arch/arm/boot/dts/vf-colibri.dtsi - kernel/msm-4.9 - Gitiles

 /*
  * Copyright 2014 Toradex AG
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License
  *     version 2 as published by the Free Software Foundation.
  *
  *     This file is distributed in the hope that it will be useful
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  * Or, alternatively
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
  *     restriction, including without limitation the rights to use
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
  *     conditions:
  *
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
  *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */

 / {
 	bl: backlight {
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
 		pwms = <&pwm0 0 5000000 0>;
 		enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 	};

 	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "+V3.3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};

 	reg_module_3v3_avdd: regulator-module-3v3-avdd {
 		compatible = "regulator-fixed";
 		regulator-name = "+V3.3_AVDD_AUDIO";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 };

 &adc0 {
 	status = "okay";
 	vref-supply = <&reg_module_3v3_avdd>;
 };

 &adc1 {
 	status = "okay";
 	vref-supply = <&reg_module_3v3_avdd>;
 };

 &can0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan0>;
 	status = "disabled";
 };

 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
 	status = "disabled";
 };

 &clks {
 	assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
 			  <&clks VF610_CLK_ENET_TS_SEL>;
 	assigned-clock-parents = <&clks VF610_CLK_ENET_50M>,
 				 <&clks VF610_CLK_ENET_50M>;
 };

 &dspi1 {
 	bus-num = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_dspi1>;
 };

 &edma0 {
 	status = "okay";
 };

 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
 	bus-width = <4>;
 	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 	disable-wp;
 };

 &fec1 {
 	phy-mode = "rmii";
 	phy-supply = <&reg_module_3v3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
 };

 &i2c0 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c0>;
 };

 &nfc {
 	assigned-clocks = <&clks VF610_CLK_NFC>;
 	assigned-clock-rates = <33000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_nfc>;
 	status = "okay";

 	nand@0 {
 		compatible = "fsl,vf610-nfc-nandcs";
 		reg = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		nand-bus-width = <8>;
 		nand-ecc-mode = "hw";
 		nand-ecc-strength = <32>;
 		nand-ecc-step-size = <2048>;
 		nand-on-flash-bbt;
 	};
 };

 &pwm0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm0>;
 };

 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 };

 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart0>;
 };

 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 };

 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
 };

 &usbdev0 {
 	disable-over-current;
 	status = "okay";
 };

 &usbh1 {
 	disable-over-current;
 	status = "okay";
 };

 &usbmisc0 {
 	status = "okay";
 };

 &usbmisc1 {
 	status = "okay";
 };

 &usbphy0 {
 	status = "okay";
 };

 &usbphy1 {
 	status = "okay";
 };

 &iomuxc {
 	vf610-colibri {
 		pinctrl_flexcan0: can0grp {
 			fsl,pins = <
 				VF610_PAD_PTB14__CAN0_RX	0x31F1
 				VF610_PAD_PTB15__CAN0_TX	0x31F2
 			>;
 		};

 		pinctrl_flexcan1: can1grp {
 			fsl,pins = <
 				VF610_PAD_PTB16__CAN1_RX	0x31F1
 				VF610_PAD_PTB17__CAN1_TX	0x31F2
 			>;
 		};

 		pinctrl_gpio_ext: gpio_ext {
 			fsl,pins = <
 				VF610_PAD_PTD10__GPIO_89	0x22ed /* EXT_IO_0 */
 				VF610_PAD_PTD9__GPIO_88		0x22ed /* EXT_IO_1 */
 				VF610_PAD_PTD26__GPIO_68	0x22ed /* EXT_IO_2 */
 			>;
 		};

 		pinctrl_dspi1: dspi1grp {
 			fsl,pins = <
 				VF610_PAD_PTD5__DSPI1_CS0		0x33e2
 				VF610_PAD_PTD6__DSPI1_SIN		0x33e1
 				VF610_PAD_PTD7__DSPI1_SOUT		0x33e2
 				VF610_PAD_PTD8__DSPI1_SCK		0x33e2
 			>;
 		};

 		pinctrl_esdhc1: esdhc1grp {
 			fsl,pins = <
 				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
 				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
 				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
 				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
 				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
 				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
 				VF610_PAD_PTB20__GPIO_42	0x219d
 			>;
 		};

 		pinctrl_fec1: fec1grp {
 			fsl,pins = <
 				VF610_PAD_PTA6__RMII_CLKOUT		0x30d2
 				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
 				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
 				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
 				VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
 				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
 				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
 				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
 				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
 				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
 			>;
 		};

 		pinctrl_gpio_bl_on: gpio_bl_on {
 			fsl,pins = <
 				VF610_PAD_PTC0__GPIO_45		0x22ef
 			>;
 		};

 		pinctrl_i2c0: i2c0grp {
 			fsl,pins = <
 				VF610_PAD_PTB14__I2C0_SCL		0x37ff
 				VF610_PAD_PTB15__I2C0_SDA		0x37ff
 			>;
 		};

 		pinctrl_nfc: nfcgrp {
 			fsl,pins = <
 				VF610_PAD_PTD23__NF_IO7		0x28df
 				VF610_PAD_PTD22__NF_IO6		0x28df
 				VF610_PAD_PTD21__NF_IO5		0x28df
 				VF610_PAD_PTD20__NF_IO4		0x28df
 				VF610_PAD_PTD19__NF_IO3		0x28df
 				VF610_PAD_PTD18__NF_IO2		0x28df
 				VF610_PAD_PTD17__NF_IO1		0x28df
 				VF610_PAD_PTD16__NF_IO0		0x28df
 				VF610_PAD_PTB24__NF_WE_B	0x28c2
 				VF610_PAD_PTB25__NF_CE0_B	0x28c2
 				VF610_PAD_PTB27__NF_RE_B	0x28c2
 				VF610_PAD_PTC26__NF_RB_B	0x283d
 				VF610_PAD_PTC27__NF_ALE		0x28c2
 				VF610_PAD_PTC28__NF_CLE		0x28c2
 			>;
 		};

 		pinctrl_pwm0: pwm0grp {
 			fsl,pins = <
 				VF610_PAD_PTB0__FTM0_CH0		0x1182
 				VF610_PAD_PTB1__FTM0_CH1		0x1182
 			>;
 		};

 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				VF610_PAD_PTB8__FTM1_CH0		0x1182
 				VF610_PAD_PTB9__FTM1_CH1		0x1182
 			>;
 		};

 		pinctrl_uart0: uart0grp {
 			fsl,pins = <
 				VF610_PAD_PTB10__UART0_TX		0x21a2
 				VF610_PAD_PTB11__UART0_RX		0x21a1
 				VF610_PAD_PTB12__UART0_RTS		0x21a2
 				VF610_PAD_PTB13__UART0_CTS		0x21a1
 			>;
 		};

 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				VF610_PAD_PTB4__UART1_TX		0x21a2
 				VF610_PAD_PTB5__UART1_RX		0x21a1
 			>;
 		};

 		pinctrl_uart2: uart2grp {
 			fsl,pins = <
 				VF610_PAD_PTD0__UART2_TX		0x21a2
 				VF610_PAD_PTD1__UART2_RX		0x21a1
 				VF610_PAD_PTD2__UART2_RTS		0x21a2
 				VF610_PAD_PTD3__UART2_CTS		0x21a1
 			>;
 		};

 		pinctrl_usbh1_reg: gpio_usb_vbus {
 			fsl,pins = <
 				VF610_PAD_PTD4__GPIO_83			0x22ed
 			>;
 		};
 	};
 };
	/*
	* Copyright 2014 Toradex AG
	*
	* This file is dual-licensed: you can use it either under the terms
	* of the GPL or the X11 license, at your option. Note that this dual
	* licensing only applies to this file, and not this project as a
	* whole.
	*
	* a) This file is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* version 2 as published by the Free Software Foundation.
	*
	* This file is distributed in the hope that it will be useful
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* Or, alternatively
	*
	* b) Permission is hereby granted, free of charge, to any person
	* obtaining a copy of this software and associated documentation
	* files (the "Software"), to deal in the Software without
	* restriction, including without limitation the rights to use
	* copy, modify, merge, publish, distribute, sublicense, and/or
	* sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following
	* conditions:
	*
	* The above copyright notice and this permission notice shall be
	* included in all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/

	/ {
	bl: backlight {
	compatible = "pwm-backlight";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_gpio_bl_on>;
	pwms = <&pwm0 0 5000000 0>;
	enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
	status = "disabled";
	};

	reg_module_3v3: regulator-module-3v3 {
	compatible = "regulator-fixed";
	regulator-name = "+V3.3";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	};

	reg_module_3v3_avdd: regulator-module-3v3-avdd {
	compatible = "regulator-fixed";
	regulator-name = "+V3.3_AVDD_AUDIO";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	};
	};

	&adc0 {
	status = "okay";
	vref-supply = <&reg_module_3v3_avdd>;
	};

	&adc1 {
	status = "okay";
	vref-supply = <&reg_module_3v3_avdd>;
	};

	&can0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan0>;
	status = "disabled";
	};

	&can1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan1>;
	status = "disabled";
	};

	&clks {
	assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
	<&clks VF610_CLK_ENET_TS_SEL>;
	assigned-clock-parents = <&clks VF610_CLK_ENET_50M>,
	<&clks VF610_CLK_ENET_50M>;
	};

	&dspi1 {
	bus-num = <1>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_dspi1>;
	};

	&edma0 {
	status = "okay";
	};

	&esdhc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_esdhc1>;
	bus-width = <4>;
	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
	disable-wp;
	};

	&fec1 {
	phy-mode = "rmii";
	phy-supply = <&reg_module_3v3>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec1>;
	};

	&i2c0 {
	clock-frequency = <400000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c0>;
	};

	&nfc {
	assigned-clocks = <&clks VF610_CLK_NFC>;
	assigned-clock-rates = <33000000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_nfc>;
	status = "okay";

	nand@0 {
	compatible = "fsl,vf610-nfc-nandcs";
	reg = <0>;
	#address-cells = <1>;
	#size-cells = <1>;
	nand-bus-width = <8>;
	nand-ecc-mode = "hw";
	nand-ecc-strength = <32>;
	nand-ecc-step-size = <2048>;
	nand-on-flash-bbt;
	};
	};

	&pwm0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm0>;
	};

	&pwm1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm1>;
	};

	&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart0>;
	};

	&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	};

	&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	};

	&usbdev0 {
	disable-over-current;
	status = "okay";
	};

	&usbh1 {
	disable-over-current;
	status = "okay";
	};

	&usbmisc0 {
	status = "okay";
	};

	&usbmisc1 {
	status = "okay";
	};

	&usbphy0 {
	status = "okay";
	};

	&usbphy1 {
	status = "okay";
	};

	&iomuxc {
	vf610-colibri {
	pinctrl_flexcan0: can0grp {
	fsl,pins = <
	VF610_PAD_PTB14__CAN0_RX 0x31F1
	VF610_PAD_PTB15__CAN0_TX 0x31F2
	>;
	};

	pinctrl_flexcan1: can1grp {
	fsl,pins = <
	VF610_PAD_PTB16__CAN1_RX 0x31F1
	VF610_PAD_PTB17__CAN1_TX 0x31F2
	>;
	};

	pinctrl_gpio_ext: gpio_ext {
	fsl,pins = <
	VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */
	VF610_PAD_PTD9__GPIO_88 0x22ed /* EXT_IO_1 */
	VF610_PAD_PTD26__GPIO_68 0x22ed /* EXT_IO_2 */
	>;
	};

	pinctrl_dspi1: dspi1grp {
	fsl,pins = <
	VF610_PAD_PTD5__DSPI1_CS0 0x33e2
	VF610_PAD_PTD6__DSPI1_SIN 0x33e1
	VF610_PAD_PTD7__DSPI1_SOUT 0x33e2
	VF610_PAD_PTD8__DSPI1_SCK 0x33e2
	>;
	};

	pinctrl_esdhc1: esdhc1grp {
	fsl,pins = <
	VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
	VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
	VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
	VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
	VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
	VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
	VF610_PAD_PTB20__GPIO_42 0x219d
	>;
	};

	pinctrl_fec1: fec1grp {
	fsl,pins = <
	VF610_PAD_PTA6__RMII_CLKOUT 0x30d2
	VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
	VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
	VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
	VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
	VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
	VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
	VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
	VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
	VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
	>;
	};

	pinctrl_gpio_bl_on: gpio_bl_on {
	fsl,pins = <
	VF610_PAD_PTC0__GPIO_45 0x22ef
	>;
	};

	pinctrl_i2c0: i2c0grp {
	fsl,pins = <
	VF610_PAD_PTB14__I2C0_SCL 0x37ff
	VF610_PAD_PTB15__I2C0_SDA 0x37ff
	>;
	};

	pinctrl_nfc: nfcgrp {
	fsl,pins = <
	VF610_PAD_PTD23__NF_IO7 0x28df
	VF610_PAD_PTD22__NF_IO6 0x28df
	VF610_PAD_PTD21__NF_IO5 0x28df
	VF610_PAD_PTD20__NF_IO4 0x28df
	VF610_PAD_PTD19__NF_IO3 0x28df
	VF610_PAD_PTD18__NF_IO2 0x28df
	VF610_PAD_PTD17__NF_IO1 0x28df
	VF610_PAD_PTD16__NF_IO0 0x28df
	VF610_PAD_PTB24__NF_WE_B 0x28c2
	VF610_PAD_PTB25__NF_CE0_B 0x28c2
	VF610_PAD_PTB27__NF_RE_B 0x28c2
	VF610_PAD_PTC26__NF_RB_B 0x283d
	VF610_PAD_PTC27__NF_ALE 0x28c2
	VF610_PAD_PTC28__NF_CLE 0x28c2
	>;
	};

	pinctrl_pwm0: pwm0grp {
	fsl,pins = <
	VF610_PAD_PTB0__FTM0_CH0 0x1182
	VF610_PAD_PTB1__FTM0_CH1 0x1182
	>;
	};

	pinctrl_pwm1: pwm1grp {
	fsl,pins = <
	VF610_PAD_PTB8__FTM1_CH0 0x1182
	VF610_PAD_PTB9__FTM1_CH1 0x1182
	>;
	};

	pinctrl_uart0: uart0grp {
	fsl,pins = <
	VF610_PAD_PTB10__UART0_TX 0x21a2
	VF610_PAD_PTB11__UART0_RX 0x21a1
	VF610_PAD_PTB12__UART0_RTS 0x21a2
	VF610_PAD_PTB13__UART0_CTS 0x21a1
	>;
	};

	pinctrl_uart1: uart1grp {
	fsl,pins = <
	VF610_PAD_PTB4__UART1_TX 0x21a2
	VF610_PAD_PTB5__UART1_RX 0x21a1
	>;
	};

	pinctrl_uart2: uart2grp {
	fsl,pins = <
	VF610_PAD_PTD0__UART2_TX 0x21a2
	VF610_PAD_PTD1__UART2_RX 0x21a1
	VF610_PAD_PTD2__UART2_RTS 0x21a2
	VF610_PAD_PTD3__UART2_CTS 0x21a1
	>;
	};

	pinctrl_usbh1_reg: gpio_usb_vbus {
	fsl,pins = <
	VF610_PAD_PTD4__GPIO_83 0x22ed
	>;
	};
	};
	};