| /* |
| btaudio - bt878 audio dma driver for linux 2.4.x |
| |
| (c) 2000-2002 Gerd Knorr <kraxel@bytesex.org> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/errno.h> |
| #include <linux/pci.h> |
| #include <linux/sched.h> |
| #include <linux/signal.h> |
| #include <linux/types.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/poll.h> |
| #include <linux/sound.h> |
| #include <linux/soundcard.h> |
| #include <linux/slab.h> |
| #include <linux/kdev_t.h> |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| |
| |
| /* mmio access */ |
| #define btwrite(dat,adr) writel((dat), (bta->mmio+(adr))) |
| #define btread(adr) readl(bta->mmio+(adr)) |
| |
| #define btand(dat,adr) btwrite((dat) & btread(adr), adr) |
| #define btor(dat,adr) btwrite((dat) | btread(adr), adr) |
| #define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr) |
| |
| /* registers (shifted because bta->mmio is long) */ |
| #define REG_INT_STAT (0x100 >> 2) |
| #define REG_INT_MASK (0x104 >> 2) |
| #define REG_GPIO_DMA_CTL (0x10c >> 2) |
| #define REG_PACKET_LEN (0x110 >> 2) |
| #define REG_RISC_STRT_ADD (0x114 >> 2) |
| #define REG_RISC_COUNT (0x120 >> 2) |
| |
| /* IRQ bits - REG_INT_(STAT|MASK) */ |
| #define IRQ_SCERR (1 << 19) |
| #define IRQ_OCERR (1 << 18) |
| #define IRQ_PABORT (1 << 17) |
| #define IRQ_RIPERR (1 << 16) |
| #define IRQ_PPERR (1 << 15) |
| #define IRQ_FDSR (1 << 14) |
| #define IRQ_FTRGT (1 << 13) |
| #define IRQ_FBUS (1 << 12) |
| #define IRQ_RISCI (1 << 11) |
| #define IRQ_OFLOW (1 << 3) |
| |
| #define IRQ_BTAUDIO (IRQ_SCERR | IRQ_OCERR | IRQ_PABORT | IRQ_RIPERR |\ |
| IRQ_PPERR | IRQ_FDSR | IRQ_FTRGT | IRQ_FBUS |\ |
| IRQ_RISCI) |
| |
| /* REG_GPIO_DMA_CTL bits */ |
| #define DMA_CTL_A_PWRDN (1 << 26) |
| #define DMA_CTL_DA_SBR (1 << 14) |
| #define DMA_CTL_DA_ES2 (1 << 13) |
| #define DMA_CTL_ACAP_EN (1 << 4) |
| #define DMA_CTL_RISC_EN (1 << 1) |
| #define DMA_CTL_FIFO_EN (1 << 0) |
| |
| /* RISC instructions */ |
| #define RISC_WRITE (0x01 << 28) |
| #define RISC_JUMP (0x07 << 28) |
| #define RISC_SYNC (0x08 << 28) |
| |
| /* RISC bits */ |
| #define RISC_WR_SOL (1 << 27) |
| #define RISC_WR_EOL (1 << 26) |
| #define RISC_IRQ (1 << 24) |
| #define RISC_SYNC_RESYNC (1 << 15) |
| #define RISC_SYNC_FM1 0x06 |
| #define RISC_SYNC_VRO 0x0c |
| |
| #define HWBASE_AD (448000) |
| |
| /* -------------------------------------------------------------- */ |
| |
| struct btaudio { |
| /* linked list */ |
| struct btaudio *next; |
| |
| /* device info */ |
| int dsp_digital; |
| int dsp_analog; |
| int mixer_dev; |
| struct pci_dev *pci; |
| unsigned int irq; |
| unsigned long mem; |
| unsigned long __iomem *mmio; |
| |
| /* locking */ |
| int users; |
| struct semaphore lock; |
| |
| /* risc instructions */ |
| unsigned int risc_size; |
| unsigned long *risc_cpu; |
| dma_addr_t risc_dma; |
| |
| /* audio data */ |
| unsigned int buf_size; |
| unsigned char *buf_cpu; |
| dma_addr_t buf_dma; |
| |
| /* buffer setup */ |
| int line_bytes; |
| int line_count; |
| int block_bytes; |
| int block_count; |
| |
| /* read fifo management */ |
| int recording; |
| int dma_block; |
| int read_offset; |
| int read_count; |
| wait_queue_head_t readq; |
| |
| /* settings */ |
| int gain[3]; |
| int source; |
| int bits; |
| int decimation; |
| int mixcount; |
| int sampleshift; |
| int channels; |
| int analog; |
| int rate; |
| }; |
| |
| struct cardinfo { |
| char *name; |
| int rate; |
| }; |
| |
| static struct btaudio *btaudios; |
| static unsigned int debug; |
| static unsigned int irq_debug; |
| |
| /* -------------------------------------------------------------- */ |
| |
| #define BUF_DEFAULT 128*1024 |
| #define BUF_MIN 8192 |
| |
| static int alloc_buffer(struct btaudio *bta) |
| { |
| if (NULL == bta->buf_cpu) { |
| for (bta->buf_size = BUF_DEFAULT; bta->buf_size >= BUF_MIN; |
| bta->buf_size = bta->buf_size >> 1) { |
| bta->buf_cpu = pci_alloc_consistent |
| (bta->pci, bta->buf_size, &bta->buf_dma); |
| if (NULL != bta->buf_cpu) |
| break; |
| } |
| if (NULL == bta->buf_cpu) |
| return -ENOMEM; |
| memset(bta->buf_cpu,0,bta->buf_size); |
| } |
| if (NULL == bta->risc_cpu) { |
| bta->risc_size = PAGE_SIZE; |
| bta->risc_cpu = pci_alloc_consistent |
| (bta->pci, bta->risc_size, &bta->risc_dma); |
| if (NULL == bta->risc_cpu) { |
| pci_free_consistent(bta->pci, bta->buf_size, bta->buf_cpu, bta->buf_dma); |
| bta->buf_cpu = NULL; |
| return -ENOMEM; |
| } |
| } |
| return 0; |
| } |
| |
| static void free_buffer(struct btaudio *bta) |
| { |
| if (NULL != bta->buf_cpu) { |
| pci_free_consistent(bta->pci, bta->buf_size, |
| bta->buf_cpu, bta->buf_dma); |
| bta->buf_cpu = NULL; |
| } |
| if (NULL != bta->risc_cpu) { |
| pci_free_consistent(bta->pci, bta->risc_size, |
| bta->risc_cpu, bta->risc_dma); |
| bta->risc_cpu = NULL; |
| } |
| } |
| |
| static int make_risc(struct btaudio *bta) |
| { |
| int rp, bp, line, block; |
| unsigned long risc; |
| |
| bta->block_bytes = bta->buf_size >> 4; |
| bta->block_count = 1 << 4; |
| bta->line_bytes = bta->block_bytes; |
| bta->line_count = bta->block_count; |
| while (bta->line_bytes > 4095) { |
| bta->line_bytes >>= 1; |
| bta->line_count <<= 1; |
| } |
| if (bta->line_count > 255) |
| return -EINVAL; |
| if (debug) |
| printk(KERN_DEBUG |
| "btaudio: bufsize=%d - bs=%d bc=%d - ls=%d, lc=%d\n", |
| bta->buf_size,bta->block_bytes,bta->block_count, |
| bta->line_bytes,bta->line_count); |
| rp = 0; bp = 0; |
| block = 0; |
| bta->risc_cpu[rp++] = cpu_to_le32(RISC_SYNC|RISC_SYNC_FM1); |
| bta->risc_cpu[rp++] = cpu_to_le32(0); |
| for (line = 0; line < bta->line_count; line++) { |
| risc = RISC_WRITE | RISC_WR_SOL | RISC_WR_EOL; |
| risc |= bta->line_bytes; |
| if (0 == (bp & (bta->block_bytes-1))) { |
| risc |= RISC_IRQ; |
| risc |= (block & 0x0f) << 16; |
| risc |= (~block & 0x0f) << 20; |
| block++; |
| } |
| bta->risc_cpu[rp++] = cpu_to_le32(risc); |
| bta->risc_cpu[rp++] = cpu_to_le32(bta->buf_dma + bp); |
| bp += bta->line_bytes; |
| } |
| bta->risc_cpu[rp++] = cpu_to_le32(RISC_SYNC|RISC_SYNC_VRO); |
| bta->risc_cpu[rp++] = cpu_to_le32(0); |
| bta->risc_cpu[rp++] = cpu_to_le32(RISC_JUMP); |
| bta->risc_cpu[rp++] = cpu_to_le32(bta->risc_dma); |
| return 0; |
| } |
| |
| static int start_recording(struct btaudio *bta) |
| { |
| int ret; |
| |
| if (0 != (ret = alloc_buffer(bta))) |
| return ret; |
| if (0 != (ret = make_risc(bta))) |
| return ret; |
| |
| btwrite(bta->risc_dma, REG_RISC_STRT_ADD); |
| btwrite((bta->line_count << 16) | bta->line_bytes, |
| REG_PACKET_LEN); |
| btwrite(IRQ_BTAUDIO, REG_INT_MASK); |
| if (bta->analog) { |
| btwrite(DMA_CTL_ACAP_EN | |
| DMA_CTL_RISC_EN | |
| DMA_CTL_FIFO_EN | |
| DMA_CTL_DA_ES2 | |
| ((bta->bits == 8) ? DMA_CTL_DA_SBR : 0) | |
| (bta->gain[bta->source] << 28) | |
| (bta->source << 24) | |
| (bta->decimation << 8), |
| REG_GPIO_DMA_CTL); |
| } else { |
| btwrite(DMA_CTL_ACAP_EN | |
| DMA_CTL_RISC_EN | |
| DMA_CTL_FIFO_EN | |
| DMA_CTL_DA_ES2 | |
| DMA_CTL_A_PWRDN | |
| (1 << 6) | |
| ((bta->bits == 8) ? DMA_CTL_DA_SBR : 0) | |
| (bta->gain[bta->source] << 28) | |
| (bta->source << 24) | |
| (bta->decimation << 8), |
| REG_GPIO_DMA_CTL); |
| } |
| bta->dma_block = 0; |
| bta->read_offset = 0; |
| bta->read_count = 0; |
| bta->recording = 1; |
| if (debug) |
| printk(KERN_DEBUG "btaudio: recording started\n"); |
| return 0; |
| } |
| |
| static void stop_recording(struct btaudio *bta) |
| { |
| btand(~15, REG_GPIO_DMA_CTL); |
| bta->recording = 0; |
| if (debug) |
| printk(KERN_DEBUG "btaudio: recording stopped\n"); |
| } |
| |
| |
| /* -------------------------------------------------------------- */ |
| |
| static int btaudio_mixer_open(struct inode *inode, struct file *file) |
| { |
| int minor = iminor(inode); |
| struct btaudio *bta; |
| |
| for (bta = btaudios; bta != NULL; bta = bta->next) |
| if (bta->mixer_dev == minor) |
| break; |
| if (NULL == bta) |
| return -ENODEV; |
| |
| if (debug) |
| printk("btaudio: open mixer [%d]\n",minor); |
| file->private_data = bta; |
| return 0; |
| } |
| |
| static int btaudio_mixer_release(struct inode *inode, struct file *file) |
| { |
| return 0; |
| } |
| |
| static int btaudio_mixer_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| struct btaudio *bta = file->private_data; |
| int ret,val=0,i=0; |
| void __user *argp = (void __user *)arg; |
| |
| if (cmd == SOUND_MIXER_INFO) { |
| mixer_info info; |
| memset(&info,0,sizeof(info)); |
| strlcpy(info.id,"bt878",sizeof(info.id)); |
| strlcpy(info.name,"Brooktree Bt878 audio",sizeof(info.name)); |
| info.modify_counter = bta->mixcount; |
| if (copy_to_user(argp, &info, sizeof(info))) |
| return -EFAULT; |
| return 0; |
| } |
| if (cmd == SOUND_OLD_MIXER_INFO) { |
| _old_mixer_info info; |
| memset(&info,0,sizeof(info)); |
| strlcpy(info.id,"bt878",sizeof(info.id)-1); |
| strlcpy(info.name,"Brooktree Bt878 audio",sizeof(info.name)); |
| if (copy_to_user(argp, &info, sizeof(info))) |
| return -EFAULT; |
| return 0; |
| } |
| if (cmd == OSS_GETVERSION) |
| return put_user(SOUND_VERSION, (int __user *)argp); |
| |
| /* read */ |
| if (_SIOC_DIR(cmd) & _SIOC_WRITE) |
| if (get_user(val, (int __user *)argp)) |
| return -EFAULT; |
| |
| switch (cmd) { |
| case MIXER_READ(SOUND_MIXER_CAPS): |
| ret = SOUND_CAP_EXCL_INPUT; |
| break; |
| case MIXER_READ(SOUND_MIXER_STEREODEVS): |
| ret = 0; |
| break; |
| case MIXER_READ(SOUND_MIXER_RECMASK): |
| case MIXER_READ(SOUND_MIXER_DEVMASK): |
| ret = SOUND_MASK_LINE1|SOUND_MASK_LINE2|SOUND_MASK_LINE3; |
| break; |
| |
| case MIXER_WRITE(SOUND_MIXER_RECSRC): |
| if (val & SOUND_MASK_LINE1 && bta->source != 0) |
| bta->source = 0; |
| else if (val & SOUND_MASK_LINE2 && bta->source != 1) |
| bta->source = 1; |
| else if (val & SOUND_MASK_LINE3 && bta->source != 2) |
| bta->source = 2; |
| btaor((bta->gain[bta->source] << 28) | |
| (bta->source << 24), |
| 0x0cffffff, REG_GPIO_DMA_CTL); |
| case MIXER_READ(SOUND_MIXER_RECSRC): |
| switch (bta->source) { |
| case 0: ret = SOUND_MASK_LINE1; break; |
| case 1: ret = SOUND_MASK_LINE2; break; |
| case 2: ret = SOUND_MASK_LINE3; break; |
| default: ret = 0; |
| } |
| break; |
| |
| case MIXER_WRITE(SOUND_MIXER_LINE1): |
| case MIXER_WRITE(SOUND_MIXER_LINE2): |
| case MIXER_WRITE(SOUND_MIXER_LINE3): |
| if (MIXER_WRITE(SOUND_MIXER_LINE1) == cmd) |
| i = 0; |
| if (MIXER_WRITE(SOUND_MIXER_LINE2) == cmd) |
| i = 1; |
| if (MIXER_WRITE(SOUND_MIXER_LINE3) == cmd) |
| i = 2; |
| bta->gain[i] = (val & 0xff) * 15 / 100; |
| if (bta->gain[i] > 15) bta->gain[i] = 15; |
| if (bta->gain[i] < 0) bta->gain[i] = 0; |
| if (i == bta->source) |
| btaor((bta->gain[bta->source]<<28), |
| 0x0fffffff, REG_GPIO_DMA_CTL); |
| ret = bta->gain[i] * 100 / 15; |
| ret |= ret << 8; |
| break; |
| |
| case MIXER_READ(SOUND_MIXER_LINE1): |
| case MIXER_READ(SOUND_MIXER_LINE2): |
| case MIXER_READ(SOUND_MIXER_LINE3): |
| if (MIXER_READ(SOUND_MIXER_LINE1) == cmd) |
| i = 0; |
| if (MIXER_READ(SOUND_MIXER_LINE2) == cmd) |
| i = 1; |
| if (MIXER_READ(SOUND_MIXER_LINE3) == cmd) |
| i = 2; |
| ret = bta->gain[i] * 100 / 15; |
| ret |= ret << 8; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| if (put_user(ret, (int __user *)argp)) |
| return -EFAULT; |
| return 0; |
| } |
| |
| static struct file_operations btaudio_mixer_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .open = btaudio_mixer_open, |
| .release = btaudio_mixer_release, |
| .ioctl = btaudio_mixer_ioctl, |
| }; |
| |
| /* -------------------------------------------------------------- */ |
| |
| static int btaudio_dsp_open(struct inode *inode, struct file *file, |
| struct btaudio *bta, int analog) |
| { |
| down(&bta->lock); |
| if (bta->users) |
| goto busy; |
| bta->users++; |
| file->private_data = bta; |
| |
| bta->analog = analog; |
| bta->dma_block = 0; |
| bta->read_offset = 0; |
| bta->read_count = 0; |
| bta->sampleshift = 0; |
| |
| up(&bta->lock); |
| return 0; |
| |
| busy: |
| up(&bta->lock); |
| return -EBUSY; |
| } |
| |
| static int btaudio_dsp_open_digital(struct inode *inode, struct file *file) |
| { |
| int minor = iminor(inode); |
| struct btaudio *bta; |
| |
| for (bta = btaudios; bta != NULL; bta = bta->next) |
| if (bta->dsp_digital == minor) |
| break; |
| if (NULL == bta) |
| return -ENODEV; |
| |
| if (debug) |
| printk("btaudio: open digital dsp [%d]\n",minor); |
| return btaudio_dsp_open(inode,file,bta,0); |
| } |
| |
| static int btaudio_dsp_open_analog(struct inode *inode, struct file *file) |
| { |
| int minor = iminor(inode); |
| struct btaudio *bta; |
| |
| for (bta = btaudios; bta != NULL; bta = bta->next) |
| if (bta->dsp_analog == minor) |
| break; |
| if (NULL == bta) |
| return -ENODEV; |
| |
| if (debug) |
| printk("btaudio: open analog dsp [%d]\n",minor); |
| return btaudio_dsp_open(inode,file,bta,1); |
| } |
| |
| static int btaudio_dsp_release(struct inode *inode, struct file *file) |
| { |
| struct btaudio *bta = file->private_data; |
| |
| down(&bta->lock); |
| if (bta->recording) |
| stop_recording(bta); |
| bta->users--; |
| up(&bta->lock); |
| return 0; |
| } |
| |
| static ssize_t btaudio_dsp_read(struct file *file, char __user *buffer, |
| size_t swcount, loff_t *ppos) |
| { |
| struct btaudio *bta = file->private_data; |
| int hwcount = swcount << bta->sampleshift; |
| int nsrc, ndst, err, ret = 0; |
| DECLARE_WAITQUEUE(wait, current); |
| |
| add_wait_queue(&bta->readq, &wait); |
| down(&bta->lock); |
| while (swcount > 0) { |
| if (0 == bta->read_count) { |
| if (!bta->recording) { |
| if (0 != (err = start_recording(bta))) { |
| if (0 == ret) |
| ret = err; |
| break; |
| } |
| } |
| if (file->f_flags & O_NONBLOCK) { |
| if (0 == ret) |
| ret = -EAGAIN; |
| break; |
| } |
| up(&bta->lock); |
| current->state = TASK_INTERRUPTIBLE; |
| schedule(); |
| down(&bta->lock); |
| if(signal_pending(current)) { |
| if (0 == ret) |
| ret = -EINTR; |
| break; |
| } |
| } |
| nsrc = (bta->read_count < hwcount) ? bta->read_count : hwcount; |
| if (nsrc > bta->buf_size - bta->read_offset) |
| nsrc = bta->buf_size - bta->read_offset; |
| ndst = nsrc >> bta->sampleshift; |
| |
| if ((bta->analog && 0 == bta->sampleshift) || |
| (!bta->analog && 2 == bta->channels)) { |
| /* just copy */ |
| if (copy_to_user(buffer + ret, bta->buf_cpu + bta->read_offset, nsrc)) { |
| if (0 == ret) |
| ret = -EFAULT; |
| break; |
| } |
| |
| } else if (!bta->analog) { |
| /* stereo => mono (digital audio) */ |
| __s16 *src = (__s16*)(bta->buf_cpu + bta->read_offset); |
| __s16 __user *dst = (__s16 __user *)(buffer + ret); |
| __s16 avg; |
| int n = ndst>>1; |
| if (!access_ok(VERIFY_WRITE, dst, ndst)) { |
| if (0 == ret) |
| ret = -EFAULT; |
| break; |
| } |
| for (; n; n--, dst++) { |
| avg = (__s16)le16_to_cpu(*src) / 2; src++; |
| avg += (__s16)le16_to_cpu(*src) / 2; src++; |
| __put_user(cpu_to_le16(avg),dst); |
| } |
| |
| } else if (8 == bta->bits) { |
| /* copy + byte downsampling (audio A/D) */ |
| __u8 *src = bta->buf_cpu + bta->read_offset; |
| __u8 __user *dst = buffer + ret; |
| int n = ndst; |
| if (!access_ok(VERIFY_WRITE, dst, ndst)) { |
| if (0 == ret) |
| ret = -EFAULT; |
| break; |
| } |
| for (; n; n--, src += (1 << bta->sampleshift), dst++) |
| __put_user(*src, dst); |
| |
| } else { |
| /* copy + word downsampling (audio A/D) */ |
| __u16 *src = (__u16*)(bta->buf_cpu + bta->read_offset); |
| __u16 __user *dst = (__u16 __user *)(buffer + ret); |
| int n = ndst>>1; |
| if (!access_ok(VERIFY_WRITE,dst,ndst)) { |
| if (0 == ret) |
| ret = -EFAULT; |
| break; |
| } |
| for (; n; n--, src += (1 << bta->sampleshift), dst++) |
| __put_user(*src, dst); |
| } |
| |
| ret += ndst; |
| swcount -= ndst; |
| hwcount -= nsrc; |
| bta->read_count -= nsrc; |
| bta->read_offset += nsrc; |
| if (bta->read_offset == bta->buf_size) |
| bta->read_offset = 0; |
| } |
| up(&bta->lock); |
| remove_wait_queue(&bta->readq, &wait); |
| current->state = TASK_RUNNING; |
| return ret; |
| } |
| |
| static ssize_t btaudio_dsp_write(struct file *file, const char __user *buffer, |
| size_t count, loff_t *ppos) |
| { |
| return -EINVAL; |
| } |
| |
| static int btaudio_dsp_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| struct btaudio *bta = file->private_data; |
| int s, i, ret, val = 0; |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| |
| switch (cmd) { |
| case OSS_GETVERSION: |
| return put_user(SOUND_VERSION, p); |
| case SNDCTL_DSP_GETCAPS: |
| return 0; |
| |
| case SNDCTL_DSP_SPEED: |
| if (get_user(val, p)) |
| return -EFAULT; |
| if (bta->analog) { |
| for (s = 0; s < 16; s++) |
| if (val << s >= HWBASE_AD*4/15) |
| break; |
| for (i = 15; i >= 5; i--) |
| if (val << s <= HWBASE_AD*4/i) |
| break; |
| bta->sampleshift = s; |
| bta->decimation = i; |
| if (debug) |
| printk(KERN_DEBUG "btaudio: rate: req=%d " |
| "dec=%d shift=%d hwrate=%d swrate=%d\n", |
| val,i,s,(HWBASE_AD*4/i),(HWBASE_AD*4/i)>>s); |
| } else { |
| bta->sampleshift = (bta->channels == 2) ? 0 : 1; |
| bta->decimation = 0; |
| } |
| if (bta->recording) { |
| down(&bta->lock); |
| stop_recording(bta); |
| start_recording(bta); |
| up(&bta->lock); |
| } |
| /* fall through */ |
| case SOUND_PCM_READ_RATE: |
| if (bta->analog) { |
| return put_user(HWBASE_AD*4/bta->decimation>>bta->sampleshift, p); |
| } else { |
| return put_user(bta->rate, p); |
| } |
| |
| case SNDCTL_DSP_STEREO: |
| if (!bta->analog) { |
| if (get_user(val, p)) |
| return -EFAULT; |
| bta->channels = (val > 0) ? 2 : 1; |
| bta->sampleshift = (bta->channels == 2) ? 0 : 1; |
| if (debug) |
| printk(KERN_INFO |
| "btaudio: stereo=%d channels=%d\n", |
| val,bta->channels); |
| } else { |
| if (val == 1) |
| return -EFAULT; |
| else { |
| bta->channels = 1; |
| if (debug) |
| printk(KERN_INFO |
| "btaudio: stereo=0 channels=1\n"); |
| } |
| } |
| return put_user((bta->channels)-1, p); |
| |
| case SNDCTL_DSP_CHANNELS: |
| if (!bta->analog) { |
| if (get_user(val, p)) |
| return -EFAULT; |
| bta->channels = (val > 1) ? 2 : 1; |
| bta->sampleshift = (bta->channels == 2) ? 0 : 1; |
| if (debug) |
| printk(KERN_DEBUG |
| "btaudio: val=%d channels=%d\n", |
| val,bta->channels); |
| } |
| /* fall through */ |
| case SOUND_PCM_READ_CHANNELS: |
| return put_user(bta->channels, p); |
| |
| case SNDCTL_DSP_GETFMTS: /* Returns a mask */ |
| if (bta->analog) |
| return put_user(AFMT_S16_LE|AFMT_S8, p); |
| else |
| return put_user(AFMT_S16_LE, p); |
| |
| case SNDCTL_DSP_SETFMT: /* Selects ONE fmt*/ |
| if (get_user(val, p)) |
| return -EFAULT; |
| if (val != AFMT_QUERY) { |
| if (bta->analog) |
| bta->bits = (val == AFMT_S8) ? 8 : 16; |
| else |
| bta->bits = 16; |
| if (bta->recording) { |
| down(&bta->lock); |
| stop_recording(bta); |
| start_recording(bta); |
| up(&bta->lock); |
| } |
| } |
| if (debug) |
| printk(KERN_DEBUG "btaudio: fmt: bits=%d\n",bta->bits); |
| return put_user((bta->bits==16) ? AFMT_S16_LE : AFMT_S8, |
| p); |
| break; |
| case SOUND_PCM_READ_BITS: |
| return put_user(bta->bits, p); |
| |
| case SNDCTL_DSP_NONBLOCK: |
| file->f_flags |= O_NONBLOCK; |
| return 0; |
| |
| case SNDCTL_DSP_RESET: |
| if (bta->recording) { |
| down(&bta->lock); |
| stop_recording(bta); |
| up(&bta->lock); |
| } |
| return 0; |
| case SNDCTL_DSP_GETBLKSIZE: |
| if (!bta->recording) { |
| if (0 != (ret = alloc_buffer(bta))) |
| return ret; |
| if (0 != (ret = make_risc(bta))) |
| return ret; |
| } |
| return put_user(bta->block_bytes>>bta->sampleshift,p); |
| |
| case SNDCTL_DSP_SYNC: |
| /* NOP */ |
| return 0; |
| case SNDCTL_DSP_GETISPACE: |
| { |
| audio_buf_info info; |
| if (!bta->recording) |
| return -EINVAL; |
| info.fragsize = bta->block_bytes>>bta->sampleshift; |
| info.fragstotal = bta->block_count; |
| info.bytes = bta->read_count; |
| info.fragments = info.bytes / info.fragsize; |
| if (debug) |
| printk(KERN_DEBUG "btaudio: SNDCTL_DSP_GETISPACE " |
| "returns %d/%d/%d/%d\n", |
| info.fragsize, info.fragstotal, |
| info.bytes, info.fragments); |
| if (copy_to_user(argp, &info, sizeof(info))) |
| return -EFAULT; |
| return 0; |
| } |
| #if 0 /* TODO */ |
| case SNDCTL_DSP_GETTRIGGER: |
| case SNDCTL_DSP_SETTRIGGER: |
| case SNDCTL_DSP_SETFRAGMENT: |
| #endif |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static unsigned int btaudio_dsp_poll(struct file *file, struct poll_table_struct *wait) |
| { |
| struct btaudio *bta = file->private_data; |
| unsigned int mask = 0; |
| |
| poll_wait(file, &bta->readq, wait); |
| |
| if (0 != bta->read_count) |
| mask |= (POLLIN | POLLRDNORM); |
| |
| return mask; |
| } |
| |
| static struct file_operations btaudio_digital_dsp_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .open = btaudio_dsp_open_digital, |
| .release = btaudio_dsp_release, |
| .read = btaudio_dsp_read, |
| .write = btaudio_dsp_write, |
| .ioctl = btaudio_dsp_ioctl, |
| .poll = btaudio_dsp_poll, |
| }; |
| |
| static struct file_operations btaudio_analog_dsp_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .open = btaudio_dsp_open_analog, |
| .release = btaudio_dsp_release, |
| .read = btaudio_dsp_read, |
| .write = btaudio_dsp_write, |
| .ioctl = btaudio_dsp_ioctl, |
| .poll = btaudio_dsp_poll, |
| }; |
| |
| /* -------------------------------------------------------------- */ |
| |
| static char *irq_name[] = { "", "", "", "OFLOW", "", "", "", "", "", "", "", |
| "RISCI", "FBUS", "FTRGT", "FDSR", "PPERR", |
| "RIPERR", "PABORT", "OCERR", "SCERR" }; |
| |
| static irqreturn_t btaudio_irq(int irq, void *dev_id, struct pt_regs * regs) |
| { |
| int count = 0; |
| u32 stat,astat; |
| struct btaudio *bta = dev_id; |
| int handled = 0; |
| |
| for (;;) { |
| count++; |
| stat = btread(REG_INT_STAT); |
| astat = stat & btread(REG_INT_MASK); |
| if (!astat) |
| return IRQ_RETVAL(handled); |
| handled = 1; |
| btwrite(astat,REG_INT_STAT); |
| |
| if (irq_debug) { |
| int i; |
| printk(KERN_DEBUG "btaudio: irq loop=%d risc=%x, bits:", |
| count, stat>>28); |
| for (i = 0; i < (sizeof(irq_name)/sizeof(char*)); i++) { |
| if (stat & (1 << i)) |
| printk(" %s",irq_name[i]); |
| if (astat & (1 << i)) |
| printk("*"); |
| } |
| printk("\n"); |
| } |
| if (stat & IRQ_RISCI) { |
| int blocks; |
| blocks = (stat >> 28) - bta->dma_block; |
| if (blocks < 0) |
| blocks += bta->block_count; |
| bta->dma_block = stat >> 28; |
| if (bta->read_count + 2*bta->block_bytes > bta->buf_size) { |
| stop_recording(bta); |
| printk(KERN_INFO "btaudio: buffer overrun\n"); |
| } |
| if (blocks > 0) { |
| bta->read_count += blocks * bta->block_bytes; |
| wake_up_interruptible(&bta->readq); |
| } |
| } |
| if (count > 10) { |
| printk(KERN_WARNING |
| "btaudio: Oops - irq mask cleared\n"); |
| btwrite(0, REG_INT_MASK); |
| } |
| } |
| return IRQ_NONE; |
| } |
| |
| /* -------------------------------------------------------------- */ |
| |
| static unsigned int dsp1 = -1; |
| static unsigned int dsp2 = -1; |
| static unsigned int mixer = -1; |
| static int latency = -1; |
| static int digital = 1; |
| static int analog = 1; |
| static int rate; |
| |
| #define BTA_OSPREY200 1 |
| |
| static struct cardinfo cards[] = { |
| [0] = { |
| .name = "default", |
| .rate = 32000, |
| }, |
| [BTA_OSPREY200] = { |
| .name = "Osprey 200", |
| .rate = 44100, |
| }, |
| }; |
| |
| static int __devinit btaudio_probe(struct pci_dev *pci_dev, |
| const struct pci_device_id *pci_id) |
| { |
| struct btaudio *bta; |
| struct cardinfo *card = &cards[pci_id->driver_data]; |
| unsigned char revision,lat; |
| int rc = -EBUSY; |
| |
| if (pci_enable_device(pci_dev)) |
| return -EIO; |
| if (!request_mem_region(pci_resource_start(pci_dev,0), |
| pci_resource_len(pci_dev,0), |
| "btaudio")) { |
| return -EBUSY; |
| } |
| |
| bta = kmalloc(sizeof(*bta),GFP_ATOMIC); |
| if (!bta) { |
| rc = -ENOMEM; |
| goto fail0; |
| } |
| memset(bta,0,sizeof(*bta)); |
| |
| bta->pci = pci_dev; |
| bta->irq = pci_dev->irq; |
| bta->mem = pci_resource_start(pci_dev,0); |
| bta->mmio = ioremap(pci_resource_start(pci_dev,0), |
| pci_resource_len(pci_dev,0)); |
| |
| bta->source = 1; |
| bta->bits = 8; |
| bta->channels = 1; |
| if (bta->analog) { |
| bta->decimation = 15; |
| } else { |
| bta->decimation = 0; |
| bta->sampleshift = 1; |
| } |
| |
| /* sample rate */ |
| bta->rate = card->rate; |
| if (rate) |
| bta->rate = rate; |
| |
| init_MUTEX(&bta->lock); |
| init_waitqueue_head(&bta->readq); |
| |
| if (-1 != latency) { |
| printk(KERN_INFO "btaudio: setting pci latency timer to %d\n", |
| latency); |
| pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, latency); |
| } |
| pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &revision); |
| pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &lat); |
| printk(KERN_INFO "btaudio: Bt%x (rev %d) at %02x:%02x.%x, ", |
| pci_dev->device,revision,pci_dev->bus->number, |
| PCI_SLOT(pci_dev->devfn),PCI_FUNC(pci_dev->devfn)); |
| printk("irq: %d, latency: %d, mmio: 0x%lx\n", |
| bta->irq, lat, bta->mem); |
| printk("btaudio: using card config \"%s\"\n", card->name); |
| |
| /* init hw */ |
| btwrite(0, REG_GPIO_DMA_CTL); |
| btwrite(0, REG_INT_MASK); |
| btwrite(~0U, REG_INT_STAT); |
| pci_set_master(pci_dev); |
| |
| if ((rc = request_irq(bta->irq, btaudio_irq, SA_SHIRQ|SA_INTERRUPT, |
| "btaudio",(void *)bta)) < 0) { |
| printk(KERN_WARNING |
| "btaudio: can't request irq (rc=%d)\n",rc); |
| goto fail1; |
| } |
| |
| /* register devices */ |
| if (digital) { |
| rc = bta->dsp_digital = |
| register_sound_dsp(&btaudio_digital_dsp_fops,dsp1); |
| if (rc < 0) { |
| printk(KERN_WARNING |
| "btaudio: can't register digital dsp (rc=%d)\n",rc); |
| goto fail2; |
| } |
| printk(KERN_INFO "btaudio: registered device dsp%d [digital]\n", |
| bta->dsp_digital >> 4); |
| } |
| if (analog) { |
| rc = bta->dsp_analog = |
| register_sound_dsp(&btaudio_analog_dsp_fops,dsp2); |
| if (rc < 0) { |
| printk(KERN_WARNING |
| "btaudio: can't register analog dsp (rc=%d)\n",rc); |
| goto fail3; |
| } |
| printk(KERN_INFO "btaudio: registered device dsp%d [analog]\n", |
| bta->dsp_analog >> 4); |
| rc = bta->mixer_dev = register_sound_mixer(&btaudio_mixer_fops,mixer); |
| if (rc < 0) { |
| printk(KERN_WARNING |
| "btaudio: can't register mixer (rc=%d)\n",rc); |
| goto fail4; |
| } |
| printk(KERN_INFO "btaudio: registered device mixer%d\n", |
| bta->mixer_dev >> 4); |
| } |
| |
| /* hook into linked list */ |
| bta->next = btaudios; |
| btaudios = bta; |
| |
| pci_set_drvdata(pci_dev,bta); |
| return 0; |
| |
| fail4: |
| unregister_sound_dsp(bta->dsp_analog); |
| fail3: |
| if (digital) |
| unregister_sound_dsp(bta->dsp_digital); |
| fail2: |
| free_irq(bta->irq,bta); |
| fail1: |
| kfree(bta); |
| fail0: |
| release_mem_region(pci_resource_start(pci_dev,0), |
| pci_resource_len(pci_dev,0)); |
| return rc; |
| } |
| |
| static void __devexit btaudio_remove(struct pci_dev *pci_dev) |
| { |
| struct btaudio *bta = pci_get_drvdata(pci_dev); |
| struct btaudio *walk; |
| |
| /* turn off all DMA / IRQs */ |
| btand(~15, REG_GPIO_DMA_CTL); |
| btwrite(0, REG_INT_MASK); |
| btwrite(~0U, REG_INT_STAT); |
| |
| /* unregister devices */ |
| if (digital) { |
| unregister_sound_dsp(bta->dsp_digital); |
| } |
| if (analog) { |
| unregister_sound_dsp(bta->dsp_analog); |
| unregister_sound_mixer(bta->mixer_dev); |
| } |
| |
| /* free resources */ |
| free_buffer(bta); |
| free_irq(bta->irq,bta); |
| release_mem_region(pci_resource_start(pci_dev,0), |
| pci_resource_len(pci_dev,0)); |
| |
| /* remove from linked list */ |
| if (bta == btaudios) { |
| btaudios = NULL; |
| } else { |
| for (walk = btaudios; walk->next != bta; walk = walk->next) |
| ; /* if (NULL == walk->next) BUG(); */ |
| walk->next = bta->next; |
| } |
| |
| pci_set_drvdata(pci_dev, NULL); |
| kfree(bta); |
| return; |
| } |
| |
| /* -------------------------------------------------------------- */ |
| |
| static struct pci_device_id btaudio_pci_tbl[] = { |
| { |
| .vendor = PCI_VENDOR_ID_BROOKTREE, |
| .device = 0x0878, |
| .subvendor = 0x0070, |
| .subdevice = 0xff01, |
| .driver_data = BTA_OSPREY200, |
| },{ |
| .vendor = PCI_VENDOR_ID_BROOKTREE, |
| .device = 0x0878, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| },{ |
| .vendor = PCI_VENDOR_ID_BROOKTREE, |
| .device = 0x0878, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| },{ |
| /* --- end of list --- */ |
| } |
| }; |
| |
| static struct pci_driver btaudio_pci_driver = { |
| .name = "btaudio", |
| .id_table = btaudio_pci_tbl, |
| .probe = btaudio_probe, |
| .remove = __devexit_p(btaudio_remove), |
| }; |
| |
| static int btaudio_init_module(void) |
| { |
| printk(KERN_INFO "btaudio: driver version 0.7 loaded [%s%s%s]\n", |
| digital ? "digital" : "", |
| analog && digital ? "+" : "", |
| analog ? "analog" : ""); |
| return pci_register_driver(&btaudio_pci_driver); |
| } |
| |
| static void btaudio_cleanup_module(void) |
| { |
| pci_unregister_driver(&btaudio_pci_driver); |
| return; |
| } |
| |
| module_init(btaudio_init_module); |
| module_exit(btaudio_cleanup_module); |
| |
| module_param(dsp1, int, S_IRUGO); |
| module_param(dsp2, int, S_IRUGO); |
| module_param(mixer, int, S_IRUGO); |
| module_param(debug, int, S_IRUGO | S_IWUSR); |
| module_param(irq_debug, int, S_IRUGO | S_IWUSR); |
| module_param(digital, int, S_IRUGO); |
| module_param(analog, int, S_IRUGO); |
| module_param(rate, int, S_IRUGO); |
| module_param(latency, int, S_IRUGO); |
| MODULE_PARM_DESC(latency,"pci latency timer"); |
| |
| MODULE_DEVICE_TABLE(pci, btaudio_pci_tbl); |
| MODULE_DESCRIPTION("bt878 audio dma driver"); |
| MODULE_AUTHOR("Gerd Knorr"); |
| MODULE_LICENSE("GPL"); |
| |
| /* |
| * Local variables: |
| * c-basic-offset: 8 |
| * End: |
| */ |