netxen: deinline and sparse fix
Get rid of dubious casts to (void *) which causes a sparse warning.
And move largeish function from inline to the one file that uses the code,
the compiler can then decide to inline it.
Compile tested only.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index a66ff58..56f8197 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -156,6 +156,103 @@
#define ADAPTER_LIST_SIZE 12
int netxen_cards_found;
+static void netxen_nic_disable_int(struct netxen_adapter *adapter)
+{
+ uint32_t mask = 0x7ff;
+ int retries = 32;
+
+ DPRINTK(1, INFO, "Entered ISR Disable \n");
+
+ switch (adapter->portnum) {
+ case 0:
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
+ break;
+ case 1:
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
+ break;
+ case 2:
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
+ break;
+ case 3:
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
+ break;
+ }
+
+ if (adapter->intr_scheme != -1 &&
+ adapter->intr_scheme != INTR_SCHEME_PERPORT)
+ writel(mask,PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
+
+ /* Window = 0 or 1 */
+ if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
+ do {
+ writel(0xffffffff,
+ PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_STATUS));
+ mask = readl(pci_base_offset(adapter, ISR_INT_VECTOR));
+ if (!(mask & 0x80))
+ break;
+ udelay(10);
+ } while (--retries);
+
+ if (!retries) {
+ printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n",
+ netxen_nic_driver_name);
+ }
+ }
+
+ DPRINTK(1, INFO, "Done with Disable Int\n");
+}
+
+static void netxen_nic_enable_int(struct netxen_adapter *adapter)
+{
+ u32 mask;
+
+ DPRINTK(1, INFO, "Entered ISR Enable \n");
+
+ if (adapter->intr_scheme != -1 &&
+ adapter->intr_scheme != INTR_SCHEME_PERPORT) {
+ switch (adapter->ahw.board_type) {
+ case NETXEN_NIC_GBE:
+ mask = 0x77b;
+ break;
+ case NETXEN_NIC_XGBE:
+ mask = 0x77f;
+ break;
+ default:
+ mask = 0x7ff;
+ break;
+ }
+
+ writel(mask, PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
+ }
+
+ switch (adapter->portnum) {
+ case 0:
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
+ break;
+ case 1:
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
+ break;
+ case 2:
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
+ break;
+ case 3:
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
+ break;
+ }
+
+ if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
+ mask = 0xbff;
+ if (adapter->intr_scheme != -1 &&
+ adapter->intr_scheme != INTR_SCHEME_PERPORT) {
+ writel(0X0, NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
+ }
+ writel(mask,
+ PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_MASK));
+ }
+
+ DPRINTK(1, INFO, "Done with enable Int\n");
+}
+
/*
* netxen_nic_probe()
*