staging: media: Use dev_err() instead of pr_err()
Use dev_err() instead of pr_err() in go7007-usb.c.
Signed-off-by: Dulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/media/go7007/go7007-usb.c b/drivers/staging/media/go7007/go7007-usb.c
index 6f75683..f7e81517 100644
--- a/drivers/staging/media/go7007/go7007-usb.c
+++ b/drivers/staging/media/go7007/go7007-usb.c
@@ -677,7 +677,7 @@
/* Wait for an interrupt to indicate successful hardware reset */
if (go7007_read_interrupt(go, &intr_val, &intr_data) < 0 ||
(intr_val & ~0x1) != 0x55aa) {
- pr_err("unable to reset the USB interface\n");
+ dev_err(go->dev, "unable to reset the USB interface\n");
return -1;
}
return 0;
@@ -709,7 +709,7 @@
if (r < 0)
goto write_int_error;
if (i == 100) {
- pr_err("device is hung, status reg = 0x%04x\n", status_reg);
+ dev_err(go->dev, "device is hung, status reg = 0x%04x\n", status_reg);
return -1;
}
r = usb_control_msg(usb->usbdev, usb_sndctrlpipe(usb->usbdev, 0), 0x12,
@@ -725,7 +725,7 @@
return 0;
write_int_error:
- pr_err("error in WriteInterrupt: %d\n", r);
+ dev_err(go->dev, "error in WriteInterrupt: %d\n", r);
return r;
}
@@ -747,7 +747,7 @@
USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, 0x55aa,
0xf0f0, go->usb_buf, 8, timeout);
if (r < 0) {
- pr_err("error in WriteInterrupt: %d\n", r);
+ dev_err(go->dev, "error in WriteInterrupt: %d\n", r);
return r;
}
return 0;
@@ -762,13 +762,13 @@
if (status) {
if (status != -ESHUTDOWN &&
go->status != STATUS_SHUTDOWN) {
- pr_err("error in read interrupt: %d\n", urb->status);
+ dev_err(go->dev, "error in read interrupt: %d\n", urb->status);
} else {
wake_up(&go->interrupt_waitq);
return;
}
} else if (urb->actual_length != urb->transfer_buffer_length) {
- pr_err("short read in interrupt pipe!\n");
+ dev_err(go->dev, "short read in interrupt pipe!\n");
} else {
go->interrupt_available = 1;
go->interrupt_data = __le16_to_cpu(regs[0]);
@@ -787,7 +787,7 @@
r = usb_submit_urb(usb->intr_urb, GFP_KERNEL);
if (r < 0) {
- pr_err("unable to submit interrupt urb: %d\n", r);
+ dev_err(go->dev, "unable to submit interrupt urb: %d\n", r);
return r;
}
return 0;
@@ -803,17 +803,17 @@
return;
}
if (status) {
- pr_err("error in video pipe: %d\n", status);
+ dev_err(go->dev, "error in video pipe: %d\n", status);
return;
}
if (urb->actual_length != urb->transfer_buffer_length) {
- pr_err("short read in video pipe!\n");
+ dev_err(go->dev, "short read in video pipe!\n");
return;
}
go7007_parse_video_stream(go, urb->transfer_buffer, urb->actual_length);
r = usb_submit_urb(urb, GFP_ATOMIC);
if (r < 0)
- pr_err("error in video pipe: %d\n", r);
+ dev_err(go->dev, "error in video pipe: %d\n", r);
}
static void go7007_usb_read_audio_pipe_complete(struct urb *urb)
@@ -824,19 +824,19 @@
if (!vb2_is_streaming(&go->vidq))
return;
if (status) {
- pr_err("error in audio pipe: %d\n",
+ dev_err(go->dev, "error in audio pipe: %d\n",
status);
return;
}
if (urb->actual_length != urb->transfer_buffer_length) {
- pr_err("short read in audio pipe!\n");
+ dev_err(go->dev, "short read in audio pipe!\n");
return;
}
if (go->audio_deliver != NULL)
go->audio_deliver(go, urb->transfer_buffer, urb->actual_length);
r = usb_submit_urb(urb, GFP_ATOMIC);
if (r < 0)
- pr_err("error in audio pipe: %d\n", r);
+ dev_err(go->dev, "error in audio pipe: %d\n", r);
}
static int go7007_usb_stream_start(struct go7007 *go)
@@ -847,7 +847,7 @@
for (i = 0; i < 8; ++i) {
r = usb_submit_urb(usb->video_urbs[i], GFP_KERNEL);
if (r < 0) {
- pr_err("error submitting video urb %d: %d\n", i, r);
+ dev_err(go->dev, "error submitting video urb %d: %d\n", i, r);
goto video_submit_failed;
}
}
@@ -857,7 +857,7 @@
for (i = 0; i < 8; ++i) {
r = usb_submit_urb(usb->audio_urbs[i], GFP_KERNEL);
if (r < 0) {
- pr_err("error submitting audio urb %d: %d\n", i, r);
+ dev_err(go->dev, "error submitting audio urb %d: %d\n", i, r);
goto audio_submit_failed;
}
}
@@ -1099,7 +1099,7 @@
board = &board_px_tv402u;
break;
case GO7007_BOARDID_LIFEVIEW_LR192:
- pr_err("The Lifeview TV Walker Ultra is not supported. Sorry!\n");
+ dev_err(go->dev, "The Lifeview TV Walker Ultra is not supported. Sorry!\n");
return -ENODEV;
name = "Lifeview TV Walker Ultra";
board = &board_lifeview_lr192;
@@ -1114,7 +1114,7 @@
board = &board_ads_usbav_709;
break;
default:
- pr_err("unknown board ID %d!\n",
+ dev_err(go->dev, "unknown board ID %d!\n",
(unsigned int)id->driver_info);
return -ENODEV;
}
@@ -1173,7 +1173,7 @@
go->i2c_adapter.dev.parent = go->dev;
i2c_set_adapdata(&go->i2c_adapter, go);
if (i2c_add_adapter(&go->i2c_adapter) < 0) {
- pr_err("error: i2c_add_adapter failed\n");
+ dev_err(go->dev, "error: i2c_add_adapter failed\n");
goto allocfail;
}
go->i2c_adapter_online = 1;
@@ -1225,7 +1225,7 @@
/* Board strapping indicates tuner model */
if (go7007_usb_vendor_request(go, 0x41, 0, 0, go->usb_buf, 3,
1) < 0) {
- pr_err("GPIO read failed!\n");
+ dev_err(go->dev, "GPIO read failed!\n");
goto allocfail;
}
switch (go->usb_buf[0] >> 6) {
@@ -1256,7 +1256,7 @@
* to the EZ-USB GPIO output pins */
if (go7007_usb_vendor_request(go, 0x40, 0x7f02, 0,
NULL, 0, 0) < 0) {
- pr_err("GPIO write failed!\n");
+ dev_err(go->dev, "GPIO write failed!\n");
goto allocfail;
}
}
@@ -1265,7 +1265,7 @@
* a USB1.1 port. There will be silent corruption of the stream. */
if ((board->flags & GO7007_USB_EZUSB) &&
usbdev->speed != USB_SPEED_HIGH)
- pr_err("*** WARNING *** This device must be connected to a USB 2.0 port! Attempting to capture video through a USB 1.1 port will result in stream corruption, even at low bitrates!\n");
+ dev_err(go->dev, "*** WARNING *** This device must be connected to a USB 2.0 port! Attempting to capture video through a USB 1.1 port will result in stream corruption, even at low bitrates!\n");
/* Allocate the URBs and buffers for receiving the video stream */
if (board->flags & GO7007_USB_EZUSB) {