| /*arch/ppc/platforms/mpc885ads-setup.c |
| * |
| * Platform setup for the Freescale mpc885ads board |
| * |
| * Vitaly Bordug <vbordug@ru.mvista.com> |
| * |
| * Copyright 2005 MontaVista Software Inc. |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/param.h> |
| #include <linux/string.h> |
| #include <linux/ioport.h> |
| #include <linux/device.h> |
| |
| #include <linux/fs_enet_pd.h> |
| #include <linux/fs_uart_pd.h> |
| #include <linux/mii.h> |
| |
| #include <asm/delay.h> |
| #include <asm/io.h> |
| #include <asm/machdep.h> |
| #include <asm/page.h> |
| #include <asm/processor.h> |
| #include <asm/system.h> |
| #include <asm/time.h> |
| #include <asm/ppcboot.h> |
| #include <asm/8xx_immap.h> |
| #include <asm/commproc.h> |
| #include <asm/ppc_sys.h> |
| #include <asm/mpc8xx.h> |
| |
| extern unsigned char __res[]; |
| |
| static void setup_fec1_ioports(void); |
| static void setup_scc1_ioports(void); |
| static void setup_smc1_ioports(void); |
| static void setup_smc2_ioports(void); |
| |
| static struct fs_mii_bus_info fec_mii_bus_info = { |
| .method = fsmii_fec, |
| .id = 0, |
| }; |
| |
| static struct fs_mii_bus_info scc_mii_bus_info = { |
| .method = fsmii_fixed, |
| .id = 0, |
| .i.fixed.speed = 10, |
| .i.fixed.duplex = 0, |
| }; |
| |
| static struct fs_platform_info mpc8xx_fec_pdata[] = { |
| { |
| .rx_ring = 128, |
| .tx_ring = 16, |
| .rx_copybreak = 240, |
| |
| .use_napi = 1, |
| .napi_weight = 17, |
| |
| .phy_addr = 15, |
| .phy_irq = -1, |
| |
| .use_rmii = 0, |
| |
| .bus_info = &fec_mii_bus_info, |
| } |
| }; |
| |
| static struct fs_platform_info mpc8xx_scc_pdata = { |
| .rx_ring = 64, |
| .tx_ring = 8, |
| .rx_copybreak = 240, |
| |
| .use_napi = 1, |
| .napi_weight = 17, |
| |
| .phy_addr = -1, |
| .phy_irq = -1, |
| |
| .bus_info = &scc_mii_bus_info, |
| |
| }; |
| |
| static struct fs_uart_platform_info mpc866_uart_pdata[] = { |
| [fsid_smc1_uart] = { |
| .brg = 1, |
| .fs_no = fsid_smc1_uart, |
| .init_ioports = setup_smc1_ioports, |
| .tx_num_fifo = 4, |
| .tx_buf_size = 32, |
| .rx_num_fifo = 4, |
| .rx_buf_size = 32, |
| }, |
| [fsid_smc2_uart] = { |
| .brg = 2, |
| .fs_no = fsid_smc2_uart, |
| .init_ioports = setup_smc2_ioports, |
| .tx_num_fifo = 4, |
| .tx_buf_size = 32, |
| .rx_num_fifo = 4, |
| .rx_buf_size = 32, |
| }, |
| }; |
| |
| void __init board_init(void) |
| { |
| volatile cpm8xx_t *cp = cpmp; |
| unsigned *bcsr_io; |
| |
| bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); |
| |
| if (bcsr_io == NULL) { |
| printk(KERN_CRIT "Could not remap BCSR1\n"); |
| return; |
| } |
| |
| #ifdef CONFIG_SERIAL_CPM_SMC1 |
| cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */ |
| clrbits32(bcsr_io,(0x80000000 >> 7)); |
| cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX); |
| cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); |
| #else |
| setbits32(bcsr_io,(0x80000000 >> 7)); |
| |
| cp->cp_pbpar &= ~(0x000000c0); |
| cp->cp_pbdir |= 0x000000c0; |
| cp->cp_smc[0].smc_smcmr = 0; |
| cp->cp_smc[0].smc_smce = 0; |
| #endif |
| |
| #ifdef CONFIG_SERIAL_CPM_SMC2 |
| cp->cp_simode &= ~(0xe0000000 >> 1); |
| cp->cp_simode |= (0x20000000 >> 1); /* brg2 */ |
| clrbits32(bcsr_io,(0x80000000 >> 13)); |
| cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX); |
| cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); |
| #else |
| clrbits32(bcsr_io,(0x80000000 >> 13)); |
| cp->cp_pbpar &= ~(0x00000c00); |
| cp->cp_pbdir |= 0x00000c00; |
| cp->cp_smc[1].smc_smcmr = 0; |
| cp->cp_smc[1].smc_smce = 0; |
| #endif |
| iounmap(bcsr_io); |
| } |
| |
| static void setup_fec1_ioports(void) |
| { |
| immap_t *immap = (immap_t *) IMAP_ADDR; |
| |
| setbits16(&immap->im_ioport.iop_pdpar, 0x1fff); |
| setbits16(&immap->im_ioport.iop_pddir, 0x1fff); |
| } |
| |
| static void setup_scc1_ioports(void) |
| { |
| immap_t *immap = (immap_t *) IMAP_ADDR; |
| unsigned *bcsr_io; |
| |
| bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); |
| |
| if (bcsr_io == NULL) { |
| printk(KERN_CRIT "Could not remap BCSR1\n"); |
| return; |
| } |
| |
| /* Enable the PHY. |
| */ |
| clrbits32(bcsr_io,BCSR1_ETHEN); |
| |
| /* Configure port A pins for Txd and Rxd. |
| */ |
| /* Disable receive and transmit in case EPPC-Bug started it. |
| */ |
| setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD); |
| clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD); |
| clrbits16(&immap->im_ioport.iop_paodr, PA_ENET_TXD); |
| |
| /* Configure port C pins to enable CLSN and RENA. |
| */ |
| clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA); |
| clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA); |
| setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA); |
| /* Configure port A for TCLK and RCLK. |
| */ |
| setbits16(&immap->im_ioport.iop_papar, PA_ENET_TCLK | PA_ENET_RCLK); |
| clrbits16(&immap->im_ioport.iop_padir, PA_ENET_TCLK | PA_ENET_RCLK); |
| clrbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA); |
| clrbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA); |
| |
| /* Configure Serial Interface clock routing. |
| * First, clear all SCC bits to zero, then set the ones we want. |
| */ |
| clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK); |
| setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT); |
| |
| /* In the original SCC enet driver the following code is placed at |
| the end of the initialization */ |
| setbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA); |
| setbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA); |
| |
| } |
| |
| static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) |
| { |
| struct fs_platform_info *fpi = pdev->dev.platform_data; |
| |
| volatile cpm8xx_t *cp; |
| bd_t *bd = (bd_t *) __res; |
| char *e; |
| int i; |
| |
| /* Get pointer to Communication Processor */ |
| cp = cpmp; |
| switch (fs_no) { |
| case fsid_fec1: |
| fpi = &mpc8xx_fec_pdata[0]; |
| fpi->init_ioports = &setup_fec1_ioports; |
| |
| break; |
| case fsid_scc1: |
| fpi = &mpc8xx_scc_pdata; |
| fpi->init_ioports = &setup_scc1_ioports; |
| |
| break; |
| default: |
| printk(KERN_WARNING"Device %s is not supported!\n", pdev->name); |
| return; |
| } |
| |
| pdev->dev.platform_data = fpi; |
| fpi->fs_no = fs_no; |
| |
| e = (unsigned char *)&bd->bi_enetaddr; |
| for (i = 0; i < 6; i++) |
| fpi->macaddr[i] = *e++; |
| |
| fpi->macaddr[5 - pdev->id]++; |
| |
| } |
| |
| static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev, |
| int idx) |
| { |
| /* This is for FEC devices only */ |
| if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec"))) |
| return; |
| mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1); |
| } |
| |
| static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev, |
| int idx) |
| { |
| /* This is for SCC devices only */ |
| if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc"))) |
| return; |
| |
| mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); |
| } |
| |
| static void setup_smc1_ioports(void) |
| { |
| immap_t *immap = (immap_t *) IMAP_ADDR; |
| unsigned *bcsr_io; |
| unsigned int iobits = 0x000000c0; |
| |
| bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); |
| |
| if (bcsr_io == NULL) { |
| printk(KERN_CRIT "Could not remap BCSR1\n"); |
| return; |
| } |
| |
| clrbits32(bcsr_io,BCSR1_RS232EN_1); |
| iounmap(bcsr_io); |
| |
| setbits32(&immap->im_cpm.cp_pbpar, iobits); |
| clrbits32(&immap->im_cpm.cp_pbdir, iobits); |
| clrbits16(&immap->im_cpm.cp_pbodr, iobits); |
| |
| } |
| |
| static void setup_smc2_ioports(void) |
| { |
| immap_t *immap = (immap_t *) IMAP_ADDR; |
| unsigned *bcsr_io; |
| unsigned int iobits = 0x00000c00; |
| |
| bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); |
| |
| if (bcsr_io == NULL) { |
| printk(KERN_CRIT "Could not remap BCSR1\n"); |
| return; |
| } |
| |
| clrbits32(bcsr_io,BCSR1_RS232EN_2); |
| |
| iounmap(bcsr_io); |
| |
| #ifndef CONFIG_SERIAL_CPM_ALT_SMC2 |
| setbits32(&immap->im_cpm.cp_pbpar, iobits); |
| clrbits32(&immap->im_cpm.cp_pbdir, iobits); |
| clrbits16(&immap->im_cpm.cp_pbodr, iobits); |
| #else |
| setbits16(&immap->im_ioport.iop_papar, iobits); |
| clrbits16(&immap->im_ioport.iop_padir, iobits); |
| clrbits16(&immap->im_ioport.iop_paodr, iobits); |
| #endif |
| |
| } |
| |
| static void __init mpc866ads_fixup_uart_pdata(struct platform_device *pdev, |
| int idx) |
| { |
| bd_t *bd = (bd_t *) __res; |
| struct fs_uart_platform_info *pinfo; |
| int num = ARRAY_SIZE(mpc866_uart_pdata); |
| |
| int id = fs_uart_id_smc2fsid(idx); |
| |
| /* no need to alter anything if console */ |
| if ((id <= num) && (!pdev->dev.platform_data)) { |
| pinfo = &mpc866_uart_pdata[id]; |
| pinfo->uart_clk = bd->bi_intfreq; |
| pdev->dev.platform_data = pinfo; |
| } |
| } |
| |
| static int mpc866ads_platform_notify(struct device *dev) |
| { |
| static const struct platform_notify_dev_map dev_map[] = { |
| { |
| .bus_id = "fsl-cpm-fec", |
| .rtn = mpc866ads_fixup_fec_enet_pdata, |
| }, |
| { |
| .bus_id = "fsl-cpm-scc", |
| .rtn = mpc866ads_fixup_scc_enet_pdata, |
| }, |
| { |
| .bus_id = "fsl-cpm-smc:uart", |
| .rtn = mpc866ads_fixup_uart_pdata |
| }, |
| { |
| .bus_id = NULL |
| } |
| }; |
| |
| platform_notify_map(dev_map,dev); |
| |
| return 0; |
| } |
| |
| int __init mpc866ads_init(void) |
| { |
| printk(KERN_NOTICE "mpc866ads: Init\n"); |
| |
| platform_notify = mpc866ads_platform_notify; |
| |
| ppc_sys_device_initfunc(); |
| ppc_sys_device_disable_all(); |
| |
| #ifdef MPC8xx_SECOND_ETH_SCC1 |
| ppc_sys_device_enable(MPC8xx_CPM_SCC1); |
| #endif |
| ppc_sys_device_enable(MPC8xx_CPM_FEC1); |
| |
| /* Since either of the uarts could be used as console, they need to ready */ |
| #ifdef CONFIG_SERIAL_CPM_SMC1 |
| ppc_sys_device_enable(MPC8xx_CPM_SMC1); |
| ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART); |
| #endif |
| |
| #ifdef CONFIG_SERIAL_CPM_SMCer |
| ppc_sys_device_enable(MPC8xx_CPM_SMC2); |
| ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART); |
| #endif |
| |
| return 0; |
| } |
| |
| /* |
| To prevent confusion, console selection is gross: |
| by 0 assumed SMC1 and by 1 assumed SMC2 |
| */ |
| struct platform_device* early_uart_get_pdev(int index) |
| { |
| bd_t *bd = (bd_t *) __res; |
| struct fs_uart_platform_info *pinfo; |
| |
| struct platform_device* pdev = NULL; |
| if(index) { /*assume SMC2 here*/ |
| pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2]; |
| pinfo = &mpc866_uart_pdata[1]; |
| } else { /*over SMC1*/ |
| pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1]; |
| pinfo = &mpc866_uart_pdata[0]; |
| } |
| |
| pinfo->uart_clk = bd->bi_intfreq; |
| pdev->dev.platform_data = pinfo; |
| ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR); |
| return NULL; |
| } |
| |
| arch_initcall(mpc866ads_init); |