iio:pressure:bmp280: cleanup
The calculations for temperature and pressure compensation were already slightly
optimized in comparison to the datasheet. So, it makes sense to optimize even a
bit more, making proper use of C operators:
- variable t in bmp280_compensate_temp() can be eliminated by directly
returning the result of the relevant equation.
- make use of the += operator and eliminate an unnecessary parenthesis level in
bmp280_compensate_press().
When the initialization of the ctrl_meas register fails, the error message will
now mention the right register name.
During probe, i2c_set_clientdata() is called, although it is not necessary. Drop
it.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Reviewed-by: Vlad Dogaru <vlad.dogaru@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c
index 47dfd34..7c623e2 100644
--- a/drivers/iio/pressure/bmp280.c
+++ b/drivers/iio/pressure/bmp280.c
@@ -148,7 +148,7 @@
s32 adc_temp)
{
int ret;
- s32 var1, var2, t;
+ s32 var1, var2;
__le16 buf[BMP280_COMP_TEMP_REG_COUNT / 2];
ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_TEMP_START,
@@ -173,10 +173,7 @@
((adc_temp >> 4) - ((s32)le16_to_cpu(buf[T1])))) >> 12) *
((s32)(s16)le16_to_cpu(buf[T3]))) >> 14;
- data->t_fine = var1 + var2;
- t = (data->t_fine * 5 + 128) >> 8;
-
- return t;
+ return (data->t_fine * 5 + 128) >> 8;
}
/*
@@ -203,8 +200,8 @@
var1 = ((s64)data->t_fine) - 128000;
var2 = var1 * var1 * (s64)(s16)le16_to_cpu(buf[P6]);
- var2 = var2 + ((var1 * (s64)(s16)le16_to_cpu(buf[P5])) << 17);
- var2 = var2 + (((s64)(s16)le16_to_cpu(buf[P4])) << 35);
+ var2 += (var1 * (s64)(s16)le16_to_cpu(buf[P5])) << 17;
+ var2 += ((s64)(s16)le16_to_cpu(buf[P4])) << 35;
var1 = ((var1 * var1 * (s64)(s16)le16_to_cpu(buf[P3])) >> 8) +
((var1 * (s64)(s16)le16_to_cpu(buf[P2])) << 12);
var1 = ((((s64)1) << 47) + var1) * ((s64)le16_to_cpu(buf[P1])) >> 33;
@@ -218,7 +215,7 @@
var2 = (((s64)(s16)le16_to_cpu(buf[P8])) * p) >> 19;
p = ((p + var1 + var2) >> 8) + (((s64)(s16)le16_to_cpu(buf[P7])) << 4);
- return (u32) p;
+ return (u32)p;
}
static int bmp280_read_temp(struct bmp280_data *data,
@@ -330,7 +327,7 @@
BMP280_MODE_NORMAL);
if (ret < 0) {
dev_err(&data->client->dev,
- "failed to write config register\n");
+ "failed to write ctrl_meas register\n");
return ret;
}
@@ -358,7 +355,6 @@
if (!indio_dev)
return -ENOMEM;
- i2c_set_clientdata(client, indio_dev);
data = iio_priv(indio_dev);
mutex_init(&data->lock);
data->client = client;