[ARM] Kirkwood: Marvell SheevaPlug support
Signed-off-by: Nicolas Pitre <nico@marvell.com>
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 3600cd9..5324436 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -20,6 +20,12 @@
Say 'Y' here if you want your kernel to support the
Marvell RD-88F6281 Reference Board.
+config MACH_SHEEVAPLUG
+ bool "Marvell SheevaPlug Reference Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell SheevaPlug Reference Board.
+
endmenu
endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index fdff35c..de81b4b 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -3,3 +3,4 @@
obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o
obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
+obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
new file mode 100644
index 0000000..d48989d
--- /dev/null
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-kirkwood/sheevaplug-setup.c
+ *
+ * Marvell SheevaPlug Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include <plat/orion_nand.h>
+#include "common.h"
+
+static struct mtd_partition sheevaplug_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct resource sheevaplug_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
+ .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
+ KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data sheevaplug_nand_data = {
+ .parts = sheevaplug_nand_parts,
+ .nr_parts = ARRAY_SIZE(sheevaplug_nand_parts),
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+ .chip_delay = 25,
+};
+
+static struct platform_device sheevaplug_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &sheevaplug_nand_data,
+ },
+ .resource = &sheevaplug_nand_resource,
+ .num_resources = 1,
+};
+
+static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
+ // unfortunately the CD signal has not been connected */
+};
+
+static void __init sheevaplug_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ kirkwood_uart0_init();
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&sheevaplug_ge00_data);
+ kirkwood_sdio_init(&sheevaplug_mvsdio_data);
+
+ platform_device_register(&sheevaplug_nand_flash);
+}
+
+MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
+ /* Maintainer: shadi Ammouri <shadi@marvell.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = sheevaplug_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END