drivers/remoteproc/ste_modem_rproc.c - kernel/msm-4.9 - Gitiles

 /*
  * Copyright (C) ST-Ericsson AB 2012
  * Author: Sjur Brændeland <sjur.brandeland@stericsson.com>
  * License terms:  GNU General Public License (GPL), version 2
  */

 #include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <linux/remoteproc.h>
 #include <linux/ste_modem_shm.h>
 #include "remoteproc_internal.h"

 #define SPROC_FW_SIZE (50 * 4096)
 #define SPROC_MAX_TOC_ENTRIES 32
 #define SPROC_MAX_NOTIFY_ID 14
 #define SPROC_RESOURCE_NAME "rsc-table"
 #define SPROC_MODEM_NAME "ste-modem"
 #define SPROC_MODEM_FIRMWARE SPROC_MODEM_NAME "-fw.bin"

 #define sproc_dbg(sproc, fmt, ...) \
 	dev_dbg(&sproc->mdev->pdev.dev, fmt, ##__VA_ARGS__)
 #define sproc_err(sproc, fmt, ...) \
 	dev_err(&sproc->mdev->pdev.dev, fmt, ##__VA_ARGS__)

 /* STE-modem control structure */
 struct sproc {
 	struct rproc *rproc;
 	struct ste_modem_device *mdev;
 	int error;
 	void *fw_addr;
 	size_t fw_size;
 	dma_addr_t fw_dma_addr;
 };

 /* STE-Modem firmware entry */
 struct ste_toc_entry {
 	__le32 start;
 	__le32 size;
 	__le32 flags;
 	__le32 entry_point;
 	__le32 load_addr;
 	char name[12];
 };

 /*
  * The Table Of Content is located at the start of the firmware image and
  * at offset zero in the shared memory region. The resource table typically
  * contains the initial boot image (boot strap) and other information elements
  * such as remoteproc resource table. Each entry is identified by a unique
  * name.
  */
 struct ste_toc {
 	struct ste_toc_entry table[SPROC_MAX_TOC_ENTRIES];
 };

 /* Loads the firmware to shared memory. */
 static int sproc_load_segments(struct rproc *rproc, const struct firmware *fw)
 {
 	struct sproc *sproc = rproc->priv;

 	memcpy(sproc->fw_addr, fw->data, fw->size);

 	return 0;
 }

 /* Find the entry for resource table in the Table of Content */
 static const struct ste_toc_entry *sproc_find_rsc_entry(const void *data)
 {
 	int i;
 	const struct ste_toc *toc;
 	toc = data;

 	/* Search the table for the resource table */
 	for (i = 0; i < SPROC_MAX_TOC_ENTRIES &&
 		    toc->table[i].start != 0xffffffff; i++) {
 		if (!strncmp(toc->table[i].name, SPROC_RESOURCE_NAME,
 			     sizeof(toc->table[i].name)))
 			return &toc->table[i];
 	}

 	return NULL;
 }

 /* Find the resource table inside the remote processor's firmware. */
 static struct resource_table *
 sproc_find_rsc_table(struct rproc *rproc, const struct firmware *fw,
 		     int *tablesz)
 {
 	struct sproc *sproc = rproc->priv;
 	struct resource_table *table;
 	const struct ste_toc_entry *entry;

 	if (!fw)
 		return NULL;

 	entry = sproc_find_rsc_entry(fw->data);
 	if (!entry) {
 		sproc_err(sproc, "resource table not found in fw\n");
 		return NULL;
 	}

 	table = (void *)(fw->data + entry->start);

 	/* sanity check size and offset of resource table */
 	if (entry->start > SPROC_FW_SIZE ||
 	    entry->size > SPROC_FW_SIZE ||
 	    fw->size > SPROC_FW_SIZE ||
 	    entry->start + entry->size > fw->size ||
 	    sizeof(struct resource_table) > entry->size) {
 		sproc_err(sproc, "bad size of fw or resource table\n");
 		return NULL;
 	}

 	/* we don't support any version beyond the first */
 	if (table->ver != 1) {
 		sproc_err(sproc, "unsupported fw ver: %d\n", table->ver);
 		return NULL;
 	}

 	/* make sure reserved bytes are zeroes */
 	if (table->reserved[0] || table->reserved[1]) {
 		sproc_err(sproc, "non zero reserved bytes\n");
 		return NULL;
 	}

 	/* make sure the offsets array isn't truncated */
 	if (table->num > SPROC_MAX_TOC_ENTRIES ||
 	    table->num * sizeof(table->offset[0]) +
 	    sizeof(struct resource_table) > entry->size) {
 		sproc_err(sproc, "resource table incomplete\n");
 		return NULL;
 	}

 	/* If the fw size has grown, release the previous fw allocation */
 	if (SPROC_FW_SIZE < fw->size) {
 		sproc_err(sproc, "Insufficient space for fw (%d < %zd)\n",
 			  SPROC_FW_SIZE, fw->size);
 		return NULL;
 	}

 	sproc->fw_size = fw->size;
 	*tablesz = entry->size;

 	return table;
 }

 /* Find the resource table inside the remote processor's firmware. */
 static struct resource_table *
 sproc_find_loaded_rsc_table(struct rproc *rproc, const struct firmware *fw)
 {
 	struct sproc *sproc = rproc->priv;
 	const struct ste_toc_entry *entry;

 	if (!fw || !sproc->fw_addr)
 		return NULL;

 	entry = sproc_find_rsc_entry(sproc->fw_addr);
 	if (!entry) {
 		sproc_err(sproc, "resource table not found in fw\n");
 		return NULL;
 	}

 	return sproc->fw_addr + entry->start;
 }

 /* STE modem firmware handler operations */
 static const struct rproc_fw_ops sproc_fw_ops = {
 	.load = sproc_load_segments,
 	.find_rsc_table = sproc_find_rsc_table,
 	.find_loaded_rsc_table = sproc_find_loaded_rsc_table,
 };

 /* Kick the modem with specified notification id */
 static void sproc_kick(struct rproc *rproc, int vqid)
 {
 	struct sproc *sproc = rproc->priv;

 	sproc_dbg(sproc, "kick vqid:%d\n", vqid);

 	/*
 	 * We need different notification IDs for RX and TX so add
 	 * an offset on TX notification IDs.
 	 */
 	sproc->mdev->ops.kick(sproc->mdev, vqid + SPROC_MAX_NOTIFY_ID);
 }

 /* Received a kick from a modem, kick the virtqueue */
 static void sproc_kick_callback(struct ste_modem_device *mdev, int vqid)
 {
 	struct sproc *sproc = mdev->drv_data;

 	if (rproc_vq_interrupt(sproc->rproc, vqid) == IRQ_NONE)
 		sproc_dbg(sproc, "no message was found in vqid %d\n", vqid);
 }

 static struct ste_modem_dev_cb sproc_dev_cb = {
 	.kick = sproc_kick_callback,
 };

 /* Start the STE modem */
 static int sproc_start(struct rproc *rproc)
 {
 	struct sproc *sproc = rproc->priv;
 	int i, err;

 	sproc_dbg(sproc, "start ste-modem\n");

 	/* Sanity test the max_notifyid */
 	if (rproc->max_notifyid > SPROC_MAX_NOTIFY_ID) {
 		sproc_err(sproc, "Notification IDs too high:%d\n",
 			  rproc->max_notifyid);
 		return -EINVAL;
 	}

 	/* Subscribe to notifications */
 	for (i = 0; i <= rproc->max_notifyid; i++) {
 		err = sproc->mdev->ops.kick_subscribe(sproc->mdev, i);
 		if (err) {
 			sproc_err(sproc,
 				  "subscription of kicks failed:%d\n", err);
 			return err;
 		}
 	}

 	/* Request modem start-up*/
 	return sproc->mdev->ops.power(sproc->mdev, true);
 }

 /* Stop the STE modem */
 static int sproc_stop(struct rproc *rproc)
 {
 	struct sproc *sproc = rproc->priv;
 	sproc_dbg(sproc, "stop ste-modem\n");

 	return sproc->mdev->ops.power(sproc->mdev, false);
 }

 static struct rproc_ops sproc_ops = {
 	.start		= sproc_start,
 	.stop		= sproc_stop,
 	.kick		= sproc_kick,
 };

 /* STE modem device is unregistered */
 static int sproc_drv_remove(struct platform_device *pdev)
 {
 	struct ste_modem_device *mdev =
 		container_of(pdev, struct ste_modem_device, pdev);
 	struct sproc *sproc = mdev->drv_data;

 	sproc_dbg(sproc, "remove ste-modem\n");

 	/* Reset device callback functions */
 	sproc->mdev->ops.setup(sproc->mdev, NULL);

 	/* Unregister as remoteproc device */
 	rproc_del(sproc->rproc);
 	dma_free_coherent(sproc->rproc->dev.parent, SPROC_FW_SIZE,
 			  sproc->fw_addr, sproc->fw_dma_addr);
 	rproc_put(sproc->rproc);

 	mdev->drv_data = NULL;

 	return 0;
 }

 /* Handle probe of a modem device */
 static int sproc_probe(struct platform_device *pdev)
 {
 	struct ste_modem_device *mdev =
 		container_of(pdev, struct ste_modem_device, pdev);
 	struct sproc *sproc;
 	struct rproc *rproc;
 	int err;

 	dev_dbg(&mdev->pdev.dev, "probe ste-modem\n");

 	if (!mdev->ops.setup || !mdev->ops.kick || !mdev->ops.kick_subscribe ||
 	    !mdev->ops.power) {
 		dev_err(&mdev->pdev.dev, "invalid mdev ops\n");
 		return -EINVAL;
 	}

 	rproc = rproc_alloc(&mdev->pdev.dev, mdev->pdev.name, &sproc_ops,
 			    SPROC_MODEM_FIRMWARE, sizeof(*sproc));
 	if (!rproc)
 		return -ENOMEM;

 	sproc = rproc->priv;
 	sproc->mdev = mdev;
 	sproc->rproc = rproc;
 	rproc->has_iommu = false;
 	mdev->drv_data = sproc;

 	/* Provide callback functions to modem device */
 	sproc->mdev->ops.setup(sproc->mdev, &sproc_dev_cb);

 	/* Set the STE-modem specific firmware handler */
 	rproc->fw_ops = &sproc_fw_ops;

 	/*
 	 * STE-modem requires the firmware to be located
 	 * at the start of the shared memory region. So we need to
 	 * reserve space for firmware at the start.
 	 */
 	sproc->fw_addr = dma_alloc_coherent(rproc->dev.parent, SPROC_FW_SIZE,
 					    &sproc->fw_dma_addr,
 					    GFP_KERNEL);
 	if (!sproc->fw_addr) {
 		sproc_err(sproc, "Cannot allocate memory for fw\n");
 		err = -ENOMEM;
 		goto free_rproc;
 	}

 	/* Register as a remoteproc device */
 	err = rproc_add(rproc);
 	if (err)
 		goto free_mem;

 	return 0;

 free_mem:
 	dma_free_coherent(rproc->dev.parent, SPROC_FW_SIZE,
 			  sproc->fw_addr, sproc->fw_dma_addr);
 free_rproc:
 	/* Reset device data upon error */
 	mdev->drv_data = NULL;
 	rproc_put(rproc);
 	return err;
 }

 static struct platform_driver sproc_driver = {
 	.driver	= {
 		.name	= SPROC_MODEM_NAME,
 	},
 	.probe	= sproc_probe,
 	.remove	= sproc_drv_remove,
 };

 module_platform_driver(sproc_driver);
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("STE Modem driver using the Remote Processor Framework");
	/*
	* Copyright (C) ST-Ericsson AB 2012
	* Author: Sjur Brændeland <sjur.brandeland@stericsson.com>
	* License terms: GNU General Public License (GPL), version 2
	*/

	#include <linux/module.h>
	#include <linux/dma-mapping.h>
	#include <linux/remoteproc.h>
	#include <linux/ste_modem_shm.h>
	#include "remoteproc_internal.h"

	#define SPROC_FW_SIZE (50 * 4096)
	#define SPROC_MAX_TOC_ENTRIES 32
	#define SPROC_MAX_NOTIFY_ID 14
	#define SPROC_RESOURCE_NAME "rsc-table"
	#define SPROC_MODEM_NAME "ste-modem"
	#define SPROC_MODEM_FIRMWARE SPROC_MODEM_NAME "-fw.bin"

	#define sproc_dbg(sproc, fmt, ...) \
	dev_dbg(&sproc->mdev->pdev.dev, fmt, ##__VA_ARGS__)
	#define sproc_err(sproc, fmt, ...) \
	dev_err(&sproc->mdev->pdev.dev, fmt, ##__VA_ARGS__)

	/* STE-modem control structure */
	struct sproc {
	struct rproc *rproc;
	struct ste_modem_device *mdev;
	int error;
	void *fw_addr;
	size_t fw_size;
	dma_addr_t fw_dma_addr;
	};

	/* STE-Modem firmware entry */
	struct ste_toc_entry {
	__le32 start;
	__le32 size;
	__le32 flags;
	__le32 entry_point;
	__le32 load_addr;
	char name[12];
	};

	/*
	* The Table Of Content is located at the start of the firmware image and
	* at offset zero in the shared memory region. The resource table typically
	* contains the initial boot image (boot strap) and other information elements
	* such as remoteproc resource table. Each entry is identified by a unique
	* name.
	*/
	struct ste_toc {
	struct ste_toc_entry table[SPROC_MAX_TOC_ENTRIES];
	};

	/* Loads the firmware to shared memory. */
	static int sproc_load_segments(struct rproc rproc, const struct firmware fw)
	{
	struct sproc *sproc = rproc->priv;

	memcpy(sproc->fw_addr, fw->data, fw->size);

	return 0;
	}

	/* Find the entry for resource table in the Table of Content */
	static const struct ste_toc_entry sproc_find_rsc_entry(const void data)
	{
	int i;
	const struct ste_toc *toc;
	toc = data;

	/* Search the table for the resource table */
	for (i = 0; i < SPROC_MAX_TOC_ENTRIES &&
	toc->table[i].start != 0xffffffff; i++) {
	if (!strncmp(toc->table[i].name, SPROC_RESOURCE_NAME,
	sizeof(toc->table[i].name)))
	return &toc->table[i];
	}

	return NULL;
	}

	/* Find the resource table inside the remote processor's firmware. */
	static struct resource_table *
	sproc_find_rsc_table(struct rproc rproc, const struct firmware fw,
	int *tablesz)
	{
	struct sproc *sproc = rproc->priv;
	struct resource_table *table;
	const struct ste_toc_entry *entry;

	if (!fw)
	return NULL;

	entry = sproc_find_rsc_entry(fw->data);
	if (!entry) {
	sproc_err(sproc, "resource table not found in fw\n");
	return NULL;
	}

	table = (void *)(fw->data + entry->start);

	/* sanity check size and offset of resource table */
	if (entry->start > SPROC_FW_SIZE \|\|
	entry->size > SPROC_FW_SIZE \|\|
	fw->size > SPROC_FW_SIZE \|\|
	entry->start + entry->size > fw->size \|\|
	sizeof(struct resource_table) > entry->size) {
	sproc_err(sproc, "bad size of fw or resource table\n");
	return NULL;
	}

	/* we don't support any version beyond the first */
	if (table->ver != 1) {
	sproc_err(sproc, "unsupported fw ver: %d\n", table->ver);
	return NULL;
	}

	/* make sure reserved bytes are zeroes */
	if (table->reserved[0] \|\| table->reserved[1]) {
	sproc_err(sproc, "non zero reserved bytes\n");
	return NULL;
	}

	/* make sure the offsets array isn't truncated */
	if (table->num > SPROC_MAX_TOC_ENTRIES \|\|
	table->num * sizeof(table->offset[0]) +
	sizeof(struct resource_table) > entry->size) {
	sproc_err(sproc, "resource table incomplete\n");
	return NULL;
	}

	/* If the fw size has grown, release the previous fw allocation */
	if (SPROC_FW_SIZE < fw->size) {
	sproc_err(sproc, "Insufficient space for fw (%d < %zd)\n",
	SPROC_FW_SIZE, fw->size);
	return NULL;
	}

	sproc->fw_size = fw->size;
	*tablesz = entry->size;

	return table;
	}

	/* Find the resource table inside the remote processor's firmware. */
	static struct resource_table *
	sproc_find_loaded_rsc_table(struct rproc rproc, const struct firmware fw)
	{
	struct sproc *sproc = rproc->priv;
	const struct ste_toc_entry *entry;

	if (!fw \|\| !sproc->fw_addr)
	return NULL;

	entry = sproc_find_rsc_entry(sproc->fw_addr);
	if (!entry) {
	sproc_err(sproc, "resource table not found in fw\n");
	return NULL;
	}

	return sproc->fw_addr + entry->start;
	}

	/* STE modem firmware handler operations */
	static const struct rproc_fw_ops sproc_fw_ops = {
	.load = sproc_load_segments,
	.find_rsc_table = sproc_find_rsc_table,
	.find_loaded_rsc_table = sproc_find_loaded_rsc_table,
	};

	/* Kick the modem with specified notification id */
	static void sproc_kick(struct rproc *rproc, int vqid)
	{
	struct sproc *sproc = rproc->priv;

	sproc_dbg(sproc, "kick vqid:%d\n", vqid);

	/*
	* We need different notification IDs for RX and TX so add
	* an offset on TX notification IDs.
	*/
	sproc->mdev->ops.kick(sproc->mdev, vqid + SPROC_MAX_NOTIFY_ID);
	}

	/* Received a kick from a modem, kick the virtqueue */
	static void sproc_kick_callback(struct ste_modem_device *mdev, int vqid)
	{
	struct sproc *sproc = mdev->drv_data;

	if (rproc_vq_interrupt(sproc->rproc, vqid) == IRQ_NONE)
	sproc_dbg(sproc, "no message was found in vqid %d\n", vqid);
	}

	static struct ste_modem_dev_cb sproc_dev_cb = {
	.kick = sproc_kick_callback,
	};

	/* Start the STE modem */
	static int sproc_start(struct rproc *rproc)
	{
	struct sproc *sproc = rproc->priv;
	int i, err;

	sproc_dbg(sproc, "start ste-modem\n");

	/* Sanity test the max_notifyid */
	if (rproc->max_notifyid > SPROC_MAX_NOTIFY_ID) {
	sproc_err(sproc, "Notification IDs too high:%d\n",
	rproc->max_notifyid);
	return -EINVAL;
	}

	/* Subscribe to notifications */
	for (i = 0; i <= rproc->max_notifyid; i++) {
	err = sproc->mdev->ops.kick_subscribe(sproc->mdev, i);
	if (err) {
	sproc_err(sproc,
	"subscription of kicks failed:%d\n", err);
	return err;
	}
	}

	/* Request modem start-up*/
	return sproc->mdev->ops.power(sproc->mdev, true);
	}

	/* Stop the STE modem */
	static int sproc_stop(struct rproc *rproc)
	{
	struct sproc *sproc = rproc->priv;
	sproc_dbg(sproc, "stop ste-modem\n");

	return sproc->mdev->ops.power(sproc->mdev, false);
	}

	static struct rproc_ops sproc_ops = {
	.start = sproc_start,
	.stop = sproc_stop,
	.kick = sproc_kick,
	};

	/* STE modem device is unregistered */
	static int sproc_drv_remove(struct platform_device *pdev)
	{
	struct ste_modem_device *mdev =
	container_of(pdev, struct ste_modem_device, pdev);
	struct sproc *sproc = mdev->drv_data;

	sproc_dbg(sproc, "remove ste-modem\n");

	/* Reset device callback functions */
	sproc->mdev->ops.setup(sproc->mdev, NULL);

	/* Unregister as remoteproc device */
	rproc_del(sproc->rproc);
	dma_free_coherent(sproc->rproc->dev.parent, SPROC_FW_SIZE,
	sproc->fw_addr, sproc->fw_dma_addr);
	rproc_put(sproc->rproc);

	mdev->drv_data = NULL;

	return 0;
	}

	/* Handle probe of a modem device */
	static int sproc_probe(struct platform_device *pdev)
	{
	struct ste_modem_device *mdev =
	container_of(pdev, struct ste_modem_device, pdev);
	struct sproc *sproc;
	struct rproc *rproc;
	int err;

	dev_dbg(&mdev->pdev.dev, "probe ste-modem\n");

	if (!mdev->ops.setup \|\| !mdev->ops.kick \|\| !mdev->ops.kick_subscribe \|\|
	!mdev->ops.power) {
	dev_err(&mdev->pdev.dev, "invalid mdev ops\n");
	return -EINVAL;
	}

	rproc = rproc_alloc(&mdev->pdev.dev, mdev->pdev.name, &sproc_ops,
	SPROC_MODEM_FIRMWARE, sizeof(*sproc));
	if (!rproc)
	return -ENOMEM;

	sproc = rproc->priv;
	sproc->mdev = mdev;
	sproc->rproc = rproc;
	rproc->has_iommu = false;
	mdev->drv_data = sproc;

	/* Provide callback functions to modem device */
	sproc->mdev->ops.setup(sproc->mdev, &sproc_dev_cb);

	/* Set the STE-modem specific firmware handler */
	rproc->fw_ops = &sproc_fw_ops;

	/*
	* STE-modem requires the firmware to be located
	* at the start of the shared memory region. So we need to
	* reserve space for firmware at the start.
	*/
	sproc->fw_addr = dma_alloc_coherent(rproc->dev.parent, SPROC_FW_SIZE,
	&sproc->fw_dma_addr,
	GFP_KERNEL);
	if (!sproc->fw_addr) {
	sproc_err(sproc, "Cannot allocate memory for fw\n");
	err = -ENOMEM;
	goto free_rproc;
	}

	/* Register as a remoteproc device */
	err = rproc_add(rproc);
	if (err)
	goto free_mem;

	return 0;

	free_mem:
	dma_free_coherent(rproc->dev.parent, SPROC_FW_SIZE,
	sproc->fw_addr, sproc->fw_dma_addr);
	free_rproc:
	/* Reset device data upon error */
	mdev->drv_data = NULL;
	rproc_put(rproc);
	return err;
	}

	static struct platform_driver sproc_driver = {
	.driver = {
	.name = SPROC_MODEM_NAME,
	},
	.probe = sproc_probe,
	.remove = sproc_drv_remove,
	};

	module_platform_driver(sproc_driver);
	MODULE_LICENSE("GPL v2");
	MODULE_DESCRIPTION("STE Modem driver using the Remote Processor Framework");