wl1271: Add config structure for TX path parameters
Add a configuration structure for TX path parameters, and set defalt
configuration values there.
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h
index 8bf8bff..3c5ce31 100644
--- a/drivers/net/wireless/wl12xx/wl1271_conf.h
+++ b/drivers/net/wireless/wl12xx/wl1271_conf.h
@@ -255,9 +255,196 @@
u8 queue_type;
};
+#define CONF_TX_MAX_RATE_CLASSES 8
+
+#define CONF_TX_RATE_MASK_UNSPECIFIED 0
+#define CONF_TX_RATE_MASK_ALL 0x1eff
+#define CONF_TX_RATE_RETRY_LIMIT 10
+
+struct conf_tx_rate_class {
+
+ /*
+ * The rates enabled for this rate class.
+ *
+ * Range: CONF_HW_BIT_RATE_* bit mask
+ */
+ u32 enabled_rates;
+
+ /*
+ * The dot11 short retry limit used for TX retries.
+ *
+ * Range: u8
+ */
+ u8 short_retry_limit;
+
+ /*
+ * The dot11 long retry limit used for TX retries.
+ *
+ * Range: u8
+ */
+ u8 long_retry_limit;
+
+ /*
+ * Flags controlling the attributes of TX transmission.
+ *
+ * Range: bit 0: Truncate - when set, FW attempts to send a frame stop
+ * when the total valid per-rate attempts have
+ * been exhausted; otherwise transmissions
+ * will continue at the lowest available rate
+ * until the appropriate one of the
+ * short_retry_limit, long_retry_limit,
+ * dot11_max_transmit_msdu_life_time, or
+ * max_tx_life_time, is exhausted.
+ * 1: Preamble Override - indicates if the preamble type
+ * should be used in TX.
+ * 2: Preamble Type - the type of the preamble to be used by
+ * the policy (0 - long preamble, 1 - short preamble.
+ */
+ u8 aflags;
+};
+
+#define CONF_TX_MAX_AC_COUNT 4
+
+/* Slot number setting to start transmission at PIFS interval */
+#define CONF_TX_AIFS_PIFS 1
+/* Slot number setting to start transmission at DIFS interval normal
+ * DCF access */
+#define CONF_TX_AIFS_DIFS 2
+
+
+enum conf_tx_ac {
+ CONF_TX_AC_BE = 0, /* best effort / legacy */
+ CONF_TX_AC_BK = 1, /* background */
+ CONF_TX_AC_VI = 2, /* video */
+ CONF_TX_AC_VO = 3, /* voice */
+ CONF_TX_AC_CTS2SELF = 4, /* fictious AC, follows AC_VO */
+ CONF_TX_AC_ANY_TID = 0x1f
+};
+
+struct conf_tx_ac_category {
+ /*
+ * The AC class identifier.
+ *
+ * Range: enum conf_tx_ac
+ */
+ u8 ac;
+
+ /*
+ * The contention window minimum size (in slots) for the access
+ * class.
+ *
+ * Range: u8
+ */
+ u8 cw_min;
+
+ /*
+ * The contention window maximum size (in slots) for the access
+ * class.
+ *
+ * Range: u8
+ */
+ u16 cw_max;
+
+ /*
+ * The AIF value (in slots) for the access class.
+ *
+ * Range: u8
+ */
+ u8 aifsn;
+
+ /*
+ * The TX Op Limit (in microseconds) for the access class.
+ *
+ * Range: u16
+ */
+ u16 tx_op_limit;
+};
+
+#define CONF_TX_MAX_TID_COUNT 7
+
+enum {
+ CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/
+ CONF_CHANNEL_TYPE_EDCF = 1, /* EDCA*/
+ CONF_CHANNEL_TYPE_HCCA = 2, /* HCCA*/
+};
+
+enum {
+ CONF_PS_SCHEME_LEGACY = 0,
+ CONF_PS_SCHEME_UPSD_TRIGGER = 1,
+ CONF_PS_SCHEME_LEGACY_PSPOLL = 2,
+ CONF_PS_SCHEME_SAPSD = 3,
+};
+
+enum {
+ CONF_ACK_POLICY_LEGACY = 0,
+ CONF_ACK_POLICY_NO_ACK = 1,
+ CONF_ACK_POLICY_BLOCK = 2,
+};
+
+
+struct conf_tx_tid {
+ u8 queue_id;
+ u8 channel_type;
+ u8 tsid;
+ u8 ps_scheme;
+ u8 ack_policy;
+ u32 apsd_conf[2];
+};
+
+struct conf_tx_settings {
+ /*
+ * The TX ED value for TELEC Enable/Disable.
+ *
+ * Range: 0, 1
+ */
+ u8 tx_energy_detection;
+
+ /*
+ * Configuration for rate classes for TX (currently only one
+ * rate class supported.)
+ */
+ struct conf_tx_rate_class rc_conf;
+
+ /*
+ * Configuration for access categories for TX rate control.
+ */
+ u8 ac_conf_count;
+ struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT];
+
+ /*
+ * Configuration for TID parameters.
+ */
+ u8 tid_conf_count;
+ struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT];
+
+ /*
+ * The TX fragmentation threshold.
+ *
+ * Range: u16
+ */
+ u16 frag_threshold;
+
+ /*
+ * Max time in msec the FW may delay frame TX-Complete interrupt.
+ *
+ * Range: u16
+ */
+ u16 tx_compl_timeout;
+
+ /*
+ * Completed TX packet count which requires to issue the TX-Complete
+ * interrupt.
+ *
+ * Range: u16
+ */
+ u16 tx_compl_threshold;
+
+};
+
struct conf_drv_settings {
struct conf_sg_settings sg;
struct conf_rx_settings rx;
+ struct conf_tx_settings tx;
};
#endif