ata_piix: implement IOCFG bit18 quirk

Some notebooks need bit18 of IOCFG to be cleared for the drive bay to
work even though the bit is NOOP according to the datasheet.  This
patch implement IOCFG bit18 quirk and apply it to Clevo M570U.

  http://bugzilla.kernel.org/show_bug.cgi?id=8051

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: D. Angelis <dangelis@beta-cae.gr>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 22752e4..0ff96a0 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1173,6 +1173,39 @@
 	hpriv->map = map;
 }
 
+static void piix_iocfg_bit18_quirk(struct pci_dev *pdev)
+{
+	static struct dmi_system_id sysids[] = {
+		{
+			/* Clevo M570U sets IOCFG bit 18 if the cdrom
+			 * isn't used to boot the system which
+			 * disables the channel.
+			 */
+			.ident = "M570U",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."),
+				DMI_MATCH(DMI_PRODUCT_NAME, "M570U"),
+			},
+		},
+	};
+	u32 iocfg;
+
+	if (!dmi_check_system(sysids))
+		return;
+
+	/* The datasheet says that bit 18 is NOOP but certain systems
+	 * seem to use it to disable a channel.  Clear the bit on the
+	 * affected systems.
+	 */
+	pci_read_config_dword(pdev, PIIX_IOCFG, &iocfg);
+	if (iocfg & (1 << 18)) {
+		dev_printk(KERN_INFO, &pdev->dev,
+			   "applying IOCFG bit18 quirk\n");
+		iocfg &= ~(1 << 18);
+		pci_write_config_dword(pdev, PIIX_IOCFG, iocfg);
+	}
+}
+
 /**
  *	piix_init_one - Register PIIX ATA PCI device with kernel services
  *	@pdev: PCI device to register
@@ -1234,6 +1267,9 @@
 			      piix_map_db_table[ent->driver_data]);
 	}
 
+	/* apply IOCFG bit18 quirk */
+	piix_iocfg_bit18_quirk(pdev);
+
 	/* On ICH5, some BIOSen disable the interrupt using the
 	 * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3.
 	 * On ICH6, this bit has the same effect, but only when