[SCSI] qla2xxx: Remove obsolete firmware-loader-module support.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 22e8714..ea8239d 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -54,13 +54,6 @@
MODULE_PARM_DESC(ql2xloginretrycount,
"Specify an alternate value for the NVRAM login retry count.");
-#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
-int ql2xfwloadflash;
-module_param(ql2xfwloadflash, int, S_IRUGO|S_IRUSR);
-MODULE_PARM_DESC(ql2xfwloadflash,
- "Load ISP24xx firmware image from FLASH (onboard memory).");
-#endif
-
static void qla2x00_free_device(scsi_qla_host_t *);
static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
@@ -1150,18 +1143,22 @@
case PCI_DEVICE_ID_QLOGIC_ISP2100:
ha->device_type |= DT_ISP2100;
ha->device_type &= ~DT_EXTENDED_IDS;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2100;
break;
case PCI_DEVICE_ID_QLOGIC_ISP2200:
ha->device_type |= DT_ISP2200;
ha->device_type &= ~DT_EXTENDED_IDS;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2100;
break;
case PCI_DEVICE_ID_QLOGIC_ISP2300:
ha->device_type |= DT_ISP2300;
ha->device_type |= DT_ZIO_SUPPORTED;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2300;
break;
case PCI_DEVICE_ID_QLOGIC_ISP2312:
ha->device_type |= DT_ISP2312;
ha->device_type |= DT_ZIO_SUPPORTED;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2300;
break;
case PCI_DEVICE_ID_QLOGIC_ISP2322:
ha->device_type |= DT_ISP2322;
@@ -1169,26 +1166,33 @@
if (ha->pdev->subsystem_vendor == 0x1028 &&
ha->pdev->subsystem_device == 0x0170)
ha->device_type |= DT_OEM_001;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2300;
break;
case PCI_DEVICE_ID_QLOGIC_ISP6312:
ha->device_type |= DT_ISP6312;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2300;
break;
case PCI_DEVICE_ID_QLOGIC_ISP6322:
ha->device_type |= DT_ISP6322;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2300;
break;
case PCI_DEVICE_ID_QLOGIC_ISP2422:
ha->device_type |= DT_ISP2422;
ha->device_type |= DT_ZIO_SUPPORTED;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
case PCI_DEVICE_ID_QLOGIC_ISP2432:
ha->device_type |= DT_ISP2432;
ha->device_type |= DT_ZIO_SUPPORTED;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
case PCI_DEVICE_ID_QLOGIC_ISP5422:
ha->device_type |= DT_ISP5422;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
case PCI_DEVICE_ID_QLOGIC_ISP5432:
ha->device_type |= DT_ISP5432;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
}
}
@@ -1235,7 +1239,7 @@
goto iospace_error_exit;
}
- if (pci_request_regions(ha->pdev, ha->brd_info->drv_name)) {
+ if (pci_request_regions(ha->pdev, "qla2xxx")) {
qla_printk(KERN_WARNING, ha,
"Failed to reserve PIO/MMIO regions (%s)\n",
pci_name(ha->pdev));
@@ -1317,7 +1321,7 @@
/*
* PCI driver interface
*/
-int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
+static int qla2x00_probe_one(struct pci_dev *pdev)
{
int ret = -ENODEV;
device_reg_t __iomem *reg;
@@ -1351,8 +1355,7 @@
ha->pdev = pdev;
ha->host = host;
ha->host_no = host->host_no;
- ha->brd_info = brd_info;
- sprintf(ha->host_str, "%s_%ld", ha->brd_info->drv_name, ha->host_no);
+ sprintf(ha->host_str, "qla2xxx_%ld", ha->host_no);
/* Set ISP-type information. */
qla2x00_set_isp_flags(ha);
@@ -1449,10 +1452,6 @@
ha->isp_ops.nvram_config = qla24xx_nvram_config;
ha->isp_ops.update_fw_options = qla24xx_update_fw_options;
ha->isp_ops.load_risc = qla24xx_load_risc;
-#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
- if (ql2xfwloadflash)
- ha->isp_ops.load_risc = qla24xx_load_risc_flash;
-#endif
ha->isp_ops.pci_info_str = qla24xx_pci_info_str;
ha->isp_ops.fw_version_str = qla24xx_fw_version_str;
ha->isp_ops.intr_handler = qla24xx_intr_handler;
@@ -1539,7 +1538,7 @@
host->transportt = qla2xxx_transport_template;
ret = request_irq(pdev->irq, ha->isp_ops.intr_handler,
- SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha);
+ SA_INTERRUPT|SA_SHIRQ, "qla2xxx", ha);
if (ret) {
qla_printk(KERN_WARNING, ha,
"Failed to reserve interrupt %d already in use.\n",
@@ -1637,9 +1636,8 @@
probe_out:
return ret;
}
-EXPORT_SYMBOL_GPL(qla2x00_probe_one);
-void qla2x00_remove_one(struct pci_dev *pdev)
+static void qla2x00_remove_one(struct pci_dev *pdev)
{
scsi_qla_host_t *ha;
@@ -1657,7 +1655,6 @@
pci_set_drvdata(pdev, NULL);
}
-EXPORT_SYMBOL_GPL(qla2x00_remove_one);
static void
qla2x00_free_device(scsi_qla_host_t *ha)
@@ -2539,14 +2536,6 @@
return -ETIMEDOUT;
}
-#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
-
-#define qla2x00_release_firmware() do { } while (0)
-#define qla2x00_pci_module_init() (0)
-#define qla2x00_pci_module_exit() do { } while (0)
-
-#else /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */
-
/* Firmware interface routines. */
#define FW_BLOBS 5
@@ -2613,10 +2602,6 @@
up(&qla_fw_lock);
}
-static struct qla_board_info qla_board_tbl = {
- .drv_name = "qla2xxx",
-};
-
static struct pci_device_id qla2xxx_pci_tbl[] = {
{ PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100,
PCI_ANY_ID, PCI_ANY_ID, },
@@ -2647,7 +2632,7 @@
static int __devinit
qla2xxx_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
- return qla2x00_probe_one(pdev, &qla_board_tbl);
+ return qla2x00_probe_one(pdev);
}
static void __devexit
@@ -2678,8 +2663,6 @@
pci_unregister_driver(&qla2xxx_pci_driver);
}
-#endif
-
/**
* qla2x00_module_init - Module initialization.
**/
@@ -2699,9 +2682,6 @@
/* Derive version string. */
strcpy(qla2x00_version_str, QLA2XXX_VERSION);
-#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
- strcat(qla2x00_version_str, "-fw");
-#endif
#if DEBUG_QLA2100
strcat(qla2x00_version_str, "-debug");
#endif