fs/jfs/jfs_logmgr.h - kernel/msm-4.9 - Gitiles

 /*
  *   Copyright (C) International Business Machines Corp., 2000-2004
  *   Portions Copyright (C) Christoph Hellwig, 2001-2002
  *
  *   This program is free software;  you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
  *   the Free Software Foundation; either version 2 of the License, or
  *   (at your option) any later version.
  *
  *   This program is distributed in the hope that it will be useful,
  *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
  *   the GNU General Public License for more details.
  *
  *   You should have received a copy of the GNU General Public License
  *   along with this program;  if not, write to the Free Software
  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
 #ifndef	_H_JFS_LOGMGR
 #define _H_JFS_LOGMGR

 #include "jfs_filsys.h"
 #include "jfs_lock.h"

 /*
  *	log manager configuration parameters
  */

 /* log page size */
 #define	LOGPSIZE	4096
 #define	L2LOGPSIZE	12

 #define LOGPAGES	16	/* Log pages per mounted file system */

 /*
  *	log logical volume
  *
  * a log is used to make the commit operation on journalled
  * files within the same logical volume group atomic.
  * a log is implemented with a logical volume.
  * there is one log per logical volume group.
  *
  * block 0 of the log logical volume is not used (ipl etc).
  * block 1 contains a log "superblock" and is used by logFormat(),
  * lmLogInit(), lmLogShutdown(), and logRedo() to record status
  * of the log but is not otherwise used during normal processing.
  * blocks 2 - (N-1) are used to contain log records.
  *
  * when a volume group is varied-on-line, logRedo() must have
  * been executed before the file systems (logical volumes) in
  * the volume group can be mounted.
  */
 /*
  *	log superblock (block 1 of logical volume)
  */
 #define	LOGSUPER_B	1
 #define	LOGSTART_B	2

 #define	LOGMAGIC	0x87654321
 #define	LOGVERSION	1

 #define MAX_ACTIVE	128	/* Max active file systems sharing log */

 struct logsuper {
 	__le32 magic;		/* 4: log lv identifier */
 	__le32 version;		/* 4: version number */
 	__le32 serial;		/* 4: log open/mount counter */
 	__le32 size;		/* 4: size in number of LOGPSIZE blocks */
 	__le32 bsize;		/* 4: logical block size in byte */
 	__le32 l2bsize;		/* 4: log2 of bsize */

 	__le32 flag;		/* 4: option */
 	__le32 state;		/* 4: state - see below */

 	__le32 end;		/* 4: addr of last log record set by logredo */
 	char uuid[16];		/* 16: 128-bit journal uuid */
 	char label[16];		/* 16: journal label */
 	struct {
 		char uuid[16];
 	} active[MAX_ACTIVE];	/* 2048: active file systems list */
 };

 #define NULL_UUID "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"

 /* log flag: commit option (see jfs_filsys.h) */

 /* log state */
 #define	LOGMOUNT	0	/* log mounted by lmLogInit() */
 #define LOGREDONE	1	/* log shutdown by lmLogShutdown().
 				 * log redo completed by logredo().
 				 */
 #define LOGWRAP		2	/* log wrapped */
 #define LOGREADERR	3	/* log read error detected in logredo() */


 /*
  *	log logical page
  *
  * (this comment should be rewritten !)
  * the header and trailer structures (h,t) will normally have
  * the same page and eor value.
  * An exception to this occurs when a complete page write is not
  * accomplished on a power failure. Since the hardware may "split write"
  * sectors in the page, any out of order sequence may occur during powerfail
  * and needs to be recognized during log replay.  The xor value is
  * an "exclusive or" of all log words in the page up to eor.  This
  * 32 bit eor is stored with the top 16 bits in the header and the
  * bottom 16 bits in the trailer.  logredo can easily recognize pages
  * that were not completed by reconstructing this eor and checking
  * the log page.
  *
  * Previous versions of the operating system did not allow split
  * writes and detected partially written records in logredo by
  * ordering the updates to the header, trailer, and the move of data
  * into the logdata area.  The order: (1) data is moved (2) header
  * is updated (3) trailer is updated.  In logredo, when the header
  * differed from the trailer, the header and trailer were reconciled
  * as follows: if h.page != t.page they were set to the smaller of
  * the two and h.eor and t.eor set to 8 (i.e. empty page). if (only)
  * h.eor != t.eor they were set to the smaller of their two values.
  */
 struct logpage {
 	struct {		/* header */
 		__le32 page;	/* 4: log sequence page number */
 		__le16 rsrvd;	/* 2: */
 		__le16 eor;	/* 2: end-of-log offset of lasrt record write */
 	} h;

 	__le32 data[LOGPSIZE / 4 - 4];	/* log record area */

 	struct {		/* trailer */
 		__le32 page;	/* 4: normally the same as h.page */
 		__le16 rsrvd;	/* 2: */
 		__le16 eor;	/* 2: normally the same as h.eor */
 	} t;
 };

 #define LOGPHDRSIZE	8	/* log page header size */
 #define LOGPTLRSIZE	8	/* log page trailer size */


 /*
  *	log record
  *
  * (this comment should be rewritten !)
  * jfs uses only "after" log records (only a single writer is allowed
  * in a page, pages are written to temporary paging space if
  * if they must be written to disk before commit, and i/o is
  * scheduled for modified pages to their home location after
  * the log records containing the after values and the commit
  * record is written to the log on disk, undo discards the copy
  * in main-memory.)
  *
  * a log record consists of a data area of variable length followed by
  * a descriptor of fixed size LOGRDSIZE bytes.
  * the data area is rounded up to an integral number of 4-bytes and
  * must be no longer than LOGPSIZE.
  * the descriptor is of size of multiple of 4-bytes and aligned on a
  * 4-byte boundary.
  * records are packed one after the other in the data area of log pages.
  * (sometimes a DUMMY record is inserted so that at least one record ends
  * on every page or the longest record is placed on at most two pages).
  * the field eor in page header/trailer points to the byte following
  * the last record on a page.
  */

 /* log record types */
 #define LOG_COMMIT		0x8000
 #define LOG_SYNCPT		0x4000
 #define LOG_MOUNT		0x2000
 #define LOG_REDOPAGE		0x0800
 #define LOG_NOREDOPAGE		0x0080
 #define LOG_NOREDOINOEXT	0x0040
 #define LOG_UPDATEMAP		0x0008
 #define LOG_NOREDOFILE		0x0001

 /* REDOPAGE/NOREDOPAGE log record data type */
 #define	LOG_INODE		0x0001
 #define	LOG_XTREE		0x0002
 #define	LOG_DTREE		0x0004
 #define	LOG_BTROOT		0x0010
 #define	LOG_EA			0x0020
 #define	LOG_ACL			0x0040
 #define	LOG_DATA		0x0080
 #define	LOG_NEW			0x0100
 #define	LOG_EXTEND		0x0200
 #define LOG_RELOCATE		0x0400
 #define LOG_DIR_XTREE		0x0800	/* Xtree is in directory inode */

 /* UPDATEMAP log record descriptor type */
 #define	LOG_ALLOCXADLIST	0x0080
 #define	LOG_ALLOCPXDLIST	0x0040
 #define	LOG_ALLOCXAD		0x0020
 #define	LOG_ALLOCPXD		0x0010
 #define	LOG_FREEXADLIST		0x0008
 #define	LOG_FREEPXDLIST		0x0004
 #define	LOG_FREEXAD		0x0002
 #define	LOG_FREEPXD		0x0001


 struct lrd {
 	/*
 	 * type independent area
 	 */
 	__le32 logtid;		/* 4: log transaction identifier */
 	__le32 backchain;	/* 4: ptr to prev record of same transaction */
 	__le16 type;		/* 2: record type */
 	__le16 length;		/* 2: length of data in record (in byte) */
 	__le32 aggregate;	/* 4: file system lv/aggregate */
 	/* (16) */

 	/*
 	 * type dependent area (20)
 	 */
 	union {

 		/*
 		 *	COMMIT: commit
 		 *
 		 * transaction commit: no type-dependent information;
 		 */

 		/*
 		 *	REDOPAGE: after-image
 		 *
 		 * apply after-image;
 		 *
 		 * N.B. REDOPAGE, NOREDOPAGE, and UPDATEMAP must be same format;
 		 */
 		struct {
 			__le32 fileset;	/* 4: fileset number */
 			__le32 inode;	/* 4: inode number */
 			__le16 type;	/* 2: REDOPAGE record type */
 			__le16 l2linesize;	/* 2: log2 of line size */
 			pxd_t pxd;	/* 8: on-disk page pxd */
 		} redopage;	/* (20) */

 		/*
 		 *	NOREDOPAGE: the page is freed
 		 *
 		 * do not apply after-image records which precede this record
 		 * in the log with the same page block number to this page.
 		 *
 		 * N.B. REDOPAGE, NOREDOPAGE, and UPDATEMAP must be same format;
 		 */
 		struct {
 			__le32 fileset;	/* 4: fileset number */
 			__le32 inode;	/* 4: inode number */
 			__le16 type;	/* 2: NOREDOPAGE record type */
 			__le16 rsrvd;	/* 2: reserved */
 			pxd_t pxd;	/* 8: on-disk page pxd */
 		} noredopage;	/* (20) */

 		/*
 		 *	UPDATEMAP: update block allocation map
 		 *
 		 * either in-line PXD,
 		 * or     out-of-line  XADLIST;
 		 *
 		 * N.B. REDOPAGE, NOREDOPAGE, and UPDATEMAP must be same format;
 		 */
 		struct {
 			__le32 fileset;	/* 4: fileset number */
 			__le32 inode;	/* 4: inode number */
 			__le16 type;	/* 2: UPDATEMAP record type */
 			__le16 nxd;	/* 2: number of extents */
 			pxd_t pxd;	/* 8: pxd */
 		} updatemap;	/* (20) */

 		/*
 		 *	NOREDOINOEXT: the inode extent is freed
 		 *
 		 * do not apply after-image records which precede this
 		 * record in the log with the any of the 4 page block
 		 * numbers in this inode extent.
 		 *
 		 * NOTE: The fileset and pxd fields MUST remain in
 		 *       the same fields in the REDOPAGE record format.
 		 *
 		 */
 		struct {
 			__le32 fileset;	/* 4: fileset number */
 			__le32 iagnum;	/* 4: IAG number     */
 			__le32 inoext_idx;	/* 4: inode extent index */
 			pxd_t pxd;	/* 8: on-disk page pxd */
 		} noredoinoext;	/* (20) */

 		/*
 		 *	SYNCPT: log sync point
 		 *
 		 * replay log up to syncpt address specified;
 		 */
 		struct {
 			__le32 sync;	/* 4: syncpt address (0 = here) */
 		} syncpt;

 		/*
 		 *	MOUNT: file system mount
 		 *
 		 * file system mount: no type-dependent information;
 		 */

 		/*
 		 *	? FREEXTENT: free specified extent(s)
 		 *
 		 * free specified extent(s) from block allocation map
 		 * N.B.: nextents should be length of data/sizeof(xad_t)
 		 */
 		struct {
 			__le32 type;	/* 4: FREEXTENT record type */
 			__le32 nextent;	/* 4: number of extents */

 			/* data: PXD or XAD list */
 		} freextent;

 		/*
 		 *	? NOREDOFILE: this file is freed
 		 *
 		 * do not apply records which precede this record in the log
 		 * with the same inode number.
 		 *
 		 * NOREDOFILE must be the first to be written at commit
 		 * (last to be read in logredo()) - it prevents
 		 * replay of preceding updates of all preceding generations
 		 * of the inumber esp. the on-disk inode itself.
 		 */
 		struct {
 			__le32 fileset;	/* 4: fileset number */
 			__le32 inode;	/* 4: inode number */
 		} noredofile;

 		/*
 		 *	? NEWPAGE:
 		 *
 		 * metadata type dependent
 		 */
 		struct {
 			__le32 fileset;	/* 4: fileset number */
 			__le32 inode;	/* 4: inode number */
 			__le32 type;	/* 4: NEWPAGE record type */
 			pxd_t pxd;	/* 8: on-disk page pxd */
 		} newpage;

 		/*
 		 *	? DUMMY: filler
 		 *
 		 * no type-dependent information
 		 */
 	} log;
 };					/* (36) */

 #define	LOGRDSIZE	(sizeof(struct lrd))

 /*
  *	line vector descriptor
  */
 struct lvd {
 	__le16 offset;
 	__le16 length;
 };


 /*
  *	log logical volume
  */
 struct jfs_log {

 	struct list_head sb_list;/*  This is used to sync metadata
 				 *    before writing syncpt.
 				 */
 	struct list_head journal_list; /* Global list */
 	struct block_device *bdev; /* 4: log lv pointer */
 	int serial;		/* 4: log mount serial number */

 	s64 base;		/* @8: log extent address (inline log ) */
 	int size;		/* 4: log size in log page (in page) */
 	int l2bsize;		/* 4: log2 of bsize */

 	unsigned long flag;	/* 4: flag */

 	struct lbuf *lbuf_free;	/* 4: free lbufs */
 	wait_queue_head_t free_wait;	/* 4: */

 	/* log write */
 	int logtid;		/* 4: log tid */
 	int page;		/* 4: page number of eol page */
 	int eor;		/* 4: eor of last record in eol page */
 	struct lbuf *bp;	/* 4: current log page buffer */

 	struct mutex loglock;	/* 4: log write serialization lock */

 	/* syncpt */
 	int nextsync;		/* 4: bytes to write before next syncpt */
 	int active;		/* 4: */
 	wait_queue_head_t syncwait;	/* 4: */

 	/* commit */
 	uint cflag;		/* 4: */
 	struct list_head cqueue; /* FIFO commit queue */
 	struct tblock *flush_tblk; /* tblk we're waiting on for flush */
 	int gcrtc;		/* 4: GC_READY transaction count */
 	struct tblock *gclrt;	/* 4: latest GC_READY transaction */
 	spinlock_t gclock;	/* 4: group commit lock */
 	int logsize;		/* 4: log data area size in byte */
 	int lsn;		/* 4: end-of-log */
 	int clsn;		/* 4: clsn */
 	int syncpt;		/* 4: addr of last syncpt record */
 	int sync;		/* 4: addr from last logsync() */
 	struct list_head synclist;	/* 8: logsynclist anchor */
 	spinlock_t synclock;	/* 4: synclist lock */
 	struct lbuf *wqueue;	/* 4: log pageout queue */
 	int count;		/* 4: count */
 	char uuid[16];		/* 16: 128-bit uuid of log device */

 	int no_integrity;	/* 3: flag to disable journaling to disk */
 };

 /*
  * Log flag
  */
 #define log_INLINELOG	1
 #define log_SYNCBARRIER	2
 #define log_QUIESCE	3
 #define log_FLUSH	4

 /*
  * group commit flag
  */
 /* jfs_log */
 #define logGC_PAGEOUT	0x00000001

 /* tblock/lbuf */
 #define tblkGC_QUEUE		0x0001
 #define tblkGC_READY		0x0002
 #define tblkGC_COMMIT		0x0004
 #define tblkGC_COMMITTED	0x0008
 #define tblkGC_EOP		0x0010
 #define tblkGC_FREE		0x0020
 #define tblkGC_LEADER		0x0040
 #define tblkGC_ERROR		0x0080
 #define tblkGC_LAZY		0x0100	// D230860
 #define tblkGC_UNLOCKED		0x0200	// D230860

 /*
  *		log cache buffer header
  */
 struct lbuf {
 	struct jfs_log *l_log;	/* 4: log associated with buffer */

 	/*
 	 * data buffer base area
 	 */
 	uint l_flag;		/* 4: pageout control flags */

 	struct lbuf *l_wqnext;	/* 4: write queue link */
 	struct lbuf *l_freelist;	/* 4: freelistlink */

 	int l_pn;		/* 4: log page number */
 	int l_eor;		/* 4: log record eor */
 	int l_ceor;		/* 4: committed log record eor */

 	s64 l_blkno;		/* 8: log page block number */
 	caddr_t l_ldata;	/* 4: data page */
 	struct page *l_page;	/* The page itself */
 	uint l_offset;		/* Offset of l_ldata within the page */

 	wait_queue_head_t l_ioevent;	/* 4: i/o done event */
 };

 /* Reuse l_freelist for redrive list */
 #define l_redrive_next l_freelist

 /*
  *	logsynclist block
  *
  * common logsyncblk prefix for jbuf_t and tblock
  */
 struct logsyncblk {
 	u16 xflag;		/* flags */
 	u16 flag;		/* only meaninful in tblock */
 	lid_t lid;		/* lock id */
 	s32 lsn;		/* log sequence number */
 	struct list_head synclist;	/* log sync list link */
 };

 /*
  *	logsynclist serialization (per log)
  */

 #define LOGSYNC_LOCK_INIT(log) spin_lock_init(&(log)->synclock)
 #define LOGSYNC_LOCK(log, flags) spin_lock_irqsave(&(log)->synclock, flags)
 #define LOGSYNC_UNLOCK(log, flags) \
 	spin_unlock_irqrestore(&(log)->synclock, flags)

 /* compute the difference in bytes of lsn from sync point */
 #define logdiff(diff, lsn, log)\
 {\
 	diff = (lsn) - (log)->syncpt;\
 	if (diff < 0)\
 		diff += (log)->logsize;\
 }

 extern int lmLogOpen(struct super_block *sb);
 extern int lmLogClose(struct super_block *sb);
 extern int lmLogShutdown(struct jfs_log * log);
 extern int lmLogInit(struct jfs_log * log);
 extern int lmLogFormat(struct jfs_log *log, s64 logAddress, int logSize);
 extern int lmGroupCommit(struct jfs_log *, struct tblock *);
 extern int jfsIOWait(void *);
 extern void jfs_flush_journal(struct jfs_log * log, int wait);
 extern void jfs_syncpt(struct jfs_log *log, int hard_sync);

 #endif				/* _H_JFS_LOGMGR */
	/*
	* Copyright (C) International Business Machines Corp., 2000-2004
	* Portions Copyright (C) Christoph Hellwig, 2001-2002
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
	* the GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*/
	#ifndef _H_JFS_LOGMGR
	#define _H_JFS_LOGMGR

	#include "jfs_filsys.h"
	#include "jfs_lock.h"

	/*
	* log manager configuration parameters
	*/

	/* log page size */
	#define LOGPSIZE 4096
	#define L2LOGPSIZE 12

	#define LOGPAGES 16 /* Log pages per mounted file system */

	/*
	* log logical volume
	*
	* a log is used to make the commit operation on journalled
	* files within the same logical volume group atomic.
	* a log is implemented with a logical volume.
	* there is one log per logical volume group.
	*
	* block 0 of the log logical volume is not used (ipl etc).
	* block 1 contains a log "superblock" and is used by logFormat(),
	* lmLogInit(), lmLogShutdown(), and logRedo() to record status
	* of the log but is not otherwise used during normal processing.
	* blocks 2 - (N-1) are used to contain log records.
	*
	* when a volume group is varied-on-line, logRedo() must have
	* been executed before the file systems (logical volumes) in
	* the volume group can be mounted.
	*/
	/*
	* log superblock (block 1 of logical volume)
	*/
	#define LOGSUPER_B 1
	#define LOGSTART_B 2

	#define LOGMAGIC 0x87654321
	#define LOGVERSION 1

	#define MAX_ACTIVE 128 /* Max active file systems sharing log */

	struct logsuper {
	__le32 magic; /* 4: log lv identifier */
	__le32 version; /* 4: version number */
	__le32 serial; /* 4: log open/mount counter */
	__le32 size; /* 4: size in number of LOGPSIZE blocks */
	__le32 bsize; /* 4: logical block size in byte */
	__le32 l2bsize; /* 4: log2 of bsize */

	__le32 flag; /* 4: option */
	__le32 state; /* 4: state - see below */

	__le32 end; /* 4: addr of last log record set by logredo */
	char uuid[16]; /* 16: 128-bit journal uuid */
	char label[16]; /* 16: journal label */
	struct {
	char uuid[16];
	} active[MAX_ACTIVE]; /* 2048: active file systems list */
	};

	#define NULL_UUID "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"

	/* log flag: commit option (see jfs_filsys.h) */

	/* log state */
	#define LOGMOUNT 0 /* log mounted by lmLogInit() */
	#define LOGREDONE 1 /* log shutdown by lmLogShutdown().
	* log redo completed by logredo().
	*/
	#define LOGWRAP 2 /* log wrapped */
	#define LOGREADERR 3 /* log read error detected in logredo() */


	/*
	* log logical page
	*
	* (this comment should be rewritten !)
	* the header and trailer structures (h,t) will normally have
	* the same page and eor value.
	* An exception to this occurs when a complete page write is not
	* accomplished on a power failure. Since the hardware may "split write"
	* sectors in the page, any out of order sequence may occur during powerfail
	* and needs to be recognized during log replay. The xor value is
	* an "exclusive or" of all log words in the page up to eor. This
	* 32 bit eor is stored with the top 16 bits in the header and the
	* bottom 16 bits in the trailer. logredo can easily recognize pages
	* that were not completed by reconstructing this eor and checking
	* the log page.
	*
	* Previous versions of the operating system did not allow split
	* writes and detected partially written records in logredo by
	* ordering the updates to the header, trailer, and the move of data
	* into the logdata area. The order: (1) data is moved (2) header
	* is updated (3) trailer is updated. In logredo, when the header
	* differed from the trailer, the header and trailer were reconciled
	* as follows: if h.page != t.page they were set to the smaller of
	* the two and h.eor and t.eor set to 8 (i.e. empty page). if (only)
	* h.eor != t.eor they were set to the smaller of their two values.
	*/
	struct logpage {
	struct { /* header */
	__le32 page; /* 4: log sequence page number */
	__le16 rsrvd; /* 2: */
	__le16 eor; /* 2: end-of-log offset of lasrt record write */
	} h;

	__le32 data[LOGPSIZE / 4 - 4]; /* log record area */

	struct { /* trailer */
	__le32 page; /* 4: normally the same as h.page */
	__le16 rsrvd; /* 2: */
	__le16 eor; /* 2: normally the same as h.eor */
	} t;
	};

	#define LOGPHDRSIZE 8 /* log page header size */
	#define LOGPTLRSIZE 8 /* log page trailer size */


	/*
	* log record
	*
	* (this comment should be rewritten !)
	* jfs uses only "after" log records (only a single writer is allowed
	* in a page, pages are written to temporary paging space if
	* if they must be written to disk before commit, and i/o is
	* scheduled for modified pages to their home location after
	* the log records containing the after values and the commit
	* record is written to the log on disk, undo discards the copy
	* in main-memory.)
	*
	* a log record consists of a data area of variable length followed by
	* a descriptor of fixed size LOGRDSIZE bytes.
	* the data area is rounded up to an integral number of 4-bytes and
	* must be no longer than LOGPSIZE.
	* the descriptor is of size of multiple of 4-bytes and aligned on a
	* 4-byte boundary.
	* records are packed one after the other in the data area of log pages.
	* (sometimes a DUMMY record is inserted so that at least one record ends
	* on every page or the longest record is placed on at most two pages).
	* the field eor in page header/trailer points to the byte following
	* the last record on a page.
	*/

	/* log record types */
	#define LOG_COMMIT 0x8000
	#define LOG_SYNCPT 0x4000
	#define LOG_MOUNT 0x2000
	#define LOG_REDOPAGE 0x0800
	#define LOG_NOREDOPAGE 0x0080
	#define LOG_NOREDOINOEXT 0x0040
	#define LOG_UPDATEMAP 0x0008
	#define LOG_NOREDOFILE 0x0001

	/* REDOPAGE/NOREDOPAGE log record data type */
	#define LOG_INODE 0x0001
	#define LOG_XTREE 0x0002
	#define LOG_DTREE 0x0004
	#define LOG_BTROOT 0x0010
	#define LOG_EA 0x0020
	#define LOG_ACL 0x0040
	#define LOG_DATA 0x0080
	#define LOG_NEW 0x0100
	#define LOG_EXTEND 0x0200
	#define LOG_RELOCATE 0x0400
	#define LOG_DIR_XTREE 0x0800 /* Xtree is in directory inode */

	/* UPDATEMAP log record descriptor type */
	#define LOG_ALLOCXADLIST 0x0080
	#define LOG_ALLOCPXDLIST 0x0040
	#define LOG_ALLOCXAD 0x0020
	#define LOG_ALLOCPXD 0x0010
	#define LOG_FREEXADLIST 0x0008
	#define LOG_FREEPXDLIST 0x0004
	#define LOG_FREEXAD 0x0002
	#define LOG_FREEPXD 0x0001


	struct lrd {
	/*
	* type independent area
	*/
	__le32 logtid; /* 4: log transaction identifier */
	__le32 backchain; /* 4: ptr to prev record of same transaction */
	__le16 type; /* 2: record type */
	__le16 length; /* 2: length of data in record (in byte) */
	__le32 aggregate; /* 4: file system lv/aggregate */
	/* (16) */

	/*
	* type dependent area (20)
	*/
	union {

	/*
	* COMMIT: commit
	*
	* transaction commit: no type-dependent information;
	*/

	/*
	* REDOPAGE: after-image
	*
	* apply after-image;
	*
	* N.B. REDOPAGE, NOREDOPAGE, and UPDATEMAP must be same format;
	*/
	struct {
	__le32 fileset; /* 4: fileset number */
	__le32 inode; /* 4: inode number */
	__le16 type; /* 2: REDOPAGE record type */
	__le16 l2linesize; /* 2: log2 of line size */
	pxd_t pxd; /* 8: on-disk page pxd */
	} redopage; /* (20) */

	/*
	* NOREDOPAGE: the page is freed
	*
	* do not apply after-image records which precede this record
	* in the log with the same page block number to this page.
	*
	* N.B. REDOPAGE, NOREDOPAGE, and UPDATEMAP must be same format;
	*/
	struct {
	__le32 fileset; /* 4: fileset number */
	__le32 inode; /* 4: inode number */
	__le16 type; /* 2: NOREDOPAGE record type */
	__le16 rsrvd; /* 2: reserved */
	pxd_t pxd; /* 8: on-disk page pxd */
	} noredopage; /* (20) */

	/*
	* UPDATEMAP: update block allocation map
	*
	* either in-line PXD,
	* or out-of-line XADLIST;
	*
	* N.B. REDOPAGE, NOREDOPAGE, and UPDATEMAP must be same format;
	*/
	struct {
	__le32 fileset; /* 4: fileset number */
	__le32 inode; /* 4: inode number */
	__le16 type; /* 2: UPDATEMAP record type */
	__le16 nxd; /* 2: number of extents */
	pxd_t pxd; /* 8: pxd */
	} updatemap; /* (20) */

	/*
	* NOREDOINOEXT: the inode extent is freed
	*
	* do not apply after-image records which precede this
	* record in the log with the any of the 4 page block
	* numbers in this inode extent.
	*
	* NOTE: The fileset and pxd fields MUST remain in
	* the same fields in the REDOPAGE record format.
	*
	*/
	struct {
	__le32 fileset; /* 4: fileset number */
	__le32 iagnum; /* 4: IAG number */
	__le32 inoext_idx; /* 4: inode extent index */
	pxd_t pxd; /* 8: on-disk page pxd */
	} noredoinoext; /* (20) */

	/*
	* SYNCPT: log sync point
	*
	* replay log up to syncpt address specified;
	*/
	struct {
	__le32 sync; /* 4: syncpt address (0 = here) */
	} syncpt;

	/*
	* MOUNT: file system mount
	*
	* file system mount: no type-dependent information;
	*/

	/*
	* ? FREEXTENT: free specified extent(s)
	*
	* free specified extent(s) from block allocation map
	* N.B.: nextents should be length of data/sizeof(xad_t)
	*/
	struct {
	__le32 type; /* 4: FREEXTENT record type */
	__le32 nextent; /* 4: number of extents */

	/* data: PXD or XAD list */
	} freextent;

	/*
	* ? NOREDOFILE: this file is freed
	*
	* do not apply records which precede this record in the log
	* with the same inode number.
	*
	* NOREDOFILE must be the first to be written at commit
	* (last to be read in logredo()) - it prevents
	* replay of preceding updates of all preceding generations
	* of the inumber esp. the on-disk inode itself.
	*/
	struct {
	__le32 fileset; /* 4: fileset number */
	__le32 inode; /* 4: inode number */
	} noredofile;

	/*
	* ? NEWPAGE:
	*
	* metadata type dependent
	*/
	struct {
	__le32 fileset; /* 4: fileset number */
	__le32 inode; /* 4: inode number */
	__le32 type; /* 4: NEWPAGE record type */
	pxd_t pxd; /* 8: on-disk page pxd */
	} newpage;

	/*
	* ? DUMMY: filler
	*
	* no type-dependent information
	*/
	} log;
	}; /* (36) */

	#define LOGRDSIZE (sizeof(struct lrd))

	/*
	* line vector descriptor
	*/
	struct lvd {
	__le16 offset;
	__le16 length;
	};


	/*
	* log logical volume
	*/
	struct jfs_log {

	struct list_head sb_list;/* This is used to sync metadata
	* before writing syncpt.
	*/
	struct list_head journal_list; /* Global list */
	struct block_device bdev; / 4: log lv pointer */
	int serial; /* 4: log mount serial number */

	s64 base; /* @8: log extent address (inline log ) */
	int size; /* 4: log size in log page (in page) */
	int l2bsize; /* 4: log2 of bsize */

	unsigned long flag; /* 4: flag */

	struct lbuf lbuf_free; / 4: free lbufs */
	wait_queue_head_t free_wait; /* 4: */

	/* log write */
	int logtid; /* 4: log tid */
	int page; /* 4: page number of eol page */
	int eor; /* 4: eor of last record in eol page */
	struct lbuf bp; / 4: current log page buffer */

	struct mutex loglock; /* 4: log write serialization lock */

	/* syncpt */
	int nextsync; /* 4: bytes to write before next syncpt */
	int active; /* 4: */
	wait_queue_head_t syncwait; /* 4: */

	/* commit */
	uint cflag; /* 4: */
	struct list_head cqueue; /* FIFO commit queue */
	struct tblock flush_tblk; / tblk we're waiting on for flush */
	int gcrtc; /* 4: GC_READY transaction count */
	struct tblock gclrt; / 4: latest GC_READY transaction */
	spinlock_t gclock; /* 4: group commit lock */
	int logsize; /* 4: log data area size in byte */
	int lsn; /* 4: end-of-log */
	int clsn; /* 4: clsn */
	int syncpt; /* 4: addr of last syncpt record */
	int sync; /* 4: addr from last logsync() */
	struct list_head synclist; /* 8: logsynclist anchor */
	spinlock_t synclock; /* 4: synclist lock */
	struct lbuf wqueue; / 4: log pageout queue */
	int count; /* 4: count */
	char uuid[16]; /* 16: 128-bit uuid of log device */

	int no_integrity; /* 3: flag to disable journaling to disk */
	};

	/*
	* Log flag
	*/
	#define log_INLINELOG 1
	#define log_SYNCBARRIER 2
	#define log_QUIESCE 3
	#define log_FLUSH 4

	/*
	* group commit flag
	*/
	/* jfs_log */
	#define logGC_PAGEOUT 0x00000001

	/* tblock/lbuf */
	#define tblkGC_QUEUE 0x0001
	#define tblkGC_READY 0x0002
	#define tblkGC_COMMIT 0x0004
	#define tblkGC_COMMITTED 0x0008
	#define tblkGC_EOP 0x0010
	#define tblkGC_FREE 0x0020
	#define tblkGC_LEADER 0x0040
	#define tblkGC_ERROR 0x0080
	#define tblkGC_LAZY 0x0100 // D230860
	#define tblkGC_UNLOCKED 0x0200 // D230860

	/*
	* log cache buffer header
	*/
	struct lbuf {
	struct jfs_log l_log; / 4: log associated with buffer */

	/*
	* data buffer base area
	*/
	uint l_flag; /* 4: pageout control flags */

	struct lbuf l_wqnext; / 4: write queue link */
	struct lbuf l_freelist; / 4: freelistlink */

	int l_pn; /* 4: log page number */
	int l_eor; /* 4: log record eor */
	int l_ceor; /* 4: committed log record eor */

	s64 l_blkno; /* 8: log page block number */
	caddr_t l_ldata; /* 4: data page */
	struct page l_page; / The page itself */
	uint l_offset; /* Offset of l_ldata within the page */

	wait_queue_head_t l_ioevent; /* 4: i/o done event */
	};

	/* Reuse l_freelist for redrive list */
	#define l_redrive_next l_freelist

	/*
	* logsynclist block
	*
	* common logsyncblk prefix for jbuf_t and tblock
	*/
	struct logsyncblk {
	u16 xflag; /* flags */
	u16 flag; /* only meaninful in tblock */
	lid_t lid; /* lock id */
	s32 lsn; /* log sequence number */
	struct list_head synclist; /* log sync list link */
	};

	/*
	* logsynclist serialization (per log)
	*/

	#define LOGSYNC_LOCK_INIT(log) spin_lock_init(&(log)->synclock)
	#define LOGSYNC_LOCK(log, flags) spin_lock_irqsave(&(log)->synclock, flags)
	#define LOGSYNC_UNLOCK(log, flags) \
	spin_unlock_irqrestore(&(log)->synclock, flags)

	/* compute the difference in bytes of lsn from sync point */
	#define logdiff(diff, lsn, log)\
	{\
	diff = (lsn) - (log)->syncpt;\
	if (diff < 0)\
	diff += (log)->logsize;\
	}

	extern int lmLogOpen(struct super_block *sb);
	extern int lmLogClose(struct super_block *sb);
	extern int lmLogShutdown(struct jfs_log * log);
	extern int lmLogInit(struct jfs_log * log);
	extern int lmLogFormat(struct jfs_log *log, s64 logAddress, int logSize);
	extern int lmGroupCommit(struct jfs_log , struct tblock );
	extern int jfsIOWait(void *);
	extern void jfs_flush_journal(struct jfs_log * log, int wait);
	extern void jfs_syncpt(struct jfs_log *log, int hard_sync);

	#endif /* _H_JFS_LOGMGR */