| /* |
| * BRIEF MODULE DESCRIPTION |
| * Au1000 interrupt routines. |
| * |
| * Copyright 2001 MontaVista Software Inc. |
| * Author: MontaVista Software, Inc. |
| * ppopov@mvista.com or source@mvista.com |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/module.h> |
| #include <linux/signal.h> |
| #include <linux/sched.h> |
| #include <linux/types.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/timex.h> |
| #include <linux/slab.h> |
| #include <linux/random.h> |
| #include <linux/delay.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/bootinfo.h> |
| #include <asm/io.h> |
| #include <asm/mipsregs.h> |
| #include <asm/system.h> |
| #include <asm/mach-au1x00/au1000.h> |
| #ifdef CONFIG_MIPS_PB1000 |
| #include <asm/mach-pb1x00/pb1000.h> |
| #endif |
| |
| #undef DEBUG_IRQ |
| #ifdef DEBUG_IRQ |
| /* note: prints function name for you */ |
| #define DPRINTK(fmt, args...) printk("%s: " fmt, __FUNCTION__ , ## args) |
| #else |
| #define DPRINTK(fmt, args...) |
| #endif |
| |
| #define EXT_INTC0_REQ0 2 /* IP 2 */ |
| #define EXT_INTC0_REQ1 3 /* IP 3 */ |
| #define EXT_INTC1_REQ0 4 /* IP 4 */ |
| #define EXT_INTC1_REQ1 5 /* IP 5 */ |
| #define MIPS_TIMER_IP 7 /* IP 7 */ |
| |
| extern void set_debug_traps(void); |
| extern irq_cpustat_t irq_stat [NR_CPUS]; |
| extern void mips_timer_interrupt(void); |
| |
| static void setup_local_irq(unsigned int irq, int type, int int_req); |
| static void end_irq(unsigned int irq_nr); |
| static inline void mask_and_ack_level_irq(unsigned int irq_nr); |
| static inline void mask_and_ack_rise_edge_irq(unsigned int irq_nr); |
| static inline void mask_and_ack_fall_edge_irq(unsigned int irq_nr); |
| static inline void mask_and_ack_either_edge_irq(unsigned int irq_nr); |
| inline void local_enable_irq(unsigned int irq_nr); |
| inline void local_disable_irq(unsigned int irq_nr); |
| |
| void (*board_init_irq)(void); |
| |
| static DEFINE_SPINLOCK(irq_lock); |
| |
| |
| inline void local_enable_irq(unsigned int irq_nr) |
| { |
| if (irq_nr > AU1000_LAST_INTC0_INT) { |
| au_writel(1<<(irq_nr-32), IC1_MASKSET); |
| au_writel(1<<(irq_nr-32), IC1_WAKESET); |
| } |
| else { |
| au_writel(1<<irq_nr, IC0_MASKSET); |
| au_writel(1<<irq_nr, IC0_WAKESET); |
| } |
| au_sync(); |
| } |
| |
| |
| inline void local_disable_irq(unsigned int irq_nr) |
| { |
| if (irq_nr > AU1000_LAST_INTC0_INT) { |
| au_writel(1<<(irq_nr-32), IC1_MASKCLR); |
| au_writel(1<<(irq_nr-32), IC1_WAKECLR); |
| } |
| else { |
| au_writel(1<<irq_nr, IC0_MASKCLR); |
| au_writel(1<<irq_nr, IC0_WAKECLR); |
| } |
| au_sync(); |
| } |
| |
| |
| static inline void mask_and_ack_rise_edge_irq(unsigned int irq_nr) |
| { |
| if (irq_nr > AU1000_LAST_INTC0_INT) { |
| au_writel(1<<(irq_nr-32), IC1_RISINGCLR); |
| au_writel(1<<(irq_nr-32), IC1_MASKCLR); |
| } |
| else { |
| au_writel(1<<irq_nr, IC0_RISINGCLR); |
| au_writel(1<<irq_nr, IC0_MASKCLR); |
| } |
| au_sync(); |
| } |
| |
| |
| static inline void mask_and_ack_fall_edge_irq(unsigned int irq_nr) |
| { |
| if (irq_nr > AU1000_LAST_INTC0_INT) { |
| au_writel(1<<(irq_nr-32), IC1_FALLINGCLR); |
| au_writel(1<<(irq_nr-32), IC1_MASKCLR); |
| } |
| else { |
| au_writel(1<<irq_nr, IC0_FALLINGCLR); |
| au_writel(1<<irq_nr, IC0_MASKCLR); |
| } |
| au_sync(); |
| } |
| |
| |
| static inline void mask_and_ack_either_edge_irq(unsigned int irq_nr) |
| { |
| /* This may assume that we don't get interrupts from |
| * both edges at once, or if we do, that we don't care. |
| */ |
| if (irq_nr > AU1000_LAST_INTC0_INT) { |
| au_writel(1<<(irq_nr-32), IC1_FALLINGCLR); |
| au_writel(1<<(irq_nr-32), IC1_RISINGCLR); |
| au_writel(1<<(irq_nr-32), IC1_MASKCLR); |
| } |
| else { |
| au_writel(1<<irq_nr, IC0_FALLINGCLR); |
| au_writel(1<<irq_nr, IC0_RISINGCLR); |
| au_writel(1<<irq_nr, IC0_MASKCLR); |
| } |
| au_sync(); |
| } |
| |
| |
| static inline void mask_and_ack_level_irq(unsigned int irq_nr) |
| { |
| |
| local_disable_irq(irq_nr); |
| au_sync(); |
| #if defined(CONFIG_MIPS_PB1000) |
| if (irq_nr == AU1000_GPIO_15) { |
| au_writel(0x8000, PB1000_MDR); /* ack int */ |
| au_sync(); |
| } |
| #endif |
| return; |
| } |
| |
| |
| static void end_irq(unsigned int irq_nr) |
| { |
| if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) { |
| local_enable_irq(irq_nr); |
| } |
| #if defined(CONFIG_MIPS_PB1000) |
| if (irq_nr == AU1000_GPIO_15) { |
| au_writel(0x4000, PB1000_MDR); /* enable int */ |
| au_sync(); |
| } |
| #endif |
| } |
| |
| unsigned long save_local_and_disable(int controller) |
| { |
| int i; |
| unsigned long flags, mask; |
| |
| spin_lock_irqsave(&irq_lock, flags); |
| if (controller) { |
| mask = au_readl(IC1_MASKSET); |
| for (i=32; i<64; i++) { |
| local_disable_irq(i); |
| } |
| } |
| else { |
| mask = au_readl(IC0_MASKSET); |
| for (i=0; i<32; i++) { |
| local_disable_irq(i); |
| } |
| } |
| spin_unlock_irqrestore(&irq_lock, flags); |
| |
| return mask; |
| } |
| |
| void restore_local_and_enable(int controller, unsigned long mask) |
| { |
| int i; |
| unsigned long flags, new_mask; |
| |
| spin_lock_irqsave(&irq_lock, flags); |
| for (i=0; i<32; i++) { |
| if (mask & (1<<i)) { |
| if (controller) |
| local_enable_irq(i+32); |
| else |
| local_enable_irq(i); |
| } |
| } |
| if (controller) |
| new_mask = au_readl(IC1_MASKSET); |
| else |
| new_mask = au_readl(IC0_MASKSET); |
| |
| spin_unlock_irqrestore(&irq_lock, flags); |
| } |
| |
| |
| static struct irq_chip rise_edge_irq_type = { |
| .typename = "Au1000 Rise Edge", |
| .ack = mask_and_ack_rise_edge_irq, |
| .mask = local_disable_irq, |
| .mask_ack = mask_and_ack_rise_edge_irq, |
| .unmask = local_enable_irq, |
| .end = end_irq, |
| }; |
| |
| static struct irq_chip fall_edge_irq_type = { |
| .typename = "Au1000 Fall Edge", |
| .ack = mask_and_ack_fall_edge_irq, |
| .mask = local_disable_irq, |
| .mask_ack = mask_and_ack_fall_edge_irq, |
| .unmask = local_enable_irq, |
| .end = end_irq, |
| }; |
| |
| static struct irq_chip either_edge_irq_type = { |
| .typename = "Au1000 Rise or Fall Edge", |
| .ack = mask_and_ack_either_edge_irq, |
| .mask = local_disable_irq, |
| .mask_ack = mask_and_ack_either_edge_irq, |
| .unmask = local_enable_irq, |
| .end = end_irq, |
| }; |
| |
| static struct irq_chip level_irq_type = { |
| .typename = "Au1000 Level", |
| .ack = mask_and_ack_level_irq, |
| .mask = local_disable_irq, |
| .mask_ack = mask_and_ack_level_irq, |
| .unmask = local_enable_irq, |
| .end = end_irq, |
| }; |
| |
| #ifdef CONFIG_PM |
| void startup_match20_interrupt(irq_handler_t handler) |
| { |
| struct irq_desc *desc = &irq_desc[AU1000_TOY_MATCH2_INT]; |
| |
| static struct irqaction action; |
| memset(&action, 0, sizeof(struct irqaction)); |
| |
| /* This is a big problem.... since we didn't use request_irq |
| * when kernel/irq.c calls probe_irq_xxx this interrupt will |
| * be probed for usage. This will end up disabling the device :( |
| * Give it a bogus "action" pointer -- this will keep it from |
| * getting auto-probed! |
| * |
| * By setting the status to match that of request_irq() we |
| * can avoid it. --cgray |
| */ |
| action.dev_id = handler; |
| action.flags = IRQF_DISABLED; |
| cpus_clear(action.mask); |
| action.name = "Au1xxx TOY"; |
| action.handler = handler; |
| action.next = NULL; |
| |
| desc->action = &action; |
| desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS); |
| |
| local_enable_irq(AU1000_TOY_MATCH2_INT); |
| } |
| #endif |
| |
| static void setup_local_irq(unsigned int irq_nr, int type, int int_req) |
| { |
| if (irq_nr > AU1000_MAX_INTR) return; |
| /* Config2[n], Config1[n], Config0[n] */ |
| if (irq_nr > AU1000_LAST_INTC0_INT) { |
| switch (type) { |
| case INTC_INT_RISE_EDGE: /* 0:0:1 */ |
| au_writel(1<<(irq_nr-32), IC1_CFG2CLR); |
| au_writel(1<<(irq_nr-32), IC1_CFG1CLR); |
| au_writel(1<<(irq_nr-32), IC1_CFG0SET); |
| set_irq_chip(irq_nr, &rise_edge_irq_type); |
| break; |
| case INTC_INT_FALL_EDGE: /* 0:1:0 */ |
| au_writel(1<<(irq_nr-32), IC1_CFG2CLR); |
| au_writel(1<<(irq_nr-32), IC1_CFG1SET); |
| au_writel(1<<(irq_nr-32), IC1_CFG0CLR); |
| set_irq_chip(irq_nr, &fall_edge_irq_type); |
| break; |
| case INTC_INT_RISE_AND_FALL_EDGE: /* 0:1:1 */ |
| au_writel(1<<(irq_nr-32), IC1_CFG2CLR); |
| au_writel(1<<(irq_nr-32), IC1_CFG1SET); |
| au_writel(1<<(irq_nr-32), IC1_CFG0SET); |
| set_irq_chip(irq_nr, &either_edge_irq_type); |
| break; |
| case INTC_INT_HIGH_LEVEL: /* 1:0:1 */ |
| au_writel(1<<(irq_nr-32), IC1_CFG2SET); |
| au_writel(1<<(irq_nr-32), IC1_CFG1CLR); |
| au_writel(1<<(irq_nr-32), IC1_CFG0SET); |
| set_irq_chip(irq_nr, &level_irq_type); |
| break; |
| case INTC_INT_LOW_LEVEL: /* 1:1:0 */ |
| au_writel(1<<(irq_nr-32), IC1_CFG2SET); |
| au_writel(1<<(irq_nr-32), IC1_CFG1SET); |
| au_writel(1<<(irq_nr-32), IC1_CFG0CLR); |
| set_irq_chip(irq_nr, &level_irq_type); |
| break; |
| case INTC_INT_DISABLED: /* 0:0:0 */ |
| au_writel(1<<(irq_nr-32), IC1_CFG0CLR); |
| au_writel(1<<(irq_nr-32), IC1_CFG1CLR); |
| au_writel(1<<(irq_nr-32), IC1_CFG2CLR); |
| break; |
| default: /* disable the interrupt */ |
| printk("unexpected int type %d (irq %d)\n", type, irq_nr); |
| au_writel(1<<(irq_nr-32), IC1_CFG0CLR); |
| au_writel(1<<(irq_nr-32), IC1_CFG1CLR); |
| au_writel(1<<(irq_nr-32), IC1_CFG2CLR); |
| return; |
| } |
| if (int_req) /* assign to interrupt request 1 */ |
| au_writel(1<<(irq_nr-32), IC1_ASSIGNCLR); |
| else /* assign to interrupt request 0 */ |
| au_writel(1<<(irq_nr-32), IC1_ASSIGNSET); |
| au_writel(1<<(irq_nr-32), IC1_SRCSET); |
| au_writel(1<<(irq_nr-32), IC1_MASKCLR); |
| au_writel(1<<(irq_nr-32), IC1_WAKECLR); |
| } |
| else { |
| switch (type) { |
| case INTC_INT_RISE_EDGE: /* 0:0:1 */ |
| au_writel(1<<irq_nr, IC0_CFG2CLR); |
| au_writel(1<<irq_nr, IC0_CFG1CLR); |
| au_writel(1<<irq_nr, IC0_CFG0SET); |
| set_irq_chip(irq_nr, &rise_edge_irq_type); |
| break; |
| case INTC_INT_FALL_EDGE: /* 0:1:0 */ |
| au_writel(1<<irq_nr, IC0_CFG2CLR); |
| au_writel(1<<irq_nr, IC0_CFG1SET); |
| au_writel(1<<irq_nr, IC0_CFG0CLR); |
| set_irq_chip(irq_nr, &fall_edge_irq_type); |
| break; |
| case INTC_INT_RISE_AND_FALL_EDGE: /* 0:1:1 */ |
| au_writel(1<<irq_nr, IC0_CFG2CLR); |
| au_writel(1<<irq_nr, IC0_CFG1SET); |
| au_writel(1<<irq_nr, IC0_CFG0SET); |
| set_irq_chip(irq_nr, &either_edge_irq_type); |
| break; |
| case INTC_INT_HIGH_LEVEL: /* 1:0:1 */ |
| au_writel(1<<irq_nr, IC0_CFG2SET); |
| au_writel(1<<irq_nr, IC0_CFG1CLR); |
| au_writel(1<<irq_nr, IC0_CFG0SET); |
| set_irq_chip(irq_nr, &level_irq_type); |
| break; |
| case INTC_INT_LOW_LEVEL: /* 1:1:0 */ |
| au_writel(1<<irq_nr, IC0_CFG2SET); |
| au_writel(1<<irq_nr, IC0_CFG1SET); |
| au_writel(1<<irq_nr, IC0_CFG0CLR); |
| set_irq_chip(irq_nr, &level_irq_type); |
| break; |
| case INTC_INT_DISABLED: /* 0:0:0 */ |
| au_writel(1<<irq_nr, IC0_CFG0CLR); |
| au_writel(1<<irq_nr, IC0_CFG1CLR); |
| au_writel(1<<irq_nr, IC0_CFG2CLR); |
| break; |
| default: /* disable the interrupt */ |
| printk("unexpected int type %d (irq %d)\n", type, irq_nr); |
| au_writel(1<<irq_nr, IC0_CFG0CLR); |
| au_writel(1<<irq_nr, IC0_CFG1CLR); |
| au_writel(1<<irq_nr, IC0_CFG2CLR); |
| return; |
| } |
| if (int_req) /* assign to interrupt request 1 */ |
| au_writel(1<<irq_nr, IC0_ASSIGNCLR); |
| else /* assign to interrupt request 0 */ |
| au_writel(1<<irq_nr, IC0_ASSIGNSET); |
| au_writel(1<<irq_nr, IC0_SRCSET); |
| au_writel(1<<irq_nr, IC0_MASKCLR); |
| au_writel(1<<irq_nr, IC0_WAKECLR); |
| } |
| au_sync(); |
| } |
| |
| |
| void __init arch_init_irq(void) |
| { |
| int i; |
| unsigned long cp0_status; |
| au1xxx_irq_map_t *imp; |
| extern au1xxx_irq_map_t au1xxx_irq_map[]; |
| extern au1xxx_irq_map_t au1xxx_ic0_map[]; |
| extern int au1xxx_nr_irqs; |
| extern int au1xxx_ic0_nr_irqs; |
| |
| cp0_status = read_c0_status(); |
| |
| /* Initialize interrupt controllers to a safe state. |
| */ |
| au_writel(0xffffffff, IC0_CFG0CLR); |
| au_writel(0xffffffff, IC0_CFG1CLR); |
| au_writel(0xffffffff, IC0_CFG2CLR); |
| au_writel(0xffffffff, IC0_MASKCLR); |
| au_writel(0xffffffff, IC0_ASSIGNSET); |
| au_writel(0xffffffff, IC0_WAKECLR); |
| au_writel(0xffffffff, IC0_SRCSET); |
| au_writel(0xffffffff, IC0_FALLINGCLR); |
| au_writel(0xffffffff, IC0_RISINGCLR); |
| au_writel(0x00000000, IC0_TESTBIT); |
| |
| au_writel(0xffffffff, IC1_CFG0CLR); |
| au_writel(0xffffffff, IC1_CFG1CLR); |
| au_writel(0xffffffff, IC1_CFG2CLR); |
| au_writel(0xffffffff, IC1_MASKCLR); |
| au_writel(0xffffffff, IC1_ASSIGNSET); |
| au_writel(0xffffffff, IC1_WAKECLR); |
| au_writel(0xffffffff, IC1_SRCSET); |
| au_writel(0xffffffff, IC1_FALLINGCLR); |
| au_writel(0xffffffff, IC1_RISINGCLR); |
| au_writel(0x00000000, IC1_TESTBIT); |
| |
| /* Initialize IC0, which is fixed per processor. |
| */ |
| imp = au1xxx_ic0_map; |
| for (i=0; i<au1xxx_ic0_nr_irqs; i++) { |
| setup_local_irq(imp->im_irq, imp->im_type, imp->im_request); |
| imp++; |
| } |
| |
| /* Now set up the irq mapping for the board. |
| */ |
| imp = au1xxx_irq_map; |
| for (i=0; i<au1xxx_nr_irqs; i++) { |
| setup_local_irq(imp->im_irq, imp->im_type, imp->im_request); |
| imp++; |
| } |
| |
| set_c0_status(ALLINTS); |
| |
| /* Board specific IRQ initialization. |
| */ |
| if (board_init_irq) |
| (*board_init_irq)(); |
| } |
| |
| |
| /* |
| * Interrupts are nested. Even if an interrupt handler is registered |
| * as "fast", we might get another interrupt before we return from |
| * intcX_reqX_irqdispatch(). |
| */ |
| |
| static void intc0_req0_irqdispatch(void) |
| { |
| int irq = 0; |
| static unsigned long intc0_req0 = 0; |
| |
| intc0_req0 |= au_readl(IC0_REQ0INT); |
| |
| if (!intc0_req0) |
| return; |
| #ifdef AU1000_USB_DEV_REQ_INT |
| /* |
| * Because of the tight timing of SETUP token to reply |
| * transactions, the USB devices-side packet complete |
| * interrupt needs the highest priority. |
| */ |
| if ((intc0_req0 & (1<<AU1000_USB_DEV_REQ_INT))) { |
| intc0_req0 &= ~(1<<AU1000_USB_DEV_REQ_INT); |
| do_IRQ(AU1000_USB_DEV_REQ_INT); |
| return; |
| } |
| #endif |
| irq = au_ffs(intc0_req0) - 1; |
| intc0_req0 &= ~(1<<irq); |
| do_IRQ(irq); |
| } |
| |
| |
| static void intc0_req1_irqdispatch(void) |
| { |
| int irq = 0; |
| static unsigned long intc0_req1 = 0; |
| |
| intc0_req1 |= au_readl(IC0_REQ1INT); |
| |
| if (!intc0_req1) |
| return; |
| |
| irq = au_ffs(intc0_req1) - 1; |
| intc0_req1 &= ~(1<<irq); |
| do_IRQ(irq); |
| } |
| |
| |
| /* |
| * Interrupt Controller 1: |
| * interrupts 32 - 63 |
| */ |
| static void intc1_req0_irqdispatch(void) |
| { |
| int irq = 0; |
| static unsigned long intc1_req0 = 0; |
| |
| intc1_req0 |= au_readl(IC1_REQ0INT); |
| |
| if (!intc1_req0) |
| return; |
| |
| irq = au_ffs(intc1_req0) - 1; |
| intc1_req0 &= ~(1<<irq); |
| irq += 32; |
| do_IRQ(irq); |
| } |
| |
| |
| static void intc1_req1_irqdispatch(void) |
| { |
| int irq = 0; |
| static unsigned long intc1_req1 = 0; |
| |
| intc1_req1 |= au_readl(IC1_REQ1INT); |
| |
| if (!intc1_req1) |
| return; |
| |
| irq = au_ffs(intc1_req1) - 1; |
| intc1_req1 &= ~(1<<irq); |
| irq += 32; |
| do_IRQ(irq); |
| } |
| |
| #ifdef CONFIG_PM |
| |
| /* Save/restore the interrupt controller state. |
| * Called from the save/restore core registers as part of the |
| * au_sleep function in power.c.....maybe I should just pm_register() |
| * them instead? |
| */ |
| static unsigned int sleep_intctl_config0[2]; |
| static unsigned int sleep_intctl_config1[2]; |
| static unsigned int sleep_intctl_config2[2]; |
| static unsigned int sleep_intctl_src[2]; |
| static unsigned int sleep_intctl_assign[2]; |
| static unsigned int sleep_intctl_wake[2]; |
| static unsigned int sleep_intctl_mask[2]; |
| |
| void |
| save_au1xxx_intctl(void) |
| { |
| sleep_intctl_config0[0] = au_readl(IC0_CFG0RD); |
| sleep_intctl_config1[0] = au_readl(IC0_CFG1RD); |
| sleep_intctl_config2[0] = au_readl(IC0_CFG2RD); |
| sleep_intctl_src[0] = au_readl(IC0_SRCRD); |
| sleep_intctl_assign[0] = au_readl(IC0_ASSIGNRD); |
| sleep_intctl_wake[0] = au_readl(IC0_WAKERD); |
| sleep_intctl_mask[0] = au_readl(IC0_MASKRD); |
| |
| sleep_intctl_config0[1] = au_readl(IC1_CFG0RD); |
| sleep_intctl_config1[1] = au_readl(IC1_CFG1RD); |
| sleep_intctl_config2[1] = au_readl(IC1_CFG2RD); |
| sleep_intctl_src[1] = au_readl(IC1_SRCRD); |
| sleep_intctl_assign[1] = au_readl(IC1_ASSIGNRD); |
| sleep_intctl_wake[1] = au_readl(IC1_WAKERD); |
| sleep_intctl_mask[1] = au_readl(IC1_MASKRD); |
| } |
| |
| /* For most restore operations, we clear the entire register and |
| * then set the bits we found during the save. |
| */ |
| void |
| restore_au1xxx_intctl(void) |
| { |
| au_writel(0xffffffff, IC0_MASKCLR); au_sync(); |
| |
| au_writel(0xffffffff, IC0_CFG0CLR); au_sync(); |
| au_writel(sleep_intctl_config0[0], IC0_CFG0SET); au_sync(); |
| au_writel(0xffffffff, IC0_CFG1CLR); au_sync(); |
| au_writel(sleep_intctl_config1[0], IC0_CFG1SET); au_sync(); |
| au_writel(0xffffffff, IC0_CFG2CLR); au_sync(); |
| au_writel(sleep_intctl_config2[0], IC0_CFG2SET); au_sync(); |
| au_writel(0xffffffff, IC0_SRCCLR); au_sync(); |
| au_writel(sleep_intctl_src[0], IC0_SRCSET); au_sync(); |
| au_writel(0xffffffff, IC0_ASSIGNCLR); au_sync(); |
| au_writel(sleep_intctl_assign[0], IC0_ASSIGNSET); au_sync(); |
| au_writel(0xffffffff, IC0_WAKECLR); au_sync(); |
| au_writel(sleep_intctl_wake[0], IC0_WAKESET); au_sync(); |
| au_writel(0xffffffff, IC0_RISINGCLR); au_sync(); |
| au_writel(0xffffffff, IC0_FALLINGCLR); au_sync(); |
| au_writel(0x00000000, IC0_TESTBIT); au_sync(); |
| |
| au_writel(0xffffffff, IC1_MASKCLR); au_sync(); |
| |
| au_writel(0xffffffff, IC1_CFG0CLR); au_sync(); |
| au_writel(sleep_intctl_config0[1], IC1_CFG0SET); au_sync(); |
| au_writel(0xffffffff, IC1_CFG1CLR); au_sync(); |
| au_writel(sleep_intctl_config1[1], IC1_CFG1SET); au_sync(); |
| au_writel(0xffffffff, IC1_CFG2CLR); au_sync(); |
| au_writel(sleep_intctl_config2[1], IC1_CFG2SET); au_sync(); |
| au_writel(0xffffffff, IC1_SRCCLR); au_sync(); |
| au_writel(sleep_intctl_src[1], IC1_SRCSET); au_sync(); |
| au_writel(0xffffffff, IC1_ASSIGNCLR); au_sync(); |
| au_writel(sleep_intctl_assign[1], IC1_ASSIGNSET); au_sync(); |
| au_writel(0xffffffff, IC1_WAKECLR); au_sync(); |
| au_writel(sleep_intctl_wake[1], IC1_WAKESET); au_sync(); |
| au_writel(0xffffffff, IC1_RISINGCLR); au_sync(); |
| au_writel(0xffffffff, IC1_FALLINGCLR); au_sync(); |
| au_writel(0x00000000, IC1_TESTBIT); au_sync(); |
| |
| au_writel(sleep_intctl_mask[1], IC1_MASKSET); au_sync(); |
| |
| au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync(); |
| } |
| #endif /* CONFIG_PM */ |
| |
| asmlinkage void plat_irq_dispatch(void) |
| { |
| unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; |
| |
| if (pending & CAUSEF_IP7) |
| mips_timer_interrupt(); |
| else if (pending & CAUSEF_IP2) |
| intc0_req0_irqdispatch(); |
| else if (pending & CAUSEF_IP3) |
| intc0_req1_irqdispatch(); |
| else if (pending & CAUSEF_IP4) |
| intc1_req0_irqdispatch(); |
| else if (pending & CAUSEF_IP5) |
| intc1_req1_irqdispatch(); |
| else |
| spurious_interrupt(); |
| } |