clk: tegra: Fix PLLE SS coefficients
The PLLE SS coefficients are different between Tegra210 and Tegra114.
Add SoC generation specific versions for Tegra114 and Tegra210 and use
them in their respective ->enable() callbacks.
Signed-off-by: Mark Kuo <mkuo@nvidia.com>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index cb28130..6ac3f84 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -86,15 +86,21 @@
#define PLLE_SS_DISABLE (PLLE_SS_CNTL_BYPASS_SS | PLLE_SS_CNTL_INTERP_RESET |\
PLLE_SS_CNTL_SSC_BYP)
#define PLLE_SS_MAX_MASK 0x1ff
-#define PLLE_SS_MAX_VAL 0x25
+#define PLLE_SS_MAX_VAL_TEGRA114 0x25
+#define PLLE_SS_MAX_VAL_TEGRA210 0x21
#define PLLE_SS_INC_MASK (0xff << 16)
#define PLLE_SS_INC_VAL (0x1 << 16)
#define PLLE_SS_INCINTRV_MASK (0x3f << 24)
-#define PLLE_SS_INCINTRV_VAL (0x20 << 24)
+#define PLLE_SS_INCINTRV_VAL_TEGRA114 (0x20 << 24)
+#define PLLE_SS_INCINTRV_VAL_TEGRA210 (0x23 << 24)
#define PLLE_SS_COEFFICIENTS_MASK \
(PLLE_SS_MAX_MASK | PLLE_SS_INC_MASK | PLLE_SS_INCINTRV_MASK)
-#define PLLE_SS_COEFFICIENTS_VAL \
- (PLLE_SS_MAX_VAL | PLLE_SS_INC_VAL | PLLE_SS_INCINTRV_VAL)
+#define PLLE_SS_COEFFICIENTS_VAL_TEGRA114 \
+ (PLLE_SS_MAX_VAL_TEGRA114 | PLLE_SS_INC_VAL |\
+ PLLE_SS_INCINTRV_VAL_TEGRA114)
+#define PLLE_SS_COEFFICIENTS_VAL_TEGRA210 \
+ (PLLE_SS_MAX_VAL_TEGRA210 | PLLE_SS_INC_VAL |\
+ PLLE_SS_INCINTRV_VAL_TEGRA210)
#define PLLE_AUX_PLLP_SEL BIT(2)
#define PLLE_AUX_USE_LOCKDET BIT(3)
@@ -1428,7 +1434,7 @@
val = pll_readl(PLLE_SS_CTRL, pll);
val &= ~(PLLE_SS_CNTL_CENTER | PLLE_SS_CNTL_INVERT);
val &= ~PLLE_SS_COEFFICIENTS_MASK;
- val |= PLLE_SS_COEFFICIENTS_VAL;
+ val |= PLLE_SS_COEFFICIENTS_VAL_TEGRA114;
pll_writel(val, PLLE_SS_CTRL, pll);
val &= ~(PLLE_SS_CNTL_SSC_BYP | PLLE_SS_CNTL_BYPASS_SS);
pll_writel(val, PLLE_SS_CTRL, pll);
@@ -2065,7 +2071,7 @@
val = pll_readl(PLLE_SS_CTRL, pll);
val &= ~(PLLE_SS_CNTL_CENTER | PLLE_SS_CNTL_INVERT);
val &= ~PLLE_SS_COEFFICIENTS_MASK;
- val |= PLLE_SS_COEFFICIENTS_VAL;
+ val |= PLLE_SS_COEFFICIENTS_VAL_TEGRA210;
pll_writel(val, PLLE_SS_CTRL, pll);
val &= ~(PLLE_SS_CNTL_SSC_BYP | PLLE_SS_CNTL_BYPASS_SS);
pll_writel(val, PLLE_SS_CTRL, pll);