| /* |
| * azt3328.c - driver for Aztech AZF3328 based soundcards (e.g. PCI168). |
| * Copyright (C) 2002, 2005 by Andreas Mohr <andi AT lisas.de> |
| * |
| * Framework borrowed from Bart Hartgers's als4000.c. |
| * Driver developed on PCI168 AP(W) version (PCI rev. 10, subsystem ID 1801), |
| * found in a Fujitsu-Siemens PC ("Cordant", aluminum case). |
| * Other versions are: |
| * PCI168 A(W), sub ID 1800 |
| * PCI168 A/AP, sub ID 8000 |
| * Please give me feedback in case you try my driver with one of these!! |
| * |
| * GPL LICENSE |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * NOTES |
| * Since Aztech does not provide any chipset documentation, |
| * even on repeated request to various addresses, |
| * and the answer that was finally given was negative |
| * (and I was stupid enough to manage to get hold of a PCI168 soundcard |
| * in the first place >:-P}), |
| * I was forced to base this driver on reverse engineering |
| * (3 weeks' worth of evenings filled with driver work). |
| * (and no, I did NOT go the easy way: to pick up a SB PCI128 for 9 Euros) |
| * |
| * The AZF3328 chip (note: AZF3328, *not* AZT3328, that's just the driver name |
| * for compatibility reasons) has the following features: |
| * |
| * - builtin AC97 conformant codec (SNR over 80dB) |
| * Note that "conformant" != "compliant"!! this chip's mixer register layout |
| * *differs* from the standard AC97 layout: |
| * they chose to not implement the headphone register (which is not a |
| * problem since it's merely optional), yet when doing this, they committed |
| * the grave sin of letting other registers follow immediately instead of |
| * keeping a headphone dummy register, thereby shifting the mixer register |
| * addresses illegally. So far unfortunately it looks like the very flexible |
| * ALSA AC97 support is still not enough to easily compensate for such a |
| * grave layout violation despite all tweaks and quirks mechanisms it offers. |
| * - builtin genuine OPL3 |
| * - full duplex 16bit playback/record at independent sampling rate |
| * - MPU401 (+ legacy address support) FIXME: how to enable legacy addr?? |
| * - game port (legacy address support) |
| * - built-in General DirectX timer having a 20 bits counter |
| * with 1us resolution (see below!) |
| * - I2S serial port for external DAC |
| * - supports 33MHz PCI spec 2.1, PCI power management 1.0, compliant with ACPI |
| * - supports hardware volume control |
| * - single chip low cost solution (128 pin QFP) |
| * - supports programmable Sub-vendor and Sub-system ID |
| * required for Microsoft's logo compliance (FIXME: where?) |
| * - PCI168 AP(W) card: power amplifier with 4 Watts/channel at 4 Ohms |
| * |
| * Note that this driver now is actually *better* than the Windows driver, |
| * since it additionally supports the card's 1MHz DirectX timer - just try |
| * the following snd-seq module parameters etc.: |
| * - options snd-seq seq_default_timer_class=2 seq_default_timer_sclass=0 |
| * seq_default_timer_card=0 seq_client_load=1 seq_default_timer_device=0 |
| * seq_default_timer_subdevice=0 seq_default_timer_resolution=1000000 |
| * - "timidity -iAv -B2,8 -Os -EFreverb=0" |
| * - "pmidi -p 128:0 jazz.mid" |
| * |
| * Certain PCI versions of this card are susceptible to DMA traffic underruns |
| * in some systems (resulting in sound crackling/clicking/popping), |
| * probably because they don't have a DMA FIFO buffer or so. |
| * Overview (PCI ID/PCI subID/PCI rev.): |
| * - no DMA crackling on SiS735: 0x50DC/0x1801/16 |
| * - unknown performance: 0x50DC/0x1801/10 |
| * (well, it's not bad on an Athlon 1800 with now very optimized IRQ handler) |
| * |
| * Crackling happens with VIA chipsets or, in my case, an SiS735, which is |
| * supposed to be very fast and supposed to get rid of crackling much |
| * better than a VIA, yet ironically I still get crackling, like many other |
| * people with the same chipset. |
| * Possible remedies: |
| * - plug card into a different PCI slot, preferrably one that isn't shared |
| * too much (this helps a lot, but not completely!) |
| * - get rid of PCI VGA card, use AGP instead |
| * - upgrade or downgrade BIOS |
| * - fiddle with PCI latency settings (setpci -v -s BUSID latency_timer=XX) |
| * Not too helpful. |
| * - Disable ACPI/power management/"Auto Detect RAM/PCI Clk" in BIOS |
| * |
| * BUGS |
| * - full-duplex might *still* be problematic, not fully tested recently |
| * |
| * TODO |
| * - test MPU401 MIDI playback etc. |
| * - add some power micro-management (disable various units of the card |
| * as long as they're unused). However this requires I/O ports which I |
| * haven't figured out yet and which thus might not even exist... |
| * The standard suspend/resume functionality could probably make use of |
| * some improvement, too... |
| * - figure out what all unknown port bits are responsible for |
| * - figure out some cleverly evil scheme to possibly make ALSA AC97 code |
| * fully accept our quite incompatible ""AC97"" mixer and thus save some |
| * code (but I'm not too optimistic that doing this is possible at all) |
| */ |
| |
| #include <sound/driver.h> |
| #include <asm/io.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/gameport.h> |
| #include <linux/moduleparam.h> |
| #include <linux/dma-mapping.h> |
| #include <sound/core.h> |
| #include <sound/control.h> |
| #include <sound/pcm.h> |
| #include <sound/rawmidi.h> |
| #include <sound/mpu401.h> |
| #include <sound/opl3.h> |
| #include <sound/initval.h> |
| #include "azt3328.h" |
| |
| MODULE_AUTHOR("Andreas Mohr <andi AT lisas.de>"); |
| MODULE_DESCRIPTION("Aztech AZF3328 (PCI168)"); |
| MODULE_LICENSE("GPL"); |
| MODULE_SUPPORTED_DEVICE("{{Aztech,AZF3328}}"); |
| |
| #if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE)) |
| #define SUPPORT_JOYSTICK 1 |
| #endif |
| |
| #define DEBUG_MISC 0 |
| #define DEBUG_CALLS 0 |
| #define DEBUG_MIXER 0 |
| #define DEBUG_PLAY_REC 0 |
| #define DEBUG_IO 0 |
| #define DEBUG_TIMER 0 |
| #define MIXER_TESTING 0 |
| |
| #if DEBUG_MISC |
| #define snd_azf3328_dbgmisc(format, args...) printk(KERN_ERR format, ##args) |
| #else |
| #define snd_azf3328_dbgmisc(format, args...) |
| #endif |
| |
| #if DEBUG_CALLS |
| #define snd_azf3328_dbgcalls(format, args...) printk(format, ##args) |
| #define snd_azf3328_dbgcallenter() printk(KERN_ERR "--> %s\n", __FUNCTION__) |
| #define snd_azf3328_dbgcallleave() printk(KERN_ERR "<-- %s\n", __FUNCTION__) |
| #else |
| #define snd_azf3328_dbgcalls(format, args...) |
| #define snd_azf3328_dbgcallenter() |
| #define snd_azf3328_dbgcallleave() |
| #endif |
| |
| #if DEBUG_MIXER |
| #define snd_azf3328_dbgmixer(format, args...) printk(format, ##args) |
| #else |
| #define snd_azf3328_dbgmixer(format, args...) |
| #endif |
| |
| #if DEBUG_PLAY_REC |
| #define snd_azf3328_dbgplay(format, args...) printk(KERN_ERR format, ##args) |
| #else |
| #define snd_azf3328_dbgplay(format, args...) |
| #endif |
| |
| #if DEBUG_MISC |
| #define snd_azf3328_dbgtimer(format, args...) printk(KERN_ERR format, ##args) |
| #else |
| #define snd_azf3328_dbgtimer(format, args...) |
| #endif |
| |
| static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ |
| module_param_array(index, int, NULL, 0444); |
| MODULE_PARM_DESC(index, "Index value for AZF3328 soundcard."); |
| |
| static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ |
| module_param_array(id, charp, NULL, 0444); |
| MODULE_PARM_DESC(id, "ID string for AZF3328 soundcard."); |
| |
| static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */ |
| module_param_array(enable, bool, NULL, 0444); |
| MODULE_PARM_DESC(enable, "Enable AZF3328 soundcard."); |
| |
| #ifdef SUPPORT_JOYSTICK |
| static int joystick[SNDRV_CARDS]; |
| module_param_array(joystick, bool, NULL, 0444); |
| MODULE_PARM_DESC(joystick, "Enable joystick for AZF3328 soundcard."); |
| #endif |
| |
| static int seqtimer_scaling = 128; |
| module_param(seqtimer_scaling, int, 0444); |
| MODULE_PARM_DESC(seqtimer_scaling, "Set 1024000Hz sequencer timer scale factor (lockup danger!). Default 128."); |
| |
| struct snd_azf3328 { |
| /* often-used fields towards beginning, then grouped */ |
| unsigned long codec_port; |
| unsigned long io2_port; |
| unsigned long mpu_port; |
| unsigned long synth_port; |
| unsigned long mixer_port; |
| |
| spinlock_t reg_lock; |
| |
| struct snd_timer *timer; |
| |
| struct snd_pcm *pcm; |
| struct snd_pcm_substream *playback_substream; |
| struct snd_pcm_substream *capture_substream; |
| unsigned int is_playing; |
| unsigned int is_recording; |
| |
| struct snd_card *card; |
| struct snd_rawmidi *rmidi; |
| |
| #ifdef SUPPORT_JOYSTICK |
| struct gameport *gameport; |
| #endif |
| |
| struct pci_dev *pci; |
| int irq; |
| |
| #ifdef CONFIG_PM |
| /* register value containers for power management |
| * Note: not always full I/O range preserved (just like Win driver!) */ |
| u16 saved_regs_codec [AZF_IO_SIZE_CODEC_PM / 2]; |
| u16 saved_regs_io2 [AZF_IO_SIZE_IO2_PM / 2]; |
| u16 saved_regs_mpu [AZF_IO_SIZE_MPU_PM / 2]; |
| u16 saved_regs_synth[AZF_IO_SIZE_SYNTH_PM / 2]; |
| u16 saved_regs_mixer[AZF_IO_SIZE_MIXER_PM / 2]; |
| #endif |
| }; |
| |
| static const struct pci_device_id snd_azf3328_ids[] __devinitdata = { |
| { 0x122D, 0x50DC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* PCI168/3328 */ |
| { 0x122D, 0x80DA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* 3328 */ |
| { 0, } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, snd_azf3328_ids); |
| |
| static inline void |
| snd_azf3328_codec_outb(const struct snd_azf3328 *chip, int reg, u8 value) |
| { |
| outb(value, chip->codec_port + reg); |
| } |
| |
| static inline u8 |
| snd_azf3328_codec_inb(const struct snd_azf3328 *chip, int reg) |
| { |
| return inb(chip->codec_port + reg); |
| } |
| |
| static inline void |
| snd_azf3328_codec_outw(const struct snd_azf3328 *chip, int reg, u16 value) |
| { |
| outw(value, chip->codec_port + reg); |
| } |
| |
| static inline u16 |
| snd_azf3328_codec_inw(const struct snd_azf3328 *chip, int reg) |
| { |
| return inw(chip->codec_port + reg); |
| } |
| |
| static inline void |
| snd_azf3328_codec_outl(const struct snd_azf3328 *chip, int reg, u32 value) |
| { |
| outl(value, chip->codec_port + reg); |
| } |
| |
| static inline void |
| snd_azf3328_io2_outb(const struct snd_azf3328 *chip, int reg, u8 value) |
| { |
| outb(value, chip->io2_port + reg); |
| } |
| |
| static inline u8 |
| snd_azf3328_io2_inb(const struct snd_azf3328 *chip, int reg) |
| { |
| return inb(chip->io2_port + reg); |
| } |
| |
| static inline void |
| snd_azf3328_mixer_outw(const struct snd_azf3328 *chip, int reg, u16 value) |
| { |
| outw(value, chip->mixer_port + reg); |
| } |
| |
| static inline u16 |
| snd_azf3328_mixer_inw(const struct snd_azf3328 *chip, int reg) |
| { |
| return inw(chip->mixer_port + reg); |
| } |
| |
| static void |
| snd_azf3328_mixer_set_mute(const struct snd_azf3328 *chip, int reg, int do_mute) |
| { |
| unsigned long portbase = chip->mixer_port + reg + 1; |
| unsigned char oldval; |
| |
| /* the mute bit is on the *second* (i.e. right) register of a |
| * left/right channel setting */ |
| oldval = inb(portbase); |
| if (do_mute) |
| oldval |= 0x80; |
| else |
| oldval &= ~0x80; |
| outb(oldval, portbase); |
| } |
| |
| static void |
| snd_azf3328_mixer_write_volume_gradually(const struct snd_azf3328 *chip, int reg, unsigned char dst_vol_left, unsigned char dst_vol_right, int chan_sel, int delay) |
| { |
| unsigned long portbase = chip->mixer_port + reg; |
| unsigned char curr_vol_left = 0, curr_vol_right = 0; |
| int left_done = 0, right_done = 0; |
| |
| snd_azf3328_dbgcallenter(); |
| if (chan_sel & SET_CHAN_LEFT) |
| curr_vol_left = inb(portbase + 1); |
| else |
| left_done = 1; |
| if (chan_sel & SET_CHAN_RIGHT) |
| curr_vol_right = inb(portbase + 0); |
| else |
| right_done = 1; |
| |
| /* take care of muting flag (0x80) contained in left channel */ |
| if (curr_vol_left & 0x80) |
| dst_vol_left |= 0x80; |
| else |
| dst_vol_left &= ~0x80; |
| |
| do { |
| if (!left_done) { |
| if (curr_vol_left > dst_vol_left) |
| curr_vol_left--; |
| else |
| if (curr_vol_left < dst_vol_left) |
| curr_vol_left++; |
| else |
| left_done = 1; |
| outb(curr_vol_left, portbase + 1); |
| } |
| if (!right_done) { |
| if (curr_vol_right > dst_vol_right) |
| curr_vol_right--; |
| else |
| if (curr_vol_right < dst_vol_right) |
| curr_vol_right++; |
| else |
| right_done = 1; |
| /* during volume change, the right channel is crackling |
| * somewhat more than the left channel, unfortunately. |
| * This seems to be a hardware issue. */ |
| outb(curr_vol_right, portbase + 0); |
| } |
| if (delay) |
| mdelay(delay); |
| } while ((!left_done) || (!right_done)); |
| snd_azf3328_dbgcallleave(); |
| } |
| |
| /* |
| * general mixer element |
| */ |
| struct azf3328_mixer_reg { |
| unsigned int reg; |
| unsigned int lchan_shift, rchan_shift; |
| unsigned int mask; |
| unsigned int invert: 1; |
| unsigned int stereo: 1; |
| unsigned int enum_c: 4; |
| }; |
| |
| #define COMPOSE_MIXER_REG(reg,lchan_shift,rchan_shift,mask,invert,stereo,enum_c) \ |
| ((reg) | (lchan_shift << 8) | (rchan_shift << 12) | \ |
| (mask << 16) | \ |
| (invert << 24) | \ |
| (stereo << 25) | \ |
| (enum_c << 26)) |
| |
| static void snd_azf3328_mixer_reg_decode(struct azf3328_mixer_reg *r, unsigned long val) |
| { |
| r->reg = val & 0xff; |
| r->lchan_shift = (val >> 8) & 0x0f; |
| r->rchan_shift = (val >> 12) & 0x0f; |
| r->mask = (val >> 16) & 0xff; |
| r->invert = (val >> 24) & 1; |
| r->stereo = (val >> 25) & 1; |
| r->enum_c = (val >> 26) & 0x0f; |
| } |
| |
| /* |
| * mixer switches/volumes |
| */ |
| |
| #define AZF3328_MIXER_SWITCH(xname, reg, shift, invert) \ |
| { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ |
| .info = snd_azf3328_info_mixer, \ |
| .get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \ |
| .private_value = COMPOSE_MIXER_REG(reg, shift, 0, 0x1, invert, 0, 0), \ |
| } |
| |
| #define AZF3328_MIXER_VOL_STEREO(xname, reg, mask, invert) \ |
| { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ |
| .info = snd_azf3328_info_mixer, \ |
| .get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \ |
| .private_value = COMPOSE_MIXER_REG(reg, 8, 0, mask, invert, 1, 0), \ |
| } |
| |
| #define AZF3328_MIXER_VOL_MONO(xname, reg, mask, is_right_chan) \ |
| { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ |
| .info = snd_azf3328_info_mixer, \ |
| .get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \ |
| .private_value = COMPOSE_MIXER_REG(reg, is_right_chan ? 0 : 8, 0, mask, 1, 0, 0), \ |
| } |
| |
| #define AZF3328_MIXER_VOL_SPECIAL(xname, reg, mask, shift, invert) \ |
| { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ |
| .info = snd_azf3328_info_mixer, \ |
| .get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \ |
| .private_value = COMPOSE_MIXER_REG(reg, shift, 0, mask, invert, 0, 0), \ |
| } |
| |
| #define AZF3328_MIXER_ENUM(xname, reg, enum_c, shift) \ |
| { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ |
| .info = snd_azf3328_info_mixer_enum, \ |
| .get = snd_azf3328_get_mixer_enum, .put = snd_azf3328_put_mixer_enum, \ |
| .private_value = COMPOSE_MIXER_REG(reg, shift, 0, 0, 0, 0, enum_c), \ |
| } |
| |
| static int |
| snd_azf3328_info_mixer(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| struct azf3328_mixer_reg reg; |
| |
| snd_azf3328_dbgcallenter(); |
| snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); |
| uinfo->type = reg.mask == 1 ? |
| SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = reg.stereo + 1; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = reg.mask; |
| snd_azf3328_dbgcallleave(); |
| return 0; |
| } |
| |
| static int |
| snd_azf3328_get_mixer(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol); |
| struct azf3328_mixer_reg reg; |
| unsigned int oreg, val; |
| |
| snd_azf3328_dbgcallenter(); |
| snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); |
| |
| oreg = snd_azf3328_mixer_inw(chip, reg.reg); |
| val = (oreg >> reg.lchan_shift) & reg.mask; |
| if (reg.invert) |
| val = reg.mask - val; |
| ucontrol->value.integer.value[0] = val; |
| if (reg.stereo) { |
| val = (oreg >> reg.rchan_shift) & reg.mask; |
| if (reg.invert) |
| val = reg.mask - val; |
| ucontrol->value.integer.value[1] = val; |
| } |
| snd_azf3328_dbgmixer("get: %02x is %04x -> vol %02lx|%02lx " |
| "(shift %02d|%02d, mask %02x, inv. %d, stereo %d)\n", |
| reg.reg, oreg, |
| ucontrol->value.integer.value[0], ucontrol->value.integer.value[1], |
| reg.lchan_shift, reg.rchan_shift, reg.mask, reg.invert, reg.stereo); |
| snd_azf3328_dbgcallleave(); |
| return 0; |
| } |
| |
| static int |
| snd_azf3328_put_mixer(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol); |
| struct azf3328_mixer_reg reg; |
| unsigned int oreg, nreg, val; |
| |
| snd_azf3328_dbgcallenter(); |
| snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); |
| oreg = snd_azf3328_mixer_inw(chip, reg.reg); |
| val = ucontrol->value.integer.value[0] & reg.mask; |
| if (reg.invert) |
| val = reg.mask - val; |
| nreg = oreg & ~(reg.mask << reg.lchan_shift); |
| nreg |= (val << reg.lchan_shift); |
| if (reg.stereo) { |
| val = ucontrol->value.integer.value[1] & reg.mask; |
| if (reg.invert) |
| val = reg.mask - val; |
| nreg &= ~(reg.mask << reg.rchan_shift); |
| nreg |= (val << reg.rchan_shift); |
| } |
| if (reg.mask >= 0x07) /* it's a volume control, so better take care */ |
| snd_azf3328_mixer_write_volume_gradually( |
| chip, reg.reg, nreg >> 8, nreg & 0xff, |
| /* just set both channels, doesn't matter */ |
| SET_CHAN_LEFT|SET_CHAN_RIGHT, |
| 0); |
| else |
| snd_azf3328_mixer_outw(chip, reg.reg, nreg); |
| |
| snd_azf3328_dbgmixer("put: %02x to %02lx|%02lx, " |
| "oreg %04x; shift %02d|%02d -> nreg %04x; after: %04x\n", |
| reg.reg, ucontrol->value.integer.value[0], ucontrol->value.integer.value[1], |
| oreg, reg.lchan_shift, reg.rchan_shift, |
| nreg, snd_azf3328_mixer_inw(chip, reg.reg)); |
| snd_azf3328_dbgcallleave(); |
| return (nreg != oreg); |
| } |
| |
| static int |
| snd_azf3328_info_mixer_enum(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| static const char * const texts1[] = { |
| "Mic1", "Mic2" |
| }; |
| static const char * const texts2[] = { |
| "Mix", "Mic" |
| }; |
| static const char * const texts3[] = { |
| "Mic", "CD", "Video", "Aux", |
| "Line", "Mix", "Mix Mono", "Phone" |
| }; |
| static const char * const texts4[] = { |
| "pre 3D", "post 3D" |
| }; |
| struct azf3328_mixer_reg reg; |
| |
| snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = (reg.reg == IDX_MIXER_REC_SELECT) ? 2 : 1; |
| uinfo->value.enumerated.items = reg.enum_c; |
| if (uinfo->value.enumerated.item > reg.enum_c - 1U) |
| uinfo->value.enumerated.item = reg.enum_c - 1U; |
| if (reg.reg == IDX_MIXER_ADVCTL2) { |
| switch(reg.lchan_shift) { |
| case 8: /* modem out sel */ |
| strcpy(uinfo->value.enumerated.name, texts1[uinfo->value.enumerated.item]); |
| break; |
| case 9: /* mono sel source */ |
| strcpy(uinfo->value.enumerated.name, texts2[uinfo->value.enumerated.item]); |
| break; |
| case 15: /* PCM Out Path */ |
| strcpy(uinfo->value.enumerated.name, texts4[uinfo->value.enumerated.item]); |
| break; |
| } |
| } else |
| strcpy(uinfo->value.enumerated.name, texts3[uinfo->value.enumerated.item] |
| ); |
| return 0; |
| } |
| |
| static int |
| snd_azf3328_get_mixer_enum(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol); |
| struct azf3328_mixer_reg reg; |
| unsigned short val; |
| |
| snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); |
| val = snd_azf3328_mixer_inw(chip, reg.reg); |
| if (reg.reg == IDX_MIXER_REC_SELECT) { |
| ucontrol->value.enumerated.item[0] = (val >> 8) & (reg.enum_c - 1); |
| ucontrol->value.enumerated.item[1] = (val >> 0) & (reg.enum_c - 1); |
| } else |
| ucontrol->value.enumerated.item[0] = (val >> reg.lchan_shift) & (reg.enum_c - 1); |
| |
| snd_azf3328_dbgmixer("get_enum: %02x is %04x -> %d|%d (shift %02d, enum_c %d)\n", |
| reg.reg, val, ucontrol->value.enumerated.item[0], ucontrol->value.enumerated.item[1], |
| reg.lchan_shift, reg.enum_c); |
| return 0; |
| } |
| |
| static int |
| snd_azf3328_put_mixer_enum(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol); |
| struct azf3328_mixer_reg reg; |
| unsigned int oreg, nreg, val; |
| |
| snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); |
| oreg = snd_azf3328_mixer_inw(chip, reg.reg); |
| val = oreg; |
| if (reg.reg == IDX_MIXER_REC_SELECT) { |
| if (ucontrol->value.enumerated.item[0] > reg.enum_c - 1U || |
| ucontrol->value.enumerated.item[1] > reg.enum_c - 1U) |
| return -EINVAL; |
| val = (ucontrol->value.enumerated.item[0] << 8) | |
| (ucontrol->value.enumerated.item[1] << 0); |
| } else { |
| if (ucontrol->value.enumerated.item[0] > reg.enum_c - 1U) |
| return -EINVAL; |
| val &= ~((reg.enum_c - 1) << reg.lchan_shift); |
| val |= (ucontrol->value.enumerated.item[0] << reg.lchan_shift); |
| } |
| snd_azf3328_mixer_outw(chip, reg.reg, val); |
| nreg = val; |
| |
| snd_azf3328_dbgmixer("put_enum: %02x to %04x, oreg %04x\n", reg.reg, val, oreg); |
| return (nreg != oreg); |
| } |
| |
| static const struct snd_kcontrol_new snd_azf3328_mixer_controls[] __devinitdata = { |
| AZF3328_MIXER_SWITCH("Master Playback Switch", IDX_MIXER_PLAY_MASTER, 15, 1), |
| AZF3328_MIXER_VOL_STEREO("Master Playback Volume", IDX_MIXER_PLAY_MASTER, 0x1f, 1), |
| AZF3328_MIXER_SWITCH("Wave Playback Switch", IDX_MIXER_WAVEOUT, 15, 1), |
| AZF3328_MIXER_VOL_STEREO("Wave Playback Volume", IDX_MIXER_WAVEOUT, 0x1f, 1), |
| AZF3328_MIXER_SWITCH("Wave 3D Bypass Playback Switch", IDX_MIXER_ADVCTL2, 7, 1), |
| AZF3328_MIXER_SWITCH("FM Playback Switch", IDX_MIXER_FMSYNTH, 15, 1), |
| AZF3328_MIXER_VOL_STEREO("FM Playback Volume", IDX_MIXER_FMSYNTH, 0x1f, 1), |
| AZF3328_MIXER_SWITCH("CD Playback Switch", IDX_MIXER_CDAUDIO, 15, 1), |
| AZF3328_MIXER_VOL_STEREO("CD Playback Volume", IDX_MIXER_CDAUDIO, 0x1f, 1), |
| AZF3328_MIXER_SWITCH("Capture Switch", IDX_MIXER_REC_VOLUME, 15, 1), |
| AZF3328_MIXER_VOL_STEREO("Capture Volume", IDX_MIXER_REC_VOLUME, 0x0f, 0), |
| AZF3328_MIXER_ENUM("Capture Source", IDX_MIXER_REC_SELECT, 8, 0), |
| AZF3328_MIXER_SWITCH("Mic Playback Switch", IDX_MIXER_MIC, 15, 1), |
| AZF3328_MIXER_VOL_MONO("Mic Playback Volume", IDX_MIXER_MIC, 0x1f, 1), |
| AZF3328_MIXER_SWITCH("Mic Boost (+20dB)", IDX_MIXER_MIC, 6, 0), |
| AZF3328_MIXER_SWITCH("Line Playback Switch", IDX_MIXER_LINEIN, 15, 1), |
| AZF3328_MIXER_VOL_STEREO("Line Playback Volume", IDX_MIXER_LINEIN, 0x1f, 1), |
| AZF3328_MIXER_SWITCH("PC Speaker Playback Switch", IDX_MIXER_PCBEEP, 15, 1), |
| AZF3328_MIXER_VOL_SPECIAL("PC Speaker Playback Volume", IDX_MIXER_PCBEEP, 0x0f, 1, 1), |
| AZF3328_MIXER_SWITCH("Video Playback Switch", IDX_MIXER_VIDEO, 15, 1), |
| AZF3328_MIXER_VOL_STEREO("Video Playback Volume", IDX_MIXER_VIDEO, 0x1f, 1), |
| AZF3328_MIXER_SWITCH("Aux Playback Switch", IDX_MIXER_AUX, 15, 1), |
| AZF3328_MIXER_VOL_STEREO("Aux Playback Volume", IDX_MIXER_AUX, 0x1f, 1), |
| AZF3328_MIXER_SWITCH("Modem Playback Switch", IDX_MIXER_MODEMOUT, 15, 1), |
| AZF3328_MIXER_VOL_MONO("Modem Playback Volume", IDX_MIXER_MODEMOUT, 0x1f, 1), |
| AZF3328_MIXER_SWITCH("Modem Capture Switch", IDX_MIXER_MODEMIN, 15, 1), |
| AZF3328_MIXER_VOL_MONO("Modem Capture Volume", IDX_MIXER_MODEMIN, 0x1f, 1), |
| AZF3328_MIXER_ENUM("Mic Select", IDX_MIXER_ADVCTL2, 2, 8), |
| AZF3328_MIXER_ENUM("Mono Output Select", IDX_MIXER_ADVCTL2, 2, 9), |
| AZF3328_MIXER_ENUM("PCM", IDX_MIXER_ADVCTL2, 2, 15), /* PCM Out Path, place in front since it controls *both* 3D and Bass/Treble! */ |
| AZF3328_MIXER_VOL_SPECIAL("Tone Control - Treble", IDX_MIXER_BASSTREBLE, 0x07, 1, 0), |
| AZF3328_MIXER_VOL_SPECIAL("Tone Control - Bass", IDX_MIXER_BASSTREBLE, 0x07, 9, 0), |
| AZF3328_MIXER_SWITCH("3D Control - Switch", IDX_MIXER_ADVCTL2, 13, 0), |
| AZF3328_MIXER_VOL_SPECIAL("3D Control - Width", IDX_MIXER_ADVCTL1, 0x07, 1, 0), /* "3D Width" */ |
| AZF3328_MIXER_VOL_SPECIAL("3D Control - Depth", IDX_MIXER_ADVCTL1, 0x03, 8, 0), /* "Hifi 3D" */ |
| #if MIXER_TESTING |
| AZF3328_MIXER_SWITCH("0", IDX_MIXER_ADVCTL2, 0, 0), |
| AZF3328_MIXER_SWITCH("1", IDX_MIXER_ADVCTL2, 1, 0), |
| AZF3328_MIXER_SWITCH("2", IDX_MIXER_ADVCTL2, 2, 0), |
| AZF3328_MIXER_SWITCH("3", IDX_MIXER_ADVCTL2, 3, 0), |
| AZF3328_MIXER_SWITCH("4", IDX_MIXER_ADVCTL2, 4, 0), |
| AZF3328_MIXER_SWITCH("5", IDX_MIXER_ADVCTL2, 5, 0), |
| AZF3328_MIXER_SWITCH("6", IDX_MIXER_ADVCTL2, 6, 0), |
| AZF3328_MIXER_SWITCH("7", IDX_MIXER_ADVCTL2, 7, 0), |
| AZF3328_MIXER_SWITCH("8", IDX_MIXER_ADVCTL2, 8, 0), |
| AZF3328_MIXER_SWITCH("9", IDX_MIXER_ADVCTL2, 9, 0), |
| AZF3328_MIXER_SWITCH("10", IDX_MIXER_ADVCTL2, 10, 0), |
| AZF3328_MIXER_SWITCH("11", IDX_MIXER_ADVCTL2, 11, 0), |
| AZF3328_MIXER_SWITCH("12", IDX_MIXER_ADVCTL2, 12, 0), |
| AZF3328_MIXER_SWITCH("13", IDX_MIXER_ADVCTL2, 13, 0), |
| AZF3328_MIXER_SWITCH("14", IDX_MIXER_ADVCTL2, 14, 0), |
| AZF3328_MIXER_SWITCH("15", IDX_MIXER_ADVCTL2, 15, 0), |
| #endif |
| }; |
| |
| static const u16 __devinitdata snd_azf3328_init_values[][2] = { |
| { IDX_MIXER_PLAY_MASTER, MIXER_MUTE_MASK|0x1f1f }, |
| { IDX_MIXER_MODEMOUT, MIXER_MUTE_MASK|0x1f1f }, |
| { IDX_MIXER_BASSTREBLE, 0x0000 }, |
| { IDX_MIXER_PCBEEP, MIXER_MUTE_MASK|0x1f1f }, |
| { IDX_MIXER_MODEMIN, MIXER_MUTE_MASK|0x1f1f }, |
| { IDX_MIXER_MIC, MIXER_MUTE_MASK|0x001f }, |
| { IDX_MIXER_LINEIN, MIXER_MUTE_MASK|0x1f1f }, |
| { IDX_MIXER_CDAUDIO, MIXER_MUTE_MASK|0x1f1f }, |
| { IDX_MIXER_VIDEO, MIXER_MUTE_MASK|0x1f1f }, |
| { IDX_MIXER_AUX, MIXER_MUTE_MASK|0x1f1f }, |
| { IDX_MIXER_WAVEOUT, MIXER_MUTE_MASK|0x1f1f }, |
| { IDX_MIXER_FMSYNTH, MIXER_MUTE_MASK|0x1f1f }, |
| { IDX_MIXER_REC_VOLUME, MIXER_MUTE_MASK|0x0707 }, |
| }; |
| |
| static int __devinit |
| snd_azf3328_mixer_new(struct snd_azf3328 *chip) |
| { |
| struct snd_card *card; |
| const struct snd_kcontrol_new *sw; |
| unsigned int idx; |
| int err; |
| |
| snd_azf3328_dbgcallenter(); |
| snd_assert(chip != NULL && chip->card != NULL, return -EINVAL); |
| |
| card = chip->card; |
| |
| /* mixer reset */ |
| snd_azf3328_mixer_outw(chip, IDX_MIXER_RESET, 0x0000); |
| |
| /* mute and zero volume channels */ |
| for (idx = 0; idx < ARRAY_SIZE(snd_azf3328_init_values); idx++) { |
| snd_azf3328_mixer_outw(chip, |
| snd_azf3328_init_values[idx][0], |
| snd_azf3328_init_values[idx][1]); |
| } |
| |
| /* add mixer controls */ |
| sw = snd_azf3328_mixer_controls; |
| for (idx = 0; idx < ARRAY_SIZE(snd_azf3328_mixer_controls); idx++, sw++) { |
| if ((err = snd_ctl_add(chip->card, snd_ctl_new1(sw, chip))) < 0) |
| return err; |
| } |
| snd_component_add(card, "AZF3328 mixer"); |
| strcpy(card->mixername, "AZF3328 mixer"); |
| |
| snd_azf3328_dbgcallleave(); |
| return 0; |
| } |
| |
| static int |
| snd_azf3328_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *hw_params) |
| { |
| int res; |
| snd_azf3328_dbgcallenter(); |
| res = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params)); |
| snd_azf3328_dbgcallleave(); |
| return res; |
| } |
| |
| static int |
| snd_azf3328_hw_free(struct snd_pcm_substream *substream) |
| { |
| snd_azf3328_dbgcallenter(); |
| snd_pcm_lib_free_pages(substream); |
| snd_azf3328_dbgcallleave(); |
| return 0; |
| } |
| |
| static void |
| snd_azf3328_setfmt(struct snd_azf3328 *chip, |
| unsigned int reg, |
| unsigned int bitrate, |
| unsigned int format_width, |
| unsigned int channels |
| ) |
| { |
| u16 val = 0xff00; |
| unsigned long flags; |
| |
| snd_azf3328_dbgcallenter(); |
| switch (bitrate) { |
| case 4000: val |= SOUNDFORMAT_FREQ_SUSPECTED_4000; break; |
| case 4800: val |= SOUNDFORMAT_FREQ_SUSPECTED_4800; break; |
| case 5512: val |= SOUNDFORMAT_FREQ_5510; break; /* the AZF3328 names it "5510" for some strange reason */ |
| case 6620: val |= SOUNDFORMAT_FREQ_6620; break; |
| case 8000: val |= SOUNDFORMAT_FREQ_8000; break; |
| case 9600: val |= SOUNDFORMAT_FREQ_9600; break; |
| case 11025: val |= SOUNDFORMAT_FREQ_11025; break; |
| case 13240: val |= SOUNDFORMAT_FREQ_SUSPECTED_13240; break; |
| case 16000: val |= SOUNDFORMAT_FREQ_16000; break; |
| case 22050: val |= SOUNDFORMAT_FREQ_22050; break; |
| case 32000: val |= SOUNDFORMAT_FREQ_32000; break; |
| case 44100: val |= SOUNDFORMAT_FREQ_44100; break; |
| case 48000: val |= SOUNDFORMAT_FREQ_48000; break; |
| case 66200: val |= SOUNDFORMAT_FREQ_SUSPECTED_66200; break; |
| default: |
| snd_printk(KERN_WARNING "unknown bitrate %d, assuming 44.1kHz!\n", bitrate); |
| val |= SOUNDFORMAT_FREQ_44100; |
| break; |
| } |
| /* val = 0xff07; 3m27.993s (65301Hz; -> 64000Hz???) hmm, 66120, 65967, 66123 */ |
| /* val = 0xff09; 17m15.098s (13123,478Hz; -> 12000Hz???) hmm, 13237.2Hz? */ |
| /* val = 0xff0a; 47m30.599s (4764,891Hz; -> 4800Hz???) yup, 4803Hz */ |
| /* val = 0xff0c; 57m0.510s (4010,263Hz; -> 4000Hz???) yup, 4003Hz */ |
| /* val = 0xff05; 5m11.556s (... -> 44100Hz) */ |
| /* val = 0xff03; 10m21.529s (21872,463Hz; -> 22050Hz???) */ |
| /* val = 0xff0f; 20m41.883s (10937,993Hz; -> 11025Hz???) */ |
| /* val = 0xff0d; 41m23.135s (5523,600Hz; -> 5512Hz???) */ |
| /* val = 0xff0e; 28m30.777s (8017Hz; -> 8000Hz???) */ |
| |
| if (channels == 2) |
| val |= SOUNDFORMAT_FLAG_2CHANNELS; |
| |
| if (format_width == 16) |
| val |= SOUNDFORMAT_FLAG_16BIT; |
| |
| spin_lock_irqsave(&chip->reg_lock, flags); |
| |
| /* set bitrate/format */ |
| snd_azf3328_codec_outw(chip, reg, val); |
| |
| /* changing the bitrate/format settings switches off the |
| * audio output with an annoying click in case of 8/16bit format change |
| * (maybe shutting down DAC/ADC?), thus immediately |
| * do some tweaking to reenable it and get rid of the clicking |
| * (FIXME: yes, it works, but what exactly am I doing here?? :) |
| * FIXME: does this have some side effects for full-duplex |
| * or other dramatic side effects? */ |
| if (reg == IDX_IO_PLAY_SOUNDFORMAT) /* only do it for playback */ |
| snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, |
| snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) | |
| DMA_PLAY_SOMETHING1 | |
| DMA_PLAY_SOMETHING2 | |
| SOMETHING_ALMOST_ALWAYS_SET | |
| DMA_EPILOGUE_SOMETHING | |
| DMA_SOMETHING_ELSE |
| ); |
| |
| spin_unlock_irqrestore(&chip->reg_lock, flags); |
| snd_azf3328_dbgcallleave(); |
| } |
| |
| static void |
| snd_azf3328_setdmaa(struct snd_azf3328 *chip, |
| long unsigned int addr, |
| unsigned int count, |
| unsigned int size, |
| int do_recording) |
| { |
| unsigned long flags, portbase; |
| unsigned int is_running; |
| |
| snd_azf3328_dbgcallenter(); |
| if (do_recording) { |
| /* access capture registers, i.e. skip playback reg section */ |
| portbase = chip->codec_port + 0x20; |
| is_running = chip->is_recording; |
| } else { |
| /* access the playback register section */ |
| portbase = chip->codec_port + 0x00; |
| is_running = chip->is_playing; |
| } |
| |
| /* AZF3328 uses a two buffer pointer DMA playback approach */ |
| if (!is_running) { |
| unsigned long addr_area2; |
| unsigned long count_areas, count_tmp; /* width 32bit -- overflow!! */ |
| count_areas = size/2; |
| addr_area2 = addr+count_areas; |
| count_areas--; /* max. index */ |
| snd_azf3328_dbgplay("set DMA: buf1 %08lx[%lu], buf2 %08lx[%lu]\n", addr, count_areas, addr_area2, count_areas); |
| |
| /* build combined I/O buffer length word */ |
| count_tmp = count_areas; |
| count_areas |= (count_tmp << 16); |
| spin_lock_irqsave(&chip->reg_lock, flags); |
| outl(addr, portbase + IDX_IO_PLAY_DMA_START_1); |
| outl(addr_area2, portbase + IDX_IO_PLAY_DMA_START_2); |
| outl(count_areas, portbase + IDX_IO_PLAY_DMA_LEN_1); |
| spin_unlock_irqrestore(&chip->reg_lock, flags); |
| } |
| snd_azf3328_dbgcallleave(); |
| } |
| |
| static int |
| snd_azf3328_playback_prepare(struct snd_pcm_substream *substream) |
| { |
| #if 0 |
| struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| unsigned int size = snd_pcm_lib_buffer_bytes(substream); |
| unsigned int count = snd_pcm_lib_period_bytes(substream); |
| #endif |
| |
| snd_azf3328_dbgcallenter(); |
| #if 0 |
| snd_azf3328_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT, |
| runtime->rate, |
| snd_pcm_format_width(runtime->format), |
| runtime->channels); |
| snd_azf3328_setdmaa(chip, runtime->dma_addr, count, size, 0); |
| #endif |
| snd_azf3328_dbgcallleave(); |
| return 0; |
| } |
| |
| static int |
| snd_azf3328_capture_prepare(struct snd_pcm_substream *substream) |
| { |
| #if 0 |
| struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| unsigned int size = snd_pcm_lib_buffer_bytes(substream); |
| unsigned int count = snd_pcm_lib_period_bytes(substream); |
| #endif |
| |
| snd_azf3328_dbgcallenter(); |
| #if 0 |
| snd_azf3328_setfmt(chip, IDX_IO_REC_SOUNDFORMAT, |
| runtime->rate, |
| snd_pcm_format_width(runtime->format), |
| runtime->channels); |
| snd_azf3328_setdmaa(chip, runtime->dma_addr, count, size, 1); |
| #endif |
| snd_azf3328_dbgcallleave(); |
| return 0; |
| } |
| |
| static int |
| snd_azf3328_playback_trigger(struct snd_pcm_substream *substream, int cmd) |
| { |
| struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| int result = 0; |
| unsigned int status1; |
| |
| snd_azf3328_dbgcalls("snd_azf3328_playback_trigger cmd %d\n", cmd); |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| snd_azf3328_dbgplay("START PLAYBACK\n"); |
| |
| /* mute WaveOut */ |
| snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1); |
| |
| snd_azf3328_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT, |
| runtime->rate, |
| snd_pcm_format_width(runtime->format), |
| runtime->channels); |
| |
| spin_lock(&chip->reg_lock); |
| /* stop playback */ |
| status1 = snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS); |
| status1 &= ~DMA_RESUME; |
| snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1); |
| |
| /* FIXME: clear interrupts or what??? */ |
| snd_azf3328_codec_outw(chip, IDX_IO_PLAY_IRQTYPE, 0xffff); |
| spin_unlock(&chip->reg_lock); |
| |
| snd_azf3328_setdmaa(chip, runtime->dma_addr, |
| snd_pcm_lib_period_bytes(substream), |
| snd_pcm_lib_buffer_bytes(substream), |
| 0); |
| |
| spin_lock(&chip->reg_lock); |
| #ifdef WIN9X |
| /* FIXME: enable playback/recording??? */ |
| status1 |= DMA_PLAY_SOMETHING1 | DMA_PLAY_SOMETHING2; |
| snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1); |
| |
| /* start playback again */ |
| /* FIXME: what is this value (0x0010)??? */ |
| status1 |= DMA_RESUME | DMA_EPILOGUE_SOMETHING; |
| snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1); |
| #else /* NT4 */ |
| snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, |
| 0x0000); |
| snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, |
| DMA_PLAY_SOMETHING1); |
| snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, |
| DMA_PLAY_SOMETHING1 | |
| DMA_PLAY_SOMETHING2); |
| snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, |
| DMA_RESUME | |
| SOMETHING_ALMOST_ALWAYS_SET | |
| DMA_EPILOGUE_SOMETHING | |
| DMA_SOMETHING_ELSE); |
| #endif |
| spin_unlock(&chip->reg_lock); |
| |
| /* now unmute WaveOut */ |
| snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 0); |
| |
| chip->is_playing = 1; |
| snd_azf3328_dbgplay("STARTED PLAYBACK\n"); |
| break; |
| case SNDRV_PCM_TRIGGER_RESUME: |
| snd_azf3328_dbgplay("RESUME PLAYBACK\n"); |
| /* resume playback if we were active */ |
| if (chip->is_playing) |
| snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, |
| snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) | DMA_RESUME); |
| break; |
| case SNDRV_PCM_TRIGGER_STOP: |
| snd_azf3328_dbgplay("STOP PLAYBACK\n"); |
| |
| /* mute WaveOut */ |
| snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1); |
| |
| spin_lock(&chip->reg_lock); |
| /* stop playback */ |
| status1 = snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS); |
| |
| status1 &= ~DMA_RESUME; |
| snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1); |
| |
| /* hmm, is this really required? we're resetting the same bit |
| * immediately thereafter... */ |
| status1 |= DMA_PLAY_SOMETHING1; |
| snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1); |
| |
| status1 &= ~DMA_PLAY_SOMETHING1; |
| snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1); |
| spin_unlock(&chip->reg_lock); |
| |
| /* now unmute WaveOut */ |
| snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 0); |
| chip->is_playing = 0; |
| snd_azf3328_dbgplay("STOPPED PLAYBACK\n"); |
| break; |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| snd_azf3328_dbgplay("SUSPEND PLAYBACK\n"); |
| /* make sure playback is stopped */ |
| snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, |
| snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) & ~DMA_RESUME); |
| break; |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n"); |
| break; |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n"); |
| break; |
| default: |
| printk(KERN_ERR "FIXME: unknown trigger mode!\n"); |
| return -EINVAL; |
| } |
| |
| snd_azf3328_dbgcallleave(); |
| return result; |
| } |
| |
| /* this is just analogous to playback; I'm not quite sure whether recording |
| * should actually be triggered like that */ |
| static int |
| snd_azf3328_capture_trigger(struct snd_pcm_substream *substream, int cmd) |
| { |
| struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| int result = 0; |
| unsigned int status1; |
| |
| snd_azf3328_dbgcalls("snd_azf3328_capture_trigger cmd %d\n", cmd); |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| |
| snd_azf3328_dbgplay("START CAPTURE\n"); |
| |
| snd_azf3328_setfmt(chip, IDX_IO_REC_SOUNDFORMAT, |
| runtime->rate, |
| snd_pcm_format_width(runtime->format), |
| runtime->channels); |
| |
| spin_lock(&chip->reg_lock); |
| /* stop recording */ |
| status1 = snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS); |
| status1 &= ~DMA_RESUME; |
| snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1); |
| |
| /* FIXME: clear interrupts or what??? */ |
| snd_azf3328_codec_outw(chip, IDX_IO_REC_IRQTYPE, 0xffff); |
| spin_unlock(&chip->reg_lock); |
| |
| snd_azf3328_setdmaa(chip, runtime->dma_addr, |
| snd_pcm_lib_period_bytes(substream), |
| snd_pcm_lib_buffer_bytes(substream), |
| 1); |
| |
| spin_lock(&chip->reg_lock); |
| #ifdef WIN9X |
| /* FIXME: enable playback/recording??? */ |
| status1 |= DMA_PLAY_SOMETHING1 | DMA_PLAY_SOMETHING2; |
| snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1); |
| |
| /* start capture again */ |
| /* FIXME: what is this value (0x0010)??? */ |
| status1 |= DMA_RESUME | DMA_EPILOGUE_SOMETHING; |
| snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1); |
| #else |
| snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, |
| 0x0000); |
| snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, |
| DMA_PLAY_SOMETHING1); |
| snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, |
| DMA_PLAY_SOMETHING1 | |
| DMA_PLAY_SOMETHING2); |
| snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, |
| DMA_RESUME | |
| SOMETHING_ALMOST_ALWAYS_SET | |
| DMA_EPILOGUE_SOMETHING | |
| DMA_SOMETHING_ELSE); |
| #endif |
| spin_unlock(&chip->reg_lock); |
| |
| chip->is_recording = 1; |
| snd_azf3328_dbgplay("STARTED CAPTURE\n"); |
| break; |
| case SNDRV_PCM_TRIGGER_RESUME: |
| snd_azf3328_dbgplay("RESUME CAPTURE\n"); |
| /* resume recording if we were active */ |
| if (chip->is_recording) |
| snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, |
| snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS) | DMA_RESUME); |
| break; |
| case SNDRV_PCM_TRIGGER_STOP: |
| snd_azf3328_dbgplay("STOP CAPTURE\n"); |
| |
| spin_lock(&chip->reg_lock); |
| /* stop recording */ |
| status1 = snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS); |
| |
| status1 &= ~DMA_RESUME; |
| snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1); |
| |
| status1 |= DMA_PLAY_SOMETHING1; |
| snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1); |
| |
| status1 &= ~DMA_PLAY_SOMETHING1; |
| snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1); |
| spin_unlock(&chip->reg_lock); |
| |
| chip->is_recording = 0; |
| snd_azf3328_dbgplay("STOPPED CAPTURE\n"); |
| break; |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| snd_azf3328_dbgplay("SUSPEND CAPTURE\n"); |
| /* make sure recording is stopped */ |
| snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, |
| snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS) & ~DMA_RESUME); |
| break; |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n"); |
| break; |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n"); |
| break; |
| default: |
| printk(KERN_ERR "FIXME: unknown trigger mode!\n"); |
| return -EINVAL; |
| } |
| |
| snd_azf3328_dbgcallleave(); |
| return result; |
| } |
| |
| static snd_pcm_uframes_t |
| snd_azf3328_playback_pointer(struct snd_pcm_substream *substream) |
| { |
| struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); |
| unsigned long bufptr, result; |
| snd_pcm_uframes_t frmres; |
| |
| #ifdef QUERY_HARDWARE |
| bufptr = inl(chip->codec_port+IDX_IO_PLAY_DMA_START_1); |
| #else |
| bufptr = substream->runtime->dma_addr; |
| #endif |
| result = inl(chip->codec_port+IDX_IO_PLAY_DMA_CURRPOS); |
| |
| /* calculate offset */ |
| result -= bufptr; |
| frmres = bytes_to_frames( substream->runtime, result); |
| snd_azf3328_dbgplay("PLAY @ 0x%8lx, frames %8ld\n", result, frmres); |
| return frmres; |
| } |
| |
| static snd_pcm_uframes_t |
| snd_azf3328_capture_pointer(struct snd_pcm_substream *substream) |
| { |
| struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); |
| unsigned long bufptr, result; |
| snd_pcm_uframes_t frmres; |
| |
| #ifdef QUERY_HARDWARE |
| bufptr = inl(chip->codec_port+IDX_IO_REC_DMA_START_1); |
| #else |
| bufptr = substream->runtime->dma_addr; |
| #endif |
| result = inl(chip->codec_port+IDX_IO_REC_DMA_CURRPOS); |
| |
| /* calculate offset */ |
| result -= bufptr; |
| frmres = bytes_to_frames( substream->runtime, result); |
| snd_azf3328_dbgplay("REC @ 0x%8lx, frames %8ld\n", result, frmres); |
| return frmres; |
| } |
| |
| static irqreturn_t |
| snd_azf3328_interrupt(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct snd_azf3328 *chip = dev_id; |
| u8 status, which; |
| static unsigned long irq_count; |
| |
| status = snd_azf3328_codec_inb(chip, IDX_IO_IRQSTATUS); |
| |
| /* fast path out, to ease interrupt sharing */ |
| if (!(status & (IRQ_PLAYBACK|IRQ_RECORDING|IRQ_MPU401|IRQ_TIMER))) |
| return IRQ_NONE; /* must be interrupt for another device */ |
| |
| snd_azf3328_dbgplay("Interrupt %ld!\nIDX_IO_PLAY_FLAGS %04x, IDX_IO_PLAY_IRQTYPE %04x, IDX_IO_IRQSTATUS %04x\n", |
| irq_count, |
| snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS), |
| snd_azf3328_codec_inw(chip, IDX_IO_PLAY_IRQTYPE), |
| status); |
| |
| if (status & IRQ_TIMER) { |
| /* snd_azf3328_dbgplay("timer %ld\n", inl(chip->codec_port+IDX_IO_TIMER_VALUE) & TIMER_VALUE_MASK); */ |
| if (chip->timer) |
| snd_timer_interrupt(chip->timer, chip->timer->sticks); |
| /* ACK timer */ |
| spin_lock(&chip->reg_lock); |
| snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x07); |
| spin_unlock(&chip->reg_lock); |
| snd_azf3328_dbgplay("azt3328: timer IRQ\n"); |
| } |
| if (status & IRQ_PLAYBACK) { |
| spin_lock(&chip->reg_lock); |
| which = snd_azf3328_codec_inb(chip, IDX_IO_PLAY_IRQTYPE); |
| /* ack all IRQ types immediately */ |
| snd_azf3328_codec_outb(chip, IDX_IO_PLAY_IRQTYPE, which); |
| spin_unlock(&chip->reg_lock); |
| |
| if (chip->pcm && chip->playback_substream) { |
| snd_pcm_period_elapsed(chip->playback_substream); |
| snd_azf3328_dbgplay("PLAY period done (#%x), @ %x\n", |
| which, |
| inl(chip->codec_port+IDX_IO_PLAY_DMA_CURRPOS)); |
| } else |
| snd_azf3328_dbgplay("azt3328: ouch, irq handler problem!\n"); |
| if (which & IRQ_PLAY_SOMETHING) |
| snd_azf3328_dbgplay("azt3328: unknown play IRQ type occurred, please report!\n"); |
| } |
| if (status & IRQ_RECORDING) { |
| spin_lock(&chip->reg_lock); |
| which = snd_azf3328_codec_inb(chip, IDX_IO_REC_IRQTYPE); |
| /* ack all IRQ types immediately */ |
| snd_azf3328_codec_outb(chip, IDX_IO_REC_IRQTYPE, which); |
| spin_unlock(&chip->reg_lock); |
| |
| if (chip->pcm && chip->capture_substream) { |
| snd_pcm_period_elapsed(chip->capture_substream); |
| snd_azf3328_dbgplay("REC period done (#%x), @ %x\n", |
| which, |
| inl(chip->codec_port+IDX_IO_REC_DMA_CURRPOS)); |
| } else |
| snd_azf3328_dbgplay("azt3328: ouch, irq handler problem!\n"); |
| if (which & IRQ_REC_SOMETHING) |
| snd_azf3328_dbgplay("azt3328: unknown rec IRQ type occurred, please report!\n"); |
| } |
| /* MPU401 has less critical IRQ requirements |
| * than timer and playback/recording, right? */ |
| if (status & IRQ_MPU401) { |
| snd_mpu401_uart_interrupt(irq, chip->rmidi->private_data, regs); |
| |
| /* hmm, do we have to ack the IRQ here somehow? |
| * If so, then I don't know how... */ |
| snd_azf3328_dbgplay("azt3328: MPU401 IRQ\n"); |
| } |
| irq_count++; |
| return IRQ_HANDLED; |
| } |
| |
| /*****************************************************************/ |
| |
| static const struct snd_pcm_hardware snd_azf3328_playback = |
| { |
| /* FIXME!! Correct? */ |
| .info = SNDRV_PCM_INFO_MMAP | |
| SNDRV_PCM_INFO_INTERLEAVED | |
| SNDRV_PCM_INFO_MMAP_VALID, |
| .formats = SNDRV_PCM_FMTBIT_S8 | |
| SNDRV_PCM_FMTBIT_U8 | |
| SNDRV_PCM_FMTBIT_S16_LE | |
| SNDRV_PCM_FMTBIT_U16_LE, |
| .rates = SNDRV_PCM_RATE_5512 | |
| SNDRV_PCM_RATE_8000_48000 | |
| SNDRV_PCM_RATE_KNOT, |
| .rate_min = 4000, |
| .rate_max = 66200, |
| .channels_min = 1, |
| .channels_max = 2, |
| .buffer_bytes_max = 65536, |
| .period_bytes_min = 64, |
| .period_bytes_max = 65536, |
| .periods_min = 1, |
| .periods_max = 1024, |
| /* FIXME: maybe that card actually has a FIFO? |
| * Hmm, it seems newer revisions do have one, but we still don't know |
| * its size... */ |
| .fifo_size = 0, |
| }; |
| |
| static const struct snd_pcm_hardware snd_azf3328_capture = |
| { |
| /* FIXME */ |
| .info = SNDRV_PCM_INFO_MMAP | |
| SNDRV_PCM_INFO_INTERLEAVED | |
| SNDRV_PCM_INFO_MMAP_VALID, |
| .formats = SNDRV_PCM_FMTBIT_S8 | |
| SNDRV_PCM_FMTBIT_U8 | |
| SNDRV_PCM_FMTBIT_S16_LE | |
| SNDRV_PCM_FMTBIT_U16_LE, |
| .rates = SNDRV_PCM_RATE_5512 | |
| SNDRV_PCM_RATE_8000_48000 | |
| SNDRV_PCM_RATE_KNOT, |
| .rate_min = 4000, |
| .rate_max = 66200, |
| .channels_min = 1, |
| .channels_max = 2, |
| .buffer_bytes_max = 65536, |
| .period_bytes_min = 64, |
| .period_bytes_max = 65536, |
| .periods_min = 1, |
| .periods_max = 1024, |
| .fifo_size = 0, |
| }; |
| |
| |
| static unsigned int snd_azf3328_fixed_rates[] = { |
| 4000, 4800, 5512, 6620, 8000, 9600, 11025, 13240, 16000, 22050, 32000, |
| 44100, 48000, 66200 }; |
| static struct snd_pcm_hw_constraint_list snd_azf3328_hw_constraints_rates = { |
| .count = ARRAY_SIZE(snd_azf3328_fixed_rates), |
| .list = snd_azf3328_fixed_rates, |
| .mask = 0, |
| }; |
| |
| /*****************************************************************/ |
| |
| static int |
| snd_azf3328_playback_open(struct snd_pcm_substream *substream) |
| { |
| struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| |
| snd_azf3328_dbgcallenter(); |
| chip->playback_substream = substream; |
| runtime->hw = snd_azf3328_playback; |
| snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, |
| &snd_azf3328_hw_constraints_rates); |
| snd_azf3328_dbgcallleave(); |
| return 0; |
| } |
| |
| static int |
| snd_azf3328_capture_open(struct snd_pcm_substream *substream) |
| { |
| struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| |
| snd_azf3328_dbgcallenter(); |
| chip->capture_substream = substream; |
| runtime->hw = snd_azf3328_capture; |
| snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, |
| &snd_azf3328_hw_constraints_rates); |
| snd_azf3328_dbgcallleave(); |
| return 0; |
| } |
| |
| static int |
| snd_azf3328_playback_close(struct snd_pcm_substream *substream) |
| { |
| struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); |
| |
| snd_azf3328_dbgcallenter(); |
| |
| chip->playback_substream = NULL; |
| snd_azf3328_dbgcallleave(); |
| return 0; |
| } |
| |
| static int |
| snd_azf3328_capture_close(struct snd_pcm_substream *substream) |
| { |
| struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); |
| |
| snd_azf3328_dbgcallenter(); |
| chip->capture_substream = NULL; |
| snd_azf3328_dbgcallleave(); |
| return 0; |
| } |
| |
| /******************************************************************/ |
| |
| static struct snd_pcm_ops snd_azf3328_playback_ops = { |
| .open = snd_azf3328_playback_open, |
| .close = snd_azf3328_playback_close, |
| .ioctl = snd_pcm_lib_ioctl, |
| .hw_params = snd_azf3328_hw_params, |
| .hw_free = snd_azf3328_hw_free, |
| .prepare = snd_azf3328_playback_prepare, |
| .trigger = snd_azf3328_playback_trigger, |
| .pointer = snd_azf3328_playback_pointer |
| }; |
| |
| static struct snd_pcm_ops snd_azf3328_capture_ops = { |
| .open = snd_azf3328_capture_open, |
| .close = snd_azf3328_capture_close, |
| .ioctl = snd_pcm_lib_ioctl, |
| .hw_params = snd_azf3328_hw_params, |
| .hw_free = snd_azf3328_hw_free, |
| .prepare = snd_azf3328_capture_prepare, |
| .trigger = snd_azf3328_capture_trigger, |
| .pointer = snd_azf3328_capture_pointer |
| }; |
| |
| static int __devinit |
| snd_azf3328_pcm(struct snd_azf3328 *chip, int device) |
| { |
| struct snd_pcm *pcm; |
| int err; |
| |
| snd_azf3328_dbgcallenter(); |
| if ((err = snd_pcm_new(chip->card, "AZF3328 DSP", device, 1, 1, &pcm)) < 0) |
| return err; |
| snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_azf3328_playback_ops); |
| snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_azf3328_capture_ops); |
| |
| pcm->private_data = chip; |
| pcm->info_flags = 0; |
| strcpy(pcm->name, chip->card->shortname); |
| chip->pcm = pcm; |
| |
| snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, |
| snd_dma_pci_data(chip->pci), 64*1024, 64*1024); |
| |
| snd_azf3328_dbgcallleave(); |
| return 0; |
| } |
| |
| /******************************************************************/ |
| |
| #ifdef SUPPORT_JOYSTICK |
| static int __devinit |
| snd_azf3328_config_joystick(struct snd_azf3328 *chip, int dev) |
| { |
| struct gameport *gp; |
| struct resource *r; |
| |
| if (!joystick[dev]) |
| return -ENODEV; |
| |
| if (!(r = request_region(0x200, 8, "AZF3328 gameport"))) { |
| printk(KERN_WARNING "azt3328: cannot reserve joystick ports\n"); |
| return -EBUSY; |
| } |
| |
| chip->gameport = gp = gameport_allocate_port(); |
| if (!gp) { |
| printk(KERN_ERR "azt3328: cannot allocate memory for gameport\n"); |
| release_and_free_resource(r); |
| return -ENOMEM; |
| } |
| |
| gameport_set_name(gp, "AZF3328 Gameport"); |
| gameport_set_phys(gp, "pci%s/gameport0", pci_name(chip->pci)); |
| gameport_set_dev_parent(gp, &chip->pci->dev); |
| gp->io = 0x200; |
| gameport_set_port_data(gp, r); |
| |
| snd_azf3328_io2_outb(chip, IDX_IO2_LEGACY_ADDR, |
| snd_azf3328_io2_inb(chip, IDX_IO2_LEGACY_ADDR) | LEGACY_JOY); |
| |
| gameport_register_port(chip->gameport); |
| |
| return 0; |
| } |
| |
| static void |
| snd_azf3328_free_joystick(struct snd_azf3328 *chip) |
| { |
| if (chip->gameport) { |
| struct resource *r = gameport_get_port_data(chip->gameport); |
| |
| gameport_unregister_port(chip->gameport); |
| chip->gameport = NULL; |
| /* disable gameport */ |
| snd_azf3328_io2_outb(chip, IDX_IO2_LEGACY_ADDR, |
| snd_azf3328_io2_inb(chip, IDX_IO2_LEGACY_ADDR) & ~LEGACY_JOY); |
| release_and_free_resource(r); |
| } |
| } |
| #else |
| static inline int |
| snd_azf3328_config_joystick(struct snd_azf3328 *chip, int dev) { return -ENOSYS; } |
| static inline void |
| snd_azf3328_free_joystick(struct snd_azf3328 *chip) { } |
| #endif |
| |
| /******************************************************************/ |
| |
| static int |
| snd_azf3328_free(struct snd_azf3328 *chip) |
| { |
| if (chip->irq < 0) |
| goto __end_hw; |
| |
| /* reset (close) mixer */ |
| snd_azf3328_mixer_set_mute(chip, IDX_MIXER_PLAY_MASTER, 1); /* first mute master volume */ |
| snd_azf3328_mixer_outw(chip, IDX_MIXER_RESET, 0x0000); |
| |
| /* interrupt setup - mask everything (FIXME!) */ |
| /* well, at least we know how to disable the timer IRQ */ |
| snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x00); |
| |
| synchronize_irq(chip->irq); |
| __end_hw: |
| snd_azf3328_free_joystick(chip); |
| if (chip->irq >= 0) |
| free_irq(chip->irq, (void *)chip); |
| pci_release_regions(chip->pci); |
| pci_disable_device(chip->pci); |
| |
| kfree(chip); |
| return 0; |
| } |
| |
| static int |
| snd_azf3328_dev_free(struct snd_device *device) |
| { |
| struct snd_azf3328 *chip = device->device_data; |
| return snd_azf3328_free(chip); |
| } |
| |
| /******************************************************************/ |
| |
| /*** NOTE: the physical timer resolution actually is 1024000 ticks per second, |
| *** but announcing those attributes to user-space would make programs |
| *** configure the timer to a 1 tick value, resulting in an absolutely fatal |
| *** timer IRQ storm. |
| *** Thus I chose to announce a down-scaled virtual timer to the outside and |
| *** calculate real timer countdown values internally. |
| *** (the scale factor can be set via module parameter "seqtimer_scaling"). |
| ***/ |
| |
| static int |
| snd_azf3328_timer_start(struct snd_timer *timer) |
| { |
| struct snd_azf3328 *chip; |
| unsigned long flags; |
| unsigned int delay; |
| |
| snd_azf3328_dbgcallenter(); |
| chip = snd_timer_chip(timer); |
| delay = ((timer->sticks * seqtimer_scaling) - 1) & TIMER_VALUE_MASK; |
| if (delay < 49) { |
| /* uhoh, that's not good, since user-space won't know about |
| * this timing tweak |
| * (we need to do it to avoid a lockup, though) */ |
| |
| snd_azf3328_dbgtimer("delay was too low (%d)!\n", delay); |
| delay = 49; /* minimum time is 49 ticks */ |
| } |
| snd_azf3328_dbgtimer("setting timer countdown value %d, add COUNTDOWN|IRQ\n", delay); |
| delay |= TIMER_ENABLE_COUNTDOWN | TIMER_ENABLE_IRQ; |
| spin_lock_irqsave(&chip->reg_lock, flags); |
| snd_azf3328_codec_outl(chip, IDX_IO_TIMER_VALUE, delay); |
| spin_unlock_irqrestore(&chip->reg_lock, flags); |
| snd_azf3328_dbgcallleave(); |
| return 0; |
| } |
| |
| static int |
| snd_azf3328_timer_stop(struct snd_timer *timer) |
| { |
| struct snd_azf3328 *chip; |
| unsigned long flags; |
| |
| snd_azf3328_dbgcallenter(); |
| chip = snd_timer_chip(timer); |
| spin_lock_irqsave(&chip->reg_lock, flags); |
| /* disable timer countdown and interrupt */ |
| /* FIXME: should we write TIMER_ACK_IRQ here? */ |
| snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0); |
| spin_unlock_irqrestore(&chip->reg_lock, flags); |
| snd_azf3328_dbgcallleave(); |
| return 0; |
| } |
| |
| |
| static int |
| snd_azf3328_timer_precise_resolution(struct snd_timer *timer, |
| unsigned long *num, unsigned long *den) |
| { |
| snd_azf3328_dbgcallenter(); |
| *num = 1; |
| *den = 1024000 / seqtimer_scaling; |
| snd_azf3328_dbgcallleave(); |
| return 0; |
| } |
| |
| static struct snd_timer_hardware snd_azf3328_timer_hw = { |
| .flags = SNDRV_TIMER_HW_AUTO, |
| .resolution = 977, /* 1000000/1024000 = 0.9765625us */ |
| .ticks = 1024000, /* max tick count, defined by the value register; actually it's not 1024000, but 1048576, but we don't care */ |
| .start = snd_azf3328_timer_start, |
| .stop = snd_azf3328_timer_stop, |
| .precise_resolution = snd_azf3328_timer_precise_resolution, |
| }; |
| |
| static int __devinit |
| snd_azf3328_timer(struct snd_azf3328 *chip, int device) |
| { |
| struct snd_timer *timer = NULL; |
| struct snd_timer_id tid; |
| int err; |
| |
| snd_azf3328_dbgcallenter(); |
| tid.dev_class = SNDRV_TIMER_CLASS_CARD; |
| tid.dev_sclass = SNDRV_TIMER_SCLASS_NONE; |
| tid.card = chip->card->number; |
| tid.device = device; |
| tid.subdevice = 0; |
| |
| snd_azf3328_timer_hw.resolution *= seqtimer_scaling; |
| snd_azf3328_timer_hw.ticks /= seqtimer_scaling; |
| if ((err = snd_timer_new(chip->card, "AZF3328", &tid, &timer)) < 0) { |
| goto out; |
| } |
| |
| strcpy(timer->name, "AZF3328 timer"); |
| timer->private_data = chip; |
| timer->hw = snd_azf3328_timer_hw; |
| |
| chip->timer = timer; |
| |
| err = 0; |
| |
| out: |
| snd_azf3328_dbgcallleave(); |
| return err; |
| } |
| |
| /******************************************************************/ |
| |
| #if 0 |
| /* check whether a bit can be modified */ |
| static void |
| snd_azf3328_test_bit(unsigned int reg, int bit) |
| { |
| unsigned char val, valoff, valon; |
| |
| val = inb(reg); |
| |
| outb(val & ~(1 << bit), reg); |
| valoff = inb(reg); |
| |
| outb(val|(1 << bit), reg); |
| valon = inb(reg); |
| |
| outb(val, reg); |
| |
| printk(KERN_ERR "reg %04x bit %d: %02x %02x %02x\n", reg, bit, val, valoff, valon); |
| } |
| #endif |
| |
| static void |
| snd_azf3328_debug_show_ports(const struct snd_azf3328 *chip) |
| { |
| #if DEBUG_MISC |
| u16 tmp; |
| |
| snd_azf3328_dbgmisc("codec_port 0x%lx, io2_port 0x%lx, mpu_port 0x%lx, synth_port 0x%lx, mixer_port 0x%lx, irq %d\n", chip->codec_port, chip->io2_port, chip->mpu_port, chip->synth_port, chip->mixer_port, chip->irq); |
| |
| snd_azf3328_dbgmisc("io2 %02x %02x %02x %02x %02x %02x\n", snd_azf3328_io2_inb(chip, 0), snd_azf3328_io2_inb(chip, 1), snd_azf3328_io2_inb(chip, 2), snd_azf3328_io2_inb(chip, 3), snd_azf3328_io2_inb(chip, 4), snd_azf3328_io2_inb(chip, 5)); |
| |
| for (tmp=0; tmp <= 0x01; tmp += 1) |
| snd_azf3328_dbgmisc("0x%02x: opl 0x%04x, mpu300 0x%04x, mpu310 0x%04x, mpu320 0x%04x, mpu330 0x%04x\n", tmp, inb(0x388 + tmp), inb(0x300 + tmp), inb(0x310 + tmp), inb(0x320 + tmp), inb(0x330 + tmp)); |
| |
| for (tmp = 0; tmp <= 0x6E; tmp += 2) |
| snd_azf3328_dbgmisc("0x%02x: 0x%04x\n", tmp, snd_azf3328_codec_inb(chip, tmp)); |
| #endif |
| } |
| |
| static int __devinit |
| snd_azf3328_create(struct snd_card *card, |
| struct pci_dev *pci, |
| unsigned long device_type, |
| struct snd_azf3328 ** rchip) |
| { |
| struct snd_azf3328 *chip; |
| int err; |
| static struct snd_device_ops ops = { |
| .dev_free = snd_azf3328_dev_free, |
| }; |
| u16 tmp; |
| |
| *rchip = NULL; |
| |
| if ((err = pci_enable_device(pci)) < 0) |
| return err; |
| |
| chip = kzalloc(sizeof(*chip), GFP_KERNEL); |
| if (chip == NULL) { |
| err = -ENOMEM; |
| goto out_err; |
| } |
| spin_lock_init(&chip->reg_lock); |
| chip->card = card; |
| chip->pci = pci; |
| chip->irq = -1; |
| |
| /* check if we can restrict PCI DMA transfers to 24 bits */ |
| if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 || |
| pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) { |
| snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n"); |
| err = -ENXIO; |
| goto out_err; |
| } |
| |
| if ((err = pci_request_regions(pci, "Aztech AZF3328")) < 0) { |
| goto out_err; |
| } |
| |
| chip->codec_port = pci_resource_start(pci, 0); |
| chip->io2_port = pci_resource_start(pci, 1); |
| chip->mpu_port = pci_resource_start(pci, 2); |
| chip->synth_port = pci_resource_start(pci, 3); |
| chip->mixer_port = pci_resource_start(pci, 4); |
| |
| if (request_irq(pci->irq, snd_azf3328_interrupt, SA_INTERRUPT|SA_SHIRQ, card->shortname, (void *)chip)) { |
| snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq); |
| err = -EBUSY; |
| goto out_err; |
| } |
| chip->irq = pci->irq; |
| pci_set_master(pci); |
| synchronize_irq(chip->irq); |
| |
| snd_azf3328_debug_show_ports(chip); |
| |
| if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) { |
| goto out_err; |
| } |
| |
| /* create mixer interface & switches */ |
| if ((err = snd_azf3328_mixer_new(chip)) < 0) |
| goto out_err; |
| |
| #if 0 |
| /* set very low bitrate to reduce noise and power consumption? */ |
| snd_azf3328_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT, 5512, 8, 1); |
| #endif |
| |
| /* standard chip init stuff */ |
| /* default IRQ init value */ |
| tmp = DMA_PLAY_SOMETHING2|DMA_EPILOGUE_SOMETHING|DMA_SOMETHING_ELSE; |
| |
| spin_lock_irq(&chip->reg_lock); |
| snd_azf3328_codec_outb(chip, IDX_IO_PLAY_FLAGS, tmp); |
| snd_azf3328_codec_outb(chip, IDX_IO_REC_FLAGS, tmp); |
| snd_azf3328_codec_outb(chip, IDX_IO_SOMETHING_FLAGS, tmp); |
| snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x00); /* disable timer */ |
| spin_unlock_irq(&chip->reg_lock); |
| |
| snd_card_set_dev(card, &pci->dev); |
| |
| *rchip = chip; |
| |
| err = 0; |
| goto out; |
| |
| out_err: |
| if (chip) |
| snd_azf3328_free(chip); |
| pci_disable_device(pci); |
| |
| out: |
| return err; |
| } |
| |
| static int __devinit |
| snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) |
| { |
| static int dev; |
| struct snd_card *card; |
| struct snd_azf3328 *chip; |
| struct snd_opl3 *opl3; |
| int err; |
| |
| snd_azf3328_dbgcallenter(); |
| if (dev >= SNDRV_CARDS) |
| return -ENODEV; |
| if (!enable[dev]) { |
| dev++; |
| return -ENOENT; |
| } |
| |
| card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0 ); |
| if (card == NULL) |
| return -ENOMEM; |
| |
| strcpy(card->driver, "AZF3328"); |
| strcpy(card->shortname, "Aztech AZF3328 (PCI168)"); |
| |
| if ((err = snd_azf3328_create(card, pci, pci_id->driver_data, &chip)) < 0) { |
| goto out_err; |
| } |
| |
| card->private_data = chip; |
| |
| if ((err = snd_mpu401_uart_new( card, 0, MPU401_HW_MPU401, |
| chip->mpu_port, 1, pci->irq, 0, |
| &chip->rmidi)) < 0) { |
| snd_printk(KERN_ERR "azf3328: no MPU-401 device at 0x%lx?\n", chip->mpu_port); |
| goto out_err; |
| } |
| |
| if ((err = snd_azf3328_timer(chip, 0)) < 0) { |
| goto out_err; |
| } |
| |
| if ((err = snd_azf3328_pcm(chip, 0)) < 0) { |
| goto out_err; |
| } |
| |
| if (snd_opl3_create(card, chip->synth_port, chip->synth_port+2, |
| OPL3_HW_AUTO, 1, &opl3) < 0) { |
| snd_printk(KERN_ERR "azf3328: no OPL3 device at 0x%lx-0x%lx?\n", |
| chip->synth_port, chip->synth_port+2 ); |
| } else { |
| if ((err = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0) { |
| goto out_err; |
| } |
| } |
| |
| opl3->private_data = chip; |
| |
| sprintf(card->longname, "%s at 0x%lx, irq %i", |
| card->shortname, chip->codec_port, chip->irq); |
| |
| if ((err = snd_card_register(card)) < 0) { |
| goto out_err; |
| } |
| |
| #ifdef MODULE |
| printk( |
| "azt3328: Sound driver for Aztech AZF3328-based soundcards such as PCI168\n" |
| "azt3328: (hardware was completely undocumented - ZERO support from Aztech).\n" |
| "azt3328: Feel free to contact andi AT lisas.de for bug reports etc.!\n" |
| "azt3328: User-scalable sequencer timer set to %dHz (1024000Hz / %d).\n", |
| 1024000 / seqtimer_scaling, seqtimer_scaling); |
| #endif |
| |
| if (snd_azf3328_config_joystick(chip, dev) < 0) |
| snd_azf3328_io2_outb(chip, IDX_IO2_LEGACY_ADDR, |
| snd_azf3328_io2_inb(chip, IDX_IO2_LEGACY_ADDR) & ~LEGACY_JOY); |
| |
| pci_set_drvdata(pci, card); |
| dev++; |
| |
| err = 0; |
| goto out; |
| |
| out_err: |
| snd_card_free(card); |
| |
| out: |
| snd_azf3328_dbgcallleave(); |
| return err; |
| } |
| |
| static void __devexit |
| snd_azf3328_remove(struct pci_dev *pci) |
| { |
| snd_azf3328_dbgcallenter(); |
| snd_card_free(pci_get_drvdata(pci)); |
| pci_set_drvdata(pci, NULL); |
| snd_azf3328_dbgcallleave(); |
| } |
| |
| #ifdef CONFIG_PM |
| static int |
| snd_azf3328_suspend(struct pci_dev *pci, pm_message_t state) |
| { |
| struct snd_card *card = pci_get_drvdata(pci); |
| struct snd_azf3328 *chip = card->private_data; |
| int reg; |
| |
| snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); |
| |
| snd_pcm_suspend_all(chip->pcm); |
| |
| for (reg = 0; reg < AZF_IO_SIZE_MIXER_PM / 2; reg++) |
| chip->saved_regs_mixer[reg] = inw(chip->mixer_port + reg * 2); |
| |
| /* make sure to disable master volume etc. to prevent looping sound */ |
| snd_azf3328_mixer_set_mute(chip, IDX_MIXER_PLAY_MASTER, 1); |
| snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1); |
| |
| for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; reg++) |
| chip->saved_regs_codec[reg] = inw(chip->codec_port + reg * 2); |
| for (reg = 0; reg < AZF_IO_SIZE_IO2_PM / 2; reg++) |
| chip->saved_regs_io2[reg] = inw(chip->io2_port + reg * 2); |
| for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; reg++) |
| chip->saved_regs_mpu[reg] = inw(chip->mpu_port + reg * 2); |
| for (reg = 0; reg < AZF_IO_SIZE_SYNTH_PM / 2; reg++) |
| chip->saved_regs_synth[reg] = inw(chip->synth_port + reg * 2); |
| |
| pci_set_power_state(pci, PCI_D3hot); |
| pci_disable_device(pci); |
| pci_save_state(pci); |
| return 0; |
| } |
| |
| static int |
| snd_azf3328_resume(struct pci_dev *pci) |
| { |
| struct snd_card *card = pci_get_drvdata(pci); |
| struct snd_azf3328 *chip = card->private_data; |
| int reg; |
| |
| pci_restore_state(pci); |
| pci_enable_device(pci); |
| pci_set_power_state(pci, PCI_D0); |
| pci_set_master(pci); |
| |
| for (reg = 0; reg < AZF_IO_SIZE_IO2_PM / 2; reg++) |
| outw(chip->saved_regs_io2[reg], chip->io2_port + reg * 2); |
| for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; reg++) |
| outw(chip->saved_regs_mpu[reg], chip->mpu_port + reg * 2); |
| for (reg = 0; reg < AZF_IO_SIZE_SYNTH_PM / 2; reg++) |
| outw(chip->saved_regs_synth[reg], chip->synth_port + reg * 2); |
| for (reg = 0; reg < AZF_IO_SIZE_MIXER_PM / 2; reg++) |
| outw(chip->saved_regs_mixer[reg], chip->mixer_port + reg * 2); |
| for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; reg++) |
| outw(chip->saved_regs_codec[reg], chip->codec_port + reg * 2); |
| |
| snd_power_change_state(card, SNDRV_CTL_POWER_D0); |
| return 0; |
| } |
| #endif |
| |
| |
| |
| |
| static struct pci_driver driver = { |
| .name = "AZF3328", |
| .id_table = snd_azf3328_ids, |
| .probe = snd_azf3328_probe, |
| .remove = __devexit_p(snd_azf3328_remove), |
| #ifdef CONFIG_PM |
| .suspend = snd_azf3328_suspend, |
| .resume = snd_azf3328_resume, |
| #endif |
| }; |
| |
| static int __init |
| alsa_card_azf3328_init(void) |
| { |
| int err; |
| snd_azf3328_dbgcallenter(); |
| err = pci_register_driver(&driver); |
| snd_azf3328_dbgcallleave(); |
| return err; |
| } |
| |
| static void __exit |
| alsa_card_azf3328_exit(void) |
| { |
| snd_azf3328_dbgcallenter(); |
| pci_unregister_driver(&driver); |
| snd_azf3328_dbgcallleave(); |
| } |
| |
| module_init(alsa_card_azf3328_init) |
| module_exit(alsa_card_azf3328_exit) |