tulip: convert to use netdev_for_each_mc_addr
also bug in de2104x.c was corrected:
for (i = 0; i < 32; i++) loop should be outside mc_list iteration.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 534afbd..95b38d8 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -330,8 +330,8 @@
static void dmfe_descriptor_init(struct dmfe_board_info *, unsigned long);
static void allocate_rx_buffer(struct dmfe_board_info *);
static void update_cr6(u32, unsigned long);
-static void send_filter_frame(struct DEVICE * ,int);
-static void dm9132_id_table(struct DEVICE * ,int);
+static void send_filter_frame(struct DEVICE *);
+static void dm9132_id_table(struct DEVICE *);
static u16 phy_read(unsigned long, u8, u8, u32);
static void phy_write(unsigned long, u8, u8, u16, u32);
static void phy_write_1bit(unsigned long, u32);
@@ -658,9 +658,9 @@
/* Send setup frame */
if (db->chip_id == PCI_DM9132_ID)
- dm9132_id_table(dev, netdev_mc_count(dev)); /* DM9132 */
+ dm9132_id_table(dev); /* DM9132 */
else
- send_filter_frame(dev, netdev_mc_count(dev)); /* DM9102/DM9102A */
+ send_filter_frame(dev); /* DM9102/DM9102A */
/* Init CR7, interrupt active bit */
db->cr7_data = CR7_DEFAULT;
@@ -1075,9 +1075,9 @@
DMFE_DBUG(0, "Set multicast address", mc_count);
if (db->chip_id == PCI_DM9132_ID)
- dm9132_id_table(dev, mc_count); /* DM9132 */
+ dm9132_id_table(dev); /* DM9132 */
else
- send_filter_frame(dev, mc_count); /* DM9102/DM9102A */
+ send_filter_frame(dev); /* DM9102/DM9102A */
spin_unlock_irqrestore(&db->lock, flags);
}
@@ -1452,7 +1452,7 @@
* This setup frame initilize DM910X address filter mode
*/
-static void dm9132_id_table(struct DEVICE *dev, int mc_cnt)
+static void dm9132_id_table(struct DEVICE *dev)
{
struct dev_mc_list *mcptr;
u16 * addrptr;
@@ -1472,15 +1472,14 @@
ioaddr += 4;
/* Clear Hash Table */
- for (i = 0; i < 4; i++)
- hash_table[i] = 0x0;
+ memset(hash_table, 0, sizeof(hash_table));
/* broadcast address */
hash_table[3] = 0x8000;
/* the multicast address in Hash Table : 64 bits */
- for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
- hash_val = cal_CRC( (char *) mcptr->dmi_addr, 6, 0) & 0x3f;
+ netdev_for_each_mc_addr(mcptr, dev) {
+ hash_val = cal_CRC((char *) mcptr->dmi_addr, 6, 0) & 0x3f;
hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
}
@@ -1495,7 +1494,7 @@
* This setup frame initilize DM910X address filter mode
*/
-static void send_filter_frame(struct DEVICE *dev, int mc_cnt)
+static void send_filter_frame(struct DEVICE *dev)
{
struct dmfe_board_info *db = netdev_priv(dev);
struct dev_mc_list *mcptr;
@@ -1521,14 +1520,14 @@
*suptr++ = 0xffff;
/* fit the multicast address */
- for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+ netdev_for_each_mc_addr(mcptr, dev) {
addrptr = (u16 *) mcptr->dmi_addr;
*suptr++ = addrptr[0];
*suptr++ = addrptr[1];
*suptr++ = addrptr[2];
}
- for (; i<14; i++) {
+ for (i = netdev_mc_count(dev); i < 14; i++) {
*suptr++ = 0xffff;
*suptr++ = 0xffff;
*suptr++ = 0xffff;