USB: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 856e4d9..0d412ed 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -290,7 +290,7 @@
return status;
if (status != size) {
dbg ("%s - wanted to write %d, but only wrote %d",
- __FUNCTION__, size, status);
+ __func__, size, status);
return -ECOMM;
}
return 0;
@@ -320,7 +320,7 @@
return status;
if (status != size) {
dbg ("%s - wanted to write %d, but only wrote %d",
- __FUNCTION__, size, status);
+ __func__, size, status);
return -ECOMM;
}
return 0;
@@ -344,7 +344,7 @@
{
int port_number = port->number - port->serial->minor;
- dbg ("%s - port %d, mask %x", __FUNCTION__, port_number, mask);
+ dbg ("%s - port %d, mask %x", __func__, port_number, mask);
return TIWriteCommandSync (port->serial->dev,
UMPC_PURGE_PORT,
@@ -369,7 +369,7 @@
__u8 read_length;
__be16 be_start_address;
- dbg ("%s - @ %x for %d", __FUNCTION__, start_address, length);
+ dbg ("%s - @ %x for %d", __func__, start_address, length);
/* Read in blocks of 64 bytes
* (TI firmware can't handle more than 64 byte reads)
@@ -381,7 +381,7 @@
read_length = (__u8)length;
if (read_length > 1) {
- dbg ("%s - @ %x for %d", __FUNCTION__,
+ dbg ("%s - @ %x for %d", __func__,
start_address, read_length);
}
be_start_address = cpu_to_be16 (start_address);
@@ -393,12 +393,12 @@
read_length); // TransferBufferLength
if (status) {
- dbg ("%s - ERROR %x", __FUNCTION__, status);
+ dbg ("%s - ERROR %x", __func__, status);
return status;
}
if (read_length > 1) {
- usb_serial_debug_data(debug, &dev->dev, __FUNCTION__,
+ usb_serial_debug_data(debug, &dev->dev, __func__,
read_length, buffer);
}
@@ -434,13 +434,13 @@
&buffer[i], // TransferBuffer
0x01); // TransferBufferLength
if (status) {
- dbg ("%s - ERROR %x", __FUNCTION__, status);
+ dbg ("%s - ERROR %x", __func__, status);
return status;
}
}
- dbg ("%s - start_address = %x, length = %d", __FUNCTION__, start_address, length);
- usb_serial_debug_data(debug, &serial->serial->dev->dev, __FUNCTION__, length, buffer);
+ dbg ("%s - start_address = %x, length = %d", __func__, start_address, length);
+ usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, length, buffer);
serial->TiReadI2C = 1;
@@ -472,8 +472,8 @@
return status;
}
- dbg ("%s - start_sddr = %x, length = %d", __FUNCTION__, start_address, length);
- usb_serial_debug_data(debug, &serial->serial->dev->dev, __FUNCTION__, length, buffer);
+ dbg ("%s - start_sddr = %x, length = %d", __func__, start_address, length);
+ usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, length, buffer);
return status;
}
@@ -494,8 +494,8 @@
if (write_length > length)
write_length = length;
- dbg ("%s - BytesInFirstPage Addr = %x, length = %d", __FUNCTION__, start_address, write_length);
- usb_serial_debug_data(debug, &serial->serial->dev->dev, __FUNCTION__, write_length, buffer);
+ dbg ("%s - BytesInFirstPage Addr = %x, length = %d", __func__, start_address, write_length);
+ usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, write_length, buffer);
/* Write first page */
be_start_address = cpu_to_be16 (start_address);
@@ -506,7 +506,7 @@
buffer, // TransferBuffer
write_length);
if (status) {
- dbg ("%s - ERROR %d", __FUNCTION__, status);
+ dbg ("%s - ERROR %d", __func__, status);
return status;
}
@@ -521,8 +521,8 @@
else
write_length = length;
- dbg ("%s - Page Write Addr = %x, length = %d", __FUNCTION__, start_address, write_length);
- usb_serial_debug_data(debug, &serial->serial->dev->dev, __FUNCTION__, write_length, buffer);
+ dbg ("%s - Page Write Addr = %x, length = %d", __func__, start_address, write_length);
+ usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, write_length, buffer);
/* Write next page */
be_start_address = cpu_to_be16 (start_address);
@@ -533,7 +533,7 @@
buffer, // TransferBuffer
write_length); // TransferBufferLength
if (status) {
- dev_err (&serial->serial->dev->dev, "%s - ERROR %d\n", __FUNCTION__, status);
+ dev_err (&serial->serial->dev->dev, "%s - ERROR %d\n", __func__, status);
return status;
}
@@ -559,7 +559,7 @@
oedb = kmalloc (sizeof (* oedb), GFP_KERNEL);
if (!oedb) {
- dev_err (&port->port->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (&port->port->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
@@ -579,7 +579,7 @@
if (status)
goto exit_is_tx_active;
- dbg ("%s - XByteCount 0x%X", __FUNCTION__, oedb->XByteCount);
+ dbg ("%s - XByteCount 0x%X", __func__, oedb->XByteCount);
/* and the LSR */
status = TIReadRam (port->port->serial->dev,
@@ -589,7 +589,7 @@
if (status)
goto exit_is_tx_active;
- dbg ("%s - LSR = 0x%X", __FUNCTION__, *lsr);
+ dbg ("%s - LSR = 0x%X", __func__, *lsr);
/* If either buffer has data or we are transmitting then return TRUE */
if ((oedb->XByteCount & 0x80 ) != 0 )
@@ -600,7 +600,7 @@
/* We return Not Active if we get any kind of error */
exit_is_tx_active:
- dbg ("%s - return %d", __FUNCTION__, bytes_left );
+ dbg ("%s - return %d", __func__, bytes_left );
kfree(lsr);
kfree(oedb);
@@ -664,11 +664,11 @@
// we want. However, we just support one config at this point,
// configuration # 1, which is Config Descriptor 0.
- dbg ("%s - Number of Interfaces = %d", __FUNCTION__, dev->config->desc.bNumInterfaces);
- dbg ("%s - MAX Power = %d", __FUNCTION__, dev->config->desc.bMaxPower*2);
+ dbg ("%s - Number of Interfaces = %d", __func__, dev->config->desc.bNumInterfaces);
+ dbg ("%s - MAX Power = %d", __func__, dev->config->desc.bMaxPower*2);
if (dev->config->desc.bNumInterfaces != 1) {
- dev_err (&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __FUNCTION__);
+ dev_err (&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __func__);
return -ENODEV;
}
@@ -751,7 +751,7 @@
cs = (__u8)(cs + buffer[i]);
}
if (cs != rom_desc->CheckSum) {
- dbg ("%s - Mismatch %x - %x", __FUNCTION__, rom_desc->CheckSum, cs);
+ dbg ("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs);
return -EINVAL;
}
return 0;
@@ -769,12 +769,12 @@
rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL);
if (!rom_desc) {
- dev_err (dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
buffer = kmalloc (TI_MAX_I2C_SIZE, GFP_KERNEL);
if (!buffer) {
- dev_err (dev, "%s - out of memory when allocating buffer\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory when allocating buffer\n", __func__);
kfree (rom_desc);
return -ENOMEM;
}
@@ -785,7 +785,7 @@
goto ExitTiValidateI2cImage;
if (*buffer != UMP5152 && *buffer != UMP3410) {
- dev_err (dev, "%s - invalid buffer signature\n", __FUNCTION__);
+ dev_err (dev, "%s - invalid buffer signature\n", __func__);
status = -ENODEV;
goto ExitTiValidateI2cImage;
}
@@ -801,11 +801,11 @@
if ((start_address + sizeof(struct ti_i2c_desc) + rom_desc->Size) > TI_MAX_I2C_SIZE) {
status = -ENODEV;
- dbg ("%s - structure too big, erroring out.", __FUNCTION__);
+ dbg ("%s - structure too big, erroring out.", __func__);
break;
}
- dbg ("%s Type = 0x%x", __FUNCTION__, rom_desc->Type);
+ dbg ("%s Type = 0x%x", __func__, rom_desc->Type);
// Skip type 2 record
ttype = rom_desc->Type & 0x0f;
@@ -845,13 +845,13 @@
rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL);
if (!rom_desc) {
- dev_err (&serial->serial->dev->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (&serial->serial->dev->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
start_address = TIGetDescriptorAddress (serial, I2C_DESC_TYPE_ION, rom_desc);
if (!start_address) {
- dbg ("%s - Edge Descriptor not found in I2C", __FUNCTION__);
+ dbg ("%s - Edge Descriptor not found in I2C", __func__);
status = -ENODEV;
goto exit;
}
@@ -867,12 +867,12 @@
status = ValidChecksum(rom_desc, buffer);
desc = (struct edge_ti_manuf_descriptor *)buffer;
- dbg ( "%s - IonConfig 0x%x", __FUNCTION__, desc->IonConfig );
- dbg ( "%s - Version %d", __FUNCTION__, desc->Version );
- dbg ( "%s - Cpu/Board 0x%x", __FUNCTION__, desc->CpuRev_BoardRev );
- dbg ( "%s - NumPorts %d", __FUNCTION__, desc->NumPorts );
- dbg ( "%s - NumVirtualPorts %d", __FUNCTION__, desc->NumVirtualPorts );
- dbg ( "%s - TotalPorts %d", __FUNCTION__, desc->TotalPorts );
+ dbg ( "%s - IonConfig 0x%x", __func__, desc->IonConfig );
+ dbg ( "%s - Version %d", __func__, desc->Version );
+ dbg ( "%s - Cpu/Board 0x%x", __func__, desc->CpuRev_BoardRev );
+ dbg ( "%s - NumPorts %d", __func__, desc->NumPorts );
+ dbg ( "%s - NumVirtualPorts %d", __func__, desc->NumVirtualPorts );
+ dbg ( "%s - TotalPorts %d", __func__, desc->TotalPorts );
exit:
kfree (rom_desc);
@@ -902,7 +902,7 @@
buffer = kmalloc (buffer_size, GFP_KERNEL);
if (!buffer) {
- dev_err (dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
@@ -955,11 +955,11 @@
&data, // TransferBuffer
0x01); // TransferBufferLength
if (status)
- dbg ("%s - read 2 status error = %d", __FUNCTION__, status);
+ dbg ("%s - read 2 status error = %d", __func__, status);
else
- dbg ("%s - read 2 data = 0x%x", __FUNCTION__, data);
+ dbg ("%s - read 2 data = 0x%x", __func__, data);
if ((!status) && (data == UMP5152 || data == UMP3410)) {
- dbg ("%s - ROM_TYPE_II", __FUNCTION__);
+ dbg ("%s - ROM_TYPE_II", __func__);
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
return 0;
}
@@ -972,16 +972,16 @@
&data, // TransferBuffer
0x01); // TransferBufferLength
if (status)
- dbg ("%s - read 3 status error = %d", __FUNCTION__, status);
+ dbg ("%s - read 3 status error = %d", __func__, status);
else
- dbg ("%s - read 2 data = 0x%x", __FUNCTION__, data);
+ dbg ("%s - read 2 data = 0x%x", __func__, data);
if ((!status) && (data == UMP5152 || data == UMP3410)) {
- dbg ("%s - ROM_TYPE_III", __FUNCTION__);
+ dbg ("%s - ROM_TYPE_III", __func__);
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III;
return 0;
}
- dbg ("%s - Unknown", __FUNCTION__);
+ dbg ("%s - Unknown", __func__);
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
return -ENODEV;
}
@@ -1063,7 +1063,7 @@
interface = &serial->serial->interface->cur_altsetting->desc;
if (!interface) {
- dev_err (dev, "%s - no interface set, error!\n", __FUNCTION__);
+ dev_err (dev, "%s - no interface set, error!\n", __func__);
return -ENODEV;
}
@@ -1099,7 +1099,7 @@
*/
ti_manuf_desc = kmalloc (sizeof (*ti_manuf_desc), GFP_KERNEL);
if (!ti_manuf_desc) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
return -ENOMEM;
}
status = TIReadManufDescriptor (serial, (__u8 *)ti_manuf_desc);
@@ -1110,7 +1110,7 @@
// Check version number of ION descriptor
if (!ignore_cpu_rev && TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev) < 2) {
- dbg ( "%s - Wrong CPU Rev %d (Must be 2)", __FUNCTION__,
+ dbg ( "%s - Wrong CPU Rev %d (Must be 2)", __func__,
TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev));
kfree (ti_manuf_desc);
return -EINVAL;
@@ -1118,7 +1118,7 @@
rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL);
if (!rom_desc) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
kfree (ti_manuf_desc);
return -ENOMEM;
}
@@ -1128,11 +1128,11 @@
struct ti_i2c_firmware_rec *firmware_version;
__u8 record;
- dbg ("%s - Found Type FIRMWARE (Type 2) record", __FUNCTION__);
+ dbg ("%s - Found Type FIRMWARE (Type 2) record", __func__);
firmware_version = kmalloc (sizeof (*firmware_version), GFP_KERNEL);
if (!firmware_version) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
kfree (rom_desc);
kfree (ti_manuf_desc);
return -ENOMEM;
@@ -1158,7 +1158,7 @@
(OperationalCodeImageVersion.MinorVersion);
dbg ("%s - >>>Firmware Versions Device %d.%d Driver %d.%d",
- __FUNCTION__,
+ __func__,
firmware_version->Ver_Major,
firmware_version->Ver_Minor,
OperationalCodeImageVersion.MajorVersion,
@@ -1167,7 +1167,7 @@
// Check if we have an old version in the I2C and update if necessary
if (download_cur_ver != download_new_ver) {
dbg ("%s - Update I2C Download from %d.%d to %d.%d",
- __FUNCTION__,
+ __func__,
firmware_version->Ver_Major,
firmware_version->Ver_Minor,
OperationalCodeImageVersion.MajorVersion,
@@ -1209,14 +1209,14 @@
}
if (record != I2C_DESC_TYPE_FIRMWARE_BLANK) {
- dev_err (dev, "%s - error resetting device\n", __FUNCTION__);
+ dev_err (dev, "%s - error resetting device\n", __func__);
kfree (firmware_version);
kfree (rom_desc);
kfree (ti_manuf_desc);
return -ENODEV;
}
- dbg ("%s - HARDWARE RESET", __FUNCTION__);
+ dbg ("%s - HARDWARE RESET", __func__);
// Reset UMP -- Back to BOOT MODE
status = TISendVendorRequestSync (serial->serial->dev,
@@ -1226,7 +1226,7 @@
NULL, // TransferBuffer
0); // TransferBufferLength
- dbg ( "%s - HARDWARE RESET return %d", __FUNCTION__, status);
+ dbg ( "%s - HARDWARE RESET return %d", __func__, status);
/* return an error on purpose. */
kfree (firmware_version);
@@ -1244,7 +1244,7 @@
header = kmalloc (HEADER_SIZE, GFP_KERNEL);
if (!header) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
kfree (rom_desc);
kfree (ti_manuf_desc);
return -ENOMEM;
@@ -1252,14 +1252,14 @@
vheader = kmalloc (HEADER_SIZE, GFP_KERNEL);
if (!vheader) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
kfree (header);
kfree (rom_desc);
kfree (ti_manuf_desc);
return -ENOMEM;
}
- dbg ("%s - Found Type BLANK FIRMWARE (Type F2) record", __FUNCTION__);
+ dbg ("%s - Found Type BLANK FIRMWARE (Type F2) record", __func__);
// In order to update the I2C firmware we must change the type 2 record to type 0xF2.
// This will force the UMP to come up in Boot Mode. Then while in boot mode, the driver
@@ -1297,7 +1297,7 @@
vheader);
if (status) {
- dbg ("%s - can't read header back", __FUNCTION__);
+ dbg ("%s - can't read header back", __func__);
kfree (vheader);
kfree (header);
kfree (rom_desc);
@@ -1305,7 +1305,7 @@
return status;
}
if (memcmp(vheader, header, HEADER_SIZE)) {
- dbg ("%s - write download record failed", __FUNCTION__);
+ dbg ("%s - write download record failed", __func__);
kfree (vheader);
kfree (header);
kfree (rom_desc);
@@ -1316,7 +1316,7 @@
kfree (vheader);
kfree (header);
- dbg ("%s - Start firmware update", __FUNCTION__);
+ dbg ("%s - Start firmware update", __func__);
// Tell firmware to copy download image into I2C
status = TISendVendorRequestSync (serial->serial->dev,
@@ -1326,9 +1326,9 @@
NULL, // TransferBuffer
0); // TransferBufferLength
- dbg ("%s - Update complete 0x%x", __FUNCTION__, status);
+ dbg ("%s - Update complete 0x%x", __func__, status);
if (status) {
- dev_err (dev, "%s - UMPC_COPY_DNLD_TO_I2C failed\n", __FUNCTION__);
+ dev_err (dev, "%s - UMPC_COPY_DNLD_TO_I2C failed\n", __func__);
kfree (rom_desc);
kfree (ti_manuf_desc);
return status;
@@ -1352,7 +1352,7 @@
return status;
if (le16_to_cpu(serial->serial->dev->descriptor.idVendor) != USB_VENDOR_ID_ION) {
- dbg ("%s - VID = 0x%x", __FUNCTION__,
+ dbg ("%s - VID = 0x%x", __func__,
le16_to_cpu(serial->serial->dev->descriptor.idVendor));
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
goto StayInBootMode;
@@ -1366,7 +1366,7 @@
// Registry variable set?
if (TIStayInBootMode) {
- dbg ("%s - TIStayInBootMode", __FUNCTION__);
+ dbg ("%s - TIStayInBootMode", __func__);
goto StayInBootMode;
}
@@ -1383,7 +1383,7 @@
*/
ti_manuf_desc = kmalloc (sizeof (*ti_manuf_desc), GFP_KERNEL);
if (!ti_manuf_desc) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
return -ENOMEM;
}
status = TIReadManufDescriptor (serial, (__u8 *)ti_manuf_desc);
@@ -1394,7 +1394,7 @@
// Check for version 2
if (!ignore_cpu_rev && TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev) < 2) {
- dbg ("%s - Wrong CPU Rev %d (Must be 2)", __FUNCTION__,
+ dbg ("%s - Wrong CPU Rev %d (Must be 2)", __func__,
TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev));
kfree (ti_manuf_desc);
goto StayInBootMode;
@@ -1418,7 +1418,7 @@
buffer_size = (((1024 * 16) - 512) + sizeof(struct ti_i2c_image_header));
buffer = kmalloc (buffer_size, GFP_KERNEL);
if (!buffer) {
- dev_err (dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
@@ -1438,20 +1438,20 @@
header->CheckSum = cs;
// Download the operational code
- dbg ("%s - Downloading operational code image (TI UMP)", __FUNCTION__);
+ dbg ("%s - Downloading operational code image (TI UMP)", __func__);
status = TIDownloadCodeImage (serial, buffer, buffer_size);
kfree (buffer);
if (status) {
- dbg ("%s - Error downloading operational code image", __FUNCTION__);
+ dbg ("%s - Error downloading operational code image", __func__);
return status;
}
// Device will reboot
serial->product_info.TiMode = TI_MODE_TRANSITIONING;
- dbg ("%s - Download successful -- Device rebooting...", __FUNCTION__);
+ dbg ("%s - Download successful -- Device rebooting...", __func__);
/* return an error on purpose */
return -ENODEV;
@@ -1470,7 +1470,7 @@
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
port->shadow_mcr |= MCR_DTR;
return TIWriteCommandSync (port->port->serial->dev,
@@ -1485,7 +1485,7 @@
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
port->shadow_mcr &= ~MCR_DTR;
return TIWriteCommandSync (port->port->serial->dev,
@@ -1500,7 +1500,7 @@
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
port->shadow_mcr |= MCR_RTS;
return TIWriteCommandSync (port->port->serial->dev,
@@ -1515,7 +1515,7 @@
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
port->shadow_mcr &= ~MCR_RTS;
return TIWriteCommandSync (port->port->serial->dev,
@@ -1530,7 +1530,7 @@
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
return TIWriteCommandSync (port->port->serial->dev,
UMPC_SET_CLR_LOOPBACK,
@@ -1544,7 +1544,7 @@
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
return TIWriteCommandSync (port->port->serial->dev,
UMPC_SET_CLR_LOOPBACK,
@@ -1558,7 +1558,7 @@
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
return TIWriteCommandSync (port->port->serial->dev,
UMPC_SET_CLR_BREAK,
@@ -1572,7 +1572,7 @@
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
return TIWriteCommandSync (port->port->serial->dev,
UMPC_SET_CLR_BREAK,
@@ -1586,7 +1586,7 @@
{
int status = 0;
- dbg ("%s - %x", __FUNCTION__, mcr);
+ dbg ("%s - %x", __func__, mcr);
if (mcr & MCR_DTR)
status = TISetDtr (port);
@@ -1640,7 +1640,7 @@
struct async_icount *icount;
struct tty_struct *tty;
- dbg ("%s - %02x", __FUNCTION__, msr);
+ dbg ("%s - %02x", __func__, msr);
if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
icount = &edge_port->icount;
@@ -1679,7 +1679,7 @@
struct async_icount *icount;
__u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
- dbg ("%s - %02x", __FUNCTION__, new_lsr);
+ dbg ("%s - %02x", __func__, new_lsr);
edge_port->shadow_lsr = lsr;
@@ -1722,7 +1722,7 @@
__u8 msr;
int status = urb->status;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
switch (status) {
case 0:
@@ -1733,34 +1733,34 @@
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dev_err(&urb->dev->dev, "%s - nonzero urb status received: "
- "%d\n", __FUNCTION__, status);
+ "%d\n", __func__, status);
goto exit;
}
if (!length) {
- dbg ("%s - no data in urb", __FUNCTION__);
+ dbg ("%s - no data in urb", __func__);
goto exit;
}
- usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __FUNCTION__, length, data);
+ usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, length, data);
if (length != 2) {
- dbg ("%s - expecting packet of size 2, got %d", __FUNCTION__, length);
+ dbg ("%s - expecting packet of size 2, got %d", __func__, length);
goto exit;
}
port_number = TIUMP_GET_PORT_FROM_CODE (data[0]);
function = TIUMP_GET_FUNC_FROM_CODE (data[0]);
dbg ("%s - port_number %d, function %d, info 0x%x",
- __FUNCTION__, port_number, function, data[1]);
+ __func__, port_number, function, data[1]);
port = edge_serial->serial->port[port_number];
edge_port = usb_get_serial_port_data(port);
if (!edge_port) {
- dbg ("%s - edge_port not found", __FUNCTION__);
+ dbg ("%s - edge_port not found", __func__);
return;
}
switch (function) {
@@ -1769,12 +1769,12 @@
if (lsr & UMP_UART_LSR_DATA_MASK) {
/* Save the LSR event for bulk read completion routine */
dbg ("%s - LSR Event Port %u LSR Status = %02x",
- __FUNCTION__, port_number, lsr);
+ __func__, port_number, lsr);
edge_port->lsr_event = 1;
edge_port->lsr_mask = lsr;
} else {
dbg ("%s - ===== Port %d LSR Status = %02x ======",
- __FUNCTION__, port_number, lsr);
+ __func__, port_number, lsr);
handle_new_lsr (edge_port, 0, lsr, 0);
}
break;
@@ -1783,13 +1783,13 @@
/* Copy MSR from UMP */
msr = data[1];
dbg ("%s - ===== Port %u MSR Status = %02x ======\n",
- __FUNCTION__, port_number, msr);
+ __func__, port_number, msr);
handle_new_msr (edge_port, msr);
break;
default:
dev_err (&urb->dev->dev, "%s - Unknown Interrupt code from UMP %x\n",
- __FUNCTION__, data[1]);
+ __func__, data[1]);
break;
}
@@ -1798,7 +1798,7 @@
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
dev_err (&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
}
static void edge_bulk_in_callback (struct urb *urb)
@@ -1810,7 +1810,7 @@
int port_number;
int status = urb->status;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
switch (status) {
case 0:
@@ -1821,18 +1821,18 @@
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dev_err (&urb->dev->dev,"%s - nonzero read bulk status received: %d\n",
- __FUNCTION__, status);
+ __func__, status);
}
if (status == -EPIPE)
goto exit;
if (status) {
- dev_err(&urb->dev->dev,"%s - stopping read!\n", __FUNCTION__);
+ dev_err(&urb->dev->dev,"%s - stopping read!\n", __func__);
return;
}
@@ -1841,7 +1841,7 @@
if (edge_port->lsr_event) {
edge_port->lsr_event = 0;
dbg ("%s ===== Port %u LSR Status = %02x, Data = %02x ======",
- __FUNCTION__, port_number, edge_port->lsr_mask, *data);
+ __func__, port_number, edge_port->lsr_mask, *data);
handle_new_lsr (edge_port, 1, edge_port->lsr_mask, *data);
/* Adjust buffer length/pointer */
--urb->actual_length;
@@ -1850,10 +1850,10 @@
tty = edge_port->port->tty;
if (tty && urb->actual_length) {
- usb_serial_debug_data(debug, &edge_port->port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &edge_port->port->dev, __func__, urb->actual_length, data);
if (edge_port->close_pending) {
- dbg ("%s - close is pending, dropping data on the floor.", __FUNCTION__);
+ dbg ("%s - close is pending, dropping data on the floor.", __func__);
} else {
edge_tty_recv(&edge_port->port->dev, tty, data, urb->actual_length);
}
@@ -1872,7 +1872,7 @@
spin_unlock(&edge_port->ep_lock);
if (retval)
dev_err (&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
}
static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned char *data, int length)
@@ -1883,7 +1883,7 @@
cnt = tty_buffer_request_room(tty, length);
if (cnt < length) {
dev_err(dev, "%s - dropping data, %d bytes lost\n",
- __FUNCTION__, length - cnt);
+ __func__, length - cnt);
if(cnt == 0)
break;
}
@@ -1901,7 +1901,7 @@
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int status = urb->status;
- dbg ("%s - port %d", __FUNCTION__, port->number);
+ dbg ("%s - port %d", __func__, port->number);
edge_port->ep_write_urb_in_use = 0;
@@ -1914,11 +1914,11 @@
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dev_err(&urb->dev->dev, "%s - nonzero write bulk status "
- "received: %d\n", __FUNCTION__, status);
+ "received: %d\n", __func__, status);
}
/* send any buffered data */
@@ -1936,7 +1936,7 @@
u16 open_settings;
u8 transaction_timeout;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return -ENODEV;
@@ -1959,7 +1959,7 @@
}
dbg ("%s - port_number = %d, uart_base = %04x, dma_address = %04x",
- __FUNCTION__, port_number, edge_port->uart_base, edge_port->dma_address);
+ __func__, port_number, edge_port->uart_base, edge_port->dma_address);
dev = port->serial->dev;
@@ -1970,7 +1970,7 @@
status = TIClearLoopBack (edge_port);
if (status) {
dev_err(&port->dev,"%s - cannot send clear loopback command, %d\n",
- __FUNCTION__, status);
+ __func__, status);
return status;
}
@@ -1989,7 +1989,7 @@
UMP_PIPE_TRANS_TIMEOUT_ENA |
(transaction_timeout << 2));
- dbg ("%s - Sending UMPC_OPEN_PORT", __FUNCTION__);
+ dbg ("%s - Sending UMPC_OPEN_PORT", __func__);
/* Tell TI to open and start the port */
status = TIWriteCommandSync (dev,
@@ -1999,7 +1999,7 @@
NULL,
0);
if (status) {
- dev_err(&port->dev,"%s - cannot send open command, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev,"%s - cannot send open command, %d\n", __func__, status);
return status;
}
@@ -2011,14 +2011,14 @@
NULL,
0);
if (status) {
- dev_err(&port->dev,"%s - cannot send start DMA command, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev,"%s - cannot send start DMA command, %d\n", __func__, status);
return status;
}
/* Clear TX and RX buffers in UMP */
status = TIPurgeDataSync (port, UMP_PORT_DIR_OUT | UMP_PORT_DIR_IN);
if (status) {
- dev_err(&port->dev,"%s - cannot send clear buffers command, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev,"%s - cannot send clear buffers command, %d\n", __func__, status);
return status;
}
@@ -2030,7 +2030,7 @@
&edge_port->shadow_msr, // TransferBuffer
1); // TransferBufferLength
if (status) {
- dev_err(&port->dev,"%s - cannot send read MSR command, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev,"%s - cannot send read MSR command, %d\n", __func__, status);
return status;
}
@@ -2047,7 +2047,7 @@
/* we are the first port to be opened, let's post the interrupt urb */
urb = edge_serial->serial->port[0]->interrupt_in_urb;
if (!urb) {
- dev_err (&port->dev, "%s - no interrupt urb present, exiting\n", __FUNCTION__);
+ dev_err (&port->dev, "%s - no interrupt urb present, exiting\n", __func__);
status = -EINVAL;
goto release_es_lock;
}
@@ -2056,7 +2056,7 @@
urb->dev = dev;
status = usb_submit_urb (urb, GFP_KERNEL);
if (status) {
- dev_err (&port->dev, "%s - usb_submit_urb failed with value %d\n", __FUNCTION__, status);
+ dev_err (&port->dev, "%s - usb_submit_urb failed with value %d\n", __func__, status);
goto release_es_lock;
}
}
@@ -2071,7 +2071,7 @@
/* start up our bulk read urb */
urb = port->read_urb;
if (!urb) {
- dev_err (&port->dev, "%s - no read urb present, exiting\n", __FUNCTION__);
+ dev_err (&port->dev, "%s - no read urb present, exiting\n", __func__);
status = -EINVAL;
goto unlink_int_urb;
}
@@ -2081,13 +2081,13 @@
urb->dev = dev;
status = usb_submit_urb (urb, GFP_KERNEL);
if (status) {
- dev_err (&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __FUNCTION__, status);
+ dev_err (&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __func__, status);
goto unlink_int_urb;
}
++edge_serial->num_ports_open;
- dbg("%s - exited", __FUNCTION__);
+ dbg("%s - exited", __func__);
goto release_es_lock;
@@ -2106,7 +2106,7 @@
int port_number;
int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
edge_serial = usb_get_serial_data(port->serial);
edge_port = usb_get_serial_port_data(port);
@@ -2126,7 +2126,7 @@
/* assuming we can still talk to the device,
* send a close port command to it */
- dbg("%s - send umpc_close_port", __FUNCTION__);
+ dbg("%s - send umpc_close_port", __func__);
port_number = port->number - port->serial->minor;
status = TIWriteCommandSync (port->serial->dev,
UMPC_CLOSE_PORT,
@@ -2144,7 +2144,7 @@
mutex_unlock(&edge_serial->es_lock);
edge_port->close_pending = 0;
- dbg("%s - exited", __FUNCTION__);
+ dbg("%s - exited", __func__);
}
static int edge_write (struct usb_serial_port *port, const unsigned char *data, int count)
@@ -2152,10 +2152,10 @@
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (count == 0) {
- dbg("%s - write request of 0 bytes", __FUNCTION__);
+ dbg("%s - write request of 0 bytes", __func__);
return 0;
}
@@ -2181,7 +2181,7 @@
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&edge_port->ep_lock, flags);
@@ -2203,7 +2203,7 @@
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, count, port->write_urb->transfer_buffer);
/* set up our urb */
usb_fill_bulk_urb (port->write_urb, port->serial->dev,
@@ -2216,7 +2216,7 @@
/* send the data out the bulk port */
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result);
edge_port->ep_write_urb_in_use = 0;
// TODO: reschedule edge_send
} else {
@@ -2237,7 +2237,7 @@
int room = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return -ENODEV;
@@ -2248,7 +2248,7 @@
room = edge_buf_space_avail(edge_port->ep_out_buf);
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return room;
}
@@ -2258,7 +2258,7 @@
int chars = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return -ENODEV;
@@ -2269,7 +2269,7 @@
chars = edge_buf_data_avail(edge_port->ep_out_buf);
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- dbg ("%s - returns %d", __FUNCTION__, chars);
+ dbg ("%s - returns %d", __func__, chars);
return chars;
}
@@ -2279,14 +2279,14 @@
struct tty_struct *tty;
int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return;
tty = port->tty;
if (!tty) {
- dbg ("%s - no tty available", __FUNCTION__);
+ dbg ("%s - no tty available", __func__);
return;
}
@@ -2295,7 +2295,7 @@
unsigned char stop_char = STOP_CHAR(tty);
status = edge_write (port, &stop_char, 1);
if (status <= 0) {
- dev_err(&port->dev, "%s - failed to write stop character, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - failed to write stop character, %d\n", __func__, status);
}
}
@@ -2312,14 +2312,14 @@
struct tty_struct *tty;
int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return;
tty = port->tty;
if (!tty) {
- dbg ("%s - no tty available", __FUNCTION__);
+ dbg ("%s - no tty available", __func__);
return;
}
@@ -2328,7 +2328,7 @@
unsigned char start_char = START_CHAR(tty);
status = edge_write (port, &start_char, 1);
if (status <= 0) {
- dev_err(&port->dev, "%s - failed to write start character, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - failed to write start character, %d\n", __func__, status);
}
}
@@ -2337,7 +2337,7 @@
if (C_CRTSCTS(tty)) {
status = restart_read(edge_port);
if (status)
- dev_err(&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __func__, status);
}
}
@@ -2387,13 +2387,13 @@
int status;
int port_number = edge_port->port->number - edge_port->port->serial->minor;
- dbg("%s - port %d", __FUNCTION__, edge_port->port->number);
+ dbg("%s - port %d", __func__, edge_port->port->number);
tty = edge_port->port->tty;
config = kmalloc (sizeof (*config), GFP_KERNEL);
if (!config) {
- dev_err (&edge_port->port->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (&edge_port->port->dev, "%s - out of memory\n", __func__);
return;
}
@@ -2409,20 +2409,20 @@
switch (cflag & CSIZE) {
case CS5:
config->bDataBits = UMP_UART_CHAR5BITS;
- dbg ("%s - data bits = 5", __FUNCTION__);
+ dbg ("%s - data bits = 5", __func__);
break;
case CS6:
config->bDataBits = UMP_UART_CHAR6BITS;
- dbg ("%s - data bits = 6", __FUNCTION__);
+ dbg ("%s - data bits = 6", __func__);
break;
case CS7:
config->bDataBits = UMP_UART_CHAR7BITS;
- dbg ("%s - data bits = 7", __FUNCTION__);
+ dbg ("%s - data bits = 7", __func__);
break;
default:
case CS8:
config->bDataBits = UMP_UART_CHAR8BITS;
- dbg ("%s - data bits = 8", __FUNCTION__);
+ dbg ("%s - data bits = 8", __func__);
break;
}
@@ -2430,32 +2430,32 @@
if (cflag & PARODD) {
config->wFlags |= UMP_MASK_UART_FLAGS_PARITY;
config->bParity = UMP_UART_ODDPARITY;
- dbg("%s - parity = odd", __FUNCTION__);
+ dbg("%s - parity = odd", __func__);
} else {
config->wFlags |= UMP_MASK_UART_FLAGS_PARITY;
config->bParity = UMP_UART_EVENPARITY;
- dbg("%s - parity = even", __FUNCTION__);
+ dbg("%s - parity = even", __func__);
}
} else {
config->bParity = UMP_UART_NOPARITY;
- dbg("%s - parity = none", __FUNCTION__);
+ dbg("%s - parity = none", __func__);
}
if (cflag & CSTOPB) {
config->bStopBits = UMP_UART_STOPBIT2;
- dbg("%s - stop bits = 2", __FUNCTION__);
+ dbg("%s - stop bits = 2", __func__);
} else {
config->bStopBits = UMP_UART_STOPBIT1;
- dbg("%s - stop bits = 1", __FUNCTION__);
+ dbg("%s - stop bits = 1", __func__);
}
/* figure out the flow control settings */
if (cflag & CRTSCTS) {
config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X_CTS_FLOW;
config->wFlags |= UMP_MASK_UART_FLAGS_RTS_FLOW;
- dbg("%s - RTS/CTS is enabled", __FUNCTION__);
+ dbg("%s - RTS/CTS is enabled", __func__);
} else {
- dbg("%s - RTS/CTS is disabled", __FUNCTION__);
+ dbg("%s - RTS/CTS is disabled", __func__);
tty->hw_stopped = 0;
restart_read(edge_port);
}
@@ -2469,18 +2469,18 @@
if (I_IXOFF(tty)) {
config->wFlags |= UMP_MASK_UART_FLAGS_IN_X;
dbg ("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
- __FUNCTION__, config->cXon, config->cXoff);
+ __func__, config->cXon, config->cXoff);
} else {
- dbg ("%s - INBOUND XON/XOFF is disabled", __FUNCTION__);
+ dbg ("%s - INBOUND XON/XOFF is disabled", __func__);
}
/* if we are implementing OUTBOUND XON/XOFF */
if (I_IXON(tty)) {
config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X;
dbg ("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
- __FUNCTION__, config->cXon, config->cXoff);
+ __func__, config->cXon, config->cXoff);
} else {
- dbg ("%s - OUTBOUND XON/XOFF is disabled", __FUNCTION__);
+ dbg ("%s - OUTBOUND XON/XOFF is disabled", __func__);
}
}
@@ -2499,7 +2499,7 @@
/* FIXME: Recompute actual baud from divisor here */
- dbg ("%s - baud rate = %d, wBaudRate = %d", __FUNCTION__, baud, config->wBaudRate);
+ dbg ("%s - baud rate = %d, wBaudRate = %d", __func__, baud, config->wBaudRate);
dbg ("wBaudRate: %d", (int)(461550L / config->wBaudRate));
dbg ("wFlags: 0x%x", config->wFlags);
@@ -2522,7 +2522,7 @@
sizeof(*config));
if (status) {
dbg ("%s - error %d when trying to write config to device",
- __FUNCTION__, status);
+ __func__, status);
}
kfree (config);
@@ -2538,12 +2538,12 @@
cflag = tty->termios->c_cflag;
- dbg("%s - clfag %08x iflag %08x", __FUNCTION__,
+ dbg("%s - clfag %08x iflag %08x", __func__,
tty->termios->c_cflag, tty->termios->c_iflag);
- dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__,
+ dbg("%s - old clfag %08x old iflag %08x", __func__,
old_termios->c_cflag, old_termios->c_iflag);
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return;
@@ -2560,7 +2560,7 @@
unsigned int mcr;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&edge_port->ep_lock, flags);
mcr = edge_port->shadow_mcr;
@@ -2594,7 +2594,7 @@
unsigned int mcr;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&edge_port->ep_lock, flags);
@@ -2608,7 +2608,7 @@
| ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */
- dbg("%s -- %x", __FUNCTION__, result);
+ dbg("%s -- %x", __func__, result);
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
return result;
@@ -2648,30 +2648,30 @@
struct async_icount cnow;
struct async_icount cprev;
- dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd);
+ dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
switch (cmd) {
case TIOCINQ:
- dbg("%s - (%d) TIOCINQ", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCINQ", __func__, port->number);
// return get_number_bytes_avail(edge_port, (unsigned int *) arg);
break;
case TIOCSERGETLSR:
- dbg("%s - (%d) TIOCSERGETLSR", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCSERGETLSR", __func__, port->number);
// return get_lsr_info(edge_port, (unsigned int *) arg);
break;
case TIOCGSERIAL:
- dbg("%s - (%d) TIOCGSERIAL", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCGSERIAL", __func__, port->number);
return get_serial_info(edge_port, (struct serial_struct __user *) arg);
break;
case TIOCSSERIAL:
- dbg("%s - (%d) TIOCSSERIAL", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCSSERIAL", __func__, port->number);
break;
case TIOCMIWAIT:
- dbg("%s - (%d) TIOCMIWAIT", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
cprev = edge_port->icount;
while (1) {
interruptible_sleep_on(&edge_port->delta_msr_wait);
@@ -2694,7 +2694,7 @@
break;
case TIOCGICOUNT:
- dbg ("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__,
+ dbg ("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
port->number, edge_port->icount.rx, edge_port->icount.tx);
if (copy_to_user((void __user *)arg, &edge_port->icount, sizeof(edge_port->icount)))
return -EFAULT;
@@ -2709,7 +2709,7 @@
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int status;
- dbg ("%s - state = %d", __FUNCTION__, break_state);
+ dbg ("%s - state = %d", __func__, break_state);
/* chase the port close */
TIChasePort (edge_port, 0, 0);
@@ -2721,7 +2721,7 @@
}
if (status) {
dbg ("%s - error %d sending break set/clear command.",
- __FUNCTION__, status);
+ __func__, status);
}
}
@@ -2738,7 +2738,7 @@
/* create our private serial structure */
edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
if (edge_serial == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__);
+ dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
return -ENOMEM;
}
mutex_init(&edge_serial->es_lock);
@@ -2755,13 +2755,13 @@
for (i = 0; i < serial->num_ports; ++i) {
edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL);
if (edge_port == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__);
+ dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
goto cleanup;
}
spin_lock_init(&edge_port->ep_lock);
edge_port->ep_out_buf = edge_buf_alloc(EDGE_OUT_BUF_SIZE);
if (edge_port->ep_out_buf == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__);
+ dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
kfree(edge_port);
goto cleanup;
}
@@ -2790,7 +2790,7 @@
int i;
struct edgeport_port *edge_port;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
for (i = 0; i < serial->num_ports; ++i) {
edge_port = usb_get_serial_port_data(serial->port[i]);
@@ -2822,12 +2822,12 @@
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned int v = simple_strtoul(valbuf, NULL, 0);
- dbg("%s: setting uart_mode = %d", __FUNCTION__, v);
+ dbg("%s: setting uart_mode = %d", __func__, v);
if (v < 256)
edge_port->bUartMode = v;
else
- dev_err(dev, "%s - uart_mode %d is invalid\n", __FUNCTION__, v);
+ dev_err(dev, "%s - uart_mode %d is invalid\n", __func__, v);
return count;
}