| /* |
| Date Created: 1/12/2007 |
| File Name: metro-usb.h |
| Description: metro-usb.h is the drivers header file. The driver is a USB to Serial converter. |
| The driver takes USB data and sends it to a virtual ttyUSB# serial port. |
| The driver interfaces with the usbserial.ko driver supplied by Linux. |
| |
| NOTES: |
| To install the driver: |
| 1. Install the usbserial.ko module supplied by Linux with: # insmod usbserial.ko |
| 2. Install the metro-usb.ko module with: # insmod metro-usb.ko vender=0x#### product=0x#### debug=1 |
| The vendor, product and debug parameters are optional. |
| |
| Copyright: 2007 Metrologic Instruments. All rights reserved. |
| Copyright: 2011 Azimut Ltd. <http://azimutrzn.ru/> |
| Requirements: Notepad.exe |
| |
| Revision History: |
| |
| Date: Developer: Revisions: |
| ------------------------------------------------------------------------------ |
| 1/12/2007 Philip Nicastro Initial release. (v1.0.0.0) |
| 10/07/2011 Aleksey Babahin Update for new kernel (tested on 2.6.38) |
| Add unidirection mode support |
| |
| |
| */ |
| |
| #ifndef __LINUX_USB_SERIAL_METRO |
| #define __LINUX_USB_SERIAL_METRO |
| |
| /* Product information. */ |
| #define FOCUS_VENDOR_ID 0x0C2E |
| #define FOCUS_PRODUCT_ID 0x0720 |
| #define FOCUS_PRODUCT_ID_UNI 0x0710 |
| |
| #define METROUSB_SET_REQUEST_TYPE 0x40 |
| #define METROUSB_SET_MODEM_CTRL_REQUEST 10 |
| #define METROUSB_SET_BREAK_REQUEST 0x40 |
| #define METROUSB_MCR_NONE 0x8 /* Deactivate DTR and RTS. */ |
| #define METROUSB_MCR_RTS 0xa /* Activate RTS. */ |
| #define METROUSB_MCR_DTR 0x9 /* Activate DTR. */ |
| #define WDR_TIMEOUT 5000 /* default urb timeout. */ |
| |
| /* Private data structure. */ |
| struct metrousb_private { |
| spinlock_t lock; |
| int throttled; |
| unsigned long control_state; |
| }; |
| |
| #endif |