libata-acpi: clean up ata_acpi_exec_tfs()
This patch cleans up ata_acpi_exec_tfs() and its friends.
* Rename taskfile_array to ata_acpi_gtf and make it __packed as it's
used as argument to ACPI method, and use pointer to ata_acpi_gtf and
number of taskfiles to represent _GTF taskfiles instead of a pointer
casted into unsigned long and byte count. This makes argument
re-checking in do_drive_set_taskfiles() unnecessary.
* Pointer in void * not in unsigned long.
* Clean up do_drive_get_GTF() error handling and make
do_drive_get_GTF() return number of taskfiles on success, 0 if _GTF
doesn't exist or doesn't contain valid ata. -errno on other errors.
* Remove superflous check for acpi->buffer.pointer.
* Update taskfile_load_raw() such that printed messages look similar
to the messages printed by ata_eh_report().
* s/do_drive_get_GTF/ata_dev_get_GTF/
s/do_drive_set_taskfiles/ata_dev_set_taskfiles/
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index eda4263..4d36d25 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -28,9 +28,9 @@
#define SATA_ADR(root,pmp) (((root) << 16) | (pmp))
#define REGS_PER_GTF 7
-struct taskfile_array {
- u8 tfa[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */
-};
+struct ata_acpi_gtf {
+ u8 tf[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */
+} __packed;
/*
* Helper - belongs in the PCI layer somewhere eventually
@@ -101,10 +101,10 @@
}
/**
- * do_drive_get_GTF - get the drive bootup default taskfile settings
+ * ata_dev_get_GTF - get the drive bootup default taskfile settings
* @dev: target ATA device
- * @gtf_length: number of bytes of _GTF data returned at @gtf_address
- * @gtf_address: buffer containing _GTF taskfile arrays
+ * @gtf: output parameter for buffer containing _GTF taskfile arrays
+ * @ptr_to_free: pointer which should be freed
*
* This applies to both PATA and SATA drives.
*
@@ -114,24 +114,28 @@
* The <variable number> is not known in advance, so have ACPI-CA
* allocate the buffer as needed and return it, then free it later.
*
- * The returned @gtf_length and @gtf_address are only valid if the
- * function return value is 0.
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * Number of taskfiles on success, 0 if _GTF doesn't exist or doesn't
+ * contain valid data. -errno on other errors.
*/
-static int do_drive_get_GTF(struct ata_device *dev, unsigned int *gtf_length,
- unsigned long *gtf_address, unsigned long *obj_loc)
+static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf,
+ void **ptr_to_free)
{
struct ata_port *ap = dev->ap;
acpi_status status;
struct acpi_buffer output;
union acpi_object *out_obj;
- int err = -ENODEV;
+ int rc = 0;
- *gtf_length = 0;
- *gtf_address = 0UL;
- *obj_loc = 0UL;
+ /* set up output buffer */
+ output.length = ACPI_ALLOCATE_BUFFER;
+ output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
if (!dev->acpi_handle)
- return 0;
+ goto out_free;
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
@@ -143,23 +147,20 @@
"ata_dev_present: %d, PORT_DISABLED: %lu\n",
__FUNCTION__, ata_dev_enabled(dev),
ap->flags & ATA_FLAG_DISABLED);
- goto out;
+ goto out_free;
}
- /* Setting up output buffer */
- output.length = ACPI_ALLOCATE_BUFFER;
- output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
-
/* _GTF has no input parameters */
- err = -EIO;
- status = acpi_evaluate_object(dev->acpi_handle, "_GTF",
- NULL, &output);
+ status = acpi_evaluate_object(dev->acpi_handle, "_GTF", NULL, &output);
+
if (ACPI_FAILURE(status)) {
- if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG,
- "%s: Run _GTF error: status = 0x%x\n",
- __FUNCTION__, status);
- goto out;
+ if (status != AE_NOT_FOUND) {
+ ata_dev_printk(dev, KERN_WARNING,
+ "_GTF evaluation failed (AE 0x%x)\n",
+ status);
+ rc = -EIO;
+ }
+ goto out_free;
}
if (!output.length || !output.pointer) {
@@ -169,43 +170,43 @@
__FUNCTION__,
(unsigned long long)output.length,
output.pointer);
- kfree(output.pointer);
- goto out;
+ goto out_free;
}
out_obj = output.pointer;
if (out_obj->type != ACPI_TYPE_BUFFER) {
- kfree(output.pointer);
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: Run _GTF: "
"error: expected object type of "
" ACPI_TYPE_BUFFER, got 0x%x\n",
__FUNCTION__, out_obj->type);
- err = -ENOENT;
- goto out;
+ rc = -EINVAL;
+ goto out_free;
}
- if (!out_obj->buffer.length || !out_obj->buffer.pointer ||
- out_obj->buffer.length % REGS_PER_GTF) {
+ if (out_obj->buffer.length % REGS_PER_GTF) {
if (ata_msg_drv(ap))
ata_dev_printk(dev, KERN_ERR,
"%s: unexpected GTF length (%d) or addr (0x%p)\n",
__FUNCTION__, out_obj->buffer.length,
out_obj->buffer.pointer);
- err = -ENOENT;
- goto out;
+ rc = -EINVAL;
+ goto out_free;
}
- *gtf_length = out_obj->buffer.length;
- *gtf_address = (unsigned long)out_obj->buffer.pointer;
- *obj_loc = (unsigned long)out_obj;
+ *ptr_to_free = out_obj;
+ *gtf = (void *)out_obj->buffer.pointer;
+ rc = out_obj->buffer.length / REGS_PER_GTF;
+
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: returning "
- "gtf_length=%d, gtf_address=0x%lx, obj_loc=0x%lx\n",
- __FUNCTION__, *gtf_length, *gtf_address, *obj_loc);
- err = 0;
-out:
- return err;
+ "gtf=%p, gtf_count=%d, ptr_to_free=%p\n",
+ __FUNCTION__, *gtf, rc, *ptr_to_free);
+ return rc;
+
+ out_free:
+ kfree(output.pointer);
+ return rc;
}
/**
@@ -224,68 +225,78 @@
* function also waits for idle after writing control and before
* writing the remaining registers.
*
- * LOCKING: TBD:
- * Inherited from caller.
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
*/
-static void taskfile_load_raw(struct ata_device *dev,
- const struct taskfile_array *gtf)
+static int taskfile_load_raw(struct ata_device *dev,
+ const struct ata_acpi_gtf *gtf)
{
struct ata_port *ap = dev->ap;
- struct ata_taskfile tf;
- unsigned int err;
+ struct ata_taskfile tf, rtf;
+ unsigned int err_mask;
- if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: (0x1f1-1f7): hex: "
- "%02x %02x %02x %02x %02x %02x %02x\n",
- __FUNCTION__,
- gtf->tfa[0], gtf->tfa[1], gtf->tfa[2],
- gtf->tfa[3], gtf->tfa[4], gtf->tfa[5], gtf->tfa[6]);
-
- if ((gtf->tfa[0] == 0) && (gtf->tfa[1] == 0) && (gtf->tfa[2] == 0)
- && (gtf->tfa[3] == 0) && (gtf->tfa[4] == 0) && (gtf->tfa[5] == 0)
- && (gtf->tfa[6] == 0))
- return;
+ if ((gtf->tf[0] == 0) && (gtf->tf[1] == 0) && (gtf->tf[2] == 0)
+ && (gtf->tf[3] == 0) && (gtf->tf[4] == 0) && (gtf->tf[5] == 0)
+ && (gtf->tf[6] == 0))
+ return 0;
ata_tf_init(dev, &tf);
/* convert gtf to tf */
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */
tf.protocol = ATA_PROT_NODATA;
- tf.feature = gtf->tfa[0]; /* 0x1f1 */
- tf.nsect = gtf->tfa[1]; /* 0x1f2 */
- tf.lbal = gtf->tfa[2]; /* 0x1f3 */
- tf.lbam = gtf->tfa[3]; /* 0x1f4 */
- tf.lbah = gtf->tfa[4]; /* 0x1f5 */
- tf.device = gtf->tfa[5]; /* 0x1f6 */
- tf.command = gtf->tfa[6]; /* 0x1f7 */
+ tf.feature = gtf->tf[0]; /* 0x1f1 */
+ tf.nsect = gtf->tf[1]; /* 0x1f2 */
+ tf.lbal = gtf->tf[2]; /* 0x1f3 */
+ tf.lbam = gtf->tf[3]; /* 0x1f4 */
+ tf.lbah = gtf->tf[4]; /* 0x1f5 */
+ tf.device = gtf->tf[5]; /* 0x1f6 */
+ tf.command = gtf->tf[6]; /* 0x1f7 */
- err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
- if (err && ata_msg_probe(ap))
+ if (ata_msg_probe(ap))
+ ata_dev_printk(dev, KERN_DEBUG, "executing ACPI cmd "
+ "%02x/%02x:%02x:%02x:%02x:%02x:%02x\n",
+ tf.command, tf.feature, tf.nsect,
+ tf.lbal, tf.lbam, tf.lbah, tf.device);
+
+ rtf = tf;
+ err_mask = ata_exec_internal(dev, &rtf, NULL, DMA_NONE, NULL, 0);
+ if (err_mask) {
ata_dev_printk(dev, KERN_ERR,
- "%s: ata_exec_internal failed: %u\n",
- __FUNCTION__, err);
+ "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x failed "
+ "(Emask=0x%x Stat=0x%02x Err=0x%02x)\n",
+ tf.command, tf.feature, tf.nsect, tf.lbal, tf.lbam,
+ tf.lbah, tf.device, err_mask, rtf.command, rtf.feature);
+ return -EIO;
+ }
+
+ return 0;
}
/**
- * do_drive_set_taskfiles - write the drive taskfile settings from _GTF
+ * ata_dev_set_taskfiles - write the drive taskfile settings from _GTF
* @dev: target ATA device
- * @gtf_length: total number of bytes of _GTF taskfiles
- * @gtf_address: location of _GTF taskfile arrays
+ * @gtf: pointer to array of _GTF taskfiles to execute
+ * @gtf_count: number of taskfiles
*
* This applies to both PATA and SATA drives.
*
- * Write {gtf_address, length gtf_length} in groups of
- * REGS_PER_GTF bytes.
+ * Execute taskfiles in @gtf.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
*/
-static int do_drive_set_taskfiles(struct ata_device *dev,
- unsigned int gtf_length,
- unsigned long gtf_address)
+static int ata_dev_set_taskfiles(struct ata_device *dev,
+ struct ata_acpi_gtf *gtf, int gtf_count)
{
struct ata_port *ap = dev->ap;
- int err = -ENODEV;
- int gtf_count = gtf_length / REGS_PER_GTF;
int ix;
- struct taskfile_array *gtf;
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
@@ -295,29 +306,13 @@
return 0;
if (!ata_dev_enabled(dev) || (ap->flags & ATA_FLAG_DISABLED))
- goto out;
- if (!gtf_count) /* shouldn't be here */
- goto out;
+ return -ENODEV;
- if (gtf_length % REGS_PER_GTF) {
- if (ata_msg_drv(ap))
- ata_dev_printk(dev, KERN_ERR,
- "%s: unexpected GTF length (%d)\n",
- __FUNCTION__, gtf_length);
- goto out;
- }
+ /* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */
+ for (ix = 0; ix < gtf_count; ix++)
+ taskfile_load_raw(dev, gtf++);
- for (ix = 0; ix < gtf_count; ix++) {
- gtf = (struct taskfile_array *)
- (gtf_address + ix * REGS_PER_GTF);
-
- /* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */
- taskfile_load_raw(dev, gtf);
- }
-
- err = 0;
-out:
- return err;
+ return 0;
}
/**
@@ -328,11 +323,7 @@
*/
int ata_acpi_exec_tfs(struct ata_port *ap)
{
- int ix;
- int ret = 0;
- unsigned int gtf_length;
- unsigned long gtf_address;
- unsigned long obj_loc;
+ int ix, ret = 0;
/*
* TBD - implement PATA support. For now,
@@ -344,12 +335,16 @@
for (ix = 0; ix < ATA_MAX_DEVICES; ix++) {
struct ata_device *dev = &ap->device[ix];
+ struct ata_acpi_gtf *gtf = NULL;
+ int gtf_count;
+ void *ptr_to_free = NULL;
if (!ata_dev_enabled(dev))
continue;
- ret = do_drive_get_GTF(dev, >f_length, >f_address,
- &obj_loc);
+ ret = ata_dev_get_GTF(dev, >f, &ptr_to_free);
+ if (ret == 0)
+ continue;
if (ret < 0) {
if (ata_msg_probe(ap))
ata_port_printk(ap, KERN_DEBUG,
@@ -357,9 +352,10 @@
__FUNCTION__, ret);
break;
}
+ gtf_count = ret;
- ret = do_drive_set_taskfiles(dev, gtf_length, gtf_address);
- kfree((void *)obj_loc);
+ ret = ata_dev_set_taskfiles(dev, gtf, gtf_count);
+ kfree(ptr_to_free);
if (ret < 0) {
if (ata_msg_probe(ap))
ata_port_printk(ap, KERN_DEBUG,