| /* |
| * This file is part of wl1271 |
| * |
| * Copyright (C) 2008-2009 Nokia Corporation |
| * |
| * Contact: Luciano Coelho <luciano.coelho@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/firmware.h> |
| #include <linux/delay.h> |
| #include <linux/irq.h> |
| #include <linux/spi/spi.h> |
| #include <linux/crc32.h> |
| #include <linux/etherdevice.h> |
| #include <linux/vmalloc.h> |
| #include <linux/spi/wl12xx.h> |
| |
| #include "wl1271.h" |
| #include "wl12xx_80211.h" |
| #include "wl1271_reg.h" |
| #include "wl1271_spi.h" |
| #include "wl1271_event.h" |
| #include "wl1271_tx.h" |
| #include "wl1271_rx.h" |
| #include "wl1271_ps.h" |
| #include "wl1271_init.h" |
| #include "wl1271_debugfs.h" |
| #include "wl1271_cmd.h" |
| #include "wl1271_boot.h" |
| |
| static int wl1271_plt_init(struct wl1271 *wl) |
| { |
| int ret; |
| |
| ret = wl1271_acx_init_mem_config(wl); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1271_cmd_data_path(wl, wl->channel, 1); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void wl1271_disable_interrupts(struct wl1271 *wl) |
| { |
| disable_irq(wl->irq); |
| } |
| |
| static void wl1271_power_off(struct wl1271 *wl) |
| { |
| wl->set_power(false); |
| } |
| |
| static void wl1271_power_on(struct wl1271 *wl) |
| { |
| wl->set_power(true); |
| } |
| |
| static void wl1271_fw_status(struct wl1271 *wl, struct wl1271_fw_status *status) |
| { |
| u32 total = 0; |
| int i; |
| |
| /* |
| * FIXME: Reading the FW status directly from the registers seems to |
| * be the right thing to do, but it doesn't work. And in the |
| * reference driver, there is a workaround called |
| * USE_SDIO_24M_WORKAROUND, which reads the status from memory |
| * instead, so we do the same here. |
| */ |
| |
| wl1271_spi_mem_read(wl, STATUS_MEM_ADDRESS, status, sizeof(*status)); |
| |
| wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, " |
| "drv_rx_counter = %d, tx_results_counter = %d)", |
| status->intr, |
| status->fw_rx_counter, |
| status->drv_rx_counter, |
| status->tx_results_counter); |
| |
| /* update number of available TX blocks */ |
| for (i = 0; i < NUM_TX_QUEUES; i++) { |
| u32 cnt = status->tx_released_blks[i] - wl->tx_blocks_freed[i]; |
| wl->tx_blocks_freed[i] = status->tx_released_blks[i]; |
| wl->tx_blocks_available += cnt; |
| total += cnt; |
| } |
| |
| /* if more blocks are available now, schedule some tx work */ |
| if (total && !skb_queue_empty(&wl->tx_queue)) |
| ieee80211_queue_work(wl->hw, &wl->tx_work); |
| |
| /* update the host-chipset time offset */ |
| wl->time_offset = jiffies_to_usecs(jiffies) - status->fw_localtime; |
| } |
| |
| #define WL1271_IRQ_MAX_LOOPS 10 |
| static void wl1271_irq_work(struct work_struct *work) |
| { |
| u32 intr, ctr = WL1271_IRQ_MAX_LOOPS; |
| int ret; |
| struct wl1271 *wl = |
| container_of(work, struct wl1271, irq_work); |
| |
| mutex_lock(&wl->mutex); |
| |
| wl1271_debug(DEBUG_IRQ, "IRQ work"); |
| |
| if (wl->state == WL1271_STATE_OFF) |
| goto out; |
| |
| ret = wl1271_ps_elp_wakeup(wl, true); |
| if (ret < 0) |
| goto out; |
| |
| wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL); |
| |
| intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR); |
| if (!intr) { |
| wl1271_debug(DEBUG_IRQ, "Zero interrupt received."); |
| goto out_sleep; |
| } |
| |
| intr &= WL1271_INTR_MASK; |
| |
| do { |
| wl1271_fw_status(wl, wl->fw_status); |
| |
| |
| if (intr & (WL1271_ACX_INTR_EVENT_A | |
| WL1271_ACX_INTR_EVENT_B)) { |
| wl1271_debug(DEBUG_IRQ, |
| "WL1271_ACX_INTR_EVENT (0x%x)", intr); |
| if (intr & WL1271_ACX_INTR_EVENT_A) |
| wl1271_event_handle(wl, 0); |
| else |
| wl1271_event_handle(wl, 1); |
| } |
| |
| if (intr & WL1271_ACX_INTR_INIT_COMPLETE) |
| wl1271_debug(DEBUG_IRQ, |
| "WL1271_ACX_INTR_INIT_COMPLETE"); |
| |
| if (intr & WL1271_ACX_INTR_HW_AVAILABLE) |
| wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_HW_AVAILABLE"); |
| |
| if (intr & WL1271_ACX_INTR_DATA) { |
| u8 tx_res_cnt = wl->fw_status->tx_results_counter - |
| wl->tx_results_count; |
| |
| wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA"); |
| |
| /* check for tx results */ |
| if (tx_res_cnt) |
| wl1271_tx_complete(wl, tx_res_cnt); |
| |
| wl1271_rx(wl, wl->fw_status); |
| } |
| |
| intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR); |
| intr &= WL1271_INTR_MASK; |
| } while (intr && --ctr); |
| |
| out_sleep: |
| wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK, |
| WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK)); |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static irqreturn_t wl1271_irq(int irq, void *cookie) |
| { |
| struct wl1271 *wl; |
| unsigned long flags; |
| |
| wl1271_debug(DEBUG_IRQ, "IRQ"); |
| |
| wl = cookie; |
| |
| /* complete the ELP completion */ |
| spin_lock_irqsave(&wl->wl_lock, flags); |
| if (wl->elp_compl) { |
| complete(wl->elp_compl); |
| wl->elp_compl = NULL; |
| } |
| |
| ieee80211_queue_work(wl->hw, &wl->irq_work); |
| spin_unlock_irqrestore(&wl->wl_lock, flags); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int wl1271_fetch_firmware(struct wl1271 *wl) |
| { |
| const struct firmware *fw; |
| int ret; |
| |
| ret = request_firmware(&fw, WL1271_FW_NAME, &wl->spi->dev); |
| |
| if (ret < 0) { |
| wl1271_error("could not get firmware: %d", ret); |
| return ret; |
| } |
| |
| if (fw->size % 4) { |
| wl1271_error("firmware size is not multiple of 32 bits: %zu", |
| fw->size); |
| ret = -EILSEQ; |
| goto out; |
| } |
| |
| wl->fw_len = fw->size; |
| wl->fw = vmalloc(wl->fw_len); |
| |
| if (!wl->fw) { |
| wl1271_error("could not allocate memory for the firmware"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| memcpy(wl->fw, fw->data, wl->fw_len); |
| |
| ret = 0; |
| |
| out: |
| release_firmware(fw); |
| |
| return ret; |
| } |
| |
| static int wl1271_fetch_nvs(struct wl1271 *wl) |
| { |
| const struct firmware *fw; |
| int ret; |
| |
| ret = request_firmware(&fw, WL1271_NVS_NAME, &wl->spi->dev); |
| |
| if (ret < 0) { |
| wl1271_error("could not get nvs file: %d", ret); |
| return ret; |
| } |
| |
| if (fw->size % 4) { |
| wl1271_error("nvs size is not multiple of 32 bits: %zu", |
| fw->size); |
| ret = -EILSEQ; |
| goto out; |
| } |
| |
| wl->nvs_len = fw->size; |
| wl->nvs = kmalloc(wl->nvs_len, GFP_KERNEL); |
| |
| if (!wl->nvs) { |
| wl1271_error("could not allocate memory for the nvs file"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| memcpy(wl->nvs, fw->data, wl->nvs_len); |
| |
| ret = 0; |
| |
| out: |
| release_firmware(fw); |
| |
| return ret; |
| } |
| |
| static void wl1271_fw_wakeup(struct wl1271 *wl) |
| { |
| u32 elp_reg; |
| |
| elp_reg = ELPCTRL_WAKE_UP; |
| wl1271_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg); |
| } |
| |
| static int wl1271_setup(struct wl1271 *wl) |
| { |
| wl->fw_status = kmalloc(sizeof(*wl->fw_status), GFP_KERNEL); |
| if (!wl->fw_status) |
| return -ENOMEM; |
| |
| wl->tx_res_if = kmalloc(sizeof(*wl->tx_res_if), GFP_KERNEL); |
| if (!wl->tx_res_if) { |
| kfree(wl->fw_status); |
| return -ENOMEM; |
| } |
| |
| INIT_WORK(&wl->irq_work, wl1271_irq_work); |
| INIT_WORK(&wl->tx_work, wl1271_tx_work); |
| return 0; |
| } |
| |
| static int wl1271_chip_wakeup(struct wl1271 *wl) |
| { |
| struct wl1271_partition_set partition; |
| int ret = 0; |
| |
| wl1271_power_on(wl); |
| msleep(WL1271_POWER_ON_SLEEP); |
| wl1271_spi_reset(wl); |
| wl1271_spi_init(wl); |
| |
| /* We don't need a real memory partition here, because we only want |
| * to use the registers at this point. */ |
| memset(&partition, 0, sizeof(partition)); |
| partition.reg.start = REGISTERS_BASE; |
| partition.reg.size = REGISTERS_DOWN_SIZE; |
| wl1271_set_partition(wl, &partition); |
| |
| /* ELP module wake up */ |
| wl1271_fw_wakeup(wl); |
| |
| /* whal_FwCtrl_BootSm() */ |
| |
| /* 0. read chip id from CHIP_ID */ |
| wl->chip.id = wl1271_reg_read32(wl, CHIP_ID_B); |
| |
| /* 1. check if chip id is valid */ |
| |
| switch (wl->chip.id) { |
| case CHIP_ID_1271_PG10: |
| wl1271_warning("chip id 0x%x (1271 PG10) support is obsolete", |
| wl->chip.id); |
| |
| ret = wl1271_setup(wl); |
| if (ret < 0) |
| goto out; |
| break; |
| case CHIP_ID_1271_PG20: |
| wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)", |
| wl->chip.id); |
| |
| ret = wl1271_setup(wl); |
| if (ret < 0) |
| goto out; |
| break; |
| default: |
| wl1271_error("unsupported chip id: 0x%x", wl->chip.id); |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| if (wl->fw == NULL) { |
| ret = wl1271_fetch_firmware(wl); |
| if (ret < 0) |
| goto out; |
| } |
| |
| /* No NVS from netlink, try to get it from the filesystem */ |
| if (wl->nvs == NULL) { |
| ret = wl1271_fetch_nvs(wl); |
| if (ret < 0) |
| goto out; |
| } |
| |
| out: |
| return ret; |
| } |
| |
| struct wl1271_filter_params { |
| unsigned int filters; |
| unsigned int changed; |
| int mc_list_length; |
| u8 mc_list[ACX_MC_ADDRESS_GROUP_MAX][ETH_ALEN]; |
| }; |
| |
| #define WL1271_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \ |
| FIF_ALLMULTI | \ |
| FIF_FCSFAIL | \ |
| FIF_BCN_PRBRESP_PROMISC | \ |
| FIF_CONTROL | \ |
| FIF_OTHER_BSS) |
| |
| static void wl1271_filter_work(struct work_struct *work) |
| { |
| struct wl1271 *wl = |
| container_of(work, struct wl1271, filter_work); |
| struct wl1271_filter_params *fp; |
| unsigned long flags; |
| bool enabled = true; |
| int ret; |
| |
| /* first, get the filter parameters */ |
| spin_lock_irqsave(&wl->wl_lock, flags); |
| fp = wl->filter_params; |
| wl->filter_params = NULL; |
| spin_unlock_irqrestore(&wl->wl_lock, flags); |
| |
| if (!fp) |
| return; |
| |
| /* then, lock the mutex without risk of lock-up */ |
| mutex_lock(&wl->mutex); |
| |
| if (wl->state == WL1271_STATE_OFF) |
| goto out; |
| |
| ret = wl1271_ps_elp_wakeup(wl, false); |
| if (ret < 0) |
| goto out; |
| |
| /* configure the mc filter regardless of the changed flags */ |
| if (fp->filters & FIF_ALLMULTI) |
| enabled = false; |
| |
| ret = wl1271_acx_group_address_tbl(wl, enabled, |
| fp->mc_list, fp->mc_list_length); |
| if (ret < 0) |
| goto out_sleep; |
| |
| /* determine, whether supported filter values have changed */ |
| if (fp->changed == 0) |
| goto out; |
| |
| /* apply configured filters */ |
| ret = wl1271_cmd_join(wl); |
| if (ret < 0) |
| goto out_sleep; |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| kfree(fp); |
| } |
| |
| int wl1271_plt_start(struct wl1271 *wl) |
| { |
| int ret; |
| |
| mutex_lock(&wl->mutex); |
| |
| wl1271_notice("power up"); |
| |
| if (wl->state != WL1271_STATE_OFF) { |
| wl1271_error("cannot go into PLT state because not " |
| "in off state: %d", wl->state); |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| wl->state = WL1271_STATE_PLT; |
| |
| ret = wl1271_chip_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl1271_boot(wl); |
| if (ret < 0) |
| goto out; |
| |
| wl1271_notice("firmware booted in PLT mode (%s)", wl->chip.fw_ver); |
| |
| ret = wl1271_plt_init(wl); |
| if (ret < 0) |
| goto out; |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| int wl1271_plt_stop(struct wl1271 *wl) |
| { |
| int ret = 0; |
| |
| mutex_lock(&wl->mutex); |
| |
| wl1271_notice("power down"); |
| |
| if (wl->state != WL1271_STATE_PLT) { |
| wl1271_error("cannot power down because not in PLT " |
| "state: %d", wl->state); |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| wl1271_disable_interrupts(wl); |
| wl1271_power_off(wl); |
| |
| wl->state = WL1271_STATE_OFF; |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| |
| static int wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) |
| { |
| struct wl1271 *wl = hw->priv; |
| |
| skb_queue_tail(&wl->tx_queue, skb); |
| |
| /* |
| * The chip specific setup must run before the first TX packet - |
| * before that, the tx_work will not be initialized! |
| */ |
| |
| ieee80211_queue_work(wl->hw, &wl->tx_work); |
| |
| /* |
| * The workqueue is slow to process the tx_queue and we need stop |
| * the queue here, otherwise the queue will get too long. |
| */ |
| if (skb_queue_len(&wl->tx_queue) >= WL1271_TX_QUEUE_MAX_LENGTH) { |
| ieee80211_stop_queues(wl->hw); |
| |
| /* |
| * FIXME: this is racy, the variable is not properly |
| * protected. Maybe fix this by removing the stupid |
| * variable altogether and checking the real queue state? |
| */ |
| wl->tx_queue_stopped = true; |
| } |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static int wl1271_op_start(struct ieee80211_hw *hw) |
| { |
| struct wl1271 *wl = hw->priv; |
| int ret = 0; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 start"); |
| |
| mutex_lock(&wl->mutex); |
| |
| if (wl->state != WL1271_STATE_OFF) { |
| wl1271_error("cannot start because not in off state: %d", |
| wl->state); |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| ret = wl1271_chip_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl1271_boot(wl); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl1271_hw_init(wl); |
| if (ret < 0) |
| goto out; |
| |
| wl->state = WL1271_STATE_ON; |
| |
| wl1271_info("firmware booted (%s)", wl->chip.fw_ver); |
| |
| out: |
| if (ret < 0) |
| wl1271_power_off(wl); |
| |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| static void wl1271_op_stop(struct ieee80211_hw *hw) |
| { |
| struct wl1271 *wl = hw->priv; |
| unsigned long flags; |
| int i; |
| |
| wl1271_info("down"); |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 stop"); |
| |
| /* complete/cancel ongoing work */ |
| cancel_work_sync(&wl->filter_work); |
| spin_lock_irqsave(&wl->wl_lock, flags); |
| kfree(wl->filter_params); |
| wl->filter_params = NULL; |
| spin_unlock_irqrestore(&wl->wl_lock, flags); |
| |
| mutex_lock(&wl->mutex); |
| |
| WARN_ON(wl->state != WL1271_STATE_ON); |
| |
| if (wl->scanning) { |
| mutex_unlock(&wl->mutex); |
| ieee80211_scan_completed(wl->hw, true); |
| mutex_lock(&wl->mutex); |
| wl->scanning = false; |
| } |
| |
| wl->state = WL1271_STATE_OFF; |
| |
| wl1271_disable_interrupts(wl); |
| |
| mutex_unlock(&wl->mutex); |
| |
| cancel_work_sync(&wl->irq_work); |
| cancel_work_sync(&wl->tx_work); |
| cancel_work_sync(&wl->filter_work); |
| |
| mutex_lock(&wl->mutex); |
| |
| /* let's notify MAC80211 about the remaining pending TX frames */ |
| wl1271_tx_flush(wl); |
| wl1271_power_off(wl); |
| |
| memset(wl->bssid, 0, ETH_ALEN); |
| memset(wl->ssid, 0, IW_ESSID_MAX_SIZE + 1); |
| wl->ssid_len = 0; |
| wl->listen_int = 1; |
| wl->bss_type = MAX_BSS_TYPE; |
| wl->band = IEEE80211_BAND_2GHZ; |
| |
| wl->rx_counter = 0; |
| wl->elp = false; |
| wl->psm = 0; |
| wl->tx_queue_stopped = false; |
| wl->power_level = WL1271_DEFAULT_POWER_LEVEL; |
| wl->tx_blocks_available = 0; |
| wl->tx_results_count = 0; |
| wl->tx_packets_count = 0; |
| wl->tx_security_last_seq = 0; |
| wl->tx_security_seq_16 = 0; |
| wl->tx_security_seq_32 = 0; |
| wl->time_offset = 0; |
| wl->session_counter = 0; |
| wl->joined = false; |
| |
| for (i = 0; i < NUM_TX_QUEUES; i++) |
| wl->tx_blocks_freed[i] = 0; |
| |
| wl1271_debugfs_reset(wl); |
| mutex_unlock(&wl->mutex); |
| } |
| |
| static int wl1271_op_add_interface(struct ieee80211_hw *hw, |
| struct ieee80211_if_init_conf *conf) |
| { |
| struct wl1271 *wl = hw->priv; |
| int ret = 0; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM", |
| conf->type, conf->mac_addr); |
| |
| mutex_lock(&wl->mutex); |
| if (wl->vif) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| wl->vif = conf->vif; |
| |
| switch (conf->type) { |
| case NL80211_IFTYPE_STATION: |
| wl->bss_type = BSS_TYPE_STA_BSS; |
| break; |
| case NL80211_IFTYPE_ADHOC: |
| wl->bss_type = BSS_TYPE_IBSS; |
| break; |
| default: |
| ret = -EOPNOTSUPP; |
| goto out; |
| } |
| |
| /* FIXME: what if conf->mac_addr changes? */ |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| return ret; |
| } |
| |
| static void wl1271_op_remove_interface(struct ieee80211_hw *hw, |
| struct ieee80211_if_init_conf *conf) |
| { |
| struct wl1271 *wl = hw->priv; |
| |
| mutex_lock(&wl->mutex); |
| wl1271_debug(DEBUG_MAC80211, "mac80211 remove interface"); |
| wl->vif = NULL; |
| mutex_unlock(&wl->mutex); |
| } |
| |
| #if 0 |
| static int wl1271_op_config_interface(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_if_conf *conf) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct sk_buff *beacon; |
| int ret; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 config_interface bssid %pM", |
| conf->bssid); |
| wl1271_dump_ascii(DEBUG_MAC80211, "ssid: ", conf->ssid, |
| conf->ssid_len); |
| |
| mutex_lock(&wl->mutex); |
| |
| ret = wl1271_ps_elp_wakeup(wl, false); |
| if (ret < 0) |
| goto out; |
| |
| memcpy(wl->bssid, conf->bssid, ETH_ALEN); |
| |
| ret = wl1271_cmd_build_null_data(wl); |
| if (ret < 0) |
| goto out_sleep; |
| |
| wl->ssid_len = conf->ssid_len; |
| if (wl->ssid_len) |
| memcpy(wl->ssid, conf->ssid, wl->ssid_len); |
| |
| if (wl->bss_type != BSS_TYPE_IBSS) { |
| ret = wl1271_cmd_join(wl); |
| if (ret < 0) |
| goto out_sleep; |
| } |
| |
| if (conf->changed & IEEE80211_IFCC_BEACON) { |
| beacon = ieee80211_beacon_get(hw, vif); |
| ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON, |
| beacon->data, beacon->len); |
| |
| if (ret < 0) { |
| dev_kfree_skb(beacon); |
| goto out_sleep; |
| } |
| |
| ret = wl1271_cmd_template_set(wl, CMD_TEMPL_PROBE_RESPONSE, |
| beacon->data, beacon->len); |
| |
| dev_kfree_skb(beacon); |
| |
| if (ret < 0) |
| goto out_sleep; |
| |
| ret = wl1271_cmd_join(wl); |
| |
| if (ret < 0) |
| goto out_sleep; |
| } |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| #endif |
| |
| static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct ieee80211_conf *conf = &hw->conf; |
| int channel, ret = 0; |
| |
| channel = ieee80211_frequency_to_channel(conf->channel->center_freq); |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d", |
| channel, |
| conf->flags & IEEE80211_CONF_PS ? "on" : "off", |
| conf->power_level); |
| |
| mutex_lock(&wl->mutex); |
| |
| wl->band = conf->channel->band; |
| |
| ret = wl1271_ps_elp_wakeup(wl, false); |
| if (ret < 0) |
| goto out; |
| |
| if (channel != wl->channel) { |
| u8 old_channel = wl->channel; |
| wl->channel = channel; |
| |
| ret = wl1271_cmd_join(wl); |
| if (ret < 0) { |
| wl->channel = old_channel; |
| goto out_sleep; |
| } |
| } |
| |
| ret = wl1271_cmd_build_null_data(wl); |
| if (ret < 0) |
| goto out_sleep; |
| |
| if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) { |
| wl1271_info("psm enabled"); |
| |
| wl->psm_requested = true; |
| |
| /* |
| * We enter PSM only if we're already associated. |
| * If we're not, we'll enter it when joining an SSID, |
| * through the bss_info_changed() hook. |
| */ |
| ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE); |
| } else if (!(conf->flags & IEEE80211_CONF_PS) && |
| wl->psm_requested) { |
| wl1271_info("psm disabled"); |
| |
| wl->psm_requested = false; |
| |
| if (wl->psm) |
| ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE); |
| } |
| |
| if (conf->power_level != wl->power_level) { |
| ret = wl1271_acx_tx_power(wl, conf->power_level); |
| if (ret < 0) |
| goto out; |
| |
| wl->power_level = conf->power_level; |
| } |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| static u64 wl1271_op_prepare_multicast(struct ieee80211_hw *hw, int mc_count, |
| struct dev_addr_list *mc_list) |
| { |
| struct wl1271 *wl = hw->priv; |
| struct wl1271_filter_params *fp; |
| unsigned long flags; |
| int i; |
| |
| /* |
| * FIXME: we should return a hash that will be passed to |
| * configure_filter() instead of saving everything in the context. |
| */ |
| |
| fp = kzalloc(sizeof(*fp), GFP_KERNEL); |
| if (!fp) { |
| wl1271_error("Out of memory setting filters."); |
| return 0; |
| } |
| |
| /* update multicast filtering parameters */ |
| if (mc_count > ACX_MC_ADDRESS_GROUP_MAX) { |
| mc_count = 0; |
| fp->filters |= FIF_ALLMULTI; |
| } |
| |
| fp->mc_list_length = 0; |
| for (i = 0; i < mc_count; i++) { |
| if (mc_list->da_addrlen == ETH_ALEN) { |
| memcpy(fp->mc_list[fp->mc_list_length], |
| mc_list->da_addr, ETH_ALEN); |
| fp->mc_list_length++; |
| } else |
| wl1271_warning("Unknown mc address length."); |
| } |
| |
| spin_lock_irqsave(&wl->wl_lock, flags); |
| kfree(wl->filter_params); |
| wl->filter_params = fp; |
| spin_unlock_irqrestore(&wl->wl_lock, flags); |
| |
| return 1; |
| } |
| |
| static void wl1271_op_configure_filter(struct ieee80211_hw *hw, |
| unsigned int changed, |
| unsigned int *total, u64 multicast) |
| { |
| struct wl1271 *wl = hw->priv; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 configure filter"); |
| |
| *total &= WL1271_SUPPORTED_FILTERS; |
| changed &= WL1271_SUPPORTED_FILTERS; |
| |
| if (!multicast) |
| return; |
| |
| /* |
| * FIXME: for now we are still using a workqueue for filter |
| * configuration, but with the new mac80211, this is not needed, |
| * since configure_filter can now sleep. We now have |
| * prepare_multicast, which needs to be atomic instead. |
| */ |
| |
| /* store current filter config */ |
| wl->filter_params->filters = *total; |
| wl->filter_params->changed = changed; |
| |
| ieee80211_queue_work(wl->hw, &wl->filter_work); |
| } |
| |
| static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, |
| struct ieee80211_vif *vif, |
| struct ieee80211_sta *sta, |
| struct ieee80211_key_conf *key_conf) |
| { |
| struct wl1271 *wl = hw->priv; |
| const u8 *addr; |
| int ret; |
| u32 tx_seq_32 = 0; |
| u16 tx_seq_16 = 0; |
| u8 key_type; |
| |
| static const u8 bcast_addr[ETH_ALEN] = |
| { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 set key"); |
| |
| addr = sta ? sta->addr : bcast_addr; |
| |
| wl1271_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd); |
| wl1271_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN); |
| wl1271_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x", |
| key_conf->alg, key_conf->keyidx, |
| key_conf->keylen, key_conf->flags); |
| wl1271_dump(DEBUG_CRYPT, "KEY: ", key_conf->key, key_conf->keylen); |
| |
| if (is_zero_ether_addr(addr)) { |
| /* We dont support TX only encryption */ |
| ret = -EOPNOTSUPP; |
| goto out; |
| } |
| |
| mutex_lock(&wl->mutex); |
| |
| ret = wl1271_ps_elp_wakeup(wl, false); |
| if (ret < 0) |
| goto out_unlock; |
| |
| switch (key_conf->alg) { |
| case ALG_WEP: |
| key_type = KEY_WEP; |
| |
| key_conf->hw_key_idx = key_conf->keyidx; |
| break; |
| case ALG_TKIP: |
| key_type = KEY_TKIP; |
| |
| key_conf->hw_key_idx = key_conf->keyidx; |
| tx_seq_32 = wl->tx_security_seq_32; |
| tx_seq_16 = wl->tx_security_seq_16; |
| break; |
| case ALG_CCMP: |
| key_type = KEY_AES; |
| |
| key_conf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; |
| tx_seq_32 = wl->tx_security_seq_32; |
| tx_seq_16 = wl->tx_security_seq_16; |
| break; |
| default: |
| wl1271_error("Unknown key algo 0x%x", key_conf->alg); |
| |
| ret = -EOPNOTSUPP; |
| goto out_sleep; |
| } |
| |
| switch (cmd) { |
| case SET_KEY: |
| ret = wl1271_cmd_set_key(wl, KEY_ADD_OR_REPLACE, |
| key_conf->keyidx, key_type, |
| key_conf->keylen, key_conf->key, |
| addr, tx_seq_32, tx_seq_16); |
| if (ret < 0) { |
| wl1271_error("Could not add or replace key"); |
| goto out_sleep; |
| } |
| break; |
| |
| case DISABLE_KEY: |
| ret = wl1271_cmd_set_key(wl, KEY_REMOVE, |
| key_conf->keyidx, key_type, |
| key_conf->keylen, key_conf->key, |
| addr, 0, 0); |
| if (ret < 0) { |
| wl1271_error("Could not remove key"); |
| goto out_sleep; |
| } |
| break; |
| |
| default: |
| wl1271_error("Unsupported key cmd 0x%x", cmd); |
| ret = -EOPNOTSUPP; |
| goto out_sleep; |
| |
| break; |
| } |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| |
| out_unlock: |
| mutex_unlock(&wl->mutex); |
| |
| out: |
| return ret; |
| } |
| |
| static int wl1271_op_hw_scan(struct ieee80211_hw *hw, |
| struct cfg80211_scan_request *req) |
| { |
| struct wl1271 *wl = hw->priv; |
| int ret; |
| u8 *ssid = NULL; |
| size_t ssid_len = 0; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 hw scan"); |
| |
| if (req->n_ssids) { |
| ssid = req->ssids[0].ssid; |
| ssid_len = req->ssids[0].ssid_len; |
| } |
| |
| mutex_lock(&wl->mutex); |
| |
| ret = wl1271_ps_elp_wakeup(wl, false); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl1271_cmd_scan(hw->priv, ssid, ssid_len, 1, 0, 13, 3); |
| |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| static int wl1271_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value) |
| { |
| struct wl1271 *wl = hw->priv; |
| int ret; |
| |
| mutex_lock(&wl->mutex); |
| |
| ret = wl1271_ps_elp_wakeup(wl, false); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl1271_acx_rts_threshold(wl, (u16) value); |
| if (ret < 0) |
| wl1271_warning("wl1271_op_set_rts_threshold failed: %d", ret); |
| |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| return ret; |
| } |
| |
| static u32 wl1271_enabled_rates_get(struct wl1271 *wl, u64 basic_rate_set) |
| { |
| struct ieee80211_supported_band *band; |
| u32 enabled_rates = 0; |
| int bit; |
| |
| band = wl->hw->wiphy->bands[wl->band]; |
| for (bit = 0; bit < band->n_bitrates; bit++) { |
| if (basic_rate_set & 0x1) |
| enabled_rates |= band->bitrates[bit].hw_value; |
| basic_rate_set >>= 1; |
| } |
| |
| return enabled_rates; |
| } |
| |
| static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_bss_conf *bss_conf, |
| u32 changed) |
| { |
| enum wl1271_cmd_ps_mode mode; |
| struct wl1271 *wl = hw->priv; |
| int ret; |
| |
| wl1271_debug(DEBUG_MAC80211, "mac80211 bss info changed"); |
| |
| mutex_lock(&wl->mutex); |
| |
| ret = wl1271_ps_elp_wakeup(wl, false); |
| if (ret < 0) |
| goto out; |
| |
| if (changed & BSS_CHANGED_ASSOC) { |
| if (bss_conf->assoc) { |
| wl->beacon_int = bss_conf->beacon_int; |
| wl->dtim_period = bss_conf->dtim_period; |
| wl->aid = bss_conf->aid; |
| |
| ret = wl1271_cmd_join(wl); |
| if (ret < 0) { |
| wl1271_warning("Association configuration " |
| "failed %d", ret); |
| goto out_sleep; |
| } |
| |
| ret = wl1271_cmd_build_ps_poll(wl, wl->aid); |
| if (ret < 0) |
| goto out_sleep; |
| |
| ret = wl1271_acx_aid(wl, wl->aid); |
| if (ret < 0) |
| goto out_sleep; |
| |
| /* If we want to go in PSM but we're not there yet */ |
| if (wl->psm_requested && !wl->psm) { |
| mode = STATION_POWER_SAVE_MODE; |
| ret = wl1271_ps_set_mode(wl, mode); |
| if (ret < 0) |
| goto out_sleep; |
| } |
| } else { |
| /* use defaults when not associated */ |
| wl->beacon_int = WL1271_DEFAULT_BEACON_INT; |
| wl->dtim_period = WL1271_DEFAULT_DTIM_PERIOD; |
| wl->basic_rate_set = WL1271_DEFAULT_BASIC_RATE_SET; |
| wl->aid = 0; |
| } |
| |
| } |
| |
| if (changed & BSS_CHANGED_ERP_SLOT) { |
| if (bss_conf->use_short_slot) |
| ret = wl1271_acx_slot(wl, SLOT_TIME_SHORT); |
| else |
| ret = wl1271_acx_slot(wl, SLOT_TIME_LONG); |
| if (ret < 0) { |
| wl1271_warning("Set slot time failed %d", ret); |
| goto out_sleep; |
| } |
| } |
| |
| if (changed & BSS_CHANGED_ERP_PREAMBLE) { |
| if (bss_conf->use_short_preamble) |
| wl1271_acx_set_preamble(wl, ACX_PREAMBLE_SHORT); |
| else |
| wl1271_acx_set_preamble(wl, ACX_PREAMBLE_LONG); |
| } |
| |
| if (changed & BSS_CHANGED_ERP_CTS_PROT) { |
| if (bss_conf->use_cts_prot) |
| ret = wl1271_acx_cts_protect(wl, CTSPROTECT_ENABLE); |
| else |
| ret = wl1271_acx_cts_protect(wl, CTSPROTECT_DISABLE); |
| if (ret < 0) { |
| wl1271_warning("Set ctsprotect failed %d", ret); |
| goto out_sleep; |
| } |
| } |
| |
| if (changed & BSS_CHANGED_BASIC_RATES) { |
| wl->basic_rate_set = wl1271_enabled_rates_get( |
| wl, bss_conf->basic_rates); |
| ret = wl1271_acx_rate_policies(wl, wl->basic_rate_set); |
| |
| if (ret < 0) { |
| wl1271_warning("Set rate policies failed %d", ret); |
| goto out_sleep; |
| } |
| ret = wl1271_cmd_join(wl); |
| if (ret < 0) { |
| wl1271_warning("Join with new basic rate " |
| "set failed %d", ret); |
| goto out_sleep; |
| } |
| } |
| |
| out_sleep: |
| wl1271_ps_elp_sleep(wl); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| } |
| |
| |
| /* can't be const, mac80211 writes to this */ |
| static struct ieee80211_rate wl1271_rates[] = { |
| { .bitrate = 10, |
| .hw_value = 0x1, |
| .hw_value_short = 0x1, }, |
| { .bitrate = 20, |
| .hw_value = 0x2, |
| .hw_value_short = 0x2, |
| .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| { .bitrate = 55, |
| .hw_value = 0x4, |
| .hw_value_short = 0x4, |
| .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| { .bitrate = 110, |
| .hw_value = 0x20, |
| .hw_value_short = 0x20, |
| .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| { .bitrate = 60, |
| .hw_value = 0x8, |
| .hw_value_short = 0x8, }, |
| { .bitrate = 90, |
| .hw_value = 0x10, |
| .hw_value_short = 0x10, }, |
| { .bitrate = 120, |
| .hw_value = 0x40, |
| .hw_value_short = 0x40, }, |
| { .bitrate = 180, |
| .hw_value = 0x80, |
| .hw_value_short = 0x80, }, |
| { .bitrate = 240, |
| .hw_value = 0x200, |
| .hw_value_short = 0x200, }, |
| { .bitrate = 360, |
| .hw_value = 0x400, |
| .hw_value_short = 0x400, }, |
| { .bitrate = 480, |
| .hw_value = 0x800, |
| .hw_value_short = 0x800, }, |
| { .bitrate = 540, |
| .hw_value = 0x1000, |
| .hw_value_short = 0x1000, }, |
| }; |
| |
| /* can't be const, mac80211 writes to this */ |
| static struct ieee80211_channel wl1271_channels[] = { |
| { .hw_value = 1, .center_freq = 2412}, |
| { .hw_value = 2, .center_freq = 2417}, |
| { .hw_value = 3, .center_freq = 2422}, |
| { .hw_value = 4, .center_freq = 2427}, |
| { .hw_value = 5, .center_freq = 2432}, |
| { .hw_value = 6, .center_freq = 2437}, |
| { .hw_value = 7, .center_freq = 2442}, |
| { .hw_value = 8, .center_freq = 2447}, |
| { .hw_value = 9, .center_freq = 2452}, |
| { .hw_value = 10, .center_freq = 2457}, |
| { .hw_value = 11, .center_freq = 2462}, |
| { .hw_value = 12, .center_freq = 2467}, |
| { .hw_value = 13, .center_freq = 2472}, |
| }; |
| |
| /* can't be const, mac80211 writes to this */ |
| static struct ieee80211_supported_band wl1271_band_2ghz = { |
| .channels = wl1271_channels, |
| .n_channels = ARRAY_SIZE(wl1271_channels), |
| .bitrates = wl1271_rates, |
| .n_bitrates = ARRAY_SIZE(wl1271_rates), |
| }; |
| |
| static const struct ieee80211_ops wl1271_ops = { |
| .start = wl1271_op_start, |
| .stop = wl1271_op_stop, |
| .add_interface = wl1271_op_add_interface, |
| .remove_interface = wl1271_op_remove_interface, |
| .config = wl1271_op_config, |
| /* .config_interface = wl1271_op_config_interface, */ |
| .prepare_multicast = wl1271_op_prepare_multicast, |
| .configure_filter = wl1271_op_configure_filter, |
| .tx = wl1271_op_tx, |
| .set_key = wl1271_op_set_key, |
| .hw_scan = wl1271_op_hw_scan, |
| .bss_info_changed = wl1271_op_bss_info_changed, |
| .set_rts_threshold = wl1271_op_set_rts_threshold, |
| }; |
| |
| static int wl1271_register_hw(struct wl1271 *wl) |
| { |
| int ret; |
| |
| if (wl->mac80211_registered) |
| return 0; |
| |
| SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr); |
| |
| ret = ieee80211_register_hw(wl->hw); |
| if (ret < 0) { |
| wl1271_error("unable to register mac80211 hw: %d", ret); |
| return ret; |
| } |
| |
| wl->mac80211_registered = true; |
| |
| wl1271_notice("loaded"); |
| |
| return 0; |
| } |
| |
| static int wl1271_init_ieee80211(struct wl1271 *wl) |
| { |
| /* The tx descriptor buffer and the TKIP space. */ |
| wl->hw->extra_tx_headroom = WL1271_TKIP_IV_SPACE + |
| sizeof(struct wl1271_tx_hw_descr); |
| |
| /* unit us */ |
| /* FIXME: find a proper value */ |
| wl->hw->channel_change_time = 10000; |
| |
| wl->hw->flags = IEEE80211_HW_SIGNAL_DBM | |
| IEEE80211_HW_NOISE_DBM | |
| IEEE80211_HW_BEACON_FILTER; |
| |
| wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); |
| wl->hw->wiphy->max_scan_ssids = 1; |
| wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1271_band_2ghz; |
| |
| SET_IEEE80211_DEV(wl->hw, &wl->spi->dev); |
| |
| return 0; |
| } |
| |
| static void wl1271_device_release(struct device *dev) |
| { |
| |
| } |
| |
| static struct platform_device wl1271_device = { |
| .name = "wl1271", |
| .id = -1, |
| |
| /* device model insists to have a release function */ |
| .dev = { |
| .release = wl1271_device_release, |
| }, |
| }; |
| |
| #define WL1271_DEFAULT_CHANNEL 0 |
| static int __devinit wl1271_probe(struct spi_device *spi) |
| { |
| struct wl12xx_platform_data *pdata; |
| struct ieee80211_hw *hw; |
| struct wl1271 *wl; |
| int ret, i; |
| static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf}; |
| |
| pdata = spi->dev.platform_data; |
| if (!pdata) { |
| wl1271_error("no platform data"); |
| return -ENODEV; |
| } |
| |
| hw = ieee80211_alloc_hw(sizeof(*wl), &wl1271_ops); |
| if (!hw) { |
| wl1271_error("could not alloc ieee80211_hw"); |
| return -ENOMEM; |
| } |
| |
| wl = hw->priv; |
| memset(wl, 0, sizeof(*wl)); |
| |
| wl->hw = hw; |
| dev_set_drvdata(&spi->dev, wl); |
| wl->spi = spi; |
| |
| skb_queue_head_init(&wl->tx_queue); |
| |
| INIT_WORK(&wl->filter_work, wl1271_filter_work); |
| INIT_DELAYED_WORK(&wl->elp_work, wl1271_elp_work); |
| wl->channel = WL1271_DEFAULT_CHANNEL; |
| wl->scanning = false; |
| wl->default_key = 0; |
| wl->listen_int = 1; |
| wl->rx_counter = 0; |
| wl->rx_config = WL1271_DEFAULT_RX_CONFIG; |
| wl->rx_filter = WL1271_DEFAULT_RX_FILTER; |
| wl->elp = false; |
| wl->psm = 0; |
| wl->psm_requested = false; |
| wl->tx_queue_stopped = false; |
| wl->power_level = WL1271_DEFAULT_POWER_LEVEL; |
| wl->beacon_int = WL1271_DEFAULT_BEACON_INT; |
| wl->dtim_period = WL1271_DEFAULT_DTIM_PERIOD; |
| wl->basic_rate_set = WL1271_DEFAULT_BASIC_RATE_SET; |
| wl->band = IEEE80211_BAND_2GHZ; |
| wl->vif = NULL; |
| wl->joined = false; |
| |
| for (i = 0; i < ACX_TX_DESCRIPTORS; i++) |
| wl->tx_frames[i] = NULL; |
| |
| spin_lock_init(&wl->wl_lock); |
| |
| /* |
| * In case our MAC address is not correctly set, |
| * we use a random but Nokia MAC. |
| */ |
| memcpy(wl->mac_addr, nokia_oui, 3); |
| get_random_bytes(wl->mac_addr + 3, 3); |
| |
| wl->state = WL1271_STATE_OFF; |
| mutex_init(&wl->mutex); |
| |
| wl->rx_descriptor = kmalloc(sizeof(*wl->rx_descriptor), GFP_KERNEL); |
| if (!wl->rx_descriptor) { |
| wl1271_error("could not allocate memory for rx descriptor"); |
| ret = -ENOMEM; |
| goto out_free; |
| } |
| |
| /* This is the only SPI value that we need to set here, the rest |
| * comes from the board-peripherals file */ |
| spi->bits_per_word = 32; |
| |
| ret = spi_setup(spi); |
| if (ret < 0) { |
| wl1271_error("spi_setup failed"); |
| goto out_free; |
| } |
| |
| wl->set_power = pdata->set_power; |
| if (!wl->set_power) { |
| wl1271_error("set power function missing in platform data"); |
| ret = -ENODEV; |
| goto out_free; |
| } |
| |
| wl->irq = spi->irq; |
| if (wl->irq < 0) { |
| wl1271_error("irq missing in platform data"); |
| ret = -ENODEV; |
| goto out_free; |
| } |
| |
| ret = request_irq(wl->irq, wl1271_irq, 0, DRIVER_NAME, wl); |
| if (ret < 0) { |
| wl1271_error("request_irq() failed: %d", ret); |
| goto out_free; |
| } |
| |
| set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING); |
| |
| disable_irq(wl->irq); |
| |
| ret = platform_device_register(&wl1271_device); |
| if (ret) { |
| wl1271_error("couldn't register platform device"); |
| goto out_irq; |
| } |
| dev_set_drvdata(&wl1271_device.dev, wl); |
| |
| ret = wl1271_init_ieee80211(wl); |
| if (ret) |
| goto out_platform; |
| |
| ret = wl1271_register_hw(wl); |
| if (ret) |
| goto out_platform; |
| |
| wl1271_debugfs_init(wl); |
| |
| wl1271_notice("initialized"); |
| |
| return 0; |
| |
| out_platform: |
| platform_device_unregister(&wl1271_device); |
| |
| out_irq: |
| free_irq(wl->irq, wl); |
| |
| out_free: |
| kfree(wl->rx_descriptor); |
| wl->rx_descriptor = NULL; |
| |
| ieee80211_free_hw(hw); |
| |
| return ret; |
| } |
| |
| static int __devexit wl1271_remove(struct spi_device *spi) |
| { |
| struct wl1271 *wl = dev_get_drvdata(&spi->dev); |
| |
| ieee80211_unregister_hw(wl->hw); |
| |
| wl1271_debugfs_exit(wl); |
| platform_device_unregister(&wl1271_device); |
| free_irq(wl->irq, wl); |
| kfree(wl->target_mem_map); |
| vfree(wl->fw); |
| wl->fw = NULL; |
| kfree(wl->nvs); |
| wl->nvs = NULL; |
| |
| kfree(wl->rx_descriptor); |
| wl->rx_descriptor = NULL; |
| |
| kfree(wl->fw_status); |
| kfree(wl->tx_res_if); |
| |
| ieee80211_free_hw(wl->hw); |
| |
| return 0; |
| } |
| |
| |
| static struct spi_driver wl1271_spi_driver = { |
| .driver = { |
| .name = "wl1271", |
| .bus = &spi_bus_type, |
| .owner = THIS_MODULE, |
| }, |
| |
| .probe = wl1271_probe, |
| .remove = __devexit_p(wl1271_remove), |
| }; |
| |
| static int __init wl1271_init(void) |
| { |
| int ret; |
| |
| ret = spi_register_driver(&wl1271_spi_driver); |
| if (ret < 0) { |
| wl1271_error("failed to register spi driver: %d", ret); |
| goto out; |
| } |
| |
| out: |
| return ret; |
| } |
| |
| static void __exit wl1271_exit(void) |
| { |
| spi_unregister_driver(&wl1271_spi_driver); |
| |
| wl1271_notice("unloaded"); |
| } |
| |
| module_init(wl1271_init); |
| module_exit(wl1271_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Luciano Coelho <luciano.coelho@nokia.com>"); |
| MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>"); |