| /* DVB USB compliant linux driver for mobile DVB-T USB devices based on |
| * reference designs made by DiBcom (http://www.dibcom.fr/) (DiB3000M-B) |
| * |
| * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) |
| * |
| * based on GPL code from DiBcom, which has |
| * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr) |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation, version 2. |
| * |
| * see Documentation/dvb/README.dvb-usb for more information |
| */ |
| #include "dibusb.h" |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| static int dib3000mb_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) |
| { |
| struct dvb_usb_adapter *adap = fe->dvb->priv; |
| struct dibusb_state *st = adap->priv; |
| |
| return st->ops.tuner_pass_ctrl(fe, enable, st->tuner_addr); |
| } |
| |
| static int dibusb_dib3000mb_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib3000_config demod_cfg; |
| struct dibusb_state *st = adap->priv; |
| |
| demod_cfg.demod_address = 0x8; |
| |
| if ((adap->fe_adap[0].fe = dvb_attach(dib3000mb_attach, &demod_cfg, |
| &adap->dev->i2c_adap, &st->ops)) == NULL) |
| return -ENODEV; |
| |
| adap->fe_adap[0].fe->ops.i2c_gate_ctrl = dib3000mb_i2c_gate_ctrl; |
| |
| return 0; |
| } |
| |
| static int dibusb_thomson_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dibusb_state *st = adap->priv; |
| |
| st->tuner_addr = 0x61; |
| |
| dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, &adap->dev->i2c_adap, |
| DVB_PLL_TUA6010XS); |
| return 0; |
| } |
| |
| static int dibusb_panasonic_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dibusb_state *st = adap->priv; |
| |
| st->tuner_addr = 0x60; |
| |
| dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap, |
| DVB_PLL_TDA665X); |
| return 0; |
| } |
| |
| /* Some of the Artec 1.1 device aren't equipped with the default tuner |
| * (Thomson Cable), but with a Panasonic ENV77H11D5. This function figures |
| * this out. */ |
| static int dibusb_tuner_probe_and_attach(struct dvb_usb_adapter *adap) |
| { |
| u8 b[2] = { 0,0 }, b2[1]; |
| int ret = 0; |
| struct i2c_msg msg[2] = { |
| { .flags = 0, .buf = b, .len = 2 }, |
| { .flags = I2C_M_RD, .buf = b2, .len = 1 }, |
| }; |
| struct dibusb_state *st = adap->priv; |
| |
| /* the Panasonic sits on I2C addrass 0x60, the Thomson on 0x61 */ |
| msg[0].addr = msg[1].addr = st->tuner_addr = 0x60; |
| |
| if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl) |
| adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 1); |
| |
| if (i2c_transfer(&adap->dev->i2c_adap, msg, 2) != 2) { |
| err("tuner i2c write failed."); |
| ret = -EREMOTEIO; |
| } |
| |
| if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl) |
| adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 0); |
| |
| if (b2[0] == 0xfe) { |
| info("This device has the Thomson Cable onboard. Which is default."); |
| ret = dibusb_thomson_tuner_attach(adap); |
| } else { |
| info("This device has the Panasonic ENV77H11D5 onboard."); |
| ret = dibusb_panasonic_tuner_attach(adap); |
| } |
| |
| return ret; |
| } |
| |
| /* USB Driver stuff */ |
| static struct dvb_usb_device_properties dibusb1_1_properties; |
| static struct dvb_usb_device_properties dibusb1_1_an2235_properties; |
| static struct dvb_usb_device_properties dibusb2_0b_properties; |
| static struct dvb_usb_device_properties artec_t1_usb2_properties; |
| |
| static int dibusb_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| if (0 == dvb_usb_device_init(intf, &dibusb1_1_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &dibusb1_1_an2235_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &dibusb2_0b_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &artec_t1_usb2_properties, |
| THIS_MODULE, NULL, adapter_nr)) |
| return 0; |
| |
| return -EINVAL; |
| } |
| |
| /* do not change the order of the ID table */ |
| static struct usb_device_id dibusb_dib3000mb_table [] = { |
| /* 00 */ { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_AVERMEDIA_DVBT_USB_COLD) }, |
| /* 01 */ { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_AVERMEDIA_DVBT_USB_WARM) }, |
| /* 02 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_COLD) }, |
| /* 03 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_WARM) }, |
| /* 04 */ { USB_DEVICE(USB_VID_COMPRO_UNK, USB_PID_COMPRO_DVBU2000_UNK_COLD) }, |
| /* 05 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_COLD) }, |
| /* 06 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_WARM) }, |
| /* 07 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_COLD) }, |
| /* 08 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_WARM) }, |
| /* 09 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_COLD) }, |
| /* 10 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_WARM) }, |
| /* 11 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_COLD) }, |
| /* 12 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_WARM) }, |
| /* 13 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_COLD) }, |
| /* 14 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_WARM) }, |
| /* 15 */ { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7041_COLD) }, |
| /* 16 */ { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7041_WARM) }, |
| /* 17 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_COLD) }, |
| /* 18 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_WARM) }, |
| /* 19 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_COLD) }, |
| /* 20 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_WARM) }, |
| /* 21 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_COLD) }, |
| /* 22 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_WARM) }, |
| /* 23 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_COLD) }, |
| |
| /* device ID with default DIBUSB2_0-firmware and with the hacked firmware */ |
| /* 24 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_WARM) }, |
| /* 25 */ { USB_DEVICE(USB_VID_KYE, USB_PID_KYE_DVB_T_COLD) }, |
| /* 26 */ { USB_DEVICE(USB_VID_KYE, USB_PID_KYE_DVB_T_WARM) }, |
| |
| /* 27 */ { USB_DEVICE(USB_VID_KWORLD, USB_PID_KWORLD_VSTREAM_COLD) }, |
| |
| /* 28 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_COLD) }, |
| /* 29 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_WARM) }, |
| |
| /* |
| * XXX: As Artec just 'forgot' to program the EEPROM on some Artec T1 devices |
| * we don't catch these faulty IDs (namely 'Cypress FX1 USB controller') that |
| * have been left on the device. If you don't have such a device but an Artec |
| * device that's supposed to work with this driver but is not detected by it, |
| * free to enable CONFIG_DVB_USB_DIBUSB_MB_FAULTY via your kernel config. |
| */ |
| |
| #ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY |
| /* 30 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) }, |
| #endif |
| |
| { } /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE (usb, dibusb_dib3000mb_table); |
| |
| static struct dvb_usb_device_properties dibusb1_1_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = CYPRESS_AN2135, |
| |
| .firmware = "dvb-usb-dibusb-5.0.0.11.fw", |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 16, |
| |
| .streaming_ctrl = dibusb_streaming_ctrl, |
| .pid_filter = dibusb_pid_filter, |
| .pid_filter_ctrl = dibusb_pid_filter_ctrl, |
| .frontend_attach = dibusb_dib3000mb_frontend_attach, |
| .tuner_attach = dibusb_tuner_probe_and_attach, |
| |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 7, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 4096, |
| } |
| } |
| }, |
| }}, |
| .size_of_priv = sizeof(struct dibusb_state), |
| } |
| }, |
| |
| .power_ctrl = dibusb_power_ctrl, |
| |
| .rc.legacy = { |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_map_table = rc_map_dibusb_table, |
| .rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ |
| .rc_query = dibusb_rc_query, |
| }, |
| |
| .i2c_algo = &dibusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .num_device_descs = 9, |
| .devices = { |
| { "AVerMedia AverTV DVBT USB1.1", |
| { &dibusb_dib3000mb_table[0], NULL }, |
| { &dibusb_dib3000mb_table[1], NULL }, |
| }, |
| { "Compro Videomate DVB-U2000 - DVB-T USB1.1 (please confirm to linux-dvb)", |
| { &dibusb_dib3000mb_table[2], &dibusb_dib3000mb_table[4], NULL}, |
| { &dibusb_dib3000mb_table[3], NULL }, |
| }, |
| { "DiBcom USB1.1 DVB-T reference design (MOD3000)", |
| { &dibusb_dib3000mb_table[5], NULL }, |
| { &dibusb_dib3000mb_table[6], NULL }, |
| }, |
| { "KWorld V-Stream XPERT DTV - DVB-T USB1.1", |
| { &dibusb_dib3000mb_table[7], NULL }, |
| { &dibusb_dib3000mb_table[8], NULL }, |
| }, |
| { "Grandtec USB1.1 DVB-T", |
| { &dibusb_dib3000mb_table[9], &dibusb_dib3000mb_table[11], NULL }, |
| { &dibusb_dib3000mb_table[10], &dibusb_dib3000mb_table[12], NULL }, |
| }, |
| { "Unknown USB1.1 DVB-T device ???? please report the name to the author", |
| { &dibusb_dib3000mb_table[13], NULL }, |
| { &dibusb_dib3000mb_table[14], NULL }, |
| }, |
| { "TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device", |
| { &dibusb_dib3000mb_table[15], &dibusb_dib3000mb_table[17], NULL}, |
| { &dibusb_dib3000mb_table[16], &dibusb_dib3000mb_table[18], NULL}, |
| }, |
| { "Artec T1 USB1.1 TVBOX with AN2135", |
| { &dibusb_dib3000mb_table[19], NULL }, |
| { &dibusb_dib3000mb_table[20], NULL }, |
| }, |
| { "VideoWalker DVB-T USB", |
| { &dibusb_dib3000mb_table[25], NULL }, |
| { &dibusb_dib3000mb_table[26], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties dibusb1_1_an2235_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| .usb_ctrl = CYPRESS_AN2235, |
| |
| .firmware = "dvb-usb-dibusb-an2235-01.fw", |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .caps = DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_ADAP_HAS_PID_FILTER, |
| .pid_filter_count = 16, |
| |
| .streaming_ctrl = dibusb_streaming_ctrl, |
| .pid_filter = dibusb_pid_filter, |
| .pid_filter_ctrl = dibusb_pid_filter_ctrl, |
| .frontend_attach = dibusb_dib3000mb_frontend_attach, |
| .tuner_attach = dibusb_tuner_probe_and_attach, |
| |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 7, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 4096, |
| } |
| } |
| }, |
| }}, |
| .size_of_priv = sizeof(struct dibusb_state), |
| }, |
| }, |
| .power_ctrl = dibusb_power_ctrl, |
| |
| .rc.legacy = { |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_map_table = rc_map_dibusb_table, |
| .rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ |
| .rc_query = dibusb_rc_query, |
| }, |
| |
| .i2c_algo = &dibusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| #ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY |
| .num_device_descs = 2, |
| #else |
| .num_device_descs = 1, |
| #endif |
| .devices = { |
| { "Artec T1 USB1.1 TVBOX with AN2235", |
| { &dibusb_dib3000mb_table[21], NULL }, |
| { &dibusb_dib3000mb_table[22], NULL }, |
| }, |
| #ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY |
| { "Artec T1 USB1.1 TVBOX with AN2235 (faulty USB IDs)", |
| { &dibusb_dib3000mb_table[30], NULL }, |
| { NULL }, |
| }, |
| { NULL }, |
| #endif |
| } |
| }; |
| |
| static struct dvb_usb_device_properties dibusb2_0b_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = CYPRESS_FX2, |
| |
| .firmware = "dvb-usb-adstech-usb2-02.fw", |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 16, |
| |
| .streaming_ctrl = dibusb2_0_streaming_ctrl, |
| .pid_filter = dibusb_pid_filter, |
| .pid_filter_ctrl = dibusb_pid_filter_ctrl, |
| .frontend_attach = dibusb_dib3000mb_frontend_attach, |
| .tuner_attach = dibusb_thomson_tuner_attach, |
| |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 7, |
| .endpoint = 0x06, |
| .u = { |
| .bulk = { |
| .buffersize = 4096, |
| } |
| } |
| }, |
| }}, |
| .size_of_priv = sizeof(struct dibusb_state), |
| } |
| }, |
| .power_ctrl = dibusb2_0_power_ctrl, |
| |
| .rc.legacy = { |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_map_table = rc_map_dibusb_table, |
| .rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ |
| .rc_query = dibusb_rc_query, |
| }, |
| |
| .i2c_algo = &dibusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .num_device_descs = 2, |
| .devices = { |
| { "KWorld/ADSTech Instant DVB-T USB2.0", |
| { &dibusb_dib3000mb_table[23], NULL }, |
| { &dibusb_dib3000mb_table[24], NULL }, |
| }, |
| { "KWorld Xpert DVB-T USB2.0", |
| { &dibusb_dib3000mb_table[27], NULL }, |
| { NULL } |
| }, |
| { NULL }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties artec_t1_usb2_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = CYPRESS_FX2, |
| |
| .firmware = "dvb-usb-dibusb-6.0.0.8.fw", |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, |
| .pid_filter_count = 16, |
| |
| .streaming_ctrl = dibusb2_0_streaming_ctrl, |
| .pid_filter = dibusb_pid_filter, |
| .pid_filter_ctrl = dibusb_pid_filter_ctrl, |
| .frontend_attach = dibusb_dib3000mb_frontend_attach, |
| .tuner_attach = dibusb_tuner_probe_and_attach, |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 7, |
| .endpoint = 0x06, |
| .u = { |
| .bulk = { |
| .buffersize = 4096, |
| } |
| } |
| }, |
| }}, |
| .size_of_priv = sizeof(struct dibusb_state), |
| } |
| }, |
| .power_ctrl = dibusb2_0_power_ctrl, |
| |
| .rc.legacy = { |
| .rc_interval = DEFAULT_RC_INTERVAL, |
| .rc_map_table = rc_map_dibusb_table, |
| .rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ |
| .rc_query = dibusb_rc_query, |
| }, |
| |
| .i2c_algo = &dibusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "Artec T1 USB2.0", |
| { &dibusb_dib3000mb_table[28], NULL }, |
| { &dibusb_dib3000mb_table[29], NULL }, |
| }, |
| { NULL }, |
| } |
| }; |
| |
| static struct usb_driver dibusb_driver = { |
| .name = "dvb_usb_dibusb_mb", |
| .probe = dibusb_probe, |
| .disconnect = dvb_usb_device_exit, |
| .id_table = dibusb_dib3000mb_table, |
| }; |
| |
| /* module stuff */ |
| static int __init dibusb_module_init(void) |
| { |
| int result; |
| if ((result = usb_register(&dibusb_driver))) { |
| err("usb_register failed. Error number %d",result); |
| return result; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit dibusb_module_exit(void) |
| { |
| /* deregister this driver from the USB subsystem */ |
| usb_deregister(&dibusb_driver); |
| } |
| |
| module_init (dibusb_module_init); |
| module_exit (dibusb_module_exit); |
| |
| MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); |
| MODULE_DESCRIPTION("Driver for DiBcom USB DVB-T devices (DiB3000M-B based)"); |
| MODULE_VERSION("1.0"); |
| MODULE_LICENSE("GPL"); |