| /* |
| * SDHCI support for CNS3xxx SoC |
| * |
| * Copyright 2008 Cavium Networks |
| * Copyright 2010 MontaVista Software, LLC. |
| * |
| * Authors: Scott Shu |
| * Anton Vorontsov <avorontsov@mvista.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/mmc/host.h> |
| #include <linux/module.h> |
| #include <mach/cns3xxx.h> |
| #include "sdhci-pltfm.h" |
| |
| static unsigned int sdhci_cns3xxx_get_max_clk(struct sdhci_host *host) |
| { |
| return 150000000; |
| } |
| |
| static void sdhci_cns3xxx_set_clock(struct sdhci_host *host, unsigned int clock) |
| { |
| struct device *dev = mmc_dev(host->mmc); |
| int div = 1; |
| u16 clk; |
| unsigned long timeout; |
| |
| if (clock == host->clock) |
| return; |
| |
| sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); |
| |
| if (clock == 0) |
| goto out; |
| |
| while (host->max_clk / div > clock) { |
| /* |
| * On CNS3xxx divider grows linearly up to 4, and then |
| * exponentially up to 256. |
| */ |
| if (div < 4) |
| div += 1; |
| else if (div < 256) |
| div *= 2; |
| else |
| break; |
| } |
| |
| dev_dbg(dev, "desired SD clock: %d, actual: %d\n", |
| clock, host->max_clk / div); |
| |
| /* Divide by 3 is special. */ |
| if (div != 3) |
| div >>= 1; |
| |
| clk = div << SDHCI_DIVIDER_SHIFT; |
| clk |= SDHCI_CLOCK_INT_EN; |
| sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); |
| |
| timeout = 20; |
| while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) |
| & SDHCI_CLOCK_INT_STABLE)) { |
| if (timeout == 0) { |
| dev_warn(dev, "clock is unstable"); |
| break; |
| } |
| timeout--; |
| mdelay(1); |
| } |
| |
| clk |= SDHCI_CLOCK_CARD_EN; |
| sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); |
| out: |
| host->clock = clock; |
| } |
| |
| static struct sdhci_ops sdhci_cns3xxx_ops = { |
| .get_max_clock = sdhci_cns3xxx_get_max_clk, |
| .set_clock = sdhci_cns3xxx_set_clock, |
| }; |
| |
| static struct sdhci_pltfm_data sdhci_cns3xxx_pdata = { |
| .ops = &sdhci_cns3xxx_ops, |
| .quirks = SDHCI_QUIRK_BROKEN_DMA | |
| SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | |
| SDHCI_QUIRK_INVERTED_WRITE_PROTECT | |
| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | |
| SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | |
| SDHCI_QUIRK_NONSTANDARD_CLOCK, |
| }; |
| |
| static int __devinit sdhci_cns3xxx_probe(struct platform_device *pdev) |
| { |
| return sdhci_pltfm_register(pdev, &sdhci_cns3xxx_pdata); |
| } |
| |
| static int __devexit sdhci_cns3xxx_remove(struct platform_device *pdev) |
| { |
| return sdhci_pltfm_unregister(pdev); |
| } |
| |
| static struct platform_driver sdhci_cns3xxx_driver = { |
| .driver = { |
| .name = "sdhci-cns3xxx", |
| .owner = THIS_MODULE, |
| }, |
| .probe = sdhci_cns3xxx_probe, |
| .remove = __devexit_p(sdhci_cns3xxx_remove), |
| #ifdef CONFIG_PM |
| .suspend = sdhci_pltfm_suspend, |
| .resume = sdhci_pltfm_resume, |
| #endif |
| }; |
| |
| static int __init sdhci_cns3xxx_init(void) |
| { |
| return platform_driver_register(&sdhci_cns3xxx_driver); |
| } |
| module_init(sdhci_cns3xxx_init); |
| |
| static void __exit sdhci_cns3xxx_exit(void) |
| { |
| platform_driver_unregister(&sdhci_cns3xxx_driver); |
| } |
| module_exit(sdhci_cns3xxx_exit); |
| |
| MODULE_DESCRIPTION("SDHCI driver for CNS3xxx"); |
| MODULE_AUTHOR("Scott Shu, " |
| "Anton Vorontsov <avorontsov@mvista.com>"); |
| MODULE_LICENSE("GPL v2"); |