diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
new file mode 100644
index 0000000..f749bc5
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/dev-uart.c
@@ -0,0 +1,174 @@
+/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on plat-s3c64xx/dev-uart.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s5pc1xx_uart0_resource[] = {
+	[0] = {
+		.start	= S3C_PA_UART0,
+		.end	= S3C_PA_UART0 + 0x100,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX0,
+		.end	= IRQ_S3CUART_RX0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX0,
+		.end	= IRQ_S3CUART_TX0,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR0,
+		.end	= IRQ_S3CUART_ERR0,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct resource s5pc1xx_uart1_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART1,
+		.end   = S3C_PA_UART1 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX1,
+		.end	= IRQ_S3CUART_RX1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX1,
+		.end	= IRQ_S3CUART_TX1,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR1,
+		.end	= IRQ_S3CUART_ERR1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s5pc1xx_uart2_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART2,
+		.end   = S3C_PA_UART2 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX2,
+		.end	= IRQ_S3CUART_RX2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX2,
+		.end	= IRQ_S3CUART_TX2,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR2,
+		.end	= IRQ_S3CUART_ERR2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s5pc1xx_uart3_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART3,
+		.end   = S3C_PA_UART3 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX3,
+		.end	= IRQ_S3CUART_RX3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX3,
+		.end	= IRQ_S3CUART_TX3,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR3,
+		.end	= IRQ_S3CUART_ERR3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s5pc1xx_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart0_resource),
+	},
+	[1] = {
+		.resources	= s5pc1xx_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart1_resource),
+	},
+	[2] = {
+		.resources	= s5pc1xx_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart2_resource),
+	},
+	[3] = {
+		.resources	= s5pc1xx_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart3_resource),
+	},
+};
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+	.id		= 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+	.id		= 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+	.id		= 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+	.id		= 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+	&s3c24xx_uart_device0,
+	&s3c24xx_uart_device1,
+	&s3c24xx_uart_device2,
+	&s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
+
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 037c1e0..cdd552d 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -459,7 +459,7 @@
 	int
 	depends on ARM && PLAT_S3C
 	default 2 if ARCH_S3C2400
-	default 4 if ARCH_S3C64XX || CPU_S3C2443
+	default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
 	default 3
 	help
 	  Select the number of available UART ports for the Samsung S3C
@@ -533,6 +533,13 @@
 	  Serial port support for the Samsung S3C6400 and S3C6410
 	  SoCs
 
+config SERIAL_S5PC100
+	tristate "Samsung S5PC100 Serial port support"
+	depends on SERIAL_SAMSUNG && CPU_S5PC100
+	default y
+	help
+	  Serial port support for the Samsung S5PC100 SoCs
+
 config SERIAL_MAX3100
 	tristate "MAX3100 support"
 	depends on SPI
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d5a2998..97f6fcc 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -43,6 +43,7 @@
 obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
 obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
 obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
+obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o