| /* |
| * Benq DC E300 subdriver |
| * |
| * Copyright (C) 2009 Jean-Francois Moine (http://moinejf.free.fr) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #define MODULE_NAME "benq" |
| |
| #include "gspca.h" |
| |
| MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>"); |
| MODULE_DESCRIPTION("Benq DC E300 USB Camera Driver"); |
| MODULE_LICENSE("GPL"); |
| |
| /* specific webcam descriptor */ |
| struct sd { |
| struct gspca_dev gspca_dev; /* !! must be the first item */ |
| }; |
| |
| /* V4L2 controls supported by the driver */ |
| static const struct ctrl sd_ctrls[] = { |
| }; |
| |
| static const struct v4l2_pix_format vga_mode[] = { |
| {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, |
| .bytesperline = 320, |
| .sizeimage = 320 * 240 * 3 / 8 + 590, |
| .colorspace = V4L2_COLORSPACE_JPEG}, |
| }; |
| |
| static void sd_isoc_irq(struct urb *urb); |
| |
| /* -- write a register -- */ |
| static void reg_w(struct gspca_dev *gspca_dev, |
| u16 value, u16 index) |
| { |
| struct usb_device *dev = gspca_dev->dev; |
| int ret; |
| |
| if (gspca_dev->usb_err < 0) |
| return; |
| ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
| 0x02, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, |
| index, |
| NULL, |
| 0, |
| 500); |
| if (ret < 0) { |
| err("reg_w err %d", ret); |
| gspca_dev->usb_err = ret; |
| } |
| } |
| |
| /* this function is called at probe time */ |
| static int sd_config(struct gspca_dev *gspca_dev, |
| const struct usb_device_id *id) |
| { |
| gspca_dev->cam.cam_mode = vga_mode; |
| gspca_dev->cam.nmodes = ARRAY_SIZE(vga_mode); |
| gspca_dev->cam.no_urb_create = 1; |
| gspca_dev->cam.reverse_alts = 1; |
| return 0; |
| } |
| |
| /* this function is called at probe and resume time */ |
| static int sd_init(struct gspca_dev *gspca_dev) |
| { |
| return 0; |
| } |
| |
| static int sd_isoc_init(struct gspca_dev *gspca_dev) |
| { |
| int ret; |
| |
| ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, |
| gspca_dev->nbalt - 1); |
| if (ret < 0) { |
| err("usb_set_interface failed"); |
| return ret; |
| } |
| /* reg_w(gspca_dev, 0x0003, 0x0002); */ |
| return 0; |
| } |
| |
| /* -- start the camera -- */ |
| static int sd_start(struct gspca_dev *gspca_dev) |
| { |
| struct urb *urb; |
| int i, n; |
| |
| /* create 4 URBs - 2 on endpoint 0x83 and 2 on 0x082 */ |
| #if MAX_NURBS < 4 |
| #error "Not enough URBs in the gspca table" |
| #endif |
| #define SD_PKT_SZ 64 |
| #define SD_NPKT 32 |
| for (n = 0; n < 4; n++) { |
| urb = usb_alloc_urb(SD_NPKT, GFP_KERNEL); |
| if (!urb) { |
| err("usb_alloc_urb failed"); |
| return -ENOMEM; |
| } |
| gspca_dev->urb[n] = urb; |
| urb->transfer_buffer = usb_alloc_coherent(gspca_dev->dev, |
| SD_PKT_SZ * SD_NPKT, |
| GFP_KERNEL, |
| &urb->transfer_dma); |
| |
| if (urb->transfer_buffer == NULL) { |
| err("usb_alloc_coherent failed"); |
| return -ENOMEM; |
| } |
| urb->dev = gspca_dev->dev; |
| urb->context = gspca_dev; |
| urb->transfer_buffer_length = SD_PKT_SZ * SD_NPKT; |
| urb->pipe = usb_rcvisocpipe(gspca_dev->dev, |
| n & 1 ? 0x82 : 0x83); |
| urb->transfer_flags = URB_ISO_ASAP |
| | URB_NO_TRANSFER_DMA_MAP; |
| urb->interval = 1; |
| urb->complete = sd_isoc_irq; |
| urb->number_of_packets = SD_NPKT; |
| for (i = 0; i < SD_NPKT; i++) { |
| urb->iso_frame_desc[i].length = SD_PKT_SZ; |
| urb->iso_frame_desc[i].offset = SD_PKT_SZ * i; |
| } |
| } |
| |
| return gspca_dev->usb_err; |
| } |
| |
| static void sd_stopN(struct gspca_dev *gspca_dev) |
| { |
| reg_w(gspca_dev, 0x003c, 0x0003); |
| reg_w(gspca_dev, 0x003c, 0x0004); |
| reg_w(gspca_dev, 0x003c, 0x0005); |
| reg_w(gspca_dev, 0x003c, 0x0006); |
| reg_w(gspca_dev, 0x003c, 0x0007); |
| usb_set_interface(gspca_dev->dev, gspca_dev->iface, |
| gspca_dev->nbalt - 1); |
| } |
| |
| static void sd_pkt_scan(struct gspca_dev *gspca_dev, |
| u8 *data, /* isoc packet */ |
| int len) /* iso packet length */ |
| { |
| /* unused */ |
| } |
| |
| /* reception of an URB */ |
| static void sd_isoc_irq(struct urb *urb) |
| { |
| struct gspca_dev *gspca_dev = (struct gspca_dev *) urb->context; |
| struct urb *urb0; |
| u8 *data; |
| int i, st; |
| |
| PDEBUG(D_PACK, "sd isoc irq"); |
| if (!gspca_dev->streaming) |
| return; |
| if (urb->status != 0) { |
| if (urb->status == -ESHUTDOWN) |
| return; /* disconnection */ |
| #ifdef CONFIG_PM |
| if (gspca_dev->frozen) |
| return; |
| #endif |
| err("urb status: %d", urb->status); |
| return; |
| } |
| |
| /* if this is a control URN (ep 0x83), wait */ |
| if (urb == gspca_dev->urb[0] || urb == gspca_dev->urb[2]) |
| return; |
| |
| /* scan both received URBs */ |
| if (urb == gspca_dev->urb[1]) |
| urb0 = gspca_dev->urb[0]; |
| else |
| urb0 = gspca_dev->urb[2]; |
| for (i = 0; i < urb->number_of_packets; i++) { |
| |
| /* check the packet status and length */ |
| if (urb0->iso_frame_desc[i].actual_length != SD_PKT_SZ |
| || urb->iso_frame_desc[i].actual_length != SD_PKT_SZ) { |
| PDEBUG(D_ERR, "ISOC bad lengths %d / %d", |
| urb0->iso_frame_desc[i].actual_length, |
| urb->iso_frame_desc[i].actual_length); |
| gspca_dev->last_packet_type = DISCARD_PACKET; |
| continue; |
| } |
| st = urb0->iso_frame_desc[i].status; |
| if (st == 0) |
| st = urb->iso_frame_desc[i].status; |
| if (st) { |
| err("ISOC data error: [%d] status=%d", |
| i, st); |
| gspca_dev->last_packet_type = DISCARD_PACKET; |
| continue; |
| } |
| |
| /* |
| * The images are received in URBs of different endpoints |
| * (0x83 and 0x82). |
| * Image pieces in URBs of ep 0x83 are continuated in URBs of |
| * ep 0x82 of the same index. |
| * The packets in the URBs of endpoint 0x83 start with: |
| * - 80 ba/bb 00 00 = start of image followed by 'ff d8' |
| * - 04 ba/bb oo oo = image piece |
| * where 'oo oo' is the image offset |
| (not cheked) |
| * - (other -> bad frame) |
| * The images are JPEG encoded with full header and |
| * normal ff escape. |
| * The end of image ('ff d9') may occur in any URB. |
| * (not cheked) |
| */ |
| data = (u8 *) urb0->transfer_buffer |
| + urb0->iso_frame_desc[i].offset; |
| if (data[0] == 0x80 && (data[1] & 0xfe) == 0xba) { |
| |
| /* new image */ |
| gspca_frame_add(gspca_dev, LAST_PACKET, |
| NULL, 0); |
| gspca_frame_add(gspca_dev, FIRST_PACKET, |
| data + 4, SD_PKT_SZ - 4); |
| } else if (data[0] == 0x04 && (data[1] & 0xfe) == 0xba) { |
| gspca_frame_add(gspca_dev, INTER_PACKET, |
| data + 4, SD_PKT_SZ - 4); |
| } else { |
| gspca_dev->last_packet_type = DISCARD_PACKET; |
| continue; |
| } |
| data = (u8 *) urb->transfer_buffer |
| + urb->iso_frame_desc[i].offset; |
| gspca_frame_add(gspca_dev, INTER_PACKET, |
| data, SD_PKT_SZ); |
| } |
| |
| /* resubmit the URBs */ |
| st = usb_submit_urb(urb0, GFP_ATOMIC); |
| if (st < 0) |
| err("usb_submit_urb(0) ret %d", st); |
| st = usb_submit_urb(urb, GFP_ATOMIC); |
| if (st < 0) |
| err("usb_submit_urb() ret %d", st); |
| } |
| |
| /* sub-driver description */ |
| static const struct sd_desc sd_desc = { |
| .name = MODULE_NAME, |
| .ctrls = sd_ctrls, |
| .nctrls = ARRAY_SIZE(sd_ctrls), |
| .config = sd_config, |
| .init = sd_init, |
| .isoc_init = sd_isoc_init, |
| .start = sd_start, |
| .stopN = sd_stopN, |
| .pkt_scan = sd_pkt_scan, |
| }; |
| |
| /* -- module initialisation -- */ |
| static const struct usb_device_id device_table[] = { |
| {USB_DEVICE(0x04a5, 0x3035)}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(usb, device_table); |
| |
| /* -- device connect -- */ |
| static int sd_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), |
| THIS_MODULE); |
| } |
| |
| static struct usb_driver sd_driver = { |
| .name = MODULE_NAME, |
| .id_table = device_table, |
| .probe = sd_probe, |
| .disconnect = gspca_disconnect, |
| #ifdef CONFIG_PM |
| .suspend = gspca_suspend, |
| .resume = gspca_resume, |
| #endif |
| }; |
| |
| /* -- module insert / remove -- */ |
| static int __init sd_mod_init(void) |
| { |
| return usb_register(&sd_driver); |
| } |
| static void __exit sd_mod_exit(void) |
| { |
| usb_deregister(&sd_driver); |
| } |
| |
| module_init(sd_mod_init); |
| module_exit(sd_mod_exit); |