Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6:
[XFS] fix unaligned access in readdir
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e5b447a..c417877 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -883,6 +883,14 @@
lapic_timer_c2_ok [X86-32,x86-64,APIC] trust the local apic timer in
C2 power state.
+ libata.dma= [LIBATA] DMA control
+ libata.dma=0 Disable all PATA and SATA DMA
+ libata.dma=1 PATA and SATA Disk DMA only
+ libata.dma=2 ATAPI (CDROM) DMA only
+ libata.dma=4 Compact Flash DMA only
+ Combinations also work, so libata.dma=3 enables DMA
+ for disks and CDROMs, but not CFs.
+
libata.noacpi [LIBATA] Disables use of ACPI in libata suspend/resume
when set.
Format: <int>
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 7f6ddcb..f8a535a 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -269,7 +269,7 @@
static void __init bootmem_init(void)
{
- unsigned long init_begin, reserved_end;
+ unsigned long reserved_end;
unsigned long mapstart = ~0UL;
unsigned long bootmap_size;
int i;
@@ -344,7 +344,6 @@
min_low_pfn, max_low_pfn);
- init_begin = PFN_UP(__pa_symbol(&__init_begin));
for (i = 0; i < boot_mem_map.nr_map; i++) {
unsigned long start, end;
@@ -352,8 +351,8 @@
end = PFN_DOWN(boot_mem_map.map[i].addr
+ boot_mem_map.map[i].size);
- if (start <= init_begin)
- start = init_begin;
+ if (start <= min_low_pfn)
+ start = min_low_pfn;
if (start >= end)
continue;
diff --git a/arch/mips/lasat/image/Makefile b/arch/mips/lasat/image/Makefile
index 5332449..460626b 100644
--- a/arch/mips/lasat/image/Makefile
+++ b/arch/mips/lasat/image/Makefile
@@ -12,11 +12,11 @@
MKLASATIMG = mklasatimg
MKLASATIMG_ARCH = mq2,mqpro,sp100,sp200
-KERNEL_IMAGE = $(TOPDIR)/vmlinux
+KERNEL_IMAGE = vmlinux
KERNEL_START = $(shell $(NM) $(KERNEL_IMAGE) | grep " _text" | cut -f1 -d\ )
KERNEL_ENTRY = $(shell $(NM) $(KERNEL_IMAGE) | grep kernel_entry | cut -f1 -d\ )
-LDSCRIPT= -L$(obj) -Tromscript.normal
+LDSCRIPT= -L$(srctree)/$(src) -Tromscript.normal
HEAD_DEFINES := -D_kernel_start=0x$(KERNEL_START) \
-D_kernel_entry=0x$(KERNEL_ENTRY) \
@@ -24,7 +24,7 @@
-D TIMESTAMP=$(shell date +%s)
$(obj)/head.o: $(obj)/head.S $(KERNEL_IMAGE)
- $(CC) -fno-pic $(HEAD_DEFINES) -I$(TOPDIR)/include -c -o $@ $<
+ $(CC) -fno-pic $(HEAD_DEFINES) $(LINUXINCLUDE) -c -o $@ $<
OBJECTS = head.o kImage.o
diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c
index 2c5c27c8..dc272c1 100644
--- a/arch/mips/mips-boards/generic/memory.c
+++ b/arch/mips/mips-boards/generic/memory.c
@@ -169,7 +169,6 @@
void __init prom_free_prom_memory(void)
{
-#if 0 /* for now ... */
unsigned long addr;
int i;
@@ -181,5 +180,4 @@
free_init_pages("prom memory",
addr, addr + boot_mem_map.map[i].size);
}
-#endif
}
diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c
index 7a1bb51..583d468 100644
--- a/arch/mips/mips-boards/generic/reset.c
+++ b/arch/mips/mips-boards/generic/reset.c
@@ -39,16 +39,18 @@
static void mips_machine_restart(char *command)
{
- unsigned int __iomem *softres_reg = ioremap(SOFTRES_REG, sizeof(unsigned int));
+ unsigned int __iomem *softres_reg =
+ ioremap(SOFTRES_REG, sizeof(unsigned int));
- writew(GORESET, softres_reg);
+ __raw_writel(GORESET, softres_reg);
}
static void mips_machine_halt(void)
{
- unsigned int __iomem *softres_reg = ioremap(SOFTRES_REG, sizeof(unsigned int));
+ unsigned int __iomem *softres_reg =
+ ioremap(SOFTRES_REG, sizeof(unsigned int));
- writew(GORESET, softres_reg);
+ __raw_writel(GORESET, softres_reg);
}
#if defined(CONFIG_MIPS_ATLAS)
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index ae76795..810535d 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -45,7 +45,7 @@
/* ignore region specifiers */
gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
-#ifdef CONFIG_ZONE_DMA32
+#ifdef CONFIG_ZONE_DMA
if (dev == NULL)
gfp |= __GFP_DMA;
else if (dev->coherent_dma_mask < DMA_BIT_MASK(24))
diff --git a/arch/mips/philips/pnx8550/common/time.c b/arch/mips/philips/pnx8550/common/time.c
index e818fd0..6d494e0 100644
--- a/arch/mips/philips/pnx8550/common/time.c
+++ b/arch/mips/philips/pnx8550/common/time.c
@@ -22,7 +22,6 @@
#include <linux/kernel_stat.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
-#include <linux/module.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
@@ -41,11 +40,60 @@
return read_c0_count2();
}
+static struct clocksource pnx_clocksource = {
+ .name = "pnx8xxx",
+ .rating = 200,
+ .read = hpt_read,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
static void timer_ack(void)
{
write_c0_compare(cpj);
}
+static irqreturn_t pnx8xxx_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *c = dev_id;
+
+ /* clear MATCH, signal the event */
+ c->event_handler(c);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction pnx8xxx_timer_irq = {
+ .handler = pnx8xxx_timer_interrupt,
+ .flags = IRQF_DISABLED | IRQF_PERCPU,
+ .name = "pnx8xxx_timer",
+};
+
+static irqreturn_t monotonic_interrupt(int irq, void *dev_id)
+{
+ /* Timer 2 clear interrupt */
+ write_c0_compare2(-1);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction monotonic_irqaction = {
+ .handler = monotonic_interrupt,
+ .flags = IRQF_DISABLED,
+ .name = "Monotonic timer",
+};
+
+static int pnx8xxx_set_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ write_c0_compare(delta);
+ return 0;
+}
+
+static struct clock_event_device pnx8xxx_clockevent = {
+ .name = "pnx8xxx_clockevent",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = pnx8xxx_set_next_event,
+};
+
/*
* plat_time_init() - it does the following things:
*
@@ -58,11 +106,34 @@
__init void plat_time_init(void)
{
+ unsigned int configPR;
unsigned int n;
unsigned int m;
unsigned int p;
unsigned int pow2p;
+ clockevents_register_device(&pnx8xxx_clockevent);
+ clocksource_register(&pnx_clocksource);
+
+ setup_irq(PNX8550_INT_TIMER1, &pnx8xxx_timer_irq);
+ setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction);
+
+ /* Timer 1 start */
+ configPR = read_c0_config7();
+ configPR &= ~0x00000008;
+ write_c0_config7(configPR);
+
+ /* Timer 2 start */
+ configPR = read_c0_config7();
+ configPR &= ~0x00000010;
+ write_c0_config7(configPR);
+
+ /* Timer 3 stop */
+ configPR = read_c0_config7();
+ configPR |= 0x00000020;
+ write_c0_config7(configPR);
+
+
/* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */
/* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1: FIXME) */
@@ -87,42 +158,6 @@
write_c0_count2(0);
write_c0_compare2(0xffffffff);
- clocksource_mips.read = hpt_read;
- mips_timer_ack = timer_ack;
}
-static irqreturn_t monotonic_interrupt(int irq, void *dev_id)
-{
- /* Timer 2 clear interrupt */
- write_c0_compare2(-1);
- return IRQ_HANDLED;
-}
-static struct irqaction monotonic_irqaction = {
- .handler = monotonic_interrupt,
- .flags = IRQF_DISABLED,
- .name = "Monotonic timer",
-};
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
- int configPR;
-
- setup_irq(PNX8550_INT_TIMER1, irq);
- setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction);
-
- /* Timer 1 start */
- configPR = read_c0_config7();
- configPR &= ~0x00000008;
- write_c0_config7(configPR);
-
- /* Timer 2 start */
- configPR = read_c0_config7();
- configPR &= ~0x00000010;
- write_c0_config7(configPR);
-
- /* Timer 3 stop */
- configPR = read_c0_config7();
- configPR |= 0x00000020;
- write_c0_config7(configPR);
-}
diff --git a/block/blktrace.c b/block/blktrace.c
index 498a0a5..9b4da4a 100644
--- a/block/blktrace.c
+++ b/block/blktrace.c
@@ -25,7 +25,6 @@
#include <linux/time.h>
#include <asm/uaccess.h>
-static DEFINE_PER_CPU(unsigned long long, blk_trace_cpu_offset) = { 0, };
static unsigned int blktrace_seq __read_mostly = 1;
/*
@@ -41,7 +40,7 @@
const int cpu = smp_processor_id();
t->magic = BLK_IO_TRACE_MAGIC | BLK_IO_TRACE_VERSION;
- t->time = cpu_clock(cpu) - per_cpu(blk_trace_cpu_offset, cpu);
+ t->time = ktime_to_ns(ktime_get());
t->device = bt->dev;
t->action = action;
t->pid = pid;
@@ -159,7 +158,7 @@
t->magic = BLK_IO_TRACE_MAGIC | BLK_IO_TRACE_VERSION;
t->sequence = ++(*sequence);
- t->time = cpu_clock(cpu) - per_cpu(blk_trace_cpu_offset, cpu);
+ t->time = ktime_to_ns(ktime_get());
t->sector = sector;
t->bytes = bytes;
t->action = what;
@@ -179,7 +178,7 @@
EXPORT_SYMBOL_GPL(__blk_add_trace);
static struct dentry *blk_tree_root;
-static struct mutex blk_tree_mutex;
+static DEFINE_MUTEX(blk_tree_mutex);
static unsigned int root_users;
static inline void blk_remove_root(void)
@@ -505,77 +504,3 @@
blk_trace_remove(q);
}
}
-
-/*
- * Average offset over two calls to cpu_clock() with a gettimeofday()
- * in the middle
- */
-static void blk_check_time(unsigned long long *t, int this_cpu)
-{
- unsigned long long a, b;
- struct timeval tv;
-
- a = cpu_clock(this_cpu);
- do_gettimeofday(&tv);
- b = cpu_clock(this_cpu);
-
- *t = tv.tv_sec * 1000000000 + tv.tv_usec * 1000;
- *t -= (a + b) / 2;
-}
-
-/*
- * calibrate our inter-CPU timings
- */
-static void blk_trace_check_cpu_time(void *data)
-{
- unsigned long long *t;
- int this_cpu = get_cpu();
-
- t = &per_cpu(blk_trace_cpu_offset, this_cpu);
-
- /*
- * Just call it twice, hopefully the second call will be cache hot
- * and a little more precise
- */
- blk_check_time(t, this_cpu);
- blk_check_time(t, this_cpu);
-
- put_cpu();
-}
-
-static void blk_trace_set_ht_offsets(void)
-{
-#if defined(CONFIG_SCHED_SMT)
- int cpu, i;
-
- /*
- * now make sure HT siblings have the same time offset
- */
- preempt_disable();
- for_each_online_cpu(cpu) {
- unsigned long long *cpu_off, *sibling_off;
-
- for_each_cpu_mask(i, per_cpu(cpu_sibling_map, cpu)) {
- if (i == cpu)
- continue;
-
- cpu_off = &per_cpu(blk_trace_cpu_offset, cpu);
- sibling_off = &per_cpu(blk_trace_cpu_offset, i);
- *sibling_off = *cpu_off;
- }
- }
- preempt_enable();
-#endif
-}
-
-static __init int blk_trace_init(void)
-{
- mutex_init(&blk_tree_mutex);
- on_each_cpu(blk_trace_check_cpu_time, NULL, 1, 1);
- blk_trace_set_ht_offsets();
-
- return 0;
-}
-
-module_init(blk_trace_init);
-
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index f0124a8..21a81cd 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1733,11 +1733,15 @@
ehc->i.action &= ~ATA_EH_PERDEV_MASK;
}
- /* consider speeding down */
+ /* propagate timeout to host link */
+ if ((all_err_mask & AC_ERR_TIMEOUT) && !ata_is_host_link(link))
+ ap->link.eh_context.i.err_mask |= AC_ERR_TIMEOUT;
+
+ /* record error and consider speeding down */
dev = ehc->i.dev;
- if (!dev && ata_link_max_devices(link) == 1 &&
- ata_dev_enabled(link->device))
- dev = link->device;
+ if (!dev && ((ata_link_max_devices(link) == 1 &&
+ ata_dev_enabled(link->device))))
+ dev = link->device;
if (dev)
ehc->i.action |= ata_eh_speed_down(dev, is_io, all_err_mask);
@@ -1759,8 +1763,14 @@
{
struct ata_link *link;
- __ata_port_for_each_link(link, ap)
+ ata_port_for_each_link(link, ap)
ata_eh_link_autopsy(link);
+
+ /* Autopsy of fanout ports can affect host link autopsy.
+ * Perform host link autopsy last.
+ */
+ if (ap->nr_pmp_links)
+ ata_eh_link_autopsy(&ap->link);
}
/**
@@ -2157,13 +2167,11 @@
if (ata_link_offline(link))
continue;
- /* apply class override and convert UNKNOWN to NONE */
+ /* apply class override */
if (lflags & ATA_LFLAG_ASSUME_ATA)
classes[dev->devno] = ATA_DEV_ATA;
else if (lflags & ATA_LFLAG_ASSUME_SEMB)
classes[dev->devno] = ATA_DEV_SEMB_UNSUP; /* not yet */
- else if (classes[dev->devno] == ATA_DEV_UNKNOWN)
- classes[dev->devno] = ATA_DEV_NONE;
}
/* record current link speed */
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index c0c4dbc..caef2bb 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -495,14 +495,12 @@
/* SError.N need a kick in the ass to get working */
link->flags |= ATA_LFLAG_HRST_TO_RESUME;
- /* class code report is unreliable */
- if (link->pmp < 5)
- link->flags |= ATA_LFLAG_ASSUME_ATA;
-
- /* The config device, which can be either at
- * port 0 or 5, locks up on SRST.
+ /* Class code report is unreliable and SRST
+ * times out under certain configurations.
+ * Config device can be at port 0 or 5 and
+ * locks up on SRST.
*/
- if (link->pmp == 0 || link->pmp == 5)
+ if (link->pmp <= 5)
link->flags |= ATA_LFLAG_NO_SRST |
ATA_LFLAG_ASSUME_ATA;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a883bb0..264ae60 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -872,7 +872,8 @@
ata_scsi_sdev_config(sdev);
- sdev->manage_start_stop = 1;
+ if (dev->class == ATA_DEV_ATA)
+ sdev->manage_start_stop = 1;
if (dev)
ata_scsi_dev_config(sdev, dev);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 48acc09..b7ac80b 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -806,7 +806,10 @@
if (rc)
goto err_out;
- if (!legacy_mode) {
+ if (!legacy_mode && pdev->irq) {
+ /* We may have no IRQ assigned in which case we can poll. This
+ shouldn't happen on a sane system but robustness is cheap
+ in this case */
rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler,
IRQF_SHARED, DRV_NAME, host);
if (rc)
@@ -814,7 +817,7 @@
ata_port_desc(host->ports[0], "irq %d", pdev->irq);
ata_port_desc(host->ports[1], "irq %d", pdev->irq);
- } else {
+ } else if (legacy_mode) {
if (!ata_port_is_dummy(host->ports[0])) {
rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev),
pi->port_ops->irq_handler,
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index fcd532a..120b5bf 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -130,10 +130,11 @@
.port_start = ata_port_start,
};
-static void ixp4xx_setup_port(struct ata_ioports *ioaddr,
+static void ixp4xx_setup_port(struct ata_port *ap,
struct ixp4xx_pata_data *data,
unsigned long raw_cs0, unsigned long raw_cs1)
{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned long raw_cmd = raw_cs0;
unsigned long raw_ctl = raw_cs1 + 0x06;
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index bc7c2d5..8f28156 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -215,8 +215,8 @@
/* Flip back to 33Mhz for PIO */
if (adev->dma_mode >= XFER_UDMA_2)
iowrite8(ioread8(clock) & ~sel66, clock);
-
ata_bmdma_stop(qc);
+ pdc202xx_set_piomode(ap, adev);
}
/**
@@ -233,6 +233,17 @@
adev->max_sectors = 256;
}
+static int pdc2026x_port_start(struct ata_port *ap)
+{
+ void __iomem *bmdma = ap->ioaddr.bmdma_addr;
+ if (bmdma) {
+ /* Enable burst mode */
+ u8 burst = ioread8(bmdma + 0x1f);
+ iowrite8(burst | 0x01, bmdma + 0x1f);
+ }
+ return ata_sff_port_start(ap);
+}
+
static struct scsi_host_template pdc202xx_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
@@ -313,7 +324,7 @@
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_sff_port_start,
+ .port_start = pdc2026x_port_start,
};
static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 2f1de6e..c68b241 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -270,7 +270,7 @@
static void qs_error_handler(struct ata_port *ap)
{
qs_enter_reg_mode(ap);
- ata_do_eh(ap, qs_prereset, ata_std_softreset, NULL,
+ ata_do_eh(ap, qs_prereset, NULL, sata_std_hardreset,
ata_std_postreset);
}
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 96fd526..b4c674d 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -832,16 +832,31 @@
struct ata_link *link = qc->dev->link;
struct ata_port *ap = link->ap;
u8 prot = qc->tf.protocol;
- int is_atapi = (prot == ATA_PROT_ATAPI ||
- prot == ATA_PROT_ATAPI_NODATA ||
- prot == ATA_PROT_ATAPI_DMA);
- /* ATAPI commands completing with CHECK_SENSE cause various
- * weird problems if other commands are active. PMP DMA CS
- * errata doesn't cover all and HSM violation occurs even with
- * only one other device active. Always run an ATAPI command
- * by itself.
- */
+ /*
+ * There is a bug in the chip:
+ * Port LRAM Causes the PRB/SGT Data to be Corrupted
+ * If the host issues a read request for LRAM and SActive registers
+ * while active commands are available in the port, PRB/SGT data in
+ * the LRAM can become corrupted. This issue applies only when
+ * reading from, but not writing to, the LRAM.
+ *
+ * Therefore, reading LRAM when there is no particular error [and
+ * other commands may be outstanding] is prohibited.
+ *
+ * To avoid this bug there are two situations where a command must run
+ * exclusive of any other commands on the port:
+ *
+ * - ATAPI commands which check the sense data
+ * - Passthrough ATA commands which always have ATA_QCFLAG_RESULT_TF
+ * set.
+ *
+ */
+ int is_excl = (prot == ATA_PROT_ATAPI ||
+ prot == ATA_PROT_ATAPI_NODATA ||
+ prot == ATA_PROT_ATAPI_DMA ||
+ (qc->flags & ATA_QCFLAG_RESULT_TF));
+
if (unlikely(ap->excl_link)) {
if (link == ap->excl_link) {
if (ap->nr_active_links)
@@ -849,7 +864,7 @@
qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
} else
return ATA_DEFER_PORT;
- } else if (unlikely(is_atapi)) {
+ } else if (unlikely(is_excl)) {
ap->excl_link = link;
if (ap->nr_active_links)
return ATA_DEFER_PORT;
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 56e23042..b8af22e 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -610,7 +610,7 @@
static int loop_switch(struct loop_device *lo, struct file *file)
{
struct switch_request w;
- struct bio *bio = bio_alloc(GFP_KERNEL, 1);
+ struct bio *bio = bio_alloc(GFP_KERNEL, 0);
if (!bio)
return -ENOMEM;
init_completion(&w.wait);
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index a337b69..5f7e718 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -429,8 +429,8 @@
static void aes_crypt_copy(const u8 *in, u8 *out, u32 *key, struct cword *cword)
{
- u8 tmp[AES_BLOCK_SIZE * 2]
- __attribute__ ((__aligned__(PADLOCK_ALIGNMENT)));
+ u8 buf[AES_BLOCK_SIZE * 2 + PADLOCK_ALIGNMENT - 1];
+ u8 *tmp = PTR_ALIGN(&buf[0], PADLOCK_ALIGNMENT);
memcpy(tmp, in, AES_BLOCK_SIZE);
padlock_xcrypt(tmp, out, key, cword);
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index 89df48f..899d565 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -16,6 +16,7 @@
#include <acpi/acpi.h>
#include <linux/ide.h>
#include <linux/pci.h>
+#include <linux/dmi.h>
#include <acpi/acpi_bus.h>
#include <acpi/acnames.h>
@@ -65,6 +66,39 @@
extern int ide_noacpitfs;
extern int ide_noacpionboot;
+static bool ide_noacpi_psx;
+static int no_acpi_psx(const struct dmi_system_id *id)
+{
+ ide_noacpi_psx = true;
+ printk(KERN_NOTICE"%s detected - disable ACPI _PSx.\n", id->ident);
+ return 0;
+}
+
+static const struct dmi_system_id ide_acpi_dmi_table[] = {
+ /* Bug 9673. */
+ /* We should check if this is because ACPI NVS isn't save/restored. */
+ {
+ .callback = no_acpi_psx,
+ .ident = "HP nx9005",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies Ltd."),
+ DMI_MATCH(DMI_BIOS_VERSION, "KAM1.60")
+ },
+ },
+
+ { } /* terminate list */
+};
+
+static int ide_acpi_blacklist(void)
+{
+ static int done;
+ if (done)
+ return 0;
+ done = 1;
+ dmi_check_system(ide_acpi_dmi_table);
+ return 0;
+}
+
/**
* ide_get_dev_handle - finds acpi_handle and PCI device.function
* @dev: device to locate
@@ -623,7 +657,7 @@
{
int unit;
- if (ide_noacpi)
+ if (ide_noacpi || ide_noacpi_psx)
return;
DEBPRINT("ENTER:\n");
@@ -668,6 +702,8 @@
struct ide_acpi_drive_link *master;
struct ide_acpi_drive_link *slave;
+ ide_acpi_blacklist();
+
hwif->acpidata = kzalloc(sizeof(struct ide_acpi_hwif_link), GFP_KERNEL);
if (!hwif->acpidata)
return;
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index cef405d..bb9693d 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -612,12 +612,12 @@
printk(KERN_DEBUG "%s: skipping word 93 validity check\n",
drive->name);
+ if (ide_dev_is_sata(id) && !ivb)
+ return 1;
+
if (hwif->cbl != ATA_CBL_PATA80 && !ivb)
goto no_80w;
- if (ide_dev_is_sata(id))
- return 1;
-
/*
* FIXME:
* - force bit13 (80c cable present) check also for !ivb devices
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c
index 0895e75..0151d7f 100644
--- a/drivers/ide/pci/trm290.c
+++ b/drivers/ide/pci/trm290.c
@@ -1,7 +1,8 @@
/*
- * linux/drivers/ide/pci/trm290.c Version 1.02 Mar. 18, 2000
+ * linux/drivers/ide/pci/trm290.c Version 1.05 Dec. 26, 2007
*
* Copyright (c) 1997-1998 Mark Lord
+ * Copyright (c) 2007 MontaVista Software, Inc. <source@mvista.com>
* May be copied or modified under the terms of the GNU General Public License
*
* June 22, 2004 - get rid of check_region
@@ -177,7 +178,7 @@
trm290_prepare_drive(drive, drive->using_dma);
}
-static void trm290_ide_dma_exec_cmd(ide_drive_t *drive, u8 command)
+static void trm290_dma_exec_cmd(ide_drive_t *drive, u8 command)
{
BUG_ON(HWGROUP(drive)->handler != NULL); /* paranoia check */
ide_set_handler(drive, &ide_dma_intr, WAIT_CMD, NULL);
@@ -185,7 +186,7 @@
outb(command, IDE_COMMAND_REG);
}
-static int trm290_ide_dma_setup(ide_drive_t *drive)
+static int trm290_dma_setup(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
struct request *rq = hwif->hwgroup->rq;
@@ -215,7 +216,7 @@
return 0;
}
-static void trm290_ide_dma_start(ide_drive_t *drive)
+static void trm290_dma_start(ide_drive_t *drive)
{
}
@@ -240,6 +241,14 @@
return (status == 0x00ff);
}
+static void trm290_dma_host_on(ide_drive_t *drive)
+{
+}
+
+static void trm290_dma_host_off(ide_drive_t *drive)
+{
+}
+
static void __devinit init_hwif_trm290(ide_hwif_t *hwif)
{
unsigned int cfgbase = 0;
@@ -280,11 +289,13 @@
ide_setup_dma(hwif, (hwif->config_data + 4) ^ (hwif->channel ? 0x0080 : 0x0000), 3);
- hwif->dma_setup = &trm290_ide_dma_setup;
- hwif->dma_exec_cmd = &trm290_ide_dma_exec_cmd;
- hwif->dma_start = &trm290_ide_dma_start;
- hwif->ide_dma_end = &trm290_ide_dma_end;
- hwif->ide_dma_test_irq = &trm290_ide_dma_test_irq;
+ hwif->dma_host_off = &trm290_dma_host_off;
+ hwif->dma_host_on = &trm290_dma_host_on;
+ hwif->dma_setup = &trm290_dma_setup;
+ hwif->dma_exec_cmd = &trm290_dma_exec_cmd;
+ hwif->dma_start = &trm290_dma_start;
+ hwif->ide_dma_end = &trm290_ide_dma_end;
+ hwif->ide_dma_test_irq = &trm290_ide_dma_test_irq;
hwif->selectproc = &trm290_selectproc;
#if 1
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index a9eb1c5..1707f98 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -1504,9 +1504,12 @@
int ret, wbufsize, word_gap, words;
const struct kvec *vec;
unsigned long vec_seek;
+ unsigned long initial_adr;
+ int initial_len = len;
wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
adr += chip->start;
+ initial_adr = adr;
cmd_adr = adr & ~(wbufsize-1);
/* Let's determine this according to the interleave only once */
@@ -1519,7 +1522,7 @@
return ret;
}
- XIP_INVAL_CACHED_RANGE(map, adr, len);
+ XIP_INVAL_CACHED_RANGE(map, initial_adr, initial_len);
ENABLE_VPP(map);
xip_disable(map, chip, cmd_adr);
@@ -1610,7 +1613,7 @@
chip->state = FL_WRITING;
ret = INVAL_CACHE_AND_WAIT(map, chip, cmd_adr,
- adr, len,
+ initial_adr, initial_len,
chip->buffer_write_time);
if (ret) {
map_write(map, CMD(0x70), cmd_adr);
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 146d540..2886407 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -3041,7 +3041,6 @@
int cnt;
int req_cnt;
int seg_cnt;
- dma_addr_t dma_handle;
u8 dir;
ENTER("qla1280_32bit_start_scsi");
@@ -3050,6 +3049,7 @@
cmd->cmnd[0]);
/* Calculate number of entries and segments required. */
+ req_cnt = 1;
seg_cnt = scsi_dma_map(cmd);
if (seg_cnt) {
/*
diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c
index b312890..044a423 100644
--- a/drivers/video/ps3fb.c
+++ b/drivers/video/ps3fb.c
@@ -443,8 +443,6 @@
u32 ddr_line_length, xdr_line_length;
u64 ddr_base, xdr_base;
- acquire_console_sem();
-
if (frame > par->num_frames - 1) {
dev_dbg(info->device, "%s: invalid frame number (%u)\n",
__func__, frame);
@@ -464,7 +462,6 @@
xdr_line_length);
out:
- release_console_sem();
return error;
}
@@ -479,7 +476,10 @@
if (atomic_dec_and_test(&ps3fb.f_count)) {
if (atomic_read(&ps3fb.ext_flip)) {
atomic_set(&ps3fb.ext_flip, 0);
- ps3fb_sync(info, 0); /* single buffer */
+ if (!try_acquire_console_sem()) {
+ ps3fb_sync(info, 0); /* single buffer */
+ release_console_sem();
+ }
}
}
return 0;
@@ -865,7 +865,9 @@
break;
dev_dbg(info->device, "PS3FB_IOCTL_FSEL:%d\n", val);
+ acquire_console_sem();
retval = ps3fb_sync(info, val);
+ release_console_sem();
break;
default:
@@ -885,7 +887,9 @@
set_current_state(TASK_INTERRUPTIBLE);
if (ps3fb.is_kicked) {
ps3fb.is_kicked = 0;
+ acquire_console_sem();
ps3fb_sync(info, 0); /* single buffer */
+ release_console_sem();
}
schedule();
}
@@ -1234,12 +1238,6 @@
ps3fb_flip_ctl(0, &ps3fb); /* flip off */
ps3fb.dinfo->irq.mask = 0;
- if (info) {
- unregister_framebuffer(info);
- fb_dealloc_cmap(&info->cmap);
- framebuffer_release(info);
- }
-
ps3av_register_flip_ctl(NULL, NULL);
if (ps3fb.task) {
struct task_struct *task = ps3fb.task;
@@ -1250,6 +1248,12 @@
free_irq(ps3fb.irq_no, &dev->core);
ps3_irq_plug_destroy(ps3fb.irq_no);
}
+ if (info) {
+ unregister_framebuffer(info);
+ fb_dealloc_cmap(&info->cmap);
+ framebuffer_release(info);
+ info = dev->core.driver_data = NULL;
+ }
iounmap((u8 __iomem *)ps3fb.dinfo);
status = lv1_gpu_context_free(ps3fb.context_handle);
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index b35069a..bd1b9d6 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -115,6 +115,7 @@
#define NFS_LOCK_INITIALIZED 1
int ls_flags;
struct nfs_seqid_counter ls_seqid;
+ struct rpc_sequence ls_sequence;
struct nfs_unique_id ls_id;
nfs4_stateid ls_stateid;
atomic_t ls_count;
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index 23a9a36..5a39c6f 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -509,7 +509,10 @@
lsp = kzalloc(sizeof(*lsp), GFP_KERNEL);
if (lsp == NULL)
return NULL;
- lsp->ls_seqid.sequence = &state->owner->so_sequence;
+ rpc_init_wait_queue(&lsp->ls_sequence.wait, "lock_seqid_waitqueue");
+ spin_lock_init(&lsp->ls_sequence.lock);
+ INIT_LIST_HEAD(&lsp->ls_sequence.list);
+ lsp->ls_seqid.sequence = &lsp->ls_sequence;
atomic_set(&lsp->ls_count, 1);
lsp->ls_owner = fl_owner;
spin_lock(&clp->cl_lock);
diff --git a/include/asm-sh/cacheflush.h b/include/asm-sh/cacheflush.h
index 9d528ad..e034c36 100644
--- a/include/asm-sh/cacheflush.h
+++ b/include/asm-sh/cacheflush.h
@@ -43,6 +43,12 @@
extern void __flush_invalidate_region(void *start, int size);
#endif
+#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
+static inline void flush_kernel_dcache_page(struct page *page)
+{
+ flush_dcache_page(page);
+}
+
#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_CACHE_OFF)
extern void copy_to_user_page(struct vm_area_struct *vma,
struct page *page, unsigned long vaddr, void *dst, const void *src,
diff --git a/include/asm-sh/uaccess.h b/include/asm-sh/uaccess.h
index f18a1a5..77c391f 100644
--- a/include/asm-sh/uaccess.h
+++ b/include/asm-sh/uaccess.h
@@ -73,38 +73,26 @@
/*
* __access_ok: Check if address with size is OK or not.
*
- * We do three checks:
- * (1) is it user space?
- * (2) addr + size --> carry?
- * (3) addr + size >= 0x80000000 (PAGE_OFFSET)
+ * Uhhuh, this needs 33-bit arithmetic. We have a carry..
*
- * (1) (2) (3) | RESULT
- * 0 0 0 | ok
- * 0 0 1 | ok
- * 0 1 0 | bad
- * 0 1 1 | bad
- * 1 0 0 | ok
- * 1 0 1 | bad
- * 1 1 0 | bad
- * 1 1 1 | bad
+ * sum := addr + size; carry? --> flag = true;
+ * if (sum >= addr_limit) flag = true;
*/
static inline int __access_ok(unsigned long addr, unsigned long size)
{
- unsigned long flag, tmp;
+ unsigned long flag, sum;
- __asm__("stc r7_bank, %0\n\t"
- "mov.l @(8,%0), %0\n\t"
- "clrt\n\t"
- "addc %2, %1\n\t"
- "and %1, %0\n\t"
- "rotcl %0\n\t"
- "rotcl %0\n\t"
- "and #3, %0"
- : "=&z" (flag), "=r" (tmp)
- : "r" (addr), "1" (size)
- : "t");
-
+ __asm__("clrt\n\t"
+ "addc %3, %1\n\t"
+ "movt %0\n\t"
+ "cmp/hi %4, %1\n\t"
+ "rotcl %0"
+ :"=&r" (flag), "=r" (sum)
+ :"1" (addr), "r" (size),
+ "r" (current_thread_info()->addr_limit.seg)
+ :"t");
return flag == 0;
+
}
#endif /* CONFIG_MMU */
diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index 416e000..e3ff21d 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -191,8 +191,8 @@
/*
* offset and length are unused for chain entry. Clear them.
*/
- prv->offset = 0;
- prv->length = 0;
+ prv[prv_nents - 1].offset = 0;
+ prv[prv_nents - 1].length = 0;
/*
* Set lowest bit to indicate a link pointer, and make sure to clear