Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits)
smc91c92_cs: define multicast_table as unsigned char
can: avoids a false warning
e1000e: stop cleaning when we reach tx_ring->next_to_use
igb: restrict WoL for 82576 ET2 Quad Port Server Adapter
virtio_net: missing sg_init_table
Revert "tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skb"
iwlwifi: need check for valid qos packet before free
tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skb
udp: fix for unicast RX path optimization
myri10ge: fix rx_pause in myri10ge_set_pauseparam
net: corrected documentation for hardware time stamping
stmmac: use resource_size()
x.25 attempts to negotiate invalid throughput
x25: Patch to fix bug 15678 - x25 accesses fields beyond end of packet.
bridge: Fix IGMP3 report parsing
cnic: Fix crash during bnx2x MTU change.
qlcnic: fix set mac addr
r6040: fix r6040_multicast_list
vhost-net: fix vq_memory_access_ok error checking
ath9k: fix double calls to ath_radio_enable
...
diff --git a/MAINTAINERS b/MAINTAINERS
index 7a9ccda..5b42290 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -971,6 +971,16 @@
W: http://www.mcuos.com
S: Maintained
+ARM/U300 MACHINE SUPPORT
+M: Linus Walleij <linus.walleij@stericsson.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Supported
+F: arch/arm/mach-u300/
+F: drivers/i2c/busses/i2c-stu300.c
+F: drivers/rtc/rtc-coh901331.c
+F: drivers/watchdog/coh901327_wdt.c
+F: drivers/dma/coh901318*
+
ARM/U8500 ARM ARCHITECTURE
M: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/Makefile b/Makefile
index 67c1001..9754615 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 34
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 0f23009..6ab6b33 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -172,7 +172,7 @@
adr r0, LC0
ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp})
THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip} )
- THUMB( ldr sp, [r0, #28] )
+ THUMB( ldr sp, [r0, #32] )
subs r0, r0, r1 @ calculate the delta offset
@ if delta is zero, we are
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 987fab3..9fcbd6c 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -205,13 +205,25 @@
ldr r3, .saved_pllbr
str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+ tst r3, #(AT91_PMC_MUL & 0xff0000)
+ bne 1f
+ tst r3, #(AT91_PMC_MUL & ~0xff0000)
+ beq 2f
+1:
wait_pllblock
+2:
/* Restore PLLA setting */
ldr r3, .saved_pllar
str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+ tst r3, #(AT91_PMC_MUL & 0xff0000)
+ bne 3f
+ tst r3, #(AT91_PMC_MUL & ~0xff0000)
+ beq 4f
+3:
wait_pllalock
+4:
#ifdef SLOWDOWN_MASTER_CLOCK
/*
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 2ccf670..29c0a91 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -2221,11 +2221,15 @@
int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
int dirtied /* non-zero if any of the pages were modified */
) {
+
+ int rc = 0;
int regionIdx;
int segmentIdx;
DMA_Region_t *region;
DMA_Segment_t *segment;
+ down(&memMap->lock);
+
for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
region = &memMap->region[regionIdx];
@@ -2239,7 +2243,8 @@
printk(KERN_ERR
"%s: vmalloc'd pages are not yet supported\n",
__func__);
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
case DMA_MEM_TYPE_KMALLOC:
@@ -2276,7 +2281,8 @@
printk(KERN_ERR
"%s: Unsupported memory type: %d\n",
__func__, region->memType);
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
}
@@ -2314,9 +2320,10 @@
memMap->numRegionsUsed = 0;
memMap->inUse = 0;
+out:
up(&memMap->lock);
- return 0;
+ return rc;
}
EXPORT_SYMBOL(dma_unmap);
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index cc377ae..cf547ad 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -25,7 +25,7 @@
#include <mach/hardware.h>
/*************************************************************************
- * GPIO handling for EP93xx
+ * Interrupt handling for EP93xx on-chip GPIOs
*************************************************************************/
static unsigned char gpio_int_unmasked[3];
static unsigned char gpio_int_enabled[3];
@@ -40,7 +40,7 @@
static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
-void ep93xx_gpio_update_int_params(unsigned port)
+static void ep93xx_gpio_update_int_params(unsigned port)
{
BUG_ON(port > 2);
@@ -56,7 +56,7 @@
EP93XX_GPIO_REG(int_en_register_offset[port]));
}
-void ep93xx_gpio_int_mask(unsigned line)
+static inline void ep93xx_gpio_int_mask(unsigned line)
{
gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
}
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 3872af1..170f68e 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -62,6 +62,15 @@
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
+config MACH_MX31_3DS_MXC_NAND_USE_BBT
+ bool "Make the MXC NAND driver use the in flash Bad Block Table"
+ depends on MACH_MX31_3DS
+ depends on MTD_NAND_MXC
+ help
+ Enable this if you want that the MXC NAND driver uses the in flash
+ Bad Block Table to know what blocks are bad instead of scanning the
+ entire flash looking for bad block markers.
+
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select ARCH_MX31
@@ -95,6 +104,7 @@
config MACH_ARMADILLO5X0
bool "Support Atmark Armadillo-500 Development Base Board"
select ARCH_MX31
+ select MXC_ULPI if USB_ULPI
help
Include support for Atmark Armadillo-500 platform. This includes
specific configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-mx3/clock-imx31.c
index 80dba99..9a9eb6d 100644
--- a/arch/arm/mach-mx3/clock-imx31.c
+++ b/arch/arm/mach-mx3/clock-imx31.c
@@ -468,6 +468,7 @@
}
DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk);
@@ -490,7 +491,7 @@
DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk);
DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk);
DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk);
-DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ckil_clk);
DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
@@ -514,7 +515,6 @@
DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk);
DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
#define _REGISTER_CLOCK(d, n, c) \
{ \
@@ -572,7 +572,6 @@
_REGISTER_CLOCK(NULL, "iim", iim_clk)
_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
- _REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
};
int __init mx31_clocks_init(unsigned long fref)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 6adb586..f891115 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -575,11 +575,26 @@
.resource = imx_ssi_resources1,
};
-static int mx3_devices_init(void)
+static struct resource imx_wdt_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device imx_wdt_device0 = {
+ .name = "imx-wdt",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(imx_wdt_resources),
+ .resource = imx_wdt_resources,
+};
+
+static int __init mx3_devices_init(void)
{
if (cpu_is_mx31()) {
mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+ imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR;
+ imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff;
mxc_register_device(&mxc_rnga_device, NULL);
}
if (cpu_is_mx35()) {
@@ -597,6 +612,8 @@
imx_ssi_resources0[1].end = MX35_INT_SSI1;
imx_ssi_resources1[1].start = MX35_INT_SSI2;
imx_ssi_resources1[1].end = MX35_INT_SSI2;
+ imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
+ imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
}
return 0;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 42cf175..4f77eb5 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -25,4 +25,5 @@
extern struct platform_device mxc_spi_device2;
extern struct platform_device imx_ssi_device0;
extern struct platform_device imx_ssi_device1;
-
+extern struct platform_device imx_ssi_device1;
+extern struct platform_device imx_wdt_device0;
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 3d72b0b..5f72ec9 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -36,6 +36,9 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/delay.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -52,6 +55,8 @@
#include <mach/ipu.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
#include "devices.h"
#include "crm_regs.h"
@@ -103,8 +108,158 @@
/* I2C2 */
MX31_PIN_CSPI2_MOSI__SCL,
MX31_PIN_CSPI2_MISO__SDA,
+ /* OTG */
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+ MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+ MX31_PIN_USBOTG_STP__USBOTG_STP,
+ /* USB host 2 */
+ IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
};
+/* USB */
+#if defined(CONFIG_USB_ULPI)
+
+#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
+#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
+#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbotg_init(struct platform_device *pdev)
+{
+ int err;
+
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+ /* Chip already enabled by hardware */
+ /* OTG phy reset*/
+ err = gpio_request(OTG_RESET, "USB-OTG-RESET");
+ if (err) {
+ pr_err("Failed to request the usb otg reset gpio\n");
+ return err;
+ }
+
+ err = gpio_direction_output(OTG_RESET, 1/*HIGH*/);
+ if (err) {
+ pr_err("Failed to reset the usb otg phy\n");
+ goto otg_free_reset;
+ }
+
+ gpio_set_value(OTG_RESET, 0/*LOW*/);
+ mdelay(5);
+ gpio_set_value(OTG_RESET, 1/*HIGH*/);
+
+ return 0;
+
+otg_free_reset:
+ gpio_free(OTG_RESET);
+ return err;
+}
+
+static int usbh2_init(struct platform_device *pdev)
+{
+ int err;
+
+ mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+ mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+
+ /* Enable the chip */
+ err = gpio_request(USBH2_CS, "USB-H2-CS");
+ if (err) {
+ pr_err("Failed to request the usb host 2 CS gpio\n");
+ return err;
+ }
+
+ err = gpio_direction_output(USBH2_CS, 0/*Enabled*/);
+ if (err) {
+ pr_err("Failed to drive the usb host 2 CS gpio\n");
+ goto h2_free_cs;
+ }
+
+ /* H2 phy reset*/
+ err = gpio_request(USBH2_RESET, "USB-H2-RESET");
+ if (err) {
+ pr_err("Failed to request the usb host 2 reset gpio\n");
+ goto h2_free_cs;
+ }
+
+ err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/);
+ if (err) {
+ pr_err("Failed to reset the usb host 2 phy\n");
+ goto h2_free_reset;
+ }
+
+ gpio_set_value(USBH2_RESET, 0/*LOW*/);
+ mdelay(5);
+ gpio_set_value(USBH2_RESET, 1/*HIGH*/);
+
+ return 0;
+
+h2_free_reset:
+ gpio_free(USBH2_RESET);
+h2_free_cs:
+ gpio_free(USBH2_CS);
+ return err;
+}
+
+static struct mxc_usbh_platform_data usbotg_pdata = {
+ .init = usbotg_init,
+ .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+ .init = usbh2_init,
+ .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+#endif /* CONFIG_USB_ULPI */
+
/* RTC over I2C*/
#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4)
@@ -393,6 +548,17 @@
if (armadillo5x0_i2c_rtc.irq == 0)
pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
+
+ /* USB */
+#if defined(CONFIG_USB_ULPI)
+ usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ mxc_register_device(&mxc_otg_host, &usbotg_pdata);
+ mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
}
static void __init armadillo5x0_timer_init(void)
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index b88c18a..f54af1e 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -23,6 +23,9 @@
#include <linux/gpio.h>
#include <linux/smsc911x.h>
#include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/machine.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -31,26 +34,96 @@
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <mach/common.h>
-#include <mach/board-mx31pdk.h>
+#include <mach/board-mx31_3ds.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/mxc_nand.h>
+#include <mach/spi.h>
#include "devices.h"
/*!
- * @file mx31pdk.c
+ * @file mx31_3ds.c
*
* @brief This file contains the board-specific initialization routines.
*
* @ingroup System
*/
-static int mx31pdk_pins[] = {
+static int mx31_3ds_pins[] = {
/* UART1 */
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+ /* SPI 1 */
+ MX31_PIN_CSPI2_SCLK__SCLK,
+ MX31_PIN_CSPI2_MOSI__MOSI,
+ MX31_PIN_CSPI2_MISO__MISO,
+ MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI2_SS0__SS0,
+ MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
+ /* MC13783 IRQ */
+ IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
+};
+
+/* Regulators */
+static struct regulator_init_data pwgtx_init = {
+ .constraints = {
+ .boot_on = 1,
+ .always_on = 1,
+ },
+};
+
+static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
+ {
+ .id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */
+ .init_data = &pwgtx_init,
+ }, {
+ .id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */
+ .init_data = &pwgtx_init,
+ },
+};
+
+/* MC13783 */
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+ .regulators = mx31_3ds_regulators,
+ .num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
+ .flags = MC13783_USE_REGULATOR,
+};
+
+/* SPI */
+static int spi1_internal_chipselect[] = {
+ MXC_SPI_CS(0),
+ MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi1_pdata = {
+ .chipselect = spi1_internal_chipselect,
+ .num_chipselect = ARRAY_SIZE(spi1_internal_chipselect),
+};
+
+static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
+ {
+ .modalias = "mc13783",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 1, /* SS2 */
+ .platform_data = &mc13783_pdata,
+ .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ .mode = SPI_CS_HIGH,
+ },
+};
+
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
+ .width = 1,
+ .hw_ecc = 1,
+#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
+ .flash_bbt = 1,
+#endif
};
static struct imxuart_platform_data uart_pdata = {
@@ -95,7 +168,7 @@
* LEDs, switches, interrupts for Ethernet.
*/
-static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
+static void mx31_3ds_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
{
uint32_t imr_val;
uint32_t int_valid;
@@ -163,7 +236,7 @@
.unmask = expio_unmask_irq,
};
-static int __init mx31pdk_init_expio(void)
+static int __init mx31_3ds_init_expio(void)
{
int i;
int ret;
@@ -176,7 +249,7 @@
return -ENODEV;
}
- pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
+ pr_info("i.MX31 3DS Debug board detected, rev = 0x%04X\n",
__raw_readw(CPLD_CODE_VER_REG));
/*
@@ -201,7 +274,7 @@
set_irq_flags(i, IRQF_VALID);
}
set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
- set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
+ set_irq_chained_handler(EXPIO_PARENT_INT, mx31_3ds_expio_irq_handler);
return 0;
}
@@ -209,7 +282,7 @@
/*
* This structure defines the MX31 memory map.
*/
-static struct map_desc mx31pdk_io_desc[] __initdata = {
+static struct map_desc mx31_3ds_io_desc[] __initdata = {
{
.virtual = MX31_CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
@@ -221,10 +294,10 @@
/*
* Set up static virtual mappings.
*/
-static void __init mx31pdk_map_io(void)
+static void __init mx31_3ds_map_io(void)
{
mx31_map_io();
- iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
+ iotable_init(mx31_3ds_io_desc, ARRAY_SIZE(mx31_3ds_io_desc));
}
/*!
@@ -232,35 +305,40 @@
*/
static void __init mxc_board_init(void)
{
- mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
- "mx31pdk");
+ mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
+ "mx31_3ds");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata);
- if (!mx31pdk_init_expio())
+ mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+ spi_register_board_info(mx31_3ds_spi_devs,
+ ARRAY_SIZE(mx31_3ds_spi_devs));
+
+ if (!mx31_3ds_init_expio())
platform_device_register(&smsc911x_device);
}
-static void __init mx31pdk_timer_init(void)
+static void __init mx31_3ds_timer_init(void)
{
mx31_clocks_init(26000000);
}
-static struct sys_timer mx31pdk_timer = {
- .init = mx31pdk_timer_init,
+static struct sys_timer mx31_3ds_timer = {
+ .init = mx31_3ds_timer_init,
};
/*
* The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31PDK data structure.
+ * initialize __mach_desc_MX31_3DS data structure.
*/
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX3x_PHYS_OFFSET + 0x100,
- .map_io = mx31pdk_map_io,
+ .map_io = mx31_3ds_map_io,
.init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
- .timer = &mx31pdk_timer,
+ .timer = &mx31_3ds_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index 034ec81..2df1ec5 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -35,7 +35,6 @@
#include <linux/can/platform/sja1000.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
#include <linux/gfp.h>
#include <media/soc_camera.h>
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index ccd8742..093c595 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -28,7 +28,6 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/gpio.h>
-#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
@@ -206,5 +205,6 @@
mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
mxc_register_device(&mxc_spi_device0, &spi0_pdata);
platform_device_register(&litekit_led_device);
+ mxc_register_device(&imx_wdt_device0, NULL);
}
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index be90c03..8f85f73 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -757,7 +757,7 @@
/* GPT */
DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, &ipg_perclk, NULL);
+ NULL, NULL, &ipg_clk, NULL);
DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
NULL, NULL, &ipg_clk, NULL);
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 41c769f..2d37785 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -14,9 +14,62 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <mach/hardware.h>
#include <asm/io.h>
+static int cpu_silicon_rev = -1;
+
+#define SI_REV 0x48
+
+static void query_silicon_parameter(void)
+{
+ void __iomem *rom = ioremap(MX51_IROM_BASE_ADDR, MX51_IROM_SIZE);
+ u32 rev;
+
+ if (!rom) {
+ cpu_silicon_rev = -EINVAL;
+ return;
+ }
+
+ rev = readl(rom + SI_REV);
+ switch (rev) {
+ case 0x1:
+ cpu_silicon_rev = MX51_CHIP_REV_1_0;
+ break;
+ case 0x2:
+ cpu_silicon_rev = MX51_CHIP_REV_1_1;
+ break;
+ case 0x10:
+ cpu_silicon_rev = MX51_CHIP_REV_2_0;
+ break;
+ case 0x20:
+ cpu_silicon_rev = MX51_CHIP_REV_3_0;
+ break;
+ default:
+ cpu_silicon_rev = 0;
+ }
+
+ iounmap(rom);
+}
+
+/*
+ * Returns:
+ * the silicon revision of the cpu
+ * -EINVAL - not a mx51
+ */
+int mx51_revision(void)
+{
+ if (!cpu_is_mx51())
+ return -EINVAL;
+
+ if (cpu_silicon_rev == -1)
+ query_silicon_parameter();
+
+ return cpu_silicon_rev;
+}
+EXPORT_SYMBOL(mx51_revision);
+
static int __init post_cpu_init(void)
{
unsigned int reg;
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index c21e18b..b7677ef 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -35,11 +35,6 @@
.length = MX51_DEBUG_SIZE,
.type = MT_DEVICE
}, {
- .virtual = MX51_TZIC_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX51_TZIC_BASE_ADDR),
- .length = MX51_TZIC_SIZE,
- .type = MT_DEVICE
- }, {
.virtual = MX51_AIPS1_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR),
.length = MX51_AIPS1_SIZE,
@@ -54,11 +49,6 @@
.pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR),
.length = MX51_AIPS2_SIZE,
.type = MT_DEVICE
- }, {
- .virtual = MX51_NFC_AXI_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX51_NFC_AXI_BASE_ADDR),
- .length = MX51_NFC_AXI_SIZE,
- .type = MT_DEVICE
},
};
@@ -69,14 +59,6 @@
*/
void __init mx51_map_io(void)
{
- u32 tzic_addr;
-
- if (mx51_revision() < MX51_CHIP_REV_2_0)
- tzic_addr = 0x8FFFC000;
- else
- tzic_addr = 0xE0003000;
- mxc_io_desc[2].pfn = __phys_to_pfn(tzic_addr);
-
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR));
@@ -85,5 +67,17 @@
void __init mx51_init_irq(void)
{
- tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
+ unsigned long tzic_addr;
+ void __iomem *tzic_virt;
+
+ if (mx51_revision() < MX51_CHIP_REV_2_0)
+ tzic_addr = MX51_TZIC_BASE_ADDR_TO1;
+ else
+ tzic_addr = MX51_TZIC_BASE_ADDR;
+
+ tzic_virt = ioremap(tzic_addr, SZ_16K);
+ if (!tzic_virt)
+ panic("unable to map TZIC interrupt controller\n");
+
+ tzic_init_irq(tzic_virt);
}
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 9d4da6a..4223d08 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -420,6 +420,10 @@
user_pgprot |= L_PTE_SHARED;
kern_pgprot |= L_PTE_SHARED;
vecs_pgprot |= L_PTE_SHARED;
+ mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S;
+ mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED;
+ mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
+ mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
similarity index 93%
rename from arch/arm/plat-mxc/include/mach/board-mx31pdk.h
rename to arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
index 2bbd6ed..da92933a 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
@@ -8,8 +8,8 @@
* published by the Free Software Foundation.
*/
-#ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
-#define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
+#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
+#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
/* Definitions for components on the Debug board */
@@ -56,4 +56,4 @@
#define MXC_MAX_EXP_IO_LINES 16
-#endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */
+#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index 771532b..5aad344 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -14,7 +14,7 @@
* FB100000 70000000 1M SPBA 0
* FB000000 73F00000 1M AIPS 1
* FB200000 83F00000 1M AIPS 2
- * FA100000 8FFFC000 16K TZIC (interrupt controller)
+ * 8FFFC000 16K TZIC (interrupt controller)
* 90000000 256M CSD0 SDRAM/DDR
* A0000000 256M CSD1 SDRAM/DDR
* B0000000 128M CS0 Flash
@@ -23,11 +23,17 @@
* C8000000 64M CS3 Flash
* CC000000 32M CS4 SRAM
* CE000000 32M CS5 SRAM
- * F9000000 CFFF0000 64K NFC (NAND Flash AXI)
+ * CFFF0000 64K NFC (NAND Flash AXI)
*
*/
/*
+ * IROM
+ */
+#define MX51_IROM_BASE_ADDR 0x0
+#define MX51_IROM_SIZE SZ_64K
+
+/*
* IRAM
*/
#define MX51_IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */
@@ -40,7 +46,6 @@
* NFC
*/
#define MX51_NFC_AXI_BASE_ADDR 0xCFFF0000 /* NAND flash AXI */
-#define MX51_NFC_AXI_BASE_ADDR_VIRT 0xF9000000
#define MX51_NFC_AXI_SIZE SZ_64K
/*
@@ -49,9 +54,8 @@
#define MX51_GPU_BASE_ADDR 0x20000000
#define MX51_GPU2D_BASE_ADDR 0xD0000000
-#define MX51_TZIC_BASE_ADDR 0x8FFFC000
-#define MX51_TZIC_BASE_ADDR_VIRT 0xFA100000
-#define MX51_TZIC_SIZE SZ_16K
+#define MX51_TZIC_BASE_ADDR_TO1 0x8FFFC000
+#define MX51_TZIC_BASE_ADDR 0xE0000000
#define MX51_DEBUG_BASE_ADDR 0x60000000
#define MX51_DEBUG_BASE_ADDR_VIRT 0xFA200000
@@ -232,12 +236,10 @@
#define MX51_IO_ADDRESS(x) \
(void __iomem *) \
(MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) : \
- MX51_IS_MODULE(x, TZIC) ? MX51_TZIC_IO_ADDRESS(x) : \
MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) : \
MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) : \
MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) : \
- MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \
- MX51_IS_MODULE(x, NFC_AXI) ? MX51_NFC_AXI_IO_ADDRESS(x) : \
+ MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \
0xDEADBEEF)
/*
@@ -246,9 +248,6 @@
#define MX51_IRAM_IO_ADDRESS(x) \
(((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT)
-#define MX51_TZIC_IO_ADDRESS(x) \
- (((x) - MX51_TZIC_BASE_ADDR) + MX51_TZIC_BASE_ADDR_VIRT)
-
#define MX51_DEBUG_IO_ADDRESS(x) \
(((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT)
@@ -261,9 +260,6 @@
#define MX51_AIPS2_IO_ADDRESS(x) \
(((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT)
-#define MX51_NFC_AXI_IO_ADDRESS(x) \
- (((x) - MX51_NFC_AXI_BASE_ADDR) + MX51_NFC_AXI_BASE_ADDR_VIRT)
-
#define MX51_IS_MEM_DEVICE_NONSHARED(x) 0
/*
@@ -443,12 +439,7 @@
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-extern unsigned int system_rev;
-
-static inline unsigned int mx51_revision(void)
-{
- return system_rev;
-}
+extern int mx51_revision(void);
#endif
#endif /* __ASM_ARCH_MXC_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 52e476a..b6d3d0f 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -66,6 +66,7 @@
#define MX2X_UART1_BASE_ADDR 0x1000a000
#define MX3X_UART1_BASE_ADDR 0x43F90000
#define MX3X_UART2_BASE_ADDR 0x43F94000
+#define MX51_UART1_BASE_ADDR 0x73fbc000
static __inline__ void __arch_decomp_setup(unsigned long arch_id)
{
@@ -101,6 +102,9 @@
case MACH_TYPE_MAGX_ZN5:
uart_base = MX3X_UART2_BASE_ADDR;
break;
+ case MACH_TYPE_MX51_BABBAGE:
+ uart_base = MX51_UART1_BASE_ADDR;
+ break;
default:
break;
}
diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c
index 379536e..be7e92e 100644
--- a/arch/mips/alchemy/devboards/db1200/setup.c
+++ b/arch/mips/alchemy/devboards/db1200/setup.c
@@ -60,43 +60,6 @@
wmb();
}
-/* use the hexleds to count the number of times the cpu has entered
- * wait, the dots to indicate whether the CPU is currently idle or
- * active (dots off = sleeping, dots on = working) for cases where
- * the number doesn't change for a long(er) period of time.
- */
-static void db1200_wait(void)
-{
- __asm__(" .set push \n"
- " .set mips3 \n"
- " .set noreorder \n"
- " cache 0x14, 0(%0) \n"
- " cache 0x14, 32(%0) \n"
- " cache 0x14, 64(%0) \n"
- /* dots off: we're about to call wait */
- " lui $26, 0xb980 \n"
- " ori $27, $0, 3 \n"
- " sb $27, 0x18($26) \n"
- " sync \n"
- " nop \n"
- " wait \n"
- " nop \n"
- " nop \n"
- " nop \n"
- " nop \n"
- " nop \n"
- /* dots on: there's work to do, increment cntr */
- " lui $26, 0xb980 \n"
- " sb $0, 0x18($26) \n"
- " lui $26, 0xb9c0 \n"
- " lb $27, 0($26) \n"
- " addiu $27, $27, 1 \n"
- " sb $27, 0($26) \n"
- " sync \n"
- " .set pop \n"
- : : "r" (db1200_wait));
-}
-
static int __init db1200_arch_init(void)
{
/* GPIO7 is low-level triggered CPLD cascade */
@@ -110,9 +73,6 @@
irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN;
irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN;
- if (cpu_wait)
- cpu_wait = db1200_wait;
-
return 0;
}
arch_initcall(db1200_arch_init);
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 246df7a..2fafc78 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -168,7 +168,7 @@
.on = vlynq_on,
.off = vlynq_off,
},
- .reset_bit = 26,
+ .reset_bit = 16,
.gpio_bit = 19,
};
@@ -600,6 +600,7 @@
}
if (ar7_has_high_cpmac()) {
+ res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
if (!res) {
cpmac_get_mac(1, cpmac_high_data.dev_addr);
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index ea17941..8dba8cf 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -18,6 +18,7 @@
#include <asm/addrspace.h>
#include <bcm63xx_board.h>
#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_uart.h>
#include <bcm63xx_regs.h>
#include <bcm63xx_io.h>
#include <bcm63xx_dev_pci.h>
@@ -40,6 +41,7 @@
.name = "96338GW",
.expected_cpu_id = 0x6338,
+ .has_uart0 = 1,
.has_enet0 = 1,
.enet0 = {
.force_speed_100 = 1,
@@ -82,6 +84,7 @@
.name = "96338W",
.expected_cpu_id = 0x6338,
+ .has_uart0 = 1,
.has_enet0 = 1,
.enet0 = {
.force_speed_100 = 1,
@@ -126,6 +129,8 @@
static struct board_info __initdata board_96345gw2 = {
.name = "96345GW2",
.expected_cpu_id = 0x6345,
+
+ .has_uart0 = 1,
};
#endif
@@ -137,6 +142,7 @@
.name = "96348R",
.expected_cpu_id = 0x6348,
+ .has_uart0 = 1,
.has_enet0 = 1,
.has_pci = 1,
@@ -180,6 +186,7 @@
.name = "96348GW-10",
.expected_cpu_id = 0x6348,
+ .has_uart0 = 1,
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
@@ -239,6 +246,7 @@
.name = "96348GW-11",
.expected_cpu_id = 0x6348,
+ .has_uart0 = 1,
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
@@ -292,6 +300,7 @@
.name = "96348GW",
.expected_cpu_id = 0x6348,
+ .has_uart0 = 1,
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
@@ -349,9 +358,10 @@
.name = "F@ST2404",
.expected_cpu_id = 0x6348,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
.enet0 = {
.has_phy = 1,
@@ -368,10 +378,30 @@
.has_ehci0 = 1,
};
+static struct board_info __initdata board_rta1025w_16 = {
+ .name = "RTA1025W_16",
+ .expected_cpu_id = 0x6348,
+
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+
static struct board_info __initdata board_DV201AMR = {
.name = "DV201AMR",
.expected_cpu_id = 0x6348,
+ .has_uart0 = 1,
.has_pci = 1,
.has_ohci0 = 1,
@@ -391,6 +421,7 @@
.name = "96348GW-A",
.expected_cpu_id = 0x6348,
+ .has_uart0 = 1,
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
@@ -416,6 +447,7 @@
.name = "96358VW",
.expected_cpu_id = 0x6358,
+ .has_uart0 = 1,
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
@@ -467,6 +499,7 @@
.name = "96358VW2",
.expected_cpu_id = 0x6358,
+ .has_uart0 = 1,
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
@@ -514,6 +547,7 @@
.name = "AGPF-S0",
.expected_cpu_id = 0x6358,
+ .has_uart0 = 1,
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
@@ -531,6 +565,27 @@
.has_ohci0 = 1,
.has_ehci0 = 1,
};
+
+static struct board_info __initdata board_DWVS0 = {
+ .name = "DWV-S0",
+ .expected_cpu_id = 0x6358,
+
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .has_ohci0 = 1,
+};
#endif
/*
@@ -552,16 +607,88 @@
&board_FAST2404,
&board_DV201AMR,
&board_96348gw_a,
+ &board_rta1025w_16,
#endif
#ifdef CONFIG_BCM63XX_CPU_6358
&board_96358vw,
&board_96358vw2,
&board_AGPFS0,
+ &board_DWVS0,
#endif
};
/*
+ * Register a sane SPROMv2 to make the on-board
+ * bcm4318 WLAN work
+ */
+#ifdef CONFIG_SSB_PCIHOST
+static struct ssb_sprom bcm63xx_sprom = {
+ .revision = 0x02,
+ .board_rev = 0x17,
+ .country_code = 0x0,
+ .ant_available_bg = 0x3,
+ .pa0b0 = 0x15ae,
+ .pa0b1 = 0xfa85,
+ .pa0b2 = 0xfe8d,
+ .pa1b0 = 0xffff,
+ .pa1b1 = 0xffff,
+ .pa1b2 = 0xffff,
+ .gpio0 = 0xff,
+ .gpio1 = 0xff,
+ .gpio2 = 0xff,
+ .gpio3 = 0xff,
+ .maxpwr_bg = 0x004c,
+ .itssi_bg = 0x00,
+ .boardflags_lo = 0x2848,
+ .boardflags_hi = 0x0000,
+};
+#endif
+
+/*
+ * return board name for /proc/cpuinfo
+ */
+const char *board_get_name(void)
+{
+ return board.name;
+}
+
+/*
+ * register & return a new board mac address
+ */
+static int board_get_mac_address(u8 *mac)
+{
+ u8 *p;
+ int count;
+
+ if (mac_addr_used >= nvram.mac_addr_count) {
+ printk(KERN_ERR PFX "not enough mac address\n");
+ return -ENODEV;
+ }
+
+ memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
+ p = mac + ETH_ALEN - 1;
+ count = mac_addr_used;
+
+ while (count--) {
+ do {
+ (*p)++;
+ if (*p != 0)
+ break;
+ p--;
+ } while (p != mac);
+ }
+
+ if (p == mac) {
+ printk(KERN_ERR PFX "unable to fetch mac address\n");
+ return -ENODEV;
+ }
+
+ mac_addr_used++;
+ return 0;
+}
+
+/*
* early init callback, read nvram data from flash and checksum it
*/
void __init board_prom_init(void)
@@ -659,6 +786,17 @@
}
bcm_gpio_writel(val, GPIO_MODE_REG);
+
+ /* Generate MAC address for WLAN and
+ * register our SPROM */
+#ifdef CONFIG_SSB_PCIHOST
+ if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+ memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+ memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+ if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
+ printk(KERN_ERR "failed to register fallback SPROM\n");
+ }
+#endif
}
/*
@@ -676,49 +814,6 @@
panic("unexpected CPU for bcm963xx board");
}
-/*
- * return board name for /proc/cpuinfo
- */
-const char *board_get_name(void)
-{
- return board.name;
-}
-
-/*
- * register & return a new board mac address
- */
-static int board_get_mac_address(u8 *mac)
-{
- u8 *p;
- int count;
-
- if (mac_addr_used >= nvram.mac_addr_count) {
- printk(KERN_ERR PFX "not enough mac address\n");
- return -ENODEV;
- }
-
- memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
- p = mac + ETH_ALEN - 1;
- count = mac_addr_used;
-
- while (count--) {
- do {
- (*p)++;
- if (*p != 0)
- break;
- p--;
- } while (p != mac);
- }
-
- if (p == mac) {
- printk(KERN_ERR PFX "unable to fetch mac address\n");
- return -ENODEV;
- }
-
- mac_addr_used++;
- return 0;
-}
-
static struct mtd_partition mtd_partitions[] = {
{
.name = "cfe",
@@ -750,33 +845,6 @@
},
};
-/*
- * Register a sane SPROMv2 to make the on-board
- * bcm4318 WLAN work
- */
-#ifdef CONFIG_SSB_PCIHOST
-static struct ssb_sprom bcm63xx_sprom = {
- .revision = 0x02,
- .board_rev = 0x17,
- .country_code = 0x0,
- .ant_available_bg = 0x3,
- .pa0b0 = 0x15ae,
- .pa0b1 = 0xfa85,
- .pa0b2 = 0xfe8d,
- .pa1b0 = 0xffff,
- .pa1b1 = 0xffff,
- .pa1b2 = 0xffff,
- .gpio0 = 0xff,
- .gpio1 = 0xff,
- .gpio2 = 0xff,
- .gpio3 = 0xff,
- .maxpwr_bg = 0x004c,
- .itssi_bg = 0x00,
- .boardflags_lo = 0x2848,
- .boardflags_hi = 0x0000,
-};
-#endif
-
static struct gpio_led_platform_data bcm63xx_led_data;
static struct platform_device bcm63xx_gpio_leds = {
@@ -792,6 +860,12 @@
{
u32 val;
+ if (board.has_uart0)
+ bcm63xx_uart_register(0);
+
+ if (board.has_uart1)
+ bcm63xx_uart_register(1);
+
if (board.has_pccard)
bcm63xx_pcmcia_register();
@@ -806,17 +880,6 @@
if (board.has_dsp)
bcm63xx_dsp_register(&board.dsp);
- /* Generate MAC address for WLAN and
- * register our SPROM */
-#ifdef CONFIG_SSB_PCIHOST
- if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
- memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
- memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
- if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
- printk(KERN_ERR "failed to register fallback SPROM\n");
- }
-#endif
-
/* read base address of boot chip select (0) */
if (BCMCPU_IS_6345())
val = 0x1fc00000;
diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c
index 70378bb..cbb7caf 100644
--- a/arch/mips/bcm63xx/cpu.c
+++ b/arch/mips/bcm63xx/cpu.c
@@ -36,6 +36,7 @@
[RSET_TIMER] = BCM_6338_TIMER_BASE,
[RSET_WDT] = BCM_6338_WDT_BASE,
[RSET_UART0] = BCM_6338_UART0_BASE,
+ [RSET_UART1] = BCM_6338_UART1_BASE,
[RSET_GPIO] = BCM_6338_GPIO_BASE,
[RSET_SPI] = BCM_6338_SPI_BASE,
[RSET_OHCI0] = BCM_6338_OHCI0_BASE,
@@ -72,6 +73,7 @@
[RSET_TIMER] = BCM_6345_TIMER_BASE,
[RSET_WDT] = BCM_6345_WDT_BASE,
[RSET_UART0] = BCM_6345_UART0_BASE,
+ [RSET_UART1] = BCM_6345_UART1_BASE,
[RSET_GPIO] = BCM_6345_GPIO_BASE,
[RSET_SPI] = BCM_6345_SPI_BASE,
[RSET_UDC0] = BCM_6345_UDC0_BASE,
@@ -109,6 +111,7 @@
[RSET_TIMER] = BCM_6348_TIMER_BASE,
[RSET_WDT] = BCM_6348_WDT_BASE,
[RSET_UART0] = BCM_6348_UART0_BASE,
+ [RSET_UART1] = BCM_6348_UART1_BASE,
[RSET_GPIO] = BCM_6348_GPIO_BASE,
[RSET_SPI] = BCM_6348_SPI_BASE,
[RSET_OHCI0] = BCM_6348_OHCI0_BASE,
@@ -150,6 +153,7 @@
[RSET_TIMER] = BCM_6358_TIMER_BASE,
[RSET_WDT] = BCM_6358_WDT_BASE,
[RSET_UART0] = BCM_6358_UART0_BASE,
+ [RSET_UART1] = BCM_6358_UART1_BASE,
[RSET_GPIO] = BCM_6358_GPIO_BASE,
[RSET_SPI] = BCM_6358_SPI_BASE,
[RSET_OHCI0] = BCM_6358_OHCI0_BASE,
@@ -170,6 +174,7 @@
static const int bcm96358_irqs[] = {
[IRQ_TIMER] = BCM_6358_TIMER_IRQ,
[IRQ_UART0] = BCM_6358_UART0_IRQ,
+ [IRQ_UART1] = BCM_6358_UART1_IRQ,
[IRQ_DSL] = BCM_6358_DSL_IRQ,
[IRQ_ENET0] = BCM_6358_ENET0_IRQ,
[IRQ_ENET1] = BCM_6358_ENET1_IRQ,
diff --git a/arch/mips/bcm63xx/dev-uart.c b/arch/mips/bcm63xx/dev-uart.c
index b051946..c2963da 100644
--- a/arch/mips/bcm63xx/dev-uart.c
+++ b/arch/mips/bcm63xx/dev-uart.c
@@ -11,31 +11,65 @@
#include <linux/platform_device.h>
#include <bcm63xx_cpu.h>
-static struct resource uart_resources[] = {
+static struct resource uart0_resources[] = {
{
- .start = -1, /* filled at runtime */
- .end = -1, /* filled at runtime */
+ /* start & end filled at runtime */
.flags = IORESOURCE_MEM,
},
{
- .start = -1, /* filled at runtime */
+ /* start filled at runtime */
.flags = IORESOURCE_IRQ,
},
};
-static struct platform_device bcm63xx_uart_device = {
- .name = "bcm63xx_uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(uart_resources),
- .resource = uart_resources,
+static struct resource uart1_resources[] = {
+ {
+ /* start & end filled at runtime */
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* start filled at runtime */
+ .flags = IORESOURCE_IRQ,
+ },
};
-int __init bcm63xx_uart_register(void)
+static struct platform_device bcm63xx_uart_devices[] = {
+ {
+ .name = "bcm63xx_uart",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+ .resource = uart0_resources,
+ },
+
+ {
+ .name = "bcm63xx_uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+ .resource = uart1_resources,
+ }
+};
+
+int __init bcm63xx_uart_register(unsigned int id)
{
- uart_resources[0].start = bcm63xx_regset_address(RSET_UART0);
- uart_resources[0].end = uart_resources[0].start;
- uart_resources[0].end += RSET_UART_SIZE - 1;
- uart_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
- return platform_device_register(&bcm63xx_uart_device);
+ if (id >= ARRAY_SIZE(bcm63xx_uart_devices))
+ return -ENODEV;
+
+ if (id == 1 && !BCMCPU_IS_6358())
+ return -ENODEV;
+
+ if (id == 0) {
+ uart0_resources[0].start = bcm63xx_regset_address(RSET_UART0);
+ uart0_resources[0].end = uart0_resources[0].start +
+ RSET_UART_SIZE - 1;
+ uart0_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
+ }
+
+ if (id == 1) {
+ uart1_resources[0].start = bcm63xx_regset_address(RSET_UART1);
+ uart1_resources[0].end = uart1_resources[0].start +
+ RSET_UART_SIZE - 1;
+ uart1_resources[1].start = bcm63xx_get_irq_number(IRQ_UART1);
+ }
+
+ return platform_device_register(&bcm63xx_uart_devices[id]);
}
-arch_initcall(bcm63xx_uart_register);
diff --git a/arch/mips/bcm63xx/gpio.c b/arch/mips/bcm63xx/gpio.c
index 87ca390..315bc7f 100644
--- a/arch/mips/bcm63xx/gpio.c
+++ b/arch/mips/bcm63xx/gpio.c
@@ -125,10 +125,10 @@
int __init bcm63xx_gpio_init(void)
{
+ gpio_out_low = bcm_gpio_readl(GPIO_DATA_LO_REG);
+ gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
return gpiochip_add(&bcm63xx_gpio_chip);
}
-
-arch_initcall(bcm63xx_gpio_init);
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index b321d3b..9a06fa9 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -45,9 +45,6 @@
extern void pci_console_init(const char *arg);
#endif
-#ifdef CONFIG_CAVIUM_RESERVE32
-extern uint64_t octeon_reserve32_memory;
-#endif
static unsigned long long MAX_MEMORY = 512ull << 20;
struct octeon_boot_descriptor *octeon_boot_desc_ptr;
@@ -186,54 +183,6 @@
write_octeon_c0_dcacheerr(0);
}
-#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
-/**
- * Called on every core to setup the wired tlb entry needed
- * if CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB is set.
- *
- */
-static void octeon_hal_setup_per_cpu_reserved32(void *unused)
-{
- /*
- * The config has selected to wire the reserve32 memory for all
- * userspace applications. We need to put a wired TLB entry in for each
- * 512MB of reserve32 memory. We only handle double 256MB pages here,
- * so reserve32 must be multiple of 512MB.
- */
- uint32_t size = CONFIG_CAVIUM_RESERVE32;
- uint32_t entrylo0 =
- 0x7 | ((octeon_reserve32_memory & ((1ul << 40) - 1)) >> 6);
- uint32_t entrylo1 = entrylo0 + (256 << 14);
- uint32_t entryhi = (0x80000000UL - (CONFIG_CAVIUM_RESERVE32 << 20));
- while (size >= 512) {
-#if 0
- pr_info("CPU%d: Adding double wired TLB entry for 0x%lx\n",
- smp_processor_id(), entryhi);
-#endif
- add_wired_entry(entrylo0, entrylo1, entryhi, PM_256M);
- entrylo0 += 512 << 14;
- entrylo1 += 512 << 14;
- entryhi += 512 << 20;
- size -= 512;
- }
-}
-#endif /* CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB */
-
-/**
- * Called to release the named block which was used to made sure
- * that nobody used the memory for something else during
- * init. Now we'll free it so userspace apps can use this
- * memory region with bootmem_alloc.
- *
- * This function is called only once from prom_free_prom_memory().
- */
-void octeon_hal_setup_reserved32(void)
-{
-#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
- on_each_cpu(octeon_hal_setup_per_cpu_reserved32, NULL, 0, 1);
-#endif
-}
-
/**
* Reboot Octeon
*
@@ -294,18 +243,6 @@
octeon_kill_core(NULL);
}
-#if 0
-/**
- * Platform time init specifics.
- * Returns
- */
-void __init plat_time_init(void)
-{
- /* Nothing special here, but we are required to have one */
-}
-
-#endif
-
/**
* Handle all the error condition interrupts that might occur.
*
@@ -502,25 +439,13 @@
* memory when it is getting memory from the
* bootloader. Later, after the memory allocations are
* complete, the reserve32 will be freed.
- */
-#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
- if (CONFIG_CAVIUM_RESERVE32 & 0x1ff)
- pr_err("CAVIUM_RESERVE32 isn't a multiple of 512MB. "
- "This is required if CAVIUM_RESERVE32_USE_WIRED_TLB "
- "is set\n");
- else
- addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20,
- 0, 0, 512 << 20,
- "CAVIUM_RESERVE32", 0);
-#else
- /*
+ *
* Allocate memory for RESERVED32 aligned on 2MB boundary. This
* is in case we later use hugetlb entries with it.
*/
addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20,
0, 0, 2 << 20,
"CAVIUM_RESERVE32", 0);
-#endif
if (addr < 0)
pr_err("Failed to allocate CAVIUM_RESERVE32 memory area\n");
else
@@ -817,9 +742,4 @@
panic("Unable to request_irq(OCTEON_IRQ_RML)\n");
}
#endif
-
- /* This call is here so that it is performed after any TLB
- initializations. It needs to be after these in case the
- CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB option is set */
- octeon_hal_setup_reserved32();
}
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index 51e9802..6d99b9d 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -279,14 +279,6 @@
uint32_t avail_coremask;
struct cvmx_bootmem_named_block_desc *block_desc;
-#ifdef CONFIG_CAVIUM_OCTEON_WATCHDOG
- /* Disable the watchdog */
- cvmx_ciu_wdogx_t ciu_wdog;
- ciu_wdog.u64 = cvmx_read_csr(CVMX_CIU_WDOGX(cpu));
- ciu_wdog.s.mode = 0;
- cvmx_write_csr(CVMX_CIU_WDOGX(cpu), ciu_wdog.u64);
-#endif
-
while (per_cpu(cpu_state, cpu) != CPU_DEAD)
cpu_relax();
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index c2f06e3..0583bb2 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Wed Jul 2 17:02:55 2008
+# Linux kernel version: 2.6.34-rc3
+# Sat Apr 3 16:32:11 2010
#
CONFIG_MIPS=y
@@ -9,20 +9,25 @@
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_NEC_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
@@ -36,10 +41,13 @@
# CONFIG_SIBYTE_SENTOSA is not set
CONFIG_SIBYTE_BIGSUR=y
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
CONFIG_SIBYTE_BCM1x80=y
CONFIG_SIBYTE_SB1xxx_SOC=y
# CONFIG_CPU_SB1_PASS_1 is not set
@@ -48,14 +56,13 @@
# CONFIG_CPU_SB1_PASS_4 is not set
# CONFIG_CPU_SB1_PASS_2_112x is not set
# CONFIG_CPU_SB1_PASS_3 is not set
-# CONFIG_SIMULATION is not set
# CONFIG_SB1_CEX_ALWAYS_FATAL is not set
# CONFIG_SB1_CERR_STALL is not set
-CONFIG_SIBYTE_CFE=y
# CONFIG_SIBYTE_CFE_CONSOLE is not set
# CONFIG_SIBYTE_BUS_WATCHER is not set
# CONFIG_SIBYTE_TBPROF is not set
CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y
+CONFIG_LOONGSON_UART_BASE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -66,15 +73,13 @@
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_CEVT_BCM1480=y
CONFIG_CSRC_BCM1480=y
CONFIG_CFE=y
CONFIG_DMA_COHERENT=y
-CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
# CONFIG_NO_IOPORT is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
@@ -88,7 +93,8 @@
#
# CPU selection
#
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
@@ -101,6 +107,7 @@
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
@@ -108,6 +115,7 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
CONFIG_CPU_SB1=y
+# CONFIG_CPU_CAVIUM_OCTEON is not set
CONFIG_SYS_HAS_CPU_SB1=y
CONFIG_WEAK_ORDERING=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
@@ -123,11 +131,13 @@
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_SIBYTE_DMA_PAGEOPS is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
@@ -142,18 +152,17 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_SMP=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_NR_CPUS_DEFAULT_4=y
CONFIG_NR_CPUS=4
-# CONFIG_MIPS_CMP is not set
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
@@ -175,6 +184,7 @@
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -188,6 +198,7 @@
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
@@ -195,23 +206,39 @@
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
@@ -222,29 +249,36 @@
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -252,26 +286,52 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -280,8 +340,9 @@
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
CONFIG_MMU=y
CONFIG_ZONE_DMA32=y
# CONFIG_PCCARD is not set
@@ -291,6 +352,8 @@
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
@@ -304,23 +367,20 @@
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
-
-#
-# Networking
-#
+# CONFIG_PM_RUNTIME is not set
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
@@ -353,7 +413,57 @@
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+# CONFIG_IPV6_MROUTE is not set
+CONFIG_NETLABEL=y
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
@@ -362,8 +472,10 @@
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
@@ -383,57 +495,11 @@
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=m
@@ -459,22 +525,44 @@
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP_DCCP is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=y
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
+CONFIG_SCTP_HMAC_SHA1=y
+# CONFIG_SCTP_HMAC_MD5 is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
+CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
@@ -482,26 +570,47 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+CONFIG_AX25_DAMA_SLAVE=y
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_YAM=m
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
#
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -513,9 +622,12 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -530,33 +642,53 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=m
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+CONFIG_EEPROM_MAX6875=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=y
-CONFIG_BLK_DEV_IDEFLOPPY=y
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
@@ -581,14 +713,13 @@
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
CONFIG_BLK_DEV_IT8213=m
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
@@ -600,14 +731,12 @@
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_BLK_DEV_IDE_SWARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -625,10 +754,6 @@
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -645,27 +770,36 @@
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -676,9 +810,15 @@
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_SIL24=y
@@ -700,6 +840,7 @@
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
@@ -715,6 +856,7 @@
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@@ -725,14 +867,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_SIL680=y
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -745,13 +889,16 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -774,6 +921,9 @@
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -783,23 +933,33 @@
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -811,29 +971,42 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
+CONFIG_MDIO=m
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
+CONFIG_WLAN=y
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -856,6 +1029,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -873,6 +1047,7 @@
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -893,8 +1068,6 @@
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
@@ -911,7 +1084,9 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
@@ -923,89 +1098,99 @@
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-CONFIG_I2C_SIBYTE=y
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
#
-# Miscellaneous I2C Chip support
+# I2C system bus drivers (mostly embedded / system-on-chip)
#
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=y
-CONFIG_SENSORS_PCF8574=y
-# CONFIG_PCF8575 is not set
-CONFIG_SENSORS_PCF8591=y
-CONFIG_EEPROM_MAX6875=y
-# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_SIBYTE=y
+# CONFIG_I2C_STUB is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
-CONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1016,10 +1201,6 @@
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
@@ -1030,9 +1211,18 @@
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
@@ -1040,41 +1230,66 @@
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_FS_XIP=y
+CONFIG_JBD=m
+CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
@@ -1103,15 +1318,13 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
@@ -1120,9 +1333,12 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -1133,16 +1349,17 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1205,12 +1422,18 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1219,23 +1442,53 @@
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SB1XXX_CORELIS is not set
@@ -1246,20 +1499,50 @@
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+CONFIG_LSM_MMAP_MIN_ADDR=65536
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
+# CONFIG_CRYPTO_PCRYPT is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
@@ -1276,7 +1559,7 @@
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
-# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
@@ -1287,14 +1570,20 @@
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
#
# Digest
#
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
@@ -1325,25 +1614,36 @@
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/include/asm/abi.h b/arch/mips/include/asm/abi.h
index 1dd74fb..9252d9b 100644
--- a/arch/mips/include/asm/abi.h
+++ b/arch/mips/include/asm/abi.h
@@ -13,12 +13,14 @@
#include <asm/siginfo.h>
struct mips_abi {
- int (* const setup_frame)(struct k_sigaction * ka,
+ int (* const setup_frame)(void *sig_return, struct k_sigaction *ka,
struct pt_regs *regs, int signr,
sigset_t *set);
- int (* const setup_rt_frame)(struct k_sigaction * ka,
+ const unsigned long signal_return_offset;
+ int (* const setup_rt_frame)(void *sig_return, struct k_sigaction *ka,
struct pt_regs *regs, int signr,
sigset_t *set, siginfo_t *info);
+ const unsigned long rt_signal_return_offset;
const unsigned long restart;
};
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index e53d7be..ea77a42 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -310,6 +310,7 @@
#endif /* CONFIG_64BIT */
+struct pt_regs;
struct task_struct;
extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs);
@@ -367,4 +368,8 @@
#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2)
#endif
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+ int uses_interp);
#endif /* _ASM_ELF_H */
diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h
index aecada6..3b40927 100644
--- a/arch/mips/include/asm/fpu_emulator.h
+++ b/arch/mips/include/asm/fpu_emulator.h
@@ -41,7 +41,11 @@
DECLARE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
#define MIPS_FPU_EMU_INC_STATS(M) \
- cpu_local_wrap(__local_inc(&__get_cpu_var(fpuemustats).M))
+do { \
+ preempt_disable(); \
+ __local_inc(&__get_cpu_var(fpuemustats).M); \
+ preempt_enable(); \
+} while (0)
#else
#define MIPS_FPU_EMU_INC_STATS(M) do { } while (0)
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
index b12c4ac..96a2391 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
@@ -85,6 +85,7 @@
RSET_TIMER,
RSET_WDT,
RSET_UART0,
+ RSET_UART1,
RSET_GPIO,
RSET_SPI,
RSET_UDC0,
@@ -123,6 +124,7 @@
#define BCM_6338_TIMER_BASE (0xfffe0200)
#define BCM_6338_WDT_BASE (0xfffe021c)
#define BCM_6338_UART0_BASE (0xfffe0300)
+#define BCM_6338_UART1_BASE (0xdeadbeef)
#define BCM_6338_GPIO_BASE (0xfffe0400)
#define BCM_6338_SPI_BASE (0xfffe0c00)
#define BCM_6338_UDC0_BASE (0xdeadbeef)
@@ -153,6 +155,7 @@
#define BCM_6345_TIMER_BASE (0xfffe0200)
#define BCM_6345_WDT_BASE (0xfffe021c)
#define BCM_6345_UART0_BASE (0xfffe0300)
+#define BCM_6345_UART1_BASE (0xdeadbeef)
#define BCM_6345_GPIO_BASE (0xfffe0400)
#define BCM_6345_SPI_BASE (0xdeadbeef)
#define BCM_6345_UDC0_BASE (0xdeadbeef)
@@ -182,6 +185,7 @@
#define BCM_6348_TIMER_BASE (0xfffe0200)
#define BCM_6348_WDT_BASE (0xfffe021c)
#define BCM_6348_UART0_BASE (0xfffe0300)
+#define BCM_6348_UART1_BASE (0xdeadbeef)
#define BCM_6348_GPIO_BASE (0xfffe0400)
#define BCM_6348_SPI_BASE (0xfffe0c00)
#define BCM_6348_UDC0_BASE (0xfffe1000)
@@ -208,6 +212,7 @@
#define BCM_6358_TIMER_BASE (0xfffe0040)
#define BCM_6358_WDT_BASE (0xfffe005c)
#define BCM_6358_UART0_BASE (0xfffe0100)
+#define BCM_6358_UART1_BASE (0xfffe0120)
#define BCM_6358_GPIO_BASE (0xfffe0080)
#define BCM_6358_SPI_BASE (0xdeadbeef)
#define BCM_6358_UDC0_BASE (0xfffe0800)
@@ -246,6 +251,8 @@
return BCM_6338_WDT_BASE;
case RSET_UART0:
return BCM_6338_UART0_BASE;
+ case RSET_UART1:
+ return BCM_6338_UART1_BASE;
case RSET_GPIO:
return BCM_6338_GPIO_BASE;
case RSET_SPI:
@@ -292,6 +299,8 @@
return BCM_6345_WDT_BASE;
case RSET_UART0:
return BCM_6345_UART0_BASE;
+ case RSET_UART1:
+ return BCM_6345_UART1_BASE;
case RSET_GPIO:
return BCM_6345_GPIO_BASE;
case RSET_SPI:
@@ -338,6 +347,8 @@
return BCM_6348_WDT_BASE;
case RSET_UART0:
return BCM_6348_UART0_BASE;
+ case RSET_UART1:
+ return BCM_6348_UART1_BASE;
case RSET_GPIO:
return BCM_6348_GPIO_BASE;
case RSET_SPI:
@@ -384,6 +395,8 @@
return BCM_6358_WDT_BASE;
case RSET_UART0:
return BCM_6358_UART0_BASE;
+ case RSET_UART1:
+ return BCM_6358_UART1_BASE;
case RSET_GPIO:
return BCM_6358_GPIO_BASE;
case RSET_SPI:
@@ -429,6 +442,7 @@
enum bcm63xx_irq {
IRQ_TIMER = 0,
IRQ_UART0,
+ IRQ_UART1,
IRQ_DSL,
IRQ_ENET0,
IRQ_ENET1,
@@ -510,6 +524,7 @@
*/
#define BCM_6358_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
#define BCM_6358_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
+#define BCM_6358_UART1_IRQ (IRQ_INTERNAL_BASE + 3)
#define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5)
#define BCM_6358_ENET1_IRQ (IRQ_INTERNAL_BASE + 6)
#define BCM_6358_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
new file mode 100644
index 0000000..23c705b
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
@@ -0,0 +1,6 @@
+#ifndef BCM63XX_DEV_UART_H_
+#define BCM63XX_DEV_UART_H_
+
+int bcm63xx_uart_register(unsigned int id);
+
+#endif /* BCM63XX_DEV_UART_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
index 76a0b72..43d4da0 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
@@ -10,6 +10,10 @@
switch (bcm63xx_get_cpu_id()) {
case BCM6358_CPU_ID:
return 40;
+ case BCM6338_CPU_ID:
+ return 8;
+ case BCM6345_CPU_ID:
+ return 16;
case BCM6348_CPU_ID:
default:
return 37;
diff --git a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
index 6479090..474daaa 100644
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
@@ -45,6 +45,8 @@
unsigned int has_ohci0:1;
unsigned int has_ehci0:1;
unsigned int has_dsp:1;
+ unsigned int has_uart0:1;
+ unsigned int has_uart1:1;
/* ethernet config */
struct bcm63xx_enet_platform_data enet0;
diff --git a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
index 71742bac..f453c01 100644
--- a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
@@ -24,7 +24,7 @@
#define cpu_has_smartmips 0
#define cpu_has_vtag_icache 0
-#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCMCPU_IS_6348) || defined(CONFIG_CPU_IS_6338) || defined(CONFIG_CPU_IS_BCM6345))
+#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCM63XX_CPU_6348) || defined(CONFIG_BCM63XX_CPU_6345) || defined(CONFIG_BCM63XX_CPU_6338))
#define cpu_has_dc_aliases 0
#endif
diff --git a/arch/mips/include/asm/mach-sibyte/war.h b/arch/mips/include/asm/mach-sibyte/war.h
index 7950ef4..743385d 100644
--- a/arch/mips/include/asm/mach-sibyte/war.h
+++ b/arch/mips/include/asm/mach-sibyte/war.h
@@ -16,7 +16,11 @@
#if defined(CONFIG_SB1_PASS_1_WORKAROUNDS) || \
defined(CONFIG_SB1_PASS_2_WORKAROUNDS)
-#define BCM1250_M3_WAR 1
+#ifndef __ASSEMBLY__
+extern int sb1250_m3_workaround_needed(void);
+#endif
+
+#define BCM1250_M3_WAR sb1250_m3_workaround_needed()
#define SIBYTE_1956_WAR 1
#else
diff --git a/arch/mips/include/asm/mmu.h b/arch/mips/include/asm/mmu.h
index 4063edd..c436138 100644
--- a/arch/mips/include/asm/mmu.h
+++ b/arch/mips/include/asm/mmu.h
@@ -1,6 +1,9 @@
#ifndef __ASM_MMU_H
#define __ASM_MMU_H
-typedef unsigned long mm_context_t[NR_CPUS];
+typedef struct {
+ unsigned long asid[NR_CPUS];
+ void *vdso;
+} mm_context_t;
#endif /* __ASM_MMU_H */
diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h
index 145bb81..d959273 100644
--- a/arch/mips/include/asm/mmu_context.h
+++ b/arch/mips/include/asm/mmu_context.h
@@ -104,7 +104,7 @@
#endif
-#define cpu_context(cpu, mm) ((mm)->context[cpu])
+#define cpu_context(cpu, mm) ((mm)->context.asid[cpu])
#define cpu_asid(cpu, mm) (cpu_context((cpu), (mm)) & ASID_MASK)
#define asid_cache(cpu) (cpu_data[cpu].asid_cache)
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index ac32572..a16beaf 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -188,8 +188,10 @@
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE)
-#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET)
+#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \
+ PHYS_OFFSET)
+#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \
+ PHYS_OFFSET)
#include <asm-generic/memory_model.h>
#include <asm-generic/getorder.h>
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index 087a888..ab38791 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -33,13 +33,19 @@
extern unsigned int vced_count, vcei_count;
+/*
+ * A special page (the vdso) is mapped into all processes at the very
+ * top of the virtual memory space.
+ */
+#define SPECIAL_PAGES_SIZE PAGE_SIZE
+
#ifdef CONFIG_32BIT
/*
* User space process size: 2GB. This is hardcoded into a few places,
* so don't change it unless you know what you are doing.
*/
#define TASK_SIZE 0x7fff8000UL
-#define STACK_TOP TASK_SIZE
+#define STACK_TOP ((TASK_SIZE & PAGE_MASK) - SPECIAL_PAGES_SIZE)
/*
* This decides where the kernel will search for a free chunk of vm
@@ -59,7 +65,8 @@
#define TASK_SIZE32 0x7fff8000UL
#define TASK_SIZE 0x10000000000UL
#define STACK_TOP \
- (test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE)
+ (((test_thread_flag(TIF_32BIT_ADDR) ? \
+ TASK_SIZE32 : TASK_SIZE) & PAGE_MASK) - SPECIAL_PAGES_SIZE)
/*
* This decides where the kernel will search for a free chunk of vm
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index 3b6da33..c841912 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -121,6 +121,25 @@
.endm
#else
.macro get_saved_sp /* Uniprocessor variation */
+#ifdef CONFIG_CPU_LOONGSON2F
+ /*
+ * Clear BTB (branch target buffer), forbid RAS (return address
+ * stack) to workaround the Out-of-order Issue in Loongson2F
+ * via its diagnostic register.
+ */
+ move k0, ra
+ jal 1f
+ nop
+1: jal 1f
+ nop
+1: jal 1f
+ nop
+1: jal 1f
+ nop
+1: move ra, k0
+ li k0, 3
+ mtc0 k0, $22
+#endif /* CONFIG_CPU_LOONGSON2F */
#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
lui k1, %hi(kernelsp)
#else
diff --git a/arch/mips/include/asm/uasm.h b/arch/mips/include/asm/uasm.h
index b99bd07..11a8b52 100644
--- a/arch/mips/include/asm/uasm.h
+++ b/arch/mips/include/asm/uasm.h
@@ -84,6 +84,7 @@
Ip_u1u2u3(_mfc0);
Ip_u1u2u3(_mtc0);
Ip_u2u1u3(_ori);
+Ip_u3u1u2(_or);
Ip_u2s3u1(_pref);
Ip_0(_rfe);
Ip_u2s3u1(_sc);
@@ -102,6 +103,7 @@
Ip_u3u1u2(_xor);
Ip_u2u1u3(_xori);
Ip_u2u1msbu3(_dins);
+Ip_u1(_syscall);
/* Handle labels. */
struct uasm_label {
diff --git a/arch/mips/include/asm/vdso.h b/arch/mips/include/asm/vdso.h
new file mode 100644
index 0000000..cca56aa
--- /dev/null
+++ b/arch/mips/include/asm/vdso.h
@@ -0,0 +1,29 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Cavium Networks
+ */
+
+#ifndef __ASM_VDSO_H
+#define __ASM_VDSO_H
+
+#include <linux/types.h>
+
+
+#ifdef CONFIG_32BIT
+struct mips_vdso {
+ u32 signal_trampoline[2];
+ u32 rt_signal_trampoline[2];
+};
+#else /* !CONFIG_32BIT */
+struct mips_vdso {
+ u32 o32_signal_trampoline[2];
+ u32 o32_rt_signal_trampoline[2];
+ u32 rt_signal_trampoline[2];
+ u32 n32_rt_signal_trampoline[2];
+};
+#endif /* CONFIG_32BIT */
+
+#endif /* __ASM_VDSO_H */
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index ef20957..7a6ac50 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -6,7 +6,7 @@
obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \
ptrace.o reset.o setup.o signal.o syscall.o \
- time.o topology.o traps.o unaligned.o watch.o
+ time.o topology.o traps.o unaligned.o watch.o vdso.o
ifdef CONFIG_FUNCTION_TRACER
CFLAGS_REMOVE_ftrace.o = -pg
diff --git a/arch/mips/kernel/cpufreq/loongson2_clock.c b/arch/mips/kernel/cpufreq/loongson2_clock.c
index d7ca256..cefc6e2 100644
--- a/arch/mips/kernel/cpufreq/loongson2_clock.c
+++ b/arch/mips/kernel/cpufreq/loongson2_clock.c
@@ -164,3 +164,7 @@
spin_unlock_irqrestore(&loongson2_wait_lock, flags);
}
EXPORT_SYMBOL_GPL(loongson2_cpu_wait);
+
+MODULE_AUTHOR("Yanhua <yanh@lemote.com>");
+MODULE_DESCRIPTION("cpufreq driver for Loongson 2F");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 463b71b..9996094 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -63,8 +63,13 @@
smtc_idle_loop_hook();
#endif
- if (cpu_wait)
+
+ if (cpu_wait) {
+ /* Don't trace irqs off for idle */
+ stop_critical_timings();
(*cpu_wait)();
+ start_critical_timings();
+ }
}
#ifdef CONFIG_HOTPLUG_CPU
if (!cpu_online(cpu) && !cpu_isset(cpu, cpu_callin_map) &&
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
index 6c8e8c4..10263b4 100644
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@@ -26,11 +26,6 @@
*/
extern void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
size_t frame_size);
-/*
- * install trampoline code to get back from the sig handler
- */
-extern int install_sigtramp(unsigned int __user *tramp, unsigned int syscall);
-
/* Check and clear pending FPU exceptions in saved CSR */
extern int fpcsr_pending(unsigned int __user *fpcsr);
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index d0c68b5..2099d5a 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -32,6 +32,7 @@
#include <asm/ucontext.h>
#include <asm/cpu-features.h>
#include <asm/war.h>
+#include <asm/vdso.h>
#include "signal-common.h"
@@ -44,47 +45,20 @@
extern asmlinkage int fpu_emulator_save_context(struct sigcontext __user *sc);
extern asmlinkage int fpu_emulator_restore_context(struct sigcontext __user *sc);
-/*
- * Horribly complicated - with the bloody RM9000 workarounds enabled
- * the signal trampolines is moving to the end of the structure so we can
- * increase the alignment without breaking software compatibility.
- */
-#if ICACHE_REFILLS_WORKAROUND_WAR == 0
-
struct sigframe {
u32 sf_ass[4]; /* argument save space for o32 */
- u32 sf_code[2]; /* signal trampoline */
+ u32 sf_pad[2]; /* Was: signal trampoline */
struct sigcontext sf_sc;
sigset_t sf_mask;
};
struct rt_sigframe {
u32 rs_ass[4]; /* argument save space for o32 */
- u32 rs_code[2]; /* signal trampoline */
+ u32 rs_pad[2]; /* Was: signal trampoline */
struct siginfo rs_info;
struct ucontext rs_uc;
};
-#else
-
-struct sigframe {
- u32 sf_ass[4]; /* argument save space for o32 */
- u32 sf_pad[2];
- struct sigcontext sf_sc; /* hw context */
- sigset_t sf_mask;
- u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */
-};
-
-struct rt_sigframe {
- u32 rs_ass[4]; /* argument save space for o32 */
- u32 rs_pad[2];
- struct siginfo rs_info;
- struct ucontext rs_uc;
- u32 rs_code[8] ____cacheline_aligned; /* signal trampoline */
-};
-
-#endif
-
/*
* Helper routines
*/
@@ -266,32 +240,6 @@
return (void __user *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? ~(cpu_icache_line_size()-1) : ALMASK));
}
-int install_sigtramp(unsigned int __user *tramp, unsigned int syscall)
-{
- int err;
-
- /*
- * Set up the return code ...
- *
- * li v0, __NR__foo_sigreturn
- * syscall
- */
-
- err = __put_user(0x24020000 + syscall, tramp + 0);
- err |= __put_user(0x0000000c , tramp + 1);
- if (ICACHE_REFILLS_WORKAROUND_WAR) {
- err |= __put_user(0, tramp + 2);
- err |= __put_user(0, tramp + 3);
- err |= __put_user(0, tramp + 4);
- err |= __put_user(0, tramp + 5);
- err |= __put_user(0, tramp + 6);
- err |= __put_user(0, tramp + 7);
- }
- flush_cache_sigtramp((unsigned long) tramp);
-
- return err;
-}
-
/*
* Atomically swap in the new signal mask, and wait for a signal.
*/
@@ -484,8 +432,8 @@
}
#ifdef CONFIG_TRAD_SIGNALS
-static int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
- int signr, sigset_t *set)
+static int setup_frame(void *sig_return, struct k_sigaction *ka,
+ struct pt_regs *regs, int signr, sigset_t *set)
{
struct sigframe __user *frame;
int err = 0;
@@ -494,8 +442,6 @@
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
goto give_sigsegv;
- err |= install_sigtramp(frame->sf_code, __NR_sigreturn);
-
err |= setup_sigcontext(regs, &frame->sf_sc);
err |= __copy_to_user(&frame->sf_mask, set, sizeof(*set));
if (err)
@@ -515,7 +461,7 @@
regs->regs[ 5] = 0;
regs->regs[ 6] = (unsigned long) &frame->sf_sc;
regs->regs[29] = (unsigned long) frame;
- regs->regs[31] = (unsigned long) frame->sf_code;
+ regs->regs[31] = (unsigned long) sig_return;
regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler;
DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
@@ -529,8 +475,9 @@
}
#endif
-static int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
- int signr, sigset_t *set, siginfo_t *info)
+static int setup_rt_frame(void *sig_return, struct k_sigaction *ka,
+ struct pt_regs *regs, int signr, sigset_t *set,
+ siginfo_t *info)
{
struct rt_sigframe __user *frame;
int err = 0;
@@ -539,8 +486,6 @@
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
goto give_sigsegv;
- err |= install_sigtramp(frame->rs_code, __NR_rt_sigreturn);
-
/* Create siginfo. */
err |= copy_siginfo_to_user(&frame->rs_info, info);
@@ -573,7 +518,7 @@
regs->regs[ 5] = (unsigned long) &frame->rs_info;
regs->regs[ 6] = (unsigned long) &frame->rs_uc;
regs->regs[29] = (unsigned long) frame;
- regs->regs[31] = (unsigned long) frame->rs_code;
+ regs->regs[31] = (unsigned long) sig_return;
regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler;
DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
@@ -590,8 +535,11 @@
struct mips_abi mips_abi = {
#ifdef CONFIG_TRAD_SIGNALS
.setup_frame = setup_frame,
+ .signal_return_offset = offsetof(struct mips_vdso, signal_trampoline),
#endif
.setup_rt_frame = setup_rt_frame,
+ .rt_signal_return_offset =
+ offsetof(struct mips_vdso, rt_signal_trampoline),
.restart = __NR_restart_syscall
};
@@ -599,6 +547,8 @@
struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs)
{
int ret;
+ struct mips_abi *abi = current->thread.abi;
+ void *vdso = current->mm->context.vdso;
switch(regs->regs[0]) {
case ERESTART_RESTARTBLOCK:
@@ -619,9 +569,11 @@
regs->regs[0] = 0; /* Don't deal with this again. */
if (sig_uses_siginfo(ka))
- ret = current->thread.abi->setup_rt_frame(ka, regs, sig, oldset, info);
+ ret = abi->setup_rt_frame(vdso + abi->rt_signal_return_offset,
+ ka, regs, sig, oldset, info);
else
- ret = current->thread.abi->setup_frame(ka, regs, sig, oldset);
+ ret = abi->setup_frame(vdso + abi->signal_return_offset,
+ ka, regs, sig, oldset);
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask);
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 03abaf0..a0ed0e0 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -32,6 +32,7 @@
#include <asm/system.h>
#include <asm/fpu.h>
#include <asm/war.h>
+#include <asm/vdso.h>
#include "signal-common.h"
@@ -47,8 +48,6 @@
/*
* Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
*/
-#define __NR_O32_sigreturn 4119
-#define __NR_O32_rt_sigreturn 4193
#define __NR_O32_restart_syscall 4253
/* 32-bit compatibility types */
@@ -77,47 +76,20 @@
compat_sigset_t uc_sigmask; /* mask last for extensibility */
};
-/*
- * Horribly complicated - with the bloody RM9000 workarounds enabled
- * the signal trampolines is moving to the end of the structure so we can
- * increase the alignment without breaking software compatibility.
- */
-#if ICACHE_REFILLS_WORKAROUND_WAR == 0
-
struct sigframe32 {
u32 sf_ass[4]; /* argument save space for o32 */
- u32 sf_code[2]; /* signal trampoline */
+ u32 sf_pad[2]; /* Was: signal trampoline */
struct sigcontext32 sf_sc;
compat_sigset_t sf_mask;
};
struct rt_sigframe32 {
u32 rs_ass[4]; /* argument save space for o32 */
- u32 rs_code[2]; /* signal trampoline */
+ u32 rs_pad[2]; /* Was: signal trampoline */
compat_siginfo_t rs_info;
struct ucontext32 rs_uc;
};
-#else /* ICACHE_REFILLS_WORKAROUND_WAR */
-
-struct sigframe32 {
- u32 sf_ass[4]; /* argument save space for o32 */
- u32 sf_pad[2];
- struct sigcontext32 sf_sc; /* hw context */
- compat_sigset_t sf_mask;
- u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */
-};
-
-struct rt_sigframe32 {
- u32 rs_ass[4]; /* argument save space for o32 */
- u32 rs_pad[2];
- compat_siginfo_t rs_info;
- struct ucontext32 rs_uc;
- u32 rs_code[8] __attribute__((aligned(32))); /* signal trampoline */
-};
-
-#endif /* !ICACHE_REFILLS_WORKAROUND_WAR */
-
/*
* sigcontext handlers
*/
@@ -598,8 +570,8 @@
force_sig(SIGSEGV, current);
}
-static int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
- int signr, sigset_t *set)
+static int setup_frame_32(void *sig_return, struct k_sigaction *ka,
+ struct pt_regs *regs, int signr, sigset_t *set)
{
struct sigframe32 __user *frame;
int err = 0;
@@ -608,8 +580,6 @@
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
goto give_sigsegv;
- err |= install_sigtramp(frame->sf_code, __NR_O32_sigreturn);
-
err |= setup_sigcontext32(regs, &frame->sf_sc);
err |= __copy_conv_sigset_to_user(&frame->sf_mask, set);
@@ -630,7 +600,7 @@
regs->regs[ 5] = 0;
regs->regs[ 6] = (unsigned long) &frame->sf_sc;
regs->regs[29] = (unsigned long) frame;
- regs->regs[31] = (unsigned long) frame->sf_code;
+ regs->regs[31] = (unsigned long) sig_return;
regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler;
DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
@@ -644,8 +614,9 @@
return -EFAULT;
}
-static int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
- int signr, sigset_t *set, siginfo_t *info)
+static int setup_rt_frame_32(void *sig_return, struct k_sigaction *ka,
+ struct pt_regs *regs, int signr, sigset_t *set,
+ siginfo_t *info)
{
struct rt_sigframe32 __user *frame;
int err = 0;
@@ -655,8 +626,6 @@
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
goto give_sigsegv;
- err |= install_sigtramp(frame->rs_code, __NR_O32_rt_sigreturn);
-
/* Convert (siginfo_t -> compat_siginfo_t) and copy to user. */
err |= copy_siginfo_to_user32(&frame->rs_info, info);
@@ -690,7 +659,7 @@
regs->regs[ 5] = (unsigned long) &frame->rs_info;
regs->regs[ 6] = (unsigned long) &frame->rs_uc;
regs->regs[29] = (unsigned long) frame;
- regs->regs[31] = (unsigned long) frame->rs_code;
+ regs->regs[31] = (unsigned long) sig_return;
regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler;
DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
@@ -709,7 +678,11 @@
*/
struct mips_abi mips_abi_32 = {
.setup_frame = setup_frame_32,
+ .signal_return_offset =
+ offsetof(struct mips_vdso, o32_signal_trampoline),
.setup_rt_frame = setup_rt_frame_32,
+ .rt_signal_return_offset =
+ offsetof(struct mips_vdso, o32_rt_signal_trampoline),
.restart = __NR_O32_restart_syscall
};
diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c
index bb277e8..2c5df81 100644
--- a/arch/mips/kernel/signal_n32.c
+++ b/arch/mips/kernel/signal_n32.c
@@ -39,13 +39,13 @@
#include <asm/fpu.h>
#include <asm/cpu-features.h>
#include <asm/war.h>
+#include <asm/vdso.h>
#include "signal-common.h"
/*
* Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
*/
-#define __NR_N32_rt_sigreturn 6211
#define __NR_N32_restart_syscall 6214
extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *);
@@ -67,27 +67,13 @@
compat_sigset_t uc_sigmask; /* mask last for extensibility */
};
-#if ICACHE_REFILLS_WORKAROUND_WAR == 0
-
struct rt_sigframe_n32 {
u32 rs_ass[4]; /* argument save space for o32 */
- u32 rs_code[2]; /* signal trampoline */
+ u32 rs_pad[2]; /* Was: signal trampoline */
struct compat_siginfo rs_info;
struct ucontextn32 rs_uc;
};
-#else /* ICACHE_REFILLS_WORKAROUND_WAR */
-
-struct rt_sigframe_n32 {
- u32 rs_ass[4]; /* argument save space for o32 */
- u32 rs_pad[2];
- struct compat_siginfo rs_info;
- struct ucontextn32 rs_uc;
- u32 rs_code[8] ____cacheline_aligned; /* signal trampoline */
-};
-
-#endif /* !ICACHE_REFILLS_WORKAROUND_WAR */
-
extern void sigset_from_compat(sigset_t *set, compat_sigset_t *compat);
asmlinkage int sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
@@ -173,7 +159,7 @@
force_sig(SIGSEGV, current);
}
-static int setup_rt_frame_n32(struct k_sigaction * ka,
+static int setup_rt_frame_n32(void *sig_return, struct k_sigaction *ka,
struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info)
{
struct rt_sigframe_n32 __user *frame;
@@ -184,8 +170,6 @@
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
goto give_sigsegv;
- install_sigtramp(frame->rs_code, __NR_N32_rt_sigreturn);
-
/* Create siginfo. */
err |= copy_siginfo_to_user32(&frame->rs_info, info);
@@ -219,7 +203,7 @@
regs->regs[ 5] = (unsigned long) &frame->rs_info;
regs->regs[ 6] = (unsigned long) &frame->rs_uc;
regs->regs[29] = (unsigned long) frame;
- regs->regs[31] = (unsigned long) frame->rs_code;
+ regs->regs[31] = (unsigned long) sig_return;
regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler;
DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
@@ -235,5 +219,7 @@
struct mips_abi mips_abi_n32 = {
.setup_rt_frame = setup_rt_frame_n32,
+ .rt_signal_return_offset =
+ offsetof(struct mips_vdso, n32_rt_signal_trampoline),
.restart = __NR_N32_restart_syscall
};
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 25e825a..a95dea5 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -182,7 +182,7 @@
{0, 0, 0, 0, 0, 0, 0, 1}
};
int tcnoprog[NR_CPUS];
-static atomic_t idle_hook_initialized = {0};
+static atomic_t idle_hook_initialized = ATOMIC_INIT(0);
static int clock_hang_reported[NR_CPUS];
#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 9587abc..dd81b0f 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -79,7 +79,11 @@
int do_color_align;
unsigned long task_size;
- task_size = STACK_TOP;
+#ifdef CONFIG_32BIT
+ task_size = TASK_SIZE;
+#else /* Must be CONFIG_64BIT*/
+ task_size = test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE;
+#endif
if (len > task_size)
return -ENOMEM;
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 4e00f9b..1a4dd65 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1599,7 +1599,7 @@
ebase = (unsigned long)
__alloc_bootmem(size, 1 << fls(size), 0);
} else {
- ebase = CAC_BASE;
+ ebase = CKSEG0;
if (cpu_has_mips_r2)
ebase += (read_c0_ebase() & 0x3ffff000);
}
diff --git a/arch/mips/kernel/vdso.c b/arch/mips/kernel/vdso.c
new file mode 100644
index 0000000..b773c11
--- /dev/null
+++ b/arch/mips/kernel/vdso.c
@@ -0,0 +1,112 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009, 2010 Cavium Networks, Inc.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/binfmts.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/unistd.h>
+
+#include <asm/vdso.h>
+#include <asm/uasm.h>
+
+/*
+ * Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
+ */
+#define __NR_O32_sigreturn 4119
+#define __NR_O32_rt_sigreturn 4193
+#define __NR_N32_rt_sigreturn 6211
+
+static struct page *vdso_page;
+
+static void __init install_trampoline(u32 *tramp, unsigned int sigreturn)
+{
+ uasm_i_addiu(&tramp, 2, 0, sigreturn); /* li v0, sigreturn */
+ uasm_i_syscall(&tramp, 0);
+}
+
+static int __init init_vdso(void)
+{
+ struct mips_vdso *vdso;
+
+ vdso_page = alloc_page(GFP_KERNEL);
+ if (!vdso_page)
+ panic("Cannot allocate vdso");
+
+ vdso = vmap(&vdso_page, 1, 0, PAGE_KERNEL);
+ if (!vdso)
+ panic("Cannot map vdso");
+ clear_page(vdso);
+
+ install_trampoline(vdso->rt_signal_trampoline, __NR_rt_sigreturn);
+#ifdef CONFIG_32BIT
+ install_trampoline(vdso->signal_trampoline, __NR_sigreturn);
+#else
+ install_trampoline(vdso->n32_rt_signal_trampoline,
+ __NR_N32_rt_sigreturn);
+ install_trampoline(vdso->o32_signal_trampoline, __NR_O32_sigreturn);
+ install_trampoline(vdso->o32_rt_signal_trampoline,
+ __NR_O32_rt_sigreturn);
+#endif
+
+ vunmap(vdso);
+
+ pr_notice("init_vdso successfull\n");
+
+ return 0;
+}
+device_initcall(init_vdso);
+
+static unsigned long vdso_addr(unsigned long start)
+{
+ return STACK_TOP;
+}
+
+int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
+{
+ int ret;
+ unsigned long addr;
+ struct mm_struct *mm = current->mm;
+
+ down_write(&mm->mmap_sem);
+
+ addr = vdso_addr(mm->start_stack);
+
+ addr = get_unmapped_area(NULL, addr, PAGE_SIZE, 0, 0);
+ if (IS_ERR_VALUE(addr)) {
+ ret = addr;
+ goto up_fail;
+ }
+
+ ret = install_special_mapping(mm, addr, PAGE_SIZE,
+ VM_READ|VM_EXEC|
+ VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
+ VM_ALWAYSDUMP,
+ &vdso_page);
+
+ if (ret)
+ goto up_fail;
+
+ mm->context.vdso = (void *)addr;
+
+up_fail:
+ up_write(&mm->mmap_sem);
+ return ret;
+}
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+ if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso)
+ return "[vdso]";
+ return NULL;
+}
diff --git a/arch/mips/lib/delay.c b/arch/mips/lib/delay.c
index 6b3b1de9..5995969 100644
--- a/arch/mips/lib/delay.c
+++ b/arch/mips/lib/delay.c
@@ -41,7 +41,7 @@
void __udelay(unsigned long us)
{
- unsigned int lpj = current_cpu_data.udelay_val;
+ unsigned int lpj = raw_current_cpu_data.udelay_val;
__delay((us * 0x000010c7ull * HZ * lpj) >> 32);
}
@@ -49,7 +49,7 @@
void __ndelay(unsigned long ns)
{
- unsigned int lpj = current_cpu_data.udelay_val;
+ unsigned int lpj = raw_current_cpu_data.udelay_val;
__delay((ns * 0x00000005ull * HZ * lpj) >> 32);
}
diff --git a/arch/mips/lib/libgcc.h b/arch/mips/lib/libgcc.h
index 3f19d1c..05909d58 100644
--- a/arch/mips/lib/libgcc.h
+++ b/arch/mips/lib/libgcc.h
@@ -17,8 +17,7 @@
#error I feel sick.
#endif
-typedef union
-{
+typedef union {
struct DWstruct s;
long long ll;
} DWunion;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index be8627b..12af739 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -133,7 +133,7 @@
}
unsigned long _page_cachable_default;
-EXPORT_SYMBOL_GPL(_page_cachable_default);
+EXPORT_SYMBOL(_page_cachable_default);
static inline void setup_protection_map(void)
{
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 0de0e41..d1f68aa 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -788,10 +788,15 @@
* create the plain linear handler
*/
if (bcm1250_m3_war()) {
- UASM_i_MFC0(&p, K0, C0_BADVADDR);
- UASM_i_MFC0(&p, K1, C0_ENTRYHI);
+ unsigned int segbits = 44;
+
+ uasm_i_dmfc0(&p, K0, C0_BADVADDR);
+ uasm_i_dmfc0(&p, K1, C0_ENTRYHI);
uasm_i_xor(&p, K0, K0, K1);
- UASM_i_SRL(&p, K0, K0, PAGE_SHIFT + 1);
+ uasm_i_dsrl32(&p, K1, K0, 62 - 32);
+ uasm_i_dsrl(&p, K0, K0, 12 + 1);
+ uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32);
+ uasm_i_or(&p, K0, K0, K1);
uasm_il_bnez(&p, &r, K0, label_leave);
/* No need for uasm_i_nop */
}
@@ -1312,10 +1317,15 @@
memset(relocs, 0, sizeof(relocs));
if (bcm1250_m3_war()) {
- UASM_i_MFC0(&p, K0, C0_BADVADDR);
- UASM_i_MFC0(&p, K1, C0_ENTRYHI);
+ unsigned int segbits = 44;
+
+ uasm_i_dmfc0(&p, K0, C0_BADVADDR);
+ uasm_i_dmfc0(&p, K1, C0_ENTRYHI);
uasm_i_xor(&p, K0, K0, K1);
- UASM_i_SRL(&p, K0, K0, PAGE_SHIFT + 1);
+ uasm_i_dsrl32(&p, K1, K0, 62 - 32);
+ uasm_i_dsrl(&p, K0, K0, 12 + 1);
+ uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32);
+ uasm_i_or(&p, K0, K0, K1);
uasm_il_bnez(&p, &r, K0, label_leave);
/* No need for uasm_i_nop */
}
diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
index 1581e98..611d564 100644
--- a/arch/mips/mm/uasm.c
+++ b/arch/mips/mm/uasm.c
@@ -31,7 +31,8 @@
BIMM = 0x040,
JIMM = 0x080,
FUNC = 0x100,
- SET = 0x200
+ SET = 0x200,
+ SCIMM = 0x400
};
#define OP_MASK 0x3f
@@ -52,6 +53,8 @@
#define FUNC_SH 0
#define SET_MASK 0x7
#define SET_SH 0
+#define SCIMM_MASK 0xfffff
+#define SCIMM_SH 6
enum opcode {
insn_invalid,
@@ -61,10 +64,10 @@
insn_dmtc0, insn_dsll, insn_dsll32, insn_dsra, insn_dsrl,
insn_dsrl32, insn_drotr, insn_dsubu, insn_eret, insn_j, insn_jal,
insn_jr, insn_ld, insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0,
- insn_mtc0, insn_ori, insn_pref, insn_rfe, insn_sc, insn_scd,
+ insn_mtc0, insn_or, insn_ori, insn_pref, insn_rfe, insn_sc, insn_scd,
insn_sd, insn_sll, insn_sra, insn_srl, insn_rotr, insn_subu, insn_sw,
insn_tlbp, insn_tlbr, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori,
- insn_dins
+ insn_dins, insn_syscall
};
struct insn {
@@ -117,6 +120,7 @@
{ insn_lw, M(lw_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_mfc0, M(cop0_op, mfc_op, 0, 0, 0, 0), RT | RD | SET},
{ insn_mtc0, M(cop0_op, mtc_op, 0, 0, 0, 0), RT | RD | SET},
+ { insn_or, M(spec_op, 0, 0, 0, 0, or_op), RS | RT | RD },
{ insn_ori, M(ori_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
{ insn_pref, M(pref_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_rfe, M(cop0_op, cop_op, 0, 0, 0, rfe_op), 0 },
@@ -136,6 +140,7 @@
{ insn_xor, M(spec_op, 0, 0, 0, 0, xor_op), RS | RT | RD },
{ insn_xori, M(xori_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
{ insn_dins, M(spec3_op, 0, 0, 0, 0, dins_op), RS | RT | RD | RE },
+ { insn_syscall, M(spec_op, 0, 0, 0, 0, syscall_op), SCIMM},
{ insn_invalid, 0, 0 }
};
@@ -208,6 +213,14 @@
return (arg >> 2) & JIMM_MASK;
}
+static inline __cpuinit u32 build_scimm(u32 arg)
+{
+ if (arg & ~SCIMM_MASK)
+ printk(KERN_WARNING "Micro-assembler field overflow\n");
+
+ return (arg & SCIMM_MASK) << SCIMM_SH;
+}
+
static inline __cpuinit u32 build_func(u32 arg)
{
if (arg & ~FUNC_MASK)
@@ -266,6 +279,8 @@
op |= build_func(va_arg(ap, u32));
if (ip->fields & SET)
op |= build_set(va_arg(ap, u32));
+ if (ip->fields & SCIMM)
+ op |= build_scimm(va_arg(ap, u32));
va_end(ap);
**buf = op;
@@ -373,6 +388,7 @@
I_u1u2u3(_mfc0)
I_u1u2u3(_mtc0)
I_u2u1u3(_ori)
+I_u3u1u2(_or)
I_u2s3u1(_pref)
I_0(_rfe)
I_u2s3u1(_sc)
@@ -391,6 +407,7 @@
I_u3u1u2(_xor)
I_u2u1u3(_xori)
I_u2u1msbu3(_dins);
+I_u1(_syscall);
/* Handle labels. */
void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid)
diff --git a/arch/mips/pci/ops-loongson2.c b/arch/mips/pci/ops-loongson2.c
index 2bb4057..d657ee0 100644
--- a/arch/mips/pci/ops-loongson2.c
+++ b/arch/mips/pci/ops-loongson2.c
@@ -180,15 +180,21 @@
};
#ifdef CONFIG_CS5536
+DEFINE_RAW_SPINLOCK(msr_lock);
+
void _rdmsr(u32 msr, u32 *hi, u32 *lo)
{
struct pci_bus bus = {
.number = PCI_BUS_CS5536
};
u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&msr_lock, flags);
loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
+ raw_spin_unlock_irqrestore(&msr_lock, flags);
}
EXPORT_SYMBOL(_rdmsr);
@@ -198,9 +204,13 @@
.number = PCI_BUS_CS5536
};
u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&msr_lock, flags);
loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
+ raw_spin_unlock_irqrestore(&msr_lock, flags);
}
EXPORT_SYMBOL(_wrmsr);
#endif
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
index 0444da1..92da315 100644
--- a/arch/mips/sibyte/sb1250/setup.c
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -87,6 +87,21 @@
return ret;
}
+int sb1250_m3_workaround_needed(void)
+{
+ switch (soc_type) {
+ case K_SYS_SOC_TYPE_BCM1250:
+ case K_SYS_SOC_TYPE_BCM1250_ALT:
+ case K_SYS_SOC_TYPE_BCM1250_ALT2:
+ case K_SYS_SOC_TYPE_BCM1125:
+ case K_SYS_SOC_TYPE_BCM1125H:
+ return soc_pass < K_SYS_REVISION_BCM1250_C0;
+
+ default:
+ return 0;
+ }
+}
+
static int __init setup_bcm112x(void)
{
int ret = 0;
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index f1dcd79..0e8d352 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -246,20 +246,12 @@
.pci_ops = &ssb_pcicore_pciops,
.io_resource = &ssb_pcicore_io_resource,
.mem_resource = &ssb_pcicore_mem_resource,
- .mem_offset = 0x24000000,
};
-static u32 ssb_pcicore_pcibus_iobase = 0x100;
-static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
-
/* This function is called when doing a pci_enable_device().
* We must first check if the device is a device on the PCI-core bridge. */
int ssb_pcicore_plat_dev_init(struct pci_dev *d)
{
- struct resource *res;
- int pos, size;
- u32 *base;
-
if (d->bus->ops != &ssb_pcicore_pciops) {
/* This is not a device on the PCI-core bridge. */
return -ENODEV;
@@ -268,27 +260,6 @@
ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
pci_name(d));
- /* Fix up resource bases */
- for (pos = 0; pos < 6; pos++) {
- res = &d->resource[pos];
- if (res->flags & IORESOURCE_IO)
- base = &ssb_pcicore_pcibus_iobase;
- else
- base = &ssb_pcicore_pcibus_membase;
- res->flags |= IORESOURCE_PCI_FIXED;
- if (res->end) {
- size = res->end - res->start + 1;
- if (*base & (size - 1))
- *base = (*base + size) & ~(size - 1);
- res->start = *base;
- res->end = res->start + size - 1;
- *base += size;
- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
- }
- /* Fix up PCI bridge BAR0 only */
- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
- break;
- }
/* Fix up interrupt lines */
d->irq = ssb_mips_irq(extpci_core->dev) + 2;
pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 9e23ffe..b34d32f 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -3235,7 +3235,8 @@
u64 bytes)
{
struct btrfs_space_info *data_sinfo;
- int ret = 0, committed = 0;
+ u64 used;
+ int ret = 0, committed = 0, flushed = 0;
/* make sure bytes are sectorsize aligned */
bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
@@ -3247,12 +3248,21 @@
again:
/* make sure we have enough space to handle the data first */
spin_lock(&data_sinfo->lock);
- if (data_sinfo->total_bytes - data_sinfo->bytes_used -
- data_sinfo->bytes_delalloc - data_sinfo->bytes_reserved -
- data_sinfo->bytes_pinned - data_sinfo->bytes_readonly -
- data_sinfo->bytes_may_use - data_sinfo->bytes_super < bytes) {
+ used = data_sinfo->bytes_used + data_sinfo->bytes_delalloc +
+ data_sinfo->bytes_reserved + data_sinfo->bytes_pinned +
+ data_sinfo->bytes_readonly + data_sinfo->bytes_may_use +
+ data_sinfo->bytes_super;
+
+ if (used + bytes > data_sinfo->total_bytes) {
struct btrfs_trans_handle *trans;
+ if (!flushed) {
+ spin_unlock(&data_sinfo->lock);
+ flush_delalloc(root, data_sinfo);
+ flushed = 1;
+ goto again;
+ }
+
/*
* if we don't have enough free bytes in this space then we need
* to alloc a new chunk.
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index aa7dc36..8db7b14 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -2250,6 +2250,12 @@
if (!looped)
calc_size = max_t(u64, min_stripe_size, calc_size);
+ /*
+ * we're about to do_div by the stripe_len so lets make sure
+ * we end up with something bigger than a stripe
+ */
+ calc_size = max_t(u64, calc_size, stripe_len * 4);
+
do_div(calc_size, stripe_len);
calc_size *= stripe_len;
diff --git a/fs/ext2/symlink.c b/fs/ext2/symlink.c
index 4e2426e..565cf81 100644
--- a/fs/ext2/symlink.c
+++ b/fs/ext2/symlink.c
@@ -32,6 +32,7 @@
.readlink = generic_readlink,
.follow_link = page_follow_link_light,
.put_link = page_put_link,
+ .setattr = ext2_setattr,
#ifdef CONFIG_EXT2_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
@@ -43,6 +44,7 @@
const struct inode_operations ext2_fast_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = ext2_follow_link,
+ .setattr = ext2_setattr,
#ifdef CONFIG_EXT2_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
diff --git a/fs/ext3/symlink.c b/fs/ext3/symlink.c
index ff7b4cc..7c48982 100644
--- a/fs/ext3/symlink.c
+++ b/fs/ext3/symlink.c
@@ -34,6 +34,7 @@
.readlink = generic_readlink,
.follow_link = page_follow_link_light,
.put_link = page_put_link,
+ .setattr = ext3_setattr,
#ifdef CONFIG_EXT3_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
@@ -45,6 +46,7 @@
const struct inode_operations ext3_fast_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = ext3_follow_link,
+ .setattr = ext3_setattr,
#ifdef CONFIG_EXT3_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
diff --git a/fs/nilfs2/alloc.c b/fs/nilfs2/alloc.c
index 8d6356a..7cfb87e 100644
--- a/fs/nilfs2/alloc.c
+++ b/fs/nilfs2/alloc.c
@@ -426,7 +426,7 @@
bitmap = bitmap_kaddr + bh_offset(req->pr_bitmap_bh);
if (!nilfs_clear_bit_atomic(nilfs_mdt_bgl_lock(inode, group),
group_offset, bitmap))
- printk(KERN_WARNING "%s: entry numer %llu already freed\n",
+ printk(KERN_WARNING "%s: entry number %llu already freed\n",
__func__, (unsigned long long)req->pr_entry_nr);
nilfs_palloc_group_desc_add_entries(inode, group, desc, 1);
diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c
index 7cdd98b..76c38e3 100644
--- a/fs/nilfs2/btree.c
+++ b/fs/nilfs2/btree.c
@@ -1879,7 +1879,7 @@
struct nilfs_btree_path *path,
int level, struct buffer_head *bh)
{
- int maxlevel, ret;
+ int maxlevel = 0, ret;
struct nilfs_btree_node *parent;
struct inode *dat = nilfs_bmap_get_dat(&btree->bt_bmap);
__u64 ptr;
diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index c2ff1b3..f90a33d 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -649,7 +649,7 @@
long nilfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
struct inode *inode = filp->f_dentry->d_inode;
- void __user *argp = (void * __user *)arg;
+ void __user *argp = (void __user *)arg;
switch (cmd) {
case NILFS_IOCTL_CHANGE_CPMODE:
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index e0b870f..a0a9405 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -874,14 +874,18 @@
static void add_dquot_ref(struct super_block *sb, int type)
{
struct inode *inode, *old_inode = NULL;
+#ifdef __DQUOT_PARANOIA
int reserved = 0;
+#endif
spin_lock(&inode_lock);
list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE|I_NEW))
continue;
+#ifdef __DQUOT_PARANOIA
if (unlikely(inode_get_rsv_space(inode) > 0))
reserved = 1;
+#endif
if (!atomic_read(&inode->i_writecount))
continue;
if (!dqinit_needed(inode, type))
@@ -903,11 +907,13 @@
spin_unlock(&inode_lock);
iput(old_inode);
+#ifdef __DQUOT_PARANOIA
if (reserved) {
printk(KERN_WARNING "VFS (%s): Writes happened before quota"
" was turned on thus quota information is probably "
"inconsistent. Please run quotacheck(8).\n", sb->s_id);
}
+#endif
}
/*
@@ -2322,34 +2328,34 @@
if (di->dqb_valid & QIF_SPACE) {
dm->dqb_curspace = di->dqb_curspace - dm->dqb_rsvspace;
check_blim = 1;
- __set_bit(DQ_LASTSET_B + QIF_SPACE_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_SPACE_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_BLIMITS) {
dm->dqb_bsoftlimit = qbtos(di->dqb_bsoftlimit);
dm->dqb_bhardlimit = qbtos(di->dqb_bhardlimit);
check_blim = 1;
- __set_bit(DQ_LASTSET_B + QIF_BLIMITS_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_BLIMITS_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_INODES) {
dm->dqb_curinodes = di->dqb_curinodes;
check_ilim = 1;
- __set_bit(DQ_LASTSET_B + QIF_INODES_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_INODES_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_ILIMITS) {
dm->dqb_isoftlimit = di->dqb_isoftlimit;
dm->dqb_ihardlimit = di->dqb_ihardlimit;
check_ilim = 1;
- __set_bit(DQ_LASTSET_B + QIF_ILIMITS_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_ILIMITS_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_BTIME) {
dm->dqb_btime = di->dqb_btime;
check_blim = 1;
- __set_bit(DQ_LASTSET_B + QIF_BTIME_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_BTIME_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_ITIME) {
dm->dqb_itime = di->dqb_itime;
check_ilim = 1;
- __set_bit(DQ_LASTSET_B + QIF_ITIME_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_ITIME_B, &dquot->dq_flags);
}
if (check_blim) {
diff --git a/fs/udf/balloc.c b/fs/udf/balloc.c
index 19626e2..9a9378b 100644
--- a/fs/udf/balloc.c
+++ b/fs/udf/balloc.c
@@ -125,9 +125,8 @@
mutex_lock(&sbi->s_alloc_mutex);
partmap = &sbi->s_partmaps[bloc->partitionReferenceNum];
- if (bloc->logicalBlockNum < 0 ||
- (bloc->logicalBlockNum + count) >
- partmap->s_partition_len) {
+ if (bloc->logicalBlockNum + count < count ||
+ (bloc->logicalBlockNum + count) > partmap->s_partition_len) {
udf_debug("%d < %d || %d + %d > %d\n",
bloc->logicalBlockNum, 0, bloc->logicalBlockNum,
count, partmap->s_partition_len);
@@ -393,9 +392,8 @@
mutex_lock(&sbi->s_alloc_mutex);
partmap = &sbi->s_partmaps[bloc->partitionReferenceNum];
- if (bloc->logicalBlockNum < 0 ||
- (bloc->logicalBlockNum + count) >
- partmap->s_partition_len) {
+ if (bloc->logicalBlockNum + count < count ||
+ (bloc->logicalBlockNum + count) > partmap->s_partition_len) {
udf_debug("%d < %d || %d + %d > %d\n",
bloc->logicalBlockNum, 0, bloc->logicalBlockNum, count,
partmap->s_partition_len);
diff --git a/fs/udf/file.c b/fs/udf/file.c
index 1eb0677..4b6a46c 100644
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -218,7 +218,7 @@
.llseek = generic_file_llseek,
};
-static int udf_setattr(struct dentry *dentry, struct iattr *iattr)
+int udf_setattr(struct dentry *dentry, struct iattr *iattr)
{
struct inode *inode = dentry->d_inode;
int error;
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index bb863fe..8a3fbd1 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -1314,7 +1314,7 @@
break;
case ICBTAG_FILE_TYPE_SYMLINK:
inode->i_data.a_ops = &udf_symlink_aops;
- inode->i_op = &page_symlink_inode_operations;
+ inode->i_op = &udf_symlink_inode_operations;
inode->i_mode = S_IFLNK | S_IRWXUGO;
break;
case ICBTAG_FILE_TYPE_MAIN:
diff --git a/fs/udf/namei.c b/fs/udf/namei.c
index db423ab..7581602 100644
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -925,7 +925,7 @@
iinfo = UDF_I(inode);
inode->i_mode = S_IFLNK | S_IRWXUGO;
inode->i_data.a_ops = &udf_symlink_aops;
- inode->i_op = &page_symlink_inode_operations;
+ inode->i_op = &udf_symlink_inode_operations;
if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB) {
struct kernel_lb_addr eloc;
@@ -1393,6 +1393,7 @@
const struct inode_operations udf_dir_inode_operations = {
.lookup = udf_lookup,
.create = udf_create,
+ .setattr = udf_setattr,
.link = udf_link,
.unlink = udf_unlink,
.symlink = udf_symlink,
@@ -1401,3 +1402,9 @@
.mknod = udf_mknod,
.rename = udf_rename,
};
+const struct inode_operations udf_symlink_inode_operations = {
+ .readlink = generic_readlink,
+ .follow_link = page_follow_link_light,
+ .put_link = page_put_link,
+ .setattr = udf_setattr,
+};
diff --git a/fs/udf/udfdecl.h b/fs/udf/udfdecl.h
index 4223ac8..702a114 100644
--- a/fs/udf/udfdecl.h
+++ b/fs/udf/udfdecl.h
@@ -76,6 +76,7 @@
extern const struct file_operations udf_dir_operations;
extern const struct inode_operations udf_file_inode_operations;
extern const struct file_operations udf_file_operations;
+extern const struct inode_operations udf_symlink_inode_operations;
extern const struct address_space_operations udf_aops;
extern const struct address_space_operations udf_adinicb_aops;
extern const struct address_space_operations udf_symlink_aops;
@@ -131,7 +132,7 @@
/* file.c */
extern int udf_ioctl(struct inode *, struct file *, unsigned int,
unsigned long);
-
+extern int udf_setattr(struct dentry *dentry, struct iattr *iattr);
/* inode.c */
extern struct inode *udf_iget(struct super_block *, struct kernel_lb_addr *);
extern int udf_sync_inode(struct inode *);
diff --git a/mm/mmap.c b/mm/mmap.c
index 75557c6..f90ea92 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -507,11 +507,12 @@
struct address_space *mapping = NULL;
struct prio_tree_root *root = NULL;
struct file *file = vma->vm_file;
- struct anon_vma *anon_vma = NULL;
long adjust_next = 0;
int remove_next = 0;
if (next && !insert) {
+ struct vm_area_struct *exporter = NULL;
+
if (end >= next->vm_end) {
/*
* vma expands, overlapping all the next, and
@@ -519,7 +520,7 @@
*/
again: remove_next = 1 + (end > next->vm_end);
end = next->vm_end;
- anon_vma = next->anon_vma;
+ exporter = next;
importer = vma;
} else if (end > next->vm_start) {
/*
@@ -527,7 +528,7 @@
* mprotect case 5 shifting the boundary up.
*/
adjust_next = (end - next->vm_start) >> PAGE_SHIFT;
- anon_vma = next->anon_vma;
+ exporter = next;
importer = vma;
} else if (end < vma->vm_end) {
/*
@@ -536,28 +537,19 @@
* mprotect case 4 shifting the boundary down.
*/
adjust_next = - ((vma->vm_end - end) >> PAGE_SHIFT);
- anon_vma = next->anon_vma;
+ exporter = vma;
importer = next;
}
- }
- /*
- * When changing only vma->vm_end, we don't really need anon_vma lock.
- */
- if (vma->anon_vma && (insert || importer || start != vma->vm_start))
- anon_vma = vma->anon_vma;
- if (anon_vma) {
/*
* Easily overlooked: when mprotect shifts the boundary,
* make sure the expanding vma has anon_vma set if the
* shrinking vma had, to cover any anon pages imported.
*/
- if (importer && !importer->anon_vma) {
- /* Block reverse map lookups until things are set up. */
- if (anon_vma_clone(importer, vma)) {
+ if (exporter && exporter->anon_vma && !importer->anon_vma) {
+ if (anon_vma_clone(importer, exporter))
return -ENOMEM;
- }
- importer->anon_vma = anon_vma;
+ importer->anon_vma = exporter->anon_vma;
}
}
@@ -825,6 +817,61 @@
}
/*
+ * Rough compatbility check to quickly see if it's even worth looking
+ * at sharing an anon_vma.
+ *
+ * They need to have the same vm_file, and the flags can only differ
+ * in things that mprotect may change.
+ *
+ * NOTE! The fact that we share an anon_vma doesn't _have_ to mean that
+ * we can merge the two vma's. For example, we refuse to merge a vma if
+ * there is a vm_ops->close() function, because that indicates that the
+ * driver is doing some kind of reference counting. But that doesn't
+ * really matter for the anon_vma sharing case.
+ */
+static int anon_vma_compatible(struct vm_area_struct *a, struct vm_area_struct *b)
+{
+ return a->vm_end == b->vm_start &&
+ mpol_equal(vma_policy(a), vma_policy(b)) &&
+ a->vm_file == b->vm_file &&
+ !((a->vm_flags ^ b->vm_flags) & ~(VM_READ|VM_WRITE|VM_EXEC)) &&
+ b->vm_pgoff == a->vm_pgoff + ((b->vm_start - a->vm_start) >> PAGE_SHIFT);
+}
+
+/*
+ * Do some basic sanity checking to see if we can re-use the anon_vma
+ * from 'old'. The 'a'/'b' vma's are in VM order - one of them will be
+ * the same as 'old', the other will be the new one that is trying
+ * to share the anon_vma.
+ *
+ * NOTE! This runs with mm_sem held for reading, so it is possible that
+ * the anon_vma of 'old' is concurrently in the process of being set up
+ * by another page fault trying to merge _that_. But that's ok: if it
+ * is being set up, that automatically means that it will be a singleton
+ * acceptable for merging, so we can do all of this optimistically. But
+ * we do that ACCESS_ONCE() to make sure that we never re-load the pointer.
+ *
+ * IOW: that the "list_is_singular()" test on the anon_vma_chain only
+ * matters for the 'stable anon_vma' case (ie the thing we want to avoid
+ * is to return an anon_vma that is "complex" due to having gone through
+ * a fork).
+ *
+ * We also make sure that the two vma's are compatible (adjacent,
+ * and with the same memory policies). That's all stable, even with just
+ * a read lock on the mm_sem.
+ */
+static struct anon_vma *reusable_anon_vma(struct vm_area_struct *old, struct vm_area_struct *a, struct vm_area_struct *b)
+{
+ if (anon_vma_compatible(a, b)) {
+ struct anon_vma *anon_vma = ACCESS_ONCE(old->anon_vma);
+
+ if (anon_vma && list_is_singular(&old->anon_vma_chain))
+ return anon_vma;
+ }
+ return NULL;
+}
+
+/*
* find_mergeable_anon_vma is used by anon_vma_prepare, to check
* neighbouring vmas for a suitable anon_vma, before it goes off
* to allocate a new anon_vma. It checks because a repetitive
@@ -834,28 +881,16 @@
*/
struct anon_vma *find_mergeable_anon_vma(struct vm_area_struct *vma)
{
+ struct anon_vma *anon_vma;
struct vm_area_struct *near;
- unsigned long vm_flags;
near = vma->vm_next;
if (!near)
goto try_prev;
- /*
- * Since only mprotect tries to remerge vmas, match flags
- * which might be mprotected into each other later on.
- * Neither mlock nor madvise tries to remerge at present,
- * so leave their flags as obstructing a merge.
- */
- vm_flags = vma->vm_flags & ~(VM_READ|VM_WRITE|VM_EXEC);
- vm_flags |= near->vm_flags & (VM_READ|VM_WRITE|VM_EXEC);
-
- if (near->anon_vma && vma->vm_end == near->vm_start &&
- mpol_equal(vma_policy(vma), vma_policy(near)) &&
- can_vma_merge_before(near, vm_flags,
- NULL, vma->vm_file, vma->vm_pgoff +
- ((vma->vm_end - vma->vm_start) >> PAGE_SHIFT)))
- return near->anon_vma;
+ anon_vma = reusable_anon_vma(near, vma, near);
+ if (anon_vma)
+ return anon_vma;
try_prev:
/*
* It is potentially slow to have to call find_vma_prev here.
@@ -868,14 +903,9 @@
if (!near)
goto none;
- vm_flags = vma->vm_flags & ~(VM_READ|VM_WRITE|VM_EXEC);
- vm_flags |= near->vm_flags & (VM_READ|VM_WRITE|VM_EXEC);
-
- if (near->anon_vma && near->vm_end == vma->vm_start &&
- mpol_equal(vma_policy(near), vma_policy(vma)) &&
- can_vma_merge_after(near, vm_flags,
- NULL, vma->vm_file, vma->vm_pgoff))
- return near->anon_vma;
+ anon_vma = reusable_anon_vma(near, near, vma);
+ if (anon_vma)
+ return anon_vma;
none:
/*
* There's no absolute need to look only at touching neighbours:
diff --git a/mm/rmap.c b/mm/rmap.c
index eaa7a09..4bad326 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -182,7 +182,7 @@
{
struct anon_vma_chain *avc, *pavc;
- list_for_each_entry(pavc, &src->anon_vma_chain, same_vma) {
+ list_for_each_entry_reverse(pavc, &src->anon_vma_chain, same_vma) {
avc = anon_vma_chain_alloc();
if (!avc)
goto enomem_failure;
@@ -734,9 +734,20 @@
static void __page_set_anon_rmap(struct page *page,
struct vm_area_struct *vma, unsigned long address)
{
- struct anon_vma *anon_vma = vma->anon_vma;
+ struct anon_vma_chain *avc;
+ struct anon_vma *anon_vma;
- BUG_ON(!anon_vma);
+ BUG_ON(!vma->anon_vma);
+
+ /*
+ * We must use the _oldest_ possible anon_vma for the page mapping!
+ *
+ * So take the last AVC chain entry in the vma, which is the deepest
+ * ancestor, and use the anon_vma from that.
+ */
+ avc = list_entry(vma->anon_vma_chain.prev, struct anon_vma_chain, same_vma);
+ anon_vma = avc->anon_vma;
+
anon_vma = (void *) anon_vma + PAGE_MAPPING_ANON;
page->mapping = (struct address_space *) anon_vma;
page->index = linear_page_index(vma, address);
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index fd90eb8..edea15a 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -679,7 +679,10 @@
int ret;
dprintk("svcrdma: Creating RDMA socket\n");
-
+ if (sa->sa_family != AF_INET) {
+ dprintk("svcrdma: Address family %d is not supported.\n", sa->sa_family);
+ return ERR_PTR(-EAFNOSUPPORT);
+ }
cma_xprt = rdma_create_xprt(serv, 1);
if (!cma_xprt)
return ERR_PTR(-ENOMEM);