqlock, flags);
+ if (!list_empty(&queue->irqqueue))
+ buf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
+ queue);
+ spin_unlock_irqrestore(&queue->irqlock, flags);
+
+ video->decode(urb, video, buf);
+
+ if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
+ uvc_printk(KERN_ERR, "Failed to resubmit video URB (%d).\n",
+ ret);
+ }
+}
+
+/*
+ * Uninitialize isochronous/bulk URBs and free transfer buffers.
+ */
+static void uvc_uninit_video(struct uvc_video_device *video)
+{
+ struct urb *urb;
+ unsigned int i;
+
+ for (i = 0; i < UVC_URBS; ++i) {
+ if ((urb = video->urb[i]) == NULL)
+ continue;
+
+ usb_kill_urb(urb);
+ /* urb->transfer_buffer_length is not touched by USB core, so
+ * we can use it here as the buffer length.
+ */
+ if (video->urb_buffer[i]) {
+ usb_buffer_free(video->dev->udev,
+ urb->transfer_buffer_length,
+ video->urb_buffer[i], urb->transfer_dma);
+ video->urb_buffer[i] = NULL;
+ }
+
+ usb_free_urb(urb);
+ video->urb[i] = NULL;
+ }
+}
+
+/*
+ * Initialize isochronous URBs and allocate transfer buffers. The packet size
+ * is given by the endpoint.
+ */
+static int uvc_init_video_isoc(struct uvc_video_device *video,
+ struct usb_host_endpoint *ep)
+{
+ struct urb *urb;
+ unsigned int npackets, i, j;
+ __u16 psize;
+ __u32 size;
+
+ /* Compute the number of isochronous packets to allocate by dividing
+ * the maximum video frame size by the packet size. Limit the result
+ * to UVC_MAX_ISO_PACKETS.
+ */
+ psize = le16_to_cpu(ep->desc.wMaxPacketSize);
+ psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3));
+
+ size = video->streaming->ctrl.dwMaxVideoFrameSize;
+ if (size > UVC_MAX_FRAME_SIZE)
+ return -EINVAL;
+
+ npackets = (size + psize - 1) / psize;
+ if (npackets > UVC_MAX_ISO_PACKETS)
+ npackets = UVC_MAX_ISO_PACKETS;
+
+ size = npackets * psize;
+
+ for (i = 0; i < UVC_URBS; ++i) {
+ urb = usb_alloc_urb(npackets, GFP_KERNEL);
+ if (urb == NULL) {
+ uvc_uninit_video(video);
+ return -ENOMEM;
+ }
+
+ video->urb_buffer[i] = usb_buffer_alloc(video->dev->udev,
+ size, GFP_KERNEL, &urb->transfer_dma);
+ if (video->urb_buffer[i] == NULL) {
+ usb_free_urb(urb);
+ uvc_uninit_video(video);
+ return -ENOMEM;
+ }
+
+ urb->dev = video->dev->udev;
+ urb->context = video;
+ urb->pipe = usb_rcvisocpipe(video->dev->udev,
+ ep->desc.bEndpointAddress);
+ urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+ urb->interval = ep->desc.bInterval;
+ urb->transfer_buffer = video->urb_buffer[i];
+ urb->complete = uvc_video_complete;
+ urb->number_of_packets = npackets;
+ urb->transfer_buffer_length = size;
+
+ for (j = 0; j < npackets; ++j) {
+ urb->iso_frame_desc[j].offset = j * psize;
+ urb->iso_frame_desc[j].length = psize;
+ }
+
+ video->urb[i] = urb;
+ }
+
+ return 0;
+}
+
+/*
+ * Initialize bulk URBs and allocate transfer buffers. The packet size is
+ * given by the endpoint.
+ */
+static int uvc_init_video_bulk(struct uvc_video_device *video,
+ struct usb_host_endpoint *ep)
+{
+ struct urb *urb;
+ unsigned int pipe, i;
+ __u16 psize;
+ __u32 size;
+
+ /* Compute the bulk URB size. Some devices set the maximum payload
+ * size to a value too high for memory-constrained devices. We must
+ * then transfer the payload accross multiple URBs. To be consistant
+ * with isochronous mode, allocate maximum UVC_MAX_ISO_PACKETS per bulk
+ * URB.
+ */
+ psize = le16_to_cpu(ep->desc.wMaxPacketSize) & 0x07ff;
+ size = video->streaming->ctrl.dwMaxPayloadTransferSize;
+ video->bulk.max_payload_size = size;
+ if (size > psize * UVC_MAX_ISO_PACKETS)
+ size = psize * UVC_MAX_ISO_PACKETS;
+
+ pipe = usb_rcvbulkpipe(video->dev->udev, ep->desc.bEndpointAddress);
+
+ for (i = 0; i < UVC_URBS; ++i) {
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (urb == NULL) {
+ uvc_uninit_video(video);
+ return -ENOMEM;
+ }
+
+ video->urb_buffer[i] = usb_buffer_alloc(video->dev->udev,
+ size, GFP_KERNEL, &urb->transfer_dma);
+ if (video->urb_buffer[i] == NULL) {
+ usb_free_urb(urb);
+ uvc_uninit_video(video);
+ return -ENOMEM;
+ }
+
+ usb_fill_bulk_urb(urb, video->dev->udev, pipe,
+ video->urb_buffer[i], size, uvc_video_complete,
+ video);
+ urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+
+ video->urb[i] = urb;
+ }
+
+ return 0;
+}
+
+/*
+ * Initialize isochronous/bulk URBs and allocate transfer buffers.
+ */
+static int uvc_init_video(struct uvc_video_device *video)
+{
+ struct usb_interface *intf = video->streaming->intf;
+ struct usb_host_interface *alts;
+ struct usb_host_endpoint *ep = NULL;
+ int intfnum = video->streaming->intfnum;
+ unsigned int bandwidth, psize, i;
+ int ret;
+
+ video->last_fid = -1;
+ video->bulk.header_size = 0;
+ video->bulk.skip_payload = 0;
+ video->bulk.payload_size = 0;
+
+ if (intf->num_altsetting > 1) {
+ /* Isochronous endpoint, select the alternate setting. */
+ bandwidth = video->streaming->ctrl.dwMaxPayloadTransferSize;
+
+ if (bandwidth == 0) {
+ uvc_printk(KERN_WARNING, "device %s requested null "
+ "bandwidth, defaulting to lowest.\n",
+ video->vdev->name);
+ bandwidth = 1;
+ }
+
+ for (i = 0; i < intf->num_altsetting; ++i) {
+ alts = &intf->altsetting[i];
+ ep = uvc_find_endpoint(alts,
+ video->streaming->header.bEndpointAddress);
+ if (ep == NULL)
+ continue;
+
+ /* Check if the bandwidth is high enough. */
+ psize = le16_to_cpu(ep->desc.wMaxPacketSize);
+ psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3));
+ if (psize >= bandwidth)
+ break;
+ }
+
+ if (i >= intf->num_altsetting)
+ return -EIO;
+
+ if ((ret = usb_set_interface(video->dev->udev, intfnum, i)) < 0)
+ return ret;
+
+ ret = uvc_init_video_isoc(video, ep);
+ } else {
+ /* Bulk endpoint, proceed to URB initialization. */
+ ep = uvc_find_endpoint(&intf->altsetting[0],
+ video->streaming->header.bEndpointAddress);
+ if (ep == NULL)
+ return -EIO;
+
+ ret = uvc_init_video_bulk(video, ep);
+ }
+
+ if (ret < 0)
+ return ret;
+
+ /* Submit the URBs. */
+ for (i = 0; i < UVC_URBS; ++i) {
+ if ((ret = usb_submit_urb(video->urb[i], GFP_KERNEL)) < 0) {
+ uvc_printk(KERN_ERR, "Failed to submit URB %u "
+ "(%d).\n", i, ret);
+ uvc_uninit_video(video);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/* --------------------------------------------------------------------------
+ * Suspend/resume
+ */
+
+/*
+ * Stop streaming without disabling the video queue.
+ *
+ * To let userspace applications resume without trouble, we must not touch the
+ * video buffers in any way. We mark the device as frozen to make sure the URB
+ * completion handler won't try to cancel the queue when we kill the URBs.
+ */
+int uvc_video_suspend(struct uvc_video_device *video)
+{
+ if (!uvc_queue_streaming(&video->queue))
+ return 0;
+
+ video->frozen = 1;
+ uvc_uninit_video(video);
+ usb_set_interface(video->dev->udev, video->streaming->intfnum, 0);
+ return 0;
+}
+
+/*
+ * Reconfigure the video interface and restart streaming if it was enable
+ * before suspend.
+ *
+ * If an error occurs, disable the video queue. This will wake all pending
+ * buffers, making sure userspace applications are notified of the problem
+ * instead of waiting forever.
+ */
+int uvc_video_resume(struct uvc_video_device *video)
+{
+ int ret;
+
+ video->frozen = 0;
+
+ if ((ret = uvc_set_video_ctrl(video, &video->streaming->ctrl, 0)) < 0) {
+ uvc_queue_enable(&video->queue, 0);
+ return ret;
+ }
+
+ if (!uvc_queue_streaming(&video->queue))
+ return 0;
+
+ if ((ret = uvc_init_video(video)) < 0)
+ uvc_queue_enable(&video->queue, 0);
+
+ return ret;
+}
+
+/* ------------------------------------------------------------------------
+ * Video device
+ */
+
+/*
+ * Initialize the UVC video device by retrieving the default format and
+ * committing it.
+ *
+ * Some cameras (namely the Fuji Finepix) set the format and frame
+ * indexes to zero. The UVC standard doesn't clearly make this a spec
+ * violation, so try to silently fix the values if possible.
+ *
+ * This function is called before registering the device with V4L.
+ */
+int uvc_video_init(struct uvc_video_device *video)
+{
+ struct uvc_streaming_control *probe = &video->streaming->ctrl;
+ struct uvc_format *format = NULL;
+ struct uvc_frame *frame = NULL;
+ unsigned int i;
+ int ret;
+
+ if (video->streaming->nformats == 0) {
+ uvc_printk(KERN_INFO, "No supported video formats found.\n");
+ return -EINVAL;
+ }
+
+ /* Alternate setting 0 should be the default, yet the XBox Live Vision
+ * Cam (and possibly other devices) crash or otherwise misbehave if
+ * they don't receive a SET_INTERFACE request before any other video
+ * control request.
+ */
+ usb_set_interface(video->dev->udev, video->streaming->intfnum, 0);
+
+ /* Some webcams don't suport GET_DEF request on the probe control. We
+ * fall back to GET_CUR if GET_DEF fails.
+ */
+ if ((ret = uvc_get_video_ctrl(video, probe, 1, GET_DEF)) < 0 &&
+ (ret = uvc_get_video_ctrl(video, probe, 1, GET_CUR)) < 0)
+ return ret;
+
+ /* Check if the default format descriptor exists. Use the first
+ * available format otherwise.
+ */
+ for (i = video->streaming->nformats; i > 0; --i) {
+ format = &video->streaming->format[i-1];
+ if (format->index == probe->bFormatIndex)
+ break;
+ }
+
+ if (format->nframes == 0) {
+ uvc_printk(KERN_INFO, "No frame descriptor found for the "
+ "default format.\n");
+ return -EINVAL;
+ }
+
+ /* Zero bFrameIndex might be correct. Stream-based formats (including
+ * MPEG-2 TS and DV) do not support frames but have a dummy frame
+ * descriptor with bFrameIndex set to zero. If the default frame
+ * descriptor is not found, use the first avalable frame.
+ */
+ for (i = format->nframes; i > 0; --i) {
+ frame = &format->frame[i-1];
+ if (frame->bFrameIndex == probe->bFrameIndex)
+ break;
+ }
+
+ /* Commit the default settings. */
+ probe->bFormatIndex = format->index;
+ probe->bFrameIndex = frame->bFrameIndex;
+ if ((ret = uvc_set_video_ctrl(video, probe, 0)) < 0)
+ return ret;
+
+ video->streaming->cur_format = format;
+ video->streaming->cur_frame = frame;
+ atomic_set(&video->active, 0);
+
+ /* Select the video decoding function */
+ if (video->dev->quirks & UVC_QUIRK_BUILTIN_ISIGHT)
+ video->decode = uvc_video_decode_isight;
+ else if (video->streaming->intf->num_altsetting > 1)
+ video->decode = uvc_video_decode_isoc;
+ else
+ video->decode = uvc_video_decode_bulk;
+
+ return 0;
+}
+
+/*
+ * Enable or disable the video stream.
+ */
+int uvc_video_enable(struct uvc_video_device *video, int enable)
+{
+ int ret;
+
+ if (!enable) {
+ uvc_uninit_video(video);
+ usb_set_interface(video->dev->udev,
+ video->streaming->intfnum, 0);
+ uvc_queue_enable(&video->queue, 0);
+ return 0;
+ }
+
+ if ((ret = uvc_queue_enable(&video->queue, 1)) < 0)
+ return ret;
+
+ return uvc_init_video(video);
+}
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
new file mode 100644
index 0000000..a995a78
--- /dev/null
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -0,0 +1,796 @@
+#ifndef _USB_VIDEO_H_
+#define _USB_VIDEO_H_
+
+#include <linux/kernel.h>
+#include <linux/videodev2.h>
+
+
+/*
+ * Dynamic controls
+ */
+
+/* Data types for UVC control data */
+#define UVC_CTRL_DATA_TYPE_RAW 0
+#define UVC_CTRL_DATA_TYPE_SIGNED 1
+#define UVC_CTRL_DATA_TYPE_UNSIGNED 2
+#define UVC_CTRL_DATA_TYPE_BOOLEAN 3
+#define UVC_CTRL_DATA_TYPE_ENUM 4
+#define UVC_CTRL_DATA_TYPE_BITMASK 5
+
+/* Control flags */
+#define UVC_CONTROL_SET_CUR (1 << 0)
+#define UVC_CONTROL_GET_CUR (1 << 1)
+#define UVC_CONTROL_GET_MIN (1 << 2)
+#define UVC_CONTROL_GET_MAX (1 << 3)
+#define UVC_CONTROL_GET_RES (1 << 4)
+#define UVC_CONTROL_GET_DEF (1 << 5)
+/* Control should be saved at suspend and restored at resume. */
+#define UVC_CONTROL_RESTORE (1 << 6)
+/* Control can be updated by the camera. */
+#define UVC_CONTROL_AUTO_UPDATE (1 << 7)
+
+#define UVC_CONTROL_GET_RANGE (UVC_CONTROL_GET_CUR | UVC_CONTROL_GET_MIN | \
+ UVC_CONTROL_GET_MAX | UVC_CONTROL_GET_RES | \
+ UVC_CONTROL_GET_DEF)
+
+struct uvc_xu_control_info {
+ __u8 entity[16];
+ __u8 index;
+ __u8 selector;
+ __u16 size;
+ __u32 flags;
+};
+
+struct uvc_xu_control_mapping {
+ __u32 id;
+ __u8 name[32];
+ __u8 entity[16];
+ __u8 selector;
+
+ __u8 size;
+ __u8 offset;
+ enum v4l2_ctrl_type v4l2_type;
+ __u32 data_type;
+};
+
+struct uvc_xu_control {
+ __u8 unit;
+ __u8 selector;
+ __u16 size;
+ __u8 __user *data;
+};
+
+#define UVCIOC_CTRL_ADD _IOW('U', 1, struct uvc_xu_control_info)
+#define UVCIOC_CTRL_MAP _IOWR('U', 2, struct uvc_xu_control_mapping)
+#define UVCIOC_CTRL_GET _IOWR('U', 3, struct uvc_xu_control)
+#define UVCIOC_CTRL_SET _IOW('U', 4, struct uvc_xu_control)
+
+#ifdef __KERNEL__
+
+#include <linux/poll.h>
+
+/* --------------------------------------------------------------------------
+ * UVC constants
+ */
+
+#define SC_UNDEFINED 0x00
+#define SC_VIDEOCONTROL 0x01
+#define SC_VIDEOSTREAMING 0x02
+#define SC_VIDEO_INTERFACE_COLLECTION 0x03
+
+#define PC_PROTOCOL_UNDEFINED 0x00
+
+#define CS_UNDEFINED 0x20
+#define CS_DEVICE 0x21
+#define CS_CONFIGURATION 0x22
+#define CS_STRING 0x23
+#define CS_INTERFACE 0x24
+#define CS_ENDPOINT 0x25
+
+/* VideoControl class specific interface descriptor */
+#define VC_DESCRIPTOR_UNDEFINED 0x00
+#define VC_HEADER 0x01
+#define VC_INPUT_TERMINAL 0x02
+#define VC_OUTPUT_TERMINAL 0x03
+#define VC_SELECTOR_UNIT 0x04
+#define VC_PROCESSING_UNIT 0x05
+#define VC_EXTENSION_UNIT 0x06
+
+/* VideoStreaming class specific interface descriptor */
+#define VS_UNDEFINED 0x00
+#define VS_INPUT_HEADER 0x01
+#define VS_OUTPUT_HEADER 0x02
+#define VS_STILL_IMAGE_FRAME 0x03
+#define VS_FORMAT_UNCOMPRESSED 0x04
+#define VS_FRAME_UNCOMPRESSED 0x05
+#define VS_FORMAT_MJPEG 0x06
+#define VS_FRAME_MJPEG 0x07
+#define VS_FORMAT_MPEG2TS 0x0a
+#define VS_FORMAT_DV 0x0c
+#define VS_COLORFORMAT 0x0d
+#define VS_FORMAT_FRAME_BASED 0x10
+#define VS_FRAME_FRAME_BASED 0x11
+#define VS_FORMAT_STREAM_BASED 0x12
+
+/* Endpoint type */
+#define EP_UNDEFINED 0x00
+#define EP_GENERAL 0x01
+#define EP_ENDPOINT 0x02
+#define EP_INTERRUPT 0x03
+
+/* Request codes */
+#define RC_UNDEFINED 0x00
+#define SET_CUR 0x01
+#define GET_CUR 0x81
+#define GET_MIN 0x82
+#define GET_MAX 0x83
+#define GET_RES 0x84
+#define GET_LEN 0x85
+#define GET_INFO 0x86
+#define GET_DEF 0x87
+
+/* VideoControl interface controls */
+#define VC_CONTROL_UNDEFINED 0x00
+#define VC_VIDEO_POWER_MODE_CONTROL 0x01
+#define VC_REQUEST_ERROR_CODE_CONTROL 0x02
+
+/* Terminal controls */
+#define TE_CONTROL_UNDEFINED 0x00
+
+/* Selector Unit controls */
+#define SU_CONTROL_UNDEFINED 0x00
+#define SU_INPUT_SELECT_CONTROL 0x01
+
+/* Camera Terminal controls */
+#define CT_CONTROL_UNDEFINED 0x00
+#define CT_SCANNING_MODE_CONTROL 0x01
+#define CT_AE_MODE_CONTROL 0x02
+#define CT_AE_PRIORITY_CONTROL 0x03
+#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04
+#define CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05
+#define CT_FOCUS_ABSOLUTE_CONTROL 0x06
+#define CT_FOCUS_RELATIVE_CONTROL 0x07
+#define CT_FOCUS_AUTO_CONTROL 0x08
+#define CT_IRIS_ABSOLUTE_CONTROL 0x09
+#define CT_IRIS_RELATIVE_CONTROL 0x0a
+#define CT_ZOOM_ABSOLUTE_CONTROL 0x0b
+#define CT_ZOOM_RELATIVE_CONTROL 0x0c
+#define CT_PANTILT_ABSOLUTE_CONTROL 0x0d
+#define CT_PANTILT_RELATIVE_CONTROL 0x0e
+#define CT_ROLL_ABSOLUTE_CONTROL 0x0f
+#define CT_ROLL_RELATIVE_CONTROL 0x10
+#define CT_PRIVACY_CONTROL 0x11
+
+/* Processing Unit controls */
+#define PU_CONTROL_UNDEFINED 0x00
+#define PU_BACKLIGHT_COMPENSATION_CONTROL 0x01
+#define PU_BRIGHTNESS_CONTROL 0x02
+#define PU_CONTRAST_CONTROL 0x03
+#define PU_GAIN_CONTROL 0x04
+#define PU_POWER_LINE_FREQUENCY_CONTROL 0x05
+#define PU_HUE_CONTROL 0x06
+#define PU_SATURATION_CONTROL 0x07
+#define PU_SHARPNESS_CONTROL 0x08
+#define PU_GAMMA_CONTROL 0x09
+#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a
+#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b
+#define PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c
+#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d
+#define PU_DIGITAL_MULTIPLIER_CONTROL 0x0e
+#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f
+#define PU_HUE_AUTO_CONTROL 0x10
+#define PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11
+#define PU_ANALOG_LOCK_STATUS_CONTROL 0x12
+
+#define LXU_MOTOR_PANTILT_RELATIVE_CONTROL 0x01
+#define LXU_MOTOR_PANTILT_RESET_CONTROL 0x02
+#define LXU_MOTOR_FOCUS_MOTOR_CONTROL 0x03
+
+/* VideoStreaming interface controls */
+#define VS_CONTROL_UNDEFINED 0x00
+#define VS_PROBE_CONTROL 0x01
+#define VS_COMMIT_CONTROL 0x02
+#define VS_STILL_PROBE_CONTROL 0x03
+#define VS_STILL_COMMIT_CONTROL 0x04
+#define VS_STILL_IMAGE_TRIGGER_CONTROL 0x05
+#define VS_STREAM_ERROR_CODE_CONTROL 0x06
+#define VS_GENERATE_KEY_FRAME_CONTROL 0x07
+#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08
+#define VS_SYNC_DELAY_CONTROL 0x09
+
+#define TT_VENDOR_SPECIFIC 0x0100
+#define TT_STREAMING 0x0101
+
+/* Input Terminal types */
+#define ITT_VENDOR_SPECIFIC 0x0200
+#define ITT_CAMERA 0x0201
+#define ITT_MEDIA_TRANSPORT_INPUT 0x0202
+
+/* Output Terminal types */
+#define OTT_VENDOR_SPECIFIC 0x0300
+#define OTT_DISPLAY 0x0301
+#define OTT_MEDIA_TRANSPORT_OUTPUT 0x0302
+
+/* External Terminal types */
+#define EXTERNAL_VENDOR_SPECIFIC 0x0400
+#define COMPOSITE_CONNECTOR 0x0401
+#define SVIDEO_CONNECTOR 0x0402
+#define COMPONENT_CONNECTOR 0x0403
+
+#define UVC_TERM_INPUT 0x0000
+#define UVC_TERM_OUTPUT 0x8000
+
+#define UVC_ENTITY_TYPE(entity) ((entity)->type & 0x7fff)
+#define UVC_ENTITY_IS_UNIT(entity) (((entity)->type & 0xff00) == 0)
+#define UVC_ENTITY_IS_TERM(entity) (((entity)->type & 0xff00) != 0)
+#define UVC_ENTITY_IS_ITERM(entity) \
+ (((entity)->type & 0x8000) == UVC_TERM_INPUT)
+#define UVC_ENTITY_IS_OTERM(entity) \
+ (((entity)->type & 0x8000) == UVC_TERM_OUTPUT)
+
+#define UVC_STATUS_TYPE_CONTROL 1
+#define UVC_STATUS_TYPE_STREAMING 2
+
+/* ------------------------------------------------------------------------
+ * GUIDs
+ */
+#define UVC_GUID_UVC_CAMERA \
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01}
+#define UVC_GUID_UVC_OUTPUT \
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02}
+#define UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT \
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03}
+#define UVC_GUID_UVC_PROCESSING \
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01}
+#define UVC_GUID_UVC_SELECTOR \
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02}
+
+#define UVC_GUID_LOGITECH_DEV_INFO \
+ {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \
+ 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x1e}
+#define UVC_GUID_LOGITECH_USER_HW \
+ {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \
+ 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x1f}
+#define UVC_GUID_LOGITECH_VIDEO \
+ {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \
+ 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x50}
+#define UVC_GUID_LOGITECH_MOTOR \
+ {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \
+ 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x56}
+
+#define UVC_GUID_FORMAT_MJPEG \
+ { 'M', 'J', 'P', 'G', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_YUY2 \
+ { 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_NV12 \
+ { 'N', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_YV12 \
+ { 'Y', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_I420 \
+ { 'I', '4', '2', '0', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_UYVY \
+ { 'U', 'Y', 'V', 'Y', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_Y800 \
+ { 'Y', '8', '0', '0', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_BY8 \
+ { 'B', 'Y', '8', ' ', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+
+
+/* ------------------------------------------------------------------------
+ * Driver specific constants.
+ */
+
+#define DRIVER_VERSION_NUMBER KERNEL_VERSION(0, 1, 0)
+
+/* Number of isochronous URBs. */
+#define UVC_URBS 5
+/* Maximum number of packets per isochronous URB. */
+#define UVC_MAX_ISO_PACKETS 40
+/* Maximum frame size in bytes, for sanity checking. */
+#define UVC_MAX_FRAME_SIZE (16*1024*1024)
+/* Maximum number of video buffers. */
+#define UVC_MAX_VIDEO_BUFFERS 32
+
+#define UVC_CTRL_CONTROL_TIMEOUT 300
+#define UVC_CTRL_STREAMING_TIMEOUT 1000
+
+/* Devices quirks */
+#define UVC_QUIRK_STATUS_INTERVAL 0x00000001
+#define UVC_QUIRK_PROBE_MINMAX 0x00000002
+#define UVC_QUIRK_PROBE_EXTRAFIELDS 0x00000004
+#define UVC_QUIRK_BUILTIN_ISIGHT 0x00000008
+#define UVC_QUIRK_STREAM_NO_FID 0x00000010
+#define UVC_QUIRK_IGNORE_SELECTOR_UNIT 0x00000020
+
+/* Format flags */
+#define UVC_FMT_FLAG_COMPRESSED 0x00000001
+#define UVC_FMT_FLAG_STREAM 0x00000002
+
+/* ------------------------------------------------------------------------
+ * Structures.
+ */
+
+struct uvc_device;
+
+/* TODO: Put the most frequently accessed fields at the beginning of
+ * structures to maximize cache efficiency.
+ */
+struct uvc_streaming_control {
+ __u16 bmHint;
+ __u8 bFormatIndex;
+ __u8 bFrameIndex;
+ __u32 dwFrameInterval;
+ __u16 wKeyFrameRate;
+ __u16 wPFrameRate;
+ __u16 wCompQuality;
+ __u16 wCompWindowSize;
+ __u16 wDelay;
+ __u32 dwMaxVideoFrameSize;
+ __u32 dwMaxPayloadTransferSize;
+ __u32 dwClockFrequency;
+ __u8 bmFramingInfo;
+ __u8 bPreferedVersion;
+ __u8 bMinVersion;
+ __u8 bMaxVersion;
+};
+
+struct uvc_menu_info {
+ __u32 value;
+ __u8 name[32];
+};
+
+struct uvc_control_info {
+ struct list_head list;
+ struct list_head mappings;
+
+ __u8 entity[16];
+ __u8 index;
+ __u8 selector;
+
+ __u16 size;
+ __u32 flags;
+};
+
+struct uvc_control_mapping {
+ struct list_head list;
+
+ struct uvc_control_info *ctrl;
+
+ __u32 id;
+ __u8 name[32];
+ __u8 entity[16];
+ __u8 selector;
+
+ __u8 size;
+ __u8 offset;
+ enum v4l2_ctrl_type v4l2_type;
+ __u32 data_type;
+
+ struct uvc_menu_info *menu_info;
+ __u32 menu_count;
+};
+
+struct uvc_control {
+ struct uvc_entity *entity;
+ struct uvc_control_info *info;
+
+ __u8 index; /* Used to match the uvc_control entry with a
+ uvc_control_info. */
+ __u8 dirty : 1,
+ loaded : 1,
+ modified : 1;
+
+ __u8 *data;
+};
+
+struct uvc_format_desc {
+ char *name;
+ __u8 guid[16];
+ __u32 fcc;
+};
+
+/* The term 'entity' refers to both UVC units and UVC terminals.
+ *
+ * The type field is either the terminal type (wTerminalType in the terminal
+ * descriptor), or the unit type (bDescriptorSubtype in the unit descriptor).
+ * As the bDescriptorSubtype field is one byte long, the type value will
+ * always have a null MSB for units. All terminal types defined by the UVC
+ * specification have a non-null MSB, so it is safe to use the MSB to
+ * differentiate between units and terminals as long as the descriptor parsing
+ * code makes sure terminal types have a non-null MSB.
+ *
+ * For terminals, the type's most significant bit stores the terminal
+ * direction (either UVC_TERM_INPUT or UVC_TERM_OUTPUT). The type field should
+ * always be accessed with the UVC_ENTITY_* macros and never directly.
+ */
+
+struct uvc_entity {
+ struct list_head list; /* Entity as part of a UVC device. */
+ struct list_head chain; /* Entity as part of a video device
+ * chain. */
+ __u8 id;
+ __u16 type;
+ char name[64];
+
+ union {
+ struct {
+ __u16 wObjectiveFocalLengthMin;
+ __u16 wObjectiveFocalLengthMax;
+ __u16 wOcularFocalLength;
+ __u8 bControlSize;
+ __u8 *bmControls;
+ } camera;
+
+ struct {
+ __u8 bControlSize;
+ __u8 *bmControls;
+ __u8 bTransportModeSize;
+ __u8 *bmTransportModes;
+ } media;
+
+ struct {
+ __u8 bSourceID;
+ } output;
+
+ struct {
+ __u8 bSourceID;
+ __u16 wMaxMultiplier;
+ __u8 bControlSize;
+ __u8 *bmControls;
+ __u8 bmVideoStandards;
+ } processing;
+
+ struct {
+ __u8 bNrInPins;
+ __u8 *baSourceID;
+ } selector;
+
+ struct {
+ __u8 guidExtensionCode[16];
+ __u8 bNumControls;
+ __u8 bNrInPins;
+ __u8 *baSourceID;
+ __u8 bControlSize;
+ __u8 *bmControls;
+ __u8 *bmControlsType;
+ } extension;
+ };
+
+ unsigned int ncontrols;
+ struct uvc_control *controls;
+};
+
+struct uvc_frame {
+ __u8 bFrameIndex;
+ __u8 bmCapabilities;
+ __u16 wWidth;
+ __u16 wHeight;
+ __u32 dwMinBitRate;
+ __u32 dwMaxBitRate;
+ __u32 dwMaxVideoFrameBufferSize;
+ __u8 bFrameIntervalType;
+ __u32 dwDefaultFrameInterval;
+ __u32 *dwFrameInterval;
+};
+
+struct uvc_format {
+ __u8 type;
+ __u8 index;
+ __u8 bpp;
+ __u8 colorspace;
+ __u32 fcc;
+ __u32 flags;
+
+ char name[32];
+
+ unsigned int nframes;
+ struct uvc_frame *frame;
+};
+
+struct uvc_streaming_header {
+ __u8 bNumFormats;
+ __u8 bEndpointAddress;
+ __u8 bTerminalLink;
+ __u8 bControlSize;
+ __u8 *bmaControls;
+ /* The following fields are used by input headers only. */
+ __u8 bmInfo;
+ __u8 bStillCaptureMethod;
+ __u8 bTriggerSupport;
+ __u8 bTriggerUsage;
+};
+
+struct uvc_streaming {
+ struct list_head list;
+
+ struct usb_interface *intf;
+ int intfnum;
+ __u16 maxpsize;
+
+ struct uvc_streaming_header header;
+
+ unsigned int nformats;
+ struct uvc_format *format;
+
+ struct uvc_streaming_control ctrl;
+ struct uvc_format *cur_format;
+ struct uvc_frame *cur_frame;
+
+ struct mutex mutex;
+};
+
+enum uvc_buffer_state {
+ UVC_BUF_STATE_IDLE = 0,
+ UVC_BUF_STATE_QUEUED = 1,
+ UVC_BUF_STATE_ACTIVE = 2,
+ UVC_BUF_STATE_DONE = 3,
+ UVC_BUF_STATE_ERROR = 4,
+};
+
+struct uvc_buffer {
+ unsigned long vma_use_count;
+ struct list_head stream;
+
+ /* Touched by interrupt handler. */
+ struct v4l2_buffer buf;
+ struct list_head queue;
+ wait_queue_head_t wait;
+ enum uvc_buffer_state state;
+};
+
+#define UVC_QUEUE_STREAMING (1 << 0)
+#define UVC_QUEUE_DISCONNECTED (1 << 1)
+#define UVC_QUEUE_DROP_INCOMPLETE (1 << 2)
+
+struct uvc_video_queue {
+ void *mem;
+ unsigned int flags;
+ __u32 sequence;
+
+ unsigned int count;
+ unsigned int buf_size;
+ struct uvc_buffer buffer[UVC_MAX_VIDEO_BUFFERS];
+ struct mutex mutex; /* protects buffers and mainqueue */
+ spinlock_t irqlock; /* protects irqqueue */
+
+ struct list_head mainqueue;
+ struct list_head irqqueue;
+};
+
+struct uvc_video_device {
+ struct uvc_device *dev;
+ struct video_device *vdev;
+ atomic_t active;
+ unsigned int frozen : 1;
+
+ struct list_head iterms;
+ struct uvc_entity *oterm;
+ struct uvc_entity *processing;
+ struct uvc_entity *selector;
+ struct list_head extensions;
+ struct mutex ctrl_mutex;
+
+ struct uvc_video_queue queue;
+
+ /* Video streaming object, must always be non-NULL. */
+ struct uvc_streaming *streaming;
+
+ void (*decode) (struct urb *urb, struct uvc_video_device *video,
+ struct uvc_buffer *buf);
+
+ /* Context data used by the bulk completion handler. */
+ struct {
+ __u8 header[256];
+ unsigned int header_size;
+ int skip_payload;
+ __u32 payload_size;
+ __u32 max_payload_size;
+ } bulk;
+
+ struct urb *urb[UVC_URBS];
+ char *urb_buffer[UVC_URBS];
+
+ __u8 last_fid;
+};
+
+enum uvc_device_state {
+ UVC_DEV_DISCONNECTED = 1,
+};
+
+struct uvc_device {
+ struct usb_device *udev;
+ struct usb_interface *intf;
+ __u32 quirks;
+ int intfnum;
+ char name[32];
+
+ enum uvc_device_state state;
+ struct kref kref;
+ struct list_head list;
+
+ /* Video control interface */
+ __u16 uvc_version;
+ __u32 clock_frequency;
+
+ struct list_head entities;
+
+ struct uvc_video_device video;
+
+ /* Status Interrupt Endpoint */
+ struct usb_host_endpoint *int_ep;
+ struct urb *int_urb;
+ __u8 status[16];
+ struct input_dev *input;
+
+ /* Video Streaming interfaces */
+ struct list_head streaming;
+};
+
+enum uvc_handle_state {
+ UVC_HANDLE_PASSIVE = 0,
+ UVC_HANDLE_ACTIVE = 1,
+};
+
+struct uvc_fh {
+ struct uvc_video_device *device;
+ enum uvc_handle_state state;
+};
+
+struct uvc_driver {
+ struct usb_driver driver;
+
+ struct mutex open_mutex; /* protects from open/disconnect race */
+
+ struct list_head devices; /* struct uvc_device list */
+ struct list_head controls; /* struct uvc_control_info list */
+ struct mutex ctrl_mutex; /* protects controls and devices
+ lists */
+};
+
+/* ------------------------------------------------------------------------
+ * Debugging, printing and logging
+ */
+
+#define UVC_TRACE_PROBE (1 << 0)
+#define UVC_TRACE_DESCR (1 << 1)
+#define UVC_TRACE_CONTROL (1 << 2)
+#define UVC_TRACE_FORMAT (1 << 3)
+#define UVC_TRACE_CAPTURE (1 << 4)
+#define UVC_TRACE_CALLS (1 << 5)
+#define UVC_TRACE_IOCTL (1 << 6)
+#define UVC_TRACE_FRAME (1 << 7)
+#define UVC_TRACE_SUSPEND (1 << 8)
+#define UVC_TRACE_STATUS (1 << 9)
+
+extern unsigned int uvc_trace_param;
+
+#define uvc_trace(flag, msg...) \
+ do { \
+ if (uvc_trace_param & flag) \
+ printk(KERN_DEBUG "uvcvideo: " msg); \
+ } while (0)
+
+#define uvc_printk(level, msg...) \
+ printk(level "uvcvideo: " msg)
+
+#define UVC_GUID_FORMAT "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-" \
+ "%02x%02x%02x%02x%02x%02x"
+#define UVC_GUID_ARGS(guid) \
+ (guid)[3], (guid)[2], (guid)[1], (guid)[0], \
+ (guid)[5], (guid)[4], \
+ (guid)[7], (guid)[6], \
+ (guid)[8], (guid)[9], \
+ (guid)[10], (guid)[11], (guid)[12], \
+ (guid)[13], (guid)[14], (guid)[15]
+
+/* --------------------------------------------------------------------------
+ * Internal functions.
+ */
+
+/* Core driver */
+extern struct uvc_driver uvc_driver;
+extern void uvc_delete(struct kref *kref);
+
+/* Video buffers queue management. */
+extern void uvc_queue_init(struct uvc_video_queue *queue);
+extern int uvc_alloc_buffers(struct uvc_video_queue *queue,
+ unsigned int nbuffers, unsigned int buflength);
+extern int uvc_free_buffers(struct uvc_video_queue *queue);
+extern int uvc_query_buffer(struct uvc_video_queue *queue,
+ struct v4l2_buffer *v4l2_buf);
+extern int uvc_queue_buffer(struct uvc_video_queue *queue,
+ struct v4l2_buffer *v4l2_buf);
+extern int uvc_dequeue_buffer(struct uvc_video_queue *queue,
+ struct v4l2_buffer *v4l2_buf, int nonblocking);
+extern int uvc_queue_enable(struct uvc_video_queue *queue, int enable);
+extern void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect);
+extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
+ struct uvc_buffer *buf);
+extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue,
+ struct file *file, poll_table *wait);
+static inline int uvc_queue_streaming(struct uvc_video_queue *queue)
+{
+ return queue->flags & UVC_QUEUE_STREAMING;
+}
+
+/* V4L2 interface */
+extern struct file_operations uvc_fops;
+
+/* Video */
+extern int uvc_video_init(struct uvc_video_device *video);
+extern int uvc_video_suspend(struct uvc_video_device *video);
+extern int uvc_video_resume(struct uvc_video_device *video);
+extern int uvc_video_enable(struct uvc_video_device *video, int enable);
+extern int uvc_probe_video(struct uvc_video_device *video,
+ struct uvc_streaming_control *probe);
+extern int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit,
+ __u8 intfnum, __u8 cs, void *data, __u16 size);
+extern int uvc_set_video_ctrl(struct uvc_video_device *video,
+ struct uvc_streaming_control *ctrl, int probe);
+
+/* Status */
+extern int uvc_status_init(struct uvc_device *dev);
+extern void uvc_status_cleanup(struct uvc_device *dev);
+extern int uvc_status_suspend(struct uvc_device *dev);
+extern int uvc_status_resume(struct uvc_device *dev);
+
+/* Controls */
+extern struct uvc_control *uvc_find_control(struct uvc_video_device *video,
+ __u32 v4l2_id, struct uvc_control_mapping **mapping);
+extern int uvc_query_v4l2_ctrl(struct uvc_video_device *video,
+ struct v4l2_queryctrl *v4l2_ctrl);
+
+extern int uvc_ctrl_add_info(struct uvc_control_info *info);
+extern int uvc_ctrl_add_mapping(struct uvc_control_mapping *mapping);
+extern int uvc_ctrl_init_device(struct uvc_device *dev);
+extern void uvc_ctrl_cleanup_device(struct uvc_device *dev);
+extern int uvc_ctrl_resume_device(struct uvc_device *dev);
+extern void uvc_ctrl_init(void);
+
+extern int uvc_ctrl_begin(struct uvc_video_device *video);
+extern int __uvc_ctrl_commit(struct uvc_video_device *video, int rollback);
+static inline int uvc_ctrl_commit(struct uvc_video_device *video)
+{
+ return __uvc_ctrl_commit(video, 0);
+}
+static inline int uvc_ctrl_rollback(struct uvc_video_device *video)
+{
+ return __uvc_ctrl_commit(video, 1);
+}
+
+extern int uvc_ctrl_get(struct uvc_video_device *video,
+ struct v4l2_ext_control *xctrl);
+extern int uvc_ctrl_set(struct uvc_video_device *video,
+ struct v4l2_ext_control *xctrl);
+
+extern int uvc_xu_ctrl_query(struct uvc_video_device *video,
+ struct uvc_xu_control *ctrl, int set);
+
+/* Utility functions */
+extern void uvc_simplify_fraction(uint32_t *numerator, uint32_t *denominator,
+ unsigned int n_terms, unsigned int threshold);
+extern uint32_t uvc_fraction_to_interval(uint32_t numerator,
+ uint32_t denominator);
+extern struct usb_host_endpoint *uvc_find_endpoint(
+ struct usb_host_interface *alts, __u8 epaddr);
+
+/* Quirks support */
+void uvc_video_decode_isight(struct urb *urb, struct uvc_video_device *video,
+ struct uvc_buffer *buf);
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c
index 31e8af0..67a661c 100644
--- a/drivers/media/video/videodev.c
+++ b/drivers/media/video/videodev.c
@@ -51,12 +51,51 @@
#define VIDEO_NUM_DEVICES 256
#define VIDEO_NAME "video4linux"
+struct std_descr {
+ v4l2_std_id std;
+ const char *descr;
+};
+
+static const struct std_descr standards[] = {
+ { V4L2_STD_NTSC, "NTSC" },
+ { V4L2_STD_NTSC_M, "NTSC-M" },
+ { V4L2_STD_NTSC_M_JP, "NTSC-M-JP" },
+ { V4L2_STD_NTSC_M_KR, "NTSC-M-KR" },
+ { V4L2_STD_NTSC_443, "NTSC-443" },
+ { V4L2_STD_PAL, "PAL" },
+ { V4L2_STD_PAL_BG, "PAL-BG" },
+ { V4L2_STD_PAL_B, "PAL-B" },
+ { V4L2_STD_PAL_B1, "PAL-B1" },
+ { V4L2_STD_PAL_G, "PAL-G" },
+ { V4L2_STD_PAL_H, "PAL-H" },
+ { V4L2_STD_PAL_I, "PAL-I" },
+ { V4L2_STD_PAL_DK, "PAL-DK" },
+ { V4L2_STD_PAL_D, "PAL-D" },
+ { V4L2_STD_PAL_D1, "PAL-D1" },
+ { V4L2_STD_PAL_K, "PAL-K" },
+ { V4L2_STD_PAL_M, "PAL-M" },
+ { V4L2_STD_PAL_N, "PAL-N" },
+ { V4L2_STD_PAL_Nc, "PAL-Nc" },
+ { V4L2_STD_PAL_60, "PAL-60" },
+ { V4L2_STD_SECAM, "SECAM" },
+ { V4L2_STD_SECAM_B, "SECAM-B" },
+ { V4L2_STD_SECAM_G, "SECAM-G" },
+ { V4L2_STD_SECAM_H, "SECAM-H" },
+ { V4L2_STD_SECAM_DK, "SECAM-DK" },
+ { V4L2_STD_SECAM_D, "SECAM-D" },
+ { V4L2_STD_SECAM_K, "SECAM-K" },
+ { V4L2_STD_SECAM_K1, "SECAM-K1" },
+ { V4L2_STD_SECAM_L, "SECAM-L" },
+ { V4L2_STD_SECAM_LC, "SECAM-Lc" },
+ { 0, "Unknown" }
+};
+
/* video4linux standard ID conversion to standard name
*/
-char *v4l2_norm_to_name(v4l2_std_id id)
+const char *v4l2_norm_to_name(v4l2_std_id id)
{
- char *name;
u32 myid = id;
+ int i;
/* HACK: ppc32 architecture doesn't have __ucmpdi2 function to handle
64 bit comparations. So, on that architecture, with some gcc
@@ -64,110 +103,17 @@
*/
BUG_ON(myid != id);
- switch (myid) {
- case V4L2_STD_PAL:
- name = "PAL";
- break;
- case V4L2_STD_PAL_BG:
- name = "PAL-BG";
- break;
- case V4L2_STD_PAL_DK:
- name = "PAL-DK";
- break;
- case V4L2_STD_PAL_B:
- name = "PAL-B";
- break;
- case V4L2_STD_PAL_B1:
- name = "PAL-B1";
- break;
- case V4L2_STD_PAL_G:
- name = "PAL-G";
- break;
- case V4L2_STD_PAL_H:
- name = "PAL-H";
- break;
- case V4L2_STD_PAL_I:
- name = "PAL-I";
- break;
- case V4L2_STD_PAL_D:
- name = "PAL-D";
- break;
- case V4L2_STD_PAL_D1:
- name = "PAL-D1";
- break;
- case V4L2_STD_PAL_K:
- name = "PAL-K";
- break;
- case V4L2_STD_PAL_M:
- name = "PAL-M";
- break;
- case V4L2_STD_PAL_N:
- name = "PAL-N";
- break;
- case V4L2_STD_PAL_Nc:
- name = "PAL-Nc";
- break;
- case V4L2_STD_PAL_60:
- name = "PAL-60";
- break;
- case V4L2_STD_NTSC:
- name = "NTSC";
- break;
- case V4L2_STD_NTSC_M:
- name = "NTSC-M";
- break;
- case V4L2_STD_NTSC_M_JP:
- name = "NTSC-M-JP";
- break;
- case V4L2_STD_NTSC_443:
- name = "NTSC-443";
- break;
- case V4L2_STD_NTSC_M_KR:
- name = "NTSC-M-KR";
- break;
- case V4L2_STD_SECAM:
- name = "SECAM";
- break;
- case V4L2_STD_SECAM_DK:
- name = "SECAM-DK";
- break;
- case V4L2_STD_SECAM_B:
- name = "SECAM-B";
- break;
- case V4L2_STD_SECAM_D:
- name = "SECAM-D";
- break;
- case V4L2_STD_SECAM_G:
- name = "SECAM-G";
- break;
- case V4L2_STD_SECAM_H:
- name = "SECAM-H";
- break;
- case V4L2_STD_SECAM_K:
- name = "SECAM-K";
- break;
- case V4L2_STD_SECAM_K1:
- name = "SECAM-K1";
- break;
- case V4L2_STD_SECAM_L:
- name = "SECAM-L";
- break;
- case V4L2_STD_SECAM_LC:
- name = "SECAM-LC";
- break;
- default:
- name = "Unknown";
- break;
- }
-
- return name;
+ for (i = 0; standards[i].std; i++)
+ if (myid == standards[i].std)
+ break;
+ return standards[i].descr;
}
EXPORT_SYMBOL(v4l2_norm_to_name);
/* Fill in the fields of a v4l2_standard structure according to the
'id' and 'transmission' parameters. Returns negative on error. */
int v4l2_video_std_construct(struct v4l2_standard *vs,
- int id, char *name)
+ int id, const char *name)
{
u32 index = vs->index;
@@ -1218,95 +1164,40 @@
case VIDIOC_ENUMSTD:
{
struct v4l2_standard *p = arg;
- v4l2_std_id id = vfd->tvnorms,curr_id=0;
- unsigned int index = p->index,i;
+ v4l2_std_id id = vfd->tvnorms, curr_id = 0;
+ unsigned int index = p->index, i, j = 0;
+ const char *descr = "";
- if (index<0) {
- ret=-EINVAL;
- break;
- }
-
- /* Return norm array on a canonical way */
- for (i=0;i<= index && id; i++) {
- if ( (id & V4L2_STD_PAL) == V4L2_STD_PAL) {
- curr_id = V4L2_STD_PAL;
- } else if ( (id & V4L2_STD_PAL_BG) == V4L2_STD_PAL_BG) {
- curr_id = V4L2_STD_PAL_BG;
- } else if ( (id & V4L2_STD_PAL_DK) == V4L2_STD_PAL_DK) {
- curr_id = V4L2_STD_PAL_DK;
- } else if ( (id & V4L2_STD_PAL_B) == V4L2_STD_PAL_B) {
- curr_id = V4L2_STD_PAL_B;
- } else if ( (id & V4L2_STD_PAL_B1) == V4L2_STD_PAL_B1) {
- curr_id = V4L2_STD_PAL_B1;
- } else if ( (id & V4L2_STD_PAL_G) == V4L2_STD_PAL_G) {
- curr_id = V4L2_STD_PAL_G;
- } else if ( (id & V4L2_STD_PAL_H) == V4L2_STD_PAL_H) {
- curr_id = V4L2_STD_PAL_H;
- } else if ( (id & V4L2_STD_PAL_I) == V4L2_STD_PAL_I) {
- curr_id = V4L2_STD_PAL_I;
- } else if ( (id & V4L2_STD_PAL_D) == V4L2_STD_PAL_D) {
- curr_id = V4L2_STD_PAL_D;
- } else if ( (id & V4L2_STD_PAL_D1) == V4L2_STD_PAL_D1) {
- curr_id = V4L2_STD_PAL_D1;
- } else if ( (id & V4L2_STD_PAL_K) == V4L2_STD_PAL_K) {
- curr_id = V4L2_STD_PAL_K;
- } else if ( (id & V4L2_STD_PAL_M) == V4L2_STD_PAL_M) {
- curr_id = V4L2_STD_PAL_M;
- } else if ( (id & V4L2_STD_PAL_N) == V4L2_STD_PAL_N) {
- curr_id = V4L2_STD_PAL_N;
- } else if ( (id & V4L2_STD_PAL_Nc) == V4L2_STD_PAL_Nc) {
- curr_id = V4L2_STD_PAL_Nc;
- } else if ( (id & V4L2_STD_PAL_60) == V4L2_STD_PAL_60) {
- curr_id = V4L2_STD_PAL_60;
- } else if ( (id & V4L2_STD_NTSC) == V4L2_STD_NTSC) {
- curr_id = V4L2_STD_NTSC;
- } else if ( (id & V4L2_STD_NTSC_M) == V4L2_STD_NTSC_M) {
- curr_id = V4L2_STD_NTSC_M;
- } else if ( (id & V4L2_STD_NTSC_M_JP) == V4L2_STD_NTSC_M_JP) {
- curr_id = V4L2_STD_NTSC_M_JP;
- } else if ( (id & V4L2_STD_NTSC_443) == V4L2_STD_NTSC_443) {
- curr_id = V4L2_STD_NTSC_443;
- } else if ( (id & V4L2_STD_NTSC_M_KR) == V4L2_STD_NTSC_M_KR) {
- curr_id = V4L2_STD_NTSC_M_KR;
- } else if ( (id & V4L2_STD_SECAM) == V4L2_STD_SECAM) {
- curr_id = V4L2_STD_SECAM;
- } else if ( (id & V4L2_STD_SECAM_DK) == V4L2_STD_SECAM_DK) {
- curr_id = V4L2_STD_SECAM_DK;
- } else if ( (id & V4L2_STD_SECAM_B) == V4L2_STD_SECAM_B) {
- curr_id = V4L2_STD_SECAM_B;
- } else if ( (id & V4L2_STD_SECAM_D) == V4L2_STD_SECAM_D) {
- curr_id = V4L2_STD_SECAM_D;
- } else if ( (id & V4L2_STD_SECAM_G) == V4L2_STD_SECAM_G) {
- curr_id = V4L2_STD_SECAM_G;
- } else if ( (id & V4L2_STD_SECAM_H) == V4L2_STD_SECAM_H) {
- curr_id = V4L2_STD_SECAM_H;
- } else if ( (id & V4L2_STD_SECAM_K) == V4L2_STD_SECAM_K) {
- curr_id = V4L2_STD_SECAM_K;
- } else if ( (id & V4L2_STD_SECAM_K1) == V4L2_STD_SECAM_K1) {
- curr_id = V4L2_STD_SECAM_K1;
- } else if ( (id & V4L2_STD_SECAM_L) == V4L2_STD_SECAM_L) {
- curr_id = V4L2_STD_SECAM_L;
- } else if ( (id & V4L2_STD_SECAM_LC) == V4L2_STD_SECAM_LC) {
- curr_id = V4L2_STD_SECAM_LC;
- } else {
+ /* Return norm array in a canonical way */
+ for (i = 0; i <= index && id; i++) {
+ /* last std value in the standards array is 0, so this
+ while always ends there since (id & 0) == 0. */
+ while ((id & standards[j].std) != standards[j].std)
+ j++;
+ curr_id = standards[j].std;
+ descr = standards[j].descr;
+ j++;
+ if (curr_id == 0)
break;
- }
- id &= ~curr_id;
+ if (curr_id != V4L2_STD_PAL &&
+ curr_id != V4L2_STD_SECAM &&
+ curr_id != V4L2_STD_NTSC)
+ id &= ~curr_id;
}
- if (i<=index)
+ if (i <= index)
return -EINVAL;
- v4l2_video_std_construct(p, curr_id,v4l2_norm_to_name(curr_id));
+ v4l2_video_std_construct(p, curr_id, descr);
p->index = index;
- dbgarg (cmd, "index=%d, id=%Ld, name=%s, fps=%d/%d, "
+ dbgarg(cmd, "index=%d, id=%Ld, name=%s, fps=%d/%d, "
"framelines=%d\n", p->index,
(unsigned long long)p->id, p->name,
p->frameperiod.numerator,
p->frameperiod.denominator,
p->framelines);
- ret=0;
+ ret = 0;
break;
}
case VIDIOC_G_STD:
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 845be18..5ff9a58 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -327,13 +327,14 @@
int hmax = buf->vb.height;
int wmax = buf->vb.width;
struct timeval ts;
- char *tmpbuf = kmalloc(wmax * 2, GFP_ATOMIC);
+ char *tmpbuf;
void *vbuf = videobuf_to_vmalloc(&buf->vb);
- if (!tmpbuf)
+ if (!vbuf)
return;
- if (!vbuf)
+ tmpbuf = kmalloc(wmax * 2, GFP_ATOMIC);
+ if (!tmpbuf)
return;
for (h = 0; h < hmax; h++) {
diff --git a/drivers/media/video/zoran.h b/drivers/media/video/zoran.h
index 81cc3b0..46b7ad4 100644
--- a/drivers/media/video/zoran.h
+++ b/drivers/media/video/zoran.h
@@ -285,7 +285,7 @@
struct zoran_jpg_buffer {
struct zoran_mapping *map;
- u32 *frag_tab; /* addresses of frag table */
+ __le32 *frag_tab; /* addresses of frag table */
u32 frag_tab_bus; /* same value cached to save time in ISR */
enum zoran_buffer_state state; /* non-zero if corresponding buffer is in use in grab queue */
struct zoran_sync bs; /* DONE: info to return to application */
@@ -450,7 +450,7 @@
unsigned long jpg_queued_num; /* count of frames queued since grab/play started */
/* zr36057's code buffer table */
- u32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */
+ __le32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */
/* (value & BUZ_MASK_FRAME) corresponds to index in pend[] queue */
int jpg_pend[BUZ_MAX_FRAME];
diff --git a/drivers/media/video/zoran_device.c b/drivers/media/video/zoran_device.c
index 37629ff..88d3697 100644
--- a/drivers/media/video/zoran_device.c
+++ b/drivers/media/video/zoran_device.c
@@ -1320,7 +1320,7 @@
if (i) {
/* Rotate stat_comm entries to make current entry first */
int j;
- u32 bus_addr[BUZ_NUM_STAT_COM];
+ __le32 bus_addr[BUZ_NUM_STAT_COM];
/* Here we are copying the stat_com array, which
* is already in little endian format, so
diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c
index 345c77e..5394d7a 100644
--- a/drivers/media/video/zoran_driver.c
+++ b/drivers/media/video/zoran_driver.c
@@ -495,7 +495,7 @@
jpg_fbuffer_free(file);
return -ENOBUFS;
}
- fh->jpg_buffers.buffer[i].frag_tab = (u32 *) mem;
+ fh->jpg_buffers.buffer[i].frag_tab = (__le32 *) mem;
fh->jpg_buffers.buffer[i].frag_tab_bus =
virt_to_bus((void *) mem);
@@ -1167,7 +1167,7 @@
/* v4l capture */
if (fh->v4l_buffers.active != ZORAN_FREE) {
- long flags;
+ unsigned long flags;
spin_lock_irqsave(&zr->spinlock, flags);
zr36057_set_memgrab(zr, 0);
@@ -3436,7 +3436,7 @@
/* unload capture */
if (zr->v4l_memgrab_active) {
- long flags;
+ unsigned long flags;
spin_lock_irqsave(&zr->spinlock, flags);
zr36057_set_memgrab(zr, 0);
@@ -4375,7 +4375,7 @@
mutex_lock(&zr->resource_lock);
if (fh->v4l_buffers.active != ZORAN_FREE) {
- long flags;
+ unsigned long flags;
spin_lock_irqsave(&zr->spinlock, flags);
zr36057_set_memgrab(zr, 0);
@@ -4506,7 +4506,7 @@
if (todo > fraglen)
todo = fraglen;
pos =
- le32_to_cpu((unsigned long) fh->jpg_buffers.
+ le32_to_cpu(fh->jpg_buffers.
buffer[i].frag_tab[2 * j]);
/* should just be pos on i386 */
page = virt_to_phys(bus_to_virt(pos))
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index db3c892..d40d6d1 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1686,9 +1686,14 @@
ioc->bus_type = SAS;
}
- if (ioc->bus_type == SAS && mpt_msi_enable == -1)
- ioc->msi_enable = 1;
- else
+ if (mpt_msi_enable == -1) {
+ /* Enable on SAS, disable on FC and SPI */
+ if (ioc->bus_type == SAS)
+ ioc->msi_enable = 1;
+ else
+ ioc->msi_enable = 0;
+ } else
+ /* follow flag: 0 - disable; 1 - enable */
ioc->msi_enable = mpt_msi_enable;
if (ioc->errata_flag_1064)
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index 3cdd4e9..1e24ab4 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -1238,8 +1238,6 @@
sh->max_id = ioc->pfacts->MaxDevices;
sh->max_lun = max_lun;
- sh->this_id = ioc->pfacts[0].PortSCSIID;
-
/* Required entry.
*/
sh->unique_id = ioc->id;
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 4684807..4d492ba 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -3193,8 +3193,6 @@
sh->transportt = mptsas_transport_template;
- sh->this_id = ioc->pfacts[0].PortSCSIID;
-
/* Required entry.
*/
sh->unique_id = ioc->id;
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index b109bd8..c68ef00 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -2451,12 +2451,6 @@
ioc->name, sdev->sdtr, sdev->wdtr,
sdev->ppr, sdev->inquiry_len));
- if (sdev->id > sh->max_id) {
- /* error case, should never happen */
- scsi_adjust_queue_depth(sdev, 0, 1);
- goto slave_configure_exit;
- }
-
vdevice->configured_lun = 1;
mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
@@ -2470,8 +2464,6 @@
ioc->name, vtarget->negoFlags, vtarget->maxOffset,
vtarget->minSyncFactor));
-slave_configure_exit:
-
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"tagged %d, simple %d, ordered %d\n",
ioc->name,sdev->tagged_supported, sdev->simple_tags,
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 25bcfcf..1effca4 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -1266,13 +1266,18 @@
static int
mptspi_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
{
- struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
int rc;
rc = mptscsih_ioc_reset(ioc, reset_phase);
- if (reset_phase == MPT_IOC_POST_RESET)
+ /* only try to do a renegotiation if we're properly set up
+ * if we get an ioc fault on bringup, ioc->sh will be NULL */
+ if (reset_phase == MPT_IOC_POST_RESET &&
+ ioc->sh) {
+ struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
+
mptspi_dv_renegotiate(hd);
+ }
return rc;
}
diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c
index e2e7c05..6d14e8f 100644
--- a/drivers/misc/fujitsu-laptop.c
+++ b/drivers/misc/fujitsu-laptop.c
@@ -352,3 +352,9 @@
MODULE_DESCRIPTION("Fujitsu laptop extras support");
MODULE_VERSION(FUJITSU_DRIVER_VERSION);
MODULE_LICENSE("GPL");
+
+static struct pnp_device_id pnp_ids[] = {
+ { .id = "FUJ02bf" },
+ { .id = "" }
+};
+MODULE_DEVICE_TABLE(pnp, pnp_ids);
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index fa39410..e4ff50b 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -102,7 +102,6 @@
#include <linux/nmi.h>
#include <linux/delay.h>
#include <linux/kthread.h>
-#include <linux/delay.h>
#define v1printk(a...) do { \
if (verbose) \
@@ -119,7 +118,6 @@
} while (0)
#define MAX_CONFIG_LEN 40
-static const char hexchars[] = "0123456789abcdef";
static struct kgdb_io kgdbts_io_ops;
static char get_buf[BUFMAX];
static int get_buf_cnt;
@@ -131,6 +129,8 @@
static int test_complete;
static int send_ack;
static int final_ack;
+static int force_hwbrks;
+static int hwbreaks_ok;
static int hw_break_val;
static int hw_break_val2;
#if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || defined(CONFIG_SPARC)
@@ -234,12 +234,12 @@
static void sw_break(char *arg)
{
- break_helper("Z0", arg, 0);
+ break_helper(force_hwbrks ? "Z1" : "Z0", arg, 0);
}
static void sw_rem_break(char *arg)
{
- break_helper("z0", arg, 0);
+ break_helper(force_hwbrks ? "z1" : "z0", arg, 0);
}
static void hw_break(char *arg)
@@ -619,8 +619,8 @@
count++;
}
strcat(get_buf, "#");
- get_buf[count + 2] = hexchars[checksum >> 4];
- get_buf[count + 3] = hexchars[checksum & 0xf];
+ get_buf[count + 2] = hex_asc_hi(checksum);
+ get_buf[count + 3] = hex_asc_lo(checksum);
get_buf[count + 4] = '\0';
v2printk("get%i: %s\n", ts.idx, get_buf);
}
@@ -781,6 +781,8 @@
return;
eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+ if (is_hw_breakpoint)
+ hwbreaks_ok = 0;
}
static void run_hw_break_test(int is_write_test)
@@ -798,9 +800,11 @@
kgdb_breakpoint();
hw_break_val_access();
if (is_write_test) {
- if (test_complete == 2)
+ if (test_complete == 2) {
eprintk("kgdbts: ERROR %s broke on access\n",
ts.name);
+ hwbreaks_ok = 0;
+ }
hw_break_val_write();
}
kgdb_breakpoint();
@@ -809,6 +813,7 @@
return;
eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+ hwbreaks_ok = 0;
}
static void run_nmi_sleep_test(int nmi_sleep)
@@ -912,6 +917,7 @@
/* All HW break point tests */
if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) {
+ hwbreaks_ok = 1;
v1printk("kgdbts:RUN hw breakpoint test\n");
run_breakpoint_test(1);
v1printk("kgdbts:RUN hw write breakpoint test\n");
@@ -925,6 +931,19 @@
run_nmi_sleep_test(nmi_sleep);
}
+#ifdef CONFIG_DEBUG_RODATA
+ /* Until there is an api to write to read-only text segments, use
+ * HW breakpoints for the remainder of any tests, else print a
+ * failure message if hw breakpoints do not work.
+ */
+ if (!(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT && hwbreaks_ok)) {
+ eprintk("kgdbts: HW breakpoints do not work,"
+ "skipping remaining tests\n");
+ return;
+ }
+ force_hwbrks = 1;
+#endif /* CONFIG_DEBUG_RODATA */
+
/* If the do_fork test is run it will be the last test that is
* executed because a kernel thread will be spawned at the very
* end to unregister the debug hooks.
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index a0ce0b2..b596929 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -1293,7 +1293,7 @@
mutex_lock(&tpacpi_inputdev_send_mutex);
input_report_switch(tpacpi_inputdev,
- SW_RADIO, !!wlsw);
+ SW_RFKILL_ALL, !!wlsw);
input_sync(tpacpi_inputdev);
mutex_unlock(&tpacpi_inputdev_send_mutex);
@@ -1921,6 +1921,29 @@
&dev_attr_hotkey_wakeup_hotunplug_complete.attr,
};
+static void hotkey_exit(void)
+{
+#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
+ hotkey_poll_stop_sync();
+#endif
+
+ if (hotkey_dev_attributes)
+ delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj);
+
+ kfree(hotkey_keycode_map);
+
+ if (tp_features.hotkey) {
+ dbg_printk(TPACPI_DBG_EXIT,
+ "restoring original hot key mask\n");
+ /* no short-circuit boolean operator below! */
+ if ((hotkey_mask_set(hotkey_orig_mask) |
+ hotkey_status_set(hotkey_orig_status)) != 0)
+ printk(TPACPI_ERR
+ "failed to restore hot key mask "
+ "to BIOS defaults\n");
+ }
+}
+
static int __init hotkey_init(struct ibm_init_struct *iibm)
{
/* Requirements for changing the default keymaps:
@@ -2060,226 +2083,220 @@
vdbg_printk(TPACPI_DBG_INIT, "hotkeys are %s\n",
str_supported(tp_features.hotkey));
- if (tp_features.hotkey) {
- hotkey_dev_attributes = create_attr_set(13, NULL);
- if (!hotkey_dev_attributes)
- return -ENOMEM;
- res = add_many_to_attr_set(hotkey_dev_attributes,
- hotkey_attributes,
- ARRAY_SIZE(hotkey_attributes));
+ if (!tp_features.hotkey)
+ return 1;
+
+ hotkey_dev_attributes = create_attr_set(13, NULL);
+ if (!hotkey_dev_attributes)
+ return -ENOMEM;
+ res = add_many_to_attr_set(hotkey_dev_attributes,
+ hotkey_attributes,
+ ARRAY_SIZE(hotkey_attributes));
+ if (res)
+ goto err_exit;
+
+ /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
+ A30, R30, R31, T20-22, X20-21, X22-24. Detected by checking
+ for HKEY interface version 0x100 */
+ if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
+ if ((hkeyv >> 8) != 1) {
+ printk(TPACPI_ERR "unknown version of the "
+ "HKEY interface: 0x%x\n", hkeyv);
+ printk(TPACPI_ERR "please report this to %s\n",
+ TPACPI_MAIL);
+ } else {
+ /*
+ * MHKV 0x100 in A31, R40, R40e,
+ * T4x, X31, and later
+ */
+ tp_features.hotkey_mask = 1;
+ }
+ }
+
+ vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n",
+ str_supported(tp_features.hotkey_mask));
+
+ if (tp_features.hotkey_mask) {
+ if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
+ "MHKA", "qd")) {
+ printk(TPACPI_ERR
+ "missing MHKA handler, "
+ "please report this to %s\n",
+ TPACPI_MAIL);
+ /* FN+F12, FN+F4, FN+F3 */
+ hotkey_all_mask = 0x080cU;
+ }
+ }
+
+ /* hotkey_source_mask *must* be zero for
+ * the first hotkey_mask_get */
+ res = hotkey_status_get(&hotkey_orig_status);
+ if (res)
+ goto err_exit;
+
+ if (tp_features.hotkey_mask) {
+ res = hotkey_mask_get();
if (res)
- return res;
+ goto err_exit;
- /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
- A30, R30, R31, T20-22, X20-21, X22-24. Detected by checking
- for HKEY interface version 0x100 */
- if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
- if ((hkeyv >> 8) != 1) {
- printk(TPACPI_ERR "unknown version of the "
- "HKEY interface: 0x%x\n", hkeyv);
- printk(TPACPI_ERR "please report this to %s\n",
- TPACPI_MAIL);
- } else {
- /*
- * MHKV 0x100 in A31, R40, R40e,
- * T4x, X31, and later
- */
- tp_features.hotkey_mask = 1;
- }
- }
-
- vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n",
- str_supported(tp_features.hotkey_mask));
-
- if (tp_features.hotkey_mask) {
- if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
- "MHKA", "qd")) {
- printk(TPACPI_ERR
- "missing MHKA handler, "
- "please report this to %s\n",
- TPACPI_MAIL);
- /* FN+F12, FN+F4, FN+F3 */
- hotkey_all_mask = 0x080cU;
- }
- }
-
- /* hotkey_source_mask *must* be zero for
- * the first hotkey_mask_get */
- res = hotkey_status_get(&hotkey_orig_status);
- if (!res && tp_features.hotkey_mask) {
- res = hotkey_mask_get();
- hotkey_orig_mask = hotkey_mask;
- if (!res) {
- res = add_many_to_attr_set(
- hotkey_dev_attributes,
- hotkey_mask_attributes,
- ARRAY_SIZE(hotkey_mask_attributes));
- }
- }
+ hotkey_orig_mask = hotkey_mask;
+ res = add_many_to_attr_set(
+ hotkey_dev_attributes,
+ hotkey_mask_attributes,
+ ARRAY_SIZE(hotkey_mask_attributes));
+ if (res)
+ goto err_exit;
+ }
#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
- if (tp_features.hotkey_mask) {
- hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
- & ~hotkey_all_mask;
- } else {
- hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK;
- }
+ if (tp_features.hotkey_mask) {
+ hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
+ & ~hotkey_all_mask;
+ } else {
+ hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK;
+ }
- vdbg_printk(TPACPI_DBG_INIT,
- "hotkey source mask 0x%08x, polling freq %d\n",
- hotkey_source_mask, hotkey_poll_freq);
+ vdbg_printk(TPACPI_DBG_INIT,
+ "hotkey source mask 0x%08x, polling freq %d\n",
+ hotkey_source_mask, hotkey_poll_freq);
#endif
- /* Not all thinkpads have a hardware radio switch */
- if (!res && acpi_evalf(hkey_handle, &status, "WLSW", "qd")) {
- tp_features.hotkey_wlsw = 1;
- printk(TPACPI_INFO
- "radio switch found; radios are %s\n",
- enabled(status, 0));
- res = add_to_attr_set(hotkey_dev_attributes,
- &dev_attr_hotkey_radio_sw.attr);
- }
+ /* Not all thinkpads have a hardware radio switch */
+ if (acpi_evalf(hkey_handle, &status, "WLSW", "qd")) {
+ tp_features.hotkey_wlsw = 1;
+ printk(TPACPI_INFO
+ "radio switch found; radios are %s\n",
+ enabled(status, 0));
+ res = add_to_attr_set(hotkey_dev_attributes,
+ &dev_attr_hotkey_radio_sw.attr);
+ }
- /* For X41t, X60t, X61t Tablets... */
- if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) {
- tp_features.hotkey_tablet = 1;
- printk(TPACPI_INFO
- "possible tablet mode switch found; "
- "ThinkPad in %s mode\n",
- (status & TP_HOTKEY_TABLET_MASK)?
- "tablet" : "laptop");
- res = add_to_attr_set(hotkey_dev_attributes,
- &dev_attr_hotkey_tablet_mode.attr);
- }
+ /* For X41t, X60t, X61t Tablets... */
+ if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) {
+ tp_features.hotkey_tablet = 1;
+ printk(TPACPI_INFO
+ "possible tablet mode switch found; "
+ "ThinkPad in %s mode\n",
+ (status & TP_HOTKEY_TABLET_MASK)?
+ "tablet" : "laptop");
+ res = add_to_attr_set(hotkey_dev_attributes,
+ &dev_attr_hotkey_tablet_mode.attr);
+ }
- if (!res)
- res = register_attr_set_with_sysfs(
- hotkey_dev_attributes,
- &tpacpi_pdev->dev.kobj);
- if (res)
- return res;
+ if (!res)
+ res = register_attr_set_with_sysfs(
+ hotkey_dev_attributes,
+ &tpacpi_pdev->dev.kobj);
+ if (res)
+ goto err_exit;
- /* Set up key map */
+ /* Set up key map */
- hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE,
- GFP_KERNEL);
- if (!hotkey_keycode_map) {
- printk(TPACPI_ERR
- "failed to allocate memory for key map\n");
- return -ENOMEM;
- }
+ hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE,
+ GFP_KERNEL);
+ if (!hotkey_keycode_map) {
+ printk(TPACPI_ERR
+ "failed to allocate memory for key map\n");
+ res = -ENOMEM;
+ goto err_exit;
+ }
- if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) {
- dbg_printk(TPACPI_DBG_INIT,
- "using Lenovo default hot key map\n");
- memcpy(hotkey_keycode_map, &lenovo_keycode_map,
- TPACPI_HOTKEY_MAP_SIZE);
+ if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) {
+ dbg_printk(TPACPI_DBG_INIT,
+ "using Lenovo default hot key map\n");
+ memcpy(hotkey_keycode_map, &lenovo_keycode_map,
+ TPACPI_HOTKEY_MAP_SIZE);
+ } else {
+ dbg_printk(TPACPI_DBG_INIT,
+ "using IBM default hot key map\n");
+ memcpy(hotkey_keycode_map, &ibm_keycode_map,
+ TPACPI_HOTKEY_MAP_SIZE);
+ }
+
+ set_bit(EV_KEY, tpacpi_inputdev->evbit);
+ set_bit(EV_MSC, tpacpi_inputdev->evbit);
+ set_bit(MSC_SCAN, tpacpi_inputdev->mscbit);
+ tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE;
+ tpacpi_inputdev->keycodemax = TPACPI_HOTKEY_MAP_LEN;
+ tpacpi_inputdev->keycode = hotkey_keycode_map;
+ for (i = 0; i < TPACPI_HOTKEY_MAP_LEN; i++) {
+ if (hotkey_keycode_map[i] != KEY_RESERVED) {
+ set_bit(hotkey_keycode_map[i],
+ tpacpi_inputdev->keybit);
} else {
- dbg_printk(TPACPI_DBG_INIT,
- "using IBM default hot key map\n");
- memcpy(hotkey_keycode_map, &ibm_keycode_map,
- TPACPI_HOTKEY_MAP_SIZE);
+ if (i < sizeof(hotkey_reserved_mask)*8)
+ hotkey_reserved_mask |= 1 << i;
}
-
- set_bit(EV_KEY, tpacpi_inputdev->evbit);
- set_bit(EV_MSC, tpacpi_inputdev->evbit);
- set_bit(MSC_SCAN, tpacpi_inputdev->mscbit);
- tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE;
- tpacpi_inputdev->keycodemax = TPACPI_HOTKEY_MAP_LEN;
- tpacpi_inputdev->keycode = hotkey_keycode_map;
- for (i = 0; i < TPACPI_HOTKEY_MAP_LEN; i++) {
- if (hotkey_keycode_map[i] != KEY_RESERVED) {
- set_bit(hotkey_keycode_map[i],
- tpacpi_inputdev->keybit);
- } else {
- if (i < sizeof(hotkey_reserved_mask)*8)
- hotkey_reserved_mask |= 1 << i;
- }
- }
-
- if (tp_features.hotkey_wlsw) {
- set_bit(EV_SW, tpacpi_inputdev->evbit);
- set_bit(SW_RADIO, tpacpi_inputdev->swbit);
- }
- if (tp_features.hotkey_tablet) {
- set_bit(EV_SW, tpacpi_inputdev->evbit);
- set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit);
- }
-
- /* Do not issue duplicate brightness change events to
- * userspace */
- if (!tp_features.bright_acpimode)
- /* update bright_acpimode... */
- tpacpi_check_std_acpi_brightness_support();
-
- if (tp_features.bright_acpimode) {
- printk(TPACPI_INFO
- "This ThinkPad has standard ACPI backlight "
- "brightness control, supported by the ACPI "
- "video driver\n");
- printk(TPACPI_NOTICE
- "Disabling thinkpad-acpi brightness events "
- "by default...\n");
-
- /* The hotkey_reserved_mask change below is not
- * necessary while the keys are at KEY_RESERVED in the
- * default map, but better safe than sorry, leave it
- * here as a marker of what we have to do, especially
- * when we finally become able to set this at runtime
- * on response to X.org requests */
- hotkey_reserved_mask |=
- (1 << TP_ACPI_HOTKEYSCAN_FNHOME)
- | (1 << TP_ACPI_HOTKEYSCAN_FNEND);
- }
-
- dbg_printk(TPACPI_DBG_INIT,
- "enabling hot key handling\n");
- res = hotkey_status_set(1);
- if (res)
- return res;
- res = hotkey_mask_set(((hotkey_all_mask | hotkey_source_mask)
- & ~hotkey_reserved_mask)
- | hotkey_orig_mask);
- if (res < 0 && res != -ENXIO)
- return res;
-
- dbg_printk(TPACPI_DBG_INIT,
- "legacy hot key reporting over procfs %s\n",
- (hotkey_report_mode < 2) ?
- "enabled" : "disabled");
-
- tpacpi_inputdev->open = &hotkey_inputdev_open;
- tpacpi_inputdev->close = &hotkey_inputdev_close;
-
- hotkey_poll_setup_safe(1);
- tpacpi_input_send_radiosw();
- tpacpi_input_send_tabletsw();
}
- return (tp_features.hotkey)? 0 : 1;
-}
-
-static void hotkey_exit(void)
-{
-#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
- hotkey_poll_stop_sync();
-#endif
-
- if (tp_features.hotkey) {
- dbg_printk(TPACPI_DBG_EXIT,
- "restoring original hot key mask\n");
- /* no short-circuit boolean operator below! */
- if ((hotkey_mask_set(hotkey_orig_mask) |
- hotkey_status_set(hotkey_orig_status)) != 0)
- printk(TPACPI_ERR
- "failed to restore hot key mask "
- "to BIOS defaults\n");
+ if (tp_features.hotkey_wlsw) {
+ set_bit(EV_SW, tpacpi_inputdev->evbit);
+ set_bit(SW_RFKILL_ALL, tpacpi_inputdev->swbit);
+ }
+ if (tp_features.hotkey_tablet) {
+ set_bit(EV_SW, tpacpi_inputdev->evbit);
+ set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit);
}
- if (hotkey_dev_attributes) {
- delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj);
- hotkey_dev_attributes = NULL;
+ /* Do not issue duplicate brightness change events to
+ * userspace */
+ if (!tp_features.bright_acpimode)
+ /* update bright_acpimode... */
+ tpacpi_check_std_acpi_brightness_support();
+
+ if (tp_features.bright_acpimode) {
+ printk(TPACPI_INFO
+ "This ThinkPad has standard ACPI backlight "
+ "brightness control, supported by the ACPI "
+ "video driver\n");
+ printk(TPACPI_NOTICE
+ "Disabling thinkpad-acpi brightness events "
+ "by default...\n");
+
+ /* The hotkey_reserved_mask change below is not
+ * necessary while the keys are at KEY_RESERVED in the
+ * default map, but better safe than sorry, leave it
+ * here as a marker of what we have to do, especially
+ * when we finally become able to set this at runtime
+ * on response to X.org requests */
+ hotkey_reserved_mask |=
+ (1 << TP_ACPI_HOTKEYSCAN_FNHOME)
+ | (1 << TP_ACPI_HOTKEYSCAN_FNEND);
}
+
+ dbg_printk(TPACPI_DBG_INIT, "enabling hot key handling\n");
+ res = hotkey_status_set(1);
+ if (res) {
+ hotkey_exit();
+ return res;
+ }
+ res = hotkey_mask_set(((hotkey_all_mask | hotkey_source_mask)
+ & ~hotkey_reserved_mask)
+ | hotkey_orig_mask);
+ if (res < 0 && res != -ENXIO) {
+ hotkey_exit();
+ return res;
+ }
+
+ dbg_printk(TPACPI_DBG_INIT,
+ "legacy hot key reporting over procfs %s\n",
+ (hotkey_report_mode < 2) ?
+ "enabled" : "disabled");
+
+ tpacpi_inputdev->open = &hotkey_inputdev_open;
+ tpacpi_inputdev->close = &hotkey_inputdev_close;
+
+ hotkey_poll_setup_safe(1);
+ tpacpi_input_send_radiosw();
+ tpacpi_input_send_tabletsw();
+
+ return 0;
+
+err_exit:
+ delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj);
+ hotkey_dev_attributes = NULL;
+
+ return (res < 0)? res : 1;
}
static void hotkey_notify(struct ibm_struct *ibm, u32 event)
@@ -3319,7 +3336,7 @@
static int __init light_init(struct ibm_init_struct *iibm)
{
- int rc = 0;
+ int rc;
vdbg_printk(TPACPI_DBG_INIT, "initializing light subdriver\n");
@@ -3337,20 +3354,23 @@
tp_features.light_status =
acpi_evalf(ec_handle, NULL, "KBLT", "qv");
- vdbg_printk(TPACPI_DBG_INIT, "light is %s\n",
- str_supported(tp_features.light));
+ vdbg_printk(TPACPI_DBG_INIT, "light is %s, light status is %s\n",
+ str_supported(tp_features.light),
+ str_supported(tp_features.light_status));
- if (tp_features.light) {
- rc = led_classdev_register(&tpacpi_pdev->dev,
- &tpacpi_led_thinklight.led_classdev);
- }
+ if (!tp_features.light)
+ return 1;
+
+ rc = led_classdev_register(&tpacpi_pdev->dev,
+ &tpacpi_led_thinklight.led_classdev);
if (rc < 0) {
tp_features.light = 0;
tp_features.light_status = 0;
- } else {
- rc = (tp_features.light)? 0 : 1;
+ } else {
+ rc = 0;
}
+
return rc;
}
@@ -3833,7 +3853,7 @@
"tpacpi::standby",
};
-static int led_get_status(unsigned int led)
+static int led_get_status(const unsigned int led)
{
int status;
enum led_status_t led_s;
@@ -3857,41 +3877,42 @@
/* not reached */
}
-static int led_set_status(unsigned int led, enum led_status_t ledstatus)
+static int led_set_status(const unsigned int led,
+ const enum led_status_t ledstatus)
{
/* off, on, blink. Index is led_status_t */
- static const int led_sled_arg1[] = { 0, 1, 3 };
- static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */
- static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */
- static const int led_led_arg1[] = { 0, 0x80, 0xc0 };
+ static const unsigned int led_sled_arg1[] = { 0, 1, 3 };
+ static const unsigned int led_led_arg1[] = { 0, 0x80, 0xc0 };
int rc = 0;
switch (led_supported) {
case TPACPI_LED_570:
- /* 570 */
- led = 1 << led;
- if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
- led, led_sled_arg1[ledstatus]))
- rc = -EIO;
- break;
+ /* 570 */
+ if (led > 7)
+ return -EINVAL;
+ if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
+ (1 << led), led_sled_arg1[ledstatus]))
+ rc = -EIO;
+ break;
case TPACPI_LED_OLD:
- /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
- led = 1 << led;
- rc = ec_write(TPACPI_LED_EC_HLMS, led);
- if (rc >= 0)
- rc = ec_write(TPACPI_LED_EC_HLBL,
- led * led_exp_hlbl[ledstatus]);
- if (rc >= 0)
- rc = ec_write(TPACPI_LED_EC_HLCL,
- led * led_exp_hlcl[ledstatus]);
- break;
+ /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
+ if (led > 7)
+ return -EINVAL;
+ rc = ec_write(TPACPI_LED_EC_HLMS, (1 << led));
+ if (rc >= 0)
+ rc = ec_write(TPACPI_LED_EC_HLBL,
+ (ledstatus == TPACPI_LED_BLINK) << led);
+ if (rc >= 0)
+ rc = ec_write(TPACPI_LED_EC_HLCL,
+ (ledstatus != TPACPI_LED_OFF) << led);
+ break;
case TPACPI_LED_NEW:
- /* all others */
- if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
- led, led_led_arg1[ledstatus]))
- rc = -EIO;
- break;
+ /* all others */
+ if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
+ led, led_led_arg1[ledstatus]))
+ rc = -EIO;
+ break;
default:
rc = -ENXIO;
}
@@ -3978,7 +3999,6 @@
}
kfree(tpacpi_leds);
- tpacpi_leds = NULL;
}
static int __init led_init(struct ibm_init_struct *iibm)
@@ -4802,7 +4822,6 @@
vdbg_printk(TPACPI_DBG_EXIT,
"calling backlight_device_unregister()\n");
backlight_device_unregister(ibm_backlight_device);
- ibm_backlight_device = NULL;
}
}
@@ -5764,11 +5783,16 @@
fan_control_access_mode != TPACPI_FAN_WR_NONE) {
rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj,
&fan_attr_group);
- if (!(rc < 0))
- rc = driver_create_file(&tpacpi_hwmon_pdriver.driver,
- &driver_attr_fan_watchdog);
if (rc < 0)
return rc;
+
+ rc = driver_create_file(&tpacpi_hwmon_pdriver.driver,
+ &driver_attr_fan_watchdog);
+ if (rc < 0) {
+ sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj,
+ &fan_attr_group);
+ return rc;
+ }
return 0;
} else
return 1;
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 91ded3e..f9ad960 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -46,7 +46,7 @@
#define MMC_SHIFT 3
#define MMC_NUM_MINORS (256 >> MMC_SHIFT)
-static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))];
+static DECLARE_BITMAP(dev_use, MMC_NUM_MINORS);
/*
* There is one mmc_blk_data per slot.
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 65210fc..d89475d 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -114,6 +114,7 @@
unsigned int nob = data->blocks;
unsigned long long clks;
unsigned int timeout;
+ bool dalgn = 0;
u32 dcmd;
int i;
@@ -152,6 +153,9 @@
host->sg_cpu[i].dcmd = dcmd | length;
if (length & 31 && !(data->flags & MMC_DATA_READ))
host->sg_cpu[i].dcmd |= DCMD_ENDIRQEN;
+ /* Not aligned to 8-byte boundary? */
+ if (sg_dma_address(&data->sg[i]) & 0x7)
+ dalgn = 1;
if (data->flags & MMC_DATA_READ) {
host->sg_cpu[i].dsadr = host->res->start + MMC_RXFIFO;
host->sg_cpu[i].dtadr = sg_dma_address(&data->sg[i]);
@@ -165,6 +169,15 @@
host->sg_cpu[host->dma_len - 1].ddadr = DDADR_STOP;
wmb();
+ /*
+ * The PXA27x DMA controller encounters overhead when working with
+ * unaligned (to 8-byte boundaries) data, so switch on byte alignment
+ * mode only if we have unaligned data.
+ */
+ if (dalgn)
+ DALGN |= (1 << host->dma);
+ else
+ DALGN &= (1 << host->dma);
DDADR(host->dma) = host->sg_dma;
DCSR(host->dma) = DCSR_RUN;
}
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 07c2048..b413aa6 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -55,6 +55,10 @@
#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<7)
/* Controller needs to be reset after each request to stay stable */
#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8)
+/* Controller needs voltage and power writes to happen separately */
+#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<9)
+/* Controller has an off-by-one issue with timeout value */
+#define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL (1<<10)
static const struct pci_device_id pci_ids[] __devinitdata = {
{
@@ -115,7 +119,8 @@
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
- SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS,
+ SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS |
+ SDHCI_QUIRK_BROKEN_DMA,
},
{
@@ -124,7 +129,17 @@
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
- SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS,
+ SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS |
+ SDHCI_QUIRK_BROKEN_DMA,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_MARVELL,
+ .device = PCI_DEVICE_ID_MARVELL_CAFE_SD,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
+ SDHCI_QUIRK_INCR_TIMEOUT_CONTROL,
},
{
@@ -469,6 +484,13 @@
break;
}
+ /*
+ * Compensate for an off-by-one error in the CaFe hardware; otherwise,
+ * a too-small count gives us interrupt timeouts.
+ */
+ if ((host->chip->quirks & SDHCI_QUIRK_INCR_TIMEOUT_CONTROL))
+ count++;
+
if (count >= 0xF) {
printk(KERN_WARNING "%s: Too large timeout requested!\n",
mmc_hostname(host->mmc));
@@ -774,6 +796,14 @@
BUG();
}
+ /*
+ * At least the CaFe chip gets confused if we set the voltage
+ * and set turn on power at the same time, so set the voltage first.
+ */
+ if ((host->chip->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
+ writeb(pwr & ~SDHCI_POWER_ON,
+ host->ioaddr + SDHCI_POWER_CONTROL);
+
writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
out:
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index be624a0..c303e7f 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -1457,17 +1457,7 @@
int ret;
/*
- * Allocate interrupt.
- */
-
- ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host);
- if (ret)
- return ret;
-
- host->irq = irq;
-
- /*
- * Set up tasklets.
+ * Set up tasklets. Must be done before requesting interrupt.
*/
tasklet_init(&host->card_tasklet, wbsd_tasklet_card,
(unsigned long)host);
@@ -1480,6 +1470,15 @@
tasklet_init(&host->finish_tasklet, wbsd_tasklet_finish,
(unsigned long)host);
+ /*
+ * Allocate interrupt.
+ */
+ ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host);
+ if (ret)
+ return ret;
+
+ host->irq = irq;
+
return 0;
}
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 25efd33..b402269 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -346,8 +346,10 @@
mutex_lock(&flash->lock);
/* Wait until finished previous write command. */
- if (wait_till_ready(flash))
+ if (wait_till_ready(flash)) {
+ mutex_unlock(&flash->lock);
return 1;
+ }
write_enable(flash);
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
index 240b0e2..c12d805 100644
--- a/drivers/mtd/maps/omap_nor.c
+++ b/drivers/mtd/maps/omap_nor.c
@@ -110,7 +110,7 @@
err = parse_mtd_partitions(info->mtd, part_probes, &info->parts, 0);
if (err > 0)
add_mtd_partitions(info->mtd, info->parts, err);
- else if (err < 0 && pdata->parts)
+ else if (err <= 0 && pdata->parts)
add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts);
else
#endif
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index fceb468..fe2bc7e 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1216,7 +1216,7 @@
clk_enable(info->clk);
- return pxa3xx_nand_config_flash(info);
+ return pxa3xx_nand_config_flash(info, info->flash_info);
}
#else
#define pxa3xx_nand_suspend NULL
diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c
index 3d44d04..ad81ab8 100644
--- a/drivers/mtd/onenand/generic.c
+++ b/drivers/mtd/onenand/generic.c
@@ -76,7 +76,7 @@
err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
if (err > 0)
add_mtd_partitions(&info->mtd, info->parts, err);
- else if (err < 0 && pdata->parts)
+ else if (err <= 0 && pdata->parts)
add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts);
else
#endif
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index 4747490..c5030f9 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -295,5 +295,5 @@
module_exit(redboot_parser_exit);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
MODULE_DESCRIPTION("Parsing code for RedBoot Flash Image System (FIS) tables");
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 2edda8c..aabad8c 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -1768,9 +1768,10 @@
case XCVR_MII: case XCVR_NWAY:
{
ok = 1;
- spin_lock_bh(&vp->lock);
+ /* Interrupts are already disabled */
+ spin_lock(&vp->lock);
vortex_check_media(dev, 0);
- spin_unlock_bh(&vp->lock);
+ spin_unlock(&vp->lock);
}
break;
default: /* Other media types handled by Tx timeouts. */
diff --git a/drivers/net/7990.c b/drivers/net/7990.c
index 750a46f..ad6b8a5 100644
--- a/drivers/net/7990.c
+++ b/drivers/net/7990.c
@@ -506,6 +506,7 @@
return res;
}
+EXPORT_SYMBOL_GPL(lance_open);
int lance_close (struct net_device *dev)
{
@@ -521,6 +522,7 @@
return 0;
}
+EXPORT_SYMBOL_GPL(lance_close);
void lance_tx_timeout(struct net_device *dev)
{
@@ -529,7 +531,7 @@
dev->trans_start = jiffies;
netif_wake_queue (dev);
}
-
+EXPORT_SYMBOL_GPL(lance_tx_timeout);
int lance_start_xmit (struct sk_buff *skb, struct net_device *dev)
{
@@ -586,6 +588,7 @@
return 0;
}
+EXPORT_SYMBOL_GPL(lance_start_xmit);
/* taken from the depca driver via a2065.c */
static void lance_load_multicast (struct net_device *dev)
@@ -654,6 +657,7 @@
if (!stopped)
netif_start_queue (dev);
}
+EXPORT_SYMBOL_GPL(lance_set_multicast);
#ifdef CONFIG_NET_POLL_CONTROLLER
void lance_poll(struct net_device *dev)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index dd0ec9e..f4182cf 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2426,7 +2426,7 @@
config EHEA
tristate "eHEA Ethernet support"
- depends on IBMEBUS && INET && SPARSEMEM && MEMORY_HOTPLUG
+ depends on IBMEBUS && INET && SPARSEMEM
select INET_LRO
---help---
This driver supports the IBM pSeries eHEA ethernet adapter.
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 6e4c80d..3c798ae 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -471,7 +471,6 @@
memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
return 0;
}
- return 1;
}
/* see if SPI FLAGS exist ? */
@@ -637,22 +636,6 @@
}
/*
- * Force the PHY into power saving mode using vendor magic.
- */
-#ifdef CONFIG_PM
-static void atl1_phy_enter_power_saving(struct atl1_hw *hw)
-{
- atl1_write_phy_reg(hw, MII_DBG_ADDR, 0);
- atl1_write_phy_reg(hw, MII_DBG_DATA, 0x124E);
- atl1_write_phy_reg(hw, MII_DBG_ADDR, 2);
- atl1_write_phy_reg(hw, MII_DBG_DATA, 0x3000);
- atl1_write_phy_reg(hw, MII_DBG_ADDR, 3);
- atl1_write_phy_reg(hw, MII_DBG_DATA, 0);
-
-}
-#endif
-
-/*
* Resets the PHY and make all config validate
* hw - Struct containing variables accessed by shared code
*
@@ -2023,6 +2006,7 @@
/* Good Receive */
pci_unmap_page(adapter->pdev, buffer_info->dma,
buffer_info->length, PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
skb = buffer_info->skb;
length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size);
@@ -2859,7 +2843,6 @@
ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
- atl1_phy_enter_power_saving(hw);
hw->phy_configured = false;
pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
exit:
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 4b46e68..367b6d4 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -5724,14 +5724,12 @@
if (!netif_running(bp->dev))
return;
- bp->in_reset_task = 1;
bnx2_netif_stop(bp);
bnx2_init_nic(bp);
atomic_set(&bp->intr_sem, 1);
bnx2_netif_start(bp);
- bp->in_reset_task = 0;
}
static void
@@ -5907,12 +5905,7 @@
struct bnx2 *bp = netdev_priv(dev);
u32 reset_code;
- /* Calling flush_scheduled_work() may deadlock because
- * linkwatch_event() may be on the workqueue and it will try to get
- * the rtnl_lock which we are holding.
- */
- while (bp->in_reset_task)
- msleep(1);
+ cancel_work_sync(&bp->reset_task);
bnx2_disable_int_sync(bp);
bnx2_napi_disable(bp);
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 1eaf5bb..2377cc1 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6656,7 +6656,6 @@
int current_interval;
struct timer_list timer;
struct work_struct reset_task;
- int in_reset_task;
/* Used to synchronize phy accesses. */
spinlock_t phy_lock;
diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c
index 7bdb5af..70cba64 100644
--- a/drivers/net/bnx2x.c
+++ b/drivers/net/bnx2x.c
@@ -6,7 +6,8 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*
- * Written by: Eliezer Tamir <eliezert@broadcom.com>
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Eliezer Tamir
* Based on code from Michael Chan's bnx2 driver
* UDP CSUM errata workaround by Arik Gendelman
* Slowpath rework by Vladislav Zolotarov
@@ -74,7 +75,7 @@
"Broadcom NetXtreme II 5771X 10Gigabit Ethernet Driver "
DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
-MODULE_AUTHOR("Eliezer Tamir <eliezert@broadcom.com>");
+MODULE_AUTHOR("Eliezer Tamir");
MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_MODULE_VERSION);
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 4f0c0d3..8e68d06 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -6,7 +6,8 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*
- * Written by: Eliezer Tamir <eliezert@broadcom.com>
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Eliezer Tamir
* Based on code from Michael Chan's bnx2 driver
*/
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index dcaecc5..370686e 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -6,7 +6,8 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*
- * Written by: Eliezer Tamir <eliezert@broadcom.com>
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Eliezer Tamir
*/
#ifndef BNX2X_INIT_H
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 348371f..fba87ab 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -1394,7 +1394,11 @@
#endif
if (!result) {
printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name);
- release_irq:
+release_dma:
+#if ALLOW_DMA
+ free_dma(dev->dma);
+#endif
+release_irq:
#if ALLOW_DMA
release_dma_buff(lp);
#endif
@@ -1442,12 +1446,12 @@
if ((result = detect_bnc(dev)) != DETECTED_NONE)
break;
printk(KERN_ERR "%s: no media detected\n", dev->name);
- goto release_irq;
+ goto release_dma;
}
switch(result) {
case DETECTED_NONE:
printk(KERN_ERR "%s: no network cable attached to configured media\n", dev->name);
- goto release_irq;
+ goto release_dma;
case DETECTED_RJ45H:
printk(KERN_INFO "%s: using half-duplex 10Base-T (RJ-45)\n", dev->name);
break;
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index f3cba5e..1037b13 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1803,6 +1803,8 @@
if (rx->prev->skb) {
struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data;
put_unaligned_le32(rx->dma_addr, &prev_rfd->link);
+ pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr,
+ sizeof(struct rfd), PCI_DMA_TODEVICE);
}
return 0;
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 701531e..a3f6a9c 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -347,7 +347,7 @@
else
netdev->features &= ~NETIF_F_TSO;
- if (data)
+ if (data && (adapter->hw.mac_type > e1000_82547_rev_2))
netdev->features |= NETIF_F_TSO6;
else
netdev->features &= ~NETIF_F_TSO6;
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index cab1835..648a87b 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2535,7 +2535,8 @@
adapter->link_speed = 0;
adapter->link_duplex = 0;
- e1000e_reset(adapter);
+ if (!pci_channel_offline(adapter->pdev))
+ e1000e_reset(adapter);
e1000_clean_tx_ring(adapter);
e1000_clean_rx_ring(adapter);
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index fe872fb..e01926b 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0091"
+#define DRV_VERSION "EHEA_0092"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1
@@ -452,7 +452,7 @@
struct ehea_bcmc_reg_array {
struct ehea_bcmc_reg_entry *arr;
int num_entries;
- struct mutex lock;
+ spinlock_t lock;
};
#define EHEA_PORT_UP 1
@@ -478,6 +478,7 @@
int num_add_tx_qps;
int num_mcs;
int resets;
+ u64 flags;
u64 mac_addr;
u32 logical_port_id;
u32 port_speed;
@@ -501,7 +502,8 @@
};
enum ehea_flag_bits {
- __EHEA_STOP_XFER
+ __EHEA_STOP_XFER,
+ __EHEA_DISABLE_PORT_RESET
};
void ehea_set_ethtool_ops(struct net_device *netdev);
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 287a619..0920b79 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -118,6 +118,7 @@
},
{},
};
+MODULE_DEVICE_TABLE(of, ehea_device_table);
static struct of_platform_driver ehea_driver = {
.name = "ehea",
@@ -137,6 +138,12 @@
}
}
+void ehea_schedule_port_reset(struct ehea_port *port)
+{
+ if (!test_bit(__EHEA_DISABLE_PORT_RESET, &port->flags))
+ schedule_work(&port->reset_task);
+}
+
static void ehea_update_firmware_handles(void)
{
struct ehea_fw_handle_entry *arr = NULL;
@@ -241,7 +248,7 @@
}
if (num_registrations) {
- arr = kzalloc(num_registrations * sizeof(*arr), GFP_KERNEL);
+ arr = kzalloc(num_registrations * sizeof(*arr), GFP_ATOMIC);
if (!arr)
return; /* Keep the existing array */
} else
@@ -301,7 +308,7 @@
memset(stats, 0, sizeof(*stats));
- cb2 = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ cb2 = kzalloc(PAGE_SIZE, GFP_ATOMIC);
if (!cb2) {
ehea_error("no mem for cb2");
goto out;
@@ -587,7 +594,7 @@
"Resetting port.", pr->qp->init_attr.qp_nr);
ehea_dump(cqe, sizeof(*cqe), "CQE");
}
- schedule_work(&pr->port->reset_task);
+ ehea_schedule_port_reset(pr->port);
return 1;
}
@@ -616,7 +623,7 @@
*tcph = tcp_hdr(skb);
/* check if ip header and tcp header are complete */
- if (iph->tot_len < ip_len + tcp_hdrlen(skb))
+ if (ntohs(iph->tot_len) < ip_len + tcp_hdrlen(skb))
return -1;
*hdr_flags = LRO_IPV4 | LRO_TCP;
@@ -765,7 +772,7 @@
ehea_error("Send Completion Error: Resetting port");
if (netif_msg_tx_err(pr->port))
ehea_dump(cqe, sizeof(*cqe), "Send CQE");
- schedule_work(&pr->port->reset_task);
+ ehea_schedule_port_reset(pr->port);
break;
}
@@ -885,7 +892,7 @@
eqe = ehea_poll_eq(port->qp_eq);
}
- schedule_work(&port->reset_task);
+ ehea_schedule_port_reset(port);
return IRQ_HANDLED;
}
@@ -1763,25 +1770,29 @@
memcpy(dev->dev_addr, mac_addr->sa_data, dev->addr_len);
- mutex_lock(&ehea_bcmc_regs.lock);
+ spin_lock(&ehea_bcmc_regs.lock);
/* Deregister old MAC in pHYP */
- ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
- if (ret)
- goto out_upregs;
+ if (port->state == EHEA_PORT_UP) {
+ ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
+ if (ret)
+ goto out_upregs;
+ }
port->mac_addr = cb0->port_mac_addr << 16;
/* Register new MAC in pHYP */
- ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
- if (ret)
- goto out_upregs;
+ if (port->state == EHEA_PORT_UP) {
+ ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
+ if (ret)
+ goto out_upregs;
+ }
ret = 0;
out_upregs:
ehea_update_bcmc_registrations();
- mutex_unlock(&ehea_bcmc_regs.lock);
+ spin_unlock(&ehea_bcmc_regs.lock);
out_free:
kfree(cb0);
out:
@@ -1943,7 +1954,7 @@
}
ehea_promiscuous(dev, 0);
- mutex_lock(&ehea_bcmc_regs.lock);
+ spin_lock(&ehea_bcmc_regs.lock);
if (dev->flags & IFF_ALLMULTI) {
ehea_allmulti(dev, 1);
@@ -1974,7 +1985,7 @@
}
out:
ehea_update_bcmc_registrations();
- mutex_unlock(&ehea_bcmc_regs.lock);
+ spin_unlock(&ehea_bcmc_regs.lock);
return;
}
@@ -2493,7 +2504,7 @@
}
}
- mutex_lock(&ehea_bcmc_regs.lock);
+ spin_lock(&ehea_bcmc_regs.lock);
ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
if (ret) {
@@ -2516,7 +2527,7 @@
ehea_info("Failed starting %s. ret=%i", dev->name, ret);
ehea_update_bcmc_registrations();
- mutex_unlock(&ehea_bcmc_regs.lock);
+ spin_unlock(&ehea_bcmc_regs.lock);
ehea_update_firmware_handles();
mutex_unlock(&ehea_fw_handles.lock);
@@ -2571,7 +2582,7 @@
mutex_lock(&ehea_fw_handles.lock);
- mutex_lock(&ehea_bcmc_regs.lock);
+ spin_lock(&ehea_bcmc_regs.lock);
ehea_drop_multicast_list(dev);
ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
@@ -2580,7 +2591,7 @@
port->state = EHEA_PORT_DOWN;
ehea_update_bcmc_registrations();
- mutex_unlock(&ehea_bcmc_regs.lock);
+ spin_unlock(&ehea_bcmc_regs.lock);
ret = ehea_clean_all_portres(port);
if (ret)
@@ -2601,12 +2612,14 @@
if (netif_msg_ifdown(port))
ehea_info("disabling port %s", dev->name);
- flush_scheduled_work();
+ set_bit(__EHEA_DISABLE_PORT_RESET, &port->flags);
+ cancel_work_sync(&port->reset_task);
mutex_lock(&port->port_lock);
netif_stop_queue(dev);
port_napi_disable(port);
ret = ehea_down(dev);
mutex_unlock(&port->port_lock);
+ clear_bit(__EHEA_DISABLE_PORT_RESET, &port->flags);
return ret;
}
@@ -2936,7 +2949,7 @@
if (netif_carrier_ok(dev) &&
!test_bit(__EHEA_STOP_XFER, &ehea_driver_flags))
- schedule_work(&port->reset_task);
+ ehea_schedule_port_reset(port);
}
int ehea_sense_adapter_attr(struct ehea_adapter *adapter)
@@ -3585,7 +3598,7 @@
memset(&ehea_bcmc_regs, 0, sizeof(ehea_bcmc_regs));
mutex_init(&ehea_fw_handles.lock);
- mutex_init(&ehea_bcmc_regs.lock);
+ spin_lock_init(&ehea_bcmc_regs.lock);
ret = check_module_parm();
if (ret)
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 46a90e9..c05cb15 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -400,26 +400,31 @@
mutex_unlock(&priv->lock);
}
+static unsigned long msec20_to_jiffies;
+
+static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val)
+{
+ unsigned long timeout = jiffies + msec20_to_jiffies;
+
+ /* 20 msec timeout read */
+ while ((nolock_regb_read(priv, reg) & mask) != val) {
+ if (time_after(jiffies, timeout)) {
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", reg);
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ }
+ return 0;
+}
+
/*
* Wait until the PHY operation is complete.
*/
static int wait_phy_ready(struct enc28j60_net *priv)
{
- unsigned long timeout = jiffies + 20 * HZ / 1000;
- int ret = 1;
-
- /* 20 msec timeout read */
- while (nolock_regb_read(priv, MISTAT) & MISTAT_BUSY) {
- if (time_after(jiffies, timeout)) {
- if (netif_msg_drv(priv))
- printk(KERN_DEBUG DRV_NAME
- ": PHY ready timeout!\n");
- ret = 0;
- break;
- }
- cpu_relax();
- }
- return ret;
+ return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1;
}
/*
@@ -594,6 +599,32 @@
nolock_regw_write(priv, ETXNDL, end);
}
+/*
+ * Low power mode shrinks power consumption about 100x, so we'd like
+ * the chip to be in that mode whenever it's inactive. (However, we
+ * can't stay in lowpower mode during suspend with WOL active.)
+ */
+static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low)
+{
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev, "%s power...\n",
+ is_low ? "low" : "high");
+
+ mutex_lock(&priv->lock);
+ if (is_low) {
+ nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
+ poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0);
+ poll_ready(priv, ECON1, ECON1_TXRTS, 0);
+ /* ECON2_VRPS was set during initialization */
+ nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
+ } else {
+ nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
+ poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
+ /* caller sets ECON1_RXEN */
+ }
+ mutex_unlock(&priv->lock);
+}
+
static int enc28j60_hw_init(struct enc28j60_net *priv)
{
u8 reg;
@@ -612,8 +643,8 @@
priv->tx_retry_count = 0;
priv->max_pk_counter = 0;
priv->rxfilter = RXFILTER_NORMAL;
- /* enable address auto increment */
- nolock_regb_write(priv, ECON2, ECON2_AUTOINC);
+ /* enable address auto increment and voltage regulator powersave */
+ nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS);
nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
@@ -690,7 +721,7 @@
static void enc28j60_hw_enable(struct enc28j60_net *priv)
{
- /* enable interrutps */
+ /* enable interrupts */
if (netif_msg_hw(priv))
printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
__FUNCTION__);
@@ -726,15 +757,12 @@
int ret = 0;
if (!priv->hw_enable) {
- if (autoneg == AUTONEG_DISABLE && speed == SPEED_10) {
+ /* link is in low power mode now; duplex setting
+ * will take effect on next enc28j60_hw_init().
+ */
+ if (autoneg == AUTONEG_DISABLE && speed == SPEED_10)
priv->full_duplex = (duplex == DUPLEX_FULL);
- if (!enc28j60_hw_init(priv)) {
- if (netif_msg_drv(priv))
- dev_err(&ndev->dev,
- "hw_reset() failed\n");
- ret = -EINVAL;
- }
- } else {
+ else {
if (netif_msg_link(priv))
dev_warn(&ndev->dev,
"unsupported link setting\n");
@@ -1307,7 +1335,8 @@
}
return -EADDRNOTAVAIL;
}
- /* Reset the hardware here */
+ /* Reset the hardware here (and take it out of low power mode) */
+ enc28j60_lowpower(priv, false);
enc28j60_hw_disable(priv);
if (!enc28j60_hw_init(priv)) {
if (netif_msg_ifup(priv))
@@ -1337,6 +1366,7 @@
printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
enc28j60_hw_disable(priv);
+ enc28j60_lowpower(priv, true);
netif_stop_queue(dev);
return 0;
@@ -1537,6 +1567,8 @@
dev->watchdog_timeo = TX_TIMEOUT;
SET_ETHTOOL_OPS(dev, &enc28j60_ethtool_ops);
+ enc28j60_lowpower(priv, true);
+
ret = register_netdev(dev);
if (ret) {
if (netif_msg_probe(priv))
@@ -1556,7 +1588,7 @@
return ret;
}
-static int enc28j60_remove(struct spi_device *spi)
+static int __devexit enc28j60_remove(struct spi_device *spi)
{
struct enc28j60_net *priv = dev_get_drvdata(&spi->dev);
@@ -1573,15 +1605,16 @@
static struct spi_driver enc28j60_driver = {
.driver = {
.name = DRV_NAME,
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
- },
+ },
.probe = enc28j60_probe,
.remove = __devexit_p(enc28j60_remove),
};
static int __init enc28j60_init(void)
{
+ msec20_to_jiffies = msecs_to_jiffies(20);
+
return spi_register_driver(&enc28j60_driver);
}
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index 5f9c42e..329edd9 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -78,7 +78,7 @@
MODULE_PARM_DESC(mac, "six hex digits, ie. 0x1,0x2,0xc0,0x01,0xba,0xbe");
#define MPC52xx_MESSAGES_DEFAULT ( NETIF_MSG_DRV | NETIF_MSG_PROBE | \
- NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFDOWN )
+ NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP)
static int debug = -1; /* the above default */
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "debugging messages level");
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 9eca97f..20d4fe9 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -3273,6 +3273,20 @@
dprintk(KERN_DEBUG "%s: link change notification done.\n", dev->name);
}
+static void nv_msi_workaround(struct fe_priv *np)
+{
+
+ /* Need to toggle the msi irq mask within the ethernet device,
+ * otherwise, future interrupts will not be detected.
+ */
+ if (np->msi_flags & NV_MSI_ENABLED) {
+ u8 __iomem *base = np->base;
+
+ writel(0, base + NvRegMSIIrqMask);
+ writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask);
+ }
+}
+
static irqreturn_t nv_nic_irq(int foo, void *data)
{
struct net_device *dev = (struct net_device *) data;
@@ -3295,6 +3309,8 @@
if (!(events & np->irqmask))
break;
+ nv_msi_workaround(np);
+
spin_lock(&np->lock);
nv_tx_done(dev);
spin_unlock(&np->lock);
@@ -3410,6 +3426,8 @@
if (!(events & np->irqmask))
break;
+ nv_msi_workaround(np);
+
spin_lock(&np->lock);
nv_tx_done_optimized(dev, TX_WORK_PER_LOOP);
spin_unlock(&np->lock);
@@ -3750,6 +3768,8 @@
if (!(events & NVREG_IRQ_TIMER))
return IRQ_RETVAL(0);
+ nv_msi_workaround(np);
+
spin_lock(&np->lock);
np->intr_test = 1;
spin_unlock(&np->lock);
@@ -4174,12 +4194,23 @@
netif_carrier_off(dev);
if (netif_running(dev)) {
+ unsigned long flags;
+
nv_disable_irq(dev);
netif_tx_lock_bh(dev);
- spin_lock(&np->lock);
+ /* with plain spinlock lockdep complains */
+ spin_lock_irqsave(&np->lock, flags);
/* stop engines */
+ /* FIXME:
+ * this can take some time, and interrupts are disabled
+ * due to spin_lock_irqsave, but let's hope no daemon
+ * is going to change the settings very often...
+ * Worst case:
+ * NV_RXSTOP_DELAY1MAX + NV_TXSTOP_DELAY1MAX
+ * + some minor delays, which is up to a second approximately
+ */
nv_stop_rxtx(dev);
- spin_unlock(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
netif_tx_unlock_bh(dev);
}
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c
index e363211..8268b35 100644
--- a/drivers/net/fs_enet/mac-fcc.c
+++ b/drivers/net/fs_enet/mac-fcc.c
@@ -463,6 +463,9 @@
else
C32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB);
+ /* Restore multicast and promiscuous settings */
+ set_multicast_list(dev);
+
S32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT);
}
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index dde9c7e..00bc7fb 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -959,7 +959,7 @@
unsigned char tmp[1];
bc->work_running = 0;
- flush_scheduled_work();
+ cancel_delayed_work_sync(&bc->run_work);
bc->stat = EPP_DCDBIT;
tmp[0] = 0;
pp->ops->epp_write_addr(pp, tmp, 1, 0);
diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c
index 0b94833..e8cfade 100644
--- a/drivers/net/hamradio/dmascc.c
+++ b/drivers/net/hamradio/dmascc.c
@@ -1077,8 +1077,6 @@
static void start_timer(struct scc_priv *priv, int t, int r15)
{
- unsigned long flags;
-
outb(priv->tmr_mode, priv->tmr_ctrl);
if (t == 0) {
tm_isr(priv);
diff --git a/drivers/net/ibm_newemac/Kconfig b/drivers/net/ibm_newemac/Kconfig
index 0d3e738..70a3272 100644
--- a/drivers/net/ibm_newemac/Kconfig
+++ b/drivers/net/ibm_newemac/Kconfig
@@ -1,6 +1,7 @@
config IBM_NEW_EMAC
tristate "IBM EMAC Ethernet support"
depends on PPC_DCR && PPC_MERGE
+ select CRC32
help
This driver supports the IBM EMAC family of Ethernet controllers
typically found on 4xx embedded PowerPC chips, but also on the
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 5d2108c..babc79a 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1636,6 +1636,12 @@
goto next;
}
+ if (len < ETH_HLEN) {
+ ++dev->estats.rx_dropped_stack;
+ emac_recycle_rx_skb(dev, slot, len);
+ goto next;
+ }
+
if (len && len < EMAC_RX_COPY_THRESH) {
struct sk_buff *copy_skb =
alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC);
@@ -2719,6 +2725,8 @@
/* Clean rings */
memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor));
memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor));
+ memset(dev->tx_skb, 0, NUM_TX_BUFF * sizeof(struct sk_buff *));
+ memset(dev->rx_skb, 0, NUM_RX_BUFF * sizeof(struct sk_buff *));
/* Attach to ZMII, if needed */
if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII) &&
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index ae398f0..e79a26a 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -718,7 +718,8 @@
adapter->link_speed = 0;
adapter->link_duplex = 0;
- igb_reset(adapter);
+ if (!pci_channel_offline(adapter->pdev))
+ igb_reset(adapter);
igb_clean_all_tx_rings(adapter);
igb_clean_all_rx_rings(adapter);
}
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index 9b358f6..2c03f4e 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -577,12 +577,12 @@
/* NIC to be configured in promiscuous mode. */
receivemode = IPG_RM_RECEIVEALLFRAMES;
} else if ((dev->flags & IFF_ALLMULTI) ||
- (dev->flags & IFF_MULTICAST &
+ ((dev->flags & IFF_MULTICAST) &&
(dev->mc_count > IPG_MULTICAST_HASHTABLE_SIZE))) {
/* NIC to be configured to receive all multicast
* frames. */
receivemode |= IPG_RM_RECEIVEMULTICAST;
- } else if (dev->flags & IFF_MULTICAST & (dev->mc_count > 0)) {
+ } else if ((dev->flags & IFF_MULTICAST) && (dev->mc_count > 0)) {
/* NIC to be configured to receive selected
* multicast addresses. */
receivemode |= IPG_RM_RECEIVEMULTICASTHASH;
@@ -1271,7 +1271,7 @@
framelen = le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFRAMELEN;
- endframeLen = framelen - jumbo->current_size;
+ endframelen = framelen - jumbo->current_size;
/*
if (framelen > IPG_RXFRAG_SIZE)
framelen=IPG_RXFRAG_SIZE;
@@ -1279,8 +1279,8 @@
if (framelen > IPG_RXSUPPORT_SIZE)
dev_kfree_skb_irq(jumbo->skb);
else {
- memcpy(skb_put(jumbo->skb, endframeLen),
- skb->data, endframeLen);
+ memcpy(skb_put(jumbo->skb, endframelen),
+ skb->data, endframelen);
jumbo->skb->protocol =
eth_type_trans(jumbo->skb, dev);
@@ -1352,16 +1352,16 @@
switch (ipg_nic_rx_check_frame_type(dev)) {
case FRAME_WITH_START_WITH_END:
- ipg_nic_rx_with_start_and_end(dev, tp, rxfd, entry);
+ ipg_nic_rx_with_start_and_end(dev, sp, rxfd, entry);
break;
case FRAME_WITH_START:
- ipg_nic_rx_with_start(dev, tp, rxfd, entry);
+ ipg_nic_rx_with_start(dev, sp, rxfd, entry);
break;
case FRAME_WITH_END:
- ipg_nic_rx_with_end(dev, tp, rxfd, entry);
+ ipg_nic_rx_with_end(dev, sp, rxfd, entry);
break;
case FRAME_NO_START_NO_END:
- ipg_nic_rx_no_start_no_end(dev, tp, rxfd, entry);
+ ipg_nic_rx_no_start_no_end(dev, sp, rxfd, entry);
break;
}
}
@@ -1808,7 +1808,7 @@
/* initialize JUMBO Frame control variable */
sp->jumbo.found_start = 0;
sp->jumbo.current_size = 0;
- sp->jumbo.skb = 0;
+ sp->jumbo.skb = NULL;
dev->mtu = IPG_TXFRAG_SIZE;
#endif
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index ce816ba..e631755 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -329,6 +329,7 @@
config MCS_FIR
tristate "MosChip MCS7780 IrDA-USB dongle"
depends on IRDA && USB && EXPERIMENTAL
+ select CRC32
help
Say Y or M here if you want to build support for the MosChip
MCS7780 IrDA-USB bridge device driver.
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index a7714da..effc1ce 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -152,6 +152,7 @@
static const struct pnp_device_id nsc_ircc_pnp_table[] = {
{ .id = "NSC6001", .driver_data = 0 },
{ .id = "IBM0071", .driver_data = 0 },
+ { .id = "HWPC224", .driver_data = 0 },
{ }
};
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index 58e1287..04ad357 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -1546,6 +1546,7 @@
IRDA_WARNING("%s, unable to allocate dma2=%d\n",
driver_name, self->io.dma2);
free_irq(self->io.irq, self);
+ free_dma(self->io.dma);
return -EAGAIN;
}
}
@@ -1606,6 +1607,8 @@
EnAllInt(iobase, OFF);
free_irq(self->io.irq, dev);
free_dma(self->io.dma);
+ if (self->io.dma2 != self->io.dma)
+ free_dma(self->io.dma2);
return 0;
}
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 6321b05..2f38e84 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -58,8 +58,8 @@
static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
{
- hw->mac.num_rx_queues = IXGBE_82598_MAX_TX_QUEUES;
- hw->mac.num_tx_queues = IXGBE_82598_MAX_RX_QUEUES;
+ hw->mac.num_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
+ hw->mac.num_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
hw->mac.num_rx_addrs = IXGBE_82598_RAR_ENTRIES;
/* PHY ops are filled in by default properly for Fiber only */
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 7b85922..8f04609 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1969,7 +1969,8 @@
netif_carrier_off(netdev);
netif_stop_queue(netdev);
- ixgbe_reset(adapter);
+ if (!pci_channel_offline(adapter->pdev))
+ ixgbe_reset(adapter);
ixgbe_clean_all_tx_rings(adapter);
ixgbe_clean_all_rx_rings(adapter);
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 36be6ef..e0d76c7 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -75,7 +75,7 @@
#include "myri10ge_mcp.h"
#include "myri10ge_mcp_gen_header.h"
-#define MYRI10GE_VERSION_STR "1.3.2-1.287"
+#define MYRI10GE_VERSION_STR "1.3.99-1.347"
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
MODULE_AUTHOR("Maintainer: help@myri.com");
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 8cb29f5..da4c4fb 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -776,7 +776,6 @@
u8 revision_id;
u16 board_type;
- u16 max_ports;
struct netxen_board_info boardcfg;
u32 xg_linkup;
u32 qg_linksup;
@@ -863,6 +862,7 @@
unsigned char mac_addr[ETH_ALEN];
int mtu;
int portnum;
+ u8 physical_port;
struct work_struct watchdog_task;
struct timer_list watchdog_timer;
@@ -1034,7 +1034,6 @@
/* Functions from netxen_nic_isr.c */
void netxen_initialize_adapter_sw(struct netxen_adapter *adapter);
-void netxen_initialize_adapter_hw(struct netxen_adapter *adapter);
void *netxen_alloc(struct pci_dev *pdev, size_t sz, dma_addr_t * ptr,
struct pci_dev **used_dev);
void netxen_initialize_adapter_ops(struct netxen_adapter *adapter);
@@ -1077,20 +1076,6 @@
#define NUM_SUPPORTED_BOARDS ARRAY_SIZE(netxen_boards)
-static inline void get_brd_port_by_type(u32 type, int *ports)
-{
- int i, found = 0;
- for (i = 0; i < NUM_SUPPORTED_BOARDS; ++i) {
- if (netxen_boards[i].brdtype == type) {
- *ports = netxen_boards[i].ports;
- found = 1;
- break;
- }
- }
- if (!found)
- *ports = 0;
-}
-
static inline void get_brd_name_by_type(u32 type, char *name)
{
int i, found = 0;
@@ -1169,5 +1154,4 @@
extern struct ethtool_ops netxen_nic_ethtool_ops;
-extern int physical_port[]; /* physical port # from virtual port.*/
#endif /* __NETXEN_NIC_H_ */
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index 6e98d83..723487b 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -369,7 +369,7 @@
for (i = 3; niu_registers[mode].reg[i - 3] != -1; i++) {
/* GB: port specific registers */
if (mode == 0 && i >= 19)
- window = physical_port[adapter->portnum] *
+ window = adapter->physical_port *
NETXEN_NIC_PORT_WINDOW;
NETXEN_NIC_LOCKED_READ_REG(niu_registers[mode].
@@ -527,7 +527,7 @@
{
struct netxen_adapter *adapter = netdev_priv(dev);
__u32 val;
- int port = physical_port[adapter->portnum];
+ int port = adapter->physical_port;
if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
@@ -573,7 +573,7 @@
{
struct netxen_adapter *adapter = netdev_priv(dev);
__u32 val;
- int port = physical_port[adapter->portnum];
+ int port = adapter->physical_port;
/* read mode */
if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index af73564..c43d06b 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -396,11 +396,8 @@
}
adapter->intr_scheme = readl(
NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_CAPABILITIES_FW));
- printk(KERN_NOTICE "%s: FW capabilities:0x%x\n", netxen_nic_driver_name,
- adapter->intr_scheme);
adapter->msi_mode = readl(
NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_MSI_MODE_FW));
- DPRINTK(INFO, "Receive Peg ready too. starting stuff\n");
addr = netxen_alloc(adapter->ahw.pdev,
sizeof(struct netxen_ring_ctx) +
@@ -408,8 +405,6 @@
(dma_addr_t *) & adapter->ctx_desc_phys_addr,
&adapter->ctx_desc_pdev);
- printk(KERN_INFO "ctx_desc_phys_addr: 0x%llx\n",
- (unsigned long long) adapter->ctx_desc_phys_addr);
if (addr == NULL) {
DPRINTK(ERR, "bad return from pci_alloc_consistent\n");
err = -ENOMEM;
@@ -429,8 +424,6 @@
adapter->max_tx_desc_count,
(dma_addr_t *) & hw->cmd_desc_phys_addr,
&adapter->ahw.cmd_desc_pdev);
- printk(KERN_INFO "cmd_desc_phys_addr: 0x%llx\n",
- (unsigned long long) hw->cmd_desc_phys_addr);
if (addr == NULL) {
DPRINTK(ERR, "bad return from pci_alloc_consistent\n");
@@ -1032,15 +1025,15 @@
int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu)
{
netxen_nic_write_w0(adapter,
- NETXEN_NIU_GB_MAX_FRAME_SIZE(
- physical_port[adapter->portnum]), new_mtu);
+ NETXEN_NIU_GB_MAX_FRAME_SIZE(adapter->physical_port),
+ new_mtu);
return 0;
}
int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu)
{
new_mtu += NETXEN_NIU_HDRSIZE + NETXEN_NIU_TLRSIZE;
- if (physical_port[adapter->portnum] == 0)
+ if (adapter->physical_port == 0)
netxen_nic_write_w0(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE,
new_mtu);
else
@@ -1051,7 +1044,7 @@
void netxen_nic_init_niu_gb(struct netxen_adapter *adapter)
{
- netxen_niu_gbe_init_port(adapter, physical_port[adapter->portnum]);
+ netxen_niu_gbe_init_port(adapter, adapter->physical_port);
}
void
@@ -1127,7 +1120,6 @@
void netxen_nic_flash_print(struct netxen_adapter *adapter)
{
- int valid = 1;
u32 fw_major = 0;
u32 fw_minor = 0;
u32 fw_build = 0;
@@ -1137,70 +1129,62 @@
__le32 *ptr32;
struct netxen_board_info *board_info = &(adapter->ahw.boardcfg);
- if (board_info->magic != NETXEN_BDINFO_MAGIC) {
- printk
- ("NetXen Unknown board config, Read 0x%x expected as 0x%x\n",
- board_info->magic, NETXEN_BDINFO_MAGIC);
- valid = 0;
- }
- if (board_info->header_version != NETXEN_BDINFO_VERSION) {
- printk("NetXen Unknown board config version."
- " Read %x, expected %x\n",
- board_info->header_version, NETXEN_BDINFO_VERSION);
- valid = 0;
- }
- if (valid) {
- ptr32 = (u32 *)&serial_num;
- addr = NETXEN_USER_START +
- offsetof(struct netxen_new_user_info, serial_num);
- for (i = 0; i < 8; i++) {
- if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) {
- printk("%s: ERROR reading %s board userarea.\n",
- netxen_nic_driver_name,
- netxen_nic_driver_name);
- return;
- }
- ptr32++;
- addr += sizeof(u32);
- }
+ adapter->driver_mismatch = 0;
+
+ ptr32 = (u32 *)&serial_num;
+ addr = NETXEN_USER_START +
+ offsetof(struct netxen_new_user_info, serial_num);
+ for (i = 0; i < 8; i++) {
+ if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) {
+ printk("%s: ERROR reading %s board userarea.\n",
+ netxen_nic_driver_name,
+ netxen_nic_driver_name);
+ adapter->driver_mismatch = 1;
+ return;
+ }
+ ptr32++;
+ addr += sizeof(u32);
+ }
+
+ fw_major = readl(NETXEN_CRB_NORMALIZE(adapter,
+ NETXEN_FW_VERSION_MAJOR));
+ fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter,
+ NETXEN_FW_VERSION_MINOR));
+ fw_build =
+ readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB));
+
+ if (adapter->portnum == 0) {
get_brd_name_by_type(board_info->board_type, brd_name);
printk("NetXen %s Board S/N %s Chip id 0x%x\n",
- brd_name, serial_num, board_info->chip_id);
-
- printk("NetXen %s Board #%d, Chip id 0x%x\n",
- board_info->board_type == 0x0b ? "XGB" : "GBE",
- board_info->board_num, board_info->chip_id);
- fw_major = readl(NETXEN_CRB_NORMALIZE(adapter,
- NETXEN_FW_VERSION_MAJOR));
- fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter,
- NETXEN_FW_VERSION_MINOR));
- fw_build =
- readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB));
-
- printk("NetXen Firmware version %d.%d.%d\n", fw_major, fw_minor,
- fw_build);
+ brd_name, serial_num, board_info->chip_id);
+ printk("NetXen Firmware version %d.%d.%d\n", fw_major,
+ fw_minor, fw_build);
}
+
if (fw_major != _NETXEN_NIC_LINUX_MAJOR) {
- printk(KERN_ERR "The mismatch in driver version and firmware "
- "version major number\n"
- "Driver version major number = %d \t"
- "Firmware version major number = %d \n",
- _NETXEN_NIC_LINUX_MAJOR, fw_major);
adapter->driver_mismatch = 1;
}
if (fw_minor != _NETXEN_NIC_LINUX_MINOR &&
fw_minor != (_NETXEN_NIC_LINUX_MINOR + 1)) {
- printk(KERN_ERR "The mismatch in driver version and firmware "
- "version minor number\n"
- "Driver version minor number = %d \t"
- "Firmware version minor number = %d \n",
- _NETXEN_NIC_LINUX_MINOR, fw_minor);
adapter->driver_mismatch = 1;
}
- if (adapter->driver_mismatch)
- printk(KERN_INFO "Use the driver with version no %d.%d.xxx\n",
- fw_major, fw_minor);
+ if (adapter->driver_mismatch) {
+ printk(KERN_ERR "%s: driver and firmware version mismatch\n",
+ adapter->netdev->name);
+ return;
+ }
+
+ switch (adapter->ahw.board_type) {
+ case NETXEN_NIC_GBE:
+ dev_info(&adapter->pdev->dev, "%s: GbE port initialized\n",
+ adapter->netdev->name);
+ break;
+ case NETXEN_NIC_XGBE:
+ dev_info(&adapter->pdev->dev, "%s: XGbE port initialized\n",
+ adapter->netdev->name);
+ break;
+ }
}
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 45fa33e..70d1b22 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -203,21 +203,6 @@
}
}
-void netxen_initialize_adapter_hw(struct netxen_adapter *adapter)
-{
- int ports = 0;
- struct netxen_board_info *board_info = &(adapter->ahw.boardcfg);
-
- if (netxen_nic_get_board_info(adapter) != 0)
- printk("%s: Error getting board config info.\n",
- netxen_nic_driver_name);
- get_brd_port_by_type(board_info->board_type, &ports);
- if (ports == 0)
- printk(KERN_ERR "%s: Unknown board type\n",
- netxen_nic_driver_name);
- adapter->ahw.max_ports = ports;
-}
-
void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
{
switch (adapter->ahw.board_type) {
@@ -765,18 +750,13 @@
int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
{
- int addr, val, status;
+ int addr, val;
int n, i;
int init_delay = 0;
struct crb_addr_pair *buf;
u32 off;
/* resetall */
- status = netxen_nic_get_board_info(adapter);
- if (status)
- printk("%s: netxen_pinit_from_rom: Error getting board info\n",
- netxen_nic_driver_name);
-
netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET,
NETXEN_ROMBUS_RESET);
@@ -860,10 +840,10 @@
netxen_nic_pci_change_crbwindow(adapter, 1);
}
if (init_delay == 1) {
- msleep(2000);
+ msleep(1000);
init_delay = 0;
}
- msleep(20);
+ msleep(1);
}
kfree(buf);
@@ -938,12 +918,28 @@
void netxen_free_adapter_offload(struct netxen_adapter *adapter)
{
+ int i;
+
if (adapter->dummy_dma.addr) {
- pci_free_consistent(adapter->ahw.pdev,
+ i = 100;
+ do {
+ if (dma_watchdog_shutdown_request(adapter) == 1)
+ break;
+ msleep(50);
+ if (dma_watchdog_shutdown_poll_result(adapter) == 1)
+ break;
+ } while (--i);
+
+ if (i) {
+ pci_free_consistent(adapter->ahw.pdev,
NETXEN_HOST_DUMMY_DMA_SIZE,
adapter->dummy_dma.addr,
adapter->dummy_dma.phys_addr);
- adapter->dummy_dma.addr = NULL;
+ adapter->dummy_dma.addr = NULL;
+ } else {
+ printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
+ adapter->netdev->name);
+ }
}
}
diff --git a/drivers/net/netxen/netxen_nic_isr.c b/drivers/net/netxen/netxen_nic_isr.c
index f487615..96cec41 100644
--- a/drivers/net/netxen/netxen_nic_isr.c
+++ b/drivers/net/netxen/netxen_nic_isr.c
@@ -145,7 +145,7 @@
/* verify the offset */
val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE));
- val = val >> physical_port[adapter->portnum];
+ val = val >> adapter->physical_port;
if (val == adapter->ahw.qg_linksup)
return;
@@ -199,7 +199,7 @@
/* WINDOW = 1 */
val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE));
- val >>= (physical_port[adapter->portnum] * 8);
+ val >>= (adapter->physical_port * 8);
val &= 0xff;
if (adapter->ahw.xg_linkup == 1 && val != XG_LINK_UP) {
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 7144c25..63cd67b 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -70,17 +70,19 @@
static irqreturn_t netxen_intr(int irq, void *data);
static irqreturn_t netxen_msi_intr(int irq, void *data);
-int physical_port[] = {0, 1, 2, 3};
-
/* PCI Device ID Table */
+#define ENTRY(device) \
+ {PCI_DEVICE(0x4040, (device)), \
+ .class = PCI_CLASS_NETWORK_ETHERNET << 8, .class_mask = ~0}
+
static struct pci_device_id netxen_pci_tbl[] __devinitdata = {
- {PCI_DEVICE(0x4040, 0x0001)},
- {PCI_DEVICE(0x4040, 0x0002)},
- {PCI_DEVICE(0x4040, 0x0003)},
- {PCI_DEVICE(0x4040, 0x0004)},
- {PCI_DEVICE(0x4040, 0x0005)},
- {PCI_DEVICE(0x4040, 0x0024)},
- {PCI_DEVICE(0x4040, 0x0025)},
+ ENTRY(0x0001),
+ ENTRY(0x0002),
+ ENTRY(0x0003),
+ ENTRY(0x0004),
+ ENTRY(0x0005),
+ ENTRY(0x0024),
+ ENTRY(0x0025),
{0,}
};
@@ -288,10 +290,11 @@
int pci_func_id = PCI_FUNC(pdev->devfn);
DECLARE_MAC_BUF(mac);
- printk(KERN_INFO "%s \n", netxen_nic_driver_string);
+ if (pci_func_id == 0)
+ printk(KERN_INFO "%s \n", netxen_nic_driver_string);
if (pdev->class != 0x020000) {
- printk(KERN_ERR"NetXen function %d, class %x will not "
+ printk(KERN_DEBUG "NetXen function %d, class %x will not "
"be enabled.\n",pci_func_id, pdev->class);
return -ENODEV;
}
@@ -450,8 +453,12 @@
*/
adapter->curr_window = 255;
- /* initialize the adapter */
- netxen_initialize_adapter_hw(adapter);
+ if (netxen_nic_get_board_info(adapter) != 0) {
+ printk("%s: Error getting board config info.\n",
+ netxen_nic_driver_name);
+ err = -EIO;
+ goto err_out_iounmap;
+ }
/*
* Adapter in our case is quad port so initialize it before
@@ -530,17 +537,15 @@
netxen_initialize_adapter_sw(adapter); /* initialize the buffers in adapter */
/* Mezz cards have PCI function 0,2,3 enabled */
- if ((adapter->ahw.boardcfg.board_type == NETXEN_BRDTYPE_P2_SB31_10G_IMEZ)
- && (pci_func_id >= 2))
+ switch (adapter->ahw.boardcfg.board_type) {
+ case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ:
+ case NETXEN_BRDTYPE_P2_SB31_10G_HMEZ:
+ if (pci_func_id >= 2)
adapter->portnum = pci_func_id - 2;
-
-#ifdef CONFIG_IA64
- if(adapter->portnum == 0) {
- netxen_pinit_from_rom(adapter, 0);
- udelay(500);
- netxen_load_firmware(adapter);
+ break;
+ default:
+ break;
}
-#endif
init_timer(&adapter->watchdog_timer);
adapter->ahw.xg_linkup = 0;
@@ -613,11 +618,18 @@
err = -ENODEV;
goto err_out_free_dev;
}
+ } else {
+ writel(0, NETXEN_CRB_NORMALIZE(adapter,
+ CRB_CMDPEG_STATE));
+ netxen_pinit_from_rom(adapter, 0);
+ msleep(1);
+ netxen_load_firmware(adapter);
+ netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
}
/* clear the register for future unloads/loads */
writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc)));
- printk(KERN_INFO "State: 0x%0x\n",
+ dev_info(&pdev->dev, "cmdpeg state: 0x%0x\n",
readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)));
/*
@@ -639,9 +651,10 @@
/*
* See if the firmware gave us a virtual-physical port mapping.
*/
+ adapter->physical_port = adapter->portnum;
i = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_V2P(adapter->portnum)));
if (i != 0x55555555)
- physical_port[adapter->portnum] = i;
+ adapter->physical_port = i;
netif_carrier_off(netdev);
netif_stop_queue(netdev);
@@ -654,22 +667,9 @@
goto err_out_free_dev;
}
+ netxen_nic_flash_print(adapter);
pci_set_drvdata(pdev, adapter);
- switch (adapter->ahw.board_type) {
- case NETXEN_NIC_GBE:
- printk(KERN_INFO "%s: QUAD GbE board initialized\n",
- netxen_nic_driver_name);
- break;
-
- case NETXEN_NIC_XGBE:
- printk(KERN_INFO "%s: XGbE board initialized\n",
- netxen_nic_driver_name);
- break;
- }
-
- adapter->driver_mismatch = 0;
-
return 0;
err_out_free_dev:
@@ -760,55 +760,8 @@
vfree(adapter->cmd_buf_arr);
- if (adapter->portnum == 0) {
- if (init_firmware_done) {
- i = 100;
- do {
- if (dma_watchdog_shutdown_request(adapter) == 1)
- break;
- msleep(100);
- if (dma_watchdog_shutdown_poll_result(adapter) == 1)
- break;
- } while (--i);
-
- if (i == 0)
- printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
- netdev->name);
-
- /* clear the register for future unloads/loads */
- writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc)));
- printk(KERN_INFO "State: 0x%0x\n",
- readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)));
-
- /* leave the hw in the same state as reboot */
- writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE));
- netxen_pinit_from_rom(adapter, 0);
- msleep(1);
- netxen_load_firmware(adapter);
- netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
- }
-
- /* clear the register for future unloads/loads */
- writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc)));
- printk(KERN_INFO "State: 0x%0x\n",
- readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)));
-
- i = 100;
- do {
- if (dma_watchdog_shutdown_request(adapter) == 1)
- break;
- msleep(100);
- if (dma_watchdog_shutdown_poll_result(adapter) == 1)
- break;
- } while (--i);
-
- if (i) {
- netxen_free_adapter_offload(adapter);
- } else {
- printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
- netdev->name);
- }
- }
+ if (adapter->portnum == 0)
+ netxen_free_adapter_offload(adapter);
if (adapter->irq)
free_irq(adapter->irq, adapter);
@@ -840,13 +793,15 @@
irq_handler_t handler;
unsigned long flags = IRQF_SAMPLE_RANDOM;
+ if (adapter->driver_mismatch)
+ return -EIO;
+
if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC) {
err = netxen_init_firmware(adapter);
if (err != 0) {
printk(KERN_ERR "Failed to init firmware\n");
return -EIO;
}
- netxen_nic_flash_print(adapter);
/* setup all the resources for the Phantom... */
/* this include the descriptors for rcv, tx, and status */
@@ -895,14 +850,12 @@
if (adapter->set_mtu)
adapter->set_mtu(adapter, netdev->mtu);
- if (!adapter->driver_mismatch)
- mod_timer(&adapter->watchdog_timer, jiffies);
+ mod_timer(&adapter->watchdog_timer, jiffies);
napi_enable(&adapter->napi);
netxen_nic_enable_int(adapter);
- if (!adapter->driver_mismatch)
- netif_start_queue(netdev);
+ netif_start_queue(netdev);
return 0;
}
diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c
index 1c852a7..a3bc7cc 100644
--- a/drivers/net/netxen/netxen_nic_niu.c
+++ b/drivers/net/netxen/netxen_nic_niu.c
@@ -94,7 +94,7 @@
long timeout = 0;
long result = 0;
long restore = 0;
- long phy = physical_port[adapter->portnum];
+ long phy = adapter->physical_port;
__u32 address;
__u32 command;
__u32 status;
@@ -190,7 +190,7 @@
long timeout = 0;
long result = 0;
long restore = 0;
- long phy = physical_port[adapter->portnum];
+ long phy = adapter->physical_port;
__u32 address;
__u32 command;
__u32 status;
@@ -456,7 +456,7 @@
int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port)
{
- u32 portnum = physical_port[adapter->portnum];
+ u32 portnum = adapter->physical_port;
netxen_crb_writelit_adapter(adapter,
NETXEN_NIU_XGE_CONFIG_1+(0x10000*portnum), 0x1447);
@@ -573,7 +573,7 @@
{
u32 stationhigh;
u32 stationlow;
- int phy = physical_port[adapter->portnum];
+ int phy = adapter->physical_port;
u8 val[8];
if (addr == NULL)
@@ -604,7 +604,7 @@
{
u8 temp[4];
u32 val;
- int phy = physical_port[adapter->portnum];
+ int phy = adapter->physical_port;
unsigned char mac_addr[6];
int i;
DECLARE_MAC_BUF(mac);
@@ -724,7 +724,7 @@
int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter)
{
__u32 mac_cfg0;
- u32 port = physical_port[adapter->portnum];
+ u32 port = adapter->physical_port;
if (port > NETXEN_NIU_MAX_GBE_PORTS)
return -EINVAL;
@@ -740,7 +740,7 @@
int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
{
__u32 mac_cfg;
- u32 port = physical_port[adapter->portnum];
+ u32 port = adapter->physical_port;
if (port > NETXEN_NIU_MAX_XG_PORTS)
return -EINVAL;
@@ -757,7 +757,7 @@
netxen_niu_prom_mode_t mode)
{
__u32 reg;
- u32 port = physical_port[adapter->portnum];
+ u32 port = adapter->physical_port;
if (port > NETXEN_NIU_MAX_GBE_PORTS)
return -EINVAL;
@@ -814,7 +814,7 @@
int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter,
netxen_ethernet_macaddr_t addr)
{
- int phy = physical_port[adapter->portnum];
+ int phy = adapter->physical_port;
u8 temp[4];
u32 val;
@@ -867,7 +867,7 @@
int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter,
netxen_ethernet_macaddr_t * addr)
{
- int phy = physical_port[adapter->portnum];
+ int phy = adapter->physical_port;
u32 stationhigh;
u32 stationlow;
u8 val[8];
@@ -896,7 +896,7 @@
netxen_niu_prom_mode_t mode)
{
__u32 reg;
- u32 port = physical_port[adapter->portnum];
+ u32 port = adapter->physical_port;
if (port > NETXEN_NIU_MAX_XG_PORTS)
return -EINVAL;
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index 3b2a6c598..993d87c 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -277,7 +277,7 @@
*tcph = tcp_hdr(skb);
/* check if ip header and tcp header are complete */
- if (iph->tot_len < ip_len + tcp_hdrlen(skb))
+ if (ntohs(iph->tot_len) < ip_len + tcp_hdrlen(skb))
return -1;
*hdr_flags = LRO_IPV4 | LRO_TCP;
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index ce95c5d..70d012e 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -525,12 +525,14 @@
int ret;
axnet_dev_t *info = PRIV(dev);
struct pcmcia_device *link = info->p_dev;
+ unsigned int nic_base = dev->base_addr;
DEBUG(2, "axnet_open('%s')\n", dev->name);
if (!pcmcia_dev_present(link))
return -ENODEV;
+ outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */
ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, "axnet_cs", dev);
if (ret)
return ret;
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index fd8158a..2d4c4ad 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -969,6 +969,7 @@
int ret;
pcnet_dev_t *info = PRIV(dev);
struct pcmcia_device *link = info->p_dev;
+ unsigned int nic_base = dev->base_addr;
DEBUG(2, "pcnet_open('%s')\n", dev->name);
@@ -976,6 +977,8 @@
return -ENODEV;
set_misc_reg(dev);
+
+ outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */
ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev_info, dev);
if (ret)
return ret;
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index 58a26a4..fc6f4b8 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -341,12 +341,6 @@
struct pppox_sock *relay_po;
if (sk->sk_state & PPPOX_BOUND) {
- struct pppoe_hdr *ph = pppoe_hdr(skb);
- int len = ntohs(ph->length);
- skb_pull_rcsum(skb, sizeof(struct pppoe_hdr));
- if (pskb_trim_rcsum(skb, len))
- goto abort_kfree;
-
ppp_input(&po->chan, skb);
} else if (sk->sk_state & PPPOX_RELAY) {
relay_po = get_item_by_addr(&po->pppoe_relay);
@@ -357,7 +351,6 @@
if ((sk_pppox(relay_po)->sk_state & PPPOX_CONNECTED) == 0)
goto abort_put;
- skb_pull(skb, sizeof(struct pppoe_hdr));
if (!__pppoe_xmit(sk_pppox(relay_po), skb))
goto abort_put;
} else {
@@ -388,6 +381,7 @@
{
struct pppoe_hdr *ph;
struct pppox_sock *po;
+ int len;
if (!(skb = skb_share_check(skb, GFP_ATOMIC)))
goto out;
@@ -399,10 +393,21 @@
goto drop;
ph = pppoe_hdr(skb);
+ len = ntohs(ph->length);
+
+ skb_pull_rcsum(skb, sizeof(*ph));
+ if (skb->len < len)
+ goto drop;
po = get_item(ph->sid, eth_hdr(skb)->h_source, dev->ifindex);
- if (po != NULL)
- return sk_receive_skb(sk_pppox(po), skb, 0);
+ if (!po)
+ goto drop;
+
+ if (pskb_trim_rcsum(skb, len))
+ goto drop;
+
+ return sk_receive_skb(sk_pppox(po), skb, 0);
+
drop:
kfree_skb(skb);
out:
@@ -427,12 +432,12 @@
if (dev_net(dev) != &init_net)
goto abort;
- if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr)))
- goto abort;
-
if (!(skb = skb_share_check(skb, GFP_ATOMIC)))
goto out;
+ if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr)))
+ goto abort;
+
ph = pppoe_hdr(skb);
if (ph->code != PADT_CODE)
goto abort;
@@ -937,12 +942,10 @@
m->msg_namelen = 0;
if (skb) {
- struct pppoe_hdr *ph = pppoe_hdr(skb);
- const int len = ntohs(ph->length);
-
- error = memcpy_toiovec(m->msg_iov, (unsigned char *) &ph->tag[0], len);
+ total_len = min_t(size_t, total_len, skb->len);
+ error = skb_copy_datagram_iovec(skb, 0, m->msg_iov, total_len);
if (error == 0)
- error = len;
+ error = total_len;
}
kfree_skb(skb);
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index 8db342f..f929882 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -240,12 +240,15 @@
if (sk == NULL)
return NULL;
+ sock_hold(sk);
session = (struct pppol2tp_session *)(sk->sk_user_data);
- if (session == NULL)
- return NULL;
+ if (session == NULL) {
+ sock_put(sk);
+ goto out;
+ }
BUG_ON(session->magic != L2TP_SESSION_MAGIC);
-
+out:
return session;
}
@@ -256,12 +259,15 @@
if (sk == NULL)
return NULL;
+ sock_hold(sk);
tunnel = (struct pppol2tp_tunnel *)(sk->sk_user_data);
- if (tunnel == NULL)
- return NULL;
+ if (tunnel == NULL) {
+ sock_put(sk);
+ goto out;
+ }
BUG_ON(tunnel->magic != L2TP_TUNNEL_MAGIC);
-
+out:
return tunnel;
}
@@ -716,12 +722,14 @@
session->stats.rx_errors++;
kfree_skb(skb);
sock_put(session->sock);
+ sock_put(sock);
return 0;
error:
/* Put UDP header back */
__skb_push(skb, sizeof(struct udphdr));
+ sock_put(sock);
no_tunnel:
return 1;
@@ -745,10 +753,13 @@
"%s: received %d bytes\n", tunnel->name, skb->len);
if (pppol2tp_recv_core(sk, skb))
- goto pass_up;
+ goto pass_up_put;
+ sock_put(sk);
return 0;
+pass_up_put:
+ sock_put(sk);
pass_up:
return 1;
}
@@ -772,14 +783,18 @@
err = 0;
skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
flags & MSG_DONTWAIT, &err);
- if (skb) {
- err = memcpy_toiovec(msg->msg_iov, (unsigned char *) skb->data,
- skb->len);
- if (err < 0)
- goto do_skb_free;
- err = skb->len;
- }
-do_skb_free:
+ if (!skb)
+ goto end;
+
+ if (len > skb->len)
+ len = skb->len;
+ else if (len < skb->len)
+ msg->msg_flags |= MSG_TRUNC;
+
+ err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, len);
+ if (likely(err == 0))
+ err = len;
+
kfree_skb(skb);
end:
return err;
@@ -858,7 +873,7 @@
tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
if (tunnel == NULL)
- goto error;
+ goto error_put_sess;
/* What header length is configured for this session? */
hdr_len = pppol2tp_l2tp_header_len(session);
@@ -870,7 +885,7 @@
sizeof(ppph) + total_len,
0, GFP_KERNEL);
if (!skb)
- goto error;
+ goto error_put_sess_tun;
/* Reserve space for headers. */
skb_reserve(skb, NET_SKB_PAD);
@@ -900,7 +915,7 @@
error = memcpy_fromiovec(skb->data, m->msg_iov, total_len);
if (error < 0) {
kfree_skb(skb);
- goto error;
+ goto error_put_sess_tun;
}
skb_put(skb, total_len);
@@ -947,10 +962,33 @@
session->stats.tx_errors++;
}
+ return error;
+
+error_put_sess_tun:
+ sock_put(session->tunnel_sock);
+error_put_sess:
+ sock_put(sk);
error:
return error;
}
+/* Automatically called when the skb is freed.
+ */
+static void pppol2tp_sock_wfree(struct sk_buff *skb)
+{
+ sock_put(skb->sk);
+}
+
+/* For data skbs that we transmit, we associate with the tunnel socket
+ * but don't do accounting.
+ */
+static inline void pppol2tp_skb_set_owner_w(struct sk_buff *skb, struct sock *sk)
+{
+ sock_hold(sk);
+ skb->sk = sk;
+ skb->destructor = pppol2tp_sock_wfree;
+}
+
/* Transmit function called by generic PPP driver. Sends PPP frame
* over PPPoL2TP socket.
*
@@ -993,10 +1031,10 @@
sk_tun = session->tunnel_sock;
if (sk_tun == NULL)
- goto abort;
+ goto abort_put_sess;
tunnel = pppol2tp_sock_to_tunnel(sk_tun);
if (tunnel == NULL)
- goto abort;
+ goto abort_put_sess;
/* What header length is configured for this session? */
hdr_len = pppol2tp_l2tp_header_len(session);
@@ -1009,7 +1047,7 @@
sizeof(struct udphdr) + hdr_len + sizeof(ppph);
old_headroom = skb_headroom(skb);
if (skb_cow_head(skb, headroom))
- goto abort;
+ goto abort_put_sess_tun;
new_headroom = skb_headroom(skb);
skb_orphan(skb);
@@ -1069,7 +1107,7 @@
/* Get routing info from the tunnel socket */
dst_release(skb->dst);
skb->dst = dst_clone(__sk_dst_get(sk_tun));
- skb->sk = sk_tun;
+ pppol2tp_skb_set_owner_w(skb, sk_tun);
/* Queue the packet to IP for output */
len = skb->len;
@@ -1086,8 +1124,14 @@
session->stats.tx_errors++;
}
+ sock_put(sk_tun);
+ sock_put(sk);
return 1;
+abort_put_sess_tun:
+ sock_put(sk_tun);
+abort_put_sess:
+ sock_put(sk);
abort:
/* Free the original skb */
kfree_skb(skb);
@@ -1191,7 +1235,7 @@
{
struct pppol2tp_tunnel *tunnel;
- tunnel = pppol2tp_sock_to_tunnel(sk);
+ tunnel = sk->sk_user_data;
if (tunnel == NULL)
goto end;
@@ -1230,10 +1274,12 @@
if (sk->sk_user_data != NULL) {
struct pppol2tp_tunnel *tunnel;
- session = pppol2tp_sock_to_session(sk);
+ session = sk->sk_user_data;
if (session == NULL)
goto out;
+ BUG_ON(session->magic != L2TP_SESSION_MAGIC);
+
/* Don't use pppol2tp_sock_to_tunnel() here to
* get the tunnel context because the tunnel
* socket might have already been closed (its
@@ -1279,6 +1325,7 @@
static int pppol2tp_release(struct socket *sock)
{
struct sock *sk = sock->sk;
+ struct pppol2tp_session *session;
int error;
if (!sk)
@@ -1296,9 +1343,18 @@
sock_orphan(sk);
sock->sk = NULL;
+ session = pppol2tp_sock_to_session(sk);
+
/* Purge any queued data */
skb_queue_purge(&sk->sk_receive_queue);
skb_queue_purge(&sk->sk_write_queue);
+ if (session != NULL) {
+ struct sk_buff *skb;
+ while ((skb = skb_dequeue(&session->reorder_q))) {
+ kfree_skb(skb);
+ sock_put(sk);
+ }
+ }
release_sock(sk);
@@ -1601,7 +1657,7 @@
error = ppp_register_channel(&po->chan);
if (error)
- goto end;
+ goto end_put_tun;
/* This is how we get the session context from the socket. */
sk->sk_user_data = session;
@@ -1621,6 +1677,8 @@
PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
"%s: created\n", session->name);
+end_put_tun:
+ sock_put(tunnel_sock);
end:
release_sock(sk);
@@ -1668,6 +1726,7 @@
*usockaddr_len = len;
error = 0;
+ sock_put(sock->sk);
end:
return error;
@@ -1906,14 +1965,17 @@
err = -EBADF;
tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
if (tunnel == NULL)
- goto end;
+ goto end_put_sess;
err = pppol2tp_tunnel_ioctl(tunnel, cmd, arg);
- goto end;
+ sock_put(session->tunnel_sock);
+ goto end_put_sess;
}
err = pppol2tp_session_ioctl(session, cmd, arg);
+end_put_sess:
+ sock_put(sk);
end:
return err;
}
@@ -2059,14 +2121,17 @@
err = -EBADF;
tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
if (tunnel == NULL)
- goto end;
+ goto end_put_sess;
err = pppol2tp_tunnel_setsockopt(sk, tunnel, optname, val);
+ sock_put(session->tunnel_sock);
} else
err = pppol2tp_session_setsockopt(sk, session, optname, val);
err = 0;
+end_put_sess:
+ sock_put(sk);
end:
return err;
}
@@ -2181,20 +2246,24 @@
err = -EBADF;
tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
if (tunnel == NULL)
- goto end;
+ goto end_put_sess;
err = pppol2tp_tunnel_getsockopt(sk, tunnel, optname, &val);
+ sock_put(session->tunnel_sock);
} else
err = pppol2tp_session_getsockopt(sk, session, optname, &val);
err = -EFAULT;
if (put_user(len, (int __user *) optlen))
- goto end;
+ goto end_put_sess;
if (copy_to_user((void __user *) optval, &val, len))
- goto end;
+ goto end_put_sess;
err = 0;
+
+end_put_sess:
+ sock_put(sk);
end:
return err;
}
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index b7f7b22..bccee68 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -3701,7 +3701,9 @@
printk(KERN_ERR PFX
"%s: Driver up/down cycle failed, "
"closing device\n",qdev->ndev->name);
+ rtnl_lock();
dev_close(qdev->ndev);
+ rtnl_unlock();
return -1;
}
return 0;
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 169edc1..504a48f 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -273,7 +273,7 @@
dma_addr_t mapping = desc_dma;
while (size-- > 0) {
- mapping += sizeof(sizeof(*desc));
+ mapping += sizeof(*desc);
desc->ndesc = cpu_to_le32(mapping);
desc->vndescp = desc + 1;
desc++;
@@ -733,7 +733,7 @@
}
/* Timer active again */
- mod_timer(&lp->timer, jiffies + round_jiffies(HZ));
+ mod_timer(&lp->timer, round_jiffies(jiffies + HZ));
}
/* Read/set MAC address routines */
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index a20693e..ae7b697 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -2625,9 +2625,7 @@
rxdp1->Buffer0_ptr = pci_map_single
(ring->pdev, skb->data, size - NET_IP_ALIGN,
PCI_DMA_FROMDEVICE);
- if( (rxdp1->Buffer0_ptr == 0) ||
- (rxdp1->Buffer0_ptr ==
- DMA_ERROR_CODE))
+ if(pci_dma_mapping_error(rxdp1->Buffer0_ptr))
goto pci_map_failed;
rxdp->Control_2 =
@@ -2657,6 +2655,7 @@
skb->data = (void *) (unsigned long)tmp;
skb_reset_tail_pointer(skb);
+ /* AK: check is wrong. 0 can be valid dma address */
if (!(rxdp3->Buffer0_ptr))
rxdp3->Buffer0_ptr =
pci_map_single(ring->pdev, ba->ba_0,
@@ -2665,8 +2664,7 @@
pci_dma_sync_single_for_device(ring->pdev,
(dma_addr_t) rxdp3->Buffer0_ptr,
BUF0_LEN, PCI_DMA_FROMDEVICE);
- if( (rxdp3->Buffer0_ptr == 0) ||
- (rxdp3->Buffer0_ptr == DMA_ERROR_CODE))
+ if (pci_dma_mapping_error(rxdp3->Buffer0_ptr))
goto pci_map_failed;
rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
@@ -2681,18 +2679,17 @@
(ring->pdev, skb->data, ring->mtu + 4,
PCI_DMA_FROMDEVICE);
- if( (rxdp3->Buffer2_ptr == 0) ||
- (rxdp3->Buffer2_ptr == DMA_ERROR_CODE))
+ if (pci_dma_mapping_error(rxdp3->Buffer2_ptr))
goto pci_map_failed;
+ /* AK: check is wrong */
if (!rxdp3->Buffer1_ptr)
rxdp3->Buffer1_ptr =
pci_map_single(ring->pdev,
ba->ba_1, BUF1_LEN,
PCI_DMA_FROMDEVICE);
- if( (rxdp3->Buffer1_ptr == 0) ||
- (rxdp3->Buffer1_ptr == DMA_ERROR_CODE)) {
+ if (pci_dma_mapping_error(rxdp3->Buffer1_ptr)) {
pci_unmap_single
(ring->pdev,
(dma_addr_t)(unsigned long)
@@ -2861,7 +2858,8 @@
struct config_param *config;
struct mac_info *mac_control;
int pkts_processed = 0;
- u8 *addr = NULL, val8 = 0;
+ u8 __iomem *addr = NULL;
+ u8 val8 = 0;
struct s2io_nic *nic = dev->priv;
struct XENA_dev_config __iomem *bar0 = nic->bar0;
int budget_org = budget;
@@ -2878,7 +2876,7 @@
if (pkts_processed < budget_org) {
netif_rx_complete(dev, napi);
/*Re Enable MSI-Rx Vector*/
- addr = (u8 *)&bar0->xmsi_mask_reg;
+ addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
addr += 7 - ring->ring_no;
val8 = (ring->ring_no == 0) ? 0x3f : 0xbf;
writeb(val8, addr);
@@ -4263,16 +4261,14 @@
txdp->Buffer_Pointer = pci_map_single(sp->pdev,
fifo->ufo_in_band_v,
sizeof(u64), PCI_DMA_TODEVICE);
- if((txdp->Buffer_Pointer == 0) ||
- (txdp->Buffer_Pointer == DMA_ERROR_CODE))
+ if (pci_dma_mapping_error(txdp->Buffer_Pointer))
goto pci_map_failed;
txdp++;
}
txdp->Buffer_Pointer = pci_map_single
(sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE);
- if((txdp->Buffer_Pointer == 0) ||
- (txdp->Buffer_Pointer == DMA_ERROR_CODE))
+ if (pci_dma_mapping_error(txdp->Buffer_Pointer))
goto pci_map_failed;
txdp->Host_Control = (unsigned long) skb;
@@ -4364,9 +4360,10 @@
return IRQ_HANDLED;
if (sp->config.napi) {
- u8 *addr = NULL, val8 = 0;
+ u8 __iomem *addr = NULL;
+ u8 val8 = 0;
- addr = (u8 *)&bar0->xmsi_mask_reg;
+ addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
addr += (7 - ring->ring_no);
val8 = (ring->ring_no == 0) ? 0x7f : 0xff;
writeb(val8, addr);
@@ -6882,10 +6879,8 @@
pci_map_single( sp->pdev, (*skb)->data,
size - NET_IP_ALIGN,
PCI_DMA_FROMDEVICE);
- if( (rxdp1->Buffer0_ptr == 0) ||
- (rxdp1->Buffer0_ptr == DMA_ERROR_CODE)) {
+ if (pci_dma_mapping_error(rxdp1->Buffer0_ptr))
goto memalloc_failed;
- }
rxdp->Host_Control = (unsigned long) (*skb);
}
} else if ((sp->rxd_mode == RXD_MODE_3B) && (rxdp->Host_Control == 0)) {
@@ -6911,15 +6906,12 @@
pci_map_single(sp->pdev, (*skb)->data,
dev->mtu + 4,
PCI_DMA_FROMDEVICE);
- if( (rxdp3->Buffer2_ptr == 0) ||
- (rxdp3->Buffer2_ptr == DMA_ERROR_CODE)) {
+ if (pci_dma_mapping_error(rxdp3->Buffer2_ptr))
goto memalloc_failed;
- }
rxdp3->Buffer0_ptr = *temp0 =
pci_map_single( sp->pdev, ba->ba_0, BUF0_LEN,
PCI_DMA_FROMDEVICE);
- if( (rxdp3->Buffer0_ptr == 0) ||
- (rxdp3->Buffer0_ptr == DMA_ERROR_CODE)) {
+ if (pci_dma_mapping_error(rxdp3->Buffer0_ptr)) {
pci_unmap_single (sp->pdev,
(dma_addr_t)rxdp3->Buffer2_ptr,
dev->mtu + 4, PCI_DMA_FROMDEVICE);
@@ -6931,8 +6923,7 @@
rxdp3->Buffer1_ptr = *temp1 =
pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN,
PCI_DMA_FROMDEVICE);
- if( (rxdp3->Buffer1_ptr == 0) ||
- (rxdp3->Buffer1_ptr == DMA_ERROR_CODE)) {
+ if (pci_dma_mapping_error(rxdp3->Buffer1_ptr)) {
pci_unmap_single (sp->pdev,
(dma_addr_t)rxdp3->Buffer0_ptr,
BUF0_LEN, PCI_DMA_FROMDEVICE);
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 4706f7f..1827b66 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -75,10 +75,6 @@
/* DEBUG message print. */
#define DBG_PRINT(dbg_level, args...) if(!(debug_level<dbg_level)) printk(args)
-#ifndef DMA_ERROR_CODE
-#define DMA_ERROR_CODE (~(dma_addr_t)0x0)
-#endif
-
/* Protocol assist features of the NIC */
#define L3_CKSUM_OK 0xFFFF
#define L4_CKSUM_OK 0xFFFF
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index b4b6380..61955f8 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -972,7 +972,7 @@
skb_copy_and_csum_dev(skb, priv->tx_bufs + entry * TX_BUF_SIZE);
len = skb->len;
- if (unlikely(len < ETH_ZLEN)) {
+ if (len < ETH_ZLEN) {
memset(priv->tx_bufs + entry * TX_BUF_SIZE + len,
0, ETH_ZLEN - len);
len = ETH_ZLEN;
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index d3f749c..790db89 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -733,8 +733,10 @@
continue;
break;
}
- if (rc)
+ if (rc) {
EFX_ERR(efx, "failed to flush rx queue %d\n", rx_queue->queue);
+ efx_schedule_reset(efx, RESET_TYPE_INVISIBLE);
+ }
/* Remove RX descriptor ring from card */
EFX_ZERO_OWORD(rx_desc_ptr);
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c
index dbdcee4..55c0d97 100644
--- a/drivers/net/sfc/falcon_xmac.c
+++ b/drivers/net/sfc/falcon_xmac.c
@@ -459,7 +459,7 @@
tries--;
}
- EFX_ERR(efx, "Failed to bring XAUI link back up in %d tries!\n",
+ EFX_LOG(efx, "Failed to bring XAUI link back up in %d tries!\n",
max_tries);
return 0;
}
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 3bb6053..c8a5ef2 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -118,6 +118,7 @@
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4355) }, /* 88E8040T */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */
@@ -4404,7 +4405,9 @@
if (err) {
printk(KERN_ERR PFX "%s: could not up: %d\n",
dev->name, err);
+ rtnl_lock();
dev_close(dev);
+ rtnl_unlock();
goto out;
}
}
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 4e28002..e2ee91a 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -136,7 +136,6 @@
/* work queue */
struct work_struct phy_configure;
- int work_pending;
int tx_throttle;
spinlock_t lock;
@@ -960,11 +959,11 @@
* We should not be called if phy_type is zero.
*/
if (lp->phy_type == 0)
- goto smc911x_phy_configure_exit_nolock;
+ return;
if (smc911x_phy_reset(dev, phyaddr)) {
printk("%s: PHY reset timed out\n", dev->name);
- goto smc911x_phy_configure_exit_nolock;
+ return;
}
spin_lock_irqsave(&lp->lock, flags);
@@ -1033,8 +1032,6 @@
smc911x_phy_configure_exit:
spin_unlock_irqrestore(&lp->lock, flags);
-smc911x_phy_configure_exit_nolock:
- lp->work_pending = 0;
}
/*
@@ -1356,11 +1353,8 @@
* smc911x_phy_configure() calls msleep() which calls schedule_timeout()
* which calls schedule(). Hence we use a work queue.
*/
- if (lp->phy_type != 0) {
- if (schedule_work(&lp->phy_configure)) {
- lp->work_pending = 1;
- }
- }
+ if (lp->phy_type != 0)
+ schedule_work(&lp->phy_configure);
/* We can accept TX packets again */
dev->trans_start = jiffies;
@@ -1531,16 +1525,8 @@
if (lp->phy_type != 0) {
/* We need to ensure that no calls to
* smc911x_phy_configure are pending.
-
- * flush_scheduled_work() cannot be called because we
- * are running with the netlink semaphore held (from
- * devinet_ioctl()) and the pending work queue
- * contains linkwatch_event() (scheduled by
- * netif_carrier_off() above). linkwatch_event() also
- * wants the netlink semaphore.
*/
- while (lp->work_pending)
- schedule();
+ cancel_work_sync(&lp->phy_configure);
smc911x_phy_powerdown(dev, lp->mii.phy_id);
}
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index a188e33..f2051b2 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1016,15 +1016,8 @@
/* We need to ensure that no calls to smc_phy_configure are
pending.
-
- flush_scheduled_work() cannot be called because we are
- running with the netlink semaphore held (from
- devinet_ioctl()) and the pending work queue contains
- linkwatch_event() (scheduled by netif_carrier_off()
- above). linkwatch_event() also wants the netlink semaphore.
*/
- while(lp->work_pending)
- yield();
+ cancel_work_sync(&lp->phy_configure);
bmcr = smc_phy_read(dev, phy, MII_BMCR);
smc_phy_write(dev, phy, MII_BMCR, bmcr | BMCR_PDOWN);
@@ -1161,7 +1154,6 @@
smc_phy_configure_exit:
SMC_SELECT_BANK(lp, 2);
spin_unlock_irq(&lp->lock);
- lp->work_pending = 0;
}
/*
@@ -1389,11 +1381,8 @@
* smc_phy_configure() calls msleep() which calls schedule_timeout()
* which calls schedule(). Hence we use a work queue.
*/
- if (lp->phy_type != 0) {
- if (schedule_work(&lp->phy_configure)) {
- lp->work_pending = 1;
- }
- }
+ if (lp->phy_type != 0)
+ schedule_work(&lp->phy_configure);
/* We can accept TX packets again */
dev->trans_start = jiffies;
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 69e97a1..86068186 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -93,14 +93,14 @@
#define SMC_insw(a, r, p, l) insw ((unsigned long *)((a) + (r)), p, l)
# endif
/* check if the mac in reg is valid */
-#define SMC_GET_MAC_ADDR(addr) \
+#define SMC_GET_MAC_ADDR(lp, addr) \
do { \
unsigned int __v; \
- __v = SMC_inw(ioaddr, ADDR0_REG); \
+ __v = SMC_inw(ioaddr, ADDR0_REG(lp)); \
addr[0] = __v; addr[1] = __v >> 8; \
- __v = SMC_inw(ioaddr, ADDR1_REG); \
+ __v = SMC_inw(ioaddr, ADDR1_REG(lp)); \
addr[2] = __v; addr[3] = __v >> 8; \
- __v = SMC_inw(ioaddr, ADDR2_REG); \
+ __v = SMC_inw(ioaddr, ADDR2_REG(lp)); \
addr[4] = __v; addr[5] = __v >> 8; \
if (*(u32 *)(&addr[0]) == 0xFFFFFFFF) { \
random_ether_addr(addr); \
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index b4e7f30..1aa425b 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -111,7 +111,7 @@
struct hme_tx_logent *tlp;
unsigned long flags;
- save_and_cli(flags);
+ local_irq_save(flags);
tlp = &tx_log[txlog_cur_entry];
tlp->tstamp = (unsigned int)jiffies;
tlp->tx_new = hp->tx_new;
@@ -119,7 +119,7 @@
tlp->action = a;
tlp->status = s;
txlog_cur_entry = (txlog_cur_entry + 1) & (TX_LOG_LEN - 1);
- restore_flags(flags);
+ local_irq_restore(flags);
}
static __inline__ void tx_dump_log(void)
{
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index 10e4e85..b07b8cb 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -1394,6 +1394,7 @@
tc35815_chip_init(dev);
spin_unlock_irq(&lp->lock);
+ netif_carrier_off(dev);
/* schedule a link state check */
phy_start(lp->phy_dev);
@@ -1735,7 +1736,6 @@
skb = lp->rx_skbs[cur_bd].skb;
prefetch(skb->data);
lp->rx_skbs[cur_bd].skb = NULL;
- lp->fbl_count--;
pci_unmap_single(lp->pci_dev,
lp->rx_skbs[cur_bd].skb_dma,
RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
@@ -1791,6 +1791,7 @@
#ifdef TC35815_USE_PACKEDBUFFER
while (lp->fbl_curid != id)
#else
+ lp->fbl_count--;
while (lp->fbl_count < RX_BUF_NUM)
#endif
{
@@ -2453,6 +2454,7 @@
return 0;
pci_set_power_state(pdev, PCI_D0);
tc35815_restart(dev);
+ netif_carrier_off(dev);
if (lp->phy_dev)
phy_start(lp->phy_dev);
netif_device_attach(dev);
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 07b3f77..cc4bde8 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -64,8 +64,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.92"
-#define DRV_MODULE_RELDATE "May 2, 2008"
+#define DRV_MODULE_VERSION "3.92.1"
+#define DRV_MODULE_RELDATE "June 9, 2008"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -1295,6 +1295,21 @@
GRC_LCLCTRL_GPIO_OUTPUT0 |
GRC_LCLCTRL_GPIO_OUTPUT1),
100);
+ } else if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761) {
+ /* The 5761 non-e device swaps GPIO 0 and GPIO 2. */
+ u32 grc_local_ctrl = GRC_LCLCTRL_GPIO_OE0 |
+ GRC_LCLCTRL_GPIO_OE1 |
+ GRC_LCLCTRL_GPIO_OE2 |
+ GRC_LCLCTRL_GPIO_OUTPUT0 |
+ GRC_LCLCTRL_GPIO_OUTPUT1 |
+ tp->grc_local_ctrl;
+ tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100);
+
+ grc_local_ctrl |= GRC_LCLCTRL_GPIO_OUTPUT2;
+ tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100);
+
+ grc_local_ctrl &= ~GRC_LCLCTRL_GPIO_OUTPUT0;
+ tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100);
} else {
u32 no_gpio2;
u32 grc_local_ctrl = 0;
@@ -3168,8 +3183,7 @@
err |= tg3_readphy(tp, MII_BMCR, &bmcr);
if ((tp->link_config.autoneg == AUTONEG_ENABLE) && !force_reset &&
- (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT) &&
- tp->link_config.flowctrl == tp->link_config.active_flowctrl) {
+ (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT)) {
/* do nothing, just check for link up at the end */
} else if (tp->link_config.autoneg == AUTONEG_ENABLE) {
u32 adv, new_adv;
@@ -8599,7 +8613,7 @@
(cmd->speed == SPEED_1000))
return -EINVAL;
else if ((cmd->speed == SPEED_1000) &&
- (tp->tg3_flags2 & TG3_FLAG_10_100_ONLY))
+ (tp->tg3_flags & TG3_FLAG_10_100_ONLY))
return -EINVAL;
tg3_full_lock(tp, 0);
@@ -11768,6 +11782,15 @@
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755)
tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
+ if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761) {
+ /* Turn off the debug UART. */
+ tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
+ if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
+ /* Keep VMain power. */
+ tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE0 |
+ GRC_LCLCTRL_GPIO_OUTPUT0;
+ }
+
/* Force the chip into D0. */
err = tg3_set_power_state(tp, PCI_D0);
if (err) {
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index f9d13fa..af8d2c4 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -731,7 +731,7 @@
void __iomem *ioaddr = tp->base_addr;
unsigned long flags;
- flush_scheduled_work();
+ cancel_work_sync(&tp->media_work);
#ifdef CONFIG_TULIP_NAPI
napi_disable(&tp->napi);
@@ -1729,12 +1729,15 @@
if (!dev)
return -EINVAL;
- if (netif_running(dev))
- tulip_down(dev);
+ if (!netif_running(dev))
+ goto save_state;
+
+ tulip_down(dev);
netif_device_detach(dev);
free_irq(dev->irq, dev);
+save_state:
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
@@ -1754,6 +1757,9 @@
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
+ if (!netif_running(dev))
+ return 0;
+
if ((retval = pci_enable_device(pdev))) {
printk (KERN_ERR "tulip: pci_enable_device failed in resume\n");
return retval;
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 0ce07a3..b9018bf 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -313,6 +313,21 @@
switch (tun->flags & TUN_TYPE_MASK) {
case TUN_TUN_DEV:
+ if (tun->flags & TUN_NO_PI) {
+ switch (skb->data[0] & 0xf0) {
+ case 0x40:
+ pi.proto = htons(ETH_P_IP);
+ break;
+ case 0x60:
+ pi.proto = htons(ETH_P_IPV6);
+ break;
+ default:
+ tun->dev->stats.rx_dropped++;
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+ }
+
skb_reset_mac_header(skb);
skb->protocol = pi.proto;
skb->dev = tun->dev;
@@ -587,6 +602,12 @@
tun->attached = 1;
get_net(dev_net(tun->dev));
+ /* Make sure persistent devices do not get stuck in
+ * xoff state.
+ */
+ if (netif_running(tun->dev))
+ netif_wake_queue(tun->dev);
+
strcpy(ifr->ifr_name, tun->dev->name);
return 0;
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 299b7f1..f5839c4 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -73,6 +73,7 @@
"tx-frames-ok",
"tx-excessive-differ-frames",
"tx-256-511-frames",
+ "tx-512-1023-frames",
"tx-1024-1518-frames",
"tx-jumbo-frames",
};
@@ -308,7 +309,7 @@
buf += UEC_TX_FW_STATS_LEN * ETH_GSTRING_LEN;
}
if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX)
- memcpy(buf, tx_fw_stat_gstrings, UEC_RX_FW_STATS_LEN *
+ memcpy(buf, rx_fw_stat_gstrings, UEC_RX_FW_STATS_LEN *
ETH_GSTRING_LEN);
}
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index 0dcfc03..7c66b05 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -706,7 +706,7 @@
usb_kill_urb(kaweth->rx_urb);
usb_kill_urb(kaweth->tx_urb);
- flush_scheduled_work();
+ cancel_delayed_work_sync(&kaweth->lowmem_work);
/* a scheduled work may have resubmitted,
we hit them again */
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index fe7cdf2..4452306 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -44,9 +44,16 @@
/* The skb we couldn't send because buffers were full. */
struct sk_buff *last_xmit_skb;
+ /* If we need to free in a timer, this is it. */
+ struct timer_list xmit_free_timer;
+
/* Number of input buffers, and max we've ever had. */
unsigned int num, max;
+ /* For cleaning up after transmission. */
+ struct tasklet_struct tasklet;
+ bool free_in_tasklet;
+
/* Receive & send queues. */
struct sk_buff_head recv;
struct sk_buff_head send;
@@ -68,8 +75,13 @@
/* Suppress further interrupts. */
svq->vq_ops->disable_cb(svq);
- /* We were waiting for more output buffers. */
+
+ /* We were probably waiting for more output buffers. */
netif_wake_queue(vi->dev);
+
+ /* Make sure we re-xmit last_xmit_skb: if there are no more packets
+ * queued, start_xmit won't be called. */
+ tasklet_schedule(&vi->tasklet);
}
static void receive_skb(struct net_device *dev, struct sk_buff *skb,
@@ -86,9 +98,7 @@
BUG_ON(len > MAX_PACKET_LEN);
skb_trim(skb, len);
- skb->protocol = eth_type_trans(skb, dev);
- pr_debug("Receiving skb proto 0x%04x len %i type %i\n",
- ntohs(skb->protocol), skb->len, skb->pkt_type);
+
dev->stats.rx_bytes += skb->len;
dev->stats.rx_packets++;
@@ -98,6 +108,10 @@
goto frame_err;
}
+ skb->protocol = eth_type_trans(skb, dev);
+ pr_debug("Receiving skb proto 0x%04x len %i type %i\n",
+ ntohs(skb->protocol), skb->len, skb->pkt_type);
+
if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) {
pr_debug("GSO!\n");
switch (hdr->gso_type & ~VIRTIO_NET_HDR_GSO_ECN) {
@@ -230,9 +244,25 @@
}
}
+/* If the virtio transport doesn't always notify us when all in-flight packets
+ * are consumed, we fall back to using this function on a timer to free them. */
+static void xmit_free(unsigned long data)
+{
+ struct virtnet_info *vi = (void *)data;
+
+ netif_tx_lock(vi->dev);
+
+ free_old_xmit_skbs(vi);
+
+ if (!skb_queue_empty(&vi->send))
+ mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10));
+
+ netif_tx_unlock(vi->dev);
+}
+
static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
{
- int num;
+ int num, err;
struct scatterlist sg[2+MAX_SKB_FRAGS];
struct virtio_net_hdr *hdr;
const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest;
@@ -275,7 +305,25 @@
vnet_hdr_to_sg(sg, skb);
num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
- return vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
+ err = vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
+ if (!err && !vi->free_in_tasklet)
+ mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10));
+
+ return err;
+}
+
+static void xmit_tasklet(unsigned long data)
+{
+ struct virtnet_info *vi = (void *)data;
+
+ netif_tx_lock_bh(vi->dev);
+ if (vi->last_xmit_skb && xmit_skb(vi, vi->last_xmit_skb) == 0) {
+ vi->svq->vq_ops->kick(vi->svq);
+ vi->last_xmit_skb = NULL;
+ }
+ if (vi->free_in_tasklet)
+ free_old_xmit_skbs(vi);
+ netif_tx_unlock_bh(vi->dev);
}
static int start_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -287,21 +335,25 @@
free_old_xmit_skbs(vi);
/* If we has a buffer left over from last time, send it now. */
- if (vi->last_xmit_skb) {
+ if (unlikely(vi->last_xmit_skb)) {
if (xmit_skb(vi, vi->last_xmit_skb) != 0) {
/* Drop this skb: we only queue one. */
vi->dev->stats.tx_dropped++;
kfree_skb(skb);
+ skb = NULL;
goto stop_queue;
}
vi->last_xmit_skb = NULL;
}
/* Put new one in send queue and do transmit */
- __skb_queue_head(&vi->send, skb);
- if (xmit_skb(vi, skb) != 0) {
- vi->last_xmit_skb = skb;
- goto stop_queue;
+ if (likely(skb)) {
+ __skb_queue_head(&vi->send, skb);
+ if (xmit_skb(vi, skb) != 0) {
+ vi->last_xmit_skb = skb;
+ skb = NULL;
+ goto stop_queue;
+ }
}
done:
vi->svq->vq_ops->kick(vi->svq);
@@ -411,6 +463,10 @@
vi->vdev = vdev;
vdev->priv = vi;
+ /* If they give us a callback when all buffers are done, we don't need
+ * the timer. */
+ vi->free_in_tasklet = virtio_has_feature(vdev,VIRTIO_F_NOTIFY_ON_EMPTY);
+
/* We expect two virtqueues, receive then send. */
vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done);
if (IS_ERR(vi->rvq)) {
@@ -428,6 +484,11 @@
skb_queue_head_init(&vi->recv);
skb_queue_head_init(&vi->send);
+ tasklet_init(&vi->tasklet, xmit_tasklet, (unsigned long)vi);
+
+ if (!vi->free_in_tasklet)
+ setup_timer(&vi->xmit_free_timer, xmit_free, (unsigned long)vi);
+
err = register_netdev(dev);
if (err) {
pr_debug("virtio_net: registering device failed\n");
@@ -465,6 +526,9 @@
/* Stop all the virtqueues. */
vdev->config->reset(vdev);
+ if (!vi->free_in_tasklet)
+ del_timer_sync(&vi->xmit_free_timer);
+
/* Free our skbs in send and recv queues, if any. */
while ((skb = __skb_dequeue(&vi->recv)) != NULL) {
kfree_skb(skb);
@@ -488,7 +552,7 @@
static unsigned int features[] = {
VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC,
VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6,
- VIRTIO_NET_F_HOST_ECN,
+ VIRTIO_NET_F_HOST_ECN, VIRTIO_F_NOTIFY_ON_EMPTY,
};
static struct virtio_driver virtio_net = {
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 520bb0b..6d35155 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -1008,6 +1008,7 @@
stats->rx_bytes += skb->len;
if (pvc->state.becn)
stats->rx_compressed++;
+ skb->dev = dev;
netif_rx(skb);
return NET_RX_SUCCESS;
} else {
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index 249e180..069f8bb 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -32,6 +32,7 @@
#include <linux/x25.h>
#include <linux/lapb.h>
#include <linux/init.h>
+#include <linux/rtnetlink.h>
#include "x25_asy.h"
#include <net/x25device.h>
@@ -601,8 +602,10 @@
if (!sl || sl->magic != X25_ASY_MAGIC)
return;
+ rtnl_lock();
if (sl->dev->flags & IFF_UP)
dev_close(sl->dev);
+ rtnl_unlock();
tty->disc_data = NULL;
sl->tty = NULL;
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 4e1c690..32019fb 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -2905,7 +2905,7 @@
static int waitbusy (struct airo_info *ai) {
int delay = 0;
- while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) {
+ while ((IN4500(ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) {
udelay (10);
if ((++delay % 20) == 0)
OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY);
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index dfa4bdd..d3db298 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -630,7 +630,6 @@
/* Context information for a noise calculation (Link Quality). */
struct b43_noise_calculation {
- u8 channel_at_start;
bool calculation_running;
u8 nr_samples;
s8 samples[8][4];
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 6dcbb3c..e23f2f1 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -795,66 +795,23 @@
{
struct b43_dmaring *ring;
int err;
- int nr_slots;
dma_addr_t dma_test;
ring = kzalloc(sizeof(*ring), GFP_KERNEL);
if (!ring)
goto out;
- ring->type = type;
- nr_slots = B43_RXRING_SLOTS;
+ ring->nr_slots = B43_RXRING_SLOTS;
if (for_tx)
- nr_slots = B43_TXRING_SLOTS;
+ ring->nr_slots = B43_TXRING_SLOTS;
- ring->meta = kcalloc(nr_slots, sizeof(struct b43_dmadesc_meta),
+ ring->meta = kcalloc(ring->nr_slots, sizeof(struct b43_dmadesc_meta),
GFP_KERNEL);
if (!ring->meta)
goto err_kfree_ring;
- if (for_tx) {
- ring->txhdr_cache = kcalloc(nr_slots,
- b43_txhdr_size(dev),
- GFP_KERNEL);
- if (!ring->txhdr_cache)
- goto err_kfree_meta;
- /* test for ability to dma to txhdr_cache */
- dma_test = dma_map_single(dev->dev->dma_dev,
- ring->txhdr_cache,
- b43_txhdr_size(dev),
- DMA_TO_DEVICE);
-
- if (b43_dma_mapping_error(ring, dma_test,
- b43_txhdr_size(dev), 1)) {
- /* ugh realloc */
- kfree(ring->txhdr_cache);
- ring->txhdr_cache = kcalloc(nr_slots,
- b43_txhdr_size(dev),
- GFP_KERNEL | GFP_DMA);
- if (!ring->txhdr_cache)
- goto err_kfree_meta;
-
- dma_test = dma_map_single(dev->dev->dma_dev,
- ring->txhdr_cache,
- b43_txhdr_size(dev),
- DMA_TO_DEVICE);
-
- if (b43_dma_mapping_error(ring, dma_test,
- b43_txhdr_size(dev), 1)) {
-
- b43err(dev->wl,
- "TXHDR DMA allocation failed\n");
- goto err_kfree_txhdr_cache;
- }
- }
-
- dma_unmap_single(dev->dev->dma_dev,
- dma_test, b43_txhdr_size(dev),
- DMA_TO_DEVICE);
- }
-
+ ring->type = type;
ring->dev = dev;
- ring->nr_slots = nr_slots;
ring->mmio_base = b43_dmacontroller_base(type, controller_index);
ring->index = controller_index;
if (type == B43_DMA_64BIT)
@@ -879,6 +836,48 @@
ring->last_injected_overflow = jiffies;
#endif
+ if (for_tx) {
+ ring->txhdr_cache = kcalloc(ring->nr_slots,
+ b43_txhdr_size(dev),
+ GFP_KERNEL);
+ if (!ring->txhdr_cache)
+ goto err_kfree_meta;
+
+ /* test for ability to dma to txhdr_cache */
+ dma_test = dma_map_single(dev->dev->dma_dev,
+ ring->txhdr_cache,
+ b43_txhdr_size(dev),
+ DMA_TO_DEVICE);
+
+ if (b43_dma_mapping_error(ring, dma_test,
+ b43_txhdr_size(dev), 1)) {
+ /* ugh realloc */
+ kfree(ring->txhdr_cache);
+ ring->txhdr_cache = kcalloc(ring->nr_slots,
+ b43_txhdr_size(dev),
+ GFP_KERNEL | GFP_DMA);
+ if (!ring->txhdr_cache)
+ goto err_kfree_meta;
+
+ dma_test = dma_map_single(dev->dev->dma_dev,
+ ring->txhdr_cache,
+ b43_txhdr_size(dev),
+ DMA_TO_DEVICE);
+
+ if (b43_dma_mapping_error(ring, dma_test,
+ b43_txhdr_size(dev), 1)) {
+
+ b43err(dev->wl,
+ "TXHDR DMA allocation failed\n");
+ goto err_kfree_txhdr_cache;
+ }
+ }
+
+ dma_unmap_single(dev->dev->dma_dev,
+ dma_test, b43_txhdr_size(dev),
+ DMA_TO_DEVICE);
+ }
+
err = alloc_ringmemory(ring);
if (err)
goto err_kfree_txhdr_cache;
diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c
index 36a9c42..76f4c7b 100644
--- a/drivers/net/wireless/b43/leds.c
+++ b/drivers/net/wireless/b43/leds.c
@@ -72,6 +72,9 @@
struct b43_wldev *dev = led->dev;
bool radio_enabled;
+ if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED))
+ return;
+
/* Checking the radio-enabled status here is slightly racy,
* but we want to avoid the locking overhead and we don't care
* whether the LED has the wrong state for a second. */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 6c3d9ea..a708277 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1145,7 +1145,6 @@
b43_jssi_write(dev, 0x7F7F7F7F);
b43_write32(dev, B43_MMIO_MACCMD,
b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE);
- B43_WARN_ON(dev->noisecalc.channel_at_start != dev->phy.channel);
}
static void b43_calculate_link_quality(struct b43_wldev *dev)
@@ -1154,7 +1153,6 @@
if (dev->noisecalc.calculation_running)
return;
- dev->noisecalc.channel_at_start = dev->phy.channel;
dev->noisecalc.calculation_running = 1;
dev->noisecalc.nr_samples = 0;
@@ -1171,9 +1169,16 @@
/* Bottom half of Link Quality calculation. */
+ /* Possible race condition: It might be possible that the user
+ * changed to a different channel in the meantime since we
+ * started the calculation. We ignore that fact, since it's
+ * not really that much of a problem. The background noise is
+ * an estimation only anyway. Slightly wrong results will get damped
+ * by the averaging of the 8 sample rounds. Additionally the
+ * value is shortlived. So it will be replaced by the next noise
+ * calculation round soon. */
+
B43_WARN_ON(!dev->noisecalc.calculation_running);
- if (dev->noisecalc.channel_at_start != phy->channel)
- goto drop_calculation;
*((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev));
if (noise[0] == 0x7F || noise[1] == 0x7F ||
noise[2] == 0x7F || noise[3] == 0x7F)
@@ -1214,11 +1219,10 @@
average -= 48;
dev->stats.link_noise = average;
- drop_calculation:
dev->noisecalc.calculation_running = 0;
return;
}
- generate_new:
+generate_new:
b43_generate_noise_sample(dev);
}
@@ -2879,12 +2883,11 @@
if (unlikely(skb->len < 2 + 2 + 6)) {
/* Too short, this can't be a valid frame. */
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
+ goto drop_packet;
}
B43_WARN_ON(skb_shinfo(skb)->nr_frags);
if (unlikely(!dev))
- return NETDEV_TX_BUSY;
+ goto drop_packet;
/* Transmissions on seperate queues can run concurrently. */
read_lock_irqsave(&wl->tx_lock, flags);
@@ -2900,7 +2903,12 @@
read_unlock_irqrestore(&wl->tx_lock, flags);
if (unlikely(err))
- return NETDEV_TX_BUSY;
+ goto drop_packet;
+ return NETDEV_TX_OK;
+
+drop_packet:
+ /* We can not transmit this packet. Drop it. */
+ dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c
index c990f87..93ddc1c 100644
--- a/drivers/net/wireless/b43legacy/dma.c
+++ b/drivers/net/wireless/b43legacy/dma.c
@@ -876,6 +876,7 @@
if (!ring)
goto out;
ring->type = type;
+ ring->dev = dev;
nr_slots = B43legacy_RXRING_SLOTS;
if (for_tx)
@@ -922,7 +923,6 @@
DMA_TO_DEVICE);
}
- ring->dev = dev;
ring->nr_slots = nr_slots;
ring->mmio_base = b43legacy_dmacontroller_base(type, controller_index);
ring->index = controller_index;
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 14a5eea..3e612d0 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2378,8 +2378,10 @@
} else
err = b43legacy_dma_tx(dev, skb, ctl);
out:
- if (unlikely(err))
- return NETDEV_TX_BUSY;
+ if (unlikely(err)) {
+ /* Drop the packet. */
+ dev_kfree_skb_any(skb);
+ }
return NETDEV_TX_OK;
}
@@ -3039,7 +3041,6 @@
/* Locking: wl->mutex */
static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev)
{
- struct b43legacy_wl *wl = dev->wl;
struct b43legacy_phy *phy = &dev->phy;
u32 macctl;
@@ -3054,12 +3055,6 @@
macctl |= B43legacy_MACCTL_PSM_JMP0;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl);
- mutex_unlock(&wl->mutex);
- /* Must unlock as it would otherwise deadlock. No races here.
- * Cancel possibly pending workqueues. */
- cancel_work_sync(&dev->restart_work);
- mutex_lock(&wl->mutex);
-
b43legacy_leds_exit(dev);
b43legacy_rng_exit(dev->wl);
b43legacy_pio_free(dev);
@@ -3486,6 +3481,8 @@
}
}
out:
+ if (err)
+ wl->current_dev = NULL; /* Failed to init the dev. */
mutex_unlock(&wl->mutex);
if (err)
b43legacyerr(wl, "Controller restart FAILED\n");
@@ -3618,9 +3615,11 @@
struct b43legacy_wldev *wldev;
struct b43legacy_wl *wl;
+ /* Do not cancel ieee80211-workqueue based work here.
+ * See comment in b43legacy_remove(). */
+
wldev = ssb_get_drvdata(dev);
wl = wldev->wl;
- cancel_work_sync(&wldev->restart_work);
b43legacy_debugfs_remove_device(wldev);
b43legacy_wireless_core_detach(wldev);
list_del(&wldev->list);
@@ -3789,6 +3788,10 @@
struct b43legacy_wl *wl = ssb_get_devtypedata(dev);
struct b43legacy_wldev *wldev = ssb_get_drvdata(dev);
+ /* We must cancel any work here before unregistering from ieee80211,
+ * as the ieee80211 unreg will destroy the workqueue. */
+ cancel_work_sync(&wldev->restart_work);
+
B43legacy_WARN_ON(!wl);
if (wl->current_dev == wldev)
ieee80211_unregister_hw(wl->hw);
diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c
index 4fd7380..020f450 100644
--- a/drivers/net/wireless/hostap/hostap_80211_rx.c
+++ b/drivers/net/wireless/hostap/hostap_80211_rx.c
@@ -64,7 +64,7 @@
int hdrlen, phdrlen, head_need, tail_need;
u16 fc;
int prism_header, ret;
- struct ieee80211_hdr_4addr *hdr;
+ struct ieee80211_hdr_4addr *fhdr;
iface = netdev_priv(dev);
local = iface->local;
@@ -83,8 +83,8 @@
phdrlen = 0;
}
- hdr = (struct ieee80211_hdr_4addr *) skb->data;
- fc = le16_to_cpu(hdr->frame_ctl);
+ fhdr = (struct ieee80211_hdr_4addr *) skb->data;
+ fc = le16_to_cpu(fhdr->frame_ctl);
if (type == PRISM2_RX_MGMT && (fc & IEEE80211_FCTL_VERS)) {
printk(KERN_DEBUG "%s: dropped management frame with header "
@@ -551,7 +551,7 @@
hdr->addr1[2] != 0xff || hdr->addr1[3] != 0xff ||
hdr->addr1[4] != 0xff || hdr->addr1[5] != 0xff)) {
/* RA (or BSSID) is not ours - drop */
- PDEBUG(DEBUG_EXTRA, "%s: received WDS frame with "
+ PDEBUG(DEBUG_EXTRA2, "%s: received WDS frame with "
"not own or broadcast %s=%s\n",
local->dev->name,
fc & IEEE80211_FCTL_FROMDS ? "RA" : "BSSID",
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index 0acd958..ab981af 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -1930,7 +1930,7 @@
PDEBUG(DEBUG_PS, " PSPOLL and AID[15:14] not set\n");
return;
}
- aid &= ~BIT(15) & ~BIT(14);
+ aid &= ~(BIT(15) | BIT(14));
if (aid == 0 || aid > MAX_AID_TABLE_SIZE) {
PDEBUG(DEBUG_PS, " invalid aid=%d\n", aid);
return;
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index ed4317a1..3b4e55c 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -533,10 +533,10 @@
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
#define CFG_CHECK2(fn, retf) \
-do { int ret = (retf); \
-if (ret != 0) { \
- PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", ret); \
- cs_error(link, fn, ret); \
+do { int _ret = (retf); \
+if (_ret != 0) { \
+ PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", _ret); \
+ cs_error(link, fn, _ret); \
goto next_entry; \
} \
} while (0)
@@ -777,8 +777,10 @@
int dev_open = 0;
struct hostap_interface *iface = NULL;
- if (dev)
- iface = netdev_priv(dev);
+ if (!dev)
+ return -ENODEV;
+
+ iface = netdev_priv(dev);
PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_SUSPEND\n", dev_info);
if (iface && iface->local)
@@ -798,8 +800,10 @@
int dev_open = 0;
struct hostap_interface *iface = NULL;
- if (dev)
- iface = netdev_priv(dev);
+ if (!dev)
+ return -ENODEV;
+
+ iface = netdev_priv(dev);
PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_RESUME\n", dev_info);
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index cdf90c4..936f52e 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -2835,7 +2835,7 @@
{
local_info_t *local = (local_info_t *) data;
struct net_device *dev = local->dev;
- u16 channel;
+ u16 chan;
if (local->passive_scan_interval <= 0)
return;
@@ -2872,11 +2872,11 @@
printk(KERN_DEBUG "%s: passive scan channel %d\n",
dev->name, local->passive_scan_channel);
- channel = local->passive_scan_channel;
+ chan = local->passive_scan_channel;
local->passive_scan_state = PASSIVE_SCAN_WAIT;
local->passive_scan_timer.expires = jiffies + HZ / 10;
} else {
- channel = local->channel;
+ chan = local->channel;
local->passive_scan_state = PASSIVE_SCAN_LISTEN;
local->passive_scan_timer.expires = jiffies +
local->passive_scan_interval * HZ;
@@ -2884,9 +2884,9 @@
if (hfa384x_cmd_callback(dev, HFA384X_CMDCODE_TEST |
(HFA384X_TEST_CHANGE_CHANNEL << 8),
- channel, NULL, 0))
+ chan, NULL, 0))
printk(KERN_ERR "%s: passive scan channel set %d "
- "failed\n", dev->name, channel);
+ "failed\n", dev->name, chan);
add_timer(&local->passive_scan_timer);
}
diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c
index 20d387f..a38e85f 100644
--- a/drivers/net/wireless/hostap/hostap_main.c
+++ b/drivers/net/wireless/hostap/hostap_main.c
@@ -594,7 +594,8 @@
}
-int hostap_80211_header_parse(const struct sk_buff *skb, unsigned char *haddr)
+static int hostap_80211_header_parse(const struct sk_buff *skb,
+ unsigned char *haddr)
{
struct hostap_interface *iface = netdev_priv(skb->dev);
local_info_t *local = iface->local;
@@ -682,7 +683,13 @@
netif_device_detach(dev);
}
- flush_scheduled_work();
+ cancel_work_sync(&local->reset_queue);
+ cancel_work_sync(&local->set_multicast_list_queue);
+ cancel_work_sync(&local->set_tim_queue);
+#ifndef PRISM2_NO_STATION_MODES
+ cancel_work_sync(&local->info_queue);
+#endif
+ cancel_work_sync(&local->comms_qual_update);
module_put(local->hw_module);
@@ -851,7 +858,6 @@
.rebuild = eth_rebuild_header,
.cache = eth_header_cache,
.cache_update = eth_header_cache_update,
-
.parse = hostap_80211_header_parse,
};
EXPORT_SYMBOL(hostap_80211_ops);
@@ -1144,7 +1150,6 @@
EXPORT_SYMBOL(hostap_set_auth_algs);
EXPORT_SYMBOL(hostap_dump_rx_header);
EXPORT_SYMBOL(hostap_dump_tx_header);
-EXPORT_SYMBOL(hostap_80211_header_parse);
EXPORT_SYMBOL(hostap_80211_get_hdrlen);
EXPORT_SYMBOL(hostap_get_stats);
EXPORT_SYMBOL(hostap_setup_dev);
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index d74c061..6e70460 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -1753,6 +1753,8 @@
if (priv->workqueue) {
cancel_delayed_work(&priv->request_scan);
+ cancel_delayed_work(&priv->request_direct_scan);
+ cancel_delayed_work(&priv->request_passive_scan);
cancel_delayed_work(&priv->scan_event);
}
queue_work(priv->workqueue, &priv->down);
@@ -2005,6 +2007,8 @@
wake_up_interruptible(&priv->wait_command_queue);
priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
cancel_delayed_work(&priv->request_scan);
+ cancel_delayed_work(&priv->request_direct_scan);
+ cancel_delayed_work(&priv->request_passive_scan);
cancel_delayed_work(&priv->scan_event);
schedule_work(&priv->link_down);
queue_delayed_work(priv->workqueue, &priv->rf_kill, 2 * HZ);
@@ -4712,6 +4716,12 @@
priv->status &= ~STATUS_SCAN_FORCED;
#endif /* CONFIG_IPW2200_MONITOR */
+ /* Do queued direct scans first */
+ if (priv->status & STATUS_DIRECT_SCAN_PENDING) {
+ queue_delayed_work(priv->workqueue,
+ &priv->request_direct_scan, 0);
+ }
+
if (!(priv->status & (STATUS_ASSOCIATED |
STATUS_ASSOCIATING |
STATUS_ROAMING |
@@ -6267,7 +6277,7 @@
}
}
-static int ipw_request_scan_helper(struct ipw_priv *priv, int type)
+static int ipw_request_scan_helper(struct ipw_priv *priv, int type, int direct)
{
struct ipw_scan_request_ext scan;
int err = 0, scan_type;
@@ -6278,22 +6288,31 @@
mutex_lock(&priv->mutex);
+ if (direct && (priv->direct_scan_ssid_len == 0)) {
+ IPW_DEBUG_HC("Direct scan requested but no SSID to scan for\n");
+ priv->status &= ~STATUS_DIRECT_SCAN_PENDING;
+ goto done;
+ }
+
if (priv->status & STATUS_SCANNING) {
- IPW_DEBUG_HC("Concurrent scan requested. Ignoring.\n");
- priv->status |= STATUS_SCAN_PENDING;
+ IPW_DEBUG_HC("Concurrent scan requested. Queuing.\n");
+ priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING :
+ STATUS_SCAN_PENDING;
goto done;
}
if (!(priv->status & STATUS_SCAN_FORCED) &&
priv->status & STATUS_SCAN_ABORTING) {
IPW_DEBUG_HC("Scan request while abort pending. Queuing.\n");
- priv->status |= STATUS_SCAN_PENDING;
+ priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING :
+ STATUS_SCAN_PENDING;
goto done;
}
if (priv->status & STATUS_RF_KILL_MASK) {
- IPW_DEBUG_HC("Aborting scan due to RF Kill activation\n");
- priv->status |= STATUS_SCAN_PENDING;
+ IPW_DEBUG_HC("Queuing scan due to RF Kill activation\n");
+ priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING :
+ STATUS_SCAN_PENDING;
goto done;
}
@@ -6321,6 +6340,7 @@
cpu_to_le16(20);
scan.dwell_time[IPW_SCAN_PASSIVE_FULL_DWELL_SCAN] = cpu_to_le16(120);
+ scan.dwell_time[IPW_SCAN_ACTIVE_DIRECT_SCAN] = cpu_to_le16(20);
#ifdef CONFIG_IPW2200_MONITOR
if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
@@ -6360,13 +6380,23 @@
cpu_to_le16(2000);
} else {
#endif /* CONFIG_IPW2200_MONITOR */
- /* If we are roaming, then make this a directed scan for the
- * current network. Otherwise, ensure that every other scan
- * is a fast channel hop scan */
- if ((priv->status & STATUS_ROAMING)
- || (!(priv->status & STATUS_ASSOCIATED)
- && (priv->config & CFG_STATIC_ESSID)
- && (le32_to_cpu(scan.full_scan_index) % 2))) {
+ /* Honor direct scans first, otherwise if we are roaming make
+ * this a direct scan for the current network. Finally,
+ * ensure that every other scan is a fast channel hop scan */
+ if (direct) {
+ err = ipw_send_ssid(priv, priv->direct_scan_ssid,
+ priv->direct_scan_ssid_len);
+ if (err) {
+ IPW_DEBUG_HC("Attempt to send SSID command "
+ "failed\n");
+ goto done;
+ }
+
+ scan_type = IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN;
+ } else if ((priv->status & STATUS_ROAMING)
+ || (!(priv->status & STATUS_ASSOCIATED)
+ && (priv->config & CFG_STATIC_ESSID)
+ && (le32_to_cpu(scan.full_scan_index) % 2))) {
err = ipw_send_ssid(priv, priv->essid, priv->essid_len);
if (err) {
IPW_DEBUG_HC("Attempt to send SSID command "
@@ -6391,7 +6421,12 @@
}
priv->status |= STATUS_SCANNING;
- priv->status &= ~STATUS_SCAN_PENDING;
+ if (direct) {
+ priv->status &= ~STATUS_DIRECT_SCAN_PENDING;
+ priv->direct_scan_ssid_len = 0;
+ } else
+ priv->status &= ~STATUS_SCAN_PENDING;
+
queue_delayed_work(priv->workqueue, &priv->scan_check,
IPW_SCAN_CHECK_WATCHDOG);
done:
@@ -6402,15 +6437,22 @@
static void ipw_request_passive_scan(struct work_struct *work)
{
struct ipw_priv *priv =
- container_of(work, struct ipw_priv, request_passive_scan);
- ipw_request_scan_helper(priv, IW_SCAN_TYPE_PASSIVE);
+ container_of(work, struct ipw_priv, request_passive_scan.work);
+ ipw_request_scan_helper(priv, IW_SCAN_TYPE_PASSIVE, 0);
}
static void ipw_request_scan(struct work_struct *work)
{
struct ipw_priv *priv =
container_of(work, struct ipw_priv, request_scan.work);
- ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE);
+ ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE, 0);
+}
+
+static void ipw_request_direct_scan(struct work_struct *work)
+{
+ struct ipw_priv *priv =
+ container_of(work, struct ipw_priv, request_direct_scan.work);
+ ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE, 1);
}
static void ipw_bg_abort_scan(struct work_struct *work)
@@ -7558,8 +7600,31 @@
priv->ieee->iw_mode == IW_MODE_ADHOC &&
priv->config & CFG_ADHOC_CREATE &&
priv->config & CFG_STATIC_ESSID &&
- priv->config & CFG_STATIC_CHANNEL &&
- !list_empty(&priv->ieee->network_free_list)) {
+ priv->config & CFG_STATIC_CHANNEL) {
+ /* Use oldest network if the free list is empty */
+ if (list_empty(&priv->ieee->network_free_list)) {
+ struct ieee80211_network *oldest = NULL;
+ struct ieee80211_network *target;
+ DECLARE_MAC_BUF(mac);
+
+ list_for_each_entry(target, &priv->ieee->network_list, list) {
+ if ((oldest == NULL) ||
+ (target->last_scanned < oldest->last_scanned))
+ oldest = target;
+ }
+
+ /* If there are no more slots, expire the oldest */
+ list_del(&oldest->list);
+ target = oldest;
+ IPW_DEBUG_ASSOC("Expired '%s' (%s) from "
+ "network list.\n",
+ escape_essid(target->ssid,
+ target->ssid_len),
+ print_mac(mac, target->bssid));
+ list_add_tail(&target->list,
+ &priv->ieee->network_free_list);
+ }
+
element = priv->ieee->network_free_list.next;
network = list_entry(element, struct ieee80211_network, list);
ipw_adhoc_create(priv, network);
@@ -9454,99 +9519,38 @@
return 0;
}
-static int ipw_request_direct_scan(struct ipw_priv *priv, char *essid,
- int essid_len)
-{
- struct ipw_scan_request_ext scan;
- int err = 0, scan_type;
-
- if (!(priv->status & STATUS_INIT) ||
- (priv->status & STATUS_EXIT_PENDING))
- return 0;
-
- mutex_lock(&priv->mutex);
-
- if (priv->status & STATUS_RF_KILL_MASK) {
- IPW_DEBUG_HC("Aborting scan due to RF kill activation\n");
- priv->status |= STATUS_SCAN_PENDING;
- goto done;
- }
-
- IPW_DEBUG_HC("starting request direct scan!\n");
-
- if (priv->status & (STATUS_SCANNING | STATUS_SCAN_ABORTING)) {
- /* We should not sleep here; otherwise we will block most
- * of the system (for instance, we hold rtnl_lock when we
- * get here).
- */
- err = -EAGAIN;
- goto done;
- }
- memset(&scan, 0, sizeof(scan));
-
- if (priv->config & CFG_SPEED_SCAN)
- scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_SCAN] =
- cpu_to_le16(30);
- else
- scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_SCAN] =
- cpu_to_le16(20);
-
- scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN] =
- cpu_to_le16(20);
- scan.dwell_time[IPW_SCAN_PASSIVE_FULL_DWELL_SCAN] = cpu_to_le16(120);
- scan.dwell_time[IPW_SCAN_ACTIVE_DIRECT_SCAN] = cpu_to_le16(20);
-
- scan.full_scan_index = cpu_to_le32(ieee80211_get_scans(priv->ieee));
-
- err = ipw_send_ssid(priv, essid, essid_len);
- if (err) {
- IPW_DEBUG_HC("Attempt to send SSID command failed\n");
- goto done;
- }
- scan_type = IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN;
-
- ipw_add_scan_channels(priv, &scan, scan_type);
-
- err = ipw_send_scan_request_ext(priv, &scan);
- if (err) {
- IPW_DEBUG_HC("Sending scan command failed: %08X\n", err);
- goto done;
- }
-
- priv->status |= STATUS_SCANNING;
-
- done:
- mutex_unlock(&priv->mutex);
- return err;
-}
-
static int ipw_wx_set_scan(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
struct ipw_priv *priv = ieee80211_priv(dev);
struct iw_scan_req *req = (struct iw_scan_req *)extra;
+ struct delayed_work *work = NULL;
mutex_lock(&priv->mutex);
+
priv->user_requested_scan = 1;
- mutex_unlock(&priv->mutex);
if (wrqu->data.length == sizeof(struct iw_scan_req)) {
if (wrqu->data.flags & IW_SCAN_THIS_ESSID) {
- ipw_request_direct_scan(priv, req->essid,
- req->essid_len);
- return 0;
+ int len = min((int)req->essid_len,
+ (int)sizeof(priv->direct_scan_ssid));
+ memcpy(priv->direct_scan_ssid, req->essid, len);
+ priv->direct_scan_ssid_len = len;
+ work = &priv->request_direct_scan;
+ } else if (req->scan_type == IW_SCAN_TYPE_PASSIVE) {
+ work = &priv->request_passive_scan;
}
- if (req->scan_type == IW_SCAN_TYPE_PASSIVE) {
- queue_work(priv->workqueue,
- &priv->request_passive_scan);
- return 0;
- }
+ } else {
+ /* Normal active broadcast scan */
+ work = &priv->request_scan;
}
+ mutex_unlock(&priv->mutex);
+
IPW_DEBUG_WX("Start scan\n");
- queue_delayed_work(priv->workqueue, &priv->request_scan, 0);
+ queue_delayed_work(priv->workqueue, work, 0);
return 0;
}
@@ -10708,6 +10712,8 @@
}
cancel_delayed_work(&priv->request_scan);
+ cancel_delayed_work(&priv->request_direct_scan);
+ cancel_delayed_work(&priv->request_passive_scan);
cancel_delayed_work(&priv->scan_event);
ipw_reset_stats(priv);
/* Ensure the rate is updated immediately */
@@ -10738,6 +10744,8 @@
/* Cancel any queued work ... */
cancel_delayed_work(&priv->request_scan);
+ cancel_delayed_work(&priv->request_direct_scan);
+ cancel_delayed_work(&priv->request_passive_scan);
cancel_delayed_work(&priv->adhoc_check);
cancel_delayed_work(&priv->gather_stats);
@@ -10777,8 +10785,9 @@
INIT_WORK(&priv->up, ipw_bg_up);
INIT_WORK(&priv->down, ipw_bg_down);
INIT_DELAYED_WORK(&priv->request_scan, ipw_request_scan);
+ INIT_DELAYED_WORK(&priv->request_direct_scan, ipw_request_direct_scan);
+ INIT_DELAYED_WORK(&priv->request_passive_scan, ipw_request_passive_scan);
INIT_DELAYED_WORK(&priv->scan_event, ipw_scan_event);
- INIT_WORK(&priv->request_passive_scan, ipw_request_passive_scan);
INIT_DELAYED_WORK(&priv->gather_stats, ipw_bg_gather_stats);
INIT_WORK(&priv->abort_scan, ipw_bg_abort_scan);
INIT_WORK(&priv->roam, ipw_bg_roam);
@@ -11812,6 +11821,8 @@
cancel_delayed_work(&priv->adhoc_check);
cancel_delayed_work(&priv->gather_stats);
cancel_delayed_work(&priv->request_scan);
+ cancel_delayed_work(&priv->request_direct_scan);
+ cancel_delayed_work(&priv->request_passive_scan);
cancel_delayed_work(&priv->scan_event);
cancel_delayed_work(&priv->rf_kill);
cancel_delayed_work(&priv->scan_check);
diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2200.h
index cd3295b..d4ab28b 100644
--- a/drivers/net/wireless/ipw2200.h
+++ b/drivers/net/wireless/ipw2200.h
@@ -1037,6 +1037,7 @@
#define STATUS_DISASSOC_PENDING (1<<12)
#define STATUS_STATE_PENDING (1<<13)
+#define STATUS_DIRECT_SCAN_PENDING (1<<19)
#define STATUS_SCAN_PENDING (1<<20)
#define STATUS_SCANNING (1<<21)
#define STATUS_SCAN_ABORTING (1<<22)
@@ -1292,6 +1293,8 @@
struct iw_public_data wireless_data;
int user_requested_scan;
+ u8 direct_scan_ssid[IW_ESSID_MAX_SIZE];
+ u8 direct_scan_ssid_len;
struct workqueue_struct *workqueue;
@@ -1301,8 +1304,9 @@
struct work_struct system_config;
struct work_struct rx_replenish;
struct delayed_work request_scan;
+ struct delayed_work request_direct_scan;
+ struct delayed_work request_passive_scan;
struct delayed_work scan_event;
- struct work_struct request_passive_scan;
struct work_struct adapter_restart;
struct delayed_work rf_kill;
struct work_struct up;
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
index d200d08..8b1528e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
@@ -229,14 +229,15 @@
led->led_dev.brightness_set = iwl3945_led_brightness_set;
led->led_dev.default_trigger = trigger;
+ led->priv = priv;
+ led->type = type;
+
ret = led_classdev_register(device, &led->led_dev);
if (ret) {
IWL_ERROR("Error: failed to register led handler.\n");
return ret;
}
- led->priv = priv;
- led->type = type;
led->registered = 1;
if (set_led && led->led_on)
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 62a3d8f..55ac850 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -449,7 +449,7 @@
if (print_summary) {
char *title;
- u32 rate;
+ int rate;
if (hundred)
title = "100Frames";
@@ -487,7 +487,7 @@
* but you can hack it to show more, if you'd like to. */
if (dataframe)
IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, "
- "len=%u, rssi=%d, chnl=%d, rate=%u, \n",
+ "len=%u, rssi=%d, chnl=%d, rate=%d, \n",
title, fc, header->addr1[5],
length, rssi, channel, rate);
else {
@@ -588,8 +588,12 @@
if (rate == -1)
iwl3945_rt->rt_rate = 0;
- else
+ else {
+ if (stats->band == IEEE80211_BAND_5GHZ)
+ rate += IWL_FIRST_OFDM_RATE;
+
iwl3945_rt->rt_rate = iwl3945_rates[rate].ieee;
+ }
/* antenna number */
antenna = phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK;
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index bf19eb8..de330ae 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -3528,8 +3528,12 @@
if (rate == -1)
iwl4965_rt->rt_rate = 0;
- else
+ else {
+ if (stats->band == IEEE80211_BAND_5GHZ)
+ rate += IWL_FIRST_OFDM_RATE;
+
iwl4965_rt->rt_rate = iwl4965_rates[rate].ieee;
+ }
/*
* "antenna number"
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 13925b6..6027e11 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -2227,7 +2227,10 @@
}
IWL_DEBUG_INFO("Starting scan...\n");
- priv->scan_bands = 2;
+ if (priv->cfg->sku & IWL_SKU_G)
+ priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
+ if (priv->cfg->sku & IWL_SKU_A)
+ priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
set_bit(STATUS_SCANNING, &priv->status);
priv->scan_start = jiffies;
priv->scan_pass_start = priv->scan_start;
@@ -3352,13 +3355,18 @@
cancel_delayed_work(&priv->scan_check);
IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
- (priv->scan_bands == 2) ? "2.4" : "5.2",
+ (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
+ "2.4" : "5.2",
jiffies_to_msecs(elapsed_jiffies
(priv->scan_pass_start, jiffies)));
- /* Remove this scanned band from the list
- * of pending bands to scan */
- priv->scan_bands--;
+ /* Remove this scanned band from the list of pending
+ * bands to scan, band G precedes A in order of scanning
+ * as seen in iwl3945_bg_request_scan */
+ if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
+ priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
+ else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ))
+ priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
/* If a request to abort was given, or the scan did not succeed
* then we reset the scan state machine and terminate,
@@ -4972,7 +4980,7 @@
ch_info = iwl3945_get_channel_info(priv, band, scan_ch->channel);
if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
+ IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
scan_ch->channel);
continue;
}
@@ -6315,21 +6323,16 @@
/* flags + rate selection */
- switch (priv->scan_bands) {
- case 2:
+ if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
scan->tx_cmd.rate = IWL_RATE_1M_PLCP;
scan->good_CRC_th = 0;
band = IEEE80211_BAND_2GHZ;
- break;
-
- case 1:
+ } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
scan->good_CRC_th = IWL_GOOD_CRC_TH;
band = IEEE80211_BAND_5GHZ;
- break;
-
- default:
+ } else {
IWL_WARNING("Invalid scan band count\n");
goto done;
}
@@ -6684,7 +6687,8 @@
if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
IWL_DEBUG_MAC80211("leave - monitor\n");
- return -1;
+ dev_kfree_skb_any(skb);
+ return 0;
}
IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
@@ -6770,7 +6774,7 @@
ch_info = iwl3945_get_channel_info(priv, conf->channel->band,
conf->channel->hw_value);
if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this SKU.\n",
+ IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this band.\n",
conf->channel->hw_value, conf->channel->band);
IWL_DEBUG_MAC80211("leave - invalid channel\n");
spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index 883b42f..0bd55bb 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -1774,7 +1774,10 @@
}
IWL_DEBUG_INFO("Starting scan...\n");
- priv->scan_bands = 2;
+ if (priv->cfg->sku & IWL_SKU_G)
+ priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
+ if (priv->cfg->sku & IWL_SKU_A)
+ priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
set_bit(STATUS_SCANNING, &priv->status);
priv->scan_start = jiffies;
priv->scan_pass_start = priv->scan_start;
@@ -3023,8 +3026,9 @@
IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index);
if (index != -1) {
- int freed = iwl4965_tx_queue_reclaim(priv, txq_id, index);
#ifdef CONFIG_IWL4965_HT
+ int freed = iwl4965_tx_queue_reclaim(priv, txq_id, index);
+
if (tid != MAX_TID_COUNT)
priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
if (iwl4965_queue_space(&txq->q) > txq->q.low_mark &&
@@ -3276,13 +3280,18 @@
cancel_delayed_work(&priv->scan_check);
IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
- (priv->scan_bands == 2) ? "2.4" : "5.2",
+ (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
+ "2.4" : "5.2",
jiffies_to_msecs(elapsed_jiffies
(priv->scan_pass_start, jiffies)));
- /* Remove this scanned band from the list
- * of pending bands to scan */
- priv->scan_bands--;
+ /* Remove this scanned band from the list of pending
+ * bands to scan, band G precedes A in order of scanning
+ * as seen in iwl_bg_request_scan */
+ if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
+ priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
+ else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ))
+ priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
/* If a request to abort was given, or the scan did not succeed
* then we reset the scan state machine and terminate,
@@ -3292,7 +3301,7 @@
clear_bit(STATUS_SCAN_ABORTING, &priv->status);
} else {
/* If there are more bands on this scan pass reschedule */
- if (priv->scan_bands > 0)
+ if (priv->scan_bands)
goto reschedule;
}
@@ -4635,10 +4644,9 @@
scan_ch->channel = ieee80211_frequency_to_channel(channels[i].center_freq);
- ch_info = iwl_get_channel_info(priv, band,
- scan_ch->channel);
+ ch_info = iwl_get_channel_info(priv, band, scan_ch->channel);
if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
+ IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
scan_ch->channel);
continue;
}
@@ -5830,8 +5838,7 @@
scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
- switch (priv->scan_bands) {
- case 2:
+ if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
scan->tx_cmd.rate_n_flags =
iwl4965_hw_set_rate_n_flags(IWL_RATE_1M_PLCP,
@@ -5839,17 +5846,13 @@
scan->good_CRC_th = 0;
band = IEEE80211_BAND_2GHZ;
- break;
-
- case 1:
+ } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
scan->tx_cmd.rate_n_flags =
iwl4965_hw_set_rate_n_flags(IWL_RATE_6M_PLCP,
RATE_MCS_ANT_B_MSK);
scan->good_CRC_th = IWL_GOOD_CRC_TH;
band = IEEE80211_BAND_5GHZ;
- break;
-
- default:
+ } else {
IWL_WARNING("Invalid scan band count\n");
goto done;
}
@@ -6234,7 +6237,8 @@
if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
IWL_DEBUG_MAC80211("leave - monitor\n");
- return -1;
+ dev_kfree_skb_any(skb);
+ return 0;
}
IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 6328b95..8124fd9 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1842,6 +1842,9 @@
spin_lock_irqsave(&priv->driver_lock, flags);
+ /* We don't get a response on the sleep-confirmation */
+ priv->dnld_sent = DNLD_RES_RECEIVED;
+
/* If nothing to do, go back to sleep (?) */
if (!__kfifo_len(priv->event_fifo) && !priv->resp_len[priv->resp_idx])
priv->psstate = PS_STATE_SLEEP;
@@ -1904,12 +1907,12 @@
lbs_deb_enter(LBS_DEB_HOST);
+ spin_lock_irqsave(&priv->driver_lock, flags);
if (priv->dnld_sent) {
allowed = 0;
lbs_deb_host("dnld_sent was set\n");
}
- spin_lock_irqsave(&priv->driver_lock, flags);
/* In-progress command? */
if (priv->cur_cmd) {
allowed = 0;
diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
index ad2fabc..0aa0ce3 100644
--- a/drivers/net/wireless/libertas/debugfs.c
+++ b/drivers/net/wireless/libertas/debugfs.c
@@ -312,8 +312,8 @@
if (tlv_type != TLV_TYPE_BCNMISS)
tlv->freq = freq;
- /* The command header, the event mask, and the one TLV */
- events->hdr.size = cpu_to_le16(sizeof(events->hdr) + 2 + sizeof(*tlv));
+ /* The command header, the action, the event mask, and one TLV */
+ events->hdr.size = cpu_to_le16(sizeof(events->hdr) + 4 + sizeof(*tlv));
ret = lbs_cmd_with_response(priv, CMD_802_11_SUBSCRIBE_EVENT, events);
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index 8032df7..36288b2 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -925,6 +925,7 @@
.id_table = if_usb_table,
.suspend = if_usb_suspend,
.resume = if_usb_resume,
+ .reset_resume = if_usb_resume,
};
static int __init if_usb_init_module(void)
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index e1f0660..acfc4bf 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -732,8 +732,8 @@
lbs_deb_thread("4: currenttxskb %p, dnld_sent %d\n",
priv->currenttxskb, priv->dnld_sent);
- spin_lock_irq(&priv->driver_lock);
/* Process any pending command response */
+ spin_lock_irq(&priv->driver_lock);
resp_idx = priv->resp_idx;
if (priv->resp_len[resp_idx]) {
spin_unlock_irq(&priv->driver_lock);
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index d448c970..387d4878 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -567,11 +567,11 @@
pos += 8;
/* beacon interval is 2 bytes long */
- bss->beaconperiod = le16_to_cpup((void *) pos);
+ bss->beaconperiod = get_unaligned_le16(pos);
pos += 2;
/* capability information is 2 bytes long */
- bss->capability = le16_to_cpup((void *) pos);
+ bss->capability = get_unaligned_le16(pos);
lbs_deb_scan("process_bss: capabilities 0x%04x\n", bss->capability);
pos += 2;
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 98ddbb3..1610a730 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -49,6 +49,7 @@
{USB_DEVICE(0x5041, 0x2235)}, /* Linksys WUSB54G Portable */
/* Version 2 devices (3887) */
+ {USB_DEVICE(0x0471, 0x1230)}, /* Philips CPWUA054/00 */
{USB_DEVICE(0x050d, 0x7050)}, /* Belkin F5D7050 ver 1000 */
{USB_DEVICE(0x0572, 0x2000)}, /* Cohiba Proto board */
{USB_DEVICE(0x0572, 0x2002)}, /* Cohiba Proto board */
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
index 762e85b..e43bae9 100644
--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -290,7 +290,7 @@
avs->version = cpu_to_be32(P80211CAPTURE_VERSION);
avs->length = cpu_to_be32(sizeof (struct avs_80211_1_header));
- avs->mactime = cpu_to_be64(le64_to_cpu(clock));
+ avs->mactime = cpu_to_be64(clock);
avs->hosttime = cpu_to_be64(jiffies);
avs->phytype = cpu_to_be32(6); /*OFDM: 6 for (g), 8 for (a) */
avs->channel = cpu_to_be32(channel_of_freq(freq));
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index ab1029e..2d61187 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -32,12 +32,13 @@
config RT2X00_LIB_RFKILL
boolean
depends on RT2X00_LIB
+ depends on INPUT
select RFKILL
select INPUT_POLLDEV
config RT2X00_LIB_LEDS
boolean
- depends on RT2X00_LIB
+ depends on RT2X00_LIB && NEW_LEDS
config RT2400PCI
tristate "Ralink rt2400 pci/pcmcia support"
@@ -51,7 +52,7 @@
config RT2400PCI_RFKILL
bool "RT2400 rfkill support"
- depends on RT2400PCI
+ depends on RT2400PCI && INPUT
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt2400 devices that feature a
@@ -60,7 +61,7 @@
config RT2400PCI_LEDS
bool "RT2400 leds support"
- depends on RT2400PCI
+ depends on RT2400PCI && NEW_LEDS
select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
@@ -78,7 +79,7 @@
config RT2500PCI_RFKILL
bool "RT2500 rfkill support"
- depends on RT2500PCI
+ depends on RT2500PCI && INPUT
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt2500 devices that feature a
@@ -87,7 +88,7 @@
config RT2500PCI_LEDS
bool "RT2500 leds support"
- depends on RT2500PCI
+ depends on RT2500PCI && NEW_LEDS
select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
@@ -107,7 +108,7 @@
config RT61PCI_RFKILL
bool "RT61 rfkill support"
- depends on RT61PCI
+ depends on RT61PCI && INPUT
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt61 devices that feature a
@@ -116,7 +117,7 @@
config RT61PCI_LEDS
bool "RT61 leds support"
- depends on RT61PCI
+ depends on RT61PCI && NEW_LEDS
select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
@@ -133,7 +134,7 @@
config RT2500USB_LEDS
bool "RT2500 leds support"
- depends on RT2500USB
+ depends on RT2500USB && NEW_LEDS
select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
@@ -152,7 +153,7 @@
config RT73USB_LEDS
bool "RT73 leds support"
- depends on RT73USB
+ depends on RT73USB && NEW_LEDS
select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 560b9c7..b36ed1c 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -731,6 +731,17 @@
(rt2x00dev->rx->data_size / 128));
rt2x00pci_register_write(rt2x00dev, CSR9, reg);
+ rt2x00pci_register_read(rt2x00dev, CSR14, ®);
+ rt2x00_set_field32(®, CSR14_TSF_COUNT, 0);
+ rt2x00_set_field32(®, CSR14_TSF_SYNC, 0);
+ rt2x00_set_field32(®, CSR14_TBCN, 0);
+ rt2x00_set_field32(®, CSR14_TCFP, 0);
+ rt2x00_set_field32(®, CSR14_TATIMW, 0);
+ rt2x00_set_field32(®, CSR14_BEACON_GEN, 0);
+ rt2x00_set_field32(®, CSR14_CFP_COUNT_PRELOAD, 0);
+ rt2x00_set_field32(®, CSR14_TBCM_PRELOAD, 0);
+ rt2x00pci_register_write(rt2x00dev, CSR14, reg);
+
rt2x00pci_register_write(rt2x00dev, CNT3, 0x3f080000);
rt2x00pci_register_read(rt2x00dev, ARCSR0, ®);
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index a5ed54b..f7731fb 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -824,6 +824,17 @@
rt2x00_set_field32(®, CSR11_CW_SELECT, 0);
rt2x00pci_register_write(rt2x00dev, CSR11, reg);
+ rt2x00pci_register_read(rt2x00dev, CSR14, ®);
+ rt2x00_set_field32(®, CSR14_TSF_COUNT, 0);
+ rt2x00_set_field32(®, CSR14_TSF_SYNC, 0);
+ rt2x00_set_field32(®, CSR14_TBCN, 0);
+ rt2x00_set_field32(®, CSR14_TCFP, 0);
+ rt2x00_set_field32(®, CSR14_TATIMW, 0);
+ rt2x00_set_field32(®, CSR14_BEACON_GEN, 0);
+ rt2x00_set_field32(®, CSR14_CFP_COUNT_PRELOAD, 0);
+ rt2x00_set_field32(®, CSR14_TBCM_PRELOAD, 0);
+ rt2x00pci_register_write(rt2x00dev, CSR14, reg);
+
rt2x00pci_register_write(rt2x00dev, CNT3, 0);
rt2x00pci_register_read(rt2x00dev, TXCSR8, ®);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index fdbd0ef..d90512f 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -138,11 +138,8 @@
* Wait until the BBP becomes ready.
*/
reg = rt2500usb_bbp_check(rt2x00dev);
- if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
- ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n");
- mutex_unlock(&rt2x00dev->usb_cache_mutex);
- return;
- }
+ if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
+ goto exit_fail;
/*
* Write the data into the BBP.
@@ -155,6 +152,13 @@
rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+ return;
+
+exit_fail:
+ mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+ ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n");
}
static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
@@ -168,10 +172,8 @@
* Wait until the BBP becomes ready.
*/
reg = rt2500usb_bbp_check(rt2x00dev);
- if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
- ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
- return;
- }
+ if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
+ goto exit_fail;
/*
* Write the request into the BBP.
@@ -186,17 +188,21 @@
* Wait until the BBP becomes ready.
*/
reg = rt2500usb_bbp_check(rt2x00dev);
- if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
- ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
- *value = 0xff;
- mutex_unlock(&rt2x00dev->usb_cache_mutex);
- return;
- }
+ if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
+ goto exit_fail;
rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, ®);
*value = rt2x00_get_field16(reg, PHY_CSR7_DATA);
mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+ return;
+
+exit_fail:
+ mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+ ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
+ *value = 0xff;
}
static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev,
@@ -795,6 +801,13 @@
rt2x00_set_field16(®, TXRX_CSR8_BBP_ID1_VALID, 0);
rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg);
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®);
+ rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 0);
+ rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, 0);
+ rt2x00_set_field16(®, TXRX_CSR19_TBCN, 0);
+ rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+
rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f);
rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d);
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 611d983..b4bf1e0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -821,6 +821,7 @@
/*
* Scheduled work.
*/
+ struct workqueue_struct *workqueue;
struct work_struct intf_work;
struct work_struct filter_work;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 2673d56..c997d4f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -75,7 +75,7 @@
rt2x00lib_reset_link_tuner(rt2x00dev);
- queue_delayed_work(rt2x00dev->hw->workqueue,
+ queue_delayed_work(rt2x00dev->workqueue,
&rt2x00dev->link.work, LINK_TUNE_INTERVAL);
}
@@ -137,14 +137,6 @@
return;
/*
- * Stop all scheduled work.
- */
- if (work_pending(&rt2x00dev->intf_work))
- cancel_work_sync(&rt2x00dev->intf_work);
- if (work_pending(&rt2x00dev->filter_work))
- cancel_work_sync(&rt2x00dev->filter_work);
-
- /*
* Stop the TX queues.
*/
ieee80211_stop_queues(rt2x00dev->hw);
@@ -398,8 +390,8 @@
* Increase tuner counter, and reschedule the next link tuner run.
*/
rt2x00dev->link.count++;
- queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work,
- LINK_TUNE_INTERVAL);
+ queue_delayed_work(rt2x00dev->workqueue,
+ &rt2x00dev->link.work, LINK_TUNE_INTERVAL);
}
static void rt2x00lib_packetfilter_scheduled(struct work_struct *work)
@@ -433,6 +425,15 @@
spin_unlock(&intf->lock);
+ /*
+ * It is possible the radio was disabled while the work had been
+ * scheduled. If that happens we should return here immediately,
+ * note that in the spinlock protected area above the delayed_flags
+ * have been cleared correctly.
+ */
+ if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ return;
+
if (delayed_flags & DELAYED_UPDATE_BEACON) {
skb = ieee80211_beacon_get(rt2x00dev->hw, vif, &control);
if (skb && rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw,
@@ -441,7 +442,7 @@
}
if (delayed_flags & DELAYED_CONFIG_ERP)
- rt2x00lib_config_erp(rt2x00dev, intf, &intf->conf);
+ rt2x00lib_config_erp(rt2x00dev, intf, &conf);
if (delayed_flags & DELAYED_LED_ASSOC)
rt2x00leds_led_assoc(rt2x00dev, !!rt2x00dev->intf_associated);
@@ -487,7 +488,7 @@
rt2x00lib_beacondone_iter,
rt2x00dev);
- queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work);
+ queue_work(rt2x00dev->workqueue, &rt2x00dev->intf_work);
}
EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
@@ -1130,6 +1131,10 @@
/*
* Initialize configuration work.
*/
+ rt2x00dev->workqueue = create_singlethread_workqueue("rt2x00lib");
+ if (!rt2x00dev->workqueue)
+ goto exit;
+
INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
INIT_WORK(&rt2x00dev->filter_work, rt2x00lib_packetfilter_scheduled);
INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00lib_link_tuner);
@@ -1190,6 +1195,13 @@
rt2x00leds_unregister(rt2x00dev);
/*
+ * Stop all queued work. Note that most tasks will already be halted
+ * during rt2x00lib_disable_radio() and rt2x00lib_uninitialize().
+ */
+ flush_workqueue(rt2x00dev->workqueue);
+ destroy_workqueue(rt2x00dev->workqueue);
+
+ /*
* Free ieee80211_hw memory.
*/
rt2x00lib_remove_hw(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 87e280a..9cb023e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -428,7 +428,7 @@
if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags))
rt2x00dev->ops->lib->config_filter(rt2x00dev, *total_flags);
else
- queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work);
+ queue_work(rt2x00dev->workqueue, &rt2x00dev->filter_work);
}
EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter);
@@ -509,7 +509,7 @@
memcpy(&intf->conf, bss_conf, sizeof(*bss_conf));
if (delayed) {
intf->delayed_flags |= delayed;
- queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work);
+ queue_work(rt2x00dev->workqueue, &rt2x00dev->intf_work);
}
spin_unlock(&intf->lock);
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 971af25..60893de 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -412,8 +412,7 @@
if (pci_set_mwi(pci_dev))
ERROR_PROBE("MWI not available.\n");
- if (pci_set_dma_mask(pci_dev, DMA_64BIT_MASK) &&
- pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) {
+ if (pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) {
ERROR_PROBE("PCI DMA not supported.\n");
retval = -EIO;
goto exit_disable_device;
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 5a33167..e5ceae8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -362,6 +362,12 @@
}
}
+ /*
+ * Kill guardian urb (if required by driver).
+ */
+ if (!test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags))
+ return;
+
for (i = 0; i < rt2x00dev->bcn->limit; i++) {
priv_bcn = rt2x00dev->bcn->entries[i].priv_data;
usb_kill_urb(priv_bcn->urb);
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 14bc7b2..c3afb5c 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1201,6 +1201,15 @@
rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR8, reg);
+ rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®);
+ rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, 0);
+ rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0);
+ rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0);
+ rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0);
+ rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0);
+ rt2x00_set_field32(®, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0);
+ rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+
rt2x00pci_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
rt2x00pci_register_write(rt2x00dev, MAC_CSR6, 0x00000fff);
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index da19a3a..46e9e08 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -134,11 +134,8 @@
* Wait until the BBP becomes ready.
*/
reg = rt73usb_bbp_check(rt2x00dev);
- if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
- ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
- mutex_unlock(&rt2x00dev->usb_cache_mutex);
- return;
- }
+ if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
+ goto exit_fail;
/*
* Write the data into the BBP.
@@ -151,6 +148,13 @@
rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+ return;
+
+exit_fail:
+ mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+ ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
}
static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
@@ -164,11 +168,8 @@
* Wait until the BBP becomes ready.
*/
reg = rt73usb_bbp_check(rt2x00dev);
- if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
- ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
- mutex_unlock(&rt2x00dev->usb_cache_mutex);
- return;
- }
+ if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
+ goto exit_fail;
/*
* Write the request into the BBP.
@@ -184,14 +185,19 @@
* Wait until the BBP becomes ready.
*/
reg = rt73usb_bbp_check(rt2x00dev);
- if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
- ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
- *value = 0xff;
- return;
- }
+ if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
+ goto exit_fail;
*value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+ return;
+
+exit_fail:
+ mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+ ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
+ *value = 0xff;
}
static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev,
@@ -1000,6 +1006,15 @@
rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42);
rt73usb_register_write(rt2x00dev, TXRX_CSR8, reg);
+ rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®);
+ rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, 0);
+ rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0);
+ rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0);
+ rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0);
+ rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0);
+ rt2x00_set_field32(®, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0);
+ rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
+
rt73usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
rt73usb_register_read(rt2x00dev, MAC_CSR6, ®);
@@ -2131,6 +2146,7 @@
/* D-Link */
{ USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) },
/* Gemtek */
{ USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 6424e5a..694e95d 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -719,7 +719,7 @@
fc = le16_to_cpu(*((__le16 *) buffer));
is_qos = ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) &&
- ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_QOS_DATA);
+ (fc & IEEE80211_STYPE_QOS_DATA);
is_4addr = (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS);
need_padding = is_qos ^ is_4addr;
@@ -765,6 +765,7 @@
{
struct zd_mac *mac = zd_hw_mac(hw);
mac->type = IEEE80211_IF_TYPE_INVALID;
+ zd_set_beacon_interval(&mac->chip, 0);
zd_write_mac_addr(&mac->chip, NULL);
}
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 8941f5e..6cdad97 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -64,6 +64,7 @@
{ USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x050d, 0x705c), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x083a, 0xe506), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x083a, 0x4505), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x13b1, 0x0024), .driver_info = DEVICE_ZD1211B },
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index d26f69b..ef671d1 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1324,7 +1324,7 @@
goto fail;
}
- txs = (struct xen_netif_tx_sring *)get_zeroed_page(GFP_KERNEL);
+ txs = (struct xen_netif_tx_sring *)get_zeroed_page(GFP_NOIO | __GFP_HIGH);
if (!txs) {
err = -ENOMEM;
xenbus_dev_fatal(dev, err, "allocating tx ring page");
@@ -1340,7 +1340,7 @@
}
info->tx_ring_ref = err;
- rxs = (struct xen_netif_rx_sring *)get_zeroed_page(GFP_KERNEL);
+ rxs = (struct xen_netif_rx_sring *)get_zeroed_page(GFP_NOIO | __GFP_HIGH);
if (!rxs) {
err = -ENOMEM;
xenbus_dev_fatal(dev, err, "allocating rx ring page");
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index 715a444..b2ccdcb 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -21,7 +21,6 @@
};
static struct i2c_driver_device i2c_devices[] = {
- { "dallas,ds1374", "rtc-ds1374" },
};
static int of_find_i2c_driver(struct device_node *node,
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index ec8f700..39bb96b 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -178,8 +178,7 @@
int ret;
int begin, end, i;
- if (pos < 0 || pos > PCI_VPD_PCI22_SIZE ||
- size > PCI_VPD_PCI22_SIZE - pos)
+ if (pos < 0 || pos > vpd->base.len || size > vpd->base.len - pos)
return -EINVAL;
if (size == 0)
return 0;
@@ -223,8 +222,8 @@
u32 val;
int ret;
- if (pos < 0 || pos > PCI_VPD_PCI22_SIZE || pos & 3 ||
- size > PCI_VPD_PCI22_SIZE - pos || size < 4)
+ if (pos < 0 || pos > vpd->base.len || pos & 3 ||
+ size > vpd->base.len - pos || size < 4)
return -EINVAL;
val = (u8) *buf++;
@@ -255,11 +254,6 @@
return 4;
}
-static int pci_vpd_pci22_get_size(struct pci_dev *dev)
-{
- return PCI_VPD_PCI22_SIZE;
-}
-
static void pci_vpd_pci22_release(struct pci_dev *dev)
{
kfree(container_of(dev->vpd, struct pci_vpd_pci22, base));
@@ -268,7 +262,6 @@
static struct pci_vpd_ops pci_vpd_pci22_ops = {
.read = pci_vpd_pci22_read,
.write = pci_vpd_pci22_write,
- .get_size = pci_vpd_pci22_get_size,
.release = pci_vpd_pci22_release,
};
@@ -284,6 +277,7 @@
if (!vpd)
return -ENOMEM;
+ vpd->base.len = PCI_VPD_PCI22_SIZE;
vpd->base.ops = &pci_vpd_pci22_ops;
spin_lock_init(&vpd->lock);
vpd->cap = cap;
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 648596d..91156f8 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -700,9 +700,10 @@
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
cleanup_p2p_bridge, NULL, NULL);
- if (!(bridge = acpiphp_handle_to_bridge(handle)))
- return AE_OK;
- cleanup_bridge(bridge);
+ bridge = acpiphp_handle_to_bridge(handle);
+ if (bridge)
+ cleanup_bridge(bridge);
+
return AE_OK;
}
@@ -715,9 +716,19 @@
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
(u32)1, cleanup_p2p_bridge, NULL, NULL);
+ /*
+ * On root bridges with hotplug slots directly underneath (ie,
+ * no p2p bridge inbetween), we call cleanup_bridge().
+ *
+ * The else clause cleans up root bridges that either had no
+ * hotplug slots at all, or had a p2p bridge underneath.
+ */
bridge = acpiphp_handle_to_bridge(handle);
if (bridge)
cleanup_bridge(bridge);
+ else
+ acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+ handle_hotplug_event_bridge);
}
static struct pci_dev * get_apic_pci_info(acpi_handle handle)
diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c
index e32148a..779c5db 100644
--- a/drivers/pci/hotplug/rpadlpar_sysfs.c
+++ b/drivers/pci/hotplug/rpadlpar_sysfs.c
@@ -18,8 +18,12 @@
#include "rpadlpar.h"
#define DLPAR_KOBJ_NAME "control"
-#define ADD_SLOT_ATTR_NAME "add_slot"
-#define REMOVE_SLOT_ATTR_NAME "remove_slot"
+
+/* Those two have no quotes because they are passed to __ATTR() which
+ * stringifies the argument (yuck !)
+ */
+#define ADD_SLOT_ATTR_NAME add_slot
+#define REMOVE_SLOT_ATTR_NAME remove_slot
#define MAX_DRC_NAME_LEN 64
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 72cf61e..e1637bd 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -181,7 +181,7 @@
any need to change it. */
struct mempolicy *oldpol;
cpumask_t oldmask = current->cpus_allowed;
- int node = pcibus_to_node(dev->bus);
+ int node = dev_to_node(&dev->dev);
if (node >= 0) {
node_to_cpumask_ptr(nodecpumask, node);
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 271d41c..9c71858 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -489,13 +489,13 @@
* @kobj: kobject for mapping
* @attr: struct bin_attribute for the file being mapped
* @vma: struct vm_area_struct passed into the mmap
+ * @write_combine: 1 for write_combine mapping
*
* Use the regular PCI mapping routines to map a PCI resource into userspace.
- * FIXME: write combining? maybe automatic for prefetchable regions?
*/
static int
pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
- struct vm_area_struct *vma)
+ struct vm_area_struct *vma, int write_combine)
{
struct pci_dev *pdev = to_pci_dev(container_of(kobj,
struct device, kobj));
@@ -518,7 +518,21 @@
vma->vm_pgoff += start >> PAGE_SHIFT;
mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
- return pci_mmap_page_range(pdev, vma, mmap_type, 0);
+ return pci_mmap_page_range(pdev, vma, mmap_type, write_combine);
+}
+
+static int
+pci_mmap_resource_uc(struct kobject *kobj, struct bin_attribute *attr,
+ struct vm_area_struct *vma)
+{
+ return pci_mmap_resource(kobj, attr, vma, 0);
+}
+
+static int
+pci_mmap_resource_wc(struct kobject *kobj, struct bin_attribute *attr,
+ struct vm_area_struct *vma)
+{
+ return pci_mmap_resource(kobj, attr, vma, 1);
}
/**
@@ -541,9 +555,46 @@
sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
kfree(res_attr);
}
+
+ res_attr = pdev->res_attr_wc[i];
+ if (res_attr) {
+ sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
+ kfree(res_attr);
+ }
}
}
+static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine)
+{
+ /* allocate attribute structure, piggyback attribute name */
+ int name_len = write_combine ? 13 : 10;
+ struct bin_attribute *res_attr;
+ int retval;
+
+ res_attr = kzalloc(sizeof(*res_attr) + name_len, GFP_ATOMIC);
+ if (res_attr) {
+ char *res_attr_name = (char *)(res_attr + 1);
+
+ if (write_combine) {
+ pdev->res_attr_wc[num] = res_attr;
+ sprintf(res_attr_name, "resource%d_wc", num);
+ res_attr->mmap = pci_mmap_resource_wc;
+ } else {
+ pdev->res_attr[num] = res_attr;
+ sprintf(res_attr_name, "resource%d", num);
+ res_attr->mmap = pci_mmap_resource_uc;
+ }
+ res_attr->attr.name = res_attr_name;
+ res_attr->attr.mode = S_IRUSR | S_IWUSR;
+ res_attr->size = pci_resource_len(pdev, num);
+ res_attr->private = &pdev->resource[num];
+ retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
+ } else
+ retval = -ENOMEM;
+
+ return retval;
+}
+
/**
* pci_create_resource_files - create resource files in sysfs for @dev
* @dev: dev in question
@@ -557,31 +608,19 @@
/* Expose the PCI resources from this device as files */
for (i = 0; i < PCI_ROM_RESOURCE; i++) {
- struct bin_attribute *res_attr;
/* skip empty resources */
if (!pci_resource_len(pdev, i))
continue;
- /* allocate attribute structure, piggyback attribute name */
- res_attr = kzalloc(sizeof(*res_attr) + 10, GFP_ATOMIC);
- if (res_attr) {
- char *res_attr_name = (char *)(res_attr + 1);
+ retval = pci_create_attr(pdev, i, 0);
+ /* for prefetchable resources, create a WC mappable file */
+ if (!retval && pdev->resource[i].flags & IORESOURCE_PREFETCH)
+ retval = pci_create_attr(pdev, i, 1);
- pdev->res_attr[i] = res_attr;
- sprintf(res_attr_name, "resource%d", i);
- res_attr->attr.name = res_attr_name;
- res_attr->attr.mode = S_IRUSR | S_IWUSR;
- res_attr->size = pci_resource_len(pdev, i);
- res_attr->mmap = pci_mmap_resource;
- res_attr->private = &pdev->resource[i];
- retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
- if (retval) {
- pci_remove_resource_files(pdev);
- return retval;
- }
- } else {
- return -ENOMEM;
+ if (retval) {
+ pci_remove_resource_files(pdev);
+ return retval;
}
}
return 0;
@@ -697,9 +736,9 @@
attr = kzalloc(sizeof(*attr), GFP_ATOMIC);
if (attr) {
pdev->vpd->attr = attr;
- attr->size = pdev->vpd->ops->get_size(pdev);
+ attr->size = pdev->vpd->len;
attr->attr.name = "vpd";
- attr->attr.mode = S_IRUGO | S_IWUSR;
+ attr->attr.mode = S_IRUSR | S_IWUSR;
attr->read = pci_read_vpd;
attr->write = pci_write_vpd;
retval = sysfs_create_bin_file(&pdev->dev.kobj, attr);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 0a497c1b..00408c9 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -21,11 +21,11 @@
struct pci_vpd_ops {
int (*read)(struct pci_dev *dev, int pos, int size, char *buf);
int (*write)(struct pci_dev *dev, int pos, int size, const char *buf);
- int (*get_size)(struct pci_dev *dev);
void (*release)(struct pci_dev *dev);
};
struct pci_vpd {
+ unsigned int len;
struct pci_vpd_ops *ops;
struct bin_attribute *attr; /* descriptor for sysfs VPD entry */
};
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index dabb563..338a3f9 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1670,6 +1670,48 @@
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching);
+/*
+ * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
+ * VPD end tag will hang the device. This problem was initially
+ * observed when a vpd entry was created in sysfs
+ * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry
+ * will dump 32k of data. Reading a full 32k will cause an access
+ * beyond the VPD end tag causing the device to hang. Once the device
+ * is hung, the bnx2 driver will not be able to reset the device.
+ * We believe that it is legal to read beyond the end tag and
+ * therefore the solution is to limit the read/write length.
+ */
+static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
+{
+ /* Only disable the VPD capability for 5706, 5708, and 5709 rev. A */
+ if ((dev->device == PCI_DEVICE_ID_NX2_5706) ||
+ (dev->device == PCI_DEVICE_ID_NX2_5708) ||
+ ((dev->device == PCI_DEVICE_ID_NX2_5709) &&
+ (dev->revision & 0xf0) == 0x0)) {
+ if (dev->vpd)
+ dev->vpd->len = 0x80;
+ }
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5706,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5706S,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5708,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5708S,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5709,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5709S,
+ quirk_brcm_570x_limit_vpd);
+
#ifdef CONFIG_PCI_MSI
/* Some chipsets do not support MSI. We cannot easily rely on setting
* PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
@@ -1685,6 +1727,7 @@
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi);
/* Disable MSI on chipsets that are known to not support it */
diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c
index 0a6cea1..52d0aa8 100644
--- a/drivers/pcmcia/electra_cf.c
+++ b/drivers/pcmcia/electra_cf.c
@@ -352,6 +352,7 @@
},
{},
};
+MODULE_DEVICE_TABLE(of, electra_cf_match);
static struct of_platform_driver electra_cf_driver = {
.name = (char *)driver_name,
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 0201c8a..46c791a 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -50,15 +50,17 @@
flags = IORESOURCE_IRQ_HIGHEDGE;
}
- if (shareable)
+ if (shareable == ACPI_SHARED)
flags |= IORESOURCE_IRQ_SHAREABLE;
return flags;
}
-static void decode_irq_flags(int flag, int *triggering, int *polarity)
+static void decode_irq_flags(struct pnp_dev *dev, int flags, int *triggering,
+ int *polarity, int *shareable)
{
- switch (flag) {
+ switch (flags & (IORESOURCE_IRQ_LOWLEVEL | IORESOURCE_IRQ_HIGHLEVEL |
+ IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE)) {
case IORESOURCE_IRQ_LOWLEVEL:
*triggering = ACPI_LEVEL_SENSITIVE;
*polarity = ACPI_ACTIVE_LOW;
@@ -75,7 +77,18 @@
*triggering = ACPI_EDGE_SENSITIVE;
*polarity = ACPI_ACTIVE_HIGH;
break;
+ default:
+ dev_err(&dev->dev, "can't encode invalid IRQ mode %#x\n",
+ flags);
+ *triggering = ACPI_EDGE_SENSITIVE;
+ *polarity = ACPI_ACTIVE_HIGH;
+ break;
}
+
+ if (flags & IORESOURCE_IRQ_SHAREABLE)
+ *shareable = ACPI_SHARED;
+ else
+ *shareable = ACPI_EXCLUSIVE;
}
static void pnpacpi_parse_allocated_irqresource(struct pnp_dev *dev,
@@ -742,6 +755,9 @@
if (pnpacpi_supported_resource(res)) {
(*resource)->type = res->type;
(*resource)->length = sizeof(struct acpi_resource);
+ if (res->type == ACPI_RESOURCE_TYPE_IRQ)
+ (*resource)->data.irq.descriptor_length =
+ res->data.irq.descriptor_length;
(*resource)++;
}
@@ -788,22 +804,21 @@
struct resource *p)
{
struct acpi_resource_irq *irq = &resource->data.irq;
- int triggering, polarity;
+ int triggering, polarity, shareable;
- decode_irq_flags(p->flags & IORESOURCE_BITS, &triggering, &polarity);
+ decode_irq_flags(dev, p->flags, &triggering, &polarity, &shareable);
irq->triggering = triggering;
irq->polarity = polarity;
- if (triggering == ACPI_EDGE_SENSITIVE)
- irq->sharable = ACPI_EXCLUSIVE;
- else
- irq->sharable = ACPI_SHARED;
+ irq->sharable = shareable;
irq->interrupt_count = 1;
irq->interrupts[0] = p->start;
- dev_dbg(&dev->dev, " encode irq %d %s %s %s\n", (int) p->start,
+ dev_dbg(&dev->dev, " encode irq %d %s %s %s (%d-byte descriptor)\n",
+ (int) p->start,
triggering == ACPI_LEVEL_SENSITIVE ? "level" : "edge",
polarity == ACPI_ACTIVE_LOW ? "low" : "high",
- irq->sharable == ACPI_SHARED ? "shared" : "exclusive");
+ irq->sharable == ACPI_SHARED ? "shared" : "exclusive",
+ irq->descriptor_length);
}
static void pnpacpi_encode_ext_irq(struct pnp_dev *dev,
@@ -811,16 +826,13 @@
struct resource *p)
{
struct acpi_resource_extended_irq *extended_irq = &resource->data.extended_irq;
- int triggering, polarity;
+ int triggering, polarity, shareable;
- decode_irq_flags(p->flags & IORESOURCE_BITS, &triggering, &polarity);
+ decode_irq_flags(dev, p->flags, &triggering, &polarity, &shareable);
extended_irq->producer_consumer = ACPI_CONSUMER;
extended_irq->triggering = triggering;
extended_irq->polarity = polarity;
- if (triggering == ACPI_EDGE_SENSITIVE)
- extended_irq->sharable = ACPI_EXCLUSIVE;
- else
- extended_irq->sharable = ACPI_SHARED;
+ extended_irq->sharable = shareable;
extended_irq->interrupt_count = 1;
extended_irq->interrupts[0] = p->start;
diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c
index e2b7de4..1ff3bb5 100644
--- a/drivers/pnp/quirks.c
+++ b/drivers/pnp/quirks.c
@@ -286,7 +286,7 @@
pci_name(pdev), i,
(unsigned long long) pci_start,
(unsigned long long) pci_end);
- res->flags = 0;
+ res->flags |= IORESOURCE_DISABLED;
}
}
}
diff --git a/drivers/pnp/system.c b/drivers/pnp/system.c
index 9c2496d..cf4e07b 100644
--- a/drivers/pnp/system.c
+++ b/drivers/pnp/system.c
@@ -81,7 +81,7 @@
}
for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, i)); i++) {
- if (res->flags & IORESOURCE_UNSET)
+ if (res->flags & (IORESOURCE_UNSET | IORESOURCE_DISABLED))
continue;
reserve_range(dev, res->start, res->end, 0);
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index c444d6b..49215da 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -201,7 +201,7 @@
dev_dbg(dev, "uevent\n");
- if (!psy) {
+ if (!psy || !psy->dev) {
dev_dbg(dev, "No power supply yet\n");
return ret;
}
diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c
index 3ce9f3d..956d3e7 100644
--- a/drivers/rapidio/rio-driver.c
+++ b/drivers/rapidio/rio-driver.c
@@ -101,8 +101,8 @@
if (error >= 0) {
rdev->driver = rdrv;
error = 0;
+ } else
rio_dev_put(rdev);
- }
}
return error;
}
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 6cc2c03..4949dc4 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -256,6 +256,17 @@
This driver can also be built as a module. If so the module
will be called rtc-s35390a.
+config RTC_DRV_FM3130
+ tristate "Ramtron FM3130"
+ help
+ If you say Y here you will get support for the
+ Ramtron FM3130 RTC chips.
+ Ramtron FM3130 is a chip with two separate devices inside,
+ RTC clock and FRAM. This driver provides only RTC functionality.
+
+ This driver can also be built as a module. If so the module
+ will be called rtc-fm3130.
+
endif # I2C
comment "SPI RTC drivers"
@@ -534,4 +545,12 @@
help
If you say yes here you get support for the Ricoh RS5C313 RTC chips.
+config RTC_DRV_PPC
+ tristate "PowerPC machine dependent RTC support"
+ depends on PPC_MERGE
+ help
+ The PowerPC kernel has machine-specific functions for accessing
+ the RTC. This exposes that functionality through the generic RTC
+ class.
+
endif # RTC_CLASS
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 872f1218f..b6e14d5 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -31,6 +31,7 @@
obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o
obj-$(CONFIG_RTC_DRV_EP93XX) += rtc-ep93xx.o
+obj-$(CONFIG_RTC_DRV_FM3130) += rtc-fm3130.o
obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o
obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
@@ -41,6 +42,7 @@
obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o
obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o
obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o
+obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o
obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o
obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o
obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 7e3ad4f..58b7336 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -126,12 +126,25 @@
int err;
struct rtc_time before, now;
int first_time = 1;
+ unsigned long t_now, t_alm;
+ enum { none, day, month, year } missing = none;
+ unsigned days;
- /* The lower level RTC driver may not be capable of filling
- * in all fields of the rtc_time struct (eg. rtc-cmos),
- * and so might instead return -1 in some fields.
- * We deal with that here by grabbing a current RTC timestamp
- * and using values from that for any missing (-1) values.
+ /* The lower level RTC driver may return -1 in some fields,
+ * creating invalid alarm->time values, for reasons like:
+ *
+ * - The hardware may not be capable of filling them in;
+ * many alarms match only on time-of-day fields, not
+ * day/month/year calendar data.
+ *
+ * - Some hardware uses illegal values as "wildcard" match
+ * values, which non-Linux firmware (like a BIOS) may try
+ * to set up as e.g. "alarm 15 minutes after each hour".
+ * Linux uses only oneshot alarms.
+ *
+ * When we see that here, we deal with it by using values from
+ * a current RTC timestamp for any missing (-1) values. The
+ * RTC driver prevents "periodic alarm" modes.
*
* But this can be racey, because some fields of the RTC timestamp
* may have wrapped in the interval since we read the RTC alarm,
@@ -174,6 +187,10 @@
if (!alarm->enabled)
return 0;
+ /* full-function RTCs won't have such missing fields */
+ if (rtc_valid_tm(&alarm->time) == 0)
+ return 0;
+
/* get the "after" timestamp, to detect wrapped fields */
err = rtc_read_time(rtc, &now);
if (err < 0)
@@ -183,22 +200,85 @@
} while ( before.tm_min != now.tm_min
|| before.tm_hour != now.tm_hour
|| before.tm_mon != now.tm_mon
- || before.tm_year != now.tm_year
- || before.tm_isdst != now.tm_isdst);
+ || before.tm_year != now.tm_year);
- /* Fill in any missing alarm fields using the timestamp */
+ /* Fill in the missing alarm fields using the timestamp; we
+ * know there's at least one since alarm->time is invalid.
+ */
if (alarm->time.tm_sec == -1)
alarm->time.tm_sec = now.tm_sec;
if (alarm->time.tm_min == -1)
alarm->time.tm_min = now.tm_min;
if (alarm->time.tm_hour == -1)
alarm->time.tm_hour = now.tm_hour;
- if (alarm->time.tm_mday == -1)
+
+ /* For simplicity, only support date rollover for now */
+ if (alarm->time.tm_mday == -1) {
alarm->time.tm_mday = now.tm_mday;
- if (alarm->time.tm_mon == -1)
+ missing = day;
+ }
+ if (alarm->time.tm_mon == -1) {
alarm->time.tm_mon = now.tm_mon;
- if (alarm->time.tm_year == -1)
+ if (missing == none)
+ missing = month;
+ }
+ if (alarm->time.tm_year == -1) {
alarm->time.tm_year = now.tm_year;
+ if (missing == none)
+ missing = year;
+ }
+
+ /* with luck, no rollover is needed */
+ rtc_tm_to_time(&now, &t_now);
+ rtc_tm_to_time(&alarm->time, &t_alm);
+ if (t_now < t_alm)
+ goto done;
+
+ switch (missing) {
+
+ /* 24 hour rollover ... if it's now 10am Monday, an alarm that
+ * that will trigger at 5am will do so at 5am Tuesday, which
+ * could also be in the next month or year. This is a common
+ * case, especially for PCs.
+ */
+ case day:
+ dev_dbg(&rtc->dev, "alarm rollover: %s\n", "day");
+ t_alm += 24 * 60 * 60;
+ rtc_time_to_tm(t_alm, &alarm->time);
+ break;
+
+ /* Month rollover ... if it's the 31th, an alarm on the 3rd will
+ * be next month. An alarm matching on the 30th, 29th, or 28th
+ * may end up in the month after that! Many newer PCs support
+ * this type of alarm.
+ */
+ case month:
+ dev_dbg(&rtc->dev, "alarm rollover: %s\n", "month");
+ do {
+ if (alarm->time.tm_mon < 11)
+ alarm->time.tm_mon++;
+ else {
+ alarm->time.tm_mon = 0;
+ alarm->time.tm_year++;
+ }
+ days = rtc_month_days(alarm->time.tm_mon,
+ alarm->time.tm_year);
+ } while (days < alarm->time.tm_mday);
+ break;
+
+ /* Year rollover ... easy except for leap years! */
+ case year:
+ dev_dbg(&rtc->dev, "alarm rollover: %s\n", "year");
+ do {
+ alarm->time.tm_year++;
+ } while (!rtc_valid_tm(&alarm->time));
+ break;
+
+ default:
+ dev_warn(&rtc->dev, "alarm rollover not handled\n");
+ }
+
+done:
return 0;
}
EXPORT_SYMBOL_GPL(rtc_read_alarm);
diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c
index 42244f1..2ef8cdf 100644
--- a/drivers/rtc/rtc-at32ap700x.c
+++ b/drivers/rtc/rtc-at32ap700x.c
@@ -94,8 +94,11 @@
{
struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
+ spin_lock_irq(&rtc->lock);
rtc_time_to_tm(rtc->alarm_time, &alrm->time);
- alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0;
+ alrm->enabled = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0;
+ alrm->pending = rtc_readl(rtc, ISR) & RTC_BIT(ISR_TOPI) ? 1 : 0;
+ spin_unlock_irq(&rtc->lock);
return 0;
}
@@ -119,7 +122,7 @@
spin_lock_irq(&rtc->lock);
rtc->alarm_time = alarm_unix_time;
rtc_writel(rtc, TOP, rtc->alarm_time);
- if (alrm->pending)
+ if (alrm->enabled)
rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
| RTC_BIT(CTRL_TOPEN));
else
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index d060a06..d7bb9ba 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -905,19 +905,7 @@
.resume = cmos_pnp_resume,
};
-static int __init cmos_init(void)
-{
- return pnp_register_driver(&cmos_pnp_driver);
-}
-module_init(cmos_init);
-
-static void __exit cmos_exit(void)
-{
- pnp_unregister_driver(&cmos_pnp_driver);
-}
-module_exit(cmos_exit);
-
-#else /* no PNP */
+#endif /* CONFIG_PNP */
/*----------------------------------------------------------------*/
@@ -958,20 +946,33 @@
static int __init cmos_init(void)
{
+#ifdef CONFIG_PNP
+ if (pnp_platform_devices)
+ return pnp_register_driver(&cmos_pnp_driver);
+ else
+ return platform_driver_probe(&cmos_platform_driver,
+ cmos_platform_probe);
+#else
return platform_driver_probe(&cmos_platform_driver,
cmos_platform_probe);
+#endif /* CONFIG_PNP */
}
module_init(cmos_init);
static void __exit cmos_exit(void)
{
+#ifdef CONFIG_PNP
+ if (pnp_platform_devices)
+ pnp_unregister_driver(&cmos_pnp_driver);
+ else
+ platform_driver_unregister(&cmos_platform_driver);
+#else
platform_driver_unregister(&cmos_platform_driver);
+#endif /* CONFIG_PNP */
}
module_exit(cmos_exit);
-#endif /* !PNP */
-
MODULE_AUTHOR("David Brownell");
MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs");
MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index fa2d2f8..640acd2 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -42,7 +42,7 @@
#define DS1374_REG_TCR 0x09 /* Trickle Charge */
static const struct i2c_device_id ds1374_id[] = {
- { "rtc-ds1374", 0 },
+ { "ds1374", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ds1374_id);
diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c
new file mode 100644
index 0000000..abfdfcb
--- /dev/null
+++ b/drivers/rtc/rtc-fm3130.c
@@ -0,0 +1,501 @@
+/*
+ * rtc-fm3130.c - RTC driver for Ramtron FM3130 I2C chip.
+ *
+ * Copyright (C) 2008 Sergey Lapin
+ * Based on ds1307 driver by James Chapman and David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+
+#define FM3130_RTC_CONTROL (0x0)
+#define FM3130_CAL_CONTROL (0x1)
+#define FM3130_RTC_SECONDS (0x2)
+#define FM3130_RTC_MINUTES (0x3)
+#define FM3130_RTC_HOURS (0x4)
+#define FM3130_RTC_DAY (0x5)
+#define FM3130_RTC_DATE (0x6)
+#define FM3130_RTC_MONTHS (0x7)
+#define FM3130_RTC_YEARS (0x8)
+
+#define FM3130_ALARM_SECONDS (0x9)
+#define FM3130_ALARM_MINUTES (0xa)
+#define FM3130_ALARM_HOURS (0xb)
+#define FM3130_ALARM_DATE (0xc)
+#define FM3130_ALARM_MONTHS (0xd)
+#define FM3130_ALARM_WP_CONTROL (0xe)
+
+#define FM3130_CAL_CONTROL_BIT_nOSCEN (1 << 7) /* Osciallator enabled */
+#define FM3130_RTC_CONTROL_BIT_LB (1 << 7) /* Low battery */
+#define FM3130_RTC_CONTROL_BIT_AF (1 << 6) /* Alarm flag */
+#define FM3130_RTC_CONTROL_BIT_CF (1 << 5) /* Century overflow */
+#define FM3130_RTC_CONTROL_BIT_POR (1 << 4) /* Power on reset */
+#define FM3130_RTC_CONTROL_BIT_AEN (1 << 3) /* Alarm enable */
+#define FM3130_RTC_CONTROL_BIT_CAL (1 << 2) /* Calibration mode */
+#define FM3130_RTC_CONTROL_BIT_WRITE (1 << 1) /* W=1 -> write mode W=0 normal */
+#define FM3130_RTC_CONTROL_BIT_READ (1 << 0) /* R=1 -> read mode R=0 normal */
+
+#define FM3130_CLOCK_REGS 7
+#define FM3130_ALARM_REGS 5
+
+struct fm3130 {
+ u8 reg_addr_time;
+ u8 reg_addr_alarm;
+ u8 regs[15];
+ struct i2c_msg msg[4];
+ struct i2c_client *client;
+ struct rtc_device *rtc;
+ int data_valid;
+ int alarm;
+};
+static const struct i2c_device_id fm3130_id[] = {
+ { "fm3130", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, fm3130_id);
+
+#define FM3130_MODE_NORMAL 0
+#define FM3130_MODE_WRITE 1
+#define FM3130_MODE_READ 2
+
+static void fm3130_rtc_mode(struct device *dev, int mode)
+{
+ struct fm3130 *fm3130 = dev_get_drvdata(dev);
+
+ fm3130->regs[FM3130_RTC_CONTROL] =
+ i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+ switch (mode) {
+ case FM3130_MODE_NORMAL:
+ fm3130->regs[FM3130_RTC_CONTROL] &=
+ ~(FM3130_RTC_CONTROL_BIT_WRITE |
+ FM3130_RTC_CONTROL_BIT_READ);
+ break;
+ case FM3130_MODE_WRITE:
+ fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_WRITE;
+ break;
+ case FM3130_MODE_READ:
+ fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_READ;
+ break;
+ default:
+ dev_dbg(dev, "invalid mode %d\n", mode);
+ break;
+ }
+ /* Checking for alarm */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
+ fm3130->alarm = 1;
+ fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
+ }
+ i2c_smbus_write_byte_data(fm3130->client,
+ FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]);
+}
+
+static int fm3130_get_time(struct device *dev, struct rtc_time *t)
+{
+ struct fm3130 *fm3130 = dev_get_drvdata(dev);
+ int tmp;
+
+ if (!fm3130->data_valid) {
+ /* We have invalid data in RTC, probably due
+ to battery faults or other problems. Return EIO
+ for now, it will allow us to set data later insted
+ of error during probing which disables device */
+ return -EIO;
+ }
+ fm3130_rtc_mode(dev, FM3130_MODE_READ);
+
+ /* read the RTC date and time registers all at once */
+ tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent),
+ fm3130->msg, 2);
+ if (tmp != 2) {
+ dev_err(dev, "%s error %d\n", "read", tmp);
+ return -EIO;
+ }
+
+ fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
+
+ dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x"
+ "%02x %02x %02x %02x %02x %02x %02x\n",
+ "read",
+ fm3130->regs[0], fm3130->regs[1],
+ fm3130->regs[2], fm3130->regs[3],
+ fm3130->regs[4], fm3130->regs[5],
+ fm3130->regs[6], fm3130->regs[7],
+ fm3130->regs[8], fm3130->regs[9],
+ fm3130->regs[0xa], fm3130->regs[0xb],
+ fm3130->regs[0xc], fm3130->regs[0xd],
+ fm3130->regs[0xe]);
+
+ t->tm_sec = BCD2BIN(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
+ t->tm_min = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
+ tmp = fm3130->regs[FM3130_RTC_HOURS] & 0x3f;
+ t->tm_hour = BCD2BIN(tmp);
+ t->tm_wday = BCD2BIN(fm3130->regs[FM3130_RTC_DAY] & 0x07) - 1;
+ t->tm_mday = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
+ tmp = fm3130->regs[FM3130_RTC_MONTHS] & 0x1f;
+ t->tm_mon = BCD2BIN(tmp) - 1;
+
+ /* assume 20YY not 19YY, and ignore CF bit */
+ t->tm_year = BCD2BIN(fm3130->regs[FM3130_RTC_YEARS]) + 100;
+
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "read", t->tm_sec, t->tm_min,
+ t->tm_hour, t->tm_mday,
+ t->tm_mon, t->tm_year, t->tm_wday);
+
+ /* initial clock setting can be undefined */
+ return rtc_valid_tm(t);
+}
+
+
+static int fm3130_set_time(struct device *dev, struct rtc_time *t)
+{
+ struct fm3130 *fm3130 = dev_get_drvdata(dev);
+ int tmp, i;
+ u8 *buf = fm3130->regs;
+
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "write", t->tm_sec, t->tm_min,
+ t->tm_hour, t->tm_mday,
+ t->tm_mon, t->tm_year, t->tm_wday);
+
+ /* first register addr */
+ buf[FM3130_RTC_SECONDS] = BIN2BCD(t->tm_sec);
+ buf[FM3130_RTC_MINUTES] = BIN2BCD(t->tm_min);
+ buf[FM3130_RTC_HOURS] = BIN2BCD(t->tm_hour);
+ buf[FM3130_RTC_DAY] = BIN2BCD(t->tm_wday + 1);
+ buf[FM3130_RTC_DATE] = BIN2BCD(t->tm_mday);
+ buf[FM3130_RTC_MONTHS] = BIN2BCD(t->tm_mon + 1);
+
+ /* assume 20YY not 19YY */
+ tmp = t->tm_year - 100;
+ buf[FM3130_RTC_YEARS] = BIN2BCD(tmp);
+
+ dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x"
+ "%02x %02x %02x %02x %02x %02x %02x %02x\n",
+ "write", buf[0], buf[1], buf[2], buf[3],
+ buf[4], buf[5], buf[6], buf[7],
+ buf[8], buf[9], buf[0xa], buf[0xb],
+ buf[0xc], buf[0xd], buf[0xe]);
+
+ fm3130_rtc_mode(dev, FM3130_MODE_WRITE);
+
+ /* Writing time registers, we don't support multibyte transfers */
+ for (i = 0; i < FM3130_CLOCK_REGS; i++) {
+ i2c_smbus_write_byte_data(fm3130->client,
+ FM3130_RTC_SECONDS + i,
+ fm3130->regs[FM3130_RTC_SECONDS + i]);
+ }
+
+ fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
+
+ /* We assume here that data are valid once written */
+ if (!fm3130->data_valid)
+ fm3130->data_valid = 1;
+ return 0;
+}
+
+static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct fm3130 *fm3130 = dev_get_drvdata(dev);
+ int tmp;
+ struct rtc_time *tm = &alrm->time;
+ /* read the RTC alarm registers all at once */
+ tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent),
+ &fm3130->msg[2], 2);
+ if (tmp != 2) {
+ dev_err(dev, "%s error %d\n", "read", tmp);
+ return -EIO;
+ }
+ dev_dbg(dev, "alarm read %02x %02x %02x %02x %02x\n",
+ fm3130->regs[FM3130_ALARM_SECONDS],
+ fm3130->regs[FM3130_ALARM_MINUTES],
+ fm3130->regs[FM3130_ALARM_HOURS],
+ fm3130->regs[FM3130_ALARM_DATE],
+ fm3130->regs[FM3130_ALARM_MONTHS]);
+
+
+ tm->tm_sec = BCD2BIN(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F);
+ tm->tm_min = BCD2BIN(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F);
+ tm->tm_hour = BCD2BIN(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F);
+ tm->tm_mday = BCD2BIN(fm3130->regs[FM3130_ALARM_DATE] & 0x3F);
+ tm->tm_mon = BCD2BIN(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F);
+ if (tm->tm_mon > 0)
+ tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "read alarm", tm->tm_sec, tm->tm_min,
+ tm->tm_hour, tm->tm_mday,
+ tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ return 0;
+}
+
+static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct fm3130 *fm3130 = dev_get_drvdata(dev);
+ struct rtc_time *tm = &alrm->time;
+ int i;
+
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "write alarm", tm->tm_sec, tm->tm_min,
+ tm->tm_hour, tm->tm_mday,
+ tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ if (tm->tm_sec != -1)
+ fm3130->regs[FM3130_ALARM_SECONDS] =
+ BIN2BCD(tm->tm_sec) | 0x80;
+
+ if (tm->tm_min != -1)
+ fm3130->regs[FM3130_ALARM_MINUTES] =
+ BIN2BCD(tm->tm_min) | 0x80;
+
+ if (tm->tm_hour != -1)
+ fm3130->regs[FM3130_ALARM_HOURS] =
+ BIN2BCD(tm->tm_hour) | 0x80;
+
+ if (tm->tm_mday != -1)
+ fm3130->regs[FM3130_ALARM_DATE] =
+ BIN2BCD(tm->tm_mday) | 0x80;
+
+ if (tm->tm_mon != -1)
+ fm3130->regs[FM3130_ALARM_MONTHS] =
+ BIN2BCD(tm->tm_mon + 1) | 0x80;
+
+ dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n",
+ fm3130->regs[FM3130_ALARM_SECONDS],
+ fm3130->regs[FM3130_ALARM_MINUTES],
+ fm3130->regs[FM3130_ALARM_HOURS],
+ fm3130->regs[FM3130_ALARM_DATE],
+ fm3130->regs[FM3130_ALARM_MONTHS]);
+ /* Writing time registers, we don't support multibyte transfers */
+ for (i = 0; i < FM3130_ALARM_REGS; i++) {
+ i2c_smbus_write_byte_data(fm3130->client,
+ FM3130_ALARM_SECONDS + i,
+ fm3130->regs[FM3130_ALARM_SECONDS + i]);
+ }
+ fm3130->regs[FM3130_RTC_CONTROL] =
+ i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+ /* Checking for alarm */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
+ fm3130->alarm = 1;
+ fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
+ }
+ if (alrm->enabled) {
+ i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
+ (fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_CAL)) |
+ FM3130_RTC_CONTROL_BIT_AEN);
+ } else {
+ i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
+ fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_AEN));
+ }
+ return 0;
+}
+
+static const struct rtc_class_ops fm3130_rtc_ops = {
+ .read_time = fm3130_get_time,
+ .set_time = fm3130_set_time,
+ .read_alarm = fm3130_read_alarm,
+ .set_alarm = fm3130_set_alarm,
+};
+
+static struct i2c_driver fm3130_driver;
+
+static int __devinit fm3130_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct fm3130 *fm3130;
+ int err = -ENODEV;
+ int tmp;
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+
+ if (!i2c_check_functionality(adapter,
+ I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+ return -EIO;
+
+ fm3130 = kzalloc(sizeof(struct fm3130), GFP_KERNEL);
+
+ if (!fm3130)
+ return -ENOMEM;
+
+ fm3130->client = client;
+ i2c_set_clientdata(client, fm3130);
+ fm3130->reg_addr_time = FM3130_RTC_SECONDS;
+ fm3130->reg_addr_alarm = FM3130_ALARM_SECONDS;
+
+ /* Messages to read time */
+ fm3130->msg[0].addr = client->addr;
+ fm3130->msg[0].flags = 0;
+ fm3130->msg[0].len = 1;
+ fm3130->msg[0].buf = &fm3130->reg_addr_time;
+
+ fm3130->msg[1].addr = client->addr;
+ fm3130->msg[1].flags = I2C_M_RD;
+ fm3130->msg[1].len = FM3130_CLOCK_REGS;
+ fm3130->msg[1].buf = &fm3130->regs[FM3130_RTC_SECONDS];
+
+ /* Messages to read alarm */
+ fm3130->msg[2].addr = client->addr;
+ fm3130->msg[2].flags = 0;
+ fm3130->msg[2].len = 1;
+ fm3130->msg[2].buf = &fm3130->reg_addr_alarm;
+
+ fm3130->msg[3].addr = client->addr;
+ fm3130->msg[3].flags = I2C_M_RD;
+ fm3130->msg[3].len = FM3130_ALARM_REGS;
+ fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS];
+
+ fm3130->data_valid = 0;
+
+ tmp = i2c_transfer(adapter, fm3130->msg, 4);
+ if (tmp != 4) {
+ pr_debug("read error %d\n", tmp);
+ err = -EIO;
+ goto exit_free;
+ }
+
+ fm3130->regs[FM3130_RTC_CONTROL] =
+ i2c_smbus_read_byte_data(client, FM3130_RTC_CONTROL);
+ fm3130->regs[FM3130_CAL_CONTROL] =
+ i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL);
+
+ /* Checking for alarm */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
+ fm3130->alarm = 1;
+ fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
+ }
+
+ /* Disabling calibration mode */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL)
+ i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+ fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_CAL));
+ dev_warn(&client->dev, "Disabling calibration mode!\n");
+
+ /* Disabling read and write modes */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE ||
+ fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ)
+ i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+ fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_READ |
+ FM3130_RTC_CONTROL_BIT_WRITE));
+ dev_warn(&client->dev, "Disabling READ or WRITE mode!\n");
+
+ /* oscillator off? turn it on, so clock can tick. */
+ if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN)
+ i2c_smbus_write_byte_data(client, FM3130_CAL_CONTROL,
+ fm3130->regs[FM3130_CAL_CONTROL] &
+ ~(FM3130_CAL_CONTROL_BIT_nOSCEN));
+
+ /* oscillator fault? clear flag, and warn */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB)
+ dev_warn(&client->dev, "Low battery!\n");
+
+ /* oscillator fault? clear flag, and warn */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) {
+ i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+ fm3130->regs[FM3130_RTC_CONTROL] &
+ ~FM3130_RTC_CONTROL_BIT_POR);
+ dev_warn(&client->dev, "SET TIME!\n");
+ }
+ /* ACS is controlled by alarm */
+ i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80);
+
+ /* TODO */
+ /* TODO need to sanity check alarm */
+ tmp = fm3130->regs[FM3130_RTC_SECONDS];
+ tmp = BCD2BIN(tmp & 0x7f);
+ if (tmp > 60)
+ goto exit_bad;
+ tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
+ if (tmp > 60)
+ goto exit_bad;
+
+ tmp = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
+ if (tmp == 0 || tmp > 31)
+ goto exit_bad;
+
+ tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
+ if (tmp == 0 || tmp > 12)
+ goto exit_bad;
+
+ tmp = fm3130->regs[FM3130_RTC_HOURS];
+
+ fm3130->data_valid = 1;
+
+exit_bad:
+ if (!fm3130->data_valid)
+ dev_dbg(&client->dev,
+ "%s: %02x %02x %02x %02x %02x %02x %02x %02x"
+ "%02x %02x %02x %02x %02x %02x %02x\n",
+ "bogus registers",
+ fm3130->regs[0], fm3130->regs[1],
+ fm3130->regs[2], fm3130->regs[3],
+ fm3130->regs[4], fm3130->regs[5],
+ fm3130->regs[6], fm3130->regs[7],
+ fm3130->regs[8], fm3130->regs[9],
+ fm3130->regs[0xa], fm3130->regs[0xb],
+ fm3130->regs[0xc], fm3130->regs[0xd],
+ fm3130->regs[0xe]);
+
+ /* We won't bail out here because we just got invalid data.
+ Time setting from u-boot doesn't work anyway */
+ fm3130->rtc = rtc_device_register(client->name, &client->dev,
+ &fm3130_rtc_ops, THIS_MODULE);
+ if (IS_ERR(fm3130->rtc)) {
+ err = PTR_ERR(fm3130->rtc);
+ dev_err(&client->dev,
+ "unable to register the class device\n");
+ goto exit_free;
+ }
+ return 0;
+exit_free:
+ kfree(fm3130);
+ return err;
+}
+
+static int __devexit fm3130_remove(struct i2c_client *client)
+{
+ struct fm3130 *fm3130 = i2c_get_clientdata(client);
+
+ rtc_device_unregister(fm3130->rtc);
+ kfree(fm3130);
+ return 0;
+}
+
+static struct i2c_driver fm3130_driver = {
+ .driver = {
+ .name = "rtc-fm3130",
+ .owner = THIS_MODULE,
+ },
+ .probe = fm3130_probe,
+ .remove = __devexit_p(fm3130_remove),
+ .id_table = fm3130_id,
+};
+
+static int __init fm3130_init(void)
+{
+ return i2c_add_driver(&fm3130_driver);
+}
+module_init(fm3130_init);
+
+static void __exit fm3130_exit(void)
+{
+ i2c_del_driver(&fm3130_driver);
+}
+module_exit(fm3130_exit);
+
+MODULE_DESCRIPTION("RTC driver for FM3130");
+MODULE_AUTHOR("Sergey Lapin <slapin@ossfans.org>");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c
index 0fc4c36..748a502 100644
--- a/drivers/rtc/rtc-pcf8563.c
+++ b/drivers/rtc/rtc-pcf8563.c
@@ -302,6 +302,7 @@
static const struct i2c_device_id pcf8563_id[] = {
{ "pcf8563", 0 },
+ { "rtc8564", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, pcf8563_id);
diff --git a/drivers/rtc/rtc-ppc.c b/drivers/rtc/rtc-ppc.c
new file mode 100644
index 0000000..c8e97e2
--- /dev/null
+++ b/drivers/rtc/rtc-ppc.c
@@ -0,0 +1,69 @@
+/*
+ * RTC driver for ppc_md RTC functions
+ *
+ * © 2007 Red Hat, Inc.
+ *
+ * Author: David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <asm/machdep.h>
+
+static int ppc_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ ppc_md.get_rtc_time(tm);
+ return 0;
+}
+
+static int ppc_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ return ppc_md.set_rtc_time(tm);
+}
+
+static const struct rtc_class_ops ppc_rtc_ops = {
+ .set_time = ppc_rtc_set_time,
+ .read_time = ppc_rtc_read_time,
+};
+
+static struct rtc_device *rtc;
+static struct platform_device *ppc_rtc_pdev;
+
+static int __init ppc_rtc_init(void)
+{
+ if (!ppc_md.get_rtc_time || !ppc_md.set_rtc_time)
+ return -ENODEV;
+
+ ppc_rtc_pdev = platform_device_register_simple("ppc-rtc", 0, NULL, 0);
+ if (IS_ERR(ppc_rtc_pdev))
+ return PTR_ERR(ppc_rtc_pdev);
+
+ rtc = rtc_device_register("ppc_md", &ppc_rtc_pdev->dev,
+ &ppc_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc)) {
+ platform_device_unregister(ppc_rtc_pdev);
+ return PTR_ERR(rtc);
+ }
+
+ return 0;
+}
+
+static void __exit ppc_rtc_exit(void)
+{
+ rtc_device_unregister(rtc);
+ platform_device_unregister(ppc_rtc_pdev);
+}
+
+module_init(ppc_rtc_init);
+module_exit(ppc_rtc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("Generic RTC class driver for PowerPC");
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 82f62d2..67421b0d 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -331,14 +331,14 @@
RCNR = 0;
}
+ device_init_wakeup(&pdev->dev, 1);
+
rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops,
THIS_MODULE);
if (IS_ERR(rtc))
return PTR_ERR(rtc);
- device_init_wakeup(&pdev->dev, 1);
-
platform_set_drvdata(pdev, rtc);
return 0;
diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c
index eaf5594..7dcfba1 100644
--- a/drivers/rtc/rtc-x1205.c
+++ b/drivers/rtc/rtc-x1205.c
@@ -71,6 +71,7 @@
#define X1205_SR_RTCF 0x01 /* Clock failure */
#define X1205_SR_WEL 0x02 /* Write Enable Latch */
#define X1205_SR_RWEL 0x04 /* Register Write Enable */
+#define X1205_SR_AL0 0x20 /* Alarm 0 match */
#define X1205_DTR_DTR0 0x01
#define X1205_DTR_DTR1 0x02
@@ -78,6 +79,8 @@
#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
+#define X1205_INT_AL0E 0x20 /* Alarm 0 enable */
+
static struct i2c_driver x1205_driver;
/*
@@ -89,8 +92,8 @@
unsigned char reg_base)
{
unsigned char dt_addr[2] = { 0, reg_base };
-
unsigned char buf[8];
+ int i;
struct i2c_msg msgs[] = {
{ client->addr, 0, 2, dt_addr }, /* setup read ptr */
@@ -98,7 +101,7 @@
};
/* read date registers */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
@@ -110,6 +113,11 @@
buf[0], buf[1], buf[2], buf[3],
buf[4], buf[5], buf[6], buf[7]);
+ /* Mask out the enable bits if these are alarm registers */
+ if (reg_base < X1205_CCR_BASE)
+ for (i = 0; i <= 4; i++)
+ buf[i] &= 0x7F;
+
tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
tm->tm_min = BCD2BIN(buf[CCR_MIN]);
tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
@@ -138,7 +146,7 @@
};
/* read status register */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
@@ -147,10 +155,11 @@
}
static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
- int datetoo, u8 reg_base)
+ int datetoo, u8 reg_base, unsigned char alm_enable)
{
- int i, xfer;
+ int i, xfer, nbytes;
unsigned char buf[8];
+ unsigned char rdata[10] = { 0, reg_base };
static const unsigned char wel[3] = { 0, X1205_REG_SR,
X1205_SR_WEL };
@@ -189,6 +198,11 @@
buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100);
}
+ /* If writing alarm registers, set compare bits on registers 0-4 */
+ if (reg_base < X1205_CCR_BASE)
+ for (i = 0; i <= 4; i++)
+ buf[i] |= 0x80;
+
/* this sequence is required to unlock the chip */
if ((xfer = i2c_master_send(client, wel, 3)) != 3) {
dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer);
@@ -200,19 +214,57 @@
return -EIO;
}
- /* write register's data */
- for (i = 0; i < (datetoo ? 8 : 3); i++) {
- unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
- xfer = i2c_master_send(client, rdata, 3);
+ /* write register's data */
+ if (datetoo)
+ nbytes = 8;
+ else
+ nbytes = 3;
+ for (i = 0; i < nbytes; i++)
+ rdata[2+i] = buf[i];
+
+ xfer = i2c_master_send(client, rdata, nbytes+2);
+ if (xfer != nbytes+2) {
+ dev_err(&client->dev,
+ "%s: result=%d addr=%02x, data=%02x\n",
+ __func__,
+ xfer, rdata[1], rdata[2]);
+ return -EIO;
+ }
+
+ /* If we wrote to the nonvolatile region, wait 10msec for write cycle*/
+ if (reg_base < X1205_CCR_BASE) {
+ unsigned char al0e[3] = { 0, X1205_REG_INT, 0 };
+
+ msleep(10);
+
+ /* ...and set or clear the AL0E bit in the INT register */
+
+ /* Need to set RWEL again as the write has cleared it */
+ xfer = i2c_master_send(client, rwel, 3);
if (xfer != 3) {
dev_err(&client->dev,
- "%s: xfer=%d addr=%02x, data=%02x\n",
+ "%s: aloe rwel - %d\n",
__func__,
- xfer, rdata[1], rdata[2]);
+ xfer);
return -EIO;
}
- };
+
+ if (alm_enable)
+ al0e[2] = X1205_INT_AL0E;
+
+ xfer = i2c_master_send(client, al0e, 3);
+ if (xfer != 3) {
+ dev_err(&client->dev,
+ "%s: al0e - %d\n",
+ __func__,
+ xfer);
+ return -EIO;
+ }
+
+ /* and wait 10msec again for this write to complete */
+ msleep(10);
+ }
/* disable further writes */
if ((xfer = i2c_master_send(client, diswe, 3)) != 3) {
@@ -230,9 +282,9 @@
tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
- if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0)
- dev_err(&client->dev,
- "unable to restart the oscillator\n");
+ err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE, 0);
+ if (err < 0)
+ dev_err(&client->dev, "unable to restart the oscillator\n");
return err;
}
@@ -248,7 +300,7 @@
};
/* read dtr register */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
@@ -280,7 +332,7 @@
};
/* read atr register */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
@@ -403,14 +455,33 @@
static int x1205_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
- return x1205_get_datetime(to_i2c_client(dev),
- &alrm->time, X1205_ALM0_BASE);
+ int err;
+ unsigned char intreg, status;
+ static unsigned char int_addr[2] = { 0, X1205_REG_INT };
+ struct i2c_client *client = to_i2c_client(dev);
+ struct i2c_msg msgs[] = {
+ { client->addr, 0, 2, int_addr }, /* setup read ptr */
+ { client->addr, I2C_M_RD, 1, &intreg }, /* read INT register */
+ };
+
+ /* read interrupt register and status register */
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
+ dev_err(&client->dev, "%s: read error\n", __func__);
+ return -EIO;
+ }
+ err = x1205_get_status(client, &status);
+ if (err == 0) {
+ alrm->pending = (status & X1205_SR_AL0) ? 1 : 0;
+ alrm->enabled = (intreg & X1205_INT_AL0E) ? 1 : 0;
+ err = x1205_get_datetime(client, &alrm->time, X1205_ALM0_BASE);
+ }
+ return err;
}
static int x1205_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
return x1205_set_datetime(to_i2c_client(dev),
- &alrm->time, 1, X1205_ALM0_BASE);
+ &alrm->time, 1, X1205_ALM0_BASE, alrm->enabled);
}
static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm)
@@ -422,7 +493,7 @@
static int x1205_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
return x1205_set_datetime(to_i2c_client(dev),
- tm, 1, X1205_CCR_BASE);
+ tm, 1, X1205_CCR_BASE, 0);
}
static int x1205_rtc_proc(struct device *dev, struct seq_file *seq)
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index 62576af..3e577f6 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -773,6 +773,7 @@
{
int rc;
+ INIT_LIST_HEAD(&sclp_vt220_register.list);
if (!CONSOLE_IS_SCLP)
return 0;
rc = __sclp_vt220_init();
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index 8246ef3..42ce791 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -1598,7 +1598,7 @@
rc = tape_3590_read_dev_chars(device, rdc_data);
if (rc) {
DBF_LH(3, "Read device characteristics failed!\n");
- goto fail_kmalloc;
+ goto fail_rdc_data;
}
rc = tape_std_assign(device);
if (rc)
diff --git a/drivers/s390/cio/blacklist.c b/drivers/s390/cio/blacklist.c
index a4a5f2e..0bfcbbe 100644
--- a/drivers/s390/cio/blacklist.c
+++ b/drivers/s390/cio/blacklist.c
@@ -97,8 +97,8 @@
return 0;
}
-static int parse_busid(char *str, int *cssid, int *ssid, int *devno,
- int msgtrigger)
+static int parse_busid(char *str, unsigned int *cssid, unsigned int *ssid,
+ unsigned int *devno, int msgtrigger)
{
char *str_work;
int val, rc, ret;
@@ -148,7 +148,7 @@
static int blacklist_parse_parameters(char *str, range_action action,
int msgtrigger)
{
- int from_cssid, to_cssid, from_ssid, to_ssid, from, to;
+ unsigned int from_cssid, to_cssid, from_ssid, to_ssid, from, to;
int rc, totalrc;
char *parm;
range_action ra;
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 82c6a2d..b32d7eb 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -576,12 +576,14 @@
err = -ENODEV;
goto out;
}
- if (cio_is_console(sch->schid))
+ if (cio_is_console(sch->schid)) {
sch->opm = 0xff;
- else
+ sch->isc = 1;
+ } else {
sch->opm = chp_get_sch_opm(sch);
+ sch->isc = 3;
+ }
sch->lpm = sch->schib.pmcw.pam & sch->opm;
- sch->isc = 3;
CIO_MSG_EVENT(6, "Detected device %04x on subchannel 0.%x.%04X "
"- PIM = %02X, PAM = %02X, POM = %02X\n",
@@ -704,9 +706,9 @@
if (!console_subchannel_in_use)
return;
- /* disable all but isc 7 (console device) */
+ /* disable all but isc 1 (console device) */
__ctl_store (save_cr6, 6, 6);
- cr6 = 0x01000000;
+ cr6 = 0x40000000;
__ctl_load (cr6, 6, 6);
do {
@@ -788,11 +790,11 @@
}
/*
- * enable console I/O-interrupt subclass 7
+ * enable console I/O-interrupt subclass 1
*/
- ctl_set_bit(6, 24);
- console_subchannel.isc = 7;
- console_subchannel.schib.pmcw.isc = 7;
+ ctl_set_bit(6, 30);
+ console_subchannel.isc = 1;
+ console_subchannel.schib.pmcw.isc = 1;
console_subchannel.schib.pmcw.intparm =
(u32)(addr_t)&console_subchannel;
ret = cio_modify(&console_subchannel);
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index 9f55ce6..5ab3434 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -31,11 +31,6 @@
*/
static void *kvm_devices;
-/*
- * Unique numbering for kvm devices.
- */
-static unsigned int dev_index;
-
struct kvm_device {
struct virtio_device vdev;
struct kvm_device_desc *desc;
@@ -250,26 +245,25 @@
* adds a new device and register it with virtio
* appropriate drivers are loaded by the device model
*/
-static void add_kvm_device(struct kvm_device_desc *d)
+static void add_kvm_device(struct kvm_device_desc *d, unsigned int offset)
{
struct kvm_device *kdev;
kdev = kzalloc(sizeof(*kdev), GFP_KERNEL);
if (!kdev) {
- printk(KERN_EMERG "Cannot allocate kvm dev %u\n",
- dev_index++);
+ printk(KERN_EMERG "Cannot allocate kvm dev %u type %u\n",
+ offset, d->type);
return;
}
kdev->vdev.dev.parent = &kvm_root;
- kdev->vdev.index = dev_index++;
kdev->vdev.id.device = d->type;
kdev->vdev.config = &kvm_vq_configspace_ops;
kdev->desc = d;
if (register_virtio_device(&kdev->vdev) != 0) {
- printk(KERN_ERR "Failed to register kvm device %u\n",
- kdev->vdev.index);
+ printk(KERN_ERR "Failed to register kvm device %u type %u\n",
+ offset, d->type);
kfree(kdev);
}
}
@@ -289,7 +283,7 @@
if (d->type == 0)
break;
- add_kvm_device(d);
+ add_kvm_device(d, i);
}
}
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 436bf1f..9a71dae 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -290,9 +290,6 @@
card->dev->features |= NETIF_F_TSO | NETIF_F_SG |
NETIF_F_HW_CSUM;
} else {
- PRINT_WARN("TSO not supported on %s. "
- "large_send set to 'no'.\n",
- card->dev->name);
card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG |
NETIF_F_HW_CSUM);
card->options.large_send = QETH_LARGE_SEND_NO;
@@ -1407,12 +1404,6 @@
}
}
-static inline __u16 qeth_raw_devno_from_bus_id(char *id)
-{
- id += (strlen(id) - 4);
- return (__u16) simple_strtoul(id, &id, 16);
-}
-
static int qeth_idx_activate_get_answer(struct qeth_channel *channel,
void (*idx_reply_cb)(struct qeth_channel *,
struct qeth_cmd_buffer *))
@@ -1439,7 +1430,7 @@
spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags);
if (rc) {
- PRINT_ERR("Error2 in activating channel rc=%d\n", rc);
+ QETH_DBF_MESSAGE(2, "Error2 in activating channel rc=%d\n", rc);
QETH_DBF_TEXT_(SETUP, 2, "2err%d", rc);
atomic_set(&channel->irq_pending, 0);
wake_up(&card->wait_q);
@@ -1468,6 +1459,7 @@
__u16 temp;
__u8 tmp;
int rc;
+ struct ccw_dev_id temp_devid;
card = CARD_FROM_CDEV(channel->ccwdev);
@@ -1494,8 +1486,8 @@
&card->token.issuer_rm_w, QETH_MPC_TOKEN_LENGTH);
memcpy(QETH_IDX_ACT_FUNC_LEVEL(iob->data),
&card->info.func_level, sizeof(__u16));
- temp = qeth_raw_devno_from_bus_id(CARD_DDEV_ID(card));
- memcpy(QETH_IDX_ACT_QDIO_DEV_CUA(iob->data), &temp, 2);
+ ccw_device_get_id(CARD_DDEV(card), &temp_devid);
+ memcpy(QETH_IDX_ACT_QDIO_DEV_CUA(iob->data), &temp_devid.devno, 2);
temp = (card->info.cula << 8) + card->info.unit_addr2;
memcpy(QETH_IDX_ACT_QDIO_DEV_REALADDR(iob->data), &temp, 2);
@@ -1508,7 +1500,8 @@
spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags);
if (rc) {
- PRINT_ERR("Error1 in activating channel. rc=%d\n", rc);
+ QETH_DBF_MESSAGE(2, "Error1 in activating channel. rc=%d\n",
+ rc);
QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc);
atomic_set(&channel->irq_pending, 0);
wake_up(&card->wait_q);
@@ -1658,7 +1651,6 @@
reply = qeth_alloc_reply(card);
if (!reply) {
- PRINT_WARN("Could not alloc qeth_reply!\n");
return -ENOMEM;
}
reply->callback = reply_cb;
@@ -2612,15 +2604,9 @@
if (newcount < count) {
/* we are in memory shortage so we switch back to
traditional skb allocation and drop packages */
- if (!atomic_read(&card->force_alloc_skb) &&
- net_ratelimit())
- PRINT_WARN("Switch to alloc skb\n");
atomic_set(&card->force_alloc_skb, 3);
count = newcount;
} else {
- if ((atomic_read(&card->force_alloc_skb) == 1) &&
- net_ratelimit())
- PRINT_WARN("Switch to sg\n");
atomic_add_unless(&card->force_alloc_skb, -1, 0);
}
@@ -3034,7 +3020,7 @@
elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE)
+ skb->len) >> PAGE_SHIFT);
if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) {
- PRINT_ERR("Invalid size of IP packet "
+ QETH_DBF_MESSAGE(2, "Invalid size of IP packet "
"(Number=%d / Length=%d). Discarded.\n",
(elements_needed+elems), skb->len);
return 0;
@@ -3247,8 +3233,6 @@
* free buffers) to handle eddp context */
if (qeth_eddp_check_buffers_for_context(queue, ctx)
< 0) {
- if (net_ratelimit())
- PRINT_WARN("eddp tx_dropped 1\n");
rc = -EBUSY;
goto out;
}
@@ -3260,7 +3244,6 @@
tmp = qeth_eddp_fill_buffer(queue, ctx,
queue->next_buf_to_fill);
if (tmp < 0) {
- PRINT_ERR("eddp tx_dropped 2\n");
rc = -EBUSY;
goto out;
}
@@ -3602,8 +3585,6 @@
if ((!qeth_adp_supported(card, IPA_SETADP_SET_SNMP_CONTROL)) &&
(!card->options.layer2)) {
- PRINT_WARN("SNMP Query MIBS not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
/* skip 4 bytes (data_len struct member) to get req_len */
@@ -3634,7 +3615,7 @@
rc = qeth_send_ipa_snmp_cmd(card, iob, QETH_SETADP_BASE_LEN + req_len,
qeth_snmp_command_cb, (void *)&qinfo);
if (rc)
- PRINT_WARN("SNMP command failed on %s: (0x%x)\n",
+ QETH_DBF_MESSAGE(2, "SNMP command failed on %s: (0x%x)\n",
QETH_CARD_IFNAME(card), rc);
else {
if (copy_to_user(udata, qinfo.udata, qinfo.udata_len))
@@ -3807,8 +3788,8 @@
if (mpno)
mpno = min(mpno - 1, QETH_MAX_PORTNO);
if (card->info.portno > mpno) {
- PRINT_ERR("Device %s does not offer port number %d \n.",
- CARD_BUS_ID(card), card->info.portno);
+ QETH_DBF_MESSAGE(2, "Device %s does not offer port number %d"
+ "\n.", CARD_BUS_ID(card), card->info.portno);
rc = -ENODEV;
goto out;
}
@@ -3985,8 +3966,6 @@
return skb;
no_mem:
if (net_ratelimit()) {
- PRINT_WARN("No memory for packet received on %s.\n",
- QETH_CARD_IFNAME(card));
QETH_DBF_TEXT(TRACE, 2, "noskbmem");
QETH_DBF_TEXT_(TRACE, 2, "%s", CARD_BUS_ID(card));
}
@@ -4004,15 +3983,17 @@
}
}
-void qeth_dbf_longtext(enum qeth_dbf_names dbf_nix, int level, char *text, ...)
+void qeth_dbf_longtext(enum qeth_dbf_names dbf_nix, int level, char *fmt, ...)
{
char dbf_txt_buf[32];
+ va_list args;
if (level > (qeth_dbf[dbf_nix].id)->level)
return;
- snprintf(dbf_txt_buf, sizeof(dbf_txt_buf), text);
+ va_start(args, fmt);
+ vsnprintf(dbf_txt_buf, sizeof(dbf_txt_buf), fmt, args);
+ va_end(args);
debug_text_event(qeth_dbf[dbf_nix].id, level, dbf_txt_buf);
-
}
EXPORT_SYMBOL_GPL(qeth_dbf_longtext);
diff --git a/drivers/s390/net/qeth_core_offl.c b/drivers/s390/net/qeth_core_offl.c
index 822df83..452874e 100644
--- a/drivers/s390/net/qeth_core_offl.c
+++ b/drivers/s390/net/qeth_core_offl.c
@@ -122,8 +122,8 @@
if (element == 0)
return -EBUSY;
else {
- PRINT_WARN("could only partially fill eddp "
- "buffer!\n");
+ QETH_DBF_MESSAGE(2, "could only partially fill"
+ "eddp buffer!\n");
goto out;
}
}
@@ -143,8 +143,6 @@
if (must_refcnt) {
must_refcnt = 0;
if (qeth_eddp_buf_ref_context(buf, ctx)) {
- PRINT_WARN("no memory to create eddp context "
- "reference\n");
goto out_check;
}
}
diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c
index 08a50f0..c26e842 100644
--- a/drivers/s390/net/qeth_core_sys.c
+++ b/drivers/s390/net/qeth_core_sys.c
@@ -129,7 +129,6 @@
portno = simple_strtoul(buf, &tmp, 16);
if (portno > QETH_MAX_PORTNO) {
- PRINT_WARN("portno 0x%X is out of range\n", portno);
return -EINVAL;
}
@@ -223,8 +222,6 @@
* if though we have to permit priority queueing
*/
if (card->qdio.no_out_queues == 1) {
- PRINT_WARN("Priority queueing disabled due "
- "to hardware limitations!\n");
card->qdio.do_prio_queueing = QETH_PRIOQ_DEFAULT;
return -EPERM;
}
@@ -250,7 +247,6 @@
card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING;
card->qdio.default_out_queue = QETH_DEFAULT_QUEUE;
} else {
- PRINT_WARN("Unknown queueing type '%s'\n", tmp);
return -EINVAL;
}
return count;
@@ -291,9 +287,6 @@
((cnt > QETH_IN_BUF_COUNT_MAX) ? QETH_IN_BUF_COUNT_MAX : cnt);
if (old_cnt != cnt) {
rc = qeth_realloc_buffer_pool(card, cnt);
- if (rc)
- PRINT_WARN("Error (%d) while setting "
- "buffer count.\n", rc);
}
return count;
}
@@ -355,7 +348,6 @@
card->perf_stats.initial_rx_packets = card->stats.rx_packets;
card->perf_stats.initial_tx_packets = card->stats.tx_packets;
} else {
- PRINT_WARN("performance_stats: write 0 or 1 to this file!\n");
return -EINVAL;
}
return count;
@@ -399,7 +391,6 @@
newdis = QETH_DISCIPLINE_LAYER2;
break;
default:
- PRINT_WARN("layer2: write 0 or 1 to this file!\n");
return -EINVAL;
}
@@ -463,7 +454,6 @@
} else if (!strcmp(tmp, "TSO")) {
type = QETH_LARGE_SEND_TSO;
} else {
- PRINT_WARN("large_send: invalid mode %s!\n", tmp);
return -EINVAL;
}
if (card->options.large_send == type)
@@ -503,8 +493,6 @@
if (i <= max_value) {
*value = i;
} else {
- PRINT_WARN("blkt total time: write values between"
- " 0 and %d to this file!\n", max_value);
return -EINVAL;
}
return count;
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 86ec50d..f682f7b 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -101,19 +101,16 @@
{
struct qeth_card *card;
struct net_device *ndev;
- unsigned char *readno;
- __u16 temp_dev_no, card_dev_no;
- char *endp;
+ __u16 temp_dev_no;
unsigned long flags;
+ struct ccw_dev_id read_devid;
ndev = NULL;
memcpy(&temp_dev_no, read_dev_no, 2);
read_lock_irqsave(&qeth_core_card_list.rwlock, flags);
list_for_each_entry(card, &qeth_core_card_list.list, list) {
- readno = CARD_RDEV_ID(card);
- readno += (strlen(readno) - 4);
- card_dev_no = simple_strtoul(readno, &endp, 16);
- if (card_dev_no == temp_dev_no) {
+ ccw_device_get_id(CARD_RDEV(card), &read_devid);
+ if (read_devid.devno == temp_dev_no) {
ndev = card->dev;
break;
}
@@ -134,14 +131,14 @@
mac = &cmd->data.setdelmac.mac[0];
/* MAC already registered, needed in couple/uncouple case */
if (cmd->hdr.return_code == 0x2005) {
- PRINT_WARN("Group MAC %02x:%02x:%02x:%02x:%02x:%02x " \
+ QETH_DBF_MESSAGE(2, "Group MAC %02x:%02x:%02x:%02x:%02x:%02x "
"already existing on %s \n",
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5],
QETH_CARD_IFNAME(card));
cmd->hdr.return_code = 0;
}
if (cmd->hdr.return_code)
- PRINT_ERR("Could not set group MAC " \
+ QETH_DBF_MESSAGE(2, "Could not set group MAC "
"%02x:%02x:%02x:%02x:%02x:%02x on %s: %x\n",
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5],
QETH_CARD_IFNAME(card), cmd->hdr.return_code);
@@ -166,7 +163,7 @@
cmd = (struct qeth_ipa_cmd *) data;
mac = &cmd->data.setdelmac.mac[0];
if (cmd->hdr.return_code)
- PRINT_ERR("Could not delete group MAC " \
+ QETH_DBF_MESSAGE(2, "Could not delete group MAC "
"%02x:%02x:%02x:%02x:%02x:%02x on %s: %x\n",
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5],
QETH_CARD_IFNAME(card), cmd->hdr.return_code);
@@ -186,10 +183,8 @@
mc = kmalloc(sizeof(struct qeth_mc_mac), GFP_ATOMIC);
- if (!mc) {
- PRINT_ERR("no mem vor mc mac address\n");
+ if (!mc)
return;
- }
memcpy(mc->mc_addr, mac, OSA_ADDR_LEN);
mc->mc_addrlen = OSA_ADDR_LEN;
@@ -280,7 +275,7 @@
QETH_DBF_TEXT(TRACE, 2, "L2sdvcb");
cmd = (struct qeth_ipa_cmd *) data;
if (cmd->hdr.return_code) {
- PRINT_ERR("Error in processing VLAN %i on %s: 0x%x. "
+ QETH_DBF_MESSAGE(2, "Error in processing VLAN %i on %s: 0x%x. "
"Continuing\n", cmd->data.setdelvlan.vlan_id,
QETH_CARD_IFNAME(card), cmd->hdr.return_code);
QETH_DBF_TEXT_(TRACE, 2, "L2VL%4x", cmd->hdr.command);
@@ -333,8 +328,6 @@
spin_lock_bh(&card->vlanlock);
list_add_tail(&id->list, &card->vid_list);
spin_unlock_bh(&card->vlanlock);
- } else {
- PRINT_ERR("no memory for vid\n");
}
}
@@ -550,16 +543,15 @@
rc = qeth_query_setadapterparms(card);
if (rc) {
- PRINT_WARN("could not query adapter parameters on device %s: "
- "x%x\n", CARD_BUS_ID(card), rc);
+ QETH_DBF_MESSAGE(2, "could not query adapter parameters on "
+ "device %s: x%x\n", CARD_BUS_ID(card), rc);
}
if (card->info.guestlan) {
rc = qeth_setadpparms_change_macaddr(card);
if (rc) {
- PRINT_WARN("couldn't get MAC address on "
- "device %s: x%x\n",
- CARD_BUS_ID(card), rc);
+ QETH_DBF_MESSAGE(2, "couldn't get MAC address on "
+ "device %s: x%x\n", CARD_BUS_ID(card), rc);
QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc);
return rc;
}
@@ -585,8 +577,6 @@
}
if (card->info.type == QETH_CARD_TYPE_OSN) {
- PRINT_WARN("Setting MAC address on %s is not supported.\n",
- dev->name);
QETH_DBF_TEXT(TRACE, 3, "setmcOSN");
return -EOPNOTSUPP;
}
@@ -666,7 +656,7 @@
ctx = qeth_eddp_create_context(card, new_skb, hdr,
skb->sk->sk_protocol);
if (ctx == NULL) {
- PRINT_WARN("could not create eddp context\n");
+ QETH_DBF_MESSAGE(2, "could not create eddp context\n");
goto tx_drop;
}
} else {
@@ -731,6 +721,7 @@
if ((new_skb != skb) && new_skb)
dev_kfree_skb_any(new_skb);
dev_kfree_skb_any(skb);
+ netif_wake_queue(dev);
return NETDEV_TX_OK;
}
@@ -1155,7 +1146,7 @@
(addr_t) iob, 0, 0);
spin_unlock_irqrestore(get_ccwdev_lock(card->write.ccwdev), flags);
if (rc) {
- PRINT_WARN("qeth_osn_send_control_data: "
+ QETH_DBF_MESSAGE(2, "qeth_osn_send_control_data: "
"ccw_device_start rc = %i\n", rc);
QETH_DBF_TEXT_(TRACE, 2, " err%d", rc);
qeth_release_buffer(iob->channel, iob);
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 94a8ead..999552c 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -311,7 +311,6 @@
addr = kzalloc(sizeof(struct qeth_ipaddr), GFP_ATOMIC);
if (addr == NULL) {
- PRINT_WARN("Not enough memory to add address\n");
return NULL;
}
addr->type = QETH_IP_TYPE_NORMAL;
@@ -649,15 +648,6 @@
}
}
out_inval:
- PRINT_WARN("Routing type '%s' not supported for interface %s.\n"
- "Router status set to 'no router'.\n",
- ((*type == PRIMARY_ROUTER)? "primary router" :
- (*type == SECONDARY_ROUTER)? "secondary router" :
- (*type == PRIMARY_CONNECTOR)? "primary connector" :
- (*type == SECONDARY_CONNECTOR)? "secondary connector" :
- (*type == MULTICAST_ROUTER)? "multicast router" :
- "unknown"),
- card->dev->name);
*type = NO_ROUTER;
}
@@ -674,9 +664,9 @@
QETH_PROT_IPV4);
if (rc) {
card->options.route4.type = NO_ROUTER;
- PRINT_WARN("Error (0x%04x) while setting routing type on %s. "
- "Type set to 'no router'.\n",
- rc, QETH_CARD_IFNAME(card));
+ QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type"
+ " on %s. Type set to 'no router'.\n", rc,
+ QETH_CARD_IFNAME(card));
}
return rc;
}
@@ -697,9 +687,9 @@
QETH_PROT_IPV6);
if (rc) {
card->options.route6.type = NO_ROUTER;
- PRINT_WARN("Error (0x%04x) while setting routing type on %s. "
- "Type set to 'no router'.\n",
- rc, QETH_CARD_IFNAME(card));
+ QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type"
+ " on %s. Type set to 'no router'.\n", rc,
+ QETH_CARD_IFNAME(card));
}
#endif
return rc;
@@ -737,7 +727,6 @@
if (!memcmp(ipatoe->addr, new->addr,
(ipatoe->proto == QETH_PROT_IPV4)? 4:16) &&
(ipatoe->mask_bits == new->mask_bits)) {
- PRINT_WARN("ipato entry already exists!\n");
rc = -EEXIST;
break;
}
@@ -802,7 +791,6 @@
rc = -EEXIST;
spin_unlock_irqrestore(&card->ip_lock, flags);
if (rc) {
- PRINT_WARN("Cannot add VIPA. Address already exists!\n");
return rc;
}
if (!qeth_l3_add_ip(card, ipaddr))
@@ -867,7 +855,6 @@
rc = -EEXIST;
spin_unlock_irqrestore(&card->ip_lock, flags);
if (rc) {
- PRINT_WARN("Cannot add RXIP. Address already exists!\n");
return rc;
}
if (!qeth_l3_add_ip(card, ipaddr))
@@ -1020,23 +1007,23 @@
IPA_SETADP_SET_BROADCAST_MODE,
card->options.broadcast_mode);
if (rc)
- PRINT_WARN("couldn't set broadcast mode on "
+ QETH_DBF_MESSAGE(2, "couldn't set broadcast mode on "
"device %s: x%x\n",
CARD_BUS_ID(card), rc);
rc = qeth_l3_send_setadp_mode(card,
IPA_SETADP_ALTER_MAC_ADDRESS,
card->options.macaddr_mode);
if (rc)
- PRINT_WARN("couldn't set macaddr mode on "
+ QETH_DBF_MESSAGE(2, "couldn't set macaddr mode on "
"device %s: x%x\n", CARD_BUS_ID(card), rc);
return rc;
}
if (card->options.broadcast_mode == QETH_TR_BROADCAST_LOCAL)
- PRINT_WARN("set adapter parameters not available "
+ QETH_DBF_MESSAGE(2, "set adapter parameters not available "
"to set broadcast mode, using ALLRINGS "
"on device %s:\n", CARD_BUS_ID(card));
if (card->options.macaddr_mode == QETH_TR_MACADDR_CANONICAL)
- PRINT_WARN("set adapter parameters not available "
+ QETH_DBF_MESSAGE(2, "set adapter parameters not available "
"to set macaddr mode, using NONCANONICAL "
"on device %s:\n", CARD_BUS_ID(card));
return 0;
@@ -2070,7 +2057,7 @@
card = netdev_priv(dev);
else if (rc == QETH_VLAN_CARD)
card = netdev_priv(vlan_dev_info(dev)->real_dev);
- if (card->options.layer2)
+ if (card && card->options.layer2)
card = NULL;
QETH_DBF_TEXT_(TRACE, 4, "%d", rc);
return card ;
@@ -2182,8 +2169,6 @@
if (card->info.guestlan)
return -EOPNOTSUPP;
if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) {
- PRINT_WARN("ARP processing not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
rc = qeth_l3_send_simple_setassparms(card, IPA_ARP_PROCESSING,
@@ -2191,8 +2176,8 @@
no_entries);
if (rc) {
tmp = rc;
- PRINT_WARN("Could not set number of ARP entries on %s: "
- "%s (0x%x/%d)\n", QETH_CARD_IFNAME(card),
+ QETH_DBF_MESSAGE(2, "Could not set number of ARP entries on "
+ "%s: %s (0x%x/%d)\n", QETH_CARD_IFNAME(card),
qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
}
return rc;
@@ -2260,9 +2245,6 @@
qdata->no_entries * uentry_size){
QETH_DBF_TEXT_(TRACE, 4, "qaer3%i", -ENOMEM);
cmd->hdr.return_code = -ENOMEM;
- PRINT_WARN("query ARP user space buffer is too small for "
- "the returned number of ARP entries. "
- "Aborting query!\n");
goto out_error;
}
QETH_DBF_TEXT_(TRACE, 4, "anore%i",
@@ -2324,8 +2306,6 @@
if (!qeth_is_supported(card,/*IPA_QUERY_ARP_ADDR_INFO*/
IPA_ARP_PROCESSING)) {
- PRINT_WARN("ARP processing not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
/* get size of userspace buffer and mask_bits -> 6 bytes */
@@ -2344,7 +2324,7 @@
qeth_l3_arp_query_cb, (void *)&qinfo);
if (rc) {
tmp = rc;
- PRINT_WARN("Error while querying ARP cache on %s: %s "
+ QETH_DBF_MESSAGE(2, "Error while querying ARP cache on %s: %s "
"(0x%x/%d)\n", QETH_CARD_IFNAME(card),
qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
if (copy_to_user(udata, qinfo.udata, 4))
@@ -2375,8 +2355,6 @@
if (card->info.guestlan)
return -EOPNOTSUPP;
if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) {
- PRINT_WARN("ARP processing not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
@@ -2391,10 +2369,9 @@
if (rc) {
tmp = rc;
qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf);
- PRINT_WARN("Could not add ARP entry for address %s on %s: "
- "%s (0x%x/%d)\n",
- buf, QETH_CARD_IFNAME(card),
- qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
+ QETH_DBF_MESSAGE(2, "Could not add ARP entry for address %s "
+ "on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card),
+ qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
}
return rc;
}
@@ -2417,8 +2394,6 @@
if (card->info.guestlan)
return -EOPNOTSUPP;
if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) {
- PRINT_WARN("ARP processing not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
memcpy(buf, entry, 12);
@@ -2433,10 +2408,9 @@
tmp = rc;
memset(buf, 0, 16);
qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf);
- PRINT_WARN("Could not delete ARP entry for address %s on %s: "
- "%s (0x%x/%d)\n",
- buf, QETH_CARD_IFNAME(card),
- qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
+ QETH_DBF_MESSAGE(2, "Could not delete ARP entry for address %s"
+ " on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card),
+ qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
}
return rc;
}
@@ -2456,16 +2430,14 @@
if (card->info.guestlan || (card->info.type == QETH_CARD_TYPE_IQD))
return -EOPNOTSUPP;
if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) {
- PRINT_WARN("ARP processing not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
rc = qeth_l3_send_simple_setassparms(card, IPA_ARP_PROCESSING,
IPA_CMD_ASS_ARP_FLUSH_CACHE, 0);
if (rc) {
tmp = rc;
- PRINT_WARN("Could not flush ARP cache on %s: %s (0x%x/%d)\n",
- QETH_CARD_IFNAME(card),
+ QETH_DBF_MESSAGE(2, "Could not flush ARP cache on %s: %s "
+ "(0x%x/%d)\n", QETH_CARD_IFNAME(card),
qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
}
return rc;
@@ -2724,7 +2696,7 @@
ctx = qeth_eddp_create_context(card, new_skb, hdr,
skb->sk->sk_protocol);
if (ctx == NULL) {
- PRINT_WARN("could not create eddp context\n");
+ QETH_DBF_MESSAGE(2, "could not create eddp context\n");
goto tx_drop;
}
} else {
@@ -2792,6 +2764,7 @@
if ((new_skb != skb) && new_skb)
dev_kfree_skb_any(new_skb);
dev_kfree_skb_any(skb);
+ netif_wake_queue(dev);
return NETDEV_TX_OK;
}
diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c
index 08f51fd..ac19937 100644
--- a/drivers/s390/net/qeth_l3_sys.c
+++ b/drivers/s390/net/qeth_l3_sys.c
@@ -85,7 +85,6 @@
} else if (!strcmp(tmp, "multicast_router")) {
route->type = MULTICAST_ROUTER;
} else {
- PRINT_WARN("Invalid routing type '%s'.\n", tmp);
return -EINVAL;
}
if (((card->state == CARD_STATE_SOFTSETUP) ||
@@ -137,9 +136,6 @@
return -EINVAL;
if (!qeth_is_supported(card, IPA_IPV6)) {
- PRINT_WARN("IPv6 not supported for interface %s.\n"
- "Routing status no changed.\n",
- QETH_CARD_IFNAME(card));
return -ENOTSUPP;
}
@@ -179,7 +175,6 @@
if ((i == 0) || (i == 1))
card->options.fake_broadcast = i;
else {
- PRINT_WARN("fake_broadcast: write 0 or 1 to this file!\n");
return -EINVAL;
}
return count;
@@ -220,7 +215,6 @@
if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) ||
(card->info.link_type == QETH_LINK_TYPE_LANE_TR))) {
- PRINT_WARN("Device is not a tokenring device!\n");
return -EINVAL;
}
@@ -233,8 +227,6 @@
card->options.broadcast_mode = QETH_TR_BROADCAST_ALLRINGS;
return count;
} else {
- PRINT_WARN("broadcast_mode: invalid mode %s!\n",
- tmp);
return -EINVAL;
}
return count;
@@ -275,7 +267,6 @@
if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) ||
(card->info.link_type == QETH_LINK_TYPE_LANE_TR))) {
- PRINT_WARN("Device is not a tokenring device!\n");
return -EINVAL;
}
@@ -285,7 +276,6 @@
QETH_TR_MACADDR_CANONICAL :
QETH_TR_MACADDR_NONCANONICAL;
else {
- PRINT_WARN("canonical_macaddr: write 0 or 1 to this file!\n");
return -EINVAL;
}
return count;
@@ -327,7 +317,6 @@
else if (!strcmp(tmp, "no_checksumming"))
card->options.checksum_type = NO_CHECKSUMMING;
else {
- PRINT_WARN("Unknown checksumming type '%s'\n", tmp);
return -EINVAL;
}
return count;
@@ -382,8 +371,6 @@
} else if (!strcmp(tmp, "0")) {
card->ipato.enabled = 0;
} else {
- PRINT_WARN("ipato_enable: write 0, 1 or 'toggle' to "
- "this file\n");
return -EINVAL;
}
return count;
@@ -422,8 +409,6 @@
} else if (!strcmp(tmp, "0")) {
card->ipato.invert4 = 0;
} else {
- PRINT_WARN("ipato_invert4: write 0, 1 or 'toggle' to "
- "this file\n");
return -EINVAL;
}
return count;
@@ -486,13 +471,10 @@
/* get address string */
end = strchr(start, '/');
if (!end || (end - start >= 40)) {
- PRINT_WARN("Invalid format for ipato_addx/delx. "
- "Use <ip addr>/<mask bits>\n");
return -EINVAL;
}
strncpy(buffer, start, end - start);
if (qeth_l3_string_to_ipaddr(buffer, proto, addr)) {
- PRINT_WARN("Invalid IP address format!\n");
return -EINVAL;
}
start = end + 1;
@@ -500,7 +482,6 @@
if (!strlen(start) ||
(tmp == start) ||
(*mask_bits > ((proto == QETH_PROT_IPV4) ? 32 : 128))) {
- PRINT_WARN("Invalid mask bits for ipato_addx/delx !\n");
return -EINVAL;
}
return 0;
@@ -520,7 +501,6 @@
ipatoe = kzalloc(sizeof(struct qeth_ipato_entry), GFP_KERNEL);
if (!ipatoe) {
- PRINT_WARN("No memory to allocate ipato entry\n");
return -ENOMEM;
}
ipatoe->proto = proto;
@@ -609,8 +589,6 @@
} else if (!strcmp(tmp, "0")) {
card->ipato.invert6 = 0;
} else {
- PRINT_WARN("ipato_invert6: write 0, 1 or 'toggle' to "
- "this file\n");
return -EINVAL;
}
return count;
@@ -724,7 +702,6 @@
u8 *addr)
{
if (qeth_l3_string_to_ipaddr(buf, proto, addr)) {
- PRINT_WARN("Invalid IP address format!\n");
return -EINVAL;
}
return 0;
@@ -891,7 +868,6 @@
u8 *addr)
{
if (qeth_l3_string_to_ipaddr(buf, proto, addr)) {
- PRINT_WARN("Invalid IP address format!\n");
return -EINVAL;
}
return 0;
diff --git a/drivers/s390/s390mach.c b/drivers/s390/s390mach.c
index 5080f34..5bfbe76 100644
--- a/drivers/s390/s390mach.c
+++ b/drivers/s390/s390mach.c
@@ -207,6 +207,7 @@
do_exit(SIGSEGV);
}
}
+EXPORT_SYMBOL_GPL(s390_handle_mcck);
/*
* returns 0 if all registers could be validated
diff --git a/drivers/scsi/dpt/dptsig.h b/drivers/scsi/dpt/dptsig.h
index 72c8992..a6644b3 100644
--- a/drivers/scsi/dpt/dptsig.h
+++ b/drivers/scsi/dpt/dptsig.h
@@ -85,7 +85,7 @@
/* ------------------------------------------------------------------ */
/* What type of processor the file is meant to run on. */
/* This will let us know whether to read sigWORDs as high/low or low/high. */
-#define PROC_INTEL 0x00 /* Intel 80x86 */
+#define PROC_INTEL 0x00 /* Intel 80x86/ia64 */
#define PROC_MOTOROLA 0x01 /* Motorola 68K */
#define PROC_MIPS4000 0x02 /* MIPS RISC 4000 */
#define PROC_ALPHA 0x03 /* DEC Alpha */
@@ -104,6 +104,7 @@
#define PROC_486 0x08 /* Intel 80486 */
#define PROC_PENTIUM 0x10 /* Intel 586 aka P5 aka Pentium */
#define PROC_SEXIUM 0x20 /* Intel 686 aka P6 aka Pentium Pro or MMX */
+#define PROC_IA64 0x40 /* Intel IA64 processor */
/* PROC_i960: */
#define PROC_960RX 0x01 /* Intel 80960RC/RD */
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index a0b6d41..59fbef0 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -2359,6 +2359,24 @@
}
EXPORT_SYMBOL(scsi_esp_unregister);
+static int esp_target_alloc(struct scsi_target *starget)
+{
+ struct esp *esp = shost_priv(dev_to_shost(&starget->dev));
+ struct esp_target_data *tp = &esp->target[starget->id];
+
+ tp->starget = starget;
+
+ return 0;
+}
+
+static void esp_target_destroy(struct scsi_target *starget)
+{
+ struct esp *esp = shost_priv(dev_to_shost(&starget->dev));
+ struct esp_target_data *tp = &esp->target[starget->id];
+
+ tp->starget = NULL;
+}
+
static int esp_slave_alloc(struct scsi_device *dev)
{
struct esp *esp = shost_priv(dev->host);
@@ -2370,8 +2388,6 @@
return -ENOMEM;
dev->hostdata = lp;
- tp->starget = dev->sdev_target;
-
spi_min_period(tp->starget) = esp->min_period;
spi_max_offset(tp->starget) = 15;
@@ -2608,6 +2624,8 @@
.name = "esp",
.info = esp_info,
.queuecommand = esp_queuecommand,
+ .target_alloc = esp_target_alloc,
+ .target_destroy = esp_target_destroy,
.slave_alloc = esp_slave_alloc,
.slave_configure = esp_slave_configure,
.slave_destroy = esp_slave_destroy,
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 3690360..c6457bf 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -456,6 +456,10 @@
*
* Return value:
* A pointer to located Scsi_Host or NULL.
+ *
+ * The caller must do a scsi_host_put() to drop the reference
+ * that scsi_host_get() took. The put_device() below dropped
+ * the reference from class_find_device().
**/
struct Scsi_Host *scsi_host_lookup(unsigned short hostnum)
{
@@ -463,9 +467,10 @@
struct Scsi_Host *shost = ERR_PTR(-ENXIO);
cdev = class_find_device(&shost_class, &hostnum, __scsi_host_match);
- if (cdev)
+ if (cdev) {
shost = scsi_host_get(class_to_shost(cdev));
-
+ put_device(cdev);
+ }
return shost;
}
EXPORT_SYMBOL(scsi_host_lookup);
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index ccfd8ac..5d23368 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1348,7 +1348,7 @@
del_timer(&evt_struct->timer);
- if (crq->status != VIOSRP_OK && evt_struct->cmnd)
+ if ((crq->status != VIOSRP_OK && crq->status != VIOSRP_OK2) && evt_struct->cmnd)
evt_struct->cmnd->result = DID_ERROR << 16;
if (evt_struct->done)
evt_struct->done(evt_struct);
diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
index 4c4aadb..2046045 100644
--- a/drivers/scsi/ibmvscsi/viosrp.h
+++ b/drivers/scsi/ibmvscsi/viosrp.h
@@ -65,7 +65,8 @@
VIOSRP_VIOLATES_MAX_XFER = 0x2,
VIOSRP_PARTNER_PANIC = 0x3,
VIOSRP_DEVICE_BUSY = 0x8,
- VIOSRP_ADAPTER_FAIL = 0x10
+ VIOSRP_ADAPTER_FAIL = 0x10,
+ VIOSRP_OK2 = 0x99,
};
struct viosrp_crq {
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 999e91e..e7a3a65 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -71,6 +71,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/libata.h>
+#include <linux/hdreg.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/processor.h>
@@ -4913,8 +4914,11 @@
struct ipr_resource_entry *res;
res = (struct ipr_resource_entry *)sdev->hostdata;
- if (res && ipr_is_gata(res))
+ if (res && ipr_is_gata(res)) {
+ if (cmd == HDIO_GET_IDENTITY)
+ return -ENOTTY;
return ata_scsi_ioctl(sdev, cmd, arg);
+ }
return -EINVAL;
}
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 2876908..8dd88fc 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -70,6 +70,9 @@
case 2:
qla2x00_alloc_fw_dump(ha);
break;
+ case 3:
+ qla2x00_system_error(ha);
+ break;
}
return (count);
}
@@ -886,9 +889,13 @@
static void
qla2x00_get_host_port_type(struct Scsi_Host *shost)
{
- scsi_qla_host_t *ha = to_qla_parent(shost_priv(shost));
+ scsi_qla_host_t *ha = shost_priv(shost);
uint32_t port_type = FC_PORTTYPE_UNKNOWN;
+ if (ha->parent) {
+ fc_host_port_type(shost) = FC_PORTTYPE_NPIV;
+ return;
+ }
switch (ha->current_topology) {
case ISP_CFG_NL:
port_type = FC_PORTTYPE_LPORT;
@@ -1172,10 +1179,10 @@
qla24xx_disable_vp(vha);
qla24xx_deallocate_vp_id(vha);
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
ha->cur_vport_count--;
clear_bit(vha->vp_idx, ha->vp_idx_map);
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
kfree(vha->node_name);
kfree(vha->port_name);
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 299eccf..8dd60001 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2457,7 +2457,7 @@
#define MBX_INTR_WAIT 2
#define MBX_UPDATE_FLASH_ACTIVE 3
- struct semaphore vport_sem; /* Virtual port synchronization */
+ struct mutex vport_lock; /* Virtual port synchronization */
struct completion mbx_cmd_comp; /* Serialize mbx access */
struct completion mbx_intr_comp; /* Used for completion notification */
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index f882706..9b4bebe 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -228,6 +228,9 @@
extern int qla24xx_lun_reset(struct fc_port *, unsigned int);
extern int
+qla2x00_system_error(scsi_qla_host_t *);
+
+extern int
qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t);
extern int
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index e9bae27..92fafbd 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -34,7 +34,11 @@
static inline void
qla2x00_poll(scsi_qla_host_t *ha)
{
+ unsigned long flags;
+
+ local_irq_save(flags);
ha->isp_ops->intr_handler(0, ha);
+ local_irq_restore(flags);
}
static __inline__ scsi_qla_host_t *
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 5d9a64a..ec63b79 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -272,8 +272,6 @@
uint32_t rscn_entry, host_pid;
uint8_t rscn_queue_index;
unsigned long flags;
- scsi_qla_host_t *vha;
- int i;
/* Setup to process RIO completion. */
handle_cnt = 0;
@@ -544,18 +542,10 @@
break;
case MBA_PORT_UPDATE: /* Port database update */
- if ((ha->flags.npiv_supported) && (ha->num_vhosts)) {
- for_each_mapped_vp_idx(ha, i) {
- list_for_each_entry(vha, &ha->vp_list,
- vp_list) {
- if ((mb[3] & 0xff)
- == vha->vp_idx) {
- ha = vha;
- break;
- }
- }
- }
- }
+ /* Only handle SCNs for our Vport index. */
+ if (ha->parent && ha->vp_idx != (mb[3] & 0xff))
+ break;
+
/*
* If PORT UPDATE is global (recieved LIP_OCCURED/LIP_RESET
* event etc. earlier indicating loop is down) then process
@@ -590,18 +580,12 @@
break;
case MBA_RSCN_UPDATE: /* State Change Registration */
- if ((ha->flags.npiv_supported) && (ha->num_vhosts)) {
- for_each_mapped_vp_idx(ha, i) {
- list_for_each_entry(vha, &ha->vp_list,
- vp_list) {
- if ((mb[3] & 0xff)
- == vha->vp_idx) {
- ha = vha;
- break;
- }
- }
- }
- }
+ /* Check if the Vport has issued a SCR */
+ if (ha->parent && test_bit(VP_SCR_NEEDED, &ha->vp_flags))
+ break;
+ /* Only handle SCNs for our Vport index. */
+ if (ha->parent && ha->vp_idx != (mb[3] & 0xff))
+ break;
DEBUG2(printk("scsi(%ld): Asynchronous RSCR UPDATE.\n",
ha->host_no));
@@ -1132,25 +1116,6 @@
break;
qla2x00_handle_sense(sp, sense_data, sense_len);
-
- /*
- * In case of a Underrun condition, set both the lscsi
- * status and the completion status to appropriate
- * values.
- */
- if (resid &&
- ((unsigned)(scsi_bufflen(cp) - resid) <
- cp->underflow)) {
- DEBUG2(qla_printk(KERN_INFO, ha,
- "scsi(%ld:%d:%d:%d): Mid-layer underflow "
- "detected (%x of %x bytes)...returning "
- "error status.\n", ha->host_no,
- cp->device->channel, cp->device->id,
- cp->device->lun, resid,
- scsi_bufflen(cp)));
-
- cp->result = DID_ERROR << 16 | lscsi_status;
- }
} else {
/*
* If RISC reports underrun and target does not report
@@ -1639,12 +1604,12 @@
ha = dev_id;
reg = &ha->iobase->isp24;
- spin_lock(&ha->hardware_lock);
+ spin_lock_irq(&ha->hardware_lock);
qla24xx_process_response_queue(ha);
WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT);
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irq(&ha->hardware_lock);
return IRQ_HANDLED;
}
@@ -1663,7 +1628,7 @@
reg = &ha->iobase->isp24;
status = 0;
- spin_lock(&ha->hardware_lock);
+ spin_lock_irq(&ha->hardware_lock);
do {
stat = RD_REG_DWORD(®->host_status);
if (stat & HSRX_RISC_PAUSED) {
@@ -1716,7 +1681,7 @@
}
WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT);
} while (0);
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irq(&ha->hardware_lock);
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 2100604..250d2f6 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2303,8 +2303,6 @@
return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l);
}
-#if 0
-
int
qla2x00_system_error(scsi_qla_host_t *ha)
{
@@ -2312,7 +2310,7 @@
mbx_cmd_t mc;
mbx_cmd_t *mcp = &mc;
- if (!IS_FWI2_CAPABLE(ha))
+ if (!IS_QLA23XX(ha) && !IS_FWI2_CAPABLE(ha))
return QLA_FUNCTION_FAILED;
DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
@@ -2334,8 +2332,6 @@
return rval;
}
-#endif /* 0 */
-
/**
* qla2x00_set_serdes_params() -
* @ha: HA context
@@ -2508,7 +2504,7 @@
if (mb)
memcpy(mb, mcp->mb, 8 * sizeof(*mb));
if (dwords)
- *dwords = mcp->mb[6];
+ *dwords = buffers;
}
return rval;
@@ -2807,9 +2803,9 @@
*/
map = (vp_index - 1) / 8;
pos = (vp_index - 1) & 7;
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
vce->vp_idx_map[map] |= 1 << pos;
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
rval = qla2x00_issue_iocb(ha, vce, vce_dma, 0);
if (rval != QLA_SUCCESS) {
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index f2b0497..62a3ad6 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -32,12 +32,12 @@
scsi_qla_host_t *ha = vha->parent;
/* Find an empty slot and assign an vp_id */
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
vp_id = find_first_zero_bit(ha->vp_idx_map, ha->max_npiv_vports + 1);
if (vp_id > ha->max_npiv_vports) {
DEBUG15(printk ("vp_id %d is bigger than max-supported %d.\n",
vp_id, ha->max_npiv_vports));
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
return vp_id;
}
@@ -45,7 +45,7 @@
ha->num_vhosts++;
vha->vp_idx = vp_id;
list_add_tail(&vha->vp_list, &ha->vp_list);
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
return vp_id;
}
@@ -55,12 +55,12 @@
uint16_t vp_id;
scsi_qla_host_t *ha = vha->parent;
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
vp_id = vha->vp_idx;
ha->num_vhosts--;
clear_bit(vp_id, ha->vp_idx_map);
list_del(&vha->vp_list);
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
}
static scsi_qla_host_t *
@@ -145,9 +145,9 @@
}
/* Initialize the new vport unless it is a persistent port */
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
ret = qla24xx_modify_vp_config(vha);
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
if (ret != QLA_SUCCESS) {
fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
@@ -406,6 +406,7 @@
INIT_LIST_HEAD(&vha->list);
INIT_LIST_HEAD(&vha->fcports);
INIT_LIST_HEAD(&vha->vp_fcports);
+ INIT_LIST_HEAD(&vha->work_list);
vha->dpc_flags = 0L;
set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
@@ -437,10 +438,10 @@
vha->flags.init_done = 1;
num_hosts++;
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
set_bit(vha->vp_idx, ha->vp_idx_map);
ha->cur_vport_count++;
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
return vha;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 3223fd1..48eaa3b 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -10,6 +10,7 @@
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/kthread.h>
+#include <linux/mutex.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
@@ -1631,7 +1632,7 @@
/* load the F/W, read paramaters, and init the H/W */
ha->instance = num_hosts;
- init_MUTEX(&ha->vport_sem);
+ mutex_init(&ha->vport_lock);
init_completion(&ha->mbx_cmd_comp);
complete(&ha->mbx_cmd_comp);
init_completion(&ha->mbx_intr_comp);
@@ -2156,13 +2157,14 @@
qla2x00_post_work(struct scsi_qla_host *ha, struct qla_work_evt *e, int locked)
{
unsigned long flags;
+ scsi_qla_host_t *pha = to_qla_parent(ha);
if (!locked)
- spin_lock_irqsave(&ha->hardware_lock, flags);
+ spin_lock_irqsave(&pha->hardware_lock, flags);
list_add_tail(&e->list, &ha->work_list);
qla2xxx_wake_dpc(ha);
if (!locked)
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ spin_unlock_irqrestore(&pha->hardware_lock, flags);
return QLA_SUCCESS;
}
@@ -2202,12 +2204,13 @@
qla2x00_do_work(struct scsi_qla_host *ha)
{
struct qla_work_evt *e;
+ scsi_qla_host_t *pha = to_qla_parent(ha);
- spin_lock_irq(&ha->hardware_lock);
+ spin_lock_irq(&pha->hardware_lock);
while (!list_empty(&ha->work_list)) {
e = list_entry(ha->work_list.next, struct qla_work_evt, list);
list_del_init(&e->list);
- spin_unlock_irq(&ha->hardware_lock);
+ spin_unlock_irq(&pha->hardware_lock);
switch (e->type) {
case QLA_EVT_AEN:
@@ -2221,9 +2224,9 @@
}
if (e->flags & QLA_EVT_FLAG_FREE)
kfree(e);
- spin_lock_irq(&ha->hardware_lock);
+ spin_lock_irq(&pha->hardware_lock);
}
- spin_unlock_irq(&ha->hardware_lock);
+ spin_unlock_irq(&pha->hardware_lock);
}
/**************************************************************************
@@ -2634,7 +2637,7 @@
#define FW_FILE_ISP24XX "ql2400_fw.bin"
#define FW_FILE_ISP25XX "ql2500_fw.bin"
-static DECLARE_MUTEX(qla_fw_lock);
+static DEFINE_MUTEX(qla_fw_lock);
static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
{ .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, },
@@ -2665,7 +2668,7 @@
blob = &qla_fw_blobs[FW_ISP25XX];
}
- down(&qla_fw_lock);
+ mutex_lock(&qla_fw_lock);
if (blob->fw)
goto out;
@@ -2678,7 +2681,7 @@
}
out:
- up(&qla_fw_lock);
+ mutex_unlock(&qla_fw_lock);
return blob;
}
@@ -2687,11 +2690,11 @@
{
int idx;
- down(&qla_fw_lock);
+ mutex_lock(&qla_fw_lock);
for (idx = 0; idx < FW_BLOBS; idx++)
if (qla_fw_blobs[idx].fw)
release_firmware(qla_fw_blobs[idx].fw);
- up(&qla_fw_lock);
+ mutex_unlock(&qla_fw_lock);
}
static pci_ers_result_t
@@ -2864,7 +2867,8 @@
return -ENODEV;
}
- printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
+ printk(KERN_INFO "QLogic Fibre Channel HBA Driver: %s\n",
+ qla2x00_version_str);
ret = pci_register_driver(&qla2xxx_pci_driver);
if (ret) {
kmem_cache_destroy(srb_cachep);
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index afeae2b..d058c88 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.02.01-k2"
+#define QLA2XXX_VERSION "8.02.01-k4"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 2
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index a82d2fe..cbf55d5 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -207,6 +207,15 @@
*/
blk_execute_rq(req->q, NULL, req, 1);
+ /*
+ * Some devices (USB mass-storage in particular) may transfer
+ * garbage data together with a residue indicating that the data
+ * is invalid. Prevent the garbage from being misinterpreted
+ * and prevent security leaks by zeroing out the excess data.
+ */
+ if (unlikely(req->data_len > 0 && req->data_len <= bufflen))
+ memset(buffer + (bufflen - req->data_len), 0, req->data_len);
+
ret = req->errors;
out:
blk_put_request(req);
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 049103f..93d2b67 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -359,7 +359,12 @@
static int scsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
{
- struct scsi_device *sdev = to_scsi_device(dev);
+ struct scsi_device *sdev;
+
+ if (dev->type != &scsi_dev_type)
+ return 0;
+
+ sdev = to_scsi_device(dev);
add_uevent_var(env, "MODALIAS=" SCSI_DEVICE_MODALIAS_FMT, sdev->type);
return 0;
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 45df83b..0fe031f 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -61,7 +61,7 @@
return err;
}
-#define SES_TIMEOUT 30
+#define SES_TIMEOUT (30 * HZ)
#define SES_RETRIES 3
static int ses_recv_diag(struct scsi_device *sdev, int page_code,
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index ea0edd1..fe694f0 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -182,8 +182,9 @@
int tablesize);
static ssize_t sg_new_read(Sg_fd * sfp, char __user *buf, size_t count,
Sg_request * srp);
-static ssize_t sg_new_write(Sg_fd * sfp, const char __user *buf, size_t count,
- int blocking, int read_only, Sg_request ** o_srp);
+static ssize_t sg_new_write(Sg_fd *sfp, struct file *file,
+ const char __user *buf, size_t count, int blocking,
+ int read_only, Sg_request **o_srp);
static int sg_common_write(Sg_fd * sfp, Sg_request * srp,
unsigned char *cmnd, int timeout, int blocking);
static int sg_u_iovec(sg_io_hdr_t * hp, int sg_num, int ind,
@@ -204,7 +205,6 @@
static Sg_request *sg_add_request(Sg_fd * sfp);
static int sg_remove_request(Sg_fd * sfp, Sg_request * srp);
static int sg_res_in_use(Sg_fd * sfp);
-static int sg_allow_access(unsigned char opcode, char dev_type);
static int sg_build_direct(Sg_request * srp, Sg_fd * sfp, int dxfer_len);
static Sg_device *sg_get_dev(int dev);
#ifdef CONFIG_SCSI_PROC_FS
@@ -544,7 +544,7 @@
return -EFAULT;
blocking = !(filp->f_flags & O_NONBLOCK);
if (old_hdr.reply_len < 0)
- return sg_new_write(sfp, buf, count, blocking, 0, NULL);
+ return sg_new_write(sfp, filp, buf, count, blocking, 0, NULL);
if (count < (SZ_SG_HEADER + 6))
return -EIO; /* The minimum scsi command length is 6 bytes. */
@@ -621,8 +621,9 @@
}
static ssize_t
-sg_new_write(Sg_fd * sfp, const char __user *buf, size_t count,
- int blocking, int read_only, Sg_request ** o_srp)
+sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf,
+ size_t count, int blocking, int read_only,
+ Sg_request **o_srp)
{
int k;
Sg_request *srp;
@@ -678,8 +679,7 @@
sg_remove_request(sfp, srp);
return -EFAULT;
}
- if (read_only &&
- (!sg_allow_access(cmnd[0], sfp->parentdp->device->type))) {
+ if (read_only && !blk_verify_command(file, cmnd)) {
sg_remove_request(sfp, srp);
return -EPERM;
}
@@ -799,7 +799,7 @@
if (!access_ok(VERIFY_WRITE, p, SZ_SG_IO_HDR))
return -EFAULT;
result =
- sg_new_write(sfp, p, SZ_SG_IO_HDR,
+ sg_new_write(sfp, filp, p, SZ_SG_IO_HDR,
blocking, read_only, &srp);
if (result < 0)
return result;
@@ -1048,7 +1048,7 @@
if (copy_from_user(&opcode, siocp->data, 1))
return -EFAULT;
- if (!sg_allow_access(opcode, sdp->device->type))
+ if (!blk_verify_command(filp, &opcode))
return -EPERM;
}
return sg_scsi_ioctl(filp, sdp->device->request_queue, NULL, p);
@@ -2502,30 +2502,6 @@
__free_pages(page, order);
}
-#ifndef MAINTENANCE_IN_CMD
-#define MAINTENANCE_IN_CMD 0xa3
-#endif
-
-static unsigned char allow_ops[] = { TEST_UNIT_READY, REQUEST_SENSE,
- INQUIRY, READ_CAPACITY, READ_BUFFER, READ_6, READ_10, READ_12,
- READ_16, MODE_SENSE, MODE_SENSE_10, LOG_SENSE, REPORT_LUNS,
- SERVICE_ACTION_IN, RECEIVE_DIAGNOSTIC, READ_LONG, MAINTENANCE_IN_CMD
-};
-
-static int
-sg_allow_access(unsigned char opcode, char dev_type)
-{
- int k;
-
- if (TYPE_SCANNER == dev_type) /* TYPE_ROM maybe burner */
- return 1;
- for (k = 0; k < sizeof (allow_ops); ++k) {
- if (opcode == allow_ops[k])
- return 1;
- }
- return 0;
-}
-
#ifdef CONFIG_SCSI_PROC_FS
static int
sg_idr_max_id(int id, void *p, void *data)
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 7ee86d4a7..27f5bfd 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -178,6 +178,9 @@
the_result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL,
0, sshdr, SR_TIMEOUT,
retries--);
+ if (scsi_sense_valid(sshdr) &&
+ sshdr->sense_key == UNIT_ATTENTION)
+ sdev->changed = 1;
} while (retries > 0 &&
(!scsi_status_is_good(the_result) ||
@@ -670,24 +673,20 @@
static void get_sectorsize(struct scsi_cd *cd)
{
unsigned char cmd[10];
- unsigned char *buffer;
+ unsigned char buffer[8];
int the_result, retries = 3;
int sector_size;
struct request_queue *queue;
- buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
- if (!buffer)
- goto Enomem;
-
do {
cmd[0] = READ_CAPACITY;
memset((void *) &cmd[1], 0, 9);
- memset(buffer, 0, 8);
+ memset(buffer, 0, sizeof(buffer));
/* Do the command and wait.. */
the_result = scsi_execute_req(cd->device, cmd, DMA_FROM_DEVICE,
- buffer, 8, NULL, SR_TIMEOUT,
- MAX_RETRIES);
+ buffer, sizeof(buffer), NULL,
+ SR_TIMEOUT, MAX_RETRIES);
retries--;
@@ -742,14 +741,8 @@
queue = cd->device->request_queue;
blk_queue_hardsect_size(queue, sector_size);
-out:
- kfree(buffer);
- return;
-Enomem:
- cd->capacity = 0x1fffff;
- cd->device->sector_size = 2048; /* A guess, just in case */
- goto out;
+ return;
}
static void get_capabilities(struct scsi_cd *cd)
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 1400ea6..be95e55 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -43,7 +43,6 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/serial.h>
#include "8250.h"
@@ -93,6 +92,7 @@
*/
#define CONFIG_HUB6 1
+#include <asm/serial.h>
/*
* SERIAL_PORT_DFNS tells us about built-in ports that have no
* standard enumeration mechanism. Platforms that can find all
@@ -1547,8 +1547,6 @@
i->head = &up->list;
spin_unlock_irq(&i->lock);
- irq_flags |= SERIAL_EXTRA_IRQ_FLAGS;
-
ret = request_irq(up->port.irq, serial8250_interrupt,
irq_flags, "serial", i);
if (ret < 0)
@@ -2625,6 +2623,9 @@
static int __init serial8250_console_init(void)
{
+ if (nr_uarts > UART_NR)
+ nr_uarts = UART_NR;
+
serial8250_isa_init_ports();
register_console(&serial8250_console);
return 0;
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index a10a40c..91bd28f 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -78,8 +78,3 @@
#else
#define ALPHA_KLUDGE_MCR 0
#endif
-
-#ifndef SERIAL_EXTRA_IRQ_FLAGS
-#define SERIAL_EXTRA_IRQ_FLAGS 0
-#endif
-
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index c065a70..42be8b01 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1318,7 +1318,7 @@
* If the baud rate generator isn't running, the port wasn't
* initialized by the boot loader.
*/
- quot = UART_GET_BRGR(port);
+ quot = UART_GET_BRGR(port) & ATMEL_US_CD;
if (!quot)
return;
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index d6b4ead..fd9bb77 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -49,6 +49,7 @@
#define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT)
#define DMA_RX_FLUSH_JIFFIES (HZ / 50)
+#define CTS_CHECK_JIFFIES (HZ / 50)
#ifdef CONFIG_SERIAL_BFIN_DMA
static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart);
@@ -290,11 +291,6 @@
{
struct circ_buf *xmit = &uart->port.info->xmit;
- if (uart->port.x_char) {
- UART_PUT_CHAR(uart, uart->port.x_char);
- uart->port.icount.tx++;
- uart->port.x_char = 0;
- }
/*
* Check the modem control lines before
* transmitting anything.
@@ -306,6 +302,12 @@
return;
}
+ if (uart->port.x_char) {
+ UART_PUT_CHAR(uart, uart->port.x_char);
+ uart->port.icount.tx++;
+ uart->port.x_char = 0;
+ }
+
while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) {
UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -345,15 +347,6 @@
}
#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-static void bfin_serial_do_work(struct work_struct *work)
-{
- struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue);
-
- bfin_serial_mctrl_check(uart);
-}
-#endif
-
#ifdef CONFIG_SERIAL_BFIN_DMA
static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
{
@@ -361,6 +354,12 @@
uart->tx_done = 0;
+ /*
+ * Check the modem control lines before
+ * transmitting anything.
+ */
+ bfin_serial_mctrl_check(uart);
+
if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
uart->tx_count = 0;
uart->tx_done = 1;
@@ -373,12 +372,6 @@
uart->port.x_char = 0;
}
- /*
- * Check the modem control lines before
- * transmitting anything.
- */
- bfin_serial_mctrl_check(uart);
-
uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE);
if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail))
uart->tx_count = UART_XMIT_SIZE - xmit->tail;
@@ -530,11 +523,7 @@
if (uart->cts_pin < 0)
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-# ifdef BF54x
- if (UART_GET_MSR(uart) & CTS)
-# else
- if (gpio_get_value(uart->cts_pin))
-# endif
+ if (UART_GET_CTS(uart))
return TIOCM_DSR | TIOCM_CAR;
else
#endif
@@ -549,17 +538,9 @@
return;
if (mctrl & TIOCM_RTS)
-# ifdef BF54x
- UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS);
-# else
- gpio_set_value(uart->rts_pin, 0);
-# endif
+ UART_CLEAR_RTS(uart);
else
-# ifdef BF54x
- UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS);
-# else
- gpio_set_value(uart->rts_pin, 1);
-# endif
+ UART_SET_RTS(uart);
#endif
}
@@ -577,7 +558,10 @@
uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
if (!(status & TIOCM_CTS)) {
tty->hw_stopped = 1;
- schedule_work(&uart->cts_workqueue);
+ uart->cts_timer.data = (unsigned long)(uart);
+ uart->cts_timer.function = (void *)bfin_serial_mctrl_check;
+ uart->cts_timer.expires = jiffies + CTS_CHECK_JIFFIES;
+ add_timer(&(uart->cts_timer));
} else {
tty->hw_stopped = 0;
}
@@ -752,11 +736,7 @@
/* Disable UART */
ier = UART_GET_IER(uart);
-#ifdef CONFIG_BF54x
- UART_CLEAR_IER(uart, 0xF);
-#else
- UART_PUT_IER(uart, 0);
-#endif
+ UART_DISABLE_INTS(uart);
/* Set DLAB in LCR to Access DLL and DLH */
UART_SET_DLAB(uart);
@@ -771,11 +751,7 @@
UART_PUT_LCR(uart, lcr);
/* Enable UART */
-#ifdef CONFIG_BF54x
- UART_SET_IER(uart, ier);
-#else
- UART_PUT_IER(uart, ier);
-#endif
+ UART_ENABLE_INTS(uart, ier);
val = UART_GET_GCTL(uart);
val |= UCEN;
@@ -833,15 +809,15 @@
* Enable the IrDA function if tty->ldisc.num is N_IRDA.
* In other cases, disable IrDA function.
*/
-static void bfin_set_ldisc(struct tty_struct *tty)
+static void bfin_serial_set_ldisc(struct uart_port *port)
{
- int line = tty->index;
+ int line = port->line;
unsigned short val;
- if (line >= tty->driver->num)
+ if (line >= port->info->tty->driver->num)
return;
- switch (tty->ldisc.num) {
+ switch (port->info->tty->ldisc.num) {
case N_IRDA:
val = UART_GET_GCTL(&bfin_serial_ports[line]);
val |= (IREN | RPOLC);
@@ -866,6 +842,7 @@
.startup = bfin_serial_startup,
.shutdown = bfin_serial_shutdown,
.set_termios = bfin_serial_set_termios,
+ .set_ldisc = bfin_serial_set_ldisc,
.type = bfin_serial_type,
.release_port = bfin_serial_release_port,
.request_port = bfin_serial_request_port,
@@ -904,7 +881,7 @@
init_timer(&(bfin_serial_ports[i].rx_dma_timer));
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work);
+ init_timer(&(bfin_serial_ports[i].cts_timer));
bfin_serial_ports[i].cts_pin =
bfin_serial_resource[i].uart_cts_pin;
bfin_serial_ports[i].rts_pin =
@@ -1206,7 +1183,6 @@
ret = uart_register_driver(&bfin_serial_reg);
if (ret == 0) {
- bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc;
ret = platform_driver_register(&bfin_serial_driver);
if (ret) {
pr_debug("uart register failed\n");
diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c
index 2d6c08b..f8e1447 100644
--- a/drivers/serial/sb1250-duart.c
+++ b/drivers/serial/sb1250-duart.c
@@ -924,7 +924,7 @@
static struct uart_driver sbd_reg = {
.owner = THIS_MODULE,
- .driver_name = "serial",
+ .driver_name = "sb1250_duart",
.dev_name = "duart",
.major = TTY_MAJOR,
.minor = SB1250_DUART_MINOR_BASE,
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 53b03c6..42d2e10 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1165,6 +1165,15 @@
return ret;
}
+static void uart_set_ldisc(struct tty_struct *tty)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+
+ if (port->ops->set_ldisc)
+ port->ops->set_ldisc(port);
+}
+
static void uart_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
@@ -1982,7 +1991,9 @@
static int serial_match_port(struct device *dev, void *data)
{
struct uart_match *match = data;
- dev_t devt = MKDEV(match->driver->major, match->driver->minor) + match->port->line;
+ struct tty_driver *tty_drv = match->driver->tty_driver;
+ dev_t devt = MKDEV(tty_drv->major, tty_drv->minor_start) +
+ match->port->line;
return dev->devt == devt; /* Actually, only one tty per port */
}
@@ -2288,6 +2299,7 @@
.unthrottle = uart_unthrottle,
.send_xchar = uart_send_xchar,
.set_termios = uart_set_termios,
+ .set_ldisc = uart_set_ldisc,
.stop = uart_stop,
.start = uart_start,
.hangup = uart_hangup,
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 01917c4..566a8b4 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -195,7 +195,7 @@
static struct uart_driver ucc_uart_driver = {
.owner = THIS_MODULE,
- .driver_name = "serial",
+ .driver_name = "ucc_uart",
.dev_name = "ttyQE",
.major = SERIAL_QE_MAJOR,
.minor = SERIAL_QE_MINOR,
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 41620c0..f5b60c7 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -25,6 +25,7 @@
#include <linux/ioctl.h>
#include <linux/fs.h>
#include <linux/device.h>
+#include <linux/err.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/mutex.h>
@@ -67,11 +68,12 @@
| SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP)
struct spidev_data {
- struct device dev;
+ dev_t devt;
spinlock_t spi_lock;
struct spi_device *spi;
struct list_head device_entry;
+ /* buffer is NULL unless this device is open (users > 0) */
struct mutex buf_lock;
unsigned users;
u8 *buffer;
@@ -165,14 +167,14 @@
mutex_lock(&spidev->buf_lock);
status = spidev_sync_read(spidev, count);
- if (status == 0) {
+ if (status > 0) {
unsigned long missing;
- missing = copy_to_user(buf, spidev->buffer, count);
- if (count && missing == count)
+ missing = copy_to_user(buf, spidev->buffer, status);
+ if (missing == status)
status = -EFAULT;
else
- status = count - missing;
+ status = status - missing;
}
mutex_unlock(&spidev->buf_lock);
@@ -198,8 +200,6 @@
missing = copy_from_user(spidev->buffer, buf, count);
if (missing == 0) {
status = spidev_sync_write(spidev, count);
- if (status == 0)
- status = count;
} else
status = -EFAULT;
mutex_unlock(&spidev->buf_lock);
@@ -467,7 +467,7 @@
mutex_lock(&device_list_lock);
list_for_each_entry(spidev, &device_list, device_entry) {
- if (spidev->dev.devt == inode->i_rdev) {
+ if (spidev->devt == inode->i_rdev) {
status = 0;
break;
}
@@ -500,10 +500,22 @@
mutex_lock(&device_list_lock);
spidev = filp->private_data;
filp->private_data = NULL;
+
+ /* last close? */
spidev->users--;
if (!spidev->users) {
+ int dofree;
+
kfree(spidev->buffer);
spidev->buffer = NULL;
+
+ /* ... after we unbound from the underlying device? */
+ spin_lock_irq(&spidev->spi_lock);
+ dofree = (spidev->spi == NULL);
+ spin_unlock_irq(&spidev->spi_lock);
+
+ if (dofree)
+ kfree(spidev);
}
mutex_unlock(&device_list_lock);
@@ -530,19 +542,7 @@
* It also simplifies memory management.
*/
-static void spidev_classdev_release(struct device *dev)
-{
- struct spidev_data *spidev;
-
- spidev = container_of(dev, struct spidev_data, dev);
- kfree(spidev);
-}
-
-static struct class spidev_class = {
- .name = "spidev",
- .owner = THIS_MODULE,
- .dev_release = spidev_classdev_release,
-};
+static struct class *spidev_class;
/*-------------------------------------------------------------------------*/
@@ -570,20 +570,20 @@
mutex_lock(&device_list_lock);
minor = find_first_zero_bit(minors, N_SPI_MINORS);
if (minor < N_SPI_MINORS) {
- spidev->dev.parent = &spi->dev;
- spidev->dev.class = &spidev_class;
- spidev->dev.devt = MKDEV(SPIDEV_MAJOR, minor);
- snprintf(spidev->dev.bus_id, sizeof spidev->dev.bus_id,
+ struct device *dev;
+
+ spidev->devt = MKDEV(SPIDEV_MAJOR, minor);
+ dev = device_create(spidev_class, &spi->dev, spidev->devt,
"spidev%d.%d",
spi->master->bus_num, spi->chip_select);
- status = device_register(&spidev->dev);
+ status = IS_ERR(dev) ? PTR_ERR(dev) : 0;
} else {
dev_dbg(&spi->dev, "no minor number available!\n");
status = -ENODEV;
}
if (status == 0) {
set_bit(minor, minors);
- dev_set_drvdata(&spi->dev, spidev);
+ spi_set_drvdata(spi, spidev);
list_add(&spidev->device_entry, &device_list);
}
mutex_unlock(&device_list_lock);
@@ -596,19 +596,21 @@
static int spidev_remove(struct spi_device *spi)
{
- struct spidev_data *spidev = dev_get_drvdata(&spi->dev);
+ struct spidev_data *spidev = spi_get_drvdata(spi);
/* make sure ops on existing fds can abort cleanly */
spin_lock_irq(&spidev->spi_lock);
spidev->spi = NULL;
+ spi_set_drvdata(spi, NULL);
spin_unlock_irq(&spidev->spi_lock);
/* prevent new opens */
mutex_lock(&device_list_lock);
list_del(&spidev->device_entry);
- dev_set_drvdata(&spi->dev, NULL);
- clear_bit(MINOR(spidev->dev.devt), minors);
- device_unregister(&spidev->dev);
+ device_destroy(spidev_class, spidev->devt);
+ clear_bit(MINOR(spidev->devt), minors);
+ if (spidev->users == 0)
+ kfree(spidev);
mutex_unlock(&device_list_lock);
return 0;
@@ -644,15 +646,15 @@
if (status < 0)
return status;
- status = class_register(&spidev_class);
- if (status < 0) {
+ spidev_class = class_create(THIS_MODULE, "spidev");
+ if (IS_ERR(spidev_class)) {
unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
- return status;
+ return PTR_ERR(spidev_class);
}
status = spi_register_driver(&spidev_spi);
if (status < 0) {
- class_unregister(&spidev_class);
+ class_destroy(spidev_class);
unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
}
return status;
@@ -662,7 +664,7 @@
static void __exit spidev_exit(void)
{
spi_unregister_driver(&spidev_spi);
- class_unregister(&spidev_class);
+ class_destroy(spidev_class);
unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
}
module_exit(spidev_exit);
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 75def13..538c570 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -537,12 +537,19 @@
int err = 0;
u32 tmp;
- might_sleep();
+ if (dev->bus->bustype != SSB_BUSTYPE_PCI) {
+ /* This SSB device is not on a PCI host-bus. So the IRQs are
+ * not routed through the PCI core.
+ * So we must not enable routing through the PCI core. */
+ goto out;
+ }
if (!pdev)
goto out;
bus = pdev->bus;
+ might_sleep_if(pdev->id.coreid != SSB_DEV_PCI);
+
/* Enable interrupts for this device. */
if (bus->host_pci &&
((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) {
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 7cf8851..d184f2a 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -1168,15 +1168,21 @@
int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask)
{
struct device *dma_dev = ssb_dev->dma_dev;
+ int err = 0;
#ifdef CONFIG_SSB_PCIHOST
- if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI)
- return dma_set_mask(dma_dev, mask);
+ if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI) {
+ err = pci_set_dma_mask(ssb_dev->bus->host_pci, mask);
+ if (err)
+ return err;
+ err = pci_set_consistent_dma_mask(ssb_dev->bus->host_pci, mask);
+ return err;
+ }
#endif
dma_dev->coherent_dma_mask = mask;
dma_dev->dma_mask = &dma_dev->coherent_dma_mask;
- return 0;
+ return err;
}
EXPORT_SYMBOL(ssb_dma_set_mask);
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 4b62852..a86e952 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -12,3 +12,12 @@
cooling devices.
All platforms with ACPI thermal support can use this driver.
If you want this support, you should say Y or M here.
+
+config THERMAL_HWMON
+ bool "Hardware monitoring support"
+ depends on HWMON=y || HWMON=THERMAL
+ help
+ The generic thermal sysfs driver's hardware monitoring support
+ requires a 2.10.7/3.0.2 or later lm-sensors userspace.
+
+ Say Y if your user-space is new enough.
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 6098787..fe07462 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -295,8 +295,8 @@
/* Device management */
-#if defined(CONFIG_HWMON) || \
- (defined(CONFIG_HWMON_MODULE) && defined(CONFIG_THERMAL_MODULE))
+#if defined(CONFIG_THERMAL_HWMON)
+
/* hwmon sys I/F */
#include <linux/hwmon.h>
static LIST_HEAD(thermal_hwmon_list);
diff --git a/drivers/usb/c67x00/c67x00-ll-hpi.c b/drivers/usb/c67x00/c67x00-ll-hpi.c
index 5100fbb..a9636f4 100644
--- a/drivers/usb/c67x00/c67x00-ll-hpi.c
+++ b/drivers/usb/c67x00/c67x00-ll-hpi.c
@@ -120,7 +120,7 @@
* Only data is little endian, addr has cpu endianess
*/
static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr,
- u16 *data, u16 count)
+ __le16 *data, u16 count)
{
unsigned long flags;
int i;
@@ -129,7 +129,7 @@
hpi_write_reg(dev, HPI_ADDR, addr);
for (i = 0; i < count; i++)
- hpi_write_reg(dev, HPI_DATA, cpu_to_le16(*data++));
+ hpi_write_reg(dev, HPI_DATA, le16_to_cpu(*data++));
spin_unlock_irqrestore(&dev->hpi.lock, flags);
}
@@ -138,7 +138,7 @@
* Only data is little endian, addr has cpu endianess
*/
static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr,
- u16 *data, u16 count)
+ __le16 *data, u16 count)
{
unsigned long flags;
int i;
@@ -146,7 +146,7 @@
spin_lock_irqsave(&dev->hpi.lock, flags);
hpi_write_reg(dev, HPI_ADDR, addr);
for (i = 0; i < count; i++)
- *data++ = le16_to_cpu(hpi_read_reg(dev, HPI_DATA));
+ *data++ = cpu_to_le16(hpi_read_reg(dev, HPI_DATA));
spin_unlock_irqrestore(&dev->hpi.lock, flags);
}
@@ -425,7 +425,7 @@
len--;
}
- hpi_write_words_le16(dev, addr, (u16 *)buf, len / 2);
+ hpi_write_words_le16(dev, addr, (__le16 *)buf, len / 2);
buf += len & ~0x01;
addr += len & ~0x01;
len &= 0x01;
@@ -456,7 +456,7 @@
len--;
}
- hpi_read_words_le16(dev, addr, (u16 *)buf, len / 2);
+ hpi_read_words_le16(dev, addr, (__le16 *)buf, len / 2);
buf += len & ~0x01;
addr += len & ~0x01;
len &= 0x01;
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 63c3404..c3201aff 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1125,9 +1125,6 @@
for (i = 0; i < acm->rx_buflimit; i++)
usb_kill_urb(acm->ru[i].urb);
- INIT_LIST_HEAD(&acm->filled_read_bufs);
- INIT_LIST_HEAD(&acm->spare_read_bufs);
-
tasklet_enable(&acm->urb_task);
cancel_work_sync(&acm->work);
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 107666d..731db05 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -611,8 +611,8 @@
goto err;
}
- desc->wMaxPacketSize = ep->wMaxPacketSize;
- desc->bMaxPacketSize0 = cpu_to_le16(udev->descriptor.bMaxPacketSize0);
+ desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize);
+ desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0;
desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
if (!desc->orq)
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 09a53e7..42a4364 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -924,6 +924,15 @@
return retval;
}
+void usb_enable_root_hub_irq (struct usb_bus *bus)
+{
+ struct usb_hcd *hcd;
+
+ hcd = container_of (bus, struct usb_hcd, self);
+ if (hcd->driver->hub_irq_enable && hcd->state != HC_STATE_HALT)
+ hcd->driver->hub_irq_enable (hcd);
+}
+
/*-------------------------------------------------------------------------*/
@@ -1684,19 +1693,30 @@
irqreturn_t usb_hcd_irq (int irq, void *__hcd)
{
struct usb_hcd *hcd = __hcd;
- int start = hcd->state;
+ unsigned long flags;
+ irqreturn_t rc;
- if (unlikely(start == HC_STATE_HALT ||
- !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
- return IRQ_NONE;
- if (hcd->driver->irq (hcd) == IRQ_NONE)
- return IRQ_NONE;
+ /* IRQF_DISABLED doesn't work correctly with shared IRQs
+ * when the first handler doesn't use it. So let's just
+ * assume it's never used.
+ */
+ local_irq_save(flags);
- set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+ if (unlikely(hcd->state == HC_STATE_HALT ||
+ !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+ rc = IRQ_NONE;
+ } else if (hcd->driver->irq(hcd) == IRQ_NONE) {
+ rc = IRQ_NONE;
+ } else {
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
- if (unlikely(hcd->state == HC_STATE_HALT))
- usb_hc_died (hcd);
- return IRQ_HANDLED;
+ if (unlikely(hcd->state == HC_STATE_HALT))
+ usb_hc_died(hcd);
+ rc = IRQ_HANDLED;
+ }
+
+ local_irq_restore(flags);
+ return rc;
}
/*-------------------------------------------------------------------------*/
@@ -1860,6 +1880,13 @@
/* enable irqs just before we start the controller */
if (hcd->driver->irq) {
+
+ /* IRQF_DISABLED doesn't work as advertised when used together
+ * with IRQF_SHARED. As usb_hcd_irq() will always disable
+ * interrupts we can remove it here.
+ */
+ irqflags &= ~IRQF_DISABLED;
+
snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
hcd->driver->description, hcd->self.busnum);
if ((retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index a0bf5df..b9de156 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -210,6 +210,8 @@
int (*bus_suspend)(struct usb_hcd *);
int (*bus_resume)(struct usb_hcd *);
int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
+ void (*hub_irq_enable)(struct usb_hcd *);
+ /* Needed only if port-change IRQs are level-triggered */
/* force handover of high-speed port to full-speed companion */
void (*relinquish_port)(struct usb_hcd *, int);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 8eb4da3..4cfe32a 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -644,6 +644,48 @@
#ifdef CONFIG_PM
+/* Try to identify which devices need USB-PERSIST handling */
+static int persistent_device(struct usb_device *udev)
+{
+ int i;
+ int retval;
+ struct usb_host_config *actconfig;
+
+ /* Explicitly not marked persistent? */
+ if (!udev->persist_enabled)
+ return 0;
+
+ /* No active config? */
+ actconfig = udev->actconfig;
+ if (!actconfig)
+ return 0;
+
+ /* FIXME! We should check whether it's open here or not! */
+
+ /*
+ * Check that all the interface drivers have a
+ * 'reset_resume' entrypoint
+ */
+ retval = 0;
+ for (i = 0; i < actconfig->desc.bNumInterfaces; i++) {
+ struct usb_interface *intf;
+ struct usb_driver *driver;
+
+ intf = actconfig->interface[i];
+ if (!intf->dev.driver)
+ continue;
+ driver = to_usb_driver(intf->dev.driver);
+ if (!driver->reset_resume)
+ return 0;
+ /*
+ * We have at least one driver, and that one
+ * has a reset_resume method.
+ */
+ retval = 1;
+ }
+ return retval;
+}
+
static void hub_restart(struct usb_hub *hub, int type)
{
struct usb_device *hdev = hub->hdev;
@@ -671,26 +713,19 @@
}
/* Was the power session lost while we were suspended? */
- switch (type) {
- case HUB_RESET_RESUME:
- portstatus = 0;
- portchange = USB_PORT_STAT_C_CONNECTION;
- break;
+ status = hub_port_status(hub, port1, &portstatus, &portchange);
- case HUB_RESET:
- case HUB_RESUME:
- status = hub_port_status(hub, port1,
- &portstatus, &portchange);
- break;
- }
+ /* If the device is gone, khubd will handle it later */
+ if (status == 0 && !(portstatus & USB_PORT_STAT_CONNECTION))
+ continue;
/* For "USB_PERSIST"-enabled children we must
* mark the child device for reset-resume and
* turn off the various status changes to prevent
* khubd from disconnecting it later.
*/
- if (udev->persist_enabled && status == 0 &&
- !(portstatus & USB_PORT_STAT_ENABLE)) {
+ if (status == 0 && !(portstatus & USB_PORT_STAT_ENABLE) &&
+ persistent_device(udev)) {
if (portchange & USB_PORT_STAT_C_ENABLE)
clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_ENABLE);
@@ -2038,6 +2073,8 @@
}
clear_bit(port1, hub->busy_bits);
+ if (!hub->hdev->parent && !hub->busy_bits[0])
+ usb_enable_root_hub_irq(hub->hdev->bus);
if (status == 0)
status = finish_port_resume(udev);
@@ -2967,6 +3004,11 @@
hub->activating = 0;
+ /* If this is a root hub, tell the HCD it's okay to
+ * re-enable port-change interrupts now. */
+ if (!hdev->parent && !hub->busy_bits[0])
+ usb_enable_root_hub_irq(hdev->bus);
+
loop_autopm:
/* Allow autosuspend if we're not going to run again */
if (list_empty(&hub->event_list))
@@ -3192,6 +3234,8 @@
break;
}
clear_bit(port1, parent_hub->busy_bits);
+ if (!parent_hdev->parent && !parent_hub->busy_bits[0])
+ usb_enable_root_hub_irq(parent_hdev->bus);
if (ret < 0)
goto re_enumerate;
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 3da1ab4..c070b34 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -47,6 +47,9 @@
/* Edirol SD-20 */
{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* appletouch */
+ { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Avision AV600U */
{ USB_DEVICE(0x0638, 0x0a13), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 1ef6df3..228797e 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -300,8 +300,8 @@
module will be called r8a66597-hcd.
config SUPERH_ON_CHIP_R8A66597
- boolean "Enable SuperH on-chip USB like the R8A66597"
- depends on USB_R8A66597_HCD && CPU_SUBTYPE_SH7366
+ boolean "Enable SuperH on-chip R8A66597 USB"
+ depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723)
help
- Renesas SuperH processor has USB like the R8A66597.
- This driver supported processor is SH7366.
+ This driver enables support for the on-chip R8A66597 in the
+ SH7366 and SH7723 processors.
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 35a0309..90245fd 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -177,6 +177,15 @@
static inline void
timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
{
+ /* Don't override timeouts which shrink or (later) disable
+ * the async ring; just the I/O watchdog. Note that if a
+ * SHRINK were pending, OFF would never be requested.
+ */
+ if (timer_pending(&ehci->watchdog)
+ && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
+ & ehci->actions))
+ return;
+
if (!test_and_set_bit (action, &ehci->actions)) {
unsigned long t;
@@ -192,15 +201,7 @@
t = EHCI_SHRINK_JIFFIES;
break;
}
- t += jiffies;
- // all timings except IAA watchdog can be overridden.
- // async queue SHRINK often precedes IAA. while it's ready
- // to go OFF neither can matter, and afterwards the IO
- // watchdog stops unless there's still periodic traffic.
- if (time_before_eq(t, ehci->watchdog.expires)
- && timer_pending (&ehci->watchdog))
- return;
- mod_timer (&ehci->watchdog, t);
+ mod_timer(&ehci->watchdog, t + jiffies);
}
}
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index c9cec87..65aa5ec 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -2207,14 +2207,14 @@
goto err_put;
}
- ret = usb_add_hcd(hcd, irq, irqflags);
- if (ret)
- goto err_unmap;
-
hcd->irq = irq;
hcd->rsrc_start = res_start;
hcd->rsrc_len = res_len;
+ ret = usb_add_hcd(hcd, irq, irqflags);
+ if (ret)
+ goto err_unmap;
+
return hcd;
err_unmap:
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 440bf94..c9db3fe 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -104,8 +104,8 @@
static u32 iolength;
static u32 pci_mem_phy0;
static u32 length;
-static u8 *chip_addr;
-static u8 *iobase;
+static u8 __iomem *chip_addr;
+static u8 __iomem *iobase;
static int __devinit isp1761_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index c96db11..e534f9d 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -261,6 +261,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 1b9abdb..68c17f5 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -8,7 +8,7 @@
* Bus Glue for AMD Alchemy Au1xxx
*
* Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Rusell King et al.
+ * Based on fragments of previous driver by Russell King et al.
*
* Modified for LH7A404 from ohci-sa1111.c
* by Durgesh Pattamatta <pattamattad@sharpsec.com>
@@ -288,6 +288,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 06aadfb..5adaf36 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -135,6 +135,7 @@
.get_frame_number = ohci_get_frame,
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 33f1c1c..a8160d6 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1054,7 +1054,7 @@
#ifdef CONFIG_MFD_SM501
#include "ohci-sm501.c"
-#define PLATFORM_DRIVER ohci_hcd_sm501_driver
+#define SM501_OHCI_DRIVER ohci_hcd_sm501_driver
#endif
#if !defined(PCI_DRIVER) && \
@@ -1062,6 +1062,7 @@
!defined(OF_PLATFORM_DRIVER) && \
!defined(SA1111_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && \
+ !defined(SM501_OHCI_DRIVER) && \
!defined(SSB_OHCI_DRIVER)
#error "missing bus glue for ohci-hcd"
#endif
@@ -1121,9 +1122,18 @@
goto error_ssb;
#endif
+#ifdef SM501_OHCI_DRIVER
+ retval = platform_driver_register(&SM501_OHCI_DRIVER);
+ if (retval < 0)
+ goto error_sm501;
+#endif
+
return retval;
/* Error path */
+#ifdef SM501_OHCI_DRIVER
+ error_sm501:
+#endif
#ifdef SSB_OHCI_DRIVER
error_ssb:
#endif
@@ -1159,6 +1169,9 @@
static void __exit ohci_hcd_mod_exit(void)
{
+#ifdef SM501_OHCI_DRIVER
+ platform_driver_unregister(&SM501_OHCI_DRIVER);
+#endif
#ifdef SSB_OHCI_DRIVER
ssb_driver_unregister(&SSB_OHCI_DRIVER);
#endif
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 79a7802..b567392 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -36,6 +36,18 @@
/*-------------------------------------------------------------------------*/
+/* hcd->hub_irq_enable() */
+static void ohci_rhsc_enable (struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+ spin_lock_irq(&ohci->lock);
+ if (!ohci->autostop)
+ del_timer(&hcd->rh_timer); /* Prevent next poll */
+ ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+ spin_unlock_irq(&ohci->lock);
+}
+
#define OHCI_SCHED_ENABLES \
(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
@@ -362,28 +374,18 @@
int any_connected)
{
int poll_rh = 1;
- int rhsc;
- rhsc = ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC;
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_OPER:
- /* If no status changes are pending, enable status-change
- * interrupts.
- */
- if (!rhsc && !changed) {
- rhsc = OHCI_INTR_RHSC;
- ohci_writel(ohci, rhsc, &ohci->regs->intrenable);
- }
-
- /* Keep on polling until we know a device is connected
- * and RHSC is enabled, or until we autostop.
- */
+ /* keep on polling until we know a device is connected
+ * and RHSC is enabled */
if (!ohci->autostop) {
if (any_connected ||
!device_may_wakeup(&ohci_to_hcd(ohci)
->self.root_hub->dev)) {
- if (rhsc)
+ if (ohci_readl(ohci, &ohci->regs->intrenable) &
+ OHCI_INTR_RHSC)
poll_rh = 0;
} else {
ohci->autostop = 1;
@@ -396,13 +398,12 @@
ohci->autostop = 0;
ohci->next_statechange = jiffies +
STATECHANGE_DELAY;
- } else if (rhsc && time_after_eq(jiffies,
+ } else if (time_after_eq(jiffies,
ohci->next_statechange)
&& !ohci->ed_rm_list
&& !(ohci->hc_control &
OHCI_SCHED_ENABLES)) {
ohci_rh_suspend(ohci, 1);
- poll_rh = 0;
}
}
break;
@@ -416,12 +417,6 @@
else
usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
} else {
- if (!rhsc && (ohci->autostop ||
- ohci_to_hcd(ohci)->self.root_hub->
- do_remote_wakeup))
- ohci_writel(ohci, OHCI_INTR_RHSC,
- &ohci->regs->intrenable);
-
/* everything is idle, no need for polling */
poll_rh = 0;
}
@@ -443,16 +438,12 @@
static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
int any_connected)
{
- /* If RHSC is enabled, don't poll */
- if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
- return 0;
+ int poll_rh = 1;
- /* If no status changes are pending, enable status-change interrupts */
- if (!changed) {
- ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
- return 0;
- }
- return 1;
+ /* keep on polling until RHSC is enabled */
+ if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
+ poll_rh = 0;
+ return poll_rh;
}
#endif /* CONFIG_PM */
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index 96d14fa..1ef5d48 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -8,7 +8,7 @@
* Bus Glue for Sharp LH7A404
*
* Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Rusell King et al.
+ * Based on fragments of previous driver by Russell King et al.
*
* Modified for LH7A404 from ohci-sa1111.c
* by Durgesh Pattamatta <pattamattad@sharpsec.com>
@@ -193,6 +193,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 6859fb5..3a7c24c 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -466,6 +466,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 3bf175d..4696cc9 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -327,6 +327,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 664f07e..28b458f 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -280,6 +280,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c
index 28467e2..605d59c 100644
--- a/drivers/usb/host/ohci-pnx8550.c
+++ b/drivers/usb/host/ohci-pnx8550.c
@@ -201,6 +201,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index 50e55db..a672527 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -72,6 +72,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index cd3398b..523c301 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -172,6 +172,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index bfdeb0d2..c1935ae 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -68,6 +68,7 @@
.get_frame_number = ohci_get_frame,
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
.start_port_reset = ohci_start_port_reset,
#if defined(CONFIG_PM)
.bus_suspend = ohci_bus_suspend,
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 70b0d4b..d4ee27d 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -298,6 +298,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 9c9f3b5..9b54740 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -952,6 +952,7 @@
struct urb *urb;
urb_priv_t *urb_priv;
__hc32 savebits;
+ u32 tdINFO;
td = list_entry (entry, struct td, td_list);
urb = td->urb;
@@ -966,6 +967,17 @@
savebits = *prev & ~cpu_to_hc32 (ohci, TD_MASK);
*prev = td->hwNextTD | savebits;
+ /* If this was unlinked, the TD may not have been
+ * retired ... so manually save the data toggle.
+ * The controller ignores the value we save for
+ * control and ISO endpoints.
+ */
+ tdINFO = hc32_to_cpup(ohci, &td->hwINFO);
+ if ((tdINFO & TD_T) == TD_T_DATA0)
+ ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_C);
+ else if ((tdINFO & TD_T) == TD_T_DATA1)
+ ed->hwHeadP |= cpu_to_hc32(ohci, ED_C);
+
/* HC may have partly processed this TD */
td_done (ohci, urb, td);
urb_priv->td_cnt++;
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index a73d2ff..3c7a740 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -8,7 +8,7 @@
* USB Bus Glue for Samsung S3C2410
*
* Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Rusell King et al.
+ * Based on fragments of previous driver by Russell King et al.
*
* Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c
* by Ben Dooks, <ben@simtec.co.uk>
@@ -466,6 +466,7 @@
*/
.hub_status_data = ohci_s3c2410_hub_status_data,
.hub_control = ohci_s3c2410_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 99438c6..2e9dceb 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -8,7 +8,7 @@
* SA1111 Bus Glue
*
* Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Rusell King et al.
+ * Based on fragments of previous driver by Russell King et al.
*
* This file is licenced under the GPL.
*/
@@ -231,6 +231,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index 60f03cc..e7ee607 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -68,6 +68,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index e899a77..e610698 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -75,6 +75,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
index c4265ca..7275186 100644
--- a/drivers/usb/host/ohci-ssb.c
+++ b/drivers/usb/host/ohci-ssb.c
@@ -81,6 +81,7 @@
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index f293074..9b6323f 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -2934,6 +2934,16 @@
return 0;
}
+static void u132_hub_irq_enable(struct usb_hcd *hcd)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ } else if (u132->going > 0)
+ dev_err(&u132->platform_dev->dev, "device is being removed\n");
+}
+
#ifdef CONFIG_PM
static int u132_bus_suspend(struct usb_hcd *hcd)
@@ -2985,6 +2995,7 @@
.bus_suspend = u132_bus_suspend,
.bus_resume = u132_bus_resume,
.start_port_reset = u132_start_port_reset,
+ .hub_irq_enable = u132_hub_irq_enable,
};
/*
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index eb6c069..001789c 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -272,6 +272,7 @@
config USB_ISIGHTFW
tristate "iSight firmware loading support"
depends on USB
+ select FW_LOADER
help
This driver loads firmware for USB Apple iSight cameras, allowing
them to be driven by the USB video class driver available at
diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
index 390e048..9f30aa1 100644
--- a/drivers/usb/misc/isight_firmware.c
+++ b/drivers/usb/misc/isight_firmware.c
@@ -39,9 +39,12 @@
struct usb_device *dev = interface_to_usbdev(intf);
int llen, len, req, ret = 0;
const struct firmware *firmware;
- unsigned char *buf;
+ unsigned char *buf = kmalloc(50, GFP_KERNEL);
unsigned char data[4];
- char *ptr;
+ u8 *ptr;
+
+ if (!buf)
+ return -ENOMEM;
if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) {
printk(KERN_ERR "Unable to load isight firmware\n");
@@ -59,7 +62,7 @@
goto out;
}
- while (1) {
+ while (ptr+4 <= firmware->data+firmware->size) {
memcpy(data, ptr, 4);
len = (data[0] << 8 | data[1]);
req = (data[2] << 8 | data[3]);
@@ -71,10 +74,14 @@
continue;
for (; len > 0; req += 50) {
- llen = len > 50 ? 50 : len;
+ llen = min(len, 50);
len -= llen;
-
- buf = kmalloc(llen, GFP_KERNEL);
+ if (ptr+llen > firmware->data+firmware->size) {
+ printk(KERN_ERR
+ "Malformed isight firmware");
+ ret = -ENODEV;
+ goto out;
+ }
memcpy(buf, ptr, llen);
ptr += llen;
@@ -89,16 +96,18 @@
goto out;
}
- kfree(buf);
}
}
+
if (usb_control_msg
(dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1,
300) != 1) {
printk(KERN_ERR "isight firmware loading completion failed\n");
ret = -ENODEV;
}
+
out:
+ kfree(buf);
release_firmware(firmware);
return ret;
}
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index cb7fa0e..33182f4 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3264,8 +3264,6 @@
/* decrement our usage count */
kref_put(&sisusb->kref, sisusb_delete);
-
- dev_info(&sisusb->sisusb_dev->dev, "Disconnected\n");
}
static struct usb_device_id sisusb_table [] = {
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 5234e7a..0ff4a39 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -637,6 +637,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
+ { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 06e0eca..8302eca 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -828,6 +828,9 @@
/* Propox devices */
#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
+/* Rig Expert Ukraine devices */
+#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index ea924dc..d9fb376 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -570,7 +570,12 @@
.description = "PocketPC PDA",
.usb_driver = &ipaq_driver,
.id_table = ipaq_id_table,
- .num_ports = 2,
+ /*
+ * some devices have an extra endpoint, which
+ * must be ignored as it would make the core
+ * create a second port which oopses when used
+ */
+ .num_ports = 1,
.open = ipaq_open,
.close = ipaq_close,
.attach = ipaq_startup,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 43cfde8..a73420d 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -306,6 +306,7 @@
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
+ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 103195a..2a0dd1b 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -57,6 +57,7 @@
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index cff160a..6ac3bbc 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -15,6 +15,7 @@
#define PL2303_PRODUCT_ID_RSAQ3 0xaaa2
#define PL2303_PRODUCT_ID_ALDIGA 0x0611
#define PL2303_PRODUCT_ID_MMX 0x0612
+#define PL2303_PRODUCT_ID_GPRS 0x0609
#define ATEN_VENDOR_ID 0x0557
#define ATEN_VENDOR_ID2 0x0547
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 45fe366..39a7c11 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -402,11 +402,19 @@
US_FL_IGNORE_RESIDUE ),
#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
+/* CY7C68300 : support atacb */
UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999,
"Cypress",
"Cypress AT2LP",
US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
0),
+
+/* CY7C68310 : support atacb and atacb2 */
+UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999,
+ "Cypress",
+ "Cypress ISD-300LP",
+ US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
+ 0),
#endif
/* Reported by Simon Levitt <simon@whattf.com>
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 002b61b..e0c5f96 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1825,12 +1825,13 @@
config FB_W100
tristate "W100 frame buffer support"
- depends on FB && PXA_SHARPSL
+ depends on FB && ARCH_PXA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
---help---
Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
+ It can also drive the w3220 chip found on iPAQ hx4700.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index 35ac9d9..c14b243 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -2432,9 +2432,9 @@
info->screen_size = board_size;
cinfo->unmap = cirrusfb_pci_unmap;
- printk(KERN_INFO " RAM (%lu kB) at 0xx%lx, ",
- info->screen_size >> 10, board_addr);
- printk(KERN_INFO "Cirrus Logic chipset on PCI bus\n");
+ printk(KERN_INFO "RAM (%lu kB) at 0x%lx, Cirrus "
+ "Logic chipset on PCI bus\n",
+ info->screen_size >> 10, board_addr);
pci_set_drvdata(pdev, info);
ret = cirrusfb_register(info);
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 5fa8b76..97aff8d 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -2275,9 +2275,7 @@
* in fb_set_var()
*/
info->var.activate = var.activate;
- var.yoffset = info->var.yoffset;
- var.xoffset = info->var.xoffset;
- var.vmode = info->var.vmode;
+ var.vmode |= info->var.vmode & ~FB_VMODE_MASK;
fb_set_var(info, &var);
ops->var = info->var;
diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index 24843fd..59df132 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -74,6 +74,7 @@
{
struct fb_info *info = vma->vm_private_data;
struct fb_deferred_io *fbdefio = info->fbdefio;
+ struct page *cur;
/* this is a callback we get when userspace first tries to
write to the page. we schedule a workqueue. that workqueue
@@ -83,7 +84,24 @@
/* protect against the workqueue changing the page list */
mutex_lock(&fbdefio->lock);
- list_add(&page->lru, &fbdefio->pagelist);
+
+ /* we loop through the pagelist before adding in order
+ to keep the pagelist sorted */
+ list_for_each_entry(cur, &fbdefio->pagelist, lru) {
+ /* this check is to catch the case where a new
+ process could start writing to the same page
+ through a new pte. this new access can cause the
+ mkwrite even when the original ps's pte is marked
+ writable */
+ if (unlikely(cur == page))
+ goto page_already_added;
+ else if (cur->index > page->index)
+ break;
+ }
+
+ list_add_tail(&page->lru, &cur->lru);
+
+page_already_added:
mutex_unlock(&fbdefio->lock);
/* come back after delay to process the deferred IO */
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index b50bb03..09d7e22 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -286,7 +286,7 @@
* rheap and make the furture large allocation fail.
*/
-void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys)
+static void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys)
{
void *virt;
@@ -311,12 +311,12 @@
memset(virt, 0, size);
}
- pr_debug("rh virt=%p phys=%lx\n", virt, *phys);
+ pr_debug("rh virt=%p phys=%llx\n", virt, (unsigned long long)*phys);
return virt;
}
-void fsl_diu_free(void *p, unsigned long size)
+static void fsl_diu_free(void *p, unsigned long size)
{
pr_debug("p=%p size=%lu\n", p, size);
@@ -770,7 +770,7 @@
info->fix.smem_len = info->fix.line_length * info->var.yres_virtual;
pr_debug("MAP_VIDEO_MEMORY: smem_len = %d\n", info->fix.smem_len);
info->screen_base = fsl_diu_alloc(info->fix.smem_len, &phys);
- if (info->screen_base == 0) {
+ if (info->screen_base == NULL) {
printk(KERN_ERR "Unable to allocate fb memory\n");
return -ENOMEM;
}
@@ -788,7 +788,7 @@
static void unmap_video_memory(struct fb_info *info)
{
fsl_diu_free(info->screen_base, info->fix.smem_len);
- info->screen_base = 0;
+ info->screen_base = NULL;
info->fix.smem_start = 0;
info->fix.smem_len = 0;
}
@@ -1158,7 +1158,7 @@
return 0;
}
-static int install_fb(struct fb_info *info)
+static int __devinit install_fb(struct fb_info *info)
{
int rc;
struct mfb_info *mfbi = info->par;
@@ -1233,7 +1233,7 @@
return 0;
}
-static void __exit uninstall_fb(struct fb_info *info)
+static void uninstall_fb(struct fb_info *info)
{
struct mfb_info *mfbi = info->par;
@@ -1287,7 +1287,7 @@
/* Read to clear the status */
status = in_be32(&hw->int_status);
- ret = request_irq(irq, fsl_diu_isr, 0, "diu", 0);
+ ret = request_irq(irq, fsl_diu_isr, 0, "diu", NULL);
if (ret)
pr_info("Request diu IRQ failed.\n");
else {
@@ -1312,7 +1312,7 @@
/* Disable all LCDC interrupt */
out_be32(&hw->int_mask, 0x1f);
- free_irq(irq, 0);
+ free_irq(irq, NULL);
}
#ifdef CONFIG_PM
@@ -1320,7 +1320,7 @@
* Power management hooks. Note that we won't be called from IRQ context,
* unlike the blank functions above, so we may sleep.
*/
-static int fsl_diu_suspend(struct of_device *dev, pm_message_t state)
+static int fsl_diu_suspend(struct of_device *ofdev, pm_message_t state)
{
struct fsl_diu_data *machine_data;
@@ -1330,7 +1330,7 @@
return 0;
}
-static int fsl_diu_resume(struct of_device *dev)
+static int fsl_diu_resume(struct of_device *ofdev)
{
struct fsl_diu_data *machine_data;
@@ -1353,7 +1353,8 @@
dma_addr_t paddr = 0;
ssize = size + bytes_align;
- buf->vaddr = dma_alloc_coherent(0, ssize, &paddr, GFP_DMA | __GFP_ZERO);
+ buf->vaddr = dma_alloc_coherent(NULL, ssize, &paddr, GFP_DMA |
+ __GFP_ZERO);
if (!buf->vaddr)
return -ENOMEM;
@@ -1371,7 +1372,7 @@
static void free_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
{
- dma_free_coherent(0, size + bytes_align,
+ dma_free_coherent(NULL, size + bytes_align,
buf->vaddr, (buf->paddr - buf->offset));
return;
}
@@ -1411,7 +1412,7 @@
return diu_ops.show_monitor_port(machine_data->monitor_port, buf);
}
-static int fsl_diu_probe(struct of_device *ofdev,
+static int __devinit fsl_diu_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = ofdev->node;
diff --git a/drivers/video/hgafb.c b/drivers/video/hgafb.c
index fb9e672..c18880d 100644
--- a/drivers/video/hgafb.c
+++ b/drivers/video/hgafb.c
@@ -279,7 +279,7 @@
static int __init hga_card_detect(void)
{
- int count=0;
+ int count = 0;
void __iomem *p, *q;
unsigned short p_save, q_save;
@@ -303,20 +303,18 @@
writew(0x55aa, p); if (readw(p) == 0x55aa) count++;
writew(p_save, p);
- if (count != 2) {
- return 0;
- }
+ if (count != 2)
+ goto error;
/* Ok, there is definitely a card registering at the correct
* memory location, so now we do an I/O port test.
*/
- if (!test_hga_b(0x66, 0x0f)) { /* cursor low register */
- return 0;
- }
- if (!test_hga_b(0x99, 0x0f)) { /* cursor low register */
- return 0;
- }
+ if (!test_hga_b(0x66, 0x0f)) /* cursor low register */
+ goto error;
+
+ if (!test_hga_b(0x99, 0x0f)) /* cursor low register */
+ goto error;
/* See if the card is a Hercules, by checking whether the vsync
* bit of the status register is changing. This test lasts for
@@ -331,7 +329,7 @@
}
if (p_save == q_save)
- return 0;
+ goto error;
switch (inb_p(HGA_STATUS_PORT) & 0x70) {
case 0x10:
@@ -348,6 +346,12 @@
break;
}
return 1;
+error:
+ if (release_io_ports)
+ release_region(0x3b0, 12);
+ if (release_io_port)
+ release_region(0x3bf, 1);
+ return 0;
}
/**
diff --git a/drivers/video/leo.c b/drivers/video/leo.c
index 8bc46e9..13fea61 100644
--- a/drivers/video/leo.c
+++ b/drivers/video/leo.c
@@ -17,8 +17,8 @@
#include <linux/fb.h>
#include <linux/mm.h>
#include <linux/of_device.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/fbio.h>
#include "sbuslib.h"
@@ -33,7 +33,6 @@
static int leo_mmap(struct fb_info *, struct vm_area_struct *);
static int leo_ioctl(struct fb_info *, unsigned int, unsigned long);
-static int leo_pan_display(struct fb_var_screeninfo *, struct fb_info *);
/*
* Frame buffer operations
@@ -43,7 +42,6 @@
.owner = THIS_MODULE,
.fb_setcolreg = leo_setcolreg,
.fb_blank = leo_blank,
- .fb_pan_display = leo_pan_display,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
@@ -78,7 +76,7 @@
#define LEO_CUR_TYPE_CMAP 0x00000050
struct leo_cursor {
- u8 xxx0[16];
+ u8 xxx0[16];
u32 cur_type;
u32 cur_misc;
u32 cur_cursxy;
@@ -105,7 +103,7 @@
struct leo_lc_ss0_krn {
u32 misc;
- u8 xxx0[0x800-4];
+ u8 xxx0[0x800-4];
u32 rev;
};
@@ -116,7 +114,7 @@
u32 fontt;
u32 extent;
u32 src;
- u32 dst;
+ u32 dst;
u32 copy;
u32 fill;
};
@@ -129,8 +127,8 @@
u8 unknown;
};
-struct leo_ld {
- u8 xxx0[0xe00];
+struct leo_ld_ss0 {
+ u8 xxx0[0xe00];
u32 csr;
u32 wid;
u32 wmask;
@@ -144,13 +142,13 @@
u32 src; /* Copy/Scroll (SS0 only) */
u32 dst; /* Copy/Scroll/Fill (SS0 only) */
u32 extent; /* Copy/Scroll/Fill size (SS0 only) */
- u32 xxx1[3];
+ u32 xxx1[3];
u32 setsem; /* SS1 only */
u32 clrsem; /* SS1 only */
u32 clrpick; /* SS1 only */
u32 clrdat; /* SS1 only */
u32 alpha; /* SS1 only */
- u8 xxx2[0x2c];
+ u8 xxx2[0x2c];
u32 winbg;
u32 planemask;
u32 rop;
@@ -199,11 +197,12 @@
static void leo_wait(struct leo_lx_krn __iomem *lx_krn)
{
int i;
-
+
for (i = 0;
- (sbus_readl(&lx_krn->krn_csr) & LEO_KRN_CSR_PROGRESS) && i < 300000;
+ (sbus_readl(&lx_krn->krn_csr) & LEO_KRN_CSR_PROGRESS) &&
+ i < 300000;
i++)
- udelay (1); /* Busy wait at most 0.3 sec */
+ udelay(1); /* Busy wait at most 0.3 sec */
return;
}
@@ -221,7 +220,7 @@
unsigned transp, struct fb_info *info)
{
struct leo_par *par = (struct leo_par *) info->par;
- struct leo_lx_krn __iomem *lx_krn = par->lx_krn;
+ struct leo_lx_krn __iomem *lx_krn = par->lx_krn;
unsigned long flags;
u32 val;
int i;
@@ -408,7 +407,7 @@
leo_wait(lx_krn);
for (i = 0, wi = wl->wl_list; i < wl->wl_count; i++, wi++) {
- switch(wi->wi_type) {
+ switch (wi->wi_type) {
case FB_WID_DBL_8:
j = (wi->wi_index & 0xf) + 0x40;
break;
@@ -453,13 +452,12 @@
wi.wi_index = 1;
wi.wi_values [0] = 0x30;
leo_wid_put(info, &wl);
-
}
static void leo_switch_from_graph(struct fb_info *info)
{
struct leo_par *par = (struct leo_par *) info->par;
- struct leo_ld __iomem *ss = (struct leo_ld __iomem *) par->ld_ss0;
+ struct leo_ld_ss0 __iomem *ss = par->ld_ss0;
unsigned long flags;
u32 val;
@@ -485,21 +483,15 @@
val = sbus_readl(&par->lc_ss0_usr->csr);
} while (val & 0x20000000);
+ /* setup screen buffer for cfb_* functions */
+ sbus_writel(1, &ss->wid);
+ sbus_writel(0x00ffffff, &ss->planemask);
+ sbus_writel(0x310b90, &ss->rop);
+ sbus_writel(0, &par->lc_ss0_usr->addrspace);
+
spin_unlock_irqrestore(&par->lock, flags);
}
-static int leo_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
-{
- /* We just use this to catch switches out of
- * graphics mode.
- */
- leo_switch_from_graph(info);
-
- if (var->xoffset || var->yoffset || var->vmode)
- return -EINVAL;
- return 0;
-}
-
static void leo_init_hw(struct fb_info *info)
{
struct leo_par *par = (struct leo_par *) info->par;
@@ -542,7 +534,8 @@
of_iounmap(&op->resource[0], info->screen_base, 0x800000);
}
-static int __devinit leo_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit leo_probe(struct of_device *op,
+ const struct of_device_id *match)
{
struct device_node *dp = op->node;
struct fb_info *info;
@@ -594,8 +587,9 @@
!info->screen_base)
goto out_unmap_regs;
- info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
+ info->flags = FBINFO_DEFAULT;
info->fbops = &leo_ops;
+ info->pseudo_palette = par->clut_data;
leo_init_wids(info);
leo_init_hw(info);
@@ -649,7 +643,7 @@
static struct of_device_id leo_match[] = {
{
- .name = "leo",
+ .name = "SUNW,leo",
},
{},
};
diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
index 4735621..d3c3af5 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/modedb.c
@@ -28,6 +28,7 @@
#endif
const char *fb_mode_option;
+EXPORT_SYMBOL_GPL(fb_mode_option);
/*
* Standard video mode definitions (taken from XFree86)
@@ -590,6 +591,7 @@
"", (margins) ? " with margins" : "", (interlace) ?
" interlaced" : "");
+ memset(&cvt_mode, 0, sizeof(cvt_mode));
cvt_mode.xres = xres;
cvt_mode.yres = yres;
cvt_mode.refresh = (refresh) ? refresh : 60;
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 274bc93..fafe7db 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -573,8 +573,8 @@
dma_desc->fdadr = fbi->dma_buff_phys + dma_desc_off;
fbi->fdadr[dma] = fbi->dma_buff_phys + dma_desc_off;
} else {
- pal_desc = &fbi->dma_buff->pal_desc[dma];
- pal_desc_off = offsetof(struct pxafb_dma_buff, dma_desc[pal]);
+ pal_desc = &fbi->dma_buff->pal_desc[pal];
+ pal_desc_off = offsetof(struct pxafb_dma_buff, pal_desc[pal]);
pal_desc->fsadr = fbi->dma_buff_phys + pal * PALETTE_SIZE;
pal_desc->fidr = 0;
@@ -1246,7 +1246,7 @@
* cache. Once this area is remapped, all virtual memory
* access to the video memory should occur at the new region.
*/
-static int __init pxafb_map_video_memory(struct pxafb_info *fbi)
+static int __devinit pxafb_map_video_memory(struct pxafb_info *fbi)
{
/*
* We reserve one page for the palette, plus the size
@@ -1276,6 +1276,8 @@
fbi->dma_buff_phys = fbi->map_dma;
fbi->palette_cpu = (u16 *) fbi->dma_buff->palette;
+ pr_debug("pxafb: palette_mem_size = 0x%08lx\n", fbi->palette_size*sizeof(u16));
+
#ifdef CONFIG_FB_PXA_SMARTPANEL
fbi->smart_cmds = (uint16_t *) fbi->dma_buff->cmd_buff;
fbi->n_smart_cmds = 0;
@@ -1346,7 +1348,7 @@
pxafb_decode_mode_info(fbi, inf->modes, inf->num_modes);
}
-static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev)
+static struct pxafb_info * __devinit pxafb_init_fbinfo(struct device *dev)
{
struct pxafb_info *fbi;
void *addr;
@@ -1408,7 +1410,7 @@
}
#ifdef CONFIG_FB_PXA_PARAMETERS
-static int __init parse_opt_mode(struct device *dev, const char *this_opt)
+static int __devinit parse_opt_mode(struct device *dev, const char *this_opt)
{
struct pxafb_mach_info *inf = dev->platform_data;
@@ -1467,7 +1469,7 @@
return 0;
}
-static int __init parse_opt(struct device *dev, char *this_opt)
+static int __devinit parse_opt(struct device *dev, char *this_opt)
{
struct pxafb_mach_info *inf = dev->platform_data;
struct pxafb_mode_info *mode = &inf->modes[0];
@@ -1565,7 +1567,7 @@
return 0;
}
-static int __init pxafb_parse_options(struct device *dev, char *options)
+static int __devinit pxafb_parse_options(struct device *dev, char *options)
{
char *this_opt;
int ret;
@@ -1586,8 +1588,8 @@
static char g_options[256] __devinitdata = "";
-#ifndef CONFIG_MODULES
-static int __devinit pxafb_setup_options(void)
+#ifndef MODULE
+static int __init pxafb_setup_options(void)
{
char *options = NULL;
@@ -1611,7 +1613,7 @@
#define pxafb_setup_options() (0)
#endif
-static int __init pxafb_probe(struct platform_device *dev)
+static int __devinit pxafb_probe(struct platform_device *dev)
{
struct pxafb_info *fbi;
struct pxafb_mach_info *inf;
@@ -1683,14 +1685,14 @@
if (r == NULL) {
dev_err(&dev->dev, "no I/O memory resource defined\n");
ret = -ENODEV;
- goto failed;
+ goto failed_fbi;
}
r = request_mem_region(r->start, r->end - r->start + 1, dev->name);
if (r == NULL) {
dev_err(&dev->dev, "failed to request I/O memory\n");
ret = -EBUSY;
- goto failed;
+ goto failed_fbi;
}
fbi->mmio_base = ioremap(r->start, r->end - r->start + 1);
@@ -1733,8 +1735,17 @@
* This makes sure that our colour bitfield
* descriptors are correctly initialised.
*/
- pxafb_check_var(&fbi->fb.var, &fbi->fb);
- pxafb_set_par(&fbi->fb);
+ ret = pxafb_check_var(&fbi->fb.var, &fbi->fb);
+ if (ret) {
+ dev_err(&dev->dev, "failed to get suitable mode\n");
+ goto failed_free_irq;
+ }
+
+ ret = pxafb_set_par(&fbi->fb);
+ if (ret) {
+ dev_err(&dev->dev, "Failed to set parameters\n");
+ goto failed_free_irq;
+ }
platform_set_drvdata(dev, fbi);
@@ -1742,7 +1753,7 @@
if (ret < 0) {
dev_err(&dev->dev,
"Failed to register framebuffer device: %d\n", ret);
- goto failed_free_irq;
+ goto failed_free_cmap;
}
#ifdef CONFIG_CPU_FREQ
@@ -1761,18 +1772,23 @@
return 0;
+failed_free_cmap:
+ if (fbi->fb.cmap.len)
+ fb_dealloc_cmap(&fbi->fb.cmap);
failed_free_irq:
free_irq(irq, fbi);
-failed_free_res:
- release_mem_region(r->start, r->end - r->start + 1);
-failed_free_io:
- iounmap(fbi->mmio_base);
failed_free_mem:
dma_free_writecombine(&dev->dev, fbi->map_size,
fbi->map_cpu, fbi->map_dma);
-failed:
+failed_free_io:
+ iounmap(fbi->mmio_base);
+failed_free_res:
+ release_mem_region(r->start, r->end - r->start + 1);
+failed_fbi:
+ clk_put(fbi->clk);
platform_set_drvdata(dev, NULL);
kfree(fbi);
+failed:
return ret;
}
@@ -1785,7 +1801,7 @@
},
};
-static int __devinit pxafb_init(void)
+static int __init pxafb_init(void)
{
if (pxafb_setup_options())
return -EINVAL;
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index 30469bf..d0674f1 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -1003,6 +1003,7 @@
static struct w100_pll_info xtal_16000000[] = {
/*freq M N_int N_fac tfgoal lock_time */
{ 72, 1, 8, 0, 0xe0, 48}, /* tfgoal guessed */
+ { 80, 1, 9, 0, 0xe0, 13}, /* tfgoal guessed */
{ 95, 1, 10, 7, 0xe0, 38}, /* tfgoal guessed */
{ 96, 1, 11, 0, 0xe0, 36}, /* tfgoal guessed */
{ 0, 0, 0, 0, 0, 0},
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 1386678..7084e7e 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -2,6 +2,9 @@
#include <linux/spinlock.h>
#include <linux/virtio_config.h>
+/* Unique numbering for virtio devices. */
+static unsigned int dev_index;
+
static ssize_t device_show(struct device *_d,
struct device_attribute *attr, char *buf)
{
@@ -121,9 +124,9 @@
if (err)
add_status(dev, VIRTIO_CONFIG_S_FAILED);
else {
- add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
/* They should never have set feature bits beyond 32 */
dev->config->set_features(dev, dev->features[0]);
+ add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
}
return err;
}
@@ -166,7 +169,10 @@
int err;
dev->dev.bus = &virtio_bus;
- sprintf(dev->dev.bus_id, "%u", dev->index);
+
+ /* Assign a unique device index and hence name. */
+ dev->index = dev_index++;
+ sprintf(dev->dev.bus_id, "virtio%u", dev->index);
/* We always start by resetting the device, in case a previous
* driver messed it up. This also tests that code path a little. */
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 27e9fc9..eae72363 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -78,9 +78,6 @@
.bus_id = "virtio-pci",
};
-/* Unique numbering for devices under the kvm root */
-static unsigned int dev_index;
-
/* Convert a generic virtio device to our structure */
static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev)
{
@@ -325,10 +322,6 @@
if (vp_dev == NULL)
return -ENOMEM;
- snprintf(vp_dev->vdev.dev.bus_id, BUS_ID_SIZE, "virtio%d", dev_index);
- vp_dev->vdev.index = dev_index;
- dev_index++;
-
vp_dev->vdev.dev.parent = &virtio_pci_root;
vp_dev->vdev.config = &virtio_pci_config_ops;
vp_dev->pci_dev = pci_dev;
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 937a49d..72bf8bc 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -227,7 +227,6 @@
struct vring_virtqueue *vq = to_vvq(_vq);
START_USE(vq);
- BUG_ON(!(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT));
/* We optimistically turn back on interrupts, then check if there was
* more to do. */
@@ -254,13 +253,6 @@
if (unlikely(vq->broken))
return IRQ_HANDLED;
- /* Other side may have missed us turning off the interrupt,
- * but we should preserve disable semantic for virtio users. */
- if (unlikely(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) {
- pr_debug("virtqueue interrupt after disable for %p\n", vq);
- return IRQ_HANDLED;
- }
-
pr_debug("virtqueue callback for %p (%p)\n", vq, vq->vq.callback);
if (vq->vq.callback)
vq->vq.callback(&vq->vq);
diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c
index f85b196..30d09cb 100644
--- a/drivers/watchdog/geodewdt.c
+++ b/drivers/watchdog/geodewdt.c
@@ -221,8 +221,7 @@
{
int ret, timer;
- timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY,
- MFGPT_DOMAIN_WORKING, THIS_MODULE);
+ timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING);
if (timer == -1) {
printk(KERN_ERR "geodewdt: No timers were available\n");
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 6a63535..eaa3f2a 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -140,49 +140,53 @@
};
MODULE_DEVICE_TABLE(pci, hpwdt_devices);
+extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs, unsigned long *pRomEntry);
+
#ifndef CONFIG_X86_64
/* --32 Bit Bios------------------------------------------------------------ */
#define HPWDT_ARCH 32
-static void asminline_call(struct cmn_registers *pi86Regs,
- unsigned long *pRomEntry)
-{
- asm("pushl %ebp \n\t"
- "movl %esp, %ebp \n\t"
- "pusha \n\t"
- "pushf \n\t"
- "push %es \n\t"
- "push %ds \n\t"
- "pop %es \n\t"
- "movl 8(%ebp),%eax \n\t"
- "movl 4(%eax),%ebx \n\t"
- "movl 8(%eax),%ecx \n\t"
- "movl 12(%eax),%edx \n\t"
- "movl 16(%eax),%esi \n\t"
- "movl 20(%eax),%edi \n\t"
- "movl (%eax),%eax \n\t"
- "push %cs \n\t"
- "call *12(%ebp) \n\t"
- "pushf \n\t"
- "pushl %eax \n\t"
- "movl 8(%ebp),%eax \n\t"
- "movl %ebx,4(%eax) \n\t"
- "movl %ecx,8(%eax) \n\t"
- "movl %edx,12(%eax) \n\t"
- "movl %esi,16(%eax) \n\t"
- "movl %edi,20(%eax) \n\t"
- "movw %ds,24(%eax) \n\t"
- "movw %es,26(%eax) \n\t"
- "popl %ebx \n\t"
- "movl %ebx,(%eax) \n\t"
- "popl %ebx \n\t"
- "movl %ebx,28(%eax) \n\t"
- "pop %es \n\t"
- "popf \n\t"
- "popa \n\t"
- "leave \n\t" "ret");
-}
+asm(".text \n\t"
+ ".align 4 \n"
+ "asminline_call: \n\t"
+ "pushl %ebp \n\t"
+ "movl %esp, %ebp \n\t"
+ "pusha \n\t"
+ "pushf \n\t"
+ "push %es \n\t"
+ "push %ds \n\t"
+ "pop %es \n\t"
+ "movl 8(%ebp),%eax \n\t"
+ "movl 4(%eax),%ebx \n\t"
+ "movl 8(%eax),%ecx \n\t"
+ "movl 12(%eax),%edx \n\t"
+ "movl 16(%eax),%esi \n\t"
+ "movl 20(%eax),%edi \n\t"
+ "movl (%eax),%eax \n\t"
+ "push %cs \n\t"
+ "call *12(%ebp) \n\t"
+ "pushf \n\t"
+ "pushl %eax \n\t"
+ "movl 8(%ebp),%eax \n\t"
+ "movl %ebx,4(%eax) \n\t"
+ "movl %ecx,8(%eax) \n\t"
+ "movl %edx,12(%eax) \n\t"
+ "movl %esi,16(%eax) \n\t"
+ "movl %edi,20(%eax) \n\t"
+ "movw %ds,24(%eax) \n\t"
+ "movw %es,26(%eax) \n\t"
+ "popl %ebx \n\t"
+ "movl %ebx,(%eax) \n\t"
+ "popl %ebx \n\t"
+ "movl %ebx,28(%eax) \n\t"
+ "pop %es \n\t"
+ "popf \n\t"
+ "popa \n\t"
+ "leave \n\t"
+ "ret \n\t"
+ ".previous");
+
/*
* cru_detect
@@ -333,43 +337,44 @@
#define HPWDT_ARCH 64
-static void asminline_call(struct cmn_registers *pi86Regs,
- unsigned long *pRomEntry)
-{
- asm("pushq %rbp \n\t"
- "movq %rsp, %rbp \n\t"
- "pushq %rax \n\t"
- "pushq %rbx \n\t"
- "pushq %rdx \n\t"
- "pushq %r12 \n\t"
- "pushq %r9 \n\t"
- "movq %rsi, %r12 \n\t"
- "movq %rdi, %r9 \n\t"
- "movl 4(%r9),%ebx \n\t"
- "movl 8(%r9),%ecx \n\t"
- "movl 12(%r9),%edx \n\t"
- "movl 16(%r9),%esi \n\t"
- "movl 20(%r9),%edi \n\t"
- "movl (%r9),%eax \n\t"
- "call *%r12 \n\t"
- "pushfq \n\t"
- "popq %r12 \n\t"
- "popfq \n\t"
- "movl %eax, (%r9) \n\t"
- "movl %ebx, 4(%r9) \n\t"
- "movl %ecx, 8(%r9) \n\t"
- "movl %edx, 12(%r9) \n\t"
- "movl %esi, 16(%r9) \n\t"
- "movl %edi, 20(%r9) \n\t"
- "movq %r12, %rax \n\t"
- "movl %eax, 28(%r9) \n\t"
- "popq %r9 \n\t"
- "popq %r12 \n\t"
- "popq %rdx \n\t"
- "popq %rbx \n\t"
- "popq %rax \n\t"
- "leave \n\t" "ret");
-}
+asm(".text \n\t"
+ ".align 4 \n"
+ "asminline_call: \n\t"
+ "pushq %rbp \n\t"
+ "movq %rsp, %rbp \n\t"
+ "pushq %rax \n\t"
+ "pushq %rbx \n\t"
+ "pushq %rdx \n\t"
+ "pushq %r12 \n\t"
+ "pushq %r9 \n\t"
+ "movq %rsi, %r12 \n\t"
+ "movq %rdi, %r9 \n\t"
+ "movl 4(%r9),%ebx \n\t"
+ "movl 8(%r9),%ecx \n\t"
+ "movl 12(%r9),%edx \n\t"
+ "movl 16(%r9),%esi \n\t"
+ "movl 20(%r9),%edi \n\t"
+ "movl (%r9),%eax \n\t"
+ "call *%r12 \n\t"
+ "pushfq \n\t"
+ "popq %r12 \n\t"
+ "popfq \n\t"
+ "movl %eax, (%r9) \n\t"
+ "movl %ebx, 4(%r9) \n\t"
+ "movl %ecx, 8(%r9) \n\t"
+ "movl %edx, 12(%r9) \n\t"
+ "movl %esi, 16(%r9) \n\t"
+ "movl %edi, 20(%r9) \n\t"
+ "movq %r12, %rax \n\t"
+ "movl %eax, 28(%r9) \n\t"
+ "popq %r9 \n\t"
+ "popq %r12 \n\t"
+ "popq %rdx \n\t"
+ "popq %rbx \n\t"
+ "popq %rax \n\t"
+ "leave \n\t"
+ "ret \n\t"
+ ".previous");
/*
* dmi_find_cru
@@ -418,20 +423,23 @@
static unsigned long rom_pl;
static int die_nmi_called;
- if (ulReason == DIE_NMI || ulReason == DIE_NMI_IPI) {
- spin_lock_irqsave(&rom_lock, rom_pl);
- if (!die_nmi_called)
- asminline_call(&cmn_regs, cru_rom_addr);
- die_nmi_called = 1;
- spin_unlock_irqrestore(&rom_lock, rom_pl);
- if (cmn_regs.u1.ral != 0) {
- panic("An NMI occurred, please see the Integrated "
- "Management Log for details.\n");
- }
+ if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
+ return NOTIFY_OK;
+
+ spin_lock_irqsave(&rom_lock, rom_pl);
+ if (!die_nmi_called)
+ asminline_call(&cmn_regs, cru_rom_addr);
+ die_nmi_called = 1;
+ spin_unlock_irqrestore(&rom_lock, rom_pl);
+ if (cmn_regs.u1.ral == 0) {
+ printk(KERN_WARNING "hpwdt: An NMI occurred, "
+ "but unable to determine source.\n");
+ } else {
+ panic("An NMI occurred, please see the Integrated "
+ "Management Log for details.\n");
}
- die_nmi_called = 0;
- return NOTIFY_DONE;
+ return NOTIFY_STOP;
}
/*
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 4f0f22b..76e5b73 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -529,7 +529,7 @@
#ifndef CONFIG_X86 /* No need for a barrier -- XCHG is a barrier on x86. */
/* Clear master flag /before/ clearing selector flag. */
- rmb();
+ wmb();
#endif
pending_words = xchg(&vcpu_info->evtchn_pending_sel, 0);
while (pending_words != 0) {
diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c
index 0f86b0f..9678b3e 100644
--- a/drivers/xen/xenbus/xenbus_client.c
+++ b/drivers/xen/xenbus/xenbus_client.c
@@ -117,7 +117,7 @@
char *path;
va_start(ap, pathfmt);
- path = kvasprintf(GFP_KERNEL, pathfmt, ap);
+ path = kvasprintf(GFP_NOIO | __GFP_HIGH, pathfmt, ap);
va_end(ap);
if (!path) {
diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
index 227d53b1..7f2f91c 100644
--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -283,9 +283,9 @@
char *buffer;
if (strlen(name) == 0)
- buffer = kasprintf(GFP_KERNEL, "%s", dir);
+ buffer = kasprintf(GFP_NOIO | __GFP_HIGH, "%s", dir);
else
- buffer = kasprintf(GFP_KERNEL, "%s/%s", dir, name);
+ buffer = kasprintf(GFP_NOIO | __GFP_HIGH, "%s/%s", dir, name);
return (!buffer) ? ERR_PTR(-ENOMEM) : buffer;
}
@@ -297,7 +297,7 @@
*num = count_strings(strings, len);
/* Transfer to one big alloc for easy freeing. */
- ret = kmalloc(*num * sizeof(char *) + len, GFP_KERNEL);
+ ret = kmalloc(*num * sizeof(char *) + len, GFP_NOIO | __GFP_HIGH);
if (!ret) {
kfree(strings);
return ERR_PTR(-ENOMEM);
@@ -751,7 +751,7 @@
}
- msg = kmalloc(sizeof(*msg), GFP_KERNEL);
+ msg = kmalloc(sizeof(*msg), GFP_NOIO | __GFP_HIGH);
if (msg == NULL) {
err = -ENOMEM;
goto out;
@@ -763,7 +763,7 @@
goto out;
}
- body = kmalloc(msg->hdr.len + 1, GFP_KERNEL);
+ body = kmalloc(msg->hdr.len + 1, GFP_NOIO | __GFP_HIGH);
if (body == NULL) {
kfree(msg);
err = -ENOMEM;
diff --git a/fs/9p/v9fs_vfs.h b/fs/9p/v9fs_vfs.h
index fd01d90..57997fa 100644
--- a/fs/9p/v9fs_vfs.h
+++ b/fs/9p/v9fs_vfs.h
@@ -51,4 +51,4 @@
int v9fs_file_open(struct inode *inode, struct file *file);
void v9fs_inode2stat(struct inode *inode, struct p9_stat *stat);
void v9fs_dentry_release(struct dentry *);
-int v9fs_uflags2omode(int uflags);
+int v9fs_uflags2omode(int uflags, int extended);
diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index 0d55aff..52944d2 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -59,7 +59,7 @@
P9_DPRINTK(P9_DEBUG_VFS, "inode: %p file: %p \n", inode, file);
v9ses = v9fs_inode2v9ses(inode);
- omode = v9fs_uflags2omode(file->f_flags);
+ omode = v9fs_uflags2omode(file->f_flags, v9fs_extended(v9ses));
fid = file->private_data;
if (!fid) {
fid = v9fs_fid_clone(file->f_path.dentry);
@@ -75,6 +75,8 @@
inode->i_size = 0;
inode->i_blocks = 0;
}
+ if ((file->f_flags & O_APPEND) && (!v9fs_extended(v9ses)))
+ generic_file_llseek(file, 0, SEEK_END);
}
file->private_data = fid;
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 40fa807..c95295c 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -132,10 +132,10 @@
/**
* v9fs_uflags2omode- convert posix open flags to plan 9 mode bits
* @uflags: flags to convert
- *
+ * @extended: if .u extensions are active
*/
-int v9fs_uflags2omode(int uflags)
+int v9fs_uflags2omode(int uflags, int extended)
{
int ret;
@@ -155,14 +155,16 @@
break;
}
- if (uflags & O_EXCL)
- ret |= P9_OEXCL;
-
if (uflags & O_TRUNC)
ret |= P9_OTRUNC;
- if (uflags & O_APPEND)
- ret |= P9_OAPPEND;
+ if (extended) {
+ if (uflags & O_EXCL)
+ ret |= P9_OEXCL;
+
+ if (uflags & O_APPEND)
+ ret |= P9_OAPPEND;
+ }
return ret;
}
@@ -506,7 +508,7 @@
flags = O_RDWR;
fid = v9fs_create(v9ses, dir, dentry, NULL, perm,
- v9fs_uflags2omode(flags));
+ v9fs_uflags2omode(flags, v9fs_extended(v9ses)));
if (IS_ERR(fid)) {
err = PTR_ERR(fid);
fid = NULL;
diff --git a/fs/Kconfig b/fs/Kconfig
index cf12c40..2694648 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -830,7 +830,7 @@
from the project web site.
For more information see <file:Documentation/filesystems/ntfs.txt>
- and <http://linux-ntfs.sourceforge.net/>.
+ and <http://www.linux-ntfs.org/>.
To compile this file system support as a module, choose M here: the
module will be called ntfs.
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 55e8ee1..3263084 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -42,7 +42,7 @@
config BINFMT_FLAT
bool "Kernel support for flat binaries"
- depends on !MMU
+ depends on !MMU && (!FRV || BROKEN)
help
Support uClinux FLAT format binaries.
diff --git a/fs/Makefile b/fs/Makefile
index 1e7a11b..277b079 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -19,6 +19,7 @@
obj-y += no-block.o
endif
+obj-$(CONFIG_BLK_DEV_INTEGRITY) += bio-integrity.o
obj-$(CONFIG_INOTIFY) += inotify.o
obj-$(CONFIG_INOTIFY_USER) += inotify_user.o
obj-$(CONFIG_EPOLL) += eventpoll.o
diff --git a/fs/afs/callback.c b/fs/afs/callback.c
index a78d5b2..587ef51 100644
--- a/fs/afs/callback.c
+++ b/fs/afs/callback.c
@@ -8,7 +8,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Authors: David Woodhouse <dwmw2@cambridge.redhat.com>
+ * Authors: David Woodhouse <dwmw2@infradead.org>
* David Howells <dhowells@redhat.com>
*
*/
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 08db82e..bb47217 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -8,7 +8,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Authors: David Woodhouse <dwmw2@cambridge.redhat.com>
+ * Authors: David Woodhouse <dwmw2@infradead.org>
* David Howells <dhowells@redhat.com>
*
*/
diff --git a/fs/afs/super.c b/fs/afs/super.c
index 4b572b8..7e3faee 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -10,7 +10,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Authors: David Howells <dhowells@redhat.com>
- * David Woodhouse <dwmw2@redhat.com>
+ * David Woodhouse <dwmw2@infradead.org>
*
*/
diff --git a/fs/aio.c b/fs/aio.c
index b5253e7..0fb3117 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -591,10 +591,6 @@
atomic_inc(&mm->mm_count);
tsk->mm = mm;
tsk->active_mm = mm;
- /*
- * Note that on UML this *requires* PF_BORROWED_MM to be set, otherwise
- * it won't work. Update it accordingly if you change it here
- */
switch_mm(active_mm, mm, tsk);
task_unlock(tsk);
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 0fa95b1..d48ff5f3 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -16,7 +16,6 @@
#include <linux/time.h>
#include <linux/mm.h>
#include <linux/mman.h>
-#include <linux/a.out.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/binfmts.h>
@@ -548,7 +547,6 @@
struct {
struct elfhdr elf_ex;
struct elfhdr interp_elf_ex;
- struct exec interp_ex;
} *loc;
loc = kmalloc(sizeof(*loc), GFP_KERNEL);
@@ -680,7 +678,6 @@
}
/* Get the exec headers */
- loc->interp_ex = *((struct exec *)bprm->buf);
loc->interp_elf_ex = *((struct elfhdr *)bprm->buf);
break;
}
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index ddd35d8..d051a32 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -390,7 +390,7 @@
}
/* expand the stack mapping to use up the entire allocation granule */
- fullsize = ksize((char *) current->mm->start_brk);
+ fullsize = kobjsize((char *) current->mm->start_brk);
if (!IS_ERR_VALUE(do_mremap(current->mm->start_brk, stack_size,
fullsize, 0, 0)))
stack_size = fullsize;
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 3b40d45..2cb1acd 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -548,7 +548,7 @@
PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 0);
/* Remap to use all availabe slack region space */
if (realdatastart && (realdatastart < (unsigned long)-4096)) {
- reallen = ksize((void *)realdatastart);
+ reallen = kobjsize((void *)realdatastart);
if (reallen > len) {
realdatastart = do_mremap(realdatastart, len,
reallen, MREMAP_FIXED, realdatastart);
@@ -600,7 +600,7 @@
PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0);
/* Remap to use all availabe slack region space */
if (textpos && (textpos < (unsigned long) -4096)) {
- reallen = ksize((void *)textpos);
+ reallen = kobjsize((void *)textpos);
if (reallen > len) {
textpos = do_mremap(textpos, len, reallen,
MREMAP_FIXED, textpos);
@@ -683,7 +683,7 @@
*/
current->mm->start_brk = datapos + data_len + bss_len;
current->mm->brk = (current->mm->start_brk + 3) & ~3;
- current->mm->context.end_brk = memp + ksize((void *) memp) - stack_len;
+ current->mm->context.end_brk = memp + kobjsize((void *) memp) - stack_len;
}
if (flags & FLAT_FLAG_KTRACE)
@@ -790,7 +790,7 @@
/* zero the BSS, BRK and stack areas */
memset((void*)(datapos + data_len), 0, bss_len +
- (memp + ksize((void *) memp) - stack_len - /* end brk */
+ (memp + kobjsize((void *) memp) - stack_len - /* end brk */
libinfo->lib_list[id].start_brk) + /* start brk */
stack_len);
diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c
new file mode 100644
index 0000000..63e2ee6
--- /dev/null
+++ b/fs/bio-integrity.c
@@ -0,0 +1,719 @@
+/*
+ * bio-integrity.c - bio data integrity extensions
+ *
+ * Copyright (C) 2007, 2008 Oracle Corporation
+ * Written by: Martin K. Petersen <martin.petersen@oracle.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
+ * USA.
+ *
+ */
+
+#include <linux/blkdev.h>
+#include <linux/mempool.h>
+#include <linux/bio.h>
+#include <linux/workqueue.h>
+
+static struct kmem_cache *bio_integrity_slab __read_mostly;
+static struct workqueue_struct *kintegrityd_wq;
+
+/**
+ * bio_integrity_alloc_bioset - Allocate integrity payload and attach it to bio
+ * @bio: bio to attach integrity metadata to
+ * @gfp_mask: Memory allocation mask
+ * @nr_vecs: Number of integrity metadata scatter-gather elements
+ * @bs: bio_set to allocate from
+ *
+ * Description: This function prepares a bio for attaching integrity
+ * metadata. nr_vecs specifies the maximum number of pages containing
+ * integrity metadata that can be attached.
+ */
+struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *bio,
+ gfp_t gfp_mask,
+ unsigned int nr_vecs,
+ struct bio_set *bs)
+{
+ struct bio_integrity_payload *bip;
+ struct bio_vec *iv;
+ unsigned long idx;
+
+ BUG_ON(bio == NULL);
+
+ bip = mempool_alloc(bs->bio_integrity_pool, gfp_mask);
+ if (unlikely(bip == NULL)) {
+ printk(KERN_ERR "%s: could not alloc bip\n", __func__);
+ return NULL;
+ }
+
+ memset(bip, 0, sizeof(*bip));
+
+ iv = bvec_alloc_bs(gfp_mask, nr_vecs, &idx, bs);
+ if (unlikely(iv == NULL)) {
+ printk(KERN_ERR "%s: could not alloc bip_vec\n", __func__);
+ mempool_free(bip, bs->bio_integrity_pool);
+ return NULL;
+ }
+
+ bip->bip_pool = idx;
+ bip->bip_vec = iv;
+ bip->bip_bio = bio;
+ bio->bi_integrity = bip;
+
+ return bip;
+}
+EXPORT_SYMBOL(bio_integrity_alloc_bioset);
+
+/**
+ * bio_integrity_alloc - Allocate integrity payload and attach it to bio
+ * @bio: bio to attach integrity metadata to
+ * @gfp_mask: Memory allocation mask
+ * @nr_vecs: Number of integrity metadata scatter-gather elements
+ *
+ * Description: This function prepares a bio for attaching integrity
+ * metadata. nr_vecs specifies the maximum number of pages containing
+ * integrity metadata that can be attached.
+ */
+struct bio_integrity_payload *bio_integrity_alloc(struct bio *bio,
+ gfp_t gfp_mask,
+ unsigned int nr_vecs)
+{
+ return bio_integrity_alloc_bioset(bio, gfp_mask, nr_vecs, fs_bio_set);
+}
+EXPORT_SYMBOL(bio_integrity_alloc);
+
+/**
+ * bio_integrity_free - Free bio integrity payload
+ * @bio: bio containing bip to be freed
+ * @bs: bio_set this bio was allocated from
+ *
+ * Description: Used to free the integrity portion of a bio. Usually
+ * called from bio_free().
+ */
+void bio_integrity_free(struct bio *bio, struct bio_set *bs)
+{
+ struct bio_integrity_payload *bip = bio->bi_integrity;
+
+ BUG_ON(bip == NULL);
+
+ /* A cloned bio doesn't own the integrity metadata */
+ if (!bio_flagged(bio, BIO_CLONED) && bip->bip_buf != NULL)
+ kfree(bip->bip_buf);
+
+ mempool_free(bip->bip_vec, bs->bvec_pools[bip->bip_pool]);
+ mempool_free(bip, bs->bio_integrity_pool);
+
+ bio->bi_integrity = NULL;
+}
+EXPORT_SYMBOL(bio_integrity_free);
+
+/**
+ * bio_integrity_add_page - Attach integrity metadata
+ * @bio: bio to update
+ * @page: page containing integrity metadata
+ * @len: number of bytes of integrity metadata in page
+ * @offset: start offset within page
+ *
+ * Description: Attach a page containing integrity metadata to bio.
+ */
+int bio_integrity_add_page(struct bio *bio, struct page *page,
+ unsigned int len, unsigned int offset)
+{
+ struct bio_integrity_payload *bip = bio->bi_integrity;
+ struct bio_vec *iv;
+
+ if (bip->bip_vcnt >= bvec_nr_vecs(bip->bip_pool)) {
+ printk(KERN_ERR "%s: bip_vec full\n", __func__);
+ return 0;
+ }
+
+ iv = bip_vec_idx(bip, bip->bip_vcnt);
+ BUG_ON(iv == NULL);
+ BUG_ON(iv->bv_page != NULL);
+
+ iv->bv_page = page;
+ iv->bv_len = len;
+ iv->bv_offset = offset;
+ bip->bip_vcnt++;
+
+ return len;
+}
+EXPORT_SYMBOL(bio_integrity_add_page);
+
+/**
+ * bio_integrity_enabled - Check whether integrity can be passed
+ * @bio: bio to check
+ *
+ * Description: Determines whether bio_integrity_prep() can be called
+ * on this bio or not. bio data direction and target device must be
+ * set prior to calling. The functions honors the write_generate and
+ * read_verify flags in sysfs.
+ */
+int bio_integrity_enabled(struct bio *bio)
+{
+ /* Already protected? */
+ if (bio_integrity(bio))
+ return 0;
+
+ return bdev_integrity_enabled(bio->bi_bdev, bio_data_dir(bio));
+}
+EXPORT_SYMBOL(bio_integrity_enabled);
+
+/**
+ * bio_integrity_hw_sectors - Convert 512b sectors to hardware ditto
+ * @bi: blk_integrity profile for device
+ * @sectors: Number of 512 sectors to convert
+ *
+ * Description: The block layer calculates everything in 512 byte
+ * sectors but integrity metadata is done in terms of the hardware
+ * sector size of the storage device. Convert the block layer sectors
+ * to physical sectors.
+ */
+static inline unsigned int bio_integrity_hw_sectors(struct blk_integrity *bi,
+ unsigned int sectors)
+{
+ /* At this point there are only 512b or 4096b DIF/EPP devices */
+ if (bi->sector_size == 4096)
+ return sectors >>= 3;
+
+ return sectors;
+}
+
+/**
+ * bio_integrity_tag_size - Retrieve integrity tag space
+ * @bio: bio to inspect
+ *
+ * Description: Returns the maximum number of tag bytes that can be
+ * attached to this bio. Filesystems can use this to determine how
+ * much metadata to attach to an I/O.
+ */
+unsigned int bio_integrity_tag_size(struct bio *bio)
+{
+ struct blk_integrity *bi = bdev_get_integrity(bio->bi_bdev);
+
+ BUG_ON(bio->bi_size == 0);
+
+ return bi->tag_size * (bio->bi_size / bi->sector_size);
+}
+EXPORT_SYMBOL(bio_integrity_tag_size);
+
+int bio_integrity_tag(struct bio *bio, void *tag_buf, unsigned int len, int set)
+{
+ struct bio_integrity_payload *bip = bio->bi_integrity;
+ struct blk_integrity *bi = bdev_get_integrity(bio->bi_bdev);
+ unsigned int nr_sectors;
+
+ BUG_ON(bip->bip_buf == NULL);
+
+ if (bi->tag_size == 0)
+ return -1;
+
+ nr_sectors = bio_integrity_hw_sectors(bi,
+ DIV_ROUND_UP(len, bi->tag_size));
+
+ if (nr_sectors * bi->tuple_size > bip->bip_size) {
+ printk(KERN_ERR "%s: tag too big for bio: %u > %u\n",
+ __func__, nr_sectors * bi->tuple_size, bip->bip_size);
+ return -1;
+ }
+
+ if (set)
+ bi->set_tag_fn(bip->bip_buf, tag_buf, nr_sectors);
+ else
+ bi->get_tag_fn(bip->bip_buf, tag_buf, nr_sectors);
+
+ return 0;
+}
+
+/**
+ * bio_integrity_set_tag - Attach a tag buffer to a bio
+ * @bio: bio to attach buffer to
+ * @tag_buf: Pointer to a buffer containing tag data
+ * @len: Length of the included buffer
+ *
+ * Description: Use this function to tag a bio by leveraging the extra
+ * space provided by devices formatted with integrity protection. The
+ * size of the integrity buffer must be <= to the size reported by
+ * bio_integrity_tag_size().
+ */
+int bio_integrity_set_tag(struct bio *bio, void *tag_buf, unsigned int len)
+{
+ BUG_ON(bio_data_dir(bio) != WRITE);
+
+ return bio_integrity_tag(bio, tag_buf, len, 1);
+}
+EXPORT_SYMBOL(bio_integrity_set_tag);
+
+/**
+ * bio_integrity_get_tag - Retrieve a tag buffer from a bio
+ * @bio: bio to retrieve buffer from
+ * @tag_buf: Pointer to a buffer for the tag data
+ * @len: Length of the target buffer
+ *
+ * Description: Use this function to retrieve the tag buffer from a
+ * completed I/O. The size of the integrity buffer must be <= to the
+ * size reported by bio_integrity_tag_size().
+ */
+int bio_integrity_get_tag(struct bio *bio, void *tag_buf, unsigned int len)
+{
+ BUG_ON(bio_data_dir(bio) != READ);
+
+ return bio_integrity_tag(bio, tag_buf, len, 0);
+}
+EXPORT_SYMBOL(bio_integrity_get_tag);
+
+/**
+ * bio_integrity_generate - Generate integrity metadata for a bio
+ * @bio: bio to generate integrity metadata for
+ *
+ * Description: Generates integrity metadata for a bio by calling the
+ * block device's generation callback function. The bio must have a
+ * bip attached with enough room to accommodate the generated
+ * integrity metadata.
+ */
+static void bio_integrity_generate(struct bio *bio)
+{
+ struct blk_integrity *bi = bdev_get_integrity(bio->bi_bdev);
+ struct blk_integrity_exchg bix;
+ struct bio_vec *bv;
+ sector_t sector = bio->bi_sector;
+ unsigned int i, sectors, total;
+ void *prot_buf = bio->bi_integrity->bip_buf;
+
+ total = 0;
+ bix.disk_name = bio->bi_bdev->bd_disk->disk_name;
+ bix.sector_size = bi->sector_size;
+
+ bio_for_each_segment(bv, bio, i) {
+ void *kaddr = kmap_atomic(bv->bv_page, KM_USER0);
+ bix.data_buf = kaddr + bv->bv_offset;
+ bix.data_size = bv->bv_len;
+ bix.prot_buf = prot_buf;
+ bix.sector = sector;
+
+ bi->generate_fn(&bix);
+
+ sectors = bv->bv_len / bi->sector_size;
+ sector += sectors;
+ prot_buf += sectors * bi->tuple_size;
+ total += sectors * bi->tuple_size;
+ BUG_ON(total > bio->bi_integrity->bip_size);
+
+ kunmap_atomic(kaddr, KM_USER0);
+ }
+}
+
+/**
+ * bio_integrity_prep - Prepare bio for integrity I/O
+ * @bio: bio to prepare
+ *
+ * Description: Allocates a buffer for integrity metadata, maps the
+ * pages and attaches them to a bio. The bio must have data
+ * direction, target device and start sector set priot to calling. In
+ * the WRITE case, integrity metadata will be generated using the
+ * block device's integrity function. In the READ case, the buffer
+ * will be prepared for DMA and a suitable end_io handler set up.
+ */
+int bio_integrity_prep(struct bio *bio)
+{
+ struct bio_integrity_payload *bip;
+ struct blk_integrity *bi;
+ struct request_queue *q;
+ void *buf;
+ unsigned long start, end;
+ unsigned int len, nr_pages;
+ unsigned int bytes, offset, i;
+ unsigned int sectors;
+
+ bi = bdev_get_integrity(bio->bi_bdev);
+ q = bdev_get_queue(bio->bi_bdev);
+ BUG_ON(bi == NULL);
+ BUG_ON(bio_integrity(bio));
+
+ sectors = bio_integrity_hw_sectors(bi, bio_sectors(bio));
+
+ /* Allocate kernel buffer for protection data */
+ len = sectors * blk_integrity_tuple_size(bi);
+ buf = kmalloc(len, GFP_NOIO | __GFP_NOFAIL | q->bounce_gfp);
+ if (unlikely(buf == NULL)) {
+ printk(KERN_ERR "could not allocate integrity buffer\n");
+ return -EIO;
+ }
+
+ end = (((unsigned long) buf) + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
+ start = ((unsigned long) buf) >> PAGE_SHIFT;
+ nr_pages = end - start;
+
+ /* Allocate bio integrity payload and integrity vectors */
+ bip = bio_integrity_alloc(bio, GFP_NOIO, nr_pages);
+ if (unlikely(bip == NULL)) {
+ printk(KERN_ERR "could not allocate data integrity bioset\n");
+ kfree(buf);
+ return -EIO;
+ }
+
+ bip->bip_buf = buf;
+ bip->bip_size = len;
+ bip->bip_sector = bio->bi_sector;
+
+ /* Map it */
+ offset = offset_in_page(buf);
+ for (i = 0 ; i < nr_pages ; i++) {
+ int ret;
+ bytes = PAGE_SIZE - offset;
+
+ if (len <= 0)
+ break;
+
+ if (bytes > len)
+ bytes = len;
+
+ ret = bio_integrity_add_page(bio, virt_to_page(buf),
+ bytes, offset);
+
+ if (ret == 0)
+ return 0;
+
+ if (ret < bytes)
+ break;
+
+ buf += bytes;
+ len -= bytes;
+ offset = 0;
+ }
+
+ /* Install custom I/O completion handler if read verify is enabled */
+ if (bio_data_dir(bio) == READ) {
+ bip->bip_end_io = bio->bi_end_io;
+ bio->bi_end_io = bio_integrity_endio;
+ }
+
+ /* Auto-generate integrity metadata if this is a write */
+ if (bio_data_dir(bio) == WRITE)
+ bio_integrity_generate(bio);
+
+ return 0;
+}
+EXPORT_SYMBOL(bio_integrity_prep);
+
+/**
+ * bio_integrity_verify - Verify integrity metadata for a bio
+ * @bio: bio to verify
+ *
+ * Description: This function is called to verify the integrity of a
+ * bio. The data in the bio io_vec is compared to the integrity
+ * metadata returned by the HBA.
+ */
+static int bio_integrity_verify(struct bio *bio)
+{
+ struct blk_integrity *bi = bdev_get_integrity(bio->bi_bdev);
+ struct blk_integrity_exchg bix;
+ struct bio_vec *bv;
+ sector_t sector = bio->bi_integrity->bip_sector;
+ unsigned int i, sectors, total, ret;
+ void *prot_buf = bio->bi_integrity->bip_buf;
+
+ ret = total = 0;
+ bix.disk_name = bio->bi_bdev->bd_disk->disk_name;
+ bix.sector_size = bi->sector_size;
+
+ bio_for_each_segment(bv, bio, i) {
+ void *kaddr = kmap_atomic(bv->bv_page, KM_USER0);
+ bix.data_buf = kaddr + bv->bv_offset;
+ bix.data_size = bv->bv_len;
+ bix.prot_buf = prot_buf;
+ bix.sector = sector;
+
+ ret = bi->verify_fn(&bix);
+
+ if (ret) {
+ kunmap_atomic(kaddr, KM_USER0);
+ break;
+ }
+
+ sectors = bv->bv_len / bi->sector_size;
+ sector += sectors;
+ prot_buf += sectors * bi->tuple_size;
+ total += sectors * bi->tuple_size;
+ BUG_ON(total > bio->bi_integrity->bip_size);
+
+ kunmap_atomic(kaddr, KM_USER0);
+ }
+
+ return ret;
+}
+
+/**
+ * bio_integrity_verify_fn - Integrity I/O completion worker
+ * @work: Work struct stored in bio to be verified
+ *
+ * Description: This workqueue function is called to complete a READ
+ * request. The function verifies the transferred integrity metadata
+ * and then calls the original bio end_io function.
+ */
+static void bio_integrity_verify_fn(struct work_struct *work)
+{
+ struct bio_integrity_payload *bip =
+ container_of(work, struct bio_integrity_payload, bip_work);
+ struct bio *bio = bip->bip_bio;
+ int error = bip->bip_error;
+
+ if (bio_integrity_verify(bio)) {
+ clear_bit(BIO_UPTODATE, &bio->bi_flags);
+ error = -EIO;
+ }
+
+ /* Restore original bio completion handler */
+ bio->bi_end_io = bip->bip_end_io;
+
+ if (bio->bi_end_io)
+ bio->bi_end_io(bio, error);
+}
+
+/**
+ * bio_integrity_endio - Integrity I/O completion function
+ * @bio: Protected bio
+ * @error: Pointer to errno
+ *
+ * Description: Completion for integrity I/O
+ *
+ * Normally I/O completion is done in interrupt context. However,
+ * verifying I/O integrity is a time-consuming task which must be run
+ * in process context. This function postpones completion
+ * accordingly.
+ */
+void bio_integrity_endio(struct bio *bio, int error)
+{
+ struct bio_integrity_payload *bip = bio->bi_integrity;
+
+ BUG_ON(bip->bip_bio != bio);
+
+ bip->bip_error = error;
+ INIT_WORK(&bip->bip_work, bio_integrity_verify_fn);
+ queue_work(kintegrityd_wq, &bip->bip_work);
+}
+EXPORT_SYMBOL(bio_integrity_endio);
+
+/**
+ * bio_integrity_mark_head - Advance bip_vec skip bytes
+ * @bip: Integrity vector to advance
+ * @skip: Number of bytes to advance it
+ */
+void bio_integrity_mark_head(struct bio_integrity_payload *bip,
+ unsigned int skip)
+{
+ struct bio_vec *iv;
+ unsigned int i;
+
+ bip_for_each_vec(iv, bip, i) {
+ if (skip == 0) {
+ bip->bip_idx = i;
+ return;
+ } else if (skip >= iv->bv_len) {
+ skip -= iv->bv_len;
+ } else { /* skip < iv->bv_len) */
+ iv->bv_offset += skip;
+ iv->bv_len -= skip;
+ bip->bip_idx = i;
+ return;
+ }
+ }
+}
+
+/**
+ * bio_integrity_mark_tail - Truncate bip_vec to be len bytes long
+ * @bip: Integrity vector to truncate
+ * @len: New length of integrity vector
+ */
+void bio_integrity_mark_tail(struct bio_integrity_payload *bip,
+ unsigned int len)
+{
+ struct bio_vec *iv;
+ unsigned int i;
+
+ bip_for_each_vec(iv, bip, i) {
+ if (len == 0) {
+ bip->bip_vcnt = i;
+ return;
+ } else if (len >= iv->bv_len) {
+ len -= iv->bv_len;
+ } else { /* len < iv->bv_len) */
+ iv->bv_len = len;
+ len = 0;
+ }
+ }
+}
+
+/**
+ * bio_integrity_advance - Advance integrity vector
+ * @bio: bio whose integrity vector to update
+ * @bytes_done: number of data bytes that have been completed
+ *
+ * Description: This function calculates how many integrity bytes the
+ * number of completed data bytes correspond to and advances the
+ * integrity vector accordingly.
+ */
+void bio_integrity_advance(struct bio *bio, unsigned int bytes_done)
+{
+ struct bio_integrity_payload *bip = bio->bi_integrity;
+ struct blk_integrity *bi = bdev_get_integrity(bio->bi_bdev);
+ unsigned int nr_sectors;
+
+ BUG_ON(bip == NULL);
+ BUG_ON(bi == NULL);
+
+ nr_sectors = bio_integrity_hw_sectors(bi, bytes_done >> 9);
+ bio_integrity_mark_head(bip, nr_sectors * bi->tuple_size);
+}
+EXPORT_SYMBOL(bio_integrity_advance);
+
+/**
+ * bio_integrity_trim - Trim integrity vector
+ * @bio: bio whose integrity vector to update
+ * @offset: offset to first data sector
+ * @sectors: number of data sectors
+ *
+ * Description: Used to trim the integrity vector in a cloned bio.
+ * The ivec will be advanced corresponding to 'offset' data sectors
+ * and the length will be truncated corresponding to 'len' data
+ * sectors.
+ */
+void bio_integrity_trim(struct bio *bio, unsigned int offset,
+ unsigned int sectors)
+{
+ struct bio_integrity_payload *bip = bio->bi_integrity;
+ struct blk_integrity *bi = bdev_get_integrity(bio->bi_bdev);
+ unsigned int nr_sectors;
+
+ BUG_ON(bip == NULL);
+ BUG_ON(bi == NULL);
+ BUG_ON(!bio_flagged(bio, BIO_CLONED));
+
+ nr_sectors = bio_integrity_hw_sectors(bi, sectors);
+ bip->bip_sector = bip->bip_sector + offset;
+ bio_integrity_mark_head(bip, offset * bi->tuple_size);
+ bio_integrity_mark_tail(bip, sectors * bi->tuple_size);
+}
+EXPORT_SYMBOL(bio_integrity_trim);
+
+/**
+ * bio_integrity_split - Split integrity metadata
+ * @bio: Protected bio
+ * @bp: Resulting bio_pair
+ * @sectors: Offset
+ *
+ * Description: Splits an integrity page into a bio_pair.
+ */
+void bio_integrity_split(struct bio *bio, struct bio_pair *bp, int sectors)
+{
+ struct blk_integrity *bi;
+ struct bio_integrity_payload *bip = bio->bi_integrity;
+ unsigned int nr_sectors;
+
+ if (bio_integrity(bio) == 0)
+ return;
+
+ bi = bdev_get_integrity(bio->bi_bdev);
+ BUG_ON(bi == NULL);
+ BUG_ON(bip->bip_vcnt != 1);
+
+ nr_sectors = bio_integrity_hw_sectors(bi, sectors);
+
+ bp->bio1.bi_integrity = &bp->bip1;
+ bp->bio2.bi_integrity = &bp->bip2;
+
+ bp->iv1 = bip->bip_vec[0];
+ bp->iv2 = bip->bip_vec[0];
+
+ bp->bip1.bip_vec = &bp->iv1;
+ bp->bip2.bip_vec = &bp->iv2;
+
+ bp->iv1.bv_len = sectors * bi->tuple_size;
+ bp->iv2.bv_offset += sectors * bi->tuple_size;
+ bp->iv2.bv_len -= sectors * bi->tuple_size;
+
+ bp->bip1.bip_sector = bio->bi_integrity->bip_sector;
+ bp->bip2.bip_sector = bio->bi_integrity->bip_sector + nr_sectors;
+
+ bp->bip1.bip_vcnt = bp->bip2.bip_vcnt = 1;
+ bp->bip1.bip_idx = bp->bip2.bip_idx = 0;
+}
+EXPORT_SYMBOL(bio_integrity_split);
+
+/**
+ * bio_integrity_clone - Callback for cloning bios with integrity metadata
+ * @bio: New bio
+ * @bio_src: Original bio
+ * @bs: bio_set to allocate bip from
+ *
+ * Description: Called to allocate a bip when cloning a bio
+ */
+int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
+ struct bio_set *bs)
+{
+ struct bio_integrity_payload *bip_src = bio_src->bi_integrity;
+ struct bio_integrity_payload *bip;
+
+ BUG_ON(bip_src == NULL);
+
+ bip = bio_integrity_alloc_bioset(bio, GFP_NOIO, bip_src->bip_vcnt, bs);
+
+ if (bip == NULL)
+ return -EIO;
+
+ memcpy(bip->bip_vec, bip_src->bip_vec,
+ bip_src->bip_vcnt * sizeof(struct bio_vec));
+
+ bip->bip_sector = bip_src->bip_sector;
+ bip->bip_vcnt = bip_src->bip_vcnt;
+ bip->bip_idx = bip_src->bip_idx;
+
+ return 0;
+}
+EXPORT_SYMBOL(bio_integrity_clone);
+
+int bioset_integrity_create(struct bio_set *bs, int pool_size)
+{
+ bs->bio_integrity_pool = mempool_create_slab_pool(pool_size,
+ bio_integrity_slab);
+ if (!bs->bio_integrity_pool)
+ return -1;
+
+ return 0;
+}
+EXPORT_SYMBOL(bioset_integrity_create);
+
+void bioset_integrity_free(struct bio_set *bs)
+{
+ if (bs->bio_integrity_pool)
+ mempool_destroy(bs->bio_integrity_pool);
+}
+EXPORT_SYMBOL(bioset_integrity_free);
+
+void __init bio_integrity_init_slab(void)
+{
+ bio_integrity_slab = KMEM_CACHE(bio_integrity_payload,
+ SLAB_HWCACHE_ALIGN|SLAB_PANIC);
+}
+EXPORT_SYMBOL(bio_integrity_init_slab);
+
+static int __init integrity_init(void)
+{
+ kintegrityd_wq = create_workqueue("kintegrityd");
+
+ if (!kintegrityd_wq)
+ panic("Failed to create kintegrityd\n");
+
+ return 0;
+}
+subsys_initcall(integrity_init);
diff --git a/fs/bio.c b/fs/bio.c
index 7856257..88322b0 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -28,25 +28,10 @@
#include <linux/blktrace_api.h>
#include <scsi/sg.h> /* for struct sg_iovec */
-#define BIO_POOL_SIZE 2
-
static struct kmem_cache *bio_slab __read_mostly;
-#define BIOVEC_NR_POOLS 6
-
-/*
- * a small number of entries is fine, not going to be performance critical.
- * basically we just need to survive
- */
-#define BIO_SPLIT_ENTRIES 2
mempool_t *bio_split_pool __read_mostly;
-struct biovec_slab {
- int nr_vecs;
- char *name;
- struct kmem_cache *slab;
-};
-
/*
* if you change this list, also change bvec_alloc or things will
* break badly! cannot be bigger than what you can fit into an
@@ -60,23 +45,17 @@
#undef BV
/*
- * bio_set is used to allow other portions of the IO system to
- * allocate their own private memory pools for bio and iovec structures.
- * These memory pools in turn all allocate from the bio_slab
- * and the bvec_slabs[].
- */
-struct bio_set {
- mempool_t *bio_pool;
- mempool_t *bvec_pools[BIOVEC_NR_POOLS];
-};
-
-/*
* fs_bio_set is the bio_set containing bio and iovec memory pools used by
* IO code that does not need private memory pools.
*/
-static struct bio_set *fs_bio_set;
+struct bio_set *fs_bio_set;
-static inline struct bio_vec *bvec_alloc_bs(gfp_t gfp_mask, int nr, unsigned long *idx, struct bio_set *bs)
+unsigned int bvec_nr_vecs(unsigned short idx)
+{
+ return bvec_slabs[idx].nr_vecs;
+}
+
+struct bio_vec *bvec_alloc_bs(gfp_t gfp_mask, int nr, unsigned long *idx, struct bio_set *bs)
{
struct bio_vec *bvl;
@@ -117,6 +96,9 @@
mempool_free(bio->bi_io_vec, bio_set->bvec_pools[pool_idx]);
}
+ if (bio_integrity(bio))
+ bio_integrity_free(bio, bio_set);
+
mempool_free(bio, bio_set->bio_pool);
}
@@ -275,9 +257,19 @@
{
struct bio *b = bio_alloc_bioset(gfp_mask, bio->bi_max_vecs, fs_bio_set);
- if (b) {
- b->bi_destructor = bio_fs_destructor;
- __bio_clone(b, bio);
+ if (!b)
+ return NULL;
+
+ b->bi_destructor = bio_fs_destructor;
+ __bio_clone(b, bio);
+
+ if (bio_integrity(bio)) {
+ int ret;
+
+ ret = bio_integrity_clone(b, bio, fs_bio_set);
+
+ if (ret < 0)
+ return NULL;
}
return b;
@@ -333,10 +325,19 @@
if (page == prev->bv_page &&
offset == prev->bv_offset + prev->bv_len) {
prev->bv_len += len;
- if (q->merge_bvec_fn &&
- q->merge_bvec_fn(q, bio, prev) < len) {
- prev->bv_len -= len;
- return 0;
+
+ if (q->merge_bvec_fn) {
+ struct bvec_merge_data bvm = {
+ .bi_bdev = bio->bi_bdev,
+ .bi_sector = bio->bi_sector,
+ .bi_size = bio->bi_size,
+ .bi_rw = bio->bi_rw,
+ };
+
+ if (q->merge_bvec_fn(q, &bvm, prev) < len) {
+ prev->bv_len -= len;
+ return 0;
+ }
}
goto done;
@@ -377,11 +378,18 @@
* queue to get further control
*/
if (q->merge_bvec_fn) {
+ struct bvec_merge_data bvm = {
+ .bi_bdev = bio->bi_bdev,
+ .bi_sector = bio->bi_sector,
+ .bi_size = bio->bi_size,
+ .bi_rw = bio->bi_rw,
+ };
+
/*
* merge_bvec_fn() returns number of bytes it can accept
* at this offset
*/
- if (q->merge_bvec_fn(q, bio, bvec) < len) {
+ if (q->merge_bvec_fn(q, &bvm, bvec) < len) {
bvec->bv_page = NULL;
bvec->bv_len = 0;
bvec->bv_offset = 0;
@@ -1249,6 +1257,9 @@
bp->bio1.bi_private = bi;
bp->bio2.bi_private = pool;
+ if (bio_integrity(bi))
+ bio_integrity_split(bi, bp, first_sectors);
+
return bp;
}
@@ -1290,6 +1301,7 @@
if (bs->bio_pool)
mempool_destroy(bs->bio_pool);
+ bioset_integrity_free(bs);
biovec_free_pools(bs);
kfree(bs);
@@ -1306,6 +1318,9 @@
if (!bs->bio_pool)
goto bad;
+ if (bioset_integrity_create(bs, bio_pool_size))
+ goto bad;
+
if (!biovec_create_pools(bs, bvec_pool_size))
return bs;
@@ -1332,6 +1347,7 @@
{
bio_slab = KMEM_CACHE(bio, SLAB_HWCACHE_ALIGN|SLAB_PANIC);
+ bio_integrity_init_slab();
biovec_init_slabs();
fs_bio_set = bioset_create(BIO_POOL_SIZE, 2);
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 7d822fa..10d8a0a 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -12,6 +12,7 @@
#include <linux/kmod.h>
#include <linux/major.h>
#include <linux/smp_lock.h>
+#include <linux/device_cgroup.h>
#include <linux/highmem.h>
#include <linux/blkdev.h>
#include <linux/module.h>
@@ -928,9 +929,22 @@
{
struct module *owner = NULL;
struct gendisk *disk;
- int ret = -ENXIO;
+ int ret;
int part;
+ int perm = 0;
+ if (file->f_mode & FMODE_READ)
+ perm |= MAY_READ;
+ if (file->f_mode & FMODE_WRITE)
+ perm |= MAY_WRITE;
+ /*
+ * hooks: /n/, see "layering violations".
+ */
+ ret = devcgroup_inode_permission(bdev->bd_inode, perm);
+ if (ret != 0)
+ return ret;
+
+ ret = -ENXIO;
file->f_mapping = bdev->bd_inode->i_mapping;
lock_kernel();
disk = get_gendisk(bdev->bd_dev, &part);
diff --git a/fs/buffer.c b/fs/buffer.c
index a073f3f..0f51c0f 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -821,7 +821,7 @@
* contents - it is a noop if I/O is still in
* flight on potentially older contents.
*/
- ll_rw_block(SWRITE, 1, &bh);
+ ll_rw_block(SWRITE_SYNC, 1, &bh);
brelse(bh);
spin_lock(lock);
}
@@ -2940,16 +2940,19 @@
for (i = 0; i < nr; i++) {
struct buffer_head *bh = bhs[i];
- if (rw == SWRITE)
+ if (rw == SWRITE || rw == SWRITE_SYNC)
lock_buffer(bh);
else if (test_set_buffer_locked(bh))
continue;
- if (rw == WRITE || rw == SWRITE) {
+ if (rw == WRITE || rw == SWRITE || rw == SWRITE_SYNC) {
if (test_clear_buffer_dirty(bh)) {
bh->b_end_io = end_buffer_write_sync;
get_bh(bh);
- submit_bh(WRITE, bh);
+ if (rw == SWRITE_SYNC)
+ submit_bh(WRITE_SYNC, bh);
+ else
+ submit_bh(WRITE, bh);
continue;
}
} else {
@@ -2978,7 +2981,7 @@
if (test_clear_buffer_dirty(bh)) {
get_bh(bh);
bh->b_end_io = end_buffer_write_sync;
- ret = submit_bh(WRITE, bh);
+ ret = submit_bh(WRITE_SYNC, bh);
wait_on_buffer(bh);
if (buffer_eopnotsupp(bh)) {
clear_buffer_eopnotsupp(bh);
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 28e3d5c..1f34652 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -2,6 +2,11 @@
------------
DFS support added (Microsoft Distributed File System client support needed
for referrals which enable a hierarchical name space among servers).
+Disable temporary caching of mode bits to servers which do not support
+storing of mode (e.g. Windows servers, when client mounts without cifsacl
+mount option) and add new "dynperm" mount option to enable temporary caching
+of mode (enable old behavior). Fix hang on mount caused when server crashes
+tcp session during negotiate protocol.
Version 1.52
------------
diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index cb52cbb..f58e41d 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -186,6 +186,11 @@
}
}
}
+
+ /* don't trust len bigger than ctx buffer */
+ if (*len > ctx->end - ctx->pointer)
+ return 0;
+
return 1;
}
@@ -203,6 +208,10 @@
if (!asn1_length_decode(ctx, &def, &len))
return 0;
+ /* primitive shall be definite, indefinite shall be constructed */
+ if (*con == ASN1_PRI && !def)
+ return 0;
+
if (def)
*eoc = ctx->pointer + len;
else
@@ -389,6 +398,11 @@
unsigned long *optr;
size = eoc - ctx->pointer + 1;
+
+ /* first subid actually encodes first two subids */
+ if (size < 2 || size > ULONG_MAX/sizeof(unsigned long))
+ return 0;
+
*oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC);
if (*oid == NULL)
return 0;
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index 34902cf..0e9fc2b 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -34,11 +34,11 @@
static struct cifs_wksid wksidarr[NUM_WK_SIDS] = {
{{1, 0, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0} }, "null user"},
{{1, 1, {0, 0, 0, 0, 0, 1}, {0, 0, 0, 0, 0} }, "nobody"},
- {{1, 1, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(11), 0, 0, 0, 0} }, "net-users"},
- {{1, 1, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(18), 0, 0, 0, 0} }, "sys"},
- {{1, 2, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(32), cpu_to_le32(544), 0, 0, 0} }, "root"},
- {{1, 2, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(32), cpu_to_le32(545), 0, 0, 0} }, "users"},
- {{1, 2, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(32), cpu_to_le32(546), 0, 0, 0} }, "guest"} }
+ {{1, 1, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(11), 0, 0, 0, 0} }, "net-users"},
+ {{1, 1, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(18), 0, 0, 0, 0} }, "sys"},
+ {{1, 2, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(32), __constant_cpu_to_le32(544), 0, 0, 0} }, "root"},
+ {{1, 2, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(32), __constant_cpu_to_le32(545), 0, 0, 0} }, "users"},
+ {{1, 2, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(32), __constant_cpu_to_le32(546), 0, 0, 0} }, "guest"} }
;
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 5df93fd..86b4d5f 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -97,9 +97,6 @@
{
struct inode *inode;
struct cifs_sb_info *cifs_sb;
-#ifdef CONFIG_CIFS_DFS_UPCALL
- int len;
-#endif
int rc = 0;
/* BB should we make this contingent on mount parm? */
@@ -117,15 +114,17 @@
* complex operation (mount), and in case of fail
* just exit instead of doing mount and attempting
* undo it if this copy fails?*/
- len = strlen(data);
- cifs_sb->mountdata = kzalloc(len + 1, GFP_KERNEL);
- if (cifs_sb->mountdata == NULL) {
- kfree(sb->s_fs_info);
- sb->s_fs_info = NULL;
- return -ENOMEM;
+ if (data) {
+ int len = strlen(data);
+ cifs_sb->mountdata = kzalloc(len + 1, GFP_KERNEL);
+ if (cifs_sb->mountdata == NULL) {
+ kfree(sb->s_fs_info);
+ sb->s_fs_info = NULL;
+ return -ENOMEM;
+ }
+ strncpy(cifs_sb->mountdata, data, len + 1);
+ cifs_sb->mountdata[len] = '\0';
}
- strncpy(cifs_sb->mountdata, data, len + 1);
- cifs_sb->mountdata[len] = '\0';
#endif
rc = cifs_mount(sb, cifs_sb, data, devname);
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 0891405..9cfcf32 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -333,7 +333,6 @@
bool messageMode:1; /* for pipes: message vs byte mode */
atomic_t wrtPending; /* handle in use - defer close */
struct semaphore fh_sem; /* prevents reopen race after dead ses*/
- char *search_resume_name; /* BB removeme BB */
struct cifs_search_info srch_inf;
};
@@ -626,7 +625,7 @@
GLOBAL_EXTERN atomic_t tcpSesReconnectCount;
GLOBAL_EXTERN atomic_t tconInfoReconnectCount;
-/* Various Debug counters to remove someday (BB) */
+/* Various Debug counters */
GLOBAL_EXTERN atomic_t bufAllocCount; /* current number allocated */
#ifdef CONFIG_CIFS_STATS2
GLOBAL_EXTERN atomic_t totBufAllocCount; /* total allocated over all time */
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index 65d58b4..0f327c2 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -79,6 +79,19 @@
#define TRANS2_GET_DFS_REFERRAL 0x10
#define TRANS2_REPORT_DFS_INCOSISTENCY 0x11
+/* SMB Transact (Named Pipe) subcommand codes */
+#define TRANS_SET_NMPIPE_STATE 0x0001
+#define TRANS_RAW_READ_NMPIPE 0x0011
+#define TRANS_QUERY_NMPIPE_STATE 0x0021
+#define TRANS_QUERY_NMPIPE_INFO 0x0022
+#define TRANS_PEEK_NMPIPE 0x0023
+#define TRANS_TRANSACT_NMPIPE 0x0026
+#define TRANS_RAW_WRITE_NMPIPE 0x0031
+#define TRANS_READ_NMPIPE 0x0036
+#define TRANS_WRITE_NMPIPE 0x0037
+#define TRANS_WAIT_NMPIPE 0x0053
+#define TRANS_CALL_NMPIPE 0x0054
+
/* NT Transact subcommand codes */
#define NT_TRANSACT_CREATE 0x01
#define NT_TRANSACT_IOCTL 0x02
@@ -328,12 +341,13 @@
#define CREATE_COMPLETE_IF_OPLK 0x00000100 /* should be zero */
#define CREATE_NO_EA_KNOWLEDGE 0x00000200
#define CREATE_EIGHT_DOT_THREE 0x00000400 /* doc says this is obsolete
- open for recovery flag - should
- be zero */
+ "open for recovery" flag - should
+ be zero in any case */
+#define CREATE_OPEN_FOR_RECOVERY 0x00000400
#define CREATE_RANDOM_ACCESS 0x00000800
#define CREATE_DELETE_ON_CLOSE 0x00001000
#define CREATE_OPEN_BY_ID 0x00002000
-#define CREATE_OPEN_BACKUP_INTN 0x00004000
+#define CREATE_OPEN_BACKUP_INTENT 0x00004000
#define CREATE_NO_COMPRESSION 0x00008000
#define CREATE_RESERVE_OPFILTER 0x00100000 /* should be zero */
#define OPEN_REPARSE_POINT 0x00200000
@@ -722,7 +736,6 @@
#define SMB_CSC_CACHE_AUTO_REINT 0x0004
#define SMB_CSC_CACHE_VDO 0x0008
#define SMB_CSC_NO_CACHING 0x000C
-
#define SMB_UNIQUE_FILE_NAME 0x0010
#define SMB_EXTENDED_SIGNATURES 0x0020
@@ -806,7 +819,7 @@
#define ICOUNT_MASK 0x00FF
#define PIPE_READ_MODE 0x0100
#define NAMED_PIPE_TYPE 0x0400
-#define PIPE_END_POINT 0x0800
+#define PIPE_END_POINT 0x4000
#define BLOCKING_NAMED_PIPE 0x8000
typedef struct smb_com_open_req { /* also handles create */
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 9b8b4cf..4511b70 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1728,7 +1728,7 @@
{
int rc = 0;
LOCK_REQ *pSMB = NULL;
- LOCK_RSP *pSMBr = NULL;
+/* LOCK_RSP *pSMBr = NULL; */ /* No response data other than rc to parse */
int bytes_returned;
int timeout = 0;
__u16 count;
@@ -1739,8 +1739,6 @@
if (rc)
return rc;
- pSMBr = (LOCK_RSP *)pSMB; /* BB removeme BB */
-
if (lockType == LOCKING_ANDX_OPLOCK_RELEASE) {
timeout = CIFS_ASYNC_OP; /* no response expected */
pSMB->Timeout = 0;
@@ -1774,7 +1772,7 @@
if (waitFlag) {
rc = SendReceiveBlockingLock(xid, tcon, (struct smb_hdr *) pSMB,
- (struct smb_hdr *) pSMBr, &bytes_returned);
+ (struct smb_hdr *) pSMB, &bytes_returned);
cifs_small_buf_release(pSMB);
} else {
rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *)pSMB,
@@ -3927,9 +3925,9 @@
}
ref = (struct dfs_referral_level_3 *) &(pSMBr->referrals);
- if (ref->VersionNumber != 3) {
+ if (ref->VersionNumber != cpu_to_le16(3)) {
cERROR(1, ("Referrals of V%d version are not supported,"
- "should be V3", ref->VersionNumber));
+ "should be V3", le16_to_cpu(ref->VersionNumber)));
rc = -EINVAL;
goto parse_DFS_referrals_exit;
}
@@ -3977,7 +3975,7 @@
if (rc)
goto parse_DFS_referrals_exit;
- ref += ref->Size;
+ ref += le16_to_cpu(ref->Size);
}
parse_DFS_referrals_exit:
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 023434f..e8fa46c 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -653,6 +653,7 @@
spin_lock(&GlobalMid_Lock);
server->tcpStatus = CifsExiting;
spin_unlock(&GlobalMid_Lock);
+ wake_up_all(&server->response_q);
/* don't exit until kthread_stop is called */
set_current_state(TASK_UNINTERRUPTIBLE);
@@ -2120,6 +2121,10 @@
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO;
}
+ if ((volume_info.cifs_acl) && (volume_info.dynperm))
+ cERROR(1, ("mount option dynperm ignored if cifsacl "
+ "mount option supported"));
+
tcon =
find_unc(sin_server.sin_addr.s_addr, volume_info.UNC,
volume_info.username);
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index f0b5b5f..fb69c1f 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -260,7 +260,9 @@
buf, inode->i_sb, xid,
&fileHandle);
if (newinode) {
- newinode->i_mode = mode;
+ if (cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_DYNPERM)
+ newinode->i_mode = mode;
if ((oplock & CIFS_CREATE_ACTION) &&
(cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_SET_UID)) {
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 8636cec..0aac824 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -546,7 +546,6 @@
msleep(timeout);
timeout *= 8;
}
- kfree(pSMBFile->search_resume_name);
kfree(file->private_data);
file->private_data = NULL;
} else
@@ -605,12 +604,6 @@
else
cifs_buf_release(ptmp);
}
- ptmp = pCFileStruct->search_resume_name;
- if (ptmp) {
- cFYI(1, ("closedir free resume name"));
- pCFileStruct->search_resume_name = NULL;
- kfree(ptmp);
- }
kfree(file->private_data);
file->private_data = NULL;
}
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 129dbfe..2e904bd 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -219,15 +219,15 @@
rc = CIFSSMBUnixQPathInfo(xid, pTcon, full_path, &find_data,
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (rc) {
- if (rc == -EREMOTE && !is_dfs_referral) {
- is_dfs_referral = true;
- cFYI(DBG2, ("DFS ref"));
- /* for DFS, server does not give us real inode data */
- fill_fake_finddataunix(&find_data, sb);
- rc = 0;
- }
- }
+ if (rc == -EREMOTE && !is_dfs_referral) {
+ is_dfs_referral = true;
+ cFYI(DBG2, ("DFS ref"));
+ /* for DFS, server does not give us real inode data */
+ fill_fake_finddataunix(&find_data, sb);
+ rc = 0;
+ } else if (rc)
+ goto cgiiu_exit;
+
num_of_bytes = le64_to_cpu(find_data.NumOfBytes);
end_of_file = le64_to_cpu(find_data.EndOfFile);
@@ -236,7 +236,7 @@
*pinode = new_inode(sb);
if (*pinode == NULL) {
rc = -ENOMEM;
- goto cgiiu_exit;
+ goto cgiiu_exit;
}
/* Is an i_ino of zero legal? */
/* note ino incremented to unique num in new_inode */
@@ -418,6 +418,7 @@
char *buf = NULL;
bool adjustTZ = false;
bool is_dfs_referral = false;
+ umode_t default_mode;
pTcon = cifs_sb->tcon;
cFYI(1, ("Getting info on %s", full_path));
@@ -530,47 +531,42 @@
inode->i_mtime.tv_sec += pTcon->ses->server->timeAdj;
}
- /* set default mode. will override for dirs below */
- if (atomic_read(&cifsInfo->inUse) == 0)
- /* new inode, can safely set these fields */
- inode->i_mode = cifs_sb->mnt_file_mode;
- else /* since we set the inode type below we need to mask off
- to avoid strange results if type changes and both
- get orred in */
- inode->i_mode &= ~S_IFMT;
-/* if (attr & ATTR_REPARSE) */
- /* We no longer handle these as symlinks because we could not
- follow them due to the absolute path with drive letter */
- if (attr & ATTR_DIRECTORY) {
- /* override default perms since we do not do byte range locking
- on dirs */
- inode->i_mode = cifs_sb->mnt_dir_mode;
- inode->i_mode |= S_IFDIR;
- } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
- (cifsInfo->cifsAttrs & ATTR_SYSTEM) &&
- /* No need to le64 convert size of zero */
- (pfindData->EndOfFile == 0)) {
- inode->i_mode = cifs_sb->mnt_file_mode;
- inode->i_mode |= S_IFIFO;
-/* BB Finish for SFU style symlinks and devices */
- } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
- (cifsInfo->cifsAttrs & ATTR_SYSTEM)) {
- if (decode_sfu_inode(inode, le64_to_cpu(pfindData->EndOfFile),
- full_path, cifs_sb, xid))
- cFYI(1, ("Unrecognized sfu inode type"));
+ /* get default inode mode */
+ if (attr & ATTR_DIRECTORY)
+ default_mode = cifs_sb->mnt_dir_mode;
+ else
+ default_mode = cifs_sb->mnt_file_mode;
- cFYI(1, ("sfu mode 0%o", inode->i_mode));
+ /* set permission bits */
+ if (atomic_read(&cifsInfo->inUse) == 0 ||
+ (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0)
+ inode->i_mode = default_mode;
+ else {
+ /* just reenable write bits if !ATTR_READONLY */
+ if ((inode->i_mode & S_IWUGO) == 0 &&
+ (attr & ATTR_READONLY) == 0)
+ inode->i_mode |= (S_IWUGO & default_mode);
+ inode->i_mode &= ~S_IFMT;
+ }
+ /* clear write bits if ATTR_READONLY is set */
+ if (attr & ATTR_READONLY)
+ inode->i_mode &= ~S_IWUGO;
+
+ /* set inode type */
+ if ((attr & ATTR_SYSTEM) &&
+ (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) {
+ /* no need to fix endianness on 0 */
+ if (pfindData->EndOfFile == 0)
+ inode->i_mode |= S_IFIFO;
+ else if (decode_sfu_inode(inode,
+ le64_to_cpu(pfindData->EndOfFile),
+ full_path, cifs_sb, xid))
+ cFYI(1, ("unknown SFU file type\n"));
} else {
- inode->i_mode |= S_IFREG;
- /* treat dos attribute of read-only as read-only mode eg 555 */
- if (cifsInfo->cifsAttrs & ATTR_READONLY)
- inode->i_mode &= ~(S_IWUGO);
- else if ((inode->i_mode & S_IWUGO) == 0)
- /* the ATTR_READONLY flag may have been */
- /* changed on server -- set any w bits */
- /* allowed by mnt_file_mode */
- inode->i_mode |= (S_IWUGO & cifs_sb->mnt_file_mode);
- /* BB add code to validate if device or weird share or device type? */
+ if (attr & ATTR_DIRECTORY)
+ inode->i_mode |= S_IFDIR;
+ else
+ inode->i_mode |= S_IFREG;
}
spin_lock(&inode->i_lock);
@@ -1019,8 +1015,11 @@
CIFS_MOUNT_MAP_SPECIAL_CHR);
}
if (direntry->d_inode) {
- direntry->d_inode->i_mode = mode;
- direntry->d_inode->i_mode |= S_IFDIR;
+ if (cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_DYNPERM)
+ direntry->d_inode->i_mode =
+ (mode | S_IFDIR);
+
if (cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_SET_UID) {
direntry->d_inode->i_uid =
@@ -1547,13 +1546,26 @@
} else
goto cifs_setattr_exit;
}
- if (attrs->ia_valid & ATTR_UID) {
- cFYI(1, ("UID changed to %d", attrs->ia_uid));
- uid = attrs->ia_uid;
- }
- if (attrs->ia_valid & ATTR_GID) {
- cFYI(1, ("GID changed to %d", attrs->ia_gid));
- gid = attrs->ia_gid;
+
+ /*
+ * Without unix extensions we can't send ownership changes to the
+ * server, so silently ignore them. This is consistent with how
+ * local DOS/Windows filesystems behave (VFAT, NTFS, etc). With
+ * CIFSACL support + proper Windows to Unix idmapping, we may be
+ * able to support this in the future.
+ */
+ if (!pTcon->unix_ext &&
+ !(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) {
+ attrs->ia_valid &= ~(ATTR_UID | ATTR_GID);
+ } else {
+ if (attrs->ia_valid & ATTR_UID) {
+ cFYI(1, ("UID changed to %d", attrs->ia_uid));
+ uid = attrs->ia_uid;
+ }
+ if (attrs->ia_valid & ATTR_GID) {
+ cFYI(1, ("GID changed to %d", attrs->ia_gid));
+ gid = attrs->ia_gid;
+ }
}
time_buf.Attributes = 0;
@@ -1563,7 +1575,7 @@
attrs->ia_valid &= ~ATTR_MODE;
if (attrs->ia_valid & ATTR_MODE) {
- cFYI(1, ("Mode changed to 0x%x", attrs->ia_mode));
+ cFYI(1, ("Mode changed to 0%o", attrs->ia_mode));
mode = attrs->ia_mode;
}
@@ -1578,18 +1590,18 @@
#ifdef CONFIG_CIFS_EXPERIMENTAL
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
rc = mode_to_acl(inode, full_path, mode);
- else if ((mode & S_IWUGO) == 0) {
-#else
- if ((mode & S_IWUGO) == 0) {
+ else
#endif
- /* not writeable */
- if ((cifsInode->cifsAttrs & ATTR_READONLY) == 0) {
- set_dosattr = true;
- time_buf.Attributes =
- cpu_to_le32(cifsInode->cifsAttrs |
- ATTR_READONLY);
- }
- } else if (cifsInode->cifsAttrs & ATTR_READONLY) {
+ if (((mode & S_IWUGO) == 0) &&
+ (cifsInode->cifsAttrs & ATTR_READONLY) == 0) {
+ set_dosattr = true;
+ time_buf.Attributes = cpu_to_le32(cifsInode->cifsAttrs |
+ ATTR_READONLY);
+ /* fix up mode if we're not using dynperm */
+ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0)
+ attrs->ia_mode = inode->i_mode & ~S_IWUGO;
+ } else if ((mode & S_IWUGO) &&
+ (cifsInode->cifsAttrs & ATTR_READONLY)) {
/* If file is readonly on server, we would
not be able to write to it - so if any write
bit is enabled for user or group or other we
@@ -1600,6 +1612,20 @@
/* Windows ignores set to zero */
if (time_buf.Attributes == 0)
time_buf.Attributes |= cpu_to_le32(ATTR_NORMAL);
+
+ /* reset local inode permissions to normal */
+ if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)) {
+ attrs->ia_mode &= ~(S_IALLUGO);
+ if (S_ISDIR(inode->i_mode))
+ attrs->ia_mode |=
+ cifs_sb->mnt_dir_mode;
+ else
+ attrs->ia_mode |=
+ cifs_sb->mnt_file_mode;
+ }
+ } else if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)) {
+ /* ignore mode change - ATTR_READONLY hasn't changed */
+ attrs->ia_valid &= ~ATTR_MODE;
}
}
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 1d69b80..4b17f8f 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -519,8 +519,7 @@
pnotify = (struct file_notify_information *)
((char *)&pSMBr->hdr.Protocol + data_offset);
cFYI(1, ("dnotify on %s Action: 0x%x",
- pnotify->FileName,
- pnotify->Action)); /* BB removeme BB */
+ pnotify->FileName, pnotify->Action));
/* cifs_dump_mem("Rcvd notify Data: ",buf,
sizeof(struct smb_hdr)+60); */
return true;
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 713c251..83f3069 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -132,6 +132,7 @@
__u32 attr;
__u64 allocation_size;
__u64 end_of_file;
+ umode_t default_mode;
/* save mtime and size */
local_mtime = tmp_inode->i_mtime;
@@ -187,48 +188,54 @@
if (atomic_read(&cifsInfo->inUse) == 0) {
tmp_inode->i_uid = cifs_sb->mnt_uid;
tmp_inode->i_gid = cifs_sb->mnt_gid;
- /* set default mode. will override for dirs below */
- tmp_inode->i_mode = cifs_sb->mnt_file_mode;
- } else {
- /* mask off the type bits since it gets set
- below and we do not want to get two type
- bits set */
+ }
+
+ if (attr & ATTR_DIRECTORY)
+ default_mode = cifs_sb->mnt_dir_mode;
+ else
+ default_mode = cifs_sb->mnt_file_mode;
+
+ /* set initial permissions */
+ if ((atomic_read(&cifsInfo->inUse) == 0) ||
+ (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0)
+ tmp_inode->i_mode = default_mode;
+ else {
+ /* just reenable write bits if !ATTR_READONLY */
+ if ((tmp_inode->i_mode & S_IWUGO) == 0 &&
+ (attr & ATTR_READONLY) == 0)
+ tmp_inode->i_mode |= (S_IWUGO & default_mode);
+
tmp_inode->i_mode &= ~S_IFMT;
}
- if (attr & ATTR_DIRECTORY) {
- *pobject_type = DT_DIR;
- /* override default perms since we do not lock dirs */
- if (atomic_read(&cifsInfo->inUse) == 0)
- tmp_inode->i_mode = cifs_sb->mnt_dir_mode;
- tmp_inode->i_mode |= S_IFDIR;
- } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
- (attr & ATTR_SYSTEM)) {
+ /* clear write bits if ATTR_READONLY is set */
+ if (attr & ATTR_READONLY)
+ tmp_inode->i_mode &= ~S_IWUGO;
+
+ /* set inode type */
+ if ((attr & ATTR_SYSTEM) &&
+ (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) {
if (end_of_file == 0) {
- *pobject_type = DT_FIFO;
tmp_inode->i_mode |= S_IFIFO;
+ *pobject_type = DT_FIFO;
} else {
- /* rather than get the type here, we mark the
- inode as needing revalidate and get the real type
- (blk vs chr vs. symlink) later ie in lookup */
- *pobject_type = DT_REG;
+ /*
+ * trying to get the type can be slow, so just call
+ * this a regular file for now, and mark for reval
+ */
tmp_inode->i_mode |= S_IFREG;
+ *pobject_type = DT_REG;
cifsInfo->time = 0;
}
-/* we no longer mark these because we could not follow them */
-/* } else if (attr & ATTR_REPARSE) {
- *pobject_type = DT_LNK;
- tmp_inode->i_mode |= S_IFLNK; */
} else {
- *pobject_type = DT_REG;
- tmp_inode->i_mode |= S_IFREG;
- if (attr & ATTR_READONLY)
- tmp_inode->i_mode &= ~(S_IWUGO);
- else if ((tmp_inode->i_mode & S_IWUGO) == 0)
- /* the ATTR_READONLY flag may have been changed on */
- /* server -- set any w bits allowed by mnt_file_mode */
- tmp_inode->i_mode |= (S_IWUGO & cifs_sb->mnt_file_mode);
- } /* could add code here - to validate if device or weird share type? */
+ if (attr & ATTR_DIRECTORY) {
+ tmp_inode->i_mode |= S_IFDIR;
+ *pobject_type = DT_DIR;
+ } else {
+ tmp_inode->i_mode |= S_IFREG;
+ *pobject_type = DT_REG;
+ }
+ }
/* can not fill in nlink here as in qpathinfo version and Unx search */
if (atomic_read(&cifsInfo->inUse) == 0)
@@ -675,8 +682,6 @@
cifsFile->invalidHandle = true;
CIFSFindClose(xid, pTcon, cifsFile->netfid);
}
- kfree(cifsFile->search_resume_name);
- cifsFile->search_resume_name = NULL;
if (cifsFile->srch_inf.ntwrk_buf_start) {
cFYI(1, ("freeing SMB ff cache buf on search rewind"));
if (cifsFile->srch_inf.smallBuf)
@@ -1043,9 +1048,7 @@
} /* else {
cifsFile->invalidHandle = true;
CIFSFindClose(xid, pTcon, cifsFile->netfid);
- }
- kfree(cifsFile->search_resume_name);
- cifsFile->search_resume_name = NULL; */
+ } */
rc = find_cifs_entry(xid, pTcon, file,
¤t_entry, &num_to_fill);
diff --git a/fs/dcache.c b/fs/dcache.c
index 3ee588d5..6068c25 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -17,6 +17,7 @@
#include <linux/syscalls.h>
#include <linux/string.h>
#include <linux/mm.h>
+#include <linux/fdtable.h>
#include <linux/fs.h>
#include <linux/fsnotify.h>
#include <linux/slab.h>
@@ -106,9 +107,10 @@
/*
* Release the dentry's inode, using the filesystem
* d_iput() operation if defined.
- * Called with dcache_lock and per dentry lock held, drops both.
*/
static void dentry_iput(struct dentry * dentry)
+ __releases(dentry->d_lock)
+ __releases(dcache_lock)
{
struct inode *inode = dentry->d_inode;
if (inode) {
@@ -132,12 +134,13 @@
* d_kill - kill dentry and return parent
* @dentry: dentry to kill
*
- * Called with dcache_lock and d_lock, releases both. The dentry must
- * already be unhashed and removed from the LRU.
+ * The dentry must already be unhashed and removed from the LRU.
*
* If this is the root of the dentry tree, return NULL.
*/
static struct dentry *d_kill(struct dentry *dentry)
+ __releases(dentry->d_lock)
+ __releases(dcache_lock)
{
struct dentry *parent;
@@ -383,11 +386,11 @@
* Try to prune ancestors as well. This is necessary to prevent
* quadratic behavior of shrink_dcache_parent(), but is also expected
* to be beneficial in reducing dentry cache fragmentation.
- *
- * Called with dcache_lock, drops it and then regains.
- * Called with dentry->d_lock held, drops it.
*/
static void prune_one_dentry(struct dentry * dentry)
+ __releases(dentry->d_lock)
+ __releases(dcache_lock)
+ __acquires(dcache_lock)
{
__d_drop(dentry);
dentry = d_kill(dentry);
@@ -1604,10 +1607,9 @@
*
* Note: If ever the locking in lock_rename() changes, then please
* remember to update this too...
- *
- * On return, dcache_lock will have been unlocked.
*/
static struct dentry *__d_unalias(struct dentry *dentry, struct dentry *alias)
+ __releases(dcache_lock)
{
struct mutex *m1 = NULL, *m2 = NULL;
struct dentry *ret;
@@ -1743,11 +1745,9 @@
shouldnt_be_hashed:
spin_unlock(&dcache_lock);
BUG();
- goto shouldnt_be_hashed;
}
-static int prepend(char **buffer, int *buflen, const char *str,
- int namelen)
+static int prepend(char **buffer, int *buflen, const char *str, int namelen)
{
*buflen -= namelen;
if (*buflen < 0)
@@ -1757,8 +1757,13 @@
return 0;
}
+static int prepend_name(char **buffer, int *buflen, struct qstr *name)
+{
+ return prepend(buffer, buflen, name->name, name->len);
+}
+
/**
- * d_path - return the path of a dentry
+ * __d_path - return the path of a dentry
* @path: the dentry/vfsmount to report
* @root: root vfsmnt/dentry (may be modified by this function)
* @buffer: buffer to return value in
@@ -1779,9 +1784,10 @@
{
struct dentry *dentry = path->dentry;
struct vfsmount *vfsmnt = path->mnt;
- char * end = buffer+buflen;
- char * retval;
+ char *end = buffer + buflen;
+ char *retval;
+ spin_lock(&vfsmount_lock);
prepend(&end, &buflen, "\0", 1);
if (!IS_ROOT(dentry) && d_unhashed(dentry) &&
(prepend(&end, &buflen, " (deleted)", 10) != 0))
@@ -1800,38 +1806,37 @@
break;
if (dentry == vfsmnt->mnt_root || IS_ROOT(dentry)) {
/* Global root? */
- spin_lock(&vfsmount_lock);
if (vfsmnt->mnt_parent == vfsmnt) {
- spin_unlock(&vfsmount_lock);
goto global_root;
}
dentry = vfsmnt->mnt_mountpoint;
vfsmnt = vfsmnt->mnt_parent;
- spin_unlock(&vfsmount_lock);
continue;
}
parent = dentry->d_parent;
prefetch(parent);
- if ((prepend(&end, &buflen, dentry->d_name.name,
- dentry->d_name.len) != 0) ||
+ if ((prepend_name(&end, &buflen, &dentry->d_name) != 0) ||
(prepend(&end, &buflen, "/", 1) != 0))
goto Elong;
retval = end;
dentry = parent;
}
+out:
+ spin_unlock(&vfsmount_lock);
return retval;
global_root:
retval += 1; /* hit the slash */
- if (prepend(&retval, &buflen, dentry->d_name.name,
- dentry->d_name.len) != 0)
+ if (prepend_name(&retval, &buflen, &dentry->d_name) != 0)
goto Elong;
root->mnt = vfsmnt;
root->dentry = dentry;
- return retval;
+ goto out;
+
Elong:
- return ERR_PTR(-ENAMETOOLONG);
+ retval = ERR_PTR(-ENAMETOOLONG);
+ goto out;
}
/**
@@ -1845,9 +1850,9 @@
*
* Returns the buffer or an error code if the path was too long.
*
- * "buflen" should be positive. Caller holds the dcache_lock.
+ * "buflen" should be positive.
*/
-char *d_path(struct path *path, char *buf, int buflen)
+char *d_path(const struct path *path, char *buf, int buflen)
{
char *res;
struct path root;
@@ -1915,16 +1920,11 @@
retval = end-1;
*retval = '/';
- for (;;) {
- struct dentry *parent;
- if (IS_ROOT(dentry))
- break;
+ while (!IS_ROOT(dentry)) {
+ struct dentry *parent = dentry->d_parent;
- parent = dentry->d_parent;
prefetch(parent);
-
- if ((prepend(&end, &buflen, dentry->d_name.name,
- dentry->d_name.len) != 0) ||
+ if ((prepend_name(&end, &buflen, &dentry->d_name) != 0) ||
(prepend(&end, &buflen, "/", 1) != 0))
goto Elong;
@@ -1975,7 +1975,7 @@
error = -ENOENT;
/* Has the current directory has been unlinked? */
spin_lock(&dcache_lock);
- if (pwd.dentry->d_parent == pwd.dentry || !d_unhashed(pwd.dentry)) {
+ if (IS_ROOT(pwd.dentry) || !d_unhashed(pwd.dentry)) {
unsigned long len;
struct path tmp = root;
char * cwd;
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index 951ee33..c15c257 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -660,8 +660,6 @@
int ecryptfs_keyring_auth_tok_for_sig(struct key **auth_tok_key,
struct ecryptfs_auth_tok **auth_tok,
char *sig);
-int ecryptfs_write_zeros(struct file *file, pgoff_t index, int start,
- int num_zeros);
int ecryptfs_write_lower(struct inode *ecryptfs_inode, char *data,
loff_t offset, size_t size);
int ecryptfs_write_lower_page_segment(struct inode *ecryptfs_inode,
diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c
index 50c994a..09a4522 100644
--- a/fs/ecryptfs/miscdev.c
+++ b/fs/ecryptfs/miscdev.c
@@ -575,13 +575,11 @@
int rc;
atomic_set(&ecryptfs_num_miscdev_opens, 0);
- mutex_lock(&ecryptfs_daemon_hash_mux);
rc = misc_register(&ecryptfs_miscdev);
if (rc)
printk(KERN_ERR "%s: Failed to register miscellaneous device "
"for communications with userspace daemons; rc = [%d]\n",
__func__, rc);
- mutex_unlock(&ecryptfs_daemon_hash_mux);
return rc;
}
diff --git a/fs/ecryptfs/read_write.c b/fs/ecryptfs/read_write.c
index ebf5515..75c2ea9 100644
--- a/fs/ecryptfs/read_write.c
+++ b/fs/ecryptfs/read_write.c
@@ -157,20 +157,6 @@
ecryptfs_page_idx, rc);
goto out;
}
- if (start_offset_in_page) {
- /* Read in the page from the lower
- * into the eCryptfs inode page cache,
- * decrypting */
- rc = ecryptfs_decrypt_page(ecryptfs_page);
- if (rc) {
- printk(KERN_ERR "%s: Error decrypting "
- "page; rc = [%d]\n",
- __func__, rc);
- ClearPageUptodate(ecryptfs_page);
- page_cache_release(ecryptfs_page);
- goto out;
- }
- }
ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0);
/*
@@ -349,14 +335,6 @@
ecryptfs_page_idx, rc);
goto out;
}
- rc = ecryptfs_decrypt_page(ecryptfs_page);
- if (rc) {
- printk(KERN_ERR "%s: Error decrypting "
- "page; rc = [%d]\n", __func__, rc);
- ClearPageUptodate(ecryptfs_page);
- page_cache_release(ecryptfs_page);
- goto out;
- }
ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0);
memcpy((data + data_offset),
((char *)ecryptfs_page_virt + start_offset_in_page),
diff --git a/fs/exec.c b/fs/exec.c
index 9448f1b..fd92343 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -26,7 +26,6 @@
#include <linux/file.h>
#include <linux/fdtable.h>
#include <linux/mman.h>
-#include <linux/a.out.h>
#include <linux/stat.h>
#include <linux/fcntl.h>
#include <linux/smp_lock.h>
@@ -61,6 +60,11 @@
#include <linux/kmod.h>
#endif
+#ifdef __alpha__
+/* for /sbin/loader handling in search_binary_handler() */
+#include <linux/a.out.h>
+#endif
+
int core_uses_pid;
char core_pattern[CORENAME_MAX_SIZE] = "core";
int suid_dumpable = 0;
@@ -606,7 +610,7 @@
bprm->exec -= stack_shift;
down_write(&mm->mmap_sem);
- vm_flags = vma->vm_flags;
+ vm_flags = VM_STACK_FLAGS;
/*
* Adjust stack execute permissions; explicitly enable for
@@ -1155,7 +1159,7 @@
{
int try,retval;
struct linux_binfmt *fmt;
-#if defined(__alpha__) && defined(CONFIG_ARCH_SUPPORTS_AOUT)
+#ifdef __alpha__
/* handle /sbin/loader.. */
{
struct exec * eh = (struct exec *) bprm->buf;
diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c
index 28cfd0b..77278e9 100644
--- a/fs/ext3/resize.c
+++ b/fs/ext3/resize.c
@@ -580,7 +580,8 @@
}
blk = EXT3_SB(sb)->s_sbh->b_blocknr + 1 + EXT3_SB(sb)->s_gdb_count;
- data = (__le32 *)dind->b_data + EXT3_SB(sb)->s_gdb_count;
+ data = (__le32 *)dind->b_data + (EXT3_SB(sb)->s_gdb_count %
+ EXT3_ADDR_PER_BLOCK(sb));
end = (__le32 *)dind->b_data + EXT3_ADDR_PER_BLOCK(sb);
/* Get each reserved primary GDT block and verify it holds backups */
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index fe3119a..2845425 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -2875,8 +2875,10 @@
blk++;
}
out:
- if (len == towrite)
+ if (len == towrite) {
+ mutex_unlock(&inode->i_mutex);
return err;
+ }
if (inode->i_size < off+len-towrite) {
i_size_write(inode, off+len-towrite);
EXT3_I(inode)->i_disksize = inode->i_size;
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index 30494c5..9cc80b9 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -43,6 +43,46 @@
}
+static int ext4_block_in_group(struct super_block *sb, ext4_fsblk_t block,
+ ext4_group_t block_group)
+{
+ ext4_group_t actual_group;
+ ext4_get_group_no_and_offset(sb, block, &actual_group, 0);
+ if (actual_group == block_group)
+ return 1;
+ return 0;
+}
+
+static int ext4_group_used_meta_blocks(struct super_block *sb,
+ ext4_group_t block_group)
+{
+ ext4_fsblk_t tmp;
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
+ /* block bitmap, inode bitmap, and inode table blocks */
+ int used_blocks = sbi->s_itb_per_group + 2;
+
+ if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG)) {
+ struct ext4_group_desc *gdp;
+ struct buffer_head *bh;
+
+ gdp = ext4_get_group_desc(sb, block_group, &bh);
+ if (!ext4_block_in_group(sb, ext4_block_bitmap(sb, gdp),
+ block_group))
+ used_blocks--;
+
+ if (!ext4_block_in_group(sb, ext4_inode_bitmap(sb, gdp),
+ block_group))
+ used_blocks--;
+
+ tmp = ext4_inode_table(sb, gdp);
+ for (; tmp < ext4_inode_table(sb, gdp) +
+ sbi->s_itb_per_group; tmp++) {
+ if (!ext4_block_in_group(sb, tmp, block_group))
+ used_blocks -= 1;
+ }
+ }
+ return used_blocks;
+}
/* Initializes an uninitialized block bitmap if given, and returns the
* number of blocks free in the group. */
unsigned ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh,
@@ -105,20 +145,34 @@
free_blocks = group_blocks - bit_max;
if (bh) {
- ext4_fsblk_t start;
+ ext4_fsblk_t start, tmp;
+ int flex_bg = 0;
for (bit = 0; bit < bit_max; bit++)
ext4_set_bit(bit, bh->b_data);
start = ext4_group_first_block_no(sb, block_group);
- /* Set bits for block and inode bitmaps, and inode table */
- ext4_set_bit(ext4_block_bitmap(sb, gdp) - start, bh->b_data);
- ext4_set_bit(ext4_inode_bitmap(sb, gdp) - start, bh->b_data);
- for (bit = (ext4_inode_table(sb, gdp) - start),
- bit_max = bit + sbi->s_itb_per_group; bit < bit_max; bit++)
- ext4_set_bit(bit, bh->b_data);
+ if (EXT4_HAS_INCOMPAT_FEATURE(sb,
+ EXT4_FEATURE_INCOMPAT_FLEX_BG))
+ flex_bg = 1;
+ /* Set bits for block and inode bitmaps, and inode table */
+ tmp = ext4_block_bitmap(sb, gdp);
+ if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(tmp - start, bh->b_data);
+
+ tmp = ext4_inode_bitmap(sb, gdp);
+ if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(tmp - start, bh->b_data);
+
+ tmp = ext4_inode_table(sb, gdp);
+ for (; tmp < ext4_inode_table(sb, gdp) +
+ sbi->s_itb_per_group; tmp++) {
+ if (!flex_bg ||
+ ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(tmp - start, bh->b_data);
+ }
/*
* Also if the number of blocks within the group is
* less than the blocksize * 8 ( which is the size
@@ -126,8 +180,7 @@
*/
mark_bitmap_end(group_blocks, sb->s_blocksize * 8, bh->b_data);
}
-
- return free_blocks - sbi->s_itb_per_group - 2;
+ return free_blocks - ext4_group_used_meta_blocks(sb, block_group);
}
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 873ad9b..c9900aa 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2745,8 +2745,6 @@
sbi = EXT4_SB(sb);
es = sbi->s_es;
- ext4_debug("using block group %lu(%d)\n", ac->ac_b_ex.fe_group,
- gdp->bg_free_blocks_count);
err = -EIO;
bitmap_bh = read_block_bitmap(sb, ac->ac_b_ex.fe_group);
@@ -2762,6 +2760,9 @@
if (!gdp)
goto out_err;
+ ext4_debug("using block group %lu(%d)\n", ac->ac_b_ex.fe_group,
+ gdp->bg_free_blocks_count);
+
err = ext4_journal_get_write_access(handle, gdp_bh);
if (err)
goto out_err;
@@ -3094,8 +3095,7 @@
static void ext4_mb_use_group_pa(struct ext4_allocation_context *ac,
struct ext4_prealloc_space *pa)
{
- unsigned len = ac->ac_o_ex.fe_len;
-
+ unsigned int len = ac->ac_o_ex.fe_len;
ext4_get_group_no_and_offset(ac->ac_sb, pa->pa_pstart,
&ac->ac_b_ex.fe_group,
&ac->ac_b_ex.fe_start);
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 9f086a6..9ff7b1c 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -563,7 +563,8 @@
}
blk = EXT4_SB(sb)->s_sbh->b_blocknr + 1 + EXT4_SB(sb)->s_gdb_count;
- data = (__le32 *)dind->b_data + EXT4_SB(sb)->s_gdb_count;
+ data = (__le32 *)dind->b_data + (EXT4_SB(sb)->s_gdb_count %
+ EXT4_ADDR_PER_BLOCK(sb));
end = (__le32 *)dind->b_data + EXT4_ADDR_PER_BLOCK(sb);
/* Get each reserved primary GDT block and verify it holds backups */
@@ -854,7 +855,8 @@
*/
/* Update group descriptor block for new group */
- gdp = (struct ext4_group_desc *)primary->b_data + gdb_off;
+ gdp = (struct ext4_group_desc *)((char *)primary->b_data +
+ gdb_off * EXT4_DESC_SIZE(sb));
ext4_block_bitmap_set(sb, gdp, input->block_bitmap); /* LV FIXME */
ext4_inode_bitmap_set(sb, gdp, input->inode_bitmap); /* LV FIXME */
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 09d9359..02bf243 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -671,6 +671,7 @@
unsigned long def_mount_opts;
struct super_block *sb = vfs->mnt_sb;
struct ext4_sb_info *sbi = EXT4_SB(sb);
+ journal_t *journal = sbi->s_journal;
struct ext4_super_block *es = sbi->s_es;
def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
@@ -729,8 +730,15 @@
seq_printf(seq, ",commit=%u",
(unsigned) (sbi->s_commit_interval / HZ));
}
- if (test_opt(sb, BARRIER))
- seq_puts(seq, ",barrier=1");
+ /*
+ * We're changing the default of barrier mount option, so
+ * let's always display its mount state so it's clear what its
+ * status is.
+ */
+ seq_puts(seq, ",barrier=");
+ seq_puts(seq, test_opt(sb, BARRIER) ? "1" : "0");
+ if (test_opt(sb, JOURNAL_ASYNC_COMMIT))
+ seq_puts(seq, ",journal_async_commit");
if (test_opt(sb, NOBH))
seq_puts(seq, ",nobh");
if (!test_opt(sb, EXTENTS))
@@ -1907,6 +1915,7 @@
sbi->s_resgid = le16_to_cpu(es->s_def_resgid);
set_opt(sbi->s_mount_opt, RESERVATION);
+ set_opt(sbi->s_mount_opt, BARRIER);
/*
* turn on extents feature by default in ext4 filesystem
@@ -2189,6 +2198,29 @@
EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) {
if (ext4_load_journal(sb, es, journal_devnum))
goto failed_mount3;
+ if (!(sb->s_flags & MS_RDONLY) &&
+ EXT4_SB(sb)->s_journal->j_failed_commit) {
+ printk(KERN_CRIT "EXT4-fs error (device %s): "
+ "ext4_fill_super: Journal transaction "
+ "%u is corrupt\n", sb->s_id,
+ EXT4_SB(sb)->s_journal->j_failed_commit);
+ if (test_opt (sb, ERRORS_RO)) {
+ printk (KERN_CRIT
+ "Mounting filesystem read-only\n");
+ sb->s_flags |= MS_RDONLY;
+ EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
+ es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
+ }
+ if (test_opt(sb, ERRORS_PANIC)) {
+ EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
+ es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
+ ext4_commit_super(sb, es, 1);
+ printk(KERN_CRIT
+ "EXT4-fs (device %s): mount failed\n",
+ sb->s_id);
+ goto failed_mount4;
+ }
+ }
} else if (journal_inum) {
if (ext4_create_journal(sb, es, journal_inum))
goto failed_mount3;
@@ -3305,8 +3337,10 @@
blk++;
}
out:
- if (len == towrite)
+ if (len == towrite) {
+ mutex_unlock(&inode->i_mutex);
return err;
+ }
if (inode->i_size < off+len-towrite) {
i_size_write(inode, off+len-towrite);
EXT4_I(inode)->i_disksize = inode->i_size;
diff --git a/fs/fat/file.c b/fs/fat/file.c
index 27cc116..771326b 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -257,26 +257,34 @@
}
EXPORT_SYMBOL_GPL(fat_getattr);
-static int fat_check_mode(const struct msdos_sb_info *sbi, struct inode *inode,
- mode_t mode)
+static int fat_sanitize_mode(const struct msdos_sb_info *sbi,
+ struct inode *inode, umode_t *mode_ptr)
{
- mode_t mask, req = mode & ~S_IFMT;
+ mode_t mask, perm;
- if (S_ISREG(mode))
+ /*
+ * Note, the basic check is already done by a caller of
+ * (attr->ia_mode & ~MSDOS_VALID_MODE)
+ */
+
+ if (S_ISREG(inode->i_mode))
mask = sbi->options.fs_fmask;
else
mask = sbi->options.fs_dmask;
+ perm = *mode_ptr & ~(S_IFMT | mask);
+
/*
* Of the r and x bits, all (subject to umask) must be present. Of the
* w bits, either all (subject to umask) or none must be present.
*/
- req &= ~mask;
- if ((req & (S_IRUGO | S_IXUGO)) != (inode->i_mode & (S_IRUGO|S_IXUGO)))
+ if ((perm & (S_IRUGO | S_IXUGO)) != (inode->i_mode & (S_IRUGO|S_IXUGO)))
return -EPERM;
- if ((req & S_IWUGO) && ((req & S_IWUGO) != (S_IWUGO & ~mask)))
+ if ((perm & S_IWUGO) && ((perm & S_IWUGO) != (S_IWUGO & ~mask)))
return -EPERM;
+ *mode_ptr &= S_IFMT | perm;
+
return 0;
}
@@ -299,7 +307,7 @@
{
struct msdos_sb_info *sbi = MSDOS_SB(dentry->d_sb);
struct inode *inode = dentry->d_inode;
- int mask, error = 0;
+ int error = 0;
unsigned int ia_valid;
lock_kernel();
@@ -332,12 +340,13 @@
error = 0;
goto out;
}
+
if (((attr->ia_valid & ATTR_UID) &&
(attr->ia_uid != sbi->options.fs_uid)) ||
((attr->ia_valid & ATTR_GID) &&
(attr->ia_gid != sbi->options.fs_gid)) ||
((attr->ia_valid & ATTR_MODE) &&
- fat_check_mode(sbi, inode, attr->ia_mode) < 0))
+ (attr->ia_mode & ~MSDOS_VALID_MODE)))
error = -EPERM;
if (error) {
@@ -346,15 +355,16 @@
goto out;
}
- error = inode_setattr(inode, attr);
- if (error)
- goto out;
+ /*
+ * We don't return -EPERM here. Yes, strange, but this is too
+ * old behavior.
+ */
+ if (attr->ia_valid & ATTR_MODE) {
+ if (fat_sanitize_mode(sbi, inode, &attr->ia_mode) < 0)
+ attr->ia_valid &= ~ATTR_MODE;
+ }
- if (S_ISDIR(inode->i_mode))
- mask = sbi->options.fs_dmask;
- else
- mask = sbi->options.fs_fmask;
- inode->i_mode &= S_IFMT | (S_IRWXUGO & ~mask);
+ error = inode_setattr(inode, attr);
out:
unlock_kernel();
return error;
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 43e9951..3141690 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -591,7 +591,7 @@
fc->bdi.ra_pages = min(fc->bdi.ra_pages, ra_pages);
fc->minor = arg->minor;
fc->max_write = arg->minor < 5 ? 4096 : arg->max_write;
- fc->max_write = min_t(unsigned, 4096, fc->max_write);
+ fc->max_write = max_t(unsigned, 4096, fc->max_write);
fc->conn_init = 1;
}
fuse_put_request(fc, req);
@@ -667,7 +667,7 @@
fc->flags = d.flags;
fc->user_id = d.user_id;
fc->group_id = d.group_id;
- fc->max_read = min_t(unsigned, 4096, d.max_read);
+ fc->max_read = max_t(unsigned, 4096, d.max_read);
/* Used by get_root_inode() */
sb->s_fs_info = fc;
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index c19184f..bec76b1 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -246,15 +246,11 @@
}
-static inline unsigned int zero_metapath_length(const struct metapath *mp,
- unsigned height)
+static inline unsigned int metapath_branch_start(const struct metapath *mp)
{
- unsigned int i;
- for (i = 0; i < height - 1; i++) {
- if (mp->mp_list[i] != 0)
- return i;
- }
- return height;
+ if (mp->mp_list[0] == 0)
+ return 2;
+ return 1;
}
/**
@@ -436,7 +432,7 @@
struct gfs2_sbd *sdp = GFS2_SB(inode);
struct buffer_head *dibh = mp->mp_bh[0];
u64 bn, dblock = 0;
- unsigned n, i, blks, alloced = 0, iblks = 0, zmpl = 0;
+ unsigned n, i, blks, alloced = 0, iblks = 0, branch_start = 0;
unsigned dblks = 0;
unsigned ptrs_per_blk;
const unsigned end_of_metadata = height - 1;
@@ -471,9 +467,8 @@
/* Building up tree height */
state = ALLOC_GROW_HEIGHT;
iblks = height - ip->i_height;
- zmpl = zero_metapath_length(mp, height);
- iblks -= zmpl;
- iblks += height;
+ branch_start = metapath_branch_start(mp);
+ iblks += (height - branch_start);
}
}
@@ -509,13 +504,13 @@
sizeof(struct gfs2_meta_header));
*ptr = zero_bn;
state = ALLOC_GROW_DEPTH;
- for(i = zmpl; i < height; i++) {
+ for(i = branch_start; i < height; i++) {
if (mp->mp_bh[i] == NULL)
break;
brelse(mp->mp_bh[i]);
mp->mp_bh[i] = NULL;
}
- i = zmpl;
+ i = branch_start;
}
if (n == 0)
break;
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 6387523..3401628 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -195,7 +195,7 @@
depending on architecture. I've experimented with several ways
of writing this section such as using an else before the goto
but this one seems to be the fastest. */
- while ((unsigned char *)plong < end - 1) {
+ while ((unsigned char *)plong < end - sizeof(unsigned long)) {
prefetch(plong + 1);
if (((*plong) & LBITMASK) != lskipval)
break;
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 4d99685..a2ed72f 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -168,6 +168,7 @@
spin_unlock(&journal->j_state_lock);
/* And try again, without the barrier */
+ lock_buffer(bh);
set_buffer_uptodate(bh);
set_buffer_dirty(bh);
ret = submit_bh(WRITE, bh);
diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c
index 5d0405a..058f50f 100644
--- a/fs/jbd2/recovery.c
+++ b/fs/jbd2/recovery.c
@@ -344,6 +344,7 @@
*crc32_sum = crc32_be(*crc32_sum, (void *)obh->b_data,
obh->b_size);
}
+ put_bh(obh);
}
return 0;
}
@@ -610,9 +611,8 @@
chksum_err = chksum_seen = 0;
if (info->end_transaction) {
- printk(KERN_ERR "JBD: Transaction %u "
- "found to be corrupt.\n",
- next_commit_ID - 1);
+ journal->j_failed_commit =
+ info->end_transaction;
brelse(bh);
break;
}
@@ -643,10 +643,8 @@
if (!JBD2_HAS_INCOMPAT_FEATURE(journal,
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)){
- printk(KERN_ERR
- "JBD: Transaction %u "
- "found to be corrupt.\n",
- next_commit_ID);
+ journal->j_failed_commit =
+ next_commit_ID;
brelse(bh);
break;
}
diff --git a/fs/libfs.c b/fs/libfs.c
index b004dfa..baeb71e 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -512,6 +512,20 @@
mntput(mnt);
}
+/**
+ * simple_read_from_buffer - copy data from the buffer to user space
+ * @to: the user space buffer to read to
+ * @count: the maximum number of bytes to read
+ * @ppos: the current position in the buffer
+ * @from: the buffer to read from
+ * @available: the size of the buffer
+ *
+ * The simple_read_from_buffer() function reads up to @count bytes from the
+ * buffer @from at offset @ppos into the user space address starting at @to.
+ *
+ * On success, the number of bytes read is returned and the offset @ppos is
+ * advanced by this number, or negative value is returned on error.
+ **/
ssize_t simple_read_from_buffer(void __user *to, size_t count, loff_t *ppos,
const void *from, size_t available)
{
@@ -528,6 +542,37 @@
return count;
}
+/**
+ * memory_read_from_buffer - copy data from the buffer
+ * @to: the kernel space buffer to read to
+ * @count: the maximum number of bytes to read
+ * @ppos: the current position in the buffer
+ * @from: the buffer to read from
+ * @available: the size of the buffer
+ *
+ * The memory_read_from_buffer() function reads up to @count bytes from the
+ * buffer @from at offset @ppos into the kernel space address starting at @to.
+ *
+ * On success, the number of bytes read is returned and the offset @ppos is
+ * advanced by this number, or negative value is returned on error.
+ **/
+ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos,
+ const void *from, size_t available)
+{
+ loff_t pos = *ppos;
+
+ if (pos < 0)
+ return -EINVAL;
+ if (pos >= available)
+ return 0;
+ if (count > available - pos)
+ count = available - pos;
+ memcpy(to, from + pos, count);
+ *ppos = pos + count;
+
+ return count;
+}
+
/*
* Transaction based IO.
* The file expects a single write which triggers the transaction, and then
@@ -800,6 +845,7 @@
EXPORT_SYMBOL(simple_sync_file);
EXPORT_SYMBOL(simple_unlink);
EXPORT_SYMBOL(simple_read_from_buffer);
+EXPORT_SYMBOL(memory_read_from_buffer);
EXPORT_SYMBOL(simple_transaction_get);
EXPORT_SYMBOL(simple_transaction_read);
EXPORT_SYMBOL(simple_transaction_release);
diff --git a/fs/locks.c b/fs/locks.c
index 11dbf08..dce8c747 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -561,9 +561,6 @@
/* insert into file's list */
fl->fl_next = *pos;
*pos = fl;
-
- if (fl->fl_ops && fl->fl_ops->fl_insert)
- fl->fl_ops->fl_insert(fl);
}
/*
@@ -586,9 +583,6 @@
fl->fl_fasync = NULL;
}
- if (fl->fl_ops && fl->fl_ops->fl_remove)
- fl->fl_ops->fl_remove(fl);
-
if (fl->fl_nspid) {
put_pid(fl->fl_nspid);
fl->fl_nspid = NULL;
diff --git a/fs/namei.c b/fs/namei.c
index c7e4353..01e67dd 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -581,15 +581,13 @@
int result;
/* make sure the stuff we saved doesn't go away */
- dget(save.dentry);
- mntget(save.mnt);
+ path_get(&save);
result = __link_path_walk(name, nd);
if (result == -ESTALE) {
/* nd->path had been dropped */
nd->path = save;
- dget(nd->path.dentry);
- mntget(nd->path.mnt);
+ path_get(&nd->path);
nd->flags |= LOOKUP_REVAL;
result = __link_path_walk(name, nd);
}
@@ -1216,8 +1214,9 @@
nd->flags = flags;
nd->depth = 0;
- nd->path.mnt = mntget(mnt);
- nd->path.dentry = dget(dentry);
+ nd->path.dentry = dentry;
+ nd->path.mnt = mnt;
+ path_get(&nd->path);
retval = path_walk(name, nd);
if (unlikely(!retval && !audit_dummy_context() && nd->path.dentry &&
@@ -2857,16 +2856,17 @@
{
struct nameidata nd;
void *cookie;
+ int res;
nd.depth = 0;
cookie = dentry->d_inode->i_op->follow_link(dentry, &nd);
- if (!IS_ERR(cookie)) {
- int res = vfs_readlink(dentry, buffer, buflen, nd_get_link(&nd));
- if (dentry->d_inode->i_op->put_link)
- dentry->d_inode->i_op->put_link(dentry, &nd, cookie);
- cookie = ERR_PTR(res);
- }
- return PTR_ERR(cookie);
+ if (IS_ERR(cookie))
+ return PTR_ERR(cookie);
+
+ res = vfs_readlink(dentry, buffer, buflen, nd_get_link(&nd));
+ if (dentry->d_inode->i_op->put_link)
+ dentry->d_inode->i_op->put_link(dentry, &nd, cookie);
+ return res;
}
int vfs_follow_link(struct nameidata *nd, const char *link)
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 58d43da..982a206 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -204,7 +204,7 @@
* Note: assumes we have exclusive access to this mapping either
* through inode->i_mutex or some other mechanism.
*/
- if (page->index == 0 && invalidate_inode_pages2_range(inode->i_mapping, PAGE_CACHE_SIZE, -1) < 0) {
+ if (invalidate_inode_pages2_range(inode->i_mapping, page->index + 1, -1) < 0) {
/* Should never happen */
nfs_zap_mapping(inode, inode->i_mapping);
}
diff --git a/fs/nfs/mount_clnt.c b/fs/nfs/mount_clnt.c
index 49c7cd0..779d2eb 100644
--- a/fs/nfs/mount_clnt.c
+++ b/fs/nfs/mount_clnt.c
@@ -130,10 +130,11 @@
struct mnt_fhstatus *res)
{
struct nfs_fh *fh = res->fh;
+ unsigned size;
if ((res->status = ntohl(*p++)) == 0) {
- int size = ntohl(*p++);
- if (size <= NFS3_FHSIZE) {
+ size = ntohl(*p++);
+ if (size <= NFS3_FHSIZE && size != 0) {
fh->size = size;
memcpy(fh->data, p, size);
} else
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 2a4a024..614efee 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1216,8 +1216,6 @@
{
struct nfs_mount_data *data = (struct nfs_mount_data *)options;
- memset(args, 0, sizeof(*args));
-
if (data == NULL)
goto out_no_data;
@@ -1251,13 +1249,13 @@
case 5:
memset(data->context, 0, sizeof(data->context));
case 6:
- if (data->flags & NFS_MOUNT_VER3)
+ if (data->flags & NFS_MOUNT_VER3) {
+ if (data->root.size > NFS3_FHSIZE || data->root.size == 0)
+ goto out_invalid_fh;
mntfh->size = data->root.size;
- else
+ } else
mntfh->size = NFS2_FHSIZE;
- if (mntfh->size > sizeof(mntfh->data))
- goto out_invalid_fh;
memcpy(mntfh->data, data->root.data, mntfh->size);
if (mntfh->size < sizeof(mntfh->data))
@@ -1585,24 +1583,29 @@
{
struct nfs_server *server = NULL;
struct super_block *s;
- struct nfs_fh mntfh;
- struct nfs_parsed_mount_data data;
+ struct nfs_parsed_mount_data *data;
+ struct nfs_fh *mntfh;
struct dentry *mntroot;
int (*compare_super)(struct super_block *, void *) = nfs_compare_super;
struct nfs_sb_mountdata sb_mntdata = {
.mntflags = flags,
};
- int error;
+ int error = -ENOMEM;
- security_init_mnt_opts(&data.lsm_opts);
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ mntfh = kzalloc(sizeof(*mntfh), GFP_KERNEL);
+ if (data == NULL || mntfh == NULL)
+ goto out_free_fh;
+
+ security_init_mnt_opts(&data->lsm_opts);
/* Validate the mount data */
- error = nfs_validate_mount_data(raw_data, &data, &mntfh, dev_name);
+ error = nfs_validate_mount_data(raw_data, data, mntfh, dev_name);
if (error < 0)
goto out;
/* Get a volume representation */
- server = nfs_create_server(&data, &mntfh);
+ server = nfs_create_server(data, mntfh);
if (IS_ERR(server)) {
error = PTR_ERR(server);
goto out;
@@ -1630,16 +1633,16 @@
if (!s->s_root) {
/* initial superblock/root creation */
- nfs_fill_super(s, &data);
+ nfs_fill_super(s, data);
}
- mntroot = nfs_get_root(s, &mntfh);
+ mntroot = nfs_get_root(s, mntfh);
if (IS_ERR(mntroot)) {
error = PTR_ERR(mntroot);
goto error_splat_super;
}
- error = security_sb_set_mnt_opts(s, &data.lsm_opts);
+ error = security_sb_set_mnt_opts(s, &data->lsm_opts);
if (error)
goto error_splat_root;
@@ -1649,9 +1652,12 @@
error = 0;
out:
- kfree(data.nfs_server.hostname);
- kfree(data.mount_server.hostname);
- security_free_mnt_opts(&data.lsm_opts);
+ kfree(data->nfs_server.hostname);
+ kfree(data->mount_server.hostname);
+ security_free_mnt_opts(&data->lsm_opts);
+out_free_fh:
+ kfree(mntfh);
+ kfree(data);
return error;
out_err_nosb:
@@ -1800,8 +1806,6 @@
struct nfs4_mount_data *data = (struct nfs4_mount_data *)options;
char *c;
- memset(args, 0, sizeof(*args));
-
if (data == NULL)
goto out_no_data;
@@ -1959,26 +1963,31 @@
static int nfs4_get_sb(struct file_system_type *fs_type,
int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt)
{
- struct nfs_parsed_mount_data data;
+ struct nfs_parsed_mount_data *data;
struct super_block *s;
struct nfs_server *server;
- struct nfs_fh mntfh;
+ struct nfs_fh *mntfh;
struct dentry *mntroot;
int (*compare_super)(struct super_block *, void *) = nfs_compare_super;
struct nfs_sb_mountdata sb_mntdata = {
.mntflags = flags,
};
- int error;
+ int error = -ENOMEM;
- security_init_mnt_opts(&data.lsm_opts);
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ mntfh = kzalloc(sizeof(*mntfh), GFP_KERNEL);
+ if (data == NULL || mntfh == NULL)
+ goto out_free_fh;
+
+ security_init_mnt_opts(&data->lsm_opts);
/* Validate the mount data */
- error = nfs4_validate_mount_data(raw_data, &data, dev_name);
+ error = nfs4_validate_mount_data(raw_data, data, dev_name);
if (error < 0)
goto out;
/* Get a volume representation */
- server = nfs4_create_server(&data, &mntfh);
+ server = nfs4_create_server(data, mntfh);
if (IS_ERR(server)) {
error = PTR_ERR(server);
goto out;
@@ -2009,13 +2018,13 @@
nfs4_fill_super(s);
}
- mntroot = nfs4_get_root(s, &mntfh);
+ mntroot = nfs4_get_root(s, mntfh);
if (IS_ERR(mntroot)) {
error = PTR_ERR(mntroot);
goto error_splat_super;
}
- error = security_sb_set_mnt_opts(s, &data.lsm_opts);
+ error = security_sb_set_mnt_opts(s, &data->lsm_opts);
if (error)
goto error_splat_root;
@@ -2025,10 +2034,13 @@
error = 0;
out:
- kfree(data.client_address);
- kfree(data.nfs_server.export_path);
- kfree(data.nfs_server.hostname);
- security_free_mnt_opts(&data.lsm_opts);
+ kfree(data->client_address);
+ kfree(data->nfs_server.export_path);
+ kfree(data->nfs_server.hostname);
+ security_free_mnt_opts(&data->lsm_opts);
+out_free_fh:
+ kfree(mntfh);
+ kfree(data);
return error;
out_free:
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 6d8ace3..f333848 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -739,12 +739,13 @@
}
status = nfs_writepage_setup(ctx, page, offset, count);
- __set_page_dirty_nobuffers(page);
+ if (status < 0)
+ nfs_set_pageerror(page);
+ else
+ __set_page_dirty_nobuffers(page);
dprintk("NFS: nfs_updatepage returns %d (isize %Ld)\n",
status, (long long)i_size_read(inode));
- if (status < 0)
- nfs_set_pageerror(page);
return status;
}
diff --git a/fs/ocfs2/cluster/nodemanager.c b/fs/ocfs2/cluster/nodemanager.c
index cf9401e..cfdb08b 100644
--- a/fs/ocfs2/cluster/nodemanager.c
+++ b/fs/ocfs2/cluster/nodemanager.c
@@ -21,7 +21,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/sysctl.h>
#include <linux/configfs.h>
#include "tcp.h"
@@ -36,65 +35,6 @@
* cluster references throughout where nodes are looked up */
struct o2nm_cluster *o2nm_single_cluster = NULL;
-#define OCFS2_MAX_HB_CTL_PATH 256
-static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl";
-
-static ctl_table ocfs2_nm_table[] = {
- {
- .ctl_name = 1,
- .procname = "hb_ctl_path",
- .data = ocfs2_hb_ctl_path,
- .maxlen = OCFS2_MAX_HB_CTL_PATH,
- .mode = 0644,
- .proc_handler = &proc_dostring,
- .strategy = &sysctl_string,
- },
- { .ctl_name = 0 }
-};
-
-static ctl_table ocfs2_mod_table[] = {
- {
- .ctl_name = FS_OCFS2_NM,
- .procname = "nm",
- .data = NULL,
- .maxlen = 0,
- .mode = 0555,
- .child = ocfs2_nm_table
- },
- { .ctl_name = 0}
-};
-
-static ctl_table ocfs2_kern_table[] = {
- {
- .ctl_name = FS_OCFS2,
- .procname = "ocfs2",
- .data = NULL,
- .maxlen = 0,
- .mode = 0555,
- .child = ocfs2_mod_table
- },
- { .ctl_name = 0}
-};
-
-static ctl_table ocfs2_root_table[] = {
- {
- .ctl_name = CTL_FS,
- .procname = "fs",
- .data = NULL,
- .maxlen = 0,
- .mode = 0555,
- .child = ocfs2_kern_table
- },
- { .ctl_name = 0 }
-};
-
-static struct ctl_table_header *ocfs2_table_header = NULL;
-
-const char *o2nm_get_hb_ctl_path(void)
-{
- return ocfs2_hb_ctl_path;
-}
-EXPORT_SYMBOL_GPL(o2nm_get_hb_ctl_path);
struct o2nm_node *o2nm_get_node_by_num(u8 node_num)
{
@@ -941,9 +881,6 @@
static void __exit exit_o2nm(void)
{
- if (ocfs2_table_header)
- unregister_sysctl_table(ocfs2_table_header);
-
/* XXX sync with hb callbacks and shut down hb? */
o2net_unregister_hb_callbacks();
configfs_unregister_subsystem(&o2nm_cluster_group.cs_subsys);
@@ -964,16 +901,9 @@
if (ret)
goto out;
- ocfs2_table_header = register_sysctl_table(ocfs2_root_table);
- if (!ocfs2_table_header) {
- printk(KERN_ERR "nodemanager: unable to register sysctl\n");
- ret = -ENOMEM; /* or something. */
- goto out_o2net;
- }
-
ret = o2net_register_hb_callbacks();
if (ret)
- goto out_sysctl;
+ goto out_o2net;
config_group_init(&o2nm_cluster_group.cs_subsys.su_group);
mutex_init(&o2nm_cluster_group.cs_subsys.su_mutex);
@@ -990,8 +920,6 @@
configfs_unregister_subsystem(&o2nm_cluster_group.cs_subsys);
out_callbacks:
o2net_unregister_hb_callbacks();
-out_sysctl:
- unregister_sysctl_table(ocfs2_table_header);
out_o2net:
o2net_exit();
out:
diff --git a/fs/ocfs2/cluster/nodemanager.h b/fs/ocfs2/cluster/nodemanager.h
index 7c86036..c992ea0 100644
--- a/fs/ocfs2/cluster/nodemanager.h
+++ b/fs/ocfs2/cluster/nodemanager.h
@@ -33,10 +33,6 @@
#include <linux/configfs.h>
#include <linux/rbtree.h>
-#define FS_OCFS2_NM 1
-
-const char *o2nm_get_hb_ctl_path(void);
-
struct o2nm_node {
spinlock_t nd_lock;
struct config_item nd_item;
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index 1e44ad1..a27d615 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -142,53 +142,43 @@
static void o2net_sc_postpone_idle(struct o2net_sock_container *sc);
static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc);
-static void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
- u32 msgkey, struct task_struct *task, u8 node)
-{
#ifdef CONFIG_DEBUG_FS
+void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+ u32 msgkey, struct task_struct *task, u8 node)
+{
INIT_LIST_HEAD(&nst->st_net_debug_item);
nst->st_task = task;
nst->st_msg_type = msgtype;
nst->st_msg_key = msgkey;
nst->st_node = node;
-#endif
}
-static void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
+void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
{
-#ifdef CONFIG_DEBUG_FS
do_gettimeofday(&nst->st_sock_time);
-#endif
}
-static void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
+void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
{
-#ifdef CONFIG_DEBUG_FS
do_gettimeofday(&nst->st_send_time);
-#endif
}
-static void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
+void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
{
-#ifdef CONFIG_DEBUG_FS
do_gettimeofday(&nst->st_status_time);
-#endif
}
-static void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
struct o2net_sock_container *sc)
{
-#ifdef CONFIG_DEBUG_FS
nst->st_sc = sc;
-#endif
}
-static void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id)
+void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id)
{
-#ifdef CONFIG_DEBUG_FS
nst->st_id = msg_id;
-#endif
}
+#endif /* CONFIG_DEBUG_FS */
static inline int o2net_reconnect_delay(void)
{
diff --git a/fs/ocfs2/cluster/tcp.h b/fs/ocfs2/cluster/tcp.h
index a705d5d..fd6179e 100644
--- a/fs/ocfs2/cluster/tcp.h
+++ b/fs/ocfs2/cluster/tcp.h
@@ -128,23 +128,23 @@
void o2net_debug_add_sc(struct o2net_sock_container *sc);
void o2net_debug_del_sc(struct o2net_sock_container *sc);
#else
-static int o2net_debugfs_init(void)
+static inline int o2net_debugfs_init(void)
{
return 0;
}
-static void o2net_debugfs_exit(void)
+static inline void o2net_debugfs_exit(void)
{
}
-static void o2net_debug_add_nst(struct o2net_send_tracking *nst)
+static inline void o2net_debug_add_nst(struct o2net_send_tracking *nst)
{
}
-static void o2net_debug_del_nst(struct o2net_send_tracking *nst)
+static inline void o2net_debug_del_nst(struct o2net_send_tracking *nst)
{
}
-static void o2net_debug_add_sc(struct o2net_sock_container *sc)
+static inline void o2net_debug_add_sc(struct o2net_sock_container *sc)
{
}
-static void o2net_debug_del_sc(struct o2net_sock_container *sc)
+static inline void o2net_debug_del_sc(struct o2net_sock_container *sc)
{
}
#endif /* CONFIG_DEBUG_FS */
diff --git a/fs/ocfs2/cluster/tcp_internal.h b/fs/ocfs2/cluster/tcp_internal.h
index 8d58cfe..18307ff 100644
--- a/fs/ocfs2/cluster/tcp_internal.h
+++ b/fs/ocfs2/cluster/tcp_internal.h
@@ -224,10 +224,42 @@
struct timeval st_send_time;
struct timeval st_status_time;
};
+
+void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+ u32 msgkey, struct task_struct *task, u8 node);
+void o2net_set_nst_sock_time(struct o2net_send_tracking *nst);
+void o2net_set_nst_send_time(struct o2net_send_tracking *nst);
+void o2net_set_nst_status_time(struct o2net_send_tracking *nst);
+void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+ struct o2net_sock_container *sc);
+void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id);
+
#else
struct o2net_send_tracking {
u32 dummy;
};
+
+static inline void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+ u32 msgkey, struct task_struct *task, u8 node)
+{
+}
+static inline void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
+{
+}
+static inline void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
+{
+}
+static inline void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
+{
+}
+static inline void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+ struct o2net_sock_container *sc)
+{
+}
+static inline void o2net_set_nst_msg_id(struct o2net_send_tracking *nst,
+ u32 msg_id)
+{
+}
#endif /* CONFIG_DEBUG_FS */
#endif /* O2CLUSTER_TCP_INTERNAL_H */
diff --git a/fs/ocfs2/dlm/dlmdebug.h b/fs/ocfs2/dlm/dlmdebug.h
index d34a62a..8c686d2 100644
--- a/fs/ocfs2/dlm/dlmdebug.h
+++ b/fs/ocfs2/dlm/dlmdebug.h
@@ -60,25 +60,25 @@
#else
-static int dlm_debug_init(struct dlm_ctxt *dlm)
+static inline int dlm_debug_init(struct dlm_ctxt *dlm)
{
return 0;
}
-static void dlm_debug_shutdown(struct dlm_ctxt *dlm)
+static inline void dlm_debug_shutdown(struct dlm_ctxt *dlm)
{
}
-static int dlm_create_debugfs_subroot(struct dlm_ctxt *dlm)
+static inline int dlm_create_debugfs_subroot(struct dlm_ctxt *dlm)
{
return 0;
}
-static void dlm_destroy_debugfs_subroot(struct dlm_ctxt *dlm)
+static inline void dlm_destroy_debugfs_subroot(struct dlm_ctxt *dlm)
{
}
-static int dlm_create_debugfs_root(void)
+static inline int dlm_create_debugfs_root(void)
{
return 0;
}
-static void dlm_destroy_debugfs_root(void)
+static inline void dlm_destroy_debugfs_root(void)
{
}
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index efc015c..44f87ca 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -606,7 +606,9 @@
res->last_used = 0;
+ spin_lock(&dlm->spinlock);
list_add_tail(&res->tracking, &dlm->tracking_list);
+ spin_unlock(&dlm->spinlock);
memset(res->lvb, 0, DLM_LVB_LEN);
memset(res->refmap, 0, sizeof(res->refmap));
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 394d25a..80e20d9 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -1554,8 +1554,8 @@
*/
int ocfs2_file_lock(struct file *file, int ex, int trylock)
{
- int ret, level = ex ? LKM_EXMODE : LKM_PRMODE;
- unsigned int lkm_flags = trylock ? LKM_NOQUEUE : 0;
+ int ret, level = ex ? DLM_LOCK_EX : DLM_LOCK_PR;
+ unsigned int lkm_flags = trylock ? DLM_LKF_NOQUEUE : 0;
unsigned long flags;
struct ocfs2_file_private *fp = file->private_data;
struct ocfs2_lock_res *lockres = &fp->fp_flock;
@@ -1582,7 +1582,7 @@
* Get the lock at NLMODE to start - that way we
* can cancel the upconvert request if need be.
*/
- ret = ocfs2_lock_create(osb, lockres, LKM_NLMODE, 0);
+ ret = ocfs2_lock_create(osb, lockres, DLM_LOCK_NL, 0);
if (ret < 0) {
mlog_errno(ret);
goto out;
@@ -1597,7 +1597,7 @@
}
lockres->l_action = OCFS2_AST_CONVERT;
- lkm_flags |= LKM_CONVERT;
+ lkm_flags |= DLM_LKF_CONVERT;
lockres->l_requested = level;
lockres_or_flags(lockres, OCFS2_LOCK_BUSY);
@@ -1664,7 +1664,7 @@
if (!(lockres->l_flags & OCFS2_LOCK_ATTACHED))
return;
- if (lockres->l_level == LKM_NLMODE)
+ if (lockres->l_level == DLM_LOCK_NL)
return;
mlog(0, "Unlock: \"%s\" flags: 0x%lx, level: %d, act: %d\n",
@@ -1678,11 +1678,11 @@
lockres_or_flags(lockres, OCFS2_LOCK_BLOCKED);
lockres->l_blocking = DLM_LOCK_EX;
- gen = ocfs2_prepare_downconvert(lockres, LKM_NLMODE);
+ gen = ocfs2_prepare_downconvert(lockres, DLM_LOCK_NL);
lockres_add_mask_waiter(lockres, &mw, OCFS2_LOCK_BUSY, 0);
spin_unlock_irqrestore(&lockres->l_lock, flags);
- ret = ocfs2_downconvert_lock(osb, lockres, LKM_NLMODE, 0, gen);
+ ret = ocfs2_downconvert_lock(osb, lockres, DLM_LOCK_NL, 0, gen);
if (ret) {
mlog_errno(ret);
return;
diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c
index bbd1667..fcd120f 100644
--- a/fs/ocfs2/stack_o2cb.c
+++ b/fs/ocfs2/stack_o2cb.c
@@ -317,8 +317,7 @@
return rc;
}
-static int o2cb_cluster_disconnect(struct ocfs2_cluster_connection *conn,
- int hangup_pending)
+static int o2cb_cluster_disconnect(struct ocfs2_cluster_connection *conn)
{
struct dlm_ctxt *dlm = conn->cc_lockspace;
struct o2dlm_private *priv = conn->cc_private;
@@ -333,43 +332,6 @@
return 0;
}
-static void o2hb_stop(const char *group)
-{
- int ret;
- char *argv[5], *envp[3];
-
- argv[0] = (char *)o2nm_get_hb_ctl_path();
- argv[1] = "-K";
- argv[2] = "-u";
- argv[3] = (char *)group;
- argv[4] = NULL;
-
- mlog(0, "Run: %s %s %s %s\n", argv[0], argv[1], argv[2], argv[3]);
-
- /* minimal command environment taken from cpu_run_sbin_hotplug */
- envp[0] = "HOME=/";
- envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
- envp[2] = NULL;
-
- ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC);
- if (ret < 0)
- mlog_errno(ret);
-}
-
-/*
- * Hangup is a hack for tools compatibility. Older ocfs2-tools software
- * expects the filesystem to call "ocfs2_hb_ctl" during unmount. This
- * happens regardless of whether the DLM got started, so we can't do it
- * in ocfs2_cluster_disconnect(). We bring the o2hb_stop() function into
- * the glue and provide a "hangup" API for super.c to call.
- *
- * Other stacks will eventually provide a NULL ->hangup() pointer.
- */
-static void o2cb_cluster_hangup(const char *group, int grouplen)
-{
- o2hb_stop(group);
-}
-
static int o2cb_cluster_this_node(unsigned int *node)
{
int node_num;
@@ -388,7 +350,6 @@
static struct ocfs2_stack_operations o2cb_stack_ops = {
.connect = o2cb_cluster_connect,
.disconnect = o2cb_cluster_disconnect,
- .hangup = o2cb_cluster_hangup,
.this_node = o2cb_cluster_this_node,
.dlm_lock = o2cb_dlm_lock,
.dlm_unlock = o2cb_dlm_unlock,
diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c
index b503772..c021280 100644
--- a/fs/ocfs2/stack_user.c
+++ b/fs/ocfs2/stack_user.c
@@ -61,7 +61,7 @@
* negotiated by the client. The client negotiates based on the maximum
* version advertised in /sys/fs/ocfs2/max_locking_protocol. The major
* number from the "SETV" message must match
- * user_stack.sp_proto->lp_max_version.pv_major, and the minor number
+ * ocfs2_user_plugin.sp_proto->lp_max_version.pv_major, and the minor number
* must be less than or equal to ...->lp_max_version.pv_minor.
*
* Once this information has been set, mounts will be allowed. From this
@@ -153,7 +153,7 @@
struct ocfs2_control_message_down u_down;
};
-static struct ocfs2_stack_plugin user_stack;
+static struct ocfs2_stack_plugin ocfs2_user_plugin;
static atomic_t ocfs2_control_opened;
static int ocfs2_control_this_node = -1;
@@ -399,7 +399,7 @@
char *ptr = NULL;
struct ocfs2_control_private *p = file->private_data;
struct ocfs2_protocol_version *max =
- &user_stack.sp_proto->lp_max_version;
+ &ocfs2_user_plugin.sp_proto->lp_max_version;
if (ocfs2_control_get_handshake_state(file) !=
OCFS2_CONTROL_HANDSHAKE_PROTOCOL)
@@ -680,7 +680,7 @@
struct dlm_lksb *lksb = fsdlm_astarg_to_lksb(astarg);
int status = lksb->sb_status;
- BUG_ON(user_stack.sp_proto == NULL);
+ BUG_ON(ocfs2_user_plugin.sp_proto == NULL);
/*
* For now we're punting on the issue of other non-standard errors
@@ -693,16 +693,16 @@
*/
if (status == -DLM_EUNLOCK || status == -DLM_ECANCEL)
- user_stack.sp_proto->lp_unlock_ast(astarg, 0);
+ ocfs2_user_plugin.sp_proto->lp_unlock_ast(astarg, 0);
else
- user_stack.sp_proto->lp_lock_ast(astarg);
+ ocfs2_user_plugin.sp_proto->lp_lock_ast(astarg);
}
static void fsdlm_blocking_ast_wrapper(void *astarg, int level)
{
- BUG_ON(user_stack.sp_proto == NULL);
+ BUG_ON(ocfs2_user_plugin.sp_proto == NULL);
- user_stack.sp_proto->lp_blocking_ast(astarg, level);
+ ocfs2_user_plugin.sp_proto->lp_blocking_ast(astarg, level);
}
static int user_dlm_lock(struct ocfs2_cluster_connection *conn,
@@ -816,8 +816,7 @@
return rc;
}
-static int user_cluster_disconnect(struct ocfs2_cluster_connection *conn,
- int hangup_pending)
+static int user_cluster_disconnect(struct ocfs2_cluster_connection *conn)
{
dlm_release_lockspace(conn->cc_lockspace, 2);
conn->cc_lockspace = NULL;
@@ -838,7 +837,7 @@
return 0;
}
-static struct ocfs2_stack_operations user_stack_ops = {
+static struct ocfs2_stack_operations ocfs2_user_plugin_ops = {
.connect = user_cluster_connect,
.disconnect = user_cluster_disconnect,
.this_node = user_cluster_this_node,
@@ -849,20 +848,20 @@
.dump_lksb = user_dlm_dump_lksb,
};
-static struct ocfs2_stack_plugin user_stack = {
+static struct ocfs2_stack_plugin ocfs2_user_plugin = {
.sp_name = "user",
- .sp_ops = &user_stack_ops,
+ .sp_ops = &ocfs2_user_plugin_ops,
.sp_owner = THIS_MODULE,
};
-static int __init user_stack_init(void)
+static int __init ocfs2_user_plugin_init(void)
{
int rc;
rc = ocfs2_control_init();
if (!rc) {
- rc = ocfs2_stack_glue_register(&user_stack);
+ rc = ocfs2_stack_glue_register(&ocfs2_user_plugin);
if (rc)
ocfs2_control_exit();
}
@@ -870,14 +869,14 @@
return rc;
}
-static void __exit user_stack_exit(void)
+static void __exit ocfs2_user_plugin_exit(void)
{
- ocfs2_stack_glue_unregister(&user_stack);
+ ocfs2_stack_glue_unregister(&ocfs2_user_plugin);
ocfs2_control_exit();
}
MODULE_AUTHOR("Oracle");
MODULE_DESCRIPTION("ocfs2 driver for userspace cluster stacks");
MODULE_LICENSE("GPL");
-module_init(user_stack_init);
-module_exit(user_stack_exit);
+module_init(ocfs2_user_plugin_init);
+module_exit(ocfs2_user_plugin_exit);
diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c
index 119f60c..10e149a 100644
--- a/fs/ocfs2/stackglue.c
+++ b/fs/ocfs2/stackglue.c
@@ -26,6 +26,7 @@
#include <linux/fs.h>
#include <linux/kobject.h>
#include <linux/sysfs.h>
+#include <linux/sysctl.h>
#include "ocfs2_fs.h"
@@ -33,11 +34,13 @@
#define OCFS2_STACK_PLUGIN_O2CB "o2cb"
#define OCFS2_STACK_PLUGIN_USER "user"
+#define OCFS2_MAX_HB_CTL_PATH 256
static struct ocfs2_locking_protocol *lproto;
static DEFINE_SPINLOCK(ocfs2_stack_lock);
static LIST_HEAD(ocfs2_stack_list);
static char cluster_stack_name[OCFS2_STACK_LABEL_LEN + 1];
+static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl";
/*
* The stack currently in use. If not null, active_stack->sp_count > 0,
@@ -349,7 +352,7 @@
BUG_ON(conn == NULL);
- ret = active_stack->sp_ops->disconnect(conn, hangup_pending);
+ ret = active_stack->sp_ops->disconnect(conn);
/* XXX Should we free it anyway? */
if (!ret) {
@@ -362,13 +365,48 @@
}
EXPORT_SYMBOL_GPL(ocfs2_cluster_disconnect);
+/*
+ * Leave the group for this filesystem. This is executed by a userspace
+ * program (stored in ocfs2_hb_ctl_path).
+ */
+static void ocfs2_leave_group(const char *group)
+{
+ int ret;
+ char *argv[5], *envp[3];
+
+ argv[0] = ocfs2_hb_ctl_path;
+ argv[1] = "-K";
+ argv[2] = "-u";
+ argv[3] = (char *)group;
+ argv[4] = NULL;
+
+ /* minimal command environment taken from cpu_run_sbin_hotplug */
+ envp[0] = "HOME=/";
+ envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
+ envp[2] = NULL;
+
+ ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC);
+ if (ret < 0) {
+ printk(KERN_ERR
+ "ocfs2: Error %d running user helper "
+ "\"%s %s %s %s\"\n",
+ ret, argv[0], argv[1], argv[2], argv[3]);
+ }
+}
+
+/*
+ * Hangup is a required post-umount. ocfs2-tools software expects the
+ * filesystem to call "ocfs2_hb_ctl" during unmount. This happens
+ * regardless of whether the DLM got started, so we can't do it
+ * in ocfs2_cluster_disconnect(). The ocfs2_leave_group() function does
+ * the actual work.
+ */
void ocfs2_cluster_hangup(const char *group, int grouplen)
{
BUG_ON(group == NULL);
BUG_ON(group[grouplen] != '\0');
- if (active_stack->sp_ops->hangup)
- active_stack->sp_ops->hangup(group, grouplen);
+ ocfs2_leave_group(group);
/* cluster_disconnect() was called with hangup_pending==1 */
ocfs2_stack_driver_put();
@@ -548,10 +586,83 @@
return ret;
}
+/*
+ * Sysctl bits
+ *
+ * The sysctl lives at /proc/sys/fs/ocfs2/nm/hb_ctl_path. The 'nm' doesn't
+ * make as much sense in a multiple cluster stack world, but it's safer
+ * and easier to preserve the name.
+ */
+
+#define FS_OCFS2_NM 1
+
+static ctl_table ocfs2_nm_table[] = {
+ {
+ .ctl_name = 1,
+ .procname = "hb_ctl_path",
+ .data = ocfs2_hb_ctl_path,
+ .maxlen = OCFS2_MAX_HB_CTL_PATH,
+ .mode = 0644,
+ .proc_handler = &proc_dostring,
+ .strategy = &sysctl_string,
+ },
+ { .ctl_name = 0 }
+};
+
+static ctl_table ocfs2_mod_table[] = {
+ {
+ .ctl_name = FS_OCFS2_NM,
+ .procname = "nm",
+ .data = NULL,
+ .maxlen = 0,
+ .mode = 0555,
+ .child = ocfs2_nm_table
+ },
+ { .ctl_name = 0}
+};
+
+static ctl_table ocfs2_kern_table[] = {
+ {
+ .ctl_name = FS_OCFS2,
+ .procname = "ocfs2",
+ .data = NULL,
+ .maxlen = 0,
+ .mode = 0555,
+ .child = ocfs2_mod_table
+ },
+ { .ctl_name = 0}
+};
+
+static ctl_table ocfs2_root_table[] = {
+ {
+ .ctl_name = CTL_FS,
+ .procname = "fs",
+ .data = NULL,
+ .maxlen = 0,
+ .mode = 0555,
+ .child = ocfs2_kern_table
+ },
+ { .ctl_name = 0 }
+};
+
+static struct ctl_table_header *ocfs2_table_header = NULL;
+
+
+/*
+ * Initialization
+ */
+
static int __init ocfs2_stack_glue_init(void)
{
strcpy(cluster_stack_name, OCFS2_STACK_PLUGIN_O2CB);
+ ocfs2_table_header = register_sysctl_table(ocfs2_root_table);
+ if (!ocfs2_table_header) {
+ printk(KERN_ERR
+ "ocfs2 stack glue: unable to register sysctl\n");
+ return -ENOMEM; /* or something. */
+ }
+
return ocfs2_sysfs_init();
}
@@ -559,6 +670,8 @@
{
lproto = NULL;
ocfs2_sysfs_exit();
+ if (ocfs2_table_header)
+ unregister_sysctl_table(ocfs2_table_header);
}
MODULE_AUTHOR("Oracle");
diff --git a/fs/ocfs2/stackglue.h b/fs/ocfs2/stackglue.h
index 005e4f1..db56281 100644
--- a/fs/ocfs2/stackglue.h
+++ b/fs/ocfs2/stackglue.h
@@ -134,22 +134,10 @@
* be freed. Thus, a stack must not return from ->disconnect()
* until it will no longer reference the conn pointer.
*
- * If hangup_pending is zero, ocfs2_cluster_disconnect() will also
- * be dropping the reference on the module.
+ * Once this call returns, the stack glue will be dropping this
+ * connection's reference on the module.
*/
- int (*disconnect)(struct ocfs2_cluster_connection *conn,
- int hangup_pending);
-
- /*
- * ocfs2_cluster_hangup() exists for compatibility with older
- * ocfs2 tools. Only the classic stack really needs it. As such
- * ->hangup() is not required of all stacks. See the comment by
- * ocfs2_cluster_hangup() for more details.
- *
- * Note that ocfs2_cluster_hangup() can only be called if
- * hangup_pending was passed to ocfs2_cluster_disconnect().
- */
- void (*hangup)(const char *group, int grouplen);
+ int (*disconnect)(struct ocfs2_cluster_connection *conn);
/*
* ->this_node() returns the cluster's unique identifier for the
@@ -258,4 +246,5 @@
/* Used by stack plugins */
int ocfs2_stack_glue_register(struct ocfs2_stack_plugin *plugin);
void ocfs2_stack_glue_unregister(struct ocfs2_stack_plugin *plugin);
+
#endif /* STACKGLUE_H */
diff --git a/fs/open.c b/fs/open.c
index a145008..a99ad09 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -16,6 +16,7 @@
#include <linux/namei.h>
#include <linux/backing-dev.h>
#include <linux/capability.h>
+#include <linux/securebits.h>
#include <linux/security.h>
#include <linux/mount.h>
#include <linux/vfs.h>
@@ -425,7 +426,7 @@
{
struct nameidata nd;
int old_fsuid, old_fsgid;
- kernel_cap_t old_cap;
+ kernel_cap_t uninitialized_var(old_cap); /* !SECURE_NO_SETUID_FIXUP */
int res;
if (mode & ~S_IRWXO) /* where's F_OK, X_OK, W_OK, R_OK? */
@@ -433,23 +434,27 @@
old_fsuid = current->fsuid;
old_fsgid = current->fsgid;
- old_cap = current->cap_effective;
current->fsuid = current->uid;
current->fsgid = current->gid;
- /*
- * Clear the capabilities if we switch to a non-root user
- *
- * FIXME: There is a race here against sys_capset. The
- * capabilities can change yet we will restore the old
- * value below. We should hold task_capabilities_lock,
- * but we cannot because user_path_walk can sleep.
- */
- if (current->uid)
- cap_clear(current->cap_effective);
- else
- current->cap_effective = current->cap_permitted;
+ if (!issecure(SECURE_NO_SETUID_FIXUP)) {
+ /*
+ * Clear the capabilities if we switch to a non-root user
+ */
+#ifndef CONFIG_SECURITY_FILE_CAPABILITIES
+ /*
+ * FIXME: There is a race here against sys_capset. The
+ * capabilities can change yet we will restore the old
+ * value below. We should hold task_capabilities_lock,
+ * but we cannot because user_path_walk can sleep.
+ */
+#endif /* ndef CONFIG_SECURITY_FILE_CAPABILITIES */
+ if (current->uid)
+ old_cap = cap_set_effective(__cap_empty_set);
+ else
+ old_cap = cap_set_effective(current->cap_permitted);
+ }
res = __user_walk_fd(dfd, filename, LOOKUP_FOLLOW|LOOKUP_ACCESS, &nd);
if (res)
@@ -478,7 +483,9 @@
out:
current->fsuid = old_fsuid;
current->fsgid = old_fsgid;
- current->cap_effective = old_cap;
+
+ if (!issecure(SECURE_NO_SETUID_FIXUP))
+ cap_set_effective(old_cap);
return res;
}
diff --git a/fs/pipe.c b/fs/pipe.c
index ec228bc..700f4e0 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -1003,8 +1003,7 @@
void free_write_pipe(struct file *f)
{
free_pipe_info(f->f_dentry->d_inode);
- dput(f->f_path.dentry);
- mntput(f->f_path.mnt);
+ path_put(&f->f_path);
put_filp(f);
}
@@ -1015,8 +1014,8 @@
return ERR_PTR(-ENFILE);
/* Grab pipe from the writer */
- f->f_path.mnt = mntget(wrf->f_path.mnt);
- f->f_path.dentry = dget(wrf->f_path.dentry);
+ f->f_path = wrf->f_path;
+ path_get(&wrf->f_path);
f->f_mapping = wrf->f_path.dentry->d_inode->i_mapping;
f->f_pos = 0;
@@ -1068,8 +1067,7 @@
err_fdr:
put_unused_fd(fdr);
err_read_pipe:
- dput(fr->f_dentry);
- mntput(fr->f_vfsmnt);
+ path_put(&fr->f_path);
put_filp(fr);
err_write_pipe:
free_write_pipe(fw);
diff --git a/fs/proc/array.c b/fs/proc/array.c
index 9e3b8c3..797d775 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -288,7 +288,7 @@
seq_printf(m, "%s", header);
CAP_FOR_EACH_U32(__capi) {
seq_printf(m, "%08x",
- a->cap[(_LINUX_CAPABILITY_U32S-1) - __capi]);
+ a->cap[(_KERNEL_CAPABILITY_U32S-1) - __capi]);
}
seq_printf(m, "\n");
}
diff --git a/fs/proc/base.c b/fs/proc/base.c
index c447e07..3b45537 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -127,6 +127,25 @@
NULL, &proc_single_file_operations, \
{ .proc_show = &proc_##OTYPE } )
+/*
+ * Count the number of hardlinks for the pid_entry table, excluding the .
+ * and .. links.
+ */
+static unsigned int pid_entry_count_dirs(const struct pid_entry *entries,
+ unsigned int n)
+{
+ unsigned int i;
+ unsigned int count;
+
+ count = 0;
+ for (i = 0; i < n; ++i) {
+ if (S_ISDIR(entries[i].mode))
+ ++count;
+ }
+
+ return count;
+}
+
int maps_protect;
EXPORT_SYMBOL(maps_protect);
@@ -2585,10 +2604,9 @@
inode->i_op = &proc_tgid_base_inode_operations;
inode->i_fop = &proc_tgid_base_operations;
inode->i_flags|=S_IMMUTABLE;
- inode->i_nlink = 5;
-#ifdef CONFIG_SECURITY
- inode->i_nlink += 1;
-#endif
+
+ inode->i_nlink = 2 + pid_entry_count_dirs(tgid_base_stuff,
+ ARRAY_SIZE(tgid_base_stuff));
dentry->d_op = &pid_dentry_operations;
@@ -2816,10 +2834,9 @@
inode->i_op = &proc_tid_base_inode_operations;
inode->i_fop = &proc_tid_base_operations;
inode->i_flags|=S_IMMUTABLE;
- inode->i_nlink = 4;
-#ifdef CONFIG_SECURITY
- inode->i_nlink += 1;
-#endif
+
+ inode->i_nlink = 2 + pid_entry_count_dirs(tid_base_stuff,
+ ARRAY_SIZE(tid_base_stuff));
dentry->d_op = &pid_dentry_operations;
diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index 32dc14c..7e277f2 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -716,7 +716,7 @@
pfn = src / KPMSIZE;
count = min_t(size_t, count, (max_pfn * KPMSIZE) - src);
if (src & KPMMASK || count & KPMMASK)
- return -EIO;
+ return -EINVAL;
while (count > 0) {
ppage = NULL;
@@ -726,7 +726,7 @@
if (!ppage)
pcount = 0;
else
- pcount = atomic_read(&ppage->_count);
+ pcount = page_mapcount(ppage);
if (put_user(pcount, out++)) {
ret = -EFAULT;
@@ -782,7 +782,7 @@
pfn = src / KPMSIZE;
count = min_t(unsigned long, count, (max_pfn * KPMSIZE) - src);
if (src & KPMMASK || count & KPMMASK)
- return -EIO;
+ return -EINVAL;
while (count > 0) {
ppage = NULL;
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 88717c0..c492449 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -315,9 +315,9 @@
};
static int smaps_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
- void *private)
+ struct mm_walk *walk)
{
- struct mem_size_stats *mss = private;
+ struct mem_size_stats *mss = walk->private;
struct vm_area_struct *vma = mss->vma;
pte_t *pte, ptent;
spinlock_t *ptl;
@@ -365,19 +365,21 @@
return 0;
}
-static struct mm_walk smaps_walk = { .pmd_entry = smaps_pte_range };
-
static int show_smap(struct seq_file *m, void *v)
{
struct vm_area_struct *vma = v;
struct mem_size_stats mss;
int ret;
+ struct mm_walk smaps_walk = {
+ .pmd_entry = smaps_pte_range,
+ .mm = vma->vm_mm,
+ .private = &mss,
+ };
memset(&mss, 0, sizeof mss);
mss.vma = vma;
if (vma->vm_mm && !is_vm_hugetlb_page(vma))
- walk_page_range(vma->vm_mm, vma->vm_start, vma->vm_end,
- &smaps_walk, &mss);
+ walk_page_range(vma->vm_start, vma->vm_end, &smaps_walk);
ret = show_map(m, v);
if (ret)
@@ -426,9 +428,9 @@
};
static int clear_refs_pte_range(pmd_t *pmd, unsigned long addr,
- unsigned long end, void *private)
+ unsigned long end, struct mm_walk *walk)
{
- struct vm_area_struct *vma = private;
+ struct vm_area_struct *vma = walk->private;
pte_t *pte, ptent;
spinlock_t *ptl;
struct page *page;
@@ -452,8 +454,6 @@
return 0;
}
-static struct mm_walk clear_refs_walk = { .pmd_entry = clear_refs_pte_range };
-
static ssize_t clear_refs_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
@@ -476,11 +476,17 @@
return -ESRCH;
mm = get_task_mm(task);
if (mm) {
+ struct mm_walk clear_refs_walk = {
+ .pmd_entry = clear_refs_pte_range,
+ .mm = mm,
+ };
down_read(&mm->mmap_sem);
- for (vma = mm->mmap; vma; vma = vma->vm_next)
+ for (vma = mm->mmap; vma; vma = vma->vm_next) {
+ clear_refs_walk.private = vma;
if (!is_vm_hugetlb_page(vma))
- walk_page_range(mm, vma->vm_start, vma->vm_end,
- &clear_refs_walk, vma);
+ walk_page_range(vma->vm_start, vma->vm_end,
+ &clear_refs_walk);
+ }
flush_tlb_mm(mm);
up_read(&mm->mmap_sem);
mmput(mm);
@@ -496,7 +502,7 @@
};
struct pagemapread {
- char __user *out, *end;
+ u64 __user *out, *end;
};
#define PM_ENTRY_BYTES sizeof(u64)
@@ -519,28 +525,18 @@
static int add_to_pagemap(unsigned long addr, u64 pfn,
struct pagemapread *pm)
{
- /*
- * Make sure there's room in the buffer for an
- * entire entry. Otherwise, only copy part of
- * the pfn.
- */
- if (pm->out + PM_ENTRY_BYTES >= pm->end) {
- if (copy_to_user(pm->out, &pfn, pm->end - pm->out))
- return -EFAULT;
- pm->out = pm->end;
- return PM_END_OF_BUFFER;
- }
-
if (put_user(pfn, pm->out))
return -EFAULT;
- pm->out += PM_ENTRY_BYTES;
+ pm->out++;
+ if (pm->out >= pm->end)
+ return PM_END_OF_BUFFER;
return 0;
}
static int pagemap_pte_hole(unsigned long start, unsigned long end,
- void *private)
+ struct mm_walk *walk)
{
- struct pagemapread *pm = private;
+ struct pagemapread *pm = walk->private;
unsigned long addr;
int err = 0;
for (addr = start; addr < end; addr += PAGE_SIZE) {
@@ -557,24 +553,45 @@
return swp_type(e) | (swp_offset(e) << MAX_SWAPFILES_SHIFT);
}
-static int pagemap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
- void *private)
+static unsigned long pte_to_pagemap_entry(pte_t pte)
{
- struct pagemapread *pm = private;
+ unsigned long pme = 0;
+ if (is_swap_pte(pte))
+ pme = PM_PFRAME(swap_pte_to_pagemap_entry(pte))
+ | PM_PSHIFT(PAGE_SHIFT) | PM_SWAP;
+ else if (pte_present(pte))
+ pme = PM_PFRAME(pte_pfn(pte))
+ | PM_PSHIFT(PAGE_SHIFT) | PM_PRESENT;
+ return pme;
+}
+
+static int pagemap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
+ struct mm_walk *walk)
+{
+ struct vm_area_struct *vma;
+ struct pagemapread *pm = walk->private;
pte_t *pte;
int err = 0;
+ /* find the first VMA at or above 'addr' */
+ vma = find_vma(walk->mm, addr);
for (; addr != end; addr += PAGE_SIZE) {
u64 pfn = PM_NOT_PRESENT;
- pte = pte_offset_map(pmd, addr);
- if (is_swap_pte(*pte))
- pfn = PM_PFRAME(swap_pte_to_pagemap_entry(*pte))
- | PM_PSHIFT(PAGE_SHIFT) | PM_SWAP;
- else if (pte_present(*pte))
- pfn = PM_PFRAME(pte_pfn(*pte))
- | PM_PSHIFT(PAGE_SHIFT) | PM_PRESENT;
- /* unmap so we're not in atomic when we copy to userspace */
- pte_unmap(pte);
+
+ /* check to see if we've left 'vma' behind
+ * and need a new, higher one */
+ if (vma && (addr >= vma->vm_end))
+ vma = find_vma(walk->mm, addr);
+
+ /* check that 'vma' actually covers this address,
+ * and that it isn't a huge page vma */
+ if (vma && (vma->vm_start <= addr) &&
+ !is_vm_hugetlb_page(vma)) {
+ pte = pte_offset_map(pmd, addr);
+ pfn = pte_to_pagemap_entry(*pte);
+ /* unmap before userspace copy */
+ pte_unmap(pte);
+ }
err = add_to_pagemap(addr, pfn, pm);
if (err)
return err;
@@ -585,11 +602,6 @@
return err;
}
-static struct mm_walk pagemap_walk = {
- .pmd_entry = pagemap_pte_range,
- .pte_hole = pagemap_pte_hole
-};
-
/*
* /proc/pid/pagemap - an array mapping virtual pages to pfns
*
@@ -624,6 +636,11 @@
struct pagemapread pm;
int pagecount;
int ret = -ESRCH;
+ struct mm_walk pagemap_walk;
+ unsigned long src;
+ unsigned long svpfn;
+ unsigned long start_vaddr;
+ unsigned long end_vaddr;
if (!task)
goto out;
@@ -634,7 +651,7 @@
ret = -EINVAL;
/* file position must be aligned */
- if (*ppos % PM_ENTRY_BYTES)
+ if ((*ppos % PM_ENTRY_BYTES) || (count % PM_ENTRY_BYTES))
goto out_task;
ret = 0;
@@ -642,11 +659,15 @@
if (!mm)
goto out_task;
- ret = -ENOMEM;
+
uaddr = (unsigned long)buf & PAGE_MASK;
uend = (unsigned long)(buf + count);
pagecount = (PAGE_ALIGN(uend) - uaddr) / PAGE_SIZE;
- pages = kmalloc(pagecount * sizeof(struct page *), GFP_KERNEL);
+ ret = 0;
+ if (pagecount == 0)
+ goto out_mm;
+ pages = kcalloc(pagecount, sizeof(struct page *), GFP_KERNEL);
+ ret = -ENOMEM;
if (!pages)
goto out_mm;
@@ -664,36 +685,36 @@
goto out_pages;
}
- pm.out = buf;
- pm.end = buf + count;
+ pm.out = (u64 *)buf;
+ pm.end = (u64 *)(buf + count);
- if (!ptrace_may_attach(task)) {
- ret = -EIO;
- } else {
- unsigned long src = *ppos;
- unsigned long svpfn = src / PM_ENTRY_BYTES;
- unsigned long start_vaddr = svpfn << PAGE_SHIFT;
- unsigned long end_vaddr = TASK_SIZE_OF(task);
+ pagemap_walk.pmd_entry = pagemap_pte_range;
+ pagemap_walk.pte_hole = pagemap_pte_hole;
+ pagemap_walk.mm = mm;
+ pagemap_walk.private = ±
- /* watch out for wraparound */
- if (svpfn > TASK_SIZE_OF(task) >> PAGE_SHIFT)
- start_vaddr = end_vaddr;
+ src = *ppos;
+ svpfn = src / PM_ENTRY_BYTES;
+ start_vaddr = svpfn << PAGE_SHIFT;
+ end_vaddr = TASK_SIZE_OF(task);
- /*
- * The odds are that this will stop walking way
- * before end_vaddr, because the length of the
- * user buffer is tracked in "pm", and the walk
- * will stop when we hit the end of the buffer.
- */
- ret = walk_page_range(mm, start_vaddr, end_vaddr,
- &pagemap_walk, &pm);
- if (ret == PM_END_OF_BUFFER)
- ret = 0;
- /* don't need mmap_sem for these, but this looks cleaner */
- *ppos += pm.out - buf;
- if (!ret)
- ret = pm.out - buf;
- }
+ /* watch out for wraparound */
+ if (svpfn > TASK_SIZE_OF(task) >> PAGE_SHIFT)
+ start_vaddr = end_vaddr;
+
+ /*
+ * The odds are that this will stop walking way
+ * before end_vaddr, because the length of the
+ * user buffer is tracked in "pm", and the walk
+ * will stop when we hit the end of the buffer.
+ */
+ ret = walk_page_range(start_vaddr, end_vaddr, &pagemap_walk);
+ if (ret == PM_END_OF_BUFFER)
+ ret = 0;
+ /* don't need mmap_sem for these, but this looks cleaner */
+ *ppos += (char *)pm.out - buf;
+ if (!ret)
+ ret = (char *)pm.out - buf;
out_pages:
for (; pagecount; pagecount--) {
diff --git a/fs/ramfs/file-mmu.c b/fs/ramfs/file-mmu.c
index 9590b90..78f613c 100644
--- a/fs/ramfs/file-mmu.c
+++ b/fs/ramfs/file-mmu.c
@@ -45,6 +45,7 @@
.mmap = generic_file_mmap,
.fsync = simple_sync_file,
.splice_read = generic_file_splice_read,
+ .splice_write = generic_file_splice_write,
.llseek = generic_file_llseek,
};
diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index 0989bc2..52312ec 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -43,6 +43,7 @@
.aio_write = generic_file_aio_write,
.fsync = simple_sync_file,
.splice_read = generic_file_splice_read,
+ .splice_write = generic_file_splice_write,
.llseek = generic_file_llseek,
};
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 5791793..1922696 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -45,6 +45,8 @@
goto out;
reiserfs_update_inode_transaction(inode);
+ reiserfs_discard_prealloc(&th, inode);
+
err = reiserfs_delete_object(&th, inode);
/* Do quota update inside a transaction for journaled quotas. We must do that
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index ed424d7..1d40f2b 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -2165,8 +2165,10 @@
blk++;
}
out:
- if (len == towrite)
+ if (len == towrite) {
+ mutex_unlock(&inode->i_mutex);
return err;
+ }
if (inode->i_size < off + len - towrite)
i_size_write(inode, off + len - towrite);
inode->i_version++;
diff --git a/fs/select.c b/fs/select.c
index 8dda969..da0e882 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -249,7 +249,6 @@
retval++;
}
}
- cond_resched();
}
if (res_in)
*rinp = res_in;
@@ -257,6 +256,7 @@
*routp = res_out;
if (res_ex)
*rexp = res_ex;
+ cond_resched();
}
wait = NULL;
if (retval || !*timeout || signal_pending(current))
diff --git a/fs/splice.c b/fs/splice.c
index aa5f6f6..3994421 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -379,13 +379,22 @@
lock_page(page);
/*
- * page was truncated, stop here. if this isn't the
- * first page, we'll just complete what we already
- * added
+ * Page was truncated, or invalidated by the
+ * filesystem. Redo the find/create, but this time the
+ * page is kept locked, so there's no chance of another
+ * race with truncate/invalidate.
*/
if (!page->mapping) {
unlock_page(page);
- break;
+ page = find_or_create_page(mapping, index,
+ mapping_gfp_mask(mapping));
+
+ if (!page) {
+ error = -ENOMEM;
+ break;
+ }
+ page_cache_release(pages[page_nr]);
+ pages[page_nr] = page;
}
/*
* page was already under io and is now done, great
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 7a5f69b..44cc702 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -682,38 +682,26 @@
/*
* Check whether there is an anchor block in the given block
*/
-static int udf_check_anchor_block(struct super_block *sb, sector_t block,
- bool varconv)
+static int udf_check_anchor_block(struct super_block *sb, sector_t block)
{
- struct buffer_head *bh = NULL;
- tag *t;
+ struct buffer_head *bh;
uint16_t ident;
- uint32_t location;
- if (varconv) {
- if (udf_fixed_to_variable(block) >=
- sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits)
- return 0;
- bh = sb_bread(sb, udf_fixed_to_variable(block));
- }
- else
- bh = sb_bread(sb, block);
+ if (UDF_QUERY_FLAG(sb, UDF_FLAG_VARCONV) &&
+ udf_fixed_to_variable(block) >=
+ sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits)
+ return 0;
+ bh = udf_read_tagged(sb, block, block, &ident);
if (!bh)
return 0;
-
- t = (tag *)bh->b_data;
- ident = le16_to_cpu(t->tagIdent);
- location = le32_to_cpu(t->tagLocation);
brelse(bh);
- if (ident != TAG_IDENT_AVDP)
- return 0;
- return location == block;
+
+ return ident == TAG_IDENT_AVDP;
}
/* Search for an anchor volume descriptor pointer */
-static sector_t udf_scan_anchors(struct super_block *sb, bool varconv,
- sector_t lastblock)
+static sector_t udf_scan_anchors(struct super_block *sb, sector_t lastblock)
{
sector_t last[6];
int i;
@@ -739,7 +727,7 @@
sb->s_blocksize_bits)
continue;
- if (udf_check_anchor_block(sb, last[i], varconv)) {
+ if (udf_check_anchor_block(sb, last[i])) {
sbi->s_anchor[0] = last[i];
sbi->s_anchor[1] = last[i] - 256;
return last[i];
@@ -748,17 +736,17 @@
if (last[i] < 256)
continue;
- if (udf_check_anchor_block(sb, last[i] - 256, varconv)) {
+ if (udf_check_anchor_block(sb, last[i] - 256)) {
sbi->s_anchor[1] = last[i] - 256;
return last[i];
}
}
- if (udf_check_anchor_block(sb, sbi->s_session + 256, varconv)) {
+ if (udf_check_anchor_block(sb, sbi->s_session + 256)) {
sbi->s_anchor[0] = sbi->s_session + 256;
return last[0];
}
- if (udf_check_anchor_block(sb, sbi->s_session + 512, varconv)) {
+ if (udf_check_anchor_block(sb, sbi->s_session + 512)) {
sbi->s_anchor[0] = sbi->s_session + 512;
return last[0];
}
@@ -780,23 +768,24 @@
int i;
struct udf_sb_info *sbi = UDF_SB(sb);
- lastblock = udf_scan_anchors(sb, 0, sbi->s_last_block);
+ lastblock = udf_scan_anchors(sb, sbi->s_last_block);
if (lastblock)
goto check_anchor;
/* No anchor found? Try VARCONV conversion of block numbers */
+ UDF_SET_FLAG(sb, UDF_FLAG_VARCONV);
/* Firstly, we try to not convert number of the last block */
- lastblock = udf_scan_anchors(sb, 1,
+ lastblock = udf_scan_anchors(sb,
udf_variable_to_fixed(sbi->s_last_block));
- if (lastblock) {
- UDF_SET_FLAG(sb, UDF_FLAG_VARCONV);
+ if (lastblock)
goto check_anchor;
- }
/* Secondly, we try with converted number of the last block */
- lastblock = udf_scan_anchors(sb, 1, sbi->s_last_block);
- if (lastblock)
- UDF_SET_FLAG(sb, UDF_FLAG_VARCONV);
+ lastblock = udf_scan_anchors(sb, sbi->s_last_block);
+ if (!lastblock) {
+ /* VARCONV didn't help. Clear it. */
+ UDF_CLEAR_FLAG(sb, UDF_FLAG_VARCONV);
+ }
check_anchor:
/*
diff --git a/fs/udf/udfdecl.h b/fs/udf/udfdecl.h
index 8fa9c2d..8ec865d 100644
--- a/fs/udf/udfdecl.h
+++ b/fs/udf/udfdecl.h
@@ -16,7 +16,7 @@
#define UDF_PREALLOCATE
#define UDF_DEFAULT_PREALLOC_BLOCKS 8
-#define UDFFS_DEBUG
+#undef UDFFS_DEBUG
#ifdef UDFFS_DEBUG
#define udf_debug(f, a...) \
diff --git a/fs/utimes.c b/fs/utimes.c
index af059d5..b6b664e 100644
--- a/fs/utimes.c
+++ b/fs/utimes.c
@@ -40,14 +40,9 @@
#endif
-static bool nsec_special(long nsec)
-{
- return nsec == UTIME_OMIT || nsec == UTIME_NOW;
-}
-
static bool nsec_valid(long nsec)
{
- if (nsec_special(nsec))
+ if (nsec == UTIME_OMIT || nsec == UTIME_NOW)
return true;
return nsec >= 0 && nsec <= 999999999;
@@ -102,7 +97,11 @@
if (error)
goto dput_and_out;
- /* Don't worry, the checks are done in inode_change_ok() */
+ if (times && times[0].tv_nsec == UTIME_NOW &&
+ times[1].tv_nsec == UTIME_NOW)
+ times = NULL;
+
+ /* In most cases, the checks are done in inode_change_ok() */
newattrs.ia_valid = ATTR_CTIME | ATTR_MTIME | ATTR_ATIME;
if (times) {
error = -EPERM;
@@ -124,28 +123,34 @@
newattrs.ia_mtime.tv_nsec = times[1].tv_nsec;
newattrs.ia_valid |= ATTR_MTIME_SET;
}
- }
- /*
- * If times is NULL or both times are either UTIME_OMIT or
- * UTIME_NOW, then need to check permissions, because
- * inode_change_ok() won't do it.
- */
- if (!times || (nsec_special(times[0].tv_nsec) &&
- nsec_special(times[1].tv_nsec))) {
+ /*
+ * For the UTIME_OMIT/UTIME_NOW and UTIME_NOW/UTIME_OMIT
+ * cases, we need to make an extra check that is not done by
+ * inode_change_ok().
+ */
+ if (((times[0].tv_nsec == UTIME_NOW &&
+ times[1].tv_nsec == UTIME_OMIT)
+ ||
+ (times[0].tv_nsec == UTIME_OMIT &&
+ times[1].tv_nsec == UTIME_NOW))
+ && !is_owner_or_cap(inode))
+ goto mnt_drop_write_and_out;
+ } else {
+
+ /*
+ * If times is NULL (or both times are UTIME_NOW),
+ * then we need to check permissions, because
+ * inode_change_ok() won't do it.
+ */
error = -EACCES;
if (IS_IMMUTABLE(inode))
goto mnt_drop_write_and_out;
if (!is_owner_or_cap(inode)) {
- if (f) {
- if (!(f->f_mode & FMODE_WRITE))
- goto mnt_drop_write_and_out;
- } else {
- error = vfs_permission(&nd, MAY_WRITE);
- if (error)
- goto mnt_drop_write_and_out;
- }
+ error = permission(inode, MAY_WRITE, NULL);
+ if (error)
+ goto mnt_drop_write_and_out;
}
}
mutex_lock(&inode->i_mutex);
@@ -169,14 +174,6 @@
if (utimes) {
if (copy_from_user(&tstimes, utimes, sizeof(tstimes)))
return -EFAULT;
- if ((tstimes[0].tv_nsec == UTIME_OMIT ||
- tstimes[0].tv_nsec == UTIME_NOW) &&
- tstimes[0].tv_sec != 0)
- return -EINVAL;
- if ((tstimes[1].tv_nsec == UTIME_OMIT ||
- tstimes[1].tv_nsec == UTIME_NOW) &&
- tstimes[1].tv_sec != 0)
- return -EINVAL;
/* Nothing to do, we must not even check the path. */
if (tstimes[0].tv_nsec == UTIME_OMIT &&
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index afaee30..ad3d26d 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -2427,13 +2427,20 @@
if (iclog->ic_size - iclog->ic_offset < 2*sizeof(xlog_op_header_t)) {
xlog_state_switch_iclogs(log, iclog, iclog->ic_size);
- /* If I'm the only one writing to this iclog, sync it to disk */
- if (atomic_read(&iclog->ic_refcnt) == 1) {
+ /*
+ * If I'm the only one writing to this iclog, sync it to disk.
+ * We need to do an atomic compare and decrement here to avoid
+ * racing with concurrent atomic_dec_and_lock() calls in
+ * xlog_state_release_iclog() when there is more than one
+ * reference to the iclog.
+ */
+ if (!atomic_add_unless(&iclog->ic_refcnt, -1, 1)) {
+ /* we are the only one */
spin_unlock(&log->l_icloglock);
- if ((error = xlog_state_release_iclog(log, iclog)))
+ error = xlog_state_release_iclog(log, iclog);
+ if (error)
return error;
} else {
- atomic_dec(&iclog->ic_refcnt);
spin_unlock(&log->l_icloglock);
}
goto restart;
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 06480bc..06ebb6e 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -319,6 +319,7 @@
#endif /* CONFIG_CPU_FREQ */
/* in processor_throttling.c */
+int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
int acpi_processor_get_throttling_info(struct acpi_processor *pr);
extern int acpi_processor_set_throttling(struct acpi_processor *pr, int state);
extern struct file_operations acpi_processor_throttling_fops;
diff --git a/include/asm-alpha/core_mcpcia.h b/include/asm-alpha/core_mcpcia.h
index 525b4f6..acf55b4 100644
--- a/include/asm-alpha/core_mcpcia.h
+++ b/include/asm-alpha/core_mcpcia.h
@@ -261,7 +261,7 @@
}
#endif
-static inline int __mcpcia_is_mmio(unsigned long addr)
+extern inline int __mcpcia_is_mmio(unsigned long addr)
{
return (addr & 0x80000000UL) == 0;
}
diff --git a/include/asm-alpha/core_t2.h b/include/asm-alpha/core_t2.h
index 90e6b5d..46bfff5 100644
--- a/include/asm-alpha/core_t2.h
+++ b/include/asm-alpha/core_t2.h
@@ -356,13 +356,13 @@
#define vip volatile int *
#define vuip volatile unsigned int *
-static inline u8 t2_inb(unsigned long addr)
+extern inline u8 t2_inb(unsigned long addr)
{
long result = *(vip) ((addr << 5) + T2_IO + 0x00);
return __kernel_extbl(result, addr & 3);
}
-static inline void t2_outb(u8 b, unsigned long addr)
+extern inline void t2_outb(u8 b, unsigned long addr)
{
unsigned long w;
@@ -371,13 +371,13 @@
mb();
}
-static inline u16 t2_inw(unsigned long addr)
+extern inline u16 t2_inw(unsigned long addr)
{
long result = *(vip) ((addr << 5) + T2_IO + 0x08);
return __kernel_extwl(result, addr & 3);
}
-static inline void t2_outw(u16 b, unsigned long addr)
+extern inline void t2_outw(u16 b, unsigned long addr)
{
unsigned long w;
@@ -386,12 +386,12 @@
mb();
}
-static inline u32 t2_inl(unsigned long addr)
+extern inline u32 t2_inl(unsigned long addr)
{
return *(vuip) ((addr << 5) + T2_IO + 0x18);
}
-static inline void t2_outl(u32 b, unsigned long addr)
+extern inline void t2_outl(u32 b, unsigned long addr)
{
*(vuip) ((addr << 5) + T2_IO + 0x18) = b;
mb();
@@ -435,7 +435,7 @@
set_hae(msb); \
}
-static DEFINE_SPINLOCK(t2_hae_lock);
+extern spinlock_t t2_hae_lock;
/*
* NOTE: take T2_DENSE_MEM off in each readX/writeX routine, since
diff --git a/include/asm-alpha/io.h b/include/asm-alpha/io.h
index 38f18cf..e971ab0 100644
--- a/include/asm-alpha/io.h
+++ b/include/asm-alpha/io.h
@@ -35,7 +35,7 @@
* register not being up-to-date with respect to the hardware
* value.
*/
-static inline void __set_hae(unsigned long new_hae)
+extern inline void __set_hae(unsigned long new_hae)
{
unsigned long flags;
local_irq_save(flags);
@@ -49,7 +49,7 @@
local_irq_restore(flags);
}
-static inline void set_hae(unsigned long new_hae)
+extern inline void set_hae(unsigned long new_hae)
{
if (new_hae != alpha_mv.hae_cache)
__set_hae(new_hae);
@@ -176,7 +176,7 @@
#undef REMAP1
#undef REMAP2
-static inline void __iomem *generic_ioportmap(unsigned long a)
+extern inline void __iomem *generic_ioportmap(unsigned long a)
{
return alpha_mv.mv_ioportmap(a);
}
diff --git a/include/asm-alpha/mmu_context.h b/include/asm-alpha/mmu_context.h
index 6a5be1f..86c08a0 100644
--- a/include/asm-alpha/mmu_context.h
+++ b/include/asm-alpha/mmu_context.h
@@ -23,7 +23,7 @@
#endif
-extern inline unsigned long
+static inline unsigned long
__reload_thread(struct pcb_struct *pcb)
{
register unsigned long a0 __asm__("$16");
@@ -114,7 +114,7 @@
#define __MMU_EXTERN_INLINE
#endif
-static inline unsigned long
+extern inline unsigned long
__get_new_mm_context(struct mm_struct *mm, long cpu)
{
unsigned long asn = cpu_last_asn(cpu);
@@ -226,7 +226,7 @@
# endif
#endif
-extern inline int
+static inline int
init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
int i;
diff --git a/include/asm-alpha/percpu.h b/include/asm-alpha/percpu.h
index 48348fe..3495e8e 100644
--- a/include/asm-alpha/percpu.h
+++ b/include/asm-alpha/percpu.h
@@ -1,6 +1,78 @@
#ifndef __ALPHA_PERCPU_H
#define __ALPHA_PERCPU_H
+#include <linux/compiler.h>
+#include <linux/threads.h>
-#include <asm-generic/percpu.h>
+/*
+ * Determine the real variable name from the name visible in the
+ * kernel sources.
+ */
+#define per_cpu_var(var) per_cpu__##var
+
+#ifdef CONFIG_SMP
+
+/*
+ * per_cpu_offset() is the offset that has to be added to a
+ * percpu variable to get to the instance for a certain processor.
+ */
+extern unsigned long __per_cpu_offset[NR_CPUS];
+
+#define per_cpu_offset(x) (__per_cpu_offset[x])
+
+#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id())
+#ifdef CONFIG_DEBUG_PREEMPT
+#define my_cpu_offset per_cpu_offset(smp_processor_id())
+#else
+#define my_cpu_offset __my_cpu_offset
+#endif
+
+#ifndef MODULE
+#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
+#define PER_CPU_ATTRIBUTES
+#else
+/*
+ * To calculate addresses of locally defined variables, GCC uses 32-bit
+ * displacement from the GP. Which doesn't work for per cpu variables in
+ * modules, as an offset to the kernel per cpu area is way above 4G.
+ *
+ * This forces allocation of a GOT entry for per cpu variable using
+ * ldq instruction with a 'literal' relocation.
+ */
+#define SHIFT_PERCPU_PTR(var, offset) ({ \
+ extern int simple_identifier_##var(void); \
+ unsigned long __ptr, tmp_gp; \
+ asm ( "br %1, 1f \n\
+ 1: ldgp %1, 0(%1) \n\
+ ldq %0, per_cpu__" #var"(%1)\t!literal" \
+ : "=&r"(__ptr), "=&r"(tmp_gp)); \
+ (typeof(&per_cpu_var(var)))(__ptr + (offset)); })
+
+#define PER_CPU_ATTRIBUTES __used
+
+#endif /* MODULE */
+
+/*
+ * A percpu variable may point to a discarded regions. The following are
+ * established ways to produce a usable pointer from the percpu variable
+ * offset.
+ */
+#define per_cpu(var, cpu) \
+ (*SHIFT_PERCPU_PTR(var, per_cpu_offset(cpu)))
+#define __get_cpu_var(var) \
+ (*SHIFT_PERCPU_PTR(var, my_cpu_offset))
+#define __raw_get_cpu_var(var) \
+ (*SHIFT_PERCPU_PTR(var, __my_cpu_offset))
+
+#else /* ! SMP */
+
+#define per_cpu(var, cpu) (*((void)(cpu), &per_cpu_var(var)))
+#define __get_cpu_var(var) per_cpu_var(var)
+#define __raw_get_cpu_var(var) per_cpu_var(var)
+
+#define PER_CPU_ATTRIBUTES
+
+#endif /* SMP */
+
+#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name)
#endif /* __ALPHA_PERCPU_H */
diff --git a/include/asm-alpha/system.h b/include/asm-alpha/system.h
index ed221d6..afe20fa 100644
--- a/include/asm-alpha/system.h
+++ b/include/asm-alpha/system.h
@@ -184,7 +184,7 @@
__amask; })
#define __CALL_PAL_R0(NAME, TYPE) \
-static inline TYPE NAME(void) \
+extern inline TYPE NAME(void) \
{ \
register TYPE __r0 __asm__("$0"); \
__asm__ __volatile__( \
@@ -196,7 +196,7 @@
}
#define __CALL_PAL_W1(NAME, TYPE0) \
-static inline void NAME(TYPE0 arg0) \
+extern inline void NAME(TYPE0 arg0) \
{ \
register TYPE0 __r16 __asm__("$16") = arg0; \
__asm__ __volatile__( \
@@ -207,7 +207,7 @@
}
#define __CALL_PAL_W2(NAME, TYPE0, TYPE1) \
-static inline void NAME(TYPE0 arg0, TYPE1 arg1) \
+extern inline void NAME(TYPE0 arg0, TYPE1 arg1) \
{ \
register TYPE0 __r16 __asm__("$16") = arg0; \
register TYPE1 __r17 __asm__("$17") = arg1; \
@@ -219,7 +219,7 @@
}
#define __CALL_PAL_RW1(NAME, RTYPE, TYPE0) \
-static inline RTYPE NAME(TYPE0 arg0) \
+extern inline RTYPE NAME(TYPE0 arg0) \
{ \
register RTYPE __r0 __asm__("$0"); \
register TYPE0 __r16 __asm__("$16") = arg0; \
@@ -232,7 +232,7 @@
}
#define __CALL_PAL_RW2(NAME, RTYPE, TYPE0, TYPE1) \
-static inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1) \
+extern inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1) \
{ \
register RTYPE __r0 __asm__("$0"); \
register TYPE0 __r16 __asm__("$16") = arg0; \
diff --git a/include/asm-alpha/vga.h b/include/asm-alpha/vga.h
index e8df1e7..c00106b 100644
--- a/include/asm-alpha/vga.h
+++ b/include/asm-alpha/vga.h
@@ -13,7 +13,7 @@
#define VT_BUF_HAVE_MEMSETW
#define VT_BUF_HAVE_MEMCPYW
-extern inline void scr_writew(u16 val, volatile u16 *addr)
+static inline void scr_writew(u16 val, volatile u16 *addr)
{
if (__is_ioaddr(addr))
__raw_writew(val, (volatile u16 __iomem *) addr);
@@ -21,7 +21,7 @@
*addr = val;
}
-extern inline u16 scr_readw(volatile const u16 *addr)
+static inline u16 scr_readw(volatile const u16 *addr)
{
if (__is_ioaddr(addr))
return __raw_readw((volatile const u16 __iomem *) addr);
@@ -29,7 +29,7 @@
return *addr;
}
-extern inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
+static inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
{
if (__is_ioaddr(s))
memsetw_io((u16 __iomem *) s, c, count);
diff --git a/include/asm-arm/arch-at91/io.h b/include/asm-arm/arch-at91/io.h
index 80073fd..f8beaa2 100644
--- a/include/asm-arm/arch-at91/io.h
+++ b/include/asm-arm/arch-at91/io.h
@@ -21,8 +21,6 @@
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
-#include <asm/io.h>
-
#define IO_SPACE_LIMIT 0xFFFFFFFF
#define __io(a) ((void __iomem *)(a))
diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/include/asm-arm/arch-pxa/mfp-pxa27x.h
index eb6eaa1..bc73ab8 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa27x.h
+++ b/include/asm-arm/arch-pxa/mfp-pxa27x.h
@@ -112,6 +112,7 @@
#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1)
#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1)
#define GPIO79_PSKTSEL MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
+#define GPIO104_PSKTSEL MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
/* I2C */
#define GPIO117_I2C_SCL MFP_CFG_IN(GPIO117, AF1)
diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h
index 763313c..b81cd63 100644
--- a/include/asm-arm/arch-pxa/pxa2xx-gpio.h
+++ b/include/asm-arm/arch-pxa/pxa2xx-gpio.h
@@ -134,7 +134,11 @@
#define GPIO93_CIF_DD_6 93 /* Camera data pin 6 */
#define GPIO94_CIF_DD_5 94 /* Camera data pin 5 */
#define GPIO95_CIF_DD_4 95 /* Camera data pin 4 */
+#define GPIO96_FFRXD 96 /* FFUART recieve */
+#define GPIO98_FFRTS 98 /* FFUART request to send */
#define GPIO98_CIF_DD_0 98 /* Camera data pin 0 */
+#define GPIO99_FFTXD 99 /* FFUART transmit data */
+#define GPIO100_FFCTS 100 /* FFUART Clear to send */
#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */
#define GPIO103_CIF_DD_3 103 /* Camera data pin 3 */
#define GPIO104_CIF_DD_2 104 /* Camera data pin 2 */
@@ -316,6 +320,8 @@
#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT)
#define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN)
#define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT)
+#define GPIO88_USBH1_PWR_MD (88 | GPIO_ALT_FN_1_IN)
+#define GPIO89_USBH1_PEN_MD (89 | GPIO_ALT_FN_2_OUT)
#define GPIO90_CIF_DD_4_MD (90 | GPIO_ALT_FN_3_IN)
#define GPIO91_CIF_DD_5_MD (91 | GPIO_ALT_FN_3_IN)
#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT)
@@ -324,8 +330,11 @@
#define GPIO95_CIF_DD_4_MD (95 | GPIO_ALT_FN_2_IN)
#define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN)
#define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN)
+#define GPIO96_FFRXD_MD (96 | GPIO_ALT_FN_3_IN)
#define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN)
#define GPIO98_CIF_DD_0_MD (98 | GPIO_ALT_FN_2_IN)
+#define GPIO98_FFRTS_MD (98 | GPIO_ALT_FN_3_OUT)
+#define GPIO99_FFTXD_MD (99 | GPIO_ALT_FN_3_OUT)
#define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN)
#define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN)
#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT)
diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/include/asm-arm/arch-pxa/regs-lcd.h
index f762493..3ba464c9 100644
--- a/include/asm-arm/arch-pxa/regs-lcd.h
+++ b/include/asm-arm/arch-pxa/regs-lcd.h
@@ -1,5 +1,8 @@
#ifndef __ASM_ARCH_REGS_LCD_H
#define __ASM_ARCH_REGS_LCD_H
+
+#include <asm/arch/bitfield.h>
+
/*
* LCD Controller Registers and Bits Definitions
*/
@@ -69,7 +72,7 @@
#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */
#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */
#define LCCR0_PDD_S 12
-#define LCCR0_BM (1 << 20) /* Branch mask */
+#define LCCR0_BM (1 << 20) /* Branch mask */
#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */
#define LCCR0_LCDT (1 << 22) /* LCD panel type */
#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */
diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h
index 2e5868b..386fcc1 100644
--- a/include/asm-arm/pgtable-nommu.h
+++ b/include/asm-arm/pgtable-nommu.h
@@ -16,7 +16,6 @@
#include <linux/slab.h>
#include <asm/processor.h>
#include <asm/page.h>
-#include <asm/io.h>
/*
* Trivial page table functions.
diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h
index 800ba52..2b41ebb 100644
--- a/include/asm-arm/spinlock.h
+++ b/include/asm-arm/spinlock.h
@@ -142,7 +142,7 @@
}
/* write_can_lock - would write_trylock() succeed? */
-#define __raw_write_can_lock(x) ((x)->lock == 0x80000000)
+#define __raw_write_can_lock(x) ((x)->lock == 0)
/*
* Read locks are a bit more hairy:
diff --git a/include/asm-avr32/setup.h b/include/asm-avr32/setup.h
index ea3070f..ff5b7cf 100644
--- a/include/asm-avr32/setup.h
+++ b/include/asm-avr32/setup.h
@@ -2,7 +2,7 @@
* Copyright (C) 2004-2006 Atmel Corporation
*
* Based on linux/include/asm-arm/setup.h
- * Copyright (C) 1997-1999 Russel King
+ * Copyright (C) 1997-1999 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h
index a9248d8..7603383 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/include/asm-blackfin/bfin-global.h
@@ -105,13 +105,6 @@
extern void *sram_alloc_with_lsl(size_t, unsigned long);
extern int sram_free_with_lsl(const void*);
-extern void led_on(int);
-extern void led_off(int);
-extern void led_toggle(int);
-extern void led_disp_num(int);
-extern void led_toggle_num(int);
-extern void init_leds(void);
-
extern const char bfin_board_name[];
extern unsigned long wall_jiffies;
diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h
index 735fa02..4725268 100644
--- a/include/asm-blackfin/mach-bf527/anomaly.h
+++ b/include/asm-blackfin/mach-bf527/anomaly.h
@@ -15,12 +15,16 @@
/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (1)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
#define ANOMALY_05000265 (1)
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
/* Incorrect Access of OTP_STATUS During otp_write() Function */
#define ANOMALY_05000328 (1)
/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
@@ -92,7 +96,6 @@
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000311 (0)
-#define ANOMALY_05000312 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000363 (0)
diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
index 26e3c80..2526b6e 100644
--- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
@@ -90,7 +96,7 @@
struct work_struct tx_dma_workqueue;
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- struct work_struct cts_workqueue;
+ struct timer_list cts_timer;
int cts_pin;
int rts_pin;
#endif
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h
index 5a6dcc5..8f7ea11 100644
--- a/include/asm-blackfin/mach-bf533/anomaly.h
+++ b/include/asm-blackfin/mach-bf533/anomaly.h
@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf533/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@@ -176,6 +176,21 @@
#define ANOMALY_05000315 (1)
/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
#define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* UART Break Signal Issues */
+#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
+/* PPI Does Not Start Properly In Specific Mode */
+#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
+
/* These anomalies have been "phased" out of analog.com anomaly sheets and are
* here to show running on older silicon just isn't feasible.
@@ -249,20 +264,6 @@
#define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
/* Internal Voltage Regulator may not start up */
#define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
-/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (1)
-/* UART Break Signal Issues */
-#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
-/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
-#define ANOMALY_05000366 (1)
-/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
-/* PPI Does Not Start Properly In Specific Mode */
-#define ANOMALY_05000400 (__SILICON_REVISION__ == 5)
-/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ == 5)
-/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
-#define ANOMALY_05000403 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000266 (0)
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
index d016603..ebf592b 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#ifdef CONFIG_BFIN_UART0_CTSRTS
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
@@ -82,7 +88,7 @@
# endif
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- struct work_struct cts_workqueue;
+ struct timer_list cts_timer;
int cts_pin;
int rts_pin;
#endif
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h
index a6b08fa..8460ab9 100644
--- a/include/asm-blackfin/mach-bf537/anomaly.h
+++ b/include/asm-blackfin/mach-bf537/anomaly.h
@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf537/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@@ -132,8 +132,8 @@
#define ANOMALY_05000322 (1)
/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
#define ANOMALY_05000341 (__SILICON_REVISION__ >= 3)
-/* New Feature: UART Remains Enabled after UART Boot (Not Available on Older Silicon) */
-#define ANOMALY_05000350 (__SILICON_REVISION__ < 3)
+/* New Feature: UART Remains Enabled after UART Boot */
+#define ANOMALY_05000350 (__SILICON_REVISION__ >= 3)
/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
#define ANOMALY_05000355 (1)
/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
@@ -145,12 +145,10 @@
/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
#define ANOMALY_05000371 (1)
/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ >= 3)
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
#define ANOMALY_05000403 (1)
-
-
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
#define ANOMALY_05000158 (0)
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
index f79d1a0..1bf56ff 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
@@ -90,7 +96,7 @@
struct work_struct tx_dma_workqueue;
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- struct work_struct cts_workqueue;
+ struct timer_list cts_timer;
int cts_pin;
int rts_pin;
#endif
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
index 49d3ceb..3ad5965 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -75,6 +75,8 @@
#define ANOMALY_05000365 (1)
/* Addressing Conflict between Boot ROM and Asynchronous Memory */
#define ANOMALY_05000369 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
/* Mobile DDR Operation Not Functional */
#define ANOMALY_05000377 (1)
/* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 5eb46a7..5e29446 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -57,6 +57,12 @@
#define UART_SET_DLAB(uart) /* MMRs not muxed on BF54x */
#define UART_CLEAR_DLAB(uart) /* MMRs not muxed on BF54x */
+#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS)
+#define UART_SET_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS))
+#define UART_CLEAR_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) & ~MRTS))
+#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
@@ -93,7 +99,7 @@
struct work_struct tx_dma_workqueue;
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- struct work_struct cts_workqueue;
+ struct timer_list cts_timer;
int cts_pin;
int rts_pin;
#endif
@@ -181,7 +187,7 @@
#ifdef CONFIG_BFIN_UART1_CTSRTS
peripheral_request(P_UART1_RTS, DRIVER_NAME);
- peripheral_request(P_UART1_CTS DRIVER_NAME);
+ peripheral_request(P_UART1_CTS, DRIVER_NAME);
#endif
#endif
@@ -196,7 +202,7 @@
#ifdef CONFIG_BFIN_UART3_CTSRTS
peripheral_request(P_UART3_RTS, DRIVER_NAME);
- peripheral_request(P_UART3_CTS DRIVER_NAME);
+ peripheral_request(P_UART3_CTS, DRIVER_NAME);
#endif
#endif
SSYNC();
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h
index 82157ca..5c5d7d7 100644
--- a/include/asm-blackfin/mach-bf561/anomaly.h
+++ b/include/asm-blackfin/mach-bf561/anomaly.h
@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf561/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
index 7a96287..8aa0278 100644
--- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#ifdef CONFIG_BFIN_UART0_CTSRTS
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
@@ -82,7 +88,7 @@
# endif
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- struct work_struct cts_workqueue;
+ struct timer_list cts_timer;
int cts_pin;
int rts_pin;
#endif
diff --git a/include/asm-frv/checksum.h b/include/asm-frv/checksum.h
index 9b16898..269da09 100644
--- a/include/asm-frv/checksum.h
+++ b/include/asm-frv/checksum.h
@@ -75,7 +75,7 @@
: "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (inc), "=&r"(tmp)
: "0" (sum), "1" (iph), "2" (ihl), "3" (4),
"m"(*(volatile struct { int _[100]; } *)iph)
- : "icc0", "icc1"
+ : "icc0", "icc1", "memory"
);
return (__force __sum16)~sum;
diff --git a/include/asm-frv/system.h b/include/asm-frv/system.h
index d3a12a9..7742ec0 100644
--- a/include/asm-frv/system.h
+++ b/include/asm-frv/system.h
@@ -87,7 +87,7 @@
} while(0)
#define irqs_disabled() \
- ({unsigned long flags; local_save_flags(flags); flags; })
+ ({unsigned long flags; local_save_flags(flags); !!flags; })
#define local_irq_save(flags) \
do { \
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
index 92a6d91..7cd25b8 100644
--- a/include/asm-generic/Kbuild.asm
+++ b/include/asm-generic/Kbuild.asm
@@ -1,6 +1,6 @@
header-y += kvm.h
-ifeq ($(wildcard include/asm-$(SRCARCH)/a.out.h),include/asm-$(SRCARCH)/a.out.h)
+ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
unifdef-y += a.out.h
endif
unifdef-y += auxvec.h
diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h
index 85fd0aa..4ec0a29 100644
--- a/include/asm-generic/atomic.h
+++ b/include/asm-generic/atomic.h
@@ -2,7 +2,7 @@
#define _ASM_GENERIC_ATOMIC_H
/*
* Copyright (C) 2005 Silicon Graphics, Inc.
- * Christoph Lameter <clameter@sgi.com>
+ * Christoph Lameter
*
* Allows to provide arch independent atomic definitions without the need to
* edit all arch specific atomic.h files.
diff --git a/include/asm-h8300/cacheflush.h b/include/asm-h8300/cacheflush.h
index 71210d1..5ffdca2 100644
--- a/include/asm-h8300/cacheflush.h
+++ b/include/asm-h8300/cacheflush.h
@@ -3,7 +3,7 @@
*/
#ifndef _ASM_H8300_CACHEFLUSH_H
-#define _AMS_H8300_CACHEFLUSH_H
+#define _ASM_H8300_CACHEFLUSH_H
/*
* Cache handling functions
diff --git a/include/asm-ia64/sn/simulator.h b/include/asm-ia64/sn/simulator.h
index c3fd3eb..c2611f6 100644
--- a/include/asm-ia64/sn/simulator.h
+++ b/include/asm-ia64/sn/simulator.h
@@ -8,7 +8,7 @@
#ifndef _ASM_IA64_SN_SIMULATOR_H
#define _ASM_IA64_SN_SIMULATOR_H
-
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_SGI_UV)
#define SNMAGIC 0xaeeeeeee8badbeefL
#define IS_MEDUSA() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;})
@@ -16,5 +16,10 @@
#define IS_RUNNING_ON_SIMULATOR() (sn_prom_type)
#define IS_RUNNING_ON_FAKE_PROM() (sn_prom_type == 2)
extern int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
+#else
+#define IS_MEDUSA() 0
+#define SIMULATOR_SLEEP()
+#define IS_RUNNING_ON_SIMULATOR() 0
+#endif
#endif /* _ASM_IA64_SN_SIMULATOR_H */
diff --git a/include/asm-m32r/uaccess.h b/include/asm-m32r/uaccess.h
index bd8c837..1c7047b 100644
--- a/include/asm-m32r/uaccess.h
+++ b/include/asm-m32r/uaccess.h
@@ -14,6 +14,7 @@
#include <linux/errno.h>
#include <linux/thread_info.h>
#include <asm/page.h>
+#include <asm/setup.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
@@ -106,7 +107,6 @@
#else
static inline int access_ok(int type, const void *addr, unsigned long size)
{
- extern unsigned long memory_start, memory_end;
unsigned long val = (unsigned long)addr;
return ((val >= memory_start) && ((val + size) < memory_end));
diff --git a/include/asm-m68k/bitops.h b/include/asm-m68k/bitops.h
index 83d1f28..3e81064 100644
--- a/include/asm-m68k/bitops.h
+++ b/include/asm-m68k/bitops.h
@@ -410,8 +410,49 @@
res = ext2_find_first_zero_bit (p, size - 32 * (p - addr));
return (p - addr) * 32 + res;
}
-#define ext2_find_next_bit(addr, size, off) \
- generic_find_next_le_bit((unsigned long *)(addr), (size), (off))
+
+static inline int ext2_find_first_bit(const void *vaddr, unsigned size)
+{
+ const unsigned long *p = vaddr, *addr = vaddr;
+ int res;
+
+ if (!size)
+ return 0;
+
+ size = (size >> 5) + ((size & 31) > 0);
+ while (*p++ == 0UL) {
+ if (--size == 0)
+ return (p - addr) << 5;
+ }
+
+ --p;
+ for (res = 0; res < 32; res++)
+ if (ext2_test_bit(res, p))
+ break;
+ return (p - addr) * 32 + res;
+}
+
+static inline int ext2_find_next_bit(const void *vaddr, unsigned size,
+ unsigned offset)
+{
+ const unsigned long *addr = vaddr;
+ const unsigned long *p = addr + (offset >> 5);
+ int bit = offset & 31UL, res;
+
+ if (offset >= size)
+ return size;
+
+ if (bit) {
+ /* Look for one in first longword */
+ for (res = bit; res < 32; res++)
+ if (ext2_test_bit(res, p))
+ return (p - addr) * 32 + res;
+ p++;
+ }
+ /* No set bit yet, search remaining full bytes for a set bit */
+ res = ext2_find_first_bit(p, size - 32 * (p - addr));
+ return (p - addr) * 32 + res;
+}
#endif /* __KERNEL__ */
diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h
index a798d62..1232be3 100644
--- a/include/asm-mips/atomic.h
+++ b/include/asm-mips/atomic.h
@@ -283,10 +283,10 @@
" beqz %0, 2f \n"
" subu %0, %1, %3 \n"
" .set reorder \n"
- "1: \n"
" .subsection 2 \n"
"2: b 1b \n"
" .previous \n"
+ "1: \n"
" .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
@@ -664,10 +664,10 @@
" beqz %0, 2f \n"
" dsubu %0, %1, %3 \n"
" .set reorder \n"
- "1: \n"
" .subsection 2 \n"
"2: b 1b \n"
" .previous \n"
+ "1: \n"
" .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
diff --git a/include/asm-mips/cpu-info.h b/include/asm-mips/cpu-info.h
index 0c5a358..2de73db 100644
--- a/include/asm-mips/cpu-info.h
+++ b/include/asm-mips/cpu-info.h
@@ -56,7 +56,7 @@
struct cache_desc tcache; /* Tertiary/split secondary cache */
int srsets; /* Shadow register sets */
int core; /* physical core number */
-#if defined(CONFIG_MIPS_MT_SMTC)
+#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
/*
* In the MIPS MT "SMTC" model, each TC is considered
* to be a "CPU" for the purposes of scheduling, but
@@ -64,7 +64,7 @@
* to all TCs within the same VPE.
*/
int vpe_id; /* Virtual Processor number */
-#endif /* CONFIG_MIPS_MT */
+#endif
#ifdef CONFIG_MIPS_MT_SMTC
int tc_id; /* Thread Context number */
#endif
diff --git a/include/asm-mips/gic.h b/include/asm-mips/gic.h
index 3a492f2..954807d 100644
--- a/include/asm-mips/gic.h
+++ b/include/asm-mips/gic.h
@@ -24,8 +24,8 @@
#define MSK(n) ((1 << (n)) - 1)
#define REG32(addr) (*(volatile unsigned int *) (addr))
-#define REG(base, offs) REG32((unsigned int)(base) + offs##_##OFS)
-#define REGP(base, phys) REG32((unsigned int)(base) + (phys))
+#define REG(base, offs) REG32((unsigned long)(base) + offs##_##OFS)
+#define REGP(base, phys) REG32((unsigned long)(base) + (phys))
/* Accessors */
#define GIC_REG(segment, offset) \
diff --git a/include/asm-mips/lasat/serial.h b/include/asm-mips/lasat/serial.h
index bafe68b..1c37d70 100644
--- a/include/asm-mips/lasat/serial.h
+++ b/include/asm-mips/lasat/serial.h
@@ -4,10 +4,10 @@
#define LASAT_BASE_BAUD_100 (7372800 / 16)
#define LASAT_UART_REGS_BASE_100 0x1c8b0000
#define LASAT_UART_REGS_SHIFT_100 2
-#define LASATINT_UART_100 8
+#define LASATINT_UART_100 16
/* * LASAT 200 boards serial configuration */
#define LASAT_BASE_BAUD_200 (100000000 / 16 / 12)
#define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300)
#define LASAT_UART_REGS_SHIFT_200 3
-#define LASATINT_UART_200 13
+#define LASATINT_UART_200 21
diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h
index 1b5064d..0d302ba 100644
--- a/include/asm-mips/mach-au1x00/au1000.h
+++ b/include/asm-mips/mach-au1x00/au1000.h
@@ -615,6 +615,7 @@
AU1000_RTC_MATCH1_INT,
AU1000_RTC_MATCH2_INT,
AU1500_PCI_ERR_INT,
+ AU1500_RESERVED_INT,
AU1000_USB_DEV_REQ_INT,
AU1000_USB_DEV_SUS_INT,
AU1000_USB_HOST_INT,
diff --git a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
index ad17d7c..44a67bf 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
@@ -355,6 +355,7 @@
u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr);
u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
+extern void au1xxx_ddma_del_device(u32 devid);
void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
/*
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index aa17f65..a46f8e2 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -765,6 +765,9 @@
#define read_c0_index() __read_32bit_c0_register($0, 0)
#define write_c0_index(val) __write_32bit_c0_register($0, 0, val)
+#define read_c0_random() __read_32bit_c0_register($1, 0)
+#define write_c0_random(val) __write_32bit_c0_register($1, 0, val)
+
#define read_c0_entrylo0() __read_ulong_c0_register($2, 0)
#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val)
diff --git a/include/asm-mips/pgtable-bits.h b/include/asm-mips/pgtable-bits.h
index 60e2f93..51b34a4 100644
--- a/include/asm-mips/pgtable-bits.h
+++ b/include/asm-mips/pgtable-bits.h
@@ -134,6 +134,4 @@
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK)
-#define CONF_CM_DEFAULT (PAGE_CACHABLE_DEFAULT>>_CACHE_SHIFT)
-
#endif /* _ASM_PGTABLE_BITS_H */
diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h
index 2f597ee..6a0edf7 100644
--- a/include/asm-mips/pgtable.h
+++ b/include/asm-mips/pgtable.h
@@ -239,9 +239,10 @@
static inline pte_t pte_mkyoung(pte_t pte)
{
pte.pte_low |= _PAGE_ACCESSED;
- if (pte.pte_low & _PAGE_READ)
+ if (pte.pte_low & _PAGE_READ) {
pte.pte_low |= _PAGE_SILENT_READ;
pte.pte_high |= _PAGE_SILENT_READ;
+ }
return pte;
}
#else
diff --git a/include/asm-mips/rtlx.h b/include/asm-mips/rtlx.h
index 20b6660..4ca3063 100644
--- a/include/asm-mips/rtlx.h
+++ b/include/asm-mips/rtlx.h
@@ -3,7 +3,7 @@
*
*/
-#ifndef __ASM_RTLX_H
+#ifndef __ASM_RTLX_H_
#define __ASM_RTLX_H_
#include <irq.h>
diff --git a/include/asm-parisc/checksum.h b/include/asm-parisc/checksum.h
index cc3ec1b..e9639cc 100644
--- a/include/asm-parisc/checksum.h
+++ b/include/asm-parisc/checksum.h
@@ -65,7 +65,7 @@
"2:\n"
: "=r" (sum), "=r" (iph), "=r" (ihl)
: "1" (iph), "2" (ihl)
- : "r19", "r20", "r21" );
+ : "r19", "r20", "r21", "memory");
return (__force __sum16)sum;
}
diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild
index 7381916..bca352e 100644
--- a/include/asm-powerpc/Kbuild
+++ b/include/asm-powerpc/Kbuild
@@ -1,6 +1,5 @@
include include/asm-generic/Kbuild.asm
-header-y += a.out.h
header-y += auxvec.h
header-y += ioctls.h
header-y += mman.h
diff --git a/include/asm-powerpc/hugetlb.h b/include/asm-powerpc/hugetlb.h
index 649c6c3..be32ff0 100644
--- a/include/asm-powerpc/hugetlb.h
+++ b/include/asm-powerpc/hugetlb.h
@@ -49,12 +49,6 @@
return pte_wrprotect(pte);
}
-static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
- unsigned long addr, pte_t *ptep)
-{
- ptep_set_wrprotect(mm, addr, ptep);
-}
-
static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep,
pte_t pte, int dirty)
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
index e0062d7..8918948 100644
--- a/include/asm-powerpc/io.h
+++ b/include/asm-powerpc/io.h
@@ -100,7 +100,7 @@
{ \
type ret; \
__asm__ __volatile__("sync;" insn ";twi 0,%0,0;isync" \
- : "=r" (ret) : "r" (addr), "m" (*addr)); \
+ : "=r" (ret) : "r" (addr), "m" (*addr) : "memory"); \
return ret; \
}
@@ -108,8 +108,8 @@
static inline void name(volatile type __iomem *addr, type val) \
{ \
__asm__ __volatile__("sync;" insn \
- : "=m" (*addr) : "r" (val), "r" (addr)); \
- IO_SET_SYNC_FLAG(); \
+ : "=m" (*addr) : "r" (val), "r" (addr) : "memory"); \
+ IO_SET_SYNC_FLAG(); \
}
@@ -333,7 +333,8 @@
" .long 3b,5b\n" \
".previous" \
: "=&r" (x) \
- : "r" (port + _IO_BASE)); \
+ : "r" (port + _IO_BASE) \
+ : "memory"); \
return x; \
}
@@ -350,7 +351,8 @@
" .long 0b,2b\n" \
" .long 1b,2b\n" \
".previous" \
- : : "r" (val), "r" (port + _IO_BASE)); \
+ : : "r" (val), "r" (port + _IO_BASE) \
+ : "memory"); \
}
__do_in_asm(_rec_inb, "lbzx")
diff --git a/include/asm-powerpc/kvm_ppc.h b/include/asm-powerpc/kvm_ppc.h
index b35a7e3..5a21115 100644
--- a/include/asm-powerpc/kvm_ppc.h
+++ b/include/asm-powerpc/kvm_ppc.h
@@ -57,6 +57,7 @@
extern int kvmppc_emulate_instruction(struct kvm_run *run,
struct kvm_vcpu *vcpu);
+extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu);
extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn,
u64 asid, u32 flags);
diff --git a/include/asm-powerpc/mediabay.h b/include/asm-powerpc/mediabay.h
index df111c3..b2efb33 100644
--- a/include/asm-powerpc/mediabay.h
+++ b/include/asm-powerpc/mediabay.h
@@ -17,8 +17,6 @@
#define MB_POWER 6 /* media bay contains a Power device (???) */
#define MB_NO 7 /* media bay contains nothing */
-int check_media_bay(struct device_node *which_bay, int what);
-
/* Number of bays in the machine or 0 */
extern int media_bay_count;
@@ -29,6 +27,16 @@
/* called by IDE PMAC host driver to register IDE controller for media bay */
int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base,
int irq, ide_hwif_t *hwif);
+
+int check_media_bay(struct device_node *which_bay, int what);
+
+#else
+
+static inline int check_media_bay(struct device_node *which_bay, int what)
+{
+ return -ENODEV;
+}
+
#endif
#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h
index cc6a43b..7686569 100644
--- a/include/asm-powerpc/pgtable-ppc64.h
+++ b/include/asm-powerpc/pgtable-ppc64.h
@@ -314,6 +314,16 @@
old = pte_update(mm, addr, ptep, _PAGE_RW, 0);
}
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ unsigned long old;
+
+ if ((pte_val(*ptep) & _PAGE_RW) == 0)
+ return;
+ old = pte_update(mm, addr, ptep, _PAGE_RW, 1);
+}
+
/*
* We currently remove entries from the hashtable regardless of whether
* the entry was young or dirty. The generic routines only flush if the
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
index 6abead6..99348c1 100644
--- a/include/asm-powerpc/spu.h
+++ b/include/asm-powerpc/spu.h
@@ -131,7 +131,6 @@
u64 flags;
u64 class_0_pending;
u64 class_0_dar;
- u64 class_0_dsisr;
u64 class_1_dar;
u64 class_1_dsisr;
size_t ls_size;
diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h
index 129ec14..a40fd49 100644
--- a/include/asm-powerpc/spu_csa.h
+++ b/include/asm-powerpc/spu_csa.h
@@ -254,7 +254,7 @@
u64 spu_chnldata_RW[32];
u32 spu_mailbox_data[4];
u32 pu_mailbox_data[1];
- u64 class_0_dar, class_0_dsisr, class_0_pending;
+ u64 class_0_dar, class_0_pending;
u64 class_1_dar, class_1_dsisr;
unsigned long suspend_time;
spinlock_t register_lock;
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
index 2b6559a..5235f87 100644
--- a/include/asm-powerpc/system.h
+++ b/include/asm-powerpc/system.h
@@ -34,7 +34,7 @@
* SMP since it is only used to order updates to system memory.
*/
#define mb() __asm__ __volatile__ ("sync" : : : "memory")
-#define rmb() __asm__ __volatile__ (__stringify(LWSYNC) : : : "memory")
+#define rmb() __asm__ __volatile__ ("sync" : : : "memory")
#define wmb() __asm__ __volatile__ ("sync" : : : "memory")
#define read_barrier_depends() do { } while(0)
diff --git a/include/asm-s390/pgtable.h b/include/asm-s390/pgtable.h
index c7f4f8e..bd0ea19 100644
--- a/include/asm-s390/pgtable.h
+++ b/include/asm-s390/pgtable.h
@@ -223,6 +223,9 @@
#define _PAGE_SPECIAL 0x004 /* SW associated with special page */
#define __HAVE_ARCH_PTE_SPECIAL
+/* Set of bits not changed in pte_modify */
+#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_SPECIAL)
+
/* Six different types of pages. */
#define _PAGE_TYPE_EMPTY 0x400
#define _PAGE_TYPE_NONE 0x401
@@ -681,7 +684,7 @@
*/
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
- pte_val(pte) &= PAGE_MASK;
+ pte_val(pte) &= _PAGE_CHG_MASK;
pte_val(pte) |= pgprot_val(newprot);
return pte;
}
diff --git a/include/asm-s390/system.h b/include/asm-s390/system.h
index e0d4500..819e7d9 100644
--- a/include/asm-s390/system.h
+++ b/include/asm-s390/system.h
@@ -315,14 +315,14 @@
asm volatile( \
" lctlg %1,%2,0(%0)\n" \
: : "a" (&array), "i" (low), "i" (high), \
- "m" (*(addrtype *)(array))); \
+ "m" (*(addrtype *)(&array))); \
})
#define __ctl_store(array, low, high) ({ \
typedef struct { char _[sizeof(array)]; } addrtype; \
asm volatile( \
" stctg %2,%3,0(%1)\n" \
- : "=m" (*(addrtype *)(array)) \
+ : "=m" (*(addrtype *)(&array)) \
: "a" (&array), "i" (low), "i" (high)); \
})
@@ -333,14 +333,14 @@
asm volatile( \
" lctl %1,%2,0(%0)\n" \
: : "a" (&array), "i" (low), "i" (high), \
- "m" (*(addrtype *)(array))); \
+ "m" (*(addrtype *)(&array))); \
})
#define __ctl_store(array, low, high) ({ \
typedef struct { char _[sizeof(array)]; } addrtype; \
asm volatile( \
" stctl %2,%3,0(%1)\n" \
- : "=m" (*(addrtype *)(array)) \
+ : "=m" (*(addrtype *)(&array)) \
: "a" (&array), "i" (low), "i" (high)); \
})
diff --git a/include/asm-sh/checksum_32.h b/include/asm-sh/checksum_32.h
index 4bc8357..14b7ac2 100644
--- a/include/asm-sh/checksum_32.h
+++ b/include/asm-sh/checksum_32.h
@@ -109,7 +109,7 @@
will assume they contain their original values. */
: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1)
: "1" (iph), "2" (ihl)
- : "t");
+ : "t", "memory");
return csum_fold(sum);
}
diff --git a/include/asm-sparc64/io.h b/include/asm-sparc64/io.h
index c299b85..3158960 100644
--- a/include/asm-sparc64/io.h
+++ b/include/asm-sparc64/io.h
@@ -24,7 +24,8 @@
__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_inb */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
@@ -35,7 +36,8 @@
__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_inw */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
@@ -46,7 +48,8 @@
__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_inl */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
@@ -55,21 +58,24 @@
{
__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_outb */"
: /* no outputs */
- : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
static inline void _outw(u16 w, unsigned long addr)
{
__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_outw */"
: /* no outputs */
- : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
static inline void _outl(u32 l, unsigned long addr)
{
__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_outl */"
: /* no outputs */
- : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
#define inb(__addr) (_inb((unsigned long)(__addr)))
@@ -128,7 +134,8 @@
__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_readb */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
@@ -137,7 +144,8 @@
__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_readw */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
@@ -147,7 +155,8 @@
__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_readl */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
@@ -157,7 +166,8 @@
__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_readq */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
@@ -166,28 +176,32 @@
{
__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_writeb */"
: /* no outputs */
- : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
static inline void _writew(u16 w, volatile void __iomem *addr)
{
__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_writew */"
: /* no outputs */
- : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
static inline void _writel(u32 l, volatile void __iomem *addr)
{
__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_writel */"
: /* no outputs */
- : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
static inline void _writeq(u64 q, volatile void __iomem *addr)
{
__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_writeq */"
: /* no outputs */
- : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
#define readb(__addr) _readb(__addr)
@@ -299,7 +313,8 @@
__asm__ __volatile__("lduba\t[%1] %2, %0\t/* sbus_readb */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
return ret;
}
@@ -310,7 +325,8 @@
__asm__ __volatile__("lduha\t[%1] %2, %0\t/* sbus_readw */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
return ret;
}
@@ -321,7 +337,8 @@
__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* sbus_readl */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
return ret;
}
@@ -332,7 +349,8 @@
__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* sbus_readq */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
return ret;
}
@@ -341,28 +359,32 @@
{
__asm__ __volatile__("stba\t%r0, [%1] %2\t/* sbus_writeb */"
: /* no outputs */
- : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
}
static inline void _sbus_writew(u16 w, volatile void __iomem *addr)
{
__asm__ __volatile__("stha\t%r0, [%1] %2\t/* sbus_writew */"
: /* no outputs */
- : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
}
static inline void _sbus_writel(u32 l, volatile void __iomem *addr)
{
__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* sbus_writel */"
: /* no outputs */
- : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
}
static inline void _sbus_writeq(u64 l, volatile void __iomem *addr)
{
__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* sbus_writeq */"
: /* no outputs */
- : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
}
#define sbus_readb(__addr) _sbus_readb(__addr)
diff --git a/include/asm-um/mmu_context.h b/include/asm-um/mmu_context.h
index 6686fc5..54f42e8 100644
--- a/include/asm-um/mmu_context.h
+++ b/include/asm-um/mmu_context.h
@@ -22,16 +22,10 @@
static inline void activate_mm(struct mm_struct *old, struct mm_struct *new)
{
/*
- * This is called by fs/exec.c and fs/aio.c. In the first case, for an
- * exec, we don't need to do anything as we're called from userspace
- * and thus going to use a new host PID. In the second, we're called
- * from a kernel thread, and thus need to go doing the mmap's on the
- * host. Since they're very expensive, we want to avoid that as far as
- * possible.
+ * This is called by fs/exec.c and sys_unshare()
+ * when the new ->mm is used for the first time.
*/
- if (old != new && (current->flags & PF_BORROWED_MM))
- __switch_mm(&new->context.id);
-
+ __switch_mm(&new->context.id);
arch_dup_mmap(old, new);
}
diff --git a/include/asm-v850/clinkage.h b/include/asm-v850/clinkage.h
index 2b622ad..c389691 100644
--- a/include/asm-v850/clinkage.h
+++ b/include/asm-v850/clinkage.h
@@ -11,7 +11,7 @@
* Written by Miles Bader <miles@gnu.org>
*/
-#ifndef __CLINKAGE_H__
+#ifndef __V850_CLINKAGE_H__
#define __V850_CLINKAGE_H__
#include <asm/macrology.h>
diff --git a/include/asm-x86/desc.h b/include/asm-x86/desc.h
index 268a012..28bddbc 100644
--- a/include/asm-x86/desc.h
+++ b/include/asm-x86/desc.h
@@ -192,8 +192,8 @@
unsigned cpu = smp_processor_id();
ldt_desc ldt;
- set_tssldt_descriptor(&ldt, (unsigned long)addr,
- DESC_LDT, entries * sizeof(ldt) - 1);
+ set_tssldt_descriptor(&ldt, (unsigned long)addr, DESC_LDT,
+ entries * LDT_ENTRY_SIZE - 1);
write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT,
&ldt, DESC_LDT);
asm volatile("lldt %w0"::"q" (GDT_ENTRY_LDT*8));
diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h
index 6e64588..bb06027 100644
--- a/include/asm-x86/geode.h
+++ b/include/asm-x86/geode.h
@@ -112,8 +112,8 @@
#define VSA_VR_UNLOCK 0xFC53 /* unlock virtual register */
#define VSA_VR_SIGNATURE 0x0003
#define VSA_VR_MEM_SIZE 0x0200
-#define VSA_SIG 0x4132 /* signature is ascii 'VSA2' */
-
+#define AMD_VSA_SIG 0x4132 /* signature is ascii 'VSA2' */
+#define GSW_VSA_SIG 0x534d /* General Software signature */
/* GPIO */
#define GPIO_OUTPUT_VAL 0x00
diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h
index 6b722d3..37672f7 100644
--- a/include/asm-x86/i387.h
+++ b/include/asm-x86/i387.h
@@ -193,6 +193,8 @@
#else /* CONFIG_X86_32 */
+extern void finit(void);
+
static inline void tolerant_fwait(void)
{
asm volatile("fnclex ; fwait");
diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h
index 1d8cd01..844f2a8 100644
--- a/include/asm-x86/kvm_host.h
+++ b/include/asm-x86/kvm_host.h
@@ -18,6 +18,7 @@
#include <linux/kvm_para.h>
#include <linux/kvm_types.h>
+#include <asm/pvclock-abi.h>
#include <asm/desc.h>
#define KVM_MAX_VCPUS 16
@@ -282,7 +283,8 @@
struct x86_emulate_ctxt emulate_ctxt;
gpa_t time;
- struct kvm_vcpu_time_info hv_clock;
+ struct pvclock_vcpu_time_info hv_clock;
+ unsigned int hv_clock_tsc_khz;
unsigned int time_offset;
struct page *time_page;
};
diff --git a/include/asm-x86/kvm_para.h b/include/asm-x86/kvm_para.h
index 5098459..76f3921 100644
--- a/include/asm-x86/kvm_para.h
+++ b/include/asm-x86/kvm_para.h
@@ -48,24 +48,6 @@
#ifdef __KERNEL__
#include <asm/processor.h>
-/* xen binary-compatible interface. See xen headers for details */
-struct kvm_vcpu_time_info {
- uint32_t version;
- uint32_t pad0;
- uint64_t tsc_timestamp;
- uint64_t system_time;
- uint32_t tsc_to_system_mul;
- int8_t tsc_shift;
- int8_t pad[3];
-} __attribute__((__packed__)); /* 32 bytes */
-
-struct kvm_wall_clock {
- uint32_t wc_version;
- uint32_t wc_sec;
- uint32_t wc_nsec;
-} __attribute__((__packed__));
-
-
extern void kvmclock_init(void);
@@ -89,7 +71,8 @@
long ret;
asm volatile(KVM_HYPERCALL
: "=a"(ret)
- : "a"(nr));
+ : "a"(nr)
+ : "memory");
return ret;
}
@@ -98,7 +81,8 @@
long ret;
asm volatile(KVM_HYPERCALL
: "=a"(ret)
- : "a"(nr), "b"(p1));
+ : "a"(nr), "b"(p1)
+ : "memory");
return ret;
}
@@ -108,7 +92,8 @@
long ret;
asm volatile(KVM_HYPERCALL
: "=a"(ret)
- : "a"(nr), "b"(p1), "c"(p2));
+ : "a"(nr), "b"(p1), "c"(p2)
+ : "memory");
return ret;
}
@@ -118,7 +103,8 @@
long ret;
asm volatile(KVM_HYPERCALL
: "=a"(ret)
- : "a"(nr), "b"(p1), "c"(p2), "d"(p3));
+ : "a"(nr), "b"(p1), "c"(p2), "d"(p3)
+ : "memory");
return ret;
}
@@ -129,7 +115,8 @@
long ret;
asm volatile(KVM_HYPERCALL
: "=a"(ret)
- : "a"(nr), "b"(p1), "c"(p2), "d"(p3), "S"(p4));
+ : "a"(nr), "b"(p1), "c"(p2), "d"(p3), "S"(p4)
+ : "memory");
return ret;
}
diff --git a/include/asm-x86/msr.h b/include/asm-x86/msr.h
index 3707650..2b5f2c9 100644
--- a/include/asm-x86/msr.h
+++ b/include/asm-x86/msr.h
@@ -18,7 +18,7 @@
unsigned long low, high;
asm volatile(".byte 0x0f,0x01,0xf9"
: "=a" (low), "=d" (high), "=c" (*aux));
- return low | ((u64)high >> 32);
+ return low | ((u64)high << 32);
}
/*
diff --git a/include/asm-x86/page_32.h b/include/asm-x86/page_32.h
index 424e82f..ccf0ba3 100644
--- a/include/asm-x86/page_32.h
+++ b/include/asm-x86/page_32.h
@@ -14,7 +14,8 @@
#define __PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL)
#ifdef CONFIG_X86_PAE
-#define __PHYSICAL_MASK_SHIFT 36
+/* 44=32+12, the limit we can fit into an unsigned long pfn */
+#define __PHYSICAL_MASK_SHIFT 44
#define __VIRTUAL_MASK_SHIFT 32
#define PAGETABLE_LEVELS 3
diff --git a/include/asm-x86/pvclock-abi.h b/include/asm-x86/pvclock-abi.h
new file mode 100644
index 0000000..6857f84
--- /dev/null
+++ b/include/asm-x86/pvclock-abi.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_X86_PVCLOCK_ABI_H_
+#define _ASM_X86_PVCLOCK_ABI_H_
+#ifndef __ASSEMBLY__
+
+/*
+ * These structs MUST NOT be changed.
+ * They are the ABI between hypervisor and guest OS.
+ * Both Xen and KVM are using this.
+ *
+ * pvclock_vcpu_time_info holds the system time and the tsc timestamp
+ * of the last update. So the guest can use the tsc delta to get a
+ * more precise system time. There is one per virtual cpu.
+ *
+ * pvclock_wall_clock references the point in time when the system
+ * time was zero (usually boot time), thus the guest calculates the
+ * current wall clock by adding the system time.
+ *
+ * Protocol for the "version" fields is: hypervisor raises it (making
+ * it uneven) before it starts updating the fields and raises it again
+ * (making it even) when it is done. Thus the guest can make sure the
+ * time values it got are consistent by checking the version before
+ * and after reading them.
+ */
+
+struct pvclock_vcpu_time_info {
+ u32 version;
+ u32 pad0;
+ u64 tsc_timestamp;
+ u64 system_time;
+ u32 tsc_to_system_mul;
+ s8 tsc_shift;
+ u8 pad[3];
+} __attribute__((__packed__)); /* 32 bytes */
+
+struct pvclock_wall_clock {
+ u32 version;
+ u32 sec;
+ u32 nsec;
+} __attribute__((__packed__));
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_X86_PVCLOCK_ABI_H_ */
diff --git a/include/asm-x86/pvclock.h b/include/asm-x86/pvclock.h
new file mode 100644
index 0000000..85b1bba
--- /dev/null
+++ b/include/asm-x86/pvclock.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_X86_PVCLOCK_H_
+#define _ASM_X86_PVCLOCK_H_
+
+#include <linux/clocksource.h>
+#include <asm/pvclock-abi.h>
+
+/* some helper functions for xen and kvm pv clock sources */
+cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src);
+void pvclock_read_wallclock(struct pvclock_wall_clock *wall,
+ struct pvclock_vcpu_time_info *vcpu,
+ struct timespec *ts);
+
+#endif /* _ASM_X86_PVCLOCK_H_ */
diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h
index baf3a4d..e11f240 100644
--- a/include/asm-x86/xen/page.h
+++ b/include/asm-x86/xen/page.h
@@ -150,13 +150,9 @@
return (pte_t) { .pte = x };
}
-#ifdef CONFIG_X86_PAE
#define pmd_val_ma(v) ((v).pmd)
#define pud_val_ma(v) ((v).pgd.pgd)
#define __pmd_ma(x) ((pmd_t) { (x) } )
-#else /* !X86_PAE */
-#define pmd_val_ma(v) ((v).pud.pgd.pgd)
-#endif /* CONFIG_X86_PAE */
#define pgd_val_ma(x) ((x).pgd)
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 93b9885..71d70d1 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -166,6 +166,9 @@
unifdef-y += adb.h
unifdef-y += adfs_fs.h
unifdef-y += agpgart.h
+ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
+unifdef-y += a.out.h
+endif
unifdef-y += apm_bios.h
unifdef-y += atalk.h
unifdef-y += atmdev.h
diff --git a/include/linux/a.out.h b/include/linux/a.out.h
index 208f4e8..e86dfca 100644
--- a/include/linux/a.out.h
+++ b/include/linux/a.out.h
@@ -1,8 +1,6 @@
#ifndef __A_OUT_GNU_H__
#define __A_OUT_GNU_H__
-#ifdef CONFIG_ARCH_SUPPORTS_AOUT
-
#define __GNU_EXEC_MACROS__
#ifndef __STRUCT_EXEC_OVERRIDE__
@@ -277,10 +275,4 @@
#endif /* no N_RELOCATION_INFO_DECLARED. */
#endif /*__ASSEMBLY__ */
-#else /* CONFIG_ARCH_SUPPORTS_AOUT */
-#ifndef __ASSEMBLY__
-struct exec {
-};
-#endif
-#endif /* CONFIG_ARCH_SUPPORTS_AOUT */
#endif /* __A_OUT_GNU_H__ */
diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h
index 661d90d..972b12b 100644
--- a/include/linux/agp_backend.h
+++ b/include/linux/agp_backend.h
@@ -30,14 +30,6 @@
#ifndef _AGP_BACKEND_H
#define _AGP_BACKEND_H 1
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
enum chipset_type {
NOT_SUPPORTED,
SUPPORTED,
@@ -57,7 +49,7 @@
size_t aper_size;
int max_memory; /* In pages */
int current_memory;
- int cant_use_aperture;
+ bool cant_use_aperture;
unsigned long page_mask;
struct vm_operations_struct *vm_ops;
};
@@ -83,9 +75,9 @@
off_t pg_start;
u32 type;
u32 physical;
- u8 is_bound;
- u8 is_flushed;
- u8 vmalloc_flag;
+ bool is_bound;
+ bool is_flushed;
+ bool vmalloc_flag;
};
#define AGP_NORMAL_MEMORY 0
diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h
index 62aef58..c8fdb6e 100644
--- a/include/linux/agpgart.h
+++ b/include/linux/agpgart.h
@@ -206,8 +206,8 @@
struct agp_controller *current_controller;
struct agp_controller *controllers;
struct agp_file_private *file_priv_list;
- u8 used_by_controller;
- u8 backend_acquired;
+ bool used_by_controller;
+ bool backend_acquired;
};
#endif /* __KERNEL__ */
diff --git a/include/linux/audit.h b/include/linux/audit.h
index 63c3bb9..8b82974 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -571,7 +571,7 @@
extern int audit_update_lsm_rules(void);
/* Private API (for audit.c only) */
-extern int audit_filter_user(struct netlink_skb_parms *cb, int type);
+extern int audit_filter_user(struct netlink_skb_parms *cb);
extern int audit_filter_type(int type);
extern int audit_receive_filter(int type, int pid, int uid, int seq,
void *data, size_t datasz, uid_t loginuid,
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 61c15ea..0933a14 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -64,6 +64,7 @@
struct bio_set;
struct bio;
+struct bio_integrity_payload;
typedef void (bio_end_io_t) (struct bio *, int);
typedef void (bio_destructor_t) (struct bio *);
@@ -112,6 +113,9 @@
atomic_t bi_cnt; /* pin count */
void *bi_private;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+ struct bio_integrity_payload *bi_integrity; /* data integrity */
+#endif
bio_destructor_t *bi_destructor; /* destructor */
};
@@ -271,6 +275,29 @@
*/
#define bio_get(bio) atomic_inc(&(bio)->bi_cnt)
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+/*
+ * bio integrity payload
+ */
+struct bio_integrity_payload {
+ struct bio *bip_bio; /* parent bio */
+ struct bio_vec *bip_vec; /* integrity data vector */
+
+ sector_t bip_sector; /* virtual start sector */
+
+ void *bip_buf; /* generated integrity data */
+ bio_end_io_t *bip_end_io; /* saved I/O completion fn */
+
+ int bip_error; /* saved I/O error */
+ unsigned int bip_size;
+
+ unsigned short bip_pool; /* pool the ivec came from */
+ unsigned short bip_vcnt; /* # of integrity bio_vecs */
+ unsigned short bip_idx; /* current bip_vec index */
+
+ struct work_struct bip_work; /* I/O completion */
+};
+#endif /* CONFIG_BLK_DEV_INTEGRITY */
/*
* A bio_pair is used when we need to split a bio.
@@ -283,10 +310,14 @@
* in bio2.bi_private
*/
struct bio_pair {
- struct bio bio1, bio2;
- struct bio_vec bv1, bv2;
- atomic_t cnt;
- int error;
+ struct bio bio1, bio2;
+ struct bio_vec bv1, bv2;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+ struct bio_integrity_payload bip1, bip2;
+ struct bio_vec iv1, iv2;
+#endif
+ atomic_t cnt;
+ int error;
};
extern struct bio_pair *bio_split(struct bio *bi, mempool_t *pool,
int first_sectors);
@@ -333,6 +364,39 @@
int, int);
extern int bio_uncopy_user(struct bio *);
void zero_fill_bio(struct bio *bio);
+extern struct bio_vec *bvec_alloc_bs(gfp_t, int, unsigned long *, struct bio_set *);
+extern unsigned int bvec_nr_vecs(unsigned short idx);
+
+/*
+ * bio_set is used to allow other portions of the IO system to
+ * allocate their own private memory pools for bio and iovec structures.
+ * These memory pools in turn all allocate from the bio_slab
+ * and the bvec_slabs[].
+ */
+#define BIO_POOL_SIZE 2
+#define BIOVEC_NR_POOLS 6
+
+struct bio_set {
+ mempool_t *bio_pool;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+ mempool_t *bio_integrity_pool;
+#endif
+ mempool_t *bvec_pools[BIOVEC_NR_POOLS];
+};
+
+struct biovec_slab {
+ int nr_vecs;
+ char *name;
+ struct kmem_cache *slab;
+};
+
+extern struct bio_set *fs_bio_set;
+
+/*
+ * a small number of entries is fine, not going to be performance critical.
+ * basically we just need to survive
+ */
+#define BIO_SPLIT_ENTRIES 2
#ifdef CONFIG_HIGHMEM
/*
@@ -381,5 +445,63 @@
__bio_kmap_irq((bio), (bio)->bi_idx, (flags))
#define bio_kunmap_irq(buf,flags) __bio_kunmap_irq(buf, flags)
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+
+#define bip_vec_idx(bip, idx) (&(bip->bip_vec[(idx)]))
+#define bip_vec(bip) bip_vec_idx(bip, 0)
+
+#define __bip_for_each_vec(bvl, bip, i, start_idx) \
+ for (bvl = bip_vec_idx((bip), (start_idx)), i = (start_idx); \
+ i < (bip)->bip_vcnt; \
+ bvl++, i++)
+
+#define bip_for_each_vec(bvl, bip, i) \
+ __bip_for_each_vec(bvl, bip, i, (bip)->bip_idx)
+
+static inline int bio_integrity(struct bio *bio)
+{
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+ return bio->bi_integrity != NULL;
+#else
+ return 0;
+#endif
+}
+
+extern struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *, gfp_t, unsigned int, struct bio_set *);
+extern struct bio_integrity_payload *bio_integrity_alloc(struct bio *, gfp_t, unsigned int);
+extern void bio_integrity_free(struct bio *, struct bio_set *);
+extern int bio_integrity_add_page(struct bio *, struct page *, unsigned int, unsigned int);
+extern int bio_integrity_enabled(struct bio *bio);
+extern int bio_integrity_set_tag(struct bio *, void *, unsigned int);
+extern int bio_integrity_get_tag(struct bio *, void *, unsigned int);
+extern int bio_integrity_prep(struct bio *);
+extern void bio_integrity_endio(struct bio *, int);
+extern void bio_integrity_advance(struct bio *, unsigned int);
+extern void bio_integrity_trim(struct bio *, unsigned int, unsigned int);
+extern void bio_integrity_split(struct bio *, struct bio_pair *, int);
+extern int bio_integrity_clone(struct bio *, struct bio *, struct bio_set *);
+extern int bioset_integrity_create(struct bio_set *, int);
+extern void bioset_integrity_free(struct bio_set *);
+extern void bio_integrity_init_slab(void);
+
+#else /* CONFIG_BLK_DEV_INTEGRITY */
+
+#define bio_integrity(a) (0)
+#define bioset_integrity_create(a, b) (0)
+#define bio_integrity_prep(a) (0)
+#define bio_integrity_enabled(a) (0)
+#define bio_integrity_clone(a, b, c) (0)
+#define bioset_integrity_free(a) do { } while (0)
+#define bio_integrity_free(a, b) do { } while (0)
+#define bio_integrity_endio(a, b) do { } while (0)
+#define bio_integrity_advance(a, b) do { } while (0)
+#define bio_integrity_trim(a, b, c) do { } while (0)
+#define bio_integrity_split(a, b, c) do { } while (0)
+#define bio_integrity_set_tag(a, b, c) do { } while (0)
+#define bio_integrity_get_tag(a, b, c) do { } while (0)
+#define bio_integrity_init_slab(a) do { } while (0)
+
+#endif /* CONFIG_BLK_DEV_INTEGRITY */
+
#endif /* CONFIG_BLOCK */
#endif /* __LINUX_BIO_H */
diff --git a/include/linux/bitrev.h b/include/linux/bitrev.h
index 05e540d..7ffe03f 100644
--- a/include/linux/bitrev.h
+++ b/include/linux/bitrev.h
@@ -10,6 +10,7 @@
return byte_rev_table[byte];
}
+extern u16 bitrev16(u16 in);
extern u32 bitrev32(u32 in);
#endif /* _LINUX_BITREV_H */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index d2a1b71..1ffd8bf 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -23,7 +23,6 @@
struct scsi_ioctl_command;
struct request_queue;
-typedef struct request_queue request_queue_t __deprecated;
struct elevator_queue;
typedef struct elevator_queue elevator_t;
struct request_pm_state;
@@ -34,12 +33,6 @@
#define BLKDEV_MIN_RQ 4
#define BLKDEV_MAX_RQ 128 /* Default maximum */
-int put_io_context(struct io_context *ioc);
-void exit_io_context(void);
-struct io_context *get_io_context(gfp_t gfp_flags, int node);
-struct io_context *alloc_io_context(gfp_t gfp_flags, int node);
-void copy_io_context(struct io_context **pdst, struct io_context **psrc);
-
struct request;
typedef void (rq_end_io_fn)(struct request *, int);
@@ -113,6 +106,7 @@
__REQ_ALLOCED, /* request came from our alloc pool */
__REQ_RW_META, /* metadata io request */
__REQ_COPY_USER, /* contains copies of user pages */
+ __REQ_INTEGRITY, /* integrity metadata has been remapped */
__REQ_NR_BITS, /* stops here */
};
@@ -135,6 +129,7 @@
#define REQ_ALLOCED (1 << __REQ_ALLOCED)
#define REQ_RW_META (1 << __REQ_RW_META)
#define REQ_COPY_USER (1 << __REQ_COPY_USER)
+#define REQ_INTEGRITY (1 << __REQ_INTEGRITY)
#define BLK_MAX_CDB 16
@@ -259,7 +254,14 @@
typedef void (unplug_fn) (struct request_queue *);
struct bio_vec;
-typedef int (merge_bvec_fn) (struct request_queue *, struct bio *, struct bio_vec *);
+struct bvec_merge_data {
+ struct block_device *bi_bdev;
+ sector_t bi_sector;
+ unsigned bi_size;
+ unsigned long bi_rw;
+};
+typedef int (merge_bvec_fn) (struct request_queue *, struct bvec_merge_data *,
+ struct bio_vec *);
typedef void (prepare_flush_fn) (struct request_queue *, struct request *);
typedef void (softirq_done_fn)(struct request *);
typedef int (dma_drain_needed_fn)(struct request *);
@@ -426,6 +428,32 @@
__set_bit(flag, &q->queue_flags);
}
+static inline int queue_flag_test_and_clear(unsigned int flag,
+ struct request_queue *q)
+{
+ WARN_ON_ONCE(!queue_is_locked(q));
+
+ if (test_bit(flag, &q->queue_flags)) {
+ __clear_bit(flag, &q->queue_flags);
+ return 1;
+ }
+
+ return 0;
+}
+
+static inline int queue_flag_test_and_set(unsigned int flag,
+ struct request_queue *q)
+{
+ WARN_ON_ONCE(!queue_is_locked(q));
+
+ if (!test_bit(flag, &q->queue_flags)) {
+ __set_bit(flag, &q->queue_flags);
+ return 0;
+ }
+
+ return 1;
+}
+
static inline void queue_flag_set(unsigned int flag, struct request_queue *q)
{
WARN_ON_ONCE(!queue_is_locked(q));
@@ -676,7 +704,6 @@
struct request *, int);
extern void blk_execute_rq_nowait(struct request_queue *, struct gendisk *,
struct request *, int, rq_end_io_fn *);
-extern int blk_verify_command(unsigned char *, int);
extern void blk_unplug(struct request_queue *q);
static inline struct request_queue *bdev_get_queue(struct block_device *bdev)
@@ -749,6 +776,7 @@
extern void blk_queue_hardsect_size(struct request_queue *, unsigned short);
extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b);
extern void blk_queue_dma_pad(struct request_queue *, unsigned int);
+extern void blk_queue_update_dma_pad(struct request_queue *, unsigned int);
extern int blk_queue_dma_drain(struct request_queue *q,
dma_drain_needed_fn *dma_drain_needed,
void *buf, unsigned int size);
@@ -802,6 +830,15 @@
extern int blkdev_issue_flush(struct block_device *, sector_t *);
+/*
+* command filter functions
+*/
+extern int blk_verify_command(struct file *file, unsigned char *cmd);
+extern int blk_cmd_filter_verify_command(struct blk_scsi_cmd_filter *filter,
+ unsigned char *cmd, mode_t *f_mode);
+extern int blk_register_filter(struct gendisk *disk);
+extern void blk_unregister_filter(struct gendisk *disk);
+
#define MAX_PHYS_SEGMENTS 128
#define MAX_HW_SEGMENTS 128
#define SAFE_MAX_SECTORS 255
@@ -865,6 +902,105 @@
#define MODULE_ALIAS_BLOCKDEV_MAJOR(major) \
MODULE_ALIAS("block-major-" __stringify(major) "-*")
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+
+#define INTEGRITY_FLAG_READ 2 /* verify data integrity on read */
+#define INTEGRITY_FLAG_WRITE 4 /* generate data integrity on write */
+
+struct blk_integrity_exchg {
+ void *prot_buf;
+ void *data_buf;
+ sector_t sector;
+ unsigned int data_size;
+ unsigned short sector_size;
+ const char *disk_name;
+};
+
+typedef void (integrity_gen_fn) (struct blk_integrity_exchg *);
+typedef int (integrity_vrfy_fn) (struct blk_integrity_exchg *);
+typedef void (integrity_set_tag_fn) (void *, void *, unsigned int);
+typedef void (integrity_get_tag_fn) (void *, void *, unsigned int);
+
+struct blk_integrity {
+ integrity_gen_fn *generate_fn;
+ integrity_vrfy_fn *verify_fn;
+ integrity_set_tag_fn *set_tag_fn;
+ integrity_get_tag_fn *get_tag_fn;
+
+ unsigned short flags;
+ unsigned short tuple_size;
+ unsigned short sector_size;
+ unsigned short tag_size;
+
+ const char *name;
+
+ struct kobject kobj;
+};
+
+extern int blk_integrity_register(struct gendisk *, struct blk_integrity *);
+extern void blk_integrity_unregister(struct gendisk *);
+extern int blk_integrity_compare(struct block_device *, struct block_device *);
+extern int blk_rq_map_integrity_sg(struct request *, struct scatterlist *);
+extern int blk_rq_count_integrity_sg(struct request *);
+
+static inline unsigned short blk_integrity_tuple_size(struct blk_integrity *bi)
+{
+ if (bi)
+ return bi->tuple_size;
+
+ return 0;
+}
+
+static inline struct blk_integrity *bdev_get_integrity(struct block_device *bdev)
+{
+ return bdev->bd_disk->integrity;
+}
+
+static inline unsigned int bdev_get_tag_size(struct block_device *bdev)
+{
+ struct blk_integrity *bi = bdev_get_integrity(bdev);
+
+ if (bi)
+ return bi->tag_size;
+
+ return 0;
+}
+
+static inline int bdev_integrity_enabled(struct block_device *bdev, int rw)
+{
+ struct blk_integrity *bi = bdev_get_integrity(bdev);
+
+ if (bi == NULL)
+ return 0;
+
+ if (rw == READ && bi->verify_fn != NULL &&
+ (bi->flags & INTEGRITY_FLAG_READ))
+ return 1;
+
+ if (rw == WRITE && bi->generate_fn != NULL &&
+ (bi->flags & INTEGRITY_FLAG_WRITE))
+ return 1;
+
+ return 0;
+}
+
+static inline int blk_integrity_rq(struct request *rq)
+{
+ return bio_integrity(rq->bio);
+}
+
+#else /* CONFIG_BLK_DEV_INTEGRITY */
+
+#define blk_integrity_rq(rq) (0)
+#define blk_rq_count_integrity_sg(a) (0)
+#define blk_rq_map_integrity_sg(a, b) (0)
+#define bdev_get_integrity(a) (0)
+#define bdev_get_tag_size(a) (0)
+#define blk_integrity_compare(a, b) (0)
+#define blk_integrity_register(a, b) (0)
+#define blk_integrity_unregister(a) do { } while (0);
+
+#endif /* CONFIG_BLK_DEV_INTEGRITY */
#else /* CONFIG_BLOCK */
/*
@@ -877,17 +1013,6 @@
return 0;
}
-static inline void exit_io_context(void)
-{
-}
-
-struct io_context;
-static inline int put_io_context(struct io_context *ioc)
-{
- return 1;
-}
-
-
#endif /* CONFIG_BLOCK */
#endif
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index e3ef903..d084b8d 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -129,6 +129,7 @@
u32 dev;
struct dentry *dir;
struct dentry *dropped_file;
+ struct dentry *msg_file;
atomic_t dropped;
};
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index 6a5dbdc..686895b 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -94,7 +94,7 @@
unsigned long freepfn,
unsigned long startpfn,
unsigned long endpfn);
-extern void reserve_bootmem_node(pg_data_t *pgdat,
+extern int reserve_bootmem_node(pg_data_t *pgdat,
unsigned long physaddr,
unsigned long size,
int flags);
diff --git a/include/linux/capability.h b/include/linux/capability.h
index f4ea0dd9a..0267384 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -31,11 +31,11 @@
#define _LINUX_CAPABILITY_VERSION_1 0x19980330
#define _LINUX_CAPABILITY_U32S_1 1
-#define _LINUX_CAPABILITY_VERSION_2 0x20071026
+#define _LINUX_CAPABILITY_VERSION_2 0x20071026 /* deprecated - use v3 */
#define _LINUX_CAPABILITY_U32S_2 2
-#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_2
-#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_2
+#define _LINUX_CAPABILITY_VERSION_3 0x20080522
+#define _LINUX_CAPABILITY_U32S_3 2
typedef struct __user_cap_header_struct {
__u32 version;
@@ -77,10 +77,23 @@
} data[VFS_CAP_U32];
};
-#ifdef __KERNEL__
+#ifndef __KERNEL__
+
+/*
+ * Backwardly compatible definition for source code - trapped in a
+ * 32-bit world. If you find you need this, please consider using
+ * libcap to untrap yourself...
+ */
+#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_1
+#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_1
+
+#else
+
+#define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3
+#define _KERNEL_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_3
typedef struct kernel_cap_struct {
- __u32 cap[_LINUX_CAPABILITY_U32S];
+ __u32 cap[_KERNEL_CAPABILITY_U32S];
} kernel_cap_t;
#define _USER_CAP_HEADER_SIZE (sizeof(struct __user_cap_header_struct))
@@ -351,7 +364,7 @@
*/
#define CAP_FOR_EACH_U32(__capi) \
- for (__capi = 0; __capi < _LINUX_CAPABILITY_U32S; ++__capi)
+ for (__capi = 0; __capi < _KERNEL_CAPABILITY_U32S; ++__capi)
# define CAP_FS_MASK_B0 (CAP_TO_MASK(CAP_CHOWN) \
| CAP_TO_MASK(CAP_DAC_OVERRIDE) \
@@ -361,7 +374,7 @@
# define CAP_FS_MASK_B1 (CAP_TO_MASK(CAP_MAC_OVERRIDE))
-#if _LINUX_CAPABILITY_U32S != 2
+#if _KERNEL_CAPABILITY_U32S != 2
# error Fix up hand-coded capability macro initializers
#else /* HAND-CODED capability initializers */
@@ -372,7 +385,7 @@
# define CAP_NFSD_SET ((kernel_cap_t){{ CAP_FS_MASK_B0|CAP_TO_MASK(CAP_SYS_RESOURCE), \
CAP_FS_MASK_B1 } })
-#endif /* _LINUX_CAPABILITY_U32S != 2 */
+#endif /* _KERNEL_CAPABILITY_U32S != 2 */
#define CAP_INIT_INH_SET CAP_EMPTY_SET
@@ -488,6 +501,8 @@
extern const kernel_cap_t __cap_full_set;
extern const kernel_cap_t __cap_init_eff_set;
+kernel_cap_t cap_set_effective(const kernel_cap_t pE_new);
+
int capable(int cap);
int __capable(struct task_struct *t, int cap);
diff --git a/include/linux/cfag12864b.h b/include/linux/cfag12864b.h
index 1605dd8..6f9f19d 100644
--- a/include/linux/cfag12864b.h
+++ b/include/linux/cfag12864b.h
@@ -4,7 +4,7 @@
* Description: cfag12864b LCD driver header
* License: GPLv2
*
- * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ * Author: Copyright (C) Miguel Ojeda Sandonis
* Date: 2006-10-12
*
* This program is free software; you can redistribute it and/or modify
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 51e6b1e..dcf77fa 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -82,6 +82,7 @@
};
struct cpuidle_device {
+ unsigned int registered:1;
unsigned int enabled:1;
unsigned int cpu;
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 5df3db5..c24875b 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -353,6 +353,10 @@
for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
#endif /* NR_CPUS */
+#define next_cpu_nr(n, src) next_cpu(n, src)
+#define cpus_weight_nr(cpumask) cpus_weight(cpumask)
+#define for_each_cpu_mask_nr(cpu, mask) for_each_cpu_mask(cpu, mask)
+
/*
* The following particular system cpumasks and operations manage
* possible, present and online cpus. Each of them is a fixed size
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 2a66394..d982eb8 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -300,7 +300,7 @@
extern char *dynamic_dname(struct dentry *, char *, int, const char *, ...);
extern char *__d_path(const struct path *path, struct path *root, char *, int);
-extern char *d_path(struct path *, char *, int);
+extern char *d_path(const struct path *, char *, int);
extern char *dentry_path(struct dentry *, char *, int);
/* Allocation counts.. */
diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h
index f4a5871..4aaa4af 100644
--- a/include/linux/debug_locks.h
+++ b/include/linux/debug_locks.h
@@ -1,6 +1,8 @@
#ifndef __LINUX_DEBUG_LOCKING_H
#define __LINUX_DEBUG_LOCKING_H
+#include <linux/kernel.h>
+
struct task_struct;
extern int debug_locks;
@@ -11,14 +13,6 @@
*/
extern int debug_locks_off(void);
-/*
- * In the debug case we carry the caller's instruction pointer into
- * other functions, but we dont want the function argument overhead
- * in the nondebug case - hence these macros:
- */
-#define _RET_IP_ (unsigned long)__builtin_return_address(0)
-#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; })
-
#define DEBUG_LOCKS_WARN_ON(c) \
({ \
int __ret = 0; \
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index 4d10c73..6c7eff2 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -13,7 +13,7 @@
struct device;
-#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
+#if defined(CONFIG_FW_LOADER) || (defined(CONFIG_FW_LOADER_MODULE) && defined(MODULE))
int request_firmware(const struct firmware **fw, const char *name,
struct device *device);
int request_firmware_nowait(
diff --git a/include/linux/fs.h b/include/linux/fs.h
index f413085..d8e2762 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -83,6 +83,7 @@
#define READ_SYNC (READ | (1 << BIO_RW_SYNC))
#define READ_META (READ | (1 << BIO_RW_META))
#define WRITE_SYNC (WRITE | (1 << BIO_RW_SYNC))
+#define SWRITE_SYNC (SWRITE | (1 << BIO_RW_SYNC))
#define WRITE_BARRIER ((1 << BIO_RW) | (1 << BIO_RW_BARRIER))
#define SEL_IN 1
@@ -894,8 +895,6 @@
typedef struct files_struct *fl_owner_t;
struct file_lock_operations {
- void (*fl_insert)(struct file_lock *); /* lock insertion callback */
- void (*fl_remove)(struct file_lock *); /* lock removal callback */
void (*fl_copy_lock)(struct file_lock *, struct file_lock *);
void (*fl_release_private)(struct file_lock *);
};
@@ -2000,7 +1999,10 @@
extern int simple_pin_fs(struct file_system_type *, struct vfsmount **mount, int *count);
extern void simple_release_fs(struct vfsmount **mount, int *count);
-extern ssize_t simple_read_from_buffer(void __user *, size_t, loff_t *, const void *, size_t);
+extern ssize_t simple_read_from_buffer(void __user *to, size_t count,
+ loff_t *ppos, const void *from, size_t available);
+extern ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos,
+ const void *from, size_t available);
#ifdef CONFIG_MIGRATION
extern int buffer_migrate_page(struct address_space *,
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index ae7aec3..e878741 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -110,6 +110,14 @@
#define GENHD_FL_SUPPRESS_PARTITION_INFO 32
#define GENHD_FL_FAIL 64
+#define BLK_SCSI_MAX_CMDS (256)
+#define BLK_SCSI_CMD_PER_LONG (BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
+
+struct blk_scsi_cmd_filter {
+ unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
+ unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
+ struct kobject kobj;
+};
struct gendisk {
int major; /* major number of driver */
@@ -120,6 +128,7 @@
struct hd_struct **part; /* [indexed by minor] */
struct block_device_operations *fops;
struct request_queue *queue;
+ struct blk_scsi_cmd_filter cmd_filter;
void *private_data;
sector_t capacity;
@@ -141,6 +150,9 @@
struct disk_stats dkstats;
#endif
struct work_struct async_notify;
+#ifdef CONFIG_BLK_DEV_INTEGRITY
+ struct blk_integrity *integrity;
+#endif
};
/*
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index fb9af6a..8dc7301 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -171,7 +171,7 @@
struct i2c_adapter *adapter; /* the adapter we sit on */
struct i2c_driver *driver; /* and our access routines */
struct device dev; /* the device structure */
- int irq; /* irq issued by device (or -1) */
+ int irq; /* irq issued by device */
struct list_head list; /* DEPRECATED */
struct completion released;
};
diff --git a/include/linux/ide.h b/include/linux/ide.h
index f8f195c..eddb6da 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -153,7 +153,7 @@
ide_qd65xx, ide_umc8672, ide_ht6560b,
ide_rz1000, ide_trm290,
ide_cmd646, ide_cy82c693, ide_4drives,
- ide_pmac, ide_etrax100, ide_acorn,
+ ide_pmac, ide_acorn,
ide_au1xxx, ide_palm3710
};
@@ -189,6 +189,21 @@
hw->io_ports.ctl_addr = ctl_addr;
}
+/* for IDE PCI controllers in legacy mode, temporary */
+static inline int __ide_default_irq(unsigned long base)
+{
+ switch (base) {
+#ifdef CONFIG_IA64
+ case 0x1f0: return isa_irq_to_vector(14);
+ case 0x170: return isa_irq_to_vector(15);
+#else
+ case 0x1f0: return 14;
+ case 0x170: return 15;
+#endif
+ }
+ return 0;
+}
+
#include <asm/ide.h>
#if !defined(MAX_HWIFS) || defined(CONFIG_EMBEDDED)
diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h
index f1fbe9c..d4efe40 100644
--- a/include/linux/if_tunnel.h
+++ b/include/linux/if_tunnel.h
@@ -41,7 +41,7 @@
__u16 __reserved;
__u32 datalen;
__u32 __reserved2;
- void __user *data;
+ /* data follows */
};
/* PRL flags */
diff --git a/include/linux/in_route.h b/include/linux/in_route.h
index 61f25c3..b261b8c 100644
--- a/include/linux/in_route.h
+++ b/include/linux/in_route.h
@@ -10,19 +10,19 @@
#define RTCF_NOPMTUDISC RTM_F_NOPMTUDISC
#define RTCF_NOTIFY 0x00010000
-#define RTCF_DIRECTDST 0x00020000
+#define RTCF_DIRECTDST 0x00020000 /* unused */
#define RTCF_REDIRECTED 0x00040000
-#define RTCF_TPROXY 0x00080000
+#define RTCF_TPROXY 0x00080000 /* unused */
-#define RTCF_FAST 0x00200000
-#define RTCF_MASQ 0x00400000
-#define RTCF_SNAT 0x00800000
+#define RTCF_FAST 0x00200000 /* unused */
+#define RTCF_MASQ 0x00400000 /* unused */
+#define RTCF_SNAT 0x00800000 /* unused */
#define RTCF_DOREDIRECT 0x01000000
#define RTCF_DIRECTSRC 0x04000000
#define RTCF_DNAT 0x08000000
#define RTCF_BROADCAST 0x10000000
#define RTCF_MULTICAST 0x20000000
-#define RTCF_REJECT 0x40000000
+#define RTCF_REJECT 0x40000000 /* unused */
#define RTCF_LOCAL 0x80000000
#define RTCF_NAT (RTCF_DNAT|RTCF_SNAT)
diff --git a/include/linux/inet_lro.h b/include/linux/inet_lro.h
index 80335b7..c4335fa 100644
--- a/include/linux/inet_lro.h
+++ b/include/linux/inet_lro.h
@@ -84,7 +84,11 @@
from received packets and eth protocol
is still ETH_P_8021Q */
- u32 ip_summed; /* Set in non generated SKBs in page mode */
+ /*
+ * Set for generated SKBs that are not added to
+ * the frag list in fragmented mode
+ */
+ u32 ip_summed;
u32 ip_summed_aggr; /* Set in aggregated SKBs: CHECKSUM_UNNECESSARY
* or CHECKSUM_NONE */
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index 7009b0c..c6f51ad 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -117,7 +117,6 @@
__be32 ifa_address;
__be32 ifa_mask;
__be32 ifa_broadcast;
- __be32 ifa_anycast;
unsigned char ifa_scope;
unsigned char ifa_flags;
unsigned char ifa_prefixlen;
diff --git a/include/linux/input.h b/include/linux/input.h
index 28a094f..d150c57 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -534,8 +534,8 @@
#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
#define KEY_FRAMEFORWARD 0x1b5
-
#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
+#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
#define KEY_DEL_EOL 0x1c0
#define KEY_DEL_EOS 0x1c1
@@ -637,7 +637,9 @@
#define SW_LID 0x00 /* set = lid shut */
#define SW_TABLET_MODE 0x01 /* set = tablet mode */
#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
-#define SW_RADIO 0x03 /* set = radio enabled */
+#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
+ set = radio enabled */
+#define SW_RADIO SW_RFKILL_ALL /* deprecated */
#define SW_MAX 0x0f
#define SW_CNT (SW_MAX+1)
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index 2b7a118..08b987b 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -99,4 +99,22 @@
return NULL;
}
+#ifdef CONFIG_BLOCK
+int put_io_context(struct io_context *ioc);
+void exit_io_context(void);
+struct io_context *get_io_context(gfp_t gfp_flags, int node);
+struct io_context *alloc_io_context(gfp_t gfp_flags, int node);
+void copy_io_context(struct io_context **pdst, struct io_context **psrc);
+#else
+static inline void exit_io_context(void)
+{
+}
+
+struct io_context;
+static inline int put_io_context(struct io_context *ioc)
+{
+ return 1;
+}
+#endif
+
#endif
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index d5d40a9..c6801bf 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -53,14 +53,14 @@
#define IORESOURCE_AUTO 0x40000000
#define IORESOURCE_BUSY 0x80000000 /* Driver has marked this resource busy */
-/* ISA PnP IRQ specific bits (IORESOURCE_BITS) */
+/* PnP IRQ specific bits (IORESOURCE_BITS) */
#define IORESOURCE_IRQ_HIGHEDGE (1<<0)
#define IORESOURCE_IRQ_LOWEDGE (1<<1)
#define IORESOURCE_IRQ_HIGHLEVEL (1<<2)
#define IORESOURCE_IRQ_LOWLEVEL (1<<3)
#define IORESOURCE_IRQ_SHAREABLE (1<<4)
-/* ISA PnP DMA specific bits (IORESOURCE_BITS) */
+/* PnP DMA specific bits (IORESOURCE_BITS) */
#define IORESOURCE_DMA_TYPE_MASK (3<<0)
#define IORESOURCE_DMA_8BIT (0<<0)
#define IORESOURCE_DMA_8AND16BIT (1<<0)
@@ -76,7 +76,7 @@
#define IORESOURCE_DMA_TYPEB (2<<6)
#define IORESOURCE_DMA_TYPEF (3<<6)
-/* ISA PnP memory I/O specific bits (IORESOURCE_BITS) */
+/* PnP memory I/O specific bits (IORESOURCE_BITS) */
#define IORESOURCE_MEM_WRITEABLE (1<<0) /* dup: IORESOURCE_READONLY */
#define IORESOURCE_MEM_CACHEABLE (1<<1) /* dup: IORESOURCE_CACHEABLE */
#define IORESOURCE_MEM_RANGELENGTH (1<<2) /* dup: IORESOURCE_RANGELENGTH */
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 10b666b..cde056e 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -396,8 +396,10 @@
{
struct request_sock *req = reqsk_alloc(ops);
- if (req != NULL)
+ if (req != NULL) {
inet_rsk(req)->inet6_rsk_offset = inet6_rsk_offset(req);
+ inet6_rsk(req)->pktopts = NULL;
+ }
return req;
}
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 05e2b30..d147f0f 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -919,6 +919,9 @@
struct proc_dir_entry *j_proc_entry;
struct transaction_stats_s j_stats;
+ /* Failed journal commit ID */
+ unsigned int j_failed_commit;
+
/*
* An opaque pointer to fs-private information. ext3 puts its
* superblock pointer here
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 792bf0a..2e70006 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -46,6 +46,9 @@
#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
+#define _RET_IP_ (unsigned long)__builtin_return_address(0)
+#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; })
+
#ifdef CONFIG_LBD
# include <asm/div64.h>
# define sector_div(a, b) do_div(a, b)
diff --git a/include/linux/ks0108.h b/include/linux/ks0108.h
index a2c54ac..cb31179 100644
--- a/include/linux/ks0108.h
+++ b/include/linux/ks0108.h
@@ -4,7 +4,7 @@
* Description: ks0108 LCD Controller driver header
* License: GPLv2
*
- * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ * Author: Copyright (C) Miguel Ojeda Sandonis
* Date: 2006-10-31
*
* This program is free software; you can redistribute it and/or modify
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 3989789..de9d1df 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -33,6 +33,7 @@
#define KVM_REQ_REPORT_TPR_ACCESS 2
#define KVM_REQ_MMU_RELOAD 3
#define KVM_REQ_TRIPLE_FAULT 4
+#define KVM_REQ_PENDING_TIMER 5
struct kvm_vcpu;
extern struct kmem_cache *kvm_vcpu_cache;
@@ -297,7 +298,7 @@
return (gpa_t)gfn << PAGE_SHIFT;
}
-static inline void kvm_migrate_apic_timer(struct kvm_vcpu *vcpu)
+static inline void kvm_migrate_timers(struct kvm_vcpu *vcpu)
{
set_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests);
}
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 4a92fba..e57e5d0 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -111,13 +111,10 @@
/* various global constants */
LIBATA_MAX_PRD = ATA_MAX_PRD / 2,
LIBATA_DUMB_MAX_PRD = ATA_MAX_PRD / 4, /* Worst case */
- ATA_MAX_PORTS = 8,
ATA_DEF_QUEUE = 1,
/* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */
ATA_MAX_QUEUE = 32,
ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1,
- ATA_MAX_BUS = 2,
- ATA_DEF_BUSY_WAIT = 10000,
ATA_SHORT_PAUSE = (HZ >> 6) + 1,
ATAPI_MAX_DRAIN = 16 << 10,
@@ -1435,7 +1432,8 @@
extern void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc);
extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
extern u8 ata_sff_check_status(struct ata_port *ap);
-extern u8 ata_sff_altstatus(struct ata_port *ap);
+extern void ata_sff_pause(struct ata_port *ap);
+extern void ata_sff_dma_pause(struct ata_port *ap);
extern int ata_sff_busy_sleep(struct ata_port *ap,
unsigned long timeout_pat, unsigned long timeout);
extern int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline);
@@ -1496,19 +1494,6 @@
#endif /* CONFIG_PCI */
/**
- * ata_sff_pause - Flush writes and pause 400 nanoseconds.
- * @ap: Port to wait for.
- *
- * LOCKING:
- * Inherited from caller.
- */
-static inline void ata_sff_pause(struct ata_port *ap)
-{
- ata_sff_altstatus(ap);
- ndelay(400);
-}
-
-/**
* ata_sff_busy_wait - Wait for a port status register
* @ap: Port to wait for.
* @bits: bits that must be clear
diff --git a/include/linux/math64.h b/include/linux/math64.h
index c1a5f81..c87f152 100644
--- a/include/linux/math64.h
+++ b/include/linux/math64.h
@@ -81,4 +81,25 @@
}
#endif
+u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder);
+
+static __always_inline u32
+__iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder)
+{
+ u32 ret = 0;
+
+ while (dividend >= divisor) {
+ /* The following asm() prevents the compiler from
+ optimising this loop into a modulo operation. */
+ asm("" : "+rm"(dividend));
+
+ dividend -= divisor;
+ ret++;
+ }
+
+ *remainder = dividend;
+
+ return ret;
+}
+
#endif /* _LINUX_MATH64_H */
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index 73e3586..ea9f5ad 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -77,14 +77,6 @@
extern int __remove_pages(struct zone *zone, unsigned long start_pfn,
unsigned long nr_pages);
-/*
- * Walk through all memory which is registered as resource.
- * arg is (start_pfn, nr_pages, private_arg_pointer)
- */
-extern int walk_memory_resource(unsigned long start_pfn,
- unsigned long nr_pages, void *arg,
- int (*func)(unsigned long, unsigned long, void *));
-
#ifdef CONFIG_NUMA
extern int memory_add_physaddr_to_nid(u64 start);
#else
@@ -199,6 +191,14 @@
#endif /* ! CONFIG_MEMORY_HOTPLUG */
+/*
+ * Walk through all memory which is registered as resource.
+ * arg is (start_pfn, nr_pages, private_arg_pointer)
+ */
+extern int walk_memory_resource(unsigned long start_pfn,
+ unsigned long nr_pages, void *arg,
+ int (*func)(unsigned long, unsigned long, void *));
+
extern int add_memory(int nid, u64 start, u64 size);
extern int arch_add_memory(int nid, u64 start, u64 size);
extern int remove_memory(u64 start, u64 size);
diff --git a/include/linux/mm.h b/include/linux/mm.h
index c31a9cd..586a943 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -760,16 +760,17 @@
* (see walk_page_range for more details)
*/
struct mm_walk {
- int (*pgd_entry)(pgd_t *, unsigned long, unsigned long, void *);
- int (*pud_entry)(pud_t *, unsigned long, unsigned long, void *);
- int (*pmd_entry)(pmd_t *, unsigned long, unsigned long, void *);
- int (*pte_entry)(pte_t *, unsigned long, unsigned long, void *);
- int (*pte_hole)(unsigned long, unsigned long, void *);
+ int (*pgd_entry)(pgd_t *, unsigned long, unsigned long, struct mm_walk *);
+ int (*pud_entry)(pud_t *, unsigned long, unsigned long, struct mm_walk *);
+ int (*pmd_entry)(pmd_t *, unsigned long, unsigned long, struct mm_walk *);
+ int (*pte_entry)(pte_t *, unsigned long, unsigned long, struct mm_walk *);
+ int (*pte_hole)(unsigned long, unsigned long, struct mm_walk *);
+ struct mm_struct *mm;
+ void *private;
};
-int walk_page_range(const struct mm_struct *, unsigned long addr,
- unsigned long end, const struct mm_walk *walk,
- void *private);
+int walk_page_range(unsigned long addr, unsigned long end,
+ struct mm_walk *walk);
void free_pgd_range(struct mmu_gather **tlb, unsigned long addr,
unsigned long end, unsigned long floor, unsigned long ceiling);
void free_pgtables(struct mmu_gather **tlb, struct vm_area_struct *start_vma,
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index b03b274..81cd36b 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -57,12 +57,6 @@
#define MSDOS_DOT ". " /* ".", padded to MSDOS_NAME chars */
#define MSDOS_DOTDOT ".. " /* "..", padded to MSDOS_NAME chars */
-/* media of boot sector */
-static inline int fat_valid_media(u8 media)
-{
- return 0xf8 <= media || media == 0xf0;
-}
-
#define FAT_FIRST_ENT(s, x) ((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
@@ -334,6 +328,12 @@
#endif
}
+/* media of boot sector */
+static inline int fat_valid_media(u8 media)
+{
+ return 0xf8 <= media || media == 0xf0;
+}
+
/* fat/cache.c */
extern void fat_cache_inval_inode(struct inode *inode);
extern int fat_get_cluster(struct inode *inode, int cluster,
diff --git a/include/linux/msg.h b/include/linux/msg.h
index 6f3b8e7..56abf155 100644
--- a/include/linux/msg.h
+++ b/include/linux/msg.h
@@ -64,11 +64,11 @@
#define MSGMNB 16384 /* <= INT_MAX */ /* default max size of a message queue */
/* unused */
-#define MSGPOOL (MSGMNI * MSGMNB) /* size in bytes of message pool */
+#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */
#define MSGTQL MSGMNB /* number of system message headers */
#define MSGMAP MSGMNB /* number of entries in message map */
#define MSGSSZ 16 /* message segment size */
-#define __MSGSEG (MSGPOOL / MSGSSZ) /* max no. of segments */
+#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */
#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff)
#ifdef __KERNEL__
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index c42bc7f..53ea3dc 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -1,7 +1,7 @@
/*
* linux/include/linux/mtd/nand.h
*
- * Copyright (c) 2000 David Woodhouse <dwmw2@mvhi.com>
+ * Copyright (c) 2000 David Woodhouse <dwmw2@infradead.org>
* Steven J. Hill <sjhill@realitydiluted.com>
* Thomas Gleixner <tglx@linutronix.de>
*
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index f27fd20..25f8710 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -88,6 +88,8 @@
#define NETDEV_TX_BUSY 1 /* driver tx path was busy*/
#define NETDEV_TX_LOCKED -1 /* driver tx lock was already taken */
+#ifdef __KERNEL__
+
/*
* Compute the worst case header length according to the protocols
* used.
@@ -114,6 +116,8 @@
#define MAX_HEADER (LL_MAX_HEADER + 48)
#endif
+#endif /* __KERNEL__ */
+
struct net_device_subqueue
{
/* Give a control state for each queue. This struct may contain
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 590cff3..f31debf 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -306,5 +306,29 @@
}
#endif /* !PAGEFLAGS_EXTENDED */
+
+#define PAGE_FLAGS (1 << PG_lru | 1 << PG_private | 1 << PG_locked | \
+ 1 << PG_buddy | 1 << PG_writeback | \
+ 1 << PG_slab | 1 << PG_swapcache | 1 << PG_active)
+
+/*
+ * Flags checked in bad_page(). Pages on the free list should not have
+ * these flags set. It they are, there is a problem.
+ */
+#define PAGE_FLAGS_CLEAR_WHEN_BAD (PAGE_FLAGS | 1 << PG_reclaim | 1 << PG_dirty)
+
+/*
+ * Flags checked when a page is freed. Pages being freed should not have
+ * these flags set. It they are, there is a problem.
+ */
+#define PAGE_FLAGS_CHECK_AT_FREE (PAGE_FLAGS | 1 << PG_reserved)
+
+/*
+ * Flags checked when a page is prepped for return by the page allocator.
+ * Pages being prepped should not have these flags set. It they are, there
+ * is a problem.
+ */
+#define PAGE_FLAGS_CHECK_AT_PREP (PAGE_FLAGS | 1 << PG_reserved | 1 << PG_dirty)
+
#endif /* !__GENERATING_BOUNDS_H */
#endif /* PAGE_FLAGS_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 509159b..d18b1dd 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -206,6 +206,7 @@
struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
int rom_attr_enabled; /* has display of the rom attribute been enabled? */
struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */
+ struct bin_attribute *res_attr_wc[DEVICE_COUNT_RESOURCE]; /* sysfs file for WC mapping of resources */
#ifdef CONFIG_PCI_MSI
struct list_head msi_list;
#endif
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 9b940e6..6595382 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -716,6 +716,7 @@
#define PCI_DEVICE_ID_HP_CISSA 0x3220
#define PCI_DEVICE_ID_HP_CISSC 0x3230
#define PCI_DEVICE_ID_HP_CISSD 0x3238
+#define PCI_DEVICE_ID_HP_CISSE 0x323a
#define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031
#define PCI_VENDOR_ID_PCTECH 0x1042
@@ -1519,6 +1520,7 @@
#define PCI_DEVICE_ID_MARVELL_GT64260 0x6430
#define PCI_DEVICE_ID_MARVELL_MV64360 0x6460
#define PCI_DEVICE_ID_MARVELL_MV64460 0x6480
+#define PCI_DEVICE_ID_MARVELL_CAFE_SD 0x4101
#define PCI_VENDOR_ID_V3 0x11b0
#define PCI_DEVICE_ID_V3_V960 0x0001
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index 9883bc9..fff1d27 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -9,6 +9,8 @@
struct net;
struct completion;
+struct mm_struct;
+
/*
* The proc filesystem constants/structures
*/
@@ -101,8 +103,6 @@
extern void proc_root_init(void);
extern void proc_misc_init(void);
-struct mm_struct;
-
void proc_flush_task(struct task_struct *task);
struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, struct nameidata *);
int proc_pid_readdir(struct file * filp, void * dirent, filldir_t filldir);
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
new file mode 100644
index 0000000..bde4586
--- /dev/null
+++ b/include/linux/rculist.h
@@ -0,0 +1,6 @@
+#ifndef _LINUX_RCULIST_H
+#define _LINUX_RCULIST_H
+
+#include <linux/list.h>
+
+#endif /* _LINUX_RCULIST_H */
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index 44c81c7..b358c70 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -246,6 +246,7 @@
{
RT_TABLE_UNSPEC=0,
/* User defined values */
+ RT_TABLE_COMPAT=252,
RT_TABLE_DEFAULT=253,
RT_TABLE_MAIN=254,
RT_TABLE_LOCAL=255,
@@ -267,10 +268,10 @@
RTA_PREFSRC,
RTA_METRICS,
RTA_MULTIPATH,
- RTA_PROTOINFO,
+ RTA_PROTOINFO, /* no longer used */
RTA_FLOW,
RTA_CACHEINFO,
- RTA_SESSION,
+ RTA_SESSION, /* no longer used */
RTA_MP_ALGO, /* no longer used */
RTA_TABLE,
__RTA_MAX
diff --git a/include/linux/sched.h b/include/linux/sched.h
index ae0be3c..c5d3f84 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -2026,6 +2026,19 @@
return signal_pending(p) && __fatal_signal_pending(p);
}
+static inline int signal_pending_state(long state, struct task_struct *p)
+{
+ if (!(state & (TASK_INTERRUPTIBLE | TASK_WAKEKILL)))
+ return 0;
+ if (!signal_pending(p))
+ return 0;
+
+ if (state & (__TASK_STOPPED | __TASK_TRACED))
+ return 0;
+
+ return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p);
+}
+
static inline int need_resched(void)
{
return unlikely(test_thread_flag(TIF_NEED_RESCHED));
diff --git a/include/linux/securebits.h b/include/linux/securebits.h
index c1f19db..92f09bd 100644
--- a/include/linux/securebits.h
+++ b/include/linux/securebits.h
@@ -7,14 +7,15 @@
inheritance of root-permissions and suid-root executable under
compatibility mode. We raise the effective and inheritable bitmasks
*of the executable file* if the effective uid of the new process is
- 0. If the real uid is 0, we raise the inheritable bitmask of the
+ 0. If the real uid is 0, we raise the effective (legacy) bit of the
executable file. */
#define SECURE_NOROOT 0
#define SECURE_NOROOT_LOCKED 1 /* make bit-0 immutable */
-/* When set, setuid to/from uid 0 does not trigger capability-"fixes"
- to be compatible with old programs relying on set*uid to loose
- privileges. When unset, setuid doesn't change privileges. */
+/* When set, setuid to/from uid 0 does not trigger capability-"fixup".
+ When unset, to provide compatiblility with old programs relying on
+ set*uid to gain/lose privilege, transitions to/from uid 0 cause
+ capabilities to be gained/lost. */
#define SECURE_NO_SETUID_FIXUP 2
#define SECURE_NO_SETUID_FIXUP_LOCKED 3 /* make bit-2 immutable */
@@ -26,10 +27,10 @@
#define SECURE_KEEP_CAPS 4
#define SECURE_KEEP_CAPS_LOCKED 5 /* make bit-4 immutable */
-/* Each securesetting is implemented using two bits. One bit specify
+/* Each securesetting is implemented using two bits. One bit specifies
whether the setting is on or off. The other bit specify whether the
- setting is fixed or not. A setting which is fixed cannot be changed
- from user-level. */
+ setting is locked or not. A setting which is locked cannot be
+ changed from user-level. */
#define issecure_mask(X) (1 << (X))
#define issecure(X) (issecure_mask(X) & current->securebits)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index d32123a..d8f31de 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -192,6 +192,7 @@
void (*shutdown)(struct uart_port *);
void (*set_termios)(struct uart_port *, struct ktermios *new,
struct ktermios *old);
+ void (*set_ldisc)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int oldstate);
int (*set_wake)(struct uart_port *, unsigned int state);
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 805ed4b..9aa90a6 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -1,7 +1,7 @@
/*
* Written by Mark Hemment, 1996 (markhe@nextd.demon.co.uk).
*
- * (C) SGI 2006, Christoph Lameter <clameter@sgi.com>
+ * (C) SGI 2006, Christoph Lameter
* Cleaned up and restructured to ease the addition of alternative
* implementations of SLAB allocators.
*/
@@ -276,6 +276,17 @@
return kmalloc(size, flags | __GFP_ZERO);
}
+/**
+ * kzalloc_node - allocate zeroed memory from a particular memory node.
+ * @size: how many bytes of memory are required.
+ * @flags: the type of memory to allocate (see kmalloc).
+ * @node: memory node from which to allocate
+ */
+static inline void *kzalloc_node(size_t size, gfp_t flags, int node)
+{
+ return kmalloc_node(size, flags | __GFP_ZERO, node);
+}
+
#ifdef CONFIG_SLABINFO
extern const struct seq_operations slabinfo_op;
ssize_t slabinfo_write(struct file *, const char __user *, size_t, loff_t *);
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index 71e43a1..d117ea2 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -4,7 +4,7 @@
/*
* SLUB : A Slab allocator without object queues.
*
- * (C) 2007 SGI, Christoph Lameter <clameter@sgi.com>
+ * (C) 2007 SGI, Christoph Lameter
*/
#include <linux/types.h>
#include <linux/gfp.h>
@@ -137,10 +137,12 @@
if (size <= KMALLOC_MIN_SIZE)
return KMALLOC_SHIFT_LOW;
+#if KMALLOC_MIN_SIZE <= 64
if (size > 64 && size <= 96)
return 1;
if (size > 128 && size <= 192)
return 2;
+#endif
if (size <= 8) return 3;
if (size <= 16) return 4;
if (size <= 32) return 5;
diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h
index e9bbe3e..d5ca78b 100644
--- a/include/linux/spi/mmc_spi.h
+++ b/include/linux/spi/mmc_spi.h
@@ -1,6 +1,8 @@
#ifndef __LINUX_SPI_MMC_SPI_H
#define __LINUX_SPI_MMC_SPI_H
+#include <linux/interrupt.h>
+
struct device;
struct mmc_host;
diff --git a/include/linux/ssb/ssb_driver_gige.h b/include/linux/ssb/ssb_driver_gige.h
index 01fbdf5..942e387 100644
--- a/include/linux/ssb/ssb_driver_gige.h
+++ b/include/linux/ssb/ssb_driver_gige.h
@@ -100,7 +100,7 @@
/* Get the device MAC address */
static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
{
-#ifdef CONFIG_BCM947XX
+#ifdef CONFIG_BCM47XX
char *res = nvram_get("et0macaddr");
if (res)
memcpy(macaddr, res, 6);
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 18e62e3..b31b6b7 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -239,11 +239,6 @@
return (struct tcp_request_sock *)req;
}
-struct tcp_deferred_accept_info {
- struct sock *listen_sk;
- struct request_sock *request;
-};
-
struct tcp_sock {
/* inet_connection_sock has to be the first member of tcp_sock */
struct inet_connection_sock inet_conn;
@@ -379,8 +374,6 @@
unsigned int keepalive_intvl; /* time interval between keep alive probes */
int linger2;
- struct tcp_deferred_accept_info defer_tcp_accept;
-
unsigned long last_synq_overflow;
u32 tso_deferred;
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 06d3e6e..917707e 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -66,8 +66,7 @@
((long)t-2732+5)/10 : ((long)t-2732-5)/10)
#define CELSIUS_TO_KELVIN(t) ((t)*10+2732)
-#if defined(CONFIG_HWMON) || \
- (defined(CONFIG_HWMON_MODULE) && defined(CONFIG_THERMAL_MODULE))
+#if defined(CONFIG_THERMAL_HWMON)
/* thermal zone devices with the same type share one hwmon device */
struct thermal_hwmon_device {
char type[THERMAL_NAME_LENGTH];
@@ -94,8 +93,7 @@
struct idr idr;
struct mutex lock; /* protect cooling devices list */
struct list_head node;
-#if defined(CONFIG_HWMON) || \
- (defined(CONFIG_HWMON_MODULE) && defined(CONFIG_THERMAL_MODULE))
+#if defined(CONFIG_THERMAL_HWMON)
struct list_head hwmon_node;
struct thermal_hwmon_device *hwmon;
struct thermal_hwmon_attr temp_input; /* hwmon sys attr */
diff --git a/include/linux/time.h b/include/linux/time.h
index d32ef0a..e15206a 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -6,6 +6,7 @@
#ifdef __KERNEL__
# include <linux/cache.h>
# include <linux/seqlock.h>
+# include <linux/math64.h>
#endif
#ifndef _STRUCT_TIMESPEC
@@ -169,18 +170,13 @@
* timespec_add_ns - Adds nanoseconds to a timespec
* @a: pointer to timespec to be incremented
* @ns: unsigned nanoseconds value to be added
+ *
+ * This must always be inlined because its used from the x86-64 vdso,
+ * which cannot call other kernel functions.
*/
-static inline void timespec_add_ns(struct timespec *a, u64 ns)
+static __always_inline void timespec_add_ns(struct timespec *a, u64 ns)
{
- ns += a->tv_nsec;
- while(unlikely(ns >= NSEC_PER_SEC)) {
- /* The following asm() prevents the compiler from
- * optimising this loop into a modulo operation. */
- asm("" : "+r"(ns));
-
- ns -= NSEC_PER_SEC;
- a->tv_sec++;
- }
+ a->tv_sec += __iter_div_u64_rem(a->tv_nsec + ns, NSEC_PER_SEC, &ns);
a->tv_nsec = ns;
}
#endif /* __KERNEL__ */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 7f7121f..324a3b2 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -36,7 +36,7 @@
#define N_6PACK 7
#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */
#define N_R3964 9 /* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */
+#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */
#define N_IRDA 11 /* Linux IrDa - http://irda.sourceforge.net/ */
#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data */
/* cards about SMS messages */
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 59f1c0b..d2a0035 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -27,8 +27,7 @@
* This routine is called by the kernel to write a series of
* characters to the tty device. The characters may come from
* user space or kernel space. This routine will return the
- * number of characters actually accepted for writing. This
- * routine is mandatory.
+ * number of characters actually accepted for writing.
*
* Optional: Required for writable devices.
*
@@ -134,7 +133,7 @@
* This routine notifies the tty driver that it should hangup the
* tty device.
*
- * Required:
+ * Optional:
*
* void (*break_ctl)(struct tty_stuct *tty, int state);
*
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index c141118..4a535ea 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -865,9 +865,9 @@
#define V4L2_CID_HFLIP (V4L2_CID_BASE+20)
#define V4L2_CID_VFLIP (V4L2_CID_BASE+21)
-/* Deprecated, use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */
-#define V4L2_CID_HCENTER_DEPRECATED (V4L2_CID_BASE+22)
-#define V4L2_CID_VCENTER_DEPRECATED (V4L2_CID_BASE+23)
+/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */
+#define V4L2_CID_HCENTER (V4L2_CID_BASE+22)
+#define V4L2_CID_VCENTER (V4L2_CID_BASE+23)
#define V4L2_CID_POWER_LINE_FREQUENCY (V4L2_CID_BASE+24)
enum v4l2_power_line_frequency {
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index d4695a3..5f79a5f 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -10,18 +10,19 @@
#define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */
#define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */
#define VIRTIO_BLK_F_GEOMETRY 4 /* Legacy geometry available */
+#define VIRTIO_BLK_F_RO 5 /* Disk is read-only */
struct virtio_blk_config
{
/* The capacity (in 512-byte sectors). */
- __le64 capacity;
+ __u64 capacity;
/* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
- __le32 size_max;
+ __u32 size_max;
/* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
- __le32 seg_max;
+ __u32 seg_max;
/* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */
struct virtio_blk_geometry {
- __le16 cylinders;
+ __u16 cylinders;
__u8 heads;
__u8 sectors;
} geometry;
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index 50db245..f364bbf 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -15,6 +15,10 @@
/* We've given up on this device. */
#define VIRTIO_CONFIG_S_FAILED 0x80
+/* Do we get callbacks when the ring is completely used, even if we've
+ * suppressed them? */
+#define VIRTIO_F_NOTIFY_ON_EMPTY 24
+
#ifdef __KERNEL__
#include <linux/virtio.h>
@@ -99,7 +103,7 @@
* The return value is -ENOENT if the feature doesn't exist. Otherwise
* the config value is copied into whatever is pointed to by v. */
#define virtio_config_val(vdev, fbit, offset, v) \
- virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(v))
+ virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(*v))
static inline int virtio_config_buf(struct virtio_device *vdev,
unsigned int fbit,
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 9405aa6..38c0571 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -38,7 +38,7 @@
#define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set
__u8 gso_type;
__u16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
- __u16 gso_size; /* Bytes to append to gso_hdr_len per frame */
+ __u16 gso_size; /* Bytes to append to hdr_len per frame */
__u16 csum_start; /* Position to start checksumming from */
__u16 csum_offset; /* Offset after that to place checksum */
};
diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h
new file mode 100644
index 0000000..331afb6
--- /dev/null
+++ b/include/linux/virtio_rng.h
@@ -0,0 +1,8 @@
+#ifndef _LINUX_VIRTIO_RNG_H
+#define _LINUX_VIRTIO_RNG_H
+#include <linux/virtio_config.h>
+
+/* The ID for virtio_rng */
+#define VIRTIO_ID_RNG 4
+
+#endif /* _LINUX_VIRTIO_RNG_H */
diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h
index 4d13732..6f69968 100644
--- a/include/linux/wm97xx.h
+++ b/include/linux/wm97xx.h
@@ -100,6 +100,7 @@
#define WM9713_ADCSEL_Y 0x0004 /* Y measurement */
#define WM9713_ADCSEL_PRES 0x0008 /* Pressure measurement */
#define WM9713_COO 0x0001 /* enable coordinate mode */
+#define WM9713_45W 0x1000 /* set for 5 wire panel */
#define WM9713_PDEN 0x0800 /* measure only when pen down */
#define WM9713_ADCSEL_MASK 0x00fe /* ADC selection mask */
#define WM9713_WAIT 0x0200 /* coordinate wait */
diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h
index 2ca6bae..fb0c215 100644
--- a/include/linux/xfrm.h
+++ b/include/linux/xfrm.h
@@ -339,6 +339,7 @@
#define XFRM_STATE_NOPMTUDISC 4
#define XFRM_STATE_WILDRECV 8
#define XFRM_STATE_ICMP 16
+#define XFRM_STATE_AF_UNSPEC 32
};
struct xfrm_usersa_id {
diff --git a/include/media/cx25840.h b/include/media/cx25840.h
index cd599ad..db431d5 100644
--- a/include/media/cx25840.h
+++ b/include/media/cx25840.h
@@ -32,12 +32,16 @@
CX25840_COMPOSITE7,
CX25840_COMPOSITE8,
- /* S-Video inputs consist of one luma input (In1-In4) ORed with one
+ /* S-Video inputs consist of one luma input (In1-In8) ORed with one
chroma input (In5-In8) */
CX25840_SVIDEO_LUMA1 = 0x10,
CX25840_SVIDEO_LUMA2 = 0x20,
CX25840_SVIDEO_LUMA3 = 0x30,
CX25840_SVIDEO_LUMA4 = 0x40,
+ CX25840_SVIDEO_LUMA5 = 0x50,
+ CX25840_SVIDEO_LUMA6 = 0x60,
+ CX25840_SVIDEO_LUMA7 = 0x70,
+ CX25840_SVIDEO_LUMA8 = 0x80,
CX25840_SVIDEO_CHROMA4 = 0x400,
CX25840_SVIDEO_CHROMA5 = 0x500,
CX25840_SVIDEO_CHROMA6 = 0x600,
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
index bfee8be..b8e8aa9 100644
--- a/include/media/ir-common.h
+++ b/include/media/ir-common.h
@@ -146,6 +146,7 @@
extern IR_KEYTAB_TYPE ir_codes_pinnacle_pctv_hd[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_genius_tvgo_a11mce[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE];
#endif
diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h
index a807d2f..859f7a6 100644
--- a/include/media/v4l2-dev.h
+++ b/include/media/v4l2-dev.h
@@ -40,10 +40,9 @@
#define VFL_TYPE_VTX 3
/* Video standard functions */
-extern unsigned int v4l2_video_std_fps(struct v4l2_standard *vs);
-extern char *v4l2_norm_to_name(v4l2_std_id id);
+extern const char *v4l2_norm_to_name(v4l2_std_id id);
extern int v4l2_video_std_construct(struct v4l2_standard *vs,
- int id, char *name);
+ int id, const char *name);
/* Prints the ioctl in a human-readable format */
extern void v4l_printk_ioctl(unsigned int cmd);
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index 0a2f037..bbd3d58 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -94,6 +94,28 @@
extern void addrconf_leave_solict(struct inet6_dev *idev,
struct in6_addr *addr);
+static inline unsigned long addrconf_timeout_fixup(u32 timeout,
+ unsigned unit)
+{
+ if (timeout == 0xffffffff)
+ return ~0UL;
+
+ /*
+ * Avoid arithmetic overflow.
+ * Assuming unit is constant and non-zero, this "if" statement
+ * will go away on 64bit archs.
+ */
+ if (0xfffffffe > LONG_MAX / unit && timeout > LONG_MAX / unit)
+ return LONG_MAX / unit;
+
+ return timeout;
+}
+
+static inline int addrconf_finite_timeout(unsigned long timeout)
+{
+ return ~timeout;
+}
+
/*
* IPv6 Address Label subsystem (addrlabel.c)
*/
diff --git a/include/net/genetlink.h b/include/net/genetlink.h
index decdda5..747c255 100644
--- a/include/net/genetlink.h
+++ b/include/net/genetlink.h
@@ -162,9 +162,9 @@
* @skb: socket buffer the message is stored in
* @hdr: generic netlink message header
*/
-static inline int genlmsg_cancel(struct sk_buff *skb, void *hdr)
+static inline void genlmsg_cancel(struct sk_buff *skb, void *hdr)
{
- return nlmsg_cancel(skb, hdr - GENL_HDRLEN - NLMSG_HDRLEN);
+ nlmsg_cancel(skb, hdr - GENL_HDRLEN - NLMSG_HDRLEN);
}
/**
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index a42cd63..9fabe5b 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -197,4 +197,14 @@
return skb->rtable->rt_iif;
}
+static inline struct request_sock *inet_reqsk_alloc(struct request_sock_ops *ops)
+{
+ struct request_sock *req = reqsk_alloc(ops);
+
+ if (req != NULL)
+ inet_rsk(req)->opt = NULL;
+
+ return req;
+}
+
#endif /* _INET_SOCK_H */
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index e0a612b..f422f72 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -367,6 +367,12 @@
a->s6_addr32[2] | a->s6_addr32[3] ) == 0);
}
+static inline int ipv6_addr_loopback(const struct in6_addr *a)
+{
+ return ((a->s6_addr32[0] | a->s6_addr32[1] |
+ a->s6_addr32[2] | (a->s6_addr32[3] ^ htonl(1))) == 0);
+}
+
static inline int ipv6_addr_v4mapped(const struct in6_addr *a)
{
return ((a->s6_addr32[0] | a->s6_addr32[1] |
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index dae3f9e..bcd1623 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -595,6 +595,15 @@
ALG_CCMP,
};
+/**
+ * enum ieee80211_key_len - key length
+ * @WEP40: WEP 5 byte long key
+ * @WEP104: WEP 13 byte long key
+ */
+enum ieee80211_key_len {
+ LEN_WEP40 = 5,
+ LEN_WEP104 = 13,
+};
/**
* enum ieee80211_key_flags - key flags
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index aa540e6..d9dd0f7 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -95,6 +95,11 @@
#ifdef CONFIG_NET_NS
extern void __put_net(struct net *net);
+static inline int net_alive(struct net *net)
+{
+ return net && atomic_read(&net->count);
+}
+
static inline struct net *get_net(struct net *net)
{
atomic_inc(&net->count);
@@ -125,6 +130,12 @@
return net1 == net2;
}
#else
+
+static inline int net_alive(struct net *net)
+{
+ return 1;
+}
+
static inline struct net *get_net(struct net *net)
{
return net;
diff --git a/include/net/netfilter/nf_conntrack_extend.h b/include/net/netfilter/nf_conntrack_extend.h
index f736e84..f80c0ed 100644
--- a/include/net/netfilter/nf_conntrack_extend.h
+++ b/include/net/netfilter/nf_conntrack_extend.h
@@ -15,6 +15,7 @@
/* Extensions: optional stuff which isn't permanently in struct. */
struct nf_ct_ext {
+ struct rcu_head rcu;
u8 offset[NF_CT_EXT_NUM];
u8 len;
char data[0];
diff --git a/include/net/netlink.h b/include/net/netlink.h
index 112dcdf..dfc3701 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -556,14 +556,12 @@
* @skb: socket buffer the message is stored in
* @mark: mark to trim to
*
- * Trims the message to the provided mark. Returns -1.
+ * Trims the message to the provided mark.
*/
-static inline int nlmsg_trim(struct sk_buff *skb, const void *mark)
+static inline void nlmsg_trim(struct sk_buff *skb, const void *mark)
{
if (mark)
skb_trim(skb, (unsigned char *) mark - skb->data);
-
- return -1;
}
/**
@@ -572,11 +570,11 @@
* @nlh: netlink message header
*
* Removes the complete netlink message including all
- * attributes from the socket buffer again. Returns -1.
+ * attributes from the socket buffer again.
*/
-static inline int nlmsg_cancel(struct sk_buff *skb, struct nlmsghdr *nlh)
+static inline void nlmsg_cancel(struct sk_buff *skb, struct nlmsghdr *nlh)
{
- return nlmsg_trim(skb, nlh);
+ nlmsg_trim(skb, nlh);
}
/**
@@ -775,7 +773,7 @@
int nested_len = nla_len(nla) - NLA_ALIGN(len);
if (nested_len < 0)
- return -1;
+ return -EINVAL;
if (nested_len >= nla_attr_size(0))
return nla_parse(tb, maxtype, nla_data(nla) + NLA_ALIGN(len),
nested_len, policy);
@@ -1080,11 +1078,11 @@
* @start: container attribute
*
* Removes the container attribute and including all nested
- * attributes. Returns -1.
+ * attributes. Returns -EMSGSIZE
*/
-static inline int nla_nest_cancel(struct sk_buff *skb, struct nlattr *start)
+static inline void nla_nest_cancel(struct sk_buff *skb, struct nlattr *start)
{
- return nlmsg_trim(skb, start);
+ nlmsg_trim(skb, start);
}
/**
diff --git a/include/net/request_sock.h b/include/net/request_sock.h
index b220b5f..0c96e7b 100644
--- a/include/net/request_sock.h
+++ b/include/net/request_sock.h
@@ -115,8 +115,8 @@
struct request_sock *rskq_accept_head;
struct request_sock *rskq_accept_tail;
rwlock_t syn_wait_lock;
- u16 rskq_defer_accept;
- /* 2 bytes hole, try to pack */
+ u8 rskq_defer_accept;
+ /* 3 bytes hole, try to pack */
struct listen_sock *listen_opt;
};
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index ab502ec..a87fc03 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -178,7 +178,7 @@
extern struct Qdisc *qdisc_create_dflt(struct net_device *dev,
struct Qdisc_ops *ops, u32 parentid);
extern void tcf_destroy(struct tcf_proto *tp);
-extern void tcf_destroy_chain(struct tcf_proto *fl);
+extern void tcf_destroy_chain(struct tcf_proto **fl);
static inline int __qdisc_enqueue_tail(struct sk_buff *skb, struct Qdisc *sch,
struct sk_buff_head *list)
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 0ce0443..7f25195 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -548,7 +548,8 @@
struct dst_entry *(*get_dst) (struct sctp_association *asoc,
union sctp_addr *daddr,
union sctp_addr *saddr);
- void (*get_saddr) (struct sctp_association *asoc,
+ void (*get_saddr) (struct sctp_sock *sk,
+ struct sctp_association *asoc,
struct dst_entry *dst,
union sctp_addr *daddr,
union sctp_addr *saddr);
@@ -587,6 +588,7 @@
int (*is_ce) (const struct sk_buff *sk);
void (*seq_dump_addr)(struct seq_file *seq,
union sctp_addr *addr);
+ void (*ecn_capable)(struct sock *sk);
__u16 net_header_len;
int sockaddr_len;
sa_family_t sa_family;
@@ -901,7 +903,10 @@
* calculation completes (i.e. the DATA chunk
* is SACK'd) clear this flag.
*/
- int rto_pending;
+ __u8 rto_pending;
+
+ /* Flag to track the current fast recovery state */
+ __u8 fast_recovery;
/*
* These are the congestion stats.
@@ -920,6 +925,9 @@
/* Data that has been sent, but not acknowledged. */
__u32 flight_size;
+ /* TSN marking the fast recovery exit point */
+ __u32 fast_recovery_exit;
+
/* Destination */
struct dst_entry *dst;
/* Source address. */
@@ -1044,7 +1052,7 @@
struct sctp_sock *);
void sctp_transport_pmtu(struct sctp_transport *);
void sctp_transport_free(struct sctp_transport *);
-void sctp_transport_reset_timers(struct sctp_transport *);
+void sctp_transport_reset_timers(struct sctp_transport *, int);
void sctp_transport_hold(struct sctp_transport *);
void sctp_transport_put(struct sctp_transport *);
void sctp_transport_update_rto(struct sctp_transport *, __u32);
@@ -1134,6 +1142,9 @@
/* How many unackd bytes do we have in-flight? */
__u32 outstanding_bytes;
+ /* Are we doing fast-rtx on this queue */
+ char fast_rtx;
+
/* Corked? */
char cork;
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 633147c..cf54034 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -139,7 +139,6 @@
#define MAX_TCP_KEEPINTVL 32767
#define MAX_TCP_KEEPCNT 127
#define MAX_TCP_SYNCNT 127
-#define MAX_TCP_ACCEPT_DEFERRED 65535
#define TCP_SYNQ_INTERVAL (HZ/5) /* Period of SYNACK timer */
@@ -433,7 +432,6 @@
extern int tcp_disconnect(struct sock *sk, int flags);
-extern void tcp_unhash(struct sock *sk);
/* From syncookies.c */
extern __u32 syncookie_secret[2][16-4+SHA_DIGEST_WORDS];
diff --git a/include/net/transp_v6.h b/include/net/transp_v6.h
index 27394e0..112934a 100644
--- a/include/net/transp_v6.h
+++ b/include/net/transp_v6.h
@@ -40,7 +40,8 @@
struct msghdr *msg,
struct sk_buff *skb);
-extern int datagram_send_ctl(struct msghdr *msg,
+extern int datagram_send_ctl(struct net *net,
+ struct msghdr *msg,
struct flowi *fl,
struct ipv6_txoptions *opt,
int *hlimit, int *tclass);
diff --git a/include/net/udp.h b/include/net/udp.h
index 3e55a99..ccce837 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -135,6 +135,7 @@
extern int udp_sendmsg(struct kiocb *iocb, struct sock *sk,
struct msghdr *msg, size_t len);
+extern void udp_flush_pending_frames(struct sock *sk);
extern int udp_rcv(struct sk_buff *skb);
extern int udp_ioctl(struct sock *sk, int cmd, unsigned long arg);
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 911a661..31d30b1 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -105,7 +105,6 @@
*/
IB_DEVICE_UD_IP_CSUM = (1<<18),
IB_DEVICE_UD_TSO = (1<<19),
- IB_DEVICE_SEND_W_INV = (1<<21),
};
enum ib_atomic_cap {
diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h
index 049edc5..9c309da 100644
--- a/include/sound/ac97_codec.h
+++ b/include/sound/ac97_codec.h
@@ -505,6 +505,7 @@
unsigned short pcmreg[3]; // PCM registers
unsigned short codec_cfg[3]; // CODEC_CFG bits
unsigned char swap_mic_linein; // AD1986/AD1986A only
+ unsigned char lo_as_master; /* LO as master */
} ad18xx;
unsigned int dev_flags; /* device specific */
} spec;
diff --git a/include/xen/interface/xen.h b/include/xen/interface/xen.h
index 9b018da..819a033 100644
--- a/include/xen/interface/xen.h
+++ b/include/xen/interface/xen.h
@@ -10,6 +10,7 @@
#define __XEN_PUBLIC_XEN_H__
#include <asm/xen/interface.h>
+#include <asm/pvclock-abi.h>
/*
* XEN "SYSTEM CALLS" (a.k.a. HYPERCALLS).
@@ -336,7 +337,7 @@
uint8_t evtchn_upcall_mask;
unsigned long evtchn_pending_sel;
struct arch_vcpu_info arch;
- struct vcpu_time_info time;
+ struct pvclock_vcpu_time_info time;
}; /* 64 bytes (x86) */
/*
@@ -384,9 +385,7 @@
* Wallclock time: updated only by control software. Guests should base
* their gettimeofday() syscall on this wallclock-base value.
*/
- uint32_t wc_version; /* Version counter: see vcpu_time_info_t. */
- uint32_t wc_sec; /* Secs 00:00:00 UTC, Jan 1, 1970. */
- uint32_t wc_nsec; /* Nsecs 00:00:00 UTC, Jan 1, 1970. */
+ struct pvclock_wall_clock wc;
struct arch_shared_info arch;
diff --git a/ipc/msg.c b/ipc/msg.c
index 32494e8..b4eee1c 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -98,20 +98,15 @@
if (allowed < MSGMNI) {
ns->msg_ctlmni = MSGMNI;
- goto out_callback;
+ return;
}
if (allowed > IPCMNI / nb_ns) {
ns->msg_ctlmni = IPCMNI / nb_ns;
- goto out_callback;
+ return;
}
ns->msg_ctlmni = allowed;
-
-out_callback:
-
- printk(KERN_INFO "msgmni has been set to %d for ipc namespace %p\n",
- ns->msg_ctlmni, ns);
}
void msg_init_ns(struct ipc_namespace *ns)
@@ -136,6 +131,10 @@
void __init msg_init(void)
{
msg_init_ns(&init_ipc_ns);
+
+ printk(KERN_INFO "msgmni has been set to %d\n",
+ init_ipc_ns.msg_ctlmni);
+
ipc_init_proc_interface("sysvipc/msg",
" key msqid perms cbytes qnum lspid lrpid uid gid cuid cgid stime rtime ctime\n",
IPC_MSG_IDS, sysvipc_msg_proc_show);
diff --git a/ipc/shm.c b/ipc/shm.c
index 554429a..790240c 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -894,8 +894,6 @@
if (!sfd)
goto out_put_dentry;
- err = -ENOMEM;
-
file = alloc_file(path.mnt, path.dentry, f_mode, &shm_file_operations);
if (!file)
goto out_free;
@@ -1060,16 +1058,16 @@
static int sysvipc_shm_proc_show(struct seq_file *s, void *it)
{
struct shmid_kernel *shp = it;
- char *format;
-#define SMALL_STRING "%10d %10d %4o %10u %5u %5u %5d %5u %5u %5u %5u %10lu %10lu %10lu\n"
-#define BIG_STRING "%10d %10d %4o %21u %5u %5u %5d %5u %5u %5u %5u %10lu %10lu %10lu\n"
+#if BITS_PER_LONG <= 32
+#define SIZE_SPEC "%10lu"
+#else
+#define SIZE_SPEC "%21lu"
+#endif
- if (sizeof(size_t) <= sizeof(int))
- format = SMALL_STRING;
- else
- format = BIG_STRING;
- return seq_printf(s, format,
+ return seq_printf(s,
+ "%10d %10d %4o " SIZE_SPEC " %5u %5u "
+ "%5lu %5u %5u %5u %5u %10lu %10lu %10lu\n",
shp->shm_perm.key,
shp->shm_perm.id,
shp->shm_perm.mode,
diff --git a/kernel/audit.c b/kernel/audit.c
index e8692a5..e092f1c 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -738,7 +738,7 @@
if (!audit_enabled && msg_type != AUDIT_USER_AVC)
return 0;
- err = audit_filter_user(&NETLINK_CB(skb), msg_type);
+ err = audit_filter_user(&NETLINK_CB(skb));
if (err == 1) {
err = 0;
if (msg_type == AUDIT_USER_TTY) {
@@ -779,7 +779,7 @@
}
/* fallthrough */
case AUDIT_LIST:
- err = audit_receive_filter(nlh->nlmsg_type, NETLINK_CB(skb).pid,
+ err = audit_receive_filter(msg_type, NETLINK_CB(skb).pid,
uid, seq, data, nlmsg_len(nlh),
loginuid, sessionid, sid);
break;
@@ -798,7 +798,7 @@
}
/* fallthrough */
case AUDIT_LIST_RULES:
- err = audit_receive_filter(nlh->nlmsg_type, NETLINK_CB(skb).pid,
+ err = audit_receive_filter(msg_type, NETLINK_CB(skb).pid,
uid, seq, data, nlmsg_len(nlh),
loginuid, sessionid, sid);
break;
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index 0e0bd27e..98c50cc 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -1544,6 +1544,7 @@
* @data: payload data
* @datasz: size of payload data
* @loginuid: loginuid of sender
+ * @sessionid: sessionid for netlink audit message
* @sid: SE Linux Security ID of sender
*/
int audit_receive_filter(int type, int pid, int uid, int seq, void *data,
@@ -1720,7 +1721,7 @@
return 1;
}
-int audit_filter_user(struct netlink_skb_parms *cb, int type)
+int audit_filter_user(struct netlink_skb_parms *cb)
{
enum audit_state state = AUDIT_DISABLED;
struct audit_entry *e;
diff --git a/kernel/capability.c b/kernel/capability.c
index 39e8193..901e0fd 100644
--- a/kernel/capability.c
+++ b/kernel/capability.c
@@ -53,11 +53,95 @@
}
/*
+ * Version 2 capabilities worked fine, but the linux/capability.h file
+ * that accompanied their introduction encouraged their use without
+ * the necessary user-space source code changes. As such, we have
+ * created a version 3 with equivalent functionality to version 2, but
+ * with a header change to protect legacy source code from using
+ * version 2 when it wanted to use version 1. If your system has code
+ * that trips the following warning, it is using version 2 specific
+ * capabilities and may be doing so insecurely.
+ *
+ * The remedy is to either upgrade your version of libcap (to 2.10+,
+ * if the application is linked against it), or recompile your
+ * application with modern kernel headers and this warning will go
+ * away.
+ */
+
+static void warn_deprecated_v2(void)
+{
+ static int warned;
+
+ if (!warned) {
+ char name[sizeof(current->comm)];
+
+ printk(KERN_INFO "warning: `%s' uses deprecated v2"
+ " capabilities in a way that may be insecure.\n",
+ get_task_comm(name, current));
+ warned = 1;
+ }
+}
+
+/*
+ * Version check. Return the number of u32s in each capability flag
+ * array, or a negative value on error.
+ */
+static int cap_validate_magic(cap_user_header_t header, unsigned *tocopy)
+{
+ __u32 version;
+
+ if (get_user(version, &header->version))
+ return -EFAULT;
+
+ switch (version) {
+ case _LINUX_CAPABILITY_VERSION_1:
+ warn_legacy_capability_use();
+ *tocopy = _LINUX_CAPABILITY_U32S_1;
+ break;
+ case _LINUX_CAPABILITY_VERSION_2:
+ warn_deprecated_v2();
+ /*
+ * fall through - v3 is otherwise equivalent to v2.
+ */
+ case _LINUX_CAPABILITY_VERSION_3:
+ *tocopy = _LINUX_CAPABILITY_U32S_3;
+ break;
+ default:
+ if (put_user((u32)_KERNEL_CAPABILITY_VERSION, &header->version))
+ return -EFAULT;
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
* For sys_getproccap() and sys_setproccap(), any of the three
* capability set pointers may be NULL -- indicating that that set is
* uninteresting and/or not to be changed.
*/
+/*
+ * Atomically modify the effective capabilities returning the original
+ * value. No permission check is performed here - it is assumed that the
+ * caller is permitted to set the desired effective capabilities.
+ */
+kernel_cap_t cap_set_effective(const kernel_cap_t pE_new)
+{
+ kernel_cap_t pE_old;
+
+ spin_lock(&task_capability_lock);
+
+ pE_old = current->cap_effective;
+ current->cap_effective = pE_new;
+
+ spin_unlock(&task_capability_lock);
+
+ return pE_old;
+}
+
+EXPORT_SYMBOL(cap_set_effective);
+
/**
* sys_capget - get the capabilities of a given process.
* @header: pointer to struct that contains capability version and
@@ -71,27 +155,13 @@
{
int ret = 0;
pid_t pid;
- __u32 version;
struct task_struct *target;
unsigned tocopy;
kernel_cap_t pE, pI, pP;
- if (get_user(version, &header->version))
- return -EFAULT;
-
- switch (version) {
- case _LINUX_CAPABILITY_VERSION_1:
- warn_legacy_capability_use();
- tocopy = _LINUX_CAPABILITY_U32S_1;
- break;
- case _LINUX_CAPABILITY_VERSION_2:
- tocopy = _LINUX_CAPABILITY_U32S_2;
- break;
- default:
- if (put_user(_LINUX_CAPABILITY_VERSION, &header->version))
- return -EFAULT;
- return -EINVAL;
- }
+ ret = cap_validate_magic(header, &tocopy);
+ if (ret != 0)
+ return ret;
if (get_user(pid, &header->pid))
return -EFAULT;
@@ -118,7 +188,7 @@
spin_unlock(&task_capability_lock);
if (!ret) {
- struct __user_cap_data_struct kdata[_LINUX_CAPABILITY_U32S];
+ struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S];
unsigned i;
for (i = 0; i < tocopy; i++) {
@@ -128,7 +198,7 @@
}
/*
- * Note, in the case, tocopy < _LINUX_CAPABILITY_U32S,
+ * Note, in the case, tocopy < _KERNEL_CAPABILITY_U32S,
* we silently drop the upper capabilities here. This
* has the effect of making older libcap
* implementations implicitly drop upper capability
@@ -240,30 +310,16 @@
*/
asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data)
{
- struct __user_cap_data_struct kdata[_LINUX_CAPABILITY_U32S];
+ struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S];
unsigned i, tocopy;
kernel_cap_t inheritable, permitted, effective;
- __u32 version;
struct task_struct *target;
int ret;
pid_t pid;
- if (get_user(version, &header->version))
- return -EFAULT;
-
- switch (version) {
- case _LINUX_CAPABILITY_VERSION_1:
- warn_legacy_capability_use();
- tocopy = _LINUX_CAPABILITY_U32S_1;
- break;
- case _LINUX_CAPABILITY_VERSION_2:
- tocopy = _LINUX_CAPABILITY_U32S_2;
- break;
- default:
- if (put_user(_LINUX_CAPABILITY_VERSION, &header->version))
- return -EFAULT;
- return -EINVAL;
- }
+ ret = cap_validate_magic(header, &tocopy);
+ if (ret != 0)
+ return ret;
if (get_user(pid, &header->pid))
return -EFAULT;
@@ -281,7 +337,7 @@
permitted.cap[i] = kdata[i].permitted;
inheritable.cap[i] = kdata[i].inheritable;
}
- while (i < _LINUX_CAPABILITY_U32S) {
+ while (i < _KERNEL_CAPABILITY_U32S) {
effective.cap[i] = 0;
permitted.cap[i] = 0;
inheritable.cap[i] = 0;
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 86ea9e3..798b3ab 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -797,8 +797,10 @@
retval = cpulist_parse(buf, trialcs.cpus_allowed);
if (retval < 0)
return retval;
+
+ if (!cpus_subset(trialcs.cpus_allowed, cpu_online_map))
+ return -EINVAL;
}
- cpus_and(trialcs.cpus_allowed, trialcs.cpus_allowed, cpu_online_map);
retval = validate_change(cs, &trialcs);
if (retval < 0)
return retval;
@@ -932,9 +934,11 @@
retval = nodelist_parse(buf, trialcs.mems_allowed);
if (retval < 0)
goto done;
+
+ if (!nodes_subset(trialcs.mems_allowed,
+ node_states[N_HIGH_MEMORY]))
+ return -EINVAL;
}
- nodes_and(trialcs.mems_allowed, trialcs.mems_allowed,
- node_states[N_HIGH_MEMORY]);
oldmem = cs->mems_allowed;
if (nodes_equal(oldmem, trialcs.mems_allowed)) {
retval = 0; /* Too easy - nothing to do */
@@ -1033,8 +1037,8 @@
static int update_relax_domain_level(struct cpuset *cs, s64 val)
{
- if ((int)val < 0)
- val = -1;
+ if (val < -1 || val >= SD_LV_MAX)
+ return -EINVAL;
if (val != cs->relax_domain_level) {
cs->relax_domain_level = val;
@@ -1878,7 +1882,7 @@
* in order to minimize text size.
*/
-static void common_cpu_mem_hotplug_unplug(void)
+static void common_cpu_mem_hotplug_unplug(int rebuild_sd)
{
cgroup_lock();
@@ -1886,6 +1890,13 @@
top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
scan_for_empty_cpusets(&top_cpuset);
+ /*
+ * Scheduler destroys domains on hotplug events.
+ * Rebuild them based on the current settings.
+ */
+ if (rebuild_sd)
+ rebuild_sched_domains();
+
cgroup_unlock();
}
@@ -1902,11 +1913,22 @@
static int cpuset_handle_cpuhp(struct notifier_block *unused_nb,
unsigned long phase, void *unused_cpu)
{
- if (phase == CPU_DYING || phase == CPU_DYING_FROZEN)
+ switch (phase) {
+ case CPU_UP_CANCELED:
+ case CPU_UP_CANCELED_FROZEN:
+ case CPU_DOWN_FAILED:
+ case CPU_DOWN_FAILED_FROZEN:
+ case CPU_ONLINE:
+ case CPU_ONLINE_FROZEN:
+ case CPU_DEAD:
+ case CPU_DEAD_FROZEN:
+ common_cpu_mem_hotplug_unplug(1);
+ break;
+ default:
return NOTIFY_DONE;
+ }
- common_cpu_mem_hotplug_unplug();
- return 0;
+ return NOTIFY_OK;
}
#ifdef CONFIG_MEMORY_HOTPLUG
@@ -1919,7 +1941,7 @@
void cpuset_track_online_nodes(void)
{
- common_cpu_mem_hotplug_unplug();
+ common_cpu_mem_hotplug_unplug(0);
}
#endif
diff --git a/kernel/exit.c b/kernel/exit.c
index 8f6185e..ceb2587 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -13,6 +13,7 @@
#include <linux/personality.h>
#include <linux/tty.h>
#include <linux/mnt_namespace.h>
+#include <linux/iocontext.h>
#include <linux/key.h>
#include <linux/security.h>
#include <linux/cpu.h>
diff --git a/kernel/fork.c b/kernel/fork.c
index 19908b2..b71ccd0 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -23,6 +23,7 @@
#include <linux/sem.h>
#include <linux/file.h>
#include <linux/fdtable.h>
+#include <linux/iocontext.h>
#include <linux/key.h>
#include <linux/binfmts.h>
#include <linux/mman.h>
diff --git a/kernel/futex.c b/kernel/futex.c
index 449def8..7d1136e 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -1096,21 +1096,64 @@
* private futexes.
*/
static int fixup_pi_state_owner(u32 __user *uaddr, struct futex_q *q,
- struct task_struct *newowner)
+ struct task_struct *newowner,
+ struct rw_semaphore *fshared)
{
u32 newtid = task_pid_vnr(newowner) | FUTEX_WAITERS;
struct futex_pi_state *pi_state = q->pi_state;
+ struct task_struct *oldowner = pi_state->owner;
u32 uval, curval, newval;
- int ret;
+ int ret, attempt = 0;
/* Owner died? */
+ if (!pi_state->owner)
+ newtid |= FUTEX_OWNER_DIED;
+
+ /*
+ * We are here either because we stole the rtmutex from the
+ * pending owner or we are the pending owner which failed to
+ * get the rtmutex. We have to replace the pending owner TID
+ * in the user space variable. This must be atomic as we have
+ * to preserve the owner died bit here.
+ *
+ * Note: We write the user space value _before_ changing the
+ * pi_state because we can fault here. Imagine swapped out
+ * pages or a fork, which was running right before we acquired
+ * mmap_sem, that marked all the anonymous memory readonly for
+ * cow.
+ *
+ * Modifying pi_state _before_ the user space value would
+ * leave the pi_state in an inconsistent state when we fault
+ * here, because we need to drop the hash bucket lock to
+ * handle the fault. This might be observed in the PID check
+ * in lookup_pi_state.
+ */
+retry:
+ if (get_futex_value_locked(&uval, uaddr))
+ goto handle_fault;
+
+ while (1) {
+ newval = (uval & FUTEX_OWNER_DIED) | newtid;
+
+ curval = cmpxchg_futex_value_locked(uaddr, uval, newval);
+
+ if (curval == -EFAULT)
+ goto handle_fault;
+ if (curval == uval)
+ break;
+ uval = curval;
+ }
+
+ /*
+ * We fixed up user space. Now we need to fix the pi_state
+ * itself.
+ */
if (pi_state->owner != NULL) {
spin_lock_irq(&pi_state->owner->pi_lock);
WARN_ON(list_empty(&pi_state->list));
list_del_init(&pi_state->list);
spin_unlock_irq(&pi_state->owner->pi_lock);
- } else
- newtid |= FUTEX_OWNER_DIED;
+ }
pi_state->owner = newowner;
@@ -1118,26 +1161,35 @@
WARN_ON(!list_empty(&pi_state->list));
list_add(&pi_state->list, &newowner->pi_state_list);
spin_unlock_irq(&newowner->pi_lock);
+ return 0;
/*
- * We own it, so we have to replace the pending owner
- * TID. This must be atomic as we have preserve the
- * owner died bit here.
+ * To handle the page fault we need to drop the hash bucket
+ * lock here. That gives the other task (either the pending
+ * owner itself or the task which stole the rtmutex) the
+ * chance to try the fixup of the pi_state. So once we are
+ * back from handling the fault we need to check the pi_state
+ * after reacquiring the hash bucket lock and before trying to
+ * do another fixup. When the fixup has been done already we
+ * simply return.
*/
- ret = get_futex_value_locked(&uval, uaddr);
+handle_fault:
+ spin_unlock(q->lock_ptr);
- while (!ret) {
- newval = (uval & FUTEX_OWNER_DIED) | newtid;
+ ret = futex_handle_fault((unsigned long)uaddr, fshared, attempt++);
- curval = cmpxchg_futex_value_locked(uaddr, uval, newval);
+ spin_lock(q->lock_ptr);
- if (curval == -EFAULT)
- ret = -EFAULT;
- if (curval == uval)
- break;
- uval = curval;
- }
- return ret;
+ /*
+ * Check if someone else fixed it for us:
+ */
+ if (pi_state->owner != oldowner)
+ return 0;
+
+ if (ret)
+ return ret;
+
+ goto retry;
}
/*
@@ -1507,7 +1559,7 @@
* that case:
*/
if (q.pi_state->owner != curr)
- ret = fixup_pi_state_owner(uaddr, &q, curr);
+ ret = fixup_pi_state_owner(uaddr, &q, curr, fshared);
} else {
/*
* Catch the rare case, where the lock was released
@@ -1539,7 +1591,8 @@
int res;
owner = rt_mutex_owner(&q.pi_state->pi_mutex);
- res = fixup_pi_state_owner(uaddr, &q, owner);
+ res = fixup_pi_state_owner(uaddr, &q, owner,
+ fshared);
/* propagate -EFAULT, if the fixup failed */
if (res)
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 421be5f..ab80515 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -1003,10 +1003,18 @@
*/
raise = timer->state == HRTIMER_STATE_PENDING;
+ /*
+ * We use preempt_disable to prevent this task from migrating after
+ * setting up the softirq and raising it. Otherwise, if me migrate
+ * we will raise the softirq on the wrong CPU.
+ */
+ preempt_disable();
+
unlock_hrtimer_base(timer, &flags);
if (raise)
hrtimer_raise_softirq();
+ preempt_enable();
return ret;
}
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index 14787de..3ec23c3 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -52,6 +52,7 @@
#include <asm/byteorder.h>
#include <asm/atomic.h>
#include <asm/system.h>
+#include <asm/unaligned.h>
static int kgdb_break_asap;
@@ -227,8 +228,6 @@
* GDB remote protocol parser:
*/
-static const char hexchars[] = "0123456789abcdef";
-
static int hex(char ch)
{
if ((ch >= 'a') && (ch <= 'f'))
@@ -316,8 +315,8 @@
}
kgdb_io_ops->write_char('#');
- kgdb_io_ops->write_char(hexchars[checksum >> 4]);
- kgdb_io_ops->write_char(hexchars[checksum & 0xf]);
+ kgdb_io_ops->write_char(hex_asc_hi(checksum));
+ kgdb_io_ops->write_char(hex_asc_lo(checksum));
if (kgdb_io_ops->flush)
kgdb_io_ops->flush();
@@ -478,8 +477,8 @@
{
error = -error;
pkt[0] = 'E';
- pkt[1] = hexchars[(error / 10)];
- pkt[2] = hexchars[(error % 10)];
+ pkt[1] = hex_asc[(error / 10)];
+ pkt[2] = hex_asc[(error % 10)];
pkt[3] = '\0';
}
@@ -510,10 +509,7 @@
scan = (unsigned char *)id;
while (i--)
*scan++ = 0;
- *scan++ = (value >> 24) & 0xff;
- *scan++ = (value >> 16) & 0xff;
- *scan++ = (value >> 8) & 0xff;
- *scan++ = (value & 0xff);
+ put_unaligned_be32(value, scan);
}
static struct task_struct *getthread(struct pt_regs *regs, int tid)
@@ -1503,7 +1499,8 @@
return 1;
}
-void kgdb_console_write(struct console *co, const char *s, unsigned count)
+static void kgdb_console_write(struct console *co, const char *s,
+ unsigned count)
{
unsigned long flags;
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 1e0250c..1485ca8 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -79,7 +79,7 @@
*
* For such cases, we now have a blacklist
*/
-struct kprobe_blackpoint kprobe_blacklist[] = {
+static struct kprobe_blackpoint kprobe_blacklist[] = {
{"preempt_schedule",},
{NULL} /* Terminator */
};
@@ -699,8 +699,9 @@
return -EINVAL;
for (i = 0; i < num; i++) {
ret = __register_kprobe(kps[i], called_from);
- if (ret < 0 && i > 0) {
- unregister_kprobes(kps, i);
+ if (ret < 0) {
+ if (i > 0)
+ unregister_kprobes(kps, i);
break;
}
}
@@ -776,8 +777,9 @@
jp->kp.break_handler = longjmp_break_handler;
ret = __register_kprobe(&jp->kp, called_from);
}
- if (ret < 0 && i > 0) {
- unregister_jprobes(jps, i);
+ if (ret < 0) {
+ if (i > 0)
+ unregister_jprobes(jps, i);
break;
}
}
@@ -920,8 +922,9 @@
return -EINVAL;
for (i = 0; i < num; i++) {
ret = __register_kretprobe(rps[i], called_from);
- if (ret < 0 && i > 0) {
- unregister_kretprobes(rps, i);
+ if (ret < 0) {
+ if (i > 0)
+ unregister_kretprobes(rps, i);
break;
}
}
diff --git a/kernel/printk.c b/kernel/printk.c
index 8fb01c3..e2129e8 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -666,7 +666,7 @@
return retval;
}
-const char printk_recursion_bug_msg [] =
+static const char printk_recursion_bug_msg [] =
KERN_CRIT "BUG: recent printk recursion!\n";
static int printk_recursion_bug;
diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c
index f4ffbd0..a38895a 100644
--- a/kernel/rcuclassic.c
+++ b/kernel/rcuclassic.c
@@ -89,8 +89,22 @@
/*
* Don't send IPI to itself. With irqs disabled,
* rdp->cpu is the current cpu.
+ *
+ * cpu_online_map is updated by the _cpu_down()
+ * using stop_machine_run(). Since we're in irqs disabled
+ * section, stop_machine_run() is not exectuting, hence
+ * the cpu_online_map is stable.
+ *
+ * However, a cpu might have been offlined _just_ before
+ * we disabled irqs while entering here.
+ * And rcu subsystem might not yet have handled the CPU_DEAD
+ * notification, leading to the offlined cpu's bit
+ * being set in the rcp->cpumask.
+ *
+ * Hence cpumask = (rcp->cpumask & cpu_online_map) to prevent
+ * sending smp_reschedule() to an offlined CPU.
*/
- cpumask = rcp->cpumask;
+ cpus_and(cpumask, rcp->cpumask, cpu_online_map);
cpu_clear(rdp->cpu, cpumask);
for_each_cpu_mask(cpu, cpumask)
smp_send_reschedule(cpu);
diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c
index e1cdf19..41d275a 100644
--- a/kernel/rcupreempt.c
+++ b/kernel/rcupreempt.c
@@ -217,8 +217,6 @@
}
EXPORT_SYMBOL_GPL(rcu_batches_completed);
-EXPORT_SYMBOL_GPL(rcu_batches_completed_bh);
-
void __rcu_read_lock(void)
{
int idx;
@@ -927,7 +925,15 @@
spin_unlock_irqrestore(&rdp->lock, flags);
}
-void __devinit rcu_online_cpu(int cpu)
+#else /* #ifdef CONFIG_HOTPLUG_CPU */
+
+void rcu_offline_cpu(int cpu)
+{
+}
+
+#endif /* #else #ifdef CONFIG_HOTPLUG_CPU */
+
+void __cpuinit rcu_online_cpu(int cpu)
{
unsigned long flags;
@@ -936,18 +942,6 @@
spin_unlock_irqrestore(&rcu_ctrlblk.fliplock, flags);
}
-#else /* #ifdef CONFIG_HOTPLUG_CPU */
-
-void rcu_offline_cpu(int cpu)
-{
-}
-
-void __devinit rcu_online_cpu(int cpu)
-{
-}
-
-#endif /* #else #ifdef CONFIG_HOTPLUG_CPU */
-
static void rcu_process_callbacks(struct softirq_action *unused)
{
unsigned long flags;
diff --git a/kernel/sched.c b/kernel/sched.c
index bfb8ad8..4e2f6033 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -312,12 +312,15 @@
#endif
/*
- * A weight of 0, 1 or ULONG_MAX can cause arithmetics problems.
+ * A weight of 0 or 1 can cause arithmetics problems.
+ * A weight of a cfs_rq is the sum of weights of which entities
+ * are queued on this cfs_rq, so a weight of a entity should not be
+ * too large, so as the shares value of a task group.
* (The default weight is 1024 - so there's no practical
* limitation from this.)
*/
#define MIN_SHARES 2
-#define MAX_SHARES (ULONG_MAX - 1)
+#define MAX_SHARES (1UL << 18)
static int init_task_group_load = INIT_TASK_GROUP_LOAD;
#endif
@@ -1124,6 +1127,7 @@
return HRTIMER_NORESTART;
}
+#ifdef CONFIG_SMP
static void hotplug_hrtick_disable(int cpu)
{
struct rq *rq = cpu_rq(cpu);
@@ -1179,6 +1183,7 @@
{
hotcpu_notifier(hotplug_hrtick, 0);
}
+#endif /* CONFIG_SMP */
static void init_rq_hrtick(struct rq *rq)
{
@@ -1337,8 +1342,13 @@
{
u64 tmp;
- if (!lw->inv_weight)
- lw->inv_weight = 1 + (WMULT_CONST-lw->weight/2)/(lw->weight+1);
+ if (!lw->inv_weight) {
+ if (BITS_PER_LONG > 32 && unlikely(lw->weight >= WMULT_CONST))
+ lw->inv_weight = 1;
+ else
+ lw->inv_weight = 1 + (WMULT_CONST-lw->weight/2)
+ / (lw->weight+1);
+ }
tmp = (u64)delta_exec * weight;
/*
@@ -4159,12 +4169,10 @@
clear_tsk_need_resched(prev);
if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) {
- if (unlikely((prev->state & TASK_INTERRUPTIBLE) &&
- signal_pending(prev))) {
+ if (unlikely(signal_pending_state(prev->state, prev)))
prev->state = TASK_RUNNING;
- } else {
+ else
deactivate_task(rq, prev, 1);
- }
switch_count = &prev->nvcsw;
}
@@ -4390,22 +4398,20 @@
signal_pending(current)) ||
(state == TASK_KILLABLE &&
fatal_signal_pending(current))) {
- __remove_wait_queue(&x->wait, &wait);
- return -ERESTARTSYS;
+ timeout = -ERESTARTSYS;
+ break;
}
__set_current_state(state);
spin_unlock_irq(&x->wait.lock);
timeout = schedule_timeout(timeout);
spin_lock_irq(&x->wait.lock);
- if (!timeout) {
- __remove_wait_queue(&x->wait, &wait);
- return timeout;
- }
- } while (!x->done);
+ } while (!x->done && timeout);
__remove_wait_queue(&x->wait, &wait);
+ if (!x->done)
+ return timeout;
}
x->done--;
- return timeout;
+ return timeout ?: 1;
}
static long __sched
@@ -5616,10 +5622,10 @@
double_rq_lock(rq_src, rq_dest);
/* Already moved. */
if (task_cpu(p) != src_cpu)
- goto out;
+ goto done;
/* Affinity changed (again). */
if (!cpu_isset(dest_cpu, p->cpus_allowed))
- goto out;
+ goto fail;
on_rq = p->se.on_rq;
if (on_rq)
@@ -5630,8 +5636,9 @@
activate_task(rq_dest, p, 0);
check_preempt_curr(rq_dest, p);
}
+done:
ret = 1;
-out:
+fail:
double_rq_unlock(rq_src, rq_dest);
return ret;
}
@@ -5881,6 +5888,7 @@
next = pick_next_task(rq, rq->curr);
if (!next)
break;
+ next->sched_class->put_prev_task(rq, next);
migrate_dead(dead_cpu, next);
}
@@ -6871,7 +6879,12 @@
static int __init setup_relax_domain_level(char *str)
{
- default_relax_domain_level = simple_strtoul(str, NULL, 0);
+ unsigned long val;
+
+ val = simple_strtoul(str, NULL, 0);
+ if (val < SD_LV_MAX)
+ default_relax_domain_level = val;
+
return 1;
}
__setup("relax_domain_level=", setup_relax_domain_level);
@@ -7230,6 +7243,18 @@
}
/*
+ * Free current domain masks.
+ * Called after all cpus are attached to NULL domain.
+ */
+static void free_sched_domains(void)
+{
+ ndoms_cur = 0;
+ if (doms_cur != &fallback_doms)
+ kfree(doms_cur);
+ doms_cur = &fallback_doms;
+}
+
+/*
* Set up scheduler domains and groups. Callers must hold the hotplug lock.
* For now this just excludes isolated cpus, but could be used to
* exclude other special cases in the future.
@@ -7376,6 +7401,7 @@
get_online_cpus();
mutex_lock(&sched_domains_mutex);
detach_destroy_domains(&cpu_online_map);
+ free_sched_domains();
err = arch_init_sched_domains(&cpu_online_map);
mutex_unlock(&sched_domains_mutex);
put_online_cpus();
@@ -7461,6 +7487,7 @@
case CPU_DOWN_PREPARE:
case CPU_DOWN_PREPARE_FROZEN:
detach_destroy_domains(&cpu_online_map);
+ free_sched_domains();
return NOTIFY_OK;
case CPU_UP_CANCELED:
@@ -7479,8 +7506,16 @@
return NOTIFY_DONE;
}
+#ifndef CONFIG_CPUSETS
+ /*
+ * Create default domain partitioning if cpusets are disabled.
+ * Otherwise we let cpusets rebuild the domains based on the
+ * current setup.
+ */
+
/* The hotplug lock is already held by cpu_up/cpu_down */
arch_init_sched_domains(&cpu_online_map);
+#endif
return NOTIFY_OK;
}
@@ -7620,7 +7655,6 @@
else
rt_se->rt_rq = parent->my_q;
- rt_se->rt_rq = &rq->rt;
rt_se->my_q = rt_rq;
rt_se->parent = parent;
INIT_LIST_HEAD(&rt_se->run_list);
@@ -8342,7 +8376,7 @@
#ifdef CONFIG_CGROUP_SCHED
static int __rt_schedulable(struct task_group *tg, u64 period, u64 runtime)
{
- struct task_group *tgi, *parent = tg->parent;
+ struct task_group *tgi, *parent = tg ? tg->parent : NULL;
unsigned long total = 0;
if (!parent) {
@@ -8469,6 +8503,9 @@
rt_period = (u64)rt_period_us * NSEC_PER_USEC;
rt_runtime = tg->rt_bandwidth.rt_runtime;
+ if (rt_period == 0)
+ return -EINVAL;
+
return tg_set_bandwidth(tg, rt_period, rt_runtime);
}
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 3432d57..0f3c191 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -250,7 +250,8 @@
if (rt_rq->rt_time || rt_rq->rt_nr_running)
idle = 0;
spin_unlock(&rt_rq->rt_runtime_lock);
- }
+ } else if (rt_rq->rt_nr_running)
+ idle = 0;
if (enqueue)
sched_rt_rq_enqueue(rt_rq);
@@ -449,13 +450,19 @@
#endif
}
-static void enqueue_rt_entity(struct sched_rt_entity *rt_se)
+static void __enqueue_rt_entity(struct sched_rt_entity *rt_se)
{
struct rt_rq *rt_rq = rt_rq_of_se(rt_se);
struct rt_prio_array *array = &rt_rq->active;
struct rt_rq *group_rq = group_rt_rq(rt_se);
- if (group_rq && rt_rq_throttled(group_rq))
+ /*
+ * Don't enqueue the group if its throttled, or when empty.
+ * The latter is a consequence of the former when a child group
+ * get throttled and the current group doesn't have any other
+ * active members.
+ */
+ if (group_rq && (rt_rq_throttled(group_rq) || !group_rq->rt_nr_running))
return;
list_add_tail(&rt_se->run_list, array->queue + rt_se_prio(rt_se));
@@ -464,7 +471,7 @@
inc_rt_tasks(rt_se, rt_rq);
}
-static void dequeue_rt_entity(struct sched_rt_entity *rt_se)
+static void __dequeue_rt_entity(struct sched_rt_entity *rt_se)
{
struct rt_rq *rt_rq = rt_rq_of_se(rt_se);
struct rt_prio_array *array = &rt_rq->active;
@@ -480,11 +487,10 @@
* Because the prio of an upper entry depends on the lower
* entries, we must remove entries top - down.
*/
-static void dequeue_rt_stack(struct task_struct *p)
+static void dequeue_rt_stack(struct sched_rt_entity *rt_se)
{
- struct sched_rt_entity *rt_se, *back = NULL;
+ struct sched_rt_entity *back = NULL;
- rt_se = &p->rt;
for_each_sched_rt_entity(rt_se) {
rt_se->back = back;
back = rt_se;
@@ -492,7 +498,26 @@
for (rt_se = back; rt_se; rt_se = rt_se->back) {
if (on_rt_rq(rt_se))
- dequeue_rt_entity(rt_se);
+ __dequeue_rt_entity(rt_se);
+ }
+}
+
+static void enqueue_rt_entity(struct sched_rt_entity *rt_se)
+{
+ dequeue_rt_stack(rt_se);
+ for_each_sched_rt_entity(rt_se)
+ __enqueue_rt_entity(rt_se);
+}
+
+static void dequeue_rt_entity(struct sched_rt_entity *rt_se)
+{
+ dequeue_rt_stack(rt_se);
+
+ for_each_sched_rt_entity(rt_se) {
+ struct rt_rq *rt_rq = group_rt_rq(rt_se);
+
+ if (rt_rq && rt_rq->rt_nr_running)
+ __enqueue_rt_entity(rt_se);
}
}
@@ -506,32 +531,15 @@
if (wakeup)
rt_se->timeout = 0;
- dequeue_rt_stack(p);
-
- /*
- * enqueue everybody, bottom - up.
- */
- for_each_sched_rt_entity(rt_se)
- enqueue_rt_entity(rt_se);
+ enqueue_rt_entity(rt_se);
}
static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep)
{
struct sched_rt_entity *rt_se = &p->rt;
- struct rt_rq *rt_rq;
update_curr_rt(rq);
-
- dequeue_rt_stack(p);
-
- /*
- * re-enqueue all non-empty rt_rq entities.
- */
- for_each_sched_rt_entity(rt_se) {
- rt_rq = group_rt_rq(rt_se);
- if (rt_rq && rt_rq->rt_nr_running)
- enqueue_rt_entity(rt_se);
- }
+ dequeue_rt_entity(rt_se);
}
/*
@@ -542,8 +550,10 @@
void requeue_rt_entity(struct rt_rq *rt_rq, struct sched_rt_entity *rt_se)
{
struct rt_prio_array *array = &rt_rq->active;
+ struct list_head *queue = array->queue + rt_se_prio(rt_se);
- list_move_tail(&rt_se->run_list, array->queue + rt_se_prio(rt_se));
+ if (on_rt_rq(rt_se))
+ list_move_tail(&rt_se->run_list, queue);
}
static void requeue_task_rt(struct rq *rq, struct task_struct *p)
diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h
index a38878e..80179ef 100644
--- a/kernel/sched_stats.h
+++ b/kernel/sched_stats.h
@@ -198,6 +198,9 @@
/*
* Called when a process ceases being the active-running process, either
* voluntarily or involuntarily. Now we can calculate how long we ran.
+ * Also, if the process is still in the TASK_RUNNING state, call
+ * sched_info_queued() to mark that it has now again started waiting on
+ * the runqueue.
*/
static inline void sched_info_depart(struct task_struct *t)
{
@@ -206,6 +209,9 @@
t->sched_info.cpu_time += delta;
rq_sched_info_depart(task_rq(t), delta);
+
+ if (t->state == TASK_RUNNING)
+ sched_info_queued(t);
}
/*
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index 01b6522..a272d78 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -49,12 +49,17 @@
return cpu_clock(this_cpu) >> 30LL; /* 2^30 ~= 10^9 */
}
-void touch_softlockup_watchdog(void)
+static void __touch_softlockup_watchdog(void)
{
int this_cpu = raw_smp_processor_id();
__raw_get_cpu_var(touch_timestamp) = get_timestamp(this_cpu);
}
+
+void touch_softlockup_watchdog(void)
+{
+ __raw_get_cpu_var(touch_timestamp) = 0;
+}
EXPORT_SYMBOL(touch_softlockup_watchdog);
void touch_all_softlockup_watchdogs(void)
@@ -80,7 +85,7 @@
unsigned long now;
if (touch_timestamp == 0) {
- touch_softlockup_watchdog();
+ __touch_softlockup_watchdog();
return;
}
@@ -95,7 +100,7 @@
/* do not print during early bootup: */
if (unlikely(system_state != SYSTEM_RUNNING)) {
- touch_softlockup_watchdog();
+ __touch_softlockup_watchdog();
return;
}
@@ -115,6 +120,7 @@
printk(KERN_ERR "BUG: soft lockup - CPU#%d stuck for %lus! [%s:%d]\n",
this_cpu, now - touch_timestamp,
current->comm, task_pid_nr(current));
+ print_modules();
if (regs)
show_regs(regs);
else
@@ -214,7 +220,7 @@
sched_setscheduler(current, SCHED_FIFO, ¶m);
/* initialize timestamp */
- touch_softlockup_watchdog();
+ __touch_softlockup_watchdog();
set_current_state(TASK_INTERRUPTIBLE);
/*
@@ -223,7 +229,7 @@
* debug-printout triggers in softlockup_tick().
*/
while (!kthread_should_stop()) {
- touch_softlockup_watchdog();
+ __touch_softlockup_watchdog();
schedule();
if (kthread_should_stop())
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 29fc39f..ce77995 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -13,7 +13,7 @@
* Kai Petzke <wpp@marie.physik.tu-berlin.de>
* Theodore Ts'o <tytso@mit.edu>
*
- * Made to use alloc_percpu by Christoph Lameter <clameter@sgi.com>.
+ * Made to use alloc_percpu by Christoph Lameter.
*/
#include <linux/module.h>
diff --git a/lib/bitrev.c b/lib/bitrev.c
index 989aff7..3956203 100644
--- a/lib/bitrev.c
+++ b/lib/bitrev.c
@@ -42,10 +42,11 @@
};
EXPORT_SYMBOL_GPL(byte_rev_table);
-static __always_inline u16 bitrev16(u16 x)
+u16 bitrev16(u16 x)
{
return (bitrev8(x & 0xff) << 8) | bitrev8(x >> 8);
}
+EXPORT_SYMBOL(bitrev16);
/**
* bitrev32 - reverse the order of bits in a u32 value
diff --git a/lib/bug.c b/lib/bug.c
index 530f38f..bfeafd6 100644
--- a/lib/bug.c
+++ b/lib/bug.c
@@ -37,6 +37,7 @@
*/
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/kernel.h>
#include <linux/bug.h>
#include <linux/sched.h>
@@ -149,6 +150,7 @@
(void *)bugaddr);
show_regs(regs);
+ add_taint(TAINT_WARN);
return BUG_TRAP_TYPE_WARN;
}
diff --git a/lib/debugobjects.c b/lib/debugobjects.c
index a76a5e1..85b18d7 100644
--- a/lib/debugobjects.c
+++ b/lib/debugobjects.c
@@ -68,6 +68,7 @@
{
gfp_t gfp = GFP_ATOMIC | __GFP_NORETRY | __GFP_NOWARN;
struct debug_obj *new;
+ unsigned long flags;
if (likely(obj_pool_free >= ODEBUG_POOL_MIN_LEVEL))
return obj_pool_free;
@@ -81,10 +82,10 @@
if (!new)
return obj_pool_free;
- spin_lock(&pool_lock);
+ spin_lock_irqsave(&pool_lock, flags);
hlist_add_head(&new->node, &obj_pool);
obj_pool_free++;
- spin_unlock(&pool_lock);
+ spin_unlock_irqrestore(&pool_lock, flags);
}
return obj_pool_free;
}
@@ -110,16 +111,13 @@
}
/*
- * Allocate a new object. If the pool is empty and no refill possible,
- * switch off the debugger.
+ * Allocate a new object. If the pool is empty, switch off the debugger.
*/
static struct debug_obj *
alloc_object(void *addr, struct debug_bucket *b, struct debug_obj_descr *descr)
{
struct debug_obj *obj = NULL;
- int retry = 0;
-repeat:
spin_lock(&pool_lock);
if (obj_pool.first) {
obj = hlist_entry(obj_pool.first, typeof(*obj), node);
@@ -141,9 +139,6 @@
}
spin_unlock(&pool_lock);
- if (fill_pool() && !obj && !retry++)
- goto repeat;
-
return obj;
}
@@ -261,6 +256,8 @@
struct debug_obj *obj;
unsigned long flags;
+ fill_pool();
+
db = get_bucket((unsigned long) addr);
spin_lock_irqsave(&db->lock, flags);
diff --git a/lib/div64.c b/lib/div64.c
index bb5bd0c..a111eb8 100644
--- a/lib/div64.c
+++ b/lib/div64.c
@@ -98,3 +98,13 @@
#endif
#endif /* BITS_PER_LONG == 32 */
+
+/*
+ * Iterative div/mod for use when dividend is not expected to be much
+ * bigger than divisor.
+ */
+u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder)
+{
+ return __iter_div_u64_rem(dividend, divisor, remainder);
+}
+EXPORT_SYMBOL(iter_div_u64_rem);
diff --git a/lib/radix-tree.c b/lib/radix-tree.c
index bd52171..56ec21a 100644
--- a/lib/radix-tree.c
+++ b/lib/radix-tree.c
@@ -1,7 +1,7 @@
/*
* Copyright (C) 2001 Momchil Velikov
* Portions Copyright (C) 2001 Christoph Hellwig
- * Copyright (C) 2005 SGI, Christoph Lameter <clameter@sgi.com>
+ * Copyright (C) 2005 SGI, Christoph Lameter
* Copyright (C) 2006 Nick Piggin
*
* This program is free software; you can redistribute it and/or
@@ -88,6 +88,57 @@
return root->gfp_mask & __GFP_BITS_MASK;
}
+static inline void tag_set(struct radix_tree_node *node, unsigned int tag,
+ int offset)
+{
+ __set_bit(offset, node->tags[tag]);
+}
+
+static inline void tag_clear(struct radix_tree_node *node, unsigned int tag,
+ int offset)
+{
+ __clear_bit(offset, node->tags[tag]);
+}
+
+static inline int tag_get(struct radix_tree_node *node, unsigned int tag,
+ int offset)
+{
+ return test_bit(offset, node->tags[tag]);
+}
+
+static inline void root_tag_set(struct radix_tree_root *root, unsigned int tag)
+{
+ root->gfp_mask |= (__force gfp_t)(1 << (tag + __GFP_BITS_SHIFT));
+}
+
+static inline void root_tag_clear(struct radix_tree_root *root, unsigned int tag)
+{
+ root->gfp_mask &= (__force gfp_t)~(1 << (tag + __GFP_BITS_SHIFT));
+}
+
+static inline void root_tag_clear_all(struct radix_tree_root *root)
+{
+ root->gfp_mask &= __GFP_BITS_MASK;
+}
+
+static inline int root_tag_get(struct radix_tree_root *root, unsigned int tag)
+{
+ return (__force unsigned)root->gfp_mask & (1 << (tag + __GFP_BITS_SHIFT));
+}
+
+/*
+ * Returns 1 if any slot in the node has this tag set.
+ * Otherwise returns 0.
+ */
+static inline int any_tag_set(struct radix_tree_node *node, unsigned int tag)
+{
+ int idx;
+ for (idx = 0; idx < RADIX_TREE_TAG_LONGS; idx++) {
+ if (node->tags[tag][idx])
+ return 1;
+ }
+ return 0;
+}
/*
* This assumes that the caller has performed appropriate preallocation, and
* that the caller has pinned this thread of control to the current CPU.
@@ -124,6 +175,17 @@
{
struct radix_tree_node *node =
container_of(head, struct radix_tree_node, rcu_head);
+
+ /*
+ * must only free zeroed nodes into the slab. radix_tree_shrink
+ * can leave us with a non-NULL entry in the first slot, so clear
+ * that here to make sure.
+ */
+ tag_clear(node, 0, 0);
+ tag_clear(node, 1, 0);
+ node->slots[0] = NULL;
+ node->count = 0;
+
kmem_cache_free(radix_tree_node_cachep, node);
}
@@ -165,59 +227,6 @@
}
EXPORT_SYMBOL(radix_tree_preload);
-static inline void tag_set(struct radix_tree_node *node, unsigned int tag,
- int offset)
-{
- __set_bit(offset, node->tags[tag]);
-}
-
-static inline void tag_clear(struct radix_tree_node *node, unsigned int tag,
- int offset)
-{
- __clear_bit(offset, node->tags[tag]);
-}
-
-static inline int tag_get(struct radix_tree_node *node, unsigned int tag,
- int offset)
-{
- return test_bit(offset, node->tags[tag]);
-}
-
-static inline void root_tag_set(struct radix_tree_root *root, unsigned int tag)
-{
- root->gfp_mask |= (__force gfp_t)(1 << (tag + __GFP_BITS_SHIFT));
-}
-
-
-static inline void root_tag_clear(struct radix_tree_root *root, unsigned int tag)
-{
- root->gfp_mask &= (__force gfp_t)~(1 << (tag + __GFP_BITS_SHIFT));
-}
-
-static inline void root_tag_clear_all(struct radix_tree_root *root)
-{
- root->gfp_mask &= __GFP_BITS_MASK;
-}
-
-static inline int root_tag_get(struct radix_tree_root *root, unsigned int tag)
-{
- return (__force unsigned)root->gfp_mask & (1 << (tag + __GFP_BITS_SHIFT));
-}
-
-/*
- * Returns 1 if any slot in the node has this tag set.
- * Otherwise returns 0.
- */
-static inline int any_tag_set(struct radix_tree_node *node, unsigned int tag)
-{
- int idx;
- for (idx = 0; idx < RADIX_TREE_TAG_LONGS; idx++) {
- if (node->tags[tag][idx])
- return 1;
- }
- return 0;
-}
-
/*
* Return the maximum key which can be store into a
* radix tree with height HEIGHT.
@@ -930,11 +939,6 @@
newptr = radix_tree_ptr_to_indirect(newptr);
root->rnode = newptr;
root->height--;
- /* must only free zeroed nodes into the slab */
- tag_clear(to_free, 0, 0);
- tag_clear(to_free, 1, 0);
- to_free->slots[0] = NULL;
- to_free->count = 0;
radix_tree_node_free(to_free);
}
}
diff --git a/lib/ts_bm.c b/lib/ts_bm.c
index d90822c..4a7fce7 100644
--- a/lib/ts_bm.c
+++ b/lib/ts_bm.c
@@ -63,7 +63,7 @@
struct ts_bm *bm = ts_config_priv(conf);
unsigned int i, text_len, consumed = state->offset;
const u8 *text;
- int shift = bm->patlen, bs;
+ int shift = bm->patlen - 1, bs;
for (;;) {
text_len = conf->get_next_block(consumed, &text, conf, state);
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 6021757..1dc2d1d 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -22,6 +22,8 @@
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/kernel.h>
+#include <linux/kallsyms.h>
+#include <linux/uaccess.h>
#include <asm/page.h> /* for PAGE_SIZE */
#include <asm/div64.h>
@@ -482,6 +484,89 @@
return buf;
}
+static char *string(char *buf, char *end, char *s, int field_width, int precision, int flags)
+{
+ int len, i;
+
+ if ((unsigned long)s < PAGE_SIZE)
+ s = "<NULL>";
+
+ len = strnlen(s, precision);
+
+ if (!(flags & LEFT)) {
+ while (len < field_width--) {
+ if (buf < end)
+ *buf = ' ';
+ ++buf;
+ }
+ }
+ for (i = 0; i < len; ++i) {
+ if (buf < end)
+ *buf = *s;
+ ++buf; ++s;
+ }
+ while (len < field_width--) {
+ if (buf < end)
+ *buf = ' ';
+ ++buf;
+ }
+ return buf;
+}
+
+static inline void *dereference_function_descriptor(void *ptr)
+{
+#if defined(CONFIG_IA64) || defined(CONFIG_PPC64)
+ void *p;
+ if (!probe_kernel_address(ptr, p))
+ ptr = p;
+#endif
+ return ptr;
+}
+
+static char *symbol_string(char *buf, char *end, void *ptr, int field_width, int precision, int flags)
+{
+ unsigned long value = (unsigned long) ptr;
+#ifdef CONFIG_KALLSYMS
+ char sym[KSYM_SYMBOL_LEN];
+ sprint_symbol(sym, value);
+ return string(buf, end, sym, field_width, precision, flags);
+#else
+ field_width = 2*sizeof(void *);
+ flags |= SPECIAL | SMALL | ZEROPAD;
+ return number(buf, end, value, 16, field_width, precision, flags);
+#endif
+}
+
+/*
+ * Show a '%p' thing. A kernel extension is that the '%p' is followed
+ * by an extra set of alphanumeric characters that are extended format
+ * specifiers.
+ *
+ * Right now we just handle 'F' (for symbolic Function descriptor pointers)
+ * and 'S' (for Symbolic direct pointers), but this can easily be
+ * extended in the future (network address types etc).
+ *
+ * The difference between 'S' and 'F' is that on ia64 and ppc64 function
+ * pointers are really function descriptors, which contain a pointer the
+ * real address.
+ */
+static char *pointer(const char *fmt, char *buf, char *end, void *ptr, int field_width, int precision, int flags)
+{
+ switch (*fmt) {
+ case 'F':
+ ptr = dereference_function_descriptor(ptr);
+ /* Fallthrough */
+ case 'S':
+ return symbol_string(buf, end, ptr, field_width, precision, flags);
+ }
+ flags |= SMALL;
+ if (field_width == -1) {
+ field_width = 2*sizeof(void *);
+ flags |= ZEROPAD;
+ }
+ return number(buf, end, (unsigned long) ptr, 16, field_width, precision, flags);
+}
+
/**
* vsnprintf - Format a string and place it in a buffer
* @buf: The buffer to place the result into
@@ -502,11 +587,9 @@
*/
int vsnprintf(char *buf, size_t size, const char *fmt, va_list args)
{
- int len;
unsigned long long num;
- int i, base;
+ int base;
char *str, *end, c;
- const char *s;
int flags; /* flags to number() */
@@ -622,43 +705,18 @@
continue;
case 's':
- s = va_arg(args, char *);
- if ((unsigned long)s < PAGE_SIZE)
- s = "<NULL>";
-
- len = strnlen(s, precision);
-
- if (!(flags & LEFT)) {
- while (len < field_width--) {
- if (str < end)
- *str = ' ';
- ++str;
- }
- }
- for (i = 0; i < len; ++i) {
- if (str < end)
- *str = *s;
- ++str; ++s;
- }
- while (len < field_width--) {
- if (str < end)
- *str = ' ';
- ++str;
- }
+ str = string(str, end, va_arg(args, char *), field_width, precision, flags);
continue;
case 'p':
- flags |= SMALL;
- if (field_width == -1) {
- field_width = 2*sizeof(void *);
- flags |= ZEROPAD;
- }
- str = number(str, end,
- (unsigned long) va_arg(args, void *),
- 16, field_width, precision, flags);
+ str = pointer(fmt+1, str, end,
+ va_arg(args, void *),
+ field_width, precision, flags);
+ /* Skip all alphanumeric pointer suffixes */
+ while (isalnum(fmt[1]))
+ fmt++;
continue;
-
case 'n':
/* FIXME:
* What does C99 say about the overflow case here? */
diff --git a/mm/allocpercpu.c b/mm/allocpercpu.c
index f4026ba..05f2b40 100644
--- a/mm/allocpercpu.c
+++ b/mm/allocpercpu.c
@@ -1,7 +1,7 @@
/*
* linux/mm/allocpercpu.c
*
- * Separated from slab.c August 11, 2006 Christoph Lameter <clameter@sgi.com>
+ * Separated from slab.c August 11, 2006 Christoph Lameter
*/
#include <linux/mm.h>
#include <linux/module.h>
diff --git a/mm/bootmem.c b/mm/bootmem.c
index e8fb927..8d9f60e 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -442,15 +442,17 @@
return init_bootmem_core(pgdat, freepfn, startpfn, endpfn);
}
-void __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
+int __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
unsigned long size, int flags)
{
int ret;
ret = can_reserve_bootmem_core(pgdat->bdata, physaddr, size, flags);
if (ret < 0)
- return;
+ return -ENOMEM;
reserve_bootmem_core(pgdat->bdata, physaddr, size, flags);
+
+ return 0;
}
void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index bbf953e..ab17127 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -785,7 +785,7 @@
continue;
spin_lock(&dst->page_table_lock);
- spin_lock(&src->page_table_lock);
+ spin_lock_nested(&src->page_table_lock, SINGLE_DEPTH_NESTING);
if (!huge_pte_none(huge_ptep_get(src_pte))) {
if (cow)
huge_ptep_set_wrprotect(src, addr, src_pte);
diff --git a/mm/memory.c b/mm/memory.c
index 19e0ae9..2302d22 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -999,17 +999,15 @@
goto no_page_table;
ptep = pte_offset_map_lock(mm, pmd, address, &ptl);
- if (!ptep)
- goto out;
pte = *ptep;
if (!pte_present(pte))
- goto unlock;
+ goto no_page;
if ((flags & FOLL_WRITE) && !pte_write(pte))
goto unlock;
page = vm_normal_page(vma, address, pte);
if (unlikely(!page))
- goto unlock;
+ goto bad_page;
if (flags & FOLL_GET)
get_page(page);
@@ -1024,6 +1022,15 @@
out:
return page;
+bad_page:
+ pte_unmap_unlock(ptep, ptl);
+ return ERR_PTR(-EFAULT);
+
+no_page:
+ pte_unmap_unlock(ptep, ptl);
+ if (!pte_none(pte))
+ return page;
+ /* Fall through to ZERO_PAGE handling */
no_page_table:
/*
* When core dumping an enormous anonymous area that nobody
@@ -1038,6 +1045,26 @@
return page;
}
+/* Can we do the FOLL_ANON optimization? */
+static inline int use_zero_page(struct vm_area_struct *vma)
+{
+ /*
+ * We don't want to optimize FOLL_ANON for make_pages_present()
+ * when it tries to page in a VM_LOCKED region. As to VM_SHARED,
+ * we want to get the page from the page tables to make sure
+ * that we serialize and update with any other user of that
+ * mapping.
+ */
+ if (vma->vm_flags & (VM_LOCKED | VM_SHARED))
+ return 0;
+ /*
+ * And if we have a fault or a nopfn routine, it's not an
+ * anonymous region.
+ */
+ return !vma->vm_ops ||
+ (!vma->vm_ops->fault && !vma->vm_ops->nopfn);
+}
+
int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
unsigned long start, int len, int write, int force,
struct page **pages, struct vm_area_struct **vmas)
@@ -1112,8 +1139,7 @@
foll_flags = FOLL_TOUCH;
if (pages)
foll_flags |= FOLL_GET;
- if (!write && !(vma->vm_flags & VM_LOCKED) &&
- (!vma->vm_ops || !vma->vm_ops->fault))
+ if (!write && use_zero_page(vma))
foll_flags |= FOLL_ANON;
do {
@@ -1125,7 +1151,7 @@
* be processed until returning to user space.
*/
if (unlikely(test_tsk_thread_flag(tsk, TIF_MEMDIE)))
- return -ENOMEM;
+ return i ? i : -ENOMEM;
if (write)
foll_flags |= FOLL_WRITE;
@@ -1159,6 +1185,8 @@
cond_resched();
}
+ if (IS_ERR(page))
+ return i ? i : PTR_ERR(page);
if (pages) {
pages[i] = page;
@@ -1669,8 +1697,19 @@
struct page *dirty_page = NULL;
old_page = vm_normal_page(vma, address, orig_pte);
- if (!old_page)
+ if (!old_page) {
+ /*
+ * VM_MIXEDMAP !pfn_valid() case
+ *
+ * We should not cow pages in a shared writeable mapping.
+ * Just mark the pages writable as we can't do any dirty
+ * accounting on raw pfn maps.
+ */
+ if ((vma->vm_flags & (VM_WRITE|VM_SHARED)) ==
+ (VM_WRITE|VM_SHARED))
+ goto reuse;
goto gotten;
+ }
/*
* Take out anonymous pages first, anonymous shared vmas are
@@ -1723,6 +1762,7 @@
}
if (reuse) {
+reuse:
flush_cache_page(vma, address, pte_pfn(orig_pte));
entry = pte_mkyoung(orig_pte);
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
@@ -1757,7 +1797,6 @@
page_table = pte_offset_map_lock(mm, pmd, address, &ptl);
if (likely(pte_same(*page_table, orig_pte))) {
if (old_page) {
- page_remove_rmap(old_page, vma);
if (!PageAnon(old_page)) {
dec_mm_counter(mm, file_rss);
inc_mm_counter(mm, anon_rss);
@@ -1779,6 +1818,32 @@
lru_cache_add_active(new_page);
page_add_new_anon_rmap(new_page, vma, address);
+ if (old_page) {
+ /*
+ * Only after switching the pte to the new page may
+ * we remove the mapcount here. Otherwise another
+ * process may come and find the rmap count decremented
+ * before the pte is switched to the new page, and
+ * "reuse" the old page writing into it while our pte
+ * here still points into it and can be read by other
+ * threads.
+ *
+ * The critical issue is to order this
+ * page_remove_rmap with the ptp_clear_flush above.
+ * Those stores are ordered by (if nothing else,)
+ * the barrier present in the atomic_add_negative
+ * in page_remove_rmap.
+ *
+ * Then the TLB flush in ptep_clear_flush ensures that
+ * no process can access the old page before the
+ * decremented mapcount is visible. And the old page
+ * cannot be reused until after the decremented
+ * mapcount is visible. So transitively, TLBs to
+ * old page will be flushed before it can be reused.
+ */
+ page_remove_rmap(old_page, vma);
+ }
+
/* Free the old page.. */
new_page = old_page;
ret |= VM_FAULT_WRITE;
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index a37a503..c94e58b 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -729,7 +729,11 @@
} else {
*policy = pol == &default_policy ? MPOL_DEFAULT :
pol->mode;
- *policy |= pol->flags;
+ /*
+ * Internal mempolicy flags must be masked off before exposing
+ * the policy to userspace.
+ */
+ *policy |= (pol->flags & MPOL_MODE_FLAGS);
}
if (vma) {
diff --git a/mm/migrate.c b/mm/migrate.c
index 449d77d..55bd355 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -9,7 +9,7 @@
* IWAMOTO Toshihiro <iwamoto@valinux.co.jp>
* Hirokazu Takahashi <taka@valinux.co.jp>
* Dave Hansen <haveblue@us.ibm.com>
- * Christoph Lameter <clameter@sgi.com>
+ * Christoph Lameter
*/
#include <linux/migrate.h>
@@ -865,6 +865,11 @@
goto set_status;
page = follow_page(vma, pp->addr, FOLL_GET);
+
+ err = PTR_ERR(page);
+ if (IS_ERR(page))
+ goto set_status;
+
err = -ENOENT;
if (!page)
goto set_status;
@@ -928,6 +933,11 @@
goto set_status;
page = follow_page(vma, pm->addr, 0);
+
+ err = PTR_ERR(page);
+ if (IS_ERR(page))
+ goto set_status;
+
err = -ENOENT;
/* Use PageReserved to check for zero page */
if (!page || PageReserved(page))
diff --git a/mm/mmap.c b/mm/mmap.c
index 669499e..3354fdd 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -245,10 +245,16 @@
unsigned long rlim, retval;
unsigned long newbrk, oldbrk;
struct mm_struct *mm = current->mm;
+ unsigned long min_brk;
down_write(&mm->mmap_sem);
- if (brk < mm->start_brk)
+#ifdef CONFIG_COMPAT_BRK
+ min_brk = mm->end_code;
+#else
+ min_brk = mm->start_brk;
+#endif
+ if (brk < min_brk)
goto out;
/*
diff --git a/mm/nommu.c b/mm/nommu.c
index dca93fc..4462b6a 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -109,16 +109,23 @@
* If the object we have should not have ksize performed on it,
* return size of 0
*/
- if (!objp || (unsigned long)objp >= memory_end || !((page = virt_to_page(objp))))
+ if (!objp || !virt_addr_valid(objp))
return 0;
+ page = virt_to_head_page(objp);
+
+ /*
+ * If the allocator sets PageSlab, we know the pointer came from
+ * kmalloc().
+ */
if (PageSlab(page))
return ksize(objp);
- BUG_ON(page->index < 0);
- BUG_ON(page->index >= MAX_ORDER);
-
- return (PAGE_SIZE << page->index);
+ /*
+ * The ksize() function is only guaranteed to work for pointers
+ * returned by kmalloc(). So handle arbitrary pointers here.
+ */
+ return PAGE_SIZE << compound_order(page);
}
/*
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 8e83f02..f32fae3 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -237,16 +237,7 @@
printk(KERN_EMERG "Trying to fix it up, but a reboot is needed\n"
KERN_EMERG "Backtrace:\n");
dump_stack();
- page->flags &= ~(1 << PG_lru |
- 1 << PG_private |
- 1 << PG_locked |
- 1 << PG_active |
- 1 << PG_dirty |
- 1 << PG_reclaim |
- 1 << PG_slab |
- 1 << PG_swapcache |
- 1 << PG_writeback |
- 1 << PG_buddy );
+ page->flags &= ~PAGE_FLAGS_CLEAR_WHEN_BAD;
set_page_count(page, 0);
reset_page_mapcount(page);
page->mapping = NULL;
@@ -463,16 +454,7 @@
(page->mapping != NULL) |
(page_get_page_cgroup(page) != NULL) |
(page_count(page) != 0) |
- (page->flags & (
- 1 << PG_lru |
- 1 << PG_private |
- 1 << PG_locked |
- 1 << PG_active |
- 1 << PG_slab |
- 1 << PG_swapcache |
- 1 << PG_writeback |
- 1 << PG_reserved |
- 1 << PG_buddy ))))
+ (page->flags & PAGE_FLAGS_CHECK_AT_FREE)))
bad_page(page);
if (PageDirty(page))
__ClearPageDirty(page);
@@ -616,17 +598,7 @@
(page->mapping != NULL) |
(page_get_page_cgroup(page) != NULL) |
(page_count(page) != 0) |
- (page->flags & (
- 1 << PG_lru |
- 1 << PG_private |
- 1 << PG_locked |
- 1 << PG_active |
- 1 << PG_dirty |
- 1 << PG_slab |
- 1 << PG_swapcache |
- 1 << PG_writeback |
- 1 << PG_reserved |
- 1 << PG_buddy ))))
+ (page->flags & PAGE_FLAGS_CHECK_AT_PREP)))
bad_page(page);
/*
@@ -2356,7 +2328,6 @@
static void build_zonelist_cache(pg_data_t *pgdat)
{
pgdat->node_zonelists[0].zlcache_ptr = NULL;
- pgdat->node_zonelists[1].zlcache_ptr = NULL;
}
#endif /* CONFIG_NUMA */
diff --git a/mm/pagewalk.c b/mm/pagewalk.c
index 0afd238..d5878be 100644
--- a/mm/pagewalk.c
+++ b/mm/pagewalk.c
@@ -3,14 +3,14 @@
#include <linux/sched.h>
static int walk_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
- const struct mm_walk *walk, void *private)
+ struct mm_walk *walk)
{
pte_t *pte;
int err = 0;
pte = pte_offset_map(pmd, addr);
for (;;) {
- err = walk->pte_entry(pte, addr, addr + PAGE_SIZE, private);
+ err = walk->pte_entry(pte, addr, addr + PAGE_SIZE, walk);
if (err)
break;
addr += PAGE_SIZE;
@@ -24,7 +24,7 @@
}
static int walk_pmd_range(pud_t *pud, unsigned long addr, unsigned long end,
- const struct mm_walk *walk, void *private)
+ struct mm_walk *walk)
{
pmd_t *pmd;
unsigned long next;
@@ -35,15 +35,15 @@
next = pmd_addr_end(addr, end);
if (pmd_none_or_clear_bad(pmd)) {
if (walk->pte_hole)
- err = walk->pte_hole(addr, next, private);
+ err = walk->pte_hole(addr, next, walk);
if (err)
break;
continue;
}
if (walk->pmd_entry)
- err = walk->pmd_entry(pmd, addr, next, private);
+ err = walk->pmd_entry(pmd, addr, next, walk);
if (!err && walk->pte_entry)
- err = walk_pte_range(pmd, addr, next, walk, private);
+ err = walk_pte_range(pmd, addr, next, walk);
if (err)
break;
} while (pmd++, addr = next, addr != end);
@@ -52,7 +52,7 @@
}
static int walk_pud_range(pgd_t *pgd, unsigned long addr, unsigned long end,
- const struct mm_walk *walk, void *private)
+ struct mm_walk *walk)
{
pud_t *pud;
unsigned long next;
@@ -63,15 +63,15 @@
next = pud_addr_end(addr, end);
if (pud_none_or_clear_bad(pud)) {
if (walk->pte_hole)
- err = walk->pte_hole(addr, next, private);
+ err = walk->pte_hole(addr, next, walk);
if (err)
break;
continue;
}
if (walk->pud_entry)
- err = walk->pud_entry(pud, addr, next, private);
+ err = walk->pud_entry(pud, addr, next, walk);
if (!err && (walk->pmd_entry || walk->pte_entry))
- err = walk_pmd_range(pud, addr, next, walk, private);
+ err = walk_pmd_range(pud, addr, next, walk);
if (err)
break;
} while (pud++, addr = next, addr != end);
@@ -85,15 +85,15 @@
* @addr: starting address
* @end: ending address
* @walk: set of callbacks to invoke for each level of the tree
- * @private: private data passed to the callback function
*
* Recursively walk the page table for the memory area in a VMA,
* calling supplied callbacks. Callbacks are called in-order (first
* PGD, first PUD, first PMD, first PTE, second PTE... second PMD,
* etc.). If lower-level callbacks are omitted, walking depth is reduced.
*
- * Each callback receives an entry pointer, the start and end of the
- * associated range, and a caller-supplied private data pointer.
+ * Each callback receives an entry pointer and the start and end of the
+ * associated range, and a copy of the original mm_walk for access to
+ * the ->private or ->mm fields.
*
* No locks are taken, but the bottom level iterator will map PTE
* directories from highmem if necessary.
@@ -101,9 +101,8 @@
* If any callback returns a non-zero value, the walk is aborted and
* the return value is propagated back to the caller. Otherwise 0 is returned.
*/
-int walk_page_range(const struct mm_struct *mm,
- unsigned long addr, unsigned long end,
- const struct mm_walk *walk, void *private)
+int walk_page_range(unsigned long addr, unsigned long end,
+ struct mm_walk *walk)
{
pgd_t *pgd;
unsigned long next;
@@ -112,21 +111,24 @@
if (addr >= end)
return err;
- pgd = pgd_offset(mm, addr);
+ if (!walk->mm)
+ return -EINVAL;
+
+ pgd = pgd_offset(walk->mm, addr);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd)) {
if (walk->pte_hole)
- err = walk->pte_hole(addr, next, private);
+ err = walk->pte_hole(addr, next, walk);
if (err)
break;
continue;
}
if (walk->pgd_entry)
- err = walk->pgd_entry(pgd, addr, next, private);
+ err = walk->pgd_entry(pgd, addr, next, walk);
if (!err &&
(walk->pud_entry || walk->pmd_entry || walk->pte_entry))
- err = walk_pud_range(pgd, addr, next, walk, private);
+ err = walk_pud_range(pgd, addr, next, walk);
if (err)
break;
} while (pgd++, addr = next, addr != end);
diff --git a/mm/slab.c b/mm/slab.c
index 06236e4..046607f 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -3263,9 +3263,12 @@
if (cpuset_zone_allowed_hardwall(zone, flags) &&
cache->nodelists[nid] &&
- cache->nodelists[nid]->free_objects)
+ cache->nodelists[nid]->free_objects) {
obj = ____cache_alloc_node(cache,
flags | GFP_THISNODE, nid);
+ if (obj)
+ break;
+ }
}
if (!obj) {
diff --git a/mm/slub.c b/mm/slub.c
index 0987d1c..5f6e2c4 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -5,7 +5,7 @@
* The allocator synchronizes using per slab locks and only
* uses a centralized lock to manage a pool of partial slabs.
*
- * (C) 2007 SGI, Christoph Lameter <clameter@sgi.com>
+ * (C) 2007 SGI, Christoph Lameter
*/
#include <linux/mm.h>
@@ -431,9 +431,8 @@
if (!t->addr)
return;
- printk(KERN_ERR "INFO: %s in ", s);
- __print_symbol("%s", (unsigned long)t->addr);
- printk(" age=%lu cpu=%u pid=%d\n", jiffies - t->when, t->cpu, t->pid);
+ printk(KERN_ERR "INFO: %s in %pS age=%lu cpu=%u pid=%d\n",
+ s, t->addr, jiffies - t->when, t->cpu, t->pid);
}
static void print_tracking(struct kmem_cache *s, void *object)
@@ -1628,9 +1627,11 @@
void **object;
struct kmem_cache_cpu *c;
unsigned long flags;
+ unsigned int objsize;
local_irq_save(flags);
c = get_cpu_slab(s, smp_processor_id());
+ objsize = c->objsize;
if (unlikely(!c->freelist || !node_match(c, node)))
object = __slab_alloc(s, gfpflags, node, addr, c);
@@ -1643,7 +1644,7 @@
local_irq_restore(flags);
if (unlikely((gfpflags & __GFP_ZERO) && object))
- memset(object, 0, c->objsize);
+ memset(object, 0, objsize);
return object;
}
@@ -2995,8 +2996,6 @@
create_kmalloc_cache(&kmalloc_caches[1],
"kmalloc-96", 96, GFP_KERNEL);
caches++;
- }
- if (KMALLOC_MIN_SIZE <= 128) {
create_kmalloc_cache(&kmalloc_caches[2],
"kmalloc-192", 192, GFP_KERNEL);
caches++;
@@ -3026,6 +3025,16 @@
for (i = 8; i < KMALLOC_MIN_SIZE; i += 8)
size_index[(i - 1) / 8] = KMALLOC_SHIFT_LOW;
+ if (KMALLOC_MIN_SIZE == 128) {
+ /*
+ * The 192 byte sized cache is not used if the alignment
+ * is 128 byte. Redirect kmalloc to use the 256 byte cache
+ * instead.
+ */
+ for (i = 128 + 8; i <= 192; i += 8)
+ size_index[(i - 1) / 8] = 8;
+ }
+
slab_state = UP;
/* Provide the correct kmalloc names now that the caches are up */
diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c
index 99c4f36..a91b5f8 100644
--- a/mm/sparse-vmemmap.c
+++ b/mm/sparse-vmemmap.c
@@ -1,7 +1,7 @@
/*
* Virtual Memory Map support
*
- * (C) 2007 sgi. Christoph Lameter <clameter@sgi.com>.
+ * (C) 2007 sgi. Christoph Lameter.
*
* Virtual memory maps allow VM primitives pfn_to_page, page_to_pfn,
* virt_to_page, page_address() to be implemented as a base offset
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 9a29901..967d30c 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1307,7 +1307,7 @@
struct scan_control *sc)
{
int priority;
- int ret = 0;
+ unsigned long ret = 0;
unsigned long total_scanned = 0;
unsigned long nr_reclaimed = 0;
struct reclaim_state *reclaim_state = current->reclaim_state;
diff --git a/net/atm/br2684.c b/net/atm/br2684.c
index 9d52ebf..05fafdc 100644
--- a/net/atm/br2684.c
+++ b/net/atm/br2684.c
@@ -188,10 +188,13 @@
return 0;
}
}
- } else {
- skb_push(skb, 2);
- if (brdev->payload == p_bridged)
+ } else { /* e_vc */
+ if (brdev->payload == p_bridged) {
+ skb_push(skb, 2);
memset(skb->data, 0, 2);
+ } else { /* p_routed */
+ skb_pull(skb, ETH_HLEN);
+ }
}
skb_debug(skb);
@@ -377,11 +380,8 @@
(skb->data + 6, ethertype_ipv4,
sizeof(ethertype_ipv4)) == 0)
skb->protocol = __constant_htons(ETH_P_IP);
- else {
- brdev->stats.rx_errors++;
- dev_kfree_skb(skb);
- return;
- }
+ else
+ goto error;
skb_pull(skb, sizeof(llc_oui_ipv4));
skb_reset_network_header(skb);
skb->pkt_type = PACKET_HOST;
@@ -394,44 +394,56 @@
(memcmp(skb->data, llc_oui_pid_pad, 7) == 0)) {
skb_pull(skb, sizeof(llc_oui_pid_pad));
skb->protocol = eth_type_trans(skb, net_dev);
- } else {
- brdev->stats.rx_errors++;
- dev_kfree_skb(skb);
- return;
- }
+ } else
+ goto error;
- } else {
- /* first 2 chars should be 0 */
- if (*((u16 *) (skb->data)) != 0) {
- brdev->stats.rx_errors++;
- dev_kfree_skb(skb);
- return;
+ } else { /* e_vc */
+ if (brdev->payload == p_routed) {
+ struct iphdr *iph;
+
+ skb_reset_network_header(skb);
+ iph = ip_hdr(skb);
+ if (iph->version == 4)
+ skb->protocol = __constant_htons(ETH_P_IP);
+ else if (iph->version == 6)
+ skb->protocol = __constant_htons(ETH_P_IPV6);
+ else
+ goto error;
+ skb->pkt_type = PACKET_HOST;
+ } else { /* p_bridged */
+ /* first 2 chars should be 0 */
+ if (*((u16 *) (skb->data)) != 0)
+ goto error;
+ skb_pull(skb, BR2684_PAD_LEN);
+ skb->protocol = eth_type_trans(skb, net_dev);
}
- skb_pull(skb, BR2684_PAD_LEN + ETH_HLEN); /* pad, dstmac, srcmac, ethtype */
- skb->protocol = eth_type_trans(skb, net_dev);
}
#ifdef CONFIG_ATM_BR2684_IPFILTER
- if (unlikely(packet_fails_filter(skb->protocol, brvcc, skb))) {
- brdev->stats.rx_dropped++;
- dev_kfree_skb(skb);
- return;
- }
+ if (unlikely(packet_fails_filter(skb->protocol, brvcc, skb)))
+ goto dropped;
#endif /* CONFIG_ATM_BR2684_IPFILTER */
skb->dev = net_dev;
ATM_SKB(skb)->vcc = atmvcc; /* needed ? */
pr_debug("received packet's protocol: %x\n", ntohs(skb->protocol));
skb_debug(skb);
- if (unlikely(!(net_dev->flags & IFF_UP))) {
- /* sigh, interface is down */
- brdev->stats.rx_dropped++;
- dev_kfree_skb(skb);
- return;
- }
+ /* sigh, interface is down? */
+ if (unlikely(!(net_dev->flags & IFF_UP)))
+ goto dropped;
brdev->stats.rx_packets++;
brdev->stats.rx_bytes += skb->len;
memset(ATM_SKB(skb), 0, sizeof(struct atm_skb_data));
netif_rx(skb);
+ return;
+
+dropped:
+ brdev->stats.rx_dropped++;
+ goto free_skb;
+error:
+ brdev->stats.rx_errors++;
+free_skb:
+ dev_kfree_skb(skb);
+ return;
}
/*
@@ -518,9 +530,9 @@
struct sk_buff *next = skb->next;
skb->next = skb->prev = NULL;
+ br2684_push(atmvcc, skb);
BRPRIV(skb->dev)->stats.rx_bytes -= skb->len;
BRPRIV(skb->dev)->stats.rx_packets--;
- br2684_push(atmvcc, skb);
skb = next;
}
diff --git a/net/ax25/ax25_subr.c b/net/ax25/ax25_subr.c
index d8f2157..034aa10 100644
--- a/net/ax25/ax25_subr.c
+++ b/net/ax25/ax25_subr.c
@@ -64,20 +64,15 @@
void ax25_requeue_frames(ax25_cb *ax25)
{
- struct sk_buff *skb, *skb_prev = NULL;
+ struct sk_buff *skb;
/*
* Requeue all the un-ack-ed frames on the output queue to be picked
* up by ax25_kick called from the timer. This arrangement handles the
* possibility of an empty output queue.
*/
- while ((skb = skb_dequeue(&ax25->ack_queue)) != NULL) {
- if (skb_prev == NULL)
- skb_queue_head(&ax25->write_queue, skb);
- else
- skb_append(skb_prev, skb, &ax25->write_queue);
- skb_prev = skb;
- }
+ while ((skb = skb_dequeue_tail(&ax25->ack_queue)) != NULL)
+ skb_queue_head(&ax25->write_queue, skb);
}
/*
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index c3f749a..c919187 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -566,11 +566,22 @@
if (dlc->state == BT_CLOSED) {
if (!dev->tty) {
if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags)) {
- if (rfcomm_dev_get(dev->id) == NULL)
+ /* Drop DLC lock here to avoid deadlock
+ * 1. rfcomm_dev_get will take rfcomm_dev_lock
+ * but in rfcomm_dev_add there's lock order:
+ * rfcomm_dev_lock -> dlc lock
+ * 2. rfcomm_dev_put will deadlock if it's
+ * the last reference
+ */
+ rfcomm_dlc_unlock(dlc);
+ if (rfcomm_dev_get(dev->id) == NULL) {
+ rfcomm_dlc_lock(dlc);
return;
+ }
rfcomm_dev_del(dev);
rfcomm_dev_put(dev);
+ rfcomm_dlc_lock(dlc);
}
} else
tty_hangup(dev->tty);
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index c2397f5..f38cc53 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -442,12 +442,16 @@
void __exit br_cleanup_bridges(void)
{
- struct net_device *dev, *nxt;
+ struct net_device *dev;
rtnl_lock();
- for_each_netdev_safe(&init_net, dev, nxt)
- if (dev->priv_flags & IFF_EBRIDGE)
+restart:
+ for_each_netdev(&init_net, dev) {
+ if (dev->priv_flags & IFF_EBRIDGE) {
del_br(dev->priv);
+ goto restart;
+ }
+ }
rtnl_unlock();
}
diff --git a/net/can/af_can.c b/net/can/af_can.c
index 7e8ca28..484bbf6 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -205,12 +205,19 @@
* -ENOBUFS on full driver queue (see net_xmit_errno())
* -ENOMEM when local loopback failed at calling skb_clone()
* -EPERM when trying to send on a non-CAN interface
+ * -EINVAL when the skb->data does not contain a valid CAN frame
*/
int can_send(struct sk_buff *skb, int loop)
{
struct sk_buff *newskb = NULL;
+ struct can_frame *cf = (struct can_frame *)skb->data;
int err;
+ if (skb->len != sizeof(struct can_frame) || cf->can_dlc > 8) {
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+
if (skb->dev->type != ARPHRD_CAN) {
kfree_skb(skb);
return -EPERM;
@@ -605,6 +612,7 @@
struct packet_type *pt, struct net_device *orig_dev)
{
struct dev_rcv_lists *d;
+ struct can_frame *cf = (struct can_frame *)skb->data;
int matches;
if (dev->type != ARPHRD_CAN || dev_net(dev) != &init_net) {
@@ -612,6 +620,8 @@
return 0;
}
+ BUG_ON(skb->len != sizeof(struct can_frame) || cf->can_dlc > 8);
+
/* update statistics */
can_stats.rx_frames++;
can_stats.rx_frames_delta++;
diff --git a/net/can/bcm.c b/net/can/bcm.c
index d9a3a9d..72c2ce9 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -298,7 +298,7 @@
if (head->nframes) {
/* can_frames starting here */
- firstframe = (struct can_frame *) skb_tail_pointer(skb);
+ firstframe = (struct can_frame *)skb_tail_pointer(skb);
memcpy(skb_put(skb, datalen), frames, datalen);
@@ -826,6 +826,10 @@
for (i = 0; i < msg_head->nframes; i++) {
err = memcpy_fromiovec((u8 *)&op->frames[i],
msg->msg_iov, CFSIZ);
+
+ if (op->frames[i].can_dlc > 8)
+ err = -EINVAL;
+
if (err < 0)
return err;
@@ -858,6 +862,10 @@
for (i = 0; i < msg_head->nframes; i++) {
err = memcpy_fromiovec((u8 *)&op->frames[i],
msg->msg_iov, CFSIZ);
+
+ if (op->frames[i].can_dlc > 8)
+ err = -EINVAL;
+
if (err < 0) {
if (op->frames != &op->sframe)
kfree(op->frames);
@@ -1164,9 +1172,12 @@
skb->dev = dev;
skb->sk = sk;
- can_send(skb, 1); /* send with loopback */
+ err = can_send(skb, 1); /* send with loopback */
dev_put(dev);
+ if (err)
+ return err;
+
return CFSIZ + MHSIZ;
}
@@ -1185,6 +1196,10 @@
if (!bo->bound)
return -ENOTCONN;
+ /* check for valid message length from userspace */
+ if (size < MHSIZ || (size - MHSIZ) % CFSIZ)
+ return -EINVAL;
+
/* check for alternative ifindex for this bcm_op */
if (!ifindex && msg->msg_name) {
@@ -1259,8 +1274,8 @@
break;
case TX_SEND:
- /* we need at least one can_frame */
- if (msg_head.nframes < 1)
+ /* we need exactly one can_frame behind the msg head */
+ if ((msg_head.nframes != 1) || (size != CFSIZ + MHSIZ))
ret = -EINVAL;
else
ret = bcm_tx_send(msg, ifindex, sk);
diff --git a/net/can/raw.c b/net/can/raw.c
index 69877b8..3e46ee3 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -632,6 +632,9 @@
} else
ifindex = ro->ifindex;
+ if (size != sizeof(struct can_frame))
+ return -EINVAL;
+
dev = dev_get_by_index(&init_net, ifindex);
if (!dev)
return -ENXIO;
diff --git a/net/core/dev.c b/net/core/dev.c
index 5829630..fca23a3 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -119,6 +119,7 @@
#include <linux/err.h>
#include <linux/ctype.h>
#include <linux/if_arp.h>
+#include <linux/if_vlan.h>
#include "net-sysfs.h"
@@ -453,7 +454,7 @@
for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
if (s[i].name[0] == '\0' || s[i].name[0] == ' ') {
memset(s[i].name, 0, sizeof(s[i].name));
- strcpy(s[i].name, name);
+ strlcpy(s[i].name, name, IFNAMSIZ);
memcpy(&s[i].map, map, sizeof(s[i].map));
break;
}
@@ -478,7 +479,7 @@
for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
if (s[i].name[0] != '\0' && s[i].name[0] != ' ' &&
- !strncmp(dev->name, s[i].name, strlen(s[i].name))) {
+ !strcmp(dev->name, s[i].name)) {
dev->irq = s[i].map.irq;
dev->base_addr = s[i].map.base_addr;
dev->mem_start = s[i].map.mem_start;
@@ -1362,6 +1363,29 @@
}
EXPORT_SYMBOL(netif_device_attach);
+static bool can_checksum_protocol(unsigned long features, __be16 protocol)
+{
+ return ((features & NETIF_F_GEN_CSUM) ||
+ ((features & NETIF_F_IP_CSUM) &&
+ protocol == htons(ETH_P_IP)) ||
+ ((features & NETIF_F_IPV6_CSUM) &&
+ protocol == htons(ETH_P_IPV6)));
+}
+
+static bool dev_can_checksum(struct net_device *dev, struct sk_buff *skb)
+{
+ if (can_checksum_protocol(dev->features, skb->protocol))
+ return true;
+
+ if (skb->protocol == htons(ETH_P_8021Q)) {
+ struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data;
+ if (can_checksum_protocol(dev->features & dev->vlan_features,
+ veh->h_vlan_encapsulated_proto))
+ return true;
+ }
+
+ return false;
+}
/*
* Invalidate hardware checksum when packet is to be mangled, and
@@ -1640,14 +1664,8 @@
if (skb->ip_summed == CHECKSUM_PARTIAL) {
skb_set_transport_header(skb, skb->csum_start -
skb_headroom(skb));
-
- if (!(dev->features & NETIF_F_GEN_CSUM) &&
- !((dev->features & NETIF_F_IP_CSUM) &&
- skb->protocol == htons(ETH_P_IP)) &&
- !((dev->features & NETIF_F_IPV6_CSUM) &&
- skb->protocol == htons(ETH_P_IPV6)))
- if (skb_checksum_help(skb))
- goto out_kfree_skb;
+ if (!dev_can_checksum(dev, skb) && skb_checksum_help(skb))
+ goto out_kfree_skb;
}
gso:
@@ -2059,6 +2077,10 @@
rcu_read_lock();
+ /* Don't receive packets in an exiting network namespace */
+ if (!net_alive(dev_net(skb->dev)))
+ goto out;
+
#ifdef CONFIG_NET_CLS_ACT
if (skb->tc_verd & TC_NCLS) {
skb->tc_verd = CLR_TC_NCLS(skb->tc_verd);
@@ -2951,7 +2973,7 @@
/**
* dev_unicast_add - add a secondary unicast address
* @dev: device
- * @addr: address to delete
+ * @addr: address to add
* @alen: length of @addr
*
* Add a secondary unicast address to the device or increase
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index e3e9ab0..277a230 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -226,7 +226,7 @@
ops = lookup_rules_ops(net, frh->family);
if (ops == NULL) {
- err = EAFNOSUPPORT;
+ err = -EAFNOSUPPORT;
goto errout;
}
@@ -365,7 +365,7 @@
ops = lookup_rules_ops(net, frh->family);
if (ops == NULL) {
- err = EAFNOSUPPORT;
+ err = -EAFNOSUPPORT;
goto errout;
}
diff --git a/net/core/filter.c b/net/core/filter.c
index 4f83697..df37443 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -68,7 +68,6 @@
* sk_filter - run a packet through a socket filter
* @sk: sock associated with &sk_buff
* @skb: buffer to filter
- * @needlock: set to 1 if the sock is not locked by caller.
*
* Run the filter code and then cut skb->data to correct size returned by
* sk_run_filter. If pkt_len is 0 we toss packet. If skb->len is smaller
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 5d9d713..65f01f7 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -1714,7 +1714,8 @@
return nla_nest_end(skb, nest);
nla_put_failure:
- return nla_nest_cancel(skb, nest);
+ nla_nest_cancel(skb, nest);
+ return -EMSGSIZE;
}
static int neightbl_fill_info(struct sk_buff *skb, struct neigh_table *tbl,
@@ -2057,9 +2058,9 @@
goto nla_put_failure;
}
- ci.ndm_used = now - neigh->used;
- ci.ndm_confirmed = now - neigh->confirmed;
- ci.ndm_updated = now - neigh->updated;
+ ci.ndm_used = jiffies_to_clock_t(now - neigh->used);
+ ci.ndm_confirmed = jiffies_to_clock_t(now - neigh->confirmed);
+ ci.ndm_updated = jiffies_to_clock_t(now - neigh->updated);
ci.ndm_refcnt = atomic_read(&neigh->refcnt) - 1;
read_unlock_bh(&neigh->lock);
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 72b4c18..7c52fe2 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -140,6 +140,9 @@
struct pernet_operations *ops;
struct net *net;
+ /* Be very certain incoming network packets will not find us */
+ rcu_barrier();
+
net = container_of(work, struct net, work);
mutex_lock(&net_mutex);
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index cf857c4..a9a7721 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -498,7 +498,8 @@
return nla_nest_end(skb, mx);
nla_put_failure:
- return nla_nest_cancel(skb, mx);
+ nla_nest_cancel(skb, mx);
+ return -EMSGSIZE;
}
int rtnl_put_cacheinfo(struct sk_buff *skb, struct dst_entry *dst, u32 id,
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 5c459f2..3666216 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -1292,12 +1292,14 @@
{
unsigned int nr_pages = spd->nr_pages;
unsigned int poff, plen, len, toff, tlen;
- int headlen, seg;
+ int headlen, seg, error = 0;
toff = *offset;
tlen = *total_len;
- if (!tlen)
+ if (!tlen) {
+ error = 1;
goto err;
+ }
/*
* if the offset is greater than the linear part, go directly to
@@ -1339,7 +1341,8 @@
* just jump directly to update and return, no point
* in going over fragments when the output is full.
*/
- if (spd_fill_page(spd, virt_to_page(p), plen, poff, skb))
+ error = spd_fill_page(spd, virt_to_page(p), plen, poff, skb);
+ if (error)
goto done;
tlen -= plen;
@@ -1369,7 +1372,8 @@
if (!plen)
break;
- if (spd_fill_page(spd, f->page, plen, poff, skb))
+ error = spd_fill_page(spd, f->page, plen, poff, skb);
+ if (error)
break;
tlen -= plen;
@@ -1382,7 +1386,10 @@
return 0;
}
err:
- return 1;
+ /* update the offset to reflect the linear part skip, if any */
+ if (!error)
+ *offset = toff;
+ return error;
}
/*
@@ -1445,6 +1452,7 @@
if (spd.nr_pages) {
int ret;
+ struct sock *sk = __skb->sk;
/*
* Drop the socket lock, otherwise we have reverse
@@ -1455,9 +1463,9 @@
* we call into ->sendpage() with the i_mutex lock held
* and networking will grab the socket lock.
*/
- release_sock(__skb->sk);
+ release_sock(sk);
ret = splice_to_pipe(pipe, &spd);
- lock_sock(__skb->sk);
+ lock_sock(sk);
return ret;
}
diff --git a/net/core/user_dma.c b/net/core/user_dma.c
index 0ad1cd5..c77aff9 100644
--- a/net/core/user_dma.c
+++ b/net/core/user_dma.c
@@ -75,7 +75,7 @@
end = start + skb_shinfo(skb)->frags[i].size;
copy = end - offset;
- if ((copy = end - offset) > 0) {
+ if (copy > 0) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
struct page *page = frag->page;
diff --git a/net/dccp/ackvec.c b/net/dccp/ackvec.c
index 6de4bd1..1e8be24 100644
--- a/net/dccp/ackvec.c
+++ b/net/dccp/ackvec.c
@@ -290,12 +290,12 @@
while (1) {
const u8 len = dccp_ackvec_len(av, index);
- const u8 state = dccp_ackvec_state(av, index);
+ const u8 av_state = dccp_ackvec_state(av, index);
/*
* valid packets not yet in av_buf have a reserved
* entry, with a len equal to 0.
*/
- if (state == DCCP_ACKVEC_STATE_NOT_RECEIVED &&
+ if (av_state == DCCP_ACKVEC_STATE_NOT_RECEIVED &&
len == 0 && delta == 0) { /* Found our
reserved seat! */
dccp_pr_debug("Found %llu reserved seat!\n",
@@ -325,31 +325,6 @@
return -EILSEQ;
}
-#ifdef CONFIG_IP_DCCP_DEBUG
-void dccp_ackvector_print(const u64 ackno, const unsigned char *vector, int len)
-{
- dccp_pr_debug_cat("ACK vector len=%d, ackno=%llu |", len,
- (unsigned long long)ackno);
-
- while (len--) {
- const u8 state = (*vector & DCCP_ACKVEC_STATE_MASK) >> 6;
- const u8 rl = *vector & DCCP_ACKVEC_LEN_MASK;
-
- dccp_pr_debug_cat("%d,%d|", state, rl);
- ++vector;
- }
-
- dccp_pr_debug_cat("\n");
-}
-
-void dccp_ackvec_print(const struct dccp_ackvec *av)
-{
- dccp_ackvector_print(av->av_buf_ackno,
- av->av_buf + av->av_buf_head,
- av->av_vec_len);
-}
-#endif
-
static void dccp_ackvec_throw_record(struct dccp_ackvec *av,
struct dccp_ackvec_record *avr)
{
diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c
index f813077..a1929f3 100644
--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -159,8 +159,8 @@
} else if (ktime_us_delta(now, hctx->ccid3hctx_t_ld)
- (s64)hctx->ccid3hctx_rtt >= 0) {
- hctx->ccid3hctx_x =
- max(min(2 * hctx->ccid3hctx_x, min_rate),
+ hctx->ccid3hctx_x = min(2 * hctx->ccid3hctx_x, min_rate);
+ hctx->ccid3hctx_x = max(hctx->ccid3hctx_x,
scaled_div(((__u64)hctx->ccid3hctx_s) << 6,
hctx->ccid3hctx_rtt));
hctx->ccid3hctx_t_ld = now;
@@ -329,8 +329,14 @@
hctx->ccid3hctx_x = rfc3390_initial_rate(sk);
hctx->ccid3hctx_t_ld = now;
} else {
- /* Sender does not have RTT sample: X_pps = 1 pkt/sec */
- hctx->ccid3hctx_x = hctx->ccid3hctx_s;
+ /*
+ * Sender does not have RTT sample:
+ * - set fallback RTT (RFC 4340, 3.4) since a RTT value
+ * is needed in several parts (e.g. window counter);
+ * - set sending rate X_pps = 1pps as per RFC 3448, 4.2.
+ */
+ hctx->ccid3hctx_rtt = DCCP_FALLBACK_RTT;
+ hctx->ccid3hctx_x = hctx->ccid3hctx_s;
hctx->ccid3hctx_x <<= 6;
}
ccid3_update_send_interval(hctx);
diff --git a/net/dccp/ccids/lib/tfrc.c b/net/dccp/ccids/lib/tfrc.c
index d1dfbb8..97ecec0 100644
--- a/net/dccp/ccids/lib/tfrc.c
+++ b/net/dccp/ccids/lib/tfrc.c
@@ -14,14 +14,6 @@
MODULE_PARM_DESC(tfrc_debug, "Enable debug messages");
#endif
-extern int tfrc_tx_packet_history_init(void);
-extern void tfrc_tx_packet_history_exit(void);
-extern int tfrc_rx_packet_history_init(void);
-extern void tfrc_rx_packet_history_exit(void);
-
-extern int tfrc_li_init(void);
-extern void tfrc_li_exit(void);
-
static int __init tfrc_module_init(void)
{
int rc = tfrc_li_init();
diff --git a/net/dccp/ccids/lib/tfrc.h b/net/dccp/ccids/lib/tfrc.h
index 1fb1187..ed98575 100644
--- a/net/dccp/ccids/lib/tfrc.h
+++ b/net/dccp/ccids/lib/tfrc.h
@@ -15,7 +15,7 @@
* (at your option) any later version.
*/
#include <linux/types.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
#include "../../dccp.h"
/* internal includes that this module exports: */
#include "loss_interval.h"
@@ -29,21 +29,19 @@
#endif
/* integer-arithmetic divisions of type (a * 1000000)/b */
-static inline u64 scaled_div(u64 a, u32 b)
+static inline u64 scaled_div(u64 a, u64 b)
{
BUG_ON(b==0);
- a *= 1000000;
- do_div(a, b);
- return a;
+ return div64_u64(a * 1000000, b);
}
-static inline u32 scaled_div32(u64 a, u32 b)
+static inline u32 scaled_div32(u64 a, u64 b)
{
u64 result = scaled_div(a, b);
if (result > UINT_MAX) {
- DCCP_CRIT("Overflow: a(%llu)/b(%u) > ~0U",
- (unsigned long long)a, b);
+ DCCP_CRIT("Overflow: %llu/%llu > UINT_MAX",
+ (unsigned long long)a, (unsigned long long)b);
return UINT_MAX;
}
return result;
@@ -58,7 +56,14 @@
return avg ? (weight * avg + (10 - weight) * newval) / 10 : newval;
}
-extern u32 tfrc_calc_x(u16 s, u32 R, u32 p);
-extern u32 tfrc_calc_x_reverse_lookup(u32 fvalue);
+extern u32 tfrc_calc_x(u16 s, u32 R, u32 p);
+extern u32 tfrc_calc_x_reverse_lookup(u32 fvalue);
+extern int tfrc_tx_packet_history_init(void);
+extern void tfrc_tx_packet_history_exit(void);
+extern int tfrc_rx_packet_history_init(void);
+extern void tfrc_rx_packet_history_exit(void);
+
+extern int tfrc_li_init(void);
+extern void tfrc_li_exit(void);
#endif /* _TFRC_H_ */
diff --git a/net/dccp/ccids/lib/tfrc_equation.c b/net/dccp/ccids/lib/tfrc_equation.c
index e4e64b7..2f20a29 100644
--- a/net/dccp/ccids/lib/tfrc_equation.c
+++ b/net/dccp/ccids/lib/tfrc_equation.c
@@ -661,7 +661,7 @@
EXPORT_SYMBOL_GPL(tfrc_calc_x);
-/*
+/**
* tfrc_calc_x_reverse_lookup - try to find p given f(p)
*
* @fvalue: function value to match, scaled by 1000000
@@ -676,11 +676,11 @@
/* Error cases. */
if (fvalue < tfrc_calc_x_lookup[0][1]) {
- DCCP_WARN("fvalue %d smaller than resolution\n", fvalue);
- return tfrc_calc_x_lookup[0][1];
+ DCCP_WARN("fvalue %u smaller than resolution\n", fvalue);
+ return TFRC_SMALLEST_P;
}
if (fvalue > tfrc_calc_x_lookup[TFRC_CALC_X_ARRSIZE - 1][0]) {
- DCCP_WARN("fvalue %d exceeds bounds!\n", fvalue);
+ DCCP_WARN("fvalue %u exceeds bounds!\n", fvalue);
return 1000000;
}
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index c22a378..37d27bc 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -589,7 +589,7 @@
if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1)
goto drop;
- req = reqsk_alloc(&dccp_request_sock_ops);
+ req = inet_reqsk_alloc(&dccp_request_sock_ops);
if (req == NULL)
goto drop;
@@ -605,7 +605,6 @@
ireq = inet_rsk(req);
ireq->loc_addr = ip_hdr(skb)->daddr;
ireq->rmt_addr = ip_hdr(skb)->saddr;
- ireq->opt = NULL;
/*
* Step 3: Process LISTEN state
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index 9b1129b..f7fe2a5 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -421,7 +421,6 @@
ireq6 = inet6_rsk(req);
ipv6_addr_copy(&ireq6->rmt_addr, &ipv6_hdr(skb)->saddr);
ipv6_addr_copy(&ireq6->loc_addr, &ipv6_hdr(skb)->daddr);
- ireq6->pktopts = NULL;
if (ipv6_opt_accepted(sk, skb) ||
np->rxopt.bits.rxinfo || np->rxopt.bits.rxoinfo ||
diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c
index 33ad483..66dca5b 100644
--- a/net/dccp/minisocks.c
+++ b/net/dccp/minisocks.c
@@ -165,12 +165,12 @@
/* See dccp_v4_conn_request */
newdmsk->dccpms_sequence_window = req->rcv_wnd;
- newdp->dccps_gar = newdp->dccps_isr = dreq->dreq_isr;
- dccp_update_gsr(newsk, dreq->dreq_isr);
-
- newdp->dccps_iss = dreq->dreq_iss;
+ newdp->dccps_gar = newdp->dccps_iss = dreq->dreq_iss;
dccp_update_gss(newsk, dreq->dreq_iss);
+ newdp->dccps_isr = dreq->dreq_isr;
+ dccp_update_gsr(newsk, dreq->dreq_isr);
+
/*
* SWL and AWL are initially adjusted so that they are not less than
* the initial Sequence Numbers received and sent, respectively:
diff --git a/net/dccp/options.c b/net/dccp/options.c
index d2a84a2..43bc24e 100644
--- a/net/dccp/options.c
+++ b/net/dccp/options.c
@@ -107,9 +107,11 @@
*
* CCID-specific options are ignored during connection setup, as
* negotiation may still be in progress (see RFC 4340, 10.3).
+ * The same applies to Ack Vectors, as these depend on the CCID.
*
*/
- if (dreq != NULL && opt >= 128)
+ if (dreq != NULL && (opt >= 128 ||
+ opt == DCCPO_ACK_VECTOR_0 || opt == DCCPO_ACK_VECTOR_1))
goto ignore_option;
switch (opt) {
diff --git a/net/dccp/output.c b/net/dccp/output.c
index 1f8a9b6..fe20068 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c
@@ -508,6 +508,7 @@
EXPORT_SYMBOL_GPL(dccp_send_ack);
+#if 0
/* FIXME: Is this still necessary (11.3) - currently nowhere used by DCCP. */
void dccp_send_delayed_ack(struct sock *sk)
{
@@ -538,6 +539,7 @@
icsk->icsk_ack.timeout = timeout;
sk_reset_timer(sk, &icsk->icsk_delack_timer, timeout);
}
+#endif
void dccp_send_sync(struct sock *sk, const u64 ackno,
const enum dccp_pkt_type pkt_type)
diff --git a/net/dccp/probe.c b/net/dccp/probe.c
index 0bcdc92..81368a7 100644
--- a/net/dccp/probe.c
+++ b/net/dccp/probe.c
@@ -42,7 +42,7 @@
static const char procname[] = "dccpprobe";
-struct {
+static struct {
struct kfifo *fifo;
spinlock_t lock;
wait_queue_head_t wait;
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 6848e47..79a7ef6 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -90,7 +90,6 @@
[IFA_LOCAL] = { .type = NLA_U32 },
[IFA_ADDRESS] = { .type = NLA_U32 },
[IFA_BROADCAST] = { .type = NLA_U32 },
- [IFA_ANYCAST] = { .type = NLA_U32 },
[IFA_LABEL] = { .type = NLA_STRING, .len = IFNAMSIZ - 1 },
};
@@ -536,9 +535,6 @@
if (tb[IFA_BROADCAST])
ifa->ifa_broadcast = nla_get_be32(tb[IFA_BROADCAST]);
- if (tb[IFA_ANYCAST])
- ifa->ifa_anycast = nla_get_be32(tb[IFA_ANYCAST]);
-
if (tb[IFA_LABEL])
nla_strlcpy(ifa->ifa_label, tb[IFA_LABEL], IFNAMSIZ);
else
@@ -745,7 +741,6 @@
break;
inet_del_ifa(in_dev, ifap, 0);
ifa->ifa_broadcast = 0;
- ifa->ifa_anycast = 0;
ifa->ifa_scope = 0;
}
@@ -1113,7 +1108,6 @@
+ nla_total_size(4) /* IFA_ADDRESS */
+ nla_total_size(4) /* IFA_LOCAL */
+ nla_total_size(4) /* IFA_BROADCAST */
- + nla_total_size(4) /* IFA_ANYCAST */
+ nla_total_size(IFNAMSIZ); /* IFA_LABEL */
}
@@ -1143,9 +1137,6 @@
if (ifa->ifa_broadcast)
NLA_PUT_BE32(skb, IFA_BROADCAST, ifa->ifa_broadcast);
- if (ifa->ifa_anycast)
- NLA_PUT_BE32(skb, IFA_ANYCAST, ifa->ifa_anycast);
-
if (ifa->ifa_label[0])
NLA_PUT_STRING(skb, IFA_LABEL, ifa->ifa_label);
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 0f1557a..0b2ac6a 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -506,7 +506,6 @@
[RTA_PREFSRC] = { .type = NLA_U32 },
[RTA_METRICS] = { .type = NLA_NESTED },
[RTA_MULTIPATH] = { .len = sizeof(struct rtnexthop) },
- [RTA_PROTOINFO] = { .type = NLA_U32 },
[RTA_FLOW] = { .type = NLA_U32 },
};
diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c
index 3b83c34..0d4d728 100644
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -960,7 +960,10 @@
rtm->rtm_dst_len = dst_len;
rtm->rtm_src_len = 0;
rtm->rtm_tos = tos;
- rtm->rtm_table = tb_id;
+ if (tb_id < 256)
+ rtm->rtm_table = tb_id;
+ else
+ rtm->rtm_table = RT_TABLE_COMPAT;
NLA_PUT_U32(skb, RTA_TABLE, tb_id);
rtm->rtm_type = type;
rtm->rtm_flags = fi->fib_flags;
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 4b02d14..e1600ad 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -1359,17 +1359,17 @@
t->stats.semantic_match_miss++;
#endif
if (err <= 0)
- return plen;
+ return err;
}
- return -1;
+ return 1;
}
static int fn_trie_lookup(struct fib_table *tb, const struct flowi *flp,
struct fib_result *res)
{
struct trie *t = (struct trie *) tb->tb_data;
- int plen, ret = 0;
+ int ret;
struct node *n;
struct tnode *pn;
int pos, bits;
@@ -1393,10 +1393,7 @@
/* Just a leaf? */
if (IS_LEAF(n)) {
- plen = check_leaf(t, (struct leaf *)n, key, flp, res);
- if (plen < 0)
- goto failed;
- ret = 0;
+ ret = check_leaf(t, (struct leaf *)n, key, flp, res);
goto found;
}
@@ -1421,11 +1418,9 @@
}
if (IS_LEAF(n)) {
- plen = check_leaf(t, (struct leaf *)n, key, flp, res);
- if (plen < 0)
+ ret = check_leaf(t, (struct leaf *)n, key, flp, res);
+ if (ret > 0)
goto backtrace;
-
- ret = 0;
goto found;
}
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index 828ea21..ec83448 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -419,7 +419,8 @@
struct inet_connection_sock *icsk = inet_csk(parent);
struct request_sock_queue *queue = &icsk->icsk_accept_queue;
struct listen_sock *lopt = queue->listen_opt;
- int thresh = icsk->icsk_syn_retries ? : sysctl_tcp_synack_retries;
+ int max_retries = icsk->icsk_syn_retries ? : sysctl_tcp_synack_retries;
+ int thresh = max_retries;
unsigned long now = jiffies;
struct request_sock **reqp, *req;
int i, budget;
@@ -455,6 +456,9 @@
}
}
+ if (queue->rskq_defer_accept)
+ max_retries = queue->rskq_defer_accept;
+
budget = 2 * (lopt->nr_table_entries / (timeout / interval));
i = lopt->clock_hand;
@@ -462,8 +466,9 @@
reqp=&lopt->syn_table[i];
while ((req = *reqp) != NULL) {
if (time_after_eq(now, req->expires)) {
- if (req->retrans < thresh &&
- !req->rsk_ops->rtx_syn_ack(parent, req)) {
+ if ((req->retrans < thresh ||
+ (inet_rsk(req)->acked && req->retrans < max_retries))
+ && !req->rsk_ops->rtx_syn_ack(parent, req)) {
unsigned long timeo;
if (req->retrans++ == 0)
diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c
index 4ed429b..0546a0b 100644
--- a/net/ipv4/inet_fragment.c
+++ b/net/ipv4/inet_fragment.c
@@ -192,14 +192,21 @@
static struct inet_frag_queue *inet_frag_intern(struct netns_frags *nf,
struct inet_frag_queue *qp_in, struct inet_frags *f,
- unsigned int hash, void *arg)
+ void *arg)
{
struct inet_frag_queue *qp;
#ifdef CONFIG_SMP
struct hlist_node *n;
#endif
+ unsigned int hash;
write_lock(&f->lock);
+ /*
+ * While we stayed w/o the lock other CPU could update
+ * the rnd seed, so we need to re-calculate the hash
+ * chain. Fortunatelly the qp_in can be used to get one.
+ */
+ hash = f->hashfn(qp_in);
#ifdef CONFIG_SMP
/* With SMP race we have to recheck hash table, because
* such entry could be created on other cpu, while we
@@ -247,7 +254,7 @@
}
static struct inet_frag_queue *inet_frag_create(struct netns_frags *nf,
- struct inet_frags *f, void *arg, unsigned int hash)
+ struct inet_frags *f, void *arg)
{
struct inet_frag_queue *q;
@@ -255,7 +262,7 @@
if (q == NULL)
return NULL;
- return inet_frag_intern(nf, q, f, hash, arg);
+ return inet_frag_intern(nf, q, f, arg);
}
struct inet_frag_queue *inet_frag_find(struct netns_frags *nf,
@@ -264,7 +271,6 @@
struct inet_frag_queue *q;
struct hlist_node *n;
- read_lock(&f->lock);
hlist_for_each_entry(q, n, &f->hash[hash], list) {
if (q->net == nf && f->match(q, key)) {
atomic_inc(&q->refcnt);
@@ -274,6 +280,6 @@
}
read_unlock(&f->lock);
- return inet_frag_create(nf, f, key, hash);
+ return inet_frag_create(nf, f, key);
}
EXPORT_SYMBOL(inet_frag_find);
diff --git a/net/ipv4/inet_lro.c b/net/ipv4/inet_lro.c
index 4a4d49f..cfd034a 100644
--- a/net/ipv4/inet_lro.c
+++ b/net/ipv4/inet_lro.c
@@ -383,8 +383,7 @@
out2: /* send aggregated SKBs to stack */
lro_flush(lro_mgr, lro_desc);
-out: /* Original SKB has to be posted to stack */
- skb->ip_summed = lro_mgr->ip_summed;
+out:
return 1;
}
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index cd6ce6a..37221f6 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -229,6 +229,8 @@
arg.iph = iph;
arg.user = user;
+
+ read_lock(&ip4_frags.lock);
hash = ipqhashfn(iph->id, iph->saddr, iph->daddr, iph->protocol);
q = inet_frag_find(&net->ipv4.frags, &ip4_frags, &arg, hash);
diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c
index 0457859..d2a887f 100644
--- a/net/ipv4/netfilter/nf_nat_core.c
+++ b/net/ipv4/netfilter/nf_nat_core.c
@@ -556,7 +556,6 @@
spin_lock_bh(&nf_nat_lock);
hlist_del_rcu(&nat->bysource);
- nat->ct = NULL;
spin_unlock_bh(&nf_nat_lock);
}
@@ -570,8 +569,8 @@
return;
spin_lock_bh(&nf_nat_lock);
- hlist_replace_rcu(&old_nat->bysource, &new_nat->bysource);
new_nat->ct = ct;
+ hlist_replace_rcu(&old_nat->bysource, &new_nat->bysource);
spin_unlock_bh(&nf_nat_lock);
}
diff --git a/net/ipv4/netfilter/nf_nat_snmp_basic.c b/net/ipv4/netfilter/nf_nat_snmp_basic.c
index 5daefad..ffeaffc 100644
--- a/net/ipv4/netfilter/nf_nat_snmp_basic.c
+++ b/net/ipv4/netfilter/nf_nat_snmp_basic.c
@@ -232,6 +232,11 @@
}
}
}
+
+ /* don't trust len bigger than ctx buffer */
+ if (*len > ctx->end - ctx->pointer)
+ return 0;
+
return 1;
}
@@ -250,6 +255,10 @@
if (!asn1_length_decode(ctx, &def, &len))
return 0;
+ /* primitive shall be definite, indefinite shall be constructed */
+ if (*con == ASN1_PRI && !def)
+ return 0;
+
if (def)
*eoc = ctx->pointer + len;
else
@@ -430,10 +439,15 @@
unsigned int *len)
{
unsigned long subid;
- unsigned int size;
unsigned long *optr;
+ size_t size;
size = eoc - ctx->pointer + 1;
+
+ /* first subid actually encodes first two subids */
+ if (size < 2 || size > ULONG_MAX/sizeof(unsigned long))
+ return 0;
+
*oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC);
if (*oid == NULL) {
if (net_ratelimit())
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index fead049..37a1ecd 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -608,6 +608,14 @@
sk_common_release(sk);
}
+static int raw_destroy(struct sock *sk)
+{
+ lock_sock(sk);
+ ip_flush_pending_frames(sk);
+ release_sock(sk);
+ return 0;
+}
+
/* This gets rid of all the nasties in af_inet. -DaveM */
static int raw_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
{
@@ -820,6 +828,7 @@
.name = "RAW",
.owner = THIS_MODULE,
.close = raw_close,
+ .destroy = raw_destroy,
.connect = ip4_datagram_connect,
.disconnect = udp_disconnect,
.ioctl = raw_ioctl,
@@ -925,7 +934,7 @@
srcp = inet->num;
seq_printf(seq, "%4d: %08X:%04X %08X:%04X"
- " %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d",
+ " %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d\n",
i, src, srcp, dest, destp, sp->sk_state,
atomic_read(&sp->sk_wmem_alloc),
atomic_read(&sp->sk_rmem_alloc),
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index df41026..96be336 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1792,7 +1792,7 @@
if (err)
flags |= RTCF_DIRECTSRC;
- if (out_dev == in_dev && err && !(flags & RTCF_MASQ) &&
+ if (out_dev == in_dev && err &&
(IN_DEV_SHARED_MEDIA(out_dev) ||
inet_addr_onlink(out_dev, saddr, FIB_RES_GW(*res))))
flags |= RTCF_DOREDIRECT;
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index 73ba989..d182a2a 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -285,7 +285,7 @@
cookie_check_timestamp(&tcp_opt);
ret = NULL;
- req = reqsk_alloc(&tcp_request_sock_ops); /* for safety */
+ req = inet_reqsk_alloc(&tcp_request_sock_ops); /* for safety */
if (!req)
goto out;
@@ -301,7 +301,6 @@
ireq->rmt_port = th->source;
ireq->loc_addr = ip_hdr(skb)->daddr;
ireq->rmt_addr = ip_hdr(skb)->saddr;
- ireq->opt = NULL;
ireq->snd_wscale = tcp_opt.snd_wscale;
ireq->rcv_wscale = tcp_opt.rcv_wscale;
ireq->sack_ok = tcp_opt.sack_ok;
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index f886531..1d723de1 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -255,11 +255,14 @@
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/skbuff.h>
+#include <linux/scatterlist.h>
#include <linux/splice.h>
#include <linux/net.h>
#include <linux/socket.h>
#include <linux/random.h>
#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/swap.h>
#include <linux/cache.h>
#include <linux/err.h>
#include <linux/crypto.h>
@@ -1206,7 +1209,8 @@
return -ENOTCONN;
while ((skb = tcp_recv_skb(sk, seq, &offset)) != NULL) {
if (offset < skb->len) {
- size_t used, len;
+ int used;
+ size_t len;
len = skb->len - offset;
/* Stop reading if we hit a patch of urgent data */
@@ -1227,7 +1231,14 @@
copied += used;
offset += used;
}
- if (offset != skb->len)
+ /*
+ * If recv_actor drops the lock (e.g. TCP splice
+ * receive) the skb pointer might be invalid when
+ * getting here: tcp_collapse might have deleted it
+ * while aggregating skbs from the socket queue.
+ */
+ skb = tcp_recv_skb(sk, seq-1, &offset);
+ if (!skb || (offset+1 != skb->len))
break;
}
if (tcp_hdr(skb)->fin) {
@@ -2105,12 +2116,15 @@
break;
case TCP_DEFER_ACCEPT:
- if (val < 0) {
- err = -EINVAL;
- } else {
- if (val > MAX_TCP_ACCEPT_DEFERRED)
- val = MAX_TCP_ACCEPT_DEFERRED;
- icsk->icsk_accept_queue.rskq_defer_accept = val;
+ icsk->icsk_accept_queue.rskq_defer_accept = 0;
+ if (val > 0) {
+ /* Translate value in seconds to number of
+ * retransmits */
+ while (icsk->icsk_accept_queue.rskq_defer_accept < 32 &&
+ val > ((TCP_TIMEOUT_INIT / HZ) <<
+ icsk->icsk_accept_queue.rskq_defer_accept))
+ icsk->icsk_accept_queue.rskq_defer_accept++;
+ icsk->icsk_accept_queue.rskq_defer_accept++;
}
break;
@@ -2292,7 +2306,8 @@
val = (val ? : sysctl_tcp_fin_timeout) / HZ;
break;
case TCP_DEFER_ACCEPT:
- val = icsk->icsk_accept_queue.rskq_defer_accept;
+ val = !icsk->icsk_accept_queue.rskq_defer_accept ? 0 :
+ ((TCP_TIMEOUT_INIT / HZ) << (icsk->icsk_accept_queue.rskq_defer_accept - 1));
break;
case TCP_WINDOW_CLAMP:
val = tp->window_clamp;
@@ -2609,7 +2624,7 @@
void __init tcp_init(void)
{
struct sk_buff *skb = NULL;
- unsigned long limit;
+ unsigned long nr_pages, limit;
int order, i, max_share;
BUILD_BUG_ON(sizeof(struct tcp_skb_cb) > sizeof(skb->cb));
@@ -2678,8 +2693,9 @@
* is up to 1/2 at 256 MB, decreasing toward zero with the amount of
* memory, with a floor of 128 pages.
*/
- limit = min(nr_all_pages, 1UL<<(28-PAGE_SHIFT)) >> (20-PAGE_SHIFT);
- limit = (limit * (nr_all_pages >> (20-PAGE_SHIFT))) >> (PAGE_SHIFT-11);
+ nr_pages = totalram_pages - totalhigh_pages;
+ limit = min(nr_pages, 1UL<<(28-PAGE_SHIFT)) >> (20-PAGE_SHIFT);
+ limit = (limit * (nr_pages >> (20-PAGE_SHIFT))) >> (PAGE_SHIFT-11);
limit = max(limit, 128UL);
sysctl_tcp_mem[0] = limit / 4 * 3;
sysctl_tcp_mem[1] = limit;
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index b54d9d3..cad73b7 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1392,9 +1392,9 @@
if (before(next_dup->start_seq, skip_to_seq)) {
skb = tcp_sacktag_skip(skb, sk, next_dup->start_seq, fack_count);
- tcp_sacktag_walk(skb, sk, NULL,
- next_dup->start_seq, next_dup->end_seq,
- 1, fack_count, reord, flag);
+ skb = tcp_sacktag_walk(skb, sk, NULL,
+ next_dup->start_seq, next_dup->end_seq,
+ 1, fack_count, reord, flag);
}
return skb;
@@ -2483,6 +2483,20 @@
tcp_ca_event(sk, CA_EVENT_COMPLETE_CWR);
}
+static void tcp_try_keep_open(struct sock *sk)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ int state = TCP_CA_Open;
+
+ if (tcp_left_out(tp) || tp->retrans_out || tp->undo_marker)
+ state = TCP_CA_Disorder;
+
+ if (inet_csk(sk)->icsk_ca_state != state) {
+ tcp_set_ca_state(sk, state);
+ tp->high_seq = tp->snd_nxt;
+ }
+}
+
static void tcp_try_to_open(struct sock *sk, int flag)
{
struct tcp_sock *tp = tcp_sk(sk);
@@ -2496,15 +2510,7 @@
tcp_enter_cwr(sk, 1);
if (inet_csk(sk)->icsk_ca_state != TCP_CA_CWR) {
- int state = TCP_CA_Open;
-
- if (tcp_left_out(tp) || tp->retrans_out || tp->undo_marker)
- state = TCP_CA_Disorder;
-
- if (inet_csk(sk)->icsk_ca_state != state) {
- tcp_set_ca_state(sk, state);
- tp->high_seq = tp->snd_nxt;
- }
+ tcp_try_keep_open(sk);
tcp_moderate_cwnd(tp);
} else {
tcp_cwnd_down(sk, flag);
@@ -3310,8 +3316,11 @@
return 1;
old_ack:
- if (TCP_SKB_CB(skb)->sacked)
+ if (TCP_SKB_CB(skb)->sacked) {
tcp_sacktag_write_queue(sk, skb, prior_snd_una);
+ if (icsk->icsk_ca_state == TCP_CA_Open)
+ tcp_try_keep_open(sk);
+ }
uninteresting_ack:
SOCK_DEBUG(sk, "Ack %u out of %u:%u\n", ack, tp->snd_una, tp->snd_nxt);
@@ -4532,49 +4541,6 @@
}
}
-static int tcp_defer_accept_check(struct sock *sk)
-{
- struct tcp_sock *tp = tcp_sk(sk);
-
- if (tp->defer_tcp_accept.request) {
- int queued_data = tp->rcv_nxt - tp->copied_seq;
- int hasfin = !skb_queue_empty(&sk->sk_receive_queue) ?
- tcp_hdr((struct sk_buff *)
- sk->sk_receive_queue.prev)->fin : 0;
-
- if (queued_data && hasfin)
- queued_data--;
-
- if (queued_data &&
- tp->defer_tcp_accept.listen_sk->sk_state == TCP_LISTEN) {
- if (sock_flag(sk, SOCK_KEEPOPEN)) {
- inet_csk_reset_keepalive_timer(sk,
- keepalive_time_when(tp));
- } else {
- inet_csk_delete_keepalive_timer(sk);
- }
-
- inet_csk_reqsk_queue_add(
- tp->defer_tcp_accept.listen_sk,
- tp->defer_tcp_accept.request,
- sk);
-
- tp->defer_tcp_accept.listen_sk->sk_data_ready(
- tp->defer_tcp_accept.listen_sk, 0);
-
- sock_put(tp->defer_tcp_accept.listen_sk);
- sock_put(sk);
- tp->defer_tcp_accept.listen_sk = NULL;
- tp->defer_tcp_accept.request = NULL;
- } else if (hasfin ||
- tp->defer_tcp_accept.listen_sk->sk_state != TCP_LISTEN) {
- tcp_reset(sk);
- return -1;
- }
- }
- return 0;
-}
-
static int tcp_copy_to_iovec(struct sock *sk, struct sk_buff *skb, int hlen)
{
struct tcp_sock *tp = tcp_sk(sk);
@@ -4935,8 +4901,6 @@
tcp_data_snd_check(sk);
tcp_ack_snd_check(sk);
-
- tcp_defer_accept_check(sk);
return 0;
csum_error:
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index cd601a8..ffe869a 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -85,10 +85,6 @@
int sysctl_tcp_tw_reuse __read_mostly;
int sysctl_tcp_low_latency __read_mostly;
-/* Check TCP sequence numbers in ICMP packets. */
-#define ICMP_MIN_LENGTH 8
-
-void tcp_v4_send_check(struct sock *sk, int len, struct sk_buff *skb);
#ifdef CONFIG_TCP_MD5SIG
static struct tcp_md5sig_key *tcp_v4_md5_do_lookup(struct sock *sk,
@@ -1285,7 +1281,7 @@
if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1)
goto drop;
- req = reqsk_alloc(&tcp_request_sock_ops);
+ req = inet_reqsk_alloc(&tcp_request_sock_ops);
if (!req)
goto drop;
@@ -1918,14 +1914,6 @@
sk->sk_sndmsg_page = NULL;
}
- if (tp->defer_tcp_accept.request) {
- reqsk_free(tp->defer_tcp_accept.request);
- sock_put(tp->defer_tcp_accept.listen_sk);
- sock_put(sk);
- tp->defer_tcp_accept.listen_sk = NULL;
- tp->defer_tcp_accept.request = NULL;
- }
-
atomic_dec(&tcp_sockets_allocated);
return 0;
@@ -2303,7 +2291,7 @@
}
seq_printf(f, "%4d: %08X:%04X %08X:%04X %02X %08X:%08X %02X:%08lX "
- "%08X %5d %8d %lu %d %p %u %u %u %u %d%n",
+ "%08X %5d %8d %lu %d %p %lu %lu %u %u %d%n",
i, src, srcp, dest, destp, sk->sk_state,
tp->write_seq - tp->snd_una,
sk->sk_state == TCP_LISTEN ? sk->sk_ack_backlog :
@@ -2315,8 +2303,8 @@
icsk->icsk_probes_out,
sock_i_ino(sk),
atomic_read(&sk->sk_refcnt), sk,
- icsk->icsk_rto,
- icsk->icsk_ack.ato,
+ jiffies_to_clock_t(icsk->icsk_rto),
+ jiffies_to_clock_t(icsk->icsk_ack.ato),
(icsk->icsk_ack.quick << 1) | icsk->icsk_ack.pingpong,
tp->snd_cwnd,
tp->snd_ssthresh >= 0xFFFF ? -1 : tp->snd_ssthresh,
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 019c8c1..8245247 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -571,8 +571,10 @@
does sequence test, SYN is truncated, and thus we consider
it a bare ACK.
- Both ends (listening sockets) accept the new incoming
- connection and try to talk to each other. 8-)
+ If icsk->icsk_accept_queue.rskq_defer_accept, we silently drop this
+ bare ACK. Otherwise, we create an established connection. Both
+ ends (listening sockets) accept the new incoming connection and try
+ to talk to each other. 8-)
Note: This case is both harmless, and rare. Possibility is about the
same as us discovering intelligent life on another plant tomorrow.
@@ -640,6 +642,13 @@
if (!(flg & TCP_FLAG_ACK))
return NULL;
+ /* If TCP_DEFER_ACCEPT is set, drop bare ACK. */
+ if (inet_csk(sk)->icsk_accept_queue.rskq_defer_accept &&
+ TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) {
+ inet_rsk(req)->acked = 1;
+ return NULL;
+ }
+
/* OK, ACK is valid, create big socket and
* feed this segment to it. It will repeat all
* the tests. THIS SEGMENT MUST MOVE SOCKET TO
@@ -678,24 +687,7 @@
inet_csk_reqsk_queue_unlink(sk, req, prev);
inet_csk_reqsk_queue_removed(sk, req);
- if (inet_csk(sk)->icsk_accept_queue.rskq_defer_accept &&
- TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) {
-
- /* the accept queue handling is done is est recv slow
- * path so lets make sure to start there
- */
- tcp_sk(child)->pred_flags = 0;
- sock_hold(sk);
- sock_hold(child);
- tcp_sk(child)->defer_tcp_accept.listen_sk = sk;
- tcp_sk(child)->defer_tcp_accept.request = req;
-
- inet_csk_reset_keepalive_timer(child,
- inet_csk(sk)->icsk_accept_queue.rskq_defer_accept * HZ);
- } else {
- inet_csk_reqsk_queue_add(sk, req, child);
- }
-
+ inet_csk_reqsk_queue_add(sk, req, child);
return child;
listen_overflow:
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index e399bde..ad993ec 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2131,6 +2131,8 @@
TCP_SKB_CB(skb)->when = tcp_time_stamp;
if (tcp_transmit_skb(sk, skb, 0, priority))
NET_INC_STATS(LINUX_MIB_TCPABORTFAILED);
+
+ TCP_INC_STATS(TCP_MIB_OUTRSTS);
}
/* WARNING: This routine must only be called when we have already sent
diff --git a/net/ipv4/tcp_probe.c b/net/ipv4/tcp_probe.c
index 5ff0ce6..7ddc30f 100644
--- a/net/ipv4/tcp_probe.c
+++ b/net/ipv4/tcp_probe.c
@@ -224,7 +224,7 @@
if (bufsize < 0)
return -EINVAL;
- tcp_probe.log = kcalloc(sizeof(struct tcp_log), bufsize, GFP_KERNEL);
+ tcp_probe.log = kcalloc(bufsize, sizeof(struct tcp_log), GFP_KERNEL);
if (!tcp_probe.log)
goto err0;
diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c
index 4de68cf..63ed9d6 100644
--- a/net/ipv4/tcp_timer.c
+++ b/net/ipv4/tcp_timer.c
@@ -489,11 +489,6 @@
goto death;
}
- if (tp->defer_tcp_accept.request && sk->sk_state == TCP_ESTABLISHED) {
- tcp_send_active_reset(sk, GFP_ATOMIC);
- goto death;
- }
-
if (!sock_flag(sk, SOCK_KEEPOPEN) || sk->sk_state == TCP_CLOSE)
goto out;
diff --git a/net/ipv4/tunnel4.c b/net/ipv4/tunnel4.c
index d3b709a..cb1f0e8 100644
--- a/net/ipv4/tunnel4.c
+++ b/net/ipv4/tunnel4.c
@@ -97,7 +97,7 @@
{
struct xfrm_tunnel *handler;
- if (!pskb_may_pull(skb, sizeof(struct iphdr)))
+ if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
goto drop;
for (handler = tunnel64_handlers; handler; handler = handler->next)
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index db1cb7c..56fcda3 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -420,7 +420,7 @@
/*
* Throw away all pending data and cancel the corking. Socket is locked.
*/
-static void udp_flush_pending_frames(struct sock *sk)
+void udp_flush_pending_frames(struct sock *sk)
{
struct udp_sock *up = udp_sk(sk);
@@ -430,6 +430,7 @@
ip_flush_pending_frames(sk);
}
}
+EXPORT_SYMBOL(udp_flush_pending_frames);
/**
* udp4_hwcsum_outgoing - handle outgoing HW checksumming
diff --git a/net/ipv4/xfrm4_mode_tunnel.c b/net/ipv4/xfrm4_mode_tunnel.c
index 584e6d7..7135279 100644
--- a/net/ipv4/xfrm4_mode_tunnel.c
+++ b/net/ipv4/xfrm4_mode_tunnel.c
@@ -52,7 +52,7 @@
IP_ECN_clear(top_iph);
top_iph->frag_off = (flags & XFRM_STATE_NOPMTUDISC) ?
- 0 : XFRM_MODE_SKB_CB(skb)->frag_off;
+ 0 : (XFRM_MODE_SKB_CB(skb)->frag_off & htons(IP_DF));
ip_select_ident(top_iph, dst->child, NULL);
top_iph->ttl = dst_metric(dst->child, RTAX_HOPLIMIT);
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 3a83557..ff61a5c 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -731,8 +731,13 @@
onlink = -1;
spin_lock(&ifa->lock);
- lifetime = min_t(unsigned long,
- ifa->valid_lft, 0x7fffffffUL/HZ);
+
+ lifetime = addrconf_timeout_fixup(ifa->valid_lft, HZ);
+ /*
+ * Note: Because this address is
+ * not permanent, lifetime <
+ * LONG_MAX / HZ here.
+ */
if (time_before(expires,
ifa->tstamp + lifetime * HZ))
expires = ifa->tstamp + lifetime * HZ;
@@ -744,12 +749,12 @@
}
write_unlock_bh(&idev->lock);
+ addrconf_del_timer(ifp);
+
ipv6_ifa_notify(RTM_DELADDR, ifp);
atomic_notifier_call_chain(&inet6addr_chain, NETDEV_DOWN, ifp);
- addrconf_del_timer(ifp);
-
/*
* Purge or update corresponding prefix
*
@@ -1722,7 +1727,6 @@
__u32 valid_lft;
__u32 prefered_lft;
int addr_type;
- unsigned long rt_expires;
struct inet6_dev *in6_dev;
pinfo = (struct prefix_info *) opt;
@@ -1764,28 +1768,23 @@
* 2) Configure prefixes with the auto flag set
*/
- if (valid_lft == INFINITY_LIFE_TIME)
- rt_expires = ~0UL;
- else if (valid_lft >= 0x7FFFFFFF/HZ) {
+ if (pinfo->onlink) {
+ struct rt6_info *rt;
+ unsigned long rt_expires;
+
/* Avoid arithmetic overflow. Really, we could
* save rt_expires in seconds, likely valid_lft,
* but it would require division in fib gc, that it
* not good.
*/
- rt_expires = 0x7FFFFFFF - (0x7FFFFFFF % HZ);
- } else
- rt_expires = valid_lft * HZ;
+ if (HZ > USER_HZ)
+ rt_expires = addrconf_timeout_fixup(valid_lft, HZ);
+ else
+ rt_expires = addrconf_timeout_fixup(valid_lft, USER_HZ);
- /*
- * We convert this (in jiffies) to clock_t later.
- * Avoid arithmetic overflow there as well.
- * Overflow can happen only if HZ < USER_HZ.
- */
- if (HZ < USER_HZ && ~rt_expires && rt_expires > 0x7FFFFFFF / USER_HZ)
- rt_expires = 0x7FFFFFFF / USER_HZ;
+ if (addrconf_finite_timeout(rt_expires))
+ rt_expires *= HZ;
- if (pinfo->onlink) {
- struct rt6_info *rt;
rt = rt6_lookup(dev_net(dev), &pinfo->prefix, NULL,
dev->ifindex, 1);
@@ -1794,7 +1793,7 @@
if (valid_lft == 0) {
ip6_del_rt(rt);
rt = NULL;
- } else if (~rt_expires) {
+ } else if (addrconf_finite_timeout(rt_expires)) {
/* not infinity */
rt->rt6i_expires = jiffies + rt_expires;
rt->rt6i_flags |= RTF_EXPIRES;
@@ -1803,9 +1802,9 @@
rt->rt6i_expires = 0;
}
} else if (valid_lft) {
- int flags = RTF_ADDRCONF | RTF_PREFIX_RT;
clock_t expires = 0;
- if (~rt_expires) {
+ int flags = RTF_ADDRCONF | RTF_PREFIX_RT;
+ if (addrconf_finite_timeout(rt_expires)) {
/* not infinity */
flags |= RTF_EXPIRES;
expires = jiffies_to_clock_t(rt_expires);
@@ -2027,7 +2026,7 @@
* Manual configuration of address on an interface
*/
static int inet6_addr_add(struct net *net, int ifindex, struct in6_addr *pfx,
- int plen, __u8 ifa_flags, __u32 prefered_lft,
+ unsigned int plen, __u8 ifa_flags, __u32 prefered_lft,
__u32 valid_lft)
{
struct inet6_ifaddr *ifp;
@@ -2036,9 +2035,13 @@
int scope;
u32 flags;
clock_t expires;
+ unsigned long timeout;
ASSERT_RTNL();
+ if (plen > 128)
+ return -EINVAL;
+
/* check the lifetime */
if (!valid_lft || prefered_lft > valid_lft)
return -EINVAL;
@@ -2052,22 +2055,23 @@
scope = ipv6_addr_scope(pfx);
- if (valid_lft == INFINITY_LIFE_TIME) {
- ifa_flags |= IFA_F_PERMANENT;
- flags = 0;
- expires = 0;
- } else {
- if (valid_lft >= 0x7FFFFFFF/HZ)
- valid_lft = 0x7FFFFFFF/HZ;
+ timeout = addrconf_timeout_fixup(valid_lft, HZ);
+ if (addrconf_finite_timeout(timeout)) {
+ expires = jiffies_to_clock_t(timeout * HZ);
+ valid_lft = timeout;
flags = RTF_EXPIRES;
- expires = jiffies_to_clock_t(valid_lft * HZ);
+ } else {
+ expires = 0;
+ flags = 0;
+ ifa_flags |= IFA_F_PERMANENT;
}
- if (prefered_lft == 0)
- ifa_flags |= IFA_F_DEPRECATED;
- else if ((prefered_lft >= 0x7FFFFFFF/HZ) &&
- (prefered_lft != INFINITY_LIFE_TIME))
- prefered_lft = 0x7FFFFFFF/HZ;
+ timeout = addrconf_timeout_fixup(prefered_lft, HZ);
+ if (addrconf_finite_timeout(timeout)) {
+ if (timeout == 0)
+ ifa_flags |= IFA_F_DEPRECATED;
+ prefered_lft = timeout;
+ }
ifp = ipv6_add_addr(idev, pfx, plen, scope, ifa_flags);
@@ -2095,12 +2099,15 @@
}
static int inet6_addr_del(struct net *net, int ifindex, struct in6_addr *pfx,
- int plen)
+ unsigned int plen)
{
struct inet6_ifaddr *ifp;
struct inet6_dev *idev;
struct net_device *dev;
+ if (plen > 128)
+ return -EINVAL;
+
dev = __dev_get_by_index(net, ifindex);
if (!dev)
return -ENODEV;
@@ -3169,26 +3176,28 @@
{
u32 flags;
clock_t expires;
+ unsigned long timeout;
if (!valid_lft || (prefered_lft > valid_lft))
return -EINVAL;
- if (valid_lft == INFINITY_LIFE_TIME) {
- ifa_flags |= IFA_F_PERMANENT;
- flags = 0;
- expires = 0;
- } else {
- if (valid_lft >= 0x7FFFFFFF/HZ)
- valid_lft = 0x7FFFFFFF/HZ;
+ timeout = addrconf_timeout_fixup(valid_lft, HZ);
+ if (addrconf_finite_timeout(timeout)) {
+ expires = jiffies_to_clock_t(timeout * HZ);
+ valid_lft = timeout;
flags = RTF_EXPIRES;
- expires = jiffies_to_clock_t(valid_lft * HZ);
+ } else {
+ expires = 0;
+ flags = 0;
+ ifa_flags |= IFA_F_PERMANENT;
}
- if (prefered_lft == 0)
- ifa_flags |= IFA_F_DEPRECATED;
- else if ((prefered_lft >= 0x7FFFFFFF/HZ) &&
- (prefered_lft != INFINITY_LIFE_TIME))
- prefered_lft = 0x7FFFFFFF/HZ;
+ timeout = addrconf_timeout_fixup(prefered_lft, HZ);
+ if (addrconf_finite_timeout(timeout)) {
+ if (timeout == 0)
+ ifa_flags |= IFA_F_DEPRECATED;
+ prefered_lft = timeout;
+ }
spin_lock_bh(&ifp->lock);
ifp->flags = (ifp->flags & ~(IFA_F_DEPRECATED | IFA_F_PERMANENT | IFA_F_NODAD | IFA_F_HOMEADDRESS)) | ifa_flags;
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 3c6aafb..e84b3fd 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -191,7 +191,7 @@
np->mcast_hops = -1;
np->mc_loop = 1;
np->pmtudisc = IPV6_PMTUDISC_WANT;
- np->ipv6only = init_net.ipv6.sysctl.bindv6only;
+ np->ipv6only = net->ipv6.sysctl.bindv6only;
/* Init the ipv4 part of the socket since we can have sockets
* using v6 API for ipv4.
diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
index 94fa6ae..0f0f94a 100644
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -496,7 +496,8 @@
return 0;
}
-int datagram_send_ctl(struct msghdr *msg, struct flowi *fl,
+int datagram_send_ctl(struct net *net,
+ struct msghdr *msg, struct flowi *fl,
struct ipv6_txoptions *opt,
int *hlimit, int *tclass)
{
@@ -509,7 +510,6 @@
for (cmsg = CMSG_FIRSTHDR(msg); cmsg; cmsg = CMSG_NXTHDR(msg, cmsg)) {
int addr_type;
- struct net_device *dev = NULL;
if (!CMSG_OK(msg, cmsg)) {
err = -EINVAL;
@@ -522,6 +522,9 @@
switch (cmsg->cmsg_type) {
case IPV6_PKTINFO:
case IPV6_2292PKTINFO:
+ {
+ struct net_device *dev = NULL;
+
if (cmsg->cmsg_len < CMSG_LEN(sizeof(struct in6_pktinfo))) {
err = -EINVAL;
goto exit_f;
@@ -535,32 +538,32 @@
fl->oif = src_info->ipi6_ifindex;
}
- addr_type = ipv6_addr_type(&src_info->ipi6_addr);
+ addr_type = __ipv6_addr_type(&src_info->ipi6_addr);
- if (addr_type == IPV6_ADDR_ANY)
- break;
+ if (fl->oif) {
+ dev = dev_get_by_index(net, fl->oif);
+ if (!dev)
+ return -ENODEV;
+ } else if (addr_type & IPV6_ADDR_LINKLOCAL)
+ return -EINVAL;
- if (addr_type & IPV6_ADDR_LINKLOCAL) {
- if (!src_info->ipi6_ifindex)
- return -EINVAL;
- else {
- dev = dev_get_by_index(&init_net, src_info->ipi6_ifindex);
- if (!dev)
- return -ENODEV;
- }
+ if (addr_type != IPV6_ADDR_ANY) {
+ int strict = __ipv6_addr_src_scope(addr_type) <= IPV6_ADDR_SCOPE_LINKLOCAL;
+ if (!ipv6_chk_addr(net, &src_info->ipi6_addr,
+ strict ? dev : NULL, 0))
+ err = -EINVAL;
+ else
+ ipv6_addr_copy(&fl->fl6_src, &src_info->ipi6_addr);
}
- if (!ipv6_chk_addr(&init_net, &src_info->ipi6_addr,
- dev, 0)) {
- if (dev)
- dev_put(dev);
- err = -EINVAL;
- goto exit_f;
- }
+
if (dev)
dev_put(dev);
- ipv6_addr_copy(&fl->fl6_src, &src_info->ipi6_addr);
+ if (err)
+ goto exit_f;
+
break;
+ }
case IPV6_FLOWINFO:
if (cmsg->cmsg_len < CMSG_LEN(4)) {
@@ -702,6 +705,11 @@
}
*hlimit = *(int *)CMSG_DATA(cmsg);
+ if (*hlimit < -1 || *hlimit > 0xff) {
+ err = -EINVAL;
+ goto exit_f;
+ }
+
break;
case IPV6_TCLASS:
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index 3cd1c99..dcf94fd 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -445,7 +445,7 @@
kfree_skb(skb);
return -1;
}
- if (!ipv6_chk_home_addr(&init_net, addr)) {
+ if (!ipv6_chk_home_addr(dev_net(skb->dst->dev), addr)) {
IP6_INC_STATS_BH(ip6_dst_idev(skb->dst),
IPSTATS_MIB_INADDRERRORS);
kfree_skb(skb);
diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c
index eb7a9403..37a4e77 100644
--- a/net/ipv6/ip6_flowlabel.c
+++ b/net/ipv6/ip6_flowlabel.c
@@ -354,7 +354,7 @@
msg.msg_control = (void*)(fl->opt+1);
flowi.oif = 0;
- err = datagram_send_ctl(&msg, &flowi, fl->opt, &junk, &junk);
+ err = datagram_send_ctl(net, &msg, &flowi, fl->opt, &junk, &junk);
if (err)
goto done;
err = -EINVAL;
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index 4e5c861..17eb48b 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -102,6 +102,15 @@
if (hdr->version != 6)
goto err;
+ /*
+ * RFC4291 2.5.3
+ * A packet received on an interface with a destination address
+ * of loopback must be dropped.
+ */
+ if (!(dev->flags & IFF_LOOPBACK) &&
+ ipv6_addr_loopback(&hdr->daddr))
+ goto err;
+
skb->transport_header = skb->network_header + sizeof(*hdr);
IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 2de3c46..1479618 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -197,7 +197,7 @@
const char *name = vif->dev ? vif->dev->name : "none";
seq_printf(seq,
- "%2Zd %-10s %8ld %7ld %8ld %7ld %05X\n",
+ "%2td %-10s %8ld %7ld %8ld %7ld %05X\n",
vif - vif6_table,
name, vif->bytes_in, vif->pkt_in,
vif->bytes_out, vif->pkt_out,
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index 56d55fe..86e28a7 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -67,7 +67,7 @@
/* RA packet may be delivered ONLY to IPPROTO_RAW socket */
if (sk->sk_type != SOCK_RAW || inet_sk(sk)->num != IPPROTO_RAW)
- return -EINVAL;
+ return -ENOPROTOOPT;
new_ra = (sel>=0) ? kmalloc(sizeof(*new_ra), GFP_KERNEL) : NULL;
@@ -161,9 +161,17 @@
struct ipv6_txoptions *opt;
struct sk_buff *pktopt;
- if (sk->sk_protocol != IPPROTO_UDP &&
- sk->sk_protocol != IPPROTO_UDPLITE &&
- sk->sk_protocol != IPPROTO_TCP)
+ if (sk->sk_type == SOCK_RAW)
+ break;
+
+ if (sk->sk_protocol == IPPROTO_UDP ||
+ sk->sk_protocol == IPPROTO_UDPLITE) {
+ struct udp_sock *up = udp_sk(sk);
+ if (up->pending == AF_INET6) {
+ retv = -EBUSY;
+ break;
+ }
+ } else if (sk->sk_protocol != IPPROTO_TCP)
break;
if (sk->sk_state != TCP_ESTABLISHED) {
@@ -337,18 +345,21 @@
case IPV6_DSTOPTS:
{
struct ipv6_txoptions *opt;
+
+ /* remove any sticky options header with a zero option
+ * length, per RFC3542.
+ */
if (optlen == 0)
optval = NULL;
+ else if (optlen < sizeof(struct ipv6_opt_hdr) ||
+ optlen & 0x7 || optlen > 8 * 255)
+ goto e_inval;
/* hop-by-hop / destination options are privileged option */
retv = -EPERM;
if (optname != IPV6_RTHDR && !capable(CAP_NET_RAW))
break;
- if (optlen < sizeof(struct ipv6_opt_hdr) ||
- optlen & 0x7 || optlen > 8 * 255)
- goto e_inval;
-
opt = ipv6_renew_options(sk, np->opt, optname,
(struct ipv6_opt_hdr __user *)optval,
optlen);
@@ -416,7 +427,7 @@
msg.msg_controllen = optlen;
msg.msg_control = (void*)(opt+1);
- retv = datagram_send_ctl(&msg, &fl, opt, &junk, &junk);
+ retv = datagram_send_ctl(net, &msg, &fl, opt, &junk, &junk);
if (retv)
goto done;
update:
@@ -438,7 +449,7 @@
case IPV6_MULTICAST_HOPS:
if (sk->sk_type == SOCK_STREAM)
- goto e_inval;
+ break;
if (optlen < sizeof(int))
goto e_inval;
if (val > 255 || val < -1)
@@ -450,13 +461,15 @@
case IPV6_MULTICAST_LOOP:
if (optlen < sizeof(int))
goto e_inval;
+ if (val != valbool)
+ goto e_inval;
np->mc_loop = valbool;
retv = 0;
break;
case IPV6_MULTICAST_IF:
if (sk->sk_type == SOCK_STREAM)
- goto e_inval;
+ break;
if (optlen < sizeof(int))
goto e_inval;
@@ -832,7 +845,7 @@
len = min_t(unsigned int, len, ipv6_optlen(hdr));
if (copy_to_user(optval, hdr, len))
return -EFAULT;
- return ipv6_optlen(hdr);
+ return len;
}
static int do_ipv6_getsockopt(struct sock *sk, int level, int optname,
@@ -852,7 +865,7 @@
if (sk->sk_protocol != IPPROTO_UDP &&
sk->sk_protocol != IPPROTO_UDPLITE &&
sk->sk_protocol != IPPROTO_TCP)
- return -EINVAL;
+ return -ENOPROTOOPT;
if (sk->sk_state != TCP_ESTABLISHED)
return -ENOTCONN;
val = sk->sk_family;
@@ -866,6 +879,8 @@
return -EINVAL;
if (copy_from_user(&gsf, optval, GROUP_FILTER_SIZE(0)))
return -EFAULT;
+ if (gsf.gf_group.ss_family != AF_INET6)
+ return -EADDRNOTAVAIL;
lock_sock(sk);
err = ip6_mc_msfget(sk, &gsf,
(struct group_filter __user *)optval, optlen);
@@ -975,6 +990,9 @@
len = ipv6_getsockopt_sticky(sk, np->opt,
optname, optval, len);
release_sock(sk);
+ /* check if ipv6_getsockopt_sticky() returns err code */
+ if (len < 0)
+ return len;
return put_user(len, optlen);
}
diff --git a/net/ipv6/netfilter/ip6table_mangle.c b/net/ipv6/netfilter/ip6table_mangle.c
index 27a5e8b..f405cea 100644
--- a/net/ipv6/netfilter/ip6table_mangle.c
+++ b/net/ipv6/netfilter/ip6table_mangle.c
@@ -129,7 +129,7 @@
.priority = NF_IP6_PRI_MANGLE,
},
{
- .hook = ip6t_local_hook,
+ .hook = ip6t_route_hook,
.owner = THIS_MODULE,
.pf = PF_INET6,
.hooknum = NF_INET_LOCAL_IN,
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index 2dccad4..cf20bc4 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -207,9 +207,12 @@
arg.id = id;
arg.src = src;
arg.dst = dst;
+
+ read_lock_bh(&nf_frags.lock);
hash = ip6qhashfn(id, src, dst);
q = inet_frag_find(&nf_init_frags, &nf_frags, &arg, hash);
+ local_bh_enable();
if (q == NULL)
goto oom;
@@ -638,10 +641,10 @@
goto ret_orig;
}
- spin_lock(&fq->q.lock);
+ spin_lock_bh(&fq->q.lock);
if (nf_ct_frag6_queue(fq, clone, fhdr, nhoff) < 0) {
- spin_unlock(&fq->q.lock);
+ spin_unlock_bh(&fq->q.lock);
pr_debug("Can't insert skb to queue\n");
fq_put(fq);
goto ret_orig;
@@ -653,7 +656,7 @@
if (ret_skb == NULL)
pr_debug("Can't reassemble fragmented packets\n");
}
- spin_unlock(&fq->q.lock);
+ spin_unlock_bh(&fq->q.lock);
fq_put(fq);
return ret_skb;
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 232e0dc..3aee123 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -813,7 +813,7 @@
memset(opt, 0, sizeof(struct ipv6_txoptions));
opt->tot_len = sizeof(struct ipv6_txoptions);
- err = datagram_send_ctl(msg, &fl, opt, &hlimit, &tclass);
+ err = datagram_send_ctl(sock_net(sk), msg, &fl, opt, &hlimit, &tclass);
if (err < 0) {
fl6_sock_release(flowlabel);
return err;
@@ -1164,6 +1164,15 @@
sk_common_release(sk);
}
+static int raw6_destroy(struct sock *sk)
+{
+ lock_sock(sk);
+ ip6_flush_pending_frames(sk);
+ release_sock(sk);
+
+ return inet6_destroy_sock(sk);
+}
+
static int rawv6_init_sk(struct sock *sk)
{
struct raw6_sock *rp = raw6_sk(sk);
@@ -1187,11 +1196,11 @@
.name = "RAWv6",
.owner = THIS_MODULE,
.close = rawv6_close,
+ .destroy = raw6_destroy,
.connect = ip6_datagram_connect,
.disconnect = udp_disconnect,
.ioctl = rawv6_ioctl,
.init = rawv6_init_sk,
- .destroy = inet6_destroy_sock,
.setsockopt = rawv6_setsockopt,
.getsockopt = rawv6_getsockopt,
.sendmsg = rawv6_sendmsg,
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index 798cabc..a60d7d1 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -247,6 +247,8 @@
arg.id = id;
arg.src = src;
arg.dst = dst;
+
+ read_lock(&ip6_frags.lock);
hash = ip6qhashfn(id, src, dst);
q = inet_frag_find(&net->ipv6.frags, &ip6_frags, &arg, hash);
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 48534c6..7ff6870 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -240,7 +240,7 @@
static inline struct rt6_info *rt6_device_match(struct net *net,
struct rt6_info *rt,
int oif,
- int strict)
+ int flags)
{
struct rt6_info *local = NULL;
struct rt6_info *sprt;
@@ -253,7 +253,7 @@
if (dev->flags & IFF_LOOPBACK) {
if (sprt->rt6i_idev == NULL ||
sprt->rt6i_idev->dev->ifindex != oif) {
- if (strict && oif)
+ if (flags & RT6_LOOKUP_F_IFACE && oif)
continue;
if (local && (!oif ||
local->rt6i_idev->dev->ifindex == oif))
@@ -266,7 +266,7 @@
if (local)
return local;
- if (strict)
+ if (flags & RT6_LOOKUP_F_IFACE)
return net->ipv6.ip6_null_entry;
}
return rt;
@@ -446,7 +446,7 @@
struct route_info *rinfo = (struct route_info *) opt;
struct in6_addr prefix_buf, *prefix;
unsigned int pref;
- u32 lifetime;
+ unsigned long lifetime;
struct rt6_info *rt;
if (len < sizeof(struct route_info)) {
@@ -472,13 +472,7 @@
if (pref == ICMPV6_ROUTER_PREF_INVALID)
pref = ICMPV6_ROUTER_PREF_MEDIUM;
- lifetime = ntohl(rinfo->lifetime);
- if (lifetime == 0xffffffff) {
- /* infinity */
- } else if (lifetime > 0x7fffffff/HZ - 1) {
- /* Avoid arithmetic overflow */
- lifetime = 0x7fffffff/HZ - 1;
- }
+ lifetime = addrconf_timeout_fixup(ntohl(rinfo->lifetime), HZ);
if (rinfo->length == 3)
prefix = (struct in6_addr *)rinfo->prefix;
@@ -506,7 +500,7 @@
(rt->rt6i_flags & ~RTF_PREF_MASK) | RTF_PREF(pref);
if (rt) {
- if (lifetime == 0xffffffff) {
+ if (!addrconf_finite_timeout(lifetime)) {
rt->rt6i_flags &= ~RTF_EXPIRES;
} else {
rt->rt6i_expires = jiffies + HZ * lifetime;
@@ -2202,8 +2196,12 @@
NLA_PUT_U32(skb, RTA_PRIORITY, rt->rt6i_metric);
- expires = (rt->rt6i_flags & RTF_EXPIRES) ?
- rt->rt6i_expires - jiffies : 0;
+ if (!(rt->rt6i_flags & RTF_EXPIRES))
+ expires = 0;
+ else if (rt->rt6i_expires - jiffies < INT_MAX)
+ expires = rt->rt6i_expires - jiffies;
+ else
+ expires = INT_MAX;
if (rtnl_put_cacheinfo(skb, &rt->u.dst, 0, 0, 0,
expires, rt->u.dst.error) < 0)
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 3de6ffd..32e871a 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -222,15 +222,18 @@
}
-static int ipip6_tunnel_get_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a)
+static int ipip6_tunnel_get_prl(struct ip_tunnel *t,
+ struct ip_tunnel_prl __user *a)
{
- struct ip_tunnel_prl *kp;
+ struct ip_tunnel_prl kprl, *kp;
struct ip_tunnel_prl_entry *prl;
unsigned int cmax, c = 0, ca, len;
int ret = 0;
- cmax = a->datalen / sizeof(*a);
- if (cmax > 1 && a->addr != htonl(INADDR_ANY))
+ if (copy_from_user(&kprl, a, sizeof(kprl)))
+ return -EFAULT;
+ cmax = kprl.datalen / sizeof(kprl);
+ if (cmax > 1 && kprl.addr != htonl(INADDR_ANY))
cmax = 1;
/* For simple GET or for root users,
@@ -261,26 +264,25 @@
for (prl = t->prl; prl; prl = prl->next) {
if (c > cmax)
break;
- if (a->addr != htonl(INADDR_ANY) && prl->addr != a->addr)
+ if (kprl.addr != htonl(INADDR_ANY) && prl->addr != kprl.addr)
continue;
kp[c].addr = prl->addr;
kp[c].flags = prl->flags;
c++;
- if (a->addr != htonl(INADDR_ANY))
+ if (kprl.addr != htonl(INADDR_ANY))
break;
}
out:
read_unlock(&ipip6_lock);
len = sizeof(*kp) * c;
- ret = len ? copy_to_user(a->data, kp, len) : 0;
+ ret = 0;
+ if ((len && copy_to_user(a + 1, kp, len)) || put_user(len, &a->datalen))
+ ret = -EFAULT;
kfree(kp);
- if (ret)
- return -EFAULT;
- a->datalen = len;
- return 0;
+ return ret;
}
static int
@@ -873,11 +875,20 @@
break;
case SIOCGETPRL:
+ err = -EINVAL;
+ if (dev == sitn->fb_tunnel_dev)
+ goto done;
+ err = -ENOENT;
+ if (!(t = netdev_priv(dev)))
+ goto done;
+ err = ipip6_tunnel_get_prl(t, ifr->ifr_ifru.ifru_data);
+ break;
+
case SIOCADDPRL:
case SIOCDELPRL:
case SIOCCHGPRL:
err = -EPERM;
- if (cmd != SIOCGETPRL && !capable(CAP_NET_ADMIN))
+ if (!capable(CAP_NET_ADMIN))
goto done;
err = -EINVAL;
if (dev == sitn->fb_tunnel_dev)
@@ -890,12 +901,6 @@
goto done;
switch (cmd) {
- case SIOCGETPRL:
- err = ipip6_tunnel_get_prl(t, &prl);
- if (!err && copy_to_user(ifr->ifr_ifru.ifru_data,
- &prl, sizeof(prl)))
- err = -EFAULT;
- break;
case SIOCDELPRL:
err = ipip6_tunnel_del_prl(t, &prl);
break;
@@ -904,8 +909,7 @@
err = ipip6_tunnel_add_prl(t, &prl, cmd == SIOCCHGPRL);
break;
}
- if (cmd != SIOCGETPRL)
- netdev_state_change(dev);
+ netdev_state_change(dev);
break;
default:
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index 938ce4e..3ecc115 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -198,7 +198,6 @@
ireq = inet_rsk(req);
ireq6 = inet6_rsk(req);
treq = tcp_rsk(req);
- ireq6->pktopts = NULL;
if (security_inet_conn_request(sk, skb, req)) {
reqsk_free(req);
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 715965f..40ea9c3 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1299,7 +1299,6 @@
treq = inet6_rsk(req);
ipv6_addr_copy(&treq->rmt_addr, &ipv6_hdr(skb)->saddr);
ipv6_addr_copy(&treq->loc_addr, &ipv6_hdr(skb)->daddr);
- treq->pktopts = NULL;
if (!want_cookie)
TCP_ECN_create_request(req, tcp_hdr(skb));
@@ -2037,7 +2036,7 @@
seq_printf(seq,
"%4d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X "
- "%02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %u %u %u %u %d\n",
+ "%02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %lu %lu %u %u %d\n",
i,
src->s6_addr32[0], src->s6_addr32[1],
src->s6_addr32[2], src->s6_addr32[3], srcp,
@@ -2053,8 +2052,8 @@
icsk->icsk_probes_out,
sock_i_ino(sp),
atomic_read(&sp->sk_refcnt), sp,
- icsk->icsk_rto,
- icsk->icsk_ack.ato,
+ jiffies_to_clock_t(icsk->icsk_rto),
+ jiffies_to_clock_t(icsk->icsk_ack.ato),
(icsk->icsk_ack.quick << 1 ) | icsk->icsk_ack.pingpong,
tp->snd_cwnd, tp->snd_ssthresh>=0xFFFF?-1:tp->snd_ssthresh
);
diff --git a/net/ipv6/tunnel6.c b/net/ipv6/tunnel6.c
index 6323921..669f280 100644
--- a/net/ipv6/tunnel6.c
+++ b/net/ipv6/tunnel6.c
@@ -109,7 +109,7 @@
{
struct xfrm6_tunnel *handler;
- if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
+ if (!pskb_may_pull(skb, sizeof(struct iphdr)))
goto drop;
for (handler = tunnel46_handlers; handler; handler = handler->next)
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 1fd784f..dd30962 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -534,7 +534,9 @@
{
struct udp_sock *up = udp_sk(sk);
- if (up->pending) {
+ if (up->pending == AF_INET)
+ udp_flush_pending_frames(sk);
+ else if (up->pending) {
up->len = 0;
up->pending = 0;
ip6_flush_pending_frames(sk);
@@ -731,7 +733,7 @@
memset(opt, 0, sizeof(struct ipv6_txoptions));
opt->tot_len = sizeof(*opt);
- err = datagram_send_ctl(msg, &fl, opt, &hlimit, &tclass);
+ err = datagram_send_ctl(sock_net(sk), msg, &fl, opt, &hlimit, &tclass);
if (err < 0) {
fl6_sock_release(flowlabel);
return err;
@@ -848,12 +850,14 @@
} else {
dst_release(dst);
}
+ dst = NULL;
}
if (err > 0)
err = np->recverr ? net_xmit_errno(err) : 0;
release_sock(sk);
out:
+ dst_release(dst);
fl6_sock_release(flowlabel);
if (!err)
return len;
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index ae54b20..3eb5bcc 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -1093,11 +1093,6 @@
init_waitqueue_head(&self->query_wait);
- /* Initialise networking socket struct */
- sock_init_data(sock, sk); /* Note : set sk->sk_refcnt to 1 */
- sk->sk_family = PF_IRDA;
- sk->sk_protocol = protocol;
-
switch (sock->type) {
case SOCK_STREAM:
sock->ops = &irda_stream_ops;
@@ -1124,13 +1119,20 @@
self->max_sdu_size_rx = TTP_SAR_UNBOUND;
break;
default:
+ sk_free(sk);
return -ESOCKTNOSUPPORT;
}
break;
default:
+ sk_free(sk);
return -ESOCKTNOSUPPORT;
}
+ /* Initialise networking socket struct */
+ sock_init_data(sock, sk); /* Note : set sk->sk_refcnt to 1 */
+ sk->sk_family = PF_IRDA;
+ sk->sk_protocol = protocol;
+
/* Register as a client with IrLMP */
self->ckey = irlmp_register_client(0, NULL, NULL, NULL);
self->mask.word = 0xffff;
diff --git a/net/irda/irnetlink.c b/net/irda/irnetlink.c
index 9e1fb82..2f05ec1 100644
--- a/net/irda/irnetlink.c
+++ b/net/irda/irnetlink.c
@@ -101,8 +101,8 @@
hdr = genlmsg_put(msg, info->snd_pid, info->snd_seq,
&irda_nl_family, 0, IRDA_NL_CMD_GET_MODE);
- if (IS_ERR(hdr)) {
- ret = PTR_ERR(hdr);
+ if (hdr == NULL) {
+ ret = -EMSGSIZE;
goto err_out;
}
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 9bba7ac..7470e36 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -3030,6 +3030,9 @@
static int pfkey_send_notify(struct xfrm_state *x, struct km_event *c)
{
+ if (atomic_read(&pfkey_socks_nr) == 0)
+ return 0;
+
switch (c->event) {
case XFRM_MSG_EXPIRE:
return key_notify_sa_expire(x, c);
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index c7314bf..006486b 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -899,7 +899,7 @@
/* ieee80211_ioctl.c */
-int ieee80211_set_freq(struct ieee80211_local *local, int freq);
+int ieee80211_set_freq(struct net_device *dev, int freq);
/* ieee80211_sta.c */
void ieee80211_sta_timer(unsigned long data);
void ieee80211_sta_work(struct work_struct *work);
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index 150d66d..220e83b 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -380,6 +380,15 @@
if (!key)
return;
+ if (!key->sdata) {
+ /* The key has not been linked yet, simply free it
+ * and don't Oops */
+ if (key->conf.alg == ALG_CCMP)
+ ieee80211_aes_key_free(key->u.ccmp.tfm);
+ kfree(key);
+ return;
+ }
+
spin_lock_irqsave(&key->sdata->local->key_lock, flags);
__ieee80211_key_free(key);
spin_unlock_irqrestore(&key->sdata->local->key_lock, flags);
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 5c87645..df0836f 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -511,6 +511,7 @@
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS:
sdata->u.sta.state = IEEE80211_DISABLED;
+ memset(sdata->u.sta.bssid, 0, ETH_ALEN);
del_timer_sync(&sdata->u.sta.timer);
/*
* When we get here, the interface is marked down.
@@ -529,8 +530,6 @@
local->sta_hw_scanning = 0;
}
- flush_workqueue(local->hw.workqueue);
-
sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED;
kfree(sdata->u.sta.extra_ie);
sdata->u.sta.extra_ie = NULL;
@@ -554,6 +553,8 @@
ieee80211_led_radio(local, 0);
+ flush_workqueue(local->hw.workqueue);
+
tasklet_disable(&local->tx_pending_tasklet);
tasklet_disable(&local->tasklet);
}
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 841278f..b404537 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -44,7 +44,7 @@
#define IEEE80211_RETRY_AUTH_INTERVAL (1 * HZ)
#define IEEE80211_SCAN_INTERVAL (2 * HZ)
#define IEEE80211_SCAN_INTERVAL_SLOW (15 * HZ)
-#define IEEE80211_IBSS_JOIN_TIMEOUT (20 * HZ)
+#define IEEE80211_IBSS_JOIN_TIMEOUT (7 * HZ)
#define IEEE80211_PROBE_DELAY (HZ / 33)
#define IEEE80211_CHANNEL_TIME (HZ / 33)
@@ -547,15 +547,14 @@
sdata->bss_conf.ht_bss_conf = &conf->ht_bss_conf;
}
- netif_carrier_on(dev);
ifsta->flags |= IEEE80211_STA_PREV_BSSID_SET;
memcpy(ifsta->prev_bssid, sdata->u.sta.bssid, ETH_ALEN);
memcpy(wrqu.ap_addr.sa_data, sdata->u.sta.bssid, ETH_ALEN);
ieee80211_sta_send_associnfo(dev, ifsta);
} else {
+ netif_carrier_off(dev);
ieee80211_sta_tear_down_BA_sessions(dev, ifsta->bssid);
ifsta->flags &= ~IEEE80211_STA_ASSOCIATED;
- netif_carrier_off(dev);
ieee80211_reset_erp_info(dev);
sdata->bss_conf.assoc_ht = 0;
@@ -569,6 +568,10 @@
sdata->bss_conf.assoc = assoc;
ieee80211_bss_info_change_notify(sdata, changed);
+
+ if (assoc)
+ netif_carrier_on(dev);
+
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
}
@@ -2336,6 +2339,7 @@
u8 *pos;
struct ieee80211_sub_if_data *sdata;
struct ieee80211_supported_band *sband;
+ union iwreq_data wrqu;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
@@ -2358,13 +2362,10 @@
sdata->drop_unencrypted = bss->capability &
WLAN_CAPABILITY_PRIVACY ? 1 : 0;
- res = ieee80211_set_freq(local, bss->freq);
+ res = ieee80211_set_freq(dev, bss->freq);
- if (local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS) {
- printk(KERN_DEBUG "%s: IBSS not allowed on frequency "
- "%d MHz\n", dev->name, local->oper_channel->center_freq);
- return -1;
- }
+ if (res)
+ return res;
/* Set beacon template */
skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
@@ -2479,6 +2480,10 @@
ifsta->state = IEEE80211_IBSS_JOINED;
mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
+ memset(&wrqu, 0, sizeof(wrqu));
+ memcpy(wrqu.ap_addr.sa_data, bss->bssid, ETH_ALEN);
+ wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+
return res;
}
@@ -3486,7 +3491,7 @@
spin_unlock_bh(&local->sta_bss_lock);
if (selected) {
- ieee80211_set_freq(local, selected->freq);
+ ieee80211_set_freq(dev, selected->freq);
if (!(ifsta->flags & IEEE80211_STA_SSID_SET))
ieee80211_sta_set_ssid(dev, selected->ssid,
selected->ssid_len);
@@ -3609,8 +3614,10 @@
spin_unlock_bh(&local->sta_bss_lock);
#ifdef CONFIG_MAC80211_IBSS_DEBUG
- printk(KERN_DEBUG " sta_find_ibss: selected %s current "
- "%s\n", print_mac(mac, bssid), print_mac(mac2, ifsta->bssid));
+ if (found)
+ printk(KERN_DEBUG " sta_find_ibss: selected %s current "
+ "%s\n", print_mac(mac, bssid),
+ print_mac(mac2, ifsta->bssid));
#endif /* CONFIG_MAC80211_IBSS_DEBUG */
if (found && memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0 &&
(bss = ieee80211_rx_bss_get(dev, bssid,
diff --git a/net/mac80211/rc80211_pid.h b/net/mac80211/rc80211_pid.h
index 04afc13..4ea7b97 100644
--- a/net/mac80211/rc80211_pid.h
+++ b/net/mac80211/rc80211_pid.h
@@ -141,7 +141,6 @@
* rate behaviour values (lower means we should trust more what we learnt
* about behaviour of rates, higher means we should trust more the natural
* ordering of rates)
- * @fast_start: if Y, push high rates right after initialization
*/
struct rc_pid_debugfs_entries {
struct dentry *dir;
@@ -154,7 +153,6 @@
struct dentry *sharpen_factor;
struct dentry *sharpen_duration;
struct dentry *norm_offset;
- struct dentry *fast_start;
};
void rate_control_pid_event_tx_status(struct rc_pid_event_buffer *buf,
@@ -267,9 +265,6 @@
/* Normalization offset. */
unsigned int norm_offset;
- /* Fast starst parameter. */
- unsigned int fast_start;
-
/* Rates information. */
struct rc_pid_rateinfo *rinfo;
diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c
index a849b74..bcd27c1d 100644
--- a/net/mac80211/rc80211_pid_algo.c
+++ b/net/mac80211/rc80211_pid_algo.c
@@ -398,13 +398,25 @@
return NULL;
}
+ pinfo->target = RC_PID_TARGET_PF;
+ pinfo->sampling_period = RC_PID_INTERVAL;
+ pinfo->coeff_p = RC_PID_COEFF_P;
+ pinfo->coeff_i = RC_PID_COEFF_I;
+ pinfo->coeff_d = RC_PID_COEFF_D;
+ pinfo->smoothing_shift = RC_PID_SMOOTHING_SHIFT;
+ pinfo->sharpen_factor = RC_PID_SHARPENING_FACTOR;
+ pinfo->sharpen_duration = RC_PID_SHARPENING_DURATION;
+ pinfo->norm_offset = RC_PID_NORM_OFFSET;
+ pinfo->rinfo = rinfo;
+ pinfo->oldrate = 0;
+
/* Sort the rates. This is optimized for the most common case (i.e.
* almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed
* mapping too. */
for (i = 0; i < sband->n_bitrates; i++) {
rinfo[i].index = i;
rinfo[i].rev_index = i;
- if (pinfo->fast_start)
+ if (RC_PID_FAST_START)
rinfo[i].diff = 0;
else
rinfo[i].diff = i * pinfo->norm_offset;
@@ -425,19 +437,6 @@
break;
}
- pinfo->target = RC_PID_TARGET_PF;
- pinfo->sampling_period = RC_PID_INTERVAL;
- pinfo->coeff_p = RC_PID_COEFF_P;
- pinfo->coeff_i = RC_PID_COEFF_I;
- pinfo->coeff_d = RC_PID_COEFF_D;
- pinfo->smoothing_shift = RC_PID_SMOOTHING_SHIFT;
- pinfo->sharpen_factor = RC_PID_SHARPENING_FACTOR;
- pinfo->sharpen_duration = RC_PID_SHARPENING_DURATION;
- pinfo->norm_offset = RC_PID_NORM_OFFSET;
- pinfo->fast_start = RC_PID_FAST_START;
- pinfo->rinfo = rinfo;
- pinfo->oldrate = 0;
-
#ifdef CONFIG_MAC80211_DEBUGFS
de = &pinfo->dentries;
de->dir = debugfs_create_dir("rc80211_pid",
@@ -465,9 +464,6 @@
de->norm_offset = debugfs_create_u32("norm_offset",
S_IRUSR | S_IWUSR, de->dir,
&pinfo->norm_offset);
- de->fast_start = debugfs_create_bool("fast_start",
- S_IRUSR | S_IWUSR, de->dir,
- &pinfo->fast_start);
#endif
return pinfo;
@@ -479,7 +475,6 @@
#ifdef CONFIG_MAC80211_DEBUGFS
struct rc_pid_debugfs_entries *de = &pinfo->dentries;
- debugfs_remove(de->fast_start);
debugfs_remove(de->norm_offset);
debugfs_remove(de->sharpen_duration);
debugfs_remove(de->sharpen_factor);
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 1d7dd54..c80d589 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1132,7 +1132,7 @@
ieee80211_tx_handler *handler;
struct ieee80211_tx_data tx;
ieee80211_tx_result res = TX_DROP, res_prepare;
- int ret, i;
+ int ret, i, retries = 0;
WARN_ON(__ieee80211_queue_pending(local, control->queue));
@@ -1216,6 +1216,13 @@
if (!__ieee80211_queue_stopped(local, control->queue)) {
clear_bit(IEEE80211_LINK_STATE_PENDING,
&local->state[control->queue]);
+ retries++;
+ /*
+ * Driver bug, it's rejecting packets but
+ * not stopping queues.
+ */
+ if (WARN_ON_ONCE(retries > 5))
+ goto drop;
goto retry;
}
memcpy(&store->control, control,
@@ -1562,13 +1569,13 @@
* be cloned. This could happen, e.g., with Linux bridge code passing
* us broadcast frames. */
- if (head_need > 0 || skb_header_cloned(skb)) {
+ if (head_need > 0 || skb_cloned(skb)) {
#if 0
printk(KERN_DEBUG "%s: need to reallocate buffer for %d bytes "
"of headroom\n", dev->name, head_need);
#endif
- if (skb_header_cloned(skb))
+ if (skb_cloned(skb))
I802_DEBUG_INC(local->tx_expand_skb_head_cloned);
else
I802_DEBUG_INC(local->tx_expand_skb_head);
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index 8311bb2..e840421 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -95,6 +95,13 @@
}
}
+ if (alg == ALG_WEP &&
+ key_len != LEN_WEP40 && key_len != LEN_WEP104) {
+ ieee80211_key_free(key);
+ err = -EINVAL;
+ goto out_unlock;
+ }
+
ieee80211_key_link(key, sdata, sta);
if (set_tx_key || (!sta && !sdata->default_key && key))
@@ -290,14 +297,22 @@
return 0;
}
-int ieee80211_set_freq(struct ieee80211_local *local, int freqMHz)
+int ieee80211_set_freq(struct net_device *dev, int freqMHz)
{
int ret = -EINVAL;
struct ieee80211_channel *chan;
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
chan = ieee80211_get_channel(local->hw.wiphy, freqMHz);
if (chan && !(chan->flags & IEEE80211_CHAN_DISABLED)) {
+ if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS &&
+ chan->flags & IEEE80211_CHAN_NO_IBSS) {
+ printk(KERN_DEBUG "%s: IBSS not allowed on frequency "
+ "%d MHz\n", dev->name, chan->center_freq);
+ return ret;
+ }
local->oper_channel = chan;
if (local->sta_sw_scanning || local->sta_hw_scanning)
@@ -315,7 +330,6 @@
struct iw_request_info *info,
struct iw_freq *freq, char *extra)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type == IEEE80211_IF_TYPE_STA)
@@ -329,14 +343,14 @@
IEEE80211_STA_AUTO_CHANNEL_SEL;
return 0;
} else
- return ieee80211_set_freq(local,
+ return ieee80211_set_freq(dev,
ieee80211_channel_to_frequency(freq->m));
} else {
int i, div = 1000000;
for (i = 0; i < freq->e; i++)
div /= 10;
if (div > 0)
- return ieee80211_set_freq(local, freq->m / div);
+ return ieee80211_set_freq(dev, freq->m / div);
else
return -EINVAL;
}
@@ -489,7 +503,8 @@
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
- if (sdata->u.sta.state == IEEE80211_ASSOCIATED) {
+ if (sdata->u.sta.state == IEEE80211_ASSOCIATED ||
+ sdata->u.sta.state == IEEE80211_IBSS_JOINED) {
ap_addr->sa_family = ARPHRD_ETHER;
memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN);
return 0;
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index dc1598b8..5d09e86 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -323,8 +323,7 @@
struct ieee80211_hw *hw = &local->hw;
int queue;
- tcf_destroy_chain(q->filter_list);
- q->filter_list = NULL;
+ tcf_destroy_chain(&q->filter_list);
for (queue=0; queue < hw->queues; queue++) {
skb_queue_purge(&q->requeued[queue]);
@@ -673,7 +672,7 @@
#ifdef CONFIG_MAC80211_HT_DEBUG
if (net_ratelimit())
printk(KERN_DEBUG "allocated aggregation queue"
- " %d tid %d addr %s pool=0x%lX",
+ " %d tid %d addr %s pool=0x%lX\n",
i, tid, print_mac(mac, sta->addr),
q->qdisc_pool[0]);
#endif /* CONFIG_MAC80211_HT_DEBUG */
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index c4b1799..662c1cc 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -196,8 +196,6 @@
if (l4proto && l4proto->destroy)
l4proto->destroy(ct);
- nf_ct_ext_destroy(ct);
-
rcu_read_unlock();
spin_lock_bh(&nf_conntrack_lock);
@@ -520,6 +518,7 @@
void nf_conntrack_free(struct nf_conn *ct)
{
+ nf_ct_ext_destroy(ct);
call_rcu(&ct->rcu, nf_conntrack_free_rcu);
}
EXPORT_SYMBOL_GPL(nf_conntrack_free);
diff --git a/net/netfilter/nf_conntrack_extend.c b/net/netfilter/nf_conntrack_extend.c
index bcc19fa..8a3f8b3 100644
--- a/net/netfilter/nf_conntrack_extend.c
+++ b/net/netfilter/nf_conntrack_extend.c
@@ -59,12 +59,19 @@
if (!*ext)
return NULL;
+ INIT_RCU_HEAD(&(*ext)->rcu);
(*ext)->offset[id] = off;
(*ext)->len = len;
return (void *)(*ext) + off;
}
+static void __nf_ct_ext_free_rcu(struct rcu_head *head)
+{
+ struct nf_ct_ext *ext = container_of(head, struct nf_ct_ext, rcu);
+ kfree(ext);
+}
+
void *__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp)
{
struct nf_ct_ext *new;
@@ -106,7 +113,7 @@
(void *)ct->ext + ct->ext->offset[i]);
rcu_read_unlock();
}
- kfree(ct->ext);
+ call_rcu(&ct->ext->rcu, __nf_ct_ext_free_rcu);
ct->ext = new;
}
diff --git a/net/netfilter/nf_conntrack_h323_main.c b/net/netfilter/nf_conntrack_h323_main.c
index 95da1a2..2f83c15 100644
--- a/net/netfilter/nf_conntrack_h323_main.c
+++ b/net/netfilter/nf_conntrack_h323_main.c
@@ -619,6 +619,7 @@
static struct nf_conntrack_helper nf_conntrack_helper_h245 __read_mostly = {
.name = "H.245",
.me = THIS_MODULE,
+ .tuple.src.l3num = AF_UNSPEC,
.tuple.dst.protonum = IPPROTO_UDP,
.help = h245_help,
.expect_policy = &h245_exp_policy,
@@ -1765,6 +1766,7 @@
nf_conntrack_helper_unregister(&nf_conntrack_helper_ras[0]);
nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[1]);
nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[0]);
+ nf_conntrack_helper_unregister(&nf_conntrack_helper_h245);
kfree(h323_buffer);
pr_debug("nf_ct_h323: fini\n");
}
@@ -1777,28 +1779,34 @@
h323_buffer = kmalloc(65536, GFP_KERNEL);
if (!h323_buffer)
return -ENOMEM;
- ret = nf_conntrack_helper_register(&nf_conntrack_helper_q931[0]);
+ ret = nf_conntrack_helper_register(&nf_conntrack_helper_h245);
if (ret < 0)
goto err1;
- ret = nf_conntrack_helper_register(&nf_conntrack_helper_q931[1]);
+ ret = nf_conntrack_helper_register(&nf_conntrack_helper_q931[0]);
if (ret < 0)
goto err2;
- ret = nf_conntrack_helper_register(&nf_conntrack_helper_ras[0]);
+ ret = nf_conntrack_helper_register(&nf_conntrack_helper_q931[1]);
if (ret < 0)
goto err3;
- ret = nf_conntrack_helper_register(&nf_conntrack_helper_ras[1]);
+ ret = nf_conntrack_helper_register(&nf_conntrack_helper_ras[0]);
if (ret < 0)
goto err4;
+ ret = nf_conntrack_helper_register(&nf_conntrack_helper_ras[1]);
+ if (ret < 0)
+ goto err5;
pr_debug("nf_ct_h323: init success\n");
return 0;
-err4:
+err5:
nf_conntrack_helper_unregister(&nf_conntrack_helper_ras[0]);
-err3:
+err4:
nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[1]);
-err2:
+err3:
nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[0]);
+err2:
+ nf_conntrack_helper_unregister(&nf_conntrack_helper_h245);
err1:
+ kfree(h323_buffer);
return ret;
}
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index ba94004..dd28fb2 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -331,12 +331,13 @@
I. Upper bound for valid data: seq <= sender.td_maxend
II. Lower bound for valid data: seq + len >= sender.td_end - receiver.td_maxwin
- III. Upper bound for valid ack: sack <= receiver.td_end
- IV. Lower bound for valid ack: ack >= receiver.td_end - MAXACKWINDOW
+ III. Upper bound for valid (s)ack: sack <= receiver.td_end
+ IV. Lower bound for valid (s)ack: sack >= receiver.td_end - MAXACKWINDOW
- where sack is the highest right edge of sack block found in the packet.
+ where sack is the highest right edge of sack block found in the packet
+ or ack in the case of packet without SACK option.
- The upper bound limit for a valid ack is not ignored -
+ The upper bound limit for a valid (s)ack is not ignored -
we doesn't have to deal with fragments.
*/
@@ -606,12 +607,12 @@
before(seq, sender->td_maxend + 1),
after(end, sender->td_end - receiver->td_maxwin - 1),
before(sack, receiver->td_end + 1),
- after(ack, receiver->td_end - MAXACKWINDOW(sender)));
+ after(sack, receiver->td_end - MAXACKWINDOW(sender) - 1));
if (before(seq, sender->td_maxend + 1) &&
after(end, sender->td_end - receiver->td_maxwin - 1) &&
before(sack, receiver->td_end + 1) &&
- after(ack, receiver->td_end - MAXACKWINDOW(sender))) {
+ after(sack, receiver->td_end - MAXACKWINDOW(sender) - 1)) {
/*
* Take into account window scaling (RFC 1323).
*/
@@ -843,9 +844,15 @@
/* Attempt to reopen a closed/aborted connection.
* Delete this connection and look up again. */
write_unlock_bh(&tcp_lock);
- if (del_timer(&ct->timeout))
+ /* Only repeat if we can actually remove the timer.
+ * Destruction may already be in progress in process
+ * context and we must give it a chance to terminate.
+ */
+ if (del_timer(&ct->timeout)) {
ct->timeout.function((unsigned long)ct);
- return -NF_REPEAT;
+ return -NF_REPEAT;
+ }
+ return -NF_DROP;
}
/* Fall through */
case TCP_CONNTRACK_IGNORE:
diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c
index bc11d7092..9fda6ee 100644
--- a/net/netfilter/nf_log.c
+++ b/net/netfilter/nf_log.c
@@ -92,10 +92,6 @@
vsnprintf(prefix, sizeof(prefix), fmt, args);
va_end(args);
logger->logfn(pf, hooknum, skb, in, out, loginfo, prefix);
- } else if (net_ratelimit()) {
- printk(KERN_WARNING "nf_log_packet: can\'t log since "
- "no backend logging module loaded in! Please either "
- "load one, or disable logging explicitly\n");
}
rcu_read_unlock();
}
diff --git a/net/netfilter/xt_connlimit.c b/net/netfilter/xt_connlimit.c
index 2e89a00..70907f6b 100644
--- a/net/netfilter/xt_connlimit.c
+++ b/net/netfilter/xt_connlimit.c
@@ -73,7 +73,8 @@
static inline bool already_closed(const struct nf_conn *conn)
{
if (nf_ct_protonum(conn) == IPPROTO_TCP)
- return conn->proto.tcp.state == TCP_CONNTRACK_TIME_WAIT;
+ return conn->proto.tcp.state == TCP_CONNTRACK_TIME_WAIT ||
+ conn->proto.tcp.state == TCP_CONNTRACK_CLOSE;
else
return 0;
}
diff --git a/net/netlabel/netlabel_cipso_v4.c b/net/netlabel/netlabel_cipso_v4.c
index fdc14a0..9080c61 100644
--- a/net/netlabel/netlabel_cipso_v4.c
+++ b/net/netlabel/netlabel_cipso_v4.c
@@ -584,12 +584,7 @@
rcu_read_unlock();
genlmsg_end(ans_skb, data);
-
- ret_val = genlmsg_reply(ans_skb, info);
- if (ret_val != 0)
- goto list_failure;
-
- return 0;
+ return genlmsg_reply(ans_skb, info);
list_retry:
/* XXX - this limit is a guesstimate */
diff --git a/net/netlabel/netlabel_mgmt.c b/net/netlabel/netlabel_mgmt.c
index 22c1912..44be5d5 100644
--- a/net/netlabel/netlabel_mgmt.c
+++ b/net/netlabel/netlabel_mgmt.c
@@ -386,11 +386,7 @@
rcu_read_unlock();
genlmsg_end(ans_skb, data);
-
- ret_val = genlmsg_reply(ans_skb, info);
- if (ret_val != 0)
- goto listdef_failure;
- return 0;
+ return genlmsg_reply(ans_skb, info);
listdef_failure_lock:
rcu_read_unlock();
@@ -501,11 +497,7 @@
goto version_failure;
genlmsg_end(ans_skb, data);
-
- ret_val = genlmsg_reply(ans_skb, info);
- if (ret_val != 0)
- goto version_failure;
- return 0;
+ return genlmsg_reply(ans_skb, info);
version_failure:
kfree_skb(ans_skb);
diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c
index 0099da5b..56f8087 100644
--- a/net/netlabel/netlabel_unlabeled.c
+++ b/net/netlabel/netlabel_unlabeled.c
@@ -1107,11 +1107,7 @@
goto list_failure;
genlmsg_end(ans_skb, data);
-
- ret_val = genlmsg_reply(ans_skb, info);
- if (ret_val != 0)
- goto list_failure;
- return 0;
+ return genlmsg_reply(ans_skb, info);
list_failure:
kfree_skb(ans_skb);
@@ -1534,7 +1530,7 @@
}
}
list_for_each_entry_rcu(addr6, &iface->addr6_list, list) {
- if (addr6->valid || iter_addr6++ < skip_addr6)
+ if (!addr6->valid || iter_addr6++ < skip_addr6)
continue;
if (netlbl_unlabel_staticlist_gen(NLBL_UNLABEL_C_STATICLISTDEF,
iface,
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 9b97f80..349aba1 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -886,7 +886,7 @@
return netlink_unicast_kernel(sk, skb);
if (sk_filter(sk, skb)) {
- int err = skb->len;
+ err = skb->len;
kfree_skb(skb);
sock_put(sk);
return err;
diff --git a/net/netlink/attr.c b/net/netlink/attr.c
index feb326f..2d106cf 100644
--- a/net/netlink/attr.c
+++ b/net/netlink/attr.c
@@ -132,6 +132,7 @@
* @maxtype: maximum attribute type to be expected
* @head: head of attribute stream
* @len: length of attribute stream
+ * @policy: validation policy
*
* Parses a stream of attributes and stores a pointer to each attribute in
* the tb array accessable via the attribute type. Attributes with a type
@@ -194,7 +195,7 @@
/**
* nla_strlcpy - Copy string attribute payload into a sized buffer
* @dst: where to copy the string to
- * @src: attribute to copy the string from
+ * @nla: attribute to copy the string from
* @dstsize: size of destination buffer
*
* Copies at most dstsize - 1 bytes into the destination buffer.
@@ -340,9 +341,9 @@
}
/**
- * nla_reserve - reserve room for attribute without header
+ * nla_reserve_nohdr - reserve room for attribute without header
* @skb: socket buffer to reserve room on
- * @len: length of attribute payload
+ * @attrlen: length of attribute payload
*
* Reserves room for attribute payload without a header.
*
@@ -400,13 +401,13 @@
* @attrlen: length of attribute payload
* @data: head of attribute payload
*
- * Returns -1 if the tailroom of the skb is insufficient to store
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
* the attribute header and payload.
*/
int nla_put(struct sk_buff *skb, int attrtype, int attrlen, const void *data)
{
if (unlikely(skb_tailroom(skb) < nla_total_size(attrlen)))
- return -1;
+ return -EMSGSIZE;
__nla_put(skb, attrtype, attrlen, data);
return 0;
@@ -418,13 +419,13 @@
* @attrlen: length of attribute payload
* @data: head of attribute payload
*
- * Returns -1 if the tailroom of the skb is insufficient to store
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
* the attribute payload.
*/
int nla_put_nohdr(struct sk_buff *skb, int attrlen, const void *data)
{
if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen)))
- return -1;
+ return -EMSGSIZE;
__nla_put_nohdr(skb, attrlen, data);
return 0;
@@ -436,13 +437,13 @@
* @attrlen: length of attribute payload
* @data: head of attribute payload
*
- * Returns -1 if the tailroom of the skb is insufficient to store
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
* the attribute payload.
*/
int nla_append(struct sk_buff *skb, int attrlen, const void *data)
{
if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen)))
- return -1;
+ return -EMSGSIZE;
memcpy(skb_put(skb, attrlen), data, attrlen);
return 0;
diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c
index d16929c..3e1191c 100644
--- a/net/netlink/genetlink.c
+++ b/net/netlink/genetlink.c
@@ -444,8 +444,11 @@
if (ops->dumpit == NULL)
return -EOPNOTSUPP;
- return netlink_dump_start(genl_sock, skb, nlh,
- ops->dumpit, ops->done);
+ genl_unlock();
+ err = netlink_dump_start(genl_sock, skb, nlh,
+ ops->dumpit, ops->done);
+ genl_lock();
+ return err;
}
if (ops->doit == NULL)
@@ -554,7 +557,8 @@
return genlmsg_end(skb, hdr);
nla_put_failure:
- return genlmsg_cancel(skb, hdr);
+ genlmsg_cancel(skb, hdr);
+ return -EMSGSIZE;
}
static int ctrl_fill_mcgrp_info(struct genl_multicast_group *grp, u32 pid,
@@ -590,7 +594,8 @@
return genlmsg_end(skb, hdr);
nla_put_failure:
- return genlmsg_cancel(skb, hdr);
+ genlmsg_cancel(skb, hdr);
+ return -EMSGSIZE;
}
static int ctrl_dumpfamily(struct sk_buff *skb, struct netlink_callback *cb)
@@ -601,9 +606,6 @@
int chains_to_skip = cb->args[0];
int fams_to_skip = cb->args[1];
- if (chains_to_skip != 0)
- genl_lock();
-
for (i = 0; i < GENL_FAM_TAB_SIZE; i++) {
if (i < chains_to_skip)
continue;
@@ -621,9 +623,6 @@
}
errout:
- if (chains_to_skip != 0)
- genl_unlock();
-
cb->args[0] = i;
cb->args[1] = n;
@@ -768,7 +767,7 @@
/* we'll bump the group number right afterwards */
genl_sock = netlink_kernel_create(&init_net, NETLINK_GENERIC, 0,
- genl_rcv, NULL, THIS_MODULE);
+ genl_rcv, &genl_mutex, THIS_MODULE);
if (genl_sock == NULL)
panic("GENL: Cannot initialize generic netlink\n");
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
index 82adfe6..9437b27 100644
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -106,17 +106,6 @@
To compile this code as a module, choose M here: the
module will be called sch_prio.
-config NET_SCH_RR
- tristate "Multi Band Round Robin Queuing (RR)"
- select NET_SCH_PRIO
- ---help---
- Say Y here if you want to use an n-band round robin packet
- scheduler.
-
- The module uses sch_prio for its framework and is aliased as
- sch_rr, so it will load sch_prio, although it is referred
- to using sch_rr.
-
config NET_SCH_RED
tristate "Random Early Detection (RED)"
---help---
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index c40773c..10f01ad 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -1252,12 +1252,12 @@
kfree(tp);
}
-void tcf_destroy_chain(struct tcf_proto *fl)
+void tcf_destroy_chain(struct tcf_proto **fl)
{
struct tcf_proto *tp;
- while ((tp = fl) != NULL) {
- fl = tp->next;
+ while ((tp = *fl) != NULL) {
+ *fl = tp->next;
tcf_destroy(tp);
}
}
diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c
index 3352734..db0e23a 100644
--- a/net/sched/sch_atm.c
+++ b/net/sched/sch_atm.c
@@ -160,7 +160,7 @@
*prev = flow->next;
pr_debug("atm_tc_put: qdisc %p\n", flow->q);
qdisc_destroy(flow->q);
- tcf_destroy_chain(flow->filter_list);
+ tcf_destroy_chain(&flow->filter_list);
if (flow->sock) {
pr_debug("atm_tc_put: f_count %d\n",
file_count(flow->sock->file));
@@ -586,10 +586,11 @@
struct atm_flow_data *flow;
pr_debug("atm_tc_destroy(sch %p,[qdisc %p])\n", sch, p);
+ for (flow = p->flows; flow; flow = flow->next)
+ tcf_destroy_chain(&flow->filter_list);
+
/* races ? */
while ((flow = p->flows)) {
- tcf_destroy_chain(flow->filter_list);
- flow->filter_list = NULL;
if (flow->ref > 1)
printk(KERN_ERR "atm_destroy: %p->ref = %d\n", flow,
flow->ref);
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index 09969c1..2a3c97f 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -1704,7 +1704,7 @@
BUG_TRAP(!cl->filters);
- tcf_destroy_chain(cl->filter_list);
+ tcf_destroy_chain(&cl->filter_list);
qdisc_destroy(cl->q);
qdisc_put_rtab(cl->R_tab);
gen_kill_estimator(&cl->bstats, &cl->rate_est);
@@ -1728,10 +1728,8 @@
* be bound to classes which have been destroyed already. --TGR '04
*/
for (h = 0; h < 16; h++) {
- for (cl = q->classes[h]; cl; cl = cl->next) {
- tcf_destroy_chain(cl->filter_list);
- cl->filter_list = NULL;
- }
+ for (cl = q->classes[h]; cl; cl = cl->next)
+ tcf_destroy_chain(&cl->filter_list);
}
for (h = 0; h < 16; h++) {
struct cbq_class *next;
diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c
index 0df911f..c4c1317 100644
--- a/net/sched/sch_dsmark.c
+++ b/net/sched/sch_dsmark.c
@@ -416,7 +416,7 @@
pr_debug("dsmark_destroy(sch %p,[qdisc %p])\n", sch, p);
- tcf_destroy_chain(p->filter_list);
+ tcf_destroy_chain(&p->filter_list);
qdisc_destroy(p->q);
kfree(p->mask);
}
@@ -444,7 +444,8 @@
return nla_nest_end(skb, opts);
nla_put_failure:
- return nla_nest_cancel(skb, opts);
+ nla_nest_cancel(skb, opts);
+ return -EMSGSIZE;
}
static int dsmark_dump(struct Qdisc *sch, struct sk_buff *skb)
@@ -466,7 +467,8 @@
return nla_nest_end(skb, opts);
nla_put_failure:
- return nla_nest_cancel(skb, opts);
+ nla_nest_cancel(skb, opts);
+ return -EMSGSIZE;
}
static const struct Qdisc_class_ops dsmark_class_ops = {
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index d355e5e..13afa72 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -468,7 +468,7 @@
return sch;
errout:
- return ERR_PTR(-err);
+ return ERR_PTR(err);
}
struct Qdisc * qdisc_create_dflt(struct net_device *dev, struct Qdisc_ops *ops,
diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c
index 3a9d226..c89fba5 100644
--- a/net/sched/sch_gred.c
+++ b/net/sched/sch_gred.c
@@ -582,7 +582,8 @@
return nla_nest_end(skb, opts);
nla_put_failure:
- return nla_nest_cancel(skb, opts);
+ nla_nest_cancel(skb, opts);
+ return -EMSGSIZE;
}
static void gred_destroy(struct Qdisc *sch)
diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c
index 87293d0..e817aa0 100644
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -1123,7 +1123,7 @@
{
struct hfsc_sched *q = qdisc_priv(sch);
- tcf_destroy_chain(cl->filter_list);
+ tcf_destroy_chain(&cl->filter_list);
qdisc_destroy(cl->qdisc);
gen_kill_estimator(&cl->bstats, &cl->rate_est);
if (cl != &q->root)
@@ -1360,7 +1360,7 @@
nla_put_failure:
nla_nest_cancel(skb, nest);
- return -1;
+ return -EMSGSIZE;
}
static int
@@ -1541,6 +1541,10 @@
unsigned int i;
for (i = 0; i < HFSC_HSIZE; i++) {
+ list_for_each_entry(cl, &q->clhash[i], hlist)
+ tcf_destroy_chain(&cl->filter_list);
+ }
+ for (i = 0; i < HFSC_HSIZE; i++) {
list_for_each_entry_safe(cl, next, &q->clhash[i], hlist)
hfsc_destroy_class(sch, cl);
}
diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
index 5bc1ed4..3fb58f4 100644
--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -28,6 +28,7 @@
* $Id: sch_htb.c,v 1.25 2003/12/07 11:08:25 devik Exp devik $
*/
#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
@@ -53,13 +54,17 @@
*/
#define HTB_HSIZE 16 /* classid hash size */
-#define HTB_HYSTERESIS 1 /* whether to use mode hysteresis for speedup */
+static int htb_hysteresis __read_mostly = 0; /* whether to use mode hysteresis for speedup */
#define HTB_VER 0x30011 /* major must be matched with number suplied by TC as version */
#if HTB_VER >> 16 != TC_HTB_PROTOVER
#error "Mismatched sch_htb.c and pkt_sch.h"
#endif
+/* Module parameter and sysfs export */
+module_param (htb_hysteresis, int, 0640);
+MODULE_PARM_DESC(htb_hysteresis, "Hysteresis mode, less CPU load, less accurate");
+
/* used internaly to keep status of single class */
enum htb_cmode {
HTB_CANT_SEND, /* class can't send and can't borrow */
@@ -462,19 +467,21 @@
htb_remove_class_from_row(q, cl, mask);
}
-#if HTB_HYSTERESIS
static inline long htb_lowater(const struct htb_class *cl)
{
- return cl->cmode != HTB_CANT_SEND ? -cl->cbuffer : 0;
+ if (htb_hysteresis)
+ return cl->cmode != HTB_CANT_SEND ? -cl->cbuffer : 0;
+ else
+ return 0;
}
static inline long htb_hiwater(const struct htb_class *cl)
{
- return cl->cmode == HTB_CAN_SEND ? -cl->buffer : 0;
+ if (htb_hysteresis)
+ return cl->cmode == HTB_CAN_SEND ? -cl->buffer : 0;
+ else
+ return 0;
}
-#else
-#define htb_lowater(cl) (0)
-#define htb_hiwater(cl) (0)
-#endif
+
/**
* htb_class_mode - computes and returns current class mode
@@ -1231,7 +1238,7 @@
qdisc_put_rtab(cl->rate);
qdisc_put_rtab(cl->ceil);
- tcf_destroy_chain(cl->filter_list);
+ tcf_destroy_chain(&cl->filter_list);
while (!list_empty(&cl->children))
htb_destroy_class(sch, list_entry(cl->children.next,
@@ -1260,7 +1267,7 @@
and surprisingly it worked in 2.4. But it must precede it
because filter need its target class alive to be able to call
unbind_filter on it (without Oops). */
- tcf_destroy_chain(q->filter_list);
+ tcf_destroy_chain(&q->filter_list);
while (!list_empty(&q->root))
htb_destroy_class(sch, list_entry(q->root.next,
diff --git a/net/sched/sch_ingress.c b/net/sched/sch_ingress.c
index 274b1dd..956c80a 100644
--- a/net/sched/sch_ingress.c
+++ b/net/sched/sch_ingress.c
@@ -104,7 +104,7 @@
{
struct ingress_qdisc_data *p = qdisc_priv(sch);
- tcf_destroy_chain(p->filter_list);
+ tcf_destroy_chain(&p->filter_list);
}
static int ingress_dump(struct Qdisc *sch, struct sk_buff *skb)
diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c
index 4aa2b45..5532f10 100644
--- a/net/sched/sch_prio.c
+++ b/net/sched/sch_prio.c
@@ -219,7 +219,7 @@
int prio;
struct prio_sched_data *q = qdisc_priv(sch);
- tcf_destroy_chain(q->filter_list);
+ tcf_destroy_chain(&q->filter_list);
for (prio=0; prio<q->bands; prio++)
qdisc_destroy(q->queues[prio]);
}
diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c
index 3dcd493f4..5c56985 100644
--- a/net/sched/sch_red.c
+++ b/net/sched/sch_red.c
@@ -281,7 +281,8 @@
return nla_nest_end(skb, opts);
nla_put_failure:
- return nla_nest_cancel(skb, opts);
+ nla_nest_cancel(skb, opts);
+ return -EMSGSIZE;
}
static int red_dump_stats(struct Qdisc *sch, struct gnet_dump *d)
diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c
index f0463d7..6a97afb 100644
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -520,7 +520,7 @@
{
struct sfq_sched_data *q = qdisc_priv(sch);
- tcf_destroy_chain(q->filter_list);
+ tcf_destroy_chain(&q->filter_list);
q->perturb_period = 0;
del_timer_sync(&q->perturb_timer);
}
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index b4cd2b7..024c3eb 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -474,6 +474,15 @@
void sctp_assoc_set_primary(struct sctp_association *asoc,
struct sctp_transport *transport)
{
+ int changeover = 0;
+
+ /* it's a changeover only if we already have a primary path
+ * that we are changing
+ */
+ if (asoc->peer.primary_path != NULL &&
+ asoc->peer.primary_path != transport)
+ changeover = 1 ;
+
asoc->peer.primary_path = transport;
/* Set a default msg_name for events. */
@@ -499,12 +508,12 @@
* double switch to the same destination address.
*/
if (transport->cacc.changeover_active)
- transport->cacc.cycling_changeover = 1;
+ transport->cacc.cycling_changeover = changeover;
/* 2) The sender MUST set CHANGEOVER_ACTIVE to indicate that
* a changeover has occurred.
*/
- transport->cacc.changeover_active = 1;
+ transport->cacc.changeover_active = changeover;
/* 3) The sender MUST store the next TSN to be sent in
* next_tsn_at_change.
@@ -1203,6 +1212,9 @@
struct list_head *head = &asoc->peer.transport_addr_list;
struct list_head *pos;
+ if (asoc->peer.transport_count == 1)
+ return;
+
/* Find the next transport in a round-robin fashion. */
t = asoc->peer.retran_path;
pos = &t->transports;
@@ -1217,6 +1229,15 @@
t = list_entry(pos, struct sctp_transport, transports);
+ /* We have exhausted the list, but didn't find any
+ * other active transports. If so, use the next
+ * transport.
+ */
+ if (t == asoc->peer.retran_path) {
+ t = next;
+ break;
+ }
+
/* Try to find an active transport. */
if ((t->state == SCTP_ACTIVE) ||
@@ -1229,15 +1250,6 @@
if (!next)
next = t;
}
-
- /* We have exhausted the list, but didn't find any
- * other active transports. If so, use the next
- * transport.
- */
- if (t == asoc->peer.retran_path) {
- t = next;
- break;
- }
}
asoc->peer.retran_path = t;
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index e45e44c..a2f4d4d 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -299,7 +299,8 @@
/* Fills in the source address(saddr) based on the destination address(daddr)
* and asoc's bind address list.
*/
-static void sctp_v6_get_saddr(struct sctp_association *asoc,
+static void sctp_v6_get_saddr(struct sctp_sock *sk,
+ struct sctp_association *asoc,
struct dst_entry *dst,
union sctp_addr *daddr,
union sctp_addr *saddr)
@@ -318,7 +319,7 @@
if (!asoc) {
ipv6_dev_get_saddr(dst ? ip6_dst_idev(dst)->dev : NULL,
&daddr->v6.sin6_addr,
- inet6_sk(asoc->base.sk)->srcprefs,
+ inet6_sk(&sk->inet.sk)->srcprefs,
&saddr->v6.sin6_addr);
SCTP_DEBUG_PRINTK("saddr from ipv6_get_saddr: " NIP6_FMT "\n",
NIP6(saddr->v6.sin6_addr));
@@ -726,6 +727,11 @@
seq_printf(seq, NIP6_FMT " ", NIP6(addr->v6.sin6_addr));
}
+static void sctp_v6_ecn_capable(struct sock *sk)
+{
+ inet6_sk(sk)->tclass |= INET_ECN_ECT_0;
+}
+
/* Initialize a PF_INET6 socket msg_name. */
static void sctp_inet6_msgname(char *msgname, int *addr_len)
{
@@ -996,6 +1002,7 @@
.skb_iif = sctp_v6_skb_iif,
.is_ce = sctp_v6_is_ce,
.seq_dump_addr = sctp_v6_seq_dump_addr,
+ .ecn_capable = sctp_v6_ecn_capable,
.net_header_len = sizeof(struct ipv6hdr),
.sockaddr_len = sizeof(struct sockaddr_in6),
#ifdef CONFIG_COMPAT
diff --git a/net/sctp/output.c b/net/sctp/output.c
index cf4f9fb..6d45bae 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -548,7 +548,7 @@
* Note: The works for IPv6 layer checks this bit too later
* in transmission. See IP6_ECN_flow_xmit().
*/
- INET_ECN_xmit(nskb->sk);
+ (*tp->af_specific->ecn_capable)(nskb->sk);
/* Set up the IP options. */
/* BUG: not implemented
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index 59edfd2..ace6770 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -208,6 +208,7 @@
INIT_LIST_HEAD(&q->sacked);
INIT_LIST_HEAD(&q->abandoned);
+ q->fast_rtx = 0;
q->outstanding_bytes = 0;
q->empty = 1;
q->cork = 0;
@@ -500,6 +501,7 @@
case SCTP_RTXR_FAST_RTX:
SCTP_INC_STATS(SCTP_MIB_FAST_RETRANSMITS);
sctp_transport_lower_cwnd(transport, SCTP_LOWER_CWND_FAST_RTX);
+ q->fast_rtx = 1;
break;
case SCTP_RTXR_PMTUD:
SCTP_INC_STATS(SCTP_MIB_PMTUD_RETRANSMITS);
@@ -518,9 +520,15 @@
* the sender SHOULD try to advance the "Advanced.Peer.Ack.Point" by
* following the procedures outlined in C1 - C5.
*/
- sctp_generate_fwdtsn(q, q->asoc->ctsn_ack_point);
+ if (reason == SCTP_RTXR_T3_RTX)
+ sctp_generate_fwdtsn(q, q->asoc->ctsn_ack_point);
- error = sctp_outq_flush(q, /* rtx_timeout */ 1);
+ /* Flush the queues only on timeout, since fast_rtx is only
+ * triggered during sack processing and the queue
+ * will be flushed at the end.
+ */
+ if (reason != SCTP_RTXR_FAST_RTX)
+ error = sctp_outq_flush(q, /* rtx_timeout */ 1);
if (error)
q->asoc->base.sk->sk_err = -error;
@@ -538,17 +546,23 @@
int rtx_timeout, int *start_timer)
{
struct list_head *lqueue;
- struct list_head *lchunk;
struct sctp_transport *transport = pkt->transport;
sctp_xmit_t status;
struct sctp_chunk *chunk, *chunk1;
struct sctp_association *asoc;
+ int fast_rtx;
int error = 0;
+ int timer = 0;
+ int done = 0;
asoc = q->asoc;
lqueue = &q->retransmit;
+ fast_rtx = q->fast_rtx;
- /* RFC 2960 6.3.3 Handle T3-rtx Expiration
+ /* This loop handles time-out retransmissions, fast retransmissions,
+ * and retransmissions due to opening of whindow.
+ *
+ * RFC 2960 6.3.3 Handle T3-rtx Expiration
*
* E3) Determine how many of the earliest (i.e., lowest TSN)
* outstanding DATA chunks for the address for which the
@@ -563,12 +577,12 @@
* [Just to be painfully clear, if we are retransmitting
* because a timeout just happened, we should send only ONE
* packet of retransmitted data.]
+ *
+ * For fast retransmissions we also send only ONE packet. However,
+ * if we are just flushing the queue due to open window, we'll
+ * try to send as much as possible.
*/
- lchunk = sctp_list_dequeue(lqueue);
-
- while (lchunk) {
- chunk = list_entry(lchunk, struct sctp_chunk,
- transmitted_list);
+ list_for_each_entry_safe(chunk, chunk1, lqueue, transmitted_list) {
/* Make sure that Gap Acked TSNs are not retransmitted. A
* simple approach is just to move such TSNs out of the
@@ -576,58 +590,60 @@
* next chunk.
*/
if (chunk->tsn_gap_acked) {
- list_add_tail(lchunk, &transport->transmitted);
- lchunk = sctp_list_dequeue(lqueue);
+ list_del(&chunk->transmitted_list);
+ list_add_tail(&chunk->transmitted_list,
+ &transport->transmitted);
continue;
}
+ /* If we are doing fast retransmit, ignore non-fast_rtransmit
+ * chunks
+ */
+ if (fast_rtx && !chunk->fast_retransmit)
+ continue;
+
/* Attempt to append this chunk to the packet. */
status = sctp_packet_append_chunk(pkt, chunk);
switch (status) {
case SCTP_XMIT_PMTU_FULL:
/* Send this packet. */
- if ((error = sctp_packet_transmit(pkt)) == 0)
- *start_timer = 1;
+ error = sctp_packet_transmit(pkt);
/* If we are retransmitting, we should only
* send a single packet.
*/
- if (rtx_timeout) {
- list_add(lchunk, lqueue);
- lchunk = NULL;
- }
+ if (rtx_timeout || fast_rtx)
+ done = 1;
- /* Bundle lchunk in the next round. */
+ /* Bundle next chunk in the next round. */
break;
case SCTP_XMIT_RWND_FULL:
/* Send this packet. */
- if ((error = sctp_packet_transmit(pkt)) == 0)
- *start_timer = 1;
+ error = sctp_packet_transmit(pkt);
/* Stop sending DATA as there is no more room
* at the receiver.
*/
- list_add(lchunk, lqueue);
- lchunk = NULL;
+ done = 1;
break;
case SCTP_XMIT_NAGLE_DELAY:
/* Send this packet. */
- if ((error = sctp_packet_transmit(pkt)) == 0)
- *start_timer = 1;
+ error = sctp_packet_transmit(pkt);
/* Stop sending DATA because of nagle delay. */
- list_add(lchunk, lqueue);
- lchunk = NULL;
+ done = 1;
break;
default:
/* The append was successful, so add this chunk to
* the transmitted list.
*/
- list_add_tail(lchunk, &transport->transmitted);
+ list_del(&chunk->transmitted_list);
+ list_add_tail(&chunk->transmitted_list,
+ &transport->transmitted);
/* Mark the chunk as ineligible for fast retransmit
* after it is retransmitted.
@@ -635,27 +651,44 @@
if (chunk->fast_retransmit > 0)
chunk->fast_retransmit = -1;
- *start_timer = 1;
- q->empty = 0;
+ /* Force start T3-rtx timer when fast retransmitting
+ * the earliest outstanding TSN
+ */
+ if (!timer && fast_rtx &&
+ ntohl(chunk->subh.data_hdr->tsn) ==
+ asoc->ctsn_ack_point + 1)
+ timer = 2;
- /* Retrieve a new chunk to bundle. */
- lchunk = sctp_list_dequeue(lqueue);
+ q->empty = 0;
break;
}
- /* If we are here due to a retransmit timeout or a fast
- * retransmit and if there are any chunks left in the retransmit
- * queue that could not fit in the PMTU sized packet, they need
- * to be marked as ineligible for a subsequent fast retransmit.
- */
- if (rtx_timeout && !lchunk) {
- list_for_each_entry(chunk1, lqueue, transmitted_list) {
- if (chunk1->fast_retransmit > 0)
- chunk1->fast_retransmit = -1;
- }
+ /* Set the timer if there were no errors */
+ if (!error && !timer)
+ timer = 1;
+
+ if (done)
+ break;
+ }
+
+ /* If we are here due to a retransmit timeout or a fast
+ * retransmit and if there are any chunks left in the retransmit
+ * queue that could not fit in the PMTU sized packet, they need
+ * to be marked as ineligible for a subsequent fast retransmit.
+ */
+ if (rtx_timeout || fast_rtx) {
+ list_for_each_entry(chunk1, lqueue, transmitted_list) {
+ if (chunk1->fast_retransmit > 0)
+ chunk1->fast_retransmit = -1;
}
}
+ *start_timer = timer;
+
+ /* Clear fast retransmit hint */
+ if (fast_rtx)
+ q->fast_rtx = 0;
+
return error;
}
@@ -862,7 +895,8 @@
rtx_timeout, &start_timer);
if (start_timer)
- sctp_transport_reset_timers(transport);
+ sctp_transport_reset_timers(transport,
+ start_timer-1);
/* This can happen on COOKIE-ECHO resend. Only
* one chunk can get bundled with a COOKIE-ECHO.
@@ -977,7 +1011,7 @@
list_add_tail(&chunk->transmitted_list,
&transport->transmitted);
- sctp_transport_reset_timers(transport);
+ sctp_transport_reset_timers(transport, start_timer-1);
q->empty = 0;
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 0ec234b..9258dfe 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -108,14 +108,23 @@
}
if (sctp_snmp_proc_init())
- goto out_nomem;
+ goto out_snmp_proc_init;
if (sctp_eps_proc_init())
- goto out_nomem;
+ goto out_eps_proc_init;
if (sctp_assocs_proc_init())
- goto out_nomem;
+ goto out_assocs_proc_init;
return 0;
+out_assocs_proc_init:
+ sctp_eps_proc_exit();
+out_eps_proc_init:
+ sctp_snmp_proc_exit();
+out_snmp_proc_init:
+ if (proc_net_sctp) {
+ proc_net_sctp = NULL;
+ remove_proc_entry("sctp", init_net.proc_net);
+ }
out_nomem:
return -ENOMEM;
}
@@ -470,11 +479,11 @@
/* Walk through the bind address list and look for a bind
* address that matches the source address of the returned dst.
*/
+ sctp_v4_dst_saddr(&dst_saddr, dst, htons(bp->port));
rcu_read_lock();
list_for_each_entry_rcu(laddr, &bp->address_list, list) {
if (!laddr->valid || (laddr->state != SCTP_ADDR_SRC))
continue;
- sctp_v4_dst_saddr(&dst_saddr, dst, htons(bp->port));
if (sctp_v4_cmp_addr(&dst_saddr, &laddr->a))
goto out_unlock;
}
@@ -519,7 +528,8 @@
/* For v4, the source address is cached in the route entry(dst). So no need
* to cache it separately and hence this is an empty routine.
*/
-static void sctp_v4_get_saddr(struct sctp_association *asoc,
+static void sctp_v4_get_saddr(struct sctp_sock *sk,
+ struct sctp_association *asoc,
struct dst_entry *dst,
union sctp_addr *daddr,
union sctp_addr *saddr)
@@ -616,6 +626,11 @@
seq_printf(seq, "%d.%d.%d.%d ", NIPQUAD(addr->v4.sin_addr));
}
+static void sctp_v4_ecn_capable(struct sock *sk)
+{
+ INET_ECN_xmit(sk);
+}
+
/* Event handler for inet address addition/deletion events.
* The sctp_local_addr_list needs to be protocted by a spin lock since
* multiple notifiers (say IPv4 and IPv6) may be running at the same
@@ -934,6 +949,7 @@
.skb_iif = sctp_v4_skb_iif,
.is_ce = sctp_v4_is_ce,
.seq_dump_addr = sctp_v4_seq_dump_addr,
+ .ecn_capable = sctp_v4_ecn_capable,
.net_header_len = sizeof(struct iphdr),
.sockaddr_len = sizeof(struct sockaddr_in),
#ifdef CONFIG_COMPAT
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 0c9d5a6..fcdb45d 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -5899,12 +5899,6 @@
return SCTP_IERROR_NO_DATA;
}
- /* If definately accepting the DATA chunk, record its TSN, otherwise
- * wait for renege processing.
- */
- if (SCTP_CMD_CHUNK_ULP == deliver)
- sctp_add_cmd_sf(commands, SCTP_CMD_REPORT_TSN, SCTP_U32(tsn));
-
chunk->data_accepted = 1;
/* Note: Some chunks may get overcounted (if we drop) or overcounted
@@ -5924,6 +5918,9 @@
* and discard the DATA chunk.
*/
if (ntohs(data_hdr->stream) >= asoc->c.sinit_max_instreams) {
+ /* Mark tsn as received even though we drop it */
+ sctp_add_cmd_sf(commands, SCTP_CMD_REPORT_TSN, SCTP_U32(tsn));
+
err = sctp_make_op_error(asoc, chunk, SCTP_ERROR_INV_STRM,
&data_hdr->stream,
sizeof(data_hdr->stream));
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index e7e3baf..0dbcde6 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -4401,7 +4401,9 @@
if (copy_from_user(&getaddrs, optval, len))
return -EFAULT;
- if (getaddrs.addr_num <= 0) return -EINVAL;
+ if (getaddrs.addr_num <= 0 ||
+ getaddrs.addr_num >= (INT_MAX / sizeof(union sctp_addr)))
+ return -EINVAL;
/*
* For UDP-style sockets, id specifies the association to query.
* If the id field is set to the value '0' then the locally bound
diff --git a/net/sctp/transport.c b/net/sctp/transport.c
index f4938f6..3f34f61 100644
--- a/net/sctp/transport.c
+++ b/net/sctp/transport.c
@@ -79,6 +79,7 @@
peer->rttvar = 0;
peer->srtt = 0;
peer->rto_pending = 0;
+ peer->fast_recovery = 0;
peer->last_time_heard = jiffies;
peer->last_time_used = jiffies;
@@ -190,7 +191,7 @@
/* Start T3_rtx timer if it is not already running and update the heartbeat
* timer. This routine is called every time a DATA chunk is sent.
*/
-void sctp_transport_reset_timers(struct sctp_transport *transport)
+void sctp_transport_reset_timers(struct sctp_transport *transport, int force)
{
/* RFC 2960 6.3.2 Retransmission Timer Rules
*
@@ -200,7 +201,7 @@
* address.
*/
- if (!timer_pending(&transport->T3_rtx_timer))
+ if (force || !timer_pending(&transport->T3_rtx_timer))
if (!mod_timer(&transport->T3_rtx_timer,
jiffies + transport->rto))
sctp_transport_hold(transport);
@@ -291,7 +292,7 @@
if (saddr)
memcpy(&transport->saddr, saddr, sizeof(union sctp_addr));
else
- af->get_saddr(asoc, dst, daddr, &transport->saddr);
+ af->get_saddr(opt, asoc, dst, daddr, &transport->saddr);
transport->dst = dst;
if ((transport->param_flags & SPP_PMTUD_DISABLE) && transport->pathmtu) {
@@ -403,11 +404,16 @@
cwnd = transport->cwnd;
flight_size = transport->flight_size;
+ /* See if we need to exit Fast Recovery first */
+ if (transport->fast_recovery &&
+ TSN_lte(transport->fast_recovery_exit, sack_ctsn))
+ transport->fast_recovery = 0;
+
/* The appropriate cwnd increase algorithm is performed if, and only
- * if the cumulative TSN has advanced and the congestion window is
+ * if the cumulative TSN whould advanced and the congestion window is
* being fully utilized.
*/
- if ((transport->asoc->ctsn_ack_point >= sack_ctsn) ||
+ if (TSN_lte(sack_ctsn, transport->asoc->ctsn_ack_point) ||
(flight_size < cwnd))
return;
@@ -416,17 +422,23 @@
pmtu = transport->asoc->pathmtu;
if (cwnd <= ssthresh) {
- /* RFC 2960 7.2.1, sctpimpguide-05 2.14.2 When cwnd is less
- * than or equal to ssthresh an SCTP endpoint MUST use the
- * slow start algorithm to increase cwnd only if the current
- * congestion window is being fully utilized and an incoming
- * SACK advances the Cumulative TSN Ack Point. Only when these
- * two conditions are met can the cwnd be increased otherwise
- * the cwnd MUST not be increased. If these conditions are met
- * then cwnd MUST be increased by at most the lesser of
- * 1) the total size of the previously outstanding DATA
- * chunk(s) acknowledged, and 2) the destination's path MTU.
+ /* RFC 4960 7.2.1
+ * o When cwnd is less than or equal to ssthresh, an SCTP
+ * endpoint MUST use the slow-start algorithm to increase
+ * cwnd only if the current congestion window is being fully
+ * utilized, an incoming SACK advances the Cumulative TSN
+ * Ack Point, and the data sender is not in Fast Recovery.
+ * Only when these three conditions are met can the cwnd be
+ * increased; otherwise, the cwnd MUST not be increased.
+ * If these conditions are met, then cwnd MUST be increased
+ * by, at most, the lesser of 1) the total size of the
+ * previously outstanding DATA chunk(s) acknowledged, and
+ * 2) the destination's path MTU. This upper bound protects
+ * against the ACK-Splitting attack outlined in [SAVAGE99].
*/
+ if (transport->fast_recovery)
+ return;
+
if (bytes_acked > pmtu)
cwnd += pmtu;
else
@@ -502,6 +514,13 @@
* cwnd = ssthresh
* partial_bytes_acked = 0
*/
+ if (transport->fast_recovery)
+ return;
+
+ /* Mark Fast recovery */
+ transport->fast_recovery = 1;
+ transport->fast_recovery_exit = transport->asoc->next_tsn - 1;
+
transport->ssthresh = max(transport->cwnd/2,
4*transport->asoc->pathmtu);
transport->cwnd = transport->ssthresh;
@@ -586,6 +605,7 @@
t->flight_size = 0;
t->error_count = 0;
t->rto_pending = 0;
+ t->fast_recovery = 0;
/* Initialize the state information for SFR-CACC */
t->cacc.changeover_active = 0;
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index ce6cda6..a1f654a 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -710,6 +710,11 @@
if (!skb)
goto fail;
+ /* Now that all memory allocations for this chunk succeeded, we
+ * can mark it as received so the tsn_map is updated correctly.
+ */
+ sctp_tsnmap_mark(&asoc->peer.tsn_map, ntohl(chunk->subh.data_hdr->tsn));
+
/* First calculate the padding, so we don't inadvertently
* pass up the wrong length to the user.
*
diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index 5905d567..81ae3d6 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -1144,20 +1144,20 @@
case RPC_GSS_SVC_NONE:
break;
case RPC_GSS_SVC_INTEGRITY:
+ /* placeholders for length and seq. number: */
+ svc_putnl(resv, 0);
+ svc_putnl(resv, 0);
if (unwrap_integ_data(&rqstp->rq_arg,
gc->gc_seq, rsci->mechctx))
goto garbage_args;
+ break;
+ case RPC_GSS_SVC_PRIVACY:
/* placeholders for length and seq. number: */
svc_putnl(resv, 0);
svc_putnl(resv, 0);
- break;
- case RPC_GSS_SVC_PRIVACY:
if (unwrap_priv_data(rqstp, &rqstp->rq_arg,
gc->gc_seq, rsci->mechctx))
goto garbage_args;
- /* placeholders for length and seq. number: */
- svc_putnl(resv, 0);
- svc_putnl(resv, 0);
break;
default:
goto auth_err;
@@ -1170,8 +1170,6 @@
goto out;
}
garbage_args:
- /* Restore write pointer to its original value: */
- xdr_ressize_check(rqstp, reject_stat);
ret = SVC_GARBAGE;
goto out;
auth_err:
diff --git a/net/sunrpc/rpcb_clnt.c b/net/sunrpc/rpcb_clnt.c
index 0517967..e6fb21b 100644
--- a/net/sunrpc/rpcb_clnt.c
+++ b/net/sunrpc/rpcb_clnt.c
@@ -243,10 +243,10 @@
}
EXPORT_SYMBOL_GPL(rpcb_getport_sync);
-static struct rpc_task *rpcb_call_async(struct rpc_clnt *rpcb_clnt, struct rpcbind_args *map, int version)
+static struct rpc_task *rpcb_call_async(struct rpc_clnt *rpcb_clnt, struct rpcbind_args *map, struct rpc_procinfo *proc)
{
struct rpc_message msg = {
- .rpc_proc = rpcb_next_version[version].rpc_proc,
+ .rpc_proc = proc,
.rpc_argp = map,
.rpc_resp = &map->r_port,
};
@@ -271,6 +271,7 @@
void rpcb_getport_async(struct rpc_task *task)
{
struct rpc_clnt *clnt = task->tk_client;
+ struct rpc_procinfo *proc;
u32 bind_version;
struct rpc_xprt *xprt = task->tk_xprt;
struct rpc_clnt *rpcb_clnt;
@@ -280,7 +281,6 @@
struct sockaddr *sap = (struct sockaddr *)&addr;
size_t salen;
int status;
- struct rpcb_info *info;
dprintk("RPC: %5u %s(%s, %u, %u, %d)\n",
task->tk_pid, __func__,
@@ -313,10 +313,12 @@
/* Don't ever use rpcbind v2 for AF_INET6 requests */
switch (sap->sa_family) {
case AF_INET:
- info = rpcb_next_version;
+ proc = rpcb_next_version[xprt->bind_index].rpc_proc;
+ bind_version = rpcb_next_version[xprt->bind_index].rpc_vers;
break;
case AF_INET6:
- info = rpcb_next_version6;
+ proc = rpcb_next_version6[xprt->bind_index].rpc_proc;
+ bind_version = rpcb_next_version6[xprt->bind_index].rpc_vers;
break;
default:
status = -EAFNOSUPPORT;
@@ -324,14 +326,13 @@
task->tk_pid, __func__);
goto bailout_nofree;
}
- if (info[xprt->bind_index].rpc_proc == NULL) {
+ if (proc == NULL) {
xprt->bind_index = 0;
status = -EPFNOSUPPORT;
dprintk("RPC: %5u %s: no more getport versions available\n",
task->tk_pid, __func__);
goto bailout_nofree;
}
- bind_version = info[xprt->bind_index].rpc_vers;
dprintk("RPC: %5u %s: trying rpcbind version %u\n",
task->tk_pid, __func__, bind_version);
@@ -361,22 +362,20 @@
map->r_addr = rpc_peeraddr2str(rpcb_clnt, RPC_DISPLAY_UNIVERSAL_ADDR);
map->r_owner = RPCB_OWNER_STRING; /* ignored for GETADDR */
- child = rpcb_call_async(rpcb_clnt, map, xprt->bind_index);
+ child = rpcb_call_async(rpcb_clnt, map, proc);
rpc_release_client(rpcb_clnt);
if (IS_ERR(child)) {
status = -EIO;
+ /* rpcb_map_release() has freed the arguments */
dprintk("RPC: %5u %s: rpc_run_task failed\n",
task->tk_pid, __func__);
- goto bailout;
+ goto bailout_nofree;
}
rpc_put_task(child);
task->tk_xprt->stat.bind_count++;
return;
-bailout:
- kfree(map);
- xprt_put(xprt);
bailout_nofree:
rpcb_wake_rpcbind_waiters(xprt, status);
bailout_nowake:
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index e18cd36..783317d 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -169,6 +169,11 @@
return (unix_peer(osk) == NULL || unix_our_peer(sk, osk));
}
+static inline int unix_recvq_full(struct sock const *sk)
+{
+ return skb_queue_len(&sk->sk_receive_queue) > sk->sk_max_ack_backlog;
+}
+
static struct sock *unix_peer_get(struct sock *s)
{
struct sock *peer;
@@ -482,6 +487,8 @@
static int unix_accept(struct socket *, struct socket *, int);
static int unix_getname(struct socket *, struct sockaddr *, int *, int);
static unsigned int unix_poll(struct file *, struct socket *, poll_table *);
+static unsigned int unix_dgram_poll(struct file *, struct socket *,
+ poll_table *);
static int unix_ioctl(struct socket *, unsigned int, unsigned long);
static int unix_shutdown(struct socket *, int);
static int unix_stream_sendmsg(struct kiocb *, struct socket *,
@@ -527,7 +534,7 @@
.socketpair = unix_socketpair,
.accept = sock_no_accept,
.getname = unix_getname,
- .poll = datagram_poll,
+ .poll = unix_dgram_poll,
.ioctl = unix_ioctl,
.listen = sock_no_listen,
.shutdown = unix_shutdown,
@@ -548,7 +555,7 @@
.socketpair = unix_socketpair,
.accept = unix_accept,
.getname = unix_getname,
- .poll = datagram_poll,
+ .poll = unix_dgram_poll,
.ioctl = unix_ioctl,
.listen = unix_listen,
.shutdown = unix_shutdown,
@@ -983,8 +990,7 @@
sched = !sock_flag(other, SOCK_DEAD) &&
!(other->sk_shutdown & RCV_SHUTDOWN) &&
- (skb_queue_len(&other->sk_receive_queue) >
- other->sk_max_ack_backlog);
+ unix_recvq_full(other);
unix_state_unlock(other);
@@ -1058,8 +1064,7 @@
if (other->sk_state != TCP_LISTEN)
goto out_unlock;
- if (skb_queue_len(&other->sk_receive_queue) >
- other->sk_max_ack_backlog) {
+ if (unix_recvq_full(other)) {
err = -EAGAIN;
if (!timeo)
goto out_unlock;
@@ -1428,9 +1433,7 @@
goto out_unlock;
}
- if (unix_peer(other) != sk &&
- (skb_queue_len(&other->sk_receive_queue) >
- other->sk_max_ack_backlog)) {
+ if (unix_peer(other) != sk && unix_recvq_full(other)) {
if (!timeo) {
err = -EAGAIN;
goto out_unlock;
@@ -1991,6 +1994,60 @@
return mask;
}
+static unsigned int unix_dgram_poll(struct file *file, struct socket *sock,
+ poll_table *wait)
+{
+ struct sock *sk = sock->sk, *other;
+ unsigned int mask, writable;
+
+ poll_wait(file, sk->sk_sleep, wait);
+ mask = 0;
+
+ /* exceptional events? */
+ if (sk->sk_err || !skb_queue_empty(&sk->sk_error_queue))
+ mask |= POLLERR;
+ if (sk->sk_shutdown & RCV_SHUTDOWN)
+ mask |= POLLRDHUP;
+ if (sk->sk_shutdown == SHUTDOWN_MASK)
+ mask |= POLLHUP;
+
+ /* readable? */
+ if (!skb_queue_empty(&sk->sk_receive_queue) ||
+ (sk->sk_shutdown & RCV_SHUTDOWN))
+ mask |= POLLIN | POLLRDNORM;
+
+ /* Connection-based need to check for termination and startup */
+ if (sk->sk_type == SOCK_SEQPACKET) {
+ if (sk->sk_state == TCP_CLOSE)
+ mask |= POLLHUP;
+ /* connection hasn't started yet? */
+ if (sk->sk_state == TCP_SYN_SENT)
+ return mask;
+ }
+
+ /* writable? */
+ writable = unix_writable(sk);
+ if (writable) {
+ other = unix_peer_get(sk);
+ if (other) {
+ if (unix_peer(other) != sk) {
+ poll_wait(file, &unix_sk(other)->peer_wait,
+ wait);
+ if (unix_recvq_full(other))
+ writable = 0;
+ }
+
+ sock_put(other);
+ }
+ }
+
+ if (writable)
+ mask |= POLLOUT | POLLWRNORM | POLLWRBAND;
+ else
+ set_bit(SOCK_ASYNC_NOSPACE, &sk->sk_socket->flags);
+
+ return mask;
+}
#ifdef CONFIG_PROC_FS
static struct sock *first_unix_socket(int *i)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 2bdd4dd..fb75f26 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -187,7 +187,8 @@
return genlmsg_end(msg, hdr);
nla_put_failure:
- return genlmsg_cancel(msg, hdr);
+ genlmsg_cancel(msg, hdr);
+ return -EMSGSIZE;
}
static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb)
@@ -273,7 +274,8 @@
return genlmsg_end(msg, hdr);
nla_put_failure:
- return genlmsg_cancel(msg, hdr);
+ genlmsg_cancel(msg, hdr);
+ return -EMSGSIZE;
}
static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback *cb)
@@ -928,7 +930,8 @@
return genlmsg_end(msg, hdr);
nla_put_failure:
- return genlmsg_cancel(msg, hdr);
+ genlmsg_cancel(msg, hdr);
+ return -EMSGSIZE;
}
static int nl80211_dump_station(struct sk_buff *skb,
@@ -1267,7 +1270,8 @@
return genlmsg_end(msg, hdr);
nla_put_failure:
- return genlmsg_cancel(msg, hdr);
+ genlmsg_cancel(msg, hdr);
+ return -EMSGSIZE;
}
static int nl80211_dump_mpath(struct sk_buff *skb,
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 185488d..855bff4 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -80,6 +80,23 @@
IEEE80211_CHAN_RADAR),
};
+static const struct ieee80211_channel_range ieee80211_EU_channels[] = {
+ /* IEEE 802.11b/g, channels 1..13 */
+ RANGE_PWR(2412, 2472, 20, 6, 0),
+ /* IEEE 802.11a, channel 36*/
+ RANGE_PWR(5180, 5180, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN),
+ /* IEEE 802.11a, channel 40*/
+ RANGE_PWR(5200, 5200, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN),
+ /* IEEE 802.11a, channel 44*/
+ RANGE_PWR(5220, 5220, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN),
+ /* IEEE 802.11a, channels 48..64 */
+ RANGE_PWR(5240, 5320, 23, 6, IEEE80211_CHAN_NO_IBSS |
+ IEEE80211_CHAN_RADAR),
+ /* IEEE 802.11a, channels 100..140 */
+ RANGE_PWR(5500, 5700, 30, 6, IEEE80211_CHAN_NO_IBSS |
+ IEEE80211_CHAN_RADAR),
+};
+
#define REGDOM(_code) \
{ \
.code = __stringify(_code), \
@@ -90,6 +107,7 @@
static const struct ieee80211_regdomain ieee80211_regdoms[] = {
REGDOM(US),
REGDOM(JP),
+ REGDOM(EU),
};
diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c
index ac765dd..23a2cc04 100644
--- a/net/xfrm/xfrm_algo.c
+++ b/net/xfrm/xfrm_algo.c
@@ -200,8 +200,8 @@
}
},
{
- .name = "hmac(ripemd160)",
- .compat = "ripemd160",
+ .name = "hmac(rmd160)",
+ .compat = "rmd160",
.uinfo = {
.auth = {
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index b976d9e..04c4150 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -277,9 +277,8 @@
memcpy(&x->props.saddr, &p->saddr, sizeof(x->props.saddr));
x->props.flags = p->flags;
- if (!x->sel.family)
+ if (!x->sel.family && !(p->flags & XFRM_STATE_AF_UNSPEC))
x->sel.family = p->family;
-
}
/*
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index a098a04..17092d6 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -43,7 +43,13 @@
include include/config/auto.conf
include scripts/Kbuild.include
+# When building external modules load the Kbuild file to retreive EXTRA_SYMBOLS info
ifneq ($(KBUILD_EXTMOD),)
+
+# set src + obj - they may be used when building the .mod.c file
+obj := $(KBUILD_EXTMOD)
+src := $(obj)
+
# Include the module's Makefile to find KBUILD_EXTRA_SYMBOLS
include $(if $(wildcard $(KBUILD_EXTMOD)/Kbuild), \
$(KBUILD_EXTMOD)/Kbuild, $(KBUILD_EXTMOD)/Makefile)
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index b6bbbcd..6971bf0 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -9,7 +9,7 @@
my $P = $0;
$P =~ s@.*/@@g;
-my $V = '0.18';
+my $V = '0.19';
use Getopt::Long qw(:config no_auto_abbrev);
@@ -115,6 +115,7 @@
__kprobes|
__(?:mem|cpu|dev|)(?:initdata|init)
}x;
+our $Modifier;
our $Inline = qr{inline|__always_inline|noinline};
our $Member = qr{->$Ident|\.$Ident|\[[^]]*\]};
our $Lval = qr{$Ident(?:$Member)*};
@@ -144,17 +145,17 @@
our @typeList = (
qr{void},
- qr{char},
- qr{short},
- qr{int},
- qr{long},
+ qr{(?:unsigned\s+)?char},
+ qr{(?:unsigned\s+)?short},
+ qr{(?:unsigned\s+)?int},
+ qr{(?:unsigned\s+)?long},
+ qr{(?:unsigned\s+)?long\s+int},
+ qr{(?:unsigned\s+)?long\s+long},
+ qr{(?:unsigned\s+)?long\s+long\s+int},
qr{unsigned},
qr{float},
qr{double},
qr{bool},
- qr{long\s+int},
- qr{long\s+long},
- qr{long\s+long\s+int},
qr{(?:__)?(?:u|s|be|le)(?:8|16|32|64)},
qr{struct\s+$Ident},
qr{union\s+$Ident},
@@ -163,26 +164,29 @@
qr{${Ident}_handler},
qr{${Ident}_handler_fn},
);
+our @modifierList = (
+ qr{fastcall},
+);
sub build_types {
+ my $mods = "(?: \n" . join("|\n ", @modifierList) . "\n)";
my $all = "(?: \n" . join("|\n ", @typeList) . "\n)";
$NonptrType = qr{
- \b
(?:const\s+)?
- (?:unsigned\s+)?
+ (?:$mods\s+)?
(?:
- $all|
- (?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)
+ (?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)|
+ (?:${all}\b)
)
(?:\s+$Sparse|\s+const)*
- \b
}x;
$Type = qr{
- \b$NonptrType\b
+ $NonptrType
(?:\s*\*+\s*const|\s*\*+|(?:\s*\[\s*\])+)?
- (?:\s+$Inline|\s+$Sparse|\s+$Attribute)*
+ (?:\s+$Inline|\s+$Sparse|\s+$Attribute|\s+$mods)*
}x;
$Declare = qr{(?:$Storage\s+)?$Type};
+ $Modifier = qr{(?:$Attribute|$Sparse|$mods)};
}
build_types();
@@ -329,7 +333,7 @@
$off++;
next;
}
- if (substr($line, $off, 2) eq $sanitise_quote) {
+ if (substr($line, $off, 2) eq '*/') {
$sanitise_quote = '';
substr($res, $off, 2, "$;$;");
$off++;
@@ -366,14 +370,14 @@
}
# The pathname on a #include may be surrounded by '<' and '>'.
- if ($res =~ /^.#\s*include\s+\<(.*)\>/) {
+ if ($res =~ /^.\s*\#\s*include\s+\<(.*)\>/) {
my $clean = 'X' x length($1);
$res =~ s@\<.*\>@<$clean>@;
# The whole of a #error is a string.
- } elsif ($res =~ /^.#\s*(?:error|warning)\s+(.*)\b/) {
+ } elsif ($res =~ /^.\s*\#\s*(?:error|warning)\s+(.*)\b/) {
my $clean = 'X' x length($1);
- $res =~ s@(#\s*(?:error|warning)\s+).*@$1$clean@;
+ $res =~ s@(\#\s*(?:error|warning)\s+).*@$1$clean@;
}
return $res;
@@ -715,7 +719,7 @@
print "DECLARE($1)\n" if ($dbg_values > 1);
$type = 'T';
- } elsif ($cur =~ /^(#\s*define\s*$Ident)(\(?)/o) {
+ } elsif ($cur =~ /^(\#\s*define\s*$Ident)(\(?)/o) {
print "DEFINE($1,$2)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
push(@av_paren_type, $type);
@@ -724,12 +728,12 @@
}
$type = 'E';
- } elsif ($cur =~ /^(#\s*undef\s*$Ident)/o) {
+ } elsif ($cur =~ /^(\#\s*(?:undef\s*$Ident|include\b))/o) {
print "UNDEF($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
push(@av_paren_type, $type);
- } elsif ($cur =~ /^(#\s*(?:ifdef|ifndef|if))/o) {
+ } elsif ($cur =~ /^(\#\s*(?:ifdef|ifndef|if))/o) {
print "PRE_START($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
@@ -737,7 +741,7 @@
push(@av_paren_type, $type);
$type = 'E';
- } elsif ($cur =~ /^(#\s*(?:else|elif))/o) {
+ } elsif ($cur =~ /^(\#\s*(?:else|elif))/o) {
print "PRE_RESTART($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
@@ -745,7 +749,7 @@
$type = 'E';
- } elsif ($cur =~ /^(#\s*(?:endif))/o) {
+ } elsif ($cur =~ /^(\#\s*(?:endif))/o) {
print "PRE_END($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
@@ -837,14 +841,26 @@
sub possible {
my ($possible, $line) = @_;
- #print "CHECK<$possible>\n";
+ print "CHECK<$possible> ($line)\n" if ($dbg_possible > 1);
if ($possible !~ /^(?:$Storage|$Type|DEFINE_\S+)$/ &&
$possible ne 'goto' && $possible ne 'return' &&
- $possible ne 'struct' && $possible ne 'enum' &&
$possible ne 'case' && $possible ne 'else' &&
- $possible ne 'typedef') {
- warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible);
- push(@typeList, $possible);
+ $possible ne 'asm' &&
+ $possible !~ /^(typedef|struct|enum)\b/) {
+ # Check for modifiers.
+ $possible =~ s/\s*$Storage\s*//g;
+ $possible =~ s/\s*$Sparse\s*//g;
+ if ($possible =~ /^\s*$/) {
+
+ } elsif ($possible =~ /\s/) {
+ $possible =~ s/\s*$Type\s*//g;
+ warn "MODIFIER: $possible ($line)\n" if ($dbg_possible);
+ push(@modifierList, $possible);
+
+ } else {
+ warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible);
+ push(@typeList, $possible);
+ }
build_types();
}
}
@@ -949,6 +965,7 @@
} else {
$realcnt=1+1;
}
+ $in_comment = 0;
# Guestimate if this is a continuing comment. Run
# the context looking for a comment "edge". If this
@@ -1117,7 +1134,9 @@
ERROR("trailing whitespace\n" . $herevet);
}
#80 column limit
- if ($line =~ /^\+/ && !($prevrawline=~/\/\*\*/) && $length > 80) {
+ if ($line =~ /^\+/ && $prevrawline !~ /\/\*\*/ &&
+ $rawline !~ /^.\s*\*\s*\@$Ident\s/ && $length > 80)
+ {
WARN("line over 80 characters\n" . $herecurr);
}
@@ -1159,18 +1178,20 @@
# Ignore functions being called
} elsif ($s =~ /^.\s*$Ident\s*\(/s) {
+ # declarations always start with types
+ } elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?((?:\s*$Ident)+)\b(?:\s+$Sparse)?\s*\**\s*(?:$Ident|\(\*[^\)]*\))\s*(?:;|=|,|\()/s) {
+ my $type = $1;
+ $type =~ s/\s+/ /g;
+ possible($type, "A:" . $s);
+
# definitions in global scope can only start with types
} elsif ($s =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b/s) {
- possible($1, $s);
-
- # declarations always start with types
- } elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:const\s+)?($Ident)\b(:?\s+$Sparse)?\s*\**\s*$Ident\s*(?:;|=|,)/s) {
- possible($1, $s);
+ possible($1, "B:" . $s);
}
# any (foo ... *) is a pointer cast, and foo is a type
while ($s =~ /\(($Ident)(?:\s+$Sparse)*\s*\*+\s*\)/sg) {
- possible($1, $s);
+ possible($1, "C:" . $s);
}
# Check for any sort of function declaration.
@@ -1184,9 +1205,9 @@
$ctx =~ s/\)[^\)]*$//;
for my $arg (split(/\s*,\s*/, $ctx)) {
- if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/ || $arg =~ /^($Ident)$/) {
+ if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/s || $arg =~ /^($Ident)$/s) {
- possible($1, $s);
+ possible($1, "D:" . $s);
}
}
}
@@ -1221,7 +1242,7 @@
# if/while/etc brace do not go on next line, unless defining a do while loop,
# or if that brace on the next line is for something else
- if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.#/) {
+ if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.\s*\#/) {
my $pre_ctx = "$1$2";
my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0);
@@ -1239,7 +1260,7 @@
if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
ERROR("that open brace { should be on the previous line\n" .
- "$here\n$ctx\n$lines[$ctx_ln - 1]");
+ "$here\n$ctx\n$lines[$ctx_ln - 1]\n");
}
if ($level == 0 && $pre_ctx !~ /}\s*while\s*\($/ &&
$ctx =~ /\)\s*\;\s*$/ &&
@@ -1248,7 +1269,7 @@
my ($nlength, $nindent) = line_stats($lines[$ctx_ln - 1]);
if ($nindent > $indent) {
WARN("trailing semicolon indicates no statements, indent implies otherwise\n" .
- "$here\n$ctx\n$lines[$ctx_ln - 1]");
+ "$here\n$ctx\n$lines[$ctx_ln - 1]\n");
}
}
}
@@ -1284,7 +1305,7 @@
#
# check for malformed paths in #include statements (uses RAW line)
- if ($rawline =~ m{^.#\s*include\s+[<"](.*)[">]}) {
+ if ($rawline =~ m{^.\s*\#\s*include\s+[<"](.*)[">]}) {
my $path = $1;
if ($path =~ m{//}) {
ERROR("malformed #include filename\n" .
@@ -1316,7 +1337,7 @@
}
# check for external initialisers.
- if ($line =~ /^.$Type\s*$Ident\s*=\s*(0|NULL|false)\s*;/) {
+ if ($line =~ /^.$Type\s*$Ident\s*(?:\s+$Modifier)*\s*=\s*(0|NULL|false)\s*;/) {
ERROR("do not initialise externals to 0 or NULL\n" .
$herecurr);
}
@@ -1330,6 +1351,7 @@
# make sense.
if ($line =~ /\btypedef\s/ &&
$line !~ /\btypedef\s+$Type\s+\(\s*\*?$Ident\s*\)\s*\(/ &&
+ $line !~ /\btypedef\s+$Type\s+$Ident\s*\(/ &&
$line !~ /\b__bitwise(?:__|)\b/) {
WARN("do not add new typedefs\n" . $herecurr);
}
@@ -1388,8 +1410,8 @@
# function brace can't be on same line, except for #defines of do while,
# or if closed on same line
- if (($line=~/$Type\s*[A-Za-z\d_]+\(.*\).*\s{/) and
- !($line=~/\#define.*do\s{/) and !($line=~/}/)) {
+ if (($line=~/$Type\s*$Ident\(.*\).*\s{/) and
+ !($line=~/\#\s*define.*do\s{/) and !($line=~/}/)) {
ERROR("open brace '{' following function declarations go on the next line\n" . $herecurr);
}
@@ -1416,10 +1438,10 @@
# cpp #define statements have non-optional spaces, ie
# if there is a space between the name and the open
# parenthesis it is simply not a parameter group.
- } elsif ($ctx_before =~ /^.\#\s*define\s*$/) {
+ } elsif ($ctx_before =~ /^.\s*\#\s*define\s*$/) {
# cpp #elif statement condition may start with a (
- } elsif ($ctx =~ /^.\#\s*elif\s*$/) {
+ } elsif ($ctx =~ /^.\s*\#\s*elif\s*$/) {
# If this whole things ends with a type its most
# likely a typedef for a function.
@@ -1625,13 +1647,14 @@
ERROR("space prohibited before that close square bracket ']'\n" . $herecurr);
}
-# check spacing on paretheses
+# check spacing on parentheses
if ($line =~ /\(\s/ && $line !~ /\(\s*(?:\\)?$/ &&
$line !~ /for\s*\(\s+;/) {
ERROR("space prohibited after that open parenthesis '('\n" . $herecurr);
}
if ($line =~ /(\s+)\)/ && $line !~ /^.\s*\)/ &&
- $line !~ /for\s*\(.*;\s+\)/) {
+ $line !~ /for\s*\(.*;\s+\)/ &&
+ $line !~ /:\s+\)/) {
ERROR("space prohibited before that close parenthesis ')'\n" . $herecurr);
}
@@ -1641,6 +1664,23 @@
WARN("labels should not be indented\n" . $herecurr);
}
+# Return is not a function.
+ if (defined($stat) && $stat =~ /^.\s*return(\s*)(\(.*);/s) {
+ my $spacing = $1;
+ my $value = $2;
+
+ # Flatten any parentheses and braces
+ while ($value =~ s/\([^\(\)]*\)/1/) {
+ }
+
+ if ($value =~ /^(?:$Ident|-?$Constant)$/) {
+ ERROR("return is not a function, parentheses are not required\n" . $herecurr);
+
+ } elsif ($spacing !~ /\s+/) {
+ ERROR("space required before the open parenthesis '('\n" . $herecurr);
+ }
+ }
+
# Need a space before open parenthesis after if, while etc
if ($line=~/\b(if|while|for|switch)\(/) {
ERROR("space required before the open parenthesis '('\n" . $herecurr);
@@ -1660,7 +1700,7 @@
$s =~ s/\n.*//g;
$s =~ s/$;//g; # Remove any comments
if (length($c) && $s !~ /^\s*({|;|)\s*\\*\s*$/ &&
- $c !~ /^.\#\s*if/)
+ $c !~ /^.\s*\#\s*if/)
{
ERROR("trailing statements should be on next line\n" . $herecurr);
}
@@ -1719,14 +1759,16 @@
# }
#no spaces allowed after \ in define
- if ($line=~/\#define.*\\\s$/) {
+ if ($line=~/\#\s*define.*\\\s$/) {
WARN("Whitepspace after \\ makes next lines useless\n" . $herecurr);
}
#warn if <asm/foo.h> is #included and <linux/foo.h> is available (uses RAW line)
- if ($tree && $rawline =~ m{^.\#\s*include\s*\<asm\/(.*)\.h\>}) {
- my $checkfile = "$root/include/linux/$1.h";
- if (-f $checkfile && $1 ne 'irq') {
+ if ($tree && $rawline =~ m{^.\s*\#\s*include\s*\<asm\/(.*)\.h\>}) {
+ my $checkfile = "include/linux/$1.h";
+ if (-f "$root/$checkfile" && $realfile ne $checkfile &&
+ $1 ne 'irq')
+ {
WARN("Use #include <linux/$1.h> instead of <asm/$1.h>\n" .
$herecurr);
}
@@ -1735,45 +1777,87 @@
# multi-statement macros should be enclosed in a do while loop, grab the
# first statement and ensure its the whole macro if its not enclosed
# in a known good container
- if ($prevline =~ /\#define.*\\/ &&
- $prevline !~/(?:do\s+{|\(\{|\{)/ &&
- $line !~ /(?:do\s+{|\(\{|\{)/ &&
- $line !~ /^.\s*$Declare\s/) {
- # Grab the first statement, if that is the entire macro
- # its ok. This may start either on the #define line
- # or the one below.
+ if ($line =~ /^.\s*\#\s*define\s*$Ident(\()?/) {
my $ln = $linenr;
my $cnt = $realcnt;
- my $off = 0;
+ my ($off, $dstat, $dcond, $rest);
+ my $ctx = '';
- # If the macro starts on the define line start
- # grabbing the statement after the identifier
- $prevline =~ m{^(.#\s*define\s*$Ident(?:\([^\)]*\))?\s*)(.*)\\\s*$};
- ##print "1<$1> 2<$2>\n";
- if (defined $2 && $2 ne '') {
- $off = length($1);
- $ln--;
- $cnt++;
- while ($lines[$ln - 1] =~ /^-/) {
- $ln--;
- $cnt++;
- }
+ my $args = defined($1);
+
+ # Find the end of the macro and limit our statement
+ # search to that.
+ while ($cnt > 0 && defined $lines[$ln - 1] &&
+ $lines[$ln - 1] =~ /^(?:-|..*\\$)/)
+ {
+ $ctx .= $rawlines[$ln - 1] . "\n";
+ $ln++;
+ $cnt--;
}
- my @ctx = ctx_statement($ln, $cnt, $off);
- my $ctx_ln = $ln + $#ctx + 1;
- my $ctx = join("\n", @ctx);
+ $ctx .= $rawlines[$ln - 1];
- # Pull in any empty extension lines.
- while ($ctx =~ /\\$/ &&
- $lines[$ctx_ln - 1] =~ /^.\s*(?:\\)?$/) {
- $ctx .= $lines[$ctx_ln - 1];
- $ctx_ln++;
+ ($dstat, $dcond, $ln, $cnt, $off) =
+ ctx_statement_block($linenr, $ln - $linenr + 1, 0);
+ #print "dstat<$dstat> dcond<$dcond> cnt<$cnt> off<$off>\n";
+ #print "LINE<$lines[$ln]> len<" . length($lines[$ln]) . "\n";
+
+ # Extract the remainder of the define (if any) and
+ # rip off surrounding spaces, and trailing \'s.
+ $rest = '';
+ if (defined $lines[$ln - 1] &&
+ $off > length($lines[$ln - 1]))
+ {
+ $ln++;
+ $cnt--;
+ $off = 0;
+ }
+ while ($cnt > 0) {
+ $rest .= substr($lines[$ln - 1], $off) . "\n";
+ $ln++;
+ $cnt--;
+ $off = 0;
+ }
+ $rest =~ s/\\\n.//g;
+ $rest =~ s/^\s*//s;
+ $rest =~ s/\s*$//s;
+
+ # Clean up the original statement.
+ if ($args) {
+ substr($dstat, 0, length($dcond), '');
+ } else {
+ $dstat =~ s/^.\s*\#\s*define\s+$Ident\s*//;
+ }
+ $dstat =~ s/\\\n.//g;
+ $dstat =~ s/^\s*//s;
+ $dstat =~ s/\s*$//s;
+
+ # Flatten any parentheses and braces
+ while ($dstat =~ s/\([^\(\)]*\)/1/) {
+ }
+ while ($dstat =~ s/\{[^\{\}]*\}/1/) {
}
- if ($ctx =~ /\\$/) {
- if ($ctx =~ /;/) {
+ my $exceptions = qr{
+ $Declare|
+ module_param_named|
+ MODULE_PARAM_DESC|
+ DECLARE_PER_CPU|
+ DEFINE_PER_CPU|
+ __typeof__\(
+ }x;
+ if ($rest ne '') {
+ if ($rest !~ /while\s*\(/ &&
+ $dstat !~ /$exceptions/)
+ {
ERROR("Macros with multiple statements should be enclosed in a do - while loop\n" . "$here\n$ctx\n");
- } else {
+ }
+
+ } elsif ($ctx !~ /;/) {
+ if ($dstat ne '' &&
+ $dstat !~ /^(?:$Ident|-?$Constant)$/ &&
+ $dstat !~ /$exceptions/ &&
+ $dstat =~ /$Operators/)
+ {
ERROR("Macros with complex values should be enclosed in parenthesis\n" . "$here\n$ctx\n");
}
}
@@ -1884,7 +1968,7 @@
# don't include deprecated include files (uses RAW line)
for my $inc (@dep_includes) {
- if ($rawline =~ m@\#\s*include\s*\<$inc>@) {
+ if ($rawline =~ m@^.\s*\#\s*include\s*\<$inc>@) {
ERROR("Don't use <$inc>: see Documentation/feature-removal-schedule.txt\n" . $herecurr);
}
}
@@ -1908,7 +1992,7 @@
}
# warn about #if 0
- if ($line =~ /^.#\s*if\s+0\b/) {
+ if ($line =~ /^.\s*\#\s*if\s+0\b/) {
CHK("if this code is redundant consider removing it\n" .
$herecurr);
}
@@ -1920,23 +2004,16 @@
WARN("kfree(NULL) is safe this check is probabally not required\n" . $hereprev);
}
}
-# check for needless usb_free_urb() checks
- if ($prevline =~ /\bif\s*\(([^\)]*)\)/) {
- my $expr = $1;
- if ($line =~ /\busb_free_urb\(\Q$expr\E\);/) {
- WARN("usb_free_urb(NULL) is safe this check is probabally not required\n" . $hereprev);
- }
- }
# warn about #ifdefs in C files
-# if ($line =~ /^.#\s*if(|n)def/ && ($realfile =~ /\.c$/)) {
+# if ($line =~ /^.\s*\#\s*if(|n)def/ && ($realfile =~ /\.c$/)) {
# print "#ifdef in C files should be avoided\n";
# print "$herecurr";
# $clean = 0;
# }
# warn about spacing in #ifdefs
- if ($line =~ /^.#\s*(ifdef|ifndef|elif)\s\s+/) {
+ if ($line =~ /^.\s*\#\s*(ifdef|ifndef|elif)\s\s+/) {
ERROR("exactly one space required after that #$1\n" . $herecurr);
}
@@ -1955,7 +2032,7 @@
}
}
# check of hardware specific defines
- if ($line =~ m@^.#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@ && $realfile !~ m@include/asm-@) {
+ if ($line =~ m@^.\s*\#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@ && $realfile !~ m@include/asm-@) {
CHK("architecture specific defines should be avoided\n" . $herecurr);
}
@@ -1973,15 +2050,18 @@
# check for new externs in .c files.
if ($realfile =~ /\.c$/ && defined $stat &&
- $stat =~ /^.\s*(?:extern\s+)?$Type\s+$Ident(\s*)\(/s)
+ $stat =~ /^.\s*(?:extern\s+)?$Type\s+($Ident)(\s*)\(/s)
{
- my $paren_space = $1;
+ my $function_name = $1;
+ my $paren_space = $2;
my $s = $stat;
if (defined $cond) {
substr($s, 0, length($cond), '');
}
- if ($s =~ /^\s*;/) {
+ if ($s =~ /^\s*;/ &&
+ $function_name ne 'uninitialized_var')
+ {
WARN("externs should be avoided in .c files\n" . $herecurr);
}
@@ -2030,8 +2110,8 @@
# use of NR_CPUS is usually wrong
# ignore definitions of NR_CPUS and usage to define arrays as likely right
if ($line =~ /\bNR_CPUS\b/ &&
- $line !~ /^.#\s*if\b.*\bNR_CPUS\b/ &&
- $line !~ /^.#\s*define\b.*\bNR_CPUS\b/ &&
+ $line !~ /^.\s*\s*#\s*if\b.*\bNR_CPUS\b/ &&
+ $line !~ /^.\s*\s*#\s*define\b.*\bNR_CPUS\b/ &&
$line !~ /^.\s*$Declare\s.*\[[^\]]*NR_CPUS[^\]]*\]/ &&
$line !~ /\[[^\]]*\.\.\.[^\]]*NR_CPUS[^\]]*\]/ &&
$line !~ /\[[^\]]*NR_CPUS[^\]]*\.\.\.[^\]]*\]/)
diff --git a/scripts/decodecode b/scripts/decodecode
old mode 100644
new mode 100755
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 508c589..a07f91a 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -467,6 +467,25 @@
release_file(info->hdr, info->size);
}
+static int ignore_undef_symbol(struct elf_info *info, const char *symname)
+{
+ /* ignore __this_module, it will be resolved shortly */
+ if (strcmp(symname, MODULE_SYMBOL_PREFIX "__this_module") == 0)
+ return 1;
+ /* ignore global offset table */
+ if (strcmp(symname, "_GLOBAL_OFFSET_TABLE_") == 0)
+ return 1;
+ if (info->hdr->e_machine == EM_PPC)
+ /* Special register function linked on all modules during final link of .ko */
+ if (strncmp(symname, "_restgpr_", sizeof("_restgpr_") - 1) == 0 ||
+ strncmp(symname, "_savegpr_", sizeof("_savegpr_") - 1) == 0 ||
+ strncmp(symname, "_rest32gpr_", sizeof("_rest32gpr_") - 1) == 0 ||
+ strncmp(symname, "_save32gpr_", sizeof("_save32gpr_") - 1) == 0)
+ return 1;
+ /* Do not ignore this symbol */
+ return 0;
+}
+
#define CRC_PFX MODULE_SYMBOL_PREFIX "__crc_"
#define KSYMTAB_PFX MODULE_SYMBOL_PREFIX "__ksymtab_"
@@ -493,11 +512,7 @@
if (ELF_ST_BIND(sym->st_info) != STB_GLOBAL &&
ELF_ST_BIND(sym->st_info) != STB_WEAK)
break;
- /* ignore global offset table */
- if (strcmp(symname, "_GLOBAL_OFFSET_TABLE_") == 0)
- break;
- /* ignore __this_module, it will be resolved shortly */
- if (strcmp(symname, MODULE_SYMBOL_PREFIX "__this_module") == 0)
+ if (ignore_undef_symbol(info, symname))
break;
/* cope with newer glibc (2.3.4 or higher) STT_ definition in elf.h */
#if defined(STT_REGISTER) || defined(STT_SPARC_REGISTER)
diff --git a/security/commoncap.c b/security/commoncap.c
index 5edabc7..33d3433 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -103,10 +103,16 @@
return (cap_capable(current, CAP_SETPCAP) != 0);
}
+static inline int cap_limit_ptraced_target(void) { return 1; }
+
#else /* ie., ndef CONFIG_SECURITY_FILE_CAPABILITIES */
static inline int cap_block_setpcap(struct task_struct *t) { return 0; }
static inline int cap_inh_is_capped(void) { return 1; }
+static inline int cap_limit_ptraced_target(void)
+{
+ return !capable(CAP_SETPCAP);
+}
#endif /* def CONFIG_SECURITY_FILE_CAPABILITIES */
@@ -342,9 +348,10 @@
bprm->e_uid = current->uid;
bprm->e_gid = current->gid;
}
- if (!capable (CAP_SETPCAP)) {
- new_permitted = cap_intersect (new_permitted,
- current->cap_permitted);
+ if (cap_limit_ptraced_target()) {
+ new_permitted =
+ cap_intersect(new_permitted,
+ current->cap_permitted);
}
}
}
diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index 4ea5836..ddd92ce 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -49,10 +49,14 @@
spinlock_t lock;
};
+static inline struct dev_cgroup *css_to_devcgroup(struct cgroup_subsys_state *s)
+{
+ return container_of(s, struct dev_cgroup, css);
+}
+
static inline struct dev_cgroup *cgroup_to_devcgroup(struct cgroup *cgroup)
{
- return container_of(cgroup_subsys_state(cgroup, devices_subsys_id),
- struct dev_cgroup, css);
+ return css_to_devcgroup(cgroup_subsys_state(cgroup, devices_subsys_id));
}
struct cgroup_subsys devices_subsys;
@@ -102,7 +106,7 @@
static int dev_whitelist_add(struct dev_cgroup *dev_cgroup,
struct dev_whitelist_item *wh)
{
- struct dev_whitelist_item *whcopy;
+ struct dev_whitelist_item *whcopy, *walk;
whcopy = kmalloc(sizeof(*whcopy), GFP_KERNEL);
if (!whcopy)
@@ -110,7 +114,21 @@
memcpy(whcopy, wh, sizeof(*whcopy));
spin_lock(&dev_cgroup->lock);
- list_add_tail(&whcopy->list, &dev_cgroup->whitelist);
+ list_for_each_entry(walk, &dev_cgroup->whitelist, list) {
+ if (walk->type != wh->type)
+ continue;
+ if (walk->major != wh->major)
+ continue;
+ if (walk->minor != wh->minor)
+ continue;
+
+ walk->access |= wh->access;
+ kfree(whcopy);
+ whcopy = NULL;
+ }
+
+ if (whcopy != NULL)
+ list_add_tail(&whcopy->list, &dev_cgroup->whitelist);
spin_unlock(&dev_cgroup->lock);
return 0;
}
@@ -204,7 +222,7 @@
#define DEVCG_DENY 2
#define DEVCG_LIST 3
-#define MAJMINLEN 10
+#define MAJMINLEN 13
#define ACCLEN 4
static void set_access(char *acc, short access)
@@ -236,7 +254,7 @@
if (m == ~0)
sprintf(str, "*");
else
- snprintf(str, MAJMINLEN, "%d", m);
+ snprintf(str, MAJMINLEN, "%u", m);
}
static int devcgroup_seq_read(struct cgroup *cgroup, struct cftype *cft,
@@ -282,7 +300,7 @@
continue;
if (whitem->minor != ~0 && whitem->minor != refwh->minor)
continue;
- if (refwh->access & (~(whitem->access | ACC_MASK)))
+ if (refwh->access & (~whitem->access))
continue;
return 1;
}
@@ -364,6 +382,8 @@
case 'a':
wh.type = DEV_ALL;
wh.access = ACC_MASK;
+ wh.major = ~0;
+ wh.minor = ~0;
goto handle;
case 'b':
wh.type = DEV_BLOCK;
@@ -502,7 +522,6 @@
int devcgroup_inode_permission(struct inode *inode, int mask)
{
- struct cgroup *cgroup;
struct dev_cgroup *dev_cgroup;
struct dev_whitelist_item *wh;
@@ -511,8 +530,8 @@
return 0;
if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode))
return 0;
- cgroup = task_cgroup(current, devices_subsys.subsys_id);
- dev_cgroup = cgroup_to_devcgroup(cgroup);
+ dev_cgroup = css_to_devcgroup(task_subsys_state(current,
+ devices_subsys_id));
if (!dev_cgroup)
return 0;
@@ -543,12 +562,11 @@
int devcgroup_inode_mknod(int mode, dev_t dev)
{
- struct cgroup *cgroup;
struct dev_cgroup *dev_cgroup;
struct dev_whitelist_item *wh;
- cgroup = task_cgroup(current, devices_subsys.subsys_id);
- dev_cgroup = cgroup_to_devcgroup(cgroup);
+ dev_cgroup = css_to_devcgroup(task_subsys_state(current,
+ devices_subsys_id));
if (!dev_cgroup)
return 0;
diff --git a/security/dummy.c b/security/dummy.c
index f50c6c3..b891688 100644
--- a/security/dummy.c
+++ b/security/dummy.c
@@ -27,6 +27,8 @@
#include <linux/hugetlb.h>
#include <linux/ptrace.h>
#include <linux/file.h>
+#include <linux/prctl.h>
+#include <linux/securebits.h>
static int dummy_ptrace (struct task_struct *parent, struct task_struct *child)
{
@@ -607,7 +609,27 @@
static int dummy_task_prctl (int option, unsigned long arg2, unsigned long arg3,
unsigned long arg4, unsigned long arg5, long *rc_p)
{
- return 0;
+ switch (option) {
+ case PR_CAPBSET_READ:
+ *rc_p = (cap_valid(arg2) ? 1 : -EINVAL);
+ break;
+ case PR_GET_KEEPCAPS:
+ *rc_p = issecure(SECURE_KEEP_CAPS);
+ break;
+ case PR_SET_KEEPCAPS:
+ if (arg2 > 1)
+ *rc_p = -EINVAL;
+ else if (arg2)
+ current->securebits |= issecure_mask(SECURE_KEEP_CAPS);
+ else
+ current->securebits &=
+ ~issecure_mask(SECURE_KEEP_CAPS);
+ break;
+ default:
+ return 0;
+ }
+
+ return 1;
}
static void dummy_task_reparent_to_init (struct task_struct *p)
diff --git a/security/keys/internal.h b/security/keys/internal.h
index 8c05587..b39f5c2 100644
--- a/security/keys/internal.h
+++ b/security/keys/internal.h
@@ -78,7 +78,6 @@
extern struct rb_root key_serial_tree;
extern spinlock_t key_serial_lock;
-extern struct semaphore key_alloc_sem;
extern struct mutex key_construction_mutex;
extern wait_queue_head_t request_key_conswq;
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index b5c8f92..4a09293 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -1881,6 +1881,18 @@
final = sbsp->smk_default;
/*
+ * If this is the root inode the superblock
+ * may be in the process of initialization.
+ * If that is the case use the root value out
+ * of the superblock.
+ */
+ if (opt_dentry->d_parent == opt_dentry) {
+ isp->smk_inode = sbsp->smk_root;
+ isp->smk_flags |= SMK_INODE_INSTANT;
+ goto unlockandout;
+ }
+
+ /*
* This is pretty hackish.
* Casey says that we shouldn't have to do
* file system specific code, but it does help
diff --git a/sound/isa/sb/sb_mixer.c b/sound/isa/sb/sb_mixer.c
index 91d1422..73d4572 100644
--- a/sound/isa/sb/sb_mixer.c
+++ b/sound/isa/sb/sb_mixer.c
@@ -925,7 +925,7 @@
static void save_mixer(struct snd_sb *chip, unsigned char *regs, int num_regs)
{
unsigned char *val = chip->saved_regs;
- snd_assert(num_regs > ARRAY_SIZE(chip->saved_regs), return);
+ snd_assert(num_regs <= ARRAY_SIZE(chip->saved_regs), return);
for (; num_regs; num_regs--)
*val++ = snd_sbmixer_read(chip, *regs++);
}
@@ -933,7 +933,7 @@
static void restore_mixer(struct snd_sb *chip, unsigned char *regs, int num_regs)
{
unsigned char *val = chip->saved_regs;
- snd_assert(num_regs > ARRAY_SIZE(chip->saved_regs), return);
+ snd_assert(num_regs <= ARRAY_SIZE(chip->saved_regs), return);
for (; num_regs; num_regs--)
snd_sbmixer_write(chip, *regs++, *val++);
}
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 2da8981..1292dce 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -1971,6 +1971,9 @@
val = ac97->regs[AC97_AD_MISC];
ucontrol->value.integer.value[0] = !(val & AC97_AD198X_LOSEL);
+ if (ac97->spec.ad18xx.lo_as_master)
+ ucontrol->value.integer.value[0] =
+ !ucontrol->value.integer.value[0];
return 0;
}
@@ -1979,8 +1982,10 @@
struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
unsigned short val;
- val = !ucontrol->value.integer.value[0]
- ? (AC97_AD198X_LOSEL | AC97_AD198X_HPSEL) : 0;
+ val = !ucontrol->value.integer.value[0];
+ if (ac97->spec.ad18xx.lo_as_master)
+ val = !val;
+ val = val ? (AC97_AD198X_LOSEL | AC97_AD198X_HPSEL) : 0;
return snd_ac97_update_bits(ac97, AC97_AD_MISC,
AC97_AD198X_LOSEL | AC97_AD198X_HPSEL, val);
}
@@ -2031,7 +2036,7 @@
{
unsigned short val = 0;
/* clear LODIS if shared jack is to be used for Surround out */
- if (is_shared_linein(ac97))
+ if (!ac97->spec.ad18xx.lo_as_master && is_shared_linein(ac97))
val |= (1 << 12);
/* clear CLDIS if shared jack is to be used for C/LFE out */
if (is_shared_micin(ac97))
@@ -2067,9 +2072,13 @@
static int patch_ad1888_specific(struct snd_ac97 *ac97)
{
- /* rename 0x04 as "Master" and 0x02 as "Master Surround" */
- snd_ac97_rename_vol_ctl(ac97, "Master Playback", "Master Surround Playback");
- snd_ac97_rename_vol_ctl(ac97, "Headphone Playback", "Master Playback");
+ if (!ac97->spec.ad18xx.lo_as_master) {
+ /* rename 0x04 as "Master" and 0x02 as "Master Surround" */
+ snd_ac97_rename_vol_ctl(ac97, "Master Playback",
+ "Master Surround Playback");
+ snd_ac97_rename_vol_ctl(ac97, "Headphone Playback",
+ "Master Playback");
+ }
return patch_build_controls(ac97, snd_ac97_ad1888_controls, ARRAY_SIZE(snd_ac97_ad1888_controls));
}
@@ -2088,16 +2097,27 @@
patch_ad1881(ac97);
ac97->build_ops = &patch_ad1888_build_ops;
- /* Switch FRONT/SURROUND LINE-OUT/HP-OUT default connection */
- /* it seems that most vendors connect line-out connector to headphone out of AC'97 */
+
+ /*
+ * LO can be used as a real line-out on some devices,
+ * and we need to revert the front/surround mixer switches
+ */
+ if (ac97->subsystem_vendor == 0x1043 &&
+ ac97->subsystem_device == 0x1193) /* ASUS A9T laptop */
+ ac97->spec.ad18xx.lo_as_master = 1;
+
+ misc = snd_ac97_read(ac97, AC97_AD_MISC);
/* AD-compatible mode */
/* Stereo mutes enabled */
- misc = snd_ac97_read(ac97, AC97_AD_MISC);
- snd_ac97_write_cache(ac97, AC97_AD_MISC, misc |
- AC97_AD198X_LOSEL |
- AC97_AD198X_HPSEL |
- AC97_AD198X_MSPLT |
- AC97_AD198X_AC97NC);
+ misc |= AC97_AD198X_MSPLT | AC97_AD198X_AC97NC;
+ if (!ac97->spec.ad18xx.lo_as_master)
+ /* Switch FRONT/SURROUND LINE-OUT/HP-OUT default connection */
+ /* it seems that most vendors connect line-out connector to
+ * headphone out of AC'97
+ */
+ misc |= AC97_AD198X_LOSEL | AC97_AD198X_HPSEL;
+
+ snd_ac97_write_cache(ac97, AC97_AD_MISC, misc);
ac97->flags |= AC97_STEREO_MUTES;
return 0;
}
diff --git a/sound/pci/aw2/aw2-alsa.c b/sound/pci/aw2/aw2-alsa.c
index 56f87cd..3f00ddf 100644
--- a/sound/pci/aw2/aw2-alsa.c
+++ b/sound/pci/aw2/aw2-alsa.c
@@ -316,6 +316,8 @@
return -ENOMEM;
}
+ /* (2) initialization of the chip hardware */
+ snd_aw2_saa7146_setup(&chip->saa7146, chip->iobase_virt);
if (request_irq(pci->irq, snd_aw2_saa7146_interrupt,
IRQF_SHARED, "Audiowerk2", chip)) {
@@ -329,8 +331,6 @@
}
chip->irq = pci->irq;
- /* (2) initialization of the chip hardware */
- snd_aw2_saa7146_setup(&chip->saa7146, chip->iobase_virt);
err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
if (err < 0) {
free_irq(chip->irq, (void *)chip);
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index abde5b9..548c9cc 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -1818,13 +1818,6 @@
}
emu->port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_SHARED,
- "EMU10K1", emu)) {
- err = -EBUSY;
- goto error;
- }
- emu->irq = pci->irq;
-
emu->max_cache_pages = max_cache_bytes >> PAGE_SHIFT;
if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci),
32 * 1024, &emu->ptb_pages) < 0) {
@@ -1887,6 +1880,14 @@
emu->fx8010.etram_pages.area = NULL;
emu->fx8010.etram_pages.bytes = 0;
+ /* irq handler must be registered after I/O ports are activated */
+ if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_SHARED,
+ "EMU10K1", emu)) {
+ err = -EBUSY;
+ goto error;
+ }
+ emu->irq = pci->irq;
+
/*
* Init to 0x02109204 :
* Clock accuracy = 0 (1000ppm)
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index ff1b922..a99e86d 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -3644,33 +3644,17 @@
{ } /* end */
};
-static struct hda_input_mux ad1884a_mobile_capture_source = {
- .num_items = 2,
- .items = {
- { "Mic", 0x1 }, /* port-C */
- { "Mix", 0x3 },
- },
-};
-
static struct snd_kcontrol_new ad1884a_mobile_mixers[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT),
HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x20, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x01, HDA_INPUT),
HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x03, HDA_INPUT),
HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x03, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost", 0x15, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Capture Volume", 0x14, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Internal Mic Capture Volume", 0x15, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Capture Switch", 0x0c, 0x0, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
- .info = ad198x_mux_enum_info,
- .get = ad198x_mux_enum_get,
- .put = ad198x_mux_enum_put,
- },
{ } /* end */
};
@@ -3687,14 +3671,31 @@
present ? 0x00 : 0x02);
}
+/* switch to external mic if plugged */
+static void ad1884a_hp_automic(struct hda_codec *codec)
+{
+ unsigned int present;
+
+ present = snd_hda_codec_read(codec, 0x14, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ snd_hda_codec_write(codec, 0x0c, 0, AC_VERB_SET_CONNECT_SEL,
+ present ? 0 : 1);
+}
+
#define AD1884A_HP_EVENT 0x37
+#define AD1884A_MIC_EVENT 0x36
/* unsolicited event for HP jack sensing */
static void ad1884a_hp_unsol_event(struct hda_codec *codec, unsigned int res)
{
- if ((res >> 26) != AD1884A_HP_EVENT)
- return;
- ad1884a_hp_automute(codec);
+ switch (res >> 26) {
+ case AD1884A_HP_EVENT:
+ ad1884a_hp_automute(codec);
+ break;
+ case AD1884A_MIC_EVENT:
+ ad1884a_hp_automic(codec);
+ break;
+ }
}
/* initialize jack-sensing, too */
@@ -3702,6 +3703,7 @@
{
ad198x_init(codec);
ad1884a_hp_automute(codec);
+ ad1884a_hp_automic(codec);
return 0;
}
@@ -3715,10 +3717,15 @@
/* Port-F pin */
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Port-C pin - internal mic-in */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
/* analog mix */
{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
/* unsolicited event for pin-sense */
{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
{ } /* end */
};
@@ -3878,7 +3885,6 @@
spec->mixers[0] = ad1884a_mobile_mixers;
spec->init_verbs[spec->num_init_verbs++] = ad1884a_laptop_verbs;
spec->multiout.dig_out_nid = 0;
- spec->input_mux = &ad1884a_mobile_capture_source;
codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
codec->patch_ops.init = ad1884a_hp_init;
break;
diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c
index c73ce07..6ef57fb 100644
--- a/sound/pci/hda/patch_cmedia.c
+++ b/sound/pci/hda/patch_cmedia.c
@@ -611,6 +611,7 @@
static struct snd_pci_quirk cmi9880_cfg_tbl[] = {
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", CMI_FULL_DIG),
+ SND_PCI_QUIRK(0x1854, 0x002b, "LG LS75", CMI_MINIMAL),
SND_PCI_QUIRK(0x1854, 0x0032, "LG", CMI_FULL_DIG),
{} /* terminator */
};
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 8f31247..b0a2a26 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -942,7 +942,6 @@
AC_VERB_SET_UNSOLICITED_ENABLE,
AC_USRSP_EN | ALC880_HP_EVENT);
spec->unsol_event = alc_sku_unsol_event;
- spec->init_hook = alc_sku_automute;
}
/*
@@ -8643,6 +8642,7 @@
{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {}
};
/* mute/unmute internal speaker according to the hp jack and mute state */
@@ -10513,6 +10513,7 @@
SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
SND_PCI_QUIRK(0x1179, 0xff10, "TOSHIBA A205", ALC268_TOSHIBA),
SND_PCI_QUIRK(0x1179, 0xff50, "TOSHIBA A305", ALC268_TOSHIBA),
+ SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA),
SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER),
SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1),
SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c
index cc0cdda..6facac5 100644
--- a/sound/pci/oxygen/oxygen_mixer.c
+++ b/sound/pci/oxygen/oxygen_mixer.c
@@ -936,11 +936,13 @@
for (i = 0; i < count; ++i) {
template = controls[i];
- err = chip->model->control_filter(&template);
- if (err < 0)
- return err;
- if (err == 1)
- continue;
+ if (chip->model->control_filter) {
+ err = chip->model->control_filter(&template);
+ if (err < 0)
+ return err;
+ if (err == 1)
+ continue;
+ }
if (!strcmp(template.name, "Master Playback Volume") &&
chip->model->dac_tlv) {
template.tlv.p = chip->model->dac_tlv;
diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c
index 4232fd7..4458908 100644
--- a/virt/kvm/ioapic.c
+++ b/virt/kvm/ioapic.c
@@ -45,7 +45,7 @@
#else
#define ioapic_debug(fmt, arg...)
#endif
-static void ioapic_deliver(struct kvm_ioapic *vioapic, int irq);
+static int ioapic_deliver(struct kvm_ioapic *vioapic, int irq);
static unsigned long ioapic_read_indirect(struct kvm_ioapic *ioapic,
unsigned long addr,
@@ -89,8 +89,8 @@
pent = &ioapic->redirtbl[idx];
if (!pent->fields.mask) {
- ioapic_deliver(ioapic, idx);
- if (pent->fields.trig_mode == IOAPIC_LEVEL_TRIG)
+ int injected = ioapic_deliver(ioapic, idx);
+ if (injected && pent->fields.trig_mode == IOAPIC_LEVEL_TRIG)
pent->fields.remote_irr = 1;
}
if (!pent->fields.trig_mode)
@@ -133,7 +133,7 @@
}
}
-static void ioapic_inj_irq(struct kvm_ioapic *ioapic,
+static int ioapic_inj_irq(struct kvm_ioapic *ioapic,
struct kvm_vcpu *vcpu,
u8 vector, u8 trig_mode, u8 delivery_mode)
{
@@ -143,7 +143,7 @@
ASSERT((delivery_mode == IOAPIC_FIXED) ||
(delivery_mode == IOAPIC_LOWEST_PRIORITY));
- kvm_apic_set_irq(vcpu, vector, trig_mode);
+ return kvm_apic_set_irq(vcpu, vector, trig_mode);
}
static u32 ioapic_get_delivery_bitmask(struct kvm_ioapic *ioapic, u8 dest,
@@ -186,7 +186,7 @@
return mask;
}
-static void ioapic_deliver(struct kvm_ioapic *ioapic, int irq)
+static int ioapic_deliver(struct kvm_ioapic *ioapic, int irq)
{
u8 dest = ioapic->redirtbl[irq].fields.dest_id;
u8 dest_mode = ioapic->redirtbl[irq].fields.dest_mode;
@@ -195,7 +195,7 @@
u8 trig_mode = ioapic->redirtbl[irq].fields.trig_mode;
u32 deliver_bitmask;
struct kvm_vcpu *vcpu;
- int vcpu_id;
+ int vcpu_id, r = 0;
ioapic_debug("dest=%x dest_mode=%x delivery_mode=%x "
"vector=%x trig_mode=%x\n",
@@ -204,7 +204,7 @@
deliver_bitmask = ioapic_get_delivery_bitmask(ioapic, dest, dest_mode);
if (!deliver_bitmask) {
ioapic_debug("no target on destination\n");
- return;
+ return 0;
}
switch (delivery_mode) {
@@ -216,7 +216,7 @@
vcpu = ioapic->kvm->vcpus[0];
#endif
if (vcpu != NULL)
- ioapic_inj_irq(ioapic, vcpu, vector,
+ r = ioapic_inj_irq(ioapic, vcpu, vector,
trig_mode, delivery_mode);
else
ioapic_debug("null lowest prio vcpu: "
@@ -234,7 +234,7 @@
deliver_bitmask &= ~(1 << vcpu_id);
vcpu = ioapic->kvm->vcpus[vcpu_id];
if (vcpu) {
- ioapic_inj_irq(ioapic, vcpu, vector,
+ r = ioapic_inj_irq(ioapic, vcpu, vector,
trig_mode, delivery_mode);
}
}
@@ -246,6 +246,7 @@
delivery_mode);
break;
}
+ return r;
}
void kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level)
@@ -268,35 +269,26 @@
}
}
-static int get_eoi_gsi(struct kvm_ioapic *ioapic, int vector)
+static void __kvm_ioapic_update_eoi(struct kvm_ioapic *ioapic, int gsi)
{
- int i;
-
- for (i = 0; i < IOAPIC_NUM_PINS; i++)
- if (ioapic->redirtbl[i].fields.vector == vector)
- return i;
- return -1;
-}
-
-void kvm_ioapic_update_eoi(struct kvm *kvm, int vector)
-{
- struct kvm_ioapic *ioapic = kvm->arch.vioapic;
union ioapic_redir_entry *ent;
- int gsi;
-
- gsi = get_eoi_gsi(ioapic, vector);
- if (gsi == -1) {
- printk(KERN_WARNING "Can't find redir item for %d EOI\n",
- vector);
- return;
- }
ent = &ioapic->redirtbl[gsi];
ASSERT(ent->fields.trig_mode == IOAPIC_LEVEL_TRIG);
ent->fields.remote_irr = 0;
if (!ent->fields.mask && (ioapic->irr & (1 << gsi)))
- ioapic_deliver(ioapic, gsi);
+ ioapic_service(ioapic, gsi);
+}
+
+void kvm_ioapic_update_eoi(struct kvm *kvm, int vector)
+{
+ struct kvm_ioapic *ioapic = kvm->arch.vioapic;
+ int i;
+
+ for (i = 0; i < IOAPIC_NUM_PINS; i++)
+ if (ioapic->redirtbl[i].fields.vector == vector)
+ __kvm_ioapic_update_eoi(ioapic, i);
}
static int ioapic_in_range(struct kvm_io_device *this, gpa_t addr)