| /* |
| * MMU fault handling support. |
| * |
| * Copyright (C) 1998-2002 Hewlett-Packard Co |
| * David Mosberger-Tang <davidm@hpl.hp.com> |
| */ |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/smp_lock.h> |
| #include <linux/interrupt.h> |
| #include <linux/kprobes.h> |
| |
| #include <asm/pgtable.h> |
| #include <asm/processor.h> |
| #include <asm/system.h> |
| #include <asm/uaccess.h> |
| #include <asm/kdebug.h> |
| |
| extern void die (char *, struct pt_regs *, long); |
| |
| /* |
| * Return TRUE if ADDRESS points at a page in the kernel's mapped segment |
| * (inside region 5, on ia64) and that page is present. |
| */ |
| static int |
| mapped_kernel_page_is_present (unsigned long address) |
| { |
| pgd_t *pgd; |
| pud_t *pud; |
| pmd_t *pmd; |
| pte_t *ptep, pte; |
| |
| pgd = pgd_offset_k(address); |
| if (pgd_none(*pgd) || pgd_bad(*pgd)) |
| return 0; |
| |
| pud = pud_offset(pgd, address); |
| if (pud_none(*pud) || pud_bad(*pud)) |
| return 0; |
| |
| pmd = pmd_offset(pud, address); |
| if (pmd_none(*pmd) || pmd_bad(*pmd)) |
| return 0; |
| |
| ptep = pte_offset_kernel(pmd, address); |
| if (!ptep) |
| return 0; |
| |
| pte = *ptep; |
| return pte_present(pte); |
| } |
| |
| void __kprobes |
| ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *regs) |
| { |
| int signal = SIGSEGV, code = SEGV_MAPERR; |
| struct vm_area_struct *vma, *prev_vma; |
| struct mm_struct *mm = current->mm; |
| struct siginfo si; |
| unsigned long mask; |
| |
| /* |
| * If we're in an interrupt or have no user context, we must not take the fault.. |
| */ |
| if (in_atomic() || !mm) |
| goto no_context; |
| |
| #ifdef CONFIG_VIRTUAL_MEM_MAP |
| /* |
| * If fault is in region 5 and we are in the kernel, we may already |
| * have the mmap_sem (pfn_valid macro is called during mmap). There |
| * is no vma for region 5 addr's anyway, so skip getting the semaphore |
| * and go directly to the exception handling code. |
| */ |
| |
| if ((REGION_NUMBER(address) == 5) && !user_mode(regs)) |
| goto bad_area_no_up; |
| #endif |
| |
| /* |
| * This is to handle the kprobes on user space access instructions |
| */ |
| if (notify_die(DIE_PAGE_FAULT, "page fault", regs, code, TRAP_BRKPT, |
| SIGSEGV) == NOTIFY_STOP) |
| return; |
| |
| down_read(&mm->mmap_sem); |
| |
| vma = find_vma_prev(mm, address, &prev_vma); |
| if (!vma) |
| goto bad_area; |
| |
| /* find_vma_prev() returns vma such that address < vma->vm_end or NULL */ |
| if (address < vma->vm_start) |
| goto check_expansion; |
| |
| good_area: |
| code = SEGV_ACCERR; |
| |
| /* OK, we've got a good vm_area for this memory area. Check the access permissions: */ |
| |
| # define VM_READ_BIT 0 |
| # define VM_WRITE_BIT 1 |
| # define VM_EXEC_BIT 2 |
| |
| # if (((1 << VM_READ_BIT) != VM_READ || (1 << VM_WRITE_BIT) != VM_WRITE) \ |
| || (1 << VM_EXEC_BIT) != VM_EXEC) |
| # error File is out of sync with <linux/mm.h>. Please update. |
| # endif |
| |
| mask = ( (((isr >> IA64_ISR_X_BIT) & 1UL) << VM_EXEC_BIT) |
| | (((isr >> IA64_ISR_W_BIT) & 1UL) << VM_WRITE_BIT) |
| | (((isr >> IA64_ISR_R_BIT) & 1UL) << VM_READ_BIT)); |
| |
| if ((vma->vm_flags & mask) != mask) |
| goto bad_area; |
| |
| survive: |
| /* |
| * If for any reason at all we couldn't handle the fault, make |
| * sure we exit gracefully rather than endlessly redo the |
| * fault. |
| */ |
| switch (handle_mm_fault(mm, vma, address, (mask & VM_WRITE) != 0)) { |
| case VM_FAULT_MINOR: |
| ++current->min_flt; |
| break; |
| case VM_FAULT_MAJOR: |
| ++current->maj_flt; |
| break; |
| case VM_FAULT_SIGBUS: |
| /* |
| * We ran out of memory, or some other thing happened |
| * to us that made us unable to handle the page fault |
| * gracefully. |
| */ |
| signal = SIGBUS; |
| goto bad_area; |
| case VM_FAULT_OOM: |
| goto out_of_memory; |
| default: |
| BUG(); |
| } |
| up_read(&mm->mmap_sem); |
| return; |
| |
| check_expansion: |
| if (!(prev_vma && (prev_vma->vm_flags & VM_GROWSUP) && (address == prev_vma->vm_end))) { |
| if (!(vma->vm_flags & VM_GROWSDOWN)) |
| goto bad_area; |
| if (REGION_NUMBER(address) != REGION_NUMBER(vma->vm_start) |
| || REGION_OFFSET(address) >= RGN_MAP_LIMIT) |
| goto bad_area; |
| if (expand_stack(vma, address)) |
| goto bad_area; |
| } else { |
| vma = prev_vma; |
| if (REGION_NUMBER(address) != REGION_NUMBER(vma->vm_start) |
| || REGION_OFFSET(address) >= RGN_MAP_LIMIT) |
| goto bad_area; |
| /* |
| * Since the register backing store is accessed sequentially, |
| * we disallow growing it by more than a page at a time. |
| */ |
| if (address > vma->vm_end + PAGE_SIZE - sizeof(long)) |
| goto bad_area; |
| if (expand_upwards(vma, address)) |
| goto bad_area; |
| } |
| goto good_area; |
| |
| bad_area: |
| up_read(&mm->mmap_sem); |
| #ifdef CONFIG_VIRTUAL_MEM_MAP |
| bad_area_no_up: |
| #endif |
| if ((isr & IA64_ISR_SP) |
| || ((isr & IA64_ISR_NA) && (isr & IA64_ISR_CODE_MASK) == IA64_ISR_CODE_LFETCH)) |
| { |
| /* |
| * This fault was due to a speculative load or lfetch.fault, set the "ed" |
| * bit in the psr to ensure forward progress. (Target register will get a |
| * NaT for ld.s, lfetch will be canceled.) |
| */ |
| ia64_psr(regs)->ed = 1; |
| return; |
| } |
| if (user_mode(regs)) { |
| si.si_signo = signal; |
| si.si_errno = 0; |
| si.si_code = code; |
| si.si_addr = (void __user *) address; |
| si.si_isr = isr; |
| si.si_flags = __ISR_VALID; |
| force_sig_info(signal, &si, current); |
| return; |
| } |
| |
| no_context: |
| if ((isr & IA64_ISR_SP) |
| || ((isr & IA64_ISR_NA) && (isr & IA64_ISR_CODE_MASK) == IA64_ISR_CODE_LFETCH)) |
| { |
| /* |
| * This fault was due to a speculative load or lfetch.fault, set the "ed" |
| * bit in the psr to ensure forward progress. (Target register will get a |
| * NaT for ld.s, lfetch will be canceled.) |
| */ |
| ia64_psr(regs)->ed = 1; |
| return; |
| } |
| |
| /* |
| * Since we have no vma's for region 5, we might get here even if the address is |
| * valid, due to the VHPT walker inserting a non present translation that becomes |
| * stale. If that happens, the non present fault handler already purged the stale |
| * translation, which fixed the problem. So, we check to see if the translation is |
| * valid, and return if it is. |
| */ |
| if (REGION_NUMBER(address) == 5 && mapped_kernel_page_is_present(address)) |
| return; |
| |
| if (ia64_done_with_exception(regs)) |
| return; |
| |
| /* |
| * Oops. The kernel tried to access some bad page. We'll have to terminate things |
| * with extreme prejudice. |
| */ |
| bust_spinlocks(1); |
| |
| if (address < PAGE_SIZE) |
| printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference (address %016lx)\n", address); |
| else |
| printk(KERN_ALERT "Unable to handle kernel paging request at " |
| "virtual address %016lx\n", address); |
| die("Oops", regs, isr); |
| bust_spinlocks(0); |
| do_exit(SIGKILL); |
| return; |
| |
| out_of_memory: |
| up_read(&mm->mmap_sem); |
| if (current->pid == 1) { |
| yield(); |
| down_read(&mm->mmap_sem); |
| goto survive; |
| } |
| printk(KERN_CRIT "VM: killing process %s\n", current->comm); |
| if (user_mode(regs)) |
| do_exit(SIGKILL); |
| goto no_context; |
| } |