Input: migor-ts - convert to a threaded IRQ
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
diff --git a/drivers/input/touchscreen/migor_ts.c b/drivers/input/touchscreen/migor_ts.c
index 5803bd0..af746b7 100644
--- a/drivers/input/touchscreen/migor_ts.c
+++ b/drivers/input/touchscreen/migor_ts.c
@@ -36,7 +36,6 @@
struct migor_ts_priv {
struct i2c_client *client;
struct input_dev *input;
- struct delayed_work work;
int irq;
};
@@ -44,15 +43,24 @@
0x01, 0x06, 0x07, };
static const u_int8_t migor_ts_dis_seq[17] = { };
-static void migor_ts_poscheck(struct work_struct *work)
+static irqreturn_t migor_ts_isr(int irq, void *dev_id)
{
- struct migor_ts_priv *priv = container_of(work,
- struct migor_ts_priv,
- work.work);
+ struct migor_ts_priv *priv = dev_id;
unsigned short xpos, ypos;
unsigned char event;
u_int8_t buf[16];
+ /*
+ * The touch screen controller chip is hooked up to the CPU
+ * using I2C and a single interrupt line. The interrupt line
+ * is pulled low whenever someone taps the screen. To deassert
+ * the interrupt line we need to acknowledge the interrupt by
+ * communicating with the controller over the slow i2c bus.
+ *
+ * Since I2C bus controller may sleep we are using threaded
+ * IRQ here.
+ */
+
memset(buf, 0, sizeof(buf));
/* Set Index 0 */
@@ -72,41 +80,25 @@
xpos = ((buf[11] & 0x03) << 8 | buf[10]);
event = buf[12];
- if (event == EVENT_PENDOWN || event == EVENT_REPEAT) {
+ switch (event) {
+ case EVENT_PENDOWN:
+ case EVENT_REPEAT:
input_report_key(priv->input, BTN_TOUCH, 1);
input_report_abs(priv->input, ABS_X, ypos); /*X-Y swap*/
input_report_abs(priv->input, ABS_Y, xpos);
input_sync(priv->input);
- } else if (event == EVENT_PENUP) {
+ break;
+
+ case EVENT_PENUP:
input_report_key(priv->input, BTN_TOUCH, 0);
input_sync(priv->input);
+ break;
}
+
out:
- enable_irq(priv->irq);
-}
-
-static irqreturn_t migor_ts_isr(int irq, void *dev_id)
-{
- struct migor_ts_priv *priv = dev_id;
-
- /* the touch screen controller chip is hooked up to the cpu
- * using i2c and a single interrupt line. the interrupt line
- * is pulled low whenever someone taps the screen. to deassert
- * the interrupt line we need to acknowledge the interrupt by
- * communicating with the controller over the slow i2c bus.
- *
- * we can't acknowledge from interrupt context since the i2c
- * bus controller may sleep, so we just disable the interrupt
- * here and handle the acknowledge using delayed work.
- */
-
- disable_irq_nosync(irq);
- schedule_delayed_work(&priv->work, HZ / 20);
-
return IRQ_HANDLED;
}
-
static int migor_ts_open(struct input_dev *dev)
{
struct migor_ts_priv *priv = input_get_drvdata(dev);
@@ -131,15 +123,6 @@
disable_irq(priv->irq);
- /* cancel pending work and wait for migor_ts_poscheck() to finish */
- if (cancel_delayed_work_sync(&priv->work)) {
- /*
- * if migor_ts_poscheck was canceled we need to enable IRQ
- * here to balance disable done in migor_ts_isr.
- */
- enable_irq(priv->irq);
- }
-
/* disable controller */
i2c_master_send(client, migor_ts_dis_seq, sizeof(migor_ts_dis_seq));
@@ -186,15 +169,15 @@
priv->client = client;
priv->input = input;
- INIT_DELAYED_WORK(&priv->work, migor_ts_poscheck);
priv->irq = client->irq;
error = input_register_device(input);
if (error)
goto err1;
- error = request_irq(priv->irq, migor_ts_isr, IRQF_TRIGGER_LOW,
- client->name, priv);
+ error = request_threaded_irq(priv->irq, NULL, migor_ts_isr,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ client->name, priv);
if (error) {
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
goto err2;