hwmon: (fschmd) Cleanups for watchdog support
Various small cleanups in preparation of adding watchdog support,
mostly removing _MASK postfix from defines which are not masks.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index 9671703..c188b71 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -1,6 +1,6 @@
/* fschmd.c
*
- * Copyright (C) 2007 Hans de Goede <j.w.r.degoede@hhs.nl>
+ * Copyright (C) 2007,2008 Hans de Goede <hdegoede@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -63,7 +63,7 @@
#define FSCHMD_REG_EVENT_STATE 0x04
#define FSCHMD_REG_CONTROL 0x05
-#define FSCHMD_CONTROL_ALERT_LED_MASK 0x01
+#define FSCHMD_CONTROL_ALERT_LED 0x01
/* watchdog (support to be implemented) */
#define FSCHMD_REG_WDOG_PRESET 0x28
@@ -115,8 +115,8 @@
static const int FSCHMD_NO_FAN_SENSORS[5] = { 3, 3, 6, 4, 5 };
/* Fan status register bitmasks */
-#define FSCHMD_FAN_ALARM_MASK 0x04 /* called fault by FSC! */
-#define FSCHMD_FAN_NOT_PRESENT_MASK 0x08 /* not documented */
+#define FSCHMD_FAN_ALARM 0x04 /* called fault by FSC! */
+#define FSCHMD_FAN_NOT_PRESENT 0x08 /* not documented */
/* actual temperature registers */
@@ -158,14 +158,11 @@
static const int FSCHMD_NO_TEMP_SENSORS[5] = { 3, 3, 4, 3, 5 };
/* temp status register bitmasks */
-#define FSCHMD_TEMP_WORKING_MASK 0x01
-#define FSCHMD_TEMP_ALERT_MASK 0x02
+#define FSCHMD_TEMP_WORKING 0x01
+#define FSCHMD_TEMP_ALERT 0x02
/* there only really is an alarm if the sensor is working and alert == 1 */
#define FSCHMD_TEMP_ALARM_MASK \
- (FSCHMD_TEMP_WORKING_MASK | FSCHMD_TEMP_ALERT_MASK)
-
-/* our driver name */
-#define FSCHMD_NAME "fschmd"
+ (FSCHMD_TEMP_WORKING | FSCHMD_TEMP_ALERT)
/*
* Functions declarations
@@ -195,7 +192,7 @@
static struct i2c_driver fschmd_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
- .name = FSCHMD_NAME,
+ .name = "fschmd",
},
.probe = fschmd_probe,
.remove = fschmd_remove,
@@ -300,7 +297,7 @@
struct fschmd_data *data = fschmd_update_device(dev);
/* bit 0 set means sensor working ok, so no fault! */
- if (data->temp_status[index] & FSCHMD_TEMP_WORKING_MASK)
+ if (data->temp_status[index] & FSCHMD_TEMP_WORKING)
return sprintf(buf, "0\n");
else
return sprintf(buf, "1\n");
@@ -385,7 +382,7 @@
int index = to_sensor_dev_attr(devattr)->index;
struct fschmd_data *data = fschmd_update_device(dev);
- if (data->fan_status[index] & FSCHMD_FAN_ALARM_MASK)
+ if (data->fan_status[index] & FSCHMD_FAN_ALARM)
return sprintf(buf, "1\n");
else
return sprintf(buf, "0\n");
@@ -397,7 +394,7 @@
int index = to_sensor_dev_attr(devattr)->index;
struct fschmd_data *data = fschmd_update_device(dev);
- if (data->fan_status[index] & FSCHMD_FAN_NOT_PRESENT_MASK)
+ if (data->fan_status[index] & FSCHMD_FAN_NOT_PRESENT)
return sprintf(buf, "1\n");
else
return sprintf(buf, "0\n");
@@ -449,7 +446,7 @@
{
struct fschmd_data *data = fschmd_update_device(dev);
- if (data->global_control & FSCHMD_CONTROL_ALERT_LED_MASK)
+ if (data->global_control & FSCHMD_CONTROL_ALERT_LED)
return sprintf(buf, "1\n");
else
return sprintf(buf, "0\n");
@@ -467,9 +464,9 @@
reg = i2c_smbus_read_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL);
if (v)
- reg |= FSCHMD_CONTROL_ALERT_LED_MASK;
+ reg |= FSCHMD_CONTROL_ALERT_LED;
else
- reg &= ~FSCHMD_CONTROL_ALERT_LED_MASK;
+ reg &= ~FSCHMD_CONTROL_ALERT_LED;
i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL, reg);
@@ -683,11 +680,11 @@
}
/* Read the special DMI table for fscher and newer chips */
- if (kind == fscher || kind >= fschrc) {
+ if ((kind == fscher || kind >= fschrc) && dmi_vref == -1) {
dmi_walk(fschmd_dmi_decode);
if (dmi_vref == -1) {
- printk(KERN_WARNING FSCHMD_NAME
- ": Couldn't get voltage scaling factors from "
+ dev_warn(&client->dev,
+ "Couldn't get voltage scaling factors from "
"BIOS DMI table, using builtin defaults\n");
dmi_vref = 33;
}
@@ -736,7 +733,7 @@
}
revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION);
- printk(KERN_INFO FSCHMD_NAME ": Detected FSC %s chip, revision: %d\n",
+ dev_info(&client->dev, "Detected FSC %s chip, revision: %d\n",
names[data->kind], (int) revision);
return 0;
@@ -798,7 +795,7 @@
data->temp_act[i] < data->temp_max[i])
i2c_smbus_write_byte_data(client,
FSCHMD_REG_TEMP_STATE[data->kind][i],
- FSCHMD_TEMP_ALERT_MASK);
+ FSCHMD_TEMP_ALERT);
}
for (i = 0; i < FSCHMD_NO_FAN_SENSORS[data->kind]; i++) {
@@ -816,11 +813,11 @@
FSCHMD_REG_FAN_MIN[data->kind][i]);
/* reset fan status if speed is back to > 0 */
- if ((data->fan_status[i] & FSCHMD_FAN_ALARM_MASK) &&
+ if ((data->fan_status[i] & FSCHMD_FAN_ALARM) &&
data->fan_act[i])
i2c_smbus_write_byte_data(client,
FSCHMD_REG_FAN_STATE[data->kind][i],
- FSCHMD_FAN_ALARM_MASK);
+ FSCHMD_FAN_ALARM);
}
for (i = 0; i < 3; i++)
@@ -857,7 +854,7 @@
i2c_del_driver(&fschmd_driver);
}
-MODULE_AUTHOR("Hans de Goede <j.w.r.degoede@hhs.nl>");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
MODULE_DESCRIPTION("FSC Poseidon, Hermes, Scylla, Heracles and "
"Heimdall driver");
MODULE_LICENSE("GPL");