drivers/i2c/busses/i2c-parport.c - kernel/msm-4.9 - Gitiles

 /* ------------------------------------------------------------------------ *
  * i2c-parport.c I2C bus over parallel port                                 *
  * ------------------------------------------------------------------------ *
    Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org>

    Based on older i2c-philips-par.c driver
    Copyright (C) 1995-2000 Simon G. Vogl
    With some changes from:
    Frodo Looijaard <frodol@dds.nl>
    Kyösti Mälkki <kmalkki@cc.hut.fi>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  * ------------------------------------------------------------------------ */

 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/parport.h>
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 #include <linux/i2c-smbus.h>
 #include <linux/slab.h>
 #include "i2c-parport.h"

 /* ----- Device list ------------------------------------------------------ */

 struct i2c_par {
 	struct pardevice *pdev;
 	struct i2c_adapter adapter;
 	struct i2c_algo_bit_data algo_data;
 	struct i2c_smbus_alert_setup alert_data;
 	struct i2c_client *ara;
 	struct i2c_par *next;
 };

 static struct i2c_par *adapter_list;

 /* ----- Low-level parallel port access ----------------------------------- */

 static void port_write_data(struct parport *p, unsigned char d)
 {
 	parport_write_data(p, d);
 }

 static void port_write_control(struct parport *p, unsigned char d)
 {
 	parport_write_control(p, d);
 }

 static unsigned char port_read_data(struct parport *p)
 {
 	return parport_read_data(p);
 }

 static unsigned char port_read_status(struct parport *p)
 {
 	return parport_read_status(p);
 }

 static unsigned char port_read_control(struct parport *p)
 {
 	return parport_read_control(p);
 }

 static void (*port_write[])(struct parport *, unsigned char) = {
 	port_write_data,
 	NULL,
 	port_write_control,
 };

 static unsigned char (*port_read[])(struct parport *) = {
 	port_read_data,
 	port_read_status,
 	port_read_control,
 };

 /* ----- Unified line operation functions --------------------------------- */

 static inline void line_set(struct parport *data, int state,
 	const struct lineop *op)
 {
 	u8 oldval = port_read[op->port](data);

 	/* Touch only the bit(s) needed */
 	if ((op->inverted && !state) || (!op->inverted && state))
 		port_write[op->port](data, oldval | op->val);
 	else
 		port_write[op->port](data, oldval & ~op->val);
 }

 static inline int line_get(struct parport *data,
 	const struct lineop *op)
 {
 	u8 oldval = port_read[op->port](data);

 	return ((op->inverted && (oldval & op->val) != op->val)
 	    || (!op->inverted && (oldval & op->val) == op->val));
 }

 /* ----- I2C algorithm call-back functions and structures ----------------- */

 static void parport_setscl(void *data, int state)
 {
 	line_set((struct parport *) data, state, &adapter_parm[type].setscl);
 }

 static void parport_setsda(void *data, int state)
 {
 	line_set((struct parport *) data, state, &adapter_parm[type].setsda);
 }

 static int parport_getscl(void *data)
 {
 	return line_get((struct parport *) data, &adapter_parm[type].getscl);
 }

 static int parport_getsda(void *data)
 {
 	return line_get((struct parport *) data, &adapter_parm[type].getsda);
 }

 /* Encapsulate the functions above in the correct structure.
    Note that this is only a template, from which the real structures are
    copied. The attaching code will set getscl to NULL for adapters that
    cannot read SCL back, and will also make the data field point to
    the parallel port structure. */
 static const struct i2c_algo_bit_data parport_algo_data = {
 	.setsda		= parport_setsda,
 	.setscl		= parport_setscl,
 	.getsda		= parport_getsda,
 	.getscl		= parport_getscl,
 	.udelay		= 10, /* ~50 kbps */
 	.timeout	= HZ,
 };

 /* ----- I2c and parallel port call-back functions and structures --------- */

 void i2c_parport_irq(void *data)
 {
 	struct i2c_par *adapter = data;
 	struct i2c_client *ara = adapter->ara;

 	if (ara) {
 		dev_dbg(&ara->dev, "SMBus alert received\n");
 		i2c_handle_smbus_alert(ara);
 	} else
 		dev_dbg(&adapter->adapter.dev,
 			"SMBus alert received but no ARA client!\n");
 }

 static void i2c_parport_attach (struct parport *port)
 {
 	struct i2c_par *adapter;

 	adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL);
 	if (adapter == NULL) {
 		printk(KERN_ERR "i2c-parport: Failed to kzalloc\n");
 		return;
 	}

 	pr_debug("i2c-parport: attaching to %s\n", port->name);
 	parport_disable_irq(port);
 	adapter->pdev = parport_register_device(port, "i2c-parport",
 		NULL, NULL, i2c_parport_irq, PARPORT_FLAG_EXCL, adapter);
 	if (!adapter->pdev) {
 		printk(KERN_ERR "i2c-parport: Unable to register with parport\n");
 		goto ERROR0;
 	}

 	/* Fill the rest of the structure */
 	adapter->adapter.owner = THIS_MODULE;
 	adapter->adapter.class = I2C_CLASS_HWMON;
 	strlcpy(adapter->adapter.name, "Parallel port adapter",
 		sizeof(adapter->adapter.name));
 	adapter->algo_data = parport_algo_data;
 	/* Slow down if we can't sense SCL */
 	if (!adapter_parm[type].getscl.val) {
 		adapter->algo_data.getscl = NULL;
 		adapter->algo_data.udelay = 50; /* ~10 kbps */
 	}
 	adapter->algo_data.data = port;
 	adapter->adapter.algo_data = &adapter->algo_data;
 	adapter->adapter.dev.parent = port->physport->dev;

 	if (parport_claim_or_block(adapter->pdev) < 0) {
 		printk(KERN_ERR "i2c-parport: Could not claim parallel port\n");
 		goto ERROR1;
 	}

 	/* Reset hardware to a sane state (SCL and SDA high) */
 	parport_setsda(port, 1);
 	parport_setscl(port, 1);
 	/* Other init if needed (power on...) */
 	if (adapter_parm[type].init.val) {
 		line_set(port, 1, &adapter_parm[type].init);
 		/* Give powered devices some time to settle */
 		msleep(100);
 	}

 	if (i2c_bit_add_bus(&adapter->adapter) < 0) {
 		printk(KERN_ERR "i2c-parport: Unable to register with I2C\n");
 		goto ERROR1;
 	}

 	/* Setup SMBus alert if supported */
 	if (adapter_parm[type].smbus_alert) {
 		adapter->alert_data.alert_edge_triggered = 1;
 		adapter->ara = i2c_setup_smbus_alert(&adapter->adapter,
 						     &adapter->alert_data);
 		if (adapter->ara)
 			parport_enable_irq(port);
 		else
 			printk(KERN_WARNING "i2c-parport: Failed to register "
 			       "ARA client\n");
 	}

 	/* Add the new adapter to the list */
 	adapter->next = adapter_list;
 	adapter_list = adapter;
         return;

 ERROR1:
 	parport_release(adapter->pdev);
 	parport_unregister_device(adapter->pdev);
 ERROR0:
 	kfree(adapter);
 }

 static void i2c_parport_detach (struct parport *port)
 {
 	struct i2c_par *adapter, *prev;

 	/* Walk the list */
 	for (prev = NULL, adapter = adapter_list; adapter;
 	     prev = adapter, adapter = adapter->next) {
 		if (adapter->pdev->port == port) {
 			if (adapter->ara) {
 				parport_disable_irq(port);
 				i2c_unregister_device(adapter->ara);
 			}
 			i2c_del_adapter(&adapter->adapter);

 			/* Un-init if needed (power off...) */
 			if (adapter_parm[type].init.val)
 				line_set(port, 0, &adapter_parm[type].init);

 			parport_release(adapter->pdev);
 			parport_unregister_device(adapter->pdev);
 			if (prev)
 				prev->next = adapter->next;
 			else
 				adapter_list = adapter->next;
 			kfree(adapter);
 			return;
 		}
 	}
 }

 static struct parport_driver i2c_parport_driver = {
 	.name	= "i2c-parport",
 	.attach	= i2c_parport_attach,
 	.detach	= i2c_parport_detach,
 };

 /* ----- Module loading, unloading and information ------------------------ */

 static int __init i2c_parport_init(void)
 {
 	if (type < 0) {
 		printk(KERN_WARNING "i2c-parport: adapter type unspecified\n");
 		return -ENODEV;
 	}

 	if (type >= ARRAY_SIZE(adapter_parm)) {
 		printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type);
 		return -ENODEV;
 	}

 	return parport_register_driver(&i2c_parport_driver);
 }

 static void __exit i2c_parport_exit(void)
 {
 	parport_unregister_driver(&i2c_parport_driver);
 }

 MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
 MODULE_DESCRIPTION("I2C bus over parallel port");
 MODULE_LICENSE("GPL");

 module_init(i2c_parport_init);
 module_exit(i2c_parport_exit);
	/* ------------------------------------------------------------------------ *
	* i2c-parport.c I2C bus over parallel port *
	* ------------------------------------------------------------------------ *
	Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org>

	Based on older i2c-philips-par.c driver
	Copyright (C) 1995-2000 Simon G. Vogl
	With some changes from:
	Frodo Looijaard <frodol@dds.nl>
	Kyösti Mälkki <kmalkki@cc.hut.fi>

	This program is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2 of the License, or
	(at your option) any later version.

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with this program; if not, write to the Free Software
	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	* ------------------------------------------------------------------------ */

	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/init.h>
	#include <linux/delay.h>
	#include <linux/parport.h>
	#include <linux/i2c.h>
	#include <linux/i2c-algo-bit.h>
	#include <linux/i2c-smbus.h>
	#include <linux/slab.h>
	#include "i2c-parport.h"

	/* ----- Device list ------------------------------------------------------ */

	struct i2c_par {
	struct pardevice *pdev;
	struct i2c_adapter adapter;
	struct i2c_algo_bit_data algo_data;
	struct i2c_smbus_alert_setup alert_data;
	struct i2c_client *ara;
	struct i2c_par *next;
	};

	static struct i2c_par *adapter_list;

	/* ----- Low-level parallel port access ----------------------------------- */

	static void port_write_data(struct parport *p, unsigned char d)
	{
	parport_write_data(p, d);
	}

	static void port_write_control(struct parport *p, unsigned char d)
	{
	parport_write_control(p, d);
	}

	static unsigned char port_read_data(struct parport *p)
	{
	return parport_read_data(p);
	}

	static unsigned char port_read_status(struct parport *p)
	{
	return parport_read_status(p);
	}

	static unsigned char port_read_control(struct parport *p)
	{
	return parport_read_control(p);
	}

	static void (port_write[])(struct parport , unsigned char) = {
	port_write_data,
	NULL,
	port_write_control,
	};

	static unsigned char (port_read[])(struct parport ) = {
	port_read_data,
	port_read_status,
	port_read_control,
	};

	/* ----- Unified line operation functions --------------------------------- */

	static inline void line_set(struct parport *data, int state,
	const struct lineop *op)
	{
	u8 oldval = port_read[op->port](data);

	/* Touch only the bit(s) needed */
	if ((op->inverted && !state) \|\| (!op->inverted && state))
	port_write[op->port](data, oldval \| op->val);
	else
	port_write[op->port](data, oldval & ~op->val);
	}

	static inline int line_get(struct parport *data,
	const struct lineop *op)
	{
	u8 oldval = port_read[op->port](data);

	return ((op->inverted && (oldval & op->val) != op->val)
	\|\| (!op->inverted && (oldval & op->val) == op->val));
	}

	/* ----- I2C algorithm call-back functions and structures ----------------- */

	static void parport_setscl(void *data, int state)
	{
	line_set((struct parport *) data, state, &adapter_parm[type].setscl);
	}

	static void parport_setsda(void *data, int state)
	{
	line_set((struct parport *) data, state, &adapter_parm[type].setsda);
	}

	static int parport_getscl(void *data)
	{
	return line_get((struct parport *) data, &adapter_parm[type].getscl);
	}

	static int parport_getsda(void *data)
	{
	return line_get((struct parport *) data, &adapter_parm[type].getsda);
	}

	/* Encapsulate the functions above in the correct structure.
	Note that this is only a template, from which the real structures are
	copied. The attaching code will set getscl to NULL for adapters that
	cannot read SCL back, and will also make the data field point to
	the parallel port structure. */
	static const struct i2c_algo_bit_data parport_algo_data = {
	.setsda = parport_setsda,
	.setscl = parport_setscl,
	.getsda = parport_getsda,
	.getscl = parport_getscl,
	.udelay = 10, /* ~50 kbps */
	.timeout = HZ,
	};

	/* ----- I2c and parallel port call-back functions and structures --------- */

	void i2c_parport_irq(void *data)
	{
	struct i2c_par *adapter = data;
	struct i2c_client *ara = adapter->ara;

	if (ara) {
	dev_dbg(&ara->dev, "SMBus alert received\n");
	i2c_handle_smbus_alert(ara);
	} else
	dev_dbg(&adapter->adapter.dev,
	"SMBus alert received but no ARA client!\n");
	}

	static void i2c_parport_attach (struct parport *port)
	{
	struct i2c_par *adapter;

	adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL);
	if (adapter == NULL) {
	printk(KERN_ERR "i2c-parport: Failed to kzalloc\n");
	return;
	}

	pr_debug("i2c-parport: attaching to %s\n", port->name);
	parport_disable_irq(port);
	adapter->pdev = parport_register_device(port, "i2c-parport",
	NULL, NULL, i2c_parport_irq, PARPORT_FLAG_EXCL, adapter);
	if (!adapter->pdev) {
	printk(KERN_ERR "i2c-parport: Unable to register with parport\n");
	goto ERROR0;
	}

	/* Fill the rest of the structure */
	adapter->adapter.owner = THIS_MODULE;
	adapter->adapter.class = I2C_CLASS_HWMON;
	strlcpy(adapter->adapter.name, "Parallel port adapter",
	sizeof(adapter->adapter.name));
	adapter->algo_data = parport_algo_data;
	/* Slow down if we can't sense SCL */
	if (!adapter_parm[type].getscl.val) {
	adapter->algo_data.getscl = NULL;
	adapter->algo_data.udelay = 50; /* ~10 kbps */
	}
	adapter->algo_data.data = port;
	adapter->adapter.algo_data = &adapter->algo_data;
	adapter->adapter.dev.parent = port->physport->dev;

	if (parport_claim_or_block(adapter->pdev) < 0) {
	printk(KERN_ERR "i2c-parport: Could not claim parallel port\n");
	goto ERROR1;
	}

	/* Reset hardware to a sane state (SCL and SDA high) */
	parport_setsda(port, 1);
	parport_setscl(port, 1);
	/* Other init if needed (power on...) */
	if (adapter_parm[type].init.val) {
	line_set(port, 1, &adapter_parm[type].init);
	/* Give powered devices some time to settle */
	msleep(100);
	}

	if (i2c_bit_add_bus(&adapter->adapter) < 0) {
	printk(KERN_ERR "i2c-parport: Unable to register with I2C\n");
	goto ERROR1;
	}

	/* Setup SMBus alert if supported */
	if (adapter_parm[type].smbus_alert) {
	adapter->alert_data.alert_edge_triggered = 1;
	adapter->ara = i2c_setup_smbus_alert(&adapter->adapter,
	&adapter->alert_data);
	if (adapter->ara)
	parport_enable_irq(port);
	else
	printk(KERN_WARNING "i2c-parport: Failed to register "
	"ARA client\n");
	}

	/* Add the new adapter to the list */
	adapter->next = adapter_list;
	adapter_list = adapter;
	return;

	ERROR1:
	parport_release(adapter->pdev);
	parport_unregister_device(adapter->pdev);
	ERROR0:
	kfree(adapter);
	}

	static void i2c_parport_detach (struct parport *port)
	{
	struct i2c_par adapter, prev;

	/* Walk the list */
	for (prev = NULL, adapter = adapter_list; adapter;
	prev = adapter, adapter = adapter->next) {
	if (adapter->pdev->port == port) {
	if (adapter->ara) {
	parport_disable_irq(port);
	i2c_unregister_device(adapter->ara);
	}
	i2c_del_adapter(&adapter->adapter);

	/* Un-init if needed (power off...) */
	if (adapter_parm[type].init.val)
	line_set(port, 0, &adapter_parm[type].init);

	parport_release(adapter->pdev);
	parport_unregister_device(adapter->pdev);
	if (prev)
	prev->next = adapter->next;
	else
	adapter_list = adapter->next;
	kfree(adapter);
	return;
	}
	}
	}

	static struct parport_driver i2c_parport_driver = {
	.name = "i2c-parport",
	.attach = i2c_parport_attach,
	.detach = i2c_parport_detach,
	};

	/* ----- Module loading, unloading and information ------------------------ */

	static int __init i2c_parport_init(void)
	{
	if (type < 0) {
	printk(KERN_WARNING "i2c-parport: adapter type unspecified\n");
	return -ENODEV;
	}

	if (type >= ARRAY_SIZE(adapter_parm)) {
	printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type);
	return -ENODEV;
	}

	return parport_register_driver(&i2c_parport_driver);
	}

	static void __exit i2c_parport_exit(void)
	{
	parport_unregister_driver(&i2c_parport_driver);
	}

	MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
	MODULE_DESCRIPTION("I2C bus over parallel port");
	MODULE_LICENSE("GPL");

	module_init(i2c_parport_init);
	module_exit(i2c_parport_exit);