k8temp: Documentation update
Update the documentation for the k8temp driver.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/Documentation/hwmon/k8temp b/Documentation/hwmon/k8temp
index bab445a..30d123b 100644
--- a/Documentation/hwmon/k8temp
+++ b/Documentation/hwmon/k8temp
@@ -2,7 +2,7 @@
====================
Supported chips:
- * AMD K8 CPU
+ * AMD Athlon64/FX or Opteron CPUs
Prefix: 'k8temp'
Addresses scanned: PCI space
Datasheet: http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
@@ -13,10 +13,13 @@
Description
-----------
-This driver permits reading temperature sensor(s) embedded inside AMD K8 CPUs.
-Official documentation says that it works from revision F of K8 core, but
-in fact it seems to be implemented for all revisions of K8 except the first
-two revisions (SH-B0 and SH-B3).
+This driver permits reading temperature sensor(s) embedded inside AMD K8
+family CPUs (Athlon64/FX, Opteron). Official documentation says that it works
+from revision F of K8 core, but in fact it seems to be implemented for all
+revisions of K8 except the first two revisions (SH-B0 and SH-B3).
+
+Please note that you will need at least lm-sensors 2.10.1 for proper userspace
+support.
There can be up to four temperature sensors inside single CPU. The driver
will auto-detect the sensors and will display only temperatures from
diff --git a/MAINTAINERS b/MAINTAINERS
index 5305dd6..595b34c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1668,6 +1668,12 @@
L: ext2-devel@lists.sourceforge.net
S: Maintained
+K8TEMP HARDWARE MONITORING DRIVER
+P: Rudolf Marek
+M: r.marek@assembler.cz
+L: lm-sensors@lm-sensors.org
+S: Maintained
+
KCONFIG
P: Roman Zippel
M: zippel@linux-m68k.org
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e0dede7..e76d919 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -95,11 +95,13 @@
will be called adm9240.
config SENSORS_K8TEMP
- tristate "AMD K8 processor sensor"
+ tristate "AMD Athlon64/FX or Opteron temperature sensor"
depends on HWMON && X86 && PCI && EXPERIMENTAL
help
If you say yes here you get support for the temperature
- sensor(s) inside your AMD K8 CPU.
+ sensor(s) inside your CPU. Supported is whole AMD K8
+ microarchitecture. Please note that you will need at least
+ lm-sensors 2.10.1 for proper userspace support.
This driver can also be built as a module. If so, the module
will be called k8temp.