Merge tag 'please-pull-misc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull misc Itanium fixes from Tony Luck.
* tag 'please-pull-misc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
debug: Do not permit CONFIG_DEBUG_STACK_USAGE=y on IA64 or PARISC
[IA64] Port OOM changes to ia64_do_page_fault
diff --git a/.mailmap b/.mailmap
index 2909c33..658003a 100644
--- a/.mailmap
+++ b/.mailmap
@@ -111,6 +111,7 @@
Uwe Kleine-König <ukl@pengutronix.de>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
+Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com>
Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Yusuke Goda <goda.yusuke@renesas.com>
Gustavo Padovan <gustavo@las.ic.unicamp.br>
diff --git a/Documentation/ABI/testing/sysfs-block-rssd b/Documentation/ABI/testing/sysfs-block-rssd
index 679ce35..beef30c 100644
--- a/Documentation/ABI/testing/sysfs-block-rssd
+++ b/Documentation/ABI/testing/sysfs-block-rssd
@@ -1,26 +1,5 @@
-What: /sys/block/rssd*/registers
-Date: March 2012
-KernelVersion: 3.3
-Contact: Asai Thambi S P <asamymuthupa@micron.com>
-Description: This is a read-only file. Dumps below driver information and
- hardware registers.
- - S ACTive
- - Command Issue
- - Completed
- - PORT IRQ STAT
- - HOST IRQ STAT
- - Allocated
- - Commands in Q
-
What: /sys/block/rssd*/status
Date: April 2012
KernelVersion: 3.4
Contact: Asai Thambi S P <asamymuthupa@micron.com>
Description: This is a read-only file. Indicates the status of the device.
-
-What: /sys/block/rssd*/flags
-Date: May 2012
-KernelVersion: 3.5
-Contact: Asai Thambi S P <asamymuthupa@micron.com>
-Description: This is a read-only file. Dumps the flags in port and driver
- data structure
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 5bc8a47..cfedf63 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -219,6 +219,7 @@
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
@@ -273,6 +274,7 @@
What: /sys/.../iio:deviceX/in_voltageX_scale_available
What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available
What: /sys/.../iio:deviceX/out_voltageX_scale_available
+What: /sys/.../iio:deviceX/out_altvoltageX_scale_available
What: /sys/.../iio:deviceX/in_capacitance_scale_available
KernelVersion: 2.635
Contact: linux-iio@vger.kernel.org
@@ -298,14 +300,19 @@
gives the 3dB frequency of the filter in Hz.
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
Raw (unscaled, no bias etc.) output voltage for
channel Y. The number must always be specified and
unique if the output corresponds to a single channel.
+ While DAC like devices typically use out_voltage,
+ a continuous frequency generating device, such as
+ a DDS or PLL should use out_altvoltage.
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
@@ -316,6 +323,8 @@
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
@@ -330,6 +339,8 @@
What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
@@ -338,6 +349,8 @@
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
@@ -346,6 +359,24 @@
normal operation. Y may be suppressed if all outputs are
controlled together.
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
+KernelVersion: 3.4.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Output frequency for channel Y in Hz. The number must always be
+ specified and unique if the output corresponds to a single
+ channel.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
+KernelVersion: 3.4.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Phase in radians of one frequency/clock output Y
+ (out_altvoltageY) relative to another frequency/clock output
+ (out_altvoltageZ) of the device X. The number must always be
+ specified and unique if the output corresponds to a single
+ channel.
+
What: /sys/bus/iio/devices/iio:deviceX/events
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd
index db1ad7e..938ef71 100644
--- a/Documentation/ABI/testing/sysfs-class-mtd
+++ b/Documentation/ABI/testing/sysfs-class-mtd
@@ -142,13 +142,14 @@
Contact: linux-mtd@lists.infradead.org
Description:
This allows the user to examine and adjust the criteria by which
- mtd returns -EUCLEAN from mtd_read(). If the maximum number of
- bit errors that were corrected on any single region comprising
- an ecc step (as reported by the driver) equals or exceeds this
- value, -EUCLEAN is returned. Otherwise, absent an error, 0 is
- returned. Higher layers (e.g., UBI) use this return code as an
- indication that an erase block may be degrading and should be
- scrutinized as a candidate for being marked as bad.
+ mtd returns -EUCLEAN from mtd_read() and mtd_read_oob(). If the
+ maximum number of bit errors that were corrected on any single
+ region comprising an ecc step (as reported by the driver) equals
+ or exceeds this value, -EUCLEAN is returned. Otherwise, absent
+ an error, 0 is returned. Higher layers (e.g., UBI) use this
+ return code as an indication that an erase block may be
+ degrading and should be scrutinized as a candidate for being
+ marked as bad.
The initial value may be specified by the flash device driver.
If not, then the default value is ecc_strength.
@@ -167,7 +168,7 @@
block degradation, but high enough to avoid the consequences of
a persistent return value of -EUCLEAN on devices where sticky
bitflips occur. Note that if bitflip_threshold exceeds
- ecc_strength, -EUCLEAN is never returned by mtd_read().
+ ecc_strength, -EUCLEAN is never returned by the read operations.
Conversely, if bitflip_threshold is zero, -EUCLEAN is always
returned, absent a hard error.
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
index 31725ff..2177726 100644
--- a/Documentation/ABI/testing/sysfs-power
+++ b/Documentation/ABI/testing/sysfs-power
@@ -231,3 +231,16 @@
Reads from this file return a string consisting of the names of
wakeup sources created with the help of /sys/power/wake_lock
that are inactive at the moment, separated with spaces.
+
+What: /sys/power/pm_print_times
+Date: May 2012
+Contact: Sameer Nanda <snanda@chromium.org>
+Description:
+ The /sys/power/pm_print_times file allows user space to
+ control whether the time taken by devices to suspend and
+ resume is printed. These prints are useful for hunting down
+ devices that take too long to suspend or resume.
+
+ Writing a "1" enables this printing while writing a "0"
+ disables it. The default value is "0". Reading from this file
+ will display the current value.
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 676bc46..cda0dfb 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3988,7 +3988,7 @@
from RGB to Y'CbCr color space.
</entry>
</row>
- <row id = "v4l2-jpeg-chroma-subsampling">
+ <row>
<entrytbl spanname="descr" cols="2">
<tbody valign="top">
<row>
diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml
index f5ac15e..e58934c 100644
--- a/Documentation/DocBook/media/v4l/pixfmt.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt.xml
@@ -986,13 +986,13 @@
<row id="V4L2-PIX-FMT-Y4">
<entry><constant>V4L2_PIX_FMT_Y4</constant></entry>
<entry>'Y04 '</entry>
- <entry>Old 4-bit greyscale format. Only the least significant 4 bits of each byte are used,
+ <entry>Old 4-bit greyscale format. Only the most significant 4 bits of each byte are used,
the other bits are set to 0.</entry>
</row>
<row id="V4L2-PIX-FMT-Y6">
<entry><constant>V4L2_PIX_FMT_Y6</constant></entry>
<entry>'Y06 '</entry>
- <entry>Old 6-bit greyscale format. Only the least significant 6 bits of each byte are used,
+ <entry>Old 6-bit greyscale format. Only the most significant 6 bits of each byte are used,
the other bits are set to 0.</entry>
</row>
</tbody>
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml
index 015c561..008c2d7 100644
--- a/Documentation/DocBook/media/v4l/v4l2.xml
+++ b/Documentation/DocBook/media/v4l/v4l2.xml
@@ -560,6 +560,7 @@
&sub-g-tuner;
&sub-log-status;
&sub-overlay;
+ &sub-prepare-buf;
&sub-qbuf;
&sub-querybuf;
&sub-querycap;
@@ -567,7 +568,6 @@
&sub-query-dv-preset;
&sub-query-dv-timings;
&sub-querystd;
- &sub-prepare-buf;
&sub-reqbufs;
&sub-s-hw-freq-seek;
&sub-streamon;
diff --git a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
index 765549f..a2474ec 100644
--- a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
@@ -108,10 +108,9 @@
/></entry>
</row>
<row>
- <entry>__u32</entry>
+ <entry>struct v4l2_format</entry>
<entry><structfield>format</structfield></entry>
- <entry>Filled in by the application, preserved by the driver.
- See <xref linkend="v4l2-format" />.</entry>
+ <entry>Filled in by the application, preserved by the driver.</entry>
</row>
<row>
<entry>__u32</entry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml
index e8714aa..98a856f 100644
--- a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml
@@ -89,7 +89,7 @@
<row>
<entry></entry>
<entry>&v4l2-event-frame-sync;</entry>
- <entry><structfield>frame</structfield></entry>
+ <entry><structfield>frame_sync</structfield></entry>
<entry>Event data for event V4L2_EVENT_FRAME_SYNC.</entry>
</row>
<row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
index e3d5afcd..0a4b90f 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
@@ -284,13 +284,6 @@
processing controls. These controls are described in <xref
linkend="image-process-controls" />.</entry>
</row>
- <row>
- <entry><constant>V4L2_CTRL_CLASS_JPEG</constant></entry>
- <entry>0x9d0000</entry>
- <entry>The class containing JPEG compression controls.
-These controls are described in <xref
- linkend="jpeg-controls" />.</entry>
- </row>
</tbody>
</tgroup>
</table>
diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt
index 5c8d749..fc103d7 100644
--- a/Documentation/RCU/checklist.txt
+++ b/Documentation/RCU/checklist.txt
@@ -162,9 +162,9 @@
when publicizing a pointer to a structure that can
be traversed by an RCU read-side critical section.
-5. If call_rcu(), or a related primitive such as call_rcu_bh() or
- call_rcu_sched(), is used, the callback function must be
- written to be called from softirq context. In particular,
+5. If call_rcu(), or a related primitive such as call_rcu_bh(),
+ call_rcu_sched(), or call_srcu() is used, the callback function
+ must be written to be called from softirq context. In particular,
it cannot block.
6. Since synchronize_rcu() can block, it cannot be called from
@@ -202,11 +202,12 @@
updater uses call_rcu_sched() or synchronize_sched(), then
the corresponding readers must disable preemption, possibly
by calling rcu_read_lock_sched() and rcu_read_unlock_sched().
- If the updater uses synchronize_srcu(), the the corresponding
- readers must use srcu_read_lock() and srcu_read_unlock(),
- and with the same srcu_struct. The rules for the expedited
- primitives are the same as for their non-expedited counterparts.
- Mixing things up will result in confusion and broken kernels.
+ If the updater uses synchronize_srcu() or call_srcu(),
+ the the corresponding readers must use srcu_read_lock() and
+ srcu_read_unlock(), and with the same srcu_struct. The rules for
+ the expedited primitives are the same as for their non-expedited
+ counterparts. Mixing things up will result in confusion and
+ broken kernels.
One exception to this rule: rcu_read_lock() and rcu_read_unlock()
may be substituted for rcu_read_lock_bh() and rcu_read_unlock_bh()
@@ -333,14 +334,14 @@
victim CPU from ever going offline.)
14. SRCU (srcu_read_lock(), srcu_read_unlock(), srcu_dereference(),
- synchronize_srcu(), and synchronize_srcu_expedited()) may only
- be invoked from process context. Unlike other forms of RCU, it
- -is- permissible to block in an SRCU read-side critical section
- (demarked by srcu_read_lock() and srcu_read_unlock()), hence the
- "SRCU": "sleepable RCU". Please note that if you don't need
- to sleep in read-side critical sections, you should be using
- RCU rather than SRCU, because RCU is almost always faster and
- easier to use than is SRCU.
+ synchronize_srcu(), synchronize_srcu_expedited(), and call_srcu())
+ may only be invoked from process context. Unlike other forms of
+ RCU, it -is- permissible to block in an SRCU read-side critical
+ section (demarked by srcu_read_lock() and srcu_read_unlock()),
+ hence the "SRCU": "sleepable RCU". Please note that if you
+ don't need to sleep in read-side critical sections, you should be
+ using RCU rather than SRCU, because RCU is almost always faster
+ and easier to use than is SRCU.
If you need to enter your read-side critical section in a
hardirq or exception handler, and then exit that same read-side
@@ -353,8 +354,8 @@
cleanup_srcu_struct(). These are passed a "struct srcu_struct"
that defines the scope of a given SRCU domain. Once initialized,
the srcu_struct is passed to srcu_read_lock(), srcu_read_unlock()
- synchronize_srcu(), and synchronize_srcu_expedited(). A given
- synchronize_srcu() waits only for SRCU read-side critical
+ synchronize_srcu(), synchronize_srcu_expedited(), and call_srcu().
+ A given synchronize_srcu() waits only for SRCU read-side critical
sections governed by srcu_read_lock() and srcu_read_unlock()
calls that have been passed the same srcu_struct. This property
is what makes sleeping read-side critical sections tolerable --
@@ -374,7 +375,7 @@
requiring SRCU's read-side deadlock immunity or low read-side
realtime latency.
- Note that, rcu_assign_pointer() relates to SRCU just as they do
+ Note that, rcu_assign_pointer() relates to SRCU just as it does
to other forms of RCU.
15. The whole point of call_rcu(), synchronize_rcu(), and friends
diff --git a/Documentation/RCU/rcubarrier.txt b/Documentation/RCU/rcubarrier.txt
index e439a0e..38428c1 100644
--- a/Documentation/RCU/rcubarrier.txt
+++ b/Documentation/RCU/rcubarrier.txt
@@ -79,8 +79,6 @@
2. Execute rcu_barrier().
3. Allow the module to be unloaded.
-Quick Quiz #1: Why is there no srcu_barrier()?
-
The rcutorture module makes use of rcu_barrier in its exit function
as follows:
@@ -162,7 +160,7 @@
Then lines 55-62 print status and do operation-specific cleanup, and
then return, permitting the module-unload operation to be completed.
-Quick Quiz #2: Is there any other situation where rcu_barrier() might
+Quick Quiz #1: Is there any other situation where rcu_barrier() might
be required?
Your module might have additional complications. For example, if your
@@ -242,7 +240,7 @@
4 complete(&rcu_barrier_completion);
5 }
-Quick Quiz #3: What happens if CPU 0's rcu_barrier_func() executes
+Quick Quiz #2: What happens if CPU 0's rcu_barrier_func() executes
immediately (thus incrementing rcu_barrier_cpu_count to the
value one), but the other CPU's rcu_barrier_func() invocations
are delayed for a full grace period? Couldn't this result in
@@ -259,12 +257,7 @@
Answers to Quick Quizzes
-Quick Quiz #1: Why is there no srcu_barrier()?
-
-Answer: Since there is no call_srcu(), there can be no outstanding SRCU
- callbacks. Therefore, there is no need to wait for them.
-
-Quick Quiz #2: Is there any other situation where rcu_barrier() might
+Quick Quiz #1: Is there any other situation where rcu_barrier() might
be required?
Answer: Interestingly enough, rcu_barrier() was not originally
@@ -278,7 +271,7 @@
implementing rcutorture, and found that rcu_barrier() solves
this problem as well.
-Quick Quiz #3: What happens if CPU 0's rcu_barrier_func() executes
+Quick Quiz #2: What happens if CPU 0's rcu_barrier_func() executes
immediately (thus incrementing rcu_barrier_cpu_count to the
value one), but the other CPU's rcu_barrier_func() invocations
are delayed for a full grace period? Couldn't this result in
diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt
index 4ddf391..7dce8a1 100644
--- a/Documentation/RCU/torture.txt
+++ b/Documentation/RCU/torture.txt
@@ -174,11 +174,20 @@
and synchronize_rcu_bh_expedited().
"srcu": srcu_read_lock(), srcu_read_unlock() and
+ call_srcu().
+
+ "srcu_sync": srcu_read_lock(), srcu_read_unlock() and
synchronize_srcu().
"srcu_expedited": srcu_read_lock(), srcu_read_unlock() and
synchronize_srcu_expedited().
+ "srcu_raw": srcu_read_lock_raw(), srcu_read_unlock_raw(),
+ and call_srcu().
+
+ "srcu_raw_sync": srcu_read_lock_raw(), srcu_read_unlock_raw(),
+ and synchronize_srcu().
+
"sched": preempt_disable(), preempt_enable(), and
call_rcu_sched().
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index 6bbe8dc..69ee188 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -833,9 +833,9 @@
SRCU: Critical sections Grace period Barrier
- srcu_read_lock synchronize_srcu N/A
- srcu_read_unlock synchronize_srcu_expedited
- srcu_read_lock_raw
+ srcu_read_lock synchronize_srcu srcu_barrier
+ srcu_read_unlock call_srcu
+ srcu_read_lock_raw synchronize_srcu_expedited
srcu_read_unlock_raw
srcu_dereference
diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt
index 57aae77..65610bf 100644
--- a/Documentation/arm/SPEAr/overview.txt
+++ b/Documentation/arm/SPEAr/overview.txt
@@ -60,4 +60,4 @@
Document Author
---------------
- Viresh Kumar <viresh.kumar@st.com>, (c) 2010-2012 ST Microelectronics
+ Viresh Kumar <viresh.linux@gmail.com>, (c) 2010-2012 ST Microelectronics
diff --git a/Documentation/device-mapper/verity.txt b/Documentation/device-mapper/verity.txt
index 32e4879..9884681 100644
--- a/Documentation/device-mapper/verity.txt
+++ b/Documentation/device-mapper/verity.txt
@@ -7,39 +7,39 @@
Construction Parameters
=======================
- <version> <dev> <hash_dev> <hash_start>
+ <version> <dev> <hash_dev>
<data_block_size> <hash_block_size>
<num_data_blocks> <hash_start_block>
<algorithm> <digest> <salt>
<version>
- This is the version number of the on-disk format.
+ This is the type of the on-disk hash format.
0 is the original format used in the Chromium OS.
- The salt is appended when hashing, digests are stored continuously and
- the rest of the block is padded with zeros.
+ The salt is appended when hashing, digests are stored continuously and
+ the rest of the block is padded with zeros.
1 is the current format that should be used for new devices.
- The salt is prepended when hashing and each digest is
- padded with zeros to the power of two.
+ The salt is prepended when hashing and each digest is
+ padded with zeros to the power of two.
<dev>
- This is the device containing the data the integrity of which needs to be
+ This is the device containing data, the integrity of which needs to be
checked. It may be specified as a path, like /dev/sdaX, or a device number,
<major>:<minor>.
<hash_dev>
- This is the device that that supplies the hash tree data. It may be
+ This is the device that supplies the hash tree data. It may be
specified similarly to the device path and may be the same device. If the
- same device is used, the hash_start should be outside of the dm-verity
- configured device size.
+ same device is used, the hash_start should be outside the configured
+ dm-verity device.
<data_block_size>
- The block size on a data device. Each block corresponds to one digest on
- the hash device.
+ The block size on a data device in bytes.
+ Each block corresponds to one digest on the hash device.
<hash_block_size>
- The size of a hash block.
+ The size of a hash block in bytes.
<num_data_blocks>
The number of data blocks on the data device. Additional blocks are
@@ -65,7 +65,7 @@
Theory of operation
===================
-dm-verity is meant to be setup as part of a verified boot path. This
+dm-verity is meant to be set up as part of a verified boot path. This
may be anything ranging from a boot using tboot or trustedgrub to just
booting from a known-good device (like a USB drive or CD).
@@ -73,20 +73,20 @@
has been authenticated in some way (cryptographic signatures, etc).
After instantiation, all hashes will be verified on-demand during
disk access. If they cannot be verified up to the root node of the
-tree, the root hash, then the I/O will fail. This should identify
+tree, the root hash, then the I/O will fail. This should detect
tampering with any data on the device and the hash data.
Cryptographic hashes are used to assert the integrity of the device on a
-per-block basis. This allows for a lightweight hash computation on first read
-into the page cache. Block hashes are stored linearly-aligned to the nearest
-block the size of a page.
+per-block basis. This allows for a lightweight hash computation on first read
+into the page cache. Block hashes are stored linearly, aligned to the nearest
+block size.
Hash Tree
---------
Each node in the tree is a cryptographic hash. If it is a leaf node, the hash
-is of some block data on disk. If it is an intermediary node, then the hash is
-of a number of child nodes.
+of some data block on disk is calculated. If it is an intermediary node,
+the hash of a number of child nodes is calculated.
Each entry in the tree is a collection of neighboring nodes that fit in one
block. The number is determined based on block_size and the size of the
@@ -110,63 +110,23 @@
On-disk format
==============
-Below is the recommended on-disk format. The verity kernel code does not
-read the on-disk header. It only reads the hash blocks which directly
-follow the header. It is expected that a user-space tool will verify the
-integrity of the verity_header and then call dmsetup with the correct
-parameters. Alternatively, the header can be omitted and the dmsetup
-parameters can be passed via the kernel command-line in a rooted chain
-of trust where the command-line is verified.
+The verity kernel code does not read the verity metadata on-disk header.
+It only reads the hash blocks which directly follow the header.
+It is expected that a user-space tool will verify the integrity of the
+verity header.
-The on-disk format is especially useful in cases where the hash blocks
-are on a separate partition. The magic number allows easy identification
-of the partition contents. Alternatively, the hash blocks can be stored
-in the same partition as the data to be verified. In such a configuration
-the filesystem on the partition would be sized a little smaller than
-the full-partition, leaving room for the hash blocks.
-
-struct superblock {
- uint8_t signature[8]
- "verity\0\0";
-
- uint8_t version;
- 1 - current format
-
- uint8_t data_block_bits;
- log2(data block size)
-
- uint8_t hash_block_bits;
- log2(hash block size)
-
- uint8_t pad1[1];
- zero padding
-
- uint16_t salt_size;
- big-endian salt size
-
- uint8_t pad2[2];
- zero padding
-
- uint32_t data_blocks_hi;
- big-endian high 32 bits of the 64-bit number of data blocks
-
- uint32_t data_blocks_lo;
- big-endian low 32 bits of the 64-bit number of data blocks
-
- uint8_t algorithm[16];
- cryptographic algorithm
-
- uint8_t salt[384];
- salt (the salt size is specified above)
-
- uint8_t pad3[88];
- zero padding to 512-byte boundary
-}
+Alternatively, the header can be omitted and the dmsetup parameters can
+be passed via the kernel command-line in a rooted chain of trust where
+the command-line is verified.
Directly following the header (and with sector number padded to the next hash
block boundary) are the hash blocks which are stored a depth at a time
(starting from the root), sorted in order of increasing index.
+The full specification of kernel parameters and on-disk metadata format
+is available at the cryptsetup project's wiki page
+ http://code.google.com/p/cryptsetup/wiki/DMVerity
+
Status
======
V (for Valid) is returned if every check performed so far was valid.
@@ -174,21 +134,22 @@
Example
=======
-
-Setup a device:
- dmsetup create vroot --table \
- "0 2097152 "\
- "verity 1 /dev/sda1 /dev/sda2 4096 4096 2097152 1 "\
+Set up a device:
+ # dmsetup create vroot --readonly --table \
+ "0 2097152 verity 1 /dev/sda1 /dev/sda2 4096 4096 262144 1 sha256 "\
"4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 "\
"1234000000000000000000000000000000000000000000000000000000000000"
A command line tool veritysetup is available to compute or verify
-the hash tree or activate the kernel driver. This is available from
-the LVM2 upstream repository and may be supplied as a package called
-device-mapper-verity-tools:
- git://sources.redhat.com/git/lvm2
- http://sourceware.org/git/?p=lvm2.git
- http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/verity?cvsroot=lvm2
+the hash tree or activate the kernel device. This is available from
+the cryptsetup upstream repository http://code.google.com/p/cryptsetup/
+(as a libcryptsetup extension).
-veritysetup -a vroot /dev/sda1 /dev/sda2 \
- 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
+Create hash on the device:
+ # veritysetup format /dev/sda1 /dev/sda2
+ ...
+ Root hash: 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
+
+Activate the device:
+ # veritysetup create vroot /dev/sda1 /dev/sda2 \
+ 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt b/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt
new file mode 100644
index 0000000..70c0dc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt
@@ -0,0 +1,23 @@
+Marvell Armada 370 and Armada XP Interrupt Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible: Should be "marvell,mpic"
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: The number of cells to define the interrupts. Should be 1.
+ The cell is the IRQ number
+- reg: Should contain PMIC registers location and length. First pair
+ for the main interrupt registers, second pair for the per-CPU
+ interrupt registers
+
+Example:
+
+ mpic: interrupt-controller@d0020000 {
+ compatible = "marvell,mpic";
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ reg = <0xd0020000 0x1000>,
+ <0xd0021000 0x1000>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt b/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt
new file mode 100644
index 0000000..8b6ea22
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt
@@ -0,0 +1,11 @@
+Marvell Armada 370 and Armada XP Global Timers
+----------------------------------------------
+
+Required properties:
+- compatible: Should be "marvell,armada-370-xp-timer"
+- interrupts: Should contain the list of Global Timer interrupts
+- reg: Should contain the base address of the Global Timer registers
+
+Optional properties:
+- marvell,timer-25Mhz: Tells whether the Global timer supports the 25
+ Mhz fixed mode (available on Armada XP and not on Armada 370)
diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp.txt b/Documentation/devicetree/bindings/arm/armada-370-xp.txt
new file mode 100644
index 0000000..c6ed90e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armada-370-xp.txt
@@ -0,0 +1,24 @@
+Marvell Armada 370 and Armada XP Platforms Device Tree Bindings
+---------------------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 370 and Armada XP families
+shall have the following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armada-370-xp"
+
+In addition, boards using the Marvell Armada 370 SoC shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armada370"
+
+In addition, boards using the Marvell Armada XP SoC shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armadaxp"
+
diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/arm/atmel-aic.txt
index aabca4f..19078bf 100644
--- a/Documentation/devicetree/bindings/arm/atmel-aic.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-aic.txt
@@ -4,7 +4,7 @@
- compatible: Should be "atmel,<chip>-aic"
- interrupt-controller: Identifies the node as an interrupt controller.
- interrupt-parent: For single AIC system, it is an empty property.
-- #interrupt-cells: The number of cells to define the interrupts. It sould be 2.
+- #interrupt-cells: The number of cells to define the interrupts. It sould be 3.
The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
The second cell is used to specify flags:
bits[3:0] trigger type and level flags:
@@ -14,7 +14,10 @@
8 = active low level-sensitive.
Valid combinations are 1, 2, 3, 4, 8.
Default flag for internal sources should be set to 4 (active high).
+ The third cell is used to specify the irq priority from 0 (lowest) to 7
+ (highest).
- reg: Should contain AIC registers location and length
+- atmel,external-irqs: u32 array of external irqs.
Examples:
/*
@@ -24,7 +27,7 @@
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
interrupt-parent;
- #interrupt-cells = <2>;
+ #interrupt-cells = <3>;
reg = <0xfffff000 0x200>;
};
@@ -34,5 +37,5 @@
dma: dma-controller@ffffec00 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
- interrupts = <21 4>;
+ interrupts = <21 4 5>;
};
diff --git a/Documentation/devicetree/bindings/arm/davinci/cp-intc.txt b/Documentation/devicetree/bindings/arm/davinci/cp-intc.txt
new file mode 100644
index 0000000..597e8a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/davinci/cp-intc.txt
@@ -0,0 +1,27 @@
+* TI Common Platform Interrupt Controller
+
+Common Platform Interrupt Controller (cp_intc) is used on
+OMAP-L1x SoCs and can support several configurable number
+of interrupts.
+
+Main node required properties:
+
+- compatible : should be:
+ "ti,cp-intc"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The type shall be a <u32> and the value shall be 1.
+
+ The cell contains the interrupt number in the range [0-128].
+- ti,intc-size: Number of interrupts handled by the interrupt controller.
+- reg: physical base address and size of the intc registers map.
+
+Example:
+
+ intc: interrupt-controller@1 {
+ compatible = "ti,cp-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ ti,intc-size = <101>;
+ reg = <0xfffee000 0x2000>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/mvebu-system-controller.txt b/Documentation/devicetree/bindings/arm/mvebu-system-controller.txt
new file mode 100644
index 0000000..081c6a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mvebu-system-controller.txt
@@ -0,0 +1,17 @@
+MVEBU System Controller
+-----------------------
+MVEBU (Marvell SOCs: Armada 370/XP, Dove, mv78xx0, Kirkwood, Orion5x)
+
+Required properties:
+
+- compatible: one of:
+ - "marvell,orion-system-controller"
+ - "marvell,armada-370-xp-system-controller"
+- reg: Should contain system controller registers location and length.
+
+Example:
+
+ system-controller@d0018200 {
+ compatible = "marvell,armada-370-xp-system-controller";
+ reg = <0xd0018200 0x500>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/olimex.txt b/Documentation/devicetree/bindings/arm/olimex.txt
new file mode 100644
index 0000000..007fb5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/olimex.txt
@@ -0,0 +1,6 @@
+Olimex i.MX Platforms Device Tree Bindings
+------------------------------------------
+
+i.MX23 Olinuxino Low Cost Board
+Required root node properties:
+ - compatible = "olimex,imx23-olinuxino", "fsl,imx23";
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index e78e8bc..ccdd0e5 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -47,3 +47,9 @@
- AM335X EVM : Software Developement Board for AM335x
compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3"
+
+- AM335X Bone : Low cost community board
+ compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
+
+- OMAP5 EVM : Evaluation Module
+ compatible = "ti,omap5-evm", "ti,omap5"
diff --git a/Documentation/devicetree/bindings/arm/tegra/emc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt
similarity index 98%
rename from Documentation/devicetree/bindings/arm/tegra/emc.txt
rename to Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt
index 09335f8..4c33b29 100644
--- a/Documentation/devicetree/bindings/arm/tegra/emc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt
@@ -15,7 +15,7 @@
Example:
- emc@7000f400 {
+ memory-controller@7000f400 {
#address-cells = < 1 >;
#size-cells = < 0 >;
compatible = "nvidia,tegra20-emc";
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt
index c25a0a5..866d934 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt
@@ -8,7 +8,7 @@
- interrupts : Should contain MC General interrupt.
Example:
- mc {
+ memory-controller@0x7000f000 {
compatible = "nvidia,tegra20-mc";
reg = <0x7000f000 0x024
0x7000f03c 0x3c4>;
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
index e47e73f..bdf1a61 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
@@ -8,7 +8,7 @@
- interrupts : Should contain MC General interrupt.
Example:
- mc {
+ memory-controller {
compatible = "nvidia,tegra30-mc";
reg = <0x7000f000 0x010
0x7000f03c 0x1b4
diff --git a/Documentation/devicetree/bindings/fb/mxsfb.txt b/Documentation/devicetree/bindings/fb/mxsfb.txt
new file mode 100644
index 0000000..b41e5e52
--- /dev/null
+++ b/Documentation/devicetree/bindings/fb/mxsfb.txt
@@ -0,0 +1,19 @@
+* Freescale MXS LCD Interface (LCDIF)
+
+Required properties:
+- compatible: Should be "fsl,<chip>-lcdif". Supported chips include
+ imx23 and imx28.
+- reg: Address and length of the register set for lcdif
+- interrupts: Should contain lcdif interrupts
+
+Optional properties:
+- panel-enable-gpios : Should specify the gpio for panel enable
+
+Examples:
+
+lcdif@80030000 {
+ compatible = "fsl,imx28-lcdif";
+ reg = <0x80030000 2000>;
+ interrupts = <38 86>;
+ panel-enable-gpios = <&gpio3 30 0>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
index 4363ae4..4f39297 100644
--- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
@@ -8,8 +8,16 @@
by low 16 pins and the second one is for high 16 pins.
- gpio-controller : Marks the device node as a gpio controller.
- #gpio-cells : Should be two. The first cell is the pin number and
- the second cell is used to specify optional parameters (currently
- unused).
+ the second cell is used to specify the gpio polarity:
+ 0 = active high
+ 1 = active low
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells : Should be 2. The first cell is the GPIO number.
+ The second cell bits[3:0] is used to specify trigger type and level flags:
+ 1 = low-to-high edge triggered.
+ 2 = high-to-low edge triggered.
+ 4 = active high level-sensitive.
+ 8 = active low level-sensitive.
Example:
@@ -19,4 +27,6 @@
interrupts = <50 51>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt
index 0c35673..1e677a4 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt
@@ -13,8 +13,9 @@
- interrupts : Should be the port interrupt shared by all 32 pins.
- gpio-controller : Marks the device node as a gpio controller.
- #gpio-cells : Should be two. The first cell is the pin number and
- the second cell is used to specify optional parameters (currently
- unused).
+ the second cell is used to specify the gpio polarity:
+ 0 = active high
+ 1 = active low
- interrupt-controller: Marks the device node as an interrupt controller.
- #interrupt-cells : Should be 2. The first cell is the GPIO number.
The second cell bits[3:0] is used to specify trigger type and level flags:
diff --git a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
index ee87467..8315ac7 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
@@ -26,6 +26,6 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
- supports-sleepmode;
+ st,supports-sleepmode;
gpio-bank = <1>;
};
diff --git a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt
similarity index 100%
rename from Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
rename to Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt
diff --git a/Documentation/devicetree/bindings/input/fsl-mma8450.txt b/Documentation/devicetree/bindings/input/fsl-mma8450.txt
index a00c94c..0b96e57 100644
--- a/Documentation/devicetree/bindings/input/fsl-mma8450.txt
+++ b/Documentation/devicetree/bindings/input/fsl-mma8450.txt
@@ -2,6 +2,7 @@
Required properties:
- compatible : "fsl,mma8450".
+- reg: the I2C address of MMA8450
Example:
diff --git a/Documentation/devicetree/bindings/input/tegra-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
similarity index 100%
rename from Documentation/devicetree/bindings/input/tegra-kbc.txt
rename to Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
index 19f6af4..baf0798 100644
--- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt
+++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@@ -46,8 +46,8 @@
ecspi@70010000 { /* ECSPI1 */
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
- <&gpio3 25 0>; /* GPIO4_25 */
+ cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
+ <&gpio4 25 0>; /* GPIO4_25 */
status = "okay";
pmic: mc13892@0 {
diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt
index 645f5ea..d2802d4 100644
--- a/Documentation/devicetree/bindings/mfd/tps65910.txt
+++ b/Documentation/devicetree/bindings/mfd/tps65910.txt
@@ -17,18 +17,46 @@
device need to be present. The definition for each of these nodes is defined
using the standard binding for regulators found at
Documentation/devicetree/bindings/regulator/regulator.txt.
+ The regulator is matched with the regulator-compatible.
- The valid names for regulators are:
+ The valid regulator-compatible values are:
tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
vaux2, vaux33, vmmc
tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
ldo6, ldo7, ldo8
+- xxx-supply: Input voltage supply regulator.
+ These entries are require if regulators are enabled for a device. Missing of these
+ properties can cause the regulator registration fails.
+ If some of input supply is powered through battery or always-on supply then
+ also it is require to have these parameters with proper node handle of always
+ on power supply.
+ tps65910:
+ vcc1-supply: VDD1 input.
+ vcc2-supply: VDD2 input.
+ vcc3-supply: VAUX33 and VMMC input.
+ vcc4-supply: VAUX1 and VAUX2 input.
+ vcc5-supply: VPLL and VDAC input.
+ vcc6-supply: VDIG1 and VDIG2 input.
+ vcc7-supply: VRTC input.
+ vccio-supply: VIO input.
+ tps65911:
+ vcc1-supply: VDD1 input.
+ vcc2-supply: VDD2 input.
+ vcc3-supply: LDO6, LDO7 and LDO8 input.
+ vcc4-supply: LDO5 input.
+ vcc5-supply: LDO3 and LDO4 input.
+ vcc6-supply: LDO1 and LDO2 input.
+ vcc7-supply: VRTC input.
+ vccio-supply: VIO input.
+
Optional properties:
- ti,vmbch-threshold: (tps65911) main battery charged threshold
comparator. (see VMBCH_VSEL in TPS65910 datasheet)
- ti,vmbch2-threshold: (tps65911) main battery discharged threshold
comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL
+ in TPS6591X datasheet)
- ti,en-gpio-sleep: enable sleep control for gpios
There should be 9 entries here, one for each gpio.
@@ -56,74 +84,110 @@
ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+ vcc1-supply = <®_parent>;
+ vcc2-supply = <&some_reg>;
+ vcc3-supply = <...>;
+ vcc4-supply = <...>;
+ vcc5-supply = <...>;
+ vcc6-supply = <...>;
+ vcc7-supply = <...>;
+ vccio-supply = <...>;
+
regulators {
- vdd1_reg: vdd1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd1_reg: regulator@0 {
+ regulator-compatible = "vdd1";
+ reg = <0>;
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <0>;
};
- vdd2_reg: vdd2 {
+ vdd2_reg: regulator@1 {
+ regulator-compatible = "vdd2";
+ reg = <1>;
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <4>;
};
- vddctrl_reg: vddctrl {
+ vddctrl_reg: regulator@2 {
+ regulator-compatible = "vddctrl";
+ reg = <2>;
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <0>;
};
- vio_reg: vio {
+ vio_reg: regulator@3 {
+ regulator-compatible = "vio";
+ reg = <3>;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <1>;
};
- ldo1_reg: ldo1 {
+ ldo1_reg: regulator@4 {
+ regulator-compatible = "ldo1";
+ reg = <4>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
ti,regulator-ext-sleep-control = <0>;
};
- ldo2_reg: ldo2 {
+ ldo2_reg: regulator@5 {
+ regulator-compatible = "ldo2";
+ reg = <5>;
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
ti,regulator-ext-sleep-control = <0>;
};
- ldo3_reg: ldo3 {
+ ldo3_reg: regulator@6 {
+ regulator-compatible = "ldo3";
+ reg = <6>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
ti,regulator-ext-sleep-control = <0>;
};
- ldo4_reg: ldo4 {
+ ldo4_reg: regulator@7 {
+ regulator-compatible = "ldo4";
+ reg = <7>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
ti,regulator-ext-sleep-control = <0>;
};
- ldo5_reg: ldo5 {
+ ldo5_reg: regulator@8 {
+ regulator-compatible = "ldo5";
+ reg = <8>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
ti,regulator-ext-sleep-control = <0>;
};
- ldo6_reg: ldo6 {
+ ldo6_reg: regulator@9 {
+ regulator-compatible = "ldo6";
+ reg = <9>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
ti,regulator-ext-sleep-control = <0>;
};
- ldo7_reg: ldo7 {
+ ldo7_reg: regulator@10 {
+ regulator-compatible = "ldo7";
+ reg = <10>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <1>;
};
- ldo8_reg: ldo8 {
+ ldo8_reg: regulator@11 {
+ regulator-compatible = "ldo8";
+ reg = <11>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
index 0d93b4b..bd9be0b 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
@@ -3,21 +3,22 @@
The Enhanced Secure Digital Host Controller provides an interface
for MMC, SD, and SDIO types of memory cards.
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the sdhci-esdhc driver.
+
Required properties:
- - compatible : should be
- "fsl,<chip>-esdhc", "fsl,esdhc"
- - reg : should contain eSDHC registers location and length.
- - interrupts : should contain eSDHC interrupt.
- interrupt-parent : interrupt source phandle.
- clock-frequency : specifies eSDHC base clock frequency.
- - sdhci,wp-inverted : (optional) specifies that eSDHC controller
- reports inverted write-protect state; New devices should use
- the generic "wp-inverted" property.
- - sdhci,1-bit-only : (optional) specifies that a controller can
- only handle 1-bit data transfers. New devices should use the
- generic "bus-width = <1>" property.
- - sdhci,auto-cmd12: (optional) specifies that a controller can
- only handle auto CMD12.
+
+Optional properties:
+ - sdhci,wp-inverted : specifies that eSDHC controller reports
+ inverted write-protect state; New devices should use the generic
+ "wp-inverted" property.
+ - sdhci,1-bit-only : specifies that a controller can only handle
+ 1-bit data transfers. New devices should use the generic
+ "bus-width = <1>" property.
+ - sdhci,auto-cmd12: specifies that a controller can only handle auto
+ CMD12.
Example:
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
index c7e404b..70cd49b 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -3,17 +3,15 @@
The Enhanced Secure Digital Host Controller on Freescale i.MX family
provides an interface for MMC, SD, and SDIO types of memory cards.
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the sdhci-esdhc-imx driver.
+
Required properties:
- compatible : Should be "fsl,<chip>-esdhc"
-- reg : Should contain eSDHC registers location and length
-- interrupts : Should contain eSDHC interrupt
Optional properties:
-- non-removable : Indicate the card is wired to host permanently
- fsl,cd-internal : Indicate to use controller internal card detection
- fsl,wp-internal : Indicate to use controller internal write protection
-- cd-gpios : Specify GPIOs for card detection
-- wp-gpios : Specify GPIOs for write protection
Examples:
@@ -29,6 +27,6 @@
compatible = "fsl,imx51-esdhc";
reg = <0x70008000 0x4000>;
interrupts = <2>;
- cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
- wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+ cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
+ wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
};
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
index d64aea5..0e5e2ec 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
@@ -1,8 +1,9 @@
MMC/SD/SDIO slot directly connected to a SPI bus
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the mmc_spi driver.
+
Required properties:
-- compatible : should be "mmc-spi-slot".
-- reg : should specify SPI address (chip-select number).
- spi-max-frequency : maximum frequency for this device (Hz).
- voltage-ranges : two cells are required, first cell specifies minimum
slot voltage (mV), second cell specifies maximum slot voltage (mV).
@@ -11,8 +12,7 @@
Optional properties:
- gpios : may specify GPIOs in this order: Card-Detect GPIO,
Write-Protect GPIO. Note that this does not follow the
- binding from mmc.txt, for historic reasons.
-- interrupts : the interrupt of a card detect interrupt.
+ binding from mmc.txt, for historical reasons.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index 6e70dcd..8a6811f 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -2,13 +2,17 @@
that requires the respective functionality should implement them using
these definitions.
+Interpreted by the OF core:
+- reg: Registers location and length.
+- interrupts: Interrupts used by the MMC controller.
+
Required properties:
- bus-width: Number of data lines, can be <1>, <4>, or <8>
Optional properties:
-- cd-gpios : Specify GPIOs for card detection, see gpio binding
-- wp-gpios : Specify GPIOs for write protection, see gpio binding
-- cd-inverted: when present, polarity on the wp gpio line is inverted
+- cd-gpios: Specify GPIOs for card detection, see gpio binding
+- wp-gpios: Specify GPIOs for write protection, see gpio binding
+- cd-inverted: when present, polarity on the cd gpio line is inverted
- wp-inverted: when present, polarity on the wp gpio line is inverted
- non-removable: non-removable slot (like eMMC)
- max-frequency: maximum operating clock frequency
diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt
index 14a81d5..2b584ca 100644
--- a/Documentation/devicetree/bindings/mmc/mmci.txt
+++ b/Documentation/devicetree/bindings/mmc/mmci.txt
@@ -1,19 +1,15 @@
* ARM PrimeCell MultiMedia Card Interface (MMCI) PL180/1
-The ARM PrimeCell MMCI PL180 and PL181 provides and interface for
+The ARM PrimeCell MMCI PL180 and PL181 provides an interface for
reading and writing to MultiMedia and SD cards alike.
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the mmci driver.
+
Required properties:
- compatible : contains "arm,pl18x", "arm,primecell".
-- reg : contains pl18x registers and length.
-- interrupts : contains the device IRQ(s).
- arm,primecell-periphid : contains the PrimeCell Peripheral ID.
Optional properties:
-- wp-gpios : contains any write protect (ro) gpios
-- cd-gpios : contains any card detection gpios
-- cd-inverted : indicates whether the cd gpio is inverted
-- max-frequency : contains the maximum operating frequency
-- bus-width : number of data lines, can be <1>, <4>, or <8>
- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable
- mmc-cap-sd-highspeed : indicates whether SD is high speed capable
diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
index 14d870a..54949f6 100644
--- a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
@@ -3,16 +3,14 @@
The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller
to support MMC, SD, and SDIO types of memory cards.
+This file documents differences between the core properties in mmc.txt
+and the properties used by the mxsmmc driver.
+
Required properties:
- compatible: Should be "fsl,<chip>-mmc". The supported chips include
imx23 and imx28.
-- reg: Should contain registers location and length
- interrupts: Should contain ERROR and DMA interrupts
- fsl,ssp-dma-channel: APBH DMA channel for the SSP
-- bus-width: Number of data lines, can be <1>, <4>, or <8>
-
-Optional properties:
-- wp-gpios: Specify GPIOs for write protection
Examples:
diff --git a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
similarity index 67%
rename from Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
rename to Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
index f77c303..c6d7b11 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -3,15 +3,13 @@
This controller on Tegra family SoCs provides an interface for MMC, SD,
and SDIO types of memory cards.
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the sdhci-tegra driver.
+
Required properties:
- compatible : Should be "nvidia,<chip>-sdhci"
-- reg : Should contain SD/MMC registers location and length
-- interrupts : Should contain SD/MMC interrupt
-- bus-width : Number of data lines, can be <1>, <4>, or <8>
Optional properties:
-- cd-gpios : Specify GPIOs for card detection
-- wp-gpios : Specify GPIOs for write protection
- power-gpios : Specify GPIOs for power control
Example:
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
new file mode 100644
index 0000000..dbe98a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
@@ -0,0 +1,21 @@
+* Marvell sdhci-pxa v2/v3 controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers.
+
+Required properties:
+- compatible: Should be "mrvl,pxav2-mmc" or "mrvl,pxav3-mmc".
+
+Optional properties:
+- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
+
+Example:
+
+sdhci@d4280800 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0xd4280800 0x800>;
+ bus-width = <8>;
+ interrupts = <27>;
+ non-removable;
+ mrvl,clk-delay-cycles = <31>;
+};
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index 8a53958..be76a23 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -3,21 +3,20 @@
The Highspeed MMC Host Controller on TI OMAP family
provides an interface for MMC, SD, and SDIO types of memory cards.
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap_hsmmc driver.
+
Required properties:
- compatible:
Should be "ti,omap2-hsmmc", for OMAP2 controllers
Should be "ti,omap3-hsmmc", for OMAP3 controllers
Should be "ti,omap4-hsmmc", for OMAP4 controllers
- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1
-- reg : should contain hsmmc registers location and length
Optional properties:
ti,dual-volt: boolean, supports dual voltage cards
<supply-name>-supply: phandle to the regulator device tree node
"supply-name" examples are "vmmc", "vmmc_aux" etc
-bus-width: Number of data lines, default assumed is 1 if the property is missing.
-cd-gpios: GPIOs for card detection
-wp-gpios: GPIOs for write protection
ti,non-removable: non-removable slot (like eMMC)
ti,needs-special-reset: Requires a special softreset sequence
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index 7ab9e1a..4616fc2 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -19,6 +19,6 @@
reg = <0x83fec000 0x4000>;
interrupts = <87>;
phy-mode = "mii";
- phy-reset-gpios = <&gpio1 14 0>; /* GPIO2_14 */
+ phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
local-mac-address = [00 04 9F 01 1B B9];
};
diff --git a/Documentation/devicetree/bindings/nvec/nvec_nvidia.txt b/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt
similarity index 100%
rename from Documentation/devicetree/bindings/nvec/nvec_nvidia.txt
rename to Documentation/devicetree/bindings/nvec/nvidia,nvec.txt
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
index 82b43f9..a4119f6 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
@@ -1626,3 +1626,5 @@
MX6Q_PAD_SD2_DAT3__GPIO_1_12 1588
MX6Q_PAD_SD2_DAT3__SJC_DONE 1589
MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 1590
+MX6Q_PAD_ENET_RX_ER__ANATOP_USBOTG_ID 1591
+MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID 1592
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
index 2f5b6b1..4fae41d 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
@@ -10,6 +10,7 @@
If this property is missing, the default assumed is Active low.
- gpio-open-drain: GPIO is open drain type.
If this property is missing then default assumption is false.
+-vin-supply: Input supply name.
Any property defined as part of the core regulator
binding, defined in regulator.txt, can also be used.
@@ -29,4 +30,5 @@
enable-active-high;
regulator-boot-on;
gpio-open-drain;
+ vin-supply = <&parent_reg>;
};
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 5b7a408..66ece3f 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -10,6 +10,11 @@
- regulator-always-on: boolean, regulator should never be disabled
- regulator-boot-on: bootloader/firmware enabled regulator
- <name>-supply: phandle to the parent supply/regulator node
+- regulator-ramp-delay: ramp delay for regulator(in uV/uS)
+- regulator-compatible: If a regulator chip contains multiple
+ regulators, and if the chip's binding contains a child node that
+ describes each regulator, then this property indicates which regulator
+ this child node is intended to configure.
Example:
diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt
new file mode 100644
index 0000000..0487e96
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65217.txt
@@ -0,0 +1,91 @@
+TPS65217 family of regulators
+
+Required properties:
+- compatible: "ti,tps65217"
+- reg: I2C slave address
+- regulators: list of regulators provided by this controller, must be named
+ after their hardware counterparts: dcdc[1-3] and ldo[1-4]
+- regulators: This is the list of child nodes that specify the regulator
+ initialization data for defined regulators. Not all regulators for the given
+ device need to be present. The definition for each of these nodes is defined
+ using the standard binding for regulators found at
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+
+ The valid names for regulators are:
+ tps65217: dcdc1, dcdc2, dcdc3, ldo1, ldo2, ldo3 and ldo4
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+ tps: tps@24 {
+ compatible = "ti,tps65217";
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dcdc1_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "dcdc1";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ reg = <1>;
+ regulator-compatible = "dcdc2";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ reg = <2>;
+ regulator-compatible = "dcdc3";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "ldo1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ reg = <4>;
+ regulator-compatible = "ldo2";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt
index 0fcabaa..d156e1b 100644
--- a/Documentation/devicetree/bindings/regulator/tps6586x.txt
+++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt
@@ -6,8 +6,17 @@
- interrupts: the interrupt outputs of the controller
- #gpio-cells: number of cells to describe a GPIO
- gpio-controller: mark the device as a GPIO controller
-- regulators: list of regulators provided by this controller, must be named
- after their hardware counterparts: sm[0-2], ldo[0-9] and ldo_rtc
+- regulators: list of regulators provided by this controller, must have
+ property "regulator-compatible" to match their hardware counterparts:
+ sm[0-2], ldo[0-9] and ldo_rtc
+- sm0-supply: The input supply for the SM0.
+- sm1-supply: The input supply for the SM1.
+- sm2-supply: The input supply for the SM2.
+- vinldo01-supply: The input supply for the LDO1 and LDO2
+- vinldo23-supply: The input supply for the LDO2 and LDO3
+- vinldo4-supply: The input supply for the LDO4
+- vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8
+- vinldo9-supply: The input supply for the LDO9
Each regulator is defined using the standard binding for regulators.
@@ -21,75 +30,113 @@
#gpio-cells = <2>;
gpio-controller;
+ sm0-supply = <&some_reg>;
+ sm1-supply = <&some_reg>;
+ sm2-supply = <&some_reg>;
+ vinldo01-supply = <...>;
+ vinldo23-supply = <...>;
+ vinldo4-supply = <...>;
+ vinldo678-supply = <...>;
+ vinldo9-supply = <...>;
+
regulators {
- sm0_reg: sm0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sm0_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "sm0";
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
- sm1_reg: sm1 {
+ sm1_reg: regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sm1";
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
- sm2_reg: sm2 {
+ sm2_reg: regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sm2";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <4550000>;
regulator-boot-on;
regulator-always-on;
};
- ldo0_reg: ldo0 {
+ ldo0_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "ldo0";
regulator-name = "PCIE CLK";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- ldo1_reg: ldo1 {
+ ldo1_reg: regulator@4 {
+ reg = <4>;
+ regulator-compatible = "ldo1";
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
};
- ldo2_reg: ldo2 {
+ ldo2_reg: regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo2";
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
};
- ldo3_reg: ldo3 {
+ ldo3_reg: regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo3";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
- ldo4_reg: ldo4 {
+ ldo4_reg: regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo4";
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <2475000>;
};
- ldo5_reg: ldo5 {
+ ldo5_reg: regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo5";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
- ldo6_reg: ldo6 {
+ ldo6_reg: regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo6";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
- ldo7_reg: ldo7 {
+ ldo7_reg: regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo7";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
- ldo8_reg: ldo8 {
+ ldo8_reg: regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo8";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
- ldo9_reg: ldo9 {
+ ldo9_reg: regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo9";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
diff --git a/Documentation/devicetree/bindings/regulator/twl-regulator.txt b/Documentation/devicetree/bindings/regulator/twl-regulator.txt
index 0c3395d..658749b 100644
--- a/Documentation/devicetree/bindings/regulator/twl-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/twl-regulator.txt
@@ -15,7 +15,6 @@
- "ti,twl6030-vusb" for VUSB LDO
- "ti,twl6030-v1v8" for V1V8 LDO
- "ti,twl6030-v2v1" for V2V1 LDO
- - "ti,twl6030-clk32kg" for CLK32KG RESOURCE
- "ti,twl6030-vdd1" for VDD1 SMPS
- "ti,twl6030-vdd2" for VDD2 SMPS
- "ti,twl6030-vdd3" for VDD3 SMPS
diff --git a/Documentation/devicetree/bindings/rtc/dw-apb.txt b/Documentation/devicetree/bindings/rtc/dw-apb.txt
new file mode 100644
index 0000000..93e2b0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/dw-apb.txt
@@ -0,0 +1,25 @@
+* Designware APB timer
+
+Required properties:
+- compatible: "snps,dw-apb-timer-sp" or "snps,dw-apb-timer-osc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: IRQ line for the timer.
+- clock-frequency: The frequency in HZ of the timer.
+- clock-freq: For backwards compatibility with picoxcell
+
+Example:
+
+ timer1: timer@ffc09000 {
+ compatible = "snps,dw-apb-timer-sp";
+ interrupts = <0 168 4>;
+ clock-frequency = <200000000>;
+ reg = <0xffc09000 0x1000>;
+ };
+
+ timer2: timer@ffd00000 {
+ compatible = "snps,dw-apb-timer-osc";
+ interrupts = <0 169 4>;
+ clock-frequency = <200000000>;
+ reg = <0xffd00000 0x1000>;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
new file mode 100644
index 0000000..b800070
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
@@ -0,0 +1,16 @@
+* STMP3xxx/i.MX28 Time Clock controller
+
+Required properties:
+- compatible: should be one of the following.
+ * "fsl,stmp3xxx-rtc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: rtc alarm interrupt
+
+Example:
+
+rtc@80056000 {
+ compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+ reg = <0x80056000 2000>;
+ interrupts = <29>;
+};
diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-alc5632.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
similarity index 100%
rename from Documentation/devicetree/bindings/sound/tegra-audio-alc5632.txt
rename to Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt
similarity index 100%
rename from Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt
rename to Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt
diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
similarity index 100%
rename from Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt
rename to Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
similarity index 100%
rename from Documentation/devicetree/bindings/sound/tegra-audio-wm8903.txt
rename to Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
diff --git a/Documentation/devicetree/bindings/sound/tegra20-das.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-das.txt
similarity index 100%
rename from Documentation/devicetree/bindings/sound/tegra20-das.txt
rename to Documentation/devicetree/bindings/sound/nvidia,tegra20-das.txt
diff --git a/Documentation/devicetree/bindings/sound/tegra20-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
similarity index 100%
rename from Documentation/devicetree/bindings/sound/tegra20-i2s.txt
rename to Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index 9841057..4256a6d 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -17,6 +17,6 @@
reg = <0x70010000 0x4000>;
interrupts = <36>;
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
- <&gpio3 25 0>; /* GPIO4_25 */
+ cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */
+ <&gpio3 25 0>; /* GPIO3_25 */
};
diff --git a/Documentation/devicetree/bindings/spi/spi_nvidia.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt
similarity index 100%
rename from Documentation/devicetree/bindings/spi/spi_nvidia.txt
rename to Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt
diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt
new file mode 100644
index 0000000..a15ffed
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt
@@ -0,0 +1,116 @@
+* Samsung SPI Controller
+
+The Samsung SPI controller is used to interface with various devices such as flash
+and display controllers using the SPI communication interface.
+
+Required SoC Specific Properties:
+
+- compatible: should be one of the following.
+ - samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms
+ - samsung,s3c6410-spi: for s3c6410 platforms
+ - samsung,s5p6440-spi: for s5p6440 and s5p6450 platforms
+ - samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms
+ - samsung,exynos4210-spi: for exynos4 and exynos5 platforms
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+ depends on the interrupt controller.
+
+[PRELIMINARY: the dma channel allocation will change once there are
+official DMA bindings]
+
+- tx-dma-channel: The dma channel specifier for tx operations. The format of
+ the dma specifier depends on the dma controller.
+
+- rx-dma-channel: The dma channel specifier for rx operations. The format of
+ the dma specifier depends on the dma controller.
+
+Required Board Specific Properties:
+
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- gpios: The gpio specifier for clock, mosi and miso interface lines (in the
+ order specified). The format of the gpio specifier depends on the gpio
+ controller.
+
+Optional Board Specific Properties:
+
+- samsung,spi-src-clk: If the spi controller includes a internal clock mux to
+ select the clock source for the spi bus clock, this property can be used to
+ indicate the clock to be used for driving the spi bus clock. If not specified,
+ the clock number 0 is used as default.
+
+- num-cs: Specifies the number of chip select lines supported. If
+ not specified, the default number of chip select lines is set to 1.
+
+SPI Controller specific data in SPI slave nodes:
+
+- The spi slave nodes should provide the following information which is required
+ by the spi controller.
+
+ - cs-gpio: A gpio specifier that specifies the gpio line used as
+ the slave select line by the spi controller. The format of the gpio
+ specifier depends on the gpio controller.
+
+ - samsung,spi-feedback-delay: The sampling phase shift to be applied on the
+ miso line (to account for any lag in the miso line). The following are the
+ valid values.
+
+ - 0: No phase shift.
+ - 1: 90 degree phase shift sampling.
+ - 2: 180 degree phase shift sampling.
+ - 3: 270 degree phase shift sampling.
+
+Aliases:
+
+- All the SPI controller nodes should be represented in the aliases node using
+ the following format 'spi{n}' where n is a unique number for the alias.
+
+
+Example:
+
+- SoC Specific Portion:
+
+ spi_0: spi@12d20000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x12d20000 0x100>;
+ interrupts = <0 66 0>;
+ tx-dma-channel = <&pdma0 5>;
+ rx-dma-channel = <&pdma0 4>;
+ };
+
+- Board Specific Portion:
+
+ spi_0: spi@12d20000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&gpa2 4 2 3 0>,
+ <&gpa2 6 2 3 0>,
+ <&gpa2 7 2 3 0>;
+
+ w25q80bw@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25x80";
+ reg = <0>;
+ spi-max-frequency = <10000>;
+
+ controller-data {
+ cs-gpio = <&gpa2 5 1 0 3>;
+ samsung,spi-feedback-delay = <0>;
+ };
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0xc0000>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
new file mode 100644
index 0000000..2ee903f
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
@@ -0,0 +1,27 @@
+* Freescale MXS Application UART (AUART)
+
+Required properties:
+- compatible : Should be "fsl,<soc>-auart". The supported SoCs include
+ imx23 and imx28.
+- reg : Address and length of the register set for the device
+- interrupts : Should contain the auart interrupt numbers
+
+Example:
+auart0: serial@8006a000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112 70 71>;
+};
+
+Note: Each auart port should have an alias correctly numbered in "aliases"
+node.
+
+Example:
+
+aliases {
+ serial0 = &auart0;
+ serial1 = &auart1;
+ serial2 = &auart2;
+ serial3 = &auart3;
+ serial4 = &auart4;
+};
diff --git a/Documentation/devicetree/bindings/usb/tegra-usb.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
similarity index 100%
rename from Documentation/devicetree/bindings/usb/tegra-usb.txt
rename to Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 6eab917..db4d3af 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -3,6 +3,7 @@
This isn't an exhaustive list, but you should add new prefixes to it before
using them to avoid name-space collisions.
+ad Avionic Design GmbH
adi Analog Devices, Inc.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
apm Applied Micro Circuits Corporation (APM)
diff --git a/Documentation/devicetree/bindings/watchdog/omap-wdt.txt b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
new file mode 100644
index 0000000..c227970
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
@@ -0,0 +1,14 @@
+TI Watchdog Timer (WDT) Controller for OMAP
+
+Required properties:
+compatible:
+- "ti,omap3-wdt" for OMAP3
+- "ti,omap4-wdt" for OMAP4
+- ti,hwmods: Name of the hwmod associated to the WDT
+
+Examples:
+
+wdt2: wdt@4a314000 {
+ compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+ ti,hwmods = "wd_timer2";
+};
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 8e2da1e..e0cce2a 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -9,7 +9,7 @@
--------------------------- dentry_operations --------------------------
prototypes:
- int (*d_revalidate)(struct dentry *, struct nameidata *);
+ int (*d_revalidate)(struct dentry *, unsigned int);
int (*d_hash)(const struct dentry *, const struct inode *,
struct qstr *);
int (*d_compare)(const struct dentry *, const struct inode *,
@@ -37,9 +37,8 @@
--------------------------- inode_operations ---------------------------
prototypes:
- int (*create) (struct inode *,struct dentry *,umode_t, struct nameidata *);
- struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameid
-ata *);
+ int (*create) (struct inode *,struct dentry *,umode_t, bool);
+ struct dentry * (*lookup) (struct inode *,struct dentry *, unsigned int);
int (*link) (struct dentry *,struct inode *,struct dentry *);
int (*unlink) (struct inode *,struct dentry *);
int (*symlink) (struct inode *,struct dentry *,const char *);
@@ -62,6 +61,9 @@
int (*removexattr) (struct dentry *, const char *);
int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len);
void (*update_time)(struct inode *, struct timespec *, int);
+ int (*atomic_open)(struct inode *, struct dentry *,
+ struct file *, unsigned open_flag,
+ umode_t create_mode, int *opened);
locking rules:
all may block
@@ -89,6 +91,7 @@
removexattr: yes
fiemap: no
update_time: no
+atomic_open: yes
Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_mutex on
victim.
diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting
index 8c91d10..2bef2b3 100644
--- a/Documentation/filesystems/porting
+++ b/Documentation/filesystems/porting
@@ -355,12 +355,10 @@
via rcu-walk path walk (basically, if the file can have had a path name in the
vfs namespace).
- i_dentry and i_rcu share storage in a union, and the vfs expects
-i_dentry to be reinitialized before it is freed, so an:
-
- INIT_LIST_HEAD(&inode->i_dentry);
-
-must be done in the RCU callback.
+ Even though i_dentry and i_rcu share storage in a union, we will
+initialize the former in inode_init_always(), so just leave it alone in
+the callback. It used to be necessary to clean it there, but not anymore
+(starting at 3.2).
--
[recommended]
@@ -433,3 +431,14 @@
d_alloc_root() is gone, along with a lot of bugs caused by code
misusing it. Replacement: d_make_root(inode). The difference is,
d_make_root() drops the reference to inode if dentry allocation fails.
+
+--
+[mandatory]
+ The witch is dead! Well, 2/3 of it, anyway. ->d_revalidate() and
+->lookup() do *not* take struct nameidata anymore; just the flags.
+--
+[mandatory]
+ ->create() doesn't take struct nameidata *; unlike the previous
+two, it gets "is it an O_EXCL or equivalent?" boolean argument. Note that
+local filesystems can ignore tha argument - they are guaranteed that the
+object doesn't exist. It's remote/distributed ones that might care...
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index efd23f4..aa754e0 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -341,8 +341,8 @@
filesystem. As of kernel 2.6.22, the following members are defined:
struct inode_operations {
- int (*create) (struct inode *,struct dentry *, umode_t, struct nameidata *);
- struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameidata *);
+ int (*create) (struct inode *,struct dentry *, umode_t, bool);
+ struct dentry * (*lookup) (struct inode *,struct dentry *, unsigned int);
int (*link) (struct dentry *,struct inode *,struct dentry *);
int (*unlink) (struct inode *,struct dentry *);
int (*symlink) (struct inode *,struct dentry *,const char *);
@@ -364,6 +364,9 @@
ssize_t (*listxattr) (struct dentry *, char *, size_t);
int (*removexattr) (struct dentry *, const char *);
void (*update_time)(struct inode *, struct timespec *, int);
+ int (*atomic_open)(struct inode *, struct dentry *,
+ struct file *, unsigned open_flag,
+ umode_t create_mode, int *opened);
};
Again, all methods are called without any locks being held, unless
@@ -476,6 +479,14 @@
an inode. If this is not defined the VFS will update the inode itself
and call mark_inode_dirty_sync.
+ atomic_open: called on the last component of an open. Using this optional
+ method the filesystem can look up, possibly create and open the file in
+ one atomic operation. If it cannot perform this (e.g. the file type
+ turned out to be wrong) it may signal this by returning 1 instead of
+ usual 0 or -ve . This method is only called if the last
+ component is negative or needs lookup. Cached positive dentries are
+ still handled by f_op->open().
+
The Address Space Object
========================
@@ -891,7 +902,7 @@
defined:
struct dentry_operations {
- int (*d_revalidate)(struct dentry *, struct nameidata *);
+ int (*d_revalidate)(struct dentry *, unsigned int);
int (*d_hash)(const struct dentry *, const struct inode *,
struct qstr *);
int (*d_compare)(const struct dentry *, const struct inode *,
@@ -910,11 +921,11 @@
dcache. Most filesystems leave this as NULL, because all their
dentries in the dcache are valid
- d_revalidate may be called in rcu-walk mode (nd->flags & LOOKUP_RCU).
+ d_revalidate may be called in rcu-walk mode (flags & LOOKUP_RCU).
If in rcu-walk mode, the filesystem must revalidate the dentry without
blocking or storing to the dentry, d_parent and d_inode should not be
- used without care (because they can go NULL), instead nd->inode should
- be used.
+ used without care (because they can change and, in d_inode case, even
+ become NULL under us).
If a situation is encountered that rcu-walk cannot handle, return
-ECHILD and it will be called again in ref-walk mode.
diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp
index 84d46c0..c86b50c 100644
--- a/Documentation/hwmon/coretemp
+++ b/Documentation/hwmon/coretemp
@@ -6,7 +6,9 @@
Prefix: 'coretemp'
CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
- 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield)
+ 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield),
+ 0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom),
+ 0x36 (Cedar Trail Atom)
Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 3A: System Programming Guide
http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
@@ -52,6 +54,17 @@
Process Processor TjMax(C)
+22nm Core i5/i7 Processors
+ i7 3920XM, 3820QM, 3720QM, 3667U, 3520M 105
+ i5 3427U, 3360M/3320M 105
+ i7 3770/3770K 105
+ i5 3570/3570K, 3550, 3470/3450 105
+ i7 3770S 103
+ i5 3570S/3550S, 3475S/3470S/3450S 103
+ i7 3770T 94
+ i5 3570T 94
+ i5 3470T 91
+
32nm Core i3/i5/i7 Processors
i7 660UM/640/620, 640LM/620, 620M, 610E 105
i5 540UM/520/430, 540M/520/450/430 105
@@ -65,6 +78,11 @@
U3400 105
P4505/P4500 90
+32nm Atom Processors
+ Z2460 90
+ D2700/2550/2500 100
+ N2850/2800/2650/2600 100
+
45nm Xeon Processors 5400 Quad-Core
X5492, X5482, X5472, X5470, X5460, X5450 85
E5472, E5462, E5450/40/30/20/10/05 85
@@ -85,6 +103,8 @@
N475/470/455/450 100
N280/270 90
330/230 125
+ E680/660/640/620 90
+ E680T/660T/640T/620T 110
45nm Core2 Processors
Solo ULV SU3500/3300 100
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index 506c739..13f1aa0 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -86,7 +86,7 @@
http://www.kernel.org/git/?p=utils/kernel/kexec/kexec-tools.git
More information about kexec-tools can be found at
-http://www.kernel.org/pub/linux/utils/kernel/kexec/README.html
+http://horms.net/projects/kexec/
3) Unpack the tarball with the tar command, as follows:
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a92c5eb..12783fa 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2367,6 +2367,11 @@
Set maximum number of finished RCU callbacks to process
in one batch.
+ rcutree.fanout_leaf= [KNL,BOOT]
+ Increase the number of CPUs assigned to each
+ leaf rcu_node structure. Useful for very large
+ systems.
+
rcutree.qhimark= [KNL,BOOT]
Set threshold of queued
RCU callbacks over which batch limiting is disabled.
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index ab1e8d7..5cb9a19 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -10,8 +10,8 @@
(i.e. 7xxx/5xxx SoCs), SPEAr (arm), Loongson1B (mips) and XLINX XC2V3000
FF1152AMT0221 D1215994A VIRTEX FPGA board.
-DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether MAC 10/100
-Universal version 4.0 have been used for developing this driver.
+DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether
+MAC 10/100 Universal version 4.0 have been used for developing this driver.
This driver supports both the platform bus and PCI.
@@ -54,27 +54,27 @@
When one or more packets are received, an interrupt happens. The interrupts
are not queued so the driver has to scan all the descriptors in the ring during
the receive process.
-This is based on NAPI so the interrupt handler signals only if there is work to be
-done, and it exits.
+This is based on NAPI so the interrupt handler signals only if there is work
+to be done, and it exits.
Then the poll method will be scheduled at some future point.
The incoming packets are stored, by the DMA, in a list of pre-allocated socket
buffers in order to avoid the memcpy (Zero-copy).
4.3) Timer-Driver Interrupt
-Instead of having the device that asynchronously notifies the frame receptions, the
-driver configures a timer to generate an interrupt at regular intervals.
-Based on the granularity of the timer, the frames that are received by the device
-will experience different levels of latency. Some NICs have dedicated timer
-device to perform this task. STMMAC can use either the RTC device or the TMU
-channel 2 on STLinux platforms.
+Instead of having the device that asynchronously notifies the frame receptions,
+the driver configures a timer to generate an interrupt at regular intervals.
+Based on the granularity of the timer, the frames that are received by the
+device will experience different levels of latency. Some NICs have dedicated
+timer device to perform this task. STMMAC can use either the RTC device or the
+TMU channel 2 on STLinux platforms.
The timers frequency can be passed to the driver as parameter; when change it,
take care of both hardware capability and network stability/performance impact.
-Several performance tests on STM platforms showed this optimisation allows to spare
-the CPU while having the maximum throughput.
+Several performance tests on STM platforms showed this optimisation allows to
+spare the CPU while having the maximum throughput.
4.4) WOL
-Wake up on Lan feature through Magic and Unicast frames are supported for the GMAC
-core.
+Wake up on Lan feature through Magic and Unicast frames are supported for the
+GMAC core.
4.5) DMA descriptors
Driver handles both normal and enhanced descriptors. The latter has been only
@@ -106,7 +106,8 @@
These are included in the include/linux/stmmac.h header file
and detailed below as well:
- struct plat_stmmacenet_data {
+struct plat_stmmacenet_data {
+ char *phy_bus_name;
int bus_id;
int phy_addr;
int interface;
@@ -124,19 +125,24 @@
void (*bus_setup)(void __iomem *ioaddr);
int (*init)(struct platform_device *pdev);
void (*exit)(struct platform_device *pdev);
+ void *custom_cfg;
+ void *custom_data;
void *bsp_priv;
};
Where:
+ o phy_bus_name: phy bus name to attach to the stmmac.
o bus_id: bus identifier.
o phy_addr: the physical address can be passed from the platform.
If it is set to -1 the driver will automatically
detect it at run-time by probing all the 32 addresses.
o interface: PHY device's interface.
o mdio_bus_data: specific platform fields for the MDIO bus.
- o pbl: the Programmable Burst Length is maximum number of beats to
+ o dma_cfg: internal DMA parameters
+ o pbl: the Programmable Burst Length is maximum number of beats to
be transferred in one DMA transaction.
GMAC also enables the 4xPBL by default.
+ o fixed_burst/mixed_burst/burst_len
o clk_csr: fixed CSR Clock range selection.
o has_gmac: uses the GMAC core.
o enh_desc: if sets the MAC will use the enhanced descriptor structure.
@@ -160,8 +166,9 @@
this is sometime necessary on some platforms (e.g. ST boxes)
where the HW needs to have set some PIO lines or system cfg
registers.
- o custom_cfg: this is a custom configuration that can be passed while
- initialising the resources.
+ o custom_cfg/custom_data: this is a custom configuration that can be passed
+ while initialising the resources.
+ o bsp_priv: another private poiter.
For MDIO bus The we have:
@@ -180,7 +187,6 @@
o irqs: list of IRQs, one per PHY.
o probed_phy_irq: if irqs is NULL, use this for probed PHY.
-
For DMA engine we have the following internal fields that should be
tuned according to the HW capabilities.
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index 872815c..504dfe4 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -583,9 +583,10 @@
subsystem-level callbacks. Specifically, if a device's pm_domain pointer is
not NULL, the ->suspend() callback from the object pointed to by it will be
executed instead of its subsystem's (e.g. bus type's) ->suspend() callback and
-anlogously for all of the remaining callbacks. In other words, power management
-domain callbacks, if defined for the given device, always take precedence over
-the callbacks provided by the device's subsystem (e.g. bus type).
+analogously for all of the remaining callbacks. In other words, power
+management domain callbacks, if defined for the given device, always take
+precedence over the callbacks provided by the device's subsystem (e.g. bus
+type).
The support for device power management domains is only relevant to platforms
needing to use the same device driver power management callbacks in many
@@ -598,7 +599,7 @@
Device Low Power (suspend) States
---------------------------------
Device low-power states aren't standard. One device might only handle
-"on" and "off, while another might support a dozen different versions of
+"on" and "off", while another might support a dozen different versions of
"on" (how many engines are active?), plus a state that gets back to "on"
faster than from a full "off".
diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt
index ac190cf..92341b8 100644
--- a/Documentation/power/swsusp.txt
+++ b/Documentation/power/swsusp.txt
@@ -33,6 +33,11 @@
echo platform > /sys/power/disk; echo disk > /sys/power/state
+. If you would like to write hibernation image to swap and then suspend
+to RAM (provided your platform supports it), you can try
+
+echo suspend > /sys/power/disk; echo disk > /sys/power/state
+
. If you have SATA disks, you'll need recent kernels with SATA suspend
support. For suspend and resume to work, make sure your disk drivers
are built into kernel -- not modules. [There's way to make
diff --git a/Documentation/prctl/no_new_privs.txt b/Documentation/prctl/no_new_privs.txt
new file mode 100644
index 0000000..f7be84f
--- /dev/null
+++ b/Documentation/prctl/no_new_privs.txt
@@ -0,0 +1,57 @@
+The execve system call can grant a newly-started program privileges that
+its parent did not have. The most obvious examples are setuid/setgid
+programs and file capabilities. To prevent the parent program from
+gaining these privileges as well, the kernel and user code must be
+careful to prevent the parent from doing anything that could subvert the
+child. For example:
+
+ - The dynamic loader handles LD_* environment variables differently if
+ a program is setuid.
+
+ - chroot is disallowed to unprivileged processes, since it would allow
+ /etc/passwd to be replaced from the point of view of a process that
+ inherited chroot.
+
+ - The exec code has special handling for ptrace.
+
+These are all ad-hoc fixes. The no_new_privs bit (since Linux 3.5) is a
+new, generic mechanism to make it safe for a process to modify its
+execution environment in a manner that persists across execve. Any task
+can set no_new_privs. Once the bit is set, it is inherited across fork,
+clone, and execve and cannot be unset. With no_new_privs set, execve
+promises not to grant the privilege to do anything that could not have
+been done without the execve call. For example, the setuid and setgid
+bits will no longer change the uid or gid; file capabilities will not
+add to the permitted set, and LSMs will not relax constraints after
+execve.
+
+To set no_new_privs, use prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0).
+
+Be careful, though: LSMs might also not tighten constraints on exec
+in no_new_privs mode. (This means that setting up a general-purpose
+service launcher to set no_new_privs before execing daemons may
+interfere with LSM-based sandboxing.)
+
+Note that no_new_privs does not prevent privilege changes that do not
+involve execve. An appropriately privileged task can still call
+setuid(2) and receive SCM_RIGHTS datagrams.
+
+There are two main use cases for no_new_privs so far:
+
+ - Filters installed for the seccomp mode 2 sandbox persist across
+ execve and can change the behavior of newly-executed programs.
+ Unprivileged users are therefore only allowed to install such filters
+ if no_new_privs is set.
+
+ - By itself, no_new_privs can be used to reduce the attack surface
+ available to an unprivileged user. If everything running with a
+ given uid has no_new_privs set, then that uid will be unable to
+ escalate its privileges by directly attacking setuid, setgid, and
+ fcap-using binaries; it will need to compromise something without the
+ no_new_privs bit set first.
+
+In the future, other potentially dangerous kernel features could become
+available to unprivileged tasks if no_new_privs is set. In principle,
+several options to unshare(2) and clone(2) would be safe when
+no_new_privs is set, and no_new_privs + chroot is considerable less
+dangerous than chroot by itself.
diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt
index f0ab5cf..4a7b54b 100644
--- a/Documentation/stable_kernel_rules.txt
+++ b/Documentation/stable_kernel_rules.txt
@@ -12,6 +12,12 @@
marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
security issue, or some "oh, that's not good" issue. In short, something
critical.
+ - Serious issues as reported by a user of a distribution kernel may also
+ be considered if they fix a notable performance or interactivity issue.
+ As these fixes are not as obvious and have a higher risk of a subtle
+ regression they should only be submitted by a distribution kernel
+ maintainer and include an addendum linking to a bugzilla entry if it
+ exists and additional information on the user-visible impact.
- New device IDs and quirks are also accepted.
- No "theoretical race condition" issues, unless an explanation of how the
race can be exploited is also provided.
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 9301266..2c99483 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1930,6 +1930,23 @@
PTE's RPN field (ie, it needs to be shifted left by 12 to OR it
into the hash PTE second double word).
+4.75 KVM_IRQFD
+
+Capability: KVM_CAP_IRQFD
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_irqfd (in)
+Returns: 0 on success, -1 on error
+
+Allows setting an eventfd to directly trigger a guest interrupt.
+kvm_irqfd.fd specifies the file descriptor to use as the eventfd and
+kvm_irqfd.gsi specifies the irqchip pin toggled by this event. When
+an event is tiggered on the eventfd, an interrupt is injected into
+the guest using the specified gsi pin. The irqfd is removed using
+the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd
+and kvm_irqfd.gsi.
+
+
5. The kvm_run structure
------------------------
diff --git a/MAINTAINERS b/MAINTAINERS
index 14bc707..3086d4b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -579,7 +579,7 @@
F: net/appletalk/
ARASAN COMPACT FLASH PATA CONTROLLER
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: linux-ide@vger.kernel.org
S: Maintained
F: include/linux/pata_arasan_cf_data.h
@@ -894,6 +894,14 @@
M: Philipp Zabel <philipp.zabel@gmail.com>
S: Maintained
+ARM/Marvell Armada 370 and Armada XP SOC support
+M: Jason Cooper <jason@lakedaemon.net>
+M: Andrew Lunn <andrew@lunn.ch>
+M: Gregory Clement <gregory.clement@free-electrons.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-mvebu/
+
ARM/Marvell Dove/Kirkwood/MV78xx0/Orion SOC support
M: Jason Cooper <jason@lakedaemon.net>
M: Andrew Lunn <andrew@lunn.ch>
@@ -1103,6 +1111,16 @@
F: arch/arm/mach-shmobile/
F: drivers/sh/
+ARM/SOCFPGA ARCHITECTURE
+M: Dinh Nguyen <dinguyen@altera.com>
+S: Maintained
+F: arch/arm/mach-socfpga/
+
+ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
+M: Dinh Nguyen <dinguyen@altera.com>
+S: Maintained
+F: drivers/clk/socfpga/
+
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1646,11 +1664,11 @@
F: drivers/gpio/gpio-bt8xx.c
BTRFS FILE SYSTEM
-M: Chris Mason <chris.mason@oracle.com>
+M: Chris Mason <chris.mason@fusionio.com>
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
Q: http://patchwork.kernel.org/project/linux-btrfs/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs.git
S: Maintained
F: Documentation/filesystems/btrfs.txt
F: fs/btrfs/
@@ -1800,6 +1818,9 @@
CFG80211 and NL80211
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
+W: http://wireless.kernel.org/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: include/linux/nl80211.h
F: include/net/cfg80211.h
@@ -3430,13 +3451,14 @@
F: drivers/idle/i7300_idle.c
IEEE 802.15.4 SUBSYSTEM
+M: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-M: Sergey Lapin <slapin@ossfans.org>
L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://apps.sourceforge.net/trac/linux-zigbee
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
S: Maintained
F: net/ieee802154/
+F: net/mac802154/
F: drivers/ieee802154/
IIO SUBSYSTEM AND DRIVERS
@@ -4349,7 +4371,8 @@
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: Documentation/networking/mac80211-injection.txt
F: include/net/mac80211.h
@@ -4360,7 +4383,8 @@
M: Mattias Nissler <mattias.nissler@gmx.de>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: net/mac80211/rc80211_pid*
@@ -4649,8 +4673,8 @@
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git
+T: git git://1984.lsi.us.es/nf
+T: git git://1984.lsi.us.es/nf-next
S: Supported
F: include/linux/netfilter*
F: include/linux/netfilter/
@@ -4852,6 +4876,7 @@
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/*omap*/*pm*
+F: drivers/cpufreq/omap-cpufreq.c
OMAP POWERDOMAIN/CLOCKDOMAIN SOC ADAPTATION LAYER SUPPORT
M: Rajendra Nayak <rnayak@ti.com>
@@ -5291,7 +5316,7 @@
F: drivers/pinctrl/
PIN CONTROLLER - ST SPEAR
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
@@ -5558,7 +5583,7 @@
F: drivers/net/ethernet/qlogic/qla3xxx.*
QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
-M: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
+M: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
M: Sony Chacko <sony.chacko@qlogic.com>
M: linux-driver@qlogic.com
L: netdev@vger.kernel.org
@@ -5566,7 +5591,6 @@
F: drivers/net/ethernet/qlogic/qlcnic/
QLOGIC QLGE 10Gb ETHERNET DRIVER
-M: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
M: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
M: Ron Mercer <ron.mercer@qlogic.com>
M: linux-driver@qlogic.com
@@ -5711,6 +5735,9 @@
RFKILL
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
+W: http://wireless.kernel.org/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: Documentation/rfkill.txt
F: net/rfkill/
@@ -5865,7 +5892,7 @@
F: drivers/tty/serial
SYNOPSYS DESIGNWARE DMAC DRIVER
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
S: Maintained
F: include/linux/dw_dmac.h
F: drivers/dma/dw_dmac_regs.h
@@ -5901,7 +5928,7 @@
M: Peter Zijlstra <peterz@infradead.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
S: Maintained
-F: kernel/sched*
+F: kernel/sched/
F: include/linux/sched.h
SCORE ARCHITECTURE
@@ -6013,7 +6040,7 @@
F: drivers/mmc/host/sdhci-s3c.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-mmc@vger.kernel.org
S: Maintained
@@ -6203,6 +6230,15 @@
F: include/linux/srcu*
F: kernel/srcu*
+SMACK SECURITY MODULE
+M: Casey Schaufler <casey@schaufler-ca.com>
+L: linux-security-module@vger.kernel.org
+W: http://schaufler-ca.com
+T: git git://git.gitorious.org/smack-next/kernel.git
+S: Maintained
+F: Documentation/security/Smack.txt
+F: security/smack/
+
SMC91x ETHERNET DRIVER
M: Nicolas Pitre <nico@fluxnic.net>
S: Odd Fixes
@@ -6369,7 +6405,7 @@
F: include/linux/compiler.h
SPEAR PLATFORM SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -6378,7 +6414,7 @@
F: arch/arm/plat-spear/
SPEAR13XX MACHINE SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -6387,7 +6423,7 @@
F: arch/arm/mach-spear13xx/
SPEAR3XX MACHINE SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -6398,7 +6434,7 @@
SPEAR6XX MACHINE SUPPORT
M: Rajeev Kumar <rajeev-dlh.kumar@st.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
@@ -6406,7 +6442,7 @@
F: arch/arm/mach-spear6xx/
SPEAR CLOCK FRAMEWORK SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
@@ -6835,10 +6871,11 @@
F: mm/shmem.c
TPM DEVICE DRIVER
-M: Debora Velarde <debora@linux.vnet.ibm.com>
-M: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
+M: Kent Yoder <key@linux.vnet.ibm.com>
+M: Rajiv Andrade <mail@srajiv.net>
W: http://tpmdd.sourceforge.net
-M: Marcel Selhorst <m.selhorst@sirrix.com>
+M: Marcel Selhorst <tpmdd@selhorst.net>
+M: Sirrix AG <tpmdd@sirrix.com>
W: http://www.sirrix.com
L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
@@ -7413,7 +7450,7 @@
VME SUBSYSTEM
M: Martyn Welch <martyn.welch@ge.com>
-M: Manohar Vanga <manohar.vanga@cern.ch>
+M: Manohar Vanga <manohar.vanga@gmail.com>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: devel@driverdev.osuosl.org
S: Maintained
diff --git a/Makefile b/Makefile
index d845c2a..4bb09e1 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 5
SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION =
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
@@ -561,6 +561,8 @@
KBUILD_CFLAGS += -O2
endif
+include $(srctree)/arch/$(SRCARCH)/Makefile
+
ifdef CONFIG_READABLE_ASM
# Disable optimizations that make assembler listings hard to read.
# reorder blocks reorders the control in the function
@@ -571,8 +573,6 @@
$(call cc-option,-fno-partial-inlining)
endif
-include $(srctree)/arch/$(SRCARCH)/Makefile
-
ifneq ($(CONFIG_FRAME_WARN),0)
KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
endif
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 84449dd..c7e6d20 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -250,6 +250,25 @@
prompt "ARM system type"
default ARCH_VERSATILE
+config ARCH_SOCFPGA
+ bool "Altera SOCFPGA family"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
+ select ARM_GIC
+ select CACHE_L2X0
+ select CLKDEV_LOOKUP
+ select COMMON_CLK
+ select CPU_V7
+ select DW_APB_TIMER
+ select DW_APB_TIMER_OF
+ select GENERIC_CLOCKEVENTS
+ select GPIO_PL061 if GPIOLIB
+ select HAVE_ARM_SCU
+ select SPARSE_IRQ
+ select USE_OF
+ help
+ This enables support for Altera SOCFPGA Cyclone V platform
+
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
@@ -260,6 +279,7 @@
select ICST
select GENERIC_CLOCKEVENTS
select PLAT_VERSATILE
+ select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_FPGA_IRQ
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
@@ -277,6 +297,7 @@
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
select PLAT_VERSATILE
+ select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_CLCD
select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB
@@ -293,7 +314,9 @@
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select NEED_MACH_IO_H if PCI
select PLAT_VERSATILE
+ select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_CLCD
select PLAT_VERSATILE_FPGA_IRQ
select ARM_TIMER_SP804
@@ -306,7 +329,7 @@
select ARM_AMBA
select ARM_TIMER_SP804
select CLKDEV_LOOKUP
- select HAVE_MACH_CLKDEV
+ select COMMON_CLK
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select HAVE_PATA_PLATFORM
@@ -314,6 +337,7 @@
select NO_IOPORT
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
This enables support for the ARM Ltd Versatile Express boards.
@@ -388,6 +412,7 @@
bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
select CPU_V7
select NO_IOPORT
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
@@ -446,6 +471,8 @@
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+ select USE_OF
help
Support for Freescale MXC/iMX-based family of processors
@@ -532,6 +559,18 @@
help
Support for Intel's IXP4XX (XScale) family of processors.
+config ARCH_MVEBU
+ bool "Marvell SOCs with Device Tree support"
+ select GENERIC_CLOCKEVENTS
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+ select CLKSRC_MMIO
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+ select COMMON_CLK
+ help
+ Support for the Marvell SoC Family with device tree support
+
config ARCH_DOVE
bool "Marvell Dove"
select CPU_V7
@@ -566,6 +605,7 @@
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
select USE_OF
+ select HAVE_PWM
help
Support for the NXP LPC32XX family of processors
@@ -588,6 +628,7 @@
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
+ select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the following Marvell Orion 5x series SoCs:
@@ -645,6 +686,7 @@
select MIGHT_HAVE_CACHE_L2X0
select NEED_MACH_IO_H if PCI
select ARCH_HAS_CPUFREQ
+ select USE_OF
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
@@ -656,6 +698,7 @@
select ARM_VIC
select CPU_V6K
select DW_APB_TIMER
+ select DW_APB_TIMER_OF
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_TCM
@@ -911,7 +954,7 @@
select ARM_AMBA
select ARM_VIC
select CPU_ARM926T
- select CLKDEV_LOOKUP
+ select COMMON_CLK
select GENERIC_CLOCKEVENTS
select PINCTRL
select MIGHT_HAVE_CACHE_L2X0
@@ -934,6 +977,7 @@
config ARCH_OMAP
bool "TI OMAP"
+ depends on MMU
select HAVE_CLK
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_CPUFREQ
@@ -985,6 +1029,8 @@
# Kconfigs may be included either alphabetically (according to the
# plat- suffix) or along side the corresponding mach-* source.
#
+source "arch/arm/mach-mvebu/Kconfig"
+
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-bcmring/Kconfig"
@@ -1019,8 +1065,6 @@
source "arch/arm/mach-ks8695/Kconfig"
-source "arch/arm/mach-lpc32xx/Kconfig"
-
source "arch/arm/mach-msm/Kconfig"
source "arch/arm/mach-mv78xx0/Kconfig"
@@ -1579,6 +1623,7 @@
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
default 355 if ARCH_U8500
default 264 if MACH_H4700
+ default 512 if SOC_OMAP5
default 0
help
Maximum number of GPIOs in the system.
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 01a1341..a03b5a7 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -310,6 +310,32 @@
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
+ config DEBUG_VEXPRESS_UART0_DETECT
+ bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
+ depends on ARCH_VEXPRESS && CPU_CP15_MMU
+ help
+ This option enables a simple heuristic which tries to determine
+ the motherboard's memory map variant (original or RS1) and then
+ choose the relevant UART0 base address.
+
+ Note that this will only work with standard A-class core tiles,
+ and may fail with non-standard SMM or custom software models.
+
+ config DEBUG_VEXPRESS_UART0_CA9
+ bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)"
+ depends on ARCH_VEXPRESS
+ help
+ This option selects UART0 at 0x10009000. Except for custom models,
+ this applies only to the V2P-CA9 tile.
+
+ config DEBUG_VEXPRESS_UART0_RS1
+ bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)"
+ depends on ARCH_VEXPRESS
+ help
+ This option selects UART0 at 0x1c090000. This applies to most
+ of the tiles using the RS1 memory map, including all new A-class
+ core tiles, FPGA-based SMMs and software models.
+
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 0298b00..4d6d311 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -157,6 +157,7 @@
machine-$(CONFIG_ARCH_IMX_V4_V5) := imx
machine-$(CONFIG_ARCH_IMX_V6_V7) := imx
machine-$(CONFIG_ARCH_MXS) := mxs
+machine-$(CONFIG_ARCH_MVEBU) := mvebu
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
machine-$(CONFIG_ARCH_OMAP1) := omap1
@@ -186,6 +187,7 @@
machine-$(CONFIG_ARCH_VT8500) := vt8500
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_FOOTBRIDGE) := footbridge
+machine-$(CONFIG_ARCH_SOCFPGA) := socfpga
machine-$(CONFIG_MACH_SPEAR1310) := spear13xx
machine-$(CONFIG_MACH_SPEAR1340) := spear13xx
machine-$(CONFIG_MACH_SPEAR300) := spear3xx
diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts
new file mode 100644
index 0000000..29b9f15
--- /dev/null
+++ b/arch/arm/boot/dts/aks-cdu.dts
@@ -0,0 +1,113 @@
+/*
+ * aks-cdu.dts - Device Tree file for AK signal CDU
+ *
+ * Copyright (C) 2012 AK signal Brno a.s.
+ * 2012 Jiri Prchal <jiri.prchal@aksignal.cz>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "ge863-pro3.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs";
+ };
+
+ ahb {
+ apb {
+ usart0: serial@fffb0000 {
+ status = "okay";
+ };
+
+ usart1: serial@fffb4000 {
+ status = "okay";
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-delay = <0 0>;
+ };
+
+ usart2: serial@fffb8000 {
+ status = "okay";
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-delay = <0 0>;
+ };
+
+ usart3: serial@fffd0000 {
+ status = "okay";
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-delay = <0 0>;
+ };
+
+ macb0: ethernet@fffc4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ usb1: gadget@fffa4000 {
+ atmel,vbus-gpio = <&pioC 15 0>;
+ status = "okay";
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ uboot@40000 {
+ label = "uboot";
+ reg = <0x40000 0x80000>;
+ };
+ ubootenv@c0000 {
+ label = "ubootenv";
+ reg = <0xc0000 0x40000>;
+ };
+ kernel@100000 {
+ label = "kernel";
+ reg = <0x100000 0x400000>;
+ };
+ rootfs@500000 {
+ label = "rootfs";
+ reg = <0x500000 0x7b00000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ red {
+ gpios = <&pioC 10 0>;
+ linux,default-trigger = "none";
+ };
+
+ green {
+ gpios = <&pioA 5 1>;
+ linux,default-trigger = "none";
+ default-state = "on";
+ };
+
+ yellow {
+ gpios = <&pioB 20 1>;
+ linux,default-trigger = "none";
+ };
+
+ blue {
+ gpios = <&pioB 21 1>;
+ linux,default-trigger = "none";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
new file mode 100644
index 0000000..a9af4db
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "am33xx.dtsi"
+
+/ {
+ model = "TI AM335x BeagleBone";
+ compatible = "ti,am335x-bone", "ti,am33xx";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
new file mode 100644
index 0000000..d6a97d9
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "am33xx.dtsi"
+
+/ {
+ model = "TI AM335x EVM";
+ compatible = "ti,am335x-evm", "ti,am33xx";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
new file mode 100644
index 0000000..59509c4
--- /dev/null
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -0,0 +1,158 @@
+/*
+ * Device Tree Source for AM33XX SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ti,am33xx";
+
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a8";
+ };
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is uses for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the AM33XX interconnect.
+ * The real AM33XX interconnect network is quite complex.Since
+ * that will not bring real advantage to represent that in DT
+ * for the moment, just use a fake OCP bus entry to represent
+ * the whole bus hierarchy.
+ */
+ ocp {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main";
+
+ intc: interrupt-controller@48200000 {
+ compatible = "ti,omap2-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ ti,intc-size = <128>;
+ reg = <0x48200000 0x1000>;
+ };
+
+ gpio1: gpio@44e07000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio1";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio@4804C000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio2";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio@481AC000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio3";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio4: gpio@481AE000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio4";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ uart1: serial@44E09000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart1";
+ clock-frequency = <48000000>;
+ };
+
+ uart2: serial@48022000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart2";
+ clock-frequency = <48000000>;
+ };
+
+ uart3: serial@48024000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart3";
+ clock-frequency = <48000000>;
+ };
+
+ uart4: serial@481A6000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart4";
+ clock-frequency = <48000000>;
+ };
+
+ uart5: serial@481A8000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart5";
+ clock-frequency = <48000000>;
+ };
+
+ uart6: serial@481AA000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart6";
+ clock-frequency = <48000000>;
+ };
+
+ i2c1: i2c@44E0B000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ };
+
+ i2c2: i2c@4802A000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c2";
+ };
+
+ i2c3: i2c@4819C000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c3";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
new file mode 100644
index 0000000..474f760
--- /dev/null
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+ model = "TI AM3517 EVM (AM3517/05)";
+ compatible = "ti,am3517-evm", "ti,omap3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+};
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
new file mode 100644
index 0000000..fffd5c2
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -0,0 +1,42 @@
+/*
+ * Device Tree file for Marvell Armada 370 evaluation board
+ * (DB-88F6710-BP-DDR3)
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "armada-370.dtsi"
+
+/ {
+ model = "Marvell Armada 370 Evaluation Board";
+ compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MB */
+ };
+
+ soc {
+ serial@d0012000 {
+ clock-frequency = <200000000>;
+ status = "okay";
+ };
+ timer@d0020300 {
+ clock-frequency = <600000000>;
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
new file mode 100644
index 0000000..6b6b932
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -0,0 +1,68 @@
+/*
+ * Device Tree Include file for Marvell Armada 370 and Armada XP SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Ben Dooks <ben.dooks@codethink.co.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common to the Armada
+ * 370 and Armada XP SoC.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Marvell Armada 370 and XP SoC";
+ compatible = "marvell,armada_370_xp";
+
+ cpus {
+ cpu@0 {
+ compatible = "marvell,sheeva-v7";
+ };
+ };
+
+ mpic: interrupt-controller@d0020000 {
+ compatible = "marvell,mpic";
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&mpic>;
+ ranges;
+
+ serial@d0012000 {
+ compatible = "ns16550";
+ reg = <0xd0012000 0x100>;
+ reg-shift = <2>;
+ interrupts = <41>;
+ status = "disabled";
+ };
+ serial@d0012100 {
+ compatible = "ns16550";
+ reg = <0xd0012100 0x100>;
+ reg-shift = <2>;
+ interrupts = <42>;
+ status = "disabled";
+ };
+
+ timer@d0020300 {
+ compatible = "marvell,armada-370-xp-timer";
+ reg = <0xd0020300 0x30>;
+ interrupts = <37>, <38>, <39>, <40>;
+ };
+ };
+};
+
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
new file mode 100644
index 0000000..3228ccc
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -0,0 +1,35 @@
+/*
+ * Device Tree Include file for Marvell Armada 370 family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada 370 SoC that are not
+ * common to all Armada SoCs.
+ */
+
+/include/ "armada-370-xp.dtsi"
+
+/ {
+ model = "Marvell Armada 370 family SoC";
+ compatible = "marvell,armada370", "marvell,armada-370-xp";
+
+ mpic: interrupt-controller@d0020000 {
+ reg = <0xd0020a00 0x1d0>,
+ <0xd0021870 0x58>;
+ };
+
+ soc {
+ system-controller@d0018200 {
+ compatible = "marvell,armada-370-xp-system-controller";
+ reg = <0xd0018200 0x100>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
new file mode 100644
index 0000000..f97040d
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -0,0 +1,50 @@
+/*
+ * Device Tree file for Marvell Armada XP evaluation board
+ * (DB-78460-BP)
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "armada-xp.dtsi"
+
+/ {
+ model = "Marvell Armada XP Evaluation Board";
+ compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000>; /* 2 GB */
+ };
+
+ soc {
+ serial@d0012000 {
+ clock-frequency = <250000000>;
+ status = "okay";
+ };
+ serial@d0012100 {
+ clock-frequency = <250000000>;
+ status = "okay";
+ };
+ serial@d0012200 {
+ clock-frequency = <250000000>;
+ status = "okay";
+ };
+ serial@d0012300 {
+ clock-frequency = <250000000>;
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
new file mode 100644
index 0000000..e1fa7e6
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -0,0 +1,55 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Ben Dooks <ben.dooks@codethink.co.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada 370 SoC that are not
+ * common to all Armada SoCs.
+ */
+
+/include/ "armada-370-xp.dtsi"
+
+/ {
+ model = "Marvell Armada XP family SoC";
+ compatible = "marvell,armadaxp", "marvell,armada-370-xp";
+
+ mpic: interrupt-controller@d0020000 {
+ reg = <0xd0020a00 0x1d0>,
+ <0xd0021870 0x58>;
+ };
+
+ soc {
+ serial@d0012200 {
+ compatible = "ns16550";
+ reg = <0xd0012200 0x100>;
+ reg-shift = <2>;
+ interrupts = <43>;
+ status = "disabled";
+ };
+ serial@d0012300 {
+ compatible = "ns16550";
+ reg = <0xd0012300 0x100>;
+ reg-shift = <2>;
+ interrupts = <44>;
+ status = "disabled";
+ };
+
+ timer@d0020300 {
+ marvell,timer-25Mhz;
+ };
+
+ system-controller@d0018200 {
+ compatible = "marvell,armada-370-xp-system-controller";
+ reg = <0xd0018200 0x500>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index f449efc..66389c1 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -52,10 +52,11 @@
ranges;
aic: interrupt-controller@fffff000 {
- #interrupt-cells = <2>;
+ #interrupt-cells = <3>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
+ atmel,external-irqs = <29 30 31>;
};
ramc0: ramc@ffffea00 {
@@ -81,25 +82,25 @@
pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
- interrupts = <1 4>;
+ interrupts = <1 4 7>;
};
tcb0: timer@fffa0000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffa0000 0x100>;
- interrupts = <17 4 18 4 19 4>;
+ interrupts = <17 4 0 18 4 0 19 4 0>;
};
tcb1: timer@fffdc000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffdc000 0x100>;
- interrupts = <26 4 27 4 28 4>;
+ interrupts = <26 4 0 27 4 0 28 4 0>;
};
pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x100>;
- interrupts = <2 4>;
+ interrupts = <2 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -108,7 +109,7 @@
pioB: gpio@fffff600 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x100>;
- interrupts = <3 4>;
+ interrupts = <3 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -117,7 +118,7 @@
pioC: gpio@fffff800 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x100>;
- interrupts = <4 4>;
+ interrupts = <4 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -126,14 +127,14 @@
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
- interrupts = <1 4>;
+ interrupts = <1 4 7>;
status = "disabled";
};
usart0: serial@fffb0000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffb0000 0x200>;
- interrupts = <6 4>;
+ interrupts = <6 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -142,7 +143,7 @@
usart1: serial@fffb4000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffb4000 0x200>;
- interrupts = <7 4>;
+ interrupts = <7 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -151,7 +152,7 @@
usart2: serial@fffb8000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffb8000 0x200>;
- interrupts = <8 4>;
+ interrupts = <8 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -160,7 +161,7 @@
usart3: serial@fffd0000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffd0000 0x200>;
- interrupts = <23 4>;
+ interrupts = <23 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -169,7 +170,7 @@
usart4: serial@fffd4000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffd4000 0x200>;
- interrupts = <24 4>;
+ interrupts = <24 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -178,7 +179,7 @@
usart5: serial@fffd8000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffd8000 0x200>;
- interrupts = <25 4>;
+ interrupts = <25 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -187,21 +188,21 @@
macb0: ethernet@fffc4000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffc4000 0x100>;
- interrupts = <21 4>;
+ interrupts = <21 4 3>;
status = "disabled";
};
usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc";
reg = <0xfffa4000 0x4000>;
- interrupts = <10 4>;
+ interrupts = <10 4 2>;
status = "disabled";
};
adc0: adc@fffe0000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xfffe0000 0x100>;
- interrupts = <5 4>;
+ interrupts = <5 4 0>;
atmel,adc-use-external-triggers;
atmel,adc-channels-used = <0xf>;
atmel,adc-vref = <3300>;
@@ -253,7 +254,7 @@
usb0: ohci@00500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
- interrupts = <20 4>;
+ interrupts = <20 4 2>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 0209913..b460d6c 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -48,10 +48,11 @@
ranges;
aic: interrupt-controller@fffff000 {
- #interrupt-cells = <2>;
+ #interrupt-cells = <3>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
+ atmel,external-irqs = <30 31>;
};
pmc: pmc@fffffc00 {
@@ -68,13 +69,13 @@
pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
- interrupts = <1 4>;
+ interrupts = <1 4 7>;
};
tcb0: timer@fff7c000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>;
- interrupts = <19 4>;
+ interrupts = <19 4 0>;
};
rstc@fffffd00 {
@@ -90,7 +91,7 @@
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x100>;
- interrupts = <2 4>;
+ interrupts = <2 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -99,7 +100,7 @@
pioB: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x100>;
- interrupts = <3 4>;
+ interrupts = <3 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -108,7 +109,7 @@
pioC: gpio@fffff600 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x100>;
- interrupts = <4 4>;
+ interrupts = <4 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -117,7 +118,7 @@
pioD: gpio@fffff800 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x100>;
- interrupts = <4 4>;
+ interrupts = <4 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -126,7 +127,7 @@
pioE: gpio@fffffa00 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x100>;
- interrupts = <4 4>;
+ interrupts = <4 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -135,14 +136,14 @@
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
- interrupts = <1 4>;
+ interrupts = <1 4 7>;
status = "disabled";
};
usart0: serial@fff8c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff8c000 0x200>;
- interrupts = <7 4>;
+ interrupts = <7 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -151,7 +152,7 @@
usart1: serial@fff90000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff90000 0x200>;
- interrupts = <8 4>;
+ interrupts = <8 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -160,7 +161,7 @@
usart2: serial@fff94000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff94000 0x200>;
- interrupts = <9 4>;
+ interrupts = <9 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -169,14 +170,14 @@
macb0: ethernet@fffbc000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>;
- interrupts = <21 4>;
+ interrupts = <21 4 3>;
status = "disabled";
};
usb1: gadget@fff78000 {
compatible = "atmel,at91rm9200-udc";
reg = <0xfff78000 0x4000>;
- interrupts = <24 4>;
+ interrupts = <24 4 2>;
status = "disabled";
};
};
@@ -200,7 +201,7 @@
usb0: ohci@00a00000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00a00000 0x100000>;
- interrupts = <29 4>;
+ interrupts = <29 4 2>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 7dbccaf..bafa880 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -53,10 +53,11 @@
ranges;
aic: interrupt-controller@fffff000 {
- #interrupt-cells = <2>;
+ #interrupt-cells = <3>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
+ atmel,external-irqs = <31>;
};
ramc0: ramc@ffffe400 {
@@ -78,7 +79,7 @@
pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
- interrupts = <1 4>;
+ interrupts = <1 4 7>;
};
@@ -90,25 +91,25 @@
tcb0: timer@fff7c000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>;
- interrupts = <18 4>;
+ interrupts = <18 4 0>;
};
tcb1: timer@fffd4000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffd4000 0x100>;
- interrupts = <18 4>;
+ interrupts = <18 4 0>;
};
dma: dma-controller@ffffec00 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
- interrupts = <21 4>;
+ interrupts = <21 4 0>;
};
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x100>;
- interrupts = <2 4>;
+ interrupts = <2 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -117,7 +118,7 @@
pioB: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x100>;
- interrupts = <3 4>;
+ interrupts = <3 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -126,7 +127,7 @@
pioC: gpio@fffff600 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x100>;
- interrupts = <4 4>;
+ interrupts = <4 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -135,7 +136,7 @@
pioD: gpio@fffff800 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x100>;
- interrupts = <5 4>;
+ interrupts = <5 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -144,7 +145,7 @@
pioE: gpio@fffffa00 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x100>;
- interrupts = <5 4>;
+ interrupts = <5 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -153,14 +154,14 @@
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
- interrupts = <1 4>;
+ interrupts = <1 4 7>;
status = "disabled";
};
usart0: serial@fff8c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff8c000 0x200>;
- interrupts = <7 4>;
+ interrupts = <7 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -169,7 +170,7 @@
usart1: serial@fff90000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff90000 0x200>;
- interrupts = <8 4>;
+ interrupts = <8 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -178,7 +179,7 @@
usart2: serial@fff94000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff94000 0x200>;
- interrupts = <9 4>;
+ interrupts = <9 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -187,7 +188,7 @@
usart3: serial@fff98000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff98000 0x200>;
- interrupts = <10 4>;
+ interrupts = <10 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -196,14 +197,14 @@
macb0: ethernet@fffbc000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>;
- interrupts = <25 4>;
+ interrupts = <25 4 3>;
status = "disabled";
};
adc0: adc@fffb0000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xfffb0000 0x100>;
- interrupts = <20 4>;
+ interrupts = <20 4 0>;
atmel,adc-use-external-triggers;
atmel,adc-channels-used = <0xff>;
atmel,adc-vref = <3300>;
@@ -257,14 +258,14 @@
usb0: ohci@00700000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00700000 0x100000>;
- interrupts = <22 4>;
+ interrupts = <22 4 2>;
status = "disabled";
};
usb1: ehci@00800000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
- interrupts = <22 4>;
+ interrupts = <22 4 2>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index cb84de7..bfac0df 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -50,7 +50,7 @@
ranges;
aic: interrupt-controller@fffff000 {
- #interrupt-cells = <2>;
+ #interrupt-cells = <3>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
@@ -74,7 +74,7 @@
pit: timer@fffffe30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
- interrupts = <1 4>;
+ interrupts = <1 4 7>;
};
shdwc@fffffe10 {
@@ -85,25 +85,25 @@
tcb0: timer@f8008000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8008000 0x100>;
- interrupts = <17 4>;
+ interrupts = <17 4 0>;
};
tcb1: timer@f800c000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf800c000 0x100>;
- interrupts = <17 4>;
+ interrupts = <17 4 0>;
};
dma: dma-controller@ffffec00 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
- interrupts = <20 4>;
+ interrupts = <20 4 0>;
};
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x100>;
- interrupts = <2 4>;
+ interrupts = <2 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -112,7 +112,7 @@
pioB: gpio@fffff600 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x100>;
- interrupts = <2 4>;
+ interrupts = <2 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -121,7 +121,7 @@
pioC: gpio@fffff800 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x100>;
- interrupts = <3 4>;
+ interrupts = <3 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -130,7 +130,7 @@
pioD: gpio@fffffa00 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x100>;
- interrupts = <3 4>;
+ interrupts = <3 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -139,14 +139,14 @@
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
- interrupts = <1 4>;
+ interrupts = <1 4 7>;
status = "disabled";
};
usart0: serial@f801c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x4000>;
- interrupts = <5 4>;
+ interrupts = <5 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -155,7 +155,7 @@
usart1: serial@f8020000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8020000 0x4000>;
- interrupts = <6 4>;
+ interrupts = <6 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -164,7 +164,7 @@
usart2: serial@f8024000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8024000 0x4000>;
- interrupts = <7 4>;
+ interrupts = <7 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -173,7 +173,7 @@
usart3: serial@f8028000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8028000 0x4000>;
- interrupts = <8 4>;
+ interrupts = <8 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -201,7 +201,7 @@
usb0: ohci@00500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x00100000>;
- interrupts = <22 4>;
+ interrupts = <22 4 2>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 6b3ef43..4a18c39 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -51,10 +51,11 @@
ranges;
aic: interrupt-controller@fffff000 {
- #interrupt-cells = <2>;
+ #interrupt-cells = <3>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
+ atmel,external-irqs = <31>;
};
ramc0: ramc@ffffe800 {
@@ -80,37 +81,37 @@
pit: timer@fffffe30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
- interrupts = <1 4>;
+ interrupts = <1 4 7>;
};
tcb0: timer@f8008000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8008000 0x100>;
- interrupts = <17 4>;
+ interrupts = <17 4 0>;
};
tcb1: timer@f800c000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf800c000 0x100>;
- interrupts = <17 4>;
+ interrupts = <17 4 0>;
};
dma0: dma-controller@ffffec00 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
- interrupts = <20 4>;
+ interrupts = <20 4 0>;
};
dma1: dma-controller@ffffee00 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffee00 0x200>;
- interrupts = <21 4>;
+ interrupts = <21 4 0>;
};
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x100>;
- interrupts = <2 4>;
+ interrupts = <2 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -119,7 +120,7 @@
pioB: gpio@fffff600 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x100>;
- interrupts = <2 4>;
+ interrupts = <2 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -128,7 +129,7 @@
pioC: gpio@fffff800 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x100>;
- interrupts = <3 4>;
+ interrupts = <3 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -137,7 +138,7 @@
pioD: gpio@fffffa00 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x100>;
- interrupts = <3 4>;
+ interrupts = <3 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -146,14 +147,14 @@
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
- interrupts = <1 4>;
+ interrupts = <1 4 7>;
status = "disabled";
};
usart0: serial@f801c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x200>;
- interrupts = <5 4>;
+ interrupts = <5 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -162,7 +163,7 @@
usart1: serial@f8020000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8020000 0x200>;
- interrupts = <6 4>;
+ interrupts = <6 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -171,7 +172,7 @@
usart2: serial@f8024000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8024000 0x200>;
- interrupts = <7 4>;
+ interrupts = <7 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@@ -180,21 +181,21 @@
macb0: ethernet@f802c000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xf802c000 0x100>;
- interrupts = <24 4>;
+ interrupts = <24 4 3>;
status = "disabled";
};
macb1: ethernet@f8030000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xf8030000 0x100>;
- interrupts = <27 4>;
+ interrupts = <27 4 3>;
status = "disabled";
};
adc0: adc@f804c000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xf804c000 0x100>;
- interrupts = <19 4>;
+ interrupts = <19 4 0>;
atmel,adc-use-external;
atmel,adc-channels-used = <0xffff>;
atmel,adc-vref = <3300>;
@@ -248,14 +249,14 @@
usb0: ohci@00600000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
- interrupts = <22 4>;
+ interrupts = <22 4 2>;
status = "disabled";
};
usb1: ehci@00700000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
- interrupts = <22 4>;
+ interrupts = <22 4 2>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi
index 4ad5160..3180a9c 100644
--- a/arch/arm/boot/dts/db8500.dtsi
+++ b/arch/arm/boot/dts/db8500.dtsi
@@ -48,7 +48,7 @@
};
rtc@80154000 {
- compatible = "stericsson,db8500-rtc";
+ compatible = "arm,rtc-pl031", "arm,primecell";
reg = <0x80154000 0x1000>;
interrupts = <0 18 0x4>;
};
@@ -60,7 +60,7 @@
interrupts = <0 119 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
- supports-sleepmode;
+ st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <0>;
@@ -73,7 +73,7 @@
interrupts = <0 120 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
- supports-sleepmode;
+ st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <1>;
@@ -86,7 +86,7 @@
interrupts = <0 121 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
- supports-sleepmode;
+ st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <2>;
@@ -99,7 +99,7 @@
interrupts = <0 122 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
- supports-sleepmode;
+ st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <3>;
@@ -112,7 +112,7 @@
interrupts = <0 123 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
- supports-sleepmode;
+ st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <4>;
@@ -125,7 +125,7 @@
interrupts = <0 124 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
- supports-sleepmode;
+ st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <5>;
@@ -138,7 +138,7 @@
interrupts = <0 125 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
- supports-sleepmode;
+ st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <6>;
@@ -151,7 +151,7 @@
interrupts = <0 126 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
- supports-sleepmode;
+ st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <7>;
@@ -164,7 +164,7 @@
interrupts = <0 127 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
- supports-sleepmode;
+ st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <8>;
@@ -206,62 +206,74 @@
// DB8500_REGULATOR_VAPE
db8500_vape_reg: db8500_vape {
+ regulator-compatible = "db8500_vape";
regulator-name = "db8500-vape";
regulator-always-on;
};
// DB8500_REGULATOR_VARM
db8500_varm_reg: db8500_varm {
+ regulator-compatible = "db8500_varm";
regulator-name = "db8500-varm";
};
// DB8500_REGULATOR_VMODEM
db8500_vmodem_reg: db8500_vmodem {
+ regulator-compatible = "db8500_vmodem";
regulator-name = "db8500-vmodem";
};
// DB8500_REGULATOR_VPLL
db8500_vpll_reg: db8500_vpll {
+ regulator-compatible = "db8500_vpll";
regulator-name = "db8500-vpll";
};
// DB8500_REGULATOR_VSMPS1
db8500_vsmps1_reg: db8500_vsmps1 {
+ regulator-compatible = "db8500_vsmps1";
regulator-name = "db8500-vsmps1";
};
// DB8500_REGULATOR_VSMPS2
db8500_vsmps2_reg: db8500_vsmps2 {
+ regulator-compatible = "db8500_vsmps2";
regulator-name = "db8500-vsmps2";
};
// DB8500_REGULATOR_VSMPS3
db8500_vsmps3_reg: db8500_vsmps3 {
+ regulator-compatible = "db8500_vsmps3";
regulator-name = "db8500-vsmps3";
};
// DB8500_REGULATOR_VRF1
db8500_vrf1_reg: db8500_vrf1 {
+ regulator-compatible = "db8500_vrf1";
regulator-name = "db8500-vrf1";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSP
db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+ regulator-compatible = "db8500_sva_mmdsp";
regulator-name = "db8500-sva-mmdsp";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+ regulator-compatible = "db8500_sva_mmdsp_ret";
regulator-name = "db8500-sva-mmdsp-ret";
};
// DB8500_REGULATOR_SWITCH_SVAPIPE
db8500_sva_pipe_reg: db8500_sva_pipe {
+ regulator-compatible = "db8500_sva_pipe";
regulator-name = "db8500_sva_pipe";
};
// DB8500_REGULATOR_SWITCH_SIAMMDSP
db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+ regulator-compatible = "db8500_sia_mmdsp";
regulator-name = "db8500_sia_mmdsp";
};
@@ -272,38 +284,45 @@
// DB8500_REGULATOR_SWITCH_SIAPIPE
db8500_sia_pipe_reg: db8500_sia_pipe {
+ regulator-compatible = "db8500_sia_pipe";
regulator-name = "db8500-sia-pipe";
};
// DB8500_REGULATOR_SWITCH_SGA
db8500_sga_reg: db8500_sga {
+ regulator-compatible = "db8500_sga";
regulator-name = "db8500-sga";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_B2R2_MCDE
db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+ regulator-compatible = "db8500_b2r2_mcde";
regulator-name = "db8500-b2r2-mcde";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_ESRAM12
db8500_esram12_reg: db8500_esram12 {
+ regulator-compatible = "db8500_esram12";
regulator-name = "db8500-esram12";
};
// DB8500_REGULATOR_SWITCH_ESRAM12RET
db8500_esram12_ret_reg: db8500_esram12_ret {
+ regulator-compatible = "db8500_esram12_ret";
regulator-name = "db8500-esram12-ret";
};
// DB8500_REGULATOR_SWITCH_ESRAM34
db8500_esram34_reg: db8500_esram34 {
+ regulator-compatible = "db8500_esram34";
regulator-name = "db8500-esram34";
};
// DB8500_REGULATOR_SWITCH_ESRAM34RET
db8500_esram34_ret_reg: db8500_esram34_ret {
+ regulator-compatible = "db8500_esram34_ret";
regulator-name = "db8500-esram34-ret";
};
};
@@ -312,12 +331,70 @@
compatible = "stericsson,ab8500";
reg = <5>; /* mailbox 5 is i2c */
interrupts = <0 40 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ab8500-rtc {
+ compatible = "stericsson,ab8500-rtc";
+ interrupts = <17 0x4
+ 18 0x4>;
+ interrupt-names = "60S", "ALARM";
+ };
+
+ ab8500-gpadc {
+ compatible = "stericsson,ab8500-gpadc";
+ interrupts = <32 0x4
+ 39 0x4>;
+ interrupt-names = "HW_CONV_END", "SW_CONV_END";
+ vddadc-supply = <&ab8500_ldo_tvout_reg>;
+ };
+
+ ab8500-usb {
+ compatible = "stericsson,ab8500-usb";
+ interrupts = < 90 0x4
+ 96 0x4
+ 14 0x4
+ 15 0x4
+ 79 0x4
+ 74 0x4
+ 75 0x4>;
+ interrupt-names = "ID_WAKEUP_R",
+ "ID_WAKEUP_F",
+ "VBUS_DET_F",
+ "VBUS_DET_R",
+ "USB_LINK_STATUS",
+ "USB_ADP_PROBE_PLUG",
+ "USB_ADP_PROBE_UNPLUG";
+ vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
+ v-ape-supply = <&db8500_vape_reg>;
+ musb_1v8-supply = <&db8500_vsmps2_reg>;
+ };
+
+ ab8500-ponkey {
+ compatible = "stericsson,ab8500-ponkey";
+ interrupts = <6 0x4
+ 7 0x4>;
+ interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+ };
+
+ ab8500-sysctrl {
+ compatible = "stericsson,ab8500-sysctrl";
+ };
+
+ ab8500-pwm {
+ compatible = "stericsson,ab8500-pwm";
+ };
+
+ ab8500-debugfs {
+ compatible = "stericsson,ab8500-debug";
+ };
ab8500-regulators {
compatible = "stericsson,ab8500-regulator";
// supplies to the display/camera
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ regulator-compatible = "ab8500_ldo_aux1";
regulator-name = "V-DISPLAY";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2900000>;
@@ -328,6 +405,7 @@
// supplies to the on-board eMMC
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+ regulator-compatible = "ab8500_ldo_aux2";
regulator-name = "V-eMMC1";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
@@ -335,6 +413,7 @@
// supply for VAUX3; SDcard slots
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+ regulator-compatible = "ab8500_ldo_aux3";
regulator-name = "V-MMC-SD";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
@@ -342,41 +421,49 @@
// supply for v-intcore12; VINTCORE12 LDO
ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+ regulator-compatible = "ab8500_ldo_initcore";
regulator-name = "V-INTCORE";
};
// supply for tvout; gpadc; TVOUT LDO
ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+ regulator-compatible = "ab8500_ldo_tvout";
regulator-name = "V-TVOUT";
};
// supply for ab8500-usb; USB LDO
ab8500_ldo_usb_reg: ab8500_ldo_usb {
+ regulator-compatible = "ab8500_ldo_usb";
regulator-name = "dummy";
};
// supply for ab8500-vaudio; VAUDIO LDO
ab8500_ldo_audio_reg: ab8500_ldo_audio {
+ regulator-compatible = "ab8500_ldo_audio";
regulator-name = "V-AUD";
};
// supply for v-anamic1 VAMic1-LDO
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+ regulator-compatible = "ab8500_ldo_anamic1";
regulator-name = "V-AMIC1";
};
// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+ regulator-compatible = "ab8500_ldo_amamic2";
regulator-name = "V-AMIC2";
};
// supply for v-dmic; VDMIC LDO
ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+ regulator-compatible = "ab8500_ldo_dmic";
regulator-name = "V-DMIC";
};
// supply for U8500 CSI/DSI; VANA LDO
ab8500_ldo_ana_reg: ab8500_ldo_ana {
+ regulator-compatible = "ab8500_ldo_ana";
regulator-name = "V-CSI/DSI";
};
};
diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/ea3250.dts
new file mode 100644
index 0000000..d79b28d
--- /dev/null
+++ b/arch/arm/boot/dts/ea3250.dts
@@ -0,0 +1,174 @@
+/*
+ * Embedded Artists LPC3250 board
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "lpc32xx.dtsi"
+
+/ {
+ model = "Embedded Artists LPC3250 board based on NXP LPC3250";
+ compatible = "ea,ea3250", "nxp,lpc3250";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x4000000>;
+ };
+
+ ahb {
+ mac: ethernet@31060000 {
+ phy-mode = "rmii";
+ use-iram;
+ };
+
+ /* Here, choose exactly one from: ohci, usbd */
+ ohci@31020000 {
+ transceiver = <&isp1301>;
+ status = "okay";
+ };
+
+/*
+ usbd@31020000 {
+ transceiver = <&isp1301>;
+ status = "okay";
+ };
+*/
+
+ /* 128MB Flash via SLC NAND controller */
+ slc: flash@20020000 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nxp,wdr-clks = <14>;
+ nxp,wwidth = <260000000>;
+ nxp,whold = <104000000>;
+ nxp,wsetup = <200000000>;
+ nxp,rdr-clks = <14>;
+ nxp,rwidth = <34666666>;
+ nxp,rhold = <104000000>;
+ nxp,rsetup = <200000000>;
+ nand-on-flash-bbt;
+ gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+ mtd0@00000000 {
+ label = "ea3250-boot";
+ reg = <0x00000000 0x00080000>;
+ read-only;
+ };
+
+ mtd1@00080000 {
+ label = "ea3250-uboot";
+ reg = <0x00080000 0x000c0000>;
+ read-only;
+ };
+
+ mtd2@00140000 {
+ label = "ea3250-kernel";
+ reg = <0x00140000 0x00400000>;
+ };
+
+ mtd3@00540000 {
+ label = "ea3250-rootfs";
+ reg = <0x00540000 0x07ac0000>;
+ };
+ };
+
+ apb {
+ uart5: serial@40090000 {
+ status = "okay";
+ };
+
+ uart3: serial@40080000 {
+ status = "okay";
+ };
+
+ uart6: serial@40098000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@400A0000 {
+ clock-frequency = <100000>;
+
+ eeprom@50 {
+ compatible = "at,24c256";
+ reg = <0x50>;
+ };
+
+ eeprom@57 {
+ compatible = "at,24c64";
+ reg = <0x57>;
+ };
+
+ uda1380: uda1380@18 {
+ compatible = "nxp,uda1380";
+ reg = <0x18>;
+ power-gpio = <&gpio 0x59 0>;
+ reset-gpio = <&gpio 0x51 0>;
+ dac-clk = "wspll";
+ };
+
+ pca9532: pca9532@60 {
+ compatible = "nxp,pca9532";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x60>;
+ };
+ };
+
+ i2c2: i2c@400A8000 {
+ clock-frequency = <100000>;
+ };
+
+ i2cusb: i2c@31020300 {
+ clock-frequency = <100000>;
+
+ isp1301: usb-transceiver@2d {
+ compatible = "nxp,isp1301";
+ reg = <0x2d>;
+ };
+ };
+
+ sd@20098000 {
+ wp-gpios = <&pca9532 5 0>;
+ cd-gpios = <&pca9532 4 0>;
+ cd-inverted;
+ bus-width = <4>;
+ status = "okay";
+ };
+ };
+
+ fab {
+ uart1: serial@40014000 {
+ status = "okay";
+ };
+
+ /* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
+ adc@40048000 {
+ status = "okay";
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ button@21 {
+ label = "GPIO Key UP";
+ linux,code = <103>;
+ gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts
new file mode 100644
index 0000000..b7354e6
--- /dev/null
+++ b/arch/arm/boot/dts/evk-pro3.dts
@@ -0,0 +1,41 @@
+/*
+ * evk-pro3.dts - Device Tree file for Telit EVK-PRO3 with Telit GE863-PRO3
+ *
+ * Copyright (C) 2012 Telit,
+ * 2012 Fabio Porcedda <fabio.porcedda@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "ge863-pro3.dtsi"
+
+/ {
+ model = "Telit EVK-PRO3 for Telit GE863-PRO3";
+ compatible = "telit,evk-pro3", "atmel,at91sam9260", "atmel,at91sam9";
+
+ ahb {
+ apb {
+ macb0: ethernet@fffc4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ usb1: gadget@fffa4000 {
+ atmel,vbus-gpio = <&pioC 5 0>;
+ status = "okay";
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+ };
+
+ i2c@0 {
+ status = "okay";
+ };
+
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index b8c4763..0c49caa 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -134,4 +134,16 @@
i2c@138D0000 {
status = "disabled";
};
+
+ spi_0: spi@13920000 {
+ status = "disabled";
+ };
+
+ spi_1: spi@13930000 {
+ status = "disabled";
+ };
+
+ spi_2: spi@13940000 {
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 27afc8e..1beccc8 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -179,4 +179,42 @@
i2c@138D0000 {
status = "disabled";
};
+
+ spi_0: spi@13920000 {
+ status = "disabled";
+ };
+
+ spi_1: spi@13930000 {
+ status = "disabled";
+ };
+
+ spi_2: spi@13940000 {
+ gpios = <&gpc1 1 5 3 0>,
+ <&gpc1 3 5 3 0>,
+ <&gpc1 4 5 3 0>;
+
+ w25x80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25x80";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+
+ controller-data {
+ cs-gpio = <&gpc1 2 1 0 3>;
+ samsung,spi-feedback-delay = <0>;
+ };
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0xc0000>;
+ };
+ };
+ };
};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index a1dd2ee..02891fe 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -25,6 +25,12 @@
compatible = "samsung,exynos4210";
interrupt-parent = <&gic>;
+ aliases {
+ spi0 = &spi_0;
+ spi1 = &spi_1;
+ spi2 = &spi_2;
+ };
+
gic:interrupt-controller@10490000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
@@ -33,6 +39,17 @@
reg = <0x10490000 0x1000>, <0x10480000 0x100>;
};
+ combiner:interrupt-controller@10440000 {
+ compatible = "samsung,exynos4210-combiner";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0x10440000 0x1000>;
+ interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+ <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+ <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+ <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+ };
+
watchdog@10060000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
@@ -147,6 +164,36 @@
interrupts = <0 65 0>;
};
+ spi_0: spi@13920000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x13920000 0x100>;
+ interrupts = <0 66 0>;
+ tx-dma-channel = <&pdma0 7>; /* preliminary */
+ rx-dma-channel = <&pdma0 6>; /* preliminary */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi_1: spi@13930000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x13930000 0x100>;
+ interrupts = <0 67 0>;
+ tx-dma-channel = <&pdma1 7>; /* preliminary */
+ rx-dma-channel = <&pdma1 6>; /* preliminary */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi_2: spi@13940000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x13940000 0x100>;
+ interrupts = <0 68 0>;
+ tx-dma-channel = <&pdma0 9>; /* preliminary */
+ rx-dma-channel = <&pdma0 8>; /* preliminary */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
amba {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 49945cc..8a5e348 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -71,4 +71,42 @@
i2c@12CD0000 {
status = "disabled";
};
+
+ spi_0: spi@12d20000 {
+ status = "disabled";
+ };
+
+ spi_1: spi@12d30000 {
+ gpios = <&gpa2 4 2 3 0>,
+ <&gpa2 6 2 3 0>,
+ <&gpa2 7 2 3 0>;
+
+ w25q80bw@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25x80";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+
+ controller-data {
+ cs-gpio = <&gpa2 5 1 0 3>;
+ samsung,spi-feedback-delay = <0>;
+ };
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0xc0000>;
+ };
+ };
+ };
+
+ spi_2: spi@12d40000 {
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 4272b29..004aaa8 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -23,6 +23,12 @@
compatible = "samsung,exynos5250";
interrupt-parent = <&gic>;
+ aliases {
+ spi0 = &spi_0;
+ spi1 = &spi_1;
+ spi2 = &spi_2;
+ };
+
gic:interrupt-controller@10481000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
@@ -146,6 +152,36 @@
#size-cells = <0>;
};
+ spi_0: spi@12d20000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x12d20000 0x100>;
+ interrupts = <0 66 0>;
+ tx-dma-channel = <&pdma0 5>; /* preliminary */
+ rx-dma-channel = <&pdma0 4>; /* preliminary */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi_1: spi@12d30000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x12d30000 0x100>;
+ interrupts = <0 67 0>;
+ tx-dma-channel = <&pdma1 5>; /* preliminary */
+ rx-dma-channel = <&pdma1 4>; /* preliminary */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi_2: spi@12d40000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x12d40000 0x100>;
+ interrupts = <0 68 0>;
+ tx-dma-channel = <&pdma0 7>; /* preliminary */
+ rx-dma-channel = <&pdma0 6>; /* preliminary */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
amba {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi
new file mode 100644
index 0000000..17136fc
--- /dev/null
+++ b/arch/arm/boot/dts/ge863-pro3.dtsi
@@ -0,0 +1,52 @@
+/*
+ * ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3
+ *
+ * Copyright (C) 2012 Telit,
+ * 2012 Fabio Porcedda <fabio.porcedda@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "at91sam9260.dtsi"
+
+/ {
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <6000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ boot@0 {
+ label = "boot";
+ reg = <0x0 0x7c0000>;
+ };
+
+ root@07c0000 {
+ label = "root";
+ reg = <0x7c0000 0x7840000>;
+ };
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs";
+ };
+};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 70bffa9..e3486f4 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -22,17 +22,60 @@
apb@80000000 {
apbh@80000000 {
+ gpmi-nand@8000c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
+ status = "okay";
+ };
+
ssp0: ssp@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_8bit_pins_a &mmc0_pins_fixup>;
- bus-width = <8>;
+ pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+ bus-width = <4>;
wp-gpios = <&gpio1 30 0>;
+ vmmc-supply = <®_vddio_sd0>;
+ status = "okay";
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog-gpios@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
+ 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
+ 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ lcdif@80030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_24bit_pins_a>;
+ panel-enable-gpios = <&gpio1 18 0>;
status = "okay";
};
};
apbx@80040000 {
+ pwm: pwm@80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pins_a>;
+ status = "okay";
+ };
+
+ auart0: serial@8006c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart0_pins_a>;
+ status = "okay";
+ };
+
duart: serial@80070000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
@@ -40,4 +83,23 @@
};
};
};
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_vddio_sd0: vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 29 0>;
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 2 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
};
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
new file mode 100644
index 0000000..20912b1
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx23.dtsi"
+
+/ {
+ model = "i.MX23 Olinuxino Low Cost Board";
+ compatible = "olimex,imx23-olinuxino", "fsl,imx23";
+
+ memory {
+ reg = <0x40000000 0x04000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx23-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+ bus-width = <4>;
+ status = "okay";
+ };
+ };
+
+ apbx@80040000 {
+ duart: serial@80070000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
new file mode 100644
index 0000000..757a327f
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx23.dtsi"
+
+/ {
+ model = "Freescale STMP378x Development Board";
+ compatible = "fsl,stmp378x-devb", "fsl,imx23";
+
+ memory {
+ reg = <0x40000000 0x04000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx23-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+ bus-width = <4>;
+ wp-gpios = <&gpio1 30 0>;
+ vmmc-supply = <®_vddio_sd0>;
+ status = "okay";
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog-gpios@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
+ 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+ };
+
+ apbx@80040000 {
+ auart0: serial@8006c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart0_pins_a>;
+ status = "okay";
+ };
+
+ duart: serial@80070000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_vddio_sd0: vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 29 0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 8c5f999..a874dbf 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -18,6 +18,8 @@
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
+ serial0 = &auart0;
+ serial1 = &auart1;
};
cpus {
@@ -57,13 +59,15 @@
status = "disabled";
};
- bch@8000a000 {
- reg = <0x8000a000 2000>;
- status = "disabled";
- };
-
- gpmi@8000c000 {
- reg = <0x8000c000 2000>;
+ gpmi-nand@8000c000 {
+ compatible = "fsl,imx23-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x8000c000 2000>, <0x8000a000 2000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <13>, <56>;
+ interrupt-names = "gpmi-dma", "bch";
+ fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
@@ -114,24 +118,151 @@
duart_pins_a: duart@0 {
reg = <0>;
- fsl,pinmux-ids = <0x11a2 0x11b2>;
+ fsl,pinmux-ids = <
+ 0x11a2 /* MX23_PAD_PWM0__DUART_RX */
+ 0x11b2 /* MX23_PAD_PWM1__DUART_TX */
+ >;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
+ auart0_pins_a: auart0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */
+ 0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */
+ 0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */
+ 0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ gpmi_pins_a: gpmi-nand@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */
+ 0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */
+ 0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */
+ 0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */
+ 0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */
+ 0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */
+ 0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */
+ 0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */
+ 0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */
+ 0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */
+ 0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */
+ 0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */
+ 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
+ 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
+ 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
+ 0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */
+ 0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ gpmi_pins_fixup: gpmi-pins-fixup {
+ fsl,pinmux-ids = <
+ 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
+ 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
+ 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
+ >;
+ fsl,drive-strength = <2>;
+ };
+
+ mmc0_4bit_pins_a: mmc0-4bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
+ 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
+ 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
+ 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
+ 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
+ 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
+ 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
mmc0_8bit_pins_a: mmc0-8bit@0 {
reg = <0>;
- fsl,pinmux-ids = <0x2020 0x2030 0x2040
- 0x2050 0x0082 0x0092 0x00a2
- 0x00b2 0x2000 0x2010 0x2060>;
+ fsl,pinmux-ids = <
+ 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
+ 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
+ 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
+ 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
+ 0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */
+ 0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */
+ 0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */
+ 0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */
+ 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
+ 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
+ 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+ >;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mmc0_pins_fixup: mmc0-pins-fixup {
- fsl,pinmux-ids = <0x2010 0x2060>;
+ fsl,pinmux-ids = <
+ 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
+ 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+ >;
+ fsl,pull-up = <0>;
+ };
+
+ pwm2_pins_a: pwm2@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x11c0 /* MX23_PAD_PWM2__PWM2 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ lcdif_24bit_pins_a: lcdif-24bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */
+ 0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */
+ 0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */
+ 0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */
+ 0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */
+ 0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */
+ 0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */
+ 0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */
+ 0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */
+ 0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */
+ 0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */
+ 0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */
+ 0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */
+ 0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */
+ 0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */
+ 0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */
+ 0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */
+ 0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */
+ 0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */
+ 0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */
+ 0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */
+ 0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */
+ 0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */
+ 0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */
+ 0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */
+ 0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */
+ 0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */
+ 0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
@@ -172,7 +303,9 @@
};
lcdif@80030000 {
+ compatible = "fsl,imx23-lcdif";
reg = <0x80030000 2000>;
+ interrupts = <46 45>;
status = "disabled";
};
@@ -242,12 +375,16 @@
};
rtc@8005c000 {
+ compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
reg = <0x8005c000 2000>;
- status = "disabled";
+ interrupts = <22>;
};
- pwm@80064000 {
+ pwm: pwm@80064000 {
+ compatible = "fsl,imx23-pwm";
reg = <0x80064000 2000>;
+ #pwm-cells = <2>;
+ fsl,pwm-number = <5>;
status = "disabled";
};
@@ -257,12 +394,16 @@
};
auart0: serial@8006c000 {
+ compatible = "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
+ interrupts = <24 25 23>;
status = "disabled";
};
auart1: serial@8006e000 {
+ compatible = "fsl,imx23-auart";
reg = <0x8006e000 0x2000>;
+ interrupts = <59 60 58>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts
new file mode 100644
index 0000000..d3f8296
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-3ds.dts
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx27.dtsi"
+
+/ {
+ model = "mx27_3ds";
+ compatible = "freescale,imx27-3ds", "fsl,imx27";
+
+ memory {
+ reg = <0x0 0x0>;
+ };
+
+ soc {
+ aipi@10000000 { /* aipi */
+
+ wdog@10002000 {
+ status = "okay";
+ };
+
+ uart@1000a000 {
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
+ fec@1002b000 {
+ status = "okay";
+ };
+ };
+ };
+
+};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 386c769..00bae3a 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -121,7 +121,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio@10015100 {
@@ -131,7 +131,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio@10015200 {
@@ -141,7 +141,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio@10015300 {
@@ -151,7 +151,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio5: gpio@10015400 {
@@ -161,7 +161,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio@10015500 {
@@ -171,7 +171,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
cspi3: cspi@10017000 {
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
new file mode 100644
index 0000000..b383417
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -0,0 +1,198 @@
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+ model = "Bluegiga APX4 Development Kit";
+ compatible = "bluegiga,apx4devkit", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x04000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ gpmi-nand@8000c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+ status = "okay";
+ };
+
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
+ bus-width = <4>;
+ status = "okay";
+ };
+
+ ssp2: ssp@80014000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
+ bus-width = <4>;
+ status = "okay";
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog-gpios@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
+ 0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */
+ 0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */
+ 0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */
+ 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
+ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+ 0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ lcdif_pins_apx4: lcdif-apx4@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+ 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+ 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+ 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */
+ 0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */
+ 0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */
+ 0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
+ 0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */
+ 0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
+ fsl,pinmux-ids = <
+ 0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
+ >;
+ fsl,drive-strength = <2>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ lcdif@80030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_24bit_pins_a
+ &lcdif_pins_apx4>;
+ status = "okay";
+ };
+ };
+
+ apbx@80040000 {
+ saif0: saif@80042000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&saif0_pins_a>;
+ status = "okay";
+ };
+
+ saif1: saif@80046000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&saif1_pins_a>;
+ fsl,saif-master = <&saif0>;
+ status = "okay";
+ };
+
+ i2c0: i2c@80058000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+
+ };
+
+ pcf8563: rtc@51 {
+ compatible = "phg,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ duart: serial@80074000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+
+ auart0: serial@8006a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart0_pins_a>;
+ status = "okay";
+ };
+
+ auart1: serial@8006c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart1_2pins_a>;
+ status = "okay";
+ };
+
+ auart2: serial@8006e000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart2_2pins_a>;
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+
+ sound {
+ compatible = "bluegiga,apx4devkit-sgtl5000",
+ "fsl,mxs-audio-sgtl5000";
+ model = "apx4devkit-sgtl5000";
+ saif-controllers = <&saif0 &saif1>;
+ audio-codec = <&sgtl5000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user {
+ label = "Heartbeat";
+ gpios = <&gpio3 28 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
new file mode 100644
index 0000000..c03a577
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+ model = "Crystalfontz CFA-10036 Board";
+ compatible = "crystalfontz,cfa10036", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_4bit_pins_a
+ &mmc0_cd_cfg &mmc0_sck_cfg>;
+ bus-width = <4>;
+ status = "okay";
+ };
+ };
+
+ apbx@80040000 {
+ duart: serial@80074000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_b>;
+ status = "okay";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ gpios = <&gpio3 4 1>;
+ default-state = "on";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index ee520a5..773c0e8 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -22,6 +22,13 @@
apb@80000000 {
apbh@80000000 {
+ gpmi-nand@8000c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
+ &gpmi_pins_evk>;
+ status = "okay";
+ };
+
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
@@ -29,6 +36,7 @@
&mmc0_cd_cfg &mmc0_sck_cfg>;
bus-width = <8>;
wp-gpios = <&gpio2 12 0>;
+ vmmc-supply = <®_vddio_sd0>;
status = "okay";
};
@@ -36,6 +44,72 @@
compatible = "fsl,imx28-mmc";
bus-width = <8>;
wp-gpios = <&gpio0 28 0>;
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog-gpios@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
+ 0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */
+ 0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */
+ 0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */
+ 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
+ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+ 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+ 0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */
+ 0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ gpmi_pins_evk: gpmi-nand-evk@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */
+ 0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ lcdif_pins_evk: lcdif-evk@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+ 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+ 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+ 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ lcdif@80030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_24bit_pins_a
+ &lcdif_pins_evk>;
+ panel-enable-gpios = <&gpio3 30 0>;
+ status = "okay";
+ };
+
+ can0: can@80032000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&can0_pins_a>;
+ status = "okay";
+ };
+
+ can1: can@80034000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&can1_pins_a>;
status = "okay";
};
};
@@ -68,19 +142,58 @@
};
};
+ pwm: pwm@80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pins_a>;
+ status = "okay";
+ };
+
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
+
+ auart0: serial@8006a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart0_pins_a>;
+ status = "okay";
+ };
+
+ auart3: serial@80070000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart3_pins_a>;
+ status = "okay";
+ };
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+
+ usbphy1: usbphy@8007e000 {
+ status = "okay";
+ };
};
};
ahb@80080000 {
+ usb0: usb@80080000 {
+ vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+ };
+
+ usb1: usb@80090000 {
+ vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+ };
+
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
+ phy-supply = <®_fec_3v3>;
+ phy-reset-gpios = <&gpio4 13 0>;
+ phy-reset-duration = <100>;
status = "okay";
};
@@ -102,6 +215,40 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
+
+ reg_vddio_sd0: vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 28 0>;
+ };
+
+ reg_fec_3v3: fec-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fec-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 15 0>;
+ };
+
+ reg_usb0_vbus: usb0_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 9 0>;
+ enable-active-high;
+ };
+
+ reg_usb1_vbus: usb1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 8 0>;
+ enable-active-high;
+ };
};
sound {
@@ -111,4 +258,21 @@
saif-controllers = <&saif0 &saif1>;
audio-codec = <&sgtl5000>;
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ user {
+ label = "Heartbeat";
+ gpios = <&gpio3 5 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 2 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
new file mode 100644
index 0000000..183a3fd
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+ model = "DENX M28EVK";
+ compatible = "denx,m28evk", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ gpmi-nand@8000c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+ status = "okay";
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x00000000 0x00300000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "environment";
+ reg = <0x00300000 0x00080000>;
+ };
+
+ partition@2 {
+ label = "redundant-environment";
+ reg = <0x00380000 0x00080000>;
+ };
+
+ partition@3 {
+ label = "kernel";
+ reg = <0x00400000 0x00400000>;
+ };
+
+ partition@4 {
+ label = "filesystem";
+ reg = <0x00800000 0x0f800000>;
+ };
+ };
+
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_8bit_pins_a
+ &mmc0_cd_cfg
+ &mmc0_sck_cfg>;
+ bus-width = <8>;
+ wp-gpios = <&gpio3 10 1>;
+ status = "okay";
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog-gpios@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
+ 0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ lcdif_pins_m28: lcdif-m28@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */
+ 0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ lcdif@80030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_24bit_pins_a
+ &lcdif_pins_m28>;
+ status = "okay";
+ };
+
+ can0: can@80032000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&can0_pins_a>;
+ status = "okay";
+ };
+
+ can1: can@80034000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&can1_pins_a>;
+ status = "okay";
+ };
+ };
+
+ apbx@80040000 {
+ saif0: saif@80042000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&saif0_pins_a>;
+ status = "okay";
+ };
+
+ saif1: saif@80046000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&saif1_pins_a>;
+ fsl,saif-master = <&saif0>;
+ status = "okay";
+ };
+
+ i2c0: i2c@80058000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+
+ };
+
+ eeprom: eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+
+ rtc: rtc@68 {
+ compatible = "stm,mt41t62";
+ reg = <0x68>;
+ };
+ };
+
+ duart: serial@80074000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+
+ auart0: serial@8006a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart0_2pins_a>;
+ status = "okay";
+ };
+
+ auart3: serial@80070000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart3_pins_a>;
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ phy-reset-gpios = <&gpio3 11 0>;
+ status = "okay";
+ };
+
+ mac1: ethernet@800f4000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac1_pins_a>;
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+
+ sound {
+ compatible = "denx,m28evk-sgtl5000",
+ "fsl,mxs-audio-sgtl5000";
+ model = "m28evk-sgtl5000";
+ saif-controllers = <&saif0 &saif1>;
+ audio-codec = <&sgtl5000>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
new file mode 100644
index 0000000..62bf767
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -0,0 +1,97 @@
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX28 module";
+ compatible = "karo,tx28", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_4bit_pins_a
+ &mmc0_cd_cfg
+ &mmc0_sck_cfg>;
+ bus-width = <4>;
+ status = "okay";
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog-gpios@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+ };
+
+ apbx@80040000 {
+ i2c0: i2c@80058000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ ds1339: rtc@68 {
+ compatible = "mxim,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ pwm: pwm@80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins_a>;
+ status = "okay";
+ };
+
+ duart: serial@80074000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_4pins_a>;
+ status = "okay";
+ };
+
+ auart1: serial@8006c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart1_pins_a>;
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user {
+ label = "Heartbeat";
+ gpios = <&gpio4 10 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 4634cb8..915db89 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -22,6 +22,11 @@
gpio4 = &gpio4;
saif0 = &saif0;
saif1 = &saif1;
+ serial0 = &auart0;
+ serial1 = &auart1;
+ serial2 = &auart2;
+ serial3 = &auart3;
+ serial4 = &auart4;
};
cpus {
@@ -68,15 +73,15 @@
status = "disabled";
};
- bch@8000a000 {
- reg = <0x8000a000 2000>;
- interrupts = <41>;
- status = "disabled";
- };
-
- gpmi@8000c000 {
- reg = <0x8000c000 2000>;
- interrupts = <42 88>;
+ gpmi-nand@8000c000 {
+ compatible = "fsl,imx28-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x8000c000 2000>, <0x8000a000 2000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <88>, <41>;
+ interrupt-names = "gpmi-dma", "bch";
+ fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
@@ -161,7 +166,150 @@
duart_pins_a: duart@0 {
reg = <0>;
- fsl,pinmux-ids = <0x3102 0x3112>;
+ fsl,pinmux-ids = <
+ 0x3102 /* MX28_PAD_PWM0__DUART_RX */
+ 0x3112 /* MX28_PAD_PWM1__DUART_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ duart_pins_b: duart@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
+ 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ duart_4pins_a: duart-4pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
+ 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
+ 0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
+ 0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ gpmi_pins_a: gpmi-nand@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
+ 0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
+ 0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
+ 0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
+ 0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
+ 0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
+ 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
+ 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
+ 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
+ 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
+ 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
+ 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
+ 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
+ 0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
+ 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ gpmi_status_cfg: gpmi-status-cfg {
+ fsl,pinmux-ids = <
+ 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
+ 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
+ 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+ >;
+ fsl,drive-strength = <2>;
+ };
+
+ auart0_pins_a: auart0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
+ 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
+ 0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */
+ 0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ auart0_2pins_a: auart0-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
+ 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ auart1_pins_a: auart1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
+ 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
+ 0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */
+ 0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ auart1_2pins_a: auart1-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
+ 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ auart2_2pins_a: auart2-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */
+ 0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ auart3_pins_a: auart3@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
+ 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
+ 0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */
+ 0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ auart3_2pins_a: auart3-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */
+ 0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */
+ >;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
@@ -169,9 +317,17 @@
mac0_pins_a: mac0@0 {
reg = <0>;
- fsl,pinmux-ids = <0x4000 0x4010 0x4020
- 0x4030 0x4040 0x4060 0x4070
- 0x4080 0x4100>;
+ fsl,pinmux-ids = <
+ 0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */
+ 0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */
+ 0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */
+ 0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */
+ 0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */
+ 0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */
+ 0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */
+ 0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */
+ 0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */
+ >;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
@@ -179,8 +335,14 @@
mac1_pins_a: mac1@0 {
reg = <0>;
- fsl,pinmux-ids = <0x40f1 0x4091 0x40a1
- 0x40e1 0x40b1 0x40c1>;
+ fsl,pinmux-ids = <
+ 0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */
+ 0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */
+ 0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */
+ 0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */
+ 0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */
+ 0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */
+ >;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
@@ -188,28 +350,61 @@
mmc0_8bit_pins_a: mmc0-8bit@0 {
reg = <0>;
- fsl,pinmux-ids = <0x2000 0x2010 0x2020
- 0x2030 0x2040 0x2050 0x2060
- 0x2070 0x2080 0x2090 0x20a0>;
+ fsl,pinmux-ids = <
+ 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
+ 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
+ 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
+ 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
+ 0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */
+ 0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */
+ 0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */
+ 0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */
+ 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
+ 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
+ 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ mmc0_4bit_pins_a: mmc0-4bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
+ 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
+ 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
+ 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
+ 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
+ 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
+ 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+ >;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mmc0_cd_cfg: mmc0-cd-cfg {
- fsl,pinmux-ids = <0x2090>;
+ fsl,pinmux-ids = <
+ 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
+ >;
fsl,pull-up = <0>;
};
mmc0_sck_cfg: mmc0-sck-cfg {
- fsl,pinmux-ids = <0x20a0>;
+ fsl,pinmux-ids = <
+ 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+ >;
fsl,drive-strength = <2>;
fsl,pull-up = <0>;
};
i2c0_pins_a: i2c0@0 {
reg = <0>;
- fsl,pinmux-ids = <0x3180 0x3190>;
+ fsl,pinmux-ids = <
+ 0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */
+ 0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */
+ >;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
@@ -217,8 +412,12 @@
saif0_pins_a: saif0@0 {
reg = <0>;
- fsl,pinmux-ids =
- <0x3140 0x3150 0x3160 0x3170>;
+ fsl,pinmux-ids = <
+ 0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */
+ 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
+ 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
+ 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
+ >;
fsl,drive-strength = <2>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
@@ -226,11 +425,88 @@
saif1_pins_a: saif1@0 {
reg = <0>;
- fsl,pinmux-ids = <0x31a0>;
+ fsl,pinmux-ids = <
+ 0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */
+ >;
fsl,drive-strength = <2>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
+
+ pwm0_pins_a: pwm0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3100 /* MX28_PAD_PWM0__PWM_0 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ pwm2_pins_a: pwm2@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3120 /* MX28_PAD_PWM2__PWM_2 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ lcdif_24bit_pins_a: lcdif-24bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+ 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+ 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+ 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+ 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+ 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+ 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+ 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+ 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+ 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+ 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+ 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+ 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+ 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+ 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+ 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+ 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
+ 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+ 0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
+ 0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
+ 0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
+ 0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
+ 0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
+ 0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ can0_pins_a: can0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
+ 0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ can1_pins_a: can1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
+ 0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
};
digctl@8001c000 {
@@ -272,18 +548,21 @@
};
lcdif@80030000 {
+ compatible = "fsl,imx28-lcdif";
reg = <0x80030000 2000>;
interrupts = <38 86>;
status = "disabled";
};
can0: can@80032000 {
+ compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
reg = <0x80032000 2000>;
interrupts = <8>;
status = "disabled";
};
can1: can@80034000 {
+ compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
reg = <0x80034000 2000>;
interrupts = <9>;
status = "disabled";
@@ -370,9 +649,9 @@
};
rtc@80056000 {
+ compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
reg = <0x80056000 2000>;
- interrupts = <28 29>;
- status = "disabled";
+ interrupts = <29>;
};
i2c0: i2c@80058000 {
@@ -393,8 +672,11 @@
status = "disabled";
};
- pwm@80064000 {
+ pwm: pwm@80064000 {
+ compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
reg = <0x80064000 2000>;
+ #pwm-cells = <2>;
+ fsl,pwm-number = <8>;
status = "disabled";
};
@@ -404,30 +686,35 @@
};
auart0: serial@8006a000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006a000 0x2000>;
interrupts = <112 70 71>;
status = "disabled";
};
auart1: serial@8006c000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
interrupts = <113 72 73>;
status = "disabled";
};
auart2: serial@8006e000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006e000 0x2000>;
interrupts = <114 74 75>;
status = "disabled";
};
auart3: serial@80070000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80070000 0x2000>;
interrupts = <115 76 77>;
status = "disabled";
};
auart4: serial@80072000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80072000 0x2000>;
interrupts = <116 78 79>;
status = "disabled";
@@ -441,11 +728,13 @@
};
usbphy0: usbphy@8007c000 {
+ compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
reg = <0x8007c000 0x2000>;
status = "disabled";
};
usbphy1: usbphy@8007e000 {
+ compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
reg = <0x8007e000 0x2000>;
status = "disabled";
};
@@ -459,13 +748,19 @@
reg = <0x80080000 0x80000>;
ranges;
- usbctrl0: usbctrl@80080000 {
+ usb0: usb@80080000 {
+ compatible = "fsl,imx28-usb", "fsl,imx27-usb";
reg = <0x80080000 0x10000>;
+ interrupts = <93>;
+ fsl,usbphy = <&usbphy0>;
status = "disabled";
};
- usbctrl1: usbctrl@80090000 {
+ usb1: usb@80090000 {
+ compatible = "fsl,imx28-usb", "fsl,imx27-usb";
reg = <0x80090000 0x10000>;
+ interrupts = <92>;
+ fsl,usbphy = <&usbphy1>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts
new file mode 100644
index 0000000..24731cb
--- /dev/null
+++ b/arch/arm/boot/dts/imx31-bug.dts
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx31.dtsi"
+
+/ {
+ model = "Buglabs i.MX31 Bug 1.x";
+ compatible = "fsl,imx31-bug", "fsl,imx31";
+
+ memory {
+ reg = <0x80000000 0x8000000>; /* 128M */
+ };
+
+ soc {
+ aips@43f00000 { /* AIPS1 */
+ uart5: serial@43fb4000 {
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
new file mode 100644
index 0000000..eef7099
--- /dev/null
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -0,0 +1,88 @@
+/*
+ * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ };
+
+ avic: avic-interrupt-controller@60000000 {
+ compatible = "fsl,imx31-avic", "fsl,avic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x60000000 0x100000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&avic>;
+ ranges;
+
+ aips@43f00000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x43f00000 0x100000>;
+ ranges;
+
+ uart1: serial@43f90000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ status = "disabled";
+ };
+
+ uart2: serial@43f94000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43f94000 0x4000>;
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ uart4: serial@43fb0000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43fb0000 0x4000>;
+ interrupts = <46>;
+ status = "disabled";
+ };
+
+ uart5: serial@43fb4000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43fb4000 0x4000>;
+ interrupts = <47>;
+ status = "disabled";
+ };
+ };
+
+ spba@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x100000>;
+ ranges;
+
+ uart3: serial@5000c000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ interrupts = <18>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index bfa65ab..922adef 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -133,7 +133,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio@73f88000 {
@@ -143,7 +143,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio@73f8c000 {
@@ -153,7 +153,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio@73f90000 {
@@ -163,7 +163,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
wdog@73f98000 { /* WDOG1 */
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index e3e8694..4e735ed 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -135,7 +135,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio@53f88000 {
@@ -145,7 +145,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio@53f8c000 {
@@ -155,7 +155,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio@53f90000 {
@@ -165,7 +165,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
wdog@53f98000 { /* WDOG1 */
@@ -203,7 +203,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio@53fe0000 {
@@ -213,7 +213,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio7: gpio@53fe4000 {
@@ -223,7 +223,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
i2c@53fec000 { /* I2C3 */
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index db4c609..d792581 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -22,6 +22,12 @@
};
soc {
+ gpmi-nand@00112000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand_1>;
+ status = "disabled"; /* gpmi nand conflicts with SD */
+ };
+
aips-bus@02100000 { /* AIPS2 */
ethernet@02188000 {
phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index e0ec929..d42e851 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -27,6 +27,8 @@
ecspi@02008000 { /* eCSPI1 */
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
status = "okay";
flash: m25p80@0 {
@@ -42,9 +44,31 @@
};
};
+ iomuxc@020e0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_hog>;
+
+ gpios {
+ pinctrl_gpio_hog: gpiohog {
+ fsl,pins = <
+ 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
+ 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
+ >;
+ };
+ };
+ };
};
aips-bus@02100000 { /* AIPS2 */
+ usb@02184000 { /* USB OTG */
+ vbus-supply = <®_usb_otg_vbus>;
+ status = "okay";
+ };
+
+ usb@02184200 { /* USB1 */
+ status = "okay";
+ };
+
ethernet@02188000 {
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 0>;
@@ -111,6 +135,15 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
+
+ reg_usb_otg_vbus: usb_otg_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
};
sound {
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 8c90cba..c25d495 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -87,6 +87,23 @@
interrupt-parent = <&intc>;
ranges;
+ dma-apbh@00110000 {
+ compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
+ reg = <0x00110000 0x2000>;
+ };
+
+ gpmi-nand@00112000 {
+ compatible = "fsl,imx6q-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <0 13 0x04>, <0 15 0x04>;
+ interrupt-names = "gpmi-dma", "bch";
+ fsl,gpmi-dma-channel = <0>;
+ status = "disabled";
+ };
+
timer@00a00600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x00a00600 0x20>;
@@ -266,7 +283,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio@020a0000 {
@@ -276,7 +293,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio@020a4000 {
@@ -286,7 +303,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio@020a8000 {
@@ -296,7 +313,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio5: gpio@020ac000 {
@@ -306,7 +323,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio@020b0000 {
@@ -316,7 +333,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio7: gpio@020b4000 {
@@ -326,7 +343,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
kpp@020b8000 {
@@ -444,12 +461,14 @@
};
};
- usbphy@020c9000 { /* USBPHY1 */
+ usbphy1: usbphy@020c9000 {
+ compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <0 44 0x04>;
};
- usbphy@020ca000 { /* USBPHY2 */
+ usbphy2: usbphy@020ca000 {
+ compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
interrupts = <0 45 0x04>;
};
@@ -495,6 +514,30 @@
};
};
+ gpmi-nand {
+ pinctrl_gpmi_nand_1: gpmi-nand-1 {
+ fsl,pins = <1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
+ 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
+ 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
+ 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
+ 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
+ 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
+ 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
+ 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
+ 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
+ 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
+ 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
+ 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
+ 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
+ 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
+ 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
+ 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
+ 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
+ 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
+ 1463 0x00b1>; /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
+ };
+ };
+
i2c1 {
pinctrl_i2c1_1: i2c1grp-1 {
fsl,pins = <137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */
@@ -538,6 +581,14 @@
1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
};
};
+
+ ecspi1 {
+ pinctrl_ecspi1_1: ecspi1grp-1 {
+ fsl,pins = <101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
+ 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
+ 94 0x100b1>; /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
+ };
+ };
};
dcic@020e4000 { /* DCIC1 */
@@ -573,6 +624,36 @@
reg = <0x0217c000 0x4000>;
};
+ usb@02184000 { /* USB OTG */
+ compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+ reg = <0x02184000 0x200>;
+ interrupts = <0 43 0x04>;
+ fsl,usbphy = <&usbphy1>;
+ status = "disabled";
+ };
+
+ usb@02184200 { /* USB1 */
+ compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+ reg = <0x02184200 0x200>;
+ interrupts = <0 40 0x04>;
+ fsl,usbphy = <&usbphy2>;
+ status = "disabled";
+ };
+
+ usb@02184400 { /* USB2 */
+ compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+ reg = <0x02184400 0x200>;
+ interrupts = <0 41 0x04>;
+ status = "disabled";
+ };
+
+ usb@02184600 { /* USB3 */
+ compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+ reg = <0x02184600 0x200>;
+ interrupts = <0 42 0x04>;
+ status = "disabled";
+ };
+
ethernet@02188000 {
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 3f5dad8..e5ffe96 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -35,13 +35,14 @@
slc: flash@20020000 {
compatible = "nxp,lpc3220-slc";
reg = <0x20020000 0x1000>;
- status = "disable";
+ status = "disabled";
};
- mlc: flash@200B0000 {
+ mlc: flash@200a8000 {
compatible = "nxp,lpc3220-mlc";
- reg = <0x200B0000 0x1000>;
- status = "disable";
+ reg = <0x200a8000 0x11000>;
+ interrupts = <11 0>;
+ status = "disabled";
};
dma@31000000 {
@@ -57,21 +58,21 @@
compatible = "nxp,ohci-nxp", "usb-ohci";
reg = <0x31020000 0x300>;
interrupts = <0x3b 0>;
- status = "disable";
+ status = "disabled";
};
usbd@31020000 {
compatible = "nxp,lpc3220-udc";
reg = <0x31020000 0x300>;
interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
- status = "disable";
+ status = "disabled";
};
clcd@31040000 {
compatible = "arm,pl110", "arm,primecell";
reg = <0x31040000 0x1000>;
interrupts = <0x0e 0>;
- status = "disable";
+ status = "disabled";
};
mac: ethernet@31060000 {
@@ -114,9 +115,10 @@
};
sd@20098000 {
- compatible = "arm,pl180", "arm,primecell";
+ compatible = "arm,pl18x", "arm,primecell";
reg = <0x20098000 0x1000>;
interrupts = <0x0f 0>, <0x0d 0>;
+ status = "disabled";
};
i2s1: i2s@2009C000 {
@@ -124,24 +126,42 @@
reg = <0x2009C000 0x1000>;
};
+ /* UART5 first since it is the default console, ttyS0 */
+ uart5: serial@40090000 {
+ /* actually, ns16550a w/ 64 byte fifos! */
+ compatible = "nxp,lpc3220-uart";
+ reg = <0x40090000 0x1000>;
+ interrupts = <9 0>;
+ clock-frequency = <13000000>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
uart3: serial@40080000 {
- compatible = "nxp,serial";
+ compatible = "nxp,lpc3220-uart";
reg = <0x40080000 0x1000>;
+ interrupts = <7 0>;
+ clock-frequency = <13000000>;
+ reg-shift = <2>;
+ status = "disabled";
};
uart4: serial@40088000 {
- compatible = "nxp,serial";
+ compatible = "nxp,lpc3220-uart";
reg = <0x40088000 0x1000>;
- };
-
- uart5: serial@40090000 {
- compatible = "nxp,serial";
- reg = <0x40090000 0x1000>;
+ interrupts = <8 0>;
+ clock-frequency = <13000000>;
+ reg-shift = <2>;
+ status = "disabled";
};
uart6: serial@40098000 {
- compatible = "nxp,serial";
+ compatible = "nxp,lpc3220-uart";
reg = <0x40098000 0x1000>;
+ interrupts = <10 0>;
+ clock-frequency = <13000000>;
+ reg-shift = <2>;
+ status = "disabled";
};
i2c1: i2c@400A0000 {
@@ -192,18 +212,24 @@
};
uart1: serial@40014000 {
- compatible = "nxp,serial";
+ compatible = "nxp,lpc3220-hsuart";
reg = <0x40014000 0x1000>;
+ interrupts = <26 0>;
+ status = "disabled";
};
uart2: serial@40018000 {
- compatible = "nxp,serial";
+ compatible = "nxp,lpc3220-hsuart";
reg = <0x40018000 0x1000>;
+ interrupts = <25 0>;
+ status = "disabled";
};
- uart7: serial@4001C000 {
- compatible = "nxp,serial";
- reg = <0x4001C000 0x1000>;
+ uart7: serial@4001c000 {
+ compatible = "nxp,lpc3220-hsuart";
+ reg = <0x4001c000 0x1000>;
+ interrupts = <24 0>;
+ status = "disabled";
};
rtc@40024000 {
@@ -235,21 +261,28 @@
compatible = "nxp,lpc3220-adc";
reg = <0x40048000 0x1000>;
interrupts = <0x27 0>;
- status = "disable";
+ status = "disabled";
};
tsc@40048000 {
compatible = "nxp,lpc3220-tsc";
reg = <0x40048000 0x1000>;
interrupts = <0x27 0>;
- status = "disable";
+ status = "disabled";
};
key@40050000 {
compatible = "nxp,lpc3220-key";
reg = <0x40050000 0x1000>;
+ interrupts = <54 0>;
+ status = "disabled";
};
+ pwm: pwm@4005C000 {
+ compatible = "nxp,lpc3220-pwm";
+ reg = <0x4005C000 0x8>;
+ status = "disabled";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts
index 153a4b2..c9b4f27 100644
--- a/arch/arm/boot/dts/mmp2-brownstone.dts
+++ b/arch/arm/boot/dts/mmp2-brownstone.dts
@@ -11,7 +11,7 @@
/include/ "mmp2.dtsi"
/ {
- model = "Marvell MMP2 Aspenite Development Board";
+ model = "Marvell MMP2 Brownstone Development Board";
compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
chosen {
@@ -19,7 +19,7 @@
};
memory {
- reg = <0x00000000 0x04000000>;
+ reg = <0x00000000 0x08000000>;
};
soc {
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index f2ab4ea..581cb08 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -44,6 +44,8 @@
compatible = "ti,omap2-intc";
interrupt-controller;
#interrupt-cells = <1>;
+ ti,intc-size = <96>;
+ reg = <0x480FE000 0x1000>;
};
uart1: serial@4806a000 {
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
new file mode 100644
index 0000000..25b50b7
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap2.dtsi"
+
+/ {
+ model = "TI OMAP2420 H4 board";
+ compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x84000000>; /* 64 MB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 5b4506c..cdcb98c 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -61,9 +61,9 @@
};
&mmc2 {
- status = "disable";
+ status = "disabled";
};
&mmc3 {
- status = "disable";
+ status = "disabled";
};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index 2eee16e..f349ee9 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -18,3 +18,31 @@
reg = <0x80000000 0x10000000>; /* 256 MB */
};
};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+/include/ "twl4030.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ /*
+ * TVP5146 Video decoder-in for analog input support.
+ */
+ tvp5146@5c {
+ compatible = "ti,tvp5146m2";
+ reg = <0x5c>;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 99474fa..8109471 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -215,5 +215,10 @@
compatible = "ti,omap3-hsmmc";
ti,hwmods = "mmc3";
};
+
+ wdt2: wdt@48314000 {
+ compatible = "ti,omap3-wdt";
+ ti,hwmods = "wd_timer2";
+ };
};
};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 1efe0c5..9880c12 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -32,6 +32,30 @@
linux,default-trigger = "mmc0";
};
};
+
+ sound: sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "PandaBoard";
+
+ ti,mclk-freq = <38400000>;
+
+ ti,mcpdm = <&mcpdm>;
+
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Ext Spk", "HFL",
+ "Ext Spk", "HFR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "HSMIC", "Headset Mic",
+ "Headset Mic", "Headset Mic Bias",
+ "AFML", "Line In",
+ "AFMR", "Line In";
+ };
};
&i2c1 {
@@ -43,6 +67,19 @@
interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
+
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ reg = <0x4b>;
+ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+ interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
+ interrupt-parent = <&gic>;
+ ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+ enable-active-high;
+ };
};
/include/ "twl6030.dtsi"
@@ -74,15 +111,15 @@
};
&mmc2 {
- status = "disable";
+ status = "disabled";
};
&mmc3 {
- status = "disable";
+ status = "disabled";
};
&mmc4 {
- status = "disable";
+ status = "disabled";
};
&mmc5 {
diff --git a/arch/arm/boot/dts/omap4-pandaES.dts b/arch/arm/boot/dts/omap4-pandaES.dts
new file mode 100644
index 0000000..d4ba43a
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-pandaES.dts
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/include/ "omap4-panda.dts"
+
+/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
+&sound {
+ ti,model = "PandaBoardES";
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Ext Spk", "HFL",
+ "Ext Spk", "HFR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "AFML", "Line In",
+ "AFMR", "Line In";
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index d08c4d1..72216e9 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -28,6 +28,14 @@
regulator-boot-on;
};
+ vbat: fixedregulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "VBAT";
+ regulator-min-microvolt = <3750000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-boot-on;
+ };
+
leds {
compatible = "gpio-leds";
debug0 {
@@ -70,6 +78,41 @@
gpios = <&gpio5 11 0>; /* 139 */
};
};
+
+ sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "SDP4430";
+
+ ti,jack-detection = <1>;
+ ti,mclk-freq = <38400000>;
+
+ ti,mcpdm = <&mcpdm>;
+ ti,dmic = <&dmic>;
+
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Earphone Spk", "EP",
+ "Ext Spk", "HFL",
+ "Ext Spk", "HFR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "Vibrator", "VIBRAL",
+ "Vibrator", "VIBRAR",
+ "HSMIC", "Headset Mic",
+ "Headset Mic", "Headset Mic Bias",
+ "MAINMIC", "Main Handset Mic",
+ "Main Handset Mic", "Main Mic Bias",
+ "SUBMIC", "Sub Handset Mic",
+ "Sub Handset Mic", "Main Mic Bias",
+ "AFML", "Line In",
+ "AFMR", "Line In",
+ "DMic", "Digital Mic",
+ "Digital Mic", "Digital Mic1 Bias";
+ };
};
&i2c1 {
@@ -81,6 +124,31 @@
interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
+
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ reg = <0x4b>;
+ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+ interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
+ interrupt-parent = <&gic>;
+ ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+ enable-active-high;
+
+ /* regulators for vibra motor */
+ vddvibl-supply = <&vbat>;
+ vddvibr-supply = <&vbat>;
+
+ vibra {
+ /* Vibra driver, motor resistance parameters */
+ ti,vibldrv-res = <8>;
+ ti,vibrdrv-res = <3>;
+ ti,viblmotor-res = <10>;
+ ti,vibrmotor-res = <10>;
+ };
+ };
};
/include/ "twl6030.dtsi"
@@ -147,11 +215,11 @@
};
&mmc3 {
- status = "disable";
+ status = "disabled";
};
&mmc4 {
- status = "disable";
+ status = "disabled";
};
&mmc5 {
diff --git a/arch/arm/boot/dts/omap4-var_som.dts b/arch/arm/boot/dts/omap4-var_som.dts
new file mode 100644
index 0000000..6601e6a
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-var_som.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+ model = "Variscite OMAP4 SOM";
+ compatible = "var,omap4-var_som", "ti,omap4430", "ti,omap4";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ vdd_eth: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_ETH";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+ interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+ interrupt-parent = <&gic>;
+ };
+};
+
+/include/ "twl6030.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ /*
+ * Temperature Sensor
+ * http://www.ti.com/lit/ds/symlink/tmp105.pdf
+ */
+ tmp105@49 {
+ compatible = "ti,tmp105";
+ reg = <0x49>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+};
+
+&mcspi1 {
+ eth@0 {
+ compatible = "ks8851";
+ spi-max-frequency = <24000000>;
+ reg = <0>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11>; /* gpio line 171 */
+ vdd-supply = <&vdd_eth>;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc>;
+ ti,bus-width = <8>;
+ ti,non-removable;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ ti,bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 359c497..04cbbcb 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -272,5 +272,28 @@
ti,hwmods = "mmc5";
ti,needs-special-reset;
};
+
+ wdt2: wdt@4a314000 {
+ compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+ ti,hwmods = "wd_timer2";
+ };
+
+ mcpdm: mcpdm@40132000 {
+ compatible = "ti,omap4-mcpdm";
+ reg = <0x40132000 0x7f>, /* MPU private access */
+ <0x49032000 0x7f>; /* L3 Interconnect */
+ interrupts = <0 112 0x4>;
+ interrupt-parent = <&gic>;
+ ti,hwmods = "mcpdm";
+ };
+
+ dmic: dmic@4012e000 {
+ compatible = "ti,omap4-dmic";
+ reg = <0x4012e000 0x7f>, /* MPU private access */
+ <0x4902e000 0x7f>; /* L3 Interconnect */
+ interrupts = <0 114 0x4>;
+ interrupt-parent = <&gic>;
+ ti,hwmods = "dmic";
+ };
};
};
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
new file mode 100644
index 0000000..200c39a
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-evm.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap5.dtsi"
+
+/ {
+ model = "TI OMAP5 EVM board";
+ compatible = "ti,omap5-evm", "ti,omap5";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
new file mode 100644
index 0000000..57e5270
--- /dev/null
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -0,0 +1,184 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+/*
+ * Carveout for multimedia usecases
+ * It should be the last 48MB of the first 512MB memory part
+ * In theory, it should not even exist. That zone should be reserved
+ * dynamically during the .reserve callback.
+ */
+/memreserve/ 0x9d000000 0x03000000;
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ti,omap5";
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a15";
+ };
+ cpu@1 {
+ compatible = "arm,cortex-a15";
+ };
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is uses for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap5-mpu";
+ ti,hwmods = "mpu";
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the OMAP3 interconnect.
+ * The real OMAP interconnect network is quite complex.
+ * Since that will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp {
+ compatible = "ti,omap4-l3-noc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+
+ gic: interrupt-controller@48211000 {
+ compatible = "arm,cortex-a15-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48211000 0x1000>,
+ <0x48212000 0x1000>;
+ };
+
+ gpio1: gpio@4ae10000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio1";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio@48055000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio2";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio@48057000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio3";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio4: gpio@48059000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio4";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio5: gpio@4805b000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio5";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio6: gpio@4805d000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio6";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio7: gpio@48051000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio7";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio8: gpio@48053000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio8";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ uart1: serial@4806a000 {
+ compatible = "ti,omap4-uart";
+ ti,hwmods = "uart1";
+ clock-frequency = <48000000>;
+ };
+
+ uart2: serial@4806c000 {
+ compatible = "ti,omap4-uart";
+ ti,hwmods = "uart2";
+ clock-frequency = <48000000>;
+ };
+
+ uart3: serial@48020000 {
+ compatible = "ti,omap4-uart";
+ ti,hwmods = "uart3";
+ clock-frequency = <48000000>;
+ };
+
+ uart4: serial@4806e000 {
+ compatible = "ti,omap4-uart";
+ ti,hwmods = "uart4";
+ clock-frequency = <48000000>;
+ };
+
+ uart5: serial@48066000 {
+ compatible = "ti,omap5-uart";
+ ti,hwmods = "uart5";
+ clock-frequency = <48000000>;
+ };
+
+ uart6: serial@48068000 {
+ compatible = "ti,omap6-uart";
+ ti,hwmods = "uart6";
+ clock-frequency = <48000000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
index c4ff6d1..802ec5b 100644
--- a/arch/arm/boot/dts/phy3250.dts
+++ b/arch/arm/boot/dts/phy3250.dts
@@ -54,6 +54,17 @@
#address-cells = <1>;
#size-cells = <1>;
+ nxp,wdr-clks = <14>;
+ nxp,wwidth = <40000000>;
+ nxp,whold = <100000000>;
+ nxp,wsetup = <100000000>;
+ nxp,rdr-clks = <14>;
+ nxp,rwidth = <40000000>;
+ nxp,rhold = <66666666>;
+ nxp,rsetup = <100000000>;
+ nand-on-flash-bbt;
+ gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
mtd0@00000000 {
label = "phy3250-boot";
reg = <0x00000000 0x00064000>;
@@ -83,6 +94,14 @@
};
apb {
+ uart5: serial@40090000 {
+ status = "okay";
+ };
+
+ uart3: serial@40080000 {
+ status = "okay";
+ };
+
i2c1: i2c@400A0000 {
clock-frequency = <100000>;
@@ -114,16 +133,58 @@
};
ssp0: ssp@20084000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pl022,num-chipselects = <1>;
+ cs-gpios = <&gpio 3 5 0>;
+
eeprom: at25@0 {
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,slave-tx-disable = <0>;
+ pl022,com-mode = <0>;
+ pl022,rx-level-trig = <1>;
+ pl022,tx-level-trig = <1>;
+ pl022,ctrl-len = <11>;
+ pl022,wait-state = <0>;
+ pl022,duplex = <0>;
+
+ at25,byte-len = <0x8000>;
+ at25,addr-mode = <2>;
+ at25,page-size = <64>;
+
compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
};
};
+
+ sd@20098000 {
+ wp-gpios = <&gpio 3 0 0>;
+ cd-gpios = <&gpio 3 1 0>;
+ cd-inverted;
+ bus-width = <4>;
+ status = "okay";
+ };
};
fab {
+ uart2: serial@40018000 {
+ status = "okay";
+ };
+
tsc@40048000 {
status = "okay";
};
+
+ key@40050000 {
+ status = "okay";
+ keypad,num-rows = <1>;
+ keypad,num-columns = <1>;
+ nxp,debounce-delay-ms = <3>;
+ nxp,scan-delay-ms = <34>;
+ linux,keymap = <0x00000002>;
+ };
};
};
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index ec3c339..7e334d4 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -77,6 +77,8 @@
used-led {
label = "user_led";
gpios = <&gpio4 14 0x4>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
};
};
@@ -101,15 +103,30 @@
};
};
+ // External Micro SD slot
sdi@80126000 {
- status = "enabled";
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <8>;
+ mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+ #gpio-cells = <1>;
cd-gpios = <&gpio6 26 0x4>; // 218
+ cd-inverted;
+
+ status = "okay";
};
+ // On-board eMMC
sdi@80114000 {
- status = "enabled";
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <8>;
+ mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+ status = "okay";
};
uart@80120000 {
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
new file mode 100644
index 0000000..0772f57
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2012 Altera <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &gmac0;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ intc: intc@fffed000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xfffed000 0x1000>,
+ <0xfffec100 0x100>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ device_type = "soc";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pdma: pdma@ffe01000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xffe01000 0x1000>;
+ interrupts = <0 180 4>;
+ };
+ };
+
+ gmac0: stmmac@ff700000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+ reg = <0xff700000 0x2000>;
+ interrupts = <0 115 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+ phy-mode = "gmii";
+ };
+
+ L2: l2-cache@fffef000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xfffef000 0x1000>;
+ interrupts = <0 38 0x04>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ /* Local timer */
+ timer@fffec600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xfffec600 0x100>;
+ interrupts = <1 13 0xf04>;
+ };
+
+ timer0: timer@ffc08000 {
+ compatible = "snps,dw-apb-timer-sp";
+ interrupts = <0 167 4>;
+ clock-frequency = <200000000>;
+ reg = <0xffc08000 0x1000>;
+ };
+
+ timer1: timer@ffc09000 {
+ compatible = "snps,dw-apb-timer-sp";
+ interrupts = <0 168 4>;
+ clock-frequency = <200000000>;
+ reg = <0xffc09000 0x1000>;
+ };
+
+ timer2: timer@ffd00000 {
+ compatible = "snps,dw-apb-timer-osc";
+ interrupts = <0 169 4>;
+ clock-frequency = <200000000>;
+ reg = <0xffd00000 0x1000>;
+ };
+
+ timer3: timer@ffd01000 {
+ compatible = "snps,dw-apb-timer-osc";
+ interrupts = <0 170 4>;
+ clock-frequency = <200000000>;
+ reg = <0xffd01000 0x1000>;
+ };
+
+ uart0: uart@ffc02000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc02000 0x1000>;
+ clock-frequency = <7372800>;
+ interrupts = <0 162 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ uart1: uart@ffc03000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc03000 0x1000>;
+ clock-frequency = <7372800>;
+ interrupts = <0 163 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dts
new file mode 100644
index 0000000..ab7e4a9
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dts
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+/include/ "socfpga.dtsi"
+
+/ {
+ model = "Altera SOCFPGA Cyclone V";
+ compatible = "altr,socfpga-cyclone5";
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x10000000>; /* 256MB */
+ };
+};
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index 8314e41..dd4358b 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -1,7 +1,7 @@
/*
* DTS file for SPEAr1310 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
index 9e61da4..419ea74 100644
--- a/arch/arm/boot/dts/spear1310.dtsi
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -1,7 +1,7 @@
/*
* DTS file for all SPEAr1310 SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index 0d8472e..c9a54e0 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -1,7 +1,7 @@
/*
* DTS file for SPEAr1340 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index a26fc47..d71fe2a 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -1,7 +1,7 @@
/*
* DTS file for all SPEAr1340 SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index 1f8e1e1..f7b84ac 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -1,7 +1,7 @@
/*
* DTS file for all SPEAr13xx SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
@@ -43,8 +43,8 @@
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 8 0x04
- 0 9 0x04>;
+ interrupts = <0 6 0x04
+ 0 7 0x04>;
};
L2: l2-cache {
@@ -119,8 +119,8 @@
gmac0: eth@e2000000 {
compatible = "st,spear600-gmac";
reg = <0xe2000000 0x8000>;
- interrupts = <0 23 0x4
- 0 24 0x4>;
+ interrupts = <0 33 0x4
+ 0 34 0x4>;
interrupt-names = "macirq", "eth_wake_irq";
status = "disabled";
};
@@ -202,6 +202,7 @@
kbd@e0300000 {
compatible = "st,spear300-kbd";
reg = <0xe0300000 0x1000>;
+ interrupts = <0 52 0x4>;
status = "disabled";
};
@@ -224,7 +225,7 @@
serial@e0000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xe0000000 0x1000>;
- interrupts = <0 36 0x4>;
+ interrupts = <0 35 0x4>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts
index fc82b1a..d71b8d5 100644
--- a/arch/arm/boot/dts/spear300-evb.dts
+++ b/arch/arm/boot/dts/spear300-evb.dts
@@ -1,7 +1,7 @@
/*
* DTS file for SPEAr300 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
index 01c5e35..ed3627c 100644
--- a/arch/arm/boot/dts/spear300.dtsi
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -1,7 +1,7 @@
/*
* DTS file for SPEAr300 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts
index dc5e2d4..b00544e 100644
--- a/arch/arm/boot/dts/spear310-evb.dts
+++ b/arch/arm/boot/dts/spear310-evb.dts
@@ -1,7 +1,7 @@
/*
* DTS file for SPEAr310 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index e47081c..62fc4fb 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -1,7 +1,7 @@
/*
* DTS file for SPEAr310 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
index 6308fa3..e4e912f 100644
--- a/arch/arm/boot/dts/spear320-evb.dts
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -1,7 +1,7 @@
/*
* DTS file for SPEAr320 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
@@ -15,8 +15,8 @@
/include/ "spear320.dtsi"
/ {
- model = "ST SPEAr300 Evaluation Board";
- compatible = "st,spear300-evb", "st,spear300";
+ model = "ST SPEAr320 Evaluation Board";
+ compatible = "st,spear320-evb", "st,spear320";
#address-cells = <1>;
#size-cells = <1>;
@@ -26,7 +26,7 @@
ahb {
pinmux@b3000000 {
- st,pinmux-mode = <3>;
+ st,pinmux-mode = <4>;
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index 5372ca3..1f49d69 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -1,7 +1,7 @@
/*
* DTS file for SPEAr320 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
index 9107255..3a8bb57 100644
--- a/arch/arm/boot/dts/spear3xx.dtsi
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -1,7 +1,7 @@
/*
* DTS file for all SPEAr3xx SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
index 089f0a4..a3c36e4 100644
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -181,6 +181,7 @@
timer@f0000000 {
compatible = "st,spear-timer";
reg = <0xf0000000 0x400>;
+ interrupt-parent = <&vic0>;
interrupts = <16>;
};
};
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
similarity index 99%
rename from arch/arm/boot/dts/tegra-harmony.dts
rename to arch/arm/boot/dts/tegra20-harmony.dts
index 7de7013..f146dbf 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -307,7 +307,6 @@
cd-gpios = <&gpio 58 0>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
- support-8bit;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
similarity index 99%
rename from arch/arm/boot/dts/tegra-paz00.dts
rename to arch/arm/boot/dts/tegra20-paz00.dts
index bfeb117..684a9e1 100644
--- a/arch/arm/boot/dts/tegra-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -301,7 +301,6 @@
sdhci@c8000600 {
status = "okay";
- support-8bit;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
similarity index 88%
rename from arch/arm/boot/dts/tegra-seaboard.dts
rename to arch/arm/boot/dts/tegra20-seaboard.dts
index 89cb7f2..85e621a 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -64,11 +64,6 @@
nvidia,pins = "dap4";
nvidia,function = "dap4";
};
- ddc {
- nvidia,pins = "ddc", "owc", "spdi", "spdo",
- "uac";
- nvidia,function = "rsvd2";
- };
dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
nvidia,function = "vi";
@@ -129,14 +124,14 @@
"lspi", "lvp1", "lvs";
nvidia,function = "displaya";
};
+ owc {
+ nvidia,pins = "owc", "spdi", "spdo", "uac";
+ nvidia,function = "rsvd2";
+ };
pmc {
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
};
- pta {
- nvidia,pins = "pta";
- nvidia,function = "i2c2";
- };
rm {
nvidia,pins = "rm";
nvidia,function = "i2c1";
@@ -176,7 +171,7 @@
conf_ata {
nvidia,pins = "ata", "atb", "atc", "atd",
"cdev1", "cdev2", "dap1", "dap2",
- "dap4", "dtf", "gma", "gmc", "gmd",
+ "dap4", "ddc", "dtf", "gma", "gmc", "gmd",
"gme", "gpu", "gpu7", "i2cp", "irrx",
"irtx", "pta", "rm", "sdc", "sdd",
"slxd", "slxk", "spdi", "spdo", "uac",
@@ -185,7 +180,7 @@
nvidia,tristate = <0>;
};
conf_ate {
- nvidia,pins = "ate", "csus", "dap3", "ddc",
+ nvidia,pins = "ate", "csus", "dap3",
"gpv", "owc", "slxc", "spib", "spid",
"spie";
nvidia,pull = <0>;
@@ -255,6 +250,39 @@
nvidia,slew-rate-falling = <3>;
};
};
+
+ state_i2cmux_ddc: pinmux_i2cmux_ddc {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "i2c2";
+ };
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "rsvd4";
+ };
+ };
+
+ state_i2cmux_pta: pinmux_i2cmux_pta {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "rsvd4";
+ };
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "i2c2";
+ };
+ };
+
+ state_i2cmux_idle: pinmux_i2cmux_idle {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "rsvd4";
+ };
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "rsvd4";
+ };
+ };
};
i2s@70002800 {
@@ -303,12 +331,37 @@
i2c@7000c400 {
status = "okay";
clock-frequency = <100000>;
+ };
- smart-battery@b {
- compatible = "ti,bq20z75", "smart-battery-1.1";
- reg = <0xb>;
- ti,i2c-retry-count = <2>;
- ti,poll-retry-count = <10>;
+ i2cmux {
+ compatible = "i2c-mux-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-parent = <&{/i2c@7000c400}>;
+
+ pinctrl-names = "ddc", "pta", "idle";
+ pinctrl-0 = <&state_i2cmux_ddc>;
+ pinctrl-1 = <&state_i2cmux_pta>;
+ pinctrl-2 = <&state_i2cmux_idle>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smart-battery@b {
+ compatible = "ti,bq20z75", "smart-battery-1.1";
+ reg = <0xb>;
+ ti,i2c-retry-count = <2>;
+ ti,poll-retry-count = <10>;
+ };
};
};
@@ -334,7 +387,7 @@
};
};
- emc {
+ memory-controller@0x7000f400 {
emc-table@190000 {
reg = <190000>;
compatible = "nvidia,tegra20-emc-table";
@@ -397,7 +450,6 @@
sdhci@c8000600 {
status = "okay";
- support-8bit;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
similarity index 100%
rename from arch/arm/boot/dts/tegra-trimslice.dts
rename to arch/arm/boot/dts/tegra20-trimslice.dts
diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
similarity index 99%
rename from arch/arm/boot/dts/tegra-ventana.dts
rename to arch/arm/boot/dts/tegra20-ventana.dts
index 445343b..be90544 100644
--- a/arch/arm/boot/dts/tegra-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -314,7 +314,6 @@
sdhci@c8000600 {
status = "okay";
- support-8bit;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
new file mode 100644
index 0000000..6916310
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -0,0 +1,301 @@
+/dts-v1/;
+
+/include/ "tegra20.dtsi"
+
+/ {
+ model = "NVIDIA Tegra2 Whistler evaluation board";
+ compatible = "nvidia,whistler", "nvidia,tegra20";
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ata {
+ nvidia,pins = "ata", "atb", "ate", "gma", "gmb",
+ "gmc", "gmd", "gpu";
+ nvidia,function = "gmi";
+ };
+ atc {
+ nvidia,pins = "atc", "atd";
+ nvidia,function = "sdio4";
+ };
+ cdev1 {
+ nvidia,pins = "cdev1";
+ nvidia,function = "plla_out";
+ };
+ cdev2 {
+ nvidia,pins = "cdev2";
+ nvidia,function = "osc";
+ };
+ crtp {
+ nvidia,pins = "crtp";
+ nvidia,function = "crt";
+ };
+ csus {
+ nvidia,pins = "csus";
+ nvidia,function = "vi_sensor_clk";
+ };
+ dap1 {
+ nvidia,pins = "dap1";
+ nvidia,function = "dap1";
+ };
+ dap2 {
+ nvidia,pins = "dap2";
+ nvidia,function = "dap2";
+ };
+ dap3 {
+ nvidia,pins = "dap3";
+ nvidia,function = "dap3";
+ };
+ dap4 {
+ nvidia,pins = "dap4";
+ nvidia,function = "dap4";
+ };
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "i2c2";
+ };
+ dta {
+ nvidia,pins = "dta", "dtb", "dtc", "dtd";
+ nvidia,function = "vi";
+ };
+ dte {
+ nvidia,pins = "dte";
+ nvidia,function = "rsvd1";
+ };
+ dtf {
+ nvidia,pins = "dtf";
+ nvidia,function = "i2c3";
+ };
+ gme {
+ nvidia,pins = "gme";
+ nvidia,function = "dap5";
+ };
+ gpu7 {
+ nvidia,pins = "gpu7";
+ nvidia,function = "rtck";
+ };
+ gpv {
+ nvidia,pins = "gpv";
+ nvidia,function = "pcie";
+ };
+ hdint {
+ nvidia,pins = "hdint", "pta";
+ nvidia,function = "hdmi";
+ };
+ i2cp {
+ nvidia,pins = "i2cp";
+ nvidia,function = "i2cp";
+ };
+ irrx {
+ nvidia,pins = "irrx", "irtx";
+ nvidia,function = "uartb";
+ };
+ kbca {
+ nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
+ nvidia,function = "kbc";
+ };
+ kbcb {
+ nvidia,pins = "kbcb", "kbcd";
+ nvidia,function = "sdio2";
+ };
+ lcsn {
+ nvidia,pins = "lcsn", "lsck", "lsda", "lsdi",
+ "spia", "spib", "spic";
+ nvidia,function = "spi3";
+ };
+ ld0 {
+ nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+ "ld5", "ld6", "ld7", "ld8", "ld9",
+ "ld10", "ld11", "ld12", "ld13", "ld14",
+ "ld15", "ld16", "ld17", "ldc", "ldi",
+ "lhp0", "lhp1", "lhp2", "lhs", "lm0",
+ "lm1", "lpp", "lpw0", "lpw1", "lpw2",
+ "lsc0", "lsc1", "lspi", "lvp0", "lvp1",
+ "lvs";
+ nvidia,function = "displaya";
+ };
+ owc {
+ nvidia,pins = "owc", "uac";
+ nvidia,function = "owr";
+ };
+ pmc {
+ nvidia,pins = "pmc";
+ nvidia,function = "pwr_on";
+ };
+ rm {
+ nvidia,pins = "rm";
+ nvidia,function = "i2c1";
+ };
+ sdb {
+ nvidia,pins = "sdb", "sdc", "sdd", "slxa",
+ "slxc", "slxd", "slxk";
+ nvidia,function = "sdio3";
+ };
+ sdio1 {
+ nvidia,pins = "sdio1";
+ nvidia,function = "sdio1";
+ };
+ spdi {
+ nvidia,pins = "spdi", "spdo";
+ nvidia,function = "rsvd2";
+ };
+ spid {
+ nvidia,pins = "spid", "spie", "spig", "spih";
+ nvidia,function = "spi2_alt";
+ };
+ spif {
+ nvidia,pins = "spif";
+ nvidia,function = "spi2";
+ };
+ uaa {
+ nvidia,pins = "uaa", "uab";
+ nvidia,function = "uarta";
+ };
+ uad {
+ nvidia,pins = "uad";
+ nvidia,function = "irda";
+ };
+ uca {
+ nvidia,pins = "uca", "ucb";
+ nvidia,function = "uartc";
+ };
+ uda {
+ nvidia,pins = "uda";
+ nvidia,function = "spi1";
+ };
+ conf_ata {
+ nvidia,pins = "ata", "atb", "atc", "ddc", "gma",
+ "gmb", "gmc", "gmd", "irrx", "irtx",
+ "kbca", "kbcb", "kbcc", "kbcd", "kbce",
+ "kbcf", "sdc", "sdd", "spie", "spig",
+ "spih", "uaa", "uab", "uad", "uca",
+ "ucb";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ conf_atd {
+ nvidia,pins = "atd", "ate", "cdev1", "csus",
+ "dap1", "dap2", "dap3", "dap4", "dte",
+ "dtf", "gpu", "gpu7", "gpv", "i2cp",
+ "rm", "sdio1", "slxa", "slxc", "slxd",
+ "slxk", "spdi", "spdo", "uac", "uda";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ conf_cdev2 {
+ nvidia,pins = "cdev2", "spia", "spib";
+ nvidia,pull = <1>;
+ nvidia,tristate = <1>;
+ };
+ conf_ck32 {
+ nvidia,pins = "ck32", "ddrc", "lc", "pmca",
+ "pmcb", "pmcc", "pmcd", "xm2c",
+ "xm2d";
+ nvidia,pull = <0>;
+ };
+ conf_crtp {
+ nvidia,pins = "crtp";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ conf_dta {
+ nvidia,pins = "dta", "dtb", "dtc", "dtd",
+ "spid", "spif";
+ nvidia,pull = <1>;
+ nvidia,tristate = <0>;
+ };
+ conf_gme {
+ nvidia,pins = "gme", "owc", "pta", "spic";
+ nvidia,pull = <2>;
+ nvidia,tristate = <1>;
+ };
+ conf_ld17_0 {
+ nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+ "ld23_22";
+ nvidia,pull = <1>;
+ };
+ conf_ls {
+ nvidia,pins = "ls", "pmce";
+ nvidia,pull = <2>;
+ };
+ drive_dap1 {
+ nvidia,pins = "drive_dap1";
+ nvidia,high-speed-mode = <0>;
+ nvidia,schmitt = <1>;
+ nvidia,low-power-mode = <0>;
+ nvidia,pull-down-strength = <0>;
+ nvidia,pull-up-strength = <0>;
+ nvidia,slew-rate-rising = <0>;
+ nvidia,slew-rate-falling = <0>;
+ };
+ };
+ };
+
+ i2s@70002800 {
+ status = "okay";
+ };
+
+ serial@70006000 {
+ status = "okay";
+ clock-frequency = <216000000>;
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ codec: codec@1a {
+ compatible = "wlf,wm8753";
+ reg = <0x1a>;
+ };
+
+ tca6416: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ usb@c5000000 {
+ status = "okay";
+ nvidia,vbus-gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
+ };
+
+ usb@c5008000 {
+ status = "okay";
+ nvidia,vbus-gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
+ };
+
+ sdhci@c8000400 {
+ status = "okay";
+ wp-gpios = <&gpio 173 0>; /* gpio PV5 */
+ bus-width = <8>;
+ };
+
+ sdhci@c8000600 {
+ status = "okay";
+ bus-width = <8>;
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-wm8753-whistler",
+ "nvidia,tegra-audio-wm8753";
+ nvidia,model = "NVIDIA Tegra Whistler";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "LOUT1",
+ "Headphone Jack", "ROUT1",
+ "MIC2", "Mic Jack",
+ "MIC2N", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&codec>;
+ };
+};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index c417d67..9f19216 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -72,7 +72,7 @@
reg = <0x70002800 0x200>;
interrupts = <0 13 0x04>;
nvidia,dma-request-selector = <&apbdma 2>;
- status = "disable";
+ status = "disabled";
};
tegra_i2s2: i2s@70002a00 {
@@ -80,7 +80,7 @@
reg = <0x70002a00 0x200>;
interrupts = <0 3 0x04>;
nvidia,dma-request-selector = <&apbdma 1>;
- status = "disable";
+ status = "disabled";
};
serial@70006000 {
@@ -88,7 +88,7 @@
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
- status = "disable";
+ status = "disabled";
};
serial@70006040 {
@@ -96,7 +96,7 @@
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <0 37 0x04>;
- status = "disable";
+ status = "disabled";
};
serial@70006200 {
@@ -104,7 +104,7 @@
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <0 46 0x04>;
- status = "disable";
+ status = "disabled";
};
serial@70006300 {
@@ -112,7 +112,7 @@
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <0 90 0x04>;
- status = "disable";
+ status = "disabled";
};
serial@70006400 {
@@ -120,7 +120,7 @@
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <0 91 0x04>;
- status = "disable";
+ status = "disabled";
};
i2c@7000c000 {
@@ -129,7 +129,7 @@
interrupts = <0 38 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
i2c@7000c400 {
@@ -138,7 +138,7 @@
interrupts = <0 84 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
i2c@7000c500 {
@@ -147,7 +147,7 @@
interrupts = <0 92 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
i2c@7000d000 {
@@ -156,7 +156,7 @@
interrupts = <0 53 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
pmc {
@@ -164,7 +164,7 @@
reg = <0x7000e400 0x400>;
};
- mc {
+ memory-controller@0x7000f000 {
compatible = "nvidia,tegra20-mc";
reg = <0x7000f000 0x024
0x7000f03c 0x3c4>;
@@ -177,7 +177,7 @@
0x58000000 0x02000000>; /* GART aperture */
};
- emc {
+ memory-controller@0x7000f400 {
compatible = "nvidia,tegra20-emc";
reg = <0x7000f400 0x200>;
#address-cells = <1>;
@@ -190,7 +190,7 @@
interrupts = <0 20 0x04>;
phy_type = "utmi";
nvidia,has-legacy-mode;
- status = "disable";
+ status = "disabled";
};
usb@c5004000 {
@@ -198,7 +198,7 @@
reg = <0xc5004000 0x4000>;
interrupts = <0 21 0x04>;
phy_type = "ulpi";
- status = "disable";
+ status = "disabled";
};
usb@c5008000 {
@@ -206,35 +206,35 @@
reg = <0xc5008000 0x4000>;
interrupts = <0 97 0x04>;
phy_type = "utmi";
- status = "disable";
+ status = "disabled";
};
sdhci@c8000000 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000000 0x200>;
interrupts = <0 14 0x04>;
- status = "disable";
+ status = "disabled";
};
sdhci@c8000200 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000200 0x200>;
interrupts = <0 15 0x04>;
- status = "disable";
+ status = "disabled";
};
sdhci@c8000400 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000400 0x200>;
interrupts = <0 19 0x04>;
- status = "disable";
+ status = "disabled";
};
sdhci@c8000600 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000600 0x200>;
interrupts = <0 31 0x04>;
- status = "disable";
+ status = "disabled";
};
pmu {
diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra30-cardhu.dts
similarity index 99%
rename from arch/arm/boot/dts/tegra-cardhu.dts
rename to arch/arm/boot/dts/tegra30-cardhu.dts
index 36321bc..c169bce 100644
--- a/arch/arm/boot/dts/tegra-cardhu.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu.dts
@@ -144,7 +144,6 @@
sdhci@78000600 {
status = "okay";
- support-8bit;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 2dcc09e..da74019 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -82,7 +82,7 @@
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
- status = "disable";
+ status = "disabled";
};
serial@70006040 {
@@ -90,7 +90,7 @@
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <0 37 0x04>;
- status = "disable";
+ status = "disabled";
};
serial@70006200 {
@@ -98,7 +98,7 @@
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <0 46 0x04>;
- status = "disable";
+ status = "disabled";
};
serial@70006300 {
@@ -106,7 +106,7 @@
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <0 90 0x04>;
- status = "disable";
+ status = "disabled";
};
serial@70006400 {
@@ -114,7 +114,7 @@
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <0 91 0x04>;
- status = "disable";
+ status = "disabled";
};
i2c@7000c000 {
@@ -123,7 +123,7 @@
interrupts = <0 38 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
i2c@7000c400 {
@@ -132,7 +132,7 @@
interrupts = <0 84 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
i2c@7000c500 {
@@ -141,7 +141,7 @@
interrupts = <0 92 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
i2c@7000c700 {
@@ -150,7 +150,7 @@
interrupts = <0 120 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
i2c@7000d000 {
@@ -159,7 +159,7 @@
interrupts = <0 53 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
pmc {
@@ -167,7 +167,7 @@
reg = <0x7000e400 0x400>;
};
- mc {
+ memory-controller {
compatible = "nvidia,tegra30-mc";
reg = <0x7000f000 0x010
0x7000f03c 0x1b4
@@ -201,35 +201,35 @@
compatible = "nvidia,tegra30-i2s";
reg = <0x70080300 0x100>;
nvidia,ahub-cif-ids = <4 4>;
- status = "disable";
+ status = "disabled";
};
tegra_i2s1: i2s@70080400 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080400 0x100>;
nvidia,ahub-cif-ids = <5 5>;
- status = "disable";
+ status = "disabled";
};
tegra_i2s2: i2s@70080500 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080500 0x100>;
nvidia,ahub-cif-ids = <6 6>;
- status = "disable";
+ status = "disabled";
};
tegra_i2s3: i2s@70080600 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080600 0x100>;
nvidia,ahub-cif-ids = <7 7>;
- status = "disable";
+ status = "disabled";
};
tegra_i2s4: i2s@70080700 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080700 0x100>;
nvidia,ahub-cif-ids = <8 8>;
- status = "disable";
+ status = "disabled";
};
};
@@ -237,28 +237,28 @@
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000000 0x200>;
interrupts = <0 14 0x04>;
- status = "disable";
+ status = "disabled";
};
sdhci@78000200 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000200 0x200>;
interrupts = <0 15 0x04>;
- status = "disable";
+ status = "disabled";
};
sdhci@78000400 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000400 0x200>;
interrupts = <0 19 0x04>;
- status = "disable";
+ status = "disabled";
};
sdhci@78000600 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000600 0x200>;
interrupts = <0 31 0x04>;
- status = "disable";
+ status = "disabled";
};
pmu {
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 16076e2..d8a827b 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -55,6 +55,8 @@
reg-io-width = <4>;
smsc,irq-active-high;
smsc,irq-push-pull;
+ vdd33a-supply = <&v2m_fixed_3v3>;
+ vddvario-supply = <&v2m_fixed_3v3>;
};
usb@2,03000000 {
@@ -157,6 +159,7 @@
v2m_timer23: timer@120000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x120000 0x1000>;
+ interrupts = <3>;
};
/* DVI I2C bus */
@@ -197,5 +200,13 @@
interrupts = <14>;
};
};
+
+ v2m_fixed_3v3: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
};
};
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index a6c9c7c..dba53fd 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -54,6 +54,8 @@
reg-io-width = <4>;
smsc,irq-active-high;
smsc,irq-push-pull;
+ vdd33a-supply = <&v2m_fixed_3v3>;
+ vddvario-supply = <&v2m_fixed_3v3>;
};
usb@3,03000000 {
@@ -156,6 +158,7 @@
v2m_timer23: timer@12000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x12000 0x1000>;
+ interrupts = <3>;
};
/* DVI I2C bus */
@@ -196,5 +199,13 @@
interrupts = <14>;
};
};
+
+ v2m_fixed_3v3: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
};
};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index 7e1091d..d12b34c 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -14,8 +14,8 @@
arm,hbi = <0x237>;
compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress";
interrupt-parent = <&gic>;
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
chosen { };
@@ -47,23 +47,23 @@
memory@80000000 {
device_type = "memory";
- reg = <0x80000000 0x40000000>;
+ reg = <0 0x80000000 0 0x40000000>;
};
hdlcd@2b000000 {
compatible = "arm,hdlcd";
- reg = <0x2b000000 0x1000>;
+ reg = <0 0x2b000000 0 0x1000>;
interrupts = <0 85 4>;
};
memory-controller@2b0a0000 {
compatible = "arm,pl341", "arm,primecell";
- reg = <0x2b0a0000 0x1000>;
+ reg = <0 0x2b0a0000 0 0x1000>;
};
wdt@2b060000 {
compatible = "arm,sp805", "arm,primecell";
- reg = <0x2b060000 0x1000>;
+ reg = <0 0x2b060000 0 0x1000>;
interrupts = <98>;
};
@@ -72,23 +72,23 @@
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
- reg = <0x2c001000 0x1000>,
- <0x2c002000 0x1000>,
- <0x2c004000 0x2000>,
- <0x2c006000 0x2000>;
+ reg = <0 0x2c001000 0 0x1000>,
+ <0 0x2c002000 0 0x1000>,
+ <0 0x2c004000 0 0x2000>,
+ <0 0x2c006000 0 0x2000>;
interrupts = <1 9 0xf04>;
};
memory-controller@7ffd0000 {
compatible = "arm,pl354", "arm,primecell";
- reg = <0x7ffd0000 0x1000>;
+ reg = <0 0x7ffd0000 0 0x1000>;
interrupts = <0 86 4>,
<0 87 4>;
};
dma@7ffb0000 {
compatible = "arm,pl330", "arm,primecell";
- reg = <0x7ffb0000 0x1000>;
+ reg = <0 0x7ffb0000 0 0x1000>;
interrupts = <0 92 4>,
<0 88 4>,
<0 89 4>,
@@ -111,12 +111,12 @@
};
motherboard {
- ranges = <0 0 0x08000000 0x04000000>,
- <1 0 0x14000000 0x04000000>,
- <2 0 0x18000000 0x04000000>,
- <3 0 0x1c000000 0x04000000>,
- <4 0 0x0c000000 0x04000000>,
- <5 0 0x10000000 0x04000000>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
interrupt-map-mask = <0 0 63>;
interrupt-map = <0 0 0 &gic 0 0 4>,
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
new file mode 100644
index 0000000..4890a81
--- /dev/null
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -0,0 +1,188 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A15x2 A7x3
+ * Cortex-A15_A7 MPCore (V2P-CA15_A7)
+ *
+ * HBI-0249A
+ */
+
+/dts-v1/;
+
+/ {
+ model = "V2P-CA15_CA7";
+ arm,hbi = <0x249>;
+ compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ i2c0 = &v2m_i2c_dvi;
+ i2c1 = &v2m_i2c_pcie;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ };
+
+/* A7s disabled till big.LITTLE patches are available...
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x100>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x101>;
+ };
+
+ cpu4: cpu@4 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x102>;
+ };
+*/
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+
+ wdt@2a490000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0 0x2a490000 0 0x1000>;
+ interrupts = <98>;
+ };
+
+ hdlcd@2b000000 {
+ compatible = "arm,hdlcd";
+ reg = <0 0x2b000000 0 0x1000>;
+ interrupts = <0 85 4>;
+ };
+
+ memory-controller@2b0a0000 {
+ compatible = "arm,pl341", "arm,primecell";
+ reg = <0 0x2b0a0000 0 0x1000>;
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0x2c001000 0 0x1000>,
+ <0 0x2c002000 0 0x1000>,
+ <0 0x2c004000 0 0x2000>,
+ <0 0x2c006000 0 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ memory-controller@7ffd0000 {
+ compatible = "arm,pl354", "arm,primecell";
+ reg = <0 0x7ffd0000 0 0x1000>;
+ interrupts = <0 86 4>,
+ <0 87 4>;
+ };
+
+ dma@7ff00000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0 0x7ff00000 0 0x1000>;
+ interrupts = <0 92 4>,
+ <0 88 4>,
+ <0 89 4>,
+ <0 90 4>,
+ <0 91 4>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
+ interrupts = <0 68 4>,
+ <0 69 4>;
+ };
+
+ motherboard {
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic 0 0 4>,
+ <0 0 1 &gic 0 1 4>,
+ <0 0 2 &gic 0 2 4>,
+ <0 0 3 &gic 0 3 4>,
+ <0 0 4 &gic 0 4 4>,
+ <0 0 5 &gic 0 5 4>,
+ <0 0 6 &gic 0 6 4>,
+ <0 0 7 &gic 0 7 4>,
+ <0 0 8 &gic 0 8 4>,
+ <0 0 9 &gic 0 9 4>,
+ <0 0 10 &gic 0 10 4>,
+ <0 0 11 &gic 0 11 4>,
+ <0 0 12 &gic 0 12 4>,
+ <0 0 13 &gic 0 13 4>,
+ <0 0 14 &gic 0 14 4>,
+ <0 0 15 &gic 0 15 4>,
+ <0 0 16 &gic 0 16 4>,
+ <0 0 17 &gic 0 17 4>,
+ <0 0 18 &gic 0 18 4>,
+ <0 0 19 &gic 0 19 4>,
+ <0 0 20 &gic 0 20 4>,
+ <0 0 21 &gic 0 21 4>,
+ <0 0 22 &gic 0 22 4>,
+ <0 0 23 &gic 0 23 4>,
+ <0 0 24 &gic 0 24 4>,
+ <0 0 25 &gic 0 25 4>,
+ <0 0 26 &gic 0 26 4>,
+ <0 0 27 &gic 0 27 4>,
+ <0 0 28 &gic 0 28 4>,
+ <0 0 29 &gic 0 29 4>,
+ <0 0 30 &gic 0 30 4>,
+ <0 0 31 &gic 0 31 4>,
+ <0 0 32 &gic 0 32 4>,
+ <0 0 33 &gic 0 33 4>,
+ <0 0 34 &gic 0 34 4>,
+ <0 0 35 &gic 0 35 4>,
+ <0 0 36 &gic 0 36 4>,
+ <0 0 37 &gic 0 37 4>,
+ <0 0 38 &gic 0 38 4>,
+ <0 0 39 &gic 0 39 4>,
+ <0 0 40 &gic 0 40 4>,
+ <0 0 41 &gic 0 41 4>,
+ <0 0 42 &gic 0 42 4>;
+ };
+};
+
+/include/ "vexpress-v2m-rs1.dtsi"
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 9d7eb53..aa07f59 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -366,8 +366,8 @@
struct safe_buffer *buf;
unsigned long off;
- dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
- __func__, addr, off, sz, dir);
+ dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
+ __func__, addr, sz, dir);
buf = find_safe_buffer_dev(dev, addr, __func__);
if (!buf)
@@ -377,8 +377,8 @@
BUG_ON(buf->direction != dir);
- dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
- __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+ dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
+ __func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
buf->safe, buf->safe_dma_addr);
DO_STATS(dev->archdata.dmabounce->bounce_count++);
@@ -406,8 +406,8 @@
struct safe_buffer *buf;
unsigned long off;
- dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
- __func__, addr, off, sz, dir);
+ dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
+ __func__, addr, sz, dir);
buf = find_safe_buffer_dev(dev, addr, __func__);
if (!buf)
@@ -417,8 +417,8 @@
BUG_ON(buf->direction != dir);
- dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
- __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+ dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
+ __func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
buf->safe, buf->safe_dma_addr);
DO_STATS(dev->archdata.dmabounce->bounce_count++);
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
new file mode 100644
index 0000000..e40b435d
--- /dev/null
+++ b/arch/arm/configs/exynos_defconfig
@@ -0,0 +1,92 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_EFI_PARTITION=y
+CONFIG_ARCH_EXYNOS=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C24XX_PWM=y
+CONFIG_ARCH_EXYNOS5=y
+CONFIG_MACH_EXYNOS4_DT=y
+CONFIG_MACH_EXYNOS5_DT=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_RFKILL_REGULATOR=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC911X=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC75XX=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+# CONFIG_HWMON is not set
+CONFIG_MFD_TPS65090=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_TPS65090=y
+CONFIG_FB=y
+CONFIG_EXYNOS_VIDEO=y
+CONFIG_EXYNOS_MIPI_DSI=y
+CONFIG_EXYNOS_DP=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_7x14=y
+CONFIG_LOGO=y
+CONFIG_USB=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index e05a2f1..78ed575 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -2,7 +2,10 @@
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
CONFIG_EXPERT=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
@@ -36,8 +39,6 @@
CONFIG_MACH_IMX27_DT=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -46,7 +47,6 @@
CONFIG_FPE_NWFPE_XP=y
CONFIG_PM_DEBUG=y
CONFIG_NET=y
-CONFIG_SMSC911X=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
@@ -70,31 +70,31 @@
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_CFI_I2 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_UBI=y
-CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
+CONFIG_ATA=y
+CONFIG_PATA_IMX=y
CONFIG_NETDEVICES=y
CONFIG_CS89x0=y
CONFIG_CS89x0_PLATFORM=y
CONFIG_DM9000=y
CONFIG_SMC91X=y
CONFIG_SMC911X=y
+CONFIG_SMSC911X=y
CONFIG_SMSC_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_KEYBOARD_IMX=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
-CONFIG_TOUCHSCREEN_MC13783=m
-# CONFIG_SERIO is not set
+CONFIG_TOUCHSCREEN_MC13783=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_IMX=y
@@ -113,31 +113,23 @@
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_WATCHDOG=y
CONFIG_IMX2_WDT=y
-CONFIG_MFD_MC13XXX=y
+CONFIG_MFD_MC13XXX_SPI=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_OV2640=y
+CONFIG_VIDEO_MX2=y
CONFIG_FB=y
CONFIG_FB_IMX=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_MEDIA=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_CONTIG=y
-CONFIG_VIDEOBUF2_CORE=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_OV2640=y
-CONFIG_VIDEO_MX2_HOSTSUPPORT=y
-CONFIG_VIDEO_MX2=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
@@ -152,13 +144,17 @@
CONFIG_SND_SOC_MX27VIS_AIC32X4=y
CONFIG_SND_SOC_PHYCORE_AC97=y
CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_SND_SOC_IMX_SGTL5000=y
+CONFIG_SND_SOC_IMX_MC13783=y
CONFIG_USB_HID=m
CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
CONFIG_USB_ULPI=y
CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_MXC=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -173,22 +169,25 @@
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_IMXDI=y
+CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_MXC=y
CONFIG_DMADEVICES=y
CONFIG_IMX_SDMA=y
CONFIG_IMX_DMA=y
+CONFIG_COMMON_CLK_DEBUG=y
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
# CONFIG_DNOTIFY is not set
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_UBIFS_FS=y
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=m
-CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index b1d3675..f725b96 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -2,6 +2,8 @@
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_KERNEL_LZO=y
CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_CGROUPS=y
CONFIG_RELAY=y
@@ -29,15 +31,12 @@
CONFIG_MACH_VPR200=y
CONFIG_MACH_IMX51_DT=y
CONFIG_MACH_MX51_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX51=y
CONFIG_MACH_EUKREA_CPUIMX51SD=y
CONFIG_MACH_MX51_EFIKAMX=y
CONFIG_MACH_MX51_EFIKASB=y
CONFIG_MACH_IMX53_DT=y
CONFIG_SOC_IMX6Q=y
CONFIG_MXC_PWM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_VMSPLIT_2G=y
CONFIG_PREEMPT_VOLUNTARY=y
@@ -64,17 +63,29 @@
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_CONNECTOR=y
CONFIG_MTD=y
-CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SST25L=y
-# CONFIG_STANDALONE is not set
-CONFIG_CONNECTOR=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
@@ -105,8 +116,11 @@
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_IMX=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MMA8450=y
CONFIG_SERIO_SERPORT=m
@@ -116,6 +130,7 @@
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_MXC_RNGA=y
CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
@@ -130,42 +145,37 @@
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_IMX2_WDT=y
-CONFIG_MFD_MC13XXX=y
+CONFIG_MFD_MC13XXX_SPI=y
+CONFIG_MFD_MC13XXX_I2C=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF2_CORE=y
-CONFIG_VIDEOBUF2_MEMOPS=y
-CONFIG_VIDEOBUF2_DMA_CONTIG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_OV2640=y
-CONFIG_MX3_VIDEO=y
CONFIG_VIDEO_MX3=y
CONFIG_FB=y
-CONFIG_FB_MX3=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_PHYCORE_AC97=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_SND_SOC_IMX_SGTL5000=y
+CONFIG_SND_SOC_IMX_MC13783=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
@@ -178,9 +188,12 @@
CONFIG_LEDS_CLASS=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_MXC=y
CONFIG_DMADEVICES=y
CONFIG_IMX_SDMA=y
+CONFIG_COMMON_CLK_DEBUG=y
+# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
@@ -204,8 +217,9 @@
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=m
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
@@ -216,14 +230,11 @@
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FTRACE is not set
# CONFIG_ARM_UNWIND is not set
CONFIG_SECURITYFS=y
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_CCITT=m
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index 4fa6054..e42a0e3 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -1,5 +1,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
@@ -16,8 +18,7 @@
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_LPC32XX=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -52,13 +53,17 @@
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
+CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_SLC_LPC32XX=y
+CONFIG_MTD_NAND_MLC_LPC32XX=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
@@ -79,16 +84,23 @@
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_SMSC_PHY=y
# CONFIG_WLAN is not set
+CONFIG_INPUT_MATRIXKMAP=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_LPC32XX=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_LPC32XX=y
+CONFIG_SERIO_LIBPS2=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_HS_LPC32XX=y
+CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
@@ -96,7 +108,8 @@
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
+CONFIG_SENSORS_DS620=y
+CONFIG_SENSORS_MAX6639=y
CONFIG_WATCHDOG=y
CONFIG_PNX4008_WATCHDOG=y
CONFIG_FB=y
@@ -133,6 +146,8 @@
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_PCA9532=y
+CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
@@ -146,10 +161,10 @@
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_LPC32XX=y
CONFIG_DMADEVICES=y
-CONFIG_AMBA_PL08X=y
CONFIG_STAGING=y
-CONFIG_IIO=y
CONFIG_LPC32XX_ADC=y
+CONFIG_MAX517=y
+CONFIG_IIO=y
CONFIG_EXT2_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
@@ -159,7 +174,6 @@
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
new file mode 100644
index 0000000..2e86b31
--- /dev/null
+++ b/arch/arm/configs/mvebu_defconfig
@@ -0,0 +1,46 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_MACH_ARMADA_370_XP=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_USE_OF=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_VFP=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_UTF8=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 5406c23..ccdb635 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -28,6 +28,7 @@
CONFIG_MACH_STMP378X_DEVB=y
CONFIG_MACH_TX28=y
CONFIG_MACH_M28EVK=y
+CONFIG_MACH_APX4DEVKIT=y
# CONFIG_ARM_THUMB is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
@@ -58,6 +59,9 @@
CONFIG_DEVTMPFS=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
# CONFIG_BLK_DEV is not set
+CONFIG_MTD=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_GPMI_NAND=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ENC28J60=y
@@ -77,6 +81,7 @@
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_MXS_AUART=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set
@@ -109,8 +114,10 @@
CONFIG_MMC_MXS=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_STMP=y
CONFIG_DMADEVICES=y
CONFIG_MXS_DMA=y
+CONFIG_COMMON_CLK_DEBUG=y
CONFIG_EXT3_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_FSCACHE=m
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 9854ff4..b152de79 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -176,7 +176,6 @@
CONFIG_USB_DEVICEFS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBUSUAL=y
@@ -197,6 +196,7 @@
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
CONFIG_QUOTA=y
CONFIG_QFMT_V2=y
CONFIG_MSDOS_FS=y
@@ -236,3 +236,4 @@
CONFIG_CRC_ITU_T=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
+CONFIG_SOC_OMAP5=y
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
new file mode 100644
index 0000000..0ac1293d
--- /dev/null
+++ b/arch/arm/configs/socfpga_defconfig
@@ -0,0 +1,83 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CPUSETS=y
+CONFIG_NAMESPACES=y
+CONFIG_EMBEDDED=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_SOCFPGA=y
+CONFIG_MACH_SOCFPGA_CYCLONE5=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_VMSPLIT_2G=y
+CONFIG_NR_CPUS=2
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_STMMAC_ETH=y
+# CONFIG_STMMAC_PHY_ID_ZERO_WORKAROUND is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_DW=y
+# CONFIG_RTC_HCTOSYS is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_ENABLE_DEFAULT_TRACERS=y
+CONFIG_DEBUG_USER=y
+CONFIG_XZ_DEC=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 1198dd6..4be9c1e 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -1,4 +1,6 @@
CONFIG_EXPERIMENTAL=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CGROUPS=y
@@ -25,14 +27,9 @@
CONFIG_ARCH_TEGRA_2x_SOC=y
CONFIG_ARCH_TEGRA_3x_SOC=y
CONFIG_MACH_HARMONY=y
-CONFIG_MACH_KAEN=y
CONFIG_MACH_PAZ00=y
CONFIG_MACH_TRIMSLICE=y
-CONFIG_MACH_WARIO=y
-CONFIG_MACH_VENTANA=y
CONFIG_TEGRA_EMC_SCALING_ENABLE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
@@ -103,19 +100,24 @@
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_TEGRA=y
CONFIG_SPI=y
CONFIG_SPI_TEGRA=y
+CONFIG_GPIO_TPS65910=y
CONFIG_POWER_SUPPLY=y
CONFIG_BATTERY_SBS=y
CONFIG_SENSORS_LM90=y
CONFIG_MFD_TPS6586X=y
+CONFIG_MFD_TPS65910=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS6586X=y
+CONFIG_REGULATOR_TPS65910=y
CONFIG_SOUND=y
CONFIG_SND=y
# CONFIG_SND_SUPPORT_OLD_API is not set
@@ -126,6 +128,7 @@
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_TEGRA=y
+CONFIG_SND_SOC_TEGRA_WM8753=y
CONFIG_SND_SOC_TEGRA_WM8903=y
CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
CONFIG_SND_SOC_TEGRA_ALC5632=y
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 68374ba..c79f61f 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -243,7 +243,7 @@
#define ATOMIC64_INIT(i) { (i) }
-static inline u64 atomic64_read(atomic64_t *v)
+static inline u64 atomic64_read(const atomic64_t *v)
{
u64 result;
diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h
index 3d22204..6ddbe44 100644
--- a/arch/arm/include/asm/domain.h
+++ b/arch/arm/include/asm/domain.h
@@ -60,13 +60,13 @@
#ifndef __ASSEMBLY__
#ifdef CONFIG_CPU_USE_DOMAINS
-#define set_domain(x) \
- do { \
- __asm__ __volatile__( \
- "mcr p15, 0, %0, c3, c0 @ set domain" \
- : : "r" (x)); \
- isb(); \
- } while (0)
+static inline void set_domain(unsigned val)
+{
+ asm volatile(
+ "mcr p15, 0, %0, c3, c0 @ set domain"
+ : : "r" (val));
+ isb();
+}
#define modify_domain(dom,type) \
do { \
@@ -78,8 +78,8 @@
} while (0)
#else
-#define set_domain(x) do { } while (0)
-#define modify_domain(dom,type) do { } while (0)
+static inline void set_domain(unsigned val) { }
+static inline void modify_domain(unsigned dom, unsigned type) { }
#endif
/*
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 7be5469..e42cf59 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -19,6 +19,7 @@
" .long 1b, 4f, 2b, 4f\n" \
" .popsection\n" \
" .pushsection .fixup,\"ax\"\n" \
+ " .align 2\n" \
"4: mov %0, " err_reg "\n" \
" b 3b\n" \
" .popsection"
diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h
index e0d1c0c..6b9b077 100644
--- a/arch/arm/include/asm/hardware/sp810.h
+++ b/arch/arm/include/asm/hardware/sp810.h
@@ -4,7 +4,7 @@
* ARM PrimeXsys System Controller SP810 header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
index febe495..15cb035 100644
--- a/arch/arm/include/asm/mach/irq.h
+++ b/arch/arm/include/asm/mach/irq.h
@@ -17,7 +17,7 @@
/*
* This is internal. Do not use it.
*/
-extern void init_FIQ(void);
+extern void init_FIQ(int);
extern int show_fiq_list(struct seq_file *, int);
#ifdef CONFIG_MULTI_IRQ_HANDLER
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index b79f8e9..af7b0bd 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -148,7 +148,6 @@
#define TIF_NOTIFY_RESUME 2 /* callback before returning to user */
#define TIF_SYSCALL_TRACE 8
#define TIF_SYSCALL_AUDIT 9
-#define TIF_SYSCALL_RESTARTSYS 10
#define TIF_POLLING_NRFLAG 16
#define TIF_USING_IWMMXT 17
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
@@ -164,11 +163,9 @@
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT)
#define _TIF_SECCOMP (1 << TIF_SECCOMP)
-#define _TIF_SYSCALL_RESTARTSYS (1 << TIF_SYSCALL_RESTARTSYS)
/* Checks for any syscall work in entry-common.S */
-#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
- _TIF_SYSCALL_RESTARTSYS)
+#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
/*
* Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 437f0c4..0d1851c 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -495,6 +495,7 @@
* The out of line fixup for the ldrt above.
*/
.pushsection .fixup, "ax"
+ .align 2
4: mov pc, r9
.popsection
.pushsection __ex_table,"a"
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index c32f845..2adda11 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -122,14 +122,16 @@
while (current_fiq->fiq_op(current_fiq->dev_id, 0));
}
+static int fiq_start;
+
void enable_fiq(int fiq)
{
- enable_irq(fiq + FIQ_START);
+ enable_irq(fiq + fiq_start);
}
void disable_fiq(int fiq)
{
- disable_irq(fiq + FIQ_START);
+ disable_irq(fiq + fiq_start);
}
EXPORT_SYMBOL(set_fiq_handler);
@@ -140,7 +142,8 @@
EXPORT_SYMBOL(enable_fiq);
EXPORT_SYMBOL(disable_fiq);
-void __init init_FIQ(void)
+void __init init_FIQ(int start)
{
no_fiq_insn = *(unsigned long *)0xffff001c;
+ fiq_start = start;
}
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 8349d4e97..16cedb4 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -40,13 +40,6 @@
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-/*
- * No architecture-specific irq_finish function defined in arm/arch/irqs.h.
- */
-#ifndef irq_finish
-#define irq_finish(irq) do { } while (0)
-#endif
-
unsigned long irq_err_count;
int arch_show_interrupts(struct seq_file *p, int prec)
@@ -85,9 +78,6 @@
generic_handle_irq(irq);
}
- /* AT91 specific workaround */
- irq_finish(irq);
-
irq_exit();
set_irq_regs(old_regs);
}
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
index ba32b39..38c1a3b 100644
--- a/arch/arm/kernel/kprobes-test-arm.c
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -187,8 +187,8 @@
TEST_BF_R ("mov pc, r",0,2f,"")
TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"")
TEST_BB( "sub pc, pc, #1b-2b+8")
-#if __LINUX_ARM_ARCH__ >= 6
- TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */
+#if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7)
+ TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */
#endif
TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"")
TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc")
diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c
index 8f96ec7..6123daf 100644
--- a/arch/arm/kernel/kprobes-thumb.c
+++ b/arch/arm/kernel/kprobes-thumb.c
@@ -660,7 +660,7 @@
/* LDRSB (literal) 1111 1001 x001 1111 xxxx xxxx xxxx xxxx */
/* LDRH (literal) 1111 1000 x011 1111 xxxx xxxx xxxx xxxx */
/* LDRSH (literal) 1111 1001 x011 1111 xxxx xxxx xxxx xxxx */
- DECODE_EMULATEX (0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
+ DECODE_SIMULATEX(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
REGS(PC, NOSPPCX, 0, 0, 0)),
/* STRB (immediate) 1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 186c8cb..a02eada 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -503,7 +503,7 @@
event_requires_mode_exclusion(&event->attr)) {
pr_debug("ARM performance counters do not support "
"mode exclusion\n");
- return -EPERM;
+ return -EOPNOTSUPP;
}
/*
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 5700a7a..14e3826 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -25,7 +25,6 @@
#include <linux/regset.h>
#include <linux/audit.h>
#include <linux/tracehook.h>
-#include <linux/unistd.h>
#include <asm/pgtable.h>
#include <asm/traps.h>
@@ -918,8 +917,6 @@
audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0,
regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
- if (why == 0 && test_and_clear_thread_flag(TIF_SYSCALL_RESTARTSYS))
- scno = __NR_restart_syscall - __NR_SYSCALL_BASE;
if (!test_thread_flag(TIF_SYSCALL_TRACE))
return scno;
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index fd2392a..536c5d6 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -27,6 +27,7 @@
*/
#define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
#define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
+#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE)
/*
* With EABI, the syscall number has to be loaded into r7.
@@ -47,6 +48,18 @@
};
/*
+ * Either we support OABI only, or we have EABI with the OABI
+ * compat layer enabled. In the later case we don't know if
+ * user space is EABI or not, and if not we must not clobber r7.
+ * Always using the OABI syscall solves that issue and works for
+ * all those cases.
+ */
+const unsigned long syscall_restart_code[2] = {
+ SWI_SYS_RESTART, /* swi __NR_restart_syscall */
+ 0xe49df004, /* ldr pc, [sp], #4 */
+};
+
+/*
* atomically swap in the new signal mask, and wait for a signal.
*/
asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
@@ -592,10 +605,12 @@
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
- case -ERESTART_RESTARTBLOCK:
regs->ARM_r0 = regs->ARM_ORIG_r0;
regs->ARM_pc = restart_addr;
break;
+ case -ERESTART_RESTARTBLOCK:
+ regs->ARM_r0 = -EINTR;
+ break;
}
}
@@ -611,14 +626,12 @@
* debugger has chosen to restart at a different PC.
*/
if (regs->ARM_pc == restart_addr) {
- if (retval == -ERESTARTNOHAND ||
- retval == -ERESTART_RESTARTBLOCK
+ if (retval == -ERESTARTNOHAND
|| (retval == -ERESTARTSYS
&& !(ka.sa.sa_flags & SA_RESTART))) {
regs->ARM_r0 = -EINTR;
regs->ARM_pc = continue_addr;
}
- clear_thread_flag(TIF_SYSCALL_RESTARTSYS);
}
handle_signal(signr, &ka, &info, regs);
@@ -632,8 +645,29 @@
* ignore the restart.
*/
if (retval == -ERESTART_RESTARTBLOCK
- && regs->ARM_pc == restart_addr)
- set_thread_flag(TIF_SYSCALL_RESTARTSYS);
+ && regs->ARM_pc == continue_addr) {
+ if (thumb_mode(regs)) {
+ regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
+ regs->ARM_pc -= 2;
+ } else {
+#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT)
+ regs->ARM_r7 = __NR_restart_syscall;
+ regs->ARM_pc -= 4;
+#else
+ u32 __user *usp;
+
+ regs->ARM_sp -= 4;
+ usp = (u32 __user *)regs->ARM_sp;
+
+ if (put_user(regs->ARM_pc, usp) == 0) {
+ regs->ARM_pc = KERN_RESTART_CODE;
+ } else {
+ regs->ARM_sp += 4;
+ force_sigsegv(0, current);
+ }
+#endif
+ }
+ }
}
restore_saved_sigmask();
diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h
index 5ff067b7..6fcfe83 100644
--- a/arch/arm/kernel/signal.h
+++ b/arch/arm/kernel/signal.h
@@ -8,5 +8,7 @@
* published by the Free Software Foundation.
*/
#define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500)
+#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
extern const unsigned long sigreturn_codes[7];
+extern const unsigned long syscall_restart_code[2];
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 4928d89..3647170 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -820,6 +820,8 @@
*/
memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE),
sigreturn_codes, sizeof(sigreturn_codes));
+ memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE),
+ syscall_restart_code, sizeof(syscall_restart_code));
flush_icache_range(vectors, vectors + PAGE_SIZE);
modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 43a31fb..36ff15b 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -183,7 +183,9 @@
}
#endif
+#ifdef CONFIG_SMP
PERCPU_SECTION(L1_CACHE_BYTES)
+#endif
#ifdef CONFIG_XIP_KERNEL
__data_loc = ALIGN(4); /* location in binary */
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 19505c0..c8050b1 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -29,12 +29,16 @@
config SOC_AT91SAM9
bool
select CPU_ARM926T
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
select AT91_SAM9_TIME
select AT91_SAM9_SMC
config SOC_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
@@ -140,6 +144,8 @@
config ARCH_AT91X40
bool "AT91x40"
depends on !MMU
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
select ARCH_USES_GETTIMEOFFSET
endchoice
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 9e84fe4..30bb733 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -15,7 +15,9 @@
# Keep dtb files sorted alphabetically for each SoC
# sam9260
+dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
# sam9263
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 2691768..6f50c67 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -17,6 +17,7 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91rm9200.h>
+#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
#include <mach/at91_st.h>
#include <mach/cpu.h>
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index e6b7d05..01fb732 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -41,8 +41,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91RM9200_ID_UHP,
- .end = AT91RM9200_ID_UHP,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_UHP,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_UHP,
.flags = IORESOURCE_IRQ,
},
};
@@ -94,8 +94,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91RM9200_ID_UDP,
- .end = AT91RM9200_ID_UDP,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_UDP,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_UDP,
.flags = IORESOURCE_IRQ,
},
};
@@ -145,8 +145,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91RM9200_ID_EMAC,
- .end = AT91RM9200_ID_EMAC,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_EMAC,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_EMAC,
.flags = IORESOURCE_IRQ,
},
};
@@ -305,8 +305,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91RM9200_ID_MCI,
- .end = AT91RM9200_ID_MCI,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_MCI,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_MCI,
.flags = IORESOURCE_IRQ,
},
};
@@ -488,8 +488,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91RM9200_ID_TWI,
- .end = AT91RM9200_ID_TWI,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_TWI,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_TWI,
.flags = IORESOURCE_IRQ,
},
};
@@ -532,8 +532,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91RM9200_ID_SPI,
- .end = AT91RM9200_ID_SPI,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_SPI,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_SPI,
.flags = IORESOURCE_IRQ,
},
};
@@ -598,18 +598,18 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91RM9200_ID_TC0,
- .end = AT91RM9200_ID_TC0,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC0,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC0,
.flags = IORESOURCE_IRQ,
},
[2] = {
- .start = AT91RM9200_ID_TC1,
- .end = AT91RM9200_ID_TC1,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC1,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC1,
.flags = IORESOURCE_IRQ,
},
[3] = {
- .start = AT91RM9200_ID_TC2,
- .end = AT91RM9200_ID_TC2,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC2,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC2,
.flags = IORESOURCE_IRQ,
},
};
@@ -628,18 +628,18 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91RM9200_ID_TC3,
- .end = AT91RM9200_ID_TC3,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC3,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC3,
.flags = IORESOURCE_IRQ,
},
[2] = {
- .start = AT91RM9200_ID_TC4,
- .end = AT91RM9200_ID_TC4,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC4,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC4,
.flags = IORESOURCE_IRQ,
},
[3] = {
- .start = AT91RM9200_ID_TC5,
- .end = AT91RM9200_ID_TC5,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC5,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC5,
.flags = IORESOURCE_IRQ,
},
};
@@ -673,8 +673,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
+ .start = NR_IRQS_LEGACY + AT91_ID_SYS,
+ .end = NR_IRQS_LEGACY + AT91_ID_SYS,
.flags = IORESOURCE_IRQ,
},
};
@@ -729,8 +729,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91RM9200_ID_SSC0,
- .end = AT91RM9200_ID_SSC0,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC0,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC0,
.flags = IORESOURCE_IRQ,
},
};
@@ -771,8 +771,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91RM9200_ID_SSC1,
- .end = AT91RM9200_ID_SSC1,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC1,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC1,
.flags = IORESOURCE_IRQ,
},
};
@@ -813,8 +813,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91RM9200_ID_SSC2,
- .end = AT91RM9200_ID_SSC2,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC2,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC2,
.flags = IORESOURCE_IRQ,
},
};
@@ -897,8 +897,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
+ .start = NR_IRQS_LEGACY + AT91_ID_SYS,
+ .end = NR_IRQS_LEGACY + AT91_ID_SYS,
.flags = IORESOURCE_IRQ,
},
};
@@ -935,8 +935,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91RM9200_ID_US0,
- .end = AT91RM9200_ID_US0,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_US0,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_US0,
.flags = IORESOURCE_IRQ,
},
};
@@ -984,8 +984,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91RM9200_ID_US1,
- .end = AT91RM9200_ID_US1,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_US1,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_US1,
.flags = IORESOURCE_IRQ,
},
};
@@ -1035,8 +1035,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91RM9200_ID_US2,
- .end = AT91RM9200_ID_US2,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_US2,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_US2,
.flags = IORESOURCE_IRQ,
},
};
@@ -1078,8 +1078,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91RM9200_ID_US3,
- .end = AT91RM9200_ID_US3,
+ .start = NR_IRQS_LEGACY + AT91RM9200_ID_US3,
+ .end = NR_IRQS_LEGACY + AT91RM9200_ID_US3,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 2b1e438..30c7f26 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -20,6 +20,7 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9260.h>
+#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 0ded951..7b9c2ba 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -45,8 +45,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_UHP,
- .end = AT91SAM9260_ID_UHP,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP,
.flags = IORESOURCE_IRQ,
},
};
@@ -98,8 +98,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_UDP,
- .end = AT91SAM9260_ID_UDP,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP,
.flags = IORESOURCE_IRQ,
},
};
@@ -149,8 +149,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_EMAC,
- .end = AT91SAM9260_ID_EMAC,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC,
.flags = IORESOURCE_IRQ,
},
};
@@ -223,8 +223,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_MCI,
- .end = AT91SAM9260_ID_MCI,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
.flags = IORESOURCE_IRQ,
},
};
@@ -305,8 +305,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_MCI,
- .end = AT91SAM9260_ID_MCI,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
.flags = IORESOURCE_IRQ,
},
};
@@ -496,8 +496,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_TWI,
- .end = AT91SAM9260_ID_TWI,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI,
.flags = IORESOURCE_IRQ,
},
};
@@ -540,8 +540,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_SPI0,
- .end = AT91SAM9260_ID_SPI0,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0,
.flags = IORESOURCE_IRQ,
},
};
@@ -566,8 +566,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_SPI1,
- .end = AT91SAM9260_ID_SPI1,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1,
.flags = IORESOURCE_IRQ,
},
};
@@ -652,18 +652,18 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_TC0,
- .end = AT91SAM9260_ID_TC0,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0,
.flags = IORESOURCE_IRQ,
},
[2] = {
- .start = AT91SAM9260_ID_TC1,
- .end = AT91SAM9260_ID_TC1,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1,
.flags = IORESOURCE_IRQ,
},
[3] = {
- .start = AT91SAM9260_ID_TC2,
- .end = AT91SAM9260_ID_TC2,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2,
.flags = IORESOURCE_IRQ,
},
};
@@ -682,18 +682,18 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_TC3,
- .end = AT91SAM9260_ID_TC3,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3,
.flags = IORESOURCE_IRQ,
},
[2] = {
- .start = AT91SAM9260_ID_TC4,
- .end = AT91SAM9260_ID_TC4,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4,
.flags = IORESOURCE_IRQ,
},
[3] = {
- .start = AT91SAM9260_ID_TC5,
- .end = AT91SAM9260_ID_TC5,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5,
.flags = IORESOURCE_IRQ,
},
};
@@ -807,8 +807,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_SSC,
- .end = AT91SAM9260_ID_SSC,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC,
.flags = IORESOURCE_IRQ,
},
};
@@ -882,8 +882,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
+ .start = NR_IRQS_LEGACY + AT91_ID_SYS,
+ .end = NR_IRQS_LEGACY + AT91_ID_SYS,
.flags = IORESOURCE_IRQ,
},
};
@@ -920,8 +920,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_US0,
- .end = AT91SAM9260_ID_US0,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US0,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US0,
.flags = IORESOURCE_IRQ,
},
};
@@ -971,8 +971,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_US1,
- .end = AT91SAM9260_ID_US1,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US1,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US1,
.flags = IORESOURCE_IRQ,
},
};
@@ -1014,8 +1014,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_US2,
- .end = AT91SAM9260_ID_US2,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US2,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US2,
.flags = IORESOURCE_IRQ,
},
};
@@ -1057,8 +1057,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_US3,
- .end = AT91SAM9260_ID_US3,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US3,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US3,
.flags = IORESOURCE_IRQ,
},
};
@@ -1100,8 +1100,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_US4,
- .end = AT91SAM9260_ID_US4,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US4,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US4,
.flags = IORESOURCE_IRQ,
},
};
@@ -1138,8 +1138,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_US5,
- .end = AT91SAM9260_ID_US5,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US5,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US5,
.flags = IORESOURCE_IRQ,
},
};
@@ -1357,8 +1357,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9260_ID_ADC,
- .end = AT91SAM9260_ID_ADC,
+ .start = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC,
+ .end = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index c77d503..f40762c 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -19,6 +19,7 @@
#include <asm/system_misc.h>
#include <mach/cpu.h>
#include <mach/at91sam9261.h>
+#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 9295e90..8df5c1bd 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -45,8 +45,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9261_ID_UHP,
- .end = AT91SAM9261_ID_UHP,
+ .start = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP,
+ .end = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP,
.flags = IORESOURCE_IRQ,
},
};
@@ -98,8 +98,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9261_ID_UDP,
- .end = AT91SAM9261_ID_UDP,
+ .start = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP,
+ .end = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP,
.flags = IORESOURCE_IRQ,
},
};
@@ -148,8 +148,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9261_ID_MCI,
- .end = AT91SAM9261_ID_MCI,
+ .start = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI,
+ .end = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI,
.flags = IORESOURCE_IRQ,
},
};
@@ -310,8 +310,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9261_ID_TWI,
- .end = AT91SAM9261_ID_TWI,
+ .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI,
+ .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI,
.flags = IORESOURCE_IRQ,
},
};
@@ -354,8 +354,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9261_ID_SPI0,
- .end = AT91SAM9261_ID_SPI0,
+ .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0,
+ .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0,
.flags = IORESOURCE_IRQ,
},
};
@@ -380,8 +380,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9261_ID_SPI1,
- .end = AT91SAM9261_ID_SPI1,
+ .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1,
+ .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1,
.flags = IORESOURCE_IRQ,
},
};
@@ -468,8 +468,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9261_ID_LCDC,
- .end = AT91SAM9261_ID_LCDC,
+ .start = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC,
+ .end = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC,
.flags = IORESOURCE_IRQ,
},
#if defined(CONFIG_FB_INTSRAM)
@@ -566,18 +566,18 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9261_ID_TC0,
- .end = AT91SAM9261_ID_TC0,
+ .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0,
+ .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0,
.flags = IORESOURCE_IRQ,
},
[2] = {
- .start = AT91SAM9261_ID_TC1,
- .end = AT91SAM9261_ID_TC1,
+ .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1,
+ .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1,
.flags = IORESOURCE_IRQ,
},
[3] = {
- .start = AT91SAM9261_ID_TC2,
- .end = AT91SAM9261_ID_TC2,
+ .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2,
+ .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2,
.flags = IORESOURCE_IRQ,
},
};
@@ -689,8 +689,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9261_ID_SSC0,
- .end = AT91SAM9261_ID_SSC0,
+ .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0,
+ .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0,
.flags = IORESOURCE_IRQ,
},
};
@@ -731,8 +731,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9261_ID_SSC1,
- .end = AT91SAM9261_ID_SSC1,
+ .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1,
+ .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1,
.flags = IORESOURCE_IRQ,
},
};
@@ -773,8 +773,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9261_ID_SSC2,
- .end = AT91SAM9261_ID_SSC2,
+ .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2,
+ .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2,
.flags = IORESOURCE_IRQ,
},
};
@@ -857,8 +857,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
+ .start = NR_IRQS_LEGACY + AT91_ID_SYS,
+ .end = NR_IRQS_LEGACY + AT91_ID_SYS,
.flags = IORESOURCE_IRQ,
},
};
@@ -895,8 +895,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9261_ID_US0,
- .end = AT91SAM9261_ID_US0,
+ .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US0,
+ .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US0,
.flags = IORESOURCE_IRQ,
},
};
@@ -938,8 +938,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9261_ID_US1,
- .end = AT91SAM9261_ID_US1,
+ .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US1,
+ .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US1,
.flags = IORESOURCE_IRQ,
},
};
@@ -981,8 +981,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9261_ID_US2,
- .end = AT91SAM9261_ID_US2,
+ .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US2,
+ .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US2,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index ed91c7e..84b3810 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -18,6 +18,7 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91sam9263.h>
+#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 175e000..eb6bbf8 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -44,8 +44,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_UHP,
- .end = AT91SAM9263_ID_UHP,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP,
.flags = IORESOURCE_IRQ,
},
};
@@ -104,8 +104,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_UDP,
- .end = AT91SAM9263_ID_UDP,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP,
.flags = IORESOURCE_IRQ,
},
};
@@ -155,8 +155,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_EMAC,
- .end = AT91SAM9263_ID_EMAC,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC,
.flags = IORESOURCE_IRQ,
},
};
@@ -229,8 +229,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_MCI0,
- .end = AT91SAM9263_ID_MCI0,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0,
.flags = IORESOURCE_IRQ,
},
};
@@ -254,8 +254,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_MCI1,
- .end = AT91SAM9263_ID_MCI1,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1,
.flags = IORESOURCE_IRQ,
},
};
@@ -567,8 +567,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_TWI,
- .end = AT91SAM9263_ID_TWI,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI,
.flags = IORESOURCE_IRQ,
},
};
@@ -611,8 +611,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_SPI0,
- .end = AT91SAM9263_ID_SPI0,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0,
.flags = IORESOURCE_IRQ,
},
};
@@ -637,8 +637,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_SPI1,
- .end = AT91SAM9263_ID_SPI1,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1,
.flags = IORESOURCE_IRQ,
},
};
@@ -725,8 +725,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_AC97C,
- .end = AT91SAM9263_ID_AC97C,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C,
.flags = IORESOURCE_IRQ,
},
};
@@ -776,8 +776,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_CAN,
- .end = AT91SAM9263_ID_CAN,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN,
.flags = IORESOURCE_IRQ,
},
};
@@ -816,8 +816,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_LCDC,
- .end = AT91SAM9263_ID_LCDC,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC,
.flags = IORESOURCE_IRQ,
},
};
@@ -883,8 +883,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_ISI,
- .end = AT91SAM9263_ID_ISI,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI,
.flags = IORESOURCE_IRQ,
},
};
@@ -940,8 +940,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_TCB,
- .end = AT91SAM9263_ID_TCB,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB,
.flags = IORESOURCE_IRQ,
},
};
@@ -1108,8 +1108,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_PWMC,
- .end = AT91SAM9263_ID_PWMC,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC,
.flags = IORESOURCE_IRQ,
},
};
@@ -1161,8 +1161,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_SSC0,
- .end = AT91SAM9263_ID_SSC0,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0,
.flags = IORESOURCE_IRQ,
},
};
@@ -1203,8 +1203,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_SSC1,
- .end = AT91SAM9263_ID_SSC1,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1,
.flags = IORESOURCE_IRQ,
},
};
@@ -1284,8 +1284,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
+ .start = NR_IRQS_LEGACY + AT91_ID_SYS,
+ .end = NR_IRQS_LEGACY + AT91_ID_SYS,
.flags = IORESOURCE_IRQ,
},
};
@@ -1322,8 +1322,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_US0,
- .end = AT91SAM9263_ID_US0,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US0,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US0,
.flags = IORESOURCE_IRQ,
},
};
@@ -1365,8 +1365,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_US1,
- .end = AT91SAM9263_ID_US1,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US1,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US1,
.flags = IORESOURCE_IRQ,
},
};
@@ -1408,8 +1408,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9263_ID_US2,
- .end = AT91SAM9263_ID_US2,
+ .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US2,
+ .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US2,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index a94758b..ffc0957 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -137,7 +137,7 @@
.name = "at91_tick",
.flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = at91sam926x_pit_interrupt,
- .irq = AT91_ID_SYS,
+ .irq = NR_IRQS_LEGACY + AT91_ID_SYS,
};
static void at91sam926x_pit_reset(void)
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 4792682..9771273 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -18,6 +18,7 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91sam9g45.h>
+#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 933fc9a..40fb79d 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -53,8 +53,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_DMA,
- .end = AT91SAM9G45_ID_DMA,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA,
.flags = IORESOURCE_IRQ,
},
};
@@ -94,8 +94,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_UHPHS,
- .end = AT91SAM9G45_ID_UHPHS,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
.flags = IORESOURCE_IRQ,
},
};
@@ -156,8 +156,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_UHPHS,
- .end = AT91SAM9G45_ID_UHPHS,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
.flags = IORESOURCE_IRQ,
},
};
@@ -213,8 +213,8 @@
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = AT91SAM9G45_ID_UDPHS,
- .end = AT91SAM9G45_ID_UDPHS,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS,
.flags = IORESOURCE_IRQ,
},
};
@@ -296,8 +296,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_EMAC,
- .end = AT91SAM9G45_ID_EMAC,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC,
.flags = IORESOURCE_IRQ,
},
};
@@ -370,8 +370,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_MCI0,
- .end = AT91SAM9G45_ID_MCI0,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0,
.flags = IORESOURCE_IRQ,
},
};
@@ -395,8 +395,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_MCI1,
- .end = AT91SAM9G45_ID_MCI1,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1,
.flags = IORESOURCE_IRQ,
},
};
@@ -645,8 +645,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_TWI0,
- .end = AT91SAM9G45_ID_TWI0,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0,
.flags = IORESOURCE_IRQ,
},
};
@@ -665,8 +665,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_TWI1,
- .end = AT91SAM9G45_ID_TWI1,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1,
.flags = IORESOURCE_IRQ,
},
};
@@ -720,8 +720,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_SPI0,
- .end = AT91SAM9G45_ID_SPI0,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0,
.flags = IORESOURCE_IRQ,
},
};
@@ -746,8 +746,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_SPI1,
- .end = AT91SAM9G45_ID_SPI1,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1,
.flags = IORESOURCE_IRQ,
},
};
@@ -834,8 +834,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_AC97C,
- .end = AT91SAM9G45_ID_AC97C,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C,
.flags = IORESOURCE_IRQ,
},
};
@@ -887,8 +887,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_ISI,
- .end = AT91SAM9G45_ID_ISI,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI,
.flags = IORESOURCE_IRQ,
},
};
@@ -979,8 +979,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_LCDC,
- .end = AT91SAM9G45_ID_LCDC,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC,
.flags = IORESOURCE_IRQ,
},
};
@@ -1054,8 +1054,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_TCB,
- .end = AT91SAM9G45_ID_TCB,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
.flags = IORESOURCE_IRQ,
},
};
@@ -1075,8 +1075,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_TCB,
- .end = AT91SAM9G45_ID_TCB,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
.flags = IORESOURCE_IRQ,
},
};
@@ -1110,8 +1110,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
+ .start = NR_IRQS_LEGACY + AT91_ID_SYS,
+ .end = NR_IRQS_LEGACY + AT91_ID_SYS,
.flags = IORESOURCE_IRQ,
},
};
@@ -1147,8 +1147,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_TSC,
- .end = AT91SAM9G45_ID_TSC,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
.flags = IORESOURCE_IRQ,
}
};
@@ -1197,8 +1197,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_TSC,
- .end = AT91SAM9G45_ID_TSC,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
.flags = IORESOURCE_IRQ,
}
};
@@ -1400,8 +1400,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_PWMC,
- .end = AT91SAM9G45_ID_PWMC,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC,
.flags = IORESOURCE_IRQ,
},
};
@@ -1453,8 +1453,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_SSC0,
- .end = AT91SAM9G45_ID_SSC0,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0,
.flags = IORESOURCE_IRQ,
},
};
@@ -1495,8 +1495,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_SSC1,
- .end = AT91SAM9G45_ID_SSC1,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1,
.flags = IORESOURCE_IRQ,
},
};
@@ -1575,8 +1575,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
+ .start = NR_IRQS_LEGACY + AT91_ID_SYS,
+ .end = NR_IRQS_LEGACY + AT91_ID_SYS,
.flags = IORESOURCE_IRQ,
},
};
@@ -1613,8 +1613,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_US0,
- .end = AT91SAM9G45_ID_US0,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0,
.flags = IORESOURCE_IRQ,
},
};
@@ -1656,8 +1656,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_US1,
- .end = AT91SAM9G45_ID_US1,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1,
.flags = IORESOURCE_IRQ,
},
};
@@ -1699,8 +1699,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_US2,
- .end = AT91SAM9G45_ID_US2,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2,
.flags = IORESOURCE_IRQ,
},
};
@@ -1742,8 +1742,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_US3,
- .end = AT91SAM9G45_ID_US3,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index e420085..72ce50a 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -19,6 +19,7 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9rl.h>
+#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 9c0b148..f09fff9 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -41,8 +41,8 @@
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = AT91SAM9RL_ID_DMA,
- .end = AT91SAM9RL_ID_DMA,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA,
.flags = IORESOURCE_IRQ,
},
};
@@ -84,8 +84,8 @@
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = AT91SAM9RL_ID_UDPHS,
- .end = AT91SAM9RL_ID_UDPHS,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS,
.flags = IORESOURCE_IRQ,
},
};
@@ -172,8 +172,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9RL_ID_MCI,
- .end = AT91SAM9RL_ID_MCI,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI,
.flags = IORESOURCE_IRQ,
},
};
@@ -339,8 +339,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9RL_ID_TWI0,
- .end = AT91SAM9RL_ID_TWI0,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0,
.flags = IORESOURCE_IRQ,
},
};
@@ -383,8 +383,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9RL_ID_SPI,
- .end = AT91SAM9RL_ID_SPI,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI,
.flags = IORESOURCE_IRQ,
},
};
@@ -452,8 +452,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9RL_ID_AC97C,
- .end = AT91SAM9RL_ID_AC97C,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C,
.flags = IORESOURCE_IRQ,
},
};
@@ -507,8 +507,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9RL_ID_LCDC,
- .end = AT91SAM9RL_ID_LCDC,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_LCDC,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_LCDC,
.flags = IORESOURCE_IRQ,
},
};
@@ -574,18 +574,18 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9RL_ID_TC0,
- .end = AT91SAM9RL_ID_TC0,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC0,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC0,
.flags = IORESOURCE_IRQ,
},
[2] = {
- .start = AT91SAM9RL_ID_TC1,
- .end = AT91SAM9RL_ID_TC1,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC1,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC1,
.flags = IORESOURCE_IRQ,
},
[3] = {
- .start = AT91SAM9RL_ID_TC2,
- .end = AT91SAM9RL_ID_TC2,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC2,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC2,
.flags = IORESOURCE_IRQ,
},
};
@@ -621,8 +621,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9RL_ID_TSC,
- .end = AT91SAM9RL_ID_TSC,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC,
.flags = IORESOURCE_IRQ,
}
};
@@ -768,8 +768,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9RL_ID_PWMC,
- .end = AT91SAM9RL_ID_PWMC,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_PWMC,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_PWMC,
.flags = IORESOURCE_IRQ,
},
};
@@ -821,8 +821,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9RL_ID_SSC0,
- .end = AT91SAM9RL_ID_SSC0,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC0,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC0,
.flags = IORESOURCE_IRQ,
},
};
@@ -863,8 +863,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9RL_ID_SSC1,
- .end = AT91SAM9RL_ID_SSC1,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC1,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC1,
.flags = IORESOURCE_IRQ,
},
};
@@ -943,8 +943,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
+ .start = NR_IRQS_LEGACY + AT91_ID_SYS,
+ .end = NR_IRQS_LEGACY + AT91_ID_SYS,
.flags = IORESOURCE_IRQ,
},
};
@@ -981,8 +981,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9RL_ID_US0,
- .end = AT91SAM9RL_ID_US0,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US0,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US0,
.flags = IORESOURCE_IRQ,
},
};
@@ -1032,8 +1032,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9RL_ID_US1,
- .end = AT91SAM9RL_ID_US1,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US1,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US1,
.flags = IORESOURCE_IRQ,
},
};
@@ -1075,8 +1075,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9RL_ID_US2,
- .end = AT91SAM9RL_ID_US2,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US2,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US2,
.flags = IORESOURCE_IRQ,
},
};
@@ -1118,8 +1118,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9RL_ID_US3,
- .end = AT91SAM9RL_ID_US3,
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US3,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US3,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index 1b144b4..477cf9d 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -312,8 +312,6 @@
void __init at91sam9x5_initialize(void)
{
- at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0);
-
/* Register GPIO subsystem (using DT) */
at91_gpio_init(NULL, 0);
}
@@ -321,47 +319,9 @@
/* --------------------------------------------------------------------
* Interrupt initialization
* -------------------------------------------------------------------- */
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller (FIQ) */
- 7, /* System Peripherals */
- 1, /* Parallel IO Controller A and B */
- 1, /* Parallel IO Controller C and D */
- 4, /* Soft Modem */
- 5, /* USART 0 */
- 5, /* USART 1 */
- 5, /* USART 2 */
- 5, /* USART 3 */
- 6, /* Two-Wire Interface 0 */
- 6, /* Two-Wire Interface 1 */
- 6, /* Two-Wire Interface 2 */
- 0, /* Multimedia Card Interface 0 */
- 5, /* Serial Peripheral Interface 0 */
- 5, /* Serial Peripheral Interface 1 */
- 5, /* UART 0 */
- 5, /* UART 1 */
- 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */
- 0, /* Pulse Width Modulation Controller */
- 0, /* ADC Controller */
- 0, /* DMA Controller 0 */
- 0, /* DMA Controller 1 */
- 2, /* USB Host High Speed port */
- 2, /* USB Device High speed port */
- 3, /* Ethernet MAC 0 */
- 3, /* LDC Controller or Image Sensor Interface */
- 0, /* Multimedia Card Interface 1 */
- 3, /* Ethernet MAC 1 */
- 4, /* Synchronous Serial Interface */
- 4, /* CAN Controller 0 */
- 4, /* CAN Controller 1 */
- 0, /* Advanced Interrupt Controller (IRQ0) */
-};
struct at91_init_soc __initdata at91sam9x5_soc = {
.map_io = at91sam9x5_map_io,
- .default_irq_priority = at91sam9x5_default_irq_priority,
.register_clocks = at91sam9x5_register_clocks,
.init = at91sam9x5_initialize,
};
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index d62fe09..46090e6 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -13,10 +13,12 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <asm/proc-fns.h>
#include <asm/system_misc.h>
#include <asm/mach/arch.h>
#include <mach/at91x40.h>
+#include <mach/at91_aic.h>
#include <mach/at91_st.h>
#include <mach/timex.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 271f994..22d8856 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -36,6 +36,7 @@
#include <mach/board.h>
#include <mach/cpu.h>
+#include <mach/at91_aic.h>
#include "generic.h"
@@ -91,6 +92,7 @@
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = onearm_init_early,
.init_irq = at91_init_irq_default,
.init_machine = onearm_board_init,
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index b7d8aa7..de7be19 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -44,6 +44,7 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include "generic.h"
@@ -212,6 +213,7 @@
/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = afeb9260_init_early,
.init_irq = at91_init_irq_default,
.init_machine = afeb9260_board_init,
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 29d3ef0..477e708 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -39,6 +39,7 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
@@ -188,6 +189,7 @@
/* Maintainer: KwikByte */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = cam60_init_early,
.init_irq = at91_init_irq_default,
.init_machine = cam60_board_init,
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 44328a6..a5b002f 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -36,6 +36,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include "generic.h"
@@ -158,6 +159,7 @@
/* Maintainer: Conitec Datasystems */
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = carmeva_init_early,
.init_irq = at91_init_irq_default,
.init_machine = carmeva_board_init,
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 69951ec..ecbc13b 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -41,6 +41,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91sam9260_matrix.h>
#include <mach/at91_matrix.h>
@@ -376,6 +377,7 @@
/* Maintainer: Eric Benard - EUKREA Electromatique */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = cpu9krea_init_early,
.init_irq = at91_init_irq_default,
.init_machine = cpu9krea_board_init,
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 895cf2d..2e6d043 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -37,6 +37,7 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
#include <mach/cpu.h>
@@ -178,6 +179,7 @@
/* Maintainer: Eric Benard - EUKREA Electromatique */
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = cpuat91_init_early,
.init_irq = at91_init_irq_default,
.init_machine = cpuat91_board_init,
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index cd81336..462bc31 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -39,6 +39,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include "generic.h"
@@ -252,6 +253,7 @@
/* Maintainer: Bill Gatliff */
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = csb337_init_early,
.init_irq = at91_init_irq_default,
.init_machine = csb337_board_init,
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 7c8b05a..872871a 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -36,6 +36,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include "generic.h"
@@ -133,6 +134,7 @@
/* Maintainer: Bill Gatliff */
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = csb637_init_early,
.init_irq = at91_init_irq_default,
.init_machine = csb637_board_init,
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index a1fce05..e8f45c4 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -16,6 +16,7 @@
#include <linux/of_platform.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <asm/setup.h>
#include <asm/irq.h>
@@ -53,6 +54,7 @@
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = at91_dt_initialize,
.init_irq = at91_dt_init_irq,
.init_machine = at91_dt_device_init,
diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c
index d2023f2..01f66e9 100644
--- a/arch/arm/mach-at91/board-eb01.c
+++ b/arch/arm/mach-at91/board-eb01.c
@@ -28,6 +28,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include "generic.h"
static void __init at91eb01_init_irq(void)
@@ -43,6 +44,7 @@
MACHINE_START(AT91EB01, "Atmel AT91 EB01")
/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
.timer = &at91x40_timer,
+ .handle_irq = at91_aic_handle_irq,
.init_early = at91eb01_init_early,
.init_irq = at91eb01_init_irq,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index bd10172..d1e1f3f 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -36,6 +36,7 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include "generic.h"
@@ -118,6 +119,7 @@
MACHINE_START(ATEB9200, "Embest ATEB9200")
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = eb9200_init_early,
.init_irq = at91_init_irq_default,
.init_machine = eb9200_board_init,
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 89cc372..9c24cb2 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -39,6 +39,7 @@
#include <mach/board.h>
#include <mach/cpu.h>
+#include <mach/at91_aic.h>
#include "generic.h"
@@ -170,6 +171,7 @@
/* Maintainer: emQbit.com */
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = ecb_at91init_early,
.init_irq = at91_init_irq_default,
.init_machine = ecb_at91board_init,
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 558546c..82bdfde 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -25,6 +25,7 @@
#include <asm/mach/map.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
#include <mach/cpu.h>
@@ -132,6 +133,7 @@
/* Maintainer: Sascha Hauer */
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = eco920_init_early,
.init_irq = at91_init_irq_default,
.init_machine = eco920_board_init,
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 47658f7..6cc83a8 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -34,6 +34,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include "generic.h"
@@ -160,6 +161,7 @@
/* Maintainer: Maxim Osipov */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = flexibity_init_early,
.init_irq = at91_init_irq_default,
.init_machine = flexibity_board_init,
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 33411e6..69ab124 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -42,6 +42,7 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
@@ -262,6 +263,7 @@
/* Maintainer: Sergio Tanzilli */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = foxg20_init_early,
.init_irq = at91_init_irq_default,
.init_machine = foxg20_board_init,
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 3e0dfa6..a9d5e78 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -31,6 +31,7 @@
#include <asm/mach/arch.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/gsia18s.h>
#include <mach/stamp9g20.h>
@@ -575,6 +576,7 @@
MACHINE_START(GSIA18S, "GS_IA18_S")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = gsia18s_init_early,
.init_irq = at91_init_irq_default,
.init_machine = gsia18s_board_init,
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index f260657..64c1dbf 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -35,6 +35,7 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/cpu.h>
#include "generic.h"
@@ -93,6 +94,7 @@
/* Maintainer: Sergei Sharonov */
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = kafa_init_early,
.init_irq = at91_init_irq_default,
.init_machine = kafa_board_init,
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index ba39db5..5d96cb8 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -37,6 +37,7 @@
#include <mach/board.h>
#include <mach/cpu.h>
+#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
@@ -133,6 +134,7 @@
/* Maintainer: KwikByte, Inc. */
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = kb9202_init_early,
.init_irq = at91_init_irq_default,
.init_machine = kb9202_board_init,
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index d2f4cc1..18103c5d 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -45,6 +45,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
@@ -378,6 +379,7 @@
/* Maintainer: ADENEO */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = neocore926_init_early,
.init_irq = at91_init_irq_default,
.init_machine = neocore926_board_init,
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 7fe6383..9ca3e32 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -30,6 +30,7 @@
#include <asm/mach/arch.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/stamp9g20.h>
@@ -218,6 +219,7 @@
/* Maintainer: pgsellmann@portner-elektronik.at */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = pcontrol_g20_init_early,
.init_irq = at91_init_irq_default,
.init_machine = pcontrol_g20_board_init,
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index b45c0a5..1270655 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -38,6 +38,7 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
@@ -120,6 +121,7 @@
/* Maintainer: Kleinhenz Elektronik GmbH */
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = picotux200_init_early,
.init_irq = at91_init_irq_default,
.init_machine = picotux200_board_init,
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 0c61bf0..bf351e2 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -41,6 +41,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
@@ -258,6 +259,7 @@
/* Maintainer: calao-systems */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index afd7a47..cc2bf97 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -40,6 +40,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
@@ -223,6 +224,7 @@
/* Maintainer: SAN People/Atmel */
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = dk_init_early,
.init_irq = at91_init_irq_default,
.init_machine = dk_board_init,
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 2b15b8a..62e19e6 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -40,6 +40,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
@@ -190,6 +191,7 @@
/* Maintainer: SAN People/Atmel */
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index 24ab9be..c3b43ae 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -26,6 +26,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <linux/gpio.h>
@@ -225,6 +226,7 @@
/* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = rsi_ews_init_early,
.init_irq = at91_init_irq_default,
.init_machine = rsi_ews_board_init,
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index cdd21f2..7bf6da7 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -38,6 +38,7 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
@@ -202,6 +203,7 @@
/* Maintainer: Olimex */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 7b3c391..889c1bf 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -42,6 +42,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
@@ -344,6 +345,7 @@
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 2736453..2269be5 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -46,6 +46,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
@@ -615,6 +616,7 @@
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 983cb98..82adf58 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -45,6 +45,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
@@ -443,6 +444,7 @@
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 6860d34..4ea4ee0 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -44,6 +44,7 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/system_rev.h>
@@ -413,6 +414,7 @@
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
@@ -422,6 +424,7 @@
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 63163dc..3d48ec1 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -43,6 +43,7 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
@@ -503,6 +504,7 @@
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index be3239f..e7dc3ea 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -31,6 +31,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
@@ -319,6 +320,7 @@
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 9d446f1b..a4e031a 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -33,6 +33,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
@@ -178,6 +179,7 @@
MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = snapper9260_init_early,
.init_irq = at91_init_irq_default,
.init_machine = snapper9260_board_init,
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index ee86f9d..29eae16 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -26,6 +26,7 @@
#include <asm/mach/arch.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
@@ -287,6 +288,7 @@
/* Maintainer: taskit GmbH */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = stamp9g20_init_early,
.init_irq = at91_init_irq_default,
.init_machine = portuxg20_board_init,
@@ -296,6 +298,7 @@
/* Maintainer: taskit GmbH */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = stamp9g20_init_early,
.init_irq = at91_init_irq_default,
.init_machine = stamp9g20evb_board_init,
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index 95393fc..c1476b9 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -42,6 +42,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
@@ -358,6 +359,7 @@
/* Maintainer: calao-systems */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
@@ -367,6 +369,7 @@
/* Maintainer: calao-systems */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
@@ -376,6 +379,7 @@
/* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index d56665e..516d340 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -44,6 +44,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
+#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
#include <mach/cpu.h>
@@ -590,6 +591,7 @@
/* Maintainer: S.Birtles */
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = yl9200_init_early,
.init_irq = at91_init_irq_default,
.init_machine = yl9200_board_init,
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 0a60bf8..f496506 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -29,6 +29,8 @@
extern void __init at91_aic_init(unsigned int priority[]);
extern int __init at91_aic_of_init(struct device_node *node,
struct device_node *parent);
+extern int __init at91_aic5_of_init(struct device_node *node,
+ struct device_node *parent);
/* Timer */
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 325837a..be42cf0 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -26,6 +26,8 @@
#include <linux/of_irq.h>
#include <linux/of_gpio.h>
+#include <asm/mach/irq.h>
+
#include <mach/hardware.h>
#include <mach/at91_pio.h>
@@ -585,15 +587,14 @@
static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
struct irq_data *idata = irq_desc_get_irq_data(desc);
- struct irq_chip *chip = irq_data_get_irq_chip(idata);
struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata);
void __iomem *pio = at91_gpio->regbase;
unsigned long isr;
int n;
- /* temporarily mask (level sensitive) parent IRQ */
- chip->irq_ack(idata);
+ chained_irq_enter(chip, desc);
for (;;) {
/* Reading ISR acks pending (edge triggered) GPIO interrupts.
* When there none are pending, we're finished unless we need
@@ -614,7 +615,7 @@
n = find_next_bit(&isr, BITS_PER_LONG, n + 1);
}
}
- chip->irq_unmask(idata);
+ chained_irq_exit(chip, desc);
/* now it may re-trigger */
}
diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/include/mach/at91_aic.h
index 3045781..eaea661 100644
--- a/arch/arm/mach-at91/include/mach/at91_aic.h
+++ b/arch/arm/mach-at91/include/mach/at91_aic.h
@@ -23,12 +23,23 @@
__raw_readl(at91_aic_base + field)
#define at91_aic_write(field, value) \
- __raw_writel(value, at91_aic_base + field);
+ __raw_writel(value, at91_aic_base + field)
#else
.extern at91_aic_base
#endif
+/* Number of irq lines managed by AIC */
+#define NR_AIC_IRQS 32
+#define NR_AIC5_IRQS 128
+
+#define AT91_AIC5_SSR 0x0 /* Source Select Register [AIC5] */
+#define AT91_AIC5_INTSEL_MSK (0x7f << 0) /* Interrupt Line Selection Mask */
+
+#define AT91_AIC_IRQ_MIN_PRIORITY 0
+#define AT91_AIC_IRQ_MAX_PRIORITY 7
+
#define AT91_AIC_SMR(n) ((n) * 4) /* Source Mode Registers 0-31 */
+#define AT91_AIC5_SMR 0x4 /* Source Mode Register [AIC5] */
#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */
#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */
#define AT91_AIC_SRCTYPE_LOW (0 << 5)
@@ -37,29 +48,52 @@
#define AT91_AIC_SRCTYPE_RISING (3 << 5)
#define AT91_AIC_SVR(n) (0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */
+#define AT91_AIC5_SVR 0x8 /* Source Vector Register [AIC5] */
#define AT91_AIC_IVR 0x100 /* Interrupt Vector Register */
+#define AT91_AIC5_IVR 0x10 /* Interrupt Vector Register [AIC5] */
#define AT91_AIC_FVR 0x104 /* Fast Interrupt Vector Register */
+#define AT91_AIC5_FVR 0x14 /* Fast Interrupt Vector Register [AIC5] */
#define AT91_AIC_ISR 0x108 /* Interrupt Status Register */
+#define AT91_AIC5_ISR 0x18 /* Interrupt Status Register [AIC5] */
#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */
#define AT91_AIC_IPR 0x10c /* Interrupt Pending Register */
+#define AT91_AIC5_IPR0 0x20 /* Interrupt Pending Register 0 [AIC5] */
+#define AT91_AIC5_IPR1 0x24 /* Interrupt Pending Register 1 [AIC5] */
+#define AT91_AIC5_IPR2 0x28 /* Interrupt Pending Register 2 [AIC5] */
+#define AT91_AIC5_IPR3 0x2c /* Interrupt Pending Register 3 [AIC5] */
#define AT91_AIC_IMR 0x110 /* Interrupt Mask Register */
+#define AT91_AIC5_IMR 0x30 /* Interrupt Mask Register [AIC5] */
#define AT91_AIC_CISR 0x114 /* Core Interrupt Status Register */
+#define AT91_AIC5_CISR 0x34 /* Core Interrupt Status Register [AIC5] */
#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */
#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */
#define AT91_AIC_IECR 0x120 /* Interrupt Enable Command Register */
+#define AT91_AIC5_IECR 0x40 /* Interrupt Enable Command Register [AIC5] */
#define AT91_AIC_IDCR 0x124 /* Interrupt Disable Command Register */
+#define AT91_AIC5_IDCR 0x44 /* Interrupt Disable Command Register [AIC5] */
#define AT91_AIC_ICCR 0x128 /* Interrupt Clear Command Register */
+#define AT91_AIC5_ICCR 0x48 /* Interrupt Clear Command Register [AIC5] */
#define AT91_AIC_ISCR 0x12c /* Interrupt Set Command Register */
+#define AT91_AIC5_ISCR 0x4c /* Interrupt Set Command Register [AIC5] */
#define AT91_AIC_EOICR 0x130 /* End of Interrupt Command Register */
+#define AT91_AIC5_EOICR 0x38 /* End of Interrupt Command Register [AIC5] */
#define AT91_AIC_SPU 0x134 /* Spurious Interrupt Vector Register */
+#define AT91_AIC5_SPU 0x3c /* Spurious Interrupt Vector Register [AIC5] */
#define AT91_AIC_DCR 0x138 /* Debug Control Register */
+#define AT91_AIC5_DCR 0x6c /* Debug Control Register [AIC5] */
#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */
#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */
#define AT91_AIC_FFER 0x140 /* Fast Forcing Enable Register [SAM9 only] */
+#define AT91_AIC5_FFER 0x50 /* Fast Forcing Enable Register [AIC5] */
#define AT91_AIC_FFDR 0x144 /* Fast Forcing Disable Register [SAM9 only] */
+#define AT91_AIC5_FFDR 0x54 /* Fast Forcing Disable Register [AIC5] */
#define AT91_AIC_FFSR 0x148 /* Fast Forcing Status Register [SAM9 only] */
+#define AT91_AIC5_FFSR 0x58 /* Fast Forcing Status Register [AIC5] */
+
+void at91_aic_handle_irq(struct pt_regs *regs);
+void at91_aic5_handle_irq(struct pt_regs *regs);
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_spi.h b/arch/arm/mach-at91/include/mach/at91_spi.h
deleted file mode 100644
index 2f6ba0c..0000000
--- a/arch/arm/mach-at91/include/mach/at91_spi.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_spi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Serial Peripheral Interface (SPI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SPI_H
-#define AT91_SPI_H
-
-#define AT91_SPI_CR 0x00 /* Control Register */
-#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */
-#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */
-#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */
-#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_MR 0x04 /* Mode Register */
-#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */
-#define AT91_SPI_PS (1 << 1) /* Peripheral Select */
-#define AT91_SPI_PS_FIXED (0 << 1)
-#define AT91_SPI_PS_VARIABLE (1 << 1)
-#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */
-#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */
-#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */
-#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */
-#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
-#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */
-
-#define AT91_SPI_RDR 0x08 /* Receive Data Register */
-#define AT91_SPI_RD (0xffff << 0) /* Receive Data */
-#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
-
-#define AT91_SPI_TDR 0x0c /* Transmit Data Register */
-#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */
-#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
-#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_SR 0x10 /* Status Register */
-#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */
-#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */
-#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */
-#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */
-#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */
-#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */
-#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */
-#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */
-#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */
-#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */
-#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */
-
-#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */
-#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */
-#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */
-
-#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */
-#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */
-#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */
-#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */
-#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */
-#define AT91_SPI_BITS_8 (0 << 4)
-#define AT91_SPI_BITS_9 (1 << 4)
-#define AT91_SPI_BITS_10 (2 << 4)
-#define AT91_SPI_BITS_11 (3 << 4)
-#define AT91_SPI_BITS_12 (4 << 4)
-#define AT91_SPI_BITS_13 (5 << 4)
-#define AT91_SPI_BITS_14 (6 << 4)
-#define AT91_SPI_BITS_15 (7 << 4)
-#define AT91_SPI_BITS_16 (8 << 4)
-#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */
-#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */
-#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_ssc.h b/arch/arm/mach-at91/include/mach/at91_ssc.h
deleted file mode 100644
index a81114c..0000000
--- a/arch/arm/mach-at91/include/mach/at91_ssc.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_ssc.h
- *
- * Copyright (C) SAN People
- *
- * Serial Synchronous Controller (SSC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SSC_H
-#define AT91_SSC_H
-
-#define AT91_SSC_CR 0x00 /* Control Register */
-#define AT91_SSC_RXEN (1 << 0) /* Receive Enable */
-#define AT91_SSC_RXDIS (1 << 1) /* Receive Disable */
-#define AT91_SSC_TXEN (1 << 8) /* Transmit Enable */
-#define AT91_SSC_TXDIS (1 << 9) /* Transmit Disable */
-#define AT91_SSC_SWRST (1 << 15) /* Software Reset */
-
-#define AT91_SSC_CMR 0x04 /* Clock Mode Register */
-#define AT91_SSC_CMR_DIV (0xfff << 0) /* Clock Divider */
-
-#define AT91_SSC_RCMR 0x10 /* Receive Clock Mode Register */
-#define AT91_SSC_CKS (3 << 0) /* Clock Selection */
-#define AT91_SSC_CKS_DIV (0 << 0)
-#define AT91_SSC_CKS_CLOCK (1 << 0)
-#define AT91_SSC_CKS_PIN (2 << 0)
-#define AT91_SSC_CKO (7 << 2) /* Clock Output Mode Selection */
-#define AT91_SSC_CKO_NONE (0 << 2)
-#define AT91_SSC_CKO_CONTINUOUS (1 << 2)
-#define AT91_SSC_CKI (1 << 5) /* Clock Inversion */
-#define AT91_SSC_CKI_FALLING (0 << 5)
-#define AT91_SSC_CK_RISING (1 << 5)
-#define AT91_SSC_CKG (1 << 6) /* Receive Clock Gating Selection [AT91SAM9261 only] */
-#define AT91_SSC_CKG_NONE (0 << 6)
-#define AT91_SSC_CKG_RFLOW (1 << 6)
-#define AT91_SSC_CKG_RFHIGH (2 << 6)
-#define AT91_SSC_START (0xf << 8) /* Start Selection */
-#define AT91_SSC_START_CONTINUOUS (0 << 8)
-#define AT91_SSC_START_TX_RX (1 << 8)
-#define AT91_SSC_START_LOW_RF (2 << 8)
-#define AT91_SSC_START_HIGH_RF (3 << 8)
-#define AT91_SSC_START_FALLING_RF (4 << 8)
-#define AT91_SSC_START_RISING_RF (5 << 8)
-#define AT91_SSC_START_LEVEL_RF (6 << 8)
-#define AT91_SSC_START_EDGE_RF (7 << 8)
-#define AT91_SSC_STOP (1 << 12) /* Receive Stop Selection [AT91SAM9261 only] */
-#define AT91_SSC_STTDLY (0xff << 16) /* Start Delay */
-#define AT91_SSC_PERIOD (0xff << 24) /* Period Divider Selection */
-
-#define AT91_SSC_RFMR 0x14 /* Receive Frame Mode Register */
-#define AT91_SSC_DATALEN (0x1f << 0) /* Data Length */
-#define AT91_SSC_LOOP (1 << 5) /* Loop Mode */
-#define AT91_SSC_MSBF (1 << 7) /* Most Significant Bit First */
-#define AT91_SSC_DATNB (0xf << 8) /* Data Number per Frame */
-#define AT91_SSC_FSLEN (0xf << 16) /* Frame Sync Length */
-#define AT91_SSC_FSOS (7 << 20) /* Frame Sync Output Selection */
-#define AT91_SSC_FSOS_NONE (0 << 20)
-#define AT91_SSC_FSOS_NEGATIVE (1 << 20)
-#define AT91_SSC_FSOS_POSITIVE (2 << 20)
-#define AT91_SSC_FSOS_LOW (3 << 20)
-#define AT91_SSC_FSOS_HIGH (4 << 20)
-#define AT91_SSC_FSOS_TOGGLE (5 << 20)
-#define AT91_SSC_FSEDGE (1 << 24) /* Frame Sync Edge Detection */
-#define AT91_SSC_FSEDGE_POSITIVE (0 << 24)
-#define AT91_SSC_FSEDGE_NEGATIVE (1 << 24)
-
-#define AT91_SSC_TCMR 0x18 /* Transmit Clock Mode Register */
-#define AT91_SSC_TFMR 0x1c /* Transmit Fram Mode Register */
-#define AT91_SSC_DATDEF (1 << 5) /* Data Default Value */
-#define AT91_SSC_FSDEN (1 << 23) /* Frame Sync Data Enable */
-
-#define AT91_SSC_RHR 0x20 /* Receive Holding Register */
-#define AT91_SSC_THR 0x24 /* Transmit Holding Register */
-#define AT91_SSC_RSHR 0x30 /* Receive Sync Holding Register */
-#define AT91_SSC_TSHR 0x34 /* Transmit Sync Holding Register */
-
-#define AT91_SSC_RC0R 0x38 /* Receive Compare 0 Register [AT91SAM9261 only] */
-#define AT91_SSC_RC1R 0x3c /* Receive Compare 1 Register [AT91SAM9261 only] */
-
-#define AT91_SSC_SR 0x40 /* Status Register */
-#define AT91_SSC_TXRDY (1 << 0) /* Transmit Ready */
-#define AT91_SSC_TXEMPTY (1 << 1) /* Transmit Empty */
-#define AT91_SSC_ENDTX (1 << 2) /* End of Transmission */
-#define AT91_SSC_TXBUFE (1 << 3) /* Transmit Buffer Empty */
-#define AT91_SSC_RXRDY (1 << 4) /* Receive Ready */
-#define AT91_SSC_OVRUN (1 << 5) /* Receive Overrun */
-#define AT91_SSC_ENDRX (1 << 6) /* End of Reception */
-#define AT91_SSC_RXBUFF (1 << 7) /* Receive Buffer Full */
-#define AT91_SSC_CP0 (1 << 8) /* Compare 0 [AT91SAM9261 only] */
-#define AT91_SSC_CP1 (1 << 9) /* Compare 1 [AT91SAM9261 only] */
-#define AT91_SSC_TXSYN (1 << 10) /* Transmit Sync */
-#define AT91_SSC_RXSYN (1 << 11) /* Receive Sync */
-#define AT91_SSC_TXENA (1 << 16) /* Transmit Enable */
-#define AT91_SSC_RXENA (1 << 17) /* Receive Enable */
-
-#define AT91_SSC_IER 0x44 /* Interrupt Enable Register */
-#define AT91_SSC_IDR 0x48 /* Interrupt Disable Register */
-#define AT91_SSC_IMR 0x4c /* Interrupt Mask Register */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S
deleted file mode 100644
index 903bf20..0000000
--- a/arch/arm/mach-at91/include/mach/entry-macro.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/entry-macro.S
- *
- * Copyright (C) 2003-2005 SAN People
- *
- * Low-level IRQ helper macros for AT91RM9200 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/hardware.h>
-#include <mach/at91_aic.h>
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =at91_aic_base @ base virtual address of AIC peripheral
- ldr \base, [\base]
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
- ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number
- teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
- streq \tmp, [\base, #AT91_AIC_EOICR] @ not going to be handled further, then ACK it now.
- .endm
-
diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h
deleted file mode 100644
index ac8b7df..0000000
--- a/arch/arm/mach-at91/include/mach/irqs.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/irqs.h
- *
- * Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <linux/io.h>
-#include <mach/at91_aic.h>
-
-#define NR_AIC_IRQS 32
-
-
-/*
- * Acknowledge interrupt with AIC after interrupt has been handled.
- * (by kernel/irq.c)
- */
-#define irq_finish(irq) do { at91_aic_write(AT91_AIC_EOICR, 0); } while (0)
-
-
-/*
- * IRQ interrupt symbols are the AT91xxx_ID_* symbols
- * for IRQs handled directly through the AIC, or else the AT91_PIN_*
- * symbols in gpio.h for ones handled indirectly as GPIOs.
- * We make provision for 5 banks of GPIO.
- */
-#define NR_IRQS (NR_AIC_IRQS + (5 * 32))
-
-/* FIQ is AIC source 0. */
-#define FIQ_START AT91_ID_FIQ
-
-#endif
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index cfcfcbe..1e02c0e 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -23,6 +23,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mm.h>
+#include <linux/bitmap.h>
#include <linux/types.h>
#include <linux/irq.h>
#include <linux/of.h>
@@ -30,38 +31,218 @@
#include <linux/of_irq.h>
#include <linux/irqdomain.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/setup.h>
+#include <asm/exception.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
+#include <mach/at91_aic.h>
+
void __iomem *at91_aic_base;
static struct irq_domain *at91_aic_domain;
static struct device_node *at91_aic_np;
+static unsigned int n_irqs = NR_AIC_IRQS;
+static unsigned long at91_aic_caps = 0;
+
+/* AIC5 introduces a Source Select Register */
+#define AT91_AIC_CAP_AIC5 (1 << 0)
+#define has_aic5() (at91_aic_caps & AT91_AIC_CAP_AIC5)
+
+#ifdef CONFIG_PM
+
+static unsigned long *wakeups;
+static unsigned long *backups;
+
+#define set_backup(bit) set_bit(bit, backups)
+#define clear_backup(bit) clear_bit(bit, backups)
+
+static int at91_aic_pm_init(void)
+{
+ backups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL);
+ if (!backups)
+ return -ENOMEM;
+
+ wakeups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL);
+ if (!wakeups) {
+ kfree(backups);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int at91_aic_set_wake(struct irq_data *d, unsigned value)
+{
+ if (unlikely(d->hwirq >= n_irqs))
+ return -EINVAL;
+
+ if (value)
+ set_bit(d->hwirq, wakeups);
+ else
+ clear_bit(d->hwirq, wakeups);
+
+ return 0;
+}
+
+void at91_irq_suspend(void)
+{
+ int i = 0, bit;
+
+ if (has_aic5()) {
+ /* disable enabled irqs */
+ while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+ at91_aic_write(AT91_AIC5_SSR,
+ bit & AT91_AIC5_INTSEL_MSK);
+ at91_aic_write(AT91_AIC5_IDCR, 1);
+ i = bit;
+ }
+ /* enable wakeup irqs */
+ i = 0;
+ while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+ at91_aic_write(AT91_AIC5_SSR,
+ bit & AT91_AIC5_INTSEL_MSK);
+ at91_aic_write(AT91_AIC5_IECR, 1);
+ i = bit;
+ }
+ } else {
+ at91_aic_write(AT91_AIC_IDCR, *backups);
+ at91_aic_write(AT91_AIC_IECR, *wakeups);
+ }
+}
+
+void at91_irq_resume(void)
+{
+ int i = 0, bit;
+
+ if (has_aic5()) {
+ /* disable wakeup irqs */
+ while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+ at91_aic_write(AT91_AIC5_SSR,
+ bit & AT91_AIC5_INTSEL_MSK);
+ at91_aic_write(AT91_AIC5_IDCR, 1);
+ i = bit;
+ }
+ /* enable irqs disabled for suspend */
+ i = 0;
+ while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+ at91_aic_write(AT91_AIC5_SSR,
+ bit & AT91_AIC5_INTSEL_MSK);
+ at91_aic_write(AT91_AIC5_IECR, 1);
+ i = bit;
+ }
+ } else {
+ at91_aic_write(AT91_AIC_IDCR, *wakeups);
+ at91_aic_write(AT91_AIC_IECR, *backups);
+ }
+}
+
+#else
+static inline int at91_aic_pm_init(void)
+{
+ return 0;
+}
+
+#define set_backup(bit)
+#define clear_backup(bit)
+#define at91_aic_set_wake NULL
+
+#endif /* CONFIG_PM */
+
+asmlinkage void __exception_irq_entry
+at91_aic_handle_irq(struct pt_regs *regs)
+{
+ u32 irqnr;
+ u32 irqstat;
+
+ irqnr = at91_aic_read(AT91_AIC_IVR);
+ irqstat = at91_aic_read(AT91_AIC_ISR);
+
+ /*
+ * ISR value is 0 when there is no current interrupt or when there is
+ * a spurious interrupt
+ */
+ if (!irqstat)
+ at91_aic_write(AT91_AIC_EOICR, 0);
+ else
+ handle_IRQ(irqnr, regs);
+}
+
+asmlinkage void __exception_irq_entry
+at91_aic5_handle_irq(struct pt_regs *regs)
+{
+ u32 irqnr;
+ u32 irqstat;
+
+ irqnr = at91_aic_read(AT91_AIC5_IVR);
+ irqstat = at91_aic_read(AT91_AIC5_ISR);
+
+ if (!irqstat)
+ at91_aic_write(AT91_AIC5_EOICR, 0);
+ else
+ handle_IRQ(irqnr, regs);
+}
static void at91_aic_mask_irq(struct irq_data *d)
{
/* Disable interrupt on AIC */
at91_aic_write(AT91_AIC_IDCR, 1 << d->hwirq);
+ /* Update ISR cache */
+ clear_backup(d->hwirq);
+}
+
+static void __maybe_unused at91_aic5_mask_irq(struct irq_data *d)
+{
+ /* Disable interrupt on AIC5 */
+ at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK);
+ at91_aic_write(AT91_AIC5_IDCR, 1);
+ /* Update ISR cache */
+ clear_backup(d->hwirq);
}
static void at91_aic_unmask_irq(struct irq_data *d)
{
/* Enable interrupt on AIC */
at91_aic_write(AT91_AIC_IECR, 1 << d->hwirq);
+ /* Update ISR cache */
+ set_backup(d->hwirq);
}
-unsigned int at91_extern_irq;
-
-#define is_extern_irq(hwirq) ((1 << (hwirq)) & at91_extern_irq)
-
-static int at91_aic_set_type(struct irq_data *d, unsigned type)
+static void __maybe_unused at91_aic5_unmask_irq(struct irq_data *d)
{
- unsigned int smr, srctype;
+ /* Enable interrupt on AIC5 */
+ at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK);
+ at91_aic_write(AT91_AIC5_IECR, 1);
+ /* Update ISR cache */
+ set_backup(d->hwirq);
+}
+
+static void at91_aic_eoi(struct irq_data *d)
+{
+ /*
+ * Mark end-of-interrupt on AIC, the controller doesn't care about
+ * the value written. Moreover it's a write-only register.
+ */
+ at91_aic_write(AT91_AIC_EOICR, 0);
+}
+
+static void __maybe_unused at91_aic5_eoi(struct irq_data *d)
+{
+ at91_aic_write(AT91_AIC5_EOICR, 0);
+}
+
+unsigned long *at91_extern_irq;
+
+#define is_extern_irq(hwirq) test_bit(hwirq, at91_extern_irq)
+
+static int at91_aic_compute_srctype(struct irq_data *d, unsigned type)
+{
+ int srctype;
switch (type) {
case IRQ_TYPE_LEVEL_HIGH:
@@ -74,65 +255,51 @@
if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */
srctype = AT91_AIC_SRCTYPE_LOW;
else
- return -EINVAL;
+ srctype = -EINVAL;
break;
case IRQ_TYPE_EDGE_FALLING:
if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */
srctype = AT91_AIC_SRCTYPE_FALLING;
else
- return -EINVAL;
+ srctype = -EINVAL;
break;
default:
- return -EINVAL;
+ srctype = -EINVAL;
}
- smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE;
- at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype);
- return 0;
+ return srctype;
}
-#ifdef CONFIG_PM
-
-static u32 wakeups;
-static u32 backups;
-
-static int at91_aic_set_wake(struct irq_data *d, unsigned value)
+static int at91_aic_set_type(struct irq_data *d, unsigned type)
{
- if (unlikely(d->hwirq >= NR_AIC_IRQS))
- return -EINVAL;
+ unsigned int smr;
+ int srctype;
- if (value)
- wakeups |= (1 << d->hwirq);
- else
- wakeups &= ~(1 << d->hwirq);
+ srctype = at91_aic_compute_srctype(d, type);
+ if (srctype < 0)
+ return srctype;
+
+ if (has_aic5()) {
+ at91_aic_write(AT91_AIC5_SSR,
+ d->hwirq & AT91_AIC5_INTSEL_MSK);
+ smr = at91_aic_read(AT91_AIC5_SMR) & ~AT91_AIC_SRCTYPE;
+ at91_aic_write(AT91_AIC5_SMR, smr | srctype);
+ } else {
+ smr = at91_aic_read(AT91_AIC_SMR(d->hwirq))
+ & ~AT91_AIC_SRCTYPE;
+ at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype);
+ }
return 0;
}
-void at91_irq_suspend(void)
-{
- backups = at91_aic_read(AT91_AIC_IMR);
- at91_aic_write(AT91_AIC_IDCR, backups);
- at91_aic_write(AT91_AIC_IECR, wakeups);
-}
-
-void at91_irq_resume(void)
-{
- at91_aic_write(AT91_AIC_IDCR, wakeups);
- at91_aic_write(AT91_AIC_IECR, backups);
-}
-
-#else
-#define at91_aic_set_wake NULL
-#endif
-
static struct irq_chip at91_aic_chip = {
.name = "AIC",
- .irq_ack = at91_aic_mask_irq,
.irq_mask = at91_aic_mask_irq,
.irq_unmask = at91_aic_unmask_irq,
.irq_set_type = at91_aic_set_type,
.irq_set_wake = at91_aic_set_wake,
+ .irq_eoi = at91_aic_eoi,
};
static void __init at91_aic_hw_init(unsigned int spu_vector)
@@ -161,41 +328,172 @@
at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF);
}
+static void __init __maybe_unused at91_aic5_hw_init(unsigned int spu_vector)
+{
+ int i;
+
+ /*
+ * Perform 8 End Of Interrupt Command to make sure AIC
+ * will not Lock out nIRQ
+ */
+ for (i = 0; i < 8; i++)
+ at91_aic_write(AT91_AIC5_EOICR, 0);
+
+ /*
+ * Spurious Interrupt ID in Spurious Vector Register.
+ * When there is no current interrupt, the IRQ Vector Register
+ * reads the value stored in AIC_SPU
+ */
+ at91_aic_write(AT91_AIC5_SPU, spu_vector);
+
+ /* No debugging in AIC: Debug (Protect) Control Register */
+ at91_aic_write(AT91_AIC5_DCR, 0);
+
+ /* Disable and clear all interrupts initially */
+ for (i = 0; i < n_irqs; i++) {
+ at91_aic_write(AT91_AIC5_SSR, i & AT91_AIC5_INTSEL_MSK);
+ at91_aic_write(AT91_AIC5_IDCR, 1);
+ at91_aic_write(AT91_AIC5_ICCR, 1);
+ }
+}
+
#if defined(CONFIG_OF)
+static unsigned int *at91_aic_irq_priorities;
+
static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
/* Put virq number in Source Vector Register */
at91_aic_write(AT91_AIC_SVR(hw), virq);
- /* Active Low interrupt, without priority */
- at91_aic_write(AT91_AIC_SMR(hw), AT91_AIC_SRCTYPE_LOW);
+ /* Active Low interrupt, with priority */
+ at91_aic_write(AT91_AIC_SMR(hw),
+ AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]);
- irq_set_chip_and_handler(virq, &at91_aic_chip, handle_level_irq);
+ irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq);
set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
return 0;
}
+static int at91_aic5_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ at91_aic_write(AT91_AIC5_SSR, hw & AT91_AIC5_INTSEL_MSK);
+
+ /* Put virq number in Source Vector Register */
+ at91_aic_write(AT91_AIC5_SVR, virq);
+
+ /* Active Low interrupt, with priority */
+ at91_aic_write(AT91_AIC5_SMR,
+ AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]);
+
+ irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq);
+ set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
+
+ return 0;
+}
+
+static int at91_aic_irq_domain_xlate(struct irq_domain *d, struct device_node *ctrlr,
+ const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_type)
+{
+ if (WARN_ON(intsize < 3))
+ return -EINVAL;
+ if (WARN_ON(intspec[0] >= n_irqs))
+ return -EINVAL;
+ if (WARN_ON((intspec[2] < AT91_AIC_IRQ_MIN_PRIORITY)
+ || (intspec[2] > AT91_AIC_IRQ_MAX_PRIORITY)))
+ return -EINVAL;
+
+ *out_hwirq = intspec[0];
+ *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
+ at91_aic_irq_priorities[*out_hwirq] = intspec[2];
+
+ return 0;
+}
+
static struct irq_domain_ops at91_aic_irq_ops = {
.map = at91_aic_irq_map,
- .xlate = irq_domain_xlate_twocell,
+ .xlate = at91_aic_irq_domain_xlate,
};
-int __init at91_aic_of_init(struct device_node *node,
- struct device_node *parent)
+int __init at91_aic_of_common_init(struct device_node *node,
+ struct device_node *parent)
{
+ struct property *prop;
+ const __be32 *p;
+ u32 val;
+
+ at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs)
+ * sizeof(*at91_extern_irq), GFP_KERNEL);
+ if (!at91_extern_irq)
+ return -ENOMEM;
+
+ if (at91_aic_pm_init()) {
+ kfree(at91_extern_irq);
+ return -ENOMEM;
+ }
+
+ at91_aic_irq_priorities = kzalloc(n_irqs
+ * sizeof(*at91_aic_irq_priorities),
+ GFP_KERNEL);
+ if (!at91_aic_irq_priorities)
+ return -ENOMEM;
+
at91_aic_base = of_iomap(node, 0);
at91_aic_np = node;
- at91_aic_domain = irq_domain_add_linear(at91_aic_np, NR_AIC_IRQS,
+ at91_aic_domain = irq_domain_add_linear(at91_aic_np, n_irqs,
&at91_aic_irq_ops, NULL);
if (!at91_aic_domain)
panic("Unable to add AIC irq domain (DT)\n");
+ of_property_for_each_u32(node, "atmel,external-irqs", prop, p, val) {
+ if (val >= n_irqs)
+ pr_warn("AIC: external irq %d >= %d skip it\n",
+ val, n_irqs);
+ else
+ set_bit(val, at91_extern_irq);
+ }
+
irq_set_default_host(at91_aic_domain);
- at91_aic_hw_init(NR_AIC_IRQS);
+ return 0;
+}
+
+int __init at91_aic_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ int err;
+
+ err = at91_aic_of_common_init(node, parent);
+ if (err)
+ return err;
+
+ at91_aic_hw_init(n_irqs);
+
+ return 0;
+}
+
+int __init at91_aic5_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ int err;
+
+ at91_aic_caps |= AT91_AIC_CAP_AIC5;
+ n_irqs = NR_AIC5_IRQS;
+ at91_aic_chip.irq_ack = at91_aic5_mask_irq;
+ at91_aic_chip.irq_mask = at91_aic5_mask_irq;
+ at91_aic_chip.irq_unmask = at91_aic5_unmask_irq;
+ at91_aic_chip.irq_eoi = at91_aic5_eoi;
+ at91_aic_irq_ops.map = at91_aic5_irq_map;
+
+ err = at91_aic_of_common_init(node, parent);
+ if (err)
+ return err;
+
+ at91_aic5_hw_init(n_irqs);
return 0;
}
@@ -204,22 +502,25 @@
/*
* Initialize the AIC interrupt controller.
*/
-void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
+void __init at91_aic_init(unsigned int *priority)
{
unsigned int i;
int irq_base;
+ if (at91_aic_pm_init())
+ panic("Unable to allocate bit maps\n");
+
at91_aic_base = ioremap(AT91_AIC, 512);
if (!at91_aic_base)
panic("Unable to ioremap AIC registers\n");
/* Add irq domain for AIC */
- irq_base = irq_alloc_descs(-1, 0, NR_AIC_IRQS, 0);
+ irq_base = irq_alloc_descs(-1, 0, n_irqs, 0);
if (irq_base < 0) {
WARN(1, "Cannot allocate irq_descs, assuming pre-allocated\n");
irq_base = 0;
}
- at91_aic_domain = irq_domain_add_legacy(at91_aic_np, NR_AIC_IRQS,
+ at91_aic_domain = irq_domain_add_legacy(at91_aic_np, n_irqs,
irq_base, 0,
&irq_domain_simple_ops, NULL);
@@ -232,15 +533,14 @@
* The IVR is used by macro get_irqnr_and_base to read and verify.
* The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
*/
- for (i = 0; i < NR_AIC_IRQS; i++) {
+ for (i = 0; i < n_irqs; i++) {
/* Put hardware irq number in Source Vector Register: */
- at91_aic_write(AT91_AIC_SVR(i), i);
+ at91_aic_write(AT91_AIC_SVR(i), NR_IRQS_LEGACY + i);
/* Active Low interrupt, with the specified priority */
at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
-
- irq_set_chip_and_handler(i, &at91_aic_chip, handle_level_irq);
+ irq_set_chip_and_handler(NR_IRQS_LEGACY + i, &at91_aic_chip, handle_fasteoi_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
- at91_aic_hw_init(NR_AIC_IRQS);
+ at91_aic_hw_init(n_irqs);
}
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 1bfaad6..2c2d865 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -25,6 +25,7 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
+#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index c965fd8..f15293b 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -26,7 +26,6 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/sched.h>
-#include <linux/timex.h>
#include <asm/sizes.h>
#include <mach/hardware.h>
@@ -188,7 +187,6 @@
static void __init clps711x_timer_init(void)
{
- struct timespec tv;
unsigned int syscon;
syscon = clps_readl(SYSCON1);
@@ -198,10 +196,6 @@
clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
-
- tv.tv_nsec = 0;
- tv.tv_sec = clps_readl(RTCDR);
- do_settimeofday(&tv);
}
struct sys_timer clps711x_timer = {
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
index 3a032a6..fc0e028 100644
--- a/arch/arm/mach-clps711x/include/mach/memory.h
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -25,26 +25,6 @@
*/
#define PLAT_PHYS_OFFSET UL(0xc0000000)
-#if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12)
-
-#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
-#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
-#define __pfn_to_bus(x) (__pfn_to_phys(x) - PHYS_OFFSET)
-#define __bus_to_pfn(x) __phys_to_pfn((x) + PHYS_OFFSET)
-
-#endif
-
-
-/*
- * Like the SA1100, the EDB7211 has a large gap between physical RAM
- * banks. In 2.2, the Psion (CL-PS7110) port added custom support for
- * discontiguous physical memory. In 2.4, we can use the standard
- * Linux NUMA support.
- *
- * This is not necessary for EP7211 implementations with only one used
- * memory bank. For those systems, simply undefine CONFIG_DISCONTIGMEM.
- */
-
/*
* The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
* uses only one of the two banks (bank #1). However, even within
@@ -54,23 +34,6 @@
* them, so we use 24 for the node max shift to get 16MB node sizes.
*/
-/*
- * Because of the wide memory address space between physical RAM banks on the
- * SA1100, it's much more convenient to use Linux's NUMA support to implement
- * our memory map representation. Assuming all memory nodes have equal access
- * characteristics, we then have generic discontiguous memory support.
- *
- * Of course, all this isn't mandatory for SA1100 implementations with only
- * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM.
- *
- * The nodes are matched with the physical memory bank addresses which are
- * incidentally the same as virtual addresses.
- *
- * node 0: 0xc0000000 - 0xc7ffffff
- * node 1: 0xc8000000 - 0xcfffffff
- * node 2: 0xd0000000 - 0xd7ffffff
- * node 3: 0xd8000000 - 0xdfffffff
- */
#define SECTION_SIZE_BITS 24
#define MAX_PHYSMEM_BITS 32
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 42ee8f3..f266d90 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -86,17 +86,7 @@
iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc));
}
-MACHINE_START(P720T, "ARM-Prospector720T")
- /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .atag_offset = 0x100,
- .fixup = fixup_p720t,
- .map_io = p720t_map_io,
- .init_irq = clps711x_init_irq,
- .timer = &clps711x_timer,
- .restart = clps711x_restart,
-MACHINE_END
-
-static int p720t_hw_init(void)
+static void __init p720t_init_early(void)
{
/*
* Power down as much as possible in case we don't
@@ -111,13 +101,19 @@
PLD_CODEC = 0;
PLD_TCH = 0;
PLD_SPI = 0;
-#ifndef CONFIG_DEBUG_LL
- PLD_COM2 = 0;
- PLD_COM1 = 0;
-#endif
-
- return 0;
+ if (!IS_ENABLED(CONFIG_DEBUG_LL)) {
+ PLD_COM2 = 0;
+ PLD_COM1 = 0;
+ }
}
-__initcall(p720t_hw_init);
-
+MACHINE_START(P720T, "ARM-Prospector720T")
+ /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+ .atag_offset = 0x100,
+ .fixup = fixup_p720t,
+ .init_early = p720t_init_early,
+ .map_io = p720t_map_io,
+ .init_irq = clps711x_init_irq,
+ .timer = &clps711x_timer,
+ .restart = clps711x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 32d837d..2ce1ef0 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -4,6 +4,7 @@
bool
config CP_INTC
+ select IRQ_DOMAIN
bool
config ARCH_DAVINCI_DMx
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 2db78bd..2227eff 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -39,3 +39,4 @@
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_SUSPEND) += pm.o sleep.o
+obj-$(CONFIG_HAVE_CLK) += pm_domain.o
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c
index f83152d..006dae8 100644
--- a/arch/arm/mach-davinci/cp_intc.c
+++ b/arch/arm/mach-davinci/cp_intc.c
@@ -9,9 +9,14 @@
* kind, whether express or implied.
*/
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <mach/common.h>
#include <mach/cp_intc.h>
@@ -28,7 +33,7 @@
static void cp_intc_ack_irq(struct irq_data *d)
{
- cp_intc_write(d->irq, CP_INTC_SYS_STAT_IDX_CLR);
+ cp_intc_write(d->hwirq, CP_INTC_SYS_STAT_IDX_CLR);
}
/* Disable interrupt */
@@ -36,20 +41,20 @@
{
/* XXX don't know why we need to disable nIRQ here... */
cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR);
- cp_intc_write(d->irq, CP_INTC_SYS_ENABLE_IDX_CLR);
+ cp_intc_write(d->hwirq, CP_INTC_SYS_ENABLE_IDX_CLR);
cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
}
/* Enable interrupt */
static void cp_intc_unmask_irq(struct irq_data *d)
{
- cp_intc_write(d->irq, CP_INTC_SYS_ENABLE_IDX_SET);
+ cp_intc_write(d->hwirq, CP_INTC_SYS_ENABLE_IDX_SET);
}
static int cp_intc_set_irq_type(struct irq_data *d, unsigned int flow_type)
{
- unsigned reg = BIT_WORD(d->irq);
- unsigned mask = BIT_MASK(d->irq);
+ unsigned reg = BIT_WORD(d->hwirq);
+ unsigned mask = BIT_MASK(d->hwirq);
unsigned polarity = cp_intc_read(CP_INTC_SYS_POLARITY(reg));
unsigned type = cp_intc_read(CP_INTC_SYS_TYPE(reg));
@@ -99,18 +104,43 @@
.irq_set_wake = cp_intc_set_wake,
};
-void __init cp_intc_init(void)
+static struct irq_domain *cp_intc_domain;
+
+static int cp_intc_host_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
{
- unsigned long num_irq = davinci_soc_info.intc_irq_num;
+ pr_debug("cp_intc_host_map(%d, 0x%lx)\n", virq, hw);
+
+ irq_set_chip(virq, &cp_intc_irq_chip);
+ set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
+ irq_set_handler(virq, handle_edge_irq);
+ return 0;
+}
+
+static const struct irq_domain_ops cp_intc_host_ops = {
+ .map = cp_intc_host_map,
+ .xlate = irq_domain_xlate_onetwocell,
+};
+
+int __init cp_intc_of_init(struct device_node *node, struct device_node *parent)
+{
+ u32 num_irq = davinci_soc_info.intc_irq_num;
u8 *irq_prio = davinci_soc_info.intc_irq_prios;
u32 *host_map = davinci_soc_info.intc_host_map;
unsigned num_reg = BITS_TO_LONGS(num_irq);
- int i;
+ int i, irq_base;
davinci_intc_type = DAVINCI_INTC_TYPE_CP_INTC;
- davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_8K);
+ if (node) {
+ davinci_intc_base = of_iomap(node, 0);
+ if (of_property_read_u32(node, "ti,intc-size", &num_irq))
+ pr_warn("unable to get intc-size, default to %d\n",
+ num_irq);
+ } else {
+ davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_8K);
+ }
if (WARN_ON(!davinci_intc_base))
- return;
+ return -EINVAL;
cp_intc_write(0, CP_INTC_GLOBAL_ENABLE);
@@ -165,13 +195,28 @@
for (i = 0; host_map[i] != -1; i++)
cp_intc_write(host_map[i], CP_INTC_HOST_MAP(i));
- /* Set up genirq dispatching for cp_intc */
- for (i = 0; i < num_irq; i++) {
- irq_set_chip(i, &cp_intc_irq_chip);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
- irq_set_handler(i, handle_edge_irq);
+ irq_base = irq_alloc_descs(-1, 0, num_irq, 0);
+ if (irq_base < 0) {
+ pr_warn("Couldn't allocate IRQ numbers\n");
+ irq_base = 0;
+ }
+
+ /* create a legacy host */
+ cp_intc_domain = irq_domain_add_legacy(node, num_irq,
+ irq_base, 0, &cp_intc_host_ops, NULL);
+
+ if (!cp_intc_domain) {
+ pr_err("cp_intc: failed to allocate irq host!\n");
+ return -EINVAL;
}
/* Enable global interrupt */
cp_intc_write(1, CP_INTC_GLOBAL_ENABLE);
+
+ return 0;
+}
+
+void __init cp_intc_init(void)
+{
+ cp_intc_of_init(NULL, NULL);
}
diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h
index 4e8190e..d13d8df 100644
--- a/arch/arm/mach-davinci/include/mach/cp_intc.h
+++ b/arch/arm/mach-davinci/include/mach/cp_intc.h
@@ -52,5 +52,6 @@
#define CP_INTC_VECTOR_ADDR(n) (0x2000 + (n << 2))
void __init cp_intc_init(void);
+int __init cp_intc_of_init(struct device_node *, struct device_node *);
#endif /* __ASM_HARDWARE_CP_INTC_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h
deleted file mode 100644
index b9bf3d6..0000000
--- a/arch/arm/mach-davinci/include/mach/dm365.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty, remove once unused */
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
deleted file mode 100644
index b9bf3d6..0000000
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty, remove once unused */
diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S
index 768b3c0..cf5f573 100644
--- a/arch/arm/mach-davinci/include/mach/entry-macro.S
+++ b/arch/arm/mach-davinci/include/mach/entry-macro.S
@@ -30,12 +30,10 @@
#endif
#if defined(CONFIG_CP_INTC)
1001: ldr \irqnr, [\base, #0x80] /* get irq number */
+ mov \tmp, \irqnr, lsr #31
and \irqnr, \irqnr, #0xff /* irq is in bits 0-9 */
- mov \tmp, \irqnr, lsr #3
- and \tmp, \tmp, #0xfc
- add \tmp, \tmp, #0x280 /* get the register offset */
- ldr \irqstat, [\base, \tmp] /* get the intc status */
- cmp \irqstat, #0x0
+ and \tmp, \tmp, #0x1
+ cmp \tmp, #0x1
#endif
1002:
.endm
diff --git a/arch/arm/mach-davinci/pm_domain.c b/arch/arm/mach-davinci/pm_domain.c
new file mode 100644
index 0000000..00946e2
--- /dev/null
+++ b/arch/arm/mach-davinci/pm_domain.c
@@ -0,0 +1,64 @@
+/*
+ * Runtime PM support code for DaVinci
+ *
+ * Author: Kevin Hilman
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/init.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_clock.h>
+#include <linux/platform_device.h>
+
+#ifdef CONFIG_PM_RUNTIME
+static int davinci_pm_runtime_suspend(struct device *dev)
+{
+ int ret;
+
+ dev_dbg(dev, "%s\n", __func__);
+
+ ret = pm_generic_runtime_suspend(dev);
+ if (ret)
+ return ret;
+
+ ret = pm_clk_suspend(dev);
+ if (ret) {
+ pm_generic_runtime_resume(dev);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int davinci_pm_runtime_resume(struct device *dev)
+{
+ dev_dbg(dev, "%s\n", __func__);
+
+ pm_clk_resume(dev);
+ return pm_generic_runtime_resume(dev);
+}
+#endif
+
+static struct dev_pm_domain davinci_pm_domain = {
+ .ops = {
+ SET_RUNTIME_PM_OPS(davinci_pm_runtime_suspend,
+ davinci_pm_runtime_resume, NULL)
+ USE_PLATFORM_PM_SLEEP_OPS
+ },
+};
+
+static struct pm_clk_notifier_block platform_bus_notifier = {
+ .pm_domain = &davinci_pm_domain,
+};
+
+static int __init davinci_pm_runtime_init(void)
+{
+ pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
+
+ return 0;
+}
+core_initcall(davinci_pm_runtime_init);
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
index 226949d..f953bb5 100644
--- a/arch/arm/mach-dove/include/mach/bridge-regs.h
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -50,5 +50,6 @@
#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c)
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#endif
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index ad1165d..d52b0ef 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -78,6 +78,7 @@
/* North-South Bridge */
#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000)
/* Cryptographic Engine */
#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000)
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 4dd07a0..4afe52a 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -797,6 +797,102 @@
.resource = ep93xx_wdt_resources,
};
+/*************************************************************************
+ * EP93xx IDE
+ *************************************************************************/
+static struct resource ep93xx_ide_resources[] = {
+ DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE, 0x38),
+ DEFINE_RES_IRQ(IRQ_EP93XX_EXT3),
+};
+
+static struct platform_device ep93xx_ide_device = {
+ .name = "ep93xx-ide",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ep93xx_ide_device.dev.coherent_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(ep93xx_ide_resources),
+ .resource = ep93xx_ide_resources,
+};
+
+void __init ep93xx_register_ide(void)
+{
+ platform_device_register(&ep93xx_ide_device);
+}
+
+int ep93xx_ide_acquire_gpio(struct platform_device *pdev)
+{
+ int err;
+ int i;
+
+ err = gpio_request(EP93XX_GPIO_LINE_EGPIO2, dev_name(&pdev->dev));
+ if (err)
+ return err;
+ err = gpio_request(EP93XX_GPIO_LINE_EGPIO15, dev_name(&pdev->dev));
+ if (err)
+ goto fail_egpio15;
+ for (i = 2; i < 8; i++) {
+ err = gpio_request(EP93XX_GPIO_LINE_E(i), dev_name(&pdev->dev));
+ if (err)
+ goto fail_gpio_e;
+ }
+ for (i = 4; i < 8; i++) {
+ err = gpio_request(EP93XX_GPIO_LINE_G(i), dev_name(&pdev->dev));
+ if (err)
+ goto fail_gpio_g;
+ }
+ for (i = 0; i < 8; i++) {
+ err = gpio_request(EP93XX_GPIO_LINE_H(i), dev_name(&pdev->dev));
+ if (err)
+ goto fail_gpio_h;
+ }
+
+ /* GPIO ports E[7:2], G[7:4] and H used by IDE */
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_EONIDE |
+ EP93XX_SYSCON_DEVCFG_GONIDE |
+ EP93XX_SYSCON_DEVCFG_HONIDE);
+ return 0;
+
+fail_gpio_h:
+ for (--i; i >= 0; --i)
+ gpio_free(EP93XX_GPIO_LINE_H(i));
+ i = 8;
+fail_gpio_g:
+ for (--i; i >= 4; --i)
+ gpio_free(EP93XX_GPIO_LINE_G(i));
+ i = 8;
+fail_gpio_e:
+ for (--i; i >= 2; --i)
+ gpio_free(EP93XX_GPIO_LINE_E(i));
+ gpio_free(EP93XX_GPIO_LINE_EGPIO15);
+fail_egpio15:
+ gpio_free(EP93XX_GPIO_LINE_EGPIO2);
+ return err;
+}
+EXPORT_SYMBOL(ep93xx_ide_acquire_gpio);
+
+void ep93xx_ide_release_gpio(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 2; i < 8; i++)
+ gpio_free(EP93XX_GPIO_LINE_E(i));
+ for (i = 4; i < 8; i++)
+ gpio_free(EP93XX_GPIO_LINE_G(i));
+ for (i = 0; i < 8; i++)
+ gpio_free(EP93XX_GPIO_LINE_H(i));
+ gpio_free(EP93XX_GPIO_LINE_EGPIO15);
+ gpio_free(EP93XX_GPIO_LINE_EGPIO2);
+
+
+ /* GPIO ports E[7:2], G[7:4] and H used by GPIO */
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_EONIDE |
+ EP93XX_SYSCON_DEVCFG_GONIDE |
+ EP93XX_SYSCON_DEVCFG_HONIDE);
+}
+EXPORT_SYMBOL(ep93xx_ide_release_gpio);
+
void __init ep93xx_init_devices(void)
{
/* Disallow access to MaverickCrunch initially */
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index d74c5cd..337ab7c 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -91,8 +91,8 @@
ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
edb93xxa_i2c_board_info,
ARRAY_SIZE(edb93xxa_i2c_board_info));
- } else if (machine_is_edb9307() || machine_is_edb9312() ||
- machine_is_edb9315()) {
+ } else if (machine_is_edb9302() || machine_is_edb9307()
+ || machine_is_edb9312() || machine_is_edb9315()) {
ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
edb93xx_i2c_board_info,
ARRAY_SIZE(edb93xx_i2c_board_info));
@@ -233,6 +233,29 @@
}
+/*************************************************************************
+ * EDB93xx IDE
+ *************************************************************************/
+static int __init edb93xx_has_ide(void)
+{
+ /*
+ * Although EDB9312 and EDB9315 do have IDE capability, they have
+ * INTRQ line wired as pull-up, which makes using IDE interface
+ * problematic.
+ */
+ return machine_is_edb9312() || machine_is_edb9315() ||
+ machine_is_edb9315a();
+}
+
+static void __init edb93xx_register_ide(void)
+{
+ if (!edb93xx_has_ide())
+ return;
+
+ ep93xx_register_ide();
+}
+
+
static void __init edb93xx_init_machine(void)
{
ep93xx_init_devices();
@@ -243,6 +266,7 @@
edb93xx_register_i2s();
edb93xx_register_pwm();
edb93xx_register_fb();
+ edb93xx_register_ide();
}
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 1ecb040..33a5122 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -48,6 +48,9 @@
int ep93xx_i2s_acquire(void);
void ep93xx_i2s_release(void);
void ep93xx_register_ac97(void);
+void ep93xx_register_ide(void);
+int ep93xx_ide_acquire_gpio(struct platform_device *pdev);
+void ep93xx_ide_release_gpio(struct platform_device *pdev);
void ep93xx_init_devices(void);
extern struct sys_timer ep93xx_timer;
diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h
index 979fba7..7bf7ff8 100644
--- a/arch/arm/mach-ep93xx/soc.h
+++ b/arch/arm/mach-ep93xx/soc.h
@@ -69,6 +69,7 @@
#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000)
+#define EP93XX_IDE_PHYS_BASE EP93XX_AHB_PHYS(0x000a0000)
#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000)
#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000)
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 573be57..b5b4c8c 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -207,12 +207,13 @@
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
+ select S3C_DEV_USB_HSOTG
select SAMSUNG_DEV_BACKLIGHT
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_AHCI
select SAMSUNG_DEV_KEYPAD
- select EXYNOS4_DEV_DMA
+ select EXYNOS_DEV_DMA
select SAMSUNG_DEV_PWM
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
@@ -264,7 +265,7 @@
select S5P_DEV_ONENAND
select S5P_DEV_TV
select EXYNOS_DEV_SYSMMU
- select EXYNOS4_DEV_DMA
+ select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
@@ -303,7 +304,7 @@
select S5P_DEV_MFC
select S5P_DEV_USB_EHCI
select S5P_SETUP_MIPIPHY
- select EXYNOS4_DEV_DMA
+ select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
@@ -326,6 +327,7 @@
select S3C_DEV_WDT
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
+ select S3C_DEV_USB_HSOTG
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
@@ -341,7 +343,7 @@
select SAMSUNG_DEV_PWM
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
- select EXYNOS4_DEV_DMA
+ select EXYNOS_DEV_DMA
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_SDHCI
@@ -360,22 +362,27 @@
select S3C_DEV_I2C3
select S3C_DEV_I2C7
select S3C_DEV_RTC
+ select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
+ select S5P_DEV_FIMD0
select S5P_DEV_MFC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select EXYNOS_DEV_SYSMMU
select EXYNOS_DEV_DMA
+ select EXYNOS_DEV_DRM
+ select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C7
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
help
Machine support for Samsung SMDK4212
diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c
index bcb7db4..26fe9de 100644
--- a/arch/arm/mach-exynos/clock-exynos4.c
+++ b/arch/arm/mach-exynos/clock-exynos4.c
@@ -586,17 +586,17 @@
.ctrlbit = (1 << 13),
}, {
.name = "spi",
- .devname = "s3c64xx-spi.0",
+ .devname = "exynos4210-spi.0",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 16),
}, {
.name = "spi",
- .devname = "s3c64xx-spi.1",
+ .devname = "exynos4210-spi.1",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 17),
}, {
.name = "spi",
- .devname = "s3c64xx-spi.2",
+ .devname = "exynos4210-spi.2",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 18),
}, {
@@ -1242,42 +1242,69 @@
.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 },
};
-static struct clksrc_clk exynos4_clk_sclk_spi0 = {
+static struct clksrc_clk exynos4_clk_mdout_spi0 = {
.clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.0",
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 16),
+ .name = "mdout_spi",
+ .devname = "exynos4210-spi.0",
},
.sources = &exynos4_clkset_group,
.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 },
.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 },
};
-static struct clksrc_clk exynos4_clk_sclk_spi1 = {
+static struct clksrc_clk exynos4_clk_mdout_spi1 = {
.clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.1",
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 20),
+ .name = "mdout_spi",
+ .devname = "exynos4210-spi.1",
},
.sources = &exynos4_clkset_group,
.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 },
.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 },
};
-static struct clksrc_clk exynos4_clk_sclk_spi2 = {
+static struct clksrc_clk exynos4_clk_mdout_spi2 = {
.clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.2",
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 24),
+ .name = "mdout_spi",
+ .devname = "exynos4210-spi.2",
},
.sources = &exynos4_clkset_group,
.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 },
.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 },
};
+static struct clksrc_clk exynos4_clk_sclk_spi0 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "exynos4210-spi.0",
+ .parent = &exynos4_clk_mdout_spi0.clk,
+ .enable = exynos4_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_spi1 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "exynos4210-spi.1",
+ .parent = &exynos4_clk_mdout_spi1.clk,
+ .enable = exynos4_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_spi2 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "exynos4210-spi.2",
+ .parent = &exynos4_clk_mdout_spi2.clk,
+ .enable = exynos4_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 8, .size = 8 },
+};
+
/* Clock initialization code */
static struct clksrc_clk *exynos4_sysclks[] = {
&exynos4_clk_mout_apll,
@@ -1331,7 +1358,9 @@
&exynos4_clk_sclk_spi0,
&exynos4_clk_sclk_spi1,
&exynos4_clk_sclk_spi2,
-
+ &exynos4_clk_mdout_spi0,
+ &exynos4_clk_mdout_spi1,
+ &exynos4_clk_mdout_spi2,
};
static struct clk_lookup exynos4_clk_lookup[] = {
@@ -1347,9 +1376,9 @@
CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),
CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1),
- CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk),
- CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk),
- CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk),
+ CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk),
+ CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk),
+ CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk),
};
static int xtal_rate;
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index fefa336..774533c 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -131,6 +131,11 @@
return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable);
}
+static int exynos5_clksrc_mask_peric1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC1, clk, enable);
+}
+
static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable);
@@ -741,6 +746,24 @@
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 14),
}, {
+ .name = "spi",
+ .devname = "exynos4210-spi.0",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "spi",
+ .devname = "exynos4210-spi.1",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 17),
+ }, {
+ .name = "spi",
+ .devname = "exynos4210-spi.2",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 18),
+ }, {
.name = SYSMMU_CLOCK_NAME,
.devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0),
.enable = &exynos5_clk_ip_mfc_ctrl,
@@ -1034,6 +1057,69 @@
.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 },
};
+static struct clksrc_clk exynos5_clk_mdout_spi0 = {
+ .clk = {
+ .name = "mdout_spi",
+ .devname = "exynos4210-spi.0",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 16, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_mdout_spi1 = {
+ .clk = {
+ .name = "mdout_spi",
+ .devname = "exynos4210-spi.1",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 20, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_mdout_spi2 = {
+ .clk = {
+ .name = "mdout_spi",
+ .devname = "exynos4210-spi.2",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 24, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_spi0 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "exynos4210-spi.0",
+ .parent = &exynos5_clk_mdout_spi0.clk,
+ .enable = exynos5_clksrc_mask_peric1_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_spi1 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "exynos4210-spi.1",
+ .parent = &exynos5_clk_mdout_spi1.clk,
+ .enable = exynos5_clksrc_mask_peric1_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_spi2 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "exynos4210-spi.2",
+ .parent = &exynos5_clk_mdout_spi2.clk,
+ .enable = exynos5_clksrc_mask_peric1_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 },
+};
+
static struct clksrc_clk exynos5_clksrcs[] = {
{
.clk = {
@@ -1148,6 +1234,12 @@
&exynos5_clk_dout_mmc4,
&exynos5_clk_aclk_acp,
&exynos5_clk_pclk_acp,
+ &exynos5_clk_sclk_spi0,
+ &exynos5_clk_sclk_spi1,
+ &exynos5_clk_sclk_spi2,
+ &exynos5_clk_mdout_spi0,
+ &exynos5_clk_mdout_spi1,
+ &exynos5_clk_mdout_spi2,
};
static struct clk *exynos5_clk_cdev[] = {
@@ -1176,6 +1268,9 @@
CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
+ CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos5_clk_sclk_spi0.clk),
+ CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos5_clk_sclk_spi1.clk),
+ CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos5_clk_sclk_spi2.clk),
CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 742edd3..4eb39cd 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -540,7 +540,8 @@
.map = combiner_irq_domain_map,
};
-void __init combiner_init(void __iomem *combiner_base, struct device_node *np)
+static void __init combiner_init(void __iomem *combiner_base,
+ struct device_node *np)
{
int i, irq, irq_base;
unsigned int max_nr, nr_irq;
@@ -712,31 +713,6 @@
early_initcall(exynos4_l2x0_cache_init);
#endif
-static int __init exynos5_l2_cache_init(void)
-{
- unsigned int val;
-
- if (!soc_is_exynos5250())
- return 0;
-
- asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
- "bic %0, %0, #(1 << 2)\n" /* cache disable */
- "mcr p15, 0, %0, c1, c0, 0\n"
- "mrc p15, 1, %0, c9, c0, 2\n"
- : "=r"(val));
-
- val |= (1 << 9) | (1 << 5) | (2 << 6) | (2 << 0);
-
- asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val));
- asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
- "orr %0, %0, #(1 << 2)\n" /* cache enable */
- "mcr p15, 0, %0, c1, c0, 0\n"
- : : "r"(val));
-
- return 0;
-}
-early_initcall(exynos5_l2_cache_init);
-
static int __init exynos_init(void)
{
printk(KERN_INFO "EXYNOS: Initializing architecture\n");
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index 7a4b478..35bced6 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -195,6 +195,10 @@
#define IRQ_IIC6 EXYNOS4_IRQ_IIC6
#define IRQ_IIC7 EXYNOS4_IRQ_IIC7
+#define IRQ_SPI0 EXYNOS4_IRQ_SPI0
+#define IRQ_SPI1 EXYNOS4_IRQ_SPI1
+#define IRQ_SPI2 EXYNOS4_IRQ_SPI2
+
#define IRQ_USB_HOST EXYNOS4_IRQ_USB_HOST
#define IRQ_OTG EXYNOS4_IRQ_USB_HSOTG
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index ca4aa89..c72b675 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -154,6 +154,9 @@
#define EXYNOS4_PA_SPI0 0x13920000
#define EXYNOS4_PA_SPI1 0x13930000
#define EXYNOS4_PA_SPI2 0x13940000
+#define EXYNOS5_PA_SPI0 0x12D20000
+#define EXYNOS5_PA_SPI1 0x12D30000
+#define EXYNOS5_PA_SPI2 0x12D40000
#define EXYNOS4_PA_GPIO1 0x11400000
#define EXYNOS4_PA_GPIO2 0x11000000
diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index 43a99e6..d4e392b 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -232,6 +232,11 @@
#define EXYNOS5_USB_CFG S5P_PMUREG(0x0230)
+#define EXYNOS5_AUTO_WDTRESET_DISABLE S5P_PMUREG(0x0408)
+#define EXYNOS5_MASK_WDTRESET_REQUEST S5P_PMUREG(0x040C)
+
+#define EXYNOS5_SYS_WDTRESET (1 << 20)
+
#define EXYNOS5_ARM_CORE0_SYS_PWR_REG S5P_PMUREG(0x1000)
#define EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG S5P_PMUREG(0x1004)
#define EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG S5P_PMUREG(0x1008)
diff --git a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h
index c337cf3..0727773 100644
--- a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h
+++ b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h
@@ -35,11 +35,21 @@
#define PHY1_COMMON_ON_N (1 << 7)
#define PHY0_COMMON_ON_N (1 << 4)
#define PHY0_ID_PULLUP (1 << 2)
-#define CLKSEL_MASK (0x3 << 0)
-#define CLKSEL_SHIFT (0)
-#define CLKSEL_48M (0x0 << 0)
-#define CLKSEL_12M (0x2 << 0)
-#define CLKSEL_24M (0x3 << 0)
+
+#define EXYNOS4_CLKSEL_SHIFT (0)
+
+#define EXYNOS4210_CLKSEL_MASK (0x3 << 0)
+#define EXYNOS4210_CLKSEL_48M (0x0 << 0)
+#define EXYNOS4210_CLKSEL_12M (0x2 << 0)
+#define EXYNOS4210_CLKSEL_24M (0x3 << 0)
+
+#define EXYNOS4X12_CLKSEL_MASK (0x7 << 0)
+#define EXYNOS4X12_CLKSEL_9600K (0x0 << 0)
+#define EXYNOS4X12_CLKSEL_10M (0x1 << 0)
+#define EXYNOS4X12_CLKSEL_12M (0x2 << 0)
+#define EXYNOS4X12_CLKSEL_19200K (0x3 << 0)
+#define EXYNOS4X12_CLKSEL_20M (0x4 << 0)
+#define EXYNOS4X12_CLKSEL_24M (0x5 << 0)
#define EXYNOS4_RSTCON EXYNOS4_HSOTG_PHYREG(0x08)
#define HOST_LINK_PORT_SWRST_MASK (0xf << 6)
diff --git a/arch/arm/mach-exynos/include/mach/spi-clocks.h b/arch/arm/mach-exynos/include/mach/spi-clocks.h
deleted file mode 100644
index c71a5fb..0000000
--- a/arch/arm/mach-exynos/include/mach/spi-clocks.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/spi-clocks.h
- *
- * Copyright (C) 2011 Samsung Electronics Co. Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SPI_CLKS_H
-#define __ASM_ARCH_SPI_CLKS_H __FILE__
-
-/* Must source from SCLK_SPI */
-#define EXYNOS_SPI_SRCCLK_SCLK 0
-
-#endif /* __ASM_ARCH_SPI_CLKS_H */
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index e7e9743..b2b5d5f 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -55,6 +55,12 @@
"exynos4-sdhci.3", NULL),
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
"s3c2440-i2c.0", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0,
+ "exynos4210-spi.0", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1,
+ "exynos4210-spi.1", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI2,
+ "exynos4210-spi.2", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
{},
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index 7b1e11a..ef770bc 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -47,6 +47,12 @@
"s3c2440-i2c.0", NULL),
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
"s3c2440-i2c.1", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0,
+ "exynos4210-spi.0", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1,
+ "exynos4210-spi.1", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2,
+ "exynos4210-spi.2", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 656f8fc..f98a83a8 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -50,7 +50,6 @@
#include <plat/gpio-cfg.h>
#include <plat/iic.h>
#include <plat/mfc.h>
-#include <plat/pd.h>
#include <plat/fimc-core.h>
#include <plat/camport.h>
#include <plat/mipi_csis.h>
@@ -1342,9 +1341,8 @@
static void __init nuri_map_io(void)
{
- clk_xusbxti.rate = 24000000;
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
}
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index f5572be..5a12dc2 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -9,6 +9,7 @@
*/
#include <linux/serial_core.h>
+#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
@@ -21,6 +22,7 @@
#include <linux/mfd/max8997.h>
#include <linux/lcd.h>
#include <linux/rfkill-gpio.h>
+#include <linux/platform_data/s3c-hsotg.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
@@ -38,7 +40,6 @@
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
-#include <plat/pd.h>
#include <plat/fb.h>
#include <plat/mfc.h>
@@ -499,6 +500,37 @@
exynos4_ohci_set_platdata(pdata);
}
+/* USB OTG */
+static struct s3c_hsotg_plat origen_hsotg_pdata;
+
+static struct gpio_led origen_gpio_leds[] = {
+ {
+ .name = "origen::status1",
+ .default_trigger = "heartbeat",
+ .gpio = EXYNOS4_GPX1(3),
+ .active_low = 1,
+ },
+ {
+ .name = "origen::status2",
+ .default_trigger = "mmc0",
+ .gpio = EXYNOS4_GPX1(4),
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data origen_gpio_led_info = {
+ .leds = origen_gpio_leds,
+ .num_leds = ARRAY_SIZE(origen_gpio_leds),
+};
+
+static struct platform_device origen_leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &origen_gpio_led_info,
+ },
+};
+
static struct gpio_keys_button origen_gpio_keys_table[] = {
{
.code = KEY_MENU,
@@ -655,6 +687,7 @@
&s3c_device_hsmmc0,
&s3c_device_i2c0,
&s3c_device_rtc,
+ &s3c_device_usb_hsotg,
&s3c_device_wdt,
&s5p_device_ehci,
&s5p_device_fimc0,
@@ -677,6 +710,7 @@
&exynos4_device_ohci,
&origen_device_gpiokeys,
&origen_lcd_hv070wsa,
+ &origen_leds_gpio,
&origen_device_bluetooth,
};
@@ -712,7 +746,7 @@
static void __init origen_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
}
@@ -744,7 +778,7 @@
origen_ehci_init();
origen_ohci_init();
- clk_xusbxti.rate = 24000000;
+ s3c_hsotg_set_platdata(&origen_hsotg_pdata);
s5p_tv_setup();
s5p_i2c_hdmiphy_set_platdata(NULL);
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index fb09c70..b26beb1 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -13,12 +13,14 @@
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/io.h>
+#include <linux/lcd.h>
#include <linux/mfd/max8997.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/pwm_backlight.h>
#include <linux/regulator/machine.h>
#include <linux/serial_core.h>
+#include <linux/platform_data/s3c-hsotg.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
@@ -28,15 +30,18 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
+#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <plat/iic.h>
#include <plat/keypad.h>
#include <plat/mfc.h>
+#include <plat/regs-fb.h>
#include <plat/regs-serial.h>
#include <plat/sdhci.h>
#include <mach/map.h>
+#include <drm/exynos_drm.h>
#include "common.h"
/* Following are default values for UCON, ULCON and UFCON UART registers */
@@ -219,8 +224,10 @@
static uint32_t smdk4x12_keymap[] __initdata = {
/* KEY(row, col, keycode) */
- KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
- KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
+ KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3),
+ KEY(1, 6, KEY_4), KEY(1, 7, KEY_5),
+ KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B),
+ KEY(0, 7, KEY_E), KEY(0, 5, KEY_C)
};
static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
@@ -230,10 +237,62 @@
static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
.keymap_data = &smdk4x12_keymap_data,
- .rows = 2,
- .cols = 5,
+ .rows = 3,
+ .cols = 8,
};
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+ .panel = {
+ .timing = {
+ .left_margin = 8,
+ .right_margin = 8,
+ .upper_margin = 6,
+ .lower_margin = 6,
+ .hsync_len = 6,
+ .vsync_len = 4,
+ .xres = 480,
+ .yres = 800,
+ },
+ },
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .default_win = 0,
+ .bpp = 32,
+};
+#else
+static struct s3c_fb_pd_win smdk4x12_fb_win0 = {
+ .xres = 480,
+ .yres = 800,
+ .virtual_x = 480,
+ .virtual_y = 800 * 2,
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct fb_videomode smdk4x12_lcd_timing = {
+ .left_margin = 8,
+ .right_margin = 8,
+ .upper_margin = 6,
+ .lower_margin = 6,
+ .hsync_len = 6,
+ .vsync_len = 4,
+ .xres = 480,
+ .yres = 800,
+};
+
+static struct s3c_fb_platdata smdk4x12_lcd_pdata __initdata = {
+ .win[0] = &smdk4x12_fb_win0,
+ .vtiming = &smdk4x12_lcd_timing,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+#endif
+
+/* USB OTG */
+static struct s3c_hsotg_plat smdk4x12_hsotg_pdata;
+
static struct platform_device *smdk4x12_devices[] __initdata = {
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
@@ -242,22 +301,25 @@
&s3c_device_i2c3,
&s3c_device_i2c7,
&s3c_device_rtc,
+ &s3c_device_usb_hsotg,
&s3c_device_wdt,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc3,
&s5p_device_fimc_md,
+ &s5p_device_fimd0,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
+#ifdef CONFIG_DRM_EXYNOS
+ &exynos_device_drm,
+#endif
&samsung_device_keypad,
};
static void __init smdk4x12_map_io(void)
{
- clk_xusbxti.rate = 24000000;
-
exynos_init_io(NULL, 0);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
@@ -293,6 +355,15 @@
s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
+ s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata);
+
+#ifdef CONFIG_DRM_EXYNOS
+ s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+ exynos4_fimd0_gpio_setup_24bpp();
+#else
+ s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata);
+#endif
+
platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
}
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 262e9e4..3cfa688 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -19,6 +19,7 @@
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/pwm_backlight.h>
+#include <linux/platform_data/s3c-hsotg.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
@@ -34,7 +35,6 @@
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/iic.h>
-#include <plat/pd.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
#include <plat/mfc.h>
@@ -271,6 +271,15 @@
exynos4_ohci_set_platdata(pdata);
}
+/* USB OTG */
+static struct s3c_hsotg_plat smdkv310_hsotg_pdata;
+
+/* Audio device */
+static struct platform_device smdkv310_device_audio = {
+ .name = "smdk-audio",
+ .id = -1,
+};
+
static struct platform_device *smdkv310_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
@@ -279,6 +288,7 @@
&s3c_device_i2c1,
&s5p_device_i2c_hdmiphy,
&s3c_device_rtc,
+ &s3c_device_usb_hsotg,
&s3c_device_wdt,
&s5p_device_ehci,
&s5p_device_fimc0,
@@ -302,6 +312,7 @@
&samsung_asoc_dma,
&samsung_asoc_idma,
&s5p_device_fimd0,
+ &smdkv310_device_audio,
&smdkv310_lcd_lte480wv,
&smdkv310_smsc911x,
&exynos4_device_ahci,
@@ -354,7 +365,7 @@
static void __init smdkv310_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
}
@@ -390,7 +401,7 @@
smdkv310_ehci_init();
smdkv310_ohci_init();
- clk_xusbxti.rate = 24000000;
+ s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata);
platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}
@@ -417,5 +428,6 @@
.init_machine = smdkv310_machine_init,
.init_late = exynos_init_late,
.timer = &exynos4_timer,
+ .reserve = &smdkv310_reserve,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index cd92fa8..4d1f40d 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -39,7 +39,6 @@
#include <plat/fb.h>
#include <plat/mfc.h>
#include <plat/sdhci.h>
-#include <plat/pd.h>
#include <plat/regs-fb-v4.h>
#include <plat/fimc-core.h>
#include <plat/s5p-time.h>
@@ -1100,9 +1099,8 @@
static void __init universal_map_io(void)
{
- clk_xusbxti.rate = 24000000;
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
}
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index e9fafcf..373c3c0 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -119,7 +119,9 @@
struct exynos_pm_domain *pd)
{
if (pdev->dev.bus) {
- if (pm_genpd_add_device(&pd->pd, &pdev->dev))
+ if (!pm_genpd_add_device(&pd->pd, &pdev->dev))
+ pm_genpd_dev_need_restore(&pdev->dev, true);
+ else
pr_info("%s: error in adding %s device to %s power"
"domain\n", __func__, dev_name(&pdev->dev),
pd->name);
@@ -151,9 +153,12 @@
if (of_have_populated_dt())
return exynos_pm_dt_parse_domains();
- for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++)
- pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL,
- exynos4_pm_domains[idx]->is_off);
+ for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) {
+ struct exynos_pm_domain *pd = exynos4_pm_domains[idx];
+ int on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;
+
+ pm_genpd_init(&pd->pd, NULL, !on);
+ }
#ifdef CONFIG_S5P_DEV_FIMD0
exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0);
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index 4aacb66..3a48c85 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -315,7 +315,7 @@
{ PMU_TABLE_END,},
};
-void __iomem *exynos5_list_both_cnt_feed[] = {
+static void __iomem *exynos5_list_both_cnt_feed[] = {
EXYNOS5_ARM_CORE0_OPTION,
EXYNOS5_ARM_CORE1_OPTION,
EXYNOS5_ARM_COMMON_OPTION,
@@ -329,7 +329,7 @@
EXYNOS5_TOP_PWR_SYSMEM_OPTION,
};
-void __iomem *exynos5_list_diable_wfi_wfe[] = {
+static void __iomem *exynos5_list_diable_wfi_wfe[] = {
EXYNOS5_ARM_CORE1_OPTION,
EXYNOS5_FSYS_ARM_OPTION,
EXYNOS5_ISP_ARM_OPTION,
@@ -390,6 +390,8 @@
static int __init exynos_pmu_init(void)
{
+ unsigned int value;
+
exynos_pmu_config = exynos4210_pmu_config;
if (soc_is_exynos4210()) {
@@ -399,6 +401,18 @@
exynos_pmu_config = exynos4x12_pmu_config;
pr_info("EXYNOS4x12 PMU Initialize\n");
} else if (soc_is_exynos5250()) {
+ /*
+ * When SYS_WDTRESET is set, watchdog timer reset request
+ * is ignored by power management unit.
+ */
+ value = __raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
+ value &= ~EXYNOS5_SYS_WDTRESET;
+ __raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE);
+
+ value = __raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
+ value &= ~EXYNOS5_SYS_WDTRESET;
+ __raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);
+
exynos_pmu_config = exynos5250_pmu_config;
pr_info("EXYNOS5250 PMU Initialize\n");
} else {
diff --git a/arch/arm/mach-exynos/setup-spi.c b/arch/arm/mach-exynos/setup-spi.c
index 833ff40..4999829 100644
--- a/arch/arm/mach-exynos/setup-spi.c
+++ b/arch/arm/mach-exynos/setup-spi.c
@@ -9,21 +9,10 @@
*/
#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
#include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
-struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
- .fifo_lvl_mask = 0x1ff,
- .rx_lvl_offset = 15,
- .high_speed = 1,
- .clk_from_cmu = true,
- .tx_st_done = 25,
-};
-
-int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+int s3c64xx_spi0_cfg_gpio(void)
{
s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2));
s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP);
@@ -34,15 +23,7 @@
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI1
-struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 15,
- .high_speed = 1,
- .clk_from_cmu = true,
- .tx_st_done = 25,
-};
-
-int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+int s3c64xx_spi1_cfg_gpio(void)
{
s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2));
s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP);
@@ -53,15 +34,7 @@
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI2
-struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 15,
- .high_speed = 1,
- .clk_from_cmu = true,
- .tx_st_done = 25,
-};
-
-int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
+int s3c64xx_spi2_cfg_gpio(void)
{
s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5));
s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP);
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c
index 1af0a7f..b81cc56 100644
--- a/arch/arm/mach-exynos/setup-usb-phy.c
+++ b/arch/arm/mach-exynos/setup-usb-phy.c
@@ -31,27 +31,55 @@
struct clk *xusbxti_clk;
u32 phyclk;
- /* set clock frequency for PLL */
- phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK;
-
xusbxti_clk = clk_get(&pdev->dev, "xusbxti");
if (xusbxti_clk && !IS_ERR(xusbxti_clk)) {
- switch (clk_get_rate(xusbxti_clk)) {
- case 12 * MHZ:
- phyclk |= CLKSEL_12M;
- break;
- case 24 * MHZ:
- phyclk |= CLKSEL_24M;
- break;
- default:
- case 48 * MHZ:
- /* default reference clock */
- break;
+ if (soc_is_exynos4210()) {
+ /* set clock frequency for PLL */
+ phyclk = readl(EXYNOS4_PHYCLK) & ~EXYNOS4210_CLKSEL_MASK;
+
+ switch (clk_get_rate(xusbxti_clk)) {
+ case 12 * MHZ:
+ phyclk |= EXYNOS4210_CLKSEL_12M;
+ break;
+ case 48 * MHZ:
+ phyclk |= EXYNOS4210_CLKSEL_48M;
+ break;
+ default:
+ case 24 * MHZ:
+ phyclk |= EXYNOS4210_CLKSEL_24M;
+ break;
+ }
+ writel(phyclk, EXYNOS4_PHYCLK);
+ } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+ /* set clock frequency for PLL */
+ phyclk = readl(EXYNOS4_PHYCLK) & ~EXYNOS4X12_CLKSEL_MASK;
+
+ switch (clk_get_rate(xusbxti_clk)) {
+ case 9600 * KHZ:
+ phyclk |= EXYNOS4X12_CLKSEL_9600K;
+ break;
+ case 10 * MHZ:
+ phyclk |= EXYNOS4X12_CLKSEL_10M;
+ break;
+ case 12 * MHZ:
+ phyclk |= EXYNOS4X12_CLKSEL_12M;
+ break;
+ case 19200 * KHZ:
+ phyclk |= EXYNOS4X12_CLKSEL_19200K;
+ break;
+ case 20 * MHZ:
+ phyclk |= EXYNOS4X12_CLKSEL_20M;
+ break;
+ default:
+ case 24 * MHZ:
+ /* default reference clock */
+ phyclk |= EXYNOS4X12_CLKSEL_24M;
+ break;
+ }
+ writel(phyclk, EXYNOS4_PHYCLK);
}
clk_put(xusbxti_clk);
}
-
- writel(phyclk, EXYNOS4_PHYCLK);
}
static int exynos4210_usb_phy0_init(struct platform_device *pdev)
diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
index f8437dd2..ded4652 100644
--- a/arch/arm/mach-highbank/Makefile
+++ b/arch/arm/mach-highbank/Makefile
@@ -1,4 +1,8 @@
-obj-y := clock.o highbank.o system.o
+obj-y := clock.o highbank.o system.o smc.o
+
+plus_sec := $(call as-instr,.arch_extension sec,+sec)
+AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec)
+
obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
index d8e2d0b..141ed51 100644
--- a/arch/arm/mach-highbank/core.h
+++ b/arch/arm/mach-highbank/core.h
@@ -8,3 +8,4 @@
static inline void highbank_lluart_map_io(void) {}
#endif
+extern void highbank_smc1(int fn, int arg);
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 410a112..8777612 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -85,10 +85,24 @@
{}
};
+#ifdef CONFIG_CACHE_L2X0
+static void highbank_l2x0_disable(void)
+{
+ /* Disable PL310 L2 Cache controller */
+ highbank_smc1(0x102, 0x0);
+}
+#endif
+
static void __init highbank_init_irq(void)
{
of_irq_init(irq_match);
+
+#ifdef CONFIG_CACHE_L2X0
+ /* Enable PL310 L2 Cache controller */
+ highbank_smc1(0x102, 0x1);
l2x0_of_init(0, ~0UL);
+ outer_cache.disable = highbank_l2x0_disable;
+#endif
}
static void __init highbank_timer_init(void)
diff --git a/arch/arm/mach-highbank/smc.S b/arch/arm/mach-highbank/smc.S
new file mode 100644
index 0000000..407d17b
--- /dev/null
+++ b/arch/arm/mach-highbank/smc.S
@@ -0,0 +1,27 @@
+/*
+ * Copied from omap44xx-smc.S Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright 2012 Calxeda, Inc.
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * This is common routine to manage secure monitor API
+ * used to modify the PL310 secure registers.
+ * 'r0' contains the value to be modified and 'r12' contains
+ * the monitor API number.
+ * Function signature : void highbank_smc1(u32 fn, u32 arg)
+ */
+
+ENTRY(highbank_smc1)
+ stmfd sp!, {r4-r11, lr}
+ mov r12, r0
+ mov r0, r1
+ dsb
+ smc #0
+ ldmfd sp!, {r4-r11, pc}
+ENDPROC(highbank_smc1)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0021f72..afd542a 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -52,6 +52,7 @@
select ARCH_MX25
select COMMON_CLK
select CPU_ARM926T
+ select HAVE_CAN_FLEXCAN if CAN
select ARCH_MXC_IOMUX_V3
select MXC_AVIC
@@ -73,12 +74,13 @@
config SOC_IMX35
bool
- select CPU_V6
+ select CPU_V6K
select ARCH_MXC_IOMUX_V3
select COMMON_CLK
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
+ select HAVE_CAN_FLEXCAN if CAN
config SOC_IMX5
select CPU_V7
@@ -105,6 +107,7 @@
select SOC_IMX5
select ARCH_MX5
select ARCH_MX53
+ select HAVE_CAN_FLEXCAN if CAN
if ARCH_IMX_V4_V5
@@ -158,7 +161,6 @@
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
@@ -380,7 +382,6 @@
config MACH_IMX27_DT
bool "Support i.MX27 platforms from device tree"
select SOC_IMX27
- select USE_OF
help
Include support for Freescale i.MX27 based platforms
using the device tree for discovery
@@ -477,6 +478,7 @@
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
@@ -556,6 +558,14 @@
Include support for BUGBase 1.3 platform. This includes specific
configurations for the board and its peripherals.
+config MACH_IMX31_DT
+ bool "Support i.MX31 platforms from device tree"
+ select SOC_IMX31
+ select USE_OF
+ help
+ Include support for Freescale i.MX31 based platforms
+ using the device tree for discovery.
+
comment "MX35 platforms:"
config MACH_PCM043
@@ -588,6 +598,7 @@
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_MXC_RTC
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
help
Include support for MX35PDK platform. This includes specific
@@ -662,7 +673,6 @@
config MACH_IMX51_DT
bool "Support i.MX51 platforms from device tree"
select SOC_IMX51
- select USE_OF
select MACH_MX51_BABBAGE
help
Include support for Freescale i.MX51 based platforms
@@ -758,7 +768,6 @@
config MACH_IMX53_DT
bool "Support i.MX53 platforms from device tree"
select SOC_IMX53
- select USE_OF
select MACH_MX53_ARD
select MACH_MX53_EVK
select MACH_MX53_LOCO
@@ -825,13 +834,14 @@
select COMMON_CLK
select CPU_V7
select HAVE_ARM_SCU
+ select HAVE_CAN_FLEXCAN if CAN
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select HAVE_SMP
+ select MFD_ANATOP
select PINCTRL
select PINCTRL_IMX6Q
- select USE_OF
help
This enables support for Freescale i.MX6 Quad processor.
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index ff29421..07f7c22 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -57,6 +57,7 @@
obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
obj-$(CONFIG_MACH_BUG) += mach-bug.o
+obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o
# i.MX35 based machines
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
index 0f0beb5..516ddee 100644
--- a/arch/arm/mach-imx/clk-imx1.c
+++ b/arch/arm/mach-imx/clk-imx1.c
@@ -108,8 +108,7 @@
clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0");
clk_register_clkdev(clk[clko], "clko", NULL);
- mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
- MX1_TIM1_INT);
+ mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
return 0;
}
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
index 4e4f384..ea13e61 100644
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -180,7 +180,7 @@
clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
- mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
- MX21_INT_GPT1);
+ mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1);
+
return 0;
}
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index d9833bb..fdd8cc8 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -243,6 +243,6 @@
clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
clk_register_clkdev(clk[iim_ipg], "iim", NULL);
- mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+ mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
}
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 50a7ebd..7aa6313 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -256,18 +256,19 @@
clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL);
clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL);
clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL);
- clk_register_clkdev(clk[rtc_ipg_gate], "rtc", NULL);
+ clk_register_clkdev(clk[rtc_ipg_gate], NULL, "mxc_rtc");
clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
clk_register_clkdev(clk[cpu_div], "cpu", NULL);
clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
- mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
- MX27_INT_GPT1);
+ mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
clk_prepare_enable(clk[emi_ahb_gate]);
+ imx_print_silicon_rev("i.MX27", mx27_revision());
+
return 0;
}
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index a854b9c..8e19e70 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -20,6 +20,7 @@
#include <linux/clkdev.h>
#include <linux/io.h>
#include <linux/err.h>
+#include <linux/of.h>
#include <mach/hardware.h>
#include <mach/mx31.h>
@@ -123,7 +124,7 @@
clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[rtc_gate], "rtc", NULL);
+ clk_register_clkdev(clk[rtc_gate], NULL, "mxc_rtc");
clk_register_clkdev(clk[epit1_gate], "epit", NULL);
clk_register_clkdev(clk[epit2_gate], "epit", NULL);
clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0");
@@ -165,7 +166,7 @@
clk_register_clkdev(clk[firi_gate], "firi", NULL);
clk_register_clkdev(clk[ata_gate], NULL, "pata_imx");
clk_register_clkdev(clk[rtic_gate], "rtic", NULL);
- clk_register_clkdev(clk[rng_gate], "rng", NULL);
+ clk_register_clkdev(clk[rng_gate], NULL, "mxc_rnga");
clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma");
clk_register_clkdev(clk[iim_gate], "iim", NULL);
@@ -175,8 +176,25 @@
mx31_revision();
clk_disable_unprepare(clk[iim_gate]);
- mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
- MX31_INT_GPT);
+ mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT);
return 0;
}
+
+#ifdef CONFIG_OF
+int __init mx31_clocks_init_dt(void)
+{
+ struct device_node *np;
+ u32 fref = 26000000; /* default */
+
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
+ continue;
+
+ if (!of_property_read_u32(np, "clock-frequency", &fref))
+ break;
+ }
+
+ return mx31_clocks_init(fref);
+}
+#endif
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index a9e60bf..c6422fb 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -201,7 +201,6 @@
pr_err("i.MX35 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
-
clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
@@ -264,14 +263,20 @@
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
+ /*
+ * SCC is needed to boot via mmc after a watchdog reset. The clock code
+ * before conversion to common clk also enabled UART1 (which isn't
+ * handled here and not needed for mmc) and IIM (which is enabled
+ * unconditionally above).
+ */
+ clk_prepare_enable(clk[scc_gate]);
+
imx_print_silicon_rev("i.MX35", mx35_revision());
#ifdef CONFIG_MXC_USE_EPIT
- epit_timer_init(&epit1_clk,
- MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
+ epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
#else
- mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR),
- MX35_INT_GPT);
+ mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
#endif
return 0;
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index fcd94f3..f608669 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -58,7 +58,7 @@
tve_s, uart1_ipg_gate, uart1_per_gate, uart2_ipg_gate,
uart2_per_gate, uart3_ipg_gate, uart3_per_gate, i2c1_gate, i2c2_gate,
gpt_ipg_gate, pwm1_ipg_gate, pwm1_hf_gate, pwm2_ipg_gate, pwm2_hf_gate,
- gpt_gate, fec_gate, usboh3_per_gate, esdhc1_ipg_gate, esdhc2_ipg_gate,
+ gpt_hf_gate, fec_gate, usboh3_per_gate, esdhc1_ipg_gate, esdhc2_ipg_gate,
esdhc3_ipg_gate, esdhc4_ipg_gate, ssi1_ipg_gate, ssi2_ipg_gate,
ssi3_ipg_gate, ecspi1_ipg_gate, ecspi1_per_gate, ecspi2_ipg_gate,
ecspi2_per_gate, cspi_ipg_gate, sdma_gate, emi_slow_gate, ipu_s,
@@ -81,6 +81,7 @@
ssi1_root_podf, ssi2_root_pred, ssi2_root_podf, ssi_ext1_pred,
ssi_ext1_podf, ssi_ext2_pred, ssi_ext2_podf, ssi1_root_gate,
ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
+ epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate,
clk_max
};
@@ -104,12 +105,12 @@
periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
main_bus_sel, ARRAY_SIZE(main_bus_sel));
- clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1,
+ clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1,
per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel));
clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2);
clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3);
clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3);
- clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0,
+ clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1,
per_root_sel, ARRAY_SIZE(per_root_sel));
clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3);
clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28);
@@ -167,12 +168,12 @@
clk[uart3_per_gate] = imx_clk_gate2("uart3_per_gate", "uart_root", MXC_CCM_CCGR1, 16);
clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "per_root", MXC_CCM_CCGR1, 18);
clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "per_root", MXC_CCM_CCGR1, 20);
- clk[gpt_ipg_gate] = imx_clk_gate2("gpt_ipg_gate", "ipg", MXC_CCM_CCGR2, 20);
clk[pwm1_ipg_gate] = imx_clk_gate2("pwm1_ipg_gate", "ipg", MXC_CCM_CCGR2, 10);
- clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12);
+ clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "per_root", MXC_CCM_CCGR2, 12);
clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14);
- clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16);
- clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18);
+ clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "per_root", MXC_CCM_CCGR2, 16);
+ clk[gpt_ipg_gate] = imx_clk_gate2("gpt_ipg_gate", "ipg", MXC_CCM_CCGR2, 18);
+ clk[gpt_hf_gate] = imx_clk_gate2("gpt_hf_gate", "per_root", MXC_CCM_CCGR2, 20);
clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24);
clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26);
clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28);
@@ -226,13 +227,17 @@
clk[ssi3_root_gate] = imx_clk_gate2("ssi3_root_gate", "ssi3_root_sel", MXC_CCM_CCGR3, 26);
clk[ssi_ext1_gate] = imx_clk_gate2("ssi_ext1_gate", "ssi_ext1_com_sel", MXC_CCM_CCGR3, 28);
clk[ssi_ext2_gate] = imx_clk_gate2("ssi_ext2_gate", "ssi_ext2_com_sel", MXC_CCM_CCGR3, 30);
+ clk[epit1_ipg_gate] = imx_clk_gate2("epit1_ipg_gate", "ipg", MXC_CCM_CCGR2, 2);
+ clk[epit1_hf_gate] = imx_clk_gate2("epit1_hf_gate", "per_root", MXC_CCM_CCGR2, 4);
+ clk[epit2_ipg_gate] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6);
+ clk[epit2_hf_gate] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8);
for (i = 0; i < ARRAY_SIZE(clk); i++)
if (IS_ERR(clk[i]))
pr_err("i.MX5 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
- clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[gpt_hf_gate], "per", "imx-gpt.0");
clk_register_clkdev(clk[gpt_ipg_gate], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[uart1_per_gate], "per", "imx21-uart.0");
clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
@@ -248,7 +253,7 @@
clk_register_clkdev(clk[ecspi1_ipg_gate], "ipg", "imx51-ecspi.0");
clk_register_clkdev(clk[ecspi2_per_gate], "per", "imx51-ecspi.1");
clk_register_clkdev(clk[ecspi2_ipg_gate], "ipg", "imx51-ecspi.1");
- clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx51-cspi.0");
+ clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx35-cspi.2");
clk_register_clkdev(clk[pwm1_ipg_gate], "pwm", "mxc_pwm.0");
clk_register_clkdev(clk[pwm2_ipg_gate], "pwm", "mxc_pwm.1");
clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
@@ -279,6 +284,11 @@
clk_register_clkdev(clk[dummy], NULL, "imx-keypad");
clk_register_clkdev(clk[tve_gate], NULL, "imx-tve.0");
clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx-tve.0");
+ clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL);
+ clk_register_clkdev(clk[epit1_ipg_gate], "ipg", "imx-epit.0");
+ clk_register_clkdev(clk[epit1_hf_gate], "per", "imx-epit.0");
+ clk_register_clkdev(clk[epit2_ipg_gate], "ipg", "imx-epit.1");
+ clk_register_clkdev(clk[epit2_hf_gate], "per", "imx-epit.1");
/* Set SDHC parents to be PLL2 */
clk_set_parent(clk[esdhc_a_sel], clk[pll2_sw]);
@@ -336,7 +346,6 @@
clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL);
clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0");
clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
- clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL);
clk_register_clkdev(clk[ipu_gate], "bus", "imx51-ipu");
clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx51-ipu");
clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx51-ipu");
@@ -366,8 +375,7 @@
clk_set_rate(clk[esdhc_b_podf], 166250000);
/* System timer */
- mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
- MX51_INT_GPT);
+ mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT);
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX51", mx51_revision());
@@ -452,8 +460,7 @@
clk_set_rate(clk[esdhc_b_podf], 200000000);
/* System timer */
- mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
- MX53_INT_GPT);
+ mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT);
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX53", mx53_revision());
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index cab02d0..ea89520 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -122,10 +122,6 @@
"dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
"ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
-static const char * const clks_init_on[] __initconst = {
- "mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3",
-};
-
enum mx6q_clks {
dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
@@ -151,21 +147,25 @@
esai, gpt_ipg, gpt_ipg_per, gpu2d_core, gpu3d_core, hdmi_iahb,
hdmi_isfr, i2c1, i2c2, i2c3, iim, enfc, ipu1, ipu1_di0, ipu1_di1, ipu2,
ipu2_di0, ldb_di0, ldb_di1, ipu2_di1, hsi_tx, mlb, mmdc_ch0_axi,
- mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4,
+ mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4, per1_bch,
gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1,
ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
- ssi2_ipg, ssi3_ipg, clk_max
+ ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2,
+ clk_max
};
static struct clk *clk[clk_max];
+static enum mx6q_clks const clks_init_on[] __initconst = {
+ mmdc_ch0_axi, rom,
+};
+
int __init mx6q_clocks_init(void)
{
struct device_node *np;
void __iomem *base;
- struct clk *c;
int i, irq;
clk[dummy] = imx_clk_fixed("dummy", 0);
@@ -198,6 +198,9 @@
clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x2000, 0x3);
clk[pll8_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll8_enet", "osc", base + 0xe0, 0x182000, 0x3);
+ clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6);
+ clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6);
+
/* name parent_name reg idx */
clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
@@ -318,7 +321,7 @@
clk[ahb] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
/* name parent_name reg shift */
- clk[apbh_dma] = imx_clk_gate2("apbh_dma", "ahb", base + 0x68, 4);
+ clk[apbh_dma] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
clk[asrc] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6);
clk[can1_ipg] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
clk[can1_serial] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16);
@@ -357,6 +360,7 @@
clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
clk[openvg_axi] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30);
clk[pcie_axi] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0);
+ clk[per1_bch] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12);
clk[pwm1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16);
clk[pwm2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18);
clk[pwm3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20);
@@ -365,6 +369,7 @@
clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
+ clk[rom] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4);
clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
@@ -387,12 +392,21 @@
pr_err("i.MX6q clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
- clk_register_clkdev(clk[mmdc_ch0_axi], NULL, "mmdc_ch0_axi");
- clk_register_clkdev(clk[mmdc_ch1_axi], NULL, "mmdc_ch1_axi");
clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
clk_register_clkdev(clk[twd], NULL, "smp_twd");
- clk_register_clkdev(clk[usboh3], NULL, "usboh3");
+ clk_register_clkdev(clk[apbh_dma], NULL, "110000.dma-apbh");
+ clk_register_clkdev(clk[per1_bch], "per1_bch", "112000.gpmi-nand");
+ clk_register_clkdev(clk[gpmi_bch_apb], "gpmi_bch_apb", "112000.gpmi-nand");
+ clk_register_clkdev(clk[gpmi_bch], "gpmi_bch", "112000.gpmi-nand");
+ clk_register_clkdev(clk[gpmi_apb], "gpmi_apb", "112000.gpmi-nand");
+ clk_register_clkdev(clk[gpmi_io], "gpmi_io", "112000.gpmi-nand");
+ clk_register_clkdev(clk[usboh3], NULL, "2184000.usb");
+ clk_register_clkdev(clk[usboh3], NULL, "2184200.usb");
+ clk_register_clkdev(clk[usboh3], NULL, "2184400.usb");
+ clk_register_clkdev(clk[usboh3], NULL, "2184600.usb");
+ clk_register_clkdev(clk[usbphy1], NULL, "20c9000.usbphy");
+ clk_register_clkdev(clk[usbphy2], NULL, "20ca000.usbphy");
clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");
@@ -424,21 +438,14 @@
clk_register_clkdev(clk[ahb], "ahb", NULL);
clk_register_clkdev(clk[cko1], "cko1", NULL);
- for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
- c = clk_get_sys(clks_init_on[i], NULL);
- if (IS_ERR(c)) {
- pr_err("%s: failed to get clk %s", __func__,
- clks_init_on[i]);
- return PTR_ERR(c);
- }
- clk_prepare_enable(c);
- }
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clk[clks_init_on[i]]);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(NULL, base, irq);
+ mxc_timer_init(base, irq);
return 0;
}
diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c
index 4685919..0440379 100644
--- a/arch/arm/mach-imx/clk-pllv2.c
+++ b/arch/arm/mach-imx/clk-pllv2.c
@@ -74,30 +74,15 @@
void __iomem *base;
};
-static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate,
+ u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn)
{
long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
- unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
- void __iomem *pllbase;
+ unsigned long dbl;
s64 temp;
- struct clk_pllv2 *pll = to_clk_pllv2(hw);
- pllbase = pll->base;
-
- dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
- if (pll_hfsm == 0) {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
- } else {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
- }
pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
mfi = (mfi <= 5) ? 5 : mfi;
@@ -123,18 +108,30 @@
return temp;
}
-static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
- struct clk_pllv2 *pll = to_clk_pllv2(hw);
- u32 reg;
+ u32 dp_op, dp_mfd, dp_mfn, dp_ctl;
void __iomem *pllbase;
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+
+ pllbase = pll->base;
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+
+ return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn);
+}
+
+static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate,
+ u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn)
+{
+ u32 reg;
long mfi, pdf, mfn, mfd = 999999;
s64 temp64;
unsigned long quad_parent_rate;
- unsigned long pll_hfsm, dp_ctl;
-
- pllbase = pll->base;
quad_parent_rate = 4 * parent_rate;
pdf = mfi = -1;
@@ -144,25 +141,41 @@
return -EINVAL;
pdf--;
- temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
- do_div(temp64, quad_parent_rate/1000000);
+ temp64 = rate * (pdf + 1) - quad_parent_rate * mfi;
+ do_div(temp64, quad_parent_rate / 1000000);
mfn = (long)temp64;
+ reg = mfi << 4 | pdf;
+
+ *dp_op = reg;
+ *dp_mfd = mfd;
+ *dp_mfn = mfn;
+
+ return 0;
+}
+
+static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+ void __iomem *pllbase;
+ u32 dp_ctl, dp_op, dp_mfd, dp_mfn;
+ int ret;
+
+ pllbase = pll->base;
+
+
+ ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn);
+ if (ret)
+ return ret;
+
dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
/* use dpdck0_2 */
__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
- if (pll_hfsm == 0) {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
- } else {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
- }
+
+ __raw_writel(dp_op, pllbase + MXC_PLL_DP_OP);
+ __raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD);
+ __raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN);
return 0;
}
@@ -170,7 +183,11 @@
static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
- return rate;
+ u32 dp_op, dp_mfd, dp_mfn;
+
+ __clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn);
+ return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN,
+ dp_op, dp_mfd, dp_mfn);
}
static int clk_pllv2_prepare(struct clk_hw *hw)
diff --git a/arch/arm/mach-imx/crm-regs-imx5.h b/arch/arm/mach-imx/crm-regs-imx5.h
index 5e11ba7..5e3f1f0 100644
--- a/arch/arm/mach-imx/crm-regs-imx5.h
+++ b/arch/arm/mach-imx/crm-regs-imx5.h
@@ -23,7 +23,7 @@
#define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
#define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
#define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
+#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
/* PLL Register Offsets */
#define MXC_PLL_DP_CTL 0x00
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
index 2628e0c..93ece55 100644
--- a/arch/arm/mach-imx/devices-imx21.h
+++ b/arch/arm/mach-imx/devices-imx21.h
@@ -14,7 +14,7 @@
imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata)
extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data;
-#define imx21_add_imx2_wdt(pdata) \
+#define imx21_add_imx2_wdt() \
imx_add_imx2_wdt(&imx21_imx2_wdt_data)
extern const struct imx_imx_fb_data imx21_imx_fb_data;
@@ -50,7 +50,7 @@
imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
extern const struct imx_mxc_w1_data imx21_mxc_w1_data;
-#define imx21_add_mxc_w1(pdata) \
+#define imx21_add_mxc_w1() \
imx_add_mxc_w1(&imx21_mxc_w1_data)
extern const struct imx_spi_imx_data imx21_cspi_data[];
diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h
index efa0761..f8e03dd 100644
--- a/arch/arm/mach-imx/devices-imx25.h
+++ b/arch/arm/mach-imx/devices-imx25.h
@@ -24,11 +24,11 @@
imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data;
-#define imx25_add_imxdi_rtc(pdata) \
+#define imx25_add_imxdi_rtc() \
imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data;
-#define imx25_add_imx2_wdt(pdata) \
+#define imx25_add_imx2_wdt() \
imx_add_imx2_wdt(&imx25_imx2_wdt_data)
extern const struct imx_imx_fb_data imx25_imx_fb_data;
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
index 28537a5..436c572 100644
--- a/arch/arm/mach-imx/devices-imx27.h
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -18,7 +18,7 @@
imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata)
extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data;
-#define imx27_add_imx2_wdt(pdata) \
+#define imx27_add_imx2_wdt() \
imx_add_imx2_wdt(&imx27_imx2_wdt_data)
extern const struct imx_imx_fb_data imx27_imx_fb_data;
@@ -50,7 +50,7 @@
extern const struct imx_mx2_camera_data imx27_mx2_camera_data;
#define imx27_add_mx2_camera(pdata) \
imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
-#define imx27_add_mx2_emmaprp(pdata) \
+#define imx27_add_mx2_emmaprp() \
imx_add_mx2_emmaprp(&imx27_mx2_camera_data)
extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data;
@@ -69,7 +69,7 @@
imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
extern const struct imx_mxc_w1_data imx27_mxc_w1_data;
-#define imx27_add_mxc_w1(pdata) \
+#define imx27_add_mxc_w1() \
imx_add_mxc_w1(&imx27_mxc_w1_data)
extern const struct imx_spi_imx_data imx27_cspi_data[];
diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h
index 488e241..8b2ceb4 100644
--- a/arch/arm/mach-imx/devices-imx31.h
+++ b/arch/arm/mach-imx/devices-imx31.h
@@ -14,7 +14,7 @@
imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data;
-#define imx31_add_imx2_wdt(pdata) \
+#define imx31_add_imx2_wdt() \
imx_add_imx2_wdt(&imx31_imx2_wdt_data)
extern const struct imx_imx_i2c_data imx31_imx_i2c_data[];
@@ -42,8 +42,8 @@
#define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata)
extern const struct imx_ipu_core_data imx31_ipu_core_data;
-#define imx31_add_ipu_core(pdata) \
- imx_add_ipu_core(&imx31_ipu_core_data, pdata)
+#define imx31_add_ipu_core() \
+ imx_add_ipu_core(&imx31_ipu_core_data)
#define imx31_alloc_mx3_camera(pdata) \
imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata)
#define imx31_add_mx3_sdc_fb(pdata) \
@@ -65,11 +65,11 @@
imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data;
-#define imx31_add_mxc_rtc(pdata) \
+#define imx31_add_mxc_rtc() \
imx_add_mxc_rtc(&imx31_mxc_rtc_data)
extern const struct imx_mxc_w1_data imx31_mxc_w1_data;
-#define imx31_add_mxc_w1(pdata) \
+#define imx31_add_mxc_w1() \
imx_add_mxc_w1(&imx31_mxc_w1_data)
extern const struct imx_spi_imx_data imx31_cspi_data[];
diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h
index 7b99ef0..c3e9f20 100644
--- a/arch/arm/mach-imx/devices-imx35.h
+++ b/arch/arm/mach-imx/devices-imx35.h
@@ -24,7 +24,7 @@
#define imx35_add_flexcan1(pdata) imx35_add_flexcan(1, pdata)
extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data;
-#define imx35_add_imx2_wdt(pdata) \
+#define imx35_add_imx2_wdt() \
imx_add_imx2_wdt(&imx35_imx2_wdt_data)
extern const struct imx_imx_i2c_data imx35_imx_i2c_data[];
@@ -50,8 +50,8 @@
#define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata)
extern const struct imx_ipu_core_data imx35_ipu_core_data;
-#define imx35_add_ipu_core(pdata) \
- imx_add_ipu_core(&imx35_ipu_core_data, pdata)
+#define imx35_add_ipu_core() \
+ imx_add_ipu_core(&imx35_ipu_core_data)
#define imx35_alloc_mx3_camera(pdata) \
imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata)
#define imx35_add_mx3_sdc_fb(pdata) \
@@ -68,8 +68,12 @@
#define imx35_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
+extern const struct imx_mxc_rtc_data imx35_mxc_rtc_data;
+#define imx35_add_mxc_rtc() \
+ imx_add_mxc_rtc(&imx35_mxc_rtc_data)
+
extern const struct imx_mxc_w1_data imx35_mxc_w1_data;
-#define imx35_add_mxc_w1(pdata) \
+#define imx35_add_mxc_w1() \
imx_add_mxc_w1(&imx35_mxc_w1_data)
extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[];
diff --git a/arch/arm/mach-imx/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h
index af488bc..9f17187 100644
--- a/arch/arm/mach-imx/devices-imx51.h
+++ b/arch/arm/mach-imx/devices-imx51.h
@@ -55,7 +55,7 @@
imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[];
-#define imx51_add_imx2_wdt(id, pdata) \
+#define imx51_add_imx2_wdt(id) \
imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[];
diff --git a/arch/arm/mach-imx/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h
index 6e1e5d1..77e0db9 100644
--- a/arch/arm/mach-imx/devices-imx53.h
+++ b/arch/arm/mach-imx/devices-imx53.h
@@ -30,7 +30,7 @@
imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[];
-#define imx53_add_imx2_wdt(id, pdata) \
+#define imx53_add_imx2_wdt(id) \
imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c
index 865daf0..05bb41d 100644
--- a/arch/arm/mach-imx/ehci-imx25.c
+++ b/arch/arm/mach-imx/ehci-imx25.c
@@ -24,14 +24,18 @@
#define MX25_OTG_SIC_SHIFT 29
#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT)
#define MX25_OTG_PM_BIT (1 << 24)
+#define MX25_OTG_PP_BIT (1 << 11)
+#define MX25_OTG_OCPOL_BIT (1 << 3)
#define MX25_H1_SIC_SHIFT 21
#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT)
+#define MX25_H1_PP_BIT (1 << 18)
#define MX25_H1_PM_BIT (1 << 8)
#define MX25_H1_IPPUE_UP_BIT (1 << 7)
#define MX25_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX25_H1_TLL_BIT (1 << 5)
#define MX25_H1_USBTE_BIT (1 << 4)
+#define MX25_H1_OCPOL_BIT (1 << 2)
int mx25_initialize_usb_hw(int port, unsigned int flags)
{
@@ -41,21 +45,35 @@
switch (port) {
case 0: /* OTG port */
- v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT);
+ v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT |
+ MX25_OTG_OCPOL_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX25_OTG_PM_BIT;
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX25_OTG_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX25_OTG_OCPOL_BIT;
+
break;
case 1: /* H1 port */
- v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_TLL_BIT |
- MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT);
+ v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT |
+ MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT |
+ MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX25_H1_PM_BIT;
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX25_H1_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX25_H1_OCPOL_BIT;
+
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX25_H1_TLL_BIT;
diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c
index 001ec39..73574c3 100644
--- a/arch/arm/mach-imx/ehci-imx35.c
+++ b/arch/arm/mach-imx/ehci-imx35.c
@@ -24,14 +24,18 @@
#define MX35_OTG_SIC_SHIFT 29
#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT)
#define MX35_OTG_PM_BIT (1 << 24)
+#define MX35_OTG_PP_BIT (1 << 11)
+#define MX35_OTG_OCPOL_BIT (1 << 3)
#define MX35_H1_SIC_SHIFT 21
#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PP_BIT (1 << 18)
#define MX35_H1_PM_BIT (1 << 8)
#define MX35_H1_IPPUE_UP_BIT (1 << 7)
#define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX35_H1_TLL_BIT (1 << 5)
#define MX35_H1_USBTE_BIT (1 << 4)
+#define MX35_H1_OCPOL_BIT (1 << 2)
int mx35_initialize_usb_hw(int port, unsigned int flags)
{
@@ -41,21 +45,35 @@
switch (port) {
case 0: /* OTG port */
- v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
+ v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT |
+ MX35_OTG_OCPOL_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_OTG_PM_BIT;
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX35_OTG_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX35_OTG_OCPOL_BIT;
+
break;
case 1: /* H1 port */
- v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
- MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+ v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT |
+ MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT | MX35_H1_USBTE_BIT |
+ MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_H1_PM_BIT;
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX35_H1_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX35_H1_OCPOL_BIT;
+
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX35_H1_TLL_BIT;
diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c
index c17fa13..a6a4afb 100644
--- a/arch/arm/mach-imx/ehci-imx5.c
+++ b/arch/arm/mach-imx/ehci-imx5.c
@@ -28,11 +28,14 @@
#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */
#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */
#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */
-#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */
+#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */
/* USB_PHY_CTRL_FUNC */
+#define MXC_OTG_PHYCTRL_OC_POL_BIT (1 << 9) /* OTG Polarity of Overcurrent */
#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */
+#define MXC_H1_OC_POL_BIT (1 << 6) /* UH1 Polarity of Overcurrent */
#define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */
+#define MXC_OTG_PHYCTRL_PWR_POL_BIT (1 << 3) /* OTG Power Pin Polarity */
/* USBH2CTRL */
#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8)
@@ -80,13 +83,21 @@
if (flags & MXC_EHCI_INTERNAL_PHY) {
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+ if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+ v |= MXC_OTG_PHYCTRL_OC_POL_BIT;
+ else
+ v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT;
if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
- /* OC/USBPWR is not used */
- v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
- } else {
/* OC/USBPWR is used */
v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
+ } else {
+ /* OC/USBPWR is not used */
+ v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
}
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MXC_OTG_PHYCTRL_PWR_POL_BIT;
+ else
+ v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT;
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
@@ -95,9 +106,9 @@
else
v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v |= MXC_OTG_UCTRL_OPM_BIT;
- else
v &= ~MXC_OTG_UCTRL_OPM_BIT;
+ else
+ v |= MXC_OTG_UCTRL_OPM_BIT;
__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
}
break;
@@ -113,12 +124,16 @@
}
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
+ v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask unused*/
else
v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+ if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+ v |= MXC_H1_OC_POL_BIT;
+ else
+ v &= ~MXC_H1_OC_POL_BIT;
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
else
@@ -142,7 +157,7 @@
}
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
+ v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask unused*/
else
v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index b46cab0..fd3177f 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -266,7 +266,7 @@
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 1500000,
- .irq = IRQ_GPIOD(25),
+ /* irq number is run-time assigned */
.platform_data = &ads7846_config,
.mode = SPI_MODE_2,
},
@@ -329,6 +329,7 @@
/* SPI_CS0 init */
mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
+ eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25));
spi_register_board_info(eukrea_mbimx27_spi_board_info,
ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
index 557f6c48..6e9dd12 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
@@ -95,10 +95,6 @@
},
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "CMO-QVGA",
.mode = fb_modedb,
@@ -287,7 +283,7 @@
printk(KERN_ERR "error setting mbimxsd pads !\n");
imx35_add_imx_uart1(&uart_pdata);
- imx35_add_ipu_core(&mx3_ipu_data);
+ imx35_add_ipu_core();
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 89493ab..20ed2d5 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -12,6 +12,7 @@
#include <linux/errno.h>
#include <asm/cacheflush.h>
+#include <asm/cp15.h>
#include <mach/common.h>
int platform_cpu_kill(unsigned int cpu)
@@ -19,6 +20,44 @@
return 1;
}
+static inline void cpu_enter_lowpower(void)
+{
+ unsigned int v;
+
+ flush_cache_all();
+ asm volatile(
+ "mcr p15, 0, %1, c7, c5, 0\n"
+ " mcr p15, 0, %1, c7, c10, 4\n"
+ /*
+ * Turn off coherency
+ */
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " bic %0, %0, %3\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " bic %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ : "=&r" (v)
+ : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+ unsigned int v;
+
+ asm volatile(
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ " orr %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " orr %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ : "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+
/*
* platform-specific code to shutdown a CPU
*
@@ -26,9 +65,10 @@
*/
void platform_cpu_die(unsigned int cpu)
{
- flush_cache_all();
+ cpu_enter_lowpower();
imx_enable_cpu(cpu, false);
cpu_do_idle();
+ cpu_leave_lowpower();
/* We should never return from idle */
panic("cpu %d unexpectedly exit from shutdown\n", cpu);
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index eee0cc8..e80d523 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -10,7 +10,6 @@
*/
#include <linux/irq.h>
-#include <linux/irqdomain.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
@@ -33,35 +32,8 @@
{ /* sentinel */ }
};
-static int __init imx27_avic_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL);
- return 0;
-}
-
-static int __init imx27_gpio_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
-
- gpio_irq_base -= 32;
- irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
- NULL);
-
- return 0;
-}
-
-static const struct of_device_id imx27_irq_match[] __initconst = {
- { .compatible = "fsl,imx27-avic", .data = imx27_avic_add_irq_domain, },
- { .compatible = "fsl,imx27-gpio", .data = imx27_gpio_add_irq_domain, },
- { /* sentinel */ }
-};
-
static void __init imx27_dt_init(void)
{
- of_irq_init(imx27_irq_match);
-
of_platform_populate(NULL, of_default_bus_match_table,
imx27_auxdata_lookup, NULL);
}
@@ -75,7 +47,7 @@
.init = imx27_timer_init,
};
-static const char *imx27_dt_board_compat[] __initdata = {
+static const char * const imx27_dt_board_compat[] __initconst = {
"fsl,imx27",
NULL
};
diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c
new file mode 100644
index 0000000..a68ba20
--- /dev/null
+++ b/arch/arm/mach-imx/imx31-dt.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mx31.h>
+
+static const struct of_dev_auxdata imx31_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART1_BASE_ADDR,
+ "imx21-uart.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART2_BASE_ADDR,
+ "imx21-uart.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART3_BASE_ADDR,
+ "imx21-uart.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART4_BASE_ADDR,
+ "imx21-uart.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART5_BASE_ADDR,
+ "imx21-uart.4", NULL),
+ { /* sentinel */ }
+};
+
+static void __init imx31_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx31_auxdata_lookup, NULL);
+}
+
+static void __init imx31_timer_init(void)
+{
+ mx31_clocks_init_dt();
+}
+
+static struct sys_timer imx31_timer = {
+ .init = imx31_timer_init,
+};
+
+static const char *imx31_dt_board_compat[] __initdata = {
+ "fsl,imx31",
+ NULL
+};
+
+DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
+ .map_io = mx31_map_io,
+ .init_early = imx31_init_early,
+ .init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
+ .timer = &imx31_timer,
+ .init_machine = imx31_dt_init,
+ .dt_compat = imx31_dt_board_compat,
+ .restart = mxc_restart,
+MACHINE_END
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 18e78db..d4067fe 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -11,7 +11,6 @@
*/
#include <linux/irq.h>
-#include <linux/irqdomain.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/pinctrl/machine.h>
@@ -45,30 +44,6 @@
{ /* sentinel */ }
};
-static int __init imx51_tzic_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL);
- return 0;
-}
-
-static int __init imx51_gpio_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
-
- gpio_irq_base -= 32;
- irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
-
- return 0;
-}
-
-static const struct of_device_id imx51_irq_match[] __initconst = {
- { .compatible = "fsl,imx51-tzic", .data = imx51_tzic_add_irq_domain, },
- { .compatible = "fsl,imx51-gpio", .data = imx51_gpio_add_irq_domain, },
- { /* sentinel */ }
-};
-
static const struct of_device_id imx51_iomuxc_of_match[] __initconst = {
{ .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, },
{ /* sentinel */ }
@@ -80,8 +55,6 @@
const struct of_device_id *of_id;
void (*func)(void);
- of_irq_init(imx51_irq_match);
-
pinctrl_provide_dummies();
node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c
index eb04b62..1b7a2fc 100644
--- a/arch/arm/mach-imx/imx53-dt.c
+++ b/arch/arm/mach-imx/imx53-dt.c
@@ -15,7 +15,6 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/irq.h>
-#include <linux/irqdomain.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/pinctrl/machine.h>
@@ -52,30 +51,6 @@
{ /* sentinel */ }
};
-static int __init imx53_tzic_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL);
- return 0;
-}
-
-static int __init imx53_gpio_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
-
- gpio_irq_base -= 32;
- irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
-
- return 0;
-}
-
-static const struct of_device_id imx53_irq_match[] __initconst = {
- { .compatible = "fsl,imx53-tzic", .data = imx53_tzic_add_irq_domain, },
- { .compatible = "fsl,imx53-gpio", .data = imx53_gpio_add_irq_domain, },
- { /* sentinel */ }
-};
-
static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
{ .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, },
{ .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, },
@@ -103,8 +78,6 @@
const struct of_device_id *of_id;
void (*func)(void);
- of_irq_init(imx53_irq_match);
-
pinctrl_provide_dummies();
node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
@@ -147,6 +120,7 @@
.handle_irq = imx53_handle_irq,
.timer = &imx53_timer,
.init_machine = imx53_dt_init,
+ .init_late = imx53_init_late,
.dt_compat = imx53_dt_board_compat,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index f4a63ee..7b99a79 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/dm9000.h>
+#include <linux/gpio.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
@@ -26,7 +27,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <mach/iomux-mx1.h>
#include "devices-imx1.h"
@@ -87,8 +87,7 @@
.end = MX1_CS4_PHYS + 0x00C00003,
.flags = IORESOURCE_MEM,
}, {
- .start = IRQ_GPIOB(14),
- .end = IRQ_GPIOB(14),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
@@ -129,6 +128,8 @@
imx1_add_imx_i2c(&apf9328_i2c_data);
+ dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14));
+ dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14));
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index c650145..2c6ab32 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -367,10 +367,6 @@
},
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "CRT-VGA",
.mode = fb_modedb,
@@ -408,7 +404,8 @@
gpio_direction_input(gpio_wp);
/* When supported the trigger type have to be BOTH */
- ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
+ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)),
+ detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"sdhc-detect", data);
@@ -429,7 +426,7 @@
static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
+ free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), data);
gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
}
@@ -450,8 +447,7 @@
.end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
@@ -498,6 +494,10 @@
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+ armadillo5x0_smc911x_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
+ armadillo5x0_smc911x_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
platform_add_devices(devices, ARRAY_SIZE(devices));
imx_add_gpio_keys(&armadillo5x0_button_data);
imx31_add_imx_i2c1(NULL);
@@ -513,7 +513,7 @@
imx31_add_mxc_mmc(0, &sdhc_pdata);
/* Register FB */
- imx31_add_ipu_core(&mx3_ipu_data);
+ imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
/* Register NOR Flash */
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index d085aea..2bb9e18 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -169,28 +169,28 @@
static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
- .irq = IRQ_GPIOB(23),
+ /* irq number is run-time assigned */
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
- .irq = IRQ_GPIOB(22),
+ /* irq number is run-time assigned */
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
- .irq = IRQ_GPIOB(27),
+ /* irq number is run-time assigned */
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
- .irq = IRQ_GPIOB(30),
+ /* irq number is run-time assigned */
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
@@ -233,18 +233,18 @@
.phy_mode = FSL_USB2_PHY_ULPI,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init eukrea_cpuimx27_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", eukrea_cpuimx27_otg_mode);
@@ -266,8 +266,8 @@
imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
- imx27_add_imx2_wdt(NULL);
- imx27_add_mxc_w1(NULL);
+ imx27_add_imx2_wdt();
+ imx27_add_mxc_w1();
#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
/* SDHC2 can be used for Wifi */
@@ -279,6 +279,10 @@
#endif
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+ serial_platform_data[0].irq = IMX_GPIO_NR(2, 23);
+ serial_platform_data[1].irq = IMX_GPIO_NR(2, 22);
+ serial_platform_data[2].irq = IMX_GPIO_NR(2, 27);
+ serial_platform_data[3].irq = IMX_GPIO_NR(2, 30);
platform_device_register(&serial_device);
#endif
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index c515f8e..d49b0ec 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -70,9 +70,8 @@
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("tsc2007", 0x48),
- .type = "tsc2007",
.platform_data = &tsc2007_info,
- .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
+ /* irq number is run-time assigned */
},
};
@@ -142,18 +141,18 @@
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init eukrea_cpuimx35_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", eukrea_cpuimx35_otg_mode);
@@ -168,11 +167,12 @@
ARRAY_SIZE(eukrea_cpuimx35_pads));
imx35_add_fec(NULL);
- imx35_add_imx2_wdt(NULL);
+ imx35_add_imx2_wdt();
imx35_add_imx_uart0(&uart_pdata);
imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
+ eukrea_cpuimx35_i2c_devices[1].irq = gpio_to_irq(TSC2007_IRQGPIO);
i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
index ac50f16..b87cc49 100644
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ b/arch/arm/mach-imx/mach-cpuimx51sd.c
@@ -142,7 +142,6 @@
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("tsc2007", 0x49),
- .type = "tsc2007",
.platform_data = &tsc2007_info,
},
};
@@ -218,18 +217,18 @@
.portsc = MXC_EHCI_MODE_ULPI,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init eukrea_cpuimx51sd_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", eukrea_cpuimx51sd_otg_mode);
@@ -259,7 +258,7 @@
.mode = SPI_MODE_0,
.chip_select = 0,
.platform_data = &mcp251x_info,
- .irq = IMX_GPIO_TO_IRQ(CAN_IRQGPIO)
+ /* irq number is run-time assigned */
},
};
@@ -293,7 +292,7 @@
imx51_add_imx_uart(0, &uart_pdata);
imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
- imx51_add_imx2_wdt(0, NULL);
+ imx51_add_imx2_wdt(0);
gpio_request(ETH_RST, "eth_rst");
gpio_set_value(ETH_RST, 1);
@@ -310,6 +309,7 @@
msleep(20);
gpio_set_value(CAN_RST, 1);
imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata);
+ cpuimx51sd_spi_device[0].irq = gpio_to_irq(CAN_IRQGPIO);
spi_register_board_info(cpuimx51sd_spi_device,
ARRAY_SIZE(cpuimx51sd_spi_device));
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index d1e04e6..017bbb7 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -109,18 +109,18 @@
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init eukrea_cpuimx25_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", eukrea_cpuimx25_otg_mode);
@@ -134,9 +134,9 @@
imx25_add_imx_uart0(&uart_pdata);
imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
- imx25_add_imxdi_rtc(NULL);
+ imx25_add_imxdi_rtc();
imx25_add_fec(&mx25_fec_pdata);
- imx25_add_imx2_wdt(NULL);
+ imx25_add_imx2_wdt();
i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index dff82eb..f264ddd 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -38,8 +38,9 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <asm/system.h>
+#include <asm/system_info.h>
#include <mach/common.h>
+#include <mach/hardware.h>
#include <mach/iomux-mx27.h>
#include "devices-imx27.h"
@@ -47,7 +48,7 @@
#define TVP5150_RSTN (GPIO_PORTC + 18)
#define TVP5150_PWDN (GPIO_PORTC + 19)
#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
-#define SDHC1_IRQ IRQ_GPIOB(25)
+#define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25)
#define MOTHERBOARD_BIT2 (GPIO_PORTD + 31)
#define MOTHERBOARD_BIT1 (GPIO_PORTD + 30)
@@ -116,6 +117,8 @@
PB23_PF_USB_PWR,
PB24_PF_USB_OC,
/* CSI */
+ TVP5150_RSTN | GPIO_GPIO | GPIO_OUT,
+ TVP5150_PWDN | GPIO_GPIO | GPIO_OUT,
PB10_PF_CSI_D0,
PB11_PF_CSI_D1,
PB12_PF_CSI_D2,
@@ -147,6 +150,24 @@
{ MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
};
+static const struct gpio visstrim_m10_gpios[] __initconst = {
+ {
+ .gpio = TVP5150_RSTN,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
+ .label = "tvp5150_rstn",
+ },
+ {
+ .gpio = TVP5150_PWDN,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+ .label = "tvp5150_pwdn",
+ },
+ {
+ .gpio = OTG_PHY_CS_GPIO,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+ .label = "usbotg_cs",
+ },
+};
+
/* Camera */
static int visstrim_camera_power(struct device *dev, int on)
{
@@ -190,13 +211,6 @@
struct platform_device *pdev;
int dma;
- /* Initialize tvp5150 gpios */
- mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT);
- mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT);
- gpio_set_value(TVP5150_RSTN, 1);
- gpio_set_value(TVP5150_PWDN, 0);
- ndelay(1);
-
gpio_set_value(TVP5150_PWDN, 1);
ndelay(1);
gpio_set_value(TVP5150_RSTN, 0);
@@ -294,14 +308,14 @@
{
int ret;
- ret = request_irq(SDHC1_IRQ, detect_irq, IRQF_TRIGGER_FALLING,
- "mmc-detect", data);
+ ret = request_irq(gpio_to_irq(SDHC1_IRQ_GPIO), detect_irq,
+ IRQF_TRIGGER_FALLING, "mmc-detect", data);
return ret;
}
static void visstrim_m10_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(SDHC1_IRQ, data);
+ free_irq(gpio_to_irq(SDHC1_IRQ_GPIO), data);
}
static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = {
@@ -377,10 +391,6 @@
/* USB OTG */
static int otg_phy_init(struct platform_device *pdev)
{
- gpio_set_value(OTG_PHY_CS_GPIO, 0);
-
- mdelay(10);
-
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
@@ -435,6 +445,11 @@
if (ret)
pr_err("Failed to setup pins (%d)\n", ret);
+ ret = gpio_request_array(visstrim_m10_gpios,
+ ARRAY_SIZE(visstrim_m10_gpios));
+ if (ret)
+ pr_err("Failed to request gpios (%d)\n", ret);
+
imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index c9d350c..7381387 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -57,7 +57,7 @@
imx27_add_imx_uart0(NULL);
imx27_add_fec(NULL);
- imx27_add_imx2_wdt(NULL);
+ imx27_add_imx2_wdt();
}
static void __init mx27ipcam_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index b47e98b..5ec0608 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -12,11 +12,12 @@
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/cpuidle.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
-#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@@ -24,6 +25,8 @@
#include <linux/pinctrl/machine.h>
#include <linux/phy.h>
#include <linux/micrel_phy.h>
+#include <linux/mfd/anatop.h>
+#include <asm/cpuidle.h>
#include <asm/smp_twd.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
@@ -31,8 +34,10 @@
#include <asm/mach/time.h>
#include <asm/system_misc.h>
#include <mach/common.h>
+#include <mach/cpuidle.h>
#include <mach/hardware.h>
+
void imx6q_restart(char mode, const char *cmd)
{
struct device_node *np;
@@ -113,6 +118,45 @@
imx6q_sabrelite_cko1_setup();
}
+static void __init imx6q_usb_init(void)
+{
+ struct device_node *np;
+ struct platform_device *pdev = NULL;
+ struct anatop *adata = NULL;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
+ if (np)
+ pdev = of_find_device_by_node(np);
+ if (pdev)
+ adata = platform_get_drvdata(pdev);
+ if (!adata) {
+ if (np)
+ of_node_put(np);
+ return;
+ }
+
+#define HW_ANADIG_USB1_CHRG_DETECT 0x000001b0
+#define HW_ANADIG_USB2_CHRG_DETECT 0x00000210
+
+#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x00100000
+#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x00080000
+
+ /*
+ * The external charger detector needs to be disabled,
+ * or the signal at DP will be poor
+ */
+ anatop_write_reg(adata, HW_ANADIG_USB1_CHRG_DETECT,
+ BM_ANADIG_USB_CHRG_DETECT_EN_B
+ | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B,
+ ~0);
+ anatop_write_reg(adata, HW_ANADIG_USB2_CHRG_DETECT,
+ BM_ANADIG_USB_CHRG_DETECT_EN_B |
+ BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B,
+ ~0);
+
+ of_node_put(np);
+}
+
static void __init imx6q_init_machine(void)
{
/*
@@ -127,6 +171,20 @@
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
imx6q_pm_init();
+ imx6q_usb_init();
+}
+
+static struct cpuidle_driver imx6q_cpuidle_driver = {
+ .name = "imx6q_cpuidle",
+ .owner = THIS_MODULE,
+ .en_core_tk_irqen = 1,
+ .states[0] = ARM_CPUIDLE_WFI_STATE,
+ .state_count = 1,
+};
+
+static void __init imx6q_init_late(void)
+{
+ imx_cpuidle_init(&imx6q_cpuidle_driver);
}
static void __init imx6q_map_io(void)
@@ -136,21 +194,8 @@
imx6q_clock_map_io();
}
-static int __init imx6q_gpio_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
-
- gpio_irq_base -= 32;
- irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
- NULL);
-
- return 0;
-}
-
static const struct of_device_id imx6q_irq_match[] __initconst = {
{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
- { .compatible = "fsl,imx6q-gpio", .data = imx6q_gpio_add_irq_domain, },
{ /* sentinel */ }
};
@@ -186,6 +231,7 @@
.handle_irq = imx6q_handle_irq,
.timer = &imx6q_timer,
.init_machine = imx6q_init_machine,
+ .init_late = imx6q_init_late,
.dt_compat = imx6q_dt_compat,
.restart = imx6q_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 15a26e9..5d08533 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -73,7 +73,7 @@
{
.membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
.mapbase = KZM_ARM11_16550,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+ /* irq number is run-time assigned */
.irqflags = IRQ_TYPE_EDGE_RISING,
.uartclk = 14745600,
.regshift = 0,
@@ -91,8 +91,7 @@
.flags = IORESOURCE_MEM,
},
{
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
@@ -125,6 +124,13 @@
tmp |= 0x2;
__raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
+ serial_platform_data[0].irq =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+ serial8250_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+ serial8250_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
return platform_device_register(&serial_device);
}
#else
@@ -152,8 +158,7 @@
.flags = IORESOURCE_MEM,
},
{
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
@@ -184,6 +189,11 @@
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+ kzm_smsc9118_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
+ kzm_smsc9118_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
+
return platform_device_register(&kzm_smsc9118_device);
}
#else
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 7274e79..667f359 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -26,7 +26,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx1.h>
-#include <mach/irqs.h>
#include "devices-imx1.h"
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index d14bbe9..ed22e3f 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -32,13 +32,13 @@
* Memory-mapped I/O on MX21ADS base board
*/
#define MX21ADS_MMIO_BASE_ADDR 0xf5000000
-#define MX21ADS_MMIO_SIZE SZ_16M
+#define MX21ADS_MMIO_SIZE 0xc00000
#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
(MX21ADS_MMIO_BASE_ADDR + (offset))
#define MX21ADS_CS8900A_MMIO_SIZE 0x200000
-#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11)
#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000)
#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000)
@@ -159,9 +159,10 @@
.resource = &mx21ads_flash_resource,
};
-static const struct resource mx21ads_cs8900_resources[] __initconst = {
+static struct resource mx21ads_cs8900_resources[] __initdata = {
DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE),
- DEFINE_RES_IRQ(MX21ADS_CS8900A_IRQ),
+ /* irq number is run-time assigned */
+ DEFINE_RES_IRQ(-1),
};
static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = {
@@ -241,13 +242,13 @@
static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
- return request_irq(IRQ_GPIOD(25), detect_irq,
+ return request_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), detect_irq,
IRQF_TRIGGER_FALLING, "mmc-detect", data);
}
static void mx21ads_sdhc_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOD(25), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), data);
}
static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = {
@@ -304,6 +305,11 @@
imx21_add_mxc_nand(&mx21ads_nand_board_info);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+ mx21ads_cs8900_resources[1].start =
+ gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
+ mx21ads_cs8900_resources[1].end =
+ gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
platform_device_register_full(&mx21ads_cs8900_devinfo);
}
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index f267342..ce247fd 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -237,9 +237,9 @@
imx25_add_fsl_usb2_udc(&otg_device_pdata);
imx25_add_mxc_ehci_hs(&usbh2_pdata);
imx25_add_mxc_nand(&mx25pdk_nand_board_info);
- imx25_add_imxdi_rtc(NULL);
+ imx25_add_imxdi_rtc();
imx25_add_imx_fb(&mx25pdk_fb_pdata);
- imx25_add_imx2_wdt(NULL);
+ imx25_add_imx2_wdt();
mx25pdk_fec_reset();
imx25_add_fec(&mx25_fec_pdata);
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index c6d385c..58c24c1 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -40,7 +40,6 @@
#include <mach/common.h>
#include <mach/iomux-mx27.h>
#include <mach/ulpi.h>
-#include <mach/irqs.h>
#include <mach/3ds_debugboard.h>
#include "devices-imx27.h"
@@ -48,7 +47,6 @@
#define SD1_EN_GPIO IMX_GPIO_NR(2, 25)
#define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23)
#define SPI2_SS0 IMX_GPIO_NR(4, 21)
-#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28))
#define PMIC_INT IMX_GPIO_NR(3, 14)
#define SPI1_SS0 IMX_GPIO_NR(4, 28)
#define SD1_CD IMX_GPIO_NR(2, 26)
@@ -241,18 +239,18 @@
.phy_mode = FSL_USB2_PHY_ULPI,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init mx27_3ds_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", mx27_3ds_otg_mode);
@@ -445,7 +443,7 @@
.bus_num = 1,
.chip_select = 0, /* SS0 */
.platform_data = &mc13783_pdata,
- .irq = IMX_GPIO_TO_IRQ(PMIC_INT),
+ /* irq number is run-time assigned */
.mode = SPI_CS_HIGH,
}, {
.modalias = "l4f00242t03",
@@ -480,7 +478,7 @@
imx27_add_fec(NULL);
imx27_add_imx_keypad(&mx27_3ds_keymap_data);
imx27_add_mxc_mmc(0, &sdhc1_pdata);
- imx27_add_imx2_wdt(NULL);
+ imx27_add_imx2_wdt();
otg_phy_init();
if (otg_mode_host) {
@@ -496,10 +494,11 @@
imx27_add_spi_imx1(&spi2_pdata);
imx27_add_spi_imx0(&spi1_pdata);
+ mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT);
spi_register_board_info(mx27_3ds_spi_devs,
ARRAY_SIZE(mx27_3ds_spi_devs));
- if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28)))
pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 0228d2e..7dc59ba 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -246,25 +246,25 @@
static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
- return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
- "sdhc1-card-detect", data);
+ return request_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), detect_irq,
+ IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
}
static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
- return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
- "sdhc2-card-detect", data);
+ return request_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), detect_irq,
+ IRQF_TRIGGER_RISING, "sdhc2-card-detect", data);
}
static void mx27ads_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOE(21), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), data);
}
static void mx27ads_sdhc2_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOB(7), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), data);
}
static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
@@ -310,7 +310,7 @@
imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
- imx27_add_mxc_w1(NULL);
+ imx27_add_mxc_w1();
}
static void __init mx27ads_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 4eafdf2..8915f93 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -44,9 +44,6 @@
#include "devices-imx31.h"
-/* CPLD IRQ line for external uart, external ethernet etc */
-#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
-
static int mx31_3ds_pins[] = {
/* UART1 */
MX31_PIN_CTS1__CTS1,
@@ -277,10 +274,6 @@
},
};
-static struct ipu_platform_data mx3_ipu_data = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "Epson-VGA",
.mode = fb_modedb,
@@ -317,7 +310,7 @@
return ret;
}
- ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)),
detect_irq, IRQF_DISABLED |
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"sdhc1-detect", data);
@@ -336,7 +329,7 @@
static void mx31_3ds_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), data);
+ free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), data);
gpio_free_array(mx31_3ds_sdhc1_gpios,
ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
}
@@ -539,7 +532,7 @@
.bus_num = 1,
.chip_select = 1, /* SS2 */
.platform_data = &mc13783_pdata,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ /* irq number is run-time assigned */
.mode = SPI_CS_HIGH,
}, {
.modalias = "l4f00242t03",
@@ -671,18 +664,18 @@
.phy_mode = FSL_USB2_PHY_ULPI,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init mx31_3ds_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", mx31_3ds_otg_mode);
@@ -714,6 +707,7 @@
imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
imx31_add_spi_imx1(&spi1_pdata);
+ mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(mx31_3ds_spi_devs,
ARRAY_SIZE(mx31_3ds_spi_devs));
@@ -736,15 +730,15 @@
if (!otg_mode_host)
imx31_add_fsl_usb2_udc(&usbotg_pdata);
- if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)))
printk(KERN_WARNING "Init of the debug board failed, all "
"devices on the debug board are unusable.\n");
- imx31_add_imx2_wdt(NULL);
+ imx31_add_imx2_wdt();
imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
imx31_add_mxc_mmc(0, &sdhc1_pdata);
imx31_add_spi_imx0(&spi0_pdata);
- imx31_add_ipu_core(&mx3_ipu_data);
+ imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
/* CSI */
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 4518e54..d37f480 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -21,6 +21,7 @@
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -62,20 +63,18 @@
#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS)
#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS)
#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
-#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
-#define MXC_EXP_IO_BASE MXC_BOARD_IRQ_START
-#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11)
+#define EXPIO_INT_XUART_INTA 10
+#define EXPIO_INT_XUART_INTB 11
#define MXC_MAX_EXP_IO_LINES 16
/* CS8900 */
-#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8)
+#define EXPIO_INT_ENET_INT 8
#define CS4_CS8900_MMIO_START 0x20000
+static struct irq_domain *domain;
+
/*
* The serial port definition structure.
*/
@@ -83,7 +82,6 @@
{
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
.mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
- .irq = EXPIO_INT_XUART_INTA,
.uartclk = 14745600,
.regshift = 0,
.iotype = UPIO_MEM,
@@ -91,7 +89,6 @@
}, {
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
.mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
- .irq = EXPIO_INT_XUART_INTB,
.uartclk = 14745600,
.regshift = 0,
.iotype = UPIO_MEM,
@@ -108,9 +105,9 @@
},
};
-static const struct resource mx31ads_cs8900_resources[] __initconst = {
+static struct resource mx31ads_cs8900_resources[] __initdata = {
DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K),
- DEFINE_RES_IRQ(EXPIO_INT_ENET_INT),
+ DEFINE_RES_IRQ(-1),
};
static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = {
@@ -122,11 +119,19 @@
static int __init mxc_init_extuart(void)
{
+ serial_platform_data[0].irq = irq_find_mapping(domain,
+ EXPIO_INT_XUART_INTA);
+ serial_platform_data[1].irq = irq_find_mapping(domain,
+ EXPIO_INT_XUART_INTB);
return platform_device_register(&serial_device);
}
static void __init mxc_init_ext_ethernet(void)
{
+ mx31ads_cs8900_resources[1].start =
+ irq_find_mapping(domain, EXPIO_INT_ENET_INT);
+ mx31ads_cs8900_resources[1].end =
+ irq_find_mapping(domain, EXPIO_INT_ENET_INT);
platform_device_register_full(
(struct platform_device_info *)&mx31ads_cs8900_devinfo);
}
@@ -157,12 +162,12 @@
imr_val = __raw_readw(PBC_INTMASK_SET_REG);
int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
- expio_irq = MXC_EXP_IO_BASE;
+ expio_irq = 0;
for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
if ((int_valid & 1) == 0)
continue;
- generic_handle_irq(expio_irq);
+ generic_handle_irq(irq_find_mapping(domain, expio_irq));
}
}
@@ -172,7 +177,7 @@
*/
static void expio_mask_irq(struct irq_data *d)
{
- u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+ u32 expio = d->hwirq;
/* mask the interrupt */
__raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
__raw_readw(PBC_INTMASK_CLEAR_REG);
@@ -184,7 +189,7 @@
*/
static void expio_ack_irq(struct irq_data *d)
{
- u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+ u32 expio = d->hwirq;
/* clear the interrupt status */
__raw_writew(1 << expio, PBC_INTSTATUS_REG);
}
@@ -195,7 +200,7 @@
*/
static void expio_unmask_irq(struct irq_data *d)
{
- u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+ u32 expio = d->hwirq;
/* unmask the interrupt */
__raw_writew(1 << expio, PBC_INTMASK_SET_REG);
}
@@ -209,7 +214,8 @@
static void __init mx31ads_init_expio(void)
{
- int i;
+ int irq_base;
+ int i, irq;
printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
@@ -221,13 +227,21 @@
/* disable the interrupt and clear the status */
__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
__raw_writew(0xFFFF, PBC_INTSTATUS_REG);
- for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
- i++) {
+
+ irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
+ WARN_ON(irq_base < 0);
+
+ domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+ WARN_ON(!domain);
+
+ for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
- irq_set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH);
- irq_set_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
+ irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_4));
+ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+ irq_set_chained_handler(irq, mx31ads_expio_irq_handler);
}
#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
@@ -479,7 +493,6 @@
static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
.init = mx31_wm8350_init,
- .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
};
#endif
@@ -488,13 +501,17 @@
{
I2C_BOARD_INFO("wm8350", 0x1a),
.platform_data = &mx31_wm8350_pdata,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ /* irq number is run-time assigned */
},
#endif
};
static void __init mxc_init_i2c(void)
{
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+ mx31ads_i2c1_devices[0].irq =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+#endif
i2c_register_board_info(1, mx31ads_i2c1_devices,
ARRAY_SIZE(mx31ads_i2c1_devices));
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 83714b0..34b9bf0 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -65,8 +65,7 @@
.flags = IORESOURCE_MEM,
},
{
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
@@ -233,7 +232,7 @@
.bus_num = 1,
.chip_select = 0,
.platform_data = &mc13783_pdata,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ /* irq number is run-time assigned */
};
static struct platform_device *devices[] __initdata = {
@@ -285,10 +284,15 @@
imx31_add_spi_imx0(&spi0_pdata);
imx31_add_spi_imx1(&spi1_pdata);
+ mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(&mc13783_dev, 1);
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+ smsc91x_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
+ smsc91x_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
platform_add_devices(devices, ARRAY_SIZE(devices));
/* USB */
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index 686c605..c8785b3 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -43,7 +43,6 @@
#include <mach/common.h>
#include <mach/board-mx31lite.h>
#include <mach/iomux-mx3.h>
-#include <mach/irqs.h>
#include <mach/ulpi.h>
#include "devices-imx31.h"
@@ -83,8 +82,7 @@
.end = MX31_CS4_BASE_ADDR + 0x100,
.flags = IORESOURCE_MEM,
}, {
- .start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
- .end = IOMUX_TO_IRQ(MX31_PIN_SFS6),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
@@ -124,7 +122,7 @@
.bus_num = 1,
.chip_select = 0,
.platform_data = &mc13783_pdata,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ /* irq number is run-time assigned */
};
/*
@@ -258,6 +256,7 @@
imx31_add_mxc_nand(&mx31lite_nand_board_info);
imx31_add_spi_imx1(&spi1_pdata);
+ mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(&mc13783_spi_dev, 1);
/* USB */
@@ -274,6 +273,10 @@
pr_warning("could not get LAN irq gpio\n");
else {
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+ smsc911x_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+ smsc911x_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6));
platform_device_register(&smsc911x_device);
}
}
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 016791f..d46290b 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -303,7 +303,7 @@
static struct spi_board_info moboard_spi_board_info[] __initdata = {
{
.modalias = "mc13783",
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ /* irq number is run-time assigned */
.max_speed_hz = 300000,
.bus_num = 1,
.chip_select = 0,
@@ -473,10 +473,6 @@
.leds = mx31moboard_leds,
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct platform_device *devices[] __initdata = {
&mx31moboard_flash,
};
@@ -494,7 +490,7 @@
int dma, ret = -ENOMEM;
struct platform_device *pdev;
- imx31_add_ipu_core(&mx3_ipu_data);
+ imx31_add_ipu_core();
pdev = imx31_alloc_mx3_camera(&camera_pdata);
if (IS_ERR(pdev))
@@ -544,7 +540,7 @@
platform_add_devices(devices, ARRAY_SIZE(devices));
gpio_led_register_device(-1, &mx31moboard_led_pdata);
- imx31_add_imx2_wdt(NULL);
+ imx31_add_imx2_wdt();
imx31_add_imx_uart0(&uart0_pdata);
imx31_add_imx_uart4(&uart4_pdata);
@@ -557,6 +553,8 @@
gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+ moboard_spi_board_info[0].irq =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(moboard_spi_board_info,
ARRAY_SIZE(moboard_spi_board_info));
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 28aa194..504983c 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -46,7 +46,6 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx35.h>
-#include <mach/irqs.h>
#include <mach/3ds_debugboard.h>
#include <video/platform_lcd.h>
@@ -80,10 +79,6 @@
},
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "Ceramate-CLAA070VC01",
.mode = fb_modedb,
@@ -136,8 +131,6 @@
.dev.platform_data = &mx35_3ds_lcd_data,
};
-#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 1))
-
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -297,10 +290,6 @@
return ret;
}
-static const struct ipu_platform_data mx35_3ds_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct i2c_board_info mx35_3ds_i2c_camera = {
I2C_BOARD_INFO("ov2640", 0x30),
};
@@ -492,7 +481,7 @@
I2C_BOARD_INFO("mc13892", 0x08),
.platform_data = &mx35_3ds_mc13892_data,
- .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
+ /* irq number is run-time assigned */
};
static void __init imx35_3ds_init_mc13892(void)
@@ -504,6 +493,7 @@
return;
}
+ mx35_3ds_i2c_mc13892.irq = gpio_to_irq(GPIO_PMIC_INT);
i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1);
}
@@ -540,18 +530,18 @@
.portsc = MXC_EHCI_MODE_SERIAL,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init mx35_3ds_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", mx35_3ds_otg_mode);
@@ -571,7 +561,8 @@
mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
imx35_add_fec(NULL);
- imx35_add_imx2_wdt(NULL);
+ imx35_add_imx2_wdt();
+ imx35_add_mxc_rtc();
platform_add_devices(devices, ARRAY_SIZE(devices));
imx35_add_imx_uart0(&uart_pdata);
@@ -587,7 +578,7 @@
imx35_add_mxc_nand(&mx35pdk_nand_board_info);
imx35_add_sdhci_esdhc_imx(0, NULL);
- if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
pr_warn("Init of the debugboard failed, all "
"devices on the debugboard are unusable.\n");
imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
@@ -595,7 +586,7 @@
i2c_register_board_info(
0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds));
- imx35_add_ipu_core(&mx35_3ds_ipu_data);
+ imx35_add_ipu_core();
platform_device_register(&mx35_3ds_ov2640);
imx35_3ds_init_camera();
diff --git a/arch/arm/mach-imx/mach-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c
index 3c5b163..9ee84a4 100644
--- a/arch/arm/mach-imx/mach-mx51_3ds.c
+++ b/arch/arm/mach-imx/mach-mx51_3ds.c
@@ -26,7 +26,6 @@
#include "devices-imx51.h"
-#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 6))
#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28)
static iomux_v3_cfg_t mx51_3ds_pads[] = {
@@ -148,13 +147,13 @@
spi_register_board_info(mx51_3ds_spi_nor_device,
ARRAY_SIZE(mx51_3ds_spi_nor_device));
- if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ if (mxc_expio_init(MX51_CS5_BASE_ADDR, IMX_GPIO_NR(1, 6)))
printk(KERN_WARNING "Init of the debugboard failed, all "
"devices on the board are unusable.\n");
imx51_add_sdhci_esdhc_imx(0, NULL);
imx51_add_imx_keypad(&mx51_3ds_map_data);
- imx51_add_imx2_wdt(0, NULL);
+ imx51_add_imx2_wdt(0);
}
static void __init mx51_3ds_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c
index dde3970..7b31cbd 100644
--- a/arch/arm/mach-imx/mach-mx51_babbage.c
+++ b/arch/arm/mach-imx/mach-mx51_babbage.c
@@ -307,18 +307,18 @@
.portsc = MXC_EHCI_MODE_ULPI,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init babbage_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", babbage_otg_mode);
@@ -411,7 +411,7 @@
spi_register_board_info(mx51_babbage_spi_board_info,
ARRAY_SIZE(mx51_babbage_spi_board_info));
imx51_add_ecspi(0, &mx51_babbage_spi_pdata);
- imx51_add_imx2_wdt(0, NULL);
+ imx51_add_imx2_wdt(0);
}
static void __init mx51_babbage_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c
index 0564198..6c28e65 100644
--- a/arch/arm/mach-imx/mach-mx53_ard.c
+++ b/arch/arm/mach-imx/mach-mx53_ard.c
@@ -135,8 +135,7 @@
.flags = IORESOURCE_MEM,
},
{
- .start = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
- .end = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
@@ -240,10 +239,12 @@
imx53_ard_common_init();
mx53_ard_io_init();
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+ ard_smsc911x_resources[1].start = gpio_to_irq(ARD_ETHERNET_INT_B);
+ ard_smsc911x_resources[1].end = gpio_to_irq(ARD_ETHERNET_INT_B);
platform_add_devices(devices, ARRAY_SIZE(devices));
imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
- imx53_add_imx2_wdt(0, NULL);
+ imx53_add_imx2_wdt(0);
imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
imx_add_gpio_keys(&ard_button_data);
@@ -266,5 +267,6 @@
.handle_irq = imx53_handle_irq,
.timer = &mx53_ard_timer,
.init_machine = mx53_ard_board_init,
+ .init_late = imx53_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c
index 5a72188..09fe219 100644
--- a/arch/arm/mach-imx/mach-mx53_evk.c
+++ b/arch/arm/mach-imx/mach-mx53_evk.c
@@ -154,7 +154,7 @@
spi_register_board_info(mx53_evk_spi_board_info,
ARRAY_SIZE(mx53_evk_spi_board_info));
imx53_add_ecspi(0, &mx53_evk_spi_data);
- imx53_add_imx2_wdt(0, NULL);
+ imx53_add_imx2_wdt(0);
gpio_led_register_device(-1, &mx53evk_leds_data);
}
@@ -174,5 +174,6 @@
.handle_irq = imx53_handle_irq,
.timer = &mx53_evk_timer,
.init_machine = mx53_evk_board_init,
+ .init_late = imx53_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c
index 37f67ca..8abe23c 100644
--- a/arch/arm/mach-imx/mach-mx53_loco.c
+++ b/arch/arm/mach-imx/mach-mx53_loco.c
@@ -283,7 +283,7 @@
imx53_add_imx_uart(0, NULL);
mx53_loco_fec_reset();
imx53_add_fec(&mx53_loco_fec_data);
- imx53_add_imx2_wdt(0, NULL);
+ imx53_add_imx2_wdt(0);
ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
if (ret)
@@ -316,5 +316,6 @@
.handle_irq = imx53_handle_irq,
.timer = &mx53_loco_timer,
.init_machine = mx53_loco_board_init,
+ .init_late = imx53_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c
index 8e972c5..b15d6a6d 100644
--- a/arch/arm/mach-imx/mach-mx53_smd.c
+++ b/arch/arm/mach-imx/mach-mx53_smd.c
@@ -138,7 +138,7 @@
mx53_smd_init_uart();
mx53_smd_fec_reset();
imx53_add_fec(&mx53_smd_fec_data);
- imx53_add_imx2_wdt(0, NULL);
+ imx53_add_imx2_wdt(0);
imx53_add_imx_i2c(0, &mx53_smd_i2c_data);
imx53_add_sdhci_esdhc_imx(0, NULL);
imx53_add_sdhci_esdhc_imx(1, NULL);
@@ -163,5 +163,6 @@
.handle_irq = imx53_handle_irq,
.timer = &mx53_smd_timer,
.init_machine = mx53_smd_board_init,
+ .init_late = imx53_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 8b3d3f0..0bf6d30 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -213,13 +213,13 @@
static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
- return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING,
- "sdhc1-card-detect", data);
+ return request_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), detect_irq,
+ IRQF_TRIGGER_FALLING, "sdhc1-card-detect", data);
}
static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOF(8), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), data);
}
static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 541152e..de8516b 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -36,7 +36,6 @@
#include <mach/hardware.h>
#include <mach/iomux-mx27.h>
#include <asm/mach/time.h>
-#include <mach/irqs.h>
#include <mach/ulpi.h>
#include "devices-imx27.h"
@@ -245,7 +244,7 @@
{
int ret;
- ret = request_irq(IRQ_GPIOC(29), detect_irq,
+ ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"imx-mmc-detect", data);
if (ret)
@@ -257,7 +256,7 @@
static void pca100_sdhc2_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOC(29), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
}
static const struct imxmmc_platform_data sdhc_pdata __initconst = {
@@ -298,18 +297,18 @@
.phy_mode = FSL_USB2_PHY_ULPI,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init pca100_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", pca100_otg_mode);
@@ -408,8 +407,8 @@
imx27_add_imx_fb(&pca100_fb_data);
imx27_add_fec(NULL);
- imx27_add_imx2_wdt(NULL);
- imx27_add_mxc_w1(NULL);
+ imx27_add_imx2_wdt();
+ imx27_add_mxc_w1();
}
static void __init pca100_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 0a40004..e3c4513 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -225,8 +225,7 @@
.end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
@@ -371,7 +370,7 @@
gpio_direction_input(SDHC1_GPIO_WP);
#endif
- ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
+ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"sdhc-detect", data);
if (ret)
@@ -391,7 +390,7 @@
static void pcm970_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
+ free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), data);
gpio_free(SDHC1_GPIO_DET);
gpio_free(SDHC1_GPIO_WP);
}
@@ -442,10 +441,6 @@
&pcm037_mt9v022,
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static const struct fb_videomode fb_modedb[] = {
{
/* 240x320 @ 60 Hz Sharp */
@@ -511,8 +506,7 @@
.end = MX31_CS5_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
- .end = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@@ -557,18 +551,18 @@
.phy_mode = FSL_USB2_PHY_ULPI,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init pcm037_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", pcm037_otg_mode);
@@ -619,13 +613,13 @@
platform_add_devices(devices, ARRAY_SIZE(devices));
- imx31_add_imx2_wdt(NULL);
+ imx31_add_imx2_wdt();
imx31_add_imx_uart0(&uart_pdata);
/* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */
imx31_add_imx_uart1(&uart_pdata);
imx31_add_imx_uart2(&uart_pdata);
- imx31_add_mxc_w1(NULL);
+ imx31_add_mxc_w1();
/* LAN9217 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
@@ -633,6 +627,10 @@
pr_warning("could not get LAN irq gpio\n");
else {
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+ smsc911x_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+ smsc911x_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
platform_device_register(&pcm037_eth);
}
@@ -646,7 +644,7 @@
imx31_add_mxc_nand(&pcm037_nand_board_info);
imx31_add_mxc_mmc(0, &sdhc_pdata);
- imx31_add_ipu_core(&mx3_ipu_data);
+ imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
/* CSI */
@@ -659,6 +657,10 @@
pcm037_init_camera();
+ pcm970_sja1000_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
+ pcm970_sja1000_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
platform_device_register(&pcm970_sja1000);
if (otg_mode_host) {
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 2f3debe..95f49d9 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -27,6 +27,7 @@
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -274,7 +275,7 @@
static struct spi_board_info pcm038_spi_board_info[] __initdata = {
{
.modalias = "mc13783",
- .irq = IRQ_GPIOB(23),
+ /* irq number is run-time assigned */
.max_speed_hz = 300000,
.bus_num = 0,
.chip_select = 0,
@@ -325,6 +326,7 @@
mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
imx27_add_spi_imx0(&pcm038_spi0_data);
+ pcm038_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(2, 23));
spi_register_board_info(pcm038_spi_board_info,
ARRAY_SIZE(pcm038_spi_board_info));
@@ -332,8 +334,8 @@
imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
- imx27_add_imx2_wdt(NULL);
- imx27_add_mxc_w1(NULL);
+ imx27_add_imx2_wdt();
+ imx27_add_mxc_w1();
#ifdef CONFIG_MACH_PCM970_BASEBOARD
pcm970_baseboard_init();
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 73585f5..e4bd438 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -76,10 +76,6 @@
},
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "Sharp-LQ035Q7",
.mode = fb_modedb,
@@ -330,18 +326,18 @@
.phy_mode = FSL_USB2_PHY_UTMI,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init pcm043_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", pcm043_otg_mode);
@@ -363,7 +359,7 @@
imx35_add_fec(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
- imx35_add_imx2_wdt(NULL);
+ imx35_add_imx2_wdt();
imx35_add_imx_uart0(&uart_pdata);
imx35_add_mxc_nand(&pcm037_nand_board_info);
@@ -376,7 +372,7 @@
imx35_add_imx_i2c0(&pcm043_i2c0_data);
- imx35_add_ipu_core(&mx3_ipu_data);
+ imx35_add_ipu_core();
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
if (otg_mode_host) {
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 2606210..fb25fbd 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -22,7 +22,6 @@
#include <linux/gpio.h>
#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -51,8 +50,6 @@
(QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
#define QONG_DNET_SIZE 0x00001000
-#define QONG_FPGA_IRQ IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
-
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -78,8 +75,7 @@
.end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = QONG_FPGA_IRQ,
- .end = QONG_FPGA_IRQ,
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
@@ -95,6 +91,10 @@
{
int ret;
+ dnet_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1));
+ dnet_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1));
ret = platform_device_register(&dnet_device);
return ret;
}
@@ -252,7 +252,7 @@
mxc_init_imx_uart();
qong_init_nor_mtd();
qong_init_fpga();
- imx31_add_imx2_wdt(NULL);
+ imx31_add_imx2_wdt();
}
static void __init qong_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index cb9ceae..67ff38e 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -14,6 +14,7 @@
#include <linux/mtd/physmap.h>
#include <linux/interrupt.h>
#include <linux/dm9000.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -21,7 +22,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <mach/iomux-mx1.h>
#include "devices-imx1.h"
@@ -78,8 +78,7 @@
.end = MX1_CS5_PHYS + 5,
.flags = IORESOURCE_MEM, /* data access */
}, {
- .start = IRQ_GPIOC(3),
- .end = IRQ_GPIOC(3),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
@@ -123,6 +122,8 @@
imx1_add_imx_uart0(&uart_pdata);
printk(KERN_INFO"Scb9328: Adding devices\n");
+ dm9000x_resources[2].start = gpio_to_irq(IMX_GPIO_NR(3, 3));
+ dm9000x_resources[2].end = gpio_to_irq(IMX_GPIO_NR(3, 3));
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index add8c69..39eb796 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -31,7 +31,6 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx35.h>
-#include <mach/irqs.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
@@ -87,10 +86,6 @@
}
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "PT0708048",
.mode = fb_modedb,
@@ -162,7 +157,7 @@
}, {
I2C_BOARD_INFO("mc13892", 0x08),
.platform_data = &vpr200_pmic,
- .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
+ /* irq number is run-time assigned */
}
};
@@ -272,7 +267,7 @@
mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
imx35_add_fec(NULL);
- imx35_add_imx2_wdt(NULL);
+ imx35_add_imx2_wdt();
imx_add_gpio_keys(&vpr200_gpio_keys_data);
platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -290,7 +285,7 @@
imx35_add_imx_uart0(NULL);
imx35_add_imx_uart2(NULL);
- imx35_add_ipu_core(&mx3_ipu_data);
+ imx35_add_ipu_core();
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
imx35_add_fsl_usb2_udc(&otg_device_pdata);
@@ -299,6 +294,7 @@
imx35_add_mxc_nand(&vpr200_nand_board_info);
imx35_add_sdhci_esdhc_imx(0, NULL);
+ vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
i2c_register_board_info(0, vpr200_i2c_devices,
ARRAY_SIZE(vpr200_i2c_devices));
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
index fcafd3d..6d60d51 100644
--- a/arch/arm/mach-imx/mm-imx1.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -24,7 +24,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <mach/iomux-v1.h>
static struct map_desc imx_io_desc[] __initdata = {
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 5f43905..d056dad 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -26,7 +26,6 @@
#include <mach/devices-common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <mach/irqs.h>
#include <mach/iomux-v1.h>
/* MX21 memory map definition */
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
index 6ff3714..388928f 100644
--- a/arch/arm/mach-imx/mm-imx25.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -29,7 +29,6 @@
#include <mach/hardware.h>
#include <mach/mx25.h>
#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
/*
* This table defines static virtual address mappings for I/O regions.
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index 2566255..e7e24af 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -26,7 +26,6 @@
#include <mach/devices-common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <mach/irqs.h>
#include <mach/iomux-v1.h>
/* MX27 memory map definition */
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 967ed5b..fe96105 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -30,7 +30,6 @@
#include <mach/devices-common.h>
#include <mach/hardware.h>
#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
#include "crmregs-imx3.h"
@@ -86,6 +85,7 @@
void __init imx3_init_l2x0(void)
{
+#ifdef CONFIG_CACHE_L2X0
void __iomem *l2x0_base;
void __iomem *clkctl_base;
@@ -115,6 +115,7 @@
}
l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+#endif
}
#ifdef CONFIG_SOC_IMX31
@@ -179,6 +180,8 @@
mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
+ pinctrl_provide_dummies();
+
if (to_version == 1) {
strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
strlen(imx31_sdma_pdata.fw_name));
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index feeee17..f19d604 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -16,7 +16,6 @@
#include <linux/clk.h>
#include <linux/pinctrl/machine.h>
-#include <asm/system_misc.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
@@ -24,24 +23,6 @@
#include <mach/devices-common.h>
#include <mach/iomux-v3.h>
-static struct clk *gpc_dvfs_clk;
-
-static void imx5_idle(void)
-{
- /* gpc clock is needed for SRPG */
- if (gpc_dvfs_clk == NULL) {
- gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
- if (IS_ERR(gpc_dvfs_clk))
- return;
- clk_prepare(gpc_dvfs_clk);
- }
- clk_enable(gpc_dvfs_clk);
- mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
- if (!tzic_enable_wake())
- cpu_do_idle();
- clk_disable(gpc_dvfs_clk);
-}
-
/*
* Define the MX50 memory map.
*/
@@ -105,7 +86,6 @@
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
- arm_pm_idle = imx5_idle;
}
void __init imx53_init_early(void)
@@ -202,6 +182,8 @@
mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
+ pinctrl_provide_dummies();
+
/* i.mx51 has the i.mx35 type sdma */
imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
@@ -241,4 +223,10 @@
void __init imx51_init_late(void)
{
mx51_neon_fixup();
+ imx51_pm_init();
+}
+
+void __init imx53_init_late(void)
+{
+ imx53_pm_init();
}
diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c
index 7d26f76..29e890f 100644
--- a/arch/arm/mach-imx/mx31lilly-db.c
+++ b/arch/arm/mach-imx/mx31lilly-db.c
@@ -130,7 +130,8 @@
gpio_direction_input(gpio_det);
gpio_direction_input(gpio_wp);
- ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq,
+ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)),
+ detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC detect", data);
if (ret)
@@ -151,7 +152,7 @@
{
gpio_free(gpio_det);
gpio_free(gpio_wp);
- free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+ free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)), data);
}
static const struct imxmmc_platform_data mmc_pdata __initconst = {
@@ -161,10 +162,6 @@
};
/* Framebuffer support */
-static const struct ipu_platform_data ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static const struct fb_videomode fb_modedb = {
/* 640x480 TFT panel (IPS-056T) */
.name = "CRT-VGA",
@@ -198,7 +195,7 @@
return;
}
- imx31_add_ipu_core(&ipu_data);
+ imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&fb_pdata);
gpio_direction_output(LCD_VCC_EN_GPIO, 1);
}
diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c
index bf0fb87..83d17d9 100644
--- a/arch/arm/mach-imx/mx31lite-db.c
+++ b/arch/arm/mach-imx/mx31lite-db.c
@@ -116,7 +116,8 @@
gpio_direction_input(gpio_det);
gpio_direction_input(gpio_wp);
- ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
+ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)),
+ detect_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC detect", data);
if (ret)
@@ -137,7 +138,7 @@
{
gpio_free(gpio_det);
gpio_free(gpio_wp);
- free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data);
+ free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)), data);
}
static const struct imxmmc_platform_data mmc_pdata __initconst = {
@@ -191,6 +192,6 @@
imx31_add_mxc_mmc(0, &mmc_pdata);
imx31_add_spi_imx0(&spi0_pdata);
gpio_led_register_device(-1, &litekit_led_platform_data);
- imx31_add_imx2_wdt(NULL);
- imx31_add_mxc_rtc(NULL);
+ imx31_add_imx2_wdt();
+ imx31_add_mxc_rtc();
}
diff --git a/arch/arm/mach-imx/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c
index ec6ca91..ee870c4 100644
--- a/arch/arm/mach-imx/mx51_efika.c
+++ b/arch/arm/mach-imx/mx51_efika.c
@@ -587,7 +587,7 @@
.bus_num = 0,
.chip_select = 0,
.platform_data = &mx51_efika_mc13892_data,
- .irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC),
+ /* irq number is run-time assigned */
},
};
@@ -620,6 +620,7 @@
gpio_request(EFIKAMX_PMIC, "pmic irq");
gpio_direction_input(EFIKAMX_PMIC);
+ mx51_efika_spi_board_info[1].irq = gpio_to_irq(EFIKAMX_PMIC);
spi_register_board_info(mx51_efika_spi_board_info,
ARRAY_SIZE(mx51_efika_spi_board_info));
imx51_add_ecspi(0, &mx51_efika_spi_pdata);
diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
index 99afbc3..9917e2f 100644
--- a/arch/arm/mach-imx/pcm970-baseboard.c
+++ b/arch/arm/mach-imx/pcm970-baseboard.c
@@ -95,14 +95,14 @@
{
int ret;
- ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
- "imx-mmc-detect", data);
+ ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
+ IRQF_TRIGGER_FALLING, "imx-mmc-detect", data);
if (ret)
return ret;
ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
if (ret) {
- free_irq(IRQ_GPIOC(29), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
return ret;
}
@@ -113,7 +113,7 @@
static void pcm970_sdhc2_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOC(29), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
gpio_free(GPIO_PORTC + 28);
}
@@ -192,8 +192,7 @@
.end = MX27_CS4_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = IRQ_GPIOE(19),
- .end = IRQ_GPIOE(19),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@@ -227,5 +226,7 @@
imx27_add_imx_fb(&pcm038_fb_data);
mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
imx27_add_mxc_mmc(1, &sdhc_pdata);
+ pcm970_sja1000_resources[1].start = gpio_to_irq(IMX_GPIO_NR(5, 19));
+ pcm970_sja1000_resources[1].end = gpio_to_irq(IMX_GPIO_NR(5, 19));
platform_device_register(&pcm970_sja1000);
}
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index e26a9cb..19621ed1 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -12,19 +12,30 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <asm/cacheflush.h>
+#include <asm/system_misc.h>
#include <asm/tlbflush.h>
#include <mach/common.h>
+#include <mach/cpuidle.h>
#include <mach/hardware.h>
#include "crm-regs-imx5.h"
-static struct clk *gpc_dvfs_clk;
+/*
+ * The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit.
+ * This is also the lowest power state possible without affecting
+ * non-cpu parts of the system. For these reasons, imx5 should default
+ * to always using this state for cpu idling. The PM_SUSPEND_STANDBY also
+ * uses this state and needs to take no action when registers remain confgiured
+ * for this state.
+ */
+#define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF
/*
* set cpu low power mode before WFI instruction. This function is called
* mx5 because it can be used for mx50, mx51, and mx53.
*/
-void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
+static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
{
u32 plat_lpc, arm_srpgcr, ccm_clpcr;
u32 empgc0, empgc1;
@@ -87,11 +98,6 @@
}
}
-static int mx5_suspend_prepare(void)
-{
- return clk_prepare_enable(gpc_dvfs_clk);
-}
-
static int mx5_suspend_enter(suspend_state_t state)
{
switch (state) {
@@ -99,7 +105,7 @@
mx5_cpu_lp_set(STOP_POWER_OFF);
break;
case PM_SUSPEND_STANDBY:
- mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ /* DEFAULT_IDLE_STATE already configured */
break;
default:
return -EINVAL;
@@ -114,12 +120,10 @@
__raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
}
cpu_do_idle();
- return 0;
-}
-static void mx5_suspend_finish(void)
-{
- clk_disable_unprepare(gpc_dvfs_clk);
+ /* return registers to default idle state */
+ mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
+ return 0;
}
static int mx5_pm_valid(suspend_state_t state)
@@ -129,25 +133,80 @@
static const struct platform_suspend_ops mx5_suspend_ops = {
.valid = mx5_pm_valid,
- .prepare = mx5_suspend_prepare,
.enter = mx5_suspend_enter,
- .finish = mx5_suspend_finish,
};
-static int __init mx5_pm_init(void)
+static inline int imx5_cpu_do_idle(void)
{
- if (!cpu_is_mx51() && !cpu_is_mx53())
- return 0;
+ int ret = tzic_enable_wake();
- if (gpc_dvfs_clk == NULL)
- gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+ if (likely(!ret))
+ cpu_do_idle();
- if (!IS_ERR(gpc_dvfs_clk)) {
- if (cpu_is_mx51())
- suspend_set_ops(&mx5_suspend_ops);
- } else
- return -EPERM;
+ return ret;
+}
+static void imx5_pm_idle(void)
+{
+ imx5_cpu_do_idle();
+}
+
+static int imx5_cpuidle_enter(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int idx)
+{
+ int ret;
+
+ ret = imx5_cpu_do_idle();
+ if (ret < 0)
+ return ret;
+
+ return idx;
+}
+
+static struct cpuidle_driver imx5_cpuidle_driver = {
+ .name = "imx5_cpuidle",
+ .owner = THIS_MODULE,
+ .en_core_tk_irqen = 1,
+ .states[0] = {
+ .enter = imx5_cpuidle_enter,
+ .exit_latency = 2,
+ .target_residency = 1,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .name = "IMX5 SRPG",
+ .desc = "CPU state retained,powered off",
+ },
+ .state_count = 1,
+};
+
+static int __init imx5_pm_common_init(void)
+{
+ int ret;
+ struct clk *gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+
+ if (IS_ERR(gpc_dvfs_clk))
+ return PTR_ERR(gpc_dvfs_clk);
+
+ ret = clk_prepare_enable(gpc_dvfs_clk);
+ if (ret)
+ return ret;
+
+ arm_pm_idle = imx5_pm_idle;
+
+ /* Set the registers to the default cpu idle state. */
+ mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
+
+ imx_cpuidle_init(&imx5_cpuidle_driver);
return 0;
}
-device_initcall(mx5_pm_init);
+
+void __init imx51_pm_init(void)
+{
+ int ret = imx5_pm_common_init();
+ if (!ret)
+ suspend_set_ops(&mx5_suspend_ops);
+}
+
+void __init imx53_pm_init(void)
+{
+ imx5_pm_common_init();
+}
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index 2222c57..b0d3cc4 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -20,9 +20,6 @@
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/leds.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 25fb3fd..f261cd2 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -159,6 +159,7 @@
gate_fn->gate.flags = clk_gate_flags;
gate_fn->gate.lock = lock;
gate_fn->gate.hw.init = &init;
+ gate_fn->fn = fn;
/* ops is the gate ops, but with our disable function */
if (clk_gate_fn_ops.disable != clk_gate_fn_disable) {
@@ -193,9 +194,11 @@
bit_idx, 0, &gating_lock, fn);
}
+static struct clk *ge0, *ge1;
+
void __init kirkwood_clk_init(void)
{
- struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio;
+ struct clk *runit, *sata0, *sata1, *usb0, *sdio;
struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio;
tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
@@ -257,6 +260,9 @@
orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
IRQ_KIRKWOOD_GE00_ERR);
+ /* The interface forgets the MAC address assigned by u-boot if
+ the clock is turned off, so claim the clk now. */
+ clk_prepare_enable(ge0);
}
@@ -268,6 +274,7 @@
orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
IRQ_KIRKWOOD_GE01_ERR);
+ clk_prepare_enable(ge1);
}
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 3eee37a..a115142 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -38,6 +38,7 @@
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
#define L2_WRITETHROUGH 0x00000010
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index fede3d5..c5b6851 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -80,6 +80,7 @@
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000)
#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000)
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
deleted file mode 100644
index e0b3eee..0000000
--- a/arch/arm/mach-lpc32xx/Kconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-if ARCH_LPC32XX
-
-menu "Individual UART enable selections"
-
-config ARCH_LPC32XX_UART3_SELECT
- bool "Add support for standard UART3"
- help
- Adds support for standard UART 3 when the 8250 serial support
- is enabled.
-
-config ARCH_LPC32XX_UART4_SELECT
- bool "Add support for standard UART4"
- help
- Adds support for standard UART 4 when the 8250 serial support
- is enabled.
-
-config ARCH_LPC32XX_UART5_SELECT
- bool "Add support for standard UART5"
- default y
- help
- Adds support for standard UART 5 when the 8250 serial support
- is enabled.
-
-config ARCH_LPC32XX_UART6_SELECT
- bool "Add support for standard UART6"
- help
- Adds support for standard UART 6 when the 8250 serial support
- is enabled.
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot
index 2cfe0ee..697323b 100644
--- a/arch/arm/mach-lpc32xx/Makefile.boot
+++ b/arch/arm/mach-lpc32xx/Makefile.boot
@@ -2,3 +2,4 @@
params_phys-y := 0x80000100
initrd_phys-y := 0x82000000
+dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
index f6a3ffe..f48c2e9 100644
--- a/arch/arm/mach-lpc32xx/clock.c
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -607,6 +607,19 @@
.get_rate = local_return_parent_rate,
};
+static struct clk clk_pwm = {
+ .parent = &clk_pclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_PWM_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN |
+ LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK |
+ LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(1) |
+ LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN |
+ LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK |
+ LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(1),
+ .get_rate = local_return_parent_rate,
+};
+
static struct clk clk_uart3 = {
.parent = &clk_pclk,
.enable = local_onoff_enable,
@@ -691,10 +704,21 @@
.parent = &clk_hclk,
.enable = local_onoff_enable,
.enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN,
+ .enable_mask = LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN |
+ LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
.get_rate = local_return_parent_rate,
};
+static struct clk clk_nand_mlc = {
+ .parent = &clk_hclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN |
+ LPC32XX_CLKPWR_NANDCLK_DMA_INT |
+ LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC,
+ .get_rate = local_return_parent_rate,
+};
+
static struct clk clk_i2s0 = {
.parent = &clk_hclk,
.enable = local_onoff_enable,
@@ -707,7 +731,8 @@
.parent = &clk_hclk,
.enable = local_onoff_enable,
.enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN,
+ .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN |
+ LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA,
.get_rate = local_return_parent_rate,
};
@@ -727,14 +752,77 @@
.get_rate = local_return_parent_rate,
};
+static int local_usb_enable(struct clk *clk, int enable)
+{
+ u32 tmp;
+
+ if (enable) {
+ /* Set up I2C pull levels */
+ tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
+ tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE;
+ __raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL);
+ }
+
+ return local_onoff_enable(clk, enable);
+}
+
static struct clk clk_usbd = {
.parent = &clk_usbpll,
- .enable = local_onoff_enable,
+ .enable = local_usb_enable,
.enable_reg = LPC32XX_CLKPWR_USB_CTRL,
.enable_mask = LPC32XX_CLKPWR_USBCTRL_HCLK_EN,
.get_rate = local_return_parent_rate,
};
+#define OTG_ALWAYS_MASK (LPC32XX_USB_OTG_OTG_CLOCK_ON | \
+ LPC32XX_USB_OTG_I2C_CLOCK_ON)
+
+static int local_usb_otg_enable(struct clk *clk, int enable)
+{
+ int to = 1000;
+
+ if (enable) {
+ __raw_writel(clk->enable_mask, clk->enable_reg);
+
+ while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) &
+ clk->enable_mask) != clk->enable_mask) && (to > 0))
+ to--;
+ } else {
+ __raw_writel(OTG_ALWAYS_MASK, clk->enable_reg);
+
+ while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) &
+ OTG_ALWAYS_MASK) != OTG_ALWAYS_MASK) && (to > 0))
+ to--;
+ }
+
+ if (to)
+ return 0;
+ else
+ return -1;
+}
+
+static struct clk clk_usb_otg_dev = {
+ .parent = &clk_usbpll,
+ .enable = local_usb_otg_enable,
+ .enable_reg = LPC32XX_USB_OTG_CLK_CTRL,
+ .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON |
+ LPC32XX_USB_OTG_OTG_CLOCK_ON |
+ LPC32XX_USB_OTG_DEV_CLOCK_ON |
+ LPC32XX_USB_OTG_I2C_CLOCK_ON,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_usb_otg_host = {
+ .parent = &clk_usbpll,
+ .enable = local_usb_otg_enable,
+ .enable_reg = LPC32XX_USB_OTG_CLK_CTRL,
+ .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON |
+ LPC32XX_USB_OTG_OTG_CLOCK_ON |
+ LPC32XX_USB_OTG_HOST_CLOCK_ON |
+ LPC32XX_USB_OTG_I2C_CLOCK_ON,
+ .get_rate = local_return_parent_rate,
+};
+
static int tsc_onoff_enable(struct clk *clk, int enable)
{
u32 tmp;
@@ -800,11 +888,17 @@
u32 tmp;
tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
- ~LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
+ ~(LPC32XX_CLKPWR_MSCARD_SDCARD_EN |
+ LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN |
+ LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS |
+ LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS |
+ LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS |
+ LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS);
/* If rate is 0, disable clock */
if (enable != 0)
- tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
+ tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN |
+ LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN;
__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
@@ -853,7 +947,7 @@
static int mmc_set_rate(struct clk *clk, unsigned long rate)
{
- u32 oldclk, tmp;
+ u32 tmp;
unsigned long prate, div, crate = mmc_round_rate(clk, rate);
prate = clk->parent->get_rate(clk->parent);
@@ -861,16 +955,12 @@
div = prate / crate;
/* The MMC clock must be on when accessing an MMC register */
- oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
- __raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
- LPC32XX_CLKPWR_MS_CTRL);
tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
- tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div);
+ tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div) |
+ LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
- __raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
-
return 0;
}
@@ -1111,6 +1201,7 @@
CLKDEV_INIT(NULL, "vfp9_ck", &clk_vfp9),
CLKDEV_INIT("pl08xdmac", NULL, &clk_dma),
CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt),
+ CLKDEV_INIT("4005c000.pwm", NULL, &clk_pwm),
CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3),
CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4),
CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5),
@@ -1120,8 +1211,9 @@
CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2),
CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0),
CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1),
- CLKDEV_INIT("lpc32xx_keys.0", NULL, &clk_kscan),
- CLKDEV_INIT("lpc32xx-nand.0", "nand_ck", &clk_nand),
+ CLKDEV_INIT("40050000.key", NULL, &clk_kscan),
+ CLKDEV_INIT("20020000.flash", NULL, &clk_nand),
+ CLKDEV_INIT("200a8000.flash", NULL, &clk_nand_mlc),
CLKDEV_INIT("40048000.adc", NULL, &clk_adc),
CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0),
CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1),
@@ -1130,6 +1222,9 @@
CLKDEV_INIT("31060000.ethernet", NULL, &clk_net),
CLKDEV_INIT("dev:clcd", NULL, &clk_lcd),
CLKDEV_INIT("31020000.usbd", "ck_usbd", &clk_usbd),
+ CLKDEV_INIT("31020000.ohci", "ck_usbd", &clk_usbd),
+ CLKDEV_INIT("31020000.usbd", "ck_usb_otg", &clk_usb_otg_dev),
+ CLKDEV_INIT("31020000.ohci", "ck_usb_otg", &clk_usb_otg_host),
CLKDEV_INIT("lpc32xx_rtc", NULL, &clk_rtc),
};
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index 5c96057..a48dc2d 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -26,6 +26,7 @@
#include <linux/io.h>
#include <asm/mach/map.h>
+#include <asm/system_info.h>
#include <mach/hardware.h>
#include <mach/platform.h>
@@ -224,7 +225,7 @@
;
}
-static int __init lpc32xx_display_uid(void)
+static int __init lpc32xx_check_uid(void)
{
u32 uid[4];
@@ -233,6 +234,11 @@
printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n",
uid[3], uid[2], uid[1], uid[0]);
+ if (!system_serial_low && !system_serial_high) {
+ system_serial_low = uid[0];
+ system_serial_high = uid[1];
+ }
+
return 1;
}
-arch_initcall(lpc32xx_display_uid);
+arch_initcall(lpc32xx_check_uid);
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h
index 2ba6ca4..0052e7a 100644
--- a/arch/arm/mach-lpc32xx/include/mach/gpio.h
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h
@@ -3,6 +3,4 @@
#include "gpio-lpc32xx.h"
-#define ARCH_NR_GPIOS (LPC32XX_GPO_P3_GRP + LPC32XX_GPO_P3_MAX)
-
#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/include/mach/platform.h
index c584f5b..acc4aab 100644
--- a/arch/arm/mach-lpc32xx/include/mach/platform.h
+++ b/arch/arm/mach-lpc32xx/include/mach/platform.h
@@ -694,4 +694,18 @@
#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C)
#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030)
+/*
+ * USB Otg Registers
+ */
+#define _OTGREG(x) io_p2v(LPC32XX_USB_OTG_BASE + (x))
+#define LPC32XX_USB_OTG_CLK_CTRL _OTGREG(0xFF4)
+#define LPC32XX_USB_OTG_CLK_STAT _OTGREG(0xFF8)
+
+/* USB OTG CLK CTRL bit defines */
+#define LPC32XX_USB_OTG_AHB_M_CLOCK_ON _BIT(4)
+#define LPC32XX_USB_OTG_OTG_CLOCK_ON _BIT(3)
+#define LPC32XX_USB_OTG_I2C_CLOCK_ON _BIT(2)
+#define LPC32XX_USB_OTG_DEV_CLOCK_ON _BIT(1)
+#define LPC32XX_USB_OTG_HOST_CLOCK_ON _BIT(0)
+
#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 540106c..b07dcc9 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -30,12 +30,13 @@
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/amba/pl022.h>
+#include <linux/amba/pl08x.h>
+#include <linux/amba/mmci.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
-#include <linux/amba/pl08x.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -50,9 +51,9 @@
/*
* Mapped GPIOLIB GPIOs
*/
-#define SPI0_CS_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
-#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
-#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
+#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
+#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
+#define MMC_PWR_ENABLE_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 5)
/*
* AMBA LCD controller
@@ -158,24 +159,6 @@
/*
* AMBA SSP (SPI)
*/
-static void phy3250_spi_cs_set(u32 control)
-{
- gpio_set_value(SPI0_CS_GPIO, (int) control);
-}
-
-static struct pl022_config_chip spi0_chip_info = {
- .com_mode = INTERRUPT_TRANSFER,
- .iface = SSP_INTERFACE_MOTOROLA_SPI,
- .hierarchy = SSP_MASTER,
- .slave_tx_disable = 0,
- .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM,
- .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC,
- .ctrl_len = SSP_BITS_8,
- .wait_state = SSP_MWIRE_WAIT_ZERO,
- .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
- .cs_control = phy3250_spi_cs_set,
-};
-
static struct pl022_ssp_controller lpc32xx_ssp0_data = {
.bus_id = 0,
.num_chipselect = 1,
@@ -188,45 +171,56 @@
.enable_dma = 0,
};
-/* AT25 driver registration */
-static int __init phy3250_spi_board_register(void)
+static struct pl08x_channel_data pl08x_slave_channels[] = {
+ {
+ .bus_id = "nand-slc",
+ .min_signal = 1, /* SLC NAND Flash */
+ .max_signal = 1,
+ .periph_buses = PL08X_AHB1,
+ },
+ {
+ .bus_id = "nand-mlc",
+ .min_signal = 12, /* MLC NAND Flash */
+ .max_signal = 12,
+ .periph_buses = PL08X_AHB1,
+ },
+};
+
+static int pl08x_get_signal(const struct pl08x_channel_data *cd)
{
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
- static struct spi_board_info info[] = {
- {
- .modalias = "spidev",
- .max_speed_hz = 5000000,
- .bus_num = 0,
- .chip_select = 0,
- .controller_data = &spi0_chip_info,
- },
- };
-
-#else
- static struct spi_eeprom eeprom = {
- .name = "at25256a",
- .byte_len = 0x8000,
- .page_size = 64,
- .flags = EE_ADDR2,
- };
-
- static struct spi_board_info info[] = {
- {
- .modalias = "at25",
- .max_speed_hz = 5000000,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_0,
- .platform_data = &eeprom,
- .controller_data = &spi0_chip_info,
- },
- };
-#endif
- return spi_register_board_info(info, ARRAY_SIZE(info));
+ return cd->min_signal;
}
-arch_initcall(phy3250_spi_board_register);
+
+static void pl08x_put_signal(const struct pl08x_channel_data *cd, int ch)
+{
+}
static struct pl08x_platform_data pl08x_pd = {
+ .slave_channels = &pl08x_slave_channels[0],
+ .num_slave_channels = ARRAY_SIZE(pl08x_slave_channels),
+ .get_signal = pl08x_get_signal,
+ .put_signal = pl08x_put_signal,
+ .lli_buses = PL08X_AHB1,
+ .mem_buses = PL08X_AHB1,
+};
+
+static int mmc_handle_ios(struct device *dev, struct mmc_ios *ios)
+{
+ /* Only on and off are supported */
+ if (ios->power_mode == MMC_POWER_OFF)
+ gpio_set_value(MMC_PWR_ENABLE_GPIO, 0);
+ else
+ gpio_set_value(MMC_PWR_ENABLE_GPIO, 1);
+ return 0;
+}
+
+static struct mmci_platform_data lpc32xx_mmci_data = {
+ .ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 |
+ MMC_VDD_32_33 | MMC_VDD_33_34,
+ .ios_handler = mmc_handle_ios,
+ .dma_filter = NULL,
+ /* No DMA for now since AMBA PL080 dmaengine driver only does scatter
+ * gather, and the MMCI driver doesn't do it this way */
};
static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
@@ -234,6 +228,8 @@
OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data),
OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data),
OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
+ OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd",
+ &lpc32xx_mmci_data),
{ }
};
@@ -241,10 +237,6 @@
{
u32 tmp;
- /* Setup SLC NAND controller muxing */
- __raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
- LPC32XX_CLKPWR_NAND_CLK_CTRL);
-
/* Setup LCD muxing to RGB565 */
tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) &
~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK |
@@ -252,47 +244,8 @@
tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16;
__raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL);
- /* Set up USB power */
- tmp = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
- tmp |= LPC32XX_CLKPWR_USBCTRL_HCLK_EN |
- LPC32XX_CLKPWR_USBCTRL_USBI2C_EN;
- __raw_writel(tmp, LPC32XX_CLKPWR_USB_CTRL);
-
- /* Set up I2C pull levels */
- tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
- tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE |
- LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE;
- __raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL);
-
- /* Disable IrDA pulsing support on UART6 */
- tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
- tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS;
- __raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
-
- /* Enable DMA for I2S1 channel */
- tmp = __raw_readl(LPC32XX_CLKPWR_I2S_CLK_CTRL);
- tmp = LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA;
- __raw_writel(tmp, LPC32XX_CLKPWR_I2S_CLK_CTRL);
-
lpc32xx_serial_init();
- /*
- * AMBA peripheral clocks need to be enabled prior to AMBA device
- * detection or a data fault will occur, so enable the clocks
- * here.
- */
- tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
- __raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN),
- LPC32XX_CLKPWR_LCDCLK_CTRL);
-
- tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL);
- __raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN),
- LPC32XX_CLKPWR_SSP_CLK_CTRL);
-
- tmp = __raw_readl(LPC32XX_CLKPWR_DMA_CLK_CTRL);
- __raw_writel((tmp | LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN),
- LPC32XX_CLKPWR_DMA_CLK_CTRL);
-
/* Test clock needed for UDA1380 initial init */
__raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
@@ -302,12 +255,10 @@
lpc32xx_auxdata_lookup, NULL);
/* Register GPIOs used on this board */
- if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
- printk(KERN_ERR "Error requesting gpio %u",
- SPI0_CS_GPIO);
- else if (gpio_direction_output(SPI0_CS_GPIO, 1))
- printk(KERN_ERR "Error setting gpio %u to output",
- SPI0_CS_GPIO);
+ if (gpio_request(MMC_PWR_ENABLE_GPIO, "mmc_power_en"))
+ pr_err("Error requesting gpio %u", MMC_PWR_ENABLE_GPIO);
+ else if (gpio_direction_output(MMC_PWR_ENABLE_GPIO, 1))
+ pr_err("Error setting gpio %u to output", MMC_PWR_ENABLE_GPIO);
}
static char const *lpc32xx_dt_compat[] __initdata = {
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index f273528..05621a2 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -31,59 +31,6 @@
#define LPC32XX_SUART_FIFO_SIZE 64
-/* Standard 8250/16550 compatible serial ports */
-static struct plat_serial8250_port serial_std_platform_data[] = {
-#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
- {
- .membase = io_p2v(LPC32XX_UART5_BASE),
- .mapbase = LPC32XX_UART5_BASE,
- .irq = IRQ_LPC32XX_UART_IIR5,
- .uartclk = LPC32XX_MAIN_OSC_FREQ,
- .regshift = 2,
- .iotype = UPIO_MEM32,
- .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
- UPF_SKIP_TEST,
- },
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
- {
- .membase = io_p2v(LPC32XX_UART3_BASE),
- .mapbase = LPC32XX_UART3_BASE,
- .irq = IRQ_LPC32XX_UART_IIR3,
- .uartclk = LPC32XX_MAIN_OSC_FREQ,
- .regshift = 2,
- .iotype = UPIO_MEM32,
- .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
- UPF_SKIP_TEST,
- },
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
- {
- .membase = io_p2v(LPC32XX_UART4_BASE),
- .mapbase = LPC32XX_UART4_BASE,
- .irq = IRQ_LPC32XX_UART_IIR4,
- .uartclk = LPC32XX_MAIN_OSC_FREQ,
- .regshift = 2,
- .iotype = UPIO_MEM32,
- .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
- UPF_SKIP_TEST,
- },
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
- {
- .membase = io_p2v(LPC32XX_UART6_BASE),
- .mapbase = LPC32XX_UART6_BASE,
- .irq = IRQ_LPC32XX_UART_IIR6,
- .uartclk = LPC32XX_MAIN_OSC_FREQ,
- .regshift = 2,
- .iotype = UPIO_MEM32,
- .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
- UPF_SKIP_TEST,
- },
-#endif
- { },
-};
-
struct uartinit {
char *uart_ck_name;
u32 ck_mode_mask;
@@ -92,7 +39,6 @@
};
static struct uartinit uartinit_data[] __initdata = {
-#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
{
.uart_ck_name = "uart5_ck",
.ck_mode_mask =
@@ -100,8 +46,6 @@
.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
.mapbase = LPC32XX_UART5_BASE,
},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
{
.uart_ck_name = "uart3_ck",
.ck_mode_mask =
@@ -109,8 +53,6 @@
.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
.mapbase = LPC32XX_UART3_BASE,
},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
{
.uart_ck_name = "uart4_ck",
.ck_mode_mask =
@@ -118,8 +60,6 @@
.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
.mapbase = LPC32XX_UART4_BASE,
},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
{
.uart_ck_name = "uart6_ck",
.ck_mode_mask =
@@ -127,19 +67,6 @@
.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
.mapbase = LPC32XX_UART6_BASE,
},
-#endif
-};
-
-static struct platform_device serial_std_platform_device = {
- .name = "serial8250",
- .id = 0,
- .dev = {
- .platform_data = serial_std_platform_data,
- },
-};
-
-static struct platform_device *lpc32xx_serial_devs[] __initdata = {
- &serial_std_platform_device,
};
void __init lpc32xx_serial_init(void)
@@ -156,15 +83,8 @@
clk = clk_get(NULL, uartinit_data[i].uart_ck_name);
if (!IS_ERR(clk)) {
clk_enable(clk);
- serial_std_platform_data[i].uartclk =
- clk_get_rate(clk);
}
- /* Fall back on main osc rate if clock rate return fails */
- if (serial_std_platform_data[i].uartclk == 0)
- serial_std_platform_data[i].uartclk =
- LPC32XX_MAIN_OSC_FREQ;
-
/* Setup UART clock modes for all UARTs, disable autoclock */
clkmodes |= uartinit_data[i].ck_mode_mask;
@@ -189,7 +109,7 @@
__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
/* Force a flush of the RX FIFOs to work around a HW bug */
- puart = serial_std_platform_data[i].mapbase;
+ puart = uartinit_data[i].mapbase;
__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
__raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
j = LPC32XX_SUART_FIFO_SIZE;
@@ -198,11 +118,13 @@
__raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
}
+ /* Disable IrDA pulsing support on UART6 */
+ tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
+ tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS;
+ __raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
+
/* Disable UART5->USB transparent mode or USB won't work */
tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
tmp &= ~LPC32XX_UART_U5_ROUTE_TO_USB;
__raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
-
- platform_add_devices(lpc32xx_serial_devs,
- ARRAY_SIZE(lpc32xx_serial_devs));
}
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
deleted file mode 100644
index 0e135a5..0000000
--- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_MACH_GPIO_PXA_H
-#define __ASM_MACH_GPIO_PXA_H
-
-#include <mach/addr-map.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-
-#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
-
-/* NOTE: these macros are defined here to make optimization of
- * gpio_{get,set}_value() to work when 'gpio' is a constant.
- * Usage of these macros otherwise is no longer recommended,
- * use generic GPIO API whenever possible.
- */
-#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
-
-#include <plat/gpio-pxa.h>
-
-#endif /* __ASM_MACH_GPIO_PXA_H */
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c
index fcfe0e3..e60c7d9 100644
--- a/arch/arm/mach-mmp/irq.c
+++ b/arch/arm/mach-mmp/irq.c
@@ -241,6 +241,7 @@
icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE;
icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE;
icu_data[1].nr_irqs = 2;
+ icu_data[1].cascade_irq = 4;
icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE;
icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs,
icu_data[1].virq_base, 0,
@@ -249,6 +250,7 @@
icu_data[2].reg_status = mmp_icu_base + 0x154;
icu_data[2].reg_mask = mmp_icu_base + 0x16c;
icu_data[2].nr_irqs = 2;
+ icu_data[2].cascade_irq = 5;
icu_data[2].virq_base = IRQ_MMP2_RTC_BASE;
icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs,
icu_data[2].virq_base, 0,
@@ -257,6 +259,7 @@
icu_data[3].reg_status = mmp_icu_base + 0x180;
icu_data[3].reg_mask = mmp_icu_base + 0x17c;
icu_data[3].nr_irqs = 3;
+ icu_data[3].cascade_irq = 9;
icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE;
icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs,
icu_data[3].virq_base, 0,
@@ -265,6 +268,7 @@
icu_data[4].reg_status = mmp_icu_base + 0x158;
icu_data[4].reg_mask = mmp_icu_base + 0x170;
icu_data[4].nr_irqs = 5;
+ icu_data[4].cascade_irq = 17;
icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE;
icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs,
icu_data[4].virq_base, 0,
@@ -273,6 +277,7 @@
icu_data[5].reg_status = mmp_icu_base + 0x15c;
icu_data[5].reg_mask = mmp_icu_base + 0x174;
icu_data[5].nr_irqs = 15;
+ icu_data[5].cascade_irq = 35;
icu_data[5].virq_base = IRQ_MMP2_MISC_BASE;
icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs,
icu_data[5].virq_base, 0,
@@ -281,6 +286,7 @@
icu_data[6].reg_status = mmp_icu_base + 0x160;
icu_data[6].reg_mask = mmp_icu_base + 0x178;
icu_data[6].nr_irqs = 2;
+ icu_data[6].cascade_irq = 51;
icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE;
icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs,
icu_data[6].virq_base, 0,
@@ -289,6 +295,7 @@
icu_data[7].reg_status = mmp_icu_base + 0x188;
icu_data[7].reg_mask = mmp_icu_base + 0x184;
icu_data[7].nr_irqs = 2;
+ icu_data[7].cascade_irq = 55;
icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE;
icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs,
icu_data[7].virq_base, 0,
diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
index c64dbb9..eb187e0 100644
--- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
@@ -31,5 +31,6 @@
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index 3674497..e807c4c 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -42,6 +42,7 @@
#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000
#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000
#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000
+#define MV78XX0_CORE_REGS_PHYS_BASE 0xfe400000
#define MV78XX0_CORE_REGS_SIZE SZ_16K
#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20))
@@ -59,6 +60,7 @@
* Core-specific peripheral registers.
*/
#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE)
+#define BRIDGE_PHYS_BASE (MV78XX0_CORE_REGS_PHYS_BASE)
/*
* Register Map
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
new file mode 100644
index 0000000..caa2c5e
--- /dev/null
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -0,0 +1,16 @@
+if ARCH_MVEBU
+
+menu "Marvell SOC with device tree"
+
+config MACH_ARMADA_370_XP
+ bool "Marvell Armada 370 and Aramada XP boards"
+ select ARMADA_370_XP_TIMER
+ select CPU_V7
+ help
+
+ Say 'Y' here if you want your kernel to support boards based on
+ Marvell Armada 370 or Armada XP with device tree.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
new file mode 100644
index 0000000..e61d2b8
--- /dev/null
+++ b/arch/arm/mach-mvebu/Makefile
@@ -0,0 +1,2 @@
+obj-y += system-controller.o
+obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o
diff --git a/arch/arm/mach-mvebu/Makefile.boot b/arch/arm/mach-mvebu/Makefile.boot
new file mode 100644
index 0000000..2579a2f
--- /dev/null
+++ b/arch/arm/mach-mvebu/Makefile.boot
@@ -0,0 +1,3 @@
+zreladdr-y := 0x00008000
+dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-db.dtb
+dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-xp-db.dtb
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
new file mode 100644
index 0000000..4ef923b
--- /dev/null
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -0,0 +1,63 @@
+/*
+ * Device Tree support for Armada 370 and XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/time-armada-370-xp.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <mach/armada-370-xp.h>
+#include "common.h"
+
+static struct map_desc armada_370_xp_io_desc[] __initdata = {
+ {
+ .virtual = ARMADA_370_XP_REGS_VIRT_BASE,
+ .pfn = __phys_to_pfn(ARMADA_370_XP_REGS_PHYS_BASE),
+ .length = ARMADA_370_XP_REGS_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init armada_370_xp_map_io(void)
+{
+ iotable_init(armada_370_xp_io_desc, ARRAY_SIZE(armada_370_xp_io_desc));
+}
+
+struct sys_timer armada_370_xp_timer = {
+ .init = armada_370_xp_timer_init,
+};
+
+static void __init armada_370_xp_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const armada_370_xp_dt_board_dt_compat[] = {
+ "marvell,a370-db",
+ "marvell,axp-db",
+ NULL,
+};
+
+DT_MACHINE_START(ARMADA_XP_DT, "Marvell Aramada 370/XP (Device Tree)")
+ .init_machine = armada_370_xp_dt_init,
+ .map_io = armada_370_xp_map_io,
+ .init_irq = armada_370_xp_init_irq,
+ .handle_irq = armada_370_xp_handle_irq,
+ .timer = &armada_370_xp_timer,
+ .restart = mvebu_restart,
+ .dt_compat = armada_370_xp_dt_board_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h
new file mode 100644
index 0000000..02f89ea
--- /dev/null
+++ b/arch/arm/mach-mvebu/common.h
@@ -0,0 +1,23 @@
+/*
+ * Core functions for Marvell System On Chip
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_MVEBU_COMMON_H
+#define __ARCH_MVEBU_COMMON_H
+
+void mvebu_restart(char mode, const char *cmd);
+
+void armada_370_xp_init_irq(void);
+void armada_370_xp_handle_irq(struct pt_regs *regs);
+
+#endif
diff --git a/arch/arm/mach-mvebu/include/mach/armada-370-xp.h b/arch/arm/mach-mvebu/include/mach/armada-370-xp.h
new file mode 100644
index 0000000..25f0ca8
--- /dev/null
+++ b/arch/arm/mach-mvebu/include/mach/armada-370-xp.h
@@ -0,0 +1,22 @@
+/*
+ * Generic definitions for Marvell Armada_370_XP SoCs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_ARMADA_370_XP_H
+#define __MACH_ARMADA_370_XP_H
+
+#define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000
+#define ARMADA_370_XP_REGS_VIRT_BASE 0xfeb00000
+#define ARMADA_370_XP_REGS_SIZE SZ_1M
+
+#endif /* __MACH_ARMADA_370_XP_H */
diff --git a/arch/arm/mach-mvebu/include/mach/debug-macro.S b/arch/arm/mach-mvebu/include/mach/debug-macro.S
new file mode 100644
index 0000000..2282576
--- /dev/null
+++ b/arch/arm/mach-mvebu/include/mach/debug-macro.S
@@ -0,0 +1,24 @@
+/*
+ * Early serial output macro for Marvell SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/armada-370-xp.h>
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =ARMADA_370_XP_REGS_PHYS_BASE
+ ldr \rv, =ARMADA_370_XP_REGS_VIRT_BASE
+ orr \rp, \rp, #0x00012000
+ orr \rv, \rv, #0x00012000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-mvebu/include/mach/timex.h b/arch/arm/mach-mvebu/include/mach/timex.h
new file mode 100644
index 0000000..ab324a37
--- /dev/null
+++ b/arch/arm/mach-mvebu/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * Marvell Armada SoC time definitions
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-mvebu/include/mach/uncompress.h b/arch/arm/mach-mvebu/include/mach/uncompress.h
new file mode 100644
index 0000000..d6a100c
--- /dev/null
+++ b/arch/arm/mach-mvebu/include/mach/uncompress.h
@@ -0,0 +1,43 @@
+/*
+ * Marvell Armada SoC kernel uncompression UART routines
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/armada-370-xp.h>
+
+#define UART_THR ((volatile unsigned char *)(ARMADA_370_XP_REGS_PHYS_BASE\
+ + 0x12000))
+#define UART_LSR ((volatile unsigned char *)(ARMADA_370_XP_REGS_PHYS_BASE\
+ + 0x12014))
+
+#define LSR_THRE 0x20
+
+static void putc(const char c)
+{
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ /* Transmit fifo not full? */
+ if (*UART_LSR & LSR_THRE)
+ break;
+ }
+
+ *UART_THR = c;
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/arch/arm/mach-mvebu/irq-armada-370-xp.c
new file mode 100644
index 0000000..5f5f939
--- /dev/null
+++ b/arch/arm/mach-mvebu/irq-armada-370-xp.c
@@ -0,0 +1,133 @@
+/*
+ * Marvell Armada 370 and Armada XP SoC IRQ handling
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Ben Dooks <ben.dooks@codethink.co.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+#include <asm/mach/arch.h>
+#include <asm/exception.h>
+
+/* Interrupt Controller Registers Map */
+#define ARMADA_370_XP_INT_SET_MASK_OFFS (0x48)
+#define ARMADA_370_XP_INT_CLEAR_MASK_OFFS (0x4C)
+
+#define ARMADA_370_XP_INT_CONTROL (0x00)
+#define ARMADA_370_XP_INT_SET_ENABLE_OFFS (0x30)
+#define ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS (0x34)
+
+#define ARMADA_370_XP_CPU_INTACK_OFFS (0x44)
+
+static void __iomem *per_cpu_int_base;
+static void __iomem *main_int_base;
+static struct irq_domain *armada_370_xp_mpic_domain;
+
+static void armada_370_xp_irq_mask(struct irq_data *d)
+{
+ writel(irqd_to_hwirq(d),
+ per_cpu_int_base + ARMADA_370_XP_INT_SET_MASK_OFFS);
+}
+
+static void armada_370_xp_irq_unmask(struct irq_data *d)
+{
+ writel(irqd_to_hwirq(d),
+ per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
+}
+
+static struct irq_chip armada_370_xp_irq_chip = {
+ .name = "armada_370_xp_irq",
+ .irq_mask = armada_370_xp_irq_mask,
+ .irq_mask_ack = armada_370_xp_irq_mask,
+ .irq_unmask = armada_370_xp_irq_unmask,
+};
+
+static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
+ unsigned int virq, irq_hw_number_t hw)
+{
+ armada_370_xp_irq_mask(irq_get_irq_data(virq));
+ writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
+
+ irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
+ handle_level_irq);
+ irq_set_status_flags(virq, IRQ_LEVEL);
+ set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
+
+ return 0;
+}
+
+static struct irq_domain_ops armada_370_xp_mpic_irq_ops = {
+ .map = armada_370_xp_mpic_irq_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int __init armada_370_xp_mpic_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ u32 control;
+
+ main_int_base = of_iomap(node, 0);
+ per_cpu_int_base = of_iomap(node, 1);
+
+ BUG_ON(!main_int_base);
+ BUG_ON(!per_cpu_int_base);
+
+ control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL);
+
+ armada_370_xp_mpic_domain =
+ irq_domain_add_linear(node, (control >> 2) & 0x3ff,
+ &armada_370_xp_mpic_irq_ops, NULL);
+
+ if (!armada_370_xp_mpic_domain)
+ panic("Unable to add Armada_370_Xp MPIC irq domain (DT)\n");
+
+ irq_set_default_host(armada_370_xp_mpic_domain);
+ return 0;
+}
+
+asmlinkage void __exception_irq_entry armada_370_xp_handle_irq(struct pt_regs
+ *regs)
+{
+ u32 irqstat, irqnr;
+
+ do {
+ irqstat = readl_relaxed(per_cpu_int_base +
+ ARMADA_370_XP_CPU_INTACK_OFFS);
+ irqnr = irqstat & 0x3FF;
+
+ if (irqnr < 1023) {
+ irqnr =
+ irq_find_mapping(armada_370_xp_mpic_domain, irqnr);
+ handle_IRQ(irqnr, regs);
+ continue;
+ }
+
+ break;
+ } while (1);
+}
+
+static const struct of_device_id mpic_of_match[] __initconst = {
+ {.compatible = "marvell,mpic", .data = armada_370_xp_mpic_of_init},
+ {},
+};
+
+void __init armada_370_xp_init_irq(void)
+{
+ of_irq_init(mpic_of_match);
+}
diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c
new file mode 100644
index 0000000..b8079df
--- /dev/null
+++ b/arch/arm/mach-mvebu/system-controller.c
@@ -0,0 +1,105 @@
+/*
+ * System controller support for Armada 370 and XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The Armada 370 and Armada XP SoCs both have a range of
+ * miscellaneous registers, that do not belong to a particular device,
+ * but rather provide system-level features. This basic
+ * system-controller driver provides a device tree binding for those
+ * registers, and implements utility functions offering various
+ * features related to those registers.
+ *
+ * For now, the feature set is limited to restarting the platform by a
+ * soft-reset, but it might be extended in the future.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+static void __iomem *system_controller_base;
+
+struct mvebu_system_controller {
+ u32 rstoutn_mask_offset;
+ u32 system_soft_reset_offset;
+
+ u32 rstoutn_mask_reset_out_en;
+ u32 system_soft_reset;
+};
+static struct mvebu_system_controller *mvebu_sc;
+
+const struct mvebu_system_controller armada_370_xp_system_controller = {
+ .rstoutn_mask_offset = 0x60,
+ .system_soft_reset_offset = 0x64,
+ .rstoutn_mask_reset_out_en = 0x1,
+ .system_soft_reset = 0x1,
+};
+
+const struct mvebu_system_controller orion_system_controller = {
+ .rstoutn_mask_offset = 0x108,
+ .system_soft_reset_offset = 0x10c,
+ .rstoutn_mask_reset_out_en = 0x4,
+ .system_soft_reset = 0x1,
+};
+
+static struct of_device_id of_system_controller_table[] = {
+ {
+ .compatible = "marvell,orion-system-controller",
+ .data = (void *) &orion_system_controller,
+ }, {
+ .compatible = "marvell,armada-370-xp-system-controller",
+ .data = (void *) &armada_370_xp_system_controller,
+ },
+ { /* end of list */ },
+};
+
+void mvebu_restart(char mode, const char *cmd)
+{
+ if (!system_controller_base) {
+ pr_err("Cannot restart, system-controller not available: check the device tree\n");
+ } else {
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(mvebu_sc->rstoutn_mask_reset_out_en,
+ system_controller_base +
+ mvebu_sc->rstoutn_mask_offset);
+ /*
+ * Assert soft reset.
+ */
+ writel(mvebu_sc->system_soft_reset,
+ system_controller_base +
+ mvebu_sc->system_soft_reset_offset);
+ }
+
+ while (1)
+ ;
+}
+
+static int __init mvebu_system_controller_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, of_system_controller_table);
+ if (np) {
+ const struct of_device_id *match =
+ of_match_node(of_system_controller_table, np);
+ BUG_ON(!match);
+ system_controller_base = of_iomap(np, 0);
+ mvebu_sc = (struct mvebu_system_controller *)match->data;
+ }
+
+ return 0;
+}
+
+arch_initcall(mvebu_system_controller_init);
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 91cf062..ccdf83b 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -16,6 +16,7 @@
bool
select ARM_AMBA
select CPU_ARM926T
+ select HAVE_CAN_FLEXCAN if CAN
select HAVE_PWM
select PINCTRL_IMX28
diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot
index 07b11fe..4582999 100644
--- a/arch/arm/mach-mxs/Makefile.boot
+++ b/arch/arm/mach-mxs/Makefile.boot
@@ -1 +1,10 @@
zreladdr-y += 0x40008000
+
+dtb-y += imx23-evk.dtb \
+ imx23-olinuxino.dtb \
+ imx23-stmp378x_devb.dtb \
+ imx28-apx4devkit.dtb \
+ imx28-cfa10036.dtb \
+ imx28-evk.dtb \
+ imx28-m28evk.dtb \
+ imx28-tx28.dtb \
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
index 9acdd63..9ee5ced 100644
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -10,7 +10,7 @@
*/
#include <mach/mx23.h>
#include <mach/devices-common.h>
-#include <mach/mxsfb.h>
+#include <linux/mxsfb.h>
#include <linux/amba/bus.h>
static inline int mx23_add_duart(void)
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 84b2960..fcab431 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -10,7 +10,7 @@
*/
#include <mach/mx28.h>
#include <mach/devices-common.h>
-#include <mach/mxsfb.h>
+#include <linux/mxsfb.h>
#include <linux/amba/bus.h>
static inline int mx28_add_duart(void)
diff --git a/arch/arm/mach-mxs/devices/platform-mxsfb.c b/arch/arm/mach-mxs/devices/platform-mxsfb.c
index 5a75b71..76b53f73 100644
--- a/arch/arm/mach-mxs/devices/platform-mxsfb.c
+++ b/arch/arm/mach-mxs/devices/platform-mxsfb.c
@@ -10,7 +10,7 @@
#include <mach/mx23.h>
#include <mach/mx28.h>
#include <mach/devices-common.h>
-#include <mach/mxsfb.h>
+#include <linux/mxsfb.h>
#ifdef CONFIG_SOC_IMX23
struct platform_device *__init mx23_add_mxsfb(
diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c
index 5e90b9d..f5f0617 100644
--- a/arch/arm/mach-mxs/mach-apx4devkit.c
+++ b/arch/arm/mach-mxs/mach-apx4devkit.c
@@ -205,6 +205,16 @@
return 0;
}
+static void __init apx4devkit_fec_phy_clk_enable(void)
+{
+ struct clk *clk;
+
+ /* Enable fec phy clock */
+ clk = clk_get_sys("enet_out", NULL);
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
+}
+
static void __init apx4devkit_init(void)
{
mx28_soc_init();
@@ -225,6 +235,7 @@
phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
apx4devkit_phy_fixup);
+ apx4devkit_fec_phy_clk_enable();
mx28_add_fec(0, &mx28_fec_pdata);
mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 8cac94b..648bdd0 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -16,12 +16,95 @@
#include <linux/init.h>
#include <linux/init.h>
#include <linux/irqdomain.h>
+#include <linux/micrel_phy.h>
+#include <linux/mxsfb.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <linux/phy.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
+static struct fb_videomode mx23evk_video_modes[] = {
+ {
+ .name = "Samsung-LMS430HF02",
+ .refresh = 60,
+ .xres = 480,
+ .yres = 272,
+ .pixclock = 108096, /* picosecond (9.2 MHz) */
+ .left_margin = 15,
+ .right_margin = 8,
+ .upper_margin = 12,
+ .lower_margin = 4,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
+ FB_SYNC_DOTCLK_FAILING_ACT,
+ },
+};
+
+static struct fb_videomode mx28evk_video_modes[] = {
+ {
+ .name = "Seiko-43WVF1G",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 29851, /* picosecond (33.5 MHz) */
+ .left_margin = 89,
+ .right_margin = 164,
+ .upper_margin = 23,
+ .lower_margin = 10,
+ .hsync_len = 10,
+ .vsync_len = 10,
+ .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
+ FB_SYNC_DOTCLK_FAILING_ACT,
+ },
+};
+
+static struct fb_videomode m28evk_video_modes[] = {
+ {
+ .name = "Ampire AM-800480R2TMQW-T01H",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 30066, /* picosecond (33.26 MHz) */
+ .left_margin = 0,
+ .right_margin = 256,
+ .upper_margin = 0,
+ .lower_margin = 45,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT,
+ },
+};
+
+static struct fb_videomode apx4devkit_video_modes[] = {
+ {
+ .name = "HannStar PJ70112A",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 33333, /* picosecond (30.00 MHz) */
+ .left_margin = 88,
+ .right_margin = 40,
+ .upper_margin = 32,
+ .lower_margin = 13,
+ .hsync_len = 48,
+ .vsync_len = 3,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
+ FB_SYNC_DATA_ENABLE_HIGH_ACT |
+ FB_SYNC_DOTCLK_FAILING_ACT,
+ },
+};
+
+static struct mxsfb_platform_data mxsfb_pdata __initdata;
+
+static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata),
+ OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata),
+ { /* sentinel */ }
+};
+
static int __init mxs_icoll_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
@@ -71,33 +154,155 @@
.init = imx28_timer_init,
};
-static void __init imx28_evk_init(void)
-{
- struct clk *clk;
+enum mac_oui {
+ OUI_FSL,
+ OUI_DENX,
+};
- /* Enable fec phy clock */
- clk = clk_get_sys("enet_out", NULL);
+static void __init update_fec_mac_prop(enum mac_oui oui)
+{
+ struct device_node *np, *from = NULL;
+ struct property *oldmac, *newmac;
+ const u32 *ocotp = mxs_get_ocotp();
+ u8 *macaddr;
+ u32 val;
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ np = of_find_compatible_node(from, NULL, "fsl,imx28-fec");
+ if (!np)
+ return;
+ from = np;
+
+ newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL);
+ if (!newmac)
+ return;
+ newmac->value = newmac + 1;
+ newmac->length = 6;
+
+ newmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+ if (!newmac->name) {
+ kfree(newmac);
+ return;
+ }
+
+ /*
+ * OCOTP only stores the last 4 octets for each mac address,
+ * so hard-code OUI here.
+ */
+ macaddr = newmac->value;
+ switch (oui) {
+ case OUI_FSL:
+ macaddr[0] = 0x00;
+ macaddr[1] = 0x04;
+ macaddr[2] = 0x9f;
+ break;
+ case OUI_DENX:
+ macaddr[0] = 0xc0;
+ macaddr[1] = 0xe5;
+ macaddr[2] = 0x4e;
+ break;
+ }
+ val = ocotp[i];
+ macaddr[3] = (val >> 16) & 0xff;
+ macaddr[4] = (val >> 8) & 0xff;
+ macaddr[5] = (val >> 0) & 0xff;
+
+ oldmac = of_find_property(np, newmac->name, NULL);
+ if (oldmac)
+ prom_update_property(np, newmac, oldmac);
+ else
+ prom_add_property(np, newmac);
+ }
+}
+
+static void __init imx23_evk_init(void)
+{
+ mxsfb_pdata.mode_list = mx23evk_video_modes;
+ mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes);
+ mxsfb_pdata.default_bpp = 32;
+ mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+}
+
+static inline void enable_clk_enet_out(void)
+{
+ struct clk *clk = clk_get_sys("enet_out", NULL);
+
if (!IS_ERR(clk))
clk_prepare_enable(clk);
}
+static void __init imx28_evk_init(void)
+{
+ enable_clk_enet_out();
+ update_fec_mac_prop(OUI_FSL);
+
+ mxsfb_pdata.mode_list = mx28evk_video_modes;
+ mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
+ mxsfb_pdata.default_bpp = 32;
+ mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+}
+
+static void __init m28evk_init(void)
+{
+ enable_clk_enet_out();
+ update_fec_mac_prop(OUI_DENX);
+
+ mxsfb_pdata.mode_list = m28evk_video_modes;
+ mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
+ mxsfb_pdata.default_bpp = 16;
+ mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+}
+
+static int apx4devkit_phy_fixup(struct phy_device *phy)
+{
+ phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
+ return 0;
+}
+
+static void __init apx4devkit_init(void)
+{
+ enable_clk_enet_out();
+
+ if (IS_BUILTIN(CONFIG_PHYLIB))
+ phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
+ apx4devkit_phy_fixup);
+
+ mxsfb_pdata.mode_list = apx4devkit_video_modes;
+ mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes);
+ mxsfb_pdata.default_bpp = 32;
+ mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+}
+
static void __init mxs_machine_init(void)
{
if (of_machine_is_compatible("fsl,imx28-evk"))
imx28_evk_init();
+ else if (of_machine_is_compatible("fsl,imx23-evk"))
+ imx23_evk_init();
+ else if (of_machine_is_compatible("denx,m28evk"))
+ m28evk_init();
+ else if (of_machine_is_compatible("bluegiga,apx4devkit"))
+ apx4devkit_init();
of_platform_populate(NULL, of_default_bus_match_table,
- NULL, NULL);
+ mxs_auxdata_lookup, NULL);
}
static const char *imx23_dt_compat[] __initdata = {
"fsl,imx23-evk",
+ "fsl,stmp378x_devb"
+ "olimex,imx23-olinuxino",
"fsl,imx23",
NULL,
};
static const char *imx28_dt_compat[] __initdata = {
+ "bluegiga,apx4devkit",
+ "crystalfontz,cfa10036",
+ "denx,m28evk",
"fsl,imx28-evk",
+ "karo,tx28",
"fsl,imx28",
NULL,
};
diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c
index 9a7b08b..0f71f82 100644
--- a/arch/arm/mach-mxs/module-tx28.c
+++ b/arch/arm/mach-mxs/module-tx28.c
@@ -11,7 +11,7 @@
#include <linux/gpio.h>
#include <mach/iomux-mx28.h>
-#include "../devices-mx28.h"
+#include "devices-mx28.h"
#include "module-tx28.h"
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index a6bbd1a..a42c9a3 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -7,8 +7,6 @@
# Object file lists.
-obj-y += clock.o
-
# Cpu revision
obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 2e8d3e1..f4535a7 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -14,12 +14,14 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
+#include <linux/amba/mmci.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/onenand.h>
#include <linux/mtd/partitions.h>
+#include <linux/i2c.h>
#include <linux/io.h>
#include <asm/hardware/vic.h>
#include <asm/sizes.h>
@@ -185,17 +187,29 @@
#endif
}
-static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE,
- { IRQ_UART0 }, NULL);
-
-static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE,
- { IRQ_UART1 }, NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
- &uart0_device,
- &uart1_device,
+static struct mmci_platform_data mmcsd_plat_data = {
+ .ocr_mask = MMC_VDD_29_30,
+ .f_max = 48000000,
+ .gpio_wp = -1,
+ .gpio_cd = 111,
+ .cd_invert = true,
+ .capabilities = MMC_CAP_MMC_HIGHSPEED |
+ MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA,
};
+static int __init nhk8815_mmcsd_init(void)
+{
+ int ret;
+
+ ret = gpio_request(112, "card detect bias");
+ if (ret)
+ return ret;
+ gpio_direction_output(112, 0);
+ amba_apb_device_add(NULL, "mmci", NOMADIK_SDI_BASE, SZ_4K, IRQ_SDMMC, 0, &mmcsd_plat_data, 0x10180180);
+ return 0;
+}
+module_init(nhk8815_mmcsd_init);
+
static struct resource nhk8815_eth_resources[] = {
{
.name = "smc91x-regs",
@@ -253,17 +267,46 @@
.init = nomadik_timer_init,
};
+static struct i2c_board_info __initdata nhk8815_i2c0_devices[] = {
+ {
+ I2C_BOARD_INFO("stw4811", 0x2d),
+ },
+};
+
+static struct i2c_board_info __initdata nhk8815_i2c1_devices[] = {
+ {
+ I2C_BOARD_INFO("camera", 0x10),
+ },
+ {
+ I2C_BOARD_INFO("stw5095", 0x1a),
+ },
+ {
+ I2C_BOARD_INFO("lis3lv02dl", 0x1d),
+ },
+};
+
+static struct i2c_board_info __initdata nhk8815_i2c2_devices[] = {
+ {
+ I2C_BOARD_INFO("stw4811-usb", 0x2d),
+ },
+};
+
static void __init nhk8815_platform_init(void)
{
- int i;
-
cpu8815_platform_init();
nhk8815_onenand_init();
platform_add_devices(nhk8815_platform_devices,
ARRAY_SIZE(nhk8815_platform_devices));
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
- amba_device_register(amba_devs[i], &iomem_resource);
+ amba_apb_device_add(NULL, "uart0", NOMADIK_UART0_BASE, SZ_4K, IRQ_UART0, 0, NULL, 0);
+ amba_apb_device_add(NULL, "uart1", NOMADIK_UART1_BASE, SZ_4K, IRQ_UART1, 0, NULL, 0);
+
+ i2c_register_board_info(0, nhk8815_i2c0_devices,
+ ARRAY_SIZE(nhk8815_i2c0_devices));
+ i2c_register_board_info(1, nhk8815_i2c1_devices,
+ ARRAY_SIZE(nhk8815_i2c1_devices));
+ i2c_register_board_info(2, nhk8815_i2c2_devices,
+ ARRAY_SIZE(nhk8815_i2c2_devices));
}
MACHINE_START(NOMADIK, "NHK8815")
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
deleted file mode 100644
index 48a59f2..0000000
--- a/arch/arm/mach-nomadik/clock.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/arch/arm/mach-nomadik/clock.c
- *
- * Copyright (C) 2009 Alessandro Rubini
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include "clock.h"
-
-/*
- * The nomadik board uses generic clocks, but the serial pl011 file
- * calls clk_enable(), clk_disable(), clk_get_rate(), so we provide them
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/* enable and disable do nothing */
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-static struct clk clk_24 = {
- .rate = 2400000,
-};
-
-static struct clk clk_48 = {
- .rate = 48 * 1000 * 1000,
-};
-
-/*
- * Catch-all default clock to satisfy drivers using the clk API. We don't
- * model the actual hardware clocks yet.
- */
-static struct clk clk_default;
-
-#define CLK(_clk, dev) \
- { \
- .clk = _clk, \
- .dev_id = dev, \
- }
-
-static struct clk_lookup lookups[] = {
- {
- .con_id = "apb_pclk",
- .clk = &clk_default,
- },
- CLK(&clk_24, "mtu0"),
- CLK(&clk_24, "mtu1"),
- CLK(&clk_48, "uart0"),
- CLK(&clk_48, "uart1"),
- CLK(&clk_default, "gpio.0"),
- CLK(&clk_default, "gpio.1"),
- CLK(&clk_default, "gpio.2"),
- CLK(&clk_default, "gpio.3"),
- CLK(&clk_default, "rng"),
-};
-
-int __init clk_init(void)
-{
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
- return 0;
-}
diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h
deleted file mode 100644
index 78da2e7..0000000
--- a/arch/arm/mach-nomadik/clock.h
+++ /dev/null
@@ -1,15 +0,0 @@
-
-/*
- * linux/arch/arm/mach-nomadik/clock.h
- *
- * Copyright (C) 2009 Alessandro Rubini
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-struct clk {
- unsigned long rate;
-};
-
-int __init clk_init(void);
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 27f43a4..6fd8e46 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -22,6 +22,10 @@
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_data/clk-nomadik.h>
#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
@@ -32,91 +36,63 @@
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
-#include "clock.h"
#include "cpu-8815.h"
-#define __MEM_4K_RESOURCE(x) \
- .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
-
/* The 8815 has 4 GPIO blocks, let's register them immediately */
+static resource_size_t __initdata cpu8815_gpio_base[] = {
+ NOMADIK_GPIO0_BASE,
+ NOMADIK_GPIO1_BASE,
+ NOMADIK_GPIO2_BASE,
+ NOMADIK_GPIO3_BASE,
+};
-#define GPIO_RESOURCE(block) \
- { \
- .start = NOMADIK_GPIO##block##_BASE, \
- .end = NOMADIK_GPIO##block##_BASE + SZ_4K - 1, \
- .flags = IORESOURCE_MEM, \
- }, \
- { \
- .start = IRQ_GPIO##block, \
- .end = IRQ_GPIO##block, \
- .flags = IORESOURCE_IRQ, \
+static struct platform_device *
+cpu8815_add_gpio(int id, resource_size_t addr, int irq,
+ struct nmk_gpio_platform_data *pdata)
+{
+ struct resource resources[] = {
+ {
+ .start = addr,
+ .end = addr + 127,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = irq,
+ .end = irq,
+ .flags = IORESOURCE_IRQ,
+ }
+ };
+
+ return platform_device_register_resndata(NULL, "gpio", id,
+ resources, ARRAY_SIZE(resources),
+ pdata, sizeof(*pdata));
+}
+
+void cpu8815_add_gpios(resource_size_t *base, int num, int irq,
+ struct nmk_gpio_platform_data *pdata)
+{
+ int first = 0;
+ int i;
+
+ for (i = 0; i < num; i++, first += 32, irq++) {
+ pdata->first_gpio = first;
+ pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
+ pdata->num_gpio = 32;
+
+ cpu8815_add_gpio(i, base[i], irq, pdata);
}
-
-#define GPIO_DEVICE(block) \
- { \
- .name = "gpio", \
- .id = block, \
- .num_resources = 2, \
- .resource = &cpu8815_gpio_resources[block * 2], \
- .dev = { \
- .platform_data = &cpu8815_gpio[block], \
- }, \
- }
-
-static struct nmk_gpio_platform_data cpu8815_gpio[] = {
- {
- .name = "GPIO-0-31",
- .first_gpio = 0,
- .first_irq = NOMADIK_GPIO_TO_IRQ(0),
- }, {
- .name = "GPIO-32-63",
- .first_gpio = 32,
- .first_irq = NOMADIK_GPIO_TO_IRQ(32),
- }, {
- .name = "GPIO-64-95",
- .first_gpio = 64,
- .first_irq = NOMADIK_GPIO_TO_IRQ(64),
- }, {
- .name = "GPIO-96-127", /* 124..127 not routed to pin */
- .first_gpio = 96,
- .first_irq = NOMADIK_GPIO_TO_IRQ(96),
- }
-};
-
-static struct resource cpu8815_gpio_resources[] = {
- GPIO_RESOURCE(0),
- GPIO_RESOURCE(1),
- GPIO_RESOURCE(2),
- GPIO_RESOURCE(3),
-};
-
-static struct platform_device cpu8815_platform_gpio[] = {
- GPIO_DEVICE(0),
- GPIO_DEVICE(1),
- GPIO_DEVICE(2),
- GPIO_DEVICE(3),
-};
-
-static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL);
-
-static struct platform_device *platform_devs[] __initdata = {
- cpu8815_platform_gpio + 0,
- cpu8815_platform_gpio + 1,
- cpu8815_platform_gpio + 2,
- cpu8815_platform_gpio + 3,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
- &cpu8815_amba_rng_device
-};
+}
static int __init cpu8815_init(void)
{
- int i;
+ struct nmk_gpio_platform_data pdata = {
+ /* No custom data yet */
+ };
- platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
- amba_device_register(amba_devs[i], &iomem_resource);
+ cpu8815_add_gpios(cpu8815_gpio_base, ARRAY_SIZE(cpu8815_gpio_base),
+ IRQ_GPIO0, &pdata);
+ amba_apb_device_add(NULL, "rng", NOMADIK_RNG_BASE, SZ_4K, 0, 0, NULL, 0);
+ amba_apb_device_add(NULL, "rtc-pl031", NOMADIK_RTC_BASE, SZ_4K, IRQ_RTC_RTT, 0, NULL, 0);
return 0;
}
arch_initcall(cpu8815_init);
@@ -147,7 +123,7 @@
* Init clocks here so that they are available for system timer
* initialization.
*/
- clk_init();
+ nomadik_clk_init();
}
/*
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
index 0fc2f6f..6d14454 100644
--- a/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -5,6 +5,7 @@
#include <linux/i2c-gpio.h>
#include <linux/platform_device.h>
#include <plat/gpio-nomadik.h>
+#include <plat/pincfg.h>
/*
* There are two busses in the 8815NHK.
@@ -12,19 +13,27 @@
* use bit-bang through GPIO by now, to keep things simple
*/
+/* I2C0 connected to the STw4811 power management chip */
static struct i2c_gpio_platform_data nhk8815_i2c_data0 = {
/* keep defaults for timeouts; pins are push-pull bidirectional */
.scl_pin = 62,
.sda_pin = 63,
};
+/* I2C1 connected to various sensors */
static struct i2c_gpio_platform_data nhk8815_i2c_data1 = {
/* keep defaults for timeouts; pins are push-pull bidirectional */
.scl_pin = 53,
.sda_pin = 54,
};
-/* first bus: GPIO XX and YY */
+/* I2C2 connected to the USB portions of the STw4811 only */
+static struct i2c_gpio_platform_data nhk8815_i2c_data2 = {
+ /* keep defaults for timeouts; pins are push-pull bidirectional */
+ .scl_pin = 73,
+ .sda_pin = 74,
+};
+
static struct platform_device nhk8815_i2c_dev0 = {
.name = "i2c-gpio",
.id = 0,
@@ -32,7 +41,7 @@
.platform_data = &nhk8815_i2c_data0,
},
};
-/* second bus: GPIO XX and YY */
+
static struct platform_device nhk8815_i2c_dev1 = {
.name = "i2c-gpio",
.id = 1,
@@ -41,15 +50,29 @@
},
};
+static struct platform_device nhk8815_i2c_dev2 = {
+ .name = "i2c-gpio",
+ .id = 2,
+ .dev = {
+ .platform_data = &nhk8815_i2c_data2,
+ },
+};
+
+static pin_cfg_t cpu8815_pins_i2c[] = {
+ PIN_CFG_INPUT(62, GPIO, PULLUP),
+ PIN_CFG_INPUT(63, GPIO, PULLUP),
+ PIN_CFG_INPUT(53, GPIO, PULLUP),
+ PIN_CFG_INPUT(54, GPIO, PULLUP),
+ PIN_CFG_INPUT(73, GPIO, PULLUP),
+ PIN_CFG_INPUT(74, GPIO, PULLUP),
+};
+
static int __init nhk8815_i2c_init(void)
{
- nmk_gpio_set_mode(nhk8815_i2c_data0.scl_pin, NMK_GPIO_ALT_GPIO);
- nmk_gpio_set_mode(nhk8815_i2c_data0.sda_pin, NMK_GPIO_ALT_GPIO);
+ nmk_config_pins(cpu8815_pins_i2c, ARRAY_SIZE(cpu8815_pins_i2c));
platform_device_register(&nhk8815_i2c_dev0);
-
- nmk_gpio_set_mode(nhk8815_i2c_data1.scl_pin, NMK_GPIO_ALT_GPIO);
- nmk_gpio_set_mode(nhk8815_i2c_data1.sda_pin, NMK_GPIO_ALT_GPIO);
platform_device_register(&nhk8815_i2c_dev1);
+ platform_device_register(&nhk8815_i2c_dev2);
return 0;
}
@@ -58,6 +81,7 @@
{
platform_device_unregister(&nhk8815_i2c_dev0);
platform_device_unregister(&nhk8815_i2c_dev1);
+ platform_device_unregister(&nhk8815_i2c_dev2);
return;
}
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
index 8faabc5..a118e615 100644
--- a/arch/arm/mach-nomadik/include/mach/irqs.h
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -22,56 +22,56 @@
#include <mach/hardware.h>
-#define IRQ_VIC_START 0 /* first VIC interrupt is 0 */
+#define IRQ_VIC_START 1 /* first VIC interrupt is 1 */
/*
* Interrupt numbers generic for all Nomadik Chip cuts
*/
-#define IRQ_WATCHDOG 0
-#define IRQ_SOFTINT 1
-#define IRQ_CRYPTO 2
-#define IRQ_OWM 3
-#define IRQ_MTU0 4
-#define IRQ_MTU1 5
-#define IRQ_GPIO0 6
-#define IRQ_GPIO1 7
-#define IRQ_GPIO2 8
-#define IRQ_GPIO3 9
-#define IRQ_RTC_RTT 10
-#define IRQ_SSP 11
-#define IRQ_UART0 12
-#define IRQ_DMA1 13
-#define IRQ_CLCD_MDIF 14
-#define IRQ_DMA0 15
-#define IRQ_PWRFAIL 16
-#define IRQ_UART1 17
-#define IRQ_FIRDA 18
-#define IRQ_MSP0 19
-#define IRQ_I2C0 20
-#define IRQ_I2C1 21
-#define IRQ_SDMMC 22
-#define IRQ_USBOTG 23
-#define IRQ_SVA_IT0 24
-#define IRQ_SVA_IT1 25
-#define IRQ_SAA_IT0 26
-#define IRQ_SAA_IT1 27
-#define IRQ_UART2 28
-#define IRQ_MSP2 31
-#define IRQ_L2CC 48
-#define IRQ_HPI 49
-#define IRQ_SKE 50
-#define IRQ_KP 51
-#define IRQ_MEMST 54
-#define IRQ_SGA_IT 58
-#define IRQ_USBM 60
-#define IRQ_MSP1 62
+#define IRQ_WATCHDOG 1
+#define IRQ_SOFTINT 2
+#define IRQ_CRYPTO 3
+#define IRQ_OWM 4
+#define IRQ_MTU0 5
+#define IRQ_MTU1 6
+#define IRQ_GPIO0 7
+#define IRQ_GPIO1 8
+#define IRQ_GPIO2 9
+#define IRQ_GPIO3 10
+#define IRQ_RTC_RTT 11
+#define IRQ_SSP 12
+#define IRQ_UART0 13
+#define IRQ_DMA1 14
+#define IRQ_CLCD_MDIF 15
+#define IRQ_DMA0 16
+#define IRQ_PWRFAIL 17
+#define IRQ_UART1 18
+#define IRQ_FIRDA 19
+#define IRQ_MSP0 20
+#define IRQ_I2C0 21
+#define IRQ_I2C1 22
+#define IRQ_SDMMC 23
+#define IRQ_USBOTG 24
+#define IRQ_SVA_IT0 25
+#define IRQ_SVA_IT1 26
+#define IRQ_SAA_IT0 27
+#define IRQ_SAA_IT1 28
+#define IRQ_UART2 29
+#define IRQ_MSP2 30
+#define IRQ_L2CC 49
+#define IRQ_HPI 50
+#define IRQ_SKE 51
+#define IRQ_KP 52
+#define IRQ_MEMST 55
+#define IRQ_SGA_IT 59
+#define IRQ_USBM 61
+#define IRQ_MSP1 63
-#define NOMADIK_SOC_NR_IRQS 64
+#define NOMADIK_GPIO_OFFSET (IRQ_VIC_START+64)
/* After chip-specific IRQ numbers we have the GPIO ones */
#define NOMADIK_NR_GPIO 128 /* last 4 not wired to pins */
-#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_SOC_NR_IRQS)
-#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_SOC_NR_IRQS)
+#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_GPIO_OFFSET)
+#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_GPIO_OFFSET)
#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
/* Following two are used by entry_macro.S, to access our dual-vic */
@@ -79,4 +79,3 @@
#define VIC_REG_IRQSR1 0x20
#endif /* __ASM_ARCH_IRQS_H */
-
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index f2f8a58..c534698 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -37,12 +37,12 @@
#include <plat/board-ams-delta.h>
#include <plat/keypad.h>
#include <plat/mux.h>
-#include <plat/usb.h>
#include <plat/board.h>
#include <mach/hardware.h>
#include <mach/ams-delta-fiq.h>
#include <mach/camera.h>
+#include <mach/usb.h>
#include "iomap.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index e75e2d5..6ec385e 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -23,8 +23,10 @@
#include <asm/mach/map.h>
#include <plat/mux.h>
-#include <plat/usb.h>
#include <plat/board.h>
+
+#include <mach/usb.h>
+
#include "common.h"
/* assume no Mini-AB port */
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index a28e989..44a4ab1 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -40,11 +40,11 @@
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/irda.h>
-#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/flash.h>
#include <mach/hardware.h>
+#include <mach/usb.h>
#include "common.h"
#include "board-h2.h"
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 108a864..86cb5a0 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -40,13 +40,13 @@
#include <plat/mux.h>
#include <plat/tc.h>
-#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/dma.h>
#include <plat/flash.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
+#include <mach/usb.h>
#include "common.h"
#include "board-h3.h"
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 118a9d4..b3f6e94 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -44,10 +44,10 @@
#include <plat/omap7xx.h>
#include <plat/board.h>
#include <plat/keypad.h>
-#include <plat/usb.h>
#include <plat/mmc.h>
#include <mach/irqs.h>
+#include <mach/usb.h>
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 7970223..f21c296 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -35,11 +35,11 @@
#include <plat/flash.h>
#include <plat/fpga.h>
#include <plat/tc.h>
-#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/mmc.h>
#include <mach/hardware.h>
+#include <mach/usb.h>
#include "iomap.h"
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 7212ae9..4007a37 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -26,7 +26,6 @@
#include <asm/mach/map.h>
#include <plat/mux.h>
-#include <plat/usb.h>
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/lcd_mipid.h>
@@ -34,6 +33,7 @@
#include <plat/clock.h>
#include <mach/hardware.h>
+#include <mach/usb.h>
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index da8d872..8784705 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -45,11 +45,11 @@
#include <asm/mach/map.h>
#include <plat/flash.h>
-#include <plat/usb.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <mach/hardware.h>
+#include <mach/usb.h>
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 949b62a..26bcb9d 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -35,7 +35,6 @@
#include <plat/flash.h>
#include <plat/mux.h>
-#include <plat/usb.h>
#include <plat/tc.h>
#include <plat/dma.h>
#include <plat/board.h>
@@ -43,6 +42,7 @@
#include <plat/keypad.h>
#include <mach/hardware.h>
+#include <mach/usb.h>
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 7f1e1cf..4d09944 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -35,7 +35,6 @@
#include <plat/led.h>
#include <plat/flash.h>
#include <plat/mux.h>
-#include <plat/usb.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/board.h>
@@ -43,6 +42,7 @@
#include <plat/keypad.h>
#include <mach/hardware.h>
+#include <mach/usb.h>
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 3c71c6b..cc71a26 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -37,7 +37,6 @@
#include <plat/flash.h>
#include <plat/mux.h>
-#include <plat/usb.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/board.h>
@@ -45,6 +44,7 @@
#include <plat/keypad.h>
#include <mach/hardware.h>
+#include <mach/usb.h>
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 3b7b82b..8c665bd 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -37,13 +37,13 @@
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/irda.h>
-#include <plat/usb.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/board-sx1.h>
#include <mach/hardware.h>
+#include <mach/usb.h>
#include "common.h"
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index afd67f0..3497769 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -35,9 +35,10 @@
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/tc.h>
-#include <plat/usb.h>
+#include <plat/board.h>
#include <mach/hardware.h>
+#include <mach/usb.h>
#include "common.h"
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index c6ce93f..c007d80 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -25,10 +25,11 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/clkdev_omap.h>
+#include <plat/board.h>
#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
-#include <plat/usb.h> /* for OTG_BASE */
#include <mach/hardware.h>
+#include <mach/usb.h> /* for OTG_BASE */
#include "iomap.h"
#include "clock.h"
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h
new file mode 100644
index 0000000..753cd5c
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/usb.h
@@ -0,0 +1,165 @@
+/*
+ * FIXME correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#ifdef CONFIG_USB_GADGET_OMAP
+#define is_usb0_device(config) 1
+#else
+#define is_usb0_device(config) 0
+#endif
+
+struct omap_usb_config {
+ /* Configure drivers according to the connectors on your board:
+ * - "A" connector (rectagular)
+ * ... for host/OHCI use, set "register_host".
+ * - "B" connector (squarish) or "Mini-B"
+ * ... for device/gadget use, set "register_dev".
+ * - "Mini-AB" connector (very similar to Mini-B)
+ * ... for OTG use as device OR host, initialize "otg"
+ */
+ unsigned register_host:1;
+ unsigned register_dev:1;
+ u8 otg; /* port number, 1-based: usb1 == 2 */
+
+ u8 hmc_mode;
+
+ /* implicitly true if otg: host supports remote wakeup? */
+ u8 rwc;
+
+ /* signaling pins used to talk to transceiver on usbN:
+ * 0 == usbN unused
+ * 2 == usb0-only, using internal transceiver
+ * 3 == 3 wire bidirectional
+ * 4 == 4 wire bidirectional
+ * 6 == 6 wire unidirectional (or TLL)
+ */
+ u8 pins[3];
+
+ struct platform_device *udc_device;
+ struct platform_device *ohci_device;
+ struct platform_device *otg_device;
+
+ u32 (*usb0_init)(unsigned nwires, unsigned is_device);
+ u32 (*usb1_init)(unsigned nwires);
+ u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
+
+ int (*ocpi_enable)(void);
+};
+
+void omap_otg_init(struct omap_usb_config *config);
+
+#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#define OMAP1_OTG_BASE 0xfffb0400
+#define OMAP1_UDC_BASE 0xfffb4000
+#define OMAP1_OHCI_BASE 0xfffba000
+
+#define OMAP2_OHCI_BASE 0x4805e000
+#define OMAP2_UDC_BASE 0x4805e200
+#define OMAP2_OTG_BASE 0x4805e300
+#define OTG_BASE OMAP1_OTG_BASE
+#define UDC_BASE OMAP1_UDC_BASE
+#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
+
+/*
+ * OTG and transceiver registers, for OMAPs starting with ARM926
+ */
+#define OTG_REV (OTG_BASE + 0x00)
+#define OTG_SYSCON_1 (OTG_BASE + 0x04)
+# define USB2_TRX_MODE(w) (((w)>>24)&0x07)
+# define USB1_TRX_MODE(w) (((w)>>20)&0x07)
+# define USB0_TRX_MODE(w) (((w)>>16)&0x07)
+# define OTG_IDLE_EN (1 << 15)
+# define HST_IDLE_EN (1 << 14)
+# define DEV_IDLE_EN (1 << 13)
+# define OTG_RESET_DONE (1 << 2)
+# define OTG_SOFT_RESET (1 << 1)
+#define OTG_SYSCON_2 (OTG_BASE + 0x08)
+# define OTG_EN (1 << 31)
+# define USBX_SYNCHRO (1 << 30)
+# define OTG_MST16 (1 << 29)
+# define SRP_GPDATA (1 << 28)
+# define SRP_GPDVBUS (1 << 27)
+# define SRP_GPUVBUS(w) (((w)>>24)&0x07)
+# define A_WAIT_VRISE(w) (((w)>>20)&0x07)
+# define B_ASE_BRST(w) (((w)>>16)&0x07)
+# define SRP_DPW (1 << 14)
+# define SRP_DATA (1 << 13)
+# define SRP_VBUS (1 << 12)
+# define OTG_PADEN (1 << 10)
+# define HMC_PADEN (1 << 9)
+# define UHOST_EN (1 << 8)
+# define HMC_TLLSPEED (1 << 7)
+# define HMC_TLLATTACH (1 << 6)
+# define OTG_HMC(w) (((w)>>0)&0x3f)
+#define OTG_CTRL (OTG_BASE + 0x0c)
+# define OTG_USB2_EN (1 << 29)
+# define OTG_USB2_DP (1 << 28)
+# define OTG_USB2_DM (1 << 27)
+# define OTG_USB1_EN (1 << 26)
+# define OTG_USB1_DP (1 << 25)
+# define OTG_USB1_DM (1 << 24)
+# define OTG_USB0_EN (1 << 23)
+# define OTG_USB0_DP (1 << 22)
+# define OTG_USB0_DM (1 << 21)
+# define OTG_ASESSVLD (1 << 20)
+# define OTG_BSESSEND (1 << 19)
+# define OTG_BSESSVLD (1 << 18)
+# define OTG_VBUSVLD (1 << 17)
+# define OTG_ID (1 << 16)
+# define OTG_DRIVER_SEL (1 << 15)
+# define OTG_A_SETB_HNPEN (1 << 12)
+# define OTG_A_BUSREQ (1 << 11)
+# define OTG_B_HNPEN (1 << 9)
+# define OTG_B_BUSREQ (1 << 8)
+# define OTG_BUSDROP (1 << 7)
+# define OTG_PULLDOWN (1 << 5)
+# define OTG_PULLUP (1 << 4)
+# define OTG_DRV_VBUS (1 << 3)
+# define OTG_PD_VBUS (1 << 2)
+# define OTG_PU_VBUS (1 << 1)
+# define OTG_PU_ID (1 << 0)
+#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */
+# define DRIVER_SWITCH (1 << 15)
+# define A_VBUS_ERR (1 << 13)
+# define A_REQ_TMROUT (1 << 12)
+# define A_SRP_DETECT (1 << 11)
+# define B_HNP_FAIL (1 << 10)
+# define B_SRP_TMROUT (1 << 9)
+# define B_SRP_DONE (1 << 8)
+# define B_SRP_STARTED (1 << 7)
+# define OPRT_CHG (1 << 0)
+#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */
+ // same bits as in IRQ_EN
+#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */
+# define OTGVPD (1 << 14)
+# define OTGVPU (1 << 13)
+# define OTGPUID (1 << 12)
+# define USB2VDR (1 << 10)
+# define USB2PDEN (1 << 9)
+# define USB2PUEN (1 << 8)
+# define USB1VDR (1 << 6)
+# define USB1PDEN (1 << 5)
+# define USB1PUEN (1 << 4)
+# define USB0VDR (1 << 2)
+# define USB0PDEN (1 << 1)
+# define USB0PUEN (1 << 0)
+#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */
+#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */
+
+/*-------------------------------------------------------------------------*/
+
+/* OMAP1 */
+#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064)
+# define CONF_USB2_UNI_R (1 << 8)
+# define CONF_USB1_UNI_R (1 << 7)
+# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7)
+# define CONF_USB0_ISOLATE_R (1 << 3)
+# define CONF_USB_PWRDN_DM_R (1 << 2)
+# define CONF_USB_PWRDN_DP_R (1 << 1)
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index 64c65bc..aa81593 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -140,7 +140,8 @@
}
pdata->set_timer_src = omap1_dm_timer_set_src;
- pdata->needs_manual_reset = 1;
+ pdata->timer_capability = OMAP_TIMER_ALWON |
+ OMAP_TIMER_NEEDS_RESET;
ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
if (ret) {
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index e61afd9..65f8817 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -27,7 +27,8 @@
#include <asm/irq.h>
#include <plat/mux.h>
-#include <plat/usb.h>
+
+#include <mach/usb.h>
#include "common.h"
@@ -55,6 +56,119 @@
#define INT_USB_IRQ_HGEN INT_USB_HHC_1
#define INT_USB_IRQ_OTG IH2_BASE + 8
+#ifdef CONFIG_ARCH_OMAP_OTG
+
+void __init
+omap_otg_init(struct omap_usb_config *config)
+{
+ u32 syscon;
+ int alt_pingroup = 0;
+
+ /* NOTE: no bus or clock setup (yet?) */
+
+ syscon = omap_readl(OTG_SYSCON_1) & 0xffff;
+ if (!(syscon & OTG_RESET_DONE))
+ pr_debug("USB resets not complete?\n");
+
+ //omap_writew(0, OTG_IRQ_EN);
+
+ /* pin muxing and transceiver pinouts */
+ if (config->pins[0] > 2) /* alt pingroup 2 */
+ alt_pingroup = 1;
+ syscon |= config->usb0_init(config->pins[0], is_usb0_device(config));
+ syscon |= config->usb1_init(config->pins[1]);
+ syscon |= config->usb2_init(config->pins[2], alt_pingroup);
+ pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
+ omap_writel(syscon, OTG_SYSCON_1);
+
+ syscon = config->hmc_mode;
+ syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
+#ifdef CONFIG_USB_OTG
+ if (config->otg)
+ syscon |= OTG_EN;
+#endif
+ if (cpu_class_is_omap1())
+ pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
+ omap_readl(USB_TRANSCEIVER_CTRL));
+ pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
+ omap_writel(syscon, OTG_SYSCON_2);
+
+ printk("USB: hmc %d", config->hmc_mode);
+ if (!alt_pingroup)
+ printk(", usb2 alt %d wires", config->pins[2]);
+ else if (config->pins[0])
+ printk(", usb0 %d wires%s", config->pins[0],
+ is_usb0_device(config) ? " (dev)" : "");
+ if (config->pins[1])
+ printk(", usb1 %d wires", config->pins[1]);
+ if (!alt_pingroup && config->pins[2])
+ printk(", usb2 %d wires", config->pins[2]);
+ if (config->otg)
+ printk(", Mini-AB on usb%d", config->otg - 1);
+ printk("\n");
+
+ if (cpu_class_is_omap1()) {
+ u16 w;
+
+ /* leave USB clocks/controllers off until needed */
+ w = omap_readw(ULPD_SOFT_REQ);
+ w &= ~SOFT_USB_CLK_REQ;
+ omap_writew(w, ULPD_SOFT_REQ);
+
+ w = omap_readw(ULPD_CLOCK_CTRL);
+ w &= ~USB_MCLK_EN;
+ w |= DIS_USB_PVCI_CLK;
+ omap_writew(w, ULPD_CLOCK_CTRL);
+ }
+ syscon = omap_readl(OTG_SYSCON_1);
+ syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
+
+#ifdef CONFIG_USB_GADGET_OMAP
+ if (config->otg || config->register_dev) {
+ struct platform_device *udc_device = config->udc_device;
+ int status;
+
+ syscon &= ~DEV_IDLE_EN;
+ udc_device->dev.platform_data = config;
+ status = platform_device_register(udc_device);
+ if (status)
+ pr_debug("can't register UDC device, %d\n", status);
+ }
+#endif
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ if (config->otg || config->register_host) {
+ struct platform_device *ohci_device = config->ohci_device;
+ int status;
+
+ syscon &= ~HST_IDLE_EN;
+ ohci_device->dev.platform_data = config;
+ status = platform_device_register(ohci_device);
+ if (status)
+ pr_debug("can't register OHCI device, %d\n", status);
+ }
+#endif
+
+#ifdef CONFIG_USB_OTG
+ if (config->otg) {
+ struct platform_device *otg_device = config->otg_device;
+ int status;
+
+ syscon &= ~OTG_IDLE_EN;
+ otg_device->dev.platform_data = config;
+ status = platform_device_register(otg_device);
+ if (status)
+ pr_debug("can't register OTG device, %d\n", status);
+ }
+#endif
+ pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
+ omap_writel(syscon, OTG_SYSCON_1);
+}
+
+#else
+void omap_otg_init(struct omap_usb_config *config) {}
+#endif
+
#ifdef CONFIG_USB_GADGET_OMAP
static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 4cf5142..dd0fbf7 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -9,7 +9,7 @@
select REGULATOR
select PM_RUNTIME
select VFP
- select NEON if ARCH_OMAP3 || ARCH_OMAP4
+ select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
select SERIAL_OMAP
select SERIAL_OMAP_CONSOLE
select I2C
@@ -21,12 +21,16 @@
help
Compile a kernel suitable for booting most boards
+config SOC_HAS_OMAP2_SDRC
+ bool "OMAP2 SDRAM Controller support"
+
config ARCH_OMAP2
bool "TI OMAP2"
depends on ARCH_OMAP2PLUS
default y
select CPU_V6
select MULTI_IRQ_HANDLER
+ select SOC_HAS_OMAP2_SDRC
config ARCH_OMAP3
bool "TI OMAP3"
@@ -35,9 +39,11 @@
select CPU_V7
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARCH_HAS_OPP
+ select PM_RUNTIME if CPU_IDLE
select PM_OPP if PM
select ARM_CPU_SUSPEND if PM
select MULTI_IRQ_HANDLER
+ select SOC_HAS_OMAP2_SDRC
config ARCH_OMAP4
bool "TI OMAP4"
@@ -52,10 +58,17 @@
select PL310_ERRATA_727915
select ARM_ERRATA_720789
select ARCH_HAS_OPP
+ select PM_RUNTIME if CPU_IDLE
select PM_OPP if PM
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARM_CPU_SUSPEND if PM
+config SOC_OMAP5
+ bool "TI OMAP5"
+ select CPU_V7
+ select ARM_GIC
+ select HAVE_SMP
+
comment "OMAP Core Type"
depends on ARCH_OMAP2
@@ -64,19 +77,19 @@
depends on ARCH_OMAP2
default y
select OMAP_DM_TIMER
- select ARCH_OMAP_OTG
+ select SOC_HAS_OMAP2_SDRC
config SOC_OMAP2430
bool "OMAP2430 support"
depends on ARCH_OMAP2
default y
- select ARCH_OMAP_OTG
+ select SOC_HAS_OMAP2_SDRC
config SOC_OMAP3430
bool "OMAP3430 support"
depends on ARCH_OMAP3
default y
- select ARCH_OMAP_OTG
+ select SOC_HAS_OMAP2_SDRC
config SOC_TI81XX
bool "TI81XX support"
@@ -85,8 +98,10 @@
config SOC_AM33XX
bool "AM33XX support"
- depends on ARCH_OMAP3
default y
+ select CPU_V7
+ select ARM_CPU_SUSPEND if PM
+ select MULTI_IRQ_HANDLER
config OMAP_PACKAGE_ZAF
bool
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index fa742f3..f6a24b3 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -6,7 +6,7 @@
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o
-omap-2-3-common = irq.o sdrc.o
+omap-2-3-common = irq.o
hwmod-common = omap_hwmod.o \
omap_hwmod_common_data.o
clock-common = clock.o clock_common_data.o \
@@ -16,19 +16,24 @@
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
+obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common)
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
obj-y += mcbsp.o
endif
obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
+obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
# SMP support ONLY available for OMAP4
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
-obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o
-obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o
+omap-4-5-common = omap4-common.o omap-wakeupgen.o \
+ sleep44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common)
+obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common)
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
@@ -66,12 +71,12 @@
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
-obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
-obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
+obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
-obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
-obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o
+
+obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
+obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
@@ -82,14 +87,22 @@
endif
+ifeq ($(CONFIG_CPU_IDLE),y)
+obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
+obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
+endif
+
# PRCM
+omap-prcm-4-5-common = prcm.o cminst44xx.o cm44xx.o \
+ prcm_mpu44xx.o prminst44xx.o \
+ vc44xx_data.o vp44xx_data.o
obj-y += prm_common.o
obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += prcm.o cminst44xx.o cm44xx.o
-obj-$(CONFIG_ARCH_OMAP4) += prcm_mpu44xx.o prminst44xx.o
-obj-$(CONFIG_ARCH_OMAP4) += vc44xx_data.o vp44xx_data.o prm44xx.o
+obj-$(CONFIG_SOC_AM33XX) += prcm.o prm33xx.o cm33xx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) prm44xx.o
+obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common)
# OMAP voltage domains
voltagedomain-common := voltage.o vc.o vp.o
@@ -99,6 +112,9 @@
obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
+obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common)
+obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
+obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common)
# OMAP powerdomain framework
powerdomain-common += powerdomain.o powerdomain-common.o
@@ -113,10 +129,14 @@
obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o
obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o
+obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common)
+obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o
+obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common)
+obj-$(CONFIG_SOC_OMAP5) += powerdomain44xx.o
# PRCM clockdomain control
clockdomain-common += clockdomain.o
-clockdomain-common += clockdomains_common_data.o
obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP2) += clockdomain2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o
@@ -129,6 +149,11 @@
obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o
obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o
+obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common)
+obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o
+obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common)
+obj-$(CONFIG_SOC_OMAP5) += clockdomain44xx.o
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
@@ -146,6 +171,10 @@
obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM33XX) += clock33xx_data.o
+obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
+obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o
# OMAP2 clock rate set data (old "OPP" data)
obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
@@ -173,6 +202,7 @@
# L3 interconnect
obj-$(CONFIG_ARCH_OMAP3) += omap_l3_smx.o
obj-$(CONFIG_ARCH_OMAP4) += omap_l3_noc.o
+obj-$(CONFIG_SOC_OMAP5) += omap_l3_noc.o
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
mailbox_mach-objs := mailbox.o
@@ -189,6 +219,10 @@
# OMAP2420 MSDI controller integration support ("MMC")
obj-$(CONFIG_SOC_OMAP2420) += msdi.o
+ifneq ($(CONFIG_DRM_OMAP),)
+obj-y += drm.o
+endif
+
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
@@ -244,9 +278,6 @@
omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o
obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y)
-
-usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o
-obj-y += $(usbfs-m) $(usbfs-y)
obj-y += usb-musb.o
obj-y += omap_phy_internal.o
diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c
index 447682c..2c90ac6 100644
--- a/arch/arm/mach-omap2/am35xx-emac.c
+++ b/arch/arm/mach-omap2/am35xx-emac.c
@@ -15,27 +15,13 @@
* General Public License for more details.
*/
-#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/davinci_emac.h>
-#include <linux/platform_device.h>
-#include <plat/irqs.h>
+#include <asm/system.h>
+#include <plat/omap_device.h>
#include <mach/am35xx.h>
-
#include "control.h"
-
-static struct mdio_platform_data am35xx_emac_mdio_pdata;
-
-static struct resource am35xx_emac_mdio_resources[] = {
- DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET, SZ_4K),
-};
-
-static struct platform_device am35xx_emac_mdio_device = {
- .name = "davinci_mdio",
- .id = 0,
- .num_resources = ARRAY_SIZE(am35xx_emac_mdio_resources),
- .resource = am35xx_emac_mdio_resources,
- .dev.platform_data = &am35xx_emac_mdio_pdata,
-};
+#include "am35xx-emac.h"
static void am35xx_enable_emac_int(void)
{
@@ -69,41 +55,57 @@
.interrupt_disable = am35xx_disable_emac_int,
};
-static struct resource am35xx_emac_resources[] = {
- DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE, 0x30000),
- DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RXTHRESH_IRQ),
- DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RX_PULSE_IRQ),
- DEFINE_RES_IRQ(INT_35XX_EMAC_C0_TX_PULSE_IRQ),
- DEFINE_RES_IRQ(INT_35XX_EMAC_C0_MISC_PULSE_IRQ),
-};
+static struct mdio_platform_data am35xx_mdio_pdata;
-static struct platform_device am35xx_emac_device = {
- .name = "davinci_emac",
- .id = -1,
- .num_resources = ARRAY_SIZE(am35xx_emac_resources),
- .resource = am35xx_emac_resources,
- .dev = {
- .platform_data = &am35xx_emac_pdata,
- },
-};
+static int __init omap_davinci_emac_dev_init(struct omap_hwmod *oh,
+ void *pdata, int pdata_len)
+{
+ struct platform_device *pdev;
+
+ pdev = omap_device_build(oh->class->name, 0, oh, pdata, pdata_len,
+ NULL, 0, false);
+ if (IS_ERR(pdev)) {
+ WARN(1, "Can't build omap_device for %s:%s.\n",
+ oh->class->name, oh->name);
+ return PTR_ERR(pdev);
+ }
+
+ return 0;
+}
void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en)
{
+ struct omap_hwmod *oh;
u32 v;
- int err;
+ int ret;
- am35xx_emac_pdata.rmii_en = rmii_en;
- am35xx_emac_mdio_pdata.bus_freq = mdio_bus_freq;
- err = platform_device_register(&am35xx_emac_device);
- if (err) {
- pr_err("AM35x: failed registering EMAC device: %d\n", err);
+ oh = omap_hwmod_lookup("davinci_mdio");
+ if (!oh) {
+ pr_err("Could not find davinci_mdio hwmod\n");
return;
}
- err = platform_device_register(&am35xx_emac_mdio_device);
- if (err) {
- pr_err("AM35x: failed registering EMAC MDIO device: %d\n", err);
- platform_device_unregister(&am35xx_emac_device);
+ am35xx_mdio_pdata.bus_freq = mdio_bus_freq;
+
+ ret = omap_davinci_emac_dev_init(oh, &am35xx_mdio_pdata,
+ sizeof(am35xx_mdio_pdata));
+ if (ret) {
+ pr_err("Could not build davinci_mdio hwmod device\n");
+ return;
+ }
+
+ oh = omap_hwmod_lookup("davinci_emac");
+ if (!oh) {
+ pr_err("Could not find davinci_emac hwmod\n");
+ return;
+ }
+
+ am35xx_emac_pdata.rmii_en = rmii_en;
+
+ ret = omap_davinci_emac_dev_init(oh, &am35xx_emac_pdata,
+ sizeof(am35xx_emac_pdata));
+ if (ret) {
+ pr_err("Could not build davinci_emac hwmod device\n");
return;
}
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 99ca6ba..9511584 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -218,9 +218,6 @@
};
static struct twl4030_platform_data sdp2430_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
.gpio = &sdp2430_gpio_data,
.vmmc1 = &sdp2430_vmmc1,
@@ -254,16 +251,6 @@
{} /* Terminator */
};
-static struct omap_usb_config sdp2430_usb_config __initdata = {
- .otg = 1,
-#ifdef CONFIG_USB_GADGET_OMAP
- .hmc_mode = 0x0,
-#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- .hmc_mode = 0x1,
-#endif
- .pins[0] = 3,
-};
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -280,7 +267,6 @@
omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap_hsmmc_init(mmc);
- omap2_usbfs_init(&sdp2430_usb_config);
omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
usb_musb_init(NULL);
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 8e17284..ad8a7d9 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -821,6 +821,9 @@
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+ /* NIRQ2 for twl6040 */
+ OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
+ OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 502c31e..519bcd3 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -35,7 +35,6 @@
#include <asm/mach/flash.h>
#include <plat/led.h>
-#include <plat/usb.h>
#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
@@ -253,13 +252,6 @@
clk_put(gpmc_fck);
}
-static struct omap_usb_config apollon_usb_config __initdata = {
- .register_dev = 1,
- .hmc_mode = 0x14, /* 0:dev 1:host1 2:disable */
-
- .pins[0] = 6,
-};
-
static struct panel_generic_dpi_data apollon_panel_data = {
.name = "apollon",
};
@@ -297,15 +289,6 @@
gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds));
}
-static void __init apollon_usb_init(void)
-{
- /* USB device */
- /* DEVICE_SUSPEND */
- omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
- gpio_request_one(12, GPIOF_OUT_INIT_LOW, "USB suspend");
- omap2_usbfs_init(&apollon_usb_config);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -321,7 +304,6 @@
apollon_init_smc91x();
apollon_led_init();
apollon_flash_init();
- apollon_usb_init();
/* REVISIT: where's the correct place */
omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP);
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index ded100c..97d7190 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -490,6 +490,71 @@
.power = &cm_t35_power_data,
};
+#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+#include <media/omap3isp.h>
+#include "devices.h"
+
+static struct i2c_board_info cm_t35_isp_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("mt9t001", 0x5d),
+ },
+ {
+ I2C_BOARD_INFO("tvp5150", 0x5c),
+ },
+};
+
+static struct isp_subdev_i2c_board_info cm_t35_isp_primary_subdevs[] = {
+ {
+ .board_info = &cm_t35_isp_i2c_boardinfo[0],
+ .i2c_adapter_id = 3,
+ },
+ { NULL, 0, },
+};
+
+static struct isp_subdev_i2c_board_info cm_t35_isp_secondary_subdevs[] = {
+ {
+ .board_info = &cm_t35_isp_i2c_boardinfo[1],
+ .i2c_adapter_id = 3,
+ },
+ { NULL, 0, },
+};
+
+static struct isp_v4l2_subdevs_group cm_t35_isp_subdevs[] = {
+ {
+ .subdevs = cm_t35_isp_primary_subdevs,
+ .interface = ISP_INTERFACE_PARALLEL,
+ .bus = {
+ .parallel = {
+ .clk_pol = 1,
+ },
+ },
+ },
+ {
+ .subdevs = cm_t35_isp_secondary_subdevs,
+ .interface = ISP_INTERFACE_PARALLEL,
+ .bus = {
+ .parallel = {
+ .clk_pol = 0,
+ },
+ },
+ },
+ { NULL, 0, },
+};
+
+static struct isp_platform_data cm_t35_isp_pdata = {
+ .subdevs = cm_t35_isp_subdevs,
+};
+
+static void __init cm_t35_init_camera(void)
+{
+ if (omap3_init_camera(&cm_t35_isp_pdata) < 0)
+ pr_warn("CM-T3x: Failed registering camera device!\n");
+}
+
+#else
+static inline void cm_t35_init_camera(void) {}
+#endif /* CONFIG_VIDEO_OMAP3 */
+
static void __init cm_t35_init_i2c(void)
{
omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
@@ -497,6 +562,8 @@
TWL_COMMON_PDATA_AUDIO);
omap3_pmic_init("tps65930", &cm_t35_twldata);
+
+ omap_register_i2c_bus(3, 400, NULL, 0);
}
#ifdef CONFIG_OMAP_MUX
@@ -574,6 +641,27 @@
OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ /* Camera */
+ OMAP3_MUX(CAM_HS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_VS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_FLD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D8, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP3_MUX(CAM_D9, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP3_MUX(CAM_STROBE, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+ OMAP3_MUX(CAM_D10, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP3_MUX(CAM_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
+
/* display controls */
OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
@@ -646,6 +734,7 @@
usb_musb_init(NULL);
cm_t35_init_usbh();
+ cm_t35_init_camera();
}
static void __init cm_t35_init(void)
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 70a81f9..53c39d2 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -97,11 +97,6 @@
gpmc_onenand_init(&board_onenand_data);
}
-#else
-void
-__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
-{
-}
#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
#if defined(CONFIG_MTD_NAND_OMAP2) || \
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 2029346..6f93a20 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -25,23 +25,12 @@
#include "common-board-devices.h"
#if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
-#define omap_intc_of_init NULL
+#define intc_of_init NULL
#endif
#ifndef CONFIG_ARCH_OMAP4
#define gic_of_init NULL
#endif
-static struct of_device_id irq_match[] __initdata = {
- { .compatible = "ti,omap2-intc", .data = omap_intc_of_init, },
- { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
- { }
-};
-
-static void __init omap_init_irq(void)
-{
- of_irq_init(irq_match);
-}
-
static struct of_device_id omap_dt_match_table[] __initdata = {
{ .compatible = "simple-bus", },
{ .compatible = "ti,omap-infra", },
@@ -65,7 +54,7 @@
.reserve = omap_reserve,
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap_intc_of_init,
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_generic_init,
.timer = &omap2_timer,
@@ -84,7 +73,7 @@
.reserve = omap_reserve,
.map_io = omap243x_map_io,
.init_early = omap2430_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap_intc_of_init,
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_generic_init,
.timer = &omap2_timer,
@@ -103,7 +92,7 @@
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
.timer = &omap3_timer,
@@ -112,6 +101,24 @@
MACHINE_END
#endif
+#ifdef CONFIG_SOC_AM33XX
+static const char *am33xx_boards_compat[] __initdata = {
+ "ti,am33xx",
+ NULL,
+};
+
+DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)")
+ .reserve = omap_reserve,
+ .map_io = am33xx_map_io,
+ .init_early = am33xx_init_early,
+ .init_irq = omap_intc_of_init,
+ .handle_irq = omap3_intc_handle_irq,
+ .init_machine = omap_generic_init,
+ .timer = &omap3_am33xx_timer,
+ .dt_compat = am33xx_boards_compat,
+MACHINE_END
+#endif
+
#ifdef CONFIG_ARCH_OMAP4
static const char *omap4_boards_compat[] __initdata = {
"ti,omap4",
@@ -122,7 +129,7 @@
.reserve = omap_reserve,
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap_gic_of_init,
.handle_irq = gic_handle_irq,
.init_machine = omap_generic_init,
.init_late = omap4430_init_late,
@@ -131,3 +138,22 @@
.restart = omap_prcm_restart,
MACHINE_END
#endif
+
+#ifdef CONFIG_SOC_OMAP5
+static const char *omap5_boards_compat[] __initdata = {
+ "ti,omap5",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
+ .reserve = omap_reserve,
+ .map_io = omap5_map_io,
+ .init_early = omap5_init_early,
+ .init_irq = omap_gic_of_init,
+ .handle_irq = gic_handle_irq,
+ .init_machine = omap_generic_init,
+ .timer = &omap5_timer,
+ .dt_compat = omap5_boards_compat,
+ .restart = omap_prcm_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 876becf..ace2048 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -32,7 +32,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/usb.h>
#include <plat/board.h>
#include "common.h"
#include <plat/menelaus.h>
@@ -329,17 +328,6 @@
h4_flash_resource.end = base + SZ_64M - 1;
}
-static struct omap_usb_config h4_usb_config __initdata = {
- /* S1.10 OFF -- usb "download port"
- * usb0 switched to Mini-B port and isp1105 transceiver;
- * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging
- */
- .register_dev = 1,
- .pins[0] = 3,
-/* .hmc_mode = 0x14,*/ /* 0:dev 1:host 2:disable */
- .hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */
-};
-
static struct at24_platform_data m24c01 = {
.byte_len = SZ_1K / 8,
.page_size = 16,
@@ -381,7 +369,6 @@
ARRAY_SIZE(h4_i2c_board_info));
platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
- omap2_usbfs_init(&h4_usb_config);
omap_serial_init();
omap_sdrc_init(NULL, NULL);
h4_init_flash();
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 8ca14e8..2c5d0ed 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -83,11 +83,9 @@
};
static struct musb_hdrc_platform_data tusb_data = {
-#if defined(CONFIG_USB_MUSB_OTG)
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
- .mode = MUSB_PERIPHERAL,
-#else /* defined(CONFIG_USB_MUSB_HOST) */
+#else
.mode = MUSB_HOST,
#endif
.set_power = tusb_set_power,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 79c6909..6202fc7 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -81,13 +81,13 @@
static struct {
int mmc1_gpio_wp;
int usb_pwr_level;
- int reset_gpio;
+ int dvi_pd_gpio;
int usr_button_gpio;
int mmc_caps;
} beagle_config = {
.mmc1_gpio_wp = -EINVAL,
.usb_pwr_level = GPIOF_OUT_INIT_LOW,
- .reset_gpio = 129,
+ .dvi_pd_gpio = -EINVAL,
.usr_button_gpio = 4,
.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
};
@@ -126,21 +126,21 @@
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
beagle_config.mmc1_gpio_wp = 29;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 6:
printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
beagle_config.mmc1_gpio_wp = 23;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 5:
printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
beagle_config.mmc1_gpio_wp = 23;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 0:
@@ -274,11 +274,9 @@
if (r)
pr_err("%s: unable to configure nDVI_PWR_EN\n",
__func__);
- r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
- "DVI_LDO_EN");
- if (r)
- pr_err("%s: unable to configure DVI_LDO_EN\n",
- __func__);
+
+ beagle_config.dvi_pd_gpio = gpio + 2;
+
} else {
/*
* REVISIT: need ehci-omap hooks for external VBUS
@@ -287,7 +285,7 @@
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
- dvi_panel.power_down_gpio = beagle_config.reset_gpio;
+ dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
"nEN_USB_PWR");
@@ -435,7 +433,7 @@
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -499,7 +497,7 @@
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
- if (beagle_config.mmc1_gpio_wp != -EINVAL)
+ if (gpio_is_valid(beagle_config.mmc1_gpio_wp))
omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
mmc[0].caps = beagle_config.mmc_caps;
omap_hsmmc_init(mmc);
@@ -510,15 +508,13 @@
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
+ if (gpio_is_valid(beagle_config.dvi_pd_gpio))
+ omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
omap_display_init(&beagle_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
- omap_mux_init_gpio(170, OMAP_PIN_INPUT);
- /* REVISIT leave DVI powered down until it's needed ... */
- gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
-
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 639bd07..ef230a0 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -24,6 +24,10 @@
#include <linux/leds.h>
#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl.h>
@@ -43,6 +47,7 @@
#include <plat/board.h>
#include <plat/usb.h>
+#include <plat/nand.h>
#include "common.h"
#include <plat/mcspi.h>
#include <video/omapdss.h>
@@ -53,7 +58,6 @@
#include "hsmmc.h"
#include "common-board-devices.h"
-#define OMAP3_EVM_TS_GPIO 175
#define OMAP3_EVM_EHCI_VBUS 22
#define OMAP3_EVM_EHCI_SELECT 61
@@ -355,6 +359,19 @@
platform_device_register(&leds_gpio);
+ /* Enable VBUS switch by setting TWL4030.GPIO2DIR as output
+ * for starting USB tranceiver
+ */
+#ifdef CONFIG_TWL4030_CORE
+ if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
+ u8 val;
+
+ twl_i2c_read_u8(TWL4030_MODULE_GPIO, &val, REG_GPIODATADIR1);
+ val |= 0x04; /* TWL4030.GPIO2DIR BIT at GPIODATADIR1(0x9B) */
+ twl_i2c_write_u8(TWL4030_MODULE_GPIO, val, REG_GPIODATADIR1);
+ }
+#endif
+
return 0;
}
@@ -461,6 +478,28 @@
};
#endif
+/* VAUX2 for USB */
+static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = {
+ REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */
+ REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */
+ REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
+ REGULATOR_SUPPLY("vaux2", NULL),
+};
+
+static struct regulator_init_data omap3evm_vaux2 = {
+ .constraints = {
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(omap3evm_vaux2_supplies),
+ .consumer_supplies = omap3evm_vaux2_supplies,
+};
+
static struct twl4030_platform_data omap3evm_twldata = {
/* platform_data for children goes here */
.keypad = &omap3evm_kp_data,
@@ -607,6 +646,37 @@
REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
};
+static struct mtd_partition omap3evm_nand_partitions[] = {
+ /* All the partition sizes are listed in terms of NAND block size */
+ {
+ .name = "X-Loader",
+ .offset = 0,
+ .size = 4*(SZ_128K),
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 14*(SZ_128K),
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "U-Boot Env",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 2*(SZ_128K)
+ },
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 40*(SZ_128K)
+ },
+ {
+ .name = "File system",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ },
+};
+
static void __init omap3_evm_init(void)
{
struct omap_board_mux *obm;
@@ -623,6 +693,9 @@
omap_mux_init_gpio(63, OMAP_PIN_INPUT);
omap_hsmmc_init(mmc);
+ if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
+ omap3evm_twldata.vaux2 = &omap3evm_vaux2;
+
omap3_evm_i2c_init();
omap_display_init(&omap3_evm_dss_data);
@@ -656,6 +729,9 @@
}
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
+ omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
+ ARRAY_SIZE(omap3evm_nand_partitions));
+
omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
omap3evm_init_smsc911x();
omap3_evm_display_init();
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 932e177..fca93d1 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -93,9 +93,6 @@
static struct twl4030_platform_data omap3logic_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
.gpio = &omap3logic_gpio_data,
.vmmc1 = &omap3logic_vmmc1,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 982fb26..b627cdc 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -379,6 +379,9 @@
OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data0 */
OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* NIRQ2 for twl6040 */
+ OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
+ OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 8fa2fc3..779734d 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -494,8 +494,8 @@
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_hsmmc_init(mmc);
overo_i2c_init();
+ omap_hsmmc_init(mmc);
omap_display_init(&overo_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index ff53dec..df2534d 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -144,7 +144,6 @@
.release_resources = lis302_release,
.st_min_limits = {-32, 3, 3},
.st_max_limits = {-3, 32, 32},
- .irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO),
};
#endif
@@ -1030,7 +1029,6 @@
{
I2C_BOARD_INFO("lis3lv02d", 0x1d),
.platform_data = &rx51_lis3lv02d_data,
- .irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO),
},
#endif
};
@@ -1056,6 +1054,10 @@
omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
+#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
+ rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO);
+ rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO);
+#endif
omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_3));
return 0;
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 5c4e665..ea3f565 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -398,24 +398,6 @@
return omap2_clksel_set_parent(clk, new_parent);
}
-/* OMAP3/4 non-CORE DPLL clkops */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-
-const struct clkops clkops_omap3_noncore_dpll_ops = {
- .enable = omap3_noncore_dpll_enable,
- .disable = omap3_noncore_dpll_disable,
- .allow_idle = omap3_dpll_allow_idle,
- .deny_idle = omap3_dpll_deny_idle,
-};
-
-const struct clkops clkops_omap3_core_dpll_ops = {
- .allow_idle = omap3_dpll_allow_idle,
- .deny_idle = omap3_dpll_deny_idle,
-};
-
-#endif
-
/*
* OMAP2+ clock reset and init functions
*/
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index a1bb23a..35ec5f3 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -155,4 +155,18 @@
extern const struct clkops clkops_omap3_core_dpll_ops;
extern const struct clkops clkops_omap4_dpllmx_ops;
+/* clksel_rate blocks shared between OMAP44xx and AM33xx */
+extern const struct clksel_rate div_1_0_rates[];
+extern const struct clksel_rate div_1_1_rates[];
+extern const struct clksel_rate div_1_2_rates[];
+extern const struct clksel_rate div_1_3_rates[];
+extern const struct clksel_rate div_1_4_rates[];
+extern const struct clksel_rate div31_1to31_rates[];
+
+/* clocks shared between various OMAP SoCs */
+extern struct clk virt_19200000_ck;
+extern struct clk virt_26000000_ck;
+
+extern int am33xx_clk_init(void);
+
#endif
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index bace930..0027451 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1774,8 +1774,6 @@
CLK(NULL, "osc_ck", &osc_ck, CK_242X),
CLK(NULL, "sys_ck", &sys_ck, CK_242X),
CLK(NULL, "alt_ck", &alt_ck, CK_242X),
- CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_242X),
- CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_242X),
CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_242X),
/* internal analog sources */
CLK(NULL, "dpll_ck", &dpll_ck, CK_242X),
@@ -1784,8 +1782,6 @@
/* internal prcm root sources */
CLK(NULL, "func_54m_ck", &func_54m_ck, CK_242X),
CLK(NULL, "core_ck", &core_ck, CK_242X),
- CLK("omap-mcbsp.1", "prcm_fck", &func_96m_ck, CK_242X),
- CLK("omap-mcbsp.2", "prcm_fck", &func_96m_ck, CK_242X),
CLK(NULL, "func_96m_ck", &func_96m_ck, CK_242X),
CLK(NULL, "func_48m_ck", &func_48m_ck, CK_242X),
CLK(NULL, "func_12m_ck", &func_12m_ck, CK_242X),
@@ -1901,42 +1897,9 @@
CLK(NULL, "pka_ick", &pka_ick, CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_242X),
CLK("musb-hdrc", "fck", &osc_ck, CK_242X),
- CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.4", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.5", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.6", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.7", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.8", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.9", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.10", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.11", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.12", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.1", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.2", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.3", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.4", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.5", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.6", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.7", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.8", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.9", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.10", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.11", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.12", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.1", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.2", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.3", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.4", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.5", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.6", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.7", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.8", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.9", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.10", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.11", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.12", "alt_ck", &alt_ck, CK_243X),
+ CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_243X),
+ CLK(NULL, "timer_sys_ck", &sys_ck, CK_243X),
+ CLK(NULL, "timer_ext_ck", &alt_ck, CK_243X),
};
/*
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 3b4d09a..cacabb0 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1858,11 +1858,6 @@
CLK(NULL, "osc_ck", &osc_ck, CK_243X),
CLK(NULL, "sys_ck", &sys_ck, CK_243X),
CLK(NULL, "alt_ck", &alt_ck, CK_243X),
- CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_243X),
- CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_243X),
- CLK("omap-mcbsp.3", "pad_fck", &mcbsp_clks, CK_243X),
- CLK("omap-mcbsp.4", "pad_fck", &mcbsp_clks, CK_243X),
- CLK("omap-mcbsp.5", "pad_fck", &mcbsp_clks, CK_243X),
CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_243X),
/* internal analog sources */
CLK(NULL, "dpll_ck", &dpll_ck, CK_243X),
@@ -1871,11 +1866,6 @@
/* internal prcm root sources */
CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X),
CLK(NULL, "core_ck", &core_ck, CK_243X),
- CLK("omap-mcbsp.1", "prcm_fck", &func_96m_ck, CK_243X),
- CLK("omap-mcbsp.2", "prcm_fck", &func_96m_ck, CK_243X),
- CLK("omap-mcbsp.3", "prcm_fck", &func_96m_ck, CK_243X),
- CLK("omap-mcbsp.4", "prcm_fck", &func_96m_ck, CK_243X),
- CLK("omap-mcbsp.5", "prcm_fck", &func_96m_ck, CK_243X),
CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X),
CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X),
CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X),
@@ -2000,42 +1990,9 @@
CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X),
CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X),
CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X),
- CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.4", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.5", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.6", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.7", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.8", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.9", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.10", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.11", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.12", "32k_ck", &func_32k_ck, CK_243X),
- CLK("omap_timer.1", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.2", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.3", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.4", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.5", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.6", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.7", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.8", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.9", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.10", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.11", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.12", "sys_ck", &sys_ck, CK_243X),
- CLK("omap_timer.1", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.2", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.3", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.4", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.5", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.6", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.7", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.8", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.9", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.10", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.11", "alt_ck", &alt_ck, CK_243X),
- CLK("omap_timer.12", "alt_ck", &alt_ck, CK_243X),
+ CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_243X),
+ CLK(NULL, "timer_sys_ck", &sys_ck, CK_243X),
+ CLK(NULL, "timer_ext_ck", &alt_ck, CK_243X),
};
/*
diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c
new file mode 100644
index 0000000..25bbcc7
--- /dev/null
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@@ -0,0 +1,1105 @@
+/*
+ * AM33XX Clock data
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <plat/clkdev_omap.h>
+#include <plat/am33xx.h>
+
+#include "iomap.h"
+#include "control.h"
+#include "clock.h"
+#include "cm.h"
+#include "cm33xx.h"
+#include "cm-regbits-33xx.h"
+#include "prm.h"
+
+/* Maximum DPLL multiplier, divider values for AM33XX */
+#define AM33XX_MAX_DPLL_MULT 2047
+#define AM33XX_MAX_DPLL_DIV 128
+
+/* Modulemode control */
+#define AM33XX_MODULEMODE_HWCTRL 0
+#define AM33XX_MODULEMODE_SWCTRL 1
+
+/* TRM ERRATA: Timer 3 & 6 default parent (TCLKIN) may not be always
+ * physically present, in such a case HWMOD enabling of
+ * clock would be failure with default parent. And timer
+ * probe thinks clock is already enabled, this leads to
+ * crash upon accessing timer 3 & 6 registers in probe.
+ * Fix by setting parent of both these timers to master
+ * oscillator clock.
+ */
+static inline void am33xx_init_timer_parent(struct clk *clk)
+{
+ omap2_clksel_set_parent(clk, clk->parent);
+}
+
+/* Root clocks */
+
+/* RTC 32k */
+static struct clk clk_32768_ck = {
+ .name = "clk_32768_ck",
+ .clkdm_name = "l4_rtc_clkdm",
+ .rate = 32768,
+ .ops = &clkops_null,
+};
+
+/* On-Chip 32KHz RC OSC */
+static struct clk clk_rc32k_ck = {
+ .name = "clk_rc32k_ck",
+ .rate = 32000,
+ .ops = &clkops_null,
+};
+
+/* Crystal input clks */
+static struct clk virt_24000000_ck = {
+ .name = "virt_24000000_ck",
+ .rate = 24000000,
+ .ops = &clkops_null,
+};
+
+static struct clk virt_25000000_ck = {
+ .name = "virt_25000000_ck",
+ .rate = 25000000,
+ .ops = &clkops_null,
+};
+
+/* Oscillator clock */
+/* 19.2, 24, 25 or 26 MHz */
+static const struct clksel sys_clkin_sel[] = {
+ { .parent = &virt_19200000_ck, .rates = div_1_0_rates },
+ { .parent = &virt_24000000_ck, .rates = div_1_1_rates },
+ { .parent = &virt_25000000_ck, .rates = div_1_2_rates },
+ { .parent = &virt_26000000_ck, .rates = div_1_3_rates },
+ { .parent = NULL },
+};
+
+/* External clock - 12 MHz */
+static struct clk tclkin_ck = {
+ .name = "tclkin_ck",
+ .rate = 12000000,
+ .ops = &clkops_null,
+};
+
+/*
+ * sys_clk in: input to the dpll and also used as funtional clock for,
+ * adc_tsc, smartreflex0-1, timer1-7, mcasp0-1, dcan0-1, cefuse
+ *
+ */
+static struct clk sys_clkin_ck = {
+ .name = "sys_clkin_ck",
+ .parent = &virt_24000000_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel_reg = AM33XX_CTRL_REGADDR(AM33XX_CONTROL_STATUS),
+ .clksel_mask = AM33XX_CONTROL_STATUS_SYSBOOT1_MASK,
+ .clksel = sys_clkin_sel,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+};
+
+/* DPLL_CORE */
+static struct dpll_data dpll_core_dd = {
+ .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_CORE,
+ .clk_bypass = &sys_clkin_ck,
+ .clk_ref = &sys_clkin_ck,
+ .control_reg = AM33XX_CM_CLKMODE_DPLL_CORE,
+ .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+ .idlest_reg = AM33XX_CM_IDLEST_DPLL_CORE,
+ .mult_mask = AM33XX_DPLL_MULT_MASK,
+ .div1_mask = AM33XX_DPLL_DIV_MASK,
+ .enable_mask = AM33XX_DPLL_EN_MASK,
+ .idlest_mask = AM33XX_ST_DPLL_CLK_MASK,
+ .max_multiplier = AM33XX_MAX_DPLL_MULT,
+ .max_divider = AM33XX_MAX_DPLL_DIV,
+ .min_divider = 1,
+};
+
+/* CLKDCOLDO output */
+static struct clk dpll_core_ck = {
+ .name = "dpll_core_ck",
+ .parent = &sys_clkin_ck,
+ .dpll_data = &dpll_core_dd,
+ .init = &omap2_init_dpll_parent,
+ .ops = &clkops_omap3_core_dpll_ops,
+ .recalc = &omap3_dpll_recalc,
+};
+
+static struct clk dpll_core_x2_ck = {
+ .name = "dpll_core_x2_ck",
+ .parent = &dpll_core_ck,
+ .flags = CLOCK_CLKOUTX2,
+ .ops = &clkops_null,
+ .recalc = &omap3_clkoutx2_recalc,
+};
+
+
+static const struct clksel dpll_core_m4_div[] = {
+ { .parent = &dpll_core_x2_ck, .rates = div31_1to31_rates },
+ { .parent = NULL },
+};
+
+static struct clk dpll_core_m4_ck = {
+ .name = "dpll_core_m4_ck",
+ .parent = &dpll_core_x2_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel = dpll_core_m4_div,
+ .clksel_reg = AM33XX_CM_DIV_M4_DPLL_CORE,
+ .clksel_mask = AM33XX_HSDIVIDER_CLKOUT1_DIV_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate,
+};
+
+static const struct clksel dpll_core_m5_div[] = {
+ { .parent = &dpll_core_x2_ck, .rates = div31_1to31_rates },
+ { .parent = NULL },
+};
+
+static struct clk dpll_core_m5_ck = {
+ .name = "dpll_core_m5_ck",
+ .parent = &dpll_core_x2_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel = dpll_core_m5_div,
+ .clksel_reg = AM33XX_CM_DIV_M5_DPLL_CORE,
+ .clksel_mask = AM33XX_HSDIVIDER_CLKOUT2_DIV_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate,
+};
+
+static const struct clksel dpll_core_m6_div[] = {
+ { .parent = &dpll_core_x2_ck, .rates = div31_1to31_rates },
+ { .parent = NULL },
+};
+
+static struct clk dpll_core_m6_ck = {
+ .name = "dpll_core_m6_ck",
+ .parent = &dpll_core_x2_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel = dpll_core_m6_div,
+ .clksel_reg = AM33XX_CM_DIV_M6_DPLL_CORE,
+ .clksel_mask = AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate,
+};
+
+/* DPLL_MPU */
+static struct dpll_data dpll_mpu_dd = {
+ .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_MPU,
+ .clk_bypass = &sys_clkin_ck,
+ .clk_ref = &sys_clkin_ck,
+ .control_reg = AM33XX_CM_CLKMODE_DPLL_MPU,
+ .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+ .idlest_reg = AM33XX_CM_IDLEST_DPLL_MPU,
+ .mult_mask = AM33XX_DPLL_MULT_MASK,
+ .div1_mask = AM33XX_DPLL_DIV_MASK,
+ .enable_mask = AM33XX_DPLL_EN_MASK,
+ .idlest_mask = AM33XX_ST_DPLL_CLK_MASK,
+ .max_multiplier = AM33XX_MAX_DPLL_MULT,
+ .max_divider = AM33XX_MAX_DPLL_DIV,
+ .min_divider = 1,
+};
+
+/* CLKOUT: fdpll/M2 */
+static struct clk dpll_mpu_ck = {
+ .name = "dpll_mpu_ck",
+ .parent = &sys_clkin_ck,
+ .dpll_data = &dpll_mpu_dd,
+ .init = &omap2_init_dpll_parent,
+ .ops = &clkops_omap3_noncore_dpll_ops,
+ .recalc = &omap3_dpll_recalc,
+ .round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
+};
+
+/*
+ * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
+ * and ALT_CLK1/2)
+ */
+static const struct clksel dpll_mpu_m2_div[] = {
+ { .parent = &dpll_mpu_ck, .rates = div31_1to31_rates },
+ { .parent = NULL },
+};
+
+static struct clk dpll_mpu_m2_ck = {
+ .name = "dpll_mpu_m2_ck",
+ .clkdm_name = "mpu_clkdm",
+ .parent = &dpll_mpu_ck,
+ .clksel = dpll_mpu_m2_div,
+ .clksel_reg = AM33XX_CM_DIV_M2_DPLL_MPU,
+ .clksel_mask = AM33XX_DPLL_CLKOUT_DIV_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate,
+};
+
+/* DPLL_DDR */
+static struct dpll_data dpll_ddr_dd = {
+ .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_DDR,
+ .clk_bypass = &sys_clkin_ck,
+ .clk_ref = &sys_clkin_ck,
+ .control_reg = AM33XX_CM_CLKMODE_DPLL_DDR,
+ .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+ .idlest_reg = AM33XX_CM_IDLEST_DPLL_DDR,
+ .mult_mask = AM33XX_DPLL_MULT_MASK,
+ .div1_mask = AM33XX_DPLL_DIV_MASK,
+ .enable_mask = AM33XX_DPLL_EN_MASK,
+ .idlest_mask = AM33XX_ST_DPLL_CLK_MASK,
+ .max_multiplier = AM33XX_MAX_DPLL_MULT,
+ .max_divider = AM33XX_MAX_DPLL_DIV,
+ .min_divider = 1,
+};
+
+/* CLKOUT: fdpll/M2 */
+static struct clk dpll_ddr_ck = {
+ .name = "dpll_ddr_ck",
+ .parent = &sys_clkin_ck,
+ .dpll_data = &dpll_ddr_dd,
+ .init = &omap2_init_dpll_parent,
+ .ops = &clkops_null,
+ .recalc = &omap3_dpll_recalc,
+};
+
+/*
+ * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
+ * and ALT_CLK1/2)
+ */
+static const struct clksel dpll_ddr_m2_div[] = {
+ { .parent = &dpll_ddr_ck, .rates = div31_1to31_rates },
+ { .parent = NULL },
+};
+
+static struct clk dpll_ddr_m2_ck = {
+ .name = "dpll_ddr_m2_ck",
+ .parent = &dpll_ddr_ck,
+ .clksel = dpll_ddr_m2_div,
+ .clksel_reg = AM33XX_CM_DIV_M2_DPLL_DDR,
+ .clksel_mask = AM33XX_DPLL_CLKOUT_DIV_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate,
+};
+
+/* emif_fck functional clock */
+static struct clk dpll_ddr_m2_div2_ck = {
+ .name = "dpll_ddr_m2_div2_ck",
+ .clkdm_name = "l3_clkdm",
+ .parent = &dpll_ddr_m2_ck,
+ .ops = &clkops_null,
+ .fixed_div = 2,
+ .recalc = &omap_fixed_divisor_recalc,
+};
+
+/* DPLL_DISP */
+static struct dpll_data dpll_disp_dd = {
+ .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_DISP,
+ .clk_bypass = &sys_clkin_ck,
+ .clk_ref = &sys_clkin_ck,
+ .control_reg = AM33XX_CM_CLKMODE_DPLL_DISP,
+ .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+ .idlest_reg = AM33XX_CM_IDLEST_DPLL_DISP,
+ .mult_mask = AM33XX_DPLL_MULT_MASK,
+ .div1_mask = AM33XX_DPLL_DIV_MASK,
+ .enable_mask = AM33XX_DPLL_EN_MASK,
+ .idlest_mask = AM33XX_ST_DPLL_CLK_MASK,
+ .max_multiplier = AM33XX_MAX_DPLL_MULT,
+ .max_divider = AM33XX_MAX_DPLL_DIV,
+ .min_divider = 1,
+};
+
+/* CLKOUT: fdpll/M2 */
+static struct clk dpll_disp_ck = {
+ .name = "dpll_disp_ck",
+ .parent = &sys_clkin_ck,
+ .dpll_data = &dpll_disp_dd,
+ .init = &omap2_init_dpll_parent,
+ .ops = &clkops_null,
+ .recalc = &omap3_dpll_recalc,
+ .round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
+};
+
+/*
+ * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
+ * and ALT_CLK1/2)
+ */
+static const struct clksel dpll_disp_m2_div[] = {
+ { .parent = &dpll_disp_ck, .rates = div31_1to31_rates },
+ { .parent = NULL },
+};
+
+static struct clk dpll_disp_m2_ck = {
+ .name = "dpll_disp_m2_ck",
+ .parent = &dpll_disp_ck,
+ .clksel = dpll_disp_m2_div,
+ .clksel_reg = AM33XX_CM_DIV_M2_DPLL_DISP,
+ .clksel_mask = AM33XX_DPLL_CLKOUT_DIV_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate,
+};
+
+/* DPLL_PER */
+static struct dpll_data dpll_per_dd = {
+ .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_PERIPH,
+ .clk_bypass = &sys_clkin_ck,
+ .clk_ref = &sys_clkin_ck,
+ .control_reg = AM33XX_CM_CLKMODE_DPLL_PER,
+ .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+ .idlest_reg = AM33XX_CM_IDLEST_DPLL_PER,
+ .mult_mask = AM33XX_DPLL_MULT_PERIPH_MASK,
+ .div1_mask = AM33XX_DPLL_PER_DIV_MASK,
+ .enable_mask = AM33XX_DPLL_EN_MASK,
+ .idlest_mask = AM33XX_ST_DPLL_CLK_MASK,
+ .max_multiplier = AM33XX_MAX_DPLL_MULT,
+ .max_divider = AM33XX_MAX_DPLL_DIV,
+ .min_divider = 1,
+ .flags = DPLL_J_TYPE,
+};
+
+/* CLKDCOLDO */
+static struct clk dpll_per_ck = {
+ .name = "dpll_per_ck",
+ .parent = &sys_clkin_ck,
+ .dpll_data = &dpll_per_dd,
+ .init = &omap2_init_dpll_parent,
+ .ops = &clkops_null,
+ .recalc = &omap3_dpll_recalc,
+ .round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
+};
+
+/* CLKOUT: fdpll/M2 */
+static const struct clksel dpll_per_m2_div[] = {
+ { .parent = &dpll_per_ck, .rates = div31_1to31_rates },
+ { .parent = NULL },
+};
+
+static struct clk dpll_per_m2_ck = {
+ .name = "dpll_per_m2_ck",
+ .parent = &dpll_per_ck,
+ .clksel = dpll_per_m2_div,
+ .clksel_reg = AM33XX_CM_DIV_M2_DPLL_PER,
+ .clksel_mask = AM33XX_DPLL_CLKOUT_DIV_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate,
+};
+
+static struct clk dpll_per_m2_div4_wkupdm_ck = {
+ .name = "dpll_per_m2_div4_wkupdm_ck",
+ .clkdm_name = "l4_wkup_clkdm",
+ .parent = &dpll_per_m2_ck,
+ .fixed_div = 4,
+ .ops = &clkops_null,
+ .recalc = &omap_fixed_divisor_recalc,
+};
+
+static struct clk dpll_per_m2_div4_ck = {
+ .name = "dpll_per_m2_div4_ck",
+ .clkdm_name = "l4ls_clkdm",
+ .parent = &dpll_per_m2_ck,
+ .fixed_div = 4,
+ .ops = &clkops_null,
+ .recalc = &omap_fixed_divisor_recalc,
+};
+
+static struct clk l3_gclk = {
+ .name = "l3_gclk",
+ .clkdm_name = "l3_clkdm",
+ .parent = &dpll_core_m4_ck,
+ .ops = &clkops_null,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk dpll_core_m4_div2_ck = {
+ .name = "dpll_core_m4_div2_ck",
+ .clkdm_name = "l4_wkup_clkdm",
+ .parent = &dpll_core_m4_ck,
+ .ops = &clkops_null,
+ .fixed_div = 2,
+ .recalc = &omap_fixed_divisor_recalc,
+};
+
+static struct clk l4_rtc_gclk = {
+ .name = "l4_rtc_gclk",
+ .parent = &dpll_core_m4_ck,
+ .ops = &clkops_null,
+ .fixed_div = 2,
+ .recalc = &omap_fixed_divisor_recalc,
+};
+
+static struct clk clk_24mhz = {
+ .name = "clk_24mhz",
+ .parent = &dpll_per_m2_ck,
+ .fixed_div = 8,
+ .ops = &clkops_null,
+ .recalc = &omap_fixed_divisor_recalc,
+};
+
+/*
+ * Below clock nodes describes clockdomains derived out
+ * of core clock.
+ */
+static struct clk l4hs_gclk = {
+ .name = "l4hs_gclk",
+ .clkdm_name = "l4hs_clkdm",
+ .parent = &dpll_core_m4_ck,
+ .ops = &clkops_null,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk l3s_gclk = {
+ .name = "l3s_gclk",
+ .clkdm_name = "l3s_clkdm",
+ .parent = &dpll_core_m4_div2_ck,
+ .ops = &clkops_null,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk l4fw_gclk = {
+ .name = "l4fw_gclk",
+ .clkdm_name = "l4fw_clkdm",
+ .parent = &dpll_core_m4_div2_ck,
+ .ops = &clkops_null,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk l4ls_gclk = {
+ .name = "l4ls_gclk",
+ .clkdm_name = "l4ls_clkdm",
+ .parent = &dpll_core_m4_div2_ck,
+ .ops = &clkops_null,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk sysclk_div_ck = {
+ .name = "sysclk_div_ck",
+ .parent = &dpll_core_m4_ck,
+ .ops = &clkops_null,
+ .recalc = &followparent_recalc,
+};
+
+/*
+ * In order to match the clock domain with hwmod clockdomain entry,
+ * separate clock nodes is required for the modules which are
+ * directly getting their funtioncal clock from sys_clkin.
+ */
+static struct clk adc_tsc_fck = {
+ .name = "adc_tsc_fck",
+ .clkdm_name = "l4_wkup_clkdm",
+ .parent = &sys_clkin_ck,
+ .ops = &clkops_null,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk dcan0_fck = {
+ .name = "dcan0_fck",
+ .clkdm_name = "l4ls_clkdm",
+ .parent = &sys_clkin_ck,
+ .ops = &clkops_null,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk dcan1_fck = {
+ .name = "dcan1_fck",
+ .clkdm_name = "l4ls_clkdm",
+ .parent = &sys_clkin_ck,
+ .ops = &clkops_null,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk mcasp0_fck = {
+ .name = "mcasp0_fck",
+ .clkdm_name = "l3s_clkdm",
+ .parent = &sys_clkin_ck,
+ .ops = &clkops_null,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk mcasp1_fck = {
+ .name = "mcasp1_fck",
+ .clkdm_name = "l3s_clkdm",
+ .parent = &sys_clkin_ck,
+ .ops = &clkops_null,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk smartreflex0_fck = {
+ .name = "smartreflex0_fck",
+ .clkdm_name = "l4_wkup_clkdm",
+ .parent = &sys_clkin_ck,
+ .ops = &clkops_null,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk smartreflex1_fck = {
+ .name = "smartreflex1_fck",
+ .clkdm_name = "l4_wkup_clkdm",
+ .parent = &sys_clkin_ck,
+ .ops = &clkops_null,
+ .recalc = &followparent_recalc,
+};
+
+/*
+ * Modules clock nodes
+ *
+ * The following clock leaf nodes are added for the moment because:
+ *
+ * - hwmod data is not present for these modules, either hwmod
+ * control is not required or its not populated.
+ * - Driver code is not yet migrated to use hwmod/runtime pm
+ * - Modules outside kernel access (to disable them by default)
+ *
+ * - debugss
+ * - mmu (gfx domain)
+ * - cefuse
+ * - usbotg_fck (its additional clock and not really a modulemode)
+ * - ieee5000
+ */
+static struct clk debugss_ick = {
+ .name = "debugss_ick",
+ .clkdm_name = "l3_aon_clkdm",
+ .parent = &dpll_core_m4_ck,
+ .ops = &clkops_omap2_dflt,
+ .enable_reg = AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
+ .enable_bit = AM33XX_MODULEMODE_SWCTRL,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk mmu_fck = {
+ .name = "mmu_fck",
+ .clkdm_name = "gfx_l3_clkdm",
+ .parent = &dpll_core_m4_ck,
+ .ops = &clkops_omap2_dflt,
+ .enable_reg = AM33XX_CM_GFX_MMUDATA_CLKCTRL,
+ .enable_bit = AM33XX_MODULEMODE_SWCTRL,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk cefuse_fck = {
+ .name = "cefuse_fck",
+ .clkdm_name = "l4_cefuse_clkdm",
+ .parent = &sys_clkin_ck,
+ .enable_reg = AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL,
+ .enable_bit = AM33XX_MODULEMODE_SWCTRL,
+ .ops = &clkops_omap2_dflt,
+ .recalc = &followparent_recalc,
+};
+
+/*
+ * clkdiv32 is generated from fixed division of 732.4219
+ */
+static struct clk clkdiv32k_ick = {
+ .name = "clkdiv32k_ick",
+ .clkdm_name = "clk_24mhz_clkdm",
+ .rate = 32768,
+ .parent = &clk_24mhz,
+ .enable_reg = AM33XX_CM_PER_CLKDIV32K_CLKCTRL,
+ .enable_bit = AM33XX_MODULEMODE_SWCTRL,
+ .ops = &clkops_omap2_dflt,
+};
+
+static struct clk usbotg_fck = {
+ .name = "usbotg_fck",
+ .clkdm_name = "l3s_clkdm",
+ .parent = &dpll_per_ck,
+ .enable_reg = AM33XX_CM_CLKDCOLDO_DPLL_PER,
+ .enable_bit = AM33XX_ST_DPLL_CLKDCOLDO_SHIFT,
+ .ops = &clkops_omap2_dflt,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk ieee5000_fck = {
+ .name = "ieee5000_fck",
+ .clkdm_name = "l3s_clkdm",
+ .parent = &dpll_core_m4_div2_ck,
+ .enable_reg = AM33XX_CM_PER_IEEE5000_CLKCTRL,
+ .enable_bit = AM33XX_MODULEMODE_SWCTRL,
+ .ops = &clkops_omap2_dflt,
+ .recalc = &followparent_recalc,
+};
+
+/* Timers */
+static const struct clksel timer1_clkmux_sel[] = {
+ { .parent = &sys_clkin_ck, .rates = div_1_0_rates },
+ { .parent = &clkdiv32k_ick, .rates = div_1_1_rates },
+ { .parent = &tclkin_ck, .rates = div_1_2_rates },
+ { .parent = &clk_rc32k_ck, .rates = div_1_3_rates },
+ { .parent = &clk_32768_ck, .rates = div_1_4_rates },
+ { .parent = NULL },
+};
+
+static struct clk timer1_fck = {
+ .name = "timer1_fck",
+ .clkdm_name = "l4ls_clkdm",
+ .parent = &sys_clkin_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel = timer1_clkmux_sel,
+ .clksel_reg = AM33XX_CLKSEL_TIMER1MS_CLK,
+ .clksel_mask = AM33XX_CLKSEL_0_2_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static const struct clksel timer2_to_7_clk_sel[] = {
+ { .parent = &tclkin_ck, .rates = div_1_0_rates },
+ { .parent = &sys_clkin_ck, .rates = div_1_1_rates },
+ { .parent = &clkdiv32k_ick, .rates = div_1_2_rates },
+ { .parent = NULL },
+};
+
+static struct clk timer2_fck = {
+ .name = "timer2_fck",
+ .clkdm_name = "l4ls_clkdm",
+ .parent = &sys_clkin_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel = timer2_to_7_clk_sel,
+ .clksel_reg = AM33XX_CLKSEL_TIMER2_CLK,
+ .clksel_mask = AM33XX_CLKSEL_0_1_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk timer3_fck = {
+ .name = "timer3_fck",
+ .clkdm_name = "l4ls_clkdm",
+ .parent = &sys_clkin_ck,
+ .init = &am33xx_init_timer_parent,
+ .clksel = timer2_to_7_clk_sel,
+ .clksel_reg = AM33XX_CLKSEL_TIMER3_CLK,
+ .clksel_mask = AM33XX_CLKSEL_0_1_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk timer4_fck = {
+ .name = "timer4_fck",
+ .clkdm_name = "l4ls_clkdm",
+ .parent = &sys_clkin_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel = timer2_to_7_clk_sel,
+ .clksel_reg = AM33XX_CLKSEL_TIMER4_CLK,
+ .clksel_mask = AM33XX_CLKSEL_0_1_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk timer5_fck = {
+ .name = "timer5_fck",
+ .clkdm_name = "l4ls_clkdm",
+ .parent = &sys_clkin_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel = timer2_to_7_clk_sel,
+ .clksel_reg = AM33XX_CLKSEL_TIMER5_CLK,
+ .clksel_mask = AM33XX_CLKSEL_0_1_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk timer6_fck = {
+ .name = "timer6_fck",
+ .clkdm_name = "l4ls_clkdm",
+ .parent = &sys_clkin_ck,
+ .init = &am33xx_init_timer_parent,
+ .clksel = timer2_to_7_clk_sel,
+ .clksel_reg = AM33XX_CLKSEL_TIMER6_CLK,
+ .clksel_mask = AM33XX_CLKSEL_0_1_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk timer7_fck = {
+ .name = "timer7_fck",
+ .clkdm_name = "l4ls_clkdm",
+ .parent = &sys_clkin_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel = timer2_to_7_clk_sel,
+ .clksel_reg = AM33XX_CLKSEL_TIMER7_CLK,
+ .clksel_mask = AM33XX_CLKSEL_0_1_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk cpsw_125mhz_gclk = {
+ .name = "cpsw_125mhz_gclk",
+ .clkdm_name = "cpsw_125mhz_clkdm",
+ .parent = &dpll_core_m5_ck,
+ .ops = &clkops_null,
+ .fixed_div = 2,
+ .recalc = &omap_fixed_divisor_recalc,
+};
+
+static const struct clksel cpsw_cpts_rft_clkmux_sel[] = {
+ { .parent = &dpll_core_m5_ck, .rates = div_1_0_rates },
+ { .parent = &dpll_core_m4_ck, .rates = div_1_1_rates },
+ { .parent = NULL },
+};
+
+static struct clk cpsw_cpts_rft_clk = {
+ .name = "cpsw_cpts_rft_clk",
+ .clkdm_name = "cpsw_125mhz_clkdm",
+ .parent = &dpll_core_m5_ck,
+ .clksel = cpsw_cpts_rft_clkmux_sel,
+ .clksel_reg = AM33XX_CM_CPTS_RFT_CLKSEL,
+ .clksel_mask = AM33XX_CLKSEL_0_0_MASK,
+ .ops = &clkops_null,
+ .recalc = &followparent_recalc,
+};
+
+/* gpio */
+static const struct clksel gpio0_dbclk_mux_sel[] = {
+ { .parent = &clk_rc32k_ck, .rates = div_1_0_rates },
+ { .parent = &clk_32768_ck, .rates = div_1_1_rates },
+ { .parent = &clkdiv32k_ick, .rates = div_1_2_rates },
+ { .parent = NULL },
+};
+
+static struct clk gpio0_dbclk_mux_ck = {
+ .name = "gpio0_dbclk_mux_ck",
+ .clkdm_name = "l4_wkup_clkdm",
+ .parent = &clk_rc32k_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel = gpio0_dbclk_mux_sel,
+ .clksel_reg = AM33XX_CLKSEL_GPIO0_DBCLK,
+ .clksel_mask = AM33XX_CLKSEL_0_1_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk gpio0_dbclk = {
+ .name = "gpio0_dbclk",
+ .clkdm_name = "l4_wkup_clkdm",
+ .parent = &gpio0_dbclk_mux_ck,
+ .enable_reg = AM33XX_CM_WKUP_GPIO0_CLKCTRL,
+ .enable_bit = AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT,
+ .ops = &clkops_omap2_dflt,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk gpio1_dbclk = {
+ .name = "gpio1_dbclk",
+ .clkdm_name = "l4ls_clkdm",
+ .parent = &clkdiv32k_ick,
+ .enable_reg = AM33XX_CM_PER_GPIO1_CLKCTRL,
+ .enable_bit = AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT,
+ .ops = &clkops_omap2_dflt,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk gpio2_dbclk = {
+ .name = "gpio2_dbclk",
+ .clkdm_name = "l4ls_clkdm",
+ .parent = &clkdiv32k_ick,
+ .enable_reg = AM33XX_CM_PER_GPIO2_CLKCTRL,
+ .enable_bit = AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT,
+ .ops = &clkops_omap2_dflt,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk gpio3_dbclk = {
+ .name = "gpio3_dbclk",
+ .clkdm_name = "l4ls_clkdm",
+ .parent = &clkdiv32k_ick,
+ .enable_reg = AM33XX_CM_PER_GPIO3_CLKCTRL,
+ .enable_bit = AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT,
+ .ops = &clkops_omap2_dflt,
+ .recalc = &followparent_recalc,
+};
+
+static const struct clksel pruss_ocp_clk_mux_sel[] = {
+ { .parent = &l3_gclk, .rates = div_1_0_rates },
+ { .parent = &dpll_disp_m2_ck, .rates = div_1_1_rates },
+ { .parent = NULL },
+};
+
+static struct clk pruss_ocp_gclk = {
+ .name = "pruss_ocp_gclk",
+ .clkdm_name = "pruss_ocp_clkdm",
+ .parent = &l3_gclk,
+ .init = &omap2_init_clksel_parent,
+ .clksel = pruss_ocp_clk_mux_sel,
+ .clksel_reg = AM33XX_CLKSEL_PRUSS_OCP_CLK,
+ .clksel_mask = AM33XX_CLKSEL_0_0_MASK,
+ .ops = &clkops_null,
+ .recalc = &followparent_recalc,
+};
+
+static const struct clksel lcd_clk_mux_sel[] = {
+ { .parent = &dpll_disp_m2_ck, .rates = div_1_0_rates },
+ { .parent = &dpll_core_m5_ck, .rates = div_1_1_rates },
+ { .parent = &dpll_per_m2_ck, .rates = div_1_2_rates },
+ { .parent = NULL },
+};
+
+static struct clk lcd_gclk = {
+ .name = "lcd_gclk",
+ .clkdm_name = "lcdc_clkdm",
+ .parent = &dpll_disp_m2_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel = lcd_clk_mux_sel,
+ .clksel_reg = AM33XX_CLKSEL_LCDC_PIXEL_CLK,
+ .clksel_mask = AM33XX_CLKSEL_0_1_MASK,
+ .ops = &clkops_null,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk mmc_clk = {
+ .name = "mmc_clk",
+ .clkdm_name = "l4ls_clkdm",
+ .parent = &dpll_per_m2_ck,
+ .ops = &clkops_null,
+ .fixed_div = 2,
+ .recalc = &omap_fixed_divisor_recalc,
+};
+
+static struct clk mmc2_fck = {
+ .name = "mmc2_fck",
+ .clkdm_name = "l3s_clkdm",
+ .parent = &mmc_clk,
+ .ops = &clkops_null,
+ .recalc = &followparent_recalc,
+};
+
+static const struct clksel gfx_clksel_sel[] = {
+ { .parent = &dpll_core_m4_ck, .rates = div_1_0_rates },
+ { .parent = &dpll_per_m2_ck, .rates = div_1_1_rates },
+ { .parent = NULL },
+};
+
+static struct clk gfx_fclk_clksel_ck = {
+ .name = "gfx_fclk_clksel_ck",
+ .parent = &dpll_core_m4_ck,
+ .clksel = gfx_clksel_sel,
+ .ops = &clkops_null,
+ .clksel_reg = AM33XX_CLKSEL_GFX_FCLK,
+ .clksel_mask = AM33XX_CLKSEL_GFX_FCLK_MASK,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate div_1_0_2_1_rates[] = {
+ { .div = 1, .val = 0, .flags = RATE_IN_AM33XX },
+ { .div = 2, .val = 1, .flags = RATE_IN_AM33XX },
+ { .div = 0 },
+};
+
+static const struct clksel gfx_div_sel[] = {
+ { .parent = &gfx_fclk_clksel_ck, .rates = div_1_0_2_1_rates },
+ { .parent = NULL },
+};
+
+static struct clk gfx_fck_div_ck = {
+ .name = "gfx_fck_div_ck",
+ .clkdm_name = "gfx_l3_clkdm",
+ .parent = &gfx_fclk_clksel_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel = gfx_div_sel,
+ .clksel_reg = AM33XX_CLKSEL_GFX_FCLK,
+ .clksel_mask = AM33XX_CLKSEL_0_0_MASK,
+ .recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate,
+ .ops = &clkops_null,
+};
+
+static const struct clksel sysclkout_pre_sel[] = {
+ { .parent = &clk_32768_ck, .rates = div_1_0_rates },
+ { .parent = &l3_gclk, .rates = div_1_1_rates },
+ { .parent = &dpll_ddr_m2_ck, .rates = div_1_2_rates },
+ { .parent = &dpll_per_m2_ck, .rates = div_1_3_rates },
+ { .parent = &lcd_gclk, .rates = div_1_4_rates },
+ { .parent = NULL },
+};
+
+static struct clk sysclkout_pre_ck = {
+ .name = "sysclkout_pre_ck",
+ .parent = &clk_32768_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel = sysclkout_pre_sel,
+ .clksel_reg = AM33XX_CM_CLKOUT_CTRL,
+ .clksel_mask = AM33XX_CLKOUT2SOURCE_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+};
+
+/* Divide by 8 clock rates with default clock is 1/1*/
+static const struct clksel_rate div8_rates[] = {
+ { .div = 1, .val = 0, .flags = RATE_IN_AM33XX },
+ { .div = 2, .val = 1, .flags = RATE_IN_AM33XX },
+ { .div = 3, .val = 2, .flags = RATE_IN_AM33XX },
+ { .div = 4, .val = 3, .flags = RATE_IN_AM33XX },
+ { .div = 5, .val = 4, .flags = RATE_IN_AM33XX },
+ { .div = 6, .val = 5, .flags = RATE_IN_AM33XX },
+ { .div = 7, .val = 6, .flags = RATE_IN_AM33XX },
+ { .div = 8, .val = 7, .flags = RATE_IN_AM33XX },
+ { .div = 0 },
+};
+
+static const struct clksel clkout2_div[] = {
+ { .parent = &sysclkout_pre_ck, .rates = div8_rates },
+ { .parent = NULL },
+};
+
+static struct clk clkout2_ck = {
+ .name = "clkout2_ck",
+ .parent = &sysclkout_pre_ck,
+ .ops = &clkops_omap2_dflt,
+ .clksel = clkout2_div,
+ .clksel_reg = AM33XX_CM_CLKOUT_CTRL,
+ .clksel_mask = AM33XX_CLKOUT2DIV_MASK,
+ .enable_reg = AM33XX_CM_CLKOUT_CTRL,
+ .enable_bit = AM33XX_CLKOUT2EN_SHIFT,
+ .recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate,
+};
+
+static const struct clksel wdt_clkmux_sel[] = {
+ { .parent = &clk_rc32k_ck, .rates = div_1_0_rates },
+ { .parent = &clkdiv32k_ick, .rates = div_1_1_rates },
+ { .parent = NULL },
+};
+
+static struct clk wdt1_fck = {
+ .name = "wdt1_fck",
+ .clkdm_name = "l4_wkup_clkdm",
+ .parent = &clk_rc32k_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel = wdt_clkmux_sel,
+ .clksel_reg = AM33XX_CLKSEL_WDT1_CLK,
+ .clksel_mask = AM33XX_CLKSEL_0_1_MASK,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+};
+
+/*
+ * clkdev
+ */
+static struct omap_clk am33xx_clks[] = {
+ CLK(NULL, "clk_32768_ck", &clk_32768_ck, CK_AM33XX),
+ CLK(NULL, "clk_rc32k_ck", &clk_rc32k_ck, CK_AM33XX),
+ CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_AM33XX),
+ CLK(NULL, "virt_24000000_ck", &virt_24000000_ck, CK_AM33XX),
+ CLK(NULL, "virt_25000000_ck", &virt_25000000_ck, CK_AM33XX),
+ CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_AM33XX),
+ CLK(NULL, "sys_clkin_ck", &sys_clkin_ck, CK_AM33XX),
+ CLK(NULL, "tclkin_ck", &tclkin_ck, CK_AM33XX),
+ CLK(NULL, "dpll_core_ck", &dpll_core_ck, CK_AM33XX),
+ CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck, CK_AM33XX),
+ CLK(NULL, "dpll_core_m4_ck", &dpll_core_m4_ck, CK_AM33XX),
+ CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck, CK_AM33XX),
+ CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck, CK_AM33XX),
+ CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_AM33XX),
+ CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_AM33XX),
+ CLK(NULL, "dpll_ddr_ck", &dpll_ddr_ck, CK_AM33XX),
+ CLK(NULL, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck, CK_AM33XX),
+ CLK(NULL, "dpll_ddr_m2_div2_ck", &dpll_ddr_m2_div2_ck, CK_AM33XX),
+ CLK(NULL, "dpll_disp_ck", &dpll_disp_ck, CK_AM33XX),
+ CLK(NULL, "dpll_disp_m2_ck", &dpll_disp_m2_ck, CK_AM33XX),
+ CLK(NULL, "dpll_per_ck", &dpll_per_ck, CK_AM33XX),
+ CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck, CK_AM33XX),
+ CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", &dpll_per_m2_div4_wkupdm_ck, CK_AM33XX),
+ CLK(NULL, "dpll_per_m2_div4_ck", &dpll_per_m2_div4_ck, CK_AM33XX),
+ CLK(NULL, "adc_tsc_fck", &adc_tsc_fck, CK_AM33XX),
+ CLK(NULL, "cefuse_fck", &cefuse_fck, CK_AM33XX),
+ CLK(NULL, "clkdiv32k_ick", &clkdiv32k_ick, CK_AM33XX),
+ CLK(NULL, "dcan0_fck", &dcan0_fck, CK_AM33XX),
+ CLK(NULL, "dcan1_fck", &dcan1_fck, CK_AM33XX),
+ CLK(NULL, "debugss_ick", &debugss_ick, CK_AM33XX),
+ CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk, CK_AM33XX),
+ CLK("davinci-mcasp.0", NULL, &mcasp0_fck, CK_AM33XX),
+ CLK("davinci-mcasp.1", NULL, &mcasp1_fck, CK_AM33XX),
+ CLK("NULL", "mmc2_fck", &mmc2_fck, CK_AM33XX),
+ CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX),
+ CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX),
+ CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX),
+ CLK(NULL, "gpt1_fck", &timer1_fck, CK_AM33XX),
+ CLK(NULL, "gpt2_fck", &timer2_fck, CK_AM33XX),
+ CLK(NULL, "gpt3_fck", &timer3_fck, CK_AM33XX),
+ CLK(NULL, "gpt4_fck", &timer4_fck, CK_AM33XX),
+ CLK(NULL, "gpt5_fck", &timer5_fck, CK_AM33XX),
+ CLK(NULL, "gpt6_fck", &timer6_fck, CK_AM33XX),
+ CLK(NULL, "gpt7_fck", &timer7_fck, CK_AM33XX),
+ CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX),
+ CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX),
+ CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX),
+ CLK(NULL, "l4_rtc_gclk", &l4_rtc_gclk, CK_AM33XX),
+ CLK(NULL, "l3_gclk", &l3_gclk, CK_AM33XX),
+ CLK(NULL, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck, CK_AM33XX),
+ CLK(NULL, "l4hs_gclk", &l4hs_gclk, CK_AM33XX),
+ CLK(NULL, "l3s_gclk", &l3s_gclk, CK_AM33XX),
+ CLK(NULL, "l4fw_gclk", &l4fw_gclk, CK_AM33XX),
+ CLK(NULL, "l4ls_gclk", &l4ls_gclk, CK_AM33XX),
+ CLK(NULL, "clk_24mhz", &clk_24mhz, CK_AM33XX),
+ CLK(NULL, "sysclk_div_ck", &sysclk_div_ck, CK_AM33XX),
+ CLK(NULL, "cpsw_125mhz_gclk", &cpsw_125mhz_gclk, CK_AM33XX),
+ CLK(NULL, "cpsw_cpts_rft_clk", &cpsw_cpts_rft_clk, CK_AM33XX),
+ CLK(NULL, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck, CK_AM33XX),
+ CLK(NULL, "gpio0_dbclk", &gpio0_dbclk, CK_AM33XX),
+ CLK(NULL, "gpio1_dbclk", &gpio1_dbclk, CK_AM33XX),
+ CLK(NULL, "gpio2_dbclk", &gpio2_dbclk, CK_AM33XX),
+ CLK(NULL, "gpio3_dbclk", &gpio3_dbclk, CK_AM33XX),
+ CLK(NULL, "lcd_gclk", &lcd_gclk, CK_AM33XX),
+ CLK(NULL, "mmc_clk", &mmc_clk, CK_AM33XX),
+ CLK(NULL, "gfx_fclk_clksel_ck", &gfx_fclk_clksel_ck, CK_AM33XX),
+ CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX),
+ CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX),
+ CLK(NULL, "clkout2_ck", &clkout2_ck, CK_AM33XX),
+};
+
+int __init am33xx_clk_init(void)
+{
+ struct omap_clk *c;
+ u32 cpu_clkflg;
+
+ if (soc_is_am33xx()) {
+ cpu_mask = RATE_IN_AM33XX;
+ cpu_clkflg = CK_AM33XX;
+ }
+
+ clk_init(&omap2_clk_functions);
+
+ for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++)
+ clk_preinit(c->lk.clk);
+
+ for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++) {
+ if (c->cpu & cpu_clkflg) {
+ clkdev_add(&c->lk);
+ clk_register(c->lk.clk);
+ omap2_init_clk_clkdm(c->lk.clk);
+ }
+ }
+
+ recalculate_root_clocks();
+
+ /*
+ * Only enable those clocks we will need, let the drivers
+ * enable other clocks as necessary
+ */
+ clk_enable_init_clocks();
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 4e1a3b0..91b3d5c 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -93,18 +93,6 @@
.rate = 16800000,
};
-static struct clk virt_19_2m_ck = {
- .name = "virt_19_2m_ck",
- .ops = &clkops_null,
- .rate = 19200000,
-};
-
-static struct clk virt_26m_ck = {
- .name = "virt_26m_ck",
- .ops = &clkops_null,
- .rate = 26000000,
-};
-
static struct clk virt_38_4m_ck = {
.name = "virt_38_4m_ck",
.ops = &clkops_null,
@@ -145,8 +133,8 @@
{ .parent = &virt_12m_ck, .rates = osc_sys_12m_rates },
{ .parent = &virt_13m_ck, .rates = osc_sys_13m_rates },
{ .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates },
- { .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates },
- { .parent = &virt_26m_ck, .rates = osc_sys_26m_rates },
+ { .parent = &virt_19200000_ck, .rates = osc_sys_19_2m_rates },
+ { .parent = &virt_26000000_ck, .rates = osc_sys_26m_rates },
{ .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates },
{ .parent = NULL },
};
@@ -2490,13 +2478,13 @@
};
static struct clk uart4_fck_am35xx = {
- .name = "uart4_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &per_48m_fck,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP3430_EN_UART4_SHIFT,
- .clkdm_name = "core_l4_clkdm",
- .recalc = &followparent_recalc,
+ .name = "uart4_fck",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &core_48m_fck,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+ .enable_bit = AM35XX_EN_UART4_SHIFT,
+ .clkdm_name = "core_l4_clkdm",
+ .recalc = &followparent_recalc,
};
static struct clk gpt2_fck = {
@@ -3201,8 +3189,12 @@
};
/*
- * The UART1/2 functional clock acts as the functional
- * clock for UART4. No separate fclk control available.
+ * The UART1/2 functional clock acts as the functional clock for
+ * UART4. No separate fclk control available. XXX Well now we have a
+ * uart4_fck that is apparently used as the UART4 functional clock,
+ * but it also seems that uart1_fck or uart2_fck are still needed, at
+ * least for UART4 softresets to complete. This really needs
+ * clarification.
*/
static struct clk uart4_ick_am35xx = {
.name = "uart4_ick",
@@ -3230,17 +3222,12 @@
CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_3XXX),
CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_3XXX),
CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK(NULL, "virt_19_2m_ck", &virt_19_2m_ck, CK_3XXX),
- CLK(NULL, "virt_26m_ck", &virt_26m_ck, CK_3XXX),
+ CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_3XXX),
+ CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_3XXX),
CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX),
CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_3XXX),
CLK(NULL, "sys_ck", &sys_ck, CK_3XXX),
CLK(NULL, "sys_altclk", &sys_altclk, CK_3XXX),
- CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_3XXX),
- CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_3XXX),
- CLK("omap-mcbsp.3", "pad_fck", &mcbsp_clks, CK_3XXX),
- CLK("omap-mcbsp.4", "pad_fck", &mcbsp_clks, CK_3XXX),
- CLK("omap-mcbsp.5", "pad_fck", &mcbsp_clks, CK_3XXX),
CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_3XXX),
CLK(NULL, "sys_clkout1", &sys_clkout1, CK_3XXX),
CLK(NULL, "dpll1_ck", &dpll1_ck, CK_3XXX),
@@ -3307,8 +3294,6 @@
CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK("usbhs_omap", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX),
- CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX),
CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX),
CLK(NULL, "mmchs3_fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_3XXX),
@@ -3413,9 +3398,6 @@
CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX),
CLK(NULL, "gpt12_ick", &gpt12_ick, CK_3XXX),
CLK(NULL, "gpt1_ick", &gpt1_ick, CK_3XXX),
- CLK("omap-mcbsp.2", "prcm_fck", &per_96m_fck, CK_3XXX),
- CLK("omap-mcbsp.3", "prcm_fck", &per_96m_fck, CK_3XXX),
- CLK("omap-mcbsp.4", "prcm_fck", &per_96m_fck, CK_3XXX),
CLK(NULL, "per_96m_fck", &per_96m_fck, CK_3XXX),
CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX),
CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX),
@@ -3474,38 +3456,16 @@
CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX),
CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX),
CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX),
- CLK("davinci_emac", NULL, &emac_ick, CK_AM35XX),
+ CLK("davinci_emac.0", NULL, &emac_ick, CK_AM35XX),
CLK("davinci_mdio.0", NULL, &emac_fck, CK_AM35XX),
CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX),
CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX),
- CLK("musb-am35x", "ick", &hsotgusb_ick_am35xx, CK_AM35XX),
- CLK("musb-am35x", "fck", &hsotgusb_fck_am35xx, CK_AM35XX),
+ CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_am35xx, CK_AM35XX),
+ CLK(NULL, "hsotgusb_fck", &hsotgusb_fck_am35xx, CK_AM35XX),
CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX),
CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX),
- CLK("omap_timer.1", "32k_ck", &omap_32k_fck, CK_3XXX),
- CLK("omap_timer.2", "32k_ck", &omap_32k_fck, CK_3XXX),
- CLK("omap_timer.3", "32k_ck", &omap_32k_fck, CK_3XXX),
- CLK("omap_timer.4", "32k_ck", &omap_32k_fck, CK_3XXX),
- CLK("omap_timer.5", "32k_ck", &omap_32k_fck, CK_3XXX),
- CLK("omap_timer.6", "32k_ck", &omap_32k_fck, CK_3XXX),
- CLK("omap_timer.7", "32k_ck", &omap_32k_fck, CK_3XXX),
- CLK("omap_timer.8", "32k_ck", &omap_32k_fck, CK_3XXX),
- CLK("omap_timer.9", "32k_ck", &omap_32k_fck, CK_3XXX),
- CLK("omap_timer.10", "32k_ck", &omap_32k_fck, CK_3XXX),
- CLK("omap_timer.11", "32k_ck", &omap_32k_fck, CK_3XXX),
- CLK("omap_timer.12", "32k_ck", &omap_32k_fck, CK_3XXX),
- CLK("omap_timer.1", "sys_ck", &sys_ck, CK_3XXX),
- CLK("omap_timer.2", "sys_ck", &sys_ck, CK_3XXX),
- CLK("omap_timer.3", "sys_ck", &sys_ck, CK_3XXX),
- CLK("omap_timer.4", "sys_ck", &sys_ck, CK_3XXX),
- CLK("omap_timer.5", "sys_ck", &sys_ck, CK_3XXX),
- CLK("omap_timer.6", "sys_ck", &sys_ck, CK_3XXX),
- CLK("omap_timer.7", "sys_ck", &sys_ck, CK_3XXX),
- CLK("omap_timer.8", "sys_ck", &sys_ck, CK_3XXX),
- CLK("omap_timer.9", "sys_ck", &sys_ck, CK_3XXX),
- CLK("omap_timer.10", "sys_ck", &sys_ck, CK_3XXX),
- CLK("omap_timer.11", "sys_ck", &sys_ck, CK_3XXX),
- CLK("omap_timer.12", "sys_ck", &sys_ck, CK_3XXX),
+ CLK(NULL, "timer_32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK(NULL, "timer_sys_ck", &sys_ck, CK_3XXX),
};
@@ -3514,7 +3474,7 @@
struct omap_clk *c;
u32 cpu_clkflg = 0;
- if (cpu_is_omap3517()) {
+ if (soc_is_am35xx()) {
cpu_mask = RATE_IN_34XX;
cpu_clkflg = CK_AM35XX;
} else if (cpu_is_omap3630()) {
@@ -3523,7 +3483,7 @@
} else if (cpu_is_ti816x()) {
cpu_mask = RATE_IN_TI816X;
cpu_clkflg = CK_TI816X;
- } else if (cpu_is_am33xx()) {
+ } else if (soc_is_am33xx()) {
cpu_mask = RATE_IN_AM33XX;
} else if (cpu_is_ti814x()) {
cpu_mask = RATE_IN_TI814X;
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 2172f66..d7f55e4 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -84,6 +84,7 @@
static struct clk sys_32k_ck = {
.name = "sys_32k_ck",
+ .clkdm_name = "prm_clkdm",
.rate = 32768,
.ops = &clkops_null,
};
@@ -106,18 +107,6 @@
.rate = 16800000,
};
-static struct clk virt_19200000_ck = {
- .name = "virt_19200000_ck",
- .ops = &clkops_null,
- .rate = 19200000,
-};
-
-static struct clk virt_26000000_ck = {
- .name = "virt_26000000_ck",
- .ops = &clkops_null,
- .rate = 26000000,
-};
-
static struct clk virt_27000000_ck = {
.name = "virt_27000000_ck",
.ops = &clkops_null,
@@ -130,31 +119,6 @@
.rate = 38400000,
};
-static const struct clksel_rate div_1_0_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_4430 },
- { .div = 0 },
-};
-
-static const struct clksel_rate div_1_1_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_4430 },
- { .div = 0 },
-};
-
-static const struct clksel_rate div_1_2_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_4430 },
- { .div = 0 },
-};
-
-static const struct clksel_rate div_1_3_rates[] = {
- { .div = 1, .val = 3, .flags = RATE_IN_4430 },
- { .div = 0 },
-};
-
-static const struct clksel_rate div_1_4_rates[] = {
- { .div = 1, .val = 4, .flags = RATE_IN_4430 },
- { .div = 0 },
-};
-
static const struct clksel_rate div_1_5_rates[] = {
{ .div = 1, .val = 5, .flags = RATE_IN_4430 },
{ .div = 0 },
@@ -288,41 +252,6 @@
.recalc = &omap3_clkoutx2_recalc,
};
-static const struct clksel_rate div31_1to31_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_4430 },
- { .div = 2, .val = 2, .flags = RATE_IN_4430 },
- { .div = 3, .val = 3, .flags = RATE_IN_4430 },
- { .div = 4, .val = 4, .flags = RATE_IN_4430 },
- { .div = 5, .val = 5, .flags = RATE_IN_4430 },
- { .div = 6, .val = 6, .flags = RATE_IN_4430 },
- { .div = 7, .val = 7, .flags = RATE_IN_4430 },
- { .div = 8, .val = 8, .flags = RATE_IN_4430 },
- { .div = 9, .val = 9, .flags = RATE_IN_4430 },
- { .div = 10, .val = 10, .flags = RATE_IN_4430 },
- { .div = 11, .val = 11, .flags = RATE_IN_4430 },
- { .div = 12, .val = 12, .flags = RATE_IN_4430 },
- { .div = 13, .val = 13, .flags = RATE_IN_4430 },
- { .div = 14, .val = 14, .flags = RATE_IN_4430 },
- { .div = 15, .val = 15, .flags = RATE_IN_4430 },
- { .div = 16, .val = 16, .flags = RATE_IN_4430 },
- { .div = 17, .val = 17, .flags = RATE_IN_4430 },
- { .div = 18, .val = 18, .flags = RATE_IN_4430 },
- { .div = 19, .val = 19, .flags = RATE_IN_4430 },
- { .div = 20, .val = 20, .flags = RATE_IN_4430 },
- { .div = 21, .val = 21, .flags = RATE_IN_4430 },
- { .div = 22, .val = 22, .flags = RATE_IN_4430 },
- { .div = 23, .val = 23, .flags = RATE_IN_4430 },
- { .div = 24, .val = 24, .flags = RATE_IN_4430 },
- { .div = 25, .val = 25, .flags = RATE_IN_4430 },
- { .div = 26, .val = 26, .flags = RATE_IN_4430 },
- { .div = 27, .val = 27, .flags = RATE_IN_4430 },
- { .div = 28, .val = 28, .flags = RATE_IN_4430 },
- { .div = 29, .val = 29, .flags = RATE_IN_4430 },
- { .div = 30, .val = 30, .flags = RATE_IN_4430 },
- { .div = 31, .val = 31, .flags = RATE_IN_4430 },
- { .div = 0 },
-};
-
static const struct clksel dpll_abe_m2x2_div[] = {
{ .parent = &dpll_abe_x2_ck, .rates = div31_1to31_rates },
{ .parent = NULL },
@@ -512,6 +441,7 @@
.name = "ddrphy_ck",
.parent = &dpll_core_m2_ck,
.ops = &clkops_null,
+ .clkdm_name = "l3_emif_clkdm",
.fixed_div = 2,
.recalc = &omap_fixed_divisor_recalc,
};
@@ -769,6 +699,7 @@
static struct clk dpll_mpu_m2_ck = {
.name = "dpll_mpu_m2_ck",
.parent = &dpll_mpu_ck,
+ .clkdm_name = "cm_clkdm",
.clksel = dpll_mpu_m2_div,
.clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU,
.clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK,
@@ -1149,6 +1080,7 @@
static struct clk l3_div_ck = {
.name = "l3_div_ck",
.parent = &div_core_ck,
+ .clkdm_name = "cm_clkdm",
.clksel = l3_div_div,
.clksel_reg = OMAP4430_CM_CLKSEL_CORE,
.clksel_mask = OMAP4430_CLKSEL_L3_MASK,
@@ -2824,6 +2756,7 @@
static struct clk trace_clk_div_ck = {
.name = "trace_clk_div_ck",
.parent = &pmd_trace_clk_mux_ck,
+ .clkdm_name = "emu_sys_clkdm",
.clksel = trace_clk_div_div,
.clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
.clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
@@ -3294,17 +3227,17 @@
CLK(NULL, "smartreflex_core_fck", &smartreflex_core_fck, CK_443X),
CLK(NULL, "smartreflex_iva_fck", &smartreflex_iva_fck, CK_443X),
CLK(NULL, "smartreflex_mpu_fck", &smartreflex_mpu_fck, CK_443X),
- CLK(NULL, "gpt1_fck", &timer1_fck, CK_443X),
- CLK(NULL, "gpt10_fck", &timer10_fck, CK_443X),
- CLK(NULL, "gpt11_fck", &timer11_fck, CK_443X),
- CLK(NULL, "gpt2_fck", &timer2_fck, CK_443X),
- CLK(NULL, "gpt3_fck", &timer3_fck, CK_443X),
- CLK(NULL, "gpt4_fck", &timer4_fck, CK_443X),
- CLK(NULL, "gpt5_fck", &timer5_fck, CK_443X),
- CLK(NULL, "gpt6_fck", &timer6_fck, CK_443X),
- CLK(NULL, "gpt7_fck", &timer7_fck, CK_443X),
- CLK(NULL, "gpt8_fck", &timer8_fck, CK_443X),
- CLK(NULL, "gpt9_fck", &timer9_fck, CK_443X),
+ CLK(NULL, "timer1_fck", &timer1_fck, CK_443X),
+ CLK(NULL, "timer10_fck", &timer10_fck, CK_443X),
+ CLK(NULL, "timer11_fck", &timer11_fck, CK_443X),
+ CLK(NULL, "timer2_fck", &timer2_fck, CK_443X),
+ CLK(NULL, "timer3_fck", &timer3_fck, CK_443X),
+ CLK(NULL, "timer4_fck", &timer4_fck, CK_443X),
+ CLK(NULL, "timer5_fck", &timer5_fck, CK_443X),
+ CLK(NULL, "timer6_fck", &timer6_fck, CK_443X),
+ CLK(NULL, "timer7_fck", &timer7_fck, CK_443X),
+ CLK(NULL, "timer8_fck", &timer8_fck, CK_443X),
+ CLK(NULL, "timer9_fck", &timer9_fck, CK_443X),
CLK(NULL, "uart1_fck", &uart1_fck, CK_443X),
CLK(NULL, "uart2_fck", &uart2_fck, CK_443X),
CLK(NULL, "uart3_fck", &uart3_fck, CK_443X),
@@ -3380,28 +3313,18 @@
CLK("usbhs_omap", "usbhost_ick", &dummy_ck, CK_443X),
CLK("usbhs_omap", "usbtll_fck", &dummy_ck, CK_443X),
CLK("omap_wdt", "ick", &dummy_ck, CK_443X),
- CLK("omap_timer.1", "32k_ck", &sys_32k_ck, CK_443X),
- CLK("omap_timer.2", "32k_ck", &sys_32k_ck, CK_443X),
- CLK("omap_timer.3", "32k_ck", &sys_32k_ck, CK_443X),
- CLK("omap_timer.4", "32k_ck", &sys_32k_ck, CK_443X),
- CLK("omap_timer.5", "32k_ck", &sys_32k_ck, CK_443X),
- CLK("omap_timer.6", "32k_ck", &sys_32k_ck, CK_443X),
- CLK("omap_timer.7", "32k_ck", &sys_32k_ck, CK_443X),
- CLK("omap_timer.8", "32k_ck", &sys_32k_ck, CK_443X),
- CLK("omap_timer.9", "32k_ck", &sys_32k_ck, CK_443X),
- CLK("omap_timer.10", "32k_ck", &sys_32k_ck, CK_443X),
- CLK("omap_timer.11", "32k_ck", &sys_32k_ck, CK_443X),
- CLK("omap_timer.1", "sys_ck", &sys_clkin_ck, CK_443X),
- CLK("omap_timer.2", "sys_ck", &sys_clkin_ck, CK_443X),
- CLK("omap_timer.3", "sys_ck", &sys_clkin_ck, CK_443X),
- CLK("omap_timer.4", "sys_ck", &sys_clkin_ck, CK_443X),
- CLK("omap_timer.9", "sys_ck", &sys_clkin_ck, CK_443X),
- CLK("omap_timer.10", "sys_ck", &sys_clkin_ck, CK_443X),
- CLK("omap_timer.11", "sys_ck", &sys_clkin_ck, CK_443X),
- CLK("omap_timer.5", "sys_ck", &syc_clk_div_ck, CK_443X),
- CLK("omap_timer.6", "sys_ck", &syc_clk_div_ck, CK_443X),
- CLK("omap_timer.7", "sys_ck", &syc_clk_div_ck, CK_443X),
- CLK("omap_timer.8", "sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK(NULL, "timer_32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.1", "timer_sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.2", "timer_sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.3", "timer_sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.4", "timer_sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.9", "timer_sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.10", "timer_sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.11", "timer_sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.5", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("omap_timer.6", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("omap_timer.7", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("omap_timer.8", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
};
int __init omap4xxx_clk_init(void)
@@ -3412,9 +3335,12 @@
if (cpu_is_omap443x()) {
cpu_mask = RATE_IN_4430;
cpu_clkflg = CK_443X;
- } else if (cpu_is_omap446x()) {
+ } else if (cpu_is_omap446x() || cpu_is_omap447x()) {
cpu_mask = RATE_IN_4460 | RATE_IN_4430;
cpu_clkflg = CK_446X | CK_443X;
+
+ if (cpu_is_omap447x())
+ pr_warn("WARNING: OMAP4470 clock data incomplete!\n");
} else {
return 0;
}
diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c
index 6424d46..b9f3ba6 100644
--- a/arch/arm/mach-omap2/clock_common_data.c
+++ b/arch/arm/mach-omap2/clock_common_data.c
@@ -43,3 +43,80 @@
{ .div = 3, .val = 3, .flags = RATE_IN_243X },
{ .div = 0 },
};
+
+
+/* clksel_rate blocks shared between OMAP44xx and AM33xx */
+
+const struct clksel_rate div_1_0_rates[] = {
+ { .div = 1, .val = 0, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 0 },
+};
+
+const struct clksel_rate div_1_1_rates[] = {
+ { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 0 },
+};
+
+const struct clksel_rate div_1_2_rates[] = {
+ { .div = 1, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 0 },
+};
+
+const struct clksel_rate div_1_3_rates[] = {
+ { .div = 1, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 0 },
+};
+
+const struct clksel_rate div_1_4_rates[] = {
+ { .div = 1, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 0 },
+};
+
+const struct clksel_rate div31_1to31_rates[] = {
+ { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 2, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 3, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 4, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 5, .val = 5, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 6, .val = 6, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 7, .val = 7, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 8, .val = 8, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 9, .val = 9, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 10, .val = 10, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 11, .val = 11, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 12, .val = 12, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 13, .val = 13, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 14, .val = 14, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 15, .val = 15, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 16, .val = 16, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 17, .val = 17, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 18, .val = 18, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 19, .val = 19, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 20, .val = 20, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 21, .val = 21, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 22, .val = 22, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 23, .val = 23, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 24, .val = 24, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 25, .val = 25, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 26, .val = 26, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 27, .val = 27, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 28, .val = 28, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 29, .val = 29, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 30, .val = 30, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 31, .val = 31, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
+ { .div = 0 },
+};
+
+/* Clocks shared between various OMAP SoCs */
+
+struct clk virt_19200000_ck = {
+ .name = "virt_19200000_ck",
+ .ops = &clkops_null,
+ .rate = 19200000,
+};
+
+struct clk virt_26000000_ck = {
+ .name = "virt_26000000_ck",
+ .ops = &clkops_null,
+ .rate = 26000000,
+};
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index f7b58609..5601dc1 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -31,12 +31,16 @@
*
* CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this
* clockdomain. (Currently, this applies to OMAP3 clockdomains only.)
+ * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is
+ * active whenever the MPU is active. True for interconnects and
+ * the WKUP clockdomains.
*/
#define CLKDM_CAN_FORCE_SLEEP (1 << 0)
#define CLKDM_CAN_FORCE_WAKEUP (1 << 1)
#define CLKDM_CAN_ENABLE_AUTO (1 << 2)
#define CLKDM_CAN_DISABLE_AUTO (1 << 3)
#define CLKDM_NO_AUTODEPS (1 << 4)
+#define CLKDM_ACTIVE_WITH_MPU (1 << 5)
#define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
#define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
@@ -195,6 +199,7 @@
extern void __init omap242x_clockdomains_init(void);
extern void __init omap243x_clockdomains_init(void);
extern void __init omap3xxx_clockdomains_init(void);
+extern void __init am33xx_clockdomains_init(void);
extern void __init omap44xx_clockdomains_init(void);
extern void _clkdm_add_autodeps(struct clockdomain *clkdm);
extern void _clkdm_del_autodeps(struct clockdomain *clkdm);
@@ -202,11 +207,10 @@
extern struct clkdm_ops omap2_clkdm_operations;
extern struct clkdm_ops omap3_clkdm_operations;
extern struct clkdm_ops omap4_clkdm_operations;
+extern struct clkdm_ops am33xx_clkdm_operations;
extern struct clkdm_dep gfx_24xx_wkdeps[];
extern struct clkdm_dep dsp_24xx_wkdeps[];
extern struct clockdomain wkup_common_clkdm;
-extern struct clockdomain prm_common_clkdm;
-extern struct clockdomain cm_common_clkdm;
#endif
diff --git a/arch/arm/mach-omap2/clockdomain33xx.c b/arch/arm/mach-omap2/clockdomain33xx.c
new file mode 100644
index 0000000..aca6388
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomain33xx.c
@@ -0,0 +1,74 @@
+/*
+ * AM33XX clockdomain control
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Derived from mach-omap2/clockdomain44xx.c written by Rajendra Nayak
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+
+#include "clockdomain.h"
+#include "cm33xx.h"
+
+
+static int am33xx_clkdm_sleep(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static int am33xx_clkdm_wakeup(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ return am33xx_clkdm_wakeup(clkdm);
+
+ return 0;
+}
+
+static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+
+ if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
+ am33xx_clkdm_sleep(clkdm);
+
+ return 0;
+}
+
+struct clkdm_ops am33xx_clkdm_operations = {
+ .clkdm_sleep = am33xx_clkdm_sleep,
+ .clkdm_wakeup = am33xx_clkdm_wakeup,
+ .clkdm_allow_idle = am33xx_clkdm_allow_idle,
+ .clkdm_deny_idle = am33xx_clkdm_deny_idle,
+ .clkdm_clk_enable = am33xx_clkdm_clk_enable,
+ .clkdm_clk_disable = am33xx_clkdm_clk_disable,
+};
diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c
index 4f04dd1..762f2cc 100644
--- a/arch/arm/mach-omap2/clockdomain44xx.c
+++ b/arch/arm/mach-omap2/clockdomain44xx.c
@@ -70,7 +70,7 @@
static int omap4_clkdm_sleep(struct clockdomain *clkdm)
{
- omap4_cminst_clkdm_force_sleep(clkdm->prcm_partition,
+ omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
return 0;
}
@@ -90,8 +90,12 @@
static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
{
- omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
- clkdm->cm_inst, clkdm->clkdm_offs);
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ omap4_clkdm_wakeup(clkdm);
+ else
+ omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
+ clkdm->cm_inst,
+ clkdm->clkdm_offs);
}
static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)
diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c
index 0ab8e46..5c74185 100644
--- a/arch/arm/mach-omap2/clockdomains2420_data.c
+++ b/arch/arm/mach-omap2/clockdomains2420_data.c
@@ -131,8 +131,6 @@
static struct clockdomain *clockdomains_omap242x[] __initdata = {
&wkup_common_clkdm,
- &cm_common_clkdm,
- &prm_common_clkdm,
&mpu_2420_clkdm,
&iva1_2420_clkdm,
&dsp_2420_clkdm,
diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c
index 3645ed0..f096175 100644
--- a/arch/arm/mach-omap2/clockdomains2430_data.c
+++ b/arch/arm/mach-omap2/clockdomains2430_data.c
@@ -157,8 +157,6 @@
static struct clockdomain *clockdomains_omap243x[] __initdata = {
&wkup_common_clkdm,
- &cm_common_clkdm,
- &prm_common_clkdm,
&mpu_2430_clkdm,
&mdm_clkdm,
&dsp_2430_clkdm,
diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
index 839145e1..4972219 100644
--- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
@@ -88,4 +88,5 @@
.name = "wkup_clkdm",
.pwrdm = { .name = "wkup_pwrdm" },
.dep_bit = OMAP_EN_WKUP_SHIFT,
+ .flags = CLKDM_ACTIVE_WITH_MPU,
};
diff --git a/arch/arm/mach-omap2/clockdomains33xx_data.c b/arch/arm/mach-omap2/clockdomains33xx_data.c
new file mode 100644
index 0000000..32c90fd
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains33xx_data.c
@@ -0,0 +1,196 @@
+/*
+ * AM33XX Clock Domain data.
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "cm.h"
+#include "cm33xx.h"
+#include "cm-regbits-33xx.h"
+
+static struct clockdomain l4ls_am33xx_clkdm = {
+ .name = "l4ls_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3s_am33xx_clkdm = {
+ .name = "l3s_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_L3S_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4fw_am33xx_clkdm = {
+ .name = "l4fw_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_L4FW_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3_am33xx_clkdm = {
+ .name = "l3_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_L3_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4hs_am33xx_clkdm = {
+ .name = "l4hs_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_L4HS_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain ocpwp_l3_am33xx_clkdm = {
+ .name = "ocpwp_l3_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain pruss_ocp_am33xx_clkdm = {
+ .name = "pruss_ocp_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_PRUSS_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain cpsw_125mhz_am33xx_clkdm = {
+ .name = "cpsw_125mhz_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_CPSW_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain lcdc_am33xx_clkdm = {
+ .name = "lcdc_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_LCDC_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain clk_24mhz_am33xx_clkdm = {
+ .name = "clk_24mhz_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .cm_inst = AM33XX_CM_PER_MOD,
+ .clkdm_offs = AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_wkup_am33xx_clkdm = {
+ .name = "l4_wkup_clkdm",
+ .pwrdm = { .name = "wkup_pwrdm" },
+ .cm_inst = AM33XX_CM_WKUP_MOD,
+ .clkdm_offs = AM33XX_CM_WKUP_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3_aon_am33xx_clkdm = {
+ .name = "l3_aon_clkdm",
+ .pwrdm = { .name = "wkup_pwrdm" },
+ .cm_inst = AM33XX_CM_WKUP_MOD,
+ .clkdm_offs = AM33XX_CM_L3_AON_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_wkup_aon_am33xx_clkdm = {
+ .name = "l4_wkup_aon_clkdm",
+ .pwrdm = { .name = "wkup_pwrdm" },
+ .cm_inst = AM33XX_CM_WKUP_MOD,
+ .clkdm_offs = AM33XX_CM_L4_WKUP_AON_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain mpu_am33xx_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .cm_inst = AM33XX_CM_MPU_MOD,
+ .clkdm_offs = AM33XX_CM_MPU_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_rtc_am33xx_clkdm = {
+ .name = "l4_rtc_clkdm",
+ .pwrdm = { .name = "rtc_pwrdm" },
+ .cm_inst = AM33XX_CM_RTC_MOD,
+ .clkdm_offs = AM33XX_CM_RTC_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain gfx_l3_am33xx_clkdm = {
+ .name = "gfx_l3_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .cm_inst = AM33XX_CM_GFX_MOD,
+ .clkdm_offs = AM33XX_CM_GFX_L3_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain gfx_l4ls_gfx_am33xx_clkdm = {
+ .name = "gfx_l4ls_gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .cm_inst = AM33XX_CM_GFX_MOD,
+ .clkdm_offs = AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_cefuse_am33xx_clkdm = {
+ .name = "l4_cefuse_clkdm",
+ .pwrdm = { .name = "cefuse_pwrdm" },
+ .cm_inst = AM33XX_CM_CEFUSE_MOD,
+ .clkdm_offs = AM33XX_CM_CEFUSE_CLKSTCTRL_OFFSET,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain *clockdomains_am33xx[] __initdata = {
+ &l4ls_am33xx_clkdm,
+ &l3s_am33xx_clkdm,
+ &l4fw_am33xx_clkdm,
+ &l3_am33xx_clkdm,
+ &l4hs_am33xx_clkdm,
+ &ocpwp_l3_am33xx_clkdm,
+ &pruss_ocp_am33xx_clkdm,
+ &cpsw_125mhz_am33xx_clkdm,
+ &lcdc_am33xx_clkdm,
+ &clk_24mhz_am33xx_clkdm,
+ &l4_wkup_am33xx_clkdm,
+ &l3_aon_am33xx_clkdm,
+ &l4_wkup_aon_am33xx_clkdm,
+ &mpu_am33xx_clkdm,
+ &l4_rtc_am33xx_clkdm,
+ &gfx_l3_am33xx_clkdm,
+ &gfx_l4ls_gfx_am33xx_clkdm,
+ &l4_cefuse_am33xx_clkdm,
+ NULL,
+};
+
+void __init am33xx_clockdomains_init(void)
+{
+ clkdm_register_platform_funcs(&am33xx_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_am33xx);
+ clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c
index 6038adb..56089c4 100644
--- a/arch/arm/mach-omap2/clockdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c
@@ -59,6 +59,12 @@
{ NULL },
};
+static struct clkdm_dep gfx_sgx_am35x_wkdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */
static struct clkdm_dep per_wkdeps[] = {
{ .clkdm_name = "core_l3_clkdm" },
@@ -69,6 +75,14 @@
{ NULL },
};
+static struct clkdm_dep per_am35x_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */
static struct clkdm_dep usbhost_wkdeps[] = {
{ .clkdm_name = "core_l3_clkdm" },
@@ -79,6 +93,14 @@
{ NULL },
};
+static struct clkdm_dep usbhost_am35x_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */
static struct clkdm_dep mpu_3xxx_wkdeps[] = {
{ .clkdm_name = "core_l3_clkdm" },
@@ -89,6 +111,14 @@
{ NULL },
};
+static struct clkdm_dep mpu_am35x_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "dss_clkdm" },
+ { .clkdm_name = "per_clkdm" },
+ { NULL },
+};
+
/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */
static struct clkdm_dep iva2_wkdeps[] = {
{ .clkdm_name = "core_l3_clkdm" },
@@ -116,6 +146,12 @@
{ NULL },
};
+static struct clkdm_dep dss_am35x_wkdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
/* 3430: PM_WKDEP_NEON: MPU */
static struct clkdm_dep neon_wkdeps[] = {
{ .clkdm_name = "mpu_clkdm" },
@@ -131,6 +167,11 @@
{ NULL },
};
+static struct clkdm_dep dss_am35x_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
/* 3430: CM_SLEEPDEP_PER: MPU, IVA */
static struct clkdm_dep per_sleepdeps[] = {
{ .clkdm_name = "mpu_clkdm" },
@@ -138,6 +179,11 @@
{ NULL },
};
+static struct clkdm_dep per_am35x_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */
static struct clkdm_dep usbhost_sleepdeps[] = {
{ .clkdm_name = "mpu_clkdm" },
@@ -145,6 +191,11 @@
{ NULL },
};
+static struct clkdm_dep usbhost_am35x_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
/* 3430: CM_SLEEPDEP_CAM: MPU */
static struct clkdm_dep cam_sleepdeps[] = {
{ .clkdm_name = "mpu_clkdm" },
@@ -175,6 +226,15 @@
.clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
};
+static struct clockdomain mpu_am35x_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
+ .dep_bit = OMAP3430_EN_MPU_SHIFT,
+ .wkdep_srcs = mpu_am35x_wkdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
+};
+
static struct clockdomain neon_clkdm = {
.name = "neon_clkdm",
.pwrdm = { .name = "neon_pwrdm" },
@@ -210,6 +270,15 @@
.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
};
+static struct clockdomain sgx_am35x_clkdm = {
+ .name = "sgx_clkdm",
+ .pwrdm = { .name = "sgx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_sgx_am35x_wkdeps,
+ .sleepdep_srcs = gfx_sgx_sleepdeps,
+ .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
+};
+
/*
* The die-to-die clockdomain was documented in the 34xx ES1 TRM, but
* then that information was removed from the 34xx ES2+ TRM. It is
@@ -261,6 +330,16 @@
.clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
};
+static struct clockdomain dss_am35x_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "dss_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
+ .wkdep_srcs = dss_am35x_wkdeps,
+ .sleepdep_srcs = dss_am35x_sleepdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
+};
+
static struct clockdomain cam_clkdm = {
.name = "cam_clkdm",
.pwrdm = { .name = "cam_pwrdm" },
@@ -279,6 +358,15 @@
.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
};
+static struct clockdomain usbhost_am35x_clkdm = {
+ .name = "usbhost_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = usbhost_am35x_wkdeps,
+ .sleepdep_srcs = usbhost_am35x_sleepdeps,
+ .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
+};
+
static struct clockdomain per_clkdm = {
.name = "per_clkdm",
.pwrdm = { .name = "per_pwrdm" },
@@ -289,6 +377,16 @@
.clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
};
+static struct clockdomain per_am35x_clkdm = {
+ .name = "per_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP3430_EN_PER_SHIFT,
+ .wkdep_srcs = per_am35x_wkdeps,
+ .sleepdep_srcs = per_am35x_sleepdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
+};
+
/*
* Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
* switched of even if sdti is in use
@@ -341,28 +439,39 @@
}
};
+static struct clkdm_autodep clkdm_am35x_autodeps[] = {
+ {
+ .clkdm = { .name = "mpu_clkdm" },
+ },
+ {
+ .clkdm = { .name = NULL },
+ }
+};
+
/*
*
*/
-static struct clockdomain *clockdomains_omap3430_common[] __initdata = {
+static struct clockdomain *clockdomains_common[] __initdata = {
&wkup_common_clkdm,
- &cm_common_clkdm,
- &prm_common_clkdm,
- &mpu_3xxx_clkdm,
&neon_clkdm,
- &iva2_clkdm,
- &d2d_clkdm,
&core_l3_3xxx_clkdm,
&core_l4_3xxx_clkdm,
+ &emu_clkdm,
+ &dpll1_clkdm,
+ &dpll3_clkdm,
+ &dpll4_clkdm,
+ NULL
+};
+
+static struct clockdomain *clockdomains_omap3430[] __initdata = {
+ &mpu_3xxx_clkdm,
+ &iva2_clkdm,
+ &d2d_clkdm,
&dss_3xxx_clkdm,
&cam_clkdm,
&per_clkdm,
- &emu_clkdm,
- &dpll1_clkdm,
&dpll2_clkdm,
- &dpll3_clkdm,
- &dpll4_clkdm,
NULL
};
@@ -378,21 +487,41 @@
NULL,
};
+static struct clockdomain *clockdomains_am35x[] __initdata = {
+ &mpu_am35x_clkdm,
+ &sgx_am35x_clkdm,
+ &dss_am35x_clkdm,
+ &per_am35x_clkdm,
+ &usbhost_am35x_clkdm,
+ &dpll5_clkdm,
+ NULL
+};
+
void __init omap3xxx_clockdomains_init(void)
{
struct clockdomain **sc;
+ unsigned int rev;
if (!cpu_is_omap34xx())
return;
clkdm_register_platform_funcs(&omap3_clkdm_operations);
- clkdm_register_clkdms(clockdomains_omap3430_common);
+ clkdm_register_clkdms(clockdomains_common);
- sc = (omap_rev() == OMAP3430_REV_ES1_0) ? clockdomains_omap3430es1 :
- clockdomains_omap3430es2plus;
+ rev = omap_rev();
- clkdm_register_clkdms(sc);
+ if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) {
+ clkdm_register_clkdms(clockdomains_am35x);
+ clkdm_register_autodeps(clkdm_am35x_autodeps);
+ } else {
+ clkdm_register_clkdms(clockdomains_omap3430);
- clkdm_register_autodeps(clkdm_autodeps);
+ sc = (rev == OMAP3430_REV_ES1_0) ?
+ clockdomains_omap3430es1 : clockdomains_omap3430es2plus;
+
+ clkdm_register_clkdms(sc);
+ clkdm_register_autodeps(clkdm_autodeps);
+ }
+
clkdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index c534258..63d60a7 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -381,7 +381,7 @@
.cm_inst = OMAP4430_PRM_WKUP_CM_INST,
.clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS,
.dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT,
- .flags = CLKDM_CAN_HWSUP,
+ .flags = CLKDM_CAN_HWSUP | CLKDM_ACTIVE_WITH_MPU,
};
static struct clockdomain emu_sys_44xx_clkdm = {
@@ -430,8 +430,6 @@
&l4_wkup_44xx_clkdm,
&emu_sys_44xx_clkdm,
&l3_dma_44xx_clkdm,
- &prm_common_clkdm,
- &cm_common_clkdm,
NULL
};
diff --git a/arch/arm/mach-omap2/clockdomains_common_data.c b/arch/arm/mach-omap2/clockdomains_common_data.c
deleted file mode 100644
index 615b1f0..0000000
--- a/arch/arm/mach-omap2/clockdomains_common_data.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * OMAP2+-common clockdomain data
- *
- * Copyright (C) 2008-2012 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Paul Walmsley, Jouni Högander
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include "clockdomain.h"
-
-/* These are implicit clockdomains - they are never defined as such in TRM */
-struct clockdomain prm_common_clkdm = {
- .name = "prm_clkdm",
- .pwrdm = { .name = "wkup_pwrdm" },
-};
-
-struct clockdomain cm_common_clkdm = {
- .name = "cm_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
-};
diff --git a/arch/arm/mach-omap2/cm-regbits-33xx.h b/arch/arm/mach-omap2/cm-regbits-33xx.h
new file mode 100644
index 0000000..532027e
--- /dev/null
+++ b/arch/arm/mach-omap2/cm-regbits-33xx.h
@@ -0,0 +1,687 @@
+/*
+ * AM33XX Power Management register bits
+ *
+ * This file is automatically generated from the AM33XX hardware databases.
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H
+
+/*
+ * Used by CM_AUTOIDLE_DPLL_CORE, CM_AUTOIDLE_DPLL_DDR, CM_AUTOIDLE_DPLL_DISP,
+ * CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER
+ */
+#define AM33XX_AUTO_DPLL_MODE_SHIFT 0
+#define AM33XX_AUTO_DPLL_MODE_MASK (0x7 << 0)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_ADC_FCLK_SHIFT 14
+#define AM33XX_CLKACTIVITY_ADC_FCLK_MASK (1 << 16)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CAN_CLK_SHIFT 11
+#define AM33XX_CLKACTIVITY_CAN_CLK_MASK (1 << 11)
+
+/* Used by CM_PER_CLK_24MHZ_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_CPSW_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_L4HS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_L4HS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_SHIFT 5
+#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_MASK (1 << 5)
+
+/* Used by CM_PER_L4HS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_SHIFT 6
+#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_MASK (1 << 6)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_SHIFT 6
+#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_MASK (1 << 6)
+
+/* Used by CM_CEFUSE_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT 9
+#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK (1 << 9)
+
+/* Used by CM_L3_AON_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_DBGSYSCLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_DBGSYSCLK_MASK (1 << 2)
+
+/* Used by CM_L3_AON_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_DEBUG_CLKA_SHIFT 4
+#define AM33XX_CLKACTIVITY_DEBUG_CLKA_MASK (1 << 4)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_EMIF_GCLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_EMIF_GCLK_MASK (1 << 2)
+
+/* Used by CM_GFX_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GFX_FCLK_SHIFT 9
+#define AM33XX_CLKACTIVITY_GFX_FCLK_MASK (1 << 9)
+
+/* Used by CM_GFX_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_MASK (1 << 8)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_MASK (1 << 8)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_SHIFT 19
+#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_MASK (1 << 19)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_SHIFT 20
+#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_MASK (1 << 20)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_SHIFT 21
+#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_MASK (1 << 21)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_SHIFT 22
+#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_MASK (1 << 22)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_SHIFT 26
+#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_MASK (1 << 26)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_SHIFT 18
+#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_I2C0_GFCLK_SHIFT 11
+#define AM33XX_CLKACTIVITY_I2C0_GFCLK_MASK (1 << 11)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_I2C_FCLK_SHIFT 24
+#define AM33XX_CLKACTIVITY_I2C_FCLK_MASK (1 << 24)
+
+/* Used by CM_PER_PRUSS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_SHIFT 5
+#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_MASK (1 << 5)
+
+/* Used by CM_PER_PRUSS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_PRUSS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_SHIFT 6
+#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_MASK (1 << 6)
+
+/* Used by CM_PER_L3S_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L3S_GCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_L3S_GCLK_MASK (1 << 3)
+
+/* Used by CM_L3_AON_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L3_AON_GCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_L3_AON_GCLK_MASK (1 << 3)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L3_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_L3_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_L4FW_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4FW_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4FW_GCLK_MASK (1 << 8)
+
+/* Used by CM_PER_L4HS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4HS_GCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_L4HS_GCLK_MASK (1 << 3)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4LS_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4LS_GCLK_MASK (1 << 8)
+
+/* Used by CM_GFX_L4LS_GFX_CLKSTCTRL__1 */
+#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_MASK (1 << 8)
+
+/* Used by CM_CEFUSE_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_MASK (1 << 8)
+
+/* Used by CM_RTC_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_MASK (1 << 8)
+
+/* Used by CM_L4_WKUP_AON_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_MASK (1 << 2)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_MASK (1 << 2)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_LCDC_GCLK_SHIFT 17
+#define AM33XX_CLKACTIVITY_LCDC_GCLK_MASK (1 << 17)
+
+/* Used by CM_PER_LCDC_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_LCDC_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_SHIFT 5
+#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_MASK (1 << 5)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_MCASP_GCLK_SHIFT 7
+#define AM33XX_CLKACTIVITY_MCASP_GCLK_MASK (1 << 7)
+
+/* Used by CM_PER_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_MMC_FCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_MMC_FCLK_MASK (1 << 3)
+
+/* Used by CM_MPU_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_MPU_CLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_MPU_CLK_MASK (1 << 2)
+
+/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_MASK (1 << 4)
+
+/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_SHIFT 5
+#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_MASK (1 << 5)
+
+/* Used by CM_RTC_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_RTC_32KCLK_SHIFT 9
+#define AM33XX_CLKACTIVITY_RTC_32KCLK_MASK (1 << 9)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_SPI_GCLK_SHIFT 25
+#define AM33XX_CLKACTIVITY_SPI_GCLK_MASK (1 << 25)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_SR_SYSCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_SR_SYSCLK_MASK (1 << 3)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER0_GCLK_SHIFT 10
+#define AM33XX_CLKACTIVITY_TIMER0_GCLK_MASK (1 << 10)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER1_GCLK_SHIFT 13
+#define AM33XX_CLKACTIVITY_TIMER1_GCLK_MASK (1 << 13)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER2_GCLK_SHIFT 14
+#define AM33XX_CLKACTIVITY_TIMER2_GCLK_MASK (1 << 14)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER3_GCLK_SHIFT 15
+#define AM33XX_CLKACTIVITY_TIMER3_GCLK_MASK (1 << 15)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER4_GCLK_SHIFT 16
+#define AM33XX_CLKACTIVITY_TIMER4_GCLK_MASK (1 << 16)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER5_GCLK_SHIFT 27
+#define AM33XX_CLKACTIVITY_TIMER5_GCLK_MASK (1 << 27)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER6_GCLK_SHIFT 28
+#define AM33XX_CLKACTIVITY_TIMER6_GCLK_MASK (1 << 28)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_TIMER7_GCLK_SHIFT 13
+#define AM33XX_CLKACTIVITY_TIMER7_GCLK_MASK (1 << 13)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_UART0_GFCLK_SHIFT 12
+#define AM33XX_CLKACTIVITY_UART0_GFCLK_MASK (1 << 12)
+
+/* Used by CM_PER_L4LS_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_UART_GFCLK_SHIFT 10
+#define AM33XX_CLKACTIVITY_UART_GFCLK_MASK (1 << 10)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_WDT0_GCLK_SHIFT 9
+#define AM33XX_CLKACTIVITY_WDT0_GCLK_MASK (1 << 9)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define AM33XX_CLKACTIVITY_WDT1_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_WDT1_GCLK_MASK (1 << 4)
+
+/* Used by CLKSEL_GFX_FCLK */
+#define AM33XX_CLKDIV_SEL_GFX_FCLK_SHIFT 0
+#define AM33XX_CLKDIV_SEL_GFX_FCLK_MASK (1 << 0)
+
+/* Used by CM_CLKOUT_CTRL */
+#define AM33XX_CLKOUT2DIV_SHIFT 3
+#define AM33XX_CLKOUT2DIV_MASK (0x05 << 3)
+
+/* Used by CM_CLKOUT_CTRL */
+#define AM33XX_CLKOUT2EN_SHIFT 7
+#define AM33XX_CLKOUT2EN_MASK (1 << 7)
+
+/* Used by CM_CLKOUT_CTRL */
+#define AM33XX_CLKOUT2SOURCE_SHIFT 0
+#define AM33XX_CLKOUT2SOURCE_MASK (0x02 << 0)
+
+/*
+ * Used by CLKSEL_GPIO0_DBCLK, CLKSEL_LCDC_PIXEL_CLK, CLKSEL_TIMER2_CLK,
+ * CLKSEL_TIMER3_CLK, CLKSEL_TIMER4_CLK, CLKSEL_TIMER5_CLK, CLKSEL_TIMER6_CLK,
+ * CLKSEL_TIMER7_CLK
+ */
+#define AM33XX_CLKSEL_SHIFT 0
+#define AM33XX_CLKSEL_MASK (0x01 << 0)
+
+/*
+ * Renamed from CLKSEL Used by CLKSEL_PRUSS_OCP_CLK, CLKSEL_WDT1_CLK,
+ * CM_CPTS_RFT_CLKSEL
+ */
+#define AM33XX_CLKSEL_0_0_SHIFT 0
+#define AM33XX_CLKSEL_0_0_MASK (1 << 0)
+
+#define AM33XX_CLKSEL_0_1_SHIFT 0
+#define AM33XX_CLKSEL_0_1_MASK (3 << 0)
+
+/* Renamed from CLKSEL Used by CLKSEL_TIMER1MS_CLK */
+#define AM33XX_CLKSEL_0_2_SHIFT 0
+#define AM33XX_CLKSEL_0_2_MASK (7 << 0)
+
+/* Used by CLKSEL_GFX_FCLK */
+#define AM33XX_CLKSEL_GFX_FCLK_SHIFT 1
+#define AM33XX_CLKSEL_GFX_FCLK_MASK (1 << 1)
+
+/*
+ * Used by CM_MPU_CLKSTCTRL, CM_RTC_CLKSTCTRL, CM_PER_CLK_24MHZ_CLKSTCTRL,
+ * CM_PER_CPSW_CLKSTCTRL, CM_PER_PRUSS_CLKSTCTRL, CM_PER_L3S_CLKSTCTRL,
+ * CM_PER_L3_CLKSTCTRL, CM_PER_L4FW_CLKSTCTRL, CM_PER_L4HS_CLKSTCTRL,
+ * CM_PER_L4LS_CLKSTCTRL, CM_PER_LCDC_CLKSTCTRL, CM_PER_OCPWP_L3_CLKSTCTRL,
+ * CM_L3_AON_CLKSTCTRL, CM_L4_WKUP_AON_CLKSTCTRL, CM_WKUP_CLKSTCTRL,
+ * CM_GFX_L3_CLKSTCTRL, CM_GFX_L4LS_GFX_CLKSTCTRL__1, CM_CEFUSE_CLKSTCTRL
+ */
+#define AM33XX_CLKTRCTRL_SHIFT 0
+#define AM33XX_CLKTRCTRL_MASK (0x3 << 0)
+
+/*
+ * Used by CM_SSC_DELTAMSTEP_DPLL_CORE, CM_SSC_DELTAMSTEP_DPLL_DDR,
+ * CM_SSC_DELTAMSTEP_DPLL_DISP, CM_SSC_DELTAMSTEP_DPLL_MPU,
+ * CM_SSC_DELTAMSTEP_DPLL_PER
+ */
+#define AM33XX_DELTAMSTEP_SHIFT 0
+#define AM33XX_DELTAMSTEP_MASK (0x19 << 0)
+
+/* Used by CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, CM_CLKSEL_DPLL_MPU */
+#define AM33XX_DPLL_BYP_CLKSEL_SHIFT 23
+#define AM33XX_DPLL_BYP_CLKSEL_MASK (1 << 23)
+
+/* Used by CM_CLKDCOLDO_DPLL_PER */
+#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT 8
+#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_MASK (1 << 8)
+
+/* Used by CM_CLKDCOLDO_DPLL_PER */
+#define AM33XX_DPLL_CLKDCOLDO_PWDN_SHIFT 12
+#define AM33XX_DPLL_CLKDCOLDO_PWDN_MASK (1 << 12)
+
+/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
+#define AM33XX_DPLL_CLKOUT_DIV_SHIFT 0
+#define AM33XX_DPLL_CLKOUT_DIV_MASK (0x1f << 0)
+
+/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_PER */
+#define AM33XX_DPLL_CLKOUT_DIV_0_6_SHIFT 0
+#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK (0x06 << 0)
+
+/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_SHIFT 5
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_MASK (1 << 5)
+
+/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_PER */
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_SHIFT 7
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_MASK (1 << 7)
+
+/*
+ * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU,
+ * CM_DIV_M2_DPLL_PER
+ */
+#define AM33XX_DPLL_CLKOUT_GATE_CTRL_SHIFT 8
+#define AM33XX_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8)
+
+/*
+ * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP,
+ * CM_CLKSEL_DPLL_MPU
+ */
+#define AM33XX_DPLL_DIV_SHIFT 0
+#define AM33XX_DPLL_DIV_MASK (0x7f << 0)
+
+#define AM33XX_DPLL_PER_DIV_MASK (0xff << 0)
+
+/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_PERIPH */
+#define AM33XX_DPLL_DIV_0_7_SHIFT 0
+#define AM33XX_DPLL_DIV_0_7_MASK (0x07 << 0)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU
+ */
+#define AM33XX_DPLL_DRIFTGUARD_EN_SHIFT 8
+#define AM33XX_DPLL_DRIFTGUARD_EN_MASK (1 << 8)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
+ */
+#define AM33XX_DPLL_EN_SHIFT 0
+#define AM33XX_DPLL_EN_MASK (0x7 << 0)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU
+ */
+#define AM33XX_DPLL_LPMODE_EN_SHIFT 10
+#define AM33XX_DPLL_LPMODE_EN_MASK (1 << 10)
+
+/*
+ * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP,
+ * CM_CLKSEL_DPLL_MPU
+ */
+#define AM33XX_DPLL_MULT_SHIFT 8
+#define AM33XX_DPLL_MULT_MASK (0x7ff << 8)
+
+/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_PERIPH */
+#define AM33XX_DPLL_MULT_PERIPH_SHIFT 8
+#define AM33XX_DPLL_MULT_PERIPH_MASK (0xfff << 8)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU
+ */
+#define AM33XX_DPLL_REGM4XEN_SHIFT 11
+#define AM33XX_DPLL_REGM4XEN_MASK (1 << 11)
+
+/* Used by CM_CLKSEL_DPLL_PERIPH */
+#define AM33XX_DPLL_SD_DIV_SHIFT 24
+#define AM33XX_DPLL_SD_DIV_MASK (24, 31)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
+ */
+#define AM33XX_DPLL_SSC_ACK_SHIFT 13
+#define AM33XX_DPLL_SSC_ACK_MASK (1 << 13)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
+ */
+#define AM33XX_DPLL_SSC_DOWNSPREAD_SHIFT 14
+#define AM33XX_DPLL_SSC_DOWNSPREAD_MASK (1 << 14)
+
+/*
+ * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
+ */
+#define AM33XX_DPLL_SSC_EN_SHIFT 12
+#define AM33XX_DPLL_SSC_EN_MASK (1 << 12)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT 0
+#define AM33XX_HSDIVIDER_CLKOUT1_DIV_MASK (0x1f << 0)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT 5
+#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_MASK (1 << 5)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT 8
+#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK (1 << 8)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_SHIFT 12
+#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_MASK (1 << 12)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT 0
+#define AM33XX_HSDIVIDER_CLKOUT2_DIV_MASK (0x1f << 0)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT 5
+#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_MASK (1 << 5)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT 8
+#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK (1 << 8)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_SHIFT 12
+#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_MASK (1 << 12)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT 0
+#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK (0x04 << 0)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT 5
+#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_MASK (1 << 5)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT 8
+#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK (1 << 8)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_SHIFT 12
+#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_MASK (1 << 12)
+
+/*
+ * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL,
+ * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL,
+ * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL,
+ * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL,
+ * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL,
+ * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL,
+ * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL,
+ * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL,
+ * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL,
+ * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL,
+ * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL,
+ * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL,
+ * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL,
+ * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL,
+ * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
+ * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL,
+ * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL,
+ * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL,
+ * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL,
+ * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL,
+ * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL,
+ * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
+ * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL,
+ * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL,
+ * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL,
+ * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL,
+ * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL,
+ * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL,
+ * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL,
+ * CM_WKUP_WDT1_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL,
+ * CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL
+ */
+#define AM33XX_IDLEST_SHIFT 16
+#define AM33XX_IDLEST_MASK (0x3 << 16)
+#define AM33XX_IDLEST_VAL 0x3
+
+/* Used by CM_MAC_CLKSEL */
+#define AM33XX_MII_CLK_SEL_SHIFT 2
+#define AM33XX_MII_CLK_SEL_MASK (1 << 2)
+
+/*
+ * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR,
+ * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU,
+ * CM_SSC_MODFREQDIV_DPLL_PER
+ */
+#define AM33XX_MODFREQDIV_EXPONENT_SHIFT 8
+#define AM33XX_MODFREQDIV_EXPONENT_MASK (0x10 << 8)
+
+/*
+ * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR,
+ * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU,
+ * CM_SSC_MODFREQDIV_DPLL_PER
+ */
+#define AM33XX_MODFREQDIV_MANTISSA_SHIFT 0
+#define AM33XX_MODFREQDIV_MANTISSA_MASK (0x06 << 0)
+
+/*
+ * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL,
+ * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL,
+ * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL,
+ * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL,
+ * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL,
+ * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL,
+ * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL,
+ * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL,
+ * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL,
+ * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL,
+ * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL,
+ * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL,
+ * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL,
+ * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL,
+ * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
+ * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL,
+ * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL,
+ * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL,
+ * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL,
+ * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL,
+ * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL,
+ * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
+ * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL,
+ * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL,
+ * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL,
+ * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL,
+ * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL,
+ * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL,
+ * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL,
+ * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL,
+ * CM_GFX_GFX_CLKCTRL, CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL,
+ * CM_CEFUSE_CEFUSE_CLKCTRL
+ */
+#define AM33XX_MODULEMODE_SHIFT 0
+#define AM33XX_MODULEMODE_MASK (0x3 << 0)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_OPTCLK_DEBUG_CLKA_SHIFT 30
+#define AM33XX_OPTCLK_DEBUG_CLKA_MASK (1 << 30)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT 19
+#define AM33XX_OPTFCLKEN_DBGSYSCLK_MASK (1 << 19)
+
+/* Used by CM_WKUP_GPIO0_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO1_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO2_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO3_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO4_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO5_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_MASK (1 << 18)
+
+/* Used by CM_PER_GPIO6_CLKCTRL */
+#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_MASK (1 << 18)
+
+/*
+ * Used by CM_MPU_MPU_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL, CM_PER_PRUSS_CLKCTRL,
+ * CM_PER_IEEE5000_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MLB_CLKCTRL,
+ * CM_PER_MSTR_EXPS_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
+ * CM_PER_SPARE_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
+ * CM_PER_TPTC2_CLKCTRL, CM_PER_USB0_CLKCTRL, CM_WKUP_DEBUGSS_CLKCTRL,
+ * CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL
+ */
+#define AM33XX_STBYST_SHIFT 18
+#define AM33XX_STBYST_MASK (1 << 18)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_STM_PMD_CLKDIVSEL_SHIFT 27
+#define AM33XX_STM_PMD_CLKDIVSEL_MASK (0x29 << 27)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_STM_PMD_CLKSEL_SHIFT 22
+#define AM33XX_STM_PMD_CLKSEL_MASK (0x23 << 22)
+
+/*
+ * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP,
+ * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
+ */
+#define AM33XX_ST_DPLL_CLK_SHIFT 0
+#define AM33XX_ST_DPLL_CLK_MASK (1 << 0)
+
+/* Used by CM_CLKDCOLDO_DPLL_PER */
+#define AM33XX_ST_DPLL_CLKDCOLDO_SHIFT 8
+#define AM33XX_ST_DPLL_CLKDCOLDO_MASK (1 << 8)
+
+/*
+ * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU,
+ * CM_DIV_M2_DPLL_PER
+ */
+#define AM33XX_ST_DPLL_CLKOUT_SHIFT 9
+#define AM33XX_ST_DPLL_CLKOUT_MASK (1 << 9)
+
+/* Used by CM_DIV_M4_DPLL_CORE */
+#define AM33XX_ST_HSDIVIDER_CLKOUT1_SHIFT 9
+#define AM33XX_ST_HSDIVIDER_CLKOUT1_MASK (1 << 9)
+
+/* Used by CM_DIV_M5_DPLL_CORE */
+#define AM33XX_ST_HSDIVIDER_CLKOUT2_SHIFT 9
+#define AM33XX_ST_HSDIVIDER_CLKOUT2_MASK (1 << 9)
+
+/* Used by CM_DIV_M6_DPLL_CORE */
+#define AM33XX_ST_HSDIVIDER_CLKOUT3_SHIFT 9
+#define AM33XX_ST_HSDIVIDER_CLKOUT3_MASK (1 << 9)
+
+/*
+ * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP,
+ * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
+ */
+#define AM33XX_ST_MN_BYPASS_SHIFT 8
+#define AM33XX_ST_MN_BYPASS_MASK (1 << 8)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_TRC_PMD_CLKDIVSEL_SHIFT 24
+#define AM33XX_TRC_PMD_CLKDIVSEL_MASK (0x26 << 24)
+
+/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
+#define AM33XX_TRC_PMD_CLKSEL_SHIFT 20
+#define AM33XX_TRC_PMD_CLKSEL_MASK (0x21 << 20)
+
+/* Used by CONTROL_SEC_CLK_CTRL */
+#define AM33XX_TIMER0_CLKSEL_MASK (0x3 << 4)
+#endif
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 8083a8c..766338f 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -169,8 +169,6 @@
/* AM35XX specific CM_ICLKEN1_CORE bits */
#define AM35XX_EN_IPSS_MASK (1 << 4)
#define AM35XX_EN_IPSS_SHIFT 4
-#define AM35XX_EN_UART4_MASK (1 << 23)
-#define AM35XX_EN_UART4_SHIFT 23
/* CM_ICLKEN2_CORE */
#define OMAP3430_EN_PKA_MASK (1 << 4)
@@ -207,6 +205,8 @@
#define OMAP3430_ST_DES2_MASK (1 << 26)
#define OMAP3430_ST_MSPRO_SHIFT 23
#define OMAP3430_ST_MSPRO_MASK (1 << 23)
+#define AM35XX_ST_UART4_SHIFT 23
+#define AM35XX_ST_UART4_MASK (1 << 23)
#define OMAP3430_ST_HDQ_SHIFT 22
#define OMAP3430_ST_HDQ_MASK (1 << 22)
#define OMAP3430ES1_ST_FAC_SHIFT 8
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index a7bc096..f24e3f7 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -22,4 +22,15 @@
*/
#define MAX_MODULE_READY_TIME 2000
+/*
+ * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for
+ * the PRCM to request that a module enter the inactive state in the
+ * case of OMAP2 & 3. In the case of OMAP4 this is the max duration
+ * in microseconds for the module to reach the inactive state from
+ * a functional state.
+ * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during
+ * kernel init.
+ */
+#define MAX_MODULE_DISABLE_TIME 5000
+
#endif
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
new file mode 100644
index 0000000..13f56ea
--- /dev/null
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -0,0 +1,313 @@
+/*
+ * AM33XX CM functions
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Reference taken from from OMAP4 cminst44xx.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+
+#include "cm.h"
+#include "cm33xx.h"
+#include "cm-regbits-34xx.h"
+#include "cm-regbits-33xx.h"
+#include "prm33xx.h"
+
+/*
+ * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield:
+ *
+ * 0x0 func: Module is fully functional, including OCP
+ * 0x1 trans: Module is performing transition: wakeup, or sleep, or sleep
+ * abortion
+ * 0x2 idle: Module is in Idle mode (only OCP part). It is functional if
+ * using separate functional clock
+ * 0x3 disabled: Module is disabled and cannot be accessed
+ *
+ */
+#define CLKCTRL_IDLEST_FUNCTIONAL 0x0
+#define CLKCTRL_IDLEST_INTRANSITION 0x1
+#define CLKCTRL_IDLEST_INTERFACE_IDLE 0x2
+#define CLKCTRL_IDLEST_DISABLED 0x3
+
+/* Private functions */
+
+/* Read a register in a CM instance */
+static inline u32 am33xx_cm_read_reg(s16 inst, u16 idx)
+{
+ return __raw_readl(cm_base + inst + idx);
+}
+
+/* Write into a register in a CM */
+static inline void am33xx_cm_write_reg(u32 val, s16 inst, u16 idx)
+{
+ __raw_writel(val, cm_base + inst + idx);
+}
+
+/* Read-modify-write a register in CM */
+static inline u32 am33xx_cm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, idx);
+ v &= ~mask;
+ v |= bits;
+ am33xx_cm_write_reg(v, inst, idx);
+
+ return v;
+}
+
+static inline u32 am33xx_cm_set_reg_bits(u32 bits, s16 inst, s16 idx)
+{
+ return am33xx_cm_rmw_reg_bits(bits, bits, inst, idx);
+}
+
+static inline u32 am33xx_cm_clear_reg_bits(u32 bits, s16 inst, s16 idx)
+{
+ return am33xx_cm_rmw_reg_bits(bits, 0x0, inst, idx);
+}
+
+static inline u32 am33xx_cm_read_reg_bits(u16 inst, s16 idx, u32 mask)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, idx);
+ v &= mask;
+ v >>= __ffs(mask);
+
+ return v;
+}
+
+/**
+ * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to
+ * bit 0.
+ */
+static u32 _clkctrl_idlest(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ u32 v = am33xx_cm_read_reg(inst, clkctrl_offs);
+ v &= AM33XX_IDLEST_MASK;
+ v >>= AM33XX_IDLEST_SHIFT;
+ return v;
+}
+
+/**
+ * _is_module_ready - can module registers be accessed without causing an abort?
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either
+ * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise.
+ */
+static bool _is_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ u32 v;
+
+ v = _clkctrl_idlest(inst, cdoffs, clkctrl_offs);
+
+ return (v == CLKCTRL_IDLEST_FUNCTIONAL ||
+ v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false;
+}
+
+/**
+ * _clktrctrl_write - write @c to a CM_CLKSTCTRL.CLKTRCTRL register bitfield
+ * @c: CLKTRCTRL register bitfield (LSB = bit 0, i.e., unshifted)
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * @c must be the unshifted value for CLKTRCTRL - i.e., this function
+ * will handle the shift itself.
+ */
+static void _clktrctrl_write(u8 c, s16 inst, u16 cdoffs)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, cdoffs);
+ v &= ~AM33XX_CLKTRCTRL_MASK;
+ v |= c << AM33XX_CLKTRCTRL_SHIFT;
+ am33xx_cm_write_reg(v, inst, cdoffs);
+}
+
+/* Public functions */
+
+/**
+ * am33xx_cm_is_clkdm_in_hwsup - is a clockdomain in hwsup idle mode?
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Returns true if the clockdomain referred to by (@inst, @cdoffs)
+ * is in hardware-supervised idle mode, or 0 otherwise.
+ */
+bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, cdoffs);
+ v &= AM33XX_CLKTRCTRL_MASK;
+ v >>= AM33XX_CLKTRCTRL_SHIFT;
+
+ return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? true : false;
+}
+
+/**
+ * am33xx_cm_clkdm_enable_hwsup - put a clockdomain in hwsup-idle mode
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Put a clockdomain referred to by (@inst, @cdoffs) into
+ * hardware-supervised idle mode. No return value.
+ */
+void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs)
+{
+ _clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, inst, cdoffs);
+}
+
+/**
+ * am33xx_cm_clkdm_disable_hwsup - put a clockdomain in swsup-idle mode
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Put a clockdomain referred to by (@inst, @cdoffs) into
+ * software-supervised idle mode, i.e., controlled manually by the
+ * Linux OMAP clockdomain code. No return value.
+ */
+void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs)
+{
+ _clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, inst, cdoffs);
+}
+
+/**
+ * am33xx_cm_clkdm_force_sleep - try to put a clockdomain into idle
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Put a clockdomain referred to by (@inst, @cdoffs) into idle
+ * No return value.
+ */
+void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs)
+{
+ _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, inst, cdoffs);
+}
+
+/**
+ * am33xx_cm_clkdm_force_wakeup - try to take a clockdomain out of idle
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Take a clockdomain referred to by (@inst, @cdoffs) out of idle,
+ * waking it up. No return value.
+ */
+void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs)
+{
+ _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, inst, cdoffs);
+}
+
+/*
+ *
+ */
+
+/**
+ * am33xx_cm_wait_module_ready - wait for a module to be in 'func' state
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Wait for the module IDLEST to be functional. If the idle state is in any
+ * the non functional state (trans, idle or disabled), module and thus the
+ * sysconfig cannot be accessed and will probably lead to an "imprecise
+ * external abort"
+ */
+int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ int i = 0;
+
+ if (!clkctrl_offs)
+ return 0;
+
+ omap_test_timeout(_is_module_ready(inst, cdoffs, clkctrl_offs),
+ MAX_MODULE_READY_TIME, i);
+
+ return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
+/**
+ * am33xx_cm_wait_module_idle - wait for a module to be in 'disabled'
+ * state
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Wait for the module IDLEST to be disabled. Some PRCM transition,
+ * like reset assertion or parent clock de-activation must wait the
+ * module to be fully disabled.
+ */
+int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ int i = 0;
+
+ if (!clkctrl_offs)
+ return 0;
+
+ omap_test_timeout((_clkctrl_idlest(inst, cdoffs, clkctrl_offs) ==
+ CLKCTRL_IDLEST_DISABLED),
+ MAX_MODULE_READY_TIME, i);
+
+ return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
+/**
+ * am33xx_cm_module_enable - Enable the modulemode inside CLKCTRL
+ * @mode: Module mode (SW or HW)
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * No return value.
+ */
+void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, clkctrl_offs);
+ v &= ~AM33XX_MODULEMODE_MASK;
+ v |= mode << AM33XX_MODULEMODE_SHIFT;
+ am33xx_cm_write_reg(v, inst, clkctrl_offs);
+}
+
+/**
+ * am33xx_cm_module_disable - Disable the module inside CLKCTRL
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * No return value.
+ */
+void am33xx_cm_module_disable(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ u32 v;
+
+ v = am33xx_cm_read_reg(inst, clkctrl_offs);
+ v &= ~AM33XX_MODULEMODE_MASK;
+ am33xx_cm_write_reg(v, inst, clkctrl_offs);
+}
diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h
new file mode 100644
index 0000000..5fa0b62
--- /dev/null
+++ b/arch/arm/mach-omap2/cm33xx.h
@@ -0,0 +1,420 @@
+/*
+ * AM33XX CM offset macros
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_33XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_33XX_H
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include "common.h"
+
+#include "cm.h"
+#include "cm-regbits-33xx.h"
+#include "cm33xx.h"
+
+/* CM base address */
+#define AM33XX_CM_BASE 0x44e00000
+
+#define AM33XX_CM_REGADDR(inst, reg) \
+ AM33XX_L4_WK_IO_ADDRESS(AM33XX_CM_BASE + (inst) + (reg))
+
+/* CM instances */
+#define AM33XX_CM_PER_MOD 0x0000
+#define AM33XX_CM_WKUP_MOD 0x0400
+#define AM33XX_CM_DPLL_MOD 0x0500
+#define AM33XX_CM_MPU_MOD 0x0600
+#define AM33XX_CM_DEVICE_MOD 0x0700
+#define AM33XX_CM_RTC_MOD 0x0800
+#define AM33XX_CM_GFX_MOD 0x0900
+#define AM33XX_CM_CEFUSE_MOD 0x0A00
+
+/* CM */
+
+/* CM.PER_CM register offsets */
+#define AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET 0x0000
+#define AM33XX_CM_PER_L4LS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0000)
+#define AM33XX_CM_PER_L3S_CLKSTCTRL_OFFSET 0x0004
+#define AM33XX_CM_PER_L3S_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0004)
+#define AM33XX_CM_PER_L4FW_CLKSTCTRL_OFFSET 0x0008
+#define AM33XX_CM_PER_L4FW_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0008)
+#define AM33XX_CM_PER_L3_CLKSTCTRL_OFFSET 0x000c
+#define AM33XX_CM_PER_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x000c)
+#define AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET 0x0014
+#define AM33XX_CM_PER_CPGMAC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0014)
+#define AM33XX_CM_PER_LCDC_CLKCTRL_OFFSET 0x0018
+#define AM33XX_CM_PER_LCDC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0018)
+#define AM33XX_CM_PER_USB0_CLKCTRL_OFFSET 0x001c
+#define AM33XX_CM_PER_USB0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x001c)
+#define AM33XX_CM_PER_MLB_CLKCTRL_OFFSET 0x0020
+#define AM33XX_CM_PER_MLB_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0020)
+#define AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET 0x0024
+#define AM33XX_CM_PER_TPTC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0024)
+#define AM33XX_CM_PER_EMIF_CLKCTRL_OFFSET 0x0028
+#define AM33XX_CM_PER_EMIF_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0028)
+#define AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET 0x002c
+#define AM33XX_CM_PER_OCMCRAM_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x002c)
+#define AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET 0x0030
+#define AM33XX_CM_PER_GPMC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0030)
+#define AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET 0x0034
+#define AM33XX_CM_PER_MCASP0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0034)
+#define AM33XX_CM_PER_UART5_CLKCTRL_OFFSET 0x0038
+#define AM33XX_CM_PER_UART5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0038)
+#define AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET 0x003c
+#define AM33XX_CM_PER_MMC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x003c)
+#define AM33XX_CM_PER_ELM_CLKCTRL_OFFSET 0x0040
+#define AM33XX_CM_PER_ELM_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0040)
+#define AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET 0x0044
+#define AM33XX_CM_PER_I2C2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0044)
+#define AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET 0x0048
+#define AM33XX_CM_PER_I2C1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0048)
+#define AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET 0x004c
+#define AM33XX_CM_PER_SPI0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x004c)
+#define AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET 0x0050
+#define AM33XX_CM_PER_SPI1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0050)
+#define AM33XX_CM_PER_SPI2_CLKCTRL_OFFSET 0x0054
+#define AM33XX_CM_PER_SPI2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0054)
+#define AM33XX_CM_PER_SPI3_CLKCTRL_OFFSET 0x0058
+#define AM33XX_CM_PER_SPI3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0058)
+#define AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET 0x0060
+#define AM33XX_CM_PER_L4LS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0060)
+#define AM33XX_CM_PER_L4FW_CLKCTRL_OFFSET 0x0064
+#define AM33XX_CM_PER_L4FW_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0064)
+#define AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET 0x0068
+#define AM33XX_CM_PER_MCASP1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0068)
+#define AM33XX_CM_PER_UART1_CLKCTRL_OFFSET 0x006c
+#define AM33XX_CM_PER_UART1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x006c)
+#define AM33XX_CM_PER_UART2_CLKCTRL_OFFSET 0x0070
+#define AM33XX_CM_PER_UART2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0070)
+#define AM33XX_CM_PER_UART3_CLKCTRL_OFFSET 0x0074
+#define AM33XX_CM_PER_UART3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0074)
+#define AM33XX_CM_PER_UART4_CLKCTRL_OFFSET 0x0078
+#define AM33XX_CM_PER_UART4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0078)
+#define AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET 0x007c
+#define AM33XX_CM_PER_TIMER7_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x007c)
+#define AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET 0x0080
+#define AM33XX_CM_PER_TIMER2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0080)
+#define AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET 0x0084
+#define AM33XX_CM_PER_TIMER3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0084)
+#define AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET 0x0088
+#define AM33XX_CM_PER_TIMER4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0088)
+#define AM33XX_CM_PER_MCASP2_CLKCTRL_OFFSET 0x008c
+#define AM33XX_CM_PER_MCASP2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x008c)
+#define AM33XX_CM_PER_RNG_CLKCTRL_OFFSET 0x0090
+#define AM33XX_CM_PER_RNG_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0090)
+#define AM33XX_CM_PER_AES0_CLKCTRL_OFFSET 0x0094
+#define AM33XX_CM_PER_AES0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0094)
+#define AM33XX_CM_PER_AES1_CLKCTRL_OFFSET 0x0098
+#define AM33XX_CM_PER_AES1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0098)
+#define AM33XX_CM_PER_DES_CLKCTRL_OFFSET 0x009c
+#define AM33XX_CM_PER_DES_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x009c)
+#define AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET 0x00a0
+#define AM33XX_CM_PER_SHA0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a0)
+#define AM33XX_CM_PER_PKA_CLKCTRL_OFFSET 0x00a4
+#define AM33XX_CM_PER_PKA_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a4)
+#define AM33XX_CM_PER_GPIO6_CLKCTRL_OFFSET 0x00a8
+#define AM33XX_CM_PER_GPIO6_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a8)
+#define AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET 0x00ac
+#define AM33XX_CM_PER_GPIO1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00ac)
+#define AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET 0x00b0
+#define AM33XX_CM_PER_GPIO2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b0)
+#define AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET 0x00b4
+#define AM33XX_CM_PER_GPIO3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b4)
+#define AM33XX_CM_PER_GPIO4_CLKCTRL_OFFSET 0x00b8
+#define AM33XX_CM_PER_GPIO4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b8)
+#define AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET 0x00bc
+#define AM33XX_CM_PER_TPCC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00bc)
+#define AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET 0x00c0
+#define AM33XX_CM_PER_DCAN0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00c0)
+#define AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET 0x00c4
+#define AM33XX_CM_PER_DCAN1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00c4)
+#define AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET 0x00cc
+#define AM33XX_CM_PER_EPWMSS1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00cc)
+#define AM33XX_CM_PER_EMIF_FW_CLKCTRL_OFFSET 0x00d0
+#define AM33XX_CM_PER_EMIF_FW_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d0)
+#define AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET 0x00d4
+#define AM33XX_CM_PER_EPWMSS0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d4)
+#define AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET 0x00d8
+#define AM33XX_CM_PER_EPWMSS2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d8)
+#define AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET 0x00dc
+#define AM33XX_CM_PER_L3_INSTR_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00dc)
+#define AM33XX_CM_PER_L3_CLKCTRL_OFFSET 0x00e0
+#define AM33XX_CM_PER_L3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e0)
+#define AM33XX_CM_PER_IEEE5000_CLKCTRL_OFFSET 0x00e4
+#define AM33XX_CM_PER_IEEE5000_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e4)
+#define AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET 0x00e8
+#define AM33XX_CM_PER_PRUSS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e8)
+#define AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET 0x00ec
+#define AM33XX_CM_PER_TIMER5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00ec)
+#define AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET 0x00f0
+#define AM33XX_CM_PER_TIMER6_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f0)
+#define AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET 0x00f4
+#define AM33XX_CM_PER_MMC1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f4)
+#define AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET 0x00f8
+#define AM33XX_CM_PER_MMC2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f8)
+#define AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET 0x00fc
+#define AM33XX_CM_PER_TPTC1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00fc)
+#define AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET 0x0100
+#define AM33XX_CM_PER_TPTC2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0100)
+#define AM33XX_CM_PER_GPIO5_CLKCTRL_OFFSET 0x0104
+#define AM33XX_CM_PER_GPIO5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0104)
+#define AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET 0x010c
+#define AM33XX_CM_PER_SPINLOCK_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x010c)
+#define AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET 0x0110
+#define AM33XX_CM_PER_MAILBOX0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0110)
+#define AM33XX_CM_PER_L4HS_CLKSTCTRL_OFFSET 0x011c
+#define AM33XX_CM_PER_L4HS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x011c)
+#define AM33XX_CM_PER_L4HS_CLKCTRL_OFFSET 0x0120
+#define AM33XX_CM_PER_L4HS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0120)
+#define AM33XX_CM_PER_MSTR_EXPS_CLKCTRL_OFFSET 0x0124
+#define AM33XX_CM_PER_MSTR_EXPS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0124)
+#define AM33XX_CM_PER_SLV_EXPS_CLKCTRL_OFFSET 0x0128
+#define AM33XX_CM_PER_SLV_EXPS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0128)
+#define AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL_OFFSET 0x012c
+#define AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x012c)
+#define AM33XX_CM_PER_OCPWP_CLKCTRL_OFFSET 0x0130
+#define AM33XX_CM_PER_OCPWP_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0130)
+#define AM33XX_CM_PER_MAILBOX1_CLKCTRL_OFFSET 0x0134
+#define AM33XX_CM_PER_MAILBOX1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0134)
+#define AM33XX_CM_PER_PRUSS_CLKSTCTRL_OFFSET 0x0140
+#define AM33XX_CM_PER_PRUSS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0140)
+#define AM33XX_CM_PER_CPSW_CLKSTCTRL_OFFSET 0x0144
+#define AM33XX_CM_PER_CPSW_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0144)
+#define AM33XX_CM_PER_LCDC_CLKSTCTRL_OFFSET 0x0148
+#define AM33XX_CM_PER_LCDC_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0148)
+#define AM33XX_CM_PER_CLKDIV32K_CLKCTRL_OFFSET 0x014c
+#define AM33XX_CM_PER_CLKDIV32K_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x014c)
+#define AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL_OFFSET 0x0150
+#define AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0150)
+
+/* CM.WKUP_CM register offsets */
+#define AM33XX_CM_WKUP_CLKSTCTRL_OFFSET 0x0000
+#define AM33XX_CM_WKUP_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0000)
+#define AM33XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET 0x0004
+#define AM33XX_CM_WKUP_CONTROL_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0004)
+#define AM33XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET 0x0008
+#define AM33XX_CM_WKUP_GPIO0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0008)
+#define AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET 0x000c
+#define AM33XX_CM_WKUP_L4WKUP_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x000c)
+#define AM33XX_CM_WKUP_TIMER0_CLKCTRL_OFFSET 0x0010
+#define AM33XX_CM_WKUP_TIMER0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0010)
+#define AM33XX_CM_WKUP_DEBUGSS_CLKCTRL_OFFSET 0x0014
+#define AM33XX_CM_WKUP_DEBUGSS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0014)
+#define AM33XX_CM_L3_AON_CLKSTCTRL_OFFSET 0x0018
+#define AM33XX_CM_L3_AON_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0018)
+#define AM33XX_CM_AUTOIDLE_DPLL_MPU_OFFSET 0x001c
+#define AM33XX_CM_AUTOIDLE_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x001c)
+#define AM33XX_CM_IDLEST_DPLL_MPU_OFFSET 0x0020
+#define AM33XX_CM_IDLEST_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0020)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET 0x0024
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0024)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET 0x0028
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0028)
+#define AM33XX_CM_CLKSEL_DPLL_MPU_OFFSET 0x002c
+#define AM33XX_CM_CLKSEL_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x002c)
+#define AM33XX_CM_AUTOIDLE_DPLL_DDR_OFFSET 0x0030
+#define AM33XX_CM_AUTOIDLE_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0030)
+#define AM33XX_CM_IDLEST_DPLL_DDR_OFFSET 0x0034
+#define AM33XX_CM_IDLEST_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0034)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DDR_OFFSET 0x0038
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0038)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DDR_OFFSET 0x003c
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x003c)
+#define AM33XX_CM_CLKSEL_DPLL_DDR_OFFSET 0x0040
+#define AM33XX_CM_CLKSEL_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0040)
+#define AM33XX_CM_AUTOIDLE_DPLL_DISP_OFFSET 0x0044
+#define AM33XX_CM_AUTOIDLE_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0044)
+#define AM33XX_CM_IDLEST_DPLL_DISP_OFFSET 0x0048
+#define AM33XX_CM_IDLEST_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0048)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DISP_OFFSET 0x004c
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x004c)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DISP_OFFSET 0x0050
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0050)
+#define AM33XX_CM_CLKSEL_DPLL_DISP_OFFSET 0x0054
+#define AM33XX_CM_CLKSEL_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0054)
+#define AM33XX_CM_AUTOIDLE_DPLL_CORE_OFFSET 0x0058
+#define AM33XX_CM_AUTOIDLE_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0058)
+#define AM33XX_CM_IDLEST_DPLL_CORE_OFFSET 0x005c
+#define AM33XX_CM_IDLEST_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x005c)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET 0x0060
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0060)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET 0x0064
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0064)
+#define AM33XX_CM_CLKSEL_DPLL_CORE_OFFSET 0x0068
+#define AM33XX_CM_CLKSEL_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0068)
+#define AM33XX_CM_AUTOIDLE_DPLL_PER_OFFSET 0x006c
+#define AM33XX_CM_AUTOIDLE_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x006c)
+#define AM33XX_CM_IDLEST_DPLL_PER_OFFSET 0x0070
+#define AM33XX_CM_IDLEST_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0070)
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET 0x0074
+#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0074)
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET 0x0078
+#define AM33XX_CM_SSC_MODFREQDIV_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0078)
+#define AM33XX_CM_CLKDCOLDO_DPLL_PER_OFFSET 0x007c
+#define AM33XX_CM_CLKDCOLDO_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x007c)
+#define AM33XX_CM_DIV_M4_DPLL_CORE_OFFSET 0x0080
+#define AM33XX_CM_DIV_M4_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0080)
+#define AM33XX_CM_DIV_M5_DPLL_CORE_OFFSET 0x0084
+#define AM33XX_CM_DIV_M5_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0084)
+#define AM33XX_CM_CLKMODE_DPLL_MPU_OFFSET 0x0088
+#define AM33XX_CM_CLKMODE_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0088)
+#define AM33XX_CM_CLKMODE_DPLL_PER_OFFSET 0x008c
+#define AM33XX_CM_CLKMODE_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x008c)
+#define AM33XX_CM_CLKMODE_DPLL_CORE_OFFSET 0x0090
+#define AM33XX_CM_CLKMODE_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0090)
+#define AM33XX_CM_CLKMODE_DPLL_DDR_OFFSET 0x0094
+#define AM33XX_CM_CLKMODE_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0094)
+#define AM33XX_CM_CLKMODE_DPLL_DISP_OFFSET 0x0098
+#define AM33XX_CM_CLKMODE_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0098)
+#define AM33XX_CM_CLKSEL_DPLL_PERIPH_OFFSET 0x009c
+#define AM33XX_CM_CLKSEL_DPLL_PERIPH AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x009c)
+#define AM33XX_CM_DIV_M2_DPLL_DDR_OFFSET 0x00a0
+#define AM33XX_CM_DIV_M2_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a0)
+#define AM33XX_CM_DIV_M2_DPLL_DISP_OFFSET 0x00a4
+#define AM33XX_CM_DIV_M2_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a4)
+#define AM33XX_CM_DIV_M2_DPLL_MPU_OFFSET 0x00a8
+#define AM33XX_CM_DIV_M2_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a8)
+#define AM33XX_CM_DIV_M2_DPLL_PER_OFFSET 0x00ac
+#define AM33XX_CM_DIV_M2_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00ac)
+#define AM33XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET 0x00b0
+#define AM33XX_CM_WKUP_WKUP_M3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b0)
+#define AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET 0x00b4
+#define AM33XX_CM_WKUP_UART0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b4)
+#define AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET 0x00b8
+#define AM33XX_CM_WKUP_I2C0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b8)
+#define AM33XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET 0x00bc
+#define AM33XX_CM_WKUP_ADC_TSC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00bc)
+#define AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET 0x00c0
+#define AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c0)
+#define AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET 0x00c4
+#define AM33XX_CM_WKUP_TIMER1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c4)
+#define AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET 0x00c8
+#define AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c8)
+#define AM33XX_CM_L4_WKUP_AON_CLKSTCTRL_OFFSET 0x00cc
+#define AM33XX_CM_L4_WKUP_AON_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00cc)
+#define AM33XX_CM_WKUP_WDT0_CLKCTRL_OFFSET 0x00d0
+#define AM33XX_CM_WKUP_WDT0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d0)
+#define AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET 0x00d4
+#define AM33XX_CM_WKUP_WDT1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d4)
+#define AM33XX_CM_DIV_M6_DPLL_CORE_OFFSET 0x00d8
+#define AM33XX_CM_DIV_M6_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d8)
+
+/* CM.DPLL_CM register offsets */
+#define AM33XX_CLKSEL_TIMER7_CLK_OFFSET 0x0004
+#define AM33XX_CLKSEL_TIMER7_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0004)
+#define AM33XX_CLKSEL_TIMER2_CLK_OFFSET 0x0008
+#define AM33XX_CLKSEL_TIMER2_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0008)
+#define AM33XX_CLKSEL_TIMER3_CLK_OFFSET 0x000c
+#define AM33XX_CLKSEL_TIMER3_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x000c)
+#define AM33XX_CLKSEL_TIMER4_CLK_OFFSET 0x0010
+#define AM33XX_CLKSEL_TIMER4_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0010)
+#define AM33XX_CM_MAC_CLKSEL_OFFSET 0x0014
+#define AM33XX_CM_MAC_CLKSEL AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0014)
+#define AM33XX_CLKSEL_TIMER5_CLK_OFFSET 0x0018
+#define AM33XX_CLKSEL_TIMER5_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0018)
+#define AM33XX_CLKSEL_TIMER6_CLK_OFFSET 0x001c
+#define AM33XX_CLKSEL_TIMER6_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x001c)
+#define AM33XX_CM_CPTS_RFT_CLKSEL_OFFSET 0x0020
+#define AM33XX_CM_CPTS_RFT_CLKSEL AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0020)
+#define AM33XX_CLKSEL_TIMER1MS_CLK_OFFSET 0x0028
+#define AM33XX_CLKSEL_TIMER1MS_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0028)
+#define AM33XX_CLKSEL_GFX_FCLK_OFFSET 0x002c
+#define AM33XX_CLKSEL_GFX_FCLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x002c)
+#define AM33XX_CLKSEL_PRUSS_OCP_CLK_OFFSET 0x0030
+#define AM33XX_CLKSEL_PRUSS_OCP_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0030)
+#define AM33XX_CLKSEL_LCDC_PIXEL_CLK_OFFSET 0x0034
+#define AM33XX_CLKSEL_LCDC_PIXEL_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0034)
+#define AM33XX_CLKSEL_WDT1_CLK_OFFSET 0x0038
+#define AM33XX_CLKSEL_WDT1_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0038)
+#define AM33XX_CLKSEL_GPIO0_DBCLK_OFFSET 0x003c
+#define AM33XX_CLKSEL_GPIO0_DBCLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x003c)
+
+/* CM.MPU_CM register offsets */
+#define AM33XX_CM_MPU_CLKSTCTRL_OFFSET 0x0000
+#define AM33XX_CM_MPU_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_MPU_MOD, 0x0000)
+#define AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET 0x0004
+#define AM33XX_CM_MPU_MPU_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_MPU_MOD, 0x0004)
+
+/* CM.DEVICE_CM register offsets */
+#define AM33XX_CM_CLKOUT_CTRL_OFFSET 0x0000
+#define AM33XX_CM_CLKOUT_CTRL AM33XX_CM_REGADDR(AM33XX_CM_DEVICE_MOD, 0x0000)
+
+/* CM.RTC_CM register offsets */
+#define AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET 0x0000
+#define AM33XX_CM_RTC_RTC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_RTC_MOD, 0x0000)
+#define AM33XX_CM_RTC_CLKSTCTRL_OFFSET 0x0004
+#define AM33XX_CM_RTC_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_RTC_MOD, 0x0004)
+
+/* CM.GFX_CM register offsets */
+#define AM33XX_CM_GFX_L3_CLKSTCTRL_OFFSET 0x0000
+#define AM33XX_CM_GFX_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0000)
+#define AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET 0x0004
+#define AM33XX_CM_GFX_GFX_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0004)
+#define AM33XX_CM_GFX_BITBLT_CLKCTRL_OFFSET 0x0008
+#define AM33XX_CM_GFX_BITBLT_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0008)
+#define AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1_OFFSET 0x000c
+#define AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1 AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x000c)
+#define AM33XX_CM_GFX_MMUCFG_CLKCTRL_OFFSET 0x0010
+#define AM33XX_CM_GFX_MMUCFG_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0010)
+#define AM33XX_CM_GFX_MMUDATA_CLKCTRL_OFFSET 0x0014
+#define AM33XX_CM_GFX_MMUDATA_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0014)
+
+/* CM.CEFUSE_CM register offsets */
+#define AM33XX_CM_CEFUSE_CLKSTCTRL_OFFSET 0x0000
+#define AM33XX_CM_CEFUSE_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0000)
+#define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET 0x0020
+#define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0020)
+
+
+extern bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs);
+extern void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs);
+extern void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs);
+extern void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs);
+extern void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs);
+
+#ifdef CONFIG_SOC_AM33XX
+extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs);
+extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs);
+extern void am33xx_cm_module_disable(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs);
+extern int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs);
+#else
+static inline int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+ return 0;
+}
+static inline void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+}
+static inline void am33xx_cm_module_disable(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+}
+static inline int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+ return 0;
+}
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 8c86d29..1894015 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -235,20 +235,6 @@
}
/**
- * omap4_cminst_clkdm_force_sleep - try to put a clockdomain into idle
- * @part: PRCM partition ID that the clockdomain registers exist in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- *
- * Put a clockdomain referred to by (@part, @inst, @cdoffs) into idle
- * No return value.
- */
-void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs)
-{
- _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs);
-}
-
-/**
* omap4_cminst_clkdm_force_sleep - try to take a clockdomain out of idle
* @part: PRCM partition ID that the clockdomain registers exist in
* @inst: CM instance register offset (*_INST macro)
@@ -313,9 +299,9 @@
omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
- MAX_MODULE_READY_TIME, i);
+ MAX_MODULE_DISABLE_TIME, i);
- return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+ return (i < MAX_MODULE_DISABLE_TIME) ? 0 : -EBUSY;
}
/**
diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h
index a018a73..d69fdef 100644
--- a/arch/arm/mach-omap2/cminst44xx.h
+++ b/arch/arm/mach-omap2/cminst44xx.h
@@ -16,38 +16,13 @@
extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs);
extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
-
extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
-
-# ifdef CONFIG_ARCH_OMAP4
extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs);
-
extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs);
extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs);
-
-# else
-
-static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
- u16 clkctrl_offs)
-{
- return 0;
-}
-
-static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
- s16 cdoffs, u16 clkctrl_offs)
-{
-}
-
-static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
- u16 clkctrl_offs)
-{
-}
-
-# endif
-
/*
* In an ideal world, we would not export these low-level functions,
* but this will probably take some time to fix properly
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 1706ebc..1473474 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -35,6 +35,16 @@
.turbo_mode = 0,
};
+/*
+ * ADS7846 driver maybe request a gpio according to the value
+ * of pdata->get_pendown_state, but we have done this. So set
+ * get_pendown_state to avoid twice gpio requesting.
+ */
+static int omap3_get_pendown_state(void)
+{
+ return !gpio_get_value(OMAP3_EVM_TS_GPIO);
+}
+
static struct ads7846_platform_data ads7846_config = {
.x_max = 0x0fff,
.y_max = 0x0fff,
@@ -45,6 +55,7 @@
.debounce_rep = 1,
.gpio_pendown = -EINVAL,
.keep_vref_on = 1,
+ .get_pendown_state = &omap3_get_pendown_state,
};
static struct spi_board_info ads7846_spi_board_info __initdata = {
@@ -63,28 +74,30 @@
struct spi_board_info *spi_bi = &ads7846_spi_board_info;
int err;
- if (board_pdata && board_pdata->get_pendown_state) {
- err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
- if (err) {
- pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
- return;
- }
- gpio_export(gpio_pendown, 0);
-
- if (gpio_debounce)
- gpio_set_debounce(gpio_pendown, gpio_debounce);
+ err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+ if (err) {
+ pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+ return;
}
+ if (gpio_debounce)
+ gpio_set_debounce(gpio_pendown, gpio_debounce);
+
spi_bi->bus_num = bus_num;
spi_bi->irq = gpio_to_irq(gpio_pendown);
if (board_pdata) {
board_pdata->gpio_pendown = gpio_pendown;
spi_bi->platform_data = board_pdata;
+ if (board_pdata->get_pendown_state)
+ gpio_export(gpio_pendown, 0);
} else {
ads7846_config.gpio_pendown = gpio_pendown;
}
+ if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state))
+ gpio_free(gpio_pendown);
+
spi_register_board_info(&ads7846_spi_board_info, 1);
}
#else
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index a0b4a428..4c4ef6a 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -4,6 +4,7 @@
#include "twl-common.h"
#define NAND_BLOCK_SIZE SZ_128K
+#define OMAP3_EVM_TS_GPIO 175
struct mtd_partition;
struct ads7846_platform_data;
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 8a6953a..069f972 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -29,8 +29,6 @@
/* Global address base setup code */
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-
static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
{
omap2_set_globals_tap(omap2_globals);
@@ -39,8 +37,6 @@
omap2_set_globals_prcm(omap2_globals);
}
-#endif
-
#if defined(CONFIG_SOC_OMAP2420)
static struct omap_globals omap242x_globals = {
@@ -134,7 +130,9 @@
{
omapti81xx_map_common_io();
}
+#endif
+#if defined(CONFIG_SOC_AM33XX)
#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + \
TI81XX_CONTROL_DEVICE_ID - 0x204)
@@ -171,9 +169,7 @@
void __init omap2_set_globals_443x(void)
{
- omap2_set_globals_tap(&omap4_globals);
- omap2_set_globals_control(&omap4_globals);
- omap2_set_globals_prcm(&omap4_globals);
+ __omap2_set_globals(&omap4_globals);
}
void __init omap4_map_io(void)
@@ -182,3 +178,27 @@
}
#endif
+#if defined(CONFIG_SOC_OMAP5)
+static struct omap_globals omap5_globals = {
+ .class = OMAP54XX_CLASS,
+ .tap = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
+ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
+ .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
+ .cm2 = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE),
+ .prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE),
+};
+
+void __init omap2_set_globals_5xxx(void)
+{
+ omap2_set_globals_tap(&omap5_globals);
+ omap2_set_globals_control(&omap5_globals);
+ omap2_set_globals_prcm(&omap5_globals);
+}
+
+void __init omap5_map_io(void)
+{
+ omap5_map_common_io();
+}
+#endif
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index be9dfd1..1f65b18 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -115,12 +115,22 @@
}
#endif
+#ifdef CONFIG_SOC_OMAP5
+extern void omap5_map_common_io(void);
+#else
+static inline void omap5_map_common_io(void)
+{
+}
+#endif
+
extern void omap2_init_common_infrastructure(void);
extern struct sys_timer omap2_timer;
extern struct sys_timer omap3_timer;
extern struct sys_timer omap3_secure_timer;
+extern struct sys_timer omap3_am33xx_timer;
extern struct sys_timer omap4_timer;
+extern struct sys_timer omap5_timer;
void omap2420_init_early(void);
void omap2430_init_early(void);
@@ -128,9 +138,12 @@
void omap35xx_init_early(void);
void omap3630_init_early(void);
void omap3_init_early(void); /* Do not use this one */
+void am33xx_init_early(void);
void am35xx_init_early(void);
void ti81xx_init_early(void);
+void am33xx_init_early(void);
void omap4430_init_early(void);
+void omap5_init_early(void);
void omap3_init_late(void); /* Do not use this one */
void omap4430_init_late(void);
void omap2420_init_late(void);
@@ -166,12 +179,18 @@
void omap2_set_globals_243x(void);
void omap2_set_globals_3xxx(void);
void omap2_set_globals_443x(void);
+void omap2_set_globals_5xxx(void);
void omap2_set_globals_ti81xx(void);
void omap2_set_globals_am33xx(void);
/* These get called from omap2_set_globals_xxxx(), do not call these */
void omap2_set_globals_tap(struct omap_globals *);
+#if defined(CONFIG_SOC_HAS_OMAP2_SDRC)
void omap2_set_globals_sdrc(struct omap_globals *);
+#else
+static inline void omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
+{ }
+#endif
void omap2_set_globals_control(struct omap_globals *);
void omap2_set_globals_prcm(struct omap_globals *);
@@ -180,6 +199,7 @@
void omap3_map_io(void);
void am33xx_map_io(void);
void omap4_map_io(void);
+void omap5_map_io(void);
void ti81xx_map_io(void);
void omap_barriers_init(void);
@@ -219,6 +239,8 @@
void omap3_intc_resume_idle(void);
void omap2_intc_handle_irq(struct pt_regs *regs);
void omap3_intc_handle_irq(struct pt_regs *regs);
+void omap_intc_of_init(void);
+void omap_gic_of_init(void);
#ifdef CONFIG_CACHE_L2X0
extern void __iomem *omap4_get_l2cache_base(void);
@@ -226,10 +248,10 @@
struct device_node;
#ifdef CONFIG_OF
-int __init omap_intc_of_init(struct device_node *node,
+int __init intc_of_init(struct device_node *node,
struct device_node *parent);
#else
-int __init omap_intc_of_init(struct device_node *node,
+int __init intc_of_init(struct device_node *node,
struct device_node *parent)
{
return 0;
@@ -256,6 +278,7 @@
extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
extern void omap_auxcoreboot_addr(u32 cpu_addr);
extern u32 omap_read_auxcoreboot0(void);
+extern void omap5_secondary_startup(void);
#endif
#if defined(CONFIG_SMP) && defined(CONFIG_PM)
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 08e674b..3223b81 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -241,6 +241,49 @@
#endif
+/**
+ * omap_ctrl_write_dsp_boot_addr - set boot address for a remote processor
+ * @bootaddr: physical address of the boot loader
+ *
+ * Set boot address for the boot loader of a supported processor
+ * when a power ON sequence occurs.
+ */
+void omap_ctrl_write_dsp_boot_addr(u32 bootaddr)
+{
+ u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR :
+ cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR :
+ cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
+ 0;
+
+ if (!offset) {
+ pr_err("%s: unsupported omap type\n", __func__);
+ return;
+ }
+
+ omap_ctrl_writel(bootaddr, offset);
+}
+
+/**
+ * omap_ctrl_write_dsp_boot_mode - set boot mode for a remote processor
+ * @bootmode: 8-bit value to pass to some boot code
+ *
+ * Sets boot mode for the boot loader of a supported processor
+ * when a power ON sequence occurs.
+ */
+void omap_ctrl_write_dsp_boot_mode(u8 bootmode)
+{
+ u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTMOD :
+ cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTMOD :
+ 0;
+
+ if (!offset) {
+ pr_err("%s: unsupported omap type\n", __func__);
+ return;
+ }
+
+ omap_ctrl_writel(bootmode, offset);
+}
+
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
/*
* Clears the scratchpad contents in case of cold boot-
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index a406fd0..b8cdc85 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -21,6 +21,8 @@
#include <mach/ctrl_module_pad_core_44xx.h>
#include <mach/ctrl_module_pad_wkup_44xx.h>
+#include <plat/am33xx.h>
+
#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
@@ -28,6 +30,8 @@
OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define AM33XX_CTRL_REGADDR(reg) \
+ AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg))
#else
#define OMAP242X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
@@ -35,6 +39,8 @@
OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define AM33XX_CTRL_REGADDR(reg) \
+ AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg))
#endif /* __ASSEMBLY__ */
/*
@@ -182,6 +188,7 @@
#define OMAP3630_CONTROL_FUSE_OPP120_VDD1 (OMAP2_CONTROL_GENERAL + 0x0120)
#define OMAP3630_CONTROL_FUSE_OPP50_VDD2 (OMAP2_CONTROL_GENERAL + 0x0128)
#define OMAP3630_CONTROL_FUSE_OPP100_VDD2 (OMAP2_CONTROL_GENERAL + 0x012C)
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL (OMAP2_CONTROL_GENERAL + 0x02f0)
/* OMAP44xx control efuse offsets */
#define OMAP44XX_CONTROL_FUSE_IVA_OPP50 0x22C
@@ -246,6 +253,10 @@
/* TI81XX CONTROL_DEVCONF register offsets */
#define TI81XX_CONTROL_DEVICE_ID (TI81XX_CONTROL_DEVCONF + 0x000)
+/* OMAP54XX CONTROL STATUS register */
+#define OMAP5XXX_CONTROL_STATUS 0x134
+#define OMAP5_DEVICETYPE_MASK (0x7 << 6)
+
/*
* REVISIT: This list of registers is not comprehensive - there are more
* that should be added.
@@ -312,15 +323,15 @@
OMAP343X_SCRATCHPAD + reg)
/* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
-#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0
-#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1
-#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2
-#define AM35XX_HECC_VBUSP_CLK_SHIFT 3
-#define AM35XX_USBOTG_FCLK_SHIFT 8
-#define AM35XX_CPGMAC_FCLK_SHIFT 9
-#define AM35XX_VPFE_FCLK_SHIFT 10
+#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0
+#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1
+#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2
+#define AM35XX_HECC_VBUSP_CLK_SHIFT 3
+#define AM35XX_USBOTG_FCLK_SHIFT 8
+#define AM35XX_CPGMAC_FCLK_SHIFT 9
+#define AM35XX_VPFE_FCLK_SHIFT 10
-/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/
+/* AM35XX CONTROL_LVL_INTR_CLEAR bits */
#define AM35XX_CPGMAC_C0_MISC_PULSE_CLR BIT(0)
#define AM35XX_CPGMAC_C0_RX_PULSE_CLR BIT(1)
#define AM35XX_CPGMAC_C0_RX_THRESH_CLR BIT(2)
@@ -330,21 +341,22 @@
#define AM35XX_VPFE_CCDC_VD1_INT_CLR BIT(6)
#define AM35XX_VPFE_CCDC_VD2_INT_CLR BIT(7)
-/*AM35XX CONTROL_IP_SW_RESET bits*/
+/* AM35XX CONTROL_IP_SW_RESET bits */
#define AM35XX_USBOTGSS_SW_RST BIT(0)
#define AM35XX_CPGMACSS_SW_RST BIT(1)
#define AM35XX_VPFE_VBUSP_SW_RST BIT(2)
#define AM35XX_HECC_SW_RST BIT(3)
#define AM35XX_VPFE_PCLK_SW_RST BIT(4)
-/*
- * CONTROL AM33XX STATUS register
- */
+/* AM33XX CONTROL_STATUS register */
#define AM33XX_CONTROL_STATUS 0x040
+#define AM33XX_CONTROL_SEC_CLK_CTRL 0x1bc
-/*
- * CONTROL OMAP STATUS register to identify OMAP3 features
- */
+/* AM33XX CONTROL_STATUS bitfields (partial) */
+#define AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT 22
+#define AM33XX_CONTROL_STATUS_SYSBOOT1_MASK (0x3 << 22)
+
+/* CONTROL OMAP STATUS register to identify OMAP3 features */
#define OMAP3_CONTROL_OMAP_STATUS 0x044c
#define OMAP3_SGX_SHIFT 13
@@ -397,6 +409,8 @@
extern void omap3_control_save_context(void);
extern void omap3_control_restore_context(void);
extern void omap3_ctrl_write_boot_mode(u8 bootmode);
+extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr);
+extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
extern void omap3630_ctrl_disable_rta(void);
extern int omap3_ctrl_save_padconf(void);
#else
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 207bc1c..f2a49a48 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -36,8 +36,6 @@
#include "control.h"
#include "common.h"
-#ifdef CONFIG_CPU_IDLE
-
/* Mach specific information to be recorded in the C-state driver_data */
struct omap3_idle_statedata {
u32 mpu_state;
@@ -77,20 +75,6 @@
static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd;
-static int _cpuidle_allow_idle(struct powerdomain *pwrdm,
- struct clockdomain *clkdm)
-{
- clkdm_allow_idle(clkdm);
- return 0;
-}
-
-static int _cpuidle_deny_idle(struct powerdomain *pwrdm,
- struct clockdomain *clkdm)
-{
- clkdm_deny_idle(clkdm);
- return 0;
-}
-
static int __omap3_enter_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
@@ -108,8 +92,8 @@
/* Deny idle for C1 */
if (index == 0) {
- pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle);
- pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
+ clkdm_deny_idle(mpu_pd->pwrdm_clkdms[0]);
+ clkdm_deny_idle(core_pd->pwrdm_clkdms[0]);
}
/*
@@ -131,8 +115,8 @@
/* Re-allow idle for C1 */
if (index == 0) {
- pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
- pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle);
+ clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]);
+ clkdm_allow_idle(core_pd->pwrdm_clkdms[0]);
}
return_sleep_time:
@@ -178,7 +162,7 @@
u32 mpu_deepest_state = PWRDM_POWER_RET;
u32 core_deepest_state = PWRDM_POWER_RET;
int idx;
- int next_index = -1;
+ int next_index = 0; /* C1 is the default value */
if (enable_off_mode) {
mpu_deepest_state = PWRDM_POWER_OFF;
@@ -209,12 +193,6 @@
}
}
- /*
- * C1 is always valid.
- * So, no need to check for 'next_index == -1' outside
- * this loop.
- */
-
return next_index;
}
@@ -228,23 +206,22 @@
* the device to the specified or a safer state.
*/
static int omap3_enter_idle_bm(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
+ struct cpuidle_driver *drv,
int index)
{
int new_state_idx;
- u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state;
+ u32 core_next_state, per_next_state = 0, per_saved_state = 0;
struct omap3_idle_statedata *cx;
int ret;
/*
- * Prevent idle completely if CAM is active.
+ * Use only C1 if CAM is active.
* CAM does not have wakeup capability in OMAP3.
*/
- cam_state = pwrdm_read_pwrst(cam_pd);
- if (cam_state == PWRDM_POWER_ON) {
+ if (pwrdm_read_pwrst(cam_pd) == PWRDM_POWER_ON)
new_state_idx = drv->safe_state_index;
- goto select_state;
- }
+ else
+ new_state_idx = next_valid_state(dev, drv, index);
/*
* FIXME: we currently manage device-specific idle states
@@ -254,24 +231,28 @@
* its own code.
*/
- /*
- * Prevent PER off if CORE is not in retention or off as this
- * would disable PER wakeups completely.
- */
- cx = &omap3_idle_data[index];
+ /* Program PER state */
+ cx = &omap3_idle_data[new_state_idx];
core_next_state = cx->core_state;
per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd);
- if ((per_next_state == PWRDM_POWER_OFF) &&
- (core_next_state > PWRDM_POWER_RET))
- per_next_state = PWRDM_POWER_RET;
+ if (new_state_idx == 0) {
+ /* In C1 do not allow PER state lower than CORE state */
+ if (per_next_state < core_next_state)
+ per_next_state = core_next_state;
+ } else {
+ /*
+ * Prevent PER OFF if CORE is not in RETention or OFF as this
+ * would disable PER wakeups completely.
+ */
+ if ((per_next_state == PWRDM_POWER_OFF) &&
+ (core_next_state > PWRDM_POWER_RET))
+ per_next_state = PWRDM_POWER_RET;
+ }
/* Are we changing PER target state? */
if (per_next_state != per_saved_state)
pwrdm_set_next_pwrst(per_pd, per_next_state);
- new_state_idx = next_valid_state(dev, drv, index);
-
-select_state:
ret = omap3_enter_idle(dev, drv, new_state_idx);
/* Restore original PER state if it was modified */
@@ -288,7 +269,7 @@
.owner = THIS_MODULE,
.states = {
{
- .enter = omap3_enter_idle,
+ .enter = omap3_enter_idle_bm,
.exit_latency = 2 + 2,
.target_residency = 5,
.flags = CPUIDLE_FLAG_TIME_VALID,
@@ -379,9 +360,3 @@
return 0;
}
-#else
-int __init omap3_idle_init(void)
-{
- return 0;
-}
-#endif /* CONFIG_CPU_IDLE */
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index be1617c..02d15bb 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -22,8 +22,6 @@
#include "pm.h"
#include "prm.h"
-#ifdef CONFIG_CPU_IDLE
-
/* Machine specific information */
struct omap4_idle_statedata {
u32 cpu_state;
@@ -199,9 +197,3 @@
return 0;
}
-#else
-int __init omap4_idle_init(void)
-{
- return 0;
-}
-#endif /* CONFIG_CPU_IDLE */
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 7b4b932..c00c689 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -27,7 +27,6 @@
#include "iomap.h"
#include <plat/board.h>
-#include <plat/mmc.h>
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
@@ -84,7 +83,7 @@
* To avoid code running on other OMAPs in
* multi-omap builds
*/
- if (!(cpu_is_omap44xx()))
+ if (!cpu_is_omap44xx() && !soc_is_omap54xx())
return -ENODEV;
for (i = 0; i < L3_MODULES; i++) {
@@ -603,112 +602,6 @@
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-static inline void omap242x_mmc_mux(struct omap_mmc_platform_data
- *mmc_controller)
-{
- if ((mmc_controller->slots[0].switch_pin > 0) && \
- (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
- omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
- OMAP_PIN_INPUT_PULLUP);
- if ((mmc_controller->slots[0].gpio_wp > 0) && \
- (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
- omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
- OMAP_PIN_INPUT_PULLUP);
-
- omap_mux_init_signal("sdmmc_cmd", 0);
- omap_mux_init_signal("sdmmc_clki", 0);
- omap_mux_init_signal("sdmmc_clko", 0);
- omap_mux_init_signal("sdmmc_dat0", 0);
- omap_mux_init_signal("sdmmc_dat_dir0", 0);
- omap_mux_init_signal("sdmmc_cmd_dir", 0);
- if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
- omap_mux_init_signal("sdmmc_dat1", 0);
- omap_mux_init_signal("sdmmc_dat2", 0);
- omap_mux_init_signal("sdmmc_dat3", 0);
- omap_mux_init_signal("sdmmc_dat_dir1", 0);
- omap_mux_init_signal("sdmmc_dat_dir2", 0);
- omap_mux_init_signal("sdmmc_dat_dir3", 0);
- }
-
- /*
- * Use internal loop-back in MMC/SDIO Module Input Clock
- * selection
- */
- if (mmc_controller->slots[0].internal_clock) {
- u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- v |= (1 << 24);
- omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
- }
-}
-
-void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
- struct platform_device *pdev;
- struct omap_hwmod *oh;
- int id = 0;
- char *oh_name = "msdi1";
- char *dev_name = "mmci-omap";
-
- if (!mmc_data[0]) {
- pr_err("%s fails: Incomplete platform data\n", __func__);
- return;
- }
-
- omap242x_mmc_mux(mmc_data[0]);
-
- oh = omap_hwmod_lookup(oh_name);
- if (!oh) {
- pr_err("Could not look up %s\n", oh_name);
- return;
- }
- pdev = omap_device_build(dev_name, id, oh, mmc_data[0],
- sizeof(struct omap_mmc_platform_data), NULL, 0, 0);
- if (IS_ERR(pdev))
- WARN(1, "Can'd build omap_device for %s:%s.\n",
- dev_name, oh->name);
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
-#define OMAP_HDQ_BASE 0x480B2000
-static struct resource omap_hdq_resources[] = {
- {
- .start = OMAP_HDQ_BASE,
- .end = OMAP_HDQ_BASE + 0x1C,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_24XX_HDQ_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-static struct platform_device omap_hdq_dev = {
- .name = "omap_hdq",
- .id = 0,
- .dev = {
- .platform_data = NULL,
- },
- .num_resources = ARRAY_SIZE(omap_hdq_resources),
- .resource = omap_hdq_resources,
-};
-static inline void omap_hdq_init(void)
-{
- if (cpu_is_omap2420())
- return;
-
- platform_device_register(&omap_hdq_dev);
-}
-#else
-static inline void omap_hdq_init(void) {}
-#endif
-
-/*---------------------------------------------------------------------------*/
-
#if defined(CONFIG_VIDEO_OMAP2_VOUT) || \
defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE)
#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
@@ -753,7 +646,6 @@
omap_init_mcspi();
}
omap_init_pmu();
- omap_hdq_init();
omap_init_sti();
omap_init_sham();
omap_init_aes();
@@ -772,7 +664,7 @@
char *oh_name = "wd_timer2";
char *dev_name = "omap_wdt";
- if (!cpu_class_is_omap2())
+ if (!cpu_class_is_omap2() || of_have_populated_dt())
return 0;
oh = omap_hwmod_lookup(oh_name);
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 54d49dd..5fb47a1 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -271,9 +271,9 @@
goto err;
}
- r = omap_device_register(pdev);
+ r = platform_device_add(pdev);
if (r) {
- pr_err("Could not register omap_device for %s\n", pdev_name);
+ pr_err("Could not register platform_device for %s\n", pdev_name);
goto err;
}
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index f0f10be..b9c8d2f 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -135,11 +135,20 @@
*/
static int _omap3_noncore_dpll_lock(struct clk *clk)
{
+ const struct dpll_data *dd;
u8 ai;
- int r;
+ u8 state = 1;
+ int r = 0;
pr_debug("clock: locking DPLL %s\n", clk->name);
+ dd = clk->dpll_data;
+ state <<= __ffs(dd->idlest_mask);
+
+ /* Check if already locked */
+ if ((__raw_readl(dd->idlest_reg) & dd->idlest_mask) == state)
+ goto done;
+
ai = omap3_dpll_autoidle_read(clk);
if (ai)
@@ -152,6 +161,7 @@
if (ai)
omap3_dpll_allow_idle(clk);
+done:
return r;
}
@@ -628,3 +638,17 @@
rate = clk->parent->rate * 2;
return rate;
}
+
+/* OMAP3/4 non-CORE DPLL clkops */
+
+const struct clkops clkops_omap3_noncore_dpll_ops = {
+ .enable = omap3_noncore_dpll_enable,
+ .disable = omap3_noncore_dpll_disable,
+ .allow_idle = omap3_dpll_allow_idle,
+ .deny_idle = omap3_dpll_deny_idle,
+};
+
+const struct clkops clkops_omap3_core_dpll_ops = {
+ .allow_idle = omap3_dpll_allow_idle,
+ .deny_idle = omap3_dpll_deny_idle,
+};
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
new file mode 100644
index 0000000..72e0f01b
--- /dev/null
+++ b/arch/arm/mach-omap2/drm.c
@@ -0,0 +1,61 @@
+/*
+ * DRM/KMS device registration for TI OMAP platforms
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/omap_device.h>
+#include <plat/omap_hwmod.h>
+
+#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
+
+static struct platform_device omap_drm_device = {
+ .dev = {
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .name = "omapdrm",
+ .id = 0,
+};
+
+static int __init omap_init_drm(void)
+{
+ struct omap_hwmod *oh = NULL;
+ struct platform_device *pdev;
+
+ /* lookup and populate the DMM information, if present - OMAP4+ */
+ oh = omap_hwmod_lookup("dmm");
+
+ if (oh) {
+ pdev = omap_device_build(oh->name, -1, oh, NULL, 0, NULL, 0,
+ false);
+ WARN(IS_ERR(pdev), "Could not build omap_device for %s\n",
+ oh->name);
+ }
+
+ return platform_device_register(&omap_drm_device);
+
+}
+
+arch_initcall(omap_init_drm);
+
+#endif
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index 845309f..a636ebc 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -20,6 +20,10 @@
#include <linux/module.h>
#include <linux/platform_device.h>
+
+#include <asm/memblock.h>
+
+#include "control.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#ifdef CONFIG_BRIDGE_DVFS
@@ -43,6 +47,9 @@
.dsp_cm_read = omap2_cm_read_mod_reg,
.dsp_cm_write = omap2_cm_write_mod_reg,
.dsp_cm_rmw_bits = omap2_cm_rmw_mod_reg_bits,
+
+ .set_bootaddr = omap_ctrl_write_dsp_boot_addr,
+ .set_bootmode = omap_ctrl_write_dsp_boot_mode,
};
static phys_addr_t omap_dsp_phys_mempool_base;
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 2286410..b2b5759 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -727,7 +727,8 @@
ck = "gpmc_fck";
l = OMAP34XX_GPMC_BASE;
gpmc_irq = INT_34XX_GPMC_IRQ;
- } else if (cpu_is_omap44xx()) {
+ } else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
+ /* Base address and irq number are same for OMAP4/5 */
ck = "gpmc_ck";
l = OMAP44XX_GPMC_BASE;
gpmc_irq = OMAP44XX_IRQ_GPMC;
diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c
index 297ebe0..cdd6dda 100644
--- a/arch/arm/mach-omap2/hdq1w.c
+++ b/arch/arm/mach-omap2/hdq1w.c
@@ -22,7 +22,13 @@
* 02110-1301 USA
*/
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
#include <plat/hdq1w.h>
#include "common.h"
@@ -70,3 +76,23 @@
return 0;
}
+
+static int __init omap_init_hdq(void)
+{
+ int id = -1;
+ struct platform_device *pdev;
+ struct omap_hwmod *oh;
+ char *oh_name = "hdq1w";
+ char *devname = "omap_hdq";
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh)
+ return 0;
+
+ pdev = omap_device_build(devname, id, oh, NULL, 0, NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
+ devname, oh->name);
+
+ return 0;
+}
+arch_initcall(omap_init_hdq);
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 0389b32..40373db 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -44,12 +44,17 @@
if (cpu_is_omap24xx()) {
val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
- } else if (cpu_is_am33xx()) {
+ } else if (soc_is_am33xx()) {
val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
} else if (cpu_is_omap34xx()) {
val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
} else if (cpu_is_omap44xx()) {
val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
+ } else if (soc_is_omap54xx()) {
+ val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS);
+ val &= OMAP5_DEVICETYPE_MASK;
+ val >>= 6;
+ goto out;
} else {
pr_err("Cannot detect omap type!\n");
goto out;
@@ -100,7 +105,7 @@
void omap_get_die_id(struct omap_die_id *odi)
{
- if (cpu_is_omap44xx()) {
+ if (cpu_is_omap44xx() || soc_is_omap54xx()) {
odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1);
odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2);
@@ -189,7 +194,7 @@
cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
} else if (cpu_is_ti816x()) {
cpu_name = "TI816X";
- } else if (cpu_is_am335x()) {
+ } else if (soc_is_am335x()) {
cpu_name = "AM335X";
} else if (cpu_is_ti814x()) {
cpu_name = "TI814X";
@@ -247,6 +252,17 @@
omap_features |= OMAP3_HAS_SDRC;
/*
+ * am35x fixups:
+ * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as
+ * reserved and therefore return 0 when read. Unfortunately,
+ * OMAP3_CHECK_FEATURE() will interpret some of those zeroes to
+ * mean that a feature is present even though it isn't so clear
+ * the incorrectly set feature bits.
+ */
+ if (soc_is_am35xx())
+ omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP);
+
+ /*
* TODO: Get additional info (where applicable)
* e.g. Size of L2 cache.
*/
@@ -502,6 +518,41 @@
((omap_rev() >> 12) & 0xf), ((omap_rev() >> 8) & 0xf));
}
+void __init omap5xxx_check_revision(void)
+{
+ u32 idcode;
+ u16 hawkeye;
+ u8 rev;
+
+ idcode = read_tap_reg(OMAP_TAP_IDCODE);
+ hawkeye = (idcode >> 12) & 0xffff;
+ rev = (idcode >> 28) & 0xff;
+ switch (hawkeye) {
+ case 0xb942:
+ switch (rev) {
+ case 0:
+ default:
+ omap_revision = OMAP5430_REV_ES1_0;
+ }
+ break;
+
+ case 0xb998:
+ switch (rev) {
+ case 0:
+ default:
+ omap_revision = OMAP5432_REV_ES1_0;
+ }
+ break;
+
+ default:
+ /* Unknown default to latest silicon rev as default*/
+ omap_revision = OMAP5430_REV_ES1_0;
+ }
+
+ pr_info("OMAP%04x ES%d.0\n",
+ omap_rev() >> 16, ((omap_rev() >> 12) & 0xf));
+}
+
/*
* Set up things for map_io and processor detection later on. Gets called
* pretty much first thing from board init. For multi-omap, this gets
diff --git a/arch/arm/mach-omap2/include/mach/am35xx.h b/arch/arm/mach-omap2/include/mach/am35xx.h
index f1e13d1..9559449 100644
--- a/arch/arm/mach-omap2/include/mach/am35xx.h
+++ b/arch/arm/mach-omap2/include/mach/am35xx.h
@@ -36,6 +36,8 @@
#define AM35XX_EMAC_CNTRL_MOD_OFFSET (0x0)
#define AM35XX_EMAC_CNTRL_RAM_OFFSET (0x20000)
#define AM35XX_EMAC_MDIO_OFFSET (0x30000)
+#define AM35XX_IPSS_MDIO_BASE (AM35XX_IPSS_EMAC_BASE + \
+ AM35XX_EMAC_MDIO_OFFSET)
#define AM35XX_EMAC_CNTRL_RAM_SIZE (0x2000)
#define AM35XX_EMAC_RAM_ADDR (AM3517_EMAC_BASE + \
AM3517_EMAC_CNTRL_RAM_OFFSET)
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h
index 2f7ac70..0197082 100644
--- a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h
+++ b/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h
@@ -42,6 +42,7 @@
#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1 0x0268
#define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4
#define OMAP4_CTRL_MODULE_CORE_DEV_CONF 0x0300
+#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR 0x0304
#define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL 0x0314
#define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL 0x0318
#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL 0x0320
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index cdfc2a1..93d10de 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -60,18 +60,20 @@
beq 23f @ configure OMAP2UART3
cmp \rp, #OMAP3UART3 @ only on 34xx
beq 33f @ configure OMAP3UART3
- cmp \rp, #OMAP4UART3 @ only on 44xx
- beq 43f @ configure OMAP4UART3
+ cmp \rp, #OMAP4UART3 @ only on 44xx/54xx
+ beq 43f @ configure OMAP4/5UART3
cmp \rp, #OMAP3UART4 @ only on 36xx
beq 34f @ configure OMAP3UART4
- cmp \rp, #OMAP4UART4 @ only on 44xx
- beq 44f @ configure OMAP4UART4
+ cmp \rp, #OMAP4UART4 @ only on 44xx/54xx
+ beq 44f @ configure OMAP4/5UART4
cmp \rp, #TI81XXUART1 @ ti81Xx UART offsets different
beq 81f @ configure UART1
cmp \rp, #TI81XXUART2 @ ti81Xx UART offsets different
beq 82f @ configure UART2
cmp \rp, #TI81XXUART3 @ ti81Xx UART offsets different
beq 83f @ configure UART3
+ cmp \rp, #AM33XXUART1 @ AM33XX UART offsets different
+ beq 84f @ configure UART1
cmp \rp, #ZOOM_UART @ only on zoom2/3
beq 95f @ configure ZOOM_UART
@@ -100,7 +102,9 @@
b 98f
83: mov \rp, #UART_OFFSET(TI81XX_UART3_BASE)
b 98f
-
+84: ldr \rp, =AM33XX_UART1_BASE
+ and \rp, \rp, #0x00ffffff
+ b 97f
95: ldr \rp, =ZOOM_UART_BASE
str \rp, [\tmp, #0] @ omap_uart_phys
ldr \rp, =ZOOM_UART_VIRT
@@ -109,6 +113,17 @@
str \rp, [\tmp, #8] @ omap_uart_lsr
b 10b
+ /* AM33XX: Store both phys and virt address for the uart */
+97: add \rp, \rp, #0x44000000 @ phys base
+ str \rp, [\tmp, #0] @ omap_uart_phys
+ sub \rp, \rp, #0x44000000 @ phys base
+ add \rp, \rp, #0xf9000000 @ virt base
+ str \rp, [\tmp, #4] @ omap_uart_virt
+ mov \rp, #(UART_LSR << OMAP_PORT_SHIFT)
+ str \rp, [\tmp, #8] @ omap_uart_lsr
+
+ b 10b
+
/* Store both phys and virt address for the uart */
98: add \rp, \rp, #0x48000000 @ phys base
str \rp, [\tmp, #0] @ omap_uart_phys
diff --git a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h b/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
index 548de90b..b0fd16f 100644
--- a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
+++ b/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
@@ -11,15 +11,20 @@
#ifndef OMAP_ARCH_WAKEUPGEN_H
#define OMAP_ARCH_WAKEUPGEN_H
+/* OMAP4 and OMAP5 has same base address */
+#define OMAP_WKUPGEN_BASE 0x48281000
+
#define OMAP_WKG_CONTROL_0 0x00
#define OMAP_WKG_ENB_A_0 0x10
#define OMAP_WKG_ENB_B_0 0x14
#define OMAP_WKG_ENB_C_0 0x18
#define OMAP_WKG_ENB_D_0 0x1c
+#define OMAP_WKG_ENB_E_0 0x20
#define OMAP_WKG_ENB_A_1 0x410
#define OMAP_WKG_ENB_B_1 0x414
#define OMAP_WKG_ENB_C_1 0x418
#define OMAP_WKG_ENB_D_1 0x41c
+#define OMAP_WKG_ENB_E_1 0x420
#define OMAP_AUX_CORE_BOOT_0 0x800
#define OMAP_AUX_CORE_BOOT_1 0x804
#define OMAP_PTMSYNCREQ_MASK 0xc00
@@ -28,4 +33,6 @@
#define OMAP_TIMESTAMPCYCLEHI 0xc0c
extern int __init omap_wakeupgen_init(void);
+extern void __iomem *omap_get_wakeupgen_base(void);
+extern int omap_secure_apis_support(void);
#endif
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 8d014ba..4d2d981 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -38,6 +38,7 @@
#include "powerdomain.h"
#include "clockdomain.h"
#include "common.h"
+#include "clock.h"
#include "clock2xxx.h"
#include "clock3xxx.h"
#include "clock44xx.h"
@@ -233,6 +234,35 @@
};
#endif
+#ifdef CONFIG_SOC_OMAP5
+static struct map_desc omap54xx_io_desc[] __initdata = {
+ {
+ .virtual = L3_54XX_VIRT,
+ .pfn = __phys_to_pfn(L3_54XX_PHYS),
+ .length = L3_54XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_54XX_VIRT,
+ .pfn = __phys_to_pfn(L4_54XX_PHYS),
+ .length = L4_54XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_WK_54XX_VIRT,
+ .pfn = __phys_to_pfn(L4_WK_54XX_PHYS),
+ .length = L4_WK_54XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_PER_54XX_VIRT,
+ .pfn = __phys_to_pfn(L4_PER_54XX_PHYS),
+ .length = L4_PER_54XX_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+#endif
+
#ifdef CONFIG_SOC_OMAP2420
void __init omap242x_map_common_io(void)
{
@@ -278,6 +308,12 @@
}
#endif
+#ifdef CONFIG_SOC_OMAP5
+void __init omap5_map_common_io(void)
+{
+ iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
+}
+#endif
/*
* omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
*
@@ -477,6 +513,20 @@
}
#endif
+#ifdef CONFIG_SOC_AM33XX
+void __init am33xx_init_early(void)
+{
+ omap2_set_globals_am33xx();
+ omap3xxx_check_revision();
+ ti81xx_check_features();
+ omap_common_init_early();
+ am33xx_voltagedomains_init();
+ am33xx_powerdomains_init();
+ am33xx_clockdomains_init();
+ am33xx_clk_init();
+}
+#endif
+
#ifdef CONFIG_ARCH_OMAP4
void __init omap4430_init_early(void)
{
@@ -500,6 +550,15 @@
}
#endif
+#ifdef CONFIG_SOC_OMAP5
+void __init omap5_init_early(void)
+{
+ omap2_set_globals_5xxx();
+ omap5xxx_check_revision();
+ omap_common_init_early();
+}
+#endif
+
void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
diff --git a/arch/arm/mach-omap2/iomap.h b/arch/arm/mach-omap2/iomap.h
index 80b8892..cce2b65 100644
--- a/arch/arm/mach-omap2/iomap.h
+++ b/arch/arm/mach-omap2/iomap.h
@@ -1,6 +1,14 @@
/*
* IO mappings for OMAP2+
*
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Copyright (C) 2009-2012 Texas Instruments
+ * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -166,4 +174,23 @@
/* 0x49000000 --> 0xfb000000 */
#define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_ABE_44XX_SIZE SZ_1M
+/*
+ * ----------------------------------------------------------------------------
+ * Omap5 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+#define L3_54XX_PHYS L3_54XX_BASE /* 0x44000000 --> 0xf8000000 */
+#define L3_54XX_VIRT (L3_54XX_PHYS + OMAP4_L3_IO_OFFSET)
+#define L3_54XX_SIZE SZ_1M
+#define L4_54XX_PHYS L4_54XX_BASE /* 0x4a000000 --> 0xfc000000 */
+#define L4_54XX_VIRT (L4_54XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_54XX_SIZE SZ_4M
+
+#define L4_WK_54XX_PHYS L4_WK_54XX_BASE /* 0x4ae00000 --> 0xfce00000 */
+#define L4_WK_54XX_VIRT (L4_WK_54XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_WK_54XX_SIZE SZ_2M
+
+#define L4_PER_54XX_PHYS L4_PER_54XX_BASE /* 0x48000000 --> 0xfa000000 */
+#define L4_PER_54XX_VIRT (L4_PER_54XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_PER_54XX_SIZE SZ_4M
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index fdc4303..bcd83db 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -21,6 +21,7 @@
#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <mach/hardware.h>
@@ -149,6 +150,7 @@
ct->chip.irq_ack = omap_mask_ack_irq;
ct->chip.irq_mask = irq_gc_mask_disable_reg;
ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+ ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE;
ct->regs.enable = INTC_MIR_CLEAR0;
ct->regs.disable = INTC_MIR_SET0;
@@ -257,11 +259,11 @@
omap_intc_handle_irq(base_addr, regs);
}
-int __init omap_intc_of_init(struct device_node *node,
+int __init intc_of_init(struct device_node *node,
struct device_node *parent)
{
struct resource res;
- u32 nr_irqs = 96;
+ u32 nr_irq = 96;
if (WARN_ON(!node))
return -ENODEV;
@@ -271,15 +273,25 @@
return -EINVAL;
}
- if (of_property_read_u32(node, "ti,intc-size", &nr_irqs))
- pr_warn("unable to get intc-size, default to %d\n", nr_irqs);
+ if (of_property_read_u32(node, "ti,intc-size", &nr_irq))
+ pr_warn("unable to get intc-size, default to %d\n", nr_irq);
- omap_init_irq(res.start, nr_irqs, of_node_get(node));
+ omap_init_irq(res.start, nr_irq, of_node_get(node));
return 0;
}
-#ifdef CONFIG_ARCH_OMAP3
+static struct of_device_id irq_match[] __initdata = {
+ { .compatible = "ti,omap2-intc", .data = intc_of_init, },
+ { }
+};
+
+void __init omap_intc_of_init(void)
+{
+ of_irq_init(irq_match);
+}
+
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
void omap_intc_save_context(void)
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 19b8b67..6875be8 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -83,8 +83,6 @@
l = mbox_read_reg(MAILBOX_REVISION);
pr_debug("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
- omap2_mbox_enable_irq(mbox, IRQ_RX);
-
return 0;
}
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index ef2a692..fb5bc6c 100644
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -22,11 +22,15 @@
*/
#include <linux/kernel.h>
+#include <linux/err.h>
#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
#include <plat/mmc.h>
#include "common.h"
+#include "control.h"
+#include "mux.h"
/*
* MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register
@@ -86,3 +90,72 @@
return 0;
}
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+static inline void omap242x_mmc_mux(struct omap_mmc_platform_data
+ *mmc_controller)
+{
+ if ((mmc_controller->slots[0].switch_pin > 0) && \
+ (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
+ omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
+ OMAP_PIN_INPUT_PULLUP);
+ if ((mmc_controller->slots[0].gpio_wp > 0) && \
+ (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
+ omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
+ OMAP_PIN_INPUT_PULLUP);
+
+ omap_mux_init_signal("sdmmc_cmd", 0);
+ omap_mux_init_signal("sdmmc_clki", 0);
+ omap_mux_init_signal("sdmmc_clko", 0);
+ omap_mux_init_signal("sdmmc_dat0", 0);
+ omap_mux_init_signal("sdmmc_dat_dir0", 0);
+ omap_mux_init_signal("sdmmc_cmd_dir", 0);
+ if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
+ omap_mux_init_signal("sdmmc_dat1", 0);
+ omap_mux_init_signal("sdmmc_dat2", 0);
+ omap_mux_init_signal("sdmmc_dat3", 0);
+ omap_mux_init_signal("sdmmc_dat_dir1", 0);
+ omap_mux_init_signal("sdmmc_dat_dir2", 0);
+ omap_mux_init_signal("sdmmc_dat_dir3", 0);
+ }
+
+ /*
+ * Use internal loop-back in MMC/SDIO Module Input Clock
+ * selection
+ */
+ if (mmc_controller->slots[0].internal_clock) {
+ u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+ v |= (1 << 24);
+ omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+ }
+}
+
+void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
+{
+ struct platform_device *pdev;
+ struct omap_hwmod *oh;
+ int id = 0;
+ char *oh_name = "msdi1";
+ char *dev_name = "mmci-omap";
+
+ if (!mmc_data[0]) {
+ pr_err("%s fails: Incomplete platform data\n", __func__);
+ return;
+ }
+
+ omap242x_mmc_mux(mmc_data[0]);
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("Could not look up %s\n", oh_name);
+ return;
+ }
+ pdev = omap_device_build(dev_name, id, oh, mmc_data[0],
+ sizeof(struct omap_mmc_platform_data), NULL, 0, 0);
+ if (IS_ERR(pdev))
+ WARN(1, "Can'd build omap_device for %s:%s.\n",
+ dev_name, oh->name);
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 80e55c5..9fe6829 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -41,6 +41,7 @@
#include "control.h"
#include "mux.h"
#include "prm.h"
+#include "common.h"
#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */
#define OMAP_MUX_BASE_SZ 0x5ca
@@ -217,8 +218,7 @@
return -ENODEV;
}
-static int __init
-omap_mux_get_by_name(const char *muxname,
+int __init omap_mux_get_by_name(const char *muxname,
struct omap_mux_partition **found_partition,
struct omap_mux **found_mux)
{
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 69fe060..471e62a7 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -59,6 +59,7 @@
#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
+#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
/* Flags for omapX_mux_init */
#define OMAP_PACKAGE_MASK 0xffff
@@ -225,8 +226,18 @@
*/
void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state);
+int omap_mux_get_by_name(const char *muxname,
+ struct omap_mux_partition **found_partition,
+ struct omap_mux **found_mux);
#else
+static inline int omap_mux_get_by_name(const char *muxname,
+ struct omap_mux_partition **found_partition,
+ struct omap_mux **found_mux)
+{
+ return 0;
+}
+
static inline int omap_mux_init_gpio(int gpio, int val)
{
return 0;
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index 503ac77..502e313 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -19,6 +19,27 @@
#include <linux/init.h>
__CPUINIT
+
+/* Physical address needed since MMU not enabled yet on secondary core */
+#define AUX_CORE_BOOT0_PA 0x48281800
+
+/*
+ * OMAP5 specific entry point for secondary CPU to jump from ROM
+ * code. This routine also provides a holding flag into which
+ * secondary core is held until we're ready for it to initialise.
+ * The primary core will update this flag using a hardware
++ * register AuxCoreBoot0.
+ */
+ENTRY(omap5_secondary_startup)
+wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0
+ ldr r0, [r2]
+ mov r0, r0, lsr #5
+ mrc p15, 0, r4, c0, c0, 5
+ and r4, r4, #0x0f
+ cmp r0, r4
+ bne wait
+ b secondary_startup
+END(omap5_secondary_startup)
/*
* OMAP4 specific entry point for secondary CPU to jump from ROM
* code. This routine also provides a holding flag into which
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index 56c345b..414083b 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -17,8 +17,10 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/smp.h>
+#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <mach/omap-wakeupgen.h>
#include "common.h"
@@ -35,7 +37,8 @@
*/
void __ref platform_cpu_die(unsigned int cpu)
{
- unsigned int this_cpu;
+ unsigned int boot_cpu = 0;
+ void __iomem *base = omap_get_wakeupgen_base();
flush_cache_all();
dsb();
@@ -43,16 +46,27 @@
/*
* we're ready for shutdown now, so do it
*/
- if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
- pr_err("Secure clear status failed\n");
+ if (omap_secure_apis_support()) {
+ if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
+ pr_err("Secure clear status failed\n");
+ } else {
+ __raw_writel(0, base + OMAP_AUX_CORE_BOOT_0);
+ }
+
for (;;) {
/*
* Enter into low power state
*/
omap4_hotplug_cpu(cpu, PWRDM_POWER_OFF);
- this_cpu = smp_processor_id();
- if (omap_read_auxcoreboot0() == this_cpu) {
+
+ if (omap_secure_apis_support())
+ boot_cpu = omap_read_auxcoreboot0();
+ else
+ boot_cpu =
+ __raw_readl(base + OMAP_AUX_CORE_BOOT_0) >> 5;
+
+ if (boot_cpu == smp_processor_id()) {
/*
* OK, proper wakeup, we're done
*/
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index ac49384..1be8bcb 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -73,19 +73,17 @@
.da_end = 0xFFFFF000,
},
},
-#if defined(CONFIG_MPU_TESLA_IOMMU)
{
.base = OMAP4_MMU2_BASE,
- .irq = INT_44XX_DSP_MMU,
+ .irq = OMAP44XX_IRQ_TESLA_MMU,
.pdata = {
.name = "tesla",
.nr_tlb_entries = 32,
- .clk_name = "tesla_ick",
+ .clk_name = "dsp_fck",
.da_start = 0x0,
.da_end = 0xFFFFF000,
},
},
-#endif
};
#define NR_OMAP4_IOMMU_DEVICES ARRAY_SIZE(omap4_devices)
static struct platform_device *omap4_iommu_pdev[NR_OMAP4_IOMMU_DEVICES];
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 13670aa..e35a86b 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -255,7 +255,7 @@
return -ENXIO;
}
- pwrdm_pre_transition();
+ pwrdm_pre_transition(NULL);
/*
* Check MPUSS next state and save interrupt controller if needed.
@@ -287,7 +287,7 @@
wakeup_cpu = smp_processor_id();
set_cpu_next_pwrst(wakeup_cpu, PWRDM_POWER_ON);
- pwrdm_post_transition();
+ pwrdm_post_transition(NULL);
return 0;
}
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index deffbf1..7d118b9 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -26,11 +26,19 @@
#include <mach/hardware.h>
#include <mach/omap-secure.h>
+#include <mach/omap-wakeupgen.h>
+#include <asm/cputype.h>
#include "iomap.h"
#include "common.h"
#include "clockdomain.h"
+#define CPU_MASK 0xff0ffff0
+#define CPU_CORTEX_A9 0x410FC090
+#define CPU_CORTEX_A15 0x410FC0F0
+
+#define OMAP5_CORE_COUNT 0x2
+
/* SCU base address */
static void __iomem *scu_base;
@@ -73,6 +81,8 @@
{
static struct clockdomain *cpu1_clkdm;
static bool booted;
+ void __iomem *base = omap_get_wakeupgen_base();
+
/*
* Set synchronisation state between this boot processor
* and the secondary one
@@ -85,7 +95,11 @@
* the AuxCoreBoot1 register is updated with cpu state
* A barrier is added to ensure that write buffer is drained
*/
- omap_modify_auxcoreboot0(0x200, 0xfffffdff);
+ if (omap_secure_apis_support())
+ omap_modify_auxcoreboot0(0x200, 0xfffffdff);
+ else
+ __raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0);
+
flush_cache_all();
smp_wmb();
@@ -124,13 +138,19 @@
static void __init wakeup_secondary(void)
{
+ void __iomem *base = omap_get_wakeupgen_base();
/*
* Write the address of secondary startup routine into the
* AuxCoreBoot1 where ROM code will jump and start executing
* on secondary core once out of WFE
* A barrier is added to ensure that write buffer is drained
*/
- omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup));
+ if (omap_secure_apis_support())
+ omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup));
+ else
+ __raw_writel(virt_to_phys(omap5_secondary_startup),
+ base + OMAP_AUX_CORE_BOOT_1);
+
smp_wmb();
/*
@@ -147,16 +167,21 @@
*/
void __init smp_init_cpus(void)
{
- unsigned int i, ncores;
+ unsigned int i = 0, ncores = 1, cpu_id;
- /*
- * Currently we can't call ioremap here because
- * SoC detection won't work until after init_early.
- */
- scu_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_SCU_BASE);
- BUG_ON(!scu_base);
-
- ncores = scu_get_core_count(scu_base);
+ /* Use ARM cpuid check here, as SoC detection will not work so early */
+ cpu_id = read_cpuid(CPUID_ID) & CPU_MASK;
+ if (cpu_id == CPU_CORTEX_A9) {
+ /*
+ * Currently we can't call ioremap here because
+ * SoC detection won't work until after init_early.
+ */
+ scu_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_SCU_BASE);
+ BUG_ON(!scu_base);
+ ncores = scu_get_core_count(scu_base);
+ } else if (cpu_id == CPU_CORTEX_A15) {
+ ncores = OMAP5_CORE_COUNT;
+ }
/* sanity check */
if (ncores > nr_cpu_ids) {
@@ -178,6 +203,7 @@
* Initialise the SCU and wake up the secondary core using
* wakeup_secondary().
*/
- scu_enable(scu_base);
+ if (scu_base)
+ scu_enable(scu_base);
wakeup_secondary();
}
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index d811c77..05fdebf 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -33,18 +33,23 @@
#include "omap4-sar-layout.h"
#include "common.h"
-#define NR_REG_BANKS 4
-#define MAX_IRQS 128
+#define MAX_NR_REG_BANKS 5
+#define MAX_IRQS 160
#define WKG_MASK_ALL 0x00000000
#define WKG_UNMASK_ALL 0xffffffff
#define CPU_ENA_OFFSET 0x400
#define CPU0_ID 0x0
#define CPU1_ID 0x1
+#define OMAP4_NR_BANKS 4
+#define OMAP4_NR_IRQS 128
static void __iomem *wakeupgen_base;
static void __iomem *sar_base;
static DEFINE_SPINLOCK(wakeupgen_lock);
static unsigned int irq_target_cpu[NR_IRQS];
+static unsigned int irq_banks = MAX_NR_REG_BANKS;
+static unsigned int max_irqs = MAX_IRQS;
+static unsigned int omap_secure_apis;
/*
* Static helper functions.
@@ -146,13 +151,13 @@
}
#ifdef CONFIG_HOTPLUG_CPU
-static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks);
+static DEFINE_PER_CPU(u32 [MAX_NR_REG_BANKS], irqmasks);
static void _wakeupgen_save_masks(unsigned int cpu)
{
u8 i;
- for (i = 0; i < NR_REG_BANKS; i++)
+ for (i = 0; i < irq_banks; i++)
per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu);
}
@@ -160,7 +165,7 @@
{
u8 i;
- for (i = 0; i < NR_REG_BANKS; i++)
+ for (i = 0; i < irq_banks; i++)
wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu);
}
@@ -168,7 +173,7 @@
{
u8 i;
- for (i = 0; i < NR_REG_BANKS; i++)
+ for (i = 0; i < irq_banks; i++)
wakeupgen_writel(reg, i, cpu);
}
@@ -196,25 +201,14 @@
#endif
#ifdef CONFIG_CPU_PM
-/*
- * Save WakeupGen interrupt context in SAR BANK3. Restore is done by
- * ROM code. WakeupGen IP is integrated along with GIC to manage the
- * interrupt wakeups from CPU low power states. It manages
- * masking/unmasking of Shared peripheral interrupts(SPI). So the
- * interrupt enable/disable control should be in sync and consistent
- * at WakeupGen and GIC so that interrupts are not lost.
- */
-static void irq_save_context(void)
+static inline void omap4_irq_save_context(void)
{
u32 i, val;
if (omap_rev() == OMAP4430_REV_ES1_0)
return;
- if (!sar_base)
- sar_base = omap4_get_sar_ram_base();
-
- for (i = 0; i < NR_REG_BANKS; i++) {
+ for (i = 0; i < irq_banks; i++) {
/* Save the CPUx interrupt mask for IRQ 0 to 127 */
val = wakeupgen_readl(i, 0);
sar_writel(val, WAKEUPGENENB_OFFSET_CPU0, i);
@@ -254,6 +248,53 @@
val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
val |= SAR_BACKUP_STATUS_WAKEUPGEN;
__raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
+
+}
+
+static inline void omap5_irq_save_context(void)
+{
+ u32 i, val;
+
+ for (i = 0; i < irq_banks; i++) {
+ /* Save the CPUx interrupt mask for IRQ 0 to 159 */
+ val = wakeupgen_readl(i, 0);
+ sar_writel(val, OMAP5_WAKEUPGENENB_OFFSET_CPU0, i);
+ val = wakeupgen_readl(i, 1);
+ sar_writel(val, OMAP5_WAKEUPGENENB_OFFSET_CPU1, i);
+ sar_writel(0x0, OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0, i);
+ sar_writel(0x0, OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1, i);
+ }
+
+ /* Save AuxBoot* registers */
+ val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+ __raw_writel(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET);
+ val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+ __raw_writel(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET);
+
+ /* Set the Backup Bit Mask status */
+ val = __raw_readl(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
+ val |= SAR_BACKUP_STATUS_WAKEUPGEN;
+ __raw_writel(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
+
+}
+
+/*
+ * Save WakeupGen interrupt context in SAR BANK3. Restore is done by
+ * ROM code. WakeupGen IP is integrated along with GIC to manage the
+ * interrupt wakeups from CPU low power states. It manages
+ * masking/unmasking of Shared peripheral interrupts(SPI). So the
+ * interrupt enable/disable control should be in sync and consistent
+ * at WakeupGen and GIC so that interrupts are not lost.
+ */
+static void irq_save_context(void)
+{
+ if (!sar_base)
+ sar_base = omap4_get_sar_ram_base();
+
+ if (soc_is_omap54xx())
+ omap5_irq_save_context();
+ else
+ omap4_irq_save_context();
}
/*
@@ -262,9 +303,14 @@
static void irq_sar_clear(void)
{
u32 val;
- val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
+ u32 offset = SAR_BACKUP_STATUS_OFFSET;
+
+ if (soc_is_omap54xx())
+ offset = OMAP5_SAR_BACKUP_STATUS_OFFSET;
+
+ val = __raw_readl(sar_base + offset);
val &= ~SAR_BACKUP_STATUS_WAKEUPGEN;
- __raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
+ __raw_writel(val, sar_base + offset);
}
/*
@@ -336,13 +382,25 @@
static void __init irq_pm_init(void)
{
- cpu_pm_register_notifier(&irq_notifier_block);
+ /* FIXME: Remove this when MPU OSWR support is added */
+ if (!soc_is_omap54xx())
+ cpu_pm_register_notifier(&irq_notifier_block);
}
#else
static void __init irq_pm_init(void)
{}
#endif
+void __iomem *omap_get_wakeupgen_base(void)
+{
+ return wakeupgen_base;
+}
+
+int omap_secure_apis_support(void)
+{
+ return omap_secure_apis;
+}
+
/*
* Initialise the wakeupgen module.
*/
@@ -358,12 +416,18 @@
}
/* Static mapping, never released */
- wakeupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K);
+ wakeupgen_base = ioremap(OMAP_WKUPGEN_BASE, SZ_4K);
if (WARN_ON(!wakeupgen_base))
return -ENOMEM;
+ if (cpu_is_omap44xx()) {
+ irq_banks = OMAP4_NR_BANKS;
+ max_irqs = OMAP4_NR_IRQS;
+ omap_secure_apis = 1;
+ }
+
/* Clear all IRQ bitmasks at wakeupGen level */
- for (i = 0; i < NR_REG_BANKS; i++) {
+ for (i = 0; i < irq_banks; i++) {
wakeupgen_writel(0, i, CPU0_ID);
wakeupgen_writel(0, i, CPU1_ID);
}
@@ -382,7 +446,7 @@
*/
/* Associate all the IRQs to boot CPU like GIC init does. */
- for (i = 0; i < NR_IRQS; i++)
+ for (i = 0; i < max_irqs; i++)
irq_target_cpu[i] = boot_cpu;
irq_hotplug_init();
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index a8161e5..c29dee9 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -21,6 +21,8 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
#include <plat/irqs.h>
#include <plat/sram.h>
@@ -210,6 +212,18 @@
}
early_initcall(omap4_sar_ram_init);
+static struct of_device_id irq_match[] __initdata = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, },
+ { }
+};
+
+void __init omap_gic_of_init(void)
+{
+ omap_wakeupgen_init();
+ of_irq_init(irq_match);
+}
+
#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
static int omap4_twl6030_hsmmc_late_init(struct device *dev)
{
diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h
index fe5b545..e170fe8 100644
--- a/arch/arm/mach-omap2/omap4-sar-layout.h
+++ b/arch/arm/mach-omap2/omap4-sar-layout.h
@@ -12,7 +12,7 @@
#define OMAP_ARCH_OMAP4_SAR_LAYOUT_H
/*
- * SAR BANK offsets from base address OMAP44XX_SAR_RAM_BASE
+ * SAR BANK offsets from base address OMAP44XX/54XX_SAR_RAM_BASE
*/
#define SAR_BANK1_OFFSET 0x0000
#define SAR_BANK2_OFFSET 0x1000
@@ -47,4 +47,14 @@
#define PTMSYNCREQ_EN_OFFSET (SAR_BANK3_OFFSET + 0x6d0)
#define SAR_BACKUP_STATUS_WAKEUPGEN 0x10
+/* WakeUpGen save restore offset from OMAP54XX_SAR_RAM_BASE */
+#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8d4)
+#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8e8)
+#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x8fc)
+#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x910)
+#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0x924)
+#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x928)
+#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0x92c)
+#define OMAP5_SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x800)
+
#endif
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index bf86f7e..6ca8e51 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -153,6 +153,7 @@
#include "prm44xx.h"
#include "prminst44xx.h"
#include "mux.h"
+#include "pm.h"
/* Maximum microseconds to wait for OMAP module to softreset */
#define MAX_MODULE_SOFTRESET_WAIT 10000
@@ -166,12 +167,40 @@
*/
#define LINKS_PER_OCP_IF 2
+/**
+ * struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations
+ * @enable_module: function to enable a module (via MODULEMODE)
+ * @disable_module: function to disable a module (via MODULEMODE)
+ *
+ * XXX Eventually this functionality will be hidden inside the PRM/CM
+ * device drivers. Until then, this should avoid huge blocks of cpu_is_*()
+ * conditionals in this code.
+ */
+struct omap_hwmod_soc_ops {
+ void (*enable_module)(struct omap_hwmod *oh);
+ int (*disable_module)(struct omap_hwmod *oh);
+ int (*wait_target_ready)(struct omap_hwmod *oh);
+ int (*assert_hardreset)(struct omap_hwmod *oh,
+ struct omap_hwmod_rst_info *ohri);
+ int (*deassert_hardreset)(struct omap_hwmod *oh,
+ struct omap_hwmod_rst_info *ohri);
+ int (*is_hardreset_asserted)(struct omap_hwmod *oh,
+ struct omap_hwmod_rst_info *ohri);
+ int (*init_clkdm)(struct omap_hwmod *oh);
+};
+
+/* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */
+static struct omap_hwmod_soc_ops soc_ops;
+
/* omap_hwmod_list contains all registered struct omap_hwmods */
static LIST_HEAD(omap_hwmod_list);
/* mpu_oh: used to add/remove MPU initiator from sleepdep list */
static struct omap_hwmod *mpu_oh;
+/* io_chain_lock: used to serialize reconfigurations of the I/O chain */
+static DEFINE_SPINLOCK(io_chain_lock);
+
/*
* linkspace: ptr to a buffer that struct omap_hwmod_link records are
* allocated from - used to reduce the number of small memory
@@ -186,6 +215,9 @@
*/
static unsigned short free_ls, max_ls, ls_supp;
+/* inited: set to true once the hwmod code is initialized */
+static bool inited;
+
/* Private functions */
/**
@@ -388,6 +420,49 @@
}
/**
+ * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v
+ * @oh: struct omap_hwmod *
+ *
+ * The DMADISABLE bit is a semi-automatic bit present in sysconfig register
+ * of some modules. When the DMA must perform read/write accesses, the
+ * DMADISABLE bit is cleared by the hardware. But when the DMA must stop
+ * for power management, software must set the DMADISABLE bit back to 1.
+ *
+ * Set the DMADISABLE bit in @v for hwmod @oh. Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int _set_dmadisable(struct omap_hwmod *oh)
+{
+ u32 v;
+ u32 dmadisable_mask;
+
+ if (!oh->class->sysc ||
+ !(oh->class->sysc->sysc_flags & SYSC_HAS_DMADISABLE))
+ return -EINVAL;
+
+ if (!oh->class->sysc->sysc_fields) {
+ WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
+ return -EINVAL;
+ }
+
+ /* clocks must be on for this operation */
+ if (oh->_state != _HWMOD_STATE_ENABLED) {
+ pr_warn("omap_hwmod: %s: dma can be disabled only from enabled state\n", oh->name);
+ return -EINVAL;
+ }
+
+ pr_debug("omap_hwmod: %s: setting DMADISABLE\n", oh->name);
+
+ v = oh->_sysc_cache;
+ dmadisable_mask =
+ (0x1 << oh->class->sysc->sysc_fields->dmadisable_shift);
+ v |= dmadisable_mask;
+ _write_sysconfig(v, oh);
+
+ return 0;
+}
+
+/**
* _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v
* @oh: struct omap_hwmod *
* @autoidle: desired AUTOIDLE bitfield value (0 or 1)
@@ -530,7 +605,7 @@
if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v);
if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
- _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
+ _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v);
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
@@ -771,23 +846,19 @@
}
/**
- * _enable_module - enable CLKCTRL modulemode on OMAP4
+ * _omap4_enable_module - enable CLKCTRL modulemode on OMAP4
* @oh: struct omap_hwmod *
*
* Enables the PRCM module mode related to the hwmod @oh.
* No return value.
*/
-static void _enable_module(struct omap_hwmod *oh)
+static void _omap4_enable_module(struct omap_hwmod *oh)
{
- /* The module mode does not exist prior OMAP4 */
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
- return;
-
if (!oh->clkdm || !oh->prcm.omap4.modulemode)
return;
- pr_debug("omap_hwmod: %s: _enable_module: %d\n",
- oh->name, oh->prcm.omap4.modulemode);
+ pr_debug("omap_hwmod: %s: %s: %d\n",
+ oh->name, __func__, oh->prcm.omap4.modulemode);
omap4_cminst_module_enable(oh->prcm.omap4.modulemode,
oh->clkdm->prcm_partition,
@@ -807,10 +878,7 @@
*/
static int _omap4_wait_target_disable(struct omap_hwmod *oh)
{
- if (!cpu_is_omap44xx())
- return 0;
-
- if (!oh)
+ if (!oh || !oh->clkdm)
return -EINVAL;
if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
@@ -1124,15 +1192,18 @@
* _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
* @oh: struct omap_hwmod *
*
- * If module is marked as SWSUP_SIDLE, force the module out of slave
- * idle; otherwise, configure it for smart-idle. If module is marked
- * as SWSUP_MSUSPEND, force the module out of master standby;
- * otherwise, configure it for smart-standby. No return value.
+ * Ensure that the OCP_SYSCONFIG register for the IP block represented
+ * by @oh is set to indicate to the PRCM that the IP block is active.
+ * Usually this means placing the module into smart-idle mode and
+ * smart-standby, but if there is a bug in the automatic idle handling
+ * for the IP block, it may need to be placed into the force-idle or
+ * no-idle variants of these modes. No return value.
*/
static void _enable_sysc(struct omap_hwmod *oh)
{
u8 idlemode, sf;
u32 v;
+ bool clkdm_act;
if (!oh->class->sysc)
return;
@@ -1141,8 +1212,16 @@
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE) {
- idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
- HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+ clkdm_act = ((oh->clkdm &&
+ oh->clkdm->flags & CLKDM_ACTIVE_WITH_MPU) ||
+ (oh->_clk && oh->_clk->clkdm &&
+ oh->_clk->clkdm->flags & CLKDM_ACTIVE_WITH_MPU));
+ if (clkdm_act && !(oh->class->sysc->idlemodes &
+ (SIDLE_SMART | SIDLE_SMART_WKUP)))
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ else
+ idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
+ HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
_set_slave_idlemode(oh, idlemode, &v);
}
@@ -1208,8 +1287,13 @@
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE) {
- idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
- HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
+ /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */
+ if (oh->flags & HWMOD_SWSUP_SIDLE ||
+ !(oh->class->sysc->idlemodes &
+ (SIDLE_SMART | SIDLE_SMART_WKUP)))
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ else
+ idlemode = HWMOD_IDLEMODE_SMART;
_set_slave_idlemode(oh, idlemode, &v);
}
@@ -1285,24 +1369,20 @@
return oh;
}
+
/**
* _init_clkdm - look up a clockdomain name, store pointer in omap_hwmod
* @oh: struct omap_hwmod *
*
* Convert a clockdomain name stored in a struct omap_hwmod into a
* clockdomain pointer, and save it into the struct omap_hwmod.
- * return -EINVAL if clkdm_name does not exist or if the lookup failed.
+ * Return -EINVAL if the clkdm_name lookup failed.
*/
static int _init_clkdm(struct omap_hwmod *oh)
{
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ if (!oh->clkdm_name)
return 0;
- if (!oh->clkdm_name) {
- pr_warning("omap_hwmod: %s: no clkdm_name\n", oh->name);
- return -EINVAL;
- }
-
oh->clkdm = clkdm_lookup(oh->clkdm_name);
if (!oh->clkdm) {
pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n",
@@ -1338,7 +1418,8 @@
ret |= _init_main_clk(oh);
ret |= _init_interface_clks(oh);
ret |= _init_opt_clks(oh);
- ret |= _init_clkdm(oh);
+ if (soc_ops.init_clkdm)
+ ret |= soc_ops.init_clkdm(oh);
if (!ret)
oh->_state = _HWMOD_STATE_CLKS_INITED;
@@ -1349,53 +1430,6 @@
}
/**
- * _wait_target_ready - wait for a module to leave slave idle
- * @oh: struct omap_hwmod *
- *
- * Wait for a module @oh to leave slave idle. Returns 0 if the module
- * does not have an IDLEST bit or if the module successfully leaves
- * slave idle; otherwise, pass along the return value of the
- * appropriate *_cm*_wait_module_ready() function.
- */
-static int _wait_target_ready(struct omap_hwmod *oh)
-{
- struct omap_hwmod_ocp_if *os;
- int ret;
-
- if (!oh)
- return -EINVAL;
-
- if (oh->flags & HWMOD_NO_IDLEST)
- return 0;
-
- os = _find_mpu_rt_port(oh);
- if (!os)
- return 0;
-
- /* XXX check module SIDLEMODE */
-
- /* XXX check clock enable states */
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
- oh->prcm.omap2.idlest_reg_id,
- oh->prcm.omap2.idlest_idle_bit);
- } else if (cpu_is_omap44xx()) {
- if (!oh->clkdm)
- return -EINVAL;
-
- ret = omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition,
- oh->clkdm->cm_inst,
- oh->clkdm->clkdm_offs,
- oh->prcm.omap4.clkctrl_offs);
- } else {
- BUG();
- };
-
- return ret;
-}
-
-/**
* _lookup_hardreset - fill register bit info for this hwmod/reset line
* @oh: struct omap_hwmod *
* @name: name of the reset line in the context of this hwmod
@@ -1431,32 +1465,31 @@
* @oh: struct omap_hwmod *
* @name: name of the reset line to lookup and assert
*
- * Some IP like dsp, ipu or iva contain processor that require
- * an HW reset line to be assert / deassert in order to enable fully
- * the IP.
+ * Some IP like dsp, ipu or iva contain processor that require an HW
+ * reset line to be assert / deassert in order to enable fully the IP.
+ * Returns -EINVAL if @oh is null, -ENOSYS if we have no way of
+ * asserting the hardreset line on the currently-booted SoC, or passes
+ * along the return value from _lookup_hardreset() or the SoC's
+ * assert_hardreset code.
*/
static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
{
struct omap_hwmod_rst_info ohri;
- u8 ret;
+ u8 ret = -EINVAL;
if (!oh)
return -EINVAL;
+ if (!soc_ops.assert_hardreset)
+ return -ENOSYS;
+
ret = _lookup_hardreset(oh, name, &ohri);
if (IS_ERR_VALUE(ret))
return ret;
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
- return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs,
- ohri.rst_shift);
- else if (cpu_is_omap44xx())
- return omap4_prminst_assert_hardreset(ohri.rst_shift,
- oh->clkdm->pwrdm.ptr->prcm_partition,
- oh->clkdm->pwrdm.ptr->prcm_offs,
- oh->prcm.omap4.rstctrl_offs);
- else
- return -EINVAL;
+ ret = soc_ops.assert_hardreset(oh, &ohri);
+
+ return ret;
}
/**
@@ -1465,38 +1498,29 @@
* @oh: struct omap_hwmod *
* @name: name of the reset line to look up and deassert
*
- * Some IP like dsp, ipu or iva contain processor that require
- * an HW reset line to be assert / deassert in order to enable fully
- * the IP.
+ * Some IP like dsp, ipu or iva contain processor that require an HW
+ * reset line to be assert / deassert in order to enable fully the IP.
+ * Returns -EINVAL if @oh is null, -ENOSYS if we have no way of
+ * deasserting the hardreset line on the currently-booted SoC, or passes
+ * along the return value from _lookup_hardreset() or the SoC's
+ * deassert_hardreset code.
*/
static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
{
struct omap_hwmod_rst_info ohri;
- int ret;
+ int ret = -EINVAL;
if (!oh)
return -EINVAL;
+ if (!soc_ops.deassert_hardreset)
+ return -ENOSYS;
+
ret = _lookup_hardreset(oh, name, &ohri);
if (IS_ERR_VALUE(ret))
return ret;
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- ret = omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs,
- ohri.rst_shift,
- ohri.st_shift);
- } else if (cpu_is_omap44xx()) {
- if (ohri.st_shift)
- pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
- oh->name, name);
- ret = omap4_prminst_deassert_hardreset(ohri.rst_shift,
- oh->clkdm->pwrdm.ptr->prcm_partition,
- oh->clkdm->pwrdm.ptr->prcm_offs,
- oh->prcm.omap4.rstctrl_offs);
- } else {
- return -EINVAL;
- }
-
+ ret = soc_ops.deassert_hardreset(oh, &ohri);
if (ret == -EBUSY)
pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
@@ -1509,31 +1533,28 @@
* @oh: struct omap_hwmod *
* @name: name of the reset line to look up and read
*
- * Return the state of the reset line.
+ * Return the state of the reset line. Returns -EINVAL if @oh is
+ * null, -ENOSYS if we have no way of reading the hardreset line
+ * status on the currently-booted SoC, or passes along the return
+ * value from _lookup_hardreset() or the SoC's is_hardreset_asserted
+ * code.
*/
static int _read_hardreset(struct omap_hwmod *oh, const char *name)
{
struct omap_hwmod_rst_info ohri;
- u8 ret;
+ u8 ret = -EINVAL;
if (!oh)
return -EINVAL;
+ if (!soc_ops.is_hardreset_asserted)
+ return -ENOSYS;
+
ret = _lookup_hardreset(oh, name, &ohri);
if (IS_ERR_VALUE(ret))
return ret;
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs,
- ohri.st_shift);
- } else if (cpu_is_omap44xx()) {
- return omap4_prminst_is_hardreset_asserted(ohri.rst_shift,
- oh->clkdm->pwrdm.ptr->prcm_partition,
- oh->clkdm->pwrdm.ptr->prcm_offs,
- oh->prcm.omap4.rstctrl_offs);
- } else {
- return -EINVAL;
- }
+ return soc_ops.is_hardreset_asserted(oh, &ohri);
}
/**
@@ -1571,10 +1592,6 @@
{
int v;
- /* The module mode does not exist prior OMAP4 */
- if (!cpu_is_omap44xx())
- return -EINVAL;
-
if (!oh->clkdm || !oh->prcm.omap4.modulemode)
return -EINVAL;
@@ -1698,11 +1715,17 @@
* therefore have no OCP header registers to access. Others (like the
* IVA) have idiosyncratic reset sequences. So for these relatively
* rare cases, custom reset code can be supplied in the struct
- * omap_hwmod_class .reset function pointer. Passes along the return
- * value from either _ocp_softreset() or the custom reset function -
- * these must return -EINVAL if the hwmod cannot be reset this way or
- * if the hwmod is in the wrong state, -ETIMEDOUT if the module did
- * not reset in time, or 0 upon success.
+ * omap_hwmod_class .reset function pointer.
+ *
+ * _set_dmadisable() is called to set the DMADISABLE bit so that it
+ * does not prevent idling of the system. This is necessary for cases
+ * where ROMCODE/BOOTLOADER uses dma and transfers control to the
+ * kernel without disabling dma.
+ *
+ * Passes along the return value from either _ocp_softreset() or the
+ * custom reset function - these must return -EINVAL if the hwmod
+ * cannot be reset this way or if the hwmod is in the wrong state,
+ * -ETIMEDOUT if the module did not reset in time, or 0 upon success.
*/
static int _reset(struct omap_hwmod *oh)
{
@@ -1724,6 +1747,8 @@
}
}
+ _set_dmadisable(oh);
+
/*
* OCP_SYSCONFIG bits need to be reprogrammed after a
* softreset. The _enable() function should be split to avoid
@@ -1738,6 +1763,32 @@
}
/**
+ * _reconfigure_io_chain - clear any I/O chain wakeups and reconfigure chain
+ *
+ * Call the appropriate PRM function to clear any logged I/O chain
+ * wakeups and to reconfigure the chain. This apparently needs to be
+ * done upon every mux change. Since hwmods can be concurrently
+ * enabled and idled, hold a spinlock around the I/O chain
+ * reconfiguration sequence. No return value.
+ *
+ * XXX When the PRM code is moved to drivers, this function can be removed,
+ * as the PRM infrastructure should abstract this.
+ */
+static void _reconfigure_io_chain(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&io_chain_lock, flags);
+
+ if (cpu_is_omap34xx() && omap3_has_io_chain_ctrl())
+ omap3xxx_prm_reconfigure_io_chain();
+ else if (cpu_is_omap44xx())
+ omap44xx_prm_reconfigure_io_chain();
+
+ spin_unlock_irqrestore(&io_chain_lock, flags);
+}
+
+/**
* _enable - enable an omap_hwmod
* @oh: struct omap_hwmod *
*
@@ -1793,8 +1844,10 @@
/* Mux pins for device runtime if populated */
if (oh->mux && (!oh->mux->enabled ||
((oh->_state == _HWMOD_STATE_IDLE) &&
- oh->mux->pads_dynamic)))
+ oh->mux->pads_dynamic))) {
omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
+ _reconfigure_io_chain();
+ }
_add_initiator_dep(oh, mpu_oh);
@@ -1814,9 +1867,11 @@
}
_enable_clocks(oh);
- _enable_module(oh);
+ if (soc_ops.enable_module)
+ soc_ops.enable_module(oh);
- r = _wait_target_ready(oh);
+ r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) :
+ -EINVAL;
if (!r) {
/*
* Set the clockdomain to HW_AUTO only if the target is ready,
@@ -1870,7 +1925,8 @@
_idle_sysc(oh);
_del_initiator_dep(oh, mpu_oh);
- _omap4_disable_module(oh);
+ if (soc_ops.disable_module)
+ soc_ops.disable_module(oh);
/*
* The module must be in idle mode before disabling any parents
@@ -1883,8 +1939,10 @@
clkdm_hwmod_disable(oh->clkdm, oh);
/* Mux pins for device idle if populated */
- if (oh->mux && oh->mux->pads_dynamic)
+ if (oh->mux && oh->mux->pads_dynamic) {
omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
+ _reconfigure_io_chain();
+ }
oh->_state = _HWMOD_STATE_IDLE;
@@ -1975,7 +2033,8 @@
if (oh->_state == _HWMOD_STATE_ENABLED) {
_del_initiator_dep(oh, mpu_oh);
/* XXX what about the other system initiators here? dma, dsp */
- _omap4_disable_module(oh);
+ if (soc_ops.disable_module)
+ soc_ops.disable_module(oh);
_disable_clocks(oh);
if (oh->clkdm)
clkdm_hwmod_disable(oh->clkdm, oh);
@@ -2431,6 +2490,194 @@
return 0;
}
+/* Static functions intended only for use in soc_ops field function pointers */
+
+/**
+ * _omap2_wait_target_ready - wait for a module to leave slave idle
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to leave slave idle. Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully leaves
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm*_wait_module_ready() function.
+ */
+static int _omap2_wait_target_ready(struct omap_hwmod *oh)
+{
+ if (!oh)
+ return -EINVAL;
+
+ if (oh->flags & HWMOD_NO_IDLEST)
+ return 0;
+
+ if (!_find_mpu_rt_port(oh))
+ return 0;
+
+ /* XXX check module SIDLEMODE, hardreset status, enabled clocks */
+
+ return omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
+ oh->prcm.omap2.idlest_reg_id,
+ oh->prcm.omap2.idlest_idle_bit);
+}
+
+/**
+ * _omap4_wait_target_ready - wait for a module to leave slave idle
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to leave slave idle. Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully leaves
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm*_wait_module_ready() function.
+ */
+static int _omap4_wait_target_ready(struct omap_hwmod *oh)
+{
+ if (!oh || !oh->clkdm)
+ return -EINVAL;
+
+ if (oh->flags & HWMOD_NO_IDLEST)
+ return 0;
+
+ if (!_find_mpu_rt_port(oh))
+ return 0;
+
+ /* XXX check module SIDLEMODE, hardreset status */
+
+ return omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition,
+ oh->clkdm->cm_inst,
+ oh->clkdm->clkdm_offs,
+ oh->prcm.omap4.clkctrl_offs);
+}
+
+/**
+ * _omap2_assert_hardreset - call OMAP2 PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to assert hardreset
+ * @ohri: hardreset line data
+ *
+ * Call omap2_prm_assert_hardreset() with parameters extracted from
+ * the hwmod @oh and the hardreset line data @ohri. Only intended for
+ * use as an soc_ops function pointer. Passes along the return value
+ * from omap2_prm_assert_hardreset(). XXX This function is scheduled
+ * for removal when the PRM code is moved into drivers/.
+ */
+static int _omap2_assert_hardreset(struct omap_hwmod *oh,
+ struct omap_hwmod_rst_info *ohri)
+{
+ return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs,
+ ohri->rst_shift);
+}
+
+/**
+ * _omap2_deassert_hardreset - call OMAP2 PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to deassert hardreset
+ * @ohri: hardreset line data
+ *
+ * Call omap2_prm_deassert_hardreset() with parameters extracted from
+ * the hwmod @oh and the hardreset line data @ohri. Only intended for
+ * use as an soc_ops function pointer. Passes along the return value
+ * from omap2_prm_deassert_hardreset(). XXX This function is
+ * scheduled for removal when the PRM code is moved into drivers/.
+ */
+static int _omap2_deassert_hardreset(struct omap_hwmod *oh,
+ struct omap_hwmod_rst_info *ohri)
+{
+ return omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs,
+ ohri->rst_shift,
+ ohri->st_shift);
+}
+
+/**
+ * _omap2_is_hardreset_asserted - call OMAP2 PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to test hardreset
+ * @ohri: hardreset line data
+ *
+ * Call omap2_prm_is_hardreset_asserted() with parameters extracted
+ * from the hwmod @oh and the hardreset line data @ohri. Only
+ * intended for use as an soc_ops function pointer. Passes along the
+ * return value from omap2_prm_is_hardreset_asserted(). XXX This
+ * function is scheduled for removal when the PRM code is moved into
+ * drivers/.
+ */
+static int _omap2_is_hardreset_asserted(struct omap_hwmod *oh,
+ struct omap_hwmod_rst_info *ohri)
+{
+ return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs,
+ ohri->st_shift);
+}
+
+/**
+ * _omap4_assert_hardreset - call OMAP4 PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to assert hardreset
+ * @ohri: hardreset line data
+ *
+ * Call omap4_prminst_assert_hardreset() with parameters extracted
+ * from the hwmod @oh and the hardreset line data @ohri. Only
+ * intended for use as an soc_ops function pointer. Passes along the
+ * return value from omap4_prminst_assert_hardreset(). XXX This
+ * function is scheduled for removal when the PRM code is moved into
+ * drivers/.
+ */
+static int _omap4_assert_hardreset(struct omap_hwmod *oh,
+ struct omap_hwmod_rst_info *ohri)
+{
+ if (!oh->clkdm)
+ return -EINVAL;
+
+ return omap4_prminst_assert_hardreset(ohri->rst_shift,
+ oh->clkdm->pwrdm.ptr->prcm_partition,
+ oh->clkdm->pwrdm.ptr->prcm_offs,
+ oh->prcm.omap4.rstctrl_offs);
+}
+
+/**
+ * _omap4_deassert_hardreset - call OMAP4 PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to deassert hardreset
+ * @ohri: hardreset line data
+ *
+ * Call omap4_prminst_deassert_hardreset() with parameters extracted
+ * from the hwmod @oh and the hardreset line data @ohri. Only
+ * intended for use as an soc_ops function pointer. Passes along the
+ * return value from omap4_prminst_deassert_hardreset(). XXX This
+ * function is scheduled for removal when the PRM code is moved into
+ * drivers/.
+ */
+static int _omap4_deassert_hardreset(struct omap_hwmod *oh,
+ struct omap_hwmod_rst_info *ohri)
+{
+ if (!oh->clkdm)
+ return -EINVAL;
+
+ if (ohri->st_shift)
+ pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
+ oh->name, ohri->name);
+ return omap4_prminst_deassert_hardreset(ohri->rst_shift,
+ oh->clkdm->pwrdm.ptr->prcm_partition,
+ oh->clkdm->pwrdm.ptr->prcm_offs,
+ oh->prcm.omap4.rstctrl_offs);
+}
+
+/**
+ * _omap4_is_hardreset_asserted - call OMAP4 PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to test hardreset
+ * @ohri: hardreset line data
+ *
+ * Call omap4_prminst_is_hardreset_asserted() with parameters
+ * extracted from the hwmod @oh and the hardreset line data @ohri.
+ * Only intended for use as an soc_ops function pointer. Passes along
+ * the return value from omap4_prminst_is_hardreset_asserted(). XXX
+ * This function is scheduled for removal when the PRM code is moved
+ * into drivers/.
+ */
+static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh,
+ struct omap_hwmod_rst_info *ohri)
+{
+ if (!oh->clkdm)
+ return -EINVAL;
+
+ return omap4_prminst_is_hardreset_asserted(ohri->rst_shift,
+ oh->clkdm->pwrdm.ptr->prcm_partition,
+ oh->clkdm->pwrdm.ptr->prcm_offs,
+ oh->prcm.omap4.rstctrl_offs);
+}
+
/* Public functions */
u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs)
@@ -2563,12 +2810,18 @@
*
* Intended to be called early in boot before the clock framework is
* initialized. If @ois is not null, will register all omap_hwmods
- * listed in @ois that are valid for this chip. Returns 0.
+ * listed in @ois that are valid for this chip. Returns -EINVAL if
+ * omap_hwmod_init() hasn't been called before calling this function,
+ * -ENOMEM if the link memory area can't be allocated, or 0 upon
+ * success.
*/
int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois)
{
int r, i;
+ if (!inited)
+ return -EINVAL;
+
if (!ois)
return 0;
@@ -3401,3 +3654,47 @@
return 0;
}
+
+/**
+ * omap_hwmod_init - initialize the hwmod code
+ *
+ * Sets up some function pointers needed by the hwmod code to operate on the
+ * currently-booted SoC. Intended to be called once during kernel init
+ * before any hwmods are registered. No return value.
+ */
+void __init omap_hwmod_init(void)
+{
+ if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+ soc_ops.wait_target_ready = _omap2_wait_target_ready;
+ soc_ops.assert_hardreset = _omap2_assert_hardreset;
+ soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
+ soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
+ } else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
+ soc_ops.enable_module = _omap4_enable_module;
+ soc_ops.disable_module = _omap4_disable_module;
+ soc_ops.wait_target_ready = _omap4_wait_target_ready;
+ soc_ops.assert_hardreset = _omap4_assert_hardreset;
+ soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
+ soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
+ soc_ops.init_clkdm = _init_clkdm;
+ } else {
+ WARN(1, "omap_hwmod: unknown SoC type\n");
+ }
+
+ inited = true;
+}
+
+/**
+ * omap_hwmod_get_main_clk - get pointer to main clock name
+ * @oh: struct omap_hwmod *
+ *
+ * Returns the main clock name assocated with @oh upon success,
+ * or NULL if @oh is NULL.
+ */
+const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh)
+{
+ if (!oh)
+ return NULL;
+
+ return oh->main_clk;
+}
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index a7640d1..50cfab6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -192,6 +192,11 @@
.name = "mcbsp",
};
+static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
+ { .role = "pad_fck", .clk = "mcbsp_clks" },
+ { .role = "prcm_fck", .clk = "func_96m_ck" },
+};
+
/* mcbsp1 */
static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = {
{ .name = "tx", .irq = 59 },
@@ -214,6 +219,8 @@
.idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
},
},
+ .opt_clks = mcbsp_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
};
/* mcbsp2 */
@@ -238,6 +245,8 @@
.idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
},
},
+ .opt_clks = mcbsp_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
};
static struct omap_hwmod_class_sysconfig omap2420_msdi_sysc = {
@@ -585,5 +594,6 @@
int __init omap2420_hwmod_init(void)
{
+ omap_hwmod_init();
return omap_hwmod_register_links(omap2420_hwmod_ocp_ifs);
}
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 4d72649..58b5bc1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -296,6 +296,11 @@
.rev = MCBSP_CONFIG_TYPE2,
};
+static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
+ { .role = "pad_fck", .clk = "mcbsp_clks" },
+ { .role = "prcm_fck", .clk = "func_96m_ck" },
+};
+
/* mcbsp1 */
static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = {
{ .name = "tx", .irq = 59 },
@@ -320,6 +325,8 @@
.idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
},
},
+ .opt_clks = mcbsp_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
};
/* mcbsp2 */
@@ -345,6 +352,8 @@
.idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
},
},
+ .opt_clks = mcbsp_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
};
/* mcbsp3 */
@@ -370,6 +379,8 @@
.idlest_idle_bit = OMAP2430_ST_MCBSP3_SHIFT,
},
},
+ .opt_clks = mcbsp_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
};
/* mcbsp4 */
@@ -401,6 +412,8 @@
.idlest_idle_bit = OMAP2430_ST_MCBSP4_SHIFT,
},
},
+ .opt_clks = mcbsp_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
};
/* mcbsp5 */
@@ -432,6 +445,8 @@
.idlest_idle_bit = OMAP2430_ST_MCBSP5_SHIFT,
},
},
+ .opt_clks = mcbsp_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
};
/* MMC/SD/SDIO common */
@@ -938,5 +953,6 @@
int __init omap2430_hwmod_init(void)
{
+ omap_hwmod_init();
return omap_hwmod_register_links(omap2430_hwmod_ocp_ifs);
}
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index 83eafd9..afad69c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -68,7 +68,6 @@
struct omap_hwmod_class omap2xxx_timer_hwmod_class = {
.name = "timer",
.sysc = &omap2xxx_timer_sysc,
- .rev = OMAP_TIMER_IP_VERSION_1,
};
/*
@@ -257,7 +256,6 @@
.idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
};
@@ -276,7 +274,6 @@
.idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
};
@@ -295,7 +292,6 @@
.idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
};
@@ -314,7 +310,6 @@
.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
};
@@ -333,7 +328,6 @@
.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
};
@@ -352,7 +346,6 @@
.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
};
@@ -371,7 +364,6 @@
.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index b26d3c9..c9e3820 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -14,6 +14,8 @@
*
* XXX these should be marked initdata for multi-OMAP kernels
*/
+#include <linux/power/smartreflex.h>
+
#include <plat/omap_hwmod.h>
#include <mach/irqs.h>
#include <plat/cpu.h>
@@ -29,8 +31,6 @@
#include <plat/dmtimer.h>
#include "omap_hwmod_common_data.h"
-
-#include "smartreflex.h"
#include "prm-regbits-34xx.h"
#include "cm-regbits-34xx.h"
#include "wd_timer.h"
@@ -129,7 +129,6 @@
static struct omap_hwmod_class omap3xxx_timer_1ms_hwmod_class = {
.name = "timer",
.sysc = &omap3xxx_timer_1ms_sysc,
- .rev = OMAP_TIMER_IP_VERSION_1,
};
static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = {
@@ -145,12 +144,11 @@
static struct omap_hwmod_class omap3xxx_timer_hwmod_class = {
.name = "timer",
.sysc = &omap3xxx_timer_sysc,
- .rev = OMAP_TIMER_IP_VERSION_1,
};
/* secure timers dev attribute */
static struct omap_timer_capability_dev_attr capability_secure_dev_attr = {
- .timer_capability = OMAP_TIMER_SECURE,
+ .timer_capability = OMAP_TIMER_ALWON | OMAP_TIMER_SECURE,
};
/* always-on timers dev attribute */
@@ -195,7 +193,6 @@
.idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &omap3xxx_timer_1ms_hwmod_class,
};
@@ -213,7 +210,6 @@
.idlest_idle_bit = OMAP3430_ST_GPT3_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
};
@@ -231,7 +227,6 @@
.idlest_idle_bit = OMAP3430_ST_GPT4_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
};
@@ -249,7 +244,6 @@
.idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
};
@@ -267,7 +261,6 @@
.idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
};
@@ -285,7 +278,6 @@
.idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
};
@@ -527,11 +519,27 @@
static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = {
{ .irq = INT_35XX_UART4_IRQ, },
+ { .irq = -1 }
};
static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = {
{ .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, },
{ .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, },
+ { .dma_req = -1 }
+};
+
+/*
+ * XXX AM35xx UART4 cannot complete its softreset without uart1_fck or
+ * uart2_fck being enabled. So we add uart1_fck as an optional clock,
+ * below, and set the HWMOD_CONTROL_OPT_CLKS_IN_RESET. This really
+ * should not be needed. The functional clock structure of the AM35xx
+ * UART4 is extremely unclear and opaque; it is unclear what the role
+ * of uart1/2_fck is for the UART4. Any clarification from either
+ * empirical testing or the AM3505/3517 hardware designers would be
+ * most welcome.
+ */
+static struct omap_hwmod_opt_clk am35xx_uart4_opt_clks[] = {
+ { .role = "softreset_uart1_fck", .clk = "uart1_fck" },
};
static struct omap_hwmod am35xx_uart4_hwmod = {
@@ -543,11 +551,14 @@
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_UART4_SHIFT,
+ .module_bit = AM35XX_EN_UART4_SHIFT,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_EN_UART4_SHIFT,
+ .idlest_idle_bit = AM35XX_ST_UART4_SHIFT,
},
},
+ .opt_clks = am35xx_uart4_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(am35xx_uart4_opt_clks),
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.class = &omap2_uart_class,
};
@@ -1074,6 +1085,17 @@
.rev = MCBSP_CONFIG_TYPE3,
};
+/* McBSP functional clock mapping */
+static struct omap_hwmod_opt_clk mcbsp15_opt_clks[] = {
+ { .role = "pad_fck", .clk = "mcbsp_clks" },
+ { .role = "prcm_fck", .clk = "core_96m_fck" },
+};
+
+static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = {
+ { .role = "pad_fck", .clk = "mcbsp_clks" },
+ { .role = "prcm_fck", .clk = "per_96m_fck" },
+};
+
/* mcbsp1 */
static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = {
{ .name = "common", .irq = 16 },
@@ -1097,6 +1119,8 @@
.idlest_idle_bit = OMAP3430_ST_MCBSP1_SHIFT,
},
},
+ .opt_clks = mcbsp15_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(mcbsp15_opt_clks),
};
/* mcbsp2 */
@@ -1126,6 +1150,8 @@
.idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
},
},
+ .opt_clks = mcbsp234_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks),
.dev_attr = &omap34xx_mcbsp2_dev_attr,
};
@@ -1156,6 +1182,8 @@
.idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
},
},
+ .opt_clks = mcbsp234_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks),
.dev_attr = &omap34xx_mcbsp3_dev_attr,
};
@@ -1188,6 +1216,8 @@
.idlest_idle_bit = OMAP3430_ST_MCBSP4_SHIFT,
},
},
+ .opt_clks = mcbsp234_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks),
};
/* mcbsp5 */
@@ -1219,6 +1249,8 @@
.idlest_idle_bit = OMAP3430_ST_MCBSP5_SHIFT,
},
},
+ .opt_clks = mcbsp15_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(mcbsp15_opt_clks),
};
/* 'mcbsp sidetone' class */
@@ -1325,7 +1357,7 @@
};
static struct omap_hwmod omap34xx_sr1_hwmod = {
- .name = "sr1",
+ .name = "smartreflex_mpu_iva",
.class = &omap34xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
.prcm = {
@@ -1343,7 +1375,7 @@
};
static struct omap_hwmod omap36xx_sr1_hwmod = {
- .name = "sr1",
+ .name = "smartreflex_mpu_iva",
.class = &omap36xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
.prcm = {
@@ -1370,7 +1402,7 @@
};
static struct omap_hwmod omap34xx_sr2_hwmod = {
- .name = "sr2",
+ .name = "smartreflex_core",
.class = &omap34xx_smartreflex_hwmod_class,
.main_clk = "sr2_fck",
.prcm = {
@@ -1388,7 +1420,7 @@
};
static struct omap_hwmod omap36xx_sr2_hwmod = {
- .name = "sr2",
+ .name = "smartreflex_core",
.class = &omap36xx_smartreflex_hwmod_class,
.main_clk = "sr2_fck",
.prcm = {
@@ -1638,25 +1670,20 @@
/* usb_otg_hs */
static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = {
-
{ .name = "mc", .irq = 71 },
{ .irq = -1 }
};
static struct omap_hwmod_class am35xx_usbotg_class = {
.name = "am35xx_usbotg",
- .sysc = NULL,
};
static struct omap_hwmod am35xx_usbhsotg_hwmod = {
.name = "am35x_otg_hs",
.mpu_irqs = am35xx_usbhsotg_mpu_irqs,
- .main_clk = NULL,
- .prcm = {
- .omap2 = {
- },
- },
+ .main_clk = "hsotgusb_fck",
.class = &am35xx_usbotg_class,
+ .flags = HWMOD_NO_IDLEST,
};
/* MMC/SD/SDIO common */
@@ -2097,9 +2124,10 @@
static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = {
.master = &am35xx_usbhsotg_hwmod,
.slave = &omap3xxx_l3_main_hwmod,
- .clk = "core_l3_ick",
+ .clk = "hsotgusb_ick",
.user = OCP_USER_MPU,
};
+
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
.master = &omap3xxx_l4_core_hwmod,
@@ -2243,6 +2271,7 @@
.pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
+ { }
};
static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = {
@@ -2393,7 +2422,7 @@
static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &am35xx_usbhsotg_hwmod,
- .clk = "l4_ick",
+ .clk = "hsotgusb_ick",
.addr = am35xx_usbhsotg_addrs,
.user = OCP_USER_MPU,
};
@@ -3138,6 +3167,107 @@
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* am35xx has Davinci MDIO & EMAC */
+static struct omap_hwmod_class am35xx_mdio_class = {
+ .name = "davinci_mdio",
+};
+
+static struct omap_hwmod am35xx_mdio_hwmod = {
+ .name = "davinci_mdio",
+ .class = &am35xx_mdio_class,
+ .flags = HWMOD_NO_IDLEST,
+};
+
+/*
+ * XXX Should be connected to an IPSS hwmod, not the L3 directly;
+ * but this will probably require some additional hwmod core support,
+ * so is left as a future to-do item.
+ */
+static struct omap_hwmod_ocp_if am35xx_mdio__l3 = {
+ .master = &am35xx_mdio_hwmod,
+ .slave = &omap3xxx_l3_main_hwmod,
+ .clk = "emac_fck",
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am35xx_mdio_addrs[] = {
+ {
+ .pa_start = AM35XX_IPSS_MDIO_BASE,
+ .pa_end = AM35XX_IPSS_MDIO_BASE + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+/* l4_core -> davinci mdio */
+/*
+ * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly;
+ * but this will probably require some additional hwmod core support,
+ * so is left as a future to-do item.
+ */
+static struct omap_hwmod_ocp_if am35xx_l4_core__mdio = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &am35xx_mdio_hwmod,
+ .clk = "emac_fck",
+ .addr = am35xx_mdio_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_irq_info am35xx_emac_mpu_irqs[] = {
+ { .name = "rxthresh", .irq = INT_35XX_EMAC_C0_RXTHRESH_IRQ },
+ { .name = "rx_pulse", .irq = INT_35XX_EMAC_C0_RX_PULSE_IRQ },
+ { .name = "tx_pulse", .irq = INT_35XX_EMAC_C0_TX_PULSE_IRQ },
+ { .name = "misc_pulse", .irq = INT_35XX_EMAC_C0_MISC_PULSE_IRQ },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod_class am35xx_emac_class = {
+ .name = "davinci_emac",
+};
+
+static struct omap_hwmod am35xx_emac_hwmod = {
+ .name = "davinci_emac",
+ .mpu_irqs = am35xx_emac_mpu_irqs,
+ .class = &am35xx_emac_class,
+ .flags = HWMOD_NO_IDLEST,
+};
+
+/* l3_core -> davinci emac interface */
+/*
+ * XXX Should be connected to an IPSS hwmod, not the L3 directly;
+ * but this will probably require some additional hwmod core support,
+ * so is left as a future to-do item.
+ */
+static struct omap_hwmod_ocp_if am35xx_emac__l3 = {
+ .master = &am35xx_emac_hwmod,
+ .slave = &omap3xxx_l3_main_hwmod,
+ .clk = "emac_ick",
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am35xx_emac_addrs[] = {
+ {
+ .pa_start = AM35XX_IPSS_EMAC_BASE,
+ .pa_end = AM35XX_IPSS_EMAC_BASE + 0x30000 - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+/* l4_core -> davinci emac */
+/*
+ * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly;
+ * but this will probably require some additional hwmod core support,
+ * so is left as a future to-do item.
+ */
+static struct omap_hwmod_ocp_if am35xx_l4_core__emac = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &am35xx_emac_hwmod,
+ .clk = "emac_ick",
+ .addr = am35xx_emac_addrs,
+ .user = OCP_USER_MPU,
+};
+
static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l3_main__l4_core,
&omap3xxx_l3_main__l4_per,
@@ -3266,6 +3396,10 @@
&omap3xxx_l4_core__usb_tll_hs,
&omap3xxx_l4_core__es3plus_mmc1,
&omap3xxx_l4_core__es3plus_mmc2,
+ &am35xx_mdio__l3,
+ &am35xx_l4_core__mdio,
+ &am35xx_emac__l3,
+ &am35xx_l4_core__emac,
NULL
};
@@ -3283,6 +3417,8 @@
struct omap_hwmod_ocp_if **h = NULL;
unsigned int rev;
+ omap_hwmod_init();
+
/* Register hwmod links common to all OMAP3 */
r = omap_hwmod_register_links(omap3xxx_hwmod_ocp_ifs);
if (r < 0)
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 950454a..242aee4 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -19,6 +19,7 @@
*/
#include <linux/io.h>
+#include <linux/power/smartreflex.h>
#include <plat/omap_hwmod.h>
#include <plat/cpu.h>
@@ -32,8 +33,6 @@
#include <plat/common.h>
#include "omap_hwmod_common_data.h"
-
-#include "smartreflex.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
#include "prm44xx.h"
@@ -393,8 +392,7 @@
.rev_offs = 0x0000,
.sysc_offs = 0x0004,
.sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO),
.sysc_fields = &omap_hwmod_sysc_type1,
};
@@ -854,6 +852,11 @@
.name = "dss_hdmi",
.class = &omap44xx_hdmi_hwmod_class,
.clkdm_name = "l3_dss_clkdm",
+ /*
+ * HDMI audio requires to use no-idle mode. Hence,
+ * set idle mode by software.
+ */
+ .flags = HWMOD_SWSUP_SIDLE,
.mpu_irqs = omap44xx_dss_hdmi_irqs,
.sdma_reqs = omap44xx_dss_hdmi_sdma_reqs,
.main_clk = "dss_48mhz_clk",
@@ -1924,7 +1927,7 @@
static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp1_hwmod = {
@@ -1959,7 +1962,7 @@
static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp2_hwmod = {
@@ -1994,7 +1997,7 @@
static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp3_hwmod = {
@@ -2029,7 +2032,7 @@
static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp4_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp4_hwmod = {
@@ -2540,14 +2543,12 @@
static struct omap_hwmod omap44xx_cm_core_aon_hwmod = {
.name = "cm_core_aon",
.class = &omap44xx_prcm_hwmod_class,
- .clkdm_name = "cm_clkdm",
};
/* cm_core */
static struct omap_hwmod omap44xx_cm_core_hwmod = {
.name = "cm_core",
.class = &omap44xx_prcm_hwmod_class,
- .clkdm_name = "cm_clkdm",
};
/* prm */
@@ -2564,7 +2565,6 @@
static struct omap_hwmod omap44xx_prm_hwmod = {
.name = "prm",
.class = &omap44xx_prcm_hwmod_class,
- .clkdm_name = "prm_clkdm",
.mpu_irqs = omap44xx_prm_irqs,
.rst_lines = omap44xx_prm_resets,
.rst_lines_cnt = ARRAY_SIZE(omap44xx_prm_resets),
@@ -2943,7 +2943,6 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_alwon_dev_attr,
};
/* timer3 */
@@ -2965,7 +2964,6 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_alwon_dev_attr,
};
/* timer4 */
@@ -2987,7 +2985,6 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_alwon_dev_attr,
};
/* timer5 */
@@ -3009,7 +3006,6 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_alwon_dev_attr,
};
/* timer6 */
@@ -3032,7 +3028,6 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_alwon_dev_attr,
};
/* timer7 */
@@ -3054,7 +3049,6 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_alwon_dev_attr,
};
/* timer8 */
@@ -3860,7 +3854,7 @@
};
/* usb_host_fs -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_usb_host_fs__l3_main_2 = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_usb_host_fs__l3_main_2 = {
.master = &omap44xx_usb_host_fs_hwmod,
.slave = &omap44xx_l3_main_2_hwmod,
.clk = "l3_div_ck",
@@ -3918,7 +3912,7 @@
};
/* aess -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_aess__l4_abe = {
.master = &omap44xx_aess_hwmod,
.slave = &omap44xx_l4_abe_hwmod,
.clk = "ocp_abe_iclk",
@@ -4009,7 +4003,7 @@
};
/* l4_abe -> aess */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_aess_hwmod,
.clk = "ocp_abe_iclk",
@@ -4027,7 +4021,7 @@
};
/* l4_abe -> aess (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_aess_hwmod,
.clk = "ocp_abe_iclk",
@@ -5853,7 +5847,7 @@
};
/* l4_cfg -> usb_host_fs */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_fs = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = {
.master = &omap44xx_l4_cfg_hwmod,
.slave = &omap44xx_usb_host_fs_hwmod,
.clk = "l4_div_ck",
@@ -6010,13 +6004,13 @@
&omap44xx_iva__l3_main_2,
&omap44xx_l3_main_1__l3_main_2,
&omap44xx_l4_cfg__l3_main_2,
- &omap44xx_usb_host_fs__l3_main_2,
+ /* &omap44xx_usb_host_fs__l3_main_2, */
&omap44xx_usb_host_hs__l3_main_2,
&omap44xx_usb_otg_hs__l3_main_2,
&omap44xx_l3_main_1__l3_main_3,
&omap44xx_l3_main_2__l3_main_3,
&omap44xx_l4_cfg__l3_main_3,
- &omap44xx_aess__l4_abe,
+ /* &omap44xx_aess__l4_abe, */
&omap44xx_dsp__l4_abe,
&omap44xx_l3_main_1__l4_abe,
&omap44xx_mpu__l4_abe,
@@ -6025,8 +6019,8 @@
&omap44xx_l4_cfg__l4_wkup,
&omap44xx_mpu__mpu_private,
&omap44xx_l4_cfg__ocp_wp_noc,
- &omap44xx_l4_abe__aess,
- &omap44xx_l4_abe__aess_dma,
+ /* &omap44xx_l4_abe__aess, */
+ /* &omap44xx_l4_abe__aess_dma, */
&omap44xx_l3_main_2__c2c,
&omap44xx_l4_wkup__counter_32k,
&omap44xx_l4_cfg__ctrl_module_core,
@@ -6132,7 +6126,7 @@
&omap44xx_l4_per__uart2,
&omap44xx_l4_per__uart3,
&omap44xx_l4_per__uart4,
- &omap44xx_l4_cfg__usb_host_fs,
+ /* &omap44xx_l4_cfg__usb_host_fs, */
&omap44xx_l4_cfg__usb_host_hs,
&omap44xx_l4_cfg__usb_otg_hs,
&omap44xx_l4_cfg__usb_tll_hs,
@@ -6144,6 +6138,7 @@
int __init omap44xx_hwmod_init(void)
{
+ omap_hwmod_init();
return omap_hwmod_register_links(omap44xx_hwmod_ocp_ifs);
}
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c
index 51e5418..9f1ccdc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
@@ -47,6 +47,16 @@
.midle_shift = SYSC_TYPE2_MIDLEMODE_SHIFT,
.sidle_shift = SYSC_TYPE2_SIDLEMODE_SHIFT,
.srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT,
+ .dmadisable_shift = SYSC_TYPE2_DMADISABLE_SHIFT,
+};
+
+/**
+ * struct omap_hwmod_sysc_type3 - TYPE3 sysconfig scheme.
+ * Used by some IPs on AM33xx
+ */
+struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3 = {
+ .midle_shift = SYSC_TYPE3_MIDLEMODE_SHIFT,
+ .sidle_shift = SYSC_TYPE3_SIDLEMODE_SHIFT,
};
struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = {
diff --git a/arch/arm/mach-omap2/omap_l3_noc.h b/arch/arm/mach-omap2/omap_l3_noc.h
index 90b5098..a6ce34d 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.h
+++ b/arch/arm/mach-omap2/omap_l3_noc.h
@@ -51,7 +51,9 @@
0x200, /* DMM2 */
0x300, /* ABE */
0x400, /* L4CFG */
- 0x600 /* CLK2 PWR DISC */
+ 0x600, /* CLK2 PWR DISC */
+ 0x0, /* Host CLK1 */
+ 0x900 /* L4 Wakeup */
};
static u32 l3_targ_inst_clk2[] = {
@@ -72,11 +74,16 @@
0xE00, /* missing in TRM corresponds to AES2*/
0xC00, /* L4 PER3 */
0xA00, /* L4 PER1*/
- 0xB00 /* L4 PER2*/
+ 0xB00, /* L4 PER2*/
+ 0x0, /* HOST CLK2 */
+ 0x1800, /* CAL */
+ 0x1700 /* LLI */
};
static u32 l3_targ_inst_clk3[] = {
- 0x0100 /* EMUSS */
+ 0x0100 /* EMUSS */,
+ 0x0300, /* DEBUGSS_CT_TBR */
+ 0x0 /* HOST CLK3 */
};
static struct l3_masters_data {
@@ -110,13 +117,15 @@
{ 0xC8, "USBHOSTFS"}
};
-static char *l3_targ_inst_name[L3_MODULES][18] = {
+static char *l3_targ_inst_name[L3_MODULES][21] = {
{
"DMM1",
"DMM2",
"ABE",
"L4CFG",
"CLK2 PWR DISC",
+ "HOST CLK1",
+ "L4 WAKEUP"
},
{
"CORTEX M3" ,
@@ -137,9 +146,14 @@
"L4 PER3",
"L4 PER1",
"L4 PER2",
+ "HOST CLK2",
+ "CAL",
+ "LLI"
},
{
"EMUSS",
+ "DEBUG SOURCE",
+ "HOST CLK3"
},
};
diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c
index a05a62f..acc2164 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.c
+++ b/arch/arm/mach-omap2/omap_l3_smx.c
@@ -155,10 +155,11 @@
u8 multi = error & L3_ERROR_LOG_MULTI;
u32 address = omap3_l3_decode_addr(error_addr);
- WARN(true, "%s seen by %s %s at address %x\n",
+ pr_err("%s seen by %s %s at address %x\n",
omap3_l3_code_string(code),
omap3_l3_initiator_string(initid),
multi ? "Multiple Errors" : "", address);
+ WARN_ON(1);
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index 4c90477..d52651a 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -239,21 +239,15 @@
devconf2 &= ~CONF2_OTGMODE;
switch (musb_mode) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
case MUSB_HOST: /* Force VBUS valid, ID = 0 */
devconf2 |= CONF2_FORCE_HOST;
break;
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
devconf2 |= CONF2_FORCE_DEVICE;
break;
-#endif
-#ifdef CONFIG_USB_MUSB_OTG
case MUSB_OTG: /* Don't override the VBUS/ID comparators */
devconf2 |= CONF2_NO_OVERRIDE;
break;
-#endif
default:
pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
}
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index de6d464..d8f6dbf 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -53,7 +53,7 @@
omap_table_init = 1;
/* Lets now register with OPP library */
- for (i = 0; i < opp_def_size; i++) {
+ for (i = 0; i < opp_def_size; i++, opp_def++) {
struct omap_hwmod *oh;
struct device *dev;
@@ -86,7 +86,6 @@
__func__, opp_def->freq,
opp_def->hwmod_name, i, r);
}
- opp_def++;
}
return 0;
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 7856489..686137d 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -15,12 +15,25 @@
#include "powerdomain.h"
+#ifdef CONFIG_CPU_IDLE
+extern int __init omap3_idle_init(void);
+extern int __init omap4_idle_init(void);
+#else
+static inline int omap3_idle_init(void)
+{
+ return 0;
+}
+
+static inline int omap4_idle_init(void)
+{
+ return 0;
+}
+#endif
+
extern void *omap3_secure_ram_storage;
extern void omap3_pm_off_mode_enable(int);
extern void omap_sram_idle(void);
extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
-extern int omap3_idle_init(void);
-extern int omap4_idle_init(void);
extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused);
extern int (*omap_pm_suspend)(void);
@@ -88,7 +101,7 @@
static inline void enable_omap3630_toggle_l2_on_restore(void) { }
#endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
-#ifdef CONFIG_OMAP_SMARTREFLEX
+#ifdef CONFIG_POWER_AVS_OMAP
extern int omap_devinit_smartreflex(void);
extern void omap_enable_smartreflex_on_init(void);
#else
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index a34023d..e4fc88c 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -70,34 +70,6 @@
static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
static struct powerdomain *core_pwrdm, *per_pwrdm;
-static struct powerdomain *cam_pwrdm;
-
-static void omap3_enable_io_chain(void)
-{
- int timeout = 0;
-
- omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKEN);
- /* Do a readback to assure write has been done */
- omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
-
- while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
- OMAP3430_ST_IO_CHAIN_MASK)) {
- timeout++;
- if (timeout > 1000) {
- pr_err("Wake up daisy chain activation failed.\n");
- return;
- }
- omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
- WKUP_MOD, PM_WKEN);
- }
-}
-
-static void omap3_disable_io_chain(void)
-{
- omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKEN);
-}
static void omap3_core_save_context(void)
{
@@ -299,24 +271,22 @@
/* Enable IO-PAD and IO-CHAIN wakeups */
per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
- if (omap3_has_io_wakeup() &&
- (per_next_state < PWRDM_POWER_ON ||
- core_next_state < PWRDM_POWER_ON)) {
- omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
- if (omap3_has_io_chain_ctrl())
- omap3_enable_io_chain();
- }
- pwrdm_pre_transition();
+ if (mpu_next_state < PWRDM_POWER_ON) {
+ pwrdm_pre_transition(mpu_pwrdm);
+ pwrdm_pre_transition(neon_pwrdm);
+ }
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
+ pwrdm_pre_transition(per_pwrdm);
per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
omap2_gpio_prepare_for_idle(per_going_off);
}
/* CORE */
if (core_next_state < PWRDM_POWER_ON) {
+ pwrdm_pre_transition(core_pwrdm);
if (core_next_state == PWRDM_POWER_OFF) {
omap3_core_save_context();
omap3_cm_save_context();
@@ -369,26 +339,20 @@
omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
OMAP3430_GR_MOD,
OMAP3_PRM_VOLTCTRL_OFFSET);
+ pwrdm_post_transition(core_pwrdm);
}
omap3_intc_resume_idle();
- pwrdm_post_transition();
-
/* PER */
- if (per_next_state < PWRDM_POWER_ON)
+ if (per_next_state < PWRDM_POWER_ON) {
omap2_gpio_resume_after_idle();
-
- /* Disable IO-PAD and IO-CHAIN wakeup */
- if (omap3_has_io_wakeup() &&
- (per_next_state < PWRDM_POWER_ON ||
- core_next_state < PWRDM_POWER_ON)) {
- omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
- PM_WKEN);
- if (omap3_has_io_chain_ctrl())
- omap3_disable_io_chain();
+ pwrdm_post_transition(per_pwrdm);
}
- clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
+ if (mpu_next_state < PWRDM_POWER_ON) {
+ pwrdm_post_transition(mpu_pwrdm);
+ pwrdm_post_transition(neon_pwrdm);
+ }
}
static void omap3_pm_idle(void)
@@ -581,10 +545,13 @@
OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
/* Don't attach IVA interrupts */
- omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
- omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
- omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
- omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+ if (omap3_has_iva()) {
+ omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+ omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+ omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+ omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD,
+ OMAP3430_PM_IVAGRPSEL);
+ }
/* Clear any pending 'reset' flags */
omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
@@ -598,7 +565,9 @@
/* Clear any pending PRCM interrupts */
omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- omap3_iva_idle();
+ if (omap3_has_iva())
+ omap3_iva_idle();
+
omap3_d2d_idle();
}
@@ -724,6 +693,7 @@
ret = request_irq(omap_prcm_event_to_irq("io"),
_prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
omap3_pm_init);
+ enable_irq(omap_prcm_event_to_irq("io"));
if (ret) {
pr_err("pm: Failed to request pm_io irq\n");
@@ -748,7 +718,6 @@
neon_pwrdm = pwrdm_lookup("neon_pwrdm");
per_pwrdm = pwrdm_lookup("per_pwrdm");
core_pwrdm = pwrdm_lookup("core_pwrdm");
- cam_pwrdm = pwrdm_lookup("cam_pwrdm");
neon_clkdm = clkdm_lookup("neon_clkdm");
mpu_clkdm = clkdm_lookup("mpu_clkdm");
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 9611490..69b36e1 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -526,7 +526,8 @@
*
* Return the powerdomain @pwrdm's current power state. Returns -EINVAL
* if the powerdomain pointer is null or returns the current power state
- * upon success.
+ * upon success. Note that if the power domain only supports the ON state
+ * then just return ON as the current state.
*/
int pwrdm_read_pwrst(struct powerdomain *pwrdm)
{
@@ -535,6 +536,9 @@
if (!pwrdm)
return -EINVAL;
+ if (pwrdm->pwrsts == PWRSTS_ON)
+ return PWRDM_POWER_ON;
+
if (arch_pwrdm && arch_pwrdm->pwrdm_read_pwrst)
ret = arch_pwrdm->pwrdm_read_pwrst(pwrdm);
@@ -981,15 +985,23 @@
return ret;
}
-int pwrdm_pre_transition(void)
+int pwrdm_pre_transition(struct powerdomain *pwrdm)
{
- pwrdm_for_each(_pwrdm_pre_transition_cb, NULL);
+ if (pwrdm)
+ _pwrdm_pre_transition_cb(pwrdm, NULL);
+ else
+ pwrdm_for_each(_pwrdm_pre_transition_cb, NULL);
+
return 0;
}
-int pwrdm_post_transition(void)
+int pwrdm_post_transition(struct powerdomain *pwrdm)
{
- pwrdm_for_each(_pwrdm_post_transition_cb, NULL);
+ if (pwrdm)
+ _pwrdm_post_transition_cb(pwrdm, NULL);
+ else
+ pwrdm_for_each(_pwrdm_post_transition_cb, NULL);
+
return 0;
}
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index 8f88d65..baee906 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -67,9 +67,9 @@
/*
* Maximum number of clockdomains that can be associated with a powerdomain.
- * CORE powerdomain on OMAP4 is the worst case
+ * PER powerdomain on AM33XX is the worst case
*/
-#define PWRDM_MAX_CLKDMS 9
+#define PWRDM_MAX_CLKDMS 11
/* XXX A completely arbitrary number. What is reasonable here? */
#define PWRDM_TRANSITION_BAILOUT 100000
@@ -92,6 +92,15 @@
* @pwrdm_clkdms: Clockdomains in this powerdomain
* @node: list_head linking all powerdomains
* @voltdm_node: list_head linking all powerdomains in a voltagedomain
+ * @pwrstctrl_offs: (AM33XX only) XXX_PWRSTCTRL reg offset from prcm_offs
+ * @pwrstst_offs: (AM33XX only) XXX_PWRSTST reg offset from prcm_offs
+ * @logicretstate_mask: (AM33XX only) mask for logic retention bitfield
+ * in @pwrstctrl_offs
+ * @mem_on_mask: (AM33XX only) mask for mem on bitfield in @pwrstctrl_offs
+ * @mem_ret_mask: (AM33XX only) mask for mem ret bitfield in @pwrstctrl_offs
+ * @mem_pwrst_mask: (AM33XX only) mask for mem state bitfield in @pwrstst_offs
+ * @mem_retst_mask: (AM33XX only) mask for mem retention state bitfield
+ * in @pwrstctrl_offs
* @state:
* @state_counter:
* @timer:
@@ -121,6 +130,14 @@
unsigned ret_logic_off_counter;
unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS];
+ const u8 pwrstctrl_offs;
+ const u8 pwrstst_offs;
+ const u32 logicretstate_mask;
+ const u32 mem_on_mask[PWRDM_MAX_MEM_BANKS];
+ const u32 mem_ret_mask[PWRDM_MAX_MEM_BANKS];
+ const u32 mem_pwrst_mask[PWRDM_MAX_MEM_BANKS];
+ const u32 mem_retst_mask[PWRDM_MAX_MEM_BANKS];
+
#ifdef CONFIG_PM_DEBUG
s64 timer;
s64 state_timer[PWRDM_MAX_PWRSTS];
@@ -213,8 +230,8 @@
int pwrdm_wait_transition(struct powerdomain *pwrdm);
int pwrdm_state_switch(struct powerdomain *pwrdm);
-int pwrdm_pre_transition(void);
-int pwrdm_post_transition(void);
+int pwrdm_pre_transition(struct powerdomain *pwrdm);
+int pwrdm_post_transition(struct powerdomain *pwrdm);
int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
@@ -222,10 +239,12 @@
extern void omap242x_powerdomains_init(void);
extern void omap243x_powerdomains_init(void);
extern void omap3xxx_powerdomains_init(void);
+extern void am33xx_powerdomains_init(void);
extern void omap44xx_powerdomains_init(void);
extern struct pwrdm_ops omap2_pwrdm_operations;
extern struct pwrdm_ops omap3_pwrdm_operations;
+extern struct pwrdm_ops am33xx_pwrdm_operations;
extern struct pwrdm_ops omap4_pwrdm_operations;
/* Common Internal functions used across OMAP rev's */
diff --git a/arch/arm/mach-omap2/powerdomain33xx.c b/arch/arm/mach-omap2/powerdomain33xx.c
new file mode 100644
index 0000000..67c5663
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomain33xx.c
@@ -0,0 +1,229 @@
+/*
+ * AM33XX Powerdomain control
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Derived from mach-omap2/powerdomain44xx.c written by Rajendra Nayak
+ * <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <plat/prcm.h>
+
+#include "powerdomain.h"
+#include "prm33xx.h"
+#include "prm-regbits-33xx.h"
+
+
+static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK,
+ (pwrst << OMAP_POWERSTATE_SHIFT),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= OMAP_POWERSTATE_MASK;
+ v >>= OMAP_POWERSTATE_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= OMAP_POWERSTATEST_MASK;
+ v >>= OMAP_POWERSTATEST_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
+ v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
+{
+ am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
+ (1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+ am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK,
+ AM33XX_LASTPOWERSTATEENTERED_MASK,
+ pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->logicretstate_mask;
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= AM33XX_LOGICSTATEST_MASK;
+ v >>= AM33XX_LOGICSTATEST_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+ u32 v, m;
+
+ m = pwrdm->logicretstate_mask;
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->mem_on_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->mem_ret_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = pwrdm->mem_pwrst_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = pwrdm->mem_retst_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+ u32 c = 0;
+
+ /*
+ * REVISIT: pwrdm_wait_transition() may be better implemented
+ * via a callback and a periodic timer check -- how long do we expect
+ * powerdomain transitions to take?
+ */
+
+ /* XXX Is this udelay() value meaningful? */
+ while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs)
+ & OMAP_INTRANSITION_MASK) &&
+ (c++ < PWRDM_TRANSITION_BAILOUT))
+ udelay(1);
+
+ if (c > PWRDM_TRANSITION_BAILOUT) {
+ pr_err("powerdomain: %s: waited too long to complete transition\n",
+ pwrdm->name);
+ return -EAGAIN;
+ }
+
+ pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+ return 0;
+}
+
+struct pwrdm_ops am33xx_pwrdm_operations = {
+ .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst,
+ .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst,
+ .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst,
+ .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst,
+ .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst,
+ .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst,
+ .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst,
+ .pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst,
+ .pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange,
+ .pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst,
+ .pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst,
+ .pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst,
+ .pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst,
+ .pwrdm_wait_transition = am33xx_pwrdm_wait_transition,
+};
diff --git a/arch/arm/mach-omap2/powerdomains33xx_data.c b/arch/arm/mach-omap2/powerdomains33xx_data.c
new file mode 100644
index 0000000..869adb8
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains33xx_data.c
@@ -0,0 +1,185 @@
+/*
+ * AM33XX Power domain data
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "powerdomain.h"
+#include "prcm-common.h"
+#include "prm-regbits-33xx.h"
+#include "prm33xx.h"
+
+static struct powerdomain gfx_33xx_pwrdm = {
+ .name = "gfx_pwrdm",
+ .voltdm = { .name = "core" },
+ .prcm_offs = AM33XX_PRM_GFX_MOD,
+ .pwrstctrl_offs = AM33XX_PM_GFX_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_GFX_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
+ .banks = 1,
+ .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK,
+ .mem_on_mask = {
+ [0] = AM33XX_GFX_MEM_ONSTATE_MASK, /* gfx_mem */
+ },
+ .mem_ret_mask = {
+ [0] = AM33XX_GFX_MEM_RETSTATE_MASK, /* gfx_mem */
+ },
+ .mem_pwrst_mask = {
+ [0] = AM33XX_GFX_MEM_STATEST_MASK, /* gfx_mem */
+ },
+ .mem_retst_mask = {
+ [0] = AM33XX_GFX_MEM_RETSTATE_MASK, /* gfx_mem */
+ },
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET, /* gfx_mem */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_ON, /* gfx_mem */
+ },
+};
+
+static struct powerdomain rtc_33xx_pwrdm = {
+ .name = "rtc_pwrdm",
+ .voltdm = { .name = "rtc" },
+ .prcm_offs = AM33XX_PRM_RTC_MOD,
+ .pwrstctrl_offs = AM33XX_PM_RTC_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_RTC_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_ON,
+ .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK,
+};
+
+static struct powerdomain wkup_33xx_pwrdm = {
+ .name = "wkup_pwrdm",
+ .voltdm = { .name = "core" },
+ .prcm_offs = AM33XX_PRM_WKUP_MOD,
+ .pwrstctrl_offs = AM33XX_PM_WKUP_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_WKUP_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_ON,
+ .logicretstate_mask = AM33XX_LOGICRETSTATE_3_3_MASK,
+};
+
+static struct powerdomain per_33xx_pwrdm = {
+ .name = "per_pwrdm",
+ .voltdm = { .name = "core" },
+ .prcm_offs = AM33XX_PRM_PER_MOD,
+ .pwrstctrl_offs = AM33XX_PM_PER_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_PER_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
+ .banks = 3,
+ .logicretstate_mask = AM33XX_LOGICRETSTATE_3_3_MASK,
+ .mem_on_mask = {
+ [0] = AM33XX_PRUSS_MEM_ONSTATE_MASK, /* pruss_mem */
+ [1] = AM33XX_PER_MEM_ONSTATE_MASK, /* per_mem */
+ [2] = AM33XX_RAM_MEM_ONSTATE_MASK, /* ram_mem */
+ },
+ .mem_ret_mask = {
+ [0] = AM33XX_PRUSS_MEM_RETSTATE_MASK, /* pruss_mem */
+ [1] = AM33XX_PER_MEM_RETSTATE_MASK, /* per_mem */
+ [2] = AM33XX_RAM_MEM_RETSTATE_MASK, /* ram_mem */
+ },
+ .mem_pwrst_mask = {
+ [0] = AM33XX_PRUSS_MEM_STATEST_MASK, /* pruss_mem */
+ [1] = AM33XX_PER_MEM_STATEST_MASK, /* per_mem */
+ [2] = AM33XX_RAM_MEM_STATEST_MASK, /* ram_mem */
+ },
+ .mem_retst_mask = {
+ [0] = AM33XX_PRUSS_MEM_RETSTATE_MASK, /* pruss_mem */
+ [1] = AM33XX_PER_MEM_RETSTATE_MASK, /* per_mem */
+ [2] = AM33XX_RAM_MEM_RETSTATE_MASK, /* ram_mem */
+ },
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET, /* pruss_mem */
+ [1] = PWRSTS_OFF_RET, /* per_mem */
+ [2] = PWRSTS_OFF_RET, /* ram_mem */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_ON, /* pruss_mem */
+ [1] = PWRSTS_ON, /* per_mem */
+ [2] = PWRSTS_ON, /* ram_mem */
+ },
+};
+
+static struct powerdomain mpu_33xx_pwrdm = {
+ .name = "mpu_pwrdm",
+ .voltdm = { .name = "mpu" },
+ .prcm_offs = AM33XX_PRM_MPU_MOD,
+ .pwrstctrl_offs = AM33XX_PM_MPU_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_MPU_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
+ .banks = 3,
+ .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK,
+ .mem_on_mask = {
+ [0] = AM33XX_MPU_L1_ONSTATE_MASK, /* mpu_l1 */
+ [1] = AM33XX_MPU_L2_ONSTATE_MASK, /* mpu_l2 */
+ [2] = AM33XX_MPU_RAM_ONSTATE_MASK, /* mpu_ram */
+ },
+ .mem_ret_mask = {
+ [0] = AM33XX_MPU_L1_RETSTATE_MASK, /* mpu_l1 */
+ [1] = AM33XX_MPU_L2_RETSTATE_MASK, /* mpu_l2 */
+ [2] = AM33XX_MPU_RAM_RETSTATE_MASK, /* mpu_ram */
+ },
+ .mem_pwrst_mask = {
+ [0] = AM33XX_MPU_L1_STATEST_MASK, /* mpu_l1 */
+ [1] = AM33XX_MPU_L2_STATEST_MASK, /* mpu_l2 */
+ [2] = AM33XX_MPU_RAM_STATEST_MASK, /* mpu_ram */
+ },
+ .mem_retst_mask = {
+ [0] = AM33XX_MPU_L1_RETSTATE_MASK, /* mpu_l1 */
+ [1] = AM33XX_MPU_L2_RETSTATE_MASK, /* mpu_l2 */
+ [2] = AM33XX_MPU_RAM_RETSTATE_MASK, /* mpu_ram */
+ },
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET, /* mpu_l1 */
+ [1] = PWRSTS_OFF_RET, /* mpu_l2 */
+ [2] = PWRSTS_OFF_RET, /* mpu_ram */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_ON, /* mpu_l1 */
+ [1] = PWRSTS_ON, /* mpu_l2 */
+ [2] = PWRSTS_ON, /* mpu_ram */
+ },
+};
+
+static struct powerdomain cefuse_33xx_pwrdm = {
+ .name = "cefuse_pwrdm",
+ .voltdm = { .name = "core" },
+ .prcm_offs = AM33XX_PRM_CEFUSE_MOD,
+ .pwrstctrl_offs = AM33XX_PM_CEFUSE_PWRSTCTRL_OFFSET,
+ .pwrstst_offs = AM33XX_PM_CEFUSE_PWRSTST_OFFSET,
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct powerdomain *powerdomains_am33xx[] __initdata = {
+ &gfx_33xx_pwrdm,
+ &rtc_33xx_pwrdm,
+ &wkup_33xx_pwrdm,
+ &per_33xx_pwrdm,
+ &mpu_33xx_pwrdm,
+ &cefuse_33xx_pwrdm,
+ NULL,
+};
+
+void __init am33xx_powerdomains_init(void)
+{
+ pwrdm_register_platform_funcs(&am33xx_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_am33xx);
+ pwrdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index fb0a0a6..bb883e4 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -71,6 +71,22 @@
.voltdm = { .name = "mpu_iva" },
};
+static struct powerdomain mpu_am35x_pwrdm = {
+ .name = "mpu_pwrdm",
+ .prcm_offs = MPU_MOD,
+ .pwrsts = PWRSTS_ON,
+ .pwrsts_logic_ret = PWRSTS_ON,
+ .flags = PWRDM_HAS_MPU_QUIRK,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_ON,
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_ON,
+ },
+ .voltdm = { .name = "mpu_iva" },
+};
+
/*
* The USBTLL Save-and-Restore mechanism is broken on
* 3430s up to ES3.0 and 3630ES1.0. Hence this feature
@@ -120,6 +136,23 @@
.voltdm = { .name = "core" },
};
+static struct powerdomain core_am35x_pwrdm = {
+ .name = "core_pwrdm",
+ .prcm_offs = CORE_MOD,
+ .pwrsts = PWRSTS_ON,
+ .pwrsts_logic_ret = PWRSTS_ON,
+ .banks = 2,
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_ON, /* MEM1RETSTATE */
+ [1] = PWRSTS_ON, /* MEM2RETSTATE */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_ON, /* MEM1ONSTATE */
+ [1] = PWRSTS_ON, /* MEM2ONSTATE */
+ },
+ .voltdm = { .name = "core" },
+};
+
static struct powerdomain dss_pwrdm = {
.name = "dss_pwrdm",
.prcm_offs = OMAP3430_DSS_MOD,
@@ -135,6 +168,21 @@
.voltdm = { .name = "core" },
};
+static struct powerdomain dss_am35x_pwrdm = {
+ .name = "dss_pwrdm",
+ .prcm_offs = OMAP3430_DSS_MOD,
+ .pwrsts = PWRSTS_ON,
+ .pwrsts_logic_ret = PWRSTS_ON,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_ON, /* MEMRETSTATE */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_ON, /* MEMONSTATE */
+ },
+ .voltdm = { .name = "core" },
+};
+
/*
* Although the 34XX TRM Rev K Table 4-371 notes that retention is a
* possible SGX powerstate, the SGX device itself does not support
@@ -156,6 +204,21 @@
.voltdm = { .name = "core" },
};
+static struct powerdomain sgx_am35x_pwrdm = {
+ .name = "sgx_pwrdm",
+ .prcm_offs = OMAP3430ES2_SGX_MOD,
+ .pwrsts = PWRSTS_ON,
+ .pwrsts_logic_ret = PWRSTS_ON,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_ON, /* MEMRETSTATE */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_ON, /* MEMONSTATE */
+ },
+ .voltdm = { .name = "core" },
+};
+
static struct powerdomain cam_pwrdm = {
.name = "cam_pwrdm",
.prcm_offs = OMAP3430_CAM_MOD,
@@ -186,6 +249,21 @@
.voltdm = { .name = "core" },
};
+static struct powerdomain per_am35x_pwrdm = {
+ .name = "per_pwrdm",
+ .prcm_offs = OMAP3430_PER_MOD,
+ .pwrsts = PWRSTS_ON,
+ .pwrsts_logic_ret = PWRSTS_ON,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_ON, /* MEMRETSTATE */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_ON, /* MEMONSTATE */
+ },
+ .voltdm = { .name = "core" },
+};
+
static struct powerdomain emu_pwrdm = {
.name = "emu_pwrdm",
.prcm_offs = OMAP3430_EMU_MOD,
@@ -200,6 +278,14 @@
.voltdm = { .name = "mpu_iva" },
};
+static struct powerdomain neon_am35x_pwrdm = {
+ .name = "neon_pwrdm",
+ .prcm_offs = OMAP3430_NEON_MOD,
+ .pwrsts = PWRSTS_ON,
+ .pwrsts_logic_ret = PWRSTS_ON,
+ .voltdm = { .name = "mpu_iva" },
+};
+
static struct powerdomain usbhost_pwrdm = {
.name = "usbhost_pwrdm",
.prcm_offs = OMAP3430ES2_USBHOST_MOD,
@@ -293,6 +379,22 @@
NULL
};
+static struct powerdomain *powerdomains_am35x[] __initdata = {
+ &wkup_omap2_pwrdm,
+ &mpu_am35x_pwrdm,
+ &neon_am35x_pwrdm,
+ &core_am35x_pwrdm,
+ &sgx_am35x_pwrdm,
+ &dss_am35x_pwrdm,
+ &per_am35x_pwrdm,
+ &emu_pwrdm,
+ &dpll1_pwrdm,
+ &dpll3_pwrdm,
+ &dpll4_pwrdm,
+ &dpll5_pwrdm,
+ NULL
+};
+
void __init omap3xxx_powerdomains_init(void)
{
unsigned int rev;
@@ -301,21 +403,34 @@
return;
pwrdm_register_platform_funcs(&omap3_pwrdm_operations);
- pwrdm_register_pwrdms(powerdomains_omap3430_common);
rev = omap_rev();
- if (rev == OMAP3430_REV_ES1_0)
- pwrdm_register_pwrdms(powerdomains_omap3430es1);
- else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 ||
- rev == OMAP3430_REV_ES3_0 || rev == OMAP3630_REV_ES1_0)
- pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0);
- else if (rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2 ||
- rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1 ||
- rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2)
- pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus);
- else
- WARN(1, "OMAP3 powerdomain init: unknown chip type\n");
+ if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) {
+ pwrdm_register_pwrdms(powerdomains_am35x);
+ } else {
+ pwrdm_register_pwrdms(powerdomains_omap3430_common);
+
+ switch (rev) {
+ case OMAP3430_REV_ES1_0:
+ pwrdm_register_pwrdms(powerdomains_omap3430es1);
+ break;
+ case OMAP3430_REV_ES2_0:
+ case OMAP3430_REV_ES2_1:
+ case OMAP3430_REV_ES3_0:
+ case OMAP3630_REV_ES1_0:
+ pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0);
+ break;
+ case OMAP3430_REV_ES3_1:
+ case OMAP3430_REV_ES3_1_2:
+ case OMAP3630_REV_ES1_1:
+ case OMAP3630_REV_ES1_2:
+ pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus);
+ break;
+ default:
+ WARN(1, "OMAP3 powerdomain init: unknown chip type\n");
+ }
+ }
pwrdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 6da3ba4..e5f0503 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -203,8 +203,8 @@
#define OMAP3430_EN_MMC2_SHIFT 25
#define OMAP3430_EN_MMC1_MASK (1 << 24)
#define OMAP3430_EN_MMC1_SHIFT 24
-#define OMAP3430_EN_UART4_MASK (1 << 23)
-#define OMAP3430_EN_UART4_SHIFT 23
+#define AM35XX_EN_UART4_MASK (1 << 23)
+#define AM35XX_EN_UART4_SHIFT 23
#define OMAP3430_EN_MCSPI4_MASK (1 << 21)
#define OMAP3430_EN_MCSPI4_SHIFT 21
#define OMAP3430_EN_MCSPI3_MASK (1 << 20)
@@ -410,13 +410,21 @@
*/
#define MAX_MODULE_HARDRESET_WAIT 10000
+/*
+ * Maximum time(us) it takes to output the signal WUCLKOUT of the last
+ * pad of the I/O ring after asserting WUCLKIN high. Tero measured
+ * the actual time at 7 to 8 microseconds on OMAP3 and 2 to 4
+ * microseconds on OMAP4, so this timeout may be too high.
+ */
+#define MAX_IOPAD_LATCH_TIME 100
+
# ifndef __ASSEMBLER__
extern void __iomem *prm_base;
extern void __iomem *cm_base;
extern void __iomem *cm2_base;
extern void __iomem *prcm_mpu_base;
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_OMAP5)
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
extern void omap_prm_base_init(void);
extern void omap_cm_base_init(void);
#else
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 480f40a..053e24e 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -35,6 +35,7 @@
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
#include "prminst44xx.h"
+#include "cminst44xx.h"
#include "prm-regbits-24xx.h"
#include "prm-regbits-44xx.h"
#include "control.h"
@@ -159,8 +160,30 @@
if (omap2_globals->prcm_mpu)
prcm_mpu_base = omap2_globals->prcm_mpu;
- if (cpu_is_omap44xx()) {
+ if (cpu_is_omap44xx() || soc_is_omap54xx()) {
omap_prm_base_init();
omap_cm_base_init();
}
}
+
+/*
+ * Stubbed functions so that common files continue to build when
+ * custom builds are used
+ * XXX These are temporary and should be removed at the earliest possible
+ * opportunity
+ */
+int __weak omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+ return 0;
+}
+
+void __weak omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
+ s16 cdoffs, u16 clkctrl_offs)
+{
+}
+
+void __weak omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+}
diff --git a/arch/arm/mach-omap2/prm-regbits-33xx.h b/arch/arm/mach-omap2/prm-regbits-33xx.h
new file mode 100644
index 0000000..0221b5c
--- /dev/null
+++ b/arch/arm/mach-omap2/prm-regbits-33xx.h
@@ -0,0 +1,357 @@
+/*
+ * AM33XX PRM_XXX register bits
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_33XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_33XX_H
+
+#include "prm.h"
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ABBOFF_ACT_EXPORT_SHIFT 1
+#define AM33XX_ABBOFF_ACT_EXPORT_MASK (1 << 1)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ABBOFF_SLEEP_EXPORT_SHIFT 2
+#define AM33XX_ABBOFF_SLEEP_EXPORT_MASK (1 << 2)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_AIPOFF_SHIFT 8
+#define AM33XX_AIPOFF_MASK (1 << 8)
+
+/* Used by PM_WKUP_PWRSTST */
+#define AM33XX_DEBUGSS_MEM_STATEST_SHIFT 17
+#define AM33XX_DEBUGSS_MEM_STATEST_MASK (0x3 << 17)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_DISABLE_RTA_EXPORT_SHIFT 0
+#define AM33XX_DISABLE_RTA_EXPORT_MASK (1 << 0)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_CORE_RECAL_EN_SHIFT 12
+#define AM33XX_DPLL_CORE_RECAL_EN_MASK (1 << 12)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_CORE_RECAL_ST_SHIFT 12
+#define AM33XX_DPLL_CORE_RECAL_ST_MASK (1 << 12)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_DDR_RECAL_EN_SHIFT 14
+#define AM33XX_DPLL_DDR_RECAL_EN_MASK (1 << 14)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_DDR_RECAL_ST_SHIFT 14
+#define AM33XX_DPLL_DDR_RECAL_ST_MASK (1 << 14)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_DISP_RECAL_EN_SHIFT 15
+#define AM33XX_DPLL_DISP_RECAL_EN_MASK (1 << 15)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_DISP_RECAL_ST_SHIFT 13
+#define AM33XX_DPLL_DISP_RECAL_ST_MASK (1 << 13)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_MPU_RECAL_EN_SHIFT 11
+#define AM33XX_DPLL_MPU_RECAL_EN_MASK (1 << 11)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_MPU_RECAL_ST_SHIFT 11
+#define AM33XX_DPLL_MPU_RECAL_ST_MASK (1 << 11)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_DPLL_PER_RECAL_EN_SHIFT 13
+#define AM33XX_DPLL_PER_RECAL_EN_MASK (1 << 13)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_DPLL_PER_RECAL_ST_SHIFT 15
+#define AM33XX_DPLL_PER_RECAL_ST_MASK (1 << 15)
+
+/* Used by RM_WKUP_RSTST */
+#define AM33XX_EMULATION_M3_RST_SHIFT 6
+#define AM33XX_EMULATION_M3_RST_MASK (1 << 6)
+
+/* Used by RM_MPU_RSTST */
+#define AM33XX_EMULATION_MPU_RST_SHIFT 5
+#define AM33XX_EMULATION_MPU_RST_MASK (1 << 5)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ENFUNC1_EXPORT_SHIFT 3
+#define AM33XX_ENFUNC1_EXPORT_MASK (1 << 3)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ENFUNC3_EXPORT_SHIFT 5
+#define AM33XX_ENFUNC3_EXPORT_MASK (1 << 5)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ENFUNC4_SHIFT 6
+#define AM33XX_ENFUNC4_MASK (1 << 6)
+
+/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
+#define AM33XX_ENFUNC5_SHIFT 7
+#define AM33XX_ENFUNC5_MASK (1 << 7)
+
+/* Used by PRM_RSTST */
+#define AM33XX_EXTERNAL_WARM_RST_SHIFT 5
+#define AM33XX_EXTERNAL_WARM_RST_MASK (1 << 5)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_FORCEWKUP_EN_SHIFT 10
+#define AM33XX_FORCEWKUP_EN_MASK (1 << 10)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_FORCEWKUP_ST_SHIFT 10
+#define AM33XX_FORCEWKUP_ST_MASK (1 << 10)
+
+/* Used by PM_GFX_PWRSTCTRL */
+#define AM33XX_GFX_MEM_ONSTATE_SHIFT 17
+#define AM33XX_GFX_MEM_ONSTATE_MASK (0x3 << 17)
+
+/* Used by PM_GFX_PWRSTCTRL */
+#define AM33XX_GFX_MEM_RETSTATE_SHIFT 6
+#define AM33XX_GFX_MEM_RETSTATE_MASK (1 << 6)
+
+/* Used by PM_GFX_PWRSTST */
+#define AM33XX_GFX_MEM_STATEST_SHIFT 4
+#define AM33XX_GFX_MEM_STATEST_MASK (0x3 << 4)
+
+/* Used by RM_GFX_RSTCTRL, RM_GFX_RSTST */
+#define AM33XX_GFX_RST_SHIFT 0
+#define AM33XX_GFX_RST_MASK (1 << 0)
+
+/* Used by PRM_RSTST */
+#define AM33XX_GLOBAL_COLD_RST_SHIFT 0
+#define AM33XX_GLOBAL_COLD_RST_MASK (1 << 0)
+
+/* Used by PRM_RSTST */
+#define AM33XX_GLOBAL_WARM_SW_RST_SHIFT 1
+#define AM33XX_GLOBAL_WARM_SW_RST_MASK (1 << 1)
+
+/* Used by RM_WKUP_RSTST */
+#define AM33XX_ICECRUSHER_M3_RST_SHIFT 7
+#define AM33XX_ICECRUSHER_M3_RST_MASK (1 << 7)
+
+/* Used by RM_MPU_RSTST */
+#define AM33XX_ICECRUSHER_MPU_RST_SHIFT 6
+#define AM33XX_ICECRUSHER_MPU_RST_MASK (1 << 6)
+
+/* Used by PRM_RSTST */
+#define AM33XX_ICEPICK_RST_SHIFT 9
+#define AM33XX_ICEPICK_RST_MASK (1 << 9)
+
+/* Used by RM_PER_RSTCTRL */
+#define AM33XX_PRUSS_LRST_SHIFT 1
+#define AM33XX_PRUSS_LRST_MASK (1 << 1)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_PRUSS_MEM_ONSTATE_SHIFT 5
+#define AM33XX_PRUSS_MEM_ONSTATE_MASK (0x3 << 5)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_PRUSS_MEM_RETSTATE_SHIFT 7
+#define AM33XX_PRUSS_MEM_RETSTATE_MASK (1 << 7)
+
+/* Used by PM_PER_PWRSTST */
+#define AM33XX_PRUSS_MEM_STATEST_SHIFT 23
+#define AM33XX_PRUSS_MEM_STATEST_MASK (0x3 << 23)
+
+/*
+ * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST,
+ * PM_WKUP_PWRSTST, PM_RTC_PWRSTST
+ */
+#define AM33XX_INTRANSITION_SHIFT 20
+#define AM33XX_INTRANSITION_MASK (1 << 20)
+
+/* Used by PM_CEFUSE_PWRSTST */
+#define AM33XX_LASTPOWERSTATEENTERED_SHIFT 24
+#define AM33XX_LASTPOWERSTATEENTERED_MASK (0x3 << 24)
+
+/* Used by PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_RTC_PWRSTCTRL */
+#define AM33XX_LOGICRETSTATE_SHIFT 2
+#define AM33XX_LOGICRETSTATE_MASK (1 << 2)
+
+/* Renamed from LOGICRETSTATE Used by PM_PER_PWRSTCTRL, PM_WKUP_PWRSTCTRL */
+#define AM33XX_LOGICRETSTATE_3_3_SHIFT 3
+#define AM33XX_LOGICRETSTATE_3_3_MASK (1 << 3)
+
+/*
+ * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST,
+ * PM_WKUP_PWRSTST, PM_RTC_PWRSTST
+ */
+#define AM33XX_LOGICSTATEST_SHIFT 2
+#define AM33XX_LOGICSTATEST_MASK (1 << 2)
+
+/*
+ * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL,
+ * PM_MPU_PWRSTCTRL, PM_WKUP_PWRSTCTRL, PM_RTC_PWRSTCTRL
+ */
+#define AM33XX_LOWPOWERSTATECHANGE_SHIFT 4
+#define AM33XX_LOWPOWERSTATECHANGE_MASK (1 << 4)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_L1_ONSTATE_SHIFT 18
+#define AM33XX_MPU_L1_ONSTATE_MASK (0x3 << 18)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_L1_RETSTATE_SHIFT 22
+#define AM33XX_MPU_L1_RETSTATE_MASK (1 << 22)
+
+/* Used by PM_MPU_PWRSTST */
+#define AM33XX_MPU_L1_STATEST_SHIFT 6
+#define AM33XX_MPU_L1_STATEST_MASK (0x3 << 6)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_L2_ONSTATE_SHIFT 20
+#define AM33XX_MPU_L2_ONSTATE_MASK (0x3 << 20)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_L2_RETSTATE_SHIFT 23
+#define AM33XX_MPU_L2_RETSTATE_MASK (1 << 23)
+
+/* Used by PM_MPU_PWRSTST */
+#define AM33XX_MPU_L2_STATEST_SHIFT 8
+#define AM33XX_MPU_L2_STATEST_MASK (0x3 << 8)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_RAM_ONSTATE_SHIFT 16
+#define AM33XX_MPU_RAM_ONSTATE_MASK (0x3 << 16)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define AM33XX_MPU_RAM_RETSTATE_SHIFT 24
+#define AM33XX_MPU_RAM_RETSTATE_MASK (1 << 24)
+
+/* Used by PM_MPU_PWRSTST */
+#define AM33XX_MPU_RAM_STATEST_SHIFT 4
+#define AM33XX_MPU_RAM_STATEST_MASK (0x3 << 4)
+
+/* Used by PRM_RSTST */
+#define AM33XX_MPU_SECURITY_VIOL_RST_SHIFT 2
+#define AM33XX_MPU_SECURITY_VIOL_RST_MASK (1 << 2)
+
+/* Used by PRM_SRAM_COUNT */
+#define AM33XX_PCHARGECNT_VALUE_SHIFT 0
+#define AM33XX_PCHARGECNT_VALUE_MASK (0x3f << 0)
+
+/* Used by RM_PER_RSTCTRL */
+#define AM33XX_PCI_LRST_SHIFT 0
+#define AM33XX_PCI_LRST_MASK (1 << 0)
+
+/* Renamed from PCI_LRST Used by RM_PER_RSTST */
+#define AM33XX_PCI_LRST_5_5_SHIFT 5
+#define AM33XX_PCI_LRST_5_5_MASK (1 << 5)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_PER_MEM_ONSTATE_SHIFT 25
+#define AM33XX_PER_MEM_ONSTATE_MASK (0x3 << 25)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_PER_MEM_RETSTATE_SHIFT 29
+#define AM33XX_PER_MEM_RETSTATE_MASK (1 << 29)
+
+/* Used by PM_PER_PWRSTST */
+#define AM33XX_PER_MEM_STATEST_SHIFT 17
+#define AM33XX_PER_MEM_STATEST_MASK (0x3 << 17)
+
+/*
+ * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL,
+ * PM_MPU_PWRSTCTRL
+ */
+#define AM33XX_POWERSTATE_SHIFT 0
+#define AM33XX_POWERSTATE_MASK (0x3 << 0)
+
+/* Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST */
+#define AM33XX_POWERSTATEST_SHIFT 0
+#define AM33XX_POWERSTATEST_MASK (0x3 << 0)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_RAM_MEM_ONSTATE_SHIFT 30
+#define AM33XX_RAM_MEM_ONSTATE_MASK (0x3 << 30)
+
+/* Used by PM_PER_PWRSTCTRL */
+#define AM33XX_RAM_MEM_RETSTATE_SHIFT 27
+#define AM33XX_RAM_MEM_RETSTATE_MASK (1 << 27)
+
+/* Used by PM_PER_PWRSTST */
+#define AM33XX_RAM_MEM_STATEST_SHIFT 21
+#define AM33XX_RAM_MEM_STATEST_MASK (0x3 << 21)
+
+/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
+#define AM33XX_RETMODE_ENABLE_SHIFT 0
+#define AM33XX_RETMODE_ENABLE_MASK (1 << 0)
+
+/* Used by REVISION_PRM */
+#define AM33XX_REV_SHIFT 0
+#define AM33XX_REV_MASK (0xff << 0)
+
+/* Used by PRM_RSTTIME */
+#define AM33XX_RSTTIME1_SHIFT 0
+#define AM33XX_RSTTIME1_MASK (0xff << 0)
+
+/* Used by PRM_RSTTIME */
+#define AM33XX_RSTTIME2_SHIFT 8
+#define AM33XX_RSTTIME2_MASK (0x1f << 8)
+
+/* Used by PRM_RSTCTRL */
+#define AM33XX_RST_GLOBAL_COLD_SW_SHIFT 1
+#define AM33XX_RST_GLOBAL_COLD_SW_MASK (1 << 1)
+
+/* Used by PRM_RSTCTRL */
+#define AM33XX_RST_GLOBAL_WARM_SW_SHIFT 0
+#define AM33XX_RST_GLOBAL_WARM_SW_MASK (1 << 0)
+
+/* Used by PRM_SRAM_COUNT */
+#define AM33XX_SLPCNT_VALUE_SHIFT 16
+#define AM33XX_SLPCNT_VALUE_MASK (0xff << 16)
+
+/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
+#define AM33XX_SRAMLDO_STATUS_SHIFT 8
+#define AM33XX_SRAMLDO_STATUS_MASK (1 << 8)
+
+/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
+#define AM33XX_SRAM_IN_TRANSITION_SHIFT 9
+#define AM33XX_SRAM_IN_TRANSITION_MASK (1 << 9)
+
+/* Used by PRM_SRAM_COUNT */
+#define AM33XX_STARTUP_COUNT_SHIFT 24
+#define AM33XX_STARTUP_COUNT_MASK (0xff << 24)
+
+/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
+#define AM33XX_TRANSITION_EN_SHIFT 8
+#define AM33XX_TRANSITION_EN_MASK (1 << 8)
+
+/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
+#define AM33XX_TRANSITION_ST_SHIFT 8
+#define AM33XX_TRANSITION_ST_MASK (1 << 8)
+
+/* Used by PRM_SRAM_COUNT */
+#define AM33XX_VSETUPCNT_VALUE_SHIFT 8
+#define AM33XX_VSETUPCNT_VALUE_MASK (0xff << 8)
+
+/* Used by PRM_RSTST */
+#define AM33XX_WDT0_RST_SHIFT 3
+#define AM33XX_WDT0_RST_MASK (1 << 3)
+
+/* Used by PRM_RSTST */
+#define AM33XX_WDT1_RST_SHIFT 4
+#define AM33XX_WDT1_RST_MASK (1 << 4)
+
+/* Used by RM_WKUP_RSTCTRL */
+#define AM33XX_WKUP_M3_LRST_SHIFT 3
+#define AM33XX_WKUP_M3_LRST_MASK (1 << 3)
+
+/* Renamed from WKUP_M3_LRST Used by RM_WKUP_RSTST */
+#define AM33XX_WKUP_M3_LRST_5_5_SHIFT 5
+#define AM33XX_WKUP_M3_LRST_5_5_MASK (1 << 5)
+
+#endif
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 9ce7654..a0309de 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -15,6 +15,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/irq.h>
#include "common.h"
#include <plat/cpu.h>
@@ -301,10 +302,65 @@
OMAP3_PRM_IRQENABLE_MPU_OFFSET);
}
+/**
+ * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings. Works
+ * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
+ * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No
+ * return value.
+ */
+void omap3xxx_prm_reconfigure_io_chain(void)
+{
+ int i = 0;
+
+ omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKEN);
+
+ omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+ OMAP3430_ST_IO_CHAIN_MASK,
+ MAX_IOPAD_LATCH_TIME, i);
+ if (i == MAX_IOPAD_LATCH_TIME)
+ pr_warn("PRM: I/O chain clock line assertion timed out\n");
+
+ omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKEN);
+
+ omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKST);
+
+ omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
+}
+
+/**
+ * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
+ *
+ * Activates the I/O wakeup event latches and allows events logged by
+ * those latches to signal a wakeup event to the PRCM. For I/O
+ * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
+ * registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
+ * No return value.
+ */
+static void __init omap3xxx_prm_enable_io_wakeup(void)
+{
+ if (omap3_has_io_wakeup())
+ omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
+ PM_WKEN);
+}
+
static int __init omap3xxx_prcm_init(void)
{
- if (cpu_is_omap34xx())
- return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
- return 0;
+ int ret = 0;
+
+ if (cpu_is_omap34xx()) {
+ omap3xxx_prm_enable_io_wakeup();
+ ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
+ if (!ret)
+ irq_set_status_flags(omap_prcm_event_to_irq("io"),
+ IRQ_NOAUTOEN);
+ }
+
+ return ret;
}
subsys_initcall(omap3xxx_prcm_init);
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index 70ac2a1..c19d249 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -228,68 +228,6 @@
#ifndef __ASSEMBLER__
-/*
- * Stub omap2xxx/omap3xxx functions so that common files
- * continue to build when custom builds are used
- */
-#if defined(CONFIG_ARCH_OMAP4) && !(defined(CONFIG_ARCH_OMAP2) || \
- defined(CONFIG_ARCH_OMAP3))
-static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
- return 0;
-}
-static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
-}
-static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
- s16 module, s16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
- return 0;
-}
-static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
- return 0;
-}
-static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
- return 0;
-}
-static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
- return 0;
-}
-static inline int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
- return 0;
-}
-static inline int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
- return 0;
-}
-static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
- u8 st_shift)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
- return 0;
-}
-#else
/* Power/reset management domain register get/set */
extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx);
extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx);
@@ -315,15 +253,15 @@
extern void omap3_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
+extern void omap3xxx_prm_reconfigure_io_chain(void);
+
/* PRM interrupt-related functions */
extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
extern void omap3xxx_prm_ocp_barrier(void);
extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
-#endif /* CONFIG_ARCH_OMAP4 */
-
-#endif
+#endif /* __ASSEMBLER */
/*
* Bits common to specific registers
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
new file mode 100644
index 0000000..e7dbb6c
--- /dev/null
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -0,0 +1,135 @@
+/*
+ * AM33XX PRM functions
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+
+#include "common.h"
+#include "prm33xx.h"
+#include "prm-regbits-33xx.h"
+
+/* Read a register in a PRM instance */
+u32 am33xx_prm_read_reg(s16 inst, u16 idx)
+{
+ return __raw_readl(prm_base + inst + idx);
+}
+
+/* Write into a register in a PRM instance */
+void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx)
+{
+ __raw_writel(val, prm_base + inst + idx);
+}
+
+/* Read-modify-write a register in PRM. Caller must lock */
+u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(inst, idx);
+ v &= ~mask;
+ v |= bits;
+ am33xx_prm_write_reg(v, inst, idx);
+
+ return v;
+}
+
+/**
+ * am33xx_prm_is_hardreset_asserted - read the HW reset line state of
+ * submodules contained in the hwmod module
+ * @shift: register bit shift corresponding to the reset line to check
+ * @inst: CM instance register offset (*_INST macro)
+ * @rstctrl_offs: RM_RSTCTRL register address offset for this module
+ *
+ * Returns 1 if the (sub)module hardreset line is currently asserted,
+ * 0 if the (sub)module hardreset line is not currently asserted, or
+ * -EINVAL upon parameter error.
+ */
+int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(inst, rstctrl_offs);
+ v &= 1 << shift;
+ v >>= shift;
+
+ return v;
+}
+
+/**
+ * am33xx_prm_assert_hardreset - assert the HW reset line of a submodule
+ * @shift: register bit shift corresponding to the reset line to assert
+ * @inst: CM instance register offset (*_INST macro)
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP. These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block. This function will
+ * place the submodule into reset. Returns 0 upon success or -EINVAL
+ * upon an argument error.
+ */
+int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs)
+{
+ u32 mask = 1 << shift;
+
+ am33xx_prm_rmw_reg_bits(mask, mask, inst, rstctrl_offs);
+
+ return 0;
+}
+
+/**
+ * am33xx_prm_deassert_hardreset - deassert a submodule hardreset line and
+ * wait
+ * @shift: register bit shift corresponding to the reset line to deassert
+ * @inst: CM instance register offset (*_INST macro)
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @rstst_reg: RM_RSTST register address for this module
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP. These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block. This function will
+ * take the submodule out of reset and wait until the PRCM indicates
+ * that the reset has completed before returning. Returns 0 upon success or
+ * -EINVAL upon an argument error, -EEXIST if the submodule was already out
+ * of reset, or -EBUSY if the submodule did not exit reset promptly.
+ */
+int am33xx_prm_deassert_hardreset(u8 shift, s16 inst,
+ u16 rstctrl_offs, u16 rstst_offs)
+{
+ int c;
+ u32 mask = 1 << shift;
+
+ /* Check the current status to avoid de-asserting the line twice */
+ if (am33xx_prm_is_hardreset_asserted(shift, inst, rstctrl_offs) == 0)
+ return -EEXIST;
+
+ /* Clear the reset status by writing 1 to the status bit */
+ am33xx_prm_rmw_reg_bits(0xffffffff, mask, inst, rstst_offs);
+ /* de-assert the reset control line */
+ am33xx_prm_rmw_reg_bits(mask, 0, inst, rstctrl_offs);
+ /* wait the status to be set */
+
+ omap_test_timeout(am33xx_prm_is_hardreset_asserted(shift, inst,
+ rstst_offs),
+ MAX_MODULE_HARDRESET_WAIT, c);
+
+ return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
+}
diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h
new file mode 100644
index 0000000..3f25c56
--- /dev/null
+++ b/arch/arm/mach-omap2/prm33xx.h
@@ -0,0 +1,129 @@
+/*
+ * AM33XX PRM instance offset macros
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM33XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM33XX_H
+
+#include "prcm-common.h"
+#include "prm.h"
+
+#define AM33XX_PRM_BASE 0x44E00000
+
+#define AM33XX_PRM_REGADDR(inst, reg) \
+ AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRM_BASE + (inst) + (reg))
+
+
+/* PRM instances */
+#define AM33XX_PRM_OCP_SOCKET_MOD 0x0B00
+#define AM33XX_PRM_PER_MOD 0x0C00
+#define AM33XX_PRM_WKUP_MOD 0x0D00
+#define AM33XX_PRM_MPU_MOD 0x0E00
+#define AM33XX_PRM_DEVICE_MOD 0x0F00
+#define AM33XX_PRM_RTC_MOD 0x1000
+#define AM33XX_PRM_GFX_MOD 0x1100
+#define AM33XX_PRM_CEFUSE_MOD 0x1200
+
+/* PRM */
+
+/* PRM.OCP_SOCKET_PRM register offsets */
+#define AM33XX_REVISION_PRM_OFFSET 0x0000
+#define AM33XX_REVISION_PRM AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0000)
+#define AM33XX_PRM_IRQSTATUS_MPU_OFFSET 0x0004
+#define AM33XX_PRM_IRQSTATUS_MPU AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0004)
+#define AM33XX_PRM_IRQENABLE_MPU_OFFSET 0x0008
+#define AM33XX_PRM_IRQENABLE_MPU AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0008)
+#define AM33XX_PRM_IRQSTATUS_M3_OFFSET 0x000c
+#define AM33XX_PRM_IRQSTATUS_M3 AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x000c)
+#define AM33XX_PRM_IRQENABLE_M3_OFFSET 0x0010
+#define AM33XX_PRM_IRQENABLE_M3 AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0010)
+
+/* PRM.PER_PRM register offsets */
+#define AM33XX_RM_PER_RSTCTRL_OFFSET 0x0000
+#define AM33XX_RM_PER_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0000)
+#define AM33XX_RM_PER_RSTST_OFFSET 0x0004
+#define AM33XX_RM_PER_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0004)
+#define AM33XX_PM_PER_PWRSTST_OFFSET 0x0008
+#define AM33XX_PM_PER_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0008)
+#define AM33XX_PM_PER_PWRSTCTRL_OFFSET 0x000c
+#define AM33XX_PM_PER_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x000c)
+
+/* PRM.WKUP_PRM register offsets */
+#define AM33XX_RM_WKUP_RSTCTRL_OFFSET 0x0000
+#define AM33XX_RM_WKUP_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0000)
+#define AM33XX_PM_WKUP_PWRSTCTRL_OFFSET 0x0004
+#define AM33XX_PM_WKUP_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0004)
+#define AM33XX_PM_WKUP_PWRSTST_OFFSET 0x0008
+#define AM33XX_PM_WKUP_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0008)
+#define AM33XX_RM_WKUP_RSTST_OFFSET 0x000c
+#define AM33XX_RM_WKUP_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x000c)
+
+/* PRM.MPU_PRM register offsets */
+#define AM33XX_PM_MPU_PWRSTCTRL_OFFSET 0x0000
+#define AM33XX_PM_MPU_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0000)
+#define AM33XX_PM_MPU_PWRSTST_OFFSET 0x0004
+#define AM33XX_PM_MPU_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0004)
+#define AM33XX_RM_MPU_RSTST_OFFSET 0x0008
+#define AM33XX_RM_MPU_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0008)
+
+/* PRM.DEVICE_PRM register offsets */
+#define AM33XX_PRM_RSTCTRL_OFFSET 0x0000
+#define AM33XX_PRM_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0000)
+#define AM33XX_PRM_RSTTIME_OFFSET 0x0004
+#define AM33XX_PRM_RSTTIME AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0004)
+#define AM33XX_PRM_RSTST_OFFSET 0x0008
+#define AM33XX_PRM_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0008)
+#define AM33XX_PRM_SRAM_COUNT_OFFSET 0x000c
+#define AM33XX_PRM_SRAM_COUNT AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x000c)
+#define AM33XX_PRM_LDO_SRAM_CORE_SETUP_OFFSET 0x0010
+#define AM33XX_PRM_LDO_SRAM_CORE_SETUP AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0010)
+#define AM33XX_PRM_LDO_SRAM_CORE_CTRL_OFFSET 0x0014
+#define AM33XX_PRM_LDO_SRAM_CORE_CTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0014)
+#define AM33XX_PRM_LDO_SRAM_MPU_SETUP_OFFSET 0x0018
+#define AM33XX_PRM_LDO_SRAM_MPU_SETUP AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0018)
+#define AM33XX_PRM_LDO_SRAM_MPU_CTRL_OFFSET 0x001c
+#define AM33XX_PRM_LDO_SRAM_MPU_CTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x001c)
+
+/* PRM.RTC_PRM register offsets */
+#define AM33XX_PM_RTC_PWRSTCTRL_OFFSET 0x0000
+#define AM33XX_PM_RTC_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_RTC_MOD, 0x0000)
+#define AM33XX_PM_RTC_PWRSTST_OFFSET 0x0004
+#define AM33XX_PM_RTC_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_RTC_MOD, 0x0004)
+
+/* PRM.GFX_PRM register offsets */
+#define AM33XX_PM_GFX_PWRSTCTRL_OFFSET 0x0000
+#define AM33XX_PM_GFX_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0000)
+#define AM33XX_RM_GFX_RSTCTRL_OFFSET 0x0004
+#define AM33XX_RM_GFX_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0004)
+#define AM33XX_PM_GFX_PWRSTST_OFFSET 0x0010
+#define AM33XX_PM_GFX_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0010)
+#define AM33XX_RM_GFX_RSTST_OFFSET 0x0014
+#define AM33XX_RM_GFX_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0014)
+
+/* PRM.CEFUSE_PRM register offsets */
+#define AM33XX_PM_CEFUSE_PWRSTCTRL_OFFSET 0x0000
+#define AM33XX_PM_CEFUSE_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0000)
+#define AM33XX_PM_CEFUSE_PWRSTST_OFFSET 0x0004
+#define AM33XX_PM_CEFUSE_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004)
+
+extern u32 am33xx_prm_read_reg(s16 inst, u16 idx);
+extern void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx);
+extern u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
+extern void am33xx_prm_global_warm_sw_reset(void);
+extern int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst,
+ u16 rstctrl_offs);
+extern int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs);
+extern int am33xx_prm_deassert_hardreset(u8 shift, s16 inst,
+ u16 rstctrl_offs, u16 rstst_offs);
+#endif
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index f106d21..bb727c2 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -233,10 +233,71 @@
OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
}
+/**
+ * omap44xx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings. Works
+ * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
+ * deasserting WUCLKIN and waiting for WUCLKOUT to be deasserted.
+ * No return value. XXX Are the final two steps necessary?
+ */
+void omap44xx_prm_reconfigure_io_chain(void)
+{
+ int i = 0;
+
+ /* Trigger WUCLKIN enable */
+ omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK,
+ OMAP4430_WUCLK_CTRL_MASK,
+ OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_IO_PMCTRL_OFFSET);
+ omap_test_timeout(
+ (((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_IO_PMCTRL_OFFSET) &
+ OMAP4430_WUCLK_STATUS_MASK) >>
+ OMAP4430_WUCLK_STATUS_SHIFT) == 1),
+ MAX_IOPAD_LATCH_TIME, i);
+ if (i == MAX_IOPAD_LATCH_TIME)
+ pr_warn("PRM: I/O chain clock line assertion timed out\n");
+
+ /* Trigger WUCLKIN disable */
+ omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, 0x0,
+ OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_IO_PMCTRL_OFFSET);
+ omap_test_timeout(
+ (((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_IO_PMCTRL_OFFSET) &
+ OMAP4430_WUCLK_STATUS_MASK) >>
+ OMAP4430_WUCLK_STATUS_SHIFT) == 0),
+ MAX_IOPAD_LATCH_TIME, i);
+ if (i == MAX_IOPAD_LATCH_TIME)
+ pr_warn("PRM: I/O chain clock line deassertion timed out\n");
+
+ return;
+}
+
+/**
+ * omap44xx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
+ *
+ * Activates the I/O wakeup event latches and allows events logged by
+ * those latches to signal a wakeup event to the PRCM. For I/O wakeups
+ * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
+ * omap44xx_prm_reconfigure_io_chain() must be called. No return value.
+ */
+static void __init omap44xx_prm_enable_io_wakeup(void)
+{
+ omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK,
+ OMAP4430_GLOBAL_WUEN_MASK,
+ OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_IO_PMCTRL_OFFSET);
+}
+
static int __init omap4xxx_prcm_init(void)
{
- if (cpu_is_omap44xx())
+ if (cpu_is_omap44xx()) {
+ omap44xx_prm_enable_io_wakeup();
return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
+ }
return 0;
}
subsys_initcall(omap4xxx_prcm_init);
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 7978092..ee72ae6 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -763,6 +763,8 @@
extern void omap4_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
+extern void omap44xx_prm_reconfigure_io_chain(void);
+
/* PRM interrupt-related functions */
extern void omap44xx_prm_read_pending_irqs(unsigned long *events);
extern void omap44xx_prm_ocp_barrier(void);
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index dfe00dd..03b126d 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -85,7 +85,7 @@
unsigned long priority_pending[OMAP_PRCM_MAX_NR_PENDING_REG];
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned int virtirq;
- int nr_irqs = prcm_irq_setup->nr_regs * 32;
+ int nr_irq = prcm_irq_setup->nr_regs * 32;
/*
* If we are suspended, mask all interrupts from PRCM level,
@@ -110,7 +110,7 @@
prcm_irq_setup->read_pending_irqs(pending);
/* No bit set, then all IRQs are handled */
- if (find_first_bit(pending, nr_irqs) >= nr_irqs)
+ if (find_first_bit(pending, nr_irq) >= nr_irq)
break;
omap_prcm_events_filter_priority(pending, priority_pending);
@@ -121,11 +121,11 @@
*/
/* Serve priority events first */
- for_each_set_bit(virtirq, priority_pending, nr_irqs)
+ for_each_set_bit(virtirq, priority_pending, nr_irq)
generic_handle_irq(prcm_irq_setup->base_irq + virtirq);
/* Serve normal events next */
- for_each_set_bit(virtirq, pending, nr_irqs)
+ for_each_set_bit(virtirq, pending, nr_irq)
generic_handle_irq(prcm_irq_setup->base_irq + virtirq);
}
if (chip->irq_ack)
@@ -319,3 +319,65 @@
omap_prcm_irq_cleanup();
return -ENOMEM;
}
+
+/*
+ * Stubbed functions so that common files continue to build when
+ * custom builds are used
+ * XXX These are temporary and should be removed at the earliest possible
+ * opportunity
+ */
+u32 __weak omap2_prm_read_mod_reg(s16 module, u16 idx)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+ return 0;
+}
+
+void __weak omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+}
+
+u32 __weak omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
+ s16 module, s16 idx)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+ return 0;
+}
+
+u32 __weak omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+ return 0;
+}
+
+u32 __weak omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+ return 0;
+}
+
+u32 __weak omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+ return 0;
+}
+
+int __weak omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+ return 0;
+}
+
+int __weak omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+ return 0;
+}
+
+int __weak omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
+ u8 st_shift)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+ return 0;
+}
+
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 292d4aa..c1b93c7 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -57,6 +57,7 @@
struct list_head node;
struct omap_hwmod *oh;
+ struct omap_device_pad default_omap_uart_pads[2];
};
static LIST_HEAD(uart_list);
@@ -126,11 +127,70 @@
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
-static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
+
+#define OMAP_UART_DEFAULT_PAD_NAME_LEN 28
+static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN],
+ tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata;
+
+static void __init
+omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata,
+ struct omap_uart_state *uart)
{
+ uart->default_omap_uart_pads[0].name = rx_pad_name;
+ uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX |
+ OMAP_DEVICE_PAD_WAKEUP;
+ uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT |
+ OMAP_MUX_MODE0;
+ uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0;
+ uart->default_omap_uart_pads[1].name = tx_pad_name;
+ uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT |
+ OMAP_MUX_MODE0;
+ bdata->pads = uart->default_omap_uart_pads;
+ bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads);
+}
+
+static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
+ struct omap_uart_state *uart)
+{
+ struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL;
+ struct omap_mux *rx_mux = NULL, *tx_mux = NULL;
+ char *rx_fmt, *tx_fmt;
+ int uart_nr = bdata->id + 1;
+
+ if (bdata->id != 2) {
+ rx_fmt = "uart%d_rx.uart%d_rx";
+ tx_fmt = "uart%d_tx.uart%d_tx";
+ } else {
+ rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx";
+ tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx";
+ }
+
+ snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt,
+ uart_nr, uart_nr);
+ snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt,
+ uart_nr, uart_nr);
+
+ if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 &&
+ omap_mux_get_by_name
+ (tx_pad_name, &tx_partition, &tx_mux) >= 0) {
+ u16 tx_mode, rx_mode;
+
+ tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset);
+ rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset);
+
+ /*
+ * Check if uart is used in default tx/rx mode i.e. in mux mode0
+ * if yes then configure rx pin for wake up capability
+ */
+ if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode))
+ omap_serial_fill_uart_tx_rx_pads(bdata, uart);
+ }
}
#else
-static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
+static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
+ struct omap_uart_state *uart)
+{
+}
#endif
static char *cmdline_find_option(char *str)
@@ -287,8 +347,7 @@
bdata.pads = NULL;
bdata.pads_cnt = 0;
- if (cpu_is_omap44xx() || cpu_is_omap34xx())
- omap_serial_fill_default_pads(&bdata);
+ omap_serial_check_wakeup(&bdata, uart);
if (!info)
omap_serial_init_port(&bdata, NULL);
diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c
index 955566ee..1da8f03 100644
--- a/arch/arm/mach-omap2/smartreflex-class3.c
+++ b/arch/arm/mach-omap2/smartreflex-class3.c
@@ -11,36 +11,37 @@
* published by the Free Software Foundation.
*/
-#include "smartreflex.h"
+#include <linux/power/smartreflex.h>
+#include "voltage.h"
-static int sr_class3_enable(struct voltagedomain *voltdm)
+static int sr_class3_enable(struct omap_sr *sr)
{
- unsigned long volt = voltdm_get_voltage(voltdm);
+ unsigned long volt = voltdm_get_voltage(sr->voltdm);
if (!volt) {
- pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n",
- __func__, voltdm->name);
+ pr_warning("%s: Curr voltage unknown. Cannot enable %s\n",
+ __func__, sr->name);
return -ENODATA;
}
- omap_vp_enable(voltdm);
- return sr_enable(voltdm, volt);
+ omap_vp_enable(sr->voltdm);
+ return sr_enable(sr->voltdm, volt);
}
-static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset)
+static int sr_class3_disable(struct omap_sr *sr, int is_volt_reset)
{
- sr_disable_errgen(voltdm);
- omap_vp_disable(voltdm);
- sr_disable(voltdm);
+ sr_disable_errgen(sr->voltdm);
+ omap_vp_disable(sr->voltdm);
+ sr_disable(sr->voltdm);
if (is_volt_reset)
- voltdm_reset(voltdm);
+ voltdm_reset(sr->voltdm);
return 0;
}
-static int sr_class3_configure(struct voltagedomain *voltdm)
+static int sr_class3_configure(struct omap_sr *sr)
{
- return sr_configure_errgen(voltdm);
+ return sr_configure_errgen(sr->voltdm);
}
/* SR class3 structure */
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index a503e1e..e107e39 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -17,6 +17,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/power/smartreflex.h>
#include <linux/err.h>
#include <linux/slab.h>
@@ -24,7 +25,6 @@
#include <plat/omap_device.h>
-#include "smartreflex.h"
#include "voltage.h"
#include "control.h"
#include "pm.h"
@@ -36,7 +36,10 @@
struct omap_sr_data *sr_data)
{
struct omap_sr_nvalue_table *nvalue_table;
- int i, count = 0;
+ int i, j, count = 0;
+
+ sr_data->nvalue_count = 0;
+ sr_data->nvalue_table = NULL;
while (volt_data[count].volt_nominal)
count++;
@@ -44,8 +47,14 @@
nvalue_table = kzalloc(sizeof(struct omap_sr_nvalue_table)*count,
GFP_KERNEL);
- for (i = 0; i < count; i++) {
+ if (!nvalue_table) {
+ pr_err("OMAP: SmartReflex: cannot allocate memory for n-value table\n");
+ return;
+ }
+
+ for (i = 0, j = 0; i < count; i++) {
u32 v;
+
/*
* In OMAP4 the efuse registers are 24 bit aligned.
* A __raw_readl will fail for non-32 bit aligned address
@@ -58,15 +67,30 @@
omap_ctrl_readb(offset + 1) << 8 |
omap_ctrl_readb(offset + 2) << 16;
} else {
- v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
+ v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
}
- nvalue_table[i].efuse_offs = volt_data[i].sr_efuse_offs;
- nvalue_table[i].nvalue = v;
+ /*
+ * Many OMAP SoCs don't have the eFuse values set.
+ * For example, pretty much all OMAP3xxx before
+ * ES3.something.
+ *
+ * XXX There needs to be some way for board files or
+ * userspace to add these in.
+ */
+ if (v == 0)
+ continue;
+
+ nvalue_table[j].nvalue = v;
+ nvalue_table[j].efuse_offs = volt_data[i].sr_efuse_offs;
+ nvalue_table[j].errminlimit = volt_data[i].sr_errminlimit;
+ nvalue_table[j].volt_nominal = volt_data[i].volt_nominal;
+
+ j++;
}
sr_data->nvalue_table = nvalue_table;
- sr_data->nvalue_count = count;
+ sr_data->nvalue_count = j;
}
static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
@@ -93,6 +117,7 @@
goto exit;
}
+ sr_data->name = oh->name;
sr_data->ip_type = oh->class->rev;
sr_data->senn_mod = 0x1;
sr_data->senp_mod = 0x1;
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 840929b..13d20c8 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -69,11 +69,6 @@
#define OMAP3_SECURE_TIMER 1
#endif
-/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
-#define MAX_GPTIMER_ID 12
-
-static u32 sys_timer_reserved;
-
/* Clockevent code */
static struct omap_dm_timer clkev;
@@ -173,14 +168,14 @@
return -ENXIO;
/* After the dmtimer is using hwmod these clocks won't be needed */
- sprintf(name, "gpt%d_fck", gptimer_id);
- timer->fclk = clk_get(NULL, name);
+ timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh));
if (IS_ERR(timer->fclk))
return -ENODEV;
omap_hwmod_enable(oh);
- sys_timer_reserved |= (1 << (gptimer_id - 1));
+ if (omap_dm_timer_reserve_systimer(gptimer_id))
+ return -ENODEV;
if (gptimer_id != 12) {
struct clk *src;
@@ -368,6 +363,11 @@
OMAP_SYS_TIMER(3_secure)
#endif
+#ifdef CONFIG_SOC_AM33XX
+OMAP_SYS_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, 2, OMAP4_MPU_SOURCE)
+OMAP_SYS_TIMER(3_am33xx)
+#endif
+
#ifdef CONFIG_ARCH_OMAP4
#ifdef CONFIG_LOCAL_TIMERS
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
@@ -393,65 +393,10 @@
OMAP_SYS_TIMER(4)
#endif
-/**
- * omap2_dm_timer_set_src - change the timer input clock source
- * @pdev: timer platform device pointer
- * @source: array index of parent clock source
- */
-static int omap2_dm_timer_set_src(struct platform_device *pdev, int source)
-{
- int ret;
- struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
- struct clk *fclk, *parent;
- char *parent_name = NULL;
-
- fclk = clk_get(&pdev->dev, "fck");
- if (IS_ERR_OR_NULL(fclk)) {
- dev_err(&pdev->dev, "%s: %d: clk_get() FAILED\n",
- __func__, __LINE__);
- return -EINVAL;
- }
-
- switch (source) {
- case OMAP_TIMER_SRC_SYS_CLK:
- parent_name = "sys_ck";
- break;
-
- case OMAP_TIMER_SRC_32_KHZ:
- parent_name = "32k_ck";
- break;
-
- case OMAP_TIMER_SRC_EXT_CLK:
- if (pdata->timer_ip_version == OMAP_TIMER_IP_VERSION_1) {
- parent_name = "alt_ck";
- break;
- }
- dev_err(&pdev->dev, "%s: %d: invalid clk src.\n",
- __func__, __LINE__);
- clk_put(fclk);
- return -EINVAL;
- }
-
- parent = clk_get(&pdev->dev, parent_name);
- if (IS_ERR_OR_NULL(parent)) {
- dev_err(&pdev->dev, "%s: %d: clk_get() %s FAILED\n",
- __func__, __LINE__, parent_name);
- clk_put(fclk);
- return -EINVAL;
- }
-
- ret = clk_set_parent(fclk, parent);
- if (IS_ERR_VALUE(ret)) {
- dev_err(&pdev->dev, "%s: clk_set_parent() to %s FAILED\n",
- __func__, parent_name);
- ret = -EINVAL;
- }
-
- clk_put(parent);
- clk_put(fclk);
-
- return ret;
-}
+#ifdef CONFIG_SOC_OMAP5
+OMAP_SYS_TIMER_INIT(5, 1, OMAP4_CLKEV_SOURCE, 2, OMAP4_MPU_SOURCE)
+OMAP_SYS_TIMER(5)
+#endif
/**
* omap_timer_init - build and register timer device with an
@@ -473,7 +418,6 @@
struct dmtimer_platform_data *pdata;
struct platform_device *pdev;
struct omap_timer_capability_dev_attr *timer_dev_attr;
- struct powerdomain *pwrdm;
pr_debug("%s: %s\n", __func__, oh->name);
@@ -501,18 +445,9 @@
*/
sscanf(oh->name, "timer%2d", &id);
- pdata->set_timer_src = omap2_dm_timer_set_src;
- pdata->timer_ip_version = oh->class->rev;
+ if (timer_dev_attr)
+ pdata->timer_capability = timer_dev_attr->timer_capability;
- /* Mark clocksource and clockevent timers as reserved */
- if ((sys_timer_reserved >> (id - 1)) & 0x1)
- pdata->reserved = 1;
-
- pwrdm = omap_hwmod_get_pwrdm(oh);
- pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm);
-#ifdef CONFIG_PM
- pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
-#endif
pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
NULL, 0, 0);
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 119d5a9..3882f3c 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -32,6 +32,7 @@
#include "twl-common.h"
#include "pm.h"
#include "voltage.h"
+#include "mux.h"
static struct i2c_board_info __initdata pmic_i2c_board_info = {
.addr = 0x48,
@@ -48,6 +49,7 @@
},
};
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
static int twl_set_voltage(void *data, int target_uV)
{
struct voltagedomain *voltdm = (struct voltagedomain *)data;
@@ -59,6 +61,7 @@
struct voltagedomain *voltdm = (struct voltagedomain *)data;
return voltdm_get_voltage(voltdm);
}
+#endif
void __init omap_pmic_init(int bus, u32 clkrate,
const char *pmic_type, int pmic_irq,
@@ -77,6 +80,7 @@
struct twl6040_platform_data *twl6040_data, int twl6040_irq)
{
/* PMIC part*/
+ omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
strncpy(omap4_i2c1_board_info[0].type, pmic_type,
sizeof(omap4_i2c1_board_info[0].type));
omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
@@ -211,10 +215,6 @@
void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags)
{
- if (!pmic_data->irq_base)
- pmic_data->irq_base = TWL4030_IRQ_BASE;
- if (!pmic_data->irq_end)
- pmic_data->irq_end = TWL4030_IRQ_END;
if (!pmic_data->vdd1) {
omap3_vdd1.driver_data = &omap3_vdd1_drvdata;
omap3_vdd1_drvdata.data = voltdm_lookup("mpu_iva");
@@ -479,11 +479,6 @@
void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags)
{
- if (!pmic_data->irq_base)
- pmic_data->irq_base = TWL6030_IRQ_BASE;
- if (!pmic_data->irq_end)
- pmic_data->irq_end = TWL6030_IRQ_END;
-
if (!pmic_data->vdd1) {
omap4_vdd1.driver_data = &omap4_vdd1_drvdata;
omap4_vdd1_drvdata.data = voltdm_lookup("mpu");
diff --git a/arch/arm/mach-omap2/usb-fs.c b/arch/arm/mach-omap2/usb-fs.c
deleted file mode 100644
index 1481078..0000000
--- a/arch/arm/mach-omap2/usb-fs.c
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <asm/irq.h>
-
-#include <plat/usb.h>
-#include <plat/board.h>
-
-#include "control.h"
-#include "mux.h"
-
-#define INT_USB_IRQ_GEN INT_24XX_USB_IRQ_GEN
-#define INT_USB_IRQ_NISO INT_24XX_USB_IRQ_NISO
-#define INT_USB_IRQ_ISO INT_24XX_USB_IRQ_ISO
-#define INT_USB_IRQ_HGEN INT_24XX_USB_IRQ_HGEN
-#define INT_USB_IRQ_OTG INT_24XX_USB_IRQ_OTG
-
-#if defined(CONFIG_ARCH_OMAP2)
-
-#ifdef CONFIG_USB_GADGET_OMAP
-
-static struct resource udc_resources[] = {
- /* order is significant! */
- { /* registers */
- .start = UDC_BASE,
- .end = UDC_BASE + 0xff,
- .flags = IORESOURCE_MEM,
- }, { /* general IRQ */
- .start = INT_USB_IRQ_GEN,
- .flags = IORESOURCE_IRQ,
- }, { /* PIO IRQ */
- .start = INT_USB_IRQ_NISO,
- .flags = IORESOURCE_IRQ,
- }, { /* SOF IRQ */
- .start = INT_USB_IRQ_ISO,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 udc_dmamask = ~(u32)0;
-
-static struct platform_device udc_device = {
- .name = "omap_udc",
- .id = -1,
- .dev = {
- .dma_mask = &udc_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(udc_resources),
- .resource = udc_resources,
-};
-
-static inline void udc_device_init(struct omap_usb_config *pdata)
-{
- pdata->udc_device = &udc_device;
-}
-
-#else
-
-static inline void udc_device_init(struct omap_usb_config *pdata)
-{
-}
-
-#endif
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32)0;
-
-static struct resource ohci_resources[] = {
- {
- .start = OMAP_OHCI_BASE,
- .end = OMAP_OHCI_BASE + 0xff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_USB_IRQ_HGEN,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ohci_device = {
- .name = "ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(ohci_resources),
- .resource = ohci_resources,
-};
-
-static inline void ohci_device_init(struct omap_usb_config *pdata)
-{
- pdata->ohci_device = &ohci_device;
-}
-
-#else
-
-static inline void ohci_device_init(struct omap_usb_config *pdata)
-{
-}
-
-#endif
-
-#if defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
-
-static struct resource otg_resources[] = {
- /* order is significant! */
- {
- .start = OTG_BASE,
- .end = OTG_BASE + 0xff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = INT_USB_IRQ_OTG,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device otg_device = {
- .name = "omap_otg",
- .id = -1,
- .num_resources = ARRAY_SIZE(otg_resources),
- .resource = otg_resources,
-};
-
-static inline void otg_device_init(struct omap_usb_config *pdata)
-{
- pdata->otg_device = &otg_device;
-}
-
-#else
-
-static inline void otg_device_init(struct omap_usb_config *pdata)
-{
-}
-
-#endif
-
-static void omap2_usb_devconf_clear(u8 port, u32 mask)
-{
- u32 r;
-
- r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- r &= ~USBTXWRMODEI(port, mask);
- omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static void omap2_usb_devconf_set(u8 port, u32 mask)
-{
- u32 r;
-
- r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- r |= USBTXWRMODEI(port, mask);
- omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static void omap2_usb2_disable_5pinbitll(void)
-{
- u32 r;
-
- r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI);
- omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static void omap2_usb2_enable_5pinunitll(void)
-{
- u32 r;
-
- r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI;
- omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device)
-{
- u32 syscon1 = 0;
-
- omap2_usb_devconf_clear(0, USB_BIDIR_TLL);
-
- if (nwires == 0)
- return 0;
-
- if (is_device)
- omap_mux_init_signal("usb0_puen", 0);
-
- omap_mux_init_signal("usb0_dat", 0);
- omap_mux_init_signal("usb0_txen", 0);
- omap_mux_init_signal("usb0_se0", 0);
- if (nwires != 3)
- omap_mux_init_signal("usb0_rcv", 0);
-
- switch (nwires) {
- case 3:
- syscon1 = 2;
- omap2_usb_devconf_set(0, USB_BIDIR);
- break;
- case 4:
- syscon1 = 1;
- omap2_usb_devconf_set(0, USB_BIDIR);
- break;
- case 6:
- syscon1 = 3;
- omap_mux_init_signal("usb0_vp", 0);
- omap_mux_init_signal("usb0_vm", 0);
- omap2_usb_devconf_set(0, USB_UNIDIR);
- break;
- default:
- printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
- 0, nwires);
- }
-
- return syscon1 << 16;
-}
-
-static u32 __init omap2_usb1_init(unsigned nwires)
-{
- u32 syscon1 = 0;
-
- omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
-
- if (nwires == 0)
- return 0;
-
- /* NOTE: board-specific code must set up pin muxing for usb1,
- * since each signal could come out on either of two balls.
- */
-
- switch (nwires) {
- case 2:
- /* NOTE: board-specific code must override this setting if
- * this TLL link is not using DP/DM
- */
- syscon1 = 1;
- omap2_usb_devconf_set(1, USB_BIDIR_TLL);
- break;
- case 3:
- syscon1 = 2;
- omap2_usb_devconf_set(1, USB_BIDIR);
- break;
- case 4:
- syscon1 = 1;
- omap2_usb_devconf_set(1, USB_BIDIR);
- break;
- case 6:
- default:
- printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
- 1, nwires);
- }
-
- return syscon1 << 20;
-}
-
-static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup)
-{
- u32 syscon1 = 0;
-
- omap2_usb2_disable_5pinbitll();
- alt_pingroup = 0;
-
- /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
- if (alt_pingroup || nwires == 0)
- return 0;
-
- omap_mux_init_signal("usb2_dat", 0);
- omap_mux_init_signal("usb2_se0", 0);
- if (nwires > 2)
- omap_mux_init_signal("usb2_txen", 0);
- if (nwires > 3)
- omap_mux_init_signal("usb2_rcv", 0);
-
- switch (nwires) {
- case 2:
- /* NOTE: board-specific code must override this setting if
- * this TLL link is not using DP/DM
- */
- syscon1 = 1;
- omap2_usb_devconf_set(2, USB_BIDIR_TLL);
- break;
- case 3:
- syscon1 = 2;
- omap2_usb_devconf_set(2, USB_BIDIR);
- break;
- case 4:
- syscon1 = 1;
- omap2_usb_devconf_set(2, USB_BIDIR);
- break;
- case 5:
- /* NOTE: board-specific code must mux this setting depending
- * on TLL link using DP/DM. Something must also
- * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
- * 2420: hdq_sio.usb2_tllse0 or vlynq_rx0.usb2_tllse0
- * 2430: hdq_sio.usb2_tllse0 or sdmmc2_dat0.usb2_tllse0
- */
-
- syscon1 = 3;
- omap2_usb2_enable_5pinunitll();
- break;
- case 6:
- default:
- printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
- 2, nwires);
- }
-
- return syscon1 << 24;
-}
-
-void __init omap2_usbfs_init(struct omap_usb_config *pdata)
-{
- struct clk *ick;
-
- if (!cpu_is_omap24xx())
- return;
-
- ick = clk_get(NULL, "usb_l4_ick");
- if (IS_ERR(ick))
- return;
-
- clk_enable(ick);
- pdata->usb0_init = omap2_usb0_init;
- pdata->usb1_init = omap2_usb1_init;
- pdata->usb2_init = omap2_usb2_init;
- udc_device_init(pdata);
- ohci_device_init(pdata);
- otg_device_init(pdata);
- omap_otg_init(pdata);
- clk_disable(ick);
- clk_put(ick);
-}
-
-#endif
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index b19d1b4..c4a5768 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -41,12 +41,10 @@
};
static struct musb_hdrc_platform_data musb_plat = {
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+#else
.mode = MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
- .mode = MUSB_PERIPHERAL,
#endif
/* .clock is set dynamically */
.config = &musb_config,
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index db84a46..805bea6 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -300,7 +300,7 @@
printk(error, 3, status);
return status;
}
- tusb_resources[2].start = irq + IH_GPIO_BASE;
+ tusb_resources[2].start = gpio_to_irq(irq);
/* set up memory timings ... can speed them up later */
if (!ps_refclk) {
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 16a1b09..0ac2caf 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -16,6 +16,8 @@
#include <linux/err.h>
+#include <plat/voltage.h>
+
#include "vc.h"
#include "vp.h"
@@ -91,25 +93,6 @@
};
/**
- * struct omap_volt_data - Omap voltage specific data.
- * @voltage_nominal: The possible voltage value in uV
- * @sr_efuse_offs: The offset of the efuse register(from system
- * control module base address) from where to read
- * the n-target value for the smartreflex module.
- * @sr_errminlimit: Error min limit value for smartreflex. This value
- * differs at differnet opp and thus is linked
- * with voltage.
- * @vp_errorgain: Error gain value for the voltage processor. This
- * field also differs according to the voltage/opp.
- */
-struct omap_volt_data {
- u32 volt_nominal;
- u32 sr_efuse_offs;
- u8 sr_errminlimit;
- u8 vp_errgain;
-};
-
-/**
* struct omap_voltdm_pmic - PMIC specific data required by voltage driver.
* @slew_rate: PMIC slew rate (in uv/us)
* @step_size: PMIC voltage step size (in uv)
@@ -156,6 +139,7 @@
extern void omap2xxx_voltagedomains_init(void);
extern void omap3xxx_voltagedomains_init(void);
+extern void am33xx_voltagedomains_init(void);
extern void omap44xx_voltagedomains_init(void);
struct voltagedomain *voltdm_lookup(const char *name);
diff --git a/arch/arm/mach-omap2/voltagedomains33xx_data.c b/arch/arm/mach-omap2/voltagedomains33xx_data.c
new file mode 100644
index 0000000..965458d
--- /dev/null
+++ b/arch/arm/mach-omap2/voltagedomains33xx_data.c
@@ -0,0 +1,43 @@
+/*
+ * AM33XX voltage domain data
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "voltage.h"
+
+static struct voltagedomain am33xx_voltdm_mpu = {
+ .name = "mpu",
+};
+
+static struct voltagedomain am33xx_voltdm_core = {
+ .name = "core",
+};
+
+static struct voltagedomain am33xx_voltdm_rtc = {
+ .name = "rtc",
+};
+
+static struct voltagedomain *voltagedomains_am33xx[] __initdata = {
+ &am33xx_voltdm_mpu,
+ &am33xx_voltdm_core,
+ &am33xx_voltdm_rtc,
+ NULL,
+};
+
+void __init am33xx_voltagedomains_init(void)
+{
+ voltdm_init(voltagedomains_am33xx);
+}
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index 96484bc..11a3c1e 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -35,5 +35,5 @@
#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204)
#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
-
+#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300)
#endif
diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h
new file mode 100644
index 0000000..1aa5d0a
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <mach/orion5x.h>
+#include <asm/sizes.h>
+
+#define IO_SPACE_LIMIT SZ_2M
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE);
+}
+
+#define __io(a) __io(a)
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 2745f5d..683e085 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -82,6 +82,7 @@
#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000)
+#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000)
#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000)
diff --git a/arch/arm/mach-picoxcell/Makefile b/arch/arm/mach-picoxcell/Makefile
index e5ec4a8..8e39f80 100644
--- a/arch/arm/mach-picoxcell/Makefile
+++ b/arch/arm/mach-picoxcell/Makefile
@@ -1,2 +1 @@
obj-y := common.o
-obj-y += time.o
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
index a2e8ae8..8f9a0b4 100644
--- a/arch/arm/mach-picoxcell/common.c
+++ b/arch/arm/mach-picoxcell/common.c
@@ -14,6 +14,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <linux/dw_apb_timer.h>
#include <asm/mach/arch.h>
#include <asm/hardware/vic.h>
@@ -97,7 +98,7 @@
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = picoxcell_init_irq,
.handle_irq = vic_handle_irq,
- .timer = &picoxcell_timer,
+ .timer = &dw_apb_timer,
.init_machine = picoxcell_init_machine,
.dt_compat = picoxcell_dt_match,
.restart = picoxcell_wdt_restart,
diff --git a/arch/arm/mach-picoxcell/common.h b/arch/arm/mach-picoxcell/common.h
index 83d55ab..a65cb02 100644
--- a/arch/arm/mach-picoxcell/common.h
+++ b/arch/arm/mach-picoxcell/common.h
@@ -12,6 +12,6 @@
#include <asm/mach/time.h>
-extern struct sys_timer picoxcell_timer;
+extern struct sys_timer dw_apb_timer;
#endif /* __PICOXCELL_COMMON_H__ */
diff --git a/arch/arm/mach-picoxcell/time.c b/arch/arm/mach-picoxcell/time.c
deleted file mode 100644
index 2ecba67..0000000
--- a/arch/arm/mach-picoxcell/time.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * All enquiries to support@picochip.com
- */
-#include <linux/dw_apb_timer.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include <asm/mach/time.h>
-#include <asm/sched_clock.h>
-
-#include "common.h"
-
-static void timer_get_base_and_rate(struct device_node *np,
- void __iomem **base, u32 *rate)
-{
- *base = of_iomap(np, 0);
-
- if (!*base)
- panic("Unable to map regs for %s", np->name);
-
- if (of_property_read_u32(np, "clock-freq", rate))
- panic("No clock-freq property for %s", np->name);
-}
-
-static void picoxcell_add_clockevent(struct device_node *event_timer)
-{
- void __iomem *iobase;
- struct dw_apb_clock_event_device *ced;
- u32 irq, rate;
-
- irq = irq_of_parse_and_map(event_timer, 0);
- if (irq == NO_IRQ)
- panic("No IRQ for clock event timer");
-
- timer_get_base_and_rate(event_timer, &iobase, &rate);
-
- ced = dw_apb_clockevent_init(0, event_timer->name, 300, iobase, irq,
- rate);
- if (!ced)
- panic("Unable to initialise clockevent device");
-
- dw_apb_clockevent_register(ced);
-}
-
-static void picoxcell_add_clocksource(struct device_node *source_timer)
-{
- void __iomem *iobase;
- struct dw_apb_clocksource *cs;
- u32 rate;
-
- timer_get_base_and_rate(source_timer, &iobase, &rate);
-
- cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate);
- if (!cs)
- panic("Unable to initialise clocksource device");
-
- dw_apb_clocksource_start(cs);
- dw_apb_clocksource_register(cs);
-}
-
-static void __iomem *sched_io_base;
-
-static u32 picoxcell_read_sched_clock(void)
-{
- return __raw_readl(sched_io_base);
-}
-
-static const struct of_device_id picoxcell_rtc_ids[] __initconst = {
- { .compatible = "picochip,pc3x2-rtc" },
- { /* Sentinel */ },
-};
-
-static void picoxcell_init_sched_clock(void)
-{
- struct device_node *sched_timer;
- u32 rate;
-
- sched_timer = of_find_matching_node(NULL, picoxcell_rtc_ids);
- if (!sched_timer)
- panic("No RTC for sched clock to use");
-
- timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
- of_node_put(sched_timer);
-
- setup_sched_clock(picoxcell_read_sched_clock, 32, rate);
-}
-
-static const struct of_device_id picoxcell_timer_ids[] __initconst = {
- { .compatible = "picochip,pc3x2-timer" },
- {},
-};
-
-static void __init picoxcell_timer_init(void)
-{
- struct device_node *event_timer, *source_timer;
-
- event_timer = of_find_matching_node(NULL, picoxcell_timer_ids);
- if (!event_timer)
- panic("No timer for clockevent");
- picoxcell_add_clockevent(event_timer);
-
- source_timer = of_find_matching_node(event_timer, picoxcell_timer_ids);
- if (!source_timer)
- panic("No timer for clocksource");
- picoxcell_add_clocksource(source_timer);
-
- of_node_put(source_timer);
-
- picoxcell_init_sched_clock();
-}
-
-struct sys_timer picoxcell_timer = {
- .init = picoxcell_timer_init,
-};
diff --git a/arch/arm/mach-prima2/include/mach/gpio.h b/arch/arm/mach-prima2/include/mach/gpio.h
new file mode 100644
index 0000000..1904bb0
--- /dev/null
+++ b/arch/arm/mach-prima2/include/mach/gpio.h
@@ -0,0 +1,13 @@
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+
+/* Pull up/down values */
+enum sirfsoc_gpio_pull {
+ SIRFSOC_GPIO_PULL_NONE,
+ SIRFSOC_GPIO_PULL_UP,
+ SIRFSOC_GPIO_PULL_DOWN,
+};
+
+void sirfsoc_gpio_set_pull(unsigned gpio, unsigned mode);
+
+#endif
diff --git a/arch/arm/mach-prima2/include/mach/irqs.h b/arch/arm/mach-prima2/include/mach/irqs.h
index bb354f9..f6014a0 100644
--- a/arch/arm/mach-prima2/include/mach/irqs.h
+++ b/arch/arm/mach-prima2/include/mach/irqs.h
@@ -11,7 +11,7 @@
#define SIRFSOC_INTENAL_IRQ_START 0
#define SIRFSOC_INTENAL_IRQ_END 59
-
+#define SIRFSOC_GPIO_IRQ_START (SIRFSOC_INTENAL_IRQ_END + 1)
#define NR_IRQS 220
#endif
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index d09da6a..d3de84b 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -127,7 +127,11 @@
GPIO19_SSP2_SCLK,
GPIO86_SSP2_RXD,
GPIO87_SSP2_TXD,
- GPIO88_GPIO,
+ GPIO88_GPIO | MFP_LPM_DRIVE_HIGH, /* TSC2046_CS */
+
+ /* BQ24022 Regulator */
+ GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_nCHARGE_EN */
+ GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_ISET2 */
/* HX4700 specific input GPIOs */
GPIO12_GPIO | WAKEUP_ON_EDGE_RISE, /* ASIC3_IRQ */
@@ -135,6 +139,10 @@
GPIO14_GPIO, /* nWLAN_IRQ */
/* HX4700 specific output GPIOs */
+ GPIO61_GPIO | MFP_LPM_DRIVE_HIGH, /* W3220_nRESET */
+ GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* ASIC3_nRESET */
+ GPIO81_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_GP_nRESET */
+ GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_HW_nRESET */
GPIO102_GPIO | MFP_LPM_DRIVE_LOW, /* SYNAPTICS_POWER_ON */
GPIO10_GPIO, /* GSM_IRQ */
@@ -872,14 +880,19 @@
{ GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
{ GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
{ GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" },
+ { GPIO61_HX4700_W3220_nRESET, GPIOF_OUT_INIT_HIGH, "W3220_nRESET" },
{ GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
+ { GPIO81_HX4700_CPU_GP_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" },
{ GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
+ { GPIO116_HX4700_CPU_HW_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" },
};
static void __init hx4700_init(void)
{
int ret;
+ PCFR = PCFR_GPR_EN | PCFR_OPDE;
+
pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
index cf0e669..3e4fa84 100644
--- a/arch/arm/mach-rpc/irq.c
+++ b/arch/arm/mach-rpc/irq.c
@@ -163,6 +163,6 @@
}
}
- init_FIQ();
+ init_FIQ(FIQ_START);
}
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
index 8702ecf..14a81c2 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c
@@ -144,7 +144,8 @@
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
- CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &hsspi_mux.clk),
+ /* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */
+ CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk),
};
void __init s3c2416_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c
index 414364e..cb2883d 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c
@@ -106,7 +106,7 @@
static struct clk s3c2440_clk_ac97 = {
.name = "ac97",
.enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2440_CLKCON_CAMERA,
+ .ctrlbit = S3C2440_CLKCON_AC97,
};
static unsigned long s3c2440_fclk_n_getrate(struct clk *clk)
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
index a4c5a52..7f689ce 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c
@@ -181,7 +181,7 @@
static struct clk_lookup s3c2443_clk_lookup[] = {
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
- CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_hsspi.clk),
+ CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk),
};
void __init s3c2443_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c
index aeeb2be..aeb4a24 100644
--- a/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/common-s3c2443.c
@@ -559,7 +559,7 @@
static struct clk hsspi_clk = {
.name = "spi",
- .devname = "s3c64xx-spi.0",
+ .devname = "s3c2443-spi.0",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_HSSPI,
@@ -633,7 +633,7 @@
CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
- CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &hsspi_clk),
+ CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk),
};
void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
index 084604b..87e75a2 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -182,19 +182,21 @@
&smdk_led7,
};
+static const struct gpio smdk_led_gpios[] = {
+ { S3C2410_GPF(4), GPIOF_OUT_INIT_HIGH, NULL },
+ { S3C2410_GPF(5), GPIOF_OUT_INIT_HIGH, NULL },
+ { S3C2410_GPF(6), GPIOF_OUT_INIT_HIGH, NULL },
+ { S3C2410_GPF(7), GPIOF_OUT_INIT_HIGH, NULL },
+};
+
void __init smdk_machine_init(void)
{
/* Configure the LEDs (even if we have no LED support)*/
- s3c_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
- s3c_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
- s3c_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
- s3c_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
-
- s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
- s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
- s3c2410_gpio_setpin(S3C2410_GPF(6), 1);
- s3c2410_gpio_setpin(S3C2410_GPF(7), 1);
+ int ret = gpio_request_array(smdk_led_gpios,
+ ARRAY_SIZE(smdk_led_gpios));
+ if (!WARN_ON(ret < 0))
+ gpio_free_array(smdk_led_gpios, ARRAY_SIZE(smdk_led_gpios));
if (machine_is_smdk2443())
smdk_nand_info.twrph0 = 50;
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 56cdd34..0c9e9a7 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -41,7 +41,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h b/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h
deleted file mode 100644
index 4c38b39..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/bast-pmu.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * Vincent Sanders <vince@simtec.co.uk>
- *
- * Machine BAST - Power Management chip
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTPMU_H
-#define __ASM_ARCH_BASTPMU_H "08_OCT_2004"
-
-#define BASTPMU_REG_IDENT (0x00)
-#define BASTPMU_REG_VERSION (0x01)
-#define BASTPMU_REG_DDCCTRL (0x02)
-#define BASTPMU_REG_POWER (0x03)
-#define BASTPMU_REG_RESET (0x04)
-#define BASTPMU_REG_GWO (0x05)
-#define BASTPMU_REG_WOL (0x06)
-#define BASTPMU_REG_WOR (0x07)
-#define BASTPMU_REG_UID (0x09)
-
-#define BASTPMU_EEPROM (0xC0)
-
-#define BASTPMU_EEP_UID (BASTPMU_EEPROM + 0)
-#define BASTPMU_EEP_WOL (BASTPMU_EEPROM + 8)
-#define BASTPMU_EEP_WOR (BASTPMU_EEPROM + 9)
-
-#define BASTPMU_IDENT_0 0x53
-#define BASTPMU_IDENT_1 0x42
-#define BASTPMU_IDENT_2 0x50
-#define BASTPMU_IDENT_3 0x4d
-
-#define BASTPMU_RESET_GUARD (0x55)
-
-#endif /* __ASM_ARCH_BASTPMU_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
index 019ea86..3890a05 100644
--- a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
+++ b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
@@ -93,26 +93,5 @@
#define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr))
#define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr))
-/* compatibility until drivers can be modified */
-
-#define S3C2410_GPA0 S3C2410_GPA(0)
-#define S3C2410_GPA1 S3C2410_GPA(1)
-#define S3C2410_GPA3 S3C2410_GPA(3)
-#define S3C2410_GPA7 S3C2410_GPA(7)
-
-#define S3C2410_GPE0 S3C2410_GPE(0)
-#define S3C2410_GPE1 S3C2410_GPE(1)
-#define S3C2410_GPE2 S3C2410_GPE(2)
-#define S3C2410_GPE3 S3C2410_GPE(3)
-#define S3C2410_GPE4 S3C2410_GPE(4)
-#define S3C2410_GPE5 S3C2410_GPE(5)
-#define S3C2410_GPE6 S3C2410_GPE(6)
-#define S3C2410_GPE7 S3C2410_GPE(7)
-#define S3C2410_GPE8 S3C2410_GPE(8)
-#define S3C2410_GPE9 S3C2410_GPE(9)
-#define S3C2410_GPE10 S3C2410_GPE(10)
-
-#define S3C2410_GPH10 S3C2410_GPH(10)
-
#endif /* __MACH_GPIONRS_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/gta02.h b/arch/arm/mach-s3c24xx/include/mach/gta02.h
index 3a56a22..2173934 100644
--- a/arch/arm/mach-s3c24xx/include/mach/gta02.h
+++ b/arch/arm/mach-s3c24xx/include/mach/gta02.h
@@ -3,82 +3,13 @@
#include <mach/regs-gpio.h>
-/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
-#define GTA02v1_SYSTEM_REV 0x00000310
-#define GTA02v2_SYSTEM_REV 0x00000320
-#define GTA02v3_SYSTEM_REV 0x00000330
-#define GTA02v4_SYSTEM_REV 0x00000340
-#define GTA02v5_SYSTEM_REV 0x00000350
-/* since A7 is basically same as A6, we use A6 PCB ID */
-#define GTA02v6_SYSTEM_REV 0x00000360
-
-#define GTA02_GPIO_n3DL_GSM S3C2410_GPA(13) /* v1 + v2 + v3 only */
-
-#define GTA02_GPIO_PWR_LED1 S3C2410_GPB(0)
-#define GTA02_GPIO_PWR_LED2 S3C2410_GPB(1)
#define GTA02_GPIO_AUX_LED S3C2410_GPB(2)
-#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB(3)
-#define GTA02_GPIO_MODEM_RST S3C2410_GPB(5)
-#define GTA02_GPIO_BT_EN S3C2410_GPB(6)
-#define GTA02_GPIO_MODEM_ON S3C2410_GPB(7)
-#define GTA02_GPIO_EXTINT8 S3C2410_GPB(8)
#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9)
-
-#define GTA02_GPIO_PIO5 S3C2410_GPC(5) /* v3 + v4 only */
-
-#define GTA02v3_GPIO_nG1_CS S3C2410_GPD(12) /* v3 + v4 only */
-#define GTA02v3_GPIO_nG2_CS S3C2410_GPD(13) /* v3 + v4 only */
-#define GTA02v5_GPIO_HDQ S3C2410_GPD(14) /* v5 + */
-
-#define GTA02_GPIO_nG1_INT S3C2410_GPF(0)
-#define GTA02_GPIO_IO1 S3C2410_GPF(1)
-#define GTA02_GPIO_PIO_2 S3C2410_GPF(2) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_JACK_INSERT S3C2410_GPF(4)
-#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF(5) /* v2 + v3 + v4 only */
#define GTA02_GPIO_AUX_KEY S3C2410_GPF(6)
#define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7)
-
-#define GTA02_GPIO_3D_IRQ S3C2410_GPG(4)
-#define GTA02v2_GPIO_nG2_INT S3C2410_GPG(8) /* v2 + v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_OC S3C2410_GPG(9) /* v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */
-#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */
-
#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */
-#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2)
#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4)
-#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5)
-#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */
-#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7)
-#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8)
-#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8)
-#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10)
-#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */
-#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0
-#define GTA02_IRQ_MODEM IRQ_EINT1
-#define GTA02_IRQ_PIO_2 IRQ_EINT2 /* v2 + v3 + v4 only */
-#define GTA02_IRQ_nJACK_INSERT IRQ_EINT4
-#define GTA02_IRQ_WLAN_GPIO1 IRQ_EINT5
-#define GTA02_IRQ_AUX IRQ_EINT6
-#define GTA02_IRQ_nHOLD IRQ_EINT7
#define GTA02_IRQ_PCF50633 IRQ_EINT9
-#define GTA02_IRQ_3D IRQ_EINT12
-#define GTA02_IRQ_GSENSOR_2 IRQ_EINT16 /* v2 + v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_OC IRQ_EINT17 /* v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_FLT IRQ_EINT18 /* v3 + v4 only */
-#define GTA02v3_IRQ_nGSM_OC IRQ_EINT19 /* v3 + v4 only */
-
-/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */
-#define GTA02_PCB_ID1_0 S3C2410_GPC(13)
-#define GTA02_PCB_ID1_1 S3C2410_GPC(15)
-#define GTA02_PCB_ID1_2 S3C2410_GPD(0)
-#define GTA02_PCB_ID2_0 S3C2410_GPD(3)
-#define GTA02_PCB_ID2_1 S3C2410_GPD(4)
-
-int gta02_get_pcb_revision(void);
#endif /* _GTA02_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
index cac1ad6..a11a638 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
@@ -302,7 +302,7 @@
/* S3C2410:
* Port G consists of 8 GPIO/IRQ/Special function
*
- * GPGCON has 2 bits for each of the input pins on port F
+ * GPGCON has 2 bits for each of the input pins on port G
* 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
*
* pull up works like all other ports.
@@ -366,7 +366,7 @@
/* Port H consists of11 GPIO/serial/Misc pins
*
- * GPGCON has 2 bits for each of the input pins on port F
+ * GPHCON has 2 bits for each of the input pins on port H
* 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
*
* pull up works like all other ports.
@@ -427,6 +427,19 @@
* for the 2412/2413 from the 2410/2440/2442
*/
+/*
+ * Port J consists of 13 GPIO/Camera pins. GPJCON has 2 bits
+ * for each of the pins on port J.
+ * 00 - input, 01 output, 10 - camera
+ *
+ * Pull up works like all other ports.
+ */
+
+#define S3C2413_GPJCON S3C2410_GPIOREG(0x80)
+#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84)
+#define S3C2413_GPJUP S3C2410_GPIOREG(0x88)
+#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C)
+
/* S3C2443 and above */
#define S3C2440_GPJCON S3C2410_GPIOREG(0xD0)
#define S3C2440_GPJDAT S3C2410_GPIOREG(0xD4)
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h
deleted file mode 100644
index 19575e0..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2440 GPIO J register definitions
-*/
-
-
-#ifndef __ASM_ARCH_REGS_GPIOJ_H
-#define __ASM_ARCH_REGS_GPIOJ_H "gpioj"
-
-/* Port J consists of 13 GPIO/Camera pins
- *
- * GPJCON has 2 bits for each of the input pins on port F
- * 00 = 0 input, 1 output, 2 Camera
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2413_GPJCON S3C2410_GPIOREG(0x80)
-#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84)
-#define S3C2413_GPJUP S3C2410_GPIOREG(0x88)
-#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C)
-
-#define S3C2440_GPJ0_OUTP (0x01 << 0)
-#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0)
-
-#define S3C2440_GPJ1_OUTP (0x01 << 2)
-#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2)
-
-#define S3C2440_GPJ2_OUTP (0x01 << 4)
-#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4)
-
-#define S3C2440_GPJ3_OUTP (0x01 << 6)
-#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6)
-
-#define S3C2440_GPJ4_OUTP (0x01 << 8)
-#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8)
-
-#define S3C2440_GPJ5_OUTP (0x01 << 10)
-#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10)
-
-#define S3C2440_GPJ6_OUTP (0x01 << 12)
-#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12)
-
-#define S3C2440_GPJ7_OUTP (0x01 << 14)
-#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14)
-
-#define S3C2440_GPJ8_OUTP (0x01 << 16)
-#define S3C2440_GPJ8_CAMPCLK (0x02 << 16)
-
-#define S3C2440_GPJ9_OUTP (0x01 << 18)
-#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18)
-
-#define S3C2440_GPJ10_OUTP (0x01 << 20)
-#define S3C2440_GPJ10_CAMHREF (0x02 << 20)
-
-#define S3C2440_GPJ11_OUTP (0x01 << 22)
-#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22)
-
-#define S3C2440_GPJ12_OUTP (0x01 << 24)
-#define S3C2440_GPJ12_CAMRESET (0x02 << 24)
-
-#endif /* __ASM_ARCH_REGS_GPIOJ_H */
-
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 0f29f64..92e1f93 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -71,7 +71,6 @@
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
#include <mach/fb.h>
#include <plat/usb-control.h>
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index f092b18..bd6d252 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -634,8 +634,8 @@
s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
/* Turn the backlight early on */
- WARN_ON(gpio_request(S3C2410_GPG(4), "backlight"));
- gpio_direction_output(S3C2410_GPG(4), 1);
+ WARN_ON(gpio_request_one(S3C2410_GPG(4), GPIOF_OUT_INIT_HIGH, NULL));
+ gpio_free(S3C2410_GPG(4));
/* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index b868ddd..678bbca 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -47,7 +47,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
#include <mach/leds-gpio.h>
#include <mach/regs-lcd.h>
#include <plat/regs-serial.h>
@@ -325,8 +324,9 @@
}
s3c24xx_fb_set_platdata(&qt2410_fb_info);
- s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
+ /* set initial state of the LED GPIO */
+ WARN_ON(gpio_request_one(S3C2410_GPB(0), GPIOF_OUT_INIT_HIGH, NULL));
+ gpio_free(S3C2410_GPB(0));
s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
s3c_i2c0_set_platdata(NULL);
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index a6762aa..7ee73f2 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -42,7 +42,6 @@
#include <asm/mach-types.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
#include <mach/regs-lcd.h>
#include <mach/h1940.h>
#include <mach/fb.h>
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2410.c b/arch/arm/mach-s3c24xx/pm-s3c2410.c
index 03f706d..949ae05 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2410.c
@@ -77,8 +77,10 @@
__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
}
- if ( machine_is_aml_m5900() )
- s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
+ if (machine_is_aml_m5900()) {
+ gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPF(2));
+ }
if (machine_is_rx1950()) {
/* According to S3C2442 user's manual, page 7-17,
@@ -103,8 +105,10 @@
tmp &= S3C2410_GSTATUS2_OFFRESET;
__raw_writel(tmp, S3C2410_GSTATUS2);
- if ( machine_is_aml_m5900() )
- s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+ if (machine_is_aml_m5900()) {
+ gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
+ gpio_free(S3C2410_GPF(2));
+ }
}
struct syscore_ops s3c2410_pm_syscore_ops = {
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c
index d045885..c60f67a 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c
@@ -26,7 +26,6 @@
#include <asm/irq.h>
#include <mach/regs-power.h>
-#include <mach/regs-gpioj.h>
#include <mach/regs-gpio.h>
#include <mach/regs-dsc.h>
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
index d4bc7f9..6c5f403 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -39,7 +39,6 @@
#include <plat/regs-serial.h>
#include <mach/regs-power.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
#include <mach/regs-dsc.h>
#include <plat/regs-spi.h>
#include <mach/regs-s3c2412.h>
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index 6f74118..b0b60a1 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -36,7 +36,6 @@
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
#include <mach/regs-dsc.h>
#include <plat/s3c2410.h>
diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c24xx/setup-spi.c
index 5712c85..3d47e02 100644
--- a/arch/arm/mach-s3c24xx/setup-spi.c
+++ b/arch/arm/mach-s3c24xx/setup-spi.c
@@ -13,20 +13,12 @@
#include <linux/platform_device.h>
#include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
-struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 13,
- .tx_st_done = 21,
- .high_speed = 1,
-};
-
-int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
+int s3c64xx_spi0_cfg_gpio(void)
{
/* enable hsspi bit in misccr */
s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
diff --git a/arch/arm/mach-s3c24xx/setup-ts.c b/arch/arm/mach-s3c24xx/setup-ts.c
index ed26386..4e11aff 100644
--- a/arch/arm/mach-s3c24xx/setup-ts.c
+++ b/arch/arm/mach-s3c24xx/setup-ts.c
@@ -16,7 +16,6 @@
struct platform_device; /* don't need the contents */
#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
/**
* s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems
@@ -27,8 +26,5 @@
*/
void s3c24xx_ts_cfg_gpio(struct platform_device *dev)
{
- s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
- s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON);
- s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
- s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
+ s3c_gpio_cfgpin_range(S3C2410_GPG(12), 4, S3C_GPIO_SFN(3));
}
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 52f079a..28041e8 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -178,13 +178,13 @@
.ctrlbit = S3C_CLKCON_PCLK_KEYPAD,
}, {
.name = "spi",
- .devname = "s3c64xx-spi.0",
+ .devname = "s3c6410-spi.0",
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_SPI0,
}, {
.name = "spi",
- .devname = "s3c64xx-spi.1",
+ .devname = "s3c6410-spi.1",
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_SPI1,
@@ -331,7 +331,7 @@
static struct clk clk_48m_spi0 = {
.name = "spi_48m",
- .devname = "s3c64xx-spi.0",
+ .devname = "s3c6410-spi.0",
.parent = &clk_48m,
.enable = s3c64xx_sclk_ctrl,
.ctrlbit = S3C_CLKCON_SCLK_SPI0_48,
@@ -339,7 +339,7 @@
static struct clk clk_48m_spi1 = {
.name = "spi_48m",
- .devname = "s3c64xx-spi.1",
+ .devname = "s3c6410-spi.1",
.parent = &clk_48m,
.enable = s3c64xx_sclk_ctrl,
.ctrlbit = S3C_CLKCON_SCLK_SPI1_48,
@@ -802,7 +802,7 @@
static struct clksrc_clk clk_sclk_spi0 = {
.clk = {
.name = "spi-bus",
- .devname = "s3c64xx-spi.0",
+ .devname = "s3c6410-spi.0",
.ctrlbit = S3C_CLKCON_SCLK_SPI0,
.enable = s3c64xx_sclk_ctrl,
},
@@ -814,7 +814,7 @@
static struct clksrc_clk clk_sclk_spi1 = {
.clk = {
.name = "spi-bus",
- .devname = "s3c64xx-spi.1",
+ .devname = "s3c6410-spi.1",
.ctrlbit = S3C_CLKCON_SCLK_SPI1,
.enable = s3c64xx_sclk_ctrl,
},
@@ -858,10 +858,10 @@
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
- CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
- CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_48m_spi0),
- CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
- CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_48m_spi1),
+ CLKDEV_INIT("s3c6410-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0),
+ CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1),
};
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
index 4cb2f951..4c3c999 100644
--- a/arch/arm/mach-s3c64xx/include/mach/crag6410.h
+++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
@@ -13,9 +13,7 @@
#include <linux/gpio.h>
-#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
-#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
-#define CODEC_IRQ_BASE (IRQ_BOARD_START + 128)
+#define GLENFARCLAS_PMIC_IRQ_BASE IRQ_BOARD_START
#define PCA935X_GPIO_BASE GPIO_BOARD_START
#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index fe1a98c..57b1ff4 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -21,6 +21,7 @@
*/
enum dma_ch {
/* DMA0/SDMA0 */
+ DMACH_DT_PROP = -1, /* not yet supported, do not use */
DMACH_UART0 = 0,
DMACH_UART0_SRC2,
DMACH_UART1,
diff --git a/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
deleted file mode 100644
index 9d0c43b..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
- *
- * Copyright (C) 2009 Samsung Electronics Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S3C64XX_PLAT_SPI_CLKS_H
-#define __S3C64XX_PLAT_SPI_CLKS_H __FILE__
-
-#define S3C64XX_SPI_SRCCLK_PCLK 0
-#define S3C64XX_SPI_SRCCLK_SPIBUS 1
-#define S3C64XX_SPI_SRCCLK_48M 2
-
-#endif /* __S3C64XX_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 7a27f56..9e382e7 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -29,7 +29,6 @@
#include <mach/crag6410.h>
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
- .set_level = gpio_set_value,
.line = S3C64XX_GPC(3),
};
@@ -39,6 +38,7 @@
.bus_num = 0,
.chip_select = 0,
.mode = SPI_MODE_0,
+ .irq = S3C_EINT(5),
.controller_data = &wm0010_spi_csinfo,
},
};
@@ -168,7 +168,6 @@
.gpio_defaults = {
0x3, /* IRQ out, active high, CMOS */
},
- .irq_base = CODEC_IRQ_BASE,
.ldo = {
{ .init_data = &wm8994_ldo1, },
{ .init_data = &wm8994_ldo2, },
@@ -182,6 +181,11 @@
},
};
+static const struct i2c_board_info wm5102_devs[] = {
+ { I2C_BOARD_INFO("wm5102", 0x1a),
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, },
+};
+
static const struct i2c_board_info wm6230_i2c_devs[] = {
{ I2C_BOARD_INFO("wm9081", 0x6c),
.platform_data = &wm9081_pdata, },
@@ -209,6 +213,7 @@
.spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
{ .id = 0x32, .name = "XXXX-EV1 Caol Illa" },
{ .id = 0x33, .name = "XXXX-EV1 Oban" },
+ { .id = 0x34, .name = "WM0010-6320-CS42 Balblair" },
{ .id = 0x39, .name = "1254-EV1 Dallas Dhu",
.i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
{ .id = 0x3a, .name = "1259-EV1 Tobermory",
@@ -218,6 +223,8 @@
{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
{ .id = 0x3d, .name = "1277-EV1 Littlemill",
.i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
+ { .id = 0x3e, .name = "WM5102-6271-EV1-CS127",
+ .i2c_devs = wm5102_devs, .num_i2c_devs = ARRAY_SIZE(wm5102_devs) },
};
static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index d0c352d..09cd812 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -171,7 +171,7 @@
};
/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = {
+static struct s3c_fb_platdata crag6410_lcd_pdata __devinitdata = {
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.vtiming = &crag6410_lcd_timing,
.win[0] = &crag6410_fb_win0,
@@ -181,7 +181,7 @@
/* 2x6 keypad */
-static uint32_t crag6410_keymap[] __initdata = {
+static uint32_t crag6410_keymap[] __devinitdata = {
/* KEY(row, col, keycode) */
KEY(0, 0, KEY_VOLUMEUP),
KEY(0, 1, KEY_HOME),
@@ -197,12 +197,12 @@
KEY(1, 5, KEY_CAMERA),
};
-static struct matrix_keymap_data crag6410_keymap_data __initdata = {
+static struct matrix_keymap_data crag6410_keymap_data __devinitdata = {
.keymap = crag6410_keymap,
.keymap_size = ARRAY_SIZE(crag6410_keymap),
};
-static struct samsung_keypad_platdata crag6410_keypad_data __initdata = {
+static struct samsung_keypad_platdata crag6410_keypad_data __devinitdata = {
.keymap_data = &crag6410_keymap_data,
.rows = 2,
.cols = 6,
@@ -373,11 +373,11 @@
.dvs_gpio = S3C64XX_GPK(0),
};
-static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
+static struct regulator_consumer_supply vddarm_consumers[] __devinitdata = {
REGULATOR_SUPPLY("vddarm", NULL),
};
-static struct regulator_init_data vddarm __initdata = {
+static struct regulator_init_data vddarm __devinitdata = {
.constraints = {
.name = "VDDARM",
.min_uV = 1000000,
@@ -391,11 +391,11 @@
.driver_data = &vddarm_pdata,
};
-static struct regulator_consumer_supply vddint_consumers[] __initdata = {
+static struct regulator_consumer_supply vddint_consumers[] __devinitdata = {
REGULATOR_SUPPLY("vddint", NULL),
};
-static struct regulator_init_data vddint __initdata = {
+static struct regulator_init_data vddint __devinitdata = {
.constraints = {
.name = "VDDINT",
.min_uV = 1000000,
@@ -408,27 +408,27 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddmem __initdata = {
+static struct regulator_init_data vddmem __devinitdata = {
.constraints = {
.name = "VDDMEM",
.always_on = 1,
},
};
-static struct regulator_init_data vddsys __initdata = {
+static struct regulator_init_data vddsys __devinitdata = {
.constraints = {
.name = "VDDSYS,VDDEXT,VDDPCM,VDDSS",
.always_on = 1,
},
};
-static struct regulator_consumer_supply vddmmc_consumers[] __initdata = {
+static struct regulator_consumer_supply vddmmc_consumers[] __devinitdata = {
REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"),
REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
};
-static struct regulator_init_data vddmmc __initdata = {
+static struct regulator_init_data vddmmc __devinitdata = {
.constraints = {
.name = "VDDMMC,UH",
.always_on = 1,
@@ -438,7 +438,7 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddotgi __initdata = {
+static struct regulator_init_data vddotgi __devinitdata = {
.constraints = {
.name = "VDDOTGi",
.always_on = 1,
@@ -446,7 +446,7 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddotg __initdata = {
+static struct regulator_init_data vddotg __devinitdata = {
.constraints = {
.name = "VDDOTG",
.always_on = 1,
@@ -454,7 +454,7 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddhi __initdata = {
+static struct regulator_init_data vddhi __devinitdata = {
.constraints = {
.name = "VDDHI",
.always_on = 1,
@@ -462,7 +462,7 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddadc __initdata = {
+static struct regulator_init_data vddadc __devinitdata = {
.constraints = {
.name = "VDDADC,VDDDAC",
.always_on = 1,
@@ -470,7 +470,7 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddmem0 __initdata = {
+static struct regulator_init_data vddmem0 __devinitdata = {
.constraints = {
.name = "VDDMEM0",
.always_on = 1,
@@ -478,7 +478,7 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddpll __initdata = {
+static struct regulator_init_data vddpll __devinitdata = {
.constraints = {
.name = "VDDPLL",
.always_on = 1,
@@ -486,7 +486,7 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddlcd __initdata = {
+static struct regulator_init_data vddlcd __devinitdata = {
.constraints = {
.name = "VDDLCD",
.always_on = 1,
@@ -494,7 +494,7 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddalive __initdata = {
+static struct regulator_init_data vddalive __devinitdata = {
.constraints = {
.name = "VDDALIVE",
.always_on = 1,
@@ -502,30 +502,29 @@
.supply_regulator = "WALLVDD",
};
-static struct wm831x_backup_pdata banff_backup_pdata __initdata = {
+static struct wm831x_backup_pdata banff_backup_pdata __devinitdata = {
.charger_enable = 1,
.vlim = 2500, /* mV */
.ilim = 200, /* uA */
};
-static struct wm831x_status_pdata banff_red_led __initdata = {
+static struct wm831x_status_pdata banff_red_led __devinitdata = {
.name = "banff:red:",
.default_src = WM831X_STATUS_MANUAL,
};
-static struct wm831x_status_pdata banff_green_led __initdata = {
+static struct wm831x_status_pdata banff_green_led __devinitdata = {
.name = "banff:green:",
.default_src = WM831X_STATUS_MANUAL,
};
-static struct wm831x_touch_pdata touch_pdata __initdata = {
+static struct wm831x_touch_pdata touch_pdata __devinitdata = {
.data_irq = S3C_EINT(26),
.pd_irq = S3C_EINT(27),
};
-static struct wm831x_pdata crag_pmic_pdata __initdata = {
+static struct wm831x_pdata crag_pmic_pdata __devinitdata = {
.wm831x_num = 1,
- .irq_base = BANFF_PMIC_IRQ_BASE,
.gpio_base = BANFF_PMIC_GPIO_BASE,
.soft_shutdown = true,
@@ -568,7 +567,7 @@
.touch = &touch_pdata,
};
-static struct i2c_board_info i2c_devs0[] __initdata = {
+static struct i2c_board_info i2c_devs0[] __devinitdata = {
{ I2C_BOARD_INFO("24c08", 0x50), },
{ I2C_BOARD_INFO("tca6408", 0x20),
.platform_data = &crag6410_pca_data,
@@ -583,12 +582,12 @@
.frequency = 400000,
};
-static struct regulator_consumer_supply pvdd_1v2_consumers[] __initdata = {
+static struct regulator_consumer_supply pvdd_1v2_consumers[] __devinitdata = {
REGULATOR_SUPPLY("DCVDD", "spi0.0"),
REGULATOR_SUPPLY("AVDD", "spi0.0"),
};
-static struct regulator_init_data pvdd_1v2 __initdata = {
+static struct regulator_init_data pvdd_1v2 __devinitdata = {
.constraints = {
.name = "PVDD_1V2",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -598,7 +597,7 @@
.num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers),
};
-static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+static struct regulator_consumer_supply pvdd_1v8_consumers[] __devinitdata = {
REGULATOR_SUPPLY("LDOVDD", "1-001a"),
REGULATOR_SUPPLY("PLLVDD", "1-001a"),
REGULATOR_SUPPLY("DBVDD", "1-001a"),
@@ -612,7 +611,7 @@
REGULATOR_SUPPLY("DBVDD", "spi0.0"),
};
-static struct regulator_init_data pvdd_1v8 __initdata = {
+static struct regulator_init_data pvdd_1v8 __devinitdata = {
.constraints = {
.name = "PVDD_1V8",
.always_on = 1,
@@ -622,12 +621,12 @@
.num_consumer_supplies = ARRAY_SIZE(pvdd_1v8_consumers),
};
-static struct regulator_consumer_supply pvdd_3v3_consumers[] __initdata = {
+static struct regulator_consumer_supply pvdd_3v3_consumers[] __devinitdata = {
REGULATOR_SUPPLY("MICVDD", "1-001a"),
REGULATOR_SUPPLY("AVDD1", "1-001a"),
};
-static struct regulator_init_data pvdd_3v3 __initdata = {
+static struct regulator_init_data pvdd_3v3 __devinitdata = {
.constraints = {
.name = "PVDD_3V3",
.always_on = 1,
@@ -637,7 +636,7 @@
.num_consumer_supplies = ARRAY_SIZE(pvdd_3v3_consumers),
};
-static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
+static struct wm831x_pdata glenfarclas_pmic_pdata __devinitdata = {
.wm831x_num = 2,
.irq_base = GLENFARCLAS_PMIC_IRQ_BASE,
.gpio_base = GLENFARCLAS_PMIC_GPIO_BASE,
@@ -669,7 +668,7 @@
},
};
-static struct i2c_board_info i2c_devs1[] __initdata = {
+static struct i2c_board_info i2c_devs1[] __devinitdata = {
{ I2C_BOARD_INFO("wm8311", 0x34),
.irq = S3C_EINT(0),
.platform_data = &glenfarclas_pmic_pdata },
@@ -799,7 +798,7 @@
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
samsung_keypad_set_platdata(&crag6410_keypad_data);
- s3c64xx_spi0_set_platdata(&s3c64xx_spi0_pdata, 0, 1);
+ s3c64xx_spi0_set_platdata(NULL, 0, 1);
platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index df3103d..0fe4f15 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -566,7 +566,6 @@
static struct wm831x_pdata smdk6410_wm1192_pdata = {
.pre_init = wm1192_pre_init,
- .irq_base = IRQ_BOARD_START,
.backlight = &wm1192_backlight_pdata,
.dcdc = {
diff --git a/arch/arm/mach-s3c64xx/setup-spi.c b/arch/arm/mach-s3c64xx/setup-spi.c
index d9592ad..4dc5345 100644
--- a/arch/arm/mach-s3c64xx/setup-spi.c
+++ b/arch/arm/mach-s3c64xx/setup-spi.c
@@ -9,19 +9,10 @@
*/
#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
#include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
-struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 13,
- .tx_st_done = 21,
-};
-
-int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+int s3c64xx_spi0_cfg_gpio(void)
{
s3c_gpio_cfgall_range(S3C64XX_GPC(0), 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
@@ -30,13 +21,7 @@
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI1
-struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 13,
- .tx_st_done = 21,
-};
-
-int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+int s3c64xx_spi1_cfg_gpio(void)
{
s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index ee1e8e7..0004455 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -227,13 +227,13 @@
.ctrlbit = (1 << 17),
}, {
.name = "spi",
- .devname = "s3c64xx-spi.0",
+ .devname = "s5p64x0-spi.0",
.parent = &clk_pclk_low.clk,
.enable = s5p64x0_pclk_ctrl,
.ctrlbit = (1 << 21),
}, {
.name = "spi",
- .devname = "s3c64xx-spi.1",
+ .devname = "s5p64x0-spi.1",
.parent = &clk_pclk_low.clk,
.enable = s5p64x0_pclk_ctrl,
.ctrlbit = (1 << 22),
@@ -467,7 +467,7 @@
static struct clksrc_clk clk_sclk_spi0 = {
.clk = {
.name = "sclk_spi",
- .devname = "s3c64xx-spi.0",
+ .devname = "s5p64x0-spi.0",
.ctrlbit = (1 << 20),
.enable = s5p64x0_sclk_ctrl,
},
@@ -479,7 +479,7 @@
static struct clksrc_clk clk_sclk_spi1 = {
.clk = {
.name = "sclk_spi",
- .devname = "s3c64xx-spi.1",
+ .devname = "s5p64x0-spi.1",
.ctrlbit = (1 << 21),
.enable = s5p64x0_sclk_ctrl,
},
@@ -519,8 +519,8 @@
CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
- CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
- CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index dae6a13..f3e0ef3 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -236,13 +236,13 @@
.ctrlbit = (1 << 17),
}, {
.name = "spi",
- .devname = "s3c64xx-spi.0",
+ .devname = "s5p64x0-spi.0",
.parent = &clk_pclk_low.clk,
.enable = s5p64x0_pclk_ctrl,
.ctrlbit = (1 << 21),
}, {
.name = "spi",
- .devname = "s3c64xx-spi.1",
+ .devname = "s5p64x0-spi.1",
.parent = &clk_pclk_low.clk,
.enable = s5p64x0_pclk_ctrl,
.ctrlbit = (1 << 22),
@@ -528,7 +528,7 @@
static struct clksrc_clk clk_sclk_spi0 = {
.clk = {
.name = "sclk_spi",
- .devname = "s3c64xx-spi.0",
+ .devname = "s5p64x0-spi.0",
.ctrlbit = (1 << 20),
.enable = s5p64x0_sclk_ctrl,
},
@@ -540,7 +540,7 @@
static struct clksrc_clk clk_sclk_spi1 = {
.clk = {
.name = "sclk_spi",
- .devname = "s3c64xx-spi.1",
+ .devname = "s5p64x0-spi.1",
.ctrlbit = (1 << 21),
.enable = s5p64x0_sclk_ctrl,
},
@@ -562,8 +562,8 @@
CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
- CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
- CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index 2ee5dc0..9c4ce08 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -36,8 +36,6 @@
#include <plat/devs.h>
#include <plat/irqs.h>
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
static u8 s5p6440_pdma_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,
diff --git a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
deleted file mode 100644
index 170a20a..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SPI_CLKS_H
-#define __ASM_ARCH_SPI_CLKS_H __FILE__
-
-#define S5P64X0_SPI_SRCCLK_PCLK 0
-#define S5P64X0_SPI_SRCCLK_SCLK 1
-
-#endif /* __ASM_ARCH_SPI_CLKS_H */
diff --git a/arch/arm/mach-s5p64x0/setup-spi.c b/arch/arm/mach-s5p64x0/setup-spi.c
index e9b8412..7664356 100644
--- a/arch/arm/mach-s5p64x0/setup-spi.c
+++ b/arch/arm/mach-s5p64x0/setup-spi.c
@@ -9,21 +9,10 @@
*/
#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
#include <plat/gpio-cfg.h>
-#include <plat/cpu.h>
-#include <plat/s3c64xx-spi.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
-struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
- .fifo_lvl_mask = 0x1ff,
- .rx_lvl_offset = 15,
- .tx_st_done = 25,
-};
-
-int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+int s3c64xx_spi0_cfg_gpio(void)
{
if (soc_is_s5p6450())
s3c_gpio_cfgall_range(S5P6450_GPC(0), 3,
@@ -36,13 +25,7 @@
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI1
-struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 15,
- .tx_st_done = 25,
-};
-
-int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+int s3c64xx_spi1_cfg_gpio(void)
{
if (soc_is_s5p6450())
s3c_gpio_cfgall_range(S5P6450_GPC(4), 3,
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index 16eca4e..9262197 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -564,19 +564,19 @@
.ctrlbit = (1 << 5),
}, {
.name = "spi",
- .devname = "s3c64xx-spi.0",
+ .devname = "s5pc100-spi.0",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 6),
}, {
.name = "spi",
- .devname = "s3c64xx-spi.1",
+ .devname = "s5pc100-spi.1",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 7),
}, {
.name = "spi",
- .devname = "s3c64xx-spi.2",
+ .devname = "s5pc100-spi.2",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 8),
@@ -702,7 +702,7 @@
static struct clk clk_48m_spi0 = {
.name = "spi_48m",
- .devname = "s3c64xx-spi.0",
+ .devname = "s5pc100-spi.0",
.parent = &clk_mout_48m.clk,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = (1 << 7),
@@ -710,7 +710,7 @@
static struct clk clk_48m_spi1 = {
.name = "spi_48m",
- .devname = "s3c64xx-spi.1",
+ .devname = "s5pc100-spi.1",
.parent = &clk_mout_48m.clk,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = (1 << 8),
@@ -718,7 +718,7 @@
static struct clk clk_48m_spi2 = {
.name = "spi_48m",
- .devname = "s3c64xx-spi.2",
+ .devname = "s5pc100-spi.2",
.parent = &clk_mout_48m.clk,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = (1 << 9),
@@ -1085,7 +1085,7 @@
static struct clksrc_clk clk_sclk_spi0 = {
.clk = {
.name = "sclk_spi",
- .devname = "s3c64xx-spi.0",
+ .devname = "s5pc100-spi.0",
.ctrlbit = (1 << 4),
.enable = s5pc100_sclk0_ctrl,
},
@@ -1097,7 +1097,7 @@
static struct clksrc_clk clk_sclk_spi1 = {
.clk = {
.name = "sclk_spi",
- .devname = "s3c64xx-spi.1",
+ .devname = "s5pc100-spi.1",
.ctrlbit = (1 << 5),
.enable = s5pc100_sclk0_ctrl,
},
@@ -1109,7 +1109,7 @@
static struct clksrc_clk clk_sclk_spi2 = {
.clk = {
.name = "sclk_spi",
- .devname = "s3c64xx-spi.2",
+ .devname = "s5pc100-spi.2",
.ctrlbit = (1 << 6),
.enable = s5pc100_sclk0_ctrl,
},
@@ -1315,12 +1315,12 @@
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
- CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_48m_spi0),
- CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_sclk_spi0.clk),
- CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_48m_spi1),
- CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_sclk_spi1.clk),
- CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk1", &clk_48m_spi2),
- CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk2", &clk_sclk_spi2.clk),
+ CLKDEV_INIT("s5pc100-spi.0", "spi_busclk1", &clk_48m_spi0),
+ CLKDEV_INIT("s5pc100-spi.0", "spi_busclk2", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s5pc100-spi.1", "spi_busclk1", &clk_48m_spi1),
+ CLKDEV_INIT("s5pc100-spi.1", "spi_busclk2", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("s5pc100-spi.2", "spi_busclk1", &clk_48m_spi2),
+ CLKDEV_INIT("s5pc100-spi.2", "spi_busclk2", &clk_sclk_spi2.clk),
};
void __init s5pc100_register_clocks(void)
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index afd8db2..b1418409 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -33,8 +33,6 @@
#include <mach/irqs.h>
#include <mach/dma.h>
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
static u8 pdma0_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,
diff --git a/arch/arm/mach-s5pc100/include/mach/spi-clocks.h b/arch/arm/mach-s5pc100/include/mach/spi-clocks.h
deleted file mode 100644
index 65e4263..0000000
--- a/arch/arm/mach-s5pc100/include/mach/spi-clocks.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/spi-clocks.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S5PC100_PLAT_SPI_CLKS_H
-#define __S5PC100_PLAT_SPI_CLKS_H __FILE__
-
-#define S5PC100_SPI_SRCCLK_PCLK 0
-#define S5PC100_SPI_SRCCLK_48M 1
-#define S5PC100_SPI_SRCCLK_SPIBUS 2
-
-#endif /* __S5PC100_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s5pc100/setup-spi.c b/arch/arm/mach-s5pc100/setup-spi.c
index 431a6f7..1835679 100644
--- a/arch/arm/mach-s5pc100/setup-spi.c
+++ b/arch/arm/mach-s5pc100/setup-spi.c
@@ -9,20 +9,10 @@
*/
#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
#include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
-struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 13,
- .high_speed = 1,
- .tx_st_done = 21,
-};
-
-int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+int s3c64xx_spi0_cfg_gpio(void)
{
s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
@@ -31,14 +21,7 @@
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI1
-struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 13,
- .high_speed = 1,
- .tx_st_done = 21,
-};
-
-int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+int s3c64xx_spi1_cfg_gpio(void)
{
s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
@@ -47,14 +30,7 @@
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI2
-struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 13,
- .high_speed = 1,
- .tx_st_done = 21,
-};
-
-int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
+int s3c64xx_spi2_cfg_gpio(void)
{
s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 88e983b..77185c3 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -152,6 +152,7 @@
select S3C_DEV_I2C1
select S3C_DEV_I2C2
select S3C_DEV_RTC
+ select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
@@ -170,6 +171,7 @@
select S5PV210_SETUP_IDE
select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
+ select S5PV210_SETUP_USB_PHY
help
Machine support for Samsung SMDKV210
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 09609d5..fcdf52d 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -445,19 +445,19 @@
.ctrlbit = (1 << 11),
}, {
.name = "spi",
- .devname = "s3c64xx-spi.0",
+ .devname = "s5pv210-spi.0",
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<12),
}, {
.name = "spi",
- .devname = "s3c64xx-spi.1",
+ .devname = "s5pv210-spi.1",
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<13),
}, {
.name = "spi",
- .devname = "s3c64xx-spi.2",
+ .devname = "s5pv210-spi.2",
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<14),
@@ -1035,7 +1035,7 @@
static struct clksrc_clk clk_sclk_spi0 = {
.clk = {
.name = "sclk_spi",
- .devname = "s3c64xx-spi.0",
+ .devname = "s5pv210-spi.0",
.enable = s5pv210_clk_mask0_ctrl,
.ctrlbit = (1 << 16),
},
@@ -1047,7 +1047,7 @@
static struct clksrc_clk clk_sclk_spi1 = {
.clk = {
.name = "sclk_spi",
- .devname = "s3c64xx-spi.1",
+ .devname = "s5pv210-spi.1",
.enable = s5pv210_clk_mask0_ctrl,
.ctrlbit = (1 << 17),
},
@@ -1331,8 +1331,8 @@
CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk),
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
- CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
- CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
};
void __init s5pv210_register_clocks(void)
diff --git a/arch/arm/mach-s5pv210/include/mach/spi-clocks.h b/arch/arm/mach-s5pv210/include/mach/spi-clocks.h
deleted file mode 100644
index 02acded..0000000
--- a/arch/arm/mach-s5pv210/include/mach/spi-clocks.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/spi-clocks.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S5PV210_PLAT_SPI_CLKS_H
-#define __S5PV210_PLAT_SPI_CLKS_H __FILE__
-
-#define S5PV210_SPI_SRCCLK_PCLK 0
-#define S5PV210_SPI_SRCCLK_SCLK 1
-
-#endif /* __S5PV210_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index af528f9..78028df 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -600,10 +600,17 @@
s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
};
+/* Audio device */
+static struct platform_device aquila_device_audio = {
+ .name = "smdk-audio",
+ .id = -1,
+};
+
static struct platform_device *aquila_devices[] __initdata = {
&aquila_i2c_gpio_pmic,
&aquila_i2c_gpio5,
&aquila_device_gpiokeys,
+ &aquila_device_audio,
&s3c_device_fb,
&s5p_device_onenand,
&s3c_device_hsmmc0,
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index bf5087c..822a559 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -859,12 +859,19 @@
.num_clients = ARRAY_SIZE(goni_camera_sensors),
};
+/* Audio device */
+static struct platform_device goni_device_audio = {
+ .name = "smdk-audio",
+ .id = -1,
+};
+
static struct platform_device *goni_devices[] __initdata = {
&s3c_device_fb,
&s5p_device_onenand,
&goni_spi_gpio,
&goni_i2c_gpio_pmic,
&goni_i2c_gpio5,
+ &goni_device_audio,
&mmc2_fixed_voltage,
&goni_device_gpiokeys,
&s5p_device_mfc,
@@ -901,7 +908,7 @@
static void __init goni_map_io(void)
{
s5pv210_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
@@ -959,8 +966,6 @@
/* KEYPAD */
samsung_keypad_set_platdata(&keypad_data);
- clk_xusbxti.rate = 24000000;
-
platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
}
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 0d7ddec..918b23d 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -19,6 +19,7 @@
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/pwm_backlight.h>
+#include <linux/platform_data/s3c-hsotg.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
@@ -47,6 +48,7 @@
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
#include <plat/mfc.h>
+#include <plat/clock.h>
#include "common.h"
@@ -203,6 +205,9 @@
.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
};
+/* USB OTG */
+static struct s3c_hsotg_plat smdkv210_hsotg_pdata;
+
static struct platform_device *smdkv210_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_cfcon,
@@ -216,6 +221,7 @@
&s3c_device_i2c2,
&s3c_device_rtc,
&s3c_device_ts,
+ &s3c_device_usb_hsotg,
&s3c_device_wdt,
&s5p_device_fimc0,
&s5p_device_fimc1,
@@ -279,7 +285,7 @@
static void __init smdkv210_map_io(void)
{
s5pv210_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
}
@@ -314,6 +320,8 @@
samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
+ s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata);
+
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}
diff --git a/arch/arm/mach-s5pv210/setup-spi.c b/arch/arm/mach-s5pv210/setup-spi.c
index f43c504..81aecc1 100644
--- a/arch/arm/mach-s5pv210/setup-spi.c
+++ b/arch/arm/mach-s5pv210/setup-spi.c
@@ -9,20 +9,10 @@
*/
#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
#include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
-struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
- .fifo_lvl_mask = 0x1ff,
- .rx_lvl_offset = 15,
- .high_speed = 1,
- .tx_st_done = 25,
-};
-
-int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+int s3c64xx_spi0_cfg_gpio(void)
{
s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP);
@@ -33,14 +23,7 @@
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI1
-struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 15,
- .high_speed = 1,
- .tx_st_done = 25,
-};
-
-int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+int s3c64xx_spi1_cfg_gpio(void)
{
s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP);
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 9e37026..9bd1355 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -779,6 +779,7 @@
.init_irq = r8a7740_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = eva_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = eva_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index 7bc5e7d..6a33cf3 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -80,6 +80,7 @@
.init_irq = emev2_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = kzm9d_add_standard_devices,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = kzm9d_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index d8e33b6..c0ae815 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -455,6 +455,7 @@
.init_irq = sh73a0_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = kzm_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = kzm9g_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index b577f7c..150122a 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1512,6 +1512,9 @@
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
+ /* SDHI0 PORT172 card-detect IRQ26 */
+ gpio_request(GPIO_FN_IRQ26_172, NULL);
+
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
/* enable SDHI1 */
gpio_request(GPIO_FN_SDHICMD1, NULL);
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 472d1f5..3946c4b 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -475,9 +475,9 @@
enum { MSTP001,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
- MSTP219,
+ MSTP219, MSTP218,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
- MSTP331, MSTP329, MSTP325, MSTP323, MSTP318,
+ MSTP331, MSTP329, MSTP325, MSTP323,
MSTP314, MSTP313, MSTP312, MSTP311,
MSTP303, MSTP302, MSTP301, MSTP300,
MSTP411, MSTP410, MSTP403,
@@ -497,6 +497,7 @@
[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
+ [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */
[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
@@ -508,7 +509,6 @@
[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
- [MSTP318] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* SY-DMAC */
[MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */
[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
@@ -552,6 +552,7 @@
CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
+ CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
@@ -563,7 +564,6 @@
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
- CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP318]), /* SY-DMAC */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c
index 550b23d..f04fad4 100644
--- a/arch/arm/mach-shmobile/intc-r8a7779.c
+++ b/arch/arm/mach-shmobile/intc-r8a7779.c
@@ -35,6 +35,9 @@
#define INT2SMSKCR3 0xfe7822ac
#define INT2SMSKCR4 0xfe7822b0
+#define INT2NTSR0 0xfe700060
+#define INT2NTSR1 0xfe700064
+
static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
{
return 0; /* always allow wakeup */
@@ -49,6 +52,10 @@
gic_init(0, 29, gic_dist_base, gic_cpu_base);
gic_arch_extn.irq_set_wake = r8a7779_set_wake;
+ /* route all interrupts to ARM */
+ __raw_writel(0xffffffff, INT2NTSR0);
+ __raw_writel(0x3fffffff, INT2NTSR1);
+
/* unmask all known interrupts in INTCS2 */
__raw_writel(0xfffffff0, INT2SMSKCR0);
__raw_writel(0xfff7ffff, INT2SMSKCR1);
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index bacdd66..fde0d23 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -22,10 +22,20 @@
#include <mach/common.h>
#include <mach/emev2.h>
+#ifdef CONFIG_ARCH_SH73A0
#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
of_machine_is_compatible("renesas,sh73a0"))
+#else
+#define is_sh73a0() (0)
+#endif
+
#define is_r8a7779() machine_is_marzen()
+
+#ifdef CONFIG_ARCH_EMEV2
#define is_emev2() of_machine_is_compatible("renesas,emev2")
+#else
+#define is_emev2() (0)
+#endif
static unsigned int __init shmobile_smp_get_core_count(void)
{
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 6a4bd58..fafce9c 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -484,7 +484,7 @@
},
};
-#define SH7372_CHCLR 0x220
+#define SH7372_CHCLR (0x220 - 0x20)
static const struct sh_dmae_channel sh7372_dmae_channels[] = {
{
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
new file mode 100644
index 0000000..4fb9324
--- /dev/null
+++ b/arch/arm/mach-socfpga/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y := socfpga.o
diff --git a/arch/arm/mach-socfpga/Makefile.boot b/arch/arm/mach-socfpga/Makefile.boot
new file mode 100644
index 0000000..dae9661
--- /dev/null
+++ b/arch/arm/mach-socfpga/Makefile.boot
@@ -0,0 +1 @@
+zreladdr-y := 0x00008000
diff --git a/arch/arm/mach-socfpga/include/mach/debug-macro.S b/arch/arm/mach-socfpga/include/mach/debug-macro.S
new file mode 100644
index 0000000..d6f26d2
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/debug-macro.S
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+ .macro addruart, rp, rv, tmp
+ mov \rp, #DEBUG_LL_UART_OFFSET
+ orr \rp, \rp, #0x00c00000
+ orr \rv, \rp, #0xfe000000 @ virtual base
+ orr \rp, \rp, #0xff000000 @ physical base
+ .endm
+
diff --git a/arch/arm/mach-socfpga/include/mach/timex.h b/arch/arm/mach-socfpga/include/mach/timex.h
new file mode 100644
index 0000000..43df435
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/timex.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define CLOCK_TICK_RATE (50000000 / 16)
diff --git a/arch/arm/mach-socfpga/include/mach/uncompress.h b/arch/arm/mach-socfpga/include/mach/uncompress.h
new file mode 100644
index 0000000..bbe20e6
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/uncompress.h
@@ -0,0 +1,9 @@
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#define putc(c)
+#define flush()
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
new file mode 100644
index 0000000..f01e1eb
--- /dev/null
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2012 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/dw_apb_timer.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+
+extern void socfpga_init_clocks(void);
+
+const static struct of_device_id irq_match[] = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ {}
+};
+
+static void __init gic_init_irq(void)
+{
+ of_irq_init(irq_match);
+}
+
+static void socfpga_cyclone5_restart(char mode, const char *cmd)
+{
+ /* TODO: */
+}
+
+static void __init socfpga_cyclone5_init(void)
+{
+ l2x0_of_init(0, ~0UL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ socfpga_init_clocks();
+}
+
+static const char *altera_dt_match[] = {
+ "altr,socfpga",
+ "altr,socfpga-cyclone5",
+ NULL
+};
+
+DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA")
+ .init_irq = gic_init_irq,
+ .handle_irq = gic_handle_irq,
+ .timer = &dw_apb_timer,
+ .init_machine = socfpga_cyclone5_init,
+ .restart = socfpga_cyclone5_restart,
+ .dt_compat = altera_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-spear13xx/include/mach/debug-macro.S b/arch/arm/mach-spear13xx/include/mach/debug-macro.S
index ea15646..9e3ae6b 100644
--- a/arch/arm/mach-spear13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-spear13xx/include/mach/debug-macro.S
@@ -4,7 +4,7 @@
* Debugging macro include header spear13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear13xx/include/mach/dma.h
index 383ab04..d50bdb6 100644
--- a/arch/arm/mach-spear13xx/include/mach/dma.h
+++ b/arch/arm/mach-spear13xx/include/mach/dma.h
@@ -4,7 +4,7 @@
* DMA information for SPEAr13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h
index 6d8c45b..dac57fd 100644
--- a/arch/arm/mach-spear13xx/include/mach/generic.h
+++ b/arch/arm/mach-spear13xx/include/mach/generic.h
@@ -4,7 +4,7 @@
* spear13xx machine family generic header file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/gpio.h b/arch/arm/mach-spear13xx/include/mach/gpio.h
index cd6f4f8..85f1763 100644
--- a/arch/arm/mach-spear13xx/include/mach/gpio.h
+++ b/arch/arm/mach-spear13xx/include/mach/gpio.h
@@ -4,7 +4,7 @@
* GPIO macros for SPEAr13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h
index f542a24..271a62b 100644
--- a/arch/arm/mach-spear13xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear13xx/include/mach/irqs.h
@@ -4,7 +4,7 @@
* IRQ helper macros for spear13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h
index 30c57ef..65f27de 100644
--- a/arch/arm/mach-spear13xx/include/mach/spear.h
+++ b/arch/arm/mach-spear13xx/include/mach/spear.h
@@ -4,7 +4,7 @@
* spear13xx Machine family specific definition
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/timex.h b/arch/arm/mach-spear13xx/include/mach/timex.h
index 31af3e8..3a58b82 100644
--- a/arch/arm/mach-spear13xx/include/mach/timex.h
+++ b/arch/arm/mach-spear13xx/include/mach/timex.h
@@ -4,7 +4,7 @@
* SPEAr3XX machine family specific timex definitions
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/uncompress.h b/arch/arm/mach-spear13xx/include/mach/uncompress.h
index c784089..70fe72f 100644
--- a/arch/arm/mach-spear13xx/include/mach/uncompress.h
+++ b/arch/arm/mach-spear13xx/include/mach/uncompress.h
@@ -4,7 +4,7 @@
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c
index fefd15b..732d29b 100644
--- a/arch/arm/mach-spear13xx/spear1310.c
+++ b/arch/arm/mach-spear13xx/spear1310.c
@@ -4,7 +4,7 @@
* SPEAr1310 machine source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c
index ee38cbc..81e4ed7 100644
--- a/arch/arm/mach-spear13xx/spear1340.c
+++ b/arch/arm/mach-spear13xx/spear1340.c
@@ -4,7 +4,7 @@
* SPEAr1340 machine source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c
index 50b349a..cf936b1 100644
--- a/arch/arm/mach-spear13xx/spear13xx.c
+++ b/arch/arm/mach-spear13xx/spear13xx.c
@@ -4,7 +4,7 @@
* SPEAr13XX machines common source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/debug-macro.S b/arch/arm/mach-spear3xx/include/mach/debug-macro.S
index 590519f..0a6381f 100644
--- a/arch/arm/mach-spear3xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-spear3xx/include/mach/debug-macro.S
@@ -4,7 +4,7 @@
* Debugging macro include header spear3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index 4a95b94..ce19113 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -4,7 +4,7 @@
* SPEAr3XX machine family generic header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/gpio.h b/arch/arm/mach-spear3xx/include/mach/gpio.h
index 451b208..2ac74c6 100644
--- a/arch/arm/mach-spear3xx/include/mach/gpio.h
+++ b/arch/arm/mach-spear3xx/include/mach/gpio.h
@@ -4,7 +4,7 @@
* GPIO macros for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h
index 51bd62a..803de76 100644
--- a/arch/arm/mach-spear3xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear3xx/include/mach/irqs.h
@@ -4,7 +4,7 @@
* IRQ helper macros for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
index 18e2ac5..6309bf6 100644
--- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
@@ -4,7 +4,7 @@
* Miscellaneous registers definitions for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
index 51eb953..8cca951 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -4,7 +4,7 @@
* SPEAr3xx Machine family specific definition
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/timex.h b/arch/arm/mach-spear3xx/include/mach/timex.h
index a38cc9d..9f5d08b 100644
--- a/arch/arm/mach-spear3xx/include/mach/timex.h
+++ b/arch/arm/mach-spear3xx/include/mach/timex.h
@@ -4,7 +4,7 @@
* SPEAr3XX machine family specific timex definitions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/uncompress.h b/arch/arm/mach-spear3xx/include/mach/uncompress.h
index 53ba8bb..b909b01 100644
--- a/arch/arm/mach-spear3xx/include/mach/uncompress.h
+++ b/arch/arm/mach-spear3xx/include/mach/uncompress.h
@@ -4,7 +4,7 @@
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index f74a05b..0f882ec 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -4,7 +4,7 @@
* SPEAr300 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 84dfb09..bbcf457 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -4,7 +4,7 @@
* SPEAr310 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index a88fa84..88d483b 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -4,7 +4,7 @@
* SPEAr320 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index f22419e..66db5f1 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -4,7 +4,7 @@
* SPEAr3XX machines common source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
@@ -87,7 +87,7 @@
static void __init spear3xx_timer_init(void)
{
- char pclk_name[] = "pll3_48m_clk";
+ char pclk_name[] = "pll3_clk";
struct clk *gpt_clk, *pclk;
spear3xx_clk_init();
diff --git a/arch/arm/mach-spear6xx/include/mach/gpio.h b/arch/arm/mach-spear6xx/include/mach/gpio.h
index 3a789db..d42cefc 100644
--- a/arch/arm/mach-spear6xx/include/mach/gpio.h
+++ b/arch/arm/mach-spear6xx/include/mach/gpio.h
@@ -4,7 +4,7 @@
* GPIO macros for SPEAr6xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
index 179e457..c34acc2 100644
--- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
@@ -4,7 +4,7 @@
* Miscellaneous registers definitions for SPEAr6xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index 2e2e359..9af67d0 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -423,7 +423,7 @@
static void __init spear6xx_timer_init(void)
{
- char pclk_name[] = "pll3_48m_clk";
+ char pclk_name[] = "pll3_clk";
struct clk *gpt_clk, *pclk;
spear6xx_clk_init();
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 6a113a9..9077aaa 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -63,40 +63,15 @@
config MACH_HARMONY
bool "Harmony board"
depends on ARCH_TEGRA_2x_SOC
- select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
help
Support for nVidia Harmony development platform
-config MACH_KAEN
- bool "Kaen board"
- depends on ARCH_TEGRA_2x_SOC
- select MACH_SEABOARD
- select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
- help
- Support for the Kaen version of Seaboard
-
config MACH_PAZ00
bool "Paz00 board"
depends on ARCH_TEGRA_2x_SOC
help
Support for the Toshiba AC100/Dynabook AZ netbook
-config MACH_SEABOARD
- bool "Seaboard board"
- depends on ARCH_TEGRA_2x_SOC
- select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
- help
- Support for nVidia Seaboard development platform. It will
- also be included for some of the derivative boards that
- have large similarities with the seaboard design.
-
-config MACH_TEGRA_DT
- bool "Generic Tegra20 board (FDT support)"
- depends on ARCH_TEGRA_2x_SOC
- select USE_OF
- help
- Support for generic NVIDIA Tegra20 boards using Flattened Device Tree
-
config MACH_TRIMSLICE
bool "TrimSlice board"
depends on ARCH_TEGRA_2x_SOC
@@ -104,20 +79,6 @@
help
Support for CompuLab TrimSlice platform
-config MACH_WARIO
- bool "Wario board"
- depends on ARCH_TEGRA_2x_SOC
- select MACH_SEABOARD
- help
- Support for the Wario version of Seaboard
-
-config MACH_VENTANA
- bool "Ventana board"
- depends on ARCH_TEGRA_2x_SOC
- select MACH_TEGRA_DT
- help
- Support for the nVidia Ventana development platform
-
choice
prompt "Default low-level debug console UART"
default TEGRA_DEBUG_UART_NONE
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 2eb4445..c3d7303 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -8,21 +8,24 @@
obj-y += fuse.o
obj-y += pmc.o
obj-y += flowctrl.o
+obj-y += powergate.o
+obj-y += apbio.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_CPU_IDLE) += sleep.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += powergate.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_SMP) += reset.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o apbio.o
+obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o
obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o
obj-$(CONFIG_TEGRA_PCI) += pcie.o
obj-$(CONFIG_USB_SUPPORT) += usb_phy.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o
+
obj-$(CONFIG_MACH_HARMONY) += board-harmony.o
obj-$(CONFIG_MACH_HARMONY) += board-harmony-pinmux.o
obj-$(CONFIG_MACH_HARMONY) += board-harmony-pcie.o
@@ -31,14 +34,5 @@
obj-$(CONFIG_MACH_PAZ00) += board-paz00.o
obj-$(CONFIG_MACH_PAZ00) += board-paz00-pinmux.o
-obj-$(CONFIG_MACH_SEABOARD) += board-seaboard.o
-obj-$(CONFIG_MACH_SEABOARD) += board-seaboard-pinmux.o
-
-obj-$(CONFIG_MACH_TEGRA_DT) += board-dt-tegra20.o
-obj-$(CONFIG_MACH_TEGRA_DT) += board-harmony-pinmux.o
-obj-$(CONFIG_MACH_TEGRA_DT) += board-seaboard-pinmux.o
-obj-$(CONFIG_MACH_TEGRA_DT) += board-paz00-pinmux.o
-obj-$(CONFIG_MACH_TEGRA_DT) += board-trimslice-pinmux.o
-
obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice.o
obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice-pinmux.o
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
index 9a82094..7a1bb62 100644
--- a/arch/arm/mach-tegra/Makefile.boot
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -2,9 +2,10 @@
params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100
initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000
-dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb
-dtb-$(CONFIG_MACH_PAZ00) += tegra-paz00.dtb
-dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb
-dtb-$(CONFIG_MACH_TRIMSLICE) += tegra-trimslice.dtb
-dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra-cardhu.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb
+dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb
diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c
index e75451e..dc0fe38 100644
--- a/arch/arm/mach-tegra/apbio.c
+++ b/arch/arm/mach-tegra/apbio.c
@@ -15,6 +15,9 @@
#include <linux/kernel.h>
#include <linux/io.h>
+#include <mach/iomap.h>
+#include <linux/of.h>
+#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
@@ -22,17 +25,21 @@
#include <linux/mutex.h>
#include <mach/dma.h>
-#include <mach/iomap.h>
#include "apbio.h"
+#if defined(CONFIG_TEGRA_SYSTEM_DMA) || defined(CONFIG_TEGRA20_APB_DMA)
static DEFINE_MUTEX(tegra_apb_dma_lock);
-
-static struct tegra_dma_channel *tegra_apb_dma;
static u32 *tegra_apb_bb;
static dma_addr_t tegra_apb_bb_phys;
static DECLARE_COMPLETION(tegra_apb_wait);
+static u32 tegra_apb_readl_direct(unsigned long offset);
+static void tegra_apb_writel_direct(u32 value, unsigned long offset);
+
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
+static struct tegra_dma_channel *tegra_apb_dma;
+
bool tegra_apb_init(void)
{
struct tegra_dma_channel *ch;
@@ -72,13 +79,13 @@
complete(&tegra_apb_wait);
}
-u32 tegra_apb_readl(unsigned long offset)
+static u32 tegra_apb_readl_using_dma(unsigned long offset)
{
struct tegra_dma_req req;
int ret;
if (!tegra_apb_dma && !tegra_apb_init())
- return readl(IO_TO_VIRT(offset));
+ return tegra_apb_readl_direct(offset);
mutex_lock(&tegra_apb_dma_lock);
req.complete = apb_dma_complete;
@@ -108,13 +115,13 @@
return *((u32 *)tegra_apb_bb);
}
-void tegra_apb_writel(u32 value, unsigned long offset)
+static void tegra_apb_writel_using_dma(u32 value, unsigned long offset)
{
struct tegra_dma_req req;
int ret;
if (!tegra_apb_dma && !tegra_apb_init()) {
- writel(value, IO_TO_VIRT(offset));
+ tegra_apb_writel_direct(value, offset);
return;
}
@@ -143,3 +150,176 @@
mutex_unlock(&tegra_apb_dma_lock);
}
+
+#else
+static struct dma_chan *tegra_apb_dma_chan;
+static struct dma_slave_config dma_sconfig;
+
+bool tegra_apb_dma_init(void)
+{
+ dma_cap_mask_t mask;
+
+ mutex_lock(&tegra_apb_dma_lock);
+
+ /* Check to see if we raced to setup */
+ if (tegra_apb_dma_chan)
+ goto skip_init;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ tegra_apb_dma_chan = dma_request_channel(mask, NULL, NULL);
+ if (!tegra_apb_dma_chan) {
+ /*
+ * This is common until the device is probed, so don't
+ * shout about it.
+ */
+ pr_debug("%s: can not allocate dma channel\n", __func__);
+ goto err_dma_alloc;
+ }
+
+ tegra_apb_bb = dma_alloc_coherent(NULL, sizeof(u32),
+ &tegra_apb_bb_phys, GFP_KERNEL);
+ if (!tegra_apb_bb) {
+ pr_err("%s: can not allocate bounce buffer\n", __func__);
+ goto err_buff_alloc;
+ }
+
+ dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ dma_sconfig.slave_id = TEGRA_DMA_REQ_SEL_CNTR;
+ dma_sconfig.src_maxburst = 1;
+ dma_sconfig.dst_maxburst = 1;
+
+skip_init:
+ mutex_unlock(&tegra_apb_dma_lock);
+ return true;
+
+err_buff_alloc:
+ dma_release_channel(tegra_apb_dma_chan);
+ tegra_apb_dma_chan = NULL;
+
+err_dma_alloc:
+ mutex_unlock(&tegra_apb_dma_lock);
+ return false;
+}
+
+static void apb_dma_complete(void *args)
+{
+ complete(&tegra_apb_wait);
+}
+
+static int do_dma_transfer(unsigned long apb_add,
+ enum dma_transfer_direction dir)
+{
+ struct dma_async_tx_descriptor *dma_desc;
+ int ret;
+
+ if (dir == DMA_DEV_TO_MEM)
+ dma_sconfig.src_addr = apb_add;
+ else
+ dma_sconfig.dst_addr = apb_add;
+
+ ret = dmaengine_slave_config(tegra_apb_dma_chan, &dma_sconfig);
+ if (ret)
+ return ret;
+
+ dma_desc = dmaengine_prep_slave_single(tegra_apb_dma_chan,
+ tegra_apb_bb_phys, sizeof(u32), dir,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!dma_desc)
+ return -EINVAL;
+
+ dma_desc->callback = apb_dma_complete;
+ dma_desc->callback_param = NULL;
+
+ INIT_COMPLETION(tegra_apb_wait);
+
+ dmaengine_submit(dma_desc);
+ dma_async_issue_pending(tegra_apb_dma_chan);
+ ret = wait_for_completion_timeout(&tegra_apb_wait,
+ msecs_to_jiffies(50));
+
+ if (WARN(ret == 0, "apb read dma timed out")) {
+ dmaengine_terminate_all(tegra_apb_dma_chan);
+ return -EFAULT;
+ }
+ return 0;
+}
+
+static u32 tegra_apb_readl_using_dma(unsigned long offset)
+{
+ int ret;
+
+ if (!tegra_apb_dma_chan && !tegra_apb_dma_init())
+ return tegra_apb_readl_direct(offset);
+
+ mutex_lock(&tegra_apb_dma_lock);
+ ret = do_dma_transfer(offset, DMA_DEV_TO_MEM);
+ if (ret < 0) {
+ pr_err("error in reading offset 0x%08lx using dma\n", offset);
+ *(u32 *)tegra_apb_bb = 0;
+ }
+ mutex_unlock(&tegra_apb_dma_lock);
+ return *((u32 *)tegra_apb_bb);
+}
+
+static void tegra_apb_writel_using_dma(u32 value, unsigned long offset)
+{
+ int ret;
+
+ if (!tegra_apb_dma_chan && !tegra_apb_dma_init()) {
+ tegra_apb_writel_direct(value, offset);
+ return;
+ }
+
+ mutex_lock(&tegra_apb_dma_lock);
+ *((u32 *)tegra_apb_bb) = value;
+ ret = do_dma_transfer(offset, DMA_MEM_TO_DEV);
+ if (ret < 0)
+ pr_err("error in writing offset 0x%08lx using dma\n", offset);
+ mutex_unlock(&tegra_apb_dma_lock);
+}
+#endif
+#else
+#define tegra_apb_readl_using_dma tegra_apb_readl_direct
+#define tegra_apb_writel_using_dma tegra_apb_writel_direct
+#endif
+
+typedef u32 (*apbio_read_fptr)(unsigned long offset);
+typedef void (*apbio_write_fptr)(u32 value, unsigned long offset);
+
+static apbio_read_fptr apbio_read;
+static apbio_write_fptr apbio_write;
+
+static u32 tegra_apb_readl_direct(unsigned long offset)
+{
+ return readl(IO_TO_VIRT(offset));
+}
+
+static void tegra_apb_writel_direct(u32 value, unsigned long offset)
+{
+ writel(value, IO_TO_VIRT(offset));
+}
+
+void tegra_apb_io_init(void)
+{
+ /* Need to use dma only when it is Tegra20 based platform */
+ if (of_machine_is_compatible("nvidia,tegra20") ||
+ !of_have_populated_dt()) {
+ apbio_read = tegra_apb_readl_using_dma;
+ apbio_write = tegra_apb_writel_using_dma;
+ } else {
+ apbio_read = tegra_apb_readl_direct;
+ apbio_write = tegra_apb_writel_direct;
+ }
+}
+
+u32 tegra_apb_readl(unsigned long offset)
+{
+ return apbio_read(offset);
+}
+
+void tegra_apb_writel(u32 value, unsigned long offset)
+{
+ apbio_write(value, offset);
+}
diff --git a/arch/arm/mach-tegra/apbio.h b/arch/arm/mach-tegra/apbio.h
index 8b49e8c..f05d71c 100644
--- a/arch/arm/mach-tegra/apbio.h
+++ b/arch/arm/mach-tegra/apbio.h
@@ -16,24 +16,7 @@
#ifndef __MACH_TEGRA_APBIO_H
#define __MACH_TEGRA_APBIO_H
-#ifdef CONFIG_TEGRA_SYSTEM_DMA
-
+void tegra_apb_io_init(void);
u32 tegra_apb_readl(unsigned long offset);
void tegra_apb_writel(u32 value, unsigned long offset);
-
-#else
-#include <asm/io.h>
-#include <mach/io.h>
-
-static inline u32 tegra_apb_readl(unsigned long offset)
-{
- return readl(IO_TO_VIRT(offset));
-}
-
-static inline void tegra_apb_writel(u32 value, unsigned long offset)
-{
- writel(value, IO_TO_VIRT(offset));
-}
-#endif
-
#endif
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index eb7249d..d0de9c1 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -64,6 +64,7 @@
&tegra_ehci2_pdata),
OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB3_BASE, "tegra-ehci.2",
&tegra_ehci3_pdata),
+ OF_DEV_AUXDATA("nvidia,tegra20-apbdma", 0x6000a000, "tegra-apbdma", NULL),
{}
};
@@ -81,11 +82,6 @@
{ NULL, NULL, 0, 0},
};
-static struct of_device_id tegra_dt_match_table[] __initdata = {
- { .compatible = "simple-bus", },
- {}
-};
-
static void __init tegra_dt_init(void)
{
tegra_clk_init_from_table(tegra_dt_clk_init_table);
@@ -94,10 +90,74 @@
* Finished with the static registrations now; fill in the missing
* devices
*/
- of_platform_populate(NULL, tegra_dt_match_table,
+ of_platform_populate(NULL, of_default_bus_match_table,
tegra20_auxdata_lookup, NULL);
}
+#ifdef CONFIG_MACH_TRIMSLICE
+static void __init trimslice_init(void)
+{
+ int ret;
+
+ ret = tegra_pcie_init(true, true);
+ if (ret)
+ pr_err("tegra_pci_init() failed: %d\n", ret);
+}
+#endif
+
+#ifdef CONFIG_MACH_HARMONY
+static void __init harmony_init(void)
+{
+ int ret;
+
+ ret = harmony_regulator_init();
+ if (ret) {
+ pr_err("harmony_regulator_init() failed: %d\n", ret);
+ return;
+ }
+
+ ret = harmony_pcie_init();
+ if (ret)
+ pr_err("harmony_pcie_init() failed: %d\n", ret);
+}
+#endif
+
+#ifdef CONFIG_MACH_PAZ00
+static void __init paz00_init(void)
+{
+ tegra_paz00_wifikill_init();
+}
+#endif
+
+static struct {
+ char *machine;
+ void (*init)(void);
+} board_init_funcs[] = {
+#ifdef CONFIG_MACH_TRIMSLICE
+ { "compulab,trimslice", trimslice_init },
+#endif
+#ifdef CONFIG_MACH_HARMONY
+ { "nvidia,harmony", harmony_init },
+#endif
+#ifdef CONFIG_MACH_PAZ00
+ { "compal,paz00", paz00_init },
+#endif
+};
+
+static void __init tegra_dt_init_late(void)
+{
+ int i;
+
+ tegra_init_late();
+
+ for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) {
+ if (of_machine_is_compatible(board_init_funcs[i].machine)) {
+ board_init_funcs[i].init();
+ break;
+ }
+ }
+}
+
static const char *tegra20_dt_board_compat[] = {
"nvidia,tegra20",
NULL
@@ -110,7 +170,7 @@
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_dt_init,
- .init_late = tegra_init_late,
+ .init_late = tegra_dt_init_late,
.restart = tegra_assert_system_reset,
.dt_compat = tegra20_dt_board_compat,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index 4f76fa7..ee48214 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -36,11 +36,6 @@
#include "board.h"
#include "clock.h"
-static struct of_device_id tegra_dt_match_table[] __initdata = {
- { .compatible = "simple-bus", },
- {}
-};
-
struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000200, "sdhci-tegra.1", NULL),
@@ -52,6 +47,7 @@
OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C700, "tegra-i2c.3", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL),
OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra30-apbdma", 0x6000a000, "tegra-apbdma", NULL),
{}
};
@@ -74,7 +70,7 @@
{
tegra_clk_init_from_table(tegra_dt_clk_init_table);
- of_platform_populate(NULL, tegra_dt_match_table,
+ of_platform_populate(NULL, of_default_bus_match_table,
tegra30_auxdata_lookup, NULL);
}
diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c
index 33c4fed..e8c3fda 100644
--- a/arch/arm/mach-tegra/board-harmony-pcie.c
+++ b/arch/arm/mach-tegra/board-harmony-pcie.c
@@ -27,14 +27,11 @@
#ifdef CONFIG_TEGRA_PCI
-static int __init harmony_pcie_init(void)
+int __init harmony_pcie_init(void)
{
struct regulator *regulator = NULL;
int err;
- if (!machine_is_harmony())
- return 0;
-
err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05");
if (err)
return err;
@@ -62,7 +59,15 @@
return err;
}
+static int __init harmony_pcie_initcall(void)
+{
+ if (!machine_is_harmony())
+ return 0;
+
+ return harmony_pcie_init();
+}
+
/* PCI should be initialized after I2C, mfd and regulators */
-subsys_initcall_sync(harmony_pcie_init);
+subsys_initcall_sync(harmony_pcie_initcall);
#endif
diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c
index 82f32300..44dcb2e 100644
--- a/arch/arm/mach-tegra/board-harmony-power.c
+++ b/arch/arm/mach-tegra/board-harmony-power.c
@@ -20,6 +20,10 @@
#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/tps6586x.h>
+#include <linux/of.h>
+#include <linux/of_i2c.h>
+
+#include <asm/mach-types.h>
#include <mach/irqs.h>
@@ -110,7 +114,26 @@
int __init harmony_regulator_init(void)
{
- i2c_register_board_info(3, harmony_regulators, 1);
+ if (machine_is_harmony()) {
+ i2c_register_board_info(3, harmony_regulators, 1);
+ } else { /* Harmony, booted using device tree */
+ struct device_node *np;
+ struct i2c_adapter *adapter;
+
+ np = of_find_node_by_path("/i2c@7000d000");
+ if (np == NULL) {
+ pr_err("Could not find device_node for DVC I2C\n");
+ return -ENODEV;
+ }
+
+ adapter = of_find_i2c_adapter_by_node(np);
+ if (!adapter) {
+ pr_err("Could not find i2c_adapter for DVC I2C\n");
+ return -ENODEV;
+ }
+
+ i2c_new_device(adapter, harmony_regulators);
+ }
return 0;
}
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index bbc1907..4b64af5 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -148,7 +148,6 @@
&debug_uart,
&tegra_sdhci_device4,
&tegra_sdhci_device1,
- &wifi_rfkill_device,
&leds_gpio,
&gpio_keys_device,
};
@@ -201,6 +200,11 @@
.is_8bit = 1,
};
+void __init tegra_paz00_wifikill_init(void)
+{
+ platform_device_register(&wifi_rfkill_device);
+}
+
static void __init tegra_paz00_init(void)
{
tegra_clk_init_from_table(paz00_clk_init_table);
@@ -211,6 +215,7 @@
tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices));
+ tegra_paz00_wifikill_init();
paz00_i2c_init();
paz00_usb_init();
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
deleted file mode 100644
index 11fc8a5..0000000
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * Copyright (C) 2010-2012 NVIDIA Corporation
- * Copyright (C) 2011 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-
-#include "board-seaboard.h"
-#include "board-pinmux.h"
-
-static unsigned long seaboard_pincfg_drive_sdio1[] = {
- TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE, 0),
- TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SCHMITT, 0),
- TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_LOW_POWER_MODE, 3),
- TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH, 31),
- TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH, 31),
- TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING, 3),
- TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SLEW_RATE_RISING, 3),
-};
-
-static struct pinctrl_map common_map[] = {
- TEGRA_MAP_MUXCONF("ata", "ide", none, driven),
- TEGRA_MAP_MUXCONF("atb", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("atc", "nand", none, driven),
- TEGRA_MAP_MUXCONF("atd", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("ate", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("cdev1", "plla_out", none, driven),
- TEGRA_MAP_MUXCONF("cdev2", "pllp_out4", none, driven),
- TEGRA_MAP_MUXCONF("crtp", "crt", up, tristate),
- TEGRA_MAP_MUXCONF("csus", "vi_sensor_clk", none, tristate),
- TEGRA_MAP_MUXCONF("dap1", "dap1", none, driven),
- TEGRA_MAP_MUXCONF("dap2", "dap2", none, driven),
- TEGRA_MAP_MUXCONF("dap3", "dap3", none, tristate),
- TEGRA_MAP_MUXCONF("dap4", "dap4", none, driven),
- TEGRA_MAP_MUXCONF("dta", "vi", down, driven),
- TEGRA_MAP_MUXCONF("dtb", "vi", down, driven),
- TEGRA_MAP_MUXCONF("dtc", "vi", down, driven),
- TEGRA_MAP_MUXCONF("dtd", "vi", down, driven),
- TEGRA_MAP_MUXCONF("dte", "vi", down, tristate),
- TEGRA_MAP_MUXCONF("dtf", "i2c3", none, driven),
- TEGRA_MAP_MUXCONF("gma", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("gmb", "gmi", up, tristate),
- TEGRA_MAP_MUXCONF("gmc", "uartd", none, driven),
- TEGRA_MAP_MUXCONF("gme", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("gpu", "pwm", none, driven),
- TEGRA_MAP_MUXCONF("gpu7", "rtck", none, driven),
- TEGRA_MAP_MUXCONF("gpv", "pcie", none, tristate),
- TEGRA_MAP_MUXCONF("hdint", "hdmi", na, tristate),
- TEGRA_MAP_MUXCONF("i2cp", "i2cp", none, driven),
- TEGRA_MAP_MUXCONF("irrx", "uartb", none, driven),
- TEGRA_MAP_MUXCONF("irtx", "uartb", none, driven),
- TEGRA_MAP_MUXCONF("kbca", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcb", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcc", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcd", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbce", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcf", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("lcsn", "rsvd4", na, tristate),
- TEGRA_MAP_MUXCONF("ld0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld10", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld11", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld12", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld13", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld14", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld15", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld16", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld17", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld3", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld4", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld5", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld6", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld7", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld8", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld9", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ldc", "rsvd4", na, tristate),
- TEGRA_MAP_MUXCONF("ldi", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhs", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lm0", "rsvd4", na, driven),
- TEGRA_MAP_MUXCONF("lm1", "crt", na, tristate),
- TEGRA_MAP_MUXCONF("lpp", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lpw1", "rsvd4", na, tristate),
- TEGRA_MAP_MUXCONF("lsc0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lsdi", "rsvd4", na, tristate),
- TEGRA_MAP_MUXCONF("lspi", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lvp0", "rsvd4", na, tristate),
- TEGRA_MAP_MUXCONF("lvp1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lvs", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("owc", "rsvd2", none, tristate),
- TEGRA_MAP_MUXCONF("pmc", "pwr_on", na, driven),
- TEGRA_MAP_MUXCONF("pta", "hdmi", none, driven),
- TEGRA_MAP_MUXCONF("rm", "i2c1", none, driven),
- TEGRA_MAP_MUXCONF("sdb", "sdio3", na, driven),
- TEGRA_MAP_MUXCONF("sdc", "sdio3", none, driven),
- TEGRA_MAP_MUXCONF("sdd", "sdio3", none, driven),
- TEGRA_MAP_MUXCONF("sdio1", "sdio1", up, driven),
- TEGRA_MAP_MUXCONF("slxa", "pcie", up, tristate),
- TEGRA_MAP_MUXCONF("slxd", "spdif", none, driven),
- TEGRA_MAP_MUXCONF("slxk", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("spdi", "rsvd2", none, driven),
- TEGRA_MAP_MUXCONF("spdo", "rsvd2", none, driven),
- TEGRA_MAP_MUXCONF("spib", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("spid", "spi1", none, tristate),
- TEGRA_MAP_MUXCONF("spie", "spi1", none, tristate),
- TEGRA_MAP_MUXCONF("spif", "spi1", down, tristate),
- TEGRA_MAP_MUXCONF("spih", "spi2_alt", up, tristate),
- TEGRA_MAP_MUXCONF("uaa", "ulpi", up, driven),
- TEGRA_MAP_MUXCONF("uab", "ulpi", up, driven),
- TEGRA_MAP_MUXCONF("uac", "rsvd2", none, driven),
- TEGRA_MAP_MUXCONF("uad", "irda", none, driven),
- TEGRA_MAP_MUXCONF("uca", "uartc", none, driven),
- TEGRA_MAP_MUXCONF("ucb", "uartc", none, driven),
- TEGRA_MAP_MUXCONF("uda", "ulpi", none, driven),
- TEGRA_MAP_CONF("ck32", none, na),
- TEGRA_MAP_CONF("ddrc", none, na),
- TEGRA_MAP_CONF("pmca", none, na),
- TEGRA_MAP_CONF("pmcb", none, na),
- TEGRA_MAP_CONF("pmcc", none, na),
- TEGRA_MAP_CONF("pmcd", none, na),
- TEGRA_MAP_CONF("pmce", none, na),
- TEGRA_MAP_CONF("xm2c", none, na),
- TEGRA_MAP_CONF("xm2d", none, na),
- TEGRA_MAP_CONF("ls", up, na),
- TEGRA_MAP_CONF("lc", up, na),
- TEGRA_MAP_CONF("ld17_0", down, na),
- TEGRA_MAP_CONF("ld19_18", down, na),
- TEGRA_MAP_CONF("ld21_20", down, na),
- TEGRA_MAP_CONF("ld23_22", down, na),
-};
-
-static struct pinctrl_map seaboard_map[] = {
- TEGRA_MAP_MUXCONF("ddc", "rsvd2", none, tristate),
- TEGRA_MAP_MUXCONF("gmd", "sflash", none, driven),
- TEGRA_MAP_MUXCONF("lpw0", "hdmi", na, driven),
- TEGRA_MAP_MUXCONF("lpw2", "hdmi", na, driven),
- TEGRA_MAP_MUXCONF("lsc1", "hdmi", na, tristate),
- TEGRA_MAP_MUXCONF("lsck", "hdmi", na, tristate),
- TEGRA_MAP_MUXCONF("lsda", "hdmi", na, tristate),
- TEGRA_MAP_MUXCONF("slxc", "spdif", none, tristate),
- TEGRA_MAP_MUXCONF("spia", "gmi", up, tristate),
- TEGRA_MAP_MUXCONF("spic", "gmi", up, driven),
- TEGRA_MAP_MUXCONF("spig", "spi2_alt", up, tristate),
- PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(PINMUX_DEV, "drive_sdio1", seaboard_pincfg_drive_sdio1),
-};
-
-static struct pinctrl_map ventana_map[] = {
- TEGRA_MAP_MUXCONF("ddc", "rsvd2", none, driven),
- TEGRA_MAP_MUXCONF("gmd", "sflash", none, tristate),
- TEGRA_MAP_MUXCONF("lpw0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lpw2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lsc1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lsck", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsda", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("slxc", "sdio3", none, driven),
- TEGRA_MAP_MUXCONF("spia", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("spic", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("spig", "spi2_alt", none, tristate),
-};
-
-static struct tegra_board_pinmux_conf common_conf = {
- .maps = common_map,
- .map_count = ARRAY_SIZE(common_map),
-};
-
-static struct tegra_board_pinmux_conf seaboard_conf = {
- .maps = seaboard_map,
- .map_count = ARRAY_SIZE(seaboard_map),
-};
-
-static struct tegra_board_pinmux_conf ventana_conf = {
- .maps = ventana_map,
- .map_count = ARRAY_SIZE(ventana_map),
-};
-
-void seaboard_pinmux_init(void)
-{
- tegra_board_pinmux_init(&common_conf, &seaboard_conf);
-}
-
-void ventana_pinmux_init(void)
-{
- tegra_board_pinmux_init(&common_conf, &ventana_conf);
-}
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
deleted file mode 100644
index 71e9f3f..0000000
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Copyright (c) 2010, 2011 NVIDIA Corporation.
- * Copyright (C) 2010, 2011 Google, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/of_serial.h>
-#include <linux/i2c.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/platform_data/tegra_usb.h>
-
-#include <sound/wm8903.h>
-
-#include <mach/iomap.h>
-#include <mach/irqs.h>
-#include <mach/sdhci.h>
-#include <mach/tegra_wm8903_pdata.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-
-#include "board.h"
-#include "board-seaboard.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
- {
- /* Memory and IRQ filled in before registration */
- .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
- .type = PORT_TEGRA,
- .handle_break = tegra_serial_handle_break,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = 216000000,
- }, {
- .flags = 0,
- }
-};
-
-static struct platform_device debug_uart = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = debug_uart_platform_data,
- },
-};
-
-static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = {
- /* name parent rate enabled */
- { "uartb", "pll_p", 216000000, true},
- { "uartd", "pll_p", 216000000, true},
- { "pll_a", "pll_p_out1", 56448000, true },
- { "pll_a_out0", "pll_a", 11289600, true },
- { "cdev1", NULL, 0, true },
- { "i2s1", "pll_a_out0", 11289600, false},
- { "usbd", "clk_m", 12000000, true},
- { "usb3", "clk_m", 12000000, true},
- { NULL, NULL, 0, 0},
-};
-
-static struct gpio_keys_button seaboard_gpio_keys_buttons[] = {
- {
- .code = SW_LID,
- .gpio = TEGRA_GPIO_LIDSWITCH,
- .active_low = 0,
- .desc = "Lid",
- .type = EV_SW,
- .wakeup = 1,
- .debounce_interval = 1,
- },
- {
- .code = KEY_POWER,
- .gpio = TEGRA_GPIO_POWERKEY,
- .active_low = 1,
- .desc = "Power",
- .type = EV_KEY,
- .wakeup = 1,
- },
-};
-
-static struct gpio_keys_platform_data seaboard_gpio_keys = {
- .buttons = seaboard_gpio_keys_buttons,
- .nbuttons = ARRAY_SIZE(seaboard_gpio_keys_buttons),
-};
-
-static struct platform_device seaboard_gpio_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &seaboard_gpio_keys,
- }
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
- .cd_gpio = -1,
- .wp_gpio = -1,
- .power_gpio = -1,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata3 = {
- .cd_gpio = TEGRA_GPIO_SD2_CD,
- .wp_gpio = TEGRA_GPIO_SD2_WP,
- .power_gpio = TEGRA_GPIO_SD2_POWER,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
- .cd_gpio = -1,
- .wp_gpio = -1,
- .power_gpio = -1,
- .is_8bit = 1,
-};
-
-static struct tegra_wm8903_platform_data seaboard_audio_pdata = {
- .gpio_spkr_en = TEGRA_GPIO_SPKR_EN,
- .gpio_hp_det = TEGRA_GPIO_HP_DET,
- .gpio_hp_mute = -1,
- .gpio_int_mic_en = -1,
- .gpio_ext_mic_en = -1,
-};
-
-static struct platform_device seaboard_audio_device = {
- .name = "tegra-snd-wm8903",
- .id = 0,
- .dev = {
- .platform_data = &seaboard_audio_pdata,
- },
-};
-
-static struct platform_device *seaboard_devices[] __initdata = {
- &debug_uart,
- &tegra_pmu_device,
- &tegra_sdhci_device4,
- &tegra_sdhci_device3,
- &tegra_sdhci_device1,
- &seaboard_gpio_keys_device,
- &tegra_i2s_device1,
- &tegra_das_device,
- &seaboard_audio_device,
-};
-
-static struct i2c_board_info __initdata isl29018_device = {
- I2C_BOARD_INFO("isl29018", 0x44),
-};
-
-static struct i2c_board_info __initdata adt7461_device = {
- I2C_BOARD_INFO("adt7461", 0x4c),
-};
-
-static struct wm8903_platform_data wm8903_pdata = {
- .irq_active_low = 0,
- .micdet_cfg = 0,
- .micdet_delay = 100,
- .gpio_base = SEABOARD_GPIO_WM8903(0),
- .gpio_cfg = {
- 0,
- 0,
- WM8903_GPIO_CONFIG_ZERO,
- 0,
- 0,
- },
-};
-
-static struct i2c_board_info __initdata wm8903_device = {
- I2C_BOARD_INFO("wm8903", 0x1a),
- .platform_data = &wm8903_pdata,
-};
-
-static int seaboard_ehci_init(void)
-{
- struct tegra_ehci_platform_data *pdata;
-
- pdata = tegra_ehci1_device.dev.platform_data;
- pdata->vbus_gpio = TEGRA_GPIO_USB1;
-
- platform_device_register(&tegra_ehci1_device);
- platform_device_register(&tegra_ehci3_device);
-
- return 0;
-}
-
-static void __init seaboard_i2c_init(void)
-{
- isl29018_device.irq = gpio_to_irq(TEGRA_GPIO_ISL29018_IRQ);
- i2c_register_board_info(0, &isl29018_device, 1);
-
- wm8903_device.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ);
- i2c_register_board_info(0, &wm8903_device, 1);
-
- i2c_register_board_info(3, &adt7461_device, 1);
-
- platform_device_register(&tegra_i2c_device1);
- platform_device_register(&tegra_i2c_device2);
- platform_device_register(&tegra_i2c_device3);
- platform_device_register(&tegra_i2c_device4);
-}
-
-static void __init seaboard_common_init(void)
-{
- seaboard_pinmux_init();
-
- tegra_clk_init_from_table(seaboard_clk_init_table);
-
- tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
- tegra_sdhci_device3.dev.platform_data = &sdhci_pdata3;
- tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
- platform_add_devices(seaboard_devices, ARRAY_SIZE(seaboard_devices));
-
- seaboard_ehci_init();
-}
-
-static void __init tegra_seaboard_init(void)
-{
- /* Seaboard uses UARTD for the debug port. */
- debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTD_BASE);
- debug_uart_platform_data[0].mapbase = TEGRA_UARTD_BASE;
- debug_uart_platform_data[0].irq = INT_UARTD;
-
- seaboard_common_init();
-
- seaboard_i2c_init();
-}
-
-static void __init tegra_kaen_init(void)
-{
- /* Kaen uses UARTB for the debug port. */
- debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE);
- debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
- debug_uart_platform_data[0].irq = INT_UARTB;
-
- seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
-
- seaboard_common_init();
-
- seaboard_i2c_init();
-}
-
-static void __init tegra_wario_init(void)
-{
- /* Wario uses UARTB for the debug port. */
- debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE);
- debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
- debug_uart_platform_data[0].irq = INT_UARTB;
-
- seaboard_common_init();
-
- seaboard_i2c_init();
-}
-
-
-MACHINE_START(SEABOARD, "seaboard")
- .atag_offset = 0x100,
- .map_io = tegra_map_common_io,
- .init_early = tegra20_init_early,
- .init_irq = tegra_init_irq,
- .handle_irq = gic_handle_irq,
- .timer = &tegra_timer,
- .init_machine = tegra_seaboard_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
-MACHINE_END
-
-MACHINE_START(KAEN, "kaen")
- .atag_offset = 0x100,
- .map_io = tegra_map_common_io,
- .init_early = tegra20_init_early,
- .init_irq = tegra_init_irq,
- .handle_irq = gic_handle_irq,
- .timer = &tegra_timer,
- .init_machine = tegra_kaen_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
-MACHINE_END
-
-MACHINE_START(WARIO, "wario")
- .atag_offset = 0x100,
- .map_io = tegra_map_common_io,
- .init_early = tegra20_init_early,
- .init_irq = tegra_init_irq,
- .handle_irq = gic_handle_irq,
- .timer = &tegra_timer,
- .init_machine = tegra_wario_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
-MACHINE_END
diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h
deleted file mode 100644
index 4c45d4c..0000000
--- a/arch/arm/mach-tegra/board-seaboard.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-seaboard.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_BOARD_SEABOARD_H
-#define _MACH_TEGRA_BOARD_SEABOARD_H
-
-#include <mach/gpio-tegra.h>
-
-#define SEABOARD_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_))
-#define SEABOARD_GPIO_WM8903(_x_) (SEABOARD_GPIO_TPS6586X(4) + (_x_))
-
-#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5
-#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6
-#define TEGRA_GPIO_LIDSWITCH TEGRA_GPIO_PC7
-#define TEGRA_GPIO_USB1 TEGRA_GPIO_PD0
-#define TEGRA_GPIO_POWERKEY TEGRA_GPIO_PV2
-#define TEGRA_GPIO_BACKLIGHT TEGRA_GPIO_PD4
-#define TEGRA_GPIO_LVDS_SHUTDOWN TEGRA_GPIO_PB2
-#define TEGRA_GPIO_BACKLIGHT_PWM TEGRA_GPIO_PU5
-#define TEGRA_GPIO_BACKLIGHT_VDD TEGRA_GPIO_PW0
-#define TEGRA_GPIO_EN_VDD_PNL TEGRA_GPIO_PC6
-#define TEGRA_GPIO_MAGNETOMETER TEGRA_GPIO_PN5
-#define TEGRA_GPIO_ISL29018_IRQ TEGRA_GPIO_PZ2
-#define TEGRA_GPIO_AC_ONLINE TEGRA_GPIO_PV3
-#define TEGRA_GPIO_WWAN_PWR SEABOARD_GPIO_TPS6586X(2)
-#define TEGRA_GPIO_CDC_IRQ TEGRA_GPIO_PX3
-#define TEGRA_GPIO_SPKR_EN SEABOARD_GPIO_WM8903(2)
-#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PX1
-#define TEGRA_GPIO_KAEN_HP_MUTE TEGRA_GPIO_PA5
-
-void seaboard_pinmux_init(void);
-
-#endif
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index 6501496..f88e514 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -46,5 +46,14 @@
static inline int tegra_powergate_debugfs_init(void) { return 0; }
#endif
+int __init harmony_regulator_init(void);
+#ifdef CONFIG_TEGRA_PCI
+int __init harmony_pcie_init(void);
+#else
+static inline int harmony_pcie_init(void) { return 0; }
+#endif
+
+void __init tegra_paz00_wifikill_init(void);
+
extern struct sys_timer tegra_timer;
#endif
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 204a5c8..96fef6b 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -33,6 +33,7 @@
#include "clock.h"
#include "fuse.h"
#include "pmc.h"
+#include "apbio.h"
/*
* Storage for debug-macro.S's state.
@@ -127,6 +128,7 @@
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
void __init tegra20_init_early(void)
{
+ tegra_apb_io_init();
tegra_init_fuse();
tegra2_init_clocks();
tegra_clk_init_from_table(tegra20_clk_init_table);
@@ -138,6 +140,7 @@
#ifdef CONFIG_ARCH_TEGRA_3x_SOC
void __init tegra30_init_early(void)
{
+ tegra_apb_io_init();
tegra_init_fuse();
tegra30_init_clocks();
tegra_clk_init_from_table(tegra30_clk_init_table);
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c
index 7a065f0..ceb52db 100644
--- a/arch/arm/mach-tegra/cpu-tegra.c
+++ b/arch/arm/mach-tegra/cpu-tegra.c
@@ -189,8 +189,8 @@
return PTR_ERR(emc_clk);
}
- clk_enable(emc_clk);
- clk_enable(cpu_clk);
+ clk_prepare_enable(emc_clk);
+ clk_prepare_enable(cpu_clk);
cpufreq_frequency_table_cpuinfo(policy, freq_table);
cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
@@ -212,7 +212,7 @@
static int tegra_cpu_exit(struct cpufreq_policy *policy)
{
cpufreq_frequency_table_cpuinfo(policy, freq_table);
- clk_disable(emc_clk);
+ clk_disable_unprepare(emc_clk);
clk_put(emc_clk);
clk_put(cpu_clk);
return 0;
diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c
index d83a8c0..566e2f8 100644
--- a/arch/arm/mach-tegra/cpuidle.c
+++ b/arch/arm/mach-tegra/cpuidle.c
@@ -27,9 +27,9 @@
#include <linux/cpuidle.h>
#include <linux/hrtimer.h>
-#include <mach/iomap.h>
+#include <asm/proc-fns.h>
-extern void tegra_cpu_wfi(void);
+#include <mach/iomap.h>
static int tegra_idle_enter_lp3(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index);
@@ -64,7 +64,7 @@
enter = ktime_get();
- tegra_cpu_wfi();
+ cpu_do_idle();
exit = ktime_sub(ktime_get(), enter);
us = ktime_to_us(exit);
diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c
index abea4f6..29c5114 100644
--- a/arch/arm/mach-tegra/dma.c
+++ b/arch/arm/mach-tegra/dma.c
@@ -714,13 +714,13 @@
bitmap_fill(channel_usage, NV_DMA_MAX_CHANNELS);
- c = clk_get_sys("tegra-dma", NULL);
+ c = clk_get_sys("tegra-apbdma", NULL);
if (IS_ERR(c)) {
pr_err("Unable to get clock for APB DMA\n");
ret = PTR_ERR(c);
goto fail;
}
- ret = clk_enable(c);
+ ret = clk_prepare_enable(c);
if (ret != 0) {
pr_err("Unable to enable clock for APB DMA\n");
goto fail;
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
index 0e09137..d3ad515 100644
--- a/arch/arm/mach-tegra/pcie.c
+++ b/arch/arm/mach-tegra/pcie.c
@@ -723,9 +723,9 @@
tegra_pcie_xclk_clamp(false);
- clk_enable(tegra_pcie.afi_clk);
- clk_enable(tegra_pcie.pex_clk);
- return clk_enable(tegra_pcie.pll_e);
+ clk_prepare_enable(tegra_pcie.afi_clk);
+ clk_prepare_enable(tegra_pcie.pex_clk);
+ return clk_prepare_enable(tegra_pcie.pll_e);
}
static int tegra_pcie_clocks_get(void)
diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c
index f5b12fb..15d5065 100644
--- a/arch/arm/mach-tegra/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
@@ -146,7 +146,7 @@
if (ret)
goto err_power;
- ret = clk_enable(clk);
+ ret = clk_prepare_enable(clk);
if (ret)
goto err_clk;
@@ -162,7 +162,7 @@
return 0;
err_clamp:
- clk_disable(clk);
+ clk_disable_unprepare(clk);
err_clk:
tegra_powergate_power_off(id);
err_power:
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index 4d6a2ee..5beb7eb 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -33,7 +33,7 @@
static bool is_enabled;
-static void tegra_cpu_reset_handler_enable(void)
+static void __init tegra_cpu_reset_handler_enable(void)
{
void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE);
void __iomem *evp_cpu_reset =
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
index 5b20197..d29b156 100644
--- a/arch/arm/mach-tegra/sleep.S
+++ b/arch/arm/mach-tegra/sleep.S
@@ -62,32 +62,3 @@
movw \reg, #:lower16:\val
movt \reg, #:upper16:\val
.endm
-
-/*
- * tegra_cpu_wfi
- *
- * puts current CPU in clock-gated wfi using the flow controller
- *
- * corrupts r0-r3
- * must be called with MMU on
- */
-
-ENTRY(tegra_cpu_wfi)
- cpu_id r0
- cpu_to_halt_reg r1, r0
- cpu_to_csr_reg r2, r0
- mov32 r0, TEGRA_FLOW_CTRL_VIRT
- mov r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
- str r3, [r0, r2] @ clear event & interrupt status
- mov r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT | FLOW_CTRL_JTAG_RESUME
- str r3, [r0, r1] @ put flow controller in wait irq mode
- dsb
- wfi
- mov r3, #0
- str r3, [r0, r1] @ clear flow controller halt status
- mov r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
- str r3, [r0, r2] @ clear event & interrupt status
- dsb
- mov pc, lr
-ENDPROC(tegra_cpu_wfi)
-
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index b59315c..a703844 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -69,6 +69,8 @@
#define PERIPH_CLK_SOURCE_MASK (3<<30)
#define PERIPH_CLK_SOURCE_SHIFT 30
+#define PERIPH_CLK_SOURCE_PWM_MASK (7<<28)
+#define PERIPH_CLK_SOURCE_PWM_SHIFT 28
#define PERIPH_CLK_SOURCE_ENABLE (1<<28)
#define PERIPH_CLK_SOURCE_DIVU71_MASK 0xFF
#define PERIPH_CLK_SOURCE_DIVU16_MASK 0xFFFF
@@ -908,9 +910,20 @@
u32 val = clk_readl(c->reg);
const struct clk_mux_sel *mux = NULL;
const struct clk_mux_sel *sel;
+ u32 shift;
+ u32 mask;
+
+ if (c->flags & MUX_PWM) {
+ shift = PERIPH_CLK_SOURCE_PWM_SHIFT;
+ mask = PERIPH_CLK_SOURCE_PWM_MASK;
+ } else {
+ shift = PERIPH_CLK_SOURCE_SHIFT;
+ mask = PERIPH_CLK_SOURCE_MASK;
+ }
+
if (c->flags & MUX) {
for (sel = c->inputs; sel->input != NULL; sel++) {
- if (val >> PERIPH_CLK_SOURCE_SHIFT == sel->value)
+ if ((val & mask) >> shift == sel->value)
mux = sel;
}
BUG_ON(!mux);
@@ -1023,12 +1036,23 @@
{
u32 val;
const struct clk_mux_sel *sel;
+ u32 mask, shift;
+
pr_debug("%s: %s %s\n", __func__, c->name, p->name);
+
+ if (c->flags & MUX_PWM) {
+ shift = PERIPH_CLK_SOURCE_PWM_SHIFT;
+ mask = PERIPH_CLK_SOURCE_PWM_MASK;
+ } else {
+ shift = PERIPH_CLK_SOURCE_SHIFT;
+ mask = PERIPH_CLK_SOURCE_MASK;
+ }
+
for (sel = c->inputs; sel->input != NULL; sel++) {
if (sel->input == p) {
val = clk_readl(c->reg);
- val &= ~PERIPH_CLK_SOURCE_MASK;
- val |= (sel->value) << PERIPH_CLK_SOURCE_SHIFT;
+ val &= ~mask;
+ val |= (sel->value) << shift;
if (c->refcnt)
clk_enable(p);
@@ -2149,14 +2173,14 @@
}
static struct clk tegra_list_clks[] = {
- PERIPH_CLK("apbdma", "tegra-dma", NULL, 34, 0, 108000000, mux_pclk, 0),
+ PERIPH_CLK("apbdma", "tegra-apbdma", NULL, 34, 0, 108000000, mux_pclk, 0),
PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET),
PERIPH_CLK("timer", "timer", NULL, 5, 0, 26000000, mux_clk_m, 0),
PERIPH_CLK("i2s1", "tegra20-i2s.0", NULL, 11, 0x100, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71),
PERIPH_CLK("i2s2", "tegra20-i2s.1", NULL, 18, 0x104, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71),
PERIPH_CLK("spdif_out", "spdif_out", NULL, 10, 0x108, 100000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71),
PERIPH_CLK("spdif_in", "spdif_in", NULL, 10, 0x10c, 100000000, mux_pllp_pllc_pllm, MUX | DIV_U71),
- PERIPH_CLK("pwm", "pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_audio_clkm_clk32, MUX | DIV_U71),
+ PERIPH_CLK("pwm", "tegra-pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_audio_clkm_clk32, MUX | DIV_U71 | MUX_PWM),
PERIPH_CLK("spi", "spi", NULL, 43, 0x114, 40000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
PERIPH_CLK("xio", "xio", NULL, 45, 0x120, 150000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
PERIPH_CLK("twc", "twc", NULL, 16, 0x12c, 150000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
@@ -2189,11 +2213,11 @@
PERIPH_CLK("i2c2_i2c", "tegra-i2c.1", "i2c", 0, 0, 72000000, mux_pllp_out3, 0),
PERIPH_CLK("i2c3_i2c", "tegra-i2c.2", "i2c", 0, 0, 72000000, mux_pllp_out3, 0),
PERIPH_CLK("dvc_i2c", "tegra-i2c.3", "i2c", 0, 0, 72000000, mux_pllp_out3, 0),
- PERIPH_CLK("uarta", "uart.0", NULL, 6, 0x178, 600000000, mux_pllp_pllc_pllm_clkm, MUX),
- PERIPH_CLK("uartb", "uart.1", NULL, 7, 0x17c, 600000000, mux_pllp_pllc_pllm_clkm, MUX),
- PERIPH_CLK("uartc", "uart.2", NULL, 55, 0x1a0, 600000000, mux_pllp_pllc_pllm_clkm, MUX),
- PERIPH_CLK("uartd", "uart.3", NULL, 65, 0x1c0, 600000000, mux_pllp_pllc_pllm_clkm, MUX),
- PERIPH_CLK("uarte", "uart.4", NULL, 66, 0x1c4, 600000000, mux_pllp_pllc_pllm_clkm, MUX),
+ PERIPH_CLK("uarta", "tegra-uart.0", NULL, 6, 0x178, 600000000, mux_pllp_pllc_pllm_clkm, MUX),
+ PERIPH_CLK("uartb", "tegra-uart.1", NULL, 7, 0x17c, 600000000, mux_pllp_pllc_pllm_clkm, MUX),
+ PERIPH_CLK("uartc", "tegra-uart.2", NULL, 55, 0x1a0, 600000000, mux_pllp_pllc_pllm_clkm, MUX),
+ PERIPH_CLK("uartd", "tegra-uart.3", NULL, 65, 0x1c0, 600000000, mux_pllp_pllc_pllm_clkm, MUX),
+ PERIPH_CLK("uarte", "tegra-uart.4", NULL, 66, 0x1c4, 600000000, mux_pllp_pllc_pllm_clkm, MUX),
PERIPH_CLK("3d", "3d", NULL, 24, 0x158, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_MANUAL_RESET), /* scales with voltage and process_id */
PERIPH_CLK("2d", "2d", NULL, 21, 0x15c, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */
PERIPH_CLK("vi", "tegra_camera", "vi", 20, 0x148, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */
@@ -2245,20 +2269,16 @@
* table under two names.
*/
static struct clk_duplicate tegra_clk_duplicates[] = {
- CLK_DUPLICATE("uarta", "tegra_uart.0", NULL),
- CLK_DUPLICATE("uartb", "tegra_uart.1", NULL),
- CLK_DUPLICATE("uartc", "tegra_uart.2", NULL),
- CLK_DUPLICATE("uartd", "tegra_uart.3", NULL),
- CLK_DUPLICATE("uarte", "tegra_uart.4", NULL),
+ CLK_DUPLICATE("uarta", "serial8250.0", NULL),
+ CLK_DUPLICATE("uartb", "serial8250.1", NULL),
+ CLK_DUPLICATE("uartc", "serial8250.2", NULL),
+ CLK_DUPLICATE("uartd", "serial8250.3", NULL),
+ CLK_DUPLICATE("uarte", "serial8250.4", NULL),
CLK_DUPLICATE("usbd", "utmip-pad", NULL),
CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
CLK_DUPLICATE("usbd", "tegra-otg", NULL),
CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"),
CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"),
- CLK_DUPLICATE("pwm", "tegra_pwm.0", NULL),
- CLK_DUPLICATE("pwm", "tegra_pwm.1", NULL),
- CLK_DUPLICATE("pwm", "tegra_pwm.2", NULL),
- CLK_DUPLICATE("pwm", "tegra_pwm.3", NULL),
CLK_DUPLICATE("host1x", "tegra_grhost", "host1x"),
CLK_DUPLICATE("2d", "tegra_grhost", "gr2d"),
CLK_DUPLICATE("3d", "tegra_grhost", "gr3d"),
diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c
index e33fe4b..6674f10 100644
--- a/arch/arm/mach-tegra/tegra30_clocks.c
+++ b/arch/arm/mach-tegra/tegra30_clocks.c
@@ -2871,7 +2871,7 @@
}, \
}
struct clk tegra_list_clks[] = {
- PERIPH_CLK("apbdma", "tegra-dma", NULL, 34, 0, 26000000, mux_clk_m, 0),
+ PERIPH_CLK("apbdma", "tegra-apbdma", NULL, 34, 0, 26000000, mux_clk_m, 0),
PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET | PERIPH_ON_APB),
PERIPH_CLK("kbc", "tegra-kbc", NULL, 36, 0, 32768, mux_clk_32k, PERIPH_NO_RESET | PERIPH_ON_APB),
PERIPH_CLK("timer", "timer", NULL, 5, 0, 26000000, mux_clk_m, 0),
@@ -2886,7 +2886,7 @@
PERIPH_CLK("i2s4", "tegra30-i2s.4", NULL, 102, 0x3c0, 26000000, mux_pllaout0_audio4_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
PERIPH_CLK("spdif_out", "tegra30-spdif", "spdif_out", 10, 0x108, 100000000, mux_pllaout0_audio_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
PERIPH_CLK("spdif_in", "tegra30-spdif", "spdif_in", 10, 0x10c, 100000000, mux_pllp_pllc_pllm, MUX | DIV_U71 | PERIPH_ON_APB),
- PERIPH_CLK("pwm", "pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_clk32_clkm, MUX | MUX_PWM | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("pwm", "tegra-pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_clk32_clkm, MUX | MUX_PWM | DIV_U71 | PERIPH_ON_APB),
PERIPH_CLK("d_audio", "tegra30-ahub", "d_audio", 106, 0x3d0, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71),
PERIPH_CLK("dam0", "tegra30-dam.0", NULL, 108, 0x3d8, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71),
PERIPH_CLK("dam1", "tegra30-dam.1", NULL, 109, 0x3dc, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71),
@@ -2924,16 +2924,11 @@
PERIPH_CLK("i2c3", "tegra-i2c.2", NULL, 67, 0x1b8, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB),
PERIPH_CLK("i2c4", "tegra-i2c.3", NULL, 103, 0x3c4, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB),
PERIPH_CLK("i2c5", "tegra-i2c.4", NULL, 47, 0x128, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB),
- PERIPH_CLK("uarta", "tegra_uart.0", NULL, 6, 0x178, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
- PERIPH_CLK("uartb", "tegra_uart.1", NULL, 7, 0x17c, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
- PERIPH_CLK("uartc", "tegra_uart.2", NULL, 55, 0x1a0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
- PERIPH_CLK("uartd", "tegra_uart.3", NULL, 65, 0x1c0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
- PERIPH_CLK("uarte", "tegra_uart.4", NULL, 66, 0x1c4, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
- PERIPH_CLK("uarta_dbg", "serial8250.0", "uarta", 6, 0x178, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
- PERIPH_CLK("uartb_dbg", "serial8250.0", "uartb", 7, 0x17c, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
- PERIPH_CLK("uartc_dbg", "serial8250.0", "uartc", 55, 0x1a0, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
- PERIPH_CLK("uartd_dbg", "serial8250.0", "uartd", 65, 0x1c0, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
- PERIPH_CLK("uarte_dbg", "serial8250.0", "uarte", 66, 0x1c4, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+ PERIPH_CLK("uarta", "tegra-uart.0", NULL, 6, 0x178, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+ PERIPH_CLK("uartb", "tegra-uart.1", NULL, 7, 0x17c, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+ PERIPH_CLK("uartc", "tegra-uart.2", NULL, 55, 0x1a0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+ PERIPH_CLK("uartd", "tegra-uart.3", NULL, 65, 0x1c0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+ PERIPH_CLK("uarte", "tegra-uart.4", NULL, 66, 0x1c4, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
PERIPH_CLK_EX("vi", "tegra_camera", "vi", 20, 0x148, 425000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT, &tegra_vi_clk_ops),
PERIPH_CLK("3d", "3d", NULL, 24, 0x158, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET),
PERIPH_CLK("3d2", "3d2", NULL, 98, 0x3b0, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET),
@@ -2983,6 +2978,11 @@
* table under two names.
*/
struct clk_duplicate tegra_clk_duplicates[] = {
+ CLK_DUPLICATE("uarta", "serial8250.0", NULL),
+ CLK_DUPLICATE("uartb", "serial8250.1", NULL),
+ CLK_DUPLICATE("uartc", "serial8250.2", NULL),
+ CLK_DUPLICATE("uartd", "serial8250.3", NULL),
+ CLK_DUPLICATE("uarte", "serial8250.4", NULL),
CLK_DUPLICATE("usbd", "utmip-pad", NULL),
CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
CLK_DUPLICATE("usbd", "tegra-otg", NULL),
@@ -2990,10 +2990,6 @@
CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"),
CLK_DUPLICATE("dsib", "tegradc.0", "dsib"),
CLK_DUPLICATE("dsia", "tegradc.1", "dsia"),
- CLK_DUPLICATE("pwm", "tegra_pwm.0", NULL),
- CLK_DUPLICATE("pwm", "tegra_pwm.1", NULL),
- CLK_DUPLICATE("pwm", "tegra_pwm.2", NULL),
- CLK_DUPLICATE("pwm", "tegra_pwm.3", NULL),
CLK_DUPLICATE("bsev", "tegra-avp", "bsev"),
CLK_DUPLICATE("bsev", "nvavp", "bsev"),
CLK_DUPLICATE("vde", "tegra-aes", "vde"),
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index 315672c..57b5bdc 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -189,7 +189,7 @@
" Assuming 12Mhz input clock.\n");
rate = 12000000;
} else {
- clk_enable(clk);
+ clk_prepare_enable(clk);
rate = clk_get_rate(clk);
}
@@ -201,7 +201,7 @@
if (IS_ERR(clk))
pr_warn("Unable to get rtc-tegra clock\n");
else
- clk_enable(clk);
+ clk_prepare_enable(clk);
switch (rate) {
case 12000000:
diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c
index 54e353c..022b33a 100644
--- a/arch/arm/mach-tegra/usb_phy.c
+++ b/arch/arm/mach-tegra/usb_phy.c
@@ -247,7 +247,7 @@
unsigned long val, flags;
void __iomem *base = phy->pad_regs;
- clk_enable(phy->pad_clk);
+ clk_prepare_enable(phy->pad_clk);
spin_lock_irqsave(&utmip_pad_lock, flags);
@@ -259,7 +259,7 @@
spin_unlock_irqrestore(&utmip_pad_lock, flags);
- clk_disable(phy->pad_clk);
+ clk_disable_unprepare(phy->pad_clk);
}
static int utmip_pad_power_off(struct tegra_usb_phy *phy)
@@ -272,7 +272,7 @@
return -EINVAL;
}
- clk_enable(phy->pad_clk);
+ clk_prepare_enable(phy->pad_clk);
spin_lock_irqsave(&utmip_pad_lock, flags);
@@ -284,7 +284,7 @@
spin_unlock_irqrestore(&utmip_pad_lock, flags);
- clk_disable(phy->pad_clk);
+ clk_disable_unprepare(phy->pad_clk);
return 0;
}
@@ -580,7 +580,7 @@
msleep(5);
gpio_direction_output(config->reset_gpio, 1);
- clk_enable(phy->clk);
+ clk_prepare_enable(phy->clk);
msleep(1);
val = readl(base + USB_SUSP_CTRL);
@@ -689,7 +689,7 @@
err = PTR_ERR(phy->pll_u);
goto err0;
}
- clk_enable(phy->pll_u);
+ clk_prepare_enable(phy->pll_u);
parent_rate = clk_get_rate(clk_get_parent(phy->pll_u));
for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) {
@@ -735,7 +735,7 @@
return phy;
err1:
- clk_disable(phy->pll_u);
+ clk_disable_unprepare(phy->pll_u);
clk_put(phy->pll_u);
err0:
kfree(phy);
@@ -810,7 +810,7 @@
clk_put(phy->clk);
else
utmip_pad_close(phy);
- clk_disable(phy->pll_u);
+ clk_disable_unprepare(phy->pll_u);
clk_put(phy->pll_u);
kfree(phy);
}
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 53d3d46..c013bbf 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -41,6 +41,7 @@
config MACH_SNOWBALL
bool "U8500 Snowball platform"
select MACH_MOP500
+ select LEDS_GPIO
help
Include support for the snowball development platform.
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 920251c..18ff781 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -80,7 +80,7 @@
};
#endif
-static struct mmci_platform_data mop500_sdi0_data = {
+struct mmci_platform_data mop500_sdi0_data = {
.ios_handler = mop500_sdi0_ios_handler,
.ocr_mask = MMC_VDD_29_30,
.f_max = 50000000,
@@ -227,7 +227,7 @@
};
#endif
-static struct mmci_platform_data mop500_sdi4_data = {
+struct mmci_platform_data mop500_sdi4_data = {
.ocr_mask = MMC_VDD_29_30,
.f_max = 50000000,
.capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 9c74ac5..84461fa 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -58,7 +58,7 @@
static struct gpio_led snowball_led_array[] = {
{
.name = "user_led",
- .default_trigger = "none",
+ .default_trigger = "heartbeat",
.gpio = 142,
},
};
@@ -331,43 +331,12 @@
},
};
-#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm) \
-static struct nmk_i2c_controller u8500_i2c##id##_data = { \
- /* \
- * slave data setup time, which is \
- * 250 ns,100ns,10ns which is 14,6,2 \
- * respectively for a 48 Mhz \
- * i2c clock \
- */ \
- .slsu = _slsu, \
- /* Tx FIFO threshold */ \
- .tft = _tft, \
- /* Rx FIFO threshold */ \
- .rft = _rft, \
- /* std. mode operation */ \
- .clk_freq = clk, \
- /* Slave response timeout(ms) */\
- .timeout = t_out, \
- .sm = _sm, \
-}
-
-/*
- * The board uses 4 i2c controllers, initialize all of
- * them with slave data setup time of 250 ns,
- * Tx & Rx FIFO threshold values as 8 and standard
- * mode of operation
- */
-U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-
static void __init mop500_i2c_init(struct device *parent)
{
- db8500_add_i2c0(parent, &u8500_i2c0_data);
- db8500_add_i2c1(parent, &u8500_i2c1_data);
- db8500_add_i2c2(parent, &u8500_i2c2_data);
- db8500_add_i2c3(parent, &u8500_i2c3_data);
+ db8500_add_i2c0(parent, NULL);
+ db8500_add_i2c1(parent, NULL);
+ db8500_add_i2c2(parent, NULL);
+ db8500_add_i2c3(parent, NULL);
}
static struct gpio_keys_button mop500_gpio_keys[] = {
@@ -580,43 +549,12 @@
udelay(1);
}
-/* This needs to be referenced by callbacks */
-struct pinctrl *u0_p;
-struct pinctrl_state *u0_def;
-struct pinctrl_state *u0_sleep;
-
-static void ux500_uart0_init(void)
-{
- int ret;
-
- if (IS_ERR(u0_p) || IS_ERR(u0_def))
- return;
-
- ret = pinctrl_select_state(u0_p, u0_def);
- if (ret)
- pr_err("could not set UART0 defstate\n");
-}
-
-static void ux500_uart0_exit(void)
-{
- int ret;
-
- if (IS_ERR(u0_p) || IS_ERR(u0_sleep))
- return;
-
- ret = pinctrl_select_state(u0_p, u0_sleep);
- if (ret)
- pr_err("could not set UART0 idlestate\n");
-}
-
static struct amba_pl011_data uart0_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart0_dma_cfg_rx,
.dma_tx_param = &uart0_dma_cfg_tx,
#endif
- .init = ux500_uart0_init,
- .exit = ux500_uart0_exit,
.reset = ux500_uart0_reset,
};
@@ -638,28 +576,7 @@
static void __init mop500_uart_init(struct device *parent)
{
- struct amba_device *uart0_device;
-
- uart0_device = db8500_add_uart0(parent, &uart0_plat);
- if (uart0_device) {
- u0_p = pinctrl_get(&uart0_device->dev);
- if (IS_ERR(u0_p))
- dev_err(&uart0_device->dev,
- "could not get UART0 pinctrl\n");
- else {
- u0_def = pinctrl_lookup_state(u0_p,
- PINCTRL_STATE_DEFAULT);
- if (IS_ERR(u0_def)) {
- dev_err(&uart0_device->dev,
- "could not get UART0 defstate\n");
- }
- u0_sleep = pinctrl_lookup_state(u0_p,
- PINCTRL_STATE_SLEEP);
- if (IS_ERR(u0_sleep))
- dev_err(&uart0_device->dev,
- "could not get UART0 idlestate\n");
- }
- }
+ db8500_add_uart0(parent, &uart0_plat);
db8500_add_uart1(parent, &uart1_plat);
db8500_add_uart2(parent, &uart2_plat);
}
@@ -677,11 +594,6 @@
&ab8500_device,
};
-static struct platform_device *snowball_of_platform_devs[] __initdata = {
- &snowball_led_dev,
- &snowball_key_dev,
-};
-
static void __init mop500_init_machine(void)
{
struct device *parent = NULL;
@@ -821,6 +733,11 @@
#ifdef CONFIG_MACH_UX500_DT
+static struct platform_device *snowball_of_platform_devs[] __initdata = {
+ &snowball_led_dev,
+ &snowball_key_dev,
+};
+
struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires DMA and call-back bindings. */
OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
@@ -828,6 +745,8 @@
OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
/* Requires DMA bindings. */
OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
/* Requires clock name bindings. */
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
@@ -838,6 +757,13 @@
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
+ /* Requires device name bindings. */
+ OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
{},
};
@@ -870,8 +796,6 @@
for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
mop500_platform_devs[i]->dev.parent = parent;
- for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
- snowball_platform_devs[i]->dev.parent = parent;
/* automatically probe child nodes of db8500 device */
of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
@@ -890,18 +814,6 @@
mop500_uib_init();
- } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
- /*
- * Devices to be DT:ed:
- * snowball_led_dev = todo
- * snowball_key_dev = todo
- * snowball_sbnet_dev = done
- * ab8500_device = done
- */
- platform_add_devices(snowball_of_platform_devs,
- ARRAY_SIZE(snowball_of_platform_devs));
-
- snowball_sdi_init(parent);
} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
/*
* The HREFv60 board removed a GPIO expander and routed
@@ -923,7 +835,6 @@
mop500_uib_init();
}
- mop500_i2c_init(parent);
/* This board has full regulator constraints */
regulator_has_full_constraints();
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 2f87b25..b5bfc1a 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -9,6 +9,7 @@
/* For NOMADIK_NR_GPIO */
#include <mach/irqs.h>
+#include <linux/amba/mmci.h>
/* Snowball specific GPIO assignments, this board has no GPIO expander */
#define SNOWBALL_ACCEL_INT1_GPIO 163
@@ -78,6 +79,8 @@
struct device;
struct i2c_board_info;
+extern struct mmci_platform_data mop500_sdi0_data;
+extern struct mmci_platform_data mop500_sdi4_data;
extern void mop500_sdi_init(struct device *parent);
extern void snowball_sdi_init(struct device *parent);
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 33275eb..c8dd94f 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -139,7 +139,6 @@
static struct platform_device *of_platform_devs[] __initdata = {
&u8500_dma40_device,
- &db8500_pmu_device,
};
static resource_size_t __initdata db8500_gpio_base[] = {
@@ -237,7 +236,6 @@
parent = db8500_soc_device_init();
- db8500_add_rtc(parent);
db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
platform_device_register_data(parent,
@@ -249,7 +247,7 @@
/*
* Devices to be DT:ed:
* u8500_dma40_device = todo
- * db8500_pmu_device = todo
+ * db8500_pmu_device = done
* db8500_prcmu_device = done
*/
platform_add_devices(of_platform_devs, ARRAY_SIZE(of_platform_devs));
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index 741e71f..66e7f00 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -63,8 +63,10 @@
/* TODO: Once MTU has been DT:ed place code above into else. */
if (of_have_populated_dt()) {
+#ifdef CONFIG_OF
np = of_find_matching_node(NULL, prcmu_timer_of_match);
if (!np)
+#endif
goto dt_fail;
tmp_base = of_iomap(np, 0);
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index cf4687e..cd8ea35 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -169,26 +169,13 @@
.pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
.length = VERSATILE_PCI_CFG_BASE_SIZE,
.type = MT_DEVICE
- },
-#if 0
- {
- .virtual = VERSATILE_PCI_VIRT_MEM_BASE0,
+ }, {
+ .virtual = (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0,
.pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
- .length = SZ_16M,
- .type = MT_DEVICE
- }, {
- .virtual = VERSATILE_PCI_VIRT_MEM_BASE1,
- .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
- .length = SZ_16M,
- .type = MT_DEVICE
- }, {
- .virtual = VERSATILE_PCI_VIRT_MEM_BASE2,
- .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
- .length = SZ_16M,
+ .length = IO_SPACE_LIMIT,
.type = MT_DEVICE
},
#endif
-#endif
};
void __init versatile_map_io(void)
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
index 4d4973d..408e58d 100644
--- a/arch/arm/mach-versatile/include/mach/hardware.h
+++ b/arch/arm/mach-versatile/include/mach/hardware.h
@@ -29,8 +29,9 @@
*/
#define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul
#define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul
+#define VERSATILE_PCI_VIRT_MEM_BASE0 (void __iomem *)PCIO_BASE
-/* macro to get at IO space when running virtually */
+/* macro to get at MMIO space when running virtually */
#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
#define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n))
diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h
new file mode 100644
index 0000000..0406513
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-versatile/include/mach/io.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define PCIO_BASE 0xeb000000ul
+
+#define __io(a) ((a) + PCIO_BASE)
+
+#endif
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 15c6a00..e95bf84 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -169,11 +169,18 @@
.write = versatile_write_config,
};
+static struct resource io_port = {
+ .name = "PCI",
+ .start = 0,
+ .end = IO_SPACE_LIMIT,
+ .flags = IORESOURCE_IO,
+};
+
static struct resource io_mem = {
.name = "PCI I/O space",
.start = VERSATILE_PCI_MEM_BASE0,
.end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
- .flags = IORESOURCE_IO,
+ .flags = IORESOURCE_MEM,
};
static struct resource non_mem = {
@@ -200,6 +207,12 @@
"memory region (%d)\n", ret);
goto out;
}
+ ret = request_resource(&ioport_resource, &io_port);
+ if (ret) {
+ printk(KERN_ERR "PCI: unable to allocate I/O "
+ "port region (%d)\n", ret);
+ goto out;
+ }
ret = request_resource(&iomem_resource, &non_mem);
if (ret) {
printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
@@ -218,7 +231,7 @@
* the mem resource for this bus
* the prefetch mem resource for this bus
*/
- pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset);
+ pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset);
pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
@@ -249,6 +262,7 @@
if (nr == 0) {
sys->mem_offset = 0;
+ sys->io_offset = 0;
ret = pci_versatile_setup_resources(sys);
if (ret < 0) {
printk("pci_versatile_setup: resources... oops?\n");
@@ -325,7 +339,6 @@
static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
- int devslot = PCI_SLOT(dev->devfn);
/* slot, pin, irq
* 24 1 27
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index cf8730d..fc3730f 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -2,7 +2,8 @@
depends on ARCH_VEXPRESS
config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
- bool
+ bool "Enable A5 and A9 only errata work-arounds"
+ default y
select ARM_ERRATA_720789
select ARM_ERRATA_751472
select PL310_ERRATA_753970 if CACHE_PL310
@@ -14,7 +15,6 @@
config ARCH_VEXPRESS_CA9X4
bool "Versatile Express Cortex-A9x4 tile"
- select ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
select ARM_GIC
select CPU_V7
select HAVE_SMP
@@ -22,7 +22,6 @@
config ARCH_VEXPRESS_DT
bool "Device Tree support for Versatile Express platforms"
- select ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
select ARM_GIC
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot
index 909f85e..318d308 100644
--- a/arch/arm/mach-vexpress/Makefile.boot
+++ b/arch/arm/mach-vexpress/Makefile.boot
@@ -6,4 +6,5 @@
dtb-$(CONFIG_ARCH_VEXPRESS_DT) += vexpress-v2p-ca5s.dtb \
vexpress-v2p-ca9.dtb \
- vexpress-v2p-ca15-tc1.dtb
+ vexpress-v2p-ca15-tc1.dtb \
+ vexpress-v2p-ca15_a7.dtb
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index c65cc3b..61c4924 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -66,8 +66,15 @@
static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)
{
- v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0);
- v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE_DB1, 2);
+ u32 site = v2m_get_master_site();
+
+ /*
+ * Old firmware was using the "site" component of the command
+ * to control the DVI muxer (while it should be always 0 ie. MB).
+ * Newer firmware uses the data register. Keep both for compatibility.
+ */
+ v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE(site), site);
+ v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE(SYS_CFG_SITE_MB), 2);
}
static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
@@ -105,43 +112,11 @@
};
-static long ct_round(struct clk *clk, unsigned long rate)
-{
- return rate;
-}
-
-static int ct_set(struct clk *clk, unsigned long rate)
-{
- return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_DB1 | 1, rate);
-}
-
-static const struct clk_ops osc1_clk_ops = {
- .round = ct_round,
- .set = ct_set,
-};
-
-static struct clk osc1_clk = {
- .ops = &osc1_clk_ops,
- .rate = 24000000,
-};
-
-static struct clk ct_sp804_clk = {
- .rate = 1000000,
-};
-
-static struct clk_lookup lookups[] = {
- { /* CLCD */
- .dev_id = "ct:clcd",
- .clk = &osc1_clk,
- }, { /* SP804 timers */
- .dev_id = "sp804",
- .con_id = "ct-timer0",
- .clk = &ct_sp804_clk,
- }, { /* SP804 timers */
- .dev_id = "sp804",
- .con_id = "ct-timer1",
- .clk = &ct_sp804_clk,
- },
+static struct v2m_osc ct_osc1 = {
+ .osc = 1,
+ .rate_min = 10000000,
+ .rate_max = 80000000,
+ .rate_default = 23750000,
};
static struct resource pmu_resources[] = {
@@ -174,14 +149,10 @@
.resource = pmu_resources,
};
-static void __init ct_ca9x4_init_early(void)
-{
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
-
static void __init ct_ca9x4_init(void)
{
int i;
+ struct clk *clk;
#ifdef CONFIG_CACHE_L2X0
void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
@@ -193,6 +164,10 @@
l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
#endif
+ ct_osc1.site = v2m_get_master_site();
+ clk = v2m_osc_register("ct:osc1", &ct_osc1);
+ clk_register_clkdev(clk, NULL, "ct:clcd");
+
for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++)
amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
@@ -234,7 +209,6 @@
.id = V2M_CT_ID_CA9,
.name = "CA9x4",
.map_io = ct_ca9x4_map_io,
- .init_early = ct_ca9x4_init_early,
.init_irq = ct_ca9x4_init_irq,
.init_tile = ct_ca9x4_init,
#ifdef CONFIG_SMP
diff --git a/arch/arm/mach-vexpress/include/mach/clkdev.h b/arch/arm/mach-vexpress/include/mach/clkdev.h
deleted file mode 100644
index 3f8307d..0000000
--- a/arch/arm/mach-vexpress/include/mach/clkdev.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <plat/clock.h>
-
-struct clk {
- const struct clk_ops *ops;
- unsigned long rate;
- const struct icst_params *params;
-};
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S
index fa82247..9f509f5 100644
--- a/arch/arm/mach-vexpress/include/mach/debug-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S
@@ -18,6 +18,8 @@
#define DEBUG_LL_VIRT_BASE 0xf8000000
+#if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT)
+
.macro addruart,rp,rv,tmp
@ Make an educated guess regarding the memory map:
@@ -41,3 +43,42 @@
.endm
#include <asm/hardware/debug-pl01x.S>
+
+#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CA9)
+
+ .macro addruart,rp,rv,tmp
+ mov \rp, #DEBUG_LL_UART_OFFSET
+ orr \rv, \rp, #DEBUG_LL_VIRT_BASE
+ orr \rp, \rp, #DEBUG_LL_PHYS_BASE
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
+
+#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_RS1)
+
+ .macro addruart,rp,rv,tmp
+ mov \rp, #DEBUG_LL_UART_OFFSET_RS1
+ orr \rv, \rp, #DEBUG_LL_VIRT_BASE
+ orr \rp, \rp, #DEBUG_LL_PHYS_BASE_RS1
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
+
+#else /* CONFIG_DEBUG_LL_UART_NONE */
+
+ .macro addruart, rp, rv, tmp
+ /* Safe dummy values */
+ mov \rp, #0
+ mov \rv, #DEBUG_LL_VIRT_BASE
+ .endm
+
+ .macro senduart,rd,rx
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
+
+ .macro busyuart,rd,rx
+ .endm
+
+#endif
diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h
index 31a9289..1e388c7 100644
--- a/arch/arm/mach-vexpress/include/mach/motherboard.h
+++ b/arch/arm/mach-vexpress/include/mach/motherboard.h
@@ -1,6 +1,8 @@
#ifndef __MACH_MOTHERBOARD_H
#define __MACH_MOTHERBOARD_H
+#include <linux/clk-provider.h>
+
/*
* Physical addresses, offset from V2M_PA_CS0-3
*/
@@ -104,9 +106,10 @@
#define SYS_CFG_REBOOT (9 << 20)
#define SYS_CFG_DVIMODE (11 << 20)
#define SYS_CFG_POWER (12 << 20)
-#define SYS_CFG_SITE_MB (0 << 16)
-#define SYS_CFG_SITE_DB1 (1 << 16)
-#define SYS_CFG_SITE_DB2 (2 << 16)
+#define SYS_CFG_SITE(n) ((n) << 16)
+#define SYS_CFG_SITE_MB 0
+#define SYS_CFG_SITE_DB1 1
+#define SYS_CFG_SITE_DB2 2
#define SYS_CFG_STACK(n) ((n) << 12)
#define SYS_CFG_ERR (1 << 1)
@@ -122,6 +125,8 @@
#define SYS_MISC_MASTERSITE (1 << 14)
#define SYS_PROCIDx_HBI_MASK 0xfff
+int v2m_get_master_site(void);
+
/*
* Core tile IDs
*/
@@ -144,4 +149,21 @@
extern struct ct_desc *ct_desc;
+/*
+ * OSC clock provider
+ */
+struct v2m_osc {
+ struct clk_hw hw;
+ u8 site; /* 0 = motherboard, 1 = site 1, 2 = site 2 */
+ u8 stack; /* board stack position */
+ u16 osc;
+ unsigned long rate_min;
+ unsigned long rate_max;
+ unsigned long rate_default;
+};
+
+#define to_v2m_osc(osc) container_of(osc, struct v2m_osc, hw)
+
+struct clk *v2m_osc_register(const char *name, struct v2m_osc *osc);
+
#endif
diff --git a/arch/arm/mach-vexpress/include/mach/uncompress.h b/arch/arm/mach-vexpress/include/mach/uncompress.h
index 7dab559..1e472eb 100644
--- a/arch/arm/mach-vexpress/include/mach/uncompress.h
+++ b/arch/arm/mach-vexpress/include/mach/uncompress.h
@@ -27,6 +27,7 @@
static unsigned long get_uart_base(void)
{
+#if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT)
unsigned long mpcore_periph;
/*
@@ -42,6 +43,13 @@
return UART_BASE;
else
return UART_BASE_RS1;
+#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CA9)
+ return UART_BASE;
+#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_RS1)
+ return UART_BASE_RS1;
+#else
+ return 0;
+#endif
}
/*
@@ -51,6 +59,9 @@
{
unsigned long base = get_uart_base();
+ if (!base)
+ return;
+
while (AMBA_UART_FR(base) & (1 << 5))
barrier();
@@ -61,6 +72,9 @@
{
unsigned long base = get_uart_base();
+ if (!base)
+ return;
+
while (AMBA_UART_FR(base) & (1 << 3))
barrier();
}
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index fde26ad..37608f2 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -16,7 +16,10 @@
#include <linux/spinlock.h>
#include <linux/usb/isp1760.h>
#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
#include <linux/mtd/physmap.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <asm/arch_timer.h>
#include <asm/mach-types.h>
@@ -81,16 +84,6 @@
sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0");
}
-static void __init v2m_timer_init(void)
-{
- v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K));
- v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0);
-}
-
-static struct sys_timer v2m_timer = {
- .init = v2m_timer_init,
-};
-
static DEFINE_SPINLOCK(v2m_cfg_lock);
@@ -147,6 +140,13 @@
writel(data, v2m_sysreg_base + V2M_SYS_FLAGSSET);
}
+int v2m_get_master_site(void)
+{
+ u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC);
+
+ return misc & SYS_MISC_MASTERSITE ? SYS_CFG_SITE_DB2 : SYS_CFG_SITE_DB1;
+}
+
static struct resource v2m_pcie_i2c_resource = {
.start = V2M_SERIAL_BUS_PCI,
@@ -201,6 +201,11 @@
.dev.platform_data = &v2m_eth_config,
};
+static struct regulator_consumer_supply v2m_eth_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
static struct resource v2m_usb_resources[] = {
{
.start = V2M_ISP1761,
@@ -319,98 +324,145 @@
};
-static long v2m_osc_round(struct clk *clk, unsigned long rate)
+static unsigned long v2m_osc_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
{
+ struct v2m_osc *osc = to_v2m_osc(hw);
+
+ return !parent_rate ? osc->rate_default : parent_rate;
+}
+
+static long v2m_osc_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct v2m_osc *osc = to_v2m_osc(hw);
+
+ if (WARN_ON(rate < osc->rate_min))
+ rate = osc->rate_min;
+
+ if (WARN_ON(rate > osc->rate_max))
+ rate = osc->rate_max;
+
return rate;
}
-static int v2m_osc1_set(struct clk *clk, unsigned long rate)
+static int v2m_osc_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
{
- return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_MB | 1, rate);
+ struct v2m_osc *osc = to_v2m_osc(hw);
+
+ v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE(osc->site) |
+ SYS_CFG_STACK(osc->stack) | osc->osc, rate);
+
+ return 0;
}
-static const struct clk_ops osc1_clk_ops = {
- .round = v2m_osc_round,
- .set = v2m_osc1_set,
+static struct clk_ops v2m_osc_ops = {
+ .recalc_rate = v2m_osc_recalc_rate,
+ .round_rate = v2m_osc_round_rate,
+ .set_rate = v2m_osc_set_rate,
};
-static struct clk osc1_clk = {
- .ops = &osc1_clk_ops,
- .rate = 24000000,
+struct clk * __init v2m_osc_register(const char *name, struct v2m_osc *osc)
+{
+ struct clk_init_data init;
+
+ WARN_ON(osc->site > 2);
+ WARN_ON(osc->stack > 15);
+ WARN_ON(osc->osc > 4095);
+
+ init.name = name;
+ init.ops = &v2m_osc_ops;
+ init.flags = CLK_IS_ROOT;
+ init.num_parents = 0;
+
+ osc->hw.init = &init;
+
+ return clk_register(NULL, &osc->hw);
+}
+
+static struct v2m_osc v2m_mb_osc1 = {
+ .site = SYS_CFG_SITE_MB,
+ .osc = 1,
+ .rate_min = 23750000,
+ .rate_max = 63500000,
+ .rate_default = 23750000,
};
-static struct clk osc2_clk = {
- .rate = 24000000,
+static const char *v2m_ref_clk_periphs[] __initconst = {
+ "mb:wdt", "1000f000.wdt", "1c0f0000.wdt", /* SP805 WDT */
};
-static struct clk v2m_sp804_clk = {
- .rate = 1000000,
+static const char *v2m_osc1_periphs[] __initconst = {
+ "mb:clcd", "1001f000.clcd", "1c1f0000.clcd", /* PL111 CLCD */
};
-static struct clk v2m_ref_clk = {
- .rate = 32768,
+static const char *v2m_osc2_periphs[] __initconst = {
+ "mb:mmci", "10005000.mmci", "1c050000.mmci", /* PL180 MMCI */
+ "mb:kmi0", "10006000.kmi", "1c060000.kmi", /* PL050 KMI0 */
+ "mb:kmi1", "10007000.kmi", "1c070000.kmi", /* PL050 KMI1 */
+ "mb:uart0", "10009000.uart", "1c090000.uart", /* PL011 UART0 */
+ "mb:uart1", "1000a000.uart", "1c0a0000.uart", /* PL011 UART1 */
+ "mb:uart2", "1000b000.uart", "1c0b0000.uart", /* PL011 UART2 */
+ "mb:uart3", "1000c000.uart", "1c0c0000.uart", /* PL011 UART3 */
};
-static struct clk dummy_apb_pclk;
+static void __init v2m_clk_init(void)
+{
+ struct clk *clk;
+ int i;
-static struct clk_lookup v2m_lookups[] = {
- { /* AMBA bus clock */
- .con_id = "apb_pclk",
- .clk = &dummy_apb_pclk,
- }, { /* UART0 */
- .dev_id = "mb:uart0",
- .clk = &osc2_clk,
- }, { /* UART1 */
- .dev_id = "mb:uart1",
- .clk = &osc2_clk,
- }, { /* UART2 */
- .dev_id = "mb:uart2",
- .clk = &osc2_clk,
- }, { /* UART3 */
- .dev_id = "mb:uart3",
- .clk = &osc2_clk,
- }, { /* KMI0 */
- .dev_id = "mb:kmi0",
- .clk = &osc2_clk,
- }, { /* KMI1 */
- .dev_id = "mb:kmi1",
- .clk = &osc2_clk,
- }, { /* MMC0 */
- .dev_id = "mb:mmci",
- .clk = &osc2_clk,
- }, { /* CLCD */
- .dev_id = "mb:clcd",
- .clk = &osc1_clk,
- }, { /* SP805 WDT */
- .dev_id = "mb:wdt",
- .clk = &v2m_ref_clk,
- }, { /* SP804 timers */
- .dev_id = "sp804",
- .con_id = "v2m-timer0",
- .clk = &v2m_sp804_clk,
- }, { /* SP804 timers */
- .dev_id = "sp804",
- .con_id = "v2m-timer1",
- .clk = &v2m_sp804_clk,
- },
+ clk = clk_register_fixed_rate(NULL, "dummy_apb_pclk", NULL,
+ CLK_IS_ROOT, 0);
+ WARN_ON(clk_register_clkdev(clk, "apb_pclk", NULL));
+
+ clk = clk_register_fixed_rate(NULL, "mb:ref_clk", NULL,
+ CLK_IS_ROOT, 32768);
+ for (i = 0; i < ARRAY_SIZE(v2m_ref_clk_periphs); i++)
+ WARN_ON(clk_register_clkdev(clk, NULL, v2m_ref_clk_periphs[i]));
+
+ clk = clk_register_fixed_rate(NULL, "mb:sp804_clk", NULL,
+ CLK_IS_ROOT, 1000000);
+ WARN_ON(clk_register_clkdev(clk, "v2m-timer0", "sp804"));
+ WARN_ON(clk_register_clkdev(clk, "v2m-timer1", "sp804"));
+
+ clk = v2m_osc_register("mb:osc1", &v2m_mb_osc1);
+ for (i = 0; i < ARRAY_SIZE(v2m_osc1_periphs); i++)
+ WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc1_periphs[i]));
+
+ clk = clk_register_fixed_rate(NULL, "mb:osc2", NULL,
+ CLK_IS_ROOT, 24000000);
+ for (i = 0; i < ARRAY_SIZE(v2m_osc2_periphs); i++)
+ WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc2_periphs[i]));
+}
+
+static void __init v2m_timer_init(void)
+{
+ v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K));
+ v2m_clk_init();
+ v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0);
+}
+
+static struct sys_timer v2m_timer = {
+ .init = v2m_timer_init,
};
static void __init v2m_init_early(void)
{
- ct_desc->init_early();
- clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
+ if (ct_desc->init_early)
+ ct_desc->init_early();
versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000);
}
static void v2m_power_off(void)
{
- if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0))
+ if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0))
printk(KERN_EMERG "Unable to shutdown\n");
}
static void v2m_restart(char str, const char *cmd)
{
- if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0))
+ if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0))
printk(KERN_EMERG "Unable to reboot\n");
}
@@ -458,6 +510,9 @@
{
int i;
+ regulator_register_fixed(0, v2m_eth_supplies,
+ ARRAY_SIZE(v2m_eth_supplies));
+
platform_device_register(&v2m_pcie_i2c_device);
platform_device_register(&v2m_ddc_i2c_device);
platform_device_register(&v2m_flash_device);
@@ -522,77 +577,6 @@
#endif
}
-static struct clk_lookup v2m_dt_lookups[] = {
- { /* AMBA bus clock */
- .con_id = "apb_pclk",
- .clk = &dummy_apb_pclk,
- }, { /* SP804 timers */
- .dev_id = "sp804",
- .con_id = "v2m-timer0",
- .clk = &v2m_sp804_clk,
- }, { /* SP804 timers */
- .dev_id = "sp804",
- .con_id = "v2m-timer1",
- .clk = &v2m_sp804_clk,
- }, { /* PL180 MMCI */
- .dev_id = "mb:mmci", /* 10005000.mmci */
- .clk = &osc2_clk,
- }, { /* PL050 KMI0 */
- .dev_id = "10006000.kmi",
- .clk = &osc2_clk,
- }, { /* PL050 KMI1 */
- .dev_id = "10007000.kmi",
- .clk = &osc2_clk,
- }, { /* PL011 UART0 */
- .dev_id = "10009000.uart",
- .clk = &osc2_clk,
- }, { /* PL011 UART1 */
- .dev_id = "1000a000.uart",
- .clk = &osc2_clk,
- }, { /* PL011 UART2 */
- .dev_id = "1000b000.uart",
- .clk = &osc2_clk,
- }, { /* PL011 UART3 */
- .dev_id = "1000c000.uart",
- .clk = &osc2_clk,
- }, { /* SP805 WDT */
- .dev_id = "1000f000.wdt",
- .clk = &v2m_ref_clk,
- }, { /* PL111 CLCD */
- .dev_id = "1001f000.clcd",
- .clk = &osc1_clk,
- },
- /* RS1 memory map */
- { /* PL180 MMCI */
- .dev_id = "mb:mmci", /* 1c050000.mmci */
- .clk = &osc2_clk,
- }, { /* PL050 KMI0 */
- .dev_id = "1c060000.kmi",
- .clk = &osc2_clk,
- }, { /* PL050 KMI1 */
- .dev_id = "1c070000.kmi",
- .clk = &osc2_clk,
- }, { /* PL011 UART0 */
- .dev_id = "1c090000.uart",
- .clk = &osc2_clk,
- }, { /* PL011 UART1 */
- .dev_id = "1c0a0000.uart",
- .clk = &osc2_clk,
- }, { /* PL011 UART2 */
- .dev_id = "1c0b0000.uart",
- .clk = &osc2_clk,
- }, { /* PL011 UART3 */
- .dev_id = "1c0c0000.uart",
- .clk = &osc2_clk,
- }, { /* SP805 WDT */
- .dev_id = "1c0f0000.wdt",
- .clk = &v2m_ref_clk,
- }, { /* PL111 CLCD */
- .dev_id = "1c1f0000.clcd",
- .clk = &osc1_clk,
- },
-};
-
void __init v2m_dt_init_early(void)
{
struct device_node *node;
@@ -605,8 +589,8 @@
/* Confirm board type against DT property, if available */
if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) {
- u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC);
- u32 id = readl(v2m_sysreg_base + (misc & SYS_MISC_MASTERSITE ?
+ int site = v2m_get_master_site();
+ u32 id = readl(v2m_sysreg_base + (site == SYS_CFG_SITE_DB2 ?
V2M_SYS_PROCID1 : V2M_SYS_PROCID0));
u32 hbi = id & SYS_PROCIDx_HBI_MASK;
@@ -614,8 +598,6 @@
pr_warning("vexpress: DT HBI (%x) is not matching "
"hardware (%x)!\n", dt_hbi, hbi);
}
-
- clkdev_add_table(v2m_dt_lookups, ARRAY_SIZE(v2m_dt_lookups));
}
static struct of_device_id vexpress_irq_match[] __initdata = {
@@ -637,6 +619,8 @@
node = of_find_compatible_node(NULL, NULL, "arm,sp810");
v2m_sysctl_init(of_iomap(node, 0));
+ v2m_clk_init();
+
err = of_property_read_string(of_aliases, "arm,v2m_timer", &path);
if (WARN_ON(err))
return;
diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile
index 81aedb7..54e6997 100644
--- a/arch/arm/mach-vt8500/Makefile
+++ b/arch/arm/mach-vt8500/Makefile
@@ -1,4 +1,4 @@
-obj-y += devices.o gpio.o irq.o timer.o
+obj-y += devices.o gpio.o irq.o timer.o restart.o
obj-$(CONFIG_VTWM_VERSION_VT8500) += devices-vt8500.o
obj-$(CONFIG_VTWM_VERSION_WM8505) += devices-wm8505.o
diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c
index a464c75..f9fbeb2 100644
--- a/arch/arm/mach-vt8500/bv07.c
+++ b/arch/arm/mach-vt8500/bv07.c
@@ -23,6 +23,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <mach/restart.h>
#include "devices.h"
@@ -62,6 +63,7 @@
else
printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n");
+ wmt_setup_restart();
vt8500_set_resources();
platform_add_devices(devices, ARRAY_SIZE(devices));
vt8500_gpio_init();
@@ -69,6 +71,7 @@
MACHINE_START(BV07, "Benign BV07 Mini Netbook")
.atag_offset = 0x100,
+ .restart = wmt_restart,
.reserve = vt8500_reserve_mem,
.map_io = vt8500_map_io,
.init_irq = vt8500_init_irq,
diff --git a/arch/arm/mach-vt8500/include/mach/restart.h b/arch/arm/mach-vt8500/include/mach/restart.h
new file mode 100644
index 0000000..89f9b78
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/restart.h
@@ -0,0 +1,17 @@
+/* linux/arch/arm/mach-vt8500/restart.h
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+void wmt_setup_restart(void);
+void wmt_restart(char mode, const char *cmd);
diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h
deleted file mode 100644
index 58fa801..0000000
--- a/arch/arm/mach-vt8500/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-vt8500/include/mach/system.h
- *
- */
-#include <asm/io.h>
-
-/* PM Software Reset request register */
-#define VT8500_PMSR_VIRT 0xf8130060
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- writel(1, VT8500_PMSR_VIRT);
-}
diff --git a/arch/arm/mach-vt8500/restart.c b/arch/arm/mach-vt8500/restart.c
new file mode 100644
index 0000000..497e89a
--- /dev/null
+++ b/arch/arm/mach-vt8500/restart.c
@@ -0,0 +1,54 @@
+/* linux/arch/arm/mach-vt8500/restart.c
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <asm/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#define LEGACY_PMC_BASE 0xD8130000
+#define WMT_PRIZM_PMSR_REG 0x60
+
+static void __iomem *pmc_base;
+
+void wmt_setup_restart(void)
+{
+ struct device_node *np;
+
+ /*
+ * Check if Power Mgmt Controller node is present in device tree. If no
+ * device tree node, use the legacy PMSR value (valid for all current
+ * SoCs).
+ */
+ np = of_find_compatible_node(NULL, NULL, "wmt,prizm-pmc");
+ if (np) {
+ pmc_base = of_iomap(np, 0);
+
+ if (!pmc_base)
+ pr_err("%s:of_iomap(pmc) failed\n", __func__);
+
+ of_node_put(np);
+ } else {
+ pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000);
+ if (!pmc_base) {
+ pr_err("%s:ioremap(rstc) failed\n", __func__);
+ return;
+ }
+ }
+}
+
+void wmt_restart(char mode, const char *cmd)
+{
+ if (pmc_base)
+ writel(1, pmc_base + WMT_PRIZM_PMSR_REG);
+}
diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c
index cf910a9..db19886 100644
--- a/arch/arm/mach-vt8500/wm8505_7in.c
+++ b/arch/arm/mach-vt8500/wm8505_7in.c
@@ -23,6 +23,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <mach/restart.h>
#include "devices.h"
@@ -61,7 +62,7 @@
pm_power_off = &vt8500_power_off;
else
printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n");
-
+ wmt_setup_restart();
wm8505_set_resources();
platform_add_devices(devices, ARRAY_SIZE(devices));
vt8500_gpio_init();
@@ -69,6 +70,7 @@
MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook")
.atag_offset = 0x100,
+ .restart = wmt_restart,
.reserve = wm8505_reserve_mem,
.map_io = wm8505_map_io,
.init_irq = wm8505_init_irq,
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 106c4c0..655878b 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -228,7 +228,7 @@
#define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M
-unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
+static unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
void __init init_consistent_dma_size(unsigned long size)
{
@@ -321,7 +321,7 @@
.vm_list = LIST_HEAD_INIT(coherent_head.vm_list),
};
-size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8;
+static size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8;
static int __init early_coherent_pool(char *p)
{
@@ -1067,7 +1067,7 @@
return NULL;
while (count) {
- int j, order = __ffs(count);
+ int j, order = __fls(count);
pages[i] = alloc_pages(gfp | __GFP_NOWARN, order);
while (!pages[i] && order)
@@ -1091,7 +1091,7 @@
while (--i)
if (pages[i])
__free_pages(pages[i], 0);
- if (array_size < PAGE_SIZE)
+ if (array_size <= PAGE_SIZE)
kfree(pages);
else
vfree(pages);
@@ -1106,7 +1106,7 @@
for (i = 0; i < count; i++)
if (pages[i])
__free_pages(pages[i], 0);
- if (array_size < PAGE_SIZE)
+ if (array_size <= PAGE_SIZE)
kfree(pages);
else
vfree(pages);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index c21d06c..f54d592 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -212,7 +212,7 @@
* allocations. This must be the smallest DMA mask in the system,
* so a successful GFP_DMA allocation will always satisfy this.
*/
-u32 arm_dma_limit;
+phys_addr_t arm_dma_limit;
static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole,
unsigned long dma_size)
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 93dc0c1..2e8a1ef 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -62,9 +62,9 @@
#endif
#ifdef CONFIG_ZONE_DMA
-extern u32 arm_dma_limit;
+extern phys_addr_t arm_dma_limit;
#else
-#define arm_dma_limit ((u32)~0)
+#define arm_dma_limit ((phys_addr_t)~0)
#endif
extern phys_addr_t arm_lowmem_limit;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e5dad60..cf4528d 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -791,6 +791,79 @@
}
}
+#ifndef CONFIG_ARM_LPAE
+
+/*
+ * The Linux PMD is made of two consecutive section entries covering 2MB
+ * (see definition in include/asm/pgtable-2level.h). However a call to
+ * create_mapping() may optimize static mappings by using individual
+ * 1MB section mappings. This leaves the actual PMD potentially half
+ * initialized if the top or bottom section entry isn't used, leaving it
+ * open to problems if a subsequent ioremap() or vmalloc() tries to use
+ * the virtual space left free by that unused section entry.
+ *
+ * Let's avoid the issue by inserting dummy vm entries covering the unused
+ * PMD halves once the static mappings are in place.
+ */
+
+static void __init pmd_empty_section_gap(unsigned long addr)
+{
+ struct vm_struct *vm;
+
+ vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
+ vm->addr = (void *)addr;
+ vm->size = SECTION_SIZE;
+ vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
+ vm->caller = pmd_empty_section_gap;
+ vm_area_add_early(vm);
+}
+
+static void __init fill_pmd_gaps(void)
+{
+ struct vm_struct *vm;
+ unsigned long addr, next = 0;
+ pmd_t *pmd;
+
+ /* we're still single threaded hence no lock needed here */
+ for (vm = vmlist; vm; vm = vm->next) {
+ if (!(vm->flags & VM_ARM_STATIC_MAPPING))
+ continue;
+ addr = (unsigned long)vm->addr;
+ if (addr < next)
+ continue;
+
+ /*
+ * Check if this vm starts on an odd section boundary.
+ * If so and the first section entry for this PMD is free
+ * then we block the corresponding virtual address.
+ */
+ if ((addr & ~PMD_MASK) == SECTION_SIZE) {
+ pmd = pmd_off_k(addr);
+ if (pmd_none(*pmd))
+ pmd_empty_section_gap(addr & PMD_MASK);
+ }
+
+ /*
+ * Then check if this vm ends on an odd section boundary.
+ * If so and the second section entry for this PMD is empty
+ * then we block the corresponding virtual address.
+ */
+ addr += vm->size;
+ if ((addr & ~PMD_MASK) == SECTION_SIZE) {
+ pmd = pmd_off_k(addr) + 1;
+ if (pmd_none(*pmd))
+ pmd_empty_section_gap(addr);
+ }
+
+ /* no need to look at any vm entry until we hit the next PMD */
+ next = (addr + PMD_SIZE - 1) & PMD_MASK;
+ }
+}
+
+#else
+#define fill_pmd_gaps() do { } while (0)
+#endif
+
static void * __initdata vmalloc_min =
(void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
@@ -1072,6 +1145,7 @@
*/
if (mdesc->map_io)
mdesc->map_io();
+ fill_pmd_gaps();
/*
* Finally flush the caches and tlb to ensure that we're in a
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index 62135849..c641fb6 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -762,6 +762,11 @@
update_on_xread(ctx);
emit(ARM_MOV_R(r_A, r_X), ctx);
break;
+ case BPF_S_ANC_ALU_XOR_X:
+ /* A ^= X */
+ update_on_xread(ctx);
+ emit(ARM_EOR_R(r_A, r_A, r_X), ctx);
+ break;
case BPF_S_ANC_PROTOCOL:
/* A = ntohs(skb->protocol) */
ctx->seen |= SEEN_SKB;
diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h
index 99ae5e3..7fa2f7d 100644
--- a/arch/arm/net/bpf_jit_32.h
+++ b/arch/arm/net/bpf_jit_32.h
@@ -68,6 +68,8 @@
#define ARM_INST_CMP_R 0x01500000
#define ARM_INST_CMP_I 0x03500000
+#define ARM_INST_EOR_R 0x00200000
+
#define ARM_INST_LDRB_I 0x05d00000
#define ARM_INST_LDRB_R 0x07d00000
#define ARM_INST_LDRH_I 0x01d000b0
@@ -132,6 +134,8 @@
#define ARM_CMP_R(rn, rm) _AL3_R(ARM_INST_CMP, 0, rn, rm)
#define ARM_CMP_I(rn, imm) _AL3_I(ARM_INST_CMP, 0, rn, imm)
+#define ARM_EOR_R(rd, rn, rm) _AL3_R(ARM_INST_EOR, rd, rn, rm)
+
#define ARM_LDR_I(rt, rn, off) (ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \
| (off))
#define ARM_LDRB_I(rt, rn, off) (ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \
diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/plat-mxc/3ds_debugboard.c
index 5cac2c5..5c10ad0 100644
--- a/arch/arm/plat-mxc/3ds_debugboard.c
+++ b/arch/arm/plat-mxc/3ds_debugboard.c
@@ -12,9 +12,11 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/module.h>
#include <linux/smsc911x.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
@@ -48,27 +50,22 @@
/* CPU ID and Personality ID */
#define MCU_BOARD_ID_REG 0x68
-#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_GPIO(irq) ((irq) - MXC_INTERNAL_IRQS)
-
-#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
#define MXC_MAX_EXP_IO_LINES 16
/* interrupts like external uart , external ethernet etc*/
-#define EXPIO_INT_ENET (MXC_BOARD_IRQ_START + 0)
-#define EXPIO_INT_XUART_A (MXC_BOARD_IRQ_START + 1)
-#define EXPIO_INT_XUART_B (MXC_BOARD_IRQ_START + 2)
-#define EXPIO_INT_BUTTON_A (MXC_BOARD_IRQ_START + 3)
-#define EXPIO_INT_BUTTON_B (MXC_BOARD_IRQ_START + 4)
+#define EXPIO_INT_ENET 0
+#define EXPIO_INT_XUART_A 1
+#define EXPIO_INT_XUART_B 2
+#define EXPIO_INT_BUTTON_A 3
+#define EXPIO_INT_BUTTON_B 4
static void __iomem *brd_io;
+static struct irq_domain *domain;
static struct resource smsc911x_resources[] = {
{
.flags = IORESOURCE_MEM,
} , {
- .start = EXPIO_INT_ENET,
- .end = EXPIO_INT_ENET,
.flags = IORESOURCE_IRQ,
},
};
@@ -100,11 +97,11 @@
imr_val = __raw_readw(brd_io + INTR_MASK_REG);
int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
- expio_irq = MXC_BOARD_IRQ_START;
+ expio_irq = 0;
for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
if ((int_valid & 1) == 0)
continue;
- generic_handle_irq(expio_irq);
+ generic_handle_irq(irq_find_mapping(domain, expio_irq));
}
desc->irq_data.chip->irq_ack(&desc->irq_data);
@@ -118,7 +115,7 @@
static void expio_mask_irq(struct irq_data *d)
{
u16 reg;
- u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+ u32 expio = d->hwirq;
reg = __raw_readw(brd_io + INTR_MASK_REG);
reg |= (1 << expio);
@@ -127,7 +124,7 @@
static void expio_ack_irq(struct irq_data *d)
{
- u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+ u32 expio = d->hwirq;
__raw_writew(1 << expio, brd_io + INTR_RESET_REG);
__raw_writew(0, brd_io + INTR_RESET_REG);
@@ -137,7 +134,7 @@
static void expio_unmask_irq(struct irq_data *d)
{
u16 reg;
- u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+ u32 expio = d->hwirq;
reg = __raw_readw(brd_io + INTR_MASK_REG);
reg &= ~(1 << expio);
@@ -155,8 +152,10 @@
REGULATOR_SUPPLY("vddvario", "smsc911x"),
};
-int __init mxc_expio_init(u32 base, u32 p_irq)
+int __init mxc_expio_init(u32 base, u32 intr_gpio)
{
+ u32 p_irq = gpio_to_irq(intr_gpio);
+ int irq_base;
int i;
brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K);
@@ -178,16 +177,23 @@
/*
* Configure INT line as GPIO input
*/
- gpio_request(MXC_IRQ_TO_GPIO(p_irq), "expio_pirq");
- gpio_direction_input(MXC_IRQ_TO_GPIO(p_irq));
+ gpio_request(intr_gpio, "expio_pirq");
+ gpio_direction_input(intr_gpio);
/* disable the interrupt and clear the status */
__raw_writew(0, brd_io + INTR_MASK_REG);
__raw_writew(0xFFFF, brd_io + INTR_RESET_REG);
__raw_writew(0, brd_io + INTR_RESET_REG);
__raw_writew(0x1F, brd_io + INTR_MASK_REG);
- for (i = MXC_EXP_IO_BASE;
- i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); i++) {
+
+ irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
+ WARN_ON(irq_base < 0);
+
+ domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+ WARN_ON(!domain);
+
+ for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
@@ -199,6 +205,8 @@
smsc911x_resources[0].start = LAN9217_BASE_ADDR(base);
smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1;
+ smsc911x_resources[1].start = irq_find_mapping(domain, EXPIO_INT_ENET);
+ smsc911x_resources[1].end = irq_find_mapping(domain, EXPIO_INT_ENET);
platform_device_register(&smsc_lan9217_device);
return 0;
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index e81290c..63b064b 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -16,6 +16,7 @@
obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
ifdef CONFIG_SND_IMX_SOC
obj-y += ssi-fiq.o
obj-y += ssi-fiq-ksym.o
diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c
index 689f81f..cbd55c3 100644
--- a/arch/arm/plat-mxc/avic.c
+++ b/arch/arm/plat-mxc/avic.c
@@ -19,11 +19,14 @@
#include <linux/module.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/io.h>
+#include <linux/of.h>
#include <mach/common.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include "irq-common.h"
@@ -50,15 +53,19 @@
#define AVIC_NUM_IRQS 64
void __iomem *avic_base;
+static struct irq_domain *domain;
static u32 avic_saved_mask_reg[2];
#ifdef CONFIG_MXC_IRQ_PRIOR
static int avic_irq_set_priority(unsigned char irq, unsigned char prio)
{
+ struct irq_data *d = irq_get_irq_data(irq);
unsigned int temp;
unsigned int mask = 0x0F << irq % 8 * 4;
+ irq = d->hwirq;
+
if (irq >= AVIC_NUM_IRQS)
return -EINVAL;
@@ -75,8 +82,11 @@
#ifdef CONFIG_FIQ
static int avic_set_irq_fiq(unsigned int irq, unsigned int type)
{
+ struct irq_data *d = irq_get_irq_data(irq);
unsigned int irqt;
+ irq = d->hwirq;
+
if (irq >= AVIC_NUM_IRQS)
return -EINVAL;
@@ -108,7 +118,7 @@
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct irq_chip_type *ct = gc->chip_types;
- int idx = gc->irq_base >> 5;
+ int idx = d->hwirq >> 5;
avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask);
__raw_writel(gc->wake_active, avic_base + ct->regs.mask);
@@ -118,7 +128,7 @@
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct irq_chip_type *ct = gc->chip_types;
- int idx = gc->irq_base >> 5;
+ int idx = d->hwirq >> 5;
__raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask);
}
@@ -128,11 +138,10 @@
#define avic_irq_resume NULL
#endif
-static __init void avic_init_gc(unsigned int irq_start)
+static __init void avic_init_gc(int idx, unsigned int irq_start)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
- int idx = irq_start >> 5;
gc = irq_alloc_generic_chip("mxc-avic", 1, irq_start, avic_base,
handle_level_irq);
@@ -161,7 +170,7 @@
if (nivector == 0xffff)
break;
- handle_IRQ(nivector, regs);
+ handle_IRQ(irq_find_mapping(domain, nivector), regs);
} while (1);
}
@@ -172,6 +181,8 @@
*/
void __init mxc_init_irq(void __iomem *irqbase)
{
+ struct device_node *np;
+ int irq_base;
int i;
avic_base = irqbase;
@@ -190,8 +201,16 @@
__raw_writel(0, avic_base + AVIC_INTTYPEH);
__raw_writel(0, avic_base + AVIC_INTTYPEL);
- for (i = 0; i < AVIC_NUM_IRQS; i += 32)
- avic_init_gc(i);
+ irq_base = irq_alloc_descs(-1, 0, AVIC_NUM_IRQS, numa_node_id());
+ WARN_ON(irq_base < 0);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,avic");
+ domain = irq_domain_add_legacy(np, AVIC_NUM_IRQS, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+ WARN_ON(!domain);
+
+ for (i = 0; i < AVIC_NUM_IRQS / 32; i++, irq_base += 32)
+ avic_init_gc(i, irq_base);
/* Set default priority value (0) for all IRQ's */
for (i = 0; i < 8; i++)
@@ -199,7 +218,7 @@
#ifdef CONFIG_FIQ
/* Initialize FIQ */
- init_FIQ();
+ init_FIQ(FIQ_START);
#endif
printk(KERN_INFO "MXC IRQ initialized\n");
diff --git a/arch/arm/plat-mxc/cpuidle.c b/arch/arm/plat-mxc/cpuidle.c
new file mode 100644
index 0000000..d4cb511
--- /dev/null
+++ b/arch/arm/plat-mxc/cpuidle.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/cpuidle.h>
+#include <linux/err.h>
+#include <linux/hrtimer.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+static struct cpuidle_device __percpu * imx_cpuidle_devices;
+
+static void __init imx_cpuidle_devices_uninit(void)
+{
+ int cpu_id;
+ struct cpuidle_device *dev;
+
+ for_each_possible_cpu(cpu_id) {
+ dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id);
+ cpuidle_unregister_device(dev);
+ }
+
+ free_percpu(imx_cpuidle_devices);
+}
+
+int __init imx_cpuidle_init(struct cpuidle_driver *drv)
+{
+ struct cpuidle_device *dev;
+ int cpu_id, ret;
+
+ if (drv->state_count > CPUIDLE_STATE_MAX) {
+ pr_err("%s: state_count exceeds maximum\n", __func__);
+ return -EINVAL;
+ }
+
+ ret = cpuidle_register_driver(drv);
+ if (ret) {
+ pr_err("%s: Failed to register cpuidle driver with error: %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ imx_cpuidle_devices = alloc_percpu(struct cpuidle_device);
+ if (imx_cpuidle_devices == NULL) {
+ ret = -ENOMEM;
+ goto unregister_drv;
+ }
+
+ /* initialize state data for each cpuidle_device */
+ for_each_possible_cpu(cpu_id) {
+ dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id);
+ dev->cpu = cpu_id;
+ dev->state_count = drv->state_count;
+
+ ret = cpuidle_register_device(dev);
+ if (ret) {
+ pr_err("%s: Failed to register cpu %u, error: %d\n",
+ __func__, cpu_id, ret);
+ goto uninit;
+ }
+ }
+
+ return 0;
+
+uninit:
+ imx_cpuidle_devices_uninit();
+
+unregister_drv:
+ cpuidle_unregister_driver(drv);
+ return ret;
+}
diff --git a/arch/arm/plat-mxc/devices/platform-ipu-core.c b/arch/arm/plat-mxc/devices/platform-ipu-core.c
index 79d340a..d1e33cc 100644
--- a/arch/arm/plat-mxc/devices/platform-ipu-core.c
+++ b/arch/arm/plat-mxc/devices/platform-ipu-core.c
@@ -30,8 +30,7 @@
static struct platform_device *imx_ipu_coredev __initdata;
struct platform_device *__init imx_add_ipu_core(
- const struct imx_ipu_core_data *data,
- const struct ipu_platform_data *pdata)
+ const struct imx_ipu_core_data *data)
{
/* The resource order is important! */
struct resource res[] = {
@@ -55,7 +54,7 @@
};
return imx_ipu_coredev = imx_add_platform_device("ipu-core", -1,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+ res, ARRAY_SIZE(res), NULL, 0);
}
struct platform_device *__init imx_alloc_mx3_camera(
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_rtc.c b/arch/arm/plat-mxc/devices/platform-mxc_rtc.c
index 16d0ec4..a5c9ad5 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc_rtc.c
+++ b/arch/arm/plat-mxc/devices/platform-mxc_rtc.c
@@ -20,6 +20,11 @@
imx_mxc_rtc_data_entry_single(MX31);
#endif /* ifdef CONFIG_SOC_IMX31 */
+#ifdef CONFIG_SOC_IMX35
+const struct imx_mxc_rtc_data imx35_mxc_rtc_data __initconst =
+ imx_mxc_rtc_data_entry_single(MX35);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
struct platform_device *__init imx_add_mxc_rtc(
const struct imx_mxc_rtc_data *data)
{
diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
index 9bfae8b..9c50c14 100644
--- a/arch/arm/plat-mxc/devices/platform-spi_imx.c
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -95,7 +95,7 @@
#ifdef CONFIG_SOC_IMX53
/* i.mx53 has the i.mx35 type cspi */
const struct imx_spi_imx_data imx53_cspi_data __initconst =
- imx_spi_imx_data_entry_single(MX53, CSPI, "imx35-cspi", 0, , SZ_4K);
+ imx_spi_imx_data_entry_single(MX53, CSPI, "imx35-cspi", 2, , SZ_4K);
/* i.mx53 has the i.mx51 type ecspi */
const struct imx_spi_imx_data imx53_ecspi_data[] __initconst = {
diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
index 9129c9e..88726f4 100644
--- a/arch/arm/plat-mxc/epit.c
+++ b/arch/arm/plat-mxc/epit.c
@@ -50,6 +50,7 @@
#include <linux/irq.h>
#include <linux/clockchips.h>
#include <linux/clk.h>
+#include <linux/err.h>
#include <mach/hardware.h>
#include <asm/mach/time.h>
@@ -201,8 +202,16 @@
return 0;
}
-void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
+void __init epit_timer_init(void __iomem *base, int irq)
{
+ struct clk *timer_clk;
+
+ timer_clk = clk_get_sys("imx-epit.0", NULL);
+ if (IS_ERR(timer_clk)) {
+ pr_err("i.MX epit: unable to get clk\n");
+ return;
+ }
+
clk_prepare_enable(timer_clk);
timer_base = base;
diff --git a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h
index a384fdd..9fd6cb3 100644
--- a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h
+++ b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h
@@ -13,6 +13,6 @@
#ifndef __ASM_ARCH_MXC_3DS_DB_H__
#define __ASM_ARCH_MXC_3DS_DB_H__
-extern int __init mxc_expio_init(u32 base, u32 p_irq);
+extern int __init mxc_expio_init(u32 base, u32 intr_gpio);
#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index cf663d8..7128e97 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -54,8 +54,9 @@
extern void imx51_soc_init(void);
extern void imx53_soc_init(void);
extern void imx51_init_late(void);
-extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
-extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
+extern void imx53_init_late(void);
+extern void epit_timer_init(void __iomem *base, int irq);
+extern void mxc_timer_init(void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
extern int mx25_clocks_init(void);
@@ -67,6 +68,7 @@
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
extern int mx27_clocks_init_dt(void);
+extern int mx31_clocks_init_dt(void);
extern int mx51_clocks_init_dt(void);
extern int mx53_clocks_init_dt(void);
extern int mx6q_clocks_init(void);
@@ -95,7 +97,6 @@
};
extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
-extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
extern void imx_print_silicon_rev(const char *cpu, int srev);
void avic_handle_irq(struct pt_regs *);
@@ -146,8 +147,12 @@
#ifdef CONFIG_PM
extern void imx6q_pm_init(void);
+extern void imx51_pm_init(void);
+extern void imx53_pm_init(void);
#else
static inline void imx6q_pm_init(void) {}
+static inline void imx51_pm_init(void) {}
+static inline void imx53_pm_init(void) {}
#endif
#ifdef CONFIG_NEON
diff --git a/arch/arm/plat-mxc/include/mach/cpuidle.h b/arch/arm/plat-mxc/include/mach/cpuidle.h
new file mode 100644
index 0000000..bc932d1
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/cpuidle.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/cpuidle.h>
+
+#ifdef CONFIG_CPU_IDLE
+extern int imx_cpuidle_init(struct cpuidle_driver *drv);
+#else
+static inline int imx_cpuidle_init(struct cpuidle_driver *drv)
+{
+ return -ENODEV;
+}
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index 1b2258d..a7f5bb1 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -183,7 +183,6 @@
const struct imx_imx_udc_data *data,
const struct imxusb_platform_data *pdata);
-#include <mach/ipu.h>
#include <mach/mx3fb.h>
#include <mach/mx3_camera.h>
struct imx_ipu_core_data {
@@ -192,8 +191,7 @@
resource_size_t errirq;
};
struct platform_device *__init imx_add_ipu_core(
- const struct imx_ipu_core_data *data,
- const struct ipu_platform_data *pdata);
+ const struct imx_ipu_core_data *data);
struct platform_device *__init imx_alloc_mx3_camera(
const struct imx_ipu_core_data *data,
const struct mx3_camera_pdata *pdata);
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 0630513..ebf1065 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -50,7 +50,7 @@
* IO 0x00200000+0x100000 -> 0xf4000000+0x100000
* mx21:
* AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000
- * SAHB1 0x80000000+0x100000 -> 0xf4000000+0x100000
+ * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000
* X_MEMC 0xdf000000+0x004000 -> 0xf5f00000+0x004000
* mx25:
* AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
@@ -58,47 +58,50 @@
* AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
* mx27:
* AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000
- * SAHB1 0x80000000+0x100000 -> 0xf4000000+0x100000
+ * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000
* X_MEMC 0xd8000000+0x100000 -> 0xf5c00000+0x100000
* mx31:
* AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
* AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
* AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
- * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000
+ * X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000
* SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
* mx35:
* AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
* AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
* AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
- * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000
+ * X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000
* SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
* mx50:
* TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
- * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
* AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
* mx51:
- * TZIC 0xe0000000+0x004000 -> 0xf5000000+0x004000
+ * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
* IRAM 0x1ffe0000+0x020000 -> 0xf4fe0000+0x020000
+ * DEBUG 0x60000000+0x100000 -> 0xf5000000+0x100000
* SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000
- * AIPS2 0x83f00000+0x100000 -> 0xf4300000+0x100000
+ * AIPS2 0x83f00000+0x100000 -> 0xf5300000+0x100000
* mx53:
* TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
+ * DEBUG 0x40000000+0x100000 -> 0xf5000000+0x100000
* SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000
* AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
* mx6q:
- * SCU 0x00a00000+0x001000 -> 0xf4000000+0x001000
+ * SCU 0x00a00000+0x004000 -> 0xf4000000+0x004000
* CCM 0x020c4000+0x004000 -> 0xf42c4000+0x004000
- * ANATOP 0x020c8000+0x001000 -> 0xf42c8000+0x001000
+ * ANATOP 0x020c8000+0x004000 -> 0xf42c8000+0x004000
* UART4 0x021f0000+0x004000 -> 0xf42f0000+0x004000
*/
#define IMX_IO_P2V(x) ( \
- 0xf4000000 + \
+ (((x) & 0x80000000) >> 7) | \
+ (0xf4000000 + \
(((x) & 0x50000000) >> 6) + \
(((x) & 0x0b000000) >> 4) + \
- (((x) & 0x000fffff)))
+ (((x) & 0x000fffff))))
#define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x))
@@ -128,6 +131,4 @@
/* range e.g. GPIO_1_5 is gpio 5 under linux */
#define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr))
-#define IMX_GPIO_TO_IRQ(gpio) (MXC_GPIO_IRQ_START + (gpio))
-
#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 63f22a0..d8b65b5 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -160,9 +160,6 @@
#define IOMUX_TO_GPIO(iomux_pin) \
((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT)
-#define IOMUX_TO_IRQ(iomux_pin) \
- (((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \
- MXC_GPIO_IRQ_START)
/*
* This enumeration is constructed based on the Section
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index 36c8989..2623e7a 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -107,11 +107,13 @@
#define MX51_PAD_EIM_D25__UART2_CTS IOMUX_PAD(0x414, 0x080, 4, __NA_, 0, MX51_UART_PAD_CTRL)
#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART_PAD_CTRL)
#define MX51_PAD_EIM_D25__USBOTG_DATA1 IOMUX_PAD(0x414, 0x080, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D25__GPT_CMPOUT1 IOMUX_PAD(0x414, 0x080, 5, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_D26__EIM_D26 IOMUX_PAD(0x418, 0x084, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_D26__KEY_COL7 IOMUX_PAD(0x418, 0x084, 1, 0x9cc, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_D26__UART2_RTS IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART_PAD_CTRL)
#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, 3, __NA_, 0, MX51_UART_PAD_CTRL)
#define MX51_PAD_EIM_D26__USBOTG_DATA2 IOMUX_PAD(0x418, 0x084, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D26__GPT_CMPOUT2 IOMUX_PAD(0x418, 0x084, 5, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_D27__AUD6_RXC IOMUX_PAD(0x41c, 0x088, 5, 0x8f4, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_D27__EIM_D27 IOMUX_PAD(0x41c, 0x088, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_D27__GPIO2_9 IOMUX_PAD(0x41c, 0x088, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
@@ -228,6 +230,7 @@
#define MX51_PAD_EIM_CRE__EIM_CRE IOMUX_PAD(0x4a0, 0x100, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_CRE__GPIO3_2 IOMUX_PAD(0x4a0, 0x100, 1, 0x97c, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4d0, 0x104, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DRAM_CS1__CCM_CLKO IOMUX_PAD(0x4d0, 0x104, 1, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_WE_B__GPIO3_3 IOMUX_PAD(0x4e4, 0x108, 3, 0x980, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_NANDF_WE_B__NANDF_WE_B IOMUX_PAD(0x4e4, 0x108, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_WE_B__PATA_DIOW IOMUX_PAD(0x4e4, 0x108, 1, __NA_, 0, NO_PAD_CTRL)
@@ -256,12 +259,14 @@
#define MX51_PAD_NANDF_RB1__GPIO3_9 IOMUX_PAD(0x4fc, 0x120, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_NANDF_RB1__NANDF_RB1 IOMUX_PAD(0x4fc, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_RB1__PATA_IORDY IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__GPT_CMPOUT2 IOMUX_PAD(0x4fc, 0x120, 4, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL)
#define MX51_PAD_NANDF_RB2__DISP2_WAIT IOMUX_PAD(0x500, 0x124, 5, 0x9a8, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
#define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2)
#define MX51_PAD_NANDF_RB2__GPIO3_10 IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_NANDF_RB2__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__GPT_CMPOUT3 IOMUX_PAD(0x500, 0x124, 4, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 0x17, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_RB2__USBH3_NXT IOMUX_PAD(0x500, 0x124, 6, 0xa20, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_RB3__DISP1_WAIT IOMUX_PAD(0x504, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
@@ -637,7 +642,9 @@
#define MX51_PAD_DISP1_DAT23__DISP2_DAT17 IOMUX_PAD(0x728, 0x328, 5, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS IOMUX_PAD(0x728, 0x328, 4, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72c, 0x32c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_DISP_CLK__DI1_DISP_CLK IOMUX_PAD(0x730, __NA_, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN15__DI1_PIN15 IOMUX_PAD(0x738, __NA_, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_DI_GP2__DISP1_SER_CLK IOMUX_PAD(0x740, 0x338, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_DI_GP2__DISP2_WAIT IOMUX_PAD(0x740, 0x338, 2, 0x9a8, 1, NO_PAD_CTRL)
#define MX51_PAD_DI_GP3__CSI1_DATA_EN IOMUX_PAD(0x744, 0x33c, 3, 0x9a0, 1, NO_PAD_CTRL)
@@ -780,6 +787,8 @@
#define MX51_PAD_GPIO1_2__PWM1_PWMO IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO1_3__I2C2_SDA IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x9bc, 3, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_GPIO1_3__CCM_CLKO2 IOMUX_PAD(0x7d8, 0x3d0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_3__GPT_CLKIN IOMUX_PAD(0x7d8, 0x3d0, 6, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_3__PLL2_BYP IOMUX_PAD(0x7d8, 0x3d0, 7, 0x910, 1, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_3__PWM2_PWMO IOMUX_PAD(0x7d8, 0x3d0, 1, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7fc, 0x3d4, 0, __NA_, 0, NO_PAD_CTRL)
@@ -788,13 +797,16 @@
#define MX51_PAD_GPIO1_4__EIM_RDY IOMUX_PAD(0x804, 0x3d8, 3, 0x938, 1, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B IOMUX_PAD(0x804, 0x3d8, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_4__GPT_CAPIN1 IOMUX_PAD(0x804, 0x3d8, 6, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_5__CSI2_MCLK IOMUX_PAD(0x808, 0x3dc, 6, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_5__DISP2_PIN16 IOMUX_PAD(0x808, 0x3dc, 3, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B IOMUX_PAD(0x808, 0x3dc, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_5__CCM_CLKO IOMUX_PAD(0x808, 0x3dc, 5, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_6__DISP2_PIN17 IOMUX_PAD(0x80c, 0x3e0, 4, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO1_6__REF_EN_B IOMUX_PAD(0x80c, 0x3e0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_6__GPT_CAPIN2 IOMUX_PAD(0x80c, 0x3e0, 6, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_7__CCM_OUT_0 IOMUX_PAD(0x810, 0x3e4, 3, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO1_7__SD2_WP IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
@@ -803,11 +815,13 @@
#define MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO1_8__SD2_CD IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
#define MX51_PAD_GPIO1_8__USBH3_PWR IOMUX_PAD(0x814, 0x3e8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_8__CCM_CLKO2 IOMUX_PAD(0x814, 0x3e8, 4, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_9__CCM_OUT_1 IOMUX_PAD(0x818, 0x3ec, 3, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_9__DISP2_D1_CS IOMUX_PAD(0x818, 0x3ec, 2, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_9__DISP2_SER_CS IOMUX_PAD(0x818, 0x3ec, 7, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO1_9__SD2_LCTL IOMUX_PAD(0x818, 0x3ec, 6, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_9__USBH3_OC IOMUX_PAD(0x818, 0x3ec, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_9__CCM_CLKO IOMUX_PAD(0x818, 0x3ec, 4, __NA_, 0, NO_PAD_CTRL)
#endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h
index f7d1804..02651a4 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v1.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h
@@ -85,13 +85,6 @@
#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT)
#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT)
-#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x)
-#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
-#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x)
-#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x)
-
extern int mxc_gpio_mode(int gpio_mode);
extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
const char *label);
diff --git a/arch/arm/plat-mxc/include/mach/ipu.h b/arch/arm/plat-mxc/include/mach/ipu.h
index a9221f1..539e559 100644
--- a/arch/arm/plat-mxc/include/mach/ipu.h
+++ b/arch/arm/plat-mxc/include/mach/ipu.h
@@ -110,10 +110,6 @@
IPU_ROTATE_90_LEFT = 7,
};
-struct ipu_platform_data {
- unsigned int irq_base;
-};
-
/*
* Enumeration of DI ports for ADC.
*/
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index fd9efb0..d73f5e8 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -11,50 +11,6 @@
#ifndef __ASM_ARCH_MXC_IRQS_H__
#define __ASM_ARCH_MXC_IRQS_H__
-#include <asm-generic/gpio.h>
-
-/*
- * SoCs with GIC interrupt controller have 160 IRQs, those with TZIC
- * have 128 IRQs, and those with AVIC have 64.
- *
- * To support single image, the biggest number should be defined on
- * top of the list.
- */
-#if defined CONFIG_ARM_GIC
-#define MXC_INTERNAL_IRQS 160
-#elif defined CONFIG_MXC_TZIC
-#define MXC_INTERNAL_IRQS 128
-#else
-#define MXC_INTERNAL_IRQS 64
-#endif
-
-#define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS
-
-/*
- * The next 16 interrupts are for board specific purposes. Since
- * the kernel can only run on one machine at a time, we can re-use
- * these. If you need more, increase MXC_BOARD_IRQS, but keep it
- * within sensible limits.
- */
-#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + ARCH_NR_GPIOS)
-
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-#define MXC_BOARD_IRQS 80
-#else
-#define MXC_BOARD_IRQS 16
-#endif
-
-#define MXC_IPU_IRQ_START (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
-
-#ifdef CONFIG_MX3_IPU_IRQS
-#define MX3_IPU_IRQS CONFIG_MX3_IPU_IRQS
-#else
-#define MX3_IPU_IRQS 0
-#endif
-/* REVISIT: Add IPU irqs on IMX51 */
-
-#define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS)
-
extern int imx_irq_set_priority(unsigned char irq, unsigned char prio);
/* all normal IRQs can be FIQs */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 2b7c08d..45bd31c 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -78,61 +78,62 @@
#define MX1_IO_ADDRESS(x) IOMEM(MX1_IO_P2V(x))
/* fixed interrput numbers */
-#define MX1_INT_SOFTINT 0
-#define MX1_INT_CSI 6
-#define MX1_DSPA_MAC_INT 7
-#define MX1_DSPA_INT 8
-#define MX1_COMP_INT 9
-#define MX1_MSHC_XINT 10
-#define MX1_GPIO_INT_PORTA 11
-#define MX1_GPIO_INT_PORTB 12
-#define MX1_GPIO_INT_PORTC 13
-#define MX1_INT_LCDC 14
-#define MX1_SIM_INT 15
-#define MX1_SIM_DATA_INT 16
-#define MX1_RTC_INT 17
-#define MX1_RTC_SAMINT 18
-#define MX1_INT_UART2PFERR 19
-#define MX1_INT_UART2RTS 20
-#define MX1_INT_UART2DTR 21
-#define MX1_INT_UART2UARTC 22
-#define MX1_INT_UART2TX 23
-#define MX1_INT_UART2RX 24
-#define MX1_INT_UART1PFERR 25
-#define MX1_INT_UART1RTS 26
-#define MX1_INT_UART1DTR 27
-#define MX1_INT_UART1UARTC 28
-#define MX1_INT_UART1TX 29
-#define MX1_INT_UART1RX 30
-#define MX1_VOICE_DAC_INT 31
-#define MX1_VOICE_ADC_INT 32
-#define MX1_PEN_DATA_INT 33
-#define MX1_PWM_INT 34
-#define MX1_SDHC_INT 35
-#define MX1_INT_I2C 39
-#define MX1_INT_CSPI2 40
-#define MX1_INT_CSPI1 41
-#define MX1_SSI_TX_INT 42
-#define MX1_SSI_TX_ERR_INT 43
-#define MX1_SSI_RX_INT 44
-#define MX1_SSI_RX_ERR_INT 45
-#define MX1_TOUCH_INT 46
-#define MX1_INT_USBD0 47
-#define MX1_INT_USBD1 48
-#define MX1_INT_USBD2 49
-#define MX1_INT_USBD3 50
-#define MX1_INT_USBD4 51
-#define MX1_INT_USBD5 52
-#define MX1_INT_USBD6 53
-#define MX1_BTSYS_INT 55
-#define MX1_BTTIM_INT 56
-#define MX1_BTWUI_INT 57
-#define MX1_TIM2_INT 58
-#define MX1_TIM1_INT 59
-#define MX1_DMA_ERR 60
-#define MX1_DMA_INT 61
-#define MX1_GPIO_INT_PORTD 62
-#define MX1_WDT_INT 63
+#include <asm/irq.h>
+#define MX1_INT_SOFTINT (NR_IRQS_LEGACY + 0)
+#define MX1_INT_CSI (NR_IRQS_LEGACY + 6)
+#define MX1_DSPA_MAC_INT (NR_IRQS_LEGACY + 7)
+#define MX1_DSPA_INT (NR_IRQS_LEGACY + 8)
+#define MX1_COMP_INT (NR_IRQS_LEGACY + 9)
+#define MX1_MSHC_XINT (NR_IRQS_LEGACY + 10)
+#define MX1_GPIO_INT_PORTA (NR_IRQS_LEGACY + 11)
+#define MX1_GPIO_INT_PORTB (NR_IRQS_LEGACY + 12)
+#define MX1_GPIO_INT_PORTC (NR_IRQS_LEGACY + 13)
+#define MX1_INT_LCDC (NR_IRQS_LEGACY + 14)
+#define MX1_SIM_INT (NR_IRQS_LEGACY + 15)
+#define MX1_SIM_DATA_INT (NR_IRQS_LEGACY + 16)
+#define MX1_RTC_INT (NR_IRQS_LEGACY + 17)
+#define MX1_RTC_SAMINT (NR_IRQS_LEGACY + 18)
+#define MX1_INT_UART2PFERR (NR_IRQS_LEGACY + 19)
+#define MX1_INT_UART2RTS (NR_IRQS_LEGACY + 20)
+#define MX1_INT_UART2DTR (NR_IRQS_LEGACY + 21)
+#define MX1_INT_UART2UARTC (NR_IRQS_LEGACY + 22)
+#define MX1_INT_UART2TX (NR_IRQS_LEGACY + 23)
+#define MX1_INT_UART2RX (NR_IRQS_LEGACY + 24)
+#define MX1_INT_UART1PFERR (NR_IRQS_LEGACY + 25)
+#define MX1_INT_UART1RTS (NR_IRQS_LEGACY + 26)
+#define MX1_INT_UART1DTR (NR_IRQS_LEGACY + 27)
+#define MX1_INT_UART1UARTC (NR_IRQS_LEGACY + 28)
+#define MX1_INT_UART1TX (NR_IRQS_LEGACY + 29)
+#define MX1_INT_UART1RX (NR_IRQS_LEGACY + 30)
+#define MX1_VOICE_DAC_INT (NR_IRQS_LEGACY + 31)
+#define MX1_VOICE_ADC_INT (NR_IRQS_LEGACY + 32)
+#define MX1_PEN_DATA_INT (NR_IRQS_LEGACY + 33)
+#define MX1_PWM_INT (NR_IRQS_LEGACY + 34)
+#define MX1_SDHC_INT (NR_IRQS_LEGACY + 35)
+#define MX1_INT_I2C (NR_IRQS_LEGACY + 39)
+#define MX1_INT_CSPI2 (NR_IRQS_LEGACY + 40)
+#define MX1_INT_CSPI1 (NR_IRQS_LEGACY + 41)
+#define MX1_SSI_TX_INT (NR_IRQS_LEGACY + 42)
+#define MX1_SSI_TX_ERR_INT (NR_IRQS_LEGACY + 43)
+#define MX1_SSI_RX_INT (NR_IRQS_LEGACY + 44)
+#define MX1_SSI_RX_ERR_INT (NR_IRQS_LEGACY + 45)
+#define MX1_TOUCH_INT (NR_IRQS_LEGACY + 46)
+#define MX1_INT_USBD0 (NR_IRQS_LEGACY + 47)
+#define MX1_INT_USBD1 (NR_IRQS_LEGACY + 48)
+#define MX1_INT_USBD2 (NR_IRQS_LEGACY + 49)
+#define MX1_INT_USBD3 (NR_IRQS_LEGACY + 50)
+#define MX1_INT_USBD4 (NR_IRQS_LEGACY + 51)
+#define MX1_INT_USBD5 (NR_IRQS_LEGACY + 52)
+#define MX1_INT_USBD6 (NR_IRQS_LEGACY + 53)
+#define MX1_BTSYS_INT (NR_IRQS_LEGACY + 55)
+#define MX1_BTTIM_INT (NR_IRQS_LEGACY + 56)
+#define MX1_BTWUI_INT (NR_IRQS_LEGACY + 57)
+#define MX1_TIM2_INT (NR_IRQS_LEGACY + 58)
+#define MX1_TIM1_INT (NR_IRQS_LEGACY + 59)
+#define MX1_DMA_ERR (NR_IRQS_LEGACY + 60)
+#define MX1_DMA_INT (NR_IRQS_LEGACY + 61)
+#define MX1_GPIO_INT_PORTD (NR_IRQS_LEGACY + 62)
+#define MX1_WDT_INT (NR_IRQS_LEGACY + 63)
/* DMA */
#define MX1_DMA_REQ_UART3_T 2
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index 6cd049e..468738a 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -99,59 +99,60 @@
#define MX21_IO_ADDRESS(x) IOMEM(MX21_IO_P2V(x))
/* fixed interrupt numbers */
-#define MX21_INT_CSPI3 6
-#define MX21_INT_GPIO 8
-#define MX21_INT_FIRI 9
-#define MX21_INT_SDHC2 10
-#define MX21_INT_SDHC1 11
-#define MX21_INT_I2C 12
-#define MX21_INT_SSI2 13
-#define MX21_INT_SSI1 14
-#define MX21_INT_CSPI2 15
-#define MX21_INT_CSPI1 16
-#define MX21_INT_UART4 17
-#define MX21_INT_UART3 18
-#define MX21_INT_UART2 19
-#define MX21_INT_UART1 20
-#define MX21_INT_KPP 21
-#define MX21_INT_RTC 22
-#define MX21_INT_PWM 23
-#define MX21_INT_GPT3 24
-#define MX21_INT_GPT2 25
-#define MX21_INT_GPT1 26
-#define MX21_INT_WDOG 27
-#define MX21_INT_PCMCIA 28
-#define MX21_INT_NFC 29
-#define MX21_INT_BMI 30
-#define MX21_INT_CSI 31
-#define MX21_INT_DMACH0 32
-#define MX21_INT_DMACH1 33
-#define MX21_INT_DMACH2 34
-#define MX21_INT_DMACH3 35
-#define MX21_INT_DMACH4 36
-#define MX21_INT_DMACH5 37
-#define MX21_INT_DMACH6 38
-#define MX21_INT_DMACH7 39
-#define MX21_INT_DMACH8 40
-#define MX21_INT_DMACH9 41
-#define MX21_INT_DMACH10 42
-#define MX21_INT_DMACH11 43
-#define MX21_INT_DMACH12 44
-#define MX21_INT_DMACH13 45
-#define MX21_INT_DMACH14 46
-#define MX21_INT_DMACH15 47
-#define MX21_INT_EMMAENC 49
-#define MX21_INT_EMMADEC 50
-#define MX21_INT_EMMAPRP 51
-#define MX21_INT_EMMAPP 52
-#define MX21_INT_USBWKUP 53
-#define MX21_INT_USBDMA 54
-#define MX21_INT_USBHOST 55
-#define MX21_INT_USBFUNC 56
-#define MX21_INT_USBMNP 57
-#define MX21_INT_USBCTRL 58
-#define MX21_INT_SLCDC 60
-#define MX21_INT_LCDC 61
+#include <asm/irq.h>
+#define MX21_INT_CSPI3 (NR_IRQS_LEGACY + 6)
+#define MX21_INT_GPIO (NR_IRQS_LEGACY + 8)
+#define MX21_INT_FIRI (NR_IRQS_LEGACY + 9)
+#define MX21_INT_SDHC2 (NR_IRQS_LEGACY + 10)
+#define MX21_INT_SDHC1 (NR_IRQS_LEGACY + 11)
+#define MX21_INT_I2C (NR_IRQS_LEGACY + 12)
+#define MX21_INT_SSI2 (NR_IRQS_LEGACY + 13)
+#define MX21_INT_SSI1 (NR_IRQS_LEGACY + 14)
+#define MX21_INT_CSPI2 (NR_IRQS_LEGACY + 15)
+#define MX21_INT_CSPI1 (NR_IRQS_LEGACY + 16)
+#define MX21_INT_UART4 (NR_IRQS_LEGACY + 17)
+#define MX21_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX21_INT_UART2 (NR_IRQS_LEGACY + 19)
+#define MX21_INT_UART1 (NR_IRQS_LEGACY + 20)
+#define MX21_INT_KPP (NR_IRQS_LEGACY + 21)
+#define MX21_INT_RTC (NR_IRQS_LEGACY + 22)
+#define MX21_INT_PWM (NR_IRQS_LEGACY + 23)
+#define MX21_INT_GPT3 (NR_IRQS_LEGACY + 24)
+#define MX21_INT_GPT2 (NR_IRQS_LEGACY + 25)
+#define MX21_INT_GPT1 (NR_IRQS_LEGACY + 26)
+#define MX21_INT_WDOG (NR_IRQS_LEGACY + 27)
+#define MX21_INT_PCMCIA (NR_IRQS_LEGACY + 28)
+#define MX21_INT_NFC (NR_IRQS_LEGACY + 29)
+#define MX21_INT_BMI (NR_IRQS_LEGACY + 30)
+#define MX21_INT_CSI (NR_IRQS_LEGACY + 31)
+#define MX21_INT_DMACH0 (NR_IRQS_LEGACY + 32)
+#define MX21_INT_DMACH1 (NR_IRQS_LEGACY + 33)
+#define MX21_INT_DMACH2 (NR_IRQS_LEGACY + 34)
+#define MX21_INT_DMACH3 (NR_IRQS_LEGACY + 35)
+#define MX21_INT_DMACH4 (NR_IRQS_LEGACY + 36)
+#define MX21_INT_DMACH5 (NR_IRQS_LEGACY + 37)
+#define MX21_INT_DMACH6 (NR_IRQS_LEGACY + 38)
+#define MX21_INT_DMACH7 (NR_IRQS_LEGACY + 39)
+#define MX21_INT_DMACH8 (NR_IRQS_LEGACY + 40)
+#define MX21_INT_DMACH9 (NR_IRQS_LEGACY + 41)
+#define MX21_INT_DMACH10 (NR_IRQS_LEGACY + 42)
+#define MX21_INT_DMACH11 (NR_IRQS_LEGACY + 43)
+#define MX21_INT_DMACH12 (NR_IRQS_LEGACY + 44)
+#define MX21_INT_DMACH13 (NR_IRQS_LEGACY + 45)
+#define MX21_INT_DMACH14 (NR_IRQS_LEGACY + 46)
+#define MX21_INT_DMACH15 (NR_IRQS_LEGACY + 47)
+#define MX21_INT_EMMAENC (NR_IRQS_LEGACY + 49)
+#define MX21_INT_EMMADEC (NR_IRQS_LEGACY + 50)
+#define MX21_INT_EMMAPRP (NR_IRQS_LEGACY + 51)
+#define MX21_INT_EMMAPP (NR_IRQS_LEGACY + 52)
+#define MX21_INT_USBWKUP (NR_IRQS_LEGACY + 53)
+#define MX21_INT_USBDMA (NR_IRQS_LEGACY + 54)
+#define MX21_INT_USBHOST (NR_IRQS_LEGACY + 55)
+#define MX21_INT_USBFUNC (NR_IRQS_LEGACY + 56)
+#define MX21_INT_USBMNP (NR_IRQS_LEGACY + 57)
+#define MX21_INT_USBCTRL (NR_IRQS_LEGACY + 58)
+#define MX21_INT_SLCDC (NR_IRQS_LEGACY + 60)
+#define MX21_INT_LCDC (NR_IRQS_LEGACY + 61)
/* fixed DMA request numbers */
#define MX21_DMA_REQ_CSPI3_RX 1
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index ccebf5b..627d94f 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -61,40 +61,44 @@
#define MX25_IO_P2V(x) IMX_IO_P2V(x)
#define MX25_IO_ADDRESS(x) IOMEM(MX25_IO_P2V(x))
-#define MX25_INT_CSPI3 0
-#define MX25_INT_I2C1 3
-#define MX25_INT_I2C2 4
-#define MX25_INT_UART4 5
-#define MX25_INT_ESDHC2 8
-#define MX25_INT_ESDHC1 9
-#define MX25_INT_I2C3 10
-#define MX25_INT_SSI2 11
-#define MX25_INT_SSI1 12
-#define MX25_INT_CSPI2 13
-#define MX25_INT_CSPI1 14
-#define MX25_INT_GPIO3 16
-#define MX25_INT_CSI 17
-#define MX25_INT_UART3 18
-#define MX25_INT_GPIO4 23
-#define MX25_INT_KPP 24
-#define MX25_INT_DRYICE 25
-#define MX25_INT_PWM1 26
-#define MX25_INT_UART2 32
-#define MX25_INT_NFC 33
-#define MX25_INT_SDMA 34
-#define MX25_INT_USB_HS 35
-#define MX25_INT_PWM2 36
-#define MX25_INT_USB_OTG 37
-#define MX25_INT_LCDC 39
-#define MX25_INT_UART5 40
-#define MX25_INT_PWM3 41
-#define MX25_INT_PWM4 42
-#define MX25_INT_CAN1 43
-#define MX25_INT_CAN2 44
-#define MX25_INT_UART1 45
-#define MX25_INT_GPIO2 51
-#define MX25_INT_GPIO1 52
-#define MX25_INT_FEC 57
+/*
+ * Interrupt numbers
+ */
+#include <asm/irq.h>
+#define MX25_INT_CSPI3 (NR_IRQS_LEGACY + 0)
+#define MX25_INT_I2C1 (NR_IRQS_LEGACY + 3)
+#define MX25_INT_I2C2 (NR_IRQS_LEGACY + 4)
+#define MX25_INT_UART4 (NR_IRQS_LEGACY + 5)
+#define MX25_INT_ESDHC2 (NR_IRQS_LEGACY + 8)
+#define MX25_INT_ESDHC1 (NR_IRQS_LEGACY + 9)
+#define MX25_INT_I2C3 (NR_IRQS_LEGACY + 10)
+#define MX25_INT_SSI2 (NR_IRQS_LEGACY + 11)
+#define MX25_INT_SSI1 (NR_IRQS_LEGACY + 12)
+#define MX25_INT_CSPI2 (NR_IRQS_LEGACY + 13)
+#define MX25_INT_CSPI1 (NR_IRQS_LEGACY + 14)
+#define MX25_INT_GPIO3 (NR_IRQS_LEGACY + 16)
+#define MX25_INT_CSI (NR_IRQS_LEGACY + 17)
+#define MX25_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX25_INT_GPIO4 (NR_IRQS_LEGACY + 23)
+#define MX25_INT_KPP (NR_IRQS_LEGACY + 24)
+#define MX25_INT_DRYICE (NR_IRQS_LEGACY + 25)
+#define MX25_INT_PWM1 (NR_IRQS_LEGACY + 26)
+#define MX25_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX25_INT_NFC (NR_IRQS_LEGACY + 33)
+#define MX25_INT_SDMA (NR_IRQS_LEGACY + 34)
+#define MX25_INT_USB_HS (NR_IRQS_LEGACY + 35)
+#define MX25_INT_PWM2 (NR_IRQS_LEGACY + 36)
+#define MX25_INT_USB_OTG (NR_IRQS_LEGACY + 37)
+#define MX25_INT_LCDC (NR_IRQS_LEGACY + 39)
+#define MX25_INT_UART5 (NR_IRQS_LEGACY + 40)
+#define MX25_INT_PWM3 (NR_IRQS_LEGACY + 41)
+#define MX25_INT_PWM4 (NR_IRQS_LEGACY + 42)
+#define MX25_INT_CAN1 (NR_IRQS_LEGACY + 43)
+#define MX25_INT_CAN2 (NR_IRQS_LEGACY + 44)
+#define MX25_INT_UART1 (NR_IRQS_LEGACY + 45)
+#define MX25_INT_GPIO2 (NR_IRQS_LEGACY + 51)
+#define MX25_INT_GPIO1 (NR_IRQS_LEGACY + 52)
+#define MX25_INT_FEC (NR_IRQS_LEGACY + 57)
#define MX25_DMA_REQ_SSI2_RX1 22
#define MX25_DMA_REQ_SSI2_TX1 23
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 6265357..e074616 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -128,69 +128,70 @@
#define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x))
/* fixed interrupt numbers */
-#define MX27_INT_I2C2 1
-#define MX27_INT_GPT6 2
-#define MX27_INT_GPT5 3
-#define MX27_INT_GPT4 4
-#define MX27_INT_RTIC 5
-#define MX27_INT_CSPI3 6
-#define MX27_INT_SDHC 7
-#define MX27_INT_GPIO 8
-#define MX27_INT_SDHC3 9
-#define MX27_INT_SDHC2 10
-#define MX27_INT_SDHC1 11
-#define MX27_INT_I2C1 12
-#define MX27_INT_SSI2 13
-#define MX27_INT_SSI1 14
-#define MX27_INT_CSPI2 15
-#define MX27_INT_CSPI1 16
-#define MX27_INT_UART4 17
-#define MX27_INT_UART3 18
-#define MX27_INT_UART2 19
-#define MX27_INT_UART1 20
-#define MX27_INT_KPP 21
-#define MX27_INT_RTC 22
-#define MX27_INT_PWM 23
-#define MX27_INT_GPT3 24
-#define MX27_INT_GPT2 25
-#define MX27_INT_GPT1 26
-#define MX27_INT_WDOG 27
-#define MX27_INT_PCMCIA 28
-#define MX27_INT_NFC 29
-#define MX27_INT_ATA 30
-#define MX27_INT_CSI 31
-#define MX27_INT_DMACH0 32
-#define MX27_INT_DMACH1 33
-#define MX27_INT_DMACH2 34
-#define MX27_INT_DMACH3 35
-#define MX27_INT_DMACH4 36
-#define MX27_INT_DMACH5 37
-#define MX27_INT_DMACH6 38
-#define MX27_INT_DMACH7 39
-#define MX27_INT_DMACH8 40
-#define MX27_INT_DMACH9 41
-#define MX27_INT_DMACH10 42
-#define MX27_INT_DMACH11 43
-#define MX27_INT_DMACH12 44
-#define MX27_INT_DMACH13 45
-#define MX27_INT_DMACH14 46
-#define MX27_INT_DMACH15 47
-#define MX27_INT_UART6 48
-#define MX27_INT_UART5 49
-#define MX27_INT_FEC 50
-#define MX27_INT_EMMAPRP 51
-#define MX27_INT_EMMAPP 52
-#define MX27_INT_VPU 53
-#define MX27_INT_USB_HS1 54
-#define MX27_INT_USB_HS2 55
-#define MX27_INT_USB_OTG 56
-#define MX27_INT_SCC_SMN 57
-#define MX27_INT_SCC_SCM 58
-#define MX27_INT_SAHARA 59
-#define MX27_INT_SLCDC 60
-#define MX27_INT_LCDC 61
-#define MX27_INT_IIM 62
-#define MX27_INT_CCM 63
+#include <asm/irq.h>
+#define MX27_INT_I2C2 (NR_IRQS_LEGACY + 1)
+#define MX27_INT_GPT6 (NR_IRQS_LEGACY + 2)
+#define MX27_INT_GPT5 (NR_IRQS_LEGACY + 3)
+#define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4)
+#define MX27_INT_RTIC (NR_IRQS_LEGACY + 5)
+#define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6)
+#define MX27_INT_SDHC (NR_IRQS_LEGACY + 7)
+#define MX27_INT_GPIO (NR_IRQS_LEGACY + 8)
+#define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9)
+#define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10)
+#define MX27_INT_SDHC1 (NR_IRQS_LEGACY + 11)
+#define MX27_INT_I2C1 (NR_IRQS_LEGACY + 12)
+#define MX27_INT_SSI2 (NR_IRQS_LEGACY + 13)
+#define MX27_INT_SSI1 (NR_IRQS_LEGACY + 14)
+#define MX27_INT_CSPI2 (NR_IRQS_LEGACY + 15)
+#define MX27_INT_CSPI1 (NR_IRQS_LEGACY + 16)
+#define MX27_INT_UART4 (NR_IRQS_LEGACY + 17)
+#define MX27_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX27_INT_UART2 (NR_IRQS_LEGACY + 19)
+#define MX27_INT_UART1 (NR_IRQS_LEGACY + 20)
+#define MX27_INT_KPP (NR_IRQS_LEGACY + 21)
+#define MX27_INT_RTC (NR_IRQS_LEGACY + 22)
+#define MX27_INT_PWM (NR_IRQS_LEGACY + 23)
+#define MX27_INT_GPT3 (NR_IRQS_LEGACY + 24)
+#define MX27_INT_GPT2 (NR_IRQS_LEGACY + 25)
+#define MX27_INT_GPT1 (NR_IRQS_LEGACY + 26)
+#define MX27_INT_WDOG (NR_IRQS_LEGACY + 27)
+#define MX27_INT_PCMCIA (NR_IRQS_LEGACY + 28)
+#define MX27_INT_NFC (NR_IRQS_LEGACY + 29)
+#define MX27_INT_ATA (NR_IRQS_LEGACY + 30)
+#define MX27_INT_CSI (NR_IRQS_LEGACY + 31)
+#define MX27_INT_DMACH0 (NR_IRQS_LEGACY + 32)
+#define MX27_INT_DMACH1 (NR_IRQS_LEGACY + 33)
+#define MX27_INT_DMACH2 (NR_IRQS_LEGACY + 34)
+#define MX27_INT_DMACH3 (NR_IRQS_LEGACY + 35)
+#define MX27_INT_DMACH4 (NR_IRQS_LEGACY + 36)
+#define MX27_INT_DMACH5 (NR_IRQS_LEGACY + 37)
+#define MX27_INT_DMACH6 (NR_IRQS_LEGACY + 38)
+#define MX27_INT_DMACH7 (NR_IRQS_LEGACY + 39)
+#define MX27_INT_DMACH8 (NR_IRQS_LEGACY + 40)
+#define MX27_INT_DMACH9 (NR_IRQS_LEGACY + 41)
+#define MX27_INT_DMACH10 (NR_IRQS_LEGACY + 42)
+#define MX27_INT_DMACH11 (NR_IRQS_LEGACY + 43)
+#define MX27_INT_DMACH12 (NR_IRQS_LEGACY + 44)
+#define MX27_INT_DMACH13 (NR_IRQS_LEGACY + 45)
+#define MX27_INT_DMACH14 (NR_IRQS_LEGACY + 46)
+#define MX27_INT_DMACH15 (NR_IRQS_LEGACY + 47)
+#define MX27_INT_UART6 (NR_IRQS_LEGACY + 48)
+#define MX27_INT_UART5 (NR_IRQS_LEGACY + 49)
+#define MX27_INT_FEC (NR_IRQS_LEGACY + 50)
+#define MX27_INT_EMMAPRP (NR_IRQS_LEGACY + 51)
+#define MX27_INT_EMMAPP (NR_IRQS_LEGACY + 52)
+#define MX27_INT_VPU (NR_IRQS_LEGACY + 53)
+#define MX27_INT_USB_HS1 (NR_IRQS_LEGACY + 54)
+#define MX27_INT_USB_HS2 (NR_IRQS_LEGACY + 55)
+#define MX27_INT_USB_OTG (NR_IRQS_LEGACY + 56)
+#define MX27_INT_SCC_SMN (NR_IRQS_LEGACY + 57)
+#define MX27_INT_SCC_SCM (NR_IRQS_LEGACY + 58)
+#define MX27_INT_SAHARA (NR_IRQS_LEGACY + 59)
+#define MX27_INT_SLCDC (NR_IRQS_LEGACY + 60)
+#define MX27_INT_LCDC (NR_IRQS_LEGACY + 61)
+#define MX27_INT_IIM (NR_IRQS_LEGACY + 62)
+#define MX27_INT_CCM (NR_IRQS_LEGACY + 63)
/* fixed DMA request numbers */
#define MX27_DMA_REQ_CSPI3_RX 1
diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h
index 7ded6f1..3c080a3 100644
--- a/arch/arm/plat-mxc/include/mach/mx2_cam.h
+++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h
@@ -23,6 +23,7 @@
#ifndef __MACH_MX2_CAM_H_
#define __MACH_MX2_CAM_H_
+#define MX2_CAMERA_SWAP16 (1 << 0)
#define MX2_CAMERA_EXT_VSYNC (1 << 1)
#define MX2_CAMERA_CCIR (1 << 2)
#define MX2_CAMERA_CCIR_INTERLACE (1 << 3)
@@ -30,6 +31,7 @@
#define MX2_CAMERA_GATED_CLOCK (1 << 5)
#define MX2_CAMERA_INV_DATA (1 << 6)
#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7)
+#define MX2_CAMERA_PACK_DIR_MSB (1 << 8)
/**
* struct mx2_camera_platform_data - optional platform data for mx2_camera
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index 6d07839..11642f5 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -68,49 +68,50 @@
#define MX2x_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000)
/* fixed interrupt numbers */
-#define MX2x_INT_CSPI3 6
-#define MX2x_INT_GPIO 8
-#define MX2x_INT_SDHC2 10
-#define MX2x_INT_SDHC1 11
-#define MX2x_INT_I2C 12
-#define MX2x_INT_SSI2 13
-#define MX2x_INT_SSI1 14
-#define MX2x_INT_CSPI2 15
-#define MX2x_INT_CSPI1 16
-#define MX2x_INT_UART4 17
-#define MX2x_INT_UART3 18
-#define MX2x_INT_UART2 19
-#define MX2x_INT_UART1 20
-#define MX2x_INT_KPP 21
-#define MX2x_INT_RTC 22
-#define MX2x_INT_PWM 23
-#define MX2x_INT_GPT3 24
-#define MX2x_INT_GPT2 25
-#define MX2x_INT_GPT1 26
-#define MX2x_INT_WDOG 27
-#define MX2x_INT_PCMCIA 28
-#define MX2x_INT_NANDFC 29
-#define MX2x_INT_CSI 31
-#define MX2x_INT_DMACH0 32
-#define MX2x_INT_DMACH1 33
-#define MX2x_INT_DMACH2 34
-#define MX2x_INT_DMACH3 35
-#define MX2x_INT_DMACH4 36
-#define MX2x_INT_DMACH5 37
-#define MX2x_INT_DMACH6 38
-#define MX2x_INT_DMACH7 39
-#define MX2x_INT_DMACH8 40
-#define MX2x_INT_DMACH9 41
-#define MX2x_INT_DMACH10 42
-#define MX2x_INT_DMACH11 43
-#define MX2x_INT_DMACH12 44
-#define MX2x_INT_DMACH13 45
-#define MX2x_INT_DMACH14 46
-#define MX2x_INT_DMACH15 47
-#define MX2x_INT_EMMAPRP 51
-#define MX2x_INT_EMMAPP 52
-#define MX2x_INT_SLCDC 60
-#define MX2x_INT_LCDC 61
+#include <asm/irq.h>
+#define MX2x_INT_CSPI3 (NR_IRQS_LEGACY + 6)
+#define MX2x_INT_GPIO (NR_IRQS_LEGACY + 8)
+#define MX2x_INT_SDHC2 (NR_IRQS_LEGACY + 10)
+#define MX2x_INT_SDHC1 (NR_IRQS_LEGACY + 11)
+#define MX2x_INT_I2C (NR_IRQS_LEGACY + 12)
+#define MX2x_INT_SSI2 (NR_IRQS_LEGACY + 13)
+#define MX2x_INT_SSI1 (NR_IRQS_LEGACY + 14)
+#define MX2x_INT_CSPI2 (NR_IRQS_LEGACY + 15)
+#define MX2x_INT_CSPI1 (NR_IRQS_LEGACY + 16)
+#define MX2x_INT_UART4 (NR_IRQS_LEGACY + 17)
+#define MX2x_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX2x_INT_UART2 (NR_IRQS_LEGACY + 19)
+#define MX2x_INT_UART1 (NR_IRQS_LEGACY + 20)
+#define MX2x_INT_KPP (NR_IRQS_LEGACY + 21)
+#define MX2x_INT_RTC (NR_IRQS_LEGACY + 22)
+#define MX2x_INT_PWM (NR_IRQS_LEGACY + 23)
+#define MX2x_INT_GPT3 (NR_IRQS_LEGACY + 24)
+#define MX2x_INT_GPT2 (NR_IRQS_LEGACY + 25)
+#define MX2x_INT_GPT1 (NR_IRQS_LEGACY + 26)
+#define MX2x_INT_WDOG (NR_IRQS_LEGACY + 27)
+#define MX2x_INT_PCMCIA (NR_IRQS_LEGACY + 28)
+#define MX2x_INT_NANDFC (NR_IRQS_LEGACY + 29)
+#define MX2x_INT_CSI (NR_IRQS_LEGACY + 31)
+#define MX2x_INT_DMACH0 (NR_IRQS_LEGACY + 32)
+#define MX2x_INT_DMACH1 (NR_IRQS_LEGACY + 33)
+#define MX2x_INT_DMACH2 (NR_IRQS_LEGACY + 34)
+#define MX2x_INT_DMACH3 (NR_IRQS_LEGACY + 35)
+#define MX2x_INT_DMACH4 (NR_IRQS_LEGACY + 36)
+#define MX2x_INT_DMACH5 (NR_IRQS_LEGACY + 37)
+#define MX2x_INT_DMACH6 (NR_IRQS_LEGACY + 38)
+#define MX2x_INT_DMACH7 (NR_IRQS_LEGACY + 39)
+#define MX2x_INT_DMACH8 (NR_IRQS_LEGACY + 40)
+#define MX2x_INT_DMACH9 (NR_IRQS_LEGACY + 41)
+#define MX2x_INT_DMACH10 (NR_IRQS_LEGACY + 42)
+#define MX2x_INT_DMACH11 (NR_IRQS_LEGACY + 43)
+#define MX2x_INT_DMACH12 (NR_IRQS_LEGACY + 44)
+#define MX2x_INT_DMACH13 (NR_IRQS_LEGACY + 45)
+#define MX2x_INT_DMACH14 (NR_IRQS_LEGACY + 46)
+#define MX2x_INT_DMACH15 (NR_IRQS_LEGACY + 47)
+#define MX2x_INT_EMMAPRP (NR_IRQS_LEGACY + 51)
+#define MX2x_INT_EMMAPP (NR_IRQS_LEGACY + 52)
+#define MX2x_INT_SLCDC (NR_IRQS_LEGACY + 60)
+#define MX2x_INT_LCDC (NR_IRQS_LEGACY + 61)
/* fixed DMA request numbers */
#define MX2x_DMA_REQ_CSPI3_RX 1
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index e27619e..dbced61 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -118,63 +118,67 @@
#define MX31_IO_P2V(x) IMX_IO_P2V(x)
#define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x))
-#define MX31_INT_I2C3 3
-#define MX31_INT_I2C2 4
-#define MX31_INT_MPEG4_ENCODER 5
-#define MX31_INT_RTIC 6
-#define MX31_INT_FIRI 7
-#define MX31_INT_SDHC2 8
-#define MX31_INT_SDHC1 9
-#define MX31_INT_I2C1 10
-#define MX31_INT_SSI2 11
-#define MX31_INT_SSI1 12
-#define MX31_INT_CSPI2 13
-#define MX31_INT_CSPI1 14
-#define MX31_INT_ATA 15
-#define MX31_INT_MBX 16
-#define MX31_INT_CSPI3 17
-#define MX31_INT_UART3 18
-#define MX31_INT_IIM 19
-#define MX31_INT_SIM2 20
-#define MX31_INT_SIM1 21
-#define MX31_INT_RNGA 22
-#define MX31_INT_EVTMON 23
-#define MX31_INT_KPP 24
-#define MX31_INT_RTC 25
-#define MX31_INT_PWM 26
-#define MX31_INT_EPIT2 27
-#define MX31_INT_EPIT1 28
-#define MX31_INT_GPT 29
-#define MX31_INT_POWER_FAIL 30
-#define MX31_INT_CCM_DVFS 31
-#define MX31_INT_UART2 32
-#define MX31_INT_NFC 33
-#define MX31_INT_SDMA 34
-#define MX31_INT_USB_HS1 35
-#define MX31_INT_USB_HS2 36
-#define MX31_INT_USB_OTG 37
-#define MX31_INT_MSHC1 39
-#define MX31_INT_MSHC2 40
-#define MX31_INT_IPU_ERR 41
-#define MX31_INT_IPU_SYN 42
-#define MX31_INT_UART1 45
-#define MX31_INT_UART4 46
-#define MX31_INT_UART5 47
-#define MX31_INT_ECT 48
-#define MX31_INT_SCC_SCM 49
-#define MX31_INT_SCC_SMN 50
-#define MX31_INT_GPIO2 51
-#define MX31_INT_GPIO1 52
-#define MX31_INT_CCM 53
-#define MX31_INT_PCMCIA 54
-#define MX31_INT_WDOG 55
-#define MX31_INT_GPIO3 56
-#define MX31_INT_EXT_POWER 58
-#define MX31_INT_EXT_TEMPER 59
-#define MX31_INT_EXT_SENSOR60 60
-#define MX31_INT_EXT_SENSOR61 61
-#define MX31_INT_EXT_WDOG 62
-#define MX31_INT_EXT_TV 63
+/*
+ * Interrupt numbers
+ */
+#include <asm/irq.h>
+#define MX31_INT_I2C3 (NR_IRQS_LEGACY + 3)
+#define MX31_INT_I2C2 (NR_IRQS_LEGACY + 4)
+#define MX31_INT_MPEG4_ENCODER (NR_IRQS_LEGACY + 5)
+#define MX31_INT_RTIC (NR_IRQS_LEGACY + 6)
+#define MX31_INT_FIRI (NR_IRQS_LEGACY + 7)
+#define MX31_INT_SDHC2 (NR_IRQS_LEGACY + 8)
+#define MX31_INT_SDHC1 (NR_IRQS_LEGACY + 9)
+#define MX31_INT_I2C1 (NR_IRQS_LEGACY + 10)
+#define MX31_INT_SSI2 (NR_IRQS_LEGACY + 11)
+#define MX31_INT_SSI1 (NR_IRQS_LEGACY + 12)
+#define MX31_INT_CSPI2 (NR_IRQS_LEGACY + 13)
+#define MX31_INT_CSPI1 (NR_IRQS_LEGACY + 14)
+#define MX31_INT_ATA (NR_IRQS_LEGACY + 15)
+#define MX31_INT_MBX (NR_IRQS_LEGACY + 16)
+#define MX31_INT_CSPI3 (NR_IRQS_LEGACY + 17)
+#define MX31_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX31_INT_IIM (NR_IRQS_LEGACY + 19)
+#define MX31_INT_SIM2 (NR_IRQS_LEGACY + 20)
+#define MX31_INT_SIM1 (NR_IRQS_LEGACY + 21)
+#define MX31_INT_RNGA (NR_IRQS_LEGACY + 22)
+#define MX31_INT_EVTMON (NR_IRQS_LEGACY + 23)
+#define MX31_INT_KPP (NR_IRQS_LEGACY + 24)
+#define MX31_INT_RTC (NR_IRQS_LEGACY + 25)
+#define MX31_INT_PWM (NR_IRQS_LEGACY + 26)
+#define MX31_INT_EPIT2 (NR_IRQS_LEGACY + 27)
+#define MX31_INT_EPIT1 (NR_IRQS_LEGACY + 28)
+#define MX31_INT_GPT (NR_IRQS_LEGACY + 29)
+#define MX31_INT_POWER_FAIL (NR_IRQS_LEGACY + 30)
+#define MX31_INT_CCM_DVFS (NR_IRQS_LEGACY + 31)
+#define MX31_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX31_INT_NFC (NR_IRQS_LEGACY + 33)
+#define MX31_INT_SDMA (NR_IRQS_LEGACY + 34)
+#define MX31_INT_USB_HS1 (NR_IRQS_LEGACY + 35)
+#define MX31_INT_USB_HS2 (NR_IRQS_LEGACY + 36)
+#define MX31_INT_USB_OTG (NR_IRQS_LEGACY + 37)
+#define MX31_INT_MSHC1 (NR_IRQS_LEGACY + 39)
+#define MX31_INT_MSHC2 (NR_IRQS_LEGACY + 40)
+#define MX31_INT_IPU_ERR (NR_IRQS_LEGACY + 41)
+#define MX31_INT_IPU_SYN (NR_IRQS_LEGACY + 42)
+#define MX31_INT_UART1 (NR_IRQS_LEGACY + 45)
+#define MX31_INT_UART4 (NR_IRQS_LEGACY + 46)
+#define MX31_INT_UART5 (NR_IRQS_LEGACY + 47)
+#define MX31_INT_ECT (NR_IRQS_LEGACY + 48)
+#define MX31_INT_SCC_SCM (NR_IRQS_LEGACY + 49)
+#define MX31_INT_SCC_SMN (NR_IRQS_LEGACY + 50)
+#define MX31_INT_GPIO2 (NR_IRQS_LEGACY + 51)
+#define MX31_INT_GPIO1 (NR_IRQS_LEGACY + 52)
+#define MX31_INT_CCM (NR_IRQS_LEGACY + 53)
+#define MX31_INT_PCMCIA (NR_IRQS_LEGACY + 54)
+#define MX31_INT_WDOG (NR_IRQS_LEGACY + 55)
+#define MX31_INT_GPIO3 (NR_IRQS_LEGACY + 56)
+#define MX31_INT_EXT_POWER (NR_IRQS_LEGACY + 58)
+#define MX31_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59)
+#define MX31_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60)
+#define MX31_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61)
+#define MX31_INT_EXT_WDOG (NR_IRQS_LEGACY + 62)
+#define MX31_INT_EXT_TV (NR_IRQS_LEGACY + 63)
#define MX31_DMA_REQ_SDHC1 20
#define MX31_DMA_REQ_SDHC2 21
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index 80965a9..2af5d3a 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -120,60 +120,61 @@
/*
* Interrupt numbers
*/
-#define MX35_INT_OWIRE 2
-#define MX35_INT_I2C3 3
-#define MX35_INT_I2C2 4
-#define MX35_INT_RTIC 6
-#define MX35_INT_ESDHC1 7
-#define MX35_INT_ESDHC2 8
-#define MX35_INT_ESDHC3 9
-#define MX35_INT_I2C1 10
-#define MX35_INT_SSI1 11
-#define MX35_INT_SSI2 12
-#define MX35_INT_CSPI2 13
-#define MX35_INT_CSPI1 14
-#define MX35_INT_ATA 15
-#define MX35_INT_GPU2D 16
-#define MX35_INT_ASRC 17
-#define MX35_INT_UART3 18
-#define MX35_INT_IIM 19
-#define MX35_INT_RNGA 22
-#define MX35_INT_EVTMON 23
-#define MX35_INT_KPP 24
-#define MX35_INT_RTC 25
-#define MX35_INT_PWM 26
-#define MX35_INT_EPIT2 27
-#define MX35_INT_EPIT1 28
-#define MX35_INT_GPT 29
-#define MX35_INT_POWER_FAIL 30
-#define MX35_INT_UART2 32
-#define MX35_INT_NFC 33
-#define MX35_INT_SDMA 34
-#define MX35_INT_USB_HS 35
-#define MX35_INT_USB_OTG 37
-#define MX35_INT_MSHC1 39
-#define MX35_INT_ESAI 40
-#define MX35_INT_IPU_ERR 41
-#define MX35_INT_IPU_SYN 42
-#define MX35_INT_CAN1 43
-#define MX35_INT_CAN2 44
-#define MX35_INT_UART1 45
-#define MX35_INT_MLB 46
-#define MX35_INT_SPDIF 47
-#define MX35_INT_ECT 48
-#define MX35_INT_SCC_SCM 49
-#define MX35_INT_SCC_SMN 50
-#define MX35_INT_GPIO2 51
-#define MX35_INT_GPIO1 52
-#define MX35_INT_WDOG 55
-#define MX35_INT_GPIO3 56
-#define MX35_INT_FEC 57
-#define MX35_INT_EXT_POWER 58
-#define MX35_INT_EXT_TEMPER 59
-#define MX35_INT_EXT_SENSOR60 60
-#define MX35_INT_EXT_SENSOR61 61
-#define MX35_INT_EXT_WDOG 62
-#define MX35_INT_EXT_TV 63
+#include <asm/irq.h>
+#define MX35_INT_OWIRE (NR_IRQS_LEGACY + 2)
+#define MX35_INT_I2C3 (NR_IRQS_LEGACY + 3)
+#define MX35_INT_I2C2 (NR_IRQS_LEGACY + 4)
+#define MX35_INT_RTIC (NR_IRQS_LEGACY + 6)
+#define MX35_INT_ESDHC1 (NR_IRQS_LEGACY + 7)
+#define MX35_INT_ESDHC2 (NR_IRQS_LEGACY + 8)
+#define MX35_INT_ESDHC3 (NR_IRQS_LEGACY + 9)
+#define MX35_INT_I2C1 (NR_IRQS_LEGACY + 10)
+#define MX35_INT_SSI1 (NR_IRQS_LEGACY + 11)
+#define MX35_INT_SSI2 (NR_IRQS_LEGACY + 12)
+#define MX35_INT_CSPI2 (NR_IRQS_LEGACY + 13)
+#define MX35_INT_CSPI1 (NR_IRQS_LEGACY + 14)
+#define MX35_INT_ATA (NR_IRQS_LEGACY + 15)
+#define MX35_INT_GPU2D (NR_IRQS_LEGACY + 16)
+#define MX35_INT_ASRC (NR_IRQS_LEGACY + 17)
+#define MX35_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX35_INT_IIM (NR_IRQS_LEGACY + 19)
+#define MX35_INT_RNGA (NR_IRQS_LEGACY + 22)
+#define MX35_INT_EVTMON (NR_IRQS_LEGACY + 23)
+#define MX35_INT_KPP (NR_IRQS_LEGACY + 24)
+#define MX35_INT_RTC (NR_IRQS_LEGACY + 25)
+#define MX35_INT_PWM (NR_IRQS_LEGACY + 26)
+#define MX35_INT_EPIT2 (NR_IRQS_LEGACY + 27)
+#define MX35_INT_EPIT1 (NR_IRQS_LEGACY + 28)
+#define MX35_INT_GPT (NR_IRQS_LEGACY + 29)
+#define MX35_INT_POWER_FAIL (NR_IRQS_LEGACY + 30)
+#define MX35_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX35_INT_NFC (NR_IRQS_LEGACY + 33)
+#define MX35_INT_SDMA (NR_IRQS_LEGACY + 34)
+#define MX35_INT_USB_HS (NR_IRQS_LEGACY + 35)
+#define MX35_INT_USB_OTG (NR_IRQS_LEGACY + 37)
+#define MX35_INT_MSHC1 (NR_IRQS_LEGACY + 39)
+#define MX35_INT_ESAI (NR_IRQS_LEGACY + 40)
+#define MX35_INT_IPU_ERR (NR_IRQS_LEGACY + 41)
+#define MX35_INT_IPU_SYN (NR_IRQS_LEGACY + 42)
+#define MX35_INT_CAN1 (NR_IRQS_LEGACY + 43)
+#define MX35_INT_CAN2 (NR_IRQS_LEGACY + 44)
+#define MX35_INT_UART1 (NR_IRQS_LEGACY + 45)
+#define MX35_INT_MLB (NR_IRQS_LEGACY + 46)
+#define MX35_INT_SPDIF (NR_IRQS_LEGACY + 47)
+#define MX35_INT_ECT (NR_IRQS_LEGACY + 48)
+#define MX35_INT_SCC_SCM (NR_IRQS_LEGACY + 49)
+#define MX35_INT_SCC_SMN (NR_IRQS_LEGACY + 50)
+#define MX35_INT_GPIO2 (NR_IRQS_LEGACY + 51)
+#define MX35_INT_GPIO1 (NR_IRQS_LEGACY + 52)
+#define MX35_INT_WDOG (NR_IRQS_LEGACY + 55)
+#define MX35_INT_GPIO3 (NR_IRQS_LEGACY + 56)
+#define MX35_INT_FEC (NR_IRQS_LEGACY + 57)
+#define MX35_INT_EXT_POWER (NR_IRQS_LEGACY + 58)
+#define MX35_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59)
+#define MX35_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60)
+#define MX35_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61)
+#define MX35_INT_EXT_WDOG (NR_IRQS_LEGACY + 62)
+#define MX35_INT_EXT_TV (NR_IRQS_LEGACY + 63)
#define MX35_DMA_REQ_SSI2_RX1 22
#define MX35_DMA_REQ_SSI2_TX1 23
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 30dbf42..96fb4fb 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -143,44 +143,45 @@
/*
* Interrupt numbers
*/
-#define MX3x_INT_I2C3 3
-#define MX3x_INT_I2C2 4
-#define MX3x_INT_RTIC 6
-#define MX3x_INT_I2C 10
-#define MX3x_INT_CSPI2 13
-#define MX3x_INT_CSPI1 14
-#define MX3x_INT_ATA 15
-#define MX3x_INT_UART3 18
-#define MX3x_INT_IIM 19
-#define MX3x_INT_RNGA 22
-#define MX3x_INT_EVTMON 23
-#define MX3x_INT_KPP 24
-#define MX3x_INT_RTC 25
-#define MX3x_INT_PWM 26
-#define MX3x_INT_EPIT2 27
-#define MX3x_INT_EPIT1 28
-#define MX3x_INT_GPT 29
-#define MX3x_INT_POWER_FAIL 30
-#define MX3x_INT_UART2 32
-#define MX3x_INT_NANDFC 33
-#define MX3x_INT_SDMA 34
-#define MX3x_INT_MSHC1 39
-#define MX3x_INT_IPU_ERR 41
-#define MX3x_INT_IPU_SYN 42
-#define MX3x_INT_UART1 45
-#define MX3x_INT_ECT 48
-#define MX3x_INT_SCC_SCM 49
-#define MX3x_INT_SCC_SMN 50
-#define MX3x_INT_GPIO2 51
-#define MX3x_INT_GPIO1 52
-#define MX3x_INT_WDOG 55
-#define MX3x_INT_GPIO3 56
-#define MX3x_INT_EXT_POWER 58
-#define MX3x_INT_EXT_TEMPER 59
-#define MX3x_INT_EXT_SENSOR60 60
-#define MX3x_INT_EXT_SENSOR61 61
-#define MX3x_INT_EXT_WDOG 62
-#define MX3x_INT_EXT_TV 63
+#include <asm/irq.h>
+#define MX3x_INT_I2C3 (NR_IRQS_LEGACY + 3)
+#define MX3x_INT_I2C2 (NR_IRQS_LEGACY + 4)
+#define MX3x_INT_RTIC (NR_IRQS_LEGACY + 6)
+#define MX3x_INT_I2C (NR_IRQS_LEGACY + 10)
+#define MX3x_INT_CSPI2 (NR_IRQS_LEGACY + 13)
+#define MX3x_INT_CSPI1 (NR_IRQS_LEGACY + 14)
+#define MX3x_INT_ATA (NR_IRQS_LEGACY + 15)
+#define MX3x_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX3x_INT_IIM (NR_IRQS_LEGACY + 19)
+#define MX3x_INT_RNGA (NR_IRQS_LEGACY + 22)
+#define MX3x_INT_EVTMON (NR_IRQS_LEGACY + 23)
+#define MX3x_INT_KPP (NR_IRQS_LEGACY + 24)
+#define MX3x_INT_RTC (NR_IRQS_LEGACY + 25)
+#define MX3x_INT_PWM (NR_IRQS_LEGACY + 26)
+#define MX3x_INT_EPIT2 (NR_IRQS_LEGACY + 27)
+#define MX3x_INT_EPIT1 (NR_IRQS_LEGACY + 28)
+#define MX3x_INT_GPT (NR_IRQS_LEGACY + 29)
+#define MX3x_INT_POWER_FAIL (NR_IRQS_LEGACY + 30)
+#define MX3x_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX3x_INT_NANDFC (NR_IRQS_LEGACY + 33)
+#define MX3x_INT_SDMA (NR_IRQS_LEGACY + 34)
+#define MX3x_INT_MSHC1 (NR_IRQS_LEGACY + 39)
+#define MX3x_INT_IPU_ERR (NR_IRQS_LEGACY + 41)
+#define MX3x_INT_IPU_SYN (NR_IRQS_LEGACY + 42)
+#define MX3x_INT_UART1 (NR_IRQS_LEGACY + 45)
+#define MX3x_INT_ECT (NR_IRQS_LEGACY + 48)
+#define MX3x_INT_SCC_SCM (NR_IRQS_LEGACY + 49)
+#define MX3x_INT_SCC_SMN (NR_IRQS_LEGACY + 50)
+#define MX3x_INT_GPIO2 (NR_IRQS_LEGACY + 51)
+#define MX3x_INT_GPIO1 (NR_IRQS_LEGACY + 52)
+#define MX3x_INT_WDOG (NR_IRQS_LEGACY + 55)
+#define MX3x_INT_GPIO3 (NR_IRQS_LEGACY + 56)
+#define MX3x_INT_EXT_POWER (NR_IRQS_LEGACY + 58)
+#define MX3x_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59)
+#define MX3x_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60)
+#define MX3x_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61)
+#define MX3x_INT_EXT_WDOG (NR_IRQS_LEGACY + 62)
+#define MX3x_INT_EXT_TV (NR_IRQS_LEGACY + 63)
#define MX3x_PROD_SIGNATURE 0x1 /* For MX31 */
diff --git a/arch/arm/plat-mxc/include/mach/mx50.h b/arch/arm/plat-mxc/include/mach/mx50.h
index 5f2da75a..09ac19c 100644
--- a/arch/arm/plat-mxc/include/mach/mx50.h
+++ b/arch/arm/plat-mxc/include/mach/mx50.h
@@ -188,99 +188,100 @@
/*
* Interrupt numbers
*/
-#define MX50_INT_MMC_SDHC1 1
-#define MX50_INT_MMC_SDHC2 2
-#define MX50_INT_MMC_SDHC3 3
-#define MX50_INT_MMC_SDHC4 4
-#define MX50_INT_DAP 5
-#define MX50_INT_SDMA 6
-#define MX50_INT_IOMUX 7
-#define MX50_INT_UART4 13
-#define MX50_INT_USB_H1 14
-#define MX50_INT_USB_OTG 18
-#define MX50_INT_DATABAHN 19
-#define MX50_INT_ELCDIF 20
-#define MX50_INT_EPXP 21
-#define MX50_INT_SRTC_NTZ 24
-#define MX50_INT_SRTC_TZ 25
-#define MX50_INT_EPDC 27
-#define MX50_INT_NIC 28
-#define MX50_INT_SSI1 29
-#define MX50_INT_SSI2 30
-#define MX50_INT_UART1 31
-#define MX50_INT_UART2 32
-#define MX50_INT_UART3 33
-#define MX50_INT_RESV34 34
-#define MX50_INT_RESV35 35
-#define MX50_INT_CSPI1 36
-#define MX50_INT_CSPI2 37
-#define MX50_INT_CSPI 38
-#define MX50_INT_GPT 39
-#define MX50_INT_EPIT1 40
-#define MX50_INT_GPIO1_INT7 42
-#define MX50_INT_GPIO1_INT6 43
-#define MX50_INT_GPIO1_INT5 44
-#define MX50_INT_GPIO1_INT4 45
-#define MX50_INT_GPIO1_INT3 46
-#define MX50_INT_GPIO1_INT2 47
-#define MX50_INT_GPIO1_INT1 48
-#define MX50_INT_GPIO1_INT0 49
-#define MX50_INT_GPIO1_LOW 50
-#define MX50_INT_GPIO1_HIGH 51
-#define MX50_INT_GPIO2_LOW 52
-#define MX50_INT_GPIO2_HIGH 53
-#define MX50_INT_GPIO3_LOW 54
-#define MX50_INT_GPIO3_HIGH 55
-#define MX50_INT_GPIO4_LOW 56
-#define MX50_INT_GPIO4_HIGH 57
-#define MX50_INT_WDOG1 58
-#define MX50_INT_KPP 60
-#define MX50_INT_PWM1 61
-#define MX50_INT_I2C1 62
-#define MX50_INT_I2C2 63
-#define MX50_INT_I2C3 64
-#define MX50_INT_RESV65 65
-#define MX50_INT_DCDC 66
-#define MX50_INT_THERMAL_ALARM 67
-#define MX50_INT_ANA3 68
-#define MX50_INT_ANA4 69
-#define MX50_INT_CCM1 71
-#define MX50_INT_CCM2 72
-#define MX50_INT_GPC1 73
-#define MX50_INT_GPC2 74
-#define MX50_INT_SRC 75
-#define MX50_INT_NM 76
-#define MX50_INT_PMU 77
-#define MX50_INT_CTI_IRQ 78
-#define MX50_INT_CTI1_TG0 79
-#define MX50_INT_CTI1_TG1 80
-#define MX50_INT_GPU2_IRQ 84
-#define MX50_INT_GPU2_BUSY 85
-#define MX50_INT_UART5 86
-#define MX50_INT_FEC 87
-#define MX50_INT_OWIRE 88
-#define MX50_INT_CTI1_TG2 89
-#define MX50_INT_SJC 90
-#define MX50_INT_DCP_CHAN1_3 91
-#define MX50_INT_DCP_CHAN0 92
-#define MX50_INT_PWM2 94
-#define MX50_INT_RNGB 97
-#define MX50_INT_CTI1_TG3 98
-#define MX50_INT_RAWNAND_BCH 100
-#define MX50_INT_RAWNAND_GPMI 102
-#define MX50_INT_GPIO5_LOW 103
-#define MX50_INT_GPIO5_HIGH 104
-#define MX50_INT_GPIO6_LOW 105
-#define MX50_INT_GPIO6_HIGH 106
-#define MX50_INT_MSHC 109
-#define MX50_INT_APBHDMA_CHAN0 110
-#define MX50_INT_APBHDMA_CHAN1 111
-#define MX50_INT_APBHDMA_CHAN2 112
-#define MX50_INT_APBHDMA_CHAN3 113
-#define MX50_INT_APBHDMA_CHAN4 114
-#define MX50_INT_APBHDMA_CHAN5 115
-#define MX50_INT_APBHDMA_CHAN6 116
-#define MX50_INT_APBHDMA_CHAN7 117
+#include <asm/irq.h>
+#define MX50_INT_MMC_SDHC1 (NR_IRQS_LEGACY + 1)
+#define MX50_INT_MMC_SDHC2 (NR_IRQS_LEGACY + 2)
+#define MX50_INT_MMC_SDHC3 (NR_IRQS_LEGACY + 3)
+#define MX50_INT_MMC_SDHC4 (NR_IRQS_LEGACY + 4)
+#define MX50_INT_DAP (NR_IRQS_LEGACY + 5)
+#define MX50_INT_SDMA (NR_IRQS_LEGACY + 6)
+#define MX50_INT_IOMUX (NR_IRQS_LEGACY + 7)
+#define MX50_INT_UART4 (NR_IRQS_LEGACY + 13)
+#define MX50_INT_USB_H1 (NR_IRQS_LEGACY + 14)
+#define MX50_INT_USB_OTG (NR_IRQS_LEGACY + 18)
+#define MX50_INT_DATABAHN (NR_IRQS_LEGACY + 19)
+#define MX50_INT_ELCDIF (NR_IRQS_LEGACY + 20)
+#define MX50_INT_EPXP (NR_IRQS_LEGACY + 21)
+#define MX50_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24)
+#define MX50_INT_SRTC_TZ (NR_IRQS_LEGACY + 25)
+#define MX50_INT_EPDC (NR_IRQS_LEGACY + 27)
+#define MX50_INT_NIC (NR_IRQS_LEGACY + 28)
+#define MX50_INT_SSI1 (NR_IRQS_LEGACY + 29)
+#define MX50_INT_SSI2 (NR_IRQS_LEGACY + 30)
+#define MX50_INT_UART1 (NR_IRQS_LEGACY + 31)
+#define MX50_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX50_INT_UART3 (NR_IRQS_LEGACY + 33)
+#define MX50_INT_RESV34 (NR_IRQS_LEGACY + 34)
+#define MX50_INT_RESV35 (NR_IRQS_LEGACY + 35)
+#define MX50_INT_CSPI1 (NR_IRQS_LEGACY + 36)
+#define MX50_INT_CSPI2 (NR_IRQS_LEGACY + 37)
+#define MX50_INT_CSPI (NR_IRQS_LEGACY + 38)
+#define MX50_INT_GPT (NR_IRQS_LEGACY + 39)
+#define MX50_INT_EPIT1 (NR_IRQS_LEGACY + 40)
+#define MX50_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42)
+#define MX50_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43)
+#define MX50_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44)
+#define MX50_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45)
+#define MX50_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46)
+#define MX50_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47)
+#define MX50_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48)
+#define MX50_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49)
+#define MX50_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50)
+#define MX50_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51)
+#define MX50_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52)
+#define MX50_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53)
+#define MX50_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54)
+#define MX50_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55)
+#define MX50_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56)
+#define MX50_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57)
+#define MX50_INT_WDOG1 (NR_IRQS_LEGACY + 58)
+#define MX50_INT_KPP (NR_IRQS_LEGACY + 60)
+#define MX50_INT_PWM1 (NR_IRQS_LEGACY + 61)
+#define MX50_INT_I2C1 (NR_IRQS_LEGACY + 62)
+#define MX50_INT_I2C2 (NR_IRQS_LEGACY + 63)
+#define MX50_INT_I2C3 (NR_IRQS_LEGACY + 64)
+#define MX50_INT_RESV65 (NR_IRQS_LEGACY + 65)
+#define MX50_INT_DCDC (NR_IRQS_LEGACY + 66)
+#define MX50_INT_THERMAL_ALARM (NR_IRQS_LEGACY + 67)
+#define MX50_INT_ANA3 (NR_IRQS_LEGACY + 68)
+#define MX50_INT_ANA4 (NR_IRQS_LEGACY + 69)
+#define MX50_INT_CCM1 (NR_IRQS_LEGACY + 71)
+#define MX50_INT_CCM2 (NR_IRQS_LEGACY + 72)
+#define MX50_INT_GPC1 (NR_IRQS_LEGACY + 73)
+#define MX50_INT_GPC2 (NR_IRQS_LEGACY + 74)
+#define MX50_INT_SRC (NR_IRQS_LEGACY + 75)
+#define MX50_INT_NM (NR_IRQS_LEGACY + 76)
+#define MX50_INT_PMU (NR_IRQS_LEGACY + 77)
+#define MX50_INT_CTI_IRQ (NR_IRQS_LEGACY + 78)
+#define MX50_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79)
+#define MX50_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80)
+#define MX50_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84)
+#define MX50_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85)
+#define MX50_INT_UART5 (NR_IRQS_LEGACY + 86)
+#define MX50_INT_FEC (NR_IRQS_LEGACY + 87)
+#define MX50_INT_OWIRE (NR_IRQS_LEGACY + 88)
+#define MX50_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89)
+#define MX50_INT_SJC (NR_IRQS_LEGACY + 90)
+#define MX50_INT_DCP_CHAN1_3 (NR_IRQS_LEGACY + 91)
+#define MX50_INT_DCP_CHAN0 (NR_IRQS_LEGACY + 92)
+#define MX50_INT_PWM2 (NR_IRQS_LEGACY + 94)
+#define MX50_INT_RNGB (NR_IRQS_LEGACY + 97)
+#define MX50_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98)
+#define MX50_INT_RAWNAND_BCH (NR_IRQS_LEGACY + 100)
+#define MX50_INT_RAWNAND_GPMI (NR_IRQS_LEGACY + 102)
+#define MX50_INT_GPIO5_LOW (NR_IRQS_LEGACY + 103)
+#define MX50_INT_GPIO5_HIGH (NR_IRQS_LEGACY + 104)
+#define MX50_INT_GPIO6_LOW (NR_IRQS_LEGACY + 105)
+#define MX50_INT_GPIO6_HIGH (NR_IRQS_LEGACY + 106)
+#define MX50_INT_MSHC (NR_IRQS_LEGACY + 109)
+#define MX50_INT_APBHDMA_CHAN0 (NR_IRQS_LEGACY + 110)
+#define MX50_INT_APBHDMA_CHAN1 (NR_IRQS_LEGACY + 111)
+#define MX50_INT_APBHDMA_CHAN2 (NR_IRQS_LEGACY + 112)
+#define MX50_INT_APBHDMA_CHAN3 (NR_IRQS_LEGACY + 113)
+#define MX50_INT_APBHDMA_CHAN4 (NR_IRQS_LEGACY + 114)
+#define MX50_INT_APBHDMA_CHAN5 (NR_IRQS_LEGACY + 115)
+#define MX50_INT_APBHDMA_CHAN6 (NR_IRQS_LEGACY + 116)
+#define MX50_INT_APBHDMA_CHAN7 (NR_IRQS_LEGACY + 117)
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
extern int mx50_revision(void);
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index cdf07c6..af844f7 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -232,110 +232,111 @@
/*
* Interrupt numbers
*/
-#define MX51_INT_BASE 0
-#define MX51_INT_RESV0 0
-#define MX51_INT_ESDHC1 1
-#define MX51_INT_ESDHC2 2
-#define MX51_INT_ESDHC3 3
-#define MX51_INT_ESDHC4 4
-#define MX51_INT_RESV5 5
-#define MX51_INT_SDMA 6
-#define MX51_INT_IOMUX 7
-#define MX51_INT_NFC 8
-#define MX51_INT_VPU 9
-#define MX51_INT_IPU_ERR 10
-#define MX51_INT_IPU_SYN 11
-#define MX51_INT_GPU 12
-#define MX51_INT_RESV13 13
-#define MX51_INT_USB_HS1 14
-#define MX51_INT_EMI 15
-#define MX51_INT_USB_HS2 16
-#define MX51_INT_USB_HS3 17
-#define MX51_INT_USB_OTG 18
-#define MX51_INT_SAHARA_H0 19
-#define MX51_INT_SAHARA_H1 20
-#define MX51_INT_SCC_SMN 21
-#define MX51_INT_SCC_STZ 22
-#define MX51_INT_SCC_SCM 23
-#define MX51_INT_SRTC_NTZ 24
-#define MX51_INT_SRTC_TZ 25
-#define MX51_INT_RTIC 26
-#define MX51_INT_CSU 27
-#define MX51_INT_SLIM_B 28
-#define MX51_INT_SSI1 29
-#define MX51_INT_SSI2 30
-#define MX51_INT_UART1 31
-#define MX51_INT_UART2 32
-#define MX51_INT_UART3 33
-#define MX51_INT_RESV34 34
-#define MX51_INT_RESV35 35
-#define MX51_INT_ECSPI1 36
-#define MX51_INT_ECSPI2 37
-#define MX51_INT_CSPI 38
-#define MX51_INT_GPT 39
-#define MX51_INT_EPIT1 40
-#define MX51_INT_EPIT2 41
-#define MX51_INT_GPIO1_INT7 42
-#define MX51_INT_GPIO1_INT6 43
-#define MX51_INT_GPIO1_INT5 44
-#define MX51_INT_GPIO1_INT4 45
-#define MX51_INT_GPIO1_INT3 46
-#define MX51_INT_GPIO1_INT2 47
-#define MX51_INT_GPIO1_INT1 48
-#define MX51_INT_GPIO1_INT0 49
-#define MX51_INT_GPIO1_LOW 50
-#define MX51_INT_GPIO1_HIGH 51
-#define MX51_INT_GPIO2_LOW 52
-#define MX51_INT_GPIO2_HIGH 53
-#define MX51_INT_GPIO3_LOW 54
-#define MX51_INT_GPIO3_HIGH 55
-#define MX51_INT_GPIO4_LOW 56
-#define MX51_INT_GPIO4_HIGH 57
-#define MX51_INT_WDOG1 58
-#define MX51_INT_WDOG2 59
-#define MX51_INT_KPP 60
-#define MX51_INT_PWM1 61
-#define MX51_INT_I2C1 62
-#define MX51_INT_I2C2 63
-#define MX51_INT_HS_I2C 64
-#define MX51_INT_RESV65 65
-#define MX51_INT_RESV66 66
-#define MX51_INT_SIM_IPB 67
-#define MX51_INT_SIM_DAT 68
-#define MX51_INT_IIM 69
-#define MX51_INT_ATA 70
-#define MX51_INT_CCM1 71
-#define MX51_INT_CCM2 72
-#define MX51_INT_GPC1 73
-#define MX51_INT_GPC2 74
-#define MX51_INT_SRC 75
-#define MX51_INT_NM 76
-#define MX51_INT_PMU 77
-#define MX51_INT_CTI_IRQ 78
-#define MX51_INT_CTI1_TG0 79
-#define MX51_INT_CTI1_TG1 80
-#define MX51_INT_MCG_ERR 81
-#define MX51_INT_MCG_TMR 82
-#define MX51_INT_MCG_FUNC 83
-#define MX51_INT_GPU2_IRQ 84
-#define MX51_INT_GPU2_BUSY 85
-#define MX51_INT_RESV86 86
-#define MX51_INT_FEC 87
-#define MX51_INT_OWIRE 88
-#define MX51_INT_CTI1_TG2 89
-#define MX51_INT_SJC 90
-#define MX51_INT_SPDIF 91
-#define MX51_INT_TVE 92
-#define MX51_INT_FIRI 93
-#define MX51_INT_PWM2 94
-#define MX51_INT_SLIM_EXP 95
-#define MX51_INT_SSI3 96
-#define MX51_INT_EMI_BOOT 97
-#define MX51_INT_CTI1_TG3 98
-#define MX51_INT_SMC_RX 99
-#define MX51_INT_VPU_IDLE 100
-#define MX51_INT_EMI_NFC 101
-#define MX51_INT_GPU_IDLE 102
+#include <asm/irq.h>
+#define MX51_INT_BASE (NR_IRQS_LEGACY + 0)
+#define MX51_INT_RESV0 (NR_IRQS_LEGACY + 0)
+#define MX51_INT_ESDHC1 (NR_IRQS_LEGACY + 1)
+#define MX51_INT_ESDHC2 (NR_IRQS_LEGACY + 2)
+#define MX51_INT_ESDHC3 (NR_IRQS_LEGACY + 3)
+#define MX51_INT_ESDHC4 (NR_IRQS_LEGACY + 4)
+#define MX51_INT_RESV5 (NR_IRQS_LEGACY + 5)
+#define MX51_INT_SDMA (NR_IRQS_LEGACY + 6)
+#define MX51_INT_IOMUX (NR_IRQS_LEGACY + 7)
+#define MX51_INT_NFC (NR_IRQS_LEGACY + 8)
+#define MX51_INT_VPU (NR_IRQS_LEGACY + 9)
+#define MX51_INT_IPU_ERR (NR_IRQS_LEGACY + 10)
+#define MX51_INT_IPU_SYN (NR_IRQS_LEGACY + 11)
+#define MX51_INT_GPU (NR_IRQS_LEGACY + 12)
+#define MX51_INT_RESV13 (NR_IRQS_LEGACY + 13)
+#define MX51_INT_USB_HS1 (NR_IRQS_LEGACY + 14)
+#define MX51_INT_EMI (NR_IRQS_LEGACY + 15)
+#define MX51_INT_USB_HS2 (NR_IRQS_LEGACY + 16)
+#define MX51_INT_USB_HS3 (NR_IRQS_LEGACY + 17)
+#define MX51_INT_USB_OTG (NR_IRQS_LEGACY + 18)
+#define MX51_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19)
+#define MX51_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20)
+#define MX51_INT_SCC_SMN (NR_IRQS_LEGACY + 21)
+#define MX51_INT_SCC_STZ (NR_IRQS_LEGACY + 22)
+#define MX51_INT_SCC_SCM (NR_IRQS_LEGACY + 23)
+#define MX51_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24)
+#define MX51_INT_SRTC_TZ (NR_IRQS_LEGACY + 25)
+#define MX51_INT_RTIC (NR_IRQS_LEGACY + 26)
+#define MX51_INT_CSU (NR_IRQS_LEGACY + 27)
+#define MX51_INT_SLIM_B (NR_IRQS_LEGACY + 28)
+#define MX51_INT_SSI1 (NR_IRQS_LEGACY + 29)
+#define MX51_INT_SSI2 (NR_IRQS_LEGACY + 30)
+#define MX51_INT_UART1 (NR_IRQS_LEGACY + 31)
+#define MX51_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX51_INT_UART3 (NR_IRQS_LEGACY + 33)
+#define MX51_INT_RESV34 (NR_IRQS_LEGACY + 34)
+#define MX51_INT_RESV35 (NR_IRQS_LEGACY + 35)
+#define MX51_INT_ECSPI1 (NR_IRQS_LEGACY + 36)
+#define MX51_INT_ECSPI2 (NR_IRQS_LEGACY + 37)
+#define MX51_INT_CSPI (NR_IRQS_LEGACY + 38)
+#define MX51_INT_GPT (NR_IRQS_LEGACY + 39)
+#define MX51_INT_EPIT1 (NR_IRQS_LEGACY + 40)
+#define MX51_INT_EPIT2 (NR_IRQS_LEGACY + 41)
+#define MX51_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42)
+#define MX51_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43)
+#define MX51_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44)
+#define MX51_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45)
+#define MX51_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46)
+#define MX51_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47)
+#define MX51_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48)
+#define MX51_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49)
+#define MX51_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50)
+#define MX51_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51)
+#define MX51_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52)
+#define MX51_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53)
+#define MX51_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54)
+#define MX51_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55)
+#define MX51_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56)
+#define MX51_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57)
+#define MX51_INT_WDOG1 (NR_IRQS_LEGACY + 58)
+#define MX51_INT_WDOG2 (NR_IRQS_LEGACY + 59)
+#define MX51_INT_KPP (NR_IRQS_LEGACY + 60)
+#define MX51_INT_PWM1 (NR_IRQS_LEGACY + 61)
+#define MX51_INT_I2C1 (NR_IRQS_LEGACY + 62)
+#define MX51_INT_I2C2 (NR_IRQS_LEGACY + 63)
+#define MX51_INT_HS_I2C (NR_IRQS_LEGACY + 64)
+#define MX51_INT_RESV65 (NR_IRQS_LEGACY + 65)
+#define MX51_INT_RESV66 (NR_IRQS_LEGACY + 66)
+#define MX51_INT_SIM_IPB (NR_IRQS_LEGACY + 67)
+#define MX51_INT_SIM_DAT (NR_IRQS_LEGACY + 68)
+#define MX51_INT_IIM (NR_IRQS_LEGACY + 69)
+#define MX51_INT_ATA (NR_IRQS_LEGACY + 70)
+#define MX51_INT_CCM1 (NR_IRQS_LEGACY + 71)
+#define MX51_INT_CCM2 (NR_IRQS_LEGACY + 72)
+#define MX51_INT_GPC1 (NR_IRQS_LEGACY + 73)
+#define MX51_INT_GPC2 (NR_IRQS_LEGACY + 74)
+#define MX51_INT_SRC (NR_IRQS_LEGACY + 75)
+#define MX51_INT_NM (NR_IRQS_LEGACY + 76)
+#define MX51_INT_PMU (NR_IRQS_LEGACY + 77)
+#define MX51_INT_CTI_IRQ (NR_IRQS_LEGACY + 78)
+#define MX51_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79)
+#define MX51_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80)
+#define MX51_INT_MCG_ERR (NR_IRQS_LEGACY + 81)
+#define MX51_INT_MCG_TMR (NR_IRQS_LEGACY + 82)
+#define MX51_INT_MCG_FUNC (NR_IRQS_LEGACY + 83)
+#define MX51_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84)
+#define MX51_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85)
+#define MX51_INT_RESV86 (NR_IRQS_LEGACY + 86)
+#define MX51_INT_FEC (NR_IRQS_LEGACY + 87)
+#define MX51_INT_OWIRE (NR_IRQS_LEGACY + 88)
+#define MX51_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89)
+#define MX51_INT_SJC (NR_IRQS_LEGACY + 90)
+#define MX51_INT_SPDIF (NR_IRQS_LEGACY + 91)
+#define MX51_INT_TVE (NR_IRQS_LEGACY + 92)
+#define MX51_INT_FIRI (NR_IRQS_LEGACY + 93)
+#define MX51_INT_PWM2 (NR_IRQS_LEGACY + 94)
+#define MX51_INT_SLIM_EXP (NR_IRQS_LEGACY + 95)
+#define MX51_INT_SSI3 (NR_IRQS_LEGACY + 96)
+#define MX51_INT_EMI_BOOT (NR_IRQS_LEGACY + 97)
+#define MX51_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98)
+#define MX51_INT_SMC_RX (NR_IRQS_LEGACY + 99)
+#define MX51_INT_VPU_IDLE (NR_IRQS_LEGACY + 100)
+#define MX51_INT_EMI_NFC (NR_IRQS_LEGACY + 101)
+#define MX51_INT_GPU_IDLE (NR_IRQS_LEGACY + 102)
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
extern int mx51_revision(void);
diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h
index a37e8c3..f829d1c 100644
--- a/arch/arm/plat-mxc/include/mach/mx53.h
+++ b/arch/arm/plat-mxc/include/mach/mx53.h
@@ -229,113 +229,114 @@
/*
* Interrupt numbers
*/
-#define MX53_INT_RESV0 0
-#define MX53_INT_ESDHC1 1
-#define MX53_INT_ESDHC2 2
-#define MX53_INT_ESDHC3 3
-#define MX53_INT_ESDHC4 4
-#define MX53_INT_DAP 5
-#define MX53_INT_SDMA 6
-#define MX53_INT_IOMUX 7
-#define MX53_INT_NFC 8
-#define MX53_INT_VPU 9
-#define MX53_INT_IPU_ERR 10
-#define MX53_INT_IPU_SYN 11
-#define MX53_INT_GPU 12
-#define MX53_INT_UART4 13
-#define MX53_INT_USB_H1 14
-#define MX53_INT_EMI 15
-#define MX53_INT_USB_H2 16
-#define MX53_INT_USB_H3 17
-#define MX53_INT_USB_OTG 18
-#define MX53_INT_SAHARA_H0 19
-#define MX53_INT_SAHARA_H1 20
-#define MX53_INT_SCC_SMN 21
-#define MX53_INT_SCC_STZ 22
-#define MX53_INT_SCC_SCM 23
-#define MX53_INT_SRTC_NTZ 24
-#define MX53_INT_SRTC_TZ 25
-#define MX53_INT_RTIC 26
-#define MX53_INT_CSU 27
-#define MX53_INT_SATA 28
-#define MX53_INT_SSI1 29
-#define MX53_INT_SSI2 30
-#define MX53_INT_UART1 31
-#define MX53_INT_UART2 32
-#define MX53_INT_UART3 33
-#define MX53_INT_RTC 34
-#define MX53_INT_PTP 35
-#define MX53_INT_ECSPI1 36
-#define MX53_INT_ECSPI2 37
-#define MX53_INT_CSPI 38
-#define MX53_INT_GPT 39
-#define MX53_INT_EPIT1 40
-#define MX53_INT_EPIT2 41
-#define MX53_INT_GPIO1_INT7 42
-#define MX53_INT_GPIO1_INT6 43
-#define MX53_INT_GPIO1_INT5 44
-#define MX53_INT_GPIO1_INT4 45
-#define MX53_INT_GPIO1_INT3 46
-#define MX53_INT_GPIO1_INT2 47
-#define MX53_INT_GPIO1_INT1 48
-#define MX53_INT_GPIO1_INT0 49
-#define MX53_INT_GPIO1_LOW 50
-#define MX53_INT_GPIO1_HIGH 51
-#define MX53_INT_GPIO2_LOW 52
-#define MX53_INT_GPIO2_HIGH 53
-#define MX53_INT_GPIO3_LOW 54
-#define MX53_INT_GPIO3_HIGH 55
-#define MX53_INT_GPIO4_LOW 56
-#define MX53_INT_GPIO4_HIGH 57
-#define MX53_INT_WDOG1 58
-#define MX53_INT_WDOG2 59
-#define MX53_INT_KPP 60
-#define MX53_INT_PWM1 61
-#define MX53_INT_I2C1 62
-#define MX53_INT_I2C2 63
-#define MX53_INT_I2C3 64
-#define MX53_INT_MLB 65
-#define MX53_INT_ASRC 66
-#define MX53_INT_SPDIF 67
-#define MX53_INT_SIM_DAT 68
-#define MX53_INT_IIM 69
-#define MX53_INT_ATA 70
-#define MX53_INT_CCM1 71
-#define MX53_INT_CCM2 72
-#define MX53_INT_GPC1 73
-#define MX53_INT_GPC2 74
-#define MX53_INT_SRC 75
-#define MX53_INT_NM 76
-#define MX53_INT_PMU 77
-#define MX53_INT_CTI_IRQ 78
-#define MX53_INT_CTI1_TG0 79
-#define MX53_INT_CTI1_TG1 80
-#define MX53_INT_ESAI 81
-#define MX53_INT_CAN1 82
-#define MX53_INT_CAN2 83
-#define MX53_INT_GPU2_IRQ 84
-#define MX53_INT_GPU2_BUSY 85
-#define MX53_INT_UART5 86
-#define MX53_INT_FEC 87
-#define MX53_INT_OWIRE 88
-#define MX53_INT_CTI1_TG2 89
-#define MX53_INT_SJC 90
-#define MX53_INT_TVE 92
-#define MX53_INT_FIRI 93
-#define MX53_INT_PWM2 94
-#define MX53_INT_SLIM_EXP 95
-#define MX53_INT_SSI3 96
-#define MX53_INT_EMI_BOOT 97
-#define MX53_INT_CTI1_TG3 98
-#define MX53_INT_SMC_RX 99
-#define MX53_INT_VPU_IDLE 100
-#define MX53_INT_EMI_NFC 101
-#define MX53_INT_GPU_IDLE 102
-#define MX53_INT_GPIO5_LOW 103
-#define MX53_INT_GPIO5_HIGH 104
-#define MX53_INT_GPIO6_LOW 105
-#define MX53_INT_GPIO6_HIGH 106
-#define MX53_INT_GPIO7_LOW 107
-#define MX53_INT_GPIO7_HIGH 108
+#include <asm/irq.h>
+#define MX53_INT_RESV0 (NR_IRQS_LEGACY + 0)
+#define MX53_INT_ESDHC1 (NR_IRQS_LEGACY + 1)
+#define MX53_INT_ESDHC2 (NR_IRQS_LEGACY + 2)
+#define MX53_INT_ESDHC3 (NR_IRQS_LEGACY + 3)
+#define MX53_INT_ESDHC4 (NR_IRQS_LEGACY + 4)
+#define MX53_INT_DAP (NR_IRQS_LEGACY + 5)
+#define MX53_INT_SDMA (NR_IRQS_LEGACY + 6)
+#define MX53_INT_IOMUX (NR_IRQS_LEGACY + 7)
+#define MX53_INT_NFC (NR_IRQS_LEGACY + 8)
+#define MX53_INT_VPU (NR_IRQS_LEGACY + 9)
+#define MX53_INT_IPU_ERR (NR_IRQS_LEGACY + 10)
+#define MX53_INT_IPU_SYN (NR_IRQS_LEGACY + 11)
+#define MX53_INT_GPU (NR_IRQS_LEGACY + 12)
+#define MX53_INT_UART4 (NR_IRQS_LEGACY + 13)
+#define MX53_INT_USB_H1 (NR_IRQS_LEGACY + 14)
+#define MX53_INT_EMI (NR_IRQS_LEGACY + 15)
+#define MX53_INT_USB_H2 (NR_IRQS_LEGACY + 16)
+#define MX53_INT_USB_H3 (NR_IRQS_LEGACY + 17)
+#define MX53_INT_USB_OTG (NR_IRQS_LEGACY + 18)
+#define MX53_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19)
+#define MX53_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20)
+#define MX53_INT_SCC_SMN (NR_IRQS_LEGACY + 21)
+#define MX53_INT_SCC_STZ (NR_IRQS_LEGACY + 22)
+#define MX53_INT_SCC_SCM (NR_IRQS_LEGACY + 23)
+#define MX53_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24)
+#define MX53_INT_SRTC_TZ (NR_IRQS_LEGACY + 25)
+#define MX53_INT_RTIC (NR_IRQS_LEGACY + 26)
+#define MX53_INT_CSU (NR_IRQS_LEGACY + 27)
+#define MX53_INT_SATA (NR_IRQS_LEGACY + 28)
+#define MX53_INT_SSI1 (NR_IRQS_LEGACY + 29)
+#define MX53_INT_SSI2 (NR_IRQS_LEGACY + 30)
+#define MX53_INT_UART1 (NR_IRQS_LEGACY + 31)
+#define MX53_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX53_INT_UART3 (NR_IRQS_LEGACY + 33)
+#define MX53_INT_RTC (NR_IRQS_LEGACY + 34)
+#define MX53_INT_PTP (NR_IRQS_LEGACY + 35)
+#define MX53_INT_ECSPI1 (NR_IRQS_LEGACY + 36)
+#define MX53_INT_ECSPI2 (NR_IRQS_LEGACY + 37)
+#define MX53_INT_CSPI (NR_IRQS_LEGACY + 38)
+#define MX53_INT_GPT (NR_IRQS_LEGACY + 39)
+#define MX53_INT_EPIT1 (NR_IRQS_LEGACY + 40)
+#define MX53_INT_EPIT2 (NR_IRQS_LEGACY + 41)
+#define MX53_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42)
+#define MX53_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43)
+#define MX53_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44)
+#define MX53_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45)
+#define MX53_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46)
+#define MX53_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47)
+#define MX53_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48)
+#define MX53_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49)
+#define MX53_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50)
+#define MX53_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51)
+#define MX53_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52)
+#define MX53_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53)
+#define MX53_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54)
+#define MX53_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55)
+#define MX53_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56)
+#define MX53_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57)
+#define MX53_INT_WDOG1 (NR_IRQS_LEGACY + 58)
+#define MX53_INT_WDOG2 (NR_IRQS_LEGACY + 59)
+#define MX53_INT_KPP (NR_IRQS_LEGACY + 60)
+#define MX53_INT_PWM1 (NR_IRQS_LEGACY + 61)
+#define MX53_INT_I2C1 (NR_IRQS_LEGACY + 62)
+#define MX53_INT_I2C2 (NR_IRQS_LEGACY + 63)
+#define MX53_INT_I2C3 (NR_IRQS_LEGACY + 64)
+#define MX53_INT_MLB (NR_IRQS_LEGACY + 65)
+#define MX53_INT_ASRC (NR_IRQS_LEGACY + 66)
+#define MX53_INT_SPDIF (NR_IRQS_LEGACY + 67)
+#define MX53_INT_SIM_DAT (NR_IRQS_LEGACY + 68)
+#define MX53_INT_IIM (NR_IRQS_LEGACY + 69)
+#define MX53_INT_ATA (NR_IRQS_LEGACY + 70)
+#define MX53_INT_CCM1 (NR_IRQS_LEGACY + 71)
+#define MX53_INT_CCM2 (NR_IRQS_LEGACY + 72)
+#define MX53_INT_GPC1 (NR_IRQS_LEGACY + 73)
+#define MX53_INT_GPC2 (NR_IRQS_LEGACY + 74)
+#define MX53_INT_SRC (NR_IRQS_LEGACY + 75)
+#define MX53_INT_NM (NR_IRQS_LEGACY + 76)
+#define MX53_INT_PMU (NR_IRQS_LEGACY + 77)
+#define MX53_INT_CTI_IRQ (NR_IRQS_LEGACY + 78)
+#define MX53_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79)
+#define MX53_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80)
+#define MX53_INT_ESAI (NR_IRQS_LEGACY + 81)
+#define MX53_INT_CAN1 (NR_IRQS_LEGACY + 82)
+#define MX53_INT_CAN2 (NR_IRQS_LEGACY + 83)
+#define MX53_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84)
+#define MX53_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85)
+#define MX53_INT_UART5 (NR_IRQS_LEGACY + 86)
+#define MX53_INT_FEC (NR_IRQS_LEGACY + 87)
+#define MX53_INT_OWIRE (NR_IRQS_LEGACY + 88)
+#define MX53_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89)
+#define MX53_INT_SJC (NR_IRQS_LEGACY + 90)
+#define MX53_INT_TVE (NR_IRQS_LEGACY + 92)
+#define MX53_INT_FIRI (NR_IRQS_LEGACY + 93)
+#define MX53_INT_PWM2 (NR_IRQS_LEGACY + 94)
+#define MX53_INT_SLIM_EXP (NR_IRQS_LEGACY + 95)
+#define MX53_INT_SSI3 (NR_IRQS_LEGACY + 96)
+#define MX53_INT_EMI_BOOT (NR_IRQS_LEGACY + 97)
+#define MX53_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98)
+#define MX53_INT_SMC_RX (NR_IRQS_LEGACY + 99)
+#define MX53_INT_VPU_IDLE (NR_IRQS_LEGACY + 100)
+#define MX53_INT_EMI_NFC (NR_IRQS_LEGACY + 101)
+#define MX53_INT_GPU_IDLE (NR_IRQS_LEGACY + 102)
+#define MX53_INT_GPIO5_LOW (NR_IRQS_LEGACY + 103)
+#define MX53_INT_GPIO5_HIGH (NR_IRQS_LEGACY + 104)
+#define MX53_INT_GPIO6_LOW (NR_IRQS_LEGACY + 105)
+#define MX53_INT_GPIO6_HIGH (NR_IRQS_LEGACY + 106)
+#define MX53_INT_GPIO7_LOW (NR_IRQS_LEGACY + 107)
+#define MX53_INT_GPIO7_HIGH (NR_IRQS_LEGACY + 108)
#endif /* ifndef __MACH_MX53_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
index 9ffd1bb..7eb9d13 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -20,13 +20,15 @@
#define MXC_EHCI_INTERFACE_MASK (0xf)
#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
-#define MXC_EHCI_TTL_ENABLED (1 << 6)
+#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
+#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
+#define MXC_EHCI_TTL_ENABLED (1 << 8)
-#define MXC_EHCI_INTERNAL_PHY (1 << 7)
-#define MXC_EHCI_IPPUE_DOWN (1 << 8)
-#define MXC_EHCI_IPPUE_UP (1 << 9)
-#define MXC_EHCI_WAKEUP_ENABLED (1 << 10)
-#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 11)
+#define MXC_EHCI_INTERNAL_PHY (1 << 9)
+#define MXC_EHCI_IPPUE_DOWN (1 << 10)
+#define MXC_EHCI_IPPUE_UP (1 << 11)
+#define MXC_EHCI_WAKEUP_ENABLED (1 << 12)
+#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13)
#define MXC_USBCTRL_OFFSET 0
#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 99f958c..a17abcf 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -58,6 +58,7 @@
/* MX31, MX35, MX25, MX5 */
#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */
#define V2_TCTL_CLK_IPG (1 << 6)
+#define V2_TCTL_CLK_PER (2 << 6)
#define V2_TCTL_FRR (1 << 9)
#define V2_IR 0x0c
#define V2_TSTAT 0x08
@@ -159,7 +160,8 @@
[CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
[CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT",
[CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
- [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED"
+ [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED",
+ [CLOCK_EVT_MODE_RESUME] = "CLOCK_EVT_MODE_RESUME",
};
#endif /* DEBUG */
@@ -280,23 +282,22 @@
return 0;
}
-void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
+void __init mxc_timer_init(void __iomem *base, int irq)
{
uint32_t tctl_val;
+ struct clk *timer_clk;
struct clk *timer_ipg_clk;
- if (!timer_clk) {
- timer_clk = clk_get_sys("imx-gpt.0", "per");
- if (IS_ERR(timer_clk)) {
- pr_err("i.MX timer: unable to get clk\n");
- return;
- }
-
- timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
- if (!IS_ERR(timer_ipg_clk))
- clk_prepare_enable(timer_ipg_clk);
+ timer_clk = clk_get_sys("imx-gpt.0", "per");
+ if (IS_ERR(timer_clk)) {
+ pr_err("i.MX timer: unable to get clk\n");
+ return;
}
+ timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
+ if (!IS_ERR(timer_ipg_clk))
+ clk_prepare_enable(timer_ipg_clk);
+
clk_prepare_enable(timer_clk);
timer_base = base;
@@ -309,7 +310,7 @@
__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
if (timer_is_v2())
- tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
+ tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
else
tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index 98308ec..c219317 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -15,6 +15,8 @@
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
@@ -49,6 +51,7 @@
#define TZIC_ID0 0x0FD0 /* Indentification Register 0 */
void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
+static struct irq_domain *domain;
#define TZIC_NUM_IRQS 128
@@ -77,15 +80,14 @@
static void tzic_irq_suspend(struct irq_data *d)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
- int idx = gc->irq_base >> 5;
+ int idx = d->hwirq >> 5;
__raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx));
}
static void tzic_irq_resume(struct irq_data *d)
{
- struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
- int idx = gc->irq_base >> 5;
+ int idx = d->hwirq >> 5;
__raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)),
tzic_base + TZIC_WAKEUP0(idx));
@@ -102,11 +104,10 @@
#endif
};
-static __init void tzic_init_gc(unsigned int irq_start)
+static __init void tzic_init_gc(int idx, unsigned int irq_start)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
- int idx = irq_start >> 5;
gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base,
handle_level_irq);
@@ -140,7 +141,8 @@
while (stat) {
handled = 1;
irqofs = fls(stat) - 1;
- handle_IRQ(irqofs + i * 32, regs);
+ handle_IRQ(irq_find_mapping(domain,
+ irqofs + i * 32), regs);
stat &= ~(1 << irqofs);
}
}
@@ -154,6 +156,8 @@
*/
void __init tzic_init_irq(void __iomem *irqbase)
{
+ struct device_node *np;
+ int irq_base;
int i;
tzic_base = irqbase;
@@ -175,12 +179,20 @@
/* all IRQ no FIQ Warning :: No selection */
- for (i = 0; i < TZIC_NUM_IRQS; i += 32)
- tzic_init_gc(i);
+ irq_base = irq_alloc_descs(-1, 0, TZIC_NUM_IRQS, numa_node_id());
+ WARN_ON(irq_base < 0);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,tzic");
+ domain = irq_domain_add_legacy(np, TZIC_NUM_IRQS, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+ WARN_ON(!domain);
+
+ for (i = 0; i < 4; i++, irq_base += 32)
+ tzic_init_gc(i, irq_base);
#ifdef CONFIG_FIQ
/* Initialize FIQ */
- init_FIQ();
+ init_FIQ(FIQ_START);
#endif
pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
@@ -190,6 +202,10 @@
* tzic_enable_wake() - enable wakeup interrupt
*
* @return 0 if successful; non-zero otherwise
+ *
+ * This function provides an interrupt synchronization point that is required
+ * by tzic enabled platforms before entering imx specific low power modes (ie,
+ * those low power modes beyond the WAIT_CLOCKED basic ARM WFI only mode).
*/
int tzic_enable_wake(void)
{
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ad95c7a..dd36eba 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -29,7 +29,7 @@
select USE_OF
select PROC_DEVICETREE if PROC_FS
help
- "Systems based on OMAP2, OMAP3 or OMAP4"
+ "Systems based on OMAP2, OMAP3, OMAP4 or OMAP5"
endchoice
@@ -45,31 +45,30 @@
depends on OMAP_DEBUG_DEVICES
default y if LEDS_CLASS
-config OMAP_SMARTREFLEX
- bool "SmartReflex support"
- depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
+config POWER_AVS_OMAP
+ bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
+ depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM
help
- Say Y if you want to enable SmartReflex.
-
- SmartReflex can perform continuous dynamic voltage
- scaling around the nominal operating point voltage
- according to silicon characteristics and operating
- conditions. Enabling SmartReflex reduces power
- consumption.
+ Say Y to enable AVS(Adaptive Voltage Scaling)
+ support on OMAP containing the version 1 or
+ version 2 of the SmartReflex IP.
+ V1 is the 65nm version used in OMAP3430.
+ V2 is the update for the 45nm version of the IP used in OMAP3630
+ and OMAP4430
Please note, that by default SmartReflex is only
- initialized. To enable the automatic voltage
- compensation for vdd mpu and vdd core from user space,
+ initialized and not enabled. To enable the automatic voltage
+ compensation for vdd mpu and vdd core from user space,
user must write 1 to
- /debug/voltage/vdd_<X>/smartreflex/autocomp,
- where X is mpu or core for OMAP3.
+ /debug/smartreflex/sr_<X>/autocomp,
+ where X is mpu_iva or core for OMAP3.
Optionally autocompensation can be enabled in the kernel
by default during system init via the enable_on_init flag
which an be passed as platform data to the smartreflex driver.
-config OMAP_SMARTREFLEX_CLASS3
+config POWER_AVS_OMAP_CLASS3
bool "Class 3 mode of Smartreflex Implementation"
- depends on OMAP_SMARTREFLEX && TWL4030_CORE
+ depends on POWER_AVS_OMAP && TWL4030_CORE
help
Say Y to enable Class 3 implementation of Smartreflex
@@ -150,7 +149,7 @@
This timer saves power compared to the OMAP_MPU_TIMER, and has
support for no tick during idle. The 32KHz timer provides less
intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
- currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
+ currently only available for OMAP16XX, 24XX, 34XX and OMAP4/5.
config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index ed8605f..961bf85 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -4,15 +4,13 @@
# Common support
obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
- usb.o fb.o counter_32k.o
+ fb.o counter_32k.o
obj-m :=
obj-n :=
obj- :=
# omap_device support (OMAP2+ only at the moment)
-obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
-obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
-obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
+obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 62ec5c4..706b7e2 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -461,6 +461,7 @@
struct clk *c;
struct clk *pa;
+ mutex_lock(&clocks_mutex);
seq_printf(s, "%-30s %-30s %-10s %s\n",
"clock-name", "parent-name", "rate", "use-count");
@@ -469,6 +470,7 @@
seq_printf(s, "%-30s %-30s %-10lu %d\n",
c->name, pa ? pa->name : "none", c->rate, c->usecount);
}
+ mutex_unlock(&clocks_mutex);
return 0;
}
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 0a9b9a9..89a3723 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -77,3 +77,12 @@
init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
#endif
}
+
+/*
+ * Stub function for OMAP2 so that common files
+ * continue to build when custom builds are used
+ */
+int __weak omap_secure_ram_reserve_memblock(void)
+{
+ return 0;
+}
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 2132c4f..dbf1e03 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -29,7 +29,10 @@
#include <plat/clock.h>
/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
-#define OMAP2_32KSYNCNT_CR_OFF 0x10
+#define OMAP2_32KSYNCNT_REV_OFF 0x0
+#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30)
+#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10
+#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30
/*
* 32KHz clocksource ... always available, on pretty most chips except
@@ -84,9 +87,16 @@
int ret;
/*
- * 32k sync Counter register offset is at 0x10
+ * 32k sync Counter IP register offsets vary between the
+ * highlander version and the legacy ones.
+ * The 'SCHEME' bits(30-31) of the revision register is used
+ * to identify the version.
*/
- sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF;
+ if (__raw_readl(vbase + OMAP2_32KSYNCNT_REV_OFF) &
+ OMAP2_32KSYNCNT_REV_SCHEME)
+ sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH;
+ else
+ sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_LOW;
/*
* 120000 rough estimate from the calculations in
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index cb16ade..7fe6267 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -573,22 +573,25 @@
static inline void omap_enable_channel_irq(int lch)
{
- u32 status;
-
/* Clear CSR */
if (cpu_class_is_omap1())
- status = p->dma_read(CSR, lch);
- else if (cpu_class_is_omap2())
+ p->dma_read(CSR, lch);
+ else
p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
/* Enable some nice interrupts. */
p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch);
}
-static void omap_disable_channel_irq(int lch)
+static inline void omap_disable_channel_irq(int lch)
{
- if (cpu_class_is_omap2())
- p->dma_write(0, CICR, lch);
+ /* disable channel interrupts */
+ p->dma_write(0, CICR, lch);
+ /* Clear CSR */
+ if (cpu_class_is_omap1())
+ p->dma_read(CSR, lch);
+ else
+ p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
}
void omap_enable_dma_irq(int lch, u16 bits)
@@ -632,14 +635,14 @@
l = p->dma_read(CLNK_CTRL, lch);
/* Disable interrupts */
+ omap_disable_channel_irq(lch);
+
if (cpu_class_is_omap1()) {
- p->dma_write(0, CICR, lch);
/* Set the STOP_LNK bit */
l |= 1 << 14;
}
if (cpu_class_is_omap2()) {
- omap_disable_channel_irq(lch);
/* Clear the ENABLE_LNK bit */
l &= ~(1 << 15);
}
@@ -657,6 +660,9 @@
return;
spin_lock_irqsave(&dma_chan_lock, flags);
+ /* clear IRQ STATUS */
+ p->dma_write(1 << lch, IRQSTATUS_L0, lch);
+ /* Enable interrupt */
val = p->dma_read(IRQENABLE_L0, lch);
val |= 1 << lch;
p->dma_write(val, IRQENABLE_L0, lch);
@@ -672,9 +678,12 @@
return;
spin_lock_irqsave(&dma_chan_lock, flags);
+ /* Disable interrupt */
val = p->dma_read(IRQENABLE_L0, lch);
val &= ~(1 << lch);
p->dma_write(val, IRQENABLE_L0, lch);
+ /* clear IRQ STATUS */
+ p->dma_write(1 << lch, IRQSTATUS_L0, lch);
spin_unlock_irqrestore(&dma_chan_lock, flags);
}
@@ -745,11 +754,8 @@
}
if (cpu_class_is_omap2()) {
- omap2_enable_irq_lch(free_ch);
omap_enable_channel_irq(free_ch);
- /* Clear the CSR register and IRQ status register */
- p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, free_ch);
- p->dma_write(1 << free_ch, IRQSTATUS_L0, 0);
+ omap2_enable_irq_lch(free_ch);
}
*dma_ch_out = free_ch;
@@ -768,27 +774,19 @@
return;
}
- if (cpu_class_is_omap1()) {
- /* Disable all DMA interrupts for the channel. */
- p->dma_write(0, CICR, lch);
- /* Make sure the DMA transfer is stopped. */
- p->dma_write(0, CCR, lch);
- }
-
- if (cpu_class_is_omap2()) {
+ /* Disable interrupt for logical channel */
+ if (cpu_class_is_omap2())
omap2_disable_irq_lch(lch);
- /* Clear the CSR register and IRQ status register */
- p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
- p->dma_write(1 << lch, IRQSTATUS_L0, lch);
+ /* Disable all DMA interrupts for the channel. */
+ omap_disable_channel_irq(lch);
- /* Disable all DMA interrupts for the channel. */
- p->dma_write(0, CICR, lch);
+ /* Make sure the DMA transfer is stopped. */
+ p->dma_write(0, CCR, lch);
- /* Make sure the DMA transfer is stopped. */
- p->dma_write(0, CCR, lch);
+ /* Clear registers */
+ if (cpu_class_is_omap2())
omap_clear_dma(lch);
- }
spin_lock_irqsave(&dma_chan_lock, flags);
dma_chan[lch].dev_id = -1;
@@ -943,8 +941,7 @@
u32 l;
/* Disable all interrupts on the channel */
- if (cpu_class_is_omap1())
- p->dma_write(0, CICR, lch);
+ omap_disable_channel_irq(lch);
l = p->dma_read(CCR, lch);
if (IS_DMA_ERRATA(DMA_ERRATA_i541) &&
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 3b0cfeb..626ad8c 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -37,14 +37,16 @@
#include <linux/module.h>
#include <linux/io.h>
-#include <linux/slab.h>
+#include <linux/device.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
#include <plat/dmtimer.h>
+#include <plat/omap-pm.h>
#include <mach/hardware.h>
+static u32 omap_reserved_systimers;
static LIST_HEAD(omap_timer_list);
static DEFINE_SPINLOCK(dm_timer_lock);
@@ -133,17 +135,22 @@
int omap_dm_timer_prepare(struct omap_dm_timer *timer)
{
- struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
int ret;
- timer->fclk = clk_get(&timer->pdev->dev, "fck");
- if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) {
- timer->fclk = NULL;
- dev_err(&timer->pdev->dev, ": No fclk handle.\n");
- return -EINVAL;
+ /*
+ * FIXME: OMAP1 devices do not use the clock framework for dmtimers so
+ * do not call clk_get() for these devices.
+ */
+ if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {
+ timer->fclk = clk_get(&timer->pdev->dev, "fck");
+ if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) {
+ timer->fclk = NULL;
+ dev_err(&timer->pdev->dev, ": No fclk handle.\n");
+ return -EINVAL;
+ }
}
- if (pdata->needs_manual_reset)
+ if (timer->capability & OMAP_TIMER_NEEDS_RESET)
omap_dm_timer_reset(timer);
ret = omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
@@ -152,6 +159,21 @@
return ret;
}
+static inline u32 omap_dm_timer_reserved_systimer(int id)
+{
+ return (omap_reserved_systimers & (1 << (id - 1))) ? 1 : 0;
+}
+
+int omap_dm_timer_reserve_systimer(int id)
+{
+ if (omap_dm_timer_reserved_systimer(id))
+ return -ENODEV;
+
+ omap_reserved_systimers |= (1 << (id - 1));
+
+ return 0;
+}
+
struct omap_dm_timer *omap_dm_timer_request(void)
{
struct omap_dm_timer *timer = NULL, *t;
@@ -325,10 +347,9 @@
omap_dm_timer_enable(timer);
- if (timer->loses_context) {
- u32 ctx_loss_cnt_after =
- timer->get_context_loss_count(&timer->pdev->dev);
- if (ctx_loss_cnt_after != timer->ctx_loss_count)
+ if (!(timer->capability & OMAP_TIMER_ALWON)) {
+ if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) !=
+ timer->ctx_loss_count)
omap_timer_restore_context(timer);
}
@@ -347,20 +368,18 @@
int omap_dm_timer_stop(struct omap_dm_timer *timer)
{
unsigned long rate = 0;
- struct dmtimer_platform_data *pdata;
if (unlikely(!timer))
return -EINVAL;
- pdata = timer->pdev->dev.platform_data;
- if (!pdata->needs_manual_reset)
+ if (!(timer->capability & OMAP_TIMER_NEEDS_RESET))
rate = clk_get_rate(timer->fclk);
__omap_dm_timer_stop(timer, timer->posted, rate);
- if (timer->loses_context && timer->get_context_loss_count)
+ if (!(timer->capability & OMAP_TIMER_ALWON))
timer->ctx_loss_count =
- timer->get_context_loss_count(&timer->pdev->dev);
+ omap_pm_get_dev_context_loss_count(&timer->pdev->dev);
/*
* Since the register values are computed and written within
@@ -378,6 +397,8 @@
int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
int ret;
+ char *parent_name = NULL;
+ struct clk *fclk, *parent;
struct dmtimer_platform_data *pdata;
if (unlikely(!timer))
@@ -388,7 +409,49 @@
if (source < 0 || source >= 3)
return -EINVAL;
- ret = pdata->set_timer_src(timer->pdev, source);
+ /*
+ * FIXME: Used for OMAP1 devices only because they do not currently
+ * use the clock framework to set the parent clock. To be removed
+ * once OMAP1 migrated to using clock framework for dmtimers
+ */
+ if (pdata->set_timer_src)
+ return pdata->set_timer_src(timer->pdev, source);
+
+ fclk = clk_get(&timer->pdev->dev, "fck");
+ if (IS_ERR_OR_NULL(fclk)) {
+ pr_err("%s: fck not found\n", __func__);
+ return -EINVAL;
+ }
+
+ switch (source) {
+ case OMAP_TIMER_SRC_SYS_CLK:
+ parent_name = "timer_sys_ck";
+ break;
+
+ case OMAP_TIMER_SRC_32_KHZ:
+ parent_name = "timer_32k_ck";
+ break;
+
+ case OMAP_TIMER_SRC_EXT_CLK:
+ parent_name = "timer_ext_ck";
+ break;
+ }
+
+ parent = clk_get(&timer->pdev->dev, parent_name);
+ if (IS_ERR_OR_NULL(parent)) {
+ pr_err("%s: %s not found\n", __func__, parent_name);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = clk_set_parent(fclk, parent);
+ if (IS_ERR_VALUE(ret))
+ pr_err("%s: failed to set %s as parent\n", __func__,
+ parent_name);
+
+ clk_put(parent);
+out:
+ clk_put(fclk);
return ret;
}
@@ -431,10 +494,9 @@
omap_dm_timer_enable(timer);
- if (timer->loses_context) {
- u32 ctx_loss_cnt_after =
- timer->get_context_loss_count(&timer->pdev->dev);
- if (ctx_loss_cnt_after != timer->ctx_loss_count)
+ if (!(timer->capability & OMAP_TIMER_ALWON)) {
+ if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) !=
+ timer->ctx_loss_count)
omap_timer_restore_context(timer);
}
@@ -627,68 +689,57 @@
*/
static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
{
- int ret;
unsigned long flags;
struct omap_dm_timer *timer;
- struct resource *mem, *irq, *ioarea;
+ struct resource *mem, *irq;
+ struct device *dev = &pdev->dev;
struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
if (!pdata) {
- dev_err(&pdev->dev, "%s: no platform data.\n", __func__);
+ dev_err(dev, "%s: no platform data.\n", __func__);
return -ENODEV;
}
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (unlikely(!irq)) {
- dev_err(&pdev->dev, "%s: no IRQ resource.\n", __func__);
+ dev_err(dev, "%s: no IRQ resource.\n", __func__);
return -ENODEV;
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(!mem)) {
- dev_err(&pdev->dev, "%s: no memory resource.\n", __func__);
+ dev_err(dev, "%s: no memory resource.\n", __func__);
return -ENODEV;
}
- ioarea = request_mem_region(mem->start, resource_size(mem),
- pdev->name);
- if (!ioarea) {
- dev_err(&pdev->dev, "%s: region already claimed.\n", __func__);
- return -EBUSY;
- }
-
- timer = kzalloc(sizeof(struct omap_dm_timer), GFP_KERNEL);
+ timer = devm_kzalloc(dev, sizeof(struct omap_dm_timer), GFP_KERNEL);
if (!timer) {
- dev_err(&pdev->dev, "%s: no memory for omap_dm_timer.\n",
- __func__);
- ret = -ENOMEM;
- goto err_free_ioregion;
+ dev_err(dev, "%s: memory alloc failed!\n", __func__);
+ return -ENOMEM;
}
- timer->io_base = ioremap(mem->start, resource_size(mem));
+ timer->io_base = devm_request_and_ioremap(dev, mem);
if (!timer->io_base) {
- dev_err(&pdev->dev, "%s: ioremap failed.\n", __func__);
- ret = -ENOMEM;
- goto err_free_mem;
+ dev_err(dev, "%s: region already claimed.\n", __func__);
+ return -ENOMEM;
}
timer->id = pdev->id;
timer->irq = irq->start;
- timer->reserved = pdata->reserved;
+ timer->reserved = omap_dm_timer_reserved_systimer(timer->id);
timer->pdev = pdev;
- timer->loses_context = pdata->loses_context;
- timer->get_context_loss_count = pdata->get_context_loss_count;
+ timer->capability = pdata->timer_capability;
/* Skip pm_runtime_enable for OMAP1 */
- if (!pdata->needs_manual_reset) {
- pm_runtime_enable(&pdev->dev);
- pm_runtime_irq_safe(&pdev->dev);
+ if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {
+ pm_runtime_enable(dev);
+ pm_runtime_irq_safe(dev);
}
if (!timer->reserved) {
- pm_runtime_get_sync(&pdev->dev);
+ pm_runtime_get_sync(dev);
__omap_dm_timer_init_regs(timer);
- pm_runtime_put(&pdev->dev);
+ pm_runtime_put(dev);
}
/* add the timer element to the list */
@@ -696,17 +747,9 @@
list_add_tail(&timer->node, &omap_timer_list);
spin_unlock_irqrestore(&dm_timer_lock, flags);
- dev_dbg(&pdev->dev, "Device Probed.\n");
+ dev_dbg(dev, "Device Probed.\n");
return 0;
-
-err_free_mem:
- kfree(timer);
-
-err_free_ioregion:
- release_mem_region(mem->start, resource_size(mem));
-
- return ret;
}
/**
@@ -727,7 +770,6 @@
list_for_each_entry(timer, &omap_timer_list, node)
if (timer->pdev->id == pdev->id) {
list_del(&timer->node);
- kfree(timer);
ret = 0;
break;
}
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
index 4814c5b..e62f20a 100644
--- a/arch/arm/plat-omap/include/plat/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -57,44 +57,6 @@
int (*power_off)(void * data);
};
-struct omap_usb_config {
- /* Configure drivers according to the connectors on your board:
- * - "A" connector (rectagular)
- * ... for host/OHCI use, set "register_host".
- * - "B" connector (squarish) or "Mini-B"
- * ... for device/gadget use, set "register_dev".
- * - "Mini-AB" connector (very similar to Mini-B)
- * ... for OTG use as device OR host, initialize "otg"
- */
- unsigned register_host:1;
- unsigned register_dev:1;
- u8 otg; /* port number, 1-based: usb1 == 2 */
-
- u8 hmc_mode;
-
- /* implicitly true if otg: host supports remote wakeup? */
- u8 rwc;
-
- /* signaling pins used to talk to transceiver on usbN:
- * 0 == usbN unused
- * 2 == usb0-only, using internal transceiver
- * 3 == 3 wire bidirectional
- * 4 == 4 wire bidirectional
- * 6 == 6 wire unidirectional (or TLL)
- */
- u8 pins[3];
-
- struct platform_device *udc_device;
- struct platform_device *ohci_device;
- struct platform_device *otg_device;
-
- u32 (*usb0_init)(unsigned nwires, unsigned is_device);
- u32 (*usb1_init)(unsigned nwires);
- u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
-
- int (*ocpi_enable)(void);
-};
-
struct omap_lcd_config {
char panel_name[16];
char ctrl_name[16];
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
index d0ed8c4..025d85a 100644
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -39,6 +39,7 @@
#define CK_443X (1 << 11)
#define CK_TI816X (1 << 12)
#define CK_446X (1 << 13)
+#define CK_AM33XX (1 << 14) /* AM33xx specific clocks */
#define CK_1710 (1 << 15) /* 1710 extra for rate selection */
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index d0ef57c..656b986 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -156,7 +156,6 @@
u8 min_divider;
u16 max_divider;
u8 modes;
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
void __iomem *autoidle_reg;
void __iomem *idlest_reg;
u32 autoidle_mask;
@@ -167,7 +166,6 @@
u8 auto_recal_bit;
u8 recal_en_bit;
u8 recal_st_bit;
-# endif
u8 flags;
};
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 297245d..68b180e 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -9,7 +9,7 @@
*
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
- * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -70,6 +70,7 @@
* cpu_is_omap443x(): True for OMAP4430
* cpu_is_omap446x(): True for OMAP4460
* cpu_is_omap447x(): True for OMAP4470
+ * soc_is_omap543x(): True for OMAP5430, OMAP5432
*/
#define GET_OMAP_CLASS (omap_rev() & 0xff)
@@ -122,6 +123,7 @@
IS_OMAP_CLASS(34xx, 0x34)
IS_OMAP_CLASS(44xx, 0x44)
IS_AM_CLASS(35xx, 0x35)
+IS_OMAP_CLASS(54xx, 0x54)
IS_AM_CLASS(33xx, 0x33)
IS_TI_CLASS(81xx, 0x81)
@@ -133,6 +135,7 @@
IS_OMAP_SUBCLASS(443x, 0x443)
IS_OMAP_SUBCLASS(446x, 0x446)
IS_OMAP_SUBCLASS(447x, 0x447)
+IS_OMAP_SUBCLASS(543x, 0x543)
IS_TI_SUBCLASS(816x, 0x816)
IS_TI_SUBCLASS(814x, 0x814)
@@ -150,12 +153,14 @@
#define cpu_is_ti816x() 0
#define cpu_is_ti814x() 0
#define soc_is_am35xx() 0
-#define cpu_is_am33xx() 0
-#define cpu_is_am335x() 0
+#define soc_is_am33xx() 0
+#define soc_is_am335x() 0
#define cpu_is_omap44xx() 0
#define cpu_is_omap443x() 0
#define cpu_is_omap446x() 0
#define cpu_is_omap447x() 0
+#define soc_is_omap54xx() 0
+#define soc_is_omap543x() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
@@ -238,9 +243,7 @@
/*
* Macros to detect individual cpu types.
* These are only rarely needed.
- * cpu_is_omap330(): True for OMAP330
- * cpu_is_omap730(): True for OMAP730
- * cpu_is_omap850(): True for OMAP850
+ * cpu_is_omap310(): True for OMAP310
* cpu_is_omap1510(): True for OMAP1510
* cpu_is_omap1610(): True for OMAP1610
* cpu_is_omap1611(): True for OMAP1611
@@ -252,8 +255,6 @@
* cpu_is_omap2423(): True for OMAP2423
* cpu_is_omap2430(): True for OMAP2430
* cpu_is_omap3430(): True for OMAP3430
- * cpu_is_omap3505(): True for OMAP3505
- * cpu_is_omap3517(): True for OMAP3517
*/
#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
@@ -264,8 +265,6 @@
}
IS_OMAP_TYPE(310, 0x0310)
-IS_OMAP_TYPE(730, 0x0730)
-IS_OMAP_TYPE(850, 0x0850)
IS_OMAP_TYPE(1510, 0x1510)
IS_OMAP_TYPE(1610, 0x1610)
IS_OMAP_TYPE(1611, 0x1611)
@@ -277,12 +276,8 @@
IS_OMAP_TYPE(2423, 0x2423)
IS_OMAP_TYPE(2430, 0x2430)
IS_OMAP_TYPE(3430, 0x3430)
-IS_OMAP_TYPE(3505, 0x3517)
-IS_OMAP_TYPE(3517, 0x3517)
#define cpu_is_omap310() 0
-#define cpu_is_omap730() 0
-#define cpu_is_omap850() 0
#define cpu_is_omap1510() 0
#define cpu_is_omap1610() 0
#define cpu_is_omap5912() 0
@@ -293,30 +288,15 @@
#define cpu_is_omap2422() 0
#define cpu_is_omap2423() 0
#define cpu_is_omap2430() 0
-#define cpu_is_omap3503() 0
-#define cpu_is_omap3515() 0
-#define cpu_is_omap3525() 0
-#define cpu_is_omap3530() 0
-#define cpu_is_omap3505() 0
-#define cpu_is_omap3517() 0
#define cpu_is_omap3430() 0
#define cpu_is_omap3630() 0
+#define soc_is_omap5430() 0
/*
* Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710.
+ * between 310 vs. 1510 and 1611B/5912 vs. 1710.
*/
-#if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap730
-# define cpu_is_omap730() is_omap730()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP850)
-# undef cpu_is_omap850
-# define cpu_is_omap850() is_omap850()
-#endif
-
#if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap310
# undef cpu_is_omap1510
@@ -350,40 +330,24 @@
#if defined(CONFIG_ARCH_OMAP3)
# undef cpu_is_omap3430
-# undef cpu_is_omap3503
-# undef cpu_is_omap3515
-# undef cpu_is_omap3525
-# undef cpu_is_omap3530
-# undef cpu_is_omap3505
-# undef cpu_is_omap3517
# undef cpu_is_ti81xx
# undef cpu_is_ti816x
# undef cpu_is_ti814x
# undef soc_is_am35xx
-# undef cpu_is_am33xx
-# undef cpu_is_am335x
# define cpu_is_omap3430() is_omap3430()
-# define cpu_is_omap3503() (cpu_is_omap3430() && \
- (!omap3_has_iva()) && \
- (!omap3_has_sgx()))
-# define cpu_is_omap3515() (cpu_is_omap3430() && \
- (!omap3_has_iva()) && \
- (omap3_has_sgx()))
-# define cpu_is_omap3525() (cpu_is_omap3430() && \
- (!omap3_has_sgx()) && \
- (omap3_has_iva()))
-# define cpu_is_omap3530() (cpu_is_omap3430())
-# define cpu_is_omap3517() is_omap3517()
-# define cpu_is_omap3505() (cpu_is_omap3517() && \
- !omap3_has_sgx())
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
# define cpu_is_ti81xx() is_ti81xx()
# define cpu_is_ti816x() is_ti816x()
# define cpu_is_ti814x() is_ti814x()
# define soc_is_am35xx() is_am35xx()
-# define cpu_is_am33xx() is_am33xx()
-# define cpu_is_am335x() is_am335x()
+#endif
+
+# if defined(CONFIG_SOC_AM33XX)
+# undef soc_is_am33xx
+# undef soc_is_am335x
+# define soc_is_am33xx() is_am33xx()
+# define soc_is_am335x() is_am335x()
#endif
# if defined(CONFIG_ARCH_OMAP4)
@@ -397,11 +361,18 @@
# define cpu_is_omap447x() is_omap447x()
# endif
+# if defined(CONFIG_SOC_OMAP5)
+# undef soc_is_omap54xx
+# undef soc_is_omap543x
+# define soc_is_omap54xx() is_omap54xx()
+# define soc_is_omap543x() is_omap543x()
+#endif
+
/* Macros to detect if we have OMAP1 or OMAP2 */
#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \
cpu_is_omap16xx())
#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \
- cpu_is_omap44xx())
+ cpu_is_omap44xx() || soc_is_omap54xx())
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
@@ -424,10 +395,6 @@
#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
-#define OMAP3517_CLASS 0x35170034
-#define OMAP3517_REV_ES1_0 OMAP3517_CLASS
-#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8))
-
#define TI816X_CLASS 0x81600034
#define TI8168_REV_ES1_0 TI816X_CLASS
#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
@@ -441,7 +408,7 @@
#define AM35XX_REV_ES1_0 AM35XX_CLASS
#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8))
-#define AM335X_CLASS 0x33500034
+#define AM335X_CLASS 0x33500033
#define AM335X_REV_ES1_0 AM335X_CLASS
#define OMAP443X_CLASS 0x44300044
@@ -458,9 +425,14 @@
#define OMAP447X_CLASS 0x44700044
#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8))
+#define OMAP54XX_CLASS 0x54000054
+#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
+#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
+
void omap2xxx_check_revision(void);
void omap3xxx_check_revision(void);
void omap4xxx_check_revision(void);
+void omap5xxx_check_revision(void);
void omap3xxx_check_features(void);
void ti81xx_check_features(void);
void omap4xxx_check_features(void);
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 5da7356..19e7fa5 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -55,23 +55,17 @@
#define OMAP_TIMER_TRIGGER_OVERFLOW 0x01
#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02
-/*
- * IP revision identifier so that Highlander IP
- * in OMAP4 can be distinguished.
- */
-#define OMAP_TIMER_IP_VERSION_1 0x1
-
/* timer capabilities used in hwmod database */
#define OMAP_TIMER_SECURE 0x80000000
#define OMAP_TIMER_ALWON 0x40000000
#define OMAP_TIMER_HAS_PWM 0x20000000
+#define OMAP_TIMER_NEEDS_RESET 0x10000000
struct omap_timer_capability_dev_attr {
u32 timer_capability;
};
struct omap_dm_timer;
-struct clk;
struct timer_regs {
u32 tidr;
@@ -96,16 +90,12 @@
};
struct dmtimer_platform_data {
+ /* set_timer_src - Only used for OMAP1 devices */
int (*set_timer_src)(struct platform_device *pdev, int source);
- int timer_ip_version;
- u32 needs_manual_reset:1;
- bool reserved;
-
- bool loses_context;
-
- int (*get_context_loss_count)(struct device *dev);
+ u32 timer_capability;
};
+int omap_dm_timer_reserve_systimer(int id);
struct omap_dm_timer *omap_dm_timer_request(void);
struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
int omap_dm_timer_free(struct omap_dm_timer *timer);
@@ -272,13 +262,11 @@
unsigned reserved:1;
unsigned posted:1;
struct timer_regs context;
- bool loses_context;
int ctx_loss_count;
int revision;
+ u32 capability;
struct platform_device *pdev;
struct list_head node;
-
- int (*get_context_loss_count)(struct device *dev);
};
int omap_dm_timer_prepare(struct omap_dm_timer *timer);
diff --git a/arch/arm/plat-omap/include/plat/dsp.h b/arch/arm/plat-omap/include/plat/dsp.h
index 9c604b3..5927709 100644
--- a/arch/arm/plat-omap/include/plat/dsp.h
+++ b/arch/arm/plat-omap/include/plat/dsp.h
@@ -18,6 +18,9 @@
u32 (*dsp_cm_read)(s16 , u16);
u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
+ void (*set_bootaddr)(u32);
+ void (*set_bootmode)(u8);
+
phys_addr_t phys_mempool_base;
phys_addr_t phys_mempool_size;
};
diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h
index e897978..ddbde38 100644
--- a/arch/arm/plat-omap/include/plat/hardware.h
+++ b/arch/arm/plat-omap/include/plat/hardware.h
@@ -288,5 +288,6 @@
#include <plat/omap44xx.h>
#include <plat/ti81xx.h>
#include <plat/am33xx.h>
+#include <plat/omap54xx.h>
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index a7754a8..5493bd9 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -172,8 +172,7 @@
extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
int is_closed);
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
- defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers);
void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
@@ -185,7 +184,6 @@
static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
{
}
-
#endif
extern int omap_msdi_reset(struct omap_hwmod *oh);
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
index 999ffba..045e320 100644
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ b/arch/arm/plat-omap/include/plat/multi.h
@@ -99,4 +99,13 @@
# endif
#endif
+#ifdef CONFIG_SOC_OMAP5
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap5
+# endif
+#endif
+
#endif /* __PLAT_OMAP_MULTI_H */
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index aeba717..3239489 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -99,7 +99,7 @@
/*
* OMAP730/850 has a slightly different config for the pin mux.
- * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and
* not the FUNC_MUX_CTRL_x regs from hardware.h
* - for pull-up/down, only has one enable bit which is is in the same register
* as mux config
diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h
index 8c7994c..0e4acd2 100644
--- a/arch/arm/plat-omap/include/plat/omap-secure.h
+++ b/arch/arm/plat-omap/include/plat/omap-secure.h
@@ -3,12 +3,7 @@
#include <linux/types.h>
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
extern int omap_secure_ram_reserve_memblock(void);
-#else
-static inline void omap_secure_ram_reserve_memblock(void)
-{ }
-#endif
#ifdef CONFIG_OMAP4_ERRATA_I688
extern int omap_barrier_reserve_memblock(void);
diff --git a/arch/arm/plat-omap/include/plat/omap54xx.h b/arch/arm/plat-omap/include/plat/omap54xx.h
new file mode 100644
index 0000000..a2582bb
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap54xx.h
@@ -0,0 +1,32 @@
+/*:
+ * Address mappings and base address for OMAP5 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_SOC_OMAP54XX_H
+#define __ASM_SOC_OMAP54XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_54XX_BASE 0x4a000000
+#define L4_WK_54XX_BASE 0x4ae00000
+#define L4_PER_54XX_BASE 0x48000000
+#define L3_54XX_BASE 0x44000000
+#define OMAP54XX_32KSYNCT_BASE 0x4ae04000
+#define OMAP54XX_CM_CORE_AON_BASE 0x4a004000
+#define OMAP54XX_CM_CORE_BASE 0x4a008000
+#define OMAP54XX_PRM_BASE 0x4ae06000
+#define OMAP54XX_PRCM_MPU_BASE 0x48243000
+#define OMAP54XX_SCM_BASE 0x4a002000
+#define OMAP54XX_CTRL_BASE 0x4a002800
+
+#endif /* __ASM_SOC_OMAP555554XX_H */
diff --git a/arch/arm/plat-omap/include/plat/omap730.h b/arch/arm/plat-omap/include/plat/omap730.h
deleted file mode 100644
index 14272bc..0000000
--- a/arch/arm/plat-omap/include/plat/omap730.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* arch/arm/plat-omap/include/mach/omap730.h
- *
- * Hardware definitions for TI OMAP730 processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP730_H
-#define __ASM_ARCH_OMAP730_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP730_DSP_BASE 0xE0000000
-#define OMAP730_DSP_SIZE 0x50000
-#define OMAP730_DSP_START 0xE0000000
-
-#define OMAP730_DSPREG_BASE 0xE1000000
-#define OMAP730_DSPREG_SIZE SZ_128K
-#define OMAP730_DSPREG_START 0xE1000000
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 specific configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_CONFIG_BASE 0xfffe1000
-#define OMAP730_IO_CONF_0 0xfffe1070
-#define OMAP730_IO_CONF_1 0xfffe1074
-#define OMAP730_IO_CONF_2 0xfffe1078
-#define OMAP730_IO_CONF_3 0xfffe107c
-#define OMAP730_IO_CONF_4 0xfffe1080
-#define OMAP730_IO_CONF_5 0xfffe1084
-#define OMAP730_IO_CONF_6 0xfffe1088
-#define OMAP730_IO_CONF_7 0xfffe108c
-#define OMAP730_IO_CONF_8 0xfffe1090
-#define OMAP730_IO_CONF_9 0xfffe1094
-#define OMAP730_IO_CONF_10 0xfffe1098
-#define OMAP730_IO_CONF_11 0xfffe109c
-#define OMAP730_IO_CONF_12 0xfffe10a0
-#define OMAP730_IO_CONF_13 0xfffe10a4
-
-#define OMAP730_MODE_1 0xfffe1010
-#define OMAP730_MODE_2 0xfffe1014
-
-/* CSMI specials: in terms of base + offset */
-#define OMAP730_MODE2_OFFSET 0x14
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 traffic controller configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_FLASH_CFG_0 0xfffecc10
-#define OMAP730_FLASH_ACFG_0 0xfffecc50
-#define OMAP730_FLASH_CFG_1 0xfffecc14
-#define OMAP730_FLASH_ACFG_1 0xfffecc54
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 DSP control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_ICR_BASE 0xfffbb800
-#define OMAP730_DSP_M_CTL 0xfffbb804
-#define OMAP730_DSP_MMU_BASE 0xfffed200
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 PCC_UPLD configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_PCC_UPLD_CTRL_BASE (0xfffe0900)
-#define OMAP730_PCC_UPLD_CTRL (OMAP730_PCC_UPLD_CTRL_BASE + 0x00)
-
-#endif /* __ASM_ARCH_OMAP730_H */
-
diff --git a/arch/arm/plat-omap/include/plat/omap850.h b/arch/arm/plat-omap/include/plat/omap850.h
deleted file mode 100644
index c33f679..0000000
--- a/arch/arm/plat-omap/include/plat/omap850.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* arch/arm/plat-omap/include/mach/omap850.h
- *
- * Hardware definitions for TI OMAP850 processor.
- *
- * Derived from omap730.h by Zebediah C. McClure <zmc@lurian.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP850_H
-#define __ASM_ARCH_OMAP850_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP850_DSP_BASE 0xE0000000
-#define OMAP850_DSP_SIZE 0x50000
-#define OMAP850_DSP_START 0xE0000000
-
-#define OMAP850_DSPREG_BASE 0xE1000000
-#define OMAP850_DSPREG_SIZE SZ_128K
-#define OMAP850_DSPREG_START 0xE1000000
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP850 specific configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP850_CONFIG_BASE 0xfffe1000
-#define OMAP850_IO_CONF_0 0xfffe1070
-#define OMAP850_IO_CONF_1 0xfffe1074
-#define OMAP850_IO_CONF_2 0xfffe1078
-#define OMAP850_IO_CONF_3 0xfffe107c
-#define OMAP850_IO_CONF_4 0xfffe1080
-#define OMAP850_IO_CONF_5 0xfffe1084
-#define OMAP850_IO_CONF_6 0xfffe1088
-#define OMAP850_IO_CONF_7 0xfffe108c
-#define OMAP850_IO_CONF_8 0xfffe1090
-#define OMAP850_IO_CONF_9 0xfffe1094
-#define OMAP850_IO_CONF_10 0xfffe1098
-#define OMAP850_IO_CONF_11 0xfffe109c
-#define OMAP850_IO_CONF_12 0xfffe10a0
-#define OMAP850_IO_CONF_13 0xfffe10a4
-
-#define OMAP850_MODE_1 0xfffe1010
-#define OMAP850_MODE_2 0xfffe1014
-
-/* CSMI specials: in terms of base + offset */
-#define OMAP850_MODE2_OFFSET 0x14
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP850 traffic controller configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP850_FLASH_CFG_0 0xfffecc10
-#define OMAP850_FLASH_ACFG_0 0xfffecc50
-#define OMAP850_FLASH_CFG_1 0xfffecc14
-#define OMAP850_FLASH_ACFG_1 0xfffecc54
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP850 DSP control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP850_ICR_BASE 0xfffbb800
-#define OMAP850_DSP_M_CTL 0xfffbb804
-#define OMAP850_DSP_MMU_BASE 0xfffed200
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP850 PCC_UPLD configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP850_PCC_UPLD_CTRL_BASE (0xfffe0900)
-#define OMAP850_PCC_UPLD_CTRL (OMAP850_PCC_UPLD_CTRL_BASE + 0x00)
-
-#endif /* __ASM_ARCH_OMAP850_H */
-
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index c835b71..6132972 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -41,6 +41,7 @@
extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
+extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
/*
* OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
@@ -69,6 +70,17 @@
#define SYSC_TYPE2_SIDLEMODE_MASK (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
#define SYSC_TYPE2_MIDLEMODE_SHIFT 4
#define SYSC_TYPE2_MIDLEMODE_MASK (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
+#define SYSC_TYPE2_DMADISABLE_SHIFT 16
+#define SYSC_TYPE2_DMADISABLE_MASK (0x1 << SYSC_TYPE2_DMADISABLE_SHIFT)
+
+/*
+ * OCP SYSCONFIG bit shifts/masks TYPE3.
+ * This is applicable for some IPs present in AM33XX
+ */
+#define SYSC_TYPE3_SIDLEMODE_SHIFT 0
+#define SYSC_TYPE3_SIDLEMODE_MASK (0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT)
+#define SYSC_TYPE3_MIDLEMODE_SHIFT 2
+#define SYSC_TYPE3_MIDLEMODE_MASK (0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT)
/* OCP SYSSTATUS bit shifts/masks */
#define SYSS_RESETDONE_SHIFT 0
@@ -283,6 +295,7 @@
#define SYSS_HAS_RESET_STATUS (1 << 7)
#define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */
#define SYSC_HAS_RESET_STATUS (1 << 9)
+#define SYSC_HAS_DMADISABLE (1 << 10)
/* omap_hwmod_sysconfig.clockact flags */
#define CLOCKACT_TEST_BOTH 0x0
@@ -298,6 +311,7 @@
* @enwkup_shift: Offset of the enawakeup bit
* @srst_shift: Offset of the softreset bit
* @autoidle_shift: Offset of the autoidle bit
+ * @dmadisable_shift: Offset of the dmadisable bit
*/
struct omap_hwmod_sysc_fields {
u8 midle_shift;
@@ -306,6 +320,7 @@
u8 enwkup_shift;
u8 srst_shift;
u8 autoidle_shift;
+ u8 dmadisable_shift;
};
/**
@@ -374,11 +389,13 @@
* struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
* @clkctrl_reg: PRCM address of the clock control register
* @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
+ * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM
* @submodule_wkdep_bit: bit shift of the WKDEP range
*/
struct omap_hwmod_omap4_prcm {
u16 clkctrl_offs;
u16 rstctrl_offs;
+ u16 rstst_offs;
u16 context_offs;
u8 submodule_wkdep_bit;
u8 modulemode;
@@ -629,6 +646,10 @@
int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx);
+extern void __init omap_hwmod_init(void);
+
+const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
+
/*
* Chip variant-specific hwmod init routines - XXX should be converted
* to use initcalls once the initial boot ordering is straightened out
diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
index 9bb978e..36d6a76 100644
--- a/arch/arm/plat-omap/include/plat/sdrc.h
+++ b/arch/arm/plat-omap/include/plat/sdrc.h
@@ -123,7 +123,7 @@
u32 mr;
};
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
#else
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index b073e5f..65fce44 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -60,6 +60,17 @@
/* AM3505/3517 UART4 */
#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */
+/* AM33XX serial port */
+#define AM33XX_UART1_BASE 0x44E09000
+
+/* OMAP5 serial ports */
+#define OMAP5_UART1_BASE OMAP2_UART1_BASE
+#define OMAP5_UART2_BASE OMAP2_UART2_BASE
+#define OMAP5_UART3_BASE OMAP4_UART3_BASE
+#define OMAP5_UART4_BASE OMAP4_UART4_BASE
+#define OMAP5_UART5_BASE 0x48066000
+#define OMAP5_UART6_BASE 0x48068000
+
/* External port on Zoom2/3 */
#define ZOOM_UART_BASE 0x10000000
#define ZOOM_UART_VIRT 0xfa400000
@@ -93,6 +104,9 @@
#define TI81XXUART1 81
#define TI81XXUART2 82
#define TI81XXUART3 83
+#define AM33XXUART1 84
+#define OMAP5UART3 OMAP4UART3
+#define OMAP5UART4 OMAP4UART4
#define ZOOM_UART 95 /* Only on zoom2/3 */
/* This is only used by 8250.c for omap1510 */
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index cc3f11b..b8d19a1 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -95,6 +95,9 @@
_DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \
OMAP4UART##p)
+#define DEBUG_LL_OMAP5(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP5UART##p)
/* Zoom2/3 shift is different for UART1 and external port */
#define DEBUG_LL_ZOOM(mach) \
_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
@@ -103,6 +106,10 @@
_DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
TI81XXUART##p)
+#define DEBUG_LL_AM33XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ AM33XXUART##p)
+
static inline void __arch_decomp_setup(unsigned long arch_id)
{
int port = 0;
@@ -173,6 +180,9 @@
DEBUG_LL_OMAP4(3, omap_4430sdp);
DEBUG_LL_OMAP4(3, omap4_panda);
+ /* omap5 based boards using UART3 */
+ DEBUG_LL_OMAP5(3, omap5_sevm);
+
/* zoom2/3 external uart */
DEBUG_LL_ZOOM(omap_zoom2);
DEBUG_LL_ZOOM(omap_zoom3);
@@ -183,6 +193,8 @@
/* TI8148 base boards using UART1 */
DEBUG_LL_TI81XX(1, ti8148evm);
+ /* AM33XX base boards using UART1 */
+ DEBUG_LL_AM33XX(1, am335xevm);
} while (0);
}
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 762eeb0..548a4c8 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -44,6 +44,8 @@
struct regulator *regulator[OMAP3_HS_USB_PORTS];
};
+#ifdef CONFIG_ARCH_OMAP2PLUS
+
struct ehci_hcd_omap_platform_data {
enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
int reset_gpio_port[OMAP3_HS_USB_PORTS];
@@ -64,26 +66,6 @@
};
/*-------------------------------------------------------------------------*/
-#define OMAP1_OTG_BASE 0xfffb0400
-#define OMAP1_UDC_BASE 0xfffb4000
-#define OMAP1_OHCI_BASE 0xfffba000
-
-#define OMAP2_OHCI_BASE 0x4805e000
-#define OMAP2_UDC_BASE 0x4805e200
-#define OMAP2_OTG_BASE 0x4805e300
-
-#ifdef CONFIG_ARCH_OMAP1
-
-#define OTG_BASE OMAP1_OTG_BASE
-#define UDC_BASE OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
-
-#else
-
-#define OTG_BASE OMAP2_OTG_BASE
-#define UDC_BASE OMAP2_UDC_BASE
-#define OMAP_OHCI_BASE OMAP2_OHCI_BASE
-
struct omap_musb_board_data {
u8 interface_type;
u8 mode;
@@ -107,44 +89,6 @@
extern int omap4430_phy_exit(struct device *dev);
extern int omap4430_phy_suspend(struct device *dev, int suspend);
-/*
- * NOTE: Please update omap USB drivers to use ioremap + read/write
- */
-
-#define OMAP2_L4_IO_OFFSET 0xb2000000
-#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET)
-
-static inline u8 omap_readb(u32 pa)
-{
- return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
-}
-
-static inline u16 omap_readw(u32 pa)
-{
- return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
-}
-
-static inline u32 omap_readl(u32 pa)
-{
- return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
-}
-
-static inline void omap_writeb(u8 v, u32 pa)
-{
- __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-
-
-static inline void omap_writew(u16 v, u32 pa)
-{
- __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-
-static inline void omap_writel(u32 v, u32 pa)
-{
- __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-
#endif
extern void am35x_musb_reset(void);
@@ -153,142 +97,6 @@
extern void am35x_set_mode(u8 musb_mode);
extern void ti81xx_musb_phy_power(u8 on);
-/*
- * FIXME correct answer depends on hmc_mode,
- * as does (on omap1) any nonzero value for config->otg port number
- */
-#ifdef CONFIG_USB_GADGET_OMAP
-#define is_usb0_device(config) 1
-#else
-#define is_usb0_device(config) 0
-#endif
-
-void omap_otg_init(struct omap_usb_config *config);
-
-#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
-void omap1_usb_init(struct omap_usb_config *pdata);
-#else
-static inline void omap1_usb_init(struct omap_usb_config *pdata)
-{
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE)
-void omap2_usbfs_init(struct omap_usb_config *pdata);
-#else
-static inline void omap2_usbfs_init(struct omap_usb_config *pdata)
-{
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * OTG and transceiver registers, for OMAPs starting with ARM926
- */
-#define OTG_REV (OTG_BASE + 0x00)
-#define OTG_SYSCON_1 (OTG_BASE + 0x04)
-# define USB2_TRX_MODE(w) (((w)>>24)&0x07)
-# define USB1_TRX_MODE(w) (((w)>>20)&0x07)
-# define USB0_TRX_MODE(w) (((w)>>16)&0x07)
-# define OTG_IDLE_EN (1 << 15)
-# define HST_IDLE_EN (1 << 14)
-# define DEV_IDLE_EN (1 << 13)
-# define OTG_RESET_DONE (1 << 2)
-# define OTG_SOFT_RESET (1 << 1)
-#define OTG_SYSCON_2 (OTG_BASE + 0x08)
-# define OTG_EN (1 << 31)
-# define USBX_SYNCHRO (1 << 30)
-# define OTG_MST16 (1 << 29)
-# define SRP_GPDATA (1 << 28)
-# define SRP_GPDVBUS (1 << 27)
-# define SRP_GPUVBUS(w) (((w)>>24)&0x07)
-# define A_WAIT_VRISE(w) (((w)>>20)&0x07)
-# define B_ASE_BRST(w) (((w)>>16)&0x07)
-# define SRP_DPW (1 << 14)
-# define SRP_DATA (1 << 13)
-# define SRP_VBUS (1 << 12)
-# define OTG_PADEN (1 << 10)
-# define HMC_PADEN (1 << 9)
-# define UHOST_EN (1 << 8)
-# define HMC_TLLSPEED (1 << 7)
-# define HMC_TLLATTACH (1 << 6)
-# define OTG_HMC(w) (((w)>>0)&0x3f)
-#define OTG_CTRL (OTG_BASE + 0x0c)
-# define OTG_USB2_EN (1 << 29)
-# define OTG_USB2_DP (1 << 28)
-# define OTG_USB2_DM (1 << 27)
-# define OTG_USB1_EN (1 << 26)
-# define OTG_USB1_DP (1 << 25)
-# define OTG_USB1_DM (1 << 24)
-# define OTG_USB0_EN (1 << 23)
-# define OTG_USB0_DP (1 << 22)
-# define OTG_USB0_DM (1 << 21)
-# define OTG_ASESSVLD (1 << 20)
-# define OTG_BSESSEND (1 << 19)
-# define OTG_BSESSVLD (1 << 18)
-# define OTG_VBUSVLD (1 << 17)
-# define OTG_ID (1 << 16)
-# define OTG_DRIVER_SEL (1 << 15)
-# define OTG_A_SETB_HNPEN (1 << 12)
-# define OTG_A_BUSREQ (1 << 11)
-# define OTG_B_HNPEN (1 << 9)
-# define OTG_B_BUSREQ (1 << 8)
-# define OTG_BUSDROP (1 << 7)
-# define OTG_PULLDOWN (1 << 5)
-# define OTG_PULLUP (1 << 4)
-# define OTG_DRV_VBUS (1 << 3)
-# define OTG_PD_VBUS (1 << 2)
-# define OTG_PU_VBUS (1 << 1)
-# define OTG_PU_ID (1 << 0)
-#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */
-# define DRIVER_SWITCH (1 << 15)
-# define A_VBUS_ERR (1 << 13)
-# define A_REQ_TMROUT (1 << 12)
-# define A_SRP_DETECT (1 << 11)
-# define B_HNP_FAIL (1 << 10)
-# define B_SRP_TMROUT (1 << 9)
-# define B_SRP_DONE (1 << 8)
-# define B_SRP_STARTED (1 << 7)
-# define OPRT_CHG (1 << 0)
-#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */
- // same bits as in IRQ_EN
-#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */
-# define OTGVPD (1 << 14)
-# define OTGVPU (1 << 13)
-# define OTGPUID (1 << 12)
-# define USB2VDR (1 << 10)
-# define USB2PDEN (1 << 9)
-# define USB2PUEN (1 << 8)
-# define USB1VDR (1 << 6)
-# define USB1PDEN (1 << 5)
-# define USB1PUEN (1 << 4)
-# define USB0VDR (1 << 2)
-# define USB0PDEN (1 << 1)
-# define USB0PUEN (1 << 0)
-#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */
-#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */
-
-/*-------------------------------------------------------------------------*/
-
-/* OMAP1 */
-#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064)
-# define CONF_USB2_UNI_R (1 << 8)
-# define CONF_USB1_UNI_R (1 << 7)
-# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7)
-# define CONF_USB0_ISOLATE_R (1 << 3)
-# define CONF_USB_PWRDN_DM_R (1 << 2)
-# define CONF_USB_PWRDN_DP_R (1 << 1)
-
-/* OMAP2 */
-# define USB_UNIDIR 0x0
-# define USB_UNIDIR_TLL 0x1
-# define USB_BIDIR 0x2
-# define USB_BIDIR_TLL 0x3
-# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2)))
-# define USBT2TLL5PI (1 << 17)
-# define USB0PUENACTLOI (1 << 16)
-# define USBSTANDBYCTRL (1 << 15)
/* AM35x */
/* USB 2.0 PHY Control */
#define CONF2_PHY_GPIOMODE (1 << 23)
diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h
index 0a6a482..5be4d5d 100644
--- a/arch/arm/plat-omap/include/plat/voltage.h
+++ b/arch/arm/plat-omap/include/plat/voltage.h
@@ -11,10 +11,29 @@
#ifndef __ARCH_ARM_OMAP_VOLTAGE_H
#define __ARCH_ARM_OMAP_VOLTAGE_H
+/**
+ * struct omap_volt_data - Omap voltage specific data.
+ * @voltage_nominal: The possible voltage value in uV
+ * @sr_efuse_offs: The offset of the efuse register(from system
+ * control module base address) from where to read
+ * the n-target value for the smartreflex module.
+ * @sr_errminlimit: Error min limit value for smartreflex. This value
+ * differs at differnet opp and thus is linked
+ * with voltage.
+ * @vp_errorgain: Error gain value for the voltage processor. This
+ * field also differs according to the voltage/opp.
+ */
+struct omap_volt_data {
+ u32 volt_nominal;
+ u32 sr_efuse_offs;
+ u8 sr_errminlimit;
+ u8 vp_errgain;
+};
struct voltagedomain;
struct voltagedomain *voltdm_lookup(const char *name);
int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
-
+struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
+ unsigned long volt);
#endif
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index ad32621..5e13c38 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -282,6 +282,8 @@
}
mbox->rxq = mq;
mq->mbox = mbox;
+
+ omap_mbox_enable_irq(mbox, IRQ_RX);
}
mutex_unlock(&mbox_configured_lock);
return 0;
@@ -305,6 +307,7 @@
mutex_lock(&mbox_configured_lock);
if (!--mbox->use_count) {
+ omap_mbox_disable_irq(mbox, IRQ_RX);
free_irq(mbox->irq, mbox);
tasklet_kill(&mbox->txq->tasklet);
flush_work_sync(&mbox->rxq->work);
@@ -338,13 +341,15 @@
if (!mbox)
return ERR_PTR(-ENOENT);
- ret = omap_mbox_startup(mbox);
- if (ret)
- return ERR_PTR(-ENODEV);
-
if (nb)
blocking_notifier_chain_register(&mbox->notifier, nb);
+ ret = omap_mbox_startup(mbox);
+ if (ret) {
+ blocking_notifier_chain_unregister(&mbox->notifier, nb);
+ return ERR_PTR(-ENODEV);
+ }
+
return mbox;
}
EXPORT_SYMBOL(omap_mbox_get);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 477363c..766181c 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -6,8 +6,8 @@
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Copyright (C) 2009-2012 Texas Instruments
+ * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -44,6 +44,7 @@
#else
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
#endif
+#define OMAP5_SRAM_PA 0x40300000
#if defined(CONFIG_ARCH_OMAP2PLUS)
#define SRAM_BOOTLOADER_SZ 0x00
@@ -85,7 +86,7 @@
__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
}
- if (cpu_is_omap34xx() && !cpu_is_am33xx()) {
+ if (cpu_is_omap34xx()) {
__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
@@ -118,12 +119,15 @@
} else if (cpu_is_omap44xx()) {
omap_sram_start = OMAP4_SRAM_PUB_PA;
omap_sram_size = 0xa000; /* 40K */
+ } else if (soc_is_omap54xx()) {
+ omap_sram_start = OMAP5_SRAM_PA;
+ omap_sram_size = SZ_128K; /* 128KB */
} else {
omap_sram_start = OMAP2_SRAM_PUB_PA;
omap_sram_size = 0x800; /* 2K */
}
} else {
- if (cpu_is_am33xx()) {
+ if (soc_is_am33xx()) {
omap_sram_start = AM33XX_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else if (cpu_is_omap34xx()) {
@@ -132,6 +136,9 @@
} else if (cpu_is_omap44xx()) {
omap_sram_start = OMAP4_SRAM_PA;
omap_sram_size = 0xe000; /* 56K */
+ } else if (soc_is_omap54xx()) {
+ omap_sram_start = OMAP5_SRAM_PA;
+ omap_sram_size = SZ_128K; /* 128KB */
} else {
omap_sram_start = OMAP2_SRAM_PA;
if (cpu_is_omap242x())
@@ -386,7 +393,7 @@
omap242x_sram_init();
else if (cpu_is_omap2430())
omap243x_sram_init();
- else if (cpu_is_am33xx())
+ else if (soc_is_am33xx())
am33xx_sram_init();
else if (cpu_is_omap34xx())
omap34xx_sram_init();
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
deleted file mode 100644
index daa0327..0000000
--- a/arch/arm/plat-omap/usb.c
+++ /dev/null
@@ -1,145 +0,0 @@
- /*
- * arch/arm/plat-omap/usb.c -- platform level USB initialization
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <plat/usb.h>
-#include <plat/board.h>
-
-#include <mach/hardware.h>
-
-#ifdef CONFIG_ARCH_OMAP_OTG
-
-void __init
-omap_otg_init(struct omap_usb_config *config)
-{
- u32 syscon;
- int alt_pingroup = 0;
-
- /* NOTE: no bus or clock setup (yet?) */
-
- syscon = omap_readl(OTG_SYSCON_1) & 0xffff;
- if (!(syscon & OTG_RESET_DONE))
- pr_debug("USB resets not complete?\n");
-
- //omap_writew(0, OTG_IRQ_EN);
-
- /* pin muxing and transceiver pinouts */
- if (config->pins[0] > 2) /* alt pingroup 2 */
- alt_pingroup = 1;
- syscon |= config->usb0_init(config->pins[0], is_usb0_device(config));
- syscon |= config->usb1_init(config->pins[1]);
- syscon |= config->usb2_init(config->pins[2], alt_pingroup);
- pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
- omap_writel(syscon, OTG_SYSCON_1);
-
- syscon = config->hmc_mode;
- syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
-#ifdef CONFIG_USB_OTG
- if (config->otg)
- syscon |= OTG_EN;
-#endif
- if (cpu_class_is_omap1())
- pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
- omap_readl(USB_TRANSCEIVER_CTRL));
- pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
- omap_writel(syscon, OTG_SYSCON_2);
-
- printk("USB: hmc %d", config->hmc_mode);
- if (!alt_pingroup)
- printk(", usb2 alt %d wires", config->pins[2]);
- else if (config->pins[0])
- printk(", usb0 %d wires%s", config->pins[0],
- is_usb0_device(config) ? " (dev)" : "");
- if (config->pins[1])
- printk(", usb1 %d wires", config->pins[1]);
- if (!alt_pingroup && config->pins[2])
- printk(", usb2 %d wires", config->pins[2]);
- if (config->otg)
- printk(", Mini-AB on usb%d", config->otg - 1);
- printk("\n");
-
- if (cpu_class_is_omap1()) {
- u16 w;
-
- /* leave USB clocks/controllers off until needed */
- w = omap_readw(ULPD_SOFT_REQ);
- w &= ~SOFT_USB_CLK_REQ;
- omap_writew(w, ULPD_SOFT_REQ);
-
- w = omap_readw(ULPD_CLOCK_CTRL);
- w &= ~USB_MCLK_EN;
- w |= DIS_USB_PVCI_CLK;
- omap_writew(w, ULPD_CLOCK_CTRL);
- }
- syscon = omap_readl(OTG_SYSCON_1);
- syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
-
-#ifdef CONFIG_USB_GADGET_OMAP
- if (config->otg || config->register_dev) {
- struct platform_device *udc_device = config->udc_device;
- int status;
-
- syscon &= ~DEV_IDLE_EN;
- udc_device->dev.platform_data = config;
- status = platform_device_register(udc_device);
- if (status)
- pr_debug("can't register UDC device, %d\n", status);
- }
-#endif
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- if (config->otg || config->register_host) {
- struct platform_device *ohci_device = config->ohci_device;
- int status;
-
- syscon &= ~HST_IDLE_EN;
- ohci_device->dev.platform_data = config;
- status = platform_device_register(ohci_device);
- if (status)
- pr_debug("can't register OHCI device, %d\n", status);
- }
-#endif
-
-#ifdef CONFIG_USB_OTG
- if (config->otg) {
- struct platform_device *otg_device = config->otg_device;
- int status;
-
- syscon &= ~OTG_IDLE_EN;
- otg_device->dev.platform_data = config;
- status = platform_device_register(otg_device);
- if (status)
- pr_debug("can't register OTG device, %d\n", status);
- }
-#endif
- pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
- omap_writel(syscon, OTG_SYSCON_1);
-}
-
-#else
-void omap_otg_init(struct omap_usb_config *config) {}
-#endif
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 61fd837..c179378 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -582,7 +582,7 @@
* Watchdog
****************************************************************************/
static struct resource orion_wdt_resource =
- DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28);
+ DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28);
static struct platform_device orion_wdt_device = {
.name = "orion_wdt",
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index 58b7980..584c9bf8 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -193,6 +193,7 @@
{ "pxa25x-nssp", PXA25x_NSSP },
{ "pxa27x-ssp", PXA27x_SSP },
{ "pxa168-ssp", PXA168_SSP },
+ { "pxa910-ssp", PXA910_SSP },
{ },
};
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index bc42c04..fe57bbb 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -533,7 +533,7 @@
int i;
#ifdef CONFIG_FIQ
- init_FIQ();
+ init_FIQ(FIQ_START);
#endif
irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index a2fae4e..7aca31c 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -78,6 +78,10 @@
# clock options
+config SAMSUNG_CLOCK
+ bool
+ default y if !COMMON_CLK
+
config SAMSUNG_CLKSRC
bool
help
@@ -491,14 +495,6 @@
Internal config node to apply common S5P sleep management code.
Can be selected by S5P and newer SoCs with similar sleep procedure.
-comment "Power Domain"
-
-config SAMSUNG_PD
- bool "Samsung Power Domain"
- depends on PM_RUNTIME
- help
- Say Y here if you want to control Power Domain by Runtime PM.
-
config DEBUG_S3C_UART
depends on PLAT_SAMSUNG
int
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 860b2db..b787174 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -15,8 +15,8 @@
obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
obj-$(CONFIG_S5P_HRT) += s5p-time.o
-obj-y += clock.o
-obj-y += pwm-clock.o
+obj-$(CONFIG_SAMSUNG_CLOCK) += clock.o
+obj-$(CONFIG_SAMSUNG_CLOCK) += pwm-clock.o
obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o
obj-$(CONFIG_S5P_CLOCK) += s5p-clock.o
@@ -60,10 +60,6 @@
obj-$(CONFIG_S5P_PM) += s5p-pm.o s5p-irq-pm.o
obj-$(CONFIG_S5P_SLEEP) += s5p-sleep.o
-# PD support
-
-obj-$(CONFIG_SAMSUNG_PD) += pd.o
-
# PWM support
obj-$(CONFIG_HAVE_PWM) += pwm.o
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index 33ecd0c..b1e05cc 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -157,11 +157,13 @@
return -EINVAL;
}
- if (client->is_ts && adc->ts_pend)
- return -EAGAIN;
-
spin_lock_irqsave(&adc->lock, flags);
+ if (client->is_ts && adc->ts_pend) {
+ spin_unlock_irqrestore(&adc->lock, flags);
+ return -EAGAIN;
+ }
+
client->channel = channel;
client->nr_samples = nr_samples;
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 1d214cb..74e31ce 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -126,7 +126,8 @@
#ifdef CONFIG_CPU_S3C2440
static struct resource s3c_camif_resource[] = {
[0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF),
- [1] = DEFINE_RES_IRQ(IRQ_CAM),
+ [1] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_C),
+ [2] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_P),
};
struct platform_device s3c_device_camif = {
@@ -1512,7 +1513,7 @@
};
struct platform_device s3c64xx_device_spi0 = {
- .name = "s3c64xx-spi",
+ .name = "s3c6410-spi",
.id = 0,
.num_resources = ARRAY_SIZE(s3c64xx_spi0_resource),
.resource = s3c64xx_spi0_resource,
@@ -1522,13 +1523,10 @@
},
};
-void __init s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd,
- int src_clk_nr, int num_cs)
+void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+ int num_cs)
{
- if (!pd) {
- pr_err("%s:Need to pass platform data\n", __func__);
- return;
- }
+ struct s3c64xx_spi_info pd;
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0) {
@@ -1536,12 +1534,11 @@
return;
}
- pd->num_cs = num_cs;
- pd->src_clk_nr = src_clk_nr;
- if (!pd->cfg_gpio)
- pd->cfg_gpio = s3c64xx_spi0_cfg_gpio;
+ pd.num_cs = num_cs;
+ pd.src_clk_nr = src_clk_nr;
+ pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
- s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi0);
+ s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0);
}
#endif /* CONFIG_S3C64XX_DEV_SPI0 */
@@ -1554,7 +1551,7 @@
};
struct platform_device s3c64xx_device_spi1 = {
- .name = "s3c64xx-spi",
+ .name = "s3c6410-spi",
.id = 1,
.num_resources = ARRAY_SIZE(s3c64xx_spi1_resource),
.resource = s3c64xx_spi1_resource,
@@ -1564,26 +1561,20 @@
},
};
-void __init s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd,
- int src_clk_nr, int num_cs)
+void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+ int num_cs)
{
- if (!pd) {
- pr_err("%s:Need to pass platform data\n", __func__);
- return;
- }
-
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0) {
pr_err("%s: Invalid SPI configuration\n", __func__);
return;
}
- pd->num_cs = num_cs;
- pd->src_clk_nr = src_clk_nr;
- if (!pd->cfg_gpio)
- pd->cfg_gpio = s3c64xx_spi1_cfg_gpio;
+ pd.num_cs = num_cs;
+ pd.src_clk_nr = src_clk_nr;
+ pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
- s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi1);
+ s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
}
#endif /* CONFIG_S3C64XX_DEV_SPI1 */
@@ -1596,7 +1587,7 @@
};
struct platform_device s3c64xx_device_spi2 = {
- .name = "s3c64xx-spi",
+ .name = "s3c6410-spi",
.id = 2,
.num_resources = ARRAY_SIZE(s3c64xx_spi2_resource),
.resource = s3c64xx_spi2_resource,
@@ -1606,13 +1597,10 @@
},
};
-void __init s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
- int src_clk_nr, int num_cs)
+void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+ int num_cs)
{
- if (!pd) {
- pr_err("%s:Need to pass platform data\n", __func__);
- return;
- }
+ struct s3c64xx_spi_info pd;
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0) {
@@ -1620,11 +1608,10 @@
return;
}
- pd->num_cs = num_cs;
- pd->src_clk_nr = src_clk_nr;
- if (!pd->cfg_gpio)
- pd->cfg_gpio = s3c64xx_spi2_cfg_gpio;
+ pd.num_cs = num_cs;
+ pd.src_clk_nr = src_clk_nr;
+ pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
- s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi2);
+ s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2);
}
#endif /* CONFIG_S3C64XX_DEV_SPI2 */
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
index eb9f4f5..c38d754 100644
--- a/arch/arm/plat-samsung/dma-ops.c
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -19,72 +19,79 @@
#include <mach/dma.h>
static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
- struct samsung_dma_info *info)
+ struct samsung_dma_req *param)
{
- struct dma_chan *chan;
dma_cap_mask_t mask;
- struct dma_slave_config slave_config;
void *filter_param;
dma_cap_zero(mask);
- dma_cap_set(info->cap, mask);
+ dma_cap_set(param->cap, mask);
/*
* If a dma channel property of a device node from device tree is
* specified, use that as the fliter parameter.
*/
- filter_param = (dma_ch == DMACH_DT_PROP) ? (void *)info->dt_dmach_prop :
- (void *)dma_ch;
- chan = dma_request_channel(mask, pl330_filter, filter_param);
-
- if (info->direction == DMA_DEV_TO_MEM) {
- memset(&slave_config, 0, sizeof(struct dma_slave_config));
- slave_config.direction = info->direction;
- slave_config.src_addr = info->fifo;
- slave_config.src_addr_width = info->width;
- slave_config.src_maxburst = 1;
- dmaengine_slave_config(chan, &slave_config);
- } else if (info->direction == DMA_MEM_TO_DEV) {
- memset(&slave_config, 0, sizeof(struct dma_slave_config));
- slave_config.direction = info->direction;
- slave_config.dst_addr = info->fifo;
- slave_config.dst_addr_width = info->width;
- slave_config.dst_maxburst = 1;
- dmaengine_slave_config(chan, &slave_config);
- }
-
- return (unsigned)chan;
+ filter_param = (dma_ch == DMACH_DT_PROP) ?
+ (void *)param->dt_dmach_prop : (void *)dma_ch;
+ return (unsigned)dma_request_channel(mask, pl330_filter, filter_param);
}
-static int samsung_dmadev_release(unsigned ch,
- struct s3c2410_dma_client *client)
+static int samsung_dmadev_release(unsigned ch, void *param)
{
dma_release_channel((struct dma_chan *)ch);
return 0;
}
+static int samsung_dmadev_config(unsigned ch,
+ struct samsung_dma_config *param)
+{
+ struct dma_chan *chan = (struct dma_chan *)ch;
+ struct dma_slave_config slave_config;
+
+ if (param->direction == DMA_DEV_TO_MEM) {
+ memset(&slave_config, 0, sizeof(struct dma_slave_config));
+ slave_config.direction = param->direction;
+ slave_config.src_addr = param->fifo;
+ slave_config.src_addr_width = param->width;
+ slave_config.src_maxburst = 1;
+ dmaengine_slave_config(chan, &slave_config);
+ } else if (param->direction == DMA_MEM_TO_DEV) {
+ memset(&slave_config, 0, sizeof(struct dma_slave_config));
+ slave_config.direction = param->direction;
+ slave_config.dst_addr = param->fifo;
+ slave_config.dst_addr_width = param->width;
+ slave_config.dst_maxburst = 1;
+ dmaengine_slave_config(chan, &slave_config);
+ } else {
+ pr_warn("unsupported direction\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int samsung_dmadev_prepare(unsigned ch,
- struct samsung_dma_prep_info *info)
+ struct samsung_dma_prep *param)
{
struct scatterlist sg;
struct dma_chan *chan = (struct dma_chan *)ch;
struct dma_async_tx_descriptor *desc;
- switch (info->cap) {
+ switch (param->cap) {
case DMA_SLAVE:
sg_init_table(&sg, 1);
- sg_dma_len(&sg) = info->len;
- sg_set_page(&sg, pfn_to_page(PFN_DOWN(info->buf)),
- info->len, offset_in_page(info->buf));
- sg_dma_address(&sg) = info->buf;
+ sg_dma_len(&sg) = param->len;
+ sg_set_page(&sg, pfn_to_page(PFN_DOWN(param->buf)),
+ param->len, offset_in_page(param->buf));
+ sg_dma_address(&sg) = param->buf;
desc = dmaengine_prep_slave_sg(chan,
- &sg, 1, info->direction, DMA_PREP_INTERRUPT);
+ &sg, 1, param->direction, DMA_PREP_INTERRUPT);
break;
case DMA_CYCLIC:
- desc = dmaengine_prep_dma_cyclic(chan,
- info->buf, info->len, info->period, info->direction);
+ desc = dmaengine_prep_dma_cyclic(chan, param->buf,
+ param->len, param->period, param->direction);
break;
default:
dev_err(&chan->dev->device, "unsupported format\n");
@@ -96,8 +103,8 @@
return -EFAULT;
}
- desc->callback = info->fp;
- desc->callback_param = info->fp_param;
+ desc->callback = param->fp;
+ desc->callback_param = param->fp_param;
dmaengine_submit((struct dma_async_tx_descriptor *)desc);
@@ -119,6 +126,7 @@
static struct samsung_dma_ops dmadev_ops = {
.request = samsung_dmadev_request,
.release = samsung_dmadev_release,
+ .config = samsung_dmadev_config,
.prepare = samsung_dmadev_prepare,
.trigger = samsung_dmadev_trigger,
.started = NULL,
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 0721293..ace4451 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -132,6 +132,10 @@
#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
+#ifndef KHZ
+#define KHZ (1000)
+#endif
+
#ifndef MHZ
#define MHZ (1000*1000)
#endif
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 61ca2f3..5da4b4f 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -131,7 +131,6 @@
extern struct platform_device exynos4_device_pcm0;
extern struct platform_device exynos4_device_pcm1;
extern struct platform_device exynos4_device_pcm2;
-extern struct platform_device exynos4_device_pd[];
extern struct platform_device exynos4_device_spdif;
extern struct platform_device exynos_device_drm;
diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h
index 71a6827..f5144cd 100644
--- a/arch/arm/plat-samsung/include/plat/dma-ops.h
+++ b/arch/arm/plat-samsung/include/plat/dma-ops.h
@@ -16,7 +16,13 @@
#include <linux/dmaengine.h>
#include <mach/dma.h>
-struct samsung_dma_prep_info {
+struct samsung_dma_req {
+ enum dma_transaction_type cap;
+ struct property *dt_dmach_prop;
+ struct s3c2410_dma_client *client;
+};
+
+struct samsung_dma_prep {
enum dma_transaction_type cap;
enum dma_transfer_direction direction;
dma_addr_t buf;
@@ -26,19 +32,17 @@
void *fp_param;
};
-struct samsung_dma_info {
- enum dma_transaction_type cap;
+struct samsung_dma_config {
enum dma_transfer_direction direction;
enum dma_slave_buswidth width;
dma_addr_t fifo;
- struct s3c2410_dma_client *client;
- struct property *dt_dmach_prop;
};
struct samsung_dma_ops {
- unsigned (*request)(enum dma_ch ch, struct samsung_dma_info *info);
- int (*release)(unsigned ch, struct s3c2410_dma_client *client);
- int (*prepare)(unsigned ch, struct samsung_dma_prep_info *info);
+ unsigned (*request)(enum dma_ch ch, struct samsung_dma_req *param);
+ int (*release)(unsigned ch, void *param);
+ int (*config)(unsigned ch, struct samsung_dma_config *param);
+ int (*prepare)(unsigned ch, struct samsung_dma_prep *param);
int (*trigger)(unsigned ch);
int (*started)(unsigned ch);
int (*flush)(unsigned ch);
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index 536002f..b885322 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -43,7 +43,6 @@
* @setup_gpio: Setup the external GPIO pins to the right state to transfer
* the data from the display system to the connected display
* device.
- * @default_win: default window layer number to be used for UI layer.
* @vidcon0: The base vidcon0 values to control the panel data format.
* @vidcon1: The base vidcon1 values to control the panel data output.
* @vtiming: Video timing when connected to a RGB type panel.
diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h
index 7d04875..c0c70a8 100644
--- a/arch/arm/plat-samsung/include/plat/map-s3c.h
+++ b/arch/arm/plat-samsung/include/plat/map-s3c.h
@@ -22,7 +22,7 @@
#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
-#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
+#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00100000)
#define S3C2410_PA_UART (0x50000000)
#define S3C24XX_PA_UART S3C2410_PA_UART
diff --git a/arch/arm/plat-samsung/include/plat/pd.h b/arch/arm/plat-samsung/include/plat/pd.h
deleted file mode 100644
index abb4bc3..0000000
--- a/arch/arm/plat-samsung/include/plat/pd.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/pd.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_SAMSUNG_PD_H
-#define __ASM_PLAT_SAMSUNG_PD_H __FILE__
-
-struct samsung_pd_info {
- int (*enable)(struct device *dev);
- int (*disable)(struct device *dev);
- void __iomem *base;
-};
-
-enum exynos4_pd_block {
- PD_MFC,
- PD_G3D,
- PD_LCD0,
- PD_LCD1,
- PD_TV,
- PD_CAM,
- PD_GPS
-};
-
-#endif /* __ASM_PLAT_SAMSUNG_PD_H */
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
index fa95e9a..ceba18d 100644
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -18,7 +18,6 @@
* @fb_delay: Slave specific feedback delay.
* Refer to FB_CLK_SEL register definition in SPI chapter.
* @line: Custom 'identity' of the CS line.
- * @set_level: CS line control.
*
* This is per SPI-Slave Chipselect information.
* Allocate and initialize one in machine init code and make the
@@ -27,57 +26,41 @@
struct s3c64xx_spi_csinfo {
u8 fb_delay;
unsigned line;
- void (*set_level)(unsigned line_id, int lvl);
};
/**
* struct s3c64xx_spi_info - SPI Controller defining structure
* @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
- * @clk_from_cmu: If the SPI clock/prescalar control block is present
- * by the platform's clock-management-unit and not in SPI controller.
* @num_cs: Number of CS this controller emulates.
* @cfg_gpio: Configure pins for this SPI controller.
- * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6
- * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number
- * @high_speed: If the controller supports HIGH_SPEED_EN bit
- * @tx_st_done: Depends on tx fifo_lvl field
*/
struct s3c64xx_spi_info {
int src_clk_nr;
- bool clk_from_cmu;
-
int num_cs;
-
- int (*cfg_gpio)(struct platform_device *pdev);
-
- /* Following two fields are for future compatibility */
- int fifo_lvl_mask;
- int rx_lvl_offset;
- int high_speed;
- int tx_st_done;
+ int (*cfg_gpio)(void);
};
/**
* s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
* initialization code.
- * @pd: SPI platform data to set.
+ * @cfg_gpio: Pointer to gpio setup function.
* @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
* @num_cs: Number of elements in the 'cs' array.
*
* Call this from machine init code for each SPI Controller that
* has some chips attached to it.
*/
-extern void s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd,
- int src_clk_nr, int num_cs);
-extern void s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd,
- int src_clk_nr, int num_cs);
-extern void s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
- int src_clk_nr, int num_cs);
+extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+ int num_cs);
+extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+ int num_cs);
+extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+ int num_cs);
/* defined by architecture to configure gpio */
-extern int s3c64xx_spi0_cfg_gpio(struct platform_device *dev);
-extern int s3c64xx_spi1_cfg_gpio(struct platform_device *dev);
-extern int s3c64xx_spi2_cfg_gpio(struct platform_device *dev);
+extern int s3c64xx_spi0_cfg_gpio(void);
+extern int s3c64xx_spi1_cfg_gpio(void);
+extern int s3c64xx_spi2_cfg_gpio(void);
extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;
diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
index f19aff1..bc4db9b 100644
--- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h
+++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
@@ -25,7 +25,7 @@
__raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
- if (s3c2410_wdtclk)
+ if (!IS_ERR(s3c2410_wdtclk))
clk_enable(s3c2410_wdtclk);
/* put initial values into count and data */
diff --git a/arch/arm/plat-samsung/pd.c b/arch/arm/plat-samsung/pd.c
deleted file mode 100644
index 312b510..0000000
--- a/arch/arm/plat-samsung/pd.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/* linux/arch/arm/plat-samsung/pd.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Samsung Power domain support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/pm_runtime.h>
-
-#include <plat/pd.h>
-
-static int samsung_pd_probe(struct platform_device *pdev)
-{
- struct samsung_pd_info *pdata = pdev->dev.platform_data;
- struct device *dev = &pdev->dev;
-
- if (!pdata) {
- dev_err(dev, "no device data specified\n");
- return -ENOENT;
- }
-
- pm_runtime_set_active(dev);
- pm_runtime_enable(dev);
-
- dev_info(dev, "power domain registered\n");
- return 0;
-}
-
-static int __devexit samsung_pd_remove(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
-
- pm_runtime_disable(dev);
- return 0;
-}
-
-static int samsung_pd_runtime_suspend(struct device *dev)
-{
- struct samsung_pd_info *pdata = dev->platform_data;
- int ret = 0;
-
- if (pdata->disable)
- ret = pdata->disable(dev);
-
- dev_dbg(dev, "suspended\n");
- return ret;
-}
-
-static int samsung_pd_runtime_resume(struct device *dev)
-{
- struct samsung_pd_info *pdata = dev->platform_data;
- int ret = 0;
-
- if (pdata->enable)
- ret = pdata->enable(dev);
-
- dev_dbg(dev, "resumed\n");
- return ret;
-}
-
-static const struct dev_pm_ops samsung_pd_pm_ops = {
- .runtime_suspend = samsung_pd_runtime_suspend,
- .runtime_resume = samsung_pd_runtime_resume,
-};
-
-static struct platform_driver samsung_pd_driver = {
- .driver = {
- .name = "samsung-pd",
- .owner = THIS_MODULE,
- .pm = &samsung_pd_pm_ops,
- },
- .probe = samsung_pd_probe,
- .remove = __devexit_p(samsung_pd_remove),
-};
-
-static int __init samsung_pd_init(void)
-{
- int ret;
-
- ret = platform_driver_register(&samsung_pd_driver);
- if (ret)
- printk(KERN_ERR "%s: failed to add PD driver\n", __func__);
-
- return ret;
-}
-arch_initcall(samsung_pd_init);
diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c
index c559d84..d358305 100644
--- a/arch/arm/plat-samsung/pwm.c
+++ b/arch/arm/plat-samsung/pwm.c
@@ -36,7 +36,6 @@
unsigned int duty_ns;
unsigned char tcon_base;
- unsigned char running;
unsigned char use_count;
unsigned char pwm_id;
};
@@ -116,7 +115,6 @@
local_irq_restore(flags);
- pwm->running = 1;
return 0;
}
@@ -134,8 +132,6 @@
__raw_writel(tcon, S3C2410_TCON);
local_irq_restore(flags);
-
- pwm->running = 0;
}
EXPORT_SYMBOL(pwm_disable);
diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c
index 7814949..f99448c 100644
--- a/arch/arm/plat-samsung/s3c-dma-ops.c
+++ b/arch/arm/plat-samsung/s3c-dma-ops.c
@@ -36,30 +36,26 @@
}
static unsigned s3c_dma_request(enum dma_ch dma_ch,
- struct samsung_dma_info *info)
+ struct samsung_dma_req *param)
{
struct cb_data *data;
- if (s3c2410_dma_request(dma_ch, info->client, NULL) < 0) {
- s3c2410_dma_free(dma_ch, info->client);
+ if (s3c2410_dma_request(dma_ch, param->client, NULL) < 0) {
+ s3c2410_dma_free(dma_ch, param->client);
return 0;
}
+ if (param->cap == DMA_CYCLIC)
+ s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR);
+
data = kzalloc(sizeof(struct cb_data), GFP_KERNEL);
data->ch = dma_ch;
list_add_tail(&data->node, &dma_list);
- s3c2410_dma_devconfig(dma_ch, info->direction, info->fifo);
-
- if (info->cap == DMA_CYCLIC)
- s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR);
-
- s3c2410_dma_config(dma_ch, info->width);
-
return (unsigned)dma_ch;
}
-static int s3c_dma_release(unsigned ch, struct s3c2410_dma_client *client)
+static int s3c_dma_release(unsigned ch, void *param)
{
struct cb_data *data;
@@ -68,16 +64,24 @@
break;
list_del(&data->node);
- s3c2410_dma_free(ch, client);
+ s3c2410_dma_free(ch, param);
kfree(data);
return 0;
}
-static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep_info *info)
+static int s3c_dma_config(unsigned ch, struct samsung_dma_config *param)
+{
+ s3c2410_dma_devconfig(ch, param->direction, param->fifo);
+ s3c2410_dma_config(ch, param->width);
+
+ return 0;
+}
+
+static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep *param)
{
struct cb_data *data;
- int len = (info->cap == DMA_CYCLIC) ? info->period : info->len;
+ int len = (param->cap == DMA_CYCLIC) ? param->period : param->len;
list_for_each_entry(data, &dma_list, node)
if (data->ch == ch)
@@ -85,11 +89,11 @@
if (!data->fp) {
s3c2410_dma_set_buffdone_fn(ch, s3c_dma_cb);
- data->fp = info->fp;
- data->fp_param = info->fp_param;
+ data->fp = param->fp;
+ data->fp_param = param->fp_param;
}
- s3c2410_dma_enqueue(ch, (void *)data, info->buf, len);
+ s3c2410_dma_enqueue(ch, (void *)data, param->buf, len);
return 0;
}
@@ -117,6 +121,7 @@
static struct samsung_dma_ops s3c_dma_ops = {
.request = s3c_dma_request,
.release = s3c_dma_release,
+ .config = s3c_dma_config,
.prepare = s3c_dma_prepare,
.trigger = s3c_dma_trigger,
.started = s3c_dma_started,
diff --git a/arch/arm/plat-samsung/s5p-clock.c b/arch/arm/plat-samsung/s5p-clock.c
index 031a618..48a1599 100644
--- a/arch/arm/plat-samsung/s5p-clock.c
+++ b/arch/arm/plat-samsung/s5p-clock.c
@@ -37,6 +37,7 @@
struct clk clk_xusbxti = {
.name = "xusbxti",
.id = -1,
+ .rate = 24000000,
};
struct clk s5p_clk_27m = {
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index ab3de72..75b05ad 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -4,7 +4,7 @@
* Debugging macro include header for spear platform
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h
index e14a3e4..2bc6b54 100644
--- a/arch/arm/plat-spear/include/plat/pl080.h
+++ b/arch/arm/plat-spear/include/plat/pl080.h
@@ -4,7 +4,7 @@
* DMAC pl080 definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/include/plat/shirq.h b/arch/arm/plat-spear/include/plat/shirq.h
index 03ed8b5..88a7fbd 100644
--- a/arch/arm/plat-spear/include/plat/shirq.h
+++ b/arch/arm/plat-spear/include/plat/shirq.h
@@ -4,7 +4,7 @@
* SPEAr platform shared irq layer header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/plat-spear/include/plat/timex.h
index 914d09d..ef95e5b 100644
--- a/arch/arm/plat-spear/include/plat/timex.h
+++ b/arch/arm/plat-spear/include/plat/timex.h
@@ -4,7 +4,7 @@
* SPEAr platform specific timex definitions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h
index 6dd455b..2ce6cb1 100644
--- a/arch/arm/plat-spear/include/plat/uncompress.h
+++ b/arch/arm/plat-spear/include/plat/uncompress.h
@@ -4,7 +4,7 @@
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c
index a56a067..12cf27f 100644
--- a/arch/arm/plat-spear/pl080.c
+++ b/arch/arm/plat-spear/pl080.c
@@ -4,7 +4,7 @@
* DMAC pl080 definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c
index ea0a613..4f99011 100644
--- a/arch/arm/plat-spear/restart.c
+++ b/arch/arm/plat-spear/restart.c
@@ -4,7 +4,7 @@
* SPEAr platform specific restart functions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/shirq.c b/arch/arm/plat-spear/shirq.c
index 961fb72..853e891e 100644
--- a/arch/arm/plat-spear/shirq.c
+++ b/arch/arm/plat-spear/shirq.c
@@ -4,7 +4,7 @@
* SPEAr platform shared irq layer source file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig
index 81ee7cc..8d5c10a 100644
--- a/arch/arm/plat-versatile/Kconfig
+++ b/arch/arm/plat-versatile/Kconfig
@@ -1,5 +1,8 @@
if PLAT_VERSATILE
+config PLAT_VERSATILE_CLOCK
+ bool
+
config PLAT_VERSATILE_CLCD
bool
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
index a5cb194..272769a8 100644
--- a/arch/arm/plat-versatile/Makefile
+++ b/arch/arm/plat-versatile/Makefile
@@ -1,4 +1,4 @@
-obj-y := clock.o
+obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o
obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o
obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o
obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o
diff --git a/arch/h8300/include/asm/pgtable.h b/arch/h8300/include/asm/pgtable.h
index a09230a..62ef176 100644
--- a/arch/h8300/include/asm/pgtable.h
+++ b/arch/h8300/include/asm/pgtable.h
@@ -70,4 +70,7 @@
#define VMALLOC_END 0xffffffff
#define arch_enter_lazy_cpu_mode() do {} while (0)
+
+#include <asm-generic/pgtable.h>
+
#endif /* _H8300_PGTABLE_H */
diff --git a/arch/h8300/include/asm/uaccess.h b/arch/h8300/include/asm/uaccess.h
index 356068c..8725d1a 100644
--- a/arch/h8300/include/asm/uaccess.h
+++ b/arch/h8300/include/asm/uaccess.h
@@ -100,7 +100,6 @@
break; \
default: \
__gu_err = __get_user_bad(); \
- __gu_val = 0; \
break; \
} \
(x) = __gu_val; \
@@ -159,4 +158,6 @@
return 0;
}
+#define __clear_user clear_user
+
#endif /* _H8300_UACCESS_H */
diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c
index 68d6510..d0b1607f 100644
--- a/arch/h8300/kernel/setup.c
+++ b/arch/h8300/kernel/setup.c
@@ -35,6 +35,7 @@
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
+#include <asm/sections.h>
#if defined(__H8300H__)
#define CPU "H8/300H"
@@ -54,7 +55,6 @@
char __initdata command_line[COMMAND_LINE_SIZE];
-extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
extern int _ramstart, _ramend;
extern char _target_name[];
extern void h8300_gpio_init(void);
@@ -119,9 +119,9 @@
memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS;
#endif
- init_mm.start_code = (unsigned long) &_stext;
- init_mm.end_code = (unsigned long) &_etext;
- init_mm.end_data = (unsigned long) &_edata;
+ init_mm.start_code = (unsigned long) _stext;
+ init_mm.end_code = (unsigned long) _etext;
+ init_mm.end_data = (unsigned long) _edata;
init_mm.brk = (unsigned long) 0;
#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT)
@@ -134,15 +134,12 @@
printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n");
#ifdef DEBUG
- printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
- "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
- (int) &_sdata, (int) &_edata,
- (int) &_sbss, (int) &_ebss);
- printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x "
- "STACK=0x%06x-0x%06x\n",
- (int) &_ebss, (int) memory_start,
- (int) memory_start, (int) memory_end,
- (int) memory_end, (int) &_ramend);
+ printk(KERN_DEBUG "KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p "
+ "BSS=0x%p-0x%p\n", _stext, _etext, _sdata, _edata, __bss_start,
+ __bss_stop);
+ printk(KERN_DEBUG "KERNEL -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx "
+ "STACK=0x%06lx-0x%p\n", __bss_stop, memory_start, memory_start,
+ memory_end, memory_end, &_ramend);
#endif
#ifdef CONFIG_DEFAULT_CMDLINE
diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c
index fca1037..5adaada 100644
--- a/arch/h8300/kernel/signal.c
+++ b/arch/h8300/kernel/signal.c
@@ -447,7 +447,7 @@
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
-statis void do_signal(struct pt_regs *regs)
+static void do_signal(struct pt_regs *regs)
{
siginfo_t info;
int signr;
diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c
index 32263a1..e0f7419 100644
--- a/arch/h8300/kernel/time.c
+++ b/arch/h8300/kernel/time.c
@@ -27,6 +27,7 @@
#include <linux/profile.h>
#include <asm/io.h>
+#include <asm/irq_regs.h>
#include <asm/timer.h>
#define TICK_SIZE (tick_nsec / 1000)
diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c
index 973369c..981e250 100644
--- a/arch/h8300/mm/init.c
+++ b/arch/h8300/mm/init.c
@@ -36,6 +36,7 @@
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/pgtable.h>
+#include <asm/sections.h>
#undef DEBUG
@@ -123,7 +124,6 @@
int codek = 0, datak = 0, initk = 0;
/* DAVIDM look at setup memory map generically with reserved area */
unsigned long tmp;
- extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end;
extern unsigned long _ramend, _ramstart;
unsigned long len = &_ramend - &_ramstart;
unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */
@@ -142,9 +142,9 @@
/* this will put all memory onto the freelists */
totalram_pages = free_all_bootmem();
- codek = (&_etext - &_stext) >> 10;
- datak = (&_ebss - &_sdata) >> 10;
- initk = (&__init_begin - &__init_end) >> 10;
+ codek = (_etext - _stext) >> 10;
+ datak = (__bss_stop - _sdata) >> 10;
+ initk = (__init_begin - __init_end) >> 10;
tmp = nr_free_pages() << PAGE_SHIFT;
printk(KERN_INFO "Memory available: %luk/%luk RAM, %luk/%luk ROM (%dk kernel code, %dk data)\n",
@@ -178,22 +178,21 @@
{
#ifdef CONFIG_RAMKERNEL
unsigned long addr;
- extern char __init_begin, __init_end;
/*
* the following code should be cool even if these sections
* are not page aligned.
*/
- addr = PAGE_ALIGN((unsigned long)(&__init_begin));
+ addr = PAGE_ALIGN((unsigned long)(__init_begin));
/* next to check that the page we free is not a partial page */
- for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) {
+ for (; addr + PAGE_SIZE < (unsigned long)__init_end; addr +=PAGE_SIZE) {
ClearPageReserved(virt_to_page(addr));
init_page_count(virt_to_page(addr));
free_page(addr);
totalram_pages++;
}
printk(KERN_INFO "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n",
- (addr - PAGE_ALIGN((long) &__init_begin)) >> 10,
- (int)(PAGE_ALIGN((unsigned long)(&__init_begin))),
+ (addr - PAGE_ALIGN((long) __init_begin)) >> 10,
+ (int)(PAGE_ALIGN((unsigned long)__init_begin)),
(int)(addr - PAGE_SIZE));
#endif
}
diff --git a/arch/hexagon/kernel/smp.c b/arch/hexagon/kernel/smp.c
index f726462..149fbef 100644
--- a/arch/hexagon/kernel/smp.c
+++ b/arch/hexagon/kernel/smp.c
@@ -180,9 +180,7 @@
notify_cpu_starting(cpu);
- ipi_call_lock();
set_cpu_online(cpu, true);
- ipi_call_unlock();
local_irq_enable();
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 1113b8a..963d2db 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -382,7 +382,6 @@
set_numa_node(cpu_to_node_map[cpuid]);
set_numa_mem(local_memory_node(cpu_to_node_map[cpuid]));
- ipi_call_lock_irq();
spin_lock(&vector_lock);
/* Setup the per cpu irq handling data structures */
__setup_vector_irq(cpuid);
@@ -390,7 +389,6 @@
set_cpu_online(cpuid, true);
per_cpu(cpu_state, cpuid) = CPU_ONLINE;
spin_unlock(&vector_lock);
- ipi_call_unlock_irq();
smp_setup_percpu_timer();
diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile
index 177716b..01729c2 100644
--- a/arch/m32r/boot/compressed/Makefile
+++ b/arch/m32r/boot/compressed/Makefile
@@ -43,9 +43,9 @@
OBJCOPYFLAGS += -R .empty_zero_page
-suffix_$(CONFIG_KERNEL_GZIP) = gz
-suffix_$(CONFIG_KERNEL_BZIP2) = bz2
-suffix_$(CONFIG_KERNEL_LZMA) = lzma
+suffix-$(CONFIG_KERNEL_GZIP) = gz
+suffix-$(CONFIG_KERNEL_BZIP2) = bz2
+suffix-$(CONFIG_KERNEL_LZMA) = lzma
$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE
$(call if_changed,ld)
diff --git a/arch/m32r/boot/compressed/misc.c b/arch/m32r/boot/compressed/misc.c
index 370d608..28a0952 100644
--- a/arch/m32r/boot/compressed/misc.c
+++ b/arch/m32r/boot/compressed/misc.c
@@ -28,7 +28,7 @@
static unsigned long free_mem_end_ptr;
#ifdef CONFIG_KERNEL_BZIP2
-static void *memset(void *s, int c, size_t n)
+void *memset(void *s, int c, size_t n)
{
char *ss = s;
@@ -39,6 +39,16 @@
#endif
#ifdef CONFIG_KERNEL_GZIP
+void *memcpy(void *dest, const void *src, size_t n)
+{
+ char *d = dest;
+ const char *s = src;
+ while (n--)
+ *d++ = *s++;
+
+ return dest;
+}
+
#define BOOT_HEAP_SIZE 0x10000
#include "../../../../lib/decompress_inflate.c"
#endif
diff --git a/arch/m32r/include/asm/ptrace.h b/arch/m32r/include/asm/ptrace.h
index 5275275..4313aa6 100644
--- a/arch/m32r/include/asm/ptrace.h
+++ b/arch/m32r/include/asm/ptrace.h
@@ -113,9 +113,6 @@
#define PTRACE_OLDSETOPTIONS 21
-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD 0x00000001
-
#ifdef __KERNEL__
#include <asm/m32r.h> /* M32R_PSW_BSM, M32R_PSW_BPM */
diff --git a/arch/m32r/include/asm/smp.h b/arch/m32r/include/asm/smp.h
index cf7829a..c689b82 100644
--- a/arch/m32r/include/asm/smp.h
+++ b/arch/m32r/include/asm/smp.h
@@ -79,11 +79,6 @@
return cpu;
}
-static __inline__ unsigned int num_booting_cpus(void)
-{
- return cpumask_weight(&cpu_callout_map);
-}
-
extern void smp_send_timer(void);
extern unsigned long send_IPI_mask_phys(const cpumask_t*, int, int);
diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
index 4c03361..51f5e9a 100644
--- a/arch/m32r/kernel/ptrace.c
+++ b/arch/m32r/kernel/ptrace.c
@@ -591,17 +591,16 @@
if (access_process_vm(child, pc&~3, &insn, sizeof(insn), 0)
!= sizeof(insn))
- return -EIO;
+ return;
compute_next_pc(insn, pc, &next_pc, child);
if (next_pc & 0x80000000)
- return -EIO;
+ return;
if (embed_debug_trap(child, next_pc))
- return -EIO;
+ return;
invalidate_cache();
- return 0;
}
void user_disable_single_step(struct task_struct *child)
diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c
index f3fb2c0..d0f60b9 100644
--- a/arch/m32r/kernel/signal.c
+++ b/arch/m32r/kernel/signal.c
@@ -286,7 +286,7 @@
case -ERESTARTNOINTR:
regs->r0 = regs->orig_r0;
if (prev_insn(regs) < 0)
- return -EFAULT;
+ return;
}
}
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index cac5b6b..1471201 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -7,6 +7,8 @@
select GENERIC_IRQ_SHOW
select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
select GENERIC_CPU_DEVICES
+ select GENERIC_STRNCPY_FROM_USER if MMU
+ select GENERIC_STRNLEN_USER if MMU
select FPU if MMU
select ARCH_USES_GETTIMEOFFSET if MMU && !COLDFIRE
diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild
index 1a922fa..eafa253 100644
--- a/arch/m68k/include/asm/Kbuild
+++ b/arch/m68k/include/asm/Kbuild
@@ -1,2 +1,4 @@
include include/asm-generic/Kbuild.asm
header-y += cachectl.h
+
+generic-y += word-at-a-time.h
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index d63b99f..497c31c 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -86,7 +86,7 @@
/*
* QSPI module.
*/
-#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340)
+#define MCFQSPI_BASE (MCF_IPSBAR + 0x340)
#define MCFQSPI_SIZE 0x40
#define MCFQSPI_CS0 147
diff --git a/arch/m68k/include/asm/uaccess_mm.h b/arch/m68k/include/asm/uaccess_mm.h
index 9c80cd5..472c891 100644
--- a/arch/m68k/include/asm/uaccess_mm.h
+++ b/arch/m68k/include/asm/uaccess_mm.h
@@ -379,12 +379,15 @@
#define copy_from_user(to, from, n) __copy_from_user(to, from, n)
#define copy_to_user(to, from, n) __copy_to_user(to, from, n)
-long strncpy_from_user(char *dst, const char __user *src, long count);
-long strnlen_user(const char __user *src, long n);
+#define user_addr_max() \
+ (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL)
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern __must_check long strlen_user(const char __user *str);
+extern __must_check long strnlen_user(const char __user *str, long n);
+
unsigned long __clear_user(void __user *to, unsigned long n);
#define clear_user __clear_user
-#define strlen_user(str) strnlen_user(str, 32767)
-
#endif /* _M68K_UACCESS_H */
diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c
index 8b4a222..1bc10e6 100644
--- a/arch/m68k/kernel/ptrace.c
+++ b/arch/m68k/kernel/ptrace.c
@@ -286,7 +286,7 @@
}
}
-#ifdef CONFIG_COLDFIRE
+#if defined(CONFIG_COLDFIRE) || !defined(CONFIG_MMU)
asmlinkage int syscall_trace_enter(void)
{
int ret = 0;
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index d7deb7f..707f057 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -85,7 +85,7 @@
mach_sched_init(timer_interrupt);
}
-#ifdef CONFIG_M68KCLASSIC
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
u32 arch_gettimeoffset(void)
{
@@ -108,4 +108,4 @@
module_init(rtc_init);
-#endif /* CONFIG_M68KCLASSIC */
+#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
diff --git a/arch/m68k/lib/uaccess.c b/arch/m68k/lib/uaccess.c
index 5664386..5e97f2e 100644
--- a/arch/m68k/lib/uaccess.c
+++ b/arch/m68k/lib/uaccess.c
@@ -104,80 +104,6 @@
EXPORT_SYMBOL(__generic_copy_to_user);
/*
- * Copy a null terminated string from userspace.
- */
-long strncpy_from_user(char *dst, const char __user *src, long count)
-{
- long res;
- char c;
-
- if (count <= 0)
- return count;
-
- asm volatile ("\n"
- "1: "MOVES".b (%2)+,%4\n"
- " move.b %4,(%1)+\n"
- " jeq 2f\n"
- " subq.l #1,%3\n"
- " jne 1b\n"
- "2: sub.l %3,%0\n"
- "3:\n"
- " .section .fixup,\"ax\"\n"
- " .even\n"
- "10: move.l %5,%0\n"
- " jra 3b\n"
- " .previous\n"
- "\n"
- " .section __ex_table,\"a\"\n"
- " .align 4\n"
- " .long 1b,10b\n"
- " .previous"
- : "=d" (res), "+a" (dst), "+a" (src), "+r" (count), "=&d" (c)
- : "i" (-EFAULT), "0" (count));
-
- return res;
-}
-EXPORT_SYMBOL(strncpy_from_user);
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-long strnlen_user(const char __user *src, long n)
-{
- char c;
- long res;
-
- asm volatile ("\n"
- "1: subq.l #1,%1\n"
- " jmi 3f\n"
- "2: "MOVES".b (%0)+,%2\n"
- " tst.b %2\n"
- " jne 1b\n"
- " jra 4f\n"
- "\n"
- "3: addq.l #1,%0\n"
- "4: sub.l %4,%0\n"
- "5:\n"
- " .section .fixup,\"ax\"\n"
- " .even\n"
- "20: sub.l %0,%0\n"
- " jra 5b\n"
- " .previous\n"
- "\n"
- " .section __ex_table,\"a\"\n"
- " .align 4\n"
- " .long 2b,20b\n"
- " .previous\n"
- : "=&a" (res), "+d" (n), "=&d" (c)
- : "0" (src), "r" (src));
-
- return res;
-}
-EXPORT_SYMBOL(strnlen_user);
-
-/*
* Zero Userspace
*/
diff --git a/arch/m68k/platform/68328/timers.c b/arch/m68k/platform/68328/timers.c
index c801c17..f4dc9b2 100644
--- a/arch/m68k/platform/68328/timers.c
+++ b/arch/m68k/platform/68328/timers.c
@@ -53,6 +53,7 @@
#endif
static u32 m68328_tick_cnt;
+static irq_handler_t timer_interrupt;
/***************************************************************************/
@@ -62,7 +63,7 @@
TSTAT &= 0;
m68328_tick_cnt += TICKS_PER_JIFFY;
- return arch_timer_interrupt(irq, dummy);
+ return timer_interrupt(irq, dummy);
}
/***************************************************************************/
@@ -99,7 +100,7 @@
/***************************************************************************/
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
{
/* disable timer 1 */
TCTL = 0;
@@ -115,6 +116,7 @@
/* Enable timer 1 */
TCTL |= TCTL_TEN;
clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
+ timer_interrupt = handler;
}
/***************************************************************************/
diff --git a/arch/m68k/platform/68360/config.c b/arch/m68k/platform/68360/config.c
index 255fc03..9877cef 100644
--- a/arch/m68k/platform/68360/config.c
+++ b/arch/m68k/platform/68360/config.c
@@ -35,6 +35,7 @@
#define OSCILLATOR (unsigned long int)33000000
#endif
+static irq_handler_t timer_interrupt;
unsigned long int system_clock;
extern QUICC *pquicc;
@@ -52,7 +53,7 @@
pquicc->timer_ter1 = 0x0002; /* clear timer event */
- return arch_timer_interrupt(irq, dummy);
+ return timer_interrupt(irq, dummy);
}
static struct irqaction m68360_timer_irq = {
@@ -61,7 +62,7 @@
.handler = hw_tick,
};
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
{
unsigned char prescaler;
unsigned short tgcr_save;
@@ -94,6 +95,8 @@
pquicc->timer_ter1 = 0x0003; /* clear timer events */
+ timer_interrupt = handler;
+
/* enable timer 1 interrupt in CIMR */
setup_irq(CPMVEC_TIMER1, &m68360_timer_irq);
diff --git a/arch/m68k/platform/coldfire/clk.c b/arch/m68k/platform/coldfire/clk.c
index 9f1260c..44da406 100644
--- a/arch/m68k/platform/coldfire/clk.c
+++ b/arch/m68k/platform/coldfire/clk.c
@@ -42,4 +42,11 @@
return MCF_CLK;
}
EXPORT_SYMBOL(clk_get_rate);
+
+struct clk *devm_clk_get(struct device *dev, const char *id)
+{
+ return NULL;
+}
+EXPORT_SYMBOL(devm_clk_get);
+
/***************************************************************************/
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 09ab87e..b3e10fd 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -288,6 +288,7 @@
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
select SYS_HAS_CPU_MIPS64_R1
+ select SYS_HAS_CPU_MIPS64_R2
select SYS_HAS_CPU_NEVADA
select SYS_HAS_CPU_RM7000
select SYS_HAS_EARLY_PRINTK
@@ -1423,6 +1424,7 @@
config CPU_CAVIUM_OCTEON
bool "Cavium Octeon processor"
depends on SYS_HAS_CPU_CAVIUM_OCTEON
+ select ARCH_SPARSEMEM_ENABLE
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_SMP
diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig
index 6210b8d..b311be4 100644
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -21,6 +21,7 @@
select BCMA
select BCMA_HOST_SOC
select BCMA_DRIVER_MIPS
+ select BCMA_HOST_PCI if PCI
select BCMA_DRIVER_PCI_HOSTMODE if PCI
default y
help
diff --git a/arch/mips/bcm63xx/dev-pcmcia.c b/arch/mips/bcm63xx/dev-pcmcia.c
index de4d917..a551bab 100644
--- a/arch/mips/bcm63xx/dev-pcmcia.c
+++ b/arch/mips/bcm63xx/dev-pcmcia.c
@@ -79,11 +79,11 @@
return ret;
}
-static const __initdata struct {
+static const struct {
unsigned int cs;
unsigned int base;
unsigned int size;
-} pcmcia_cs[3] = {
+} pcmcia_cs[3] __initconst = {
{
.cs = MPI_CS_PCMCIA_COMMON,
.base = BCM_PCMCIA_COMMON_BASE_PA,
diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig
index f9e275a..2f4f6d5 100644
--- a/arch/mips/cavium-octeon/Kconfig
+++ b/arch/mips/cavium-octeon/Kconfig
@@ -82,10 +82,6 @@
help
Lock the kernel's implementation of memcpy() into L2.
-config ARCH_SPARSEMEM_ENABLE
- def_bool y
- select SPARSEMEM_STATIC
-
config IOMMU_HELPER
bool
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index 4b93048..ee1fb9f 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -185,7 +185,6 @@
octeon_init_cvmcount();
octeon_irq_setup_secondary();
- raw_local_irq_enable();
}
/**
@@ -233,6 +232,7 @@
/* to generate the first CPU timer interrupt */
write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
+ local_irq_enable();
}
/**
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index 2e1ad4c..82ad35c 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -17,7 +17,6 @@
#include <linux/irqflags.h>
#include <linux/types.h>
#include <asm/barrier.h>
-#include <asm/bug.h>
#include <asm/byteorder.h> /* sigh ... */
#include <asm/cpu-features.h>
#include <asm/sgidefs.h>
diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h
index 285a41f..eee10dc 100644
--- a/arch/mips/include/asm/cmpxchg.h
+++ b/arch/mips/include/asm/cmpxchg.h
@@ -8,6 +8,7 @@
#ifndef __ASM_CMPXCHG_H
#define __ASM_CMPXCHG_H
+#include <linux/bug.h>
#include <linux/irqflags.h>
#include <asm/war.h>
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index f9fa2a4..95e40c1 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -94,6 +94,7 @@
#define PRID_IMP_24KE 0x9600
#define PRID_IMP_74K 0x9700
#define PRID_IMP_1004K 0x9900
+#define PRID_IMP_M14KC 0x9c00
/*
* These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
@@ -260,12 +261,12 @@
*/
CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
- CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC,
+ CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_M14KC,
/*
* MIPS64 class processors
*/
- CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
+ CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2,
CPU_XLR, CPU_XLP,
@@ -288,7 +289,7 @@
#define MIPS_CPU_ISA_M64R2 0x00000100
#define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_I | MIPS_CPU_ISA_II | \
- MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 )
+ MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2)
#define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \
MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)
diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index 86548da..991b659 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -206,7 +206,7 @@
#define GIC_VPE_EIC_SHADOW_SET_BASE 0x0100
#define GIC_VPE_EIC_SS(intr) \
- (GIC_EIC_SHADOW_SET_BASE + (4 * intr))
+ (GIC_VPE_EIC_SHADOW_SET_BASE + (4 * intr))
#define GIC_VPE_EIC_VEC_BASE 0x0800
#define GIC_VPE_EIC_VEC(intr) \
@@ -330,6 +330,17 @@
#define GIC_FLAG_TRANSPARENT 0x02
};
+/*
+ * This is only used in EIC mode. This helps to figure out which
+ * shared interrupts we need to process when we get a vector interrupt.
+ */
+#define GIC_MAX_SHARED_INTR 0x5
+struct gic_shared_intr_map {
+ unsigned int num_shared_intr;
+ unsigned int intr_list[GIC_MAX_SHARED_INTR];
+ unsigned int local_intr_mask;
+};
+
extern void gic_init(unsigned long gic_base_addr,
unsigned long gic_addrspace_size, struct gic_intr_map *intrmap,
unsigned int intrmap_size, unsigned int irqbase);
@@ -338,5 +349,7 @@
extern void gic_send_ipi(unsigned int intr);
extern unsigned int plat_ipi_call_int_xlate(unsigned int);
extern unsigned int plat_ipi_resched_int_xlate(unsigned int);
+extern void gic_bind_eic_interrupt(int irq, int set);
+extern unsigned int gic_get_timer_pending(void);
#endif /* _ASM_GICREGS_H */
diff --git a/arch/mips/include/asm/inst.h b/arch/mips/include/asm/inst.h
index 7ebfc39..ab84064 100644
--- a/arch/mips/include/asm/inst.h
+++ b/arch/mips/include/asm/inst.h
@@ -251,7 +251,7 @@
unsigned int func : 6;
};
-struct ma_format { /* FPU multipy and add format (MIPS IV) */
+struct ma_format { /* FPU multiply and add format (MIPS IV) */
unsigned int opcode : 6;
unsigned int fr : 5;
unsigned int ft : 5;
@@ -324,7 +324,7 @@
unsigned int opcode : 6;
};
-struct ma_format { /* FPU multipy and add format (MIPS IV) */
+struct ma_format { /* FPU multiply and add format (MIPS IV) */
unsigned int fmt : 2;
unsigned int func : 4;
unsigned int fd : 5;
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index a58f229..29d9c23 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -17,6 +17,7 @@
#include <linux/types.h>
#include <asm/addrspace.h>
+#include <asm/bug.h>
#include <asm/byteorder.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
index fb698dc..78dbb8a 100644
--- a/arch/mips/include/asm/irq.h
+++ b/arch/mips/include/asm/irq.h
@@ -136,6 +136,7 @@
* IE7. Since R2 their number has to be read from the c0_intctl register.
*/
#define CP0_LEGACY_COMPARE_IRQ 7
+#define CP0_LEGACY_PERFCNT_IRQ 7
extern int cp0_compare_irq;
extern int cp0_compare_irq_shift;
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
index 94d4faa..fdcd78c 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -99,7 +99,7 @@
#define CKCTL_6368_USBH_CLK_EN (1 << 15)
#define CKCTL_6368_DISABLE_GLESS_EN (1 << 16)
#define CKCTL_6368_NAND_CLK_EN (1 << 17)
-#define CKCTL_6368_IPSEC_CLK_EN (1 << 17)
+#define CKCTL_6368_IPSEC_CLK_EN (1 << 18)
#define CKCTL_6368_ALL_SAFE_EN (CKCTL_6368_SWPKT_USB_EN | \
CKCTL_6368_SWPKT_SAR_EN | \
diff --git a/arch/mips/include/asm/mips-boards/maltaint.h b/arch/mips/include/asm/mips-boards/maltaint.h
index d11aa02..5447d9f 100644
--- a/arch/mips/include/asm/mips-boards/maltaint.h
+++ b/arch/mips/include/asm/mips-boards/maltaint.h
@@ -86,6 +86,16 @@
#define GIC_CPU_INT4 4 /* . */
#define GIC_CPU_INT5 5 /* Core Interrupt 5 */
+/* MALTA GIC local interrupts */
+#define GIC_INT_TMR (GIC_CPU_INT5)
+#define GIC_INT_PERFCTR (GIC_CPU_INT5)
+
+/* GIC constants */
+/* Add 2 to convert non-eic hw int # to eic vector # */
+#define GIC_CPU_TO_VEC_OFFSET (2)
+/* If we map an intr to pin X, GIC will actually generate vector X+1 */
+#define GIC_PIN_TO_VEC_OFFSET (1)
+
#define GIC_EXT_INTR(x) x
/* External Interrupts used for IPI */
diff --git a/arch/mips/include/asm/mipsmtregs.h b/arch/mips/include/asm/mipsmtregs.h
index c9420aa..e71ff4c 100644
--- a/arch/mips/include/asm/mipsmtregs.h
+++ b/arch/mips/include/asm/mipsmtregs.h
@@ -48,7 +48,7 @@
#define CP0_VPECONF0 $1, 2
#define CP0_VPECONF1 $1, 3
#define CP0_YQMASK $1, 4
-#define CP0_VPESCHEDULE $1, 5
+#define CP0_VPESCHEDULE $1, 5
#define CP0_VPESCHEFBK $1, 6
#define CP0_TCSTATUS $2, 1
#define CP0_TCBIND $2, 2
diff --git a/arch/mips/include/asm/switch_to.h b/arch/mips/include/asm/switch_to.h
index 5d33621..4f8ddba8 100644
--- a/arch/mips/include/asm/switch_to.h
+++ b/arch/mips/include/asm/switch_to.h
@@ -22,7 +22,7 @@
* switch_to(n) should switch tasks to task nr n, first
* checking that n isn't the current task, in which case it does nothing.
*/
-extern asmlinkage void *resume(void *last, void *next, void *next_ti);
+extern asmlinkage void *resume(void *last, void *next, void *next_ti, u32 __usedfpu);
extern unsigned int ll_bit;
extern struct task_struct *ll_task;
@@ -66,11 +66,13 @@
#define switch_to(prev, next, last) \
do { \
+ u32 __usedfpu; \
__mips_mt_fpaff_switch_to(prev); \
if (cpu_has_dsp) \
__save_dsp(prev); \
__clear_software_ll_bit(); \
- (last) = resume(prev, next, task_thread_info(next)); \
+ __usedfpu = test_and_clear_tsk_thread_flag(prev, TIF_USEDFPU); \
+ (last) = resume(prev, next, task_thread_info(next), __usedfpu); \
} while (0)
#define finish_arch_switch(prev) \
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index e2eca7d..ca97e0e 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -60,6 +60,8 @@
register struct thread_info *__current_thread_info __asm__("$28");
#define current_thread_info() __current_thread_info
+#endif /* !__ASSEMBLY__ */
+
/* thread information allocation */
#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_32BIT)
#define THREAD_SIZE_ORDER (1)
@@ -85,8 +87,6 @@
#define STACK_WARN (THREAD_SIZE / 8)
-#endif /* !__ASSEMBLY__ */
-
#define PREEMPT_ACTIVE 0x10000000
/*
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 6ae7ce4..f4630e1 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -4,7 +4,7 @@
* Copyright (C) xxxx the Anonymous
* Copyright (C) 1994 - 2006 Ralf Baechle
* Copyright (C) 2003, 2004 Maciej W. Rozycki
- * Copyright (C) 2001, 2004 MIPS Inc.
+ * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -199,6 +199,7 @@
cpu_wait = rm7k_wait_irqoff;
break;
+ case CPU_M14KC:
case CPU_24K:
case CPU_34K:
case CPU_1004K:
@@ -810,6 +811,10 @@
c->cputype = CPU_5KC;
__cpu_name[cpu] = "MIPS 5Kc";
break;
+ case PRID_IMP_5KE:
+ c->cputype = CPU_5KE;
+ __cpu_name[cpu] = "MIPS 5KE";
+ break;
case PRID_IMP_20KC:
c->cputype = CPU_20KC;
__cpu_name[cpu] = "MIPS 20Kc";
@@ -831,6 +836,10 @@
c->cputype = CPU_74K;
__cpu_name[cpu] = "MIPS 74Kc";
break;
+ case PRID_IMP_M14KC:
+ c->cputype = CPU_M14KC;
+ __cpu_name[cpu] = "MIPS M14Kc";
+ break;
case PRID_IMP_1004K:
c->cputype = CPU_1004K;
__cpu_name[cpu] = "MIPS 1004Kc";
diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c
index 57ba13e..3fc1691 100644
--- a/arch/mips/kernel/mips_ksyms.c
+++ b/arch/mips/kernel/mips_ksyms.c
@@ -5,7 +5,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1996, 97, 98, 99, 2000, 01, 03, 04, 05 by Ralf Baechle
+ * Copyright (C) 1996, 97, 98, 99, 2000, 01, 03, 04, 05, 12 by Ralf Baechle
* Copyright (C) 1999, 2000, 01 Silicon Graphics, Inc.
*/
#include <linux/interrupt.h>
@@ -35,6 +35,12 @@
EXPORT_SYMBOL(kernel_thread);
/*
+ * Functions that operate on entire pages. Mostly used by memory management.
+ */
+EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
+
+/*
* Userspace access stuff.
*/
EXPORT_SYMBOL(__copy_user);
diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S
index ce89c80..0441f54 100644
--- a/arch/mips/kernel/octeon_switch.S
+++ b/arch/mips/kernel/octeon_switch.S
@@ -31,7 +31,7 @@
/*
* task_struct *resume(task_struct *prev, task_struct *next,
- * struct thread_info *next_ti)
+ * struct thread_info *next_ti, int usedfpu)
*/
.align 7
LEAF(resume)
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index f29099b..eb5e394 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -162,11 +162,6 @@
return counters >> vpe_shift();
}
-static unsigned int counters_per_cpu_to_total(unsigned int counters)
-{
- return counters << vpe_shift();
-}
-
#else /* !CONFIG_MIPS_MT_SMP */
#define vpe_id() 0
diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S
index 2938983..9c51be5 100644
--- a/arch/mips/kernel/r2300_switch.S
+++ b/arch/mips/kernel/r2300_switch.S
@@ -43,7 +43,7 @@
/*
* task_struct *resume(task_struct *prev, task_struct *next,
- * struct thread_info *next_ti) )
+ * struct thread_info *next_ti, int usedfpu)
*/
LEAF(resume)
mfc0 t1, CP0_STATUS
@@ -51,18 +51,9 @@
cpu_save_nonscratch a0
sw ra, THREAD_REG31(a0)
- /*
- * check if we need to save FPU registers
- */
- lw t3, TASK_THREAD_INFO(a0)
- lw t0, TI_FLAGS(t3)
- li t1, _TIF_USEDFPU
- and t2, t0, t1
- beqz t2, 1f
- nor t1, zero, t1
+ beqz a3, 1f
- and t0, t0, t1
- sw t0, TI_FLAGS(t3)
+ PTR_L t3, TASK_THREAD_INFO(a0)
/*
* clear saved user stack CU1 bit
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S
index 9414f93..42d2a39 100644
--- a/arch/mips/kernel/r4k_switch.S
+++ b/arch/mips/kernel/r4k_switch.S
@@ -41,7 +41,7 @@
/*
* task_struct *resume(task_struct *prev, task_struct *next,
- * struct thread_info *next_ti)
+ * struct thread_info *next_ti, int usedfpu)
*/
.align 5
LEAF(resume)
@@ -53,16 +53,10 @@
/*
* check if we need to save FPU registers
*/
+
+ beqz a3, 1f
+
PTR_L t3, TASK_THREAD_INFO(a0)
- LONG_L t0, TI_FLAGS(t3)
- li t1, _TIF_USEDFPU
- and t2, t0, t1
- beqz t2, 1f
- nor t1, zero, t1
-
- and t0, t0, t1
- LONG_S t0, TI_FLAGS(t3)
-
/*
* clear saved user stack CU1 bit
*/
diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c
index 3046e29..8e393b8 100644
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -15,7 +15,6 @@
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
-#include <linux/init.h>
#include <linux/cpu.h>
#include <linux/cpumask.h>
#include <linux/reboot.h>
@@ -197,13 +196,6 @@
write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
#endif
-
- /* make sure there won't be a timer interrupt for a little while */
- write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
-
- irq_enable_hazard();
- set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE);
- irq_enable_hazard();
}
/*
@@ -212,6 +204,13 @@
static void bmips_smp_finish(void)
{
pr_info("SMP: CPU%d is running\n", smp_processor_id());
+
+ /* make sure there won't be a timer interrupt for a little while */
+ write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
+
+ irq_enable_hazard();
+ set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE);
+ irq_enable_hazard();
}
/*
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 48650c8..1268392 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -122,13 +122,21 @@
notify_cpu_starting(cpu);
- mp_ops->smp_finish();
+ set_cpu_online(cpu, true);
+
set_cpu_sibling_map(cpu);
cpu_set(cpu, cpu_callin_map);
synchronise_count_slave();
+ /*
+ * irq will be enabled in ->smp_finish(), enabling it too early
+ * is dangerous.
+ */
+ WARN_ON_ONCE(!irqs_disabled());
+ mp_ops->smp_finish();
+
cpu_idle();
}
@@ -196,8 +204,6 @@
while (!cpu_isset(cpu, cpu_callin_map))
udelay(100);
- set_cpu_online(cpu, true);
-
return 0;
}
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index f5dd38f..15b5f3c 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -322,7 +322,7 @@
/*
* Common setup before any secondaries are started
- * Make sure all CPU's are in a sensible state before we boot any of the
+ * Make sure all CPUs are in a sensible state before we boot any of the
* secondaries.
*
* For MIPS MT "SMTC" operation, we set up all TCs, spread as evenly
@@ -340,12 +340,12 @@
/*
* TCContext gets an offset from the base of the IPIQ array
* to be used in low-level code to detect the presence of
- * an active IPI queue
+ * an active IPI queue.
*/
write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16);
/* Bind tc to vpe */
write_tc_c0_tcbind(vpe);
- /* In general, all TCs should have the same cpu_data indications */
+ /* In general, all TCs should have the same cpu_data indications. */
memcpy(&cpu_data[cpu], &cpu_data[0], sizeof(struct cpuinfo_mips));
/* For 34Kf, start with TC/CPU 0 as sole owner of single FPU context */
if (cpu_data[0].cputype == CPU_34K ||
@@ -358,8 +358,8 @@
}
/*
- * Tweak to get Count registes in as close a sync as possible.
- * Value seems good for 34K-class cores.
+ * Tweak to get Count registes in as close a sync as possible. The
+ * value seems good for 34K-class cores.
*/
#define CP0_SKEW 8
@@ -615,7 +615,6 @@
void smtc_init_secondary(void)
{
- local_irq_enable();
}
void smtc_smp_finish(void)
@@ -631,6 +630,8 @@
if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id))
write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
+ local_irq_enable();
+
printk("TC %d going on-line as CPU %d\n",
cpu_data[smp_processor_id()].tc_id, smp_processor_id());
}
diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c
index 99f913c..842d55e 100644
--- a/arch/mips/kernel/sync-r4k.c
+++ b/arch/mips/kernel/sync-r4k.c
@@ -111,7 +111,6 @@
void __cpuinit synchronise_count_slave(void)
{
int i;
- unsigned long flags;
unsigned int initcount;
int ncpus;
@@ -123,8 +122,6 @@
return;
#endif
- local_irq_save(flags);
-
/*
* Not every cpu is online at the time this gets called,
* so we first wait for the master to say everyone is ready
@@ -154,7 +151,5 @@
}
/* Arrange for an interrupt in a short while */
write_c0_compare(read_c0_count() + COUNTON);
-
- local_irq_restore(flags);
}
#undef NR_LOOPS
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 2d0c2a2..c3c2935 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -132,6 +132,9 @@
unsigned long ra = regs->regs[31];
unsigned long pc = regs->cp0_epc;
+ if (!task)
+ task = current;
+
if (raw_show_trace || !__kernel_text_address(pc)) {
show_raw_backtrace(sp);
return;
@@ -1249,6 +1252,7 @@
break;
case CPU_5KC:
+ case CPU_5KE:
write_c0_ecc(0x80000000);
back_to_back_c0_hazard();
/* Set the PE bit (bit 31) in the c0_errctl register. */
@@ -1498,6 +1502,7 @@
* Timer interrupt
*/
int cp0_compare_irq;
+EXPORT_SYMBOL_GPL(cp0_compare_irq);
int cp0_compare_irq_shift;
/*
@@ -1597,7 +1602,7 @@
cp0_perfcount_irq = -1;
} else {
cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
- cp0_compare_irq_shift = cp0_compare_irq;
+ cp0_compare_irq_shift = CP0_LEGACY_PERFCNT_IRQ;
cp0_perfcount_irq = -1;
}
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 924da5e..df243a6 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -1,5 +1,6 @@
#include <asm/asm-offsets.h>
#include <asm/page.h>
+#include <asm/thread_info.h>
#include <asm-generic/vmlinux.lds.h>
#undef mips
@@ -72,7 +73,7 @@
.data : { /* Data */
. = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */
- INIT_TASK_DATA(PAGE_SIZE)
+ INIT_TASK_DATA(THREAD_SIZE)
NOSAVE_DATA
CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 4aa2028..fd6203f 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -3,8 +3,8 @@
#
obj-y += cache.o dma-default.o extable.o fault.o \
- gup.o init.o mmap.o page.o tlbex.o \
- tlbex-fault.o uasm.o
+ gup.o init.o mmap.o page.o page-funcs.o \
+ tlbex.o tlbex-fault.o uasm.o
obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o
obj-$(CONFIG_64BIT) += pgtable-64.o
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 5109be9..f092c26 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -977,7 +977,7 @@
c->icache.linesz = 2 << lsize;
else
c->icache.linesz = lsize;
- c->icache.sets = 64 << ((config1 >> 22) & 7);
+ c->icache.sets = 32 << (((config1 >> 22) + 1) & 7);
c->icache.ways = 1 + ((config1 >> 16) & 7);
icache_size = c->icache.sets *
@@ -997,7 +997,7 @@
c->dcache.linesz = 2 << lsize;
else
c->dcache.linesz= lsize;
- c->dcache.sets = 64 << ((config1 >> 13) & 7);
+ c->dcache.sets = 32 << (((config1 >> 13) + 1) & 7);
c->dcache.ways = 1 + ((config1 >> 7) & 7);
dcache_size = c->dcache.sets *
@@ -1051,6 +1051,7 @@
case CPU_R14000:
break;
+ case CPU_M14KC:
case CPU_24K:
case CPU_34K:
case CPU_74K:
diff --git a/arch/mips/mm/page-funcs.S b/arch/mips/mm/page-funcs.S
new file mode 100644
index 0000000..48a6b38
--- /dev/null
+++ b/arch/mips/mm/page-funcs.S
@@ -0,0 +1,50 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Micro-assembler generated clear_page/copy_page functions.
+ *
+ * Copyright (C) 2012 MIPS Technologies, Inc.
+ * Copyright (C) 2012 Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
+#define cpu_clear_page_function_name clear_page_cpu
+#define cpu_copy_page_function_name copy_page_cpu
+#else
+#define cpu_clear_page_function_name clear_page
+#define cpu_copy_page_function_name copy_page
+#endif
+
+/*
+ * Maximum sizes:
+ *
+ * R4000 128 bytes S-cache: 0x058 bytes
+ * R4600 v1.7: 0x05c bytes
+ * R4600 v2.0: 0x060 bytes
+ * With prefetching, 16 word strides 0x120 bytes
+ */
+EXPORT(__clear_page_start)
+LEAF(cpu_clear_page_function_name)
+1: j 1b /* Dummy, will be replaced. */
+ .space 288
+END(cpu_clear_page_function_name)
+EXPORT(__clear_page_end)
+
+/*
+ * Maximum sizes:
+ *
+ * R4000 128 bytes S-cache: 0x11c bytes
+ * R4600 v1.7: 0x080 bytes
+ * R4600 v2.0: 0x07c bytes
+ * With prefetching, 16 word strides 0x540 bytes
+ */
+EXPORT(__copy_page_start)
+LEAF(cpu_copy_page_function_name)
+1: j 1b /* Dummy, will be replaced. */
+ .space 1344
+END(cpu_copy_page_function_name)
+EXPORT(__copy_page_end)
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index cc0b6268..98f530e 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -6,6 +6,7 @@
* Copyright (C) 2003, 04, 05 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2007 Maciej W. Rozycki
* Copyright (C) 2008 Thiemo Seufer
+ * Copyright (C) 2012 MIPS Technologies, Inc.
*/
#include <linux/init.h>
#include <linux/kernel.h>
@@ -71,45 +72,6 @@
#define cpu_is_r4600_v1_x() ((read_c0_prid() & 0xfffffff0) == 0x00002010)
#define cpu_is_r4600_v2_x() ((read_c0_prid() & 0xfffffff0) == 0x00002020)
-/*
- * Maximum sizes:
- *
- * R4000 128 bytes S-cache: 0x058 bytes
- * R4600 v1.7: 0x05c bytes
- * R4600 v2.0: 0x060 bytes
- * With prefetching, 16 word strides 0x120 bytes
- */
-
-static u32 clear_page_array[0x120 / 4];
-
-#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
-void clear_page_cpu(void *page) __attribute__((alias("clear_page_array")));
-#else
-void clear_page(void *page) __attribute__((alias("clear_page_array")));
-#endif
-
-EXPORT_SYMBOL(clear_page);
-
-/*
- * Maximum sizes:
- *
- * R4000 128 bytes S-cache: 0x11c bytes
- * R4600 v1.7: 0x080 bytes
- * R4600 v2.0: 0x07c bytes
- * With prefetching, 16 word strides 0x540 bytes
- */
-static u32 copy_page_array[0x540 / 4];
-
-#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
-void
-copy_page_cpu(void *to, void *from) __attribute__((alias("copy_page_array")));
-#else
-void copy_page(void *to, void *from) __attribute__((alias("copy_page_array")));
-#endif
-
-EXPORT_SYMBOL(copy_page);
-
-
static int pref_bias_clear_store __cpuinitdata;
static int pref_bias_copy_load __cpuinitdata;
static int pref_bias_copy_store __cpuinitdata;
@@ -282,10 +244,15 @@
}
}
+extern u32 __clear_page_start;
+extern u32 __clear_page_end;
+extern u32 __copy_page_start;
+extern u32 __copy_page_end;
+
void __cpuinit build_clear_page(void)
{
int off;
- u32 *buf = (u32 *)&clear_page_array;
+ u32 *buf = &__clear_page_start;
struct uasm_label *l = labels;
struct uasm_reloc *r = relocs;
int i;
@@ -356,17 +323,17 @@
uasm_i_jr(&buf, RA);
uasm_i_nop(&buf);
- BUG_ON(buf > clear_page_array + ARRAY_SIZE(clear_page_array));
+ BUG_ON(buf > &__clear_page_end);
uasm_resolve_relocs(relocs, labels);
pr_debug("Synthesized clear page handler (%u instructions).\n",
- (u32)(buf - clear_page_array));
+ (u32)(buf - &__clear_page_start));
pr_debug("\t.set push\n");
pr_debug("\t.set noreorder\n");
- for (i = 0; i < (buf - clear_page_array); i++)
- pr_debug("\t.word 0x%08x\n", clear_page_array[i]);
+ for (i = 0; i < (buf - &__clear_page_start); i++)
+ pr_debug("\t.word 0x%08x\n", (&__clear_page_start)[i]);
pr_debug("\t.set pop\n");
}
@@ -427,7 +394,7 @@
void __cpuinit build_copy_page(void)
{
int off;
- u32 *buf = (u32 *)©_page_array;
+ u32 *buf = &__copy_page_start;
struct uasm_label *l = labels;
struct uasm_reloc *r = relocs;
int i;
@@ -595,21 +562,23 @@
uasm_i_jr(&buf, RA);
uasm_i_nop(&buf);
- BUG_ON(buf > copy_page_array + ARRAY_SIZE(copy_page_array));
+ BUG_ON(buf > &__copy_page_end);
uasm_resolve_relocs(relocs, labels);
pr_debug("Synthesized copy page handler (%u instructions).\n",
- (u32)(buf - copy_page_array));
+ (u32)(buf - &__copy_page_start));
pr_debug("\t.set push\n");
pr_debug("\t.set noreorder\n");
- for (i = 0; i < (buf - copy_page_array); i++)
- pr_debug("\t.word 0x%08x\n", copy_page_array[i]);
+ for (i = 0; i < (buf - &__copy_page_start); i++)
+ pr_debug("\t.word 0x%08x\n", (&__copy_page_start)[i]);
pr_debug("\t.set pop\n");
}
#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
+extern void clear_page_cpu(void *page);
+extern void copy_page_cpu(void *to, void *from);
/*
* Pad descriptors to cacheline, since each is exclusively owned by a
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 0bc485b..03eb0ef 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -9,6 +9,7 @@
* Copyright (C) 2005, 2007, 2008, 2009 Maciej W. Rozycki
* Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2008, 2009 Cavium Networks, Inc.
+ * Copyright (C) 2011 MIPS Technologies, Inc.
*
* ... and the days got worse and worse and now you see
* I've gone completly out of my mind.
@@ -494,6 +495,7 @@
case CPU_R14000:
case CPU_4KC:
case CPU_4KEC:
+ case CPU_M14KC:
case CPU_SB1:
case CPU_SB1A:
case CPU_4KSC:
diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c
index bf80921..284dea5 100644
--- a/arch/mips/mti-malta/malta-pci.c
+++ b/arch/mips/mti-malta/malta-pci.c
@@ -241,8 +241,9 @@
return;
}
- if (controller->io_resource->start < 0x00001000UL) /* FIXME */
- controller->io_resource->start = 0x00001000UL;
+ /* Change start address to avoid conflicts with ACPI and SMB devices */
+ if (controller->io_resource->start < 0x00002000UL)
+ controller->io_resource->start = 0x00002000UL;
iomem_resource.end &= 0xfffffffffULL; /* 64 GB */
ioport_resource.end = controller->io_resource->end;
@@ -253,7 +254,7 @@
}
/* Enable PCI 2.1 compatibility in PIIX4 */
-static void __init quirk_dlcsetup(struct pci_dev *dev)
+static void __devinit quirk_dlcsetup(struct pci_dev *dev)
{
u8 odlc, ndlc;
(void) pci_read_config_byte(dev, 0x82, &odlc);
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index b7f37d4..2e28f65 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -111,7 +111,7 @@
unsigned int __iomem *jmpr_p =
(unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int));
int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07;
- static const int pciclocks[] __initdata = {
+ static const int pciclocks[] __initconst = {
33, 20, 25, 30, 12, 16, 37, 10
};
int pciclock = pciclocks[jmpr];
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index acb677a..b3df7c2 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -82,8 +82,10 @@
void xlp_mmu_init(void)
{
+ /* enable extended TLB and Large Fixed TLB */
write_c0_config6(read_c0_config6() | 0x24);
- current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
+ /* set page mask of Fixed TLB in config7 */
write_c0_config7(PM_DEFAULT_MASK >>
(13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
}
@@ -100,6 +102,10 @@
nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1));
#ifdef CONFIG_SMP
nlm_wakeup_secondary_cpus(0xffffffff);
+
+ /* update TLB size after waking up threads */
+ current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
register_smp_ops(&nlm_smp_ops);
#endif
}
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index d1f2d4c..b6e3782 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -78,6 +78,7 @@
switch (current_cpu_type()) {
case CPU_5KC:
+ case CPU_M14KC:
case CPU_20KC:
case CPU_24K:
case CPU_25KF:
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index baba3bc..4d80a85 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -322,6 +322,10 @@
op_model_mipsxx_ops.num_counters = counters;
switch (current_cpu_type()) {
+ case CPU_M14KC:
+ op_model_mipsxx_ops.cpu_type = "mips/M14Kc";
+ break;
+
case CPU_20KC:
op_model_mipsxx_ops.cpu_type = "mips/20K";
break;
diff --git a/arch/mips/pci/fixup-fuloong2e.c b/arch/mips/pci/fixup-fuloong2e.c
index d5d4c01..0857ab8 100644
--- a/arch/mips/pci/fixup-fuloong2e.c
+++ b/arch/mips/pci/fixup-fuloong2e.c
@@ -48,7 +48,7 @@
return 0;
}
-static void __init loongson2e_nec_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_nec_fixup(struct pci_dev *pdev)
{
unsigned int val;
@@ -60,7 +60,7 @@
pci_write_config_dword(pdev, 0xe4, 1 << 5);
}
-static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func0_fixup(struct pci_dev *pdev)
{
unsigned char c;
@@ -135,7 +135,7 @@
printk(KERN_INFO"via686b fix: ISA bridge done\n");
}
-static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func1_fixup(struct pci_dev *pdev)
{
printk(KERN_INFO"via686b fix: IDE\n");
@@ -168,19 +168,19 @@
printk(KERN_INFO"via686b fix: IDE done\n");
}
-static void __init loongson2e_686b_func2_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func2_fixup(struct pci_dev *pdev)
{
/* irq routing */
pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10);
}
-static void __init loongson2e_686b_func3_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func3_fixup(struct pci_dev *pdev)
{
/* irq routing */
pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11);
}
-static void __init loongson2e_686b_func5_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func5_fixup(struct pci_dev *pdev)
{
unsigned int val;
unsigned char c;
diff --git a/arch/mips/pci/fixup-lemote2f.c b/arch/mips/pci/fixup-lemote2f.c
index 4b9768d..a7b917dcf 100644
--- a/arch/mips/pci/fixup-lemote2f.c
+++ b/arch/mips/pci/fixup-lemote2f.c
@@ -96,21 +96,21 @@
}
/* CS5536 SPEC. fixup */
-static void __init loongson_cs5536_isa_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_isa_fixup(struct pci_dev *pdev)
{
/* the uart1 and uart2 interrupt in PIC is enabled as default */
pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1);
pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1);
}
-static void __init loongson_cs5536_ide_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_ide_fixup(struct pci_dev *pdev)
{
/* setting the mutex pin as IDE function */
pci_write_config_dword(pdev, PCI_IDE_CFG_REG,
CS5536_IDE_FLASH_SIGNATURE);
}
-static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_acc_fixup(struct pci_dev *pdev)
{
/* enable the AUDIO interrupt in PIC */
pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1);
@@ -118,14 +118,14 @@
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0);
}
-static void __init loongson_cs5536_ohci_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_ohci_fixup(struct pci_dev *pdev)
{
/* enable the OHCI interrupt in PIC */
/* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */
pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1);
}
-static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
{
u32 hi, lo;
@@ -137,7 +137,7 @@
pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000);
}
-static void __init loongson_nec_fixup(struct pci_dev *pdev)
+static void __devinit loongson_nec_fixup(struct pci_dev *pdev)
{
unsigned int val;
diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c
index 0f48498..70073c9 100644
--- a/arch/mips/pci/fixup-malta.c
+++ b/arch/mips/pci/fixup-malta.c
@@ -49,10 +49,10 @@
return 0;
}
-static void __init malta_piix_func0_fixup(struct pci_dev *pdev)
+static void __devinit malta_piix_func0_fixup(struct pci_dev *pdev)
{
unsigned char reg_val;
- static int piixirqmap[16] __initdata = { /* PIIX PIRQC[A:D] irq mappings */
+ static int piixirqmap[16] __devinitdata = { /* PIIX PIRQC[A:D] irq mappings */
0, 0, 0, 3,
4, 5, 6, 7,
0, 9, 10, 11,
@@ -83,7 +83,7 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
malta_piix_func0_fixup);
-static void __init malta_piix_func1_fixup(struct pci_dev *pdev)
+static void __devinit malta_piix_func1_fixup(struct pci_dev *pdev)
{
unsigned char reg_val;
diff --git a/arch/mips/pci/fixup-mpc30x.c b/arch/mips/pci/fixup-mpc30x.c
index e08f49c..8e4f828 100644
--- a/arch/mips/pci/fixup-mpc30x.c
+++ b/arch/mips/pci/fixup-mpc30x.c
@@ -22,13 +22,13 @@
#include <asm/vr41xx/mpc30x.h>
-static const int internal_func_irqs[] __initdata = {
+static const int internal_func_irqs[] __initconst = {
VRC4173_CASCADE_IRQ,
VRC4173_AC97_IRQ,
VRC4173_USB_IRQ,
};
-static const int irq_tab_mpc30x[] __initdata = {
+static const int irq_tab_mpc30x[] __initconst = {
[12] = VRC4173_PCMCIA1_IRQ,
[13] = VRC4173_PCMCIA2_IRQ,
[29] = MQ200_IRQ,
diff --git a/arch/mips/pci/fixup-sb1250.c b/arch/mips/pci/fixup-sb1250.c
index f0bb914..d02900a 100644
--- a/arch/mips/pci/fixup-sb1250.c
+++ b/arch/mips/pci/fixup-sb1250.c
@@ -15,7 +15,7 @@
* Set the BCM1250, etc. PCI host bridge's TRDY timeout
* to the finite max.
*/
-static void __init quirk_sb1250_pci(struct pci_dev *dev)
+static void __devinit quirk_sb1250_pci(struct pci_dev *dev)
{
pci_write_config_byte(dev, 0x40, 0xff);
}
@@ -25,7 +25,7 @@
/*
* The BCM1250, etc. PCI/HT bridge reports as a host bridge.
*/
-static void __init quirk_sb1250_ht(struct pci_dev *dev)
+static void __devinit quirk_sb1250_ht(struct pci_dev *dev)
{
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
}
@@ -35,7 +35,7 @@
/*
* Set the SP1011 HT/PCI bridge's TRDY timeout to the finite max.
*/
-static void __init quirk_sp1011(struct pci_dev *dev)
+static void __devinit quirk_sp1011(struct pci_dev *dev)
{
pci_write_config_byte(dev, 0x64, 0xff);
}
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index a1e7e6d..bc13e29 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -495,7 +495,7 @@
}
#ifdef CONFIG_TOSHIBA_FPCIB0
-static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
+static void __devinit tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
{
struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus);
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 0fbe4c0..fdc2444 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -212,7 +212,7 @@
bridge->b_widget.w_tflush; /* Flush */
}
-static void __init pci_fixup_ioc3(struct pci_dev *d)
+static void __devinit pci_fixup_ioc3(struct pci_dev *d)
{
pci_disable_swapping(d);
}
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index ea45353..075d87a 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -129,7 +129,7 @@
/* setup reset gpio used by pci */
reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
- if (reset_gpio > 0)
+ if (gpio_is_valid(reset_gpio))
devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset");
/* enable auto-switching between PCI and EBU */
@@ -192,7 +192,7 @@
ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
/* toggle reset pin */
- if (reset_gpio > 0) {
+ if (gpio_is_valid(reset_gpio)) {
__gpio_set_value(reset_gpio, 0);
wmb();
mdelay(1);
diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
index 1644805..172af1c 100644
--- a/arch/mips/pci/pci-xlr.c
+++ b/arch/mips/pci/pci-xlr.c
@@ -41,6 +41,7 @@
#include <linux/irq.h>
#include <linux/irqdesc.h>
#include <linux/console.h>
+#include <linux/pci_regs.h>
#include <asm/io.h>
@@ -156,35 +157,55 @@
.io_offset = 0x00000000UL,
};
+/*
+ * The top level PCIe links on the XLS PCIe controller appear as
+ * bridges. Given a device, this function finds which link it is
+ * on.
+ */
+static struct pci_dev *xls_get_pcie_link(const struct pci_dev *dev)
+{
+ struct pci_bus *bus, *p;
+
+ /* Find the bridge on bus 0 */
+ bus = dev->bus;
+ for (p = bus->parent; p && p->number != 0; p = p->parent)
+ bus = p;
+
+ return p ? bus->self : NULL;
+}
+
static int get_irq_vector(const struct pci_dev *dev)
{
+ struct pci_dev *lnk;
+
if (!nlm_chip_is_xls())
- return PIC_PCIX_IRQ; /* for XLR just one IRQ*/
+ return PIC_PCIX_IRQ; /* for XLR just one IRQ */
/*
* For XLS PCIe, there is an IRQ per Link, find out which
* link the device is on to assign interrupts
- */
- if (dev->bus->self == NULL)
+ */
+ lnk = xls_get_pcie_link(dev);
+ if (lnk == NULL)
return 0;
- switch (dev->bus->self->devfn) {
- case 0x0:
+ switch (PCI_SLOT(lnk->devfn)) {
+ case 0:
return PIC_PCIE_LINK0_IRQ;
- case 0x8:
+ case 1:
return PIC_PCIE_LINK1_IRQ;
- case 0x10:
+ case 2:
if (nlm_chip_is_xls_b())
return PIC_PCIE_XLSB0_LINK2_IRQ;
else
return PIC_PCIE_LINK2_IRQ;
- case 0x18:
+ case 3:
if (nlm_chip_is_xls_b())
return PIC_PCIE_XLSB0_LINK3_IRQ;
else
return PIC_PCIE_LINK3_IRQ;
}
- WARN(1, "Unexpected devfn %d\n", dev->bus->self->devfn);
+ WARN(1, "Unexpected devfn %d\n", lnk->devfn);
return 0;
}
@@ -202,7 +223,27 @@
int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
{
struct msi_msg msg;
+ struct pci_dev *lnk;
int irq, ret;
+ u16 val;
+
+ /* MSI not supported on XLR */
+ if (!nlm_chip_is_xls())
+ return 1;
+
+ /*
+ * Enable MSI on the XLS PCIe controller bridge which was disabled
+ * at enumeration, the bridge MSI capability is at 0x50
+ */
+ lnk = xls_get_pcie_link(dev);
+ if (lnk == NULL)
+ return 1;
+
+ pci_read_config_word(lnk, 0x50 + PCI_MSI_FLAGS, &val);
+ if ((val & PCI_MSI_FLAGS_ENABLE) == 0) {
+ val |= PCI_MSI_FLAGS_ENABLE;
+ pci_write_config_word(lnk, 0x50 + PCI_MSI_FLAGS, val);
+ }
irq = get_irq_vector(dev);
if (irq <= 0)
@@ -327,7 +368,7 @@
}
} else {
/* XLR PCI controller ACK */
- irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, xlr_pci_ack);
+ irq_set_handler_data(PIC_PCIX_IRQ, xlr_pci_ack);
}
return 0;
diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c
index b71fae2..5edab2b 100644
--- a/arch/mips/pmc-sierra/yosemite/smp.c
+++ b/arch/mips/pmc-sierra/yosemite/smp.c
@@ -115,11 +115,11 @@
*/
static void __cpuinit yos_init_secondary(void)
{
- set_c0_status(ST0_CO | ST0_IE | ST0_IM);
}
static void __cpuinit yos_smp_finish(void)
{
+ set_c0_status(ST0_CO | ST0_IM | ST0_IE);
}
/* Hook for after all CPUs are online */
diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c
index 0a170e0..7773f3d 100644
--- a/arch/mips/powertv/asic/asic-calliope.c
+++ b/arch/mips/powertv/asic/asic-calliope.c
@@ -28,7 +28,7 @@
#define CALLIOPE_ADDR(x) (CALLIOPE_IO_BASE + (x))
-const struct register_map calliope_register_map __initdata = {
+const struct register_map calliope_register_map __initconst = {
.eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)},
.eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)},
.eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)},
diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c
index bbc0c12..da076db 100644
--- a/arch/mips/powertv/asic/asic-cronus.c
+++ b/arch/mips/powertv/asic/asic-cronus.c
@@ -28,7 +28,7 @@
#define CRONUS_ADDR(x) (CRONUS_IO_BASE + (x))
-const struct register_map cronus_register_map __initdata = {
+const struct register_map cronus_register_map __initconst = {
.eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)},
.eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)},
.eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)},
diff --git a/arch/mips/powertv/asic/asic-gaia.c b/arch/mips/powertv/asic/asic-gaia.c
index 91dda68..47683b3 100644
--- a/arch/mips/powertv/asic/asic-gaia.c
+++ b/arch/mips/powertv/asic/asic-gaia.c
@@ -23,7 +23,7 @@
#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
-const struct register_map gaia_register_map __initdata = {
+const struct register_map gaia_register_map __initconst = {
.eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000},
.eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038},
.eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C},
diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c
index 4a05bb0..6ff4b10f 100644
--- a/arch/mips/powertv/asic/asic-zeus.c
+++ b/arch/mips/powertv/asic/asic-zeus.c
@@ -28,7 +28,7 @@
#define ZEUS_ADDR(x) (ZEUS_IO_BASE + (x))
-const struct register_map zeus_register_map __initdata = {
+const struct register_map zeus_register_map __initconst = {
.eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)},
.eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)},
.eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)},
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 682efb0..64eb71b 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -269,7 +269,7 @@
return err;
}
-static void __init quirk_slc90e66_bridge(struct pci_dev *dev)
+static void __devinit quirk_slc90e66_bridge(struct pci_dev *dev)
{
int irq; /* PCI/ISA Bridge interrupt */
u8 reg_64;
diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h
index 55b79ef..44251b9 100644
--- a/arch/mn10300/include/asm/ptrace.h
+++ b/arch/mn10300/include/asm/ptrace.h
@@ -81,9 +81,6 @@
#define PTRACE_GETFPREGS 14
#define PTRACE_SETFPREGS 15
-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD 0x00000001
-
#ifdef __KERNEL__
#define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL)
diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h
index 08251d6..ac519bb 100644
--- a/arch/mn10300/include/asm/thread_info.h
+++ b/arch/mn10300/include/asm/thread_info.h
@@ -123,7 +123,7 @@
}
#ifndef CONFIG_KGDB
-void arch_release_thread_info(struct thread_info *ti)
+void arch_release_thread_info(struct thread_info *ti);
#endif
#define get_thread_info(ti) get_task_struct((ti)->task)
#define put_thread_info(ti) put_task_struct((ti)->task)
diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h
index bd4e90d..f8e6642 100644
--- a/arch/mn10300/include/asm/timex.h
+++ b/arch/mn10300/include/asm/timex.h
@@ -11,7 +11,6 @@
#ifndef _ASM_TIMEX_H
#define _ASM_TIMEX_H
-#include <asm/hardirq.h>
#include <unit/timex.h>
#define TICK_SIZE (tick_nsec / 1000)
@@ -30,16 +29,6 @@
extern int init_clockevents(void);
extern int init_clocksource(void);
-static inline void setup_jiffies_interrupt(int irq,
- struct irqaction *action)
-{
- u16 tmp;
- setup_irq(irq, action);
- set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL));
- GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
- tmp = GxICR(irq);
-}
-
#endif /* __KERNEL__ */
#endif /* _ASM_TIMEX_H */
diff --git a/arch/mn10300/kernel/cevt-mn10300.c b/arch/mn10300/kernel/cevt-mn10300.c
index 69cae02..ccce35e 100644
--- a/arch/mn10300/kernel/cevt-mn10300.c
+++ b/arch/mn10300/kernel/cevt-mn10300.c
@@ -70,6 +70,16 @@
{
}
+static inline void setup_jiffies_interrupt(int irq,
+ struct irqaction *action)
+{
+ u16 tmp;
+ setup_irq(irq, action);
+ set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL));
+ GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+ tmp = GxICR(irq);
+}
+
int __init init_clockevents(void)
{
struct clock_event_device *cd;
diff --git a/arch/mn10300/kernel/internal.h b/arch/mn10300/kernel/internal.h
index a5ac755..2df4401 100644
--- a/arch/mn10300/kernel/internal.h
+++ b/arch/mn10300/kernel/internal.h
@@ -9,6 +9,8 @@
* 2 of the Licence, or (at your option) any later version.
*/
+#include <linux/irqreturn.h>
+
struct clocksource;
struct clock_event_device;
diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c
index 2381df8..35932a8 100644
--- a/arch/mn10300/kernel/irq.c
+++ b/arch/mn10300/kernel/irq.c
@@ -170,9 +170,9 @@
case SC1TXIRQ:
#ifdef CONFIG_MN10300_TTYSM1_TIMER12
case TM12IRQ:
-#elif CONFIG_MN10300_TTYSM1_TIMER9
+#elif defined(CONFIG_MN10300_TTYSM1_TIMER9)
case TM9IRQ:
-#elif CONFIG_MN10300_TTYSM1_TIMER3
+#elif defined(CONFIG_MN10300_TTYSM1_TIMER3)
case TM3IRQ:
#endif /* CONFIG_MN10300_TTYSM1_TIMER12 */
#endif /* CONFIG_MN10300_TTYSM1 */
diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index 6ab0bee..4d584ae 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -459,10 +459,11 @@
else
ret = setup_frame(sig, ka, oldset, regs);
if (ret)
- return;
+ return ret;
signal_delivered(sig, info, ka, regs,
- test_thread_flag(TIF_SINGLESTEP));
+ test_thread_flag(TIF_SINGLESTEP));
+ return 0;
}
/*
diff --git a/arch/mn10300/kernel/smp.c b/arch/mn10300/kernel/smp.c
index 090d35d..e62c223 100644
--- a/arch/mn10300/kernel/smp.c
+++ b/arch/mn10300/kernel/smp.c
@@ -876,9 +876,7 @@
notify_cpu_starting(cpu);
- ipi_call_lock();
set_cpu_online(cpu, true);
- ipi_call_unlock();
local_irq_enable();
}
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
index 94a9c6d..b900e5a 100644
--- a/arch/mn10300/kernel/traps.c
+++ b/arch/mn10300/kernel/traps.c
@@ -26,6 +26,7 @@
#include <linux/kdebug.h>
#include <linux/bug.h>
#include <linux/irq.h>
+#include <linux/export.h>
#include <asm/processor.h>
#include <linux/uaccess.h>
#include <asm/io.h>
diff --git a/arch/mn10300/mm/dma-alloc.c b/arch/mn10300/mm/dma-alloc.c
index 159acb0..e244ebe 100644
--- a/arch/mn10300/mm/dma-alloc.c
+++ b/arch/mn10300/mm/dma-alloc.c
@@ -15,6 +15,7 @@
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/gfp.h>
+#include <linux/export.h>
#include <asm/io.h>
static unsigned long pci_sram_allocated = 0xbc000000;
diff --git a/arch/mn10300/unit-asb2303/include/unit/timex.h b/arch/mn10300/unit-asb2303/include/unit/timex.h
index cc18fe7..c37f983 100644
--- a/arch/mn10300/unit-asb2303/include/unit/timex.h
+++ b/arch/mn10300/unit-asb2303/include/unit/timex.h
@@ -11,10 +11,6 @@
#ifndef _ASM_UNIT_TIMEX_H
#define _ASM_UNIT_TIMEX_H
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
#include <asm/timer-regs.h>
#include <unit/clock.h>
#include <asm/param.h>
diff --git a/arch/mn10300/unit-asb2303/smc91111.c b/arch/mn10300/unit-asb2303/smc91111.c
index 43c2464..5367769 100644
--- a/arch/mn10300/unit-asb2303/smc91111.c
+++ b/arch/mn10300/unit-asb2303/smc91111.c
@@ -15,6 +15,7 @@
#include <linux/platform_device.h>
#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/timex.h>
#include <asm/processor.h>
#include <asm/intctl-regs.h>
diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h
index 758af30..4cefc224 100644
--- a/arch/mn10300/unit-asb2305/include/unit/timex.h
+++ b/arch/mn10300/unit-asb2305/include/unit/timex.h
@@ -11,10 +11,6 @@
#ifndef _ASM_UNIT_TIMEX_H
#define _ASM_UNIT_TIMEX_H
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
#include <asm/timer-regs.h>
#include <unit/clock.h>
#include <asm/param.h>
diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c
index e1becd6..bc4adfa 100644
--- a/arch/mn10300/unit-asb2305/unit-init.c
+++ b/arch/mn10300/unit-asb2305/unit-init.c
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/processor.h>
#include <asm/intctl-regs.h>
diff --git a/arch/mn10300/unit-asb2364/include/unit/timex.h b/arch/mn10300/unit-asb2364/include/unit/timex.h
index ddb7ed0..42f32db 100644
--- a/arch/mn10300/unit-asb2364/include/unit/timex.h
+++ b/arch/mn10300/unit-asb2364/include/unit/timex.h
@@ -11,10 +11,6 @@
#ifndef _ASM_UNIT_TIMEX_H
#define _ASM_UNIT_TIMEX_H
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
#include <asm/timer-regs.h>
#include <unit/clock.h>
#include <asm/param.h>
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index a47828d..6266730 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -300,9 +300,7 @@
notify_cpu_starting(cpunum);
- ipi_call_lock();
set_cpu_online(cpunum, true);
- ipi_call_unlock();
/* Initialise the idle task for this CPU */
atomic_inc(&init_mm.mm_count);
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 050cb37..9a5d3cd 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -653,7 +653,7 @@
config FSL_SOC
bool
select HAVE_CAN_FLEXCAN if NET && CAN
- select PPC_CLOCK if CAN_FLEXCAN
+ select PPC_CLOCK
config FSL_PCI
bool
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index e5f2689..5416e28 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -331,4 +331,13 @@
If you are unsure, say Y.
+config FAIL_IOMMU
+ bool "Fault-injection capability for IOMMU"
+ depends on FAULT_INJECTION
+ help
+ Provide fault-injection capability for IOMMU. Each device can
+ be selectively enabled via the fail_iommu property.
+
+ If you are unsure, say N.
+
endmenu
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index e8461cb..b7d8333 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -62,26 +62,45 @@
$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o): \
$(addprefix $(obj)/,$(libfdtheader))
-src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
+src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \
$(libfdt) libfdt-wrapper.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
- gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
- 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
- cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
- fsl-soc.c mpc8xx.c pq2.c ugecon.c
-src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
- cuboot-ebony.c cuboot-hotfoot.c epapr.c treeboot-ebony.c \
- prpmc2800.c \
- ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
- cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
- cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
- fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
- cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
- cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
- virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
- cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
- gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c \
- treeboot-currituck.c
+ gunzip_util.c elf_util.c $(zlib) devtree.c stdlib.c \
+ oflib.c ofconsole.c cuboot.c mpsc.c cpm-serial.c \
+ uartlite.c mpc52xx-psc.c
+src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
+src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
+src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c
+src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
+src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c
+
+src-plat-y := of.c
+src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \
+ treeboot-walnut.c cuboot-acadia.c \
+ cuboot-kilauea.c simpleboot.c \
+ virtex405-head.S virtex.c
+src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
+ cuboot-bamboo.c cuboot-sam440ep.c \
+ cuboot-sequoia.c cuboot-rainier.c \
+ cuboot-taishan.c cuboot-katmai.c \
+ cuboot-warp.c cuboot-yosemite.c \
+ treeboot-iss4xx.c treeboot-currituck.c \
+ simpleboot.c fixed-head.S virtex.c
+src-plat-$(CONFIG_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
+src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c
+src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c
+src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c
+src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
+src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
+ cuboot-c2k.c gamecube-head.S \
+ gamecube.c wii-head.S wii.c holly.c \
+ prpmc2800.c
+src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
+src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
+src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c
+
+src-wlib := $(sort $(src-wlib-y))
+src-plat := $(sort $(src-plat-y))
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -257,7 +276,6 @@
image-$(CONFIG_TQM8555) += cuImage.tqm8555
image-$(CONFIG_TQM8560) += cuImage.tqm8560
image-$(CONFIG_SBC8548) += cuImage.sbc8548
-image-$(CONFIG_SBC8560) += cuImage.sbc8560
image-$(CONFIG_KSI8560) += cuImage.ksi8560
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
@@ -412,4 +430,3 @@
$(call cmd,install_wrapper)
$(obj)/bootwrapper_install: $(all-installed)
-
diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dts b/arch/powerpc/boot/dts/bsc9131rdb.dts
new file mode 100644
index 0000000..e13d2d4
--- /dev/null
+++ b/arch/powerpc/boot/dts/bsc9131rdb.dts
@@ -0,0 +1,34 @@
+/*
+ * BSC9131 RDB Device Tree Source
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/bsc9131si-pre.dtsi"
+
+/ {
+ model = "fsl,bsc9131rdb";
+ compatible = "fsl,bsc9131rdb";
+
+ memory {
+ device_type = "memory";
+ };
+
+ board_ifc: ifc: ifc@ff71e000 {
+ /* NAND Flash on board */
+ ranges = <0x0 0x0 0x0 0xff800000 0x00004000>;
+ reg = <0x0 0xff71e000 0x0 0x2000>;
+ };
+
+ board_soc: soc: soc@ff700000 {
+ ranges = <0x0 0x0 0xff700000 0x100000>;
+ };
+};
+
+/include/ "bsc9131rdb.dtsi"
+/include/ "fsl/bsc9131si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
new file mode 100644
index 0000000..638adda
--- /dev/null
+++ b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
@@ -0,0 +1,142 @@
+/*
+ * BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_ifc {
+
+ nand@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x0 0x0 0x4000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 3MB for u-boot Bootloader Image */
+ reg = <0x0 0x00300000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@300000 {
+ /* 1MB for DTB Image */
+ reg = <0x00300000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@400000 {
+ /* 8MB for Linux Kernel Image */
+ reg = <0x00400000 0x00800000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@c00000 {
+ /* Rest space for Root file System Image */
+ reg = <0x00c00000 0x07400000>;
+ label = "NAND RFS Image";
+ };
+ };
+};
+
+&board_soc {
+ /* BSC9131RDB does not have any device on i2c@3100 */
+ i2c@3100 {
+ status = "disabled";
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ /* 512KB for u-boot Bootloader Image */
+ partition@0 {
+ reg = <0x0 0x00080000>;
+ label = "SPI Flash U-Boot Image";
+ read-only;
+ };
+
+ /* 512KB for DTB Image */
+ partition@80000 {
+ reg = <0x00080000 0x00080000>;
+ label = "SPI Flash DTB Image";
+ };
+
+ /* 4MB for Linux Kernel Image */
+ partition@100000 {
+ reg = <0x00100000 0x00400000>;
+ label = "SPI Flash Kernel Image";
+ };
+
+ /*11MB for RFS Image */
+ partition@500000 {
+ reg = <0x00500000 0x00B00000>;
+ label = "SPI Flash RFS Image";
+ };
+
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x3>;
+ };
+ };
+
+ sdhci@2e000 {
+ status = "disabled";
+ };
+
+ enet0: ethernet@b0000 {
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi
new file mode 100644
index 0000000..5180d9d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi
@@ -0,0 +1,193 @@
+/*
+ * BSC9131 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc", "simple-bus";
+ interrupts = <16 2 0 0 20 2 0 0>;
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,bsc9131-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,bsc9131-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,bsc9131-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+ i2c@3000 {
+ interrupts = <17 2 0 0>;
+ };
+
+/include/ "pq3-i2c-1.dtsi"
+ i2c@3100 {
+ interrupts = <17 2 0 0>;
+ };
+
+/include/ "pq3-duart-0.dtsi"
+ serial0: serial@4500 {
+ interrupts = <18 2 0 0>;
+ };
+
+ serial1: serial@4600 {
+ interrupts = <18 2 0 0 >;
+ };
+/include/ "pq3-espi-0.dtsi"
+ spi0: spi@7000 {
+ fsl,espi-num-chipselects = <1>;
+ interrupts = <22 0x2 0 0>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+ gpio-controller@f000 {
+ interrupts = <19 0x2 0 0>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,bsc9131-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+
+dma@21300 {
+
+ dma-channel@0 {
+ interrupts = <62 2 0 0>;
+ };
+
+ dma-channel@80 {
+ interrupts = <63 2 0 0>;
+ };
+
+ dma-channel@100 {
+ interrupts = <64 2 0 0>;
+ };
+
+ dma-channel@180 {
+ interrupts = <65 2 0 0>;
+ };
+};
+
+/include/ "pq3-usb2-dr-0.dtsi"
+usb@22000 {
+ compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
+ interrupts = <40 0x2 0 0>;
+};
+
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ fsl,sdhci-auto-cmd12;
+ interrupts = <41 0x2 0 0>;
+ };
+
+/include/ "pq3-sec4.4-0.dtsi"
+crypto@30000 {
+ interrupts = <57 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ interrupts = <58 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ interrupts = <59 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ interrupts = <60 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ interrupts = <61 2 0 0>;
+ };
+};
+
+/include/ "pq3-mpic.dtsi"
+
+timer@41100 {
+ compatible = "fsl,mpic-v1.2-msgr", "fsl,mpic-msg";
+ reg = <0x41400 0x200>;
+ interrupts = <
+ 0xb0 2
+ 0xb1 2
+ 0xb2 2
+ 0xb3 2>;
+};
+
+/include/ "pq3-etsec2-0.dtsi"
+enet0: ethernet@b0000 {
+ queue-group@b0000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
+ };
+};
+
+/include/ "pq3-etsec2-1.dtsi"
+enet1: ethernet@b1000 {
+ queue-group@b1000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
+ };
+};
+
+global-utilities@e0000 {
+ compatible = "fsl,bsc9131-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi
new file mode 100644
index 0000000..743e4ae
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi
@@ -0,0 +1,59 @@
+/*
+ * BSC9131 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,BSC9131";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,BSC9131@0 {
+ device_type = "cpu";
+ compatible = "fsl,e500v2";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
index 4252ef8..adb82fd 100644
--- a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
@@ -1,7 +1,7 @@
/*
* P1021/P1012 Silicon/SoC Device Tree Source (post include)
*
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -213,6 +213,20 @@
interrupt-parent = <&qeic>;
};
+ ucc@2600 {
+ cell-index = <7>;
+ reg = <0x2600 0x200>;
+ interrupts = <42>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2200 {
+ cell-index = <3>;
+ reg = <0x2200 0x200>;
+ interrupts = <34>;
+ interrupt-parent = <&qeic>;
+ };
+
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
deleted file mode 100644
index b3e5692..0000000
--- a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * P3060 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
- compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
-};
-
-/* controller at 0x200000 */
-&pci0 {
- compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <33333333>;
- interrupts = <16 2 1 15>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
-};
-
-/* controller at 0x201000 */
-&pci1 {
- compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <33333333>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
-};
-
-&rio {
- compatible = "fsl,srio";
- interrupts = <16 2 1 11>;
- #address-cells = <2>;
- #size-cells = <2>;
- fsl,srio-rmu-handle = <&rmu>;
- ranges;
-
- port1 {
- #address-cells = <2>;
- #size-cells = <2>;
- cell-index = <1>;
- };
-
- port2 {
- #address-cells = <2>;
- #size-cells = <2>;
- cell-index = <2>;
- };
-};
-
-&dcsr {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr1>;
- reg = <0x12000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@44000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu4>;
- reg = <0x44000 0x1000>;
- };
- dcsr-cpu-sb-proxy@45000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu5>;
- reg = <0x45000 0x1000>;
- };
- dcsr-cpu-sb-proxy@46000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu6>;
- reg = <0x46000 0x1000>;
- };
- dcsr-cpu-sb-proxy@47000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu7>;
- reg = <0x47000 0x1000>;
- };
-
-};
-
-&soc {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr1: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p3060-l3-cache-controller", "cache";
- reg = <0x10000 0x1000
- 0x11000 0x1000>;
- interrupts = <16 2 1 27
- 16 2 1 26>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x5000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
-/include/ "qoriq-rmu-0.dtsi"
-/include/ "qoriq-mpic.dtsi"
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p3060-serdes";
- reg = <0xea000 0x1000>;
- };
-
-/include/ "qoriq-dma-0.dtsi"
-/include/ "qoriq-dma-1.dtsi"
-/include/ "qoriq-espi-0.dtsi"
- spi@110000 {
- fsl,espi-num-chipselects = <4>;
- };
-
-/include/ "qoriq-i2c-0.dtsi"
-/include/ "qoriq-i2c-1.dtsi"
-/include/ "qoriq-duart-0.dtsi"
-/include/ "qoriq-duart-1.dtsi"
-/include/ "qoriq-gpio-0.dtsi"
-/include/ "qoriq-usb2-mph-0.dtsi"
- usb@210000 {
- compatible = "fsl-usb2-mph-v2.2", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- };
-/include/ "qoriq-usb2-dr-0.dtsi"
- usb@211000 {
- compatible = "fsl-usb2-dr-v2.2", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- };
-/include/ "qoriq-sec4.1-0.dtsi"
-};
diff --git a/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
deleted file mode 100644
index 00c8e70..0000000
--- a/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * P3060 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P3060";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu4: PowerPC,e500mc@4 {
- device_type = "cpu";
- reg = <4>;
- next-level-cache = <&L2_4>;
- L2_4: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu5: PowerPC,e500mc@5 {
- device_type = "cpu";
- reg = <5>;
- next-level-cache = <&L2_5>;
- L2_5: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu6: PowerPC,e500mc@6 {
- device_type = "cpu";
- reg = <6>;
- next-level-cache = <&L2_6>;
- L2_6: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu7: PowerPC,e500mc@7 {
- device_type = "cpu";
- reg = <7>;
- next-level-cache = <&L2_7>;
- L2_7: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts
index ededaf5..d72fb5e 100644
--- a/arch/powerpc/boot/dts/mgcoge.dts
+++ b/arch/powerpc/boot/dts/mgcoge.dts
@@ -222,6 +222,29 @@
interrupt-parent = <&PIC>;
usb-clock = <5>;
};
+ spi@11aa0 {
+ cell-index = <0>;
+ compatible = "fsl,spi", "fsl,cpm2-spi";
+ reg = <0x11a80 0x40 0x89fc 0x2>;
+ interrupts = <2 8>;
+ interrupt-parent = <&PIC>;
+ gpios = < &cpm2_pio_d 19 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ds3106@1 {
+ compatible = "gen,spidev";
+ reg = <0>;
+ spi-max-frequency = <8000000>;
+ };
+ };
+
+ };
+
+ cpm2_pio_d: gpio-controller@10d60 {
+ #gpio-cells = <2>;
+ compatible = "fsl,cpm2-pario-bank";
+ reg = <0x10d60 0x14>;
+ gpio-controller;
};
cpm2_pio_c: gpio-controller@10d40 {
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/mpc8536ds.dtsi
index cc46dbd..d304a2d 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dtsi
+++ b/arch/powerpc/boot/dts/mpc8536ds.dtsi
@@ -203,6 +203,14 @@
reg = <1>;
device_type = "ethernet-phy";
};
+ sgmii_phy0: sgmii-phy@0 {
+ interrupts = <6 1 0 0>;
+ reg = <0x1d>;
+ };
+ sgmii_phy1: sgmii-phy@1 {
+ interrupts = <6 1 0 0>;
+ reg = <0x1c>;
+ };
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dtsi b/arch/powerpc/boot/dts/mpc8544ds.dtsi
index 270f64b..77ebc9f 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dtsi
+++ b/arch/powerpc/boot/dts/mpc8544ds.dtsi
@@ -51,6 +51,15 @@
device_type = "ethernet-phy";
};
+ sgmii_phy0: sgmii-phy@0 {
+ interrupts = <6 1 0 0>;
+ reg = <0x1c>;
+ };
+ sgmii_phy1: sgmii-phy@1 {
+ interrupts = <6 1 0 0>;
+ reg = <0x1d>;
+ };
+
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dtsi b/arch/powerpc/boot/dts/mpc8572ds.dtsi
index 1417894..357490b 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dtsi
+++ b/arch/powerpc/boot/dts/mpc8572ds.dtsi
@@ -169,6 +169,23 @@
reg = <0x3>;
};
+ sgmii_phy0: sgmii-phy@0 {
+ interrupts = <6 1 0 0>;
+ reg = <0x1c>;
+ };
+ sgmii_phy1: sgmii-phy@1 {
+ interrupts = <6 1 0 0>;
+ reg = <0x1d>;
+ };
+ sgmii_phy2: sgmii-phy@2 {
+ interrupts = <7 1 0 0>;
+ reg = <0x1e>;
+ };
+ sgmii_phy3: sgmii-phy@3 {
+ interrupts = <7 1 0 0>;
+ reg = <0x1f>;
+ };
+
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index d34d127..ef9ef56 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -67,10 +67,10 @@
msi@41600 {
msi-available-ranges = <0 0x80>;
interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0>;
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0>;
};
timer@42100 {
status = "disabled";
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index d6a8faf..24564ee 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -67,9 +67,6 @@
ethernet@24000 {
status = "disabled";
};
- mdio@24520 {
- status = "disabled";
- };
ptp_clock@24e00 {
status = "disabled";
};
@@ -100,10 +97,10 @@
msi@41600 {
msi-available-ranges = <0x80 0x80>;
interrupts = <
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
};
global-utilities@e0000 {
status = "disabled";
diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
index 4977614..ec7c27a 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
@@ -126,12 +126,24 @@
&board_soc {
i2c@3000 {
+ eeprom@50 {
+ compatible = "st,24c256";
+ reg = <0x50>;
+ };
+
rtc@68 {
compatible = "pericom,pt7c4338";
reg = <0x68>;
};
};
+ i2c@3100 {
+ eeprom@52 {
+ compatible = "atmel,24c01";
+ reg = <0x52>;
+ };
+ };
+
spi@7000 {
flash@0 {
#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/p1021rdb.dtsi b/arch/powerpc/boot/dts/p1021rdb-pc.dtsi
similarity index 98%
rename from arch/powerpc/boot/dts/p1021rdb.dtsi
rename to arch/powerpc/boot/dts/p1021rdb-pc.dtsi
index b973461..c13abfb 100644
--- a/arch/powerpc/boot/dts/p1021rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1021rdb-pc.dtsi
@@ -1,7 +1,7 @@
/*
* P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
*
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
diff --git a/arch/powerpc/boot/dts/p1021rdb.dts b/arch/powerpc/boot/dts/p1021rdb-pc_32b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1021rdb.dts
rename to arch/powerpc/boot/dts/p1021rdb-pc_32b.dts
index 90b6b4c..7cefa12 100644
--- a/arch/powerpc/boot/dts/p1021rdb.dts
+++ b/arch/powerpc/boot/dts/p1021rdb-pc_32b.dts
@@ -1,7 +1,7 @@
/*
* P1021 RDB Device Tree Source
*
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -92,5 +92,5 @@
};
};
-/include/ "p1021rdb.dtsi"
+/include/ "p1021rdb-pc.dtsi"
/include/ "fsl/p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1021rdb_36b.dts b/arch/powerpc/boot/dts/p1021rdb-pc_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1021rdb_36b.dts
rename to arch/powerpc/boot/dts/p1021rdb-pc_36b.dts
index ea6d8b5..53d0c88 100644
--- a/arch/powerpc/boot/dts/p1021rdb_36b.dts
+++ b/arch/powerpc/boot/dts/p1021rdb-pc_36b.dts
@@ -1,7 +1,7 @@
/*
* P1021 RDB Device Tree Source (36-bit address map)
*
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -92,5 +92,5 @@
};
};
-/include/ "p1021rdb.dtsi"
+/include/ "p1021rdb-pc.dtsi"
/include/ "fsl/p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1022ds.dtsi b/arch/powerpc/boot/dts/p1022ds.dtsi
index 7cdb505..c3344b0 100644
--- a/arch/powerpc/boot/dts/p1022ds.dtsi
+++ b/arch/powerpc/boot/dts/p1022ds.dtsi
@@ -33,22 +33,6 @@
*/
&board_lbc {
- /*
- * This node is used to access the pixis via "indirect" mode,
- * which is done by writing the pixis register index to chip
- * select 0 and the value to/from chip select 1. Indirect
- * mode is the only way to access the pixis when DIU video
- * is enabled. Note that this assumes that the first column
- * of the 'ranges' property above is the chip select number.
- */
- board-control@0,0 {
- compatible = "fsl,p1022ds-indirect-pixis";
- reg = <0x0 0x0 1 /* CS0 */
- 0x1 0x0 1>; /* CS1 */
- interrupt-parent = <&mpic>;
- interrupts = <8 0 0 0>;
- };
-
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
@@ -161,6 +145,10 @@
* the clock is enabled.
*/
};
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
};
spi@7000 {
diff --git a/arch/powerpc/boot/dts/p1021rdb.dtsi b/arch/powerpc/boot/dts/p1024rdb.dtsi
similarity index 79%
copy from arch/powerpc/boot/dts/p1021rdb.dtsi
copy to arch/powerpc/boot/dts/p1024rdb.dtsi
index b973461..b05dcb4 100644
--- a/arch/powerpc/boot/dts/p1021rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1024rdb.dtsi
@@ -1,7 +1,7 @@
/*
- * P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
+ * P1024 RDB Device Tree Source stub (no addresses or top-level ranges)
*
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -73,14 +73,15 @@
/* 512KB for u-boot Environment Variables */
reg = <0x00f00000 0x00100000>;
label = "NOR U-Boot Image";
+ read-only;
};
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,p1021-fcm-nand",
- "fsl,elbc-fcm-nand";
+ compatible = "fsl,p1020-fcm-nand",
+ "fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x40000>;
partition@0 {
@@ -110,127 +111,118 @@
};
partition@a00000 {
- /* 7MB for JFFS2 based Root file System */
- reg = <0x00a00000 0x00700000>;
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00f00000>;
label = "NAND JFFS2 Root File System";
};
- partition@1100000 {
- /* 15MB for User Writable Area */
- reg = <0x01100000 0x00f00000>;
+ partition@1900000 {
+ /* 7MB for User Writable Area */
+ reg = <0x01900000 0x00700000>;
label = "NAND Writable User area";
};
};
-
- L2switch@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "vitesse-7385";
- reg = <0x2 0x0 0x20000>;
- };
};
&soc {
- i2c@3000 {
- rtc@68 {
- compatible = "pericom,pt7c4338";
- reg = <0x68>;
- };
- };
-
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25sl12801";
+ compatible = "spansion,m25p80";
reg = <0>;
- spi-max-frequency = <40000000>; /* input clock */
+ spi-max-frequency = <40000000>;
- partition@u-boot {
+ partition@0 {
/* 512KB for u-boot Bootloader Image */
reg = <0x0 0x00080000>;
- label = "SPI Flash U-Boot Image";
+ label = "SPI U-Boot Image";
read-only;
};
- partition@dtb {
+ partition@80000 {
/* 512KB for DTB Image */
reg = <0x00080000 0x00080000>;
- label = "SPI Flash DTB Image";
+ label = "SPI DTB Image";
};
- partition@kernel {
+ partition@100000 {
/* 4MB for Linux Kernel Image */
reg = <0x00100000 0x00400000>;
- label = "SPI Flash Linux Kernel Image";
+ label = "SPI Linux Kernel Image";
};
- partition@fs {
+ partition@500000 {
/* 4MB for Compressed RFS Image */
reg = <0x00500000 0x00400000>;
- label = "SPI Flash Compressed RFSImage";
+ label = "SPI Compressed RFS Image";
};
- partition@jffs-fs {
+ partition@900000 {
/* 7MB for JFFS2 based RFS */
reg = <0x00900000 0x00700000>;
- label = "SPI Flash JFFS2 RFS";
+ label = "SPI JFFS2 RFS";
};
};
};
+ i2c@3000 {
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
usb@22000 {
phy_type = "ulpi";
};
+ usb@23000 {
+ status = "disabled";
+ };
+
mdio@24000 {
phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
interrupts = <3 1 0 0>;
reg = <0x0>;
};
-
phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
interrupts = <2 1 0 0>;
reg = <0x1>;
};
+ phy2: ethernet-phy@2 {
+ interrupts = <1 1 0 0>;
+ reg = <0x2>;
+ };
+ };
+ mdio@25000 {
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
- mdio@25000 {
+ mdio@26000 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
- mdio@26000 {
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- enet0: ethernet@b0000 {
- fixed-link = <1 1 1000 0 0>;
+ ethernet@b0000 {
+ phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
-
};
- enet1: ethernet@b1000 {
+ ethernet@b1000 {
phy-handle = <&phy0>;
- tbi-handle = <&tbi1>;
+ tbi-handle = <&tbi0>;
phy-connection-type = "sgmii";
};
- enet2: ethernet@b2000 {
+ ethernet@b2000 {
phy-handle = <&phy1>;
- tbi-handle = <&tbi2>;
phy-connection-type = "rgmii-id";
};
};
diff --git a/arch/powerpc/boot/dts/p1021rdb.dts b/arch/powerpc/boot/dts/p1024rdb_32b.dts
similarity index 65%
copy from arch/powerpc/boot/dts/p1021rdb.dts
copy to arch/powerpc/boot/dts/p1024rdb_32b.dts
index 90b6b4c..90e803e 100644
--- a/arch/powerpc/boot/dts/p1021rdb.dts
+++ b/arch/powerpc/boot/dts/p1024rdb_32b.dts
@@ -1,7 +1,7 @@
/*
- * P1021 RDB Device Tree Source
+ * P1024 RDB 32Bit Physical Address Map Device Tree Source
*
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -20,7 +20,7 @@
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
@@ -32,22 +32,19 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "fsl/p1020si-pre.dtsi"
/ {
- model = "fsl,P1021RDB";
- compatible = "fsl,P1021RDB-PC";
+ model = "fsl,P1024RDB";
+ compatible = "fsl,P1024RDB";
memory {
device_type = "memory";
};
lbc: localbus@ffe05000 {
- reg = <0 0xffe05000 0 0x1000>;
-
- /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+ reg = <0x0 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
- 0x1 0x0 0x0 0xff800000 0x00040000
- 0x2 0x0 0x0 0xffb00000 0x00020000>;
+ 0x1 0x0 0x0 0xff800000 0x00040000>;
};
soc: soc@ffe00000 {
@@ -55,12 +52,12 @@
};
pci0: pcie@ffe09000 {
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- reg = <0 0xffe09000 0 0x1000>;
+ reg = <0x0 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
pcie@0 {
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
@@ -70,12 +67,13 @@
};
pci1: pcie@ffe0a000 {
- reg = <0 0xffe0a000 0 0x1000>;
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+ reg = <0x0 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
pcie@0 {
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
@@ -83,14 +81,7 @@
0x0 0x100000>;
};
};
-
- qe: qe@ffe80000 {
- ranges = <0x0 0x0 0xffe80000 0x40000>;
- reg = <0 0xffe80000 0 0x480>;
- brg-frequency = <0>;
- bus-frequency = <0>;
- };
};
-/include/ "p1021rdb.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1024rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1021rdb_36b.dts b/arch/powerpc/boot/dts/p1024rdb_36b.dts
similarity index 71%
copy from arch/powerpc/boot/dts/p1021rdb_36b.dts
copy to arch/powerpc/boot/dts/p1024rdb_36b.dts
index ea6d8b5..3656825 100644
--- a/arch/powerpc/boot/dts/p1021rdb_36b.dts
+++ b/arch/powerpc/boot/dts/p1024rdb_36b.dts
@@ -1,7 +1,7 @@
/*
- * P1021 RDB Device Tree Source (36-bit address map)
+ * P1024 RDB 36Bit Physical Address Map Device Tree Source
*
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -20,7 +20,7 @@
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
@@ -32,10 +32,10 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "fsl/p1020si-pre.dtsi"
/ {
- model = "fsl,P1021RDB";
- compatible = "fsl,P1021RDB-PC";
+ model = "fsl,P1024RDB";
+ compatible = "fsl,P1024RDB";
memory {
device_type = "memory";
@@ -43,11 +43,8 @@
lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
-
- /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
ranges = <0x0 0x0 0xf 0xef000000 0x01000000
- 0x1 0x0 0xf 0xff800000 0x00040000
- 0x2 0x0 0xf 0xffb00000 0x00020000>;
+ 0x1 0x0 0xf 0xff800000 0x00040000>;
};
soc: soc@fffe00000 {
@@ -55,12 +52,12 @@
};
pci0: pcie@fffe09000 {
- ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
@@ -71,11 +68,12 @@
pci1: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
- ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
pcie@0 {
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
@@ -83,14 +81,7 @@
0x0 0x100000>;
};
};
-
- qe: qe@fffe80000 {
- ranges = <0x0 0xf 0xffe80000 0x40000>;
- reg = <0xf 0xffe80000 0 0x480>;
- brg-frequency = <0>;
- bus-frequency = <0>;
- };
};
-/include/ "p1021rdb.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1024rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1025rdb.dtsi b/arch/powerpc/boot/dts/p1025rdb.dtsi
index cf3676f..f502564 100644
--- a/arch/powerpc/boot/dts/p1025rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1025rdb.dtsi
@@ -282,5 +282,45 @@
0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */
0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */
};
+
+ pio3: ucc_pin@03 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x0 0x16 0x2 0x0 0x2 0x0 /* SER7_CD_B*/
+ 0x0 0x12 0x2 0x0 0x2 0x0 /* SER7_CTS_B*/
+ 0x0 0x13 0x1 0x0 0x2 0x0 /* SER7_RTS_B*/
+ 0x0 0x14 0x2 0x0 0x2 0x0 /* SER7_RXD0*/
+ 0x0 0x15 0x1 0x0 0x2 0x0>; /* SER7_TXD0*/
+ };
+
+ pio4: ucc_pin@04 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x1 0x0 0x2 0x0 0x2 0x0 /* SER3_CD_B*/
+ 0x0 0x1c 0x2 0x0 0x2 0x0 /* SER3_CTS_B*/
+ 0x0 0x1d 0x1 0x0 0x2 0x0 /* SER3_RTS_B*/
+ 0x0 0x1e 0x2 0x0 0x2 0x0 /* SER3_RXD0*/
+ 0x0 0x1f 0x1 0x0 0x2 0x0>; /* SER3_TXD0*/
+ };
+ };
+};
+
+&qe {
+ serial2: ucc@2600 {
+ device_type = "serial";
+ compatible = "ucc_uart";
+ port-number = <0>;
+ rx-clock-name = "brg6";
+ tx-clock-name = "brg6";
+ pio-handle = <&pio3>;
+ };
+
+ serial3: ucc@2200 {
+ device_type = "serial";
+ compatible = "ucc_uart";
+ port-number = <1>;
+ rx-clock-name = "brg2";
+ tx-clock-name = "brg2";
+ pio-handle = <&pio4>;
};
};
diff --git a/arch/powerpc/boot/dts/p2020ds.dtsi b/arch/powerpc/boot/dts/p2020ds.dtsi
index d3b939c..e699cf9 100644
--- a/arch/powerpc/boot/dts/p2020ds.dtsi
+++ b/arch/powerpc/boot/dts/p2020ds.dtsi
@@ -150,6 +150,16 @@
interrupts = <3 1 0 0>;
reg = <0x2>;
};
+
+ sgmii_phy1: sgmii-phy@1 {
+ interrupts = <5 1 0 0>;
+ reg = <0x1c>;
+ };
+ sgmii_phy2: sgmii-phy@2 {
+ interrupts = <5 1 0 0>;
+ reg = <0x1d>;
+ };
+
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts
index 153bc76..4d52bce 100644
--- a/arch/powerpc/boot/dts/p2020rdb.dts
+++ b/arch/powerpc/boot/dts/p2020rdb.dts
@@ -34,7 +34,7 @@
/* NOR and NAND Flashes */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
- 0x1 0x0 0x0 0xff800000 0x00040000
+ 0x1 0x0 0x0 0xffa00000 0x00040000
0x2 0x0 0x0 0xffb00000 0x00020000>;
nor@0,0 {
diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts
index 2852139..baab034 100644
--- a/arch/powerpc/boot/dts/p2041rdb.dts
+++ b/arch/powerpc/boot/dts/p2041rdb.dts
@@ -121,7 +121,8 @@
lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
- ranges = <0 0 0xf 0xe8000000 0x08000000>;
+ ranges = <0 0 0xf 0xe8000000 0x08000000
+ 1 0 0xf 0xffa00000 0x00040000>;
flash@0,0 {
compatible = "cfi-flash";
@@ -129,6 +130,44 @@
bank-width = <2>;
device-width = <2>;
};
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ label = "NAND U-Boot Image";
+ reg = <0x0 0x02000000>;
+ read-only;
+ };
+
+ partition@2000000 {
+ label = "NAND Root File System";
+ reg = <0x02000000 0x10000000>;
+ };
+
+ partition@12000000 {
+ label = "NAND Compressed RFS Image";
+ reg = <0x12000000 0x08000000>;
+ };
+
+ partition@1a000000 {
+ label = "NAND Linux Kernel Image";
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ partition@1e000000 {
+ label = "NAND DTB Image";
+ reg = <0x1e000000 0x01000000>;
+ };
+
+ partition@1f000000 {
+ label = "NAND Writable User area";
+ reg = <0x1f000000 0x01000000>;
+ };
+ };
};
pci0: pcie@ffe200000 {
diff --git a/arch/powerpc/boot/dts/p3060qds.dts b/arch/powerpc/boot/dts/p3060qds.dts
deleted file mode 100644
index 9ae875c..0000000
--- a/arch/powerpc/boot/dts/p3060qds.dts
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * P3060QDS Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p3060si-pre.dtsi"
-
-/ {
- model = "fsl,P3060QDS";
- compatible = "fsl,P3060QDS";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- memory {
- device_type = "memory";
- };
-
- dcsr: dcsr@f00000000 {
- ranges = <0x00000000 0xf 0x00000000 0x01008000>;
- };
-
- soc: soc@ffe000000 {
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
- spi@110000 {
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <40000000>; /* input clock */
- partition@u-boot {
- label = "u-boot";
- reg = <0x00000000 0x00100000>;
- read-only;
- };
- partition@kernel {
- label = "kernel";
- reg = <0x00100000 0x00500000>;
- read-only;
- };
- partition@dtb {
- label = "dtb";
- reg = <0x00600000 0x00100000>;
- read-only;
- };
- partition@fs {
- label = "file system";
- reg = <0x00700000 0x00900000>;
- };
- };
- flash@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,en25q32b";
- reg = <1>;
- spi-max-frequency = <40000000>; /* input clock */
- partition@spi1 {
- label = "spi1";
- reg = <0x00000000 0x00400000>;
- };
- };
- flash@2 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "atmel,at45db081d";
- reg = <2>;
- spi-max-frequency = <40000000>; /* input clock */
- partition@spi1 {
- label = "spi2";
- reg = <0x00000000 0x00100000>;
- };
- };
- flash@3 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,sst25wf040";
- reg = <3>;
- spi-max-frequency = <40000000>; /* input clock */
- partition@spi3 {
- label = "spi3";
- reg = <0x00000000 0x00080000>;
- };
- };
- };
-
- i2c@118000 {
- eeprom@51 {
- compatible = "at24,24c256";
- reg = <0x51>;
- };
- eeprom@53 {
- compatible = "at24,24c256";
- reg = <0x53>;
- };
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- interrupts = <0x1 0x1 0 0>;
- };
- };
-
- usb0: usb@210000 {
- phy_type = "ulpi";
- };
-
- usb1: usb@211000 {
- dr_mode = "host";
- phy_type = "ulpi";
- };
- };
-
- rio: rapidio@ffe0c0000 {
- reg = <0xf 0xfe0c0000 0 0x11000>;
-
- port1 {
- ranges = <0 0 0xc 0x20000000 0 0x10000000>;
- };
- port2 {
- ranges = <0 0 0xc 0x30000000 0 0x10000000>;
- };
- };
-
- lbc: localbus@ffe124000 {
- reg = <0xf 0xfe124000 0 0x1000>;
- ranges = <0 0 0xf 0xe8000000 0x08000000
- 2 0 0xf 0xffa00000 0x00040000
- 3 0 0xf 0xffdf0000 0x00008000>;
-
- flash@0,0 {
- compatible = "cfi-flash";
- reg = <0 0 0x08000000>;
- bank-width = <2>;
- device-width = <2>;
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- partition@0 {
- label = "NAND U-Boot Image";
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- partition@2000000 {
- label = "NAND Root File System";
- reg = <0x02000000 0x10000000>;
- };
-
- partition@12000000 {
- label = "NAND Compressed RFS Image";
- reg = <0x12000000 0x08000000>;
- };
-
- partition@1a000000 {
- label = "NAND Linux Kernel Image";
- reg = <0x1a000000 0x04000000>;
- };
-
- partition@1e000000 {
- label = "NAND DTB Image";
- reg = <0x1e000000 0x01000000>;
- };
-
- partition@1f000000 {
- label = "NAND Writable User area";
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- board-control@3,0 {
- compatible = "fsl,p3060qds-fpga", "fsl,fpga-qixis";
- reg = <3 0 0x100>;
- };
- };
-
- pci0: pcie@ffe200000 {
- reg = <0xf 0xfe200000 0 0x1000>;
- ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
- 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
- pcie@0 {
- ranges = <0x02000000 0 0xe0000000
- 0x02000000 0 0xe0000000
- 0 0x20000000
-
- 0x01000000 0 0x00000000
- 0x01000000 0 0x00000000
- 0 0x00010000>;
- };
- };
-
- pci1: pcie@ffe201000 {
- reg = <0xf 0xfe201000 0 0x1000>;
- ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
- pcie@0 {
- ranges = <0x02000000 0 0xe0000000
- 0x02000000 0 0xe0000000
- 0 0x20000000
-
- 0x01000000 0 0x00000000
- 0x01000000 0 0x00000000
- 0 0x00010000>;
- };
- };
-};
-
-/include/ "fsl/p3060si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
deleted file mode 100644
index 72078eb..0000000
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ /dev/null
@@ -1,406 +0,0 @@
-/*
- * SBC8560 Device Tree Source
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
- model = "SBC8560";
- compatible = "SBC8560";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8560@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <0x20>; // 32 bytes
- i-cache-line-size = <0x20>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>;
- };
-
- soc@ff700000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- ranges = <0x0 0xff700000 0x00100000>;
- clock-frequency = <0>;
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <8>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8560-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8560-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <0x12 0x2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8560-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <0x20>; // 32 bytes
- cache-size = <0x40000>; // L2, 256K
- interrupt-parent = <&mpic>;
- interrupts = <0x10 0x2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8560-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8560-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8560-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8560-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
- phy0: ethernet-phy@19 {
- interrupt-parent = <&mpic>;
- interrupts = <0x6 0x1>;
- reg = <0x19>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1a {
- interrupt-parent = <&mpic>;
- interrupts = <0x7 0x1>;
- reg = <0x1a>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@1b {
- interrupt-parent = <&mpic>;
- interrupts = <0x8 0x1>;
- reg = <0x1b>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@1c {
- interrupt-parent = <&mpic>;
- interrupts = <0x8 0x1>;
- reg = <0x1c>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,open-pic";
- reg = <0x40000 0x40000>;
- device_type = "open-pic";
- };
-
- cpm@919c0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
- reg = <0x919c0 0x30>;
- ranges;
-
- muram@80000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x80000 0x10000>;
-
- data@0 {
- compatible = "fsl,cpm-muram-data";
- reg = <0x0 0x4000 0x9000 0x2000>;
- };
- };
-
- brg@919f0 {
- compatible = "fsl,mpc8560-brg",
- "fsl,cpm2-brg",
- "fsl,cpm-brg";
- reg = <0x919f0 0x10 0x915f0 0x10>;
- clock-frequency = <165000000>;
- };
-
- cpmpic: pic@90c00 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- interrupts = <0x2e 0x2>;
- interrupt-parent = <&mpic>;
- reg = <0x90c00 0x80>;
- compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
- };
-
- enet2: ethernet@91320 {
- device_type = "network";
- compatible = "fsl,mpc8560-fcc-enet",
- "fsl,cpm2-fcc-enet";
- reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- fsl,cpm-command = <0x16200300>;
- interrupts = <0x21 0x8>;
- interrupt-parent = <&cpmpic>;
- phy-handle = <&phy2>;
- };
-
- enet3: ethernet@91340 {
- device_type = "network";
- compatible = "fsl,mpc8560-fcc-enet",
- "fsl,cpm2-fcc-enet";
- reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- fsl,cpm-command = <0x1a400300>;
- interrupts = <0x22 0x8>;
- interrupt-parent = <&cpmpic>;
- phy-handle = <&phy3>;
- };
- };
-
- global-utilities@e0000 {
- compatible = "fsl,mpc8560-guts";
- reg = <0xe0000 0x1000>;
- };
- };
-
- pci0: pci@ff708000 {
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
- device_type = "pci";
- reg = <0xff708000 0x1000>;
- clock-frequency = <66666666>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x02 */
- 0x1000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x1000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x1000 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x1000 0x0 0x0 0x4 &mpic 0x5 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <0x18 0x2>;
- bus-range = <0x0 0x0>;
- ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
- };
-
- localbus@ff705000 {
- compatible = "fsl,mpc8560-localbus", "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- reg = <0xff705000 0x100>; // BRx, ORx, etc.
-
- ranges = <
- 0x0 0x0 0xff800000 0x0800000 // 8MB boot flash
- 0x1 0x0 0xe4000000 0x4000000 // 64MB flash
- 0x3 0x0 0x20000000 0x4000000 // 64MB SDRAM
- 0x4 0x0 0x24000000 0x4000000 // 64MB SDRAM
- 0x5 0x0 0xfc000000 0x0c00000 // EPLD
- 0x6 0x0 0xe0000000 0x4000000 // 64MB flash
- 0x7 0x0 0x80000000 0x0200000 // ATM1,2
- >;
-
- epld@5,0 {
- compatible = "wrs,epld-localbus";
- #address-cells = <2>;
- #size-cells = <1>;
- reg = <0x5 0x0 0xc00000>;
- ranges = <
- 0x0 0x0 0x5 0x000000 0x1fff // LED disp.
- 0x1 0x0 0x5 0x100000 0x1fff // switches
- 0x2 0x0 0x5 0x200000 0x1fff // ID reg.
- 0x3 0x0 0x5 0x300000 0x1fff // status reg.
- 0x4 0x0 0x5 0x400000 0x1fff // reset reg.
- 0x5 0x0 0x5 0x500000 0x1fff // Wind port
- 0x7 0x0 0x5 0x700000 0x1fff // UART #1
- 0x8 0x0 0x5 0x800000 0x1fff // UART #2
- 0x9 0x0 0x5 0x900000 0x1fff // RTC
- 0xb 0x0 0x5 0xb00000 0x1fff // EEPROM
- >;
-
- bidr@2,0 {
- compatible = "wrs,sbc8560-bidr";
- reg = <0x2 0x0 0x10>;
- };
-
- bcsr@3,0 {
- compatible = "wrs,sbc8560-bcsr";
- reg = <0x3 0x0 0x10>;
- };
-
- brstcr@4,0 {
- compatible = "wrs,sbc8560-brstcr";
- reg = <0x4 0x0 0x10>;
- };
-
- serial0: serial@7,0 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x7 0x0 0x100>;
- clock-frequency = <1843200>;
- interrupts = <0x9 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@8,0 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x8 0x0 0x100>;
- clock-frequency = <1843200>;
- interrupts = <0xa 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- rtc@9,0 {
- compatible = "m48t59";
- reg = <0x9 0x0 0x1fff>;
- };
- };
- };
-};
diff --git a/arch/powerpc/boot/flatdevtree_env.h b/arch/powerpc/boot/flatdevtree_env.h
deleted file mode 100644
index 66e0ebb..0000000
--- a/arch/powerpc/boot/flatdevtree_env.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This file adds the header file glue so that the shared files
- * flatdevicetree.[ch] can compile and work in the powerpc bootwrapper.
- *
- * strncmp & strchr copied from <file:lib/string.c>
- * Copyright (C) 1991, 1992 Linus Torvalds
- *
- * Maintained by: Mark A. Greer <mgreer@mvista.com>
- */
-#ifndef _PPC_BOOT_FLATDEVTREE_ENV_H_
-#define _PPC_BOOT_FLATDEVTREE_ENV_H_
-
-#include <stdarg.h>
-#include <stddef.h>
-#include "types.h"
-#include "string.h"
-#include "stdio.h"
-#include "ops.h"
-
-#define be16_to_cpu(x) (x)
-#define cpu_to_be16(x) (x)
-#define be32_to_cpu(x) (x)
-#define cpu_to_be32(x) (x)
-#define be64_to_cpu(x) (x)
-#define cpu_to_be64(x) (x)
-
-#endif /* _PPC_BOOT_FLATDEVTREE_ENV_H_ */
diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig
index 07e1bbad..a0dfef1 100644
--- a/arch/powerpc/configs/83xx/kmeter1_defconfig
+++ b/arch/powerpc/configs/83xx/kmeter1_defconfig
@@ -2,14 +2,14 @@
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_SPARSE_IRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_MSDOS_PARTITION is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_PPC_CHRP is not set
@@ -31,11 +31,10 @@
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
+CONFIG_TIPC=y
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=y
CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
@@ -50,17 +49,15 @@
CONFIG_PROC_DEVICETREE=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
-CONFIG_TUN=y
CONFIG_MII=y
-CONFIG_MARVELL_PHY=y
-CONFIG_NET_ETHERNET=y
+CONFIG_TUN=y
CONFIG_UCC_GETH=y
-# CONFIG_NETDEV_10000 is not set
-CONFIG_WAN=y
-CONFIG_HDLC=y
+CONFIG_MARVELL_PHY=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=y
+CONFIG_WAN=y
+CONFIG_HDLC=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
@@ -77,10 +74,7 @@
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
deleted file mode 100644
index f7fdb03..0000000
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-CONFIG_PPC_85xx=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_SBC8560=y
-CONFIG_BINFMT_MISC=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_SECCOMP is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_NETDEVICES=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_GIANFAR=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_HW_RANDOM is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M48T59=y
-CONFIG_INOTIFY=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index 91db656..cbb98c1 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -23,7 +23,6 @@
# CONFIG_BLK_DEV_BSG is not set
CONFIG_P2041_RDB=y
CONFIG_P3041_DS=y
-CONFIG_P3060_QDS=y
CONFIG_P4080_DS=y
CONFIG_P5020_DS=y
CONFIG_HIGHMEM=y
@@ -32,10 +31,12 @@
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_FSL_LBC=y
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
# CONFIG_PCIEASPM is not set
CONFIG_RAPIDIO=y
CONFIG_FSL_RIO=y
@@ -76,6 +77,11 @@
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_MTD_M25P80=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
@@ -136,6 +142,8 @@
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_OF=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index 6798343..dd89de8 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -6,7 +6,9 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SPARSE_IRQ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -18,11 +20,14 @@
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
CONFIG_P5020_DS=y
# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_BINFMT_MISC=m
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
CONFIG_RAPIDIO=y
CONFIG_FSL_RIO=y
CONFIG_NET=y
@@ -51,12 +56,25 @@
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND_FSL_IFC=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=y
+CONFIG_ATA=y
+CONFIG_SATA_FSL=y
+CONFIG_SATA_SIL24=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_INPUT_FF_MEMLESS=m
@@ -66,39 +84,59 @@
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_FSL_SPI=y
+CONFIG_SPI_FSL_ESPI=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_HID=m
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
CONFIG_DMADEVICES=y
CONFIG_FSL_DMA=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_NLS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=m
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES=y
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 0d36b0e..8fa84f1 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -2,7 +2,6 @@
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_SPARSE_IRQ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -12,6 +11,7 @@
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
+CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_82xx=y
@@ -49,12 +49,9 @@
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
-CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
CONFIG_FS_ENET=y
CONFIG_FS_ENET_MDIO_FCC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_FIXED_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
@@ -64,6 +61,8 @@
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_CPM=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_SPI=y
# CONFIG_HWMON is not set
CONFIG_USB_GADGET=y
CONFIG_USB_FSL_USB2=y
@@ -80,8 +79,6 @@
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
@@ -90,7 +87,6 @@
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_BDI_SWITCH=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 62bb723..03ee911c 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -74,6 +74,30 @@
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_FTL=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_M25P80=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index d182842..fdfa84d 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -46,6 +46,7 @@
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
+CONFIG_IRQ_ALL_CPUS=y
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_PCI=y
CONFIG_PCI_MSI=y
@@ -76,6 +77,30 @@
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_FTL=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_M25P80=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index c1442a3..f2fe0c2 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -16,6 +16,7 @@
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
@@ -489,3 +490,4 @@
CONFIG_KVM_BOOK3S_64=m
CONFIG_KVM_BOOK3S_64_HV=y
CONFIG_VHOST_NET=m
+CONFIG_BPF_JIT=y
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 6608232..187fb8d 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -24,6 +24,7 @@
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h
index 5d7fbe1..6e82f5f 100644
--- a/arch/powerpc/include/asm/asm-compat.h
+++ b/arch/powerpc/include/asm/asm-compat.h
@@ -29,7 +29,7 @@
#define PPC_LLARX(t, a, b, eh) PPC_LDARX(t, a, b, eh)
#define PPC_STLCX stringify_in_c(stdcx.)
#define PPC_CNTLZL stringify_in_c(cntlzd)
-#define PPC_MTOCRF(FXM, RS) MTOCRF((FXM), (RS))
+#define PPC_MTOCRF(FXM, RS) MTOCRF((FXM), RS)
#define PPC_LR_STKOFF 16
#define PPC_MIN_STKFRM 112
#else /* 32-bit */
diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h
index 37c32aba..a6f8c7a 100644
--- a/arch/powerpc/include/asm/code-patching.h
+++ b/arch/powerpc/include/asm/code-patching.h
@@ -26,8 +26,8 @@
unsigned long target, int flags);
unsigned int create_cond_branch(const unsigned int *addr,
unsigned long target, int flags);
-void patch_branch(unsigned int *addr, unsigned long target, int flags);
-void patch_instruction(unsigned int *addr, unsigned int instr);
+int patch_branch(unsigned int *addr, unsigned long target, int flags);
+int patch_instruction(unsigned int *addr, unsigned int instr);
int instr_is_relative_branch(unsigned int instr);
int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr);
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 63d5ca4..77e97dd 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -34,6 +34,9 @@
#ifdef CONFIG_EEH
struct eeh_dev *edev;
#endif
+#ifdef CONFIG_FAIL_IOMMU
+ int fail_iommu;
+#endif
};
struct pdev_archdata {
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index d58fc4e..a43c147 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -293,7 +293,7 @@
#define RUNLATCH_ON \
BEGIN_FTR_SECTION \
- clrrdi r3,r1,THREAD_SHIFT; \
+ CURRENT_THREAD_INFO(r3, r1); \
ld r4,TI_LOCAL_FLAGS(r3); \
andi. r0,r4,_TLF_RUNLATCH; \
beql ppc64_runlatch_on_trampoline; \
@@ -332,7 +332,7 @@
#ifdef CONFIG_PPC_970_NAP
#define FINISH_NAP \
BEGIN_FTR_SECTION \
- clrrdi r11,r1,THREAD_SHIFT; \
+ CURRENT_THREAD_INFO(r11, r1); \
ld r9,TI_LOCAL_FLAGS(r11); \
andi. r10,r9,_TLF_NAPPING; \
bnel power4_fixup_nap; \
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index c9aac24..0554ab0 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -86,8 +86,8 @@
}
#ifdef CONFIG_PPC_BOOK3E
-#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory");
-#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory");
+#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory")
+#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory")
#else
#define __hard_irq_enable() __mtmsrd(local_paca->kernel_msr | MSR_EE, 1)
#define __hard_irq_disable() __mtmsrd(local_paca->kernel_msr, 1)
@@ -100,6 +100,14 @@
get_paca()->irq_happened |= PACA_IRQ_HARD_DIS;
}
+/* include/linux/interrupt.h needs hard_irq_disable to be a macro */
+#define hard_irq_disable hard_irq_disable
+
+static inline bool lazy_irq_pending(void)
+{
+ return !!(get_paca()->irq_happened & ~PACA_IRQ_HARD_DIS);
+}
+
/*
* This is called by asynchronous interrupts to conditionally
* re-enable hard interrupts when soft-disabled after having
@@ -117,6 +125,8 @@
return !regs->softe;
}
+extern bool prep_irq_for_idle(void);
+
#else /* CONFIG_PPC64 */
#define SET_MSR_EE(x) mtmsr(x)
diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h
index 0edb684..61e8490 100644
--- a/arch/powerpc/include/asm/immap_qe.h
+++ b/arch/powerpc/include/asm/immap_qe.h
@@ -26,7 +26,9 @@
struct qe_iram {
__be32 iadd; /* I-RAM Address Register */
__be32 idata; /* I-RAM Data Register */
- u8 res0[0x78];
+ u8 res0[0x04];
+ __be32 iready; /* I-RAM Ready Register */
+ u8 res1[0x70];
} __attribute__ ((packed));
/* QE Interrupt Controller */
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index a3855b8..f94ef42 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -20,6 +20,14 @@
#define _PNPWRP 0xa79
#define PNPBIOS_BASE 0xf000
+#if defined(CONFIG_PPC64) && defined(CONFIG_PCI)
+extern struct pci_dev *isa_bridge_pcidev;
+/*
+ * has legacy ISA devices ?
+ */
+#define arch_has_dev_port() (isa_bridge_pcidev != NULL)
+#endif
+
#include <linux/device.h>
#include <linux/io.h>
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index 957a83f..cbfe678 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -53,6 +53,16 @@
*/
#define IOMAP_MAX_ORDER 13
+#define IOMMU_POOL_HASHBITS 2
+#define IOMMU_NR_POOLS (1 << IOMMU_POOL_HASHBITS)
+
+struct iommu_pool {
+ unsigned long start;
+ unsigned long end;
+ unsigned long hint;
+ spinlock_t lock;
+} ____cacheline_aligned_in_smp;
+
struct iommu_table {
unsigned long it_busno; /* Bus number this table belongs to */
unsigned long it_size; /* Size of iommu table in entries */
@@ -61,10 +71,10 @@
unsigned long it_index; /* which iommu table this is */
unsigned long it_type; /* type: PCI or Virtual Bus */
unsigned long it_blocksize; /* Entries in each block (cacheline) */
- unsigned long it_hint; /* Hint for next alloc */
- unsigned long it_largehint; /* Hint for large allocs */
- unsigned long it_halfpoint; /* Breaking point for small/large allocs */
- spinlock_t it_lock; /* Protects it_map */
+ unsigned long poolsize;
+ unsigned long nr_pools;
+ struct iommu_pool large_pool;
+ struct iommu_pool pools[IOMMU_NR_POOLS];
unsigned long *it_map; /* A simple allocation bitmap for now */
};
diff --git a/arch/powerpc/include/asm/kvm_book3s_asm.h b/arch/powerpc/include/asm/kvm_book3s_asm.h
index 88609b2..bfcd00c 100644
--- a/arch/powerpc/include/asm/kvm_book3s_asm.h
+++ b/arch/powerpc/include/asm/kvm_book3s_asm.h
@@ -74,6 +74,7 @@
ulong vmhandler;
ulong scratch0;
ulong scratch1;
+ ulong sprg3;
u8 in_guest;
u8 restore_hid5;
u8 napping;
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index f014552..e8a26db 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -163,12 +163,7 @@
* to think about, feedback welcome. --BenH.
*/
-/* There are #define as they have to be used in assembly
- *
- * WARNING: If you change this list, make sure to update the array of
- * names currently in arch/powerpc/mm/hugetlbpage.c or bad things will
- * happen
- */
+/* These are #defines as they have to be used in assembly */
#define MMU_PAGE_4K 0
#define MMU_PAGE_16K 1
#define MMU_PAGE_64K 2
diff --git a/arch/powerpc/include/asm/perf_event.h b/arch/powerpc/include/asm/perf_event.h
index 5c16b89..0bb2372 100644
--- a/arch/powerpc/include/asm/perf_event.h
+++ b/arch/powerpc/include/asm/perf_event.h
@@ -26,8 +26,13 @@
#include <asm/ptrace.h>
#include <asm/reg.h>
+/*
+ * Overload regs->result to specify whether we should use the MSR (result
+ * is zero) or the SIAR (result is non zero).
+ */
#define perf_arch_fetch_caller_regs(regs, __ip) \
do { \
+ (regs)->result = 0; \
(regs)->nip = __ip; \
(regs)->gpr[1] = *(unsigned long *)__get_SP(); \
asm volatile("mfmsr %0" : "=r" ((regs)->msr)); \
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index d81f994..4c25319 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -15,6 +15,72 @@
#include <linux/stringify.h>
#include <asm/asm-compat.h>
+#define __REG_R0 0
+#define __REG_R1 1
+#define __REG_R2 2
+#define __REG_R3 3
+#define __REG_R4 4
+#define __REG_R5 5
+#define __REG_R6 6
+#define __REG_R7 7
+#define __REG_R8 8
+#define __REG_R9 9
+#define __REG_R10 10
+#define __REG_R11 11
+#define __REG_R12 12
+#define __REG_R13 13
+#define __REG_R14 14
+#define __REG_R15 15
+#define __REG_R16 16
+#define __REG_R17 17
+#define __REG_R18 18
+#define __REG_R19 19
+#define __REG_R20 20
+#define __REG_R21 21
+#define __REG_R22 22
+#define __REG_R23 23
+#define __REG_R24 24
+#define __REG_R25 25
+#define __REG_R26 26
+#define __REG_R27 27
+#define __REG_R28 28
+#define __REG_R29 29
+#define __REG_R30 30
+#define __REG_R31 31
+
+#define __REGA0_0 0
+#define __REGA0_R1 1
+#define __REGA0_R2 2
+#define __REGA0_R3 3
+#define __REGA0_R4 4
+#define __REGA0_R5 5
+#define __REGA0_R6 6
+#define __REGA0_R7 7
+#define __REGA0_R8 8
+#define __REGA0_R9 9
+#define __REGA0_R10 10
+#define __REGA0_R11 11
+#define __REGA0_R12 12
+#define __REGA0_R13 13
+#define __REGA0_R14 14
+#define __REGA0_R15 15
+#define __REGA0_R16 16
+#define __REGA0_R17 17
+#define __REGA0_R18 18
+#define __REGA0_R19 19
+#define __REGA0_R20 20
+#define __REGA0_R21 21
+#define __REGA0_R22 22
+#define __REGA0_R23 23
+#define __REGA0_R24 24
+#define __REGA0_R25 25
+#define __REGA0_R26 26
+#define __REGA0_R27 27
+#define __REGA0_R28 28
+#define __REGA0_R29 29
+#define __REGA0_R30 30
+#define __REGA0_R31 31
+
/* sorted alphabetically */
#define PPC_INST_DCBA 0x7c0005ec
#define PPC_INST_DCBA_MASK 0xfc0007fe
@@ -107,12 +173,19 @@
#define PPC_INST_NEG 0x7c0000d0
#define PPC_INST_BRANCH 0x48000000
#define PPC_INST_BRANCH_COND 0x40800000
+#define PPC_INST_LBZCIX 0x7c0006aa
+#define PPC_INST_STBCIX 0x7c0007aa
/* macros to insert fields into opcodes */
-#define __PPC_RA(a) (((a) & 0x1f) << 16)
-#define __PPC_RB(b) (((b) & 0x1f) << 11)
-#define __PPC_RS(s) (((s) & 0x1f) << 21)
-#define __PPC_RT(s) __PPC_RS(s)
+#define ___PPC_RA(a) (((a) & 0x1f) << 16)
+#define ___PPC_RB(b) (((b) & 0x1f) << 11)
+#define ___PPC_RS(s) (((s) & 0x1f) << 21)
+#define ___PPC_RT(t) ___PPC_RS(t)
+#define __PPC_RA(a) ___PPC_RA(__REG_##a)
+#define __PPC_RA0(a) ___PPC_RA(__REGA0_##a)
+#define __PPC_RB(b) ___PPC_RB(__REG_##b)
+#define __PPC_RS(s) ___PPC_RS(__REG_##s)
+#define __PPC_RT(t) ___PPC_RT(__REG_##t)
#define __PPC_XA(a) ((((a) & 0x1f) << 16) | (((a) & 0x20) >> 3))
#define __PPC_XB(b) ((((b) & 0x1f) << 11) | (((b) & 0x20) >> 4))
#define __PPC_XS(s) ((((s) & 0x1f) << 21) | (((s) & 0x20) >> 5))
@@ -141,13 +214,13 @@
#define PPC_DCBZL(a, b) stringify_in_c(.long PPC_INST_DCBZL | \
__PPC_RA(a) | __PPC_RB(b))
#define PPC_LDARX(t, a, b, eh) stringify_in_c(.long PPC_INST_LDARX | \
- __PPC_RT(t) | __PPC_RA(a) | \
- __PPC_RB(b) | __PPC_EH(eh))
+ ___PPC_RT(t) | ___PPC_RA(a) | \
+ ___PPC_RB(b) | __PPC_EH(eh))
#define PPC_LWARX(t, a, b, eh) stringify_in_c(.long PPC_INST_LWARX | \
- __PPC_RT(t) | __PPC_RA(a) | \
- __PPC_RB(b) | __PPC_EH(eh))
+ ___PPC_RT(t) | ___PPC_RA(a) | \
+ ___PPC_RB(b) | __PPC_EH(eh))
#define PPC_MSGSND(b) stringify_in_c(.long PPC_INST_MSGSND | \
- __PPC_RB(b))
+ ___PPC_RB(b))
#define PPC_POPCNTB(a, s) stringify_in_c(.long PPC_INST_POPCNTB | \
__PPC_RA(a) | __PPC_RS(s))
#define PPC_POPCNTD(a, s) stringify_in_c(.long PPC_INST_POPCNTD | \
@@ -158,34 +231,39 @@
#define PPC_RFDI stringify_in_c(.long PPC_INST_RFDI)
#define PPC_RFMCI stringify_in_c(.long PPC_INST_RFMCI)
#define PPC_TLBILX(t, a, b) stringify_in_c(.long PPC_INST_TLBILX | \
- __PPC_T_TLB(t) | __PPC_RA(a) | __PPC_RB(b))
+ __PPC_T_TLB(t) | __PPC_RA0(a) | __PPC_RB(b))
#define PPC_TLBILX_ALL(a, b) PPC_TLBILX(0, a, b)
#define PPC_TLBILX_PID(a, b) PPC_TLBILX(1, a, b)
#define PPC_TLBILX_VA(a, b) PPC_TLBILX(3, a, b)
#define PPC_WAIT(w) stringify_in_c(.long PPC_INST_WAIT | \
__PPC_WC(w))
#define PPC_TLBIE(lp,a) stringify_in_c(.long PPC_INST_TLBIE | \
- __PPC_RB(a) | __PPC_RS(lp))
+ ___PPC_RB(a) | ___PPC_RS(lp))
#define PPC_TLBSRX_DOT(a,b) stringify_in_c(.long PPC_INST_TLBSRX_DOT | \
- __PPC_RA(a) | __PPC_RB(b))
+ __PPC_RA0(a) | __PPC_RB(b))
#define PPC_TLBIVAX(a,b) stringify_in_c(.long PPC_INST_TLBIVAX | \
- __PPC_RA(a) | __PPC_RB(b))
+ __PPC_RA0(a) | __PPC_RB(b))
#define PPC_ERATWE(s, a, w) stringify_in_c(.long PPC_INST_ERATWE | \
__PPC_RS(s) | __PPC_RA(a) | __PPC_WS(w))
#define PPC_ERATRE(s, a, w) stringify_in_c(.long PPC_INST_ERATRE | \
__PPC_RS(s) | __PPC_RA(a) | __PPC_WS(w))
#define PPC_ERATILX(t, a, b) stringify_in_c(.long PPC_INST_ERATILX | \
- __PPC_T_TLB(t) | __PPC_RA(a) | \
+ __PPC_T_TLB(t) | __PPC_RA0(a) | \
__PPC_RB(b))
#define PPC_ERATIVAX(s, a, b) stringify_in_c(.long PPC_INST_ERATIVAX | \
- __PPC_RS(s) | __PPC_RA(a) | __PPC_RB(b))
+ __PPC_RS(s) | __PPC_RA0(a) | __PPC_RB(b))
#define PPC_ERATSX(t, a, w) stringify_in_c(.long PPC_INST_ERATSX | \
- __PPC_RS(t) | __PPC_RA(a) | __PPC_RB(b))
+ __PPC_RS(t) | __PPC_RA0(a) | __PPC_RB(b))
#define PPC_ERATSX_DOT(t, a, w) stringify_in_c(.long PPC_INST_ERATSX_DOT | \
- __PPC_RS(t) | __PPC_RA(a) | __PPC_RB(b))
+ __PPC_RS(t) | __PPC_RA0(a) | __PPC_RB(b))
#define PPC_SLBFEE_DOT(t, b) stringify_in_c(.long PPC_INST_SLBFEE | \
__PPC_RT(t) | __PPC_RB(b))
+/* PASemi instructions */
+#define LBZCIX(t,a,b) stringify_in_c(.long PPC_INST_LBZCIX | \
+ __PPC_RT(t) | __PPC_RA(a) | __PPC_RB(b))
+#define STBCIX(s,a,b) stringify_in_c(.long PPC_INST_STBCIX | \
+ __PPC_RS(s) | __PPC_RA(a) | __PPC_RB(b))
/*
* Define what the VSX XX1 form instructions will look like, then add
@@ -194,11 +272,11 @@
#define VSX_XX1(s, a, b) (__PPC_XS(s) | __PPC_RA(a) | __PPC_RB(b))
#define VSX_XX3(t, a, b) (__PPC_XT(t) | __PPC_XA(a) | __PPC_XB(b))
#define STXVD2X(s, a, b) stringify_in_c(.long PPC_INST_STXVD2X | \
- VSX_XX1((s), (a), (b)))
+ VSX_XX1((s), a, b))
#define LXVD2X(s, a, b) stringify_in_c(.long PPC_INST_LXVD2X | \
- VSX_XX1((s), (a), (b)))
+ VSX_XX1((s), a, b))
#define XXLOR(t, a, b) stringify_in_c(.long PPC_INST_XXLOR | \
- VSX_XX3((t), (a), (b)))
+ VSX_XX3((t), a, b))
#define PPC_NAP stringify_in_c(.long PPC_INST_NAP)
#define PPC_SLEEP stringify_in_c(.long PPC_INST_SLEEP)
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 1544420..ea2a86e 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -126,26 +126,26 @@
#define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
/* Save the lower 32 VSRs in the thread VSR region */
-#define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,base,b)
+#define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,R##base,R##b)
#define SAVE_2VSRS(n,b,base) SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
#define SAVE_4VSRS(n,b,base) SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
#define SAVE_8VSRS(n,b,base) SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
#define SAVE_16VSRS(n,b,base) SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
#define SAVE_32VSRS(n,b,base) SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
-#define REST_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); LXVD2X(n,base,b)
+#define REST_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); LXVD2X(n,R##base,R##b)
#define REST_2VSRS(n,b,base) REST_VSR(n,b,base); REST_VSR(n+1,b,base)
#define REST_4VSRS(n,b,base) REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
#define REST_8VSRS(n,b,base) REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
#define REST_16VSRS(n,b,base) REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
#define REST_32VSRS(n,b,base) REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */
-#define SAVE_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); STXVD2X(n+32,base,b)
+#define SAVE_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); STXVD2X(n+32,R##base,R##b)
#define SAVE_2VSRSU(n,b,base) SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base)
#define SAVE_4VSRSU(n,b,base) SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base)
#define SAVE_8VSRSU(n,b,base) SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base)
#define SAVE_16VSRSU(n,b,base) SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base)
#define SAVE_32VSRSU(n,b,base) SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base)
-#define REST_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,base,b)
+#define REST_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,R##base,R##b)
#define REST_2VSRSU(n,b,base) REST_VSRU(n,b,base); REST_VSRU(n+1,b,base)
#define REST_4VSRSU(n,b,base) REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base)
#define REST_8VSRSU(n,b,base) REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base)
@@ -178,9 +178,24 @@
#define HMT_HIGH or 3,3,3
#define HMT_EXTRA_HIGH or 7,7,7 # power7 only
+#ifdef CONFIG_PPC64
+#define ULONG_SIZE 8
+#else
+#define ULONG_SIZE 4
+#endif
+#define __VCPU_GPR(n) (VCPU_GPRS + (n * ULONG_SIZE))
+#define VCPU_GPR(n) __VCPU_GPR(__REG_##n)
+
#ifdef __KERNEL__
#ifdef CONFIG_PPC64
+#define STACKFRAMESIZE 256
+#define __STK_REG(i) (112 + ((i)-14)*8)
+#define STK_REG(i) __STK_REG(__REG_##i)
+
+#define __STK_PARAM(i) (48 + ((i)-3)*8)
+#define STK_PARAM(i) __STK_PARAM(__REG_##i)
+
#define XGLUE(a,b) a##b
#define GLUE(a,b) XGLUE(a,b)
@@ -295,14 +310,14 @@
*/
#ifdef __powerpc64__
#define LOAD_REG_IMMEDIATE(reg,expr) \
- lis (reg),(expr)@highest; \
- ori (reg),(reg),(expr)@higher; \
- rldicr (reg),(reg),32,31; \
- oris (reg),(reg),(expr)@h; \
- ori (reg),(reg),(expr)@l;
+ lis reg,(expr)@highest; \
+ ori reg,reg,(expr)@higher; \
+ rldicr reg,reg,32,31; \
+ oris reg,reg,(expr)@h; \
+ ori reg,reg,(expr)@l;
#define LOAD_REG_ADDR(reg,name) \
- ld (reg),name@got(r2)
+ ld reg,name@got(r2)
#define LOAD_REG_ADDRBASE(reg,name) LOAD_REG_ADDR(reg,name)
#define ADDROFF(name) 0
@@ -313,12 +328,12 @@
#else /* 32-bit */
#define LOAD_REG_IMMEDIATE(reg,expr) \
- lis (reg),(expr)@ha; \
- addi (reg),(reg),(expr)@l;
+ lis reg,(expr)@ha; \
+ addi reg,reg,(expr)@l;
#define LOAD_REG_ADDR(reg,name) LOAD_REG_IMMEDIATE(reg, name)
-#define LOAD_REG_ADDRBASE(reg, name) lis (reg),name@ha
+#define LOAD_REG_ADDRBASE(reg, name) lis reg,name@ha
#define ADDROFF(name) name@l
/* offsets for stack frame layout */
@@ -372,9 +387,9 @@
#ifdef CONFIG_PPC64
#define MTOCRF(FXM, RS) \
BEGIN_FTR_SECTION_NESTED(848); \
- mtcrf (FXM), (RS); \
+ mtcrf (FXM), RS; \
FTR_SECTION_ELSE_NESTED(848); \
- mtocrf (FXM), (RS); \
+ mtocrf (FXM), RS; \
ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_NOEXECUTE, 848)
#endif
@@ -463,6 +478,7 @@
#ifdef CONFIG_PPC_BOOK3S_64
#define RFI rfid
#define MTMSRD(r) mtmsrd r
+#define MTMSR_EERI(reg) mtmsrd reg,1
#else
#define FIX_SRR1(ra, rb)
#ifndef CONFIG_40x
@@ -471,6 +487,7 @@
#define RFI rfi; b . /* Prevent prefetch past rfi */
#endif
#define MTMSRD(r) mtmsr r
+#define MTMSR_EERI(reg) mtmsr reg
#define CLR_TOP32(r)
#endif
@@ -490,40 +507,46 @@
#define cr7 7
-/* General Purpose Registers (GPRs) */
+/*
+ * General Purpose Registers (GPRs)
+ *
+ * The lower case r0-r31 should be used in preference to the upper
+ * case R0-R31 as they provide more error checking in the assembler.
+ * Use R0-31 only when really nessesary.
+ */
-#define r0 0
-#define r1 1
-#define r2 2
-#define r3 3
-#define r4 4
-#define r5 5
-#define r6 6
-#define r7 7
-#define r8 8
-#define r9 9
-#define r10 10
-#define r11 11
-#define r12 12
-#define r13 13
-#define r14 14
-#define r15 15
-#define r16 16
-#define r17 17
-#define r18 18
-#define r19 19
-#define r20 20
-#define r21 21
-#define r22 22
-#define r23 23
-#define r24 24
-#define r25 25
-#define r26 26
-#define r27 27
-#define r28 28
-#define r29 29
-#define r30 30
-#define r31 31
+#define r0 %r0
+#define r1 %r1
+#define r2 %r2
+#define r3 %r3
+#define r4 %r4
+#define r5 %r5
+#define r6 %r6
+#define r7 %r7
+#define r8 %r8
+#define r9 %r9
+#define r10 %r10
+#define r11 %r11
+#define r12 %r12
+#define r13 %r13
+#define r14 %r14
+#define r15 %r15
+#define r16 %r16
+#define r17 %r17
+#define r18 %r18
+#define r19 %r19
+#define r20 %r20
+#define r21 %r21
+#define r22 %r22
+#define r23 %r23
+#define r24 %r24
+#define r25 %r25
+#define r26 %r26
+#define r27 %r27
+#define r28 %r28
+#define r29 %r29
+#define r30 %r30
+#define r31 %r31
/* Floating Point Registers (FPRs) */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 413a5ea..53b6dfa 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -389,10 +389,8 @@
#ifdef CONFIG_PSERIES_IDLE
extern void update_smt_snooze_delay(int snooze);
-extern int pseries_notify_cpuidle_add_cpu(int cpu);
#else
static inline void update_smt_snooze_delay(int snooze) {}
-static inline int pseries_notify_cpuidle_add_cpu(int cpu) { return 0; }
#endif
extern void flush_instruction_cache(void);
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index 5e0b6d5..229571a 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -499,6 +499,7 @@
/* I-RAM */
#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */
#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */
+#define QE_IRAM_READY 0x80000000 /* Ready */
/* UPC */
#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index f0cb7f4..6386086 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -491,6 +491,7 @@
#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */
#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */
#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */
+#define SPRN_USPRG3 0x103 /* SPRG3 userspace read */
#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */
#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */
#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */
@@ -753,14 +754,14 @@
* 64-bit server:
* - SPRG0 unused (reserved for HV on Power4)
* - SPRG2 scratch for exception vectors
- * - SPRG3 unused (user visible)
+ * - SPRG3 CPU and NUMA node for VDSO getcpu (user visible)
* - HSPRG0 stores PACA in HV mode
* - HSPRG1 scratch for "HV" exceptions
*
* 64-bit embedded
* - SPRG0 generic exception scratch
* - SPRG2 TLB exception stack
- * - SPRG3 unused (user visible)
+ * - SPRG3 CPU and NUMA node for VDSO getcpu (user visible)
* - SPRG4 unused (user visible)
* - SPRG6 TLB miss scratch (user visible, sorry !)
* - SPRG7 critical exception scratch
@@ -1024,7 +1025,8 @@
/* Macros for setting and retrieving special purpose registers */
#ifndef __ASSEMBLY__
#define mfmsr() ({unsigned long rval; \
- asm volatile("mfmsr %0" : "=r" (rval)); rval;})
+ asm volatile("mfmsr %0" : "=r" (rval) : \
+ : "memory"); rval;})
#ifdef CONFIG_PPC_BOOK3S_64
#define __mtmsrd(v, l) asm volatile("mtmsrd %0," __stringify(l) \
: : "r" (v) : "memory")
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 68831e9..faf9352 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -22,6 +22,12 @@
#define THREAD_SIZE (1 << THREAD_SHIFT)
+#ifdef CONFIG_PPC64
+#define CURRENT_THREAD_INFO(dest, sp) clrrdi dest, sp, THREAD_SHIFT
+#else
+#define CURRENT_THREAD_INFO(dest, sp) rlwinm dest, sp, 0, 0, 31-THREAD_SHIFT
+#endif
+
#ifndef __ASSEMBLY__
#include <linux/cache.h>
#include <asm/processor.h>
diff --git a/arch/powerpc/include/asm/trace.h b/arch/powerpc/include/asm/trace.h
index cbe2297..5712f06 100644
--- a/arch/powerpc/include/asm/trace.h
+++ b/arch/powerpc/include/asm/trace.h
@@ -8,7 +8,7 @@
struct pt_regs;
-TRACE_EVENT(irq_entry,
+DECLARE_EVENT_CLASS(ppc64_interrupt_class,
TP_PROTO(struct pt_regs *regs),
@@ -25,55 +25,32 @@
TP_printk("pt_regs=%p", __entry->regs)
);
-TRACE_EVENT(irq_exit,
+DEFINE_EVENT(ppc64_interrupt_class, irq_entry,
TP_PROTO(struct pt_regs *regs),
- TP_ARGS(regs),
-
- TP_STRUCT__entry(
- __field(struct pt_regs *, regs)
- ),
-
- TP_fast_assign(
- __entry->regs = regs;
- ),
-
- TP_printk("pt_regs=%p", __entry->regs)
+ TP_ARGS(regs)
);
-TRACE_EVENT(timer_interrupt_entry,
+DEFINE_EVENT(ppc64_interrupt_class, irq_exit,
TP_PROTO(struct pt_regs *regs),
- TP_ARGS(regs),
-
- TP_STRUCT__entry(
- __field(struct pt_regs *, regs)
- ),
-
- TP_fast_assign(
- __entry->regs = regs;
- ),
-
- TP_printk("pt_regs=%p", __entry->regs)
+ TP_ARGS(regs)
);
-TRACE_EVENT(timer_interrupt_exit,
+DEFINE_EVENT(ppc64_interrupt_class, timer_interrupt_entry,
TP_PROTO(struct pt_regs *regs),
- TP_ARGS(regs),
+ TP_ARGS(regs)
+);
- TP_STRUCT__entry(
- __field(struct pt_regs *, regs)
- ),
+DEFINE_EVENT(ppc64_interrupt_class, timer_interrupt_exit,
- TP_fast_assign(
- __entry->regs = regs;
- ),
+ TP_PROTO(struct pt_regs *regs),
- TP_printk("pt_regs=%p", __entry->regs)
+ TP_ARGS(regs)
);
#ifdef CONFIG_PPC_PSERIES
diff --git a/arch/powerpc/include/asm/vdso.h b/arch/powerpc/include/asm/vdso.h
index dc0419b..50f261b 100644
--- a/arch/powerpc/include/asm/vdso.h
+++ b/arch/powerpc/include/asm/vdso.h
@@ -22,6 +22,8 @@
extern unsigned long vdso32_sigtramp;
extern unsigned long vdso32_rt_sigtramp;
+int __cpuinit vdso_getcpu_init(void);
+
#else /* __ASSEMBLY__ */
#ifdef __VDSO64__
diff --git a/arch/powerpc/include/asm/vio.h b/arch/powerpc/include/asm/vio.h
index b19adf7..df81cb7 100644
--- a/arch/powerpc/include/asm/vio.h
+++ b/arch/powerpc/include/asm/vio.h
@@ -44,6 +44,8 @@
*/
#define VIO_CMO_MIN_ENT 1562624
+extern struct bus_type vio_bus_type;
+
struct iommu_table;
/*
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 52c7ad7..85b05c4 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -533,6 +533,7 @@
HSTATE_FIELD(HSTATE_VMHANDLER, vmhandler);
HSTATE_FIELD(HSTATE_SCRATCH0, scratch0);
HSTATE_FIELD(HSTATE_SCRATCH1, scratch1);
+ HSTATE_FIELD(HSTATE_SPRG3, sprg3);
HSTATE_FIELD(HSTATE_IN_GUEST, in_guest);
HSTATE_FIELD(HSTATE_RESTORE_HID5, restore_hid5);
HSTATE_FIELD(HSTATE_NAPPING, napping);
diff --git a/arch/powerpc/kernel/cpu_setup_a2.S b/arch/powerpc/kernel/cpu_setup_a2.S
index ebc62f4..61f079e 100644
--- a/arch/powerpc/kernel/cpu_setup_a2.S
+++ b/arch/powerpc/kernel/cpu_setup_a2.S
@@ -100,19 +100,19 @@
lis r4,(MMUCR0_TLBSEL_I|MMUCR0_ECL)@h
mtspr SPRN_MMUCR0, r4
li r4,A2_IERAT_SIZE-1
- PPC_ERATWE(r4,r4,3)
+ PPC_ERATWE(R4,R4,3)
/* Now set the D-ERAT watermark to 31 */
lis r4,(MMUCR0_TLBSEL_D|MMUCR0_ECL)@h
mtspr SPRN_MMUCR0, r4
li r4,A2_DERAT_SIZE-1
- PPC_ERATWE(r4,r4,3)
+ PPC_ERATWE(R4,R4,3)
/* And invalidate the beast just in case. That won't get rid of
* a bolted entry though it will be in LRU and so will go away eventually
* but let's not bother for now
*/
- PPC_ERATILX(0,0,0)
+ PPC_ERATILX(0,0,R0)
1:
blr
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index b1ec983..289be75 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -11,6 +11,8 @@
#include <linux/gfp.h>
#include <linux/memblock.h>
#include <linux/export.h>
+#include <linux/pci.h>
+#include <asm/vio.h>
#include <asm/bug.h>
#include <asm/abs_addr.h>
#include <asm/machdep.h>
@@ -205,7 +207,13 @@
static int __init dma_init(void)
{
- dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+ dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+#ifdef CONFIG_PCI
+ dma_debug_add_bus(&pci_bus_type);
+#endif
+#ifdef CONFIG_IBMVIO
+ dma_debug_add_bus(&vio_bus_type);
+#endif
return 0;
}
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index ba3aeb4..5207d5a 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -92,7 +92,7 @@
mfspr r8,SPRN_SPRG_THREAD
lwz r0,KSP_LIMIT(r8)
stw r0,SAVED_KSP_LIMIT(r11)
- rlwimi r0,r1,0,0,(31-THREAD_SHIFT)
+ CURRENT_THREAD_INFO(r0, r1)
stw r0,KSP_LIMIT(r8)
/* fall through */
#endif
@@ -112,7 +112,7 @@
mfspr r8,SPRN_SPRG_THREAD
lwz r0,KSP_LIMIT(r8)
stw r0,saved_ksp_limit@l(0)
- rlwimi r0,r1,0,0,(31-THREAD_SHIFT)
+ CURRENT_THREAD_INFO(r0, r1)
stw r0,KSP_LIMIT(r8)
/* fall through */
#endif
@@ -158,7 +158,7 @@
tophys(r11,r11)
addi r11,r11,global_dbcr0@l
#ifdef CONFIG_SMP
- rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
+ CURRENT_THREAD_INFO(r9, r1)
lwz r9,TI_CPU(r9)
slwi r9,r9,3
add r11,r11,r9
@@ -179,7 +179,7 @@
ble- stack_ovf /* then the kernel stack overflowed */
5:
#if defined(CONFIG_6xx) || defined(CONFIG_E500)
- rlwinm r9,r1,0,0,31-THREAD_SHIFT
+ CURRENT_THREAD_INFO(r9, r1)
tophys(r9,r9) /* check local flags */
lwz r12,TI_LOCAL_FLAGS(r9)
mtcrf 0x01,r12
@@ -226,13 +226,7 @@
stw r3,16(r1)
stw r4,20(r1)
stw r5,24(r1)
- andi. r12,r12,MSR_PR
- b 11f
bl trace_hardirqs_off
- b 12f
-11:
- bl trace_hardirqs_off
-12:
lwz r5,24(r1)
lwz r4,20(r1)
lwz r3,16(r1)
@@ -333,7 +327,7 @@
mtmsr r11
1:
#endif /* CONFIG_TRACE_IRQFLAGS */
- rlwinm r10,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
+ CURRENT_THREAD_INFO(r10, r1)
lwz r11,TI_FLAGS(r10)
andi. r11,r11,_TIF_SYSCALL_T_OR_A
bne- syscall_dotrace
@@ -354,7 +348,7 @@
bl do_show_syscall_exit
#endif
mr r6,r3
- rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
+ CURRENT_THREAD_INFO(r12, r1)
/* disable interrupts so current_thread_info()->flags can't change */
LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
/* Note: We don't bother telling lockdep about it */
@@ -815,7 +809,7 @@
user_exc_return: /* r10 contains MSR_KERNEL here */
/* Check current_thread_info()->flags */
- rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
+ CURRENT_THREAD_INFO(r9, r1)
lwz r9,TI_FLAGS(r9)
andi. r0,r9,_TIF_USER_WORK_MASK
bne do_work
@@ -835,7 +829,7 @@
/* N.B. the only way to get here is from the beq following ret_from_except. */
resume_kernel:
/* check current_thread_info->preempt_count */
- rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
+ CURRENT_THREAD_INFO(r9, r1)
lwz r0,TI_PREEMPT(r9)
cmpwi 0,r0,0 /* if non-zero, just restore regs and return */
bne restore
@@ -852,7 +846,7 @@
bl trace_hardirqs_off
#endif
1: bl preempt_schedule_irq
- rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
+ CURRENT_THREAD_INFO(r9, r1)
lwz r3,TI_FLAGS(r9)
andi. r0,r3,_TIF_NEED_RESCHED
bne- 1b
@@ -1122,7 +1116,7 @@
lwz r10,SAVED_KSP_LIMIT(r1)
stw r10,KSP_LIMIT(r9)
lwz r9,THREAD_INFO-THREAD(r9)
- rlwinm r10,r1,0,0,(31-THREAD_SHIFT)
+ CURRENT_THREAD_INFO(r10, r1)
lwz r10,TI_PREEMPT(r10)
stw r10,TI_PREEMPT(r9)
RESTORE_xSRR(SRR0,SRR1);
@@ -1156,7 +1150,7 @@
lis r11,global_dbcr0@ha
addi r11,r11,global_dbcr0@l
#ifdef CONFIG_SMP
- rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
+ CURRENT_THREAD_INFO(r9, r1)
lwz r9,TI_CPU(r9)
slwi r9,r9,3
add r11,r11,r9
@@ -1197,7 +1191,7 @@
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC
MTMSRD(r10) /* disable interrupts */
- rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
+ CURRENT_THREAD_INFO(r9, r1)
lwz r9,TI_FLAGS(r9)
andi. r0,r9,_TIF_NEED_RESCHED
bne- do_resched
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index ed1718f..4b01a25 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -146,7 +146,7 @@
REST_2GPRS(7,r1)
addi r9,r1,STACK_FRAME_OVERHEAD
#endif
- clrrdi r11,r1,THREAD_SHIFT
+ CURRENT_THREAD_INFO(r11, r1)
ld r10,TI_FLAGS(r11)
andi. r11,r10,_TIF_SYSCALL_T_OR_A
bne- syscall_dotrace
@@ -181,7 +181,7 @@
bl .do_show_syscall_exit
ld r3,RESULT(r1)
#endif
- clrrdi r12,r1,THREAD_SHIFT
+ CURRENT_THREAD_INFO(r12, r1)
ld r8,_MSR(r1)
#ifdef CONFIG_PPC_BOOK3S
@@ -197,7 +197,16 @@
wrteei 0
#else
ld r10,PACAKMSR(r13)
- mtmsrd r10,1
+ /*
+ * For performance reasons we clear RI the same time that we
+ * clear EE. We only need to clear RI just before we restore r13
+ * below, but batching it with EE saves us one expensive mtmsrd call.
+ * We have to be careful to restore RI if we branch anywhere from
+ * here (eg syscall_exit_work).
+ */
+ li r9,MSR_RI
+ andc r11,r10,r9
+ mtmsrd r11,1
#endif /* CONFIG_PPC_BOOK3E */
ld r9,TI_FLAGS(r12)
@@ -214,17 +223,6 @@
END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
andi. r6,r8,MSR_PR
ld r4,_LINK(r1)
- /*
- * Clear RI before restoring r13. If we are returning to
- * userspace and we take an exception after restoring r13,
- * we end up corrupting the userspace r13 value.
- */
-#ifdef CONFIG_PPC_BOOK3S
- /* No MSR:RI on BookE */
- li r12,MSR_RI
- andc r11,r10,r12
- mtmsrd r11,1 /* clear MSR.RI */
-#endif /* CONFIG_PPC_BOOK3S */
beq- 1f
ACCOUNT_CPU_USER_EXIT(r11, r12)
@@ -262,7 +260,7 @@
ld r7,GPR7(r1)
ld r8,GPR8(r1)
addi r9,r1,STACK_FRAME_OVERHEAD
- clrrdi r10,r1,THREAD_SHIFT
+ CURRENT_THREAD_INFO(r10, r1)
ld r10,TI_FLAGS(r10)
b .Lsyscall_dotrace_cont
@@ -271,6 +269,9 @@
b syscall_exit
syscall_exit_work:
+#ifdef CONFIG_PPC_BOOK3S
+ mtmsrd r10,1 /* Restore RI */
+#endif
/* If TIF_RESTOREALL is set, don't scribble on either r3 or ccr.
If TIF_NOERROR is set, just save r3 as it is. */
@@ -499,7 +500,7 @@
2:
#endif /* !CONFIG_PPC_BOOK3S */
- clrrdi r7,r8,THREAD_SHIFT /* base of new stack */
+ CURRENT_THREAD_INFO(r7, r8) /* base of new stack */
/* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
because we don't need to leave the 288-byte ABI gap at the
top of the kernel stack. */
@@ -558,27 +559,54 @@
mtmsrd r10,1 /* Update machine state */
#endif /* CONFIG_PPC_BOOK3E */
-#ifdef CONFIG_PREEMPT
- clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */
- li r0,_TIF_NEED_RESCHED /* bits to check */
+ CURRENT_THREAD_INFO(r9, r1)
ld r3,_MSR(r1)
ld r4,TI_FLAGS(r9)
- /* Move MSR_PR bit in r3 to _TIF_SIGPENDING position in r0 */
- rlwimi r0,r3,32+TIF_SIGPENDING-MSR_PR_LG,_TIF_SIGPENDING
- and. r0,r4,r0 /* check NEED_RESCHED and maybe SIGPENDING */
- bne do_work
-
-#else /* !CONFIG_PREEMPT */
- ld r3,_MSR(r1) /* Returning to user mode? */
andi. r3,r3,MSR_PR
- beq restore /* if not, just restore regs and return */
+ beq resume_kernel
/* Check current_thread_info()->flags */
- clrrdi r9,r1,THREAD_SHIFT
- ld r4,TI_FLAGS(r9)
andi. r0,r4,_TIF_USER_WORK_MASK
- bne do_work
-#endif /* !CONFIG_PREEMPT */
+ beq restore
+
+ andi. r0,r4,_TIF_NEED_RESCHED
+ beq 1f
+ bl .restore_interrupts
+ bl .schedule
+ b .ret_from_except_lite
+
+1: bl .save_nvgprs
+ bl .restore_interrupts
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .do_notify_resume
+ b .ret_from_except
+
+resume_kernel:
+#ifdef CONFIG_PREEMPT
+ /* Check if we need to preempt */
+ andi. r0,r4,_TIF_NEED_RESCHED
+ beq+ restore
+ /* Check that preempt_count() == 0 and interrupts are enabled */
+ lwz r8,TI_PREEMPT(r9)
+ cmpwi cr1,r8,0
+ ld r0,SOFTE(r1)
+ cmpdi r0,0
+ crandc eq,cr1*4+eq,eq
+ bne restore
+
+ /*
+ * Here we are preempting the current task. We want to make
+ * sure we are soft-disabled first
+ */
+ SOFT_DISABLE_INTS(r3,r4)
+1: bl .preempt_schedule_irq
+
+ /* Re-test flags and eventually loop */
+ CURRENT_THREAD_INFO(r9, r1)
+ ld r4,TI_FLAGS(r9)
+ andi. r0,r4,_TIF_NEED_RESCHED
+ bne 1b
+#endif /* CONFIG_PREEMPT */
.globl fast_exc_return_irq
fast_exc_return_irq:
@@ -759,50 +787,6 @@
#endif /* CONFIG_PPC_BOOK3E */
1: b .ret_from_except /* What else to do here ? */
-
-
-3:
-do_work:
-#ifdef CONFIG_PREEMPT
- andi. r0,r3,MSR_PR /* Returning to user mode? */
- bne user_work
- /* Check that preempt_count() == 0 and interrupts are enabled */
- lwz r8,TI_PREEMPT(r9)
- cmpwi cr1,r8,0
- ld r0,SOFTE(r1)
- cmpdi r0,0
- crandc eq,cr1*4+eq,eq
- bne restore
-
- /*
- * Here we are preempting the current task. We want to make
- * sure we are soft-disabled first
- */
- SOFT_DISABLE_INTS(r3,r4)
-1: bl .preempt_schedule_irq
-
- /* Re-test flags and eventually loop */
- clrrdi r9,r1,THREAD_SHIFT
- ld r4,TI_FLAGS(r9)
- andi. r0,r4,_TIF_NEED_RESCHED
- bne 1b
- b restore
-
-user_work:
-#endif /* CONFIG_PREEMPT */
-
- andi. r0,r4,_TIF_NEED_RESCHED
- beq 1f
- bl .restore_interrupts
- bl .schedule
- b .ret_from_except_lite
-
-1: bl .save_nvgprs
- bl .restore_interrupts
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_notify_resume
- b .ret_from_except
-
unrecov_restore:
addi r3,r1,STACK_FRAME_OVERHEAD
bl .unrecoverable_exception
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 7215cc2..98be7f0 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -222,7 +222,7 @@
* interrupts happen before the wait instruction.
*/
#define CHECK_NAPPING() \
- clrrdi r11,r1,THREAD_SHIFT; \
+ CURRENT_THREAD_INFO(r11, r1); \
ld r10,TI_LOCAL_FLAGS(r11); \
andi. r9,r10,_TLF_NAPPING; \
beq+ 1f; \
@@ -903,7 +903,7 @@
bne 1b /* If not, repeat */
/* Invalidate all TLBs */
- PPC_TLBILX_ALL(0,0)
+ PPC_TLBILX_ALL(0,R0)
sync
isync
@@ -961,7 +961,7 @@
tlbwe
/* Invalidate TLB1 */
- PPC_TLBILX_ALL(0,0)
+ PPC_TLBILX_ALL(0,R0)
sync
isync
@@ -1020,7 +1020,7 @@
tlbwe
/* Invalidate TLB1 */
- PPC_TLBILX_ALL(0,0)
+ PPC_TLBILX_ALL(0,R0)
sync
isync
@@ -1138,7 +1138,7 @@
tlbwe
#endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
- PPC_TLBILX(0,0,0)
+ PPC_TLBILX(0,0,R0)
sync
isync
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 1c06d29..e894515 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -239,6 +239,7 @@
* out of line to handle them
*/
. = 0xe00
+hv_exception_trampoline:
b h_data_storage_hv
. = 0xe20
b h_instr_storage_hv
@@ -851,7 +852,7 @@
bne- do_ste_alloc /* If so handle it */
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB)
- clrrdi r11,r1,THREAD_SHIFT
+ CURRENT_THREAD_INFO(r11, r1)
lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */
andis. r0,r0,NMI_MASK@h /* (i.e. an irq when soft-disabled) */
bne 77f /* then don't call hash_page now */
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index de36955..e0ada05 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -26,7 +26,7 @@
#include <asm/ptrace.h>
#ifdef CONFIG_VSX
-#define REST_32FPVSRS(n,c,base) \
+#define __REST_32FPVSRS(n,c,base) \
BEGIN_FTR_SECTION \
b 2f; \
END_FTR_SECTION_IFSET(CPU_FTR_VSX); \
@@ -35,7 +35,7 @@
2: REST_32VSRS(n,c,base); \
3:
-#define SAVE_32FPVSRS(n,c,base) \
+#define __SAVE_32FPVSRS(n,c,base) \
BEGIN_FTR_SECTION \
b 2f; \
END_FTR_SECTION_IFSET(CPU_FTR_VSX); \
@@ -44,9 +44,11 @@
2: SAVE_32VSRS(n,c,base); \
3:
#else
-#define REST_32FPVSRS(n,b,base) REST_32FPRS(n, base)
-#define SAVE_32FPVSRS(n,b,base) SAVE_32FPRS(n, base)
+#define __REST_32FPVSRS(n,b,base) REST_32FPRS(n, base)
+#define __SAVE_32FPVSRS(n,b,base) SAVE_32FPRS(n, base)
#endif
+#define REST_32FPVSRS(n,c,base) __REST_32FPVSRS(n,__REG_##c,__REG_##base)
+#define SAVE_32FPVSRS(n,c,base) __SAVE_32FPVSRS(n,__REG_##c,__REG_##base)
/*
* This task wants to use the FPU now.
@@ -79,7 +81,7 @@
beq 1f
toreal(r4)
addi r4,r4,THREAD /* want last_task_used_math->thread */
- SAVE_32FPVSRS(0, r5, r4)
+ SAVE_32FPVSRS(0, R5, R4)
mffs fr0
stfd fr0,THREAD_FPSCR(r4)
PPC_LL r5,PT_REGS(r4)
@@ -106,7 +108,7 @@
#endif
lfd fr0,THREAD_FPSCR(r5)
MTFSF_L(fr0)
- REST_32FPVSRS(0, r4, r5)
+ REST_32FPVSRS(0, R4, R5)
#ifndef CONFIG_SMP
subi r4,r5,THREAD
fromreal(r4)
@@ -140,7 +142,7 @@
addi r3,r3,THREAD /* want THREAD of task */
PPC_LL r5,PT_REGS(r3)
PPC_LCMPI 0,r5,0
- SAVE_32FPVSRS(0, r4 ,r3)
+ SAVE_32FPVSRS(0, R4 ,R3)
mffs fr0
stfd fr0,THREAD_FPSCR(r3)
beq 1f
diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index bf99cfa..91b46b7 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c
@@ -63,11 +63,9 @@
return -EINVAL;
/* replace the text with the new text */
- if (probe_kernel_write((void *)ip, &new, MCOUNT_INSN_SIZE))
+ if (patch_instruction((unsigned int *)ip, new))
return -EPERM;
- flush_icache_range(ip, ip + 8);
-
return 0;
}
@@ -212,12 +210,9 @@
*/
op = 0x48000008; /* b +8 */
- if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE))
+ if (patch_instruction((unsigned int *)ip, op))
return -EPERM;
-
- flush_icache_range(ip, ip + 8);
-
return 0;
}
@@ -245,9 +240,9 @@
/*
* On PPC32 the trampoline looks like:
- * 0x3d, 0x60, 0x00, 0x00 lis r11,sym@ha
- * 0x39, 0x6b, 0x00, 0x00 addi r11,r11,sym@l
- * 0x7d, 0x69, 0x03, 0xa6 mtctr r11
+ * 0x3d, 0x80, 0x00, 0x00 lis r12,sym@ha
+ * 0x39, 0x8c, 0x00, 0x00 addi r12,r12,sym@l
+ * 0x7d, 0x89, 0x03, 0xa6 mtctr r12
* 0x4e, 0x80, 0x04, 0x20 bctr
*/
@@ -262,9 +257,9 @@
pr_devel(" %08x %08x ", jmp[0], jmp[1]);
/* verify that this is what we expect it to be */
- if (((jmp[0] & 0xffff0000) != 0x3d600000) ||
- ((jmp[1] & 0xffff0000) != 0x396b0000) ||
- (jmp[2] != 0x7d6903a6) ||
+ if (((jmp[0] & 0xffff0000) != 0x3d800000) ||
+ ((jmp[1] & 0xffff0000) != 0x398c0000) ||
+ (jmp[2] != 0x7d8903a6) ||
(jmp[3] != 0x4e800420)) {
printk(KERN_ERR "Not a trampoline\n");
return -EINVAL;
@@ -286,11 +281,9 @@
op = PPC_INST_NOP;
- if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE))
+ if (patch_instruction((unsigned int *)ip, op))
return -EPERM;
- flush_icache_range(ip, ip + 8);
-
return 0;
}
#endif /* PPC64 */
@@ -426,11 +419,9 @@
pr_devel("write to %lx\n", rec->ip);
- if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE))
+ if (patch_instruction((unsigned int *)ip, op))
return -EPERM;
- flush_icache_range(ip, ip + 8);
-
return 0;
}
#endif /* CONFIG_PPC64 */
@@ -484,6 +475,58 @@
return ret;
}
+static int __ftrace_replace_code(struct dyn_ftrace *rec, int enable)
+{
+ unsigned long ftrace_addr = (unsigned long)FTRACE_ADDR;
+ int ret;
+
+ ret = ftrace_update_record(rec, enable);
+
+ switch (ret) {
+ case FTRACE_UPDATE_IGNORE:
+ return 0;
+ case FTRACE_UPDATE_MAKE_CALL:
+ return ftrace_make_call(rec, ftrace_addr);
+ case FTRACE_UPDATE_MAKE_NOP:
+ return ftrace_make_nop(NULL, rec, ftrace_addr);
+ }
+
+ return 0;
+}
+
+void ftrace_replace_code(int enable)
+{
+ struct ftrace_rec_iter *iter;
+ struct dyn_ftrace *rec;
+ int ret;
+
+ for (iter = ftrace_rec_iter_start(); iter;
+ iter = ftrace_rec_iter_next(iter)) {
+ rec = ftrace_rec_iter_record(iter);
+ ret = __ftrace_replace_code(rec, enable);
+ if (ret) {
+ ftrace_bug(ret, rec->ip);
+ return;
+ }
+ }
+}
+
+void arch_ftrace_update_code(int command)
+{
+ if (command & FTRACE_UPDATE_CALLS)
+ ftrace_replace_code(1);
+ else if (command & FTRACE_DISABLE_CALLS)
+ ftrace_replace_code(0);
+
+ if (command & FTRACE_UPDATE_TRACE_FUNC)
+ ftrace_update_ftrace_func(ftrace_trace_function);
+
+ if (command & FTRACE_START_FUNC_RET)
+ ftrace_enable_ftrace_graph_caller();
+ else if (command & FTRACE_STOP_FUNC_RET)
+ ftrace_disable_ftrace_graph_caller();
+}
+
int __init ftrace_dyn_arch_init(void *data)
{
/* caller expects data to be zero */
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 1f4434a..0f59863 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -192,7 +192,7 @@
li r0,0
stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
- rlwinm r22,r1,0,0,31-THREAD_SHIFT /* current thread_info */
+ CURRENT_THREAD_INFO(r22, r1)
stw r24, TI_CPU(r22)
bl early_init
@@ -556,8 +556,10 @@
/* SPE Unavailable */
START_EXCEPTION(SPEUnavailable)
NORMAL_EXCEPTION_PROLOG(SPE_UNAVAIL)
- bne load_up_spe
- addi r3,r1,STACK_FRAME_OVERHEAD
+ beq 1f
+ bl load_up_spe
+ b fast_exception_return
+1: addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE_LITE(0x2010, KernelSPE)
#else
EXCEPTION(0x2020, SPE_UNAVAIL, SPEUnavailable, \
@@ -778,7 +780,7 @@
/* Note that the SPE support is closely modeled after the AltiVec
* support. Changes to one are likely to be applicable to the
* other! */
-load_up_spe:
+_GLOBAL(load_up_spe)
/*
* Disable SPE for the task which had SPE previously,
* and save its SPE registers in its thread_struct.
@@ -826,20 +828,7 @@
subi r4,r5,THREAD
stw r4,last_task_used_spe@l(r3)
#endif /* !CONFIG_SMP */
- /* restore registers and return */
-2: REST_4GPRS(3, r11)
- lwz r10,_CCR(r11)
- REST_GPR(1, r11)
- mtcr r10
- lwz r10,_LINK(r11)
- mtlr r10
- REST_GPR(10, r11)
- mtspr SPRN_SRR1,r9
- mtspr SPRN_SRR0,r12
- REST_GPR(9, r11)
- REST_GPR(12, r11)
- lwz r11,GPR11(r11)
- rfi
+ blr
/*
* SPE unavailable trap from kernel - print a message, but let
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index 2bc0584..f3a82dd 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -111,7 +111,7 @@
* and the single_step_dabr_instruction(), then cleanup the breakpoint
* restoration variables to prevent dangling pointers.
*/
- if (bp->ctx->task)
+ if (bp->ctx && bp->ctx->task)
bp->ctx->task->thread.last_hit_ubp = NULL;
}
diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index 15c611d..1686916 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -135,7 +135,7 @@
DSSALL
sync
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
- rlwinm r9,r1,0,0,31-THREAD_SHIFT /* current thread_info */
+ CURRENT_THREAD_INFO(r9, r1)
lwz r8,TI_LOCAL_FLAGS(r9) /* set napping bit */
ori r8,r8,_TLF_NAPPING /* so when we take an exception */
stw r8,TI_LOCAL_FLAGS(r9) /* it will return to our caller */
@@ -158,7 +158,7 @@
stw r9,_NIP(r11) /* make it do a blr */
#ifdef CONFIG_SMP
- rlwinm r12,r11,0,0,31-THREAD_SHIFT
+ CURRENT_THREAD_INFO(r12, r11)
lwz r11,TI_CPU(r12) /* get cpu number * 4 */
slwi r11,r11,2
#else
diff --git a/arch/powerpc/kernel/idle_book3e.S b/arch/powerpc/kernel/idle_book3e.S
index ff007b5..4c7cb400 100644
--- a/arch/powerpc/kernel/idle_book3e.S
+++ b/arch/powerpc/kernel/idle_book3e.S
@@ -60,7 +60,7 @@
1: /* Let's set the _TLF_NAPPING flag so interrupts make us return
* to the right spot
*/
- clrrdi r11,r1,THREAD_SHIFT
+ CURRENT_THREAD_INFO(r11, r1)
ld r10,TI_LOCAL_FLAGS(r11)
ori r10,r10,_TLF_NAPPING
std r10,TI_LOCAL_FLAGS(r11)
diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S
index 4f0ab85..1544866 100644
--- a/arch/powerpc/kernel/idle_e500.S
+++ b/arch/powerpc/kernel/idle_e500.S
@@ -21,7 +21,7 @@
.text
_GLOBAL(e500_idle)
- rlwinm r3,r1,0,0,31-THREAD_SHIFT /* current thread_info */
+ CURRENT_THREAD_INFO(r3, r1)
lwz r4,TI_LOCAL_FLAGS(r3) /* set napping bit */
ori r4,r4,_TLF_NAPPING /* so when we take an exception */
stw r4,TI_LOCAL_FLAGS(r3) /* it will return to our caller */
@@ -96,7 +96,7 @@
stw r9,_NIP(r11) /* make it do a blr */
#ifdef CONFIG_SMP
- rlwinm r12,r1,0,0,31-THREAD_SHIFT
+ CURRENT_THREAD_INFO(r12, r1)
lwz r11,TI_CPU(r12) /* get cpu number * 4 */
slwi r11,r11,2
#else
diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S
index 2c71b0f..e3edaa1 100644
--- a/arch/powerpc/kernel/idle_power4.S
+++ b/arch/powerpc/kernel/idle_power4.S
@@ -59,7 +59,7 @@
DSSALL
sync
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
- clrrdi r9,r1,THREAD_SHIFT /* current thread_info */
+ CURRENT_THREAD_INFO(r9, r1)
ld r8,TI_LOCAL_FLAGS(r9) /* set napping bit */
ori r8,r8,_TLF_NAPPING /* so when we take an exception */
std r8,TI_LOCAL_FLAGS(r9) /* it will return to our caller */
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 359f078..ff5a6ce 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -33,6 +33,9 @@
#include <linux/bitmap.h>
#include <linux/iommu-helper.h>
#include <linux/crash_dump.h>
+#include <linux/hash.h>
+#include <linux/fault-inject.h>
+#include <linux/pci.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/iommu.h>
@@ -40,6 +43,7 @@
#include <asm/machdep.h>
#include <asm/kdump.h>
#include <asm/fadump.h>
+#include <asm/vio.h>
#define DBG(...)
@@ -58,6 +62,114 @@
__setup("iommu=", setup_iommu);
+static DEFINE_PER_CPU(unsigned int, iommu_pool_hash);
+
+/*
+ * We precalculate the hash to avoid doing it on every allocation.
+ *
+ * The hash is important to spread CPUs across all the pools. For example,
+ * on a POWER7 with 4 way SMT we want interrupts on the primary threads and
+ * with 4 pools all primary threads would map to the same pool.
+ */
+static int __init setup_iommu_pool_hash(void)
+{
+ unsigned int i;
+
+ for_each_possible_cpu(i)
+ per_cpu(iommu_pool_hash, i) = hash_32(i, IOMMU_POOL_HASHBITS);
+
+ return 0;
+}
+subsys_initcall(setup_iommu_pool_hash);
+
+#ifdef CONFIG_FAIL_IOMMU
+
+static DECLARE_FAULT_ATTR(fail_iommu);
+
+static int __init setup_fail_iommu(char *str)
+{
+ return setup_fault_attr(&fail_iommu, str);
+}
+__setup("fail_iommu=", setup_fail_iommu);
+
+static bool should_fail_iommu(struct device *dev)
+{
+ return dev->archdata.fail_iommu && should_fail(&fail_iommu, 1);
+}
+
+static int __init fail_iommu_debugfs(void)
+{
+ struct dentry *dir = fault_create_debugfs_attr("fail_iommu",
+ NULL, &fail_iommu);
+
+ return IS_ERR(dir) ? PTR_ERR(dir) : 0;
+}
+late_initcall(fail_iommu_debugfs);
+
+static ssize_t fail_iommu_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", dev->archdata.fail_iommu);
+}
+
+static ssize_t fail_iommu_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ int i;
+
+ if (count > 0 && sscanf(buf, "%d", &i) > 0)
+ dev->archdata.fail_iommu = (i == 0) ? 0 : 1;
+
+ return count;
+}
+
+static DEVICE_ATTR(fail_iommu, S_IRUGO|S_IWUSR, fail_iommu_show,
+ fail_iommu_store);
+
+static int fail_iommu_bus_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+
+ if (action == BUS_NOTIFY_ADD_DEVICE) {
+ if (device_create_file(dev, &dev_attr_fail_iommu))
+ pr_warn("Unable to create IOMMU fault injection sysfs "
+ "entries\n");
+ } else if (action == BUS_NOTIFY_DEL_DEVICE) {
+ device_remove_file(dev, &dev_attr_fail_iommu);
+ }
+
+ return 0;
+}
+
+static struct notifier_block fail_iommu_bus_notifier = {
+ .notifier_call = fail_iommu_bus_notify
+};
+
+static int __init fail_iommu_setup(void)
+{
+#ifdef CONFIG_PCI
+ bus_register_notifier(&pci_bus_type, &fail_iommu_bus_notifier);
+#endif
+#ifdef CONFIG_IBMVIO
+ bus_register_notifier(&vio_bus_type, &fail_iommu_bus_notifier);
+#endif
+
+ return 0;
+}
+/*
+ * Must execute after PCI and VIO subsystem have initialised but before
+ * devices are probed.
+ */
+arch_initcall(fail_iommu_setup);
+#else
+static inline bool should_fail_iommu(struct device *dev)
+{
+ return false;
+}
+#endif
+
static unsigned long iommu_range_alloc(struct device *dev,
struct iommu_table *tbl,
unsigned long npages,
@@ -71,6 +183,9 @@
int pass = 0;
unsigned long align_mask;
unsigned long boundary_size;
+ unsigned long flags;
+ unsigned int pool_nr;
+ struct iommu_pool *pool;
align_mask = 0xffffffffffffffffl >> (64 - align_order);
@@ -83,36 +198,49 @@
return DMA_ERROR_CODE;
}
- if (handle && *handle)
+ if (should_fail_iommu(dev))
+ return DMA_ERROR_CODE;
+
+ /*
+ * We don't need to disable preemption here because any CPU can
+ * safely use any IOMMU pool.
+ */
+ pool_nr = __raw_get_cpu_var(iommu_pool_hash) & (tbl->nr_pools - 1);
+
+ if (largealloc)
+ pool = &(tbl->large_pool);
+ else
+ pool = &(tbl->pools[pool_nr]);
+
+ spin_lock_irqsave(&(pool->lock), flags);
+
+again:
+ if ((pass == 0) && handle && *handle)
start = *handle;
else
- start = largealloc ? tbl->it_largehint : tbl->it_hint;
+ start = pool->hint;
- /* Use only half of the table for small allocs (15 pages or less) */
- limit = largealloc ? tbl->it_size : tbl->it_halfpoint;
-
- if (largealloc && start < tbl->it_halfpoint)
- start = tbl->it_halfpoint;
+ limit = pool->end;
/* The case below can happen if we have a small segment appended
* to a large, or when the previous alloc was at the very end of
* the available space. If so, go back to the initial start.
*/
if (start >= limit)
- start = largealloc ? tbl->it_largehint : tbl->it_hint;
-
- again:
+ start = pool->start;
if (limit + tbl->it_offset > mask) {
limit = mask - tbl->it_offset + 1;
/* If we're constrained on address range, first try
* at the masked hint to avoid O(n) search complexity,
- * but on second pass, start at 0.
+ * but on second pass, start at 0 in pool 0.
*/
- if ((start & mask) >= limit || pass > 0)
- start = 0;
- else
+ if ((start & mask) >= limit || pass > 0) {
+ pool = &(tbl->pools[0]);
+ start = pool->start;
+ } else {
start &= mask;
+ }
}
if (dev)
@@ -126,16 +254,25 @@
tbl->it_offset, boundary_size >> IOMMU_PAGE_SHIFT,
align_mask);
if (n == -1) {
- if (likely(pass < 2)) {
- /* First failure, just rescan the half of the table.
- * Second failure, rescan the other half of the table.
- */
- start = (largealloc ^ pass) ? tbl->it_halfpoint : 0;
- limit = pass ? tbl->it_size : limit;
+ if (likely(pass == 0)) {
+ /* First try the pool from the start */
+ pool->hint = pool->start;
pass++;
goto again;
+
+ } else if (pass <= tbl->nr_pools) {
+ /* Now try scanning all the other pools */
+ spin_unlock(&(pool->lock));
+ pool_nr = (pool_nr + 1) & (tbl->nr_pools - 1);
+ pool = &tbl->pools[pool_nr];
+ spin_lock(&(pool->lock));
+ pool->hint = pool->start;
+ pass++;
+ goto again;
+
} else {
- /* Third failure, give up */
+ /* Give up */
+ spin_unlock_irqrestore(&(pool->lock), flags);
return DMA_ERROR_CODE;
}
}
@@ -145,10 +282,10 @@
/* Bump the hint to a new block for small allocs. */
if (largealloc) {
/* Don't bump to new block to avoid fragmentation */
- tbl->it_largehint = end;
+ pool->hint = end;
} else {
/* Overflow will be taken care of at the next allocation */
- tbl->it_hint = (end + tbl->it_blocksize - 1) &
+ pool->hint = (end + tbl->it_blocksize - 1) &
~(tbl->it_blocksize - 1);
}
@@ -156,6 +293,8 @@
if (handle)
*handle = end;
+ spin_unlock_irqrestore(&(pool->lock), flags);
+
return n;
}
@@ -165,18 +304,14 @@
unsigned long mask, unsigned int align_order,
struct dma_attrs *attrs)
{
- unsigned long entry, flags;
+ unsigned long entry;
dma_addr_t ret = DMA_ERROR_CODE;
int build_fail;
- spin_lock_irqsave(&(tbl->it_lock), flags);
-
entry = iommu_range_alloc(dev, tbl, npages, NULL, mask, align_order);
- if (unlikely(entry == DMA_ERROR_CODE)) {
- spin_unlock_irqrestore(&(tbl->it_lock), flags);
+ if (unlikely(entry == DMA_ERROR_CODE))
return DMA_ERROR_CODE;
- }
entry += tbl->it_offset; /* Offset into real TCE table */
ret = entry << IOMMU_PAGE_SHIFT; /* Set the return dma address */
@@ -193,8 +328,6 @@
*/
if (unlikely(build_fail)) {
__iommu_free(tbl, ret, npages);
-
- spin_unlock_irqrestore(&(tbl->it_lock), flags);
return DMA_ERROR_CODE;
}
@@ -202,16 +335,14 @@
if (ppc_md.tce_flush)
ppc_md.tce_flush(tbl);
- spin_unlock_irqrestore(&(tbl->it_lock), flags);
-
/* Make sure updates are seen by hardware */
mb();
return ret;
}
-static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
- unsigned int npages)
+static bool iommu_free_check(struct iommu_table *tbl, dma_addr_t dma_addr,
+ unsigned int npages)
{
unsigned long entry, free_entry;
@@ -231,20 +362,57 @@
printk(KERN_INFO "\tindex = 0x%llx\n", (u64)tbl->it_index);
WARN_ON(1);
}
- return;
+
+ return false;
}
+ return true;
+}
+
+static struct iommu_pool *get_pool(struct iommu_table *tbl,
+ unsigned long entry)
+{
+ struct iommu_pool *p;
+ unsigned long largepool_start = tbl->large_pool.start;
+
+ /* The large pool is the last pool at the top of the table */
+ if (entry >= largepool_start) {
+ p = &tbl->large_pool;
+ } else {
+ unsigned int pool_nr = entry / tbl->poolsize;
+
+ BUG_ON(pool_nr > tbl->nr_pools);
+ p = &tbl->pools[pool_nr];
+ }
+
+ return p;
+}
+
+static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
+ unsigned int npages)
+{
+ unsigned long entry, free_entry;
+ unsigned long flags;
+ struct iommu_pool *pool;
+
+ entry = dma_addr >> IOMMU_PAGE_SHIFT;
+ free_entry = entry - tbl->it_offset;
+
+ pool = get_pool(tbl, free_entry);
+
+ if (!iommu_free_check(tbl, dma_addr, npages))
+ return;
+
ppc_md.tce_free(tbl, entry, npages);
+
+ spin_lock_irqsave(&(pool->lock), flags);
bitmap_clear(tbl->it_map, free_entry, npages);
+ spin_unlock_irqrestore(&(pool->lock), flags);
}
static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
unsigned int npages)
{
- unsigned long flags;
-
- spin_lock_irqsave(&(tbl->it_lock), flags);
-
__iommu_free(tbl, dma_addr, npages);
/* Make sure TLB cache is flushed if the HW needs it. We do
@@ -253,8 +421,6 @@
*/
if (ppc_md.tce_flush)
ppc_md.tce_flush(tbl);
-
- spin_unlock_irqrestore(&(tbl->it_lock), flags);
}
int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
@@ -263,7 +429,6 @@
struct dma_attrs *attrs)
{
dma_addr_t dma_next = 0, dma_addr;
- unsigned long flags;
struct scatterlist *s, *outs, *segstart;
int outcount, incount, i, build_fail = 0;
unsigned int align;
@@ -285,8 +450,6 @@
DBG("sg mapping %d elements:\n", nelems);
- spin_lock_irqsave(&(tbl->it_lock), flags);
-
max_seg_size = dma_get_max_seg_size(dev);
for_each_sg(sglist, s, nelems, i) {
unsigned long vaddr, npages, entry, slen;
@@ -369,8 +532,6 @@
if (ppc_md.tce_flush)
ppc_md.tce_flush(tbl);
- spin_unlock_irqrestore(&(tbl->it_lock), flags);
-
DBG("mapped %d elements:\n", outcount);
/* For the sake of iommu_unmap_sg, we clear out the length in the
@@ -402,7 +563,6 @@
if (s == outs)
break;
}
- spin_unlock_irqrestore(&(tbl->it_lock), flags);
return 0;
}
@@ -412,15 +572,12 @@
struct dma_attrs *attrs)
{
struct scatterlist *sg;
- unsigned long flags;
BUG_ON(direction == DMA_NONE);
if (!tbl)
return;
- spin_lock_irqsave(&(tbl->it_lock), flags);
-
sg = sglist;
while (nelems--) {
unsigned int npages;
@@ -440,8 +597,6 @@
*/
if (ppc_md.tce_flush)
ppc_md.tce_flush(tbl);
-
- spin_unlock_irqrestore(&(tbl->it_lock), flags);
}
static void iommu_table_clear(struct iommu_table *tbl)
@@ -494,9 +649,8 @@
unsigned long sz;
static int welcomed = 0;
struct page *page;
-
- /* Set aside 1/4 of the table for large allocations. */
- tbl->it_halfpoint = tbl->it_size * 3 / 4;
+ unsigned int i;
+ struct iommu_pool *p;
/* number of bytes needed for the bitmap */
sz = (tbl->it_size + 7) >> 3;
@@ -515,9 +669,28 @@
if (tbl->it_offset == 0)
set_bit(0, tbl->it_map);
- tbl->it_hint = 0;
- tbl->it_largehint = tbl->it_halfpoint;
- spin_lock_init(&tbl->it_lock);
+ /* We only split the IOMMU table if we have 1GB or more of space */
+ if ((tbl->it_size << IOMMU_PAGE_SHIFT) >= (1UL * 1024 * 1024 * 1024))
+ tbl->nr_pools = IOMMU_NR_POOLS;
+ else
+ tbl->nr_pools = 1;
+
+ /* We reserve the top 1/4 of the table for large allocations */
+ tbl->poolsize = (tbl->it_size * 3 / 4) / tbl->nr_pools;
+
+ for (i = 0; i < tbl->nr_pools; i++) {
+ p = &tbl->pools[i];
+ spin_lock_init(&(p->lock));
+ p->start = tbl->poolsize * i;
+ p->hint = p->start;
+ p->end = p->start + tbl->poolsize;
+ }
+
+ p = &tbl->large_pool;
+ spin_lock_init(&(p->lock));
+ p->start = tbl->poolsize * i;
+ p->hint = p->start;
+ p->end = tbl->it_size;
iommu_table_clear(tbl);
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 7835a5e..1f017bb 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -229,7 +229,7 @@
*/
if (unlikely(irq_happened != PACA_IRQ_HARD_DIS))
__hard_irq_disable();
-#ifdef CONFIG_TRACE_IRQFLAG
+#ifdef CONFIG_TRACE_IRQFLAGS
else {
/*
* We should already be hard disabled here. We had bugs
@@ -277,7 +277,7 @@
* NOTE: This is called with interrupts hard disabled but not marked
* as such in paca->irq_happened, so we need to resync this.
*/
-void restore_interrupts(void)
+void notrace restore_interrupts(void)
{
if (irqs_disabled()) {
local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
@@ -286,6 +286,52 @@
__hard_irq_enable();
}
+/*
+ * This is a helper to use when about to go into idle low-power
+ * when the latter has the side effect of re-enabling interrupts
+ * (such as calling H_CEDE under pHyp).
+ *
+ * You call this function with interrupts soft-disabled (this is
+ * already the case when ppc_md.power_save is called). The function
+ * will return whether to enter power save or just return.
+ *
+ * In the former case, it will have notified lockdep of interrupts
+ * being re-enabled and generally sanitized the lazy irq state,
+ * and in the latter case it will leave with interrupts hard
+ * disabled and marked as such, so the local_irq_enable() call
+ * in cpu_idle() will properly re-enable everything.
+ */
+bool prep_irq_for_idle(void)
+{
+ /*
+ * First we need to hard disable to ensure no interrupt
+ * occurs before we effectively enter the low power state
+ */
+ hard_irq_disable();
+
+ /*
+ * If anything happened while we were soft-disabled,
+ * we return now and do not enter the low power state.
+ */
+ if (lazy_irq_pending())
+ return false;
+
+ /* Tell lockdep we are about to re-enable */
+ trace_hardirqs_on();
+
+ /*
+ * Mark interrupts as soft-enabled and clear the
+ * PACA_IRQ_HARD_DIS from the pending mask since we
+ * are about to hard enable as well as a side effect
+ * of entering the low power state.
+ */
+ local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
+ local_paca->soft_enabled = 1;
+
+ /* Tell the caller to enter the low power state */
+ return true;
+}
+
#endif /* CONFIG_PPC64 */
int arch_show_interrupts(struct seq_file *p, int prec)
diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c
index 62bdf23..02c167db 100644
--- a/arch/powerpc/kernel/kvm.c
+++ b/arch/powerpc/kernel/kvm.c
@@ -302,7 +302,7 @@
if (imm_one) {
p[kvm_emulate_wrtee_reg_offs] =
- KVM_INST_LI | __PPC_RT(30) | MSR_EE;
+ KVM_INST_LI | __PPC_RT(R30) | MSR_EE;
} else {
/* Make clobbered registers work too */
switch (get_rt(rt)) {
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 386d57f..407e293 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -179,7 +179,7 @@
mtspr SPRN_HID1,r4
/* Store new HID1 image */
- rlwinm r6,r1,0,0,(31-THREAD_SHIFT)
+ CURRENT_THREAD_INFO(r6, r1)
lwz r6,TI_CPU(r6)
slwi r6,r6,2
addis r6,r6,nap_save_hid1@ha
@@ -699,7 +699,7 @@
#ifdef CONFIG_SMP
_GLOBAL(start_secondary_resume)
/* Reset stack */
- rlwinm r1,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
+ CURRENT_THREAD_INFO(r1, r1)
addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
li r3,0
stw r3,0(r1) /* Zero the stack frame pointer */
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 616921e..565b786 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -301,11 +301,6 @@
#ifdef CONFIG_PPC_PASEMI
-/* No support in all binutils for these yet, so use defines */
-#define LBZCIX(RT,RA,RB) .long (0x7c0006aa|(RT<<21)|(RA<<16)|(RB << 11))
-#define STBCIX(RS,RA,RB) .long (0x7c0007aa|(RS<<21)|(RA<<16)|(RB << 11))
-
-
_GLOBAL(real_205_readb)
mfmsr r7
ori r0,r7,MSR_DR
@@ -314,7 +309,7 @@
mtmsrd r0
sync
isync
- LBZCIX(r3,0,r3)
+ LBZCIX(R3,R0,R3)
isync
mtmsrd r7
sync
@@ -329,7 +324,7 @@
mtmsrd r0
sync
isync
- STBCIX(r3,0,r4)
+ STBCIX(R3,R0,R4)
isync
mtmsrd r7
sync
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 8e78e93..0f75bd5 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1646,7 +1646,6 @@
pci_free_resource_list(&resources);
return;
}
- bus->secondary = hose->first_busno;
hose->bus = bus;
/* Get probe mode and perform scan */
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 89dde17..d7dd42b 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -198,7 +198,6 @@
/**
* of_scan_pci_bridge - Set up a PCI bridge and scan for child nodes
- * @node: device tree node of bridge
* @dev: pci_dev structure for the bridge
*
* of_scan_bus() calls this routine for each PCI bridge that it finds, and
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 1b488e5..0794a30 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1312,7 +1312,7 @@
extern char opal_secondary_entry;
-static void prom_query_opal(void)
+static void __init prom_query_opal(void)
{
long rc;
@@ -1436,7 +1436,7 @@
prom_debug("prom_opal_hold_cpus: end...\n");
}
-static void prom_opal_takeover(void)
+static void __init prom_opal_takeover(void)
{
struct opal_secondary_data *data = &RELOC(opal_secondary_data);
struct opal_takeover_args *args = &data->args;
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index afd4f05..bdc499c 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -720,6 +720,33 @@
arch_initcall(powerpc_debugfs_init);
#endif
+#ifdef CONFIG_BOOKE_WDT
+extern u32 booke_wdt_enabled;
+extern u32 booke_wdt_period;
+
+/* Checks wdt=x and wdt_period=xx command-line option */
+notrace int __init early_parse_wdt(char *p)
+{
+ if (p && strncmp(p, "0", 1) != 0)
+ booke_wdt_enabled = 1;
+
+ return 0;
+}
+early_param("wdt", early_parse_wdt);
+
+int __init early_parse_wdt_period(char *p)
+{
+ unsigned long ret;
+ if (p) {
+ if (!kstrtol(p, 0, &ret))
+ booke_wdt_period = ret;
+ }
+
+ return 0;
+}
+early_param("wdt_period", early_parse_wdt_period);
+#endif /* CONFIG_BOOKE_WDT */
+
void ppc_printk_progress(char *s, unsigned short hex)
{
pr_info("%s\n", s);
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index ec8a53f..a8f54ec 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -149,30 +149,6 @@
ppc_md.progress("id mach(): done", 0x200);
}
-#ifdef CONFIG_BOOKE_WDT
-extern u32 booke_wdt_enabled;
-extern u32 booke_wdt_period;
-
-/* Checks wdt=x and wdt_period=xx command-line option */
-notrace int __init early_parse_wdt(char *p)
-{
- if (p && strncmp(p, "0", 1) != 0)
- booke_wdt_enabled = 1;
-
- return 0;
-}
-early_param("wdt", early_parse_wdt);
-
-int __init early_parse_wdt_period (char *p)
-{
- if (p)
- booke_wdt_period = simple_strtoul(p, NULL, 0);
-
- return 0;
-}
-early_param("wdt_period", early_parse_wdt_period);
-#endif /* CONFIG_BOOKE_WDT */
-
/* Checks "l2cr=xxxx" command-line option */
int __init ppc_setup_l2cr(char *str)
{
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index e4cb343..0321007 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -48,6 +48,7 @@
#ifdef CONFIG_PPC64
#include <asm/paca.h>
#endif
+#include <asm/vdso.h>
#include <asm/debug.h>
#ifdef DEBUG
@@ -570,8 +571,9 @@
#ifdef CONFIG_PPC64
if (system_state == SYSTEM_RUNNING)
vdso_data->processorCount++;
+
+ vdso_getcpu_init();
#endif
- ipi_call_lock();
notify_cpu_starting(cpu);
set_cpu_online(cpu, true);
/* Update sibling maps */
@@ -601,7 +603,6 @@
of_node_put(np);
}
of_node_put(l2_cache);
- ipi_call_unlock();
local_irq_enable();
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 9eb5b9b..b67db22 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -706,6 +706,34 @@
}
}
+#ifdef CONFIG_PPC64
+int __cpuinit vdso_getcpu_init(void)
+{
+ unsigned long cpu, node, val;
+
+ /*
+ * SPRG3 contains the CPU in the bottom 16 bits and the NUMA node in
+ * the next 16 bits. The VDSO uses this to implement getcpu().
+ */
+ cpu = get_cpu();
+ WARN_ON_ONCE(cpu > 0xffff);
+
+ node = cpu_to_node(cpu);
+ WARN_ON_ONCE(node > 0xffff);
+
+ val = (cpu & 0xfff) | ((node & 0xffff) << 16);
+ mtspr(SPRN_SPRG3, val);
+#ifdef CONFIG_KVM_BOOK3S_HANDLER
+ get_paca()->kvm_hstate.sprg3 = val;
+#endif
+
+ put_cpu();
+
+ return 0;
+}
+/* We need to call this before SMP init */
+early_initcall(vdso_getcpu_init);
+#endif
static int __init vdso_init(void)
{
diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile
index 9a7946c..53e6c9b 100644
--- a/arch/powerpc/kernel/vdso32/Makefile
+++ b/arch/powerpc/kernel/vdso32/Makefile
@@ -1,7 +1,9 @@
# List of files in the vdso, has to be asm only for now
-obj-vdso32 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o
+obj-vdso32-$(CONFIG_PPC64) = getcpu.o
+obj-vdso32 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o \
+ $(obj-vdso32-y)
# Build rules
diff --git a/arch/powerpc/kernel/vdso32/getcpu.S b/arch/powerpc/kernel/vdso32/getcpu.S
new file mode 100644
index 0000000..47afd08
--- /dev/null
+++ b/arch/powerpc/kernel/vdso32/getcpu.S
@@ -0,0 +1,45 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2012
+ *
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ */
+#include <asm/ppc_asm.h>
+#include <asm/vdso.h>
+
+ .text
+/*
+ * Exact prototype of getcpu
+ *
+ * int __kernel_getcpu(unsigned *cpu, unsigned *node);
+ *
+ */
+V_FUNCTION_BEGIN(__kernel_getcpu)
+ .cfi_startproc
+ mfspr r5,SPRN_USPRG3
+ cmpdi cr0,r3,0
+ cmpdi cr1,r4,0
+ clrlwi r6,r5,16
+ rlwinm r7,r5,16,31-15,31-0
+ beq cr0,1f
+ stw r6,0(r3)
+1: beq cr1,2f
+ stw r7,0(r4)
+2: crclr cr0*4+so
+ li r3,0 /* always success */
+ blr
+ .cfi_endproc
+V_FUNCTION_END(__kernel_getcpu)
diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S
index 0546bcd..43200ba 100644
--- a/arch/powerpc/kernel/vdso32/vdso32.lds.S
+++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S
@@ -147,6 +147,9 @@
__kernel_sync_dicache_p5;
__kernel_sigtramp32;
__kernel_sigtramp_rt32;
+#ifdef CONFIG_PPC64
+ __kernel_getcpu;
+#endif
local: *;
};
diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile
index 8c500d8..effca94 100644
--- a/arch/powerpc/kernel/vdso64/Makefile
+++ b/arch/powerpc/kernel/vdso64/Makefile
@@ -1,6 +1,6 @@
# List of files in the vdso, has to be asm only for now
-obj-vdso64 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o
+obj-vdso64 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o getcpu.o
# Build rules
diff --git a/arch/powerpc/kernel/vdso64/getcpu.S b/arch/powerpc/kernel/vdso64/getcpu.S
new file mode 100644
index 0000000..47afd08
--- /dev/null
+++ b/arch/powerpc/kernel/vdso64/getcpu.S
@@ -0,0 +1,45 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2012
+ *
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ */
+#include <asm/ppc_asm.h>
+#include <asm/vdso.h>
+
+ .text
+/*
+ * Exact prototype of getcpu
+ *
+ * int __kernel_getcpu(unsigned *cpu, unsigned *node);
+ *
+ */
+V_FUNCTION_BEGIN(__kernel_getcpu)
+ .cfi_startproc
+ mfspr r5,SPRN_USPRG3
+ cmpdi cr0,r3,0
+ cmpdi cr1,r4,0
+ clrlwi r6,r5,16
+ rlwinm r7,r5,16,31-15,31-0
+ beq cr0,1f
+ stw r6,0(r3)
+1: beq cr1,2f
+ stw r7,0(r4)
+2: crclr cr0*4+so
+ li r3,0 /* always success */
+ blr
+ .cfi_endproc
+V_FUNCTION_END(__kernel_getcpu)
diff --git a/arch/powerpc/kernel/vdso64/vdso64.lds.S b/arch/powerpc/kernel/vdso64/vdso64.lds.S
index 0e61540..e6c1758 100644
--- a/arch/powerpc/kernel/vdso64/vdso64.lds.S
+++ b/arch/powerpc/kernel/vdso64/vdso64.lds.S
@@ -146,6 +146,7 @@
__kernel_sync_dicache;
__kernel_sync_dicache_p5;
__kernel_sigtramp_rt64;
+ __kernel_getcpu;
local: *;
};
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index cb87301..7a421e8 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -37,8 +37,6 @@
#include <asm/page.h>
#include <asm/hvcall.h>
-static struct bus_type vio_bus_type;
-
static struct vio_dev vio_bus_device = { /* fake "parent" device */
.name = "vio",
.type = "",
@@ -625,7 +623,7 @@
* vio_cmo_set_dev_desired - Set desired entitlement for a device
*
* @viodev: struct vio_dev for device to alter
- * @new_desired: new desired entitlement level in bytes
+ * @desired: new desired entitlement level in bytes
*
* For use by devices to request a change to their entitlement at runtime or
* through sysfs. The desired entitlement level is changed and a balancing
@@ -1262,7 +1260,7 @@
/**
* vio_register_driver: - Register a new vio driver
- * @drv: The vio_driver structure to be registered.
+ * @viodrv: The vio_driver structure to be registered.
*/
int __vio_register_driver(struct vio_driver *viodrv, struct module *owner,
const char *mod_name)
@@ -1282,7 +1280,7 @@
/**
* vio_unregister_driver - Remove registration of vio driver.
- * @driver: The vio_driver struct to be removed form registration
+ * @viodrv: The vio_driver struct to be removed form registration
*/
void vio_unregister_driver(struct vio_driver *viodrv)
{
@@ -1397,21 +1395,27 @@
viodev->name = of_node->name;
viodev->dev.of_node = of_node_get(of_node);
- if (firmware_has_feature(FW_FEATURE_CMO))
- vio_cmo_set_dma_ops(viodev);
- else
- set_dma_ops(&viodev->dev, &dma_iommu_ops);
- set_iommu_table_base(&viodev->dev, vio_build_iommu_table(viodev));
set_dev_node(&viodev->dev, of_node_to_nid(of_node));
/* init generic 'struct device' fields: */
viodev->dev.parent = &vio_bus_device.dev;
viodev->dev.bus = &vio_bus_type;
viodev->dev.release = vio_dev_release;
- /* needed to ensure proper operation of coherent allocations
- * later, in case driver doesn't set it explicitly */
- dma_set_mask(&viodev->dev, DMA_BIT_MASK(64));
- dma_set_coherent_mask(&viodev->dev, DMA_BIT_MASK(64));
+
+ if (of_get_property(viodev->dev.of_node, "ibm,my-dma-window", NULL)) {
+ if (firmware_has_feature(FW_FEATURE_CMO))
+ vio_cmo_set_dma_ops(viodev);
+ else
+ set_dma_ops(&viodev->dev, &dma_iommu_ops);
+
+ set_iommu_table_base(&viodev->dev,
+ vio_build_iommu_table(viodev));
+
+ /* needed to ensure proper operation of coherent allocations
+ * later, in case driver doesn't set it explicitly */
+ dma_set_mask(&viodev->dev, DMA_BIT_MASK(64));
+ dma_set_coherent_mask(&viodev->dev, DMA_BIT_MASK(64));
+ }
/* register with generic device framework */
if (device_register(&viodev->dev)) {
@@ -1491,12 +1495,18 @@
if (firmware_has_feature(FW_FEATURE_CMO))
vio_cmo_bus_init();
+ return 0;
+}
+postcore_initcall(vio_bus_init);
+
+static int __init vio_device_init(void)
+{
vio_bus_scan_register_devices("vdevice");
vio_bus_scan_register_devices("ibm,platform-facilities");
return 0;
}
-__initcall(vio_bus_init);
+device_initcall(vio_device_init);
static ssize_t name_show(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -1568,7 +1578,7 @@
return 0;
}
-static struct bus_type vio_bus_type = {
+struct bus_type vio_bus_type = {
.name = "vio",
.dev_attrs = vio_dev_attrs,
.uevent = vio_hotplug,
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index c6af1d6..3abe1b86 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -268,24 +268,45 @@
return err;
}
-static void kvmppc_update_vpa(struct kvm *kvm, struct kvmppc_vpa *vpap)
+static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap)
{
+ struct kvm *kvm = vcpu->kvm;
void *va;
unsigned long nb;
+ unsigned long gpa;
+
+ /*
+ * We need to pin the page pointed to by vpap->next_gpa,
+ * but we can't call kvmppc_pin_guest_page under the lock
+ * as it does get_user_pages() and down_read(). So we
+ * have to drop the lock, pin the page, then get the lock
+ * again and check that a new area didn't get registered
+ * in the meantime.
+ */
+ for (;;) {
+ gpa = vpap->next_gpa;
+ spin_unlock(&vcpu->arch.vpa_update_lock);
+ va = NULL;
+ nb = 0;
+ if (gpa)
+ va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb);
+ spin_lock(&vcpu->arch.vpa_update_lock);
+ if (gpa == vpap->next_gpa)
+ break;
+ /* sigh... unpin that one and try again */
+ if (va)
+ kvmppc_unpin_guest_page(kvm, va);
+ }
vpap->update_pending = 0;
- va = NULL;
- if (vpap->next_gpa) {
- va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb);
- if (nb < vpap->len) {
- /*
- * If it's now too short, it must be that userspace
- * has changed the mappings underlying guest memory,
- * so unregister the region.
- */
- kvmppc_unpin_guest_page(kvm, va);
- va = NULL;
- }
+ if (va && nb < vpap->len) {
+ /*
+ * If it's now too short, it must be that userspace
+ * has changed the mappings underlying guest memory,
+ * so unregister the region.
+ */
+ kvmppc_unpin_guest_page(kvm, va);
+ va = NULL;
}
if (vpap->pinned_addr)
kvmppc_unpin_guest_page(kvm, vpap->pinned_addr);
@@ -296,20 +317,18 @@
static void kvmppc_update_vpas(struct kvm_vcpu *vcpu)
{
- struct kvm *kvm = vcpu->kvm;
-
spin_lock(&vcpu->arch.vpa_update_lock);
if (vcpu->arch.vpa.update_pending) {
- kvmppc_update_vpa(kvm, &vcpu->arch.vpa);
+ kvmppc_update_vpa(vcpu, &vcpu->arch.vpa);
init_vpa(vcpu, vcpu->arch.vpa.pinned_addr);
}
if (vcpu->arch.dtl.update_pending) {
- kvmppc_update_vpa(kvm, &vcpu->arch.dtl);
+ kvmppc_update_vpa(vcpu, &vcpu->arch.dtl);
vcpu->arch.dtl_ptr = vcpu->arch.dtl.pinned_addr;
vcpu->arch.dtl_index = 0;
}
if (vcpu->arch.slb_shadow.update_pending)
- kvmppc_update_vpa(kvm, &vcpu->arch.slb_shadow);
+ kvmppc_update_vpa(vcpu, &vcpu->arch.slb_shadow);
spin_unlock(&vcpu->arch.vpa_update_lock);
}
@@ -800,12 +819,39 @@
struct kvm_vcpu *vcpu, *vcpu0, *vnext;
long ret;
u64 now;
- int ptid, i;
+ int ptid, i, need_vpa_update;
/* don't start if any threads have a signal pending */
- list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
+ need_vpa_update = 0;
+ list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
if (signal_pending(vcpu->arch.run_task))
return 0;
+ need_vpa_update |= vcpu->arch.vpa.update_pending |
+ vcpu->arch.slb_shadow.update_pending |
+ vcpu->arch.dtl.update_pending;
+ }
+
+ /*
+ * Initialize *vc, in particular vc->vcore_state, so we can
+ * drop the vcore lock if necessary.
+ */
+ vc->n_woken = 0;
+ vc->nap_count = 0;
+ vc->entry_exit_count = 0;
+ vc->vcore_state = VCORE_RUNNING;
+ vc->in_guest = 0;
+ vc->napping_threads = 0;
+
+ /*
+ * Updating any of the vpas requires calling kvmppc_pin_guest_page,
+ * which can't be called with any spinlocks held.
+ */
+ if (need_vpa_update) {
+ spin_unlock(&vc->lock);
+ list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
+ kvmppc_update_vpas(vcpu);
+ spin_lock(&vc->lock);
+ }
/*
* Make sure we are running on thread 0, and that
@@ -838,20 +884,10 @@
if (vcpu->arch.ceded)
vcpu->arch.ptid = ptid++;
- vc->n_woken = 0;
- vc->nap_count = 0;
- vc->entry_exit_count = 0;
- vc->vcore_state = VCORE_RUNNING;
vc->stolen_tb += mftb() - vc->preempt_tb;
- vc->in_guest = 0;
vc->pcpu = smp_processor_id();
- vc->napping_threads = 0;
list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
kvmppc_start_thread(vcpu);
- if (vcpu->arch.vpa.update_pending ||
- vcpu->arch.slb_shadow.update_pending ||
- vcpu->arch.dtl.update_pending)
- kvmppc_update_vpas(vcpu);
kvmppc_create_dtl_entry(vcpu, vc);
}
/* Grab any remaining hw threads so they can't go into the kernel */
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index a84aafc..5a84c8d 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -72,9 +72,6 @@
mtsrr1 r6
RFI
-#define ULONG_SIZE 8
-#define VCPU_GPR(n) (VCPU_GPRS + (n * ULONG_SIZE))
-
/******************************************************************************
* *
* Entry code *
@@ -206,24 +203,24 @@
/* Load up FP, VMX and VSX registers */
bl kvmppc_load_fp
- ld r14, VCPU_GPR(r14)(r4)
- ld r15, VCPU_GPR(r15)(r4)
- ld r16, VCPU_GPR(r16)(r4)
- ld r17, VCPU_GPR(r17)(r4)
- ld r18, VCPU_GPR(r18)(r4)
- ld r19, VCPU_GPR(r19)(r4)
- ld r20, VCPU_GPR(r20)(r4)
- ld r21, VCPU_GPR(r21)(r4)
- ld r22, VCPU_GPR(r22)(r4)
- ld r23, VCPU_GPR(r23)(r4)
- ld r24, VCPU_GPR(r24)(r4)
- ld r25, VCPU_GPR(r25)(r4)
- ld r26, VCPU_GPR(r26)(r4)
- ld r27, VCPU_GPR(r27)(r4)
- ld r28, VCPU_GPR(r28)(r4)
- ld r29, VCPU_GPR(r29)(r4)
- ld r30, VCPU_GPR(r30)(r4)
- ld r31, VCPU_GPR(r31)(r4)
+ ld r14, VCPU_GPR(R14)(r4)
+ ld r15, VCPU_GPR(R15)(r4)
+ ld r16, VCPU_GPR(R16)(r4)
+ ld r17, VCPU_GPR(R17)(r4)
+ ld r18, VCPU_GPR(R18)(r4)
+ ld r19, VCPU_GPR(R19)(r4)
+ ld r20, VCPU_GPR(R20)(r4)
+ ld r21, VCPU_GPR(R21)(r4)
+ ld r22, VCPU_GPR(R22)(r4)
+ ld r23, VCPU_GPR(R23)(r4)
+ ld r24, VCPU_GPR(R24)(r4)
+ ld r25, VCPU_GPR(R25)(r4)
+ ld r26, VCPU_GPR(R26)(r4)
+ ld r27, VCPU_GPR(R27)(r4)
+ ld r28, VCPU_GPR(R28)(r4)
+ ld r29, VCPU_GPR(R29)(r4)
+ ld r30, VCPU_GPR(R30)(r4)
+ ld r31, VCPU_GPR(R31)(r4)
BEGIN_FTR_SECTION
/* Switch DSCR to guest value */
@@ -547,21 +544,21 @@
mtlr r5
mtcr r6
- ld r0, VCPU_GPR(r0)(r4)
- ld r1, VCPU_GPR(r1)(r4)
- ld r2, VCPU_GPR(r2)(r4)
- ld r3, VCPU_GPR(r3)(r4)
- ld r5, VCPU_GPR(r5)(r4)
- ld r6, VCPU_GPR(r6)(r4)
- ld r7, VCPU_GPR(r7)(r4)
- ld r8, VCPU_GPR(r8)(r4)
- ld r9, VCPU_GPR(r9)(r4)
- ld r10, VCPU_GPR(r10)(r4)
- ld r11, VCPU_GPR(r11)(r4)
- ld r12, VCPU_GPR(r12)(r4)
- ld r13, VCPU_GPR(r13)(r4)
+ ld r0, VCPU_GPR(R0)(r4)
+ ld r1, VCPU_GPR(R1)(r4)
+ ld r2, VCPU_GPR(R2)(r4)
+ ld r3, VCPU_GPR(R3)(r4)
+ ld r5, VCPU_GPR(R5)(r4)
+ ld r6, VCPU_GPR(R6)(r4)
+ ld r7, VCPU_GPR(R7)(r4)
+ ld r8, VCPU_GPR(R8)(r4)
+ ld r9, VCPU_GPR(R9)(r4)
+ ld r10, VCPU_GPR(R10)(r4)
+ ld r11, VCPU_GPR(R11)(r4)
+ ld r12, VCPU_GPR(R12)(r4)
+ ld r13, VCPU_GPR(R13)(r4)
- ld r4, VCPU_GPR(r4)(r4)
+ ld r4, VCPU_GPR(R4)(r4)
hrfid
b .
@@ -590,22 +587,22 @@
/* Save registers */
- std r0, VCPU_GPR(r0)(r9)
- std r1, VCPU_GPR(r1)(r9)
- std r2, VCPU_GPR(r2)(r9)
- std r3, VCPU_GPR(r3)(r9)
- std r4, VCPU_GPR(r4)(r9)
- std r5, VCPU_GPR(r5)(r9)
- std r6, VCPU_GPR(r6)(r9)
- std r7, VCPU_GPR(r7)(r9)
- std r8, VCPU_GPR(r8)(r9)
+ std r0, VCPU_GPR(R0)(r9)
+ std r1, VCPU_GPR(R1)(r9)
+ std r2, VCPU_GPR(R2)(r9)
+ std r3, VCPU_GPR(R3)(r9)
+ std r4, VCPU_GPR(R4)(r9)
+ std r5, VCPU_GPR(R5)(r9)
+ std r6, VCPU_GPR(R6)(r9)
+ std r7, VCPU_GPR(R7)(r9)
+ std r8, VCPU_GPR(R8)(r9)
ld r0, HSTATE_HOST_R2(r13)
- std r0, VCPU_GPR(r9)(r9)
- std r10, VCPU_GPR(r10)(r9)
- std r11, VCPU_GPR(r11)(r9)
+ std r0, VCPU_GPR(R9)(r9)
+ std r10, VCPU_GPR(R10)(r9)
+ std r11, VCPU_GPR(R11)(r9)
ld r3, HSTATE_SCRATCH0(r13)
lwz r4, HSTATE_SCRATCH1(r13)
- std r3, VCPU_GPR(r12)(r9)
+ std r3, VCPU_GPR(R12)(r9)
stw r4, VCPU_CR(r9)
/* Restore R1/R2 so we can handle faults */
@@ -626,7 +623,7 @@
GET_SCRATCH0(r3)
mflr r4
- std r3, VCPU_GPR(r13)(r9)
+ std r3, VCPU_GPR(R13)(r9)
std r4, VCPU_LR(r9)
/* Unset guest mode */
@@ -810,7 +807,7 @@
lwz r3,VCORE_NAPPING_THREADS(r5)
lwz r4,VCPU_PTID(r9)
li r0,1
- sldi r0,r0,r4
+ sld r0,r0,r4
andc. r3,r3,r0 /* no sense IPI'ing ourselves */
beq 43f
mulli r4,r4,PACA_SIZE /* get paca for thread 0 */
@@ -968,24 +965,24 @@
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
/* Save non-volatile GPRs */
- std r14, VCPU_GPR(r14)(r9)
- std r15, VCPU_GPR(r15)(r9)
- std r16, VCPU_GPR(r16)(r9)
- std r17, VCPU_GPR(r17)(r9)
- std r18, VCPU_GPR(r18)(r9)
- std r19, VCPU_GPR(r19)(r9)
- std r20, VCPU_GPR(r20)(r9)
- std r21, VCPU_GPR(r21)(r9)
- std r22, VCPU_GPR(r22)(r9)
- std r23, VCPU_GPR(r23)(r9)
- std r24, VCPU_GPR(r24)(r9)
- std r25, VCPU_GPR(r25)(r9)
- std r26, VCPU_GPR(r26)(r9)
- std r27, VCPU_GPR(r27)(r9)
- std r28, VCPU_GPR(r28)(r9)
- std r29, VCPU_GPR(r29)(r9)
- std r30, VCPU_GPR(r30)(r9)
- std r31, VCPU_GPR(r31)(r9)
+ std r14, VCPU_GPR(R14)(r9)
+ std r15, VCPU_GPR(R15)(r9)
+ std r16, VCPU_GPR(R16)(r9)
+ std r17, VCPU_GPR(R17)(r9)
+ std r18, VCPU_GPR(R18)(r9)
+ std r19, VCPU_GPR(R19)(r9)
+ std r20, VCPU_GPR(R20)(r9)
+ std r21, VCPU_GPR(R21)(r9)
+ std r22, VCPU_GPR(R22)(r9)
+ std r23, VCPU_GPR(R23)(r9)
+ std r24, VCPU_GPR(R24)(r9)
+ std r25, VCPU_GPR(R25)(r9)
+ std r26, VCPU_GPR(R26)(r9)
+ std r27, VCPU_GPR(R27)(r9)
+ std r28, VCPU_GPR(R28)(r9)
+ std r29, VCPU_GPR(R29)(r9)
+ std r30, VCPU_GPR(R30)(r9)
+ std r31, VCPU_GPR(R31)(r9)
/* Save SPRGs */
mfspr r3, SPRN_SPRG0
@@ -1067,6 +1064,10 @@
mtspr SPRN_DABR,r5
mtspr SPRN_DABRX,r6
+ /* Restore SPRG3 */
+ ld r3,HSTATE_SPRG3(r13)
+ mtspr SPRN_SPRG3,r3
+
/*
* Reload DEC. HDEC interrupts were disabled when
* we reloaded the host's LPCR value.
@@ -1160,7 +1161,7 @@
andi. r0, r11, MSR_DR /* data relocation enabled? */
beq 3f
clrrdi r0, r4, 28
- PPC_SLBFEE_DOT(r5, r0) /* if so, look up SLB */
+ PPC_SLBFEE_DOT(R5, R0) /* if so, look up SLB */
bne 1f /* if no SLB entry found */
4: std r4, VCPU_FAULT_DAR(r9)
stw r6, VCPU_FAULT_DSISR(r9)
@@ -1234,7 +1235,7 @@
andi. r0, r11, MSR_IR /* instruction relocation enabled? */
beq 3f
clrrdi r0, r10, 28
- PPC_SLBFEE_DOT(r5, r0) /* if so, look up SLB */
+ PPC_SLBFEE_DOT(R5, R0) /* if so, look up SLB */
bne 1f /* if no SLB entry found */
4:
/* Search the hash table. */
@@ -1278,7 +1279,7 @@
*/
.globl hcall_try_real_mode
hcall_try_real_mode:
- ld r3,VCPU_GPR(r3)(r9)
+ ld r3,VCPU_GPR(R3)(r9)
andi. r0,r11,MSR_PR
bne hcall_real_cont
clrrdi r3,r3,2
@@ -1291,12 +1292,12 @@
add r3,r3,r4
mtctr r3
mr r3,r9 /* get vcpu pointer */
- ld r4,VCPU_GPR(r4)(r9)
+ ld r4,VCPU_GPR(R4)(r9)
bctrl
cmpdi r3,H_TOO_HARD
beq hcall_real_fallback
ld r4,HSTATE_KVM_VCPU(r13)
- std r3,VCPU_GPR(r3)(r4)
+ std r3,VCPU_GPR(R3)(r4)
ld r10,VCPU_PC(r4)
ld r11,VCPU_MSR(r4)
b fast_guest_return
@@ -1424,7 +1425,7 @@
li r0,0 /* set trap to 0 to say hcall is handled */
stw r0,VCPU_TRAP(r3)
li r0,H_SUCCESS
- std r0,VCPU_GPR(r3)(r3)
+ std r0,VCPU_GPR(R3)(r3)
BEGIN_FTR_SECTION
b 2f /* just send it up to host on 970 */
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206)
@@ -1443,7 +1444,7 @@
addi r6,r5,VCORE_NAPPING_THREADS
31: lwarx r4,0,r6
or r4,r4,r0
- PPC_POPCNTW(r7,r4)
+ PPC_POPCNTW(R7,R4)
cmpw r7,r8
bge 2f
stwcx. r4,0,r6
@@ -1464,24 +1465,24 @@
* DAR, DSISR, DABR, DABRX, DSCR, PMCx, MMCRx, SIAR, SDAR.
*/
/* Save non-volatile GPRs */
- std r14, VCPU_GPR(r14)(r3)
- std r15, VCPU_GPR(r15)(r3)
- std r16, VCPU_GPR(r16)(r3)
- std r17, VCPU_GPR(r17)(r3)
- std r18, VCPU_GPR(r18)(r3)
- std r19, VCPU_GPR(r19)(r3)
- std r20, VCPU_GPR(r20)(r3)
- std r21, VCPU_GPR(r21)(r3)
- std r22, VCPU_GPR(r22)(r3)
- std r23, VCPU_GPR(r23)(r3)
- std r24, VCPU_GPR(r24)(r3)
- std r25, VCPU_GPR(r25)(r3)
- std r26, VCPU_GPR(r26)(r3)
- std r27, VCPU_GPR(r27)(r3)
- std r28, VCPU_GPR(r28)(r3)
- std r29, VCPU_GPR(r29)(r3)
- std r30, VCPU_GPR(r30)(r3)
- std r31, VCPU_GPR(r31)(r3)
+ std r14, VCPU_GPR(R14)(r3)
+ std r15, VCPU_GPR(R15)(r3)
+ std r16, VCPU_GPR(R16)(r3)
+ std r17, VCPU_GPR(R17)(r3)
+ std r18, VCPU_GPR(R18)(r3)
+ std r19, VCPU_GPR(R19)(r3)
+ std r20, VCPU_GPR(R20)(r3)
+ std r21, VCPU_GPR(R21)(r3)
+ std r22, VCPU_GPR(R22)(r3)
+ std r23, VCPU_GPR(R23)(r3)
+ std r24, VCPU_GPR(R24)(r3)
+ std r25, VCPU_GPR(R25)(r3)
+ std r26, VCPU_GPR(R26)(r3)
+ std r27, VCPU_GPR(R27)(r3)
+ std r28, VCPU_GPR(R28)(r3)
+ std r29, VCPU_GPR(R29)(r3)
+ std r30, VCPU_GPR(R30)(r3)
+ std r31, VCPU_GPR(R31)(r3)
/* save FP state */
bl .kvmppc_save_fp
@@ -1513,24 +1514,24 @@
bl kvmppc_load_fp
/* Load NV GPRS */
- ld r14, VCPU_GPR(r14)(r4)
- ld r15, VCPU_GPR(r15)(r4)
- ld r16, VCPU_GPR(r16)(r4)
- ld r17, VCPU_GPR(r17)(r4)
- ld r18, VCPU_GPR(r18)(r4)
- ld r19, VCPU_GPR(r19)(r4)
- ld r20, VCPU_GPR(r20)(r4)
- ld r21, VCPU_GPR(r21)(r4)
- ld r22, VCPU_GPR(r22)(r4)
- ld r23, VCPU_GPR(r23)(r4)
- ld r24, VCPU_GPR(r24)(r4)
- ld r25, VCPU_GPR(r25)(r4)
- ld r26, VCPU_GPR(r26)(r4)
- ld r27, VCPU_GPR(r27)(r4)
- ld r28, VCPU_GPR(r28)(r4)
- ld r29, VCPU_GPR(r29)(r4)
- ld r30, VCPU_GPR(r30)(r4)
- ld r31, VCPU_GPR(r31)(r4)
+ ld r14, VCPU_GPR(R14)(r4)
+ ld r15, VCPU_GPR(R15)(r4)
+ ld r16, VCPU_GPR(R16)(r4)
+ ld r17, VCPU_GPR(R17)(r4)
+ ld r18, VCPU_GPR(R18)(r4)
+ ld r19, VCPU_GPR(R19)(r4)
+ ld r20, VCPU_GPR(R20)(r4)
+ ld r21, VCPU_GPR(R21)(r4)
+ ld r22, VCPU_GPR(R22)(r4)
+ ld r23, VCPU_GPR(R23)(r4)
+ ld r24, VCPU_GPR(R24)(r4)
+ ld r25, VCPU_GPR(R25)(r4)
+ ld r26, VCPU_GPR(R26)(r4)
+ ld r27, VCPU_GPR(R27)(r4)
+ ld r28, VCPU_GPR(R28)(r4)
+ ld r29, VCPU_GPR(R29)(r4)
+ ld r30, VCPU_GPR(R30)(r4)
+ ld r31, VCPU_GPR(R31)(r4)
/* clear our bit in vcore->napping_threads */
33: ld r5,HSTATE_KVM_VCORE(r13)
@@ -1649,7 +1650,7 @@
reg = 0
.rept 32
li r6,reg*16+VCPU_VSRS
- STXVD2X(reg,r6,r3)
+ STXVD2X(reg,R6,R3)
reg = reg + 1
.endr
FTR_SECTION_ELSE
@@ -1711,7 +1712,7 @@
reg = 0
.rept 32
li r7,reg*16+VCPU_VSRS
- LXVD2X(reg,r7,r4)
+ LXVD2X(reg,R7,R4)
reg = reg + 1
.endr
FTR_SECTION_ELSE
diff --git a/arch/powerpc/kvm/book3s_interrupts.S b/arch/powerpc/kvm/book3s_interrupts.S
index 3e35383..48cbbf8 100644
--- a/arch/powerpc/kvm/book3s_interrupts.S
+++ b/arch/powerpc/kvm/book3s_interrupts.S
@@ -25,38 +25,30 @@
#include <asm/exception-64s.h>
#if defined(CONFIG_PPC_BOOK3S_64)
-
-#define ULONG_SIZE 8
#define FUNC(name) GLUE(.,name)
-
#elif defined(CONFIG_PPC_BOOK3S_32)
-
-#define ULONG_SIZE 4
#define FUNC(name) name
-
#endif /* CONFIG_PPC_BOOK3S_XX */
-
-#define VCPU_GPR(n) (VCPU_GPRS + (n * ULONG_SIZE))
#define VCPU_LOAD_NVGPRS(vcpu) \
- PPC_LL r14, VCPU_GPR(r14)(vcpu); \
- PPC_LL r15, VCPU_GPR(r15)(vcpu); \
- PPC_LL r16, VCPU_GPR(r16)(vcpu); \
- PPC_LL r17, VCPU_GPR(r17)(vcpu); \
- PPC_LL r18, VCPU_GPR(r18)(vcpu); \
- PPC_LL r19, VCPU_GPR(r19)(vcpu); \
- PPC_LL r20, VCPU_GPR(r20)(vcpu); \
- PPC_LL r21, VCPU_GPR(r21)(vcpu); \
- PPC_LL r22, VCPU_GPR(r22)(vcpu); \
- PPC_LL r23, VCPU_GPR(r23)(vcpu); \
- PPC_LL r24, VCPU_GPR(r24)(vcpu); \
- PPC_LL r25, VCPU_GPR(r25)(vcpu); \
- PPC_LL r26, VCPU_GPR(r26)(vcpu); \
- PPC_LL r27, VCPU_GPR(r27)(vcpu); \
- PPC_LL r28, VCPU_GPR(r28)(vcpu); \
- PPC_LL r29, VCPU_GPR(r29)(vcpu); \
- PPC_LL r30, VCPU_GPR(r30)(vcpu); \
- PPC_LL r31, VCPU_GPR(r31)(vcpu); \
+ PPC_LL r14, VCPU_GPR(R14)(vcpu); \
+ PPC_LL r15, VCPU_GPR(R15)(vcpu); \
+ PPC_LL r16, VCPU_GPR(R16)(vcpu); \
+ PPC_LL r17, VCPU_GPR(R17)(vcpu); \
+ PPC_LL r18, VCPU_GPR(R18)(vcpu); \
+ PPC_LL r19, VCPU_GPR(R19)(vcpu); \
+ PPC_LL r20, VCPU_GPR(R20)(vcpu); \
+ PPC_LL r21, VCPU_GPR(R21)(vcpu); \
+ PPC_LL r22, VCPU_GPR(R22)(vcpu); \
+ PPC_LL r23, VCPU_GPR(R23)(vcpu); \
+ PPC_LL r24, VCPU_GPR(R24)(vcpu); \
+ PPC_LL r25, VCPU_GPR(R25)(vcpu); \
+ PPC_LL r26, VCPU_GPR(R26)(vcpu); \
+ PPC_LL r27, VCPU_GPR(R27)(vcpu); \
+ PPC_LL r28, VCPU_GPR(R28)(vcpu); \
+ PPC_LL r29, VCPU_GPR(R29)(vcpu); \
+ PPC_LL r30, VCPU_GPR(R30)(vcpu); \
+ PPC_LL r31, VCPU_GPR(R31)(vcpu); \
/*****************************************************************************
* *
@@ -131,24 +123,24 @@
/* R7 = vcpu */
PPC_LL r7, GPR4(r1)
- PPC_STL r14, VCPU_GPR(r14)(r7)
- PPC_STL r15, VCPU_GPR(r15)(r7)
- PPC_STL r16, VCPU_GPR(r16)(r7)
- PPC_STL r17, VCPU_GPR(r17)(r7)
- PPC_STL r18, VCPU_GPR(r18)(r7)
- PPC_STL r19, VCPU_GPR(r19)(r7)
- PPC_STL r20, VCPU_GPR(r20)(r7)
- PPC_STL r21, VCPU_GPR(r21)(r7)
- PPC_STL r22, VCPU_GPR(r22)(r7)
- PPC_STL r23, VCPU_GPR(r23)(r7)
- PPC_STL r24, VCPU_GPR(r24)(r7)
- PPC_STL r25, VCPU_GPR(r25)(r7)
- PPC_STL r26, VCPU_GPR(r26)(r7)
- PPC_STL r27, VCPU_GPR(r27)(r7)
- PPC_STL r28, VCPU_GPR(r28)(r7)
- PPC_STL r29, VCPU_GPR(r29)(r7)
- PPC_STL r30, VCPU_GPR(r30)(r7)
- PPC_STL r31, VCPU_GPR(r31)(r7)
+ PPC_STL r14, VCPU_GPR(R14)(r7)
+ PPC_STL r15, VCPU_GPR(R15)(r7)
+ PPC_STL r16, VCPU_GPR(R16)(r7)
+ PPC_STL r17, VCPU_GPR(R17)(r7)
+ PPC_STL r18, VCPU_GPR(R18)(r7)
+ PPC_STL r19, VCPU_GPR(R19)(r7)
+ PPC_STL r20, VCPU_GPR(R20)(r7)
+ PPC_STL r21, VCPU_GPR(R21)(r7)
+ PPC_STL r22, VCPU_GPR(R22)(r7)
+ PPC_STL r23, VCPU_GPR(R23)(r7)
+ PPC_STL r24, VCPU_GPR(R24)(r7)
+ PPC_STL r25, VCPU_GPR(R25)(r7)
+ PPC_STL r26, VCPU_GPR(R26)(r7)
+ PPC_STL r27, VCPU_GPR(R27)(r7)
+ PPC_STL r28, VCPU_GPR(R28)(r7)
+ PPC_STL r29, VCPU_GPR(R29)(r7)
+ PPC_STL r30, VCPU_GPR(R30)(r7)
+ PPC_STL r31, VCPU_GPR(R31)(r7)
/* Pass the exit number as 3rd argument to kvmppc_handle_exit */
mr r5, r12
diff --git a/arch/powerpc/kvm/book3s_pr_papr.c b/arch/powerpc/kvm/book3s_pr_papr.c
index 3ff9013..ee02b30 100644
--- a/arch/powerpc/kvm/book3s_pr_papr.c
+++ b/arch/powerpc/kvm/book3s_pr_papr.c
@@ -241,6 +241,7 @@
case H_PUT_TCE:
return kvmppc_h_pr_put_tce(vcpu);
case H_CEDE:
+ vcpu->arch.shared->msr |= MSR_EE;
kvm_vcpu_block(vcpu);
clear_bit(KVM_REQ_UNHALT, &vcpu->requests);
vcpu->stat.halt_wakeup++;
diff --git a/arch/powerpc/kvm/book3s_rmhandlers.S b/arch/powerpc/kvm/book3s_rmhandlers.S
index 3418758..ab523f3 100644
--- a/arch/powerpc/kvm/book3s_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_rmhandlers.S
@@ -37,7 +37,6 @@
#if defined(CONFIG_PPC_BOOK3S_64)
#define FUNC(name) GLUE(.,name)
-#define MTMSR_EERI(reg) mtmsrd (reg),1
.globl kvmppc_skip_interrupt
kvmppc_skip_interrupt:
diff --git a/arch/powerpc/kvm/book3s_segment.S b/arch/powerpc/kvm/book3s_segment.S
index 798491a..1abe478 100644
--- a/arch/powerpc/kvm/book3s_segment.S
+++ b/arch/powerpc/kvm/book3s_segment.S
@@ -23,7 +23,6 @@
#define GET_SHADOW_VCPU(reg) \
mr reg, r13
-#define MTMSR_EERI(reg) mtmsrd (reg),1
#elif defined(CONFIG_PPC_BOOK3S_32)
@@ -31,7 +30,6 @@
tophys(reg, r2); \
lwz reg, (THREAD + THREAD_KVM_SVCPU)(reg); \
tophys(reg, reg)
-#define MTMSR_EERI(reg) mtmsr (reg)
#endif
diff --git a/arch/powerpc/kvm/booke_interrupts.S b/arch/powerpc/kvm/booke_interrupts.S
index 8feec2f..8fd4b2a 100644
--- a/arch/powerpc/kvm/booke_interrupts.S
+++ b/arch/powerpc/kvm/booke_interrupts.S
@@ -25,8 +25,6 @@
#include <asm/page.h>
#include <asm/asm-offsets.h>
-#define VCPU_GPR(n) (VCPU_GPRS + (n * 4))
-
/* The host stack layout: */
#define HOST_R1 0 /* Implied by stwu. */
#define HOST_CALLEE_LR 4
@@ -36,8 +34,9 @@
#define HOST_R2 12
#define HOST_CR 16
#define HOST_NV_GPRS 20
-#define HOST_NV_GPR(n) (HOST_NV_GPRS + ((n - 14) * 4))
-#define HOST_MIN_STACK_SIZE (HOST_NV_GPR(31) + 4)
+#define __HOST_NV_GPR(n) (HOST_NV_GPRS + ((n - 14) * 4))
+#define HOST_NV_GPR(n) __HOST_NV_GPR(__REG_##n)
+#define HOST_MIN_STACK_SIZE (HOST_NV_GPR(R31) + 4)
#define HOST_STACK_SIZE (((HOST_MIN_STACK_SIZE + 15) / 16) * 16) /* Align. */
#define HOST_STACK_LR (HOST_STACK_SIZE + 4) /* In caller stack frame. */
@@ -58,8 +57,8 @@
/* Get pointer to vcpu and record exit number. */
mtspr SPRN_SPRG_WSCRATCH0, r4
mfspr r4, SPRN_SPRG_RVCPU
- stw r5, VCPU_GPR(r5)(r4)
- stw r6, VCPU_GPR(r6)(r4)
+ stw r5, VCPU_GPR(R5)(r4)
+ stw r6, VCPU_GPR(R6)(r4)
mfctr r5
lis r6, kvmppc_resume_host@h
stw r5, VCPU_CTR(r4)
@@ -100,12 +99,12 @@
* r5: KVM exit number
*/
_GLOBAL(kvmppc_resume_host)
- stw r3, VCPU_GPR(r3)(r4)
+ stw r3, VCPU_GPR(R3)(r4)
mfcr r3
stw r3, VCPU_CR(r4)
- stw r7, VCPU_GPR(r7)(r4)
- stw r8, VCPU_GPR(r8)(r4)
- stw r9, VCPU_GPR(r9)(r4)
+ stw r7, VCPU_GPR(R7)(r4)
+ stw r8, VCPU_GPR(R8)(r4)
+ stw r9, VCPU_GPR(R9)(r4)
li r6, 1
slw r6, r6, r5
@@ -135,23 +134,23 @@
isync
stw r9, VCPU_LAST_INST(r4)
- stw r15, VCPU_GPR(r15)(r4)
- stw r16, VCPU_GPR(r16)(r4)
- stw r17, VCPU_GPR(r17)(r4)
- stw r18, VCPU_GPR(r18)(r4)
- stw r19, VCPU_GPR(r19)(r4)
- stw r20, VCPU_GPR(r20)(r4)
- stw r21, VCPU_GPR(r21)(r4)
- stw r22, VCPU_GPR(r22)(r4)
- stw r23, VCPU_GPR(r23)(r4)
- stw r24, VCPU_GPR(r24)(r4)
- stw r25, VCPU_GPR(r25)(r4)
- stw r26, VCPU_GPR(r26)(r4)
- stw r27, VCPU_GPR(r27)(r4)
- stw r28, VCPU_GPR(r28)(r4)
- stw r29, VCPU_GPR(r29)(r4)
- stw r30, VCPU_GPR(r30)(r4)
- stw r31, VCPU_GPR(r31)(r4)
+ stw r15, VCPU_GPR(R15)(r4)
+ stw r16, VCPU_GPR(R16)(r4)
+ stw r17, VCPU_GPR(R17)(r4)
+ stw r18, VCPU_GPR(R18)(r4)
+ stw r19, VCPU_GPR(R19)(r4)
+ stw r20, VCPU_GPR(R20)(r4)
+ stw r21, VCPU_GPR(R21)(r4)
+ stw r22, VCPU_GPR(R22)(r4)
+ stw r23, VCPU_GPR(R23)(r4)
+ stw r24, VCPU_GPR(R24)(r4)
+ stw r25, VCPU_GPR(R25)(r4)
+ stw r26, VCPU_GPR(R26)(r4)
+ stw r27, VCPU_GPR(R27)(r4)
+ stw r28, VCPU_GPR(R28)(r4)
+ stw r29, VCPU_GPR(R29)(r4)
+ stw r30, VCPU_GPR(R30)(r4)
+ stw r31, VCPU_GPR(R31)(r4)
..skip_inst_copy:
/* Also grab DEAR and ESR before the host can clobber them. */
@@ -169,20 +168,20 @@
..skip_esr:
/* Save remaining volatile guest register state to vcpu. */
- stw r0, VCPU_GPR(r0)(r4)
- stw r1, VCPU_GPR(r1)(r4)
- stw r2, VCPU_GPR(r2)(r4)
- stw r10, VCPU_GPR(r10)(r4)
- stw r11, VCPU_GPR(r11)(r4)
- stw r12, VCPU_GPR(r12)(r4)
- stw r13, VCPU_GPR(r13)(r4)
- stw r14, VCPU_GPR(r14)(r4) /* We need a NV GPR below. */
+ stw r0, VCPU_GPR(R0)(r4)
+ stw r1, VCPU_GPR(R1)(r4)
+ stw r2, VCPU_GPR(R2)(r4)
+ stw r10, VCPU_GPR(R10)(r4)
+ stw r11, VCPU_GPR(R11)(r4)
+ stw r12, VCPU_GPR(R12)(r4)
+ stw r13, VCPU_GPR(R13)(r4)
+ stw r14, VCPU_GPR(R14)(r4) /* We need a NV GPR below. */
mflr r3
stw r3, VCPU_LR(r4)
mfxer r3
stw r3, VCPU_XER(r4)
mfspr r3, SPRN_SPRG_RSCRATCH0
- stw r3, VCPU_GPR(r4)(r4)
+ stw r3, VCPU_GPR(R4)(r4)
mfspr r3, SPRN_SRR0
stw r3, VCPU_PC(r4)
@@ -214,28 +213,28 @@
/* Restore vcpu pointer and the nonvolatiles we used. */
mr r4, r14
- lwz r14, VCPU_GPR(r14)(r4)
+ lwz r14, VCPU_GPR(R14)(r4)
/* Sometimes instruction emulation must restore complete GPR state. */
andi. r5, r3, RESUME_FLAG_NV
beq ..skip_nv_load
- lwz r15, VCPU_GPR(r15)(r4)
- lwz r16, VCPU_GPR(r16)(r4)
- lwz r17, VCPU_GPR(r17)(r4)
- lwz r18, VCPU_GPR(r18)(r4)
- lwz r19, VCPU_GPR(r19)(r4)
- lwz r20, VCPU_GPR(r20)(r4)
- lwz r21, VCPU_GPR(r21)(r4)
- lwz r22, VCPU_GPR(r22)(r4)
- lwz r23, VCPU_GPR(r23)(r4)
- lwz r24, VCPU_GPR(r24)(r4)
- lwz r25, VCPU_GPR(r25)(r4)
- lwz r26, VCPU_GPR(r26)(r4)
- lwz r27, VCPU_GPR(r27)(r4)
- lwz r28, VCPU_GPR(r28)(r4)
- lwz r29, VCPU_GPR(r29)(r4)
- lwz r30, VCPU_GPR(r30)(r4)
- lwz r31, VCPU_GPR(r31)(r4)
+ lwz r15, VCPU_GPR(R15)(r4)
+ lwz r16, VCPU_GPR(R16)(r4)
+ lwz r17, VCPU_GPR(R17)(r4)
+ lwz r18, VCPU_GPR(R18)(r4)
+ lwz r19, VCPU_GPR(R19)(r4)
+ lwz r20, VCPU_GPR(R20)(r4)
+ lwz r21, VCPU_GPR(R21)(r4)
+ lwz r22, VCPU_GPR(R22)(r4)
+ lwz r23, VCPU_GPR(R23)(r4)
+ lwz r24, VCPU_GPR(R24)(r4)
+ lwz r25, VCPU_GPR(R25)(r4)
+ lwz r26, VCPU_GPR(R26)(r4)
+ lwz r27, VCPU_GPR(R27)(r4)
+ lwz r28, VCPU_GPR(R28)(r4)
+ lwz r29, VCPU_GPR(R29)(r4)
+ lwz r30, VCPU_GPR(R30)(r4)
+ lwz r31, VCPU_GPR(R31)(r4)
..skip_nv_load:
/* Should we return to the guest? */
@@ -257,43 +256,43 @@
/* We already saved guest volatile register state; now save the
* non-volatiles. */
- stw r15, VCPU_GPR(r15)(r4)
- stw r16, VCPU_GPR(r16)(r4)
- stw r17, VCPU_GPR(r17)(r4)
- stw r18, VCPU_GPR(r18)(r4)
- stw r19, VCPU_GPR(r19)(r4)
- stw r20, VCPU_GPR(r20)(r4)
- stw r21, VCPU_GPR(r21)(r4)
- stw r22, VCPU_GPR(r22)(r4)
- stw r23, VCPU_GPR(r23)(r4)
- stw r24, VCPU_GPR(r24)(r4)
- stw r25, VCPU_GPR(r25)(r4)
- stw r26, VCPU_GPR(r26)(r4)
- stw r27, VCPU_GPR(r27)(r4)
- stw r28, VCPU_GPR(r28)(r4)
- stw r29, VCPU_GPR(r29)(r4)
- stw r30, VCPU_GPR(r30)(r4)
- stw r31, VCPU_GPR(r31)(r4)
+ stw r15, VCPU_GPR(R15)(r4)
+ stw r16, VCPU_GPR(R16)(r4)
+ stw r17, VCPU_GPR(R17)(r4)
+ stw r18, VCPU_GPR(R18)(r4)
+ stw r19, VCPU_GPR(R19)(r4)
+ stw r20, VCPU_GPR(R20)(r4)
+ stw r21, VCPU_GPR(R21)(r4)
+ stw r22, VCPU_GPR(R22)(r4)
+ stw r23, VCPU_GPR(R23)(r4)
+ stw r24, VCPU_GPR(R24)(r4)
+ stw r25, VCPU_GPR(R25)(r4)
+ stw r26, VCPU_GPR(R26)(r4)
+ stw r27, VCPU_GPR(R27)(r4)
+ stw r28, VCPU_GPR(R28)(r4)
+ stw r29, VCPU_GPR(R29)(r4)
+ stw r30, VCPU_GPR(R30)(r4)
+ stw r31, VCPU_GPR(R31)(r4)
/* Load host non-volatile register state from host stack. */
- lwz r14, HOST_NV_GPR(r14)(r1)
- lwz r15, HOST_NV_GPR(r15)(r1)
- lwz r16, HOST_NV_GPR(r16)(r1)
- lwz r17, HOST_NV_GPR(r17)(r1)
- lwz r18, HOST_NV_GPR(r18)(r1)
- lwz r19, HOST_NV_GPR(r19)(r1)
- lwz r20, HOST_NV_GPR(r20)(r1)
- lwz r21, HOST_NV_GPR(r21)(r1)
- lwz r22, HOST_NV_GPR(r22)(r1)
- lwz r23, HOST_NV_GPR(r23)(r1)
- lwz r24, HOST_NV_GPR(r24)(r1)
- lwz r25, HOST_NV_GPR(r25)(r1)
- lwz r26, HOST_NV_GPR(r26)(r1)
- lwz r27, HOST_NV_GPR(r27)(r1)
- lwz r28, HOST_NV_GPR(r28)(r1)
- lwz r29, HOST_NV_GPR(r29)(r1)
- lwz r30, HOST_NV_GPR(r30)(r1)
- lwz r31, HOST_NV_GPR(r31)(r1)
+ lwz r14, HOST_NV_GPR(R14)(r1)
+ lwz r15, HOST_NV_GPR(R15)(r1)
+ lwz r16, HOST_NV_GPR(R16)(r1)
+ lwz r17, HOST_NV_GPR(R17)(r1)
+ lwz r18, HOST_NV_GPR(R18)(r1)
+ lwz r19, HOST_NV_GPR(R19)(r1)
+ lwz r20, HOST_NV_GPR(R20)(r1)
+ lwz r21, HOST_NV_GPR(R21)(r1)
+ lwz r22, HOST_NV_GPR(R22)(r1)
+ lwz r23, HOST_NV_GPR(R23)(r1)
+ lwz r24, HOST_NV_GPR(R24)(r1)
+ lwz r25, HOST_NV_GPR(R25)(r1)
+ lwz r26, HOST_NV_GPR(R26)(r1)
+ lwz r27, HOST_NV_GPR(R27)(r1)
+ lwz r28, HOST_NV_GPR(R28)(r1)
+ lwz r29, HOST_NV_GPR(R29)(r1)
+ lwz r30, HOST_NV_GPR(R30)(r1)
+ lwz r31, HOST_NV_GPR(R31)(r1)
/* Return to kvm_vcpu_run(). */
lwz r4, HOST_STACK_LR(r1)
@@ -321,44 +320,44 @@
stw r5, HOST_CR(r1)
/* Save host non-volatile register state to stack. */
- stw r14, HOST_NV_GPR(r14)(r1)
- stw r15, HOST_NV_GPR(r15)(r1)
- stw r16, HOST_NV_GPR(r16)(r1)
- stw r17, HOST_NV_GPR(r17)(r1)
- stw r18, HOST_NV_GPR(r18)(r1)
- stw r19, HOST_NV_GPR(r19)(r1)
- stw r20, HOST_NV_GPR(r20)(r1)
- stw r21, HOST_NV_GPR(r21)(r1)
- stw r22, HOST_NV_GPR(r22)(r1)
- stw r23, HOST_NV_GPR(r23)(r1)
- stw r24, HOST_NV_GPR(r24)(r1)
- stw r25, HOST_NV_GPR(r25)(r1)
- stw r26, HOST_NV_GPR(r26)(r1)
- stw r27, HOST_NV_GPR(r27)(r1)
- stw r28, HOST_NV_GPR(r28)(r1)
- stw r29, HOST_NV_GPR(r29)(r1)
- stw r30, HOST_NV_GPR(r30)(r1)
- stw r31, HOST_NV_GPR(r31)(r1)
+ stw r14, HOST_NV_GPR(R14)(r1)
+ stw r15, HOST_NV_GPR(R15)(r1)
+ stw r16, HOST_NV_GPR(R16)(r1)
+ stw r17, HOST_NV_GPR(R17)(r1)
+ stw r18, HOST_NV_GPR(R18)(r1)
+ stw r19, HOST_NV_GPR(R19)(r1)
+ stw r20, HOST_NV_GPR(R20)(r1)
+ stw r21, HOST_NV_GPR(R21)(r1)
+ stw r22, HOST_NV_GPR(R22)(r1)
+ stw r23, HOST_NV_GPR(R23)(r1)
+ stw r24, HOST_NV_GPR(R24)(r1)
+ stw r25, HOST_NV_GPR(R25)(r1)
+ stw r26, HOST_NV_GPR(R26)(r1)
+ stw r27, HOST_NV_GPR(R27)(r1)
+ stw r28, HOST_NV_GPR(R28)(r1)
+ stw r29, HOST_NV_GPR(R29)(r1)
+ stw r30, HOST_NV_GPR(R30)(r1)
+ stw r31, HOST_NV_GPR(R31)(r1)
/* Load guest non-volatiles. */
- lwz r14, VCPU_GPR(r14)(r4)
- lwz r15, VCPU_GPR(r15)(r4)
- lwz r16, VCPU_GPR(r16)(r4)
- lwz r17, VCPU_GPR(r17)(r4)
- lwz r18, VCPU_GPR(r18)(r4)
- lwz r19, VCPU_GPR(r19)(r4)
- lwz r20, VCPU_GPR(r20)(r4)
- lwz r21, VCPU_GPR(r21)(r4)
- lwz r22, VCPU_GPR(r22)(r4)
- lwz r23, VCPU_GPR(r23)(r4)
- lwz r24, VCPU_GPR(r24)(r4)
- lwz r25, VCPU_GPR(r25)(r4)
- lwz r26, VCPU_GPR(r26)(r4)
- lwz r27, VCPU_GPR(r27)(r4)
- lwz r28, VCPU_GPR(r28)(r4)
- lwz r29, VCPU_GPR(r29)(r4)
- lwz r30, VCPU_GPR(r30)(r4)
- lwz r31, VCPU_GPR(r31)(r4)
+ lwz r14, VCPU_GPR(R14)(r4)
+ lwz r15, VCPU_GPR(R15)(r4)
+ lwz r16, VCPU_GPR(R16)(r4)
+ lwz r17, VCPU_GPR(R17)(r4)
+ lwz r18, VCPU_GPR(R18)(r4)
+ lwz r19, VCPU_GPR(R19)(r4)
+ lwz r20, VCPU_GPR(R20)(r4)
+ lwz r21, VCPU_GPR(R21)(r4)
+ lwz r22, VCPU_GPR(R22)(r4)
+ lwz r23, VCPU_GPR(R23)(r4)
+ lwz r24, VCPU_GPR(R24)(r4)
+ lwz r25, VCPU_GPR(R25)(r4)
+ lwz r26, VCPU_GPR(R26)(r4)
+ lwz r27, VCPU_GPR(R27)(r4)
+ lwz r28, VCPU_GPR(R28)(r4)
+ lwz r29, VCPU_GPR(R29)(r4)
+ lwz r30, VCPU_GPR(R30)(r4)
+ lwz r31, VCPU_GPR(R31)(r4)
#ifdef CONFIG_SPE
/* save host SPEFSCR and load guest SPEFSCR */
@@ -386,13 +385,13 @@
#endif
/* Load some guest volatiles. */
- lwz r0, VCPU_GPR(r0)(r4)
- lwz r2, VCPU_GPR(r2)(r4)
- lwz r9, VCPU_GPR(r9)(r4)
- lwz r10, VCPU_GPR(r10)(r4)
- lwz r11, VCPU_GPR(r11)(r4)
- lwz r12, VCPU_GPR(r12)(r4)
- lwz r13, VCPU_GPR(r13)(r4)
+ lwz r0, VCPU_GPR(R0)(r4)
+ lwz r2, VCPU_GPR(R2)(r4)
+ lwz r9, VCPU_GPR(R9)(r4)
+ lwz r10, VCPU_GPR(R10)(r4)
+ lwz r11, VCPU_GPR(R11)(r4)
+ lwz r12, VCPU_GPR(R12)(r4)
+ lwz r13, VCPU_GPR(R13)(r4)
lwz r3, VCPU_LR(r4)
mtlr r3
lwz r3, VCPU_XER(r4)
@@ -411,7 +410,7 @@
/* Can't switch the stack pointer until after IVPR is switched,
* because host interrupt handlers would get confused. */
- lwz r1, VCPU_GPR(r1)(r4)
+ lwz r1, VCPU_GPR(R1)(r4)
/*
* Host interrupt handlers may have clobbered these
@@ -449,10 +448,10 @@
mtcr r5
mtsrr0 r6
mtsrr1 r7
- lwz r5, VCPU_GPR(r5)(r4)
- lwz r6, VCPU_GPR(r6)(r4)
- lwz r7, VCPU_GPR(r7)(r4)
- lwz r8, VCPU_GPR(r8)(r4)
+ lwz r5, VCPU_GPR(R5)(r4)
+ lwz r6, VCPU_GPR(R6)(r4)
+ lwz r7, VCPU_GPR(R7)(r4)
+ lwz r8, VCPU_GPR(R8)(r4)
/* Clear any debug events which occurred since we disabled MSR[DE].
* XXX This gives us a 3-instruction window in which a breakpoint
@@ -461,8 +460,8 @@
ori r3, r3, 0xffff
mtspr SPRN_DBSR, r3
- lwz r3, VCPU_GPR(r3)(r4)
- lwz r4, VCPU_GPR(r4)(r4)
+ lwz r3, VCPU_GPR(R3)(r4)
+ lwz r4, VCPU_GPR(R4)(r4)
rfi
#ifdef CONFIG_SPE
diff --git a/arch/powerpc/kvm/bookehv_interrupts.S b/arch/powerpc/kvm/bookehv_interrupts.S
index 6048a00..1685dc4 100644
--- a/arch/powerpc/kvm/bookehv_interrupts.S
+++ b/arch/powerpc/kvm/bookehv_interrupts.S
@@ -37,7 +37,6 @@
#define LONGBYTES (BITS_PER_LONG / 8)
-#define VCPU_GPR(n) (VCPU_GPRS + (n * LONGBYTES))
#define VCPU_GUEST_SPRG(n) (VCPU_GUEST_SPRGS + (n * LONGBYTES))
/* The host stack layout: */
@@ -67,15 +66,15 @@
*/
.macro kvm_handler_common intno, srr0, flags
/* Restore host stack pointer */
- PPC_STL r1, VCPU_GPR(r1)(r4)
- PPC_STL r2, VCPU_GPR(r2)(r4)
+ PPC_STL r1, VCPU_GPR(R1)(r4)
+ PPC_STL r2, VCPU_GPR(R2)(r4)
PPC_LL r1, VCPU_HOST_STACK(r4)
PPC_LL r2, HOST_R2(r1)
mfspr r10, SPRN_PID
lwz r8, VCPU_HOST_PID(r4)
PPC_LL r11, VCPU_SHARED(r4)
- PPC_STL r14, VCPU_GPR(r14)(r4) /* We need a non-volatile GPR. */
+ PPC_STL r14, VCPU_GPR(R14)(r4) /* We need a non-volatile GPR. */
li r14, \intno
stw r10, VCPU_GUEST_PID(r4)
@@ -137,35 +136,31 @@
*/
mfspr r3, SPRN_EPLC /* will already have correct ELPID and EGS */
- PPC_STL r15, VCPU_GPR(r15)(r4)
- PPC_STL r16, VCPU_GPR(r16)(r4)
- PPC_STL r17, VCPU_GPR(r17)(r4)
- PPC_STL r18, VCPU_GPR(r18)(r4)
- PPC_STL r19, VCPU_GPR(r19)(r4)
+ PPC_STL r15, VCPU_GPR(R15)(r4)
+ PPC_STL r16, VCPU_GPR(R16)(r4)
+ PPC_STL r17, VCPU_GPR(R17)(r4)
+ PPC_STL r18, VCPU_GPR(R18)(r4)
+ PPC_STL r19, VCPU_GPR(R19)(r4)
mr r8, r3
- PPC_STL r20, VCPU_GPR(r20)(r4)
+ PPC_STL r20, VCPU_GPR(R20)(r4)
rlwimi r8, r6, EPC_EAS_SHIFT - MSR_IR_LG, EPC_EAS
- PPC_STL r21, VCPU_GPR(r21)(r4)
+ PPC_STL r21, VCPU_GPR(R21)(r4)
rlwimi r8, r6, EPC_EPR_SHIFT - MSR_PR_LG, EPC_EPR
- PPC_STL r22, VCPU_GPR(r22)(r4)
+ PPC_STL r22, VCPU_GPR(R22)(r4)
rlwimi r8, r10, EPC_EPID_SHIFT, EPC_EPID
- PPC_STL r23, VCPU_GPR(r23)(r4)
- PPC_STL r24, VCPU_GPR(r24)(r4)
- PPC_STL r25, VCPU_GPR(r25)(r4)
- PPC_STL r26, VCPU_GPR(r26)(r4)
- PPC_STL r27, VCPU_GPR(r27)(r4)
- PPC_STL r28, VCPU_GPR(r28)(r4)
- PPC_STL r29, VCPU_GPR(r29)(r4)
- PPC_STL r30, VCPU_GPR(r30)(r4)
- PPC_STL r31, VCPU_GPR(r31)(r4)
+ PPC_STL r23, VCPU_GPR(R23)(r4)
+ PPC_STL r24, VCPU_GPR(R24)(r4)
+ PPC_STL r25, VCPU_GPR(R25)(r4)
+ PPC_STL r26, VCPU_GPR(R26)(r4)
+ PPC_STL r27, VCPU_GPR(R27)(r4)
+ PPC_STL r28, VCPU_GPR(R28)(r4)
+ PPC_STL r29, VCPU_GPR(R29)(r4)
+ PPC_STL r30, VCPU_GPR(R30)(r4)
+ PPC_STL r31, VCPU_GPR(R31)(r4)
mtspr SPRN_EPLC, r8
/* disable preemption, so we are sure we hit the fixup handler */
-#ifdef CONFIG_PPC64
- clrrdi r8,r1,THREAD_SHIFT
-#else
- rlwinm r8,r1,0,0,31-THREAD_SHIFT /* current thread_info */
-#endif
+ CURRENT_THREAD_INFO(r8, r1)
li r7, 1
stw r7, TI_PREEMPT(r8)
@@ -211,24 +206,24 @@
.macro kvm_handler intno srr0, srr1, flags
_GLOBAL(kvmppc_handler_\intno\()_\srr1)
GET_VCPU(r11, r10)
- PPC_STL r3, VCPU_GPR(r3)(r11)
+ PPC_STL r3, VCPU_GPR(R3)(r11)
mfspr r3, SPRN_SPRG_RSCRATCH0
- PPC_STL r4, VCPU_GPR(r4)(r11)
+ PPC_STL r4, VCPU_GPR(R4)(r11)
PPC_LL r4, THREAD_NORMSAVE(0)(r10)
- PPC_STL r5, VCPU_GPR(r5)(r11)
+ PPC_STL r5, VCPU_GPR(R5)(r11)
stw r13, VCPU_CR(r11)
mfspr r5, \srr0
- PPC_STL r3, VCPU_GPR(r10)(r11)
+ PPC_STL r3, VCPU_GPR(R10)(r11)
PPC_LL r3, THREAD_NORMSAVE(2)(r10)
- PPC_STL r6, VCPU_GPR(r6)(r11)
- PPC_STL r4, VCPU_GPR(r11)(r11)
+ PPC_STL r6, VCPU_GPR(R6)(r11)
+ PPC_STL r4, VCPU_GPR(R11)(r11)
mfspr r6, \srr1
- PPC_STL r7, VCPU_GPR(r7)(r11)
- PPC_STL r8, VCPU_GPR(r8)(r11)
- PPC_STL r9, VCPU_GPR(r9)(r11)
- PPC_STL r3, VCPU_GPR(r13)(r11)
+ PPC_STL r7, VCPU_GPR(R7)(r11)
+ PPC_STL r8, VCPU_GPR(R8)(r11)
+ PPC_STL r9, VCPU_GPR(R9)(r11)
+ PPC_STL r3, VCPU_GPR(R13)(r11)
mfctr r7
- PPC_STL r12, VCPU_GPR(r12)(r11)
+ PPC_STL r12, VCPU_GPR(R12)(r11)
PPC_STL r7, VCPU_CTR(r11)
mr r4, r11
kvm_handler_common \intno, \srr0, \flags
@@ -238,25 +233,25 @@
_GLOBAL(kvmppc_handler_\intno\()_\srr1)
mfspr r10, SPRN_SPRG_THREAD
GET_VCPU(r11, r10)
- PPC_STL r3, VCPU_GPR(r3)(r11)
+ PPC_STL r3, VCPU_GPR(R3)(r11)
mfspr r3, \scratch
- PPC_STL r4, VCPU_GPR(r4)(r11)
+ PPC_STL r4, VCPU_GPR(R4)(r11)
PPC_LL r4, GPR9(r8)
- PPC_STL r5, VCPU_GPR(r5)(r11)
+ PPC_STL r5, VCPU_GPR(R5)(r11)
stw r9, VCPU_CR(r11)
mfspr r5, \srr0
- PPC_STL r3, VCPU_GPR(r8)(r11)
+ PPC_STL r3, VCPU_GPR(R8)(r11)
PPC_LL r3, GPR10(r8)
- PPC_STL r6, VCPU_GPR(r6)(r11)
- PPC_STL r4, VCPU_GPR(r9)(r11)
+ PPC_STL r6, VCPU_GPR(R6)(r11)
+ PPC_STL r4, VCPU_GPR(R9)(r11)
mfspr r6, \srr1
PPC_LL r4, GPR11(r8)
- PPC_STL r7, VCPU_GPR(r7)(r11)
- PPC_STL r3, VCPU_GPR(r10)(r11)
+ PPC_STL r7, VCPU_GPR(R7)(r11)
+ PPC_STL r3, VCPU_GPR(R10)(r11)
mfctr r7
- PPC_STL r12, VCPU_GPR(r12)(r11)
- PPC_STL r13, VCPU_GPR(r13)(r11)
- PPC_STL r4, VCPU_GPR(r11)(r11)
+ PPC_STL r12, VCPU_GPR(R12)(r11)
+ PPC_STL r13, VCPU_GPR(R13)(r11)
+ PPC_STL r4, VCPU_GPR(R11)(r11)
PPC_STL r7, VCPU_CTR(r11)
mr r4, r11
kvm_handler_common \intno, \srr0, \flags
@@ -310,7 +305,7 @@
_GLOBAL(kvmppc_resume_host)
/* Save remaining volatile guest register state to vcpu. */
mfspr r3, SPRN_VRSAVE
- PPC_STL r0, VCPU_GPR(r0)(r4)
+ PPC_STL r0, VCPU_GPR(R0)(r4)
mflr r5
mfspr r6, SPRN_SPRG4
PPC_STL r5, VCPU_LR(r4)
@@ -358,27 +353,27 @@
/* Restore vcpu pointer and the nonvolatiles we used. */
mr r4, r14
- PPC_LL r14, VCPU_GPR(r14)(r4)
+ PPC_LL r14, VCPU_GPR(R14)(r4)
andi. r5, r3, RESUME_FLAG_NV
beq skip_nv_load
- PPC_LL r15, VCPU_GPR(r15)(r4)
- PPC_LL r16, VCPU_GPR(r16)(r4)
- PPC_LL r17, VCPU_GPR(r17)(r4)
- PPC_LL r18, VCPU_GPR(r18)(r4)
- PPC_LL r19, VCPU_GPR(r19)(r4)
- PPC_LL r20, VCPU_GPR(r20)(r4)
- PPC_LL r21, VCPU_GPR(r21)(r4)
- PPC_LL r22, VCPU_GPR(r22)(r4)
- PPC_LL r23, VCPU_GPR(r23)(r4)
- PPC_LL r24, VCPU_GPR(r24)(r4)
- PPC_LL r25, VCPU_GPR(r25)(r4)
- PPC_LL r26, VCPU_GPR(r26)(r4)
- PPC_LL r27, VCPU_GPR(r27)(r4)
- PPC_LL r28, VCPU_GPR(r28)(r4)
- PPC_LL r29, VCPU_GPR(r29)(r4)
- PPC_LL r30, VCPU_GPR(r30)(r4)
- PPC_LL r31, VCPU_GPR(r31)(r4)
+ PPC_LL r15, VCPU_GPR(R15)(r4)
+ PPC_LL r16, VCPU_GPR(R16)(r4)
+ PPC_LL r17, VCPU_GPR(R17)(r4)
+ PPC_LL r18, VCPU_GPR(R18)(r4)
+ PPC_LL r19, VCPU_GPR(R19)(r4)
+ PPC_LL r20, VCPU_GPR(R20)(r4)
+ PPC_LL r21, VCPU_GPR(R21)(r4)
+ PPC_LL r22, VCPU_GPR(R22)(r4)
+ PPC_LL r23, VCPU_GPR(R23)(r4)
+ PPC_LL r24, VCPU_GPR(R24)(r4)
+ PPC_LL r25, VCPU_GPR(R25)(r4)
+ PPC_LL r26, VCPU_GPR(R26)(r4)
+ PPC_LL r27, VCPU_GPR(R27)(r4)
+ PPC_LL r28, VCPU_GPR(R28)(r4)
+ PPC_LL r29, VCPU_GPR(R29)(r4)
+ PPC_LL r30, VCPU_GPR(R30)(r4)
+ PPC_LL r31, VCPU_GPR(R31)(r4)
skip_nv_load:
/* Should we return to the guest? */
andi. r5, r3, RESUME_FLAG_HOST
@@ -396,23 +391,23 @@
* non-volatiles.
*/
- PPC_STL r15, VCPU_GPR(r15)(r4)
- PPC_STL r16, VCPU_GPR(r16)(r4)
- PPC_STL r17, VCPU_GPR(r17)(r4)
- PPC_STL r18, VCPU_GPR(r18)(r4)
- PPC_STL r19, VCPU_GPR(r19)(r4)
- PPC_STL r20, VCPU_GPR(r20)(r4)
- PPC_STL r21, VCPU_GPR(r21)(r4)
- PPC_STL r22, VCPU_GPR(r22)(r4)
- PPC_STL r23, VCPU_GPR(r23)(r4)
- PPC_STL r24, VCPU_GPR(r24)(r4)
- PPC_STL r25, VCPU_GPR(r25)(r4)
- PPC_STL r26, VCPU_GPR(r26)(r4)
- PPC_STL r27, VCPU_GPR(r27)(r4)
- PPC_STL r28, VCPU_GPR(r28)(r4)
- PPC_STL r29, VCPU_GPR(r29)(r4)
- PPC_STL r30, VCPU_GPR(r30)(r4)
- PPC_STL r31, VCPU_GPR(r31)(r4)
+ PPC_STL r15, VCPU_GPR(R15)(r4)
+ PPC_STL r16, VCPU_GPR(R16)(r4)
+ PPC_STL r17, VCPU_GPR(R17)(r4)
+ PPC_STL r18, VCPU_GPR(R18)(r4)
+ PPC_STL r19, VCPU_GPR(R19)(r4)
+ PPC_STL r20, VCPU_GPR(R20)(r4)
+ PPC_STL r21, VCPU_GPR(R21)(r4)
+ PPC_STL r22, VCPU_GPR(R22)(r4)
+ PPC_STL r23, VCPU_GPR(R23)(r4)
+ PPC_STL r24, VCPU_GPR(R24)(r4)
+ PPC_STL r25, VCPU_GPR(R25)(r4)
+ PPC_STL r26, VCPU_GPR(R26)(r4)
+ PPC_STL r27, VCPU_GPR(R27)(r4)
+ PPC_STL r28, VCPU_GPR(R28)(r4)
+ PPC_STL r29, VCPU_GPR(R29)(r4)
+ PPC_STL r30, VCPU_GPR(R30)(r4)
+ PPC_STL r31, VCPU_GPR(R31)(r4)
/* Load host non-volatile register state from host stack. */
PPC_LL r14, HOST_NV_GPR(r14)(r1)
@@ -478,24 +473,24 @@
PPC_STL r31, HOST_NV_GPR(r31)(r1)
/* Load guest non-volatiles. */
- PPC_LL r14, VCPU_GPR(r14)(r4)
- PPC_LL r15, VCPU_GPR(r15)(r4)
- PPC_LL r16, VCPU_GPR(r16)(r4)
- PPC_LL r17, VCPU_GPR(r17)(r4)
- PPC_LL r18, VCPU_GPR(r18)(r4)
- PPC_LL r19, VCPU_GPR(r19)(r4)
- PPC_LL r20, VCPU_GPR(r20)(r4)
- PPC_LL r21, VCPU_GPR(r21)(r4)
- PPC_LL r22, VCPU_GPR(r22)(r4)
- PPC_LL r23, VCPU_GPR(r23)(r4)
- PPC_LL r24, VCPU_GPR(r24)(r4)
- PPC_LL r25, VCPU_GPR(r25)(r4)
- PPC_LL r26, VCPU_GPR(r26)(r4)
- PPC_LL r27, VCPU_GPR(r27)(r4)
- PPC_LL r28, VCPU_GPR(r28)(r4)
- PPC_LL r29, VCPU_GPR(r29)(r4)
- PPC_LL r30, VCPU_GPR(r30)(r4)
- PPC_LL r31, VCPU_GPR(r31)(r4)
+ PPC_LL r14, VCPU_GPR(R14)(r4)
+ PPC_LL r15, VCPU_GPR(R15)(r4)
+ PPC_LL r16, VCPU_GPR(R16)(r4)
+ PPC_LL r17, VCPU_GPR(R17)(r4)
+ PPC_LL r18, VCPU_GPR(R18)(r4)
+ PPC_LL r19, VCPU_GPR(R19)(r4)
+ PPC_LL r20, VCPU_GPR(R20)(r4)
+ PPC_LL r21, VCPU_GPR(R21)(r4)
+ PPC_LL r22, VCPU_GPR(R22)(r4)
+ PPC_LL r23, VCPU_GPR(R23)(r4)
+ PPC_LL r24, VCPU_GPR(R24)(r4)
+ PPC_LL r25, VCPU_GPR(R25)(r4)
+ PPC_LL r26, VCPU_GPR(R26)(r4)
+ PPC_LL r27, VCPU_GPR(R27)(r4)
+ PPC_LL r28, VCPU_GPR(R28)(r4)
+ PPC_LL r29, VCPU_GPR(R29)(r4)
+ PPC_LL r30, VCPU_GPR(R30)(r4)
+ PPC_LL r31, VCPU_GPR(R31)(r4)
lightweight_exit:
@@ -554,13 +549,13 @@
lwz r7, VCPU_CR(r4)
PPC_LL r8, VCPU_PC(r4)
PPC_LD(r9, VCPU_SHARED_MSR, r11)
- PPC_LL r0, VCPU_GPR(r0)(r4)
- PPC_LL r1, VCPU_GPR(r1)(r4)
- PPC_LL r2, VCPU_GPR(r2)(r4)
- PPC_LL r10, VCPU_GPR(r10)(r4)
- PPC_LL r11, VCPU_GPR(r11)(r4)
- PPC_LL r12, VCPU_GPR(r12)(r4)
- PPC_LL r13, VCPU_GPR(r13)(r4)
+ PPC_LL r0, VCPU_GPR(R0)(r4)
+ PPC_LL r1, VCPU_GPR(R1)(r4)
+ PPC_LL r2, VCPU_GPR(R2)(r4)
+ PPC_LL r10, VCPU_GPR(R10)(r4)
+ PPC_LL r11, VCPU_GPR(R11)(r4)
+ PPC_LL r12, VCPU_GPR(R12)(r4)
+ PPC_LL r13, VCPU_GPR(R13)(r4)
mtlr r3
mtxer r5
mtctr r6
@@ -586,12 +581,12 @@
mtcr r7
/* Finish loading guest volatiles and jump to guest. */
- PPC_LL r5, VCPU_GPR(r5)(r4)
- PPC_LL r6, VCPU_GPR(r6)(r4)
- PPC_LL r7, VCPU_GPR(r7)(r4)
- PPC_LL r8, VCPU_GPR(r8)(r4)
- PPC_LL r9, VCPU_GPR(r9)(r4)
+ PPC_LL r5, VCPU_GPR(R5)(r4)
+ PPC_LL r6, VCPU_GPR(R6)(r4)
+ PPC_LL r7, VCPU_GPR(R7)(r4)
+ PPC_LL r8, VCPU_GPR(R8)(r4)
+ PPC_LL r9, VCPU_GPR(R9)(r4)
- PPC_LL r3, VCPU_GPR(r3)(r4)
- PPC_LL r4, VCPU_GPR(r4)(r4)
+ PPC_LL r3, VCPU_GPR(R3)(r4)
+ PPC_LL r4, VCPU_GPR(R4)(r4)
rfi
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 7735a2c..746e0c8 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -17,14 +17,15 @@
obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \
memcpy_64.o usercopy_64.o mem_64.o string.o \
checksum_wrappers_64.o hweight_64.o \
- copyuser_power7.o
+ copyuser_power7.o string_64.o copypage_power7.o \
+ memcpy_power7.o
obj-$(CONFIG_XMON) += sstep.o ldstfp.o
obj-$(CONFIG_KPROBES) += sstep.o ldstfp.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += sstep.o ldstfp.o
ifeq ($(CONFIG_PPC64),y)
obj-$(CONFIG_SMP) += locks.o
-obj-$(CONFIG_ALTIVEC) += copyuser_power7_vmx.o
+obj-$(CONFIG_ALTIVEC) += vmx-helper.o
endif
obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o
diff --git a/arch/powerpc/lib/checksum_64.S b/arch/powerpc/lib/checksum_64.S
index 18245af..167f7255 100644
--- a/arch/powerpc/lib/checksum_64.S
+++ b/arch/powerpc/lib/checksum_64.S
@@ -65,9 +65,6 @@
srwi r3,r3,16
blr
-#define STACKFRAMESIZE 256
-#define STK_REG(i) (112 + ((i)-14)*8)
-
/*
* Computes the checksum of a memory block at buff, length len,
* and adds in "sum" (32-bit).
@@ -114,9 +111,9 @@
mtctr r6
stdu r1,-STACKFRAMESIZE(r1)
- std r14,STK_REG(r14)(r1)
- std r15,STK_REG(r15)(r1)
- std r16,STK_REG(r16)(r1)
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
ld r6,0(r3)
ld r9,8(r3)
@@ -175,9 +172,9 @@
adde r0,r0,r15
adde r0,r0,r16
- ld r14,STK_REG(r14)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r16,STK_REG(r16)(r1)
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
addi r1,r1,STACKFRAMESIZE
andi. r4,r4,63
@@ -299,9 +296,9 @@
mtctr r6
stdu r1,-STACKFRAMESIZE(r1)
- std r14,STK_REG(r14)(r1)
- std r15,STK_REG(r15)(r1)
- std r16,STK_REG(r16)(r1)
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
source; ld r6,0(r3)
source; ld r9,8(r3)
@@ -382,9 +379,9 @@
adde r0,r0,r15
adde r0,r0,r16
- ld r14,STK_REG(r14)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r16,STK_REG(r16)(r1)
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
addi r1,r1,STACKFRAMESIZE
andi. r5,r5,63
diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c
index 7c975d4..dd223b3 100644
--- a/arch/powerpc/lib/code-patching.c
+++ b/arch/powerpc/lib/code-patching.c
@@ -13,17 +13,23 @@
#include <linux/mm.h>
#include <asm/page.h>
#include <asm/code-patching.h>
+#include <asm/uaccess.h>
-void patch_instruction(unsigned int *addr, unsigned int instr)
+int patch_instruction(unsigned int *addr, unsigned int instr)
{
- *addr = instr;
+ int err;
+
+ err = __put_user(instr, addr);
+ if (err)
+ return err;
asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (addr));
+ return 0;
}
-void patch_branch(unsigned int *addr, unsigned long target, int flags)
+int patch_branch(unsigned int *addr, unsigned long target, int flags)
{
- patch_instruction(addr, create_branch(addr, target, flags));
+ return patch_instruction(addr, create_branch(addr, target, flags));
}
unsigned int create_branch(const unsigned int *addr,
diff --git a/arch/powerpc/lib/copypage_64.S b/arch/powerpc/lib/copypage_64.S
index 53dcb6b..9f9434a 100644
--- a/arch/powerpc/lib/copypage_64.S
+++ b/arch/powerpc/lib/copypage_64.S
@@ -17,7 +17,11 @@
.section ".text"
_GLOBAL(copy_page)
+BEGIN_FTR_SECTION
lis r5,PAGE_SIZE@h
+FTR_SECTION_ELSE
+ b .copypage_power7
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_VMX_COPY)
ori r5,r5,PAGE_SIZE@l
BEGIN_FTR_SECTION
ld r10,PPC64_CACHES@toc(r2)
diff --git a/arch/powerpc/lib/copypage_power7.S b/arch/powerpc/lib/copypage_power7.S
new file mode 100644
index 0000000..0ef75bf
--- /dev/null
+++ b/arch/powerpc/lib/copypage_power7.S
@@ -0,0 +1,165 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2012
+ *
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ */
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+
+_GLOBAL(copypage_power7)
+ /*
+ * We prefetch both the source and destination using enhanced touch
+ * instructions. We use a stream ID of 0 for the load side and
+ * 1 for the store side. Since source and destination are page
+ * aligned we don't need to clear the bottom 7 bits of either
+ * address.
+ */
+ ori r9,r3,1 /* stream=1 */
+
+#ifdef CONFIG_PPC_64K_PAGES
+ lis r7,0x0E01 /* depth=7, units=512 */
+#else
+ lis r7,0x0E00 /* depth=7 */
+ ori r7,r7,0x1000 /* units=32 */
+#endif
+ ori r10,r7,1 /* stream=1 */
+
+ lis r8,0x8000 /* GO=1 */
+ clrldi r8,r8,32
+
+.machine push
+.machine "power4"
+ dcbt r0,r4,0b01000
+ dcbt r0,r7,0b01010
+ dcbtst r0,r9,0b01000
+ dcbtst r0,r10,0b01010
+ eieio
+ dcbt r0,r8,0b01010 /* GO */
+.machine pop
+
+#ifdef CONFIG_ALTIVEC
+ mflr r0
+ std r3,48(r1)
+ std r4,56(r1)
+ std r0,16(r1)
+ stdu r1,-STACKFRAMESIZE(r1)
+ bl .enter_vmx_copy
+ cmpwi r3,0
+ ld r0,STACKFRAMESIZE+16(r1)
+ ld r3,STACKFRAMESIZE+48(r1)
+ ld r4,STACKFRAMESIZE+56(r1)
+ mtlr r0
+
+ li r0,(PAGE_SIZE/128)
+ mtctr r0
+
+ beq .Lnonvmx_copy
+
+ addi r1,r1,STACKFRAMESIZE
+
+ li r6,16
+ li r7,32
+ li r8,48
+ li r9,64
+ li r10,80
+ li r11,96
+ li r12,112
+
+ .align 5
+1: lvx vr7,r0,r4
+ lvx vr6,r4,r6
+ lvx vr5,r4,r7
+ lvx vr4,r4,r8
+ lvx vr3,r4,r9
+ lvx vr2,r4,r10
+ lvx vr1,r4,r11
+ lvx vr0,r4,r12
+ addi r4,r4,128
+ stvx vr7,r0,r3
+ stvx vr6,r3,r6
+ stvx vr5,r3,r7
+ stvx vr4,r3,r8
+ stvx vr3,r3,r9
+ stvx vr2,r3,r10
+ stvx vr1,r3,r11
+ stvx vr0,r3,r12
+ addi r3,r3,128
+ bdnz 1b
+
+ b .exit_vmx_copy /* tail call optimise */
+
+#else
+ li r0,(PAGE_SIZE/128)
+ mtctr r0
+
+ stdu r1,-STACKFRAMESIZE(r1)
+#endif
+
+.Lnonvmx_copy:
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
+ std r17,STK_REG(R17)(r1)
+ std r18,STK_REG(R18)(r1)
+ std r19,STK_REG(R19)(r1)
+ std r20,STK_REG(R20)(r1)
+
+1: ld r0,0(r4)
+ ld r5,8(r4)
+ ld r6,16(r4)
+ ld r7,24(r4)
+ ld r8,32(r4)
+ ld r9,40(r4)
+ ld r10,48(r4)
+ ld r11,56(r4)
+ ld r12,64(r4)
+ ld r14,72(r4)
+ ld r15,80(r4)
+ ld r16,88(r4)
+ ld r17,96(r4)
+ ld r18,104(r4)
+ ld r19,112(r4)
+ ld r20,120(r4)
+ addi r4,r4,128
+ std r0,0(r3)
+ std r5,8(r3)
+ std r6,16(r3)
+ std r7,24(r3)
+ std r8,32(r3)
+ std r9,40(r3)
+ std r10,48(r3)
+ std r11,56(r3)
+ std r12,64(r3)
+ std r14,72(r3)
+ std r15,80(r3)
+ std r16,88(r3)
+ std r17,96(r3)
+ std r18,104(r3)
+ std r19,112(r3)
+ std r20,120(r3)
+ addi r3,r3,128
+ bdnz 1b
+
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
+ ld r17,STK_REG(R17)(r1)
+ ld r18,STK_REG(R18)(r1)
+ ld r19,STK_REG(R19)(r1)
+ ld r20,STK_REG(R20)(r1)
+ addi r1,r1,STACKFRAMESIZE
+ blr
diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S
index 497db7b..f9ede7c 100644
--- a/arch/powerpc/lib/copyuser_power7.S
+++ b/arch/powerpc/lib/copyuser_power7.S
@@ -19,9 +19,6 @@
*/
#include <asm/ppc_asm.h>
-#define STACKFRAMESIZE 256
-#define STK_REG(i) (112 + ((i)-14)*8)
-
.macro err1
100:
.section __ex_table,"a"
@@ -57,26 +54,26 @@
.Ldo_err4:
- ld r16,STK_REG(r16)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r14,STK_REG(r14)(r1)
+ ld r16,STK_REG(R16)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r14,STK_REG(R14)(r1)
.Ldo_err3:
- bl .exit_vmx_copy
+ bl .exit_vmx_usercopy
ld r0,STACKFRAMESIZE+16(r1)
mtlr r0
b .Lexit
#endif /* CONFIG_ALTIVEC */
.Ldo_err2:
- ld r22,STK_REG(r22)(r1)
- ld r21,STK_REG(r21)(r1)
- ld r20,STK_REG(r20)(r1)
- ld r19,STK_REG(r19)(r1)
- ld r18,STK_REG(r18)(r1)
- ld r17,STK_REG(r17)(r1)
- ld r16,STK_REG(r16)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r14,STK_REG(r14)(r1)
+ ld r22,STK_REG(R22)(r1)
+ ld r21,STK_REG(R21)(r1)
+ ld r20,STK_REG(R20)(r1)
+ ld r19,STK_REG(R19)(r1)
+ ld r18,STK_REG(R18)(r1)
+ ld r17,STK_REG(R17)(r1)
+ ld r16,STK_REG(R16)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r14,STK_REG(R14)(r1)
.Lexit:
addi r1,r1,STACKFRAMESIZE
.Ldo_err1:
@@ -137,15 +134,15 @@
mflr r0
stdu r1,-STACKFRAMESIZE(r1)
- std r14,STK_REG(r14)(r1)
- std r15,STK_REG(r15)(r1)
- std r16,STK_REG(r16)(r1)
- std r17,STK_REG(r17)(r1)
- std r18,STK_REG(r18)(r1)
- std r19,STK_REG(r19)(r1)
- std r20,STK_REG(r20)(r1)
- std r21,STK_REG(r21)(r1)
- std r22,STK_REG(r22)(r1)
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
+ std r17,STK_REG(R17)(r1)
+ std r18,STK_REG(R18)(r1)
+ std r19,STK_REG(R19)(r1)
+ std r20,STK_REG(R20)(r1)
+ std r21,STK_REG(R21)(r1)
+ std r22,STK_REG(R22)(r1)
std r0,STACKFRAMESIZE+16(r1)
srdi r6,r5,7
@@ -192,15 +189,15 @@
clrldi r5,r5,(64-7)
- ld r14,STK_REG(r14)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r16,STK_REG(r16)(r1)
- ld r17,STK_REG(r17)(r1)
- ld r18,STK_REG(r18)(r1)
- ld r19,STK_REG(r19)(r1)
- ld r20,STK_REG(r20)(r1)
- ld r21,STK_REG(r21)(r1)
- ld r22,STK_REG(r22)(r1)
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
+ ld r17,STK_REG(R17)(r1)
+ ld r18,STK_REG(R18)(r1)
+ ld r19,STK_REG(R19)(r1)
+ ld r20,STK_REG(R20)(r1)
+ ld r21,STK_REG(R21)(r1)
+ ld r22,STK_REG(R22)(r1)
addi r1,r1,STACKFRAMESIZE
/* Up to 127B to go */
@@ -290,7 +287,7 @@
mflr r0
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
- bl .enter_vmx_copy
+ bl .enter_vmx_usercopy
cmpwi r3,0
ld r0,STACKFRAMESIZE+16(r1)
ld r3,STACKFRAMESIZE+48(r1)
@@ -298,6 +295,68 @@
ld r5,STACKFRAMESIZE+64(r1)
mtlr r0
+ /*
+ * We prefetch both the source and destination using enhanced touch
+ * instructions. We use a stream ID of 0 for the load side and
+ * 1 for the store side.
+ */
+ clrrdi r6,r4,7
+ clrrdi r9,r3,7
+ ori r9,r9,1 /* stream=1 */
+
+ srdi r7,r5,7 /* length in cachelines, capped at 0x3FF */
+ cmpldi r7,0x3FF
+ ble 1f
+ li r7,0x3FF
+1: lis r0,0x0E00 /* depth=7 */
+ sldi r7,r7,7
+ or r7,r7,r0
+ ori r10,r7,1 /* stream=1 */
+
+ lis r8,0x8000 /* GO=1 */
+ clrldi r8,r8,32
+
+.machine push
+.machine "power4"
+ dcbt r0,r6,0b01000
+ dcbt r0,r7,0b01010
+ dcbtst r0,r9,0b01000
+ dcbtst r0,r10,0b01010
+ eieio
+ dcbt r0,r8,0b01010 /* GO */
+.machine pop
+
+ /*
+ * We prefetch both the source and destination using enhanced touch
+ * instructions. We use a stream ID of 0 for the load side and
+ * 1 for the store side.
+ */
+ clrrdi r6,r4,7
+ clrrdi r9,r3,7
+ ori r9,r9,1 /* stream=1 */
+
+ srdi r7,r5,7 /* length in cachelines, capped at 0x3FF */
+ cmpldi cr1,r7,0x3FF
+ ble cr1,1f
+ li r7,0x3FF
+1: lis r0,0x0E00 /* depth=7 */
+ sldi r7,r7,7
+ or r7,r7,r0
+ ori r10,r7,1 /* stream=1 */
+
+ lis r8,0x8000 /* GO=1 */
+ clrldi r8,r8,32
+
+.machine push
+.machine "power4"
+ dcbt r0,r6,0b01000
+ dcbt r0,r7,0b01010
+ dcbtst r0,r9,0b01000
+ dcbtst r0,r10,0b01010
+ eieio
+ dcbt r0,r8,0b01010 /* GO */
+.machine pop
+
beq .Lunwind_stack_nonvmx_copy
/*
@@ -378,9 +437,9 @@
7: sub r5,r5,r6
srdi r6,r5,7
- std r14,STK_REG(r14)(r1)
- std r15,STK_REG(r15)(r1)
- std r16,STK_REG(r16)(r1)
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
li r12,64
li r14,80
@@ -415,9 +474,9 @@
addi r3,r3,128
bdnz 8b
- ld r14,STK_REG(r14)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r16,STK_REG(r16)(r1)
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
/* Up to 127B to go */
clrldi r5,r5,(64-7)
@@ -476,7 +535,7 @@
err3; stb r0,0(r3)
15: addi r1,r1,STACKFRAMESIZE
- b .exit_vmx_copy /* tail call optimise */
+ b .exit_vmx_usercopy /* tail call optimise */
.Lvmx_unaligned_copy:
/* Get the destination 16B aligned */
@@ -563,9 +622,9 @@
7: sub r5,r5,r6
srdi r6,r5,7
- std r14,STK_REG(r14)(r1)
- std r15,STK_REG(r15)(r1)
- std r16,STK_REG(r16)(r1)
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
li r12,64
li r14,80
@@ -608,9 +667,9 @@
addi r3,r3,128
bdnz 8b
- ld r14,STK_REG(r14)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r16,STK_REG(r16)(r1)
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
/* Up to 127B to go */
clrldi r5,r5,(64-7)
@@ -679,5 +738,5 @@
err3; stb r0,0(r3)
15: addi r1,r1,STACKFRAMESIZE
- b .exit_vmx_copy /* tail call optimise */
+ b .exit_vmx_usercopy /* tail call optimise */
#endif /* CONFiG_ALTIVEC */
diff --git a/arch/powerpc/lib/crtsavres.S b/arch/powerpc/lib/crtsavres.S
index 1c893f0..b2c68ce 100644
--- a/arch/powerpc/lib/crtsavres.S
+++ b/arch/powerpc/lib/crtsavres.S
@@ -41,12 +41,13 @@
#include <asm/ppc_asm.h>
.file "crtsavres.S"
- .section ".text"
#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
#ifndef CONFIG_PPC64
+ .section ".text"
+
/* Routines for saving integer registers, called by the compiler. */
/* Called with r11 pointing to the stack header word of the caller of the */
/* function, just beyond the end of the integer save area. */
@@ -232,6 +233,8 @@
#else /* CONFIG_PPC64 */
+ .section ".text.save.restore","ax",@progbits
+
.globl _savegpr0_14
_savegpr0_14:
std r14,-144(r1)
diff --git a/arch/powerpc/lib/hweight_64.S b/arch/powerpc/lib/hweight_64.S
index fda2786..9b96ff2 100644
--- a/arch/powerpc/lib/hweight_64.S
+++ b/arch/powerpc/lib/hweight_64.S
@@ -28,7 +28,7 @@
nop
nop
FTR_SECTION_ELSE
- PPC_POPCNTB(r3,r3)
+ PPC_POPCNTB(R3,R3)
clrldi r3,r3,64-8
blr
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_POPCNTB)
@@ -42,14 +42,14 @@
nop
FTR_SECTION_ELSE
BEGIN_FTR_SECTION_NESTED(50)
- PPC_POPCNTB(r3,r3)
+ PPC_POPCNTB(R3,R3)
srdi r4,r3,8
add r3,r4,r3
clrldi r3,r3,64-8
blr
FTR_SECTION_ELSE_NESTED(50)
clrlwi r3,r3,16
- PPC_POPCNTW(r3,r3)
+ PPC_POPCNTW(R3,R3)
clrldi r3,r3,64-8
blr
ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_POPCNTD, 50)
@@ -66,7 +66,7 @@
nop
FTR_SECTION_ELSE
BEGIN_FTR_SECTION_NESTED(51)
- PPC_POPCNTB(r3,r3)
+ PPC_POPCNTB(R3,R3)
srdi r4,r3,16
add r3,r4,r3
srdi r4,r3,8
@@ -74,7 +74,7 @@
clrldi r3,r3,64-8
blr
FTR_SECTION_ELSE_NESTED(51)
- PPC_POPCNTW(r3,r3)
+ PPC_POPCNTW(R3,R3)
clrldi r3,r3,64-8
blr
ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_POPCNTD, 51)
@@ -93,7 +93,7 @@
nop
FTR_SECTION_ELSE
BEGIN_FTR_SECTION_NESTED(52)
- PPC_POPCNTB(r3,r3)
+ PPC_POPCNTB(R3,R3)
srdi r4,r3,32
add r3,r4,r3
srdi r4,r3,16
@@ -103,7 +103,7 @@
clrldi r3,r3,64-8
blr
FTR_SECTION_ELSE_NESTED(52)
- PPC_POPCNTD(r3,r3)
+ PPC_POPCNTD(R3,R3)
clrldi r3,r3,64-8
blr
ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_POPCNTD, 52)
diff --git a/arch/powerpc/lib/ldstfp.S b/arch/powerpc/lib/ldstfp.S
index 6a85380..85aec08 100644
--- a/arch/powerpc/lib/ldstfp.S
+++ b/arch/powerpc/lib/ldstfp.S
@@ -330,13 +330,13 @@
MTMSRD(r7)
isync
beq cr7,1f
- STXVD2X(0,r1,r8)
+ STXVD2X(0,R1,R8)
1: li r9,-EFAULT
-2: LXVD2X(0,0,r4)
+2: LXVD2X(0,R0,R4)
li r9,0
3: beq cr7,4f
bl put_vsr
- LXVD2X(0,r1,r8)
+ LXVD2X(0,R1,R8)
4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1)
mtlr r0
MTMSRD(r6)
@@ -358,13 +358,13 @@
MTMSRD(r7)
isync
beq cr7,1f
- STXVD2X(0,r1,r8)
+ STXVD2X(0,R1,R8)
bl get_vsr
1: li r9,-EFAULT
-2: STXVD2X(0,0,r4)
+2: STXVD2X(0,R0,R4)
li r9,0
3: beq cr7,4f
- LXVD2X(0,r1,r8)
+ LXVD2X(0,R1,R8)
4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1)
mtlr r0
MTMSRD(r6)
diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S
index 82fea39..d2bbbc8 100644
--- a/arch/powerpc/lib/memcpy_64.S
+++ b/arch/powerpc/lib/memcpy_64.S
@@ -11,7 +11,11 @@
.align 7
_GLOBAL(memcpy)
+BEGIN_FTR_SECTION
std r3,48(r1) /* save destination pointer for return value */
+FTR_SECTION_ELSE
+ b memcpy_power7
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_VMX_COPY)
PPC_MTOCRF(0x01,r5)
cmpldi cr1,r5,16
neg r6,r3 # LS 3 bits = # bytes to 8-byte dest bdry
diff --git a/arch/powerpc/lib/memcpy_power7.S b/arch/powerpc/lib/memcpy_power7.S
new file mode 100644
index 0000000..0efdc51
--- /dev/null
+++ b/arch/powerpc/lib/memcpy_power7.S
@@ -0,0 +1,647 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2012
+ *
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ */
+#include <asm/ppc_asm.h>
+
+_GLOBAL(memcpy_power7)
+#ifdef CONFIG_ALTIVEC
+ cmpldi r5,16
+ cmpldi cr1,r5,4096
+
+ std r3,48(r1)
+
+ blt .Lshort_copy
+ bgt cr1,.Lvmx_copy
+#else
+ cmpldi r5,16
+
+ std r3,48(r1)
+
+ blt .Lshort_copy
+#endif
+
+.Lnonvmx_copy:
+ /* Get the source 8B aligned */
+ neg r6,r4
+ mtocrf 0x01,r6
+ clrldi r6,r6,(64-3)
+
+ bf cr7*4+3,1f
+ lbz r0,0(r4)
+ addi r4,r4,1
+ stb r0,0(r3)
+ addi r3,r3,1
+
+1: bf cr7*4+2,2f
+ lhz r0,0(r4)
+ addi r4,r4,2
+ sth r0,0(r3)
+ addi r3,r3,2
+
+2: bf cr7*4+1,3f
+ lwz r0,0(r4)
+ addi r4,r4,4
+ stw r0,0(r3)
+ addi r3,r3,4
+
+3: sub r5,r5,r6
+ cmpldi r5,128
+ blt 5f
+
+ mflr r0
+ stdu r1,-STACKFRAMESIZE(r1)
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
+ std r17,STK_REG(R17)(r1)
+ std r18,STK_REG(R18)(r1)
+ std r19,STK_REG(R19)(r1)
+ std r20,STK_REG(R20)(r1)
+ std r21,STK_REG(R21)(r1)
+ std r22,STK_REG(R22)(r1)
+ std r0,STACKFRAMESIZE+16(r1)
+
+ srdi r6,r5,7
+ mtctr r6
+
+ /* Now do cacheline (128B) sized loads and stores. */
+ .align 5
+4:
+ ld r0,0(r4)
+ ld r6,8(r4)
+ ld r7,16(r4)
+ ld r8,24(r4)
+ ld r9,32(r4)
+ ld r10,40(r4)
+ ld r11,48(r4)
+ ld r12,56(r4)
+ ld r14,64(r4)
+ ld r15,72(r4)
+ ld r16,80(r4)
+ ld r17,88(r4)
+ ld r18,96(r4)
+ ld r19,104(r4)
+ ld r20,112(r4)
+ ld r21,120(r4)
+ addi r4,r4,128
+ std r0,0(r3)
+ std r6,8(r3)
+ std r7,16(r3)
+ std r8,24(r3)
+ std r9,32(r3)
+ std r10,40(r3)
+ std r11,48(r3)
+ std r12,56(r3)
+ std r14,64(r3)
+ std r15,72(r3)
+ std r16,80(r3)
+ std r17,88(r3)
+ std r18,96(r3)
+ std r19,104(r3)
+ std r20,112(r3)
+ std r21,120(r3)
+ addi r3,r3,128
+ bdnz 4b
+
+ clrldi r5,r5,(64-7)
+
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
+ ld r17,STK_REG(R17)(r1)
+ ld r18,STK_REG(R18)(r1)
+ ld r19,STK_REG(R19)(r1)
+ ld r20,STK_REG(R20)(r1)
+ ld r21,STK_REG(R21)(r1)
+ ld r22,STK_REG(R22)(r1)
+ addi r1,r1,STACKFRAMESIZE
+
+ /* Up to 127B to go */
+5: srdi r6,r5,4
+ mtocrf 0x01,r6
+
+6: bf cr7*4+1,7f
+ ld r0,0(r4)
+ ld r6,8(r4)
+ ld r7,16(r4)
+ ld r8,24(r4)
+ ld r9,32(r4)
+ ld r10,40(r4)
+ ld r11,48(r4)
+ ld r12,56(r4)
+ addi r4,r4,64
+ std r0,0(r3)
+ std r6,8(r3)
+ std r7,16(r3)
+ std r8,24(r3)
+ std r9,32(r3)
+ std r10,40(r3)
+ std r11,48(r3)
+ std r12,56(r3)
+ addi r3,r3,64
+
+ /* Up to 63B to go */
+7: bf cr7*4+2,8f
+ ld r0,0(r4)
+ ld r6,8(r4)
+ ld r7,16(r4)
+ ld r8,24(r4)
+ addi r4,r4,32
+ std r0,0(r3)
+ std r6,8(r3)
+ std r7,16(r3)
+ std r8,24(r3)
+ addi r3,r3,32
+
+ /* Up to 31B to go */
+8: bf cr7*4+3,9f
+ ld r0,0(r4)
+ ld r6,8(r4)
+ addi r4,r4,16
+ std r0,0(r3)
+ std r6,8(r3)
+ addi r3,r3,16
+
+9: clrldi r5,r5,(64-4)
+
+ /* Up to 15B to go */
+.Lshort_copy:
+ mtocrf 0x01,r5
+ bf cr7*4+0,12f
+ lwz r0,0(r4) /* Less chance of a reject with word ops */
+ lwz r6,4(r4)
+ addi r4,r4,8
+ stw r0,0(r3)
+ stw r6,4(r3)
+ addi r3,r3,8
+
+12: bf cr7*4+1,13f
+ lwz r0,0(r4)
+ addi r4,r4,4
+ stw r0,0(r3)
+ addi r3,r3,4
+
+13: bf cr7*4+2,14f
+ lhz r0,0(r4)
+ addi r4,r4,2
+ sth r0,0(r3)
+ addi r3,r3,2
+
+14: bf cr7*4+3,15f
+ lbz r0,0(r4)
+ stb r0,0(r3)
+
+15: ld r3,48(r1)
+ blr
+
+.Lunwind_stack_nonvmx_copy:
+ addi r1,r1,STACKFRAMESIZE
+ b .Lnonvmx_copy
+
+#ifdef CONFIG_ALTIVEC
+.Lvmx_copy:
+ mflr r0
+ std r4,56(r1)
+ std r5,64(r1)
+ std r0,16(r1)
+ stdu r1,-STACKFRAMESIZE(r1)
+ bl .enter_vmx_copy
+ cmpwi r3,0
+ ld r0,STACKFRAMESIZE+16(r1)
+ ld r3,STACKFRAMESIZE+48(r1)
+ ld r4,STACKFRAMESIZE+56(r1)
+ ld r5,STACKFRAMESIZE+64(r1)
+ mtlr r0
+
+ /*
+ * We prefetch both the source and destination using enhanced touch
+ * instructions. We use a stream ID of 0 for the load side and
+ * 1 for the store side.
+ */
+ clrrdi r6,r4,7
+ clrrdi r9,r3,7
+ ori r9,r9,1 /* stream=1 */
+
+ srdi r7,r5,7 /* length in cachelines, capped at 0x3FF */
+ cmpldi cr1,r7,0x3FF
+ ble cr1,1f
+ li r7,0x3FF
+1: lis r0,0x0E00 /* depth=7 */
+ sldi r7,r7,7
+ or r7,r7,r0
+ ori r10,r7,1 /* stream=1 */
+
+ lis r8,0x8000 /* GO=1 */
+ clrldi r8,r8,32
+
+.machine push
+.machine "power4"
+ dcbt r0,r6,0b01000
+ dcbt r0,r7,0b01010
+ dcbtst r0,r9,0b01000
+ dcbtst r0,r10,0b01010
+ eieio
+ dcbt r0,r8,0b01010 /* GO */
+.machine pop
+
+ beq .Lunwind_stack_nonvmx_copy
+
+ /*
+ * If source and destination are not relatively aligned we use a
+ * slower permute loop.
+ */
+ xor r6,r4,r3
+ rldicl. r6,r6,0,(64-4)
+ bne .Lvmx_unaligned_copy
+
+ /* Get the destination 16B aligned */
+ neg r6,r3
+ mtocrf 0x01,r6
+ clrldi r6,r6,(64-4)
+
+ bf cr7*4+3,1f
+ lbz r0,0(r4)
+ addi r4,r4,1
+ stb r0,0(r3)
+ addi r3,r3,1
+
+1: bf cr7*4+2,2f
+ lhz r0,0(r4)
+ addi r4,r4,2
+ sth r0,0(r3)
+ addi r3,r3,2
+
+2: bf cr7*4+1,3f
+ lwz r0,0(r4)
+ addi r4,r4,4
+ stw r0,0(r3)
+ addi r3,r3,4
+
+3: bf cr7*4+0,4f
+ ld r0,0(r4)
+ addi r4,r4,8
+ std r0,0(r3)
+ addi r3,r3,8
+
+4: sub r5,r5,r6
+
+ /* Get the desination 128B aligned */
+ neg r6,r3
+ srdi r7,r6,4
+ mtocrf 0x01,r7
+ clrldi r6,r6,(64-7)
+
+ li r9,16
+ li r10,32
+ li r11,48
+
+ bf cr7*4+3,5f
+ lvx vr1,r0,r4
+ addi r4,r4,16
+ stvx vr1,r0,r3
+ addi r3,r3,16
+
+5: bf cr7*4+2,6f
+ lvx vr1,r0,r4
+ lvx vr0,r4,r9
+ addi r4,r4,32
+ stvx vr1,r0,r3
+ stvx vr0,r3,r9
+ addi r3,r3,32
+
+6: bf cr7*4+1,7f
+ lvx vr3,r0,r4
+ lvx vr2,r4,r9
+ lvx vr1,r4,r10
+ lvx vr0,r4,r11
+ addi r4,r4,64
+ stvx vr3,r0,r3
+ stvx vr2,r3,r9
+ stvx vr1,r3,r10
+ stvx vr0,r3,r11
+ addi r3,r3,64
+
+7: sub r5,r5,r6
+ srdi r6,r5,7
+
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
+
+ li r12,64
+ li r14,80
+ li r15,96
+ li r16,112
+
+ mtctr r6
+
+ /*
+ * Now do cacheline sized loads and stores. By this stage the
+ * cacheline stores are also cacheline aligned.
+ */
+ .align 5
+8:
+ lvx vr7,r0,r4
+ lvx vr6,r4,r9
+ lvx vr5,r4,r10
+ lvx vr4,r4,r11
+ lvx vr3,r4,r12
+ lvx vr2,r4,r14
+ lvx vr1,r4,r15
+ lvx vr0,r4,r16
+ addi r4,r4,128
+ stvx vr7,r0,r3
+ stvx vr6,r3,r9
+ stvx vr5,r3,r10
+ stvx vr4,r3,r11
+ stvx vr3,r3,r12
+ stvx vr2,r3,r14
+ stvx vr1,r3,r15
+ stvx vr0,r3,r16
+ addi r3,r3,128
+ bdnz 8b
+
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
+
+ /* Up to 127B to go */
+ clrldi r5,r5,(64-7)
+ srdi r6,r5,4
+ mtocrf 0x01,r6
+
+ bf cr7*4+1,9f
+ lvx vr3,r0,r4
+ lvx vr2,r4,r9
+ lvx vr1,r4,r10
+ lvx vr0,r4,r11
+ addi r4,r4,64
+ stvx vr3,r0,r3
+ stvx vr2,r3,r9
+ stvx vr1,r3,r10
+ stvx vr0,r3,r11
+ addi r3,r3,64
+
+9: bf cr7*4+2,10f
+ lvx vr1,r0,r4
+ lvx vr0,r4,r9
+ addi r4,r4,32
+ stvx vr1,r0,r3
+ stvx vr0,r3,r9
+ addi r3,r3,32
+
+10: bf cr7*4+3,11f
+ lvx vr1,r0,r4
+ addi r4,r4,16
+ stvx vr1,r0,r3
+ addi r3,r3,16
+
+ /* Up to 15B to go */
+11: clrldi r5,r5,(64-4)
+ mtocrf 0x01,r5
+ bf cr7*4+0,12f
+ ld r0,0(r4)
+ addi r4,r4,8
+ std r0,0(r3)
+ addi r3,r3,8
+
+12: bf cr7*4+1,13f
+ lwz r0,0(r4)
+ addi r4,r4,4
+ stw r0,0(r3)
+ addi r3,r3,4
+
+13: bf cr7*4+2,14f
+ lhz r0,0(r4)
+ addi r4,r4,2
+ sth r0,0(r3)
+ addi r3,r3,2
+
+14: bf cr7*4+3,15f
+ lbz r0,0(r4)
+ stb r0,0(r3)
+
+15: addi r1,r1,STACKFRAMESIZE
+ ld r3,48(r1)
+ b .exit_vmx_copy /* tail call optimise */
+
+.Lvmx_unaligned_copy:
+ /* Get the destination 16B aligned */
+ neg r6,r3
+ mtocrf 0x01,r6
+ clrldi r6,r6,(64-4)
+
+ bf cr7*4+3,1f
+ lbz r0,0(r4)
+ addi r4,r4,1
+ stb r0,0(r3)
+ addi r3,r3,1
+
+1: bf cr7*4+2,2f
+ lhz r0,0(r4)
+ addi r4,r4,2
+ sth r0,0(r3)
+ addi r3,r3,2
+
+2: bf cr7*4+1,3f
+ lwz r0,0(r4)
+ addi r4,r4,4
+ stw r0,0(r3)
+ addi r3,r3,4
+
+3: bf cr7*4+0,4f
+ lwz r0,0(r4) /* Less chance of a reject with word ops */
+ lwz r7,4(r4)
+ addi r4,r4,8
+ stw r0,0(r3)
+ stw r7,4(r3)
+ addi r3,r3,8
+
+4: sub r5,r5,r6
+
+ /* Get the desination 128B aligned */
+ neg r6,r3
+ srdi r7,r6,4
+ mtocrf 0x01,r7
+ clrldi r6,r6,(64-7)
+
+ li r9,16
+ li r10,32
+ li r11,48
+
+ lvsl vr16,0,r4 /* Setup permute control vector */
+ lvx vr0,0,r4
+ addi r4,r4,16
+
+ bf cr7*4+3,5f
+ lvx vr1,r0,r4
+ vperm vr8,vr0,vr1,vr16
+ addi r4,r4,16
+ stvx vr8,r0,r3
+ addi r3,r3,16
+ vor vr0,vr1,vr1
+
+5: bf cr7*4+2,6f
+ lvx vr1,r0,r4
+ vperm vr8,vr0,vr1,vr16
+ lvx vr0,r4,r9
+ vperm vr9,vr1,vr0,vr16
+ addi r4,r4,32
+ stvx vr8,r0,r3
+ stvx vr9,r3,r9
+ addi r3,r3,32
+
+6: bf cr7*4+1,7f
+ lvx vr3,r0,r4
+ vperm vr8,vr0,vr3,vr16
+ lvx vr2,r4,r9
+ vperm vr9,vr3,vr2,vr16
+ lvx vr1,r4,r10
+ vperm vr10,vr2,vr1,vr16
+ lvx vr0,r4,r11
+ vperm vr11,vr1,vr0,vr16
+ addi r4,r4,64
+ stvx vr8,r0,r3
+ stvx vr9,r3,r9
+ stvx vr10,r3,r10
+ stvx vr11,r3,r11
+ addi r3,r3,64
+
+7: sub r5,r5,r6
+ srdi r6,r5,7
+
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
+
+ li r12,64
+ li r14,80
+ li r15,96
+ li r16,112
+
+ mtctr r6
+
+ /*
+ * Now do cacheline sized loads and stores. By this stage the
+ * cacheline stores are also cacheline aligned.
+ */
+ .align 5
+8:
+ lvx vr7,r0,r4
+ vperm vr8,vr0,vr7,vr16
+ lvx vr6,r4,r9
+ vperm vr9,vr7,vr6,vr16
+ lvx vr5,r4,r10
+ vperm vr10,vr6,vr5,vr16
+ lvx vr4,r4,r11
+ vperm vr11,vr5,vr4,vr16
+ lvx vr3,r4,r12
+ vperm vr12,vr4,vr3,vr16
+ lvx vr2,r4,r14
+ vperm vr13,vr3,vr2,vr16
+ lvx vr1,r4,r15
+ vperm vr14,vr2,vr1,vr16
+ lvx vr0,r4,r16
+ vperm vr15,vr1,vr0,vr16
+ addi r4,r4,128
+ stvx vr8,r0,r3
+ stvx vr9,r3,r9
+ stvx vr10,r3,r10
+ stvx vr11,r3,r11
+ stvx vr12,r3,r12
+ stvx vr13,r3,r14
+ stvx vr14,r3,r15
+ stvx vr15,r3,r16
+ addi r3,r3,128
+ bdnz 8b
+
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
+
+ /* Up to 127B to go */
+ clrldi r5,r5,(64-7)
+ srdi r6,r5,4
+ mtocrf 0x01,r6
+
+ bf cr7*4+1,9f
+ lvx vr3,r0,r4
+ vperm vr8,vr0,vr3,vr16
+ lvx vr2,r4,r9
+ vperm vr9,vr3,vr2,vr16
+ lvx vr1,r4,r10
+ vperm vr10,vr2,vr1,vr16
+ lvx vr0,r4,r11
+ vperm vr11,vr1,vr0,vr16
+ addi r4,r4,64
+ stvx vr8,r0,r3
+ stvx vr9,r3,r9
+ stvx vr10,r3,r10
+ stvx vr11,r3,r11
+ addi r3,r3,64
+
+9: bf cr7*4+2,10f
+ lvx vr1,r0,r4
+ vperm vr8,vr0,vr1,vr16
+ lvx vr0,r4,r9
+ vperm vr9,vr1,vr0,vr16
+ addi r4,r4,32
+ stvx vr8,r0,r3
+ stvx vr9,r3,r9
+ addi r3,r3,32
+
+10: bf cr7*4+3,11f
+ lvx vr1,r0,r4
+ vperm vr8,vr0,vr1,vr16
+ addi r4,r4,16
+ stvx vr8,r0,r3
+ addi r3,r3,16
+
+ /* Up to 15B to go */
+11: clrldi r5,r5,(64-4)
+ addi r4,r4,-16 /* Unwind the +16 load offset */
+ mtocrf 0x01,r5
+ bf cr7*4+0,12f
+ lwz r0,0(r4) /* Less chance of a reject with word ops */
+ lwz r6,4(r4)
+ addi r4,r4,8
+ stw r0,0(r3)
+ stw r6,4(r3)
+ addi r3,r3,8
+
+12: bf cr7*4+1,13f
+ lwz r0,0(r4)
+ addi r4,r4,4
+ stw r0,0(r3)
+ addi r3,r3,4
+
+13: bf cr7*4+2,14f
+ lhz r0,0(r4)
+ addi r4,r4,2
+ sth r0,0(r3)
+ addi r3,r3,2
+
+14: bf cr7*4+3,15f
+ lbz r0,0(r4)
+ stb r0,0(r3)
+
+15: addi r1,r1,STACKFRAMESIZE
+ ld r3,48(r1)
+ b .exit_vmx_copy /* tail call optimise */
+#endif /* CONFiG_ALTIVEC */
diff --git a/arch/powerpc/lib/string.S b/arch/powerpc/lib/string.S
index 093d631..1b5a0a0 100644
--- a/arch/powerpc/lib/string.S
+++ b/arch/powerpc/lib/string.S
@@ -119,6 +119,7 @@
2: li r3,0
blr
+#ifdef CONFIG_PPC32
_GLOBAL(__clear_user)
addi r6,r3,-4
li r3,0
@@ -160,3 +161,4 @@
PPC_LONG 1b,91b
PPC_LONG 8b,92b
.text
+#endif
diff --git a/arch/powerpc/lib/string_64.S b/arch/powerpc/lib/string_64.S
new file mode 100644
index 0000000..3b1e480
--- /dev/null
+++ b/arch/powerpc/lib/string_64.S
@@ -0,0 +1,202 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2012
+ *
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+ .section ".toc","aw"
+PPC64_CACHES:
+ .tc ppc64_caches[TC],ppc64_caches
+ .section ".text"
+
+/**
+ * __clear_user: - Zero a block of memory in user space, with less checking.
+ * @to: Destination address, in user space.
+ * @n: Number of bytes to zero.
+ *
+ * Zero a block of memory in user space. Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+
+ .macro err1
+100:
+ .section __ex_table,"a"
+ .align 3
+ .llong 100b,.Ldo_err1
+ .previous
+ .endm
+
+ .macro err2
+200:
+ .section __ex_table,"a"
+ .align 3
+ .llong 200b,.Ldo_err2
+ .previous
+ .endm
+
+ .macro err3
+300:
+ .section __ex_table,"a"
+ .align 3
+ .llong 300b,.Ldo_err3
+ .previous
+ .endm
+
+.Ldo_err1:
+ mr r3,r8
+
+.Ldo_err2:
+ mtctr r4
+1:
+err3; stb r0,0(r3)
+ addi r3,r3,1
+ addi r4,r4,-1
+ bdnz 1b
+
+.Ldo_err3:
+ mr r3,r4
+ blr
+
+_GLOBAL(__clear_user)
+ cmpdi r4,32
+ neg r6,r3
+ li r0,0
+ blt .Lshort_clear
+ mr r8,r3
+ mtocrf 0x01,r6
+ clrldi r6,r6,(64-3)
+
+ /* Get the destination 8 byte aligned */
+ bf cr7*4+3,1f
+err1; stb r0,0(r3)
+ addi r3,r3,1
+
+1: bf cr7*4+2,2f
+err1; sth r0,0(r3)
+ addi r3,r3,2
+
+2: bf cr7*4+1,3f
+err1; stw r0,0(r3)
+ addi r3,r3,4
+
+3: sub r4,r4,r6
+
+ cmpdi r4,32
+ cmpdi cr1,r4,512
+ blt .Lshort_clear
+ bgt cr1,.Llong_clear
+
+.Lmedium_clear:
+ srdi r6,r4,5
+ mtctr r6
+
+ /* Do 32 byte chunks */
+4:
+err2; std r0,0(r3)
+err2; std r0,8(r3)
+err2; std r0,16(r3)
+err2; std r0,24(r3)
+ addi r3,r3,32
+ addi r4,r4,-32
+ bdnz 4b
+
+.Lshort_clear:
+ /* up to 31 bytes to go */
+ cmpdi r4,16
+ blt 6f
+err2; std r0,0(r3)
+err2; std r0,8(r3)
+ addi r3,r3,16
+ addi r4,r4,-16
+
+ /* Up to 15 bytes to go */
+6: mr r8,r3
+ clrldi r4,r4,(64-4)
+ mtocrf 0x01,r4
+ bf cr7*4+0,7f
+err1; std r0,0(r3)
+ addi r3,r3,8
+
+7: bf cr7*4+1,8f
+err1; stw r0,0(r3)
+ addi r3,r3,4
+
+8: bf cr7*4+2,9f
+err1; sth r0,0(r3)
+ addi r3,r3,2
+
+9: bf cr7*4+3,10f
+err1; stb r0,0(r3)
+
+10: li r3,0
+ blr
+
+.Llong_clear:
+ ld r5,PPC64_CACHES@toc(r2)
+
+ bf cr7*4+0,11f
+err2; std r0,0(r3)
+ addi r3,r3,8
+ addi r4,r4,-8
+
+ /* Destination is 16 byte aligned, need to get it cacheline aligned */
+11: lwz r7,DCACHEL1LOGLINESIZE(r5)
+ lwz r9,DCACHEL1LINESIZE(r5)
+
+ /*
+ * With worst case alignment the long clear loop takes a minimum
+ * of 1 byte less than 2 cachelines.
+ */
+ sldi r10,r9,2
+ cmpd r4,r10
+ blt .Lmedium_clear
+
+ neg r6,r3
+ addi r10,r9,-1
+ and. r5,r6,r10
+ beq 13f
+
+ srdi r6,r5,4
+ mtctr r6
+ mr r8,r3
+12:
+err1; std r0,0(r3)
+err1; std r0,8(r3)
+ addi r3,r3,16
+ bdnz 12b
+
+ sub r4,r4,r5
+
+13: srd r6,r4,r7
+ mtctr r6
+ mr r8,r3
+14:
+err1; dcbz r0,r3
+ add r3,r3,r9
+ bdnz 14b
+
+ and r4,r4,r10
+
+ cmpdi r4,32
+ blt .Lshort_clear
+ b .Lmedium_clear
diff --git a/arch/powerpc/lib/copyuser_power7_vmx.c b/arch/powerpc/lib/vmx-helper.c
similarity index 79%
rename from arch/powerpc/lib/copyuser_power7_vmx.c
rename to arch/powerpc/lib/vmx-helper.c
index bf2654f2..3cf529c 100644
--- a/arch/powerpc/lib/copyuser_power7_vmx.c
+++ b/arch/powerpc/lib/vmx-helper.c
@@ -22,7 +22,7 @@
#include <linux/hardirq.h>
#include <asm/switch_to.h>
-int enter_vmx_copy(void)
+int enter_vmx_usercopy(void)
{
if (in_interrupt())
return 0;
@@ -44,8 +44,31 @@
* This function must return 0 because we tail call optimise when calling
* from __copy_tofrom_user_power7 which returns 0 on success.
*/
-int exit_vmx_copy(void)
+int exit_vmx_usercopy(void)
{
pagefault_enable();
return 0;
}
+
+int enter_vmx_copy(void)
+{
+ if (in_interrupt())
+ return 0;
+
+ preempt_disable();
+
+ enable_kernel_altivec();
+
+ return 1;
+}
+
+/*
+ * All calls to this function will be optimised into tail calls. We are
+ * passed a pointer to the destination which we return as required by a
+ * memcpy implementation.
+ */
+void *exit_vmx_copy(void *dest)
+{
+ preempt_enable();
+ return dest;
+}
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index b13d589..115347f 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -184,7 +184,7 @@
add r3,r3,r0 /* note create_hpte trims to 24 bits */
#ifdef CONFIG_SMP
- rlwinm r8,r1,0,0,(31-THREAD_SHIFT) /* use cpu number to make tag */
+ CURRENT_THREAD_INFO(r8, r1) /* use cpu number to make tag */
lwz r8,TI_CPU(r8) /* to go in mmu_hash_lock */
oris r8,r8,12
#endif /* CONFIG_SMP */
@@ -545,7 +545,7 @@
#ifdef CONFIG_SMP
addis r9,r7,mmu_hash_lock@ha
addi r9,r9,mmu_hash_lock@l
- rlwinm r8,r1,0,0,(31-THREAD_SHIFT)
+ CURRENT_THREAD_INFO(r8, r1)
add r8,r8,r7
lwz r8,TI_CPU(r8)
oris r8,r8,9
@@ -639,7 +639,7 @@
*/
_GLOBAL(_tlbie)
#ifdef CONFIG_SMP
- rlwinm r8,r1,0,0,(31-THREAD_SHIFT)
+ CURRENT_THREAD_INFO(r8, r1)
lwz r8,TI_CPU(r8)
oris r8,r8,11
mfmsr r10
@@ -677,7 +677,7 @@
*/
_GLOBAL(_tlbia)
#if defined(CONFIG_SMP)
- rlwinm r8,r1,0,0,(31-THREAD_SHIFT)
+ CURRENT_THREAD_INFO(r8, r1)
lwz r8,TI_CPU(r8)
oris r8,r8,10
mfmsr r10
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index a242b5d..602aeb0 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -34,14 +34,6 @@
* | CR save area (SP + 8)
* SP ---> +-- Back chain (SP + 0)
*/
-#define STACKFRAMESIZE 256
-
-/* Save parameters offsets */
-#define STK_PARM(i) (STACKFRAMESIZE + 48 + ((i)-3)*8)
-
-/* Save non-volatile offsets */
-#define STK_REG(i) (112 + ((i)-14)*8)
-
#ifndef CONFIG_PPC_64K_PAGES
@@ -64,9 +56,9 @@
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
/* Save all params that we need after a function call */
- std r6,STK_PARM(r6)(r1)
- std r8,STK_PARM(r8)(r1)
- std r9,STK_PARM(r9)(r1)
+ std r6,STK_PARAM(R6)(r1)
+ std r8,STK_PARAM(R8)(r1)
+ std r9,STK_PARAM(R9)(r1)
/* Save non-volatile registers.
* r31 will hold "old PTE"
@@ -75,11 +67,11 @@
* r28 is a hash value
* r27 is hashtab mask (maybe dynamic patched instead ?)
*/
- std r27,STK_REG(r27)(r1)
- std r28,STK_REG(r28)(r1)
- std r29,STK_REG(r29)(r1)
- std r30,STK_REG(r30)(r1)
- std r31,STK_REG(r31)(r1)
+ std r27,STK_REG(R27)(r1)
+ std r28,STK_REG(R28)(r1)
+ std r29,STK_REG(R29)(r1)
+ std r30,STK_REG(R30)(r1)
+ std r31,STK_REG(R31)(r1)
/* Step 1:
*
@@ -162,7 +154,7 @@
/* At this point, r3 contains new PP bits, save them in
* place of "access" in the param area (sic)
*/
- std r3,STK_PARM(r4)(r1)
+ std r3,STK_PARAM(R4)(r1)
/* Get htab_hash_mask */
ld r4,htab_hash_mask@got(2)
@@ -192,11 +184,11 @@
rldicr r3,r0,3,63-3 /* r3 = (hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,0 /* !bolted, !secondary */
li r8,MMU_PAGE_4K /* page size */
- ld r9,STK_PARM(r9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert1)
bl . /* Patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -215,11 +207,11 @@
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
li r8,MMU_PAGE_4K /* page size */
- ld r9,STK_PARM(r9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert2)
bl . /* Patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -255,15 +247,15 @@
* (maybe add eieio may be good still ?)
*/
htab_write_out_pte:
- ld r6,STK_PARM(r6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r30,0(r6)
li r3, 0
htab_bail:
- ld r27,STK_REG(r27)(r1)
- ld r28,STK_REG(r28)(r1)
- ld r29,STK_REG(r29)(r1)
- ld r30,STK_REG(r30)(r1)
- ld r31,STK_REG(r31)(r1)
+ ld r27,STK_REG(R27)(r1)
+ ld r28,STK_REG(R28)(r1)
+ ld r29,STK_REG(R29)(r1)
+ ld r30,STK_REG(R30)(r1)
+ ld r31,STK_REG(R31)(r1)
addi r1,r1,STACKFRAMESIZE
ld r0,16(r1)
mtlr r0
@@ -288,8 +280,8 @@
/* Call ppc_md.hpte_updatepp */
mr r5,r29 /* va */
li r6,MMU_PAGE_4K /* page size */
- ld r7,STK_PARM(r9)(r1) /* segment size */
- ld r8,STK_PARM(r8)(r1) /* get "local" param */
+ ld r7,STK_PARAM(R9)(r1) /* segment size */
+ ld r8,STK_PARAM(R8)(r1) /* get "local" param */
_GLOBAL(htab_call_hpte_updatepp)
bl . /* Patched by htab_finish_init() */
@@ -312,7 +304,7 @@
htab_pte_insert_failure:
/* Bail out restoring old PTE */
- ld r6,STK_PARM(r6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r31,0(r6)
li r3,-1
b htab_bail
@@ -340,9 +332,9 @@
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
/* Save all params that we need after a function call */
- std r6,STK_PARM(r6)(r1)
- std r8,STK_PARM(r8)(r1)
- std r9,STK_PARM(r9)(r1)
+ std r6,STK_PARAM(R6)(r1)
+ std r8,STK_PARAM(R8)(r1)
+ std r9,STK_PARAM(R9)(r1)
/* Save non-volatile registers.
* r31 will hold "old PTE"
@@ -353,13 +345,13 @@
* r26 is the hidx mask
* r25 is the index in combo page
*/
- std r25,STK_REG(r25)(r1)
- std r26,STK_REG(r26)(r1)
- std r27,STK_REG(r27)(r1)
- std r28,STK_REG(r28)(r1)
- std r29,STK_REG(r29)(r1)
- std r30,STK_REG(r30)(r1)
- std r31,STK_REG(r31)(r1)
+ std r25,STK_REG(R25)(r1)
+ std r26,STK_REG(R26)(r1)
+ std r27,STK_REG(R27)(r1)
+ std r28,STK_REG(R28)(r1)
+ std r29,STK_REG(R29)(r1)
+ std r30,STK_REG(R30)(r1)
+ std r31,STK_REG(R31)(r1)
/* Step 1:
*
@@ -452,7 +444,7 @@
/* At this point, r3 contains new PP bits, save them in
* place of "access" in the param area (sic)
*/
- std r3,STK_PARM(r4)(r1)
+ std r3,STK_PARAM(R4)(r1)
/* Get htab_hash_mask */
ld r4,htab_hash_mask@got(2)
@@ -473,7 +465,7 @@
andis. r0,r31,_PAGE_COMBO@h
beq htab_inval_old_hpte
- ld r6,STK_PARM(r6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
ori r26,r6,0x8000 /* Load the hidx mask */
ld r26,0(r26)
addi r5,r25,36 /* Check actual HPTE_SUB bit, this */
@@ -495,11 +487,11 @@
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,0 /* !bolted, !secondary */
li r8,MMU_PAGE_4K /* page size */
- ld r9,STK_PARM(r9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert1)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -522,11 +514,11 @@
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
li r8,MMU_PAGE_4K /* page size */
- ld r9,STK_PARM(r9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert2)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -559,8 +551,8 @@
mr r4,r31 /* PTE.pte */
li r5,0 /* PTE.hidx */
li r6,MMU_PAGE_64K /* psize */
- ld r7,STK_PARM(r9)(r1) /* ssize */
- ld r8,STK_PARM(r8)(r1) /* local */
+ ld r7,STK_PARAM(R9)(r1) /* ssize */
+ ld r8,STK_PARAM(R8)(r1) /* local */
bl .flush_hash_page
/* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */
lis r0,_PAGE_HPTE_SUB@h
@@ -576,7 +568,7 @@
/* Insert slot number & secondary bit in PTE second half,
* clear _PAGE_BUSY and set approriate HPTE slot bit
*/
- ld r6,STK_PARM(r6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
li r0,_PAGE_BUSY
andc r30,r30,r0
/* HPTE SUB bit */
@@ -597,13 +589,13 @@
std r30,0(r6)
li r3, 0
htab_bail:
- ld r25,STK_REG(r25)(r1)
- ld r26,STK_REG(r26)(r1)
- ld r27,STK_REG(r27)(r1)
- ld r28,STK_REG(r28)(r1)
- ld r29,STK_REG(r29)(r1)
- ld r30,STK_REG(r30)(r1)
- ld r31,STK_REG(r31)(r1)
+ ld r25,STK_REG(R25)(r1)
+ ld r26,STK_REG(R26)(r1)
+ ld r27,STK_REG(R27)(r1)
+ ld r28,STK_REG(R28)(r1)
+ ld r29,STK_REG(R29)(r1)
+ ld r30,STK_REG(R30)(r1)
+ ld r31,STK_REG(R31)(r1)
addi r1,r1,STACKFRAMESIZE
ld r0,16(r1)
mtlr r0
@@ -630,8 +622,8 @@
/* Call ppc_md.hpte_updatepp */
mr r5,r29 /* va */
li r6,MMU_PAGE_4K /* page size */
- ld r7,STK_PARM(r9)(r1) /* segment size */
- ld r8,STK_PARM(r8)(r1) /* get "local" param */
+ ld r7,STK_PARAM(R9)(r1) /* segment size */
+ ld r8,STK_PARAM(R8)(r1) /* get "local" param */
_GLOBAL(htab_call_hpte_updatepp)
bl . /* patched by htab_finish_init() */
@@ -644,7 +636,7 @@
/* Clear the BUSY bit and Write out the PTE */
li r0,_PAGE_BUSY
andc r30,r30,r0
- ld r6,STK_PARM(r6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r30,0(r6)
li r3,0
b htab_bail
@@ -657,7 +649,7 @@
htab_pte_insert_failure:
/* Bail out restoring old PTE */
- ld r6,STK_PARM(r6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r31,0(r6)
li r3,-1
b htab_bail
@@ -677,9 +669,9 @@
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
/* Save all params that we need after a function call */
- std r6,STK_PARM(r6)(r1)
- std r8,STK_PARM(r8)(r1)
- std r9,STK_PARM(r9)(r1)
+ std r6,STK_PARAM(R6)(r1)
+ std r8,STK_PARAM(R8)(r1)
+ std r9,STK_PARAM(R9)(r1)
/* Save non-volatile registers.
* r31 will hold "old PTE"
@@ -688,11 +680,11 @@
* r28 is a hash value
* r27 is hashtab mask (maybe dynamic patched instead ?)
*/
- std r27,STK_REG(r27)(r1)
- std r28,STK_REG(r28)(r1)
- std r29,STK_REG(r29)(r1)
- std r30,STK_REG(r30)(r1)
- std r31,STK_REG(r31)(r1)
+ std r27,STK_REG(R27)(r1)
+ std r28,STK_REG(R28)(r1)
+ std r29,STK_REG(R29)(r1)
+ std r30,STK_REG(R30)(r1)
+ std r31,STK_REG(R31)(r1)
/* Step 1:
*
@@ -780,7 +772,7 @@
/* At this point, r3 contains new PP bits, save them in
* place of "access" in the param area (sic)
*/
- std r3,STK_PARM(r4)(r1)
+ std r3,STK_PARAM(R4)(r1)
/* Get htab_hash_mask */
ld r4,htab_hash_mask@got(2)
@@ -813,11 +805,11 @@
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,0 /* !bolted, !secondary */
li r8,MMU_PAGE_64K
- ld r9,STK_PARM(r9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(ht64_call_hpte_insert1)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -836,11 +828,11 @@
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
li r8,MMU_PAGE_64K
- ld r9,STK_PARM(r9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(ht64_call_hpte_insert2)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -876,15 +868,15 @@
* (maybe add eieio may be good still ?)
*/
ht64_write_out_pte:
- ld r6,STK_PARM(r6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r30,0(r6)
li r3, 0
ht64_bail:
- ld r27,STK_REG(r27)(r1)
- ld r28,STK_REG(r28)(r1)
- ld r29,STK_REG(r29)(r1)
- ld r30,STK_REG(r30)(r1)
- ld r31,STK_REG(r31)(r1)
+ ld r27,STK_REG(R27)(r1)
+ ld r28,STK_REG(R28)(r1)
+ ld r29,STK_REG(R29)(r1)
+ ld r30,STK_REG(R30)(r1)
+ ld r31,STK_REG(R31)(r1)
addi r1,r1,STACKFRAMESIZE
ld r0,16(r1)
mtlr r0
@@ -909,8 +901,8 @@
/* Call ppc_md.hpte_updatepp */
mr r5,r29 /* va */
li r6,MMU_PAGE_64K
- ld r7,STK_PARM(r9)(r1) /* segment size */
- ld r8,STK_PARM(r8)(r1) /* get "local" param */
+ ld r7,STK_PARAM(R9)(r1) /* segment size */
+ ld r8,STK_PARAM(R8)(r1) /* get "local" param */
_GLOBAL(ht64_call_hpte_updatepp)
bl . /* patched by htab_finish_init() */
@@ -933,7 +925,7 @@
ht64_pte_insert_failure:
/* Bail out restoring old PTE */
- ld r6,STK_PARM(r6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r31,0(r6)
li r3,-1
b ht64_bail
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index b6edbb3..39b1597 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -340,6 +340,8 @@
dbg("Using form 1 affinity\n");
form1_affinity = 1;
}
+
+ of_node_put(chosen);
}
}
@@ -635,11 +637,11 @@
*/
static void __init parse_drconf_memory(struct device_node *memory)
{
- const u32 *dm, *usm;
+ const u32 *uninitialized_var(dm), *usm;
unsigned int n, rc, ranges, is_kexec_kdump = 0;
unsigned long lmb_size, base, size, sz;
int nid;
- struct assoc_arrays aa;
+ struct assoc_arrays aa = { .arrays = NULL };
n = of_get_drconf_memory(memory, &dm);
if (!n)
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index ff672bd..f09d48e 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -126,7 +126,7 @@
/* Set the TLB reservation and search for existing entry. Then load
* the entry.
*/
- PPC_TLBSRX_DOT(0,r16)
+ PPC_TLBSRX_DOT(0,R16)
ldx r14,r14,r15 /* grab pgd entry */
beq normal_tlb_miss_done /* tlb exists already, bail */
MMU_FTR_SECTION_ELSE
@@ -395,7 +395,7 @@
/* Set the TLB reservation and search for existing entry. Then load
* the entry.
*/
- PPC_TLBSRX_DOT(0,r16)
+ PPC_TLBSRX_DOT(0,R16)
ld r14,0(r10)
beq normal_tlb_miss_done
MMU_FTR_SECTION_ELSE
@@ -528,7 +528,7 @@
/* Search if we already have a TLB entry for that virtual address, and
* if we do, bail out.
*/
- PPC_TLBSRX_DOT(0,r16)
+ PPC_TLBSRX_DOT(0,R16)
beq virt_page_table_tlb_miss_done
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV)
@@ -779,7 +779,7 @@
*
* MAS1:IND should be already set based on MAS4
*/
- PPC_TLBSRX_DOT(0,r16)
+ PPC_TLBSRX_DOT(0,R16)
beq htw_tlb_miss_done
/* Now, we need to walk the page tables. First check if we are in
@@ -919,7 +919,7 @@
mtspr SPRN_MAS1,r15
/* Already somebody there ? */
- PPC_TLBSRX_DOT(0,r16)
+ PPC_TLBSRX_DOT(0,R16)
beq tlb_load_linear_done
/* Now we build the remaining MAS. MAS0 and 2 should be fine
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 7c63c0e..fab919f 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -266,7 +266,7 @@
andi. r3,r3,MMUCSR0_TLBFI@l
bne 1b
MMU_FTR_SECTION_ELSE
- PPC_TLBILX_ALL(0,0)
+ PPC_TLBILX_ALL(0,R0)
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
msync
isync
@@ -279,7 +279,7 @@
wrteei 0
mfspr r4,SPRN_MAS6 /* save MAS6 */
mtspr SPRN_MAS6,r3
- PPC_TLBILX_PID(0,0)
+ PPC_TLBILX_PID(0,R0)
mtspr SPRN_MAS6,r4 /* restore MAS6 */
wrtee r10
MMU_FTR_SECTION_ELSE
@@ -313,7 +313,7 @@
mtspr SPRN_MAS1,r4
tlbwe
MMU_FTR_SECTION_ELSE
- PPC_TLBILX_VA(0,r3)
+ PPC_TLBILX_VA(0,R3)
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
msync
isync
@@ -331,7 +331,7 @@
mfmsr r10
wrteei 0
mtspr SPRN_MAS6,r4
- PPC_TLBILX_PID(0,0)
+ PPC_TLBILX_PID(0,R0)
wrtee r10
msync
isync
@@ -343,14 +343,14 @@
ori r4,r4,MAS6_SIND
wrteei 0
mtspr SPRN_MAS6,r4
- PPC_TLBILX_PID(0,0)
+ PPC_TLBILX_PID(0,R0)
wrtee r10
msync
isync
blr
_GLOBAL(_tlbil_all)
- PPC_TLBILX_ALL(0,0)
+ PPC_TLBILX_ALL(0,R0)
msync
isync
blr
@@ -364,7 +364,7 @@
beq 1f
rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
- PPC_TLBILX_VA(0,r3)
+ PPC_TLBILX_VA(0,R3)
msync
isync
wrtee r10
@@ -379,7 +379,7 @@
beq 1f
rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
- PPC_TLBIVAX(0,r3)
+ PPC_TLBIVAX(0,R3)
eieio
tlbsync
sync
diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h
index 5c3cf2d..1fc8109 100644
--- a/arch/powerpc/net/bpf_jit.h
+++ b/arch/powerpc/net/bpf_jit.h
@@ -75,23 +75,23 @@
#define PPC_NOP() EMIT(PPC_INST_NOP)
#define PPC_BLR() EMIT(PPC_INST_BLR)
#define PPC_BLRL() EMIT(PPC_INST_BLRL)
-#define PPC_MTLR(r) EMIT(PPC_INST_MTLR | __PPC_RT(r))
-#define PPC_ADDI(d, a, i) EMIT(PPC_INST_ADDI | __PPC_RT(d) | \
- __PPC_RA(a) | IMM_L(i))
+#define PPC_MTLR(r) EMIT(PPC_INST_MTLR | ___PPC_RT(r))
+#define PPC_ADDI(d, a, i) EMIT(PPC_INST_ADDI | ___PPC_RT(d) | \
+ ___PPC_RA(a) | IMM_L(i))
#define PPC_MR(d, a) PPC_OR(d, a, a)
#define PPC_LI(r, i) PPC_ADDI(r, 0, i)
#define PPC_ADDIS(d, a, i) EMIT(PPC_INST_ADDIS | \
- __PPC_RS(d) | __PPC_RA(a) | IMM_L(i))
+ ___PPC_RS(d) | ___PPC_RA(a) | IMM_L(i))
#define PPC_LIS(r, i) PPC_ADDIS(r, 0, i)
-#define PPC_STD(r, base, i) EMIT(PPC_INST_STD | __PPC_RS(r) | \
- __PPC_RA(base) | ((i) & 0xfffc))
+#define PPC_STD(r, base, i) EMIT(PPC_INST_STD | ___PPC_RS(r) | \
+ ___PPC_RA(base) | ((i) & 0xfffc))
-#define PPC_LD(r, base, i) EMIT(PPC_INST_LD | __PPC_RT(r) | \
- __PPC_RA(base) | IMM_L(i))
-#define PPC_LWZ(r, base, i) EMIT(PPC_INST_LWZ | __PPC_RT(r) | \
- __PPC_RA(base) | IMM_L(i))
-#define PPC_LHZ(r, base, i) EMIT(PPC_INST_LHZ | __PPC_RT(r) | \
- __PPC_RA(base) | IMM_L(i))
+#define PPC_LD(r, base, i) EMIT(PPC_INST_LD | ___PPC_RT(r) | \
+ ___PPC_RA(base) | IMM_L(i))
+#define PPC_LWZ(r, base, i) EMIT(PPC_INST_LWZ | ___PPC_RT(r) | \
+ ___PPC_RA(base) | IMM_L(i))
+#define PPC_LHZ(r, base, i) EMIT(PPC_INST_LHZ | ___PPC_RT(r) | \
+ ___PPC_RA(base) | IMM_L(i))
/* Convenience helpers for the above with 'far' offsets: */
#define PPC_LD_OFFS(r, base, i) do { if ((i) < 32768) PPC_LD(r, base, i); \
else { PPC_ADDIS(r, base, IMM_HA(i)); \
@@ -105,52 +105,52 @@
else { PPC_ADDIS(r, base, IMM_HA(i)); \
PPC_LHZ(r, r, IMM_L(i)); } } while(0)
-#define PPC_CMPWI(a, i) EMIT(PPC_INST_CMPWI | __PPC_RA(a) | IMM_L(i))
-#define PPC_CMPDI(a, i) EMIT(PPC_INST_CMPDI | __PPC_RA(a) | IMM_L(i))
-#define PPC_CMPLWI(a, i) EMIT(PPC_INST_CMPLWI | __PPC_RA(a) | IMM_L(i))
-#define PPC_CMPLW(a, b) EMIT(PPC_INST_CMPLW | __PPC_RA(a) | __PPC_RB(b))
+#define PPC_CMPWI(a, i) EMIT(PPC_INST_CMPWI | ___PPC_RA(a) | IMM_L(i))
+#define PPC_CMPDI(a, i) EMIT(PPC_INST_CMPDI | ___PPC_RA(a) | IMM_L(i))
+#define PPC_CMPLWI(a, i) EMIT(PPC_INST_CMPLWI | ___PPC_RA(a) | IMM_L(i))
+#define PPC_CMPLW(a, b) EMIT(PPC_INST_CMPLW | ___PPC_RA(a) | ___PPC_RB(b))
-#define PPC_SUB(d, a, b) EMIT(PPC_INST_SUB | __PPC_RT(d) | \
- __PPC_RB(a) | __PPC_RA(b))
-#define PPC_ADD(d, a, b) EMIT(PPC_INST_ADD | __PPC_RT(d) | \
- __PPC_RA(a) | __PPC_RB(b))
-#define PPC_MUL(d, a, b) EMIT(PPC_INST_MULLW | __PPC_RT(d) | \
- __PPC_RA(a) | __PPC_RB(b))
-#define PPC_MULHWU(d, a, b) EMIT(PPC_INST_MULHWU | __PPC_RT(d) | \
- __PPC_RA(a) | __PPC_RB(b))
-#define PPC_MULI(d, a, i) EMIT(PPC_INST_MULLI | __PPC_RT(d) | \
- __PPC_RA(a) | IMM_L(i))
-#define PPC_DIVWU(d, a, b) EMIT(PPC_INST_DIVWU | __PPC_RT(d) | \
- __PPC_RA(a) | __PPC_RB(b))
-#define PPC_AND(d, a, b) EMIT(PPC_INST_AND | __PPC_RA(d) | \
- __PPC_RS(a) | __PPC_RB(b))
-#define PPC_ANDI(d, a, i) EMIT(PPC_INST_ANDI | __PPC_RA(d) | \
- __PPC_RS(a) | IMM_L(i))
-#define PPC_AND_DOT(d, a, b) EMIT(PPC_INST_ANDDOT | __PPC_RA(d) | \
- __PPC_RS(a) | __PPC_RB(b))
-#define PPC_OR(d, a, b) EMIT(PPC_INST_OR | __PPC_RA(d) | \
- __PPC_RS(a) | __PPC_RB(b))
-#define PPC_ORI(d, a, i) EMIT(PPC_INST_ORI | __PPC_RA(d) | \
- __PPC_RS(a) | IMM_L(i))
-#define PPC_ORIS(d, a, i) EMIT(PPC_INST_ORIS | __PPC_RA(d) | \
- __PPC_RS(a) | IMM_L(i))
-#define PPC_SLW(d, a, s) EMIT(PPC_INST_SLW | __PPC_RA(d) | \
- __PPC_RS(a) | __PPC_RB(s))
-#define PPC_SRW(d, a, s) EMIT(PPC_INST_SRW | __PPC_RA(d) | \
- __PPC_RS(a) | __PPC_RB(s))
+#define PPC_SUB(d, a, b) EMIT(PPC_INST_SUB | ___PPC_RT(d) | \
+ ___PPC_RB(a) | ___PPC_RA(b))
+#define PPC_ADD(d, a, b) EMIT(PPC_INST_ADD | ___PPC_RT(d) | \
+ ___PPC_RA(a) | ___PPC_RB(b))
+#define PPC_MUL(d, a, b) EMIT(PPC_INST_MULLW | ___PPC_RT(d) | \
+ ___PPC_RA(a) | ___PPC_RB(b))
+#define PPC_MULHWU(d, a, b) EMIT(PPC_INST_MULHWU | ___PPC_RT(d) | \
+ ___PPC_RA(a) | ___PPC_RB(b))
+#define PPC_MULI(d, a, i) EMIT(PPC_INST_MULLI | ___PPC_RT(d) | \
+ ___PPC_RA(a) | IMM_L(i))
+#define PPC_DIVWU(d, a, b) EMIT(PPC_INST_DIVWU | ___PPC_RT(d) | \
+ ___PPC_RA(a) | ___PPC_RB(b))
+#define PPC_AND(d, a, b) EMIT(PPC_INST_AND | ___PPC_RA(d) | \
+ ___PPC_RS(a) | ___PPC_RB(b))
+#define PPC_ANDI(d, a, i) EMIT(PPC_INST_ANDI | ___PPC_RA(d) | \
+ ___PPC_RS(a) | IMM_L(i))
+#define PPC_AND_DOT(d, a, b) EMIT(PPC_INST_ANDDOT | ___PPC_RA(d) | \
+ ___PPC_RS(a) | ___PPC_RB(b))
+#define PPC_OR(d, a, b) EMIT(PPC_INST_OR | ___PPC_RA(d) | \
+ ___PPC_RS(a) | ___PPC_RB(b))
+#define PPC_ORI(d, a, i) EMIT(PPC_INST_ORI | ___PPC_RA(d) | \
+ ___PPC_RS(a) | IMM_L(i))
+#define PPC_ORIS(d, a, i) EMIT(PPC_INST_ORIS | ___PPC_RA(d) | \
+ ___PPC_RS(a) | IMM_L(i))
+#define PPC_SLW(d, a, s) EMIT(PPC_INST_SLW | ___PPC_RA(d) | \
+ ___PPC_RS(a) | ___PPC_RB(s))
+#define PPC_SRW(d, a, s) EMIT(PPC_INST_SRW | ___PPC_RA(d) | \
+ ___PPC_RS(a) | ___PPC_RB(s))
/* slwi = rlwinm Rx, Ry, n, 0, 31-n */
-#define PPC_SLWI(d, a, i) EMIT(PPC_INST_RLWINM | __PPC_RA(d) | \
- __PPC_RS(a) | __PPC_SH(i) | \
+#define PPC_SLWI(d, a, i) EMIT(PPC_INST_RLWINM | ___PPC_RA(d) | \
+ ___PPC_RS(a) | __PPC_SH(i) | \
__PPC_MB(0) | __PPC_ME(31-(i)))
/* srwi = rlwinm Rx, Ry, 32-n, n, 31 */
-#define PPC_SRWI(d, a, i) EMIT(PPC_INST_RLWINM | __PPC_RA(d) | \
- __PPC_RS(a) | __PPC_SH(32-(i)) | \
+#define PPC_SRWI(d, a, i) EMIT(PPC_INST_RLWINM | ___PPC_RA(d) | \
+ ___PPC_RS(a) | __PPC_SH(32-(i)) | \
__PPC_MB(i) | __PPC_ME(31))
/* sldi = rldicr Rx, Ry, n, 63-n */
-#define PPC_SLDI(d, a, i) EMIT(PPC_INST_RLDICR | __PPC_RA(d) | \
- __PPC_RS(a) | __PPC_SH(i) | \
+#define PPC_SLDI(d, a, i) EMIT(PPC_INST_RLDICR | ___PPC_RA(d) | \
+ ___PPC_RS(a) | __PPC_SH(i) | \
__PPC_MB(63-(i)) | (((i) & 0x20) >> 4))
-#define PPC_NEG(d, a) EMIT(PPC_INST_NEG | __PPC_RT(d) | __PPC_RA(a))
+#define PPC_NEG(d, a) EMIT(PPC_INST_NEG | ___PPC_RT(d) | ___PPC_RA(a))
/* Long jump; (unconditional 'branch') */
#define PPC_JMP(dest) EMIT(PPC_INST_BRANCH | \
diff --git a/arch/powerpc/net/bpf_jit_64.S b/arch/powerpc/net/bpf_jit_64.S
index 55ba385..7d3a3b5 100644
--- a/arch/powerpc/net/bpf_jit_64.S
+++ b/arch/powerpc/net/bpf_jit_64.S
@@ -105,6 +105,7 @@
mr r4, r_addr; \
li r6, SIZE; \
bl skb_copy_bits; \
+ nop; \
/* R3 = 0 on success */ \
addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \
ld r0, 16(r1); \
@@ -156,6 +157,7 @@
mr r4, r_addr; \
li r5, SIZE; \
bl bpf_internal_load_pointer_neg_helper; \
+ nop; \
/* R3 != 0 on success */ \
addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \
ld r0, 16(r1); \
diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c
index 2dc8b14..dd11306 100644
--- a/arch/powerpc/net/bpf_jit_comp.c
+++ b/arch/powerpc/net/bpf_jit_comp.c
@@ -39,7 +39,7 @@
/* Make stackframe */
if (ctx->seen & SEEN_DATAREF) {
/* If we call any helpers (for loads), save LR */
- EMIT(PPC_INST_MFLR | __PPC_RT(0));
+ EMIT(PPC_INST_MFLR | __PPC_RT(R0));
PPC_STD(0, 1, 16);
/* Back up non-volatile regs. */
@@ -56,7 +56,7 @@
PPC_STD(i, 1, -(8*(32-i)));
}
}
- EMIT(PPC_INST_STDU | __PPC_RS(1) | __PPC_RA(1) |
+ EMIT(PPC_INST_STDU | __PPC_RS(R1) | __PPC_RA(R1) |
(-BPF_PPC_STACKFRAME & 0xfffc));
}
diff --git a/arch/powerpc/perf/callchain.c b/arch/powerpc/perf/callchain.c
index e8a18d1..74d1e78 100644
--- a/arch/powerpc/perf/callchain.c
+++ b/arch/powerpc/perf/callchain.c
@@ -57,7 +57,7 @@
lr = regs->link;
sp = regs->gpr[1];
- perf_callchain_store(entry, regs->nip);
+ perf_callchain_store(entry, perf_instruction_pointer(regs));
if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
return;
@@ -238,7 +238,7 @@
struct signal_frame_64 __user *sigframe;
unsigned long __user *fp, *uregs;
- next_ip = regs->nip;
+ next_ip = perf_instruction_pointer(regs);
lr = regs->link;
sp = regs->gpr[1];
perf_callchain_store(entry, next_ip);
@@ -444,7 +444,7 @@
long level = 0;
unsigned int __user *fp, *uregs;
- next_ip = regs->nip;
+ next_ip = perf_instruction_pointer(regs);
lr = regs->link;
sp = regs->gpr[1];
perf_callchain_store(entry, next_ip);
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 8f84bcb..77b49dd 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -73,7 +73,10 @@
{
return 0;
}
-static inline void perf_read_regs(struct pt_regs *regs) { }
+static inline void perf_read_regs(struct pt_regs *regs)
+{
+ regs->result = 0;
+}
static inline int perf_intr_is_nmi(struct pt_regs *regs)
{
return 0;
@@ -116,6 +119,26 @@
*addrp = mfspr(SPRN_SDAR);
}
+static bool mmcra_sihv(unsigned long mmcra)
+{
+ unsigned long sihv = MMCRA_SIHV;
+
+ if (ppmu->flags & PPMU_ALT_SIPR)
+ sihv = POWER6_MMCRA_SIHV;
+
+ return !!(mmcra & sihv);
+}
+
+static bool mmcra_sipr(unsigned long mmcra)
+{
+ unsigned long sipr = MMCRA_SIPR;
+
+ if (ppmu->flags & PPMU_ALT_SIPR)
+ sipr = POWER6_MMCRA_SIPR;
+
+ return !!(mmcra & sipr);
+}
+
static inline u32 perf_flags_from_msr(struct pt_regs *regs)
{
if (regs->msr & MSR_PR)
@@ -128,19 +151,9 @@
static inline u32 perf_get_misc_flags(struct pt_regs *regs)
{
unsigned long mmcra = regs->dsisr;
- unsigned long sihv = MMCRA_SIHV;
- unsigned long sipr = MMCRA_SIPR;
+ unsigned long use_siar = regs->result;
- /* Not a PMU interrupt: Make up flags from regs->msr */
- if (TRAP(regs) != 0xf00)
- return perf_flags_from_msr(regs);
-
- /*
- * If we don't support continuous sampling and this
- * is not a marked event, same deal
- */
- if ((ppmu->flags & PPMU_NO_CONT_SAMPLING) &&
- !(mmcra & MMCRA_SAMPLE_ENABLE))
+ if (!use_siar)
return perf_flags_from_msr(regs);
/*
@@ -156,15 +169,10 @@
return PERF_RECORD_MISC_USER;
}
- if (ppmu->flags & PPMU_ALT_SIPR) {
- sihv = POWER6_MMCRA_SIHV;
- sipr = POWER6_MMCRA_SIPR;
- }
-
/* PR has priority over HV, so order below is important */
- if (mmcra & sipr)
+ if (mmcra_sipr(mmcra))
return PERF_RECORD_MISC_USER;
- if ((mmcra & sihv) && (freeze_events_kernel != MMCR0_FCHV))
+ if (mmcra_sihv(mmcra) && (freeze_events_kernel != MMCR0_FCHV))
return PERF_RECORD_MISC_HYPERVISOR;
return PERF_RECORD_MISC_KERNEL;
}
@@ -172,10 +180,45 @@
/*
* Overload regs->dsisr to store MMCRA so we only need to read it once
* on each interrupt.
+ * Overload regs->result to specify whether we should use the MSR (result
+ * is zero) or the SIAR (result is non zero).
*/
static inline void perf_read_regs(struct pt_regs *regs)
{
- regs->dsisr = mfspr(SPRN_MMCRA);
+ unsigned long mmcra = mfspr(SPRN_MMCRA);
+ int marked = mmcra & MMCRA_SAMPLE_ENABLE;
+ int use_siar;
+
+ /*
+ * If this isn't a PMU exception (eg a software event) the SIAR is
+ * not valid. Use pt_regs.
+ *
+ * If it is a marked event use the SIAR.
+ *
+ * If the PMU doesn't update the SIAR for non marked events use
+ * pt_regs.
+ *
+ * If the PMU has HV/PR flags then check to see if they
+ * place the exception in userspace. If so, use pt_regs. In
+ * continuous sampling mode the SIAR and the PMU exception are
+ * not synchronised, so they may be many instructions apart.
+ * This can result in confusing backtraces. We still want
+ * hypervisor samples as well as samples in the kernel with
+ * interrupts off hence the userspace check.
+ */
+ if (TRAP(regs) != 0xf00)
+ use_siar = 0;
+ else if (marked)
+ use_siar = 1;
+ else if ((ppmu->flags & PPMU_NO_CONT_SAMPLING))
+ use_siar = 0;
+ else if (!(ppmu->flags & PPMU_NO_SIPR) && mmcra_sipr(mmcra))
+ use_siar = 0;
+ else
+ use_siar = 1;
+
+ regs->dsisr = mmcra;
+ regs->result = use_siar;
}
/*
@@ -1329,18 +1372,12 @@
*/
unsigned long perf_instruction_pointer(struct pt_regs *regs)
{
- unsigned long mmcra = regs->dsisr;
+ unsigned long use_siar = regs->result;
- /* Not a PMU interrupt */
- if (TRAP(regs) != 0xf00)
+ if (use_siar)
+ return mfspr(SPRN_SIAR) + perf_ip_adjust(regs);
+ else
return regs->nip;
-
- /* Processor doesn't support sampling non marked events */
- if ((ppmu->flags & PPMU_NO_CONT_SAMPLING) &&
- !(mmcra & MMCRA_SAMPLE_ENABLE))
- return regs->nip;
-
- return mfspr(SPRN_SIAR) + perf_ip_adjust(regs);
}
static bool pmc_overflow(unsigned long val)
diff --git a/arch/powerpc/platforms/44x/currituck.c b/arch/powerpc/platforms/44x/currituck.c
index 583e67f..9f6c33d6 100644
--- a/arch/powerpc/platforms/44x/currituck.c
+++ b/arch/powerpc/platforms/44x/currituck.c
@@ -160,7 +160,7 @@
/* No need to check the DMA config as we /know/ our windows are all of
* RAM. Lets hope that doesn't change */
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > 0xffffffff) {
+ if ((memblock_end_of_DRAM() - 1) > 0xffffffff) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/82xx/km82xx.c b/arch/powerpc/platforms/82xx/km82xx.c
index 3661bcd..cf964e1 100644
--- a/arch/powerpc/platforms/82xx/km82xx.c
+++ b/arch/powerpc/platforms/82xx/km82xx.c
@@ -128,6 +128,11 @@
{3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* TXP */
{3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* TXN */
{3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* RXD */
+
+ /* SPI */
+ {3, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_MISO PD16 */
+ {3, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_MOSI PD17 */
+ {3, 18, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_CLK PD18 */
};
static void __init init_ioports(void)
diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c
index a266ba8..89923d7 100644
--- a/arch/powerpc/platforms/83xx/km83xx.c
+++ b/arch/powerpc/platforms/83xx/km83xx.c
@@ -3,7 +3,7 @@
* Author: Heiko Schocher <hs@denx.de>
*
* Description:
- * Keymile KMETER1 board specific routines.
+ * Keymile 83xx platform specific routines.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -70,54 +70,88 @@
for_each_node_by_name(np, "spi")
par_io_of_config(np);
- for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
+ for_each_node_by_name(np, "ucc")
par_io_of_config(np);
}
np = of_find_compatible_node(NULL, "network", "ucc_geth");
if (np != NULL) {
- uint svid;
+ /*
+ * handle mpc8360E Erratum QE_ENET10:
+ * RGMII AC values do not meet the specification
+ */
+ uint svid = mfspr(SPRN_SVR);
+ struct device_node *np_par;
+ struct resource res;
+ void __iomem *base;
+ int ret;
- /* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
- svid = mfspr(SPRN_SVR);
- if (SVR_REV(svid) == 0x0021) {
- struct device_node *np_par;
- struct resource res;
- void __iomem *base;
- int ret;
-
- np_par = of_find_node_by_name(NULL, "par_io");
- if (np_par == NULL) {
- printk(KERN_WARNING "%s couldn;t find par_io node\n",
- __func__);
- return;
- }
- /* Map Parallel I/O ports registers */
- ret = of_address_to_resource(np_par, 0, &res);
- if (ret) {
- printk(KERN_WARNING "%s couldn;t map par_io registers\n",
- __func__);
- return;
- }
- base = ioremap(res.start, resource_size(&res));
-
- /*
- * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
- * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
- */
- setbits32((base + 0xa8), 0x0c003000);
-
- /*
- * IMMR + 0x14AC[20:27] = 10101010
- * (data delay for both UCC's)
- */
- clrsetbits_be32((base + 0xac), 0xff0, 0xaa0);
- iounmap(base);
- of_node_put(np_par);
+ np_par = of_find_node_by_name(NULL, "par_io");
+ if (np_par == NULL) {
+ printk(KERN_WARNING "%s couldn;t find par_io node\n",
+ __func__);
+ return;
}
+ /* Map Parallel I/O ports registers */
+ ret = of_address_to_resource(np_par, 0, &res);
+ if (ret) {
+ printk(KERN_WARNING "%s couldn;t map par_io registers\n",
+ __func__);
+ return;
+ }
+
+ base = ioremap(res.start, res.end - res.start + 1);
+
+ /*
+ * set output delay adjustments to default values according
+ * table 5 in Errata Rev. 5, 9/2011:
+ *
+ * write 0b01 to UCC1 bits 18:19
+ * write 0b01 to UCC2 option 1 bits 4:5
+ * write 0b01 to UCC2 option 2 bits 16:17
+ */
+ clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000);
+
+ /*
+ * set output delay adjustments to default values according
+ * table 3-13 in Reference Manual Rev.3 05/2010:
+ *
+ * write 0b01 to UCC2 option 2 bits 16:17
+ * write 0b0101 to UCC1 bits 20:23
+ * write 0b0101 to UCC2 option 1 bits 24:27
+ */
+ clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550);
+
+ if (SVR_REV(svid) == 0x0021) {
+ /*
+ * UCC2 option 1: write 0b1010 to bits 24:27
+ * at address IMMRBAR+0x14AC
+ */
+ clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0);
+ } else if (SVR_REV(svid) == 0x0020) {
+ /*
+ * UCC1: write 0b11 to bits 18:19
+ * at address IMMRBAR+0x14A8
+ */
+ setbits32((base + 0xa8), 0x00003000);
+
+ /*
+ * UCC2 option 1: write 0b11 to bits 4:5
+ * at address IMMRBAR+0x14A8
+ */
+ setbits32((base + 0xa8), 0x0c000000);
+
+ /*
+ * UCC2 option 2: write 0b11 to bits 16:17
+ * at address IMMRBAR+0x14AC
+ */
+ setbits32((base + 0xac), 0x0000c000);
+ }
+ iounmap(base);
+ of_node_put(np_par);
of_node_put(np);
}
-#endif /* CONFIG_QUICC_ENGINE */
+#endif /* CONFIG_QUICC_ENGINE */
}
machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices);
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index f000d81..159c01e 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -23,6 +23,15 @@
cache-sram-size and cache-sram-offset kernel boot
parameters should be passed when this option is enabled.
+config BSC9131_RDB
+ bool "Freescale BSC9131RDB"
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the Freescale BSC9131RDB board.
+ The BSC9131 is a heterogeneous SoC containing an e500v2 powerpc and a
+ StarCore SC3850 DSP
+ Manufacturer : Freescale Semiconductor, Inc
+
config MPC8540_ADS
bool "Freescale MPC8540 ADS"
select DEFAULT_UIMAGE
@@ -175,12 +184,6 @@
help
This option enables support for the Wind River SBC8548 board
-config SBC8560
- bool "Wind River SBC8560"
- select DEFAULT_UIMAGE
- help
- This option enables support for the Wind River SBC8560 board
-
config GE_IMP3A
bool "GE Intelligent Platforms IMP3A"
select DEFAULT_UIMAGE
@@ -222,18 +225,6 @@
help
This option enables support for the P3041 DS board
-config P3060_QDS
- bool "Freescale P3060 QDS"
- select DEFAULT_UIMAGE
- select PPC_E500MC
- select PHYS_64BIT
- select SWIOTLB
- select GPIO_MPC8XXX
- select HAS_RAPIDIO
- select PPC_EPAPR_HV_PIC
- help
- This option enables support for the P3060 QDS board
-
config P4080_DS
bool "Freescale P4080 DS"
select DEFAULT_UIMAGE
@@ -263,6 +254,22 @@
help
This option enables support for the P5020 DS board
+config PPC_QEMU_E500
+ bool "QEMU generic e500 platform"
+ depends on EXPERIMENTAL
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for running as a QEMU guest using
+ QEMU's generic e500 machine. This is not required if you're
+ using a QEMU machine that targets a specific board, such as
+ mpc8544ds.
+
+ Unlike most e500 boards that target a specific CPU, this
+ platform works with any e500-family CPU that QEMU supports.
+ Thus, you'll need to make sure CONFIG_PPC_E500MC is set or
+ unset based on the emulated CPU (or actual host CPU in the case
+ of KVM).
+
endif # FSL_SOC_BOOKE
config TQM85xx
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 2125d4c..3dfe811 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -5,6 +5,7 @@
obj-y += common.o
+obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
@@ -17,14 +18,13 @@
obj-$(CONFIG_P1023_RDS) += p1023_rds.o
obj-$(CONFIG_P2041_RDB) += p2041_rdb.o corenet_ds.o
obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o
-obj-$(CONFIG_P3060_QDS) += p3060_qds.o corenet_ds.o
obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
-obj-$(CONFIG_SBC8560) += sbc8560.o
obj-$(CONFIG_SBC8548) += sbc8548.o
obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
obj-$(CONFIG_KSI8560) += ksi8560.o
obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o
+obj-$(CONFIG_PPC_QEMU_E500) += qemu_e500.o
diff --git a/arch/powerpc/platforms/85xx/bsc913x_rdb.c b/arch/powerpc/platforms/85xx/bsc913x_rdb.c
new file mode 100644
index 0000000..9d57bed
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/bsc913x_rdb.c
@@ -0,0 +1,67 @@
+/*
+ * BSC913xRDB Board Setup
+ *
+ * Author: Priyanka Jain <Priyanka.Jain@freescale.com>
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <asm/mpic.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/udbg.h>
+
+#include "mpc85xx.h"
+
+void __init bsc913x_rdb_pic_init(void)
+{
+ struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+ MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+
+ if (!mpic)
+ pr_err("bsc913x: Failed to allocate MPIC structure\n");
+ else
+ mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init bsc913x_rdb_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("bsc913x_rdb_setup_arch()", 0);
+
+ pr_info("bsc913x board from Freescale Semiconductor\n");
+}
+
+machine_device_initcall(bsc9131_rdb, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+
+static int __init bsc9131_rdb_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,bsc9131rdb");
+}
+
+define_machine(bsc9131_rdb) {
+ .name = "BSC9131 RDB",
+ .probe = bsc9131_rdb_probe,
+ .setup_arch = bsc913x_rdb_setup_arch,
+ .init_IRQ = bsc913x_rdb_pic_init,
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
index dd3617c..925b028 100644
--- a/arch/powerpc/platforms/85xx/corenet_ds.c
+++ b/arch/powerpc/platforms/85xx/corenet_ds.c
@@ -77,7 +77,7 @@
#endif
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/ge_imp3a.c b/arch/powerpc/platforms/85xx/ge_imp3a.c
index 1801462..b6a728b 100644
--- a/arch/powerpc/platforms/85xx/ge_imp3a.c
+++ b/arch/powerpc/platforms/85xx/ge_imp3a.c
@@ -125,7 +125,7 @@
mpc85xx_smp_init();
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 585bd22b..767c7cf 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -75,7 +75,7 @@
#endif
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 1fd91e9..6d3265f 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -114,72 +114,54 @@
}
#ifdef CONFIG_PCI
-static int primary_phb_addr;
extern int uli_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn);
+static struct device_node *pci_with_uli;
+
static int mpc85xx_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn)
{
- struct device_node* node;
- struct resource rsrc;
-
- node = hose->dn;
- of_address_to_resource(node, 0, &rsrc);
-
- if ((rsrc.start & 0xfffff) == primary_phb_addr) {
+ if (hose->dn == pci_with_uli)
return uli_exclude_device(hose, bus, devfn);
- }
return PCIBIOS_SUCCESSFUL;
}
#endif /* CONFIG_PCI */
+static void __init mpc85xx_ds_pci_init(void)
+{
+#ifdef CONFIG_PCI
+ struct device_node *node;
+
+ fsl_pci_init();
+
+ /* See if we have a ULI under the primary */
+
+ node = of_find_node_by_name(NULL, "uli1575");
+ while ((pci_with_uli = of_get_parent(node))) {
+ of_node_put(node);
+ node = pci_with_uli;
+
+ if (pci_with_uli == fsl_pci_primary) {
+ ppc_md.pci_exclude_device = mpc85xx_exclude_device;
+ break;
+ }
+ }
+#endif
+}
+
/*
* Setup the architecture
*/
static void __init mpc85xx_ds_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
- struct pci_controller *hose;
-#endif
- dma_addr_t max = 0xffffffff;
-
if (ppc_md.progress)
ppc_md.progress("mpc85xx_ds_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_node_by_type(np, "pci") {
- if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
- of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
- of_device_is_compatible(np, "fsl,p2020-pcie")) {
- struct resource rsrc;
- of_address_to_resource(np, 0, &rsrc);
- if ((rsrc.start & 0xfffff) == primary_phb_addr)
- fsl_add_bridge(np, 1);
- else
- fsl_add_bridge(np, 0);
-
- hose = pci_find_hose_for_OF_device(np);
- max = min(max, hose->dma_window_base_cur +
- hose->dma_window_size);
- }
- }
-
- ppc_md.pci_exclude_device = mpc85xx_exclude_device;
-#endif
-
+ mpc85xx_ds_pci_init();
mpc85xx_smp_init();
-#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
- ppc_swiotlb_enable = 1;
- set_pci_dma_ops(&swiotlb_dma_ops);
- ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
- }
-#endif
-
printk("MPC85xx DS board from Freescale Semiconductor\n");
}
@@ -190,14 +172,7 @@
{
unsigned long root = of_get_flat_dt_root();
- if (of_flat_dt_is_compatible(root, "MPC8544DS")) {
-#ifdef CONFIG_PCI
- primary_phb_addr = 0xb000;
-#endif
- return 1;
- }
-
- return 0;
+ return !!of_flat_dt_is_compatible(root, "MPC8544DS");
}
machine_device_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
@@ -215,14 +190,7 @@
{
unsigned long root = of_get_flat_dt_root();
- if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS")) {
-#ifdef CONFIG_PCI
- primary_phb_addr = 0x8000;
-#endif
- return 1;
- }
-
- return 0;
+ return !!of_flat_dt_is_compatible(root, "fsl,MPC8572DS");
}
/*
@@ -232,14 +200,7 @@
{
unsigned long root = of_get_flat_dt_root();
- if (of_flat_dt_is_compatible(root, "fsl,P2020DS")) {
-#ifdef CONFIG_PCI
- primary_phb_addr = 0x9000;
-#endif
- return 1;
- }
-
- return 0;
+ return !!of_flat_dt_is_compatible(root, "fsl,P2020DS");
}
define_machine(mpc8544_ds) {
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index d208ebc..8e4b094 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -359,7 +359,7 @@
mpc85xx_mds_qe_init();
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index 313fce4..1910fdc 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -169,6 +169,7 @@
machine_device_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
machine_device_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices);
+machine_device_initcall(p1024_rdb, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
@@ -237,6 +238,13 @@
return of_flat_dt_is_compatible(root, "fsl,P1020UTM-PC");
}
+static int __init p1024_rdb_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,P1024RDB");
+}
+
define_machine(p2020_rdb) {
.name = "P2020 RDB",
.probe = p2020_rdb_probe,
@@ -348,3 +356,17 @@
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
+
+define_machine(p1024_rdb) {
+ .name = "P1024 RDB",
+ .probe = p1024_rdb_probe,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index f700c81..89ee02c 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -27,6 +27,7 @@
#include <sysdev/fsl_pci.h>
#include <asm/udbg.h>
#include <asm/fsl_guts.h>
+#include <asm/fsl_lbc.h>
#include "smp.h"
#include "mpc85xx.h"
@@ -142,17 +143,73 @@
{
}
+struct fsl_law {
+ u32 lawbar;
+ u32 reserved1;
+ u32 lawar;
+ u32 reserved[5];
+};
+
+#define LAWBAR_MASK 0x00F00000
+#define LAWBAR_SHIFT 12
+
+#define LAWAR_EN 0x80000000
+#define LAWAR_TGT_MASK 0x01F00000
+#define LAW_TRGT_IF_LBC (0x04 << 20)
+
+#define LAWAR_MASK (LAWAR_EN | LAWAR_TGT_MASK)
+#define LAWAR_MATCH (LAWAR_EN | LAW_TRGT_IF_LBC)
+
+#define BR_BA 0xFFFF8000
+
+/*
+ * Map a BRx value to a physical address
+ *
+ * The localbus BRx registers only store the lower 32 bits of the address. To
+ * obtain the upper four bits, we need to scan the LAW table. The entry which
+ * maps to the localbus will contain the upper four bits.
+ */
+static phys_addr_t lbc_br_to_phys(const void *ecm, unsigned int count, u32 br)
+{
+#ifndef CONFIG_PHYS_64BIT
+ /*
+ * If we only have 32-bit addressing, then the BRx address *is* the
+ * physical address.
+ */
+ return br & BR_BA;
+#else
+ const struct fsl_law *law = ecm + 0xc08;
+ unsigned int i;
+
+ for (i = 0; i < count; i++) {
+ u64 lawbar = in_be32(&law[i].lawbar);
+ u32 lawar = in_be32(&law[i].lawar);
+
+ if ((lawar & LAWAR_MASK) == LAWAR_MATCH)
+ /* Extract the upper four bits */
+ return (br & BR_BA) | ((lawbar & LAWBAR_MASK) << 12);
+ }
+
+ return 0;
+#endif
+}
+
/**
* p1022ds_set_monitor_port: switch the output to a different monitor port
- *
*/
static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
{
struct device_node *guts_node;
- struct device_node *indirect_node = NULL;
+ struct device_node *lbc_node = NULL;
+ struct device_node *law_node = NULL;
struct ccsr_guts __iomem *guts;
+ struct fsl_lbc_regs *lbc = NULL;
+ void *ecm = NULL;
u8 __iomem *lbc_lcs0_ba = NULL;
u8 __iomem *lbc_lcs1_ba = NULL;
+ phys_addr_t cs0_addr, cs1_addr;
+ const __be32 *iprop;
+ unsigned int num_laws;
u8 b;
/* Map the global utilities registers. */
@@ -168,25 +225,43 @@
goto exit;
}
- indirect_node = of_find_compatible_node(NULL, NULL,
- "fsl,p1022ds-indirect-pixis");
- if (!indirect_node) {
- pr_err("p1022ds: missing pixis indirect mode node\n");
+ lbc_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc");
+ if (!lbc_node) {
+ pr_err("p1022ds: missing localbus node\n");
goto exit;
}
- lbc_lcs0_ba = of_iomap(indirect_node, 0);
- if (!lbc_lcs0_ba) {
- pr_err("p1022ds: could not map localbus chip select 0\n");
+ lbc = of_iomap(lbc_node, 0);
+ if (!lbc) {
+ pr_err("p1022ds: could not map localbus node\n");
goto exit;
}
- lbc_lcs1_ba = of_iomap(indirect_node, 1);
- if (!lbc_lcs1_ba) {
- pr_err("p1022ds: could not map localbus chip select 1\n");
+ law_node = of_find_compatible_node(NULL, NULL, "fsl,ecm-law");
+ if (!law_node) {
+ pr_err("p1022ds: missing local access window node\n");
goto exit;
}
+ ecm = of_iomap(law_node, 0);
+ if (!ecm) {
+ pr_err("p1022ds: could not map local access window node\n");
+ goto exit;
+ }
+
+ iprop = of_get_property(law_node, "fsl,num-laws", 0);
+ if (!iprop) {
+ pr_err("p1022ds: LAW node is missing fsl,num-laws property\n");
+ goto exit;
+ }
+ num_laws = be32_to_cpup(iprop);
+
+ cs0_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[0].br));
+ cs1_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[1].br));
+
+ lbc_lcs0_ba = ioremap(cs0_addr, 1);
+ lbc_lcs1_ba = ioremap(cs1_addr, 1);
+
/* Make sure we're in indirect mode first. */
if ((in_be32(&guts->pmuxcr) & PMUXCR_ELBCDIU_MASK) !=
PMUXCR_ELBCDIU_DIU) {
@@ -254,10 +329,15 @@
iounmap(lbc_lcs1_ba);
if (lbc_lcs0_ba)
iounmap(lbc_lcs0_ba);
+ if (lbc)
+ iounmap(lbc);
+ if (ecm)
+ iounmap(ecm);
if (guts)
iounmap(guts);
- of_node_put(indirect_node);
+ of_node_put(law_node);
+ of_node_put(lbc_node);
of_node_put(guts_node);
}
@@ -348,13 +428,7 @@
*/
static void __init disable_one_node(struct device_node *np, struct property *new)
{
- struct property *old;
-
- old = of_find_property(np, new->name, NULL);
- if (old)
- prom_update_property(np, new, old);
- else
- prom_add_property(np, new);
+ prom_update_property(np, new);
}
/* TRUE if there is a "video=fslfb" command-line parameter. */
@@ -450,7 +524,7 @@
mpc85xx_smp_init();
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/p3060_qds.c b/arch/powerpc/platforms/85xx/p3060_qds.c
deleted file mode 100644
index 081cf4a..0000000
--- a/arch/powerpc/platforms/85xx/p3060_qds.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * P3060 QDS Setup
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/phy.h>
-#include <asm/machdep.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init p3060_qds_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
- extern struct smp_ops_t smp_85xx_ops;
-#endif
-
- if (of_flat_dt_is_compatible(root, "fsl,P3060QDS"))
- return 1;
-
- /* Check if we're running under the Freescale hypervisor */
- if (of_flat_dt_is_compatible(root, "fsl,P3060QDS-hv")) {
- ppc_md.init_IRQ = ehv_pic_init;
- ppc_md.get_irq = ehv_pic_get_irq;
- ppc_md.restart = fsl_hv_restart;
- ppc_md.power_off = fsl_hv_halt;
- ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
- /*
- * Disable the timebase sync operations because we can't write
- * to the timebase registers under the hypervisor.
- */
- smp_85xx_ops.give_timebase = NULL;
- smp_85xx_ops.take_timebase = NULL;
-#endif
- return 1;
- }
-
- return 0;
-}
-
-define_machine(p3060_qds) {
- .name = "P3060 QDS",
- .probe = p3060_qds_probe,
- .setup_arch = corenet_ds_setup_arch,
- .init_IRQ = corenet_ds_pic_init,
-#ifdef CONFIG_PCI
- .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
-#endif
- .get_irq = mpic_get_coreint_irq,
- .restart = fsl_rstcr_restart,
- .calibrate_decr = generic_calibrate_decr,
- .progress = udbg_progress,
- .power_save = e500_idle,
-};
-
-machine_device_initcall(p3060_qds, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier);
-#endif
diff --git a/arch/powerpc/platforms/85xx/qemu_e500.c b/arch/powerpc/platforms/85xx/qemu_e500.c
new file mode 100644
index 0000000..95a2e53
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/qemu_e500.c
@@ -0,0 +1,72 @@
+/*
+ * Paravirt target for a generic QEMU e500 machine
+ *
+ * This is intended to be a flexible device-tree-driven platform, not fixed
+ * to a particular piece of hardware or a particular spec of virtual hardware,
+ * beyond the assumption of an e500-family CPU. Some things are still hardcoded
+ * here, such as MPIC, but this is a limitation of the current code rather than
+ * an interface contract with QEMU.
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_fdt.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include "smp.h"
+#include "mpc85xx.h"
+
+void __init qemu_e500_pic_init(void)
+{
+ struct mpic *mpic;
+
+ mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+
+ BUG_ON(mpic == NULL);
+ mpic_init(mpic);
+}
+
+static void __init qemu_e500_setup_arch(void)
+{
+ ppc_md.progress("qemu_e500_setup_arch()", 0);
+
+ fsl_pci_init();
+ mpc85xx_smp_init();
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init qemu_e500_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return !!of_flat_dt_is_compatible(root, "fsl,qemu-e500");
+}
+
+machine_device_initcall(qemu_e500, mpc85xx_common_publish_devices);
+
+define_machine(qemu_e500) {
+ .name = "QEMU e500",
+ .probe = qemu_e500_probe,
+ .setup_arch = qemu_e500_setup_arch,
+ .init_IRQ = qemu_e500_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
deleted file mode 100644
index b1be632..0000000
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * Wind River SBC8560 setup and early boot code.
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * By Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * Based largely on the MPC8560ADS support - Copyright 2005 Freescale Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/of_platform.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpic.h>
-#include <mm/mmu_decl.h>
-#include <asm/udbg.h>
-
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-
-#include "mpc85xx.h"
-
-#ifdef CONFIG_CPM2
-#include <asm/cpm2.h>
-#include <sysdev/cpm2_pic.h>
-#endif
-
-static void __init sbc8560_pic_init(void)
-{
- struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
- 0, 256, " OpenPIC ");
- BUG_ON(mpic == NULL);
- mpic_init(mpic);
-
- mpc85xx_cpm2_pic_init();
-}
-
-/*
- * Setup the architecture
- */
-#ifdef CONFIG_CPM2
-struct cpm_pin {
- int port, pin, flags;
-};
-
-static const struct cpm_pin sbc8560_pins[] = {
- /* SCC1 */
- {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
- {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-
- /* SCC2 */
- {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-
- /* FCC2 */
- {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
- {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
- {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */
-
- /* FCC3 */
- {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
- {2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
-};
-
-static void __init init_ioports(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) {
- const struct cpm_pin *pin = &sbc8560_pins[i];
- cpm2_set_pin(pin->port, pin->pin, pin->flags);
- }
-
- cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
- cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
- cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
- cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
- cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
- cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
- cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
- cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
-}
-#endif
-
-static void __init sbc8560_setup_arch(void)
-{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
- if (ppc_md.progress)
- ppc_md.progress("sbc8560_setup_arch()", 0);
-
-#ifdef CONFIG_CPM2
- cpm2_reset();
- init_ioports();
-#endif
-
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
- fsl_add_bridge(np, 1);
-#endif
-}
-
-static void sbc8560_show_cpuinfo(struct seq_file *m)
-{
- uint pvid, svid, phid1;
-
- pvid = mfspr(SPRN_PVR);
- svid = mfspr(SPRN_SVR);
-
- seq_printf(m, "Vendor\t\t: Wind River\n");
- seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
- seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
- /* Display cpu Pll setting */
- phid1 = mfspr(SPRN_HID1);
- seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-}
-
-machine_device_initcall(sbc8560, mpc85xx_common_publish_devices);
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init sbc8560_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- return of_flat_dt_is_compatible(root, "SBC8560");
-}
-
-#ifdef CONFIG_RTC_DRV_M48T59
-static int __init sbc8560_rtc_init(void)
-{
- struct device_node *np;
- struct resource res;
- struct platform_device *rtc_dev;
-
- np = of_find_compatible_node(NULL, NULL, "m48t59");
- if (np == NULL) {
- printk("No RTC in DTB. Has it been eaten by wild dogs?\n");
- return -ENODEV;
- }
-
- of_address_to_resource(np, 0, &res);
- of_node_put(np);
-
- printk("Found RTC (m48t59) at i/o 0x%x\n", res.start);
-
- rtc_dev = platform_device_register_simple("rtc-m48t59", 0, &res, 1);
-
- if (IS_ERR(rtc_dev)) {
- printk("Registering sbc8560 RTC device failed\n");
- return PTR_ERR(rtc_dev);
- }
-
- return 0;
-}
-
-arch_initcall(sbc8560_rtc_init);
-
-#endif /* M48T59 */
-
-static __u8 __iomem *brstcr;
-
-static int __init sbc8560_bdrstcr_init(void)
-{
- struct device_node *np;
- struct resource res;
-
- np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr");
- if (np == NULL) {
- printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n");
- return -ENODEV;
- }
-
- of_address_to_resource(np, 0, &res);
-
- printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res);
-
- brstcr = ioremap(res.start, resource_size(&res));
- if(!brstcr)
- printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n");
-
- of_node_put(np);
-
- return 0;
-}
-
-arch_initcall(sbc8560_bdrstcr_init);
-
-void sbc8560_rstcr_restart(char * cmd)
-{
- local_irq_disable();
- if(brstcr)
- clrbits8(brstcr, 0x80);
-
- while(1);
-}
-
-define_machine(sbc8560) {
- .name = "SBC8560",
- .probe = sbc8560_probe,
- .setup_arch = sbc8560_setup_arch,
- .init_IRQ = sbc8560_pic_init,
- .show_cpuinfo = sbc8560_show_cpuinfo,
- .get_irq = mpic_get_irq,
- .restart = sbc8560_rstcr_restart,
- .calibrate_decr = generic_calibrate_decr,
- .progress = udbg_progress,
-};
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 3755e61..817245b 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -102,7 +102,7 @@
#endif
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 61c9550..30fd01d 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -159,6 +159,10 @@
bool "e500mc Support"
select PPC_FPU
depends on E500
+ help
+ This must be enabled for running on e500mc (and derivatives
+ such as e5500/e6500), and must be disabled for running on
+ e500v1 or e500v2.
config PPC_FPU
bool
diff --git a/arch/powerpc/platforms/cell/beat_hvCall.S b/arch/powerpc/platforms/cell/beat_hvCall.S
index 74c8174..96c8019 100644
--- a/arch/powerpc/platforms/cell/beat_hvCall.S
+++ b/arch/powerpc/platforms/cell/beat_hvCall.S
@@ -22,8 +22,6 @@
#include <asm/ppc_asm.h>
-#define STK_PARM(i) (48 + ((i)-3)*8)
-
/* Not implemented on Beat, now */
#define HCALL_INST_PRECALL
#define HCALL_INST_POSTCALL
@@ -74,7 +72,7 @@
mr r6,r7
mr r7,r8
mr r8,r9
- ld r10,STK_PARM(r10)(r1)
+ ld r10,STK_PARAM(R10)(r1)
HVSC /* invoke the hypervisor */
@@ -94,7 +92,7 @@
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -108,7 +106,7 @@
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
lwz r0,8(r1)
@@ -125,7 +123,7 @@
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -139,7 +137,7 @@
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
@@ -157,7 +155,7 @@
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -171,7 +169,7 @@
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -190,7 +188,7 @@
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -204,7 +202,7 @@
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -224,7 +222,7 @@
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -238,7 +236,7 @@
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -259,7 +257,7 @@
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -273,7 +271,7 @@
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index b9f509a..c264969 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -518,7 +518,6 @@
__set_bit(0, window->table.it_map);
tce_build_cell(&window->table, window->table.it_offset, 1,
(unsigned long)iommu->pad_page, DMA_TO_DEVICE, NULL);
- window->table.it_hint = window->table.it_blocksize;
return window;
}
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
index efdacc8..d17e98b 100644
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -42,11 +42,9 @@
{
unsigned long ctrl, thread_switch_control;
- /*
- * We need to hard disable interrupts, the local_irq_enable() done by
- * our caller upon return will hard re-enable.
- */
- hard_irq_disable();
+ /* Ensure our interrupt state is properly tracked */
+ if (!prep_irq_for_idle())
+ return;
ctrl = mfspr(SPRN_CTRLF);
@@ -81,6 +79,9 @@
*/
ctrl &= ~(CTRL_RUNLATCH | CTRL_TE);
mtspr(SPRN_CTRLT, ctrl);
+
+ /* Re-enable interrupts in MSR */
+ __hard_irq_enable();
}
static int cbe_system_reset_exception(struct pt_regs *regs)
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 66519d2..d544d78 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -317,28 +317,23 @@
return ret;
}
-static int spufs_context_open(struct dentry *dentry, struct vfsmount *mnt)
+static int spufs_context_open(struct path *path)
{
int ret;
struct file *filp;
ret = get_unused_fd();
- if (ret < 0) {
- dput(dentry);
- mntput(mnt);
- goto out;
- }
+ if (ret < 0)
+ return ret;
- filp = dentry_open(dentry, mnt, O_RDONLY, current_cred());
+ filp = dentry_open(path, O_RDONLY, current_cred());
if (IS_ERR(filp)) {
put_unused_fd(ret);
- ret = PTR_ERR(filp);
- goto out;
+ return PTR_ERR(filp);
}
filp->f_op = &spufs_context_fops;
fd_install(ret, filp);
-out:
return ret;
}
@@ -453,6 +448,7 @@
int affinity;
struct spu_gang *gang;
struct spu_context *neighbor;
+ struct path path = {.mnt = mnt, .dentry = dentry};
ret = -EPERM;
if ((flags & SPU_CREATE_NOSCHED) &&
@@ -495,11 +491,7 @@
put_spu_context(neighbor);
}
- /*
- * get references for dget and mntget, will be released
- * in error path of *_open().
- */
- ret = spufs_context_open(dget(dentry), mntget(mnt));
+ ret = spufs_context_open(&path);
if (ret < 0) {
WARN_ON(spufs_rmdir(inode, dentry));
if (affinity)
@@ -556,28 +548,27 @@
return ret;
}
-static int spufs_gang_open(struct dentry *dentry, struct vfsmount *mnt)
+static int spufs_gang_open(struct path *path)
{
int ret;
struct file *filp;
ret = get_unused_fd();
- if (ret < 0) {
- dput(dentry);
- mntput(mnt);
- goto out;
- }
+ if (ret < 0)
+ return ret;
- filp = dentry_open(dentry, mnt, O_RDONLY, current_cred());
+ /*
+ * get references for dget and mntget, will be released
+ * in error path of *_open().
+ */
+ filp = dentry_open(path, O_RDONLY, current_cred());
if (IS_ERR(filp)) {
put_unused_fd(ret);
- ret = PTR_ERR(filp);
- goto out;
+ return PTR_ERR(filp);
}
filp->f_op = &simple_dir_operations;
fd_install(ret, filp);
-out:
return ret;
}
@@ -585,17 +576,14 @@
struct dentry *dentry,
struct vfsmount *mnt, umode_t mode)
{
+ struct path path = {.mnt = mnt, .dentry = dentry};
int ret;
ret = spufs_mkgang(inode, dentry, mode & S_IRWXUGO);
if (ret)
goto out;
- /*
- * get references for dget and mntget, will be released
- * in error path of *_open().
- */
- ret = spufs_gang_open(dget(dentry), mntget(mnt));
+ ret = spufs_gang_open(&path);
if (ret < 0) {
int err = simple_rmdir(inode, dentry);
WARN_ON(err);
diff --git a/arch/powerpc/platforms/powernv/opal-takeover.S b/arch/powerpc/platforms/powernv/opal-takeover.S
index 77b48b2..3cd2628 100644
--- a/arch/powerpc/platforms/powernv/opal-takeover.S
+++ b/arch/powerpc/platforms/powernv/opal-takeover.S
@@ -14,8 +14,6 @@
#include <asm/asm-offsets.h>
#include <asm/opal.h>
-#define STK_PARAM(i) (48 + ((i)-3)*8)
-
#define H_HAL_TAKEOVER 0x5124
#define H_HAL_TAKEOVER_QUERY_MAGIC -1
@@ -23,14 +21,14 @@
_GLOBAL(opal_query_takeover)
mfcr r0
stw r0,8(r1)
- std r3,STK_PARAM(r3)(r1)
- std r4,STK_PARAM(r4)(r1)
+ std r3,STK_PARAM(R3)(r1)
+ std r4,STK_PARAM(R4)(r1)
li r3,H_HAL_TAKEOVER
li r4,H_HAL_TAKEOVER_QUERY_MAGIC
HVSC
- ld r10,STK_PARAM(r3)(r1)
+ ld r10,STK_PARAM(R3)(r1)
std r4,0(r10)
- ld r10,STK_PARAM(r4)(r1)
+ ld r10,STK_PARAM(R4)(r1)
std r5,0(r10)
lwz r0,8(r1)
mtcrf 0xff,r0
diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c
index 4cb375c..fb50631 100644
--- a/arch/powerpc/platforms/pseries/eeh_event.c
+++ b/arch/powerpc/platforms/pseries/eeh_event.c
@@ -85,8 +85,10 @@
set_current_state(TASK_INTERRUPTIBLE); /* Don't add to load average */
edev = handle_eeh_events(event);
- eeh_clear_slot(eeh_dev_to_of_node(edev), EEH_MODE_RECOVERING);
- pci_dev_put(edev->pdev);
+ if (edev) {
+ eeh_clear_slot(eeh_dev_to_of_node(edev), EEH_MODE_RECOVERING);
+ pci_dev_put(edev->pdev);
+ }
kfree(event);
mutex_unlock(&eeh_event_mutex);
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 8752f79..c33360ec 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -81,7 +81,7 @@
ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2");
ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info");
ibm_configure_pe = rtas_token("ibm,configure-pe");
- ibm_configure_bridge = rtas_token ("ibm,configure-bridge");
+ ibm_configure_bridge = rtas_token("ibm,configure-bridge");
/* necessary sanity check */
if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) {
@@ -89,7 +89,7 @@
__func__);
return -EINVAL;
} else if (ibm_set_slot_reset == RTAS_UNKNOWN_SERVICE) {
- pr_warning("%s: RTAS service <ibm, set-slot-reset> invalid\n",
+ pr_warning("%s: RTAS service <ibm,set-slot-reset> invalid\n",
__func__);
return -EINVAL;
} else if (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE &&
diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S
index 3ce73d0..444fe77 100644
--- a/arch/powerpc/platforms/pseries/hvCall.S
+++ b/arch/powerpc/platforms/pseries/hvCall.S
@@ -13,8 +13,6 @@
#include <asm/asm-offsets.h>
#include <asm/ptrace.h>
-#define STK_PARM(i) (48 + ((i)-3)*8)
-
#ifdef CONFIG_TRACEPOINTS
.section ".toc","aw"
@@ -26,7 +24,7 @@
.section ".text"
/*
- * precall must preserve all registers. use unused STK_PARM()
+ * precall must preserve all registers. use unused STK_PARAM()
* areas to save snapshots and opcode. We branch around this
* in early init (eg when populating the MMU hashtable) by using an
* unconditional cpu feature.
@@ -40,28 +38,28 @@
cmpdi r12,0; \
beq+ 1f; \
mflr r0; \
- std r3,STK_PARM(r3)(r1); \
- std r4,STK_PARM(r4)(r1); \
- std r5,STK_PARM(r5)(r1); \
- std r6,STK_PARM(r6)(r1); \
- std r7,STK_PARM(r7)(r1); \
- std r8,STK_PARM(r8)(r1); \
- std r9,STK_PARM(r9)(r1); \
- std r10,STK_PARM(r10)(r1); \
+ std r3,STK_PARAM(R3)(r1); \
+ std r4,STK_PARAM(R4)(r1); \
+ std r5,STK_PARAM(R5)(r1); \
+ std r6,STK_PARAM(R6)(r1); \
+ std r7,STK_PARAM(R7)(r1); \
+ std r8,STK_PARAM(R8)(r1); \
+ std r9,STK_PARAM(R9)(r1); \
+ std r10,STK_PARAM(R10)(r1); \
std r0,16(r1); \
- addi r4,r1,STK_PARM(FIRST_REG); \
+ addi r4,r1,STK_PARAM(FIRST_REG); \
stdu r1,-STACK_FRAME_OVERHEAD(r1); \
bl .__trace_hcall_entry; \
addi r1,r1,STACK_FRAME_OVERHEAD; \
ld r0,16(r1); \
- ld r3,STK_PARM(r3)(r1); \
- ld r4,STK_PARM(r4)(r1); \
- ld r5,STK_PARM(r5)(r1); \
- ld r6,STK_PARM(r6)(r1); \
- ld r7,STK_PARM(r7)(r1); \
- ld r8,STK_PARM(r8)(r1); \
- ld r9,STK_PARM(r9)(r1); \
- ld r10,STK_PARM(r10)(r1); \
+ ld r3,STK_PARAM(R3)(r1); \
+ ld r4,STK_PARAM(R4)(r1); \
+ ld r5,STK_PARAM(R5)(r1); \
+ ld r6,STK_PARAM(R6)(r1); \
+ ld r7,STK_PARAM(R7)(r1); \
+ ld r8,STK_PARAM(R8)(r1); \
+ ld r9,STK_PARAM(R9)(r1); \
+ ld r10,STK_PARAM(R10)(r1); \
mtlr r0; \
1:
@@ -79,8 +77,8 @@
cmpdi r12,0; \
beq+ 1f; \
mflr r0; \
- ld r6,STK_PARM(r3)(r1); \
- std r3,STK_PARM(r3)(r1); \
+ ld r6,STK_PARAM(R3)(r1); \
+ std r3,STK_PARAM(R3)(r1); \
mr r4,r3; \
mr r3,r6; \
std r0,16(r1); \
@@ -88,7 +86,7 @@
bl .__trace_hcall_exit; \
addi r1,r1,STACK_FRAME_OVERHEAD; \
ld r0,16(r1); \
- ld r3,STK_PARM(r3)(r1); \
+ ld r3,STK_PARAM(R3)(r1); \
mtlr r0; \
1:
@@ -114,7 +112,7 @@
mfcr r0
stw r0,8(r1)
- HCALL_INST_PRECALL(r4)
+ HCALL_INST_PRECALL(R4)
HVSC /* invoke the hypervisor */
@@ -130,9 +128,9 @@
mfcr r0
stw r0,8(r1)
- HCALL_INST_PRECALL(r5)
+ HCALL_INST_PRECALL(R5)
- std r4,STK_PARM(r4)(r1) /* Save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -143,7 +141,7 @@
HVSC /* invoke the hypervisor */
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -168,7 +166,7 @@
mfcr r0
stw r0,8(r1)
- std r4,STK_PARM(r4)(r1) /* Save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -179,7 +177,7 @@
HVSC /* invoke the hypervisor */
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -196,9 +194,9 @@
mfcr r0
stw r0,8(r1)
- HCALL_INST_PRECALL(r5)
+ HCALL_INST_PRECALL(R5)
- std r4,STK_PARM(r4)(r1) /* Save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -206,14 +204,14 @@
mr r7,r8
mr r8,r9
mr r9,r10
- ld r10,STK_PARM(r11)(r1) /* put arg7 in R10 */
- ld r11,STK_PARM(r12)(r1) /* put arg8 in R11 */
- ld r12,STK_PARM(r13)(r1) /* put arg9 in R12 */
+ ld r10,STK_PARAM(R11)(r1) /* put arg7 in R10 */
+ ld r11,STK_PARAM(R12)(r1) /* put arg8 in R11 */
+ ld r12,STK_PARAM(R13)(r1) /* put arg9 in R12 */
HVSC /* invoke the hypervisor */
mr r0,r12
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -238,7 +236,7 @@
mfcr r0
stw r0,8(r1)
- std r4,STK_PARM(r4)(r1) /* Save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -246,14 +244,14 @@
mr r7,r8
mr r8,r9
mr r9,r10
- ld r10,STK_PARM(r11)(r1) /* put arg7 in R10 */
- ld r11,STK_PARM(r12)(r1) /* put arg8 in R11 */
- ld r12,STK_PARM(r13)(r1) /* put arg9 in R12 */
+ ld r10,STK_PARAM(R11)(r1) /* put arg7 in R10 */
+ ld r11,STK_PARAM(R12)(r1) /* put arg8 in R11 */
+ ld r12,STK_PARAM(R13)(r1) /* put arg9 in R12 */
HVSC /* invoke the hypervisor */
mr r0,r12
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 0915b1a..07c09cb 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -106,7 +106,7 @@
tcep++;
}
- if (tbl->it_type == TCE_PCI_SWINV_CREATE)
+ if (tbl->it_type & TCE_PCI_SWINV_CREATE)
tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
return 0;
}
@@ -121,7 +121,7 @@
while (npages--)
*(tcep++) = 0;
- if (tbl->it_type == TCE_PCI_SWINV_FREE)
+ if (tbl->it_type & TCE_PCI_SWINV_FREE)
tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
}
@@ -192,12 +192,15 @@
long l, limit;
long tcenum_start = tcenum, npages_start = npages;
int ret = 0;
+ unsigned long flags;
if (npages == 1) {
return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
direction, attrs);
}
+ local_irq_save(flags); /* to protect tcep and the page behind it */
+
tcep = __get_cpu_var(tce_page);
/* This is safe to do since interrupts are off when we're called
@@ -207,6 +210,7 @@
tcep = (u64 *)__get_free_page(GFP_ATOMIC);
/* If allocation fails, fall back to the loop implementation */
if (!tcep) {
+ local_irq_restore(flags);
return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
direction, attrs);
}
@@ -240,6 +244,8 @@
tcenum += limit;
} while (npages > 0 && !rc);
+ local_irq_restore(flags);
+
if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
ret = (int)rc;
tce_freemulti_pSeriesLP(tbl, tcenum_start,
@@ -707,6 +713,21 @@
early_param("disable_ddw", disable_ddw_setup);
+static inline void __remove_ddw(struct device_node *np, const u32 *ddw_avail, u64 liobn)
+{
+ int ret;
+
+ ret = rtas_call(ddw_avail[2], 1, 1, NULL, liobn);
+ if (ret)
+ pr_warning("%s: failed to remove DMA window: rtas returned "
+ "%d to ibm,remove-pe-dma-window(%x) %llx\n",
+ np->full_name, ret, ddw_avail[2], liobn);
+ else
+ pr_debug("%s: successfully removed DMA window: rtas returned "
+ "%d to ibm,remove-pe-dma-window(%x) %llx\n",
+ np->full_name, ret, ddw_avail[2], liobn);
+}
+
static void remove_ddw(struct device_node *np)
{
struct dynamic_dma_window_prop *dwp;
@@ -736,15 +757,7 @@
pr_debug("%s successfully cleared tces in window.\n",
np->full_name);
- ret = rtas_call(ddw_avail[2], 1, 1, NULL, liobn);
- if (ret)
- pr_warning("%s: failed to remove direct window: rtas returned "
- "%d to ibm,remove-pe-dma-window(%x) %llx\n",
- np->full_name, ret, ddw_avail[2], liobn);
- else
- pr_debug("%s: successfully removed direct window: rtas returned "
- "%d to ibm,remove-pe-dma-window(%x) %llx\n",
- np->full_name, ret, ddw_avail[2], liobn);
+ __remove_ddw(np, ddw_avail, liobn);
delprop:
ret = prom_remove_property(np, win64);
@@ -869,6 +882,35 @@
return ret;
}
+static void restore_default_window(struct pci_dev *dev,
+ u32 ddw_restore_token, unsigned long liobn)
+{
+ struct eeh_dev *edev;
+ u32 cfg_addr;
+ u64 buid;
+ int ret;
+
+ /*
+ * Get the config address and phb buid of the PE window.
+ * Rely on eeh to retrieve this for us.
+ * Retrieve them from the pci device, not the node with the
+ * dma-window property
+ */
+ edev = pci_dev_to_eeh_dev(dev);
+ cfg_addr = edev->config_addr;
+ if (edev->pe_config_addr)
+ cfg_addr = edev->pe_config_addr;
+ buid = edev->phb->buid;
+
+ do {
+ ret = rtas_call(ddw_restore_token, 3, 1, NULL, cfg_addr,
+ BUID_HI(buid), BUID_LO(buid));
+ } while (rtas_busy_delay(ret));
+ dev_info(&dev->dev,
+ "ibm,reset-pe-dma-windows(%x) %x %x %x returned %d\n",
+ ddw_restore_token, cfg_addr, BUID_HI(buid), BUID_LO(buid), ret);
+}
+
/*
* If the PE supports dynamic dma windows, and there is space for a table
* that can map all pages in a linear offset, then setup such a table,
@@ -889,9 +931,13 @@
u64 dma_addr, max_addr;
struct device_node *dn;
const u32 *uninitialized_var(ddw_avail);
+ const u32 *uninitialized_var(ddw_extensions);
+ u32 ddw_restore_token = 0;
struct direct_window *window;
struct property *win64;
struct dynamic_dma_window_prop *ddwprop;
+ const void *dma_window = NULL;
+ unsigned long liobn, offset, size;
mutex_lock(&direct_window_init_mutex);
@@ -911,7 +957,40 @@
if (!ddw_avail || len < 3 * sizeof(u32))
goto out_unlock;
- /*
+ /*
+ * the extensions property is only required to exist in certain
+ * levels of firmware and later
+ * the ibm,ddw-extensions property is a list with the first
+ * element containing the number of extensions and each
+ * subsequent entry is a value corresponding to that extension
+ */
+ ddw_extensions = of_get_property(pdn, "ibm,ddw-extensions", &len);
+ if (ddw_extensions) {
+ /*
+ * each new defined extension length should be added to
+ * the top of the switch so the "earlier" entries also
+ * get picked up
+ */
+ switch (ddw_extensions[0]) {
+ /* ibm,reset-pe-dma-windows */
+ case 1:
+ ddw_restore_token = ddw_extensions[1];
+ break;
+ }
+ }
+
+ /*
+ * Only remove the existing DMA window if we can restore back to
+ * the default state. Removing the existing window maximizes the
+ * resources available to firmware for dynamic window creation.
+ */
+ if (ddw_restore_token) {
+ dma_window = of_get_property(pdn, "ibm,dma-window", NULL);
+ of_parse_dma_window(pdn, dma_window, &liobn, &offset, &size);
+ __remove_ddw(pdn, ddw_avail, liobn);
+ }
+
+ /*
* Query if there is a second window of size to map the
* whole partition. Query returns number of windows, largest
* block assigned to PE (partition endpoint), and two bitmasks
@@ -920,7 +999,7 @@
dn = pci_device_to_OF_node(dev);
ret = query_ddw(dev, ddw_avail, &query);
if (ret != 0)
- goto out_unlock;
+ goto out_restore_window;
if (query.windows_available == 0) {
/*
@@ -929,7 +1008,7 @@
* trading in for a larger page size.
*/
dev_dbg(&dev->dev, "no free dynamic windows");
- goto out_unlock;
+ goto out_restore_window;
}
if (query.page_size & 4) {
page_shift = 24; /* 16MB */
@@ -940,7 +1019,7 @@
} else {
dev_dbg(&dev->dev, "no supported direct page size in mask %x",
query.page_size);
- goto out_unlock;
+ goto out_restore_window;
}
/* verify the window * number of ptes will map the partition */
/* check largest block * page size > max memory hotplug addr */
@@ -949,14 +1028,14 @@
dev_dbg(&dev->dev, "can't map partiton max 0x%llx with %u "
"%llu-sized pages\n", max_addr, query.largest_available_block,
1ULL << page_shift);
- goto out_unlock;
+ goto out_restore_window;
}
len = order_base_2(max_addr);
win64 = kzalloc(sizeof(struct property), GFP_KERNEL);
if (!win64) {
dev_info(&dev->dev,
"couldn't allocate property for 64bit dma window\n");
- goto out_unlock;
+ goto out_restore_window;
}
win64->name = kstrdup(DIRECT64_PROPNAME, GFP_KERNEL);
win64->value = ddwprop = kmalloc(sizeof(*ddwprop), GFP_KERNEL);
@@ -1018,6 +1097,10 @@
kfree(win64->value);
kfree(win64);
+out_restore_window:
+ if (ddw_restore_token)
+ restore_default_window(dev, ddw_restore_token, liobn);
+
out_unlock:
mutex_unlock(&direct_window_init_mutex);
return dma_addr;
diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index 029a562..dd30b12 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -67,7 +67,6 @@
const char *name, u32 vd, char *value)
{
struct property *new_prop = *prop;
- struct property *old_prop;
int more = 0;
/* A negative 'vd' value indicates that only part of the new property
@@ -117,12 +116,7 @@
}
if (!more) {
- old_prop = of_find_property(dn, new_prop->name, NULL);
- if (old_prop)
- prom_update_property(dn, new_prop, old_prop);
- else
- prom_add_property(dn, new_prop);
-
+ prom_update_property(dn, new_prop);
new_prop = NULL;
}
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index 36f957f..8733a86 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -68,9 +68,7 @@
};
static void oops_to_nvram(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *old_msgs, unsigned long old_len,
- const char *new_msgs, unsigned long new_len);
+ enum kmsg_dump_reason reason);
static struct kmsg_dumper nvram_kmsg_dumper = {
.dump = oops_to_nvram
@@ -504,28 +502,6 @@
}
/*
- * Try to capture the last capture_len bytes of the printk buffer. Return
- * the amount actually captured.
- */
-static size_t capture_last_msgs(const char *old_msgs, size_t old_len,
- const char *new_msgs, size_t new_len,
- char *captured, size_t capture_len)
-{
- if (new_len >= capture_len) {
- memcpy(captured, new_msgs + (new_len - capture_len),
- capture_len);
- return capture_len;
- } else {
- /* Grab the end of old_msgs. */
- size_t old_tail_len = min(old_len, capture_len - new_len);
- memcpy(captured, old_msgs + (old_len - old_tail_len),
- old_tail_len);
- memcpy(captured + old_tail_len, new_msgs, new_len);
- return old_tail_len + new_len;
- }
-}
-
-/*
* Are we using the ibm,rtas-log for oops/panic reports? And if so,
* would logging this oops/panic overwrite an RTAS event that rtas_errd
* hasn't had a chance to read and process? Return 1 if so, else 0.
@@ -541,27 +517,6 @@
NVRAM_RTAS_READ_TIMEOUT);
}
-/* Squeeze out each line's <n> severity prefix. */
-static size_t elide_severities(char *buf, size_t len)
-{
- char *in, *out, *buf_end = buf + len;
- /* Assume a <n> at the very beginning marks the start of a line. */
- int newline = 1;
-
- in = out = buf;
- while (in < buf_end) {
- if (newline && in+3 <= buf_end &&
- *in == '<' && isdigit(in[1]) && in[2] == '>') {
- in += 3;
- newline = 0;
- } else {
- newline = (*in == '\n');
- *out++ = *in++;
- }
- }
- return out - buf;
-}
-
/* Derived from logfs_compress() */
static int nvram_compress(const void *in, void *out, size_t inlen,
size_t outlen)
@@ -619,9 +574,7 @@
* partition. If that's too much, go back and capture uncompressed text.
*/
static void oops_to_nvram(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *old_msgs, unsigned long old_len,
- const char *new_msgs, unsigned long new_len)
+ enum kmsg_dump_reason reason)
{
static unsigned int oops_count = 0;
static bool panicking = false;
@@ -660,14 +613,14 @@
return;
if (big_oops_buf) {
- text_len = capture_last_msgs(old_msgs, old_len,
- new_msgs, new_len, big_oops_buf, big_oops_buf_sz);
- text_len = elide_severities(big_oops_buf, text_len);
+ kmsg_dump_get_buffer(dumper, false,
+ big_oops_buf, big_oops_buf_sz, &text_len);
rc = zip_oops(text_len);
}
if (rc != 0) {
- text_len = capture_last_msgs(old_msgs, old_len,
- new_msgs, new_len, oops_data, oops_data_sz);
+ kmsg_dump_rewind(dumper);
+ kmsg_dump_get_buffer(dumper, true,
+ oops_data, oops_data_sz, &text_len);
err_type = ERR_TYPE_KERNEL_PANIC;
*oops_len = (u16) text_len;
}
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
index 41a34bc..455760b 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -11,6 +11,7 @@
#include <linux/moduleparam.h>
#include <linux/cpuidle.h>
#include <linux/cpu.h>
+#include <linux/notifier.h>
#include <asm/paca.h>
#include <asm/reg.h>
@@ -99,15 +100,18 @@
static void check_and_cede_processor(void)
{
/*
- * Interrupts are soft-disabled at this point,
- * but not hard disabled. So an interrupt might have
- * occurred before entering NAP, and would be potentially
- * lost (edge events, decrementer events, etc...) unless
- * we first hard disable then check.
+ * Ensure our interrupt state is properly tracked,
+ * also checks if no interrupt has occurred while we
+ * were soft-disabled
*/
- hard_irq_disable();
- if (get_paca()->irq_happened == 0)
+ if (prep_irq_for_idle()) {
cede_processor();
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Ensure that H_CEDE returns with IRQs on */
+ if (WARN_ON(!(mfmsr() & MSR_EE)))
+ __hard_irq_enable();
+#endif
+ }
}
static int dedicated_cede_loop(struct cpuidle_device *dev,
@@ -186,17 +190,40 @@
.enter = &shared_cede_loop },
};
-int pseries_notify_cpuidle_add_cpu(int cpu)
+static int pseries_cpuidle_add_cpu_notifier(struct notifier_block *n,
+ unsigned long action, void *hcpu)
{
+ int hotcpu = (unsigned long)hcpu;
struct cpuidle_device *dev =
- per_cpu_ptr(pseries_cpuidle_devices, cpu);
+ per_cpu_ptr(pseries_cpuidle_devices, hotcpu);
+
if (dev && cpuidle_get_driver()) {
- cpuidle_disable_device(dev);
- cpuidle_enable_device(dev);
+ switch (action) {
+ case CPU_ONLINE:
+ case CPU_ONLINE_FROZEN:
+ cpuidle_pause_and_lock();
+ cpuidle_enable_device(dev);
+ cpuidle_resume_and_unlock();
+ break;
+
+ case CPU_DEAD:
+ case CPU_DEAD_FROZEN:
+ cpuidle_pause_and_lock();
+ cpuidle_disable_device(dev);
+ cpuidle_resume_and_unlock();
+ break;
+
+ default:
+ return NOTIFY_DONE;
+ }
}
- return 0;
+ return NOTIFY_OK;
}
+static struct notifier_block setup_hotplug_notifier = {
+ .notifier_call = pseries_cpuidle_add_cpu_notifier,
+};
+
/*
* pseries_cpuidle_driver_init()
*/
@@ -321,6 +348,7 @@
return retval;
}
+ register_cpu_notifier(&setup_hotplug_notifier);
printk(KERN_DEBUG "pseries_idle_driver registered\n");
return 0;
@@ -329,6 +357,7 @@
static void __exit pseries_processor_idle_exit(void)
{
+ unregister_cpu_notifier(&setup_hotplug_notifier);
pseries_idle_devices_uninit();
cpuidle_unregister_driver(&pseries_idle_driver);
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 7b3bf76..39f71fb 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -432,7 +432,7 @@
unsigned char *value;
char *name, *end, *next_prop;
int rc, length;
- struct property *newprop, *oldprop;
+ struct property *newprop;
buf = parse_node(buf, bufsize, &np);
end = buf + bufsize;
@@ -443,6 +443,9 @@
if (!next_prop)
return -EINVAL;
+ if (!strlen(name))
+ return -ENODEV;
+
newprop = new_property(name, length, value, NULL);
if (!newprop)
return -ENOMEM;
@@ -450,18 +453,11 @@
if (!strcmp(name, "slb-size") || !strcmp(name, "ibm,slb-size"))
slb_set_size(*(int *)value);
- oldprop = of_find_property(np, name,NULL);
- if (!oldprop) {
- if (strlen(name))
- return prom_add_property(np, newprop);
- return -ENODEV;
- }
-
upd_value.node = np;
upd_value.property = newprop;
pSeries_reconfig_notify(PSERIES_UPDATE_PROPERTY, &upd_value);
- rc = prom_update_property(np, newprop, oldprop);
+ rc = prom_update_property(np, newprop);
if (rc)
return rc;
@@ -486,7 +482,7 @@
rc = pSeries_reconfig_notify(action, value);
if (rc) {
- prom_update_property(np, oldprop, newprop);
+ prom_update_property(np, newprop);
return rc;
}
}
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index e16bb8d..71706bc 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -147,7 +147,6 @@
set_cpu_current_state(cpu, CPU_STATE_ONLINE);
set_default_offline_state(cpu);
#endif
- pseries_notify_cpuidle_add_cpu(cpu);
}
static int __devinit smp_pSeries_kick_cpu(int nr)
diff --git a/arch/powerpc/sysdev/6xx-suspend.S b/arch/powerpc/sysdev/6xx-suspend.S
index 21cda085d..cf48e9c 100644
--- a/arch/powerpc/sysdev/6xx-suspend.S
+++ b/arch/powerpc/sysdev/6xx-suspend.S
@@ -29,7 +29,7 @@
ori r5, r5, ret_from_standby@l
mtlr r5
- rlwinm r5, r1, 0, 0, 31-THREAD_SHIFT
+ CURRENT_THREAD_INFO(r5, r1)
lwz r6, TI_LOCAL_FLAGS(r5)
ori r6, r6, _TLF_SLEEPING
stw r6, TI_LOCAL_FLAGS(r5)
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 6073288..a7b2a60 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -1,7 +1,7 @@
/*
* MPC83xx/85xx/86xx PCI/PCIE support routing.
*
- * Copyright 2007-2011 Freescale Semiconductor, Inc.
+ * Copyright 2007-2012 Freescale Semiconductor, Inc.
* Copyright 2008-2009 MontaVista Software, Inc.
*
* Initial author: Xianghua Xiao <x.xiao@freescale.com>
@@ -36,7 +36,7 @@
static int fsl_pcie_bus_fixup, is_mpc83xx_pci;
-static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
+static void __devinit quirk_fsl_pcie_header(struct pci_dev *dev)
{
u8 progif;
@@ -807,3 +807,72 @@
return 0;
}
+
+#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
+static const struct of_device_id pci_ids[] = {
+ { .compatible = "fsl,mpc8540-pci", },
+ { .compatible = "fsl,mpc8548-pcie", },
+ { .compatible = "fsl,mpc8610-pci", },
+ { .compatible = "fsl,mpc8641-pcie", },
+ { .compatible = "fsl,p1022-pcie", },
+ { .compatible = "fsl,p1010-pcie", },
+ { .compatible = "fsl,p1023-pcie", },
+ { .compatible = "fsl,p4080-pcie", },
+ { .compatible = "fsl,qoriq-pcie-v2.3", },
+ { .compatible = "fsl,qoriq-pcie-v2.2", },
+ {},
+};
+
+struct device_node *fsl_pci_primary;
+
+void __devinit fsl_pci_init(void)
+{
+ struct device_node *node;
+ struct pci_controller *hose;
+ dma_addr_t max = 0xffffffff;
+
+ /* Callers can specify the primary bus using other means. */
+ if (!fsl_pci_primary) {
+ /* If a PCI host bridge contains an ISA node, it's primary. */
+ node = of_find_node_by_type(NULL, "isa");
+ while ((fsl_pci_primary = of_get_parent(node))) {
+ of_node_put(node);
+ node = fsl_pci_primary;
+
+ if (of_match_node(pci_ids, node))
+ break;
+ }
+ }
+
+ node = NULL;
+ for_each_node_by_type(node, "pci") {
+ if (of_match_node(pci_ids, node)) {
+ /*
+ * If there's no PCI host bridge with ISA, arbitrarily
+ * designate one as primary. This can go away once
+ * various bugs with primary-less systems are fixed.
+ */
+ if (!fsl_pci_primary)
+ fsl_pci_primary = node;
+
+ fsl_add_bridge(node, fsl_pci_primary == node);
+ hose = pci_find_hose_for_OF_device(node);
+ max = min(max, hose->dma_window_base_cur +
+ hose->dma_window_size);
+ }
+ }
+
+#ifdef CONFIG_SWIOTLB
+ /*
+ * if we couldn't map all of DRAM via the dma windows
+ * we need SWIOTLB to handle buffers located outside of
+ * dma capable memory region
+ */
+ if (memblock_end_of_DRAM() - 1 > max) {
+ ppc_swiotlb_enable = 1;
+ set_pci_dma_ops(&swiotlb_dma_ops);
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+ }
+#endif
+}
+#endif
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index a39ed5c..baa0fd1 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -93,5 +93,13 @@
extern int mpc83xx_add_bridge(struct device_node *dev);
u64 fsl_pci_immrbar_base(struct pci_controller *hose);
+extern struct device_node *fsl_pci_primary;
+
+#ifdef CONFIG_FSL_PCI
+void fsl_pci_init(void);
+#else
+static inline void fsl_pci_init(void) {}
+#endif
+
#endif /* __POWERPC_FSL_PCI_H */
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 395af13..bfc6211 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1211,7 +1211,7 @@
if (of_get_property(node, "single-cpu-affinity", NULL))
flags |= MPIC_SINGLE_DEST_CPU;
if (of_device_is_compatible(node, "fsl,mpic"))
- flags |= MPIC_FSL;
+ flags |= MPIC_FSL | MPIC_LARGE_VECTORS;
mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
if (mpic == NULL)
@@ -1376,7 +1376,7 @@
mpic->isu_mask = (1 << mpic->isu_shift) - 1;
mpic->irqhost = irq_domain_add_linear(mpic->node,
- last_irq + 1,
+ intvec_top,
&mpic_host_ops, mpic);
/*
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 818e763..b043675 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -395,6 +395,9 @@
for (i = 0; i < be32_to_cpu(ucode->count); i++)
out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
+
+ /* Set I-RAM Ready Register */
+ out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY));
}
/*
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 0f3ab06..eab3492 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -971,7 +971,7 @@
/* print cpus waiting or in xmon */
printf("cpus stopped:");
count = 0;
- for (cpu = 0; cpu < NR_CPUS; ++cpu) {
+ for_each_possible_cpu(cpu) {
if (cpumask_test_cpu(cpu, &cpus_in_xmon)) {
if (count == 0)
printf(" %x", cpu);
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 15cca26..8dca9c2 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -717,9 +717,7 @@
init_cpu_vtimer();
pfault_init();
notify_cpu_starting(smp_processor_id());
- ipi_call_lock();
set_cpu_online(smp_processor_id(), true);
- ipi_call_unlock();
local_irq_enable();
/* cpu_idle will call schedule for us */
cpu_idle();
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 99bcd0e..a24595d 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -32,6 +32,8 @@
select GENERIC_SMP_IDLE_THREAD
select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
+ select GENERIC_STRNCPY_FROM_USER
+ select GENERIC_STRNLEN_USER
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
@@ -58,6 +60,7 @@
config SUPERH64
def_bool ARCH = "sh64"
+ select KALLSYMS
config ARCH_DEFCONFIG
string
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 46edf07..aed701c 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -9,6 +9,12 @@
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
+ifneq ($(SUBARCH),$(ARCH))
+ ifeq ($(CROSS_COMPILE),)
+ CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux- $(UTS_MACHINE)-linux-gnu- $(UTS_MACHINE)-unknown-linux-gnu-)
+ endif
+endif
+
isa-y := any
isa-$(CONFIG_SH_DSP) := sh
isa-$(CONFIG_CPU_SH2) := sh2
@@ -106,19 +112,13 @@
KBUILD_DEFCONFIG := cayman_defconfig
endif
-ifneq ($(SUBARCH),$(ARCH))
- ifeq ($(CROSS_COMPILE),)
- CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux- $(UTS_MACHINE)-linux-gnu- $(UTS_MACHINE)-unknown-linux-gnu-)
- endif
-endif
-
ifdef CONFIG_CPU_LITTLE_ENDIAN
ld-bfd := elf32-$(UTS_MACHINE)-linux
-LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64' --oformat $(ld-bfd)
+LDFLAGS_vmlinux += --defsym jiffies=jiffies_64 --oformat $(ld-bfd)
LDFLAGS += -EL
else
ld-bfd := elf32-$(UTS_MACHINE)big-linux
-LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' --oformat $(ld-bfd)
+LDFLAGS_vmlinux += --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd)
LDFLAGS += -EB
endif
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 1f56b35..7048c03 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -44,6 +44,8 @@
config SH_7722_SOLUTION_ENGINE
bool "SolutionEngine7722"
select SOLUTION_ENGINE
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
depends on CPU_SUBTYPE_SH7722
help
Select 7722 SolutionEngine if configuring for a Hitachi SH772
@@ -80,6 +82,8 @@
config SH_7343_SOLUTION_ENGINE
bool "SolutionEngine7343"
select SOLUTION_ENGINE
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
depends on CPU_SUBTYPE_SH7343
help
Select 7343 SolutionEngine if configuring for a Hitachi
@@ -295,6 +299,7 @@
bool "SH-X3 Prototype board"
depends on CPU_SUBTYPE_SHX3
select NO_IOPORT if !PCI
+ select IRQ_DOMAIN
config SH_MAGIC_PANEL_R2
bool "Magic Panel R2"
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
index f63d323..2789647 100644
--- a/arch/sh/boards/mach-dreamcast/irq.c
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -8,10 +8,11 @@
* This file is part of the LinuxDC project (www.linuxdc.org)
* Released under the terms of the GNU GPL v2.0
*/
-
#include <linux/irq.h>
#include <linux/io.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
+#include <linux/export.h>
+#include <linux/err.h>
#include <mach/sysasic.h>
/*
@@ -141,26 +142,15 @@
void systemasic_irq_init(void)
{
- int i, nid = cpu_to_node(boot_cpu_data);
+ int irq_base, i;
- /* Assign all virtual IRQs to the System ASIC int. handler */
- for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) {
- unsigned int irq;
-
- irq = create_irq_nr(i, nid);
- if (unlikely(irq == 0)) {
- pr_err("%s: failed hooking irq %d for systemasic\n",
- __func__, i);
- return;
- }
-
- if (unlikely(irq != i)) {
- pr_err("%s: got irq %d but wanted %d, bailing.\n",
- __func__, irq, i);
- destroy_irq(irq);
- return;
- }
-
- irq_set_chip_and_handler(i, &systemasic_int, handle_level_irq);
+ irq_base = irq_alloc_descs(HW_EVENT_IRQ_BASE, HW_EVENT_IRQ_BASE,
+ HW_EVENT_IRQ_MAX - HW_EVENT_IRQ_BASE, -1);
+ if (IS_ERR_VALUE(irq_base)) {
+ pr_err("%s: failed hooking irqs\n", __func__);
+ return;
}
+
+ for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
+ irq_set_chip_and_handler(i, &systemasic_int, handle_level_irq);
}
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 158c917..43a179c 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -201,8 +201,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = evtirq(0xa20),
- .end = evtirq(0xa20),
+ .start = evt2irq(0xa20),
+ .end = evt2irq(0xa20),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
},
};
diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
index fd45ffc..7646bf0 100644
--- a/arch/sh/boards/mach-se/7343/irq.c
+++ b/arch/sh/boards/mach-se/7343/irq.c
@@ -1,54 +1,109 @@
/*
- * linux/arch/sh/boards/se/7343/irq.c
+ * Hitachi UL SolutionEngine 7343 FPGA IRQ Support.
*
* Copyright (C) 2008 Yoshihiro Shimoda
+ * Copyright (C) 2012 Paul Mundt
*
- * Based on linux/arch/sh/boards/se/7722/irq.c
+ * Based on linux/arch/sh/boards/se/7343/irq.c
* Copyright (C) 2007 Nobuhiro Iwamatsu
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+#define DRV_NAME "SE7343-FPGA"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#define irq_reg_readl ioread16
+#define irq_reg_writel iowrite16
+
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
#include <linux/io.h>
+#include <asm/sizes.h>
#include <mach-se/mach/se7343.h>
-unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, };
+#define PA_CPLD_BASE_ADDR 0x11400000
+#define PA_CPLD_ST_REG 0x08 /* CPLD Interrupt status register */
+#define PA_CPLD_IMSK_REG 0x0a /* CPLD Interrupt mask register */
-static void disable_se7343_irq(struct irq_data *data)
-{
- unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
- __raw_writew(__raw_readw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
-}
-
-static void enable_se7343_irq(struct irq_data *data)
-{
- unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
- __raw_writew(__raw_readw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
-}
-
-static struct irq_chip se7343_irq_chip __read_mostly = {
- .name = "SE7343-FPGA",
- .irq_mask = disable_se7343_irq,
- .irq_unmask = enable_se7343_irq,
-};
+static void __iomem *se7343_irq_regs;
+struct irq_domain *se7343_irq_domain;
static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
{
- unsigned short intv = __raw_readw(PA_CPLD_ST);
- unsigned int ext_irq = 0;
+ struct irq_data *data = irq_get_irq_data(irq);
+ struct irq_chip *chip = irq_data_get_irq_chip(data);
+ unsigned long mask;
+ int bit;
- intv &= (1 << SE7343_FPGA_IRQ_NR) - 1;
+ chip->irq_mask_ack(data);
- for (; intv; intv >>= 1, ext_irq++) {
- if (!(intv & 1))
- continue;
+ mask = ioread16(se7343_irq_regs + PA_CPLD_ST_REG);
- generic_handle_irq(se7343_fpga_irq[ext_irq]);
+ for_each_set_bit(bit, &mask, SE7343_FPGA_IRQ_NR)
+ generic_handle_irq(irq_linear_revmap(se7343_irq_domain, bit));
+
+ chip->irq_unmask(data);
+}
+
+static void __init se7343_domain_init(void)
+{
+ int i;
+
+ se7343_irq_domain = irq_domain_add_linear(NULL, SE7343_FPGA_IRQ_NR,
+ &irq_domain_simple_ops, NULL);
+ if (unlikely(!se7343_irq_domain)) {
+ printk("Failed to get IRQ domain\n");
+ return;
}
+
+ for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
+ int irq = irq_create_mapping(se7343_irq_domain, i);
+
+ if (unlikely(irq == 0)) {
+ printk("Failed to allocate IRQ %d\n", i);
+ return;
+ }
+ }
+}
+
+static void __init se7343_gc_init(void)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ unsigned int irq_base;
+
+ irq_base = irq_linear_revmap(se7343_irq_domain, 0);
+
+ gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7343_irq_regs,
+ handle_level_irq);
+ if (unlikely(!gc))
+ return;
+
+ ct = gc->chip_types;
+ ct->chip.irq_mask = irq_gc_mask_set_bit;
+ ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+
+ ct->regs.mask = PA_CPLD_IMSK_REG;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(SE7343_FPGA_IRQ_NR),
+ IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+
+ irq_set_chained_handler(IRQ0_IRQ, se7343_irq_demux);
+ irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+ irq_set_chained_handler(IRQ1_IRQ, se7343_irq_demux);
+ irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+ irq_set_chained_handler(IRQ4_IRQ, se7343_irq_demux);
+ irq_set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+ irq_set_chained_handler(IRQ5_IRQ, se7343_irq_demux);
+ irq_set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
}
/*
@@ -56,31 +111,19 @@
*/
void __init init_7343se_IRQ(void)
{
- int i, irq;
-
- __raw_writew(0, PA_CPLD_IMSK); /* disable all irqs */
- __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
-
- for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
- irq = create_irq();
- if (irq < 0)
- return;
- se7343_fpga_irq[i] = irq;
-
- irq_set_chip_and_handler_name(se7343_fpga_irq[i],
- &se7343_irq_chip,
- handle_level_irq,
- "level");
-
- irq_set_chip_data(se7343_fpga_irq[i], (void *)i);
+ se7343_irq_regs = ioremap(PA_CPLD_BASE_ADDR, SZ_16);
+ if (unlikely(!se7343_irq_regs)) {
+ pr_err("Failed to remap CPLD\n");
+ return;
}
- irq_set_chained_handler(IRQ0_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
- irq_set_chained_handler(IRQ1_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
- irq_set_chained_handler(IRQ4_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
- irq_set_chained_handler(IRQ5_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
+ /*
+ * All FPGA IRQs disabled by default
+ */
+ iowrite16(0, se7343_irq_regs + PA_CPLD_IMSK_REG);
+
+ __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
+
+ se7343_domain_init();
+ se7343_gc_init();
}
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
index d2370af..8ce4f2a 100644
--- a/arch/sh/boards/mach-se/7343/setup.c
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -5,6 +5,7 @@
#include <linux/serial_reg.h>
#include <linux/usb/isp116x.h>
#include <linux/delay.h>
+#include <linux/irqdomain.h>
#include <asm/machvec.h>
#include <mach-se/mach/se7343.h>
#include <asm/heartbeat.h>
@@ -145,11 +146,12 @@
static int __init sh7343se_devices_setup(void)
{
/* Wire-up dynamic vectors */
- serial_platform_data[0].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTA];
- serial_platform_data[1].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTB];
-
+ serial_platform_data[0].irq = irq_find_mapping(se7343_irq_domain,
+ SE7343_FPGA_IRQ_UARTA);
+ serial_platform_data[1].irq = irq_find_mapping(se7343_irq_domain,
+ SE7343_FPGA_IRQ_UARTB);
usb_resources[2].start = usb_resources[2].end =
- se7343_fpga_irq[SE7343_FPGA_IRQ_USB];
+ irq_find_mapping(se7343_irq_domain, SE7343_FPGA_IRQ_USB);
return platform_add_devices(sh7343se_platform_devices,
ARRAY_SIZE(sh7343se_platform_devices));
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
index aac92f2..f5e2af1b 100644
--- a/arch/sh/boards/mach-se/7722/irq.c
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -1,79 +1,96 @@
/*
- * linux/arch/sh/boards/se/7722/irq.c
+ * Hitachi UL SolutionEngine 7722 FPGA IRQ Support.
*
* Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7722 Support.
+ * Copyright (C) 2012 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+#define DRV_NAME "SE7722-FPGA"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#define irq_reg_readl ioread16
+#define irq_reg_writel iowrite16
+
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <asm/sizes.h>
#include <mach-se/mach/se7722.h>
-unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, };
+#define IRQ01_BASE_ADDR 0x11800000
+#define IRQ01_MODE_REG 0
+#define IRQ01_STS_REG 4
+#define IRQ01_MASK_REG 8
-static void disable_se7722_irq(struct irq_data *data)
-{
- unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
- __raw_writew(__raw_readw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
-}
-
-static void enable_se7722_irq(struct irq_data *data)
-{
- unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
- __raw_writew(__raw_readw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
-}
-
-static struct irq_chip se7722_irq_chip __read_mostly = {
- .name = "SE7722-FPGA",
- .irq_mask = disable_se7722_irq,
- .irq_unmask = enable_se7722_irq,
-};
+static void __iomem *se7722_irq_regs;
+struct irq_domain *se7722_irq_domain;
static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
{
- unsigned short intv = __raw_readw(IRQ01_STS);
- unsigned int ext_irq = 0;
+ struct irq_data *data = irq_get_irq_data(irq);
+ struct irq_chip *chip = irq_data_get_irq_chip(data);
+ unsigned long mask;
+ int bit;
- intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
+ chip->irq_mask_ack(data);
- for (; intv; intv >>= 1, ext_irq++) {
- if (!(intv & 1))
- continue;
+ mask = ioread16(se7722_irq_regs + IRQ01_STS_REG);
- generic_handle_irq(se7722_fpga_irq[ext_irq]);
+ for_each_set_bit(bit, &mask, SE7722_FPGA_IRQ_NR)
+ generic_handle_irq(irq_linear_revmap(se7722_irq_domain, bit));
+
+ chip->irq_unmask(data);
+}
+
+static void __init se7722_domain_init(void)
+{
+ int i;
+
+ se7722_irq_domain = irq_domain_add_linear(NULL, SE7722_FPGA_IRQ_NR,
+ &irq_domain_simple_ops, NULL);
+ if (unlikely(!se7722_irq_domain)) {
+ printk("Failed to get IRQ domain\n");
+ return;
+ }
+
+ for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
+ int irq = irq_create_mapping(se7722_irq_domain, i);
+
+ if (unlikely(irq == 0)) {
+ printk("Failed to allocate IRQ %d\n", i);
+ return;
+ }
}
}
-/*
- * Initialize IRQ setting
- */
-void __init init_se7722_IRQ(void)
+static void __init se7722_gc_init(void)
{
- int i, irq;
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ unsigned int irq_base;
- __raw_writew(0, IRQ01_MASK); /* disable all irqs */
- __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
+ irq_base = irq_linear_revmap(se7722_irq_domain, 0);
- for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
- irq = create_irq();
- if (irq < 0)
- return;
- se7722_fpga_irq[i] = irq;
+ gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7722_irq_regs,
+ handle_level_irq);
+ if (unlikely(!gc))
+ return;
- irq_set_chip_and_handler_name(se7722_fpga_irq[i],
- &se7722_irq_chip,
- handle_level_irq,
- "level");
+ ct = gc->chip_types;
+ ct->chip.irq_mask = irq_gc_mask_set_bit;
+ ct->chip.irq_unmask = irq_gc_mask_clr_bit;
- irq_set_chip_data(se7722_fpga_irq[i], (void *)i);
- }
+ ct->regs.mask = IRQ01_MASK_REG;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(SE7722_FPGA_IRQ_NR),
+ IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST | IRQ_NOPROBE, 0);
irq_set_chained_handler(IRQ0_IRQ, se7722_irq_demux);
irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
@@ -81,3 +98,25 @@
irq_set_chained_handler(IRQ1_IRQ, se7722_irq_demux);
irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
}
+
+/*
+ * Initialize FPGA IRQs
+ */
+void __init init_se7722_IRQ(void)
+{
+ se7722_irq_regs = ioremap(IRQ01_BASE_ADDR, SZ_16);
+ if (unlikely(!se7722_irq_regs)) {
+ printk("Failed to remap IRQ01 regs\n");
+ return;
+ }
+
+ /*
+ * All FPGA IRQs disabled by default
+ */
+ iowrite16(0, se7722_irq_regs + IRQ01_MASK_REG);
+
+ __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
+
+ se7722_domain_init();
+ se7722_gc_init();
+}
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index 8f7f055..e04e2bc 100644
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -2,6 +2,7 @@
* linux/arch/sh/boards/se/7722/setup.c
*
* Copyright (C) 2007 Nobuhiro Iwamatsu
+ * Copyright (C) 2012 Paul Mundt
*
* Hitachi UL SolutionEngine 7722 Support.
*
@@ -15,6 +16,7 @@
#include <linux/ata_platform.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
+#include <linux/irqdomain.h>
#include <linux/smc91x.h>
#include <linux/sh_intc.h>
#include <mach-se/mach/se7722.h>
@@ -143,10 +145,10 @@
/* Wire-up dynamic vectors */
cf_ide_resources[2].start = cf_ide_resources[2].end =
- se7722_fpga_irq[SE7722_FPGA_IRQ_MRSHPC0];
+ irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_MRSHPC0);
smc91x_eth_resources[1].start = smc91x_eth_resources[1].end =
- se7722_fpga_irq[SE7722_FPGA_IRQ_SMC];
+ irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_SMC);
return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices));
}
diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c
index c6342ce..5d1d3ec 100644
--- a/arch/sh/boards/mach-se/7724/irq.c
+++ b/arch/sh/boards/mach-se/7724/irq.c
@@ -17,8 +17,10 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+#include <linux/export.h>
+#include <linux/topology.h>
+#include <linux/io.h>
+#include <linux/err.h>
#include <mach-se/mach/se7724.h>
struct fpga_irq {
@@ -111,7 +113,7 @@
*/
void __init init_se7724_IRQ(void)
{
- int i, nid = cpu_to_node(boot_cpu_data);
+ int irq_base, i;
__raw_writew(0xffff, IRQ0_MR); /* mask all */
__raw_writew(0xffff, IRQ1_MR); /* mask all */
@@ -121,29 +123,17 @@
__raw_writew(0x0000, IRQ2_SR); /* clear irq */
__raw_writew(0x002a, IRQ_MODE); /* set irq type */
- for (i = 0; i < SE7724_FPGA_IRQ_NR; i++) {
- int irq, wanted;
-
- wanted = SE7724_FPGA_IRQ_BASE + i;
-
- irq = create_irq_nr(wanted, nid);
- if (unlikely(irq == 0)) {
- pr_err("%s: failed hooking irq %d for FPGA\n",
- __func__, wanted);
- return;
- }
-
- if (unlikely(irq != wanted)) {
- pr_err("%s: got irq %d but wanted %d, bailing.\n",
- __func__, irq, wanted);
- destroy_irq(irq);
- return;
- }
-
- irq_set_chip_and_handler_name(irq, &se7724_irq_chip,
- handle_level_irq, "level");
+ irq_base = irq_alloc_descs(SE7724_FPGA_IRQ_BASE, SE7724_FPGA_IRQ_BASE,
+ SE7724_FPGA_IRQ_NR, numa_node_id());
+ if (IS_ERR_VALUE(irq_base)) {
+ pr_err("%s: failed hooking irqs for FPGA\n", __func__);
+ return;
}
+ for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
+ irq_set_chip_and_handler_name(irq_base + i, &se7724_irq_chip,
+ handle_level_irq, "level");
+
irq_set_chained_handler(IRQ0_IRQ, se7724_irq_demux);
irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
diff --git a/arch/sh/boards/mach-x3proto/gpio.c b/arch/sh/boards/mach-x3proto/gpio.c
index f33b2b5..3ea65e9 100644
--- a/arch/sh/boards/mach-x3proto/gpio.c
+++ b/arch/sh/boards/mach-x3proto/gpio.c
@@ -3,7 +3,7 @@
*
* Renesas SH-X3 Prototype Baseboard GPIO Support.
*
- * Copyright (C) 2010 Paul Mundt
+ * Copyright (C) 2010 - 2012 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -17,6 +17,7 @@
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
+#include <linux/irqdomain.h>
#include <linux/io.h>
#include <mach/ilsel.h>
#include <mach/hardware.h>
@@ -26,7 +27,7 @@
#define KEYDETR 0xb81c0004
static DEFINE_SPINLOCK(x3proto_gpio_lock);
-static unsigned int x3proto_gpio_irq_map[NR_BASEBOARD_GPIOS] = { 0, };
+static struct irq_domain *x3proto_irq_domain;
static int x3proto_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
{
@@ -49,7 +50,14 @@
static int x3proto_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
{
- return x3proto_gpio_irq_map[gpio];
+ int virq;
+
+ if (gpio < chip->ngpio)
+ virq = irq_create_mapping(x3proto_irq_domain, gpio);
+ else
+ virq = -ENXIO;
+
+ return virq;
}
static void x3proto_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
@@ -62,9 +70,8 @@
chip->irq_mask_ack(data);
mask = __raw_readw(KEYDETR);
-
for_each_set_bit(pin, &mask, NR_BASEBOARD_GPIOS)
- generic_handle_irq(x3proto_gpio_to_irq(NULL, pin));
+ generic_handle_irq(irq_linear_revmap(x3proto_irq_domain, pin));
chip->irq_unmask(data);
}
@@ -78,10 +85,23 @@
.ngpio = NR_BASEBOARD_GPIOS,
};
+static int x3proto_gpio_irq_map(struct irq_domain *domain, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler_name(virq, &dummy_irq_chip, handle_simple_irq,
+ "gpio");
+
+ return 0;
+}
+
+static struct irq_domain_ops x3proto_gpio_irq_ops = {
+ .map = x3proto_gpio_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
int __init x3proto_gpio_setup(void)
{
- int ilsel;
- int ret, i;
+ int ilsel, ret;
ilsel = ilsel_enable(ILSEL_KEY);
if (unlikely(ilsel < 0))
@@ -91,21 +111,10 @@
if (unlikely(ret))
goto err_gpio;
- for (i = 0; i < NR_BASEBOARD_GPIOS; i++) {
- unsigned long flags;
- int irq = create_irq();
-
- if (unlikely(irq < 0)) {
- ret = -EINVAL;
- goto err_irq;
- }
-
- spin_lock_irqsave(&x3proto_gpio_lock, flags);
- x3proto_gpio_irq_map[i] = irq;
- irq_set_chip_and_handler_name(irq, &dummy_irq_chip,
- handle_simple_irq, "gpio");
- spin_unlock_irqrestore(&x3proto_gpio_lock, flags);
- }
+ x3proto_irq_domain = irq_domain_add_linear(NULL, NR_BASEBOARD_GPIOS,
+ &x3proto_gpio_irq_ops, NULL);
+ if (unlikely(!x3proto_irq_domain))
+ goto err_irq;
pr_info("registering '%s' support, handling GPIOs %u -> %u, "
"bound to IRQ %u\n",
@@ -119,10 +128,6 @@
return 0;
err_irq:
- for (; i >= 0; --i)
- if (x3proto_gpio_irq_map[i])
- destroy_irq(x3proto_gpio_irq_map[i]);
-
ret = gpiochip_remove(&x3proto_gpio_chip);
if (unlikely(ret))
pr_err("Failed deregistering GPIO\n");
diff --git a/arch/sh/cchips/hd6446x/hd64461.c b/arch/sh/cchips/hd6446x/hd64461.c
index eb4ea4d..e973561 100644
--- a/arch/sh/cchips/hd6446x/hd64461.c
+++ b/arch/sh/cchips/hd6446x/hd64461.c
@@ -73,10 +73,7 @@
int __init setup_hd64461(void)
{
- int i, nid = cpu_to_node(boot_cpu_data);
-
- if (!MACH_HD64461)
- return 0;
+ int irq_base, i;
printk(KERN_INFO
"HD64461 configured at 0x%x on irq %d(mapped into %d to %d)\n",
@@ -89,28 +86,16 @@
#endif
__raw_writew(0xffff, HD64461_NIMR);
- /* IRQ 80 -> 95 belongs to HD64461 */
- for (i = HD64461_IRQBASE; i < HD64461_IRQBASE + 16; i++) {
- unsigned int irq;
-
- irq = create_irq_nr(i, nid);
- if (unlikely(irq == 0)) {
- pr_err("%s: failed hooking irq %d for HD64461\n",
- __func__, i);
- return -EBUSY;
- }
-
- if (unlikely(irq != i)) {
- pr_err("%s: got irq %d but wanted %d, bailing.\n",
- __func__, irq, i);
- destroy_irq(irq);
- return -EINVAL;
- }
-
- irq_set_chip_and_handler(i, &hd64461_irq_chip,
- handle_level_irq);
+ irq_base = irq_alloc_descs(HD64461_IRQBASE, HD64461_IRQBASE, 16, -1);
+ if (IS_ERR_VALUE(irq_base)) {
+ pr_err("%s: failed hooking irqs for HD64461\n", __func__);
+ return irq_base;
}
+ for (i = 0; i < 16; i++)
+ irq_set_chip_and_handler(irq_base + i, &hd64461_irq_chip,
+ handle_level_irq);
+
irq_set_chained_handler(CONFIG_HD64461_IRQ, hd64461_irq_demux);
irq_set_irq_type(CONFIG_HD64461_IRQ, IRQ_TYPE_LEVEL_LOW);
diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c
index c045142..9e702f2 100644
--- a/arch/sh/drivers/pci/pcie-sh7786.c
+++ b/arch/sh/drivers/pci/pcie-sh7786.c
@@ -239,7 +239,7 @@
clk->enable_reg = (void __iomem *)(chan->reg_base + SH4A_PCIEPHYCTLR);
clk->enable_bit = BITS_CKE;
- ret = sh_clk_mstp32_register(clk, 1);
+ ret = sh_clk_mstp_register(clk, 1);
if (unlikely(ret < 0))
goto err_phy;
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
index 7beb423..7b673dd 100644
--- a/arch/sh/include/asm/Kbuild
+++ b/arch/sh/include/asm/Kbuild
@@ -1,5 +1,39 @@
include include/asm-generic/Kbuild.asm
+generic-y += bitsperlong.h
+generic-y += cputime.h
+generic-y += current.h
+generic-y += delay.h
+generic-y += div64.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += kvm_para.h
+generic-y += local.h
+generic-y += local64.h
+generic-y += param.h
+generic-y += parport.h
+generic-y += percpu.h
+generic-y += poll.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sembuf.h
+generic-y += serial.h
+generic-y += shmbuf.h
+generic-y += siginfo.h
+generic-y += sizes.h
+generic-y += socket.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += ucontext.h
+generic-y += xor.h
+
header-y += cachectl.h
header-y += cpu-features.h
header-y += hw_breakpoint.h
diff --git a/arch/sh/include/asm/bitsperlong.h b/arch/sh/include/asm/bitsperlong.h
deleted file mode 100644
index 6dc0bb0..0000000
--- a/arch/sh/include/asm/bitsperlong.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/bitsperlong.h>
diff --git a/arch/sh/include/asm/bug.h b/arch/sh/include/asm/bug.h
index 2b87d86..dcf2780 100644
--- a/arch/sh/include/asm/bug.h
+++ b/arch/sh/include/asm/bug.h
@@ -110,6 +110,10 @@
#include <asm-generic/bug.h>
struct pt_regs;
+
+/* arch/sh/kernel/traps.c */
extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
+extern void die_if_kernel(const char *str, struct pt_regs *regs, long err);
+extern void die_if_no_fixup(const char *str, struct pt_regs *regs, long err);
#endif /* __ASM_SH_BUG_H */
diff --git a/arch/sh/include/asm/cputime.h b/arch/sh/include/asm/cputime.h
deleted file mode 100644
index 6ca395d..0000000
--- a/arch/sh/include/asm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __SH_CPUTIME_H
-#define __SH_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __SH_CPUTIME_H */
diff --git a/arch/sh/include/asm/current.h b/arch/sh/include/asm/current.h
deleted file mode 100644
index 4c51401..0000000
--- a/arch/sh/include/asm/current.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/current.h>
diff --git a/arch/sh/include/asm/delay.h b/arch/sh/include/asm/delay.h
deleted file mode 100644
index 9670e12..0000000
--- a/arch/sh/include/asm/delay.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/delay.h>
diff --git a/arch/sh/include/asm/div64.h b/arch/sh/include/asm/div64.h
deleted file mode 100644
index 6cd978c..0000000
--- a/arch/sh/include/asm/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/arch/sh/include/asm/emergency-restart.h b/arch/sh/include/asm/emergency-restart.h
deleted file mode 100644
index 108d8c4..0000000
--- a/arch/sh/include/asm/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/sh/include/asm/errno.h b/arch/sh/include/asm/errno.h
deleted file mode 100644
index 51cf6f9..0000000
--- a/arch/sh/include/asm/errno.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_ERRNO_H
-#define __ASM_SH_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* __ASM_SH_ERRNO_H */
diff --git a/arch/sh/include/asm/fcntl.h b/arch/sh/include/asm/fcntl.h
deleted file mode 100644
index 46ab12d..0000000
--- a/arch/sh/include/asm/fcntl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/fcntl.h>
diff --git a/arch/sh/include/asm/io_noioport.h b/arch/sh/include/asm/io_noioport.h
index e136d28..4d48f14 100644
--- a/arch/sh/include/asm/io_noioport.h
+++ b/arch/sh/include/asm/io_noioport.h
@@ -19,9 +19,20 @@
return -1;
}
-#define outb(x, y) BUG()
-#define outw(x, y) BUG()
-#define outl(x, y) BUG()
+static inline void outb(unsigned char x, unsigned long port)
+{
+ BUG();
+}
+
+static inline void outw(unsigned short x, unsigned long port)
+{
+ BUG();
+}
+
+static inline void outl(unsigned int x, unsigned long port)
+{
+ BUG();
+}
#define inb_p(addr) inb(addr)
#define inw_p(addr) inw(addr)
diff --git a/arch/sh/include/asm/ioctl.h b/arch/sh/include/asm/ioctl.h
deleted file mode 100644
index b279fe0..0000000
--- a/arch/sh/include/asm/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/arch/sh/include/asm/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h
deleted file mode 100644
index 84c7e51..0000000
--- a/arch/sh/include/asm/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ipcbuf.h>
diff --git a/arch/sh/include/asm/irq_regs.h b/arch/sh/include/asm/irq_regs.h
deleted file mode 100644
index 3dd9c0b..0000000
--- a/arch/sh/include/asm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h
index a6201f1..8d6a831 100644
--- a/arch/sh/include/asm/kdebug.h
+++ b/arch/sh/include/asm/kdebug.h
@@ -10,6 +10,8 @@
DIE_SSTEP,
};
+/* arch/sh/kernel/dumpstack.c */
extern void printk_address(unsigned long address, int reliable);
+extern void dump_mem(const char *str, unsigned long bottom, unsigned long top);
#endif /* __ASM_SH_KDEBUG_H */
diff --git a/arch/sh/include/asm/kvm_para.h b/arch/sh/include/asm/kvm_para.h
deleted file mode 100644
index 14fab8f..0000000
--- a/arch/sh/include/asm/kvm_para.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kvm_para.h>
diff --git a/arch/sh/include/asm/local.h b/arch/sh/include/asm/local.h
deleted file mode 100644
index 9ed9b9c..0000000
--- a/arch/sh/include/asm/local.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_SH_LOCAL_H
-#define __ASM_SH_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __ASM_SH_LOCAL_H */
-
diff --git a/arch/sh/include/asm/local64.h b/arch/sh/include/asm/local64.h
deleted file mode 100644
index 36c93b5..0000000
--- a/arch/sh/include/asm/local64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local64.h>
diff --git a/arch/sh/include/asm/mman.h b/arch/sh/include/asm/mman.h
deleted file mode 100644
index 8eebf89f5..0000000
--- a/arch/sh/include/asm/mman.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/mman.h>
diff --git a/arch/sh/include/asm/msgbuf.h b/arch/sh/include/asm/msgbuf.h
deleted file mode 100644
index 809134c..0000000
--- a/arch/sh/include/asm/msgbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/msgbuf.h>
diff --git a/arch/sh/include/asm/param.h b/arch/sh/include/asm/param.h
deleted file mode 100644
index 965d454..0000000
--- a/arch/sh/include/asm/param.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/param.h>
diff --git a/arch/sh/include/asm/parport.h b/arch/sh/include/asm/parport.h
deleted file mode 100644
index cf252af..0000000
--- a/arch/sh/include/asm/parport.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/parport.h>
diff --git a/arch/sh/include/asm/percpu.h b/arch/sh/include/asm/percpu.h
deleted file mode 100644
index 4db4b39..0000000
--- a/arch/sh/include/asm/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ARCH_SH_PERCPU
-#define __ARCH_SH_PERCPU
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_SH_PERCPU */
diff --git a/arch/sh/include/asm/poll.h b/arch/sh/include/asm/poll.h
deleted file mode 100644
index c98509d..0000000
--- a/arch/sh/include/asm/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/poll.h>
diff --git a/arch/sh/include/asm/resource.h b/arch/sh/include/asm/resource.h
deleted file mode 100644
index 9c2499a..0000000
--- a/arch/sh/include/asm/resource.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_RESOURCE_H
-#define __ASM_SH_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* __ASM_SH_RESOURCE_H */
diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h
deleted file mode 100644
index 98dfc35..0000000
--- a/arch/sh/include/asm/scatterlist.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_SCATTERLIST_H
-#define __ASM_SH_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* __ASM_SH_SCATTERLIST_H */
diff --git a/arch/sh/include/asm/sembuf.h b/arch/sh/include/asm/sembuf.h
deleted file mode 100644
index 7673b83..0000000
--- a/arch/sh/include/asm/sembuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/sembuf.h>
diff --git a/arch/sh/include/asm/serial.h b/arch/sh/include/asm/serial.h
deleted file mode 100644
index a0cb0caf..0000000
--- a/arch/sh/include/asm/serial.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/serial.h>
diff --git a/arch/sh/include/asm/shmbuf.h b/arch/sh/include/asm/shmbuf.h
deleted file mode 100644
index 83c05fc..0000000
--- a/arch/sh/include/asm/shmbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/shmbuf.h>
diff --git a/arch/sh/include/asm/siginfo.h b/arch/sh/include/asm/siginfo.h
deleted file mode 100644
index 813040e..0000000
--- a/arch/sh/include/asm/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_SIGINFO_H
-#define __ASM_SH_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif /* __ASM_SH_SIGINFO_H */
diff --git a/arch/sh/include/asm/sizes.h b/arch/sh/include/asm/sizes.h
deleted file mode 100644
index dd248c2..0000000
--- a/arch/sh/include/asm/sizes.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/sizes.h>
diff --git a/arch/sh/include/asm/socket.h b/arch/sh/include/asm/socket.h
deleted file mode 100644
index 6b71384..0000000
--- a/arch/sh/include/asm/socket.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/socket.h>
diff --git a/arch/sh/include/asm/statfs.h b/arch/sh/include/asm/statfs.h
deleted file mode 100644
index 9202a02..0000000
--- a/arch/sh/include/asm/statfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_STATFS_H
-#define __ASM_SH_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* __ASM_SH_STATFS_H */
diff --git a/arch/sh/include/asm/termbits.h b/arch/sh/include/asm/termbits.h
deleted file mode 100644
index 3935b10..0000000
--- a/arch/sh/include/asm/termbits.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/termbits.h>
diff --git a/arch/sh/include/asm/termios.h b/arch/sh/include/asm/termios.h
deleted file mode 100644
index 280d78a..0000000
--- a/arch/sh/include/asm/termios.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/termios.h>
diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h
index 050f221..8698a80 100644
--- a/arch/sh/include/asm/uaccess.h
+++ b/arch/sh/include/asm/uaccess.h
@@ -25,6 +25,8 @@
(__chk_user_ptr(addr), \
__access_ok((unsigned long __force)(addr), (size)))
+#define user_addr_max() (current_thread_info()->addr_limit.seg)
+
/*
* Uh, these should become the main single-value transfer routines ...
* They automatically use the right size if we just have the right
@@ -100,6 +102,11 @@
# include "uaccess_64.h"
#endif
+extern long strncpy_from_user(char *dest, const char __user *src, long count);
+
+extern __must_check long strlen_user(const char __user *str);
+extern __must_check long strnlen_user(const char __user *str, long n);
+
/* Generic arbitrary sized copy. */
/* Return the number of bytes NOT copied */
__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
@@ -137,37 +144,6 @@
__cl_size; \
})
-/**
- * strncpy_from_user: - Copy a NUL terminated string from userspace.
- * @dst: Destination address, in kernel space. This buffer must be at
- * least @count bytes long.
- * @src: Source address, in user space.
- * @count: Maximum number of bytes to copy, including the trailing NUL.
- *
- * Copies a NUL-terminated string from userspace to kernel space.
- *
- * On success, returns the length of the string (not including the trailing
- * NUL).
- *
- * If access to userspace fails, returns -EFAULT (some data may have been
- * copied).
- *
- * If @count is smaller than the length of the string, copies @count bytes
- * and returns @count.
- */
-#define strncpy_from_user(dest,src,count) \
-({ \
- unsigned long __sfu_src = (unsigned long)(src); \
- int __sfu_count = (int)(count); \
- long __sfu_res = -EFAULT; \
- \
- if (__access_ok(__sfu_src, __sfu_count)) \
- __sfu_res = __strncpy_from_user((unsigned long)(dest), \
- __sfu_src, __sfu_count); \
- \
- __sfu_res; \
-})
-
static inline unsigned long
copy_from_user(void *to, const void __user *from, unsigned long n)
{
@@ -192,43 +168,6 @@
return __copy_size;
}
-/**
- * strnlen_user: - Get the size of a string in user space.
- * @s: The string to measure.
- * @n: The maximum valid length
- *
- * Context: User context only. This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- * If the string is too long, returns a value greater than @n.
- */
-static inline long strnlen_user(const char __user *s, long n)
-{
- if (!__addr_ok(s))
- return 0;
- else
- return __strnlen_user(s, n);
-}
-
-/**
- * strlen_user: - Get the size of a string in user space.
- * @str: The string to measure.
- *
- * Context: User context only. This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- *
- * If there is a limit on the length of a valid string, you may wish to
- * consider using strnlen_user() instead.
- */
-#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
-
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
diff --git a/arch/sh/include/asm/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h
index ae0d24f..c0de7ee 100644
--- a/arch/sh/include/asm/uaccess_32.h
+++ b/arch/sh/include/asm/uaccess_32.h
@@ -170,79 +170,4 @@
extern void __put_user_unknown(void);
-static inline int
-__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
-{
- __kernel_size_t res;
- unsigned long __dummy, _d, _s, _c;
-
- __asm__ __volatile__(
- "9:\n"
- "mov.b @%2+, %1\n\t"
- "cmp/eq #0, %1\n\t"
- "bt/s 2f\n"
- "1:\n"
- "mov.b %1, @%3\n\t"
- "dt %4\n\t"
- "bf/s 9b\n\t"
- " add #1, %3\n\t"
- "2:\n\t"
- "sub %4, %0\n"
- "3:\n"
- ".section .fixup,\"ax\"\n"
- "4:\n\t"
- "mov.l 5f, %1\n\t"
- "jmp @%1\n\t"
- " mov %9, %0\n\t"
- ".balign 4\n"
- "5: .long 3b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .balign 4\n"
- " .long 9b,4b\n"
- ".previous"
- : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c)
- : "0" (__count), "2" (__src), "3" (__dest), "4" (__count),
- "i" (-EFAULT)
- : "memory", "t");
-
- return res;
-}
-
-/*
- * Return the size of a string (including the ending 0 even when we have
- * exceeded the maximum string length).
- */
-static inline long __strnlen_user(const char __user *__s, long __n)
-{
- unsigned long res;
- unsigned long __dummy;
-
- __asm__ __volatile__(
- "1:\t"
- "mov.b @(%0,%3), %1\n\t"
- "cmp/eq %4, %0\n\t"
- "bt/s 2f\n\t"
- " add #1, %0\n\t"
- "tst %1, %1\n\t"
- "bf 1b\n\t"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3:\n\t"
- "mov.l 4f, %1\n\t"
- "jmp @%1\n\t"
- " mov #0, %0\n"
- ".balign 4\n"
- "4: .long 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .balign 4\n"
- " .long 1b,3b\n"
- ".previous"
- : "=z" (res), "=&r" (__dummy)
- : "0" (0), "r" (__s), "r" (__n)
- : "t");
- return res;
-}
-
#endif /* __ASM_SH_UACCESS_32_H */
diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h
index 56fd20b..2e07e0f 100644
--- a/arch/sh/include/asm/uaccess_64.h
+++ b/arch/sh/include/asm/uaccess_64.h
@@ -84,8 +84,4 @@
extern long __put_user_asm_q(void *, long);
extern void __put_user_unknown(void);
-extern long __strnlen_user(const char *__s, long __n);
-extern int __strncpy_from_user(unsigned long __dest,
- unsigned long __user __src, int __count);
-
#endif /* __ASM_SH_UACCESS_64_H */
diff --git a/arch/sh/include/asm/ucontext.h b/arch/sh/include/asm/ucontext.h
deleted file mode 100644
index 9bc07b9..0000000
--- a/arch/sh/include/asm/ucontext.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ucontext.h>
diff --git a/arch/sh/include/asm/word-at-a-time.h b/arch/sh/include/asm/word-at-a-time.h
new file mode 100644
index 0000000..6e38953
--- /dev/null
+++ b/arch/sh/include/asm/word-at-a-time.h
@@ -0,0 +1,53 @@
+#ifndef __ASM_SH_WORD_AT_A_TIME_H
+#define __ASM_SH_WORD_AT_A_TIME_H
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+# include <asm-generic/word-at-a-time.h>
+#else
+/*
+ * Little-endian version cribbed from x86.
+ */
+struct word_at_a_time {
+ const unsigned long one_bits, high_bits;
+};
+
+#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) }
+
+/* Carl Chatfield / Jan Achrenius G+ version for 32-bit */
+static inline long count_masked_bytes(long mask)
+{
+ /* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */
+ long a = (0x0ff0001+mask) >> 23;
+ /* Fix the 1 for 00 case */
+ return a & mask;
+}
+
+/* Return nonzero if it has a zero */
+static inline unsigned long has_zero(unsigned long a, unsigned long *bits, const struct word_at_a_time *c)
+{
+ unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits;
+ *bits = mask;
+ return mask;
+}
+
+static inline unsigned long prep_zero_mask(unsigned long a, unsigned long bits, const struct word_at_a_time *c)
+{
+ return bits;
+}
+
+static inline unsigned long create_zero_mask(unsigned long bits)
+{
+ bits = (bits - 1) & ~bits;
+ return bits >> 7;
+}
+
+/* The mask we created is directly usable as a bytemask */
+#define zero_bytemask(mask) (mask)
+
+static inline unsigned long find_zero(unsigned long mask)
+{
+ return count_masked_bytes(mask);
+}
+#endif
+
+#endif
diff --git a/arch/sh/include/asm/xor.h b/arch/sh/include/asm/xor.h
deleted file mode 100644
index c82eb12..0000000
--- a/arch/sh/include/asm/xor.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/xor.h>
diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h
deleted file mode 100644
index 1192e1c..0000000
--- a/arch/sh/include/cpu-sh2a/cpu/ubc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * SH-2A UBC definitions
- *
- * Copyright (C) 2008 Kieran Bingham
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __ASM_CPU_SH2A_UBC_H
-#define __ASM_CPU_SH2A_UBC_H
-
-#define UBC_BARA 0xfffc0400
-#define UBC_BAMRA 0xfffc0404
-#define UBC_BBRA 0xfffc04a0 /* 16 bit access */
-#define UBC_BDRA 0xfffc0408
-#define UBC_BDMRA 0xfffc040c
-
-#define UBC_BARB 0xfffc0410
-#define UBC_BAMRB 0xfffc0414
-#define UBC_BBRB 0xfffc04b0 /* 16 bit access */
-#define UBC_BDRB 0xfffc0418
-#define UBC_BDMRB 0xfffc041c
-
-#define UBC_BRCR 0xfffc04c0
-
-#endif /* __ASM_CPU_SH2A_UBC_H */
diff --git a/arch/sh/include/mach-se/mach/se7343.h b/arch/sh/include/mach-se/mach/se7343.h
index 50b5d57..542521c 100644
--- a/arch/sh/include/mach-se/mach/se7343.h
+++ b/arch/sh/include/mach-se/mach/se7343.h
@@ -50,9 +50,6 @@
#define PA_LED 0xb0C00000 /* LED */
#define LED_SHIFT 0
#define PA_DIPSW 0xb0900000 /* Dip switch 31 */
-#define PA_CPLD_MODESET 0xb1400004 /* CPLD Mode set register */
-#define PA_CPLD_ST 0xb1400008 /* CPLD Interrupt status register */
-#define PA_CPLD_IMSK 0xb140000a /* CPLD Interrupt mask register */
/* Area 5 */
#define PA_EXT5 0x14000000
#define PA_EXT5_SIZE 0x04000000
@@ -135,8 +132,10 @@
#define SE7343_FPGA_IRQ_NR 12
+struct irq_domain;
+
/* arch/sh/boards/se/7343/irq.c */
-extern unsigned int se7343_fpga_irq[];
+extern struct irq_domain *se7343_irq_domain;
void init_7343se_IRQ(void);
diff --git a/arch/sh/include/mach-se/mach/se7722.h b/arch/sh/include/mach-se/mach/se7722.h
index 201081e..637e7ac 100644
--- a/arch/sh/include/mach-se/mach/se7722.h
+++ b/arch/sh/include/mach-se/mach/se7722.h
@@ -81,12 +81,6 @@
#define IRQ0_IRQ evt2irq(0x600)
#define IRQ1_IRQ evt2irq(0x620)
-#define IRQ01_MODE 0xb1800000
-#define IRQ01_STS 0xb1800004
-#define IRQ01_MASK 0xb1800008
-
-/* Bits in IRQ01_* registers */
-
#define SE7722_FPGA_IRQ_USB 0 /* IRQ0 */
#define SE7722_FPGA_IRQ_SMC 1 /* IRQ0 */
#define SE7722_FPGA_IRQ_MRSHPC0 2 /* IRQ1 */
@@ -95,8 +89,10 @@
#define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */
#define SE7722_FPGA_IRQ_NR 6
+struct irq_domain;
+
/* arch/sh/boards/se/7722/irq.c */
-extern unsigned int se7722_fpga_irq[];
+extern struct irq_domain *se7722_irq_domain;
void init_se7722_IRQ(void);
diff --git a/arch/sh/kernel/cpu/sh3/serial-sh7720.c b/arch/sh/kernel/cpu/sh3/serial-sh7720.c
index 8832c52..c4a0336 100644
--- a/arch/sh/kernel/cpu/sh3/serial-sh7720.c
+++ b/arch/sh/kernel/cpu/sh3/serial-sh7720.c
@@ -2,7 +2,7 @@
#include <linux/serial_core.h>
#include <linux/io.h>
#include <cpu/serial.h>
-#include <asm/gpio.h>
+#include <cpu/gpio.h>
static void sh7720_sci_init_pins(struct uart_port *port, unsigned int cflag)
{
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
index ea01a72..53638e2 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
@@ -283,7 +283,7 @@
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
index 7ac07b4..22e485d 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
@@ -276,7 +276,7 @@
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 8e1f970..c4cb740 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -261,7 +261,7 @@
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR);
+ ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
return ret;
}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
index 35f75cf..37c41c7 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
@@ -311,7 +311,7 @@
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR);
+ ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
return ret;
}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index 2a87901..c87e78f 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -375,7 +375,7 @@
ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR);
+ ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
return ret;
}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c b/arch/sh/kernel/cpu/sh4a/clock-sh7734.c
index 1697642..deb683a 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7734.c
@@ -260,7 +260,7 @@
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
index 04ab5ae..e84a432 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
@@ -148,7 +148,7 @@
ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
index ab1c58f..1c83788 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
@@ -175,7 +175,7 @@
ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
index 4917094..8bba6f1 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
@@ -194,7 +194,7 @@
ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
index 0f11b39..a9422da 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
@@ -149,7 +149,7 @@
ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index ff1f0e6..b7cf6a5 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -1569,86 +1569,6 @@
#endif /* CONFIG_MMU */
/*
- * int __strncpy_from_user(unsigned long __dest, unsigned long __src,
- * int __count)
- *
- * Inputs:
- * (r2) target address
- * (r3) source address
- * (r4) maximum size in bytes
- *
- * Ouputs:
- * (*r2) copied data
- * (r2) -EFAULT (in case of faulting)
- * copied data (otherwise)
- */
- .global __strncpy_from_user
-__strncpy_from_user:
- pta ___strncpy_from_user1, tr0
- pta ___strncpy_from_user_done, tr1
- or r4, ZERO, r5 /* r5 = original count */
- beq/u r4, r63, tr1 /* early exit if r4==0 */
- movi -(EFAULT), r6 /* r6 = reply, no real fixup */
- or ZERO, ZERO, r7 /* r7 = data, clear top byte of data */
-
-___strncpy_from_user1:
- ld.b r3, 0, r7 /* Fault address: only in reading */
- st.b r2, 0, r7
- addi r2, 1, r2
- addi r3, 1, r3
- beq/u ZERO, r7, tr1
- addi r4, -1, r4 /* return real number of copied bytes */
- bne/l ZERO, r4, tr0
-
-___strncpy_from_user_done:
- sub r5, r4, r6 /* If done, return copied */
-
-___strncpy_from_user_exit:
- or r6, ZERO, r2
- ptabs LINK, tr0
- blink tr0, ZERO
-
-/*
- * extern long __strnlen_user(const char *__s, long __n)
- *
- * Inputs:
- * (r2) source address
- * (r3) source size in bytes
- *
- * Ouputs:
- * (r2) -EFAULT (in case of faulting)
- * string length (otherwise)
- */
- .global __strnlen_user
-__strnlen_user:
- pta ___strnlen_user_set_reply, tr0
- pta ___strnlen_user1, tr1
- or ZERO, ZERO, r5 /* r5 = counter */
- movi -(EFAULT), r6 /* r6 = reply, no real fixup */
- or ZERO, ZERO, r7 /* r7 = data, clear top byte of data */
- beq r3, ZERO, tr0
-
-___strnlen_user1:
- ldx.b r2, r5, r7 /* Fault address: only in reading */
- addi r3, -1, r3 /* No real fixup */
- addi r5, 1, r5
- beq r3, ZERO, tr0
- bne r7, ZERO, tr1
-! The line below used to be active. This meant led to a junk byte lying between each pair
-! of entries in the argv & envp structures in memory. Whilst the program saw the right data
-! via the argv and envp arguments to main, it meant the 'flat' representation visible through
-! /proc/$pid/cmdline was corrupt, causing trouble with ps, for example.
-! addi r5, 1, r5 /* Include '\0' */
-
-___strnlen_user_set_reply:
- or r5, ZERO, r6 /* If done, return counter */
-
-___strnlen_user_exit:
- or r6, ZERO, r2
- ptabs LINK, tr0
- blink tr0, ZERO
-
-/*
* extern long __get_user_asm_?(void *val, long addr)
*
* Inputs:
@@ -1982,8 +1902,6 @@
.long ___copy_user2, ___copy_user_exit
.long ___clear_user1, ___clear_user_exit
#endif
- .long ___strncpy_from_user1, ___strncpy_from_user_exit
- .long ___strnlen_user1, ___strnlen_user_exit
.long ___get_user_asm_b1, ___get_user_asm_b_exit
.long ___get_user_asm_w1, ___get_user_asm_w_exit
.long ___get_user_asm_l1, ___get_user_asm_l_exit
diff --git a/arch/sh/kernel/cpu/sh5/unwind.c b/arch/sh/kernel/cpu/sh5/unwind.c
index b205b25..10aed41 100644
--- a/arch/sh/kernel/cpu/sh5/unwind.c
+++ b/arch/sh/kernel/cpu/sh5/unwind.c
@@ -16,6 +16,8 @@
#include <asm/ptrace.h>
#include <asm/processor.h>
#include <asm/io.h>
+#include <asm/unwinder.h>
+#include <asm/stacktrace.h>
static u8 regcache[63];
@@ -199,8 +201,11 @@
return 0;
}
-/* Don't put this on the stack since we'll want to call sh64_unwind
- * when we're close to underflowing the stack anyway. */
+/*
+ * Don't put this on the stack since we'll want to call in to
+ * sh64_unwinder_dump() when we're close to underflowing the stack
+ * anyway.
+ */
static struct pt_regs here_regs;
extern const char syscall_ret;
@@ -208,17 +213,19 @@
extern const char ret_from_exception;
extern const char ret_from_irq;
-static void sh64_unwind_inner(struct pt_regs *regs);
+static void sh64_unwind_inner(const struct stacktrace_ops *ops,
+ void *data, struct pt_regs *regs);
-static void unwind_nested (unsigned long pc, unsigned long fp)
+static inline void unwind_nested(const struct stacktrace_ops *ops, void *data,
+ unsigned long pc, unsigned long fp)
{
if ((fp >= __MEMORY_START) &&
- ((fp & 7) == 0)) {
- sh64_unwind_inner((struct pt_regs *) fp);
- }
+ ((fp & 7) == 0))
+ sh64_unwind_inner(ops, data, (struct pt_regs *)fp);
}
-static void sh64_unwind_inner(struct pt_regs *regs)
+static void sh64_unwind_inner(const struct stacktrace_ops *ops,
+ void *data, struct pt_regs *regs)
{
unsigned long pc, fp;
int ofs = 0;
@@ -232,29 +239,29 @@
int cond;
unsigned long next_fp, next_pc;
- if (pc == ((unsigned long) &syscall_ret & ~1)) {
+ if (pc == ((unsigned long)&syscall_ret & ~1)) {
printk("SYSCALL\n");
- unwind_nested(pc,fp);
+ unwind_nested(ops, data, pc, fp);
return;
}
- if (pc == ((unsigned long) &ret_from_syscall & ~1)) {
+ if (pc == ((unsigned long)&ret_from_syscall & ~1)) {
printk("SYSCALL (PREEMPTED)\n");
- unwind_nested(pc,fp);
+ unwind_nested(ops, data, pc, fp);
return;
}
/* In this case, the PC is discovered by lookup_prev_stack_frame but
it has 4 taken off it to look like the 'caller' */
- if (pc == ((unsigned long) &ret_from_exception & ~1)) {
+ if (pc == ((unsigned long)&ret_from_exception & ~1)) {
printk("EXCEPTION\n");
- unwind_nested(pc,fp);
+ unwind_nested(ops, data, pc, fp);
return;
}
- if (pc == ((unsigned long) &ret_from_irq & ~1)) {
+ if (pc == ((unsigned long)&ret_from_irq & ~1)) {
printk("IRQ\n");
- unwind_nested(pc,fp);
+ unwind_nested(ops, data, pc, fp);
return;
}
@@ -263,8 +270,7 @@
pc -= ofs;
- printk("[<%08lx>] ", pc);
- print_symbol("%s\n", pc);
+ ops->address(data, pc, 1);
if (first_pass) {
/* If the innermost frame is a leaf function, it's
@@ -287,10 +293,13 @@
}
printk("\n");
-
}
-void sh64_unwind(struct pt_regs *regs)
+static void sh64_unwinder_dump(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned long *sp,
+ const struct stacktrace_ops *ops,
+ void *data)
{
if (!regs) {
/*
@@ -320,7 +329,17 @@
);
}
- printk("\nCall Trace:\n");
- sh64_unwind_inner(regs);
+ sh64_unwind_inner(ops, data, regs);
}
+static struct unwinder sh64_unwinder = {
+ .name = "sh64-unwinder",
+ .dump = sh64_unwinder_dump,
+ .rating = 150,
+};
+
+static int __init sh64_unwinder_init(void)
+{
+ return unwinder_register(&sh64_unwinder);
+}
+early_initcall(sh64_unwinder_init);
diff --git a/arch/sh/kernel/dumpstack.c b/arch/sh/kernel/dumpstack.c
index 694158b..7617dc4 100644
--- a/arch/sh/kernel/dumpstack.c
+++ b/arch/sh/kernel/dumpstack.c
@@ -2,13 +2,48 @@
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
* Copyright (C) 2009 Matt Fleming
+ * Copyright (C) 2002 - 2012 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
#include <linux/kallsyms.h>
#include <linux/ftrace.h>
#include <linux/debug_locks.h>
+#include <linux/kdebug.h>
+#include <linux/export.h>
+#include <linux/uaccess.h>
#include <asm/unwinder.h>
#include <asm/stacktrace.h>
+void dump_mem(const char *str, unsigned long bottom, unsigned long top)
+{
+ unsigned long p;
+ int i;
+
+ printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
+
+ for (p = bottom & ~31; p < top; ) {
+ printk("%04lx: ", p & 0xffff);
+
+ for (i = 0; i < 8; i++, p += 4) {
+ unsigned int val;
+
+ if (p < bottom || p >= top)
+ printk(" ");
+ else {
+ if (__get_user(val, (unsigned int __user *)p)) {
+ printk("\n");
+ return;
+ }
+ printk("%08x ", val);
+ }
+ }
+ printk("\n");
+ }
+}
+
void printk_address(unsigned long address, int reliable)
{
printk(" [<%p>] %s%pS\n", (void *) address,
@@ -106,3 +141,26 @@
debug_show_held_locks(tsk);
}
+
+void show_stack(struct task_struct *tsk, unsigned long *sp)
+{
+ unsigned long stack;
+
+ if (!tsk)
+ tsk = current;
+ if (tsk == current)
+ sp = (unsigned long *)current_stack_pointer;
+ else
+ sp = (unsigned long *)tsk->thread.sp;
+
+ stack = (unsigned long)sp;
+ dump_mem("Stack: ", stack, THREAD_SIZE +
+ (unsigned long)task_stack_page(tsk));
+ show_trace(tsk, sp, NULL);
+}
+
+void dump_stack(void)
+{
+ show_stack(NULL, NULL);
+}
+EXPORT_SYMBOL(dump_stack);
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index dadce73..063af10 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -231,16 +231,6 @@
irq_ctx_init(smp_processor_id());
}
-#ifdef CONFIG_SPARSE_IRQ
-int __init arch_probe_nr_irqs(void)
-{
- /*
- * No pre-allocated IRQs.
- */
- return 0;
-}
-#endif
-
#ifdef CONFIG_HOTPLUG_CPU
static void route_irq(struct irq_data *data, unsigned int irq, unsigned int cpu)
{
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index 9b7a459..055d91b 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -4,6 +4,7 @@
#include <linux/sched.h>
#include <linux/export.h>
#include <linux/stackprotector.h>
+#include <asm/fpu.h>
struct kmem_cache *task_xstate_cachep = NULL;
unsigned int xstate_size;
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 4264583e..602545b 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -33,6 +33,7 @@
#include <asm/switch_to.h>
struct task_struct *last_task_used_math = NULL;
+struct pt_regs fake_swapper_regs = { 0, };
void show_regs(struct pt_regs *regs)
{
diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c
index 45afa5c..26a0774 100644
--- a/arch/sh/kernel/sh_ksyms_64.c
+++ b/arch/sh/kernel/sh_ksyms_64.c
@@ -32,8 +32,6 @@
EXPORT_SYMBOL(__get_user_asm_w);
EXPORT_SYMBOL(__get_user_asm_l);
EXPORT_SYMBOL(__get_user_asm_q);
-EXPORT_SYMBOL(__strnlen_user);
-EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(__copy_user);
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index a87e58a..72246bc 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -6,9 +6,80 @@
#include <linux/sched.h>
#include <linux/uaccess.h>
#include <linux/hardirq.h>
+#include <linux/kernel.h>
+#include <linux/kexec.h>
+#include <linux/module.h>
#include <asm/unwinder.h>
#include <asm/traps.h>
+static DEFINE_SPINLOCK(die_lock);
+
+void die(const char *str, struct pt_regs *regs, long err)
+{
+ static int die_counter;
+
+ oops_enter();
+
+ spin_lock_irq(&die_lock);
+ console_verbose();
+ bust_spinlocks(1);
+
+ printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
+ print_modules();
+ show_regs(regs);
+
+ printk("Process: %s (pid: %d, stack limit = %p)\n", current->comm,
+ task_pid_nr(current), task_stack_page(current) + 1);
+
+ if (!user_mode(regs) || in_interrupt())
+ dump_mem("Stack: ", regs->regs[15], THREAD_SIZE +
+ (unsigned long)task_stack_page(current));
+
+ notify_die(DIE_OOPS, str, regs, err, 255, SIGSEGV);
+
+ bust_spinlocks(0);
+ add_taint(TAINT_DIE);
+ spin_unlock_irq(&die_lock);
+ oops_exit();
+
+ if (kexec_should_crash(current))
+ crash_kexec(regs);
+
+ if (in_interrupt())
+ panic("Fatal exception in interrupt");
+
+ if (panic_on_oops)
+ panic("Fatal exception");
+
+ do_exit(SIGSEGV);
+}
+
+void die_if_kernel(const char *str, struct pt_regs *regs, long err)
+{
+ if (!user_mode(regs))
+ die(str, regs, err);
+}
+
+/*
+ * try and fix up kernelspace address errors
+ * - userspace errors just cause EFAULT to be returned, resulting in SEGV
+ * - kernel/userspace interfaces cause a jump to an appropriate handler
+ * - other kernel errors are bad
+ */
+void die_if_no_fixup(const char *str, struct pt_regs *regs, long err)
+{
+ if (!user_mode(regs)) {
+ const struct exception_table_entry *fixup;
+ fixup = search_exception_tables(regs->pc);
+ if (fixup) {
+ regs->pc = fixup->fixup;
+ return;
+ }
+
+ die(str, regs, err);
+ }
+}
+
#ifdef CONFIG_GENERIC_BUG
static void handle_BUG(struct pt_regs *regs)
{
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index a37175d..5f513a6 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -16,13 +16,11 @@
#include <linux/hardirq.h>
#include <linux/init.h>
#include <linux/spinlock.h>
-#include <linux/module.h>
#include <linux/kallsyms.h>
#include <linux/io.h>
#include <linux/bug.h>
#include <linux/debug_locks.h>
#include <linux/kdebug.h>
-#include <linux/kexec.h>
#include <linux/limits.h>
#include <linux/sysfs.h>
#include <linux/uaccess.h>
@@ -48,102 +46,6 @@
#define TRAP_ILLEGAL_SLOT_INST 13
#endif
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
-{
- unsigned long p;
- int i;
-
- printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
-
- for (p = bottom & ~31; p < top; ) {
- printk("%04lx: ", p & 0xffff);
-
- for (i = 0; i < 8; i++, p += 4) {
- unsigned int val;
-
- if (p < bottom || p >= top)
- printk(" ");
- else {
- if (__get_user(val, (unsigned int __user *)p)) {
- printk("\n");
- return;
- }
- printk("%08x ", val);
- }
- }
- printk("\n");
- }
-}
-
-static DEFINE_SPINLOCK(die_lock);
-
-void die(const char * str, struct pt_regs * regs, long err)
-{
- static int die_counter;
-
- oops_enter();
-
- spin_lock_irq(&die_lock);
- console_verbose();
- bust_spinlocks(1);
-
- printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
- print_modules();
- show_regs(regs);
-
- printk("Process: %s (pid: %d, stack limit = %p)\n", current->comm,
- task_pid_nr(current), task_stack_page(current) + 1);
-
- if (!user_mode(regs) || in_interrupt())
- dump_mem("Stack: ", regs->regs[15], THREAD_SIZE +
- (unsigned long)task_stack_page(current));
-
- notify_die(DIE_OOPS, str, regs, err, 255, SIGSEGV);
-
- bust_spinlocks(0);
- add_taint(TAINT_DIE);
- spin_unlock_irq(&die_lock);
- oops_exit();
-
- if (kexec_should_crash(current))
- crash_kexec(regs);
-
- if (in_interrupt())
- panic("Fatal exception in interrupt");
-
- if (panic_on_oops)
- panic("Fatal exception");
-
- do_exit(SIGSEGV);
-}
-
-static inline void die_if_kernel(const char *str, struct pt_regs *regs,
- long err)
-{
- if (!user_mode(regs))
- die(str, regs, err);
-}
-
-/*
- * try and fix up kernelspace address errors
- * - userspace errors just cause EFAULT to be returned, resulting in SEGV
- * - kernel/userspace interfaces cause a jump to an appropriate handler
- * - other kernel errors are bad
- */
-static void die_if_no_fixup(const char * str, struct pt_regs * regs, long err)
-{
- if (!user_mode(regs)) {
- const struct exception_table_entry *fixup;
- fixup = search_exception_tables(regs->pc);
- if (fixup) {
- regs->pc = fixup->fixup;
- return;
- }
-
- die(str, regs, err);
- }
-}
-
static inline void sign_extend(unsigned int count, unsigned char *dst)
{
#ifdef __LITTLE_ENDIAN__
@@ -900,26 +802,3 @@
set_exception_table_vec(TRAP_UBC, breakpoint_trap_handler);
#endif
}
-
-void show_stack(struct task_struct *tsk, unsigned long *sp)
-{
- unsigned long stack;
-
- if (!tsk)
- tsk = current;
- if (tsk == current)
- sp = (unsigned long *)current_stack_pointer;
- else
- sp = (unsigned long *)tsk->thread.sp;
-
- stack = (unsigned long)sp;
- dump_mem("Stack: ", stack, THREAD_SIZE +
- (unsigned long)task_stack_page(tsk));
- show_trace(tsk, sp, NULL);
-}
-
-void dump_stack(void)
-{
- show_stack(NULL, NULL);
-}
-EXPORT_SYMBOL(dump_stack);
diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c
index 8dae93e..f87d20d 100644
--- a/arch/sh/kernel/traps_64.c
+++ b/arch/sh/kernel/traps_64.c
@@ -27,283 +27,25 @@
#include <linux/perf_event.h>
#include <asm/uaccess.h>
#include <asm/io.h>
-#include <linux/atomic.h>
+#include <asm/alignment.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/fpu.h>
-#undef DEBUG_EXCEPTION
-#ifdef DEBUG_EXCEPTION
-/* implemented in ../lib/dbg.c */
-extern void show_excp_regs(char *fname, int trapnr, int signr,
- struct pt_regs *regs);
-#else
-#define show_excp_regs(a, b, c, d)
-#endif
-
-static void do_unhandled_exception(int trapnr, int signr, char *str, char *fn_name,
- unsigned long error_code, struct pt_regs *regs, struct task_struct *tsk);
-
-#define DO_ERROR(trapnr, signr, str, name, tsk) \
-asmlinkage void do_##name(unsigned long error_code, struct pt_regs *regs) \
-{ \
- do_unhandled_exception(trapnr, signr, str, __stringify(name), error_code, regs, current); \
-}
-
-static DEFINE_SPINLOCK(die_lock);
-
-void die(const char * str, struct pt_regs * regs, long err)
-{
- console_verbose();
- spin_lock_irq(&die_lock);
- printk("%s: %lx\n", str, (err & 0xffffff));
- show_regs(regs);
- spin_unlock_irq(&die_lock);
- do_exit(SIGSEGV);
-}
-
-static inline void die_if_kernel(const char * str, struct pt_regs * regs, long err)
-{
- if (!user_mode(regs))
- die(str, regs, err);
-}
-
-static void die_if_no_fixup(const char * str, struct pt_regs * regs, long err)
-{
- if (!user_mode(regs)) {
- const struct exception_table_entry *fixup;
- fixup = search_exception_tables(regs->pc);
- if (fixup) {
- regs->pc = fixup->fixup;
- return;
- }
- die(str, regs, err);
- }
-}
-
-DO_ERROR(13, SIGILL, "illegal slot instruction", illegal_slot_inst, current)
-DO_ERROR(87, SIGSEGV, "address error (exec)", address_error_exec, current)
-
-
-/* Implement misaligned load/store handling for kernel (and optionally for user
- mode too). Limitation : only SHmedia mode code is handled - there is no
- handling at all for misaligned accesses occurring in SHcompact code yet. */
-
-static int misaligned_fixup(struct pt_regs *regs);
-
-asmlinkage void do_address_error_load(unsigned long error_code, struct pt_regs *regs)
-{
- if (misaligned_fixup(regs) < 0) {
- do_unhandled_exception(7, SIGSEGV, "address error(load)",
- "do_address_error_load",
- error_code, regs, current);
- }
- return;
-}
-
-asmlinkage void do_address_error_store(unsigned long error_code, struct pt_regs *regs)
-{
- if (misaligned_fixup(regs) < 0) {
- do_unhandled_exception(8, SIGSEGV, "address error(store)",
- "do_address_error_store",
- error_code, regs, current);
- }
- return;
-}
-
-#if defined(CONFIG_SH64_ID2815_WORKAROUND)
-
-#define OPCODE_INVALID 0
-#define OPCODE_USER_VALID 1
-#define OPCODE_PRIV_VALID 2
-
-/* getcon/putcon - requires checking which control register is referenced. */
-#define OPCODE_CTRL_REG 3
-
-/* Table of valid opcodes for SHmedia mode.
- Form a 10-bit value by concatenating the major/minor opcodes i.e.
- opcode[31:26,20:16]. The 6 MSBs of this value index into the following
- array. The 4 LSBs select the bit-pair in the entry (bits 1:0 correspond to
- LSBs==4'b0000 etc). */
-static unsigned long shmedia_opcode_table[64] = {
- 0x55554044,0x54445055,0x15141514,0x14541414,0x00000000,0x10001000,0x01110055,0x04050015,
- 0x00000444,0xc0000000,0x44545515,0x40405555,0x55550015,0x10005555,0x55555505,0x04050000,
- 0x00000555,0x00000404,0x00040445,0x15151414,0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000055,0x40404444,0x00000404,0xc0009495,0x00000000,0x00000000,0x00000000,0x00000000,
- 0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
- 0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
- 0x80005050,0x04005055,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
- 0x81055554,0x00000404,0x55555555,0x55555555,0x00000000,0x00000000,0x00000000,0x00000000
-};
-
-void do_reserved_inst(unsigned long error_code, struct pt_regs *regs)
-{
- /* Workaround SH5-101 cut2 silicon defect #2815 :
- in some situations, inter-mode branches from SHcompact -> SHmedia
- which should take ITLBMISS or EXECPROT exceptions at the target
- falsely take RESINST at the target instead. */
-
- unsigned long opcode = 0x6ff4fff0; /* guaranteed reserved opcode */
- unsigned long pc, aligned_pc;
- int get_user_error;
- int trapnr = 12;
- int signr = SIGILL;
- char *exception_name = "reserved_instruction";
-
- pc = regs->pc;
- if ((pc & 3) == 1) {
- /* SHmedia : check for defect. This requires executable vmas
- to be readable too. */
- aligned_pc = pc & ~3;
- if (!access_ok(VERIFY_READ, aligned_pc, sizeof(unsigned long))) {
- get_user_error = -EFAULT;
- } else {
- get_user_error = __get_user(opcode, (unsigned long *)aligned_pc);
- }
- if (get_user_error >= 0) {
- unsigned long index, shift;
- unsigned long major, minor, combined;
- unsigned long reserved_field;
- reserved_field = opcode & 0xf; /* These bits are currently reserved as zero in all valid opcodes */
- major = (opcode >> 26) & 0x3f;
- minor = (opcode >> 16) & 0xf;
- combined = (major << 4) | minor;
- index = major;
- shift = minor << 1;
- if (reserved_field == 0) {
- int opcode_state = (shmedia_opcode_table[index] >> shift) & 0x3;
- switch (opcode_state) {
- case OPCODE_INVALID:
- /* Trap. */
- break;
- case OPCODE_USER_VALID:
- /* Restart the instruction : the branch to the instruction will now be from an RTE
- not from SHcompact so the silicon defect won't be triggered. */
- return;
- case OPCODE_PRIV_VALID:
- if (!user_mode(regs)) {
- /* Should only ever get here if a module has
- SHcompact code inside it. If so, the same fix up is needed. */
- return; /* same reason */
- }
- /* Otherwise, user mode trying to execute a privileged instruction -
- fall through to trap. */
- break;
- case OPCODE_CTRL_REG:
- /* If in privileged mode, return as above. */
- if (!user_mode(regs)) return;
- /* In user mode ... */
- if (combined == 0x9f) { /* GETCON */
- unsigned long regno = (opcode >> 20) & 0x3f;
- if (regno >= 62) {
- return;
- }
- /* Otherwise, reserved or privileged control register, => trap */
- } else if (combined == 0x1bf) { /* PUTCON */
- unsigned long regno = (opcode >> 4) & 0x3f;
- if (regno >= 62) {
- return;
- }
- /* Otherwise, reserved or privileged control register, => trap */
- } else {
- /* Trap */
- }
- break;
- default:
- /* Fall through to trap. */
- break;
- }
- }
- /* fall through to normal resinst processing */
- } else {
- /* Error trying to read opcode. This typically means a
- real fault, not a RESINST any more. So change the
- codes. */
- trapnr = 87;
- exception_name = "address error (exec)";
- signr = SIGSEGV;
- }
- }
-
- do_unhandled_exception(trapnr, signr, exception_name, "do_reserved_inst", error_code, regs, current);
-}
-
-#else /* CONFIG_SH64_ID2815_WORKAROUND */
-
-/* If the workaround isn't needed, this is just a straightforward reserved
- instruction */
-DO_ERROR(12, SIGILL, "reserved instruction", reserved_inst, current)
-
-#endif /* CONFIG_SH64_ID2815_WORKAROUND */
-
-/* Called with interrupts disabled */
-asmlinkage void do_exception_error(unsigned long ex, struct pt_regs *regs)
-{
- show_excp_regs(__func__, -1, -1, regs);
- die_if_kernel("exception", regs, ex);
-}
-
-int do_unknown_trapa(unsigned long scId, struct pt_regs *regs)
-{
- /* Syscall debug */
- printk("System call ID error: [0x1#args:8 #syscall:16 0x%lx]\n", scId);
-
- die_if_kernel("unknown trapa", regs, scId);
-
- return -ENOSYS;
-}
-
-void show_stack(struct task_struct *tsk, unsigned long *sp)
-{
-#ifdef CONFIG_KALLSYMS
- extern void sh64_unwind(struct pt_regs *regs);
- struct pt_regs *regs;
-
- regs = tsk ? tsk->thread.kregs : NULL;
-
- sh64_unwind(regs);
-#else
- printk(KERN_ERR "Can't backtrace on sh64 without CONFIG_KALLSYMS\n");
-#endif
-}
-
-void show_task(unsigned long *sp)
-{
- show_stack(NULL, sp);
-}
-
-void dump_stack(void)
-{
- show_task(NULL);
-}
-/* Needed by any user of WARN_ON in view of the defn in include/asm-sh/bug.h */
-EXPORT_SYMBOL(dump_stack);
-
-static void do_unhandled_exception(int trapnr, int signr, char *str, char *fn_name,
- unsigned long error_code, struct pt_regs *regs, struct task_struct *tsk)
-{
- show_excp_regs(fn_name, trapnr, signr, regs);
-
- if (user_mode(regs))
- force_sig(signr, tsk);
-
- die_if_no_fixup(str, regs, error_code);
-}
-
-static int read_opcode(unsigned long long pc, unsigned long *result_opcode, int from_user_mode)
+static int read_opcode(reg_size_t pc, insn_size_t *result_opcode, int from_user_mode)
{
int get_user_error;
unsigned long aligned_pc;
- unsigned long opcode;
+ insn_size_t opcode;
if ((pc & 3) == 1) {
/* SHmedia */
aligned_pc = pc & ~3;
if (from_user_mode) {
- if (!access_ok(VERIFY_READ, aligned_pc, sizeof(unsigned long))) {
+ if (!access_ok(VERIFY_READ, aligned_pc, sizeof(insn_size_t))) {
get_user_error = -EFAULT;
} else {
- get_user_error = __get_user(opcode, (unsigned long *)aligned_pc);
+ get_user_error = __get_user(opcode, (insn_size_t *)aligned_pc);
*result_opcode = opcode;
}
return get_user_error;
@@ -311,7 +53,7 @@
/* If the fault was in the kernel, we can either read
* this directly, or if not, we fault.
*/
- *result_opcode = *(unsigned long *) aligned_pc;
+ *result_opcode = *(insn_size_t *)aligned_pc;
return 0;
}
} else if ((pc & 1) == 0) {
@@ -337,17 +79,23 @@
#endif
}
+/* return -1 for fault, 0 for OK */
static int generate_and_check_address(struct pt_regs *regs,
- __u32 opcode,
+ insn_size_t opcode,
int displacement_not_indexed,
int width_shift,
__u64 *address)
{
- /* return -1 for fault, 0 for OK */
-
__u64 base_address, addr;
int basereg;
+ switch (1 << width_shift) {
+ case 1: inc_unaligned_byte_access(); break;
+ case 2: inc_unaligned_word_access(); break;
+ case 4: inc_unaligned_dword_access(); break;
+ case 8: inc_unaligned_multi_access(); break;
+ }
+
basereg = (opcode >> 20) & 0x3f;
base_address = regs->regs[basereg];
if (displacement_not_indexed) {
@@ -364,28 +112,28 @@
}
/* Check sign extended */
- if (!address_is_sign_extended(addr)) {
+ if (!address_is_sign_extended(addr))
return -1;
- }
/* Check accessible. For misaligned access in the kernel, assume the
address is always accessible (and if not, just fault when the
load/store gets done.) */
if (user_mode(regs)) {
- if (addr >= TASK_SIZE) {
+ inc_unaligned_user_access();
+
+ if (addr >= TASK_SIZE)
return -1;
- }
- /* Do access_ok check later - it depends on whether it's a load or a store. */
- }
+ } else
+ inc_unaligned_kernel_access();
*address = addr;
+
+ perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, addr);
+ unaligned_fixups_notify(current, opcode, regs);
+
return 0;
}
-static int user_mode_unaligned_fixup_count = 10;
-static int user_mode_unaligned_fixup_enable = 1;
-static int kernel_mode_unaligned_fixup_count = 32;
-
static void misaligned_kernel_word_load(__u64 address, int do_sign_extend, __u64 *result)
{
unsigned short x;
@@ -415,7 +163,7 @@
}
static int misaligned_load(struct pt_regs *regs,
- __u32 opcode,
+ insn_size_t opcode,
int displacement_not_indexed,
int width_shift,
int do_sign_extend)
@@ -427,11 +175,8 @@
error = generate_and_check_address(regs, opcode,
displacement_not_indexed, width_shift, &address);
- if (error < 0) {
+ if (error < 0)
return error;
- }
-
- perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, 1, regs, address);
destreg = (opcode >> 4) & 0x3f;
if (user_mode(regs)) {
@@ -490,11 +235,10 @@
}
return 0;
-
}
static int misaligned_store(struct pt_regs *regs,
- __u32 opcode,
+ insn_size_t opcode,
int displacement_not_indexed,
int width_shift)
{
@@ -505,11 +249,8 @@
error = generate_and_check_address(regs, opcode,
displacement_not_indexed, width_shift, &address);
- if (error < 0) {
+ if (error < 0)
return error;
- }
-
- perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, 1, regs, address);
srcreg = (opcode >> 4) & 0x3f;
if (user_mode(regs)) {
@@ -563,13 +304,12 @@
}
return 0;
-
}
/* Never need to fix up misaligned FPU accesses within the kernel since that's a real
error. */
static int misaligned_fpu_load(struct pt_regs *regs,
- __u32 opcode,
+ insn_size_t opcode,
int displacement_not_indexed,
int width_shift,
int do_paired_load)
@@ -581,11 +321,8 @@
error = generate_and_check_address(regs, opcode,
displacement_not_indexed, width_shift, &address);
- if (error < 0) {
+ if (error < 0)
return error;
- }
-
- perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, address);
destreg = (opcode >> 4) & 0x3f;
if (user_mode(regs)) {
@@ -641,12 +378,10 @@
die ("Misaligned FPU load inside kernel", regs, 0);
return -1;
}
-
-
}
static int misaligned_fpu_store(struct pt_regs *regs,
- __u32 opcode,
+ insn_size_t opcode,
int displacement_not_indexed,
int width_shift,
int do_paired_load)
@@ -658,11 +393,8 @@
error = generate_and_check_address(regs, opcode,
displacement_not_indexed, width_shift, &address);
- if (error < 0) {
+ if (error < 0)
return error;
- }
-
- perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, address);
srcreg = (opcode >> 4) & 0x3f;
if (user_mode(regs)) {
@@ -723,11 +455,13 @@
static int misaligned_fixup(struct pt_regs *regs)
{
- unsigned long opcode;
+ insn_size_t opcode;
int error;
int major, minor;
+ unsigned int user_action;
- if (!user_mode_unaligned_fixup_enable)
+ user_action = unaligned_user_action();
+ if (!(user_action & UM_FIXUP))
return -1;
error = read_opcode(regs->pc, &opcode, user_mode(regs));
@@ -737,23 +471,6 @@
major = (opcode >> 26) & 0x3f;
minor = (opcode >> 16) & 0xf;
- if (user_mode(regs) && (user_mode_unaligned_fixup_count > 0)) {
- --user_mode_unaligned_fixup_count;
- /* Only do 'count' worth of these reports, to remove a potential DoS against syslog */
- printk("Fixing up unaligned userspace access in \"%s\" pid=%d pc=0x%08x ins=0x%08lx\n",
- current->comm, task_pid_nr(current), (__u32)regs->pc, opcode);
- } else if (!user_mode(regs) && (kernel_mode_unaligned_fixup_count > 0)) {
- --kernel_mode_unaligned_fixup_count;
- if (in_interrupt()) {
- printk("Fixing up unaligned kernelspace access in interrupt pc=0x%08x ins=0x%08lx\n",
- (__u32)regs->pc, opcode);
- } else {
- printk("Fixing up unaligned kernelspace access in \"%s\" pid=%d pc=0x%08x ins=0x%08lx\n",
- current->comm, task_pid_nr(current), (__u32)regs->pc, opcode);
- }
- }
-
-
switch (major) {
case (0x84>>2): /* LD.W */
error = misaligned_load(regs, opcode, 1, 1, 1);
@@ -878,59 +595,202 @@
regs->pc += 4; /* Skip the instruction that's just been emulated */
return 0;
}
-
}
-static ctl_table unaligned_table[] = {
- {
- .procname = "kernel_reports",
- .data = &kernel_mode_unaligned_fixup_count,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_dointvec
- },
- {
- .procname = "user_reports",
- .data = &user_mode_unaligned_fixup_count,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_dointvec
- },
- {
- .procname = "user_enable",
- .data = &user_mode_unaligned_fixup_enable,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_dointvec},
- {}
-};
-
-static ctl_table unaligned_root[] = {
- {
- .procname = "unaligned_fixup",
- .mode = 0555,
- .child = unaligned_table
- },
- {}
-};
-
-static ctl_table sh64_root[] = {
- {
- .procname = "sh64",
- .mode = 0555,
- .child = unaligned_root
- },
- {}
-};
-static struct ctl_table_header *sysctl_header;
-static int __init init_sysctl(void)
+static void do_unhandled_exception(int signr, char *str, unsigned long error,
+ struct pt_regs *regs)
{
- sysctl_header = register_sysctl_table(sh64_root);
- return 0;
+ if (user_mode(regs))
+ force_sig(signr, current);
+
+ die_if_no_fixup(str, regs, error);
}
-__initcall(init_sysctl);
+#define DO_ERROR(signr, str, name) \
+asmlinkage void do_##name(unsigned long error_code, struct pt_regs *regs) \
+{ \
+ do_unhandled_exception(signr, str, error_code, regs); \
+}
+DO_ERROR(SIGILL, "illegal slot instruction", illegal_slot_inst)
+DO_ERROR(SIGSEGV, "address error (exec)", address_error_exec)
+
+#if defined(CONFIG_SH64_ID2815_WORKAROUND)
+
+#define OPCODE_INVALID 0
+#define OPCODE_USER_VALID 1
+#define OPCODE_PRIV_VALID 2
+
+/* getcon/putcon - requires checking which control register is referenced. */
+#define OPCODE_CTRL_REG 3
+
+/* Table of valid opcodes for SHmedia mode.
+ Form a 10-bit value by concatenating the major/minor opcodes i.e.
+ opcode[31:26,20:16]. The 6 MSBs of this value index into the following
+ array. The 4 LSBs select the bit-pair in the entry (bits 1:0 correspond to
+ LSBs==4'b0000 etc). */
+static unsigned long shmedia_opcode_table[64] = {
+ 0x55554044,0x54445055,0x15141514,0x14541414,0x00000000,0x10001000,0x01110055,0x04050015,
+ 0x00000444,0xc0000000,0x44545515,0x40405555,0x55550015,0x10005555,0x55555505,0x04050000,
+ 0x00000555,0x00000404,0x00040445,0x15151414,0x00000000,0x00000000,0x00000000,0x00000000,
+ 0x00000055,0x40404444,0x00000404,0xc0009495,0x00000000,0x00000000,0x00000000,0x00000000,
+ 0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
+ 0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
+ 0x80005050,0x04005055,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
+ 0x81055554,0x00000404,0x55555555,0x55555555,0x00000000,0x00000000,0x00000000,0x00000000
+};
+
+/* Workaround SH5-101 cut2 silicon defect #2815 :
+ in some situations, inter-mode branches from SHcompact -> SHmedia
+ which should take ITLBMISS or EXECPROT exceptions at the target
+ falsely take RESINST at the target instead. */
+void do_reserved_inst(unsigned long error_code, struct pt_regs *regs)
+{
+ insn_size_t opcode = 0x6ff4fff0; /* guaranteed reserved opcode */
+ unsigned long pc, aligned_pc;
+ unsigned long index, shift;
+ unsigned long major, minor, combined;
+ unsigned long reserved_field;
+ int opcode_state;
+ int get_user_error;
+ int signr = SIGILL;
+ char *exception_name = "reserved_instruction";
+
+ pc = regs->pc;
+
+ /* SHcompact is not handled */
+ if (unlikely((pc & 3) == 0))
+ goto out;
+
+ /* SHmedia : check for defect. This requires executable vmas
+ to be readable too. */
+ aligned_pc = pc & ~3;
+ if (!access_ok(VERIFY_READ, aligned_pc, sizeof(insn_size_t)))
+ get_user_error = -EFAULT;
+ else
+ get_user_error = __get_user(opcode, (insn_size_t *)aligned_pc);
+
+ if (get_user_error < 0) {
+ /*
+ * Error trying to read opcode. This typically means a
+ * real fault, not a RESINST any more. So change the
+ * codes.
+ */
+ exception_name = "address error (exec)";
+ signr = SIGSEGV;
+ goto out;
+ }
+
+ /* These bits are currently reserved as zero in all valid opcodes */
+ reserved_field = opcode & 0xf;
+ if (unlikely(reserved_field))
+ goto out; /* invalid opcode */
+
+ major = (opcode >> 26) & 0x3f;
+ minor = (opcode >> 16) & 0xf;
+ combined = (major << 4) | minor;
+ index = major;
+ shift = minor << 1;
+ opcode_state = (shmedia_opcode_table[index] >> shift) & 0x3;
+ switch (opcode_state) {
+ case OPCODE_INVALID:
+ /* Trap. */
+ break;
+ case OPCODE_USER_VALID:
+ /*
+ * Restart the instruction: the branch to the instruction
+ * will now be from an RTE not from SHcompact so the
+ * silicon defect won't be triggered.
+ */
+ return;
+ case OPCODE_PRIV_VALID:
+ if (!user_mode(regs)) {
+ /*
+ * Should only ever get here if a module has
+ * SHcompact code inside it. If so, the same fix
+ * up is needed.
+ */
+ return; /* same reason */
+ }
+
+ /*
+ * Otherwise, user mode trying to execute a privileged
+ * instruction - fall through to trap.
+ */
+ break;
+ case OPCODE_CTRL_REG:
+ /* If in privileged mode, return as above. */
+ if (!user_mode(regs))
+ return;
+
+ /* In user mode ... */
+ if (combined == 0x9f) { /* GETCON */
+ unsigned long regno = (opcode >> 20) & 0x3f;
+
+ if (regno >= 62)
+ return;
+
+ /* reserved/privileged control register => trap */
+ } else if (combined == 0x1bf) { /* PUTCON */
+ unsigned long regno = (opcode >> 4) & 0x3f;
+
+ if (regno >= 62)
+ return;
+
+ /* reserved/privileged control register => trap */
+ }
+
+ break;
+ default:
+ /* Fall through to trap. */
+ break;
+ }
+
+out:
+ do_unhandled_exception(signr, exception_name, error_code, regs);
+}
+
+#else /* CONFIG_SH64_ID2815_WORKAROUND */
+
+/* If the workaround isn't needed, this is just a straightforward reserved
+ instruction */
+DO_ERROR(SIGILL, "reserved instruction", reserved_inst)
+
+#endif /* CONFIG_SH64_ID2815_WORKAROUND */
+
+/* Called with interrupts disabled */
+asmlinkage void do_exception_error(unsigned long ex, struct pt_regs *regs)
+{
+ die_if_kernel("exception", regs, ex);
+}
+
+asmlinkage int do_unknown_trapa(unsigned long scId, struct pt_regs *regs)
+{
+ /* Syscall debug */
+ printk("System call ID error: [0x1#args:8 #syscall:16 0x%lx]\n", scId);
+
+ die_if_kernel("unknown trapa", regs, scId);
+
+ return -ENOSYS;
+}
+
+/* Implement misaligned load/store handling for kernel (and optionally for user
+ mode too). Limitation : only SHmedia mode code is handled - there is no
+ handling at all for misaligned accesses occurring in SHcompact code yet. */
+
+asmlinkage void do_address_error_load(unsigned long error_code, struct pt_regs *regs)
+{
+ if (misaligned_fixup(regs) < 0)
+ do_unhandled_exception(SIGSEGV, "address error(load)",
+ error_code, regs);
+}
+
+asmlinkage void do_address_error_store(unsigned long error_code, struct pt_regs *regs)
+{
+ if (misaligned_fixup(regs) < 0)
+ do_unhandled_exception(SIGSEGV, "address error(store)",
+ error_code, regs);
+}
asmlinkage void do_debug_interrupt(unsigned long code, struct pt_regs *regs)
{
@@ -942,10 +802,9 @@
of access we make to them - just go direct to their physical
addresses. */
exp_cause = peek_real_address_q(DM_EXP_CAUSE_PHY);
- if (exp_cause & ~4) {
+ if (exp_cause & ~4)
printk("DM.EXP_CAUSE had unexpected bits set (=%08lx)\n",
(unsigned long)(exp_cause & 0xffffffff));
- }
show_state();
/* Clear all DEBUGINT causes */
poke_real_address_q(DM_EXP_CAUSE_PHY, 0x0);
diff --git a/arch/sh/lib64/Makefile b/arch/sh/lib64/Makefile
index 1fee75a..69779ff 100644
--- a/arch/sh/lib64/Makefile
+++ b/arch/sh/lib64/Makefile
@@ -10,7 +10,7 @@
#
# Panic should really be compiled as PIC
-lib-y := udelay.o dbg.o panic.o memcpy.o memset.o \
+lib-y := udelay.o panic.o memcpy.o memset.o \
copy_user_memcpy.o copy_page.o strcpy.o strlen.o
# Extracted from libgcc
diff --git a/arch/sh/lib64/dbg.c b/arch/sh/lib64/dbg.c
deleted file mode 100644
index 6152a6a..0000000
--- a/arch/sh/lib64/dbg.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*--------------------------------------------------------------------------
---
--- Identity : Linux50 Debug Funcions
---
--- File : arch/sh/lib64/dbg.c
---
--- Copyright 2000, 2001 STMicroelectronics Limited.
--- Copyright 2004 Richard Curnow (evt_debug etc)
---
---------------------------------------------------------------------------*/
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <asm/mmu_context.h>
-
-typedef u64 regType_t;
-
-static regType_t getConfigReg(u64 id)
-{
- register u64 reg __asm__("r2");
- asm volatile ("getcfg %1, 0, %0":"=r" (reg):"r"(id));
- return (reg);
-}
-
-/* ======================================================================= */
-
-static char *szTab[] = { "4k", "64k", "1M", "512M" };
-static char *protTab[] = { "----",
- "---R",
- "--X-",
- "--XR",
- "-W--",
- "-W-R",
- "-WX-",
- "-WXR",
- "U---",
- "U--R",
- "U-X-",
- "U-XR",
- "UW--",
- "UW-R",
- "UWX-",
- "UWXR"
-};
-#define ITLB_BASE 0x00000000
-#define DTLB_BASE 0x00800000
-#define MAX_TLBs 64
-/* PTE High */
-#define GET_VALID(pte) ((pte) & 0x1)
-#define GET_SHARED(pte) ((pte) & 0x2)
-#define GET_ASID(pte) ((pte >> 2) & 0x0ff)
-#define GET_EPN(pte) ((pte) & 0xfffff000)
-
-/* PTE Low */
-#define GET_CBEHAVIOR(pte) ((pte) & 0x3)
-#define GET_PAGE_SIZE(pte) szTab[((pte >> 3) & 0x3)]
-#define GET_PROTECTION(pte) protTab[((pte >> 6) & 0xf)]
-#define GET_PPN(pte) ((pte) & 0xfffff000)
-
-#define PAGE_1K_MASK 0x00000000
-#define PAGE_4K_MASK 0x00000010
-#define PAGE_64K_MASK 0x00000080
-#define MMU_PAGESIZE_MASK (PAGE_64K_MASK | PAGE_4K_MASK)
-#define PAGE_1MB_MASK MMU_PAGESIZE_MASK
-#define PAGE_1K (1024)
-#define PAGE_4K (1024 * 4)
-#define PAGE_64K (1024 * 64)
-#define PAGE_1MB (1024 * 1024)
-
-#define HOW_TO_READ_TLB_CONTENT \
- "[ ID] PPN EPN ASID Share CB P.Size PROT.\n"
-
-void print_single_tlb(unsigned long tlb, int single_print)
-{
- regType_t pteH;
- regType_t pteL;
- unsigned int valid, shared, asid, epn, cb, ppn;
- char *pSize;
- char *pProt;
-
- /*
- ** in case of single print <single_print> is true, this implies:
- ** 1) print the TLB in any case also if NOT VALID
- ** 2) print out the header
- */
-
- pteH = getConfigReg(tlb);
- valid = GET_VALID(pteH);
- if (single_print)
- printk(HOW_TO_READ_TLB_CONTENT);
- else if (!valid)
- return;
-
- pteL = getConfigReg(tlb + 1);
-
- shared = GET_SHARED(pteH);
- asid = GET_ASID(pteH);
- epn = GET_EPN(pteH);
- cb = GET_CBEHAVIOR(pteL);
- pSize = GET_PAGE_SIZE(pteL);
- pProt = GET_PROTECTION(pteL);
- ppn = GET_PPN(pteL);
- printk("[%c%2ld] 0x%08x 0x%08x %03d %02x %02x %4s %s\n",
- ((valid) ? ' ' : 'u'), ((tlb & 0x0ffff) / TLB_STEP),
- ppn, epn, asid, shared, cb, pSize, pProt);
-}
-
-void print_dtlb(void)
-{
- int count;
- unsigned long tlb;
-
- printk(" ================= SH-5 D-TLBs Status ===================\n");
- printk(HOW_TO_READ_TLB_CONTENT);
- tlb = DTLB_BASE;
- for (count = 0; count < MAX_TLBs; count++, tlb += TLB_STEP)
- print_single_tlb(tlb, 0);
- printk
- (" =============================================================\n");
-}
-
-void print_itlb(void)
-{
- int count;
- unsigned long tlb;
-
- printk(" ================= SH-5 I-TLBs Status ===================\n");
- printk(HOW_TO_READ_TLB_CONTENT);
- tlb = ITLB_BASE;
- for (count = 0; count < MAX_TLBs; count++, tlb += TLB_STEP)
- print_single_tlb(tlb, 0);
- printk
- (" =============================================================\n");
-}
-
-void show_excp_regs(char *from, int trapnr, int signr, struct pt_regs *regs)
-{
-
- unsigned long long ah, al, bh, bl, ch, cl;
-
- printk("\n");
- printk("EXCEPTION - %s: task %d; Linux trap # %d; signal = %d\n",
- ((from) ? from : "???"), current->pid, trapnr, signr);
-
- asm volatile ("getcon " __EXPEVT ", %0":"=r"(ah));
- asm volatile ("getcon " __EXPEVT ", %0":"=r"(al));
- ah = (ah) >> 32;
- al = (al) & 0xffffffff;
- asm volatile ("getcon " __KCR1 ", %0":"=r"(bh));
- asm volatile ("getcon " __KCR1 ", %0":"=r"(bl));
- bh = (bh) >> 32;
- bl = (bl) & 0xffffffff;
- asm volatile ("getcon " __INTEVT ", %0":"=r"(ch));
- asm volatile ("getcon " __INTEVT ", %0":"=r"(cl));
- ch = (ch) >> 32;
- cl = (cl) & 0xffffffff;
- printk("EXPE: %08Lx%08Lx KCR1: %08Lx%08Lx INTE: %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- asm volatile ("getcon " __PEXPEVT ", %0":"=r"(ah));
- asm volatile ("getcon " __PEXPEVT ", %0":"=r"(al));
- ah = (ah) >> 32;
- al = (al) & 0xffffffff;
- asm volatile ("getcon " __PSPC ", %0":"=r"(bh));
- asm volatile ("getcon " __PSPC ", %0":"=r"(bl));
- bh = (bh) >> 32;
- bl = (bl) & 0xffffffff;
- asm volatile ("getcon " __PSSR ", %0":"=r"(ch));
- asm volatile ("getcon " __PSSR ", %0":"=r"(cl));
- ch = (ch) >> 32;
- cl = (cl) & 0xffffffff;
- printk("PEXP: %08Lx%08Lx PSPC: %08Lx%08Lx PSSR: %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->pc) >> 32;
- al = (regs->pc) & 0xffffffff;
- bh = (regs->regs[18]) >> 32;
- bl = (regs->regs[18]) & 0xffffffff;
- ch = (regs->regs[15]) >> 32;
- cl = (regs->regs[15]) & 0xffffffff;
- printk("PC : %08Lx%08Lx LINK: %08Lx%08Lx SP : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->sr) >> 32;
- al = (regs->sr) & 0xffffffff;
- asm volatile ("getcon " __TEA ", %0":"=r"(bh));
- asm volatile ("getcon " __TEA ", %0":"=r"(bl));
- bh = (bh) >> 32;
- bl = (bl) & 0xffffffff;
- asm volatile ("getcon " __KCR0 ", %0":"=r"(ch));
- asm volatile ("getcon " __KCR0 ", %0":"=r"(cl));
- ch = (ch) >> 32;
- cl = (cl) & 0xffffffff;
- printk("SR : %08Lx%08Lx TEA : %08Lx%08Lx KCR0: %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[0]) >> 32;
- al = (regs->regs[0]) & 0xffffffff;
- bh = (regs->regs[1]) >> 32;
- bl = (regs->regs[1]) & 0xffffffff;
- ch = (regs->regs[2]) >> 32;
- cl = (regs->regs[2]) & 0xffffffff;
- printk("R0 : %08Lx%08Lx R1 : %08Lx%08Lx R2 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[3]) >> 32;
- al = (regs->regs[3]) & 0xffffffff;
- bh = (regs->regs[4]) >> 32;
- bl = (regs->regs[4]) & 0xffffffff;
- ch = (regs->regs[5]) >> 32;
- cl = (regs->regs[5]) & 0xffffffff;
- printk("R3 : %08Lx%08Lx R4 : %08Lx%08Lx R5 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[6]) >> 32;
- al = (regs->regs[6]) & 0xffffffff;
- bh = (regs->regs[7]) >> 32;
- bl = (regs->regs[7]) & 0xffffffff;
- ch = (regs->regs[8]) >> 32;
- cl = (regs->regs[8]) & 0xffffffff;
- printk("R6 : %08Lx%08Lx R7 : %08Lx%08Lx R8 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
-
- ah = (regs->regs[9]) >> 32;
- al = (regs->regs[9]) & 0xffffffff;
- bh = (regs->regs[10]) >> 32;
- bl = (regs->regs[10]) & 0xffffffff;
- ch = (regs->regs[11]) >> 32;
- cl = (regs->regs[11]) & 0xffffffff;
- printk("R9 : %08Lx%08Lx R10 : %08Lx%08Lx R11 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
- printk("....\n");
-
- ah = (regs->tregs[0]) >> 32;
- al = (regs->tregs[0]) & 0xffffffff;
- bh = (regs->tregs[1]) >> 32;
- bl = (regs->tregs[1]) & 0xffffffff;
- ch = (regs->tregs[2]) >> 32;
- cl = (regs->tregs[2]) & 0xffffffff;
- printk("T0 : %08Lx%08Lx T1 : %08Lx%08Lx T2 : %08Lx%08Lx\n",
- ah, al, bh, bl, ch, cl);
- printk("....\n");
-
- print_dtlb();
- print_itlb();
-}
diff --git a/arch/sh/mm/tlb-sh5.c b/arch/sh/mm/tlb-sh5.c
index 3aea25d..ff1c40a 100644
--- a/arch/sh/mm/tlb-sh5.c
+++ b/arch/sh/mm/tlb-sh5.c
@@ -17,7 +17,7 @@
/**
* sh64_tlb_init - Perform initial setup for the DTLB and ITLB.
*/
-int __init sh64_tlb_init(void)
+int __cpuinit sh64_tlb_init(void)
{
/* Assign some sane DTLB defaults */
cpu_data->dtlb.entries = 64;
diff --git a/arch/sparc/include/asm/cmt.h b/arch/sparc/include/asm/cmt.h
deleted file mode 100644
index 870db59..0000000
--- a/arch/sparc/include/asm/cmt.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef _SPARC64_CMT_H
-#define _SPARC64_CMT_H
-
-/* cmt.h: Chip Multi-Threading register definitions
- *
- * Copyright (C) 2004 David S. Miller (davem@redhat.com)
- */
-
-/* ASI_CORE_ID - private */
-#define LP_ID 0x0000000000000010UL
-#define LP_ID_MAX 0x00000000003f0000UL
-#define LP_ID_ID 0x000000000000003fUL
-
-/* ASI_INTR_ID - private */
-#define LP_INTR_ID 0x0000000000000000UL
-#define LP_INTR_ID_ID 0x00000000000003ffUL
-
-/* ASI_CESR_ID - private */
-#define CESR_ID 0x0000000000000040UL
-#define CESR_ID_ID 0x00000000000000ffUL
-
-/* ASI_CORE_AVAILABLE - shared */
-#define LP_AVAIL 0x0000000000000000UL
-#define LP_AVAIL_1 0x0000000000000002UL
-#define LP_AVAIL_0 0x0000000000000001UL
-
-/* ASI_CORE_ENABLE_STATUS - shared */
-#define LP_ENAB_STAT 0x0000000000000010UL
-#define LP_ENAB_STAT_1 0x0000000000000002UL
-#define LP_ENAB_STAT_0 0x0000000000000001UL
-
-/* ASI_CORE_ENABLE - shared */
-#define LP_ENAB 0x0000000000000020UL
-#define LP_ENAB_1 0x0000000000000002UL
-#define LP_ENAB_0 0x0000000000000001UL
-
-/* ASI_CORE_RUNNING - shared */
-#define LP_RUNNING_RW 0x0000000000000050UL
-#define LP_RUNNING_W1S 0x0000000000000060UL
-#define LP_RUNNING_W1C 0x0000000000000068UL
-#define LP_RUNNING_1 0x0000000000000002UL
-#define LP_RUNNING_0 0x0000000000000001UL
-
-/* ASI_CORE_RUNNING_STAT - shared */
-#define LP_RUN_STAT 0x0000000000000058UL
-#define LP_RUN_STAT_1 0x0000000000000002UL
-#define LP_RUN_STAT_0 0x0000000000000001UL
-
-/* ASI_XIR_STEERING - shared */
-#define LP_XIR_STEER 0x0000000000000030UL
-#define LP_XIR_STEER_1 0x0000000000000002UL
-#define LP_XIR_STEER_0 0x0000000000000001UL
-
-/* ASI_CMT_ERROR_STEERING - shared */
-#define CMT_ER_STEER 0x0000000000000040UL
-#define CMT_ER_STEER_1 0x0000000000000002UL
-#define CMT_ER_STEER_0 0x0000000000000001UL
-
-#endif /* _SPARC64_CMT_H */
diff --git a/arch/sparc/include/asm/mpmbox.h b/arch/sparc/include/asm/mpmbox.h
deleted file mode 100644
index f842303..0000000
--- a/arch/sparc/include/asm/mpmbox.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * mpmbox.h: Interface and defines for the OpenProm mailbox
- * facilities for MP machines under Linux.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_MPMBOX_H
-#define _SPARC_MPMBOX_H
-
-/* The prom allocates, for each CPU on the machine an unsigned
- * byte in physical ram. You probe the device tree prom nodes
- * for these values. The purpose of this byte is to be able to
- * pass messages from one cpu to another.
- */
-
-/* These are the main message types we have to look for in our
- * Cpu mailboxes, based upon these values we decide what course
- * of action to take.
- */
-
-/* The CPU is executing code in the kernel. */
-#define MAILBOX_ISRUNNING 0xf0
-
-/* Another CPU called romvec->pv_exit(), you should call
- * prom_stopcpu() when you see this in your mailbox.
- */
-#define MAILBOX_EXIT 0xfb
-
-/* Another CPU called romvec->pv_enter(), you should call
- * prom_cpuidle() when this is seen.
- */
-#define MAILBOX_GOSPIN 0xfc
-
-/* Another CPU has hit a breakpoint either into kadb or the prom
- * itself. Just like MAILBOX_GOSPIN, you should call prom_cpuidle()
- * at this point.
- */
-#define MAILBOX_BPT_SPIN 0xfd
-
-/* Oh geese, some other nitwit got a damn watchdog reset. The party's
- * over so go call prom_stopcpu().
- */
-#define MAILBOX_WDOG_STOP 0xfe
-
-#ifndef __ASSEMBLY__
-
-/* Handy macro's to determine a cpu's state. */
-
-/* Is the cpu still in Power On Self Test? */
-#define MBOX_POST_P(letter) ((letter) >= 0x00 && (letter) <= 0x7f)
-
-/* Is the cpu at the 'ok' prompt of the PROM? */
-#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f)
-
-/* Is the cpu spinning in the PROM? */
-#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef)
-
-/* Sanity check... This is junk mail, throw it out. */
-#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa)
-
-/* Is the cpu actively running an application/kernel-code? */
-#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING)
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_SPARC_MPMBOX_H) */
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index f591598..781bcb1 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -103,8 +103,6 @@
if (cheetah_pcache_forced_on)
cheetah_enable_pcache();
- local_irq_enable();
-
callin_flag = 1;
__asm__ __volatile__("membar #Sync\n\t"
"flush %%g6" : : : "memory");
@@ -124,9 +122,8 @@
while (!cpumask_test_cpu(cpuid, &smp_commenced_mask))
rmb();
- ipi_call_lock_irq();
set_cpu_online(cpuid, true);
- ipi_call_unlock_irq();
+ local_irq_enable();
/* idle thread is expected to have preempt disabled */
preempt_disable();
@@ -1308,9 +1305,7 @@
mdelay(1);
local_irq_disable();
- ipi_call_lock();
set_cpu_online(cpu, false);
- ipi_call_unlock();
cpu_map_rebuild();
diff --git a/arch/sparc/kernel/vio.c b/arch/sparc/kernel/vio.c
index 5cffdc5..3e244f3 100644
--- a/arch/sparc/kernel/vio.c
+++ b/arch/sparc/kernel/vio.c
@@ -443,7 +443,7 @@
root_vdev = vio_create_one(hp, root, NULL);
err = -ENODEV;
if (!root_vdev) {
- printk(KERN_ERR "VIO: Coult not create root device.\n");
+ printk(KERN_ERR "VIO: Could not create root device.\n");
goto out_release;
}
diff --git a/arch/tile/include/asm/uaccess.h b/arch/tile/include/asm/uaccess.h
index c3dd275..9ab078a 100644
--- a/arch/tile/include/asm/uaccess.h
+++ b/arch/tile/include/asm/uaccess.h
@@ -146,7 +146,7 @@
#ifdef __tilegx__
#define __get_user_1(x, ptr, ret) __get_user_asm(ld1u, x, ptr, ret)
#define __get_user_2(x, ptr, ret) __get_user_asm(ld2u, x, ptr, ret)
-#define __get_user_4(x, ptr, ret) __get_user_asm(ld4u, x, ptr, ret)
+#define __get_user_4(x, ptr, ret) __get_user_asm(ld4s, x, ptr, ret)
#define __get_user_8(x, ptr, ret) __get_user_asm(ld, x, ptr, ret)
#else
#define __get_user_1(x, ptr, ret) __get_user_asm(lb_u, x, ptr, ret)
diff --git a/arch/tile/kernel/backtrace.c b/arch/tile/kernel/backtrace.c
index 9092ce8..f8b74ca 100644
--- a/arch/tile/kernel/backtrace.c
+++ b/arch/tile/kernel/backtrace.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/string.h>
+#include <asm/byteorder.h>
#include <asm/backtrace.h>
#include <asm/tile-desc.h>
#include <arch/abi.h>
@@ -336,8 +337,12 @@
bytes_to_prefetch / sizeof(tile_bundle_bits);
}
- /* Decode the next bundle. */
- bundle.bits = prefetched_bundles[next_bundle++];
+ /*
+ * Decode the next bundle.
+ * TILE always stores instruction bundles in little-endian
+ * mode, even when the chip is running in big-endian mode.
+ */
+ bundle.bits = le64_to_cpu(prefetched_bundles[next_bundle++]);
bundle.num_insns =
parse_insn_tile(bundle.bits, pc, bundle.insns);
num_info_ops = bt_get_info_ops(&bundle, info_operands);
diff --git a/arch/tile/kernel/smpboot.c b/arch/tile/kernel/smpboot.c
index 84873fb..e686c5a 100644
--- a/arch/tile/kernel/smpboot.c
+++ b/arch/tile/kernel/smpboot.c
@@ -198,17 +198,7 @@
notify_cpu_starting(smp_processor_id());
- /*
- * We need to hold call_lock, so there is no inconsistency
- * between the time smp_call_function() determines number of
- * IPI recipients, and the time when the determination is made
- * for which cpus receive the IPI. Holding this
- * lock helps us to not include this cpu in a currently in progress
- * smp_call_function().
- */
- ipi_call_lock();
set_cpu_online(smp_processor_id(), 1);
- ipi_call_unlock();
__get_cpu_var(cpu_state) = CPU_ONLINE;
/* Set up tile-specific state for this cpu. */
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 88e466b..43b39d6 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -705,7 +705,6 @@
struct task_struct *from = current, *to = arg;
to->thread.saved_task = from;
- rcu_switch_from(from);
switch_to(from, to, from);
}
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 1f25214..b0c5276 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -49,6 +49,9 @@
KBUILD_AFLAGS += -m64
KBUILD_CFLAGS += -m64
+ # Use -mpreferred-stack-boundary=3 if supported.
+ KBUILD_CFLAGS += $(call cc-option,-mno-sse -mpreferred-stack-boundary=3)
+
# FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu)
cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona)
diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index be6d9e3..3470624 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -2460,10 +2460,12 @@
pxor IN3, STATE4
movaps IN4, IV
#else
- pxor (INP), STATE2
- pxor 0x10(INP), STATE3
pxor IN1, STATE4
movaps IN2, IV
+ movups (INP), IN1
+ pxor IN1, STATE2
+ movups 0x10(INP), IN2
+ pxor IN2, STATE3
#endif
movups STATE1, (OUTP)
movups STATE2, 0x10(OUTP)
diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index daeca56..673ac9b 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -38,7 +38,7 @@
int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
{
int err = 0;
- bool ia32 = is_ia32_task();
+ bool ia32 = test_thread_flag(TIF_IA32);
if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
return -EFAULT;
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 49331be..7078068 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -75,23 +75,54 @@
}
#endif /* CONFIG_SMP */
+#define OLDINSTR(oldinstr) "661:\n\t" oldinstr "\n662:\n"
+
+#define b_replacement(number) "663"#number
+#define e_replacement(number) "664"#number
+
+#define alt_slen "662b-661b"
+#define alt_rlen(number) e_replacement(number)"f-"b_replacement(number)"f"
+
+#define ALTINSTR_ENTRY(feature, number) \
+ " .long 661b - .\n" /* label */ \
+ " .long " b_replacement(number)"f - .\n" /* new instruction */ \
+ " .word " __stringify(feature) "\n" /* feature bit */ \
+ " .byte " alt_slen "\n" /* source len */ \
+ " .byte " alt_rlen(number) "\n" /* replacement len */
+
+#define DISCARD_ENTRY(number) /* rlen <= slen */ \
+ " .byte 0xff + (" alt_rlen(number) ") - (" alt_slen ")\n"
+
+#define ALTINSTR_REPLACEMENT(newinstr, feature, number) /* replacement */ \
+ b_replacement(number)":\n\t" newinstr "\n" e_replacement(number) ":\n\t"
+
/* alternative assembly primitive: */
#define ALTERNATIVE(oldinstr, newinstr, feature) \
- \
- "661:\n\t" oldinstr "\n662:\n" \
- ".section .altinstructions,\"a\"\n" \
- " .long 661b - .\n" /* label */ \
- " .long 663f - .\n" /* new instruction */ \
- " .word " __stringify(feature) "\n" /* feature bit */ \
- " .byte 662b-661b\n" /* sourcelen */ \
- " .byte 664f-663f\n" /* replacementlen */ \
- ".previous\n" \
- ".section .discard,\"aw\",@progbits\n" \
- " .byte 0xff + (664f-663f) - (662b-661b)\n" /* rlen <= slen */ \
- ".previous\n" \
- ".section .altinstr_replacement, \"ax\"\n" \
- "663:\n\t" newinstr "\n664:\n" /* replacement */ \
- ".previous"
+ OLDINSTR(oldinstr) \
+ ".section .altinstructions,\"a\"\n" \
+ ALTINSTR_ENTRY(feature, 1) \
+ ".previous\n" \
+ ".section .discard,\"aw\",@progbits\n" \
+ DISCARD_ENTRY(1) \
+ ".previous\n" \
+ ".section .altinstr_replacement, \"ax\"\n" \
+ ALTINSTR_REPLACEMENT(newinstr, feature, 1) \
+ ".previous"
+
+#define ALTERNATIVE_2(oldinstr, newinstr1, feature1, newinstr2, feature2)\
+ OLDINSTR(oldinstr) \
+ ".section .altinstructions,\"a\"\n" \
+ ALTINSTR_ENTRY(feature1, 1) \
+ ALTINSTR_ENTRY(feature2, 2) \
+ ".previous\n" \
+ ".section .discard,\"aw\",@progbits\n" \
+ DISCARD_ENTRY(1) \
+ DISCARD_ENTRY(2) \
+ ".previous\n" \
+ ".section .altinstr_replacement, \"ax\"\n" \
+ ALTINSTR_REPLACEMENT(newinstr1, feature1, 1) \
+ ALTINSTR_REPLACEMENT(newinstr2, feature2, 2) \
+ ".previous"
/*
* This must be included *after* the definition of ALTERNATIVE due to
@@ -140,6 +171,19 @@
: output : [old] "i" (oldfunc), [new] "i" (newfunc), ## input)
/*
+ * Like alternative_call, but there are two features and respective functions.
+ * If CPU has feature2, function2 is used.
+ * Otherwise, if CPU has feature1, function1 is used.
+ * Otherwise, old function is used.
+ */
+#define alternative_call_2(oldfunc, newfunc1, feature1, newfunc2, feature2, \
+ output, input...) \
+ asm volatile (ALTERNATIVE_2("call %P[old]", "call %P[new1]", feature1,\
+ "call %P[new2]", feature2) \
+ : output : [old] "i" (oldfunc), [new1] "i" (newfunc1), \
+ [new2] "i" (newfunc2), ## input)
+
+/*
* use this macro(s) if you need more than one output parameter
* in alternative_io
*/
diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h
index 49ad773..b3341e9 100644
--- a/arch/x86/include/asm/amd_nb.h
+++ b/arch/x86/include/asm/amd_nb.h
@@ -26,10 +26,31 @@
u8 subcaches[4];
};
+struct threshold_block {
+ unsigned int block;
+ unsigned int bank;
+ unsigned int cpu;
+ u32 address;
+ u16 interrupt_enable;
+ bool interrupt_capable;
+ u16 threshold_limit;
+ struct kobject kobj;
+ struct list_head miscj;
+};
+
+struct threshold_bank {
+ struct kobject *kobj;
+ struct threshold_block *blocks;
+
+ /* initialized to the number of CPUs on the node sharing this bank */
+ atomic_t cpus;
+};
+
struct amd_northbridge {
struct pci_dev *misc;
struct pci_dev *link;
struct amd_l3_cache l3_cache;
+ struct threshold_bank *bank4;
};
struct amd_northbridge_info {
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index eaff479..88093c1 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -306,7 +306,8 @@
unsigned long (*check_apicid_used)(physid_mask_t *map, int apicid);
unsigned long (*check_apicid_present)(int apicid);
- void (*vector_allocation_domain)(int cpu, struct cpumask *retmask);
+ void (*vector_allocation_domain)(int cpu, struct cpumask *retmask,
+ const struct cpumask *mask);
void (*init_apic_ldr)(void);
void (*ioapic_phys_id_map)(physid_mask_t *phys_map, physid_mask_t *retmap);
@@ -331,9 +332,9 @@
unsigned long (*set_apic_id)(unsigned int id);
unsigned long apic_id_mask;
- unsigned int (*cpu_mask_to_apicid)(const struct cpumask *cpumask);
- unsigned int (*cpu_mask_to_apicid_and)(const struct cpumask *cpumask,
- const struct cpumask *andmask);
+ int (*cpu_mask_to_apicid_and)(const struct cpumask *cpumask,
+ const struct cpumask *andmask,
+ unsigned int *apicid);
/* ipi */
void (*send_IPI_mask)(const struct cpumask *mask, int vector);
@@ -537,6 +538,11 @@
#endif
}
+static inline const struct cpumask *online_target_cpus(void)
+{
+ return cpu_online_mask;
+}
+
DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid);
@@ -586,21 +592,50 @@
#endif
-static inline unsigned int
-default_cpu_mask_to_apicid(const struct cpumask *cpumask)
+static inline int
+flat_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+ const struct cpumask *andmask,
+ unsigned int *apicid)
{
- return cpumask_bits(cpumask)[0] & APIC_ALL_CPUS;
+ unsigned long cpu_mask = cpumask_bits(cpumask)[0] &
+ cpumask_bits(andmask)[0] &
+ cpumask_bits(cpu_online_mask)[0] &
+ APIC_ALL_CPUS;
+
+ if (likely(cpu_mask)) {
+ *apicid = (unsigned int)cpu_mask;
+ return 0;
+ } else {
+ return -EINVAL;
+ }
}
-static inline unsigned int
+extern int
default_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
- const struct cpumask *andmask)
-{
- unsigned long mask1 = cpumask_bits(cpumask)[0];
- unsigned long mask2 = cpumask_bits(andmask)[0];
- unsigned long mask3 = cpumask_bits(cpu_online_mask)[0];
+ const struct cpumask *andmask,
+ unsigned int *apicid);
- return (unsigned int)(mask1 & mask2 & mask3);
+static inline void
+flat_vector_allocation_domain(int cpu, struct cpumask *retmask,
+ const struct cpumask *mask)
+{
+ /* Careful. Some cpus do not strictly honor the set of cpus
+ * specified in the interrupt destination when using lowest
+ * priority interrupt delivery mode.
+ *
+ * In particular there was a hyperthreading cpu observed to
+ * deliver interrupts to the wrong hyperthread when only one
+ * hyperthread was specified in the interrupt desitination.
+ */
+ cpumask_clear(retmask);
+ cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
+}
+
+static inline void
+default_vector_allocation_domain(int cpu, struct cpumask *retmask,
+ const struct cpumask *mask)
+{
+ cpumask_copy(retmask, cpumask_of(cpu));
}
static inline unsigned long default_check_apicid_used(physid_mask_t *map, int apicid)
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 340ee49..f91e80f 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -176,7 +176,7 @@
#define X86_FEATURE_XSAVEOPT (7*32+ 4) /* Optimized Xsave */
#define X86_FEATURE_PLN (7*32+ 5) /* Intel Power Limit Notification */
#define X86_FEATURE_PTS (7*32+ 6) /* Intel Package Thermal Status */
-#define X86_FEATURE_DTS (7*32+ 7) /* Digital Thermal Sensor */
+#define X86_FEATURE_DTHERM (7*32+ 7) /* Digital Thermal Sensor */
#define X86_FEATURE_HW_PSTATE (7*32+ 8) /* AMD HW-PState */
/* Virtualization flags: Linux defined, word 8 */
diff --git a/arch/x86/include/asm/emergency-restart.h b/arch/x86/include/asm/emergency-restart.h
index cc70c1c..75ce3f4 100644
--- a/arch/x86/include/asm/emergency-restart.h
+++ b/arch/x86/include/asm/emergency-restart.h
@@ -4,9 +4,7 @@
enum reboot_type {
BOOT_TRIPLE = 't',
BOOT_KBD = 'k',
-#ifdef CONFIG_X86_32
BOOT_BIOS = 'b',
-#endif
BOOT_ACPI = 'a',
BOOT_EFI = 'e',
BOOT_CF9 = 'p',
diff --git a/arch/x86/include/asm/floppy.h b/arch/x86/include/asm/floppy.h
index dbe82a5..d3d7469 100644
--- a/arch/x86/include/asm/floppy.h
+++ b/arch/x86/include/asm/floppy.h
@@ -99,7 +99,7 @@
virtual_dma_residue += virtual_dma_count;
virtual_dma_count = 0;
#ifdef TRACE_FLPY_INT
- printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
+ printk(KERN_DEBUG "count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
virtual_dma_count, virtual_dma_residue, calls, bytes,
dma_wait);
calls = 0;
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index db7c1f2..2da88c0 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -313,8 +313,8 @@
u64 counter_bitmask[2];
u64 global_ctrl_mask;
u8 version;
- struct kvm_pmc gp_counters[X86_PMC_MAX_GENERIC];
- struct kvm_pmc fixed_counters[X86_PMC_MAX_FIXED];
+ struct kvm_pmc gp_counters[INTEL_PMC_MAX_GENERIC];
+ struct kvm_pmc fixed_counters[INTEL_PMC_MAX_FIXED];
struct irq_work irq_work;
u64 reprogram_pmi;
};
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 084ef95..813ed10 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -115,8 +115,8 @@
extern unsigned long long native_read_tsc(void);
-extern int native_rdmsr_safe_regs(u32 regs[8]);
-extern int native_wrmsr_safe_regs(u32 regs[8]);
+extern int rdmsr_safe_regs(u32 regs[8]);
+extern int wrmsr_safe_regs(u32 regs[8]);
static __always_inline unsigned long long __native_read_tsc(void)
{
@@ -187,43 +187,6 @@
return err;
}
-static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
-{
- u32 gprs[8] = { 0 };
- int err;
-
- gprs[1] = msr;
- gprs[7] = 0x9c5a203a;
-
- err = native_rdmsr_safe_regs(gprs);
-
- *p = gprs[0] | ((u64)gprs[2] << 32);
-
- return err;
-}
-
-static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
-{
- u32 gprs[8] = { 0 };
-
- gprs[0] = (u32)val;
- gprs[1] = msr;
- gprs[2] = val >> 32;
- gprs[7] = 0x9c5a203a;
-
- return native_wrmsr_safe_regs(gprs);
-}
-
-static inline int rdmsr_safe_regs(u32 regs[8])
-{
- return native_rdmsr_safe_regs(regs);
-}
-
-static inline int wrmsr_safe_regs(u32 regs[8])
-{
- return native_wrmsr_safe_regs(regs);
-}
-
#define rdtscl(low) \
((low) = (u32)__native_read_tsc())
@@ -237,6 +200,8 @@
(high) = (u32)(_l >> 32); \
} while (0)
+#define rdpmcl(counter, val) ((val) = native_read_pmc(counter))
+
#define rdtscp(low, high, aux) \
do { \
unsigned long long _val = native_read_tscp(&(aux)); \
@@ -248,8 +213,7 @@
#endif /* !CONFIG_PARAVIRT */
-
-#define checking_wrmsrl(msr, val) wrmsr_safe((msr), (u32)(val), \
+#define wrmsrl_safe(msr, val) wrmsr_safe((msr), (u32)(val), \
(u32)((val) >> 32))
#define write_tsc(val1, val2) wrmsr(MSR_IA32_TSC, (val1), (val2))
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index dc580c4..c0fa356 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -44,28 +44,14 @@
const char *name;
};
-#define register_nmi_handler(t, fn, fg, n) \
+#define register_nmi_handler(t, fn, fg, n, init...) \
({ \
- static struct nmiaction fn##_na = { \
+ static struct nmiaction init fn##_na = { \
.handler = (fn), \
.name = (n), \
.flags = (fg), \
}; \
- __register_nmi_handler((t), &fn##_na); \
-})
-
-/*
- * For special handlers that register/unregister in the
- * init section only. This should be considered rare.
- */
-#define register_nmi_handler_initonly(t, fn, fg, n) \
-({ \
- static struct nmiaction fn##_na __initdata = { \
- .handler = (fn), \
- .name = (n), \
- .flags = (fg), \
- }; \
- __register_nmi_handler((t), &fn##_na); \
+ __register_nmi_handler((t), &fn##_na); \
})
int __register_nmi_handler(unsigned int, struct nmiaction *);
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 6cbbabf..0b47ddb 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -128,21 +128,11 @@
return PVOP_CALL2(u64, pv_cpu_ops.read_msr, msr, err);
}
-static inline int paravirt_rdmsr_regs(u32 *regs)
-{
- return PVOP_CALL1(int, pv_cpu_ops.rdmsr_regs, regs);
-}
-
static inline int paravirt_write_msr(unsigned msr, unsigned low, unsigned high)
{
return PVOP_CALL3(int, pv_cpu_ops.write_msr, msr, low, high);
}
-static inline int paravirt_wrmsr_regs(u32 *regs)
-{
- return PVOP_CALL1(int, pv_cpu_ops.wrmsr_regs, regs);
-}
-
/* These should all do BUG_ON(_err), but our headers are too tangled. */
#define rdmsr(msr, val1, val2) \
do { \
@@ -176,9 +166,6 @@
_err; \
})
-#define rdmsr_safe_regs(regs) paravirt_rdmsr_regs(regs)
-#define wrmsr_safe_regs(regs) paravirt_wrmsr_regs(regs)
-
static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
{
int err;
@@ -186,32 +173,6 @@
*p = paravirt_read_msr(msr, &err);
return err;
}
-static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
-{
- u32 gprs[8] = { 0 };
- int err;
-
- gprs[1] = msr;
- gprs[7] = 0x9c5a203a;
-
- err = paravirt_rdmsr_regs(gprs);
-
- *p = gprs[0] | ((u64)gprs[2] << 32);
-
- return err;
-}
-
-static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
-{
- u32 gprs[8] = { 0 };
-
- gprs[0] = (u32)val;
- gprs[1] = msr;
- gprs[2] = val >> 32;
- gprs[7] = 0x9c5a203a;
-
- return paravirt_wrmsr_regs(gprs);
-}
static inline u64 paravirt_read_tsc(void)
{
@@ -252,6 +213,8 @@
high = _l >> 32; \
} while (0)
+#define rdpmcl(counter, val) ((val) = paravirt_read_pmc(counter))
+
static inline unsigned long long paravirt_rdtscp(unsigned int *aux)
{
return PVOP_CALL1(u64, pv_cpu_ops.read_tscp, aux);
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index 8e8b9a4..8613cbb 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -153,9 +153,7 @@
/* MSR, PMC and TSR operations.
err = 0/-EFAULT. wrmsr returns 0/-EFAULT. */
u64 (*read_msr)(unsigned int msr, int *err);
- int (*rdmsr_regs)(u32 *regs);
int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
- int (*wrmsr_regs)(u32 *regs);
u64 (*read_tsc)(void);
u64 (*read_pmc)(int counter);
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index b3a5317..5ad24a8 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -7,9 +7,13 @@
#undef DEBUG
#ifdef DEBUG
-#define DBG(x...) printk(x)
+#define DBG(fmt, ...) printk(fmt, ##__VA_ARGS__)
#else
-#define DBG(x...)
+#define DBG(fmt, ...) \
+do { \
+ if (0) \
+ printk(fmt, ##__VA_ARGS__); \
+} while (0)
#endif
#define PCI_PROBE_BIOS 0x0001
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index 588f52e..c78f14a 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -5,11 +5,10 @@
* Performance event hw details:
*/
-#define X86_PMC_MAX_GENERIC 32
-#define X86_PMC_MAX_FIXED 3
+#define INTEL_PMC_MAX_GENERIC 32
+#define INTEL_PMC_MAX_FIXED 3
+#define INTEL_PMC_IDX_FIXED 32
-#define X86_PMC_IDX_GENERIC 0
-#define X86_PMC_IDX_FIXED 32
#define X86_PMC_IDX_MAX 64
#define MSR_ARCH_PERFMON_PERFCTR0 0xc1
@@ -48,8 +47,7 @@
(X86_RAW_EVENT_MASK | \
AMD64_EVENTSEL_EVENT)
#define AMD64_NUM_COUNTERS 4
-#define AMD64_NUM_COUNTERS_F15H 6
-#define AMD64_NUM_COUNTERS_MAX AMD64_NUM_COUNTERS_F15H
+#define AMD64_NUM_COUNTERS_CORE 6
#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL 0x3c
#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK (0x00 << 8)
@@ -121,16 +119,16 @@
/* Instr_Retired.Any: */
#define MSR_ARCH_PERFMON_FIXED_CTR0 0x309
-#define X86_PMC_IDX_FIXED_INSTRUCTIONS (X86_PMC_IDX_FIXED + 0)
+#define INTEL_PMC_IDX_FIXED_INSTRUCTIONS (INTEL_PMC_IDX_FIXED + 0)
/* CPU_CLK_Unhalted.Core: */
#define MSR_ARCH_PERFMON_FIXED_CTR1 0x30a
-#define X86_PMC_IDX_FIXED_CPU_CYCLES (X86_PMC_IDX_FIXED + 1)
+#define INTEL_PMC_IDX_FIXED_CPU_CYCLES (INTEL_PMC_IDX_FIXED + 1)
/* CPU_CLK_Unhalted.Ref: */
#define MSR_ARCH_PERFMON_FIXED_CTR2 0x30b
-#define X86_PMC_IDX_FIXED_REF_CYCLES (X86_PMC_IDX_FIXED + 2)
-#define X86_PMC_MSK_FIXED_REF_CYCLES (1ULL << X86_PMC_IDX_FIXED_REF_CYCLES)
+#define INTEL_PMC_IDX_FIXED_REF_CYCLES (INTEL_PMC_IDX_FIXED + 2)
+#define INTEL_PMC_MSK_FIXED_REF_CYCLES (1ULL << INTEL_PMC_IDX_FIXED_REF_CYCLES)
/*
* We model BTS tracing as another fixed-mode PMC.
@@ -139,7 +137,7 @@
* values are used by actual fixed events and higher values are used
* to indicate other overflow conditions in the PERF_GLOBAL_STATUS msr.
*/
-#define X86_PMC_IDX_FIXED_BTS (X86_PMC_IDX_FIXED + 16)
+#define INTEL_PMC_IDX_FIXED_BTS (INTEL_PMC_IDX_FIXED + 16)
/*
* IBS cpuid feature detection
@@ -234,6 +232,7 @@
extern struct perf_guest_switch_msr *perf_guest_get_msrs(int *nr);
extern void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap);
+extern void perf_check_microcode(void);
#else
static inline perf_guest_switch_msr *perf_guest_get_msrs(int *nr)
{
@@ -247,6 +246,7 @@
}
static inline void perf_events_lapic_init(void) { }
+static inline void perf_check_microcode(void) { }
#endif
#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD)
diff --git a/arch/x86/include/asm/pgtable-2level.h b/arch/x86/include/asm/pgtable-2level.h
index 98391db..f2b489c 100644
--- a/arch/x86/include/asm/pgtable-2level.h
+++ b/arch/x86/include/asm/pgtable-2level.h
@@ -2,9 +2,9 @@
#define _ASM_X86_PGTABLE_2LEVEL_H
#define pte_ERROR(e) \
- printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte_low)
+ pr_err("%s:%d: bad pte %08lx\n", __FILE__, __LINE__, (e).pte_low)
#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+ pr_err("%s:%d: bad pgd %08lx\n", __FILE__, __LINE__, pgd_val(e))
/*
* Certain architectures need to do special things when PTEs
diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
index 43876f1..4cc9f2b 100644
--- a/arch/x86/include/asm/pgtable-3level.h
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -9,13 +9,13 @@
*/
#define pte_ERROR(e) \
- printk("%s:%d: bad pte %p(%08lx%08lx).\n", \
+ pr_err("%s:%d: bad pte %p(%08lx%08lx)\n", \
__FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low)
#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %p(%016Lx).\n", \
+ pr_err("%s:%d: bad pmd %p(%016Lx)\n", \
__FILE__, __LINE__, &(e), pmd_val(e))
#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %p(%016Lx).\n", \
+ pr_err("%s:%d: bad pgd %p(%016Lx)\n", \
__FILE__, __LINE__, &(e), pgd_val(e))
/* Rules for using set_pte: the pte being assigned *must* be
@@ -47,16 +47,26 @@
* they can run pmd_offset_map_lock or pmd_trans_huge or other pmd
* operations.
*
- * Without THP if the mmap_sem is hold for reading, the
- * pmd can only transition from null to not null while pmd_read_atomic runs.
- * So there's no need of literally reading it atomically.
+ * Without THP if the mmap_sem is hold for reading, the pmd can only
+ * transition from null to not null while pmd_read_atomic runs. So
+ * we can always return atomic pmd values with this function.
*
* With THP if the mmap_sem is hold for reading, the pmd can become
- * THP or null or point to a pte (and in turn become "stable") at any
- * time under pmd_read_atomic, so it's mandatory to read it atomically
- * with cmpxchg8b.
+ * trans_huge or none or point to a pte (and in turn become "stable")
+ * at any time under pmd_read_atomic. We could read it really
+ * atomically here with a atomic64_read for the THP enabled case (and
+ * it would be a whole lot simpler), but to avoid using cmpxchg8b we
+ * only return an atomic pmdval if the low part of the pmdval is later
+ * found stable (i.e. pointing to a pte). And we're returning a none
+ * pmdval if the low part of the pmd is none. In some cases the high
+ * and low part of the pmdval returned may not be consistent if THP is
+ * enabled (the low part may point to previously mapped hugepage,
+ * while the high part may point to a more recently mapped hugepage),
+ * but pmd_none_or_trans_huge_or_clear_bad() only needs the low part
+ * of the pmd to be read atomically to decide if the pmd is unstable
+ * or not, with the only exception of when the low part of the pmd is
+ * zero in which case we return a none pmd.
*/
-#ifndef CONFIG_TRANSPARENT_HUGEPAGE
static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
{
pmdval_t ret;
@@ -74,12 +84,6 @@
return (pmd_t) { ret };
}
-#else /* CONFIG_TRANSPARENT_HUGEPAGE */
-static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
-{
- return (pmd_t) { atomic64_read((atomic64_t *)pmdp) };
-}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
{
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 975f709..8251be0 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -26,16 +26,16 @@
extern void paging_init(void);
#define pte_ERROR(e) \
- printk("%s:%d: bad pte %p(%016lx).\n", \
+ pr_err("%s:%d: bad pte %p(%016lx)\n", \
__FILE__, __LINE__, &(e), pte_val(e))
#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %p(%016lx).\n", \
+ pr_err("%s:%d: bad pmd %p(%016lx)\n", \
__FILE__, __LINE__, &(e), pmd_val(e))
#define pud_ERROR(e) \
- printk("%s:%d: bad pud %p(%016lx).\n", \
+ pr_err("%s:%d: bad pud %p(%016lx)\n", \
__FILE__, __LINE__, &(e), pud_val(e))
#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %p(%016lx).\n", \
+ pr_err("%s:%d: bad pgd %p(%016lx)\n", \
__FILE__, __LINE__, &(e), pgd_val(e))
struct mm_struct;
diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h
index fce3f4a..fe1ec5b 100644
--- a/arch/x86/include/asm/realmode.h
+++ b/arch/x86/include/asm/realmode.h
@@ -21,8 +21,9 @@
u32 wakeup_header;
#endif
/* APM/BIOS reboot */
-#ifdef CONFIG_X86_32
u32 machine_real_restart_asm;
+#ifdef CONFIG_X86_64
+ u32 machine_real_restart_seg;
#endif
};
diff --git a/arch/x86/include/asm/reboot.h b/arch/x86/include/asm/reboot.h
index 92f29706..a82c4f1 100644
--- a/arch/x86/include/asm/reboot.h
+++ b/arch/x86/include/asm/reboot.h
@@ -18,8 +18,8 @@
void native_machine_crash_shutdown(struct pt_regs *regs);
void native_machine_shutdown(void);
-void machine_real_restart(unsigned int type);
-/* These must match dispatch_table in reboot_32.S */
+void __noreturn machine_real_restart(unsigned int type);
+/* These must match dispatch in arch/x86/realmore/rm/reboot.S */
#define MRR_BIOS 0
#define MRR_APM 1
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index f483945..2ffa95d 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -169,11 +169,6 @@
void smp_store_cpu_info(int id);
#define cpu_physical_id(cpu) per_cpu(x86_cpu_to_apicid, cpu)
-/* We don't mark CPUs online until __cpu_up(), so we need another measure */
-static inline int num_booting_cpus(void)
-{
- return cpumask_weight(cpu_callout_mask);
-}
#else /* !CONFIG_SMP */
#define wbinvd_on_cpu(cpu) wbinvd()
static inline int wbinvd_on_all_cpus(void)
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 8e796fb..d8def8b 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -17,6 +17,8 @@
/* Handles exceptions in both to and from, but doesn't do access_ok */
__must_check unsigned long
+copy_user_enhanced_fast_string(void *to, const void *from, unsigned len);
+__must_check unsigned long
copy_user_generic_string(void *to, const void *from, unsigned len);
__must_check unsigned long
copy_user_generic_unrolled(void *to, const void *from, unsigned len);
@@ -26,9 +28,16 @@
{
unsigned ret;
- alternative_call(copy_user_generic_unrolled,
+ /*
+ * If CPU has ERMS feature, use copy_user_enhanced_fast_string.
+ * Otherwise, if CPU has rep_good feature, use copy_user_generic_string.
+ * Otherwise, use copy_user_generic_unrolled.
+ */
+ alternative_call_2(copy_user_generic_unrolled,
copy_user_generic_string,
X86_FEATURE_REP_GOOD,
+ copy_user_enhanced_fast_string,
+ X86_FEATURE_ERMS,
ASM_OUTPUT2("=a" (ret), "=D" (to), "=S" (from),
"=d" (len)),
"1" (to), "2" (from), "3" (len)
diff --git a/arch/x86/include/asm/uprobes.h b/arch/x86/include/asm/uprobes.h
index 1e9bed1..f3971bb 100644
--- a/arch/x86/include/asm/uprobes.h
+++ b/arch/x86/include/asm/uprobes.h
@@ -48,7 +48,7 @@
#endif
};
-extern int arch_uprobe_analyze_insn(struct arch_uprobe *aup, struct mm_struct *mm);
+extern int arch_uprobe_analyze_insn(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long addr);
extern int arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs);
extern int arch_uprobe_post_xol(struct arch_uprobe *aup, struct pt_regs *regs);
extern bool arch_uprobe_xol_was_trapped(struct task_struct *tsk);
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index 6149b47..a06983c 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -140,6 +140,9 @@
#define IPI_RESET_LIMIT 1
/* after this # consecutive successes, bump up the throttle if it was lowered */
#define COMPLETE_THRESHOLD 5
+/* after this # of giveups (fall back to kernel IPI's) disable the use of
+ the BAU for a period of time */
+#define GIVEUP_LIMIT 100
#define UV_LB_SUBNODEID 0x10
@@ -166,7 +169,6 @@
#define FLUSH_RETRY_TIMEOUT 2
#define FLUSH_GIVEUP 3
#define FLUSH_COMPLETE 4
-#define FLUSH_RETRY_BUSYBUG 5
/*
* tuning the action when the numalink network is extremely delayed
@@ -175,7 +177,7 @@
microseconds */
#define CONGESTED_REPS 10 /* long delays averaged over
this many broadcasts */
-#define CONGESTED_PERIOD 30 /* time for the bau to be
+#define DISABLED_PERIOD 10 /* time for the bau to be
disabled, in seconds */
/* see msg_type: */
#define MSG_NOOP 0
@@ -520,6 +522,12 @@
unsigned long s_uv2_wars; /* uv2 workaround, perm. busy */
unsigned long s_uv2_wars_hw; /* uv2 workaround, hiwater */
unsigned long s_uv2_war_waits; /* uv2 workaround, long waits */
+ unsigned long s_overipilimit; /* over the ipi reset limit */
+ unsigned long s_giveuplimit; /* disables, over giveup limit*/
+ unsigned long s_enters; /* entries to the driver */
+ unsigned long s_ipifordisabled; /* fall back to IPI; disabled */
+ unsigned long s_plugged; /* plugged by h/w bug*/
+ unsigned long s_congested; /* giveup on long wait */
/* destination statistics */
unsigned long d_alltlb; /* times all tlb's on this
cpu were flushed */
@@ -586,8 +594,8 @@
int timeout_tries;
int ipi_attempts;
int conseccompletes;
- int baudisabled;
- int set_bau_off;
+ short nobau;
+ short baudisabled;
short cpu;
short osnode;
short uvhub_cpu;
@@ -596,14 +604,16 @@
short cpus_in_socket;
short cpus_in_uvhub;
short partition_base_pnode;
- short using_desc; /* an index, like uvhub_cpu */
- unsigned int inuse_map;
+ short busy; /* all were busy (war) */
unsigned short message_number;
unsigned short uvhub_quiesce;
short socket_acknowledge_count[DEST_Q_SIZE];
cycles_t send_message;
+ cycles_t period_end;
+ cycles_t period_time;
spinlock_t uvhub_lock;
spinlock_t queue_lock;
+ spinlock_t disable_lock;
/* tunables */
int max_concurr;
int max_concurr_const;
@@ -614,9 +624,9 @@
int complete_threshold;
int cong_response_us;
int cong_reps;
- int cong_period;
- unsigned long clocks_per_100_usec;
- cycles_t period_time;
+ cycles_t disabled_period;
+ int period_giveups;
+ int giveup_limit;
long period_requests;
struct hub_and_pnode *thp;
};
diff --git a/arch/x86/include/asm/x2apic.h b/arch/x86/include/asm/x2apic.h
index 92e54ab..f90f0a5 100644
--- a/arch/x86/include/asm/x2apic.h
+++ b/arch/x86/include/asm/x2apic.h
@@ -9,15 +9,6 @@
#include <asm/ipi.h>
#include <linux/cpumask.h>
-/*
- * Need to use more than cpu 0, because we need more vectors
- * when MSI-X are used.
- */
-static const struct cpumask *x2apic_target_cpus(void)
-{
- return cpu_online_mask;
-}
-
static int x2apic_apic_id_valid(int apicid)
{
return 1;
@@ -28,15 +19,6 @@
return 1;
}
-/*
- * For now each logical cpu is in its own vector allocation domain.
- */
-static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
- cpumask_clear(retmask);
- cpumask_set_cpu(cpu, retmask);
-}
-
static void
__x2apic_send_IPI_dest(unsigned int apicid, int vector, unsigned int dest)
{
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index c090af1..38155f6 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -156,7 +156,6 @@
/**
* struct x86_platform_ops - platform specific runtime functions
* @calibrate_tsc: calibrate TSC
- * @wallclock_init: init the wallclock device
* @get_wallclock: get time from HW clock like RTC etc.
* @set_wallclock: set time back to HW clock
* @is_untracked_pat_range exclude from PAT logic
@@ -164,10 +163,10 @@
* @i8042_detect pre-detect if i8042 controller exists
* @save_sched_clock_state: save state for sched_clock() on suspend
* @restore_sched_clock_state: restore state for sched_clock() on resume
+ * @apic_post_init: adjust apic if neeeded
*/
struct x86_platform_ops {
unsigned long (*calibrate_tsc)(void);
- void (*wallclock_init)(void);
unsigned long (*get_wallclock)(void);
int (*set_wallclock)(unsigned long nowtime);
void (*iommu_shutdown)(void);
@@ -177,6 +176,7 @@
int (*i8042_detect)(void);
void (*save_sched_clock_state)(void);
void (*restore_sched_clock_state)(void);
+ void (*apic_post_init)(void);
};
struct pci_dev;
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 8afb693..b2297e5 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -422,12 +422,14 @@
return 0;
}
- if (intsrc->source_irq == 0 && intsrc->global_irq == 2) {
+ if (intsrc->source_irq == 0) {
if (acpi_skip_timer_override) {
- printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+ printk(PREFIX "BIOS IRQ0 override ignored.\n");
return 0;
}
- if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
+
+ if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity
+ && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK;
printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n");
}
@@ -1334,17 +1336,12 @@
}
/*
- * Force ignoring BIOS IRQ0 pin2 override
+ * Force ignoring BIOS IRQ0 override
*/
static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
{
- /*
- * The ati_ixp4x0_rev() early PCI quirk should have set
- * the acpi_skip_timer_override flag already:
- */
if (!acpi_skip_timer_override) {
- WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n");
- pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
+ pr_notice("%s detected: Ignoring BIOS IRQ0 override\n",
d->ident);
acpi_skip_timer_override = 1;
}
@@ -1438,7 +1435,7 @@
* is enabled. This input is incorrectly designated the
* ISA IRQ 0 via an interrupt source override even though
* it is wired to the output of the master 8259A and INTIN0
- * is not connected at all. Force ignoring BIOS IRQ0 pin2
+ * is not connected at all. Force ignoring BIOS IRQ0
* override in that cases.
*/
{
@@ -1473,6 +1470,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
},
},
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "FUJITSU SIEMENS",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+ },
+ },
{}
};
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 1f84794..931280f 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) "SMP alternatives: " fmt
+
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/mutex.h>
@@ -63,8 +65,11 @@
__setup("noreplace-paravirt", setup_noreplace_paravirt);
#endif
-#define DPRINTK(fmt, args...) if (debug_alternative) \
- printk(KERN_DEBUG fmt, args)
+#define DPRINTK(fmt, ...) \
+do { \
+ if (debug_alternative) \
+ printk(KERN_DEBUG fmt, ##__VA_ARGS__); \
+} while (0)
/*
* Each GENERIC_NOPX is of X bytes, and defined as an array of bytes
@@ -428,7 +433,7 @@
* If this still occurs then you should see a hang
* or crash shortly after this line:
*/
- printk("lockdep: fixing up alternatives.\n");
+ pr_info("lockdep: fixing up alternatives\n");
#endif
if (noreplace_smp || smp_alt_once || skip_smp_alternatives)
@@ -444,14 +449,14 @@
if (smp == smp_mode) {
/* nothing */
} else if (smp) {
- printk(KERN_INFO "SMP alternatives: switching to SMP code\n");
+ pr_info("switching to SMP code\n");
clear_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
clear_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
list_for_each_entry(mod, &smp_alt_modules, next)
alternatives_smp_lock(mod->locks, mod->locks_end,
mod->text, mod->text_end);
} else {
- printk(KERN_INFO "SMP alternatives: switching to UP code\n");
+ pr_info("switching to UP code\n");
set_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
set_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
list_for_each_entry(mod, &smp_alt_modules, next)
@@ -546,7 +551,7 @@
#ifdef CONFIG_SMP
if (smp_alt_once) {
if (1 == num_possible_cpus()) {
- printk(KERN_INFO "SMP alternatives: switching to UP code\n");
+ pr_info("switching to UP code\n");
set_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
set_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
@@ -664,7 +669,7 @@
struct text_poke_param *p;
int i;
- if (atomic_dec_and_test(&stop_machine_first)) {
+ if (atomic_xchg(&stop_machine_first, 0)) {
for (i = 0; i < tpp->nparams; i++) {
p = &tpp->params[i];
text_poke(p->addr, p->opcode, p->len);
diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
index be16854..aadf335 100644
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -2,6 +2,9 @@
* Shared support code for AMD K8 northbridges and derivates.
* Copyright 2006 Andi Kleen, SUSE Labs. Subject to GPLv2.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/init.h>
@@ -16,6 +19,7 @@
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
{}
};
EXPORT_SYMBOL(amd_nb_misc_ids);
@@ -258,7 +262,7 @@
}
spin_unlock_irqrestore(&gart_lock, flags);
if (!flushed)
- printk("nothing to flush?\n");
+ pr_notice("nothing to flush?\n");
}
EXPORT_SYMBOL_GPL(amd_flush_garts);
@@ -269,11 +273,10 @@
err = amd_cache_northbridges();
if (err < 0)
- printk(KERN_NOTICE "AMD NB: Cannot enumerate AMD northbridges.\n");
+ pr_notice("Cannot enumerate AMD northbridges\n");
if (amd_cache_gart() < 0)
- printk(KERN_NOTICE "AMD NB: Cannot initialize GART flush words, "
- "GART support disabled.\n");
+ pr_notice("Cannot initialize GART flush words, GART support disabled\n");
return err;
}
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 39a222e..c421512 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2123,6 +2123,25 @@
apic_write(APIC_LDR, val);
}
+int default_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+ const struct cpumask *andmask,
+ unsigned int *apicid)
+{
+ unsigned int cpu;
+
+ for_each_cpu_and(cpu, cpumask, andmask) {
+ if (cpumask_test_cpu(cpu, cpu_online_mask))
+ break;
+ }
+
+ if (likely(cpu < nr_cpu_ids)) {
+ *apicid = per_cpu(x86_cpu_to_apicid, cpu);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
/*
* Power management
*/
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index 0e881c4..00c77cf 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -36,25 +36,6 @@
return 1;
}
-static const struct cpumask *flat_target_cpus(void)
-{
- return cpu_online_mask;
-}
-
-static void flat_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
- /* Careful. Some cpus do not strictly honor the set of cpus
- * specified in the interrupt destination when using lowest
- * priority interrupt delivery mode.
- *
- * In particular there was a hyperthreading cpu observed to
- * deliver interrupts to the wrong hyperthread when only one
- * hyperthread was specified in the interrupt desitination.
- */
- cpumask_clear(retmask);
- cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
-}
-
/*
* Set up the logical destination ID.
*
@@ -92,7 +73,7 @@
}
static void
- flat_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector)
+flat_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector)
{
unsigned long mask = cpumask_bits(cpumask)[0];
int cpu = smp_processor_id();
@@ -186,7 +167,7 @@
.irq_delivery_mode = dest_LowestPrio,
.irq_dest_mode = 1, /* logical */
- .target_cpus = flat_target_cpus,
+ .target_cpus = online_target_cpus,
.disable_esr = 0,
.dest_logical = APIC_DEST_LOGICAL,
.check_apicid_used = NULL,
@@ -210,8 +191,7 @@
.set_apic_id = set_apic_id,
.apic_id_mask = 0xFFu << 24,
- .cpu_mask_to_apicid = default_cpu_mask_to_apicid,
- .cpu_mask_to_apicid_and = default_cpu_mask_to_apicid_and,
+ .cpu_mask_to_apicid_and = flat_cpu_mask_to_apicid_and,
.send_IPI_mask = flat_send_IPI_mask,
.send_IPI_mask_allbutself = flat_send_IPI_mask_allbutself,
@@ -262,17 +242,6 @@
return 0;
}
-static const struct cpumask *physflat_target_cpus(void)
-{
- return cpu_online_mask;
-}
-
-static void physflat_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
- cpumask_clear(retmask);
- cpumask_set_cpu(cpu, retmask);
-}
-
static void physflat_send_IPI_mask(const struct cpumask *cpumask, int vector)
{
default_send_IPI_mask_sequence_phys(cpumask, vector);
@@ -294,38 +263,6 @@
physflat_send_IPI_mask(cpu_online_mask, vector);
}
-static unsigned int physflat_cpu_mask_to_apicid(const struct cpumask *cpumask)
-{
- int cpu;
-
- /*
- * We're using fixed IRQ delivery, can only return one phys APIC ID.
- * May as well be the first.
- */
- cpu = cpumask_first(cpumask);
- if ((unsigned)cpu < nr_cpu_ids)
- return per_cpu(x86_cpu_to_apicid, cpu);
- else
- return BAD_APICID;
-}
-
-static unsigned int
-physflat_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
- const struct cpumask *andmask)
-{
- int cpu;
-
- /*
- * We're using fixed IRQ delivery, can only return one phys APIC ID.
- * May as well be the first.
- */
- for_each_cpu_and(cpu, cpumask, andmask) {
- if (cpumask_test_cpu(cpu, cpu_online_mask))
- break;
- }
- return per_cpu(x86_cpu_to_apicid, cpu);
-}
-
static int physflat_probe(void)
{
if (apic == &apic_physflat || num_possible_cpus() > 8)
@@ -345,13 +282,13 @@
.irq_delivery_mode = dest_Fixed,
.irq_dest_mode = 0, /* physical */
- .target_cpus = physflat_target_cpus,
+ .target_cpus = online_target_cpus,
.disable_esr = 0,
.dest_logical = 0,
.check_apicid_used = NULL,
.check_apicid_present = NULL,
- .vector_allocation_domain = physflat_vector_allocation_domain,
+ .vector_allocation_domain = default_vector_allocation_domain,
/* not needed, but shouldn't hurt: */
.init_apic_ldr = flat_init_apic_ldr,
@@ -370,8 +307,7 @@
.set_apic_id = set_apic_id,
.apic_id_mask = 0xFFu << 24,
- .cpu_mask_to_apicid = physflat_cpu_mask_to_apicid,
- .cpu_mask_to_apicid_and = physflat_cpu_mask_to_apicid_and,
+ .cpu_mask_to_apicid_and = default_cpu_mask_to_apicid_and,
.send_IPI_mask = physflat_send_IPI_mask,
.send_IPI_mask_allbutself = physflat_send_IPI_mask_allbutself,
diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c
index a6e4c6e..e145f28 100644
--- a/arch/x86/kernel/apic/apic_noop.c
+++ b/arch/x86/kernel/apic/apic_noop.c
@@ -100,12 +100,12 @@
return physid_isset(bit, phys_cpu_present_map);
}
-static void noop_vector_allocation_domain(int cpu, struct cpumask *retmask)
+static void noop_vector_allocation_domain(int cpu, struct cpumask *retmask,
+ const struct cpumask *mask)
{
if (cpu != 0)
pr_warning("APIC: Vector allocated for non-BSP cpu\n");
- cpumask_clear(retmask);
- cpumask_set_cpu(cpu, retmask);
+ cpumask_copy(retmask, cpumask_of(cpu));
}
static u32 noop_apic_read(u32 reg)
@@ -159,8 +159,7 @@
.set_apic_id = NULL,
.apic_id_mask = 0x0F << 24,
- .cpu_mask_to_apicid = default_cpu_mask_to_apicid,
- .cpu_mask_to_apicid_and = default_cpu_mask_to_apicid_and,
+ .cpu_mask_to_apicid_and = flat_cpu_mask_to_apicid_and,
.send_IPI_mask = noop_send_IPI_mask,
.send_IPI_mask_allbutself = noop_send_IPI_mask_allbutself,
diff --git a/arch/x86/kernel/apic/apic_numachip.c b/arch/x86/kernel/apic/apic_numachip.c
index 6ec6d5d..bc552cf 100644
--- a/arch/x86/kernel/apic/apic_numachip.c
+++ b/arch/x86/kernel/apic/apic_numachip.c
@@ -72,17 +72,6 @@
return initial_apic_id >> index_msb;
}
-static const struct cpumask *numachip_target_cpus(void)
-{
- return cpu_online_mask;
-}
-
-static void numachip_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
- cpumask_clear(retmask);
- cpumask_set_cpu(cpu, retmask);
-}
-
static int __cpuinit numachip_wakeup_secondary(int phys_apicid, unsigned long start_rip)
{
union numachip_csr_g3_ext_irq_gen int_gen;
@@ -157,38 +146,6 @@
__default_send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
}
-static unsigned int numachip_cpu_mask_to_apicid(const struct cpumask *cpumask)
-{
- int cpu;
-
- /*
- * We're using fixed IRQ delivery, can only return one phys APIC ID.
- * May as well be the first.
- */
- cpu = cpumask_first(cpumask);
- if (likely((unsigned)cpu < nr_cpu_ids))
- return per_cpu(x86_cpu_to_apicid, cpu);
-
- return BAD_APICID;
-}
-
-static unsigned int
-numachip_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
- const struct cpumask *andmask)
-{
- int cpu;
-
- /*
- * We're using fixed IRQ delivery, can only return one phys APIC ID.
- * May as well be the first.
- */
- for_each_cpu_and(cpu, cpumask, andmask) {
- if (cpumask_test_cpu(cpu, cpu_online_mask))
- break;
- }
- return per_cpu(x86_cpu_to_apicid, cpu);
-}
-
static int __init numachip_probe(void)
{
return apic == &apic_numachip;
@@ -253,13 +210,13 @@
.irq_delivery_mode = dest_Fixed,
.irq_dest_mode = 0, /* physical */
- .target_cpus = numachip_target_cpus,
+ .target_cpus = online_target_cpus,
.disable_esr = 0,
.dest_logical = 0,
.check_apicid_used = NULL,
.check_apicid_present = NULL,
- .vector_allocation_domain = numachip_vector_allocation_domain,
+ .vector_allocation_domain = default_vector_allocation_domain,
.init_apic_ldr = flat_init_apic_ldr,
.ioapic_phys_id_map = NULL,
@@ -277,8 +234,7 @@
.set_apic_id = set_apic_id,
.apic_id_mask = 0xffU << 24,
- .cpu_mask_to_apicid = numachip_cpu_mask_to_apicid,
- .cpu_mask_to_apicid_and = numachip_cpu_mask_to_apicid_and,
+ .cpu_mask_to_apicid_and = default_cpu_mask_to_apicid_and,
.send_IPI_mask = numachip_send_IPI_mask,
.send_IPI_mask_allbutself = numachip_send_IPI_mask_allbutself,
diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index 31fbdbf..d50e364 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -26,15 +26,6 @@
return 1;
}
-static const struct cpumask *bigsmp_target_cpus(void)
-{
-#ifdef CONFIG_SMP
- return cpu_online_mask;
-#else
- return cpumask_of(0);
-#endif
-}
-
static unsigned long bigsmp_check_apicid_used(physid_mask_t *map, int apicid)
{
return 0;
@@ -105,32 +96,6 @@
return 1;
}
-/* As we are using single CPU as destination, pick only one CPU here */
-static unsigned int bigsmp_cpu_mask_to_apicid(const struct cpumask *cpumask)
-{
- int cpu = cpumask_first(cpumask);
-
- if (cpu < nr_cpu_ids)
- return cpu_physical_id(cpu);
- return BAD_APICID;
-}
-
-static unsigned int bigsmp_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
- const struct cpumask *andmask)
-{
- int cpu;
-
- /*
- * We're using fixed IRQ delivery, can only return one phys APIC ID.
- * May as well be the first.
- */
- for_each_cpu_and(cpu, cpumask, andmask) {
- if (cpumask_test_cpu(cpu, cpu_online_mask))
- return cpu_physical_id(cpu);
- }
- return BAD_APICID;
-}
-
static int bigsmp_phys_pkg_id(int cpuid_apic, int index_msb)
{
return cpuid_apic >> index_msb;
@@ -177,12 +142,6 @@
{ } /* NULL entry stops DMI scanning */
};
-static void bigsmp_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
- cpumask_clear(retmask);
- cpumask_set_cpu(cpu, retmask);
-}
-
static int probe_bigsmp(void)
{
if (def_to_bigsmp)
@@ -205,13 +164,13 @@
/* phys delivery to target CPU: */
.irq_dest_mode = 0,
- .target_cpus = bigsmp_target_cpus,
+ .target_cpus = default_target_cpus,
.disable_esr = 1,
.dest_logical = 0,
.check_apicid_used = bigsmp_check_apicid_used,
.check_apicid_present = bigsmp_check_apicid_present,
- .vector_allocation_domain = bigsmp_vector_allocation_domain,
+ .vector_allocation_domain = default_vector_allocation_domain,
.init_apic_ldr = bigsmp_init_apic_ldr,
.ioapic_phys_id_map = bigsmp_ioapic_phys_id_map,
@@ -229,8 +188,7 @@
.set_apic_id = NULL,
.apic_id_mask = 0xFF << 24,
- .cpu_mask_to_apicid = bigsmp_cpu_mask_to_apicid,
- .cpu_mask_to_apicid_and = bigsmp_cpu_mask_to_apicid_and,
+ .cpu_mask_to_apicid_and = default_cpu_mask_to_apicid_and,
.send_IPI_mask = bigsmp_send_IPI_mask,
.send_IPI_mask_allbutself = NULL,
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index db4ab1b..0874799 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -394,21 +394,6 @@
WARN(1, "Command failed, status = %x\n", mip_status);
}
-static void es7000_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
- /* Careful. Some cpus do not strictly honor the set of cpus
- * specified in the interrupt destination when using lowest
- * priority interrupt delivery mode.
- *
- * In particular there was a hyperthreading cpu observed to
- * deliver interrupts to the wrong hyperthread when only one
- * hyperthread was specified in the interrupt desitination.
- */
- cpumask_clear(retmask);
- cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
-}
-
-
static void es7000_wait_for_init_deassert(atomic_t *deassert)
{
while (!atomic_read(deassert))
@@ -540,45 +525,49 @@
return 1;
}
-static unsigned int es7000_cpu_mask_to_apicid(const struct cpumask *cpumask)
+static inline int
+es7000_cpu_mask_to_apicid(const struct cpumask *cpumask, unsigned int *dest_id)
{
unsigned int round = 0;
- int cpu, uninitialized_var(apicid);
+ unsigned int cpu, uninitialized_var(apicid);
/*
* The cpus in the mask must all be on the apic cluster.
*/
- for_each_cpu(cpu, cpumask) {
+ for_each_cpu_and(cpu, cpumask, cpu_online_mask) {
int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
WARN(1, "Not a valid mask!");
- return BAD_APICID;
+ return -EINVAL;
}
- apicid = new_apicid;
+ apicid |= new_apicid;
round++;
}
- return apicid;
+ if (!round)
+ return -EINVAL;
+ *dest_id = apicid;
+ return 0;
}
-static unsigned int
+static int
es7000_cpu_mask_to_apicid_and(const struct cpumask *inmask,
- const struct cpumask *andmask)
+ const struct cpumask *andmask,
+ unsigned int *apicid)
{
- int apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0);
cpumask_var_t cpumask;
+ *apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0);
if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
- return apicid;
+ return 0;
cpumask_and(cpumask, inmask, andmask);
- cpumask_and(cpumask, cpumask, cpu_online_mask);
- apicid = es7000_cpu_mask_to_apicid(cpumask);
+ es7000_cpu_mask_to_apicid(cpumask, apicid);
free_cpumask_var(cpumask);
- return apicid;
+ return 0;
}
static int es7000_phys_pkg_id(int cpuid_apic, int index_msb)
@@ -638,7 +627,7 @@
.check_apicid_used = es7000_check_apicid_used,
.check_apicid_present = es7000_check_apicid_present,
- .vector_allocation_domain = es7000_vector_allocation_domain,
+ .vector_allocation_domain = flat_vector_allocation_domain,
.init_apic_ldr = es7000_init_apic_ldr_cluster,
.ioapic_phys_id_map = es7000_ioapic_phys_id_map,
@@ -656,7 +645,6 @@
.set_apic_id = NULL,
.apic_id_mask = 0xFF << 24,
- .cpu_mask_to_apicid = es7000_cpu_mask_to_apicid,
.cpu_mask_to_apicid_and = es7000_cpu_mask_to_apicid_and,
.send_IPI_mask = es7000_send_IPI_mask,
@@ -705,7 +693,7 @@
.check_apicid_used = es7000_check_apicid_used,
.check_apicid_present = es7000_check_apicid_present,
- .vector_allocation_domain = es7000_vector_allocation_domain,
+ .vector_allocation_domain = flat_vector_allocation_domain,
.init_apic_ldr = es7000_init_apic_ldr,
.ioapic_phys_id_map = es7000_ioapic_phys_id_map,
@@ -723,7 +711,6 @@
.set_apic_id = NULL,
.apic_id_mask = 0xFF << 24,
- .cpu_mask_to_apicid = es7000_cpu_mask_to_apicid,
.cpu_mask_to_apicid_and = es7000_cpu_mask_to_apicid_and,
.send_IPI_mask = es7000_send_IPI_mask,
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 5f0ff59..406eee7 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -448,8 +448,8 @@
entry = alloc_irq_pin_list(node);
if (!entry) {
- printk(KERN_ERR "can not alloc irq_pin_list (%d,%d,%d)\n",
- node, apic, pin);
+ pr_err("can not alloc irq_pin_list (%d,%d,%d)\n",
+ node, apic, pin);
return -ENOMEM;
}
entry->apic = apic;
@@ -661,7 +661,7 @@
ioapic_mask_entry(apic, pin);
entry = ioapic_read_entry(apic, pin);
if (entry.irr)
- printk(KERN_ERR "Unable to reset IRR for apic: %d, pin :%d\n",
+ pr_err("Unable to reset IRR for apic: %d, pin :%d\n",
mpc_ioapic_id(apic), pin);
}
@@ -895,7 +895,7 @@
}
case 2: /* reserved */
{
- printk(KERN_WARNING "broken BIOS!!\n");
+ pr_warn("broken BIOS!!\n");
polarity = 1;
break;
}
@@ -906,7 +906,7 @@
}
default: /* invalid */
{
- printk(KERN_WARNING "broken BIOS!!\n");
+ pr_warn("broken BIOS!!\n");
polarity = 1;
break;
}
@@ -948,7 +948,7 @@
}
default:
{
- printk(KERN_WARNING "broken BIOS!!\n");
+ pr_warn("broken BIOS!!\n");
trigger = 1;
break;
}
@@ -962,7 +962,7 @@
}
case 2: /* reserved */
{
- printk(KERN_WARNING "broken BIOS!!\n");
+ pr_warn("broken BIOS!!\n");
trigger = 1;
break;
}
@@ -973,7 +973,7 @@
}
default: /* invalid */
{
- printk(KERN_WARNING "broken BIOS!!\n");
+ pr_warn("broken BIOS!!\n");
trigger = 0;
break;
}
@@ -991,7 +991,7 @@
* Debugging check, we are in big trouble if this message pops up!
*/
if (mp_irqs[idx].dstirq != pin)
- printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
+ pr_err("broken BIOS or MPTABLE parser, ayiee!!\n");
if (test_bit(bus, mp_bus_not_pci)) {
irq = mp_irqs[idx].srcbusirq;
@@ -1112,8 +1112,7 @@
* 0x80, because int 0x80 is hm, kind of importantish. ;)
*/
static int current_vector = FIRST_EXTERNAL_VECTOR + VECTOR_OFFSET_START;
- static int current_offset = VECTOR_OFFSET_START % 8;
- unsigned int old_vector;
+ static int current_offset = VECTOR_OFFSET_START % 16;
int cpu, err;
cpumask_var_t tmp_mask;
@@ -1123,35 +1122,45 @@
if (!alloc_cpumask_var(&tmp_mask, GFP_ATOMIC))
return -ENOMEM;
- old_vector = cfg->vector;
- if (old_vector) {
- cpumask_and(tmp_mask, mask, cpu_online_mask);
- cpumask_and(tmp_mask, cfg->domain, tmp_mask);
- if (!cpumask_empty(tmp_mask)) {
- free_cpumask_var(tmp_mask);
- return 0;
- }
- }
-
/* Only try and allocate irqs on cpus that are present */
err = -ENOSPC;
- for_each_cpu_and(cpu, mask, cpu_online_mask) {
- int new_cpu;
- int vector, offset;
+ cpumask_clear(cfg->old_domain);
+ cpu = cpumask_first_and(mask, cpu_online_mask);
+ while (cpu < nr_cpu_ids) {
+ int new_cpu, vector, offset;
- apic->vector_allocation_domain(cpu, tmp_mask);
+ apic->vector_allocation_domain(cpu, tmp_mask, mask);
+
+ if (cpumask_subset(tmp_mask, cfg->domain)) {
+ err = 0;
+ if (cpumask_equal(tmp_mask, cfg->domain))
+ break;
+ /*
+ * New cpumask using the vector is a proper subset of
+ * the current in use mask. So cleanup the vector
+ * allocation for the members that are not used anymore.
+ */
+ cpumask_andnot(cfg->old_domain, cfg->domain, tmp_mask);
+ cfg->move_in_progress = 1;
+ cpumask_and(cfg->domain, cfg->domain, tmp_mask);
+ break;
+ }
vector = current_vector;
offset = current_offset;
next:
- vector += 8;
+ vector += 16;
if (vector >= first_system_vector) {
- /* If out of vectors on large boxen, must share them. */
- offset = (offset + 1) % 8;
+ offset = (offset + 1) % 16;
vector = FIRST_EXTERNAL_VECTOR + offset;
}
- if (unlikely(current_vector == vector))
+
+ if (unlikely(current_vector == vector)) {
+ cpumask_or(cfg->old_domain, cfg->old_domain, tmp_mask);
+ cpumask_andnot(tmp_mask, mask, cfg->old_domain);
+ cpu = cpumask_first_and(tmp_mask, cpu_online_mask);
continue;
+ }
if (test_bit(vector, used_vectors))
goto next;
@@ -1162,7 +1171,7 @@
/* Found one! */
current_vector = vector;
current_offset = offset;
- if (old_vector) {
+ if (cfg->vector) {
cfg->move_in_progress = 1;
cpumask_copy(cfg->old_domain, cfg->domain);
}
@@ -1346,18 +1355,18 @@
if (!IO_APIC_IRQ(irq))
return;
- /*
- * For legacy irqs, cfg->domain starts with cpu 0 for legacy
- * controllers like 8259. Now that IO-APIC can handle this irq, update
- * the cfg->domain.
- */
- if (irq < legacy_pic->nr_legacy_irqs && cpumask_test_cpu(0, cfg->domain))
- apic->vector_allocation_domain(0, cfg->domain);
if (assign_irq_vector(irq, cfg, apic->target_cpus()))
return;
- dest = apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());
+ if (apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus(),
+ &dest)) {
+ pr_warn("Failed to obtain apicid for ioapic %d, pin %d\n",
+ mpc_ioapic_id(attr->ioapic), attr->ioapic_pin);
+ __clear_irq_vector(irq, cfg);
+
+ return;
+ }
apic_printk(APIC_VERBOSE,KERN_DEBUG
"IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
@@ -1366,7 +1375,7 @@
cfg->vector, irq, attr->trigger, attr->polarity, dest);
if (setup_ioapic_entry(irq, &entry, dest, cfg->vector, attr)) {
- pr_warn("Failed to setup ioapic entry for ioapic %d, pin %d\n",
+ pr_warn("Failed to setup ioapic entry for ioapic %d, pin %d\n",
mpc_ioapic_id(attr->ioapic), attr->ioapic_pin);
__clear_irq_vector(irq, cfg);
@@ -1469,9 +1478,10 @@
* Set up the timer pin, possibly with the 8259A-master behind.
*/
static void __init setup_timer_IRQ0_pin(unsigned int ioapic_idx,
- unsigned int pin, int vector)
+ unsigned int pin, int vector)
{
struct IO_APIC_route_entry entry;
+ unsigned int dest;
if (irq_remapping_enabled)
return;
@@ -1482,9 +1492,13 @@
* We use logical delivery to get the timer IRQ
* to the first CPU.
*/
+ if (unlikely(apic->cpu_mask_to_apicid_and(apic->target_cpus(),
+ apic->target_cpus(), &dest)))
+ dest = BAD_APICID;
+
entry.dest_mode = apic->irq_dest_mode;
entry.mask = 0; /* don't mask IRQ for edge */
- entry.dest = apic->cpu_mask_to_apicid(apic->target_cpus());
+ entry.dest = dest;
entry.delivery_mode = apic->irq_delivery_mode;
entry.polarity = 0;
entry.trigger = 0;
@@ -1521,7 +1535,6 @@
reg_03.raw = io_apic_read(ioapic_idx, 3);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
- printk("\n");
printk(KERN_DEBUG "IO APIC #%d......\n", mpc_ioapic_id(ioapic_idx));
printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID);
@@ -1578,7 +1591,7 @@
i,
ir_entry->index
);
- printk("%1d %1d %1d %1d %1d "
+ pr_cont("%1d %1d %1d %1d %1d "
"%1d %1d %X %02X\n",
ir_entry->format,
ir_entry->mask,
@@ -1598,7 +1611,7 @@
i,
entry.dest
);
- printk("%1d %1d %1d %1d %1d "
+ pr_cont("%1d %1d %1d %1d %1d "
"%1d %1d %02X\n",
entry.mask,
entry.trigger,
@@ -1651,8 +1664,8 @@
continue;
printk(KERN_DEBUG "IRQ%d ", irq);
for_each_irq_pin(entry, cfg->irq_2_pin)
- printk("-> %d:%d", entry->apic, entry->pin);
- printk("\n");
+ pr_cont("-> %d:%d", entry->apic, entry->pin);
+ pr_cont("\n");
}
printk(KERN_INFO ".................................... done.\n");
@@ -1665,9 +1678,9 @@
printk(KERN_DEBUG);
for (i = 0; i < 8; i++)
- printk(KERN_CONT "%08x", apic_read(base + i*0x10));
+ pr_cont("%08x", apic_read(base + i*0x10));
- printk(KERN_CONT "\n");
+ pr_cont("\n");
}
__apicdebuginit(void) print_local_APIC(void *dummy)
@@ -1769,7 +1782,7 @@
printk(KERN_DEBUG "... APIC EILVT%d: %08x\n", i, v);
}
}
- printk("\n");
+ pr_cont("\n");
}
__apicdebuginit(void) print_local_APICs(int maxcpu)
@@ -2065,7 +2078,7 @@
reg_00.raw = io_apic_read(ioapic_idx, 0);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx))
- printk("could not set ID!\n");
+ pr_cont("could not set ID!\n");
else
apic_printk(APIC_VERBOSE, " ok.\n");
}
@@ -2210,71 +2223,6 @@
cfg->move_in_progress = 0;
}
-static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg)
-{
- int apic, pin;
- struct irq_pin_list *entry;
- u8 vector = cfg->vector;
-
- for_each_irq_pin(entry, cfg->irq_2_pin) {
- unsigned int reg;
-
- apic = entry->apic;
- pin = entry->pin;
- /*
- * With interrupt-remapping, destination information comes
- * from interrupt-remapping table entry.
- */
- if (!irq_remapped(cfg))
- io_apic_write(apic, 0x11 + pin*2, dest);
- reg = io_apic_read(apic, 0x10 + pin*2);
- reg &= ~IO_APIC_REDIR_VECTOR_MASK;
- reg |= vector;
- io_apic_modify(apic, 0x10 + pin*2, reg);
- }
-}
-
-/*
- * Either sets data->affinity to a valid value, and returns
- * ->cpu_mask_to_apicid of that in dest_id, or returns -1 and
- * leaves data->affinity untouched.
- */
-int __ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
- unsigned int *dest_id)
-{
- struct irq_cfg *cfg = data->chip_data;
-
- if (!cpumask_intersects(mask, cpu_online_mask))
- return -1;
-
- if (assign_irq_vector(data->irq, data->chip_data, mask))
- return -1;
-
- cpumask_copy(data->affinity, mask);
-
- *dest_id = apic->cpu_mask_to_apicid_and(mask, cfg->domain);
- return 0;
-}
-
-static int
-ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
- bool force)
-{
- unsigned int dest, irq = data->irq;
- unsigned long flags;
- int ret;
-
- raw_spin_lock_irqsave(&ioapic_lock, flags);
- ret = __ioapic_set_affinity(data, mask, &dest);
- if (!ret) {
- /* Only the high 8 bits are valid. */
- dest = SET_APIC_LOGICAL_ID(dest);
- __target_IO_APIC_irq(irq, dest, data->chip_data);
- }
- raw_spin_unlock_irqrestore(&ioapic_lock, flags);
- return ret;
-}
-
asmlinkage void smp_irq_move_cleanup_interrupt(void)
{
unsigned vector, me;
@@ -2362,6 +2310,87 @@
static inline void irq_complete_move(struct irq_cfg *cfg) { }
#endif
+static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg)
+{
+ int apic, pin;
+ struct irq_pin_list *entry;
+ u8 vector = cfg->vector;
+
+ for_each_irq_pin(entry, cfg->irq_2_pin) {
+ unsigned int reg;
+
+ apic = entry->apic;
+ pin = entry->pin;
+ /*
+ * With interrupt-remapping, destination information comes
+ * from interrupt-remapping table entry.
+ */
+ if (!irq_remapped(cfg))
+ io_apic_write(apic, 0x11 + pin*2, dest);
+ reg = io_apic_read(apic, 0x10 + pin*2);
+ reg &= ~IO_APIC_REDIR_VECTOR_MASK;
+ reg |= vector;
+ io_apic_modify(apic, 0x10 + pin*2, reg);
+ }
+}
+
+/*
+ * Either sets data->affinity to a valid value, and returns
+ * ->cpu_mask_to_apicid of that in dest_id, or returns -1 and
+ * leaves data->affinity untouched.
+ */
+int __ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
+ unsigned int *dest_id)
+{
+ struct irq_cfg *cfg = data->chip_data;
+ unsigned int irq = data->irq;
+ int err;
+
+ if (!config_enabled(CONFIG_SMP))
+ return -1;
+
+ if (!cpumask_intersects(mask, cpu_online_mask))
+ return -EINVAL;
+
+ err = assign_irq_vector(irq, cfg, mask);
+ if (err)
+ return err;
+
+ err = apic->cpu_mask_to_apicid_and(mask, cfg->domain, dest_id);
+ if (err) {
+ if (assign_irq_vector(irq, cfg, data->affinity))
+ pr_err("Failed to recover vector for irq %d\n", irq);
+ return err;
+ }
+
+ cpumask_copy(data->affinity, mask);
+
+ return 0;
+}
+
+static int
+ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
+ bool force)
+{
+ unsigned int dest, irq = data->irq;
+ unsigned long flags;
+ int ret;
+
+ if (!config_enabled(CONFIG_SMP))
+ return -1;
+
+ raw_spin_lock_irqsave(&ioapic_lock, flags);
+ ret = __ioapic_set_affinity(data, mask, &dest);
+ if (!ret) {
+ /* Only the high 8 bits are valid. */
+ dest = SET_APIC_LOGICAL_ID(dest);
+ __target_IO_APIC_irq(irq, dest, data->chip_data);
+ ret = IRQ_SET_MASK_OK_NOCOPY;
+ }
+ raw_spin_unlock_irqrestore(&ioapic_lock, flags);
+ return ret;
+}
+
static void ack_apic_edge(struct irq_data *data)
{
irq_complete_move(data->chip_data);
@@ -2541,9 +2570,7 @@
chip->irq_ack = ir_ack_apic_edge;
chip->irq_eoi = ir_ack_apic_level;
-#ifdef CONFIG_SMP
chip->irq_set_affinity = set_remapped_irq_affinity;
-#endif
}
#endif /* CONFIG_IRQ_REMAP */
@@ -2554,9 +2581,7 @@
.irq_unmask = unmask_ioapic_irq,
.irq_ack = ack_apic_edge,
.irq_eoi = ack_apic_level,
-#ifdef CONFIG_SMP
.irq_set_affinity = ioapic_set_affinity,
-#endif
.irq_retrigger = ioapic_retrigger_irq,
};
@@ -3038,7 +3063,10 @@
if (err)
return err;
- dest = apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());
+ err = apic->cpu_mask_to_apicid_and(cfg->domain,
+ apic->target_cpus(), &dest);
+ if (err)
+ return err;
if (irq_remapped(cfg)) {
compose_remapped_msi_msg(pdev, irq, dest, msg, hpet_id);
@@ -3072,7 +3100,6 @@
return err;
}
-#ifdef CONFIG_SMP
static int
msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
{
@@ -3092,9 +3119,8 @@
__write_msi_msg(data->msi_desc, &msg);
- return 0;
+ return IRQ_SET_MASK_OK_NOCOPY;
}
-#endif /* CONFIG_SMP */
/*
* IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
@@ -3105,9 +3131,7 @@
.irq_unmask = unmask_msi_irq,
.irq_mask = mask_msi_irq,
.irq_ack = ack_apic_edge,
-#ifdef CONFIG_SMP
.irq_set_affinity = msi_set_affinity,
-#endif
.irq_retrigger = ioapic_retrigger_irq,
};
@@ -3192,7 +3216,6 @@
}
#ifdef CONFIG_DMAR_TABLE
-#ifdef CONFIG_SMP
static int
dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask,
bool force)
@@ -3214,19 +3237,15 @@
dmar_msi_write(irq, &msg);
- return 0;
+ return IRQ_SET_MASK_OK_NOCOPY;
}
-#endif /* CONFIG_SMP */
-
static struct irq_chip dmar_msi_type = {
.name = "DMAR_MSI",
.irq_unmask = dmar_msi_unmask,
.irq_mask = dmar_msi_mask,
.irq_ack = ack_apic_edge,
-#ifdef CONFIG_SMP
.irq_set_affinity = dmar_msi_set_affinity,
-#endif
.irq_retrigger = ioapic_retrigger_irq,
};
@@ -3247,7 +3266,6 @@
#ifdef CONFIG_HPET_TIMER
-#ifdef CONFIG_SMP
static int hpet_msi_set_affinity(struct irq_data *data,
const struct cpumask *mask, bool force)
{
@@ -3267,19 +3285,15 @@
hpet_msi_write(data->handler_data, &msg);
- return 0;
+ return IRQ_SET_MASK_OK_NOCOPY;
}
-#endif /* CONFIG_SMP */
-
static struct irq_chip hpet_msi_type = {
.name = "HPET_MSI",
.irq_unmask = hpet_msi_unmask,
.irq_mask = hpet_msi_mask,
.irq_ack = ack_apic_edge,
-#ifdef CONFIG_SMP
.irq_set_affinity = hpet_msi_set_affinity,
-#endif
.irq_retrigger = ioapic_retrigger_irq,
};
@@ -3314,8 +3328,6 @@
*/
#ifdef CONFIG_HT_IRQ
-#ifdef CONFIG_SMP
-
static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
{
struct ht_irq_msg msg;
@@ -3340,25 +3352,23 @@
return -1;
target_ht_irq(data->irq, dest, cfg->vector);
- return 0;
+ return IRQ_SET_MASK_OK_NOCOPY;
}
-#endif
-
static struct irq_chip ht_irq_chip = {
.name = "PCI-HT",
.irq_mask = mask_ht_irq,
.irq_unmask = unmask_ht_irq,
.irq_ack = ack_apic_edge,
-#ifdef CONFIG_SMP
.irq_set_affinity = ht_set_affinity,
-#endif
.irq_retrigger = ioapic_retrigger_irq,
};
int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
{
struct irq_cfg *cfg;
+ struct ht_irq_msg msg;
+ unsigned dest;
int err;
if (disable_apic)
@@ -3366,36 +3376,37 @@
cfg = irq_cfg(irq);
err = assign_irq_vector(irq, cfg, apic->target_cpus());
- if (!err) {
- struct ht_irq_msg msg;
- unsigned dest;
+ if (err)
+ return err;
- dest = apic->cpu_mask_to_apicid_and(cfg->domain,
- apic->target_cpus());
+ err = apic->cpu_mask_to_apicid_and(cfg->domain,
+ apic->target_cpus(), &dest);
+ if (err)
+ return err;
- msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
+ msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
- msg.address_lo =
- HT_IRQ_LOW_BASE |
- HT_IRQ_LOW_DEST_ID(dest) |
- HT_IRQ_LOW_VECTOR(cfg->vector) |
- ((apic->irq_dest_mode == 0) ?
- HT_IRQ_LOW_DM_PHYSICAL :
- HT_IRQ_LOW_DM_LOGICAL) |
- HT_IRQ_LOW_RQEOI_EDGE |
- ((apic->irq_delivery_mode != dest_LowestPrio) ?
- HT_IRQ_LOW_MT_FIXED :
- HT_IRQ_LOW_MT_ARBITRATED) |
- HT_IRQ_LOW_IRQ_MASKED;
+ msg.address_lo =
+ HT_IRQ_LOW_BASE |
+ HT_IRQ_LOW_DEST_ID(dest) |
+ HT_IRQ_LOW_VECTOR(cfg->vector) |
+ ((apic->irq_dest_mode == 0) ?
+ HT_IRQ_LOW_DM_PHYSICAL :
+ HT_IRQ_LOW_DM_LOGICAL) |
+ HT_IRQ_LOW_RQEOI_EDGE |
+ ((apic->irq_delivery_mode != dest_LowestPrio) ?
+ HT_IRQ_LOW_MT_FIXED :
+ HT_IRQ_LOW_MT_ARBITRATED) |
+ HT_IRQ_LOW_IRQ_MASKED;
- write_ht_irq_msg(irq, &msg);
+ write_ht_irq_msg(irq, &msg);
- irq_set_chip_and_handler_name(irq, &ht_irq_chip,
- handle_edge_irq, "edge");
+ irq_set_chip_and_handler_name(irq, &ht_irq_chip,
+ handle_edge_irq, "edge");
- dev_printk(KERN_DEBUG, &dev->dev, "irq %d for HT\n", irq);
- }
- return err;
+ dev_printk(KERN_DEBUG, &dev->dev, "irq %d for HT\n", irq);
+
+ return 0;
}
#endif /* CONFIG_HT_IRQ */
@@ -3563,7 +3574,8 @@
/* Sanity check */
if (reg_00.bits.ID != apic_id) {
- printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
+ pr_err("IOAPIC[%d]: Unable to change apic_id!\n",
+ ioapic);
return -1;
}
}
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index f00a68c..d661ee9 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -406,16 +406,13 @@
* We use physical apicids here, not logical, so just return the default
* physical broadcast to stop people from breaking us
*/
-static unsigned int numaq_cpu_mask_to_apicid(const struct cpumask *cpumask)
-{
- return 0x0F;
-}
-
-static inline unsigned int
+static int
numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
- const struct cpumask *andmask)
+ const struct cpumask *andmask,
+ unsigned int *apicid)
{
- return 0x0F;
+ *apicid = 0x0F;
+ return 0;
}
/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
@@ -441,20 +438,6 @@
return found_numaq;
}
-static void numaq_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
- /* Careful. Some cpus do not strictly honor the set of cpus
- * specified in the interrupt destination when using lowest
- * priority interrupt delivery mode.
- *
- * In particular there was a hyperthreading cpu observed to
- * deliver interrupts to the wrong hyperthread when only one
- * hyperthread was specified in the interrupt desitination.
- */
- cpumask_clear(retmask);
- cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
-}
-
static void numaq_setup_portio_remap(void)
{
int num_quads = num_online_nodes();
@@ -491,7 +474,7 @@
.check_apicid_used = numaq_check_apicid_used,
.check_apicid_present = numaq_check_apicid_present,
- .vector_allocation_domain = numaq_vector_allocation_domain,
+ .vector_allocation_domain = flat_vector_allocation_domain,
.init_apic_ldr = numaq_init_apic_ldr,
.ioapic_phys_id_map = numaq_ioapic_phys_id_map,
@@ -509,7 +492,6 @@
.set_apic_id = NULL,
.apic_id_mask = 0x0F << 24,
- .cpu_mask_to_apicid = numaq_cpu_mask_to_apicid,
.cpu_mask_to_apicid_and = numaq_cpu_mask_to_apicid_and,
.send_IPI_mask = numaq_send_IPI_mask,
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 1b291da..eb35ef9 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -66,21 +66,6 @@
#endif
}
-static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
- /*
- * Careful. Some cpus do not strictly honor the set of cpus
- * specified in the interrupt destination when using lowest
- * priority interrupt delivery mode.
- *
- * In particular there was a hyperthreading cpu observed to
- * deliver interrupts to the wrong hyperthread when only one
- * hyperthread was specified in the interrupt desitination.
- */
- cpumask_clear(retmask);
- cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
-}
-
/* should be called last. */
static int probe_default(void)
{
@@ -105,7 +90,7 @@
.check_apicid_used = default_check_apicid_used,
.check_apicid_present = default_check_apicid_present,
- .vector_allocation_domain = default_vector_allocation_domain,
+ .vector_allocation_domain = flat_vector_allocation_domain,
.init_apic_ldr = default_init_apic_ldr,
.ioapic_phys_id_map = default_ioapic_phys_id_map,
@@ -123,8 +108,7 @@
.set_apic_id = NULL,
.apic_id_mask = 0x0F << 24,
- .cpu_mask_to_apicid = default_cpu_mask_to_apicid,
- .cpu_mask_to_apicid_and = default_cpu_mask_to_apicid_and,
+ .cpu_mask_to_apicid_and = flat_cpu_mask_to_apicid_and,
.send_IPI_mask = default_send_IPI_mask_logical,
.send_IPI_mask_allbutself = default_send_IPI_mask_allbutself_logical,
@@ -208,6 +192,9 @@
if (apic->setup_apic_routing)
apic->setup_apic_routing();
+
+ if (x86_platform.apic_post_init)
+ x86_platform.apic_post_init();
}
void __init generic_apic_probe(void)
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index 3fe9866..1793dba 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -23,11 +23,6 @@
#include <asm/ipi.h>
#include <asm/setup.h>
-static int apicid_phys_pkg_id(int initial_apic_id, int index_msb)
-{
- return hard_smp_processor_id() >> index_msb;
-}
-
/*
* Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
*/
@@ -48,10 +43,8 @@
}
}
- if (is_vsmp_box()) {
- /* need to update phys_pkg_id */
- apic->phys_pkg_id = apicid_phys_pkg_id;
- }
+ if (x86_platform.apic_post_init)
+ x86_platform.apic_post_init();
}
/* Same for both flat and physical. */
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index 659897c..77c95c0e 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -26,6 +26,8 @@
*
*/
+#define pr_fmt(fmt) "summit: %s: " fmt, __func__
+
#include <linux/mm.h>
#include <linux/init.h>
#include <asm/io.h>
@@ -235,8 +237,8 @@
static void summit_setup_apic_routing(void)
{
- printk("Enabling APIC mode: Summit. Using %d I/O APICs\n",
- nr_ioapics);
+ pr_info("Enabling APIC mode: Summit. Using %d I/O APICs\n",
+ nr_ioapics);
}
static int summit_cpu_present_to_apicid(int mps_cpu)
@@ -263,43 +265,48 @@
return 1;
}
-static unsigned int summit_cpu_mask_to_apicid(const struct cpumask *cpumask)
+static inline int
+summit_cpu_mask_to_apicid(const struct cpumask *cpumask, unsigned int *dest_id)
{
unsigned int round = 0;
- int cpu, apicid = 0;
+ unsigned int cpu, apicid = 0;
/*
* The cpus in the mask must all be on the apic cluster.
*/
- for_each_cpu(cpu, cpumask) {
+ for_each_cpu_and(cpu, cpumask, cpu_online_mask) {
int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
- printk("%s: Not a valid mask!\n", __func__);
- return BAD_APICID;
+ pr_err("Not a valid mask!\n");
+ return -EINVAL;
}
apicid |= new_apicid;
round++;
}
- return apicid;
+ if (!round)
+ return -EINVAL;
+ *dest_id = apicid;
+ return 0;
}
-static unsigned int summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
- const struct cpumask *andmask)
+static int
+summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
+ const struct cpumask *andmask,
+ unsigned int *apicid)
{
- int apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0);
cpumask_var_t cpumask;
+ *apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0);
if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
- return apicid;
+ return 0;
cpumask_and(cpumask, inmask, andmask);
- cpumask_and(cpumask, cpumask, cpu_online_mask);
- apicid = summit_cpu_mask_to_apicid(cpumask);
+ summit_cpu_mask_to_apicid(cpumask, apicid);
free_cpumask_var(cpumask);
- return apicid;
+ return 0;
}
/*
@@ -320,20 +327,6 @@
return 0;
}
-static void summit_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
- /* Careful. Some cpus do not strictly honor the set of cpus
- * specified in the interrupt destination when using lowest
- * priority interrupt delivery mode.
- *
- * In particular there was a hyperthreading cpu observed to
- * deliver interrupts to the wrong hyperthread when only one
- * hyperthread was specified in the interrupt desitination.
- */
- cpumask_clear(retmask);
- cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
-}
-
#ifdef CONFIG_X86_SUMMIT_NUMA
static struct rio_table_hdr *rio_table_hdr;
static struct scal_detail *scal_devs[MAX_NUMNODES];
@@ -355,7 +348,7 @@
}
}
if (i == rio_table_hdr->num_rio_dev) {
- printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __func__);
+ pr_err("Couldn't find owner Cyclone for Winnipeg!\n");
return last_bus;
}
@@ -366,7 +359,7 @@
}
}
if (i == rio_table_hdr->num_scal_dev) {
- printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __func__);
+ pr_err("Couldn't find owner Twister for Cyclone!\n");
return last_bus;
}
@@ -396,7 +389,7 @@
num_buses = 9;
break;
default:
- printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __func__);
+ pr_info("Unsupported Winnipeg type!\n");
return last_bus;
}
@@ -411,13 +404,15 @@
int i, scal_detail_size, rio_detail_size;
if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) {
- printk(KERN_WARNING "%s: MAX_NUMNODES too low! Defined as %d, but system has %d nodes.\n", __func__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+ pr_warn("MAX_NUMNODES too low! Defined as %d, but system has %d nodes\n",
+ MAX_NUMNODES, rio_table_hdr->num_scal_dev);
return 0;
}
switch (rio_table_hdr->version) {
default:
- printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __func__, rio_table_hdr->version);
+ pr_warn("Invalid Rio Grande Table Version: %d\n",
+ rio_table_hdr->version);
return 0;
case 2:
scal_detail_size = 11;
@@ -462,7 +457,7 @@
offset = *((unsigned short *)(ptr + offset));
}
if (!rio_table_hdr) {
- printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __func__);
+ pr_err("Unable to locate Rio Grande Table in EBDA - bailing!\n");
return;
}
@@ -509,7 +504,7 @@
.check_apicid_used = summit_check_apicid_used,
.check_apicid_present = summit_check_apicid_present,
- .vector_allocation_domain = summit_vector_allocation_domain,
+ .vector_allocation_domain = flat_vector_allocation_domain,
.init_apic_ldr = summit_init_apic_ldr,
.ioapic_phys_id_map = summit_ioapic_phys_id_map,
@@ -527,7 +522,6 @@
.set_apic_id = NULL,
.apic_id_mask = 0xFF << 24,
- .cpu_mask_to_apicid = summit_cpu_mask_to_apicid,
.cpu_mask_to_apicid_and = summit_cpu_mask_to_apicid_and,
.send_IPI_mask = summit_send_IPI_mask,
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index ff35cff..c88baa4 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -81,7 +81,7 @@
}
static void
- x2apic_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
+x2apic_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
{
__x2apic_send_IPI_mask(mask, vector, APIC_DEST_ALLBUT);
}
@@ -96,36 +96,37 @@
__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLINC);
}
-static unsigned int x2apic_cpu_mask_to_apicid(const struct cpumask *cpumask)
-{
- /*
- * We're using fixed IRQ delivery, can only return one logical APIC ID.
- * May as well be the first.
- */
- int cpu = cpumask_first(cpumask);
-
- if ((unsigned)cpu < nr_cpu_ids)
- return per_cpu(x86_cpu_to_logical_apicid, cpu);
- else
- return BAD_APICID;
-}
-
-static unsigned int
+static int
x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
- const struct cpumask *andmask)
+ const struct cpumask *andmask,
+ unsigned int *apicid)
{
- int cpu;
+ u32 dest = 0;
+ u16 cluster;
+ int i;
- /*
- * We're using fixed IRQ delivery, can only return one logical APIC ID.
- * May as well be the first.
- */
- for_each_cpu_and(cpu, cpumask, andmask) {
- if (cpumask_test_cpu(cpu, cpu_online_mask))
- break;
+ for_each_cpu_and(i, cpumask, andmask) {
+ if (!cpumask_test_cpu(i, cpu_online_mask))
+ continue;
+ dest = per_cpu(x86_cpu_to_logical_apicid, i);
+ cluster = x2apic_cluster(i);
+ break;
}
- return per_cpu(x86_cpu_to_logical_apicid, cpu);
+ if (!dest)
+ return -EINVAL;
+
+ for_each_cpu_and(i, cpumask, andmask) {
+ if (!cpumask_test_cpu(i, cpu_online_mask))
+ continue;
+ if (cluster != x2apic_cluster(i))
+ continue;
+ dest |= per_cpu(x86_cpu_to_logical_apicid, i);
+ }
+
+ *apicid = dest;
+
+ return 0;
}
static void init_x2apic_ldr(void)
@@ -208,6 +209,32 @@
return 0;
}
+static const struct cpumask *x2apic_cluster_target_cpus(void)
+{
+ return cpu_all_mask;
+}
+
+/*
+ * Each x2apic cluster is an allocation domain.
+ */
+static void cluster_vector_allocation_domain(int cpu, struct cpumask *retmask,
+ const struct cpumask *mask)
+{
+ /*
+ * To minimize vector pressure, default case of boot, device bringup
+ * etc will use a single cpu for the interrupt destination.
+ *
+ * On explicit migration requests coming from irqbalance etc,
+ * interrupts will be routed to the x2apic cluster (cluster-id
+ * derived from the first cpu in the mask) members specified
+ * in the mask.
+ */
+ if (mask == x2apic_cluster_target_cpus())
+ cpumask_copy(retmask, cpumask_of(cpu));
+ else
+ cpumask_and(retmask, mask, per_cpu(cpus_in_cluster, cpu));
+}
+
static struct apic apic_x2apic_cluster = {
.name = "cluster x2apic",
@@ -219,13 +246,13 @@
.irq_delivery_mode = dest_LowestPrio,
.irq_dest_mode = 1, /* logical */
- .target_cpus = x2apic_target_cpus,
+ .target_cpus = x2apic_cluster_target_cpus,
.disable_esr = 0,
.dest_logical = APIC_DEST_LOGICAL,
.check_apicid_used = NULL,
.check_apicid_present = NULL,
- .vector_allocation_domain = x2apic_vector_allocation_domain,
+ .vector_allocation_domain = cluster_vector_allocation_domain,
.init_apic_ldr = init_x2apic_ldr,
.ioapic_phys_id_map = NULL,
@@ -243,7 +270,6 @@
.set_apic_id = x2apic_set_apic_id,
.apic_id_mask = 0xFFFFFFFFu,
- .cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid,
.cpu_mask_to_apicid_and = x2apic_cpu_mask_to_apicid_and,
.send_IPI_mask = x2apic_send_IPI_mask,
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index c17e982..e03a1e1 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -76,38 +76,6 @@
__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLINC);
}
-static unsigned int x2apic_cpu_mask_to_apicid(const struct cpumask *cpumask)
-{
- /*
- * We're using fixed IRQ delivery, can only return one phys APIC ID.
- * May as well be the first.
- */
- int cpu = cpumask_first(cpumask);
-
- if ((unsigned)cpu < nr_cpu_ids)
- return per_cpu(x86_cpu_to_apicid, cpu);
- else
- return BAD_APICID;
-}
-
-static unsigned int
-x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
- const struct cpumask *andmask)
-{
- int cpu;
-
- /*
- * We're using fixed IRQ delivery, can only return one phys APIC ID.
- * May as well be the first.
- */
- for_each_cpu_and(cpu, cpumask, andmask) {
- if (cpumask_test_cpu(cpu, cpu_online_mask))
- break;
- }
-
- return per_cpu(x86_cpu_to_apicid, cpu);
-}
-
static void init_x2apic_ldr(void)
{
}
@@ -131,13 +99,13 @@
.irq_delivery_mode = dest_Fixed,
.irq_dest_mode = 0, /* physical */
- .target_cpus = x2apic_target_cpus,
+ .target_cpus = online_target_cpus,
.disable_esr = 0,
.dest_logical = 0,
.check_apicid_used = NULL,
.check_apicid_present = NULL,
- .vector_allocation_domain = x2apic_vector_allocation_domain,
+ .vector_allocation_domain = default_vector_allocation_domain,
.init_apic_ldr = init_x2apic_ldr,
.ioapic_phys_id_map = NULL,
@@ -155,8 +123,7 @@
.set_apic_id = x2apic_set_apic_id,
.apic_id_mask = 0xFFFFFFFFu,
- .cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid,
- .cpu_mask_to_apicid_and = x2apic_cpu_mask_to_apicid_and,
+ .cpu_mask_to_apicid_and = default_cpu_mask_to_apicid_and,
.send_IPI_mask = x2apic_send_IPI_mask,
.send_IPI_mask_allbutself = x2apic_send_IPI_mask_allbutself,
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index c6d03f7..8cfade9 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -185,17 +185,6 @@
unsigned long sn_rtc_cycles_per_second;
EXPORT_SYMBOL(sn_rtc_cycles_per_second);
-static const struct cpumask *uv_target_cpus(void)
-{
- return cpu_online_mask;
-}
-
-static void uv_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
- cpumask_clear(retmask);
- cpumask_set_cpu(cpu, retmask);
-}
-
static int __cpuinit uv_wakeup_secondary(int phys_apicid, unsigned long start_rip)
{
#ifdef CONFIG_SMP
@@ -280,25 +269,12 @@
{
}
-static unsigned int uv_cpu_mask_to_apicid(const struct cpumask *cpumask)
-{
- /*
- * We're using fixed IRQ delivery, can only return one phys APIC ID.
- * May as well be the first.
- */
- int cpu = cpumask_first(cpumask);
-
- if ((unsigned)cpu < nr_cpu_ids)
- return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits;
- else
- return BAD_APICID;
-}
-
-static unsigned int
+static int
uv_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
- const struct cpumask *andmask)
+ const struct cpumask *andmask,
+ unsigned int *apicid)
{
- int cpu;
+ int unsigned cpu;
/*
* We're using fixed IRQ delivery, can only return one phys APIC ID.
@@ -308,7 +284,13 @@
if (cpumask_test_cpu(cpu, cpu_online_mask))
break;
}
- return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits;
+
+ if (likely(cpu < nr_cpu_ids)) {
+ *apicid = per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits;
+ return 0;
+ }
+
+ return -EINVAL;
}
static unsigned int x2apic_get_apic_id(unsigned long x)
@@ -362,13 +344,13 @@
.irq_delivery_mode = dest_Fixed,
.irq_dest_mode = 0, /* physical */
- .target_cpus = uv_target_cpus,
+ .target_cpus = online_target_cpus,
.disable_esr = 0,
.dest_logical = APIC_DEST_LOGICAL,
.check_apicid_used = NULL,
.check_apicid_present = NULL,
- .vector_allocation_domain = uv_vector_allocation_domain,
+ .vector_allocation_domain = default_vector_allocation_domain,
.init_apic_ldr = uv_init_apic_ldr,
.ioapic_phys_id_map = NULL,
@@ -386,7 +368,6 @@
.set_apic_id = set_apic_id,
.apic_id_mask = 0xFFFFFFFFu,
- .cpu_mask_to_apicid = uv_cpu_mask_to_apicid,
.cpu_mask_to_apicid_and = uv_cpu_mask_to_apicid_and,
.send_IPI_mask = uv_send_IPI_mask,
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 07b0c0d..d65464e 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -201,6 +201,8 @@
* http://www.microsoft.com/whdc/archive/amp_12.mspx]
*/
+#define pr_fmt(fmt) "apm: " fmt
+
#include <linux/module.h>
#include <linux/poll.h>
@@ -485,11 +487,11 @@
if (error_table[i].key == err)
break;
if (i < ERROR_COUNT)
- printk(KERN_NOTICE "apm: %s: %s\n", str, error_table[i].msg);
+ pr_notice("%s: %s\n", str, error_table[i].msg);
else if (err < 0)
- printk(KERN_NOTICE "apm: %s: linux error code %i\n", str, err);
+ pr_notice("%s: linux error code %i\n", str, err);
else
- printk(KERN_NOTICE "apm: %s: unknown error code %#2.2x\n",
+ pr_notice("%s: unknown error code %#2.2x\n",
str, err);
}
@@ -1184,7 +1186,7 @@
static int notified;
if (notified++ == 0)
- printk(KERN_ERR "apm: an event queue overflowed\n");
+ pr_err("an event queue overflowed\n");
if (++as->event_tail >= APM_MAX_EVENTS)
as->event_tail = 0;
}
@@ -1447,7 +1449,7 @@
static int check_apm_user(struct apm_user *as, const char *func)
{
if (as == NULL || as->magic != APM_BIOS_MAGIC) {
- printk(KERN_ERR "apm: %s passed bad filp\n", func);
+ pr_err("%s passed bad filp\n", func);
return 1;
}
return 0;
@@ -1586,7 +1588,7 @@
as1 = as1->next)
;
if (as1 == NULL)
- printk(KERN_ERR "apm: filp not in user list\n");
+ pr_err("filp not in user list\n");
else
as1->next = as->next;
}
@@ -1600,11 +1602,9 @@
struct apm_user *as;
as = kmalloc(sizeof(*as), GFP_KERNEL);
- if (as == NULL) {
- printk(KERN_ERR "apm: cannot allocate struct of size %d bytes\n",
- sizeof(*as));
+ if (as == NULL)
return -ENOMEM;
- }
+
as->magic = APM_BIOS_MAGIC;
as->event_tail = as->event_head = 0;
as->suspends_pending = as->standbys_pending = 0;
@@ -2313,16 +2313,16 @@
}
if (apm_info.disabled) {
- printk(KERN_NOTICE "apm: disabled on user request.\n");
+ pr_notice("disabled on user request.\n");
return -ENODEV;
}
if ((num_online_cpus() > 1) && !power_off && !smp) {
- printk(KERN_NOTICE "apm: disabled - APM is not SMP safe.\n");
+ pr_notice("disabled - APM is not SMP safe.\n");
apm_info.disabled = 1;
return -ENODEV;
}
if (!acpi_disabled) {
- printk(KERN_NOTICE "apm: overridden by ACPI.\n");
+ pr_notice("overridden by ACPI.\n");
apm_info.disabled = 1;
return -ENODEV;
}
@@ -2356,8 +2356,7 @@
kapmd_task = kthread_create(apm, NULL, "kapmd");
if (IS_ERR(kapmd_task)) {
- printk(KERN_ERR "apm: disabled - Unable to start kernel "
- "thread.\n");
+ pr_err("disabled - Unable to start kernel thread\n");
err = PTR_ERR(kapmd_task);
kapmd_task = NULL;
remove_proc_entry("apm", NULL);
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 6ab6aa2..bac4c38 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -32,7 +32,9 @@
ifdef CONFIG_PERF_EVENTS
obj-$(CONFIG_CPU_SUP_AMD) += perf_event_amd.o
-obj-$(CONFIG_CPU_SUP_INTEL) += perf_event_p6.o perf_event_p4.o perf_event_intel_lbr.o perf_event_intel_ds.o perf_event_intel.o
+obj-$(CONFIG_CPU_SUP_INTEL) += perf_event_p6.o perf_event_p4.o
+obj-$(CONFIG_CPU_SUP_INTEL) += perf_event_intel_lbr.o perf_event_intel_ds.o perf_event_intel.o
+obj-$(CONFIG_CPU_SUP_INTEL) += perf_event_intel_uncore.o
endif
obj-$(CONFIG_X86_MCE) += mcheck/
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 146bb62..9d92e19 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -19,6 +19,39 @@
#include "cpu.h"
+static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
+{
+ struct cpuinfo_x86 *c = &cpu_data(smp_processor_id());
+ u32 gprs[8] = { 0 };
+ int err;
+
+ WARN_ONCE((c->x86 != 0xf), "%s should only be used on K8!\n", __func__);
+
+ gprs[1] = msr;
+ gprs[7] = 0x9c5a203a;
+
+ err = rdmsr_safe_regs(gprs);
+
+ *p = gprs[0] | ((u64)gprs[2] << 32);
+
+ return err;
+}
+
+static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
+{
+ struct cpuinfo_x86 *c = &cpu_data(smp_processor_id());
+ u32 gprs[8] = { 0 };
+
+ WARN_ONCE((c->x86 != 0xf), "%s should only be used on K8!\n", __func__);
+
+ gprs[0] = (u32)val;
+ gprs[1] = msr;
+ gprs[2] = val >> 32;
+ gprs[7] = 0x9c5a203a;
+
+ return wrmsr_safe_regs(gprs);
+}
+
#ifdef CONFIG_X86_32
/*
* B step AMD K6 before B 9730xxxx have hardware bugs that can cause
@@ -586,9 +619,9 @@
!cpu_has(c, X86_FEATURE_TOPOEXT)) {
u64 val;
- if (!rdmsrl_amd_safe(0xc0011005, &val)) {
+ if (!rdmsrl_safe(0xc0011005, &val)) {
val |= 1ULL << 54;
- wrmsrl_amd_safe(0xc0011005, val);
+ wrmsrl_safe(0xc0011005, val);
rdmsrl(0xc0011005, val);
if (val & (1ULL << 54)) {
set_cpu_cap(c, X86_FEATURE_TOPOEXT);
@@ -679,7 +712,7 @@
err = rdmsrl_safe(MSR_AMD64_MCx_MASK(4), &mask);
if (err == 0) {
mask |= (1 << 10);
- checking_wrmsrl(MSR_AMD64_MCx_MASK(4), mask);
+ wrmsrl_safe(MSR_AMD64_MCx_MASK(4), mask);
}
}
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 46674fb..c97bb7b 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -55,8 +55,8 @@
if (!boot_cpu_data.hard_math) {
#ifndef CONFIG_MATH_EMULATION
- printk(KERN_EMERG "No coprocessor found and no math emulation present.\n");
- printk(KERN_EMERG "Giving up.\n");
+ pr_emerg("No coprocessor found and no math emulation present\n");
+ pr_emerg("Giving up\n");
for (;;) ;
#endif
return;
@@ -86,7 +86,7 @@
boot_cpu_data.fdiv_bug = fdiv_bug;
if (boot_cpu_data.fdiv_bug)
- printk(KERN_WARNING "Hmm, FPU with FDIV bug.\n");
+ pr_warn("Hmm, FPU with FDIV bug\n");
}
static void __init check_hlt(void)
@@ -94,16 +94,16 @@
if (boot_cpu_data.x86 >= 5 || paravirt_enabled())
return;
- printk(KERN_INFO "Checking 'hlt' instruction... ");
+ pr_info("Checking 'hlt' instruction... ");
if (!boot_cpu_data.hlt_works_ok) {
- printk("disabled\n");
+ pr_cont("disabled\n");
return;
}
halt();
halt();
halt();
halt();
- printk(KERN_CONT "OK.\n");
+ pr_cont("OK\n");
}
/*
@@ -116,7 +116,7 @@
#ifndef CONFIG_X86_POPAD_OK
int res, inp = (int) &res;
- printk(KERN_INFO "Checking for popad bug... ");
+ pr_info("Checking for popad bug... ");
__asm__ __volatile__(
"movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx "
: "=&a" (res)
@@ -127,9 +127,9 @@
* CPU hard. Too bad.
*/
if (res != 12345678)
- printk(KERN_CONT "Buggy.\n");
+ pr_cont("Buggy\n");
else
- printk(KERN_CONT "OK.\n");
+ pr_cont("OK\n");
#endif
}
@@ -161,7 +161,7 @@
{
identify_boot_cpu();
#ifndef CONFIG_SMP
- printk(KERN_INFO "CPU: ");
+ pr_info("CPU: ");
print_cpu_info(&boot_cpu_data);
#endif
check_config();
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 6b9333b..5bbc082 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -947,7 +947,7 @@
index_max = msr_range_array[i].max;
for (index = index_min; index < index_max; index++) {
- if (rdmsrl_amd_safe(index, &val))
+ if (rdmsrl_safe(index, &val))
continue;
printk(KERN_INFO " MSR%08x: %016llx\n", index, val);
}
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index da27c5d..9473e87 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -7,6 +7,9 @@
* Copyright 2008 Intel Corporation
* Author: Andi Kleen
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/thread_info.h>
#include <linux/capability.h>
#include <linux/miscdevice.h>
@@ -210,7 +213,7 @@
cpu_relax();
if (!m->finished && retries >= 4) {
- pr_err("MCE: skipping error being logged currently!\n");
+ pr_err("skipping error being logged currently!\n");
break;
}
}
@@ -1167,8 +1170,9 @@
{
/* mce_severity() should not hand us an ACTION_REQUIRED error */
BUG_ON(flags & MF_ACTION_REQUIRED);
- printk(KERN_ERR "Uncorrected memory error in page 0x%lx ignored\n"
- "Rebuild kernel with CONFIG_MEMORY_FAILURE=y for smarter handling\n", pfn);
+ pr_err("Uncorrected memory error in page 0x%lx ignored\n"
+ "Rebuild kernel with CONFIG_MEMORY_FAILURE=y for smarter handling\n",
+ pfn);
return 0;
}
@@ -1186,6 +1190,7 @@
{
unsigned long pfn;
struct mce_info *mi = mce_find_info();
+ int flags = MF_ACTION_REQUIRED;
if (!mi)
mce_panic("Lost physical address for unconsumed uncorrectable error", NULL, NULL);
@@ -1200,8 +1205,9 @@
* doomed. We still need to mark the page as poisoned and alert any
* other users of the page.
*/
- if (memory_failure(pfn, MCE_VECTOR, MF_ACTION_REQUIRED) < 0 ||
- mi->restartable == 0) {
+ if (!mi->restartable)
+ flags |= MF_MUST_KILL;
+ if (memory_failure(pfn, MCE_VECTOR, flags) < 0) {
pr_err("Memory error not recovered");
force_sig(SIGBUS, current);
}
@@ -1358,11 +1364,10 @@
b = cap & MCG_BANKCNT_MASK;
if (!banks)
- printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b);
+ pr_info("CPU supports %d MCE banks\n", b);
if (b > MAX_NR_BANKS) {
- printk(KERN_WARNING
- "MCE: Using only %u machine check banks out of %u\n",
+ pr_warn("Using only %u machine check banks out of %u\n",
MAX_NR_BANKS, b);
b = MAX_NR_BANKS;
}
@@ -1419,7 +1424,7 @@
static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
{
if (c->x86_vendor == X86_VENDOR_UNKNOWN) {
- pr_info("MCE: unknown CPU type - not enabling MCE support.\n");
+ pr_info("unknown CPU type - not enabling MCE support\n");
return -EOPNOTSUPP;
}
@@ -1574,7 +1579,7 @@
/* Handle unconfigured int18 (should never happen) */
static void unexpected_machine_check(struct pt_regs *regs, long error_code)
{
- printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n",
+ pr_err("CPU#%d: Unexpected int18 (Machine Check)\n",
smp_processor_id());
}
@@ -1893,8 +1898,7 @@
get_option(&str, &monarch_timeout);
}
} else {
- printk(KERN_INFO "mce argument %s ignored. Please use /sys\n",
- str);
+ pr_info("mce argument %s ignored. Please use /sys\n", str);
return 0;
}
return 1;
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index f4873a6..671b95a 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -1,15 +1,17 @@
/*
- * (c) 2005, 2006 Advanced Micro Devices, Inc.
+ * (c) 2005-2012 Advanced Micro Devices, Inc.
* Your use of this code is subject to the terms and conditions of the
* GNU general public license version 2. See "COPYING" or
* http://www.gnu.org/licenses/gpl.html
*
* Written by Jacob Shin - AMD, Inc.
*
- * Support : jacob.shin@amd.com
+ * Support: borislav.petkov@amd.com
*
* April 2006
* - added support for AMD Family 0x10 processors
+ * May 2012
+ * - major scrubbing
*
* All MC4_MISCi registers are shared between multi-cores
*/
@@ -25,6 +27,7 @@
#include <linux/cpu.h>
#include <linux/smp.h>
+#include <asm/amd_nb.h>
#include <asm/apic.h>
#include <asm/idle.h>
#include <asm/mce.h>
@@ -45,23 +48,15 @@
#define MASK_BLKPTR_LO 0xFF000000
#define MCG_XBLK_ADDR 0xC0000400
-struct threshold_block {
- unsigned int block;
- unsigned int bank;
- unsigned int cpu;
- u32 address;
- u16 interrupt_enable;
- bool interrupt_capable;
- u16 threshold_limit;
- struct kobject kobj;
- struct list_head miscj;
+static const char * const th_names[] = {
+ "load_store",
+ "insn_fetch",
+ "combined_unit",
+ "",
+ "northbridge",
+ "execution_unit",
};
-struct threshold_bank {
- struct kobject *kobj;
- struct threshold_block *blocks;
- cpumask_var_t cpus;
-};
static DEFINE_PER_CPU(struct threshold_bank * [NR_BANKS], threshold_banks);
static unsigned char shared_bank[NR_BANKS] = {
@@ -84,6 +79,26 @@
u16 old_limit;
};
+static const char * const bank4_names(struct threshold_block *b)
+{
+ switch (b->address) {
+ /* MSR4_MISC0 */
+ case 0x00000413:
+ return "dram";
+
+ case 0xc0000408:
+ return "ht_links";
+
+ case 0xc0000409:
+ return "l3_cache";
+
+ default:
+ WARN(1, "Funny MSR: 0x%08x\n", b->address);
+ return "";
+ }
+};
+
+
static bool lvt_interrupt_supported(unsigned int bank, u32 msr_high_bits)
{
/*
@@ -224,8 +239,6 @@
if (!block)
per_cpu(bank_map, cpu) |= (1 << bank);
- if (shared_bank[bank] && c->cpu_core_id)
- break;
memset(&b, 0, sizeof(b));
b.cpu = cpu;
@@ -326,7 +339,7 @@
#define SHOW_FIELDS(name) \
static ssize_t show_ ## name(struct threshold_block *b, char *buf) \
{ \
- return sprintf(buf, "%lx\n", (unsigned long) b->name); \
+ return sprintf(buf, "%lu\n", (unsigned long) b->name); \
}
SHOW_FIELDS(interrupt_enable)
SHOW_FIELDS(threshold_limit)
@@ -377,37 +390,20 @@
return size;
}
-struct threshold_block_cross_cpu {
- struct threshold_block *tb;
- long retval;
-};
-
-static void local_error_count_handler(void *_tbcc)
-{
- struct threshold_block_cross_cpu *tbcc = _tbcc;
- struct threshold_block *b = tbcc->tb;
- u32 low, high;
-
- rdmsr(b->address, low, high);
- tbcc->retval = (high & 0xFFF) - (THRESHOLD_MAX - b->threshold_limit);
-}
-
static ssize_t show_error_count(struct threshold_block *b, char *buf)
{
- struct threshold_block_cross_cpu tbcc = { .tb = b, };
+ u32 lo, hi;
- smp_call_function_single(b->cpu, local_error_count_handler, &tbcc, 1);
- return sprintf(buf, "%lx\n", tbcc.retval);
+ rdmsr_on_cpu(b->cpu, b->address, &lo, &hi);
+
+ return sprintf(buf, "%u\n", ((hi & THRESHOLD_MAX) -
+ (THRESHOLD_MAX - b->threshold_limit)));
}
-static ssize_t store_error_count(struct threshold_block *b,
- const char *buf, size_t count)
-{
- struct thresh_restart tr = { .b = b, .reset = 1, .old_limit = 0 };
-
- smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1);
- return 1;
-}
+static struct threshold_attr error_count = {
+ .attr = {.name = __stringify(error_count), .mode = 0444 },
+ .show = show_error_count,
+};
#define RW_ATTR(val) \
static struct threshold_attr val = { \
@@ -418,7 +414,6 @@
RW_ATTR(interrupt_enable);
RW_ATTR(threshold_limit);
-RW_ATTR(error_count);
static struct attribute *default_attrs[] = {
&threshold_limit.attr,
@@ -517,7 +512,7 @@
err = kobject_init_and_add(&b->kobj, &threshold_ktype,
per_cpu(threshold_banks, cpu)[bank]->kobj,
- "misc%i", block);
+ (bank == 4 ? bank4_names(b) : th_names[bank]));
if (err)
goto out_free;
recurse:
@@ -548,98 +543,91 @@
return err;
}
-static __cpuinit long
-local_allocate_threshold_blocks(int cpu, unsigned int bank)
+static __cpuinit int __threshold_add_blocks(struct threshold_bank *b)
{
- return allocate_threshold_blocks(cpu, bank, 0,
- MSR_IA32_MC0_MISC + bank * 4);
+ struct list_head *head = &b->blocks->miscj;
+ struct threshold_block *pos = NULL;
+ struct threshold_block *tmp = NULL;
+ int err = 0;
+
+ err = kobject_add(&b->blocks->kobj, b->kobj, b->blocks->kobj.name);
+ if (err)
+ return err;
+
+ list_for_each_entry_safe(pos, tmp, head, miscj) {
+
+ err = kobject_add(&pos->kobj, b->kobj, pos->kobj.name);
+ if (err) {
+ list_for_each_entry_safe_reverse(pos, tmp, head, miscj)
+ kobject_del(&pos->kobj);
+
+ return err;
+ }
+ }
+ return err;
}
-/* symlinks sibling shared banks to first core. first core owns dir/files. */
static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
{
- int i, err = 0;
- struct threshold_bank *b = NULL;
struct device *dev = per_cpu(mce_device, cpu);
- char name[32];
+ struct amd_northbridge *nb = NULL;
+ struct threshold_bank *b = NULL;
+ const char *name = th_names[bank];
+ int err = 0;
- sprintf(name, "threshold_bank%i", bank);
+ if (shared_bank[bank]) {
-#ifdef CONFIG_SMP
- if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) { /* symlink */
- i = cpumask_first(cpu_llc_shared_mask(cpu));
+ nb = node_to_amd_nb(amd_get_nb_id(cpu));
+ WARN_ON(!nb);
- /* first core not up yet */
- if (cpu_data(i).cpu_core_id)
+ /* threshold descriptor already initialized on this node? */
+ if (nb->bank4) {
+ /* yes, use it */
+ b = nb->bank4;
+ err = kobject_add(b->kobj, &dev->kobj, name);
+ if (err)
+ goto out;
+
+ per_cpu(threshold_banks, cpu)[bank] = b;
+ atomic_inc(&b->cpus);
+
+ err = __threshold_add_blocks(b);
+
goto out;
-
- /* already linked */
- if (per_cpu(threshold_banks, cpu)[bank])
- goto out;
-
- b = per_cpu(threshold_banks, i)[bank];
-
- if (!b)
- goto out;
-
- err = sysfs_create_link(&dev->kobj, b->kobj, name);
- if (err)
- goto out;
-
- cpumask_copy(b->cpus, cpu_llc_shared_mask(cpu));
- per_cpu(threshold_banks, cpu)[bank] = b;
-
- goto out;
+ }
}
-#endif
b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL);
if (!b) {
err = -ENOMEM;
goto out;
}
- if (!zalloc_cpumask_var(&b->cpus, GFP_KERNEL)) {
- kfree(b);
- err = -ENOMEM;
- goto out;
- }
b->kobj = kobject_create_and_add(name, &dev->kobj);
- if (!b->kobj)
+ if (!b->kobj) {
+ err = -EINVAL;
goto out_free;
-
-#ifndef CONFIG_SMP
- cpumask_setall(b->cpus);
-#else
- cpumask_set_cpu(cpu, b->cpus);
-#endif
+ }
per_cpu(threshold_banks, cpu)[bank] = b;
- err = local_allocate_threshold_blocks(cpu, bank);
- if (err)
- goto out_free;
+ if (shared_bank[bank]) {
+ atomic_set(&b->cpus, 1);
- for_each_cpu(i, b->cpus) {
- if (i == cpu)
- continue;
-
- dev = per_cpu(mce_device, i);
- if (dev)
- err = sysfs_create_link(&dev->kobj,b->kobj, name);
- if (err)
- goto out;
-
- per_cpu(threshold_banks, i)[bank] = b;
+ /* nb is already initialized, see above */
+ WARN_ON(nb->bank4);
+ nb->bank4 = b;
}
- goto out;
+ err = allocate_threshold_blocks(cpu, bank, 0,
+ MSR_IA32_MC0_MISC + bank * 4);
+ if (!err)
+ goto out;
-out_free:
- per_cpu(threshold_banks, cpu)[bank] = NULL;
- free_cpumask_var(b->cpus);
+ out_free:
kfree(b);
-out:
+
+ out:
return err;
}
@@ -660,12 +648,6 @@
return err;
}
-/*
- * let's be hotplug friendly.
- * in case of multiple core processors, the first core always takes ownership
- * of shared sysfs dir/files, and rest of the cores will be symlinked to it.
- */
-
static void deallocate_threshold_block(unsigned int cpu,
unsigned int bank)
{
@@ -686,41 +668,42 @@
per_cpu(threshold_banks, cpu)[bank]->blocks = NULL;
}
+static void __threshold_remove_blocks(struct threshold_bank *b)
+{
+ struct threshold_block *pos = NULL;
+ struct threshold_block *tmp = NULL;
+
+ kobject_del(b->kobj);
+
+ list_for_each_entry_safe(pos, tmp, &b->blocks->miscj, miscj)
+ kobject_del(&pos->kobj);
+}
+
static void threshold_remove_bank(unsigned int cpu, int bank)
{
+ struct amd_northbridge *nb;
struct threshold_bank *b;
- struct device *dev;
- char name[32];
- int i = 0;
b = per_cpu(threshold_banks, cpu)[bank];
if (!b)
return;
+
if (!b->blocks)
goto free_out;
- sprintf(name, "threshold_bank%i", bank);
-
-#ifdef CONFIG_SMP
- /* sibling symlink */
- if (shared_bank[bank] && b->blocks->cpu != cpu) {
- dev = per_cpu(mce_device, cpu);
- sysfs_remove_link(&dev->kobj, name);
- per_cpu(threshold_banks, cpu)[bank] = NULL;
-
- return;
- }
-#endif
-
- /* remove all sibling symlinks before unregistering */
- for_each_cpu(i, b->cpus) {
- if (i == cpu)
- continue;
-
- dev = per_cpu(mce_device, i);
- if (dev)
- sysfs_remove_link(&dev->kobj, name);
- per_cpu(threshold_banks, i)[bank] = NULL;
+ if (shared_bank[bank]) {
+ if (!atomic_dec_and_test(&b->cpus)) {
+ __threshold_remove_blocks(b);
+ per_cpu(threshold_banks, cpu)[bank] = NULL;
+ return;
+ } else {
+ /*
+ * the last CPU on this node using the shared bank is
+ * going away, remove that bank now.
+ */
+ nb = node_to_amd_nb(amd_get_nb_id(cpu));
+ nb->bank4 = NULL;
+ }
}
deallocate_threshold_block(cpu, bank);
@@ -728,7 +711,6 @@
free_out:
kobject_del(b->kobj);
kobject_put(b->kobj);
- free_cpumask_var(b->cpus);
kfree(b);
per_cpu(threshold_banks, cpu)[bank] = NULL;
}
diff --git a/arch/x86/kernel/cpu/mkcapflags.pl b/arch/x86/kernel/cpu/mkcapflags.pl
index dfea390..c7b3fe2 100644
--- a/arch/x86/kernel/cpu/mkcapflags.pl
+++ b/arch/x86/kernel/cpu/mkcapflags.pl
@@ -1,4 +1,4 @@
-#!/usr/bin/perl
+#!/usr/bin/perl -w
#
# Generate the x86_cap_flags[] array from include/asm-x86/cpufeature.h
#
@@ -11,22 +11,35 @@
print OUT "#include <asm/cpufeature.h>\n\n";
print OUT "const char * const x86_cap_flags[NCAPINTS*32] = {\n";
+%features = ();
+$err = 0;
+
while (defined($line = <IN>)) {
if ($line =~ /^\s*\#\s*define\s+(X86_FEATURE_(\S+))\s+(.*)$/) {
$macro = $1;
- $feature = $2;
+ $feature = "\L$2";
$tail = $3;
if ($tail =~ /\/\*\s*\"([^"]*)\".*\*\//) {
- $feature = $1;
+ $feature = "\L$1";
}
- if ($feature ne '') {
- printf OUT "\t%-32s = \"%s\",\n",
- "[$macro]", "\L$feature";
+ next if ($feature eq '');
+
+ if ($features{$feature}++) {
+ print STDERR "$in: duplicate feature name: $feature\n";
+ $err++;
}
+ printf OUT "\t%-32s = \"%s\",\n", "[$macro]", $feature;
}
}
print OUT "};\n";
close(IN);
close(OUT);
+
+if ($err) {
+ unlink($out);
+ exit(1);
+}
+
+exit(0);
diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c
index bdda2e6..35ffda5 100644
--- a/arch/x86/kernel/cpu/mtrr/cleanup.c
+++ b/arch/x86/kernel/cpu/mtrr/cleanup.c
@@ -258,11 +258,11 @@
/* Compute the maximum size with which we can make a range: */
if (range_startk)
- max_align = ffs(range_startk) - 1;
+ max_align = __ffs(range_startk);
else
- max_align = 32;
+ max_align = BITS_PER_LONG - 1;
- align = fls(range_sizek) - 1;
+ align = __fls(range_sizek);
if (align > max_align)
align = max_align;
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 75772ae..e9fe907 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -361,11 +361,7 @@
}
pr_debug("MTRR variable ranges %sabled:\n",
mtrr_state.enabled & 2 ? "en" : "dis");
- if (size_or_mask & 0xffffffffUL)
- high_width = ffs(size_or_mask & 0xffffffffUL) - 1;
- else
- high_width = ffs(size_or_mask>>32) + 32 - 1;
- high_width = (high_width - (32 - PAGE_SHIFT) + 3) / 4;
+ high_width = (__ffs64(size_or_mask) - (32 - PAGE_SHIFT) + 3) / 4;
for (i = 0; i < num_var_ranges; ++i) {
if (mtrr_state.var_ranges[i].mask_lo & (1 << 11))
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index c4706cf..29557aa 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -35,17 +35,6 @@
#include "perf_event.h"
-#if 0
-#undef wrmsrl
-#define wrmsrl(msr, val) \
-do { \
- trace_printk("wrmsrl(%lx, %lx)\n", (unsigned long)(msr),\
- (unsigned long)(val)); \
- native_write_msr((msr), (u32)((u64)(val)), \
- (u32)((u64)(val) >> 32)); \
-} while (0)
-#endif
-
struct x86_pmu x86_pmu __read_mostly;
DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
@@ -74,7 +63,7 @@
int idx = hwc->idx;
s64 delta;
- if (idx == X86_PMC_IDX_FIXED_BTS)
+ if (idx == INTEL_PMC_IDX_FIXED_BTS)
return 0;
/*
@@ -86,7 +75,7 @@
*/
again:
prev_raw_count = local64_read(&hwc->prev_count);
- rdmsrl(hwc->event_base, new_raw_count);
+ rdpmcl(hwc->event_base_rdpmc, new_raw_count);
if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
new_raw_count) != prev_raw_count)
@@ -189,7 +178,7 @@
static bool check_hw_exists(void)
{
- u64 val, val_new = 0;
+ u64 val, val_new = ~0;
int i, reg, ret = 0;
/*
@@ -222,8 +211,9 @@
* that don't trap on the MSR access and always return 0s.
*/
val = 0xabcdUL;
- ret = checking_wrmsrl(x86_pmu_event_addr(0), val);
- ret |= rdmsrl_safe(x86_pmu_event_addr(0), &val_new);
+ reg = x86_pmu_event_addr(0);
+ ret = wrmsrl_safe(reg, val);
+ ret |= rdmsrl_safe(reg, &val_new);
if (ret || val != val_new)
goto msr_fail;
@@ -240,6 +230,7 @@
msr_fail:
printk(KERN_CONT "Broken PMU hardware detected, using software events only.\n");
+ printk(KERN_ERR "Failed to access perfctr msr (MSR %x is %Lx)\n", reg, val_new);
return false;
}
@@ -388,7 +379,7 @@
int precise = 0;
/* Support for constant skid */
- if (x86_pmu.pebs_active) {
+ if (x86_pmu.pebs_active && !x86_pmu.pebs_broken) {
precise++;
/* Support for IP fixup */
@@ -637,8 +628,8 @@
c = sched->constraints[sched->state.event];
/* Prefer fixed purpose counters */
- if (x86_pmu.num_counters_fixed) {
- idx = X86_PMC_IDX_FIXED;
+ if (c->idxmsk64 & (~0ULL << INTEL_PMC_IDX_FIXED)) {
+ idx = INTEL_PMC_IDX_FIXED;
for_each_set_bit_from(idx, c->idxmsk, X86_PMC_IDX_MAX) {
if (!__test_and_set_bit(idx, sched->state.used))
goto done;
@@ -646,7 +637,7 @@
}
/* Grab the first unused counter starting with idx */
idx = sched->state.counter;
- for_each_set_bit_from(idx, c->idxmsk, X86_PMC_IDX_FIXED) {
+ for_each_set_bit_from(idx, c->idxmsk, INTEL_PMC_IDX_FIXED) {
if (!__test_and_set_bit(idx, sched->state.used))
goto done;
}
@@ -704,8 +695,8 @@
/*
* Assign a counter for each event.
*/
-static int perf_assign_events(struct event_constraint **constraints, int n,
- int wmin, int wmax, int *assign)
+int perf_assign_events(struct event_constraint **constraints, int n,
+ int wmin, int wmax, int *assign)
{
struct perf_sched sched;
@@ -824,15 +815,17 @@
hwc->last_cpu = smp_processor_id();
hwc->last_tag = ++cpuc->tags[i];
- if (hwc->idx == X86_PMC_IDX_FIXED_BTS) {
+ if (hwc->idx == INTEL_PMC_IDX_FIXED_BTS) {
hwc->config_base = 0;
hwc->event_base = 0;
- } else if (hwc->idx >= X86_PMC_IDX_FIXED) {
+ } else if (hwc->idx >= INTEL_PMC_IDX_FIXED) {
hwc->config_base = MSR_ARCH_PERFMON_FIXED_CTR_CTRL;
- hwc->event_base = MSR_ARCH_PERFMON_FIXED_CTR0 + (hwc->idx - X86_PMC_IDX_FIXED);
+ hwc->event_base = MSR_ARCH_PERFMON_FIXED_CTR0 + (hwc->idx - INTEL_PMC_IDX_FIXED);
+ hwc->event_base_rdpmc = (hwc->idx - INTEL_PMC_IDX_FIXED) | 1<<30;
} else {
hwc->config_base = x86_pmu_config_addr(hwc->idx);
hwc->event_base = x86_pmu_event_addr(hwc->idx);
+ hwc->event_base_rdpmc = hwc->idx;
}
}
@@ -930,7 +923,7 @@
s64 period = hwc->sample_period;
int ret = 0, idx = hwc->idx;
- if (idx == X86_PMC_IDX_FIXED_BTS)
+ if (idx == INTEL_PMC_IDX_FIXED_BTS)
return 0;
/*
@@ -1316,7 +1309,6 @@
static int __init init_hw_perf_events(void)
{
struct x86_pmu_quirk *quirk;
- struct event_constraint *c;
int err;
pr_info("Performance Events: ");
@@ -1347,21 +1339,8 @@
for (quirk = x86_pmu.quirks; quirk; quirk = quirk->next)
quirk->func();
- if (x86_pmu.num_counters > X86_PMC_MAX_GENERIC) {
- WARN(1, KERN_ERR "hw perf events %d > max(%d), clipping!",
- x86_pmu.num_counters, X86_PMC_MAX_GENERIC);
- x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
- }
- x86_pmu.intel_ctrl = (1 << x86_pmu.num_counters) - 1;
-
- if (x86_pmu.num_counters_fixed > X86_PMC_MAX_FIXED) {
- WARN(1, KERN_ERR "hw perf events fixed %d > max(%d), clipping!",
- x86_pmu.num_counters_fixed, X86_PMC_MAX_FIXED);
- x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
- }
-
- x86_pmu.intel_ctrl |=
- ((1LL << x86_pmu.num_counters_fixed)-1) << X86_PMC_IDX_FIXED;
+ if (!x86_pmu.intel_ctrl)
+ x86_pmu.intel_ctrl = (1 << x86_pmu.num_counters) - 1;
perf_events_lapic_init();
register_nmi_handler(NMI_LOCAL, perf_event_nmi_handler, 0, "PMI");
@@ -1370,22 +1349,6 @@
__EVENT_CONSTRAINT(0, (1ULL << x86_pmu.num_counters) - 1,
0, x86_pmu.num_counters, 0);
- if (x86_pmu.event_constraints) {
- /*
- * event on fixed counter2 (REF_CYCLES) only works on this
- * counter, so do not extend mask to generic counters
- */
- for_each_event_constraint(c, x86_pmu.event_constraints) {
- if (c->cmask != X86_RAW_EVENT_MASK
- || c->idxmsk64 == X86_PMC_MSK_FIXED_REF_CYCLES) {
- continue;
- }
-
- c->idxmsk64 |= (1ULL << x86_pmu.num_counters) - 1;
- c->weight += x86_pmu.num_counters;
- }
- }
-
x86_pmu.attr_rdpmc = 1; /* enable userspace RDPMC usage by default */
x86_pmu_format_group.attrs = x86_pmu.format_attrs;
@@ -1620,8 +1583,8 @@
if (!x86_pmu.attr_rdpmc)
return 0;
- if (x86_pmu.num_counters_fixed && idx >= X86_PMC_IDX_FIXED) {
- idx -= X86_PMC_IDX_FIXED;
+ if (x86_pmu.num_counters_fixed && idx >= INTEL_PMC_IDX_FIXED) {
+ idx -= INTEL_PMC_IDX_FIXED;
idx |= 1 << 30;
}
@@ -1649,7 +1612,12 @@
struct device_attribute *attr,
const char *buf, size_t count)
{
- unsigned long val = simple_strtoul(buf, NULL, 0);
+ unsigned long val;
+ ssize_t ret;
+
+ ret = kstrtoul(buf, 0, &val);
+ if (ret)
+ return ret;
if (!!val != !!x86_pmu.attr_rdpmc) {
x86_pmu.attr_rdpmc = !!val;
@@ -1682,13 +1650,20 @@
x86_pmu.flush_branch_stack();
}
+void perf_check_microcode(void)
+{
+ if (x86_pmu.check_microcode)
+ x86_pmu.check_microcode();
+}
+EXPORT_SYMBOL_GPL(perf_check_microcode);
+
static struct pmu pmu = {
.pmu_enable = x86_pmu_enable,
.pmu_disable = x86_pmu_disable,
- .attr_groups = x86_pmu_attr_groups,
+ .attr_groups = x86_pmu_attr_groups,
- .event_init = x86_pmu_event_init,
+ .event_init = x86_pmu_event_init,
.add = x86_pmu_add,
.del = x86_pmu_del,
@@ -1696,11 +1671,11 @@
.stop = x86_pmu_stop,
.read = x86_pmu_read,
- .start_txn = x86_pmu_start_txn,
- .cancel_txn = x86_pmu_cancel_txn,
- .commit_txn = x86_pmu_commit_txn,
+ .start_txn = x86_pmu_start_txn,
+ .cancel_txn = x86_pmu_cancel_txn,
+ .commit_txn = x86_pmu_commit_txn,
- .event_idx = x86_pmu_event_idx,
+ .event_idx = x86_pmu_event_idx,
.flush_branch_stack = x86_pmu_flush_branch_stack,
};
@@ -1863,7 +1838,7 @@
else
misc |= PERF_RECORD_MISC_GUEST_KERNEL;
} else {
- if (user_mode(regs))
+ if (!kernel_ip(regs->ip))
misc |= PERF_RECORD_MISC_USER;
else
misc |= PERF_RECORD_MISC_KERNEL;
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index 7241e2f..a15df4b 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -14,6 +14,18 @@
#include <linux/perf_event.h>
+#if 0
+#undef wrmsrl
+#define wrmsrl(msr, val) \
+do { \
+ unsigned int _msr = (msr); \
+ u64 _val = (val); \
+ trace_printk("wrmsrl(%x, %Lx)\n", (unsigned int)(_msr), \
+ (unsigned long long)(_val)); \
+ native_write_msr((_msr), (u32)(_val), (u32)(_val >> 32)); \
+} while (0)
+#endif
+
/*
* | NHM/WSM | SNB |
* register -------------------------------
@@ -57,7 +69,7 @@
};
/* The maximal number of PEBS events: */
-#define MAX_PEBS_EVENTS 4
+#define MAX_PEBS_EVENTS 8
/*
* A debug store configuration.
@@ -349,6 +361,8 @@
void (*cpu_starting)(int cpu);
void (*cpu_dying)(int cpu);
void (*cpu_dead)(int cpu);
+
+ void (*check_microcode)(void);
void (*flush_branch_stack)(void);
/*
@@ -360,12 +374,16 @@
/*
* Intel DebugStore bits
*/
- int bts, pebs;
- int bts_active, pebs_active;
+ int bts :1,
+ bts_active :1,
+ pebs :1,
+ pebs_active :1,
+ pebs_broken :1;
int pebs_record_size;
void (*drain_pebs)(struct pt_regs *regs);
struct event_constraint *pebs_constraints;
void (*pebs_aliases)(struct perf_event *event);
+ int max_pebs_events;
/*
* Intel LBR
@@ -468,6 +486,8 @@
void x86_pmu_enable_all(int added);
+int perf_assign_events(struct event_constraint **constraints, int n,
+ int wmin, int wmax, int *assign);
int x86_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign);
void x86_pmu_stop(struct perf_event *event, int flags);
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
index 11a4eb9..4528ae7 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -366,7 +366,7 @@
cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY;
- if (boot_cpu_data.x86_max_cores < 2 || boot_cpu_data.x86 == 0x15)
+ if (boot_cpu_data.x86_max_cores < 2)
return;
nb_id = amd_get_nb_id(cpu);
@@ -422,35 +422,6 @@
NULL,
};
-static __initconst const struct x86_pmu amd_pmu = {
- .name = "AMD",
- .handle_irq = x86_pmu_handle_irq,
- .disable_all = x86_pmu_disable_all,
- .enable_all = x86_pmu_enable_all,
- .enable = x86_pmu_enable_event,
- .disable = x86_pmu_disable_event,
- .hw_config = amd_pmu_hw_config,
- .schedule_events = x86_schedule_events,
- .eventsel = MSR_K7_EVNTSEL0,
- .perfctr = MSR_K7_PERFCTR0,
- .event_map = amd_pmu_event_map,
- .max_events = ARRAY_SIZE(amd_perfmon_event_map),
- .num_counters = AMD64_NUM_COUNTERS,
- .cntval_bits = 48,
- .cntval_mask = (1ULL << 48) - 1,
- .apic = 1,
- /* use highest bit to detect overflow */
- .max_period = (1ULL << 47) - 1,
- .get_event_constraints = amd_get_event_constraints,
- .put_event_constraints = amd_put_event_constraints,
-
- .format_attrs = amd_format_attr,
-
- .cpu_prepare = amd_pmu_cpu_prepare,
- .cpu_starting = amd_pmu_cpu_starting,
- .cpu_dead = amd_pmu_cpu_dead,
-};
-
/* AMD Family 15h */
#define AMD_EVENT_TYPE_MASK 0x000000F0ULL
@@ -597,8 +568,8 @@
}
}
-static __initconst const struct x86_pmu amd_pmu_f15h = {
- .name = "AMD Family 15h",
+static __initconst const struct x86_pmu amd_pmu = {
+ .name = "AMD",
.handle_irq = x86_pmu_handle_irq,
.disable_all = x86_pmu_disable_all,
.enable_all = x86_pmu_enable_all,
@@ -606,50 +577,68 @@
.disable = x86_pmu_disable_event,
.hw_config = amd_pmu_hw_config,
.schedule_events = x86_schedule_events,
- .eventsel = MSR_F15H_PERF_CTL,
- .perfctr = MSR_F15H_PERF_CTR,
+ .eventsel = MSR_K7_EVNTSEL0,
+ .perfctr = MSR_K7_PERFCTR0,
.event_map = amd_pmu_event_map,
.max_events = ARRAY_SIZE(amd_perfmon_event_map),
- .num_counters = AMD64_NUM_COUNTERS_F15H,
+ .num_counters = AMD64_NUM_COUNTERS,
.cntval_bits = 48,
.cntval_mask = (1ULL << 48) - 1,
.apic = 1,
/* use highest bit to detect overflow */
.max_period = (1ULL << 47) - 1,
- .get_event_constraints = amd_get_event_constraints_f15h,
- /* nortbridge counters not yet implemented: */
-#if 0
+ .get_event_constraints = amd_get_event_constraints,
.put_event_constraints = amd_put_event_constraints,
- .cpu_prepare = amd_pmu_cpu_prepare,
- .cpu_dead = amd_pmu_cpu_dead,
-#endif
- .cpu_starting = amd_pmu_cpu_starting,
.format_attrs = amd_format_attr,
+
+ .cpu_prepare = amd_pmu_cpu_prepare,
+ .cpu_starting = amd_pmu_cpu_starting,
+ .cpu_dead = amd_pmu_cpu_dead,
};
+static int setup_event_constraints(void)
+{
+ if (boot_cpu_data.x86 >= 0x15)
+ x86_pmu.get_event_constraints = amd_get_event_constraints_f15h;
+ return 0;
+}
+
+static int setup_perfctr_core(void)
+{
+ if (!cpu_has_perfctr_core) {
+ WARN(x86_pmu.get_event_constraints == amd_get_event_constraints_f15h,
+ KERN_ERR "Odd, counter constraints enabled but no core perfctrs detected!");
+ return -ENODEV;
+ }
+
+ WARN(x86_pmu.get_event_constraints == amd_get_event_constraints,
+ KERN_ERR "hw perf events core counters need constraints handler!");
+
+ /*
+ * If core performance counter extensions exists, we must use
+ * MSR_F15H_PERF_CTL/MSR_F15H_PERF_CTR msrs. See also
+ * x86_pmu_addr_offset().
+ */
+ x86_pmu.eventsel = MSR_F15H_PERF_CTL;
+ x86_pmu.perfctr = MSR_F15H_PERF_CTR;
+ x86_pmu.num_counters = AMD64_NUM_COUNTERS_CORE;
+
+ printk(KERN_INFO "perf: AMD core performance counters detected\n");
+
+ return 0;
+}
+
__init int amd_pmu_init(void)
{
/* Performance-monitoring supported from K7 and later: */
if (boot_cpu_data.x86 < 6)
return -ENODEV;
- /*
- * If core performance counter extensions exists, it must be
- * family 15h, otherwise fail. See x86_pmu_addr_offset().
- */
- switch (boot_cpu_data.x86) {
- case 0x15:
- if (!cpu_has_perfctr_core)
- return -ENODEV;
- x86_pmu = amd_pmu_f15h;
- break;
- default:
- if (cpu_has_perfctr_core)
- return -ENODEV;
- x86_pmu = amd_pmu;
- break;
- }
+ x86_pmu = amd_pmu;
+
+ setup_event_constraints();
+ setup_perfctr_core();
/* Events are common for all AMDs */
memcpy(hw_cache_event_ids, amd_hw_cache_event_ids,
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 187c294..7a8b9d0 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -5,6 +5,8 @@
* among events on a single PMU.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/stddef.h>
#include <linux/types.h>
#include <linux/init.h>
@@ -21,14 +23,14 @@
*/
static u64 intel_perfmon_event_map[PERF_COUNT_HW_MAX] __read_mostly =
{
- [PERF_COUNT_HW_CPU_CYCLES] = 0x003c,
- [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0,
- [PERF_COUNT_HW_CACHE_REFERENCES] = 0x4f2e,
- [PERF_COUNT_HW_CACHE_MISSES] = 0x412e,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4,
- [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5,
- [PERF_COUNT_HW_BUS_CYCLES] = 0x013c,
- [PERF_COUNT_HW_REF_CPU_CYCLES] = 0x0300, /* pseudo-encoding */
+ [PERF_COUNT_HW_CPU_CYCLES] = 0x003c,
+ [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = 0x4f2e,
+ [PERF_COUNT_HW_CACHE_MISSES] = 0x412e,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4,
+ [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5,
+ [PERF_COUNT_HW_BUS_CYCLES] = 0x013c,
+ [PERF_COUNT_HW_REF_CPU_CYCLES] = 0x0300, /* pseudo-encoding */
};
static struct event_constraint intel_core_event_constraints[] __read_mostly =
@@ -747,7 +749,7 @@
wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
- if (test_bit(X86_PMC_IDX_FIXED_BTS, cpuc->active_mask))
+ if (test_bit(INTEL_PMC_IDX_FIXED_BTS, cpuc->active_mask))
intel_pmu_disable_bts();
intel_pmu_pebs_disable_all();
@@ -763,9 +765,9 @@
wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL,
x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_guest_mask);
- if (test_bit(X86_PMC_IDX_FIXED_BTS, cpuc->active_mask)) {
+ if (test_bit(INTEL_PMC_IDX_FIXED_BTS, cpuc->active_mask)) {
struct perf_event *event =
- cpuc->events[X86_PMC_IDX_FIXED_BTS];
+ cpuc->events[INTEL_PMC_IDX_FIXED_BTS];
if (WARN_ON_ONCE(!event))
return;
@@ -871,7 +873,7 @@
static void intel_pmu_disable_fixed(struct hw_perf_event *hwc)
{
- int idx = hwc->idx - X86_PMC_IDX_FIXED;
+ int idx = hwc->idx - INTEL_PMC_IDX_FIXED;
u64 ctrl_val, mask;
mask = 0xfULL << (idx * 4);
@@ -886,7 +888,7 @@
struct hw_perf_event *hwc = &event->hw;
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- if (unlikely(hwc->idx == X86_PMC_IDX_FIXED_BTS)) {
+ if (unlikely(hwc->idx == INTEL_PMC_IDX_FIXED_BTS)) {
intel_pmu_disable_bts();
intel_pmu_drain_bts_buffer();
return;
@@ -915,7 +917,7 @@
static void intel_pmu_enable_fixed(struct hw_perf_event *hwc)
{
- int idx = hwc->idx - X86_PMC_IDX_FIXED;
+ int idx = hwc->idx - INTEL_PMC_IDX_FIXED;
u64 ctrl_val, bits, mask;
/*
@@ -949,7 +951,7 @@
struct hw_perf_event *hwc = &event->hw;
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- if (unlikely(hwc->idx == X86_PMC_IDX_FIXED_BTS)) {
+ if (unlikely(hwc->idx == INTEL_PMC_IDX_FIXED_BTS)) {
if (!__this_cpu_read(cpu_hw_events.enabled))
return;
@@ -1000,14 +1002,14 @@
local_irq_save(flags);
- printk("clearing PMU state on CPU#%d\n", smp_processor_id());
+ pr_info("clearing PMU state on CPU#%d\n", smp_processor_id());
for (idx = 0; idx < x86_pmu.num_counters; idx++) {
- checking_wrmsrl(x86_pmu_config_addr(idx), 0ull);
- checking_wrmsrl(x86_pmu_event_addr(idx), 0ull);
+ wrmsrl_safe(x86_pmu_config_addr(idx), 0ull);
+ wrmsrl_safe(x86_pmu_event_addr(idx), 0ull);
}
for (idx = 0; idx < x86_pmu.num_counters_fixed; idx++)
- checking_wrmsrl(MSR_ARCH_PERFMON_FIXED_CTR0 + idx, 0ull);
+ wrmsrl_safe(MSR_ARCH_PERFMON_FIXED_CTR0 + idx, 0ull);
if (ds)
ds->bts_index = ds->bts_buffer_base;
@@ -1707,16 +1709,61 @@
* But taken together it might just make sense to not enable PEBS on
* these chips.
*/
- printk(KERN_WARNING "PEBS disabled due to CPU errata.\n");
+ pr_warn("PEBS disabled due to CPU errata\n");
x86_pmu.pebs = 0;
x86_pmu.pebs_constraints = NULL;
}
+static int intel_snb_pebs_broken(int cpu)
+{
+ u32 rev = UINT_MAX; /* default to broken for unknown models */
+
+ switch (cpu_data(cpu).x86_model) {
+ case 42: /* SNB */
+ rev = 0x28;
+ break;
+
+ case 45: /* SNB-EP */
+ switch (cpu_data(cpu).x86_mask) {
+ case 6: rev = 0x618; break;
+ case 7: rev = 0x70c; break;
+ }
+ }
+
+ return (cpu_data(cpu).microcode < rev);
+}
+
+static void intel_snb_check_microcode(void)
+{
+ int pebs_broken = 0;
+ int cpu;
+
+ get_online_cpus();
+ for_each_online_cpu(cpu) {
+ if ((pebs_broken = intel_snb_pebs_broken(cpu)))
+ break;
+ }
+ put_online_cpus();
+
+ if (pebs_broken == x86_pmu.pebs_broken)
+ return;
+
+ /*
+ * Serialized by the microcode lock..
+ */
+ if (x86_pmu.pebs_broken) {
+ pr_info("PEBS enabled due to microcode update\n");
+ x86_pmu.pebs_broken = 0;
+ } else {
+ pr_info("PEBS disabled due to CPU errata, please upgrade microcode\n");
+ x86_pmu.pebs_broken = 1;
+ }
+}
+
static __init void intel_sandybridge_quirk(void)
{
- printk(KERN_WARNING "PEBS disabled due to CPU errata.\n");
- x86_pmu.pebs = 0;
- x86_pmu.pebs_constraints = NULL;
+ x86_pmu.check_microcode = intel_snb_check_microcode;
+ intel_snb_check_microcode();
}
static const struct { int id; char *name; } intel_arch_events_map[] __initconst = {
@@ -1736,8 +1783,8 @@
/* disable event that reported as not presend by cpuid */
for_each_set_bit(bit, x86_pmu.events_mask, ARRAY_SIZE(intel_arch_events_map)) {
intel_perfmon_event_map[intel_arch_events_map[bit].id] = 0;
- printk(KERN_WARNING "CPUID marked event: \'%s\' unavailable\n",
- intel_arch_events_map[bit].name);
+ pr_warn("CPUID marked event: \'%s\' unavailable\n",
+ intel_arch_events_map[bit].name);
}
}
@@ -1756,7 +1803,7 @@
intel_perfmon_event_map[PERF_COUNT_HW_BRANCH_MISSES] = 0x7f89;
ebx.split.no_branch_misses_retired = 0;
x86_pmu.events_maskl = ebx.full;
- printk(KERN_INFO "CPU erratum AAJ80 worked around\n");
+ pr_info("CPU erratum AAJ80 worked around\n");
}
}
@@ -1765,6 +1812,7 @@
union cpuid10_edx edx;
union cpuid10_eax eax;
union cpuid10_ebx ebx;
+ struct event_constraint *c;
unsigned int unused;
int version;
@@ -1800,6 +1848,8 @@
x86_pmu.events_maskl = ebx.full;
x86_pmu.events_mask_len = eax.split.mask_length;
+ x86_pmu.max_pebs_events = min_t(unsigned, MAX_PEBS_EVENTS, x86_pmu.num_counters);
+
/*
* Quirk: v2 perfmon does not report fixed-purpose events, so
* assume at least 3 events:
@@ -1951,5 +2001,37 @@
}
}
+ if (x86_pmu.num_counters > INTEL_PMC_MAX_GENERIC) {
+ WARN(1, KERN_ERR "hw perf events %d > max(%d), clipping!",
+ x86_pmu.num_counters, INTEL_PMC_MAX_GENERIC);
+ x86_pmu.num_counters = INTEL_PMC_MAX_GENERIC;
+ }
+ x86_pmu.intel_ctrl = (1 << x86_pmu.num_counters) - 1;
+
+ if (x86_pmu.num_counters_fixed > INTEL_PMC_MAX_FIXED) {
+ WARN(1, KERN_ERR "hw perf events fixed %d > max(%d), clipping!",
+ x86_pmu.num_counters_fixed, INTEL_PMC_MAX_FIXED);
+ x86_pmu.num_counters_fixed = INTEL_PMC_MAX_FIXED;
+ }
+
+ x86_pmu.intel_ctrl |=
+ ((1LL << x86_pmu.num_counters_fixed)-1) << INTEL_PMC_IDX_FIXED;
+
+ if (x86_pmu.event_constraints) {
+ /*
+ * event on fixed counter2 (REF_CYCLES) only works on this
+ * counter, so do not extend mask to generic counters
+ */
+ for_each_event_constraint(c, x86_pmu.event_constraints) {
+ if (c->cmask != X86_RAW_EVENT_MASK
+ || c->idxmsk64 == INTEL_PMC_MSK_FIXED_REF_CYCLES) {
+ continue;
+ }
+
+ c->idxmsk64 |= (1ULL << x86_pmu.num_counters) - 1;
+ c->weight += x86_pmu.num_counters;
+ }
+ }
+
return 0;
}
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index 35e2192..629ae0b 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -248,7 +248,7 @@
*/
struct event_constraint bts_constraint =
- EVENT_CONSTRAINT(0, 1ULL << X86_PMC_IDX_FIXED_BTS, 0);
+ EVENT_CONSTRAINT(0, 1ULL << INTEL_PMC_IDX_FIXED_BTS, 0);
void intel_pmu_enable_bts(u64 config)
{
@@ -295,7 +295,7 @@
u64 to;
u64 flags;
};
- struct perf_event *event = cpuc->events[X86_PMC_IDX_FIXED_BTS];
+ struct perf_event *event = cpuc->events[INTEL_PMC_IDX_FIXED_BTS];
struct bts_record *at, *top;
struct perf_output_handle handle;
struct perf_event_header header;
@@ -620,7 +620,7 @@
* Should not happen, we program the threshold at 1 and do not
* set a reset value.
*/
- WARN_ON_ONCE(n > 1);
+ WARN_ONCE(n > 1, "bad leftover pebs %d\n", n);
at += n - 1;
__intel_pmu_pebs_event(event, iregs, at);
@@ -651,10 +651,10 @@
* Should not happen, we program the threshold at 1 and do not
* set a reset value.
*/
- WARN_ON_ONCE(n > MAX_PEBS_EVENTS);
+ WARN_ONCE(n > x86_pmu.max_pebs_events, "Unexpected number of pebs records %d\n", n);
for ( ; at < top; at++) {
- for_each_set_bit(bit, (unsigned long *)&at->status, MAX_PEBS_EVENTS) {
+ for_each_set_bit(bit, (unsigned long *)&at->status, x86_pmu.max_pebs_events) {
event = cpuc->events[bit];
if (!test_bit(bit, cpuc->active_mask))
continue;
@@ -670,7 +670,7 @@
break;
}
- if (!event || bit >= MAX_PEBS_EVENTS)
+ if (!event || bit >= x86_pmu.max_pebs_events)
continue;
__intel_pmu_pebs_event(event, iregs, at);
diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c
new file mode 100644
index 0000000..19faffc
--- /dev/null
+++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c
@@ -0,0 +1,1850 @@
+#include "perf_event_intel_uncore.h"
+
+static struct intel_uncore_type *empty_uncore[] = { NULL, };
+static struct intel_uncore_type **msr_uncores = empty_uncore;
+static struct intel_uncore_type **pci_uncores = empty_uncore;
+/* pci bus to socket mapping */
+static int pcibus_to_physid[256] = { [0 ... 255] = -1, };
+
+static DEFINE_RAW_SPINLOCK(uncore_box_lock);
+
+/* mask of cpus that collect uncore events */
+static cpumask_t uncore_cpu_mask;
+
+/* constraint for the fixed counter */
+static struct event_constraint constraint_fixed =
+ EVENT_CONSTRAINT(~0ULL, 1 << UNCORE_PMC_IDX_FIXED, ~0ULL);
+static struct event_constraint constraint_empty =
+ EVENT_CONSTRAINT(0, 0, 0);
+
+DEFINE_UNCORE_FORMAT_ATTR(event, event, "config:0-7");
+DEFINE_UNCORE_FORMAT_ATTR(umask, umask, "config:8-15");
+DEFINE_UNCORE_FORMAT_ATTR(edge, edge, "config:18");
+DEFINE_UNCORE_FORMAT_ATTR(tid_en, tid_en, "config:19");
+DEFINE_UNCORE_FORMAT_ATTR(inv, inv, "config:23");
+DEFINE_UNCORE_FORMAT_ATTR(cmask5, cmask, "config:24-28");
+DEFINE_UNCORE_FORMAT_ATTR(cmask8, cmask, "config:24-31");
+DEFINE_UNCORE_FORMAT_ATTR(thresh8, thresh, "config:24-31");
+DEFINE_UNCORE_FORMAT_ATTR(thresh5, thresh, "config:24-28");
+DEFINE_UNCORE_FORMAT_ATTR(occ_sel, occ_sel, "config:14-15");
+DEFINE_UNCORE_FORMAT_ATTR(occ_invert, occ_invert, "config:30");
+DEFINE_UNCORE_FORMAT_ATTR(occ_edge, occ_edge, "config:14-51");
+DEFINE_UNCORE_FORMAT_ATTR(filter_tid, filter_tid, "config1:0-4");
+DEFINE_UNCORE_FORMAT_ATTR(filter_nid, filter_nid, "config1:10-17");
+DEFINE_UNCORE_FORMAT_ATTR(filter_state, filter_state, "config1:18-22");
+DEFINE_UNCORE_FORMAT_ATTR(filter_opc, filter_opc, "config1:23-31");
+DEFINE_UNCORE_FORMAT_ATTR(filter_brand0, filter_brand0, "config1:0-7");
+DEFINE_UNCORE_FORMAT_ATTR(filter_brand1, filter_brand1, "config1:8-15");
+DEFINE_UNCORE_FORMAT_ATTR(filter_brand2, filter_brand2, "config1:16-23");
+DEFINE_UNCORE_FORMAT_ATTR(filter_brand3, filter_brand3, "config1:24-31");
+
+/* Sandy Bridge-EP uncore support */
+static struct intel_uncore_type snbep_uncore_cbox;
+static struct intel_uncore_type snbep_uncore_pcu;
+
+static void snbep_uncore_pci_disable_box(struct intel_uncore_box *box)
+{
+ struct pci_dev *pdev = box->pci_dev;
+ int box_ctl = uncore_pci_box_ctl(box);
+ u32 config;
+
+ pci_read_config_dword(pdev, box_ctl, &config);
+ config |= SNBEP_PMON_BOX_CTL_FRZ;
+ pci_write_config_dword(pdev, box_ctl, config);
+}
+
+static void snbep_uncore_pci_enable_box(struct intel_uncore_box *box)
+{
+ struct pci_dev *pdev = box->pci_dev;
+ int box_ctl = uncore_pci_box_ctl(box);
+ u32 config;
+
+ pci_read_config_dword(pdev, box_ctl, &config);
+ config &= ~SNBEP_PMON_BOX_CTL_FRZ;
+ pci_write_config_dword(pdev, box_ctl, config);
+}
+
+static void snbep_uncore_pci_enable_event(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ struct pci_dev *pdev = box->pci_dev;
+ struct hw_perf_event *hwc = &event->hw;
+
+ pci_write_config_dword(pdev, hwc->config_base, hwc->config |
+ SNBEP_PMON_CTL_EN);
+}
+
+static void snbep_uncore_pci_disable_event(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ struct pci_dev *pdev = box->pci_dev;
+ struct hw_perf_event *hwc = &event->hw;
+
+ pci_write_config_dword(pdev, hwc->config_base, hwc->config);
+}
+
+static u64 snbep_uncore_pci_read_counter(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ struct pci_dev *pdev = box->pci_dev;
+ struct hw_perf_event *hwc = &event->hw;
+ u64 count;
+
+ pci_read_config_dword(pdev, hwc->event_base, (u32 *)&count);
+ pci_read_config_dword(pdev, hwc->event_base + 4, (u32 *)&count + 1);
+ return count;
+}
+
+static void snbep_uncore_pci_init_box(struct intel_uncore_box *box)
+{
+ struct pci_dev *pdev = box->pci_dev;
+ pci_write_config_dword(pdev, SNBEP_PCI_PMON_BOX_CTL,
+ SNBEP_PMON_BOX_CTL_INT);
+}
+
+static void snbep_uncore_msr_disable_box(struct intel_uncore_box *box)
+{
+ u64 config;
+ unsigned msr;
+
+ msr = uncore_msr_box_ctl(box);
+ if (msr) {
+ rdmsrl(msr, config);
+ config |= SNBEP_PMON_BOX_CTL_FRZ;
+ wrmsrl(msr, config);
+ return;
+ }
+}
+
+static void snbep_uncore_msr_enable_box(struct intel_uncore_box *box)
+{
+ u64 config;
+ unsigned msr;
+
+ msr = uncore_msr_box_ctl(box);
+ if (msr) {
+ rdmsrl(msr, config);
+ config &= ~SNBEP_PMON_BOX_CTL_FRZ;
+ wrmsrl(msr, config);
+ return;
+ }
+}
+
+static void snbep_uncore_msr_enable_event(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ struct hw_perf_event_extra *reg1 = &hwc->extra_reg;
+
+ if (reg1->idx != EXTRA_REG_NONE)
+ wrmsrl(reg1->reg, reg1->config);
+
+ wrmsrl(hwc->config_base, hwc->config | SNBEP_PMON_CTL_EN);
+}
+
+static void snbep_uncore_msr_disable_event(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ wrmsrl(hwc->config_base, hwc->config);
+}
+
+static u64 snbep_uncore_msr_read_counter(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ u64 count;
+
+ rdmsrl(hwc->event_base, count);
+ return count;
+}
+
+static void snbep_uncore_msr_init_box(struct intel_uncore_box *box)
+{
+ unsigned msr = uncore_msr_box_ctl(box);
+ if (msr)
+ wrmsrl(msr, SNBEP_PMON_BOX_CTL_INT);
+}
+
+static struct event_constraint *
+snbep_uncore_get_constraint(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ struct intel_uncore_extra_reg *er;
+ struct hw_perf_event_extra *reg1 = &event->hw.extra_reg;
+ unsigned long flags;
+ bool ok = false;
+
+ if (reg1->idx == EXTRA_REG_NONE || (box->phys_id >= 0 && reg1->alloc))
+ return NULL;
+
+ er = &box->shared_regs[reg1->idx];
+ raw_spin_lock_irqsave(&er->lock, flags);
+ if (!atomic_read(&er->ref) || er->config1 == reg1->config) {
+ atomic_inc(&er->ref);
+ er->config1 = reg1->config;
+ ok = true;
+ }
+ raw_spin_unlock_irqrestore(&er->lock, flags);
+
+ if (ok) {
+ if (box->phys_id >= 0)
+ reg1->alloc = 1;
+ return NULL;
+ }
+ return &constraint_empty;
+}
+
+static void snbep_uncore_put_constraint(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ struct intel_uncore_extra_reg *er;
+ struct hw_perf_event_extra *reg1 = &event->hw.extra_reg;
+
+ if (box->phys_id < 0 || !reg1->alloc)
+ return;
+
+ er = &box->shared_regs[reg1->idx];
+ atomic_dec(&er->ref);
+ reg1->alloc = 0;
+}
+
+static int snbep_uncore_hw_config(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ struct hw_perf_event_extra *reg1 = &hwc->extra_reg;
+
+ if (box->pmu->type == &snbep_uncore_cbox) {
+ reg1->reg = SNBEP_C0_MSR_PMON_BOX_FILTER +
+ SNBEP_CBO_MSR_OFFSET * box->pmu->pmu_idx;
+ reg1->config = event->attr.config1 &
+ SNBEP_CB0_MSR_PMON_BOX_FILTER_MASK;
+ } else if (box->pmu->type == &snbep_uncore_pcu) {
+ reg1->reg = SNBEP_PCU_MSR_PMON_BOX_FILTER;
+ reg1->config = event->attr.config1 &
+ SNBEP_PCU_MSR_PMON_BOX_FILTER_MASK;
+ } else {
+ return 0;
+ }
+ reg1->idx = 0;
+ return 0;
+}
+
+static struct attribute *snbep_uncore_formats_attr[] = {
+ &format_attr_event.attr,
+ &format_attr_umask.attr,
+ &format_attr_edge.attr,
+ &format_attr_inv.attr,
+ &format_attr_thresh8.attr,
+ NULL,
+};
+
+static struct attribute *snbep_uncore_ubox_formats_attr[] = {
+ &format_attr_event.attr,
+ &format_attr_umask.attr,
+ &format_attr_edge.attr,
+ &format_attr_inv.attr,
+ &format_attr_thresh5.attr,
+ NULL,
+};
+
+static struct attribute *snbep_uncore_cbox_formats_attr[] = {
+ &format_attr_event.attr,
+ &format_attr_umask.attr,
+ &format_attr_edge.attr,
+ &format_attr_tid_en.attr,
+ &format_attr_inv.attr,
+ &format_attr_thresh8.attr,
+ &format_attr_filter_tid.attr,
+ &format_attr_filter_nid.attr,
+ &format_attr_filter_state.attr,
+ &format_attr_filter_opc.attr,
+ NULL,
+};
+
+static struct attribute *snbep_uncore_pcu_formats_attr[] = {
+ &format_attr_event.attr,
+ &format_attr_occ_sel.attr,
+ &format_attr_edge.attr,
+ &format_attr_inv.attr,
+ &format_attr_thresh5.attr,
+ &format_attr_occ_invert.attr,
+ &format_attr_occ_edge.attr,
+ &format_attr_filter_brand0.attr,
+ &format_attr_filter_brand1.attr,
+ &format_attr_filter_brand2.attr,
+ &format_attr_filter_brand3.attr,
+ NULL,
+};
+
+static struct uncore_event_desc snbep_uncore_imc_events[] = {
+ INTEL_UNCORE_EVENT_DESC(clockticks, "event=0xff,umask=0x00"),
+ INTEL_UNCORE_EVENT_DESC(cas_count_read, "event=0x04,umask=0x03"),
+ INTEL_UNCORE_EVENT_DESC(cas_count_write, "event=0x04,umask=0x0c"),
+ { /* end: all zeroes */ },
+};
+
+static struct uncore_event_desc snbep_uncore_qpi_events[] = {
+ INTEL_UNCORE_EVENT_DESC(clockticks, "event=0x14"),
+ INTEL_UNCORE_EVENT_DESC(txl_flits_active, "event=0x00,umask=0x06"),
+ INTEL_UNCORE_EVENT_DESC(drs_data, "event=0x02,umask=0x08"),
+ INTEL_UNCORE_EVENT_DESC(ncb_data, "event=0x03,umask=0x04"),
+ { /* end: all zeroes */ },
+};
+
+static struct attribute_group snbep_uncore_format_group = {
+ .name = "format",
+ .attrs = snbep_uncore_formats_attr,
+};
+
+static struct attribute_group snbep_uncore_ubox_format_group = {
+ .name = "format",
+ .attrs = snbep_uncore_ubox_formats_attr,
+};
+
+static struct attribute_group snbep_uncore_cbox_format_group = {
+ .name = "format",
+ .attrs = snbep_uncore_cbox_formats_attr,
+};
+
+static struct attribute_group snbep_uncore_pcu_format_group = {
+ .name = "format",
+ .attrs = snbep_uncore_pcu_formats_attr,
+};
+
+static struct intel_uncore_ops snbep_uncore_msr_ops = {
+ .init_box = snbep_uncore_msr_init_box,
+ .disable_box = snbep_uncore_msr_disable_box,
+ .enable_box = snbep_uncore_msr_enable_box,
+ .disable_event = snbep_uncore_msr_disable_event,
+ .enable_event = snbep_uncore_msr_enable_event,
+ .read_counter = snbep_uncore_msr_read_counter,
+ .get_constraint = snbep_uncore_get_constraint,
+ .put_constraint = snbep_uncore_put_constraint,
+ .hw_config = snbep_uncore_hw_config,
+};
+
+static struct intel_uncore_ops snbep_uncore_pci_ops = {
+ .init_box = snbep_uncore_pci_init_box,
+ .disable_box = snbep_uncore_pci_disable_box,
+ .enable_box = snbep_uncore_pci_enable_box,
+ .disable_event = snbep_uncore_pci_disable_event,
+ .enable_event = snbep_uncore_pci_enable_event,
+ .read_counter = snbep_uncore_pci_read_counter,
+};
+
+static struct event_constraint snbep_uncore_cbox_constraints[] = {
+ UNCORE_EVENT_CONSTRAINT(0x01, 0x1),
+ UNCORE_EVENT_CONSTRAINT(0x02, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x04, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x05, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x07, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x11, 0x1),
+ UNCORE_EVENT_CONSTRAINT(0x12, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x13, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x1b, 0xc),
+ UNCORE_EVENT_CONSTRAINT(0x1c, 0xc),
+ UNCORE_EVENT_CONSTRAINT(0x1d, 0xc),
+ UNCORE_EVENT_CONSTRAINT(0x1e, 0xc),
+ EVENT_CONSTRAINT_OVERLAP(0x1f, 0xe, 0xff),
+ UNCORE_EVENT_CONSTRAINT(0x21, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x23, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x31, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x32, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x33, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x34, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x35, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x36, 0x1),
+ UNCORE_EVENT_CONSTRAINT(0x37, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x38, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x39, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x3b, 0x1),
+ EVENT_CONSTRAINT_END
+};
+
+static struct event_constraint snbep_uncore_r2pcie_constraints[] = {
+ UNCORE_EVENT_CONSTRAINT(0x10, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x11, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x12, 0x1),
+ UNCORE_EVENT_CONSTRAINT(0x23, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x24, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x25, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x26, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x32, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x33, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x34, 0x3),
+ EVENT_CONSTRAINT_END
+};
+
+static struct event_constraint snbep_uncore_r3qpi_constraints[] = {
+ UNCORE_EVENT_CONSTRAINT(0x10, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x11, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x12, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x13, 0x1),
+ UNCORE_EVENT_CONSTRAINT(0x20, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x21, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x22, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x23, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x24, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x25, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x26, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x30, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x31, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x32, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x33, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x34, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x36, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x37, 0x3),
+ EVENT_CONSTRAINT_END
+};
+
+static struct intel_uncore_type snbep_uncore_ubox = {
+ .name = "ubox",
+ .num_counters = 2,
+ .num_boxes = 1,
+ .perf_ctr_bits = 44,
+ .fixed_ctr_bits = 48,
+ .perf_ctr = SNBEP_U_MSR_PMON_CTR0,
+ .event_ctl = SNBEP_U_MSR_PMON_CTL0,
+ .event_mask = SNBEP_U_MSR_PMON_RAW_EVENT_MASK,
+ .fixed_ctr = SNBEP_U_MSR_PMON_UCLK_FIXED_CTR,
+ .fixed_ctl = SNBEP_U_MSR_PMON_UCLK_FIXED_CTL,
+ .ops = &snbep_uncore_msr_ops,
+ .format_group = &snbep_uncore_ubox_format_group,
+};
+
+static struct intel_uncore_type snbep_uncore_cbox = {
+ .name = "cbox",
+ .num_counters = 4,
+ .num_boxes = 8,
+ .perf_ctr_bits = 44,
+ .event_ctl = SNBEP_C0_MSR_PMON_CTL0,
+ .perf_ctr = SNBEP_C0_MSR_PMON_CTR0,
+ .event_mask = SNBEP_CBO_MSR_PMON_RAW_EVENT_MASK,
+ .box_ctl = SNBEP_C0_MSR_PMON_BOX_CTL,
+ .msr_offset = SNBEP_CBO_MSR_OFFSET,
+ .num_shared_regs = 1,
+ .constraints = snbep_uncore_cbox_constraints,
+ .ops = &snbep_uncore_msr_ops,
+ .format_group = &snbep_uncore_cbox_format_group,
+};
+
+static struct intel_uncore_type snbep_uncore_pcu = {
+ .name = "pcu",
+ .num_counters = 4,
+ .num_boxes = 1,
+ .perf_ctr_bits = 48,
+ .perf_ctr = SNBEP_PCU_MSR_PMON_CTR0,
+ .event_ctl = SNBEP_PCU_MSR_PMON_CTL0,
+ .event_mask = SNBEP_PCU_MSR_PMON_RAW_EVENT_MASK,
+ .box_ctl = SNBEP_PCU_MSR_PMON_BOX_CTL,
+ .num_shared_regs = 1,
+ .ops = &snbep_uncore_msr_ops,
+ .format_group = &snbep_uncore_pcu_format_group,
+};
+
+static struct intel_uncore_type *snbep_msr_uncores[] = {
+ &snbep_uncore_ubox,
+ &snbep_uncore_cbox,
+ &snbep_uncore_pcu,
+ NULL,
+};
+
+#define SNBEP_UNCORE_PCI_COMMON_INIT() \
+ .perf_ctr = SNBEP_PCI_PMON_CTR0, \
+ .event_ctl = SNBEP_PCI_PMON_CTL0, \
+ .event_mask = SNBEP_PMON_RAW_EVENT_MASK, \
+ .box_ctl = SNBEP_PCI_PMON_BOX_CTL, \
+ .ops = &snbep_uncore_pci_ops, \
+ .format_group = &snbep_uncore_format_group
+
+static struct intel_uncore_type snbep_uncore_ha = {
+ .name = "ha",
+ .num_counters = 4,
+ .num_boxes = 1,
+ .perf_ctr_bits = 48,
+ SNBEP_UNCORE_PCI_COMMON_INIT(),
+};
+
+static struct intel_uncore_type snbep_uncore_imc = {
+ .name = "imc",
+ .num_counters = 4,
+ .num_boxes = 4,
+ .perf_ctr_bits = 48,
+ .fixed_ctr_bits = 48,
+ .fixed_ctr = SNBEP_MC_CHy_PCI_PMON_FIXED_CTR,
+ .fixed_ctl = SNBEP_MC_CHy_PCI_PMON_FIXED_CTL,
+ .event_descs = snbep_uncore_imc_events,
+ SNBEP_UNCORE_PCI_COMMON_INIT(),
+};
+
+static struct intel_uncore_type snbep_uncore_qpi = {
+ .name = "qpi",
+ .num_counters = 4,
+ .num_boxes = 2,
+ .perf_ctr_bits = 48,
+ .event_descs = snbep_uncore_qpi_events,
+ SNBEP_UNCORE_PCI_COMMON_INIT(),
+};
+
+
+static struct intel_uncore_type snbep_uncore_r2pcie = {
+ .name = "r2pcie",
+ .num_counters = 4,
+ .num_boxes = 1,
+ .perf_ctr_bits = 44,
+ .constraints = snbep_uncore_r2pcie_constraints,
+ SNBEP_UNCORE_PCI_COMMON_INIT(),
+};
+
+static struct intel_uncore_type snbep_uncore_r3qpi = {
+ .name = "r3qpi",
+ .num_counters = 3,
+ .num_boxes = 2,
+ .perf_ctr_bits = 44,
+ .constraints = snbep_uncore_r3qpi_constraints,
+ SNBEP_UNCORE_PCI_COMMON_INIT(),
+};
+
+static struct intel_uncore_type *snbep_pci_uncores[] = {
+ &snbep_uncore_ha,
+ &snbep_uncore_imc,
+ &snbep_uncore_qpi,
+ &snbep_uncore_r2pcie,
+ &snbep_uncore_r3qpi,
+ NULL,
+};
+
+static DEFINE_PCI_DEVICE_TABLE(snbep_uncore_pci_ids) = {
+ { /* Home Agent */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_HA),
+ .driver_data = (unsigned long)&snbep_uncore_ha,
+ },
+ { /* MC Channel 0 */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_IMC0),
+ .driver_data = (unsigned long)&snbep_uncore_imc,
+ },
+ { /* MC Channel 1 */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_IMC1),
+ .driver_data = (unsigned long)&snbep_uncore_imc,
+ },
+ { /* MC Channel 2 */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_IMC2),
+ .driver_data = (unsigned long)&snbep_uncore_imc,
+ },
+ { /* MC Channel 3 */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_IMC3),
+ .driver_data = (unsigned long)&snbep_uncore_imc,
+ },
+ { /* QPI Port 0 */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_QPI0),
+ .driver_data = (unsigned long)&snbep_uncore_qpi,
+ },
+ { /* QPI Port 1 */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_QPI1),
+ .driver_data = (unsigned long)&snbep_uncore_qpi,
+ },
+ { /* P2PCIe */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_R2PCIE),
+ .driver_data = (unsigned long)&snbep_uncore_r2pcie,
+ },
+ { /* R3QPI Link 0 */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_R3QPI0),
+ .driver_data = (unsigned long)&snbep_uncore_r3qpi,
+ },
+ { /* R3QPI Link 1 */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_R3QPI1),
+ .driver_data = (unsigned long)&snbep_uncore_r3qpi,
+ },
+ { /* end: all zeroes */ }
+};
+
+static struct pci_driver snbep_uncore_pci_driver = {
+ .name = "snbep_uncore",
+ .id_table = snbep_uncore_pci_ids,
+};
+
+/*
+ * build pci bus to socket mapping
+ */
+static void snbep_pci2phy_map_init(void)
+{
+ struct pci_dev *ubox_dev = NULL;
+ int i, bus, nodeid;
+ u32 config;
+
+ while (1) {
+ /* find the UBOX device */
+ ubox_dev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_JAKETOWN_UBOX,
+ ubox_dev);
+ if (!ubox_dev)
+ break;
+ bus = ubox_dev->bus->number;
+ /* get the Node ID of the local register */
+ pci_read_config_dword(ubox_dev, 0x40, &config);
+ nodeid = config;
+ /* get the Node ID mapping */
+ pci_read_config_dword(ubox_dev, 0x54, &config);
+ /*
+ * every three bits in the Node ID mapping register maps
+ * to a particular node.
+ */
+ for (i = 0; i < 8; i++) {
+ if (nodeid == ((config >> (3 * i)) & 0x7)) {
+ pcibus_to_physid[bus] = i;
+ break;
+ }
+ }
+ };
+ return;
+}
+/* end of Sandy Bridge-EP uncore support */
+
+
+/* Sandy Bridge uncore support */
+static void snb_uncore_msr_enable_event(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ if (hwc->idx < UNCORE_PMC_IDX_FIXED)
+ wrmsrl(hwc->config_base, hwc->config | SNB_UNC_CTL_EN);
+ else
+ wrmsrl(hwc->config_base, SNB_UNC_CTL_EN);
+}
+
+static void snb_uncore_msr_disable_event(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ wrmsrl(event->hw.config_base, 0);
+}
+
+static u64 snb_uncore_msr_read_counter(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ u64 count;
+ rdmsrl(event->hw.event_base, count);
+ return count;
+}
+
+static void snb_uncore_msr_init_box(struct intel_uncore_box *box)
+{
+ if (box->pmu->pmu_idx == 0) {
+ wrmsrl(SNB_UNC_PERF_GLOBAL_CTL,
+ SNB_UNC_GLOBAL_CTL_EN | SNB_UNC_GLOBAL_CTL_CORE_ALL);
+ }
+}
+
+static struct attribute *snb_uncore_formats_attr[] = {
+ &format_attr_event.attr,
+ &format_attr_umask.attr,
+ &format_attr_edge.attr,
+ &format_attr_inv.attr,
+ &format_attr_cmask5.attr,
+ NULL,
+};
+
+static struct attribute_group snb_uncore_format_group = {
+ .name = "format",
+ .attrs = snb_uncore_formats_attr,
+};
+
+static struct intel_uncore_ops snb_uncore_msr_ops = {
+ .init_box = snb_uncore_msr_init_box,
+ .disable_event = snb_uncore_msr_disable_event,
+ .enable_event = snb_uncore_msr_enable_event,
+ .read_counter = snb_uncore_msr_read_counter,
+};
+
+static struct event_constraint snb_uncore_cbox_constraints[] = {
+ UNCORE_EVENT_CONSTRAINT(0x80, 0x1),
+ UNCORE_EVENT_CONSTRAINT(0x83, 0x1),
+ EVENT_CONSTRAINT_END
+};
+
+static struct intel_uncore_type snb_uncore_cbox = {
+ .name = "cbox",
+ .num_counters = 2,
+ .num_boxes = 4,
+ .perf_ctr_bits = 44,
+ .fixed_ctr_bits = 48,
+ .perf_ctr = SNB_UNC_CBO_0_PER_CTR0,
+ .event_ctl = SNB_UNC_CBO_0_PERFEVTSEL0,
+ .fixed_ctr = SNB_UNC_FIXED_CTR,
+ .fixed_ctl = SNB_UNC_FIXED_CTR_CTRL,
+ .single_fixed = 1,
+ .event_mask = SNB_UNC_RAW_EVENT_MASK,
+ .msr_offset = SNB_UNC_CBO_MSR_OFFSET,
+ .constraints = snb_uncore_cbox_constraints,
+ .ops = &snb_uncore_msr_ops,
+ .format_group = &snb_uncore_format_group,
+};
+
+static struct intel_uncore_type *snb_msr_uncores[] = {
+ &snb_uncore_cbox,
+ NULL,
+};
+/* end of Sandy Bridge uncore support */
+
+/* Nehalem uncore support */
+static void nhm_uncore_msr_disable_box(struct intel_uncore_box *box)
+{
+ wrmsrl(NHM_UNC_PERF_GLOBAL_CTL, 0);
+}
+
+static void nhm_uncore_msr_enable_box(struct intel_uncore_box *box)
+{
+ wrmsrl(NHM_UNC_PERF_GLOBAL_CTL,
+ NHM_UNC_GLOBAL_CTL_EN_PC_ALL | NHM_UNC_GLOBAL_CTL_EN_FC);
+}
+
+static void nhm_uncore_msr_enable_event(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ if (hwc->idx < UNCORE_PMC_IDX_FIXED)
+ wrmsrl(hwc->config_base, hwc->config | SNB_UNC_CTL_EN);
+ else
+ wrmsrl(hwc->config_base, NHM_UNC_FIXED_CTR_CTL_EN);
+}
+
+static struct attribute *nhm_uncore_formats_attr[] = {
+ &format_attr_event.attr,
+ &format_attr_umask.attr,
+ &format_attr_edge.attr,
+ &format_attr_inv.attr,
+ &format_attr_cmask8.attr,
+ NULL,
+};
+
+static struct attribute_group nhm_uncore_format_group = {
+ .name = "format",
+ .attrs = nhm_uncore_formats_attr,
+};
+
+static struct uncore_event_desc nhm_uncore_events[] = {
+ INTEL_UNCORE_EVENT_DESC(clockticks, "event=0xff,umask=0x00"),
+ INTEL_UNCORE_EVENT_DESC(qmc_writes_full_any, "event=0x2f,umask=0x0f"),
+ INTEL_UNCORE_EVENT_DESC(qmc_normal_reads_any, "event=0x2c,umask=0x0f"),
+ INTEL_UNCORE_EVENT_DESC(qhl_request_ioh_reads, "event=0x20,umask=0x01"),
+ INTEL_UNCORE_EVENT_DESC(qhl_request_ioh_writes, "event=0x20,umask=0x02"),
+ INTEL_UNCORE_EVENT_DESC(qhl_request_remote_reads, "event=0x20,umask=0x04"),
+ INTEL_UNCORE_EVENT_DESC(qhl_request_remote_writes, "event=0x20,umask=0x08"),
+ INTEL_UNCORE_EVENT_DESC(qhl_request_local_reads, "event=0x20,umask=0x10"),
+ INTEL_UNCORE_EVENT_DESC(qhl_request_local_writes, "event=0x20,umask=0x20"),
+ { /* end: all zeroes */ },
+};
+
+static struct intel_uncore_ops nhm_uncore_msr_ops = {
+ .disable_box = nhm_uncore_msr_disable_box,
+ .enable_box = nhm_uncore_msr_enable_box,
+ .disable_event = snb_uncore_msr_disable_event,
+ .enable_event = nhm_uncore_msr_enable_event,
+ .read_counter = snb_uncore_msr_read_counter,
+};
+
+static struct intel_uncore_type nhm_uncore = {
+ .name = "",
+ .num_counters = 8,
+ .num_boxes = 1,
+ .perf_ctr_bits = 48,
+ .fixed_ctr_bits = 48,
+ .event_ctl = NHM_UNC_PERFEVTSEL0,
+ .perf_ctr = NHM_UNC_UNCORE_PMC0,
+ .fixed_ctr = NHM_UNC_FIXED_CTR,
+ .fixed_ctl = NHM_UNC_FIXED_CTR_CTRL,
+ .event_mask = NHM_UNC_RAW_EVENT_MASK,
+ .event_descs = nhm_uncore_events,
+ .ops = &nhm_uncore_msr_ops,
+ .format_group = &nhm_uncore_format_group,
+};
+
+static struct intel_uncore_type *nhm_msr_uncores[] = {
+ &nhm_uncore,
+ NULL,
+};
+/* end of Nehalem uncore support */
+
+static void uncore_assign_hw_event(struct intel_uncore_box *box,
+ struct perf_event *event, int idx)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ hwc->idx = idx;
+ hwc->last_tag = ++box->tags[idx];
+
+ if (hwc->idx == UNCORE_PMC_IDX_FIXED) {
+ hwc->event_base = uncore_fixed_ctr(box);
+ hwc->config_base = uncore_fixed_ctl(box);
+ return;
+ }
+
+ hwc->config_base = uncore_event_ctl(box, hwc->idx);
+ hwc->event_base = uncore_perf_ctr(box, hwc->idx);
+}
+
+static void uncore_perf_event_update(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ u64 prev_count, new_count, delta;
+ int shift;
+
+ if (event->hw.idx >= UNCORE_PMC_IDX_FIXED)
+ shift = 64 - uncore_fixed_ctr_bits(box);
+ else
+ shift = 64 - uncore_perf_ctr_bits(box);
+
+ /* the hrtimer might modify the previous event value */
+again:
+ prev_count = local64_read(&event->hw.prev_count);
+ new_count = uncore_read_counter(box, event);
+ if (local64_xchg(&event->hw.prev_count, new_count) != prev_count)
+ goto again;
+
+ delta = (new_count << shift) - (prev_count << shift);
+ delta >>= shift;
+
+ local64_add(delta, &event->count);
+}
+
+/*
+ * The overflow interrupt is unavailable for SandyBridge-EP, is broken
+ * for SandyBridge. So we use hrtimer to periodically poll the counter
+ * to avoid overflow.
+ */
+static enum hrtimer_restart uncore_pmu_hrtimer(struct hrtimer *hrtimer)
+{
+ struct intel_uncore_box *box;
+ unsigned long flags;
+ int bit;
+
+ box = container_of(hrtimer, struct intel_uncore_box, hrtimer);
+ if (!box->n_active || box->cpu != smp_processor_id())
+ return HRTIMER_NORESTART;
+ /*
+ * disable local interrupt to prevent uncore_pmu_event_start/stop
+ * to interrupt the update process
+ */
+ local_irq_save(flags);
+
+ for_each_set_bit(bit, box->active_mask, UNCORE_PMC_IDX_MAX)
+ uncore_perf_event_update(box, box->events[bit]);
+
+ local_irq_restore(flags);
+
+ hrtimer_forward_now(hrtimer, ns_to_ktime(UNCORE_PMU_HRTIMER_INTERVAL));
+ return HRTIMER_RESTART;
+}
+
+static void uncore_pmu_start_hrtimer(struct intel_uncore_box *box)
+{
+ __hrtimer_start_range_ns(&box->hrtimer,
+ ns_to_ktime(UNCORE_PMU_HRTIMER_INTERVAL), 0,
+ HRTIMER_MODE_REL_PINNED, 0);
+}
+
+static void uncore_pmu_cancel_hrtimer(struct intel_uncore_box *box)
+{
+ hrtimer_cancel(&box->hrtimer);
+}
+
+static void uncore_pmu_init_hrtimer(struct intel_uncore_box *box)
+{
+ hrtimer_init(&box->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ box->hrtimer.function = uncore_pmu_hrtimer;
+}
+
+struct intel_uncore_box *uncore_alloc_box(struct intel_uncore_type *type,
+ int cpu)
+{
+ struct intel_uncore_box *box;
+ int i, size;
+
+ size = sizeof(*box) + type->num_shared_regs *
+ sizeof(struct intel_uncore_extra_reg);
+
+ box = kmalloc_node(size, GFP_KERNEL | __GFP_ZERO, cpu_to_node(cpu));
+ if (!box)
+ return NULL;
+
+ for (i = 0; i < type->num_shared_regs; i++)
+ raw_spin_lock_init(&box->shared_regs[i].lock);
+
+ uncore_pmu_init_hrtimer(box);
+ atomic_set(&box->refcnt, 1);
+ box->cpu = -1;
+ box->phys_id = -1;
+
+ return box;
+}
+
+static struct intel_uncore_box *
+uncore_pmu_to_box(struct intel_uncore_pmu *pmu, int cpu)
+{
+ static struct intel_uncore_box *box;
+
+ box = *per_cpu_ptr(pmu->box, cpu);
+ if (box)
+ return box;
+
+ raw_spin_lock(&uncore_box_lock);
+ list_for_each_entry(box, &pmu->box_list, list) {
+ if (box->phys_id == topology_physical_package_id(cpu)) {
+ atomic_inc(&box->refcnt);
+ *per_cpu_ptr(pmu->box, cpu) = box;
+ break;
+ }
+ }
+ raw_spin_unlock(&uncore_box_lock);
+
+ return *per_cpu_ptr(pmu->box, cpu);
+}
+
+static struct intel_uncore_pmu *uncore_event_to_pmu(struct perf_event *event)
+{
+ return container_of(event->pmu, struct intel_uncore_pmu, pmu);
+}
+
+static struct intel_uncore_box *uncore_event_to_box(struct perf_event *event)
+{
+ /*
+ * perf core schedules event on the basis of cpu, uncore events are
+ * collected by one of the cpus inside a physical package.
+ */
+ return uncore_pmu_to_box(uncore_event_to_pmu(event),
+ smp_processor_id());
+}
+
+static int uncore_collect_events(struct intel_uncore_box *box,
+ struct perf_event *leader, bool dogrp)
+{
+ struct perf_event *event;
+ int n, max_count;
+
+ max_count = box->pmu->type->num_counters;
+ if (box->pmu->type->fixed_ctl)
+ max_count++;
+
+ if (box->n_events >= max_count)
+ return -EINVAL;
+
+ n = box->n_events;
+ box->event_list[n] = leader;
+ n++;
+ if (!dogrp)
+ return n;
+
+ list_for_each_entry(event, &leader->sibling_list, group_entry) {
+ if (event->state <= PERF_EVENT_STATE_OFF)
+ continue;
+
+ if (n >= max_count)
+ return -EINVAL;
+
+ box->event_list[n] = event;
+ n++;
+ }
+ return n;
+}
+
+static struct event_constraint *
+uncore_get_event_constraint(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ struct intel_uncore_type *type = box->pmu->type;
+ struct event_constraint *c;
+
+ if (type->ops->get_constraint) {
+ c = type->ops->get_constraint(box, event);
+ if (c)
+ return c;
+ }
+
+ if (event->hw.config == ~0ULL)
+ return &constraint_fixed;
+
+ if (type->constraints) {
+ for_each_event_constraint(c, type->constraints) {
+ if ((event->hw.config & c->cmask) == c->code)
+ return c;
+ }
+ }
+
+ return &type->unconstrainted;
+}
+
+static void uncore_put_event_constraint(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ if (box->pmu->type->ops->put_constraint)
+ box->pmu->type->ops->put_constraint(box, event);
+}
+
+static int uncore_assign_events(struct intel_uncore_box *box,
+ int assign[], int n)
+{
+ unsigned long used_mask[BITS_TO_LONGS(UNCORE_PMC_IDX_MAX)];
+ struct event_constraint *c, *constraints[UNCORE_PMC_IDX_MAX];
+ int i, wmin, wmax, ret = 0;
+ struct hw_perf_event *hwc;
+
+ bitmap_zero(used_mask, UNCORE_PMC_IDX_MAX);
+
+ for (i = 0, wmin = UNCORE_PMC_IDX_MAX, wmax = 0; i < n; i++) {
+ c = uncore_get_event_constraint(box, box->event_list[i]);
+ constraints[i] = c;
+ wmin = min(wmin, c->weight);
+ wmax = max(wmax, c->weight);
+ }
+
+ /* fastpath, try to reuse previous register */
+ for (i = 0; i < n; i++) {
+ hwc = &box->event_list[i]->hw;
+ c = constraints[i];
+
+ /* never assigned */
+ if (hwc->idx == -1)
+ break;
+
+ /* constraint still honored */
+ if (!test_bit(hwc->idx, c->idxmsk))
+ break;
+
+ /* not already used */
+ if (test_bit(hwc->idx, used_mask))
+ break;
+
+ __set_bit(hwc->idx, used_mask);
+ if (assign)
+ assign[i] = hwc->idx;
+ }
+ /* slow path */
+ if (i != n)
+ ret = perf_assign_events(constraints, n, wmin, wmax, assign);
+
+ if (!assign || ret) {
+ for (i = 0; i < n; i++)
+ uncore_put_event_constraint(box, box->event_list[i]);
+ }
+ return ret ? -EINVAL : 0;
+}
+
+static void uncore_pmu_event_start(struct perf_event *event, int flags)
+{
+ struct intel_uncore_box *box = uncore_event_to_box(event);
+ int idx = event->hw.idx;
+
+ if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED)))
+ return;
+
+ if (WARN_ON_ONCE(idx == -1 || idx >= UNCORE_PMC_IDX_MAX))
+ return;
+
+ event->hw.state = 0;
+ box->events[idx] = event;
+ box->n_active++;
+ __set_bit(idx, box->active_mask);
+
+ local64_set(&event->hw.prev_count, uncore_read_counter(box, event));
+ uncore_enable_event(box, event);
+
+ if (box->n_active == 1) {
+ uncore_enable_box(box);
+ uncore_pmu_start_hrtimer(box);
+ }
+}
+
+static void uncore_pmu_event_stop(struct perf_event *event, int flags)
+{
+ struct intel_uncore_box *box = uncore_event_to_box(event);
+ struct hw_perf_event *hwc = &event->hw;
+
+ if (__test_and_clear_bit(hwc->idx, box->active_mask)) {
+ uncore_disable_event(box, event);
+ box->n_active--;
+ box->events[hwc->idx] = NULL;
+ WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
+ hwc->state |= PERF_HES_STOPPED;
+
+ if (box->n_active == 0) {
+ uncore_disable_box(box);
+ uncore_pmu_cancel_hrtimer(box);
+ }
+ }
+
+ if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
+ /*
+ * Drain the remaining delta count out of a event
+ * that we are disabling:
+ */
+ uncore_perf_event_update(box, event);
+ hwc->state |= PERF_HES_UPTODATE;
+ }
+}
+
+static int uncore_pmu_event_add(struct perf_event *event, int flags)
+{
+ struct intel_uncore_box *box = uncore_event_to_box(event);
+ struct hw_perf_event *hwc = &event->hw;
+ int assign[UNCORE_PMC_IDX_MAX];
+ int i, n, ret;
+
+ if (!box)
+ return -ENODEV;
+
+ ret = n = uncore_collect_events(box, event, false);
+ if (ret < 0)
+ return ret;
+
+ hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
+ if (!(flags & PERF_EF_START))
+ hwc->state |= PERF_HES_ARCH;
+
+ ret = uncore_assign_events(box, assign, n);
+ if (ret)
+ return ret;
+
+ /* save events moving to new counters */
+ for (i = 0; i < box->n_events; i++) {
+ event = box->event_list[i];
+ hwc = &event->hw;
+
+ if (hwc->idx == assign[i] &&
+ hwc->last_tag == box->tags[assign[i]])
+ continue;
+ /*
+ * Ensure we don't accidentally enable a stopped
+ * counter simply because we rescheduled.
+ */
+ if (hwc->state & PERF_HES_STOPPED)
+ hwc->state |= PERF_HES_ARCH;
+
+ uncore_pmu_event_stop(event, PERF_EF_UPDATE);
+ }
+
+ /* reprogram moved events into new counters */
+ for (i = 0; i < n; i++) {
+ event = box->event_list[i];
+ hwc = &event->hw;
+
+ if (hwc->idx != assign[i] ||
+ hwc->last_tag != box->tags[assign[i]])
+ uncore_assign_hw_event(box, event, assign[i]);
+ else if (i < box->n_events)
+ continue;
+
+ if (hwc->state & PERF_HES_ARCH)
+ continue;
+
+ uncore_pmu_event_start(event, 0);
+ }
+ box->n_events = n;
+
+ return 0;
+}
+
+static void uncore_pmu_event_del(struct perf_event *event, int flags)
+{
+ struct intel_uncore_box *box = uncore_event_to_box(event);
+ int i;
+
+ uncore_pmu_event_stop(event, PERF_EF_UPDATE);
+
+ for (i = 0; i < box->n_events; i++) {
+ if (event == box->event_list[i]) {
+ uncore_put_event_constraint(box, event);
+
+ while (++i < box->n_events)
+ box->event_list[i - 1] = box->event_list[i];
+
+ --box->n_events;
+ break;
+ }
+ }
+
+ event->hw.idx = -1;
+ event->hw.last_tag = ~0ULL;
+}
+
+static void uncore_pmu_event_read(struct perf_event *event)
+{
+ struct intel_uncore_box *box = uncore_event_to_box(event);
+ uncore_perf_event_update(box, event);
+}
+
+/*
+ * validation ensures the group can be loaded onto the
+ * PMU if it was the only group available.
+ */
+static int uncore_validate_group(struct intel_uncore_pmu *pmu,
+ struct perf_event *event)
+{
+ struct perf_event *leader = event->group_leader;
+ struct intel_uncore_box *fake_box;
+ int ret = -EINVAL, n;
+
+ fake_box = uncore_alloc_box(pmu->type, smp_processor_id());
+ if (!fake_box)
+ return -ENOMEM;
+
+ fake_box->pmu = pmu;
+ /*
+ * the event is not yet connected with its
+ * siblings therefore we must first collect
+ * existing siblings, then add the new event
+ * before we can simulate the scheduling
+ */
+ n = uncore_collect_events(fake_box, leader, true);
+ if (n < 0)
+ goto out;
+
+ fake_box->n_events = n;
+ n = uncore_collect_events(fake_box, event, false);
+ if (n < 0)
+ goto out;
+
+ fake_box->n_events = n;
+
+ ret = uncore_assign_events(fake_box, NULL, n);
+out:
+ kfree(fake_box);
+ return ret;
+}
+
+int uncore_pmu_event_init(struct perf_event *event)
+{
+ struct intel_uncore_pmu *pmu;
+ struct intel_uncore_box *box;
+ struct hw_perf_event *hwc = &event->hw;
+ int ret;
+
+ if (event->attr.type != event->pmu->type)
+ return -ENOENT;
+
+ pmu = uncore_event_to_pmu(event);
+ /* no device found for this pmu */
+ if (pmu->func_id < 0)
+ return -ENOENT;
+
+ /*
+ * Uncore PMU does measure at all privilege level all the time.
+ * So it doesn't make sense to specify any exclude bits.
+ */
+ if (event->attr.exclude_user || event->attr.exclude_kernel ||
+ event->attr.exclude_hv || event->attr.exclude_idle)
+ return -EINVAL;
+
+ /* Sampling not supported yet */
+ if (hwc->sample_period)
+ return -EINVAL;
+
+ /*
+ * Place all uncore events for a particular physical package
+ * onto a single cpu
+ */
+ if (event->cpu < 0)
+ return -EINVAL;
+ box = uncore_pmu_to_box(pmu, event->cpu);
+ if (!box || box->cpu < 0)
+ return -EINVAL;
+ event->cpu = box->cpu;
+
+ event->hw.idx = -1;
+ event->hw.last_tag = ~0ULL;
+ event->hw.extra_reg.idx = EXTRA_REG_NONE;
+
+ if (event->attr.config == UNCORE_FIXED_EVENT) {
+ /* no fixed counter */
+ if (!pmu->type->fixed_ctl)
+ return -EINVAL;
+ /*
+ * if there is only one fixed counter, only the first pmu
+ * can access the fixed counter
+ */
+ if (pmu->type->single_fixed && pmu->pmu_idx > 0)
+ return -EINVAL;
+ hwc->config = ~0ULL;
+ } else {
+ hwc->config = event->attr.config & pmu->type->event_mask;
+ if (pmu->type->ops->hw_config) {
+ ret = pmu->type->ops->hw_config(box, event);
+ if (ret)
+ return ret;
+ }
+ }
+
+ if (event->group_leader != event)
+ ret = uncore_validate_group(pmu, event);
+ else
+ ret = 0;
+
+ return ret;
+}
+
+static int __init uncore_pmu_register(struct intel_uncore_pmu *pmu)
+{
+ int ret;
+
+ pmu->pmu = (struct pmu) {
+ .attr_groups = pmu->type->attr_groups,
+ .task_ctx_nr = perf_invalid_context,
+ .event_init = uncore_pmu_event_init,
+ .add = uncore_pmu_event_add,
+ .del = uncore_pmu_event_del,
+ .start = uncore_pmu_event_start,
+ .stop = uncore_pmu_event_stop,
+ .read = uncore_pmu_event_read,
+ };
+
+ if (pmu->type->num_boxes == 1) {
+ if (strlen(pmu->type->name) > 0)
+ sprintf(pmu->name, "uncore_%s", pmu->type->name);
+ else
+ sprintf(pmu->name, "uncore");
+ } else {
+ sprintf(pmu->name, "uncore_%s_%d", pmu->type->name,
+ pmu->pmu_idx);
+ }
+
+ ret = perf_pmu_register(&pmu->pmu, pmu->name, -1);
+ return ret;
+}
+
+static void __init uncore_type_exit(struct intel_uncore_type *type)
+{
+ int i;
+
+ for (i = 0; i < type->num_boxes; i++)
+ free_percpu(type->pmus[i].box);
+ kfree(type->pmus);
+ type->pmus = NULL;
+ kfree(type->attr_groups[1]);
+ type->attr_groups[1] = NULL;
+}
+
+static void uncore_types_exit(struct intel_uncore_type **types)
+{
+ int i;
+ for (i = 0; types[i]; i++)
+ uncore_type_exit(types[i]);
+}
+
+static int __init uncore_type_init(struct intel_uncore_type *type)
+{
+ struct intel_uncore_pmu *pmus;
+ struct attribute_group *events_group;
+ struct attribute **attrs;
+ int i, j;
+
+ pmus = kzalloc(sizeof(*pmus) * type->num_boxes, GFP_KERNEL);
+ if (!pmus)
+ return -ENOMEM;
+
+ type->unconstrainted = (struct event_constraint)
+ __EVENT_CONSTRAINT(0, (1ULL << type->num_counters) - 1,
+ 0, type->num_counters, 0);
+
+ for (i = 0; i < type->num_boxes; i++) {
+ pmus[i].func_id = -1;
+ pmus[i].pmu_idx = i;
+ pmus[i].type = type;
+ INIT_LIST_HEAD(&pmus[i].box_list);
+ pmus[i].box = alloc_percpu(struct intel_uncore_box *);
+ if (!pmus[i].box)
+ goto fail;
+ }
+
+ if (type->event_descs) {
+ i = 0;
+ while (type->event_descs[i].attr.attr.name)
+ i++;
+
+ events_group = kzalloc(sizeof(struct attribute *) * (i + 1) +
+ sizeof(*events_group), GFP_KERNEL);
+ if (!events_group)
+ goto fail;
+
+ attrs = (struct attribute **)(events_group + 1);
+ events_group->name = "events";
+ events_group->attrs = attrs;
+
+ for (j = 0; j < i; j++)
+ attrs[j] = &type->event_descs[j].attr.attr;
+
+ type->attr_groups[1] = events_group;
+ }
+
+ type->pmus = pmus;
+ return 0;
+fail:
+ uncore_type_exit(type);
+ return -ENOMEM;
+}
+
+static int __init uncore_types_init(struct intel_uncore_type **types)
+{
+ int i, ret;
+
+ for (i = 0; types[i]; i++) {
+ ret = uncore_type_init(types[i]);
+ if (ret)
+ goto fail;
+ }
+ return 0;
+fail:
+ while (--i >= 0)
+ uncore_type_exit(types[i]);
+ return ret;
+}
+
+static struct pci_driver *uncore_pci_driver;
+static bool pcidrv_registered;
+
+/*
+ * add a pci uncore device
+ */
+static int __devinit uncore_pci_add(struct intel_uncore_type *type,
+ struct pci_dev *pdev)
+{
+ struct intel_uncore_pmu *pmu;
+ struct intel_uncore_box *box;
+ int i, phys_id;
+
+ phys_id = pcibus_to_physid[pdev->bus->number];
+ if (phys_id < 0)
+ return -ENODEV;
+
+ box = uncore_alloc_box(type, 0);
+ if (!box)
+ return -ENOMEM;
+
+ /*
+ * for performance monitoring unit with multiple boxes,
+ * each box has a different function id.
+ */
+ for (i = 0; i < type->num_boxes; i++) {
+ pmu = &type->pmus[i];
+ if (pmu->func_id == pdev->devfn)
+ break;
+ if (pmu->func_id < 0) {
+ pmu->func_id = pdev->devfn;
+ break;
+ }
+ pmu = NULL;
+ }
+
+ if (!pmu) {
+ kfree(box);
+ return -EINVAL;
+ }
+
+ box->phys_id = phys_id;
+ box->pci_dev = pdev;
+ box->pmu = pmu;
+ uncore_box_init(box);
+ pci_set_drvdata(pdev, box);
+
+ raw_spin_lock(&uncore_box_lock);
+ list_add_tail(&box->list, &pmu->box_list);
+ raw_spin_unlock(&uncore_box_lock);
+
+ return 0;
+}
+
+static void uncore_pci_remove(struct pci_dev *pdev)
+{
+ struct intel_uncore_box *box = pci_get_drvdata(pdev);
+ struct intel_uncore_pmu *pmu = box->pmu;
+ int cpu, phys_id = pcibus_to_physid[pdev->bus->number];
+
+ if (WARN_ON_ONCE(phys_id != box->phys_id))
+ return;
+
+ raw_spin_lock(&uncore_box_lock);
+ list_del(&box->list);
+ raw_spin_unlock(&uncore_box_lock);
+
+ for_each_possible_cpu(cpu) {
+ if (*per_cpu_ptr(pmu->box, cpu) == box) {
+ *per_cpu_ptr(pmu->box, cpu) = NULL;
+ atomic_dec(&box->refcnt);
+ }
+ }
+
+ WARN_ON_ONCE(atomic_read(&box->refcnt) != 1);
+ kfree(box);
+}
+
+static int __devinit uncore_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct intel_uncore_type *type;
+
+ type = (struct intel_uncore_type *)id->driver_data;
+ return uncore_pci_add(type, pdev);
+}
+
+static int __init uncore_pci_init(void)
+{
+ int ret;
+
+ switch (boot_cpu_data.x86_model) {
+ case 45: /* Sandy Bridge-EP */
+ pci_uncores = snbep_pci_uncores;
+ uncore_pci_driver = &snbep_uncore_pci_driver;
+ snbep_pci2phy_map_init();
+ break;
+ default:
+ return 0;
+ }
+
+ ret = uncore_types_init(pci_uncores);
+ if (ret)
+ return ret;
+
+ uncore_pci_driver->probe = uncore_pci_probe;
+ uncore_pci_driver->remove = uncore_pci_remove;
+
+ ret = pci_register_driver(uncore_pci_driver);
+ if (ret == 0)
+ pcidrv_registered = true;
+ else
+ uncore_types_exit(pci_uncores);
+
+ return ret;
+}
+
+static void __init uncore_pci_exit(void)
+{
+ if (pcidrv_registered) {
+ pcidrv_registered = false;
+ pci_unregister_driver(uncore_pci_driver);
+ uncore_types_exit(pci_uncores);
+ }
+}
+
+static void __cpuinit uncore_cpu_dying(int cpu)
+{
+ struct intel_uncore_type *type;
+ struct intel_uncore_pmu *pmu;
+ struct intel_uncore_box *box;
+ int i, j;
+
+ for (i = 0; msr_uncores[i]; i++) {
+ type = msr_uncores[i];
+ for (j = 0; j < type->num_boxes; j++) {
+ pmu = &type->pmus[j];
+ box = *per_cpu_ptr(pmu->box, cpu);
+ *per_cpu_ptr(pmu->box, cpu) = NULL;
+ if (box && atomic_dec_and_test(&box->refcnt))
+ kfree(box);
+ }
+ }
+}
+
+static int __cpuinit uncore_cpu_starting(int cpu)
+{
+ struct intel_uncore_type *type;
+ struct intel_uncore_pmu *pmu;
+ struct intel_uncore_box *box, *exist;
+ int i, j, k, phys_id;
+
+ phys_id = topology_physical_package_id(cpu);
+
+ for (i = 0; msr_uncores[i]; i++) {
+ type = msr_uncores[i];
+ for (j = 0; j < type->num_boxes; j++) {
+ pmu = &type->pmus[j];
+ box = *per_cpu_ptr(pmu->box, cpu);
+ /* called by uncore_cpu_init? */
+ if (box && box->phys_id >= 0) {
+ uncore_box_init(box);
+ continue;
+ }
+
+ for_each_online_cpu(k) {
+ exist = *per_cpu_ptr(pmu->box, k);
+ if (exist && exist->phys_id == phys_id) {
+ atomic_inc(&exist->refcnt);
+ *per_cpu_ptr(pmu->box, cpu) = exist;
+ kfree(box);
+ box = NULL;
+ break;
+ }
+ }
+
+ if (box) {
+ box->phys_id = phys_id;
+ uncore_box_init(box);
+ }
+ }
+ }
+ return 0;
+}
+
+static int __cpuinit uncore_cpu_prepare(int cpu, int phys_id)
+{
+ struct intel_uncore_type *type;
+ struct intel_uncore_pmu *pmu;
+ struct intel_uncore_box *box;
+ int i, j;
+
+ for (i = 0; msr_uncores[i]; i++) {
+ type = msr_uncores[i];
+ for (j = 0; j < type->num_boxes; j++) {
+ pmu = &type->pmus[j];
+ if (pmu->func_id < 0)
+ pmu->func_id = j;
+
+ box = uncore_alloc_box(type, cpu);
+ if (!box)
+ return -ENOMEM;
+
+ box->pmu = pmu;
+ box->phys_id = phys_id;
+ *per_cpu_ptr(pmu->box, cpu) = box;
+ }
+ }
+ return 0;
+}
+
+static void __cpuinit uncore_change_context(struct intel_uncore_type **uncores,
+ int old_cpu, int new_cpu)
+{
+ struct intel_uncore_type *type;
+ struct intel_uncore_pmu *pmu;
+ struct intel_uncore_box *box;
+ int i, j;
+
+ for (i = 0; uncores[i]; i++) {
+ type = uncores[i];
+ for (j = 0; j < type->num_boxes; j++) {
+ pmu = &type->pmus[j];
+ if (old_cpu < 0)
+ box = uncore_pmu_to_box(pmu, new_cpu);
+ else
+ box = uncore_pmu_to_box(pmu, old_cpu);
+ if (!box)
+ continue;
+
+ if (old_cpu < 0) {
+ WARN_ON_ONCE(box->cpu != -1);
+ box->cpu = new_cpu;
+ continue;
+ }
+
+ WARN_ON_ONCE(box->cpu != old_cpu);
+ if (new_cpu >= 0) {
+ uncore_pmu_cancel_hrtimer(box);
+ perf_pmu_migrate_context(&pmu->pmu,
+ old_cpu, new_cpu);
+ box->cpu = new_cpu;
+ } else {
+ box->cpu = -1;
+ }
+ }
+ }
+}
+
+static void __cpuinit uncore_event_exit_cpu(int cpu)
+{
+ int i, phys_id, target;
+
+ /* if exiting cpu is used for collecting uncore events */
+ if (!cpumask_test_and_clear_cpu(cpu, &uncore_cpu_mask))
+ return;
+
+ /* find a new cpu to collect uncore events */
+ phys_id = topology_physical_package_id(cpu);
+ target = -1;
+ for_each_online_cpu(i) {
+ if (i == cpu)
+ continue;
+ if (phys_id == topology_physical_package_id(i)) {
+ target = i;
+ break;
+ }
+ }
+
+ /* migrate uncore events to the new cpu */
+ if (target >= 0)
+ cpumask_set_cpu(target, &uncore_cpu_mask);
+
+ uncore_change_context(msr_uncores, cpu, target);
+ uncore_change_context(pci_uncores, cpu, target);
+}
+
+static void __cpuinit uncore_event_init_cpu(int cpu)
+{
+ int i, phys_id;
+
+ phys_id = topology_physical_package_id(cpu);
+ for_each_cpu(i, &uncore_cpu_mask) {
+ if (phys_id == topology_physical_package_id(i))
+ return;
+ }
+
+ cpumask_set_cpu(cpu, &uncore_cpu_mask);
+
+ uncore_change_context(msr_uncores, -1, cpu);
+ uncore_change_context(pci_uncores, -1, cpu);
+}
+
+static int __cpuinit uncore_cpu_notifier(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (long)hcpu;
+
+ /* allocate/free data structure for uncore box */
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_UP_PREPARE:
+ uncore_cpu_prepare(cpu, -1);
+ break;
+ case CPU_STARTING:
+ uncore_cpu_starting(cpu);
+ break;
+ case CPU_UP_CANCELED:
+ case CPU_DYING:
+ uncore_cpu_dying(cpu);
+ break;
+ default:
+ break;
+ }
+
+ /* select the cpu that collects uncore events */
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_DOWN_FAILED:
+ case CPU_STARTING:
+ uncore_event_init_cpu(cpu);
+ break;
+ case CPU_DOWN_PREPARE:
+ uncore_event_exit_cpu(cpu);
+ break;
+ default:
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block uncore_cpu_nb __cpuinitdata = {
+ .notifier_call = uncore_cpu_notifier,
+ /*
+ * to migrate uncore events, our notifier should be executed
+ * before perf core's notifier.
+ */
+ .priority = CPU_PRI_PERF + 1,
+};
+
+static void __init uncore_cpu_setup(void *dummy)
+{
+ uncore_cpu_starting(smp_processor_id());
+}
+
+static int __init uncore_cpu_init(void)
+{
+ int ret, cpu, max_cores;
+
+ max_cores = boot_cpu_data.x86_max_cores;
+ switch (boot_cpu_data.x86_model) {
+ case 26: /* Nehalem */
+ case 30:
+ case 37: /* Westmere */
+ case 44:
+ msr_uncores = nhm_msr_uncores;
+ break;
+ case 42: /* Sandy Bridge */
+ if (snb_uncore_cbox.num_boxes > max_cores)
+ snb_uncore_cbox.num_boxes = max_cores;
+ msr_uncores = snb_msr_uncores;
+ break;
+ case 45: /* Sandy Birdge-EP */
+ if (snbep_uncore_cbox.num_boxes > max_cores)
+ snbep_uncore_cbox.num_boxes = max_cores;
+ msr_uncores = snbep_msr_uncores;
+ break;
+ default:
+ return 0;
+ }
+
+ ret = uncore_types_init(msr_uncores);
+ if (ret)
+ return ret;
+
+ get_online_cpus();
+
+ for_each_online_cpu(cpu) {
+ int i, phys_id = topology_physical_package_id(cpu);
+
+ for_each_cpu(i, &uncore_cpu_mask) {
+ if (phys_id == topology_physical_package_id(i)) {
+ phys_id = -1;
+ break;
+ }
+ }
+ if (phys_id < 0)
+ continue;
+
+ uncore_cpu_prepare(cpu, phys_id);
+ uncore_event_init_cpu(cpu);
+ }
+ on_each_cpu(uncore_cpu_setup, NULL, 1);
+
+ register_cpu_notifier(&uncore_cpu_nb);
+
+ put_online_cpus();
+
+ return 0;
+}
+
+static int __init uncore_pmus_register(void)
+{
+ struct intel_uncore_pmu *pmu;
+ struct intel_uncore_type *type;
+ int i, j;
+
+ for (i = 0; msr_uncores[i]; i++) {
+ type = msr_uncores[i];
+ for (j = 0; j < type->num_boxes; j++) {
+ pmu = &type->pmus[j];
+ uncore_pmu_register(pmu);
+ }
+ }
+
+ for (i = 0; pci_uncores[i]; i++) {
+ type = pci_uncores[i];
+ for (j = 0; j < type->num_boxes; j++) {
+ pmu = &type->pmus[j];
+ uncore_pmu_register(pmu);
+ }
+ }
+
+ return 0;
+}
+
+static int __init intel_uncore_init(void)
+{
+ int ret;
+
+ if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
+ return -ENODEV;
+
+ ret = uncore_pci_init();
+ if (ret)
+ goto fail;
+ ret = uncore_cpu_init();
+ if (ret) {
+ uncore_pci_exit();
+ goto fail;
+ }
+
+ uncore_pmus_register();
+ return 0;
+fail:
+ return ret;
+}
+device_initcall(intel_uncore_init);
diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.h b/arch/x86/kernel/cpu/perf_event_intel_uncore.h
new file mode 100644
index 0000000..b13e9ea
--- /dev/null
+++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.h
@@ -0,0 +1,424 @@
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/perf_event.h>
+#include "perf_event.h"
+
+#define UNCORE_PMU_NAME_LEN 32
+#define UNCORE_BOX_HASH_SIZE 8
+
+#define UNCORE_PMU_HRTIMER_INTERVAL (60 * NSEC_PER_SEC)
+
+#define UNCORE_FIXED_EVENT 0xff
+#define UNCORE_PMC_IDX_MAX_GENERIC 8
+#define UNCORE_PMC_IDX_FIXED UNCORE_PMC_IDX_MAX_GENERIC
+#define UNCORE_PMC_IDX_MAX (UNCORE_PMC_IDX_FIXED + 1)
+
+#define UNCORE_EVENT_CONSTRAINT(c, n) EVENT_CONSTRAINT(c, n, 0xff)
+
+/* SNB event control */
+#define SNB_UNC_CTL_EV_SEL_MASK 0x000000ff
+#define SNB_UNC_CTL_UMASK_MASK 0x0000ff00
+#define SNB_UNC_CTL_EDGE_DET (1 << 18)
+#define SNB_UNC_CTL_EN (1 << 22)
+#define SNB_UNC_CTL_INVERT (1 << 23)
+#define SNB_UNC_CTL_CMASK_MASK 0x1f000000
+#define NHM_UNC_CTL_CMASK_MASK 0xff000000
+#define NHM_UNC_FIXED_CTR_CTL_EN (1 << 0)
+
+#define SNB_UNC_RAW_EVENT_MASK (SNB_UNC_CTL_EV_SEL_MASK | \
+ SNB_UNC_CTL_UMASK_MASK | \
+ SNB_UNC_CTL_EDGE_DET | \
+ SNB_UNC_CTL_INVERT | \
+ SNB_UNC_CTL_CMASK_MASK)
+
+#define NHM_UNC_RAW_EVENT_MASK (SNB_UNC_CTL_EV_SEL_MASK | \
+ SNB_UNC_CTL_UMASK_MASK | \
+ SNB_UNC_CTL_EDGE_DET | \
+ SNB_UNC_CTL_INVERT | \
+ NHM_UNC_CTL_CMASK_MASK)
+
+/* SNB global control register */
+#define SNB_UNC_PERF_GLOBAL_CTL 0x391
+#define SNB_UNC_FIXED_CTR_CTRL 0x394
+#define SNB_UNC_FIXED_CTR 0x395
+
+/* SNB uncore global control */
+#define SNB_UNC_GLOBAL_CTL_CORE_ALL ((1 << 4) - 1)
+#define SNB_UNC_GLOBAL_CTL_EN (1 << 29)
+
+/* SNB Cbo register */
+#define SNB_UNC_CBO_0_PERFEVTSEL0 0x700
+#define SNB_UNC_CBO_0_PER_CTR0 0x706
+#define SNB_UNC_CBO_MSR_OFFSET 0x10
+
+/* NHM global control register */
+#define NHM_UNC_PERF_GLOBAL_CTL 0x391
+#define NHM_UNC_FIXED_CTR 0x394
+#define NHM_UNC_FIXED_CTR_CTRL 0x395
+
+/* NHM uncore global control */
+#define NHM_UNC_GLOBAL_CTL_EN_PC_ALL ((1ULL << 8) - 1)
+#define NHM_UNC_GLOBAL_CTL_EN_FC (1ULL << 32)
+
+/* NHM uncore register */
+#define NHM_UNC_PERFEVTSEL0 0x3c0
+#define NHM_UNC_UNCORE_PMC0 0x3b0
+
+/* SNB-EP Box level control */
+#define SNBEP_PMON_BOX_CTL_RST_CTRL (1 << 0)
+#define SNBEP_PMON_BOX_CTL_RST_CTRS (1 << 1)
+#define SNBEP_PMON_BOX_CTL_FRZ (1 << 8)
+#define SNBEP_PMON_BOX_CTL_FRZ_EN (1 << 16)
+#define SNBEP_PMON_BOX_CTL_INT (SNBEP_PMON_BOX_CTL_RST_CTRL | \
+ SNBEP_PMON_BOX_CTL_RST_CTRS | \
+ SNBEP_PMON_BOX_CTL_FRZ_EN)
+/* SNB-EP event control */
+#define SNBEP_PMON_CTL_EV_SEL_MASK 0x000000ff
+#define SNBEP_PMON_CTL_UMASK_MASK 0x0000ff00
+#define SNBEP_PMON_CTL_RST (1 << 17)
+#define SNBEP_PMON_CTL_EDGE_DET (1 << 18)
+#define SNBEP_PMON_CTL_EV_SEL_EXT (1 << 21) /* only for QPI */
+#define SNBEP_PMON_CTL_EN (1 << 22)
+#define SNBEP_PMON_CTL_INVERT (1 << 23)
+#define SNBEP_PMON_CTL_TRESH_MASK 0xff000000
+#define SNBEP_PMON_RAW_EVENT_MASK (SNBEP_PMON_CTL_EV_SEL_MASK | \
+ SNBEP_PMON_CTL_UMASK_MASK | \
+ SNBEP_PMON_CTL_EDGE_DET | \
+ SNBEP_PMON_CTL_INVERT | \
+ SNBEP_PMON_CTL_TRESH_MASK)
+
+/* SNB-EP Ubox event control */
+#define SNBEP_U_MSR_PMON_CTL_TRESH_MASK 0x1f000000
+#define SNBEP_U_MSR_PMON_RAW_EVENT_MASK \
+ (SNBEP_PMON_CTL_EV_SEL_MASK | \
+ SNBEP_PMON_CTL_UMASK_MASK | \
+ SNBEP_PMON_CTL_EDGE_DET | \
+ SNBEP_PMON_CTL_INVERT | \
+ SNBEP_U_MSR_PMON_CTL_TRESH_MASK)
+
+#define SNBEP_CBO_PMON_CTL_TID_EN (1 << 19)
+#define SNBEP_CBO_MSR_PMON_RAW_EVENT_MASK (SNBEP_PMON_RAW_EVENT_MASK | \
+ SNBEP_CBO_PMON_CTL_TID_EN)
+
+/* SNB-EP PCU event control */
+#define SNBEP_PCU_MSR_PMON_CTL_OCC_SEL_MASK 0x0000c000
+#define SNBEP_PCU_MSR_PMON_CTL_TRESH_MASK 0x1f000000
+#define SNBEP_PCU_MSR_PMON_CTL_OCC_INVERT (1 << 30)
+#define SNBEP_PCU_MSR_PMON_CTL_OCC_EDGE_DET (1 << 31)
+#define SNBEP_PCU_MSR_PMON_RAW_EVENT_MASK \
+ (SNBEP_PMON_CTL_EV_SEL_MASK | \
+ SNBEP_PCU_MSR_PMON_CTL_OCC_SEL_MASK | \
+ SNBEP_PMON_CTL_EDGE_DET | \
+ SNBEP_PMON_CTL_INVERT | \
+ SNBEP_PCU_MSR_PMON_CTL_TRESH_MASK | \
+ SNBEP_PCU_MSR_PMON_CTL_OCC_INVERT | \
+ SNBEP_PCU_MSR_PMON_CTL_OCC_EDGE_DET)
+
+/* SNB-EP pci control register */
+#define SNBEP_PCI_PMON_BOX_CTL 0xf4
+#define SNBEP_PCI_PMON_CTL0 0xd8
+/* SNB-EP pci counter register */
+#define SNBEP_PCI_PMON_CTR0 0xa0
+
+/* SNB-EP home agent register */
+#define SNBEP_HA_PCI_PMON_BOX_ADDRMATCH0 0x40
+#define SNBEP_HA_PCI_PMON_BOX_ADDRMATCH1 0x44
+#define SNBEP_HA_PCI_PMON_BOX_OPCODEMATCH 0x48
+/* SNB-EP memory controller register */
+#define SNBEP_MC_CHy_PCI_PMON_FIXED_CTL 0xf0
+#define SNBEP_MC_CHy_PCI_PMON_FIXED_CTR 0xd0
+/* SNB-EP QPI register */
+#define SNBEP_Q_Py_PCI_PMON_PKT_MATCH0 0x228
+#define SNBEP_Q_Py_PCI_PMON_PKT_MATCH1 0x22c
+#define SNBEP_Q_Py_PCI_PMON_PKT_MASK0 0x238
+#define SNBEP_Q_Py_PCI_PMON_PKT_MASK1 0x23c
+
+/* SNB-EP Ubox register */
+#define SNBEP_U_MSR_PMON_CTR0 0xc16
+#define SNBEP_U_MSR_PMON_CTL0 0xc10
+
+#define SNBEP_U_MSR_PMON_UCLK_FIXED_CTL 0xc08
+#define SNBEP_U_MSR_PMON_UCLK_FIXED_CTR 0xc09
+
+/* SNB-EP Cbo register */
+#define SNBEP_C0_MSR_PMON_CTR0 0xd16
+#define SNBEP_C0_MSR_PMON_CTL0 0xd10
+#define SNBEP_C0_MSR_PMON_BOX_CTL 0xd04
+#define SNBEP_C0_MSR_PMON_BOX_FILTER 0xd14
+#define SNBEP_CB0_MSR_PMON_BOX_FILTER_MASK 0xfffffc1f
+#define SNBEP_CBO_MSR_OFFSET 0x20
+
+/* SNB-EP PCU register */
+#define SNBEP_PCU_MSR_PMON_CTR0 0xc36
+#define SNBEP_PCU_MSR_PMON_CTL0 0xc30
+#define SNBEP_PCU_MSR_PMON_BOX_CTL 0xc24
+#define SNBEP_PCU_MSR_PMON_BOX_FILTER 0xc34
+#define SNBEP_PCU_MSR_PMON_BOX_FILTER_MASK 0xffffffff
+#define SNBEP_PCU_MSR_CORE_C3_CTR 0x3fc
+#define SNBEP_PCU_MSR_CORE_C6_CTR 0x3fd
+
+struct intel_uncore_ops;
+struct intel_uncore_pmu;
+struct intel_uncore_box;
+struct uncore_event_desc;
+
+struct intel_uncore_type {
+ const char *name;
+ int num_counters;
+ int num_boxes;
+ int perf_ctr_bits;
+ int fixed_ctr_bits;
+ unsigned perf_ctr;
+ unsigned event_ctl;
+ unsigned event_mask;
+ unsigned fixed_ctr;
+ unsigned fixed_ctl;
+ unsigned box_ctl;
+ unsigned msr_offset;
+ unsigned num_shared_regs:8;
+ unsigned single_fixed:1;
+ struct event_constraint unconstrainted;
+ struct event_constraint *constraints;
+ struct intel_uncore_pmu *pmus;
+ struct intel_uncore_ops *ops;
+ struct uncore_event_desc *event_descs;
+ const struct attribute_group *attr_groups[3];
+};
+
+#define format_group attr_groups[0]
+
+struct intel_uncore_ops {
+ void (*init_box)(struct intel_uncore_box *);
+ void (*disable_box)(struct intel_uncore_box *);
+ void (*enable_box)(struct intel_uncore_box *);
+ void (*disable_event)(struct intel_uncore_box *, struct perf_event *);
+ void (*enable_event)(struct intel_uncore_box *, struct perf_event *);
+ u64 (*read_counter)(struct intel_uncore_box *, struct perf_event *);
+ int (*hw_config)(struct intel_uncore_box *, struct perf_event *);
+ struct event_constraint *(*get_constraint)(struct intel_uncore_box *,
+ struct perf_event *);
+ void (*put_constraint)(struct intel_uncore_box *, struct perf_event *);
+};
+
+struct intel_uncore_pmu {
+ struct pmu pmu;
+ char name[UNCORE_PMU_NAME_LEN];
+ int pmu_idx;
+ int func_id;
+ struct intel_uncore_type *type;
+ struct intel_uncore_box ** __percpu box;
+ struct list_head box_list;
+};
+
+struct intel_uncore_extra_reg {
+ raw_spinlock_t lock;
+ u64 config1;
+ atomic_t ref;
+};
+
+struct intel_uncore_box {
+ int phys_id;
+ int n_active; /* number of active events */
+ int n_events;
+ int cpu; /* cpu to collect events */
+ unsigned long flags;
+ atomic_t refcnt;
+ struct perf_event *events[UNCORE_PMC_IDX_MAX];
+ struct perf_event *event_list[UNCORE_PMC_IDX_MAX];
+ unsigned long active_mask[BITS_TO_LONGS(UNCORE_PMC_IDX_MAX)];
+ u64 tags[UNCORE_PMC_IDX_MAX];
+ struct pci_dev *pci_dev;
+ struct intel_uncore_pmu *pmu;
+ struct hrtimer hrtimer;
+ struct list_head list;
+ struct intel_uncore_extra_reg shared_regs[0];
+};
+
+#define UNCORE_BOX_FLAG_INITIATED 0
+
+struct uncore_event_desc {
+ struct kobj_attribute attr;
+ const char *config;
+};
+
+#define INTEL_UNCORE_EVENT_DESC(_name, _config) \
+{ \
+ .attr = __ATTR(_name, 0444, uncore_event_show, NULL), \
+ .config = _config, \
+}
+
+#define DEFINE_UNCORE_FORMAT_ATTR(_var, _name, _format) \
+static ssize_t __uncore_##_var##_show(struct kobject *kobj, \
+ struct kobj_attribute *attr, \
+ char *page) \
+{ \
+ BUILD_BUG_ON(sizeof(_format) >= PAGE_SIZE); \
+ return sprintf(page, _format "\n"); \
+} \
+static struct kobj_attribute format_attr_##_var = \
+ __ATTR(_name, 0444, __uncore_##_var##_show, NULL)
+
+
+static ssize_t uncore_event_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ struct uncore_event_desc *event =
+ container_of(attr, struct uncore_event_desc, attr);
+ return sprintf(buf, "%s", event->config);
+}
+
+static inline unsigned uncore_pci_box_ctl(struct intel_uncore_box *box)
+{
+ return box->pmu->type->box_ctl;
+}
+
+static inline unsigned uncore_pci_fixed_ctl(struct intel_uncore_box *box)
+{
+ return box->pmu->type->fixed_ctl;
+}
+
+static inline unsigned uncore_pci_fixed_ctr(struct intel_uncore_box *box)
+{
+ return box->pmu->type->fixed_ctr;
+}
+
+static inline
+unsigned uncore_pci_event_ctl(struct intel_uncore_box *box, int idx)
+{
+ return idx * 4 + box->pmu->type->event_ctl;
+}
+
+static inline
+unsigned uncore_pci_perf_ctr(struct intel_uncore_box *box, int idx)
+{
+ return idx * 8 + box->pmu->type->perf_ctr;
+}
+
+static inline
+unsigned uncore_msr_box_ctl(struct intel_uncore_box *box)
+{
+ if (!box->pmu->type->box_ctl)
+ return 0;
+ return box->pmu->type->box_ctl +
+ box->pmu->type->msr_offset * box->pmu->pmu_idx;
+}
+
+static inline
+unsigned uncore_msr_fixed_ctl(struct intel_uncore_box *box)
+{
+ if (!box->pmu->type->fixed_ctl)
+ return 0;
+ return box->pmu->type->fixed_ctl +
+ box->pmu->type->msr_offset * box->pmu->pmu_idx;
+}
+
+static inline
+unsigned uncore_msr_fixed_ctr(struct intel_uncore_box *box)
+{
+ return box->pmu->type->fixed_ctr +
+ box->pmu->type->msr_offset * box->pmu->pmu_idx;
+}
+
+static inline
+unsigned uncore_msr_event_ctl(struct intel_uncore_box *box, int idx)
+{
+ return idx + box->pmu->type->event_ctl +
+ box->pmu->type->msr_offset * box->pmu->pmu_idx;
+}
+
+static inline
+unsigned uncore_msr_perf_ctr(struct intel_uncore_box *box, int idx)
+{
+ return idx + box->pmu->type->perf_ctr +
+ box->pmu->type->msr_offset * box->pmu->pmu_idx;
+}
+
+static inline
+unsigned uncore_fixed_ctl(struct intel_uncore_box *box)
+{
+ if (box->pci_dev)
+ return uncore_pci_fixed_ctl(box);
+ else
+ return uncore_msr_fixed_ctl(box);
+}
+
+static inline
+unsigned uncore_fixed_ctr(struct intel_uncore_box *box)
+{
+ if (box->pci_dev)
+ return uncore_pci_fixed_ctr(box);
+ else
+ return uncore_msr_fixed_ctr(box);
+}
+
+static inline
+unsigned uncore_event_ctl(struct intel_uncore_box *box, int idx)
+{
+ if (box->pci_dev)
+ return uncore_pci_event_ctl(box, idx);
+ else
+ return uncore_msr_event_ctl(box, idx);
+}
+
+static inline
+unsigned uncore_perf_ctr(struct intel_uncore_box *box, int idx)
+{
+ if (box->pci_dev)
+ return uncore_pci_perf_ctr(box, idx);
+ else
+ return uncore_msr_perf_ctr(box, idx);
+}
+
+static inline int uncore_perf_ctr_bits(struct intel_uncore_box *box)
+{
+ return box->pmu->type->perf_ctr_bits;
+}
+
+static inline int uncore_fixed_ctr_bits(struct intel_uncore_box *box)
+{
+ return box->pmu->type->fixed_ctr_bits;
+}
+
+static inline int uncore_num_counters(struct intel_uncore_box *box)
+{
+ return box->pmu->type->num_counters;
+}
+
+static inline void uncore_disable_box(struct intel_uncore_box *box)
+{
+ if (box->pmu->type->ops->disable_box)
+ box->pmu->type->ops->disable_box(box);
+}
+
+static inline void uncore_enable_box(struct intel_uncore_box *box)
+{
+ if (box->pmu->type->ops->enable_box)
+ box->pmu->type->ops->enable_box(box);
+}
+
+static inline void uncore_disable_event(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ box->pmu->type->ops->disable_event(box, event);
+}
+
+static inline void uncore_enable_event(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ box->pmu->type->ops->enable_event(box, event);
+}
+
+static inline u64 uncore_read_counter(struct intel_uncore_box *box,
+ struct perf_event *event)
+{
+ return box->pmu->type->ops->read_counter(box, event);
+}
+
+static inline void uncore_box_init(struct intel_uncore_box *box)
+{
+ if (!test_and_set_bit(UNCORE_BOX_FLAG_INITIATED, &box->flags)) {
+ if (box->pmu->type->ops->init_box)
+ box->pmu->type->ops->init_box(box);
+ }
+}
diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c
index 47124a7..92c7e39 100644
--- a/arch/x86/kernel/cpu/perf_event_p4.c
+++ b/arch/x86/kernel/cpu/perf_event_p4.c
@@ -895,8 +895,8 @@
* So at moment let leave metrics turned on forever -- it's
* ok for now but need to be revisited!
*
- * (void)checking_wrmsrl(MSR_IA32_PEBS_ENABLE, (u64)0);
- * (void)checking_wrmsrl(MSR_P4_PEBS_MATRIX_VERT, (u64)0);
+ * (void)wrmsrl_safe(MSR_IA32_PEBS_ENABLE, (u64)0);
+ * (void)wrmsrl_safe(MSR_P4_PEBS_MATRIX_VERT, (u64)0);
*/
}
@@ -909,7 +909,7 @@
* state we need to clear P4_CCCR_OVF, otherwise interrupt get
* asserted again and again
*/
- (void)checking_wrmsrl(hwc->config_base,
+ (void)wrmsrl_safe(hwc->config_base,
(u64)(p4_config_unpack_cccr(hwc->config)) &
~P4_CCCR_ENABLE & ~P4_CCCR_OVF & ~P4_CCCR_RESERVED);
}
@@ -943,8 +943,8 @@
bind = &p4_pebs_bind_map[idx];
- (void)checking_wrmsrl(MSR_IA32_PEBS_ENABLE, (u64)bind->metric_pebs);
- (void)checking_wrmsrl(MSR_P4_PEBS_MATRIX_VERT, (u64)bind->metric_vert);
+ (void)wrmsrl_safe(MSR_IA32_PEBS_ENABLE, (u64)bind->metric_pebs);
+ (void)wrmsrl_safe(MSR_P4_PEBS_MATRIX_VERT, (u64)bind->metric_vert);
}
static void p4_pmu_enable_event(struct perf_event *event)
@@ -978,8 +978,8 @@
*/
p4_pmu_enable_pebs(hwc->config);
- (void)checking_wrmsrl(escr_addr, escr_conf);
- (void)checking_wrmsrl(hwc->config_base,
+ (void)wrmsrl_safe(escr_addr, escr_conf);
+ (void)wrmsrl_safe(hwc->config_base,
(cccr & ~P4_CCCR_RESERVED) | P4_CCCR_ENABLE);
}
@@ -1325,7 +1325,7 @@
unsigned int low, high;
/* If we get stripped -- indexing fails */
- BUILD_BUG_ON(ARCH_P4_MAX_CCCR > X86_PMC_MAX_GENERIC);
+ BUILD_BUG_ON(ARCH_P4_MAX_CCCR > INTEL_PMC_MAX_GENERIC);
rdmsr(MSR_IA32_MISC_ENABLE, low, high);
if (!(low & (1 << 7))) {
diff --git a/arch/x86/kernel/cpu/perf_event_p6.c b/arch/x86/kernel/cpu/perf_event_p6.c
index 32bcfc7..e4dd0f7 100644
--- a/arch/x86/kernel/cpu/perf_event_p6.c
+++ b/arch/x86/kernel/cpu/perf_event_p6.c
@@ -71,7 +71,7 @@
if (cpuc->enabled)
val |= ARCH_PERFMON_EVENTSEL_ENABLE;
- (void)checking_wrmsrl(hwc->config_base, val);
+ (void)wrmsrl_safe(hwc->config_base, val);
}
static void p6_pmu_enable_event(struct perf_event *event)
@@ -84,7 +84,7 @@
if (cpuc->enabled)
val |= ARCH_PERFMON_EVENTSEL_ENABLE;
- (void)checking_wrmsrl(hwc->config_base, val);
+ (void)wrmsrl_safe(hwc->config_base, val);
}
PMU_FORMAT_ATTR(event, "config:0-7" );
diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c
index addf9e8..ee8e9ab 100644
--- a/arch/x86/kernel/cpu/scattered.c
+++ b/arch/x86/kernel/cpu/scattered.c
@@ -31,7 +31,7 @@
const struct cpuid_bit *cb;
static const struct cpuid_bit __cpuinitconst cpuid_bits[] = {
- { X86_FEATURE_DTS, CR_EAX, 0, 0x00000006, 0 },
+ { X86_FEATURE_DTHERM, CR_EAX, 0, 0x00000006, 0 },
{ X86_FEATURE_IDA, CR_EAX, 1, 0x00000006, 0 },
{ X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006, 0 },
{ X86_FEATURE_PLN, CR_EAX, 4, 0x00000006, 0 },
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 571246d8..ae42418b 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -27,8 +27,8 @@
void printk_address(unsigned long address, int reliable)
{
- printk(" [<%p>] %s%pB\n", (void *) address,
- reliable ? "" : "? ", (void *) address);
+ pr_cont(" [<%p>] %s%pB\n",
+ (void *)address, reliable ? "" : "? ", (void *)address);
}
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
@@ -271,6 +271,7 @@
current->thread.trap_nr, SIGSEGV) == NOTIFY_STOP)
return 1;
+ print_modules();
show_regs(regs);
#ifdef CONFIG_X86_32
if (user_mode_vm(regs)) {
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index e0b1d78..1038a41 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -73,11 +73,11 @@
if (kstack_end(stack))
break;
if (i && ((i % STACKSLOTS_PER_LINE) == 0))
- printk(KERN_CONT "\n");
- printk(KERN_CONT " %08lx", *stack++);
+ pr_cont("\n");
+ pr_cont(" %08lx", *stack++);
touch_nmi_watchdog();
}
- printk(KERN_CONT "\n");
+ pr_cont("\n");
show_trace_log_lvl(task, regs, sp, bp, log_lvl);
}
@@ -86,12 +86,11 @@
{
int i;
- print_modules();
__show_regs(regs, !user_mode_vm(regs));
- printk(KERN_EMERG "Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)\n",
- TASK_COMM_LEN, current->comm, task_pid_nr(current),
- current_thread_info(), current, task_thread_info(current));
+ pr_emerg("Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)\n",
+ TASK_COMM_LEN, current->comm, task_pid_nr(current),
+ current_thread_info(), current, task_thread_info(current));
/*
* When in-kernel, we also print out the stack and code at the
* time of the fault..
@@ -102,10 +101,10 @@
unsigned char c;
u8 *ip;
- printk(KERN_EMERG "Stack:\n");
+ pr_emerg("Stack:\n");
show_stack_log_lvl(NULL, regs, ®s->sp, 0, KERN_EMERG);
- printk(KERN_EMERG "Code: ");
+ pr_emerg("Code:");
ip = (u8 *)regs->ip - code_prologue;
if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
@@ -116,16 +115,16 @@
for (i = 0; i < code_len; i++, ip++) {
if (ip < (u8 *)PAGE_OFFSET ||
probe_kernel_address(ip, c)) {
- printk(KERN_CONT " Bad EIP value.");
+ pr_cont(" Bad EIP value.");
break;
}
if (ip == (u8 *)regs->ip)
- printk(KERN_CONT "<%02x> ", c);
+ pr_cont(" <%02x>", c);
else
- printk(KERN_CONT "%02x ", c);
+ pr_cont(" %02x", c);
}
}
- printk(KERN_CONT "\n");
+ pr_cont("\n");
}
int is_valid_bugaddr(unsigned long ip)
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 791b761..b653675 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -228,20 +228,20 @@
if (stack >= irq_stack && stack <= irq_stack_end) {
if (stack == irq_stack_end) {
stack = (unsigned long *) (irq_stack_end[-1]);
- printk(KERN_CONT " <EOI> ");
+ pr_cont(" <EOI> ");
}
} else {
if (((long) stack & (THREAD_SIZE-1)) == 0)
break;
}
if (i && ((i % STACKSLOTS_PER_LINE) == 0))
- printk(KERN_CONT "\n");
- printk(KERN_CONT " %016lx", *stack++);
+ pr_cont("\n");
+ pr_cont(" %016lx", *stack++);
touch_nmi_watchdog();
}
preempt_enable();
- printk(KERN_CONT "\n");
+ pr_cont("\n");
show_trace_log_lvl(task, regs, sp, bp, log_lvl);
}
@@ -254,10 +254,9 @@
sp = regs->sp;
printk("CPU %d ", cpu);
- print_modules();
__show_regs(regs, 1);
- printk("Process %s (pid: %d, threadinfo %p, task %p)\n",
- cur->comm, cur->pid, task_thread_info(cur), cur);
+ printk(KERN_DEFAULT "Process %s (pid: %d, threadinfo %p, task %p)\n",
+ cur->comm, cur->pid, task_thread_info(cur), cur);
/*
* When in-kernel, we also print out the stack and code at the
@@ -284,16 +283,16 @@
for (i = 0; i < code_len; i++, ip++) {
if (ip < (u8 *)PAGE_OFFSET ||
probe_kernel_address(ip, c)) {
- printk(KERN_CONT " Bad RIP value.");
+ pr_cont(" Bad RIP value.");
break;
}
if (ip == (u8 *)regs->ip)
- printk(KERN_CONT "<%02x> ", c);
+ pr_cont("<%02x> ", c);
else
- printk(KERN_CONT "%02x ", c);
+ pr_cont("%02x ", c);
}
}
- printk(KERN_CONT "\n");
+ pr_cont("\n");
}
int is_valid_bugaddr(unsigned long ip)
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 7d65133..111f6bb 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1758,10 +1758,30 @@
*/
call save_paranoid
DEFAULT_FRAME 0
+
+ /*
+ * Save off the CR2 register. If we take a page fault in the NMI then
+ * it could corrupt the CR2 value. If the NMI preempts a page fault
+ * handler before it was able to read the CR2 register, and then the
+ * NMI itself takes a page fault, the page fault that was preempted
+ * will read the information from the NMI page fault and not the
+ * origin fault. Save it off and restore it if it changes.
+ * Use the r12 callee-saved register.
+ */
+ movq %cr2, %r12
+
/* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
movq %rsp,%rdi
movq $-1,%rsi
call do_nmi
+
+ /* Did the NMI take a page fault? Restore cr2 if it did */
+ movq %cr2, %rcx
+ cmpq %rcx, %r12
+ je 1f
+ movq %r12, %cr2
+1:
+
testl %ebx,%ebx /* swapgs needed? */
jnz nmi_restore
nmi_swapgs:
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 3dafc60..1f5f1d5 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -294,9 +294,9 @@
raw_spin_unlock(&desc->lock);
if (break_affinity && set_affinity)
- printk("Broke affinity for irq %i\n", irq);
+ pr_notice("Broke affinity for irq %i\n", irq);
else if (!set_affinity)
- printk("Cannot set affinity for irq %i\n", irq);
+ pr_notice("Cannot set affinity for irq %i\n", irq);
}
/*
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 8bfb614..3f61904 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -444,12 +444,12 @@
/**
* kgdb_arch_handle_exception - Handle architecture specific GDB packets.
- * @vector: The error vector of the exception that happened.
+ * @e_vector: The error vector of the exception that happened.
* @signo: The signal number of the exception that happened.
* @err_code: The error code of the exception that happened.
- * @remcom_in_buffer: The buffer of the packet we have read.
- * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into.
- * @regs: The &struct pt_regs of the current process.
+ * @remcomInBuffer: The buffer of the packet we have read.
+ * @remcomOutBuffer: The buffer of %BUFMAX bytes to write a packet into.
+ * @linux_regs: The &struct pt_regs of the current process.
*
* This function MUST handle the 'c' and 's' command packets,
* as well packets to set / remove a hardware breakpoint, if used.
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 086eb58..f1b42b3a 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -120,11 +120,6 @@
bool ret = false;
struct pvclock_vcpu_time_info *src;
- /*
- * per_cpu() is safe here because this function is only called from
- * timer functions where preemption is already disabled.
- */
- WARN_ON(!in_atomic());
src = &__get_cpu_var(hv_clock);
if ((src->flags & PVCLOCK_GUEST_STOPPED) != 0) {
__this_cpu_and(hv_clock.flags, ~PVCLOCK_GUEST_STOPPED);
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index fbdfc69..4873e62 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -87,6 +87,7 @@
#include <asm/microcode.h>
#include <asm/processor.h>
#include <asm/cpu_device_id.h>
+#include <asm/perf_event.h>
MODULE_DESCRIPTION("Microcode Update Driver");
MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
@@ -277,7 +278,6 @@
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
int err = 0;
- mutex_lock(µcode_mutex);
if (uci->valid) {
enum ucode_state ustate;
@@ -288,7 +288,6 @@
if (ustate == UCODE_ERROR)
err = -EINVAL;
}
- mutex_unlock(µcode_mutex);
return err;
}
@@ -298,19 +297,31 @@
const char *buf, size_t size)
{
unsigned long val;
- int cpu = dev->id;
- ssize_t ret = 0;
+ int cpu;
+ ssize_t ret = 0, tmp_ret;
ret = kstrtoul(buf, 0, &val);
if (ret)
return ret;
- if (val == 1) {
- get_online_cpus();
- if (cpu_online(cpu))
- ret = reload_for_cpu(cpu);
- put_online_cpus();
+ if (val != 1)
+ return size;
+
+ get_online_cpus();
+ mutex_lock(µcode_mutex);
+ for_each_online_cpu(cpu) {
+ tmp_ret = reload_for_cpu(cpu);
+ if (tmp_ret != 0)
+ pr_warn("Error reloading microcode on CPU %d\n", cpu);
+
+ /* save retval of the first encountered reload error */
+ if (!ret)
+ ret = tmp_ret;
}
+ if (!ret)
+ perf_check_microcode();
+ mutex_unlock(µcode_mutex);
+ put_online_cpus();
if (!ret)
ret = size;
@@ -339,7 +350,6 @@
static DEVICE_ATTR(processor_flags, 0400, pf_show, NULL);
static struct attribute *mc_default_attrs[] = {
- &dev_attr_reload.attr,
&dev_attr_version.attr,
&dev_attr_processor_flags.attr,
NULL
@@ -504,7 +514,7 @@
#ifdef MODULE
/* Autoload on Intel and AMD systems */
-static const struct x86_cpu_id microcode_id[] = {
+static const struct x86_cpu_id __initconst microcode_id[] = {
#ifdef CONFIG_MICROCODE_INTEL
{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, },
#endif
@@ -516,6 +526,16 @@
MODULE_DEVICE_TABLE(x86cpu, microcode_id);
#endif
+static struct attribute *cpu_root_microcode_attrs[] = {
+ &dev_attr_reload.attr,
+ NULL
+};
+
+static struct attribute_group cpu_root_microcode_group = {
+ .name = "microcode",
+ .attrs = cpu_root_microcode_attrs,
+};
+
static int __init microcode_init(void)
{
struct cpuinfo_x86 *c = &cpu_data(0);
@@ -540,16 +560,25 @@
mutex_lock(µcode_mutex);
error = subsys_interface_register(&mc_cpu_interface);
-
+ if (!error)
+ perf_check_microcode();
mutex_unlock(µcode_mutex);
put_online_cpus();
if (error)
goto out_pdev;
+ error = sysfs_create_group(&cpu_subsys.dev_root->kobj,
+ &cpu_root_microcode_group);
+
+ if (error) {
+ pr_err("Error creating microcode group!\n");
+ goto out_driver;
+ }
+
error = microcode_dev_init();
if (error)
- goto out_driver;
+ goto out_ucode_group;
register_syscore_ops(&mc_syscore_ops);
register_hotcpu_notifier(&mc_cpu_notifier);
@@ -559,7 +588,11 @@
return 0;
-out_driver:
+ out_ucode_group:
+ sysfs_remove_group(&cpu_subsys.dev_root->kobj,
+ &cpu_root_microcode_group);
+
+ out_driver:
get_online_cpus();
mutex_lock(µcode_mutex);
@@ -568,7 +601,7 @@
mutex_unlock(µcode_mutex);
put_online_cpus();
-out_pdev:
+ out_pdev:
platform_device_unregister(microcode_pdev);
return error;
@@ -584,6 +617,9 @@
unregister_hotcpu_notifier(&mc_cpu_notifier);
unregister_syscore_ops(&mc_syscore_ops);
+ sysfs_remove_group(&cpu_subsys.dev_root->kobj,
+ &cpu_root_microcode_group);
+
get_online_cpus();
mutex_lock(µcode_mutex);
diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c
index f21fd94..202494d 100644
--- a/arch/x86/kernel/module.c
+++ b/arch/x86/kernel/module.c
@@ -15,6 +15,9 @@
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/moduleloader.h>
#include <linux/elf.h>
#include <linux/vmalloc.h>
@@ -30,9 +33,14 @@
#include <asm/pgtable.h>
#if 0
-#define DEBUGP printk
+#define DEBUGP(fmt, ...) \
+ printk(KERN_DEBUG fmt, ##__VA_ARGS__)
#else
-#define DEBUGP(fmt...)
+#define DEBUGP(fmt, ...) \
+do { \
+ if (0) \
+ printk(KERN_DEBUG fmt, ##__VA_ARGS__); \
+} while (0)
#endif
void *module_alloc(unsigned long size)
@@ -56,8 +64,8 @@
Elf32_Sym *sym;
uint32_t *location;
- DEBUGP("Applying relocate section %u to %u\n", relsec,
- sechdrs[relsec].sh_info);
+ DEBUGP("Applying relocate section %u to %u\n",
+ relsec, sechdrs[relsec].sh_info);
for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
/* This is where to make the change */
location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
@@ -77,7 +85,7 @@
*location += sym->st_value - (uint32_t)location;
break;
default:
- printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+ pr_err("%s: Unknown relocation: %u\n",
me->name, ELF32_R_TYPE(rel[i].r_info));
return -ENOEXEC;
}
@@ -97,8 +105,8 @@
void *loc;
u64 val;
- DEBUGP("Applying relocate section %u to %u\n", relsec,
- sechdrs[relsec].sh_info);
+ DEBUGP("Applying relocate section %u to %u\n",
+ relsec, sechdrs[relsec].sh_info);
for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
/* This is where to make the change */
loc = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
@@ -110,8 +118,8 @@
+ ELF64_R_SYM(rel[i].r_info);
DEBUGP("type %d st_value %Lx r_addend %Lx loc %Lx\n",
- (int)ELF64_R_TYPE(rel[i].r_info),
- sym->st_value, rel[i].r_addend, (u64)loc);
+ (int)ELF64_R_TYPE(rel[i].r_info),
+ sym->st_value, rel[i].r_addend, (u64)loc);
val = sym->st_value + rel[i].r_addend;
@@ -140,7 +148,7 @@
#endif
break;
default:
- printk(KERN_ERR "module %s: Unknown rela relocation: %llu\n",
+ pr_err("%s: Unknown rela relocation: %llu\n",
me->name, ELF64_R_TYPE(rel[i].r_info));
return -ENOEXEC;
}
@@ -148,9 +156,9 @@
return 0;
overflow:
- printk(KERN_ERR "overflow in relocation type %d val %Lx\n",
+ pr_err("overflow in relocation type %d val %Lx\n",
(int)ELF64_R_TYPE(rel[i].r_info), val);
- printk(KERN_ERR "`%s' likely not compiled with -mcmodel=kernel\n",
+ pr_err("`%s' likely not compiled with -mcmodel=kernel\n",
me->name);
return -ENOEXEC;
}
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index a0b2f84..f84f5c5 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -365,8 +365,9 @@
#ifdef CONFIG_X86_32
/*
* For i386, NMIs use the same stack as the kernel, and we can
- * add a workaround to the iret problem in C. Simply have 3 states
- * the NMI can be in.
+ * add a workaround to the iret problem in C (preventing nested
+ * NMIs if an NMI takes a trap). Simply have 3 states the NMI
+ * can be in:
*
* 1) not running
* 2) executing
@@ -383,32 +384,50 @@
* If an NMI hits a breakpoint that executes an iret, another
* NMI can preempt it. We do not want to allow this new NMI
* to run, but we want to execute it when the first one finishes.
- * We set the state to "latched", and the first NMI will perform
- * an cmpxchg on the state, and if it doesn't successfully
- * reset the state to "not running" it will restart the next
- * NMI.
+ * We set the state to "latched", and the exit of the first NMI will
+ * perform a dec_return, if the result is zero (NOT_RUNNING), then
+ * it will simply exit the NMI handler. If not, the dec_return
+ * would have set the state to NMI_EXECUTING (what we want it to
+ * be when we are running). In this case, we simply jump back
+ * to rerun the NMI handler again, and restart the 'latched' NMI.
+ *
+ * No trap (breakpoint or page fault) should be hit before nmi_restart,
+ * thus there is no race between the first check of state for NOT_RUNNING
+ * and setting it to NMI_EXECUTING. The HW will prevent nested NMIs
+ * at this point.
+ *
+ * In case the NMI takes a page fault, we need to save off the CR2
+ * because the NMI could have preempted another page fault and corrupt
+ * the CR2 that is about to be read. As nested NMIs must be restarted
+ * and they can not take breakpoints or page faults, the update of the
+ * CR2 must be done before converting the nmi state back to NOT_RUNNING.
+ * Otherwise, there would be a race of another nested NMI coming in
+ * after setting state to NOT_RUNNING but before updating the nmi_cr2.
*/
enum nmi_states {
- NMI_NOT_RUNNING,
+ NMI_NOT_RUNNING = 0,
NMI_EXECUTING,
NMI_LATCHED,
};
static DEFINE_PER_CPU(enum nmi_states, nmi_state);
+static DEFINE_PER_CPU(unsigned long, nmi_cr2);
#define nmi_nesting_preprocess(regs) \
do { \
- if (__get_cpu_var(nmi_state) != NMI_NOT_RUNNING) { \
- __get_cpu_var(nmi_state) = NMI_LATCHED; \
+ if (this_cpu_read(nmi_state) != NMI_NOT_RUNNING) { \
+ this_cpu_write(nmi_state, NMI_LATCHED); \
return; \
} \
- nmi_restart: \
- __get_cpu_var(nmi_state) = NMI_EXECUTING; \
- } while (0)
+ this_cpu_write(nmi_state, NMI_EXECUTING); \
+ this_cpu_write(nmi_cr2, read_cr2()); \
+ } while (0); \
+ nmi_restart:
#define nmi_nesting_postprocess() \
do { \
- if (cmpxchg(&__get_cpu_var(nmi_state), \
- NMI_EXECUTING, NMI_NOT_RUNNING) != NMI_EXECUTING) \
+ if (unlikely(this_cpu_read(nmi_cr2) != read_cr2())) \
+ write_cr2(this_cpu_read(nmi_cr2)); \
+ if (this_cpu_dec_return(nmi_state)) \
goto nmi_restart; \
} while (0)
#else /* x86_64 */
diff --git a/arch/x86/kernel/nmi_selftest.c b/arch/x86/kernel/nmi_selftest.c
index 149b8d9..6d9582e 100644
--- a/arch/x86/kernel/nmi_selftest.c
+++ b/arch/x86/kernel/nmi_selftest.c
@@ -42,7 +42,8 @@
static void __init init_nmi_testsuite(void)
{
/* trap all the unknown NMIs we may generate */
- register_nmi_handler_initonly(NMI_UNKNOWN, nmi_unk_cb, 0, "nmi_selftest_unk");
+ register_nmi_handler(NMI_UNKNOWN, nmi_unk_cb, 0, "nmi_selftest_unk",
+ __initdata);
}
static void __init cleanup_nmi_testsuite(void)
@@ -64,8 +65,8 @@
{
unsigned long timeout;
- if (register_nmi_handler_initonly(NMI_LOCAL, test_nmi_ipi_callback,
- NMI_FLAG_FIRST, "nmi_selftest")) {
+ if (register_nmi_handler(NMI_LOCAL, test_nmi_ipi_callback,
+ NMI_FLAG_FIRST, "nmi_selftest", __initdata)) {
nmi_fail = FAILURE;
return;
}
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 9ce8859..17fff18 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -352,9 +352,7 @@
#endif
.wbinvd = native_wbinvd,
.read_msr = native_read_msr_safe,
- .rdmsr_regs = native_rdmsr_safe_regs,
.write_msr = native_write_msr_safe,
- .wrmsr_regs = native_wrmsr_safe_regs,
.read_tsc = native_read_tsc,
.read_pmc = native_read_pmc,
.read_tscp = native_read_tscp,
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index b72838b..299d493 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -22,6 +22,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) "Calgary: " fmt
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
@@ -245,7 +247,7 @@
offset = iommu_area_alloc(tbl->it_map, tbl->it_size, 0,
npages, 0, boundary_size, 0);
if (offset == ~0UL) {
- printk(KERN_WARNING "Calgary: IOMMU full.\n");
+ pr_warn("IOMMU full\n");
spin_unlock_irqrestore(&tbl->it_lock, flags);
if (panic_on_overflow)
panic("Calgary: fix the allocator.\n");
@@ -271,8 +273,8 @@
entry = iommu_range_alloc(dev, tbl, npages);
if (unlikely(entry == DMA_ERROR_CODE)) {
- printk(KERN_WARNING "Calgary: failed to allocate %u pages in "
- "iommu %p\n", npages, tbl);
+ pr_warn("failed to allocate %u pages in iommu %p\n",
+ npages, tbl);
return DMA_ERROR_CODE;
}
@@ -561,8 +563,7 @@
i++;
} while ((val & 0xff) != 0xff && i < 100);
if (i == 100)
- printk(KERN_WARNING "Calgary: PCI bus not quiesced, "
- "continuing anyway\n");
+ pr_warn("PCI bus not quiesced, continuing anyway\n");
/* invalidate TCE cache */
target = calgary_reg(bbar, tar_offset(tbl->it_busno));
@@ -604,8 +605,7 @@
i++;
} while ((val64 & 0xff) != 0xff && i < 100);
if (i == 100)
- printk(KERN_WARNING "CalIOC2: PCI bus not quiesced, "
- "continuing anyway\n");
+ pr_warn("CalIOC2: PCI bus not quiesced, continuing anyway\n");
/* 3. poll Page Migration DEBUG for SoftStopFault */
target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_DEBUG);
@@ -617,8 +617,7 @@
if (++count < 100)
goto begin;
else {
- printk(KERN_WARNING "CalIOC2: too many SoftStopFaults, "
- "aborting TCE cache flush sequence!\n");
+ pr_warn("CalIOC2: too many SoftStopFaults, aborting TCE cache flush sequence!\n");
return; /* pray for the best */
}
}
@@ -840,8 +839,8 @@
plssr = be32_to_cpu(readl(target));
/* If no error, the agent ID in the CSR is not valid */
- printk(KERN_EMERG "Calgary: DMA error on Calgary PHB 0x%x, "
- "0x%08x@CSR 0x%08x@PLSSR\n", tbl->it_busno, csr, plssr);
+ pr_emerg("DMA error on Calgary PHB 0x%x, 0x%08x@CSR 0x%08x@PLSSR\n",
+ tbl->it_busno, csr, plssr);
}
static void calioc2_dump_error_regs(struct iommu_table *tbl)
@@ -867,22 +866,21 @@
target = calgary_reg(bbar, phboff | 0x800);
mck = be32_to_cpu(readl(target));
- printk(KERN_EMERG "Calgary: DMA error on CalIOC2 PHB 0x%x\n",
- tbl->it_busno);
+ pr_emerg("DMA error on CalIOC2 PHB 0x%x\n", tbl->it_busno);
- printk(KERN_EMERG "Calgary: 0x%08x@CSR 0x%08x@PLSSR 0x%08x@CSMR 0x%08x@MCK\n",
- csr, plssr, csmr, mck);
+ pr_emerg("0x%08x@CSR 0x%08x@PLSSR 0x%08x@CSMR 0x%08x@MCK\n",
+ csr, plssr, csmr, mck);
/* dump rest of error regs */
- printk(KERN_EMERG "Calgary: ");
+ pr_emerg("");
for (i = 0; i < ARRAY_SIZE(errregs); i++) {
/* err regs are at 0x810 - 0x870 */
erroff = (0x810 + (i * 0x10));
target = calgary_reg(bbar, phboff | erroff);
errregs[i] = be32_to_cpu(readl(target));
- printk("0x%08x@0x%lx ", errregs[i], erroff);
+ pr_cont("0x%08x@0x%lx ", errregs[i], erroff);
}
- printk("\n");
+ pr_cont("\n");
/* root complex status */
target = calgary_reg(bbar, phboff | PHB_ROOT_COMPLEX_STATUS);
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 62c9457..c0f420f 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -100,7 +100,7 @@
struct dma_attrs *attrs)
{
unsigned long dma_mask;
- struct page *page = NULL;
+ struct page *page;
unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
dma_addr_t addr;
@@ -108,6 +108,7 @@
flag |= __GFP_ZERO;
again:
+ page = NULL;
if (!(flag & GFP_ATOMIC))
page = dma_alloc_from_contiguous(dev, count, get_order(size));
if (!page)
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 735279e..ef6a845 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/mm.h>
@@ -145,16 +147,14 @@
/* Board Name is optional */
board = dmi_get_system_info(DMI_BOARD_NAME);
- printk(KERN_CONT "\n");
- printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s",
- current->pid, current->comm, print_tainted(),
- init_utsname()->release,
- (int)strcspn(init_utsname()->version, " "),
- init_utsname()->version);
- printk(KERN_CONT " %s %s", vendor, product);
- if (board)
- printk(KERN_CONT "/%s", board);
- printk(KERN_CONT "\n");
+ printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s %s %s%s%s\n",
+ current->pid, current->comm, print_tainted(),
+ init_utsname()->release,
+ (int)strcspn(init_utsname()->version, " "),
+ init_utsname()->version,
+ vendor, product,
+ board ? "/" : "",
+ board ? board : "");
}
void flush_thread(void)
@@ -645,7 +645,7 @@
amd_e400_c1e_detected = true;
if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
mark_tsc_unstable("TSC halt in AMD C1E");
- printk(KERN_INFO "System has AMD C1E enabled\n");
+ pr_info("System has AMD C1E enabled\n");
}
}
@@ -659,8 +659,7 @@
*/
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
&cpu);
- printk(KERN_INFO "Switch to broadcast mode on CPU%d\n",
- cpu);
+ pr_info("Switch to broadcast mode on CPU%d\n", cpu);
}
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
@@ -681,8 +680,7 @@
{
#ifdef CONFIG_SMP
if (pm_idle == poll_idle && smp_num_siblings > 1) {
- printk_once(KERN_WARNING "WARNING: polling idle and HT enabled,"
- " performance may degrade.\n");
+ pr_warn_once("WARNING: polling idle and HT enabled, performance may degrade\n");
}
#endif
if (pm_idle)
@@ -692,11 +690,11 @@
/*
* One CPU supports mwait => All CPUs supports mwait
*/
- printk(KERN_INFO "using mwait in idle threads.\n");
+ pr_info("using mwait in idle threads\n");
pm_idle = mwait_idle;
} else if (cpu_has_amd_erratum(amd_erratum_400)) {
/* E400: APIC timer interrupt does not wake up CPU from C1e */
- printk(KERN_INFO "using AMD E400 aware idle routine\n");
+ pr_info("using AMD E400 aware idle routine\n");
pm_idle = amd_e400_idle;
} else
pm_idle = default_idle;
@@ -715,7 +713,7 @@
return -EINVAL;
if (!strcmp(str, "poll")) {
- printk("using polling idle threads.\n");
+ pr_info("using polling idle threads\n");
pm_idle = poll_idle;
boot_option_idle_override = IDLE_POLL;
} else if (!strcmp(str, "mwait")) {
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 61cdf7f..0a980c9 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -117,10 +117,10 @@
{
if (dead_task->mm) {
if (dead_task->mm->context.size) {
- printk("WARNING: dead process %8s still has LDT? <%p/%d>\n",
- dead_task->comm,
- dead_task->mm->context.ldt,
- dead_task->mm->context.size);
+ pr_warn("WARNING: dead process %8s still has LDT? <%p/%d>\n",
+ dead_task->comm,
+ dead_task->mm->context.ldt,
+ dead_task->mm->context.size);
BUG();
}
}
@@ -466,7 +466,7 @@
task->thread.gs = addr;
if (doit) {
load_gs_index(0);
- ret = checking_wrmsrl(MSR_KERNEL_GS_BASE, addr);
+ ret = wrmsrl_safe(MSR_KERNEL_GS_BASE, addr);
}
}
put_cpu();
@@ -494,7 +494,7 @@
/* set the selector to 0 to not confuse
__switch_to */
loadsegment(fs, 0);
- ret = checking_wrmsrl(MSR_FS_BASE, addr);
+ ret = wrmsrl_safe(MSR_FS_BASE, addr);
}
}
put_cpu();
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 25b48ed..52190a9 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/reboot.h>
#include <linux/init.h>
@@ -20,14 +22,12 @@
#include <asm/virtext.h>
#include <asm/cpu.h>
#include <asm/nmi.h>
+#include <asm/smp.h>
-#ifdef CONFIG_X86_32
-# include <linux/ctype.h>
-# include <linux/mc146818rtc.h>
-# include <asm/realmode.h>
-#else
-# include <asm/x86_init.h>
-#endif
+#include <linux/ctype.h>
+#include <linux/mc146818rtc.h>
+#include <asm/realmode.h>
+#include <asm/x86_init.h>
/*
* Power off function, if any
@@ -49,7 +49,7 @@
*/
static int reboot_default = 1;
-#if defined(CONFIG_X86_32) && defined(CONFIG_SMP)
+#ifdef CONFIG_SMP
static int reboot_cpu = -1;
#endif
@@ -67,8 +67,8 @@
* reboot=b[ios] | s[mp] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci]
* warm Don't set the cold reboot flag
* cold Set the cold reboot flag
- * bios Reboot by jumping through the BIOS (only for X86_32)
- * smp Reboot by executing reset on BSP or other CPU (only for X86_32)
+ * bios Reboot by jumping through the BIOS
+ * smp Reboot by executing reset on BSP or other CPU
* triple Force a triple fault (init)
* kbd Use the keyboard controller. cold reset (default)
* acpi Use the RESET_REG in the FADT
@@ -95,7 +95,6 @@
reboot_mode = 0;
break;
-#ifdef CONFIG_X86_32
#ifdef CONFIG_SMP
case 's':
if (isdigit(*(str+1))) {
@@ -112,7 +111,6 @@
#endif /* CONFIG_SMP */
case 'b':
-#endif
case 'a':
case 'k':
case 't':
@@ -138,7 +136,6 @@
__setup("reboot=", reboot_setup);
-#ifdef CONFIG_X86_32
/*
* Reboot options and system auto-detection code provided by
* Dell Inc. so their systems "just work". :-)
@@ -152,16 +149,14 @@
{
if (reboot_type != BOOT_BIOS) {
reboot_type = BOOT_BIOS;
- printk(KERN_INFO "%s series board detected. Selecting BIOS-method for reboots.\n", d->ident);
+ pr_info("%s series board detected. Selecting %s-method for reboots.\n",
+ "BIOS", d->ident);
}
return 0;
}
-void machine_real_restart(unsigned int type)
+void __noreturn machine_real_restart(unsigned int type)
{
- void (*restart_lowmem)(unsigned int) = (void (*)(unsigned int))
- real_mode_header->machine_real_restart_asm;
-
local_irq_disable();
/*
@@ -181,25 +176,28 @@
/*
* Switch back to the initial page table.
*/
+#ifdef CONFIG_X86_32
load_cr3(initial_page_table);
-
- /*
- * Write 0x1234 to absolute memory location 0x472. The BIOS reads
- * this on booting to tell it to "Bypass memory test (also warm
- * boot)". This seems like a fairly standard thing that gets set by
- * REBOOT.COM programs, and the previous reset routine did this
- * too. */
- *((unsigned short *)0x472) = reboot_mode;
+#else
+ write_cr3(real_mode_header->trampoline_pgd);
+#endif
/* Jump to the identity-mapped low memory code */
- restart_lowmem(type);
+#ifdef CONFIG_X86_32
+ asm volatile("jmpl *%0" : :
+ "rm" (real_mode_header->machine_real_restart_asm),
+ "a" (type));
+#else
+ asm volatile("ljmpl *%0" : :
+ "m" (real_mode_header->machine_real_restart_asm),
+ "D" (type));
+#endif
+ unreachable();
}
#ifdef CONFIG_APM_MODULE
EXPORT_SYMBOL(machine_real_restart);
#endif
-#endif /* CONFIG_X86_32 */
-
/*
* Some Apple MacBook and MacBookPro's needs reboot=p to be able to reboot
*/
@@ -207,8 +205,8 @@
{
if (reboot_type != BOOT_CF9) {
reboot_type = BOOT_CF9;
- printk(KERN_INFO "%s series board detected. "
- "Selecting PCI-method for reboots.\n", d->ident);
+ pr_info("%s series board detected. Selecting %s-method for reboots.\n",
+ "PCI", d->ident);
}
return 0;
}
@@ -217,17 +215,16 @@
{
if (reboot_type != BOOT_KBD) {
reboot_type = BOOT_KBD;
- printk(KERN_INFO "%s series board detected. Selecting KBD-method for reboot.\n", d->ident);
+ pr_info("%s series board detected. Selecting %s-method for reboot.\n",
+ "KBD", d->ident);
}
return 0;
}
/*
- * This is a single dmi_table handling all reboot quirks. Note that
- * REBOOT_BIOS is only available for 32bit
+ * This is a single dmi_table handling all reboot quirks.
*/
static struct dmi_system_id __initdata reboot_dmi_table[] = {
-#ifdef CONFIG_X86_32
{ /* Handle problems with rebooting on Dell E520's */
.callback = set_bios_reboot,
.ident = "Dell E520",
@@ -377,7 +374,6 @@
DMI_MATCH(DMI_BOARD_NAME, "P4S800"),
},
},
-#endif /* CONFIG_X86_32 */
{ /* Handle reboot issue on Acer Aspire one */
.callback = set_kbd_reboot,
@@ -451,6 +447,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"),
},
},
+ { /* Handle problems with rebooting on the Precision M6600. */
+ .callback = set_pci_reboot,
+ .ident = "Dell OptiPlex 990",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Precision M6600"),
+ },
+ },
{ }
};
@@ -576,13 +580,11 @@
reboot_type = BOOT_KBD;
break;
-#ifdef CONFIG_X86_32
case BOOT_BIOS:
machine_real_restart(MRR_BIOS);
reboot_type = BOOT_KBD;
break;
-#endif
case BOOT_ACPI:
acpi_reboot();
@@ -624,12 +626,10 @@
/* The boot cpu is always logical cpu 0 */
int reboot_cpu_id = 0;
-#ifdef CONFIG_X86_32
/* See if there has been given a command line override */
if ((reboot_cpu != -1) && (reboot_cpu < nr_cpu_ids) &&
cpu_online(reboot_cpu))
reboot_cpu_id = reboot_cpu;
-#endif
/* Make certain the cpu I'm about to reboot on is online */
if (!cpu_online(reboot_cpu_id))
@@ -670,7 +670,7 @@
static void native_machine_restart(char *__unused)
{
- printk("machine restart\n");
+ pr_notice("machine restart\n");
if (!reboot_force)
machine_shutdown();
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 16be6dc..f4b9b80 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1031,8 +1031,6 @@
x86_init.timers.wallclock_init();
- x86_platform.wallclock_init();
-
mcheck_init();
arch_init_ideal_nops();
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 21af737..b280908 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -6,6 +6,9 @@
* 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes
* 2000-2002 x86-64 support by Andi Kleen
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
@@ -814,7 +817,7 @@
me->comm, me->pid, where, frame,
regs->ip, regs->sp, regs->orig_ax);
print_vma_addr(" in ", regs->ip);
- printk(KERN_CONT "\n");
+ pr_cont("\n");
}
force_sig(SIGSEGV, me);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 3fab55b..c1a310f 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1,4 +1,4 @@
-/*
+ /*
* x86 SMP booting functions
*
* (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
@@ -39,6 +39,8 @@
* Glauber Costa : i386 and x86_64 integration
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/module.h>
@@ -184,7 +186,7 @@
* boards)
*/
- pr_debug("CALLIN, before setup_local_APIC().\n");
+ pr_debug("CALLIN, before setup_local_APIC()\n");
if (apic->smp_callin_clear_local_apic)
apic->smp_callin_clear_local_apic();
setup_local_APIC();
@@ -255,22 +257,13 @@
check_tsc_sync_target();
/*
- * We need to hold call_lock, so there is no inconsistency
- * between the time smp_call_function() determines number of
- * IPI recipients, and the time when the determination is made
- * for which cpus receive the IPI. Holding this
- * lock helps us to not include this cpu in a currently in progress
- * smp_call_function().
- *
* We need to hold vector_lock so there the set of online cpus
* does not change while we are assigning vectors to cpus. Holding
* this lock ensures we don't half assign or remove an irq from a cpu.
*/
- ipi_call_lock();
lock_vector_lock();
set_cpu_online(smp_processor_id(), true);
unlock_vector_lock();
- ipi_call_unlock();
per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
x86_platform.nmi_init();
@@ -349,9 +342,12 @@
static bool __cpuinit match_mc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
{
- if (c->phys_proc_id == o->phys_proc_id)
- return topology_sane(c, o, "mc");
+ if (c->phys_proc_id == o->phys_proc_id) {
+ if (cpu_has(c, X86_FEATURE_AMD_DCM))
+ return true;
+ return topology_sane(c, o, "mc");
+ }
return false;
}
@@ -429,17 +425,16 @@
/*
* Allow the user to impress friends.
*/
- pr_debug("Before bogomips.\n");
+ pr_debug("Before bogomips\n");
for_each_possible_cpu(cpu)
if (cpumask_test_cpu(cpu, cpu_callout_mask))
bogosum += cpu_data(cpu).loops_per_jiffy;
- printk(KERN_INFO
- "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
+ pr_info("Total of %d processors activated (%lu.%02lu BogoMIPS)\n",
num_online_cpus(),
bogosum/(500000/HZ),
(bogosum/(5000/HZ))%100);
- pr_debug("Before bogocount - setting activated=1.\n");
+ pr_debug("Before bogocount - setting activated=1\n");
}
void __inquire_remote_apic(int apicid)
@@ -449,18 +444,17 @@
int timeout;
u32 status;
- printk(KERN_INFO "Inquiring remote APIC 0x%x...\n", apicid);
+ pr_info("Inquiring remote APIC 0x%x...\n", apicid);
for (i = 0; i < ARRAY_SIZE(regs); i++) {
- printk(KERN_INFO "... APIC 0x%x %s: ", apicid, names[i]);
+ pr_info("... APIC 0x%x %s: ", apicid, names[i]);
/*
* Wait for idle.
*/
status = safe_apic_wait_icr_idle();
if (status)
- printk(KERN_CONT
- "a previous APIC delivery may have failed\n");
+ pr_cont("a previous APIC delivery may have failed\n");
apic_icr_write(APIC_DM_REMRD | regs[i], apicid);
@@ -473,10 +467,10 @@
switch (status) {
case APIC_ICR_RR_VALID:
status = apic_read(APIC_RRR);
- printk(KERN_CONT "%08x\n", status);
+ pr_cont("%08x\n", status);
break;
default:
- printk(KERN_CONT "failed\n");
+ pr_cont("failed\n");
}
}
}
@@ -510,12 +504,12 @@
apic_write(APIC_ESR, 0);
accept_status = (apic_read(APIC_ESR) & 0xEF);
}
- pr_debug("NMI sent.\n");
+ pr_debug("NMI sent\n");
if (send_status)
- printk(KERN_ERR "APIC never delivered???\n");
+ pr_err("APIC never delivered???\n");
if (accept_status)
- printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
+ pr_err("APIC delivery error (%lx)\n", accept_status);
return (send_status | accept_status);
}
@@ -537,7 +531,7 @@
apic_read(APIC_ESR);
}
- pr_debug("Asserting INIT.\n");
+ pr_debug("Asserting INIT\n");
/*
* Turn INIT on target chip
@@ -553,7 +547,7 @@
mdelay(10);
- pr_debug("Deasserting INIT.\n");
+ pr_debug("Deasserting INIT\n");
/* Target chip */
/* Send IPI */
@@ -586,14 +580,14 @@
/*
* Run STARTUP IPI loop.
*/
- pr_debug("#startup loops: %d.\n", num_starts);
+ pr_debug("#startup loops: %d\n", num_starts);
for (j = 1; j <= num_starts; j++) {
- pr_debug("Sending STARTUP #%d.\n", j);
+ pr_debug("Sending STARTUP #%d\n", j);
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
- pr_debug("After apic_write.\n");
+ pr_debug("After apic_write\n");
/*
* STARTUP IPI
@@ -610,7 +604,7 @@
*/
udelay(300);
- pr_debug("Startup point 1.\n");
+ pr_debug("Startup point 1\n");
pr_debug("Waiting for send to finish...\n");
send_status = safe_apic_wait_icr_idle();
@@ -625,12 +619,12 @@
if (send_status || accept_status)
break;
}
- pr_debug("After Startup.\n");
+ pr_debug("After Startup\n");
if (send_status)
- printk(KERN_ERR "APIC never delivered???\n");
+ pr_err("APIC never delivered???\n");
if (accept_status)
- printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
+ pr_err("APIC delivery error (%lx)\n", accept_status);
return (send_status | accept_status);
}
@@ -644,11 +638,11 @@
if (system_state == SYSTEM_BOOTING) {
if (node != current_node) {
if (current_node > (-1))
- pr_cont(" Ok.\n");
+ pr_cont(" OK\n");
current_node = node;
pr_info("Booting Node %3d, Processors ", node);
}
- pr_cont(" #%d%s", cpu, cpu == (nr_cpu_ids - 1) ? " Ok.\n" : "");
+ pr_cont(" #%d%s", cpu, cpu == (nr_cpu_ids - 1) ? " OK\n" : "");
return;
} else
pr_info("Booting Node %d Processor %d APIC 0x%x\n",
@@ -728,9 +722,9 @@
/*
* allow APs to start initializing.
*/
- pr_debug("Before Callout %d.\n", cpu);
+ pr_debug("Before Callout %d\n", cpu);
cpumask_set_cpu(cpu, cpu_callout_mask);
- pr_debug("After Callout %d.\n", cpu);
+ pr_debug("After Callout %d\n", cpu);
/*
* Wait 5s total for a response
@@ -758,7 +752,7 @@
pr_err("CPU%d: Stuck ??\n", cpu);
else
/* trampoline code not run */
- pr_err("CPU%d: Not responding.\n", cpu);
+ pr_err("CPU%d: Not responding\n", cpu);
if (apic->inquire_remote_apic)
apic->inquire_remote_apic(apicid);
}
@@ -803,7 +797,7 @@
if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid ||
!physid_isset(apicid, phys_cpu_present_map) ||
!apic->apic_id_valid(apicid)) {
- printk(KERN_ERR "%s: bad cpu %d\n", __func__, cpu);
+ pr_err("%s: bad cpu %d\n", __func__, cpu);
return -EINVAL;
}
@@ -884,9 +878,8 @@
unsigned int cpu;
unsigned nr;
- printk(KERN_WARNING
- "More than 8 CPUs detected - skipping them.\n"
- "Use CONFIG_X86_BIGSMP.\n");
+ pr_warn("More than 8 CPUs detected - skipping them\n"
+ "Use CONFIG_X86_BIGSMP\n");
nr = 0;
for_each_present_cpu(cpu) {
@@ -907,8 +900,7 @@
#endif
if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
- printk(KERN_WARNING
- "weird, boot CPU (#%d) not listed by the BIOS.\n",
+ pr_warn("weird, boot CPU (#%d) not listed by the BIOS\n",
hard_smp_processor_id());
physid_set(hard_smp_processor_id(), phys_cpu_present_map);
@@ -920,11 +912,10 @@
*/
if (!smp_found_config && !acpi_lapic) {
preempt_enable();
- printk(KERN_NOTICE "SMP motherboard not detected.\n");
+ pr_notice("SMP motherboard not detected\n");
disable_smp();
if (APIC_init_uniprocessor())
- printk(KERN_NOTICE "Local APIC not detected."
- " Using dummy APIC emulation.\n");
+ pr_notice("Local APIC not detected. Using dummy APIC emulation.\n");
return -1;
}
@@ -933,9 +924,8 @@
* CPU too, but we do it for the sake of robustness anyway.
*/
if (!apic->check_phys_apicid_present(boot_cpu_physical_apicid)) {
- printk(KERN_NOTICE
- "weird, boot CPU (#%d) not listed by the BIOS.\n",
- boot_cpu_physical_apicid);
+ pr_notice("weird, boot CPU (#%d) not listed by the BIOS\n",
+ boot_cpu_physical_apicid);
physid_set(hard_smp_processor_id(), phys_cpu_present_map);
}
preempt_enable();
@@ -948,8 +938,7 @@
if (!disable_apic) {
pr_err("BIOS bug, local APIC #%d not detected!...\n",
boot_cpu_physical_apicid);
- pr_err("... forcing use of dummy APIC emulation."
- "(tell your hw vendor)\n");
+ pr_err("... forcing use of dummy APIC emulation (tell your hw vendor)\n");
}
smpboot_clear_io_apic();
disable_ioapic_support();
@@ -962,7 +951,7 @@
* If SMP should be disabled, then really disable it!
*/
if (!max_cpus) {
- printk(KERN_INFO "SMP mode deactivated.\n");
+ pr_info("SMP mode deactivated\n");
smpboot_clear_io_apic();
connect_bsp_APIC();
@@ -1014,7 +1003,7 @@
if (smp_sanity_check(max_cpus) < 0) {
- printk(KERN_INFO "SMP disabled\n");
+ pr_info("SMP disabled\n");
disable_smp();
goto out;
}
@@ -1052,7 +1041,7 @@
* Set up local APIC timer on boot CPU.
*/
- printk(KERN_INFO "CPU%d: ", 0);
+ pr_info("CPU%d: ", 0);
print_cpu_info(&cpu_data(0));
x86_init.timers.setup_percpu_clockev();
@@ -1102,7 +1091,7 @@
void __init native_smp_cpus_done(unsigned int max_cpus)
{
- pr_debug("Boot done.\n");
+ pr_debug("Boot done\n");
nmi_selftest();
impress_friends();
@@ -1163,8 +1152,7 @@
/* nr_cpu_ids could be reduced via nr_cpus= */
if (possible > nr_cpu_ids) {
- printk(KERN_WARNING
- "%d Processors exceeds NR_CPUS limit of %d\n",
+ pr_warn("%d Processors exceeds NR_CPUS limit of %d\n",
possible, nr_cpu_ids);
possible = nr_cpu_ids;
}
@@ -1173,13 +1161,12 @@
if (!setup_max_cpus)
#endif
if (possible > i) {
- printk(KERN_WARNING
- "%d Processors exceeds max_cpus limit of %u\n",
+ pr_warn("%d Processors exceeds max_cpus limit of %u\n",
possible, setup_max_cpus);
possible = i;
}
- printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
+ pr_info("Allowing %d CPUs, %d hotplug CPUs\n",
possible, max_t(int, possible - num_processors, 0));
for (i = 0; i < possible; i++)
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 05b31d9..b481341 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -9,6 +9,9 @@
/*
* Handle hardware traps and faults.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/interrupt.h>
#include <linux/kallsyms.h>
#include <linux/spinlock.h>
@@ -143,12 +146,11 @@
#ifdef CONFIG_X86_64
if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
printk_ratelimit()) {
- printk(KERN_INFO
- "%s[%d] trap %s ip:%lx sp:%lx error:%lx",
- tsk->comm, tsk->pid, str,
- regs->ip, regs->sp, error_code);
+ pr_info("%s[%d] trap %s ip:%lx sp:%lx error:%lx",
+ tsk->comm, tsk->pid, str,
+ regs->ip, regs->sp, error_code);
print_vma_addr(" in ", regs->ip);
- printk("\n");
+ pr_cont("\n");
}
#endif
@@ -269,12 +271,11 @@
if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
printk_ratelimit()) {
- printk(KERN_INFO
- "%s[%d] general protection ip:%lx sp:%lx error:%lx",
+ pr_info("%s[%d] general protection ip:%lx sp:%lx error:%lx",
tsk->comm, task_pid_nr(tsk),
regs->ip, regs->sp, error_code);
print_vma_addr(" in ", regs->ip);
- printk("\n");
+ pr_cont("\n");
}
force_sig(SIGSEGV, tsk);
@@ -570,7 +571,7 @@
conditional_sti(regs);
#if 0
/* No need to warn about this any longer. */
- printk(KERN_INFO "Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
+ pr_info("Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
#endif
}
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index fc0a147..cfa5d4f 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/init.h>
@@ -84,8 +86,7 @@
#ifdef CONFIG_X86_TSC
int __init notsc_setup(char *str)
{
- printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
- "cannot disable TSC completely.\n");
+ pr_warn("Kernel compiled with CONFIG_X86_TSC, cannot disable TSC completely\n");
tsc_disabled = 1;
return 1;
}
@@ -373,7 +374,7 @@
goto success;
}
}
- printk("Fast TSC calibration failed\n");
+ pr_err("Fast TSC calibration failed\n");
return 0;
success:
@@ -392,7 +393,7 @@
*/
delta *= PIT_TICK_RATE;
do_div(delta, i*256*1000);
- printk("Fast TSC calibration using PIT\n");
+ pr_info("Fast TSC calibration using PIT\n");
return delta;
}
@@ -487,9 +488,8 @@
* use the reference value, as it is more precise.
*/
if (delta >= 90 && delta <= 110) {
- printk(KERN_INFO
- "TSC: PIT calibration matches %s. %d loops\n",
- hpet ? "HPET" : "PMTIMER", i + 1);
+ pr_info("PIT calibration matches %s. %d loops\n",
+ hpet ? "HPET" : "PMTIMER", i + 1);
return tsc_ref_min;
}
@@ -511,38 +511,36 @@
*/
if (tsc_pit_min == ULONG_MAX) {
/* PIT gave no useful value */
- printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n");
+ pr_warn("Unable to calibrate against PIT\n");
/* We don't have an alternative source, disable TSC */
if (!hpet && !ref1 && !ref2) {
- printk("TSC: No reference (HPET/PMTIMER) available\n");
+ pr_notice("No reference (HPET/PMTIMER) available\n");
return 0;
}
/* The alternative source failed as well, disable TSC */
if (tsc_ref_min == ULONG_MAX) {
- printk(KERN_WARNING "TSC: HPET/PMTIMER calibration "
- "failed.\n");
+ pr_warn("HPET/PMTIMER calibration failed\n");
return 0;
}
/* Use the alternative source */
- printk(KERN_INFO "TSC: using %s reference calibration\n",
- hpet ? "HPET" : "PMTIMER");
+ pr_info("using %s reference calibration\n",
+ hpet ? "HPET" : "PMTIMER");
return tsc_ref_min;
}
/* We don't have an alternative source, use the PIT calibration value */
if (!hpet && !ref1 && !ref2) {
- printk(KERN_INFO "TSC: Using PIT calibration value\n");
+ pr_info("Using PIT calibration value\n");
return tsc_pit_min;
}
/* The alternative source failed, use the PIT calibration value */
if (tsc_ref_min == ULONG_MAX) {
- printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed. "
- "Using PIT calibration\n");
+ pr_warn("HPET/PMTIMER calibration failed. Using PIT calibration.\n");
return tsc_pit_min;
}
@@ -551,9 +549,9 @@
* the PIT value as we know that there are PMTIMERs around
* running at double speed. At least we let the user know:
*/
- printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n",
- hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
- printk(KERN_INFO "TSC: Using PIT calibration value\n");
+ pr_warn("PIT calibration deviates from %s: %lu %lu\n",
+ hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
+ pr_info("Using PIT calibration value\n");
return tsc_pit_min;
}
@@ -785,7 +783,7 @@
tsc_unstable = 1;
sched_clock_stable = 0;
disable_sched_clock_irqtime();
- printk(KERN_INFO "Marking TSC unstable due to %s\n", reason);
+ pr_info("Marking TSC unstable due to %s\n", reason);
/* Change only the rating, when not registered */
if (clocksource_tsc.mult)
clocksource_mark_unstable(&clocksource_tsc);
@@ -912,9 +910,9 @@
goto out;
tsc_khz = freq;
- printk(KERN_INFO "Refined TSC clocksource calibration: "
- "%lu.%03lu MHz.\n", (unsigned long)tsc_khz / 1000,
- (unsigned long)tsc_khz % 1000);
+ pr_info("Refined TSC clocksource calibration: %lu.%03lu MHz\n",
+ (unsigned long)tsc_khz / 1000,
+ (unsigned long)tsc_khz % 1000);
out:
clocksource_register_khz(&clocksource_tsc, tsc_khz);
@@ -970,9 +968,9 @@
return;
}
- printk("Detected %lu.%03lu MHz processor.\n",
- (unsigned long)cpu_khz / 1000,
- (unsigned long)cpu_khz % 1000);
+ pr_info("Detected %lu.%03lu MHz processor\n",
+ (unsigned long)cpu_khz / 1000,
+ (unsigned long)cpu_khz % 1000);
/*
* Secondary CPUs do not run through tsc_init(), so set up
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index dc4e910..36fd420 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -409,9 +409,10 @@
* arch_uprobe_analyze_insn - instruction analysis including validity and fixups.
* @mm: the probed address space.
* @arch_uprobe: the probepoint information.
+ * @addr: virtual address at which to install the probepoint
* Return 0 on success or a -ve number on error.
*/
-int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm)
+int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long addr)
{
int ret;
struct insn insn;
diff --git a/arch/x86/kernel/vm86_32.c b/arch/x86/kernel/vm86_32.c
index 255f58a..54abcc0 100644
--- a/arch/x86/kernel/vm86_32.c
+++ b/arch/x86/kernel/vm86_32.c
@@ -28,6 +28,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
@@ -137,14 +139,14 @@
local_irq_enable();
if (!current->thread.vm86_info) {
- printk("no vm86_info: BAD\n");
+ pr_alert("no vm86_info: BAD\n");
do_exit(SIGSEGV);
}
set_flags(regs->pt.flags, VEFLAGS, X86_EFLAGS_VIF | current->thread.v86mask);
tmp = copy_vm86_regs_to_user(¤t->thread.vm86_info->regs, regs);
tmp += put_user(current->thread.screen_bitmap, ¤t->thread.vm86_info->screen_bitmap);
if (tmp) {
- printk("vm86: could not access userspace vm86_info\n");
+ pr_alert("could not access userspace vm86_info\n");
do_exit(SIGSEGV);
}
diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c
index 8eeb55a..992f890 100644
--- a/arch/x86/kernel/vsmp_64.c
+++ b/arch/x86/kernel/vsmp_64.c
@@ -16,6 +16,7 @@
#include <linux/pci_ids.h>
#include <linux/pci_regs.h>
#include <linux/smp.h>
+#include <linux/irq.h>
#include <asm/apic.h>
#include <asm/pci-direct.h>
@@ -95,6 +96,18 @@
ctl = readl(address + 4);
printk(KERN_INFO "vSMP CTL: capabilities:0x%08x control:0x%08x\n",
cap, ctl);
+
+ /* If possible, let the vSMP foundation route the interrupt optimally */
+#ifdef CONFIG_SMP
+ if (cap & ctl & BIT(8)) {
+ ctl &= ~BIT(8);
+#ifdef CONFIG_PROC_FS
+ /* Don't let users change irq affinity via procfs */
+ no_irq_affinity = 1;
+#endif
+ }
+#endif
+
if (cap & ctl & (1 << 4)) {
/* Setup irq ops and turn on vSMP IRQ fastpath handling */
pv_irq_ops.irq_disable = PV_CALLEE_SAVE(vsmp_irq_disable);
@@ -102,12 +115,11 @@
pv_irq_ops.save_fl = PV_CALLEE_SAVE(vsmp_save_fl);
pv_irq_ops.restore_fl = PV_CALLEE_SAVE(vsmp_restore_fl);
pv_init_ops.patch = vsmp_patch;
-
ctl &= ~(1 << 4);
- writel(ctl, address + 4);
- ctl = readl(address + 4);
- printk(KERN_INFO "vSMP CTL: control set to:0x%08x\n", ctl);
}
+ writel(ctl, address + 4);
+ ctl = readl(address + 4);
+ pr_info("vSMP CTL: control set to:0x%08x\n", ctl);
early_iounmap(address, 8);
}
@@ -187,12 +199,36 @@
#endif
}
+static int apicid_phys_pkg_id(int initial_apic_id, int index_msb)
+{
+ return hard_smp_processor_id() >> index_msb;
+}
+
+/*
+ * In vSMP, all cpus should be capable of handling interrupts, regardless of
+ * the APIC used.
+ */
+static void fill_vector_allocation_domain(int cpu, struct cpumask *retmask,
+ const struct cpumask *mask)
+{
+ cpumask_setall(retmask);
+}
+
+static void vsmp_apic_post_init(void)
+{
+ /* need to update phys_pkg_id */
+ apic->phys_pkg_id = apicid_phys_pkg_id;
+ apic->vector_allocation_domain = fill_vector_allocation_domain;
+}
+
void __init vsmp_init(void)
{
detect_vsmp_box();
if (!is_vsmp_box())
return;
+ x86_platform.apic_post_init = vsmp_apic_post_init;
+
vsmp_cap_cpus();
set_vsmp_pv_ops();
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 7515cf0e..8d141b3 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -18,6 +18,8 @@
* use the vDSO.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/time.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -111,18 +113,13 @@
static void warn_bad_vsyscall(const char *level, struct pt_regs *regs,
const char *message)
{
- static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL, DEFAULT_RATELIMIT_BURST);
- struct task_struct *tsk;
-
- if (!show_unhandled_signals || !__ratelimit(&rs))
+ if (!show_unhandled_signals)
return;
- tsk = current;
-
- printk("%s%s[%d] %s ip:%lx cs:%lx sp:%lx ax:%lx si:%lx di:%lx\n",
- level, tsk->comm, task_pid_nr(tsk),
- message, regs->ip, regs->cs,
- regs->sp, regs->ax, regs->si, regs->di);
+ pr_notice_ratelimited("%s%s[%d] %s ip:%lx cs:%lx sp:%lx ax:%lx si:%lx di:%lx\n",
+ level, current->comm, task_pid_nr(current),
+ message, regs->ip, regs->cs,
+ regs->sp, regs->ax, regs->si, regs->di);
}
static int addr_to_vsyscall_nr(unsigned long addr)
@@ -139,6 +136,19 @@
return nr;
}
+#ifdef CONFIG_SECCOMP
+static int vsyscall_seccomp(struct task_struct *tsk, int syscall_nr)
+{
+ if (!seccomp_mode(&tsk->seccomp))
+ return 0;
+ task_pt_regs(tsk)->orig_ax = syscall_nr;
+ task_pt_regs(tsk)->ax = syscall_nr;
+ return __secure_computing(syscall_nr);
+}
+#else
+#define vsyscall_seccomp(_tsk, _nr) 0
+#endif
+
static bool write_ok_or_segv(unsigned long ptr, size_t size)
{
/*
@@ -174,6 +184,7 @@
int vsyscall_nr;
int prev_sig_on_uaccess_error;
long ret;
+ int skip;
/*
* No point in checking CS -- the only way to get here is a user mode
@@ -205,9 +216,6 @@
}
tsk = current;
- if (seccomp_mode(&tsk->seccomp))
- do_exit(SIGKILL);
-
/*
* With a real vsyscall, page faults cause SIGSEGV. We want to
* preserve that behavior to make writing exploits harder.
@@ -222,8 +230,13 @@
* address 0".
*/
ret = -EFAULT;
+ skip = 0;
switch (vsyscall_nr) {
case 0:
+ skip = vsyscall_seccomp(tsk, __NR_gettimeofday);
+ if (skip)
+ break;
+
if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) ||
!write_ok_or_segv(regs->si, sizeof(struct timezone)))
break;
@@ -234,6 +247,10 @@
break;
case 1:
+ skip = vsyscall_seccomp(tsk, __NR_time);
+ if (skip)
+ break;
+
if (!write_ok_or_segv(regs->di, sizeof(time_t)))
break;
@@ -241,6 +258,10 @@
break;
case 2:
+ skip = vsyscall_seccomp(tsk, __NR_getcpu);
+ if (skip)
+ break;
+
if (!write_ok_or_segv(regs->di, sizeof(unsigned)) ||
!write_ok_or_segv(regs->si, sizeof(unsigned)))
break;
@@ -253,6 +274,12 @@
current_thread_info()->sig_on_uaccess_error = prev_sig_on_uaccess_error;
+ if (skip) {
+ if ((long)regs->ax <= 0L) /* seccomp errno emulation */
+ goto do_ret;
+ goto done; /* seccomp trace/trap */
+ }
+
if (ret == -EFAULT) {
/* Bad news -- userspace fed a bad pointer to a vsyscall. */
warn_bad_vsyscall(KERN_INFO, regs,
@@ -271,10 +298,11 @@
regs->ax = ret;
+do_ret:
/* Emulate a ret instruction. */
regs->ip = caller;
regs->sp += 8;
-
+done:
return true;
sigsegv:
diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c
index 9796c2f..6020f6f 100644
--- a/arch/x86/kernel/x8664_ksyms_64.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
@@ -28,6 +28,7 @@
EXPORT_SYMBOL(copy_user_generic_string);
EXPORT_SYMBOL(copy_user_generic_unrolled);
+EXPORT_SYMBOL(copy_user_enhanced_fast_string);
EXPORT_SYMBOL(__copy_user_nocache);
EXPORT_SYMBOL(_copy_from_user);
EXPORT_SYMBOL(_copy_to_user);
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 35c5e54..9f3167e 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -29,7 +29,6 @@
void __init x86_init_pgd_noop(pgd_t *unused) { }
int __init iommu_init_noop(void) { return 0; }
void iommu_shutdown_noop(void) { }
-void wallclock_init_noop(void) { }
/*
* The platform setup functions are preset with the default functions
@@ -101,7 +100,6 @@
struct x86_platform_ops x86_platform = {
.calibrate_tsc = native_calibrate_tsc,
- .wallclock_init = wallclock_init_noop,
.get_wallclock = mach_get_cmos_time,
.set_wallclock = mach_set_rtc_mmss,
.iommu_shutdown = iommu_shutdown_noop,
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index bd18149..3d3e207 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -3,6 +3,9 @@
*
* Author: Suresh Siddha <suresh.b.siddha@intel.com>
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/bootmem.h>
#include <linux/compat.h>
#include <asm/i387.h>
@@ -162,7 +165,7 @@
BUG_ON(sig_xstate_size < xstate_size);
if ((unsigned long)buf % 64)
- printk("save_i387_xstate: bad fpstate %p\n", buf);
+ pr_err("%s: bad fpstate %p\n", __func__, buf);
if (!used_math())
return 0;
@@ -422,7 +425,7 @@
pcntxt_mask = eax + ((u64)edx << 32);
if ((pcntxt_mask & XSTATE_FPSSE) != XSTATE_FPSSE) {
- printk(KERN_ERR "FP/SSE not shown under xsave features 0x%llx\n",
+ pr_err("FP/SSE not shown under xsave features 0x%llx\n",
pcntxt_mask);
BUG();
}
@@ -445,9 +448,8 @@
setup_xstate_init();
- printk(KERN_INFO "xsave/xrstor: enabled xstate_bv 0x%llx, "
- "cntxt size 0x%x\n",
- pcntxt_mask, xstate_size);
+ pr_info("enabled xstate_bv 0x%llx, cntxt size 0x%x\n",
+ pcntxt_mask, xstate_size);
}
/*
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index be3cea4..57e168e 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -3934,6 +3934,9 @@
{
struct kvm_mmu_page *page;
+ if (list_empty(&kvm->arch.active_mmu_pages))
+ return;
+
page = container_of(kvm->arch.active_mmu_pages.prev,
struct kvm_mmu_page, link);
kvm_mmu_prepare_zap_page(kvm, page, invalid_list);
diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c
index 2e88438..9b7ec11 100644
--- a/arch/x86/kvm/pmu.c
+++ b/arch/x86/kvm/pmu.c
@@ -80,10 +80,10 @@
static struct kvm_pmc *global_idx_to_pmc(struct kvm_pmu *pmu, int idx)
{
- if (idx < X86_PMC_IDX_FIXED)
+ if (idx < INTEL_PMC_IDX_FIXED)
return get_gp_pmc(pmu, MSR_P6_EVNTSEL0 + idx, MSR_P6_EVNTSEL0);
else
- return get_fixed_pmc_idx(pmu, idx - X86_PMC_IDX_FIXED);
+ return get_fixed_pmc_idx(pmu, idx - INTEL_PMC_IDX_FIXED);
}
void kvm_deliver_pmi(struct kvm_vcpu *vcpu)
@@ -291,7 +291,7 @@
if (pmc_is_gp(pmc))
reprogram_gp_counter(pmc, pmc->eventsel);
else {
- int fidx = idx - X86_PMC_IDX_FIXED;
+ int fidx = idx - INTEL_PMC_IDX_FIXED;
reprogram_fixed_counter(pmc,
fixed_en_pmi(pmu->fixed_ctr_ctrl, fidx), fidx);
}
@@ -452,7 +452,7 @@
return;
pmu->nr_arch_gp_counters = min((int)(entry->eax >> 8) & 0xff,
- X86_PMC_MAX_GENERIC);
+ INTEL_PMC_MAX_GENERIC);
pmu->counter_bitmask[KVM_PMC_GP] =
((u64)1 << ((entry->eax >> 16) & 0xff)) - 1;
bitmap_len = (entry->eax >> 24) & 0xff;
@@ -462,13 +462,13 @@
pmu->nr_arch_fixed_counters = 0;
} else {
pmu->nr_arch_fixed_counters = min((int)(entry->edx & 0x1f),
- X86_PMC_MAX_FIXED);
+ INTEL_PMC_MAX_FIXED);
pmu->counter_bitmask[KVM_PMC_FIXED] =
((u64)1 << ((entry->edx >> 5) & 0xff)) - 1;
}
pmu->global_ctrl = ((1 << pmu->nr_arch_gp_counters) - 1) |
- (((1ull << pmu->nr_arch_fixed_counters) - 1) << X86_PMC_IDX_FIXED);
+ (((1ull << pmu->nr_arch_fixed_counters) - 1) << INTEL_PMC_IDX_FIXED);
pmu->global_ctrl_mask = ~pmu->global_ctrl;
}
@@ -478,15 +478,15 @@
struct kvm_pmu *pmu = &vcpu->arch.pmu;
memset(pmu, 0, sizeof(*pmu));
- for (i = 0; i < X86_PMC_MAX_GENERIC; i++) {
+ for (i = 0; i < INTEL_PMC_MAX_GENERIC; i++) {
pmu->gp_counters[i].type = KVM_PMC_GP;
pmu->gp_counters[i].vcpu = vcpu;
pmu->gp_counters[i].idx = i;
}
- for (i = 0; i < X86_PMC_MAX_FIXED; i++) {
+ for (i = 0; i < INTEL_PMC_MAX_FIXED; i++) {
pmu->fixed_counters[i].type = KVM_PMC_FIXED;
pmu->fixed_counters[i].vcpu = vcpu;
- pmu->fixed_counters[i].idx = i + X86_PMC_IDX_FIXED;
+ pmu->fixed_counters[i].idx = i + INTEL_PMC_IDX_FIXED;
}
init_irq_work(&pmu->irq_work, trigger_pmi);
kvm_pmu_cpuid_update(vcpu);
@@ -498,13 +498,13 @@
int i;
irq_work_sync(&pmu->irq_work);
- for (i = 0; i < X86_PMC_MAX_GENERIC; i++) {
+ for (i = 0; i < INTEL_PMC_MAX_GENERIC; i++) {
struct kvm_pmc *pmc = &pmu->gp_counters[i];
stop_counter(pmc);
pmc->counter = pmc->eventsel = 0;
}
- for (i = 0; i < X86_PMC_MAX_FIXED; i++)
+ for (i = 0; i < INTEL_PMC_MAX_FIXED; i++)
stop_counter(&pmu->fixed_counters[i]);
pmu->fixed_ctr_ctrl = pmu->global_ctrl = pmu->global_status =
diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
index 911d264..62d02e3 100644
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -710,16 +710,6 @@
__entry->rip, __entry->slb)
);
-#define __print_insn(insn, ilen) ({ \
- int i; \
- const char *ret = p->buffer + p->len; \
- \
- for (i = 0; i < ilen; ++i) \
- trace_seq_printf(p, " %02x", insn[i]); \
- trace_seq_printf(p, "%c", 0); \
- ret; \
- })
-
#define KVM_EMUL_INSN_F_CR0_PE (1 << 0)
#define KVM_EMUL_INSN_F_EFL_VM (1 << 1)
#define KVM_EMUL_INSN_F_CS_D (1 << 2)
@@ -786,7 +776,7 @@
TP_printk("%x:%llx:%s (%s)%s",
__entry->csbase, __entry->rip,
- __print_insn(__entry->insn, __entry->len),
+ __print_hex(__entry->insn, __entry->len),
__print_symbolic(__entry->flags,
kvm_trace_symbol_emul_flags),
__entry->failed ? " failed" : ""
diff --git a/arch/x86/lib/csum-wrappers_64.c b/arch/x86/lib/csum-wrappers_64.c
index 459b58a..25b7ae8 100644
--- a/arch/x86/lib/csum-wrappers_64.c
+++ b/arch/x86/lib/csum-wrappers_64.c
@@ -115,7 +115,7 @@
* @src: source address
* @dst: destination address
* @len: number of bytes to be copied.
- * @isum: initial sum that is added into the result (32bit unfolded)
+ * @sum: initial sum that is added into the result (32bit unfolded)
*
* Returns an 32bit unfolded checksum of the buffer.
*/
diff --git a/arch/x86/lib/msr-reg-export.c b/arch/x86/lib/msr-reg-export.c
index a311cc5..8d6ef78 100644
--- a/arch/x86/lib/msr-reg-export.c
+++ b/arch/x86/lib/msr-reg-export.c
@@ -1,5 +1,5 @@
#include <linux/module.h>
#include <asm/msr.h>
-EXPORT_SYMBOL(native_rdmsr_safe_regs);
-EXPORT_SYMBOL(native_wrmsr_safe_regs);
+EXPORT_SYMBOL(rdmsr_safe_regs);
+EXPORT_SYMBOL(wrmsr_safe_regs);
diff --git a/arch/x86/lib/msr-reg.S b/arch/x86/lib/msr-reg.S
index 69fa106..f6d13ee 100644
--- a/arch/x86/lib/msr-reg.S
+++ b/arch/x86/lib/msr-reg.S
@@ -6,13 +6,13 @@
#ifdef CONFIG_X86_64
/*
- * int native_{rdmsr,wrmsr}_safe_regs(u32 gprs[8]);
+ * int {rdmsr,wrmsr}_safe_regs(u32 gprs[8]);
*
* reg layout: u32 gprs[eax, ecx, edx, ebx, esp, ebp, esi, edi]
*
*/
.macro op_safe_regs op
-ENTRY(native_\op\()_safe_regs)
+ENTRY(\op\()_safe_regs)
CFI_STARTPROC
pushq_cfi %rbx
pushq_cfi %rbp
@@ -45,13 +45,13 @@
_ASM_EXTABLE(1b, 3b)
CFI_ENDPROC
-ENDPROC(native_\op\()_safe_regs)
+ENDPROC(\op\()_safe_regs)
.endm
#else /* X86_32 */
.macro op_safe_regs op
-ENTRY(native_\op\()_safe_regs)
+ENTRY(\op\()_safe_regs)
CFI_STARTPROC
pushl_cfi %ebx
pushl_cfi %ebp
@@ -92,7 +92,7 @@
_ASM_EXTABLE(1b, 3b)
CFI_ENDPROC
-ENDPROC(native_\op\()_safe_regs)
+ENDPROC(\op\()_safe_regs)
.endm
#endif
diff --git a/arch/x86/lib/usercopy.c b/arch/x86/lib/usercopy.c
index 677b1ed..4f74d94 100644
--- a/arch/x86/lib/usercopy.c
+++ b/arch/x86/lib/usercopy.c
@@ -22,7 +22,7 @@
void *map;
int ret;
- if (__range_not_ok(from, n, TASK_SIZE) == 0)
+ if (__range_not_ok(from, n, TASK_SIZE))
return len;
do {
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index bc4e9d8..e0e6990 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -385,7 +385,7 @@
}
#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
+void __init free_initrd_mem(unsigned long start, unsigned long end)
{
/*
* end could be not aligned, and We can not align that,
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index be1ef57..78fe3f1 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -180,7 +180,7 @@
/**
* ioremap_nocache - map bus memory into CPU space
- * @offset: bus address of the memory
+ * @phys_addr: bus address of the memory
* @size: size of the resource to map
*
* ioremap_nocache performs a platform specific sequence of operations to
@@ -217,7 +217,7 @@
/**
* ioremap_wc - map memory into CPU space write combined
- * @offset: bus address of the memory
+ * @phys_addr: bus address of the memory
* @size: size of the resource to map
*
* This version of ioremap ensures that the memory is marked write combining.
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index e1ebde3..a718e0d 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -122,7 +122,7 @@
/**
* clflush_cache_range - flush a cache range with clflush
- * @addr: virtual start address
+ * @vaddr: virtual start address
* @size: number of bytes to flush
*
* clflush is an unordered instruction which needs fencing with mfence
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 303f086..b2b94438 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -312,7 +312,7 @@
goto fail;
}
/* both registers must be reserved */
- if (num_counters == AMD64_NUM_COUNTERS_F15H) {
+ if (num_counters == AMD64_NUM_COUNTERS_CORE) {
msrs->counters[i].addr = MSR_F15H_PERF_CTR + (i << 1);
msrs->controls[i].addr = MSR_F15H_PERF_CTL + (i << 1);
} else {
@@ -514,7 +514,7 @@
ops->create_files = setup_ibs_files;
if (boot_cpu_data.x86 == 0x15) {
- num_counters = AMD64_NUM_COUNTERS_F15H;
+ num_counters = AMD64_NUM_COUNTERS_CORE;
} else {
num_counters = AMD64_NUM_COUNTERS;
}
diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c
index 3c6e328..028454f 100644
--- a/arch/x86/platform/mrst/early_printk_mrst.c
+++ b/arch/x86/platform/mrst/early_printk_mrst.c
@@ -110,19 +110,16 @@
static int dumper_registered;
static void dw_kmsg_dump(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *s1, unsigned long l1,
- const char *s2, unsigned long l2)
+ enum kmsg_dump_reason reason)
{
- int i;
+ static char line[1024];
+ size_t len;
/* When run to this, we'd better re-init the HW */
mrst_early_console_init();
- for (i = 0; i < l1; i++)
- early_mrst_console.write(&early_mrst_console, s1 + i, 1);
- for (i = 0; i < l2; i++)
- early_mrst_console.write(&early_mrst_console, s2 + i, 1);
+ while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len))
+ early_mrst_console.write(&early_mrst_console, line, len);
}
/* Set the ratio rate to 115200, 8n1, IRQ disabled */
diff --git a/arch/x86/platform/olpc/olpc-xo15-sci.c b/arch/x86/platform/olpc/olpc-xo15-sci.c
index 23e5b9d..599be49 100644
--- a/arch/x86/platform/olpc/olpc-xo15-sci.c
+++ b/arch/x86/platform/olpc/olpc-xo15-sci.c
@@ -203,7 +203,7 @@
return 0;
}
-static int xo15_sci_resume(struct acpi_device *device)
+static int xo15_sci_resume(struct device *dev)
{
/* Enable all EC events */
olpc_ec_mask_write(EC_SCI_SRC_ALL);
@@ -215,6 +215,8 @@
return 0;
}
+static SIMPLE_DEV_PM_OPS(xo15_sci_pm, NULL, xo15_sci_resume);
+
static const struct acpi_device_id xo15_sci_device_ids[] = {
{"XO15EC", 0},
{"", 0},
@@ -227,8 +229,8 @@
.ops = {
.add = xo15_sci_add,
.remove = xo15_sci_remove,
- .resume = xo15_sci_resume,
},
+ .drv.pm = &xo15_sci_pm,
};
static int __init xo15_sci_init(void)
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 59880af..71b5d5a 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -1,7 +1,7 @@
/*
* SGI UltraViolet TLB flush routines.
*
- * (c) 2008-2011 Cliff Wickman <cpw@sgi.com>, SGI.
+ * (c) 2008-2012 Cliff Wickman <cpw@sgi.com>, SGI.
*
* This code is released under the GNU General Public License version 2 or
* later.
@@ -38,8 +38,7 @@
static int timeout_us;
static int nobau;
-static int baudisabled;
-static spinlock_t disable_lock;
+static int nobau_perm;
static cycles_t congested_cycles;
/* tunables: */
@@ -47,12 +46,13 @@
static int max_concurr_const = MAX_BAU_CONCURRENT;
static int plugged_delay = PLUGGED_DELAY;
static int plugsb4reset = PLUGSB4RESET;
+static int giveup_limit = GIVEUP_LIMIT;
static int timeoutsb4reset = TIMEOUTSB4RESET;
static int ipi_reset_limit = IPI_RESET_LIMIT;
static int complete_threshold = COMPLETE_THRESHOLD;
static int congested_respns_us = CONGESTED_RESPONSE_US;
static int congested_reps = CONGESTED_REPS;
-static int congested_period = CONGESTED_PERIOD;
+static int disabled_period = DISABLED_PERIOD;
static struct tunables tunables[] = {
{&max_concurr, MAX_BAU_CONCURRENT}, /* must be [0] */
@@ -63,7 +63,8 @@
{&complete_threshold, COMPLETE_THRESHOLD},
{&congested_respns_us, CONGESTED_RESPONSE_US},
{&congested_reps, CONGESTED_REPS},
- {&congested_period, CONGESTED_PERIOD}
+ {&disabled_period, DISABLED_PERIOD},
+ {&giveup_limit, GIVEUP_LIMIT}
};
static struct dentry *tunables_dir;
@@ -120,6 +121,40 @@
static DEFINE_PER_CPU(struct bau_control, bau_control);
static DEFINE_PER_CPU(cpumask_var_t, uv_flush_tlb_mask);
+static void
+set_bau_on(void)
+{
+ int cpu;
+ struct bau_control *bcp;
+
+ if (nobau_perm) {
+ pr_info("BAU not initialized; cannot be turned on\n");
+ return;
+ }
+ nobau = 0;
+ for_each_present_cpu(cpu) {
+ bcp = &per_cpu(bau_control, cpu);
+ bcp->nobau = 0;
+ }
+ pr_info("BAU turned on\n");
+ return;
+}
+
+static void
+set_bau_off(void)
+{
+ int cpu;
+ struct bau_control *bcp;
+
+ nobau = 1;
+ for_each_present_cpu(cpu) {
+ bcp = &per_cpu(bau_control, cpu);
+ bcp->nobau = 1;
+ }
+ pr_info("BAU turned off\n");
+ return;
+}
+
/*
* Determine the first node on a uvhub. 'Nodes' are used for kernel
* memory allocation.
@@ -278,7 +313,7 @@
* Both sockets dump their completed count total into
* the message's count.
*/
- smaster->socket_acknowledge_count[mdp->msg_slot] = 0;
+ *sp = 0;
asp = (struct atomic_short *)&msg->acknowledge_count;
msg_ack_count = atom_asr(socket_ack_count, asp);
@@ -491,16 +526,15 @@
}
/*
- * UV2 has an extra bit of status in the ACTIVATION_STATUS_2 register.
+ * UV2 could have an extra bit of status in the ACTIVATION_STATUS_2 register.
+ * But not currently used.
*/
static unsigned long uv2_read_status(unsigned long offset, int rshft, int desc)
{
unsigned long descriptor_status;
- unsigned long descriptor_status2;
- descriptor_status = ((read_lmmr(offset) >> rshft) & UV_ACT_STATUS_MASK);
- descriptor_status2 = (read_mmr_uv2_status() >> desc) & 0x1UL;
- descriptor_status = (descriptor_status << 1) | descriptor_status2;
+ descriptor_status =
+ ((read_lmmr(offset) >> rshft) & UV_ACT_STATUS_MASK) << 1;
return descriptor_status;
}
@@ -531,87 +565,11 @@
*/
int handle_uv2_busy(struct bau_control *bcp)
{
- int busy_one = bcp->using_desc;
- int normal = bcp->uvhub_cpu;
- int selected = -1;
- int i;
- unsigned long descriptor_status;
- unsigned long status;
- int mmr_offset;
- struct bau_desc *bau_desc_old;
- struct bau_desc *bau_desc_new;
- struct bau_control *hmaster = bcp->uvhub_master;
struct ptc_stats *stat = bcp->statp;
- cycles_t ttm;
stat->s_uv2_wars++;
- spin_lock(&hmaster->uvhub_lock);
- /* try for the original first */
- if (busy_one != normal) {
- if (!normal_busy(bcp))
- selected = normal;
- }
- if (selected < 0) {
- /* can't use the normal, select an alternate */
- mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_1;
- descriptor_status = read_lmmr(mmr_offset);
-
- /* scan available descriptors 32-63 */
- for (i = 0; i < UV_CPUS_PER_AS; i++) {
- if ((hmaster->inuse_map & (1 << i)) == 0) {
- status = ((descriptor_status >>
- (i * UV_ACT_STATUS_SIZE)) &
- UV_ACT_STATUS_MASK) << 1;
- if (status != UV2H_DESC_BUSY) {
- selected = i + UV_CPUS_PER_AS;
- break;
- }
- }
- }
- }
-
- if (busy_one != normal)
- /* mark the busy alternate as not in-use */
- hmaster->inuse_map &= ~(1 << (busy_one - UV_CPUS_PER_AS));
-
- if (selected >= 0) {
- /* switch to the selected descriptor */
- if (selected != normal) {
- /* set the selected alternate as in-use */
- hmaster->inuse_map |=
- (1 << (selected - UV_CPUS_PER_AS));
- if (selected > stat->s_uv2_wars_hw)
- stat->s_uv2_wars_hw = selected;
- }
- bau_desc_old = bcp->descriptor_base;
- bau_desc_old += (ITEMS_PER_DESC * busy_one);
- bcp->using_desc = selected;
- bau_desc_new = bcp->descriptor_base;
- bau_desc_new += (ITEMS_PER_DESC * selected);
- *bau_desc_new = *bau_desc_old;
- } else {
- /*
- * All are busy. Wait for the normal one for this cpu to
- * free up.
- */
- stat->s_uv2_war_waits++;
- spin_unlock(&hmaster->uvhub_lock);
- ttm = get_cycles();
- do {
- cpu_relax();
- } while (normal_busy(bcp));
- spin_lock(&hmaster->uvhub_lock);
- /* switch to the original descriptor */
- bcp->using_desc = normal;
- bau_desc_old = bcp->descriptor_base;
- bau_desc_old += (ITEMS_PER_DESC * bcp->using_desc);
- bcp->using_desc = (ITEMS_PER_DESC * normal);
- bau_desc_new = bcp->descriptor_base;
- bau_desc_new += (ITEMS_PER_DESC * normal);
- *bau_desc_new = *bau_desc_old; /* copy the entire descriptor */
- }
- spin_unlock(&hmaster->uvhub_lock);
- return FLUSH_RETRY_BUSYBUG;
+ bcp->busy = 1;
+ return FLUSH_GIVEUP;
}
static int uv2_wait_completion(struct bau_desc *bau_desc,
@@ -620,7 +578,7 @@
{
unsigned long descriptor_stat;
cycles_t ttm;
- int desc = bcp->using_desc;
+ int desc = bcp->uvhub_cpu;
long busy_reps = 0;
struct ptc_stats *stat = bcp->statp;
@@ -628,24 +586,38 @@
/* spin on the status MMR, waiting for it to go idle */
while (descriptor_stat != UV2H_DESC_IDLE) {
- /*
- * Our software ack messages may be blocked because
- * there are no swack resources available. As long
- * as none of them has timed out hardware will NACK
- * our message and its state will stay IDLE.
- */
- if ((descriptor_stat == UV2H_DESC_SOURCE_TIMEOUT) ||
- (descriptor_stat == UV2H_DESC_DEST_PUT_ERR)) {
+ if ((descriptor_stat == UV2H_DESC_SOURCE_TIMEOUT)) {
+ /*
+ * A h/w bug on the destination side may
+ * have prevented the message being marked
+ * pending, thus it doesn't get replied to
+ * and gets continually nacked until it times
+ * out with a SOURCE_TIMEOUT.
+ */
stat->s_stimeout++;
return FLUSH_GIVEUP;
- } else if (descriptor_stat == UV2H_DESC_DEST_STRONG_NACK) {
- stat->s_strongnacks++;
- bcp->conseccompletes = 0;
- return FLUSH_GIVEUP;
} else if (descriptor_stat == UV2H_DESC_DEST_TIMEOUT) {
+ ttm = get_cycles();
+
+ /*
+ * Our retries may be blocked by all destination
+ * swack resources being consumed, and a timeout
+ * pending. In that case hardware returns the
+ * ERROR that looks like a destination timeout.
+ * Without using the extended status we have to
+ * deduce from the short time that this was a
+ * strong nack.
+ */
+ if (cycles_2_us(ttm - bcp->send_message) < timeout_us) {
+ bcp->conseccompletes = 0;
+ stat->s_plugged++;
+ /* FLUSH_RETRY_PLUGGED causes hang on boot */
+ return FLUSH_GIVEUP;
+ }
stat->s_dtimeout++;
bcp->conseccompletes = 0;
- return FLUSH_RETRY_TIMEOUT;
+ /* FLUSH_RETRY_TIMEOUT causes hang on boot */
+ return FLUSH_GIVEUP;
} else {
busy_reps++;
if (busy_reps > 1000000) {
@@ -653,9 +625,8 @@
busy_reps = 0;
ttm = get_cycles();
if ((ttm - bcp->send_message) >
- (bcp->clocks_per_100_usec)) {
+ bcp->timeout_interval)
return handle_uv2_busy(bcp);
- }
}
/*
* descriptor_stat is still BUSY
@@ -679,7 +650,7 @@
{
int right_shift;
unsigned long mmr_offset;
- int desc = bcp->using_desc;
+ int desc = bcp->uvhub_cpu;
if (desc < UV_CPUS_PER_AS) {
mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_0;
@@ -758,33 +729,31 @@
}
/*
- * Completions are taking a very long time due to a congested numalink
- * network.
+ * Stop all cpus on a uvhub from using the BAU for a period of time.
+ * This is reversed by check_enable.
*/
-static void disable_for_congestion(struct bau_control *bcp,
- struct ptc_stats *stat)
+static void disable_for_period(struct bau_control *bcp, struct ptc_stats *stat)
{
- /* let only one cpu do this disabling */
- spin_lock(&disable_lock);
+ int tcpu;
+ struct bau_control *tbcp;
+ struct bau_control *hmaster;
+ cycles_t tm1;
- if (!baudisabled && bcp->period_requests &&
- ((bcp->period_time / bcp->period_requests) > congested_cycles)) {
- int tcpu;
- struct bau_control *tbcp;
- /* it becomes this cpu's job to turn on the use of the
- BAU again */
- baudisabled = 1;
- bcp->set_bau_off = 1;
- bcp->set_bau_on_time = get_cycles();
- bcp->set_bau_on_time += sec_2_cycles(bcp->cong_period);
+ hmaster = bcp->uvhub_master;
+ spin_lock(&hmaster->disable_lock);
+ if (!bcp->baudisabled) {
stat->s_bau_disabled++;
+ tm1 = get_cycles();
for_each_present_cpu(tcpu) {
tbcp = &per_cpu(bau_control, tcpu);
- tbcp->baudisabled = 1;
+ if (tbcp->uvhub_master == hmaster) {
+ tbcp->baudisabled = 1;
+ tbcp->set_bau_on_time =
+ tm1 + bcp->disabled_period;
+ }
}
}
-
- spin_unlock(&disable_lock);
+ spin_unlock(&hmaster->disable_lock);
}
static void count_max_concurr(int stat, struct bau_control *bcp,
@@ -815,16 +784,30 @@
bcp->period_requests++;
bcp->period_time += elapsed;
if ((elapsed > congested_cycles) &&
- (bcp->period_requests > bcp->cong_reps))
- disable_for_congestion(bcp, stat);
+ (bcp->period_requests > bcp->cong_reps) &&
+ ((bcp->period_time / bcp->period_requests) >
+ congested_cycles)) {
+ stat->s_congested++;
+ disable_for_period(bcp, stat);
+ }
}
} else
stat->s_requestor--;
if (completion_status == FLUSH_COMPLETE && try > 1)
stat->s_retriesok++;
- else if (completion_status == FLUSH_GIVEUP)
+ else if (completion_status == FLUSH_GIVEUP) {
stat->s_giveup++;
+ if (get_cycles() > bcp->period_end)
+ bcp->period_giveups = 0;
+ bcp->period_giveups++;
+ if (bcp->period_giveups == 1)
+ bcp->period_end = get_cycles() + bcp->disabled_period;
+ if (bcp->period_giveups > bcp->giveup_limit) {
+ disable_for_period(bcp, stat);
+ stat->s_giveuplimit++;
+ }
+ }
}
/*
@@ -868,7 +851,8 @@
* Returns 1 if it gives up entirely and the original cpu mask is to be
* returned to the kernel.
*/
-int uv_flush_send_and_wait(struct cpumask *flush_mask, struct bau_control *bcp)
+int uv_flush_send_and_wait(struct cpumask *flush_mask, struct bau_control *bcp,
+ struct bau_desc *bau_desc)
{
int seq_number = 0;
int completion_stat = 0;
@@ -881,24 +865,23 @@
struct bau_control *hmaster = bcp->uvhub_master;
struct uv1_bau_msg_header *uv1_hdr = NULL;
struct uv2_bau_msg_header *uv2_hdr = NULL;
- struct bau_desc *bau_desc;
- if (bcp->uvhub_version == 1)
+ if (bcp->uvhub_version == 1) {
+ uv1 = 1;
uv1_throttle(hmaster, stat);
+ }
while (hmaster->uvhub_quiesce)
cpu_relax();
time1 = get_cycles();
+ if (uv1)
+ uv1_hdr = &bau_desc->header.uv1_hdr;
+ else
+ uv2_hdr = &bau_desc->header.uv2_hdr;
+
do {
- bau_desc = bcp->descriptor_base;
- bau_desc += (ITEMS_PER_DESC * bcp->using_desc);
- if (bcp->uvhub_version == 1) {
- uv1 = 1;
- uv1_hdr = &bau_desc->header.uv1_hdr;
- } else
- uv2_hdr = &bau_desc->header.uv2_hdr;
- if ((try == 0) || (completion_stat == FLUSH_RETRY_BUSYBUG)) {
+ if (try == 0) {
if (uv1)
uv1_hdr->msg_type = MSG_REGULAR;
else
@@ -916,25 +899,24 @@
uv1_hdr->sequence = seq_number;
else
uv2_hdr->sequence = seq_number;
- index = (1UL << AS_PUSH_SHIFT) | bcp->using_desc;
+ index = (1UL << AS_PUSH_SHIFT) | bcp->uvhub_cpu;
bcp->send_message = get_cycles();
write_mmr_activation(index);
try++;
completion_stat = wait_completion(bau_desc, bcp, try);
- /* UV2: wait_completion() may change the bcp->using_desc */
handle_cmplt(completion_stat, bau_desc, bcp, hmaster, stat);
if (bcp->ipi_attempts >= bcp->ipi_reset_limit) {
bcp->ipi_attempts = 0;
+ stat->s_overipilimit++;
completion_stat = FLUSH_GIVEUP;
break;
}
cpu_relax();
} while ((completion_stat == FLUSH_RETRY_PLUGGED) ||
- (completion_stat == FLUSH_RETRY_BUSYBUG) ||
(completion_stat == FLUSH_RETRY_TIMEOUT));
time2 = get_cycles();
@@ -955,28 +937,33 @@
}
/*
- * The BAU is disabled. When the disabled time period has expired, the cpu
- * that disabled it must re-enable it.
- * Return 0 if it is re-enabled for all cpus.
+ * The BAU is disabled for this uvhub. When the disabled time period has
+ * expired re-enable it.
+ * Return 0 if it is re-enabled for all cpus on this uvhub.
*/
static int check_enable(struct bau_control *bcp, struct ptc_stats *stat)
{
int tcpu;
struct bau_control *tbcp;
+ struct bau_control *hmaster;
- if (bcp->set_bau_off) {
- if (get_cycles() >= bcp->set_bau_on_time) {
- stat->s_bau_reenabled++;
- baudisabled = 0;
- for_each_present_cpu(tcpu) {
- tbcp = &per_cpu(bau_control, tcpu);
+ hmaster = bcp->uvhub_master;
+ spin_lock(&hmaster->disable_lock);
+ if (bcp->baudisabled && (get_cycles() >= bcp->set_bau_on_time)) {
+ stat->s_bau_reenabled++;
+ for_each_present_cpu(tcpu) {
+ tbcp = &per_cpu(bau_control, tcpu);
+ if (tbcp->uvhub_master == hmaster) {
tbcp->baudisabled = 0;
tbcp->period_requests = 0;
tbcp->period_time = 0;
+ tbcp->period_giveups = 0;
}
- return 0;
}
+ spin_unlock(&hmaster->disable_lock);
+ return 0;
}
+ spin_unlock(&hmaster->disable_lock);
return -1;
}
@@ -1078,18 +1065,32 @@
struct cpumask *flush_mask;
struct ptc_stats *stat;
struct bau_control *bcp;
-
- /* kernel was booted 'nobau' */
- if (nobau)
- return cpumask;
+ unsigned long descriptor_status;
+ unsigned long status;
bcp = &per_cpu(bau_control, cpu);
stat = bcp->statp;
+ stat->s_enters++;
+
+ if (bcp->nobau)
+ return cpumask;
+
+ if (bcp->busy) {
+ descriptor_status =
+ read_lmmr(UVH_LB_BAU_SB_ACTIVATION_STATUS_0);
+ status = ((descriptor_status >> (bcp->uvhub_cpu *
+ UV_ACT_STATUS_SIZE)) & UV_ACT_STATUS_MASK) << 1;
+ if (status == UV2H_DESC_BUSY)
+ return cpumask;
+ bcp->busy = 0;
+ }
/* bau was disabled due to slow response */
if (bcp->baudisabled) {
- if (check_enable(bcp, stat))
+ if (check_enable(bcp, stat)) {
+ stat->s_ipifordisabled++;
return cpumask;
+ }
}
/*
@@ -1105,7 +1106,7 @@
stat->s_ntargself++;
bau_desc = bcp->descriptor_base;
- bau_desc += (ITEMS_PER_DESC * bcp->using_desc);
+ bau_desc += (ITEMS_PER_DESC * bcp->uvhub_cpu);
bau_uvhubs_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE);
if (set_distrib_bits(flush_mask, bcp, bau_desc, &locals, &remotes))
return NULL;
@@ -1118,25 +1119,27 @@
* uv_flush_send_and_wait returns 0 if all cpu's were messaged,
* or 1 if it gave up and the original cpumask should be returned.
*/
- if (!uv_flush_send_and_wait(flush_mask, bcp))
+ if (!uv_flush_send_and_wait(flush_mask, bcp, bau_desc))
return NULL;
else
return cpumask;
}
/*
- * Search the message queue for any 'other' message with the same software
- * acknowledge resource bit vector.
+ * Search the message queue for any 'other' unprocessed message with the
+ * same software acknowledge resource bit vector as the 'msg' message.
*/
struct bau_pq_entry *find_another_by_swack(struct bau_pq_entry *msg,
- struct bau_control *bcp, unsigned char swack_vec)
+ struct bau_control *bcp)
{
struct bau_pq_entry *msg_next = msg + 1;
+ unsigned char swack_vec = msg->swack_vec;
if (msg_next > bcp->queue_last)
msg_next = bcp->queue_first;
- while ((msg_next->swack_vec != 0) && (msg_next != msg)) {
- if (msg_next->swack_vec == swack_vec)
+ while (msg_next != msg) {
+ if ((msg_next->canceled == 0) && (msg_next->replied_to == 0) &&
+ (msg_next->swack_vec == swack_vec))
return msg_next;
msg_next++;
if (msg_next > bcp->queue_last)
@@ -1165,32 +1168,30 @@
* This message was assigned a swack resource, but no
* reserved acknowlegment is pending.
* The bug has prevented this message from setting the MMR.
- * And no other message has used the same sw_ack resource.
- * Do the requested shootdown but do not reply to the msg.
- * (the 0 means make no acknowledge)
*/
- bau_process_message(mdp, bcp, 0);
- return;
- }
-
- /*
- * Some message has set the MMR 'pending' bit; it might have been
- * another message. Look for that message.
- */
- other_msg = find_another_by_swack(msg, bcp, msg->swack_vec);
- if (other_msg) {
- /* There is another. Do not ack the current one. */
- bau_process_message(mdp, bcp, 0);
/*
- * Let the natural processing of that message acknowledge
- * it. Don't get the processing of sw_ack's out of order.
+ * Some message has set the MMR 'pending' bit; it might have
+ * been another message. Look for that message.
*/
- return;
+ other_msg = find_another_by_swack(msg, bcp);
+ if (other_msg) {
+ /*
+ * There is another. Process this one but do not
+ * ack it.
+ */
+ bau_process_message(mdp, bcp, 0);
+ /*
+ * Let the natural processing of that other message
+ * acknowledge it. Don't get the processing of sw_ack's
+ * out of order.
+ */
+ return;
+ }
}
/*
- * There is no other message using this sw_ack, so it is safe to
- * acknowledge it.
+ * Either the MMR shows this one pending a reply or there is no
+ * other message using this sw_ack, so it is safe to acknowledge it.
*/
bau_process_message(mdp, bcp, 1);
@@ -1295,7 +1296,8 @@
*/
mmr_image |= (1L << SOFTACK_MSHIFT);
if (is_uv2_hub()) {
- mmr_image |= (1L << UV2_EXT_SHFT);
+ /* hw bug workaround; do not use extended status */
+ mmr_image &= ~(1L << UV2_EXT_SHFT);
}
write_mmr_misc_control(pnode, mmr_image);
}
@@ -1338,29 +1340,34 @@
static int ptc_seq_show(struct seq_file *file, void *data)
{
struct ptc_stats *stat;
+ struct bau_control *bcp;
int cpu;
cpu = *(loff_t *)data;
if (!cpu) {
seq_printf(file,
- "# cpu sent stime self locals remotes ncpus localhub ");
+ "# cpu bauoff sent stime self locals remotes ncpus localhub ");
seq_printf(file,
"remotehub numuvhubs numuvhubs16 numuvhubs8 ");
seq_printf(file,
- "numuvhubs4 numuvhubs2 numuvhubs1 dto snacks retries rok ");
+ "numuvhubs4 numuvhubs2 numuvhubs1 dto snacks retries ");
seq_printf(file,
- "resetp resett giveup sto bz throt swack recv rtime ");
+ "rok resetp resett giveup sto bz throt disable ");
seq_printf(file,
- "all one mult none retry canc nocan reset rcan ");
+ "enable wars warshw warwaits enters ipidis plugged ");
seq_printf(file,
- "disable enable wars warshw warwaits\n");
+ "ipiover glim cong swack recv rtime all one mult ");
+ seq_printf(file,
+ "none retry canc nocan reset rcan\n");
}
if (cpu < num_possible_cpus() && cpu_online(cpu)) {
- stat = &per_cpu(ptcstats, cpu);
+ bcp = &per_cpu(bau_control, cpu);
+ stat = bcp->statp;
/* source side statistics */
seq_printf(file,
- "cpu %d %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld ",
- cpu, stat->s_requestor, cycles_2_us(stat->s_time),
+ "cpu %d %d %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld ",
+ cpu, bcp->nobau, stat->s_requestor,
+ cycles_2_us(stat->s_time),
stat->s_ntargself, stat->s_ntarglocals,
stat->s_ntargremotes, stat->s_ntargcpu,
stat->s_ntarglocaluvhub, stat->s_ntargremoteuvhub,
@@ -1374,20 +1381,23 @@
stat->s_resets_plug, stat->s_resets_timeout,
stat->s_giveup, stat->s_stimeout,
stat->s_busy, stat->s_throttles);
+ seq_printf(file, "%ld %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld ",
+ stat->s_bau_disabled, stat->s_bau_reenabled,
+ stat->s_uv2_wars, stat->s_uv2_wars_hw,
+ stat->s_uv2_war_waits, stat->s_enters,
+ stat->s_ipifordisabled, stat->s_plugged,
+ stat->s_overipilimit, stat->s_giveuplimit,
+ stat->s_congested);
/* destination side statistics */
seq_printf(file,
- "%lx %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld ",
+ "%lx %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld\n",
read_gmmr_sw_ack(uv_cpu_to_pnode(cpu)),
stat->d_requestee, cycles_2_us(stat->d_time),
stat->d_alltlb, stat->d_onetlb, stat->d_multmsg,
stat->d_nomsg, stat->d_retries, stat->d_canceled,
stat->d_nocanceled, stat->d_resets,
stat->d_rcanceled);
- seq_printf(file, "%ld %ld %ld %ld %ld\n",
- stat->s_bau_disabled, stat->s_bau_reenabled,
- stat->s_uv2_wars, stat->s_uv2_wars_hw,
- stat->s_uv2_war_waits);
}
return 0;
}
@@ -1401,13 +1411,14 @@
char *buf;
int ret;
- buf = kasprintf(GFP_KERNEL, "%s %s %s\n%d %d %d %d %d %d %d %d %d\n",
- "max_concur plugged_delay plugsb4reset",
- "timeoutsb4reset ipi_reset_limit complete_threshold",
- "congested_response_us congested_reps congested_period",
+ buf = kasprintf(GFP_KERNEL, "%s %s %s\n%d %d %d %d %d %d %d %d %d %d\n",
+ "max_concur plugged_delay plugsb4reset timeoutsb4reset",
+ "ipi_reset_limit complete_threshold congested_response_us",
+ "congested_reps disabled_period giveup_limit",
max_concurr, plugged_delay, plugsb4reset,
timeoutsb4reset, ipi_reset_limit, complete_threshold,
- congested_respns_us, congested_reps, congested_period);
+ congested_respns_us, congested_reps, disabled_period,
+ giveup_limit);
if (!buf)
return -ENOMEM;
@@ -1438,6 +1449,14 @@
return -EFAULT;
optstr[count - 1] = '\0';
+ if (!strcmp(optstr, "on")) {
+ set_bau_on();
+ return count;
+ } else if (!strcmp(optstr, "off")) {
+ set_bau_off();
+ return count;
+ }
+
if (strict_strtol(optstr, 10, &input_arg) < 0) {
printk(KERN_DEBUG "%s is invalid\n", optstr);
return -EINVAL;
@@ -1570,7 +1589,8 @@
bcp->complete_threshold = complete_threshold;
bcp->cong_response_us = congested_respns_us;
bcp->cong_reps = congested_reps;
- bcp->cong_period = congested_period;
+ bcp->disabled_period = sec_2_cycles(disabled_period);
+ bcp->giveup_limit = giveup_limit;
}
return count;
}
@@ -1699,6 +1719,10 @@
* fairness chaining multilevel count replied_to
*/
} else {
+ /*
+ * BIOS uses legacy mode, but UV2 hardware always
+ * uses native mode for selective broadcasts.
+ */
uv2_hdr = &bd2->header.uv2_hdr;
uv2_hdr->swack_flag = 1;
uv2_hdr->base_dest_nasid =
@@ -1811,8 +1835,8 @@
index = (mmr_image >> BAU_URGENCY_7_SHIFT) & BAU_URGENCY_7_MASK;
mmr_image = uv_read_local_mmr(UVH_TRANSACTION_TIMEOUT);
mult2 = (mmr_image >> BAU_TRANS_SHIFT) & BAU_TRANS_MASK;
- base = timeout_base_ns[index];
- ts_ns = base * mult1 * mult2;
+ ts_ns = timeout_base_ns[index];
+ ts_ns *= (mult1 * mult2);
ret = ts_ns / 1000;
} else {
/* 4 bits 0/1 for 10/80us base, 3 bits of multiplier */
@@ -1836,6 +1860,8 @@
for_each_present_cpu(cpu) {
bcp = &per_cpu(bau_control, cpu);
bcp->baudisabled = 0;
+ if (nobau)
+ bcp->nobau = 1;
bcp->statp = &per_cpu(ptcstats, cpu);
/* time interval to catch a hardware stay-busy bug */
bcp->timeout_interval = usec_2_cycles(2*timeout_us);
@@ -1848,10 +1874,11 @@
bcp->complete_threshold = complete_threshold;
bcp->cong_response_us = congested_respns_us;
bcp->cong_reps = congested_reps;
- bcp->cong_period = congested_period;
- bcp->clocks_per_100_usec = usec_2_cycles(100);
+ bcp->disabled_period = sec_2_cycles(disabled_period);
+ bcp->giveup_limit = giveup_limit;
spin_lock_init(&bcp->queue_lock);
spin_lock_init(&bcp->uvhub_lock);
+ spin_lock_init(&bcp->disable_lock);
}
}
@@ -1972,7 +1999,6 @@
}
bcp->uvhub_master = *hmasterp;
bcp->uvhub_cpu = uv_cpu_hub_info(cpu)->blade_processor_id;
- bcp->using_desc = bcp->uvhub_cpu;
if (bcp->uvhub_cpu >= MAX_CPUS_PER_UVHUB) {
printk(KERN_EMERG "%d cpus per uvhub invalid\n",
bcp->uvhub_cpu);
@@ -2069,16 +2095,12 @@
if (!is_uv_system())
return 0;
- if (nobau)
- return 0;
-
for_each_possible_cpu(cur_cpu) {
mask = &per_cpu(uv_flush_tlb_mask, cur_cpu);
zalloc_cpumask_var_node(mask, GFP_KERNEL, cpu_to_node(cur_cpu));
}
nuvhubs = uv_num_possible_blades();
- spin_lock_init(&disable_lock);
congested_cycles = usec_2_cycles(congested_respns_us);
uv_base_pnode = 0x7fffffff;
@@ -2091,7 +2113,8 @@
enable_timeouts();
if (init_per_cpu(nuvhubs, uv_base_pnode)) {
- nobau = 1;
+ set_bau_off();
+ nobau_perm = 1;
return 0;
}
diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c
index f25c276..acf7752 100644
--- a/arch/x86/platform/uv/uv_irq.c
+++ b/arch/x86/platform/uv/uv_irq.c
@@ -135,6 +135,7 @@
unsigned long mmr_value;
struct uv_IO_APIC_route_entry *entry;
int mmr_pnode, err;
+ unsigned int dest;
BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) !=
sizeof(unsigned long));
@@ -143,6 +144,10 @@
if (err != 0)
return err;
+ err = apic->cpu_mask_to_apicid_and(eligible_cpu, eligible_cpu, &dest);
+ if (err != 0)
+ return err;
+
if (limit == UV_AFFINITY_CPU)
irq_set_status_flags(irq, IRQ_NO_BALANCING);
else
@@ -159,7 +164,7 @@
entry->polarity = 0;
entry->trigger = 0;
entry->mask = 0;
- entry->dest = apic->cpu_mask_to_apicid(eligible_cpu);
+ entry->dest = dest;
mmr_pnode = uv_blade_to_pnode(mmr_blade);
uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
@@ -222,7 +227,7 @@
if (cfg->move_in_progress)
send_cleanup_vector(cfg);
- return 0;
+ return IRQ_SET_MASK_OK_NOCOPY;
}
/*
diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile
index 5b84a2d..b2d534c 100644
--- a/arch/x86/realmode/rm/Makefile
+++ b/arch/x86/realmode/rm/Makefile
@@ -22,7 +22,7 @@
realmode-y += header.o
realmode-y += trampoline_$(BITS).o
realmode-y += stack.o
-realmode-$(CONFIG_X86_32) += reboot_32.o
+realmode-y += reboot.o
realmode-$(CONFIG_ACPI_SLEEP) += $(wakeup-objs)
targets += $(realmode-y)
diff --git a/arch/x86/realmode/rm/header.S b/arch/x86/realmode/rm/header.S
index fadf483..a28221d 100644
--- a/arch/x86/realmode/rm/header.S
+++ b/arch/x86/realmode/rm/header.S
@@ -6,6 +6,7 @@
#include <linux/linkage.h>
#include <asm/page_types.h>
+#include <asm/segment.h>
#include "realmode.h"
@@ -28,8 +29,9 @@
.long pa_wakeup_header
#endif
/* APM/BIOS reboot */
-#ifdef CONFIG_X86_32
.long pa_machine_real_restart_asm
+#ifdef CONFIG_X86_64
+ .long __KERNEL32_CS
#endif
END(real_mode_header)
diff --git a/arch/x86/realmode/rm/reboot_32.S b/arch/x86/realmode/rm/reboot.S
similarity index 85%
rename from arch/x86/realmode/rm/reboot_32.S
rename to arch/x86/realmode/rm/reboot.S
index 1140448..f932ea6 100644
--- a/arch/x86/realmode/rm/reboot_32.S
+++ b/arch/x86/realmode/rm/reboot.S
@@ -2,6 +2,8 @@
#include <linux/init.h>
#include <asm/segment.h>
#include <asm/page_types.h>
+#include <asm/processor-flags.h>
+#include <asm/msr-index.h>
#include "realmode.h"
/*
@@ -12,13 +14,35 @@
* doesn't work with at least one type of 486 motherboard. It is easy
* to stop this code working; hence the copious comments.
*
- * This code is called with the restart type (0 = BIOS, 1 = APM) in %eax.
+ * This code is called with the restart type (0 = BIOS, 1 = APM) in
+ * the primary argument register (%eax for 32 bit, %edi for 64 bit).
*/
.section ".text32", "ax"
.code32
-
- .balign 16
ENTRY(machine_real_restart_asm)
+
+#ifdef CONFIG_X86_64
+ /* Switch to trampoline GDT as it is guaranteed < 4 GiB */
+ movl $__KERNEL_DS, %eax
+ movl %eax, %ds
+ lgdtl pa_tr_gdt
+
+ /* Disable paging to drop us out of long mode */
+ movl %cr0, %eax
+ andl $~X86_CR0_PG, %eax
+ movl %eax, %cr0
+ ljmpl $__KERNEL32_CS, $pa_machine_real_restart_paging_off
+
+GLOBAL(machine_real_restart_paging_off)
+ xorl %eax, %eax
+ xorl %edx, %edx
+ movl $MSR_EFER, %ecx
+ wrmsr
+
+ movl %edi, %eax
+
+#endif /* CONFIG_X86_64 */
+
/* Set up the IDT for real mode. */
lidtl pa_machine_real_restart_idt
diff --git a/arch/x86/um/sys_call_table_32.c b/arch/x86/um/sys_call_table_32.c
index 416bd40..68d1dc9 100644
--- a/arch/x86/um/sys_call_table_32.c
+++ b/arch/x86/um/sys_call_table_32.c
@@ -39,9 +39,9 @@
#undef __SYSCALL_I386
#define __SYSCALL_I386(nr, sym, compat) [ nr ] = sym,
-typedef void (*sys_call_ptr_t)(void);
+typedef asmlinkage void (*sys_call_ptr_t)(void);
-extern void sys_ni_syscall(void);
+extern asmlinkage void sys_ni_syscall(void);
const sys_call_ptr_t sys_call_table[] __cacheline_aligned = {
/*
diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/vdso/vdso32-setup.c
index 66e6d93..0faad64 100644
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/vdso/vdso32-setup.c
@@ -205,9 +205,9 @@
{
/* Load these always in case some future AMD CPU supports
SYSENTER from compat mode too. */
- checking_wrmsrl(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
- checking_wrmsrl(MSR_IA32_SYSENTER_ESP, 0ULL);
- checking_wrmsrl(MSR_IA32_SYSENTER_EIP, (u64)ia32_sysenter_target);
+ wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
+ wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
+ wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)ia32_sysenter_target);
wrmsrl(MSR_CSTAR, ia32_cstar_target);
}
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index e74df95..ed7d549 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -209,6 +209,9 @@
xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
}
+#define CPUID_THERM_POWER_LEAF 6
+#define APERFMPERF_PRESENT 0
+
static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0;
static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0;
@@ -242,6 +245,11 @@
*dx = cpuid_leaf5_edx_val;
return;
+ case CPUID_THERM_POWER_LEAF:
+ /* Disabling APERFMPERF for kernel usage */
+ maskecx = ~(1 << APERFMPERF_PRESENT);
+ break;
+
case 0xb:
/* Suppress extended topology stuff */
maskebx = 0;
@@ -1116,9 +1124,7 @@
.wbinvd = native_wbinvd,
.read_msr = native_read_msr_safe,
- .rdmsr_regs = native_rdmsr_safe_regs,
.write_msr = xen_write_msr_safe,
- .wrmsr_regs = native_wrmsr_safe_regs,
.read_tsc = native_read_tsc,
.read_pmc = native_read_pmc,
diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c
index ffd08c4..64effdc6 100644
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -706,6 +706,7 @@
unsigned long uninitialized_var(address);
unsigned level;
pte_t *ptep = NULL;
+ int ret = 0;
pfn = page_to_pfn(page);
if (!PageHighMem(page)) {
@@ -741,6 +742,24 @@
list_add(&page->lru, &m2p_overrides[mfn_hash(mfn)]);
spin_unlock_irqrestore(&m2p_override_lock, flags);
+ /* p2m(m2p(mfn)) == mfn: the mfn is already present somewhere in
+ * this domain. Set the FOREIGN_FRAME_BIT in the p2m for the other
+ * pfn so that the following mfn_to_pfn(mfn) calls will return the
+ * pfn from the m2p_override (the backend pfn) instead.
+ * We need to do this because the pages shared by the frontend
+ * (xen-blkfront) can be already locked (lock_page, called by
+ * do_read_cache_page); when the userspace backend tries to use them
+ * with direct_IO, mfn_to_pfn returns the pfn of the frontend, so
+ * do_blockdev_direct_IO is going to try to lock the same pages
+ * again resulting in a deadlock.
+ * As a side effect get_user_pages_fast might not be safe on the
+ * frontend pages while they are being shared with the backend,
+ * because mfn_to_pfn (that ends up being called by GUPF) will
+ * return the backend pfn rather than the frontend pfn. */
+ ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
+ if (ret == 0 && get_phys_to_machine(pfn) == mfn)
+ set_phys_to_machine(pfn, FOREIGN_FRAME(mfn));
+
return 0;
}
EXPORT_SYMBOL_GPL(m2p_add_override);
@@ -752,6 +771,7 @@
unsigned long uninitialized_var(address);
unsigned level;
pte_t *ptep = NULL;
+ int ret = 0;
pfn = page_to_pfn(page);
mfn = get_phys_to_machine(pfn);
@@ -821,6 +841,22 @@
} else
set_phys_to_machine(pfn, page->index);
+ /* p2m(m2p(mfn)) == FOREIGN_FRAME(mfn): the mfn is already present
+ * somewhere in this domain, even before being added to the
+ * m2p_override (see comment above in m2p_add_override).
+ * If there are no other entries in the m2p_override corresponding
+ * to this mfn, then remove the FOREIGN_FRAME_BIT from the p2m for
+ * the original pfn (the one shared by the frontend): the backend
+ * cannot do any IO on this page anymore because it has been
+ * unshared. Removing the FOREIGN_FRAME_BIT from the p2m entry of
+ * the original pfn causes mfn_to_pfn(mfn) to return the frontend
+ * pfn again. */
+ mfn &= ~FOREIGN_FRAME_BIT;
+ ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
+ if (ret == 0 && get_phys_to_machine(pfn) == FOREIGN_FRAME(mfn) &&
+ m2p_find_override(mfn) == NULL)
+ set_phys_to_machine(pfn, mfn);
+
return 0;
}
EXPORT_SYMBOL_GPL(m2p_remove_override);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 3ebba07..a4790bf 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -371,7 +371,8 @@
populated = xen_populate_chunk(map, memmap.nr_entries,
max_pfn, &last_pfn, xen_released_pages);
- extra_pages += (xen_released_pages - populated);
+ xen_released_pages -= populated;
+ extra_pages += xen_released_pages;
if (last_pfn > max_pfn) {
max_pfn = min(MAX_DOMAIN_PAGES, last_pfn);
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index afb250d..f58dca7 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -80,9 +80,7 @@
notify_cpu_starting(cpu);
- ipi_call_lock();
set_cpu_online(cpu, true);
- ipi_call_unlock();
this_cpu_write(cpu_state, CPU_ONLINE);
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index 7608559..f973754 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -68,8 +68,8 @@
# Only build variant and/or platform if it includes a Makefile
-buildvar := $(shell test -a $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/)
-buildplf := $(shell test -a $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/)
+buildvar := $(shell test -e $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/)
+buildplf := $(shell test -e $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/)
# Find libgcc.a
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
index 9b306e5..2c8d6a3 100644
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -277,7 +277,7 @@
/* Don't leak any random bits. */
- memset(elfregs, 0, sizeof (elfregs));
+ memset(elfregs, 0, sizeof(*elfregs));
/* Note: PS.EXCM is not set while user task is running; its
* being set in regs->ps is for exception handling convenience.
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index 88ecea3..ee2e208 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -83,7 +83,6 @@
_text = .;
_stext = .;
- _ftext = .;
.text :
{
@@ -112,7 +111,7 @@
EXCEPTION_TABLE(16)
/* Data section */
- _fdata = .;
+ _sdata = .;
RW_DATA_SECTION(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE)
_edata = .;
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index ba150e5..db955179 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -26,11 +26,7 @@
#include <asm/bootparam.h>
#include <asm/page.h>
-
-/* References to section boundaries */
-
-extern char _ftext, _etext, _fdata, _edata, _rodata_end;
-extern char __init_begin, __init_end;
+#include <asm/sections.h>
/*
* mem_reserve(start, end, must_exist)
@@ -197,9 +193,9 @@
reservedpages++;
}
- codesize = (unsigned long) &_etext - (unsigned long) &_ftext;
- datasize = (unsigned long) &_edata - (unsigned long) &_fdata;
- initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
+ codesize = (unsigned long) _etext - (unsigned long) _stext;
+ datasize = (unsigned long) _edata - (unsigned long) _sdata;
+ initsize = (unsigned long) __init_end - (unsigned long) __init_begin;
printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved, "
"%ldk data, %ldk init %ldk highmem)\n",
@@ -237,7 +233,7 @@
void free_initmem(void)
{
- free_reserved_mem(&__init_begin, &__init_end);
- printk("Freeing unused kernel memory: %dk freed\n",
- (&__init_end - &__init_begin) >> 10);
+ free_reserved_mem(__init_begin, __init_end);
+ printk("Freeing unused kernel memory: %zuk freed\n",
+ (__init_end - __init_begin) >> 10);
}
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index 02cf633..e7dee61 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -125,12 +125,8 @@
blkg->pd[i] = pd;
pd->blkg = blkg;
- }
- /* invoke per-policy init */
- for (i = 0; i < BLKCG_MAX_POLS; i++) {
- struct blkcg_policy *pol = blkcg_policy[i];
-
+ /* invoke per-policy init */
if (blkcg_policy_enabled(blkg->q, pol))
pol->pd_init_fn(blkg);
}
@@ -245,10 +241,9 @@
static void blkg_destroy(struct blkcg_gq *blkg)
{
- struct request_queue *q = blkg->q;
struct blkcg *blkcg = blkg->blkcg;
- lockdep_assert_held(q->queue_lock);
+ lockdep_assert_held(blkg->q->queue_lock);
lockdep_assert_held(&blkcg->lock);
/* Something wrong if we are trying to remove same group twice */
diff --git a/block/blk-core.c b/block/blk-core.c
index 3c923a7..93eb3e4 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -361,9 +361,10 @@
*/
void blk_drain_queue(struct request_queue *q, bool drain_all)
{
+ int i;
+
while (true) {
bool drain = false;
- int i;
spin_lock_irq(q->queue_lock);
@@ -408,6 +409,18 @@
break;
msleep(10);
}
+
+ /*
+ * With queue marked dead, any woken up waiter will fail the
+ * allocation path, so the wakeup chaining is lost and we're
+ * left with hung waiters. We need to wake up those waiters.
+ */
+ if (q->request_fn) {
+ spin_lock_irq(q->queue_lock);
+ for (i = 0; i < ARRAY_SIZE(q->rq.wait); i++)
+ wake_up_all(&q->rq.wait[i]);
+ spin_unlock_irq(q->queue_lock);
+ }
}
/**
@@ -467,7 +480,6 @@
/* mark @q DEAD, no new request or merges will be allowed afterwards */
mutex_lock(&q->sysfs_lock);
queue_flag_set_unlocked(QUEUE_FLAG_DEAD, q);
-
spin_lock_irq(lock);
/*
@@ -485,10 +497,6 @@
queue_flag_set(QUEUE_FLAG_NOMERGES, q);
queue_flag_set(QUEUE_FLAG_NOXMERGES, q);
queue_flag_set(QUEUE_FLAG_DEAD, q);
-
- if (q->queue_lock != &q->__queue_lock)
- q->queue_lock = &q->__queue_lock;
-
spin_unlock_irq(lock);
mutex_unlock(&q->sysfs_lock);
@@ -499,6 +507,11 @@
del_timer_sync(&q->backing_dev_info.laptop_mode_wb_timer);
blk_sync_queue(q);
+ spin_lock_irq(lock);
+ if (q->queue_lock != &q->__queue_lock)
+ q->queue_lock = &q->__queue_lock;
+ spin_unlock_irq(lock);
+
/* @q is and will stay empty, shutdown and put */
blk_put_queue(q);
}
diff --git a/block/blk-timeout.c b/block/blk-timeout.c
index 7803548..6e4744c 100644
--- a/block/blk-timeout.c
+++ b/block/blk-timeout.c
@@ -197,44 +197,3 @@
mod_timer(&q->timeout, expiry);
}
-/**
- * blk_abort_queue -- Abort all request on given queue
- * @queue: pointer to queue
- *
- */
-void blk_abort_queue(struct request_queue *q)
-{
- unsigned long flags;
- struct request *rq, *tmp;
- LIST_HEAD(list);
-
- /*
- * Not a request based block device, nothing to abort
- */
- if (!q->request_fn)
- return;
-
- spin_lock_irqsave(q->queue_lock, flags);
-
- elv_abort_queue(q);
-
- /*
- * Splice entries to local list, to avoid deadlocking if entries
- * get readded to the timeout list by error handling
- */
- list_splice_init(&q->timeout_list, &list);
-
- list_for_each_entry_safe(rq, tmp, &list, timeout_list)
- blk_abort_request(rq);
-
- /*
- * Occasionally, blk_abort_request() will return without
- * deleting the element from the list. Make sure we add those back
- * instead of leaving them on the local stack list.
- */
- list_splice(&list, &q->timeout_list);
-
- spin_unlock_irqrestore(q->queue_lock, flags);
-
-}
-EXPORT_SYMBOL_GPL(blk_abort_queue);
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 673c977..fb52df97 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -17,8 +17,6 @@
#include "blk.h"
#include "blk-cgroup.h"
-static struct blkcg_policy blkcg_policy_cfq __maybe_unused;
-
/*
* tunables
*/
@@ -418,11 +416,6 @@
return pd ? container_of(pd, struct cfq_group, pd) : NULL;
}
-static inline struct cfq_group *blkg_to_cfqg(struct blkcg_gq *blkg)
-{
- return pd_to_cfqg(blkg_to_pd(blkg, &blkcg_policy_cfq));
-}
-
static inline struct blkcg_gq *cfqg_to_blkg(struct cfq_group *cfqg)
{
return pd_to_blkg(&cfqg->pd);
@@ -572,6 +565,13 @@
#ifdef CONFIG_CFQ_GROUP_IOSCHED
+static struct blkcg_policy blkcg_policy_cfq;
+
+static inline struct cfq_group *blkg_to_cfqg(struct blkcg_gq *blkg)
+{
+ return pd_to_cfqg(blkg_to_pd(blkg, &blkcg_policy_cfq));
+}
+
static inline void cfqg_get(struct cfq_group *cfqg)
{
return blkg_get(cfqg_to_blkg(cfqg));
@@ -3951,10 +3951,11 @@
cfq_shutdown_timer_wq(cfqd);
-#ifndef CONFIG_CFQ_GROUP_IOSCHED
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
+ blkcg_deactivate_policy(q, &blkcg_policy_cfq);
+#else
kfree(cfqd->root_group);
#endif
- blkcg_deactivate_policy(q, &blkcg_policy_cfq);
kfree(cfqd);
}
@@ -4194,14 +4195,15 @@
#ifdef CONFIG_CFQ_GROUP_IOSCHED
if (!cfq_group_idle)
cfq_group_idle = 1;
-#else
- cfq_group_idle = 0;
-#endif
ret = blkcg_policy_register(&blkcg_policy_cfq);
if (ret)
return ret;
+#else
+ cfq_group_idle = 0;
+#endif
+ ret = -ENOMEM;
cfq_pool = KMEM_CACHE(cfq_queue, 0);
if (!cfq_pool)
goto err_pol_unreg;
@@ -4215,13 +4217,17 @@
err_free_pool:
kmem_cache_destroy(cfq_pool);
err_pol_unreg:
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
blkcg_policy_unregister(&blkcg_policy_cfq);
+#endif
return ret;
}
static void __exit cfq_exit(void)
{
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
blkcg_policy_unregister(&blkcg_policy_cfq);
+#endif
elv_unregister(&iosched_cfq);
kmem_cache_destroy(cfq_pool);
}
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 260fa80..9a87daa 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -721,11 +721,14 @@
break;
}
+ if (capable(CAP_SYS_RAWIO))
+ return 0;
+
/* In particular, rule out all resets and host-specific ioctls. */
printk_ratelimited(KERN_WARNING
"%s: sending ioctl %x to a partition!\n", current->comm, cmd);
- return capable(CAP_SYS_RAWIO) ? 0 : -ENOIOCTLCMD;
+ return -ENOIOCTLCMD;
}
EXPORT_SYMBOL(scsi_verify_blk_ioctl);
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index 6512b20..ff9f6bd 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -61,7 +61,6 @@
static int acpi_ac_add(struct acpi_device *device);
static int acpi_ac_remove(struct acpi_device *device, int type);
-static int acpi_ac_resume(struct acpi_device *device);
static void acpi_ac_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id ac_device_ids[] = {
@@ -70,6 +69,9 @@
};
MODULE_DEVICE_TABLE(acpi, ac_device_ids);
+static int acpi_ac_resume(struct device *dev);
+static SIMPLE_DEV_PM_OPS(acpi_ac_pm, NULL, acpi_ac_resume);
+
static struct acpi_driver acpi_ac_driver = {
.name = "ac",
.class = ACPI_AC_CLASS,
@@ -78,9 +80,9 @@
.ops = {
.add = acpi_ac_add,
.remove = acpi_ac_remove,
- .resume = acpi_ac_resume,
.notify = acpi_ac_notify,
},
+ .drv.pm = &acpi_ac_pm,
};
struct acpi_ac {
@@ -309,13 +311,18 @@
return result;
}
-static int acpi_ac_resume(struct acpi_device *device)
+static int acpi_ac_resume(struct device *dev)
{
struct acpi_ac *ac;
unsigned old_state;
- if (!device || !acpi_driver_data(device))
+
+ if (!dev)
return -EINVAL;
- ac = acpi_driver_data(device);
+
+ ac = acpi_driver_data(to_acpi_device(dev));
+ if (!ac)
+ return -EINVAL;
+
old_state = ac->state;
if (acpi_ac_get_state(ac))
return 0;
diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
index a43fa1a..1502c502 100644
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -36,6 +36,7 @@
#define ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME "Processor Aggregator"
#define ACPI_PROCESSOR_AGGREGATOR_NOTIFY 0x80
static DEFINE_MUTEX(isolated_cpus_lock);
+static DEFINE_MUTEX(round_robin_lock);
static unsigned long power_saving_mwait_eax;
@@ -107,7 +108,7 @@
if (!alloc_cpumask_var(&tmp, GFP_KERNEL))
return;
- mutex_lock(&isolated_cpus_lock);
+ mutex_lock(&round_robin_lock);
cpumask_clear(tmp);
for_each_cpu(cpu, pad_busy_cpus)
cpumask_or(tmp, tmp, topology_thread_cpumask(cpu));
@@ -116,7 +117,7 @@
if (cpumask_empty(tmp))
cpumask_andnot(tmp, cpu_online_mask, pad_busy_cpus);
if (cpumask_empty(tmp)) {
- mutex_unlock(&isolated_cpus_lock);
+ mutex_unlock(&round_robin_lock);
return;
}
for_each_cpu(cpu, tmp) {
@@ -131,7 +132,7 @@
tsk_in_cpu[tsk_index] = preferred_cpu;
cpumask_set_cpu(preferred_cpu, pad_busy_cpus);
cpu_weight[preferred_cpu]++;
- mutex_unlock(&isolated_cpus_lock);
+ mutex_unlock(&round_robin_lock);
set_cpus_allowed_ptr(current, cpumask_of(preferred_cpu));
}
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index 0ed85ca..615996a 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -95,18 +95,6 @@
return_ACPI_STATUS(status);
}
- if (sleep_state != ACPI_STATE_S5) {
- /*
- * Disable BM arbitration. This feature is contained within an
- * optional register (PM2 Control), so ignore a BAD_ADDRESS
- * exception.
- */
- status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
- if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) {
- return_ACPI_STATUS(status);
- }
- }
-
/*
* 1) Disable/Clear all GPEs
* 2) Enable all wakeup GPEs
@@ -364,16 +352,6 @@
[ACPI_EVENT_POWER_BUTTON].
status_register_id, ACPI_CLEAR_STATUS);
- /*
- * Enable BM arbitration. This feature is contained within an
- * optional register (PM2 Control), so ignore a BAD_ADDRESS
- * exception.
- */
- status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
- if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) {
- return_ACPI_STATUS(status);
- }
-
acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING);
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c
index 23ce096..fe66260 100644
--- a/drivers/acpi/acpica/nspredef.c
+++ b/drivers/acpi/acpica/nspredef.c
@@ -638,7 +638,7 @@
/* Create the new outer package and populate it */
status =
- acpi_ns_wrap_with_package(data, *elements,
+ acpi_ns_wrap_with_package(data, return_object,
return_object_ptr);
if (ACPI_FAILURE(status)) {
return (status);
diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c
index 5577762..6686b1e 100644
--- a/drivers/acpi/apei/apei-base.c
+++ b/drivers/acpi/apei/apei-base.c
@@ -243,7 +243,7 @@
u8 ins = entry->instruction;
if (ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER)
- return acpi_os_map_generic_address(&entry->register_region);
+ return apei_map_generic_address(&entry->register_region);
return 0;
}
@@ -276,7 +276,7 @@
u8 ins = entry->instruction;
if (ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER)
- acpi_os_unmap_generic_address(&entry->register_region);
+ apei_unmap_generic_address(&entry->register_region);
return 0;
}
@@ -606,6 +606,19 @@
return 0;
}
+int apei_map_generic_address(struct acpi_generic_address *reg)
+{
+ int rc;
+ u32 access_bit_width;
+ u64 address;
+
+ rc = apei_check_gar(reg, &address, &access_bit_width);
+ if (rc)
+ return rc;
+ return acpi_os_map_generic_address(reg);
+}
+EXPORT_SYMBOL_GPL(apei_map_generic_address);
+
/* read GAR in interrupt (including NMI) or process context */
int apei_read(u64 *val, struct acpi_generic_address *reg)
{
diff --git a/drivers/acpi/apei/apei-internal.h b/drivers/acpi/apei/apei-internal.h
index cca240a..f220d64 100644
--- a/drivers/acpi/apei/apei-internal.h
+++ b/drivers/acpi/apei/apei-internal.h
@@ -7,6 +7,8 @@
#define APEI_INTERNAL_H
#include <linux/cper.h>
+#include <linux/acpi.h>
+#include <linux/acpi_io.h>
struct apei_exec_context;
@@ -68,6 +70,13 @@
/* IP has been set in instruction function */
#define APEI_EXEC_SET_IP 1
+int apei_map_generic_address(struct acpi_generic_address *reg);
+
+static inline void apei_unmap_generic_address(struct acpi_generic_address *reg)
+{
+ acpi_os_unmap_generic_address(reg);
+}
+
int apei_read(u64 *val, struct acpi_generic_address *reg);
int apei_write(u64 val, struct acpi_generic_address *reg);
diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index 9b3cac0..1599566 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -301,7 +301,7 @@
if (!ghes)
return ERR_PTR(-ENOMEM);
ghes->generic = generic;
- rc = acpi_os_map_generic_address(&generic->error_status_address);
+ rc = apei_map_generic_address(&generic->error_status_address);
if (rc)
goto err_free;
error_block_length = generic->error_block_length;
@@ -321,7 +321,7 @@
return ghes;
err_unmap:
- acpi_os_unmap_generic_address(&generic->error_status_address);
+ apei_unmap_generic_address(&generic->error_status_address);
err_free:
kfree(ghes);
return ERR_PTR(rc);
@@ -330,7 +330,7 @@
static void ghes_fini(struct ghes *ghes)
{
kfree(ghes->estatus);
- acpi_os_unmap_generic_address(&ghes->generic->error_status_address);
+ apei_unmap_generic_address(&ghes->generic->error_status_address);
}
enum {
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 7dd3f9f..023f9c8 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -1044,17 +1044,24 @@
}
/* this is needed to learn about changes made in suspended state */
-static int acpi_battery_resume(struct acpi_device *device)
+static int acpi_battery_resume(struct device *dev)
{
struct acpi_battery *battery;
- if (!device)
+
+ if (!dev)
return -EINVAL;
- battery = acpi_driver_data(device);
+
+ battery = acpi_driver_data(to_acpi_device(dev));
+ if (!battery)
+ return -EINVAL;
+
battery->update_time = 0;
acpi_battery_update(battery);
return 0;
}
+static SIMPLE_DEV_PM_OPS(acpi_battery_pm, NULL, acpi_battery_resume);
+
static struct acpi_driver acpi_battery_driver = {
.name = "battery",
.class = ACPI_BATTERY_CLASS,
@@ -1062,10 +1069,10 @@
.flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
.ops = {
.add = acpi_battery_add,
- .resume = acpi_battery_resume,
.remove = acpi_battery_remove,
.notify = acpi_battery_notify,
},
+ .drv.pm = &acpi_battery_pm,
};
static void __init acpi_battery_init_async(void *unused, async_cookie_t cookie)
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index d27d072..79d4c22 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -76,19 +76,21 @@
static int acpi_button_add(struct acpi_device *device);
static int acpi_button_remove(struct acpi_device *device, int type);
-static int acpi_button_resume(struct acpi_device *device);
static void acpi_button_notify(struct acpi_device *device, u32 event);
+static int acpi_button_resume(struct device *dev);
+static SIMPLE_DEV_PM_OPS(acpi_button_pm, NULL, acpi_button_resume);
+
static struct acpi_driver acpi_button_driver = {
.name = "button",
.class = ACPI_BUTTON_CLASS,
.ids = button_device_ids,
.ops = {
.add = acpi_button_add,
- .resume = acpi_button_resume,
.remove = acpi_button_remove,
.notify = acpi_button_notify,
},
+ .drv.pm = &acpi_button_pm,
};
struct acpi_button {
@@ -308,8 +310,9 @@
}
}
-static int acpi_button_resume(struct acpi_device *device)
+static int acpi_button_resume(struct device *dev)
{
+ struct acpi_device *device = to_acpi_device(dev);
struct acpi_button *button = acpi_driver_data(device);
if (button->type == ACPI_BUTTON_TYPE_LID)
diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index 0f0356c..669d9ee 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -46,8 +46,6 @@
static int acpi_fan_add(struct acpi_device *device);
static int acpi_fan_remove(struct acpi_device *device, int type);
-static int acpi_fan_suspend(struct acpi_device *device, pm_message_t state);
-static int acpi_fan_resume(struct acpi_device *device);
static const struct acpi_device_id fan_device_ids[] = {
{"PNP0C0B", 0},
@@ -55,6 +53,10 @@
};
MODULE_DEVICE_TABLE(acpi, fan_device_ids);
+static int acpi_fan_suspend(struct device *dev);
+static int acpi_fan_resume(struct device *dev);
+static SIMPLE_DEV_PM_OPS(acpi_fan_pm, acpi_fan_suspend, acpi_fan_resume);
+
static struct acpi_driver acpi_fan_driver = {
.name = "fan",
.class = ACPI_FAN_CLASS,
@@ -62,9 +64,8 @@
.ops = {
.add = acpi_fan_add,
.remove = acpi_fan_remove,
- .suspend = acpi_fan_suspend,
- .resume = acpi_fan_resume,
},
+ .drv.pm = &acpi_fan_pm,
};
/* thermal cooling device callbacks */
@@ -183,24 +184,24 @@
return 0;
}
-static int acpi_fan_suspend(struct acpi_device *device, pm_message_t state)
+static int acpi_fan_suspend(struct device *dev)
{
- if (!device)
+ if (!dev)
return -EINVAL;
- acpi_bus_set_power(device->handle, ACPI_STATE_D0);
+ acpi_bus_set_power(to_acpi_device(dev)->handle, ACPI_STATE_D0);
return AE_OK;
}
-static int acpi_fan_resume(struct acpi_device *device)
+static int acpi_fan_resume(struct device *dev)
{
int result;
- if (!device)
+ if (!dev)
return -EINVAL;
- result = acpi_bus_update_power(device->handle, NULL);
+ result = acpi_bus_update_power(to_acpi_device(dev)->handle, NULL);
if (result)
printk(KERN_ERR PREFIX "Error updating fan power state\n");
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index dd6d6a3..894d45c 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -60,7 +60,6 @@
static int acpi_power_add(struct acpi_device *device);
static int acpi_power_remove(struct acpi_device *device, int type);
-static int acpi_power_resume(struct acpi_device *device);
static const struct acpi_device_id power_device_ids[] = {
{ACPI_POWER_HID, 0},
@@ -68,6 +67,9 @@
};
MODULE_DEVICE_TABLE(acpi, power_device_ids);
+static int acpi_power_resume(struct device *dev);
+static SIMPLE_DEV_PM_OPS(acpi_power_pm, NULL, acpi_power_resume);
+
static struct acpi_driver acpi_power_driver = {
.name = "power",
.class = ACPI_POWER_CLASS,
@@ -75,8 +77,8 @@
.ops = {
.add = acpi_power_add,
.remove = acpi_power_remove,
- .resume = acpi_power_resume,
},
+ .drv.pm = &acpi_power_pm,
};
/*
@@ -771,14 +773,16 @@
return 0;
}
-static int acpi_power_resume(struct acpi_device *device)
+static int acpi_power_resume(struct device *dev)
{
int result = 0, state;
+ struct acpi_device *device;
struct acpi_power_resource *resource;
- if (!device)
+ if (!dev)
return -EINVAL;
+ device = to_acpi_device(dev);
resource = acpi_driver_data(device);
if (!resource)
return -EINVAL;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index c850de4..eff7222 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -189,10 +189,12 @@
* Processor (CPU3, 0x03, 0x00000410, 0x06) {}
* }
*
- * Ignores apic_id and always return 0 for CPU0's handle.
+ * Ignores apic_id and always returns 0 for the processor
+ * handle with acpi id 0 if nr_cpu_ids is 1.
+ * This should be the case if SMP tables are not found.
* Return -1 for other CPU's handle.
*/
- if (acpi_id == 0)
+ if (nr_cpu_ids <= 1 && acpi_id == 0)
return acpi_id;
else
return apic_id;
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index 0734086..7048b97 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -93,6 +93,9 @@
};
MODULE_DEVICE_TABLE(acpi, processor_device_ids);
+static SIMPLE_DEV_PM_OPS(acpi_processor_pm,
+ acpi_processor_suspend, acpi_processor_resume);
+
static struct acpi_driver acpi_processor_driver = {
.name = "processor",
.class = ACPI_PROCESSOR_CLASS,
@@ -100,10 +103,9 @@
.ops = {
.add = acpi_processor_add,
.remove = acpi_processor_remove,
- .suspend = acpi_processor_suspend,
- .resume = acpi_processor_resume,
.notify = acpi_processor_notify,
},
+ .drv.pm = &acpi_processor_pm,
};
#define INSTALL_NOTIFY_HANDLER 1
@@ -427,18 +429,11 @@
* Initialize missing things
*/
if (pr->flags.need_hotplug_init) {
- struct cpuidle_driver *idle_driver =
- cpuidle_get_driver();
-
printk(KERN_INFO "Will online and init hotplugged "
"CPU: %d\n", pr->id);
WARN(acpi_processor_start(pr), "Failed to start CPU:"
" %d\n", pr->id);
pr->flags.need_hotplug_init = 0;
- if (idle_driver && !strcmp(idle_driver->name,
- "intel_idle")) {
- intel_idle_cpu_init(pr->id);
- }
/* Normal CPU soft online event */
} else {
acpi_processor_ppc_has_changed(pr, 0);
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index f3decb3..e589c19 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -221,9 +221,6 @@
#endif
-/*
- * Suspend / resume control
- */
static u32 saved_bm_rld;
static void acpi_idle_bm_rld_save(void)
@@ -240,13 +237,13 @@
acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld);
}
-int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
+int acpi_processor_suspend(struct device *dev)
{
acpi_idle_bm_rld_save();
return 0;
}
-int acpi_processor_resume(struct acpi_device * device)
+int acpi_processor_resume(struct device *dev)
{
acpi_idle_bm_rld_restore();
return 0;
@@ -586,7 +583,6 @@
*/
cx->valid = 1;
- cx->latency_ticks = cx->latency;
/*
* On older chipsets, BM_RLD needs to be set
* in order for Bus Master activity to wake the
@@ -619,7 +615,6 @@
if (!cx->address)
break;
cx->valid = 1;
- cx->latency_ticks = cx->latency; /* Normalize latency */
break;
case ACPI_STATE_C3:
@@ -754,6 +749,7 @@
local_irq_disable();
+
lapic_timer_state_broadcast(pr, cx, 1);
kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
@@ -764,7 +760,6 @@
dev->last_residency = (int)idle_time;
local_irq_enable();
- cx->usage++;
lapic_timer_state_broadcast(pr, cx, 0);
return index;
@@ -823,6 +818,7 @@
local_irq_disable();
+
if (cx->entry_method != ACPI_CSTATE_FFH) {
current_thread_info()->status &= ~TS_POLLING;
/*
@@ -866,10 +862,7 @@
if (cx->entry_method != ACPI_CSTATE_FFH)
current_thread_info()->status |= TS_POLLING;
- cx->usage++;
-
lapic_timer_state_broadcast(pr, cx, 0);
- cx->time += idle_time;
return index;
}
@@ -909,12 +902,13 @@
local_irq_disable();
acpi_safe_halt();
local_irq_enable();
- return -EINVAL;
+ return -EBUSY;
}
}
local_irq_disable();
+
if (cx->entry_method != ACPI_CSTATE_FFH) {
current_thread_info()->status &= ~TS_POLLING;
/*
@@ -986,10 +980,7 @@
if (cx->entry_method != ACPI_CSTATE_FFH)
current_thread_info()->status |= TS_POLLING;
- cx->usage++;
-
lapic_timer_state_broadcast(pr, cx, 0);
- cx->time += idle_time;
return index;
}
diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c
index 6e36d0c..c0b9aa5 100644
--- a/drivers/acpi/sbs.c
+++ b/drivers/acpi/sbs.c
@@ -988,16 +988,18 @@
#endif
}
-static int acpi_sbs_resume(struct acpi_device *device)
+static int acpi_sbs_resume(struct device *dev)
{
struct acpi_sbs *sbs;
- if (!device)
+ if (!dev)
return -EINVAL;
- sbs = device->driver_data;
+ sbs = to_acpi_device(dev)->driver_data;
acpi_sbs_callback(sbs);
return 0;
}
+static SIMPLE_DEV_PM_OPS(acpi_sbs_pm, NULL, acpi_sbs_resume);
+
static struct acpi_driver acpi_sbs_driver = {
.name = "sbs",
.class = ACPI_SBS_CLASS,
@@ -1005,8 +1007,8 @@
.ops = {
.add = acpi_sbs_add,
.remove = acpi_sbs_remove,
- .resume = acpi_sbs_resume,
},
+ .drv.pm = &acpi_sbs_pm,
};
static int __init acpi_sbs_init(void)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index c8a1f3b..fdda493 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -290,26 +290,6 @@
kfree(acpi_dev);
}
-static int acpi_device_suspend(struct device *dev, pm_message_t state)
-{
- struct acpi_device *acpi_dev = to_acpi_device(dev);
- struct acpi_driver *acpi_drv = acpi_dev->driver;
-
- if (acpi_drv && acpi_drv->ops.suspend)
- return acpi_drv->ops.suspend(acpi_dev, state);
- return 0;
-}
-
-static int acpi_device_resume(struct device *dev)
-{
- struct acpi_device *acpi_dev = to_acpi_device(dev);
- struct acpi_driver *acpi_drv = acpi_dev->driver;
-
- if (acpi_drv && acpi_drv->ops.resume)
- return acpi_drv->ops.resume(acpi_dev);
- return 0;
-}
-
static int acpi_bus_match(struct device *dev, struct device_driver *drv)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
@@ -441,8 +421,6 @@
struct bus_type acpi_bus_type = {
.name = "acpi",
- .suspend = acpi_device_suspend,
- .resume = acpi_device_resume,
.match = acpi_bus_match,
.probe = acpi_device_probe,
.remove = acpi_device_remove,
diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
index 9f66181..240a244 100644
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -173,7 +173,7 @@
{
int result = 0;
- if (!strncmp(val, "enable", strlen("enable") - 1)) {
+ if (!strncmp(val, "enable", strlen("enable"))) {
result = acpi_debug_trace(trace_method_name, trace_debug_level,
trace_debug_layer, 0);
if (result)
@@ -181,7 +181,7 @@
goto exit;
}
- if (!strncmp(val, "disable", strlen("disable") - 1)) {
+ if (!strncmp(val, "disable", strlen("disable"))) {
int name = 0;
result = acpi_debug_trace((char *)&name, trace_debug_level,
trace_debug_layer, 0);
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 7dbebea..21dd4c2 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -98,7 +98,6 @@
static int acpi_thermal_add(struct acpi_device *device);
static int acpi_thermal_remove(struct acpi_device *device, int type);
-static int acpi_thermal_resume(struct acpi_device *device);
static void acpi_thermal_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id thermal_device_ids[] = {
@@ -107,6 +106,9 @@
};
MODULE_DEVICE_TABLE(acpi, thermal_device_ids);
+static int acpi_thermal_resume(struct device *dev);
+static SIMPLE_DEV_PM_OPS(acpi_thermal_pm, NULL, acpi_thermal_resume);
+
static struct acpi_driver acpi_thermal_driver = {
.name = "thermal",
.class = ACPI_THERMAL_CLASS,
@@ -114,9 +116,9 @@
.ops = {
.add = acpi_thermal_add,
.remove = acpi_thermal_remove,
- .resume = acpi_thermal_resume,
.notify = acpi_thermal_notify,
},
+ .drv.pm = &acpi_thermal_pm,
};
struct acpi_thermal_state {
@@ -1041,16 +1043,17 @@
return 0;
}
-static int acpi_thermal_resume(struct acpi_device *device)
+static int acpi_thermal_resume(struct device *dev)
{
- struct acpi_thermal *tz = NULL;
+ struct acpi_thermal *tz;
int i, j, power_state, result;
-
- if (!device || !acpi_driver_data(device))
+ if (!dev)
return -EINVAL;
- tz = acpi_driver_data(device);
+ tz = acpi_driver_data(to_acpi_device(dev));
+ if (!tz)
+ return -EINVAL;
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
if (!(&tz->trips.active[i]))
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index a576575..1e0a9e1 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -558,6 +558,8 @@
union acpi_object arg0 = { ACPI_TYPE_INTEGER };
struct acpi_object_list args = { 1, &arg0 };
+ if (!video->cap._DOS)
+ return 0;
if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1)
return -EINVAL;
diff --git a/drivers/amba/tegra-ahb.c b/drivers/amba/tegra-ahb.c
index aa0b1f1..0b6f0b2 100644
--- a/drivers/amba/tegra-ahb.c
+++ b/drivers/amba/tegra-ahb.c
@@ -264,11 +264,6 @@
return 0;
}
-static int __devexit tegra_ahb_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
static const struct of_device_id tegra_ahb_of_match[] __devinitconst = {
{ .compatible = "nvidia,tegra30-ahb", },
{ .compatible = "nvidia,tegra20-ahb", },
@@ -277,7 +272,6 @@
static struct platform_driver tegra_ahb_driver = {
.probe = tegra_ahb_probe,
- .remove = __devexit_p(tegra_ahb_remove),
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 3239517..ac6a5be 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -4,7 +4,7 @@
* Arasan Compact Flash host controller source file
*
* Copyright (C) 2011 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
@@ -959,7 +959,7 @@
module_platform_driver(arasan_cf_driver);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("Arasan ATA Compact Flash driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 1b1cbb5..4b01ab3 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -24,6 +24,7 @@
#include <linux/wait.h>
#include <linux/async.h>
#include <linux/pm_runtime.h>
+#include <scsi/scsi_scan.h>
#include "base.h"
#include "power/power.h"
@@ -100,7 +101,7 @@
mutex_lock(&deferred_probe_mutex);
if (list_empty(&dev->p->deferred_probe)) {
dev_dbg(dev, "Added to deferred list\n");
- list_add(&dev->p->deferred_probe, &deferred_probe_pending_list);
+ list_add_tail(&dev->p->deferred_probe, &deferred_probe_pending_list);
}
mutex_unlock(&deferred_probe_mutex);
}
@@ -332,6 +333,7 @@
/* wait for the known devices to complete their probing */
wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
async_synchronize_full();
+ scsi_complete_async_scans();
}
EXPORT_SYMBOL_GPL(wait_for_device_probe);
diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c
index 765c3a2..d91a3a0 100644
--- a/drivers/base/devtmpfs.c
+++ b/drivers/base/devtmpfs.c
@@ -227,33 +227,24 @@
static int dev_rmdir(const char *name)
{
- struct nameidata nd;
+ struct path parent;
struct dentry *dentry;
int err;
- err = kern_path_parent(name, &nd);
- if (err)
- return err;
-
- mutex_lock_nested(&nd.path.dentry->d_inode->i_mutex, I_MUTEX_PARENT);
- dentry = lookup_one_len(nd.last.name, nd.path.dentry, nd.last.len);
- if (!IS_ERR(dentry)) {
- if (dentry->d_inode) {
- if (dentry->d_inode->i_private == &thread)
- err = vfs_rmdir(nd.path.dentry->d_inode,
- dentry);
- else
- err = -EPERM;
- } else {
- err = -ENOENT;
- }
- dput(dentry);
+ dentry = kern_path_locked(name, &parent);
+ if (IS_ERR(dentry))
+ return PTR_ERR(dentry);
+ if (dentry->d_inode) {
+ if (dentry->d_inode->i_private == &thread)
+ err = vfs_rmdir(parent.dentry->d_inode, dentry);
+ else
+ err = -EPERM;
} else {
- err = PTR_ERR(dentry);
+ err = -ENOENT;
}
-
- mutex_unlock(&nd.path.dentry->d_inode->i_mutex);
- path_put(&nd.path);
+ dput(dentry);
+ mutex_unlock(&parent.dentry->d_inode->i_mutex);
+ path_put(&parent);
return err;
}
@@ -305,50 +296,43 @@
static int handle_remove(const char *nodename, struct device *dev)
{
- struct nameidata nd;
+ struct path parent;
struct dentry *dentry;
- struct kstat stat;
int deleted = 1;
int err;
- err = kern_path_parent(nodename, &nd);
- if (err)
- return err;
+ dentry = kern_path_locked(nodename, &parent);
+ if (IS_ERR(dentry))
+ return PTR_ERR(dentry);
- mutex_lock_nested(&nd.path.dentry->d_inode->i_mutex, I_MUTEX_PARENT);
- dentry = lookup_one_len(nd.last.name, nd.path.dentry, nd.last.len);
- if (!IS_ERR(dentry)) {
- if (dentry->d_inode) {
- err = vfs_getattr(nd.path.mnt, dentry, &stat);
- if (!err && dev_mynode(dev, dentry->d_inode, &stat)) {
- struct iattr newattrs;
- /*
- * before unlinking this node, reset permissions
- * of possible references like hardlinks
- */
- newattrs.ia_uid = 0;
- newattrs.ia_gid = 0;
- newattrs.ia_mode = stat.mode & ~0777;
- newattrs.ia_valid =
- ATTR_UID|ATTR_GID|ATTR_MODE;
- mutex_lock(&dentry->d_inode->i_mutex);
- notify_change(dentry, &newattrs);
- mutex_unlock(&dentry->d_inode->i_mutex);
- err = vfs_unlink(nd.path.dentry->d_inode,
- dentry);
- if (!err || err == -ENOENT)
- deleted = 1;
- }
- } else {
- err = -ENOENT;
+ if (dentry->d_inode) {
+ struct kstat stat;
+ err = vfs_getattr(parent.mnt, dentry, &stat);
+ if (!err && dev_mynode(dev, dentry->d_inode, &stat)) {
+ struct iattr newattrs;
+ /*
+ * before unlinking this node, reset permissions
+ * of possible references like hardlinks
+ */
+ newattrs.ia_uid = 0;
+ newattrs.ia_gid = 0;
+ newattrs.ia_mode = stat.mode & ~0777;
+ newattrs.ia_valid =
+ ATTR_UID|ATTR_GID|ATTR_MODE;
+ mutex_lock(&dentry->d_inode->i_mutex);
+ notify_change(dentry, &newattrs);
+ mutex_unlock(&dentry->d_inode->i_mutex);
+ err = vfs_unlink(parent.dentry->d_inode, dentry);
+ if (!err || err == -ENOENT)
+ deleted = 1;
}
- dput(dentry);
} else {
- err = PTR_ERR(dentry);
+ err = -ENOENT;
}
- mutex_unlock(&nd.path.dentry->d_inode->i_mutex);
+ dput(dentry);
+ mutex_unlock(&parent.dentry->d_inode->i_mutex);
- path_put(&nd.path);
+ path_put(&parent);
if (deleted && strchr(nodename, '/'))
delete_path(nodename);
return err;
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 83aa694..ba3487c 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -75,19 +75,6 @@
start_latency_ns, "start");
}
-static int genpd_save_dev(struct generic_pm_domain *genpd, struct device *dev)
-{
- return GENPD_DEV_TIMED_CALLBACK(genpd, int, save_state, dev,
- save_state_latency_ns, "state save");
-}
-
-static int genpd_restore_dev(struct generic_pm_domain *genpd, struct device *dev)
-{
- return GENPD_DEV_TIMED_CALLBACK(genpd, int, restore_state, dev,
- restore_state_latency_ns,
- "state restore");
-}
-
static bool genpd_sd_counter_dec(struct generic_pm_domain *genpd)
{
bool ret = false;
@@ -139,6 +126,19 @@
genpd->status = GPD_STATE_ACTIVE;
}
+static void genpd_recalc_cpu_exit_latency(struct generic_pm_domain *genpd)
+{
+ s64 usecs64;
+
+ if (!genpd->cpu_data)
+ return;
+
+ usecs64 = genpd->power_on_latency_ns;
+ do_div(usecs64, NSEC_PER_USEC);
+ usecs64 += genpd->cpu_data->saved_exit_latency;
+ genpd->cpu_data->idle_state->exit_latency = usecs64;
+}
+
/**
* __pm_genpd_poweron - Restore power to a given PM domain and its masters.
* @genpd: PM domain to power up.
@@ -146,7 +146,7 @@
* Restore power to @genpd and all of its masters so that it is possible to
* resume a device belonging to it.
*/
-int __pm_genpd_poweron(struct generic_pm_domain *genpd)
+static int __pm_genpd_poweron(struct generic_pm_domain *genpd)
__releases(&genpd->lock) __acquires(&genpd->lock)
{
struct gpd_link *link;
@@ -176,6 +176,13 @@
return 0;
}
+ if (genpd->cpu_data) {
+ cpuidle_pause_and_lock();
+ genpd->cpu_data->idle_state->disabled = true;
+ cpuidle_resume_and_unlock();
+ goto out;
+ }
+
/*
* The list is guaranteed not to change while the loop below is being
* executed, unless one of the masters' .power_on() callbacks fiddles
@@ -215,6 +222,7 @@
if (elapsed_ns > genpd->power_on_latency_ns) {
genpd->power_on_latency_ns = elapsed_ns;
genpd->max_off_time_changed = true;
+ genpd_recalc_cpu_exit_latency(genpd);
if (genpd->name)
pr_warning("%s: Power-on latency exceeded, "
"new value %lld ns\n", genpd->name,
@@ -222,6 +230,7 @@
}
}
+ out:
genpd_set_active(genpd);
return 0;
@@ -251,6 +260,19 @@
#ifdef CONFIG_PM_RUNTIME
+static int genpd_save_dev(struct generic_pm_domain *genpd, struct device *dev)
+{
+ return GENPD_DEV_TIMED_CALLBACK(genpd, int, save_state, dev,
+ save_state_latency_ns, "state save");
+}
+
+static int genpd_restore_dev(struct generic_pm_domain *genpd, struct device *dev)
+{
+ return GENPD_DEV_TIMED_CALLBACK(genpd, int, restore_state, dev,
+ restore_state_latency_ns,
+ "state restore");
+}
+
static int genpd_dev_pm_qos_notifier(struct notifier_block *nb,
unsigned long val, void *ptr)
{
@@ -275,7 +297,7 @@
pdd = dev->power.subsys_data ?
dev->power.subsys_data->domain_data : NULL;
- if (pdd) {
+ if (pdd && pdd->dev) {
to_gpd_data(pdd)->td.constraint_changed = true;
genpd = dev_to_genpd(dev);
} else {
@@ -339,19 +361,16 @@
{
struct generic_pm_domain_data *gpd_data = to_gpd_data(pdd);
struct device *dev = pdd->dev;
+ bool need_restore = gpd_data->need_restore;
- if (!gpd_data->need_restore)
- return;
-
+ gpd_data->need_restore = false;
mutex_unlock(&genpd->lock);
genpd_start_dev(genpd, dev);
- genpd_restore_dev(genpd, dev);
- genpd_stop_dev(genpd, dev);
+ if (need_restore)
+ genpd_restore_dev(genpd, dev);
mutex_lock(&genpd->lock);
-
- gpd_data->need_restore = false;
}
/**
@@ -458,6 +477,21 @@
}
}
+ if (genpd->cpu_data) {
+ /*
+ * If cpu_data is set, cpuidle should turn the domain off when
+ * the CPU in it is idle. In that case we don't decrement the
+ * subdomain counts of the master domains, so that power is not
+ * removed from the current domain prematurely as a result of
+ * cutting off the masters' power.
+ */
+ genpd->status = GPD_STATE_POWER_OFF;
+ cpuidle_pause_and_lock();
+ genpd->cpu_data->idle_state->disabled = false;
+ cpuidle_resume_and_unlock();
+ goto out;
+ }
+
if (genpd->power_off) {
ktime_t time_start;
s64 elapsed_ns;
@@ -595,7 +629,7 @@
/* If power.irq_safe, the PM domain is never powered off. */
if (dev->power.irq_safe)
- goto out;
+ return genpd_start_dev(genpd, dev);
mutex_lock(&genpd->lock);
ret = __pm_genpd_poweron(genpd);
@@ -628,9 +662,6 @@
wake_up_all(&genpd->status_wait_queue);
mutex_unlock(&genpd->lock);
- out:
- genpd_start_dev(genpd, dev);
-
return 0;
}
@@ -1235,6 +1266,27 @@
#endif /* CONFIG_PM_SLEEP */
+static struct generic_pm_domain_data *__pm_genpd_alloc_dev_data(struct device *dev)
+{
+ struct generic_pm_domain_data *gpd_data;
+
+ gpd_data = kzalloc(sizeof(*gpd_data), GFP_KERNEL);
+ if (!gpd_data)
+ return NULL;
+
+ mutex_init(&gpd_data->lock);
+ gpd_data->nb.notifier_call = genpd_dev_pm_qos_notifier;
+ dev_pm_qos_add_notifier(dev, &gpd_data->nb);
+ return gpd_data;
+}
+
+static void __pm_genpd_free_dev_data(struct device *dev,
+ struct generic_pm_domain_data *gpd_data)
+{
+ dev_pm_qos_remove_notifier(dev, &gpd_data->nb);
+ kfree(gpd_data);
+}
+
/**
* __pm_genpd_add_device - Add a device to an I/O PM domain.
* @genpd: PM domain to add the device to.
@@ -1244,7 +1296,7 @@
int __pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev,
struct gpd_timing_data *td)
{
- struct generic_pm_domain_data *gpd_data;
+ struct generic_pm_domain_data *gpd_data_new, *gpd_data = NULL;
struct pm_domain_data *pdd;
int ret = 0;
@@ -1253,14 +1305,10 @@
if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(dev))
return -EINVAL;
- gpd_data = kzalloc(sizeof(*gpd_data), GFP_KERNEL);
- if (!gpd_data)
+ gpd_data_new = __pm_genpd_alloc_dev_data(dev);
+ if (!gpd_data_new)
return -ENOMEM;
- mutex_init(&gpd_data->lock);
- gpd_data->nb.notifier_call = genpd_dev_pm_qos_notifier;
- dev_pm_qos_add_notifier(dev, &gpd_data->nb);
-
genpd_acquire_lock(genpd);
if (genpd->prepared_count > 0) {
@@ -1274,35 +1322,42 @@
goto out;
}
+ ret = dev_pm_get_subsys_data(dev);
+ if (ret)
+ goto out;
+
genpd->device_count++;
genpd->max_off_time_changed = true;
- dev_pm_get_subsys_data(dev);
-
- mutex_lock(&gpd_data->lock);
spin_lock_irq(&dev->power.lock);
+
dev->pm_domain = &genpd->domain;
- dev->power.subsys_data->domain_data = &gpd_data->base;
- gpd_data->base.dev = dev;
- list_add_tail(&gpd_data->base.list_node, &genpd->dev_list);
- gpd_data->need_restore = genpd->status == GPD_STATE_POWER_OFF;
+ if (dev->power.subsys_data->domain_data) {
+ gpd_data = to_gpd_data(dev->power.subsys_data->domain_data);
+ } else {
+ gpd_data = gpd_data_new;
+ dev->power.subsys_data->domain_data = &gpd_data->base;
+ }
+ gpd_data->refcount++;
if (td)
gpd_data->td = *td;
+ spin_unlock_irq(&dev->power.lock);
+
+ mutex_lock(&gpd_data->lock);
+ gpd_data->base.dev = dev;
+ list_add_tail(&gpd_data->base.list_node, &genpd->dev_list);
+ gpd_data->need_restore = genpd->status == GPD_STATE_POWER_OFF;
gpd_data->td.constraint_changed = true;
gpd_data->td.effective_constraint_ns = -1;
- spin_unlock_irq(&dev->power.lock);
mutex_unlock(&gpd_data->lock);
- genpd_release_lock(genpd);
-
- return 0;
-
out:
genpd_release_lock(genpd);
- dev_pm_qos_remove_notifier(dev, &gpd_data->nb);
- kfree(gpd_data);
+ if (gpd_data != gpd_data_new)
+ __pm_genpd_free_dev_data(dev, gpd_data_new);
+
return ret;
}
@@ -1348,6 +1403,7 @@
{
struct generic_pm_domain_data *gpd_data;
struct pm_domain_data *pdd;
+ bool remove = false;
int ret = 0;
dev_dbg(dev, "%s()\n", __func__);
@@ -1368,22 +1424,28 @@
genpd->max_off_time_changed = true;
spin_lock_irq(&dev->power.lock);
+
dev->pm_domain = NULL;
pdd = dev->power.subsys_data->domain_data;
list_del_init(&pdd->list_node);
- dev->power.subsys_data->domain_data = NULL;
+ gpd_data = to_gpd_data(pdd);
+ if (--gpd_data->refcount == 0) {
+ dev->power.subsys_data->domain_data = NULL;
+ remove = true;
+ }
+
spin_unlock_irq(&dev->power.lock);
- gpd_data = to_gpd_data(pdd);
mutex_lock(&gpd_data->lock);
pdd->dev = NULL;
mutex_unlock(&gpd_data->lock);
genpd_release_lock(genpd);
- dev_pm_qos_remove_notifier(dev, &gpd_data->nb);
- kfree(gpd_data);
dev_pm_put_subsys_data(dev);
+ if (remove)
+ __pm_genpd_free_dev_data(dev, gpd_data);
+
return 0;
out:
@@ -1541,33 +1603,52 @@
* @dev: Device to add the callbacks to.
* @ops: Set of callbacks to add.
* @td: Timing data to add to the device along with the callbacks (optional).
+ *
+ * Every call to this routine should be balanced with a call to
+ * __pm_genpd_remove_callbacks() and they must not be nested.
*/
int pm_genpd_add_callbacks(struct device *dev, struct gpd_dev_ops *ops,
struct gpd_timing_data *td)
{
- struct pm_domain_data *pdd;
+ struct generic_pm_domain_data *gpd_data_new, *gpd_data = NULL;
int ret = 0;
- if (!(dev && dev->power.subsys_data && ops))
+ if (!(dev && ops))
return -EINVAL;
+ gpd_data_new = __pm_genpd_alloc_dev_data(dev);
+ if (!gpd_data_new)
+ return -ENOMEM;
+
pm_runtime_disable(dev);
device_pm_lock();
- pdd = dev->power.subsys_data->domain_data;
- if (pdd) {
- struct generic_pm_domain_data *gpd_data = to_gpd_data(pdd);
+ ret = dev_pm_get_subsys_data(dev);
+ if (ret)
+ goto out;
- gpd_data->ops = *ops;
- if (td)
- gpd_data->td = *td;
+ spin_lock_irq(&dev->power.lock);
+
+ if (dev->power.subsys_data->domain_data) {
+ gpd_data = to_gpd_data(dev->power.subsys_data->domain_data);
} else {
- ret = -EINVAL;
+ gpd_data = gpd_data_new;
+ dev->power.subsys_data->domain_data = &gpd_data->base;
}
+ gpd_data->refcount++;
+ gpd_data->ops = *ops;
+ if (td)
+ gpd_data->td = *td;
+ spin_unlock_irq(&dev->power.lock);
+
+ out:
device_pm_unlock();
pm_runtime_enable(dev);
+ if (gpd_data != gpd_data_new)
+ __pm_genpd_free_dev_data(dev, gpd_data_new);
+
return ret;
}
EXPORT_SYMBOL_GPL(pm_genpd_add_callbacks);
@@ -1576,10 +1657,13 @@
* __pm_genpd_remove_callbacks - Remove PM domain callbacks from a given device.
* @dev: Device to remove the callbacks from.
* @clear_td: If set, clear the device's timing data too.
+ *
+ * This routine can only be called after pm_genpd_add_callbacks().
*/
int __pm_genpd_remove_callbacks(struct device *dev, bool clear_td)
{
- struct pm_domain_data *pdd;
+ struct generic_pm_domain_data *gpd_data = NULL;
+ bool remove = false;
int ret = 0;
if (!(dev && dev->power.subsys_data))
@@ -1588,24 +1672,118 @@
pm_runtime_disable(dev);
device_pm_lock();
- pdd = dev->power.subsys_data->domain_data;
- if (pdd) {
- struct generic_pm_domain_data *gpd_data = to_gpd_data(pdd);
+ spin_lock_irq(&dev->power.lock);
- gpd_data->ops = (struct gpd_dev_ops){ 0 };
+ if (dev->power.subsys_data->domain_data) {
+ gpd_data = to_gpd_data(dev->power.subsys_data->domain_data);
+ gpd_data->ops = (struct gpd_dev_ops){ NULL };
if (clear_td)
gpd_data->td = (struct gpd_timing_data){ 0 };
+
+ if (--gpd_data->refcount == 0) {
+ dev->power.subsys_data->domain_data = NULL;
+ remove = true;
+ }
} else {
ret = -EINVAL;
}
+ spin_unlock_irq(&dev->power.lock);
+
device_pm_unlock();
pm_runtime_enable(dev);
- return ret;
+ if (ret)
+ return ret;
+
+ dev_pm_put_subsys_data(dev);
+ if (remove)
+ __pm_genpd_free_dev_data(dev, gpd_data);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(__pm_genpd_remove_callbacks);
+int genpd_attach_cpuidle(struct generic_pm_domain *genpd, int state)
+{
+ struct cpuidle_driver *cpuidle_drv;
+ struct gpd_cpu_data *cpu_data;
+ struct cpuidle_state *idle_state;
+ int ret = 0;
+
+ if (IS_ERR_OR_NULL(genpd) || state < 0)
+ return -EINVAL;
+
+ genpd_acquire_lock(genpd);
+
+ if (genpd->cpu_data) {
+ ret = -EEXIST;
+ goto out;
+ }
+ cpu_data = kzalloc(sizeof(*cpu_data), GFP_KERNEL);
+ if (!cpu_data) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ cpuidle_drv = cpuidle_driver_ref();
+ if (!cpuidle_drv) {
+ ret = -ENODEV;
+ goto out;
+ }
+ if (cpuidle_drv->state_count <= state) {
+ ret = -EINVAL;
+ goto err;
+ }
+ idle_state = &cpuidle_drv->states[state];
+ if (!idle_state->disabled) {
+ ret = -EAGAIN;
+ goto err;
+ }
+ cpu_data->idle_state = idle_state;
+ cpu_data->saved_exit_latency = idle_state->exit_latency;
+ genpd->cpu_data = cpu_data;
+ genpd_recalc_cpu_exit_latency(genpd);
+
+ out:
+ genpd_release_lock(genpd);
+ return ret;
+
+ err:
+ cpuidle_driver_unref();
+ goto out;
+}
+
+int genpd_detach_cpuidle(struct generic_pm_domain *genpd)
+{
+ struct gpd_cpu_data *cpu_data;
+ struct cpuidle_state *idle_state;
+ int ret = 0;
+
+ if (IS_ERR_OR_NULL(genpd))
+ return -EINVAL;
+
+ genpd_acquire_lock(genpd);
+
+ cpu_data = genpd->cpu_data;
+ if (!cpu_data) {
+ ret = -ENODEV;
+ goto out;
+ }
+ idle_state = cpu_data->idle_state;
+ if (!idle_state->disabled) {
+ ret = -EAGAIN;
+ goto out;
+ }
+ idle_state->exit_latency = cpu_data->saved_exit_latency;
+ cpuidle_driver_unref();
+ genpd->cpu_data = NULL;
+ kfree(cpu_data);
+
+ out:
+ genpd_release_lock(genpd);
+ return ret;
+}
+
/* Default device callbacks for generic PM domains. */
/**
@@ -1615,16 +1793,24 @@
static int pm_genpd_default_save_state(struct device *dev)
{
int (*cb)(struct device *__dev);
- struct device_driver *drv = dev->driver;
cb = dev_gpd_data(dev)->ops.save_state;
if (cb)
return cb(dev);
- if (drv && drv->pm && drv->pm->runtime_suspend)
- return drv->pm->runtime_suspend(dev);
+ if (dev->type && dev->type->pm)
+ cb = dev->type->pm->runtime_suspend;
+ else if (dev->class && dev->class->pm)
+ cb = dev->class->pm->runtime_suspend;
+ else if (dev->bus && dev->bus->pm)
+ cb = dev->bus->pm->runtime_suspend;
+ else
+ cb = NULL;
- return 0;
+ if (!cb && dev->driver && dev->driver->pm)
+ cb = dev->driver->pm->runtime_suspend;
+
+ return cb ? cb(dev) : 0;
}
/**
@@ -1634,16 +1820,24 @@
static int pm_genpd_default_restore_state(struct device *dev)
{
int (*cb)(struct device *__dev);
- struct device_driver *drv = dev->driver;
cb = dev_gpd_data(dev)->ops.restore_state;
if (cb)
return cb(dev);
- if (drv && drv->pm && drv->pm->runtime_resume)
- return drv->pm->runtime_resume(dev);
+ if (dev->type && dev->type->pm)
+ cb = dev->type->pm->runtime_resume;
+ else if (dev->class && dev->class->pm)
+ cb = dev->class->pm->runtime_resume;
+ else if (dev->bus && dev->bus->pm)
+ cb = dev->bus->pm->runtime_resume;
+ else
+ cb = NULL;
- return 0;
+ if (!cb && dev->driver && dev->driver->pm)
+ cb = dev->driver->pm->runtime_resume;
+
+ return cb ? cb(dev) : 0;
}
#ifdef CONFIG_PM_SLEEP
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index e0fb5b0..0113adc 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -28,7 +28,7 @@
#include <linux/sched.h>
#include <linux/async.h>
#include <linux/suspend.h>
-
+#include <linux/cpuidle.h>
#include "../base.h"
#include "power.h"
@@ -45,10 +45,10 @@
*/
LIST_HEAD(dpm_list);
-LIST_HEAD(dpm_prepared_list);
-LIST_HEAD(dpm_suspended_list);
-LIST_HEAD(dpm_late_early_list);
-LIST_HEAD(dpm_noirq_list);
+static LIST_HEAD(dpm_prepared_list);
+static LIST_HEAD(dpm_suspended_list);
+static LIST_HEAD(dpm_late_early_list);
+static LIST_HEAD(dpm_noirq_list);
struct suspend_stats suspend_stats;
static DEFINE_MUTEX(dpm_list_mtx);
@@ -166,7 +166,7 @@
{
ktime_t calltime = ktime_set(0, 0);
- if (initcall_debug) {
+ if (pm_print_times_enabled) {
pr_info("calling %s+ @ %i, parent: %s\n",
dev_name(dev), task_pid_nr(current),
dev->parent ? dev_name(dev->parent) : "none");
@@ -181,7 +181,7 @@
{
ktime_t delta, rettime;
- if (initcall_debug) {
+ if (pm_print_times_enabled) {
rettime = ktime_get();
delta = ktime_sub(rettime, calltime);
pr_info("call %s+ returned %d after %Ld usecs\n", dev_name(dev),
@@ -467,6 +467,7 @@
mutex_unlock(&dpm_list_mtx);
dpm_show_time(starttime, state, "noirq");
resume_device_irqs();
+ cpuidle_resume();
}
/**
@@ -867,6 +868,7 @@
ktime_t starttime = ktime_get();
int error = 0;
+ cpuidle_pause();
suspend_device_irqs();
mutex_lock(&dpm_list_mtx);
while (!list_empty(&dpm_late_early_list)) {
@@ -989,8 +991,16 @@
int dpm_suspend_end(pm_message_t state)
{
int error = dpm_suspend_late(state);
+ if (error)
+ return error;
- return error ? : dpm_suspend_noirq(state);
+ error = dpm_suspend_noirq(state);
+ if (error) {
+ dpm_resume_early(state);
+ return error;
+ }
+
+ return 0;
}
EXPORT_SYMBOL_GPL(dpm_suspend_end);
@@ -1031,7 +1041,7 @@
dpm_wait_for_children(dev, async);
if (async_error)
- return 0;
+ goto Complete;
pm_runtime_get_noresume(dev);
if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
@@ -1040,7 +1050,7 @@
if (pm_wakeup_pending()) {
pm_runtime_put_sync(dev);
async_error = -EBUSY;
- return 0;
+ goto Complete;
}
device_lock(dev);
@@ -1097,6 +1107,8 @@
}
device_unlock(dev);
+
+ Complete:
complete_all(&dev->power.completion);
if (error) {
diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c
index fd849a2..74a67e0 100644
--- a/drivers/base/power/qos.c
+++ b/drivers/base/power/qos.c
@@ -462,7 +462,7 @@
static void __dev_pm_qos_drop_user_request(struct device *dev)
{
dev_pm_qos_remove_request(dev->power.pq_req);
- dev->power.pq_req = 0;
+ dev->power.pq_req = NULL;
}
/**
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index 48be2ad..b91dc6f 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -474,6 +474,8 @@
#endif
+#ifdef CONFIG_PM_SLEEP
+
static ssize_t async_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
@@ -500,6 +502,8 @@
}
static DEVICE_ATTR(async, 0644, async_show, async_store);
+
+#endif
#endif /* CONFIG_PM_ADVANCED_DEBUG */
static struct attribute *power_attrs[] = {
diff --git a/drivers/base/regmap/internal.h b/drivers/base/regmap/internal.h
index b986b86..80f9ab9 100644
--- a/drivers/base/regmap/internal.h
+++ b/drivers/base/regmap/internal.h
@@ -95,6 +95,9 @@
/* if set, converts bulk rw to single rw */
bool use_single_rw;
+
+ struct rb_root range_tree;
+ void *selector_work_buf; /* Scratch buffer used for selector */
};
struct regcache_ops {
@@ -115,6 +118,20 @@
int _regmap_write(struct regmap *map, unsigned int reg,
unsigned int val);
+struct regmap_range_node {
+ struct rb_node node;
+
+ unsigned int range_min;
+ unsigned int range_max;
+
+ unsigned int selector_reg;
+ unsigned int selector_mask;
+ int selector_shift;
+
+ unsigned int window_start;
+ unsigned int window_len;
+};
+
#ifdef CONFIG_DEBUG_FS
extern void regmap_debugfs_initcall(void);
extern void regmap_debugfs_init(struct regmap *map, const char *name);
diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index 4fac4b9..a897346 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -24,14 +24,18 @@
struct mutex lock;
struct regmap *map;
- struct regmap_irq_chip *chip;
+ const struct regmap_irq_chip *chip;
int irq_base;
struct irq_domain *domain;
+ int irq;
+ int wake_count;
+
unsigned int *status_buf;
unsigned int *mask_buf;
unsigned int *mask_buf_def;
+ unsigned int *wake_buf;
unsigned int irq_reg_stride;
};
@@ -71,6 +75,16 @@
d->chip->mask_base + (i * map->reg_stride));
}
+ /* If we've changed our wakeup count propagate it to the parent */
+ if (d->wake_count < 0)
+ for (i = d->wake_count; i < 0; i++)
+ irq_set_irq_wake(d->irq, 0);
+ else if (d->wake_count > 0)
+ for (i = 0; i < d->wake_count; i++)
+ irq_set_irq_wake(d->irq, 1);
+
+ d->wake_count = 0;
+
mutex_unlock(&d->lock);
}
@@ -92,18 +106,41 @@
d->mask_buf[irq_data->reg_offset / map->reg_stride] |= irq_data->mask;
}
+static int regmap_irq_set_wake(struct irq_data *data, unsigned int on)
+{
+ struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+ struct regmap *map = d->map;
+ const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
+
+ if (!d->chip->wake_base)
+ return -EINVAL;
+
+ if (on) {
+ d->wake_buf[irq_data->reg_offset / map->reg_stride]
+ &= ~irq_data->mask;
+ d->wake_count++;
+ } else {
+ d->wake_buf[irq_data->reg_offset / map->reg_stride]
+ |= irq_data->mask;
+ d->wake_count--;
+ }
+
+ return 0;
+}
+
static struct irq_chip regmap_irq_chip = {
.name = "regmap",
.irq_bus_lock = regmap_irq_lock,
.irq_bus_sync_unlock = regmap_irq_sync_unlock,
.irq_disable = regmap_irq_disable,
.irq_enable = regmap_irq_enable,
+ .irq_set_wake = regmap_irq_set_wake,
};
static irqreturn_t regmap_irq_thread(int irq, void *d)
{
struct regmap_irq_chip_data *data = d;
- struct regmap_irq_chip *chip = data->chip;
+ const struct regmap_irq_chip *chip = data->chip;
struct regmap *map = data->map;
int ret, i;
bool handled = false;
@@ -195,7 +232,7 @@
* register values used by the IRQ controller over suspend and resume.
*/
int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
- int irq_base, struct regmap_irq_chip *chip,
+ int irq_base, const struct regmap_irq_chip *chip,
struct regmap_irq_chip_data **data)
{
struct regmap_irq_chip_data *d;
@@ -240,6 +277,14 @@
if (!d->mask_buf_def)
goto err_alloc;
+ if (chip->wake_base) {
+ d->wake_buf = kzalloc(sizeof(unsigned int) * chip->num_regs,
+ GFP_KERNEL);
+ if (!d->wake_buf)
+ goto err_alloc;
+ }
+
+ d->irq = irq;
d->map = map;
d->chip = chip;
d->irq_base = irq_base;
@@ -294,6 +339,7 @@
err_domain:
/* Should really dispose of the domain but... */
err_alloc:
+ kfree(d->wake_buf);
kfree(d->mask_buf_def);
kfree(d->mask_buf);
kfree(d->status_buf);
@@ -315,6 +361,7 @@
free_irq(irq, d);
/* We should unmap the domain but... */
+ kfree(d->wake_buf);
kfree(d->mask_buf_def);
kfree(d->mask_buf);
kfree(d->status_buf);
@@ -346,6 +393,10 @@
*/
int regmap_irq_get_virq(struct regmap_irq_chip_data *data, int irq)
{
+ /* Handle holes in the IRQ list */
+ if (!data->chip->irqs[irq].mask)
+ return -EINVAL;
+
return irq_create_mapping(data->domain, irq);
}
EXPORT_SYMBOL_GPL(regmap_irq_get_virq);
diff --git a/drivers/base/regmap/regmap-mmio.c b/drivers/base/regmap/regmap-mmio.c
index febd6de..f05fc74 100644
--- a/drivers/base/regmap/regmap-mmio.c
+++ b/drivers/base/regmap/regmap-mmio.c
@@ -37,7 +37,7 @@
BUG_ON(reg_size != 4);
- offset = be32_to_cpup(reg);
+ offset = *(u32 *)reg;
while (val_size) {
switch (ctx->val_bytes) {
@@ -45,14 +45,14 @@
writeb(*(u8 *)val, ctx->regs + offset);
break;
case 2:
- writew(be16_to_cpup(val), ctx->regs + offset);
+ writew(*(u16 *)val, ctx->regs + offset);
break;
case 4:
- writel(be32_to_cpup(val), ctx->regs + offset);
+ writel(*(u32 *)val, ctx->regs + offset);
break;
#ifdef CONFIG_64BIT
case 8:
- writeq(be64_to_cpup(val), ctx->regs + offset);
+ writeq(*(u64 *)val, ctx->regs + offset);
break;
#endif
default:
@@ -83,7 +83,7 @@
BUG_ON(reg_size != 4);
- offset = be32_to_cpup(reg);
+ offset = *(u32 *)reg;
while (val_size) {
switch (ctx->val_bytes) {
@@ -91,14 +91,14 @@
*(u8 *)val = readb(ctx->regs + offset);
break;
case 2:
- *(u16 *)val = cpu_to_be16(readw(ctx->regs + offset));
+ *(u16 *)val = readw(ctx->regs + offset);
break;
case 4:
- *(u32 *)val = cpu_to_be32(readl(ctx->regs + offset));
+ *(u32 *)val = readl(ctx->regs + offset);
break;
#ifdef CONFIG_64BIT
case 8:
- *(u64 *)val = cpu_to_be32(readq(ctx->regs + offset));
+ *(u64 *)val = readq(ctx->regs + offset);
break;
#endif
default:
@@ -124,9 +124,11 @@
.gather_write = regmap_mmio_gather_write,
.read = regmap_mmio_read,
.free_context = regmap_mmio_free_context,
+ .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+ .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
};
-struct regmap_mmio_context *regmap_mmio_gen_context(void __iomem *regs,
+static struct regmap_mmio_context *regmap_mmio_gen_context(void __iomem *regs,
const struct regmap_config *config)
{
struct regmap_mmio_context *ctx;
@@ -162,7 +164,15 @@
if (config->reg_stride < min_stride)
return ERR_PTR(-EINVAL);
- ctx = kzalloc(GFP_KERNEL, sizeof(*ctx));
+ switch (config->reg_format_endian) {
+ case REGMAP_ENDIAN_DEFAULT:
+ case REGMAP_ENDIAN_NATIVE:
+ break;
+ default:
+ return ERR_PTR(-EINVAL);
+ }
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return ERR_PTR(-ENOMEM);
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 0bcda48..c241ae2 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -15,12 +15,25 @@
#include <linux/export.h>
#include <linux/mutex.h>
#include <linux/err.h>
+#include <linux/rbtree.h>
#define CREATE_TRACE_POINTS
#include <trace/events/regmap.h>
#include "internal.h"
+/*
+ * Sometimes for failures during very early init the trace
+ * infrastructure isn't available early enough to be used. For this
+ * sort of problem defining LOG_DEVICE will add printks for basic
+ * register I/O on a specific device.
+ */
+#undef LOG_DEVICE
+
+static int _regmap_update_bits(struct regmap *map, unsigned int reg,
+ unsigned int mask, unsigned int val,
+ bool *change);
+
bool regmap_writeable(struct regmap *map, unsigned int reg)
{
if (map->max_register && reg > map->max_register)
@@ -119,13 +132,19 @@
b[0] = val << shift;
}
-static void regmap_format_16(void *buf, unsigned int val, unsigned int shift)
+static void regmap_format_16_be(void *buf, unsigned int val, unsigned int shift)
{
__be16 *b = buf;
b[0] = cpu_to_be16(val << shift);
}
+static void regmap_format_16_native(void *buf, unsigned int val,
+ unsigned int shift)
+{
+ *(u16 *)buf = val << shift;
+}
+
static void regmap_format_24(void *buf, unsigned int val, unsigned int shift)
{
u8 *b = buf;
@@ -137,13 +156,19 @@
b[2] = val;
}
-static void regmap_format_32(void *buf, unsigned int val, unsigned int shift)
+static void regmap_format_32_be(void *buf, unsigned int val, unsigned int shift)
{
__be32 *b = buf;
b[0] = cpu_to_be32(val << shift);
}
+static void regmap_format_32_native(void *buf, unsigned int val,
+ unsigned int shift)
+{
+ *(u32 *)buf = val << shift;
+}
+
static unsigned int regmap_parse_8(void *buf)
{
u8 *b = buf;
@@ -151,7 +176,7 @@
return b[0];
}
-static unsigned int regmap_parse_16(void *buf)
+static unsigned int regmap_parse_16_be(void *buf)
{
__be16 *b = buf;
@@ -160,6 +185,11 @@
return b[0];
}
+static unsigned int regmap_parse_16_native(void *buf)
+{
+ return *(u16 *)buf;
+}
+
static unsigned int regmap_parse_24(void *buf)
{
u8 *b = buf;
@@ -170,7 +200,7 @@
return ret;
}
-static unsigned int regmap_parse_32(void *buf)
+static unsigned int regmap_parse_32_be(void *buf)
{
__be32 *b = buf;
@@ -179,6 +209,11 @@
return b[0];
}
+static unsigned int regmap_parse_32_native(void *buf)
+{
+ return *(u32 *)buf;
+}
+
static void regmap_lock_mutex(struct regmap *map)
{
mutex_lock(&map->mutex);
@@ -208,6 +243,67 @@
*/
}
+static bool _regmap_range_add(struct regmap *map,
+ struct regmap_range_node *data)
+{
+ struct rb_root *root = &map->range_tree;
+ struct rb_node **new = &(root->rb_node), *parent = NULL;
+
+ while (*new) {
+ struct regmap_range_node *this =
+ container_of(*new, struct regmap_range_node, node);
+
+ parent = *new;
+ if (data->range_max < this->range_min)
+ new = &((*new)->rb_left);
+ else if (data->range_min > this->range_max)
+ new = &((*new)->rb_right);
+ else
+ return false;
+ }
+
+ rb_link_node(&data->node, parent, new);
+ rb_insert_color(&data->node, root);
+
+ return true;
+}
+
+static struct regmap_range_node *_regmap_range_lookup(struct regmap *map,
+ unsigned int reg)
+{
+ struct rb_node *node = map->range_tree.rb_node;
+
+ while (node) {
+ struct regmap_range_node *this =
+ container_of(node, struct regmap_range_node, node);
+
+ if (reg < this->range_min)
+ node = node->rb_left;
+ else if (reg > this->range_max)
+ node = node->rb_right;
+ else
+ return this;
+ }
+
+ return NULL;
+}
+
+static void regmap_range_exit(struct regmap *map)
+{
+ struct rb_node *next;
+ struct regmap_range_node *range_node;
+
+ next = rb_first(&map->range_tree);
+ while (next) {
+ range_node = rb_entry(next, struct regmap_range_node, node);
+ next = rb_next(&range_node->node);
+ rb_erase(&range_node->node, &map->range_tree);
+ kfree(range_node);
+ }
+
+ kfree(map->selector_work_buf);
+}
+
/**
* regmap_init(): Initialise register map
*
@@ -227,6 +323,8 @@
{
struct regmap *map, **m;
int ret = -EINVAL;
+ enum regmap_endian reg_endian, val_endian;
+ int i, j;
if (!bus || !config)
goto err;
@@ -246,11 +344,11 @@
map->lock = regmap_lock_mutex;
map->unlock = regmap_unlock_mutex;
}
- map->format.buf_size = (config->reg_bits + config->val_bits) / 8;
map->format.reg_bytes = DIV_ROUND_UP(config->reg_bits, 8);
map->format.pad_bytes = config->pad_bits / 8;
map->format.val_bytes = DIV_ROUND_UP(config->val_bits, 8);
- map->format.buf_size += map->format.pad_bytes;
+ map->format.buf_size = DIV_ROUND_UP(config->reg_bits +
+ config->val_bits + config->pad_bits, 8);
map->reg_shift = config->pad_bits % 8;
if (config->reg_stride)
map->reg_stride = config->reg_stride;
@@ -275,6 +373,18 @@
map->read_flag_mask = bus->read_flag_mask;
}
+ reg_endian = config->reg_format_endian;
+ if (reg_endian == REGMAP_ENDIAN_DEFAULT)
+ reg_endian = bus->reg_format_endian_default;
+ if (reg_endian == REGMAP_ENDIAN_DEFAULT)
+ reg_endian = REGMAP_ENDIAN_BIG;
+
+ val_endian = config->val_format_endian;
+ if (val_endian == REGMAP_ENDIAN_DEFAULT)
+ val_endian = bus->val_format_endian_default;
+ if (val_endian == REGMAP_ENDIAN_DEFAULT)
+ val_endian = REGMAP_ENDIAN_BIG;
+
switch (config->reg_bits + map->reg_shift) {
case 2:
switch (config->val_bits) {
@@ -321,11 +431,29 @@
break;
case 16:
- map->format.format_reg = regmap_format_16;
+ switch (reg_endian) {
+ case REGMAP_ENDIAN_BIG:
+ map->format.format_reg = regmap_format_16_be;
+ break;
+ case REGMAP_ENDIAN_NATIVE:
+ map->format.format_reg = regmap_format_16_native;
+ break;
+ default:
+ goto err_map;
+ }
break;
case 32:
- map->format.format_reg = regmap_format_32;
+ switch (reg_endian) {
+ case REGMAP_ENDIAN_BIG:
+ map->format.format_reg = regmap_format_32_be;
+ break;
+ case REGMAP_ENDIAN_NATIVE:
+ map->format.format_reg = regmap_format_32_native;
+ break;
+ default:
+ goto err_map;
+ }
break;
default:
@@ -338,21 +466,47 @@
map->format.parse_val = regmap_parse_8;
break;
case 16:
- map->format.format_val = regmap_format_16;
- map->format.parse_val = regmap_parse_16;
+ switch (val_endian) {
+ case REGMAP_ENDIAN_BIG:
+ map->format.format_val = regmap_format_16_be;
+ map->format.parse_val = regmap_parse_16_be;
+ break;
+ case REGMAP_ENDIAN_NATIVE:
+ map->format.format_val = regmap_format_16_native;
+ map->format.parse_val = regmap_parse_16_native;
+ break;
+ default:
+ goto err_map;
+ }
break;
case 24:
+ if (val_endian != REGMAP_ENDIAN_BIG)
+ goto err_map;
map->format.format_val = regmap_format_24;
map->format.parse_val = regmap_parse_24;
break;
case 32:
- map->format.format_val = regmap_format_32;
- map->format.parse_val = regmap_parse_32;
+ switch (val_endian) {
+ case REGMAP_ENDIAN_BIG:
+ map->format.format_val = regmap_format_32_be;
+ map->format.parse_val = regmap_parse_32_be;
+ break;
+ case REGMAP_ENDIAN_NATIVE:
+ map->format.format_val = regmap_format_32_native;
+ map->format.parse_val = regmap_parse_32_native;
+ break;
+ default:
+ goto err_map;
+ }
break;
}
- if (map->format.format_write)
+ if (map->format.format_write) {
+ if ((reg_endian != REGMAP_ENDIAN_BIG) ||
+ (val_endian != REGMAP_ENDIAN_BIG))
+ goto err_map;
map->use_single_rw = true;
+ }
if (!map->format.format_write &&
!(map->format.format_reg && map->format.format_val))
@@ -364,26 +518,88 @@
goto err_map;
}
- regmap_debugfs_init(map, config->name);
+ map->range_tree = RB_ROOT;
+ for (i = 0; i < config->n_ranges; i++) {
+ const struct regmap_range_cfg *range_cfg = &config->ranges[i];
+ struct regmap_range_node *new;
+
+ /* Sanity check */
+ if (range_cfg->range_max < range_cfg->range_min ||
+ range_cfg->range_max > map->max_register ||
+ range_cfg->selector_reg > map->max_register ||
+ range_cfg->window_len == 0)
+ goto err_range;
+
+ /* Make sure, that this register range has no selector
+ or data window within its boundary */
+ for (j = 0; j < config->n_ranges; j++) {
+ unsigned sel_reg = config->ranges[j].selector_reg;
+ unsigned win_min = config->ranges[j].window_start;
+ unsigned win_max = win_min +
+ config->ranges[j].window_len - 1;
+
+ if (range_cfg->range_min <= sel_reg &&
+ sel_reg <= range_cfg->range_max) {
+ goto err_range;
+ }
+
+ if (!(win_max < range_cfg->range_min ||
+ win_min > range_cfg->range_max)) {
+ goto err_range;
+ }
+ }
+
+ new = kzalloc(sizeof(*new), GFP_KERNEL);
+ if (new == NULL) {
+ ret = -ENOMEM;
+ goto err_range;
+ }
+
+ new->range_min = range_cfg->range_min;
+ new->range_max = range_cfg->range_max;
+ new->selector_reg = range_cfg->selector_reg;
+ new->selector_mask = range_cfg->selector_mask;
+ new->selector_shift = range_cfg->selector_shift;
+ new->window_start = range_cfg->window_start;
+ new->window_len = range_cfg->window_len;
+
+ if (_regmap_range_add(map, new) == false) {
+ kfree(new);
+ goto err_range;
+ }
+
+ if (map->selector_work_buf == NULL) {
+ map->selector_work_buf =
+ kzalloc(map->format.buf_size, GFP_KERNEL);
+ if (map->selector_work_buf == NULL) {
+ ret = -ENOMEM;
+ goto err_range;
+ }
+ }
+ }
ret = regcache_init(map, config);
if (ret < 0)
- goto err_free_workbuf;
+ goto err_range;
+
+ regmap_debugfs_init(map, config->name);
/* Add a devres resource for dev_get_regmap() */
m = devres_alloc(dev_get_regmap_release, sizeof(*m), GFP_KERNEL);
if (!m) {
ret = -ENOMEM;
- goto err_cache;
+ goto err_debugfs;
}
*m = map;
devres_add(dev, m);
return map;
-err_cache:
+err_debugfs:
+ regmap_debugfs_exit(map);
regcache_exit(map);
-err_free_workbuf:
+err_range:
+ regmap_range_exit(map);
kfree(map->work_buf);
err_map:
kfree(map);
@@ -471,6 +687,7 @@
return ret;
}
+EXPORT_SYMBOL_GPL(regmap_reinit_cache);
/**
* regmap_exit(): Free a previously allocated register map
@@ -479,6 +696,7 @@
{
regcache_exit(map);
regmap_debugfs_exit(map);
+ regmap_range_exit(map);
if (map->bus->free_context)
map->bus->free_context(map->bus_context);
kfree(map->work_buf);
@@ -524,6 +742,57 @@
}
EXPORT_SYMBOL_GPL(dev_get_regmap);
+static int _regmap_select_page(struct regmap *map, unsigned int *reg,
+ unsigned int val_num)
+{
+ struct regmap_range_node *range;
+ void *orig_work_buf;
+ unsigned int win_offset;
+ unsigned int win_page;
+ bool page_chg;
+ int ret;
+
+ range = _regmap_range_lookup(map, *reg);
+ if (range) {
+ win_offset = (*reg - range->range_min) % range->window_len;
+ win_page = (*reg - range->range_min) / range->window_len;
+
+ if (val_num > 1) {
+ /* Bulk write shouldn't cross range boundary */
+ if (*reg + val_num - 1 > range->range_max)
+ return -EINVAL;
+
+ /* ... or single page boundary */
+ if (val_num > range->window_len - win_offset)
+ return -EINVAL;
+ }
+
+ /* It is possible to have selector register inside data window.
+ In that case, selector register is located on every page and
+ it needs no page switching, when accessed alone. */
+ if (val_num > 1 ||
+ range->window_start + win_offset != range->selector_reg) {
+ /* Use separate work_buf during page switching */
+ orig_work_buf = map->work_buf;
+ map->work_buf = map->selector_work_buf;
+
+ ret = _regmap_update_bits(map, range->selector_reg,
+ range->selector_mask,
+ win_page << range->selector_shift,
+ &page_chg);
+
+ map->work_buf = orig_work_buf;
+
+ if (ret < 0)
+ return ret;
+ }
+
+ *reg = range->window_start + win_offset;
+ }
+
+ return 0;
+}
+
static int _regmap_raw_write(struct regmap *map, unsigned int reg,
const void *val, size_t val_len)
{
@@ -561,6 +830,10 @@
}
}
+ ret = _regmap_select_page(map, ®, val_len / map->format.val_bytes);
+ if (ret < 0)
+ return ret;
+
map->format.format_reg(map->work_buf, reg, map->reg_shift);
u8[0] |= map->write_flag_mask;
@@ -621,9 +894,18 @@
}
}
+#ifdef LOG_DEVICE
+ if (strcmp(dev_name(map->dev), LOG_DEVICE) == 0)
+ dev_info(map->dev, "%x <= %x\n", reg, val);
+#endif
+
trace_regmap_reg_write(map->dev, reg, val);
if (map->format.format_write) {
+ ret = _regmap_select_page(map, ®, 1);
+ if (ret < 0)
+ return ret;
+
map->format.format_write(map, reg, val);
trace_regmap_hw_write_start(map->dev, reg, 1);
@@ -781,6 +1063,10 @@
u8 *u8 = map->work_buf;
int ret;
+ ret = _regmap_select_page(map, ®, val_len / map->format.val_bytes);
+ if (ret < 0)
+ return ret;
+
map->format.format_reg(map->work_buf, reg, map->reg_shift);
/*
@@ -824,6 +1110,12 @@
ret = _regmap_raw_read(map, reg, map->work_buf, map->format.val_bytes);
if (ret == 0) {
*val = map->format.parse_val(map->work_buf);
+
+#ifdef LOG_DEVICE
+ if (strcmp(dev_name(map->dev), LOG_DEVICE) == 0)
+ dev_info(map->dev, "%x => %x\n", reg, *val);
+#endif
+
trace_regmap_reg_read(map->dev, reg, *val);
}
@@ -980,11 +1272,9 @@
int ret;
unsigned int tmp, orig;
- map->lock(map);
-
ret = _regmap_read(map, reg, &orig);
if (ret != 0)
- goto out;
+ return ret;
tmp = orig & ~mask;
tmp |= val & mask;
@@ -996,9 +1286,6 @@
*change = false;
}
-out:
- map->unlock(map);
-
return ret;
}
@@ -1016,7 +1303,13 @@
unsigned int mask, unsigned int val)
{
bool change;
- return _regmap_update_bits(map, reg, mask, val, &change);
+ int ret;
+
+ map->lock(map);
+ ret = _regmap_update_bits(map, reg, mask, val, &change);
+ map->unlock(map);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(regmap_update_bits);
@@ -1036,7 +1329,12 @@
unsigned int mask, unsigned int val,
bool *change)
{
- return _regmap_update_bits(map, reg, mask, val, change);
+ int ret;
+
+ map->lock(map);
+ ret = _regmap_update_bits(map, reg, mask, val, change);
+ map->unlock(map);
+ return ret;
}
EXPORT_SYMBOL_GPL(regmap_update_bits_check);
diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c
index a058842..61ce405 100644
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -139,7 +139,9 @@
bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
break;
case 0x4331:
- /* BCM4331 workaround is SPROM-related, we put it in sprom.c */
+ case 43431:
+ /* Ext PA lines must be enabled for tx on BCM4331 */
+ bcma_chipco_bcm4331_ext_pa_lines_ctl(cc, true);
break;
case 43224:
if (bus->chipinfo.rev == 0) {
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
index 9a96f14..c32ebd5 100644
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -232,17 +232,19 @@
int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
bool enable)
{
- struct pci_dev *pdev = pc->core->bus->host_pci;
+ struct pci_dev *pdev;
u32 coremask, tmp;
int err = 0;
- if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
+ if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
/* This bcma device is not on a PCI host-bus. So the IRQs are
* not routed through the PCI core.
* So we must not enable routing through the PCI core. */
goto out;
}
+ pdev = pc->core->bus->host_pci;
+
err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
if (err)
goto out;
diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c
index c7f9335..f16f42d3 100644
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -579,13 +579,13 @@
if (!sprom)
return -ENOMEM;
- if (bus->chipinfo.id == 0x4331)
+ if (bus->chipinfo.id == 0x4331 || bus->chipinfo.id == 43431)
bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
pr_debug("SPROM offset 0x%x\n", offset);
bcma_sprom_read(bus, offset, sprom);
- if (bus->chipinfo.id == 0x4331)
+ if (bus->chipinfo.id == 0x4331 || bus->chipinfo.id == 43431)
bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
err = bcma_sprom_valid(sprom);
diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c
index b5c5ff5..fcb956b 100644
--- a/drivers/block/drbd/drbd_bitmap.c
+++ b/drivers/block/drbd/drbd_bitmap.c
@@ -1475,10 +1475,17 @@
first_word = 0;
spin_lock_irq(&b->bm_lock);
}
-
/* last page (respectively only page, for first page == last page) */
last_word = MLPP(el >> LN2_BPL);
- bm_set_full_words_within_one_page(mdev->bitmap, last_page, first_word, last_word);
+
+ /* consider bitmap->bm_bits = 32768, bitmap->bm_number_of_pages = 1. (or multiples).
+ * ==> e = 32767, el = 32768, last_page = 2,
+ * and now last_word = 0.
+ * We do not want to touch last_page in this case,
+ * as we did not allocate it, it is not present in bitmap->bm_pages.
+ */
+ if (last_word)
+ bm_set_full_words_within_one_page(mdev->bitmap, last_page, first_word, last_word);
/* possibly trailing bits.
* example: (e & 63) == 63, el will be e+1.
diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index 9c5c849..8e93a6a 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -472,12 +472,17 @@
req->rq_state |= RQ_LOCAL_COMPLETED;
req->rq_state &= ~RQ_LOCAL_PENDING;
- D_ASSERT(!(req->rq_state & RQ_NET_MASK));
+ if (req->rq_state & RQ_LOCAL_ABORTED) {
+ _req_may_be_done(req, m);
+ break;
+ }
__drbd_chk_io_error(mdev, false);
goto_queue_for_net_read:
+ D_ASSERT(!(req->rq_state & RQ_NET_MASK));
+
/* no point in retrying if there is no good remote data,
* or we have no connection. */
if (mdev->state.pdsk != D_UP_TO_DATE) {
@@ -765,6 +770,40 @@
return 0 == drbd_bm_count_bits(mdev, sbnr, ebnr);
}
+static void maybe_pull_ahead(struct drbd_conf *mdev)
+{
+ int congested = 0;
+
+ /* If I don't even have good local storage, we can not reasonably try
+ * to pull ahead of the peer. We also need the local reference to make
+ * sure mdev->act_log is there.
+ * Note: caller has to make sure that net_conf is there.
+ */
+ if (!get_ldev_if_state(mdev, D_UP_TO_DATE))
+ return;
+
+ if (mdev->net_conf->cong_fill &&
+ atomic_read(&mdev->ap_in_flight) >= mdev->net_conf->cong_fill) {
+ dev_info(DEV, "Congestion-fill threshold reached\n");
+ congested = 1;
+ }
+
+ if (mdev->act_log->used >= mdev->net_conf->cong_extents) {
+ dev_info(DEV, "Congestion-extents threshold reached\n");
+ congested = 1;
+ }
+
+ if (congested) {
+ queue_barrier(mdev); /* last barrier, after mirrored writes */
+
+ if (mdev->net_conf->on_congestion == OC_PULL_AHEAD)
+ _drbd_set_state(_NS(mdev, conn, C_AHEAD), 0, NULL);
+ else /*mdev->net_conf->on_congestion == OC_DISCONNECT */
+ _drbd_set_state(_NS(mdev, conn, C_DISCONNECTING), 0, NULL);
+ }
+ put_ldev(mdev);
+}
+
static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio, unsigned long start_time)
{
const int rw = bio_rw(bio);
@@ -972,29 +1011,8 @@
_req_mod(req, queue_for_send_oos);
if (remote &&
- mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96) {
- int congested = 0;
-
- if (mdev->net_conf->cong_fill &&
- atomic_read(&mdev->ap_in_flight) >= mdev->net_conf->cong_fill) {
- dev_info(DEV, "Congestion-fill threshold reached\n");
- congested = 1;
- }
-
- if (mdev->act_log->used >= mdev->net_conf->cong_extents) {
- dev_info(DEV, "Congestion-extents threshold reached\n");
- congested = 1;
- }
-
- if (congested) {
- queue_barrier(mdev); /* last barrier, after mirrored writes */
-
- if (mdev->net_conf->on_congestion == OC_PULL_AHEAD)
- _drbd_set_state(_NS(mdev, conn, C_AHEAD), 0, NULL);
- else /*mdev->net_conf->on_congestion == OC_DISCONNECT */
- _drbd_set_state(_NS(mdev, conn, C_DISCONNECTING), 0, NULL);
- }
- }
+ mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96)
+ maybe_pull_ahead(mdev);
spin_unlock_irq(&mdev->req_lock);
kfree(b); /* if someone else has beaten us to it... */
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index cce7df3..553f43a 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -671,6 +671,7 @@
if (drive == current_reqD)
drive = current_drive;
+ __cancel_delayed_work(&fd_timeout);
if (drive < 0 || drive >= N_DRIVE) {
delay = 20UL * HZ;
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index bbca966..3bba655 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1597,14 +1597,12 @@
struct gendisk *disk;
int err;
+ err = -ENOMEM;
lo = kzalloc(sizeof(*lo), GFP_KERNEL);
- if (!lo) {
- err = -ENOMEM;
+ if (!lo)
goto out;
- }
- err = idr_pre_get(&loop_index_idr, GFP_KERNEL);
- if (err < 0)
+ if (!idr_pre_get(&loop_index_idr, GFP_KERNEL))
goto out_free_dev;
if (i >= 0) {
diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c
index 76fa3de..1788f491 100644
--- a/drivers/block/mg_disk.c
+++ b/drivers/block/mg_disk.c
@@ -780,9 +780,9 @@
.getgeo = mg_getgeo
};
-static int mg_suspend(struct platform_device *plat_dev, pm_message_t state)
+static int mg_suspend(struct device *dev)
{
- struct mg_drv_data *prv_data = plat_dev->dev.platform_data;
+ struct mg_drv_data *prv_data = dev->platform_data;
struct mg_host *host = prv_data->host;
if (mg_wait(host, MG_STAT_READY, MG_TMAX_CONF_TO_CMD))
@@ -804,9 +804,9 @@
return 0;
}
-static int mg_resume(struct platform_device *plat_dev)
+static int mg_resume(struct device *dev)
{
- struct mg_drv_data *prv_data = plat_dev->dev.platform_data;
+ struct mg_drv_data *prv_data = dev->platform_data;
struct mg_host *host = prv_data->host;
if (mg_wait(host, MG_STAT_READY, MG_TMAX_CONF_TO_CMD))
@@ -825,6 +825,8 @@
return 0;
}
+static SIMPLE_DEV_PM_OPS(mg_pm, mg_suspend, mg_resume);
+
static int mg_probe(struct platform_device *plat_dev)
{
struct mg_host *host;
@@ -1074,11 +1076,10 @@
static struct platform_driver mg_disk_driver = {
.probe = mg_probe,
.remove = mg_remove,
- .suspend = mg_suspend,
- .resume = mg_resume,
.driver = {
.name = MG_DEV_NAME,
.owner = THIS_MODULE,
+ .pm = &mg_pm,
}
};
diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 264bc77..a8fddeb 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -37,6 +37,7 @@
#include <linux/kthread.h>
#include <../drivers/ata/ahci.h>
#include <linux/export.h>
+#include <linux/debugfs.h>
#include "mtip32xx.h"
#define HW_CMD_SLOT_SZ (MTIP_MAX_COMMAND_SLOTS * 32)
@@ -85,6 +86,7 @@
* allocated in mtip_init().
*/
static int mtip_major;
+static struct dentry *dfs_parent;
static DEFINE_SPINLOCK(rssd_index_lock);
static DEFINE_IDA(rssd_index_ida);
@@ -2546,7 +2548,7 @@
}
/*
- * Sysfs register/status dump.
+ * Sysfs status dump.
*
* @dev Pointer to the device structure, passed by the kernrel.
* @attr Pointer to the device_attribute structure passed by the kernel.
@@ -2555,71 +2557,6 @@
* return value
* The size, in bytes, of the data copied into buf.
*/
-static ssize_t mtip_hw_show_registers(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- u32 group_allocated;
- struct driver_data *dd = dev_to_disk(dev)->private_data;
- int size = 0;
- int n;
-
- size += sprintf(&buf[size], "Hardware\n--------\n");
- size += sprintf(&buf[size], "S ACTive : [ 0x");
-
- for (n = dd->slot_groups-1; n >= 0; n--)
- size += sprintf(&buf[size], "%08X ",
- readl(dd->port->s_active[n]));
-
- size += sprintf(&buf[size], "]\n");
- size += sprintf(&buf[size], "Command Issue : [ 0x");
-
- for (n = dd->slot_groups-1; n >= 0; n--)
- size += sprintf(&buf[size], "%08X ",
- readl(dd->port->cmd_issue[n]));
-
- size += sprintf(&buf[size], "]\n");
- size += sprintf(&buf[size], "Completed : [ 0x");
-
- for (n = dd->slot_groups-1; n >= 0; n--)
- size += sprintf(&buf[size], "%08X ",
- readl(dd->port->completed[n]));
-
- size += sprintf(&buf[size], "]\n");
- size += sprintf(&buf[size], "PORT IRQ STAT : [ 0x%08X ]\n",
- readl(dd->port->mmio + PORT_IRQ_STAT));
- size += sprintf(&buf[size], "HOST IRQ STAT : [ 0x%08X ]\n",
- readl(dd->mmio + HOST_IRQ_STAT));
- size += sprintf(&buf[size], "\n");
-
- size += sprintf(&buf[size], "Local\n-----\n");
- size += sprintf(&buf[size], "Allocated : [ 0x");
-
- for (n = dd->slot_groups-1; n >= 0; n--) {
- if (sizeof(long) > sizeof(u32))
- group_allocated =
- dd->port->allocated[n/2] >> (32*(n&1));
- else
- group_allocated = dd->port->allocated[n];
- size += sprintf(&buf[size], "%08X ", group_allocated);
- }
- size += sprintf(&buf[size], "]\n");
-
- size += sprintf(&buf[size], "Commands in Q: [ 0x");
-
- for (n = dd->slot_groups-1; n >= 0; n--) {
- if (sizeof(long) > sizeof(u32))
- group_allocated =
- dd->port->cmds_to_issue[n/2] >> (32*(n&1));
- else
- group_allocated = dd->port->cmds_to_issue[n];
- size += sprintf(&buf[size], "%08X ", group_allocated);
- }
- size += sprintf(&buf[size], "]\n");
-
- return size;
-}
-
static ssize_t mtip_hw_show_status(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -2637,24 +2574,121 @@
return size;
}
-static ssize_t mtip_hw_show_flags(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL);
+
+static ssize_t mtip_hw_read_registers(struct file *f, char __user *ubuf,
+ size_t len, loff_t *offset)
{
- struct driver_data *dd = dev_to_disk(dev)->private_data;
- int size = 0;
+ struct driver_data *dd = (struct driver_data *)f->private_data;
+ char buf[MTIP_DFS_MAX_BUF_SIZE];
+ u32 group_allocated;
+ int size = *offset;
+ int n;
- size += sprintf(&buf[size], "Flag in port struct : [ %08lX ]\n",
- dd->port->flags);
- size += sprintf(&buf[size], "Flag in dd struct : [ %08lX ]\n",
- dd->dd_flag);
+ if (!len || size)
+ return 0;
- return size;
+ if (size < 0)
+ return -EINVAL;
+
+ size += sprintf(&buf[size], "H/ S ACTive : [ 0x");
+
+ for (n = dd->slot_groups-1; n >= 0; n--)
+ size += sprintf(&buf[size], "%08X ",
+ readl(dd->port->s_active[n]));
+
+ size += sprintf(&buf[size], "]\n");
+ size += sprintf(&buf[size], "H/ Command Issue : [ 0x");
+
+ for (n = dd->slot_groups-1; n >= 0; n--)
+ size += sprintf(&buf[size], "%08X ",
+ readl(dd->port->cmd_issue[n]));
+
+ size += sprintf(&buf[size], "]\n");
+ size += sprintf(&buf[size], "H/ Completed : [ 0x");
+
+ for (n = dd->slot_groups-1; n >= 0; n--)
+ size += sprintf(&buf[size], "%08X ",
+ readl(dd->port->completed[n]));
+
+ size += sprintf(&buf[size], "]\n");
+ size += sprintf(&buf[size], "H/ PORT IRQ STAT : [ 0x%08X ]\n",
+ readl(dd->port->mmio + PORT_IRQ_STAT));
+ size += sprintf(&buf[size], "H/ HOST IRQ STAT : [ 0x%08X ]\n",
+ readl(dd->mmio + HOST_IRQ_STAT));
+ size += sprintf(&buf[size], "\n");
+
+ size += sprintf(&buf[size], "L/ Allocated : [ 0x");
+
+ for (n = dd->slot_groups-1; n >= 0; n--) {
+ if (sizeof(long) > sizeof(u32))
+ group_allocated =
+ dd->port->allocated[n/2] >> (32*(n&1));
+ else
+ group_allocated = dd->port->allocated[n];
+ size += sprintf(&buf[size], "%08X ", group_allocated);
+ }
+ size += sprintf(&buf[size], "]\n");
+
+ size += sprintf(&buf[size], "L/ Commands in Q : [ 0x");
+
+ for (n = dd->slot_groups-1; n >= 0; n--) {
+ if (sizeof(long) > sizeof(u32))
+ group_allocated =
+ dd->port->cmds_to_issue[n/2] >> (32*(n&1));
+ else
+ group_allocated = dd->port->cmds_to_issue[n];
+ size += sprintf(&buf[size], "%08X ", group_allocated);
+ }
+ size += sprintf(&buf[size], "]\n");
+
+ *offset = size <= len ? size : len;
+ size = copy_to_user(ubuf, buf, *offset);
+ if (size)
+ return -EFAULT;
+
+ return *offset;
}
-static DEVICE_ATTR(registers, S_IRUGO, mtip_hw_show_registers, NULL);
-static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL);
-static DEVICE_ATTR(flags, S_IRUGO, mtip_hw_show_flags, NULL);
+static ssize_t mtip_hw_read_flags(struct file *f, char __user *ubuf,
+ size_t len, loff_t *offset)
+{
+ struct driver_data *dd = (struct driver_data *)f->private_data;
+ char buf[MTIP_DFS_MAX_BUF_SIZE];
+ int size = *offset;
+
+ if (!len || size)
+ return 0;
+
+ if (size < 0)
+ return -EINVAL;
+
+ size += sprintf(&buf[size], "Flag-port : [ %08lX ]\n",
+ dd->port->flags);
+ size += sprintf(&buf[size], "Flag-dd : [ %08lX ]\n",
+ dd->dd_flag);
+
+ *offset = size <= len ? size : len;
+ size = copy_to_user(ubuf, buf, *offset);
+ if (size)
+ return -EFAULT;
+
+ return *offset;
+}
+
+static const struct file_operations mtip_regs_fops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = mtip_hw_read_registers,
+ .llseek = no_llseek,
+};
+
+static const struct file_operations mtip_flags_fops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = mtip_hw_read_flags,
+ .llseek = no_llseek,
+};
/*
* Create the sysfs related attributes.
@@ -2671,15 +2705,9 @@
if (!kobj || !dd)
return -EINVAL;
- if (sysfs_create_file(kobj, &dev_attr_registers.attr))
- dev_warn(&dd->pdev->dev,
- "Error creating 'registers' sysfs entry\n");
if (sysfs_create_file(kobj, &dev_attr_status.attr))
dev_warn(&dd->pdev->dev,
"Error creating 'status' sysfs entry\n");
- if (sysfs_create_file(kobj, &dev_attr_flags.attr))
- dev_warn(&dd->pdev->dev,
- "Error creating 'flags' sysfs entry\n");
return 0;
}
@@ -2698,13 +2726,39 @@
if (!kobj || !dd)
return -EINVAL;
- sysfs_remove_file(kobj, &dev_attr_registers.attr);
sysfs_remove_file(kobj, &dev_attr_status.attr);
- sysfs_remove_file(kobj, &dev_attr_flags.attr);
return 0;
}
+static int mtip_hw_debugfs_init(struct driver_data *dd)
+{
+ if (!dfs_parent)
+ return -1;
+
+ dd->dfs_node = debugfs_create_dir(dd->disk->disk_name, dfs_parent);
+ if (IS_ERR_OR_NULL(dd->dfs_node)) {
+ dev_warn(&dd->pdev->dev,
+ "Error creating node %s under debugfs\n",
+ dd->disk->disk_name);
+ dd->dfs_node = NULL;
+ return -1;
+ }
+
+ debugfs_create_file("flags", S_IRUGO, dd->dfs_node, dd,
+ &mtip_flags_fops);
+ debugfs_create_file("registers", S_IRUGO, dd->dfs_node, dd,
+ &mtip_regs_fops);
+
+ return 0;
+}
+
+static void mtip_hw_debugfs_exit(struct driver_data *dd)
+{
+ debugfs_remove_recursive(dd->dfs_node);
+}
+
+
/*
* Perform any init/resume time hardware setup
*
@@ -3730,6 +3784,7 @@
mtip_hw_sysfs_init(dd, kobj);
kobject_put(kobj);
}
+ mtip_hw_debugfs_init(dd);
if (dd->mtip_svc_handler) {
set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag);
@@ -3755,6 +3810,8 @@
return rv;
kthread_run_error:
+ mtip_hw_debugfs_exit(dd);
+
/* Delete our gendisk. This also removes the device from /dev */
del_gendisk(dd->disk);
@@ -3805,6 +3862,7 @@
kobject_put(kobj);
}
}
+ mtip_hw_debugfs_exit(dd);
/*
* Delete our gendisk structure. This also removes the device
@@ -4152,10 +4210,20 @@
}
mtip_major = error;
+ if (!dfs_parent) {
+ dfs_parent = debugfs_create_dir("rssd", NULL);
+ if (IS_ERR_OR_NULL(dfs_parent)) {
+ printk(KERN_WARNING "Error creating debugfs parent\n");
+ dfs_parent = NULL;
+ }
+ }
+
/* Register our PCI operations. */
error = pci_register_driver(&mtip_pci_driver);
- if (error)
+ if (error) {
+ debugfs_remove(dfs_parent);
unregister_blkdev(mtip_major, MTIP_DRV_NAME);
+ }
return error;
}
@@ -4172,6 +4240,8 @@
*/
static void __exit mtip_exit(void)
{
+ debugfs_remove_recursive(dfs_parent);
+
/* Release the allocated major block device number. */
unregister_blkdev(mtip_major, MTIP_DRV_NAME);
diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h
index b2c88da..f51fc23 100644
--- a/drivers/block/mtip32xx/mtip32xx.h
+++ b/drivers/block/mtip32xx/mtip32xx.h
@@ -26,7 +26,6 @@
#include <linux/ata.h>
#include <linux/interrupt.h>
#include <linux/genhd.h>
-#include <linux/version.h>
/* Offset of Subsystem Device ID in pci confoguration space */
#define PCI_SUBSYSTEM_DEVICEID 0x2E
@@ -111,6 +110,8 @@
#define dbg_printk(format, arg...)
#endif
+#define MTIP_DFS_MAX_BUF_SIZE 1024
+
#define __force_bit2int (unsigned int __force)
enum {
@@ -447,6 +448,8 @@
unsigned long dd_flag; /* NOTE: use atomic bit operations on this */
struct task_struct *mtip_svc_handler; /* task_struct of svc thd */
+
+ struct dentry *dfs_node;
};
#endif
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index 65665c9..8f428a8 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -499,7 +499,7 @@
/ sizeof (*ondisk))
return -EINVAL;
header->snapc = kmalloc(sizeof(struct ceph_snap_context) +
- snap_count * sizeof (*ondisk),
+ snap_count * sizeof(u64),
gfp_flags);
if (!header->snapc)
return -ENOMEM;
@@ -977,7 +977,7 @@
op = (void *)(replyhead + 1);
rc = le32_to_cpu(replyhead->result);
bytes = le64_to_cpu(op->extent.length);
- read_op = (le32_to_cpu(op->op) == CEPH_OSD_OP_READ);
+ read_op = (le16_to_cpu(op->op) == CEPH_OSD_OP_READ);
dout("rbd_req_cb bytes=%lld readop=%d rc=%d\n", bytes, read_op, rc);
diff --git a/drivers/block/umem.c b/drivers/block/umem.c
index aa27120..9a72277 100644
--- a/drivers/block/umem.c
+++ b/drivers/block/umem.c
@@ -513,6 +513,44 @@
}
}
+struct mm_plug_cb {
+ struct blk_plug_cb cb;
+ struct cardinfo *card;
+};
+
+static void mm_unplug(struct blk_plug_cb *cb)
+{
+ struct mm_plug_cb *mmcb = container_of(cb, struct mm_plug_cb, cb);
+
+ spin_lock_irq(&mmcb->card->lock);
+ activate(mmcb->card);
+ spin_unlock_irq(&mmcb->card->lock);
+ kfree(mmcb);
+}
+
+static int mm_check_plugged(struct cardinfo *card)
+{
+ struct blk_plug *plug = current->plug;
+ struct mm_plug_cb *mmcb;
+
+ if (!plug)
+ return 0;
+
+ list_for_each_entry(mmcb, &plug->cb_list, cb.list) {
+ if (mmcb->cb.callback == mm_unplug && mmcb->card == card)
+ return 1;
+ }
+ /* Not currently on the callback list */
+ mmcb = kmalloc(sizeof(*mmcb), GFP_ATOMIC);
+ if (!mmcb)
+ return 0;
+
+ mmcb->card = card;
+ mmcb->cb.callback = mm_unplug;
+ list_add(&mmcb->cb.list, &plug->cb_list);
+ return 1;
+}
+
static void mm_make_request(struct request_queue *q, struct bio *bio)
{
struct cardinfo *card = q->queuedata;
@@ -523,6 +561,8 @@
*card->biotail = bio;
bio->bi_next = NULL;
card->biotail = &bio->bi_next;
+ if (bio->bi_rw & REQ_SYNC || !mm_check_plugged(card))
+ activate(card);
spin_unlock_irq(&card->lock);
return;
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index 773cf27..9ad3b5e 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -257,6 +257,7 @@
break;
case BLKIF_OP_DISCARD:
dst->u.discard.flag = src->u.discard.flag;
+ dst->u.discard.id = src->u.discard.id;
dst->u.discard.sector_number = src->u.discard.sector_number;
dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
break;
@@ -287,6 +288,7 @@
break;
case BLKIF_OP_DISCARD:
dst->u.discard.flag = src->u.discard.flag;
+ dst->u.discard.id = src->u.discard.id;
dst->u.discard.sector_number = src->u.discard.sector_number;
dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
break;
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 60eed4b..e4fb337 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -141,14 +141,36 @@
return free;
}
-static void add_id_to_freelist(struct blkfront_info *info,
+static int add_id_to_freelist(struct blkfront_info *info,
unsigned long id)
{
+ if (info->shadow[id].req.u.rw.id != id)
+ return -EINVAL;
+ if (info->shadow[id].request == NULL)
+ return -EINVAL;
info->shadow[id].req.u.rw.id = info->shadow_free;
info->shadow[id].request = NULL;
info->shadow_free = id;
+ return 0;
}
+static const char *op_name(int op)
+{
+ static const char *const names[] = {
+ [BLKIF_OP_READ] = "read",
+ [BLKIF_OP_WRITE] = "write",
+ [BLKIF_OP_WRITE_BARRIER] = "barrier",
+ [BLKIF_OP_FLUSH_DISKCACHE] = "flush",
+ [BLKIF_OP_DISCARD] = "discard" };
+
+ if (op < 0 || op >= ARRAY_SIZE(names))
+ return "unknown";
+
+ if (!names[op])
+ return "reserved";
+
+ return names[op];
+}
static int xlbd_reserve_minors(unsigned int minor, unsigned int nr)
{
unsigned int end = minor + nr;
@@ -746,20 +768,36 @@
bret = RING_GET_RESPONSE(&info->ring, i);
id = bret->id;
+ /*
+ * The backend has messed up and given us an id that we would
+ * never have given to it (we stamp it up to BLK_RING_SIZE -
+ * look in get_id_from_freelist.
+ */
+ if (id >= BLK_RING_SIZE) {
+ WARN(1, "%s: response to %s has incorrect id (%ld)\n",
+ info->gd->disk_name, op_name(bret->operation), id);
+ /* We can't safely get the 'struct request' as
+ * the id is busted. */
+ continue;
+ }
req = info->shadow[id].request;
if (bret->operation != BLKIF_OP_DISCARD)
blkif_completion(&info->shadow[id]);
- add_id_to_freelist(info, id);
+ if (add_id_to_freelist(info, id)) {
+ WARN(1, "%s: response to %s (id %ld) couldn't be recycled!\n",
+ info->gd->disk_name, op_name(bret->operation), id);
+ continue;
+ }
error = (bret->status == BLKIF_RSP_OKAY) ? 0 : -EIO;
switch (bret->operation) {
case BLKIF_OP_DISCARD:
if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
struct request_queue *rq = info->rq;
- printk(KERN_WARNING "blkfront: %s: discard op failed\n",
- info->gd->disk_name);
+ printk(KERN_WARNING "blkfront: %s: %s op failed\n",
+ info->gd->disk_name, op_name(bret->operation));
error = -EOPNOTSUPP;
info->feature_discard = 0;
info->feature_secdiscard = 0;
@@ -771,18 +809,14 @@
case BLKIF_OP_FLUSH_DISKCACHE:
case BLKIF_OP_WRITE_BARRIER:
if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
- printk(KERN_WARNING "blkfront: %s: write %s op failed\n",
- info->flush_op == BLKIF_OP_WRITE_BARRIER ?
- "barrier" : "flush disk cache",
- info->gd->disk_name);
+ printk(KERN_WARNING "blkfront: %s: %s op failed\n",
+ info->gd->disk_name, op_name(bret->operation));
error = -EOPNOTSUPP;
}
if (unlikely(bret->status == BLKIF_RSP_ERROR &&
info->shadow[id].req.u.rw.nr_segments == 0)) {
- printk(KERN_WARNING "blkfront: %s: empty write %s op failed\n",
- info->flush_op == BLKIF_OP_WRITE_BARRIER ?
- "barrier" : "flush disk cache",
- info->gd->disk_name);
+ printk(KERN_WARNING "blkfront: %s: empty %s op failed\n",
+ info->gd->disk_name, op_name(bret->operation));
error = -EOPNOTSUPP;
}
if (unlikely(error)) {
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index ad591bd..10308cd 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -63,6 +63,7 @@
/* Atheros AR3011 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x3002) },
+ { USB_DEVICE(0x0CF3, 0xE019) },
{ USB_DEVICE(0x13d3, 0x3304) },
{ USB_DEVICE(0x0930, 0x0215) },
{ USB_DEVICE(0x0489, 0xE03D) },
@@ -77,6 +78,7 @@
{ USB_DEVICE(0x04CA, 0x3005) },
{ USB_DEVICE(0x13d3, 0x3362) },
{ USB_DEVICE(0x0CF3, 0xE004) },
+ { USB_DEVICE(0x0930, 0x0219) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -101,6 +103,7 @@
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
index 94f2d65..27068d1 100644
--- a/drivers/bluetooth/btmrvl_drv.h
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -136,7 +136,7 @@
void btmrvl_interrupt(struct btmrvl_private *priv);
-void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb);
+bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb);
int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb);
int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd);
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index 681ca9d..dc304de 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -44,23 +44,33 @@
}
EXPORT_SYMBOL_GPL(btmrvl_interrupt);
-void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
+bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
{
struct hci_event_hdr *hdr = (void *) skb->data;
struct hci_ev_cmd_complete *ec;
- u16 opcode, ocf;
+ u16 opcode, ocf, ogf;
if (hdr->evt == HCI_EV_CMD_COMPLETE) {
ec = (void *) (skb->data + HCI_EVENT_HDR_SIZE);
opcode = __le16_to_cpu(ec->opcode);
ocf = hci_opcode_ocf(opcode);
+ ogf = hci_opcode_ogf(opcode);
+
if (ocf == BT_CMD_MODULE_CFG_REQ &&
priv->btmrvl_dev.sendcmdflag) {
priv->btmrvl_dev.sendcmdflag = false;
priv->adapter->cmd_complete = true;
wake_up_interruptible(&priv->adapter->cmd_wait_q);
}
+
+ if (ogf == OGF) {
+ BT_DBG("vendor event skipped: ogf 0x%4.4x", ogf);
+ kfree_skb(skb);
+ return false;
+ }
}
+
+ return true;
}
EXPORT_SYMBOL_GPL(btmrvl_check_evtpkt);
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index a853244..0cd61d9 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -562,10 +562,12 @@
skb_put(skb, buf_len);
skb_pull(skb, SDIO_HEADER_LEN);
- if (type == HCI_EVENT_PKT)
- btmrvl_check_evtpkt(priv, skb);
+ if (type == HCI_EVENT_PKT) {
+ if (btmrvl_check_evtpkt(priv, skb))
+ hci_recv_frame(skb);
+ } else
+ hci_recv_frame(skb);
- hci_recv_frame(skb);
hdev->stat.byte_rx += buf_len;
break;
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index c9463af..83ebb24 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -125,6 +125,7 @@
/* Atheros 3011 with sflash firmware */
{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+ { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
@@ -139,6 +140,7 @@
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
diff --git a/drivers/char/hw_random/atmel-rng.c b/drivers/char/hw_random/atmel-rng.c
index f518b99..731c904 100644
--- a/drivers/char/hw_random/atmel-rng.c
+++ b/drivers/char/hw_random/atmel-rng.c
@@ -34,8 +34,15 @@
u32 *data = buf;
/* data ready? */
- if (readl(trng->base + TRNG_ODATA) & 1) {
+ if (readl(trng->base + TRNG_ISR) & 1) {
*data = readl(trng->base + TRNG_ODATA);
+ /*
+ ensure data ready is only set again AFTER the next data
+ word is ready in case it got set between checking ISR
+ and reading ODATA, so we don't risk re-reading the
+ same word
+ */
+ readl(trng->base + TRNG_ISR);
return 4;
} else
return 0;
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index 1412565..d706bd0e 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -162,22 +162,24 @@
#ifdef CONFIG_PM
-static int omap_rng_suspend(struct platform_device *pdev, pm_message_t message)
+static int omap_rng_suspend(struct device *dev)
{
omap_rng_write_reg(RNG_MASK_REG, 0x0);
return 0;
}
-static int omap_rng_resume(struct platform_device *pdev)
+static int omap_rng_resume(struct device *dev)
{
omap_rng_write_reg(RNG_MASK_REG, 0x1);
return 0;
}
+static SIMPLE_DEV_PM_OPS(omap_rng_pm, omap_rng_suspend, omap_rng_resume);
+#define OMAP_RNG_PM (&omap_rng_pm)
+
#else
-#define omap_rng_suspend NULL
-#define omap_rng_resume NULL
+#define OMAP_RNG_PM NULL
#endif
@@ -188,11 +190,10 @@
.driver = {
.name = "omap_rng",
.owner = THIS_MODULE,
+ .pm = OMAP_RNG_PM,
},
.probe = omap_rng_probe,
.remove = __exit_p(omap_rng_remove),
- .suspend = omap_rng_suspend,
- .resume = omap_rng_resume
};
static int __init omap_rng_init(void)
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 1e638ff..83f85cf 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2503,18 +2503,6 @@
cleanup_one_si(info);
}
-#ifdef CONFIG_PM
-static int ipmi_pci_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- return 0;
-}
-
-static int ipmi_pci_resume(struct pci_dev *pdev)
-{
- return 0;
-}
-#endif
-
static struct pci_device_id ipmi_pci_devices[] = {
{ PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) },
{ PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) },
@@ -2527,10 +2515,6 @@
.id_table = ipmi_pci_devices,
.probe = ipmi_pci_probe,
.remove = __devexit_p(ipmi_pci_remove),
-#ifdef CONFIG_PM
- .suspend = ipmi_pci_suspend,
- .resume = ipmi_pci_resume,
-#endif
};
#endif /* CONFIG_PCI */
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 67c3371..e5eedfa 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -27,14 +27,16 @@
#include <linux/splice.h>
#include <linux/pfn.h>
#include <linux/export.h>
+#include <linux/io.h>
#include <asm/uaccess.h>
-#include <asm/io.h>
#ifdef CONFIG_IA64
# include <linux/efi.h>
#endif
+#define DEVPORT_MINOR 4
+
static inline unsigned long size_inside_page(unsigned long start,
unsigned long size)
{
@@ -894,6 +896,13 @@
for (minor = 1; minor < ARRAY_SIZE(devlist); minor++) {
if (!devlist[minor].name)
continue;
+
+ /*
+ * Create /dev/port?
+ */
+ if ((minor == DEVPORT_MINOR) && !arch_has_dev_port())
+ continue;
+
device_create(mem_class, NULL, MKDEV(MEM_MAJOR, minor),
NULL, devlist[minor].name);
}
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index 45713f0..f877805 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -1459,7 +1459,7 @@
#ifdef CONFIG_PM
static int old_camera_power;
-static int sonypi_suspend(struct platform_device *dev, pm_message_t state)
+static int sonypi_suspend(struct device *dev)
{
old_camera_power = sonypi_device.camera_power;
sonypi_disable();
@@ -1467,14 +1467,16 @@
return 0;
}
-static int sonypi_resume(struct platform_device *dev)
+static int sonypi_resume(struct device *dev)
{
sonypi_enable(old_camera_power);
return 0;
}
+
+static SIMPLE_DEV_PM_OPS(sonypi_pm, sonypi_suspend, sonypi_resume);
+#define SONYPI_PM (&sonypi_pm)
#else
-#define sonypi_suspend NULL
-#define sonypi_resume NULL
+#define SONYPI_PM NULL
#endif
static void sonypi_shutdown(struct platform_device *dev)
@@ -1486,12 +1488,11 @@
.driver = {
.name = "sonypi",
.owner = THIS_MODULE,
+ .pm = SONYPI_PM,
},
.probe = sonypi_probe,
.remove = __devexit_p(sonypi_remove),
.shutdown = sonypi_shutdown,
- .suspend = sonypi_suspend,
- .resume = sonypi_resume,
};
static struct platform_device *sonypi_platform_device;
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index ad7c732..817f0ee 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -827,10 +827,10 @@
int tpm_do_selftest(struct tpm_chip *chip)
{
int rc;
- u8 digest[TPM_DIGEST_SIZE];
unsigned int loops;
unsigned int delay_msec = 1000;
unsigned long duration;
+ struct tpm_cmd_t cmd;
duration = tpm_calc_ordinal_duration(chip,
TPM_ORD_CONTINUE_SELFTEST);
@@ -845,7 +845,15 @@
return rc;
do {
- rc = __tpm_pcr_read(chip, 0, digest);
+ /* Attempt to read a PCR value */
+ cmd.header.in = pcrread_header;
+ cmd.params.pcrread_in.pcr_idx = cpu_to_be32(0);
+ rc = tpm_transmit(chip, (u8 *) &cmd, READ_PCR_RESULT_SIZE);
+
+ if (rc < TPM_HEADER_SIZE)
+ return -EFAULT;
+
+ rc = be32_to_cpu(cmd.header.out.return_code);
if (rc == TPM_ERR_DISABLED || rc == TPM_ERR_DEACTIVATED) {
dev_info(chip->dev,
"TPM is disabled/deactivated (0x%X)\n", rc);
@@ -1274,7 +1282,7 @@
* We are about to suspend. Save the TPM state
* so that it can be restored.
*/
-int tpm_pm_suspend(struct device *dev, pm_message_t pm_state)
+int tpm_pm_suspend(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
struct tpm_cmd_t cmd;
@@ -1322,6 +1330,9 @@
void tpm_dev_vendor_release(struct tpm_chip *chip)
{
+ if (!chip)
+ return;
+
if (chip->vendor.release)
chip->vendor.release(chip->dev);
@@ -1339,6 +1350,9 @@
{
struct tpm_chip *chip = dev_get_drvdata(dev);
+ if (!chip)
+ return;
+
tpm_dev_vendor_release(chip);
chip->release(dev);
@@ -1405,15 +1419,12 @@
"unable to misc_register %s, minor %d\n",
chip->vendor.miscdev.name,
chip->vendor.miscdev.minor);
- put_device(chip->dev);
- return NULL;
+ goto put_device;
}
if (sysfs_create_group(&dev->kobj, chip->vendor.attr_group)) {
misc_deregister(&chip->vendor.miscdev);
- put_device(chip->dev);
-
- return NULL;
+ goto put_device;
}
chip->bios_dir = tpm_bios_log_setup(devname);
@@ -1425,6 +1436,8 @@
return chip;
+put_device:
+ put_device(chip->dev);
out_free:
kfree(chip);
kfree(devname);
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index b1c5280..917f727 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -299,7 +299,7 @@
loff_t *);
extern ssize_t tpm_read(struct file *, char __user *, size_t, loff_t *);
extern void tpm_remove_hardware(struct device *);
-extern int tpm_pm_suspend(struct device *, pm_message_t);
+extern int tpm_pm_suspend(struct device *);
extern int tpm_pm_resume(struct device *);
extern int wait_for_tpm_stat(struct tpm_chip *, u8, unsigned long,
wait_queue_head_t *);
diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c
index c64a1bc..678d570 100644
--- a/drivers/char/tpm/tpm_atmel.c
+++ b/drivers/char/tpm/tpm_atmel.c
@@ -168,22 +168,14 @@
}
}
-static int tpm_atml_suspend(struct platform_device *dev, pm_message_t msg)
-{
- return tpm_pm_suspend(&dev->dev, msg);
-}
+static SIMPLE_DEV_PM_OPS(tpm_atml_pm, tpm_pm_suspend, tpm_pm_resume);
-static int tpm_atml_resume(struct platform_device *dev)
-{
- return tpm_pm_resume(&dev->dev);
-}
static struct platform_driver atml_drv = {
.driver = {
.name = "tpm_atmel",
.owner = THIS_MODULE,
+ .pm = &tpm_atml_pm,
},
- .suspend = tpm_atml_suspend,
- .resume = tpm_atml_resume,
};
static int __init init_atmel(void)
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
index 76da32e..3251a44 100644
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -4,8 +4,8 @@
* SLD 9630 TT 1.1 and SLB 9635 TT 1.2 Trusted Platform Module
* Specifications at www.trustedcomputinggroup.org
*
- * Copyright (C) 2005, Marcel Selhorst <m.selhorst@sirrix.com>
- * Sirrix AG - security technologies, http://www.sirrix.com and
+ * Copyright (C) 2005, Marcel Selhorst <tpmdd@selhorst.net>
+ * Sirrix AG - security technologies <tpmdd@sirrix.com> and
* Applied Data Security Group, Ruhr-University Bochum, Germany
* Project-Homepage: http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/
*
@@ -671,7 +671,7 @@
module_init(init_inf);
module_exit(cleanup_inf);
-MODULE_AUTHOR("Marcel Selhorst <m.selhorst@sirrix.com>");
+MODULE_AUTHOR("Marcel Selhorst <tpmdd@sirrix.com>");
MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2");
MODULE_VERSION("1.9.2");
MODULE_LICENSE("GPL");
diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c
index 4d24648..640c9a4 100644
--- a/drivers/char/tpm/tpm_nsc.c
+++ b/drivers/char/tpm/tpm_nsc.c
@@ -274,22 +274,13 @@
}
}
-static int tpm_nsc_suspend(struct platform_device *dev, pm_message_t msg)
-{
- return tpm_pm_suspend(&dev->dev, msg);
-}
-
-static int tpm_nsc_resume(struct platform_device *dev)
-{
- return tpm_pm_resume(&dev->dev);
-}
+static SIMPLE_DEV_PM_OPS(tpm_nsc_pm, tpm_pm_suspend, tpm_pm_resume);
static struct platform_driver nsc_drv = {
- .suspend = tpm_nsc_suspend,
- .resume = tpm_nsc_resume,
.driver = {
.name = "tpm_nsc",
.owner = THIS_MODULE,
+ .pm = &tpm_nsc_pm,
},
};
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index d2a70ca..89682fa 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -750,7 +750,7 @@
static int tpm_tis_pnp_suspend(struct pnp_dev *dev, pm_message_t msg)
{
- return tpm_pm_suspend(&dev->dev, msg);
+ return tpm_pm_suspend(&dev->dev);
}
static int tpm_tis_pnp_resume(struct pnp_dev *dev)
@@ -806,27 +806,25 @@
sizeof(tpm_pnp_tbl[TIS_HID_USR_IDX].id), 0444);
MODULE_PARM_DESC(hid, "Set additional specific HID for this driver to probe");
#endif
-static int tpm_tis_suspend(struct platform_device *dev, pm_message_t msg)
-{
- return tpm_pm_suspend(&dev->dev, msg);
-}
-static int tpm_tis_resume(struct platform_device *dev)
+static int tpm_tis_resume(struct device *dev)
{
- struct tpm_chip *chip = dev_get_drvdata(&dev->dev);
+ struct tpm_chip *chip = dev_get_drvdata(dev);
if (chip->vendor.irq)
tpm_tis_reenable_interrupts(chip);
- return tpm_pm_resume(&dev->dev);
+ return tpm_pm_resume(dev);
}
+
+static SIMPLE_DEV_PM_OPS(tpm_tis_pm, tpm_pm_suspend, tpm_tis_resume);
+
static struct platform_driver tis_drv = {
.driver = {
.name = "tpm_tis",
.owner = THIS_MODULE,
+ .pm = &tpm_tis_pm,
},
- .suspend = tpm_tis_suspend,
- .resume = tpm_tis_resume,
};
static struct platform_device *pdev;
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index b9a5158..3669761 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -3,5 +3,7 @@
obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \
clk-mux.o clk-divider.o clk-fixed-factor.o
# SoCs specific
+obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
obj-$(CONFIG_ARCH_MXS) += mxs/
+obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/
obj-$(CONFIG_PLAT_SPEAR) += spear/
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
new file mode 100644
index 0000000..517a8ff
--- /dev/null
+++ b/drivers/clk/clk-nomadik.c
@@ -0,0 +1,47 @@
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+
+/*
+ * The Nomadik clock tree is described in the STN8815A12 DB V4.2
+ * reference manual for the chip, page 94 ff.
+ */
+
+void __init nomadik_clk_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+ clk_register_clkdev(clk, "apb_pclk", NULL);
+ clk_register_clkdev(clk, NULL, "gpio.0");
+ clk_register_clkdev(clk, NULL, "gpio.1");
+ clk_register_clkdev(clk, NULL, "gpio.2");
+ clk_register_clkdev(clk, NULL, "gpio.3");
+ clk_register_clkdev(clk, NULL, "rng");
+
+ /*
+ * The 2.4 MHz TIMCLK reference clock is active at boot time, this is
+ * actually the MXTALCLK @19.2 MHz divided by 8. This clock is used
+ * by the timers and watchdog. See page 105 ff.
+ */
+ clk = clk_register_fixed_rate(NULL, "TIMCLK", NULL, CLK_IS_ROOT,
+ 2400000);
+ clk_register_clkdev(clk, NULL, "mtu0");
+ clk_register_clkdev(clk, NULL, "mtu1");
+
+ /*
+ * At boot time, PLL2 is set to generate a set of fixed clocks,
+ * one of them is CLK48, the 48 MHz clock, routed to the UART, MMC/SD
+ * I2C, IrDA, USB and SSP blocks.
+ */
+ clk = clk_register_fixed_rate(NULL, "CLK48", NULL, CLK_IS_ROOT,
+ 48000000);
+ clk_register_clkdev(clk, NULL, "uart0");
+ clk_register_clkdev(clk, NULL, "uart1");
+ clk_register_clkdev(clk, NULL, "mmci");
+ clk_register_clkdev(clk, NULL, "ssp");
+ clk_register_clkdev(clk, NULL, "nmk-i2c.0");
+ clk_register_clkdev(clk, NULL, "nmk-i2c.1");
+}
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 687b00d..9a1eb0c 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -850,18 +850,21 @@
{
struct clk *child;
unsigned long old_rate;
+ unsigned long best_parent_rate = 0;
struct hlist_node *tmp;
old_rate = clk->rate;
+ if (clk->parent)
+ best_parent_rate = clk->parent->rate;
+
if (clk->ops->set_rate)
- clk->ops->set_rate(clk->hw, clk->new_rate, clk->parent->rate);
+ clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate);
if (clk->ops->recalc_rate)
- clk->rate = clk->ops->recalc_rate(clk->hw,
- clk->parent->rate);
+ clk->rate = clk->ops->recalc_rate(clk->hw, best_parent_rate);
else
- clk->rate = clk->parent->rate;
+ clk->rate = best_parent_rate;
if (clk->notifier_count && old_rate != clk->rate)
__clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate);
@@ -999,7 +1002,7 @@
if (!clk->parents)
clk->parents =
- kmalloc((sizeof(struct clk*) * clk->num_parents),
+ kzalloc((sizeof(struct clk*) * clk->num_parents),
GFP_KERNEL);
if (!clk->parents)
@@ -1064,21 +1067,24 @@
old_parent = clk->parent;
- /* find index of new parent clock using cached parent ptrs */
- for (i = 0; i < clk->num_parents; i++)
- if (clk->parents[i] == parent)
- break;
+ if (!clk->parents)
+ clk->parents = kzalloc((sizeof(struct clk*) * clk->num_parents),
+ GFP_KERNEL);
/*
- * find index of new parent clock using string name comparison
- * also try to cache the parent to avoid future calls to __clk_lookup
+ * find index of new parent clock using cached parent ptrs,
+ * or if not yet cached, use string name comparison and cache
+ * them now to avoid future calls to __clk_lookup.
*/
- if (i == clk->num_parents)
- for (i = 0; i < clk->num_parents; i++)
- if (!strcmp(clk->parent_names[i], parent->name)) {
+ for (i = 0; i < clk->num_parents; i++) {
+ if (clk->parents && clk->parents[i] == parent)
+ break;
+ else if (!strcmp(clk->parent_names[i], parent->name)) {
+ if (clk->parents)
clk->parents[i] = __clk_lookup(parent->name);
- break;
- }
+ break;
+ }
+ }
if (i == clk->num_parents) {
pr_debug("%s: clock %s is not a possible parent of clock %s\n",
diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c
index f7be225..db2391c 100644
--- a/drivers/clk/mxs/clk-imx23.c
+++ b/drivers/clk/mxs/clk-imx23.c
@@ -71,7 +71,7 @@
__mxs_setl(30 << BP_FRAC_IOFRAC, FRAC);
}
-static struct clk_lookup uart_lookups[] __initdata = {
+static struct clk_lookup uart_lookups[] = {
{ .dev_id = "duart", },
{ .dev_id = "mxs-auart.0", },
{ .dev_id = "mxs-auart.1", },
@@ -80,31 +80,31 @@
{ .dev_id = "80070000.serial", },
};
-static struct clk_lookup hbus_lookups[] __initdata = {
+static struct clk_lookup hbus_lookups[] = {
{ .dev_id = "imx23-dma-apbh", },
{ .dev_id = "80004000.dma-apbh", },
};
-static struct clk_lookup xbus_lookups[] __initdata = {
+static struct clk_lookup xbus_lookups[] = {
{ .dev_id = "duart", .con_id = "apb_pclk"},
{ .dev_id = "80070000.serial", .con_id = "apb_pclk"},
{ .dev_id = "imx23-dma-apbx", },
{ .dev_id = "80024000.dma-apbx", },
};
-static struct clk_lookup ssp_lookups[] __initdata = {
+static struct clk_lookup ssp_lookups[] = {
{ .dev_id = "imx23-mmc.0", },
{ .dev_id = "imx23-mmc.1", },
{ .dev_id = "80010000.ssp", },
{ .dev_id = "80034000.ssp", },
};
-static struct clk_lookup lcdif_lookups[] __initdata = {
+static struct clk_lookup lcdif_lookups[] = {
{ .dev_id = "imx23-fb", },
{ .dev_id = "80030000.lcdif", },
};
-static struct clk_lookup gpmi_lookups[] __initdata = {
+static struct clk_lookup gpmi_lookups[] = {
{ .dev_id = "imx23-gpmi-nand", },
{ .dev_id = "8000c000.gpmi", },
};
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
index 2826a26..7fad6c8 100644
--- a/drivers/clk/mxs/clk-imx28.c
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -120,7 +120,7 @@
writel_relaxed(val, FRAC0);
}
-static struct clk_lookup uart_lookups[] __initdata = {
+static struct clk_lookup uart_lookups[] = {
{ .dev_id = "duart", },
{ .dev_id = "mxs-auart.0", },
{ .dev_id = "mxs-auart.1", },
@@ -135,71 +135,71 @@
{ .dev_id = "80074000.serial", },
};
-static struct clk_lookup hbus_lookups[] __initdata = {
+static struct clk_lookup hbus_lookups[] = {
{ .dev_id = "imx28-dma-apbh", },
{ .dev_id = "80004000.dma-apbh", },
};
-static struct clk_lookup xbus_lookups[] __initdata = {
+static struct clk_lookup xbus_lookups[] = {
{ .dev_id = "duart", .con_id = "apb_pclk"},
{ .dev_id = "80074000.serial", .con_id = "apb_pclk"},
{ .dev_id = "imx28-dma-apbx", },
{ .dev_id = "80024000.dma-apbx", },
};
-static struct clk_lookup ssp0_lookups[] __initdata = {
+static struct clk_lookup ssp0_lookups[] = {
{ .dev_id = "imx28-mmc.0", },
{ .dev_id = "80010000.ssp", },
};
-static struct clk_lookup ssp1_lookups[] __initdata = {
+static struct clk_lookup ssp1_lookups[] = {
{ .dev_id = "imx28-mmc.1", },
{ .dev_id = "80012000.ssp", },
};
-static struct clk_lookup ssp2_lookups[] __initdata = {
+static struct clk_lookup ssp2_lookups[] = {
{ .dev_id = "imx28-mmc.2", },
{ .dev_id = "80014000.ssp", },
};
-static struct clk_lookup ssp3_lookups[] __initdata = {
+static struct clk_lookup ssp3_lookups[] = {
{ .dev_id = "imx28-mmc.3", },
{ .dev_id = "80016000.ssp", },
};
-static struct clk_lookup lcdif_lookups[] __initdata = {
+static struct clk_lookup lcdif_lookups[] = {
{ .dev_id = "imx28-fb", },
{ .dev_id = "80030000.lcdif", },
};
-static struct clk_lookup gpmi_lookups[] __initdata = {
+static struct clk_lookup gpmi_lookups[] = {
{ .dev_id = "imx28-gpmi-nand", },
{ .dev_id = "8000c000.gpmi", },
};
-static struct clk_lookup fec_lookups[] __initdata = {
+static struct clk_lookup fec_lookups[] = {
{ .dev_id = "imx28-fec.0", },
{ .dev_id = "imx28-fec.1", },
{ .dev_id = "800f0000.ethernet", },
{ .dev_id = "800f4000.ethernet", },
};
-static struct clk_lookup can0_lookups[] __initdata = {
+static struct clk_lookup can0_lookups[] = {
{ .dev_id = "flexcan.0", },
{ .dev_id = "80032000.can", },
};
-static struct clk_lookup can1_lookups[] __initdata = {
+static struct clk_lookup can1_lookups[] = {
{ .dev_id = "flexcan.1", },
{ .dev_id = "80034000.can", },
};
-static struct clk_lookup saif0_lookups[] __initdata = {
+static struct clk_lookup saif0_lookups[] = {
{ .dev_id = "mxs-saif.0", },
{ .dev_id = "80042000.saif", },
};
-static struct clk_lookup saif1_lookups[] __initdata = {
+static struct clk_lookup saif1_lookups[] = {
{ .dev_id = "mxs-saif.1", },
{ .dev_id = "80046000.saif", },
};
@@ -245,8 +245,8 @@
clks[pll2] = mxs_clk_pll("pll2", "ref_xtal", PLL2CTRL0, 23, 50000000);
clks[ref_cpu] = mxs_clk_ref("ref_cpu", "pll0", FRAC0, 0);
clks[ref_emi] = mxs_clk_ref("ref_emi", "pll0", FRAC0, 1);
- clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 2);
- clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 3);
+ clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 2);
+ clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 3);
clks[ref_pix] = mxs_clk_ref("ref_pix", "pll0", FRAC1, 0);
clks[ref_hsadc] = mxs_clk_ref("ref_hsadc", "pll0", FRAC1, 1);
clks[ref_gpmi] = mxs_clk_ref("ref_gpmi", "pll0", FRAC1, 2);
diff --git a/drivers/clk/socfpga/Makefile b/drivers/clk/socfpga/Makefile
new file mode 100644
index 0000000..0303c0b
--- /dev/null
+++ b/drivers/clk/socfpga/Makefile
@@ -0,0 +1 @@
+obj-y += clk.o
diff --git a/drivers/clk/socfpga/clk.c b/drivers/clk/socfpga/clk.c
new file mode 100644
index 0000000..2c855a6
--- /dev/null
+++ b/drivers/clk/socfpga/clk.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+
+#define SOCFPGA_OSC1_CLK 10000000
+#define SOCFPGA_MPU_CLK 800000000
+#define SOCFPGA_MAIN_QSPI_CLK 432000000
+#define SOCFPGA_MAIN_NAND_SDMMC_CLK 250000000
+#define SOCFPGA_S2F_USR_CLK 125000000
+
+void __init socfpga_init_clocks(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_fixed_rate(NULL, "osc1_clk", NULL, CLK_IS_ROOT, SOCFPGA_OSC1_CLK);
+ clk_register_clkdev(clk, "osc1_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "mpu_clk", NULL, CLK_IS_ROOT, SOCFPGA_MPU_CLK);
+ clk_register_clkdev(clk, "mpu_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "main_clk", NULL, CLK_IS_ROOT, SOCFPGA_MPU_CLK/2);
+ clk_register_clkdev(clk, "main_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "dbg_base_clk", NULL, CLK_IS_ROOT, SOCFPGA_MPU_CLK/2);
+ clk_register_clkdev(clk, "dbg_base_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "main_qspi_clk", NULL, CLK_IS_ROOT, SOCFPGA_MAIN_QSPI_CLK);
+ clk_register_clkdev(clk, "main_qspi_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "main_nand_sdmmc_clk", NULL, CLK_IS_ROOT, SOCFPGA_MAIN_NAND_SDMMC_CLK);
+ clk_register_clkdev(clk, "main_nand_sdmmc_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "s2f_usr_clk", NULL, CLK_IS_ROOT, SOCFPGA_S2F_USR_CLK);
+ clk_register_clkdev(clk, "s2f_usr_clk", NULL);
+}
diff --git a/drivers/clk/spear/clk-aux-synth.c b/drivers/clk/spear/clk-aux-synth.c
index af34074..6756e7c 100644
--- a/drivers/clk/spear/clk-aux-synth.c
+++ b/drivers/clk/spear/clk-aux-synth.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/clk-frac-synth.c b/drivers/clk/spear/clk-frac-synth.c
index 4dbdb3f..958aa3a 100644
--- a/drivers/clk/spear/clk-frac-synth.c
+++ b/drivers/clk/spear/clk-frac-synth.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/clk-gpt-synth.c b/drivers/clk/spear/clk-gpt-synth.c
index b471c97..1afc18c 100644
--- a/drivers/clk/spear/clk-gpt-synth.c
+++ b/drivers/clk/spear/clk-gpt-synth.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/clk-vco-pll.c b/drivers/clk/spear/clk-vco-pll.c
index dcd4bdf..5f1b6ba 100644
--- a/drivers/clk/spear/clk-vco-pll.c
+++ b/drivers/clk/spear/clk-vco-pll.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/clk.c b/drivers/clk/spear/clk.c
index 376d4e5..7cd6378 100644
--- a/drivers/clk/spear/clk.c
+++ b/drivers/clk/spear/clk.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h
index 3321c46..9317376 100644
--- a/drivers/clk/spear/clk.h
+++ b/drivers/clk/spear/clk.h
@@ -2,7 +2,7 @@
* Clock framework definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c
index 42b68df..0fcec2a 100644
--- a/drivers/clk/spear/spear1310_clock.c
+++ b/drivers/clk/spear/spear1310_clock.c
@@ -4,7 +4,7 @@
* SPEAr1310 machine clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
@@ -345,31 +345,30 @@
/* clock parents */
static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", };
static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", };
-static const char *uart0_parents[] = { "pll5_clk", "uart_synth_gate_clk", };
-static const char *c3_parents[] = { "pll5_clk", "c3_synth_gate_clk", };
-static const char *gmac_phy_input_parents[] = { "gmii_125m_pad_clk", "pll2_clk",
+static const char *uart0_parents[] = { "pll5_clk", "uart_syn_gclk", };
+static const char *c3_parents[] = { "pll5_clk", "c3_syn_gclk", };
+static const char *gmac_phy_input_parents[] = { "gmii_pad_clk", "pll2_clk",
"osc_25m_clk", };
-static const char *gmac_phy_parents[] = { "gmac_phy_input_mux_clk",
- "gmac_phy_synth_gate_clk", };
+static const char *gmac_phy_parents[] = { "phy_input_mclk", "phy_syn_gclk", };
static const char *clcd_synth_parents[] = { "vco1div4_clk", "pll2_clk", };
-static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_synth_clk", };
+static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_syn_clk", };
static const char *i2s_src_parents[] = { "vco1div2_clk", "none", "pll3_clk",
"i2s_src_pad_clk", };
-static const char *i2s_ref_parents[] = { "i2s_src_mux_clk", "i2s_prs1_clk", };
+static const char *i2s_ref_parents[] = { "i2s_src_mclk", "i2s_prs1_clk", };
static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk",
"pll3_clk", };
static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco3div2_clk",
"pll2_clk", };
static const char *rmii_phy_parents[] = { "ras_tx50_clk", "none",
- "ras_pll2_clk", "ras_synth0_clk", };
+ "ras_pll2_clk", "ras_syn0_clk", };
static const char *smii_rgmii_phy_parents[] = { "none", "ras_tx125_clk",
- "ras_pll2_clk", "ras_synth0_clk", };
-static const char *uart_parents[] = { "ras_apb_clk", "gen_synth3_clk", };
-static const char *i2c_parents[] = { "ras_apb_clk", "gen_synth1_clk", };
-static const char *ssp1_parents[] = { "ras_apb_clk", "gen_synth1_clk",
+ "ras_pll2_clk", "ras_syn0_clk", };
+static const char *uart_parents[] = { "ras_apb_clk", "gen_syn3_clk", };
+static const char *i2c_parents[] = { "ras_apb_clk", "gen_syn1_clk", };
+static const char *ssp1_parents[] = { "ras_apb_clk", "gen_syn1_clk",
"ras_plclk0_clk", };
-static const char *pci_parents[] = { "ras_pll3_clk", "gen_synth2_clk", };
-static const char *tdm_parents[] = { "ras_pll3_clk", "gen_synth1_clk", };
+static const char *pci_parents[] = { "ras_pll3_clk", "gen_syn2_clk", };
+static const char *tdm_parents[] = { "ras_pll3_clk", "gen_syn1_clk", };
void __init spear1310_clk_init(void)
{
@@ -390,9 +389,9 @@
25000000);
clk_register_clkdev(clk, "osc_25m_clk", NULL);
- clk = clk_register_fixed_rate(NULL, "gmii_125m_pad_clk", NULL,
- CLK_IS_ROOT, 125000000);
- clk_register_clkdev(clk, "gmii_125m_pad_clk", NULL);
+ clk = clk_register_fixed_rate(NULL, "gmii_pad_clk", NULL, CLK_IS_ROOT,
+ 125000000);
+ clk_register_clkdev(clk, "gmii_pad_clk", NULL);
clk = clk_register_fixed_rate(NULL, "i2s_src_pad_clk", NULL,
CLK_IS_ROOT, 12288000);
@@ -406,34 +405,34 @@
/* clock derived from 24 or 25 MHz osc clk */
/* vco-pll */
- clk = clk_register_mux(NULL, "vco1_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco1_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
SPEAR1310_PLL1_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco1_mux_clk", NULL);
- clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mux_clk",
+ clk_register_clkdev(clk, "vco1_mclk", NULL);
+ clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mclk",
0, SPEAR1310_PLL1_CTR, SPEAR1310_PLL1_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco1_clk", NULL);
clk_register_clkdev(clk1, "pll1_clk", NULL);
- clk = clk_register_mux(NULL, "vco2_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco2_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
SPEAR1310_PLL2_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco2_mux_clk", NULL);
- clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mux_clk",
+ clk_register_clkdev(clk, "vco2_mclk", NULL);
+ clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mclk",
0, SPEAR1310_PLL2_CTR, SPEAR1310_PLL2_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco2_clk", NULL);
clk_register_clkdev(clk1, "pll2_clk", NULL);
- clk = clk_register_mux(NULL, "vco3_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco3_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
SPEAR1310_PLL3_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco3_mux_clk", NULL);
- clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mux_clk",
+ clk_register_clkdev(clk, "vco3_mclk", NULL);
+ clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mclk",
0, SPEAR1310_PLL3_CTR, SPEAR1310_PLL3_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco3_clk", NULL);
@@ -473,7 +472,7 @@
/* peripherals */
clk_register_fixed_factor(NULL, "thermal_clk", "osc_24m_clk", 0, 1,
128);
- clk = clk_register_gate(NULL, "thermal_gate_clk", "thermal_clk", 0,
+ clk = clk_register_gate(NULL, "thermal_gclk", "thermal_clk", 0,
SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_THSENS_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_thermal");
@@ -500,177 +499,176 @@
clk_register_clkdev(clk, "apb_clk", NULL);
/* gpt clocks */
- clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt0_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_GPT0_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt0_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt0_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPT0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt0");
- clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt1_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_GPT1_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt1_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPT1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt1");
- clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt2_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_GPT2_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt2_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0,
SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_GPT2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt2");
- clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt3_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_GPT3_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt3_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mclk", 0,
SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_GPT3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt3");
/* others */
- clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
- "vco1div2_clk", 0, SPEAR1310_UART_CLK_SYNT, NULL,
- aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "uart_synth_clk", NULL);
- clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+ clk = clk_register_aux("uart_syn_clk", "uart_syn_gclk", "vco1div2_clk",
+ 0, SPEAR1310_UART_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "uart_syn_clk", NULL);
+ clk_register_clkdev(clk1, "uart_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+ clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents,
ARRAY_SIZE(uart0_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_UART_CLK_SHIFT, SPEAR1310_UART_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart0_mclk", NULL);
- clk = clk_register_gate(NULL, "uart0_clk", "uart0_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UART_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "e0000000.serial");
- clk = clk_register_aux("sdhci_synth_clk", "sdhci_synth_gate_clk",
+ clk = clk_register_aux("sdhci_syn_clk", "sdhci_syn_gclk",
"vco1div2_clk", 0, SPEAR1310_SDHCI_CLK_SYNT, NULL,
aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "sdhci_synth_clk", NULL);
- clk_register_clkdev(clk1, "sdhci_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "sdhci_syn_clk", NULL);
+ clk_register_clkdev(clk1, "sdhci_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SDHCI_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b3000000.sdhci");
- clk = clk_register_aux("cfxd_synth_clk", "cfxd_synth_gate_clk",
- "vco1div2_clk", 0, SPEAR1310_CFXD_CLK_SYNT, NULL,
- aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "cfxd_synth_clk", NULL);
- clk_register_clkdev(clk1, "cfxd_synth_gate_clk", NULL);
+ clk = clk_register_aux("cfxd_syn_clk", "cfxd_syn_gclk", "vco1div2_clk",
+ 0, SPEAR1310_CFXD_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "cfxd_syn_clk", NULL);
+ clk_register_clkdev(clk1, "cfxd_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CFXD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b2800000.cf");
clk_register_clkdev(clk, NULL, "arasan_xd");
- clk = clk_register_aux("c3_synth_clk", "c3_synth_gate_clk",
- "vco1div2_clk", 0, SPEAR1310_C3_CLK_SYNT, NULL,
- aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "c3_synth_clk", NULL);
- clk_register_clkdev(clk1, "c3_synth_gate_clk", NULL);
+ clk = clk_register_aux("c3_syn_clk", "c3_syn_gclk", "vco1div2_clk",
+ 0, SPEAR1310_C3_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "c3_syn_clk", NULL);
+ clk_register_clkdev(clk1, "c3_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "c3_mux_clk", c3_parents,
+ clk = clk_register_mux(NULL, "c3_mclk", c3_parents,
ARRAY_SIZE(c3_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_C3_CLK_SHIFT, SPEAR1310_C3_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "c3_mux_clk", NULL);
+ clk_register_clkdev(clk, "c3_mclk", NULL);
- clk = clk_register_gate(NULL, "c3_clk", "c3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_C3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "c3");
/* gmac */
- clk = clk_register_mux(NULL, "gmac_phy_input_mux_clk",
- gmac_phy_input_parents,
+ clk = clk_register_mux(NULL, "phy_input_mclk", gmac_phy_input_parents,
ARRAY_SIZE(gmac_phy_input_parents), 0,
SPEAR1310_GMAC_CLK_CFG,
SPEAR1310_GMAC_PHY_INPUT_CLK_SHIFT,
SPEAR1310_GMAC_PHY_INPUT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gmac_phy_input_mux_clk", NULL);
+ clk_register_clkdev(clk, "phy_input_mclk", NULL);
- clk = clk_register_aux("gmac_phy_synth_clk", "gmac_phy_synth_gate_clk",
- "gmac_phy_input_mux_clk", 0, SPEAR1310_GMAC_CLK_SYNT,
- NULL, gmac_rtbl, ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gmac_phy_synth_clk", NULL);
- clk_register_clkdev(clk1, "gmac_phy_synth_gate_clk", NULL);
+ clk = clk_register_aux("phy_syn_clk", "phy_syn_gclk", "phy_input_mclk",
+ 0, SPEAR1310_GMAC_CLK_SYNT, NULL, gmac_rtbl,
+ ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "phy_syn_clk", NULL);
+ clk_register_clkdev(clk1, "phy_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "gmac_phy_mux_clk", gmac_phy_parents,
+ clk = clk_register_mux(NULL, "phy_mclk", gmac_phy_parents,
ARRAY_SIZE(gmac_phy_parents), 0,
SPEAR1310_PERIP_CLK_CFG, SPEAR1310_GMAC_PHY_CLK_SHIFT,
SPEAR1310_GMAC_PHY_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, NULL, "stmmacphy.0");
/* clcd */
- clk = clk_register_mux(NULL, "clcd_synth_mux_clk", clcd_synth_parents,
+ clk = clk_register_mux(NULL, "clcd_syn_mclk", clcd_synth_parents,
ARRAY_SIZE(clcd_synth_parents), 0,
SPEAR1310_CLCD_CLK_SYNT, SPEAR1310_CLCD_SYNT_CLK_SHIFT,
SPEAR1310_CLCD_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "clcd_synth_mux_clk", NULL);
+ clk_register_clkdev(clk, "clcd_syn_mclk", NULL);
- clk = clk_register_frac("clcd_synth_clk", "clcd_synth_mux_clk", 0,
+ clk = clk_register_frac("clcd_syn_clk", "clcd_syn_mclk", 0,
SPEAR1310_CLCD_CLK_SYNT, clcd_rtbl,
ARRAY_SIZE(clcd_rtbl), &_lock);
- clk_register_clkdev(clk, "clcd_synth_clk", NULL);
+ clk_register_clkdev(clk, "clcd_syn_clk", NULL);
- clk = clk_register_mux(NULL, "clcd_pixel_mux_clk", clcd_pixel_parents,
+ clk = clk_register_mux(NULL, "clcd_pixel_mclk", clcd_pixel_parents,
ARRAY_SIZE(clcd_pixel_parents), 0,
SPEAR1310_PERIP_CLK_CFG, SPEAR1310_CLCD_CLK_SHIFT,
SPEAR1310_CLCD_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, "clcd_pixel_clk", NULL);
- clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mux_clk", 0,
+ clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CLCD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, "clcd_clk", NULL);
/* i2s */
- clk = clk_register_mux(NULL, "i2s_src_mux_clk", i2s_src_parents,
+ clk = clk_register_mux(NULL, "i2s_src_mclk", i2s_src_parents,
ARRAY_SIZE(i2s_src_parents), 0, SPEAR1310_I2S_CLK_CFG,
SPEAR1310_I2S_SRC_CLK_SHIFT, SPEAR1310_I2S_SRC_CLK_MASK,
0, &_lock);
clk_register_clkdev(clk, "i2s_src_clk", NULL);
- clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mux_clk", 0,
+ clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk", 0,
SPEAR1310_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl,
ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL);
clk_register_clkdev(clk, "i2s_prs1_clk", NULL);
- clk = clk_register_mux(NULL, "i2s_ref_mux_clk", i2s_ref_parents,
+ clk = clk_register_mux(NULL, "i2s_ref_mclk", i2s_ref_parents,
ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1310_I2S_CLK_CFG,
SPEAR1310_I2S_REF_SHIFT, SPEAR1310_I2S_REF_SEL_MASK, 0,
&_lock);
clk_register_clkdev(clk, "i2s_ref_clk", NULL);
- clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mclk", 0,
SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_I2S_REF_PAD_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL);
- clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gate_clk",
+ clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gclk",
"i2s_ref_pad_clk", 0, SPEAR1310_I2S_CLK_CFG,
&i2s_sclk_masks, i2s_sclk_rtbl,
ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1);
clk_register_clkdev(clk, "i2s_sclk_clk", NULL);
- clk_register_clkdev(clk1, "i2s_sclk_gate_clk", NULL);
+ clk_register_clkdev(clk1, "i2s_sclk_gclk", NULL);
/* clock derived from ahb clk */
clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0,
@@ -747,13 +745,13 @@
&_lock);
clk_register_clkdev(clk, "sysram1_clk", NULL);
- clk = clk_register_aux("adc_synth_clk", "adc_synth_gate_clk", "ahb_clk",
+ clk = clk_register_aux("adc_syn_clk", "adc_syn_gclk", "ahb_clk",
0, SPEAR1310_ADC_CLK_SYNT, NULL, adc_rtbl,
ARRAY_SIZE(adc_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "adc_synth_clk", NULL);
- clk_register_clkdev(clk1, "adc_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "adc_syn_clk", NULL);
+ clk_register_clkdev(clk1, "adc_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "adc_clk", "adc_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_ADC_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "adc_clk");
@@ -790,37 +788,37 @@
clk_register_clkdev(clk, NULL, "e0300000.kbd");
/* RAS clks */
- clk = clk_register_mux(NULL, "gen_synth0_1_mux_clk",
- gen_synth0_1_parents, ARRAY_SIZE(gen_synth0_1_parents),
- 0, SPEAR1310_PLL_CFG, SPEAR1310_RAS_SYNT0_1_CLK_SHIFT,
+ clk = clk_register_mux(NULL, "gen_syn0_1_mclk", gen_synth0_1_parents,
+ ARRAY_SIZE(gen_synth0_1_parents), 0, SPEAR1310_PLL_CFG,
+ SPEAR1310_RAS_SYNT0_1_CLK_SHIFT,
SPEAR1310_RAS_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gen_synth0_1_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn0_1_clk", NULL);
- clk = clk_register_mux(NULL, "gen_synth2_3_mux_clk",
- gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents),
- 0, SPEAR1310_PLL_CFG, SPEAR1310_RAS_SYNT2_3_CLK_SHIFT,
+ clk = clk_register_mux(NULL, "gen_syn2_3_mclk", gen_synth2_3_parents,
+ ARRAY_SIZE(gen_synth2_3_parents), 0, SPEAR1310_PLL_CFG,
+ SPEAR1310_RAS_SYNT2_3_CLK_SHIFT,
SPEAR1310_RAS_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gen_synth2_3_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn2_3_clk", NULL);
- clk = clk_register_frac("gen_synth0_clk", "gen_synth0_1_clk", 0,
+ clk = clk_register_frac("gen_syn0_clk", "gen_syn0_1_clk", 0,
SPEAR1310_RAS_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth0_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn0_clk", NULL);
- clk = clk_register_frac("gen_synth1_clk", "gen_synth0_1_clk", 0,
+ clk = clk_register_frac("gen_syn1_clk", "gen_syn0_1_clk", 0,
SPEAR1310_RAS_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth1_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn1_clk", NULL);
- clk = clk_register_frac("gen_synth2_clk", "gen_synth2_3_clk", 0,
+ clk = clk_register_frac("gen_syn2_clk", "gen_syn2_3_clk", 0,
SPEAR1310_RAS_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth2_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn2_clk", NULL);
- clk = clk_register_frac("gen_synth3_clk", "gen_synth2_3_clk", 0,
+ clk = clk_register_frac("gen_syn3_clk", "gen_syn2_3_clk", 0,
SPEAR1310_RAS_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth3_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn3_clk", NULL);
clk = clk_register_gate(NULL, "ras_osc_24m_clk", "osc_24m_clk", 0,
SPEAR1310_RAS_CLK_ENB, SPEAR1310_OSC_24M_CLK_ENB, 0,
@@ -847,7 +845,7 @@
&_lock);
clk_register_clkdev(clk, "ras_pll3_clk", NULL);
- clk = clk_register_gate(NULL, "ras_tx125_clk", "gmii_125m_pad_clk", 0,
+ clk = clk_register_gate(NULL, "ras_tx125_clk", "gmii_pad_clk", 0,
SPEAR1310_RAS_CLK_ENB, SPEAR1310_C125M_PAD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, "ras_tx125_clk", NULL);
@@ -912,7 +910,7 @@
&_lock);
clk_register_clkdev(clk, NULL, "5c700000.eth");
- clk = clk_register_mux(NULL, "smii_rgmii_phy_mux_clk",
+ clk = clk_register_mux(NULL, "smii_rgmii_phy_mclk",
smii_rgmii_phy_parents,
ARRAY_SIZE(smii_rgmii_phy_parents), 0,
SPEAR1310_RAS_CTRL_REG1,
@@ -922,184 +920,184 @@
clk_register_clkdev(clk, NULL, "stmmacphy.2");
clk_register_clkdev(clk, NULL, "stmmacphy.4");
- clk = clk_register_mux(NULL, "rmii_phy_mux_clk", rmii_phy_parents,
+ clk = clk_register_mux(NULL, "rmii_phy_mclk", rmii_phy_parents,
ARRAY_SIZE(rmii_phy_parents), 0,
SPEAR1310_RAS_CTRL_REG1, SPEAR1310_RMII_PHY_CLK_SHIFT,
SPEAR1310_PHY_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, NULL, "stmmacphy.3");
- clk = clk_register_mux(NULL, "uart1_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart1_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_UART1_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
0, &_lock);
- clk_register_clkdev(clk, "uart1_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart1_mclk", NULL);
- clk = clk_register_gate(NULL, "uart1_clk", "uart1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart1_clk", "uart1_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5c800000.serial");
- clk = clk_register_mux(NULL, "uart2_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart2_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_UART2_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
0, &_lock);
- clk_register_clkdev(clk, "uart2_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart2_mclk", NULL);
- clk = clk_register_gate(NULL, "uart2_clk", "uart2_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart2_clk", "uart2_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5c900000.serial");
- clk = clk_register_mux(NULL, "uart3_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart3_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_UART3_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
0, &_lock);
- clk_register_clkdev(clk, "uart3_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart3_mclk", NULL);
- clk = clk_register_gate(NULL, "uart3_clk", "uart3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart3_clk", "uart3_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5ca00000.serial");
- clk = clk_register_mux(NULL, "uart4_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart4_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_UART4_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
0, &_lock);
- clk_register_clkdev(clk, "uart4_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart4_mclk", NULL);
- clk = clk_register_gate(NULL, "uart4_clk", "uart4_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart4_clk", "uart4_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART4_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5cb00000.serial");
- clk = clk_register_mux(NULL, "uart5_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart5_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_UART5_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
0, &_lock);
- clk_register_clkdev(clk, "uart5_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart5_mclk", NULL);
- clk = clk_register_gate(NULL, "uart5_clk", "uart5_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart5_clk", "uart5_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART5_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5cc00000.serial");
- clk = clk_register_mux(NULL, "i2c1_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c1_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C1_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c1_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c1_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c1_clk", "i2c1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c1_clk", "i2c1_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5cd00000.i2c");
- clk = clk_register_mux(NULL, "i2c2_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c2_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C2_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c2_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c2_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c2_clk", "i2c2_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c2_clk", "i2c2_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5ce00000.i2c");
- clk = clk_register_mux(NULL, "i2c3_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c3_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C3_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c3_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c3_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c3_clk", "i2c3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c3_clk", "i2c3_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5cf00000.i2c");
- clk = clk_register_mux(NULL, "i2c4_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c4_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C4_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c4_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c4_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c4_clk", "i2c4_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c4_clk", "i2c4_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C4_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5d000000.i2c");
- clk = clk_register_mux(NULL, "i2c5_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c5_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C5_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c5_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c5_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c5_clk", "i2c5_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c5_clk", "i2c5_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C5_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5d100000.i2c");
- clk = clk_register_mux(NULL, "i2c6_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c6_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C6_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c6_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c6_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c6_clk", "i2c6_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c6_clk", "i2c6_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C6_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5d200000.i2c");
- clk = clk_register_mux(NULL, "i2c7_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c7_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C7_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c7_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c7_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c7_clk", "i2c7_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c7_clk", "i2c7_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C7_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5d300000.i2c");
- clk = clk_register_mux(NULL, "ssp1_mux_clk", ssp1_parents,
+ clk = clk_register_mux(NULL, "ssp1_mclk", ssp1_parents,
ARRAY_SIZE(ssp1_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_SSP1_CLK_SHIFT, SPEAR1310_SSP1_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "ssp1_mux_clk", NULL);
+ clk_register_clkdev(clk, "ssp1_mclk", NULL);
- clk = clk_register_gate(NULL, "ssp1_clk", "ssp1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "ssp1_clk", "ssp1_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_SSP1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5d400000.spi");
- clk = clk_register_mux(NULL, "pci_mux_clk", pci_parents,
+ clk = clk_register_mux(NULL, "pci_mclk", pci_parents,
ARRAY_SIZE(pci_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_PCI_CLK_SHIFT, SPEAR1310_PCI_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "pci_mux_clk", NULL);
+ clk_register_clkdev(clk, "pci_mclk", NULL);
- clk = clk_register_gate(NULL, "pci_clk", "pci_mux_clk", 0,
+ clk = clk_register_gate(NULL, "pci_clk", "pci_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_PCI_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "pci");
- clk = clk_register_mux(NULL, "tdm1_mux_clk", tdm_parents,
+ clk = clk_register_mux(NULL, "tdm1_mclk", tdm_parents,
ARRAY_SIZE(tdm_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_TDM1_CLK_SHIFT, SPEAR1310_TDM_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "tdm1_mux_clk", NULL);
+ clk_register_clkdev(clk, "tdm1_mclk", NULL);
- clk = clk_register_gate(NULL, "tdm1_clk", "tdm1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "tdm1_clk", "tdm1_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_TDM1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "tdm_hdlc.0");
- clk = clk_register_mux(NULL, "tdm2_mux_clk", tdm_parents,
+ clk = clk_register_mux(NULL, "tdm2_mclk", tdm_parents,
ARRAY_SIZE(tdm_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_TDM2_CLK_SHIFT, SPEAR1310_TDM_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "tdm2_mux_clk", NULL);
+ clk_register_clkdev(clk, "tdm2_mclk", NULL);
- clk = clk_register_gate(NULL, "tdm2_clk", "tdm2_mux_clk", 0,
+ clk = clk_register_gate(NULL, "tdm2_clk", "tdm2_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_TDM2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "tdm_hdlc.1");
diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c
index f130919..2352cee 100644
--- a/drivers/clk/spear/spear1340_clock.c
+++ b/drivers/clk/spear/spear1340_clock.c
@@ -4,7 +4,7 @@
* SPEAr1340 machine clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
@@ -369,27 +369,25 @@
/* clock parents */
static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", };
-static const char *sys_parents[] = { "none", "pll1_clk", "none", "none",
- "sys_synth_clk", "none", "pll2_clk", "pll3_clk", };
-static const char *ahb_parents[] = { "cpu_div3_clk", "amba_synth_clk", };
+static const char *sys_parents[] = { "pll1_clk", "pll1_clk", "pll1_clk",
+ "pll1_clk", "sys_synth_clk", "sys_synth_clk", "pll2_clk", "pll3_clk", };
+static const char *ahb_parents[] = { "cpu_div3_clk", "amba_syn_clk", };
static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", };
static const char *uart0_parents[] = { "pll5_clk", "osc_24m_clk",
- "uart0_synth_gate_clk", };
+ "uart0_syn_gclk", };
static const char *uart1_parents[] = { "pll5_clk", "osc_24m_clk",
- "uart1_synth_gate_clk", };
-static const char *c3_parents[] = { "pll5_clk", "c3_synth_gate_clk", };
-static const char *gmac_phy_input_parents[] = { "gmii_125m_pad_clk", "pll2_clk",
+ "uart1_syn_gclk", };
+static const char *c3_parents[] = { "pll5_clk", "c3_syn_gclk", };
+static const char *gmac_phy_input_parents[] = { "gmii_pad_clk", "pll2_clk",
"osc_25m_clk", };
-static const char *gmac_phy_parents[] = { "gmac_phy_input_mux_clk",
- "gmac_phy_synth_gate_clk", };
+static const char *gmac_phy_parents[] = { "phy_input_mclk", "phy_syn_gclk", };
static const char *clcd_synth_parents[] = { "vco1div4_clk", "pll2_clk", };
-static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_synth_clk", };
+static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_syn_clk", };
static const char *i2s_src_parents[] = { "vco1div2_clk", "pll2_clk", "pll3_clk",
"i2s_src_pad_clk", };
-static const char *i2s_ref_parents[] = { "i2s_src_mux_clk", "i2s_prs1_clk", };
-static const char *spdif_out_parents[] = { "i2s_src_pad_clk", "gen_synth2_clk",
-};
-static const char *spdif_in_parents[] = { "pll2_clk", "gen_synth3_clk", };
+static const char *i2s_ref_parents[] = { "i2s_src_mclk", "i2s_prs1_clk", };
+static const char *spdif_out_parents[] = { "i2s_src_pad_clk", "gen_syn2_clk", };
+static const char *spdif_in_parents[] = { "pll2_clk", "gen_syn3_clk", };
static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk",
"pll3_clk", };
@@ -415,9 +413,9 @@
25000000);
clk_register_clkdev(clk, "osc_25m_clk", NULL);
- clk = clk_register_fixed_rate(NULL, "gmii_125m_pad_clk", NULL,
- CLK_IS_ROOT, 125000000);
- clk_register_clkdev(clk, "gmii_125m_pad_clk", NULL);
+ clk = clk_register_fixed_rate(NULL, "gmii_pad_clk", NULL, CLK_IS_ROOT,
+ 125000000);
+ clk_register_clkdev(clk, "gmii_pad_clk", NULL);
clk = clk_register_fixed_rate(NULL, "i2s_src_pad_clk", NULL,
CLK_IS_ROOT, 12288000);
@@ -431,35 +429,35 @@
/* clock derived from 24 or 25 MHz osc clk */
/* vco-pll */
- clk = clk_register_mux(NULL, "vco1_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco1_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
SPEAR1340_PLL1_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco1_mux_clk", NULL);
- clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mux_clk",
- 0, SPEAR1340_PLL1_CTR, SPEAR1340_PLL1_FRQ, pll_rtbl,
+ clk_register_clkdev(clk, "vco1_mclk", NULL);
+ clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mclk", 0,
+ SPEAR1340_PLL1_CTR, SPEAR1340_PLL1_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco1_clk", NULL);
clk_register_clkdev(clk1, "pll1_clk", NULL);
- clk = clk_register_mux(NULL, "vco2_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco2_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
SPEAR1340_PLL2_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco2_mux_clk", NULL);
- clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mux_clk",
- 0, SPEAR1340_PLL2_CTR, SPEAR1340_PLL2_FRQ, pll_rtbl,
+ clk_register_clkdev(clk, "vco2_mclk", NULL);
+ clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mclk", 0,
+ SPEAR1340_PLL2_CTR, SPEAR1340_PLL2_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco2_clk", NULL);
clk_register_clkdev(clk1, "pll2_clk", NULL);
- clk = clk_register_mux(NULL, "vco3_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco3_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
SPEAR1340_PLL3_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco3_mux_clk", NULL);
- clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mux_clk",
- 0, SPEAR1340_PLL3_CTR, SPEAR1340_PLL3_FRQ, pll_rtbl,
+ clk_register_clkdev(clk, "vco3_mclk", NULL);
+ clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mclk", 0,
+ SPEAR1340_PLL3_CTR, SPEAR1340_PLL3_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco3_clk", NULL);
clk_register_clkdev(clk1, "pll3_clk", NULL);
@@ -498,7 +496,7 @@
/* peripherals */
clk_register_fixed_factor(NULL, "thermal_clk", "osc_24m_clk", 0, 1,
128);
- clk = clk_register_gate(NULL, "thermal_gate_clk", "thermal_clk", 0,
+ clk = clk_register_gate(NULL, "thermal_gclk", "thermal_clk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_THSENS_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_thermal");
@@ -509,23 +507,23 @@
clk_register_clkdev(clk, "ddr_clk", NULL);
/* clock derived from pll1 clk */
- clk = clk_register_frac("sys_synth_clk", "vco1div2_clk", 0,
+ clk = clk_register_frac("sys_syn_clk", "vco1div2_clk", 0,
SPEAR1340_SYS_CLK_SYNT, sys_synth_rtbl,
ARRAY_SIZE(sys_synth_rtbl), &_lock);
- clk_register_clkdev(clk, "sys_synth_clk", NULL);
+ clk_register_clkdev(clk, "sys_syn_clk", NULL);
- clk = clk_register_frac("amba_synth_clk", "vco1div2_clk", 0,
+ clk = clk_register_frac("amba_syn_clk", "vco1div2_clk", 0,
SPEAR1340_AMBA_CLK_SYNT, amba_synth_rtbl,
ARRAY_SIZE(amba_synth_rtbl), &_lock);
- clk_register_clkdev(clk, "amba_synth_clk", NULL);
+ clk_register_clkdev(clk, "amba_syn_clk", NULL);
- clk = clk_register_mux(NULL, "sys_mux_clk", sys_parents,
+ clk = clk_register_mux(NULL, "sys_mclk", sys_parents,
ARRAY_SIZE(sys_parents), 0, SPEAR1340_SYS_CLK_CTRL,
SPEAR1340_SCLK_SRC_SEL_SHIFT,
SPEAR1340_SCLK_SRC_SEL_MASK, 0, &_lock);
clk_register_clkdev(clk, "sys_clk", NULL);
- clk = clk_register_fixed_factor(NULL, "cpu_clk", "sys_mux_clk", 0, 1,
+ clk = clk_register_fixed_factor(NULL, "cpu_clk", "sys_mclk", 0, 1,
2);
clk_register_clkdev(clk, "cpu_clk", NULL);
@@ -548,194 +546,193 @@
clk_register_clkdev(clk, "apb_clk", NULL);
/* gpt clocks */
- clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt0_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_GPT0_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt0_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt0_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt0");
- clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt1_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_GPT1_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt1_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt1");
- clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt2_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_GPT2_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt2_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt2");
- clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt3_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_GPT3_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt3_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mclk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt3");
/* others */
- clk = clk_register_aux("uart0_synth_clk", "uart0_synth_gate_clk",
+ clk = clk_register_aux("uart0_syn_clk", "uart0_syn_gclk",
"vco1div2_clk", 0, SPEAR1340_UART0_CLK_SYNT, NULL,
aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "uart0_synth_clk", NULL);
- clk_register_clkdev(clk1, "uart0_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "uart0_syn_clk", NULL);
+ clk_register_clkdev(clk1, "uart0_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+ clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents,
ARRAY_SIZE(uart0_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_UART0_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart0_mclk", NULL);
- clk = clk_register_gate(NULL, "uart0_clk", "uart0_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "e0000000.serial");
- clk = clk_register_aux("uart1_synth_clk", "uart1_synth_gate_clk",
+ clk = clk_register_aux("uart1_syn_clk", "uart1_syn_gclk",
"vco1div2_clk", 0, SPEAR1340_UART1_CLK_SYNT, NULL,
aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "uart1_synth_clk", NULL);
- clk_register_clkdev(clk1, "uart1_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "uart1_syn_clk", NULL);
+ clk_register_clkdev(clk1, "uart1_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "uart1_mux_clk", uart1_parents,
+ clk = clk_register_mux(NULL, "uart1_mclk", uart1_parents,
ARRAY_SIZE(uart1_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_UART1_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "uart1_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart1_mclk", NULL);
- clk = clk_register_gate(NULL, "uart1_clk", "uart1_mux_clk", 0,
- SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART1_CLK_ENB, 0,
+ clk = clk_register_gate(NULL, "uart1_clk", "uart1_mclk", 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_UART1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b4100000.serial");
- clk = clk_register_aux("sdhci_synth_clk", "sdhci_synth_gate_clk",
+ clk = clk_register_aux("sdhci_syn_clk", "sdhci_syn_gclk",
"vco1div2_clk", 0, SPEAR1340_SDHCI_CLK_SYNT, NULL,
aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "sdhci_synth_clk", NULL);
- clk_register_clkdev(clk1, "sdhci_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "sdhci_syn_clk", NULL);
+ clk_register_clkdev(clk1, "sdhci_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SDHCI_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b3000000.sdhci");
- clk = clk_register_aux("cfxd_synth_clk", "cfxd_synth_gate_clk",
- "vco1div2_clk", 0, SPEAR1340_CFXD_CLK_SYNT, NULL,
- aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "cfxd_synth_clk", NULL);
- clk_register_clkdev(clk1, "cfxd_synth_gate_clk", NULL);
+ clk = clk_register_aux("cfxd_syn_clk", "cfxd_syn_gclk", "vco1div2_clk",
+ 0, SPEAR1340_CFXD_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "cfxd_syn_clk", NULL);
+ clk_register_clkdev(clk1, "cfxd_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CFXD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b2800000.cf");
clk_register_clkdev(clk, NULL, "arasan_xd");
- clk = clk_register_aux("c3_synth_clk", "c3_synth_gate_clk",
- "vco1div2_clk", 0, SPEAR1340_C3_CLK_SYNT, NULL,
- aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "c3_synth_clk", NULL);
- clk_register_clkdev(clk1, "c3_synth_gate_clk", NULL);
+ clk = clk_register_aux("c3_syn_clk", "c3_syn_gclk", "vco1div2_clk", 0,
+ SPEAR1340_C3_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "c3_syn_clk", NULL);
+ clk_register_clkdev(clk1, "c3_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "c3_mux_clk", c3_parents,
+ clk = clk_register_mux(NULL, "c3_mclk", c3_parents,
ARRAY_SIZE(c3_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_C3_CLK_SHIFT, SPEAR1340_C3_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "c3_mux_clk", NULL);
+ clk_register_clkdev(clk, "c3_mclk", NULL);
- clk = clk_register_gate(NULL, "c3_clk", "c3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_C3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "c3");
/* gmac */
- clk = clk_register_mux(NULL, "gmac_phy_input_mux_clk",
- gmac_phy_input_parents,
+ clk = clk_register_mux(NULL, "phy_input_mclk", gmac_phy_input_parents,
ARRAY_SIZE(gmac_phy_input_parents), 0,
SPEAR1340_GMAC_CLK_CFG,
SPEAR1340_GMAC_PHY_INPUT_CLK_SHIFT,
SPEAR1340_GMAC_PHY_INPUT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gmac_phy_input_mux_clk", NULL);
+ clk_register_clkdev(clk, "phy_input_mclk", NULL);
- clk = clk_register_aux("gmac_phy_synth_clk", "gmac_phy_synth_gate_clk",
- "gmac_phy_input_mux_clk", 0, SPEAR1340_GMAC_CLK_SYNT,
- NULL, gmac_rtbl, ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gmac_phy_synth_clk", NULL);
- clk_register_clkdev(clk1, "gmac_phy_synth_gate_clk", NULL);
+ clk = clk_register_aux("phy_syn_clk", "phy_syn_gclk", "phy_input_mclk",
+ 0, SPEAR1340_GMAC_CLK_SYNT, NULL, gmac_rtbl,
+ ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "phy_syn_clk", NULL);
+ clk_register_clkdev(clk1, "phy_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "gmac_phy_mux_clk", gmac_phy_parents,
+ clk = clk_register_mux(NULL, "phy_mclk", gmac_phy_parents,
ARRAY_SIZE(gmac_phy_parents), 0,
SPEAR1340_PERIP_CLK_CFG, SPEAR1340_GMAC_PHY_CLK_SHIFT,
SPEAR1340_GMAC_PHY_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, NULL, "stmmacphy.0");
/* clcd */
- clk = clk_register_mux(NULL, "clcd_synth_mux_clk", clcd_synth_parents,
+ clk = clk_register_mux(NULL, "clcd_syn_mclk", clcd_synth_parents,
ARRAY_SIZE(clcd_synth_parents), 0,
SPEAR1340_CLCD_CLK_SYNT, SPEAR1340_CLCD_SYNT_CLK_SHIFT,
SPEAR1340_CLCD_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "clcd_synth_mux_clk", NULL);
+ clk_register_clkdev(clk, "clcd_syn_mclk", NULL);
- clk = clk_register_frac("clcd_synth_clk", "clcd_synth_mux_clk", 0,
+ clk = clk_register_frac("clcd_syn_clk", "clcd_syn_mclk", 0,
SPEAR1340_CLCD_CLK_SYNT, clcd_rtbl,
ARRAY_SIZE(clcd_rtbl), &_lock);
- clk_register_clkdev(clk, "clcd_synth_clk", NULL);
+ clk_register_clkdev(clk, "clcd_syn_clk", NULL);
- clk = clk_register_mux(NULL, "clcd_pixel_mux_clk", clcd_pixel_parents,
+ clk = clk_register_mux(NULL, "clcd_pixel_mclk", clcd_pixel_parents,
ARRAY_SIZE(clcd_pixel_parents), 0,
SPEAR1340_PERIP_CLK_CFG, SPEAR1340_CLCD_CLK_SHIFT,
SPEAR1340_CLCD_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, "clcd_pixel_clk", NULL);
- clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mux_clk", 0,
+ clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CLCD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, "clcd_clk", NULL);
/* i2s */
- clk = clk_register_mux(NULL, "i2s_src_mux_clk", i2s_src_parents,
+ clk = clk_register_mux(NULL, "i2s_src_mclk", i2s_src_parents,
ARRAY_SIZE(i2s_src_parents), 0, SPEAR1340_I2S_CLK_CFG,
SPEAR1340_I2S_SRC_CLK_SHIFT, SPEAR1340_I2S_SRC_CLK_MASK,
0, &_lock);
clk_register_clkdev(clk, "i2s_src_clk", NULL);
- clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mux_clk", 0,
+ clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk", 0,
SPEAR1340_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl,
ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL);
clk_register_clkdev(clk, "i2s_prs1_clk", NULL);
- clk = clk_register_mux(NULL, "i2s_ref_mux_clk", i2s_ref_parents,
+ clk = clk_register_mux(NULL, "i2s_ref_mclk", i2s_ref_parents,
ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1340_I2S_CLK_CFG,
SPEAR1340_I2S_REF_SHIFT, SPEAR1340_I2S_REF_SEL_MASK, 0,
&_lock);
clk_register_clkdev(clk, "i2s_ref_clk", NULL);
- clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mclk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_I2S_REF_PAD_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL);
- clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gate_clk",
- "i2s_ref_mux_clk", 0, SPEAR1340_I2S_CLK_CFG,
- &i2s_sclk_masks, i2s_sclk_rtbl,
- ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1);
+ clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gclk", "i2s_ref_mclk",
+ 0, SPEAR1340_I2S_CLK_CFG, &i2s_sclk_masks,
+ i2s_sclk_rtbl, ARRAY_SIZE(i2s_sclk_rtbl), &_lock,
+ &clk1);
clk_register_clkdev(clk, "i2s_sclk_clk", NULL);
- clk_register_clkdev(clk1, "i2s_sclk_gate_clk", NULL);
+ clk_register_clkdev(clk1, "i2s_sclk_gclk", NULL);
/* clock derived from ahb clk */
clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0,
@@ -744,7 +741,7 @@
clk_register_clkdev(clk, NULL, "e0280000.i2c");
clk = clk_register_gate(NULL, "i2c1_clk", "ahb_clk", 0,
- SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2C1_CLK_ENB, 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_I2C1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b4000000.i2c");
@@ -800,13 +797,13 @@
&_lock);
clk_register_clkdev(clk, "sysram1_clk", NULL);
- clk = clk_register_aux("adc_synth_clk", "adc_synth_gate_clk", "ahb_clk",
+ clk = clk_register_aux("adc_syn_clk", "adc_syn_gclk", "ahb_clk",
0, SPEAR1340_ADC_CLK_SYNT, NULL, adc_rtbl,
ARRAY_SIZE(adc_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "adc_synth_clk", NULL);
- clk_register_clkdev(clk1, "adc_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "adc_syn_clk", NULL);
+ clk_register_clkdev(clk1, "adc_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "adc_clk", "adc_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_ADC_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "adc_clk");
@@ -843,39 +840,39 @@
clk_register_clkdev(clk, NULL, "e0300000.kbd");
/* RAS clks */
- clk = clk_register_mux(NULL, "gen_synth0_1_mux_clk",
- gen_synth0_1_parents, ARRAY_SIZE(gen_synth0_1_parents),
- 0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT0_1_CLK_SHIFT,
+ clk = clk_register_mux(NULL, "gen_syn0_1_mclk", gen_synth0_1_parents,
+ ARRAY_SIZE(gen_synth0_1_parents), 0, SPEAR1340_PLL_CFG,
+ SPEAR1340_GEN_SYNT0_1_CLK_SHIFT,
SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gen_synth0_1_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn0_1_clk", NULL);
- clk = clk_register_mux(NULL, "gen_synth2_3_mux_clk",
- gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents),
- 0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT2_3_CLK_SHIFT,
+ clk = clk_register_mux(NULL, "gen_syn2_3_mclk", gen_synth2_3_parents,
+ ARRAY_SIZE(gen_synth2_3_parents), 0, SPEAR1340_PLL_CFG,
+ SPEAR1340_GEN_SYNT2_3_CLK_SHIFT,
SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gen_synth2_3_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn2_3_clk", NULL);
- clk = clk_register_frac("gen_synth0_clk", "gen_synth0_1_clk", 0,
+ clk = clk_register_frac("gen_syn0_clk", "gen_syn0_1_clk", 0,
SPEAR1340_GEN_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth0_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn0_clk", NULL);
- clk = clk_register_frac("gen_synth1_clk", "gen_synth0_1_clk", 0,
+ clk = clk_register_frac("gen_syn1_clk", "gen_syn0_1_clk", 0,
SPEAR1340_GEN_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth1_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn1_clk", NULL);
- clk = clk_register_frac("gen_synth2_clk", "gen_synth2_3_clk", 0,
+ clk = clk_register_frac("gen_syn2_clk", "gen_syn2_3_clk", 0,
SPEAR1340_GEN_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth2_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn2_clk", NULL);
- clk = clk_register_frac("gen_synth3_clk", "gen_synth2_3_clk", 0,
+ clk = clk_register_frac("gen_syn3_clk", "gen_syn2_3_clk", 0,
SPEAR1340_GEN_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth3_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn3_clk", NULL);
- clk = clk_register_gate(NULL, "mali_clk", "gen_synth3_clk", 0,
+ clk = clk_register_gate(NULL, "mali_clk", "gen_syn3_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_MALI_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "mali");
@@ -890,74 +887,74 @@
&_lock);
clk_register_clkdev(clk, NULL, "spear_cec.1");
- clk = clk_register_mux(NULL, "spdif_out_mux_clk", spdif_out_parents,
+ clk = clk_register_mux(NULL, "spdif_out_mclk", spdif_out_parents,
ARRAY_SIZE(spdif_out_parents), 0,
SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_OUT_CLK_SHIFT,
SPEAR1340_SPDIF_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "spdif_out_mux_clk", NULL);
+ clk_register_clkdev(clk, "spdif_out_mclk", NULL);
- clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mux_clk", 0,
+ clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_OUT_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "spdif-out");
- clk = clk_register_mux(NULL, "spdif_in_mux_clk", spdif_in_parents,
+ clk = clk_register_mux(NULL, "spdif_in_mclk", spdif_in_parents,
ARRAY_SIZE(spdif_in_parents), 0,
SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_IN_CLK_SHIFT,
SPEAR1340_SPDIF_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "spdif_in_mux_clk", NULL);
+ clk_register_clkdev(clk, "spdif_in_mclk", NULL);
- clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mux_clk", 0,
+ clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_IN_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spdif-in");
- clk = clk_register_gate(NULL, "acp_clk", "acp_mux_clk", 0,
+ clk = clk_register_gate(NULL, "acp_clk", "acp_mclk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "acp_clk");
- clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mux_clk", 0,
+ clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "plgpio");
- clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mux_clk", 0,
+ clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "video_dec");
- clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mux_clk", 0,
+ clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_ENC_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "video_enc");
- clk = clk_register_gate(NULL, "video_in_clk", "video_in_mux_clk", 0,
+ clk = clk_register_gate(NULL, "video_in_clk", "video_in_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_IN_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_vip");
- clk = clk_register_gate(NULL, "cam0_clk", "cam0_mux_clk", 0,
+ clk = clk_register_gate(NULL, "cam0_clk", "cam0_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_camif.0");
- clk = clk_register_gate(NULL, "cam1_clk", "cam1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "cam1_clk", "cam1_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_camif.1");
- clk = clk_register_gate(NULL, "cam2_clk", "cam2_mux_clk", 0,
+ clk = clk_register_gate(NULL, "cam2_clk", "cam2_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_camif.2");
- clk = clk_register_gate(NULL, "cam3_clk", "cam3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "cam3_clk", "cam3_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_camif.3");
- clk = clk_register_gate(NULL, "pwm_clk", "pwm_mux_clk", 0,
+ clk = clk_register_gate(NULL, "pwm_clk", "pwm_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PWM_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "pwm");
diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c
index 440bb3e..c315745 100644
--- a/drivers/clk/spear/spear3xx_clock.c
+++ b/drivers/clk/spear/spear3xx_clock.c
@@ -2,7 +2,7 @@
* SPEAr3xx machines clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
@@ -122,12 +122,12 @@
};
/* clock parents */
-static const char *uart0_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", };
-static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk",
+static const char *uart0_parents[] = { "pll3_clk", "uart_syn_gclk", };
+static const char *firda_parents[] = { "pll3_clk", "firda_syn_gclk",
};
-static const char *gpt0_parents[] = { "pll3_48m_clk", "gpt0_synth_clk", };
-static const char *gpt1_parents[] = { "pll3_48m_clk", "gpt1_synth_clk", };
-static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", };
+static const char *gpt0_parents[] = { "pll3_clk", "gpt0_syn_clk", };
+static const char *gpt1_parents[] = { "pll3_clk", "gpt1_syn_clk", };
+static const char *gpt2_parents[] = { "pll3_clk", "gpt2_syn_clk", };
static const char *gen2_3_parents[] = { "pll1_clk", "pll2_clk", };
static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none",
"pll2_clk", };
@@ -137,7 +137,7 @@
{
struct clk *clk;
- clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0,
+ clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_clk", 0,
1, 1);
clk_register_clkdev(clk, NULL, "60000000.clcd");
@@ -219,15 +219,11 @@
#define SPEAR320_UARTX_PCLK_VAL_SYNTH1 0x0
#define SPEAR320_UARTX_PCLK_VAL_APB 0x1
-static const char *i2s_ref_parents[] = { "ras_pll2_clk",
- "ras_gen2_synth_gate_clk", };
-static const char *sdhci_parents[] = { "ras_pll3_48m_clk",
- "ras_gen3_synth_gate_clk",
-};
+static const char *i2s_ref_parents[] = { "ras_pll2_clk", "ras_syn2_gclk", };
+static const char *sdhci_parents[] = { "ras_pll3_clk", "ras_syn3_gclk", };
static const char *smii0_parents[] = { "smii_125m_pad", "ras_pll2_clk",
- "ras_gen0_synth_gate_clk", };
-static const char *uartx_parents[] = { "ras_gen1_synth_gate_clk", "ras_apb_clk",
-};
+ "ras_syn0_gclk", };
+static const char *uartx_parents[] = { "ras_syn1_gclk", "ras_apb_clk", };
static void __init spear320_clk_init(void)
{
@@ -237,7 +233,7 @@
CLK_IS_ROOT, 125000000);
clk_register_clkdev(clk, "smii_125m_pad", NULL);
- clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0,
+ clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_clk", 0,
1, 1);
clk_register_clkdev(clk, NULL, "90000000.clcd");
@@ -363,9 +359,9 @@
clk_register_clkdev(clk, NULL, "fc900000.rtc");
/* clock derived from 24 MHz osc clk */
- clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0,
+ clk = clk_register_fixed_rate(NULL, "pll3_clk", "osc_24m_clk", 0,
48000000);
- clk_register_clkdev(clk, "pll3_48m_clk", NULL);
+ clk_register_clkdev(clk, "pll3_clk", NULL);
clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_24m_clk", 0, 1,
1);
@@ -392,98 +388,98 @@
HCLK_RATIO_MASK, 0, &_lock);
clk_register_clkdev(clk, "ahb_clk", NULL);
- clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
- "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "uart_synth_clk", NULL);
- clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+ clk = clk_register_aux("uart_syn_clk", "uart_syn_gclk", "pll1_clk", 0,
+ UART_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "uart_syn_clk", NULL);
+ clk_register_clkdev(clk1, "uart_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+ clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents,
ARRAY_SIZE(uart0_parents), 0, PERIP_CLK_CFG,
UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart0_mclk", NULL);
- clk = clk_register_gate(NULL, "uart0", "uart0_mux_clk", 0,
- PERIP1_CLK_ENB, UART_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "uart0", "uart0_mclk", 0, PERIP1_CLK_ENB,
+ UART_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "d0000000.serial");
- clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk",
- "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "firda_synth_clk", NULL);
- clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL);
+ clk = clk_register_aux("firda_syn_clk", "firda_syn_gclk", "pll1_clk", 0,
+ FIRDA_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "firda_syn_clk", NULL);
+ clk_register_clkdev(clk1, "firda_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents,
+ clk = clk_register_mux(NULL, "firda_mclk", firda_parents,
ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG,
FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "firda_mux_clk", NULL);
+ clk_register_clkdev(clk, "firda_mclk", NULL);
- clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0,
+ clk = clk_register_gate(NULL, "firda_clk", "firda_mclk", 0,
PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "firda");
/* gpt clocks */
- clk_register_gpt("gpt0_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
- gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk_register_gpt("gpt0_syn_clk", "pll1_clk", 0, PRSC0_CLK_CFG, gpt_rtbl,
+ ARRAY_SIZE(gpt_rtbl), &_lock);
clk = clk_register_mux(NULL, "gpt0_clk", gpt0_parents,
ARRAY_SIZE(gpt0_parents), 0, PERIP_CLK_CFG,
GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt0");
- clk_register_gpt("gpt1_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
- gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
- clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt1_parents,
+ clk_register_gpt("gpt1_syn_clk", "pll1_clk", 0, PRSC1_CLK_CFG, gpt_rtbl,
+ ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk = clk_register_mux(NULL, "gpt1_mclk", gpt1_parents,
ARRAY_SIZE(gpt1_parents), 0, PERIP_CLK_CFG,
GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt1_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0,
PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt1");
- clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
- gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
- clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents,
+ clk_register_gpt("gpt2_syn_clk", "pll1_clk", 0, PRSC2_CLK_CFG, gpt_rtbl,
+ ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk = clk_register_mux(NULL, "gpt2_mclk", gpt2_parents,
ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG,
GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt2_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0,
PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt2");
/* general synths clocks */
- clk = clk_register_aux("gen0_synth_clk", "gen0_synth_gate_clk",
- "pll1_clk", 0, GEN0_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gen0_synth_clk", NULL);
- clk_register_clkdev(clk1, "gen0_synth_gate_clk", NULL);
+ clk = clk_register_aux("gen0_syn_clk", "gen0_syn_gclk", "pll1_clk",
+ 0, GEN0_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "gen0_syn_clk", NULL);
+ clk_register_clkdev(clk1, "gen0_syn_gclk", NULL);
- clk = clk_register_aux("gen1_synth_clk", "gen1_synth_gate_clk",
- "pll1_clk", 0, GEN1_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gen1_synth_clk", NULL);
- clk_register_clkdev(clk1, "gen1_synth_gate_clk", NULL);
+ clk = clk_register_aux("gen1_syn_clk", "gen1_syn_gclk", "pll1_clk",
+ 0, GEN1_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "gen1_syn_clk", NULL);
+ clk_register_clkdev(clk1, "gen1_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "gen2_3_parent_clk", gen2_3_parents,
+ clk = clk_register_mux(NULL, "gen2_3_par_clk", gen2_3_parents,
ARRAY_SIZE(gen2_3_parents), 0, CORE_CLK_CFG,
GEN_SYNTH2_3_CLK_SHIFT, GEN_SYNTH2_3_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gen2_3_parent_clk", NULL);
+ clk_register_clkdev(clk, "gen2_3_par_clk", NULL);
- clk = clk_register_aux("gen2_synth_clk", "gen2_synth_gate_clk",
- "gen2_3_parent_clk", 0, GEN2_CLK_SYNT, NULL, aux_rtbl,
+ clk = clk_register_aux("gen2_syn_clk", "gen2_syn_gclk",
+ "gen2_3_par_clk", 0, GEN2_CLK_SYNT, NULL, aux_rtbl,
ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gen2_synth_clk", NULL);
- clk_register_clkdev(clk1, "gen2_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "gen2_syn_clk", NULL);
+ clk_register_clkdev(clk1, "gen2_syn_gclk", NULL);
- clk = clk_register_aux("gen3_synth_clk", "gen3_synth_gate_clk",
- "gen2_3_parent_clk", 0, GEN3_CLK_SYNT, NULL, aux_rtbl,
+ clk = clk_register_aux("gen3_syn_clk", "gen3_syn_gclk",
+ "gen2_3_par_clk", 0, GEN3_CLK_SYNT, NULL, aux_rtbl,
ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gen3_synth_clk", NULL);
- clk_register_clkdev(clk1, "gen3_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "gen3_syn_clk", NULL);
+ clk_register_clkdev(clk1, "gen3_syn_gclk", NULL);
/* clock derived from pll3 clk */
- clk = clk_register_gate(NULL, "usbh_clk", "pll3_48m_clk", 0,
- PERIP1_CLK_ENB, USBH_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "usbh_clk", "pll3_clk", 0, PERIP1_CLK_ENB,
+ USBH_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, "usbh_clk", NULL);
clk = clk_register_fixed_factor(NULL, "usbh.0_clk", "usbh_clk", 0, 1,
@@ -494,8 +490,8 @@
1);
clk_register_clkdev(clk, "usbh.1_clk", NULL);
- clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0,
- PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "usbd_clk", "pll3_clk", 0, PERIP1_CLK_ENB,
+ USBD_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "designware_udc");
/* clock derived from ahb clk */
@@ -579,29 +575,25 @@
RAS_CLK_ENB, RAS_PLL2_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, "ras_pll2_clk", NULL);
- clk = clk_register_gate(NULL, "ras_pll3_48m_clk", "pll3_48m_clk", 0,
+ clk = clk_register_gate(NULL, "ras_pll3_clk", "pll3_clk", 0,
RAS_CLK_ENB, RAS_48M_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, "ras_pll3_48m_clk", NULL);
+ clk_register_clkdev(clk, "ras_pll3_clk", NULL);
- clk = clk_register_gate(NULL, "ras_gen0_synth_gate_clk",
- "gen0_synth_gate_clk", 0, RAS_CLK_ENB,
- RAS_SYNT0_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, "ras_gen0_synth_gate_clk", NULL);
+ clk = clk_register_gate(NULL, "ras_syn0_gclk", "gen0_syn_gclk", 0,
+ RAS_CLK_ENB, RAS_SYNT0_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_syn0_gclk", NULL);
- clk = clk_register_gate(NULL, "ras_gen1_synth_gate_clk",
- "gen1_synth_gate_clk", 0, RAS_CLK_ENB,
- RAS_SYNT1_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, "ras_gen1_synth_gate_clk", NULL);
+ clk = clk_register_gate(NULL, "ras_syn1_gclk", "gen1_syn_gclk", 0,
+ RAS_CLK_ENB, RAS_SYNT1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_syn1_gclk", NULL);
- clk = clk_register_gate(NULL, "ras_gen2_synth_gate_clk",
- "gen2_synth_gate_clk", 0, RAS_CLK_ENB,
- RAS_SYNT2_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, "ras_gen2_synth_gate_clk", NULL);
+ clk = clk_register_gate(NULL, "ras_syn2_gclk", "gen2_syn_gclk", 0,
+ RAS_CLK_ENB, RAS_SYNT2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_syn2_gclk", NULL);
- clk = clk_register_gate(NULL, "ras_gen3_synth_gate_clk",
- "gen3_synth_gate_clk", 0, RAS_CLK_ENB,
- RAS_SYNT3_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, "ras_gen3_synth_gate_clk", NULL);
+ clk = clk_register_gate(NULL, "ras_syn3_gclk", "gen3_syn_gclk", 0,
+ RAS_CLK_ENB, RAS_SYNT3_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_syn3_gclk", NULL);
if (of_machine_is_compatible("st,spear300"))
spear300_clk_init();
diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c
index f9a20b3..a98d086 100644
--- a/drivers/clk/spear/spear6xx_clock.c
+++ b/drivers/clk/spear/spear6xx_clock.c
@@ -2,7 +2,7 @@
* SPEAr6xx machines clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
@@ -97,13 +97,12 @@
{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
};
-static const char *clcd_parents[] = { "pll3_48m_clk", "clcd_synth_gate_clk", };
-static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk",
-};
-static const char *uart_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", };
-static const char *gpt0_1_parents[] = { "pll3_48m_clk", "gpt0_1_synth_clk", };
-static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", };
-static const char *gpt3_parents[] = { "pll3_48m_clk", "gpt3_synth_clk", };
+static const char *clcd_parents[] = { "pll3_clk", "clcd_syn_gclk", };
+static const char *firda_parents[] = { "pll3_clk", "firda_syn_gclk", };
+static const char *uart_parents[] = { "pll3_clk", "uart_syn_gclk", };
+static const char *gpt0_1_parents[] = { "pll3_clk", "gpt0_1_syn_clk", };
+static const char *gpt2_parents[] = { "pll3_clk", "gpt2_syn_clk", };
+static const char *gpt3_parents[] = { "pll3_clk", "gpt3_syn_clk", };
static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none",
"pll2_clk", };
@@ -136,9 +135,9 @@
clk_register_clkdev(clk, NULL, "rtc-spear");
/* clock derived from 30 MHz osc clk */
- clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0,
+ clk = clk_register_fixed_rate(NULL, "pll3_clk", "osc_24m_clk", 0,
48000000);
- clk_register_clkdev(clk, "pll3_48m_clk", NULL);
+ clk_register_clkdev(clk, "pll3_clk", NULL);
clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "osc_30m_clk",
0, PLL1_CTR, PLL1_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl),
@@ -146,9 +145,9 @@
clk_register_clkdev(clk, "vco1_clk", NULL);
clk_register_clkdev(clk1, "pll1_clk", NULL);
- clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL,
- "osc_30m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl,
- ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "osc_30m_clk",
+ 0, PLL2_CTR, PLL2_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl),
+ &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco2_clk", NULL);
clk_register_clkdev(clk1, "pll2_clk", NULL);
@@ -165,111 +164,111 @@
HCLK_RATIO_MASK, 0, &_lock);
clk_register_clkdev(clk, "ahb_clk", NULL);
- clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
- "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "uart_synth_clk", NULL);
- clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+ clk = clk_register_aux("uart_syn_clk", "uart_syn_gclk", "pll1_clk", 0,
+ UART_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "uart_syn_clk", NULL);
+ clk_register_clkdev(clk1, "uart_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "uart_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, PERIP_CLK_CFG,
UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "uart_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart_mclk", NULL);
- clk = clk_register_gate(NULL, "uart0", "uart_mux_clk", 0,
- PERIP1_CLK_ENB, UART0_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "uart0", "uart_mclk", 0, PERIP1_CLK_ENB,
+ UART0_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "d0000000.serial");
- clk = clk_register_gate(NULL, "uart1", "uart_mux_clk", 0,
- PERIP1_CLK_ENB, UART1_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "uart1", "uart_mclk", 0, PERIP1_CLK_ENB,
+ UART1_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "d0080000.serial");
- clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk",
- "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "firda_synth_clk", NULL);
- clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL);
+ clk = clk_register_aux("firda_syn_clk", "firda_syn_gclk", "pll1_clk",
+ 0, FIRDA_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "firda_syn_clk", NULL);
+ clk_register_clkdev(clk1, "firda_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents,
+ clk = clk_register_mux(NULL, "firda_mclk", firda_parents,
ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG,
FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "firda_mux_clk", NULL);
+ clk_register_clkdev(clk, "firda_mclk", NULL);
- clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0,
+ clk = clk_register_gate(NULL, "firda_clk", "firda_mclk", 0,
PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "firda");
- clk = clk_register_aux("clcd_synth_clk", "clcd_synth_gate_clk",
- "pll1_clk", 0, CLCD_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "clcd_synth_clk", NULL);
- clk_register_clkdev(clk1, "clcd_synth_gate_clk", NULL);
+ clk = clk_register_aux("clcd_syn_clk", "clcd_syn_gclk", "pll1_clk",
+ 0, CLCD_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "clcd_syn_clk", NULL);
+ clk_register_clkdev(clk1, "clcd_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "clcd_mux_clk", clcd_parents,
+ clk = clk_register_mux(NULL, "clcd_mclk", clcd_parents,
ARRAY_SIZE(clcd_parents), 0, PERIP_CLK_CFG,
CLCD_CLK_SHIFT, CLCD_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "clcd_mux_clk", NULL);
+ clk_register_clkdev(clk, "clcd_mclk", NULL);
- clk = clk_register_gate(NULL, "clcd_clk", "clcd_mux_clk", 0,
+ clk = clk_register_gate(NULL, "clcd_clk", "clcd_mclk", 0,
PERIP1_CLK_ENB, CLCD_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "clcd");
/* gpt clocks */
- clk = clk_register_gpt("gpt0_1_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
+ clk = clk_register_gpt("gpt0_1_syn_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
- clk_register_clkdev(clk, "gpt0_1_synth_clk", NULL);
+ clk_register_clkdev(clk, "gpt0_1_syn_clk", NULL);
- clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt0_1_parents,
+ clk = clk_register_mux(NULL, "gpt0_mclk", gpt0_1_parents,
ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG,
GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt0");
- clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt0_1_parents,
+ clk = clk_register_mux(NULL, "gpt1_mclk", gpt0_1_parents,
ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG,
GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+ clk_register_clkdev(clk, "gpt1_mclk", NULL);
- clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0,
PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt1");
- clk = clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
+ clk = clk_register_gpt("gpt2_syn_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
- clk_register_clkdev(clk, "gpt2_synth_clk", NULL);
+ clk_register_clkdev(clk, "gpt2_syn_clk", NULL);
- clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents,
+ clk = clk_register_mux(NULL, "gpt2_mclk", gpt2_parents,
ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG,
GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+ clk_register_clkdev(clk, "gpt2_mclk", NULL);
- clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0,
PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt2");
- clk = clk_register_gpt("gpt3_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
+ clk = clk_register_gpt("gpt3_syn_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
- clk_register_clkdev(clk, "gpt3_synth_clk", NULL);
+ clk_register_clkdev(clk, "gpt3_syn_clk", NULL);
- clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt3_parents,
+ clk = clk_register_mux(NULL, "gpt3_mclk", gpt3_parents,
ARRAY_SIZE(gpt3_parents), 0, PERIP_CLK_CFG,
GPT3_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
+ clk_register_clkdev(clk, "gpt3_mclk", NULL);
- clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mclk", 0,
PERIP1_CLK_ENB, GPT3_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt3");
/* clock derived from pll3 clk */
- clk = clk_register_gate(NULL, "usbh0_clk", "pll3_48m_clk", 0,
+ clk = clk_register_gate(NULL, "usbh0_clk", "pll3_clk", 0,
PERIP1_CLK_ENB, USBH0_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "usbh.0_clk");
- clk = clk_register_gate(NULL, "usbh1_clk", "pll3_48m_clk", 0,
+ clk = clk_register_gate(NULL, "usbh1_clk", "pll3_clk", 0,
PERIP1_CLK_ENB, USBH1_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "usbh.1_clk");
- clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0,
- PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "usbd_clk", "pll3_clk", 0, PERIP1_CLK_ENB,
+ USBD_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "designware_udc");
/* clock derived from ahb clk */
@@ -278,9 +277,8 @@
clk_register_clkdev(clk, "ahbmult2_clk", NULL);
clk = clk_register_mux(NULL, "ddr_clk", ddr_parents,
- ARRAY_SIZE(ddr_parents),
- 0, PLL_CLK_CFG, MCTR_CLK_SHIFT, MCTR_CLK_MASK, 0,
- &_lock);
+ ARRAY_SIZE(ddr_parents), 0, PLL_CLK_CFG, MCTR_CLK_SHIFT,
+ MCTR_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, "ddr_clk", NULL);
clk = clk_register_divider(NULL, "apb_clk", "ahb_clk",
@@ -298,7 +296,7 @@
clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
GMAC_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, NULL, "gmac");
+ clk_register_clkdev(clk, NULL, "e0800000.ethernet");
clk = clk_register_gate(NULL, "i2c_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
I2C_CLK_ENB, 0, &_lock);
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 99c6b20..d53cd0a 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -16,6 +16,12 @@
config DW_APB_TIMER
bool
+config DW_APB_TIMER_OF
+ bool
+
+config ARMADA_370_XP_TIMER
+ bool
+
config CLKSRC_DBX500_PRCMU
bool "Clocksource PRCMU Timer"
depends on UX500_SOC_DB8500
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index dd3e661..b65d0c5 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -10,4 +10,6 @@
obj-$(CONFIG_CLKBLD_I8253) += i8253.o
obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
-obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
\ No newline at end of file
+obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o
+obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
+obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o
diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
new file mode 100644
index 0000000..f7dba5b
--- /dev/null
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2012 Altera Corporation
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * Modified from mach-picoxcell/time.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/dw_apb_timer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/mach/time.h>
+#include <asm/sched_clock.h>
+
+static void timer_get_base_and_rate(struct device_node *np,
+ void __iomem **base, u32 *rate)
+{
+ *base = of_iomap(np, 0);
+
+ if (!*base)
+ panic("Unable to map regs for %s", np->name);
+
+ if (of_property_read_u32(np, "clock-freq", rate) &&
+ of_property_read_u32(np, "clock-frequency", rate))
+ panic("No clock-frequency property for %s", np->name);
+}
+
+static void add_clockevent(struct device_node *event_timer)
+{
+ void __iomem *iobase;
+ struct dw_apb_clock_event_device *ced;
+ u32 irq, rate;
+
+ irq = irq_of_parse_and_map(event_timer, 0);
+ if (irq == NO_IRQ)
+ panic("No IRQ for clock event timer");
+
+ timer_get_base_and_rate(event_timer, &iobase, &rate);
+
+ ced = dw_apb_clockevent_init(0, event_timer->name, 300, iobase, irq,
+ rate);
+ if (!ced)
+ panic("Unable to initialise clockevent device");
+
+ dw_apb_clockevent_register(ced);
+}
+
+static void add_clocksource(struct device_node *source_timer)
+{
+ void __iomem *iobase;
+ struct dw_apb_clocksource *cs;
+ u32 rate;
+
+ timer_get_base_and_rate(source_timer, &iobase, &rate);
+
+ cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate);
+ if (!cs)
+ panic("Unable to initialise clocksource device");
+
+ dw_apb_clocksource_start(cs);
+ dw_apb_clocksource_register(cs);
+}
+
+static void __iomem *sched_io_base;
+
+static u32 read_sched_clock(void)
+{
+ return __raw_readl(sched_io_base);
+}
+
+static const struct of_device_id sptimer_ids[] __initconst = {
+ { .compatible = "picochip,pc3x2-rtc" },
+ { .compatible = "snps,dw-apb-timer-sp" },
+ { /* Sentinel */ },
+};
+
+static void init_sched_clock(void)
+{
+ struct device_node *sched_timer;
+ u32 rate;
+
+ sched_timer = of_find_matching_node(NULL, sptimer_ids);
+ if (!sched_timer)
+ panic("No RTC for sched clock to use");
+
+ timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
+ of_node_put(sched_timer);
+
+ setup_sched_clock(read_sched_clock, 32, rate);
+}
+
+static const struct of_device_id osctimer_ids[] __initconst = {
+ { .compatible = "picochip,pc3x2-timer" },
+ { .compatible = "snps,dw-apb-timer-osc" },
+ {},
+};
+
+static void __init timer_init(void)
+{
+ struct device_node *event_timer, *source_timer;
+
+ event_timer = of_find_matching_node(NULL, osctimer_ids);
+ if (!event_timer)
+ panic("No timer for clockevent");
+ add_clockevent(event_timer);
+
+ source_timer = of_find_matching_node(event_timer, osctimer_ids);
+ if (!source_timer)
+ panic("No timer for clocksource");
+ add_clocksource(source_timer);
+
+ of_node_put(source_timer);
+
+ init_sched_clock();
+}
+
+struct sys_timer dw_apb_timer = {
+ .init = timer_init,
+};
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 32fe9ef..98b06ba 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -48,13 +48,13 @@
unsigned long next_match_value;
unsigned long max_match_value;
unsigned long rate;
- spinlock_t lock;
+ raw_spinlock_t lock;
struct clock_event_device ced;
struct clocksource cs;
unsigned long total_cycles;
};
-static DEFINE_SPINLOCK(sh_cmt_lock);
+static DEFINE_RAW_SPINLOCK(sh_cmt_lock);
#define CMSTR -1 /* shared register */
#define CMCSR 0 /* channel register */
@@ -139,7 +139,7 @@
unsigned long flags, value;
/* start stop register shared by multiple timer channels */
- spin_lock_irqsave(&sh_cmt_lock, flags);
+ raw_spin_lock_irqsave(&sh_cmt_lock, flags);
value = sh_cmt_read(p, CMSTR);
if (start)
@@ -148,7 +148,7 @@
value &= ~(1 << cfg->timer_bit);
sh_cmt_write(p, CMSTR, value);
- spin_unlock_irqrestore(&sh_cmt_lock, flags);
+ raw_spin_unlock_irqrestore(&sh_cmt_lock, flags);
}
static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate)
@@ -328,9 +328,9 @@
{
unsigned long flags;
- spin_lock_irqsave(&p->lock, flags);
+ raw_spin_lock_irqsave(&p->lock, flags);
__sh_cmt_set_next(p, delta);
- spin_unlock_irqrestore(&p->lock, flags);
+ raw_spin_unlock_irqrestore(&p->lock, flags);
}
static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id)
@@ -385,7 +385,7 @@
int ret = 0;
unsigned long flags;
- spin_lock_irqsave(&p->lock, flags);
+ raw_spin_lock_irqsave(&p->lock, flags);
if (!(p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE)))
ret = sh_cmt_enable(p, &p->rate);
@@ -398,7 +398,7 @@
if ((flag == FLAG_CLOCKSOURCE) && (!(p->flags & FLAG_CLOCKEVENT)))
__sh_cmt_set_next(p, p->max_match_value);
out:
- spin_unlock_irqrestore(&p->lock, flags);
+ raw_spin_unlock_irqrestore(&p->lock, flags);
return ret;
}
@@ -408,7 +408,7 @@
unsigned long flags;
unsigned long f;
- spin_lock_irqsave(&p->lock, flags);
+ raw_spin_lock_irqsave(&p->lock, flags);
f = p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE);
p->flags &= ~flag;
@@ -420,7 +420,7 @@
if ((flag == FLAG_CLOCKEVENT) && (p->flags & FLAG_CLOCKSOURCE))
__sh_cmt_set_next(p, p->max_match_value);
- spin_unlock_irqrestore(&p->lock, flags);
+ raw_spin_unlock_irqrestore(&p->lock, flags);
}
static struct sh_cmt_priv *cs_to_sh_cmt(struct clocksource *cs)
@@ -435,13 +435,13 @@
unsigned long value;
int has_wrapped;
- spin_lock_irqsave(&p->lock, flags);
+ raw_spin_lock_irqsave(&p->lock, flags);
value = p->total_cycles;
raw = sh_cmt_get_counter(p, &has_wrapped);
if (unlikely(has_wrapped))
raw += p->match_value + 1;
- spin_unlock_irqrestore(&p->lock, flags);
+ raw_spin_unlock_irqrestore(&p->lock, flags);
return value + raw;
}
@@ -591,7 +591,7 @@
p->max_match_value = (1 << p->width) - 1;
p->match_value = p->max_match_value;
- spin_lock_init(&p->lock);
+ raw_spin_lock_init(&p->lock);
if (clockevent_rating)
sh_cmt_register_clockevent(p, name, clockevent_rating);
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index a2172f6..d9b76ca 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -43,7 +43,7 @@
struct clock_event_device ced;
};
-static DEFINE_SPINLOCK(sh_mtu2_lock);
+static DEFINE_RAW_SPINLOCK(sh_mtu2_lock);
#define TSTR -1 /* shared register */
#define TCR 0 /* channel register */
@@ -107,7 +107,7 @@
unsigned long flags, value;
/* start stop register shared by multiple timer channels */
- spin_lock_irqsave(&sh_mtu2_lock, flags);
+ raw_spin_lock_irqsave(&sh_mtu2_lock, flags);
value = sh_mtu2_read(p, TSTR);
if (start)
@@ -116,7 +116,7 @@
value &= ~(1 << cfg->timer_bit);
sh_mtu2_write(p, TSTR, value);
- spin_unlock_irqrestore(&sh_mtu2_lock, flags);
+ raw_spin_unlock_irqrestore(&sh_mtu2_lock, flags);
}
static int sh_mtu2_enable(struct sh_mtu2_priv *p)
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 97f54b6..c1b51d4 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -45,7 +45,7 @@
struct clocksource cs;
};
-static DEFINE_SPINLOCK(sh_tmu_lock);
+static DEFINE_RAW_SPINLOCK(sh_tmu_lock);
#define TSTR -1 /* shared register */
#define TCOR 0 /* channel register */
@@ -95,7 +95,7 @@
unsigned long flags, value;
/* start stop register shared by multiple timer channels */
- spin_lock_irqsave(&sh_tmu_lock, flags);
+ raw_spin_lock_irqsave(&sh_tmu_lock, flags);
value = sh_tmu_read(p, TSTR);
if (start)
@@ -104,7 +104,7 @@
value &= ~(1 << cfg->timer_bit);
sh_tmu_write(p, TSTR, value);
- spin_unlock_irqrestore(&sh_tmu_lock, flags);
+ raw_spin_unlock_irqrestore(&sh_tmu_lock, flags);
}
static int sh_tmu_enable(struct sh_tmu_priv *p)
@@ -245,12 +245,7 @@
sh_tmu_enable(p);
- /* TODO: calculate good shift from rate and counter bit width */
-
- ced->shift = 32;
- ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift);
- ced->max_delta_ns = clockevent_delta2ns(0xffffffff, ced);
- ced->min_delta_ns = 5000;
+ clockevents_config(ced, p->rate);
if (periodic) {
p->periodic = (p->rate + HZ/2) / HZ;
@@ -323,7 +318,8 @@
ced->set_mode = sh_tmu_clock_event_mode;
dev_info(&p->pdev->dev, "used for clock events\n");
- clockevents_register_device(ced);
+
+ clockevents_config_and_register(ced, 1, 0x300, 0xffffffff);
ret = setup_irq(p->irqaction.irq, &p->irqaction);
if (ret) {
diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
new file mode 100644
index 0000000..4674f94
--- /dev/null
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -0,0 +1,226 @@
+/*
+ * Marvell Armada 370/XP SoC timer handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Timer 0 is used as free-running clocksource, while timer 1 is
+ * used as clock_event_device.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <asm/sched_clock.h>
+
+/*
+ * Timer block registers.
+ */
+#define TIMER_CTRL_OFF 0x0000
+#define TIMER0_EN 0x0001
+#define TIMER0_RELOAD_EN 0x0002
+#define TIMER0_25MHZ 0x0800
+#define TIMER0_DIV(div) ((div) << 19)
+#define TIMER1_EN 0x0004
+#define TIMER1_RELOAD_EN 0x0008
+#define TIMER1_25MHZ 0x1000
+#define TIMER1_DIV(div) ((div) << 22)
+#define TIMER_EVENTS_STATUS 0x0004
+#define TIMER0_CLR_MASK (~0x1)
+#define TIMER1_CLR_MASK (~0x100)
+#define TIMER0_RELOAD_OFF 0x0010
+#define TIMER0_VAL_OFF 0x0014
+#define TIMER1_RELOAD_OFF 0x0018
+#define TIMER1_VAL_OFF 0x001c
+
+/* Global timers are connected to the coherency fabric clock, and the
+ below divider reduces their incrementing frequency. */
+#define TIMER_DIVIDER_SHIFT 5
+#define TIMER_DIVIDER (1 << TIMER_DIVIDER_SHIFT)
+
+/*
+ * SoC-specific data.
+ */
+static void __iomem *timer_base;
+static int timer_irq;
+
+/*
+ * Number of timer ticks per jiffy.
+ */
+static u32 ticks_per_jiffy;
+
+static u32 notrace armada_370_xp_read_sched_clock(void)
+{
+ return ~readl(timer_base + TIMER0_VAL_OFF);
+}
+
+/*
+ * Clockevent handling.
+ */
+static int
+armada_370_xp_clkevt_next_event(unsigned long delta,
+ struct clock_event_device *dev)
+{
+ u32 u;
+
+ /*
+ * Clear clockevent timer interrupt.
+ */
+ writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
+
+ /*
+ * Setup new clockevent timer value.
+ */
+ writel(delta, timer_base + TIMER1_VAL_OFF);
+
+ /*
+ * Enable the timer.
+ */
+ u = readl(timer_base + TIMER_CTRL_OFF);
+ u = ((u & ~TIMER1_RELOAD_EN) | TIMER1_EN |
+ TIMER1_DIV(TIMER_DIVIDER_SHIFT));
+ writel(u, timer_base + TIMER_CTRL_OFF);
+
+ return 0;
+}
+
+static void
+armada_370_xp_clkevt_mode(enum clock_event_mode mode,
+ struct clock_event_device *dev)
+{
+ u32 u;
+
+ if (mode == CLOCK_EVT_MODE_PERIODIC) {
+ /*
+ * Setup timer to fire at 1/HZ intervals.
+ */
+ writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF);
+ writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF);
+
+ /*
+ * Enable timer.
+ */
+ u = readl(timer_base + TIMER_CTRL_OFF);
+
+ writel((u | TIMER1_EN | TIMER1_RELOAD_EN |
+ TIMER1_DIV(TIMER_DIVIDER_SHIFT)),
+ timer_base + TIMER_CTRL_OFF);
+ } else {
+ /*
+ * Disable timer.
+ */
+ u = readl(timer_base + TIMER_CTRL_OFF);
+ writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF);
+
+ /*
+ * ACK pending timer interrupt.
+ */
+ writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
+
+ }
+}
+
+static struct clock_event_device armada_370_xp_clkevt = {
+ .name = "armada_370_xp_tick",
+ .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+ .shift = 32,
+ .rating = 300,
+ .set_next_event = armada_370_xp_clkevt_next_event,
+ .set_mode = armada_370_xp_clkevt_mode,
+};
+
+static irqreturn_t armada_370_xp_timer_interrupt(int irq, void *dev_id)
+{
+ /*
+ * ACK timer interrupt and call event handler.
+ */
+
+ writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
+ armada_370_xp_clkevt.event_handler(&armada_370_xp_clkevt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction armada_370_xp_timer_irq = {
+ .name = "armada_370_xp_tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = armada_370_xp_timer_interrupt
+};
+
+void __init armada_370_xp_timer_init(void)
+{
+ u32 u;
+ struct device_node *np;
+ unsigned int timer_clk;
+ int ret;
+ np = of_find_compatible_node(NULL, NULL, "marvell,armada-370-xp-timer");
+ timer_base = of_iomap(np, 0);
+ WARN_ON(!timer_base);
+
+ if (of_find_property(np, "marvell,timer-25Mhz", NULL)) {
+ /* The fixed 25MHz timer is available so let's use it */
+ u = readl(timer_base + TIMER_CTRL_OFF);
+ writel(u | TIMER0_25MHZ | TIMER1_25MHZ,
+ timer_base + TIMER_CTRL_OFF);
+ timer_clk = 25000000;
+ } else {
+ u32 clk = 0;
+ ret = of_property_read_u32(np, "clock-frequency", &clk);
+ WARN_ON(!clk || ret < 0);
+ u = readl(timer_base + TIMER_CTRL_OFF);
+ writel(u & ~(TIMER0_25MHZ | TIMER1_25MHZ),
+ timer_base + TIMER_CTRL_OFF);
+ timer_clk = clk / TIMER_DIVIDER;
+ }
+
+ /* We use timer 0 as clocksource, and timer 1 for
+ clockevents */
+ timer_irq = irq_of_parse_and_map(np, 1);
+
+ ticks_per_jiffy = (timer_clk + HZ / 2) / HZ;
+
+ /*
+ * Set scale and timer for sched_clock.
+ */
+ setup_sched_clock(armada_370_xp_read_sched_clock, 32, timer_clk);
+
+ /*
+ * Setup free-running clocksource timer (interrupts
+ * disabled).
+ */
+ writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
+ writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
+
+ u = readl(timer_base + TIMER_CTRL_OFF);
+
+ writel((u | TIMER0_EN | TIMER0_RELOAD_EN |
+ TIMER0_DIV(TIMER_DIVIDER_SHIFT)), timer_base + TIMER_CTRL_OFF);
+
+ clocksource_mmio_init(timer_base + TIMER0_VAL_OFF,
+ "armada_370_xp_clocksource",
+ timer_clk, 300, 32, clocksource_mmio_readl_down);
+
+ /*
+ * Setup clockevent timer (interrupt-driven).
+ */
+ setup_irq(timer_irq, &armada_370_xp_timer_irq);
+ armada_370_xp_clkevt.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&armada_370_xp_clkevt,
+ timer_clk, 1, 0xfffffffe);
+}
+
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 7f2f149..fb8a527 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -138,7 +138,7 @@
static LIST_HEAD(cpufreq_governor_list);
static DEFINE_MUTEX(cpufreq_governor_mutex);
-struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu)
+static struct cpufreq_policy *__cpufreq_cpu_get(unsigned int cpu, bool sysfs)
{
struct cpufreq_policy *data;
unsigned long flags;
@@ -162,7 +162,7 @@
if (!data)
goto err_out_put_module;
- if (!kobject_get(&data->kobj))
+ if (!sysfs && !kobject_get(&data->kobj))
goto err_out_put_module;
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
@@ -175,16 +175,35 @@
err_out:
return NULL;
}
+
+struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu)
+{
+ return __cpufreq_cpu_get(cpu, false);
+}
EXPORT_SYMBOL_GPL(cpufreq_cpu_get);
+static struct cpufreq_policy *cpufreq_cpu_get_sysfs(unsigned int cpu)
+{
+ return __cpufreq_cpu_get(cpu, true);
+}
+
+static void __cpufreq_cpu_put(struct cpufreq_policy *data, bool sysfs)
+{
+ if (!sysfs)
+ kobject_put(&data->kobj);
+ module_put(cpufreq_driver->owner);
+}
void cpufreq_cpu_put(struct cpufreq_policy *data)
{
- kobject_put(&data->kobj);
- module_put(cpufreq_driver->owner);
+ __cpufreq_cpu_put(data, false);
}
EXPORT_SYMBOL_GPL(cpufreq_cpu_put);
+static void cpufreq_cpu_put_sysfs(struct cpufreq_policy *data)
+{
+ __cpufreq_cpu_put(data, true);
+}
/*********************************************************************
* EXTERNALLY AFFECTING FREQUENCY CHANGES *
@@ -617,7 +636,7 @@
struct cpufreq_policy *policy = to_policy(kobj);
struct freq_attr *fattr = to_attr(attr);
ssize_t ret = -EINVAL;
- policy = cpufreq_cpu_get(policy->cpu);
+ policy = cpufreq_cpu_get_sysfs(policy->cpu);
if (!policy)
goto no_policy;
@@ -631,7 +650,7 @@
unlock_policy_rwsem_read(policy->cpu);
fail:
- cpufreq_cpu_put(policy);
+ cpufreq_cpu_put_sysfs(policy);
no_policy:
return ret;
}
@@ -642,7 +661,7 @@
struct cpufreq_policy *policy = to_policy(kobj);
struct freq_attr *fattr = to_attr(attr);
ssize_t ret = -EINVAL;
- policy = cpufreq_cpu_get(policy->cpu);
+ policy = cpufreq_cpu_get_sysfs(policy->cpu);
if (!policy)
goto no_policy;
@@ -656,7 +675,7 @@
unlock_policy_rwsem_write(policy->cpu);
fail:
- cpufreq_cpu_put(policy);
+ cpufreq_cpu_put_sysfs(policy);
no_policy:
return ret;
}
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index b243a7e..af2d81e 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -62,8 +62,18 @@
goto out;
}
- if (cpufreq_frequency_table_target(policy, freq_table,
- freqs.old, relation, &old_index)) {
+ /*
+ * The policy max have been changed so that we cannot get proper
+ * old_index with cpufreq_frequency_table_target(). Thus, ignore
+ * policy and get the index from the raw freqeuncy table.
+ */
+ for (old_index = 0;
+ freq_table[old_index].frequency != CPUFREQ_TABLE_END;
+ old_index++)
+ if (freq_table[old_index].frequency == freqs.old)
+ break;
+
+ if (freq_table[old_index].frequency == CPUFREQ_TABLE_END) {
ret = -EINVAL;
goto out;
}
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index d90519c..d6a533e 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -201,6 +201,22 @@
EXPORT_SYMBOL_GPL(cpuidle_resume_and_unlock);
+/* Currently used in suspend/resume path to suspend cpuidle */
+void cpuidle_pause(void)
+{
+ mutex_lock(&cpuidle_lock);
+ cpuidle_uninstall_idle_handler();
+ mutex_unlock(&cpuidle_lock);
+}
+
+/* Currently used in suspend/resume path to resume cpuidle */
+void cpuidle_resume(void)
+{
+ mutex_lock(&cpuidle_lock);
+ cpuidle_install_idle_handler();
+ mutex_unlock(&cpuidle_lock);
+}
+
/**
* cpuidle_wrap_enter - performs timekeeping and irqen around enter function
* @dev: pointer to a valid cpuidle_device object
@@ -265,7 +281,7 @@
state->power_usage = -1;
state->flags = 0;
state->enter = poll_idle;
- state->disable = 0;
+ state->disabled = false;
}
#else
static void poll_idle_init(struct cpuidle_driver *drv) {}
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index 40cd3f3..58bf3b1 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -16,6 +16,7 @@
static struct cpuidle_driver *cpuidle_curr_driver;
DEFINE_SPINLOCK(cpuidle_driver_lock);
+int cpuidle_driver_refcount;
static void __cpuidle_register_driver(struct cpuidle_driver *drv)
{
@@ -89,8 +90,34 @@
}
spin_lock(&cpuidle_driver_lock);
- cpuidle_curr_driver = NULL;
+
+ if (!WARN_ON(cpuidle_driver_refcount > 0))
+ cpuidle_curr_driver = NULL;
+
spin_unlock(&cpuidle_driver_lock);
}
EXPORT_SYMBOL_GPL(cpuidle_unregister_driver);
+
+struct cpuidle_driver *cpuidle_driver_ref(void)
+{
+ struct cpuidle_driver *drv;
+
+ spin_lock(&cpuidle_driver_lock);
+
+ drv = cpuidle_curr_driver;
+ cpuidle_driver_refcount++;
+
+ spin_unlock(&cpuidle_driver_lock);
+ return drv;
+}
+
+void cpuidle_driver_unref(void)
+{
+ spin_lock(&cpuidle_driver_lock);
+
+ if (!WARN_ON(cpuidle_driver_refcount <= 0))
+ cpuidle_driver_refcount--;
+
+ spin_unlock(&cpuidle_driver_lock);
+}
diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index 0633575..5b1f2c3 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -281,7 +281,8 @@
* unless the timer is happening really really soon.
*/
if (data->expected_us > 5 &&
- drv->states[CPUIDLE_DRIVER_STATE_START].disable == 0)
+ !drv->states[CPUIDLE_DRIVER_STATE_START].disabled &&
+ dev->states_usage[CPUIDLE_DRIVER_STATE_START].disable == 0)
data->last_state_idx = CPUIDLE_DRIVER_STATE_START;
/*
@@ -290,8 +291,9 @@
*/
for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) {
struct cpuidle_state *s = &drv->states[i];
+ struct cpuidle_state_usage *su = &dev->states_usage[i];
- if (s->disable)
+ if (s->disabled || su->disable)
continue;
if (s->target_residency > data->predicted_us)
continue;
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index 88032b4..5f809e3 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -217,7 +217,8 @@
struct attribute attr;
ssize_t (*show)(struct cpuidle_state *, \
struct cpuidle_state_usage *, char *);
- ssize_t (*store)(struct cpuidle_state *, const char *, size_t);
+ ssize_t (*store)(struct cpuidle_state *, \
+ struct cpuidle_state_usage *, const char *, size_t);
};
#define define_one_state_ro(_name, show) \
@@ -233,21 +234,22 @@
return sprintf(buf, "%u\n", state->_name);\
}
-#define define_store_state_function(_name) \
+#define define_store_state_ull_function(_name) \
static ssize_t store_state_##_name(struct cpuidle_state *state, \
+ struct cpuidle_state_usage *state_usage, \
const char *buf, size_t size) \
{ \
- long value; \
+ unsigned long long value; \
int err; \
if (!capable(CAP_SYS_ADMIN)) \
return -EPERM; \
- err = kstrtol(buf, 0, &value); \
+ err = kstrtoull(buf, 0, &value); \
if (err) \
return err; \
if (value) \
- state->disable = 1; \
+ state_usage->_name = 1; \
else \
- state->disable = 0; \
+ state_usage->_name = 0; \
return size; \
}
@@ -273,8 +275,8 @@
define_show_state_ull_function(time)
define_show_state_str_function(name)
define_show_state_str_function(desc)
-define_show_state_function(disable)
-define_store_state_function(disable)
+define_show_state_ull_function(disable)
+define_store_state_ull_function(disable)
define_one_state_ro(name, show_state_name);
define_one_state_ro(desc, show_state_desc);
@@ -318,10 +320,11 @@
{
int ret = -EIO;
struct cpuidle_state *state = kobj_to_state(kobj);
+ struct cpuidle_state_usage *state_usage = kobj_to_state_usage(kobj);
struct cpuidle_state_attr *cattr = attr_to_stateattr(attr);
if (cattr->store)
- ret = cattr->store(state, buf, size);
+ ret = cattr->store(state, state_usage, buf, size);
return ret;
}
diff --git a/drivers/crypto/tegra-aes.c b/drivers/crypto/tegra-aes.c
index 422a976..ac236f6 100644
--- a/drivers/crypto/tegra-aes.c
+++ b/drivers/crypto/tegra-aes.c
@@ -572,7 +572,7 @@
struct tegra_aes_dev *dd = aes_dev;
int ret;
- ret = clk_enable(dd->aes_clk);
+ ret = clk_prepare_enable(dd->aes_clk);
if (ret)
BUG_ON("clock enable failed");
@@ -581,7 +581,7 @@
ret = tegra_aes_handle_req(dd);
} while (!ret);
- clk_disable(dd->aes_clk);
+ clk_disable_unprepare(dd->aes_clk);
}
static irqreturn_t aes_irq(int irq, void *dev_id)
@@ -673,7 +673,7 @@
/* take mutex to access the aes hw */
mutex_lock(&aes_lock);
- ret = clk_enable(dd->aes_clk);
+ ret = clk_prepare_enable(dd->aes_clk);
if (ret)
return ret;
@@ -700,7 +700,7 @@
}
out:
- clk_disable(dd->aes_clk);
+ clk_disable_unprepare(dd->aes_clk);
mutex_unlock(&aes_lock);
dev_dbg(dd->dev, "%s: done\n", __func__);
@@ -758,7 +758,7 @@
dd->flags = FLAGS_ENCRYPT | FLAGS_RNG;
- ret = clk_enable(dd->aes_clk);
+ ret = clk_prepare_enable(dd->aes_clk);
if (ret)
return ret;
@@ -788,7 +788,7 @@
memcpy(dd->dt, dt, DEFAULT_RNG_BLK_SZ);
out:
- clk_disable(dd->aes_clk);
+ clk_disable_unprepare(dd->aes_clk);
mutex_unlock(&aes_lock);
dev_dbg(dd->dev, "%s: done\n", __func__);
diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c
index 7cac127..1c307e1 100644
--- a/drivers/crypto/ux500/cryp/cryp_core.c
+++ b/drivers/crypto/ux500/cryp/cryp_core.c
@@ -1661,27 +1661,26 @@
}
-static int ux500_cryp_suspend(struct platform_device *pdev, pm_message_t state)
+static int ux500_cryp_suspend(struct device *dev)
{
int ret;
+ struct platform_device *pdev = to_platform_device(dev);
struct cryp_device_data *device_data;
struct resource *res_irq;
struct cryp_ctx *temp_ctx = NULL;
- dev_dbg(&pdev->dev, "[%s]", __func__);
+ dev_dbg(dev, "[%s]", __func__);
/* Handle state? */
device_data = platform_get_drvdata(pdev);
if (!device_data) {
- dev_err(&pdev->dev, "[%s]: platform_get_drvdata() failed!",
- __func__);
+ dev_err(dev, "[%s]: platform_get_drvdata() failed!", __func__);
return -ENOMEM;
}
res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res_irq)
- dev_err(&pdev->dev, "[%s]: IORESOURCE_IRQ, unavailable",
- __func__);
+ dev_err(dev, "[%s]: IORESOURCE_IRQ, unavailable", __func__);
else
disable_irq(res_irq->start);
@@ -1692,32 +1691,32 @@
if (device_data->current_ctx == ++temp_ctx) {
if (down_interruptible(&driver_data.device_allocation))
- dev_dbg(&pdev->dev, "[%s]: down_interruptible() "
- "failed", __func__);
- ret = cryp_disable_power(&pdev->dev, device_data, false);
+ dev_dbg(dev, "[%s]: down_interruptible() failed",
+ __func__);
+ ret = cryp_disable_power(dev, device_data, false);
} else
- ret = cryp_disable_power(&pdev->dev, device_data, true);
+ ret = cryp_disable_power(dev, device_data, true);
if (ret)
- dev_err(&pdev->dev, "[%s]: cryp_disable_power()", __func__);
+ dev_err(dev, "[%s]: cryp_disable_power()", __func__);
return ret;
}
-static int ux500_cryp_resume(struct platform_device *pdev)
+static int ux500_cryp_resume(struct device *dev)
{
int ret = 0;
+ struct platform_device *pdev = to_platform_device(dev);
struct cryp_device_data *device_data;
struct resource *res_irq;
struct cryp_ctx *temp_ctx = NULL;
- dev_dbg(&pdev->dev, "[%s]", __func__);
+ dev_dbg(dev, "[%s]", __func__);
device_data = platform_get_drvdata(pdev);
if (!device_data) {
- dev_err(&pdev->dev, "[%s]: platform_get_drvdata() failed!",
- __func__);
+ dev_err(dev, "[%s]: platform_get_drvdata() failed!", __func__);
return -ENOMEM;
}
@@ -1730,11 +1729,10 @@
if (!device_data->current_ctx)
up(&driver_data.device_allocation);
else
- ret = cryp_enable_power(&pdev->dev, device_data, true);
+ ret = cryp_enable_power(dev, device_data, true);
if (ret)
- dev_err(&pdev->dev, "[%s]: cryp_enable_power() failed!",
- __func__);
+ dev_err(dev, "[%s]: cryp_enable_power() failed!", __func__);
else {
res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res_irq)
@@ -1744,15 +1742,16 @@
return ret;
}
+static SIMPLE_DEV_PM_OPS(ux500_cryp_pm, ux500_cryp_suspend, ux500_cryp_resume);
+
static struct platform_driver cryp_driver = {
.probe = ux500_cryp_probe,
.remove = ux500_cryp_remove,
.shutdown = ux500_cryp_shutdown,
- .suspend = ux500_cryp_suspend,
- .resume = ux500_cryp_resume,
.driver = {
.owner = THIS_MODULE,
.name = "cryp1"
+ .pm = &ux500_cryp_pm,
}
};
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 6dbb9ec..08d5032 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -1894,19 +1894,17 @@
/**
* ux500_hash_suspend - Function that suspends the hash device.
- * @pdev: The platform device.
- * @state: -
+ * @dev: Device to suspend.
*/
-static int ux500_hash_suspend(struct platform_device *pdev, pm_message_t state)
+static int ux500_hash_suspend(struct device *dev)
{
int ret;
struct hash_device_data *device_data;
struct hash_ctx *temp_ctx = NULL;
- device_data = platform_get_drvdata(pdev);
+ device_data = dev_get_drvdata(dev);
if (!device_data) {
- dev_err(&pdev->dev, "[%s] platform_get_drvdata() failed!",
- __func__);
+ dev_err(dev, "[%s] platform_get_drvdata() failed!", __func__);
return -ENOMEM;
}
@@ -1917,33 +1915,32 @@
if (device_data->current_ctx == ++temp_ctx) {
if (down_interruptible(&driver_data.device_allocation))
- dev_dbg(&pdev->dev, "[%s]: down_interruptible() "
- "failed", __func__);
+ dev_dbg(dev, "[%s]: down_interruptible() failed",
+ __func__);
ret = hash_disable_power(device_data, false);
} else
ret = hash_disable_power(device_data, true);
if (ret)
- dev_err(&pdev->dev, "[%s]: hash_disable_power()", __func__);
+ dev_err(dev, "[%s]: hash_disable_power()", __func__);
return ret;
}
/**
* ux500_hash_resume - Function that resume the hash device.
- * @pdev: The platform device.
+ * @dev: Device to resume.
*/
-static int ux500_hash_resume(struct platform_device *pdev)
+static int ux500_hash_resume(struct device *dev)
{
int ret = 0;
struct hash_device_data *device_data;
struct hash_ctx *temp_ctx = NULL;
- device_data = platform_get_drvdata(pdev);
+ device_data = dev_get_drvdata(dev);
if (!device_data) {
- dev_err(&pdev->dev, "[%s] platform_get_drvdata() failed!",
- __func__);
+ dev_err(dev, "[%s] platform_get_drvdata() failed!", __func__);
return -ENOMEM;
}
@@ -1958,21 +1955,21 @@
ret = hash_enable_power(device_data, true);
if (ret)
- dev_err(&pdev->dev, "[%s]: hash_enable_power() failed!",
- __func__);
+ dev_err(dev, "[%s]: hash_enable_power() failed!", __func__);
return ret;
}
+static SIMPLE_DEV_PM_OPS(ux500_hash_pm, ux500_hash_suspend, ux500_hash_resume);
+
static struct platform_driver hash_driver = {
.probe = ux500_hash_probe,
.remove = ux500_hash_remove,
.shutdown = ux500_hash_shutdown,
- .suspend = ux500_hash_suspend,
- .resume = ux500_hash_resume,
.driver = {
.owner = THIS_MODULE,
.name = "hash1",
+ .pm = &ux500_hash_pm,
}
};
diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
index e23dc82..7212961 100644
--- a/drivers/dma/dw_dmac.c
+++ b/drivers/dma/dw_dmac.c
@@ -1626,4 +1626,4 @@
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index fb4f499..1dc2a4a 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -815,8 +815,6 @@
init_completion(&sdmac->done);
- sdmac->buf_tail = 0;
-
return 0;
out:
@@ -927,6 +925,8 @@
sdmac->flags = 0;
+ sdmac->buf_tail = 0;
+
dev_dbg(sdma->dev, "setting up %d entries for channel %d.\n",
sg_len, channel);
@@ -1027,6 +1027,8 @@
sdmac->status = DMA_IN_PROGRESS;
+ sdmac->buf_tail = 0;
+
sdmac->flags |= IMX_DMA_SG_LOOP;
sdmac->direction = direction;
ret = sdma_load_context(sdmac);
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index 5ec7204..c7573e5 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -1663,7 +1663,6 @@
static int __init ipu_probe(struct platform_device *pdev)
{
- struct ipu_platform_data *pdata = pdev->dev.platform_data;
struct resource *mem_ipu, *mem_ic;
int ret;
@@ -1671,7 +1670,7 @@
mem_ipu = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mem_ic = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!pdata || !mem_ipu || !mem_ic)
+ if (!mem_ipu || !mem_ic)
return -EINVAL;
ipu_data.dev = &pdev->dev;
@@ -1688,10 +1687,9 @@
goto err_noirq;
ipu_data.irq_err = ret;
- ipu_data.irq_base = pdata->irq_base;
- dev_dbg(&pdev->dev, "fn irq %u, err irq %u, irq-base %u\n",
- ipu_data.irq_fn, ipu_data.irq_err, ipu_data.irq_base);
+ dev_dbg(&pdev->dev, "fn irq %u, err irq %u\n",
+ ipu_data.irq_fn, ipu_data.irq_err);
/* Remap IPU common registers */
ipu_data.reg_ipu = ioremap(mem_ipu->start, resource_size(mem_ipu));
diff --git a/drivers/dma/ipu/ipu_irq.c b/drivers/dma/ipu/ipu_irq.c
index a71f55e..fa95bcc 100644
--- a/drivers/dma/ipu/ipu_irq.c
+++ b/drivers/dma/ipu/ipu_irq.c
@@ -14,6 +14,7 @@
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <mach/ipu.h>
@@ -354,10 +355,12 @@
/* Install the IRQ handler */
int __init ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev)
{
- struct ipu_platform_data *pdata = dev->dev.platform_data;
- unsigned int irq, irq_base, i;
+ unsigned int irq, i;
+ int irq_base = irq_alloc_descs(-1, 0, CONFIG_MX3_IPU_IRQS,
+ numa_node_id());
- irq_base = pdata->irq_base;
+ if (irq_base < 0)
+ return irq_base;
for (i = 0; i < IPU_IRQ_NR_BANKS; i++)
irq_bank[i].ipu = ipu;
@@ -387,15 +390,16 @@
irq_set_handler_data(ipu->irq_err, ipu);
irq_set_chained_handler(ipu->irq_err, ipu_irq_err);
+ ipu->irq_base = irq_base;
+
return 0;
}
void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev)
{
- struct ipu_platform_data *pdata = dev->dev.platform_data;
unsigned int irq, irq_base;
- irq_base = pdata->irq_base;
+ irq_base = ipu->irq_base;
irq_set_chained_handler(ipu->irq_fn, NULL);
irq_set_handler_data(ipu->irq_fn, NULL);
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index cbcc28e..e4feba6 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -392,6 +392,8 @@
struct pl330_reqcfg *cfg;
/* Pointer to first xfer in the request. */
struct pl330_xfer *x;
+ /* Hook to attach to DMAC's list of reqs with due callback */
+ struct list_head rqd;
};
/*
@@ -461,8 +463,6 @@
/* Number of bytes taken to setup MC for the req */
u32 mc_len;
struct pl330_req *r;
- /* Hook to attach to DMAC's list of reqs with due callback */
- struct list_head rqd;
};
/* ToBeDone for tasklet */
@@ -1683,7 +1683,7 @@
/* Returns 1 if state was updated, 0 otherwise */
static int pl330_update(const struct pl330_info *pi)
{
- struct _pl330_req *rqdone;
+ struct pl330_req *rqdone, *tmp;
struct pl330_dmac *pl330;
unsigned long flags;
void __iomem *regs;
@@ -1750,7 +1750,10 @@
if (active == -1) /* Aborted */
continue;
- rqdone = &thrd->req[active];
+ /* Detach the req */
+ rqdone = thrd->req[active].r;
+ thrd->req[active].r = NULL;
+
mark_free(thrd, active);
/* Get going again ASAP */
@@ -1762,20 +1765,11 @@
}
/* Now that we are in no hurry, do the callbacks */
- while (!list_empty(&pl330->req_done)) {
- struct pl330_req *r;
-
- rqdone = container_of(pl330->req_done.next,
- struct _pl330_req, rqd);
-
- list_del_init(&rqdone->rqd);
-
- /* Detach the req */
- r = rqdone->r;
- rqdone->r = NULL;
+ list_for_each_entry_safe(rqdone, tmp, &pl330->req_done, rqd) {
+ list_del(&rqdone->rqd);
spin_unlock_irqrestore(&pl330->lock, flags);
- _callback(r, PL330_ERR_NONE);
+ _callback(rqdone, PL330_ERR_NONE);
spin_lock_irqsave(&pl330->lock, flags);
}
@@ -2321,7 +2315,7 @@
/* Pick up ripe tomatoes */
list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
if (desc->status == DONE) {
- if (pch->cyclic)
+ if (!pch->cyclic)
dma_cookie_complete(&desc->txd);
list_move_tail(&desc->node, &list);
}
@@ -2539,7 +2533,7 @@
}
/* Returns the number of descriptors added to the DMAC pool */
-int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
+static int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
{
struct dma_pl330_desc *desc;
unsigned long flags;
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 10f3750..de5ba86e 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -164,7 +164,7 @@
else
return (char *)ptr;
- r = size % align;
+ r = (unsigned long)p % align;
if (r == 0)
return (char *)ptr;
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index d27778f..a499c7e 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -1814,12 +1814,6 @@
if (mce->bank != 8)
return NOTIFY_DONE;
-#ifdef CONFIG_SMP
- /* Only handle if it is the right mc controller */
- if (mce->socketid != pvt->i7core_dev->socket)
- return NOTIFY_DONE;
-#endif
-
smp_rmb();
if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
smp_wmb();
@@ -2116,8 +2110,6 @@
if (pvt->enable_scrub)
disable_sdram_scrub_setting(mci);
- mce_unregister_decode_chain(&i7_mce_dec);
-
/* Disable EDAC polling */
i7core_pci_ctl_release(pvt);
@@ -2222,8 +2214,6 @@
/* DCLK for scrub rate setting */
pvt->dclk_freq = get_dclk_freq();
- mce_register_decode_chain(&i7_mce_dec);
-
return 0;
fail0:
@@ -2367,8 +2357,10 @@
pci_rc = pci_register_driver(&i7core_driver);
- if (pci_rc >= 0)
+ if (pci_rc >= 0) {
+ mce_register_decode_chain(&i7_mce_dec);
return 0;
+ }
i7core_printk(KERN_ERR, "Failed to register device with error %d.\n",
pci_rc);
@@ -2384,6 +2376,7 @@
{
debugf2("MC: " __FILE__ ": %s()\n", __func__);
pci_unregister_driver(&i7core_driver);
+ mce_unregister_decode_chain(&i7_mce_dec);
}
module_init(i7core_init);
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 4c40235..0e37462 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -980,7 +980,8 @@
layers[1].type = EDAC_MC_LAYER_CHANNEL;
layers[1].size = 1;
layers[1].is_virt_csrow = false;
- mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), sizeof(*pdata));
+ mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), layers,
+ sizeof(*pdata));
if (!mci) {
devres_release_group(&op->dev, mpc85xx_mc_err_probe);
return -ENOMEM;
diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index 4adaf4b..36ad17e 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -555,7 +555,7 @@
pvt->is_close_pg = false;
}
- pci_read_config_dword(pvt->pci_ta, RANK_CFG_A, ®);
+ pci_read_config_dword(pvt->pci_ddrio, RANK_CFG_A, ®);
if (IS_RDIMM_ENABLED(reg)) {
/* FIXME: Can also be LRDIMM */
debugf0("Memory is registered\n");
@@ -1604,8 +1604,6 @@
debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
__func__, mci, &sbridge_dev->pdev[0]->dev);
- mce_unregister_decode_chain(&sbridge_mce_dec);
-
/* Remove MC sysfs nodes */
edac_mc_del_mc(mci->dev);
@@ -1682,7 +1680,6 @@
goto fail0;
}
- mce_register_decode_chain(&sbridge_mce_dec);
return 0;
fail0:
@@ -1811,8 +1808,10 @@
pci_rc = pci_register_driver(&sbridge_driver);
- if (pci_rc >= 0)
+ if (pci_rc >= 0) {
+ mce_register_decode_chain(&sbridge_mce_dec);
return 0;
+ }
sbridge_printk(KERN_ERR, "Failed to register device with error %d.\n",
pci_rc);
@@ -1828,6 +1827,7 @@
{
debugf2("MC: " __FILE__ ": %s()\n", __func__);
pci_unregister_driver(&sbridge_driver);
+ mce_unregister_decode_chain(&sbridge_mce_dec);
}
module_init(sbridge_init);
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index 23416e4..a4ed30b 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -116,8 +116,8 @@
[5] = "Charge-downstream",
[6] = "MHL",
[7] = "Dock-desk",
- [7] = "Dock-card",
- [8] = "JIG",
+ [8] = "Dock-card",
+ [9] = "JIG",
NULL,
};
@@ -514,6 +514,7 @@
extcon_dev_unregister(info->edev);
+ kfree(info->edev);
kfree(info);
return 0;
diff --git a/drivers/extcon/extcon_class.c b/drivers/extcon/extcon_class.c
index f598a70..159aeb0 100644
--- a/drivers/extcon/extcon_class.c
+++ b/drivers/extcon/extcon_class.c
@@ -762,7 +762,7 @@
#if defined(CONFIG_ANDROID)
if (switch_class)
ret = class_compat_create_link(switch_class, edev->dev,
- dev);
+ NULL);
#endif /* CONFIG_ANDROID */
spin_lock_init(&edev->lock);
diff --git a/drivers/extcon/extcon_gpio.c b/drivers/extcon/extcon_gpio.c
index fe7a07b..8a0dcc1 100644
--- a/drivers/extcon/extcon_gpio.c
+++ b/drivers/extcon/extcon_gpio.c
@@ -125,6 +125,7 @@
if (ret < 0)
goto err_request_irq;
+ platform_set_drvdata(pdev, extcon_data);
/* Perform initial detection */
gpio_extcon_work(&extcon_data->work.work);
@@ -146,6 +147,7 @@
struct gpio_extcon_data *extcon_data = platform_get_drvdata(pdev);
cancel_delayed_work_sync(&extcon_data->work);
+ free_irq(extcon_data->irq, extcon_data);
gpio_free(extcon_data->gpio);
extcon_dev_unregister(&extcon_data->edev);
devm_kfree(&pdev->dev, extcon_data);
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index c4067d0..542f0c0 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -136,7 +136,7 @@
config GPIO_MSM_V1
tristate "Qualcomm MSM GPIO v1"
- depends on GPIOLIB && ARCH_MSM
+ depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
help
Say yes here to support the GPIO interface on ARM v6 based
Qualcomm MSM chips. Most of the pins on the MSM can be
diff --git a/drivers/gpio/devres.c b/drivers/gpio/devres.c
index 9e9947c..1077754 100644
--- a/drivers/gpio/devres.c
+++ b/drivers/gpio/devres.c
@@ -98,6 +98,7 @@
return 0;
}
+EXPORT_SYMBOL(devm_gpio_request_one);
/**
* devm_gpio_free - free an interrupt
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index c337143..04691d3 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -23,6 +23,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
@@ -33,8 +34,6 @@
#include <asm-generic/bug.h>
#include <asm/mach/irq.h>
-#define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START)
-
enum mxc_gpio_hwtype {
IMX1_GPIO, /* runs on i.mx1 */
IMX21_GPIO, /* runs on i.mx21 and i.mx27 */
@@ -61,7 +60,7 @@
void __iomem *base;
int irq;
int irq_high;
- int virtual_irq_start;
+ struct irq_domain *domain;
struct bgpio_chip bgc;
u32 both_edges;
};
@@ -144,14 +143,15 @@
static int gpio_set_irq_type(struct irq_data *d, u32 type)
{
- u32 gpio = irq_to_gpio(d->irq);
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct mxc_gpio_port *port = gc->private;
u32 bit, val;
+ u32 gpio_idx = d->hwirq;
+ u32 gpio = port->bgc.gc.base + gpio_idx;
int edge;
void __iomem *reg = port->base;
- port->both_edges &= ~(1 << (gpio & 31));
+ port->both_edges &= ~(1 << gpio_idx);
switch (type) {
case IRQ_TYPE_EDGE_RISING:
edge = GPIO_INT_RISE_EDGE;
@@ -168,7 +168,7 @@
edge = GPIO_INT_HIGH_LEV;
pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
}
- port->both_edges |= 1 << (gpio & 31);
+ port->both_edges |= 1 << gpio_idx;
break;
case IRQ_TYPE_LEVEL_LOW:
edge = GPIO_INT_LOW_LEV;
@@ -180,11 +180,11 @@
return -EINVAL;
}
- reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
- bit = gpio & 0xf;
+ reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* ICR1 or ICR2 */
+ bit = gpio_idx & 0xf;
val = readl(reg) & ~(0x3 << (bit << 1));
writel(val | (edge << (bit << 1)), reg);
- writel(1 << (gpio & 0x1f), port->base + GPIO_ISR);
+ writel(1 << gpio_idx, port->base + GPIO_ISR);
return 0;
}
@@ -217,15 +217,13 @@
/* handle 32 interrupts in one status register */
static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
{
- u32 gpio_irq_no_base = port->virtual_irq_start;
-
while (irq_stat != 0) {
int irqoffset = fls(irq_stat) - 1;
if (port->both_edges & (1 << irqoffset))
mxc_flip_edge(port, irqoffset);
- generic_handle_irq(gpio_irq_no_base + irqoffset);
+ generic_handle_irq(irq_find_mapping(port->domain, irqoffset));
irq_stat &= ~(1 << irqoffset);
}
@@ -276,10 +274,9 @@
*/
static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
{
- u32 gpio = irq_to_gpio(d->irq);
- u32 gpio_idx = gpio & 0x1F;
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct mxc_gpio_port *port = gc->private;
+ u32 gpio_idx = d->hwirq;
if (enable) {
if (port->irq_high && (gpio_idx >= 16))
@@ -296,12 +293,12 @@
return 0;
}
-static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port)
+static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
- gc = irq_alloc_generic_chip("gpio-mxc", 1, port->virtual_irq_start,
+ gc = irq_alloc_generic_chip("gpio-mxc", 1, irq_base,
port->base, handle_level_irq);
gc->private = port;
@@ -352,7 +349,7 @@
struct mxc_gpio_port *port =
container_of(bgc, struct mxc_gpio_port, bgc);
- return port->virtual_irq_start + offset;
+ return irq_find_mapping(port->domain, offset);
}
static int __devinit mxc_gpio_probe(struct platform_device *pdev)
@@ -360,6 +357,7 @@
struct device_node *np = pdev->dev.of_node;
struct mxc_gpio_port *port;
struct resource *iores;
+ int irq_base;
int err;
mxc_gpio_get_hw(pdev);
@@ -398,10 +396,12 @@
writel(~0, port->base + GPIO_ISR);
if (mxc_gpio_hwtype == IMX21_GPIO) {
- /* setup one handler for all GPIO interrupts */
- if (pdev->id == 0)
- irq_set_chained_handler(port->irq,
- mx2_gpio_irq_handler);
+ /*
+ * Setup one handler for all GPIO interrupts. Actually setting
+ * the handler is needed only once, but doing it for every port
+ * is more robust and easier.
+ */
+ irq_set_chained_handler(port->irq, mx2_gpio_irq_handler);
} else {
/* setup one handler for each entry */
irq_set_chained_handler(port->irq, mx3_gpio_irq_handler);
@@ -430,20 +430,30 @@
if (err)
goto out_bgpio_remove;
- /*
- * In dt case, we use gpio number range dynamically
- * allocated by gpio core.
- */
- port->virtual_irq_start = MXC_GPIO_IRQ_START + (np ? port->bgc.gc.base :
- pdev->id * 32);
+ irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
+ if (irq_base < 0) {
+ err = irq_base;
+ goto out_gpiochip_remove;
+ }
+
+ port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+ if (!port->domain) {
+ err = -ENODEV;
+ goto out_irqdesc_free;
+ }
/* gpio-mxc can be a generic irq chip */
- mxc_gpio_init_gc(port);
+ mxc_gpio_init_gc(port, irq_base);
list_add_tail(&port->node, &mxc_gpio_ports);
return 0;
+out_irqdesc_free:
+ irq_free_descs(irq_base, 32);
+out_gpiochip_remove:
+ WARN_ON(gpiochip_remove(&port->bgc.gc) < 0);
out_bgpio_remove:
bgpio_remove(&port->bgc);
out_iounmap:
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index c4ed172..4fbc208 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -174,12 +174,22 @@
if (bank->dbck_enable_mask && !bank->dbck_enabled) {
clk_enable(bank->dbck);
bank->dbck_enabled = true;
+
+ __raw_writel(bank->dbck_enable_mask,
+ bank->base + bank->regs->debounce_en);
}
}
static inline void _gpio_dbck_disable(struct gpio_bank *bank)
{
if (bank->dbck_enable_mask && bank->dbck_enabled) {
+ /*
+ * Disable debounce before cutting it's clock. If debounce is
+ * enabled but the clock is not, GPIO module seems to be unable
+ * to detect events and generate interrupts at least on OMAP3.
+ */
+ __raw_writel(0, bank->base + bank->regs->debounce_en);
+
clk_disable(bank->dbck);
bank->dbck_enabled = false;
}
@@ -1081,7 +1091,6 @@
bank->is_mpuio = pdata->is_mpuio;
bank->non_wakeup_gpios = pdata->non_wakeup_gpios;
bank->loses_context = pdata->loses_context;
- bank->get_context_loss_count = pdata->get_context_loss_count;
bank->regs = pdata->regs;
#ifdef CONFIG_OF_GPIO
bank->chip.of_node = of_node_get(node);
@@ -1135,6 +1144,9 @@
omap_gpio_chip_init(bank);
omap_gpio_show_rev(bank);
+ if (bank->loses_context)
+ bank->get_context_loss_count = pdata->get_context_loss_count;
+
pm_runtime_put(bank->dev);
list_add_tail(&bank->node, &omap_gpio_list);
diff --git a/drivers/gpio/gpio-sta2x11.c b/drivers/gpio/gpio-sta2x11.c
index 38416be..6064fb3 100644
--- a/drivers/gpio/gpio-sta2x11.c
+++ b/drivers/gpio/gpio-sta2x11.c
@@ -383,8 +383,9 @@
}
spin_lock_init(&chip->lock);
gsta_gpio_setup(chip);
- for (i = 0; i < GSTA_NR_GPIO; i++)
- gsta_set_config(chip, i, gpio_pdata->pinconfig[i]);
+ if (gpio_pdata)
+ for (i = 0; i < GSTA_NR_GPIO; i++)
+ gsta_set_config(chip, i, gpio_pdata->pinconfig[i]);
/* 384 was used in previous code: be compatible for other drivers */
err = irq_alloc_descs(-1, 384, GSTA_NR_GPIO, NUMA_NO_NODE);
diff --git a/drivers/gpio/gpio-tps65910.c b/drivers/gpio/gpio-tps65910.c
index c1ad288..11f29c8 100644
--- a/drivers/gpio/gpio-tps65910.c
+++ b/drivers/gpio/gpio-tps65910.c
@@ -149,6 +149,9 @@
tps65910_gpio->gpio_chip.set = tps65910_gpio_set;
tps65910_gpio->gpio_chip.get = tps65910_gpio_get;
tps65910_gpio->gpio_chip.dev = &pdev->dev;
+#ifdef CONFIG_OF_GPIO
+ tps65910_gpio->gpio_chip.of_node = tps65910->dev->of_node;
+#endif
if (pdata && pdata->gpio_base)
tps65910_gpio->gpio_chip.base = pdata->gpio_base;
else
diff --git a/drivers/gpio/gpio-wm8994.c b/drivers/gpio/gpio-wm8994.c
index 92ea535..aa61ad2 100644
--- a/drivers/gpio/gpio-wm8994.c
+++ b/drivers/gpio/gpio-wm8994.c
@@ -89,8 +89,11 @@
struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip);
struct wm8994 *wm8994 = wm8994_gpio->wm8994;
+ if (value)
+ value = WM8994_GPN_LVL;
+
return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset,
- WM8994_GPN_DIR, 0);
+ WM8994_GPN_DIR | WM8994_GPN_LVL, value);
}
static void wm8994_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index eb92fe2..a8743c3 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -610,7 +610,7 @@
drm_monitor_supports_rb(struct edid *edid)
{
if (edid->revision >= 4) {
- bool ret;
+ bool ret = false;
drm_for_each_detailed_block((u8 *)edid, is_rb, &ret);
return ret;
}
@@ -1039,6 +1039,24 @@
return true;
}
+static bool valid_inferred_mode(const struct drm_connector *connector,
+ const struct drm_display_mode *mode)
+{
+ struct drm_display_mode *m;
+ bool ok = false;
+
+ list_for_each_entry(m, &connector->probed_modes, head) {
+ if (mode->hdisplay == m->hdisplay &&
+ mode->vdisplay == m->vdisplay &&
+ drm_mode_vrefresh(mode) == drm_mode_vrefresh(m))
+ return false; /* duplicated */
+ if (mode->hdisplay <= m->hdisplay &&
+ mode->vdisplay <= m->vdisplay)
+ ok = true;
+ }
+ return ok;
+}
+
static int
drm_dmt_modes_for_range(struct drm_connector *connector, struct edid *edid,
struct detailed_timing *timing)
@@ -1048,7 +1066,8 @@
struct drm_device *dev = connector->dev;
for (i = 0; i < drm_num_dmt_modes; i++) {
- if (mode_in_range(drm_dmt_modes + i, edid, timing)) {
+ if (mode_in_range(drm_dmt_modes + i, edid, timing) &&
+ valid_inferred_mode(connector, drm_dmt_modes + i)) {
newmode = drm_mode_duplicate(dev, &drm_dmt_modes[i]);
if (newmode) {
drm_mode_probed_add(connector, newmode);
@@ -1088,7 +1107,8 @@
return modes;
fixup_mode_1366x768(newmode);
- if (!mode_in_range(newmode, edid, timing)) {
+ if (!mode_in_range(newmode, edid, timing) ||
+ !valid_inferred_mode(connector, newmode)) {
drm_mode_destroy(dev, newmode);
continue;
}
@@ -1116,7 +1136,8 @@
return modes;
fixup_mode_1366x768(newmode);
- if (!mode_in_range(newmode, edid, timing)) {
+ if (!mode_in_range(newmode, edid, timing) ||
+ !valid_inferred_mode(connector, newmode)) {
drm_mode_destroy(dev, newmode);
continue;
}
diff --git a/drivers/gpu/drm/gma500/cdv_device.c b/drivers/gpu/drm/gma500/cdv_device.c
index 9764045..b7e7b49 100644
--- a/drivers/gpu/drm/gma500/cdv_device.c
+++ b/drivers/gpu/drm/gma500/cdv_device.c
@@ -78,21 +78,6 @@
return REG_READ(BLC_PWM_CTL2) & PWM_LEGACY_MODE;
}
-static int cdv_get_brightness(struct backlight_device *bd)
-{
- struct drm_device *dev = bl_get_data(bd);
- u32 val = REG_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
-
- if (cdv_backlight_combination_mode(dev)) {
- u8 lbpc;
-
- val &= ~1;
- pci_read_config_byte(dev->pdev, 0xF4, &lbpc);
- val *= lbpc;
- }
- return val;
-}
-
static u32 cdv_get_max_backlight(struct drm_device *dev)
{
u32 max = REG_READ(BLC_PWM_CTL);
@@ -110,6 +95,22 @@
return max;
}
+static int cdv_get_brightness(struct backlight_device *bd)
+{
+ struct drm_device *dev = bl_get_data(bd);
+ u32 val = REG_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
+
+ if (cdv_backlight_combination_mode(dev)) {
+ u8 lbpc;
+
+ val &= ~1;
+ pci_read_config_byte(dev->pdev, 0xF4, &lbpc);
+ val *= lbpc;
+ }
+ return (val * 100)/cdv_get_max_backlight(dev);
+
+}
+
static int cdv_set_brightness(struct backlight_device *bd)
{
struct drm_device *dev = bl_get_data(bd);
@@ -120,6 +121,9 @@
if (level < 1)
level = 1;
+ level *= cdv_get_max_backlight(dev);
+ level /= 100;
+
if (cdv_backlight_combination_mode(dev)) {
u32 max = cdv_get_max_backlight(dev);
u8 lbpc;
@@ -157,7 +161,6 @@
cdv_backlight_device->props.brightness =
cdv_get_brightness(cdv_backlight_device);
- cdv_backlight_device->props.max_brightness = cdv_get_max_backlight(dev);
backlight_update_status(cdv_backlight_device);
dev_priv->backlight_device = cdv_backlight_device;
return 0;
diff --git a/drivers/gpu/drm/gma500/opregion.c b/drivers/gpu/drm/gma500/opregion.c
index 4f186ec..c430bd4 100644
--- a/drivers/gpu/drm/gma500/opregion.c
+++ b/drivers/gpu/drm/gma500/opregion.c
@@ -144,6 +144,8 @@
#define ASLE_CBLV_VALID (1<<31)
+static struct psb_intel_opregion *system_opregion;
+
static u32 asle_set_backlight(struct drm_device *dev, u32 bclp)
{
struct drm_psb_private *dev_priv = dev->dev_private;
@@ -205,7 +207,7 @@
struct drm_psb_private *dev_priv = dev->dev_private;
struct opregion_asle *asle = dev_priv->opregion.asle;
- if (asle) {
+ if (asle && system_opregion ) {
/* Don't do this on Medfield or other non PC like devices, they
use the bit for something different altogether */
psb_enable_pipestat(dev_priv, 0, PIPE_LEGACY_BLC_EVENT_ENABLE);
@@ -221,7 +223,6 @@
#define ACPI_EV_LID (1<<1)
#define ACPI_EV_DOCK (1<<2)
-static struct psb_intel_opregion *system_opregion;
static int psb_intel_opregion_video_event(struct notifier_block *nb,
unsigned long val, void *data)
@@ -266,9 +267,6 @@
system_opregion = opregion;
register_acpi_notifier(&psb_intel_opregion_notifier);
}
-
- if (opregion->asle)
- psb_intel_opregion_enable_asle(dev);
}
void psb_intel_opregion_fini(struct drm_device *dev)
diff --git a/drivers/gpu/drm/gma500/opregion.h b/drivers/gpu/drm/gma500/opregion.h
index 72dc6b9..4a90f8b 100644
--- a/drivers/gpu/drm/gma500/opregion.h
+++ b/drivers/gpu/drm/gma500/opregion.h
@@ -27,6 +27,7 @@
extern void psb_intel_opregion_init(struct drm_device *dev);
extern void psb_intel_opregion_fini(struct drm_device *dev);
extern int psb_intel_opregion_setup(struct drm_device *dev);
+extern void psb_intel_opregion_enable_asle(struct drm_device *dev);
#else
@@ -46,4 +47,8 @@
{
return 0;
}
+
+extern inline void psb_intel_opregion_enable_asle(struct drm_device *dev)
+{
+}
#endif
diff --git a/drivers/gpu/drm/gma500/psb_device.c b/drivers/gpu/drm/gma500/psb_device.c
index eff039b..5971bc8 100644
--- a/drivers/gpu/drm/gma500/psb_device.c
+++ b/drivers/gpu/drm/gma500/psb_device.c
@@ -144,6 +144,10 @@
psb_backlight_device->props.max_brightness = 100;
backlight_update_status(psb_backlight_device);
dev_priv->backlight_device = psb_backlight_device;
+
+ /* This must occur after the backlight is properly initialised */
+ psb_lid_timer_init(dev_priv);
+
return 0;
}
@@ -354,13 +358,6 @@
return 0;
}
-/* Not exactly an erratum more an irritation */
-static void psb_chip_errata(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- psb_lid_timer_init(dev_priv);
-}
-
static void psb_chip_teardown(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
@@ -379,7 +376,6 @@
.sgx_offset = PSB_SGX_OFFSET,
.chip_setup = psb_chip_setup,
.chip_teardown = psb_chip_teardown,
- .errata = psb_chip_errata,
.crtc_helper = &psb_intel_helper_funcs,
.crtc_funcs = &psb_intel_crtc_funcs,
diff --git a/drivers/gpu/drm/gma500/psb_drv.c b/drivers/gpu/drm/gma500/psb_drv.c
index caba6e0..a8858a9 100644
--- a/drivers/gpu/drm/gma500/psb_drv.c
+++ b/drivers/gpu/drm/gma500/psb_drv.c
@@ -374,6 +374,7 @@
if (ret)
return ret;
+ psb_intel_opregion_enable_asle(dev);
#if 0
/*enable runtime pm at last*/
pm_runtime_enable(&dev->pdev->dev);
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index f947926..36822b9 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1401,6 +1401,27 @@
}
}
+static void i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
+{
+ struct apertures_struct *ap;
+ struct pci_dev *pdev = dev_priv->dev->pdev;
+ bool primary;
+
+ ap = alloc_apertures(1);
+ if (!ap)
+ return;
+
+ ap->ranges[0].base = dev_priv->dev->agp->base;
+ ap->ranges[0].size =
+ dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
+ primary =
+ pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
+
+ remove_conflicting_framebuffers(ap, "inteldrmfb", primary);
+
+ kfree(ap);
+}
+
/**
* i915_driver_load - setup chip and create an initial config
* @dev: DRM device
@@ -1446,6 +1467,15 @@
goto free_priv;
}
+ dev_priv->mm.gtt = intel_gtt_get();
+ if (!dev_priv->mm.gtt) {
+ DRM_ERROR("Failed to initialize GTT\n");
+ ret = -ENODEV;
+ goto put_bridge;
+ }
+
+ i915_kick_out_firmware_fb(dev_priv);
+
pci_set_master(dev->pdev);
/* overlay on gen2 is broken and can't address above 1G */
@@ -1471,13 +1501,6 @@
goto put_bridge;
}
- dev_priv->mm.gtt = intel_gtt_get();
- if (!dev_priv->mm.gtt) {
- DRM_ERROR("Failed to initialize GTT\n");
- ret = -ENODEV;
- goto out_rmmap;
- }
-
aperture_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
dev_priv->mm.gtt_mapping =
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index b1fe0ed..ed3224c 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -412,7 +412,6 @@
*/
spin_lock_irqsave(&dev_priv->rps_lock, flags);
- WARN(dev_priv->pm_iir & pm_iir, "Missed a PM interrupt\n");
dev_priv->pm_iir |= pm_iir;
I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir);
POSTING_READ(GEN6_PMIMR);
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 0ede02a..a748e5c 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -740,8 +740,11 @@
if (HAS_PCH_SPLIT(dev)) {
I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->saveBLC_PWM_CTL);
I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->saveBLC_PWM_CTL2);
- I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL);
+ /* NOTE: BLC_PWM_CPU_CTL must be written after BLC_PWM_CPU_CTL2;
+ * otherwise we get blank eDP screen after S3 on some machines
+ */
I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->saveBLC_CPU_PWM_CTL2);
+ I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL);
I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e0aa064..a8538ac 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6558,7 +6558,7 @@
if (I915_READ(HDMIC) & PORT_DETECTED)
intel_hdmi_init(dev, HDMIC);
- if (I915_READ(HDMID) & PORT_DETECTED)
+ if (!dpd_is_edp && I915_READ(HDMID) & PORT_DETECTED)
intel_hdmi_init(dev, HDMID);
if (I915_READ(PCH_DP_C) & DP_DETECTED)
@@ -6921,19 +6921,6 @@
POSTING_READ(vga_reg);
}
-static void ivb_pch_pwm_override(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- /*
- * IVB has CPU eDP backlight regs too, set things up to let the
- * PCH regs control the backlight
- */
- I915_WRITE(BLC_PWM_CPU_CTL2, PWM_ENABLE);
- I915_WRITE(BLC_PWM_CPU_CTL, 0);
- I915_WRITE(BLC_PWM_PCH_CTL1, PWM_ENABLE | (1<<30));
-}
-
void intel_modeset_init_hw(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -6950,9 +6937,6 @@
gen6_enable_rps(dev_priv);
gen6_update_ring_freq(dev_priv);
}
-
- if (IS_IVYBRIDGE(dev))
- ivb_pch_pwm_override(dev);
}
void intel_modeset_init(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 296cfc2..c044932 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -32,6 +32,7 @@
#include "drm.h"
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
+#include "drm_edid.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
@@ -67,6 +68,8 @@
struct drm_display_mode *panel_fixed_mode; /* for eDP */
struct delayed_work panel_vdd_work;
bool want_panel_vdd;
+ struct edid *edid; /* cached EDID for eDP */
+ int edid_mode_count;
};
/**
@@ -371,7 +374,7 @@
int recv_bytes;
uint32_t status;
uint32_t aux_clock_divider;
- int try, precharge = 5;
+ int try, precharge;
intel_dp_check_edp(intel_dp);
/* The clock divider is based off the hrawclk,
@@ -391,6 +394,11 @@
else
aux_clock_divider = intel_hrawclk(dev) / 2;
+ if (IS_GEN6(dev))
+ precharge = 3;
+ else
+ precharge = 5;
+
/* Try to wait for any previous AUX channel activity */
for (try = 0; try < 3; try++) {
status = I915_READ(ch_ctl);
@@ -1973,6 +1981,8 @@
if (!(intel_dp->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT))
return;
+ ironlake_edp_panel_vdd_on(intel_dp);
+
if (intel_dp_aux_native_read_retry(intel_dp, DP_SINK_OUI, buf, 3))
DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n",
buf[0], buf[1], buf[2]);
@@ -1980,6 +1990,8 @@
if (intel_dp_aux_native_read_retry(intel_dp, DP_BRANCH_OUI, buf, 3))
DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n",
buf[0], buf[1], buf[2]);
+
+ ironlake_edp_panel_vdd_off(intel_dp, false);
}
static bool
@@ -2116,10 +2128,22 @@
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
struct edid *edid;
+ int size;
- ironlake_edp_panel_vdd_on(intel_dp);
+ if (is_edp(intel_dp)) {
+ if (!intel_dp->edid)
+ return NULL;
+
+ size = (intel_dp->edid->extensions + 1) * EDID_LENGTH;
+ edid = kmalloc(size, GFP_KERNEL);
+ if (!edid)
+ return NULL;
+
+ memcpy(edid, intel_dp->edid, size);
+ return edid;
+ }
+
edid = drm_get_edid(connector, adapter);
- ironlake_edp_panel_vdd_off(intel_dp, false);
return edid;
}
@@ -2129,9 +2153,17 @@
struct intel_dp *intel_dp = intel_attached_dp(connector);
int ret;
- ironlake_edp_panel_vdd_on(intel_dp);
+ if (is_edp(intel_dp)) {
+ drm_mode_connector_update_edid_property(connector,
+ intel_dp->edid);
+ ret = drm_add_edid_modes(connector, intel_dp->edid);
+ drm_edid_to_eld(connector,
+ intel_dp->edid);
+ connector->display_info.raw_edid = NULL;
+ return intel_dp->edid_mode_count;
+ }
+
ret = intel_ddc_get_modes(connector, adapter);
- ironlake_edp_panel_vdd_off(intel_dp, false);
return ret;
}
@@ -2321,6 +2353,7 @@
i2c_del_adapter(&intel_dp->adapter);
drm_encoder_cleanup(encoder);
if (is_edp(intel_dp)) {
+ kfree(intel_dp->edid);
cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
ironlake_panel_vdd_off_sync(intel_dp);
}
@@ -2504,11 +2537,14 @@
break;
}
+ intel_dp_i2c_init(intel_dp, intel_connector, name);
+
/* Cache some DPCD data in the eDP case */
if (is_edp(intel_dp)) {
bool ret;
struct edp_power_seq cur, vbt;
u32 pp_on, pp_off, pp_div;
+ struct edid *edid;
pp_on = I915_READ(PCH_PP_ON_DELAYS);
pp_off = I915_READ(PCH_PP_OFF_DELAYS);
@@ -2576,9 +2612,19 @@
intel_dp_destroy(&intel_connector->base);
return;
}
- }
- intel_dp_i2c_init(intel_dp, intel_connector, name);
+ ironlake_edp_panel_vdd_on(intel_dp);
+ edid = drm_get_edid(connector, &intel_dp->adapter);
+ if (edid) {
+ drm_mode_connector_update_edid_property(connector,
+ edid);
+ intel_dp->edid_mode_count =
+ drm_add_edid_modes(connector, edid);
+ drm_edid_to_eld(connector, edid);
+ intel_dp->edid = edid;
+ }
+ ironlake_edp_panel_vdd_off(intel_dp, false);
+ }
intel_encoder->hot_plug = intel_dp_hot_plug;
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index 153b9a1..1074bc5 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -467,7 +467,7 @@
nfbdev->helper.funcs = &nouveau_fbcon_helper_funcs;
ret = drm_fb_helper_init(dev, &nfbdev->helper,
- nv_two_heads(dev) ? 2 : 1, 4);
+ dev->mode_config.num_crtc, 4);
if (ret) {
kfree(nfbdev);
return ret;
diff --git a/drivers/gpu/drm/nouveau/nouveau_prime.c b/drivers/gpu/drm/nouveau/nouveau_prime.c
index a89240e..a25cf2c 100644
--- a/drivers/gpu/drm/nouveau/nouveau_prime.c
+++ b/drivers/gpu/drm/nouveau/nouveau_prime.c
@@ -1,3 +1,26 @@
+/*
+ * Copyright 2011 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ */
#include "drmP.h"
#include "drm.h"
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 01d77d1..3904d79 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1149,7 +1149,9 @@
}
if (tiling_flags & RADEON_TILING_MACRO) {
- if (rdev->family >= CHIP_CAYMAN)
+ if (rdev->family >= CHIP_TAHITI)
+ tmp = rdev->config.si.tile_config;
+ else if (rdev->family >= CHIP_CAYMAN)
tmp = rdev->config.cayman.tile_config;
else
tmp = rdev->config.evergreen.tile_config;
@@ -1177,6 +1179,12 @@
} else if (tiling_flags & RADEON_TILING_MICRO)
fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_1D_TILED_THIN1);
+ if ((rdev->family == CHIP_TAHITI) ||
+ (rdev->family == CHIP_PITCAIRN))
+ fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P8_32x32_8x16);
+ else if (rdev->family == CHIP_VERDE)
+ fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P4_8x16);
+
switch (radeon_crtc->crtc_id) {
case 0:
WREG32(AVIVO_D1VGA_CONTROL, 0);
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
index e7b1ec5..486ccdf 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -1926,7 +1926,9 @@
if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) {
r600_hdmi_enable(encoder);
- if (ASIC_IS_DCE4(rdev))
+ if (ASIC_IS_DCE6(rdev))
+ ; /* TODO (use pointers instead of if-s?) */
+ else if (ASIC_IS_DCE4(rdev))
evergreen_hdmi_setmode(encoder, adjusted_mode);
else
r600_hdmi_setmode(encoder, adjusted_mode);
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 01550d0..7fb3d2e 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -1932,6 +1932,9 @@
smx_dc_ctl0 |= NUMBER_OF_SETS(rdev->config.evergreen.sx_num_of_sets);
WREG32(SMX_DC_CTL0, smx_dc_ctl0);
+ if (rdev->family <= CHIP_SUMO2)
+ WREG32(SMX_SAR_CTL0, 0x00010000);
+
WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_size / 4) - 1) |
POSITION_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_pos_size / 4) - 1) |
SMX_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_smx_size / 4) - 1)));
diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c
index 4e7dd2b..c1655412 100644
--- a/drivers/gpu/drm/radeon/evergreen_cs.c
+++ b/drivers/gpu/drm/radeon/evergreen_cs.c
@@ -52,6 +52,7 @@
u32 cb_color_view[12];
u32 cb_color_pitch[12];
u32 cb_color_slice[12];
+ u32 cb_color_slice_idx[12];
u32 cb_color_attrib[12];
u32 cb_color_cmask_slice[8];/* unused */
u32 cb_color_fmask_slice[8];/* unused */
@@ -127,12 +128,14 @@
track->cb_color_info[i] = 0;
track->cb_color_view[i] = 0xFFFFFFFF;
track->cb_color_pitch[i] = 0;
- track->cb_color_slice[i] = 0;
+ track->cb_color_slice[i] = 0xfffffff;
+ track->cb_color_slice_idx[i] = 0;
}
track->cb_target_mask = 0xFFFFFFFF;
track->cb_shader_mask = 0xFFFFFFFF;
track->cb_dirty = true;
+ track->db_depth_slice = 0xffffffff;
track->db_depth_view = 0xFFFFC000;
track->db_depth_size = 0xFFFFFFFF;
track->db_depth_control = 0xFFFFFFFF;
@@ -250,10 +253,9 @@
{
struct evergreen_cs_track *track = p->track;
unsigned palign, halign, tileb, slice_pt;
+ unsigned mtile_pr, mtile_ps, mtileb;
tileb = 64 * surf->bpe * surf->nsamples;
- palign = track->group_size / (8 * surf->bpe * surf->nsamples);
- palign = MAX(8, palign);
slice_pt = 1;
if (tileb > surf->tsplit) {
slice_pt = tileb / surf->tsplit;
@@ -262,7 +264,10 @@
/* macro tile width & height */
palign = (8 * surf->bankw * track->npipes) * surf->mtilea;
halign = (8 * surf->bankh * surf->nbanks) / surf->mtilea;
- surf->layer_size = surf->nbx * surf->nby * surf->bpe * slice_pt;
+ mtileb = (palign / 8) * (halign / 8) * tileb;;
+ mtile_pr = surf->nbx / palign;
+ mtile_ps = (mtile_pr * surf->nby) / halign;
+ surf->layer_size = mtile_ps * mtileb * slice_pt;
surf->base_align = (palign / 8) * (halign / 8) * tileb;
surf->palign = palign;
surf->halign = halign;
@@ -434,6 +439,39 @@
offset += surf.layer_size * mslice;
if (offset > radeon_bo_size(track->cb_color_bo[id])) {
+ /* old ddx are broken they allocate bo with w*h*bpp but
+ * program slice with ALIGN(h, 8), catch this and patch
+ * command stream.
+ */
+ if (!surf.mode) {
+ volatile u32 *ib = p->ib.ptr;
+ unsigned long tmp, nby, bsize, size, min = 0;
+
+ /* find the height the ddx wants */
+ if (surf.nby > 8) {
+ min = surf.nby - 8;
+ }
+ bsize = radeon_bo_size(track->cb_color_bo[id]);
+ tmp = track->cb_color_bo_offset[id] << 8;
+ for (nby = surf.nby; nby > min; nby--) {
+ size = nby * surf.nbx * surf.bpe * surf.nsamples;
+ if ((tmp + size * mslice) <= bsize) {
+ break;
+ }
+ }
+ if (nby > min) {
+ surf.nby = nby;
+ slice = ((nby * surf.nbx) / 64) - 1;
+ if (!evergreen_surface_check(p, &surf, "cb")) {
+ /* check if this one works */
+ tmp += surf.layer_size * mslice;
+ if (tmp <= bsize) {
+ ib[track->cb_color_slice_idx[id]] = slice;
+ goto old_ddx_ok;
+ }
+ }
+ }
+ }
dev_warn(p->dev, "%s:%d cb[%d] bo too small (layer size %d, "
"offset %d, max layer %d, bo size %ld, slice %d)\n",
__func__, __LINE__, id, surf.layer_size,
@@ -446,6 +484,7 @@
surf.tsplit, surf.mtilea);
return -EINVAL;
}
+old_ddx_ok:
return 0;
}
@@ -1532,6 +1571,7 @@
case CB_COLOR7_SLICE:
tmp = (reg - CB_COLOR0_SLICE) / 0x3c;
track->cb_color_slice[tmp] = radeon_get_ib_value(p, idx);
+ track->cb_color_slice_idx[tmp] = idx;
track->cb_dirty = true;
break;
case CB_COLOR8_SLICE:
@@ -1540,6 +1580,7 @@
case CB_COLOR11_SLICE:
tmp = ((reg - CB_COLOR8_SLICE) / 0x1c) + 8;
track->cb_color_slice[tmp] = radeon_get_ib_value(p, idx);
+ track->cb_color_slice_idx[tmp] = idx;
track->cb_dirty = true;
break;
case CB_COLOR0_ATTRIB:
diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c
index a51f880..65c5416 100644
--- a/drivers/gpu/drm/radeon/evergreen_hdmi.c
+++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c
@@ -156,9 +156,6 @@
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset;
- if (ASIC_IS_DCE5(rdev))
- return;
-
/* Silent, r600_hdmi_enable will raise WARN for us */
if (!dig->afmt->enabled)
return;
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index 2773039..b50b15c 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -503,6 +503,7 @@
#define SCRATCH_UMSK 0x8540
#define SCRATCH_ADDR 0x8544
+#define SMX_SAR_CTL0 0xA008
#define SMX_DC_CTL0 0xA020
#define USE_HASH_FUNCTION (1 << 0)
#define NUMBER_OF_SETS(x) ((x) << 1)
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 3186522..b7bf18e 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -1303,6 +1303,10 @@
if (r)
return r;
+ r = r600_audio_init(rdev);
+ if (r)
+ return r;
+
return 0;
}
@@ -1329,6 +1333,7 @@
int cayman_suspend(struct radeon_device *rdev)
{
+ r600_audio_fini(rdev);
/* FIXME: we should wait for ring to be empty */
radeon_ib_pool_suspend(rdev);
radeon_vm_manager_suspend(rdev);
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index f30dc95..bff6272 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -1839,6 +1839,7 @@
WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA |
NUM_CLIP_SEQ(3)));
WREG32(PA_SC_ENHANCE, FORCE_EOV_MAX_CLK_CNT(4095));
+ WREG32(VC_ENHANCE, 0);
}
diff --git a/drivers/gpu/drm/radeon/r600_audio.c b/drivers/gpu/drm/radeon/r600_audio.c
index 7479a5c..79b5591 100644
--- a/drivers/gpu/drm/radeon/r600_audio.c
+++ b/drivers/gpu/drm/radeon/r600_audio.c
@@ -57,7 +57,7 @@
*/
static int r600_audio_chipset_supported(struct radeon_device *rdev)
{
- return (rdev->family >= CHIP_R600 && !ASIC_IS_DCE5(rdev))
+ return (rdev->family >= CHIP_R600 && !ASIC_IS_DCE6(rdev))
|| rdev->family == CHIP_RS600
|| rdev->family == CHIP_RS690
|| rdev->family == CHIP_RS740;
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 0133f5f..ca87f7a 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -2079,6 +2079,48 @@
return -EINVAL;
}
break;
+ case PACKET3_STRMOUT_BASE_UPDATE:
+ if (p->family < CHIP_RV770) {
+ DRM_ERROR("STRMOUT_BASE_UPDATE only supported on 7xx\n");
+ return -EINVAL;
+ }
+ if (pkt->count != 1) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE packet count\n");
+ return -EINVAL;
+ }
+ if (idx_value > 3) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE index\n");
+ return -EINVAL;
+ }
+ {
+ u64 offset;
+
+ r = r600_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE reloc\n");
+ return -EINVAL;
+ }
+
+ if (reloc->robj != track->vgt_strmout_bo[idx_value]) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE, bo does not match\n");
+ return -EINVAL;
+ }
+
+ offset = radeon_get_ib_value(p, idx+1) << 8;
+ if (offset != track->vgt_strmout_bo_offset[idx_value]) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE, bo offset does not match: 0x%llx, 0x%x\n",
+ offset, track->vgt_strmout_bo_offset[idx_value]);
+ return -EINVAL;
+ }
+
+ if ((offset + 4) > radeon_bo_size(reloc->robj)) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE bo too small: 0x%llx, 0x%lx\n",
+ offset + 4, radeon_bo_size(reloc->robj));
+ return -EINVAL;
+ }
+ ib[idx+1] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ }
+ break;
case PACKET3_SURFACE_BASE_UPDATE:
if (p->family >= CHIP_RV770 || p->family == CHIP_R600) {
DRM_ERROR("bad SURFACE_BASE_UPDATE\n");
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index 969c275..82a0a4c 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -322,9 +322,6 @@
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset;
- if (ASIC_IS_DCE5(rdev))
- return;
-
/* Silent, r600_hdmi_enable will raise WARN for us */
if (!dig->afmt->enabled)
return;
@@ -483,7 +480,7 @@
uint32_t offset;
u32 hdmi;
- if (ASIC_IS_DCE5(rdev))
+ if (ASIC_IS_DCE6(rdev))
return;
/* Silent, r600_hdmi_enable will raise WARN for us */
@@ -543,7 +540,7 @@
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset;
- if (ASIC_IS_DCE5(rdev))
+ if (ASIC_IS_DCE6(rdev))
return;
/* Called for ATOM_ENCODER_MODE_HDMI only */
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index a0dbf1f..025fd5b 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -485,6 +485,7 @@
#define TC_L2_SIZE(x) ((x)<<5)
#define L2_DISABLE_LATE_HIT (1<<9)
+#define VC_ENHANCE 0x9714
#define VGT_CACHE_INVALIDATION 0x88C4
#define CACHE_INVALIDATION(x) ((x)<<0)
@@ -1163,6 +1164,7 @@
#define PACKET3_SET_CTL_CONST 0x6F
#define PACKET3_SET_CTL_CONST_OFFSET 0x0003cff0
#define PACKET3_SET_CTL_CONST_END 0x0003e200
+#define PACKET3_STRMOUT_BASE_UPDATE 0x72 /* r7xx */
#define PACKET3_SURFACE_BASE_UPDATE 0x73
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index f0bb2b5..2c4d53f 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -57,9 +57,11 @@
* 2.13.0 - virtual memory support, streamout
* 2.14.0 - add evergreen tiling informations
* 2.15.0 - add max_pipes query
+ * 2.16.0 - fix evergreen 2D tiled surface calculation
+ * 2.17.0 - add STRMOUT_BASE_UPDATE for r7xx
*/
#define KMS_DRIVER_MAJOR 2
-#define KMS_DRIVER_MINOR 15
+#define KMS_DRIVER_MINOR 17
#define KMS_DRIVER_PATCHLEVEL 0
int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
int radeon_driver_unload_kms(struct drm_device *dev);
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index 59d4493..84b648a 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -289,8 +289,9 @@
rdev->vm_manager.enabled = false;
/* mark first vm as always in use, it's the system one */
+ /* allocate enough for 2 full VM pts */
r = radeon_sa_bo_manager_init(rdev, &rdev->vm_manager.sa_manager,
- rdev->vm_manager.max_pfn * 8,
+ rdev->vm_manager.max_pfn * 8 * 2,
RADEON_GEM_DOMAIN_VRAM);
if (r) {
dev_err(rdev->dev, "failed to allocate vm bo (%dKB)\n",
@@ -633,7 +634,15 @@
mutex_init(&vm->mutex);
INIT_LIST_HEAD(&vm->list);
INIT_LIST_HEAD(&vm->va);
- vm->last_pfn = 0;
+ /* SI requires equal sized PTs for all VMs, so always set
+ * last_pfn to max_pfn. cayman allows variable sized
+ * pts so we can grow then as needed. Once we switch
+ * to two level pts we can unify this again.
+ */
+ if (rdev->family >= CHIP_TAHITI)
+ vm->last_pfn = rdev->vm_manager.max_pfn;
+ else
+ vm->last_pfn = 0;
/* map the ib pool buffer at 0 in virtual address space, set
* read only
*/
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index f28bd4b..21ec9f5 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -292,6 +292,7 @@
int radeon_gem_busy_ioctl(struct drm_device *dev, void *data,
struct drm_file *filp)
{
+ struct radeon_device *rdev = dev->dev_private;
struct drm_radeon_gem_busy *args = data;
struct drm_gem_object *gobj;
struct radeon_bo *robj;
@@ -317,13 +318,14 @@
break;
}
drm_gem_object_unreference_unlocked(gobj);
- r = radeon_gem_handle_lockup(robj->rdev, r);
+ r = radeon_gem_handle_lockup(rdev, r);
return r;
}
int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
struct drm_file *filp)
{
+ struct radeon_device *rdev = dev->dev_private;
struct drm_radeon_gem_wait_idle *args = data;
struct drm_gem_object *gobj;
struct radeon_bo *robj;
@@ -336,10 +338,10 @@
robj = gem_to_radeon_bo(gobj);
r = radeon_bo_wait(robj, NULL, false);
/* callback hw specific functions if any */
- if (robj->rdev->asic->ioctl_wait_idle)
- robj->rdev->asic->ioctl_wait_idle(robj->rdev, robj);
+ if (rdev->asic->ioctl_wait_idle)
+ robj->rdev->asic->ioctl_wait_idle(rdev, robj);
drm_gem_object_unreference_unlocked(gobj);
- r = radeon_gem_handle_lockup(robj->rdev, r);
+ r = radeon_gem_handle_lockup(rdev, r);
return r;
}
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 0882554..5b37e28 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -801,9 +801,13 @@
int i;
for (i = 0; i < RADEON_NUM_RINGS; ++i) {
- not_processed += radeon_fence_count_emitted(rdev, i);
- if (not_processed >= 3)
- break;
+ struct radeon_ring *ring = &rdev->ring[i];
+
+ if (ring->ready) {
+ not_processed += radeon_fence_count_emitted(rdev, i);
+ if (not_processed >= 3)
+ break;
+ }
}
if (not_processed >= 3) { /* should upclock */
diff --git a/drivers/gpu/drm/radeon/radeon_prime.c b/drivers/gpu/drm/radeon/radeon_prime.c
index 8ddab4c7..6bef46a 100644
--- a/drivers/gpu/drm/radeon/radeon_prime.c
+++ b/drivers/gpu/drm/radeon/radeon_prime.c
@@ -169,11 +169,17 @@
struct radeon_bo *bo = gem_to_radeon_bo(obj);
int ret = 0;
- /* pin buffer into GTT */
- ret = radeon_bo_pin(bo, RADEON_GEM_DOMAIN_GTT, NULL);
- if (ret)
+ ret = radeon_bo_reserve(bo, false);
+ if (unlikely(ret != 0))
return ERR_PTR(ret);
+ /* pin buffer into GTT */
+ ret = radeon_bo_pin(bo, RADEON_GEM_DOMAIN_GTT, NULL);
+ if (ret) {
+ radeon_bo_unreserve(bo);
+ return ERR_PTR(ret);
+ }
+ radeon_bo_unreserve(bo);
return dma_buf_export(bo, &radeon_dmabuf_ops, obj->size, flags);
}
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 4ad0281..b4f51c5 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -616,6 +616,9 @@
ACK_FLUSH_CTL(3) |
SYNC_FLUSH_CTL));
+ if (rdev->family != CHIP_RV770)
+ WREG32(SMX_SAR_CTL0, 0x00003f3f);
+
db_debug3 = RREG32(DB_DEBUG3);
db_debug3 &= ~DB_CLK_OFF_DELAY(0x1f);
switch (rdev->family) {
@@ -792,7 +795,7 @@
WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA |
NUM_CLIP_SEQ(3)));
-
+ WREG32(VC_ENHANCE, 0);
}
void r700_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
diff --git a/drivers/gpu/drm/radeon/rv770d.h b/drivers/gpu/drm/radeon/rv770d.h
index fdc0898..b0adfc5 100644
--- a/drivers/gpu/drm/radeon/rv770d.h
+++ b/drivers/gpu/drm/radeon/rv770d.h
@@ -211,6 +211,7 @@
#define SCRATCH_UMSK 0x8540
#define SCRATCH_ADDR 0x8544
+#define SMX_SAR_CTL0 0xA008
#define SMX_DC_CTL0 0xA020
#define USE_HASH_FUNCTION (1 << 0)
#define CACHE_DEPTH(x) ((x) << 1)
@@ -310,6 +311,8 @@
#define TCP_CNTL 0x9610
#define TCP_CHAN_STEER 0x9614
+#define VC_ENHANCE 0x9714
+
#define VGT_CACHE_INVALIDATION 0x88C4
#define CACHE_INVALIDATION(x) ((x)<<0)
#define VC_ONLY 0
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index c7b61f1..0b02792 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -2365,12 +2365,12 @@
WREG32(0x15DC, 0);
/* empty context1-15 */
- /* FIXME start with 1G, once using 2 level pt switch to full
+ /* FIXME start with 4G, once using 2 level pt switch to full
* vm size space
*/
/* set vm size, must be a multiple of 4 */
WREG32(VM_CONTEXT1_PAGE_TABLE_START_ADDR, 0);
- WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, (1 << 30) / RADEON_GPU_PAGE_SIZE);
+ WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, rdev->vm_manager.max_pfn);
for (i = 1; i < 16; i++) {
if (i < 8)
WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2),
diff --git a/drivers/gpu/drm/radeon/si_reg.h b/drivers/gpu/drm/radeon/si_reg.h
index eda938a..501f9d43 100644
--- a/drivers/gpu/drm/radeon/si_reg.h
+++ b/drivers/gpu/drm/radeon/si_reg.h
@@ -30,4 +30,76 @@
#define SI_DC_GPIO_HPD_EN 0x65b8
#define SI_DC_GPIO_HPD_Y 0x65bc
+#define SI_GRPH_CONTROL 0x6804
+# define SI_GRPH_DEPTH(x) (((x) & 0x3) << 0)
+# define SI_GRPH_DEPTH_8BPP 0
+# define SI_GRPH_DEPTH_16BPP 1
+# define SI_GRPH_DEPTH_32BPP 2
+# define SI_GRPH_NUM_BANKS(x) (((x) & 0x3) << 2)
+# define SI_ADDR_SURF_2_BANK 0
+# define SI_ADDR_SURF_4_BANK 1
+# define SI_ADDR_SURF_8_BANK 2
+# define SI_ADDR_SURF_16_BANK 3
+# define SI_GRPH_Z(x) (((x) & 0x3) << 4)
+# define SI_GRPH_BANK_WIDTH(x) (((x) & 0x3) << 6)
+# define SI_ADDR_SURF_BANK_WIDTH_1 0
+# define SI_ADDR_SURF_BANK_WIDTH_2 1
+# define SI_ADDR_SURF_BANK_WIDTH_4 2
+# define SI_ADDR_SURF_BANK_WIDTH_8 3
+# define SI_GRPH_FORMAT(x) (((x) & 0x7) << 8)
+/* 8 BPP */
+# define SI_GRPH_FORMAT_INDEXED 0
+/* 16 BPP */
+# define SI_GRPH_FORMAT_ARGB1555 0
+# define SI_GRPH_FORMAT_ARGB565 1
+# define SI_GRPH_FORMAT_ARGB4444 2
+# define SI_GRPH_FORMAT_AI88 3
+# define SI_GRPH_FORMAT_MONO16 4
+# define SI_GRPH_FORMAT_BGRA5551 5
+/* 32 BPP */
+# define SI_GRPH_FORMAT_ARGB8888 0
+# define SI_GRPH_FORMAT_ARGB2101010 1
+# define SI_GRPH_FORMAT_32BPP_DIG 2
+# define SI_GRPH_FORMAT_8B_ARGB2101010 3
+# define SI_GRPH_FORMAT_BGRA1010102 4
+# define SI_GRPH_FORMAT_8B_BGRA1010102 5
+# define SI_GRPH_FORMAT_RGB111110 6
+# define SI_GRPH_FORMAT_BGR101111 7
+# define SI_GRPH_BANK_HEIGHT(x) (((x) & 0x3) << 11)
+# define SI_ADDR_SURF_BANK_HEIGHT_1 0
+# define SI_ADDR_SURF_BANK_HEIGHT_2 1
+# define SI_ADDR_SURF_BANK_HEIGHT_4 2
+# define SI_ADDR_SURF_BANK_HEIGHT_8 3
+# define SI_GRPH_TILE_SPLIT(x) (((x) & 0x7) << 13)
+# define SI_ADDR_SURF_TILE_SPLIT_64B 0
+# define SI_ADDR_SURF_TILE_SPLIT_128B 1
+# define SI_ADDR_SURF_TILE_SPLIT_256B 2
+# define SI_ADDR_SURF_TILE_SPLIT_512B 3
+# define SI_ADDR_SURF_TILE_SPLIT_1KB 4
+# define SI_ADDR_SURF_TILE_SPLIT_2KB 5
+# define SI_ADDR_SURF_TILE_SPLIT_4KB 6
+# define SI_GRPH_MACRO_TILE_ASPECT(x) (((x) & 0x3) << 18)
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_1 0
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_2 1
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_4 2
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_8 3
+# define SI_GRPH_ARRAY_MODE(x) (((x) & 0x7) << 20)
+# define SI_GRPH_ARRAY_LINEAR_GENERAL 0
+# define SI_GRPH_ARRAY_LINEAR_ALIGNED 1
+# define SI_GRPH_ARRAY_1D_TILED_THIN1 2
+# define SI_GRPH_ARRAY_2D_TILED_THIN1 4
+# define SI_GRPH_PIPE_CONFIG(x) (((x) & 0x1f) << 24)
+# define SI_ADDR_SURF_P2 0
+# define SI_ADDR_SURF_P4_8x16 4
+# define SI_ADDR_SURF_P4_16x16 5
+# define SI_ADDR_SURF_P4_16x32 6
+# define SI_ADDR_SURF_P4_32x32 7
+# define SI_ADDR_SURF_P8_16x16_8x16 8
+# define SI_ADDR_SURF_P8_16x32_8x16 9
+# define SI_ADDR_SURF_P8_32x32_8x16 10
+# define SI_ADDR_SURF_P8_16x32_16x16 11
+# define SI_ADDR_SURF_P8_32x32_16x16 12
+# define SI_ADDR_SURF_P8_32x32_16x32 13
+# define SI_ADDR_SURF_P8_32x64_32x32 14
+
#endif
diff --git a/drivers/gpu/drm/sis/sis_drv.c b/drivers/gpu/drm/sis/sis_drv.c
index 30d98d1..dd14cd1 100644
--- a/drivers/gpu/drm/sis/sis_drv.c
+++ b/drivers/gpu/drm/sis/sis_drv.c
@@ -47,9 +47,9 @@
if (dev_priv == NULL)
return -ENOMEM;
+ idr_init(&dev_priv->object_idr);
dev->dev_private = (void *)dev_priv;
dev_priv->chipset = chipset;
- idr_init(&dev->object_name_idr);
return 0;
}
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index b67cfca..36f4b28 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -1204,6 +1204,7 @@
(*destroy)(bo);
else
kfree(bo);
+ ttm_mem_global_free(mem_glob, acc_size);
return -EINVAL;
}
bo->destroy = destroy;
@@ -1307,22 +1308,14 @@
struct ttm_buffer_object **p_bo)
{
struct ttm_buffer_object *bo;
- struct ttm_mem_global *mem_glob = bdev->glob->mem_glob;
size_t acc_size;
int ret;
- acc_size = ttm_bo_acc_size(bdev, size, sizeof(struct ttm_buffer_object));
- ret = ttm_mem_global_alloc(mem_glob, acc_size, false, false);
- if (unlikely(ret != 0))
- return ret;
-
bo = kzalloc(sizeof(*bo), GFP_KERNEL);
-
- if (unlikely(bo == NULL)) {
- ttm_mem_global_free(mem_glob, acc_size);
+ if (unlikely(bo == NULL))
return -ENOMEM;
- }
+ acc_size = ttm_bo_acc_size(bdev, size, sizeof(struct ttm_buffer_object));
ret = ttm_bo_init(bdev, bo, size, type, placement, page_alignment,
buffer_start, interruptible,
persistent_swap_storage, acc_size, NULL, NULL);
diff --git a/drivers/gpu/drm/udl/udl_drv.c b/drivers/gpu/drm/udl/udl_drv.c
index 4d02c46..6e52069 100644
--- a/drivers/gpu/drm/udl/udl_drv.c
+++ b/drivers/gpu/drm/udl/udl_drv.c
@@ -13,8 +13,21 @@
static struct drm_driver driver;
+/*
+ * There are many DisplayLink-based graphics products, all with unique PIDs.
+ * So we match on DisplayLink's VID + Vendor-Defined Interface Class (0xff)
+ * We also require a match on SubClass (0x00) and Protocol (0x00),
+ * which is compatible with all known USB 2.0 era graphics chips and firmware,
+ * but allows DisplayLink to increment those for any future incompatible chips
+ */
static struct usb_device_id id_table[] = {
- {.idVendor = 0x17e9, .match_flags = USB_DEVICE_ID_MATCH_VENDOR,},
+ {.idVendor = 0x17e9, .bInterfaceClass = 0xff,
+ .bInterfaceSubClass = 0x00,
+ .bInterfaceProtocol = 0x00,
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS |
+ USB_DEVICE_ID_MATCH_INT_PROTOCOL,},
{},
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/gpu/drm/udl/udl_main.c b/drivers/gpu/drm/udl/udl_main.c
index a8d5f09..4c2d836 100644
--- a/drivers/gpu/drm/udl/udl_main.c
+++ b/drivers/gpu/drm/udl/udl_main.c
@@ -61,7 +61,7 @@
u8 length;
u16 key;
- key = *((u16 *) desc);
+ key = le16_to_cpu(*((u16 *) desc));
desc += sizeof(u16);
length = *desc;
desc++;
diff --git a/drivers/gpu/drm/via/via_map.c b/drivers/gpu/drm/via/via_map.c
index 1f18225..c126182 100644
--- a/drivers/gpu/drm/via/via_map.c
+++ b/drivers/gpu/drm/via/via_map.c
@@ -100,12 +100,11 @@
if (dev_priv == NULL)
return -ENOMEM;
+ idr_init(&dev_priv->object_idr);
dev->dev_private = (void *)dev_priv;
dev_priv->chipset = chipset;
- idr_init(&dev->object_name_idr);
-
pci_set_master(dev->pdev);
ret = drm_vblank_init(dev, 1);
diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c
index 38f9534..5b3c7d1 100644
--- a/drivers/gpu/vga/vga_switcheroo.c
+++ b/drivers/gpu/vga/vga_switcheroo.c
@@ -190,6 +190,19 @@
return NULL;
}
+int vga_switcheroo_get_client_state(struct pci_dev *pdev)
+{
+ struct vga_switcheroo_client *client;
+
+ client = find_client_from_pci(&vgasr_priv.clients, pdev);
+ if (!client)
+ return VGA_SWITCHEROO_NOT_FOUND;
+ if (!vgasr_priv.active)
+ return VGA_SWITCHEROO_INIT;
+ return client->pwr_state;
+}
+EXPORT_SYMBOL(vga_switcheroo_get_client_state);
+
void vga_switcheroo_unregister_client(struct pci_dev *pdev)
{
struct vga_switcheroo_client *client;
@@ -291,8 +304,6 @@
vga_switchon(new_client);
vga_set_default_device(new_client->pdev);
- set_audio_state(new_client->id, VGA_SWITCHEROO_ON);
-
return 0;
}
@@ -308,6 +319,8 @@
active->active = false;
+ set_audio_state(active->id, VGA_SWITCHEROO_OFF);
+
if (new_client->fb_info) {
struct fb_event event;
event.info = new_client->fb_info;
@@ -321,11 +334,11 @@
if (new_client->ops->reprobe)
new_client->ops->reprobe(new_client->pdev);
- set_audio_state(active->id, VGA_SWITCHEROO_OFF);
-
if (active->pwr_state == VGA_SWITCHEROO_ON)
vga_switchoff(active);
+ set_audio_state(new_client->id, VGA_SWITCHEROO_ON);
+
new_client->active = true;
return 0;
}
@@ -371,8 +384,9 @@
/* pwr off the device not in use */
if (strncmp(usercmd, "OFF", 3) == 0) {
list_for_each_entry(client, &vgasr_priv.clients, list) {
- if (client->active)
+ if (client->active || client_is_audio(client))
continue;
+ set_audio_state(client->id, VGA_SWITCHEROO_OFF);
if (client->pwr_state == VGA_SWITCHEROO_ON)
vga_switchoff(client);
}
@@ -381,10 +395,11 @@
/* pwr on the device not in use */
if (strncmp(usercmd, "ON", 2) == 0) {
list_for_each_entry(client, &vgasr_priv.clients, list) {
- if (client->active)
+ if (client->active || client_is_audio(client))
continue;
if (client->pwr_state == VGA_SWITCHEROO_OFF)
vga_switchon(client);
+ set_audio_state(client->id, VGA_SWITCHEROO_ON);
}
goto out;
}
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 034c80a..3fda8c8 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -1,20 +1,11 @@
#
# HID driver configuration
#
-menuconfig HID_SUPPORT
- bool "HID Devices"
- depends on INPUT
- default y
- ---help---
- Say Y here to get to see options for various computer-human interface
- device drivers. This option alone does not add any kernel code.
-
- If you say N, all options in this submenu will be skipped and disabled.
-
-if HID_SUPPORT
+menu "HID support"
+ depends on INPUT
config HID
- tristate "Generic HID support"
+ tristate "HID bus support"
depends on INPUT
default y
---help---
@@ -23,14 +14,17 @@
most commonly used to refer to the USB-HID specification, but other
devices (such as, but not strictly limited to, Bluetooth) are
designed using HID specification (this involves certain keyboards,
- mice, tablets, etc). This option compiles into kernel the generic
- HID layer code (parser, usages, etc.), which can then be used by
- transport-specific HID implementation (like USB or Bluetooth).
+ mice, tablets, etc). This option adds the HID bus to the kernel,
+ together with generic HID layer code. The HID devices are added and
+ removed from the HID bus by the transport-layer drivers, such as
+ usbhid (USB_HID) and hidp (BT_HIDP).
For docs and specs, see http://www.usb.org/developers/hidpage/
If unsure, say Y.
+if HID
+
config HID_BATTERY_STRENGTH
bool "Battery level reporting for HID devices"
depends on HID && POWER_SUPPLY && HID = POWER_SUPPLY
@@ -59,23 +53,22 @@
If unsure, say Y.
-source "drivers/hid/usbhid/Kconfig"
-
-menu "Special HID drivers"
- depends on HID
-
config HID_GENERIC
tristate "Generic HID driver"
depends on HID
- default y
+ default HID
---help---
- Support for generic HID devices.
+ Support for generic devices on the HID bus. This includes most
+ keyboards and mice, joysticks, tablets and digitizers.
To compile this driver as a module, choose M here: the module
will be called hid-generic.
If unsure, say Y.
+menu "Special HID drivers"
+ depends on HID
+
config HID_A4TECH
tristate "A4 tech mice" if EXPERT
depends on USB_HID
@@ -393,6 +386,7 @@
- Unitec Panels
- XAT optical touch panels
- Xiroku optical touch panels
+ - Zytronic touch panels
If unsure, say N.
@@ -662,4 +656,8 @@
endmenu
-endif # HID_SUPPORT
+endif # HID
+
+source "drivers/hid/usbhid/Kconfig"
+
+endmenu
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index fa10f84..585344b 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -517,6 +517,12 @@
.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS),
.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI),
+ .driver_data = APPLE_HAS_FN },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO),
+ .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
+ .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 8e3a6b2..4c87276 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1503,6 +1503,9 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
@@ -1880,6 +1883,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM)},
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM2)},
{ HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_AXENTIA, USB_DEVICE_ID_AXENTIA_FM_RADIO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) },
@@ -1994,6 +1998,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MCT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_BEATPAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT1) },
@@ -2088,6 +2093,9 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ }
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 9373f53..3203923 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -125,6 +125,9 @@
#define USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI 0x024c
#define USB_DEVICE_ID_APPLE_WELLSPRING6_ISO 0x024d
#define USB_DEVICE_ID_APPLE_WELLSPRING6_JIS 0x024e
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b
@@ -160,6 +163,9 @@
#define USB_VENDOR_ID_AVERMEDIA 0x07ca
#define USB_DEVICE_ID_AVER_FM_MR800 0xb800
+#define USB_VENDOR_ID_AXENTIA 0x12cf
+#define USB_DEVICE_ID_AXENTIA_FM_RADIO 0x7111
+
#define USB_VENDOR_ID_BAANTO 0x2453
#define USB_DEVICE_ID_BAANTO_MT_190W2 0x0100
@@ -515,6 +521,9 @@
#define USB_DEVICE_ID_CRYSTALTOUCH 0x0006
#define USB_DEVICE_ID_CRYSTALTOUCH_DUAL 0x0007
+#define USB_VENDOR_ID_MADCATZ 0x0738
+#define USB_DEVICE_ID_MADCATZ_BEATPAD 0x4540
+
#define USB_VENDOR_ID_MCC 0x09db
#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
#define USB_DEVICE_ID_MCC_PMD1208LS 0x007a
@@ -650,6 +659,9 @@
#define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001
#define USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE 0x0600
+#define USB_VENDOR_ID_SENNHEISER 0x1395
+#define USB_DEVICE_ID_SENNHEISER_BTD500USB 0x002c
+
#define USB_VENDOR_ID_SIGMA_MICRO 0x1c4f
#define USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD 0x0002
@@ -799,6 +811,9 @@
#define USB_VENDOR_ID_ZYDACRON 0x13EC
#define USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL 0x0006
+#define USB_VENDOR_ID_ZYTRONIC 0x14c8
+#define USB_DEVICE_ID_ZYTRONIC_ZXY100 0x0005
+
#define USB_VENDOR_ID_PRIMAX 0x0461
#define USB_DEVICE_ID_PRIMAX_KEYBOARD 0x4e05
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 132b001..5301006 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -301,6 +301,9 @@
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI),
HID_BATTERY_QUIRK_PERCENT | HID_BATTERY_QUIRK_FEATURE },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
+ USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
+ HID_BATTERY_QUIRK_PERCENT | HID_BATTERY_QUIRK_FEATURE },
{}
};
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 5e8a7ed..0f9c146 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -436,27 +436,37 @@
static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
{
- struct dj_report dj_report;
+ struct dj_report *dj_report;
+ int retval;
- memset(&dj_report, 0, sizeof(dj_report));
- dj_report.report_id = REPORT_ID_DJ_SHORT;
- dj_report.device_index = 0xFF;
- dj_report.report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
- return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+ dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+ if (!dj_report)
+ return -ENOMEM;
+ dj_report->report_id = REPORT_ID_DJ_SHORT;
+ dj_report->device_index = 0xFF;
+ dj_report->report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
+ retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
+ kfree(dj_report);
+ return retval;
}
static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
unsigned timeout)
{
- struct dj_report dj_report;
+ struct dj_report *dj_report;
+ int retval;
- memset(&dj_report, 0, sizeof(dj_report));
- dj_report.report_id = REPORT_ID_DJ_SHORT;
- dj_report.device_index = 0xFF;
- dj_report.report_type = REPORT_TYPE_CMD_SWITCH;
- dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
- dj_report.report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
- return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+ dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+ if (!dj_report)
+ return -ENOMEM;
+ dj_report->report_id = REPORT_ID_DJ_SHORT;
+ dj_report->device_index = 0xFF;
+ dj_report->report_type = REPORT_TYPE_CMD_SWITCH;
+ dj_report->report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
+ dj_report->report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
+ retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
+ kfree(dj_report);
+ return retval;
}
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index 7cf3ffe..40ac665 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -426,8 +426,10 @@
__set_bit(EV_ABS, input->evbit);
input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 15, 0, 0);
- input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 4, 0);
- input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 4, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255 << 2,
+ 4, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255 << 2,
+ 4, 0);
input_set_abs_params(input, ABS_MT_ORIENTATION, -31, 32, 1, 0);
/* Note: Touch Y position from the device is inverted relative
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 6e3332a..7647924 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -1048,6 +1048,11 @@
MT_USB_DEVICE(USB_VENDOR_ID_XIROKU,
USB_DEVICE_ID_XIROKU_CSR2) },
+ /* Zytronic panels */
+ { .driver_data = MT_CLS_SERIAL,
+ MT_USB_DEVICE(USB_VENDOR_ID_ZYTRONIC,
+ USB_DEVICE_ID_ZYTRONIC_ZXY100) },
+
/* Generic MT device */
{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_MULTITOUCH, HID_ANY_ID, HID_ANY_ID) },
{ }
diff --git a/drivers/hid/usbhid/Kconfig b/drivers/hid/usbhid/Kconfig
index 0f20fd1..0108c59 100644
--- a/drivers/hid/usbhid/Kconfig
+++ b/drivers/hid/usbhid/Kconfig
@@ -1,13 +1,13 @@
-comment "USB Input Devices"
+menu "USB HID support"
depends on USB
config USB_HID
- tristate "USB Human Interface Device (full HID) support"
+ tristate "USB HID transport layer"
default y
depends on USB && INPUT
select HID
---help---
- Say Y here if you want full HID support to connect USB keyboards,
+ Say Y here if you want to connect USB keyboards,
mice, joysticks, graphic tablets, or any other HID based devices
to your computer via USB, as well as Uninterruptible Power Supply
(UPS) and monitor control devices.
@@ -81,4 +81,4 @@
endmenu
-
+endmenu
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 0597ee6..903eef3 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -76,6 +76,7 @@
{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_1, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_2, HID_QUIRK_NOGET },
diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c
index 34ad5a2..e3fcf81 100644
--- a/drivers/hwmon/acpi_power_meter.c
+++ b/drivers/hwmon/acpi_power_meter.c
@@ -929,20 +929,25 @@
return 0;
}
-static int acpi_power_meter_resume(struct acpi_device *device)
+static int acpi_power_meter_resume(struct device *dev)
{
struct acpi_power_meter_resource *resource;
- if (!device || !acpi_driver_data(device))
+ if (!dev)
return -EINVAL;
- resource = acpi_driver_data(device);
+ resource = acpi_driver_data(to_acpi_device(dev));
+ if (!resource)
+ return -EINVAL;
+
free_capabilities(resource);
read_capabilities(resource);
return 0;
}
+static SIMPLE_DEV_PM_OPS(acpi_power_meter_pm, NULL, acpi_power_meter_resume);
+
static struct acpi_driver acpi_power_meter_driver = {
.name = "power_meter",
.class = ACPI_POWER_METER_CLASS,
@@ -950,9 +955,9 @@
.ops = {
.add = acpi_power_meter_add,
.remove = acpi_power_meter_remove,
- .resume = acpi_power_meter_resume,
.notify = acpi_power_meter_notify,
},
+ .drv.pm = &acpi_power_meter_pm,
};
/* Module init/exit routines */
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index f082e48..2cde9ec 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -8,7 +8,7 @@
*
* Based on hdaps.c driver:
* Copyright (C) 2005 Robert Love <rml@novell.com>
- * Copyright (C) 2005 Jesper Juhl <jesper.juhl@gmail.com>
+ * Copyright (C) 2005 Jesper Juhl <jj@chaosbits.net>
*
* Fan control based on smcFanControl:
* Copyright (C) 2006 Hendrik Holtmann <holtmann@mac.com>
@@ -215,7 +215,7 @@
int i;
if (send_command(cmd) || send_argument(key)) {
- pr_warn("%s: read arg fail\n", key);
+ pr_warn("%.4s: read arg fail\n", key);
return -EIO;
}
@@ -223,7 +223,7 @@
for (i = 0; i < len; i++) {
if (__wait_status(0x05)) {
- pr_warn("%s: read data fail\n", key);
+ pr_warn("%.4s: read data fail\n", key);
return -EIO;
}
buffer[i] = inb(APPLESMC_DATA_PORT);
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index b9d5123..637c51c 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -191,6 +191,24 @@
return tdata->valid ? sprintf(buf, "%d\n", tdata->temp) : -EAGAIN;
}
+struct tjmax {
+ char const *id;
+ int tjmax;
+};
+
+static struct tjmax __cpuinitconst tjmax_table[] = {
+ { "CPU D410", 100000 },
+ { "CPU D425", 100000 },
+ { "CPU D510", 100000 },
+ { "CPU D525", 100000 },
+ { "CPU N450", 100000 },
+ { "CPU N455", 100000 },
+ { "CPU N470", 100000 },
+ { "CPU N475", 100000 },
+ { "CPU 230", 100000 },
+ { "CPU 330", 125000 },
+};
+
static int __cpuinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id,
struct device *dev)
{
@@ -202,6 +220,13 @@
int err;
u32 eax, edx;
struct pci_dev *host_bridge;
+ int i;
+
+ /* explicit tjmax table entries override heuristics */
+ for (i = 0; i < ARRAY_SIZE(tjmax_table); i++) {
+ if (strstr(c->x86_model_id, tjmax_table[i].id))
+ return tjmax_table[i].tjmax;
+ }
/* Early chips have no MSR for TjMax */
@@ -210,7 +235,8 @@
/* Atom CPUs */
- if (c->x86_model == 0x1c) {
+ if (c->x86_model == 0x1c || c->x86_model == 0x26
+ || c->x86_model == 0x27) {
usemsr_ee = 0;
host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
@@ -223,6 +249,9 @@
tjmax = 90000;
pci_dev_put(host_bridge);
+ } else if (c->x86_model == 0x36) {
+ usemsr_ee = 0;
+ tjmax = 100000;
}
if (c->x86_model > 0xe && usemsr_ee) {
@@ -664,7 +693,7 @@
* sensors. We check this bit only, all the early CPUs
* without thermal sensors will be filtered out.
*/
- if (!cpu_has(c, X86_FEATURE_DTS))
+ if (!cpu_has(c, X86_FEATURE_DTHERM))
return;
if (!pdev) {
@@ -765,14 +794,14 @@
};
static const struct x86_cpu_id coretemp_ids[] = {
- { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_DTS },
+ { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_DTHERM },
{}
};
MODULE_DEVICE_TABLE(x86cpu, coretemp_ids);
static int __init coretemp_init(void)
{
- int i, err = -ENODEV;
+ int i, err;
/*
* CPUID.06H.EAX[0] indicates whether the CPU has thermal
diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c
index 9691f66..e7d234b 100644
--- a/drivers/hwmon/emc2103.c
+++ b/drivers/hwmon/emc2103.c
@@ -451,11 +451,15 @@
data->fan_rpm_control = true;
break;
default:
- mutex_unlock(&data->update_lock);
- return -EINVAL;
+ count = -EINVAL;
+ goto err;
}
- read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg);
+ result = read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg);
+ if (result) {
+ count = result;
+ goto err;
+ }
if (data->fan_rpm_control)
conf_reg |= 0x80;
@@ -463,7 +467,7 @@
conf_reg &= ~0x80;
i2c_smbus_write_byte_data(client, REG_FAN_CONF1, conf_reg);
-
+err:
mutex_unlock(&data->update_lock);
return count;
}
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index e7701d9..f1de397 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -2341,7 +2341,7 @@
/* Start monitoring */
it87_write_value(data, IT87_REG_CONFIG,
- (it87_read_value(data, IT87_REG_CONFIG) & 0x36)
+ (it87_read_value(data, IT87_REG_CONFIG) & 0x3e)
| (update_vbat ? 0x41 : 0x01));
}
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index a9bfd67..e72ba5d 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -590,6 +590,6 @@
module_i2c_driver(jc42_driver);
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("JC42 driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 7356b5e..f2fe807 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -33,9 +33,6 @@
module_param(force, bool, 0444);
MODULE_PARM_DESC(force, "force loading on processors with erratum 319");
-/* PCI-IDs for Northbridge devices not used anywhere else */
-#define PCI_DEVICE_ID_AMD_15H_M10H_NB_F3 0x1403
-
/* CPUID function 0x80000001, ebx */
#define CPUID_PKGTYPE_MASK 0xf0000000
#define CPUID_PKGTYPE_F 0x00000000
@@ -213,7 +210,7 @@
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_NB_F3) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
{}
};
MODULE_DEVICE_TABLE(pci, k10temp_id_table);
diff --git a/drivers/hwmon/lineage-pem.c b/drivers/hwmon/lineage-pem.c
index d264937..bd75d24 100644
--- a/drivers/hwmon/lineage-pem.c
+++ b/drivers/hwmon/lineage-pem.c
@@ -567,6 +567,6 @@
module_i2c_driver(pem_driver);
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("Lineage CPL PEM hardware monitoring driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/ltc4261.c b/drivers/hwmon/ltc4261.c
index 069b7d3..77476a5 100644
--- a/drivers/hwmon/ltc4261.c
+++ b/drivers/hwmon/ltc4261.c
@@ -292,6 +292,6 @@
module_i2c_driver(ltc4261_driver);
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("LTC4261 driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/max16065.c b/drivers/hwmon/max16065.c
index 822261b..019427d 100644
--- a/drivers/hwmon/max16065.c
+++ b/drivers/hwmon/max16065.c
@@ -692,6 +692,6 @@
module_i2c_driver(max16065_driver);
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("MAX16065 driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/hwspinlock/hwspinlock_core.c b/drivers/hwspinlock/hwspinlock_core.c
index 61c9cf1..1201a15 100644
--- a/drivers/hwspinlock/hwspinlock_core.c
+++ b/drivers/hwspinlock/hwspinlock_core.c
@@ -345,7 +345,7 @@
spin_lock_init(&hwlock->lock);
hwlock->bank = bank;
- ret = hwspin_lock_register_single(hwlock, i);
+ ret = hwspin_lock_register_single(hwlock, base_id + i);
if (ret)
goto reg_failed;
}
@@ -354,7 +354,7 @@
reg_failed:
while (--i >= 0)
- hwspin_lock_unregister_single(i);
+ hwspin_lock_unregister_single(base_id + i);
return ret;
}
EXPORT_SYMBOL_GPL(hwspin_lock_register);
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 8d6b504..370031a 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -53,7 +53,6 @@
#include <linux/of_i2c.h>
#include <linux/pinctrl/consumer.h>
-#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/i2c.h>
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 5267ab9..a92440d 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -965,8 +965,7 @@
adap->owner = THIS_MODULE;
adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adap->algo = &nmk_i2c_algo;
- adap->timeout = pdata->timeout ? msecs_to_jiffies(pdata->timeout) :
- msecs_to_jiffies(20000);
+ adap->timeout = msecs_to_jiffies(pdata->timeout);
snprintf(adap->name, sizeof(adap->name),
"Nomadik I2C%d at %lx", pdev->id, (unsigned long)res->start);
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 31c47e1..5285f85 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -227,28 +227,138 @@
return 0;
}
+static u32 __devinit i2c_powermac_get_addr(struct i2c_adapter *adap,
+ struct pmac_i2c_bus *bus,
+ struct device_node *node)
+{
+ const __be32 *prop;
+ int len;
+
+ /* First check for valid "reg" */
+ prop = of_get_property(node, "reg", &len);
+ if (prop && (len >= sizeof(int)))
+ return (be32_to_cpup(prop) & 0xff) >> 1;
+
+ /* Then check old-style "i2c-address" */
+ prop = of_get_property(node, "i2c-address", &len);
+ if (prop && (len >= sizeof(int)))
+ return (be32_to_cpup(prop) & 0xff) >> 1;
+
+ /* Now handle some devices with missing "reg" properties */
+ if (!strcmp(node->name, "cereal"))
+ return 0x60;
+ else if (!strcmp(node->name, "deq"))
+ return 0x34;
+
+ dev_warn(&adap->dev, "No i2c address for %s\n", node->full_name);
+
+ return 0xffffffff;
+}
+
+static void __devinit i2c_powermac_create_one(struct i2c_adapter *adap,
+ const char *type,
+ u32 addr)
+{
+ struct i2c_board_info info = {};
+ struct i2c_client *newdev;
+
+ strncpy(info.type, type, sizeof(info.type));
+ info.addr = addr;
+ newdev = i2c_new_device(adap, &info);
+ if (!newdev)
+ dev_err(&adap->dev,
+ "i2c-powermac: Failure to register missing %s\n",
+ type);
+}
+
+static void __devinit i2c_powermac_add_missing(struct i2c_adapter *adap,
+ struct pmac_i2c_bus *bus,
+ bool found_onyx)
+{
+ struct device_node *busnode = pmac_i2c_get_bus_node(bus);
+ int rc;
+
+ /* Check for the onyx audio codec */
+#define ONYX_REG_CONTROL 67
+ if (of_device_is_compatible(busnode, "k2-i2c") && !found_onyx) {
+ union i2c_smbus_data data;
+
+ rc = i2c_smbus_xfer(adap, 0x46, 0, I2C_SMBUS_READ,
+ ONYX_REG_CONTROL, I2C_SMBUS_BYTE_DATA,
+ &data);
+ if (rc >= 0)
+ i2c_powermac_create_one(adap, "MAC,pcm3052", 0x46);
+
+ rc = i2c_smbus_xfer(adap, 0x47, 0, I2C_SMBUS_READ,
+ ONYX_REG_CONTROL, I2C_SMBUS_BYTE_DATA,
+ &data);
+ if (rc >= 0)
+ i2c_powermac_create_one(adap, "MAC,pcm3052", 0x47);
+ }
+}
+
+static bool __devinit i2c_powermac_get_type(struct i2c_adapter *adap,
+ struct device_node *node,
+ u32 addr, char *type, int type_size)
+{
+ char tmp[16];
+
+ /* Note: we to _NOT_ want the standard
+ * i2c drivers to match with any of our powermac stuff
+ * unless they have been specifically modified to handle
+ * it on a case by case basis. For example, for thermal
+ * control, things like lm75 etc... shall match with their
+ * corresponding windfarm drivers, _NOT_ the generic ones,
+ * so we force a prefix of AAPL, onto the modalias to
+ * make that happen
+ */
+
+ /* First try proper modalias */
+ if (of_modalias_node(node, tmp, sizeof(tmp)) >= 0) {
+ snprintf(type, type_size, "MAC,%s", tmp);
+ return true;
+ }
+
+ /* Now look for known workarounds */
+ if (!strcmp(node->name, "deq")) {
+ /* Apple uses address 0x34 for TAS3001 and 0x35 for TAS3004 */
+ if (addr == 0x34) {
+ snprintf(type, type_size, "MAC,tas3001");
+ return true;
+ } else if (addr == 0x35) {
+ snprintf(type, type_size, "MAC,tas3004");
+ return true;
+ }
+ }
+
+ dev_err(&adap->dev, "i2c-powermac: modalias failure"
+ " on %s\n", node->full_name);
+ return false;
+}
+
static void __devinit i2c_powermac_register_devices(struct i2c_adapter *adap,
struct pmac_i2c_bus *bus)
{
struct i2c_client *newdev;
struct device_node *node;
+ bool found_onyx = 0;
+
+ /*
+ * In some cases we end up with the via-pmu node itself, in this
+ * case we skip this function completely as the device-tree will
+ * not contain anything useful.
+ */
+ if (!strcmp(adap->dev.of_node->name, "via-pmu"))
+ return;
for_each_child_of_node(adap->dev.of_node, node) {
struct i2c_board_info info = {};
- struct dev_archdata dev_ad = {};
- const __be32 *reg;
- char tmp[16];
u32 addr;
- int len;
/* Get address & channel */
- reg = of_get_property(node, "reg", &len);
- if (!reg || (len < sizeof(int))) {
- dev_err(&adap->dev, "i2c-powermac: invalid reg on %s\n",
- node->full_name);
+ addr = i2c_powermac_get_addr(adap, bus, node);
+ if (addr == 0xffffffff)
continue;
- }
- addr = be32_to_cpup(reg);
/* Multibus setup, check channel */
if (!pmac_i2c_match_adapter(node, adap))
@@ -257,27 +367,23 @@
dev_dbg(&adap->dev, "i2c-powermac: register %s\n",
node->full_name);
- /* Make up a modalias. Note: we to _NOT_ want the standard
- * i2c drivers to match with any of our powermac stuff
- * unless they have been specifically modified to handle
- * it on a case by case basis. For example, for thermal
- * control, things like lm75 etc... shall match with their
- * corresponding windfarm drivers, _NOT_ the generic ones,
- * so we force a prefix of AAPL, onto the modalias to
- * make that happen
+ /*
+ * Keep track of some device existence to handle
+ * workarounds later.
*/
- if (of_modalias_node(node, tmp, sizeof(tmp)) < 0) {
- dev_err(&adap->dev, "i2c-powermac: modalias failure"
- " on %s\n", node->full_name);
+ if (of_device_is_compatible(node, "pcm3052"))
+ found_onyx = true;
+
+ /* Make up a modalias */
+ if (!i2c_powermac_get_type(adap, node, addr,
+ info.type, sizeof(info.type))) {
continue;
}
- snprintf(info.type, sizeof(info.type), "MAC,%s", tmp);
/* Fill out the rest of the info structure */
- info.addr = (addr & 0xff) >> 1;
+ info.addr = addr;
info.irq = irq_of_parse_and_map(node, 0);
info.of_node = of_node_get(node);
- info.archdata = &dev_ad;
newdev = i2c_new_device(adap, &info);
if (!newdev) {
@@ -292,6 +398,9 @@
continue;
}
}
+
+ /* Additional workarounds */
+ i2c_powermac_add_missing(adap, bus, found_onyx);
}
static int __devinit i2c_powermac_probe(struct platform_device *dev)
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 8b2e555..3da7ee3 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -341,7 +341,7 @@
u32 val;
int err = 0;
- clk_enable(i2c_dev->clk);
+ clk_prepare_enable(i2c_dev->clk);
tegra_periph_reset_assert(i2c_dev->clk);
udelay(2);
@@ -372,7 +372,7 @@
if (tegra_i2c_flush_fifos(i2c_dev))
err = -ETIMEDOUT;
- clk_disable(i2c_dev->clk);
+ clk_disable_unprepare(i2c_dev->clk);
if (i2c_dev->irq_disabled) {
i2c_dev->irq_disabled = 0;
@@ -546,14 +546,14 @@
if (i2c_dev->is_suspended)
return -EBUSY;
- clk_enable(i2c_dev->clk);
+ clk_prepare_enable(i2c_dev->clk);
for (i = 0; i < num; i++) {
int stop = (i == (num - 1)) ? 1 : 0;
ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], stop);
if (ret)
break;
}
- clk_disable(i2c_dev->clk);
+ clk_disable_unprepare(i2c_dev->clk);
return ret ?: i;
}
@@ -666,7 +666,7 @@
goto err_free;
}
- clk_enable(i2c_dev->i2c_clk);
+ clk_prepare_enable(i2c_dev->i2c_clk);
i2c_set_adapdata(&i2c_dev->adapter, i2c_dev);
i2c_dev->adapter.owner = THIS_MODULE;
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 8716066..bcb507b 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -236,7 +236,7 @@
*/
static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- unsigned long cycle_time;
+ unsigned long cycle_time = 0;
int use_dma_info = 0;
const u8 xfer_mode = drive->dma_mode;
@@ -271,9 +271,9 @@
ide_set_drivedata(drive, (void *)cycle_time);
- printk("%s: %s selected (peak %dMB/s)\n", drive->name,
- ide_xfer_verbose(xfer_mode),
- 2000 / (unsigned long)ide_get_drivedata(drive));
+ printk(KERN_INFO "%s: %s selected (peak %luMB/s)\n",
+ drive->name, ide_xfer_verbose(xfer_mode),
+ 2000 / (cycle_time ? cycle_time : (unsigned long) -1));
}
static const struct ide_port_ops icside_v6_port_ops = {
@@ -375,8 +375,6 @@
.dma_test_irq = icside_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
};
-#else
-#define icside_v6_dma_ops NULL
#endif
static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d)
@@ -456,7 +454,6 @@
static const struct ide_port_info icside_v6_port_info __initdata = {
.init_dma = icside_dma_off_init,
.port_ops = &icside_v6_no_dma_port_ops,
- .dma_ops = &icside_v6_dma_ops,
.host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
.mwdma_mask = ATA_MWDMA2,
.swdma_mask = ATA_SWDMA2,
@@ -518,11 +515,13 @@
ecard_set_drvdata(ec, state);
+#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
d.init_dma = icside_dma_init;
d.port_ops = &icside_v6_port_ops;
- } else
- d.dma_ops = NULL;
+ d.dma_ops = &icside_v6_dma_ops;
+ }
+#endif
ret = ide_host_register(host, &d, hws);
if (ret)
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 28e344e..f1e922e 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -167,7 +167,8 @@
{
int *is_kme = priv_data;
- if (!(pdev->resource[0]->flags & IO_DATA_PATH_WIDTH_8)) {
+ if ((pdev->resource[0]->flags & IO_DATA_PATH_WIDTH)
+ != IO_DATA_PATH_WIDTH_8) {
pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
}
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index d0f59c3..fe95d54 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -96,6 +96,7 @@
static struct cpuidle_device __percpu *intel_idle_cpuidle_devices;
static int intel_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index);
+static int intel_idle_cpu_init(int cpu);
static struct cpuidle_state *cpuidle_state_table;
@@ -302,22 +303,35 @@
clockevents_notify(reason, &cpu);
}
-static int setup_broadcast_cpuhp_notify(struct notifier_block *n,
- unsigned long action, void *hcpu)
+static int cpu_hotplug_notify(struct notifier_block *n,
+ unsigned long action, void *hcpu)
{
int hotcpu = (unsigned long)hcpu;
+ struct cpuidle_device *dev;
switch (action & 0xf) {
case CPU_ONLINE:
- smp_call_function_single(hotcpu, __setup_broadcast_timer,
- (void *)true, 1);
+
+ if (lapic_timer_reliable_states != LAPIC_TIMER_ALWAYS_RELIABLE)
+ smp_call_function_single(hotcpu, __setup_broadcast_timer,
+ (void *)true, 1);
+
+ /*
+ * Some systems can hotplug a cpu at runtime after
+ * the kernel has booted, we have to initialize the
+ * driver in this case
+ */
+ dev = per_cpu_ptr(intel_idle_cpuidle_devices, hotcpu);
+ if (!dev->registered)
+ intel_idle_cpu_init(hotcpu);
+
break;
}
return NOTIFY_OK;
}
-static struct notifier_block setup_broadcast_notifier = {
- .notifier_call = setup_broadcast_cpuhp_notify,
+static struct notifier_block cpu_hotplug_notifier = {
+ .notifier_call = cpu_hotplug_notify,
};
static void auto_demotion_disable(void *dummy)
@@ -405,10 +419,10 @@
if (boot_cpu_has(X86_FEATURE_ARAT)) /* Always Reliable APIC Timer */
lapic_timer_reliable_states = LAPIC_TIMER_ALWAYS_RELIABLE;
- else {
+ else
on_each_cpu(__setup_broadcast_timer, (void *)true, 1);
- register_cpu_notifier(&setup_broadcast_notifier);
- }
+
+ register_cpu_notifier(&cpu_hotplug_notifier);
pr_debug(PREFIX "v" INTEL_IDLE_VERSION
" model 0x%X\n", boot_cpu_data.x86_model);
@@ -494,7 +508,7 @@
* allocate, initialize, register cpuidle_devices
* @cpu: cpu/core to initialize
*/
-int intel_idle_cpu_init(int cpu)
+static int intel_idle_cpu_init(int cpu)
{
int cstate;
struct cpuidle_device *dev;
@@ -539,7 +553,6 @@
return 0;
}
-EXPORT_SYMBOL_GPL(intel_idle_cpu_init);
static int __init intel_idle_init(void)
{
@@ -581,10 +594,10 @@
intel_idle_cpuidle_devices_uninit();
cpuidle_unregister_driver(&intel_idle_driver);
- if (lapic_timer_reliable_states != LAPIC_TIMER_ALWAYS_RELIABLE) {
+
+ if (lapic_timer_reliable_states != LAPIC_TIMER_ALWAYS_RELIABLE)
on_each_cpu(__setup_broadcast_timer, (void *)false, 1);
- unregister_cpu_notifier(&setup_broadcast_notifier);
- }
+ unregister_cpu_notifier(&cpu_hotplug_notifier);
return;
}
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index 56eecef..2ec93da 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -8,8 +8,7 @@
help
The industrial I/O subsystem provides a unified framework for
drivers for many different types of embedded sensors using a
- number of different physical interfaces (i2c, spi, etc). See
- Documentation/iio for more information.
+ number of different physical interfaces (i2c, spi, etc).
if IIO
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 1ddd886..4f947e4 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -661,7 +661,6 @@
* New channel registration method - relies on the fact a group does
* not need to be initialized if it is name is NULL.
*/
- INIT_LIST_HEAD(&indio_dev->channel_attr_list);
if (indio_dev->channels)
for (i = 0; i < indio_dev->num_channels; i++) {
ret = iio_device_add_channel_sysfs(indio_dev,
@@ -725,12 +724,16 @@
static void iio_dev_release(struct device *device)
{
struct iio_dev *indio_dev = dev_to_iio_dev(device);
- cdev_del(&indio_dev->chrdev);
+ if (indio_dev->chrdev.dev)
+ cdev_del(&indio_dev->chrdev);
if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
iio_device_unregister_trigger_consumer(indio_dev);
iio_device_unregister_eventset(indio_dev);
iio_device_unregister_sysfs(indio_dev);
iio_device_unregister_debugfs(indio_dev);
+
+ ida_simple_remove(&iio_ida, indio_dev->id);
+ kfree(indio_dev);
}
static struct device_type iio_dev_type = {
@@ -761,6 +764,7 @@
dev_set_drvdata(&dev->dev, (void *)dev);
mutex_init(&dev->mlock);
mutex_init(&dev->info_exist_lock);
+ INIT_LIST_HEAD(&dev->channel_attr_list);
dev->id = ida_simple_get(&iio_ida, 0, 0, GFP_KERNEL);
if (dev->id < 0) {
@@ -778,10 +782,8 @@
void iio_device_free(struct iio_dev *dev)
{
- if (dev) {
- ida_simple_remove(&iio_ida, dev->id);
- kfree(dev);
- }
+ if (dev)
+ put_device(&dev->dev);
}
EXPORT_SYMBOL(iio_device_free);
@@ -902,7 +904,7 @@
mutex_lock(&indio_dev->info_exist_lock);
indio_dev->info = NULL;
mutex_unlock(&indio_dev->info_exist_lock);
- device_unregister(&indio_dev->dev);
+ device_del(&indio_dev->dev);
}
EXPORT_SYMBOL(iio_device_unregister);
subsys_initcall(iio_init);
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 55d5642..2e826f9 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -1184,7 +1184,7 @@
static int cma_check_req_qp_type(struct rdma_cm_id *id, struct ib_cm_event *ib_event)
{
- return (((ib_event->event == IB_CM_REQ_RECEIVED) ||
+ return (((ib_event->event == IB_CM_REQ_RECEIVED) &&
(ib_event->param.req_rcvd.qp_type == id->qp_type)) ||
((ib_event->event == IB_CM_SIDR_REQ_RECEIVED) &&
(id->qp_type == IB_QPT_UD)) ||
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma.h b/drivers/infiniband/hw/ocrdma/ocrdma.h
index 037f5ce..48970af 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma.h
+++ b/drivers/infiniband/hw/ocrdma/ocrdma.h
@@ -61,6 +61,7 @@
u32 max_inline_data;
int max_send_sge;
int max_recv_sge;
+ int max_srq_sge;
int max_mr;
u64 max_mr_size;
u32 max_num_mr_pbl;
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
index 9343a15..71942af 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
@@ -990,8 +990,6 @@
struct ocrdma_dev_attr *attr,
struct ocrdma_mbx_query_config *rsp)
{
- int max_q_mem;
-
attr->max_pd =
(rsp->max_pd_ca_ack_delay & OCRDMA_MBX_QUERY_CFG_MAX_PD_MASK) >>
OCRDMA_MBX_QUERY_CFG_MAX_PD_SHIFT;
@@ -1004,6 +1002,9 @@
attr->max_recv_sge = (rsp->max_write_send_sge &
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_MASK) >>
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_SHIFT;
+ attr->max_srq_sge = (rsp->max_srq_rqe_sge &
+ OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_MASK) >>
+ OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_OFFSET;
attr->max_ord_per_qp = (rsp->max_ird_ord_per_qp &
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_MASK) >>
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_SHIFT;
@@ -1037,18 +1038,15 @@
attr->max_inline_data =
attr->wqe_size - (sizeof(struct ocrdma_hdr_wqe) +
sizeof(struct ocrdma_sge));
- max_q_mem = OCRDMA_Q_PAGE_BASE_SIZE << (OCRDMA_MAX_Q_PAGE_SIZE_CNT - 1);
- /* hw can queue one less then the configured size,
- * so publish less by one to stack.
- */
if (dev->nic_info.dev_family == OCRDMA_GEN2_FAMILY) {
- dev->attr.max_wqe = max_q_mem / dev->attr.wqe_size;
attr->ird = 1;
attr->ird_page_size = OCRDMA_MIN_Q_PAGE_SIZE;
attr->num_ird_pages = MAX_OCRDMA_IRD_PAGES;
- } else
- dev->attr.max_wqe = (max_q_mem / dev->attr.wqe_size) - 1;
- dev->attr.max_rqe = (max_q_mem / dev->attr.rqe_size) - 1;
+ }
+ dev->attr.max_wqe = rsp->max_wqes_rqes_per_q >>
+ OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET;
+ dev->attr.max_rqe = rsp->max_wqes_rqes_per_q &
+ OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_MASK;
}
static int ocrdma_check_fw_config(struct ocrdma_dev *dev,
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_main.c b/drivers/infiniband/hw/ocrdma/ocrdma_main.c
index 04fef3d..b050e62 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_main.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_main.c
@@ -97,13 +97,11 @@
sgid->raw[15] = mac_addr[5];
}
-static void ocrdma_add_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
+static bool ocrdma_add_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
bool is_vlan, u16 vlan_id)
{
int i;
- bool found = false;
union ib_gid new_sgid;
- int free_idx = OCRDMA_MAX_SGID;
unsigned long flags;
memset(&ocrdma_zero_sgid, 0, sizeof(union ib_gid));
@@ -115,23 +113,19 @@
if (!memcmp(&dev->sgid_tbl[i], &ocrdma_zero_sgid,
sizeof(union ib_gid))) {
/* found free entry */
- if (!found) {
- free_idx = i;
- found = true;
- break;
- }
+ memcpy(&dev->sgid_tbl[i], &new_sgid,
+ sizeof(union ib_gid));
+ spin_unlock_irqrestore(&dev->sgid_lock, flags);
+ return true;
} else if (!memcmp(&dev->sgid_tbl[i], &new_sgid,
sizeof(union ib_gid))) {
/* entry already present, no addition is required. */
spin_unlock_irqrestore(&dev->sgid_lock, flags);
- return;
+ return false;
}
}
- /* if entry doesn't exist and if table has some space, add entry */
- if (found)
- memcpy(&dev->sgid_tbl[free_idx], &new_sgid,
- sizeof(union ib_gid));
spin_unlock_irqrestore(&dev->sgid_lock, flags);
+ return false;
}
static bool ocrdma_del_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
@@ -167,7 +161,8 @@
ocrdma_get_guid(dev, &sgid->raw[8]);
}
-static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev)
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+static void ocrdma_add_vlan_sgids(struct ocrdma_dev *dev)
{
struct net_device *netdev, *tmp;
u16 vlan_id;
@@ -175,8 +170,6 @@
netdev = dev->nic_info.netdev;
- ocrdma_add_default_sgid(dev);
-
rcu_read_lock();
for_each_netdev_rcu(&init_net, tmp) {
if (netdev == tmp || vlan_dev_real_dev(tmp) == netdev) {
@@ -194,10 +187,23 @@
}
}
rcu_read_unlock();
+}
+#else
+static void ocrdma_add_vlan_sgids(struct ocrdma_dev *dev)
+{
+
+}
+#endif /* VLAN */
+
+static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev)
+{
+ ocrdma_add_default_sgid(dev);
+ ocrdma_add_vlan_sgids(dev);
return 0;
}
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) || \
+defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
static int ocrdma_inet6addr_event(struct notifier_block *notifier,
unsigned long event, void *ptr)
@@ -208,6 +214,7 @@
struct ib_event gid_event;
struct ocrdma_dev *dev;
bool found = false;
+ bool updated = false;
bool is_vlan = false;
u16 vid = 0;
@@ -233,23 +240,21 @@
mutex_lock(&dev->dev_lock);
switch (event) {
case NETDEV_UP:
- ocrdma_add_sgid(dev, netdev->dev_addr, is_vlan, vid);
+ updated = ocrdma_add_sgid(dev, netdev->dev_addr, is_vlan, vid);
break;
case NETDEV_DOWN:
- found = ocrdma_del_sgid(dev, netdev->dev_addr, is_vlan, vid);
- if (found) {
- /* found the matching entry, notify
- * the consumers about it
- */
- gid_event.device = &dev->ibdev;
- gid_event.element.port_num = 1;
- gid_event.event = IB_EVENT_GID_CHANGE;
- ib_dispatch_event(&gid_event);
- }
+ updated = ocrdma_del_sgid(dev, netdev->dev_addr, is_vlan, vid);
break;
default:
break;
}
+ if (updated) {
+ /* GID table updated, notify the consumers about it */
+ gid_event.device = &dev->ibdev;
+ gid_event.element.port_num = 1;
+ gid_event.event = IB_EVENT_GID_CHANGE;
+ ib_dispatch_event(&gid_event);
+ }
mutex_unlock(&dev->dev_lock);
return NOTIFY_OK;
}
@@ -258,7 +263,7 @@
.notifier_call = ocrdma_inet6addr_event
};
-#endif /* IPV6 */
+#endif /* IPV6 and VLAN */
static enum rdma_link_layer ocrdma_link_layer(struct ib_device *device,
u8 port_num)
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h
index 7fd80cc..c75cbdf 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h
@@ -418,6 +418,9 @@
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_SHIFT = 0,
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_MASK = 0xFFFF,
+ OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_SHIFT = 16,
+ OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_MASK = 0xFFFF <<
+ OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_SHIFT,
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_SHIFT = 0,
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_MASK = 0xFFFF,
@@ -458,7 +461,7 @@
OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET,
OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_OFFSET = 0,
OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_MASK = 0xFFFF <<
- OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET,
+ OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_OFFSET,
OCRDMA_MBX_QUERY_CFG_MAX_CQ_OFFSET = 16,
OCRDMA_MBX_QUERY_CFG_MAX_CQ_MASK = 0xFFFF <<
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
index d16d172..2e2e7ae 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
@@ -53,7 +53,7 @@
dev = get_ocrdma_dev(ibdev);
memset(sgid, 0, sizeof(*sgid));
- if (index > OCRDMA_MAX_SGID)
+ if (index >= OCRDMA_MAX_SGID)
return -EINVAL;
memcpy(sgid, &dev->sgid_tbl[index], sizeof(*sgid));
@@ -83,8 +83,8 @@
IB_DEVICE_SHUTDOWN_PORT |
IB_DEVICE_SYS_IMAGE_GUID |
IB_DEVICE_LOCAL_DMA_LKEY;
- attr->max_sge = dev->attr.max_send_sge;
- attr->max_sge_rd = dev->attr.max_send_sge;
+ attr->max_sge = min(dev->attr.max_send_sge, dev->attr.max_srq_sge);
+ attr->max_sge_rd = 0;
attr->max_cq = dev->attr.max_cq;
attr->max_cqe = dev->attr.max_cqe;
attr->max_mr = dev->attr.max_mr;
@@ -97,7 +97,7 @@
min(dev->attr.max_ord_per_qp, dev->attr.max_ird_per_qp);
attr->max_qp_init_rd_atom = dev->attr.max_ord_per_qp;
attr->max_srq = (dev->attr.max_qp - 1);
- attr->max_srq_sge = attr->max_sge;
+ attr->max_srq_sge = attr->max_srq_sge;
attr->max_srq_wr = dev->attr.max_rqe;
attr->local_ca_ack_delay = dev->attr.local_ca_ack_delay;
attr->max_fast_reg_page_list_len = 0;
@@ -2301,8 +2301,10 @@
*stop = true;
expand = false;
}
- } else
+ } else {
+ *polled = true;
expand = ocrdma_update_err_rcqe(ibwc, cqe, qp, status);
+ }
return expand;
}
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 5c1bc99..f10221f 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -123,7 +123,7 @@
skb_frag_size_set(frag, size);
skb->data_len += size;
- skb->truesize += size;
+ skb->truesize += PAGE_SIZE;
} else
skb_put(skb, length);
@@ -156,14 +156,18 @@
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct sk_buff *skb;
int buf_size;
+ int tailroom;
u64 *mapping;
- if (ipoib_ud_need_sg(priv->max_ib_mtu))
+ if (ipoib_ud_need_sg(priv->max_ib_mtu)) {
buf_size = IPOIB_UD_HEAD_SIZE;
- else
+ tailroom = 128; /* reserve some tailroom for IP/TCP headers */
+ } else {
buf_size = IPOIB_UD_BUF_SIZE(priv->max_ib_mtu);
+ tailroom = 0;
+ }
- skb = dev_alloc_skb(buf_size + 4);
+ skb = dev_alloc_skb(buf_size + tailroom + 4);
if (unlikely(!skb))
return NULL;
diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c
index 5f6b7f6..7a0ce8d 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -1377,10 +1377,14 @@
break;
case SRPT_STATE_NEED_DATA:
/* DMA_TO_DEVICE (write) - RDMA read error. */
+
+ /* XXX(hch): this is a horrible layering violation.. */
spin_lock_irqsave(&ioctx->cmd.t_state_lock, flags);
ioctx->cmd.transport_state |= CMD_T_LUN_STOP;
+ ioctx->cmd.transport_state &= ~CMD_T_ACTIVE;
spin_unlock_irqrestore(&ioctx->cmd.t_state_lock, flags);
- transport_generic_handle_data(&ioctx->cmd);
+
+ complete(&ioctx->cmd.transport_lun_stop_comp);
break;
case SRPT_STATE_CMD_RSP_SENT:
/*
@@ -1463,9 +1467,10 @@
/**
* srpt_handle_rdma_comp() - Process an IB RDMA completion notification.
*
- * Note: transport_generic_handle_data() is asynchronous so unmapping the
- * data that has been transferred via IB RDMA must be postponed until the
- * check_stop_free() callback.
+ * XXX: what is now target_execute_cmd used to be asynchronous, and unmapping
+ * the data that has been transferred via IB RDMA had to be postponed until the
+ * check_stop_free() callback. None of this is nessecary anymore and needs to
+ * be cleaned up.
*/
static void srpt_handle_rdma_comp(struct srpt_rdma_ch *ch,
struct srpt_send_ioctx *ioctx,
@@ -1477,7 +1482,7 @@
if (opcode == SRPT_RDMA_READ_LAST) {
if (srpt_test_and_set_cmd_state(ioctx, SRPT_STATE_NEED_DATA,
SRPT_STATE_DATA_IN))
- transport_generic_handle_data(&ioctx->cmd);
+ target_execute_cmd(&ioctx->cmd);
else
printk(KERN_ERR "%s[%d]: wrong state = %d\n", __func__,
__LINE__, srpt_get_cmd_state(ioctx));
diff --git a/drivers/input/joystick/as5011.c b/drivers/input/joystick/as5011.c
index 57d19d4..c96653b 100644
--- a/drivers/input/joystick/as5011.c
+++ b/drivers/input/joystick/as5011.c
@@ -282,7 +282,8 @@
error = request_threaded_irq(as5011->button_irq,
NULL, as5011_button_interrupt,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"as5011_button", as5011);
if (error < 0) {
dev_err(&client->dev,
@@ -296,7 +297,7 @@
error = request_threaded_irq(as5011->axis_irq, NULL,
as5011_axis_interrupt,
- plat_data->axis_irqflags,
+ plat_data->axis_irqflags | IRQF_ONESHOT,
"as5011_joystick", as5011);
if (error) {
dev_err(&client->dev,
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index ee16fb6..83811e4 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -142,6 +142,7 @@
{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX },
{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX },
+ { 0x0d2f, 0x0002, "Andamiro Pump It Up pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX },
{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX },
@@ -164,6 +165,7 @@
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1689, 0xfd00, "Razer Onza Tournament Edition", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
};
@@ -238,12 +240,14 @@
XPAD_XBOX360_VENDOR(0x045e), /* Microsoft X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */
XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */
+ { USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */
XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */
XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */
XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */
- XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
+ XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
+ XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */
{ }
};
diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c
index 64a0ca4..0d77f6c 100644
--- a/drivers/input/keyboard/mcs_touchkey.c
+++ b/drivers/input/keyboard/mcs_touchkey.c
@@ -178,7 +178,8 @@
}
error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt,
- IRQF_TRIGGER_FALLING, client->dev.driver->name, data);
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ client->dev.driver->name, data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
goto err_free_mem;
diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c
index caa218a..7613f1c 100644
--- a/drivers/input/keyboard/mpr121_touchkey.c
+++ b/drivers/input/keyboard/mpr121_touchkey.c
@@ -248,7 +248,7 @@
error = request_threaded_irq(client->irq, NULL,
mpr_touchkey_interrupt,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->dev.driver->name, mpr121);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c
index 0b7b2f8..ca68f29 100644
--- a/drivers/input/keyboard/qt1070.c
+++ b/drivers/input/keyboard/qt1070.c
@@ -201,7 +201,8 @@
msleep(QT1070_RESET_TIME);
err = request_threaded_irq(client->irq, NULL, qt1070_interrupt,
- IRQF_TRIGGER_NONE, client->dev.driver->name, data);
+ IRQF_TRIGGER_NONE | IRQF_ONESHOT,
+ client->dev.driver->name, data);
if (err) {
dev_err(&client->dev, "fail to request irq\n");
goto err_free_mem;
diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
index 3afea3f..c355cdd 100644
--- a/drivers/input/keyboard/tca6416-keypad.c
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -278,7 +278,8 @@
error = request_threaded_irq(chip->irqnum, NULL,
tca6416_keys_isr,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
"tca6416-keypad", chip);
if (error) {
dev_dbg(&client->dev,
diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c
index 5f87b28..893869b 100644
--- a/drivers/input/keyboard/tca8418_keypad.c
+++ b/drivers/input/keyboard/tca8418_keypad.c
@@ -360,7 +360,7 @@
client->irq = gpio_to_irq(client->irq);
error = request_threaded_irq(client->irq, NULL, tca8418_irq_handler,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->name, keypad_data);
if (error) {
dev_dbg(&client->dev,
diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
index 4ffe64d..2c1c9ed 100644
--- a/drivers/input/keyboard/tegra-kbc.c
+++ b/drivers/input/keyboard/tegra-kbc.c
@@ -492,7 +492,7 @@
unsigned int debounce_cnt;
u32 val = 0;
- clk_enable(kbc->clk);
+ clk_prepare_enable(kbc->clk);
/* Reset the KBC controller to clear all previous status.*/
tegra_periph_reset_assert(kbc->clk);
@@ -556,7 +556,7 @@
disable_irq(kbc->irq);
del_timer_sync(&kbc->timer);
- clk_disable(kbc->clk);
+ clk_disable_unprepare(kbc->clk);
}
static int tegra_kbc_open(struct input_dev *dev)
diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c
index a4a445f..4c34f21 100644
--- a/drivers/input/keyboard/tnetv107x-keypad.c
+++ b/drivers/input/keyboard/tnetv107x-keypad.c
@@ -227,15 +227,15 @@
goto error_clk;
}
- error = request_threaded_irq(kp->irq_press, NULL, keypad_irq, 0,
- dev_name(dev), kp);
+ error = request_threaded_irq(kp->irq_press, NULL, keypad_irq,
+ IRQF_ONESHOT, dev_name(dev), kp);
if (error < 0) {
dev_err(kp->dev, "Could not allocate keypad press key irq\n");
goto error_irq_press;
}
- error = request_threaded_irq(kp->irq_release, NULL, keypad_irq, 0,
- dev_name(dev), kp);
+ error = request_threaded_irq(kp->irq_release, NULL, keypad_irq,
+ IRQF_ONESHOT, dev_name(dev), kp);
if (error < 0) {
dev_err(kp->dev, "Could not allocate keypad release key irq\n");
goto error_irq_release;
diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c
index 0ac75bb..2e5d5e1 100644
--- a/drivers/input/misc/ad714x.c
+++ b/drivers/input/misc/ad714x.c
@@ -972,6 +972,7 @@
struct ad714x_platform_data *plat_data = dev->platform_data;
struct ad714x_chip *ad714x;
void *drv_mem;
+ unsigned long irqflags;
struct ad714x_button_drv *bt_drv;
struct ad714x_slider_drv *sd_drv;
@@ -1162,10 +1163,11 @@
alloc_idx++;
}
+ irqflags = plat_data->irqflags ?: IRQF_TRIGGER_FALLING;
+ irqflags |= IRQF_ONESHOT;
+
error = request_threaded_irq(ad714x->irq, NULL, ad714x_interrupt_thread,
- plat_data->irqflags ?
- plat_data->irqflags : IRQF_TRIGGER_FALLING,
- "ad714x_captouch", ad714x);
+ irqflags, "ad714x_captouch", ad714x);
if (error) {
dev_err(dev, "can't allocate irq %d\n", ad714x->irq);
goto err_unreg_dev;
diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c
index 35083c6..c1313d8 100644
--- a/drivers/input/misc/dm355evm_keys.c
+++ b/drivers/input/misc/dm355evm_keys.c
@@ -213,7 +213,8 @@
/* REVISIT: flush the event queue? */
status = request_threaded_irq(keys->irq, NULL, dm355evm_keys_irq,
- IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), keys);
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ dev_name(&pdev->dev), keys);
if (status < 0)
goto fail2;
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 2cf681d..d528c23 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -79,6 +79,10 @@
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254
+/* MacbookPro10,1 (unibody, June 2012) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264
#define BCM5974_DEVICE(prod) { \
.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
@@ -128,6 +132,10 @@
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS),
+ /* MacbookPro10,1 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
/* Terminating entry */
{}
};
@@ -354,6 +362,18 @@
{ DIM_X, DIM_X / SN_COORD, -4620, 5140 },
{ DIM_Y, DIM_Y / SN_COORD, -150, 6600 }
},
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING7_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING7_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4750, 5280 },
+ { DIM_Y, DIM_Y / SN_COORD, -150, 6730 }
+ },
{}
};
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index cad5602..8b31473 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -216,7 +216,7 @@
rep_data[0] = 12;
result = wacom_get_report(intf, WAC_HID_FEATURE_REPORT,
- rep_data[0], &rep_data, 2,
+ rep_data[0], rep_data, 2,
WAC_MSG_RETRIES);
if (result >= 0 && rep_data[1] > 2)
@@ -401,7 +401,9 @@
break;
case HID_USAGE_CONTACTMAX:
- wacom_retrieve_report_data(intf, features);
+ /* leave touch_max as is if predefined */
+ if (!features->touch_max)
+ wacom_retrieve_report_data(intf, features);
i++;
break;
}
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index e2482b4..bd4eb42 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -597,7 +597,7 @@
AD7879_TMR(ts->pen_down_acc_interval);
err = request_threaded_irq(ts->irq, NULL, ad7879_irq,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
dev_name(dev), ts);
if (err) {
dev_err(dev, "irq %d busy?\n", ts->irq);
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 42e6450..25fd056 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1149,7 +1149,8 @@
goto err_free_object;
error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
- pdata->irqflags, client->dev.driver->name, data);
+ pdata->irqflags | IRQF_ONESHOT,
+ client->dev.driver->name, data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
goto err_free_object;
diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
index f2d03c0..5c487d2 100644
--- a/drivers/input/touchscreen/bu21013_ts.c
+++ b/drivers/input/touchscreen/bu21013_ts.c
@@ -509,7 +509,8 @@
input_set_drvdata(in_dev, bu21013_data);
error = request_threaded_irq(pdata->irq, NULL, bu21013_gpio_irq,
- IRQF_TRIGGER_FALLING | IRQF_SHARED,
+ IRQF_TRIGGER_FALLING | IRQF_SHARED |
+ IRQF_ONESHOT,
DRIVER_TP, bu21013_data);
if (error) {
dev_err(&client->dev, "request irq %d failed\n", pdata->irq);
diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c
index 237753a..464f1bf 100644
--- a/drivers/input/touchscreen/cy8ctmg110_ts.c
+++ b/drivers/input/touchscreen/cy8ctmg110_ts.c
@@ -251,7 +251,8 @@
}
err = request_threaded_irq(client->irq, NULL, cy8ctmg110_irq_thread,
- IRQF_TRIGGER_RISING, "touch_reset_key", ts);
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "touch_reset_key", ts);
if (err < 0) {
dev_err(&client->dev,
"irq %d busy? error %d\n", client->irq, err);
diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c
index 3cd7a83..cf29937 100644
--- a/drivers/input/touchscreen/intel-mid-touch.c
+++ b/drivers/input/touchscreen/intel-mid-touch.c
@@ -620,7 +620,7 @@
MRST_PRESSURE_MIN, MRST_PRESSURE_MAX, 0, 0);
err = request_threaded_irq(tsdev->irq, NULL, mrstouch_pendet_irq,
- 0, "mrstouch", tsdev);
+ IRQF_ONESHOT, "mrstouch", tsdev);
if (err) {
dev_err(tsdev->dev, "unable to allocate irq\n");
goto err_free_mem;
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 72f6ba3..953b4c1 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -165,7 +165,7 @@
input_set_drvdata(input, tsdata);
error = request_threaded_irq(client->irq, NULL, pixcir_ts_isr,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->name, tsdata);
if (error) {
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
diff --git a/drivers/input/touchscreen/tnetv107x-ts.c b/drivers/input/touchscreen/tnetv107x-ts.c
index 7e74880..368d2c6c 100644
--- a/drivers/input/touchscreen/tnetv107x-ts.c
+++ b/drivers/input/touchscreen/tnetv107x-ts.c
@@ -297,7 +297,7 @@
goto error_clk;
}
- error = request_threaded_irq(ts->tsc_irq, NULL, tsc_irq, 0,
+ error = request_threaded_irq(ts->tsc_irq, NULL, tsc_irq, IRQF_ONESHOT,
dev_name(dev), ts);
if (error < 0) {
dev_err(ts->dev, "Could not allocate ts irq\n");
diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c
index b6adeae..5ce3fa8 100644
--- a/drivers/input/touchscreen/tsc2005.c
+++ b/drivers/input/touchscreen/tsc2005.c
@@ -650,7 +650,8 @@
tsc2005_stop_scan(ts);
error = request_threaded_irq(spi->irq, NULL, tsc2005_irq_thread,
- IRQF_TRIGGER_RISING, "tsc2005", ts);
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "tsc2005", ts);
if (error) {
dev_err(&spi->dev, "Failed to request irq, err: %d\n", error);
goto err_free_mem;
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index a2e418c..6256263 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -83,6 +83,8 @@
static ATOMIC_NOTIFIER_HEAD(ppr_notifier);
int amd_iommu_max_glx_val = -1;
+static struct dma_map_ops amd_iommu_dma_ops;
+
/*
* general struct to manage commands send to an IOMMU
*/
@@ -402,7 +404,7 @@
return;
de_fflush = debugfs_create_bool("fullflush", 0444, stats_dir,
- (u32 *)&amd_iommu_unmap_flush);
+ &amd_iommu_unmap_flush);
amd_iommu_stats_add(&compl_wait);
amd_iommu_stats_add(&cnt_map_single);
@@ -2267,6 +2269,13 @@
list_add_tail(&dma_domain->list, &iommu_pd_list);
spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
+ dev_data = get_dev_data(dev);
+
+ if (!dev_data->passthrough)
+ dev->archdata.dma_ops = &amd_iommu_dma_ops;
+ else
+ dev->archdata.dma_ops = &nommu_dma_ops;
+
break;
case BUS_NOTIFY_DEL_DEVICE:
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index 542024b..a33612f 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -129,7 +129,7 @@
to handle */
LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings
we find in ACPI */
-bool amd_iommu_unmap_flush; /* if true, flush on every unmap */
+u32 amd_iommu_unmap_flush; /* if true, flush on every unmap */
LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the
system */
@@ -1641,6 +1641,8 @@
amd_iommu_init_api();
+ x86_platform.iommu_shutdown = disable_iommus;
+
if (iommu_pass_through)
goto out;
@@ -1649,8 +1651,6 @@
else
printk(KERN_INFO "AMD-Vi: Lazy IO/TLB flushing enabled\n");
- x86_platform.iommu_shutdown = disable_iommus;
-
out:
return ret;
diff --git a/drivers/iommu/amd_iommu_types.h b/drivers/iommu/amd_iommu_types.h
index 2435555..c1b1d48 100644
--- a/drivers/iommu/amd_iommu_types.h
+++ b/drivers/iommu/amd_iommu_types.h
@@ -652,7 +652,7 @@
* If true, the addresses will be flushed on unmap time, not when
* they are reused
*/
-extern bool amd_iommu_unmap_flush;
+extern u32 amd_iommu_unmap_flush;
/* Smallest number of PASIDs supported by any IOMMU in the system */
extern u32 amd_iommu_max_pasids;
diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
index 3a74e44..86e2f4a 100644
--- a/drivers/iommu/dmar.c
+++ b/drivers/iommu/dmar.c
@@ -26,6 +26,8 @@
* These routines are used by both DMA-remapping and Interrupt-remapping
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt /* has to precede printk.h */
+
#include <linux/pci.h>
#include <linux/dmar.h>
#include <linux/iova.h>
@@ -39,8 +41,6 @@
#include <asm/irq_remapping.h>
#include <asm/iommu_table.h>
-#define PREFIX "DMAR: "
-
/* No locks are needed as DMA remapping hardware unit
* list is constructed at boot time and hotplug of
* these units are not supported by the architecture.
@@ -83,16 +83,12 @@
* ignore it
*/
if (!bus) {
- printk(KERN_WARNING
- PREFIX "Device scope bus [%d] not found\n",
- scope->bus);
+ pr_warn("Device scope bus [%d] not found\n", scope->bus);
break;
}
pdev = pci_get_slot(bus, PCI_DEVFN(path->dev, path->fn));
if (!pdev) {
- printk(KERN_WARNING PREFIX
- "Device scope device [%04x:%02x:%02x.%02x] not found\n",
- segment, bus->number, path->dev, path->fn);
+ /* warning will be printed below */
break;
}
path ++;
@@ -100,9 +96,8 @@
bus = pdev->subordinate;
}
if (!pdev) {
- printk(KERN_WARNING PREFIX
- "Device scope device [%04x:%02x:%02x.%02x] not found\n",
- segment, scope->bus, path->dev, path->fn);
+ pr_warn("Device scope device [%04x:%02x:%02x.%02x] not found\n",
+ segment, scope->bus, path->dev, path->fn);
*dev = NULL;
return 0;
}
@@ -110,9 +105,8 @@
pdev->subordinate) || (scope->entry_type == \
ACPI_DMAR_SCOPE_TYPE_BRIDGE && !pdev->subordinate)) {
pci_dev_put(pdev);
- printk(KERN_WARNING PREFIX
- "Device scope type does not match for %s\n",
- pci_name(pdev));
+ pr_warn("Device scope type does not match for %s\n",
+ pci_name(pdev));
return -EINVAL;
}
*dev = pdev;
@@ -134,8 +128,7 @@
scope->entry_type == ACPI_DMAR_SCOPE_TYPE_BRIDGE)
(*cnt)++;
else if (scope->entry_type != ACPI_DMAR_SCOPE_TYPE_IOAPIC) {
- printk(KERN_WARNING PREFIX
- "Unsupported device scope\n");
+ pr_warn("Unsupported device scope\n");
}
start += scope->length;
}
@@ -261,25 +254,23 @@
case ACPI_DMAR_TYPE_HARDWARE_UNIT:
drhd = container_of(header, struct acpi_dmar_hardware_unit,
header);
- printk (KERN_INFO PREFIX
- "DRHD base: %#016Lx flags: %#x\n",
+ pr_info("DRHD base: %#016Lx flags: %#x\n",
(unsigned long long)drhd->address, drhd->flags);
break;
case ACPI_DMAR_TYPE_RESERVED_MEMORY:
rmrr = container_of(header, struct acpi_dmar_reserved_memory,
header);
- printk (KERN_INFO PREFIX
- "RMRR base: %#016Lx end: %#016Lx\n",
+ pr_info("RMRR base: %#016Lx end: %#016Lx\n",
(unsigned long long)rmrr->base_address,
(unsigned long long)rmrr->end_address);
break;
case ACPI_DMAR_TYPE_ATSR:
atsr = container_of(header, struct acpi_dmar_atsr, header);
- printk(KERN_INFO PREFIX "ATSR flags: %#x\n", atsr->flags);
+ pr_info("ATSR flags: %#x\n", atsr->flags);
break;
case ACPI_DMAR_HARDWARE_AFFINITY:
rhsa = container_of(header, struct acpi_dmar_rhsa, header);
- printk(KERN_INFO PREFIX "RHSA base: %#016Lx proximity domain: %#x\n",
+ pr_info("RHSA base: %#016Lx proximity domain: %#x\n",
(unsigned long long)rhsa->base_address,
rhsa->proximity_domain);
break;
@@ -299,7 +290,7 @@
&dmar_tbl_size);
if (ACPI_SUCCESS(status) && !dmar_tbl) {
- printk (KERN_WARNING PREFIX "Unable to map DMAR\n");
+ pr_warn("Unable to map DMAR\n");
status = AE_NOT_FOUND;
}
@@ -333,20 +324,18 @@
return -ENODEV;
if (dmar->width < PAGE_SHIFT - 1) {
- printk(KERN_WARNING PREFIX "Invalid DMAR haw\n");
+ pr_warn("Invalid DMAR haw\n");
return -EINVAL;
}
- printk (KERN_INFO PREFIX "Host address width %d\n",
- dmar->width + 1);
+ pr_info("Host address width %d\n", dmar->width + 1);
entry_header = (struct acpi_dmar_header *)(dmar + 1);
while (((unsigned long)entry_header) <
(((unsigned long)dmar) + dmar_tbl->length)) {
/* Avoid looping forever on bad ACPI tables */
if (entry_header->length == 0) {
- printk(KERN_WARNING PREFIX
- "Invalid 0-length structure\n");
+ pr_warn("Invalid 0-length structure\n");
ret = -EINVAL;
break;
}
@@ -369,8 +358,7 @@
#endif
break;
default:
- printk(KERN_WARNING PREFIX
- "Unknown DMAR structure type %d\n",
+ pr_warn("Unknown DMAR structure type %d\n",
entry_header->type);
ret = 0; /* for forward compatibility */
break;
@@ -469,12 +457,12 @@
ret = parse_dmar_table();
if (ret) {
if (ret != -ENODEV)
- printk(KERN_INFO PREFIX "parse DMAR table failure.\n");
+ pr_info("parse DMAR table failure.\n");
return ret;
}
if (list_empty(&dmar_drhd_units)) {
- printk(KERN_INFO PREFIX "No DMAR devices found\n");
+ pr_info("No DMAR devices found\n");
return -ENODEV;
}
@@ -506,8 +494,7 @@
(((unsigned long)dmar) + dmar_tbl->length)) {
/* Avoid looping forever on bad ACPI tables */
if (entry_header->length == 0) {
- printk(KERN_WARNING PREFIX
- "Invalid 0-length structure\n");
+ pr_warn("Invalid 0-length structure\n");
return 0;
}
@@ -558,8 +545,7 @@
if (ret && irq_remapping_enabled && cpu_has_x2apic &&
dmar->flags & 0x1)
- printk(KERN_INFO
- "Queued invalidation will be enabled to support x2apic and Intr-remapping.\n");
+ pr_info("Queued invalidation will be enabled to support x2apic and Intr-remapping.\n");
if (ret && !no_iommu && !iommu_detected && !dmar_disabled) {
iommu_detected = 1;
@@ -579,14 +565,89 @@
}
+static void unmap_iommu(struct intel_iommu *iommu)
+{
+ iounmap(iommu->reg);
+ release_mem_region(iommu->reg_phys, iommu->reg_size);
+}
+
+/**
+ * map_iommu: map the iommu's registers
+ * @iommu: the iommu to map
+ * @phys_addr: the physical address of the base resgister
+ *
+ * Memory map the iommu's registers. Start w/ a single page, and
+ * possibly expand if that turns out to be insufficent.
+ */
+static int map_iommu(struct intel_iommu *iommu, u64 phys_addr)
+{
+ int map_size, err=0;
+
+ iommu->reg_phys = phys_addr;
+ iommu->reg_size = VTD_PAGE_SIZE;
+
+ if (!request_mem_region(iommu->reg_phys, iommu->reg_size, iommu->name)) {
+ pr_err("IOMMU: can't reserve memory\n");
+ err = -EBUSY;
+ goto out;
+ }
+
+ iommu->reg = ioremap(iommu->reg_phys, iommu->reg_size);
+ if (!iommu->reg) {
+ pr_err("IOMMU: can't map the region\n");
+ err = -ENOMEM;
+ goto release;
+ }
+
+ iommu->cap = dmar_readq(iommu->reg + DMAR_CAP_REG);
+ iommu->ecap = dmar_readq(iommu->reg + DMAR_ECAP_REG);
+
+ if (iommu->cap == (uint64_t)-1 && iommu->ecap == (uint64_t)-1) {
+ err = -EINVAL;
+ warn_invalid_dmar(phys_addr, " returns all ones");
+ goto unmap;
+ }
+
+ /* the registers might be more than one page */
+ map_size = max_t(int, ecap_max_iotlb_offset(iommu->ecap),
+ cap_max_fault_reg_offset(iommu->cap));
+ map_size = VTD_PAGE_ALIGN(map_size);
+ if (map_size > iommu->reg_size) {
+ iounmap(iommu->reg);
+ release_mem_region(iommu->reg_phys, iommu->reg_size);
+ iommu->reg_size = map_size;
+ if (!request_mem_region(iommu->reg_phys, iommu->reg_size,
+ iommu->name)) {
+ pr_err("IOMMU: can't reserve memory\n");
+ err = -EBUSY;
+ goto out;
+ }
+ iommu->reg = ioremap(iommu->reg_phys, iommu->reg_size);
+ if (!iommu->reg) {
+ pr_err("IOMMU: can't map the region\n");
+ err = -ENOMEM;
+ goto release;
+ }
+ }
+ err = 0;
+ goto out;
+
+unmap:
+ iounmap(iommu->reg);
+release:
+ release_mem_region(iommu->reg_phys, iommu->reg_size);
+out:
+ return err;
+}
+
int alloc_iommu(struct dmar_drhd_unit *drhd)
{
struct intel_iommu *iommu;
- int map_size;
u32 ver;
static int iommu_allocated = 0;
int agaw = 0;
int msagaw = 0;
+ int err;
if (!drhd->reg_base_addr) {
warn_invalid_dmar(0, "");
@@ -600,30 +661,22 @@
iommu->seq_id = iommu_allocated++;
sprintf (iommu->name, "dmar%d", iommu->seq_id);
- iommu->reg = ioremap(drhd->reg_base_addr, VTD_PAGE_SIZE);
- if (!iommu->reg) {
- printk(KERN_ERR "IOMMU: can't map the region\n");
+ err = map_iommu(iommu, drhd->reg_base_addr);
+ if (err) {
+ pr_err("IOMMU: failed to map %s\n", iommu->name);
goto error;
}
- iommu->cap = dmar_readq(iommu->reg + DMAR_CAP_REG);
- iommu->ecap = dmar_readq(iommu->reg + DMAR_ECAP_REG);
- if (iommu->cap == (uint64_t)-1 && iommu->ecap == (uint64_t)-1) {
- warn_invalid_dmar(drhd->reg_base_addr, " returns all ones");
- goto err_unmap;
- }
-
+ err = -EINVAL;
agaw = iommu_calculate_agaw(iommu);
if (agaw < 0) {
- printk(KERN_ERR
- "Cannot get a valid agaw for iommu (seq_id = %d)\n",
- iommu->seq_id);
+ pr_err("Cannot get a valid agaw for iommu (seq_id = %d)\n",
+ iommu->seq_id);
goto err_unmap;
}
msagaw = iommu_calculate_max_sagaw(iommu);
if (msagaw < 0) {
- printk(KERN_ERR
- "Cannot get a valid max agaw for iommu (seq_id = %d)\n",
+ pr_err("Cannot get a valid max agaw for iommu (seq_id = %d)\n",
iommu->seq_id);
goto err_unmap;
}
@@ -632,19 +685,6 @@
iommu->node = -1;
- /* the registers might be more than one page */
- map_size = max_t(int, ecap_max_iotlb_offset(iommu->ecap),
- cap_max_fault_reg_offset(iommu->cap));
- map_size = VTD_PAGE_ALIGN(map_size);
- if (map_size > VTD_PAGE_SIZE) {
- iounmap(iommu->reg);
- iommu->reg = ioremap(drhd->reg_base_addr, map_size);
- if (!iommu->reg) {
- printk(KERN_ERR "IOMMU: can't map the region\n");
- goto error;
- }
- }
-
ver = readl(iommu->reg + DMAR_VER_REG);
pr_info("IOMMU %d: reg_base_addr %llx ver %d:%d cap %llx ecap %llx\n",
iommu->seq_id,
@@ -659,10 +699,10 @@
return 0;
err_unmap:
- iounmap(iommu->reg);
+ unmap_iommu(iommu);
error:
kfree(iommu);
- return -1;
+ return err;
}
void free_iommu(struct intel_iommu *iommu)
@@ -673,7 +713,8 @@
free_dmar_iommu(iommu);
if (iommu->reg)
- iounmap(iommu->reg);
+ unmap_iommu(iommu);
+
kfree(iommu);
}
@@ -710,7 +751,7 @@
if (fault & DMA_FSTS_IQE) {
head = readl(iommu->reg + DMAR_IQH_REG);
if ((head >> DMAR_IQ_SHIFT) == index) {
- printk(KERN_ERR "VT-d detected invalid descriptor: "
+ pr_err("VT-d detected invalid descriptor: "
"low=%llx, high=%llx\n",
(unsigned long long)qi->desc[index].low,
(unsigned long long)qi->desc[index].high);
@@ -1129,15 +1170,14 @@
reason = dmar_get_fault_reason(fault_reason, &fault_type);
if (fault_type == INTR_REMAP)
- printk(KERN_ERR "INTR-REMAP: Request device [[%02x:%02x.%d] "
+ pr_err("INTR-REMAP: Request device [[%02x:%02x.%d] "
"fault index %llx\n"
"INTR-REMAP:[fault reason %02d] %s\n",
(source_id >> 8), PCI_SLOT(source_id & 0xFF),
PCI_FUNC(source_id & 0xFF), addr >> 48,
fault_reason, reason);
else
- printk(KERN_ERR
- "DMAR:[%s] Request device [%02x:%02x.%d] "
+ pr_err("DMAR:[%s] Request device [%02x:%02x.%d] "
"fault addr %llx \n"
"DMAR:[fault reason %02d] %s\n",
(type ? "DMA Read" : "DMA Write"),
@@ -1157,8 +1197,7 @@
raw_spin_lock_irqsave(&iommu->register_lock, flag);
fault_status = readl(iommu->reg + DMAR_FSTS_REG);
if (fault_status)
- printk(KERN_ERR "DRHD: handling fault status reg %x\n",
- fault_status);
+ pr_err("DRHD: handling fault status reg %x\n", fault_status);
/* TBD: ignore advanced fault log currently */
if (!(fault_status & DMA_FSTS_PPF))
@@ -1224,7 +1263,7 @@
irq = create_irq();
if (!irq) {
- printk(KERN_ERR "IOMMU: no free vectors\n");
+ pr_err("IOMMU: no free vectors\n");
return -EINVAL;
}
@@ -1241,7 +1280,7 @@
ret = request_irq(irq, dmar_fault, IRQF_NO_THREAD, iommu->name, iommu);
if (ret)
- printk(KERN_ERR "IOMMU: can't request irq\n");
+ pr_err("IOMMU: can't request irq\n");
return ret;
}
@@ -1258,8 +1297,7 @@
ret = dmar_set_interrupt(iommu);
if (ret) {
- printk(KERN_ERR "DRHD %Lx: failed to enable fault, "
- " interrupt, ret %d\n",
+ pr_err("DRHD %Lx: failed to enable fault, interrupt, ret %d\n",
(unsigned long long)drhd->reg_base_addr, ret);
return -1;
}
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index 6d34706..e0b18f3 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -902,7 +902,6 @@
return 0;
}
-#ifdef CONFIG_SMP
/*
* Migrate the IO-APIC irq in the presence of intr-remapping.
*
@@ -924,6 +923,10 @@
struct irq_cfg *cfg = data->chip_data;
unsigned int dest, irq = data->irq;
struct irte irte;
+ int err;
+
+ if (!config_enabled(CONFIG_SMP))
+ return -EINVAL;
if (!cpumask_intersects(mask, cpu_online_mask))
return -EINVAL;
@@ -931,10 +934,16 @@
if (get_irte(irq, &irte))
return -EBUSY;
- if (assign_irq_vector(irq, cfg, mask))
- return -EBUSY;
+ err = assign_irq_vector(irq, cfg, mask);
+ if (err)
+ return err;
- dest = apic->cpu_mask_to_apicid_and(cfg->domain, mask);
+ err = apic->cpu_mask_to_apicid_and(cfg->domain, mask, &dest);
+ if (err) {
+ if (assign_irq_vector(irq, cfg, data->affinity))
+ pr_err("Failed to recover vector for irq %d\n", irq);
+ return err;
+ }
irte.vector = cfg->vector;
irte.dest_id = IRTE_DEST(dest);
@@ -956,7 +965,6 @@
cpumask_copy(data->affinity, mask);
return 0;
}
-#endif
static void intel_compose_msi_msg(struct pci_dev *pdev,
unsigned int irq, unsigned int dest,
@@ -1058,9 +1066,7 @@
.reenable = reenable_irq_remapping,
.enable_faulting = enable_drhd_fault_handling,
.setup_ioapic_entry = intel_setup_ioapic_entry,
-#ifdef CONFIG_SMP
.set_affinity = intel_ioapic_set_affinity,
-#endif
.free_irq = free_irte,
.compose_msi_msg = intel_compose_msi_msg,
.msi_alloc_irq = intel_msi_alloc_irq,
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 40cda8e..1d29b1c 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -111,16 +111,15 @@
vector, attr);
}
-#ifdef CONFIG_SMP
int set_remapped_irq_affinity(struct irq_data *data, const struct cpumask *mask,
bool force)
{
- if (!remap_ops || !remap_ops->set_affinity)
+ if (!config_enabled(CONFIG_SMP) || !remap_ops ||
+ !remap_ops->set_affinity)
return 0;
return remap_ops->set_affinity(data, mask, force);
}
-#endif
void free_remapped_irq(int irq)
{
diff --git a/drivers/iommu/irq_remapping.h b/drivers/iommu/irq_remapping.h
index be9d729..b12974c 100644
--- a/drivers/iommu/irq_remapping.h
+++ b/drivers/iommu/irq_remapping.h
@@ -59,11 +59,9 @@
unsigned int, int,
struct io_apic_irq_attr *);
-#ifdef CONFIG_SMP
/* Set the CPU affinity of a remapped interrupt */
int (*set_affinity)(struct irq_data *data, const struct cpumask *mask,
bool force);
-#endif
/* Free an IRQ */
int (*free_irq)(int);
diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c
index ecd6790..3f3d09d5 100644
--- a/drivers/iommu/tegra-smmu.c
+++ b/drivers/iommu/tegra-smmu.c
@@ -550,13 +550,13 @@
return 0;
as->pte_count = devm_kzalloc(smmu->dev,
- sizeof(as->pte_count[0]) * SMMU_PDIR_COUNT, GFP_KERNEL);
+ sizeof(as->pte_count[0]) * SMMU_PDIR_COUNT, GFP_ATOMIC);
if (!as->pte_count) {
dev_err(smmu->dev,
"failed to allocate smmu_device PTE cunters\n");
return -ENOMEM;
}
- as->pdir_page = alloc_page(GFP_KERNEL | __GFP_DMA);
+ as->pdir_page = alloc_page(GFP_ATOMIC | __GFP_DMA);
if (!as->pdir_page) {
dev_err(smmu->dev,
"failed to allocate smmu_device page directory\n");
diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c
index 1a0ae44..5f21f629 100644
--- a/drivers/isdn/mISDN/stack.c
+++ b/drivers/isdn/mISDN/stack.c
@@ -135,8 +135,8 @@
skb = NULL;
else if (*debug & DEBUG_SEND_ERR)
printk(KERN_DEBUG
- "%s ch%d mgr prim(%x) addr(%x) err %d\n",
- __func__, ch->nr, hh->prim, ch->addr, ret);
+ "%s mgr prim(%x) err %d\n",
+ __func__, hh->prim, ret);
}
out:
mutex_unlock(&st->lmutex);
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 04cb8c8..12b2b55 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -379,7 +379,7 @@
config LEDS_ASIC3
bool "LED support for the HTC ASIC3"
- depends on LEDS_CLASS
+ depends on LEDS_CLASS=y
depends on MFD_ASIC3
default y
help
@@ -390,7 +390,7 @@
config LEDS_RENESAS_TPU
bool "LED support for Renesas TPU"
- depends on LEDS_CLASS && HAVE_CLK && GENERIC_GPIO
+ depends on LEDS_CLASS=y && HAVE_CLK && GENERIC_GPIO
help
This option enables build of the LED TPU platform driver,
suitable to drive any TPU channel on newer Renesas SoCs.
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 8ee92c8..e663e6f 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -29,7 +29,7 @@
led_cdev->brightness = led_cdev->brightness_get(led_cdev);
}
-static ssize_t led_brightness_show(struct device *dev,
+static ssize_t led_brightness_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c
index d686004..d65353d 100644
--- a/drivers/leds/led-core.c
+++ b/drivers/leds/led-core.c
@@ -44,13 +44,6 @@
if (!led_cdev->blink_brightness)
led_cdev->blink_brightness = led_cdev->max_brightness;
- if (led_get_trigger_data(led_cdev) &&
- delay_on == led_cdev->blink_delay_on &&
- delay_off == led_cdev->blink_delay_off)
- return;
-
- led_stop_software_blink(led_cdev);
-
led_cdev->blink_delay_on = delay_on;
led_cdev->blink_delay_off = delay_off;
diff --git a/drivers/leds/ledtrig-heartbeat.c b/drivers/leds/ledtrig-heartbeat.c
index 41dc76d..a019fbb 100644
--- a/drivers/leds/ledtrig-heartbeat.c
+++ b/drivers/leds/ledtrig-heartbeat.c
@@ -21,6 +21,8 @@
#include <linux/reboot.h>
#include "leds.h"
+static int panic_heartbeats;
+
struct heartbeat_trig_data {
unsigned int phase;
unsigned int period;
@@ -34,6 +36,11 @@
unsigned long brightness = LED_OFF;
unsigned long delay = 0;
+ if (unlikely(panic_heartbeats)) {
+ led_set_brightness(led_cdev, LED_OFF);
+ return;
+ }
+
/* acts like an actual heart beat -- ie thump-thump-pause... */
switch (heartbeat_data->phase) {
case 0:
@@ -111,12 +118,19 @@
return NOTIFY_DONE;
}
+static int heartbeat_panic_notifier(struct notifier_block *nb,
+ unsigned long code, void *unused)
+{
+ panic_heartbeats = 1;
+ return NOTIFY_DONE;
+}
+
static struct notifier_block heartbeat_reboot_nb = {
.notifier_call = heartbeat_reboot_notifier,
};
static struct notifier_block heartbeat_panic_nb = {
- .notifier_call = heartbeat_reboot_notifier,
+ .notifier_call = heartbeat_panic_notifier,
};
static int __init heartbeat_trig_init(void)
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index d039de8..b58b7a3 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -1084,6 +1084,7 @@
ti->split_io = dm_rh_get_region_size(ms->rh);
ti->num_flush_requests = 1;
ti->num_discard_requests = 1;
+ ti->discard_zeroes_data_unsupported = 1;
ms->kmirrord_wq = alloc_workqueue("kmirrord",
WQ_NON_REENTRANT | WQ_MEM_RECLAIM, 0);
@@ -1214,7 +1215,7 @@
* We need to dec pending if this was a write.
*/
if (rw == WRITE) {
- if (!(bio->bi_rw & REQ_FLUSH))
+ if (!(bio->bi_rw & (REQ_FLUSH | REQ_DISCARD)))
dm_rh_dec(ms->rh, map_context->ll);
return error;
}
diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c
index 7771ed2..69732e0 100644
--- a/drivers/md/dm-region-hash.c
+++ b/drivers/md/dm-region-hash.c
@@ -404,6 +404,9 @@
return;
}
+ if (bio->bi_rw & REQ_DISCARD)
+ return;
+
/* We must inform the log that the sync count has changed. */
log->type->set_region_sync(log, region, 0);
@@ -524,7 +527,7 @@
struct bio *bio;
for (bio = bios->head; bio; bio = bio->bi_next) {
- if (bio->bi_rw & REQ_FLUSH)
+ if (bio->bi_rw & (REQ_FLUSH | REQ_DISCARD))
continue;
rh_inc(rh, dm_rh_bio_to_region(rh, bio));
}
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index 37fdaf8..68694da 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -1245,7 +1245,10 @@
cell_release_singleton(cell, bio);
cell_release_singleton(cell2, bio);
- remap_and_issue(tc, bio, lookup_result.block);
+ if ((!lookup_result.shared) && pool->pf.discard_passdown)
+ remap_and_issue(tc, bio, lookup_result.block);
+ else
+ bio_endio(bio, 0);
}
break;
@@ -2292,6 +2295,13 @@
if (r)
return r;
+ r = dm_pool_commit_metadata(pool->pmd);
+ if (r) {
+ DMERR("%s: dm_pool_commit_metadata() failed, error = %d",
+ __func__, r);
+ return r;
+ }
+
r = dm_pool_reserve_metadata_snap(pool->pmd);
if (r)
DMWARN("reserve_metadata_snap message failed.");
@@ -2621,6 +2631,7 @@
if (tc->pool->pf.discard_enabled) {
ti->discards_supported = 1;
ti->num_discard_requests = 1;
+ ti->discard_zeroes_data_unsupported = 1;
}
dm_put(pool_md);
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 1c2f904..d5ab449 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2931,6 +2931,7 @@
* can be sane */
return -EBUSY;
rdev->data_offset = offset;
+ rdev->new_data_offset = offset;
return len;
}
@@ -3926,8 +3927,8 @@
return sprintf(page, "%s\n", array_states[st]);
}
-static int do_md_stop(struct mddev * mddev, int ro, int is_open);
-static int md_set_readonly(struct mddev * mddev, int is_open);
+static int do_md_stop(struct mddev * mddev, int ro, struct block_device *bdev);
+static int md_set_readonly(struct mddev * mddev, struct block_device *bdev);
static int do_md_run(struct mddev * mddev);
static int restart_array(struct mddev *mddev);
@@ -3943,14 +3944,14 @@
/* stopping an active array */
if (atomic_read(&mddev->openers) > 0)
return -EBUSY;
- err = do_md_stop(mddev, 0, 0);
+ err = do_md_stop(mddev, 0, NULL);
break;
case inactive:
/* stopping an active array */
if (mddev->pers) {
if (atomic_read(&mddev->openers) > 0)
return -EBUSY;
- err = do_md_stop(mddev, 2, 0);
+ err = do_md_stop(mddev, 2, NULL);
} else
err = 0; /* already inactive */
break;
@@ -3958,7 +3959,7 @@
break; /* not supported yet */
case readonly:
if (mddev->pers)
- err = md_set_readonly(mddev, 0);
+ err = md_set_readonly(mddev, NULL);
else {
mddev->ro = 1;
set_disk_ro(mddev->gendisk, 1);
@@ -3968,7 +3969,7 @@
case read_auto:
if (mddev->pers) {
if (mddev->ro == 0)
- err = md_set_readonly(mddev, 0);
+ err = md_set_readonly(mddev, NULL);
else if (mddev->ro == 1)
err = restart_array(mddev);
if (err == 0) {
@@ -5351,15 +5352,17 @@
}
EXPORT_SYMBOL_GPL(md_stop);
-static int md_set_readonly(struct mddev *mddev, int is_open)
+static int md_set_readonly(struct mddev *mddev, struct block_device *bdev)
{
int err = 0;
mutex_lock(&mddev->open_mutex);
- if (atomic_read(&mddev->openers) > is_open) {
+ if (atomic_read(&mddev->openers) > !!bdev) {
printk("md: %s still in use.\n",mdname(mddev));
err = -EBUSY;
goto out;
}
+ if (bdev)
+ sync_blockdev(bdev);
if (mddev->pers) {
__md_stop_writes(mddev);
@@ -5381,18 +5384,26 @@
* 0 - completely stop and dis-assemble array
* 2 - stop but do not disassemble array
*/
-static int do_md_stop(struct mddev * mddev, int mode, int is_open)
+static int do_md_stop(struct mddev * mddev, int mode,
+ struct block_device *bdev)
{
struct gendisk *disk = mddev->gendisk;
struct md_rdev *rdev;
mutex_lock(&mddev->open_mutex);
- if (atomic_read(&mddev->openers) > is_open ||
+ if (atomic_read(&mddev->openers) > !!bdev ||
mddev->sysfs_active) {
printk("md: %s still in use.\n",mdname(mddev));
mutex_unlock(&mddev->open_mutex);
return -EBUSY;
}
+ if (bdev)
+ /* It is possible IO was issued on some other
+ * open file which was closed before we took ->open_mutex.
+ * As that was not the last close __blkdev_put will not
+ * have called sync_blockdev, so we must.
+ */
+ sync_blockdev(bdev);
if (mddev->pers) {
if (mddev->ro)
@@ -5466,7 +5477,7 @@
err = do_md_run(mddev);
if (err) {
printk(KERN_WARNING "md: do_md_run() returned %d\n", err);
- do_md_stop(mddev, 0, 0);
+ do_md_stop(mddev, 0, NULL);
}
}
@@ -5784,8 +5795,7 @@
super_types[mddev->major_version].
validate_super(mddev, rdev);
if ((info->state & (1<<MD_DISK_SYNC)) &&
- (!test_bit(In_sync, &rdev->flags) ||
- rdev->raid_disk != info->raid_disk)) {
+ rdev->raid_disk != info->raid_disk) {
/* This was a hot-add request, but events doesn't
* match, so reject it.
*/
@@ -6482,11 +6492,11 @@
goto done_unlock;
case STOP_ARRAY:
- err = do_md_stop(mddev, 0, 1);
+ err = do_md_stop(mddev, 0, bdev);
goto done_unlock;
case STOP_ARRAY_RO:
- err = md_set_readonly(mddev, 1);
+ err = md_set_readonly(mddev, bdev);
goto done_unlock;
case BLKROSET:
@@ -6751,7 +6761,7 @@
thread->tsk = kthread_run(md_thread, thread,
"%s_%s",
mdname(thread->mddev),
- name ?: mddev->pers->name);
+ name);
if (IS_ERR(thread->tsk)) {
kfree(thread);
return NULL;
@@ -7298,6 +7308,7 @@
int skipped = 0;
struct md_rdev *rdev;
char *desc;
+ struct blk_plug plug;
/* just incase thread restarts... */
if (test_bit(MD_RECOVERY_DONE, &mddev->recovery))
@@ -7447,6 +7458,7 @@
}
mddev->curr_resync_completed = j;
+ blk_start_plug(&plug);
while (j < max_sectors) {
sector_t sectors;
@@ -7552,6 +7564,7 @@
* this also signals 'finished resyncing' to md_stop
*/
out:
+ blk_finish_plug(&plug);
wait_event(mddev->recovery_wait, !atomic_read(&mddev->recovery_active));
/* tell personality that we are finished */
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 9339e67..61a1833 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -474,7 +474,8 @@
}
{
- mddev->thread = md_register_thread(multipathd, mddev, NULL);
+ mddev->thread = md_register_thread(multipathd, mddev,
+ "multipath");
if (!mddev->thread) {
printk(KERN_ERR "multipath: couldn't allocate thread"
" for %s\n", mdname(mddev));
diff --git a/drivers/md/persistent-data/dm-space-map-checker.c b/drivers/md/persistent-data/dm-space-map-checker.c
index 50ed53b..fc90c11 100644
--- a/drivers/md/persistent-data/dm-space-map-checker.c
+++ b/drivers/md/persistent-data/dm-space-map-checker.c
@@ -8,6 +8,7 @@
#include <linux/device-mapper.h>
#include <linux/export.h>
+#include <linux/vmalloc.h>
#ifdef CONFIG_DM_DEBUG_SPACE_MAPS
@@ -89,13 +90,23 @@
ca->nr = nr_blocks;
ca->nr_free = nr_blocks;
- ca->counts = kzalloc(sizeof(*ca->counts) * nr_blocks, GFP_KERNEL);
- if (!ca->counts)
- return -ENOMEM;
+
+ if (!nr_blocks)
+ ca->counts = NULL;
+ else {
+ ca->counts = vzalloc(sizeof(*ca->counts) * nr_blocks);
+ if (!ca->counts)
+ return -ENOMEM;
+ }
return 0;
}
+static void ca_destroy(struct count_array *ca)
+{
+ vfree(ca->counts);
+}
+
static int ca_load(struct count_array *ca, struct dm_space_map *sm)
{
int r;
@@ -126,12 +137,14 @@
static int ca_extend(struct count_array *ca, dm_block_t extra_blocks)
{
dm_block_t nr_blocks = ca->nr + extra_blocks;
- uint32_t *counts = kzalloc(sizeof(*counts) * nr_blocks, GFP_KERNEL);
+ uint32_t *counts = vzalloc(sizeof(*counts) * nr_blocks);
if (!counts)
return -ENOMEM;
- memcpy(counts, ca->counts, sizeof(*counts) * ca->nr);
- kfree(ca->counts);
+ if (ca->counts) {
+ memcpy(counts, ca->counts, sizeof(*counts) * ca->nr);
+ ca_destroy(ca);
+ }
ca->nr = nr_blocks;
ca->nr_free += extra_blocks;
ca->counts = counts;
@@ -151,11 +164,6 @@
return 0;
}
-static void ca_destroy(struct count_array *ca)
-{
- kfree(ca->counts);
-}
-
/*----------------------------------------------------------------*/
struct sm_checker {
@@ -343,25 +351,25 @@
int r;
struct sm_checker *smc;
- if (!sm)
- return NULL;
+ if (IS_ERR_OR_NULL(sm))
+ return ERR_PTR(-EINVAL);
smc = kmalloc(sizeof(*smc), GFP_KERNEL);
if (!smc)
- return NULL;
+ return ERR_PTR(-ENOMEM);
memcpy(&smc->sm, &ops_, sizeof(smc->sm));
r = ca_create(&smc->old_counts, sm);
if (r) {
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
r = ca_create(&smc->counts, sm);
if (r) {
ca_destroy(&smc->old_counts);
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
smc->real_sm = sm;
@@ -371,7 +379,7 @@
ca_destroy(&smc->counts);
ca_destroy(&smc->old_counts);
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
r = ca_commit(&smc->old_counts, &smc->counts);
@@ -379,7 +387,7 @@
ca_destroy(&smc->counts);
ca_destroy(&smc->old_counts);
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
return &smc->sm;
@@ -391,25 +399,25 @@
int r;
struct sm_checker *smc;
- if (!sm)
- return NULL;
+ if (IS_ERR_OR_NULL(sm))
+ return ERR_PTR(-EINVAL);
smc = kmalloc(sizeof(*smc), GFP_KERNEL);
if (!smc)
- return NULL;
+ return ERR_PTR(-ENOMEM);
memcpy(&smc->sm, &ops_, sizeof(smc->sm));
r = ca_create(&smc->old_counts, sm);
if (r) {
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
r = ca_create(&smc->counts, sm);
if (r) {
ca_destroy(&smc->old_counts);
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
smc->real_sm = sm;
diff --git a/drivers/md/persistent-data/dm-space-map-disk.c b/drivers/md/persistent-data/dm-space-map-disk.c
index fc469ba..3d0ed53 100644
--- a/drivers/md/persistent-data/dm-space-map-disk.c
+++ b/drivers/md/persistent-data/dm-space-map-disk.c
@@ -290,7 +290,16 @@
dm_block_t nr_blocks)
{
struct dm_space_map *sm = dm_sm_disk_create_real(tm, nr_blocks);
- return dm_sm_checker_create_fresh(sm);
+ struct dm_space_map *smc;
+
+ if (IS_ERR_OR_NULL(sm))
+ return sm;
+
+ smc = dm_sm_checker_create_fresh(sm);
+ if (IS_ERR(smc))
+ dm_sm_destroy(sm);
+
+ return smc;
}
EXPORT_SYMBOL_GPL(dm_sm_disk_create);
diff --git a/drivers/md/persistent-data/dm-transaction-manager.c b/drivers/md/persistent-data/dm-transaction-manager.c
index 400fe14..e5604b3 100644
--- a/drivers/md/persistent-data/dm-transaction-manager.c
+++ b/drivers/md/persistent-data/dm-transaction-manager.c
@@ -138,6 +138,9 @@
void dm_tm_destroy(struct dm_transaction_manager *tm)
{
+ if (!tm->is_clone)
+ wipe_shadow_table(tm);
+
kfree(tm);
}
EXPORT_SYMBOL_GPL(dm_tm_destroy);
@@ -344,8 +347,10 @@
}
*sm = dm_sm_checker_create(inner);
- if (!*sm)
+ if (IS_ERR(*sm)) {
+ r = PTR_ERR(*sm);
goto bad2;
+ }
} else {
r = dm_bm_write_lock(dm_tm_get_bm(*tm), sb_location,
@@ -364,8 +369,10 @@
}
*sm = dm_sm_checker_create(inner);
- if (!*sm)
+ if (IS_ERR(*sm)) {
+ r = PTR_ERR(*sm);
goto bad2;
+ }
}
return 0;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index a9c7981..cacd008 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -517,8 +517,8 @@
int bad_sectors;
int disk = start_disk + i;
- if (disk >= conf->raid_disks)
- disk -= conf->raid_disks;
+ if (disk >= conf->raid_disks * 2)
+ disk -= conf->raid_disks * 2;
rdev = rcu_dereference(conf->mirrors[disk].rdev);
if (r1_bio->bios[disk] == IO_BLOCKED
@@ -883,7 +883,6 @@
const unsigned long do_sync = (bio->bi_rw & REQ_SYNC);
const unsigned long do_flush_fua = (bio->bi_rw & (REQ_FLUSH | REQ_FUA));
struct md_rdev *blocked_rdev;
- int plugged;
int first_clone;
int sectors_handled;
int max_sectors;
@@ -1034,7 +1033,6 @@
* the bad blocks. Each set of writes gets it's own r1bio
* with a set of bios attached.
*/
- plugged = mddev_check_plugged(mddev);
disks = conf->raid_disks * 2;
retry_write:
@@ -1191,6 +1189,8 @@
bio_list_add(&conf->pending_bio_list, mbio);
conf->pending_count++;
spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (!mddev_check_plugged(mddev))
+ md_wakeup_thread(mddev->thread);
}
/* Mustn't call r1_bio_write_done before this next test,
* as it could result in the bio being freed.
@@ -1213,9 +1213,6 @@
/* In case raid1d snuck in to freeze_array */
wake_up(&conf->wait_barrier);
-
- if (do_sync || !bitmap || !plugged)
- md_wakeup_thread(mddev->thread);
}
static void status(struct seq_file *seq, struct mddev *mddev)
@@ -1821,8 +1818,14 @@
if (atomic_dec_and_test(&r1_bio->remaining)) {
/* if we're here, all write(s) have completed, so clean up */
- md_done_sync(mddev, r1_bio->sectors, 1);
- put_buf(r1_bio);
+ int s = r1_bio->sectors;
+ if (test_bit(R1BIO_MadeGood, &r1_bio->state) ||
+ test_bit(R1BIO_WriteError, &r1_bio->state))
+ reschedule_retry(r1_bio);
+ else {
+ put_buf(r1_bio);
+ md_done_sync(mddev, s, 1);
+ }
}
}
@@ -2488,9 +2491,10 @@
*/
if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
atomic_set(&r1_bio->remaining, read_targets);
- for (i = 0; i < conf->raid_disks * 2; i++) {
+ for (i = 0; i < conf->raid_disks * 2 && read_targets; i++) {
bio = r1_bio->bios[i];
if (bio->bi_end_io == end_sync_read) {
+ read_targets--;
md_sync_acct(bio->bi_bdev, nr_sectors);
generic_make_request(bio);
}
@@ -2621,7 +2625,7 @@
goto abort;
}
err = -ENOMEM;
- conf->thread = md_register_thread(raid1d, mddev, NULL);
+ conf->thread = md_register_thread(raid1d, mddev, "raid1");
if (!conf->thread) {
printk(KERN_ERR
"md/raid1:%s: couldn't allocate thread\n",
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 99ae606..8da6282 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1039,7 +1039,6 @@
const unsigned long do_fua = (bio->bi_rw & REQ_FUA);
unsigned long flags;
struct md_rdev *blocked_rdev;
- int plugged;
int sectors_handled;
int max_sectors;
int sectors;
@@ -1239,7 +1238,6 @@
* of r10_bios is recored in bio->bi_phys_segments just as with
* the read case.
*/
- plugged = mddev_check_plugged(mddev);
r10_bio->read_slot = -1; /* make sure repl_bio gets freed */
raid10_find_phys(conf, r10_bio);
@@ -1396,6 +1394,8 @@
bio_list_add(&conf->pending_bio_list, mbio);
conf->pending_count++;
spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (!mddev_check_plugged(mddev))
+ md_wakeup_thread(mddev->thread);
if (!r10_bio->devs[i].repl_bio)
continue;
@@ -1423,6 +1423,8 @@
bio_list_add(&conf->pending_bio_list, mbio);
conf->pending_count++;
spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (!mddev_check_plugged(mddev))
+ md_wakeup_thread(mddev->thread);
}
/* Don't remove the bias on 'remaining' (one_write_done) until
@@ -1448,9 +1450,6 @@
/* In case raid10d snuck in to freeze_array */
wake_up(&conf->wait_barrier);
-
- if (do_sync || !mddev->bitmap || !plugged)
- md_wakeup_thread(mddev->thread);
}
static void status(struct seq_file *seq, struct mddev *mddev)
@@ -2310,7 +2309,7 @@
if (r10_sync_page_io(rdev,
r10_bio->devs[sl].addr +
sect,
- s<<9, conf->tmppage, WRITE)
+ s, conf->tmppage, WRITE)
== 0) {
/* Well, this device is dead */
printk(KERN_NOTICE
@@ -2349,7 +2348,7 @@
switch (r10_sync_page_io(rdev,
r10_bio->devs[sl].addr +
sect,
- s<<9, conf->tmppage,
+ s, conf->tmppage,
READ)) {
case 0:
/* Well, this device is dead */
@@ -2512,7 +2511,7 @@
slot = r10_bio->read_slot;
printk_ratelimited(
KERN_ERR
- "md/raid10:%s: %s: redirecting"
+ "md/raid10:%s: %s: redirecting "
"sector %llu to another mirror\n",
mdname(mddev),
bdevname(rdev->bdev, b),
@@ -2661,7 +2660,8 @@
blk_start_plug(&plug);
for (;;) {
- flush_pending_writes(conf);
+ if (atomic_read(&mddev->plug_cnt) == 0)
+ flush_pending_writes(conf);
spin_lock_irqsave(&conf->device_lock, flags);
if (list_empty(head)) {
@@ -2890,6 +2890,12 @@
/* want to reconstruct this device */
rb2 = r10_bio;
sect = raid10_find_virt(conf, sector_nr, i);
+ if (sect >= mddev->resync_max_sectors) {
+ /* last stripe is not complete - don't
+ * try to recover this sector.
+ */
+ continue;
+ }
/* Unless we are doing a full sync, or a replacement
* we only need to recover the block if it is set in
* the bitmap
@@ -3421,7 +3427,7 @@
spin_lock_init(&conf->resync_lock);
init_waitqueue_head(&conf->wait_barrier);
- conf->thread = md_register_thread(raid10d, mddev, NULL);
+ conf->thread = md_register_thread(raid10d, mddev, "raid10");
if (!conf->thread)
goto out;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index d267672..04348d7 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -196,12 +196,14 @@
BUG_ON(!list_empty(&sh->lru));
BUG_ON(atomic_read(&conf->active_stripes)==0);
if (test_bit(STRIPE_HANDLE, &sh->state)) {
- if (test_bit(STRIPE_DELAYED, &sh->state))
+ if (test_bit(STRIPE_DELAYED, &sh->state) &&
+ !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
list_add_tail(&sh->lru, &conf->delayed_list);
else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
sh->bm_seq - conf->seq_write > 0)
list_add_tail(&sh->lru, &conf->bitmap_list);
else {
+ clear_bit(STRIPE_DELAYED, &sh->state);
clear_bit(STRIPE_BIT_DELAY, &sh->state);
list_add_tail(&sh->lru, &conf->handle_list);
}
@@ -606,6 +608,12 @@
* a chance*/
md_check_recovery(conf->mddev);
}
+ /*
+ * Because md_wait_for_blocked_rdev
+ * will dec nr_pending, we must
+ * increment it first.
+ */
+ atomic_inc(&rdev->nr_pending);
md_wait_for_blocked_rdev(rdev, conf->mddev);
} else {
/* Acknowledged bad block - skip the write */
@@ -1737,6 +1745,7 @@
} else {
const char *bdn = bdevname(rdev->bdev, b);
int retry = 0;
+ int set_bad = 0;
clear_bit(R5_UPTODATE, &sh->dev[i].flags);
atomic_inc(&rdev->read_errors);
@@ -1748,7 +1757,8 @@
mdname(conf->mddev),
(unsigned long long)s,
bdn);
- else if (conf->mddev->degraded >= conf->max_degraded)
+ else if (conf->mddev->degraded >= conf->max_degraded) {
+ set_bad = 1;
printk_ratelimited(
KERN_WARNING
"md/raid:%s: read error not correctable "
@@ -1756,8 +1766,9 @@
mdname(conf->mddev),
(unsigned long long)s,
bdn);
- else if (test_bit(R5_ReWrite, &sh->dev[i].flags))
+ } else if (test_bit(R5_ReWrite, &sh->dev[i].flags)) {
/* Oh, no!!! */
+ set_bad = 1;
printk_ratelimited(
KERN_WARNING
"md/raid:%s: read error NOT corrected!! "
@@ -1765,7 +1776,7 @@
mdname(conf->mddev),
(unsigned long long)s,
bdn);
- else if (atomic_read(&rdev->read_errors)
+ } else if (atomic_read(&rdev->read_errors)
> conf->max_nr_stripes)
printk(KERN_WARNING
"md/raid:%s: Too many read errors, failing device %s.\n",
@@ -1777,7 +1788,11 @@
else {
clear_bit(R5_ReadError, &sh->dev[i].flags);
clear_bit(R5_ReWrite, &sh->dev[i].flags);
- md_error(conf->mddev, rdev);
+ if (!(set_bad
+ && test_bit(In_sync, &rdev->flags)
+ && rdev_set_badblocks(
+ rdev, sh->sector, STRIPE_SECTORS, 0)))
+ md_error(conf->mddev, rdev);
}
}
rdev_dec_pending(rdev, conf->mddev);
@@ -3582,8 +3597,18 @@
finish:
/* wait for this device to become unblocked */
- if (conf->mddev->external && unlikely(s.blocked_rdev))
- md_wait_for_blocked_rdev(s.blocked_rdev, conf->mddev);
+ if (unlikely(s.blocked_rdev)) {
+ if (conf->mddev->external)
+ md_wait_for_blocked_rdev(s.blocked_rdev,
+ conf->mddev);
+ else
+ /* Internal metadata will immediately
+ * be written by raid5d, so we don't
+ * need to wait here.
+ */
+ rdev_dec_pending(s.blocked_rdev,
+ conf->mddev);
+ }
if (s.handle_bad_blocks)
for (i = disks; i--; ) {
@@ -3881,8 +3906,6 @@
raid_bio->bi_next = (void*)rdev;
align_bi->bi_bdev = rdev->bdev;
align_bi->bi_flags &= ~(1 << BIO_SEG_VALID);
- /* No reshape active, so we can trust rdev->data_offset */
- align_bi->bi_sector += rdev->data_offset;
if (!bio_fits_rdev(align_bi) ||
is_badblock(rdev, align_bi->bi_sector, align_bi->bi_size>>9,
@@ -3893,6 +3916,9 @@
return 0;
}
+ /* No reshape active, so we can trust rdev->data_offset */
+ align_bi->bi_sector += rdev->data_offset;
+
spin_lock_irq(&conf->device_lock);
wait_event_lock_irq(conf->wait_for_stripe,
conf->quiesce == 0,
@@ -3971,7 +3997,6 @@
struct stripe_head *sh;
const int rw = bio_data_dir(bi);
int remaining;
- int plugged;
if (unlikely(bi->bi_rw & REQ_FLUSH)) {
md_flush_request(mddev, bi);
@@ -3990,7 +4015,6 @@
bi->bi_next = NULL;
bi->bi_phys_segments = 1; /* over-loaded to count active stripes */
- plugged = mddev_check_plugged(mddev);
for (;logical_sector < last_sector; logical_sector += STRIPE_SECTORS) {
DEFINE_WAIT(w);
int previous;
@@ -4092,6 +4116,7 @@
if ((bi->bi_rw & REQ_SYNC) &&
!test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
atomic_inc(&conf->preread_active_stripes);
+ mddev_check_plugged(mddev);
release_stripe(sh);
} else {
/* cannot get stripe for read-ahead, just give-up */
@@ -4099,10 +4124,7 @@
finish_wait(&conf->wait_for_overlap, &w);
break;
}
-
}
- if (!plugged)
- md_wakeup_thread(mddev->thread);
spin_lock_irq(&conf->device_lock);
remaining = raid5_dec_bi_phys_segments(bi);
@@ -4823,6 +4845,7 @@
int raid_disk, memory, max_disks;
struct md_rdev *rdev;
struct disk_info *disk;
+ char pers_name[6];
if (mddev->new_level != 5
&& mddev->new_level != 4
@@ -4946,7 +4969,8 @@
printk(KERN_INFO "md/raid:%s: allocated %dkB\n",
mdname(mddev), memory);
- conf->thread = md_register_thread(raid5d, mddev, NULL);
+ sprintf(pers_name, "raid%d", mddev->new_level);
+ conf->thread = md_register_thread(raid5d, mddev, pers_name);
if (!conf->thread) {
printk(KERN_ERR
"md/raid:%s: couldn't allocate thread.\n",
@@ -5465,10 +5489,9 @@
if (rdev->saved_raid_disk >= 0 &&
rdev->saved_raid_disk >= first &&
conf->disks[rdev->saved_raid_disk].rdev == NULL)
- disk = rdev->saved_raid_disk;
- else
- disk = first;
- for ( ; disk <= last ; disk++) {
+ first = rdev->saved_raid_disk;
+
+ for (disk = first; disk <= last; disk++) {
p = conf->disks + disk;
if (p->rdev == NULL) {
clear_bit(In_sync, &rdev->flags);
@@ -5477,8 +5500,11 @@
if (rdev->saved_raid_disk != disk)
conf->fullsync = 1;
rcu_assign_pointer(p->rdev, rdev);
- break;
+ goto out;
}
+ }
+ for (disk = first; disk <= last; disk++) {
+ p = conf->disks + disk;
if (test_bit(WantReplacement, &p->rdev->flags) &&
p->replacement == NULL) {
clear_bit(In_sync, &rdev->flags);
@@ -5490,6 +5516,7 @@
break;
}
}
+out:
print_raid5_conf(conf);
return err;
}
diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c
index 7d42c11..0cdbd74 100644
--- a/drivers/media/common/saa7146_fops.c
+++ b/drivers/media/common/saa7146_fops.c
@@ -198,7 +198,6 @@
struct saa7146_dev *dev = video_drvdata(file);
struct saa7146_fh *fh = NULL;
int result = 0;
- enum v4l2_buf_type type;
DEB_EE("file:%p, dev:%s\n", file, video_device_node_name(vdev));
@@ -207,10 +206,6 @@
DEB_D("using: %p\n", dev);
- type = vdev->vfl_type == VFL_TYPE_GRABBER
- ? V4L2_BUF_TYPE_VIDEO_CAPTURE
- : V4L2_BUF_TYPE_VBI_CAPTURE;
-
/* check if an extension is registered */
if( NULL == dev->ext ) {
DEB_S("no extension registered for this device\n");
diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
index 00a6732..39eab73 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ b/drivers/media/dvb/dvb-core/dvbdev.c
@@ -243,6 +243,7 @@
if (minor == MAX_DVB_MINORS) {
kfree(dvbdevfops);
kfree(dvbdev);
+ up_write(&minor_rwsem);
mutex_unlock(&dvbdev_register_lock);
return -EINVAL;
}
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index 98ecaf0..3180f5b 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -516,9 +516,9 @@
if(cx24110_readreg(state,0x10)&0x40) {
/* the RS error counter has finished one counting window */
cx24110_writereg(state,0x10,0x60); /* select the byer reg */
- cx24110_readreg(state, 0x12) |
+ (void)(cx24110_readreg(state, 0x12) |
(cx24110_readreg(state, 0x13) << 8) |
- (cx24110_readreg(state, 0x14) << 16);
+ (cx24110_readreg(state, 0x14) << 16));
cx24110_writereg(state,0x10,0x70); /* select the bler reg */
state->lastbler=cx24110_readreg(state,0x12)|
(cx24110_readreg(state,0x13)<<8)|
diff --git a/drivers/media/dvb/frontends/cxd2820r_c.c b/drivers/media/dvb/frontends/cxd2820r_c.c
index 9454049..ed3b0ba6 100644
--- a/drivers/media/dvb/frontends/cxd2820r_c.c
+++ b/drivers/media/dvb/frontends/cxd2820r_c.c
@@ -121,7 +121,7 @@
if (ret)
goto error;
- switch ((buf[0] >> 0) & 0x03) {
+ switch ((buf[0] >> 0) & 0x07) {
case 0:
c->modulation = QAM_16;
break;
diff --git a/drivers/media/dvb/frontends/lg2160.c b/drivers/media/dvb/frontends/lg2160.c
index a3ab1a5..cc11260 100644
--- a/drivers/media/dvb/frontends/lg2160.c
+++ b/drivers/media/dvb/frontends/lg2160.c
@@ -126,7 +126,7 @@
lg_reg("writing %d registers...\n", len);
- for (i = 0; i < len - 1; i++) {
+ for (i = 0; i < len; i++) {
ret = lg216x_write_reg(state, regs[i].reg, regs[i].val);
if (lg_fail(ret))
return ret;
diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c
index 63c004a..664e460 100644
--- a/drivers/media/dvb/siano/smsusb.c
+++ b/drivers/media/dvb/siano/smsusb.c
@@ -544,6 +544,8 @@
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0xc0a0),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
+ { USB_DEVICE(0x2040, 0xf5a0),
+ .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ } /* Terminating entry */
};
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
index 740a3d5..b415211 100644
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -157,7 +157,7 @@
goto err_out_free_region;
dev->io = pci_resource_start(pdev, 0);
- if (snd_tea575x_init(&dev->tea)) {
+ if (snd_tea575x_init(&dev->tea, THIS_MODULE)) {
printk(KERN_ERR "radio-maxiradio: Unable to detect TEA575x tuner\n");
goto err_out_free_region;
}
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
index 52b8011..4efcbec 100644
--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -238,7 +238,7 @@
snprintf(fmr2->tea.bus_info, sizeof(fmr2->tea.bus_info), "%s:%s",
fmr2->is_fmd2 ? "PnP" : "ISA", dev_name(pdev));
- if (snd_tea575x_init(&fmr2->tea)) {
+ if (snd_tea575x_init(&fmr2->tea, THIS_MODULE)) {
printk(KERN_ERR "radio-sf16fmr2: Unable to detect TEA575x tuner\n");
release_region(fmr2->io, 2);
return -ENODEV;
diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c
index e9f6387..f412f7a 100644
--- a/drivers/media/radio/si470x/radio-si470x-usb.c
+++ b/drivers/media/radio/si470x/radio-si470x-usb.c
@@ -51,6 +51,8 @@
{ USB_DEVICE_AND_INTERFACE_INFO(0x1b80, 0xd700, USB_CLASS_HID, 0, 0) },
/* Sanei Electric, Inc. FM USB Radio (sold as DealExtreme.com PCear) */
{ USB_DEVICE_AND_INTERFACE_INFO(0x10c5, 0x819a, USB_CLASS_HID, 0, 0) },
+ /* Axentia ALERT FM USB Receiver */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x12cf, 0x7111, USB_CLASS_HID, 0, 0) },
/* Terminating entry */
{ }
};
diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
index 342c2c8..54ee348 100644
--- a/drivers/media/rc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -232,7 +232,7 @@
static bool txandrx; /* default = 0 */
module_param(txandrx, bool, 0444);
-MODULE_PARM_DESC(invert, "Allow simultaneous TX and RX");
+MODULE_PARM_DESC(txandrx, "Allow simultaneous TX and RX");
static unsigned int wake_sc = 0x800F040C;
module_param(wake_sc, uint, 0644);
@@ -1032,6 +1032,8 @@
data->dev->tx_ir = wbcir_tx;
data->dev->priv = data;
data->dev->dev.parent = &device->dev;
+ data->dev->timeout = MS_TO_NS(100);
+ data->dev->allowed_protos = RC_TYPE_ALL;
if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) {
dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index ff2933a..856ab96 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -371,7 +371,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
@@ -384,7 +383,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
@@ -398,7 +396,6 @@
.gpiomux = { 4, 0, 2, 3 },
.gpiomute = 1,
.no_msp34xx = 1,
- .needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
@@ -414,7 +411,6 @@
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
@@ -427,7 +423,6 @@
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0, 1, 0, 1 },
.gpiomute = 3,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
@@ -440,7 +435,6 @@
.gpiomask = 0x0f,
.gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
/* 0x04 for some cards ?? */
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= avermedia_tvphone_audio,
@@ -454,7 +448,6 @@
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
@@ -469,7 +462,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0xc00, 0x800, 0x400 },
.gpiomute = 0xc00,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
@@ -482,7 +474,6 @@
.gpiomask = 3,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 1, 2, 3 },
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
@@ -496,7 +487,6 @@
.muxsel = MUXSEL(2, 0, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
@@ -510,7 +500,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20001,0x10001, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
@@ -524,7 +513,6 @@
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 14, 11, 7 },
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
@@ -536,7 +524,6 @@
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 14, 11, 7 },
- .needs_tvaudio = 1,
.msp34xx_alt = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
@@ -553,7 +540,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
.gpiomute = 4,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
@@ -567,7 +553,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 1, 0 },
.gpiomute = 10,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
@@ -583,7 +568,6 @@
/* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
.gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
.gpiomute = 0x002000,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
@@ -597,7 +581,6 @@
.muxsel = MUXSEL(2, 3, 1, 1, 0),
.gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
.gpiomute = 0xcfa007,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.volume_gpio = winview_volume,
@@ -611,7 +594,6 @@
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 0, 0, 0 },
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
@@ -660,7 +642,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 0x800, 0x400 },
.gpiomute = 0xc00,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
@@ -691,7 +672,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = {0x400, 0x400, 0x400, 0x400 },
.gpiomute = 0xc00,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
@@ -706,7 +686,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
.gpiomute = 0x40000,
- .needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= terratv_audio,
@@ -720,7 +699,6 @@
.muxsel = MUXSEL(2, 0, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
@@ -748,7 +726,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
.gpiomute = 0x40000,
- .needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= terratv_audio,
@@ -793,7 +770,6 @@
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel_hook = PXC200_muxsel,
@@ -834,7 +810,6 @@
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
@@ -847,7 +822,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x500, 0, 0x300, 0x900 },
.gpiomute = 0x900,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
@@ -874,7 +848,6 @@
Note: There exists another variant "Winfast 2000" with tv stereo !?
Note: eeprom only contains FF and pci subsystem id 107d:6606
*/
- .needs_tvaudio = 0,
.pll = PLL_28,
.has_radio = 1,
.tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
@@ -934,7 +907,6 @@
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0x551400, 0x551200, 0, 0 },
.gpiomute = 0x551c00,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
@@ -949,7 +921,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0xd0001, 0, 0 },
.gpiomute = 1,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
@@ -966,7 +937,6 @@
.gpiomux = { 4, 0, 2, 3 },
.gpiomute = 1,
.no_msp34xx = 1,
- .needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
@@ -980,7 +950,6 @@
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 4, 11, 7 },
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
@@ -995,7 +964,6 @@
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0, 0},
- .needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
@@ -1066,7 +1034,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
.gpiomute = 0x40000,
- .needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_35,
.tuner_type = TUNER_PHILIPS_PAL_I,
@@ -1084,7 +1051,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = {2,0,0,0 },
.gpiomute = 1,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
@@ -1163,7 +1129,6 @@
MUX2 (mask 0x30000):
0,2,3= from MSP34xx
1= FM stereo Radio from Tuner */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
@@ -1179,7 +1144,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0x10, 8 },
.gpiomute = 4,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
@@ -1218,7 +1182,6 @@
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
@@ -1250,7 +1213,6 @@
.gpiomask = 0,
.muxsel = MUXSEL(3, 1),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_35,
.tuner_type = TUNER_ABSENT,
@@ -1266,7 +1228,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x400, 0x400, 0x400, 0x400 },
.gpiomute = 0x800,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4036FY5_NTSC,
.tuner_addr = ADDR_UNSET,
@@ -1312,7 +1273,6 @@
.muxsel = MUXSEL(2, 2),
.gpiomux = { },
.no_msp34xx = 1,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
@@ -1329,7 +1289,6 @@
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 1, 0, 4, 4 },
.gpiomute = 9,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
@@ -1379,7 +1338,6 @@
.gpiomute = 0x1800,
.audio_mode_gpio= fv2000s_audio,
.no_msp34xx = 1,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
@@ -1393,7 +1351,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x500, 0x500, 0x300, 0x900 },
.gpiomute = 0x900,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
@@ -1477,7 +1434,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
.gpiomute = 13,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_LG_PAL_I_FM,
.tuner_addr = ADDR_UNSET,
@@ -1514,7 +1470,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x01, 0x00, 0x03, 0x03 },
.gpiomute = 0x09,
- .needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
@@ -1540,7 +1495,6 @@
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
@@ -1567,7 +1521,6 @@
.muxsel = MUXSEL(2, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 4,
- .needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
@@ -1597,7 +1550,6 @@
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
@@ -1619,7 +1571,6 @@
* btwincap uses 0x80000/0x80003
*/
.gpiomute = 4,
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
@@ -1655,7 +1606,6 @@
/* .audio_inputs= 1, */
.svhs = 2,
.muxsel = MUXSEL(2, 0, 1, 1),
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
@@ -1875,7 +1825,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 3},
.gpiomute = 4,
- .needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
@@ -1902,7 +1851,6 @@
.gpiomask = 0,
.muxsel = MUXSEL(2, 3),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
@@ -1920,7 +1868,6 @@
/* Tuner, Radio, external, internal, off, on */
.gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
.gpiomute = 0x0f,
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC,
@@ -1936,7 +1883,6 @@
.svhs = 2,
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1, 1),
- .needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
@@ -2034,7 +1980,6 @@
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
@@ -2049,7 +1994,6 @@
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
@@ -2062,7 +2006,6 @@
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
@@ -2079,7 +2022,6 @@
.muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
.muxsel_hook = phytec_muxsel,
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
@@ -2094,7 +2036,6 @@
.muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
.muxsel_hook = phytec_muxsel,
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
@@ -2118,7 +2059,6 @@
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.svhs = NO_SVHS, /* card has no svhs */
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.no_tda7432 = 1,
.gpiomask = 0x00,
@@ -2168,7 +2108,6 @@
.gpiomask = 3,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 1, 1, 1 },
- .needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_35,
@@ -2210,7 +2149,6 @@
.muxsel = MUXSEL(2, 3, 1, 0),
.no_msp34xx = 1,
.no_tda7432 = 1,
- .needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
@@ -2222,7 +2160,6 @@
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.svhs = 2,
- .needs_tvaudio = 0,
.gpiomask = 0x68,
.muxsel = MUXSEL(2, 3, 1),
.gpiomux = { 0x68, 0x68, 0x61, 0x61 },
@@ -2241,7 +2178,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 3,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
@@ -2265,7 +2201,6 @@
.muxsel = MUXSEL(2, 2, 2, 2),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.pll = PLL_28,
- .needs_tvaudio = 0,
.muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
@@ -2358,7 +2293,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
@@ -2405,7 +2339,6 @@
.tuner_addr = ADDR_UNSET,
.gpiomask = 0x008007,
.gpiomux = { 0, 0x000001,0,0 },
- .needs_tvaudio = 1,
.has_radio = 1,
},
[BTTV_BOARD_TIBET_CS16] = {
@@ -2518,7 +2451,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
.gpiomute = 0x002000,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
.tuner_addr = 0xc1 >>1,
@@ -2534,7 +2466,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 3,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TENA_9533_DI,
.tuner_addr = ADDR_UNSET,
@@ -2615,7 +2546,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 1,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
@@ -2714,7 +2644,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20001,0x10001, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
@@ -2746,7 +2675,6 @@
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
.gpiomute = 3, /* CONTVFMi */
- .needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
@@ -2785,7 +2713,6 @@
.gpiomask = 0x00,
.muxsel = MUXSEL(0, 2, 3, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
@@ -2799,7 +2726,6 @@
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
@@ -2813,7 +2739,6 @@
.gpiomask = 0x00,
.muxsel = MUXSEL(3, 2, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
@@ -2877,7 +2802,6 @@
.gpiomask = 0,
.muxsel = MUXSEL(2, 3),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
@@ -3649,7 +3573,7 @@
struct tuner_setup tun_setup;
/* Load tuner module before issuing tuner config call! */
- if (bttv_tvcards[btv->c.type].has_radio)
+ if (btv->has_radio)
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
@@ -3664,7 +3588,7 @@
tun_setup.type = btv->tuner_type;
tun_setup.addr = addr;
- if (bttv_tvcards[btv->c.type].has_radio)
+ if (btv->has_radio)
tun_setup.mode_mask |= T_RADIO;
bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
@@ -3724,6 +3648,10 @@
bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
}
+
+ /* The 61334 needs the msp3410 to do the radio demod to get sound */
+ if (tv.model == 61334)
+ btv->radio_uses_msp_demodulator = 1;
}
static int terratec_active_radio_upgrade(struct bttv *btv)
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index a9cfb0f..ff7a589 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -1218,6 +1218,11 @@
For now this is sufficient. */
switch (input) {
case TVAUDIO_INPUT_RADIO:
+ /* Some boards need the msp do to the radio demod */
+ if (btv->radio_uses_msp_demodulator) {
+ in = MSP_INPUT_DEFAULT;
+ break;
+ }
in = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1,
MSP_DSP_IN_SCART, MSP_DSP_IN_SCART);
break;
diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h
index c517161..acfe2f3 100644
--- a/drivers/media/video/bt8xx/bttv.h
+++ b/drivers/media/video/bt8xx/bttv.h
@@ -236,7 +236,6 @@
/* i2c audio flags */
unsigned int no_msp34xx:1;
unsigned int no_tda7432:1;
- unsigned int needs_tvaudio:1;
unsigned int msp34xx_alt:1;
/* Note: currently no card definition needs to mark the presence
of a RDS saa6588 chip. If this is ever needed, then add a new
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index db943a8d..70fd4f23 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -440,6 +440,7 @@
/* radio data/state */
int has_radio;
int radio_user;
+ int radio_uses_msp_demodulator;
/* miro/pinnacle + Aimslab VHX
philips matchbox (tea5757 radio tuner) support */
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index 2520219..5b75a64 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -607,8 +607,9 @@
}
o = i * pixels_per_line + pixels_read + k;
if (o < len) {
+ u8 ch = invert - buffer[k];
got++;
- put_user((invert - buffer[k]) << shift, buf + o);
+ put_user(ch << shift, buf + o);
}
}
pixels_read += bytes;
@@ -648,8 +649,8 @@
struct qcam *qcam = video_drvdata(file);
strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
- strlcpy(vcap->card, "B&W Quickcam", sizeof(vcap->card));
- strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
+ strlcpy(vcap->card, "Connectix B&W Quickcam", sizeof(vcap->card));
+ strlcpy(vcap->bus_info, qcam->pport->name, sizeof(vcap->bus_info));
vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS;
return 0;
@@ -688,8 +689,8 @@
pix->height = qcam->height / qcam->transfer_scale;
pix->pixelformat = (qcam->bpp == 4) ? V4L2_PIX_FMT_Y4 : V4L2_PIX_FMT_Y6;
pix->field = V4L2_FIELD_NONE;
- pix->bytesperline = qcam->width;
- pix->sizeimage = qcam->width * qcam->height;
+ pix->bytesperline = pix->width;
+ pix->sizeimage = pix->width * pix->height;
/* Just a guess */
pix->colorspace = V4L2_COLORSPACE_SRGB;
return 0;
@@ -757,7 +758,7 @@
"4-Bit Monochrome", V4L2_PIX_FMT_Y4,
{ 0, 0, 0, 0 }
},
- { 0, 0, 0,
+ { 1, 0, 0,
"6-Bit Monochrome", V4L2_PIX_FMT_Y6,
{ 0, 0, 0, 0 }
},
@@ -772,6 +773,25 @@
return 0;
}
+static int qcam_enum_framesizes(struct file *file, void *fh,
+ struct v4l2_frmsizeenum *fsize)
+{
+ static const struct v4l2_frmsize_discrete sizes[] = {
+ { 80, 60 },
+ { 160, 120 },
+ { 320, 240 },
+ };
+
+ if (fsize->index > 2)
+ return -EINVAL;
+ if (fsize->pixel_format != V4L2_PIX_FMT_Y4 &&
+ fsize->pixel_format != V4L2_PIX_FMT_Y6)
+ return -EINVAL;
+ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+ fsize->discrete = sizes[fsize->index];
+ return 0;
+}
+
static ssize_t qcam_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
@@ -795,6 +815,11 @@
return len;
}
+static unsigned int qcam_poll(struct file *filp, poll_table *wait)
+{
+ return v4l2_ctrl_poll(filp, wait) | POLLIN | POLLRDNORM;
+}
+
static int qcam_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct qcam *qcam =
@@ -828,7 +853,7 @@
.owner = THIS_MODULE,
.open = v4l2_fh_open,
.release = v4l2_fh_release,
- .poll = v4l2_ctrl_poll,
+ .poll = qcam_poll,
.unlocked_ioctl = video_ioctl2,
.read = qcam_read,
};
@@ -839,6 +864,7 @@
.vidioc_s_input = qcam_s_input,
.vidioc_enum_input = qcam_enum_input,
.vidioc_enum_fmt_vid_cap = qcam_enum_fmt_vid_cap,
+ .vidioc_enum_framesizes = qcam_enum_framesizes,
.vidioc_g_fmt_vid_cap = qcam_g_fmt_vid_cap,
.vidioc_s_fmt_vid_cap = qcam_s_fmt_vid_cap,
.vidioc_try_fmt_vid_cap = qcam_try_fmt_vid_cap,
@@ -864,9 +890,9 @@
return NULL;
v4l2_dev = &qcam->v4l2_dev;
- strlcpy(v4l2_dev->name, "bw-qcam", sizeof(v4l2_dev->name));
+ snprintf(v4l2_dev->name, sizeof(v4l2_dev->name), "bw-qcam%d", num_cams);
- if (v4l2_device_register(NULL, v4l2_dev) < 0) {
+ if (v4l2_device_register(port->dev, v4l2_dev) < 0) {
v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
kfree(qcam);
return NULL;
@@ -886,7 +912,7 @@
return NULL;
}
qcam->pport = port;
- qcam->pdev = parport_register_device(port, "bw-qcam", NULL, NULL,
+ qcam->pdev = parport_register_device(port, v4l2_dev->name, NULL, NULL,
NULL, 0, NULL);
if (qcam->pdev == NULL) {
v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name);
@@ -975,6 +1001,7 @@
return -ENODEV;
}
qc_calibrate(qcam);
+ v4l2_ctrl_handler_setup(&qcam->hdl);
parport_release(qcam->pdev);
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index b55d57c..7e5ffd6 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -838,10 +838,10 @@
}
CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, "
- "irq: %d, latency: %d, memory: 0x%lx\n",
+ "irq: %d, latency: %d, memory: 0x%llx\n",
cx->pci_dev->device, cx->card_rev, pci_dev->bus->number,
PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn),
- cx->pci_dev->irq, pci_latency, (unsigned long)cx->base_addr);
+ cx->pci_dev->irq, pci_latency, (u64)cx->base_addr);
return 0;
}
@@ -938,7 +938,7 @@
if (retval)
goto err;
- CX18_DEBUG_INFO("base addr: 0x%08x\n", cx->base_addr);
+ CX18_DEBUG_INFO("base addr: 0x%llx\n", (u64)cx->base_addr);
/* PCI Device Setup */
retval = cx18_setup_pci(cx, pci_dev, pci_id);
@@ -946,8 +946,8 @@
goto free_workqueues;
/* map io memory */
- CX18_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
- cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE);
+ CX18_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+ (u64)cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE);
cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET,
CX18_MEM_SIZE);
if (!cx->enc_mem) {
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index 7a37e0e..2767c64 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -622,7 +622,7 @@
unique ID. Starts at 1, so 0 can be used as
uninitialized value in the stream->id. */
- u32 base_addr;
+ resource_size_t base_addr;
u8 card_rev;
void __iomem *enc_mem, *reg_mem;
diff --git a/drivers/media/video/cx18/cx18-firmware.c b/drivers/media/video/cx18/cx18-firmware.c
index 1b3fb50..b85c292a 100644
--- a/drivers/media/video/cx18/cx18-firmware.c
+++ b/drivers/media/video/cx18/cx18-firmware.c
@@ -164,8 +164,13 @@
apu_version = (vers[0] << 24) | (vers[4] << 16) | vers[32];
while (offset + sizeof(seghdr) < fw->size) {
- /* TODO: byteswapping */
- memcpy(&seghdr, src + offset / 4, sizeof(seghdr));
+ const u32 *shptr = src + offset / 4;
+
+ seghdr.sync1 = le32_to_cpu(shptr[0]);
+ seghdr.sync2 = le32_to_cpu(shptr[1]);
+ seghdr.addr = le32_to_cpu(shptr[2]);
+ seghdr.size = le32_to_cpu(shptr[3]);
+
offset += sizeof(seghdr);
if (seghdr.sync1 != APU_ROM_SYNC1 ||
seghdr.sync2 != APU_ROM_SYNC2) {
diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c
index ed81183..eabf00c 100644
--- a/drivers/media/video/cx18/cx18-mailbox.c
+++ b/drivers/media/video/cx18/cx18-mailbox.c
@@ -434,6 +434,7 @@
{
u32 handle, mdl_ack_offset, mdl_ack_count;
struct cx18_mailbox *mb;
+ int i;
mb = &order->mb;
handle = mb->args[0];
@@ -447,8 +448,9 @@
return -1;
}
- cx18_memcpy_fromio(cx, order->mdl_ack, cx->enc_mem + mdl_ack_offset,
- sizeof(struct cx18_mdl_ack) * mdl_ack_count);
+ for (i = 0; i < sizeof(struct cx18_mdl_ack) * mdl_ack_count; i += sizeof(u32))
+ ((u32 *)order->mdl_ack)[i / sizeof(u32)] =
+ cx18_readl(cx, cx->enc_mem + mdl_ack_offset + i);
if ((order->flags & CX18_F_EWO_MB_STALE) == 0)
mb_ack_irq(cx, order);
@@ -538,6 +540,7 @@
struct cx18_mailbox *order_mb;
struct cx18_in_work_order *order;
int submit;
+ int i;
switch (rpu) {
case CPU:
@@ -562,10 +565,12 @@
order_mb = &order->mb;
/* mb->cmd and mb->args[0] through mb->args[2] */
- cx18_memcpy_fromio(cx, &order_mb->cmd, &mb->cmd, 4 * sizeof(u32));
+ for (i = 0; i < 4; i++)
+ (&order_mb->cmd)[i] = cx18_readl(cx, &mb->cmd + i);
+
/* mb->request and mb->ack. N.B. we want to read mb->ack last */
- cx18_memcpy_fromio(cx, &order_mb->request, &mb->request,
- 2 * sizeof(u32));
+ for (i = 0; i < 2; i++)
+ (&order_mb->request)[i] = cx18_readl(cx, &mb->request + i);
if (order_mb->request == order_mb->ack) {
CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our "
diff --git a/drivers/media/video/cx231xx/cx231xx-audio.c b/drivers/media/video/cx231xx/cx231xx-audio.c
index 068f78d..b4c99c7 100644
--- a/drivers/media/video/cx231xx/cx231xx-audio.c
+++ b/drivers/media/video/cx231xx/cx231xx-audio.c
@@ -307,7 +307,7 @@
urb->context = dev;
urb->pipe = usb_rcvisocpipe(dev->udev,
dev->adev.end_point_addr);
- urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+ urb->transfer_flags = URB_ISO_ASAP;
urb->transfer_buffer = dev->adev.transfer_buffer[i];
urb->interval = 1;
urb->complete = cx231xx_audio_isocirq;
@@ -368,7 +368,7 @@
urb->context = dev;
urb->pipe = usb_rcvbulkpipe(dev->udev,
dev->adev.end_point_addr);
- urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+ urb->transfer_flags = 0;
urb->transfer_buffer = dev->adev.transfer_buffer[i];
urb->complete = cx231xx_audio_bulkirq;
urb->transfer_buffer_length = sb_size;
diff --git a/drivers/media/video/cx231xx/cx231xx-vbi.c b/drivers/media/video/cx231xx/cx231xx-vbi.c
index 3d15314..ac7db52 100644
--- a/drivers/media/video/cx231xx/cx231xx-vbi.c
+++ b/drivers/media/video/cx231xx/cx231xx-vbi.c
@@ -448,7 +448,7 @@
return -ENOMEM;
}
dev->vbi_mode.bulk_ctl.urb[i] = urb;
- urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+ urb->transfer_flags = 0;
dev->vbi_mode.bulk_ctl.transfer_buffer[i] =
kzalloc(sb_size, GFP_KERNEL);
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 13739e0..080e111 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -127,22 +127,37 @@
},
[CX23885_BOARD_HAUPPAUGE_HVR1250] = {
.name = "Hauppauge WinTV-HVR1250",
+ .porta = CX23885_ANALOG_VIDEO,
.portc = CX23885_MPEG_DVB,
+#ifdef MT2131_NO_ANALOG_SUPPORT_YET
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .tuner_addr = 0x42, /* 0x84 >> 1 */
+ .tuner_bus = 1,
+#endif
+ .force_bff = 1,
.input = {{
+#ifdef MT2131_NO_ANALOG_SUPPORT_YET
.type = CX23885_VMUX_TELEVISION,
- .vmux = 0,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN5_CH2 |
+ CX25840_VIN2_CH1,
+ .amux = CX25840_AUDIO8,
.gpio0 = 0xff00,
}, {
- .type = CX23885_VMUX_DEBUG,
- .vmux = 0,
- .gpio0 = 0xff01,
- }, {
+#endif
.type = CX23885_VMUX_COMPOSITE1,
- .vmux = 1,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN6_CH1,
+ .amux = CX25840_AUDIO7,
.gpio0 = 0xff02,
}, {
.type = CX23885_VMUX_SVIDEO,
- .vmux = 2,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN8_CH1 |
+ CX25840_SVIDEO_ON,
+ .amux = CX25840_AUDIO7,
.gpio0 = 0xff02,
} },
},
@@ -267,7 +282,55 @@
},
[CX23885_BOARD_HAUPPAUGE_HVR1255] = {
.name = "Hauppauge WinTV-HVR1255",
+ .porta = CX23885_ANALOG_VIDEO,
.portc = CX23885_MPEG_DVB,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = 0x42, /* 0x84 >> 1 */
+ .force_bff = 1,
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN5_CH2 |
+ CX25840_VIN2_CH1 |
+ CX25840_DIF_ON,
+ .amux = CX25840_AUDIO8,
+ }, {
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN6_CH1,
+ .amux = CX25840_AUDIO7,
+ }, {
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN8_CH1 |
+ CX25840_SVIDEO_ON,
+ .amux = CX25840_AUDIO7,
+ } },
+ },
+ [CX23885_BOARD_HAUPPAUGE_HVR1255_22111] = {
+ .name = "Hauppauge WinTV-HVR1255",
+ .porta = CX23885_ANALOG_VIDEO,
+ .portc = CX23885_MPEG_DVB,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = 0x42, /* 0x84 >> 1 */
+ .force_bff = 1,
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN5_CH2 |
+ CX25840_VIN2_CH1 |
+ CX25840_DIF_ON,
+ .amux = CX25840_AUDIO8,
+ }, {
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN8_CH1 |
+ CX25840_SVIDEO_ON,
+ .amux = CX25840_AUDIO7,
+ } },
},
[CX23885_BOARD_HAUPPAUGE_HVR1210] = {
.name = "Hauppauge WinTV-HVR1210",
@@ -624,7 +687,7 @@
}, {
.subvendor = 0x0070,
.subdevice = 0x2259,
- .card = CX23885_BOARD_HAUPPAUGE_HVR1255,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1255_22111,
}, {
.subvendor = 0x0070,
.subdevice = 0x2291,
@@ -900,7 +963,7 @@
struct cx23885_dev *dev = port->dev;
u32 bitmask = 0;
- if (command == XC2028_RESET_CLK)
+ if ((command == XC2028_RESET_CLK) || (command == XC2028_I2C_FLUSH))
return 0;
if (command != 0) {
@@ -1130,6 +1193,7 @@
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
/* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */
/* GPIO-6 I2C Gate which can isolate the demod from the bus */
@@ -1267,6 +1331,7 @@
case CX23885_BOARD_HAUPPAUGE_HVR1400:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
/* FIXME: Implement me */
break;
@@ -1424,6 +1489,7 @@
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
@@ -1511,6 +1577,7 @@
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
@@ -1526,10 +1593,10 @@
*/
switch (dev->board) {
case CX23885_BOARD_TEVII_S470:
- case CX23885_BOARD_HAUPPAUGE_HVR1250:
/* Currently only enabled for the integrated IR controller */
if (!enable_885_ir)
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
case CX23885_BOARD_HAUPPAUGE_HVR1700:
@@ -1539,6 +1606,8 @@
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_MYGICA_X8506:
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index a80a92c..cd54268 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -712,6 +712,7 @@
}
break;
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
i2c_bus = &dev->i2c_bus[0];
fe0->dvb.frontend = dvb_attach(s5h1411_attach,
&hcw_s5h1411_config,
@@ -721,6 +722,11 @@
0x60, &dev->i2c_bus[1].i2c_adap,
&hauppauge_tda18271_config);
}
+
+ tda18271_attach(&dev->ts1.analog_fe,
+ 0x60, &dev->i2c_bus[1].i2c_adap,
+ &hauppauge_tda18271_config);
+
break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
i2c_bus = &dev->i2c_bus[0];
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index c654bdc..22f8e7f 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -505,6 +505,9 @@
if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1800) ||
(dev->board == CX23885_BOARD_MPX885) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1250) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850)) {
/* Configure audio routing */
v4l2_subdev_call(dev->sd_cx25840, audio, s_routing,
@@ -1578,7 +1581,9 @@
fe = vfe->dvb.frontend;
- if (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850)
+ if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111))
fe = &dev->ts1.analog_fe;
if (fe && fe->ops.tuner_ops.set_analog_params) {
@@ -1608,6 +1613,8 @@
int ret;
switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
ret = cx23885_set_freq_via_ops(dev, f);
break;
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index d884784..13c37ec 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -90,6 +90,7 @@
#define CX23885_BOARD_MYGICA_X8507 33
#define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34
#define CX23885_BOARD_TEVII_S471 35
+#define CX23885_BOARD_HAUPPAUGE_HVR1255_22111 36
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
diff --git a/drivers/media/video/cx25821/cx25821-core.c b/drivers/media/video/cx25821/cx25821-core.c
index 83c1aa6..f11f6f0 100644
--- a/drivers/media/video/cx25821/cx25821-core.c
+++ b/drivers/media/video/cx25821/cx25821-core.c
@@ -904,9 +904,6 @@
list_add_tail(&dev->devlist, &cx25821_devlist);
mutex_unlock(&cx25821_devlist_mutex);
- strcpy(cx25821_boards[UNKNOWN_BOARD].name, "unknown");
- strcpy(cx25821_boards[CX25821_BOARD].name, "cx25821");
-
if (dev->pci->device != 0x8210) {
pr_info("%s(): Exiting. Incorrect Hardware device = 0x%02x\n",
__func__, dev->pci->device);
diff --git a/drivers/media/video/cx25821/cx25821.h b/drivers/media/video/cx25821/cx25821.h
index b9aa801..029f293 100644
--- a/drivers/media/video/cx25821/cx25821.h
+++ b/drivers/media/video/cx25821/cx25821.h
@@ -187,7 +187,7 @@
};
struct cx25821_board {
- char *name;
+ const char *name;
enum port porta;
enum port portb;
enum port portc;
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index fc1ff69..d8eac3e 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -84,7 +84,7 @@
/* ----------------------------------------------------------------------- */
-static void cx23885_std_setup(struct i2c_client *client);
+static void cx23888_std_setup(struct i2c_client *client);
int cx25840_write(struct i2c_client *client, u16 addr, u8 value)
{
@@ -638,10 +638,13 @@
finish_wait(&state->fw_wait, &wait);
destroy_workqueue(q);
- /* Call the cx23885 specific std setup func, we no longer rely on
+ /* Call the cx23888 specific std setup func, we no longer rely on
* the generic cx24840 func.
*/
- cx23885_std_setup(client);
+ if (is_cx23888(state))
+ cx23888_std_setup(client);
+ else
+ cx25840_std_setup(client);
/* (re)set input */
set_input(client, state->vid_input, state->aud_input);
@@ -1103,9 +1106,23 @@
cx25840_write4(client, 0x410, 0xffff0dbf);
cx25840_write4(client, 0x414, 0x00137d03);
- cx25840_write4(client, 0x418, 0x01008080);
+
+ /* on the 887, 0x418 is HSCALE_CTRL, on the 888 it is
+ CHROMA_CTRL */
+ if (is_cx23888(state))
+ cx25840_write4(client, 0x418, 0x01008080);
+ else
+ cx25840_write4(client, 0x418, 0x01000000);
+
cx25840_write4(client, 0x41c, 0x00000000);
- cx25840_write4(client, 0x420, 0x001c3e0f);
+
+ /* on the 887, 0x420 is CHROMA_CTRL, on the 888 it is
+ CRUSH_CTRL */
+ if (is_cx23888(state))
+ cx25840_write4(client, 0x420, 0x001c3e0f);
+ else
+ cx25840_write4(client, 0x420, 0x001c8282);
+
cx25840_write4(client, 0x42c, 0x42600000);
cx25840_write4(client, 0x430, 0x0000039b);
cx25840_write4(client, 0x438, 0x00000000);
@@ -1233,7 +1250,7 @@
cx25840_write4(client, 0x8d0, 0x1f063870);
}
- if (is_cx2388x(state)) {
+ if (is_cx23888(state)) {
/* HVR1850 */
/* AUD_IO_CTRL - I2S Input, Parallel1*/
/* - Channel 1 src - Parallel1 (Merlin out) */
@@ -1298,8 +1315,8 @@
}
cx25840_and_or(client, 0x400, ~0xf, fmt);
cx25840_and_or(client, 0x403, ~0x3, pal_m);
- if (is_cx2388x(state))
- cx23885_std_setup(client);
+ if (is_cx23888(state))
+ cx23888_std_setup(client);
else
cx25840_std_setup(client);
if (!is_cx2583x(state))
@@ -1312,6 +1329,7 @@
static int cx25840_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = to_sd(ctrl);
+ struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
switch (ctrl->id) {
@@ -1324,12 +1342,20 @@
break;
case V4L2_CID_SATURATION:
- cx25840_write(client, 0x420, ctrl->val << 1);
- cx25840_write(client, 0x421, ctrl->val << 1);
+ if (is_cx23888(state)) {
+ cx25840_write(client, 0x418, ctrl->val << 1);
+ cx25840_write(client, 0x419, ctrl->val << 1);
+ } else {
+ cx25840_write(client, 0x420, ctrl->val << 1);
+ cx25840_write(client, 0x421, ctrl->val << 1);
+ }
break;
case V4L2_CID_HUE:
- cx25840_write(client, 0x422, ctrl->val);
+ if (is_cx23888(state))
+ cx25840_write(client, 0x41a, ctrl->val);
+ else
+ cx25840_write(client, 0x422, ctrl->val);
break;
default:
@@ -1354,11 +1380,21 @@
fmt->field = V4L2_FIELD_INTERLACED;
fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
- Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4;
- Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4;
+ if (is_cx23888(state)) {
+ Vsrc = (cx25840_read(client, 0x42a) & 0x3f) << 4;
+ Vsrc |= (cx25840_read(client, 0x429) & 0xf0) >> 4;
+ } else {
+ Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4;
+ Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4;
+ }
- Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4;
- Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
+ if (is_cx23888(state)) {
+ Hsrc = (cx25840_read(client, 0x426) & 0x3f) << 4;
+ Hsrc |= (cx25840_read(client, 0x425) & 0xf0) >> 4;
+ } else {
+ Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4;
+ Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
+ }
Vlines = fmt->height + (is_50Hz ? 4 : 7);
@@ -1782,8 +1818,8 @@
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (is_cx2388x(state))
- cx23885_std_setup(client);
+ if (is_cx23888(state))
+ cx23888_std_setup(client);
return set_input(client, input, state->aud_input);
}
@@ -1794,8 +1830,8 @@
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (is_cx2388x(state))
- cx23885_std_setup(client);
+ if (is_cx23888(state))
+ cx23888_std_setup(client);
return set_input(client, state->vid_input, input);
}
@@ -4939,7 +4975,7 @@
}
}
-static void cx23885_std_setup(struct i2c_client *client)
+static void cx23888_std_setup(struct i2c_client *client)
{
struct cx25840_state *state = to_state(i2c_get_clientdata(client));
v4l2_std_id std = state->std;
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index e46446a..ed7b2aa 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -471,7 +471,7 @@
dprintk(1,"Loading firmware ...\n");
dataptr = (u32*)firmware->data;
for (i = 0; i < (firmware->size >> 2); i++) {
- value = *dataptr;
+ value = le32_to_cpu(*dataptr);
checksum += ~value;
memory_write(dev->core, i, value);
dataptr++;
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 20a7e24..862c657 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -974,6 +974,7 @@
[EM2884_BOARD_CINERGY_HTC_STICK] = {
.name = "Terratec Cinergy HTC Stick",
.has_dvb = 1,
+ .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
#if 0
.tuner_type = TUNER_PHILIPS_TDA8290,
.tuner_addr = 0x41,
@@ -2892,7 +2893,7 @@
if (dev->board.has_dvb)
request_module("em28xx-dvb");
- if (dev->board.has_ir_i2c && !disable_ir)
+ if (dev->board.ir_codes && !disable_ir)
request_module("em28xx-rc");
}
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index fce5f76..5e30c4f 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -527,6 +527,8 @@
if (dev->board.ir_codes == NULL) {
/* No remote control support */
+ em28xx_warn("Remote control support is not available for "
+ "this card.\n");
return 0;
}
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 137166d..31721ea 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1653,7 +1653,7 @@
enum v4l2_buf_type buf_type)
{
struct gspca_dev *gspca_dev = video_drvdata(file);
- int ret;
+ int i, ret;
if (buf_type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
@@ -1678,6 +1678,8 @@
wake_up_interruptible(&gspca_dev->wq);
/* empty the transfer queues */
+ for (i = 0; i < gspca_dev->nframes; i++)
+ gspca_dev->frame[i].v4l2_buf.flags &= ~BUF_ALL_FLAGS;
atomic_set(&gspca_dev->fr_q, 0);
atomic_set(&gspca_dev->fr_i, 0);
gspca_dev->fr_o = 0;
diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c
index b5acb1e..80c81dd 100644
--- a/drivers/media/video/gspca/ov534.c
+++ b/drivers/media/video/gspca/ov534.c
@@ -96,7 +96,7 @@
static void setcontrast(struct gspca_dev *gspca_dev);
static void setgain(struct gspca_dev *gspca_dev);
static void setexposure(struct gspca_dev *gspca_dev);
-static int sd_setagc(struct gspca_dev *gspca_dev, __s32 val);
+static void setagc(struct gspca_dev *gspca_dev);
static void setawb(struct gspca_dev *gspca_dev);
static void setaec(struct gspca_dev *gspca_dev);
static void setsharpness(struct gspca_dev *gspca_dev);
@@ -189,7 +189,7 @@
.step = 1,
.default_value = 1,
},
- .set = sd_setagc
+ .set_control = setagc
},
[AWB] = {
{
@@ -851,6 +851,7 @@
int i;
for (i = 0; i < 5; i++) {
+ msleep(10);
data = ov534_reg_read(gspca_dev, OV534_REG_STATUS);
switch (data) {
@@ -1242,10 +1243,6 @@
cam->ctrls = sd->ctrls;
- /* the auto white balance control works only when auto gain is set */
- if (sd_ctrls[AGC].qctrl.default_value == 0)
- gspca_dev->ctrl_inac |= (1 << AWB);
-
cam->cam_mode = ov772x_mode;
cam->nmodes = ARRAY_SIZE(ov772x_mode);
@@ -1486,29 +1483,6 @@
} while (remaining_len > 0);
}
-static int sd_setagc(struct gspca_dev *gspca_dev, __s32 val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- sd->ctrls[AGC].val = val;
-
- /* the auto white balance control works only
- * when auto gain is set */
- if (val) {
- gspca_dev->ctrl_inac &= ~(1 << AWB);
- } else {
- gspca_dev->ctrl_inac |= (1 << AWB);
- if (sd->ctrls[AWB].val) {
- sd->ctrls[AWB].val = 0;
- if (gspca_dev->streaming)
- setawb(gspca_dev);
- }
- }
- if (gspca_dev->streaming)
- setagc(gspca_dev);
- return gspca_dev->usb_err;
-}
-
static int sd_querymenu(struct gspca_dev *gspca_dev,
struct v4l2_querymenu *menu)
{
diff --git a/drivers/media/video/gspca/ov534_9.c b/drivers/media/video/gspca/ov534_9.c
index b579730..1fd41f0 100644
--- a/drivers/media/video/gspca/ov534_9.c
+++ b/drivers/media/video/gspca/ov534_9.c
@@ -1008,6 +1008,7 @@
int i;
for (i = 0; i < 5; i++) {
+ msleep(10);
data = reg_r(gspca_dev, OV534_REG_STATUS);
switch (data) {
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 2cb7d95..115da16 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -418,7 +418,7 @@
struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler;
gspca_dev->vdev.ctrl_handler = hdl;
- v4l2_ctrl_handler_init(hdl, 4);
+ v4l2_ctrl_handler_init(hdl, 5);
sd->contrast = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_CONTRAST, 0, 15, 1, 7);
diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
index ad09820..b9c6f17 100644
--- a/drivers/media/video/gspca/sn9c20x.c
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -1761,7 +1761,6 @@
V4L2_CID_SATURATION, 0, 255, 1, 127);
sd->hue = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_HUE, -180, 180, 1, 0);
- v4l2_ctrl_cluster(4, &sd->brightness);
sd->gamma = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_GAMMA, 0, 255, 1, 0x10);
@@ -1770,7 +1769,6 @@
V4L2_CID_BLUE_BALANCE, 0, 127, 1, 0x28);
sd->red = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_RED_BALANCE, 0, 127, 1, 0x28);
- v4l2_ctrl_cluster(2, &sd->blue);
if (sd->sensor != SENSOR_OV9655 && sd->sensor != SENSOR_SOI968 &&
sd->sensor != SENSOR_OV7670 && sd->sensor != SENSOR_MT9M001 &&
@@ -1779,7 +1777,6 @@
V4L2_CID_HFLIP, 0, 1, 1, 0);
sd->vflip = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_VFLIP, 0, 1, 1, 0);
- v4l2_ctrl_cluster(2, &sd->hflip);
}
if (sd->sensor != SENSOR_SOI968 && sd->sensor != SENSOR_MT9VPRB &&
@@ -1794,6 +1791,20 @@
V4L2_CID_GAIN, 0, 28, 1, 0);
sd->autogain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
+ }
+
+ sd->jpegqual = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
+ V4L2_CID_JPEG_COMPRESSION_QUALITY, 50, 90, 1, 80);
+ if (hdl->error) {
+ pr_err("Could not initialize controls\n");
+ return hdl->error;
+ }
+
+ v4l2_ctrl_cluster(4, &sd->brightness);
+ v4l2_ctrl_cluster(2, &sd->blue);
+ if (sd->hflip)
+ v4l2_ctrl_cluster(2, &sd->hflip);
+ if (sd->autogain) {
if (sd->sensor == SENSOR_SOI968)
/* this sensor doesn't have the exposure control and
autogain is clustered with gain instead. This works
@@ -1803,13 +1814,6 @@
/* Otherwise autogain is clustered with exposure. */
v4l2_ctrl_auto_cluster(2, &sd->autogain, 0, false);
}
-
- sd->jpegqual = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
- V4L2_CID_JPEG_COMPRESSION_QUALITY, 50, 90, 1, 80);
- if (hdl->error) {
- pr_err("Could not initialize controls\n");
- return hdl->error;
- }
return 0;
}
@@ -2066,10 +2070,13 @@
set_gamma(gspca_dev, v4l2_ctrl_g_ctrl(sd->gamma));
set_redblue(gspca_dev, v4l2_ctrl_g_ctrl(sd->blue),
v4l2_ctrl_g_ctrl(sd->red));
- set_gain(gspca_dev, v4l2_ctrl_g_ctrl(sd->gain));
- set_exposure(gspca_dev, v4l2_ctrl_g_ctrl(sd->exposure));
- set_hvflip(gspca_dev, v4l2_ctrl_g_ctrl(sd->hflip),
- v4l2_ctrl_g_ctrl(sd->vflip));
+ if (sd->gain)
+ set_gain(gspca_dev, v4l2_ctrl_g_ctrl(sd->gain));
+ if (sd->exposure)
+ set_exposure(gspca_dev, v4l2_ctrl_g_ctrl(sd->exposure));
+ if (sd->hflip)
+ set_hvflip(gspca_dev, v4l2_ctrl_g_ctrl(sd->hflip),
+ v4l2_ctrl_g_ctrl(sd->vflip));
reg_w1(gspca_dev, 0x1007, 0x20);
reg_w1(gspca_dev, 0x1061, 0x03);
@@ -2172,7 +2179,7 @@
struct sd *sd = (struct sd *) gspca_dev;
int avg_lum;
- if (!v4l2_ctrl_g_ctrl(sd->autogain))
+ if (sd->autogain == NULL || !v4l2_ctrl_g_ctrl(sd->autogain))
return;
avg_lum = atomic_read(&sd->avg_lum);
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 4d1696d..f38faa9 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -3120,7 +3120,7 @@
| (SENSOR_ ## sensor << 8) \
| (flags)
static const struct usb_device_id device_table[] = {
- {USB_DEVICE(0x0458, 0x7025), BS(SN9C120, MI0360)},
+ {USB_DEVICE(0x0458, 0x7025), BSF(SN9C120, MI0360B, F_PDN_INV)},
{USB_DEVICE(0x0458, 0x702e), BS(SN9C120, OV7660)},
{USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, F_PDN_INV)},
{USB_DEVICE(0x045e, 0x00f7), BSF(SN9C105, OV7660, F_PDN_INV)},
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index 057929e..5462ce2 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -866,10 +866,10 @@
pci_write_config_dword(pdev, 0x40, 0xffff);
IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, "
- "irq: %d, latency: %d, memory: 0x%lx\n",
+ "irq: %d, latency: %d, memory: 0x%llx\n",
pdev->device, pdev->revision, pdev->bus->number,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
- pdev->irq, pci_latency, (unsigned long)itv->base_addr);
+ pdev->irq, pci_latency, (u64)itv->base_addr);
return 0;
}
@@ -1007,7 +1007,7 @@
itv->cxhdl.priv = itv;
itv->cxhdl.func = ivtv_api_func;
- IVTV_DEBUG_INFO("base addr: 0x%08x\n", itv->base_addr);
+ IVTV_DEBUG_INFO("base addr: 0x%llx\n", (u64)itv->base_addr);
/* PCI Device Setup */
retval = ivtv_setup_pci(itv, pdev, pci_id);
@@ -1017,8 +1017,8 @@
goto free_mem;
/* map io memory */
- IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
- itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE);
+ IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+ (u64)itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE);
itv->enc_mem = ioremap_nocache(itv->base_addr + IVTV_ENCODER_OFFSET,
IVTV_ENCODER_SIZE);
if (!itv->enc_mem) {
@@ -1034,8 +1034,8 @@
}
if (itv->has_cx23415) {
- IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
- itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
+ IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+ (u64)itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
itv->dec_mem = ioremap_nocache(itv->base_addr + IVTV_DECODER_OFFSET,
IVTV_DECODER_SIZE);
if (!itv->dec_mem) {
@@ -1056,8 +1056,8 @@
}
/* map registers memory */
- IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
- itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
+ IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+ (u64)itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
itv->reg_mem =
ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
if (!itv->reg_mem) {
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index 2e22002..a7e00f8 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -622,7 +622,7 @@
struct v4l2_subdev *sd_video; /* controlling video decoder subdev */
struct v4l2_subdev *sd_audio; /* controlling audio subdev */
struct v4l2_subdev *sd_muxer; /* controlling audio muxer subdev */
- u32 base_addr; /* PCI resource base address */
+ resource_size_t base_addr; /* PCI resource base address */
volatile void __iomem *enc_mem; /* pointer to mapped encoder memory */
volatile void __iomem *dec_mem; /* pointer to mapped decoder memory */
volatile void __iomem *reg_mem; /* pointer to mapped registers */
diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c
index d2dec58..3945556 100644
--- a/drivers/media/video/mem2mem_testdev.c
+++ b/drivers/media/video/mem2mem_testdev.c
@@ -110,22 +110,6 @@
V4L2_M2M_DST = 1,
};
-/* Source and destination queue data */
-static struct m2mtest_q_data q_data[2];
-
-static struct m2mtest_q_data *get_q_data(enum v4l2_buf_type type)
-{
- switch (type) {
- case V4L2_BUF_TYPE_VIDEO_OUTPUT:
- return &q_data[V4L2_M2M_SRC];
- case V4L2_BUF_TYPE_VIDEO_CAPTURE:
- return &q_data[V4L2_M2M_DST];
- default:
- BUG();
- }
- return NULL;
-}
-
#define V4L2_CID_TRANS_TIME_MSEC V4L2_CID_PRIVATE_BASE
#define V4L2_CID_TRANS_NUM_BUFS (V4L2_CID_PRIVATE_BASE + 1)
@@ -198,8 +182,26 @@
int aborting;
struct v4l2_m2m_ctx *m2m_ctx;
+
+ /* Source and destination queue data */
+ struct m2mtest_q_data q_data[2];
};
+static struct m2mtest_q_data *get_q_data(struct m2mtest_ctx *ctx,
+ enum v4l2_buf_type type)
+{
+ switch (type) {
+ case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+ return &ctx->q_data[V4L2_M2M_SRC];
+ case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+ return &ctx->q_data[V4L2_M2M_DST];
+ default:
+ BUG();
+ }
+ return NULL;
+}
+
+
static struct v4l2_queryctrl *get_ctrl(int id)
{
int i;
@@ -223,7 +225,7 @@
int tile_w, bytes_left;
int width, height, bytesperline;
- q_data = get_q_data(V4L2_BUF_TYPE_VIDEO_OUTPUT);
+ q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
width = q_data->width;
height = q_data->height;
@@ -436,7 +438,7 @@
if (!vq)
return -EINVAL;
- q_data = get_q_data(f->type);
+ q_data = get_q_data(ctx, f->type);
f->fmt.pix.width = q_data->width;
f->fmt.pix.height = q_data->height;
@@ -535,7 +537,7 @@
if (!vq)
return -EINVAL;
- q_data = get_q_data(f->type);
+ q_data = get_q_data(ctx, f->type);
if (!q_data)
return -EINVAL;
@@ -747,7 +749,7 @@
struct m2mtest_q_data *q_data;
unsigned int size, count = *nbuffers;
- q_data = get_q_data(vq->type);
+ q_data = get_q_data(ctx, vq->type);
size = q_data->width * q_data->height * q_data->fmt->depth >> 3;
@@ -775,7 +777,7 @@
dprintk(ctx->dev, "type: %d\n", vb->vb2_queue->type);
- q_data = get_q_data(vb->vb2_queue->type);
+ q_data = get_q_data(ctx, vb->vb2_queue->type);
if (vb2_plane_size(vb, 0) < q_data->sizeimage) {
dprintk(ctx->dev, "%s data will not fit into plane (%lu < %lu)\n",
@@ -860,6 +862,9 @@
ctx->transtime = MEM2MEM_DEF_TRANSTIME;
ctx->num_processed = 0;
+ ctx->q_data[V4L2_M2M_SRC].fmt = &formats[0];
+ ctx->q_data[V4L2_M2M_DST].fmt = &formats[0];
+
ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init);
if (IS_ERR(ctx->m2m_ctx)) {
@@ -986,9 +991,6 @@
goto err_m2m;
}
- q_data[V4L2_M2M_SRC].fmt = &formats[0];
- q_data[V4L2_M2M_DST].fmt = &formats[0];
-
return 0;
v4l2_m2m_release(dev->m2m_dev);
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 4296a83..d2e6f82 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -43,6 +43,7 @@
#include <asm/fiq.h>
#include <mach/dma-mx1-mx2.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include <mach/mx1_camera.h>
/*
diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
index ded26b7..637bde8 100644
--- a/drivers/media/video/mx2_camera.c
+++ b/drivers/media/video/mx2_camera.c
@@ -83,6 +83,7 @@
#define CSICR1_INV_DATA (1 << 3)
#define CSICR1_INV_PCLK (1 << 2)
#define CSICR1_REDGE (1 << 1)
+#define CSICR1_FMT_MASK (CSICR1_PACK_DIR | CSICR1_SWAP16_EN)
#define SHIFT_STATFF_LEVEL 22
#define SHIFT_RXFF_LEVEL 19
@@ -230,6 +231,7 @@
u32 src_pixel;
u32 ch1_pixel;
u32 irq_flags;
+ u32 csicr1;
};
/* prp resizing parameters */
@@ -330,6 +332,7 @@
.ch1_pixel = 0x2ca00565, /* RGB565 */
.irq_flags = PRP_INTR_RDERR | PRP_INTR_CH1WERR |
PRP_INTR_CH1FC | PRP_INTR_LBOVF,
+ .csicr1 = 0,
}
},
{
@@ -343,6 +346,7 @@
.irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR |
PRP_INTR_CH2FC | PRP_INTR_LBOVF |
PRP_INTR_CH2OVF,
+ .csicr1 = CSICR1_PACK_DIR,
}
},
{
@@ -356,6 +360,7 @@
.irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR |
PRP_INTR_CH2FC | PRP_INTR_LBOVF |
PRP_INTR_CH2OVF,
+ .csicr1 = CSICR1_SWAP16_EN,
}
},
};
@@ -984,7 +989,6 @@
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct mx2_camera_dev *pcdev = ici->priv;
struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
- const struct soc_camera_format_xlate *xlate;
unsigned long common_flags;
int ret;
int bytesperline;
@@ -1029,24 +1033,7 @@
return ret;
}
- xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
- if (!xlate) {
- dev_warn(icd->parent, "Format %x not found\n", pixfmt);
- return -EINVAL;
- }
-
- if (xlate->code == V4L2_MBUS_FMT_YUYV8_2X8) {
- csicr1 |= CSICR1_PACK_DIR;
- csicr1 &= ~CSICR1_SWAP16_EN;
- dev_dbg(icd->parent, "already yuyv format, don't convert\n");
- } else if (xlate->code == V4L2_MBUS_FMT_UYVY8_2X8) {
- csicr1 &= ~CSICR1_PACK_DIR;
- csicr1 |= CSICR1_SWAP16_EN;
- dev_dbg(icd->parent, "convert uyvy mbus format into yuyv\n");
- } else {
- dev_warn(icd->parent, "mbus format not supported\n");
- return -EINVAL;
- }
+ csicr1 = (csicr1 & ~CSICR1_FMT_MASK) | pcdev->emma_prp->cfg.csicr1;
if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
csicr1 |= CSICR1_REDGE;
@@ -1155,18 +1142,6 @@
}
}
- if (code == V4L2_MBUS_FMT_UYVY8_2X8) {
- formats++;
- if (xlate) {
- xlate->host_fmt =
- soc_mbus_get_fmtdesc(V4L2_MBUS_FMT_YUYV8_2X8);
- xlate->code = code;
- dev_dbg(dev, "Providing host format %s for sensor code %d\n",
- xlate->host_fmt->name, code);
- xlate++;
- }
- }
-
/* Generic pass-trough */
formats++;
if (xlate) {
diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/video/omap3isp/isppreview.c
index 8a4935e..dd91da2 100644
--- a/drivers/media/video/omap3isp/isppreview.c
+++ b/drivers/media/video/omap3isp/isppreview.c
@@ -888,12 +888,12 @@
preview_config_contrast,
NULL,
offsetof(struct prev_params, contrast),
- 0, true,
+ 0, 0, true,
}, /* OMAP3ISP_PREV_BRIGHTNESS */ {
preview_config_brightness,
NULL,
offsetof(struct prev_params, brightness),
- 0, true,
+ 0, 0, true,
},
};
@@ -1102,7 +1102,7 @@
unsigned int elv = prev->crop.top + prev->crop.height - 1;
u32 features;
- if (format->code == V4L2_MBUS_FMT_Y10_1X10) {
+ if (format->code != V4L2_MBUS_FMT_Y10_1X10) {
sph -= 2;
eph += 2;
slv -= 2;
diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c
index af2d908..b4c679b 100644
--- a/drivers/media/video/pms.c
+++ b/drivers/media/video/pms.c
@@ -26,9 +26,11 @@
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/isa.h>
#include <asm/io.h>
diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index 3545745..725812a 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -350,7 +350,8 @@
if (pixm)
sizes[i] = max(size, pixm->plane_fmt[i].sizeimage);
else
- sizes[i] = size;
+ sizes[i] = max_t(u32, size, frame->payload[i]);
+
allocators[i] = ctx->fimc_dev->alloc_ctx;
}
@@ -479,37 +480,39 @@
static int fimc_capture_open(struct file *file)
{
struct fimc_dev *fimc = video_drvdata(file);
- int ret = v4l2_fh_open(file);
-
- if (ret)
- return ret;
+ int ret;
dbg("pid: %d, state: 0x%lx", task_pid_nr(current), fimc->state);
- /* Return if the corresponding video mem2mem node is already opened. */
if (fimc_m2m_active(fimc))
return -EBUSY;
set_bit(ST_CAPT_BUSY, &fimc->state);
- pm_runtime_get_sync(&fimc->pdev->dev);
+ ret = pm_runtime_get_sync(&fimc->pdev->dev);
+ if (ret < 0)
+ return ret;
- if (++fimc->vid_cap.refcnt == 1) {
- ret = fimc_pipeline_initialize(&fimc->pipeline,
- &fimc->vid_cap.vfd->entity, true);
- if (ret < 0) {
- dev_err(&fimc->pdev->dev,
- "Video pipeline initialization failed\n");
- pm_runtime_put_sync(&fimc->pdev->dev);
- fimc->vid_cap.refcnt--;
- v4l2_fh_release(file);
- clear_bit(ST_CAPT_BUSY, &fimc->state);
- return ret;
- }
- ret = fimc_capture_ctrls_create(fimc);
+ ret = v4l2_fh_open(file);
+ if (ret)
+ return ret;
- if (!ret && !fimc->vid_cap.user_subdev_api)
- ret = fimc_capture_set_default_format(fimc);
+ if (++fimc->vid_cap.refcnt != 1)
+ return 0;
+
+ ret = fimc_pipeline_initialize(&fimc->pipeline,
+ &fimc->vid_cap.vfd->entity, true);
+ if (ret < 0) {
+ clear_bit(ST_CAPT_BUSY, &fimc->state);
+ pm_runtime_put_sync(&fimc->pdev->dev);
+ fimc->vid_cap.refcnt--;
+ v4l2_fh_release(file);
+ return ret;
}
+ ret = fimc_capture_ctrls_create(fimc);
+
+ if (!ret && !fimc->vid_cap.user_subdev_api)
+ ret = fimc_capture_set_default_format(fimc);
+
return ret;
}
@@ -818,9 +821,6 @@
struct fimc_dev *fimc = video_drvdata(file);
struct fimc_ctx *ctx = fimc->vid_cap.ctx;
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
- return -EINVAL;
-
return fimc_fill_format(&ctx->d_frame, f);
}
@@ -833,9 +833,6 @@
struct v4l2_mbus_framefmt mf;
struct fimc_fmt *ffmt = NULL;
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
- return -EINVAL;
-
if (pix->pixelformat == V4L2_PIX_FMT_JPEG) {
fimc_capture_try_format(ctx, &pix->width, &pix->height,
NULL, &pix->pixelformat,
@@ -887,8 +884,6 @@
struct fimc_fmt *s_fmt = NULL;
int ret, i;
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
- return -EINVAL;
if (vb2_is_busy(&fimc->vid_cap.vbq))
return -EBUSY;
@@ -924,10 +919,10 @@
pix->width = mf->width;
pix->height = mf->height;
}
+
fimc_adjust_mplane_format(ff->fmt, pix->width, pix->height, pix);
for (i = 0; i < ff->fmt->colplanes; i++)
- ff->payload[i] =
- (pix->width * pix->height * ff->fmt->depth[i]) / 8;
+ ff->payload[i] = pix->plane_fmt[i].sizeimage;
set_frame_bounds(ff, pix->width, pix->height);
/* Reset the composition rectangle if not yet configured */
@@ -1045,18 +1040,22 @@
{
struct fimc_dev *fimc = video_drvdata(file);
struct fimc_pipeline *p = &fimc->pipeline;
+ struct v4l2_subdev *sd = p->subdevs[IDX_SENSOR];
int ret;
if (fimc_capture_active(fimc))
return -EBUSY;
- media_entity_pipeline_start(&p->subdevs[IDX_SENSOR]->entity,
- p->m_pipeline);
+ ret = media_entity_pipeline_start(&sd->entity, p->m_pipeline);
+ if (ret < 0)
+ return ret;
if (fimc->vid_cap.user_subdev_api) {
ret = fimc_pipeline_validate(fimc);
- if (ret)
+ if (ret < 0) {
+ media_entity_pipeline_stop(&sd->entity);
return ret;
+ }
}
return vb2_streamon(&fimc->vid_cap.vbq, type);
}
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index fedcd56..a4646ca 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -153,7 +153,7 @@
.colplanes = 2,
.flags = FMT_FLAGS_M2M,
}, {
- .name = "YUV 4:2:0 non-contiguous 2-planar, Y/CbCr",
+ .name = "YUV 4:2:0 non-contig. 2p, Y/CbCr",
.fourcc = V4L2_PIX_FMT_NV12M,
.color = FIMC_FMT_YCBCR420,
.depth = { 8, 4 },
@@ -161,7 +161,7 @@
.colplanes = 2,
.flags = FMT_FLAGS_M2M,
}, {
- .name = "YUV 4:2:0 non-contiguous 3-planar, Y/Cb/Cr",
+ .name = "YUV 4:2:0 non-contig. 3p, Y/Cb/Cr",
.fourcc = V4L2_PIX_FMT_YUV420M,
.color = FIMC_FMT_YCBCR420,
.depth = { 8, 2, 2 },
@@ -169,7 +169,7 @@
.colplanes = 3,
.flags = FMT_FLAGS_M2M,
}, {
- .name = "YUV 4:2:0 non-contiguous 2-planar, Y/CbCr, tiled",
+ .name = "YUV 4:2:0 non-contig. 2p, tiled",
.fourcc = V4L2_PIX_FMT_NV12MT,
.color = FIMC_FMT_YCBCR420,
.depth = { 8, 4 },
@@ -615,7 +615,7 @@
ctx->effect.type = FIMC_REG_CIIMGEFF_FIN_BYPASS;
if (!handler->error) {
- v4l2_ctrl_cluster(3, &ctrls->colorfx);
+ v4l2_ctrl_cluster(2, &ctrls->colorfx);
ctrls->ready = true;
}
@@ -641,7 +641,7 @@
if (!ctrls->ready)
return;
- mutex_lock(&ctrls->handler.lock);
+ mutex_lock(ctrls->handler.lock);
v4l2_ctrl_activate(ctrls->rotate, active);
v4l2_ctrl_activate(ctrls->hflip, active);
v4l2_ctrl_activate(ctrls->vflip, active);
@@ -660,7 +660,7 @@
ctx->hflip = 0;
ctx->vflip = 0;
}
- mutex_unlock(&ctrls->handler.lock);
+ mutex_unlock(ctrls->handler.lock);
}
/* Update maximum value of the alpha color control */
@@ -741,8 +741,8 @@
pix->width = width;
for (i = 0; i < pix->num_planes; ++i) {
- u32 bpl = pix->plane_fmt[i].bytesperline;
- u32 *sizeimage = &pix->plane_fmt[i].sizeimage;
+ struct v4l2_plane_pix_format *plane_fmt = &pix->plane_fmt[i];
+ u32 bpl = plane_fmt->bytesperline;
if (fmt->colplanes > 1 && (bpl == 0 || bpl < pix->width))
bpl = pix->width; /* Planar */
@@ -754,8 +754,9 @@
if (i == 0) /* Same bytesperline for each plane. */
bytesperline = bpl;
- pix->plane_fmt[i].bytesperline = bytesperline;
- *sizeimage = (pix->width * pix->height * fmt->depth[i]) / 8;
+ plane_fmt->bytesperline = bytesperline;
+ plane_fmt->sizeimage = max((pix->width * pix->height *
+ fmt->depth[i]) / 8, plane_fmt->sizeimage);
}
}
diff --git a/drivers/media/video/s5p-fimc/fimc-lite.c b/drivers/media/video/s5p-fimc/fimc-lite.c
index 400d701a..74ff310 100644
--- a/drivers/media/video/s5p-fimc/fimc-lite.c
+++ b/drivers/media/video/s5p-fimc/fimc-lite.c
@@ -451,34 +451,44 @@
static int fimc_lite_open(struct file *file)
{
struct fimc_lite *fimc = video_drvdata(file);
- int ret = v4l2_fh_open(file);
+ int ret;
- if (ret)
- return ret;
+ if (mutex_lock_interruptible(&fimc->lock))
+ return -ERESTARTSYS;
set_bit(ST_FLITE_IN_USE, &fimc->state);
- pm_runtime_get_sync(&fimc->pdev->dev);
+ ret = pm_runtime_get_sync(&fimc->pdev->dev);
+ if (ret < 0)
+ goto done;
- if (++fimc->ref_count != 1 || fimc->out_path != FIMC_IO_DMA)
- return ret;
+ ret = v4l2_fh_open(file);
+ if (ret < 0)
+ goto done;
- ret = fimc_pipeline_initialize(&fimc->pipeline, &fimc->vfd->entity,
- true);
- if (ret < 0) {
- v4l2_err(fimc->vfd, "Video pipeline initialization failed\n");
- pm_runtime_put_sync(&fimc->pdev->dev);
- fimc->ref_count--;
- v4l2_fh_release(file);
- clear_bit(ST_FLITE_IN_USE, &fimc->state);
+ if (++fimc->ref_count == 1 && fimc->out_path == FIMC_IO_DMA) {
+ ret = fimc_pipeline_initialize(&fimc->pipeline,
+ &fimc->vfd->entity, true);
+ if (ret < 0) {
+ pm_runtime_put_sync(&fimc->pdev->dev);
+ fimc->ref_count--;
+ v4l2_fh_release(file);
+ clear_bit(ST_FLITE_IN_USE, &fimc->state);
+ }
+
+ fimc_lite_clear_event_counters(fimc);
}
-
- fimc_lite_clear_event_counters(fimc);
+done:
+ mutex_unlock(&fimc->lock);
return ret;
}
static int fimc_lite_close(struct file *file)
{
struct fimc_lite *fimc = video_drvdata(file);
+ int ret;
+
+ if (mutex_lock_interruptible(&fimc->lock))
+ return -ERESTARTSYS;
if (--fimc->ref_count == 0 && fimc->out_path == FIMC_IO_DMA) {
clear_bit(ST_FLITE_IN_USE, &fimc->state);
@@ -492,20 +502,39 @@
if (fimc->ref_count == 0)
vb2_queue_release(&fimc->vb_queue);
- return v4l2_fh_release(file);
+ ret = v4l2_fh_release(file);
+
+ mutex_unlock(&fimc->lock);
+ return ret;
}
static unsigned int fimc_lite_poll(struct file *file,
struct poll_table_struct *wait)
{
struct fimc_lite *fimc = video_drvdata(file);
- return vb2_poll(&fimc->vb_queue, file, wait);
+ int ret;
+
+ if (mutex_lock_interruptible(&fimc->lock))
+ return POLL_ERR;
+
+ ret = vb2_poll(&fimc->vb_queue, file, wait);
+ mutex_unlock(&fimc->lock);
+
+ return ret;
}
static int fimc_lite_mmap(struct file *file, struct vm_area_struct *vma)
{
struct fimc_lite *fimc = video_drvdata(file);
- return vb2_mmap(&fimc->vb_queue, vma);
+ int ret;
+
+ if (mutex_lock_interruptible(&fimc->lock))
+ return -ERESTARTSYS;
+
+ ret = vb2_mmap(&fimc->vb_queue, vma);
+ mutex_unlock(&fimc->lock);
+
+ return ret;
}
static const struct v4l2_file_operations fimc_lite_fops = {
@@ -762,7 +791,9 @@
if (fimc_lite_active(fimc))
return -EBUSY;
- media_entity_pipeline_start(&sensor->entity, p->m_pipeline);
+ ret = media_entity_pipeline_start(&sensor->entity, p->m_pipeline);
+ if (ret < 0)
+ return ret;
ret = fimc_pipeline_validate(fimc);
if (ret) {
@@ -1508,7 +1539,7 @@
return 0;
ret = fimc_lite_stop_capture(fimc, suspend);
- if (ret)
+ if (ret < 0 || !fimc_lite_active(fimc))
return ret;
return fimc_pipeline_shutdown(&fimc->pipeline);
diff --git a/drivers/media/video/s5p-fimc/fimc-mdevice.c b/drivers/media/video/s5p-fimc/fimc-mdevice.c
index 6753c45..52cef48 100644
--- a/drivers/media/video/s5p-fimc/fimc-mdevice.c
+++ b/drivers/media/video/s5p-fimc/fimc-mdevice.c
@@ -193,9 +193,13 @@
int fimc_pipeline_shutdown(struct fimc_pipeline *p)
{
- struct media_entity *me = &p->subdevs[IDX_SENSOR]->entity;
+ struct media_entity *me;
int ret;
+ if (!p || !p->subdevs[IDX_SENSOR])
+ return -EINVAL;
+
+ me = &p->subdevs[IDX_SENSOR]->entity;
mutex_lock(&me->parent->graph_mutex);
ret = __fimc_pipeline_shutdown(p);
mutex_unlock(&me->parent->graph_mutex);
@@ -498,12 +502,12 @@
* @source: the source entity to create links to all fimc entities from
* @sensor: sensor subdev linked to FIMC[fimc_id] entity, may be null
* @pad: the source entity pad index
- * @fimc_id: index of the fimc device for which link should be enabled
+ * @link_mask: bitmask of the fimc devices for which link should be enabled
*/
static int __fimc_md_create_fimc_sink_links(struct fimc_md *fmd,
struct media_entity *source,
struct v4l2_subdev *sensor,
- int pad, int fimc_id)
+ int pad, int link_mask)
{
struct fimc_sensor_info *s_info;
struct media_entity *sink;
@@ -520,7 +524,7 @@
if (!fmd->fimc[i]->variant->has_cam_if)
continue;
- flags = (i == fimc_id) ? MEDIA_LNK_FL_ENABLED : 0;
+ flags = ((1 << i) & link_mask) ? MEDIA_LNK_FL_ENABLED : 0;
sink = &fmd->fimc[i]->vid_cap.subdev.entity;
ret = media_entity_create_link(source, pad, sink,
@@ -552,7 +556,10 @@
if (!fmd->fimc_lite[i])
continue;
- flags = (i == fimc_id) ? MEDIA_LNK_FL_ENABLED : 0;
+ if (link_mask & (1 << (i + FIMC_MAX_DEVS)))
+ flags = MEDIA_LNK_FL_ENABLED;
+ else
+ flags = 0;
sink = &fmd->fimc_lite[i]->subdev.entity;
ret = media_entity_create_link(source, pad, sink,
@@ -614,9 +621,8 @@
struct s5p_fimc_isp_info *pdata;
struct fimc_sensor_info *s_info;
struct media_entity *source, *sink;
- int i, pad, fimc_id = 0;
- int ret = 0;
- u32 flags;
+ int i, pad, fimc_id = 0, ret = 0;
+ u32 flags, link_mask = 0;
for (i = 0; i < fmd->num_sensors; i++) {
if (fmd->sensor[i].subdev == NULL)
@@ -668,19 +674,20 @@
if (source == NULL)
continue;
+ link_mask = 1 << fimc_id++;
ret = __fimc_md_create_fimc_sink_links(fmd, source, sensor,
- pad, fimc_id++);
+ pad, link_mask);
}
- fimc_id = 0;
for (i = 0; i < ARRAY_SIZE(fmd->csis); i++) {
if (fmd->csis[i].sd == NULL)
continue;
source = &fmd->csis[i].sd->entity;
pad = CSIS_PAD_SOURCE;
+ link_mask = 1 << fimc_id++;
ret = __fimc_md_create_fimc_sink_links(fmd, source, NULL,
- pad, fimc_id++);
+ pad, link_mask);
}
/* Create immutable links between each FIMC's subdev and video node */
@@ -734,8 +741,8 @@
}
static int __fimc_md_set_camclk(struct fimc_md *fmd,
- struct fimc_sensor_info *s_info,
- bool on)
+ struct fimc_sensor_info *s_info,
+ bool on)
{
struct s5p_fimc_isp_info *pdata = s_info->pdata;
struct fimc_camclk_info *camclk;
@@ -744,12 +751,10 @@
if (WARN_ON(pdata->clk_id >= FIMC_MAX_CAMCLKS) || fmd == NULL)
return -EINVAL;
- if (s_info->clk_on == on)
- return 0;
camclk = &fmd->camclk[pdata->clk_id];
- dbg("camclk %d, f: %lu, clk: %p, on: %d",
- pdata->clk_id, pdata->clk_frequency, camclk, on);
+ dbg("camclk %d, f: %lu, use_count: %d, on: %d",
+ pdata->clk_id, pdata->clk_frequency, camclk->use_count, on);
if (on) {
if (camclk->use_count > 0 &&
@@ -760,11 +765,9 @@
clk_set_rate(camclk->clock, pdata->clk_frequency);
camclk->frequency = pdata->clk_frequency;
ret = clk_enable(camclk->clock);
+ dbg("Enabled camclk %d: f: %lu", pdata->clk_id,
+ clk_get_rate(camclk->clock));
}
- s_info->clk_on = 1;
- dbg("Enabled camclk %d: f: %lu", pdata->clk_id,
- clk_get_rate(camclk->clock));
-
return ret;
}
@@ -773,7 +776,6 @@
if (--camclk->use_count == 0) {
clk_disable(camclk->clock);
- s_info->clk_on = 0;
dbg("Disabled camclk %d", pdata->clk_id);
}
return ret;
@@ -789,8 +791,6 @@
* devices to which sensors can be attached, either directly or through
* the MIPI CSI receiver. The clock is allowed here to be used by
* multiple sensors concurrently if they use same frequency.
- * The per sensor subdev clk_on attribute helps to synchronize accesses
- * to the sclk_cam clocks from the video and media device nodes.
* This function should only be called when the graph mutex is held.
*/
int fimc_md_set_camclk(struct v4l2_subdev *sd, bool on)
diff --git a/drivers/media/video/s5p-fimc/fimc-mdevice.h b/drivers/media/video/s5p-fimc/fimc-mdevice.h
index 3b8a349..1f5dbaf 100644
--- a/drivers/media/video/s5p-fimc/fimc-mdevice.h
+++ b/drivers/media/video/s5p-fimc/fimc-mdevice.h
@@ -47,7 +47,6 @@
* @pdata: sensor's atrributes passed as media device's platform data
* @subdev: image sensor v4l2 subdev
* @host: fimc device the sensor is currently linked to
- * @clk_on: sclk_cam clock's state associated with this subdev
*
* This data structure applies to image sensor and the writeback subdevs.
*/
@@ -55,7 +54,6 @@
struct s5p_fimc_isp_info *pdata;
struct v4l2_subdev *subdev;
struct fimc_dev *host;
- bool clk_on;
};
/**
diff --git a/drivers/media/video/s5p-mfc/regs-mfc.h b/drivers/media/video/s5p-mfc/regs-mfc.h
index 053a8a8..a19bece 100644
--- a/drivers/media/video/s5p-mfc/regs-mfc.h
+++ b/drivers/media/video/s5p-mfc/regs-mfc.h
@@ -164,10 +164,15 @@
decoded pic */
#define S5P_FIMV_SI_DISPLAY_Y_ADR 0x2010 /* luma addr of displayed pic */
#define S5P_FIMV_SI_DISPLAY_C_ADR 0x2014 /* chroma addrof displayed pic */
+
#define S5P_FIMV_SI_CONSUMED_BYTES 0x2018 /* Consumed number of bytes to
decode a frame */
#define S5P_FIMV_SI_DISPLAY_STATUS 0x201c /* status of decoded picture */
+#define S5P_FIMV_SI_DECODE_Y_ADR 0x2024 /* luma addr of decoded pic */
+#define S5P_FIMV_SI_DECODE_C_ADR 0x2028 /* chroma addrof decoded pic */
+#define S5P_FIMV_SI_DECODE_STATUS 0x202c /* status of decoded picture */
+
#define S5P_FIMV_SI_CH0_SB_ST_ADR 0x2044 /* start addr of stream buf */
#define S5P_FIMV_SI_CH0_SB_FRM_SIZE 0x2048 /* size of stream buf */
#define S5P_FIMV_SI_CH0_DESC_ADR 0x204c /* addr of descriptor buf */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
index c25ec02..feea867 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
@@ -627,13 +627,13 @@
switch (ctrl->id) {
case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY:
- ctx->loop_filter_mpeg4 = ctrl->val;
+ ctx->display_delay = ctrl->val;
break;
case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE:
ctx->display_delay_enable = ctrl->val;
break;
case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER:
- ctx->display_delay = ctrl->val;
+ ctx->loop_filter_mpeg4 = ctrl->val;
break;
case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE:
ctx->slice_interface = ctrl->val;
@@ -996,6 +996,7 @@
for (i = 0; i < NUM_CTRLS; i++) {
if (IS_MFC51_PRIV(controls[i].id)) {
+ memset(&cfg, 0, sizeof(struct v4l2_ctrl_config));
cfg.ops = &s5p_mfc_dec_ctrl_ops;
cfg.id = controls[i].id;
cfg.min = controls[i].minimum;
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
index acedb20..158b789 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
@@ -243,12 +243,6 @@
.minimum = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
.maximum = V4L2_MPEG_VIDEO_H264_LEVEL_4_0,
.default_value = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
- .menu_skip_mask = ~(
- (1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_1) |
- (1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_2) |
- (1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_0) |
- (1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_1)
- ),
},
{
.id = V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL,
@@ -494,7 +488,7 @@
.type = V4L2_CTRL_TYPE_MENU,
.minimum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED,
.maximum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED,
- .default_value = 0,
+ .default_value = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED,
.menu_skip_mask = 0,
},
{
@@ -534,7 +528,7 @@
.type = V4L2_CTRL_TYPE_MENU,
.minimum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE,
.maximum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE,
- .default_value = 0,
+ .default_value = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE,
.menu_skip_mask = 0,
},
{
@@ -907,6 +901,8 @@
mfc_err("failed to try output format\n");
return -EINVAL;
}
+ v4l_bound_align_image(&pix_fmt_mp->width, 8, 1920, 1,
+ &pix_fmt_mp->height, 4, 1080, 1, 0);
} else {
mfc_err("invalid buf type\n");
return -EINVAL;
@@ -1777,6 +1773,7 @@
}
for (i = 0; i < NUM_CTRLS; i++) {
if (IS_MFC51_PRIV(controls[i].id)) {
+ memset(&cfg, 0, sizeof(struct v4l2_ctrl_config));
cfg.ops = &s5p_mfc_enc_ctrl_ops;
cfg.id = controls[i].id;
cfg.min = controls[i].minimum;
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_opr.h b/drivers/media/video/s5p-mfc/s5p_mfc_opr.h
index db83836..5932d1c 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_opr.h
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_opr.h
@@ -57,10 +57,12 @@
S5P_FIMV_SI_DISPLAY_Y_ADR) << \
MFC_OFFSET_SHIFT)
#define s5p_mfc_get_dec_y_adr() (readl(dev->regs_base + \
- S5P_FIMV_SI_DISPLAY_Y_ADR) << \
+ S5P_FIMV_SI_DECODE_Y_ADR) << \
MFC_OFFSET_SHIFT)
#define s5p_mfc_get_dspl_status() readl(dev->regs_base + \
S5P_FIMV_SI_DISPLAY_STATUS)
+#define s5p_mfc_get_dec_status() readl(dev->regs_base + \
+ S5P_FIMV_SI_DECODE_STATUS)
#define s5p_mfc_get_frame_type() (readl(dev->regs_base + \
S5P_FIMV_DECODE_FRAME_TYPE) \
& S5P_FIMV_DECODE_FRAME_MASK)
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_shm.h b/drivers/media/video/s5p-mfc/s5p_mfc_shm.h
index 764eac6..cf962a4 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_shm.h
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_shm.h
@@ -13,8 +13,7 @@
#ifndef S5P_MFC_SHM_H_
#define S5P_MFC_SHM_H_
-enum MFC_SHM_OFS
-{
+enum MFC_SHM_OFS {
EXTENEDED_DECODE_STATUS = 0x00, /* D */
SET_FRAME_TAG = 0x04, /* D */
GET_FRAME_TAG_TOP = 0x08, /* D */
diff --git a/drivers/media/video/smiapp/Kconfig b/drivers/media/video/smiapp/Kconfig
index f7b35ff..fb99ff1 100644
--- a/drivers/media/video/smiapp/Kconfig
+++ b/drivers/media/video/smiapp/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_SMIAPP
tristate "SMIA++/SMIA sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAVE_CLK
select VIDEO_SMIAPP_PLL
---help---
This is a generic driver for SMIA++/SMIA camera modules.
diff --git a/drivers/media/video/smiapp/smiapp-core.c b/drivers/media/video/smiapp/smiapp-core.c
index f518026..9cf5bda 100644
--- a/drivers/media/video/smiapp/smiapp-core.c
+++ b/drivers/media/video/smiapp/smiapp-core.c
@@ -31,7 +31,9 @@
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
#include <linux/v4l2-mediabus.h>
#include <media/v4l2-device.h>
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 3e050e1..1ad5ab6 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -1178,7 +1178,7 @@
return 0;
if (vt->type == t->mode && analog_ops->get_afc)
vt->afc = analog_ops->get_afc(&t->fe);
- if (t->mode != V4L2_TUNER_RADIO) {
+ if (vt->type != V4L2_TUNER_RADIO) {
vt->capability |= V4L2_TUNER_CAP_NORM;
vt->rangelow = tv_range[0] * 16;
vt->rangehigh = tv_range[1] * 16;
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 5ccbd46..0cbada1 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -656,7 +656,7 @@
SET_VALID_IOCTL(ops, VIDIOC_TRY_ENCODER_CMD, vidioc_try_encoder_cmd);
SET_VALID_IOCTL(ops, VIDIOC_DECODER_CMD, vidioc_decoder_cmd);
SET_VALID_IOCTL(ops, VIDIOC_TRY_DECODER_CMD, vidioc_try_decoder_cmd);
- if (ops->vidioc_g_parm || vdev->current_norm)
+ if (ops->vidioc_g_parm || vdev->vfl_type == VFL_TYPE_GRABBER)
set_bit(_IOC_NR(VIDIOC_G_PARM), valid_ioctls);
SET_VALID_IOCTL(ops, VIDIOC_S_PARM, vidioc_s_parm);
SET_VALID_IOCTL(ops, VIDIOC_G_TUNER, vidioc_g_tuner);
@@ -679,6 +679,9 @@
SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_PRESET, vidioc_query_dv_preset);
SET_VALID_IOCTL(ops, VIDIOC_S_DV_TIMINGS, vidioc_s_dv_timings);
SET_VALID_IOCTL(ops, VIDIOC_G_DV_TIMINGS, vidioc_g_dv_timings);
+ SET_VALID_IOCTL(ops, VIDIOC_ENUM_DV_TIMINGS, vidioc_enum_dv_timings);
+ SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_TIMINGS, vidioc_query_dv_timings);
+ SET_VALID_IOCTL(ops, VIDIOC_DV_TIMINGS_CAP, vidioc_dv_timings_cap);
/* yes, really vidioc_subscribe_event */
SET_VALID_IOCTL(ops, VIDIOC_DQEVENT, vidioc_subscribe_event);
SET_VALID_IOCTL(ops, VIDIOC_SUBSCRIBE_EVENT, vidioc_subscribe_event);
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index 91be4e8..d7fa896 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -1680,6 +1680,7 @@
break;
ret = 0;
+ p->parm.capture.readbuffers = 2;
if (ops->vidioc_g_std)
ret = ops->vidioc_g_std(file, fh, &std);
if (ret == 0)
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index 4d7391e..aae1720 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -2561,7 +2561,7 @@
} else if (vino_drvdata->decoder
&& (vino_drvdata->decoder_owner == VINO_NO_CHANNEL)) {
int input;
- int data_norm;
+ int data_norm = 0;
v4l2_std_id norm;
input = VINO_INPUT_COMPOSITE;
@@ -2651,7 +2651,7 @@
}
if (vino_drvdata->decoder_owner == vcs->channel) {
- int data_norm;
+ int data_norm = 0;
v4l2_std_id norm;
ret = decoder_call(video, s_routing,
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 0960d7f..08c1024 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -1149,10 +1149,14 @@
vivi_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
{
struct vivi_dev *dev = video_drvdata(file);
+ int err;
dprintk(dev, 1, "read called\n");
- return vb2_read(&dev->vb_vidq, data, count, ppos,
+ mutex_lock(&dev->mutex);
+ err = vb2_read(&dev->vb_vidq, data, count, ppos,
file->f_flags & O_NONBLOCK);
+ mutex_unlock(&dev->mutex);
+ return err;
}
static unsigned int
diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h
index d7166af..ca2754a 100644
--- a/drivers/media/video/zoran/zoran.h
+++ b/drivers/media/video/zoran/zoran.h
@@ -172,8 +172,10 @@
struct v4l2_jpegcompression jpg_comp; /* JPEG-specific capture settings */
};
+struct zoran_fh;
+
struct zoran_mapping {
- struct file *file;
+ struct zoran_fh *fh;
int count;
};
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index c573109..c6ccdeb 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -2811,7 +2811,7 @@
zoran_vm_close (struct vm_area_struct *vma)
{
struct zoran_mapping *map = vma->vm_private_data;
- struct zoran_fh *fh = map->file->private_data;
+ struct zoran_fh *fh = map->fh;
struct zoran *zr = fh->zr;
int i;
@@ -2938,7 +2938,7 @@
res = -ENOMEM;
goto mmap_unlock_and_return;
}
- map->file = file;
+ map->fh = fh;
map->count = 1;
vma->vm_ops = &zoran_vm_ops;
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e129c82..92144ed 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -286,6 +286,7 @@
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
+ select IRQ_DOMAIN
default n
help
Say yes here if you want support for Texas Instruments TWL6040 audio
diff --git a/drivers/mfd/ab5500-core.h b/drivers/mfd/ab5500-core.h
deleted file mode 100644
index 63b30b1..0000000
--- a/drivers/mfd/ab5500-core.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright (C) 2011 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Shared definitions and data structures for the AB5500 MFD driver
- */
-
-/* Read/write operation values. */
-#define AB5500_PERM_RD (0x01)
-#define AB5500_PERM_WR (0x02)
-
-/* Read/write permissions. */
-#define AB5500_PERM_RO (AB5500_PERM_RD)
-#define AB5500_PERM_RW (AB5500_PERM_RD | AB5500_PERM_WR)
-
-#define AB5500_MASK_BASE (0x60)
-#define AB5500_MASK_END (0x79)
-#define AB5500_CHIP_ID (0x20)
-
-/**
- * struct ab5500_reg_range
- * @first: the first address of the range
- * @last: the last address of the range
- * @perm: access permissions for the range
- */
-struct ab5500_reg_range {
- u8 first;
- u8 last;
- u8 perm;
-};
-
-/**
- * struct ab5500_i2c_ranges
- * @count: the number of ranges in the list
- * @range: the list of register ranges
- */
-struct ab5500_i2c_ranges {
- u8 nranges;
- u8 bankid;
- const struct ab5500_reg_range *range;
-};
-
-/**
- * struct ab5500_i2c_banks
- * @count: the number of ranges in the list
- * @range: the list of register ranges
- */
-struct ab5500_i2c_banks {
- u8 nbanks;
- const struct ab5500_i2c_ranges *bank;
-};
-
-/**
- * struct ab5500_bank
- * @slave_addr: I2C slave_addr found in AB5500 specification
- * @name: Documentation name of the bank. For reference
- */
-struct ab5500_bank {
- u8 slave_addr;
- const char *name;
-};
-
-static const struct ab5500_bank bankinfo[AB5500_NUM_BANKS] = {
- [AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = {
- AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP, "VIT_IO_I2C_CLK_TST_OTP"},
- [AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = {
- AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST, "VDDDIG_IO_I2C_CLK_TST"},
- [AB5500_BANK_VDENC] = {AB5500_ADDR_VDENC, "VDENC"},
- [AB5500_BANK_SIM_USBSIM] = {AB5500_ADDR_SIM_USBSIM, "SIM_USBSIM"},
- [AB5500_BANK_LED] = {AB5500_ADDR_LED, "LED"},
- [AB5500_BANK_ADC] = {AB5500_ADDR_ADC, "ADC"},
- [AB5500_BANK_RTC] = {AB5500_ADDR_RTC, "RTC"},
- [AB5500_BANK_STARTUP] = {AB5500_ADDR_STARTUP, "STARTUP"},
- [AB5500_BANK_DBI_ECI] = {AB5500_ADDR_DBI_ECI, "DBI-ECI"},
- [AB5500_BANK_CHG] = {AB5500_ADDR_CHG, "CHG"},
- [AB5500_BANK_FG_BATTCOM_ACC] = {
- AB5500_ADDR_FG_BATTCOM_ACC, "FG_BATCOM_ACC"},
- [AB5500_BANK_USB] = {AB5500_ADDR_USB, "USB"},
- [AB5500_BANK_IT] = {AB5500_ADDR_IT, "IT"},
- [AB5500_BANK_VIBRA] = {AB5500_ADDR_VIBRA, "VIBRA"},
- [AB5500_BANK_AUDIO_HEADSETUSB] = {
- AB5500_ADDR_AUDIO_HEADSETUSB, "AUDIO_HEADSETUSB"},
-};
-
-int ab5500_get_register_interruptible_raw(struct ab5500 *ab, u8 bank, u8 reg,
- u8 *value);
-int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank,
- u8 reg, u8 bitmask, u8 bitvalues);
diff --git a/drivers/mfd/mc13xxx-spi.c b/drivers/mfd/mc13xxx-spi.c
index 3fcdab3..03df422 100644
--- a/drivers/mfd/mc13xxx-spi.c
+++ b/drivers/mfd/mc13xxx-spi.c
@@ -49,10 +49,72 @@
.reg_bits = 7,
.pad_bits = 1,
.val_bits = 24,
+ .write_flag_mask = 0x80,
.max_register = MC13XXX_NUMREGS,
.cache_type = REGCACHE_NONE,
+ .use_single_rw = 1,
+};
+
+static int mc13xxx_spi_read(void *context, const void *reg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ unsigned char w[4] = { *((unsigned char *) reg), 0, 0, 0};
+ unsigned char r[4];
+ unsigned char *p = val;
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+ struct spi_transfer t = {
+ .tx_buf = w,
+ .rx_buf = r,
+ .len = 4,
+ };
+
+ struct spi_message m;
+ int ret;
+
+ if (val_size != 3 || reg_size != 1)
+ return -ENOTSUPP;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ ret = spi_sync(spi, &m);
+
+ memcpy(p, &r[1], 3);
+
+ return ret;
+}
+
+static int mc13xxx_spi_write(void *context, const void *data, size_t count)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+
+ if (count != 4)
+ return -ENOTSUPP;
+
+ return spi_write(spi, data, count);
+}
+
+/*
+ * We cannot use regmap-spi generic bus implementation here.
+ * The MC13783 chip will get corrupted if CS signal is deasserted
+ * and on i.Mx31 SoC (the target SoC for MC13783 PMIC) the SPI controller
+ * has the following errata (DSPhl22960):
+ * "The CSPI negates SS when the FIFO becomes empty with
+ * SSCTL= 0. Software cannot guarantee that the FIFO will not
+ * drain because of higher priority interrupts and the
+ * non-realtime characteristics of the operating system. As a
+ * result, the SS will negate before all of the data has been
+ * transferred to/from the peripheral."
+ * We workaround this by accessing the SPI controller with a
+ * single transfert.
+ */
+
+static struct regmap_bus regmap_mc13xxx_bus = {
+ .write = mc13xxx_spi_write,
+ .read = mc13xxx_spi_read,
};
static int mc13xxx_spi_probe(struct spi_device *spi)
@@ -73,12 +135,13 @@
dev_set_drvdata(&spi->dev, mc13xxx);
spi->mode = SPI_MODE_0 | SPI_CS_HIGH;
- spi->bits_per_word = 32;
mc13xxx->dev = &spi->dev;
mutex_init(&mc13xxx->lock);
- mc13xxx->regmap = regmap_init_spi(spi, &mc13xxx_regmap_spi_config);
+ mc13xxx->regmap = regmap_init(&spi->dev, ®map_mc13xxx_bus, &spi->dev,
+ &mc13xxx_regmap_spi_config);
+
if (IS_ERR(mc13xxx->regmap)) {
ret = PTR_ERR(mc13xxx->regmap);
dev_err(mc13xxx->dev, "Failed to initialize register map: %d\n",
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 7e96bb2..41088ec 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -25,6 +25,7 @@
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
+#include <linux/gpio.h>
#include <plat/cpu.h>
#include <plat/usb.h>
#include <linux/pm_runtime.h>
@@ -500,8 +501,21 @@
dev_dbg(dev, "starting TI HSUSB Controller\n");
pm_runtime_get_sync(dev);
- spin_lock_irqsave(&omap->lock, flags);
+ if (pdata->ehci_data->phy_reset) {
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+ gpio_request_one(pdata->ehci_data->reset_gpio_port[0],
+ GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+ gpio_request_one(pdata->ehci_data->reset_gpio_port[1],
+ GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
+
+ /* Hold the PHY in RESET for enough time till DIR is high */
+ udelay(10);
+ }
+
+ spin_lock_irqsave(&omap->lock, flags);
omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
@@ -581,9 +595,39 @@
}
spin_unlock_irqrestore(&omap->lock, flags);
+
+ if (pdata->ehci_data->phy_reset) {
+ /* Hold the PHY in RESET for enough time till
+ * PHY is settled and ready
+ */
+ udelay(10);
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+ gpio_set_value_cansleep
+ (pdata->ehci_data->reset_gpio_port[0], 1);
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+ gpio_set_value_cansleep
+ (pdata->ehci_data->reset_gpio_port[1], 1);
+ }
+
pm_runtime_put_sync(dev);
}
+static void omap_usbhs_deinit(struct device *dev)
+{
+ struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
+ struct usbhs_omap_platform_data *pdata = &omap->platdata;
+
+ if (pdata->ehci_data->phy_reset) {
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+ gpio_free(pdata->ehci_data->reset_gpio_port[0]);
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+ gpio_free(pdata->ehci_data->reset_gpio_port[1]);
+ }
+}
+
/**
* usbhs_omap_probe - initialize TI-based HCDs
@@ -767,6 +811,7 @@
goto end_probe;
err_alloc:
+ omap_usbhs_deinit(&pdev->dev);
iounmap(omap->tll_base);
err_tll:
@@ -818,6 +863,7 @@
{
struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
+ omap_usbhs_deinit(&pdev->dev);
iounmap(omap->tll_base);
iounmap(omap->uhh_base);
clk_put(omap->init_60m_fclk);
diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c
index 00c0aba..c4a69f1 100644
--- a/drivers/mfd/palmas.c
+++ b/drivers/mfd/palmas.c
@@ -356,7 +356,14 @@
}
}
- ret = regmap_add_irq_chip(palmas->regmap[1], palmas->irq,
+ /* Change IRQ into clear on read mode for efficiency */
+ slave = PALMAS_BASE_TO_SLAVE(PALMAS_INTERRUPT_BASE);
+ addr = PALMAS_BASE_TO_REG(PALMAS_INTERRUPT_BASE, PALMAS_INT_CTRL);
+ reg = PALMAS_INT_CTRL_INT_CLEAR;
+
+ regmap_write(palmas->regmap[slave], addr, reg);
+
+ ret = regmap_add_irq_chip(palmas->regmap[slave], palmas->irq,
IRQF_ONESHOT | IRQF_TRIGGER_LOW, -1, &palmas_irq_chip,
&palmas->irq_data);
if (ret < 0)
@@ -441,6 +448,9 @@
goto err;
}
+ children[PALMAS_PMIC_ID].platform_data = pdata->pmic_pdata;
+ children[PALMAS_PMIC_ID].pdata_size = sizeof(*pdata->pmic_pdata);
+
ret = mfd_add_devices(palmas->dev, -1,
children, ARRAY_SIZE(palmas_children),
NULL, regmap_irq_chip_get_base(palmas->irq_data));
@@ -472,6 +482,7 @@
{ "twl6035", },
{ "twl6037", },
{ "tps65913", },
+ { /* end */ }
};
MODULE_DEVICE_TABLE(i2c, palmas_i2c_id);
diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
index 373f423..947a06a 100644
--- a/drivers/mfd/stmpe-i2c.c
+++ b/drivers/mfd/stmpe-i2c.c
@@ -6,7 +6,7 @@
*
* License Terms: GNU General Public License, version 2
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics
+ * Author: Viresh Kumar <viresh.linux@gmail.com> for ST Microelectronics
*/
#include <linux/i2c.h>
diff --git a/drivers/mfd/stmpe-spi.c b/drivers/mfd/stmpe-spi.c
index afd4590..9edfe86 100644
--- a/drivers/mfd/stmpe-spi.c
+++ b/drivers/mfd/stmpe-spi.c
@@ -4,7 +4,7 @@
* Copyright (C) ST Microelectronics SA 2011
*
* License Terms: GNU General Public License, version 2
- * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics
+ * Author: Viresh Kumar <viresh.linux@gmail.com> for ST Microelectronics
*/
#include <linux/spi/spi.h>
@@ -146,4 +146,4 @@
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("STMPE MFD SPI Interface Driver");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c
index db194e4..61c097a 100644
--- a/drivers/mfd/tps65217.c
+++ b/drivers/mfd/tps65217.c
@@ -24,6 +24,7 @@
#include <linux/slab.h>
#include <linux/regmap.h>
#include <linux/err.h>
+#include <linux/regulator/of_regulator.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tps65217.h>
@@ -132,6 +133,61 @@
}
EXPORT_SYMBOL_GPL(tps65217_clear_bits);
+#ifdef CONFIG_OF
+static struct of_regulator_match reg_matches[] = {
+ { .name = "dcdc1", .driver_data = (void *)TPS65217_DCDC_1 },
+ { .name = "dcdc2", .driver_data = (void *)TPS65217_DCDC_2 },
+ { .name = "dcdc3", .driver_data = (void *)TPS65217_DCDC_3 },
+ { .name = "ldo1", .driver_data = (void *)TPS65217_LDO_1 },
+ { .name = "ldo2", .driver_data = (void *)TPS65217_LDO_2 },
+ { .name = "ldo3", .driver_data = (void *)TPS65217_LDO_3 },
+ { .name = "ldo4", .driver_data = (void *)TPS65217_LDO_4 },
+};
+
+static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client)
+{
+ struct device_node *node = client->dev.of_node;
+ struct tps65217_board *pdata;
+ struct device_node *regs;
+ int count = ARRAY_SIZE(reg_matches);
+ int ret, i;
+
+ regs = of_find_node_by_name(node, "regulators");
+ if (!regs)
+ return NULL;
+
+ ret = of_regulator_match(&client->dev, regs, reg_matches, count);
+ of_node_put(regs);
+ if ((ret < 0) || (ret > count))
+ return NULL;
+
+ count = ret;
+ pdata = devm_kzalloc(&client->dev, count * sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ for (i = 0; i < count; i++) {
+ if (!reg_matches[i].init_data || !reg_matches[i].of_node)
+ continue;
+
+ pdata->tps65217_init_data[i] = reg_matches[i].init_data;
+ pdata->of_node[i] = reg_matches[i].of_node;
+ }
+
+ return pdata;
+}
+
+static struct of_device_id tps65217_of_match[] = {
+ { .compatible = "ti,tps65217", },
+ { },
+};
+#else
+static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client)
+{
+ return NULL;
+}
+#endif
+
static struct regmap_config tps65217_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -141,10 +197,14 @@
const struct i2c_device_id *ids)
{
struct tps65217 *tps;
+ struct regulator_init_data *reg_data;
struct tps65217_board *pdata = client->dev.platform_data;
int i, ret;
unsigned int version;
+ if (!pdata && client->dev.of_node)
+ pdata = tps65217_parse_dt(client);
+
tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
if (!tps)
return -ENOMEM;
@@ -182,8 +242,9 @@
}
pdev->dev.parent = tps->dev;
- platform_device_add_data(pdev, &pdata->tps65217_init_data[i],
- sizeof(pdata->tps65217_init_data[i]));
+ pdev->dev.of_node = pdata->of_node[i];
+ reg_data = pdata->tps65217_init_data[i];
+ platform_device_add_data(pdev, reg_data, sizeof(*reg_data));
tps->regulator_pdev[i] = pdev;
platform_device_add(pdev);
@@ -212,6 +273,8 @@
static struct i2c_driver tps65217_driver = {
.driver = {
.name = "tps65217",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(tps65217_of_match),
},
.id_table = tps65217_id_table,
.probe = tps65217_probe,
diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c
index 93936f1..23f5463 100644
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -835,7 +835,7 @@
struct mei_cl *cl,
struct mei_io_list *cmpl_list)
{
- if ((*slots * sizeof(u32)) >= (sizeof(struct mei_msg_hdr) +
+ if ((*slots * sizeof(u32)) < (sizeof(struct mei_msg_hdr) +
sizeof(struct hbm_flow_control))) {
/* return the cancel routine */
list_del(&cb_pos->cb_list);
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index c703332..783fcd7 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -982,7 +982,7 @@
err = request_threaded_irq(pdev->irq,
NULL,
mei_interrupt_thread_handler,
- 0, mei_driver_name, dev);
+ IRQF_ONESHOT, mei_driver_name, dev);
else
err = request_threaded_irq(pdev->irq,
mei_interrupt_quick_handler,
@@ -992,7 +992,7 @@
if (err) {
dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n",
pdev->irq);
- goto unmap_memory;
+ goto disable_msi;
}
INIT_DELAYED_WORK(&dev->timer_work, mei_timer);
if (mei_hw_init(dev)) {
@@ -1023,8 +1023,8 @@
mei_disable_interrupts(dev);
flush_scheduled_work();
free_irq(pdev->irq, dev);
+disable_msi:
pci_disable_msi(pdev);
-unmap_memory:
pci_iounmap(pdev, dev->mem_addr);
free_device:
kfree(dev);
@@ -1101,6 +1101,8 @@
pci_release_regions(pdev);
pci_disable_device(pdev);
+
+ misc_deregister(&mei_misc_device);
}
#ifdef CONFIG_PM
static int mei_pci_suspend(struct device *device)
@@ -1145,7 +1147,7 @@
err = request_threaded_irq(pdev->irq,
NULL,
mei_interrupt_thread_handler,
- 0, mei_driver_name, dev);
+ IRQF_ONESHOT, mei_driver_name, dev);
else
err = request_threaded_irq(pdev->irq,
mei_interrupt_quick_handler,
@@ -1216,7 +1218,6 @@
*/
static void __exit mei_exit_module(void)
{
- misc_deregister(&mei_misc_device);
pci_unregister_driver(&mei_driver);
pr_debug("unloaded successfully.\n");
diff --git a/drivers/misc/mei/wd.c b/drivers/misc/mei/wd.c
index 6be5605..e2ec050 100644
--- a/drivers/misc/mei/wd.c
+++ b/drivers/misc/mei/wd.c
@@ -341,7 +341,7 @@
};
static const struct watchdog_info wd_info = {
.identity = INTEL_AMT_WATCHDOG_ID,
- .options = WDIOF_KEEPALIVEPING,
+ .options = WDIOF_KEEPALIVEPING | WDIOF_ALARMONLY,
};
static struct watchdog_device amt_wd_dev = {
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 17bbacb..87b251a 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -452,9 +452,9 @@
if (msg->activate_gru_mq_desc_gpa !=
part_uv->activate_gru_mq_desc_gpa) {
- spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+ spin_lock(&part_uv->flags_lock);
part_uv->flags &= ~XPC_P_CACHED_ACTIVATE_GRU_MQ_DESC_UV;
- spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+ spin_unlock(&part_uv->flags_lock);
part_uv->activate_gru_mq_desc_gpa =
msg->activate_gru_mq_desc_gpa;
}
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index dd2d374..f1c84de 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -554,7 +554,6 @@
struct mmc_request mrq = {NULL};
struct mmc_command cmd = {0};
struct mmc_data data = {0};
- unsigned int timeout_us;
struct scatterlist sg;
@@ -574,23 +573,12 @@
cmd.arg = 0;
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
- data.timeout_ns = card->csd.tacc_ns * 100;
- data.timeout_clks = card->csd.tacc_clks * 100;
-
- timeout_us = data.timeout_ns / 1000;
- timeout_us += data.timeout_clks * 1000 /
- (card->host->ios.clock / 1000);
-
- if (timeout_us > 100000) {
- data.timeout_ns = 100000000;
- data.timeout_clks = 0;
- }
-
data.blksz = 4;
data.blocks = 1;
data.flags = MMC_DATA_READ;
data.sg = &sg;
data.sg_len = 1;
+ mmc_set_data_timeout(&data, card);
mrq.cmd = &cmd;
mrq.data = &data;
@@ -862,9 +850,7 @@
goto retry;
if (!err)
mmc_blk_reset_success(md, type);
- spin_lock_irq(&md->lock);
- __blk_end_request(req, err, blk_rq_bytes(req));
- spin_unlock_irq(&md->lock);
+ blk_end_request(req, err, blk_rq_bytes(req));
return err ? 0 : 1;
}
@@ -946,9 +932,7 @@
if (!err)
mmc_blk_reset_success(md, type);
out:
- spin_lock_irq(&md->lock);
- __blk_end_request(req, err, blk_rq_bytes(req));
- spin_unlock_irq(&md->lock);
+ blk_end_request(req, err, blk_rq_bytes(req));
return err ? 0 : 1;
}
@@ -963,9 +947,7 @@
if (ret)
ret = -EIO;
- spin_lock_irq(&md->lock);
- __blk_end_request_all(req, ret);
- spin_unlock_irq(&md->lock);
+ blk_end_request_all(req, ret);
return ret ? 0 : 1;
}
@@ -1264,14 +1246,10 @@
blocks = mmc_sd_num_wr_blocks(card);
if (blocks != (u32)-1) {
- spin_lock_irq(&md->lock);
- ret = __blk_end_request(req, 0, blocks << 9);
- spin_unlock_irq(&md->lock);
+ ret = blk_end_request(req, 0, blocks << 9);
}
} else {
- spin_lock_irq(&md->lock);
- ret = __blk_end_request(req, 0, brq->data.bytes_xfered);
- spin_unlock_irq(&md->lock);
+ ret = blk_end_request(req, 0, brq->data.bytes_xfered);
}
return ret;
}
@@ -1323,10 +1301,8 @@
* A block was successfully transferred.
*/
mmc_blk_reset_success(md, type);
- spin_lock_irq(&md->lock);
- ret = __blk_end_request(req, 0,
+ ret = blk_end_request(req, 0,
brq->data.bytes_xfered);
- spin_unlock_irq(&md->lock);
/*
* If the blk_end_request function returns non-zero even
* though all data has been transferred and no errors
@@ -1376,10 +1352,8 @@
* time, so we only reach here after trying to
* read a single sector.
*/
- spin_lock_irq(&md->lock);
- ret = __blk_end_request(req, -EIO,
+ ret = blk_end_request(req, -EIO,
brq->data.blksz);
- spin_unlock_irq(&md->lock);
if (!ret)
goto start_new_req;
break;
@@ -1400,12 +1374,10 @@
return 1;
cmd_abort:
- spin_lock_irq(&md->lock);
if (mmc_card_removed(card))
req->cmd_flags |= REQ_QUIET;
while (ret)
- ret = __blk_end_request(req, -EIO, blk_rq_cur_bytes(req));
- spin_unlock_irq(&md->lock);
+ ret = blk_end_request(req, -EIO, blk_rq_cur_bytes(req));
start_new_req:
if (rqc) {
@@ -1429,9 +1401,7 @@
ret = mmc_blk_part_switch(card, md);
if (ret) {
if (req) {
- spin_lock_irq(&md->lock);
- __blk_end_request_all(req, -EIO);
- spin_unlock_irq(&md->lock);
+ blk_end_request_all(req, -EIO);
}
ret = 0;
goto out;
diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile
index dca4428..38ed210 100644
--- a/drivers/mmc/core/Makefile
+++ b/drivers/mmc/core/Makefile
@@ -7,6 +7,6 @@
mmc.o mmc_ops.o sd.o sd_ops.o \
sdio.o sdio_ops.o sdio_bus.o \
sdio_cis.o sdio_io.o sdio_irq.o \
- quirks.o cd-gpio.o
+ quirks.o slot-gpio.o
mmc_core-$(CONFIG_DEBUG_FS) += debugfs.o
diff --git a/drivers/mmc/core/cd-gpio.c b/drivers/mmc/core/cd-gpio.c
deleted file mode 100644
index f13e38d..0000000
--- a/drivers/mmc/core/cd-gpio.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Generic GPIO card-detect helper
- *
- * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/jiffies.h>
-#include <linux/mmc/cd-gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-
-struct mmc_cd_gpio {
- unsigned int gpio;
- char label[0];
-};
-
-static irqreturn_t mmc_cd_gpio_irqt(int irq, void *dev_id)
-{
- /* Schedule a card detection after a debounce timeout */
- mmc_detect_change(dev_id, msecs_to_jiffies(100));
- return IRQ_HANDLED;
-}
-
-int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio)
-{
- size_t len = strlen(dev_name(host->parent)) + 4;
- struct mmc_cd_gpio *cd;
- int irq = gpio_to_irq(gpio);
- int ret;
-
- if (irq < 0)
- return irq;
-
- cd = kmalloc(sizeof(*cd) + len, GFP_KERNEL);
- if (!cd)
- return -ENOMEM;
-
- snprintf(cd->label, len, "%s cd", dev_name(host->parent));
-
- ret = gpio_request_one(gpio, GPIOF_DIR_IN, cd->label);
- if (ret < 0)
- goto egpioreq;
-
- ret = request_threaded_irq(irq, NULL, mmc_cd_gpio_irqt,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- cd->label, host);
- if (ret < 0)
- goto eirqreq;
-
- cd->gpio = gpio;
- host->hotplug.irq = irq;
- host->hotplug.handler_priv = cd;
-
- return 0;
-
-eirqreq:
- gpio_free(gpio);
-egpioreq:
- kfree(cd);
- return ret;
-}
-EXPORT_SYMBOL(mmc_cd_gpio_request);
-
-void mmc_cd_gpio_free(struct mmc_host *host)
-{
- struct mmc_cd_gpio *cd = host->hotplug.handler_priv;
-
- if (!cd)
- return;
-
- free_irq(host->hotplug.irq, host);
- gpio_free(cd->gpio);
- kfree(cd);
-}
-EXPORT_SYMBOL(mmc_cd_gpio_free);
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 0b6141d..8ac5246 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -404,6 +404,7 @@
{
int err;
u32 status;
+ unsigned long prg_wait;
BUG_ON(!card);
@@ -419,30 +420,38 @@
goto out;
}
- /*
- * If the card status is in PRG-state, we can send the HPI command.
- */
- if (R1_CURRENT_STATE(status) == R1_STATE_PRG) {
- do {
- /*
- * We don't know when the HPI command will finish
- * processing, so we need to resend HPI until out
- * of prg-state, and keep checking the card status
- * with SEND_STATUS. If a timeout error occurs when
- * sending the HPI command, we are already out of
- * prg-state.
- */
- err = mmc_send_hpi_cmd(card, &status);
- if (err)
- pr_debug("%s: abort HPI (%d error)\n",
- mmc_hostname(card->host), err);
+ switch (R1_CURRENT_STATE(status)) {
+ case R1_STATE_IDLE:
+ case R1_STATE_READY:
+ case R1_STATE_STBY:
+ /*
+ * In idle states, HPI is not needed and the caller
+ * can issue the next intended command immediately
+ */
+ goto out;
+ case R1_STATE_PRG:
+ break;
+ default:
+ /* In all other states, it's illegal to issue HPI */
+ pr_debug("%s: HPI cannot be sent. Card state=%d\n",
+ mmc_hostname(card->host), R1_CURRENT_STATE(status));
+ err = -EINVAL;
+ goto out;
+ }
- err = mmc_send_status(card, &status);
- if (err)
- break;
- } while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
- } else
- pr_debug("%s: Left prg-state\n", mmc_hostname(card->host));
+ err = mmc_send_hpi_cmd(card, &status);
+ if (err)
+ goto out;
+
+ prg_wait = jiffies + msecs_to_jiffies(card->ext_csd.out_of_int_time);
+ do {
+ err = mmc_send_status(card, &status);
+
+ if (!err && R1_CURRENT_STATE(status) == R1_STATE_TRAN)
+ break;
+ if (time_after(jiffies, prg_wait))
+ err = -ETIMEDOUT;
+ } while (!err);
out:
mmc_release_host(card->host);
@@ -941,7 +950,7 @@
return result;
}
-EXPORT_SYMBOL(mmc_regulator_get_ocrmask);
+EXPORT_SYMBOL_GPL(mmc_regulator_get_ocrmask);
/**
* mmc_regulator_set_ocr - set regulator to match host->ios voltage
@@ -1011,7 +1020,30 @@
"could not set regulator OCR (%d)\n", result);
return result;
}
-EXPORT_SYMBOL(mmc_regulator_set_ocr);
+EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr);
+
+int mmc_regulator_get_supply(struct mmc_host *mmc)
+{
+ struct device *dev = mmc_dev(mmc);
+ struct regulator *supply;
+ int ret;
+
+ supply = devm_regulator_get(dev, "vmmc");
+ mmc->supply.vmmc = supply;
+ mmc->supply.vqmmc = devm_regulator_get(dev, "vqmmc");
+
+ if (IS_ERR(supply))
+ return PTR_ERR(supply);
+
+ ret = mmc_regulator_get_ocrmask(supply);
+ if (ret > 0)
+ mmc->ocr_avail = ret;
+ else
+ dev_warn(mmc_dev(mmc), "Failed getting OCR mask: %d\n", ret);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mmc_regulator_get_supply);
#endif /* CONFIG_REGULATOR */
@@ -1180,6 +1212,9 @@
host->ios.timing = MMC_TIMING_LEGACY;
mmc_set_ios(host);
+ /* Set signal voltage to 3.3V */
+ mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, false);
+
/*
* This delay should be sufficient to allow the power supply
* to reach the minimum voltage.
@@ -1931,9 +1966,6 @@
*/
mmc_hw_reset_for_init(host);
- /* Initialization should be done at 3.3 V I/O voltage. */
- mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
-
/*
* sdio_reset sends CMD52 to reset card. Since we do not know
* if the card is being re-initialized, just send it. CMD52
@@ -2075,6 +2107,7 @@
void mmc_start_host(struct mmc_host *host)
{
host->f_init = max(freqs[0], host->f_min);
+ host->rescan_disable = 0;
mmc_power_up(host);
mmc_detect_change(host, 0);
}
@@ -2088,6 +2121,7 @@
spin_unlock_irqrestore(&host->lock, flags);
#endif
+ host->rescan_disable = 1;
cancel_delayed_work_sync(&host->detect);
mmc_flush_scheduled_work();
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 91c84c7..597f189 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -32,6 +32,7 @@
static void mmc_host_classdev_release(struct device *dev)
{
struct mmc_host *host = cls_dev_to_mmc_host(dev);
+ mutex_destroy(&host->slot.lock);
kfree(host);
}
@@ -312,6 +313,8 @@
if (!host)
return NULL;
+ /* scanning will be enabled when we're ready */
+ host->rescan_disable = 1;
spin_lock(&mmc_host_lock);
err = idr_get_new(&mmc_host_idr, host, &host->index);
spin_unlock(&mmc_host_lock);
@@ -327,6 +330,9 @@
mmc_host_clk_init(host);
+ mutex_init(&host->slot.lock);
+ host->slot.cd_irq = -EINVAL;
+
spin_lock_init(&host->lock);
init_waitqueue_head(&host->wq);
INIT_DELAYED_WORK(&host->detect, mmc_rescan);
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 2d4a4b7..396b258 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -717,10 +717,6 @@
card->ext_csd.generic_cmd6_time);
}
- if (err)
- pr_err("%s: power class selection for ext_csd_bus_width %d"
- " failed\n", mmc_hostname(card->host), bus_width);
-
return err;
}
@@ -822,9 +818,6 @@
if (!mmc_host_is_spi(host))
mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN);
- /* Initialization should be done at 3.3 V I/O voltage. */
- mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
-
/*
* Since we're changing the OCR value, we seem to
* need to tell some cards to go back to the idle
@@ -1104,7 +1097,9 @@
EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4;
err = mmc_select_powerclass(card, ext_csd_bits, ext_csd);
if (err)
- goto err;
+ pr_warning("%s: power class selection to bus width %d"
+ " failed\n", mmc_hostname(card->host),
+ 1 << bus_width);
}
/*
@@ -1136,7 +1131,10 @@
err = mmc_select_powerclass(card, ext_csd_bits[idx][0],
ext_csd);
if (err)
- goto err;
+ pr_warning("%s: power class selection to "
+ "bus width %d failed\n",
+ mmc_hostname(card->host),
+ 1 << bus_width);
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
@@ -1164,7 +1162,10 @@
err = mmc_select_powerclass(card, ext_csd_bits[idx][1],
ext_csd);
if (err)
- goto err;
+ pr_warning("%s: power class selection to "
+ "bus width %d ddr %d failed\n",
+ mmc_hostname(card->host),
+ 1 << bus_width, ddr);
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
@@ -1326,7 +1327,7 @@
if (!err)
mmc_card_set_sleep(host->card);
} else if (!mmc_host_is_spi(host))
- mmc_deselect_cards(host);
+ err = mmc_deselect_cards(host);
host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
mmc_release_host(host);
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 69370f4..0ed2cc5 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -569,7 +569,6 @@
cmd.opcode = opcode;
cmd.arg = card->rca << 16 | 1;
- cmd.cmd_timeout_ms = card->ext_csd.out_of_int_time;
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err) {
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index c272c686..74972c2 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -244,7 +244,7 @@
* bitfield positions accordingly.
*/
au = UNSTUFF_BITS(ssr, 428 - 384, 4);
- if (au > 0 || au <= 9) {
+ if (au > 0 && au <= 9) {
card->ssr.au = 1 << (au + 4);
es = UNSTUFF_BITS(ssr, 408 - 384, 16);
et = UNSTUFF_BITS(ssr, 402 - 384, 6);
@@ -290,8 +290,12 @@
return -ENOMEM;
}
- /* Find out the supported Bus Speed Modes. */
- err = mmc_sd_switch(card, 0, 0, 1, status);
+ /*
+ * Find out the card's support bits with a mode 0 operation.
+ * The argument does not matter, as the support bits do not
+ * change with the arguments.
+ */
+ err = mmc_sd_switch(card, 0, 0, 0, status);
if (err) {
/*
* If the host or the card can't do the switch,
@@ -312,46 +316,8 @@
if (card->scr.sda_spec3) {
card->sw_caps.sd3_bus_mode = status[13];
-
- /* Find out Driver Strengths supported by the card */
- err = mmc_sd_switch(card, 0, 2, 1, status);
- if (err) {
- /*
- * If the host or the card can't do the switch,
- * fail more gracefully.
- */
- if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
- goto out;
-
- pr_warning("%s: problem reading "
- "Driver Strength.\n",
- mmc_hostname(card->host));
- err = 0;
-
- goto out;
- }
-
+ /* Driver Strengths supported by the card */
card->sw_caps.sd3_drv_type = status[9];
-
- /* Find out Current Limits supported by the card */
- err = mmc_sd_switch(card, 0, 3, 1, status);
- if (err) {
- /*
- * If the host or the card can't do the switch,
- * fail more gracefully.
- */
- if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
- goto out;
-
- pr_warning("%s: problem reading "
- "Current Limit.\n",
- mmc_hostname(card->host));
- err = 0;
-
- goto out;
- }
-
- card->sw_caps.sd3_curr_limit = status[7];
}
out:
@@ -551,60 +517,80 @@
return 0;
}
+/* Get host's max current setting at its current voltage */
+static u32 sd_get_host_max_current(struct mmc_host *host)
+{
+ u32 voltage, max_current;
+
+ voltage = 1 << host->ios.vdd;
+ switch (voltage) {
+ case MMC_VDD_165_195:
+ max_current = host->max_current_180;
+ break;
+ case MMC_VDD_29_30:
+ case MMC_VDD_30_31:
+ max_current = host->max_current_300;
+ break;
+ case MMC_VDD_32_33:
+ case MMC_VDD_33_34:
+ max_current = host->max_current_330;
+ break;
+ default:
+ max_current = 0;
+ }
+
+ return max_current;
+}
+
static int sd_set_current_limit(struct mmc_card *card, u8 *status)
{
- int current_limit = 0;
+ int current_limit = SD_SET_CURRENT_NO_CHANGE;
int err;
+ u32 max_current;
/*
* Current limit switch is only defined for SDR50, SDR104, and DDR50
- * bus speed modes. For other bus speed modes, we set the default
- * current limit of 200mA.
+ * bus speed modes. For other bus speed modes, we do not change the
+ * current limit.
*/
- if ((card->sd_bus_speed == UHS_SDR50_BUS_SPEED) ||
- (card->sd_bus_speed == UHS_SDR104_BUS_SPEED) ||
- (card->sd_bus_speed == UHS_DDR50_BUS_SPEED)) {
- if (card->host->caps & MMC_CAP_MAX_CURRENT_800) {
- if (card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_800)
- current_limit = SD_SET_CURRENT_LIMIT_800;
- else if (card->sw_caps.sd3_curr_limit &
- SD_MAX_CURRENT_600)
- current_limit = SD_SET_CURRENT_LIMIT_600;
- else if (card->sw_caps.sd3_curr_limit &
- SD_MAX_CURRENT_400)
- current_limit = SD_SET_CURRENT_LIMIT_400;
- else if (card->sw_caps.sd3_curr_limit &
- SD_MAX_CURRENT_200)
- current_limit = SD_SET_CURRENT_LIMIT_200;
- } else if (card->host->caps & MMC_CAP_MAX_CURRENT_600) {
- if (card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_600)
- current_limit = SD_SET_CURRENT_LIMIT_600;
- else if (card->sw_caps.sd3_curr_limit &
- SD_MAX_CURRENT_400)
- current_limit = SD_SET_CURRENT_LIMIT_400;
- else if (card->sw_caps.sd3_curr_limit &
- SD_MAX_CURRENT_200)
- current_limit = SD_SET_CURRENT_LIMIT_200;
- } else if (card->host->caps & MMC_CAP_MAX_CURRENT_400) {
- if (card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_400)
- current_limit = SD_SET_CURRENT_LIMIT_400;
- else if (card->sw_caps.sd3_curr_limit &
- SD_MAX_CURRENT_200)
- current_limit = SD_SET_CURRENT_LIMIT_200;
- } else if (card->host->caps & MMC_CAP_MAX_CURRENT_200) {
- if (card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_200)
- current_limit = SD_SET_CURRENT_LIMIT_200;
- }
- } else
+ if ((card->sd_bus_speed != UHS_SDR50_BUS_SPEED) &&
+ (card->sd_bus_speed != UHS_SDR104_BUS_SPEED) &&
+ (card->sd_bus_speed != UHS_DDR50_BUS_SPEED))
+ return 0;
+
+ /*
+ * Host has different current capabilities when operating at
+ * different voltages, so find out its max current first.
+ */
+ max_current = sd_get_host_max_current(card->host);
+
+ /*
+ * We only check host's capability here, if we set a limit that is
+ * higher than the card's maximum current, the card will be using its
+ * maximum current, e.g. if the card's maximum current is 300ma, and
+ * when we set current limit to 200ma, the card will draw 200ma, and
+ * when we set current limit to 400/600/800ma, the card will draw its
+ * maximum 300ma from the host.
+ */
+ if (max_current >= 800)
+ current_limit = SD_SET_CURRENT_LIMIT_800;
+ else if (max_current >= 600)
+ current_limit = SD_SET_CURRENT_LIMIT_600;
+ else if (max_current >= 400)
+ current_limit = SD_SET_CURRENT_LIMIT_400;
+ else if (max_current >= 200)
current_limit = SD_SET_CURRENT_LIMIT_200;
- err = mmc_sd_switch(card, 1, 3, current_limit, status);
- if (err)
- return err;
+ if (current_limit != SD_SET_CURRENT_NO_CHANGE) {
+ err = mmc_sd_switch(card, 1, 3, current_limit, status);
+ if (err)
+ return err;
- if (((status[15] >> 4) & 0x0F) != current_limit)
- pr_warning("%s: Problem setting current limit!\n",
- mmc_hostname(card->host));
+ if (((status[15] >> 4) & 0x0F) != current_limit)
+ pr_warning("%s: Problem setting current limit!\n",
+ mmc_hostname(card->host));
+
+ }
return 0;
}
@@ -726,6 +712,7 @@
int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
{
int err;
+ u32 max_current;
/*
* Since we're changing the OCR value, we seem to
@@ -753,9 +740,12 @@
MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50))
ocr |= SD_OCR_S18R;
- /* If the host can supply more than 150mA, XPC should be set to 1. */
- if (host->caps & (MMC_CAP_SET_XPC_330 | MMC_CAP_SET_XPC_300 |
- MMC_CAP_SET_XPC_180))
+ /*
+ * If the host can supply more than 150mA at current voltage,
+ * XPC should be set to 1.
+ */
+ max_current = sd_get_host_max_current(host);
+ if (max_current > 150)
ocr |= SD_OCR_XPC;
try_again:
@@ -911,9 +901,6 @@
BUG_ON(!host);
WARN_ON(!host->claimed);
- /* The initialization should be done at 3.3 V I/O voltage. */
- mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
-
err = mmc_sd_get_cid(host, ocr, cid, &rocr);
if (err)
return err;
@@ -1075,16 +1062,18 @@
*/
static int mmc_sd_suspend(struct mmc_host *host)
{
+ int err = 0;
+
BUG_ON(!host);
BUG_ON(!host->card);
mmc_claim_host(host);
if (!mmc_host_is_spi(host))
- mmc_deselect_cards(host);
+ err = mmc_deselect_cards(host);
host->card->state &= ~MMC_STATE_HIGHSPEED;
mmc_release_host(host);
- return 0;
+ return err;
}
/*
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 13d0e95..d4619e2 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -218,6 +218,12 @@
if (ret)
return ret;
+ if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED)
+ pr_warning("%s: SDIO_CCCR_IF is invalid: 0x%02x\n",
+ mmc_hostname(card->host), ctrl);
+
+ /* set as 4-bit bus width */
+ ctrl &= ~SDIO_BUS_WIDTH_MASK;
ctrl |= SDIO_BUS_WIDTH_4BIT;
ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
@@ -585,9 +591,6 @@
* Inform the card of the voltage
*/
if (!powered_resume) {
- /* The initialization should be done at 3.3 V I/O voltage. */
- mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
-
err = mmc_send_io_op_cond(host, host->ocr, &ocr);
if (err)
goto err;
@@ -1000,10 +1003,6 @@
* restore the correct voltage setting of the card.
*/
- /* The initialization should be done at 3.3 V I/O voltage. */
- if (!mmc_card_keep_power(host))
- mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
-
sdio_reset(host);
mmc_go_idle(host);
mmc_send_if_cond(host, host->ocr_avail);
diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c
index f1c7ed8..8e94e55 100644
--- a/drivers/mmc/core/sdio_cis.c
+++ b/drivers/mmc/core/sdio_cis.c
@@ -313,7 +313,7 @@
if (ret == -ENOENT) {
/* warn about unknown tuples */
- pr_warning("%s: queuing unknown"
+ pr_warn_ratelimited("%s: queuing unknown"
" CIS tuple 0x%02x (%u bytes)\n",
mmc_hostname(card->host),
tpl_code, tpl_link);
diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c
new file mode 100644
index 0000000..0582429
--- /dev/null
+++ b/drivers/mmc/core/slot-gpio.c
@@ -0,0 +1,188 @@
+/*
+ * Generic GPIO card-detect helper
+ *
+ * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+struct mmc_gpio {
+ int ro_gpio;
+ int cd_gpio;
+ char *ro_label;
+ char cd_label[0];
+};
+
+static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id)
+{
+ /* Schedule a card detection after a debounce timeout */
+ mmc_detect_change(dev_id, msecs_to_jiffies(100));
+ return IRQ_HANDLED;
+}
+
+static int mmc_gpio_alloc(struct mmc_host *host)
+{
+ size_t len = strlen(dev_name(host->parent)) + 4;
+ struct mmc_gpio *ctx;
+
+ mutex_lock(&host->slot.lock);
+
+ ctx = host->slot.handler_priv;
+ if (!ctx) {
+ /*
+ * devm_kzalloc() can be called after device_initialize(), even
+ * before device_add(), i.e., between mmc_alloc_host() and
+ * mmc_add_host()
+ */
+ ctx = devm_kzalloc(&host->class_dev, sizeof(*ctx) + 2 * len,
+ GFP_KERNEL);
+ if (ctx) {
+ ctx->ro_label = ctx->cd_label + len;
+ snprintf(ctx->cd_label, len, "%s cd", dev_name(host->parent));
+ snprintf(ctx->ro_label, len, "%s ro", dev_name(host->parent));
+ ctx->cd_gpio = -EINVAL;
+ ctx->ro_gpio = -EINVAL;
+ host->slot.handler_priv = ctx;
+ }
+ }
+
+ mutex_unlock(&host->slot.lock);
+
+ return ctx ? 0 : -ENOMEM;
+}
+
+int mmc_gpio_get_ro(struct mmc_host *host)
+{
+ struct mmc_gpio *ctx = host->slot.handler_priv;
+
+ if (!ctx || !gpio_is_valid(ctx->ro_gpio))
+ return -ENOSYS;
+
+ return !gpio_get_value_cansleep(ctx->ro_gpio) ^
+ !!(host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH);
+}
+EXPORT_SYMBOL(mmc_gpio_get_ro);
+
+int mmc_gpio_get_cd(struct mmc_host *host)
+{
+ struct mmc_gpio *ctx = host->slot.handler_priv;
+
+ if (!ctx || !gpio_is_valid(ctx->cd_gpio))
+ return -ENOSYS;
+
+ return !gpio_get_value_cansleep(ctx->cd_gpio) ^
+ !!(host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH);
+}
+EXPORT_SYMBOL(mmc_gpio_get_cd);
+
+int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio)
+{
+ struct mmc_gpio *ctx;
+ int ret;
+
+ if (!gpio_is_valid(gpio))
+ return -EINVAL;
+
+ ret = mmc_gpio_alloc(host);
+ if (ret < 0)
+ return ret;
+
+ ctx = host->slot.handler_priv;
+
+ return gpio_request_one(gpio, GPIOF_DIR_IN, ctx->ro_label);
+}
+EXPORT_SYMBOL(mmc_gpio_request_ro);
+
+int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio)
+{
+ struct mmc_gpio *ctx;
+ int irq = gpio_to_irq(gpio);
+ int ret;
+
+ ret = mmc_gpio_alloc(host);
+ if (ret < 0)
+ return ret;
+
+ ctx = host->slot.handler_priv;
+
+ ret = gpio_request_one(gpio, GPIOF_DIR_IN, ctx->cd_label);
+ if (ret < 0)
+ /*
+ * don't bother freeing memory. It might still get used by other
+ * slot functions, in any case it will be freed, when the device
+ * is destroyed.
+ */
+ return ret;
+
+ /*
+ * Even if gpio_to_irq() returns a valid IRQ number, the platform might
+ * still prefer to poll, e.g., because that IRQ number is already used
+ * by another unit and cannot be shared.
+ */
+ if (irq >= 0 && host->caps & MMC_CAP_NEEDS_POLL)
+ irq = -EINVAL;
+
+ if (irq >= 0) {
+ ret = request_threaded_irq(irq, NULL, mmc_gpio_cd_irqt,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ ctx->cd_label, host);
+ if (ret < 0)
+ irq = ret;
+ }
+
+ host->slot.cd_irq = irq;
+
+ if (irq < 0)
+ host->caps |= MMC_CAP_NEEDS_POLL;
+
+ ctx->cd_gpio = gpio;
+
+ return 0;
+}
+EXPORT_SYMBOL(mmc_gpio_request_cd);
+
+void mmc_gpio_free_ro(struct mmc_host *host)
+{
+ struct mmc_gpio *ctx = host->slot.handler_priv;
+ int gpio;
+
+ if (!ctx || !gpio_is_valid(ctx->ro_gpio))
+ return;
+
+ gpio = ctx->ro_gpio;
+ ctx->ro_gpio = -EINVAL;
+
+ gpio_free(gpio);
+}
+EXPORT_SYMBOL(mmc_gpio_free_ro);
+
+void mmc_gpio_free_cd(struct mmc_host *host)
+{
+ struct mmc_gpio *ctx = host->slot.handler_priv;
+ int gpio;
+
+ if (!ctx || !gpio_is_valid(ctx->cd_gpio))
+ return;
+
+ if (host->slot.cd_irq >= 0) {
+ free_irq(host->slot.cd_irq, host);
+ host->slot.cd_irq = -EINVAL;
+ }
+
+ gpio = ctx->cd_gpio;
+ ctx->cd_gpio = -EINVAL;
+
+ gpio_free(gpio);
+}
+EXPORT_SYMBOL(mmc_gpio_free_cd);
diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
index 787aba1..ab56f7d 100644
--- a/drivers/mmc/host/atmel-mci-regs.h
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -140,4 +140,18 @@
#define atmci_writel(port,reg,value) \
__raw_writel((value), (port)->regs + reg)
+/*
+ * Fix sconfig's burst size according to atmel MCI. We need to convert them as:
+ * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
+ *
+ * This can be done by finding most significant bit set.
+ */
+static inline unsigned int atmci_convert_chksize(unsigned int maxburst)
+{
+ if (maxburst > 1)
+ return fls(maxburst) - 2;
+ else
+ return 0;
+}
+
#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 420aca6..322412c 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -391,11 +391,17 @@
clk_disable(host->mck);
spin_unlock_bh(&host->lock);
- seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
+ seq_printf(s, "MR:\t0x%08x%s%s ",
buf[ATMCI_MR / 4],
buf[ATMCI_MR / 4] & ATMCI_MR_RDPROOF ? " RDPROOF" : "",
- buf[ATMCI_MR / 4] & ATMCI_MR_WRPROOF ? " WRPROOF" : "",
- buf[ATMCI_MR / 4] & 0xff);
+ buf[ATMCI_MR / 4] & ATMCI_MR_WRPROOF ? " WRPROOF" : "");
+ if (host->caps.has_odd_clk_div)
+ seq_printf(s, "{CLKDIV,CLKODD}=%u\n",
+ ((buf[ATMCI_MR / 4] & 0xff) << 1)
+ | ((buf[ATMCI_MR / 4] >> 16) & 1));
+ else
+ seq_printf(s, "CLKDIV=%u\n",
+ (buf[ATMCI_MR / 4] & 0xff));
seq_printf(s, "DTOR:\t0x%08x\n", buf[ATMCI_DTOR / 4]);
seq_printf(s, "SDCR:\t0x%08x\n", buf[ATMCI_SDCR / 4]);
seq_printf(s, "ARGR:\t0x%08x\n", buf[ATMCI_ARGR / 4]);
@@ -910,6 +916,7 @@
enum dma_data_direction direction;
enum dma_transfer_direction slave_dirn;
unsigned int sglen;
+ u32 maxburst;
u32 iflags;
data->error = -EINPROGRESS;
@@ -943,17 +950,18 @@
if (!chan)
return -ENODEV;
- if (host->caps.has_dma)
- atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(3) | ATMCI_DMAEN);
-
if (data->flags & MMC_DATA_READ) {
direction = DMA_FROM_DEVICE;
host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM;
+ maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst);
} else {
direction = DMA_TO_DEVICE;
host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV;
+ maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst);
}
+ atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) | ATMCI_DMAEN);
+
sglen = dma_map_sg(chan->device->dev, data->sg,
data->sg_len, direction);
@@ -1683,7 +1691,6 @@
dev_dbg(&host->pdev->dev, "FSM: cmd ready\n");
host->cmd = NULL;
- host->data = NULL;
data->bytes_xfered = data->blocks * data->blksz;
data->error = 0;
atmci_command_complete(host, mrq->stop);
@@ -1697,6 +1704,7 @@
atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
state = STATE_WAITING_NOTBUSY;
}
+ host->data = NULL;
break;
case STATE_END_REQUEST:
@@ -2314,6 +2322,8 @@
platform_set_drvdata(pdev, host);
+ setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
+
/* We need at least one slot to succeed */
nr_slots = 0;
ret = -ENODEV;
@@ -2352,8 +2362,6 @@
}
}
- setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
-
dev_info(&pdev->dev,
"Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
host->mapbase, irq, nr_slots);
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 9bbf45f..72dc3cd 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -405,11 +405,23 @@
static int dw_mci_idmac_init(struct dw_mci *host)
{
struct idmac_desc *p;
- int i;
+ int i, dma_support;
/* Number of descriptors in the ring buffer */
host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
+ /* Check if Hardware Configuration Register has support for DMA */
+ dma_support = (mci_readl(host, HCON) >> 16) & 0x3;
+
+ if (!dma_support || dma_support > 2) {
+ dev_err(&host->dev,
+ "Host Controller does not support IDMA Tx.\n");
+ host->dma_ops = NULL;
+ return -ENODEV;
+ }
+
+ dev_info(&host->dev, "Using internal DMA controller.\n");
+
/* Forward link the descriptor list */
for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++)
p->des3 = host->sg_dma + (sizeof(struct idmac_desc) * (i + 1));
@@ -418,6 +430,8 @@
p->des3 = host->sg_dma;
p->des0 = IDMAC_DES0_ER;
+ mci_writel(host, BMOD, SDMMC_IDMAC_SWRESET);
+
/* Mask out interrupts - get Tx & Rx complete only */
mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI |
SDMMC_IDMAC_INT_TI);
@@ -615,14 +629,15 @@
u32 div;
if (slot->clock != host->current_speed) {
- if (host->bus_hz % slot->clock)
+ div = host->bus_hz / slot->clock;
+ if (host->bus_hz % slot->clock && host->bus_hz > slot->clock)
/*
* move the + 1 after the divide to prevent
* over-clocking the card.
*/
- div = ((host->bus_hz / slot->clock) >> 1) + 1;
- else
- div = (host->bus_hz / slot->clock) >> 1;
+ div += 1;
+
+ div = (host->bus_hz != slot->clock) ? DIV_ROUND_UP(div, 2) : 0;
dev_info(&slot->mmc->class_dev,
"Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ"
@@ -939,8 +954,8 @@
mdelay(20);
if (cmd->data) {
- host->data = NULL;
dw_mci_stop_dma(host);
+ host->data = NULL;
}
}
}
@@ -1623,7 +1638,6 @@
if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI);
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
- set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
host->dma_ops->complete(host);
}
#endif
@@ -1725,7 +1739,8 @@
#ifdef CONFIG_MMC_DW_IDMAC
ctrl = mci_readl(host, BMOD);
- ctrl |= 0x01; /* Software reset of DMA */
+ /* Software reset of DMA */
+ ctrl |= SDMMC_IDMAC_SWRESET;
mci_writel(host, BMOD, ctrl);
#endif
@@ -1873,7 +1888,6 @@
/* Determine which DMA interface to use */
#ifdef CONFIG_MMC_DW_IDMAC
host->dma_ops = &dw_mci_idmac_ops;
- dev_info(&host->dev, "Using internal DMA controller.\n");
#endif
if (!host->dma_ops)
@@ -1950,10 +1964,6 @@
spin_lock_init(&host->lock);
INIT_LIST_HEAD(&host->queue);
-
- host->dma_ops = host->pdata->dma_ops;
- dw_mci_init_dma(host);
-
/*
* Get the host data width - this assumes that HCON has been set with
* the correct values.
@@ -1981,10 +1991,11 @@
}
/* Reset all blocks */
- if (!mci_wait_reset(&host->dev, host)) {
- ret = -ENODEV;
- goto err_dmaunmap;
- }
+ if (!mci_wait_reset(&host->dev, host))
+ return -ENODEV;
+
+ host->dma_ops = host->pdata->dma_ops;
+ dw_mci_init_dma(host);
/* Clear the interrupts for the host controller */
mci_writel(host, RINTSTS, 0xFFFFFFFF);
@@ -2170,14 +2181,14 @@
if (host->vmmc)
regulator_enable(host->vmmc);
- if (host->dma_ops->init)
- host->dma_ops->init(host);
-
if (!mci_wait_reset(&host->dev, host)) {
ret = -ENODEV;
return ret;
}
+ if (host->use_dma && host->dma_ops->init)
+ host->dma_ops->init(host);
+
/* Restore the old value at FIFOTH register */
mci_writel(host, FIFOTH, host->fifoth_val);
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index f0fcce4..50ff19a 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1216,12 +1216,7 @@
int bus_width = 0;
pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0);
- if (!pdata->gpio_wp)
- pdata->gpio_wp = -1;
-
pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0);
- if (!pdata->gpio_cd)
- pdata->gpio_cd = -1;
if (of_get_property(np, "cd-inverted", NULL))
pdata->cd_invert = true;
@@ -1276,6 +1271,12 @@
return -EINVAL;
}
+ if (!plat) {
+ plat = devm_kzalloc(&dev->dev, sizeof(*plat), GFP_KERNEL);
+ if (!plat)
+ return -ENOMEM;
+ }
+
if (np)
mmci_dt_populate_generic_pdata(np, plat);
@@ -1424,6 +1425,10 @@
writel(0, host->base + MMCIMASK1);
writel(0xfff, host->base + MMCICLEAR);
+ if (plat->gpio_cd == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err_gpio_cd;
+ }
if (gpio_is_valid(plat->gpio_cd)) {
ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
if (ret == 0)
@@ -1447,6 +1452,10 @@
if (ret >= 0)
host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd);
}
+ if (plat->gpio_wp == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err_gpio_wp;
+ }
if (gpio_is_valid(plat->gpio_wp)) {
ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)");
if (ret == 0)
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 34a9026..a51f930 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -164,16 +164,23 @@
spinlock_t lock;
int sdio_irq_en;
int wp_gpio;
+ bool wp_inverted;
};
static int mxs_mmc_get_ro(struct mmc_host *mmc)
{
struct mxs_mmc_host *host = mmc_priv(mmc);
+ int ret;
if (!gpio_is_valid(host->wp_gpio))
return -EINVAL;
- return gpio_get_value(host->wp_gpio);
+ ret = gpio_get_value(host->wp_gpio);
+
+ if (host->wp_inverted)
+ ret = !ret;
+
+ return ret;
}
static int mxs_mmc_get_cd(struct mmc_host *mmc)
@@ -707,6 +714,8 @@
struct pinctrl *pinctrl;
int ret = 0, irq_err, irq_dma;
dma_cap_mask_t mask;
+ struct regulator *reg_vmmc;
+ enum of_gpio_flags flags;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
@@ -747,6 +756,16 @@
host->mmc = mmc;
host->sdio_irq_en = 0;
+ reg_vmmc = devm_regulator_get(&pdev->dev, "vmmc");
+ if (!IS_ERR(reg_vmmc)) {
+ ret = regulator_enable(reg_vmmc);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to enable vmmc regulator: %d\n", ret);
+ goto out_mmc_free;
+ }
+ }
+
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl)) {
ret = PTR_ERR(pinctrl);
@@ -785,7 +804,10 @@
mmc->caps |= MMC_CAP_4_BIT_DATA;
else if (bus_width == 8)
mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
- host->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
+ host->wp_gpio = of_get_named_gpio_flags(np, "wp-gpios", 0,
+ &flags);
+ if (flags & OF_GPIO_ACTIVE_LOW)
+ host->wp_inverted = 1;
} else {
if (pdata->flags & SLOTF_8_BIT_CAPABLE)
mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
@@ -894,8 +916,8 @@
.owner = THIS_MODULE,
#ifdef CONFIG_PM
.pm = &mxs_mmc_pm_ops,
- .of_match_table = mxs_mmc_dt_ids,
#endif
+ .of_match_table = mxs_mmc_dt_ids,
},
};
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 552196c..3e8dcf8 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1300,7 +1300,7 @@
.set_ios = mmc_omap_set_ios,
};
-static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id)
+static int __devinit mmc_omap_new_slot(struct mmc_omap_host *host, int id)
{
struct mmc_omap_slot *slot = NULL;
struct mmc_host *mmc;
@@ -1485,24 +1485,26 @@
}
host->nr_slots = pdata->nr_slots;
- for (i = 0; i < pdata->nr_slots; i++) {
- ret = mmc_omap_new_slot(host, i);
- if (ret < 0) {
- while (--i >= 0)
- mmc_omap_remove_slot(host->slots[i]);
-
- goto err_plat_cleanup;
- }
- }
-
host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
if (!host->mmc_omap_wq)
goto err_plat_cleanup;
+ for (i = 0; i < pdata->nr_slots; i++) {
+ ret = mmc_omap_new_slot(host, i);
+ if (ret < 0) {
+ while (--i >= 0)
+ mmc_omap_remove_slot(host->slots[i]);
+
+ goto err_destroy_wq;
+ }
+ }
+
return 0;
+err_destroy_wq:
+ destroy_workqueue(host->mmc_omap_wq);
err_plat_cleanup:
if (pdata->cleanup)
pdata->cleanup(&pdev->dev);
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 9a7a60a..bc28627 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -85,7 +85,6 @@
#define BRR_ENABLE (1 << 5)
#define DTO_ENABLE (1 << 20)
#define INIT_STREAM (1 << 1)
-#define ACEN_ACMD12 (1 << 2)
#define DP_SELECT (1 << 21)
#define DDIR (1 << 4)
#define DMA_EN 0x1
@@ -117,7 +116,6 @@
#define OMAP_MMC_MAX_CLOCK 52000000
#define DRIVER_NAME "omap_hsmmc"
-#define AUTO_CMD12 (1 << 0) /* Auto CMD12 support */
/*
* One controller can have multiple slots, like on some omap boards using
* omap.c controller driver. Luckily this is not currently done on any known
@@ -177,7 +175,6 @@
int reqs_blocked;
int use_reg;
int req_in_progress;
- unsigned int flags;
struct omap_hsmmc_next next_data;
struct omap_mmc_platform_data *pdata;
@@ -773,8 +770,6 @@
cmdtype = 0x3;
cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
- if ((host->flags & AUTO_CMD12) && mmc_op_multi(cmd->opcode))
- cmdreg |= ACEN_ACMD12;
if (data) {
cmdreg |= DP_SELECT | MSBS | BCE;
@@ -847,14 +842,11 @@
else
data->bytes_xfered = 0;
- if (data->stop && ((!(host->flags & AUTO_CMD12)) || data->error)) {
- omap_hsmmc_start_command(host, data->stop, NULL);
- } else {
- if (data->stop)
- data->stop->resp[0] = OMAP_HSMMC_READ(host->base,
- RSP76);
+ if (!data->stop) {
omap_hsmmc_request_done(host, data->mrq);
+ return;
}
+ omap_hsmmc_start_command(host, data->stop, NULL);
}
/*
@@ -1097,7 +1089,7 @@
/* Disable the clocks */
pm_runtime_put_sync(host->dev);
if (host->dbclk)
- clk_disable(host->dbclk);
+ clk_disable_unprepare(host->dbclk);
/* Turn the power off */
ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
@@ -1108,7 +1100,7 @@
vdd);
pm_runtime_get_sync(host->dev);
if (host->dbclk)
- clk_enable(host->dbclk);
+ clk_prepare_enable(host->dbclk);
if (ret != 0)
goto err;
@@ -1859,7 +1851,6 @@
host->mapbase = res->start + pdata->reg_offset;
host->base = ioremap(host->mapbase, SZ_4K);
host->power_mode = MMC_POWER_OFF;
- host->flags = AUTO_CMD12;
host->next_data.cookie = 1;
platform_set_drvdata(pdev, host);
@@ -1908,7 +1899,7 @@
if (IS_ERR(host->dbclk)) {
dev_warn(mmc_dev(host->mmc), "Failed to get debounce clk\n");
host->dbclk = NULL;
- } else if (clk_enable(host->dbclk) != 0) {
+ } else if (clk_prepare_enable(host->dbclk) != 0) {
dev_warn(mmc_dev(host->mmc), "Failed to enable debounce clk\n");
clk_put(host->dbclk);
host->dbclk = NULL;
@@ -1940,6 +1931,7 @@
res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
if (!res) {
dev_err(mmc_dev(host->mmc), "cannot get DMA TX channel\n");
+ ret = -ENXIO;
goto err_irq;
}
host->dma_line_tx = res->start;
@@ -1947,6 +1939,7 @@
res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
if (!res) {
dev_err(mmc_dev(host->mmc), "cannot get DMA RX channel\n");
+ ret = -ENXIO;
goto err_irq;
}
host->dma_line_rx = res->start;
@@ -2032,7 +2025,7 @@
pm_runtime_disable(host->dev);
clk_put(host->fclk);
if (host->dbclk) {
- clk_disable(host->dbclk);
+ clk_disable_unprepare(host->dbclk);
clk_put(host->dbclk);
}
err1:
@@ -2067,7 +2060,7 @@
pm_runtime_disable(host->dev);
clk_put(host->fclk);
if (host->dbclk) {
- clk_disable(host->dbclk);
+ clk_disable_unprepare(host->dbclk);
clk_put(host->dbclk);
}
@@ -2125,7 +2118,7 @@
}
if (host->dbclk)
- clk_disable(host->dbclk);
+ clk_disable_unprepare(host->dbclk);
err:
pm_runtime_put_sync(host->dev);
return ret;
@@ -2146,7 +2139,7 @@
pm_runtime_get_sync(host->dev);
if (host->dbclk)
- clk_enable(host->dbclk);
+ clk_prepare_enable(host->dbclk);
if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER))
omap_hsmmc_conf_bus_power(host);
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index c3622a6..bd5a5cc 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -26,7 +26,6 @@
#include <mach/dma.h>
#include <mach/regs-sdi.h>
-#include <mach/regs-gpio.h>
#include <plat/mci.h>
@@ -1237,12 +1236,9 @@
switch (ios->power_mode) {
case MMC_POWER_ON:
case MMC_POWER_UP:
- s3c2410_gpio_cfgpin(S3C2410_GPE(5), S3C2410_GPE5_SDCLK);
- s3c2410_gpio_cfgpin(S3C2410_GPE(6), S3C2410_GPE6_SDCMD);
- s3c2410_gpio_cfgpin(S3C2410_GPE(7), S3C2410_GPE7_SDDAT0);
- s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
- s3c2410_gpio_cfgpin(S3C2410_GPE(9), S3C2410_GPE9_SDDAT2);
- s3c2410_gpio_cfgpin(S3C2410_GPE(10), S3C2410_GPE10_SDDAT3);
+ /* Configure GPE5...GPE10 pins in SD mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
if (host->pdata->set_power)
host->pdata->set_power(ios->power_mode, ios->vdd);
diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c
index 177f697..a6e53a1 100644
--- a/drivers/mmc/host/sdhci-dove.c
+++ b/drivers/mmc/host/sdhci-dove.c
@@ -20,11 +20,17 @@
*/
#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/module.h>
#include <linux/mmc/host.h>
#include "sdhci-pltfm.h"
+struct sdhci_dove_priv {
+ struct clk *clk;
+};
+
static u16 sdhci_dove_readw(struct sdhci_host *host, int reg)
{
u16 ret;
@@ -66,16 +72,57 @@
.quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
SDHCI_QUIRK_NO_BUSY_IRQ |
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
- SDHCI_QUIRK_FORCE_DMA,
+ SDHCI_QUIRK_FORCE_DMA |
+ SDHCI_QUIRK_NO_HISPD_BIT,
};
static int __devinit sdhci_dove_probe(struct platform_device *pdev)
{
- return sdhci_pltfm_register(pdev, &sdhci_dove_pdata);
+ struct sdhci_host *host;
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_dove_priv *priv;
+ int ret;
+
+ ret = sdhci_pltfm_register(pdev, &sdhci_dove_pdata);
+ if (ret)
+ goto sdhci_dove_register_fail;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_dove_priv),
+ GFP_KERNEL);
+ if (!priv) {
+ dev_err(&pdev->dev, "unable to allocate private data");
+ ret = -ENOMEM;
+ goto sdhci_dove_allocate_fail;
+ }
+
+ host = platform_get_drvdata(pdev);
+ pltfm_host = sdhci_priv(host);
+ pltfm_host->priv = priv;
+
+ priv->clk = clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(priv->clk))
+ clk_prepare_enable(priv->clk);
+ return 0;
+
+sdhci_dove_allocate_fail:
+ sdhci_pltfm_unregister(pdev);
+sdhci_dove_register_fail:
+ return ret;
}
static int __devexit sdhci_dove_remove(struct platform_device *pdev)
{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_dove_priv *priv = pltfm_host->priv;
+
+ if (priv->clk) {
+ if (!IS_ERR(priv->clk)) {
+ clk_disable_unprepare(priv->clk);
+ clk_put(priv->clk);
+ }
+ devm_kfree(&pdev->dev, priv->clk);
+ }
return sdhci_pltfm_unregister(pdev);
}
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index ebbe984..e23f813 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -299,6 +299,8 @@
static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_imx_data *imx_data = pltfm_host->priv;
u32 new_val;
switch (reg) {
@@ -315,8 +317,11 @@
SDHCI_CTRL_D3CD);
/* ensure the endianess */
new_val |= ESDHC_HOST_CONTROL_LE;
- /* DMA mode bits are shifted */
- new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
+ /* bits 8&9 are reserved on mx25 */
+ if (!is_imx25_esdhc(imx_data)) {
+ /* DMA mode bits are shifted */
+ new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
+ }
esdhc_clrset_le(host, 0xffff, new_val, reg);
return;
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 69ef0be..504da71 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -157,6 +157,7 @@
static const struct sdhci_pci_fixes sdhci_cafe = {
.quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
SDHCI_QUIRK_NO_BUSY_IRQ |
+ SDHCI_QUIRK_BROKEN_CARD_DETECTION |
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
};
diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
index dbb75bf..b6ee885 100644
--- a/drivers/mmc/host/sdhci-pxav2.c
+++ b/drivers/mmc/host/sdhci-pxav2.c
@@ -28,6 +28,9 @@
#include <linux/mmc/host.h>
#include <linux/platform_data/pxa_sdhci.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
#include "sdhci.h"
#include "sdhci-pltfm.h"
@@ -121,6 +124,48 @@
.platform_8bit_width = pxav2_mmc_set_width,
};
+#ifdef CONFIG_OF
+static const struct of_device_id sdhci_pxav2_of_match[] = {
+ {
+ .compatible = "mrvl,pxav2-mmc",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sdhci_pxav2_of_match);
+
+static struct sdhci_pxa_platdata *pxav2_get_mmc_pdata(struct device *dev)
+{
+ struct sdhci_pxa_platdata *pdata;
+ struct device_node *np = dev->of_node;
+ u32 bus_width;
+ u32 clk_delay_cycles;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ if (of_find_property(np, "non-removable", NULL))
+ pdata->flags |= PXA_FLAG_CARD_PERMANENT;
+
+ of_property_read_u32(np, "bus-width", &bus_width);
+ if (bus_width == 8)
+ pdata->flags |= PXA_FLAG_SD_8_BIT_CAPABLE_SLOT;
+
+ of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles);
+ if (clk_delay_cycles > 0) {
+ pdata->clk_delay_sel = 1;
+ pdata->clk_delay_cycles = clk_delay_cycles;
+ }
+
+ return pdata;
+}
+#else
+static inline struct sdhci_pxa_platdata *pxav2_get_mmc_pdata(struct device *dev)
+{
+ return NULL;
+}
+#endif
+
static int __devinit sdhci_pxav2_probe(struct platform_device *pdev)
{
struct sdhci_pltfm_host *pltfm_host;
@@ -128,6 +173,8 @@
struct device *dev = &pdev->dev;
struct sdhci_host *host = NULL;
struct sdhci_pxa *pxa = NULL;
+ const struct of_device_id *match;
+
int ret;
struct clk *clk;
@@ -156,6 +203,10 @@
| SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
+ match = of_match_device(of_match_ptr(sdhci_pxav2_of_match), &pdev->dev);
+ if (match) {
+ pdata = pxav2_get_mmc_pdata(dev);
+ }
if (pdata) {
if (pdata->flags & PXA_FLAG_CARD_PERMANENT) {
/* on-chip device */
@@ -218,6 +269,9 @@
.driver = {
.name = "sdhci-pxav2",
.owner = THIS_MODULE,
+#ifdef CONFIG_OF
+ .of_match_table = sdhci_pxav2_of_match,
+#endif
.pm = SDHCI_PLTFM_PMOPS,
},
.probe = sdhci_pxav2_probe,
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index f296956..07fe383 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -28,6 +28,9 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
#include "sdhci.h"
#include "sdhci-pltfm.h"
@@ -164,6 +167,46 @@
.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
};
+#ifdef CONFIG_OF
+static const struct of_device_id sdhci_pxav3_of_match[] = {
+ {
+ .compatible = "mrvl,pxav3-mmc",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sdhci_pxav3_of_match);
+
+static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
+{
+ struct sdhci_pxa_platdata *pdata;
+ struct device_node *np = dev->of_node;
+ u32 bus_width;
+ u32 clk_delay_cycles;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ if (of_find_property(np, "non-removable", NULL))
+ pdata->flags |= PXA_FLAG_CARD_PERMANENT;
+
+ of_property_read_u32(np, "bus-width", &bus_width);
+ if (bus_width == 8)
+ pdata->flags |= PXA_FLAG_SD_8_BIT_CAPABLE_SLOT;
+
+ of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles);
+ if (clk_delay_cycles > 0)
+ pdata->clk_delay_cycles = clk_delay_cycles;
+
+ return pdata;
+}
+#else
+static inline struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
+{
+ return NULL;
+}
+#endif
+
static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
{
struct sdhci_pltfm_host *pltfm_host;
@@ -171,6 +214,8 @@
struct device *dev = &pdev->dev;
struct sdhci_host *host = NULL;
struct sdhci_pxa *pxa = NULL;
+ const struct of_device_id *match;
+
int ret;
struct clk *clk;
@@ -202,6 +247,10 @@
/* enable 1/8V DDR capable */
host->mmc->caps |= MMC_CAP_1_8V_DDR;
+ match = of_match_device(of_match_ptr(sdhci_pxav3_of_match), &pdev->dev);
+ if (match)
+ pdata = pxav3_get_mmc_pdata(dev);
+
if (pdata) {
if (pdata->flags & PXA_FLAG_CARD_PERMANENT) {
/* on-chip device */
@@ -263,6 +312,9 @@
static struct platform_driver sdhci_pxav3_driver = {
.driver = {
.name = "sdhci-pxav3",
+#ifdef CONFIG_OF
+ .of_match_table = sdhci_pxav3_of_match,
+#endif
.owner = THIS_MODULE,
.pm = SDHCI_PLTFM_PMOPS,
},
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 55a164f..a50c205 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -404,7 +404,7 @@
if (sc->ext_cd_irq &&
request_threaded_irq(sc->ext_cd_irq, NULL,
sdhci_s3c_gpio_card_detect_thread,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
dev_name(dev), sc) == 0) {
int status = gpio_get_value(sc->ext_cd_gpio);
if (pdata->ext_cd_gpio_invert)
diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index 1fe32df..423da81 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -4,7 +4,7 @@
* Support of SDHCI platform devices for spear soc family
*
* Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* Inspired by sdhci-pltfm.c
*
@@ -289,5 +289,5 @@
module_platform_driver(sdhci_driver);
MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index b38d8a7..0810ccc 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -223,6 +223,7 @@
{
struct tegra_sdhci_platform_data *plat;
struct device_node *np = pdev->dev.of_node;
+ u32 bus_width;
if (!np)
return NULL;
@@ -236,7 +237,9 @@
plat->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
plat->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
plat->power_gpio = of_get_named_gpio(np, "power-gpios", 0);
- if (of_find_property(np, "support-8bit", NULL))
+
+ if (of_property_read_u32(np, "bus-width", &bus_width) == 0 &&
+ bus_width == 8)
plat->is_8bit = 1;
return plat;
@@ -334,7 +337,7 @@
rc = PTR_ERR(clk);
goto err_clk_get;
}
- clk_enable(clk);
+ clk_prepare_enable(clk);
pltfm_host->clk = clk;
host->mmc->pm_caps = plat->pm_flags;
@@ -349,7 +352,7 @@
return 0;
err_add_host:
- clk_disable(pltfm_host->clk);
+ clk_disable_unprepare(pltfm_host->clk);
clk_put(pltfm_host->clk);
err_clk_get:
if (gpio_is_valid(plat->wp_gpio))
@@ -390,7 +393,7 @@
if (gpio_is_valid(plat->power_gpio))
gpio_free(plat->power_gpio);
- clk_disable(pltfm_host->clk);
+ clk_disable_unprepare(pltfm_host->clk);
clk_put(pltfm_host->clk);
sdhci_pltfm_free(pdev);
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index e626732..9a11dc3 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -27,6 +27,7 @@
#include <linux/mmc/mmc.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
#include "sdhci.h"
@@ -244,6 +245,19 @@
static void sdhci_reinit(struct sdhci_host *host)
{
sdhci_init(host, 0);
+ /*
+ * Retuning stuffs are affected by different cards inserted and only
+ * applicable to UHS-I cards. So reset these fields to their initial
+ * value when card is removed.
+ */
+ if (host->flags & SDHCI_USING_RETUNING_TIMER) {
+ host->flags &= ~SDHCI_USING_RETUNING_TIMER;
+
+ del_timer_sync(&host->tuning_timer);
+ host->flags &= ~SDHCI_NEEDS_RETUNING;
+ host->mmc->max_blk_count =
+ (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
+ }
sdhci_enable_card_detection(host);
}
@@ -680,8 +694,8 @@
}
if (count >= 0xF) {
- pr_warning("%s: Too large timeout 0x%x requested for CMD%d!\n",
- mmc_hostname(host->mmc), count, cmd->opcode);
+ DBG("%s: Too large timeout 0x%x requested for CMD%d!\n",
+ mmc_hostname(host->mmc), count, cmd->opcode);
count = 0xE;
}
@@ -1245,6 +1259,7 @@
struct sdhci_host *host;
bool present;
unsigned long flags;
+ u32 tuning_opcode;
host = mmc_priv(mmc);
@@ -1292,8 +1307,12 @@
*/
if ((host->flags & SDHCI_NEEDS_RETUNING) &&
!(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) {
+ /* eMMC uses cmd21 while sd and sdio use cmd19 */
+ tuning_opcode = mmc->card->type == MMC_TYPE_MMC ?
+ MMC_SEND_TUNING_BLOCK_HS200 :
+ MMC_SEND_TUNING_BLOCK;
spin_unlock_irqrestore(&host->lock, flags);
- sdhci_execute_tuning(mmc, mrq->cmd->opcode);
+ sdhci_execute_tuning(mmc, tuning_opcode);
spin_lock_irqsave(&host->lock, flags);
/* Restore original mmc_request structure */
@@ -1663,11 +1682,15 @@
pwr = sdhci_readb(host, SDHCI_POWER_CONTROL);
pwr &= ~SDHCI_POWER_ON;
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+ if (host->vmmc)
+ regulator_disable(host->vmmc);
/* Wait for 1ms as per the spec */
usleep_range(1000, 1500);
pwr |= SDHCI_POWER_ON;
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+ if (host->vmmc)
+ regulator_enable(host->vmmc);
pr_info(DRIVER_NAME ": Switching to 1.8V signalling "
"voltage failed, retrying with S18R set to 0\n");
@@ -1855,6 +1878,7 @@
*/
if (!(host->flags & SDHCI_NEEDS_RETUNING) && host->tuning_count &&
(host->tuning_mode == SDHCI_TUNING_MODE_1)) {
+ host->flags |= SDHCI_USING_RETUNING_TIMER;
mod_timer(&host->tuning_timer, jiffies +
host->tuning_count * HZ);
/* Tuning mode 1 limits the maximum data length to 4MB */
@@ -1872,10 +1896,10 @@
* try tuning again at a later time, when the re-tuning timer expires.
* So for these controllers, we return 0. Since there might be other
* controllers who do not have this capability, we return error for
- * them.
+ * them. SDHCI_USING_RETUNING_TIMER means the host is currently using
+ * a retuning timer to do the retuning for the card.
*/
- if (err && host->tuning_count &&
- host->tuning_mode == SDHCI_TUNING_MODE_1)
+ if (err && (host->flags & SDHCI_USING_RETUNING_TIMER))
err = 0;
sdhci_clear_set_irqs(host, SDHCI_INT_DATA_AVAIL, ier);
@@ -2382,7 +2406,6 @@
int sdhci_suspend_host(struct sdhci_host *host)
{
int ret;
- bool has_tuning_timer;
if (host->ops->platform_suspend)
host->ops->platform_suspend(host);
@@ -2390,16 +2413,14 @@
sdhci_disable_card_detection(host);
/* Disable tuning since we are suspending */
- has_tuning_timer = host->version >= SDHCI_SPEC_300 &&
- host->tuning_count && host->tuning_mode == SDHCI_TUNING_MODE_1;
- if (has_tuning_timer) {
+ if (host->flags & SDHCI_USING_RETUNING_TIMER) {
del_timer_sync(&host->tuning_timer);
host->flags &= ~SDHCI_NEEDS_RETUNING;
}
ret = mmc_suspend_host(host->mmc);
if (ret) {
- if (has_tuning_timer) {
+ if (host->flags & SDHCI_USING_RETUNING_TIMER) {
host->flags |= SDHCI_NEEDS_RETUNING;
mod_timer(&host->tuning_timer, jiffies +
host->tuning_count * HZ);
@@ -2450,8 +2471,7 @@
host->ops->platform_resume(host);
/* Set the re-tuning expiration flag */
- if ((host->version >= SDHCI_SPEC_300) && host->tuning_count &&
- (host->tuning_mode == SDHCI_TUNING_MODE_1))
+ if (host->flags & SDHCI_USING_RETUNING_TIMER)
host->flags |= SDHCI_NEEDS_RETUNING;
return ret;
@@ -2490,8 +2510,7 @@
int ret = 0;
/* Disable tuning since we are suspending */
- if (host->version >= SDHCI_SPEC_300 &&
- host->tuning_mode == SDHCI_TUNING_MODE_1) {
+ if (host->flags & SDHCI_USING_RETUNING_TIMER) {
del_timer_sync(&host->tuning_timer);
host->flags &= ~SDHCI_NEEDS_RETUNING;
}
@@ -2532,8 +2551,7 @@
sdhci_do_enable_preset_value(host, true);
/* Set the re-tuning expiration flag */
- if ((host->version >= SDHCI_SPEC_300) && host->tuning_count &&
- (host->tuning_mode == SDHCI_TUNING_MODE_1))
+ if (host->flags & SDHCI_USING_RETUNING_TIMER)
host->flags |= SDHCI_NEEDS_RETUNING;
spin_lock_irqsave(&host->lock, flags);
@@ -2584,7 +2602,7 @@
int sdhci_add_host(struct sdhci_host *host)
{
struct mmc_host *mmc;
- u32 caps[2];
+ u32 caps[2] = {0, 0};
u32 max_current_caps;
unsigned int ocr_avail;
int ret;
@@ -2614,8 +2632,10 @@
caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
sdhci_readl(host, SDHCI_CAPABILITIES);
- caps[1] = (host->version >= SDHCI_SPEC_300) ?
- sdhci_readl(host, SDHCI_CAPABILITIES_1) : 0;
+ if (host->version >= SDHCI_SPEC_300)
+ caps[1] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ?
+ host->caps1 :
+ sdhci_readl(host, SDHCI_CAPABILITIES_1);
if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
host->flags |= SDHCI_USE_SDMA;
@@ -2779,7 +2799,7 @@
mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) &&
- mmc_card_is_removable(mmc))
+ !(host->mmc->caps & MMC_CAP_NONREMOVABLE))
mmc->caps |= MMC_CAP_NEEDS_POLL;
/* Any UHS-I mode in caps implies SDR12 and SDR25 support. */
@@ -2837,6 +2857,30 @@
SDHCI_RETUNING_MODE_SHIFT;
ocr_avail = 0;
+
+ host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
+ if (IS_ERR(host->vmmc)) {
+ pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
+ host->vmmc = NULL;
+ }
+
+#ifdef CONFIG_REGULATOR
+ if (host->vmmc) {
+ ret = regulator_is_supported_voltage(host->vmmc, 3300000,
+ 3300000);
+ if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330)))
+ caps[0] &= ~SDHCI_CAN_VDD_330;
+ ret = regulator_is_supported_voltage(host->vmmc, 3000000,
+ 3000000);
+ if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300)))
+ caps[0] &= ~SDHCI_CAN_VDD_300;
+ ret = regulator_is_supported_voltage(host->vmmc, 1800000,
+ 1800000);
+ if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180)))
+ caps[0] &= ~SDHCI_CAN_VDD_180;
+ }
+#endif /* CONFIG_REGULATOR */
+
/*
* According to SD Host Controller spec v3.00, if the Host System
* can afford more than 150mA, Host Driver should set XPC to 1. Also
@@ -2845,55 +2889,45 @@
* value.
*/
max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT);
+ if (!max_current_caps && host->vmmc) {
+ u32 curr = regulator_get_current_limit(host->vmmc);
+ if (curr > 0) {
+
+ /* convert to SDHCI_MAX_CURRENT format */
+ curr = curr/1000; /* convert to mA */
+ curr = curr/SDHCI_MAX_CURRENT_MULTIPLIER;
+
+ curr = min_t(u32, curr, SDHCI_MAX_CURRENT_LIMIT);
+ max_current_caps =
+ (curr << SDHCI_MAX_CURRENT_330_SHIFT) |
+ (curr << SDHCI_MAX_CURRENT_300_SHIFT) |
+ (curr << SDHCI_MAX_CURRENT_180_SHIFT);
+ }
+ }
if (caps[0] & SDHCI_CAN_VDD_330) {
- int max_current_330;
-
ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34;
- max_current_330 = ((max_current_caps &
+ mmc->max_current_330 = ((max_current_caps &
SDHCI_MAX_CURRENT_330_MASK) >>
SDHCI_MAX_CURRENT_330_SHIFT) *
SDHCI_MAX_CURRENT_MULTIPLIER;
-
- if (max_current_330 > 150)
- mmc->caps |= MMC_CAP_SET_XPC_330;
}
if (caps[0] & SDHCI_CAN_VDD_300) {
- int max_current_300;
-
ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31;
- max_current_300 = ((max_current_caps &
+ mmc->max_current_300 = ((max_current_caps &
SDHCI_MAX_CURRENT_300_MASK) >>
SDHCI_MAX_CURRENT_300_SHIFT) *
SDHCI_MAX_CURRENT_MULTIPLIER;
-
- if (max_current_300 > 150)
- mmc->caps |= MMC_CAP_SET_XPC_300;
}
if (caps[0] & SDHCI_CAN_VDD_180) {
- int max_current_180;
-
ocr_avail |= MMC_VDD_165_195;
- max_current_180 = ((max_current_caps &
+ mmc->max_current_180 = ((max_current_caps &
SDHCI_MAX_CURRENT_180_MASK) >>
SDHCI_MAX_CURRENT_180_SHIFT) *
SDHCI_MAX_CURRENT_MULTIPLIER;
-
- if (max_current_180 > 150)
- mmc->caps |= MMC_CAP_SET_XPC_180;
-
- /* Maximum current capabilities of the host at 1.8V */
- if (max_current_180 >= 800)
- mmc->caps |= MMC_CAP_MAX_CURRENT_800;
- else if (max_current_180 >= 600)
- mmc->caps |= MMC_CAP_MAX_CURRENT_600;
- else if (max_current_180 >= 400)
- mmc->caps |= MMC_CAP_MAX_CURRENT_400;
- else
- mmc->caps |= MMC_CAP_MAX_CURRENT_200;
}
mmc->ocr_avail = ocr_avail;
@@ -2992,13 +3026,10 @@
ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
mmc_hostname(mmc), host);
- if (ret)
+ if (ret) {
+ pr_err("%s: Failed to request IRQ %d: %d\n",
+ mmc_hostname(mmc), host->irq, ret);
goto untasklet;
-
- host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
- if (IS_ERR(host->vmmc)) {
- pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
- host->vmmc = NULL;
}
sdhci_init(host, 0);
@@ -3016,8 +3047,11 @@
host->led.brightness_set = sdhci_led_control;
ret = led_classdev_register(mmc_dev(mmc), &host->led);
- if (ret)
+ if (ret) {
+ pr_err("%s: Failed to register LED device: %d\n",
+ mmc_hostname(mmc), ret);
goto reset;
+ }
#endif
mmiowb();
@@ -3081,8 +3115,6 @@
free_irq(host->irq, host);
del_timer_sync(&host->timer);
- if (host->version >= SDHCI_SPEC_300)
- del_timer_sync(&host->tuning_timer);
tasklet_kill(&host->card_tasklet);
tasklet_kill(&host->finish_tasklet);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index f761f23..97653ea 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -205,6 +205,7 @@
#define SDHCI_CAPABILITIES_1 0x44
#define SDHCI_MAX_CURRENT 0x48
+#define SDHCI_MAX_CURRENT_LIMIT 0xFF
#define SDHCI_MAX_CURRENT_330_MASK 0x0000FF
#define SDHCI_MAX_CURRENT_330_SHIFT 0
#define SDHCI_MAX_CURRENT_300_MASK 0x00FF00
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 724b35e..b2af713 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -54,6 +54,8 @@
#include <linux/mmc/mmc.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/mod_devicetable.h>
#include <linux/pagemap.h>
#include <linux/platform_device.h>
#include <linux/pm_qos.h>
@@ -384,6 +386,9 @@
struct sh_dmae_slave *tx, *rx;
host->dma_active = false;
+ if (!pdata)
+ return;
+
/* We can only either use DMA for both Tx and Rx or not use it at all */
if (pdata->dma) {
dev_warn(&host->pd->dev,
@@ -444,13 +449,14 @@
static void sh_mmcif_clock_control(struct sh_mmcif_host *host, unsigned int clk)
{
struct sh_mmcif_plat_data *p = host->pd->dev.platform_data;
+ bool sup_pclk = p ? p->sup_pclk : false;
sh_mmcif_bitclr(host, MMCIF_CE_CLK_CTRL, CLK_ENABLE);
sh_mmcif_bitclr(host, MMCIF_CE_CLK_CTRL, CLK_CLEAR);
if (!clk)
return;
- if (p->sup_pclk && clk == host->clk)
+ if (sup_pclk && clk == host->clk)
sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, CLK_SUP_PCLK);
else
sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, CLK_CLEAR &
@@ -892,21 +898,15 @@
switch (mrq->cmd->opcode) {
/* MMCIF does not support SD/SDIO command */
- case SD_IO_SEND_OP_COND:
+ case MMC_SLEEP_AWAKE: /* = SD_IO_SEND_OP_COND (5) */
+ case MMC_SEND_EXT_CSD: /* = SD_SEND_IF_COND (8) */
+ if ((mrq->cmd->flags & MMC_CMD_MASK) != MMC_CMD_BCR)
+ break;
case MMC_APP_CMD:
host->state = STATE_IDLE;
mrq->cmd->error = -ETIMEDOUT;
mmc_request_done(mmc, mrq);
return;
- case MMC_SEND_EXT_CSD: /* = SD_SEND_IF_COND (8) */
- if (!mrq->data) {
- /* send_if_cond cmd (not support) */
- host->state = STATE_IDLE;
- mrq->cmd->error = -ETIMEDOUT;
- mmc_request_done(mmc, mrq);
- return;
- }
- break;
default:
break;
}
@@ -916,10 +916,35 @@
sh_mmcif_start_cmd(host, mrq);
}
+static int sh_mmcif_clk_update(struct sh_mmcif_host *host)
+{
+ int ret = clk_enable(host->hclk);
+
+ if (!ret) {
+ host->clk = clk_get_rate(host->hclk);
+ host->mmc->f_max = host->clk / 2;
+ host->mmc->f_min = host->clk / 512;
+ }
+
+ return ret;
+}
+
+static void sh_mmcif_set_power(struct sh_mmcif_host *host, struct mmc_ios *ios)
+{
+ struct sh_mmcif_plat_data *pd = host->pd->dev.platform_data;
+ struct mmc_host *mmc = host->mmc;
+
+ if (pd && pd->set_pwr)
+ pd->set_pwr(host->pd, ios->power_mode != MMC_POWER_OFF);
+ if (!IS_ERR(mmc->supply.vmmc))
+ /* Errors ignored... */
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
+ ios->power_mode ? ios->vdd : 0);
+}
+
static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct sh_mmcif_host *host = mmc_priv(mmc);
- struct sh_mmcif_plat_data *p = host->pd->dev.platform_data;
unsigned long flags;
spin_lock_irqsave(&host->lock, flags);
@@ -937,6 +962,7 @@
sh_mmcif_request_dma(host, host->pd->dev.platform_data);
host->card_present = true;
}
+ sh_mmcif_set_power(host, ios);
} else if (ios->power_mode == MMC_POWER_OFF || !ios->clock) {
/* clock stop */
sh_mmcif_clock_control(host, 0);
@@ -948,9 +974,10 @@
}
if (host->power) {
pm_runtime_put(&host->pd->dev);
+ clk_disable(host->hclk);
host->power = false;
- if (p->down_pwr && ios->power_mode == MMC_POWER_OFF)
- p->down_pwr(host->pd);
+ if (ios->power_mode == MMC_POWER_OFF)
+ sh_mmcif_set_power(host, ios);
}
host->state = STATE_IDLE;
return;
@@ -958,8 +985,7 @@
if (ios->clock) {
if (!host->power) {
- if (p->set_pwr)
- p->set_pwr(host->pd, ios->power_mode);
+ sh_mmcif_clk_update(host);
pm_runtime_get_sync(&host->pd->dev);
host->power = true;
sh_mmcif_sync_reset(host);
@@ -975,8 +1001,12 @@
{
struct sh_mmcif_host *host = mmc_priv(mmc);
struct sh_mmcif_plat_data *p = host->pd->dev.platform_data;
+ int ret = mmc_gpio_get_cd(mmc);
- if (!p->get_cd)
+ if (ret >= 0)
+ return ret;
+
+ if (!p || !p->get_cd)
return -ENOSYS;
else
return p->get_cd(host->pd);
@@ -1242,12 +1272,28 @@
mmc_request_done(host->mmc, mrq);
}
+static void sh_mmcif_init_ocr(struct sh_mmcif_host *host)
+{
+ struct sh_mmcif_plat_data *pd = host->pd->dev.platform_data;
+ struct mmc_host *mmc = host->mmc;
+
+ mmc_regulator_get_supply(mmc);
+
+ if (!pd)
+ return;
+
+ if (!mmc->ocr_avail)
+ mmc->ocr_avail = pd->ocr;
+ else if (pd->ocr)
+ dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n");
+}
+
static int __devinit sh_mmcif_probe(struct platform_device *pdev)
{
int ret = 0, irq[2];
struct mmc_host *mmc;
struct sh_mmcif_host *host;
- struct sh_mmcif_plat_data *pd;
+ struct sh_mmcif_plat_data *pd = pdev->dev.platform_data;
struct resource *res;
void __iomem *reg;
char clk_name[8];
@@ -1268,42 +1314,26 @@
dev_err(&pdev->dev, "ioremap error.\n");
return -ENOMEM;
}
- pd = pdev->dev.platform_data;
- if (!pd) {
- dev_err(&pdev->dev, "sh_mmcif plat data error.\n");
- ret = -ENXIO;
- goto clean_up;
- }
+
mmc = mmc_alloc_host(sizeof(struct sh_mmcif_host), &pdev->dev);
if (!mmc) {
ret = -ENOMEM;
- goto clean_up;
+ goto ealloch;
}
host = mmc_priv(mmc);
host->mmc = mmc;
host->addr = reg;
host->timeout = 1000;
- snprintf(clk_name, sizeof(clk_name), "mmc%d", pdev->id);
- host->hclk = clk_get(&pdev->dev, clk_name);
- if (IS_ERR(host->hclk)) {
- dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
- ret = PTR_ERR(host->hclk);
- goto clean_up1;
- }
- clk_enable(host->hclk);
- host->clk = clk_get_rate(host->hclk);
host->pd = pdev;
spin_lock_init(&host->lock);
mmc->ops = &sh_mmcif_ops;
- mmc->f_max = host->clk / 2;
- mmc->f_min = host->clk / 512;
- if (pd->ocr)
- mmc->ocr_avail = pd->ocr;
+ sh_mmcif_init_ocr(host);
+
mmc->caps = MMC_CAP_MMC_HIGHSPEED;
- if (pd->caps)
+ if (pd && pd->caps)
mmc->caps |= pd->caps;
mmc->max_segs = 32;
mmc->max_blk_size = 512;
@@ -1311,34 +1341,52 @@
mmc->max_blk_count = mmc->max_req_size / mmc->max_blk_size;
mmc->max_seg_size = mmc->max_req_size;
- sh_mmcif_sync_reset(host);
platform_set_drvdata(pdev, host);
pm_runtime_enable(&pdev->dev);
host->power = false;
+ snprintf(clk_name, sizeof(clk_name), "mmc%d", pdev->id);
+ host->hclk = clk_get(&pdev->dev, clk_name);
+ if (IS_ERR(host->hclk)) {
+ ret = PTR_ERR(host->hclk);
+ dev_err(&pdev->dev, "cannot get clock \"%s\": %d\n", clk_name, ret);
+ goto eclkget;
+ }
+ ret = sh_mmcif_clk_update(host);
+ if (ret < 0)
+ goto eclkupdate;
+
ret = pm_runtime_resume(&pdev->dev);
if (ret < 0)
- goto clean_up2;
+ goto eresume;
INIT_DELAYED_WORK(&host->timeout_work, mmcif_timeout_work);
+ sh_mmcif_sync_reset(host);
sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
ret = request_threaded_irq(irq[0], sh_mmcif_intr, sh_mmcif_irqt, 0, "sh_mmc:error", host);
if (ret) {
dev_err(&pdev->dev, "request_irq error (sh_mmc:error)\n");
- goto clean_up3;
+ goto ereqirq0;
}
ret = request_threaded_irq(irq[1], sh_mmcif_intr, sh_mmcif_irqt, 0, "sh_mmc:int", host);
if (ret) {
dev_err(&pdev->dev, "request_irq error (sh_mmc:int)\n");
- goto clean_up4;
+ goto ereqirq1;
}
+ if (pd && pd->use_cd_gpio) {
+ ret = mmc_gpio_request_cd(mmc, pd->cd_gpio);
+ if (ret < 0)
+ goto erqcd;
+ }
+
+ clk_disable(host->hclk);
ret = mmc_add_host(mmc);
if (ret < 0)
- goto clean_up5;
+ goto emmcaddh;
dev_pm_qos_expose_latency_limit(&pdev->dev, 100);
@@ -1347,33 +1395,42 @@
sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff);
return ret;
-clean_up5:
+emmcaddh:
+ if (pd && pd->use_cd_gpio)
+ mmc_gpio_free_cd(mmc);
+erqcd:
free_irq(irq[1], host);
-clean_up4:
+ereqirq1:
free_irq(irq[0], host);
-clean_up3:
+ereqirq0:
pm_runtime_suspend(&pdev->dev);
-clean_up2:
- pm_runtime_disable(&pdev->dev);
+eresume:
clk_disable(host->hclk);
-clean_up1:
+eclkupdate:
+ clk_put(host->hclk);
+eclkget:
+ pm_runtime_disable(&pdev->dev);
mmc_free_host(mmc);
-clean_up:
- if (reg)
- iounmap(reg);
+ealloch:
+ iounmap(reg);
return ret;
}
static int __devexit sh_mmcif_remove(struct platform_device *pdev)
{
struct sh_mmcif_host *host = platform_get_drvdata(pdev);
+ struct sh_mmcif_plat_data *pd = pdev->dev.platform_data;
int irq[2];
host->dying = true;
+ clk_enable(host->hclk);
pm_runtime_get_sync(&pdev->dev);
dev_pm_qos_hide_latency_limit(&pdev->dev);
+ if (pd && pd->use_cd_gpio)
+ mmc_gpio_free_cd(host->mmc);
+
mmc_remove_host(host->mmc);
sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
@@ -1395,9 +1452,9 @@
platform_set_drvdata(pdev, NULL);
- clk_disable(host->hclk);
mmc_free_host(host->mmc);
pm_runtime_put_sync(&pdev->dev);
+ clk_disable(host->hclk);
pm_runtime_disable(&pdev->dev);
return 0;
@@ -1406,24 +1463,18 @@
#ifdef CONFIG_PM
static int sh_mmcif_suspend(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct sh_mmcif_host *host = platform_get_drvdata(pdev);
+ struct sh_mmcif_host *host = dev_get_drvdata(dev);
int ret = mmc_suspend_host(host->mmc);
- if (!ret) {
+ if (!ret)
sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
- clk_disable(host->hclk);
- }
return ret;
}
static int sh_mmcif_resume(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct sh_mmcif_host *host = platform_get_drvdata(pdev);
-
- clk_enable(host->hclk);
+ struct sh_mmcif_host *host = dev_get_drvdata(dev);
return mmc_resume_host(host->mmc);
}
@@ -1432,6 +1483,12 @@
#define sh_mmcif_resume NULL
#endif /* CONFIG_PM */
+static const struct of_device_id mmcif_of_match[] = {
+ { .compatible = "renesas,sh-mmcif" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mmcif_of_match);
+
static const struct dev_pm_ops sh_mmcif_dev_pm_ops = {
.suspend = sh_mmcif_suspend,
.resume = sh_mmcif_resume,
@@ -1443,6 +1500,8 @@
.driver = {
.name = DRIVER_NAME,
.pm = &sh_mmcif_dev_pm_ops,
+ .owner = THIS_MODULE,
+ .of_match_table = mmcif_of_match,
},
};
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index 934b68e..a842939 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -21,6 +21,7 @@
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/slab.h>
+#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mmc/host.h>
@@ -39,22 +40,39 @@
struct tmio_mmc_dma dma_priv;
};
+static int sh_mobile_sdhi_clk_enable(struct platform_device *pdev, unsigned int *f)
+{
+ struct mmc_host *mmc = dev_get_drvdata(&pdev->dev);
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+ struct sh_mobile_sdhi *priv = container_of(host->pdata, struct sh_mobile_sdhi, mmc_data);
+ int ret = clk_enable(priv->clk);
+ if (ret < 0)
+ return ret;
+
+ *f = clk_get_rate(priv->clk);
+ return 0;
+}
+
+static void sh_mobile_sdhi_clk_disable(struct platform_device *pdev)
+{
+ struct mmc_host *mmc = dev_get_drvdata(&pdev->dev);
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+ struct sh_mobile_sdhi *priv = container_of(host->pdata, struct sh_mobile_sdhi, mmc_data);
+ clk_disable(priv->clk);
+}
+
static void sh_mobile_sdhi_set_pwr(struct platform_device *pdev, int state)
{
struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
- if (p && p->set_pwr)
- p->set_pwr(pdev, state);
+ p->set_pwr(pdev, state);
}
static int sh_mobile_sdhi_get_cd(struct platform_device *pdev)
{
struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
- if (p && p->get_cd)
- return p->get_cd(pdev);
- else
- return -ENOSYS;
+ return p->get_cd(pdev);
}
static int sh_mobile_sdhi_wait_idle(struct tmio_mmc_host *host)
@@ -116,12 +134,14 @@
}
mmc_data = &priv->mmc_data;
- p->pdata = mmc_data;
- if (p->init) {
- ret = p->init(pdev, &sdhi_ops);
- if (ret)
- goto einit;
+ if (p) {
+ p->pdata = mmc_data;
+ if (p->init) {
+ ret = p->init(pdev, &sdhi_ops);
+ if (ret)
+ goto einit;
+ }
}
snprintf(clk_name, sizeof(clk_name), "sdhi%d", pdev->id);
@@ -132,9 +152,8 @@
goto eclkget;
}
- mmc_data->hclk = clk_get_rate(priv->clk);
- mmc_data->set_pwr = sh_mobile_sdhi_set_pwr;
- mmc_data->get_cd = sh_mobile_sdhi_get_cd;
+ mmc_data->clk_enable = sh_mobile_sdhi_clk_enable;
+ mmc_data->clk_disable = sh_mobile_sdhi_clk_disable;
mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED;
if (p) {
mmc_data->flags = p->tmio_flags;
@@ -142,7 +161,12 @@
mmc_data->write16_hook = sh_mobile_sdhi_write16_hook;
mmc_data->ocr_mask = p->tmio_ocr_mask;
mmc_data->capabilities |= p->tmio_caps;
+ mmc_data->capabilities2 |= p->tmio_caps2;
mmc_data->cd_gpio = p->cd_gpio;
+ if (p->set_pwr)
+ mmc_data->set_pwr = sh_mobile_sdhi_set_pwr;
+ if (p->get_cd)
+ mmc_data->get_cd = sh_mobile_sdhi_get_cd;
if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) {
priv->param_tx.slave_id = p->dma_slave_tx;
@@ -248,7 +272,7 @@
eprobe:
clk_put(priv->clk);
eclkget:
- if (p->cleanup)
+ if (p && p->cleanup)
p->cleanup(pdev);
einit:
kfree(priv);
@@ -263,7 +287,8 @@
struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
int i = 0, irq;
- p->pdata = NULL;
+ if (p)
+ p->pdata = NULL;
tmio_mmc_host_remove(host);
@@ -276,7 +301,7 @@
clk_put(priv->clk);
- if (p->cleanup)
+ if (p && p->cleanup)
p->cleanup(pdev);
kfree(priv);
@@ -291,11 +316,18 @@
.runtime_resume = tmio_mmc_host_runtime_resume,
};
+static const struct of_device_id sh_mobile_sdhi_of_match[] = {
+ { .compatible = "renesas,shmobile-sdhi" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match);
+
static struct platform_driver sh_mobile_sdhi_driver = {
.driver = {
.name = "sh_mobile_sdhi",
.owner = THIS_MODULE,
.pm = &tmio_mmc_dev_pm_ops,
+ .of_match_table = sh_mobile_sdhi_of_match,
},
.probe = sh_mobile_sdhi_probe,
.remove = __devexit_p(sh_mobile_sdhi_remove),
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 9a7996a..0d8a9bb 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -34,8 +34,9 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/mfd/tmio.h>
-#include <linux/mmc/cd-gpio.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/slot-gpio.h>
#include <linux/mmc/tmio.h>
#include <linux/module.h>
#include <linux/pagemap.h>
@@ -305,8 +306,8 @@
int c = cmd->opcode;
u32 irq_mask = TMIO_MASK_CMD;
- /* Command 12 is handled by hardware */
- if (cmd->opcode == 12 && !cmd->arg) {
+ /* CMD12 is handled by hardware */
+ if (cmd->opcode == MMC_STOP_TRANSMISSION && !cmd->arg) {
sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001);
return 0;
}
@@ -449,7 +450,7 @@
}
if (stop) {
- if (stop->opcode == 12 && !stop->arg)
+ if (stop->opcode == MMC_STOP_TRANSMISSION && !stop->arg)
sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000);
else
BUG();
@@ -751,6 +752,34 @@
mmc_request_done(mmc, mrq);
}
+static int tmio_mmc_clk_update(struct mmc_host *mmc)
+{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+ struct tmio_mmc_data *pdata = host->pdata;
+ int ret;
+
+ if (!pdata->clk_enable)
+ return -ENOTSUPP;
+
+ ret = pdata->clk_enable(host->pdev, &mmc->f_max);
+ if (!ret)
+ mmc->f_min = mmc->f_max / 512;
+
+ return ret;
+}
+
+static void tmio_mmc_set_power(struct tmio_mmc_host *host, struct mmc_ios *ios)
+{
+ struct mmc_host *mmc = host->mmc;
+
+ if (host->set_pwr)
+ host->set_pwr(host->pdev, ios->power_mode != MMC_POWER_OFF);
+ if (!IS_ERR(mmc->supply.vmmc))
+ /* Errors ignored... */
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
+ ios->power_mode ? ios->vdd : 0);
+}
+
/* Set MMC clock / power.
* Note: This controller uses a simple divider scheme therefore it cannot
* run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
@@ -797,32 +826,37 @@
*/
if (ios->power_mode == MMC_POWER_ON && ios->clock) {
if (!host->power) {
+ tmio_mmc_clk_update(mmc);
pm_runtime_get_sync(dev);
host->power = true;
}
tmio_mmc_set_clock(host, ios->clock);
/* power up SD bus */
- if (host->set_pwr)
- host->set_pwr(host->pdev, 1);
+ tmio_mmc_set_power(host, ios);
/* start bus clock */
tmio_mmc_clk_start(host);
} else if (ios->power_mode != MMC_POWER_UP) {
- if (host->set_pwr && ios->power_mode == MMC_POWER_OFF)
- host->set_pwr(host->pdev, 0);
+ if (ios->power_mode == MMC_POWER_OFF)
+ tmio_mmc_set_power(host, ios);
if (host->power) {
+ struct tmio_mmc_data *pdata = host->pdata;
+ tmio_mmc_clk_stop(host);
host->power = false;
pm_runtime_put(dev);
+ if (pdata->clk_disable)
+ pdata->clk_disable(host->pdev);
}
- tmio_mmc_clk_stop(host);
}
- switch (ios->bus_width) {
- case MMC_BUS_WIDTH_1:
- sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
- break;
- case MMC_BUS_WIDTH_4:
- sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
- break;
+ if (host->power) {
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
+ break;
+ case MMC_BUS_WIDTH_4:
+ sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
+ break;
+ }
}
/* Let things settle. delay taken from winCE driver */
@@ -841,6 +875,9 @@
{
struct tmio_mmc_host *host = mmc_priv(mmc);
struct tmio_mmc_data *pdata = host->pdata;
+ int ret = mmc_gpio_get_ro(mmc);
+ if (ret >= 0)
+ return ret;
return !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
@@ -850,6 +887,9 @@
{
struct tmio_mmc_host *host = mmc_priv(mmc);
struct tmio_mmc_data *pdata = host->pdata;
+ int ret = mmc_gpio_get_cd(mmc);
+ if (ret >= 0)
+ return ret;
if (!pdata->get_cd)
return -ENOSYS;
@@ -865,6 +905,19 @@
.enable_sdio_irq = tmio_mmc_enable_sdio_irq,
};
+static void tmio_mmc_init_ocr(struct tmio_mmc_host *host)
+{
+ struct tmio_mmc_data *pdata = host->pdata;
+ struct mmc_host *mmc = host->mmc;
+
+ mmc_regulator_get_supply(mmc);
+
+ if (!mmc->ocr_avail)
+ mmc->ocr_avail = pdata->ocr_mask ? : MMC_VDD_32_33 | MMC_VDD_33_34;
+ else if (pdata->ocr_mask)
+ dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n");
+}
+
int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
struct platform_device *pdev,
struct tmio_mmc_data *pdata)
@@ -904,18 +957,14 @@
mmc->ops = &tmio_mmc_ops;
mmc->caps = MMC_CAP_4_BIT_DATA | pdata->capabilities;
- mmc->f_max = pdata->hclk;
- mmc->f_min = mmc->f_max / 512;
+ mmc->caps2 = pdata->capabilities2;
mmc->max_segs = 32;
mmc->max_blk_size = 512;
mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) *
mmc->max_segs;
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
mmc->max_seg_size = mmc->max_req_size;
- if (pdata->ocr_mask)
- mmc->ocr_avail = pdata->ocr_mask;
- else
- mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ tmio_mmc_init_ocr(_host);
_host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD ||
mmc->caps & MMC_CAP_NEEDS_POLL ||
@@ -927,6 +976,11 @@
if (ret < 0)
goto pm_disable;
+ if (tmio_mmc_clk_update(mmc) < 0) {
+ mmc->f_max = pdata->hclk;
+ mmc->f_min = mmc->f_max / 512;
+ }
+
/*
* There are 4 different scenarios for the card detection:
* 1) an external gpio irq handles the cd (best for power savings)
@@ -937,7 +991,6 @@
* While we increment the runtime PM counter for all scenarios when
* the mmc core activates us by calling an appropriate set_ios(), we
* must additionally ensure that in case 2) the tmio mmc hardware stays
- * additionally ensure that in case 2) the tmio mmc hardware stays
* powered on during runtime for the card detection to work.
*/
if (_host->native_hotplug)
@@ -948,6 +1001,17 @@
_host->sdcard_irq_mask = sd_ctrl_read32(_host, CTL_IRQ_MASK);
tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
+
+ /* Unmask the IRQs we want to know about */
+ if (!_host->chan_rx)
+ irq_mask |= TMIO_MASK_READOP;
+ if (!_host->chan_tx)
+ irq_mask |= TMIO_MASK_WRITEOP;
+ if (!_host->native_hotplug)
+ irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
+
+ _host->sdcard_irq_mask &= ~irq_mask;
+
if (pdata->flags & TMIO_MMC_SDIO_IRQ)
tmio_mmc_enable_sdio_irq(mmc, 0);
@@ -961,22 +1025,18 @@
/* See if we also get DMA */
tmio_mmc_request_dma(_host, pdata);
- mmc_add_host(mmc);
+ ret = mmc_add_host(mmc);
+ if (pdata->clk_disable)
+ pdata->clk_disable(pdev);
+ if (ret < 0) {
+ tmio_mmc_host_remove(_host);
+ return ret;
+ }
dev_pm_qos_expose_latency_limit(&pdev->dev, 100);
- /* Unmask the IRQs we want to know about */
- if (!_host->chan_rx)
- irq_mask |= TMIO_MASK_READOP;
- if (!_host->chan_tx)
- irq_mask |= TMIO_MASK_WRITEOP;
- if (!_host->native_hotplug)
- irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
-
- tmio_mmc_enable_mmc_irqs(_host, irq_mask);
-
if (pdata->flags & TMIO_MMC_USE_GPIO_CD) {
- ret = mmc_cd_gpio_request(mmc, pdata->cd_gpio);
+ ret = mmc_gpio_request_cd(mmc, pdata->cd_gpio);
if (ret < 0) {
tmio_mmc_host_remove(_host);
return ret;
@@ -1008,7 +1068,7 @@
* This means we can miss a card-eject, but this is anyway
* possible, because of delayed processing of hotplug events.
*/
- mmc_cd_gpio_free(mmc);
+ mmc_gpio_free_cd(mmc);
if (!host->native_hotplug)
pm_runtime_get_sync(&pdev->dev);
diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c
index ae36d7e..551e316 100644
--- a/drivers/mtd/mtdoops.c
+++ b/drivers/mtd/mtdoops.c
@@ -304,32 +304,17 @@
}
static void mtdoops_do_dump(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason, const char *s1, unsigned long l1,
- const char *s2, unsigned long l2)
+ enum kmsg_dump_reason reason)
{
struct mtdoops_context *cxt = container_of(dumper,
struct mtdoops_context, dump);
- unsigned long s1_start, s2_start;
- unsigned long l1_cpy, l2_cpy;
- char *dst;
-
- if (reason != KMSG_DUMP_OOPS &&
- reason != KMSG_DUMP_PANIC)
- return;
/* Only dump oopses if dump_oops is set */
if (reason == KMSG_DUMP_OOPS && !dump_oops)
return;
- dst = cxt->oops_buf + MTDOOPS_HEADER_SIZE; /* Skip the header */
- l2_cpy = min(l2, record_size - MTDOOPS_HEADER_SIZE);
- l1_cpy = min(l1, record_size - MTDOOPS_HEADER_SIZE - l2_cpy);
-
- s2_start = l2 - l2_cpy;
- s1_start = l1 - l1_cpy;
-
- memcpy(dst, s1 + s1_start, l1_cpy);
- memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
+ kmsg_dump_get_buffer(dumper, true, cxt->oops_buf + MTDOOPS_HEADER_SIZE,
+ record_size - MTDOOPS_HEADER_SIZE, NULL);
/* Panics must be written immediately */
if (reason != KMSG_DUMP_OOPS)
@@ -375,6 +360,7 @@
return;
}
+ cxt->dump.max_reason = KMSG_DUMP_OOPS;
cxt->dump.dump = mtdoops_do_dump;
err = kmsg_dump_register(&cxt->dump);
if (err) {
diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c
index a90bfe7..334da5f 100644
--- a/drivers/mtd/mtdsuper.c
+++ b/drivers/mtd/mtdsuper.c
@@ -63,7 +63,7 @@
struct super_block *sb;
int ret;
- sb = sget(fs_type, get_sb_mtd_compare, get_sb_mtd_set, mtd);
+ sb = sget(fs_type, get_sb_mtd_compare, get_sb_mtd_set, flags, mtd);
if (IS_ERR(sb))
goto out_error;
@@ -74,8 +74,6 @@
pr_debug("MTDSB: New superblock for device %d (\"%s\")\n",
mtd->index, mtd->name);
- sb->s_flags = flags;
-
ret = fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
if (ret < 0) {
deactivate_locked_super(sb);
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 41371ba..f3f6cfe 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -102,7 +102,7 @@
static int cafe_device_ready(struct mtd_info *mtd)
{
struct cafe_priv *cafe = mtd->priv;
- int result = !!(cafe_readl(cafe, NAND_STATUS) | 0x40000000);
+ int result = !!(cafe_readl(cafe, NAND_STATUS) & 0x40000000);
uint32_t irqs = cafe_readl(cafe, NAND_IRQ);
cafe_writel(cafe, irqs, NAND_IRQ);
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index a05b7b4..a6cad5c 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -920,12 +920,12 @@
*/
memset(chip->oob_poi, ~0, mtd->oobsize);
chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
-
- read_page_swap_end(this, buf, mtd->writesize,
- this->payload_virt, this->payload_phys,
- nfc_geo->payload_size,
- payload_virt, payload_phys);
}
+
+ read_page_swap_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
exit_nfc:
return ret;
}
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index c58e6a9..6acc790 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -273,6 +273,26 @@
static const char *part_probes[] = { "RedBoot", "cmdlinepart", "ofpart", NULL };
+static void memcpy32_fromio(void *trg, const void __iomem *src, size_t size)
+{
+ int i;
+ u32 *t = trg;
+ const __iomem u32 *s = src;
+
+ for (i = 0; i < (size >> 2); i++)
+ *t++ = __raw_readl(s++);
+}
+
+static void memcpy32_toio(void __iomem *trg, const void *src, int size)
+{
+ int i;
+ u32 __iomem *t = trg;
+ const u32 *s = src;
+
+ for (i = 0; i < (size >> 2); i++)
+ __raw_writel(*s++, t++);
+}
+
static int check_int_v3(struct mxc_nand_host *host)
{
uint32_t tmp;
@@ -519,7 +539,7 @@
wait_op_done(host, true);
- memcpy_fromio(host->data_buf, host->main_area0, 16);
+ memcpy32_fromio(host->data_buf, host->main_area0, 16);
}
/* Request the NANDFC to perform a read of the NAND device ID. */
@@ -535,7 +555,7 @@
/* Wait for operation to complete */
wait_op_done(host, true);
- memcpy_fromio(host->data_buf, host->main_area0, 16);
+ memcpy32_fromio(host->data_buf, host->main_area0, 16);
if (this->options & NAND_BUSWIDTH_16) {
/* compress the ID info */
@@ -797,16 +817,16 @@
if (bfrom) {
for (i = 0; i < n - 1; i++)
- memcpy_fromio(d + i * j, s + i * t, j);
+ memcpy32_fromio(d + i * j, s + i * t, j);
/* the last section */
- memcpy_fromio(d + i * j, s + i * t, mtd->oobsize - i * j);
+ memcpy32_fromio(d + i * j, s + i * t, mtd->oobsize - i * j);
} else {
for (i = 0; i < n - 1; i++)
- memcpy_toio(&s[i * t], &d[i * j], j);
+ memcpy32_toio(&s[i * t], &d[i * j], j);
/* the last section */
- memcpy_toio(&s[i * t], &d[i * j], mtd->oobsize - i * j);
+ memcpy32_toio(&s[i * t], &d[i * j], mtd->oobsize - i * j);
}
}
@@ -1070,7 +1090,8 @@
host->devtype_data->send_page(mtd, NFC_OUTPUT);
- memcpy_fromio(host->data_buf, host->main_area0, mtd->writesize);
+ memcpy32_fromio(host->data_buf, host->main_area0,
+ mtd->writesize);
copy_spare(mtd, true);
break;
@@ -1086,7 +1107,7 @@
break;
case NAND_CMD_PAGEPROG:
- memcpy_toio(host->main_area0, host->data_buf, mtd->writesize);
+ memcpy32_toio(host->main_area0, host->data_buf, mtd->writesize);
copy_spare(mtd, false);
host->devtype_data->send_page(mtd, NFC_INPUT);
host->devtype_data->send_cmd(host, command, true);
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index d47586c..a11253a0 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3501,6 +3501,13 @@
/* propagate ecc info to mtd_info */
mtd->ecclayout = chip->ecc.layout;
mtd->ecc_strength = chip->ecc.strength;
+ /*
+ * Initialize bitflip_threshold to its default prior scan_bbt() call.
+ * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be
+ * properly set.
+ */
+ if (!mtd->bitflip_threshold)
+ mtd->bitflip_threshold = mtd->ecc_strength;
/* Check, if we should skip the bad block table scan */
if (chip->options & NAND_SKIP_BBTSCAN)
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 6cc8fbf..cf0cd31 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -28,7 +28,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/string.h>
@@ -546,12 +546,6 @@
return kstrdup(buf, GFP_KERNEL);
}
-static uint64_t divide(uint64_t n, uint32_t d)
-{
- do_div(n, d);
- return n;
-}
-
/*
* Initialize the nandsim structure.
*
@@ -580,7 +574,7 @@
ns->geom.oobsz = mtd->oobsize;
ns->geom.secsz = mtd->erasesize;
ns->geom.pgszoob = ns->geom.pgsz + ns->geom.oobsz;
- ns->geom.pgnum = divide(ns->geom.totsz, ns->geom.pgsz);
+ ns->geom.pgnum = div_u64(ns->geom.totsz, ns->geom.pgsz);
ns->geom.totszoob = ns->geom.totsz + (uint64_t)ns->geom.pgnum * ns->geom.oobsz;
ns->geom.secshift = ffs(ns->geom.secsz) - 1;
ns->geom.pgshift = chip->page_shift;
@@ -921,7 +915,7 @@
if (!rptwear)
return 0;
- wear_eb_count = divide(mtd->size, mtd->erasesize);
+ wear_eb_count = div_u64(mtd->size, mtd->erasesize);
mem = wear_eb_count * sizeof(unsigned long);
if (mem / sizeof(unsigned long) != wear_eb_count) {
NS_ERR("Too many erase blocks for wear reporting\n");
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 738ee8d..ea4b95b 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -29,7 +29,7 @@
config MTD_UBI_BEB_RESERVE
int "Percentage of reserved eraseblocks for bad eraseblocks handling"
- default 1
+ default 2
range 0 25
help
If the MTD device admits of bad eraseblocks (e.g. NAND flash), UBI
diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index acec85d..fb55678 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -1026,7 +1026,7 @@
{
int ubi_num;
- dbg_gen("dettach MTD device");
+ dbg_gen("detach MTD device");
err = get_user(ubi_num, (__user int32_t *)argp);
if (err) {
err = -EFAULT;
diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c
index 09d4f8d..7c13803 100644
--- a/drivers/mtd/ubi/debug.c
+++ b/drivers/mtd/ubi/debug.c
@@ -264,7 +264,7 @@
*/
int ubi_debugfs_init(void)
{
- if (!IS_ENABLED(DEBUG_FS))
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
return 0;
dfs_rootdir = debugfs_create_dir("ubi", NULL);
@@ -284,7 +284,7 @@
*/
void ubi_debugfs_exit(void)
{
- if (IS_ENABLED(DEBUG_FS))
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
debugfs_remove(dfs_rootdir);
}
@@ -407,7 +407,7 @@
struct dentry *dent;
struct ubi_debug_info *d = ubi->dbg;
- if (!IS_ENABLED(DEBUG_FS))
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
return 0;
n = snprintf(d->dfs_dir_name, UBI_DFS_DIR_LEN + 1, UBI_DFS_DIR_NAME,
@@ -477,6 +477,6 @@
*/
void ubi_debugfs_exit_dev(struct ubi_device *ubi)
{
- if (IS_ENABLED(DEBUG_FS))
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
debugfs_remove_recursive(ubi->dbg->dfs_dir);
}
diff --git a/drivers/mtd/ubi/misc.c b/drivers/mtd/ubi/misc.c
index f6a7d7a..8bbfb44 100644
--- a/drivers/mtd/ubi/misc.c
+++ b/drivers/mtd/ubi/misc.c
@@ -92,7 +92,30 @@
}
/**
- * ubi_calculate_rsvd_pool - calculate how many PEBs must be reserved for bad
+ * ubi_update_reserved - update bad eraseblock handling accounting data.
+ * @ubi: UBI device description object
+ *
+ * This function calculates the gap between current number of PEBs reserved for
+ * bad eraseblock handling and the required level of PEBs that must be
+ * reserved, and if necessary, reserves more PEBs to fill that gap, according
+ * to availability. Should be called with ubi->volumes_lock held.
+ */
+void ubi_update_reserved(struct ubi_device *ubi)
+{
+ int need = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
+
+ if (need <= 0 || ubi->avail_pebs == 0)
+ return;
+
+ need = min_t(int, need, ubi->avail_pebs);
+ ubi->avail_pebs -= need;
+ ubi->rsvd_pebs += need;
+ ubi->beb_rsvd_pebs += need;
+ ubi_msg("reserved more %d PEBs for bad PEB handling", need);
+}
+
+/**
+ * ubi_calculate_reserved - calculate how many PEBs must be reserved for bad
* eraseblock handling.
* @ubi: UBI device description object
*/
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index a1a81c9..84f66e3 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -647,6 +647,7 @@
int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf,
int length);
int ubi_check_volume(struct ubi_device *ubi, int vol_id);
+void ubi_update_reserved(struct ubi_device *ubi);
void ubi_calculate_reserved(struct ubi_device *ubi);
int ubi_check_pattern(const void *buf, uint8_t patt, int size);
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index 0669cff..9169e58 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -443,15 +443,7 @@
spin_lock(&ubi->volumes_lock);
ubi->rsvd_pebs -= reserved_pebs;
ubi->avail_pebs += reserved_pebs;
- i = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
- if (i > 0) {
- i = ubi->avail_pebs >= i ? i : ubi->avail_pebs;
- ubi->avail_pebs -= i;
- ubi->rsvd_pebs += i;
- ubi->beb_rsvd_pebs += i;
- if (i > 0)
- ubi_msg("reserve more %d PEBs", i);
- }
+ ubi_update_reserved(ubi);
ubi->vol_count -= 1;
spin_unlock(&ubi->volumes_lock);
@@ -558,15 +550,7 @@
spin_lock(&ubi->volumes_lock);
ubi->rsvd_pebs += pebs;
ubi->avail_pebs -= pebs;
- pebs = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
- if (pebs > 0) {
- pebs = ubi->avail_pebs >= pebs ? pebs : ubi->avail_pebs;
- ubi->avail_pebs -= pebs;
- ubi->rsvd_pebs += pebs;
- ubi->beb_rsvd_pebs += pebs;
- if (pebs > 0)
- ubi_msg("reserve more %d PEBs", pebs);
- }
+ ubi_update_reserved(ubi);
for (i = 0; i < reserved_pebs; i++)
new_mapping[i] = vol->eba_tbl[i];
kfree(vol->eba_tbl);
diff --git a/drivers/net/bonding/bond_debugfs.c b/drivers/net/bonding/bond_debugfs.c
index 3680aa2..2cf084e 100644
--- a/drivers/net/bonding/bond_debugfs.c
+++ b/drivers/net/bonding/bond_debugfs.c
@@ -6,7 +6,7 @@
#include "bonding.h"
#include "bond_alb.h"
-#ifdef CONFIG_DEBUG_FS
+#if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_NET_NS)
#include <linux/debugfs.h>
#include <linux/seq_file.h>
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 2ee8cf9..2ee7699 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -76,6 +76,7 @@
#include <net/route.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
+#include <net/pkt_sched.h>
#include "bonding.h"
#include "bond_3ad.h"
#include "bond_alb.h"
@@ -381,8 +382,6 @@
return next;
}
-#define bond_queue_mapping(skb) (*(u16 *)((skb)->cb))
-
/**
* bond_dev_queue_xmit - Prepare skb for xmit.
*
@@ -395,7 +394,9 @@
{
skb->dev = slave_dev;
- skb->queue_mapping = bond_queue_mapping(skb);
+ BUILD_BUG_ON(sizeof(skb->queue_mapping) !=
+ sizeof(qdisc_skb_cb(skb)->bond_queue_mapping));
+ skb->queue_mapping = qdisc_skb_cb(skb)->bond_queue_mapping;
if (unlikely(netpoll_tx_running(slave_dev)))
bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb);
@@ -3226,6 +3227,12 @@
switch (event) {
case NETDEV_CHANGENAME:
return bond_event_changename(event_bond);
+ case NETDEV_UNREGISTER:
+ bond_remove_proc_entry(event_bond);
+ break;
+ case NETDEV_REGISTER:
+ bond_create_proc_entry(event_bond);
+ break;
default:
break;
}
@@ -4171,7 +4178,7 @@
/*
* Save the original txq to restore before passing to the driver
*/
- bond_queue_mapping(skb) = skb->queue_mapping;
+ qdisc_skb_cb(skb)->bond_queue_mapping = skb->queue_mapping;
if (unlikely(txq >= dev->real_num_tx_queues)) {
do {
@@ -4410,8 +4417,6 @@
bond_work_cancel_all(bond);
- bond_remove_proc_entry(bond);
-
bond_debug_unregister(bond);
__hw_addr_flush(&bond->mc_list);
@@ -4813,7 +4818,6 @@
bond_set_lockdep_class(bond_dev);
- bond_create_proc_entry(bond);
list_add_tail(&bond->bond_list, &bn->dev_list);
bond_prepare_sysfs_group(bond);
diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c
index ad284ba..3cea38d 100644
--- a/drivers/net/bonding/bond_procfs.c
+++ b/drivers/net/bonding/bond_procfs.c
@@ -150,14 +150,25 @@
}
}
+static const char *bond_slave_link_status(s8 link)
+{
+ static const char * const status[] = {
+ [BOND_LINK_UP] = "up",
+ [BOND_LINK_FAIL] = "going down",
+ [BOND_LINK_DOWN] = "down",
+ [BOND_LINK_BACK] = "going back",
+ };
+
+ return status[link];
+}
+
static void bond_info_show_slave(struct seq_file *seq,
const struct slave *slave)
{
struct bonding *bond = seq->private;
seq_printf(seq, "\nSlave Interface: %s\n", slave->dev->name);
- seq_printf(seq, "MII Status: %s\n",
- (slave->link == BOND_LINK_UP) ? "up" : "down");
+ seq_printf(seq, "MII Status: %s\n", bond_slave_link_status(slave->link));
if (slave->speed == SPEED_UNKNOWN)
seq_printf(seq, "Speed: %s\n", "Unknown");
else
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index aef42f0..485bedb 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -1082,8 +1082,12 @@
}
}
- pr_info("%s: Unable to set %.*s as primary slave.\n",
- bond->dev->name, (int)strlen(buf) - 1, buf);
+ strncpy(bond->params.primary, ifname, IFNAMSIZ);
+ bond->params.primary[IFNAMSIZ - 1] = 0;
+
+ pr_info("%s: Recording %s as primary, "
+ "but it has not been enslaved to %s yet.\n",
+ bond->dev->name, ifname, bond->dev->name);
out:
write_unlock_bh(&bond->curr_slave_lock);
read_unlock(&bond->lock);
diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c
index 1520814..4a27adb 100644
--- a/drivers/net/caif/caif_hsi.c
+++ b/drivers/net/caif/caif_hsi.c
@@ -693,8 +693,6 @@
*/
memcpy(rx_buf, (u8 *)piggy_desc,
CFHSI_DESC_SHORT_SZ);
- /* Mark no embedded frame here */
- piggy_desc->offset = 0;
if (desc_pld_len == -EPROTO)
goto out_of_sync;
}
@@ -737,6 +735,8 @@
/* Extract any payload in piggyback descriptor. */
if (cfhsi_rx_desc(piggy_desc, cfhsi) < 0)
goto out_of_sync;
+ /* Mark no embedded frame after extracting it */
+ piggy_desc->offset = 0;
}
}
@@ -1178,6 +1178,7 @@
dev_err(&ndev->dev, "%s: Registration error: %d.\n",
__func__, res);
free_netdev(ndev);
+ return -ENODEV;
}
/* Add CAIF HSI device to list. */
spin_lock(&cfhsi_list_lock);
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 536bda0..86cd532 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -590,8 +590,8 @@
priv->write_reg(priv, &priv->regs->control,
CONTROL_ENABLE_AR);
- if (priv->can.ctrlmode & (CAN_CTRLMODE_LISTENONLY &
- CAN_CTRLMODE_LOOPBACK)) {
+ if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) &&
+ (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) {
/* loopback + silent mode : useful for hot self-test */
priv->write_reg(priv, &priv->regs->control, CONTROL_EIE |
CONTROL_SIE | CONTROL_IE | CONTROL_TEST);
@@ -686,7 +686,7 @@
*
* We iterate from priv->tx_echo to priv->tx_next and check if the
* packet has been transmitted, echo it back to the CAN framework.
- * If we discover a not yet transmitted package, stop looking for more.
+ * If we discover a not yet transmitted packet, stop looking for more.
*/
static void c_can_do_tx(struct net_device *dev)
{
@@ -698,7 +698,7 @@
for (/* nix */; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) {
msg_obj_no = get_tx_echo_msg_obj(priv);
val = c_can_read_reg32(priv, &priv->regs->txrqst1);
- if (!(val & (1 << msg_obj_no))) {
+ if (!(val & (1 << (msg_obj_no - 1)))) {
can_get_echo_skb(dev,
msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST);
stats->tx_bytes += priv->read_reg(priv,
@@ -706,6 +706,8 @@
& IF_MCONT_DLC_MASK;
stats->tx_packets++;
c_can_inval_msg_object(dev, 0, msg_obj_no);
+ } else {
+ break;
}
}
@@ -950,7 +952,7 @@
struct net_device *dev = napi->dev;
struct c_can_priv *priv = netdev_priv(dev);
- irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+ irqstatus = priv->irqstatus;
if (!irqstatus)
goto end;
@@ -1028,12 +1030,11 @@
static irqreturn_t c_can_isr(int irq, void *dev_id)
{
- u16 irqstatus;
struct net_device *dev = (struct net_device *)dev_id;
struct c_can_priv *priv = netdev_priv(dev);
- irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
- if (!irqstatus)
+ priv->irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+ if (!priv->irqstatus)
return IRQ_NONE;
/* disable all interrupts and schedule the NAPI */
@@ -1063,10 +1064,11 @@
goto exit_irq_fail;
}
+ napi_enable(&priv->napi);
+
/* start the c_can controller */
c_can_start(dev);
- napi_enable(&priv->napi);
netif_start_queue(dev);
return 0;
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index 9b7fbef..5f32d34 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -76,6 +76,7 @@
unsigned int tx_next;
unsigned int tx_echo;
void *priv; /* for board-specific data */
+ u16 irqstatus;
};
struct net_device *alloc_c_can_dev(void);
diff --git a/drivers/net/can/cc770/cc770_platform.c b/drivers/net/can/cc770/cc770_platform.c
index 53115ee..688371c 100644
--- a/drivers/net/can/cc770/cc770_platform.c
+++ b/drivers/net/can/cc770/cc770_platform.c
@@ -154,7 +154,7 @@
struct cc770_platform_data *pdata = pdev->dev.platform_data;
priv->can.clock.freq = pdata->osc_freq;
- if (priv->cpu_interface | CPUIF_DSC)
+ if (priv->cpu_interface & CPUIF_DSC)
priv->can.clock.freq /= 2;
priv->clkout = pdata->cor;
priv->bus_config = pdata->bcr;
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 38c0690..81d4741 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -939,12 +939,12 @@
return PTR_ERR(pinctrl);
if (pdev->dev.of_node) {
- const u32 *clock_freq_p;
+ const __be32 *clock_freq_p;
clock_freq_p = of_get_property(pdev->dev.of_node,
"clock-frequency", NULL);
if (clock_freq_p)
- clock_freq = *clock_freq_p;
+ clock_freq = be32_to_cpup(clock_freq_p);
}
if (!clock_freq) {
diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c
index 442d91a..bab0158 100644
--- a/drivers/net/dummy.c
+++ b/drivers/net/dummy.c
@@ -187,8 +187,10 @@
rtnl_lock();
err = __rtnl_link_register(&dummy_link_ops);
- for (i = 0; i < numdummies && !err; i++)
+ for (i = 0; i < numdummies && !err; i++) {
err = dummy_init_one();
+ cond_resched();
+ }
if (err < 0)
__rtnl_link_unregister(&dummy_link_ops);
rtnl_unlock();
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 9cc1570..1f78b63d 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -261,7 +261,6 @@
if ((phy_data & BMSR_LSTATUS) == 0) {
/* link down */
netif_carrier_off(netdev);
- netif_stop_queue(netdev);
hw->hibernate = true;
if (atl1c_reset_mac(hw) != 0)
if (netif_msg_hw(adapter))
diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c
index 46b8b7d..d09c6b5 100644
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -656,7 +656,7 @@
dma_unmap_single(bp->sdev->dma_dev, mapping,
RX_PKT_BUF_SZ, DMA_FROM_DEVICE);
dev_kfree_skb_any(skb);
- skb = __netdev_alloc_skb(bp->dev, RX_PKT_BUF_SZ, GFP_ATOMIC|GFP_DMA);
+ skb = alloc_skb(RX_PKT_BUF_SZ, GFP_ATOMIC | GFP_DMA);
if (skb == NULL)
return -ENOMEM;
mapping = dma_map_single(bp->sdev->dma_dev, skb->data,
@@ -967,7 +967,7 @@
dma_unmap_single(bp->sdev->dma_dev, mapping, len,
DMA_TO_DEVICE);
- bounce_skb = __netdev_alloc_skb(dev, len, GFP_ATOMIC | GFP_DMA);
+ bounce_skb = alloc_skb(len, GFP_ATOMIC | GFP_DMA);
if (!bounce_skb)
goto err_out;
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index ac7b744..1fa4927 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -5372,7 +5372,7 @@
int k, last;
if (skb == NULL) {
- j++;
+ j = NEXT_TX_BD(j);
continue;
}
@@ -5384,8 +5384,8 @@
tx_buf->skb = NULL;
last = tx_buf->nr_frags;
- j++;
- for (k = 0; k < last; k++, j++) {
+ j = NEXT_TX_BD(j);
+ for (k = 0; k < last; k++, j = NEXT_TX_BD(j)) {
tx_buf = &txr->tx_buf_ring[TX_RING_IDX(j)];
dma_unmap_page(&bp->pdev->dev,
dma_unmap_addr(tx_buf, mapping),
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index e30e2a2..7de8241 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -747,21 +747,6 @@
#define ETH_RX_ERROR_FALGS ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG
-#define BNX2X_IP_CSUM_ERR(cqe) \
- (!((cqe)->fast_path_cqe.status_flags & \
- ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG) && \
- ((cqe)->fast_path_cqe.type_error_flags & \
- ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG))
-
-#define BNX2X_L4_CSUM_ERR(cqe) \
- (!((cqe)->fast_path_cqe.status_flags & \
- ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG) && \
- ((cqe)->fast_path_cqe.type_error_flags & \
- ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG))
-
-#define BNX2X_RX_CSUM_OK(cqe) \
- (!(BNX2X_L4_CSUM_ERR(cqe) || BNX2X_IP_CSUM_ERR(cqe)))
-
#define BNX2X_PRS_FLAG_OVERETH_IPV4(flags) \
(((le16_to_cpu(flags) & \
PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) >> \
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index ad0743b..8098eea 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -190,7 +190,7 @@
if ((netif_tx_queue_stopped(txq)) &&
(bp->state == BNX2X_STATE_OPEN) &&
- (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3))
+ (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4))
netif_tx_wake_queue(txq);
__netif_tx_unlock(txq);
@@ -617,6 +617,25 @@
return 0;
}
+static void bnx2x_csum_validate(struct sk_buff *skb, union eth_rx_cqe *cqe,
+ struct bnx2x_fastpath *fp)
+{
+ /* Do nothing if no IP/L4 csum validation was done */
+
+ if (cqe->fast_path_cqe.status_flags &
+ (ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG |
+ ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG))
+ return;
+
+ /* If both IP/L4 validation were done, check if an error was found. */
+
+ if (cqe->fast_path_cqe.type_error_flags &
+ (ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG |
+ ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG))
+ fp->eth_q_stats.hw_csum_err++;
+ else
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+}
int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
{
@@ -806,13 +825,9 @@
skb_checksum_none_assert(skb);
- if (bp->dev->features & NETIF_F_RXCSUM) {
+ if (bp->dev->features & NETIF_F_RXCSUM)
+ bnx2x_csum_validate(skb, cqe, fp);
- if (likely(BNX2X_RX_CSUM_OK(cqe)))
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- else
- fp->eth_q_stats.hw_csum_err++;
- }
skb_record_rx_queue(skb, fp->rx_queue);
@@ -2501,8 +2516,6 @@
/* we split the first BD into headers and data BDs
* to ease the pain of our fellow microcode engineers
* we use one mapping for both BDs
- * So far this has only been observed to happen
- * in Other Operating Systems(TM)
*/
static noinline u16 bnx2x_tx_split(struct bnx2x *bp,
struct bnx2x_fp_txdata *txdata,
@@ -3156,7 +3169,7 @@
txdata->tx_bd_prod += nbd;
- if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 3)) {
+ if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 4)) {
netif_tx_stop_queue(txq);
/* paired memory barrier is in bnx2x_tx_int(), we have to keep
@@ -3165,7 +3178,7 @@
smp_mb();
fp->eth_q_stats.driver_xoff++;
- if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3)
+ if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4)
netif_tx_wake_queue(txq);
}
txdata->tx_pkt++;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index a3fb721..6e7d5c0 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -40,6 +40,7 @@
#define I2C_BSC0 0
#define I2C_BSC1 1
#define I2C_WA_RETRY_CNT 3
+#define I2C_WA_PWR_ITER (I2C_WA_RETRY_CNT - 1)
#define MCPR_IMC_COMMAND_READ_OP 1
#define MCPR_IMC_COMMAND_WRITE_OP 2
@@ -7659,6 +7660,28 @@
return -EINVAL;
}
+static void bnx2x_warpcore_power_module(struct link_params *params,
+ struct bnx2x_phy *phy,
+ u8 power)
+{
+ u32 pin_cfg;
+ struct bnx2x *bp = params->bp;
+
+ pin_cfg = (REG_RD(bp, params->shmem_base +
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[params->port].e3_sfp_ctrl)) &
+ PORT_HW_CFG_E3_PWR_DIS_MASK) >>
+ PORT_HW_CFG_E3_PWR_DIS_SHIFT;
+
+ if (pin_cfg == PIN_CFG_NA)
+ return;
+ DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n",
+ power, pin_cfg);
+ /* Low ==> corresponding SFP+ module is powered
+ * high ==> the SFP+ module is powered down
+ */
+ bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1);
+}
static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
struct link_params *params,
u16 addr, u8 byte_cnt,
@@ -7678,6 +7701,12 @@
/* 4 byte aligned address */
addr32 = addr & (~0x3);
do {
+ if (cnt == I2C_WA_PWR_ITER) {
+ bnx2x_warpcore_power_module(params, phy, 0);
+ /* Note that 100us are not enough here */
+ usleep_range(1000,1000);
+ bnx2x_warpcore_power_module(params, phy, 1);
+ }
rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt,
data_array);
} while ((rc != 0) && (++cnt < I2C_WA_RETRY_CNT));
@@ -8200,29 +8229,6 @@
bnx2x_set_e1e2_module_fault_led(params, gpio_mode);
}
-static void bnx2x_warpcore_power_module(struct link_params *params,
- struct bnx2x_phy *phy,
- u8 power)
-{
- u32 pin_cfg;
- struct bnx2x *bp = params->bp;
-
- pin_cfg = (REG_RD(bp, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[params->port].e3_sfp_ctrl)) &
- PORT_HW_CFG_E3_PWR_DIS_MASK) >>
- PORT_HW_CFG_E3_PWR_DIS_SHIFT;
-
- if (pin_cfg == PIN_CFG_NA)
- return;
- DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n",
- power, pin_cfg);
- /* Low ==> corresponding SFP+ module is powered
- * high ==> the SFP+ module is powered down
- */
- bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1);
-}
-
static void bnx2x_warpcore_hw_reset(struct bnx2x_phy *phy,
struct link_params *params)
{
@@ -9748,7 +9754,7 @@
msleep(1);
- if (!(CHIP_IS_E1(bp)))
+ if (!(CHIP_IS_E1x(bp)))
port = BP_PATH(bp);
else
port = params->port;
diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c
index c95e7b5..2c89d17 100644
--- a/drivers/net/ethernet/broadcom/cnic.c
+++ b/drivers/net/ethernet/broadcom/cnic.c
@@ -534,7 +534,8 @@
}
if (atomic_read(&ulp_ops->ref_count) != 0)
- netdev_warn(dev->netdev, "Failed waiting for ref count to go to zero\n");
+ pr_warn("%s: Failed waiting for ref count to go to zero\n",
+ __func__);
return 0;
out_unlock:
@@ -1053,12 +1054,13 @@
uinfo = &udev->cnic_uinfo;
- uinfo->mem[0].addr = dev->netdev->base_addr;
+ uinfo->mem[0].addr = pci_resource_start(dev->pcidev, 0);
uinfo->mem[0].internal_addr = dev->regview;
- uinfo->mem[0].size = dev->netdev->mem_end - dev->netdev->mem_start;
uinfo->mem[0].memtype = UIO_MEM_PHYS;
if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) {
+ uinfo->mem[0].size = MB_GET_CID_ADDR(TX_TSS_CID +
+ TX_MAX_TSS_RINGS + 1);
uinfo->mem[1].addr = (unsigned long) cp->status_blk.gen &
PAGE_MASK;
if (cp->ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX)
@@ -1068,6 +1070,8 @@
uinfo->name = "bnx2_cnic";
} else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) {
+ uinfo->mem[0].size = pci_resource_len(dev->pcidev, 0);
+
uinfo->mem[1].addr = (unsigned long) cp->bnx2x_def_status_blk &
PAGE_MASK;
uinfo->mem[1].size = sizeof(*cp->bnx2x_def_status_blk);
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index edeeb51..e47ff8b 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -14275,7 +14275,8 @@
}
}
- if (tg3_flag(tp, 5755_PLUS))
+ if (tg3_flag(tp, 5755_PLUS) ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
tg3_flag_set(tp, SHORT_DMA_BUG);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 8d06ea3..921c208 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -122,15 +122,15 @@
goto done;
if (compl_status == MCC_STATUS_UNAUTHORIZED_REQUEST) {
- dev_warn(&adapter->pdev->dev, "This domain(VM) is not "
- "permitted to execute this cmd (opcode %d)\n",
- opcode);
+ dev_warn(&adapter->pdev->dev,
+ "opcode %d-%d is not permitted\n",
+ opcode, subsystem);
} else {
extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
CQE_STATUS_EXTD_MASK;
- dev_err(&adapter->pdev->dev, "Cmd (opcode %d) failed:"
- "status %d, extd-status %d\n",
- opcode, compl_status, extd_status);
+ dev_err(&adapter->pdev->dev,
+ "opcode %d-%d failed:status %d-%d\n",
+ opcode, subsystem, compl_status, extd_status);
}
}
done:
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index 9625bf4..b3f3fc3 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -1566,7 +1566,7 @@
u32 rsvd0[BE_TXP_SW_SZ];
struct be_erx_stats_v1 erx;
struct be_pmem_stats pmem;
- u32 rsvd1[3];
+ u32 rsvd1[18];
};
struct be_cmd_req_get_stats_v1 {
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 08efd30..501dfa9 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -736,6 +736,8 @@
copied = make_tx_wrbs(adapter, txq, skb, wrb_cnt, dummy_wrb);
if (copied) {
+ int gso_segs = skb_shinfo(skb)->gso_segs;
+
/* record the sent skb in the sent_skb table */
BUG_ON(txo->sent_skb_list[start]);
txo->sent_skb_list[start] = skb;
@@ -753,8 +755,7 @@
be_txq_notify(adapter, txq->id, wrb_cnt);
- be_tx_stats_update(txo, wrb_cnt, copied,
- skb_shinfo(skb)->gso_segs, stopped);
+ be_tx_stats_update(txo, wrb_cnt, copied, gso_segs, stopped);
} else {
txq->head = start;
dev_kfree_skb_any(skb);
@@ -3236,7 +3237,7 @@
netdev->flags |= IFF_MULTICAST;
- netif_set_gso_max_size(netdev, 65535);
+ netif_set_gso_max_size(netdev, 65535 - ETH_HLEN);
netdev->netdev_ops = &be_netdev_ops;
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 0741ade..ab1d80f 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1804,18 +1804,16 @@
if (priv->mode == MQ_MG_MODE) {
baddr = ®s->txic0;
for_each_set_bit(i, &tx_mask, priv->num_tx_queues) {
- if (likely(priv->tx_queue[i]->txcoalescing)) {
- gfar_write(baddr + i, 0);
+ gfar_write(baddr + i, 0);
+ if (likely(priv->tx_queue[i]->txcoalescing))
gfar_write(baddr + i, priv->tx_queue[i]->txic);
- }
}
baddr = ®s->rxic0;
for_each_set_bit(i, &rx_mask, priv->num_rx_queues) {
- if (likely(priv->rx_queue[i]->rxcoalescing)) {
- gfar_write(baddr + i, 0);
+ gfar_write(baddr + i, 0);
+ if (likely(priv->rx_queue[i]->rxcoalescing))
gfar_write(baddr + i, priv->rx_queue[i]->rxic);
- }
}
}
}
@@ -2065,10 +2063,9 @@
return NETDEV_TX_OK;
}
- /* Steal sock reference for processing TX time stamps */
- swap(skb_new->sk, skb->sk);
- swap(skb_new->destructor, skb->destructor);
- kfree_skb(skb);
+ if (skb->sk)
+ skb_set_owner_w(skb_new, skb->sk);
+ consume_skb(skb);
skb = skb_new;
}
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 79b07ec..0cafe4f 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -122,8 +122,10 @@
config IGB_PTP
bool "PTP Hardware Clock (PHC)"
- default y
- depends on IGB && PTP_1588_CLOCK
+ default n
+ depends on IGB && EXPERIMENTAL
+ select PPS
+ select PTP_1588_CLOCK
---help---
Say Y here if you want to use PTP Hardware Clock (PHC) in the
driver. Only the basic clock operations have been implemented.
@@ -223,7 +225,9 @@
config IXGBE_PTP
bool "PTP Clock Support"
default n
- depends on IXGBE && PTP_1588_CLOCK
+ depends on IXGBE && EXPERIMENTAL
+ select PPS
+ select PTP_1588_CLOCK
---help---
Say Y here if you want support for 1588 Timestamping with a
PHC device, using the PTP 1588 Clock support. This is
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index 36db4df..1f063dc 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -1572,6 +1572,9 @@
ctrl = er32(CTRL);
status = er32(STATUS);
rxcw = er32(RXCW);
+ /* SYNCH bit and IV bit are sticky */
+ udelay(10);
+ rxcw = er32(RXCW);
if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) {
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index 351a409..76edbc1 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -103,6 +103,7 @@
#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index d863075..905e214 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -258,7 +258,8 @@
* When SoL/IDER sessions are active, autoneg/speed/duplex
* cannot be changed
*/
- if (hw->phy.ops.check_reset_block(hw)) {
+ if (hw->phy.ops.check_reset_block &&
+ hw->phy.ops.check_reset_block(hw)) {
e_err("Cannot change link characteristics when SoL/IDER is active.\n");
return -EINVAL;
}
@@ -1615,7 +1616,8 @@
* PHY loopback cannot be performed if SoL/IDER
* sessions are active
*/
- if (hw->phy.ops.check_reset_block(hw)) {
+ if (hw->phy.ops.check_reset_block &&
+ hw->phy.ops.check_reset_block(hw)) {
e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
*data = 0;
goto out;
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 238ab2f..e3a7b07 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -325,24 +325,46 @@
**/
static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw)
{
- u16 phy_reg;
- u32 phy_id;
+ u16 phy_reg = 0;
+ u32 phy_id = 0;
+ s32 ret_val;
+ u16 retry_count;
- e1e_rphy_locked(hw, PHY_ID1, &phy_reg);
- phy_id = (u32)(phy_reg << 16);
- e1e_rphy_locked(hw, PHY_ID2, &phy_reg);
- phy_id |= (u32)(phy_reg & PHY_REVISION_MASK);
+ for (retry_count = 0; retry_count < 2; retry_count++) {
+ ret_val = e1e_rphy_locked(hw, PHY_ID1, &phy_reg);
+ if (ret_val || (phy_reg == 0xFFFF))
+ continue;
+ phy_id = (u32)(phy_reg << 16);
+
+ ret_val = e1e_rphy_locked(hw, PHY_ID2, &phy_reg);
+ if (ret_val || (phy_reg == 0xFFFF)) {
+ phy_id = 0;
+ continue;
+ }
+ phy_id |= (u32)(phy_reg & PHY_REVISION_MASK);
+ break;
+ }
if (hw->phy.id) {
if (hw->phy.id == phy_id)
return true;
- } else {
- if ((phy_id != 0) && (phy_id != PHY_REVISION_MASK))
- hw->phy.id = phy_id;
+ } else if (phy_id) {
+ hw->phy.id = phy_id;
+ hw->phy.revision = (u32)(phy_reg & ~PHY_REVISION_MASK);
return true;
}
- return false;
+ /*
+ * In case the PHY needs to be in mdio slow mode,
+ * set slow mode and try to get the PHY id again.
+ */
+ hw->phy.ops.release(hw);
+ ret_val = e1000_set_mdio_slow_mode_hv(hw);
+ if (!ret_val)
+ ret_val = e1000e_get_phy_id(hw);
+ hw->phy.ops.acquire(hw);
+
+ return !ret_val;
}
/**
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index 026e8b3..a134399 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -709,7 +709,7 @@
* In the case of the phy reset being blocked, we already have a link.
* We do not need to set it up again.
*/
- if (hw->phy.ops.check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
return 0;
/*
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index a4b0435..623e30b 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -496,7 +496,7 @@
* @sk_buff: socket buffer with received data
**/
static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
- __le16 csum, struct sk_buff *skb)
+ struct sk_buff *skb)
{
u16 status = (u16)status_err;
u8 errors = (u8)(status_err >> 24);
@@ -511,8 +511,8 @@
if (status & E1000_RXD_STAT_IXSM)
return;
- /* TCP/UDP checksum error bit is set */
- if (errors & E1000_RXD_ERR_TCPE) {
+ /* TCP/UDP checksum error bit or IP checksum error bit is set */
+ if (errors & (E1000_RXD_ERR_TCPE | E1000_RXD_ERR_IPE)) {
/* let the stack verify checksum errors */
adapter->hw_csum_err++;
return;
@@ -523,19 +523,7 @@
return;
/* It must be a TCP or UDP packet with a valid checksum */
- if (status & E1000_RXD_STAT_TCPCS) {
- /* TCP checksum is good */
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- } else {
- /*
- * IP fragment with UDP payload
- * Hardware complements the payload checksum, so we undo it
- * and then put the value in host order for further stack use.
- */
- __sum16 sum = (__force __sum16)swab16((__force u16)csum);
- skb->csum = csum_unfold(~sum);
- skb->ip_summed = CHECKSUM_COMPLETE;
- }
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
adapter->hw_csum_good++;
}
@@ -954,8 +942,7 @@
skb_put(skb, length);
/* Receive Checksum Offload */
- e1000_rx_checksum(adapter, staterr,
- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ e1000_rx_checksum(adapter, staterr, skb);
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
@@ -1341,8 +1328,7 @@
total_rx_bytes += skb->len;
total_rx_packets++;
- e1000_rx_checksum(adapter, staterr,
- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ e1000_rx_checksum(adapter, staterr, skb);
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
@@ -1512,9 +1498,8 @@
}
}
- /* Receive Checksum Offload XXX recompute due to CRC strip? */
- e1000_rx_checksum(adapter, staterr,
- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ /* Receive Checksum Offload */
+ e1000_rx_checksum(adapter, staterr, skb);
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
@@ -3098,19 +3083,10 @@
/* Enable Receive Checksum Offload for TCP and UDP */
rxcsum = er32(RXCSUM);
- if (adapter->netdev->features & NETIF_F_RXCSUM) {
+ if (adapter->netdev->features & NETIF_F_RXCSUM)
rxcsum |= E1000_RXCSUM_TUOFL;
-
- /*
- * IPv4 payload checksum for UDP fragments must be
- * used in conjunction with packet-split.
- */
- if (adapter->rx_ps_pages)
- rxcsum |= E1000_RXCSUM_IPPCSE;
- } else {
+ else
rxcsum &= ~E1000_RXCSUM_TUOFL;
- /* no need to clear IPPCSE as it defaults to 0 */
- }
ew32(RXCSUM, rxcsum);
if (adapter->hw.mac.type == e1000_pch2lan) {
@@ -5241,22 +5217,10 @@
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
/* Jumbo frame support */
- if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
- if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
- e_err("Jumbo Frames not supported.\n");
- return -EINVAL;
- }
-
- /*
- * IP payload checksum (enabled with jumbos/packet-split when
- * Rx checksum is enabled) and generation of RSS hash is
- * mutually exclusive in the hardware.
- */
- if ((netdev->features & NETIF_F_RXCSUM) &&
- (netdev->features & NETIF_F_RXHASH)) {
- e_err("Jumbo frames cannot be enabled when both receive checksum offload and receive hashing are enabled. Disable one of the receive offload features before enabling jumbos.\n");
- return -EINVAL;
- }
+ if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
+ !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
+ e_err("Jumbo Frames not supported.\n");
+ return -EINVAL;
}
/* Supported frame sizes */
@@ -6030,17 +5994,6 @@
NETIF_F_RXALL)))
return 0;
- /*
- * IP payload checksum (enabled with jumbos/packet-split when Rx
- * checksum is enabled) and generation of RSS hash is mutually
- * exclusive in the hardware.
- */
- if (adapter->rx_ps_pages &&
- (features & NETIF_F_RXCSUM) && (features & NETIF_F_RXHASH)) {
- e_err("Enabling both receive checksum offload and receive hashing is not possible with jumbo frames. Disable jumbos or enable only one of the receive offload features.\n");
- return -EINVAL;
- }
-
if (changed & NETIF_F_RXFCS) {
if (features & NETIF_F_RXFCS) {
adapter->flags2 &= ~FLAG2_CRC_STRIPPING;
@@ -6237,7 +6190,7 @@
adapter->hw.phy.ms_type = e1000_ms_hw_default;
}
- if (hw->phy.ops.check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
e_info("PHY reset is blocked due to SOL/IDER session.\n");
/* Set initial default active device features */
@@ -6404,7 +6357,7 @@
if (!(adapter->flags & FLAG_HAS_AMT))
e1000e_release_hw_control(adapter);
err_eeprom:
- if (!hw->phy.ops.check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block && !hw->phy.ops.check_reset_block(hw))
e1000_phy_hw_reset(&adapter->hw);
err_hw_init:
kfree(adapter->tx_ring);
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index 0334d01..b860d4f 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -2155,9 +2155,11 @@
s32 ret_val;
u32 ctrl;
- ret_val = phy->ops.check_reset_block(hw);
- if (ret_val)
- return 0;
+ if (phy->ops.check_reset_block) {
+ ret_val = phy->ops.check_reset_block(hw);
+ if (ret_val)
+ return 0;
+ }
ret_val = phy->ops.acquire(hw);
if (ret_val)
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index e650839..5e84eaa 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -206,8 +206,6 @@
mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
break;
case e1000_i350:
- case e1000_i210:
- case e1000_i211:
mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
break;
default:
diff --git a/drivers/net/ethernet/intel/igbvf/ethtool.c b/drivers/net/ethernet/intel/igbvf/ethtool.c
index 8ce6706..90eef07 100644
--- a/drivers/net/ethernet/intel/igbvf/ethtool.c
+++ b/drivers/net/ethernet/intel/igbvf/ethtool.c
@@ -357,21 +357,28 @@
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- if ((ec->rx_coalesce_usecs > IGBVF_MAX_ITR_USECS) ||
- ((ec->rx_coalesce_usecs > 3) &&
- (ec->rx_coalesce_usecs < IGBVF_MIN_ITR_USECS)) ||
- (ec->rx_coalesce_usecs == 2))
- return -EINVAL;
-
- /* convert to rate of irq's per second */
- if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) {
- adapter->current_itr = IGBVF_START_ITR;
- adapter->requested_itr = ec->rx_coalesce_usecs;
- } else {
+ if ((ec->rx_coalesce_usecs >= IGBVF_MIN_ITR_USECS) &&
+ (ec->rx_coalesce_usecs <= IGBVF_MAX_ITR_USECS)) {
adapter->current_itr = ec->rx_coalesce_usecs << 2;
adapter->requested_itr = 1000000000 /
(adapter->current_itr * 256);
- }
+ } else if ((ec->rx_coalesce_usecs == 3) ||
+ (ec->rx_coalesce_usecs == 2)) {
+ adapter->current_itr = IGBVF_START_ITR;
+ adapter->requested_itr = ec->rx_coalesce_usecs;
+ } else if (ec->rx_coalesce_usecs == 0) {
+ /*
+ * The user's desire is to turn off interrupt throttling
+ * altogether, but due to HW limitations, we can't do that.
+ * Instead we set a very small value in EITR, which would
+ * allow ~967k interrupts per second, but allow the adapter's
+ * internal clocking to still function properly.
+ */
+ adapter->current_itr = 4;
+ adapter->requested_itr = 1000000000 /
+ (adapter->current_itr * 256);
+ } else
+ return -EINVAL;
writel(adapter->current_itr,
hw->hw_addr + adapter->rx_ring->itr_register);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index 3ef3c52..7af291e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -196,7 +196,7 @@
__IXGBE_HANG_CHECK_ARMED,
__IXGBE_RX_RSC_ENABLED,
__IXGBE_RX_CSUM_UDP_ZERO_ERR,
- __IXGBE_RX_FCOE_BUFSZ,
+ __IXGBE_RX_FCOE,
};
#define check_for_tx_hang(ring) \
@@ -290,7 +290,7 @@
#if defined(IXGBE_FCOE) && (PAGE_SIZE < 8192)
static inline unsigned int ixgbe_rx_pg_order(struct ixgbe_ring *ring)
{
- return test_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state) ? 1 : 0;
+ return test_bit(__IXGBE_RX_FCOE, &ring->state) ? 1 : 0;
}
#else
#define ixgbe_rx_pg_order(_ring) 0
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
index af1a531..c377706 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
@@ -634,7 +634,7 @@
f = &adapter->ring_feature[RING_F_FCOE];
if ((rxr_idx >= f->mask) &&
(rxr_idx < f->mask + f->indices))
- set_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state);
+ set_bit(__IXGBE_RX_FCOE, &ring->state);
}
#endif /* IXGBE_FCOE */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index bf20457..e242104 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1058,17 +1058,17 @@
#ifdef IXGBE_FCOE
/**
* ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type
- * @adapter: address of board private structure
+ * @ring: structure containing ring specific data
* @rx_desc: advanced rx descriptor
*
* Returns : true if it is FCoE pkt
*/
-static inline bool ixgbe_rx_is_fcoe(struct ixgbe_adapter *adapter,
+static inline bool ixgbe_rx_is_fcoe(struct ixgbe_ring *ring,
union ixgbe_adv_rx_desc *rx_desc)
{
__le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
- return (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
+ return test_bit(__IXGBE_RX_FCOE, &ring->state) &&
((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_ETQF_MASK)) ==
(cpu_to_le16(IXGBE_ETQF_FILTER_FCOE <<
IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT)));
@@ -1148,7 +1148,7 @@
/* alloc new page for storage */
if (likely(!page)) {
- page = alloc_pages(GFP_ATOMIC | __GFP_COLD,
+ page = alloc_pages(GFP_ATOMIC | __GFP_COLD | __GFP_COMP,
ixgbe_rx_pg_order(rx_ring));
if (unlikely(!page)) {
rx_ring->rx_stats.alloc_rx_page_failed++;
@@ -1390,6 +1390,8 @@
union ixgbe_adv_rx_desc *rx_desc,
struct sk_buff *skb)
{
+ struct net_device *dev = rx_ring->netdev;
+
ixgbe_update_rsc_stats(rx_ring, skb);
ixgbe_rx_hash(rx_ring, rx_desc, skb);
@@ -1401,14 +1403,15 @@
ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector, skb);
#endif
- if (ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) {
+ if ((dev->features & NETIF_F_HW_VLAN_RX) &&
+ ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) {
u16 vid = le16_to_cpu(rx_desc->wb.upper.vlan);
__vlan_hwaccel_put_tag(skb, vid);
}
skb_record_rx_queue(skb, rx_ring->queue_index);
- skb->protocol = eth_type_trans(skb, rx_ring->netdev);
+ skb->protocol = eth_type_trans(skb, dev);
}
static void ixgbe_rx_skb(struct ixgbe_q_vector *q_vector,
@@ -1546,6 +1549,12 @@
skb->truesize -= ixgbe_rx_bufsz(rx_ring);
}
+#ifdef IXGBE_FCOE
+ /* do not attempt to pad FCoE Frames as this will disrupt DDP */
+ if (ixgbe_rx_is_fcoe(rx_ring, rx_desc))
+ return false;
+
+#endif
/* if skb_pad returns an error the skb was freed */
if (unlikely(skb->len < 60)) {
int pad_len = 60 - skb->len;
@@ -1772,7 +1781,7 @@
#ifdef IXGBE_FCOE
/* if ddp, not passing to ULD unless for FCP_RSP or error */
- if (ixgbe_rx_is_fcoe(adapter, rx_desc)) {
+ if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) {
ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb);
if (!ddp_bytes) {
dev_kfree_skb_any(skb);
@@ -3607,10 +3616,6 @@
if (hw->mac.type == ixgbe_mac_82598EB)
netif_set_gso_max_size(adapter->netdev, 32768);
-
- /* Enable VLAN tag insert/strip */
- adapter->netdev->features |= NETIF_F_HW_VLAN_RX;
-
hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true);
#ifdef IXGBE_FCOE
@@ -6642,6 +6647,11 @@
return -EINVAL;
}
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+ e_err(drv, "Enable failed, SR-IOV enabled\n");
+ return -EINVAL;
+ }
+
/* Hardware supports up to 8 traffic classes */
if (tc > adapter->dcb_cfg.num_tcs.pg_tcs ||
(hw->mac.type == ixgbe_mac_82598EB &&
@@ -6701,11 +6711,6 @@
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
-#ifdef CONFIG_DCB
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
- features &= ~NETIF_F_HW_VLAN_RX;
-#endif
-
/* return error if RXHASH is being enabled when RSS is not supported */
if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED))
features &= ~NETIF_F_RXHASH;
@@ -6718,7 +6723,6 @@
if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
features &= ~NETIF_F_LRO;
-
return features;
}
@@ -6766,6 +6770,11 @@
need_reset = true;
}
+ if (features & NETIF_F_HW_VLAN_RX)
+ ixgbe_vlan_strip_enable(adapter);
+ else
+ ixgbe_vlan_strip_disable(adapter);
+
if (changed & NETIF_F_RXALL)
need_reset = true;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
index ddc6a4d..dcebd12 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
@@ -708,6 +708,7 @@
{
struct ixgbe_hw *hw = &adapter->hw;
u32 incval = 0;
+ u32 timinca = 0;
u32 shift = 0;
u32 cycle_speed;
unsigned long flags;
@@ -730,8 +731,16 @@
break;
}
- /* Bail if the cycle speed didn't change */
- if (adapter->cycle_speed == cycle_speed)
+ /*
+ * grab the current TIMINCA value from the register so that it can be
+ * double checked. If the register value has been cleared, it must be
+ * reset to the correct value for generating a cyclecounter. If
+ * TIMINCA is zero, the SYSTIME registers do not increment at all.
+ */
+ timinca = IXGBE_READ_REG(hw, IXGBE_TIMINCA);
+
+ /* Bail if the cycle speed didn't change and TIMINCA is non-zero */
+ if (adapter->cycle_speed == cycle_speed && timinca)
return;
/* disable the SDP clock out */
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index f69ec42..41e3225 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -201,6 +201,9 @@
unsigned int i, eop, count = 0;
unsigned int total_bytes = 0, total_packets = 0;
+ if (test_bit(__IXGBEVF_DOWN, &adapter->state))
+ return true;
+
i = tx_ring->next_to_clean;
eop = tx_ring->tx_buffer_info[i].next_to_watch;
eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
@@ -969,8 +972,6 @@
r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
for (i = 0; i < q_vector->txr_count; i++) {
tx_ring = &(adapter->tx_ring[r_idx]);
- tx_ring->total_bytes = 0;
- tx_ring->total_packets = 0;
ixgbevf_clean_tx_irq(adapter, tx_ring);
r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
r_idx + 1);
@@ -994,16 +995,6 @@
struct ixgbe_hw *hw = &adapter->hw;
struct ixgbevf_ring *rx_ring;
int r_idx;
- int i;
-
- r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
- for (i = 0; i < q_vector->rxr_count; i++) {
- rx_ring = &(adapter->rx_ring[r_idx]);
- rx_ring->total_bytes = 0;
- rx_ring->total_packets = 0;
- r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
- r_idx + 1);
- }
if (!q_vector->rxr_count)
return IRQ_HANDLED;
diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index 04d901d..f0f06b2 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -436,7 +436,9 @@
/*
* Hardware-specific parameters.
*/
+#if defined(CONFIG_HAVE_CLK)
struct clk *clk;
+#endif
unsigned int t_clk;
};
@@ -2895,17 +2897,17 @@
mp->dev = dev;
/*
- * Get the clk rate, if there is one, otherwise use the default.
+ * Start with a default rate, and if there is a clock, allow
+ * it to override the default.
*/
+ mp->t_clk = 133000000;
+#if defined(CONFIG_HAVE_CLK)
mp->clk = clk_get(&pdev->dev, (pdev->id ? "1" : "0"));
if (!IS_ERR(mp->clk)) {
clk_prepare_enable(mp->clk);
mp->t_clk = clk_get_rate(mp->clk);
- } else {
- mp->t_clk = 133000000;
- printk(KERN_WARNING "Unable to get clock");
}
-
+#endif
set_params(mp, pd);
netif_set_real_num_tx_queues(dev, mp->txq_count);
netif_set_real_num_rx_queues(dev, mp->rxq_count);
@@ -2995,10 +2997,13 @@
phy_detach(mp->phy);
cancel_work_sync(&mp->tx_timeout_task);
+#if defined(CONFIG_HAVE_CLK)
if (!IS_ERR(mp->clk)) {
clk_disable_unprepare(mp->clk);
clk_put(mp->clk);
}
+#endif
+
free_netdev(mp->dev);
platform_set_drvdata(pdev, NULL);
diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index cace36f..28a5445 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -4381,10 +4381,12 @@
struct sky2_port *sky2 = netdev_priv(dev);
netdev_features_t changed = dev->features ^ features;
- if (changed & NETIF_F_RXCSUM) {
- bool on = features & NETIF_F_RXCSUM;
- sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
- on ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
+ if ((changed & NETIF_F_RXCSUM) &&
+ !(sky2->hw->flags & SKY2_HW_NEW_LE)) {
+ sky2_write32(sky2->hw,
+ Q_ADDR(rxqaddr[sky2->port], Q_CSR),
+ (features & NETIF_F_RXCSUM)
+ ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
}
if (changed & NETIF_F_RXHASH)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 926d8aa..073b85b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -929,15 +929,20 @@
if (priv->rx_cq[i].buf)
mlx4_en_destroy_cq(priv, &priv->rx_cq[i]);
}
+
+ if (priv->base_tx_qpn) {
+ mlx4_qp_release_range(priv->mdev->dev, priv->base_tx_qpn, priv->tx_ring_num);
+ priv->base_tx_qpn = 0;
+ }
}
int mlx4_en_alloc_resources(struct mlx4_en_priv *priv)
{
struct mlx4_en_port_profile *prof = priv->prof;
int i;
- int base_tx_qpn, err;
+ int err;
- err = mlx4_qp_reserve_range(priv->mdev->dev, priv->tx_ring_num, 256, &base_tx_qpn);
+ err = mlx4_qp_reserve_range(priv->mdev->dev, priv->tx_ring_num, 256, &priv->base_tx_qpn);
if (err) {
en_err(priv, "failed reserving range for TX rings\n");
return err;
@@ -949,7 +954,7 @@
prof->tx_ring_size, i, TX))
goto err;
- if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], base_tx_qpn + i,
+ if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], priv->base_tx_qpn + i,
prof->tx_ring_size, TXBB_SIZE))
goto err;
}
@@ -969,7 +974,6 @@
err:
en_err(priv, "Failed to allocate NIC resources\n");
- mlx4_qp_release_range(priv->mdev->dev, base_tx_qpn, priv->tx_ring_num);
return -ENOMEM;
}
@@ -1204,9 +1208,11 @@
en_warn(priv, "Using %d RX rings\n", prof->rx_ring_num);
/* Configure port */
+ mlx4_en_calc_rx_buf(dev);
err = mlx4_SET_PORT_general(mdev->dev, priv->port,
- MLX4_EN_MIN_MTU,
- 0, 0, 0, 0);
+ priv->rx_skb_size + ETH_FCS_LEN,
+ prof->tx_pause, prof->tx_ppp,
+ prof->rx_pause, prof->rx_ppp);
if (err) {
en_err(priv, "Failed setting port general configurations "
"for port %d, with error %d\n", priv->port, err);
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index ee6f4fe..a0313de 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1975,6 +1975,8 @@
if (err == -EBUSY && (dev->flags & MLX4_FLAG_MSI_X) &&
!mlx4_is_mfunc(dev)) {
dev->flags &= ~MLX4_FLAG_MSI_X;
+ dev->caps.num_comp_vectors = 1;
+ dev->caps.comp_pool = 0;
pci_disable_msix(pdev);
err = mlx4_setup_hca(dev);
}
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 6ae3509..225c20d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -495,6 +495,7 @@
int vids[128];
bool wol;
struct device *ddev;
+ int base_tx_qpn;
#ifdef CONFIG_MLX4_EN_DCB
struct ieee_ets ets;
diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index 8d2666f..083d671 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -946,16 +946,16 @@
/* Update stats */
ndev->stats.tx_packets++;
ndev->stats.tx_bytes += skb->len;
-
- /* Free buffer */
- dev_kfree_skb_irq(skb);
}
+ dev_kfree_skb_irq(skb);
txcidx = readl(LPC_ENET_TXCONSUMEINDEX(pldat->net_base));
}
- if (netif_queue_stopped(ndev))
- netif_wake_queue(ndev);
+ if (pldat->num_used_tx_buffs <= ENET_TX_DESC/2) {
+ if (netif_queue_stopped(ndev))
+ netif_wake_queue(ndev);
+ }
}
static int __lpc_handle_recv(struct net_device *ndev, int budget)
@@ -1320,6 +1320,7 @@
.ndo_set_rx_mode = lpc_eth_set_multicast_list,
.ndo_do_ioctl = lpc_eth_ioctl,
.ndo_set_mac_address = lpc_set_mac_address,
+ .ndo_change_mtu = eth_change_mtu,
};
static int lpc_eth_drv_probe(struct platform_device *pdev)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 46e77a2..ad98f4d 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -479,7 +479,7 @@
for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) {
pfn = pci_info[i].id;
- if (pfn > QLCNIC_MAX_PCI_FUNC) {
+ if (pfn >= QLCNIC_MAX_PCI_FUNC) {
ret = QL_STATUS_INVALID_PARAM;
goto err_eswitch;
}
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 9757ce3..d7a04e0 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -3894,6 +3894,7 @@
case RTL_GIGA_MAC_VER_22:
case RTL_GIGA_MAC_VER_23:
case RTL_GIGA_MAC_VER_24:
+ case RTL_GIGA_MAC_VER_34:
RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST);
break;
default:
@@ -5889,11 +5890,7 @@
if (status & LinkChg)
__rtl8169_check_link_status(dev, tp, tp->mmio_addr, true);
- napi_disable(&tp->napi);
- rtl_irq_disable(tp);
-
- napi_enable(&tp->napi);
- napi_schedule(&tp->napi);
+ rtl_irq_enable_all(tp);
}
static void rtl_task(struct work_struct *work)
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 667169b..79bf09b 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1011,7 +1011,7 @@
}
/* Packet receive function */
-static int sh_eth_rx(struct net_device *ndev)
+static int sh_eth_rx(struct net_device *ndev, u32 intr_status)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_rxdesc *rxdesc;
@@ -1102,9 +1102,11 @@
/* Restart Rx engine if stopped. */
/* If we don't need to check status, don't. -KDU */
if (!(sh_eth_read(ndev, EDRRR) & EDRRR_R)) {
- /* fix the values for the next receiving */
- mdp->cur_rx = mdp->dirty_rx = (sh_eth_read(ndev, RDFAR) -
- sh_eth_read(ndev, RDLAR)) >> 4;
+ /* fix the values for the next receiving if RDE is set */
+ if (intr_status & EESR_RDE)
+ mdp->cur_rx = mdp->dirty_rx =
+ (sh_eth_read(ndev, RDFAR) -
+ sh_eth_read(ndev, RDLAR)) >> 4;
sh_eth_write(ndev, EDRRR_R, EDRRR);
}
@@ -1273,7 +1275,7 @@
EESR_RTSF | /* short frame recv */
EESR_PRE | /* PHY-LSI recv error */
EESR_CERF)){ /* recv frame CRC error */
- sh_eth_rx(ndev);
+ sh_eth_rx(ndev, intr_status);
}
/* Tx Check */
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 0364283..9f44827 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -13,7 +13,7 @@
if STMMAC_ETH
config STMMAC_PLATFORM
- tristate "STMMAC platform bus support"
+ bool "STMMAC Platform bus support"
depends on STMMAC_ETH
default y
---help---
@@ -26,7 +26,7 @@
If unsure, say N.
config STMMAC_PCI
- tristate "STMMAC support on PCI bus (EXPERIMENTAL)"
+ bool "STMMAC PCI bus support (EXPERIMENTAL)"
depends on STMMAC_ETH && PCI && EXPERIMENTAL
---help---
This is to select the Synopsys DWMAC available on PCI devices,
diff --git a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
index fb8377d..4b785e1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
+++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
@@ -51,7 +51,7 @@
desc->des3 = desc->des2 + BUF_SIZE_4KiB;
priv->hw->desc->prepare_tx_desc(desc, 1, bmax,
csum);
-
+ wmb();
entry = (++priv->cur_tx) % txsize;
desc = priv->dma_tx + entry;
@@ -59,6 +59,7 @@
len, DMA_TO_DEVICE);
desc->des3 = desc->des2 + BUF_SIZE_4KiB;
priv->hw->desc->prepare_tx_desc(desc, 0, len, csum);
+ wmb();
priv->hw->desc->set_tx_owner(desc);
priv->tx_skbuff[entry] = NULL;
} else {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 6b5d060..dc20c56 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -26,6 +26,7 @@
#include <linux/clk.h>
#include <linux/stmmac.h>
#include <linux/phy.h>
+#include <linux/pci.h>
#include "common.h"
#ifdef CONFIG_STMMAC_TIMER
#include "stmmac_timer.h"
@@ -95,7 +96,6 @@
extern void stmmac_set_ethtool_ops(struct net_device *netdev);
extern const struct stmmac_desc_ops enh_desc_ops;
extern const struct stmmac_desc_ops ndesc_ops;
-
int stmmac_freeze(struct net_device *ndev);
int stmmac_restore(struct net_device *ndev);
int stmmac_resume(struct net_device *ndev);
@@ -109,7 +109,7 @@
static inline int stmmac_clk_enable(struct stmmac_priv *priv)
{
if (!IS_ERR(priv->stmmac_clk))
- return clk_enable(priv->stmmac_clk);
+ return clk_prepare_enable(priv->stmmac_clk);
return 0;
}
@@ -119,7 +119,7 @@
if (IS_ERR(priv->stmmac_clk))
return;
- clk_disable(priv->stmmac_clk);
+ clk_disable_unprepare(priv->stmmac_clk);
}
static inline int stmmac_clk_get(struct stmmac_priv *priv)
{
@@ -143,3 +143,60 @@
return 0;
}
#endif /* CONFIG_HAVE_CLK */
+
+
+#ifdef CONFIG_STMMAC_PLATFORM
+extern struct platform_driver stmmac_pltfr_driver;
+static inline int stmmac_register_platform(void)
+{
+ int err;
+
+ err = platform_driver_register(&stmmac_pltfr_driver);
+ if (err)
+ pr_err("stmmac: failed to register the platform driver\n");
+
+ return err;
+}
+static inline void stmmac_unregister_platform(void)
+{
+ platform_driver_register(&stmmac_pltfr_driver);
+}
+#else
+static inline int stmmac_register_platform(void)
+{
+ pr_debug("stmmac: do not register the platf driver\n");
+
+ return -EINVAL;
+}
+static inline void stmmac_unregister_platform(void)
+{
+}
+#endif /* CONFIG_STMMAC_PLATFORM */
+
+#ifdef CONFIG_STMMAC_PCI
+extern struct pci_driver stmmac_pci_driver;
+static inline int stmmac_register_pci(void)
+{
+ int err;
+
+ err = pci_register_driver(&stmmac_pci_driver);
+ if (err)
+ pr_err("stmmac: failed to register the PCI driver\n");
+
+ return err;
+}
+static inline void stmmac_unregister_pci(void)
+{
+ pci_unregister_driver(&stmmac_pci_driver);
+}
+#else
+static inline int stmmac_register_pci(void)
+{
+ pr_debug("stmmac: do not register the PCI driver\n");
+
+ return -EINVAL;
+}
+static inline void stmmac_unregister_pci(void)
+{
+}
+#endif /* CONFIG_STMMAC_PCI */
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 7096633..ea3003e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -833,8 +833,9 @@
/**
* stmmac_selec_desc_mode
- * @dev : device pointer
- * Description: select the Enhanced/Alternate or Normal descriptors */
+ * @priv : private structure
+ * Description: select the Enhanced/Alternate or Normal descriptors
+ */
static void stmmac_selec_desc_mode(struct stmmac_priv *priv)
{
if (priv->plat->enh_desc) {
@@ -1211,6 +1212,7 @@
priv->hw->desc->prepare_tx_desc(desc, 0, len, csum_insertion);
wmb();
priv->hw->desc->set_tx_owner(desc);
+ wmb();
}
/* Interrupt on completition only for the latest segment */
@@ -1226,6 +1228,7 @@
/* To avoid raise condition */
priv->hw->desc->set_tx_owner(first);
+ wmb();
priv->cur_tx++;
@@ -1289,6 +1292,7 @@
}
wmb();
priv->hw->desc->set_rx_owner(p + entry);
+ wmb();
}
}
@@ -1861,6 +1865,8 @@
/**
* stmmac_dvr_probe
* @device: device pointer
+ * @plat_dat: platform data pointer
+ * @addr: iobase memory address
* Description: this is the main probe function used to
* call the alloc_etherdev, allocate the priv structure.
*/
@@ -2090,6 +2096,34 @@
}
#endif /* CONFIG_PM */
+/* Driver can be configured w/ and w/ both PCI and Platf drivers
+ * depending on the configuration selected.
+ */
+static int __init stmmac_init(void)
+{
+ int err_plt = 0;
+ int err_pci = 0;
+
+ err_plt = stmmac_register_platform();
+ err_pci = stmmac_register_pci();
+
+ if ((err_pci) && (err_plt)) {
+ pr_err("stmmac: driver registration failed\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void __exit stmmac_exit(void)
+{
+ stmmac_unregister_platform();
+ stmmac_unregister_pci();
+}
+
+module_init(stmmac_init);
+module_exit(stmmac_exit);
+
#ifndef MODULE
static int __init stmmac_cmdline_opt(char *str)
{
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index 58fab53..cf826e6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -179,7 +179,7 @@
MODULE_DEVICE_TABLE(pci, stmmac_id_table);
-static struct pci_driver stmmac_driver = {
+struct pci_driver stmmac_pci_driver = {
.name = STMMAC_RESOURCE_NAME,
.id_table = stmmac_id_table,
.probe = stmmac_pci_probe,
@@ -190,33 +190,6 @@
#endif
};
-/**
- * stmmac_init_module - Entry point for the driver
- * Description: This function is the entry point for the driver.
- */
-static int __init stmmac_init_module(void)
-{
- int ret;
-
- ret = pci_register_driver(&stmmac_driver);
- if (ret < 0)
- pr_err("%s: ERROR: driver registration failed\n", __func__);
-
- return ret;
-}
-
-/**
- * stmmac_cleanup_module - Cleanup routine for the driver
- * Description: This function is the cleanup routine for the driver.
- */
-static void __exit stmmac_cleanup_module(void)
-{
- pci_unregister_driver(&stmmac_driver);
-}
-
-module_init(stmmac_init_module);
-module_exit(stmmac_cleanup_module);
-
MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PCI driver");
MODULE_AUTHOR("Rayagond Kokatanur <rayagond.kokatanur@vayavyalabs.com>");
MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 3dd8f08..680d2b8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -255,7 +255,7 @@
};
MODULE_DEVICE_TABLE(of, stmmac_dt_ids);
-static struct platform_driver stmmac_driver = {
+struct platform_driver stmmac_pltfr_driver = {
.probe = stmmac_pltfr_probe,
.remove = stmmac_pltfr_remove,
.driver = {
@@ -266,8 +266,6 @@
},
};
-module_platform_driver(stmmac_driver);
-
MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PLATFORM driver");
MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c
index 703c8cc..8c726b7 100644
--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -3598,7 +3598,6 @@
static void niu_tx_work(struct niu *np, struct tx_ring_info *rp)
{
struct netdev_queue *txq;
- unsigned int tx_bytes;
u16 pkt_cnt, tmp;
int cons, index;
u64 cs;
@@ -3621,18 +3620,12 @@
netif_printk(np, tx_done, KERN_DEBUG, np->dev,
"%s() pkt_cnt[%u] cons[%d]\n", __func__, pkt_cnt, cons);
- tx_bytes = 0;
- tmp = pkt_cnt;
- while (tmp--) {
- tx_bytes += rp->tx_buffs[cons].skb->len;
+ while (pkt_cnt--)
cons = release_tx_packet(np, rp, cons);
- }
rp->cons = cons;
smp_mb();
- netdev_tx_completed_queue(txq, pkt_cnt, tx_bytes);
-
out:
if (unlikely(netif_tx_queue_stopped(txq) &&
(niu_tx_avail(rp) > NIU_TX_WAKEUP_THRESH(rp)))) {
@@ -4333,7 +4326,6 @@
struct tx_ring_info *rp = &np->tx_rings[i];
niu_free_tx_ring_info(np, rp);
- netdev_tx_reset_queue(netdev_get_tx_queue(np->dev, i));
}
kfree(np->tx_rings);
np->tx_rings = NULL;
@@ -6739,8 +6731,6 @@
prod = NEXT_TX(rp, prod);
}
- netdev_tx_sent_queue(txq, skb->len);
-
if (prod < rp->prod)
rp->wrap_bit ^= TX_RING_KICK_WRAP;
rp->prod = prod;
diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
index d614c37..3b5c457 100644
--- a/drivers/net/ethernet/ti/davinci_cpdma.c
+++ b/drivers/net/ethernet/ti/davinci_cpdma.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/device.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/dma-mapping.h>
diff --git a/drivers/net/ethernet/tile/Kconfig b/drivers/net/ethernet/tile/Kconfig
index 2d9218f..098b1c4 100644
--- a/drivers/net/ethernet/tile/Kconfig
+++ b/drivers/net/ethernet/tile/Kconfig
@@ -7,6 +7,8 @@
depends on TILE
default y
select CRC32
+ select TILE_GXIO_MPIPE if TILEGX
+ select HIGH_RES_TIMERS if TILEGX
---help---
This is a standard Linux network device driver for the
on-chip Tilera Gigabit Ethernet and XAUI interfaces.
diff --git a/drivers/net/ethernet/tile/Makefile b/drivers/net/ethernet/tile/Makefile
index f634f14..0ef9eef 100644
--- a/drivers/net/ethernet/tile/Makefile
+++ b/drivers/net/ethernet/tile/Makefile
@@ -4,7 +4,7 @@
obj-$(CONFIG_TILE_NET) += tile_net.o
ifdef CONFIG_TILEGX
-tile_net-objs := tilegx.o mpipe.o iorpc_mpipe.o dma_queue.o
+tile_net-y := tilegx.o
else
-tile_net-objs := tilepro.o
+tile_net-y := tilepro.o
endif
diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c
new file mode 100644
index 0000000..83b4b38
--- /dev/null
+++ b/drivers/net/ethernet/tile/tilegx.c
@@ -0,0 +1,1898 @@
+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/sched.h>
+#include <linux/kernel.h> /* printk() */
+#include <linux/slab.h> /* kmalloc() */
+#include <linux/errno.h> /* error codes */
+#include <linux/types.h> /* size_t */
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/irq.h>
+#include <linux/netdevice.h> /* struct device, and other headers */
+#include <linux/etherdevice.h> /* eth_type_trans */
+#include <linux/skbuff.h>
+#include <linux/ioctl.h>
+#include <linux/cdev.h>
+#include <linux/hugetlb.h>
+#include <linux/in6.h>
+#include <linux/timer.h>
+#include <linux/hrtimer.h>
+#include <linux/ktime.h>
+#include <linux/io.h>
+#include <linux/ctype.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+
+#include <asm/checksum.h>
+#include <asm/homecache.h>
+#include <gxio/mpipe.h>
+#include <arch/sim.h>
+
+/* Default transmit lockup timeout period, in jiffies. */
+#define TILE_NET_TIMEOUT (5 * HZ)
+
+/* The maximum number of distinct channels (idesc.channel is 5 bits). */
+#define TILE_NET_CHANNELS 32
+
+/* Maximum number of idescs to handle per "poll". */
+#define TILE_NET_BATCH 128
+
+/* Maximum number of packets to handle per "poll". */
+#define TILE_NET_WEIGHT 64
+
+/* Number of entries in each iqueue. */
+#define IQUEUE_ENTRIES 512
+
+/* Number of entries in each equeue. */
+#define EQUEUE_ENTRIES 2048
+
+/* Total header bytes per equeue slot. Must be big enough for 2 bytes
+ * of NET_IP_ALIGN alignment, plus 14 bytes (?) of L2 header, plus up to
+ * 60 bytes of actual TCP header. We round up to align to cache lines.
+ */
+#define HEADER_BYTES 128
+
+/* Maximum completions per cpu per device (must be a power of two).
+ * ISSUE: What is the right number here? If this is too small, then
+ * egress might block waiting for free space in a completions array.
+ * ISSUE: At the least, allocate these only for initialized echannels.
+ */
+#define TILE_NET_MAX_COMPS 64
+
+#define MAX_FRAGS (MAX_SKB_FRAGS + 1)
+
+/* Size of completions data to allocate.
+ * ISSUE: Probably more than needed since we don't use all the channels.
+ */
+#define COMPS_SIZE (TILE_NET_CHANNELS * sizeof(struct tile_net_comps))
+
+/* Size of NotifRing data to allocate. */
+#define NOTIF_RING_SIZE (IQUEUE_ENTRIES * sizeof(gxio_mpipe_idesc_t))
+
+/* Timeout to wake the per-device TX timer after we stop the queue.
+ * We don't want the timeout too short (adds overhead, and might end
+ * up causing stop/wake/stop/wake cycles) or too long (affects performance).
+ * For the 10 Gb NIC, 30 usec means roughly 30+ 1500-byte packets.
+ */
+#define TX_TIMER_DELAY_USEC 30
+
+/* Timeout to wake the per-cpu egress timer to free completions. */
+#define EGRESS_TIMER_DELAY_USEC 1000
+
+MODULE_AUTHOR("Tilera Corporation");
+MODULE_LICENSE("GPL");
+
+/* A "packet fragment" (a chunk of memory). */
+struct frag {
+ void *buf;
+ size_t length;
+};
+
+/* A single completion. */
+struct tile_net_comp {
+ /* The "complete_count" when the completion will be complete. */
+ s64 when;
+ /* The buffer to be freed when the completion is complete. */
+ struct sk_buff *skb;
+};
+
+/* The completions for a given cpu and echannel. */
+struct tile_net_comps {
+ /* The completions. */
+ struct tile_net_comp comp_queue[TILE_NET_MAX_COMPS];
+ /* The number of completions used. */
+ unsigned long comp_next;
+ /* The number of completions freed. */
+ unsigned long comp_last;
+};
+
+/* The transmit wake timer for a given cpu and echannel. */
+struct tile_net_tx_wake {
+ struct hrtimer timer;
+ struct net_device *dev;
+};
+
+/* Info for a specific cpu. */
+struct tile_net_info {
+ /* The NAPI struct. */
+ struct napi_struct napi;
+ /* Packet queue. */
+ gxio_mpipe_iqueue_t iqueue;
+ /* Our cpu. */
+ int my_cpu;
+ /* True if iqueue is valid. */
+ bool has_iqueue;
+ /* NAPI flags. */
+ bool napi_added;
+ bool napi_enabled;
+ /* Number of small sk_buffs which must still be provided. */
+ unsigned int num_needed_small_buffers;
+ /* Number of large sk_buffs which must still be provided. */
+ unsigned int num_needed_large_buffers;
+ /* A timer for handling egress completions. */
+ struct hrtimer egress_timer;
+ /* True if "egress_timer" is scheduled. */
+ bool egress_timer_scheduled;
+ /* Comps for each egress channel. */
+ struct tile_net_comps *comps_for_echannel[TILE_NET_CHANNELS];
+ /* Transmit wake timer for each egress channel. */
+ struct tile_net_tx_wake tx_wake[TILE_NET_CHANNELS];
+};
+
+/* Info for egress on a particular egress channel. */
+struct tile_net_egress {
+ /* The "equeue". */
+ gxio_mpipe_equeue_t *equeue;
+ /* The headers for TSO. */
+ unsigned char *headers;
+};
+
+/* Info for a specific device. */
+struct tile_net_priv {
+ /* Our network device. */
+ struct net_device *dev;
+ /* The primary link. */
+ gxio_mpipe_link_t link;
+ /* The primary channel, if open, else -1. */
+ int channel;
+ /* The "loopify" egress link, if needed. */
+ gxio_mpipe_link_t loopify_link;
+ /* The "loopify" egress channel, if open, else -1. */
+ int loopify_channel;
+ /* The egress channel (channel or loopify_channel). */
+ int echannel;
+ /* Total stats. */
+ struct net_device_stats stats;
+};
+
+/* Egress info, indexed by "priv->echannel" (lazily created as needed). */
+static struct tile_net_egress egress_for_echannel[TILE_NET_CHANNELS];
+
+/* Devices currently associated with each channel.
+ * NOTE: The array entry can become NULL after ifconfig down, but
+ * we do not free the underlying net_device structures, so it is
+ * safe to use a pointer after reading it from this array.
+ */
+static struct net_device *tile_net_devs_for_channel[TILE_NET_CHANNELS];
+
+/* A mutex for "tile_net_devs_for_channel". */
+static DEFINE_MUTEX(tile_net_devs_for_channel_mutex);
+
+/* The per-cpu info. */
+static DEFINE_PER_CPU(struct tile_net_info, per_cpu_info);
+
+/* The "context" for all devices. */
+static gxio_mpipe_context_t context;
+
+/* Buffer sizes and mpipe enum codes for buffer stacks.
+ * See arch/tile/include/gxio/mpipe.h for the set of possible values.
+ */
+#define BUFFER_SIZE_SMALL_ENUM GXIO_MPIPE_BUFFER_SIZE_128
+#define BUFFER_SIZE_SMALL 128
+#define BUFFER_SIZE_LARGE_ENUM GXIO_MPIPE_BUFFER_SIZE_1664
+#define BUFFER_SIZE_LARGE 1664
+
+/* The small/large "buffer stacks". */
+static int small_buffer_stack = -1;
+static int large_buffer_stack = -1;
+
+/* Amount of memory allocated for each buffer stack. */
+static size_t buffer_stack_size;
+
+/* The actual memory allocated for the buffer stacks. */
+static void *small_buffer_stack_va;
+static void *large_buffer_stack_va;
+
+/* The buckets. */
+static int first_bucket = -1;
+static int num_buckets = 1;
+
+/* The ingress irq. */
+static int ingress_irq = -1;
+
+/* Text value of tile_net.cpus if passed as a module parameter. */
+static char *network_cpus_string;
+
+/* The actual cpus in "network_cpus". */
+static struct cpumask network_cpus_map;
+
+/* If "loopify=LINK" was specified, this is "LINK". */
+static char *loopify_link_name;
+
+/* If "tile_net.custom" was specified, this is non-NULL. */
+static char *custom_str;
+
+/* The "tile_net.cpus" argument specifies the cpus that are dedicated
+ * to handle ingress packets.
+ *
+ * The parameter should be in the form "tile_net.cpus=m-n[,x-y]", where
+ * m, n, x, y are integer numbers that represent the cpus that can be
+ * neither a dedicated cpu nor a dataplane cpu.
+ */
+static bool network_cpus_init(void)
+{
+ char buf[1024];
+ int rc;
+
+ if (network_cpus_string == NULL)
+ return false;
+
+ rc = cpulist_parse_crop(network_cpus_string, &network_cpus_map);
+ if (rc != 0) {
+ pr_warn("tile_net.cpus=%s: malformed cpu list\n",
+ network_cpus_string);
+ return false;
+ }
+
+ /* Remove dedicated cpus. */
+ cpumask_and(&network_cpus_map, &network_cpus_map, cpu_possible_mask);
+
+ if (cpumask_empty(&network_cpus_map)) {
+ pr_warn("Ignoring empty tile_net.cpus='%s'.\n",
+ network_cpus_string);
+ return false;
+ }
+
+ cpulist_scnprintf(buf, sizeof(buf), &network_cpus_map);
+ pr_info("Linux network CPUs: %s\n", buf);
+ return true;
+}
+
+module_param_named(cpus, network_cpus_string, charp, 0444);
+MODULE_PARM_DESC(cpus, "cpulist of cores that handle network interrupts");
+
+/* The "tile_net.loopify=LINK" argument causes the named device to
+ * actually use "loop0" for ingress, and "loop1" for egress. This
+ * allows an app to sit between the actual link and linux, passing
+ * (some) packets along to linux, and forwarding (some) packets sent
+ * out by linux.
+ */
+module_param_named(loopify, loopify_link_name, charp, 0444);
+MODULE_PARM_DESC(loopify, "name the device to use loop0/1 for ingress/egress");
+
+/* The "tile_net.custom" argument causes us to ignore the "conventional"
+ * classifier metadata, in particular, the "l2_offset".
+ */
+module_param_named(custom, custom_str, charp, 0444);
+MODULE_PARM_DESC(custom, "indicates a (heavily) customized classifier");
+
+/* Atomically update a statistics field.
+ * Note that on TILE-Gx, this operation is fire-and-forget on the
+ * issuing core (single-cycle dispatch) and takes only a few cycles
+ * longer than a regular store when the request reaches the home cache.
+ * No expensive bus management overhead is required.
+ */
+static void tile_net_stats_add(unsigned long value, unsigned long *field)
+{
+ BUILD_BUG_ON(sizeof(atomic_long_t) != sizeof(unsigned long));
+ atomic_long_add(value, (atomic_long_t *)field);
+}
+
+/* Allocate and push a buffer. */
+static bool tile_net_provide_buffer(bool small)
+{
+ int stack = small ? small_buffer_stack : large_buffer_stack;
+ const unsigned long buffer_alignment = 128;
+ struct sk_buff *skb;
+ int len;
+
+ len = sizeof(struct sk_buff **) + buffer_alignment;
+ len += (small ? BUFFER_SIZE_SMALL : BUFFER_SIZE_LARGE);
+ skb = dev_alloc_skb(len);
+ if (skb == NULL)
+ return false;
+
+ /* Make room for a back-pointer to 'skb' and guarantee alignment. */
+ skb_reserve(skb, sizeof(struct sk_buff **));
+ skb_reserve(skb, -(long)skb->data & (buffer_alignment - 1));
+
+ /* Save a back-pointer to 'skb'. */
+ *(struct sk_buff **)(skb->data - sizeof(struct sk_buff **)) = skb;
+
+ /* Make sure "skb" and the back-pointer have been flushed. */
+ wmb();
+
+ gxio_mpipe_push_buffer(&context, stack,
+ (void *)va_to_tile_io_addr(skb->data));
+
+ return true;
+}
+
+/* Convert a raw mpipe buffer to its matching skb pointer. */
+static struct sk_buff *mpipe_buf_to_skb(void *va)
+{
+ /* Acquire the associated "skb". */
+ struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
+ struct sk_buff *skb = *skb_ptr;
+
+ /* Paranoia. */
+ if (skb->data != va) {
+ /* Panic here since there's a reasonable chance
+ * that corrupt buffers means generic memory
+ * corruption, with unpredictable system effects.
+ */
+ panic("Corrupt linux buffer! va=%p, skb=%p, skb->data=%p",
+ va, skb, skb->data);
+ }
+
+ return skb;
+}
+
+static void tile_net_pop_all_buffers(int stack)
+{
+ for (;;) {
+ tile_io_addr_t addr =
+ (tile_io_addr_t)gxio_mpipe_pop_buffer(&context, stack);
+ if (addr == 0)
+ break;
+ dev_kfree_skb_irq(mpipe_buf_to_skb(tile_io_addr_to_va(addr)));
+ }
+}
+
+/* Provide linux buffers to mPIPE. */
+static void tile_net_provide_needed_buffers(void)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+
+ while (info->num_needed_small_buffers != 0) {
+ if (!tile_net_provide_buffer(true))
+ goto oops;
+ info->num_needed_small_buffers--;
+ }
+
+ while (info->num_needed_large_buffers != 0) {
+ if (!tile_net_provide_buffer(false))
+ goto oops;
+ info->num_needed_large_buffers--;
+ }
+
+ return;
+
+oops:
+ /* Add a description to the page allocation failure dump. */
+ pr_notice("Tile %d still needs some buffers\n", info->my_cpu);
+}
+
+static inline bool filter_packet(struct net_device *dev, void *buf)
+{
+ /* Filter packets received before we're up. */
+ if (dev == NULL || !(dev->flags & IFF_UP))
+ return true;
+
+ /* Filter out packets that aren't for us. */
+ if (!(dev->flags & IFF_PROMISC) &&
+ !is_multicast_ether_addr(buf) &&
+ compare_ether_addr(dev->dev_addr, buf) != 0)
+ return true;
+
+ return false;
+}
+
+static void tile_net_receive_skb(struct net_device *dev, struct sk_buff *skb,
+ gxio_mpipe_idesc_t *idesc, unsigned long len)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ struct tile_net_priv *priv = netdev_priv(dev);
+
+ /* Encode the actual packet length. */
+ skb_put(skb, len);
+
+ skb->protocol = eth_type_trans(skb, dev);
+
+ /* Acknowledge "good" hardware checksums. */
+ if (idesc->cs && idesc->csum_seed_val == 0xFFFF)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ netif_receive_skb(skb);
+
+ /* Update stats. */
+ tile_net_stats_add(1, &priv->stats.rx_packets);
+ tile_net_stats_add(len, &priv->stats.rx_bytes);
+
+ /* Need a new buffer. */
+ if (idesc->size == BUFFER_SIZE_SMALL_ENUM)
+ info->num_needed_small_buffers++;
+ else
+ info->num_needed_large_buffers++;
+}
+
+/* Handle a packet. Return true if "processed", false if "filtered". */
+static bool tile_net_handle_packet(gxio_mpipe_idesc_t *idesc)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ struct net_device *dev = tile_net_devs_for_channel[idesc->channel];
+ uint8_t l2_offset;
+ void *va;
+ void *buf;
+ unsigned long len;
+ bool filter;
+
+ /* Drop packets for which no buffer was available.
+ * NOTE: This happens under heavy load.
+ */
+ if (idesc->be) {
+ struct tile_net_priv *priv = netdev_priv(dev);
+ tile_net_stats_add(1, &priv->stats.rx_dropped);
+ gxio_mpipe_iqueue_consume(&info->iqueue, idesc);
+ if (net_ratelimit())
+ pr_info("Dropping packet (insufficient buffers).\n");
+ return false;
+ }
+
+ /* Get the "l2_offset", if allowed. */
+ l2_offset = custom_str ? 0 : gxio_mpipe_idesc_get_l2_offset(idesc);
+
+ /* Get the raw buffer VA (includes "headroom"). */
+ va = tile_io_addr_to_va((unsigned long)(long)idesc->va);
+
+ /* Get the actual packet start/length. */
+ buf = va + l2_offset;
+ len = idesc->l2_size - l2_offset;
+
+ /* Point "va" at the raw buffer. */
+ va -= NET_IP_ALIGN;
+
+ filter = filter_packet(dev, buf);
+ if (filter) {
+ gxio_mpipe_iqueue_drop(&info->iqueue, idesc);
+ } else {
+ struct sk_buff *skb = mpipe_buf_to_skb(va);
+
+ /* Skip headroom, and any custom header. */
+ skb_reserve(skb, NET_IP_ALIGN + l2_offset);
+
+ tile_net_receive_skb(dev, skb, idesc, len);
+ }
+
+ gxio_mpipe_iqueue_consume(&info->iqueue, idesc);
+ return !filter;
+}
+
+/* Handle some packets for the current CPU.
+ *
+ * This function handles up to TILE_NET_BATCH idescs per call.
+ *
+ * ISSUE: Since we do not provide new buffers until this function is
+ * complete, we must initially provide enough buffers for each network
+ * cpu to fill its iqueue and also its batched idescs.
+ *
+ * ISSUE: The "rotting packet" race condition occurs if a packet
+ * arrives after the queue appears to be empty, and before the
+ * hypervisor interrupt is re-enabled.
+ */
+static int tile_net_poll(struct napi_struct *napi, int budget)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ unsigned int work = 0;
+ gxio_mpipe_idesc_t *idesc;
+ int i, n;
+
+ /* Process packets. */
+ while ((n = gxio_mpipe_iqueue_try_peek(&info->iqueue, &idesc)) > 0) {
+ for (i = 0; i < n; i++) {
+ if (i == TILE_NET_BATCH)
+ goto done;
+ if (tile_net_handle_packet(idesc + i)) {
+ if (++work >= budget)
+ goto done;
+ }
+ }
+ }
+
+ /* There are no packets left. */
+ napi_complete(&info->napi);
+
+ /* Re-enable hypervisor interrupts. */
+ gxio_mpipe_enable_notif_ring_interrupt(&context, info->iqueue.ring);
+
+ /* HACK: Avoid the "rotting packet" problem. */
+ if (gxio_mpipe_iqueue_try_peek(&info->iqueue, &idesc) > 0)
+ napi_schedule(&info->napi);
+
+ /* ISSUE: Handle completions? */
+
+done:
+ tile_net_provide_needed_buffers();
+
+ return work;
+}
+
+/* Handle an ingress interrupt on the current cpu. */
+static irqreturn_t tile_net_handle_ingress_irq(int irq, void *unused)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ napi_schedule(&info->napi);
+ return IRQ_HANDLED;
+}
+
+/* Free some completions. This must be called with interrupts blocked. */
+static int tile_net_free_comps(gxio_mpipe_equeue_t *equeue,
+ struct tile_net_comps *comps,
+ int limit, bool force_update)
+{
+ int n = 0;
+ while (comps->comp_last < comps->comp_next) {
+ unsigned int cid = comps->comp_last % TILE_NET_MAX_COMPS;
+ struct tile_net_comp *comp = &comps->comp_queue[cid];
+ if (!gxio_mpipe_equeue_is_complete(equeue, comp->when,
+ force_update || n == 0))
+ break;
+ dev_kfree_skb_irq(comp->skb);
+ comps->comp_last++;
+ if (++n == limit)
+ break;
+ }
+ return n;
+}
+
+/* Add a completion. This must be called with interrupts blocked.
+ * tile_net_equeue_try_reserve() will have ensured a free completion entry.
+ */
+static void add_comp(gxio_mpipe_equeue_t *equeue,
+ struct tile_net_comps *comps,
+ uint64_t when, struct sk_buff *skb)
+{
+ int cid = comps->comp_next % TILE_NET_MAX_COMPS;
+ comps->comp_queue[cid].when = when;
+ comps->comp_queue[cid].skb = skb;
+ comps->comp_next++;
+}
+
+static void tile_net_schedule_tx_wake_timer(struct net_device *dev)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ struct tile_net_priv *priv = netdev_priv(dev);
+
+ hrtimer_start(&info->tx_wake[priv->echannel].timer,
+ ktime_set(0, TX_TIMER_DELAY_USEC * 1000UL),
+ HRTIMER_MODE_REL_PINNED);
+}
+
+static enum hrtimer_restart tile_net_handle_tx_wake_timer(struct hrtimer *t)
+{
+ struct tile_net_tx_wake *tx_wake =
+ container_of(t, struct tile_net_tx_wake, timer);
+ netif_wake_subqueue(tx_wake->dev, smp_processor_id());
+ return HRTIMER_NORESTART;
+}
+
+/* Make sure the egress timer is scheduled. */
+static void tile_net_schedule_egress_timer(void)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+
+ if (!info->egress_timer_scheduled) {
+ hrtimer_start(&info->egress_timer,
+ ktime_set(0, EGRESS_TIMER_DELAY_USEC * 1000UL),
+ HRTIMER_MODE_REL_PINNED);
+ info->egress_timer_scheduled = true;
+ }
+}
+
+/* The "function" for "info->egress_timer".
+ *
+ * This timer will reschedule itself as long as there are any pending
+ * completions expected for this tile.
+ */
+static enum hrtimer_restart tile_net_handle_egress_timer(struct hrtimer *t)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ unsigned long irqflags;
+ bool pending = false;
+ int i;
+
+ local_irq_save(irqflags);
+
+ /* The timer is no longer scheduled. */
+ info->egress_timer_scheduled = false;
+
+ /* Free all possible comps for this tile. */
+ for (i = 0; i < TILE_NET_CHANNELS; i++) {
+ struct tile_net_egress *egress = &egress_for_echannel[i];
+ struct tile_net_comps *comps = info->comps_for_echannel[i];
+ if (comps->comp_last >= comps->comp_next)
+ continue;
+ tile_net_free_comps(egress->equeue, comps, -1, true);
+ pending = pending || (comps->comp_last < comps->comp_next);
+ }
+
+ /* Reschedule timer if needed. */
+ if (pending)
+ tile_net_schedule_egress_timer();
+
+ local_irq_restore(irqflags);
+
+ return HRTIMER_NORESTART;
+}
+
+/* Helper function for "tile_net_update()".
+ * "dev" (i.e. arg) is the device being brought up or down,
+ * or NULL if all devices are now down.
+ */
+static void tile_net_update_cpu(void *arg)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ struct net_device *dev = arg;
+
+ if (!info->has_iqueue)
+ return;
+
+ if (dev != NULL) {
+ if (!info->napi_added) {
+ netif_napi_add(dev, &info->napi,
+ tile_net_poll, TILE_NET_WEIGHT);
+ info->napi_added = true;
+ }
+ if (!info->napi_enabled) {
+ napi_enable(&info->napi);
+ info->napi_enabled = true;
+ }
+ enable_percpu_irq(ingress_irq, 0);
+ } else {
+ disable_percpu_irq(ingress_irq);
+ if (info->napi_enabled) {
+ napi_disable(&info->napi);
+ info->napi_enabled = false;
+ }
+ /* FIXME: Drain the iqueue. */
+ }
+}
+
+/* Helper function for tile_net_open() and tile_net_stop().
+ * Always called under tile_net_devs_for_channel_mutex.
+ */
+static int tile_net_update(struct net_device *dev)
+{
+ static gxio_mpipe_rules_t rules; /* too big to fit on the stack */
+ bool saw_channel = false;
+ int channel;
+ int rc;
+ int cpu;
+
+ gxio_mpipe_rules_init(&rules, &context);
+
+ for (channel = 0; channel < TILE_NET_CHANNELS; channel++) {
+ if (tile_net_devs_for_channel[channel] == NULL)
+ continue;
+ if (!saw_channel) {
+ saw_channel = true;
+ gxio_mpipe_rules_begin(&rules, first_bucket,
+ num_buckets, NULL);
+ gxio_mpipe_rules_set_headroom(&rules, NET_IP_ALIGN);
+ }
+ gxio_mpipe_rules_add_channel(&rules, channel);
+ }
+
+ /* NOTE: This can fail if there is no classifier.
+ * ISSUE: Can anything else cause it to fail?
+ */
+ rc = gxio_mpipe_rules_commit(&rules);
+ if (rc != 0) {
+ netdev_warn(dev, "gxio_mpipe_rules_commit failed: %d\n", rc);
+ return -EIO;
+ }
+
+ /* Update all cpus, sequentially (to protect "netif_napi_add()"). */
+ for_each_online_cpu(cpu)
+ smp_call_function_single(cpu, tile_net_update_cpu,
+ (saw_channel ? dev : NULL), 1);
+
+ /* HACK: Allow packets to flow in the simulator. */
+ if (saw_channel)
+ sim_enable_mpipe_links(0, -1);
+
+ return 0;
+}
+
+/* Allocate and initialize mpipe buffer stacks, and register them in
+ * the mPIPE TLBs, for both small and large packet sizes.
+ * This routine supports tile_net_init_mpipe(), below.
+ */
+static int init_buffer_stacks(struct net_device *dev, int num_buffers)
+{
+ pte_t hash_pte = pte_set_home((pte_t) { 0 }, PAGE_HOME_HASH);
+ int rc;
+
+ /* Compute stack bytes; we round up to 64KB and then use
+ * alloc_pages() so we get the required 64KB alignment as well.
+ */
+ buffer_stack_size =
+ ALIGN(gxio_mpipe_calc_buffer_stack_bytes(num_buffers),
+ 64 * 1024);
+
+ /* Allocate two buffer stack indices. */
+ rc = gxio_mpipe_alloc_buffer_stacks(&context, 2, 0, 0);
+ if (rc < 0) {
+ netdev_err(dev, "gxio_mpipe_alloc_buffer_stacks failed: %d\n",
+ rc);
+ return rc;
+ }
+ small_buffer_stack = rc;
+ large_buffer_stack = rc + 1;
+
+ /* Allocate the small memory stack. */
+ small_buffer_stack_va =
+ alloc_pages_exact(buffer_stack_size, GFP_KERNEL);
+ if (small_buffer_stack_va == NULL) {
+ netdev_err(dev,
+ "Could not alloc %zd bytes for buffer stacks\n",
+ buffer_stack_size);
+ return -ENOMEM;
+ }
+ rc = gxio_mpipe_init_buffer_stack(&context, small_buffer_stack,
+ BUFFER_SIZE_SMALL_ENUM,
+ small_buffer_stack_va,
+ buffer_stack_size, 0);
+ if (rc != 0) {
+ netdev_err(dev, "gxio_mpipe_init_buffer_stack: %d\n", rc);
+ return rc;
+ }
+ rc = gxio_mpipe_register_client_memory(&context, small_buffer_stack,
+ hash_pte, 0);
+ if (rc != 0) {
+ netdev_err(dev,
+ "gxio_mpipe_register_buffer_memory failed: %d\n",
+ rc);
+ return rc;
+ }
+
+ /* Allocate the large buffer stack. */
+ large_buffer_stack_va =
+ alloc_pages_exact(buffer_stack_size, GFP_KERNEL);
+ if (large_buffer_stack_va == NULL) {
+ netdev_err(dev,
+ "Could not alloc %zd bytes for buffer stacks\n",
+ buffer_stack_size);
+ return -ENOMEM;
+ }
+ rc = gxio_mpipe_init_buffer_stack(&context, large_buffer_stack,
+ BUFFER_SIZE_LARGE_ENUM,
+ large_buffer_stack_va,
+ buffer_stack_size, 0);
+ if (rc != 0) {
+ netdev_err(dev, "gxio_mpipe_init_buffer_stack failed: %d\n",
+ rc);
+ return rc;
+ }
+ rc = gxio_mpipe_register_client_memory(&context, large_buffer_stack,
+ hash_pte, 0);
+ if (rc != 0) {
+ netdev_err(dev,
+ "gxio_mpipe_register_buffer_memory failed: %d\n",
+ rc);
+ return rc;
+ }
+
+ return 0;
+}
+
+/* Allocate per-cpu resources (memory for completions and idescs).
+ * This routine supports tile_net_init_mpipe(), below.
+ */
+static int alloc_percpu_mpipe_resources(struct net_device *dev,
+ int cpu, int ring)
+{
+ struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
+ int order, i, rc;
+ struct page *page;
+ void *addr;
+
+ /* Allocate the "comps". */
+ order = get_order(COMPS_SIZE);
+ page = homecache_alloc_pages(GFP_KERNEL, order, cpu);
+ if (page == NULL) {
+ netdev_err(dev, "Failed to alloc %zd bytes comps memory\n",
+ COMPS_SIZE);
+ return -ENOMEM;
+ }
+ addr = pfn_to_kaddr(page_to_pfn(page));
+ memset(addr, 0, COMPS_SIZE);
+ for (i = 0; i < TILE_NET_CHANNELS; i++)
+ info->comps_for_echannel[i] =
+ addr + i * sizeof(struct tile_net_comps);
+
+ /* If this is a network cpu, create an iqueue. */
+ if (cpu_isset(cpu, network_cpus_map)) {
+ order = get_order(NOTIF_RING_SIZE);
+ page = homecache_alloc_pages(GFP_KERNEL, order, cpu);
+ if (page == NULL) {
+ netdev_err(dev,
+ "Failed to alloc %zd bytes iqueue memory\n",
+ NOTIF_RING_SIZE);
+ return -ENOMEM;
+ }
+ addr = pfn_to_kaddr(page_to_pfn(page));
+ rc = gxio_mpipe_iqueue_init(&info->iqueue, &context, ring++,
+ addr, NOTIF_RING_SIZE, 0);
+ if (rc < 0) {
+ netdev_err(dev,
+ "gxio_mpipe_iqueue_init failed: %d\n", rc);
+ return rc;
+ }
+ info->has_iqueue = true;
+ }
+
+ return ring;
+}
+
+/* Initialize NotifGroup and buckets.
+ * This routine supports tile_net_init_mpipe(), below.
+ */
+static int init_notif_group_and_buckets(struct net_device *dev,
+ int ring, int network_cpus_count)
+{
+ int group, rc;
+
+ /* Allocate one NotifGroup. */
+ rc = gxio_mpipe_alloc_notif_groups(&context, 1, 0, 0);
+ if (rc < 0) {
+ netdev_err(dev, "gxio_mpipe_alloc_notif_groups failed: %d\n",
+ rc);
+ return rc;
+ }
+ group = rc;
+
+ /* Initialize global num_buckets value. */
+ if (network_cpus_count > 4)
+ num_buckets = 256;
+ else if (network_cpus_count > 1)
+ num_buckets = 16;
+
+ /* Allocate some buckets, and set global first_bucket value. */
+ rc = gxio_mpipe_alloc_buckets(&context, num_buckets, 0, 0);
+ if (rc < 0) {
+ netdev_err(dev, "gxio_mpipe_alloc_buckets failed: %d\n", rc);
+ return rc;
+ }
+ first_bucket = rc;
+
+ /* Init group and buckets. */
+ rc = gxio_mpipe_init_notif_group_and_buckets(
+ &context, group, ring, network_cpus_count,
+ first_bucket, num_buckets,
+ GXIO_MPIPE_BUCKET_STICKY_FLOW_LOCALITY);
+ if (rc != 0) {
+ netdev_err(
+ dev,
+ "gxio_mpipe_init_notif_group_and_buckets failed: %d\n",
+ rc);
+ return rc;
+ }
+
+ return 0;
+}
+
+/* Create an irq and register it, then activate the irq and request
+ * interrupts on all cores. Note that "ingress_irq" being initialized
+ * is how we know not to call tile_net_init_mpipe() again.
+ * This routine supports tile_net_init_mpipe(), below.
+ */
+static int tile_net_setup_interrupts(struct net_device *dev)
+{
+ int cpu, rc;
+
+ rc = create_irq();
+ if (rc < 0) {
+ netdev_err(dev, "create_irq failed: %d\n", rc);
+ return rc;
+ }
+ ingress_irq = rc;
+ tile_irq_activate(ingress_irq, TILE_IRQ_PERCPU);
+ rc = request_irq(ingress_irq, tile_net_handle_ingress_irq,
+ 0, NULL, NULL);
+ if (rc != 0) {
+ netdev_err(dev, "request_irq failed: %d\n", rc);
+ destroy_irq(ingress_irq);
+ ingress_irq = -1;
+ return rc;
+ }
+
+ for_each_online_cpu(cpu) {
+ struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
+ if (info->has_iqueue) {
+ gxio_mpipe_request_notif_ring_interrupt(
+ &context, cpu_x(cpu), cpu_y(cpu),
+ 1, ingress_irq, info->iqueue.ring);
+ }
+ }
+
+ return 0;
+}
+
+/* Undo any state set up partially by a failed call to tile_net_init_mpipe. */
+static void tile_net_init_mpipe_fail(void)
+{
+ int cpu;
+
+ /* Do cleanups that require the mpipe context first. */
+ if (small_buffer_stack >= 0)
+ tile_net_pop_all_buffers(small_buffer_stack);
+ if (large_buffer_stack >= 0)
+ tile_net_pop_all_buffers(large_buffer_stack);
+
+ /* Destroy mpipe context so the hardware no longer owns any memory. */
+ gxio_mpipe_destroy(&context);
+
+ for_each_online_cpu(cpu) {
+ struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
+ free_pages((unsigned long)(info->comps_for_echannel[0]),
+ get_order(COMPS_SIZE));
+ info->comps_for_echannel[0] = NULL;
+ free_pages((unsigned long)(info->iqueue.idescs),
+ get_order(NOTIF_RING_SIZE));
+ info->iqueue.idescs = NULL;
+ }
+
+ if (small_buffer_stack_va)
+ free_pages_exact(small_buffer_stack_va, buffer_stack_size);
+ if (large_buffer_stack_va)
+ free_pages_exact(large_buffer_stack_va, buffer_stack_size);
+
+ small_buffer_stack_va = NULL;
+ large_buffer_stack_va = NULL;
+ large_buffer_stack = -1;
+ small_buffer_stack = -1;
+ first_bucket = -1;
+}
+
+/* The first time any tilegx network device is opened, we initialize
+ * the global mpipe state. If this step fails, we fail to open the
+ * device, but if it succeeds, we never need to do it again, and since
+ * tile_net can't be unloaded, we never undo it.
+ *
+ * Note that some resources in this path (buffer stack indices,
+ * bindings from init_buffer_stack, etc.) are hypervisor resources
+ * that are freed implicitly by gxio_mpipe_destroy().
+ */
+static int tile_net_init_mpipe(struct net_device *dev)
+{
+ int i, num_buffers, rc;
+ int cpu;
+ int first_ring, ring;
+ int network_cpus_count = cpus_weight(network_cpus_map);
+
+ if (!hash_default) {
+ netdev_err(dev, "Networking requires hash_default!\n");
+ return -EIO;
+ }
+
+ rc = gxio_mpipe_init(&context, 0);
+ if (rc != 0) {
+ netdev_err(dev, "gxio_mpipe_init failed: %d\n", rc);
+ return -EIO;
+ }
+
+ /* Set up the buffer stacks. */
+ num_buffers =
+ network_cpus_count * (IQUEUE_ENTRIES + TILE_NET_BATCH);
+ rc = init_buffer_stacks(dev, num_buffers);
+ if (rc != 0)
+ goto fail;
+
+ /* Provide initial buffers. */
+ rc = -ENOMEM;
+ for (i = 0; i < num_buffers; i++) {
+ if (!tile_net_provide_buffer(true)) {
+ netdev_err(dev, "Cannot allocate initial sk_bufs!\n");
+ goto fail;
+ }
+ }
+ for (i = 0; i < num_buffers; i++) {
+ if (!tile_net_provide_buffer(false)) {
+ netdev_err(dev, "Cannot allocate initial sk_bufs!\n");
+ goto fail;
+ }
+ }
+
+ /* Allocate one NotifRing for each network cpu. */
+ rc = gxio_mpipe_alloc_notif_rings(&context, network_cpus_count, 0, 0);
+ if (rc < 0) {
+ netdev_err(dev, "gxio_mpipe_alloc_notif_rings failed %d\n",
+ rc);
+ goto fail;
+ }
+
+ /* Init NotifRings per-cpu. */
+ first_ring = rc;
+ ring = first_ring;
+ for_each_online_cpu(cpu) {
+ rc = alloc_percpu_mpipe_resources(dev, cpu, ring);
+ if (rc < 0)
+ goto fail;
+ ring = rc;
+ }
+
+ /* Initialize NotifGroup and buckets. */
+ rc = init_notif_group_and_buckets(dev, first_ring, network_cpus_count);
+ if (rc != 0)
+ goto fail;
+
+ /* Create and enable interrupts. */
+ rc = tile_net_setup_interrupts(dev);
+ if (rc != 0)
+ goto fail;
+
+ return 0;
+
+fail:
+ tile_net_init_mpipe_fail();
+ return rc;
+}
+
+/* Create persistent egress info for a given egress channel.
+ * Note that this may be shared between, say, "gbe0" and "xgbe0".
+ * ISSUE: Defer header allocation until TSO is actually needed?
+ */
+static int tile_net_init_egress(struct net_device *dev, int echannel)
+{
+ struct page *headers_page, *edescs_page, *equeue_page;
+ gxio_mpipe_edesc_t *edescs;
+ gxio_mpipe_equeue_t *equeue;
+ unsigned char *headers;
+ int headers_order, edescs_order, equeue_order;
+ size_t edescs_size;
+ int edma;
+ int rc = -ENOMEM;
+
+ /* Only initialize once. */
+ if (egress_for_echannel[echannel].equeue != NULL)
+ return 0;
+
+ /* Allocate memory for the "headers". */
+ headers_order = get_order(EQUEUE_ENTRIES * HEADER_BYTES);
+ headers_page = alloc_pages(GFP_KERNEL, headers_order);
+ if (headers_page == NULL) {
+ netdev_warn(dev,
+ "Could not alloc %zd bytes for TSO headers.\n",
+ PAGE_SIZE << headers_order);
+ goto fail;
+ }
+ headers = pfn_to_kaddr(page_to_pfn(headers_page));
+
+ /* Allocate memory for the "edescs". */
+ edescs_size = EQUEUE_ENTRIES * sizeof(*edescs);
+ edescs_order = get_order(edescs_size);
+ edescs_page = alloc_pages(GFP_KERNEL, edescs_order);
+ if (edescs_page == NULL) {
+ netdev_warn(dev,
+ "Could not alloc %zd bytes for eDMA ring.\n",
+ edescs_size);
+ goto fail_headers;
+ }
+ edescs = pfn_to_kaddr(page_to_pfn(edescs_page));
+
+ /* Allocate memory for the "equeue". */
+ equeue_order = get_order(sizeof(*equeue));
+ equeue_page = alloc_pages(GFP_KERNEL, equeue_order);
+ if (equeue_page == NULL) {
+ netdev_warn(dev,
+ "Could not alloc %zd bytes for equeue info.\n",
+ PAGE_SIZE << equeue_order);
+ goto fail_edescs;
+ }
+ equeue = pfn_to_kaddr(page_to_pfn(equeue_page));
+
+ /* Allocate an edma ring. Note that in practice this can't
+ * fail, which is good, because we will leak an edma ring if so.
+ */
+ rc = gxio_mpipe_alloc_edma_rings(&context, 1, 0, 0);
+ if (rc < 0) {
+ netdev_warn(dev, "gxio_mpipe_alloc_edma_rings failed: %d\n",
+ rc);
+ goto fail_equeue;
+ }
+ edma = rc;
+
+ /* Initialize the equeue. */
+ rc = gxio_mpipe_equeue_init(equeue, &context, edma, echannel,
+ edescs, edescs_size, 0);
+ if (rc != 0) {
+ netdev_err(dev, "gxio_mpipe_equeue_init failed: %d\n", rc);
+ goto fail_equeue;
+ }
+
+ /* Done. */
+ egress_for_echannel[echannel].equeue = equeue;
+ egress_for_echannel[echannel].headers = headers;
+ return 0;
+
+fail_equeue:
+ __free_pages(equeue_page, equeue_order);
+
+fail_edescs:
+ __free_pages(edescs_page, edescs_order);
+
+fail_headers:
+ __free_pages(headers_page, headers_order);
+
+fail:
+ return rc;
+}
+
+/* Return channel number for a newly-opened link. */
+static int tile_net_link_open(struct net_device *dev, gxio_mpipe_link_t *link,
+ const char *link_name)
+{
+ int rc = gxio_mpipe_link_open(link, &context, link_name, 0);
+ if (rc < 0) {
+ netdev_err(dev, "Failed to open '%s'\n", link_name);
+ return rc;
+ }
+ rc = gxio_mpipe_link_channel(link);
+ if (rc < 0 || rc >= TILE_NET_CHANNELS) {
+ netdev_err(dev, "gxio_mpipe_link_channel bad value: %d\n", rc);
+ gxio_mpipe_link_close(link);
+ return -EINVAL;
+ }
+ return rc;
+}
+
+/* Help the kernel activate the given network interface. */
+static int tile_net_open(struct net_device *dev)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+ int cpu, rc;
+
+ mutex_lock(&tile_net_devs_for_channel_mutex);
+
+ /* Do one-time initialization the first time any device is opened. */
+ if (ingress_irq < 0) {
+ rc = tile_net_init_mpipe(dev);
+ if (rc != 0)
+ goto fail;
+ }
+
+ /* Determine if this is the "loopify" device. */
+ if (unlikely((loopify_link_name != NULL) &&
+ !strcmp(dev->name, loopify_link_name))) {
+ rc = tile_net_link_open(dev, &priv->link, "loop0");
+ if (rc < 0)
+ goto fail;
+ priv->channel = rc;
+ rc = tile_net_link_open(dev, &priv->loopify_link, "loop1");
+ if (rc < 0)
+ goto fail;
+ priv->loopify_channel = rc;
+ priv->echannel = rc;
+ } else {
+ rc = tile_net_link_open(dev, &priv->link, dev->name);
+ if (rc < 0)
+ goto fail;
+ priv->channel = rc;
+ priv->echannel = rc;
+ }
+
+ /* Initialize egress info (if needed). Once ever, per echannel. */
+ rc = tile_net_init_egress(dev, priv->echannel);
+ if (rc != 0)
+ goto fail;
+
+ tile_net_devs_for_channel[priv->channel] = dev;
+
+ rc = tile_net_update(dev);
+ if (rc != 0)
+ goto fail;
+
+ mutex_unlock(&tile_net_devs_for_channel_mutex);
+
+ /* Initialize the transmit wake timer for this device for each cpu. */
+ for_each_online_cpu(cpu) {
+ struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
+ struct tile_net_tx_wake *tx_wake =
+ &info->tx_wake[priv->echannel];
+
+ hrtimer_init(&tx_wake->timer, CLOCK_MONOTONIC,
+ HRTIMER_MODE_REL);
+ tx_wake->timer.function = tile_net_handle_tx_wake_timer;
+ tx_wake->dev = dev;
+ }
+
+ for_each_online_cpu(cpu)
+ netif_start_subqueue(dev, cpu);
+ netif_carrier_on(dev);
+ return 0;
+
+fail:
+ if (priv->loopify_channel >= 0) {
+ if (gxio_mpipe_link_close(&priv->loopify_link) != 0)
+ netdev_warn(dev, "Failed to close loopify link!\n");
+ priv->loopify_channel = -1;
+ }
+ if (priv->channel >= 0) {
+ if (gxio_mpipe_link_close(&priv->link) != 0)
+ netdev_warn(dev, "Failed to close link!\n");
+ priv->channel = -1;
+ }
+ priv->echannel = -1;
+ tile_net_devs_for_channel[priv->channel] = NULL;
+ mutex_unlock(&tile_net_devs_for_channel_mutex);
+
+ /* Don't return raw gxio error codes to generic Linux. */
+ return (rc > -512) ? rc : -EIO;
+}
+
+/* Help the kernel deactivate the given network interface. */
+static int tile_net_stop(struct net_device *dev)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+ int cpu;
+
+ for_each_online_cpu(cpu) {
+ struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
+ struct tile_net_tx_wake *tx_wake =
+ &info->tx_wake[priv->echannel];
+
+ hrtimer_cancel(&tx_wake->timer);
+ netif_stop_subqueue(dev, cpu);
+ }
+
+ mutex_lock(&tile_net_devs_for_channel_mutex);
+ tile_net_devs_for_channel[priv->channel] = NULL;
+ (void)tile_net_update(dev);
+ if (priv->loopify_channel >= 0) {
+ if (gxio_mpipe_link_close(&priv->loopify_link) != 0)
+ netdev_warn(dev, "Failed to close loopify link!\n");
+ priv->loopify_channel = -1;
+ }
+ if (priv->channel >= 0) {
+ if (gxio_mpipe_link_close(&priv->link) != 0)
+ netdev_warn(dev, "Failed to close link!\n");
+ priv->channel = -1;
+ }
+ priv->echannel = -1;
+ mutex_unlock(&tile_net_devs_for_channel_mutex);
+
+ return 0;
+}
+
+/* Determine the VA for a fragment. */
+static inline void *tile_net_frag_buf(skb_frag_t *f)
+{
+ unsigned long pfn = page_to_pfn(skb_frag_page(f));
+ return pfn_to_kaddr(pfn) + f->page_offset;
+}
+
+/* Acquire a completion entry and an egress slot, or if we can't,
+ * stop the queue and schedule the tx_wake timer.
+ */
+static s64 tile_net_equeue_try_reserve(struct net_device *dev,
+ struct tile_net_comps *comps,
+ gxio_mpipe_equeue_t *equeue,
+ int num_edescs)
+{
+ /* Try to acquire a completion entry. */
+ if (comps->comp_next - comps->comp_last < TILE_NET_MAX_COMPS - 1 ||
+ tile_net_free_comps(equeue, comps, 32, false) != 0) {
+
+ /* Try to acquire an egress slot. */
+ s64 slot = gxio_mpipe_equeue_try_reserve(equeue, num_edescs);
+ if (slot >= 0)
+ return slot;
+
+ /* Freeing some completions gives the equeue time to drain. */
+ tile_net_free_comps(equeue, comps, TILE_NET_MAX_COMPS, false);
+
+ slot = gxio_mpipe_equeue_try_reserve(equeue, num_edescs);
+ if (slot >= 0)
+ return slot;
+ }
+
+ /* Still nothing; give up and stop the queue for a short while. */
+ netif_stop_subqueue(dev, smp_processor_id());
+ tile_net_schedule_tx_wake_timer(dev);
+ return -1;
+}
+
+/* Determine how many edesc's are needed for TSO.
+ *
+ * Sometimes, if "sendfile()" requires copying, we will be called with
+ * "data" containing the header and payload, with "frags" being empty.
+ * Sometimes, for example when using NFS over TCP, a single segment can
+ * span 3 fragments. This requires special care.
+ */
+static int tso_count_edescs(struct sk_buff *skb)
+{
+ struct skb_shared_info *sh = skb_shinfo(skb);
+ unsigned int data_len = skb->data_len;
+ unsigned int p_len = sh->gso_size;
+ long f_id = -1; /* id of the current fragment */
+ long f_size = -1; /* size of the current fragment */
+ long f_used = -1; /* bytes used from the current fragment */
+ long n; /* size of the current piece of payload */
+ int num_edescs = 0;
+ int segment;
+
+ for (segment = 0; segment < sh->gso_segs; segment++) {
+
+ unsigned int p_used = 0;
+
+ /* One edesc for header and for each piece of the payload. */
+ for (num_edescs++; p_used < p_len; num_edescs++) {
+
+ /* Advance as needed. */
+ while (f_used >= f_size) {
+ f_id++;
+ f_size = sh->frags[f_id].size;
+ f_used = 0;
+ }
+
+ /* Use bytes from the current fragment. */
+ n = p_len - p_used;
+ if (n > f_size - f_used)
+ n = f_size - f_used;
+ f_used += n;
+ p_used += n;
+ }
+
+ /* The last segment may be less than gso_size. */
+ data_len -= p_len;
+ if (data_len < p_len)
+ p_len = data_len;
+ }
+
+ return num_edescs;
+}
+
+/* Prepare modified copies of the skbuff headers.
+ * FIXME: add support for IPv6.
+ */
+static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers,
+ s64 slot)
+{
+ struct skb_shared_info *sh = skb_shinfo(skb);
+ struct iphdr *ih;
+ struct tcphdr *th;
+ unsigned int data_len = skb->data_len;
+ unsigned char *data = skb->data;
+ unsigned int ih_off, th_off, sh_len, p_len;
+ unsigned int isum_seed, tsum_seed, id, seq;
+ long f_id = -1; /* id of the current fragment */
+ long f_size = -1; /* size of the current fragment */
+ long f_used = -1; /* bytes used from the current fragment */
+ long n; /* size of the current piece of payload */
+ int segment;
+
+ /* Locate original headers and compute various lengths. */
+ ih = ip_hdr(skb);
+ th = tcp_hdr(skb);
+ ih_off = skb_network_offset(skb);
+ th_off = skb_transport_offset(skb);
+ sh_len = th_off + tcp_hdrlen(skb);
+ p_len = sh->gso_size;
+
+ /* Set up seed values for IP and TCP csum and initialize id and seq. */
+ isum_seed = ((0xFFFF - ih->check) +
+ (0xFFFF - ih->tot_len) +
+ (0xFFFF - ih->id));
+ tsum_seed = th->check + (0xFFFF ^ htons(skb->len));
+ id = ntohs(ih->id);
+ seq = ntohl(th->seq);
+
+ /* Prepare all the headers. */
+ for (segment = 0; segment < sh->gso_segs; segment++) {
+ unsigned char *buf;
+ unsigned int p_used = 0;
+
+ /* Copy to the header memory for this segment. */
+ buf = headers + (slot % EQUEUE_ENTRIES) * HEADER_BYTES +
+ NET_IP_ALIGN;
+ memcpy(buf, data, sh_len);
+
+ /* Update copied ip header. */
+ ih = (struct iphdr *)(buf + ih_off);
+ ih->tot_len = htons(sh_len + p_len - ih_off);
+ ih->id = htons(id);
+ ih->check = csum_long(isum_seed + ih->tot_len +
+ ih->id) ^ 0xffff;
+
+ /* Update copied tcp header. */
+ th = (struct tcphdr *)(buf + th_off);
+ th->seq = htonl(seq);
+ th->check = csum_long(tsum_seed + htons(sh_len + p_len));
+ if (segment != sh->gso_segs - 1) {
+ th->fin = 0;
+ th->psh = 0;
+ }
+
+ /* Skip past the header. */
+ slot++;
+
+ /* Skip past the payload. */
+ while (p_used < p_len) {
+
+ /* Advance as needed. */
+ while (f_used >= f_size) {
+ f_id++;
+ f_size = sh->frags[f_id].size;
+ f_used = 0;
+ }
+
+ /* Use bytes from the current fragment. */
+ n = p_len - p_used;
+ if (n > f_size - f_used)
+ n = f_size - f_used;
+ f_used += n;
+ p_used += n;
+
+ slot++;
+ }
+
+ id++;
+ seq += p_len;
+
+ /* The last segment may be less than gso_size. */
+ data_len -= p_len;
+ if (data_len < p_len)
+ p_len = data_len;
+ }
+
+ /* Flush the headers so they are ready for hardware DMA. */
+ wmb();
+}
+
+/* Pass all the data to mpipe for egress. */
+static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue,
+ struct sk_buff *skb, unsigned char *headers, s64 slot)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+ struct skb_shared_info *sh = skb_shinfo(skb);
+ unsigned int data_len = skb->data_len;
+ unsigned int p_len = sh->gso_size;
+ gxio_mpipe_edesc_t edesc_head = { { 0 } };
+ gxio_mpipe_edesc_t edesc_body = { { 0 } };
+ long f_id = -1; /* id of the current fragment */
+ long f_size = -1; /* size of the current fragment */
+ long f_used = -1; /* bytes used from the current fragment */
+ long n; /* size of the current piece of payload */
+ unsigned long tx_packets = 0, tx_bytes = 0;
+ unsigned int csum_start, sh_len;
+ int segment;
+
+ /* Prepare to egress the headers: set up header edesc. */
+ csum_start = skb_checksum_start_offset(skb);
+ sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ edesc_head.csum = 1;
+ edesc_head.csum_start = csum_start;
+ edesc_head.csum_dest = csum_start + skb->csum_offset;
+ edesc_head.xfer_size = sh_len;
+
+ /* This is only used to specify the TLB. */
+ edesc_head.stack_idx = large_buffer_stack;
+ edesc_body.stack_idx = large_buffer_stack;
+
+ /* Egress all the edescs. */
+ for (segment = 0; segment < sh->gso_segs; segment++) {
+ void *va;
+ unsigned char *buf;
+ unsigned int p_used = 0;
+
+ /* Egress the header. */
+ buf = headers + (slot % EQUEUE_ENTRIES) * HEADER_BYTES +
+ NET_IP_ALIGN;
+ edesc_head.va = va_to_tile_io_addr(buf);
+ gxio_mpipe_equeue_put_at(equeue, edesc_head, slot);
+ slot++;
+
+ /* Egress the payload. */
+ while (p_used < p_len) {
+
+ /* Advance as needed. */
+ while (f_used >= f_size) {
+ f_id++;
+ f_size = sh->frags[f_id].size;
+ f_used = 0;
+ }
+
+ va = tile_net_frag_buf(&sh->frags[f_id]) + f_used;
+
+ /* Use bytes from the current fragment. */
+ n = p_len - p_used;
+ if (n > f_size - f_used)
+ n = f_size - f_used;
+ f_used += n;
+ p_used += n;
+
+ /* Egress a piece of the payload. */
+ edesc_body.va = va_to_tile_io_addr(va);
+ edesc_body.xfer_size = n;
+ edesc_body.bound = !(p_used < p_len);
+ gxio_mpipe_equeue_put_at(equeue, edesc_body, slot);
+ slot++;
+ }
+
+ tx_packets++;
+ tx_bytes += sh_len + p_len;
+
+ /* The last segment may be less than gso_size. */
+ data_len -= p_len;
+ if (data_len < p_len)
+ p_len = data_len;
+ }
+
+ /* Update stats. */
+ tile_net_stats_add(tx_packets, &priv->stats.tx_packets);
+ tile_net_stats_add(tx_bytes, &priv->stats.tx_bytes);
+}
+
+/* Do "TSO" handling for egress.
+ *
+ * Normally drivers set NETIF_F_TSO only to support hardware TSO;
+ * otherwise the stack uses scatter-gather to implement GSO in software.
+ * On our testing, enabling GSO support (via NETIF_F_SG) drops network
+ * performance down to around 7.5 Gbps on the 10G interfaces, although
+ * also dropping cpu utilization way down, to under 8%. But
+ * implementing "TSO" in the driver brings performance back up to line
+ * rate, while dropping cpu usage even further, to less than 4%. In
+ * practice, profiling of GSO shows that skb_segment() is what causes
+ * the performance overheads; we benefit in the driver from using
+ * preallocated memory to duplicate the TCP/IP headers.
+ */
+static int tile_net_tx_tso(struct sk_buff *skb, struct net_device *dev)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ struct tile_net_priv *priv = netdev_priv(dev);
+ int channel = priv->echannel;
+ struct tile_net_egress *egress = &egress_for_echannel[channel];
+ struct tile_net_comps *comps = info->comps_for_echannel[channel];
+ gxio_mpipe_equeue_t *equeue = egress->equeue;
+ unsigned long irqflags;
+ int num_edescs;
+ s64 slot;
+
+ /* Determine how many mpipe edesc's are needed. */
+ num_edescs = tso_count_edescs(skb);
+
+ local_irq_save(irqflags);
+
+ /* Try to acquire a completion entry and an egress slot. */
+ slot = tile_net_equeue_try_reserve(dev, comps, equeue, num_edescs);
+ if (slot < 0) {
+ local_irq_restore(irqflags);
+ return NETDEV_TX_BUSY;
+ }
+
+ /* Set up copies of header data properly. */
+ tso_headers_prepare(skb, egress->headers, slot);
+
+ /* Actually pass the data to the network hardware. */
+ tso_egress(dev, equeue, skb, egress->headers, slot);
+
+ /* Add a completion record. */
+ add_comp(equeue, comps, slot + num_edescs - 1, skb);
+
+ local_irq_restore(irqflags);
+
+ /* Make sure the egress timer is scheduled. */
+ tile_net_schedule_egress_timer();
+
+ return NETDEV_TX_OK;
+}
+
+/* Analyze the body and frags for a transmit request. */
+static unsigned int tile_net_tx_frags(struct frag *frags,
+ struct sk_buff *skb,
+ void *b_data, unsigned int b_len)
+{
+ unsigned int i, n = 0;
+
+ struct skb_shared_info *sh = skb_shinfo(skb);
+
+ if (b_len != 0) {
+ frags[n].buf = b_data;
+ frags[n++].length = b_len;
+ }
+
+ for (i = 0; i < sh->nr_frags; i++) {
+ skb_frag_t *f = &sh->frags[i];
+ frags[n].buf = tile_net_frag_buf(f);
+ frags[n++].length = skb_frag_size(f);
+ }
+
+ return n;
+}
+
+/* Help the kernel transmit a packet. */
+static int tile_net_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ struct tile_net_priv *priv = netdev_priv(dev);
+ struct tile_net_egress *egress = &egress_for_echannel[priv->echannel];
+ gxio_mpipe_equeue_t *equeue = egress->equeue;
+ struct tile_net_comps *comps =
+ info->comps_for_echannel[priv->echannel];
+ unsigned int len = skb->len;
+ unsigned char *data = skb->data;
+ unsigned int num_edescs;
+ struct frag frags[MAX_FRAGS];
+ gxio_mpipe_edesc_t edescs[MAX_FRAGS];
+ unsigned long irqflags;
+ gxio_mpipe_edesc_t edesc = { { 0 } };
+ unsigned int i;
+ s64 slot;
+
+ if (skb_is_gso(skb))
+ return tile_net_tx_tso(skb, dev);
+
+ num_edescs = tile_net_tx_frags(frags, skb, data, skb_headlen(skb));
+
+ /* This is only used to specify the TLB. */
+ edesc.stack_idx = large_buffer_stack;
+
+ /* Prepare the edescs. */
+ for (i = 0; i < num_edescs; i++) {
+ edesc.xfer_size = frags[i].length;
+ edesc.va = va_to_tile_io_addr(frags[i].buf);
+ edescs[i] = edesc;
+ }
+
+ /* Mark the final edesc. */
+ edescs[num_edescs - 1].bound = 1;
+
+ /* Add checksum info to the initial edesc, if needed. */
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ unsigned int csum_start = skb_checksum_start_offset(skb);
+ edescs[0].csum = 1;
+ edescs[0].csum_start = csum_start;
+ edescs[0].csum_dest = csum_start + skb->csum_offset;
+ }
+
+ local_irq_save(irqflags);
+
+ /* Try to acquire a completion entry and an egress slot. */
+ slot = tile_net_equeue_try_reserve(dev, comps, equeue, num_edescs);
+ if (slot < 0) {
+ local_irq_restore(irqflags);
+ return NETDEV_TX_BUSY;
+ }
+
+ for (i = 0; i < num_edescs; i++)
+ gxio_mpipe_equeue_put_at(equeue, edescs[i], slot++);
+
+ /* Add a completion record. */
+ add_comp(equeue, comps, slot - 1, skb);
+
+ /* NOTE: Use ETH_ZLEN for short packets (e.g. 42 < 60). */
+ tile_net_stats_add(1, &priv->stats.tx_packets);
+ tile_net_stats_add(max_t(unsigned int, len, ETH_ZLEN),
+ &priv->stats.tx_bytes);
+
+ local_irq_restore(irqflags);
+
+ /* Make sure the egress timer is scheduled. */
+ tile_net_schedule_egress_timer();
+
+ return NETDEV_TX_OK;
+}
+
+/* Return subqueue id on this core (one per core). */
+static u16 tile_net_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+ return smp_processor_id();
+}
+
+/* Deal with a transmit timeout. */
+static void tile_net_tx_timeout(struct net_device *dev)
+{
+ int cpu;
+
+ for_each_online_cpu(cpu)
+ netif_wake_subqueue(dev, cpu);
+}
+
+/* Ioctl commands. */
+static int tile_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ return -EOPNOTSUPP;
+}
+
+/* Get system network statistics for device. */
+static struct net_device_stats *tile_net_get_stats(struct net_device *dev)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+ return &priv->stats;
+}
+
+/* Change the MTU. */
+static int tile_net_change_mtu(struct net_device *dev, int new_mtu)
+{
+ if ((new_mtu < 68) || (new_mtu > 1500))
+ return -EINVAL;
+ dev->mtu = new_mtu;
+ return 0;
+}
+
+/* Change the Ethernet address of the NIC.
+ *
+ * The hypervisor driver does not support changing MAC address. However,
+ * the hardware does not do anything with the MAC address, so the address
+ * which gets used on outgoing packets, and which is accepted on incoming
+ * packets, is completely up to us.
+ *
+ * Returns 0 on success, negative on failure.
+ */
+static int tile_net_set_mac_address(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EINVAL;
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void tile_net_netpoll(struct net_device *dev)
+{
+ disable_percpu_irq(ingress_irq);
+ tile_net_handle_ingress_irq(ingress_irq, NULL);
+ enable_percpu_irq(ingress_irq, 0);
+}
+#endif
+
+static const struct net_device_ops tile_net_ops = {
+ .ndo_open = tile_net_open,
+ .ndo_stop = tile_net_stop,
+ .ndo_start_xmit = tile_net_tx,
+ .ndo_select_queue = tile_net_select_queue,
+ .ndo_do_ioctl = tile_net_ioctl,
+ .ndo_get_stats = tile_net_get_stats,
+ .ndo_change_mtu = tile_net_change_mtu,
+ .ndo_tx_timeout = tile_net_tx_timeout,
+ .ndo_set_mac_address = tile_net_set_mac_address,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = tile_net_netpoll,
+#endif
+};
+
+/* The setup function.
+ *
+ * This uses ether_setup() to assign various fields in dev, including
+ * setting IFF_BROADCAST and IFF_MULTICAST, then sets some extra fields.
+ */
+static void tile_net_setup(struct net_device *dev)
+{
+ ether_setup(dev);
+ dev->netdev_ops = &tile_net_ops;
+ dev->watchdog_timeo = TILE_NET_TIMEOUT;
+ dev->features |= NETIF_F_LLTX;
+ dev->features |= NETIF_F_HW_CSUM;
+ dev->features |= NETIF_F_SG;
+ dev->features |= NETIF_F_TSO;
+ dev->mtu = 1500;
+}
+
+/* Allocate the device structure, register the device, and obtain the
+ * MAC address from the hypervisor.
+ */
+static void tile_net_dev_init(const char *name, const uint8_t *mac)
+{
+ int ret;
+ int i;
+ int nz_addr = 0;
+ struct net_device *dev;
+ struct tile_net_priv *priv;
+
+ /* HACK: Ignore "loop" links. */
+ if (strncmp(name, "loop", 4) == 0)
+ return;
+
+ /* Allocate the device structure. Normally, "name" is a
+ * template, instantiated by register_netdev(), but not for us.
+ */
+ dev = alloc_netdev_mqs(sizeof(*priv), name, tile_net_setup,
+ NR_CPUS, 1);
+ if (!dev) {
+ pr_err("alloc_netdev_mqs(%s) failed\n", name);
+ return;
+ }
+
+ /* Initialize "priv". */
+ priv = netdev_priv(dev);
+ memset(priv, 0, sizeof(*priv));
+ priv->dev = dev;
+ priv->channel = -1;
+ priv->loopify_channel = -1;
+ priv->echannel = -1;
+
+ /* Get the MAC address and set it in the device struct; this must
+ * be done before the device is opened. If the MAC is all zeroes,
+ * we use a random address, since we're probably on the simulator.
+ */
+ for (i = 0; i < 6; i++)
+ nz_addr |= mac[i];
+
+ if (nz_addr) {
+ memcpy(dev->dev_addr, mac, 6);
+ dev->addr_len = 6;
+ } else {
+ random_ether_addr(dev->dev_addr);
+ }
+
+ /* Register the network device. */
+ ret = register_netdev(dev);
+ if (ret) {
+ netdev_err(dev, "register_netdev failed %d\n", ret);
+ free_netdev(dev);
+ return;
+ }
+}
+
+/* Per-cpu module initialization. */
+static void tile_net_init_module_percpu(void *unused)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ int my_cpu = smp_processor_id();
+
+ info->has_iqueue = false;
+
+ info->my_cpu = my_cpu;
+
+ /* Initialize the egress timer. */
+ hrtimer_init(&info->egress_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ info->egress_timer.function = tile_net_handle_egress_timer;
+}
+
+/* Module initialization. */
+static int __init tile_net_init_module(void)
+{
+ int i;
+ char name[GXIO_MPIPE_LINK_NAME_LEN];
+ uint8_t mac[6];
+
+ pr_info("Tilera Network Driver\n");
+
+ mutex_init(&tile_net_devs_for_channel_mutex);
+
+ /* Initialize each CPU. */
+ on_each_cpu(tile_net_init_module_percpu, NULL, 1);
+
+ /* Find out what devices we have, and initialize them. */
+ for (i = 0; gxio_mpipe_link_enumerate_mac(i, name, mac) >= 0; i++)
+ tile_net_dev_init(name, mac);
+
+ if (!network_cpus_init())
+ network_cpus_map = *cpu_online_mask;
+
+ return 0;
+}
+
+module_init(tile_net_init_module);
diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index 4ffcd57..2857ab07 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -478,6 +478,7 @@
u32 nvsp_version;
atomic_t num_outstanding_sends;
+ wait_queue_head_t wait_drain;
bool start_remove;
bool destroy;
/*
diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index 8b91947..0c56983 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -42,6 +42,7 @@
if (!net_device)
return NULL;
+ init_waitqueue_head(&net_device->wait_drain);
net_device->start_remove = false;
net_device->destroy = false;
net_device->dev = device;
@@ -387,12 +388,8 @@
spin_unlock_irqrestore(&device->channel->inbound_lock, flags);
/* Wait for all send completions */
- while (atomic_read(&net_device->num_outstanding_sends)) {
- dev_info(&device->device,
- "waiting for %d requests to complete...\n",
- atomic_read(&net_device->num_outstanding_sends));
- udelay(100);
- }
+ wait_event(net_device->wait_drain,
+ atomic_read(&net_device->num_outstanding_sends) == 0);
netvsc_disconnect_vsp(net_device);
@@ -486,6 +483,9 @@
num_outstanding_sends =
atomic_dec_return(&net_device->num_outstanding_sends);
+ if (net_device->destroy && num_outstanding_sends == 0)
+ wake_up(&net_device->wait_drain);
+
if (netif_queue_stopped(ndev) && !net_device->start_remove &&
(hv_ringbuf_avail_percent(&device->channel->outbound)
> RING_AVAIL_PERCENT_HIWATER ||
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index 5ac46f5..47f8e89 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -41,6 +41,8 @@
#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */
#define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */
#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */
+#define IP101A_G_IRQ_PIN_USED (1<<15) /* INTR pin used */
+#define IP101A_G_IRQ_DEFAULT IP101A_G_IRQ_PIN_USED
static int ip175c_config_init(struct phy_device *phydev)
{
@@ -136,6 +138,11 @@
if (c < 0)
return c;
+ /* INTR pin used: speed/link/duplex will cause an interrupt */
+ c = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, IP101A_G_IRQ_DEFAULT);
+ if (c < 0)
+ return c;
+
if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
/* Additional delay (2ns) used to adjust RX clock phase
* at RGMII interface */
diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c
index 39ea067..5c12018 100644
--- a/drivers/net/phy/mdio-mux.c
+++ b/drivers/net/phy/mdio-mux.c
@@ -46,7 +46,13 @@
struct mdio_mux_parent_bus *pb = cb->parent;
int r;
- mutex_lock(&pb->mii_bus->mdio_lock);
+ /* In theory multiple mdio_mux could be stacked, thus creating
+ * more than a single level of nesting. But in practice,
+ * SINGLE_DEPTH_NESTING will cover the vast majority of use
+ * cases. We use it, instead of trying to handle the general
+ * case.
+ */
+ mutex_lock_nested(&pb->mii_bus->mdio_lock, SINGLE_DEPTH_NESTING);
r = pb->switch_fn(pb->current_child, cb->bus_number, pb->switch_data);
if (r)
goto out;
@@ -71,7 +77,7 @@
int r;
- mutex_lock(&pb->mii_bus->mdio_lock);
+ mutex_lock_nested(&pb->mii_bus->mdio_lock, SINGLE_DEPTH_NESTING);
r = pb->switch_fn(pb->current_child, cb->bus_number, pb->switch_data);
if (r)
goto out;
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 683ef1c..5061608 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -96,7 +96,7 @@
}
/**
* of_mdio_find_bus - Given an mii_bus node, find the mii_bus.
- * @mdio_np: Pointer to the mii_bus.
+ * @mdio_bus_np: Pointer to the mii_bus.
*
* Returns a pointer to the mii_bus, or NULL if none found.
*
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 590f902..9d6c80c 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -161,7 +161,7 @@
static struct phy_driver ks8001_driver = {
.phy_id = PHY_ID_KS8001,
.name = "Micrel KS8001 or KS8721",
- .phy_id_mask = 0x00fffff0,
+ .phy_id_mask = 0x00ffffff,
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.config_init = kszphy_config_init,
@@ -174,7 +174,7 @@
static struct phy_driver ksz9021_driver = {
.phy_id = PHY_ID_KSZ9021,
- .phy_id_mask = 0x000fff10,
+ .phy_id_mask = 0x000ffffe,
.name = "Micrel KSZ9021 Gigabit PHY",
.features = (PHY_GBIT_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
@@ -240,8 +240,8 @@
MODULE_LICENSE("GPL");
static struct mdio_device_id __maybe_unused micrel_tbl[] = {
- { PHY_ID_KSZ9021, 0x000fff10 },
- { PHY_ID_KS8001, 0x00fffff0 },
+ { PHY_ID_KSZ9021, 0x000ffffe },
+ { PHY_ID_KS8001, 0x00ffffff },
{ PHY_ID_KS8737, 0x00fffff0 },
{ PHY_ID_KS8041, 0x00fffff0 },
{ PHY_ID_KS8051, 0x00fffff0 },
diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index 964031e..a28a983d 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -59,6 +59,7 @@
#define USB_PRODUCT_IPHONE_3G 0x1292
#define USB_PRODUCT_IPHONE_3GS 0x1294
#define USB_PRODUCT_IPHONE_4 0x1297
+#define USB_PRODUCT_IPAD 0x129a
#define USB_PRODUCT_IPHONE_4_VZW 0x129c
#define USB_PRODUCT_IPHONE_4S 0x12a0
@@ -101,6 +102,10 @@
IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
IPHETH_USBINTF_PROTO) },
{ USB_DEVICE_AND_INTERFACE_INFO(
+ USB_VENDOR_APPLE, USB_PRODUCT_IPAD,
+ IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+ IPHETH_USBINTF_PROTO) },
+ { USB_DEVICE_AND_INTERFACE_INFO(
USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW,
IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
IPHETH_USBINTF_PROTO) },
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 3b20678..a051ced 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -197,6 +197,10 @@
static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
{
struct usbnet *dev = usb_get_intfdata(intf);
+
+ /* can be called while disconnecting */
+ if (!dev)
+ return 0;
return qmi_wwan_manage_power(dev, on);
}
@@ -257,29 +261,6 @@
return rv;
}
-/* Gobi devices uses identical class/protocol codes for all interfaces regardless
- * of function. Some of these are CDC ACM like and have the exact same endpoints
- * we are looking for. This leaves two possible strategies for identifying the
- * correct interface:
- * a) hardcoding interface number, or
- * b) use the fact that the wwan interface is the only one lacking additional
- * (CDC functional) descriptors
- *
- * Let's see if we can get away with the generic b) solution.
- */
-static int qmi_wwan_bind_gobi(struct usbnet *dev, struct usb_interface *intf)
-{
- int rv = -EINVAL;
-
- /* ignore any interface with additional descriptors */
- if (intf->cur_altsetting->extralen)
- goto err;
-
- rv = qmi_wwan_bind_shared(dev, intf);
-err:
- return rv;
-}
-
static void qmi_wwan_unbind_shared(struct usbnet *dev, struct usb_interface *intf)
{
struct usb_driver *subdriver = (void *)dev->data[0];
@@ -347,15 +328,15 @@
.manage_power = qmi_wwan_manage_power,
};
-static const struct driver_info qmi_wwan_gobi = {
- .description = "Qualcomm Gobi wwan/QMI device",
+static const struct driver_info qmi_wwan_force_int0 = {
+ .description = "Qualcomm WWAN/QMI device",
.flags = FLAG_WWAN,
- .bind = qmi_wwan_bind_gobi,
+ .bind = qmi_wwan_bind_shared,
.unbind = qmi_wwan_unbind_shared,
.manage_power = qmi_wwan_manage_power,
+ .data = BIT(0), /* interface whitelist bitmap */
};
-/* ZTE suck at making USB descriptors */
static const struct driver_info qmi_wwan_force_int1 = {
.description = "Qualcomm WWAN/QMI device",
.flags = FLAG_WWAN,
@@ -365,6 +346,24 @@
.data = BIT(1), /* interface whitelist bitmap */
};
+static const struct driver_info qmi_wwan_force_int2 = {
+ .description = "Qualcomm WWAN/QMI device",
+ .flags = FLAG_WWAN,
+ .bind = qmi_wwan_bind_shared,
+ .unbind = qmi_wwan_unbind_shared,
+ .manage_power = qmi_wwan_manage_power,
+ .data = BIT(2), /* interface whitelist bitmap */
+};
+
+static const struct driver_info qmi_wwan_force_int3 = {
+ .description = "Qualcomm WWAN/QMI device",
+ .flags = FLAG_WWAN,
+ .bind = qmi_wwan_bind_shared,
+ .unbind = qmi_wwan_unbind_shared,
+ .manage_power = qmi_wwan_manage_power,
+ .data = BIT(3), /* interface whitelist bitmap */
+};
+
static const struct driver_info qmi_wwan_force_int4 = {
.description = "Qualcomm WWAN/QMI device",
.flags = FLAG_WWAN,
@@ -390,16 +389,23 @@
static const struct driver_info qmi_wwan_sierra = {
.description = "Sierra Wireless wwan/QMI device",
.flags = FLAG_WWAN,
- .bind = qmi_wwan_bind_gobi,
+ .bind = qmi_wwan_bind_shared,
.unbind = qmi_wwan_unbind_shared,
.manage_power = qmi_wwan_manage_power,
.data = BIT(8) | BIT(19), /* interface whitelist bitmap */
};
#define HUAWEI_VENDOR_ID 0x12D1
+
+/* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */
+#define QMI_GOBI1K_DEVICE(vend, prod) \
+ USB_DEVICE(vend, prod), \
+ .driver_info = (unsigned long)&qmi_wwan_force_int3
+
+/* Gobi 2000 and Gobi 3000 QMI/wwan interface number is 0 according to qcserial */
#define QMI_GOBI_DEVICE(vend, prod) \
USB_DEVICE(vend, prod), \
- .driver_info = (unsigned long)&qmi_wwan_gobi
+ .driver_info = (unsigned long)&qmi_wwan_force_int0
static const struct usb_device_id products[] = {
{ /* Huawei E392, E398 and possibly others sharing both device id and more... */
@@ -501,6 +507,15 @@
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_force_int4,
},
+ { /* ZTE MF60 */
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x19d2,
+ .idProduct = 0x1402,
+ .bInterfaceClass = 0xff,
+ .bInterfaceSubClass = 0xff,
+ .bInterfaceProtocol = 0xff,
+ .driver_info = (unsigned long)&qmi_wwan_force_int2,
+ },
{ /* Sierra Wireless MC77xx in QMI mode */
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x1199,
@@ -510,20 +525,24 @@
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_sierra,
},
- {QMI_GOBI_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
- {QMI_GOBI_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
- {QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */
- {QMI_GOBI_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
- {QMI_GOBI_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
- {QMI_GOBI_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
- {QMI_GOBI_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */
+
+ /* Gobi 1000 devices */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
+ {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
+ {QMI_GOBI1K_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */
+ {QMI_GOBI1K_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */
+
+ /* Gobi 2000 and 3000 devices */
{QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */
{QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */
{QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */
diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c
index 3faef56..d75d1f5 100644
--- a/drivers/net/usb/sierra_net.c
+++ b/drivers/net/usb/sierra_net.c
@@ -946,7 +946,7 @@
}
static const u8 sierra_net_ifnum_list[] = { 7, 10, 11 };
-static const struct sierra_net_info_data sierra_net_info_data_68A3 = {
+static const struct sierra_net_info_data sierra_net_info_data_direct_ip = {
.rx_urb_size = 8 * 1024,
.whitelist = {
.infolen = ARRAY_SIZE(sierra_net_ifnum_list),
@@ -954,7 +954,7 @@
}
};
-static const struct driver_info sierra_net_info_68A3 = {
+static const struct driver_info sierra_net_info_direct_ip = {
.description = "Sierra Wireless USB-to-WWAN Modem",
.flags = FLAG_WWAN | FLAG_SEND_ZLP,
.bind = sierra_net_bind,
@@ -962,12 +962,18 @@
.status = sierra_net_status,
.rx_fixup = sierra_net_rx_fixup,
.tx_fixup = sierra_net_tx_fixup,
- .data = (unsigned long)&sierra_net_info_data_68A3,
+ .data = (unsigned long)&sierra_net_info_data_direct_ip,
};
static const struct usb_device_id products[] = {
{USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */
- .driver_info = (unsigned long) &sierra_net_info_68A3},
+ .driver_info = (unsigned long) &sierra_net_info_direct_ip},
+ {USB_DEVICE(0x0F3D, 0x68A3), /* AT&T Direct IP modem */
+ .driver_info = (unsigned long) &sierra_net_info_direct_ip},
+ {USB_DEVICE(0x1199, 0x68AA), /* Sierra Wireless Direct IP LTE modem */
+ .driver_info = (unsigned long) &sierra_net_info_direct_ip},
+ {USB_DEVICE(0x0F3D, 0x68AA), /* AT&T Direct IP LTE modem */
+ .driver_info = (unsigned long) &sierra_net_info_direct_ip},
{}, /* last item */
};
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 9f58330..aba769d 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -796,11 +796,13 @@
if (info->manage_power) {
retval = info->manage_power(dev, 1);
if (retval < 0)
- goto done;
+ goto done_manage_power_error;
usb_autopm_put_interface(dev->intf);
}
return retval;
+done_manage_power_error:
+ clear_bit(EVENT_DEV_OPEN, &dev->flags);
done:
usb_autopm_put_interface(dev->intf);
done_nopm:
@@ -876,9 +878,9 @@
{
struct usbnet *dev = netdev_priv(net);
- strncpy (info->driver, dev->driver_name, sizeof info->driver);
- strncpy (info->version, DRIVER_VERSION, sizeof info->version);
- strncpy (info->fw_version, dev->driver_info->description,
+ strlcpy (info->driver, dev->driver_name, sizeof info->driver);
+ strlcpy (info->version, DRIVER_VERSION, sizeof info->version);
+ strlcpy (info->fw_version, dev->driver_info->description,
sizeof info->fw_version);
usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
}
@@ -1202,6 +1204,21 @@
}
EXPORT_SYMBOL_GPL(usbnet_start_xmit);
+static void rx_alloc_submit(struct usbnet *dev, gfp_t flags)
+{
+ struct urb *urb;
+ int i;
+
+ /* don't refill the queue all at once */
+ for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) {
+ urb = usb_alloc_urb(0, flags);
+ if (urb != NULL) {
+ if (rx_submit(dev, urb, flags) == -ENOLINK)
+ return;
+ }
+ }
+}
+
/*-------------------------------------------------------------------------*/
// tasklet (work deferred from completions, in_irq) or timer
@@ -1241,26 +1258,14 @@
!timer_pending (&dev->delay) &&
!test_bit (EVENT_RX_HALT, &dev->flags)) {
int temp = dev->rxq.qlen;
- int qlen = RX_QLEN (dev);
- if (temp < qlen) {
- struct urb *urb;
- int i;
-
- // don't refill the queue all at once
- for (i = 0; i < 10 && dev->rxq.qlen < qlen; i++) {
- urb = usb_alloc_urb (0, GFP_ATOMIC);
- if (urb != NULL) {
- if (rx_submit (dev, urb, GFP_ATOMIC) ==
- -ENOLINK)
- return;
- }
- }
+ if (temp < RX_QLEN(dev)) {
+ rx_alloc_submit(dev, GFP_ATOMIC);
if (temp != dev->rxq.qlen)
netif_dbg(dev, link, dev->net,
"rxqlen %d --> %d\n",
temp, dev->rxq.qlen);
- if (dev->rxq.qlen < qlen)
+ if (dev->rxq.qlen < RX_QLEN(dev))
tasklet_schedule (&dev->bh);
}
if (dev->txq.qlen < TX_QLEN (dev))
@@ -1513,6 +1518,7 @@
spin_lock_irq(&dev->txq.lock);
/* don't autosuspend while transmitting */
if (dev->txq.qlen && PMSG_IS_AUTO(message)) {
+ dev->suspend_count--;
spin_unlock_irq(&dev->txq.lock);
return -EBUSY;
} else {
@@ -1569,6 +1575,13 @@
spin_unlock_irq(&dev->txq.lock);
if (test_bit(EVENT_DEV_OPEN, &dev->flags)) {
+ /* handle remote wakeup ASAP */
+ if (!dev->wait &&
+ netif_device_present(dev->net) &&
+ !timer_pending(&dev->delay) &&
+ !test_bit(EVENT_RX_HALT, &dev->flags))
+ rx_alloc_submit(dev, GFP_KERNEL);
+
if (!(dev->txq.qlen >= TX_QLEN(dev)))
netif_tx_wake_all_queues(dev->net);
tasklet_schedule (&dev->bh);
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 5214b1e..f18149a 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -42,7 +42,8 @@
#define VIRTNET_DRIVER_VERSION "1.0.0"
struct virtnet_stats {
- struct u64_stats_sync syncp;
+ struct u64_stats_sync tx_syncp;
+ struct u64_stats_sync rx_syncp;
u64 tx_bytes;
u64 tx_packets;
@@ -300,10 +301,10 @@
hdr = skb_vnet_hdr(skb);
- u64_stats_update_begin(&stats->syncp);
+ u64_stats_update_begin(&stats->rx_syncp);
stats->rx_bytes += skb->len;
stats->rx_packets++;
- u64_stats_update_end(&stats->syncp);
+ u64_stats_update_end(&stats->rx_syncp);
if (hdr->hdr.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) {
pr_debug("Needs csum!\n");
@@ -565,10 +566,10 @@
while ((skb = virtqueue_get_buf(vi->svq, &len)) != NULL) {
pr_debug("Sent skb %p\n", skb);
- u64_stats_update_begin(&stats->syncp);
+ u64_stats_update_begin(&stats->tx_syncp);
stats->tx_bytes += skb->len;
stats->tx_packets++;
- u64_stats_update_end(&stats->syncp);
+ u64_stats_update_end(&stats->tx_syncp);
tot_sgs += skb_vnet_hdr(skb)->num_sg;
dev_kfree_skb_any(skb);
@@ -703,12 +704,16 @@
u64 tpackets, tbytes, rpackets, rbytes;
do {
- start = u64_stats_fetch_begin(&stats->syncp);
+ start = u64_stats_fetch_begin(&stats->tx_syncp);
tpackets = stats->tx_packets;
tbytes = stats->tx_bytes;
+ } while (u64_stats_fetch_retry(&stats->tx_syncp, start));
+
+ do {
+ start = u64_stats_fetch_begin(&stats->rx_syncp);
rpackets = stats->rx_packets;
rbytes = stats->rx_bytes;
- } while (u64_stats_fetch_retry(&stats->syncp, start));
+ } while (u64_stats_fetch_retry(&stats->rx_syncp, start));
tot->rx_packets += rpackets;
tot->tx_packets += tpackets;
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 520a4b2..a747c63 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -7233,8 +7233,8 @@
}
} else {
dwrq->flags = 1; /* Should be define'd */
- memcpy(extra + sizeof(struct sockaddr)*i,
- &qual, sizeof(struct iw_quality)*i);
+ memcpy(extra + sizeof(struct sockaddr) * i, qual,
+ sizeof(struct iw_quality) * i);
}
dwrq->length = i;
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index c54b7d37..420d69b 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -143,6 +143,7 @@
u32 keymax;
DECLARE_BITMAP(keymap, ATH_KEYMAX);
DECLARE_BITMAP(tkip_keymap, ATH_KEYMAX);
+ DECLARE_BITMAP(ccmp_keymap, ATH_KEYMAX);
enum ath_crypt_caps crypt_caps;
unsigned int clockrate;
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index fbaa309..44ad6fe 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1045,11 +1045,11 @@
ath5k_txbuf_free_skb(ah, bf);
- spin_lock_bh(&ah->txbuflock);
+ spin_lock(&ah->txbuflock);
list_move_tail(&bf->list, &ah->txbuf);
ah->txbuf_len++;
txq->txq_len--;
- spin_unlock_bh(&ah->txbuflock);
+ spin_unlock(&ah->txbuflock);
}
txq->link = NULL;
txq->txq_poll_mark = false;
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index a277cf6..4866550 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -214,6 +214,7 @@
enum ath9k_key_type keytype;
u8 keyix;
u8 retries;
+ u8 rtscts_rate;
};
struct ath_buf_state {
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 2b8f61c..abbd6ef 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1496,6 +1496,7 @@
priv->num_sta_assoc_vif++ : priv->num_sta_assoc_vif--;
if (priv->ah->opmode == NL80211_IFTYPE_STATION) {
+ ath9k_htc_choose_set_bssid(priv);
if (bss_conf->assoc && (priv->num_sta_assoc_vif == 1))
ath9k_htc_start_ani(priv);
else if (priv->num_sta_assoc_vif == 0)
@@ -1503,13 +1504,11 @@
}
}
- if (changed & BSS_CHANGED_BSSID) {
+ if (changed & BSS_CHANGED_IBSS) {
if (priv->ah->opmode == NL80211_IFTYPE_ADHOC) {
common->curaid = bss_conf->aid;
memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
ath9k_htc_set_bssid(priv);
- } else if (priv->ah->opmode == NL80211_IFTYPE_STATION) {
- ath9k_htc_choose_set_bssid(priv);
}
}
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 7db1890..995ca8e 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -622,7 +622,7 @@
if (NR_CPUS > 1 && ah->config.serialize_regmode == SER_REG_MODE_AUTO) {
if (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCI ||
- ((AR_SREV_9160(ah) || AR_SREV_9280(ah)) &&
+ ((AR_SREV_9160(ah) || AR_SREV_9280(ah) || AR_SREV_9287(ah)) &&
!ah->is_pciexpress)) {
ah->config.serialize_regmode =
SER_REG_MODE_ON;
@@ -784,13 +784,25 @@
u32 ar9003_get_pll_sqsum_dvc(struct ath_hw *ah)
{
+ struct ath_common *common = ath9k_hw_common(ah);
+ int i = 0;
+
REG_CLR_BIT(ah, PLL3, PLL3_DO_MEAS_MASK);
udelay(100);
REG_SET_BIT(ah, PLL3, PLL3_DO_MEAS_MASK);
- while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0)
+ while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0) {
+
udelay(100);
+ if (WARN_ON_ONCE(i >= 100)) {
+ ath_err(common, "PLL4 meaurement not done\n");
+ break;
+ }
+
+ i++;
+ }
+
return (REG_READ(ah, PLL3) & SQSUM_DVC_MASK) >> 3;
}
EXPORT_SYMBOL(ar9003_get_pll_sqsum_dvc);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 4de4473..dac1a27 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -971,6 +971,15 @@
hw_pll_work.work);
u32 pll_sqsum;
+ /*
+ * ensure that the PLL WAR is executed only
+ * after the STA is associated (or) if the
+ * beaconing had started in interfaces that
+ * uses beacons.
+ */
+ if (!(sc->sc_flags & SC_OP_BEACONS))
+ return;
+
if (AR_SREV_9485(sc->sc_ah)) {
ath9k_ps_wakeup(sc);
@@ -1443,15 +1452,6 @@
}
}
- if ((ah->opmode == NL80211_IFTYPE_ADHOC) ||
- ((vif->type == NL80211_IFTYPE_ADHOC) &&
- sc->nvifs > 0)) {
- ath_err(common, "Cannot create ADHOC interface when other"
- " interfaces already exist.\n");
- ret = -EINVAL;
- goto out;
- }
-
ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type);
sc->nvifs++;
@@ -1476,15 +1476,6 @@
mutex_lock(&sc->mutex);
ath9k_ps_wakeup(sc);
- /* See if new interface type is valid. */
- if ((new_type == NL80211_IFTYPE_ADHOC) &&
- (sc->nvifs > 1)) {
- ath_err(common, "When using ADHOC, it must be the only"
- " interface.\n");
- ret = -EINVAL;
- goto out;
- }
-
if (ath9k_uses_beacons(new_type) &&
!ath9k_uses_beacons(vif->type)) {
if (sc->nbcnvifs >= ATH_BCBUF) {
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index e1fcc68..0735aeb 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -695,9 +695,9 @@
__skb_unlink(skb, &rx_edma->rx_fifo);
list_add_tail(&bf->list, &sc->rx.rxbuf);
ath_rx_edma_buf_link(sc, qtype);
- } else {
- bf = NULL;
}
+
+ bf = NULL;
}
*dest = bf;
@@ -822,7 +822,8 @@
* descriptor does contain a valid key index. This has been observed
* mostly with CCMP encryption.
*/
- if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID)
+ if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID ||
+ !test_bit(rx_stats->rs_keyix, common->ccmp_keymap))
rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
if (!rx_stats->rs_datalen) {
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index d59dd01..4d57139 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -938,6 +938,7 @@
struct ieee80211_tx_rate *rates;
const struct ieee80211_rate *rate;
struct ieee80211_hdr *hdr;
+ struct ath_frame_info *fi = get_frame_info(bf->bf_mpdu);
int i;
u8 rix = 0;
@@ -948,18 +949,7 @@
/* set dur_update_en for l-sig computation except for PS-Poll frames */
info->dur_update = !ieee80211_is_pspoll(hdr->frame_control);
-
- /*
- * We check if Short Preamble is needed for the CTS rate by
- * checking the BSS's global flag.
- * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used.
- */
- rate = ieee80211_get_rts_cts_rate(sc->hw, tx_info);
- info->rtscts_rate = rate->hw_value;
-
- if (tx_info->control.vif &&
- tx_info->control.vif->bss_conf.use_short_preamble)
- info->rtscts_rate |= rate->hw_value_short;
+ info->rtscts_rate = fi->rtscts_rate;
for (i = 0; i < 4; i++) {
bool is_40, is_sgi, is_sp;
@@ -1001,13 +991,13 @@
}
/* legacy rates */
+ rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx];
if ((tx_info->band == IEEE80211_BAND_2GHZ) &&
!(rate->flags & IEEE80211_RATE_ERP_G))
phy = WLAN_RC_PHY_CCK;
else
phy = WLAN_RC_PHY_OFDM;
- rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx];
info->rates[i].Rate = rate->hw_value;
if (rate->hw_value_short) {
if (rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
@@ -1776,10 +1766,22 @@
struct ieee80211_sta *sta = tx_info->control.sta;
struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ const struct ieee80211_rate *rate;
struct ath_frame_info *fi = get_frame_info(skb);
struct ath_node *an = NULL;
enum ath9k_key_type keytype;
+ bool short_preamble = false;
+ /*
+ * We check if Short Preamble is needed for the CTS rate by
+ * checking the BSS's global flag.
+ * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used.
+ */
+ if (tx_info->control.vif &&
+ tx_info->control.vif->bss_conf.use_short_preamble)
+ short_preamble = true;
+
+ rate = ieee80211_get_rts_cts_rate(hw, tx_info);
keytype = ath9k_cmn_get_hw_crypto_keytype(skb);
if (sta)
@@ -1794,6 +1796,9 @@
fi->keyix = ATH9K_TXKEYIX_INVALID;
fi->keytype = keytype;
fi->framelen = framelen;
+ fi->rtscts_rate = rate->hw_value;
+ if (short_preamble)
+ fi->rtscts_rate |= rate->hw_value_short;
}
u8 ath_txchainmask_reduction(struct ath_softc *sc, u8 chainmask, u32 rate)
diff --git a/drivers/net/wireless/ath/key.c b/drivers/net/wireless/ath/key.c
index 0e81904..5c54aa4 100644
--- a/drivers/net/wireless/ath/key.c
+++ b/drivers/net/wireless/ath/key.c
@@ -556,6 +556,9 @@
return -EIO;
set_bit(idx, common->keymap);
+ if (key->cipher == WLAN_CIPHER_SUITE_CCMP)
+ set_bit(idx, common->ccmp_keymap);
+
if (key->cipher == WLAN_CIPHER_SUITE_TKIP) {
set_bit(idx + 64, common->keymap);
set_bit(idx, common->tkip_keymap);
@@ -582,6 +585,7 @@
return;
clear_bit(key->hw_key_idx, common->keymap);
+ clear_bit(key->hw_key_idx, common->ccmp_keymap);
if (key->cipher != WLAN_CIPHER_SUITE_TKIP)
return;
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 67c13af..c06b6cb 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -877,6 +877,10 @@
* from the mac80211 subsystem. */
u16 mac80211_initially_registered_queues;
+ /* Set this if we call ieee80211_register_hw() and check if we call
+ * ieee80211_unregister_hw(). */
+ bool hw_registred;
+
/* We can only have one operating interface (802.11 core)
* at a time. General information about this interface follows.
*/
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 5a39b22..1b988f2 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2437,6 +2437,7 @@
err = ieee80211_register_hw(wl->hw);
if (err)
goto err_one_core_detach;
+ wl->hw_registred = true;
b43_leds_register(wl->current_dev);
goto out;
@@ -3766,7 +3767,7 @@
if (prev_status >= B43_STAT_STARTED) {
err = b43_wireless_core_start(up_dev);
if (err) {
- b43err(wl, "Fatal: Coult not start device for "
+ b43err(wl, "Fatal: Could not start device for "
"selected %s-GHz band\n",
band_to_string(chan->band));
b43_wireless_core_exit(up_dev);
@@ -5299,6 +5300,7 @@
hw->queues = modparam_qos ? B43_QOS_QUEUE_NUM : 1;
wl->mac80211_initially_registered_queues = hw->queues;
+ wl->hw_registred = false;
hw->max_rates = 2;
SET_IEEE80211_DEV(hw, dev->dev);
if (is_valid_ether_addr(sprom->et1mac))
@@ -5370,12 +5372,15 @@
* as the ieee80211 unreg will destroy the workqueue. */
cancel_work_sync(&wldev->restart_work);
- /* Restore the queues count before unregistering, because firmware detect
- * might have modified it. Restoring is important, so the networking
- * stack can properly free resources. */
- wl->hw->queues = wl->mac80211_initially_registered_queues;
- b43_leds_stop(wldev);
- ieee80211_unregister_hw(wl->hw);
+ B43_WARN_ON(!wl);
+ if (wl->current_dev == wldev && wl->hw_registred) {
+ /* Restore the queues count before unregistering, because firmware detect
+ * might have modified it. Restoring is important, so the networking
+ * stack can properly free resources. */
+ wl->hw->queues = wl->mac80211_initially_registered_queues;
+ b43_leds_stop(wldev);
+ ieee80211_unregister_hw(wl->hw);
+ }
b43_one_core_detach(wldev->dev);
@@ -5446,7 +5451,7 @@
cancel_work_sync(&wldev->restart_work);
B43_WARN_ON(!wl);
- if (wl->current_dev == wldev) {
+ if (wl->current_dev == wldev && wl->hw_registred) {
/* Restore the queues count before unregistering, because firmware detect
* might have modified it. Restoring is important, so the networking
* stack can properly free resources. */
diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c
index f1f8bd0..c8baf02 100644
--- a/drivers/net/wireless/b43legacy/dma.c
+++ b/drivers/net/wireless/b43legacy/dma.c
@@ -1072,7 +1072,7 @@
meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
/* create a bounce buffer in zone_dma on mapping failure. */
if (b43legacy_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
- bounce_skb = __dev_alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA);
+ bounce_skb = alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA);
if (!bounce_skb) {
ring->current_slot = old_top_slot;
ring->used_slots = old_used_slots;
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index cd9c9bc..eae691e 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2633,7 +2633,7 @@
if (prev_status >= B43legacy_STAT_STARTED) {
err = b43legacy_wireless_core_start(up_dev);
if (err) {
- b43legacyerr(wl, "Fatal: Coult not start device for "
+ b43legacyerr(wl, "Fatal: Could not start device for "
"newly selected %s-PHY mode\n",
phymode_to_string(new_mode));
b43legacy_wireless_core_exit(up_dev);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index e2480d1..8e7e692 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -89,9 +89,9 @@
data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
- /* redirect, configure ane enable io for interrupt signal */
+ /* redirect, configure and enable io for interrupt signal */
data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
- if (sdiodev->irq_flags | IRQF_TRIGGER_HIGH)
+ if (sdiodev->irq_flags & IRQF_TRIGGER_HIGH)
data |= SDIO_SEPINT_ACT_HI;
brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 9cfae0c..95aa8e1 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -1903,14 +1903,6 @@
netif_stop_queue(priv->net_dev);
}
-/* Called by register_netdev() */
-static int ipw2100_net_init(struct net_device *dev)
-{
- struct ipw2100_priv *priv = libipw_priv(dev);
-
- return ipw2100_up(priv, 1);
-}
-
static int ipw2100_wdev_init(struct net_device *dev)
{
struct ipw2100_priv *priv = libipw_priv(dev);
@@ -6087,7 +6079,6 @@
.ndo_stop = ipw2100_close,
.ndo_start_xmit = libipw_xmit,
.ndo_change_mtu = libipw_change_mtu,
- .ndo_init = ipw2100_net_init,
.ndo_tx_timeout = ipw2100_tx_timeout,
.ndo_set_mac_address = ipw2100_set_address,
.ndo_validate_addr = eth_validate_addr,
@@ -6329,6 +6320,10 @@
printk(KERN_INFO DRV_NAME
": Detected Intel PRO/Wireless 2100 Network Connection\n");
+ err = ipw2100_up(priv, 1);
+ if (err)
+ goto fail;
+
err = ipw2100_wdev_init(dev);
if (err)
goto fail;
@@ -6338,12 +6333,7 @@
* network device we would call ipw2100_up. This introduced a race
* condition with newer hotplug configurations (network was coming
* up and making calls before the device was initialized).
- *
- * If we called ipw2100_up before we registered the device, then the
- * device name wasn't registered. So, we instead use the net_dev->init
- * member to call a function that then just turns and calls ipw2100_up.
- * net_dev->init is called after name allocation but before the
- * notifier chain is called */
+ */
err = register_netdev(dev);
if (err) {
printk(KERN_WARNING DRV_NAME
diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c
index 509301a..ff5d689 100644
--- a/drivers/net/wireless/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/iwlegacy/4965-mac.c
@@ -3405,7 +3405,7 @@
return 0;
}
- if (il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET) {
+ if (il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_INVALID) {
IL_WARN("Removing wrong key %d 0x%x\n", keyconf->keyidx,
key_flags);
spin_unlock_irqrestore(&il->sta_lock, flags);
@@ -3420,7 +3420,7 @@
memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo));
il->stations[sta_id].sta.key.key_flags =
STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID;
- il->stations[sta_id].sta.key.key_offset = WEP_INVALID_OFFSET;
+ il->stations[sta_id].sta.key.key_offset = keyconf->hw_key_idx;
il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c
index cbf2dc1..5d4807c 100644
--- a/drivers/net/wireless/iwlegacy/common.c
+++ b/drivers/net/wireless/iwlegacy/common.c
@@ -4767,14 +4767,12 @@
return;
/* monitor and check for other stuck queues */
- if (il_is_any_associated(il)) {
- for (cnt = 0; cnt < il->hw_params.max_txq_num; cnt++) {
- /* skip as we already checked the command queue */
- if (cnt == il->cmd_queue)
- continue;
- if (il_check_stuck_queue(il, cnt))
- return;
- }
+ for (cnt = 0; cnt < il->hw_params.max_txq_num; cnt++) {
+ /* skip as we already checked the command queue */
+ if (cnt == il->cmd_queue)
+ continue;
+ if (il_check_stuck_queue(il, cnt))
+ return;
}
mod_timer(&il->watchdog,
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 19f7ee8..e5e8ada 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -35,17 +35,20 @@
#define IWL6000_UCODE_API_MAX 6
#define IWL6050_UCODE_API_MAX 5
#define IWL6000G2_UCODE_API_MAX 6
+#define IWL6035_UCODE_API_MAX 6
/* Oldest version we won't warn about */
#define IWL6000_UCODE_API_OK 4
#define IWL6000G2_UCODE_API_OK 5
#define IWL6050_UCODE_API_OK 5
#define IWL6000G2B_UCODE_API_OK 6
+#define IWL6035_UCODE_API_OK 6
/* Lowest firmware API version supported */
#define IWL6000_UCODE_API_MIN 4
#define IWL6050_UCODE_API_MIN 4
-#define IWL6000G2_UCODE_API_MIN 4
+#define IWL6000G2_UCODE_API_MIN 5
+#define IWL6035_UCODE_API_MIN 6
/* EEPROM versions */
#define EEPROM_6000_TX_POWER_VERSION (4)
@@ -227,9 +230,25 @@
IWL_DEVICE_6030,
};
+#define IWL_DEVICE_6035 \
+ .fw_name_pre = IWL6030_FW_PRE, \
+ .ucode_api_max = IWL6035_UCODE_API_MAX, \
+ .ucode_api_ok = IWL6035_UCODE_API_OK, \
+ .ucode_api_min = IWL6035_UCODE_API_MIN, \
+ .device_family = IWL_DEVICE_FAMILY_6030, \
+ .max_inst_size = IWL60_RTC_INST_SIZE, \
+ .max_data_size = IWL60_RTC_DATA_SIZE, \
+ .eeprom_ver = EEPROM_6030_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION, \
+ .base_params = &iwl6000_g2_base_params, \
+ .bt_params = &iwl6000_bt_params, \
+ .need_temp_offset_calib = true, \
+ .led_mode = IWL_LED_RF_STATE, \
+ .adv_pm = true
+
const struct iwl_cfg iwl6035_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6235 AGN",
- IWL_DEVICE_6030,
+ IWL_DEVICE_6035,
.ht_params = &iwl6000_ht_params,
};
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
index aea07aa..eb6a8ea 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
@@ -1267,7 +1267,7 @@
key_flags |= STA_KEY_MULTICAST_MSK;
sta_cmd.key.key_flags = key_flags;
- sta_cmd.key.key_offset = WEP_INVALID_OFFSET;
+ sta_cmd.key.key_offset = keyconf->hw_key_idx;
sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK;
sta_cmd.mode = STA_CONTROL_MODIFY_MSK;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index e7c157e..7f97dec 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -2239,6 +2239,7 @@
return count;
}
+#ifdef CONFIG_IWLWIFI_DEBUG
static ssize_t iwl_dbgfs_log_event_read(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
@@ -2276,6 +2277,7 @@
return count;
}
+#endif
static ssize_t iwl_dbgfs_calib_disabled_read(struct file *file,
char __user *user_buf,
@@ -2345,7 +2347,9 @@
DEBUGFS_READ_WRITE_FILE_OPS(protection_mode);
DEBUGFS_READ_FILE_OPS(reply_tx_error);
DEBUGFS_WRITE_FILE_OPS(echo_test);
+#ifdef CONFIG_IWLWIFI_DEBUG
DEBUGFS_READ_WRITE_FILE_OPS(log_event);
+#endif
DEBUGFS_READ_WRITE_FILE_OPS(calib_disabled);
/*
@@ -2405,7 +2409,9 @@
DEBUGFS_ADD_FILE(rxon_flags, dir_debug, S_IWUSR);
DEBUGFS_ADD_FILE(rxon_filter_flags, dir_debug, S_IWUSR);
DEBUGFS_ADD_FILE(echo_test, dir_debug, S_IWUSR);
+#ifdef CONFIG_IWLWIFI_DEBUG
DEBUGFS_ADD_FILE(log_event, dir_debug, S_IWUSR | S_IRUSR);
+#endif
if (iwl_advanced_bt_coexist(priv))
DEBUGFS_ADD_FILE(bt_traffic, dir_debug, S_IRUSR);
diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c
index d742900..fac67a5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/iwlwifi/iwl-drv.c
@@ -861,13 +861,18 @@
/* We have our copies now, allow OS release its copies */
release_firmware(ucode_raw);
- complete(&drv->request_firmware_complete);
drv->op_mode = iwl_dvm_ops.start(drv->trans, drv->cfg, &drv->fw);
if (!drv->op_mode)
- goto out_free_fw;
+ goto out_unbind;
+ /*
+ * Complete the firmware request last so that
+ * a driver unbind (stop) doesn't run while we
+ * are doing the start() above.
+ */
+ complete(&drv->request_firmware_complete);
return;
try_again:
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 50c5891..b8e2b22 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -568,28 +568,28 @@
* iwl_get_max_txpower_avg - get the highest tx power from all chains.
* find the highest tx power from all chains for the channel
*/
-static s8 iwl_get_max_txpower_avg(const struct iwl_cfg *cfg,
+static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
int element, s8 *max_txpower_in_half_dbm)
{
s8 max_txpower_avg = 0; /* (dBm) */
/* Take the highest tx power from any valid chains */
- if ((cfg->valid_tx_ant & ANT_A) &&
+ if ((priv->hw_params.valid_tx_ant & ANT_A) &&
(enhanced_txpower[element].chain_a_max > max_txpower_avg))
max_txpower_avg = enhanced_txpower[element].chain_a_max;
- if ((cfg->valid_tx_ant & ANT_B) &&
+ if ((priv->hw_params.valid_tx_ant & ANT_B) &&
(enhanced_txpower[element].chain_b_max > max_txpower_avg))
max_txpower_avg = enhanced_txpower[element].chain_b_max;
- if ((cfg->valid_tx_ant & ANT_C) &&
+ if ((priv->hw_params.valid_tx_ant & ANT_C) &&
(enhanced_txpower[element].chain_c_max > max_txpower_avg))
max_txpower_avg = enhanced_txpower[element].chain_c_max;
- if (((cfg->valid_tx_ant == ANT_AB) |
- (cfg->valid_tx_ant == ANT_BC) |
- (cfg->valid_tx_ant == ANT_AC)) &&
+ if (((priv->hw_params.valid_tx_ant == ANT_AB) |
+ (priv->hw_params.valid_tx_ant == ANT_BC) |
+ (priv->hw_params.valid_tx_ant == ANT_AC)) &&
(enhanced_txpower[element].mimo2_max > max_txpower_avg))
max_txpower_avg = enhanced_txpower[element].mimo2_max;
- if ((cfg->valid_tx_ant == ANT_ABC) &&
+ if ((priv->hw_params.valid_tx_ant == ANT_ABC) &&
(enhanced_txpower[element].mimo3_max > max_txpower_avg))
max_txpower_avg = enhanced_txpower[element].mimo3_max;
@@ -691,7 +691,7 @@
((txp->delta_20_in_40 & 0xf0) >> 4),
(txp->delta_20_in_40 & 0x0f));
- max_txp_avg = iwl_get_max_txpower_avg(priv->cfg, txp_array, idx,
+ max_txp_avg = iwl_get_max_txpower_avg(priv, txp_array, idx,
&max_txp_avg_halfdbm);
/*
diff --git a/drivers/net/wireless/iwlwifi/iwl-mac80211.c b/drivers/net/wireless/iwlwifi/iwl-mac80211.c
index ab2f4d75..0136803 100644
--- a/drivers/net/wireless/iwlwifi/iwl-mac80211.c
+++ b/drivers/net/wireless/iwlwifi/iwl-mac80211.c
@@ -199,6 +199,7 @@
WIPHY_FLAG_DISABLE_BEACON_HINTS |
WIPHY_FLAG_IBSS_RSN;
+#ifdef CONFIG_PM_SLEEP
if (priv->fw->img[IWL_UCODE_WOWLAN].sec[0].len &&
priv->trans->ops->wowlan_suspend &&
device_can_wakeup(priv->trans->dev)) {
@@ -217,6 +218,7 @@
hw->wiphy->wowlan.pattern_max_len =
IWLAGN_WOWLAN_MAX_PATTERN_LEN;
}
+#endif
if (iwlwifi_mod_params.power_save)
hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
@@ -249,6 +251,7 @@
ret = ieee80211_register_hw(priv->hw);
if (ret) {
IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
+ iwl_leds_exit(priv);
return ret;
}
priv->mac80211_registered = 1;
@@ -793,6 +796,18 @@
switch (op) {
case ADD:
ret = iwlagn_mac_sta_add(hw, vif, sta);
+ if (ret)
+ break;
+ /*
+ * Clear the in-progress flag, the AP station entry was added
+ * but we'll initialize LQ only when we've associated (which
+ * would also clear the in-progress flag). This is necessary
+ * in case we never initialize LQ because association fails.
+ */
+ spin_lock_bh(&priv->sta_lock);
+ priv->stations[iwl_sta_id(sta)].used &=
+ ~IWL_STA_UCODE_INPROGRESS;
+ spin_unlock_bh(&priv->sta_lock);
break;
case REMOVE:
ret = iwlagn_mac_sta_remove(hw, vif, sta);
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index 3b106929..dfd5466 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -224,6 +224,7 @@
#define SCD_TXFACT (SCD_BASE + 0x10)
#define SCD_ACTIVE (SCD_BASE + 0x14)
#define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8)
+#define SCD_CHAINEXT_EN (SCD_BASE + 0x244)
#define SCD_AGGR_SEL (SCD_BASE + 0x248)
#define SCD_INTERRUPT_MASK (SCD_BASE + 0x108)
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
index ec6fb39..79c6b91 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
@@ -1058,6 +1058,11 @@
iwl_write_prph(trans, SCD_DRAM_BASE_ADDR,
trans_pcie->scd_bc_tbls.dma >> 10);
+ /* The chain extension of the SCD doesn't work well. This feature is
+ * enabled by default by the HW, so we need to disable it manually.
+ */
+ iwl_write_prph(trans, SCD_CHAINEXT_EN, 0);
+
/* Enable DMA channel */
for (chan = 0; chan < FH_TCSR_CHNL_NUM ; chan++)
iwl_write_direct32(trans, FH_TCSR_CHNL_TX_CONFIG_REG(chan),
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index fb787df..a0b7cfd 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1555,6 +1555,7 @@
hdr = (struct ieee80211_hdr *) skb->data;
mac80211_hwsim_monitor_ack(data2->hw, hdr->addr2);
}
+ txi->flags |= IEEE80211_TX_STAT_ACK;
}
ieee80211_tx_status_irqsafe(data2->hw, skb);
return 0;
@@ -1721,6 +1722,24 @@
"unregister family %i\n", ret);
}
+static const struct ieee80211_iface_limit hwsim_if_limits[] = {
+ { .max = 1, .types = BIT(NL80211_IFTYPE_ADHOC) },
+ { .max = 2048, .types = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT) |
+#ifdef CONFIG_MAC80211_MESH
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_GO) },
+};
+
+static const struct ieee80211_iface_combination hwsim_if_comb = {
+ .limits = hwsim_if_limits,
+ .n_limits = ARRAY_SIZE(hwsim_if_limits),
+ .max_interfaces = 2048,
+ .num_different_channels = 1,
+};
+
static int __init init_mac80211_hwsim(void)
{
int i, err = 0;
@@ -1782,6 +1801,9 @@
hw->wiphy->n_addresses = 2;
hw->wiphy->addresses = data->addresses;
+ hw->wiphy->iface_combinations = &hwsim_if_comb;
+ hw->wiphy->n_iface_combinations = 1;
+
if (fake_hw_scan) {
hw->wiphy->max_scan_ssids = 255;
hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c
index 9c44088..900ee12 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.c
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c
@@ -256,7 +256,8 @@
else
last_seq = priv->rx_seq[tid];
- if (last_seq >= new_node->start_win)
+ if (last_seq != MWIFIEX_DEF_11N_RX_SEQ_NUM &&
+ last_seq >= new_node->start_win)
new_node->start_win = last_seq + 1;
new_node->win_size = win_size;
@@ -596,5 +597,5 @@
spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
INIT_LIST_HEAD(&priv->rx_reorder_tbl_ptr);
- memset(priv->rx_seq, 0, sizeof(priv->rx_seq));
+ mwifiex_reset_11n_rx_seq_num(priv);
}
diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.h b/drivers/net/wireless/mwifiex/11n_rxreorder.h
index f1bffeb..6c9815a 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.h
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.h
@@ -37,6 +37,13 @@
#define ADDBA_RSP_STATUS_ACCEPT 0
+#define MWIFIEX_DEF_11N_RX_SEQ_NUM 0xffff
+
+static inline void mwifiex_reset_11n_rx_seq_num(struct mwifiex_private *priv)
+{
+ memset(priv->rx_seq, 0xff, sizeof(priv->rx_seq));
+}
+
int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *,
u16 seqNum,
u16 tid, u8 *ta,
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 8767144..5c7fd18 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -948,6 +948,20 @@
bss_cfg->ssid.ssid_len = params->ssid_len;
}
+ switch (params->hidden_ssid) {
+ case NL80211_HIDDEN_SSID_NOT_IN_USE:
+ bss_cfg->bcast_ssid_ctl = 1;
+ break;
+ case NL80211_HIDDEN_SSID_ZERO_LEN:
+ bss_cfg->bcast_ssid_ctl = 0;
+ break;
+ case NL80211_HIDDEN_SSID_ZERO_CONTENTS:
+ /* firmware doesn't support this type of hidden SSID */
+ default:
+ kfree(bss_cfg);
+ return -EINVAL;
+ }
+
if (mwifiex_set_secure_params(priv, bss_cfg, params)) {
kfree(bss_cfg);
wiphy_err(wiphy, "Failed to parse secuirty parameters!\n");
@@ -1471,7 +1485,7 @@
struct wireless_dev *wdev;
if (!adapter)
- return NULL;
+ return ERR_PTR(-EFAULT);
switch (type) {
case NL80211_IFTYPE_UNSPECIFIED:
@@ -1481,12 +1495,12 @@
if (priv->bss_mode) {
wiphy_err(wiphy,
"cannot create multiple sta/adhoc ifaces\n");
- return NULL;
+ return ERR_PTR(-EINVAL);
}
wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
if (!wdev)
- return NULL;
+ return ERR_PTR(-ENOMEM);
wdev->wiphy = wiphy;
priv->wdev = wdev;
@@ -1509,12 +1523,12 @@
if (priv->bss_mode) {
wiphy_err(wiphy, "Can't create multiple AP interfaces");
- return NULL;
+ return ERR_PTR(-EINVAL);
}
wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
if (!wdev)
- return NULL;
+ return ERR_PTR(-ENOMEM);
priv->wdev = wdev;
wdev->wiphy = wiphy;
@@ -1531,14 +1545,15 @@
break;
default:
wiphy_err(wiphy, "type not supported\n");
- return NULL;
+ return ERR_PTR(-EINVAL);
}
dev = alloc_netdev_mq(sizeof(struct mwifiex_private *), name,
ether_setup, 1);
if (!dev) {
wiphy_err(wiphy, "no memory available for netdevice\n");
- goto error;
+ priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
+ return ERR_PTR(-ENOMEM);
}
mwifiex_init_priv_params(priv, dev);
@@ -1569,7 +1584,9 @@
/* Register network device */
if (register_netdevice(dev)) {
wiphy_err(wiphy, "cannot register virtual network device\n");
- goto error;
+ free_netdev(dev);
+ priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
+ return ERR_PTR(-EFAULT);
}
sema_init(&priv->async_sem, 1);
@@ -1581,12 +1598,6 @@
mwifiex_dev_debugfs_init(priv);
#endif
return dev;
-error:
- if (dev && (dev->reg_state == NETREG_UNREGISTERED))
- free_netdev(dev);
- priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
-
- return NULL;
}
EXPORT_SYMBOL_GPL(mwifiex_add_virtual_intf);
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 9f674bb..561452a 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -122,6 +122,7 @@
#define TLV_TYPE_CHANNELBANDLIST (PROPRIETARY_TLV_BASE_ID + 42)
#define TLV_TYPE_UAP_BEACON_PERIOD (PROPRIETARY_TLV_BASE_ID + 44)
#define TLV_TYPE_UAP_DTIM_PERIOD (PROPRIETARY_TLV_BASE_ID + 45)
+#define TLV_TYPE_UAP_BCAST_SSID (PROPRIETARY_TLV_BASE_ID + 48)
#define TLV_TYPE_UAP_RTS_THRESHOLD (PROPRIETARY_TLV_BASE_ID + 51)
#define TLV_TYPE_UAP_WPA_PASSPHRASE (PROPRIETARY_TLV_BASE_ID + 60)
#define TLV_TYPE_UAP_ENCRY_PROTOCOL (PROPRIETARY_TLV_BASE_ID + 64)
@@ -1209,6 +1210,11 @@
u8 ssid[0];
} __packed;
+struct host_cmd_tlv_bcast_ssid {
+ struct host_cmd_tlv tlv;
+ u8 bcast_ctl;
+} __packed;
+
struct host_cmd_tlv_beacon_period {
struct host_cmd_tlv tlv;
__le16 period;
diff --git a/drivers/net/wireless/mwifiex/ie.c b/drivers/net/wireless/mwifiex/ie.c
index ceb82cd..383820a 100644
--- a/drivers/net/wireless/mwifiex/ie.c
+++ b/drivers/net/wireless/mwifiex/ie.c
@@ -213,6 +213,7 @@
/* save assoc resp ie index after auto-indexing */
*assoc_idx = *((u16 *)pos);
+ kfree(ap_custom_ie);
return ret;
}
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index e037747..fc8a9bf 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -978,10 +978,10 @@
dev_dbg(adapter->dev, "info: --- Rx: Event ---\n");
adapter->event_cause = *(u32 *) skb->data;
- skb_pull(skb, MWIFIEX_EVENT_HEADER_LEN);
-
if ((skb->len > 0) && (skb->len < MAX_EVENT_SIZE))
- memcpy(adapter->event_body, skb->data, skb->len);
+ memcpy(adapter->event_body,
+ skb->data + MWIFIEX_EVENT_HEADER_LEN,
+ skb->len);
/* event cause has been saved to adapter->event_cause */
adapter->event_received = true;
diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c
index 4ace5a3..11e731f 100644
--- a/drivers/net/wireless/mwifiex/sta_event.c
+++ b/drivers/net/wireless/mwifiex/sta_event.c
@@ -406,9 +406,9 @@
break;
case EVENT_UAP_STA_ASSOC:
- skb_pull(adapter->event_skb, MWIFIEX_UAP_EVENT_EXTRA_HEADER);
memset(&sinfo, 0, sizeof(sinfo));
- event = (struct mwifiex_assoc_event *)adapter->event_skb->data;
+ event = (struct mwifiex_assoc_event *)
+ (adapter->event_body + MWIFIEX_UAP_EVENT_EXTRA_HEADER);
if (le16_to_cpu(event->type) == TLV_TYPE_UAP_MGMT_FRAME) {
len = -1;
@@ -433,9 +433,8 @@
GFP_KERNEL);
break;
case EVENT_UAP_STA_DEAUTH:
- skb_pull(adapter->event_skb, MWIFIEX_UAP_EVENT_EXTRA_HEADER);
- cfg80211_del_sta(priv->netdev, adapter->event_skb->data,
- GFP_KERNEL);
+ cfg80211_del_sta(priv->netdev, adapter->event_body +
+ MWIFIEX_UAP_EVENT_EXTRA_HEADER, GFP_KERNEL);
break;
case EVENT_UAP_BSS_IDLE:
priv->media_connected = false;
diff --git a/drivers/net/wireless/mwifiex/txrx.c b/drivers/net/wireless/mwifiex/txrx.c
index e2faec4..cecb272 100644
--- a/drivers/net/wireless/mwifiex/txrx.c
+++ b/drivers/net/wireless/mwifiex/txrx.c
@@ -161,15 +161,11 @@
goto done;
for (i = 0; i < adapter->priv_num; i++) {
-
tpriv = adapter->priv[i];
- if ((GET_BSS_ROLE(tpriv) == MWIFIEX_BSS_ROLE_STA) &&
- (tpriv->media_connected)) {
- if (netif_queue_stopped(tpriv->netdev))
- mwifiex_wake_up_net_dev_queue(tpriv->netdev,
- adapter);
- }
+ if (tpriv->media_connected &&
+ netif_queue_stopped(tpriv->netdev))
+ mwifiex_wake_up_net_dev_queue(tpriv->netdev, adapter);
}
done:
dev_kfree_skb_any(skb);
diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c
index 76dfbc4..89f9a2a 100644
--- a/drivers/net/wireless/mwifiex/uap_cmd.c
+++ b/drivers/net/wireless/mwifiex/uap_cmd.c
@@ -27,6 +27,17 @@
struct cfg80211_ap_settings *params) {
int i;
+ if (!params->privacy) {
+ bss_config->protocol = PROTOCOL_NO_SECURITY;
+ bss_config->key_mgmt = KEY_MGMT_NONE;
+ bss_config->wpa_cfg.length = 0;
+ priv->sec_info.wep_enabled = 0;
+ priv->sec_info.wpa_enabled = 0;
+ priv->sec_info.wpa2_enabled = 0;
+
+ return 0;
+ }
+
switch (params->auth_type) {
case NL80211_AUTHTYPE_OPEN_SYSTEM:
bss_config->auth_mode = WLAN_AUTH_OPEN;
@@ -132,6 +143,7 @@
struct host_cmd_tlv_dtim_period *dtim_period;
struct host_cmd_tlv_beacon_period *beacon_period;
struct host_cmd_tlv_ssid *ssid;
+ struct host_cmd_tlv_bcast_ssid *bcast_ssid;
struct host_cmd_tlv_channel_band *chan_band;
struct host_cmd_tlv_frag_threshold *frag_threshold;
struct host_cmd_tlv_rts_threshold *rts_threshold;
@@ -153,6 +165,14 @@
cmd_size += sizeof(struct host_cmd_tlv) +
bss_cfg->ssid.ssid_len;
tlv += sizeof(struct host_cmd_tlv) + bss_cfg->ssid.ssid_len;
+
+ bcast_ssid = (struct host_cmd_tlv_bcast_ssid *)tlv;
+ bcast_ssid->tlv.type = cpu_to_le16(TLV_TYPE_UAP_BCAST_SSID);
+ bcast_ssid->tlv.len =
+ cpu_to_le16(sizeof(bcast_ssid->bcast_ctl));
+ bcast_ssid->bcast_ctl = bss_cfg->bcast_ssid_ctl;
+ cmd_size += sizeof(struct host_cmd_tlv_bcast_ssid);
+ tlv += sizeof(struct host_cmd_tlv_bcast_ssid);
}
if (bss_cfg->channel && bss_cfg->channel <= MAX_CHANNEL_BAND_BG) {
chan_band = (struct host_cmd_tlv_channel_band *)tlv;
@@ -416,6 +436,7 @@
if (!bss_cfg)
return -ENOMEM;
+ mwifiex_set_sys_config_invalid_data(bss_cfg);
bss_cfg->band_cfg = BAND_CONFIG_MANUAL;
bss_cfg->channel = channel;
diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c
index 49ebf20..22a59165 100644
--- a/drivers/net/wireless/mwifiex/usb.c
+++ b/drivers/net/wireless/mwifiex/usb.c
@@ -49,6 +49,7 @@
struct device *dev = adapter->dev;
u32 recv_type;
__le32 tmp;
+ int ret;
if (adapter->hs_activated)
mwifiex_process_hs_config(adapter);
@@ -69,16 +70,19 @@
case MWIFIEX_USB_TYPE_CMD:
if (skb->len > MWIFIEX_SIZE_OF_CMD_BUFFER) {
dev_err(dev, "CMD: skb->len too large\n");
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
} else if (!adapter->curr_cmd) {
dev_dbg(dev, "CMD: no curr_cmd\n");
if (adapter->ps_state == PS_STATE_SLEEP_CFM) {
mwifiex_process_sleep_confirm_resp(
adapter, skb->data,
skb->len);
- return 0;
+ ret = 0;
+ goto exit_restore_skb;
}
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
}
adapter->curr_cmd->resp_skb = skb;
@@ -87,20 +91,22 @@
case MWIFIEX_USB_TYPE_EVENT:
if (skb->len < sizeof(u32)) {
dev_err(dev, "EVENT: skb->len too small\n");
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
}
skb_copy_from_linear_data(skb, &tmp, sizeof(u32));
adapter->event_cause = le32_to_cpu(tmp);
- skb_pull(skb, sizeof(u32));
dev_dbg(dev, "event_cause %#x\n", adapter->event_cause);
if (skb->len > MAX_EVENT_SIZE) {
dev_err(dev, "EVENT: event body too large\n");
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
}
- skb_copy_from_linear_data(skb, adapter->event_body,
- skb->len);
+ memcpy(adapter->event_body, skb->data +
+ MWIFIEX_EVENT_HEADER_LEN, skb->len);
+
adapter->event_received = true;
adapter->event_skb = skb;
break;
@@ -124,6 +130,12 @@
}
return -EINPROGRESS;
+
+exit_restore_skb:
+ /* The buffer will be reused for further cmds/events */
+ skb_push(skb, INTF_HEADER_LEN);
+
+ return ret;
}
static void mwifiex_usb_rx_complete(struct urb *urb)
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index f3fc655..3fa4d41 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -404,6 +404,8 @@
priv->add_ba_param.tx_win_size = MWIFIEX_AMPDU_DEF_TXWINSIZE;
priv->add_ba_param.rx_win_size = MWIFIEX_AMPDU_DEF_RXWINSIZE;
+ mwifiex_reset_11n_rx_seq_num(priv);
+
atomic_set(&priv->wmm.tx_pkts_queued, 0);
atomic_set(&priv->wmm.highest_queued_prio, HIGH_PRIO_TID);
}
@@ -1221,6 +1223,7 @@
if (!ptr->is_11n_enabled ||
mwifiex_is_ba_stream_setup(priv, ptr, tid) ||
+ priv->wps.session_enable ||
((priv->sec_info.wpa_enabled ||
priv->sec_info.wpa2_enabled) &&
!priv->wpa_is_gtk_set)) {
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 2e9e6af..dfcd02a 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -2110,7 +2110,7 @@
while (check_bssid_list_item(bssid, bssid_len, buf, len)) {
if (rndis_bss_info_update(usbdev, bssid) && match_bssid &&
matched) {
- if (!ether_addr_equal(bssid->mac, match_bssid))
+ if (ether_addr_equal(bssid->mac, match_bssid))
*matched = true;
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index ca36ccc..8f75402 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -396,8 +396,7 @@
* for hardware which doesn't support hardware
* sequence counting.
*/
- spinlock_t seqlock;
- u16 seqno;
+ atomic_t seqno;
};
static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index b49773e..dd24b26 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -277,7 +277,6 @@
else
rt2x00dev->intf_sta_count++;
- spin_lock_init(&intf->seqlock);
mutex_init(&intf->beacon_skb_mutex);
intf->beacon = entry;
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 4c662ec..2fd8301 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -207,6 +207,7 @@
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
+ u16 seqno;
if (!(tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ))
return;
@@ -238,15 +239,13 @@
* sequence counting per-frame, since those will override the
* sequence counter given by mac80211.
*/
- spin_lock(&intf->seqlock);
-
if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
- intf->seqno += 0x10;
+ seqno = atomic_add_return(0x10, &intf->seqno);
+ else
+ seqno = atomic_read(&intf->seqno);
+
hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
- hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
-
- spin_unlock(&intf->seqlock);
-
+ hdr->seq_ctrl |= cpu_to_le16(seqno);
}
static void rt2x00queue_create_tx_descriptor_plcp(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index d357d1e..74ecc33 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -436,8 +436,8 @@
case QID_RX:
if (!rt2x00queue_full(queue))
rt2x00queue_for_each_entry(queue,
- Q_INDEX_DONE,
Q_INDEX,
+ Q_INDEX_DONE,
NULL,
rt2x00usb_kick_rx_entry);
break;
diff --git a/drivers/net/wireless/rtl818x/rtl8187/leds.c b/drivers/net/wireless/rtl818x/rtl8187/leds.c
index 2e0de2f..c2d5b49 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/leds.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/leds.c
@@ -117,7 +117,7 @@
radio_on = true;
} else if (radio_on) {
radio_on = false;
- cancel_delayed_work_sync(&priv->led_on);
+ cancel_delayed_work(&priv->led_on);
ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
}
} else if (radio_on) {
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index d228358..9970c2b 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -301,9 +301,11 @@
{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
{RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
+ {RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
{RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
{RTL_USB_DEVICE(0x0df6, 0x005c, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
+ {RTL_USB_DEVICE(0x4856, 0x0091, rtl92cu_hal_cfg)}, /*NetweeN - Feixun*/
/* HP - Lite-On ,8188CUS Slim Combo */
{RTL_USB_DEVICE(0x103c, 0x1629, rtl92cu_hal_cfg)},
{RTL_USB_DEVICE(0x13d3, 0x3357, rtl92cu_hal_cfg)}, /* AzureWave */
@@ -346,6 +348,7 @@
{RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/
{RTL_USB_DEVICE(0x0846, 0x9021, rtl92cu_hal_cfg)}, /*Netgear-Sercomm*/
{RTL_USB_DEVICE(0x0b05, 0x17ab, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
+ {RTL_USB_DEVICE(0x0bda, 0x8186, rtl92cu_hal_cfg)}, /*Realtek 92CE-VAU*/
{RTL_USB_DEVICE(0x0df6, 0x0061, rtl92cu_hal_cfg)}, /*Sitecom-Edimax*/
{RTL_USB_DEVICE(0x0e66, 0x0019, rtl92cu_hal_cfg)}, /*Hawking-Edimax*/
{RTL_USB_DEVICE(0x2001, 0x3307, rtl92cu_hal_cfg)}, /*D-Link-Cameo*/
diff --git a/drivers/net/wireless/ti/wl1251/acx.c b/drivers/net/wireless/ti/wl1251/acx.c
index ad87a1a..db6430c 100644
--- a/drivers/net/wireless/ti/wl1251/acx.c
+++ b/drivers/net/wireless/ti/wl1251/acx.c
@@ -869,7 +869,7 @@
}
*mactime = tsf_info->current_tsf_lsb |
- (tsf_info->current_tsf_msb << 31);
+ ((u64)tsf_info->current_tsf_msb << 32);
out:
kfree(tsf_info);
diff --git a/drivers/net/wireless/ti/wl1251/event.c b/drivers/net/wireless/ti/wl1251/event.c
index 9f15cca..5ec50a4 100644
--- a/drivers/net/wireless/ti/wl1251/event.c
+++ b/drivers/net/wireless/ti/wl1251/event.c
@@ -76,8 +76,7 @@
}
}
- if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID &&
- wl->station_mode != STATION_ACTIVE_MODE) {
+ if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID) {
wl1251_debug(DEBUG_EVENT, "SYNCHRONIZATION_TIMEOUT_EVENT");
/* indicate to the stack, that beacons have been lost */
diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
index 87f6305..567660c 100644
--- a/drivers/net/wireless/ti/wl1251/spi.c
+++ b/drivers/net/wireless/ti/wl1251/spi.c
@@ -73,6 +73,8 @@
spi_sync(wl_to_spi(wl), &m);
wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
+
+ kfree(cmd);
}
static void wl1251_spi_wake(struct wl1251 *wl)
@@ -127,6 +129,8 @@
spi_sync(wl_to_spi(wl), &m);
wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
+
+ kfree(cmd);
}
static void wl1251_spi_reset_wake(struct wl1251 *wl)
diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig
index 54156b0..d7b907e 100644
--- a/drivers/net/wireless/ti/wlcore/Kconfig
+++ b/drivers/net/wireless/ti/wlcore/Kconfig
@@ -1,7 +1,6 @@
config WLCORE
tristate "TI wlcore support"
depends on WL_TI && GENERIC_HARDIRQS && MAC80211
- depends on INET
select FW_LOADER
---help---
This module contains the main code for TI WLAN chips. It abstracts
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 2027afe..3089990 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1935,14 +1935,14 @@
dev_dbg(&dev->dev, "%s\n", dev->nodename);
- unregister_netdev(info->netdev);
-
xennet_disconnect_backend(info);
- del_timer_sync(&info->rx_refill_timer);
-
xennet_sysfs_delif(info->netdev);
+ unregister_netdev(info->netdev);
+
+ del_timer_sync(&info->rx_refill_timer);
+
free_percpu(info->stats);
free_netdev(info->netdev);
diff --git a/drivers/of/base.c b/drivers/of/base.c
index d9bfd49..a14f109 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1051,7 +1051,8 @@
}
/*
- * prom_update_property - Update a property in a node.
+ * prom_update_property - Update a property in a node, if the property does
+ * not exist, add it.
*
* Note that we don't actually remove it, since we have given out
* who-knows-how-many pointers to the data using get-property.
@@ -1059,13 +1060,19 @@
* and add the new property to the property list
*/
int prom_update_property(struct device_node *np,
- struct property *newprop,
- struct property *oldprop)
+ struct property *newprop)
{
- struct property **next;
+ struct property **next, *oldprop;
unsigned long flags;
int found = 0;
+ if (!newprop->name)
+ return -EINVAL;
+
+ oldprop = of_find_property(np, newprop->name, NULL);
+ if (!oldprop)
+ return prom_add_property(np, newprop);
+
write_lock_irqsave(&devtree_lock, flags);
next = &np->properties;
while (*next) {
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 343ad29..e44f8c2 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -317,10 +317,9 @@
for(; lookup->compatible != NULL; lookup++) {
if (!of_device_is_compatible(np, lookup->compatible))
continue;
- if (of_address_to_resource(np, 0, &res))
- continue;
- if (res.start != lookup->phys_addr)
- continue;
+ if (!of_address_to_resource(np, 0, &res))
+ if (res.start != lookup->phys_addr)
+ continue;
pr_debug("%s: devname=%s\n", np->full_name, lookup->name);
return lookup;
}
@@ -462,4 +461,5 @@
of_node_put(root);
return rc;
}
+EXPORT_SYMBOL_GPL(of_platform_populate);
#endif /* CONFIG_OF_ADDRESS */
diff --git a/drivers/oprofile/oprofile_perf.c b/drivers/oprofile/oprofile_perf.c
index da14432..f3cfa0b 100644
--- a/drivers/oprofile/oprofile_perf.c
+++ b/drivers/oprofile/oprofile_perf.c
@@ -1,5 +1,6 @@
/*
* Copyright 2010 ARM Ltd.
+ * Copyright 2012 Advanced Micro Devices, Inc., Robert Richter
*
* Perf-events backend for OProfile.
*/
@@ -25,7 +26,7 @@
static DEFINE_MUTEX(oprofile_perf_mutex);
static struct op_counter_config *counter_config;
-static struct perf_event **perf_events[nr_cpumask_bits];
+static DEFINE_PER_CPU(struct perf_event **, perf_events);
static int num_counters;
/*
@@ -38,7 +39,7 @@
u32 cpu = smp_processor_id();
for (id = 0; id < num_counters; ++id)
- if (perf_events[cpu][id] == event)
+ if (per_cpu(perf_events, cpu)[id] == event)
break;
if (id != num_counters)
@@ -74,7 +75,7 @@
{
struct perf_event *pevent;
- if (!counter_config[event].enabled || perf_events[cpu][event])
+ if (!counter_config[event].enabled || per_cpu(perf_events, cpu)[event])
return 0;
pevent = perf_event_create_kernel_counter(&counter_config[event].attr,
@@ -91,18 +92,18 @@
return -EBUSY;
}
- perf_events[cpu][event] = pevent;
+ per_cpu(perf_events, cpu)[event] = pevent;
return 0;
}
static void op_destroy_counter(int cpu, int event)
{
- struct perf_event *pevent = perf_events[cpu][event];
+ struct perf_event *pevent = per_cpu(perf_events, cpu)[event];
if (pevent) {
perf_event_release_kernel(pevent);
- perf_events[cpu][event] = NULL;
+ per_cpu(perf_events, cpu)[event] = NULL;
}
}
@@ -257,12 +258,12 @@
for_each_possible_cpu(cpu) {
for (id = 0; id < num_counters; ++id) {
- event = perf_events[cpu][id];
+ event = per_cpu(perf_events, cpu)[id];
if (event)
perf_event_release_kernel(event);
}
- kfree(perf_events[cpu]);
+ kfree(per_cpu(perf_events, cpu));
}
kfree(counter_config);
@@ -277,8 +278,6 @@
if (ret)
return ret;
- memset(&perf_events, 0, sizeof(perf_events));
-
num_counters = perf_num_counters();
if (num_counters <= 0) {
pr_info("oprofile: no performance counters\n");
@@ -298,9 +297,9 @@
}
for_each_possible_cpu(cpu) {
- perf_events[cpu] = kcalloc(num_counters,
+ per_cpu(perf_events, cpu) = kcalloc(num_counters,
sizeof(struct perf_event *), GFP_KERNEL);
- if (!perf_events[cpu]) {
+ if (!per_cpu(perf_events, cpu)) {
pr_info("oprofile: failed to allocate %d perf events "
"for cpu %d\n", num_counters, cpu);
ret = -ENOMEM;
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index bf0cee6..099f46c 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -748,6 +748,18 @@
pci_pm_set_unknown_state(pci_dev);
+ /*
+ * Some BIOSes from ASUS have a bug: If a USB EHCI host controller's
+ * PCI COMMAND register isn't 0, the BIOS assumes that the controller
+ * hasn't been quiesced and tries to turn it off. If the controller
+ * is already in D3, this can hang or cause memory corruption.
+ *
+ * Since the value of the COMMAND register doesn't matter once the
+ * device has been suspended, we can safely set it to 0 here.
+ */
+ if (pci_dev->class == PCI_CLASS_SERIAL_USB_EHCI)
+ pci_write_config_word(pci_dev, PCI_COMMAND, 0);
+
return 0;
}
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index c3b331b..0cc053a 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -61,7 +61,7 @@
list_for_each_entry(_maps_node_, &pinctrl_maps, node) \
for (_i_ = 0, _map_ = &_maps_node_->maps[_i_]; \
_i_ < _maps_node_->num_maps; \
- i++, _map_ = &_maps_node_->maps[_i_])
+ _i_++, _map_ = &_maps_node_->maps[_i_])
/**
* pinctrl_provide_dummies() - indicate if pinctrl provides dummy state support
diff --git a/drivers/pinctrl/pinctrl-imx.c b/drivers/pinctrl/pinctrl-imx.c
index f6e7c67..90c837f 100644
--- a/drivers/pinctrl/pinctrl-imx.c
+++ b/drivers/pinctrl/pinctrl-imx.c
@@ -27,16 +27,16 @@
#include "core.h"
#include "pinctrl-imx.h"
-#define IMX_PMX_DUMP(info, p, m, c, n) \
-{ \
- int i, j; \
- printk("Format: Pin Mux Config\n"); \
- for (i = 0; i < n; i++) { \
- j = p[i]; \
- printk("%s %d 0x%lx\n", \
- info->pins[j].name, \
- m[i], c[i]); \
- } \
+#define IMX_PMX_DUMP(info, p, m, c, n) \
+{ \
+ int i, j; \
+ printk(KERN_DEBUG "Format: Pin Mux Config\n"); \
+ for (i = 0; i < n; i++) { \
+ j = p[i]; \
+ printk(KERN_DEBUG "%s %d 0x%lx\n", \
+ info->pins[j].name, \
+ m[i], c[i]); \
+ } \
}
/* The bits in CONFIG cell defined in binding doc*/
@@ -173,8 +173,10 @@
/* create mux map */
parent = of_get_parent(np);
- if (!parent)
+ if (!parent) {
+ kfree(new_map);
return -EINVAL;
+ }
new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
new_map[0].data.mux.function = parent->name;
new_map[0].data.mux.group = np->name;
@@ -193,7 +195,7 @@
}
dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n",
- new_map->data.mux.function, new_map->data.mux.group, map_num);
+ (*map)->data.mux.function, (*map)->data.mux.group, map_num);
return 0;
}
@@ -201,10 +203,7 @@
static void imx_dt_free_map(struct pinctrl_dev *pctldev,
struct pinctrl_map *map, unsigned num_maps)
{
- int i;
-
- for (i = 0; i < num_maps; i++)
- kfree(map);
+ kfree(map);
}
static struct pinctrl_ops imx_pctrl_ops = {
@@ -478,6 +477,7 @@
#ifdef DEBUG
IMX_PMX_DUMP(info, grp->pins, grp->mux_mode, grp->configs, grp->npins);
#endif
+
return 0;
}
diff --git a/drivers/pinctrl/pinctrl-imx6q.c b/drivers/pinctrl/pinctrl-imx6q.c
index 7737d4d..e9bf71f 100644
--- a/drivers/pinctrl/pinctrl-imx6q.c
+++ b/drivers/pinctrl/pinctrl-imx6q.c
@@ -1950,6 +1950,8 @@
IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 5, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__GPIO_1_12 */
IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 6, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__SJC_DONE */
IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 7, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 */
+ IMX_PIN_REG(MX6Q_PAD_ENET_RX_ER, 0x04EC, 0x01D8, 0, 0x0000, 0), /* MX6Q_PAD_ENET_RX_ER__ANATOP_USBOTG_ID */
+ IMX_PIN_REG(MX6Q_PAD_GPIO_1, 0x05F4, 0x0224, 3, 0x0000, 0), /* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */
};
/* Pad names for the pinmux subsystem */
diff --git a/drivers/pinctrl/pinctrl-mxs.c b/drivers/pinctrl/pinctrl-mxs.c
index 556e45a..4ba4636 100644
--- a/drivers/pinctrl/pinctrl-mxs.c
+++ b/drivers/pinctrl/pinctrl-mxs.c
@@ -107,8 +107,10 @@
/* Compose group name */
group = kzalloc(length, GFP_KERNEL);
- if (!group)
- return -ENOMEM;
+ if (!group) {
+ ret = -ENOMEM;
+ goto free;
+ }
snprintf(group, length, "%s.%d", np->name, reg);
new_map[i].data.mux.group = group;
i++;
@@ -118,7 +120,7 @@
pconfig = kmemdup(&config, sizeof(config), GFP_KERNEL);
if (!pconfig) {
ret = -ENOMEM;
- goto free;
+ goto free_group;
}
new_map[i].type = PIN_MAP_TYPE_CONFIGS_GROUP;
@@ -133,6 +135,9 @@
return 0;
+free_group:
+ if (!purecfg)
+ kfree(group);
free:
kfree(new_map);
return ret;
@@ -511,6 +516,7 @@
return 0;
err:
+ platform_set_drvdata(pdev, NULL);
iounmap(d->base);
return ret;
}
@@ -520,6 +526,7 @@
{
struct mxs_pinctrl_data *d = platform_get_drvdata(pdev);
+ platform_set_drvdata(pdev, NULL);
pinctrl_unregister(d->pctl);
iounmap(d->base);
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index b26395d..dd9e6f2 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -673,7 +673,7 @@
* wakeup is anyhow controlled by the RIMSC and FIMSC registers.
*/
if (nmk_chip->sleepmode && on) {
- __nmk_gpio_set_slpm(nmk_chip, gpio % nmk_chip->chip.base,
+ __nmk_gpio_set_slpm(nmk_chip, gpio % NMK_GPIO_PER_CHIP,
NMK_GPIO_SLPM_WAKEUP_ENABLE);
}
@@ -1198,7 +1198,7 @@
if (!pdata)
return -ENOMEM;
- if (of_get_property(np, "supports-sleepmode", NULL))
+ if (of_get_property(np, "st,supports-sleepmode", NULL))
pdata->supports_sleepmode = true;
if (of_property_read_u32(np, "gpio-bank", &dev->id)) {
@@ -1246,6 +1246,7 @@
ret = PTR_ERR(clk);
goto out_unmap;
}
+ clk_prepare(clk);
nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
if (!nmk_chip) {
@@ -1437,7 +1438,27 @@
dev_dbg(npct->dev, "enable group %s, %u pins\n", g->name, g->npins);
- /* Handle this special glitch on altfunction C */
+ /*
+ * If we're setting altfunc C by setting both AFSLA and AFSLB to 1,
+ * we may pass through an undesired state. In this case we take
+ * some extra care.
+ *
+ * Safe sequence used to switch IOs between GPIO and Alternate-C mode:
+ * - Save SLPM registers (since we have a shadow register in the
+ * nmk_chip we're using that as backup)
+ * - Set SLPM=0 for the IOs you want to switch and others to 1
+ * - Configure the GPIO registers for the IOs that are being switched
+ * - Set IOFORCE=1
+ * - Modify the AFLSA/B registers for the IOs that are being switched
+ * - Set IOFORCE=0
+ * - Restore SLPM registers
+ * - Any spurious wake up event during switch sequence to be ignored
+ * and cleared
+ *
+ * We REALLY need to save ALL slpm registers, because the external
+ * IOFORCE will switch *all* ports to their sleepmode setting to as
+ * to avoid glitches. (Not just one port!)
+ */
glitch = (g->altsetting == NMK_GPIO_ALT_C);
if (glitch) {
diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c
index ba15b1a..2aae8a8 100644
--- a/drivers/pinctrl/pinctrl-sirf.c
+++ b/drivers/pinctrl/pinctrl-sirf.c
@@ -8,24 +8,61 @@
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/err.h>
+#include <linux/irqdomain.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#define DRIVER_NAME "pinmux-sirf"
#define SIRFSOC_NUM_PADS 622
-#define SIRFSOC_GPIO_PAD_EN(g) ((g)*0x100 + 0x84)
#define SIRFSOC_RSC_PIN_MUX 0x4
+#define SIRFSOC_GPIO_PAD_EN(g) ((g)*0x100 + 0x84)
+#define SIRFSOC_GPIO_CTRL(g, i) ((g)*0x100 + (i)*4)
+#define SIRFSOC_GPIO_DSP_EN0 (0x80)
+#define SIRFSOC_GPIO_PAD_EN(g) ((g)*0x100 + 0x84)
+#define SIRFSOC_GPIO_INT_STATUS(g) ((g)*0x100 + 0x8C)
+
+#define SIRFSOC_GPIO_CTL_INTR_LOW_MASK 0x1
+#define SIRFSOC_GPIO_CTL_INTR_HIGH_MASK 0x2
+#define SIRFSOC_GPIO_CTL_INTR_TYPE_MASK 0x4
+#define SIRFSOC_GPIO_CTL_INTR_EN_MASK 0x8
+#define SIRFSOC_GPIO_CTL_INTR_STS_MASK 0x10
+#define SIRFSOC_GPIO_CTL_OUT_EN_MASK 0x20
+#define SIRFSOC_GPIO_CTL_DATAOUT_MASK 0x40
+#define SIRFSOC_GPIO_CTL_DATAIN_MASK 0x80
+#define SIRFSOC_GPIO_CTL_PULL_MASK 0x100
+#define SIRFSOC_GPIO_CTL_PULL_HIGH 0x200
+#define SIRFSOC_GPIO_CTL_DSP_INT 0x400
+
+#define SIRFSOC_GPIO_NO_OF_BANKS 5
+#define SIRFSOC_GPIO_BANK_SIZE 32
+#define SIRFSOC_GPIO_NUM(bank, index) (((bank)*(32)) + (index))
+
+struct sirfsoc_gpio_bank {
+ struct of_mm_gpio_chip chip;
+ struct irq_domain *domain;
+ int id;
+ int parent_irq;
+ spinlock_t lock;
+};
+
+static struct sirfsoc_gpio_bank sgpio_bank[SIRFSOC_GPIO_NO_OF_BANKS];
+static DEFINE_SPINLOCK(sgpio_lock);
+
/*
* pad list for the pinmux subsystem
* refer to CS-131858-DC-6A.xls
@@ -1184,7 +1221,7 @@
return ret;
}
-static const struct of_device_id pinmux_ids[] = {
+static const struct of_device_id pinmux_ids[] __devinitconst = {
{ .compatible = "sirf,prima2-gpio-pinmux" },
{}
};
@@ -1204,7 +1241,457 @@
}
arch_initcall(sirfsoc_pinmux_init);
+static inline int sirfsoc_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct sirfsoc_gpio_bank *bank = container_of(to_of_mm_gpio_chip(chip),
+ struct sirfsoc_gpio_bank, chip);
+
+ return irq_find_mapping(bank->domain, offset);
+}
+
+static inline int sirfsoc_gpio_to_offset(unsigned int gpio)
+{
+ return gpio % SIRFSOC_GPIO_BANK_SIZE;
+}
+
+static inline struct sirfsoc_gpio_bank *sirfsoc_gpio_to_bank(unsigned int gpio)
+{
+ return &sgpio_bank[gpio / SIRFSOC_GPIO_BANK_SIZE];
+}
+
+void sirfsoc_gpio_set_pull(unsigned gpio, unsigned mode)
+{
+ struct sirfsoc_gpio_bank *bank = sirfsoc_gpio_to_bank(gpio);
+ int idx = sirfsoc_gpio_to_offset(gpio);
+ u32 val, offset;
+ unsigned long flags;
+
+ offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
+
+ spin_lock_irqsave(&sgpio_lock, flags);
+
+ val = readl(bank->chip.regs + offset);
+
+ switch (mode) {
+ case SIRFSOC_GPIO_PULL_NONE:
+ val &= ~SIRFSOC_GPIO_CTL_PULL_MASK;
+ break;
+ case SIRFSOC_GPIO_PULL_UP:
+ val |= SIRFSOC_GPIO_CTL_PULL_MASK;
+ val |= SIRFSOC_GPIO_CTL_PULL_HIGH;
+ break;
+ case SIRFSOC_GPIO_PULL_DOWN:
+ val |= SIRFSOC_GPIO_CTL_PULL_MASK;
+ val &= ~SIRFSOC_GPIO_CTL_PULL_HIGH;
+ break;
+ default:
+ break;
+ }
+
+ writel(val, bank->chip.regs + offset);
+
+ spin_unlock_irqrestore(&sgpio_lock, flags);
+}
+EXPORT_SYMBOL(sirfsoc_gpio_set_pull);
+
+static inline struct sirfsoc_gpio_bank *sirfsoc_irqchip_to_bank(struct gpio_chip *chip)
+{
+ return container_of(to_of_mm_gpio_chip(chip), struct sirfsoc_gpio_bank, chip);
+}
+
+static void sirfsoc_gpio_irq_ack(struct irq_data *d)
+{
+ struct sirfsoc_gpio_bank *bank = irq_data_get_irq_chip_data(d);
+ int idx = d->hwirq % SIRFSOC_GPIO_BANK_SIZE;
+ u32 val, offset;
+ unsigned long flags;
+
+ offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
+
+ spin_lock_irqsave(&sgpio_lock, flags);
+
+ val = readl(bank->chip.regs + offset);
+
+ writel(val, bank->chip.regs + offset);
+
+ spin_unlock_irqrestore(&sgpio_lock, flags);
+}
+
+static void __sirfsoc_gpio_irq_mask(struct sirfsoc_gpio_bank *bank, int idx)
+{
+ u32 val, offset;
+ unsigned long flags;
+
+ offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
+
+ spin_lock_irqsave(&sgpio_lock, flags);
+
+ val = readl(bank->chip.regs + offset);
+ val &= ~SIRFSOC_GPIO_CTL_INTR_EN_MASK;
+ val &= ~SIRFSOC_GPIO_CTL_INTR_STS_MASK;
+ writel(val, bank->chip.regs + offset);
+
+ spin_unlock_irqrestore(&sgpio_lock, flags);
+}
+
+static void sirfsoc_gpio_irq_mask(struct irq_data *d)
+{
+ struct sirfsoc_gpio_bank *bank = irq_data_get_irq_chip_data(d);
+
+ __sirfsoc_gpio_irq_mask(bank, d->hwirq % SIRFSOC_GPIO_BANK_SIZE);
+}
+
+static void sirfsoc_gpio_irq_unmask(struct irq_data *d)
+{
+ struct sirfsoc_gpio_bank *bank = irq_data_get_irq_chip_data(d);
+ int idx = d->hwirq % SIRFSOC_GPIO_BANK_SIZE;
+ u32 val, offset;
+ unsigned long flags;
+
+ offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
+
+ spin_lock_irqsave(&sgpio_lock, flags);
+
+ val = readl(bank->chip.regs + offset);
+ val &= ~SIRFSOC_GPIO_CTL_INTR_STS_MASK;
+ val |= SIRFSOC_GPIO_CTL_INTR_EN_MASK;
+ writel(val, bank->chip.regs + offset);
+
+ spin_unlock_irqrestore(&sgpio_lock, flags);
+}
+
+static int sirfsoc_gpio_irq_type(struct irq_data *d, unsigned type)
+{
+ struct sirfsoc_gpio_bank *bank = irq_data_get_irq_chip_data(d);
+ int idx = d->hwirq % SIRFSOC_GPIO_BANK_SIZE;
+ u32 val, offset;
+ unsigned long flags;
+
+ offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
+
+ spin_lock_irqsave(&sgpio_lock, flags);
+
+ val = readl(bank->chip.regs + offset);
+ val &= ~SIRFSOC_GPIO_CTL_INTR_STS_MASK;
+
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ val |= SIRFSOC_GPIO_CTL_INTR_HIGH_MASK | SIRFSOC_GPIO_CTL_INTR_TYPE_MASK;
+ val &= ~SIRFSOC_GPIO_CTL_INTR_LOW_MASK;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ val &= ~SIRFSOC_GPIO_CTL_INTR_HIGH_MASK;
+ val |= SIRFSOC_GPIO_CTL_INTR_LOW_MASK | SIRFSOC_GPIO_CTL_INTR_TYPE_MASK;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ val |= SIRFSOC_GPIO_CTL_INTR_HIGH_MASK | SIRFSOC_GPIO_CTL_INTR_LOW_MASK |
+ SIRFSOC_GPIO_CTL_INTR_TYPE_MASK;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ val &= ~(SIRFSOC_GPIO_CTL_INTR_HIGH_MASK | SIRFSOC_GPIO_CTL_INTR_TYPE_MASK);
+ val |= SIRFSOC_GPIO_CTL_INTR_LOW_MASK;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ val |= SIRFSOC_GPIO_CTL_INTR_HIGH_MASK;
+ val &= ~(SIRFSOC_GPIO_CTL_INTR_LOW_MASK | SIRFSOC_GPIO_CTL_INTR_TYPE_MASK);
+ break;
+ }
+
+ writel(val, bank->chip.regs + offset);
+
+ spin_unlock_irqrestore(&sgpio_lock, flags);
+
+ return 0;
+}
+
+static struct irq_chip sirfsoc_irq_chip = {
+ .name = "sirf-gpio-irq",
+ .irq_ack = sirfsoc_gpio_irq_ack,
+ .irq_mask = sirfsoc_gpio_irq_mask,
+ .irq_unmask = sirfsoc_gpio_irq_unmask,
+ .irq_set_type = sirfsoc_gpio_irq_type,
+};
+
+static void sirfsoc_gpio_handle_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct sirfsoc_gpio_bank *bank = irq_get_handler_data(irq);
+ u32 status, ctrl;
+ int idx = 0;
+ unsigned int first_irq;
+
+ status = readl(bank->chip.regs + SIRFSOC_GPIO_INT_STATUS(bank->id));
+ if (!status) {
+ printk(KERN_WARNING
+ "%s: gpio id %d status %#x no interrupt is flaged\n",
+ __func__, bank->id, status);
+ handle_bad_irq(irq, desc);
+ return;
+ }
+
+ first_irq = bank->domain->revmap_data.legacy.first_irq;
+
+ while (status) {
+ ctrl = readl(bank->chip.regs + SIRFSOC_GPIO_CTRL(bank->id, idx));
+
+ /*
+ * Here we must check whether the corresponding GPIO's interrupt
+ * has been enabled, otherwise just skip it
+ */
+ if ((status & 0x1) && (ctrl & SIRFSOC_GPIO_CTL_INTR_EN_MASK)) {
+ pr_debug("%s: gpio id %d idx %d happens\n",
+ __func__, bank->id, idx);
+ generic_handle_irq(first_irq + idx);
+ }
+
+ idx++;
+ status = status >> 1;
+ }
+}
+
+static inline void sirfsoc_gpio_set_input(struct sirfsoc_gpio_bank *bank, unsigned ctrl_offset)
+{
+ u32 val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bank->lock, flags);
+
+ val = readl(bank->chip.regs + ctrl_offset);
+ val &= ~SIRFSOC_GPIO_CTL_OUT_EN_MASK;
+ writel(val, bank->chip.regs + ctrl_offset);
+
+ spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+static int sirfsoc_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
+ unsigned long flags;
+
+ if (pinctrl_request_gpio(chip->base + offset))
+ return -ENODEV;
+
+ spin_lock_irqsave(&bank->lock, flags);
+
+ /*
+ * default status:
+ * set direction as input and mask irq
+ */
+ sirfsoc_gpio_set_input(bank, SIRFSOC_GPIO_CTRL(bank->id, offset));
+ __sirfsoc_gpio_irq_mask(bank, offset);
+
+ spin_unlock_irqrestore(&bank->lock, flags);
+
+ return 0;
+}
+
+static void sirfsoc_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
+ unsigned long flags;
+
+ spin_lock_irqsave(&bank->lock, flags);
+
+ __sirfsoc_gpio_irq_mask(bank, offset);
+ sirfsoc_gpio_set_input(bank, SIRFSOC_GPIO_CTRL(bank->id, offset));
+
+ spin_unlock_irqrestore(&bank->lock, flags);
+
+ pinctrl_free_gpio(chip->base + offset);
+}
+
+static int sirfsoc_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+ struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
+ int idx = sirfsoc_gpio_to_offset(gpio);
+ unsigned long flags;
+ unsigned offset;
+
+ offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
+
+ spin_lock_irqsave(&bank->lock, flags);
+
+ sirfsoc_gpio_set_input(bank, offset);
+
+ spin_unlock_irqrestore(&bank->lock, flags);
+
+ return 0;
+}
+
+static inline void sirfsoc_gpio_set_output(struct sirfsoc_gpio_bank *bank, unsigned offset,
+ int value)
+{
+ u32 out_ctrl;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bank->lock, flags);
+
+ out_ctrl = readl(bank->chip.regs + offset);
+ if (value)
+ out_ctrl |= SIRFSOC_GPIO_CTL_DATAOUT_MASK;
+ else
+ out_ctrl &= ~SIRFSOC_GPIO_CTL_DATAOUT_MASK;
+
+ out_ctrl &= ~SIRFSOC_GPIO_CTL_INTR_EN_MASK;
+ out_ctrl |= SIRFSOC_GPIO_CTL_OUT_EN_MASK;
+ writel(out_ctrl, bank->chip.regs + offset);
+
+ spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+static int sirfsoc_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value)
+{
+ struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
+ int idx = sirfsoc_gpio_to_offset(gpio);
+ u32 offset;
+ unsigned long flags;
+
+ offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
+
+ spin_lock_irqsave(&sgpio_lock, flags);
+
+ sirfsoc_gpio_set_output(bank, offset, value);
+
+ spin_unlock_irqrestore(&sgpio_lock, flags);
+
+ return 0;
+}
+
+static int sirfsoc_gpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+ struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
+ u32 val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bank->lock, flags);
+
+ val = readl(bank->chip.regs + SIRFSOC_GPIO_CTRL(bank->id, offset));
+
+ spin_unlock_irqrestore(&bank->lock, flags);
+
+ return !!(val & SIRFSOC_GPIO_CTL_DATAIN_MASK);
+}
+
+static void sirfsoc_gpio_set_value(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
+ u32 ctrl;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bank->lock, flags);
+
+ ctrl = readl(bank->chip.regs + SIRFSOC_GPIO_CTRL(bank->id, offset));
+ if (value)
+ ctrl |= SIRFSOC_GPIO_CTL_DATAOUT_MASK;
+ else
+ ctrl &= ~SIRFSOC_GPIO_CTL_DATAOUT_MASK;
+ writel(ctrl, bank->chip.regs + SIRFSOC_GPIO_CTRL(bank->id, offset));
+
+ spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+int sirfsoc_gpio_irq_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ struct sirfsoc_gpio_bank *bank = d->host_data;
+
+ if (!bank)
+ return -EINVAL;
+
+ irq_set_chip(irq, &sirfsoc_irq_chip);
+ irq_set_handler(irq, handle_level_irq);
+ irq_set_chip_data(irq, bank);
+ set_irq_flags(irq, IRQF_VALID);
+
+ return 0;
+}
+
+const struct irq_domain_ops sirfsoc_gpio_irq_simple_ops = {
+ .map = sirfsoc_gpio_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static int __devinit sirfsoc_gpio_probe(struct device_node *np)
+{
+ int i, err = 0;
+ struct sirfsoc_gpio_bank *bank;
+ void *regs;
+ struct platform_device *pdev;
+
+ pdev = of_find_device_by_node(np);
+ if (!pdev)
+ return -ENODEV;
+
+ regs = of_iomap(np, 0);
+ if (!regs)
+ return -ENOMEM;
+
+ for (i = 0; i < SIRFSOC_GPIO_NO_OF_BANKS; i++) {
+ bank = &sgpio_bank[i];
+ spin_lock_init(&bank->lock);
+ bank->chip.gc.request = sirfsoc_gpio_request;
+ bank->chip.gc.free = sirfsoc_gpio_free;
+ bank->chip.gc.direction_input = sirfsoc_gpio_direction_input;
+ bank->chip.gc.get = sirfsoc_gpio_get_value;
+ bank->chip.gc.direction_output = sirfsoc_gpio_direction_output;
+ bank->chip.gc.set = sirfsoc_gpio_set_value;
+ bank->chip.gc.to_irq = sirfsoc_gpio_to_irq;
+ bank->chip.gc.base = i * SIRFSOC_GPIO_BANK_SIZE;
+ bank->chip.gc.ngpio = SIRFSOC_GPIO_BANK_SIZE;
+ bank->chip.gc.label = kstrdup(np->full_name, GFP_KERNEL);
+ bank->chip.gc.of_node = np;
+ bank->chip.regs = regs;
+ bank->id = i;
+ bank->parent_irq = platform_get_irq(pdev, i);
+ if (bank->parent_irq < 0) {
+ err = bank->parent_irq;
+ goto out;
+ }
+
+ err = gpiochip_add(&bank->chip.gc);
+ if (err) {
+ pr_err("%s: error in probe function with status %d\n",
+ np->full_name, err);
+ goto out;
+ }
+
+ bank->domain = irq_domain_add_legacy(np, SIRFSOC_GPIO_BANK_SIZE,
+ SIRFSOC_GPIO_IRQ_START + i * SIRFSOC_GPIO_BANK_SIZE, 0,
+ &sirfsoc_gpio_irq_simple_ops, bank);
+
+ if (!bank->domain) {
+ pr_err("%s: Failed to create irqdomain\n", np->full_name);
+ err = -ENOSYS;
+ goto out;
+ }
+
+ irq_set_chained_handler(bank->parent_irq, sirfsoc_gpio_handle_irq);
+ irq_set_handler_data(bank->parent_irq, bank);
+ }
+
+out:
+ iounmap(regs);
+ return err;
+}
+
+static int __init sirfsoc_gpio_init(void)
+{
+
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, pinmux_ids);
+
+ if (!np)
+ return -ENODEV;
+
+ return sirfsoc_gpio_probe(np);
+}
+subsys_initcall(sirfsoc_gpio_init);
+
MODULE_AUTHOR("Rongjun Ying <rongjun.ying@csr.com>, "
+ "Yuping Luo <yuping.luo@csr.com>, "
"Barry Song <baohua.song@csr.com>");
MODULE_DESCRIPTION("SIRFSOC pin control driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/pinctrl/spear/pinctrl-spear.c b/drivers/pinctrl/spear/pinctrl-spear.c
index 5ae50aa..b3f6b28 100644
--- a/drivers/pinctrl/spear/pinctrl-spear.c
+++ b/drivers/pinctrl/spear/pinctrl-spear.c
@@ -2,7 +2,7 @@
* Driver for the ST Microelectronics SPEAr pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* Inspired from:
* - U300 Pinctl drivers
diff --git a/drivers/pinctrl/spear/pinctrl-spear.h b/drivers/pinctrl/spear/pinctrl-spear.h
index 9155783..d950eb7 100644
--- a/drivers/pinctrl/spear/pinctrl-spear.h
+++ b/drivers/pinctrl/spear/pinctrl-spear.h
@@ -2,7 +2,7 @@
* Driver header file for the ST Microelectronics SPEAr pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/drivers/pinctrl/spear/pinctrl-spear1310.c b/drivers/pinctrl/spear/pinctrl-spear1310.c
index fff168b..d6cca8c 100644
--- a/drivers/pinctrl/spear/pinctrl-spear1310.c
+++ b/drivers/pinctrl/spear/pinctrl-spear1310.c
@@ -2,7 +2,7 @@
* Driver for the ST Microelectronics SPEAr1310 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
@@ -2192,7 +2192,7 @@
}
module_exit(spear1310_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr1310 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear1310_pinctrl_of_match);
diff --git a/drivers/pinctrl/spear/pinctrl-spear1340.c b/drivers/pinctrl/spear/pinctrl-spear1340.c
index a8ab2a6..a0eb057 100644
--- a/drivers/pinctrl/spear/pinctrl-spear1340.c
+++ b/drivers/pinctrl/spear/pinctrl-spear1340.c
@@ -2,7 +2,7 @@
* Driver for the ST Microelectronics SPEAr1340 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
@@ -1983,7 +1983,7 @@
}
module_exit(spear1340_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr1340 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear1340_pinctrl_of_match);
diff --git a/drivers/pinctrl/spear/pinctrl-spear300.c b/drivers/pinctrl/spear/pinctrl-spear300.c
index 9c82a35..4dfc284 100644
--- a/drivers/pinctrl/spear/pinctrl-spear300.c
+++ b/drivers/pinctrl/spear/pinctrl-spear300.c
@@ -2,7 +2,7 @@
* Driver for the ST Microelectronics SPEAr300 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
@@ -702,7 +702,7 @@
}
module_exit(spear300_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr300 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear300_pinctrl_of_match);
diff --git a/drivers/pinctrl/spear/pinctrl-spear310.c b/drivers/pinctrl/spear/pinctrl-spear310.c
index 1a97076..9688369 100644
--- a/drivers/pinctrl/spear/pinctrl-spear310.c
+++ b/drivers/pinctrl/spear/pinctrl-spear310.c
@@ -2,7 +2,7 @@
* Driver for the ST Microelectronics SPEAr310 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
@@ -425,7 +425,7 @@
}
module_exit(spear310_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr310 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, SPEAr310_pinctrl_of_match);
diff --git a/drivers/pinctrl/spear/pinctrl-spear320.c b/drivers/pinctrl/spear/pinctrl-spear320.c
index de726e6..020b1e0 100644
--- a/drivers/pinctrl/spear/pinctrl-spear320.c
+++ b/drivers/pinctrl/spear/pinctrl-spear320.c
@@ -2,7 +2,7 @@
* Driver for the ST Microelectronics SPEAr320 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
@@ -3462,7 +3462,7 @@
}
module_exit(spear320_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr320 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear320_pinctrl_of_match);
diff --git a/drivers/pinctrl/spear/pinctrl-spear3xx.c b/drivers/pinctrl/spear/pinctrl-spear3xx.c
index 91c883b..0242378 100644
--- a/drivers/pinctrl/spear/pinctrl-spear3xx.c
+++ b/drivers/pinctrl/spear/pinctrl-spear3xx.c
@@ -2,7 +2,7 @@
* Driver for the ST Microelectronics SPEAr3xx pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/drivers/pinctrl/spear/pinctrl-spear3xx.h b/drivers/pinctrl/spear/pinctrl-spear3xx.h
index 5d5fdd8..31f4434 100644
--- a/drivers/pinctrl/spear/pinctrl-spear3xx.h
+++ b/drivers/pinctrl/spear/pinctrl-spear3xx.h
@@ -2,7 +2,7 @@
* Header file for the ST Microelectronics SPEAr3xx pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index ce875dc..c8f40c9 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -1877,8 +1877,7 @@
return 0;
}
-static int acer_platform_suspend(struct platform_device *dev,
-pm_message_t state)
+static int acer_suspend(struct device *dev)
{
u32 value;
struct acer_data *data = &interface->data;
@@ -1900,7 +1899,7 @@
return 0;
}
-static int acer_platform_resume(struct platform_device *device)
+static int acer_resume(struct device *dev)
{
struct acer_data *data = &interface->data;
@@ -1916,6 +1915,8 @@
return 0;
}
+static SIMPLE_DEV_PM_OPS(acer_pm, acer_suspend, acer_resume);
+
static void acer_platform_shutdown(struct platform_device *device)
{
struct acer_data *data = &interface->data;
@@ -1931,11 +1932,10 @@
.driver = {
.name = "acer-wmi",
.owner = THIS_MODULE,
+ .pm = &acer_pm,
},
.probe = acer_platform_probe,
.remove = acer_platform_remove,
- .suspend = acer_platform_suspend,
- .resume = acer_platform_resume,
.shutdown = acer_platform_shutdown,
};
diff --git a/drivers/platform/x86/classmate-laptop.c b/drivers/platform/x86/classmate-laptop.c
index 94f93b6..e2230a2 100644
--- a/drivers/platform/x86/classmate-laptop.c
+++ b/drivers/platform/x86/classmate-laptop.c
@@ -362,15 +362,18 @@
return cmpc_remove_acpi_notify_device(acpi);
}
-static int cmpc_tablet_resume(struct acpi_device *acpi)
+static int cmpc_tablet_resume(struct device *dev)
{
- struct input_dev *inputdev = dev_get_drvdata(&acpi->dev);
+ struct input_dev *inputdev = dev_get_drvdata(dev);
+
unsigned long long val = 0;
- if (ACPI_SUCCESS(cmpc_get_tablet(acpi->handle, &val)))
+ if (ACPI_SUCCESS(cmpc_get_tablet(to_acpi_device(dev)->handle, &val)))
input_report_switch(inputdev, SW_TABLET_MODE, !val);
return 0;
}
+static SIMPLE_DEV_PM_OPS(cmpc_tablet_pm, NULL, cmpc_tablet_resume);
+
static const struct acpi_device_id cmpc_tablet_device_ids[] = {
{CMPC_TABLET_HID, 0},
{"", 0}
@@ -384,9 +387,9 @@
.ops = {
.add = cmpc_tablet_add,
.remove = cmpc_tablet_remove,
- .resume = cmpc_tablet_resume,
.notify = cmpc_tablet_handler,
- }
+ },
+ .drv.pm = &cmpc_tablet_pm,
};
diff --git a/drivers/platform/x86/fujitsu-tablet.c b/drivers/platform/x86/fujitsu-tablet.c
index da267ea..d2e4173 100644
--- a/drivers/platform/x86/fujitsu-tablet.c
+++ b/drivers/platform/x86/fujitsu-tablet.c
@@ -440,12 +440,14 @@
return 0;
}
-static int acpi_fujitsu_resume(struct acpi_device *adev)
+static int acpi_fujitsu_resume(struct device *dev)
{
fujitsu_reset();
return 0;
}
+static SIMPLE_DEV_PM_OPS(acpi_fujitsu_pm, NULL, acpi_fujitsu_resume);
+
static struct acpi_driver acpi_fujitsu_driver = {
.name = MODULENAME,
.class = "hotkey",
@@ -453,8 +455,8 @@
.ops = {
.add = acpi_fujitsu_add,
.remove = acpi_fujitsu_remove,
- .resume = acpi_fujitsu_resume,
- }
+ },
+ .drv.pm = &acpi_fujitsu_pm,
};
static int __init fujitsu_module_init(void)
diff --git a/drivers/platform/x86/hdaps.c b/drivers/platform/x86/hdaps.c
index 24a3ae0..d9ab6f6 100644
--- a/drivers/platform/x86/hdaps.c
+++ b/drivers/platform/x86/hdaps.c
@@ -305,17 +305,19 @@
return 0;
}
-static int hdaps_resume(struct platform_device *dev)
+static int hdaps_resume(struct device *dev)
{
return hdaps_device_init();
}
+static SIMPLE_DEV_PM_OPS(hdaps_pm, NULL, hdaps_resume);
+
static struct platform_driver hdaps_driver = {
.probe = hdaps_probe,
- .resume = hdaps_resume,
.driver = {
.name = "hdaps",
.owner = THIS_MODULE,
+ .pm = &hdaps_pm,
},
};
diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c
index 22b2dfa..f4d9115 100644
--- a/drivers/platform/x86/hp_accel.c
+++ b/drivers/platform/x86/hp_accel.c
@@ -353,20 +353,22 @@
#ifdef CONFIG_PM
-static int lis3lv02d_suspend(struct acpi_device *device, pm_message_t state)
+static int lis3lv02d_suspend(struct device *dev)
{
/* make sure the device is off when we suspend */
lis3lv02d_poweroff(&lis3_dev);
return 0;
}
-static int lis3lv02d_resume(struct acpi_device *device)
+static int lis3lv02d_resume(struct device *dev)
{
return lis3lv02d_poweron(&lis3_dev);
}
+
+static SIMPLE_DEV_PM_OPS(hp_accel_pm, lis3lv02d_suspend, lis3lv02d_resume);
+#define HP_ACCEL_PM (&hp_accel_pm)
#else
-#define lis3lv02d_suspend NULL
-#define lis3lv02d_resume NULL
+#define HP_ACCEL_PM NULL
#endif
/* For the HP MDPS aka 3D Driveguard */
@@ -377,9 +379,8 @@
.ops = {
.add = lis3lv02d_add,
.remove = lis3lv02d_remove,
- .suspend = lis3lv02d_suspend,
- .resume = lis3lv02d_resume,
- }
+ },
+ .drv.pm = HP_ACCEL_PM,
};
static int __init lis3lv02d_init_module(void)
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 4f20f8d..17f6dfd 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -694,10 +694,10 @@
static int __devinit ideapad_acpi_add(struct acpi_device *adevice)
{
int ret, i;
- unsigned long cfg;
+ int cfg;
struct ideapad_private *priv;
- if (read_method_int(adevice->handle, "_CFG", (int *)&cfg))
+ if (read_method_int(adevice->handle, "_CFG", &cfg))
return -ENODEV;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
@@ -721,7 +721,7 @@
goto input_failed;
for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) {
- if (test_bit(ideapad_rfk_data[i].cfgbit, &cfg))
+ if (test_bit(ideapad_rfk_data[i].cfgbit, &priv->cfg))
ideapad_register_rfkill(adevice, i);
else
priv->rfk[i] = NULL;
diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c
index 0ffdb3c..5051aa9 100644
--- a/drivers/platform/x86/intel_ips.c
+++ b/drivers/platform/x86/intel_ips.c
@@ -72,6 +72,7 @@
#include <linux/string.h>
#include <linux/tick.h>
#include <linux/timer.h>
+#include <linux/dmi.h>
#include <drm/i915_drm.h>
#include <asm/msr.h>
#include <asm/processor.h>
@@ -1485,6 +1486,24 @@
MODULE_DEVICE_TABLE(pci, ips_id_table);
+static int ips_blacklist_callback(const struct dmi_system_id *id)
+{
+ pr_info("Blacklisted intel_ips for %s\n", id->ident);
+ return 1;
+}
+
+static const struct dmi_system_id ips_blacklist[] = {
+ {
+ .callback = ips_blacklist_callback,
+ .ident = "HP ProBook",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP ProBook"),
+ },
+ },
+ { } /* terminating entry */
+};
+
static int ips_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
u64 platform_info;
@@ -1494,6 +1513,9 @@
u16 htshi, trc, trc_required_mask;
u8 tse;
+ if (dmi_check_system(ips_blacklist))
+ return -ENODEV;
+
ips = kzalloc(sizeof(struct ips_driver), GFP_KERNEL);
if (!ips)
return -ENOMEM;
@@ -1697,21 +1719,6 @@
dev_dbg(&dev->dev, "IPS driver removed\n");
}
-#ifdef CONFIG_PM
-static int ips_suspend(struct pci_dev *dev, pm_message_t state)
-{
- return 0;
-}
-
-static int ips_resume(struct pci_dev *dev)
-{
- return 0;
-}
-#else
-#define ips_suspend NULL
-#define ips_resume NULL
-#endif /* CONFIG_PM */
-
static void ips_shutdown(struct pci_dev *dev)
{
}
@@ -1721,8 +1728,6 @@
.id_table = ips_id_table,
.probe = ips_probe,
.remove = ips_remove,
- .suspend = ips_suspend,
- .resume = ips_resume,
.shutdown = ips_shutdown,
};
diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c
index 5ae9cd9..ea7422f 100644
--- a/drivers/platform/x86/intel_mid_thermal.c
+++ b/drivers/platform/x86/intel_mid_thermal.c
@@ -418,23 +418,23 @@
/**
* mid_thermal_resume - resume routine
- * @pdev: platform device structure
+ * @dev: device structure
*
* mid thermal resume: re-initializes the adc. Can sleep.
*/
-static int mid_thermal_resume(struct platform_device *pdev)
+static int mid_thermal_resume(struct device *dev)
{
- return mid_initialize_adc(&pdev->dev);
+ return mid_initialize_adc(dev);
}
/**
* mid_thermal_suspend - suspend routine
- * @pdev: platform device structure
+ * @dev: device structure
*
* mid thermal suspend implements the suspend functionality
* by stopping the ADC. Can sleep.
*/
-static int mid_thermal_suspend(struct platform_device *pdev, pm_message_t mesg)
+static int mid_thermal_suspend(struct device *dev)
{
/*
* This just stops the ADC and does not disable it.
@@ -444,6 +444,9 @@
return configure_adc(0);
}
+static SIMPLE_DEV_PM_OPS(mid_thermal_pm,
+ mid_thermal_suspend, mid_thermal_resume);
+
/**
* read_curr_temp - reads the current temperature and stores in temp
* @temp: holds the current temperature value after reading
@@ -557,10 +560,9 @@
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+ .pm = &mid_thermal_pm,
},
.probe = mid_thermal_probe,
- .suspend = mid_thermal_suspend,
- .resume = mid_thermal_resume,
.remove = __devexit_p(mid_thermal_remove),
.id_table = therm_id_table,
};
diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c
index bb51321..f644418 100644
--- a/drivers/platform/x86/msi-laptop.c
+++ b/drivers/platform/x86/msi-laptop.c
@@ -85,7 +85,8 @@
#define MSI_STANDARD_EC_TOUCHPAD_ADDRESS 0xe4
#define MSI_STANDARD_EC_TOUCHPAD_MASK (1 << 4)
-static int msi_laptop_resume(struct platform_device *device);
+static int msi_laptop_resume(struct device *device);
+static SIMPLE_DEV_PM_OPS(msi_laptop_pm, NULL, msi_laptop_resume);
#define MSI_STANDARD_EC_DEVICES_EXISTS_ADDRESS 0x2f
@@ -437,8 +438,8 @@
.driver = {
.name = "msi-laptop-pf",
.owner = THIS_MODULE,
+ .pm = &msi_laptop_pm,
},
- .resume = msi_laptop_resume,
};
static struct platform_device *msipf_device;
@@ -752,7 +753,7 @@
return retval;
}
-static int msi_laptop_resume(struct platform_device *device)
+static int msi_laptop_resume(struct device *device)
{
u8 data;
int result;
diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c
index ffff8b4..2448007 100644
--- a/drivers/platform/x86/panasonic-laptop.c
+++ b/drivers/platform/x86/panasonic-laptop.c
@@ -177,7 +177,6 @@
static int acpi_pcc_hotkey_add(struct acpi_device *device);
static int acpi_pcc_hotkey_remove(struct acpi_device *device, int type);
-static int acpi_pcc_hotkey_resume(struct acpi_device *device);
static void acpi_pcc_hotkey_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id pcc_device_ids[] = {
@@ -189,6 +188,9 @@
};
MODULE_DEVICE_TABLE(acpi, pcc_device_ids);
+static int acpi_pcc_hotkey_resume(struct device *dev);
+static SIMPLE_DEV_PM_OPS(acpi_pcc_hotkey_pm, NULL, acpi_pcc_hotkey_resume);
+
static struct acpi_driver acpi_pcc_driver = {
.name = ACPI_PCC_DRIVER_NAME,
.class = ACPI_PCC_CLASS,
@@ -196,9 +198,9 @@
.ops = {
.add = acpi_pcc_hotkey_add,
.remove = acpi_pcc_hotkey_remove,
- .resume = acpi_pcc_hotkey_resume,
.notify = acpi_pcc_hotkey_notify,
},
+ .drv.pm = &acpi_pcc_hotkey_pm,
};
static const struct key_entry panasonic_keymap[] = {
@@ -538,11 +540,15 @@
/* kernel module interface */
-static int acpi_pcc_hotkey_resume(struct acpi_device *device)
+static int acpi_pcc_hotkey_resume(struct device *dev)
{
- struct pcc_acpi *pcc = acpi_driver_data(device);
+ struct pcc_acpi *pcc;
- if (device == NULL || pcc == NULL)
+ if (!dev)
+ return -EINVAL;
+
+ pcc = acpi_driver_data(to_acpi_device(dev));
+ if (!pcc)
return -EINVAL;
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Sticky mode restore: %d\n",
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index 210d4ae..9363969 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -973,7 +973,7 @@
struct device_attribute *attr,
const char *buffer, size_t count)
{
- unsigned long value = 0;
+ int value;
int ret = 0;
struct sony_nc_value *item =
container_of(attr, struct sony_nc_value, devattr);
@@ -984,7 +984,7 @@
if (count > 31)
return -EINVAL;
- if (kstrtoul(buffer, 10, &value))
+ if (kstrtoint(buffer, 10, &value))
return -EINVAL;
if (item->validate)
@@ -994,7 +994,7 @@
return value;
ret = sony_nc_int_call(sony_nc_acpi_handle, *item->acpiset,
- (int *)&value, NULL);
+ &value, NULL);
if (ret < 0)
return -EIO;
@@ -1010,6 +1010,7 @@
struct sony_backlight_props {
struct backlight_device *dev;
int handle;
+ int cmd_base;
u8 offset;
u8 maxlvl;
};
@@ -1037,7 +1038,7 @@
struct sony_backlight_props *sdev =
(struct sony_backlight_props *)bl_get_data(bd);
- sony_call_snc_handle(sdev->handle, 0x0200, &result);
+ sony_call_snc_handle(sdev->handle, sdev->cmd_base + 0x100, &result);
return (result & 0xff) - sdev->offset;
}
@@ -1049,7 +1050,8 @@
(struct sony_backlight_props *)bl_get_data(bd);
value = bd->props.brightness + sdev->offset;
- if (sony_call_snc_handle(sdev->handle, 0x0100 | (value << 16), &result))
+ if (sony_call_snc_handle(sdev->handle, sdev->cmd_base | (value << 0x10),
+ &result))
return -EIO;
return value;
@@ -1172,6 +1174,11 @@
/*
* ACPI callbacks
*/
+enum event_types {
+ HOTKEY = 1,
+ KILLSWITCH,
+ GFX_SWITCH
+};
static void sony_nc_notify(struct acpi_device *device, u32 event)
{
u32 real_ev = event;
@@ -1196,7 +1203,7 @@
/* hotkey event */
case 0x0100:
case 0x0127:
- ev_type = 1;
+ ev_type = HOTKEY;
real_ev = sony_nc_hotkeys_decode(event, handle);
if (real_ev > 0)
@@ -1216,7 +1223,7 @@
* update the rfkill device status when the
* switch is moved.
*/
- ev_type = 2;
+ ev_type = KILLSWITCH;
sony_call_snc_handle(handle, 0x0100, &result);
real_ev = result & 0x03;
@@ -1226,6 +1233,24 @@
break;
+ case 0x0128:
+ case 0x0146:
+ /* Hybrid GFX switching */
+ sony_call_snc_handle(handle, 0x0000, &result);
+ dprintk("GFX switch event received (reason: %s)\n",
+ (result & 0x01) ?
+ "switch change" : "unknown");
+
+ /* verify the switch state
+ * 1: discrete GFX
+ * 0: integrated GFX
+ */
+ sony_call_snc_handle(handle, 0x0100, &result);
+
+ ev_type = GFX_SWITCH;
+ real_ev = result & 0xff;
+ break;
+
default:
dprintk("Unknown event 0x%x for handle 0x%x\n",
event, handle);
@@ -1238,7 +1263,7 @@
} else {
/* old style event */
- ev_type = 1;
+ ev_type = HOTKEY;
sony_laptop_report_input_event(real_ev);
}
@@ -1452,7 +1477,7 @@
&result);
}
-static int sony_nc_resume(struct acpi_device *device)
+static int sony_nc_resume(struct device *dev)
{
struct sony_nc_value *item;
acpi_handle handle;
@@ -1484,6 +1509,8 @@
return 0;
}
+static SIMPLE_DEV_PM_OPS(sony_nc_pm, NULL, sony_nc_resume);
+
static void sony_nc_rfkill_cleanup(void)
{
int i;
@@ -1893,32 +1920,33 @@
* bits 4,5: store the limit into the EC
* bits 6,7: store the limit into the battery
*/
+ cmd = 0;
- /*
- * handle 0x0115 should allow storing on battery too;
- * handle 0x0136 same as 0x0115 + health status;
- * handle 0x013f, same as 0x0136 but no storing on the battery
- *
- * Store only inside the EC for now, regardless the handle number
- */
- if (value == 0)
- /* disable limits */
- cmd = 0x0;
+ if (value > 0) {
+ if (value <= 50)
+ cmd = 0x20;
- else if (value <= 50)
- cmd = 0x21;
+ else if (value <= 80)
+ cmd = 0x10;
- else if (value <= 80)
- cmd = 0x11;
+ else if (value <= 100)
+ cmd = 0x30;
- else if (value <= 100)
- cmd = 0x31;
+ else
+ return -EINVAL;
- else
- return -EINVAL;
+ /*
+ * handle 0x0115 should allow storing on battery too;
+ * handle 0x0136 same as 0x0115 + health status;
+ * handle 0x013f, same as 0x0136 but no storing on the battery
+ */
+ if (bcare_ctl->handle != 0x013f)
+ cmd = cmd | (cmd << 2);
- if (sony_call_snc_handle(bcare_ctl->handle, (cmd << 0x10) | 0x0100,
- &result))
+ cmd = (cmd | 0x1) << 0x10;
+ }
+
+ if (sony_call_snc_handle(bcare_ctl->handle, cmd | 0x0100, &result))
return -EIO;
return count;
@@ -2113,7 +2141,7 @@
struct device_attribute *attr, char *buffer)
{
ssize_t count = 0;
- unsigned int mode = sony_nc_thermal_mode_get();
+ int mode = sony_nc_thermal_mode_get();
if (mode < 0)
return mode;
@@ -2472,6 +2500,7 @@
{
u64 offset;
int i;
+ int lvl_table_len = 0;
u8 min = 0xff, max = 0x00;
unsigned char buffer[32] = { 0 };
@@ -2480,8 +2509,6 @@
props->maxlvl = 0xff;
offset = sony_find_snc_handle(handle);
- if (offset < 0)
- return;
/* try to read the boundaries from ACPI tables, if we fail the above
* defaults should be reasonable
@@ -2491,11 +2518,21 @@
if (i < 0)
return;
+ switch (handle) {
+ case 0x012f:
+ case 0x0137:
+ lvl_table_len = 9;
+ break;
+ case 0x143:
+ lvl_table_len = 16;
+ break;
+ }
+
/* the buffer lists brightness levels available, brightness levels are
* from position 0 to 8 in the array, other values are used by ALS
* control.
*/
- for (i = 0; i < 9 && i < ARRAY_SIZE(buffer); i++) {
+ for (i = 0; i < lvl_table_len && i < ARRAY_SIZE(buffer); i++) {
dprintk("Brightness level: %d\n", buffer[i]);
@@ -2520,16 +2557,24 @@
const struct backlight_ops *ops = NULL;
struct backlight_properties props;
- if (sony_find_snc_handle(0x12f) != -1) {
+ if (sony_find_snc_handle(0x12f) >= 0) {
ops = &sony_backlight_ng_ops;
+ sony_bl_props.cmd_base = 0x0100;
sony_nc_backlight_ng_read_limits(0x12f, &sony_bl_props);
max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset;
- } else if (sony_find_snc_handle(0x137) != -1) {
+ } else if (sony_find_snc_handle(0x137) >= 0) {
ops = &sony_backlight_ng_ops;
+ sony_bl_props.cmd_base = 0x0100;
sony_nc_backlight_ng_read_limits(0x137, &sony_bl_props);
max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset;
+ } else if (sony_find_snc_handle(0x143) >= 0) {
+ ops = &sony_backlight_ng_ops;
+ sony_bl_props.cmd_base = 0x3000;
+ sony_nc_backlight_ng_read_limits(0x143, &sony_bl_props);
+ max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset;
+
} else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT",
&unused))) {
ops = &sony_backlight_ops;
@@ -2597,6 +2642,12 @@
}
}
+ result = sony_laptop_setup_input(device);
+ if (result) {
+ pr_err("Unable to create input devices\n");
+ goto outplatform;
+ }
+
if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "ECON",
&handle))) {
int arg = 1;
@@ -2614,12 +2665,6 @@
}
/* setup input devices and helper fifo */
- result = sony_laptop_setup_input(device);
- if (result) {
- pr_err("Unable to create input devices\n");
- goto outsnc;
- }
-
if (acpi_video_backlight_support()) {
pr_info("brightness ignored, must be controlled by ACPI video driver\n");
} else {
@@ -2667,22 +2712,21 @@
return 0;
- out_sysfs:
+out_sysfs:
for (item = sony_nc_values; item->name; ++item) {
device_remove_file(&sony_pf_device->dev, &item->devattr);
}
sony_nc_backlight_cleanup();
-
- sony_laptop_remove_input();
-
- outsnc:
sony_nc_function_cleanup(sony_pf_device);
sony_nc_handles_cleanup(sony_pf_device);
- outpresent:
+outplatform:
+ sony_laptop_remove_input();
+
+outpresent:
sony_pf_remove();
- outwalk:
+outwalk:
sony_nc_rfkill_cleanup();
return result;
}
@@ -2728,9 +2772,9 @@
.ops = {
.add = sony_nc_add,
.remove = sony_nc_remove,
- .resume = sony_nc_resume,
.notify = sony_nc_notify,
},
+ .drv.pm = &sony_nc_pm,
};
/*********** SPIC (SNY6001) Device ***********/
@@ -4243,19 +4287,22 @@
return result;
}
-static int sony_pic_suspend(struct acpi_device *device, pm_message_t state)
+static int sony_pic_suspend(struct device *dev)
{
- if (sony_pic_disable(device))
+ if (sony_pic_disable(to_acpi_device(dev)))
return -ENXIO;
return 0;
}
-static int sony_pic_resume(struct acpi_device *device)
+static int sony_pic_resume(struct device *dev)
{
- sony_pic_enable(device, spic_dev.cur_ioport, spic_dev.cur_irq);
+ sony_pic_enable(to_acpi_device(dev),
+ spic_dev.cur_ioport, spic_dev.cur_irq);
return 0;
}
+static SIMPLE_DEV_PM_OPS(sony_pic_pm, sony_pic_suspend, sony_pic_resume);
+
static const struct acpi_device_id sony_pic_device_ids[] = {
{SONY_PIC_HID, 0},
{"", 0},
@@ -4269,9 +4316,8 @@
.ops = {
.add = sony_pic_add,
.remove = sony_pic_remove,
- .suspend = sony_pic_suspend,
- .resume = sony_pic_resume,
},
+ .drv.pm = &sony_pic_pm,
};
static struct dmi_system_id __initdata sonypi_dmi_table[] = {
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 8b5610d..d5fd4a1 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -277,7 +277,7 @@
int (*write) (char *);
void (*exit) (void);
void (*resume) (void);
- void (*suspend) (pm_message_t state);
+ void (*suspend) (void);
void (*shutdown) (void);
struct list_head all_drivers;
@@ -922,8 +922,7 @@
static struct mutex tpacpi_inputdev_send_mutex;
static LIST_HEAD(tpacpi_all_drivers);
-static int tpacpi_suspend_handler(struct platform_device *pdev,
- pm_message_t state)
+static int tpacpi_suspend_handler(struct device *dev)
{
struct ibm_struct *ibm, *itmp;
@@ -931,13 +930,13 @@
&tpacpi_all_drivers,
all_drivers) {
if (ibm->suspend)
- (ibm->suspend)(state);
+ (ibm->suspend)();
}
return 0;
}
-static int tpacpi_resume_handler(struct platform_device *pdev)
+static int tpacpi_resume_handler(struct device *dev)
{
struct ibm_struct *ibm, *itmp;
@@ -951,6 +950,9 @@
return 0;
}
+static SIMPLE_DEV_PM_OPS(tpacpi_pm,
+ tpacpi_suspend_handler, tpacpi_resume_handler);
+
static void tpacpi_shutdown_handler(struct platform_device *pdev)
{
struct ibm_struct *ibm, *itmp;
@@ -967,9 +969,8 @@
.driver = {
.name = TPACPI_DRVR_NAME,
.owner = THIS_MODULE,
+ .pm = &tpacpi_pm,
},
- .suspend = tpacpi_suspend_handler,
- .resume = tpacpi_resume_handler,
.shutdown = tpacpi_shutdown_handler,
};
@@ -3758,7 +3759,7 @@
}
}
-static void hotkey_suspend(pm_message_t state)
+static void hotkey_suspend(void)
{
/* Do these on suspend, we get the events on early resume! */
hotkey_wakeup_reason = TP_ACPI_WAKEUP_NONE;
@@ -6329,7 +6330,7 @@
return 0;
}
-static void brightness_suspend(pm_message_t state)
+static void brightness_suspend(void)
{
tpacpi_brightness_checkpoint_nvram();
}
@@ -6748,7 +6749,7 @@
.get = volume_alsa_mute_get,
};
-static void volume_suspend(pm_message_t state)
+static void volume_suspend(void)
{
tpacpi_volume_checkpoint_nvram();
}
@@ -8107,7 +8108,7 @@
flush_workqueue(tpacpi_wq);
}
-static void fan_suspend(pm_message_t state)
+static void fan_suspend(void)
{
int rc;
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index dab10f6..c13ba5b 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -1296,10 +1296,9 @@
}
}
-static int toshiba_acpi_suspend(struct acpi_device *acpi_dev,
- pm_message_t state)
+static int toshiba_acpi_suspend(struct device *device)
{
- struct toshiba_acpi_dev *dev = acpi_driver_data(acpi_dev);
+ struct toshiba_acpi_dev *dev = acpi_driver_data(to_acpi_device(device));
u32 result;
if (dev->hotkey_dev)
@@ -1308,9 +1307,9 @@
return 0;
}
-static int toshiba_acpi_resume(struct acpi_device *acpi_dev)
+static int toshiba_acpi_resume(struct device *device)
{
- struct toshiba_acpi_dev *dev = acpi_driver_data(acpi_dev);
+ struct toshiba_acpi_dev *dev = acpi_driver_data(to_acpi_device(device));
u32 result;
if (dev->hotkey_dev)
@@ -1319,6 +1318,9 @@
return 0;
}
+static SIMPLE_DEV_PM_OPS(toshiba_acpi_pm,
+ toshiba_acpi_suspend, toshiba_acpi_resume);
+
static struct acpi_driver toshiba_acpi_driver = {
.name = "Toshiba ACPI driver",
.owner = THIS_MODULE,
@@ -1328,9 +1330,8 @@
.add = toshiba_acpi_add,
.remove = toshiba_acpi_remove,
.notify = toshiba_acpi_notify,
- .suspend = toshiba_acpi_suspend,
- .resume = toshiba_acpi_resume,
},
+ .drv.pm = &toshiba_acpi_pm,
};
static int __init toshiba_acpi_init(void)
diff --git a/drivers/platform/x86/toshiba_bluetooth.c b/drivers/platform/x86/toshiba_bluetooth.c
index 5fb7186..715a43c 100644
--- a/drivers/platform/x86/toshiba_bluetooth.c
+++ b/drivers/platform/x86/toshiba_bluetooth.c
@@ -34,7 +34,6 @@
static int toshiba_bt_rfkill_add(struct acpi_device *device);
static int toshiba_bt_rfkill_remove(struct acpi_device *device, int type);
static void toshiba_bt_rfkill_notify(struct acpi_device *device, u32 event);
-static int toshiba_bt_resume(struct acpi_device *device);
static const struct acpi_device_id bt_device_ids[] = {
{ "TOS6205", 0},
@@ -42,6 +41,9 @@
};
MODULE_DEVICE_TABLE(acpi, bt_device_ids);
+static int toshiba_bt_resume(struct device *dev);
+static SIMPLE_DEV_PM_OPS(toshiba_bt_pm, NULL, toshiba_bt_resume);
+
static struct acpi_driver toshiba_bt_rfkill_driver = {
.name = "Toshiba BT",
.class = "Toshiba",
@@ -50,9 +52,9 @@
.add = toshiba_bt_rfkill_add,
.remove = toshiba_bt_rfkill_remove,
.notify = toshiba_bt_rfkill_notify,
- .resume = toshiba_bt_resume,
},
.owner = THIS_MODULE,
+ .drv.pm = &toshiba_bt_pm,
};
@@ -88,9 +90,9 @@
toshiba_bluetooth_enable(device->handle);
}
-static int toshiba_bt_resume(struct acpi_device *device)
+static int toshiba_bt_resume(struct device *dev)
{
- return toshiba_bluetooth_enable(device->handle);
+ return toshiba_bluetooth_enable(to_acpi_device(dev)->handle);
}
static int toshiba_bt_rfkill_add(struct acpi_device *device)
diff --git a/drivers/platform/x86/xo15-ebook.c b/drivers/platform/x86/xo15-ebook.c
index fad153d..849c07c 100644
--- a/drivers/platform/x86/xo15-ebook.c
+++ b/drivers/platform/x86/xo15-ebook.c
@@ -77,11 +77,13 @@
}
}
-static int ebook_switch_resume(struct acpi_device *device)
+static int ebook_switch_resume(struct device *dev)
{
- return ebook_send_state(device);
+ return ebook_send_state(to_acpi_device(dev));
}
+static SIMPLE_DEV_PM_OPS(ebook_switch_pm, NULL, ebook_switch_resume);
+
static int ebook_switch_add(struct acpi_device *device)
{
struct ebook_switch *button;
@@ -161,10 +163,10 @@
.ids = ebook_device_ids,
.ops = {
.add = ebook_switch_add,
- .resume = ebook_switch_resume,
.remove = ebook_switch_remove,
.notify = ebook_switch_notify,
},
+ .drv.pm = &ebook_switch_pm,
};
static int __init xo15_ebook_init(void)
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index e3a3b49..70b4a97 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -310,3 +310,5 @@
Say Y to enable battery temperature measurements using
thermistor connected on BATCTRL ADC.
endif # POWER_SUPPLY
+
+source "drivers/power/avs/Kconfig"
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index b6b2434..ee58afb 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -43,4 +43,5 @@
obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o
obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
+obj-$(CONFIG_POWER_AVS) += avs/
obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
diff --git a/drivers/power/avs/Kconfig b/drivers/power/avs/Kconfig
new file mode 100644
index 0000000..2a1008b
--- /dev/null
+++ b/drivers/power/avs/Kconfig
@@ -0,0 +1,12 @@
+menuconfig POWER_AVS
+ bool "Adaptive Voltage Scaling class support"
+ help
+ AVS is a power management technique which finely controls the
+ operating voltage of a device in order to optimize (i.e. reduce)
+ its power consumption.
+ At a given operating point the voltage is adapted depending on
+ static factors (chip manufacturing process) and dynamic factors
+ (temperature depending performance).
+ AVS is also called SmartReflex on OMAP devices.
+
+ Say Y here to enable Adaptive Voltage Scaling class support.
diff --git a/drivers/power/avs/Makefile b/drivers/power/avs/Makefile
new file mode 100644
index 0000000..0843386
--- /dev/null
+++ b/drivers/power/avs/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_POWER_AVS_OMAP) += smartreflex.o
diff --git a/arch/arm/mach-omap2/smartreflex.c b/drivers/power/avs/smartreflex.c
similarity index 89%
rename from arch/arm/mach-omap2/smartreflex.c
rename to drivers/power/avs/smartreflex.c
index 008fbd7..44efc6e 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/drivers/power/avs/smartreflex.c
@@ -3,7 +3,7 @@
*
* Author: Thara Gopinath <thara@ti.com>
*
- * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2012 Texas Instruments, Inc.
* Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2008 Nokia Corporation
@@ -25,39 +25,12 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
-
-#include "common.h"
-
-#include "pm.h"
-#include "smartreflex.h"
+#include <linux/power/smartreflex.h>
#define SMARTREFLEX_NAME_LEN 16
#define NVALUE_NAME_LEN 40
#define SR_DISABLE_TIMEOUT 200
-struct omap_sr {
- struct list_head node;
- struct platform_device *pdev;
- struct omap_sr_nvalue_table *nvalue_table;
- struct voltagedomain *voltdm;
- struct dentry *dbg_dir;
- unsigned int irq;
- int srid;
- int ip_type;
- int nvalue_count;
- bool autocomp_active;
- u32 clk_length;
- u32 err_weight;
- u32 err_minlimit;
- u32 err_maxlimit;
- u32 accum_data;
- u32 senn_avgweight;
- u32 senp_avgweight;
- u32 senp_mod;
- u32 senn_mod;
- void __iomem *base;
-};
-
/* sr_list contains all the instances of smartreflex module */
static LIST_HEAD(sr_list);
@@ -148,7 +121,7 @@
}
if (sr_class->notify)
- sr_class->notify(sr_info->voltdm, status);
+ sr_class->notify(sr_info, status);
return IRQ_HANDLED;
}
@@ -207,7 +180,7 @@
sr->err_weight = OMAP3430_SR_ERRWEIGHT;
sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
sr->accum_data = OMAP3430_SR_ACCUMDATA;
- if (!(strcmp(sr->voltdm->name, "mpu"))) {
+ if (!(strcmp(sr->name, "smartreflex_mpu_iva"))) {
sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
} else {
@@ -226,7 +199,7 @@
return;
}
- if (!sr_class->enable(sr->voltdm))
+ if (!sr_class->enable(sr))
sr->autocomp_active = true;
}
@@ -240,7 +213,7 @@
}
if (sr->autocomp_active) {
- sr_class->disable(sr->voltdm, 1);
+ sr_class->disable(sr, 1);
sr->autocomp_active = false;
}
}
@@ -258,19 +231,13 @@
*/
static int sr_late_init(struct omap_sr *sr_info)
{
- char *name;
struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data;
struct resource *mem;
int ret = 0;
if (sr_class->notify && sr_class->notify_flags && sr_info->irq) {
- name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
- if (name == NULL) {
- ret = -ENOMEM;
- goto error;
- }
ret = request_irq(sr_info->irq, sr_interrupt,
- 0, name, sr_info);
+ 0, sr_info->name, sr_info);
if (ret)
goto error;
disable_irq(sr_info->irq);
@@ -289,7 +256,6 @@
dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
"interrupt handler. Smartreflex will"
"not function as desired\n", __func__);
- kfree(name);
kfree(sr_info);
return ret;
@@ -320,9 +286,9 @@
* Wait for SR to be disabled.
* wait until ERRCONFIG.MCUDISACKINTST = 1. Typical latency is 1us.
*/
- omap_test_timeout((sr_read_reg(sr, ERRCONFIG_V1) &
- ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT,
- timeout);
+ sr_test_cond_timeout((sr_read_reg(sr, ERRCONFIG_V1) &
+ ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT,
+ timeout);
if (timeout >= SR_DISABLE_TIMEOUT)
dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
@@ -365,9 +331,9 @@
* Wait for SR to be disabled.
* wait until IRQSTATUS.MCUDISACKINTST = 1. Typical latency is 1us.
*/
- omap_test_timeout((sr_read_reg(sr, IRQSTATUS) &
- IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT,
- timeout);
+ sr_test_cond_timeout((sr_read_reg(sr, IRQSTATUS) &
+ IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT,
+ timeout);
if (timeout >= SR_DISABLE_TIMEOUT)
dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
@@ -378,22 +344,23 @@
sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT);
}
-static u32 sr_retrieve_nvalue(struct omap_sr *sr, u32 efuse_offs)
+static struct omap_sr_nvalue_table *sr_retrieve_nvalue_row(
+ struct omap_sr *sr, u32 efuse_offs)
{
int i;
if (!sr->nvalue_table) {
dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n",
__func__);
- return 0;
+ return NULL;
}
for (i = 0; i < sr->nvalue_count; i++) {
if (sr->nvalue_table[i].efuse_offs == efuse_offs)
- return sr->nvalue_table[i].nvalue;
+ return &sr->nvalue_table[i];
}
- return 0;
+ return NULL;
}
/* Public Functions */
@@ -419,8 +386,7 @@
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, voltdm->name);
+ pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
return PTR_ERR(sr);
}
@@ -487,8 +453,7 @@
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, voltdm->name);
+ pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
return PTR_ERR(sr);
}
@@ -538,8 +503,7 @@
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, voltdm->name);
+ pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
return PTR_ERR(sr);
}
@@ -620,12 +584,11 @@
{
struct omap_volt_data *volt_data;
struct omap_sr *sr = _sr_lookup(voltdm);
- u32 nvalue_reciprocal;
+ struct omap_sr_nvalue_table *nvalue_row;
int ret;
if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, voltdm->name);
+ pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
return PTR_ERR(sr);
}
@@ -637,16 +600,16 @@
return PTR_ERR(volt_data);
}
- nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs);
+ nvalue_row = sr_retrieve_nvalue_row(sr, volt_data->sr_efuse_offs);
- if (!nvalue_reciprocal) {
- dev_warn(&sr->pdev->dev, "%s: NVALUE = 0 at voltage %ld\n",
- __func__, volt);
+ if (!nvalue_row) {
+ dev_warn(&sr->pdev->dev, "%s: failure getting SR data for this voltage %ld\n",
+ __func__, volt);
return -ENODATA;
}
/* errminlimit is opp dependent and hence linked to voltage */
- sr->err_minlimit = volt_data->sr_errminlimit;
+ sr->err_minlimit = nvalue_row->errminlimit;
pm_runtime_get_sync(&sr->pdev->dev);
@@ -655,11 +618,11 @@
return 0;
/* Configure SR */
- ret = sr_class->configure(voltdm);
+ ret = sr_class->configure(sr);
if (ret)
return ret;
- sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal);
+ sr_write_reg(sr, NVALUERECIPROCAL, nvalue_row->nvalue);
/* SRCONFIG - enable SR */
sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
@@ -678,8 +641,7 @@
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, voltdm->name);
+ pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
return;
}
@@ -759,8 +721,7 @@
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, voltdm->name);
+ pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
return;
}
@@ -773,7 +734,7 @@
return;
}
- sr_class->enable(voltdm);
+ sr_class->enable(sr);
}
/**
@@ -792,8 +753,7 @@
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, voltdm->name);
+ pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
return;
}
@@ -806,7 +766,7 @@
return;
}
- sr_class->disable(voltdm, 0);
+ sr_class->disable(sr, 0);
}
/**
@@ -825,8 +785,7 @@
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, voltdm->name);
+ pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
return;
}
@@ -839,7 +798,7 @@
return;
}
- sr_class->disable(voltdm, 1);
+ sr_class->disable(sr, 1);
}
/**
@@ -911,9 +870,7 @@
struct omap_sr_data *pdata = pdev->dev.platform_data;
struct resource *mem, *irq;
struct dentry *nvalue_dir;
- struct omap_volt_data *volt_data;
int i, ret = 0;
- char *name;
sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
if (!sr_info) {
@@ -950,6 +907,14 @@
pm_runtime_enable(&pdev->dev);
pm_runtime_irq_safe(&pdev->dev);
+ sr_info->name = kasprintf(GFP_KERNEL, "%s", pdata->name);
+ if (!sr_info->name) {
+ dev_err(&pdev->dev, "%s: Unable to alloc SR instance name\n",
+ __func__);
+ ret = -ENOMEM;
+ goto err_release_region;
+ }
+
sr_info->pdev = pdev;
sr_info->srid = pdev->id;
sr_info->voltdm = pdata->voltdm;
@@ -997,20 +962,12 @@
}
}
- name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
- if (!name) {
- dev_err(&pdev->dev, "%s: Unable to alloc debugfs name\n",
- __func__);
- ret = -ENOMEM;
- goto err_iounmap;
- }
- sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir);
- kfree(name);
+ sr_info->dbg_dir = debugfs_create_dir(sr_info->name, sr_dbg_dir);
if (IS_ERR_OR_NULL(sr_info->dbg_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
__func__);
ret = PTR_ERR(sr_info->dbg_dir);
- goto err_iounmap;
+ goto err_free_name;
}
(void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR,
@@ -1019,8 +976,6 @@
&sr_info->err_weight);
(void) debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir,
&sr_info->err_maxlimit);
- (void) debugfs_create_x32("errminlimit", S_IRUGO, sr_info->dbg_dir,
- &sr_info->err_minlimit);
nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir);
if (IS_ERR_OR_NULL(nvalue_dir)) {
@@ -1030,12 +985,10 @@
goto err_debugfs;
}
- omap_voltage_get_volttable(sr_info->voltdm, &volt_data);
- if (!volt_data) {
- dev_warn(&pdev->dev, "%s: No Voltage table for the"
- " corresponding vdd vdd_%s. Cannot create debugfs"
- "entries for n-values\n",
- __func__, sr_info->voltdm->name);
+ if (sr_info->nvalue_count == 0 || !sr_info->nvalue_table) {
+ dev_warn(&pdev->dev, "%s: %s: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values\n",
+ __func__, sr_info->name);
+
ret = -ENODATA;
goto err_debugfs;
}
@@ -1043,16 +996,23 @@
for (i = 0; i < sr_info->nvalue_count; i++) {
char name[NVALUE_NAME_LEN + 1];
- snprintf(name, sizeof(name), "volt_%d",
- volt_data[i].volt_nominal);
+ snprintf(name, sizeof(name), "volt_%lu",
+ sr_info->nvalue_table[i].volt_nominal);
(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
&(sr_info->nvalue_table[i].nvalue));
+ snprintf(name, sizeof(name), "errminlimit_%lu",
+ sr_info->nvalue_table[i].volt_nominal);
+ (void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
+ &(sr_info->nvalue_table[i].errminlimit));
+
}
return ret;
err_debugfs:
debugfs_remove_recursive(sr_info->dbg_dir);
+err_free_name:
+ kfree(sr_info->name);
err_iounmap:
list_del(&sr_info->node);
iounmap(sr_info->base);
@@ -1089,6 +1049,7 @@
list_del(&sr_info->node);
iounmap(sr_info->base);
+ kfree(sr_info->name);
kfree(sr_info);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(mem->start, resource_size(mem));
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index c86b886..f34c3be 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -20,6 +20,7 @@
If unsure, say no.
+
if REGULATOR
config REGULATOR_DEBUG
@@ -88,6 +89,13 @@
If you have a AnalogicTech AAT2870 say Y to enable the
regulator driver.
+config REGULATOR_ARIZONA
+ tristate "Wolfson Arizona class devices"
+ depends on MFD_ARIZONA
+ help
+ Support for the regulators found on Wolfson Arizona class
+ devices.
+
config REGULATOR_DA903X
tristate "Dialog Semiconductor DA9030/DA9034 regulators"
depends on PMIC_DA903X
@@ -195,6 +203,14 @@
via I2C bus. The provided regulator is suitable for S3C6410
and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
+config REGULATOR_MAX77686
+ tristate "Maxim 77686 regulator"
+ depends on MFD_MAX77686
+ help
+ This driver controls a Maxim 77686 regulator
+ via I2C bus. The provided regulator is suitable for
+ Exynos-4 chips to control VARM and VINT voltages.
+
config REGULATOR_PCAP
tristate "Motorola PCAP2 regulator driver"
depends on EZX_PCAP
@@ -216,6 +232,19 @@
Say Y here to support the voltage regulators and convertors
on National Semiconductors LP3972 PMIC
+config REGULATOR_LP872X
+ bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
+ depends on I2C=y
+ select REGMAP_I2C
+ help
+ This driver supports LP8720/LP8725 PMIC
+
+config REGULATOR_LP8788
+ bool "TI LP8788 Power Regulators"
+ depends on MFD_LP8788
+ help
+ This driver supports LP8788 voltage regulator chip.
+
config REGULATOR_PCF50633
tristate "NXP PCF50633 regulator driver"
depends on MFD_PCF50633
@@ -233,6 +262,14 @@
through regulator interface. The device supports multiple DCDC/LDO
outputs which can be controlled by i2c communication.
+config REGULATOR_S2MPS11
+ tristate "Samsung S2MPS11 voltage regulator"
+ depends on MFD_SEC_CORE
+ help
+ This driver supports a Samsung S2MPS11 voltage output regulator
+ via I2C bus. S2MPS11 is comprised of high efficient Buck converters
+ including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
+
config REGULATOR_S5M8767
tristate "Samsung S5M8767A voltage regulator"
depends on MFD_S5M_CORE
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 977fd46..3342615 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -15,6 +15,7 @@
obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
+obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
@@ -23,6 +24,9 @@
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
+obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
+obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
+obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
@@ -30,6 +34,7 @@
obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
+obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
@@ -37,6 +42,7 @@
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
+obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o
diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c
index 06776ca..6f45bfd 100644
--- a/drivers/regulator/aat2870-regulator.c
+++ b/drivers/regulator/aat2870-regulator.c
@@ -33,11 +33,6 @@
struct aat2870_data *aat2870;
struct regulator_desc desc;
- const int *voltages; /* uV */
-
- int min_uV;
- int max_uV;
-
u8 enable_addr;
u8 enable_shift;
u8 enable_mask;
@@ -47,14 +42,6 @@
u8 voltage_mask;
};
-static int aat2870_ldo_list_voltage(struct regulator_dev *rdev,
- unsigned selector)
-{
- struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
-
- return ri->voltages[selector];
-}
-
static int aat2870_ldo_set_voltage_sel(struct regulator_dev *rdev,
unsigned selector)
{
@@ -111,7 +98,7 @@
}
static struct regulator_ops aat2870_ldo_ops = {
- .list_voltage = aat2870_ldo_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.set_voltage_sel = aat2870_ldo_set_voltage_sel,
.get_voltage_sel = aat2870_ldo_get_voltage_sel,
.enable = aat2870_ldo_enable,
@@ -119,7 +106,7 @@
.is_enabled = aat2870_ldo_is_enabled,
};
-static const int aat2870_ldo_voltages[] = {
+static const unsigned int aat2870_ldo_voltages[] = {
1200000, 1300000, 1500000, 1600000,
1800000, 2000000, 2200000, 2500000,
2600000, 2700000, 2800000, 2900000,
@@ -132,13 +119,11 @@
.name = #ids, \
.id = AAT2870_ID_##ids, \
.n_voltages = ARRAY_SIZE(aat2870_ldo_voltages), \
+ .volt_table = aat2870_ldo_voltages, \
.ops = &aat2870_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
}, \
- .voltages = aat2870_ldo_voltages, \
- .min_uV = 1200000, \
- .max_uV = 3300000, \
}
static struct aat2870_regulator aat2870_regulators[] = {
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
index 03f4d9c..182b553 100644
--- a/drivers/regulator/ab3100.c
+++ b/drivers/regulator/ab3100.c
@@ -43,20 +43,12 @@
* @dev: handle to the device
* @plfdata: AB3100 platform data passed in at probe time
* @regreg: regulator register number in the AB3100
- * @fixed_voltage: a fixed voltage for this regulator, if this
- * 0 the voltages array is used instead.
- * @typ_voltages: an array of available typical voltages for
- * this regulator
- * @voltages_len: length of the array of available voltages
*/
struct ab3100_regulator {
struct regulator_dev *rdev;
struct device *dev;
struct ab3100_platform_data *plfdata;
u8 regreg;
- int fixed_voltage;
- int const *typ_voltages;
- u8 voltages_len;
};
/* The order in which registers are initialized */
@@ -80,7 +72,7 @@
#define LDO_C_VOLTAGE 2650000
#define LDO_D_VOLTAGE 2650000
-static const int ldo_e_buck_typ_voltages[] = {
+static const unsigned int ldo_e_buck_typ_voltages[] = {
1800000,
1400000,
1300000,
@@ -90,7 +82,7 @@
900000,
};
-static const int ldo_f_typ_voltages[] = {
+static const unsigned int ldo_f_typ_voltages[] = {
1800000,
1400000,
1300000,
@@ -101,21 +93,21 @@
2650000,
};
-static const int ldo_g_typ_voltages[] = {
+static const unsigned int ldo_g_typ_voltages[] = {
2850000,
2750000,
1800000,
1500000,
};
-static const int ldo_h_typ_voltages[] = {
+static const unsigned int ldo_h_typ_voltages[] = {
2750000,
1800000,
1500000,
1200000,
};
-static const int ldo_k_typ_voltages[] = {
+static const unsigned int ldo_k_typ_voltages[] = {
2750000,
1800000,
};
@@ -126,40 +118,27 @@
ab3100_regulators[AB3100_NUM_REGULATORS] = {
{
.regreg = AB3100_LDO_A,
- .fixed_voltage = LDO_A_VOLTAGE,
},
{
.regreg = AB3100_LDO_C,
- .fixed_voltage = LDO_C_VOLTAGE,
},
{
.regreg = AB3100_LDO_D,
- .fixed_voltage = LDO_D_VOLTAGE,
},
{
.regreg = AB3100_LDO_E,
- .typ_voltages = ldo_e_buck_typ_voltages,
- .voltages_len = ARRAY_SIZE(ldo_e_buck_typ_voltages),
},
{
.regreg = AB3100_LDO_F,
- .typ_voltages = ldo_f_typ_voltages,
- .voltages_len = ARRAY_SIZE(ldo_f_typ_voltages),
},
{
.regreg = AB3100_LDO_G,
- .typ_voltages = ldo_g_typ_voltages,
- .voltages_len = ARRAY_SIZE(ldo_g_typ_voltages),
},
{
.regreg = AB3100_LDO_H,
- .typ_voltages = ldo_h_typ_voltages,
- .voltages_len = ARRAY_SIZE(ldo_h_typ_voltages),
},
{
.regreg = AB3100_LDO_K,
- .typ_voltages = ldo_k_typ_voltages,
- .voltages_len = ARRAY_SIZE(ldo_k_typ_voltages),
},
{
.regreg = AB3100_LDO_EXT,
@@ -167,8 +146,6 @@
},
{
.regreg = AB3100_BUCK,
- .typ_voltages = ldo_e_buck_typ_voltages,
- .voltages_len = ARRAY_SIZE(ldo_e_buck_typ_voltages),
},
};
@@ -178,7 +155,7 @@
*/
static int ab3100_enable_regulator(struct regulator_dev *reg)
{
- struct ab3100_regulator *abreg = reg->reg_data;
+ struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
int err;
u8 regval;
@@ -209,7 +186,7 @@
static int ab3100_disable_regulator(struct regulator_dev *reg)
{
- struct ab3100_regulator *abreg = reg->reg_data;
+ struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
int err;
u8 regval;
@@ -242,7 +219,7 @@
static int ab3100_is_enabled_regulator(struct regulator_dev *reg)
{
- struct ab3100_regulator *abreg = reg->reg_data;
+ struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
u8 regval;
int err;
@@ -257,26 +234,12 @@
return regval & AB3100_REG_ON_MASK;
}
-static int ab3100_list_voltage_regulator(struct regulator_dev *reg,
- unsigned selector)
-{
- struct ab3100_regulator *abreg = reg->reg_data;
-
- if (selector >= abreg->voltages_len)
- return -EINVAL;
- return abreg->typ_voltages[selector];
-}
-
static int ab3100_get_voltage_regulator(struct regulator_dev *reg)
{
- struct ab3100_regulator *abreg = reg->reg_data;
+ struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
u8 regval;
int err;
- /* Return the voltage for fixed regulators immediately */
- if (abreg->fixed_voltage)
- return abreg->fixed_voltage;
-
/*
* For variable types, read out setting and index into
* supplied voltage list.
@@ -294,20 +257,20 @@
regval &= 0xE0;
regval >>= 5;
- if (regval >= abreg->voltages_len) {
+ if (regval >= reg->desc->n_voltages) {
dev_err(®->dev,
"regulator register %02x contains an illegal voltage setting\n",
abreg->regreg);
return -EINVAL;
}
- return abreg->typ_voltages[regval];
+ return reg->desc->volt_table[regval];
}
static int ab3100_set_voltage_regulator_sel(struct regulator_dev *reg,
unsigned selector)
{
- struct ab3100_regulator *abreg = reg->reg_data;
+ struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
u8 regval;
int err;
@@ -336,7 +299,7 @@
static int ab3100_set_suspend_voltage_regulator(struct regulator_dev *reg,
int uV)
{
- struct ab3100_regulator *abreg = reg->reg_data;
+ struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
u8 regval;
int err;
int bestindex;
@@ -379,42 +342,22 @@
*/
static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
{
- struct ab3100_regulator *abreg = reg->reg_data;
+ struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
return abreg->plfdata->external_voltage;
}
-static int ab3100_enable_time_regulator(struct regulator_dev *reg)
+static int ab3100_get_fixed_voltage_regulator(struct regulator_dev *reg)
{
- struct ab3100_regulator *abreg = reg->reg_data;
-
- /* Per-regulator power on delay from spec */
- switch (abreg->regreg) {
- case AB3100_LDO_A: /* Fallthrough */
- case AB3100_LDO_C: /* Fallthrough */
- case AB3100_LDO_D: /* Fallthrough */
- case AB3100_LDO_E: /* Fallthrough */
- case AB3100_LDO_H: /* Fallthrough */
- case AB3100_LDO_K:
- return 200;
- case AB3100_LDO_F:
- return 600;
- case AB3100_LDO_G:
- return 400;
- case AB3100_BUCK:
- return 1000;
- default:
- break;
- }
- return 0;
+ return reg->desc->min_uV;
}
static struct regulator_ops regulator_ops_fixed = {
+ .list_voltage = regulator_list_voltage_linear,
.enable = ab3100_enable_regulator,
.disable = ab3100_disable_regulator,
.is_enabled = ab3100_is_enabled_regulator,
- .get_voltage = ab3100_get_voltage_regulator,
- .enable_time = ab3100_enable_time_regulator,
+ .get_voltage = ab3100_get_fixed_voltage_regulator,
};
static struct regulator_ops regulator_ops_variable = {
@@ -423,8 +366,7 @@
.is_enabled = ab3100_is_enabled_regulator,
.get_voltage = ab3100_get_voltage_regulator,
.set_voltage_sel = ab3100_set_voltage_regulator_sel,
- .list_voltage = ab3100_list_voltage_regulator,
- .enable_time = ab3100_enable_time_regulator,
+ .list_voltage = regulator_list_voltage_table,
};
static struct regulator_ops regulator_ops_variable_sleepable = {
@@ -434,8 +376,7 @@
.get_voltage = ab3100_get_voltage_regulator,
.set_voltage_sel = ab3100_set_voltage_regulator_sel,
.set_suspend_voltage = ab3100_set_suspend_voltage_regulator,
- .list_voltage = ab3100_list_voltage_regulator,
- .enable_time = ab3100_enable_time_regulator,
+ .list_voltage = regulator_list_voltage_table,
};
/*
@@ -457,62 +398,81 @@
.name = "LDO_A",
.id = AB3100_LDO_A,
.ops = ®ulator_ops_fixed,
+ .n_voltages = 1,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .min_uV = LDO_A_VOLTAGE,
+ .enable_time = 200,
},
{
.name = "LDO_C",
.id = AB3100_LDO_C,
.ops = ®ulator_ops_fixed,
+ .n_voltages = 1,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .min_uV = LDO_C_VOLTAGE,
+ .enable_time = 200,
},
{
.name = "LDO_D",
.id = AB3100_LDO_D,
.ops = ®ulator_ops_fixed,
+ .n_voltages = 1,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .min_uV = LDO_D_VOLTAGE,
+ .enable_time = 200,
},
{
.name = "LDO_E",
.id = AB3100_LDO_E,
.ops = ®ulator_ops_variable_sleepable,
.n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
+ .volt_table = ldo_e_buck_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .enable_time = 200,
},
{
.name = "LDO_F",
.id = AB3100_LDO_F,
.ops = ®ulator_ops_variable,
.n_voltages = ARRAY_SIZE(ldo_f_typ_voltages),
+ .volt_table = ldo_f_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .enable_time = 600,
},
{
.name = "LDO_G",
.id = AB3100_LDO_G,
.ops = ®ulator_ops_variable,
.n_voltages = ARRAY_SIZE(ldo_g_typ_voltages),
+ .volt_table = ldo_g_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .enable_time = 400,
},
{
.name = "LDO_H",
.id = AB3100_LDO_H,
.ops = ®ulator_ops_variable,
.n_voltages = ARRAY_SIZE(ldo_h_typ_voltages),
+ .volt_table = ldo_h_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .enable_time = 200,
},
{
.name = "LDO_K",
.id = AB3100_LDO_K,
.ops = ®ulator_ops_variable,
.n_voltages = ARRAY_SIZE(ldo_k_typ_voltages),
+ .volt_table = ldo_k_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .enable_time = 200,
},
{
.name = "LDO_EXT",
@@ -528,6 +488,7 @@
.n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .enable_time = 1000,
},
};
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index e1b8c54..13d424f 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -30,9 +30,6 @@
* @dev: device pointer
* @desc: regulator description
* @regulator_dev: regulator device
- * @max_uV: maximum voltage (for variable voltage supplies)
- * @min_uV: minimum voltage (for variable voltage supplies)
- * @fixed_uV: typical voltage (for fixed voltage supplies)
* @update_bank: bank to control on/off
* @update_reg: register to control on/off
* @update_mask: mask to enable/disable regulator
@@ -40,17 +37,12 @@
* @voltage_bank: bank to control regulator voltage
* @voltage_reg: register to control regulator voltage
* @voltage_mask: mask to control regulator voltage
- * @voltages: supported voltage table
- * @voltages_len: number of supported voltages for the regulator
* @delay: startup/set voltage delay in us
*/
struct ab8500_regulator_info {
struct device *dev;
struct regulator_desc desc;
struct regulator_dev *regulator;
- int max_uV;
- int min_uV;
- int fixed_uV;
u8 update_bank;
u8 update_reg;
u8 update_mask;
@@ -58,13 +50,11 @@
u8 voltage_bank;
u8 voltage_reg;
u8 voltage_mask;
- int const *voltages;
- int voltages_len;
unsigned int delay;
};
/* voltage tables for the vauxn/vintcore supplies */
-static const int ldo_vauxn_voltages[] = {
+static const unsigned int ldo_vauxn_voltages[] = {
1100000,
1200000,
1300000,
@@ -83,7 +73,7 @@
3300000,
};
-static const int ldo_vaux3_voltages[] = {
+static const unsigned int ldo_vaux3_voltages[] = {
1200000,
1500000,
1800000,
@@ -94,7 +84,7 @@
2910000,
};
-static const int ldo_vintcore_voltages[] = {
+static const unsigned int ldo_vintcore_voltages[] = {
1200000,
1225000,
1250000,
@@ -185,25 +175,6 @@
return false;
}
-static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
-{
- struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
-
- if (info == NULL) {
- dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
- return -EINVAL;
- }
-
- /* return the uV for the fixed regulators */
- if (info->fixed_uV)
- return info->fixed_uV;
-
- if (selector >= info->voltages_len)
- return -EINVAL;
-
- return info->voltages[selector];
-}
-
static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
{
int ret, val;
@@ -279,14 +250,7 @@
unsigned int new_sel)
{
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
- int ret;
- /* If the regulator isn't on, it won't take time here */
- ret = ab8500_regulator_is_enabled(rdev);
- if (ret < 0)
- return ret;
- if (!ret)
- return 0;
return info->delay;
}
@@ -296,21 +260,14 @@
.is_enabled = ab8500_regulator_is_enabled,
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
.set_voltage_sel = ab8500_regulator_set_voltage_sel,
- .list_voltage = ab8500_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.enable_time = ab8500_regulator_enable_time,
.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
};
static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
{
- struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
-
- if (info == NULL) {
- dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
- return -EINVAL;
- }
-
- return info->fixed_uV;
+ return rdev->desc->min_uV;
}
static struct regulator_ops ab8500_regulator_fixed_ops = {
@@ -318,9 +275,8 @@
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
.get_voltage = ab8500_fixed_get_voltage,
- .list_voltage = ab8500_list_voltage,
+ .list_voltage = regulator_list_voltage_linear,
.enable_time = ab8500_regulator_enable_time,
- .set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
};
static struct ab8500_regulator_info
@@ -329,7 +285,7 @@
* Variable Voltage Regulators
* name, min mV, max mV,
* update bank, reg, mask, enable val
- * volt bank, reg, mask, table, table length
+ * volt bank, reg, mask
*/
[AB8500_LDO_AUX1] = {
.desc = {
@@ -339,9 +295,8 @@
.id = AB8500_LDO_AUX1,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ .volt_table = ldo_vauxn_voltages,
},
- .min_uV = 1100000,
- .max_uV = 3300000,
.update_bank = 0x04,
.update_reg = 0x09,
.update_mask = 0x03,
@@ -349,8 +304,6 @@
.voltage_bank = 0x04,
.voltage_reg = 0x1f,
.voltage_mask = 0x0f,
- .voltages = ldo_vauxn_voltages,
- .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
},
[AB8500_LDO_AUX2] = {
.desc = {
@@ -360,9 +313,8 @@
.id = AB8500_LDO_AUX2,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ .volt_table = ldo_vauxn_voltages,
},
- .min_uV = 1100000,
- .max_uV = 3300000,
.update_bank = 0x04,
.update_reg = 0x09,
.update_mask = 0x0c,
@@ -370,8 +322,6 @@
.voltage_bank = 0x04,
.voltage_reg = 0x20,
.voltage_mask = 0x0f,
- .voltages = ldo_vauxn_voltages,
- .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
},
[AB8500_LDO_AUX3] = {
.desc = {
@@ -381,9 +331,8 @@
.id = AB8500_LDO_AUX3,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
+ .volt_table = ldo_vaux3_voltages,
},
- .min_uV = 1100000,
- .max_uV = 3300000,
.update_bank = 0x04,
.update_reg = 0x0a,
.update_mask = 0x03,
@@ -391,8 +340,6 @@
.voltage_bank = 0x04,
.voltage_reg = 0x21,
.voltage_mask = 0x07,
- .voltages = ldo_vaux3_voltages,
- .voltages_len = ARRAY_SIZE(ldo_vaux3_voltages),
},
[AB8500_LDO_INTCORE] = {
.desc = {
@@ -402,9 +349,8 @@
.id = AB8500_LDO_INTCORE,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
+ .volt_table = ldo_vintcore_voltages,
},
- .min_uV = 1100000,
- .max_uV = 3300000,
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x44,
@@ -412,8 +358,6 @@
.voltage_bank = 0x03,
.voltage_reg = 0x80,
.voltage_mask = 0x38,
- .voltages = ldo_vintcore_voltages,
- .voltages_len = ARRAY_SIZE(ldo_vintcore_voltages),
},
/*
@@ -429,9 +373,9 @@
.id = AB8500_LDO_TVOUT,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .min_uV = 2000000,
},
.delay = 10000,
- .fixed_uV = 2000000,
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x82,
@@ -445,8 +389,8 @@
.id = AB8500_LDO_USB,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .min_uV = 3300000,
},
- .fixed_uV = 3300000,
.update_bank = 0x03,
.update_reg = 0x82,
.update_mask = 0x03,
@@ -460,8 +404,8 @@
.id = AB8500_LDO_AUDIO,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .min_uV = 2000000,
},
- .fixed_uV = 2000000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x02,
@@ -475,8 +419,8 @@
.id = AB8500_LDO_ANAMIC1,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .min_uV = 2050000,
},
- .fixed_uV = 2050000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x08,
@@ -490,8 +434,8 @@
.id = AB8500_LDO_ANAMIC2,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .min_uV = 2050000,
},
- .fixed_uV = 2050000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x10,
@@ -505,8 +449,8 @@
.id = AB8500_LDO_DMIC,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .min_uV = 1800000,
},
- .fixed_uV = 1800000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x04,
@@ -520,8 +464,8 @@
.id = AB8500_LDO_ANA,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .min_uV = 1200000,
},
- .fixed_uV = 1200000,
.update_bank = 0x04,
.update_reg = 0x06,
.update_mask = 0x0c,
@@ -769,9 +713,7 @@
if (info->desc.id == AB8500_LDO_AUX3) {
info->desc.n_voltages =
ARRAY_SIZE(ldo_vauxn_voltages);
- info->voltages = ldo_vauxn_voltages;
- info->voltages_len =
- ARRAY_SIZE(ldo_vauxn_voltages);
+ info->desc.volt_table = ldo_vauxn_voltages;
info->voltage_mask = 0xf;
}
}
@@ -794,17 +736,17 @@
}
static struct of_regulator_match ab8500_regulator_matches[] = {
- { .name = "LDO-AUX1", .driver_data = (void *) AB8500_LDO_AUX1, },
- { .name = "LDO-AUX2", .driver_data = (void *) AB8500_LDO_AUX2, },
- { .name = "LDO-AUX3", .driver_data = (void *) AB8500_LDO_AUX3, },
- { .name = "LDO-INTCORE", .driver_data = (void *) AB8500_LDO_INTCORE, },
- { .name = "LDO-TVOUT", .driver_data = (void *) AB8500_LDO_TVOUT, },
- { .name = "LDO-USB", .driver_data = (void *) AB8500_LDO_USB, },
- { .name = "LDO-AUDIO", .driver_data = (void *) AB8500_LDO_AUDIO, },
- { .name = "LDO-ANAMIC1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
- { .name = "LDO-ANAMIC2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
- { .name = "LDO-DMIC", .driver_data = (void *) AB8500_LDO_DMIC, },
- { .name = "LDO-ANA", .driver_data = (void *) AB8500_LDO_ANA, },
+ { .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8500_LDO_AUX1, },
+ { .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8500_LDO_AUX2, },
+ { .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8500_LDO_AUX3, },
+ { .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, },
+ { .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8500_LDO_TVOUT, },
+ { .name = "ab8500_ldo_usb", .driver_data = (void *) AB8500_LDO_USB, },
+ { .name = "ab8500_ldo_audio", .driver_data = (void *) AB8500_LDO_AUDIO, },
+ { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
+ { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
+ { .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8500_LDO_DMIC, },
+ { .name = "ab8500_ldo_ana", .driver_data = (void *) AB8500_LDO_ANA, },
};
static __devinit int
diff --git a/drivers/regulator/ad5398.c b/drivers/regulator/ad5398.c
index 46d05f3..f123f7e 100644
--- a/drivers/regulator/ad5398.c
+++ b/drivers/regulator/ad5398.c
@@ -89,9 +89,12 @@
unsigned short data;
int ret;
- if (min_uA > chip->max_uA || min_uA < chip->min_uA)
- return -EINVAL;
- if (max_uA > chip->max_uA || max_uA < chip->min_uA)
+ if (min_uA < chip->min_uA)
+ min_uA = chip->min_uA;
+ if (max_uA > chip->max_uA)
+ max_uA = chip->max_uA;
+
+ if (min_uA > chip->max_uA || max_uA < chip->min_uA)
return -EINVAL;
selector = DIV_ROUND_UP((min_uA - chip->min_uA) * chip->current_level,
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 3660bac..e9c2085 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -43,33 +43,15 @@
struct regulator_init_data *initdata;
};
-static int anatop_set_voltage(struct regulator_dev *reg, int min_uV,
- int max_uV, unsigned *selector)
+static int anatop_set_voltage_sel(struct regulator_dev *reg, unsigned selector)
{
struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
- u32 val, sel, mask;
- int uv;
-
- uv = min_uV;
- dev_dbg(®->dev, "%s: uv %d, min %d, max %d\n", __func__,
- uv, anatop_reg->min_voltage,
- anatop_reg->max_voltage);
-
- if (uv < anatop_reg->min_voltage) {
- if (max_uV > anatop_reg->min_voltage)
- uv = anatop_reg->min_voltage;
- else
- return -EINVAL;
- }
+ u32 val, mask;
if (!anatop_reg->control_reg)
return -ENOTSUPP;
- sel = DIV_ROUND_UP(uv - anatop_reg->min_voltage, 25000);
- if (sel * 25000 + anatop_reg->min_voltage > anatop_reg->max_voltage)
- return -EINVAL;
- val = anatop_reg->min_bit_val + sel;
- *selector = sel;
+ val = anatop_reg->min_bit_val + selector;
dev_dbg(®->dev, "%s: calculated val %d\n", __func__, val);
mask = ((1 << anatop_reg->vol_bit_width) - 1) <<
anatop_reg->vol_bit_shift;
@@ -94,21 +76,11 @@
return val - anatop_reg->min_bit_val;
}
-static int anatop_list_voltage(struct regulator_dev *reg, unsigned selector)
-{
- struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
- int uv;
-
- uv = anatop_reg->min_voltage + selector * 25000;
- dev_dbg(®->dev, "vddio = %d, selector = %u\n", uv, selector);
-
- return uv;
-}
-
static struct regulator_ops anatop_rops = {
- .set_voltage = anatop_set_voltage,
+ .set_voltage_sel = anatop_set_voltage_sel,
.get_voltage_sel = anatop_get_voltage_sel,
- .list_voltage = anatop_list_voltage,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
};
static int __devinit anatop_regulator_probe(struct platform_device *pdev)
@@ -176,6 +148,8 @@
rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage)
/ 25000 + 1;
+ rdesc->min_uV = sreg->min_voltage;
+ rdesc->uV_step = 25000;
config.dev = &pdev->dev;
config.init_data = initdata;
@@ -224,7 +198,7 @@
.of_match_table = of_anatop_regulator_match_tbl,
},
.probe = anatop_regulator_probe,
- .remove = anatop_regulator_remove,
+ .remove = __devexit_p(anatop_regulator_remove),
};
static int __init anatop_regulator_init(void)
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
new file mode 100644
index 0000000..c8f95c0
--- /dev/null
+++ b/drivers/regulator/arizona-ldo1.c
@@ -0,0 +1,138 @@
+/*
+ * arizona-ldo1.c -- LDO1 supply for Arizona devices
+ *
+ * Copyright 2012 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/arizona/core.h>
+#include <linux/mfd/arizona/pdata.h>
+#include <linux/mfd/arizona/registers.h>
+
+struct arizona_ldo1 {
+ struct regulator_dev *regulator;
+ struct arizona *arizona;
+
+ struct regulator_consumer_supply supply;
+ struct regulator_init_data init_data;
+};
+
+static struct regulator_ops arizona_ldo1_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_desc arizona_ldo1 = {
+ .name = "LDO1",
+ .supply_name = "LDOVDD",
+ .type = REGULATOR_VOLTAGE,
+ .ops = &arizona_ldo1_ops,
+
+ .vsel_reg = ARIZONA_LDO1_CONTROL_1,
+ .vsel_mask = ARIZONA_LDO1_VSEL_MASK,
+ .min_uV = 900000,
+ .uV_step = 50000,
+ .n_voltages = 7,
+
+ .owner = THIS_MODULE,
+};
+
+static const struct regulator_init_data arizona_ldo1_default = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+};
+
+static __devinit int arizona_ldo1_probe(struct platform_device *pdev)
+{
+ struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+ struct regulator_config config = { };
+ struct arizona_ldo1 *ldo1;
+ int ret;
+
+ ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL);
+ if (ldo1 == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ ldo1->arizona = arizona;
+
+ /*
+ * Since the chip usually supplies itself we provide some
+ * default init_data for it. This will be overridden with
+ * platform data if provided.
+ */
+ ldo1->init_data = arizona_ldo1_default;
+ ldo1->init_data.consumer_supplies = &ldo1->supply;
+ ldo1->supply.supply = "DCVDD";
+ ldo1->supply.dev_name = dev_name(arizona->dev);
+
+ config.dev = arizona->dev;
+ config.driver_data = ldo1;
+ config.regmap = arizona->regmap;
+ config.ena_gpio = arizona->pdata.ldoena;
+
+ if (arizona->pdata.ldo1)
+ config.init_data = arizona->pdata.ldo1;
+ else
+ config.init_data = &ldo1->init_data;
+
+ ldo1->regulator = regulator_register(&arizona_ldo1, &config);
+ if (IS_ERR(ldo1->regulator)) {
+ ret = PTR_ERR(ldo1->regulator);
+ dev_err(arizona->dev, "Failed to register LDO1 supply: %d\n",
+ ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, ldo1);
+
+ return 0;
+}
+
+static __devexit int arizona_ldo1_remove(struct platform_device *pdev)
+{
+ struct arizona_ldo1 *ldo1 = platform_get_drvdata(pdev);
+
+ regulator_unregister(ldo1->regulator);
+
+ return 0;
+}
+
+static struct platform_driver arizona_ldo1_driver = {
+ .probe = arizona_ldo1_probe,
+ .remove = __devexit_p(arizona_ldo1_remove),
+ .driver = {
+ .name = "arizona-ldo1",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(arizona_ldo1_driver);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("Arizona LDO1 driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:arizona-ldo1");
diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c
new file mode 100644
index 0000000..450a069
--- /dev/null
+++ b/drivers/regulator/arizona-micsupp.c
@@ -0,0 +1,188 @@
+/*
+ * arizona-micsupp.c -- Microphone supply for Arizona devices
+ *
+ * Copyright 2012 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/arizona/core.h>
+#include <linux/mfd/arizona/pdata.h>
+#include <linux/mfd/arizona/registers.h>
+
+#define ARIZONA_MICSUPP_MAX_SELECTOR 0x1f
+
+struct arizona_micsupp {
+ struct regulator_dev *regulator;
+ struct arizona *arizona;
+
+ struct regulator_consumer_supply supply;
+ struct regulator_init_data init_data;
+};
+
+static int arizona_micsupp_list_voltage(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ if (selector > ARIZONA_MICSUPP_MAX_SELECTOR)
+ return -EINVAL;
+
+ if (selector == ARIZONA_MICSUPP_MAX_SELECTOR)
+ return 3300000;
+ else
+ return (selector * 50000) + 1700000;
+}
+
+static int arizona_micsupp_map_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ unsigned int voltage;
+ int selector;
+
+ if (min_uV < 1700000)
+ min_uV = 1700000;
+
+ if (min_uV > 3200000)
+ selector = ARIZONA_MICSUPP_MAX_SELECTOR;
+ else
+ selector = DIV_ROUND_UP(min_uV - 1700000, 50000);
+
+ if (selector < 0)
+ return -EINVAL;
+
+ voltage = arizona_micsupp_list_voltage(rdev, selector);
+ if (voltage < min_uV || voltage > max_uV)
+ return -EINVAL;
+
+ return selector;
+}
+
+static struct regulator_ops arizona_micsupp_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+
+ .list_voltage = arizona_micsupp_list_voltage,
+ .map_voltage = arizona_micsupp_map_voltage,
+
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_desc arizona_micsupp = {
+ .name = "MICVDD",
+ .supply_name = "CPVDD",
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = ARIZONA_MICSUPP_MAX_SELECTOR + 1,
+ .ops = &arizona_micsupp_ops,
+
+ .vsel_reg = ARIZONA_LDO2_CONTROL_1,
+ .vsel_mask = ARIZONA_LDO2_VSEL_MASK,
+ .enable_reg = ARIZONA_MIC_CHARGE_PUMP_1,
+ .enable_mask = ARIZONA_CPMIC_ENA,
+
+ .owner = THIS_MODULE,
+};
+
+static const struct regulator_init_data arizona_micsupp_default = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_VOLTAGE,
+ .min_uV = 1700000,
+ .max_uV = 3300000,
+ },
+
+ .num_consumer_supplies = 1,
+};
+
+static __devinit int arizona_micsupp_probe(struct platform_device *pdev)
+{
+ struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+ struct regulator_config config = { };
+ struct arizona_micsupp *micsupp;
+ int ret;
+
+ micsupp = devm_kzalloc(&pdev->dev, sizeof(*micsupp), GFP_KERNEL);
+ if (micsupp == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ micsupp->arizona = arizona;
+
+ /*
+ * Since the chip usually supplies itself we provide some
+ * default init_data for it. This will be overridden with
+ * platform data if provided.
+ */
+ micsupp->init_data = arizona_micsupp_default;
+ micsupp->init_data.consumer_supplies = &micsupp->supply;
+ micsupp->supply.supply = "MICVDD";
+ micsupp->supply.dev_name = dev_name(arizona->dev);
+
+ config.dev = arizona->dev;
+ config.driver_data = micsupp;
+ config.regmap = arizona->regmap;
+
+ if (arizona->pdata.micvdd)
+ config.init_data = arizona->pdata.micvdd;
+ else
+ config.init_data = &micsupp->init_data;
+
+ /* Default to regulated mode until the API supports bypass */
+ regmap_update_bits(arizona->regmap, ARIZONA_MIC_CHARGE_PUMP_1,
+ ARIZONA_CPMIC_BYPASS, 0);
+
+ micsupp->regulator = regulator_register(&arizona_micsupp, &config);
+ if (IS_ERR(micsupp->regulator)) {
+ ret = PTR_ERR(micsupp->regulator);
+ dev_err(arizona->dev, "Failed to register mic supply: %d\n",
+ ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, micsupp);
+
+ return 0;
+}
+
+static __devexit int arizona_micsupp_remove(struct platform_device *pdev)
+{
+ struct arizona_micsupp *micsupp = platform_get_drvdata(pdev);
+
+ regulator_unregister(micsupp->regulator);
+
+ return 0;
+}
+
+static struct platform_driver arizona_micsupp_driver = {
+ .probe = arizona_micsupp_probe,
+ .remove = __devexit_p(arizona_micsupp_remove),
+ .driver = {
+ .name = "arizona-micsupp",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(arizona_micsupp_driver);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("Arizona microphone supply driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:arizona-micsupp");
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 7584a74..2e31dff 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -23,6 +23,7 @@
#include <linux/mutex.h>
#include <linux/suspend.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/regulator/of_regulator.h>
@@ -108,28 +109,6 @@
return "";
}
-/* gets the regulator for a given consumer device */
-static struct regulator *get_device_regulator(struct device *dev)
-{
- struct regulator *regulator = NULL;
- struct regulator_dev *rdev;
-
- mutex_lock(®ulator_list_mutex);
- list_for_each_entry(rdev, ®ulator_list, list) {
- mutex_lock(&rdev->mutex);
- list_for_each_entry(regulator, &rdev->consumer_list, list) {
- if (regulator->dev == dev) {
- mutex_unlock(&rdev->mutex);
- mutex_unlock(®ulator_list_mutex);
- return regulator;
- }
- }
- mutex_unlock(&rdev->mutex);
- }
- mutex_unlock(®ulator_list_mutex);
- return NULL;
-}
-
/**
* of_get_regulator - get a regulator device node based on supply name
* @dev: Device pointer for the consumer (of regulator) device
@@ -303,18 +282,6 @@
return 0;
}
-static ssize_t device_requested_uA_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct regulator *regulator;
-
- regulator = get_device_regulator(dev);
- if (regulator == NULL)
- return 0;
-
- return sprintf(buf, "%d\n", regulator->uA_load);
-}
-
static ssize_t regulator_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -427,6 +394,9 @@
case REGULATOR_STATUS_STANDBY:
label = "standby";
break;
+ case REGULATOR_STATUS_UNDEFINED:
+ label = "undefined";
+ break;
default:
return -ERANGE;
}
@@ -967,6 +937,14 @@
}
}
+ if (rdev->constraints->ramp_delay && ops->set_ramp_delay) {
+ ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay);
+ if (ret < 0) {
+ rdev_err(rdev, "failed to set ramp_delay\n");
+ goto out;
+ }
+ }
+
print_constraints(rdev);
return 0;
out:
@@ -1097,48 +1075,29 @@
list_add(®ulator->list, &rdev->consumer_list);
if (dev) {
- /* create a 'requested_microamps_name' sysfs entry */
- size = scnprintf(buf, REG_STR_SIZE,
- "microamps_requested_%s-%s",
- dev_name(dev), supply_name);
- if (size >= REG_STR_SIZE)
- goto overflow_err;
-
regulator->dev = dev;
- sysfs_attr_init(®ulator->dev_attr.attr);
- regulator->dev_attr.attr.name = kstrdup(buf, GFP_KERNEL);
- if (regulator->dev_attr.attr.name == NULL)
- goto attr_name_err;
- regulator->dev_attr.attr.mode = 0444;
- regulator->dev_attr.show = device_requested_uA_show;
- err = device_create_file(dev, ®ulator->dev_attr);
- if (err < 0) {
- rdev_warn(rdev, "could not add regulator_dev requested microamps sysfs entry\n");
- goto attr_name_err;
- }
-
- /* also add a link to the device sysfs entry */
+ /* Add a link to the device sysfs entry */
size = scnprintf(buf, REG_STR_SIZE, "%s-%s",
dev->kobj.name, supply_name);
if (size >= REG_STR_SIZE)
- goto attr_err;
+ goto overflow_err;
regulator->supply_name = kstrdup(buf, GFP_KERNEL);
if (regulator->supply_name == NULL)
- goto attr_err;
+ goto overflow_err;
err = sysfs_create_link(&rdev->dev.kobj, &dev->kobj,
buf);
if (err) {
rdev_warn(rdev, "could not add device link %s err %d\n",
dev->kobj.name, err);
- goto link_name_err;
+ /* non-fatal */
}
} else {
regulator->supply_name = kstrdup(supply_name, GFP_KERNEL);
if (regulator->supply_name == NULL)
- goto attr_err;
+ goto overflow_err;
}
regulator->debugfs = debugfs_create_dir(regulator->supply_name,
@@ -1165,12 +1124,6 @@
mutex_unlock(&rdev->mutex);
return regulator;
-link_name_err:
- kfree(regulator->supply_name);
-attr_err:
- device_remove_file(regulator->dev, ®ulator->dev_attr);
-attr_name_err:
- kfree(regulator->dev_attr.attr.name);
overflow_err:
list_del(®ulator->list);
kfree(regulator);
@@ -1181,7 +1134,7 @@
static int _regulator_get_enable_time(struct regulator_dev *rdev)
{
if (!rdev->desc->ops->enable_time)
- return 0;
+ return rdev->desc->enable_time;
return rdev->desc->ops->enable_time(rdev);
}
@@ -1420,11 +1373,8 @@
debugfs_remove_recursive(regulator->debugfs);
/* remove any sysfs entries */
- if (regulator->dev) {
+ if (regulator->dev)
sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
- device_remove_file(regulator->dev, ®ulator->dev_attr);
- kfree(regulator->dev_attr.attr.name);
- }
kfree(regulator->supply_name);
list_del(®ulator->list);
kfree(regulator);
@@ -1459,19 +1409,61 @@
{
int rc;
- rc = devres_destroy(regulator->dev, devm_regulator_release,
+ rc = devres_release(regulator->dev, devm_regulator_release,
devm_regulator_match, regulator);
- if (rc == 0)
- regulator_put(regulator);
- else
+ if (rc != 0)
WARN_ON(rc);
}
EXPORT_SYMBOL_GPL(devm_regulator_put);
+static int _regulator_do_enable(struct regulator_dev *rdev)
+{
+ int ret, delay;
+
+ /* Query before enabling in case configuration dependent. */
+ ret = _regulator_get_enable_time(rdev);
+ if (ret >= 0) {
+ delay = ret;
+ } else {
+ rdev_warn(rdev, "enable_time() failed: %d\n", ret);
+ delay = 0;
+ }
+
+ trace_regulator_enable(rdev_get_name(rdev));
+
+ if (rdev->ena_gpio) {
+ gpio_set_value_cansleep(rdev->ena_gpio,
+ !rdev->ena_gpio_invert);
+ rdev->ena_gpio_state = 1;
+ } else if (rdev->desc->ops->enable) {
+ ret = rdev->desc->ops->enable(rdev);
+ if (ret < 0)
+ return ret;
+ } else {
+ return -EINVAL;
+ }
+
+ /* Allow the regulator to ramp; it would be useful to extend
+ * this for bulk operations so that the regulators can ramp
+ * together. */
+ trace_regulator_enable_delay(rdev_get_name(rdev));
+
+ if (delay >= 1000) {
+ mdelay(delay / 1000);
+ udelay(delay % 1000);
+ } else if (delay) {
+ udelay(delay);
+ }
+
+ trace_regulator_enable_complete(rdev_get_name(rdev));
+
+ return 0;
+}
+
/* locks held by regulator_enable() */
static int _regulator_enable(struct regulator_dev *rdev)
{
- int ret, delay;
+ int ret;
/* check voltage and requested load before enabling */
if (rdev->constraints &&
@@ -1485,40 +1477,10 @@
if (!_regulator_can_change_status(rdev))
return -EPERM;
- if (!rdev->desc->ops->enable)
- return -EINVAL;
-
- /* Query before enabling in case configuration
- * dependent. */
- ret = _regulator_get_enable_time(rdev);
- if (ret >= 0) {
- delay = ret;
- } else {
- rdev_warn(rdev, "enable_time() failed: %d\n",
- ret);
- delay = 0;
- }
-
- trace_regulator_enable(rdev_get_name(rdev));
-
- /* Allow the regulator to ramp; it would be useful
- * to extend this for bulk operations so that the
- * regulators can ramp together. */
- ret = rdev->desc->ops->enable(rdev);
+ ret = _regulator_do_enable(rdev);
if (ret < 0)
return ret;
- trace_regulator_enable_delay(rdev_get_name(rdev));
-
- if (delay >= 1000) {
- mdelay(delay / 1000);
- udelay(delay % 1000);
- } else if (delay) {
- udelay(delay);
- }
-
- trace_regulator_enable_complete(rdev_get_name(rdev));
-
} else if (ret < 0) {
rdev_err(rdev, "is_enabled() failed: %d\n", ret);
return ret;
@@ -1567,6 +1529,30 @@
}
EXPORT_SYMBOL_GPL(regulator_enable);
+static int _regulator_do_disable(struct regulator_dev *rdev)
+{
+ int ret;
+
+ trace_regulator_disable(rdev_get_name(rdev));
+
+ if (rdev->ena_gpio) {
+ gpio_set_value_cansleep(rdev->ena_gpio,
+ rdev->ena_gpio_invert);
+ rdev->ena_gpio_state = 0;
+
+ } else if (rdev->desc->ops->disable) {
+ ret = rdev->desc->ops->disable(rdev);
+ if (ret != 0)
+ return ret;
+ }
+
+ trace_regulator_disable_complete(rdev_get_name(rdev));
+
+ _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
+ NULL);
+ return 0;
+}
+
/* locks held by regulator_disable() */
static int _regulator_disable(struct regulator_dev *rdev)
{
@@ -1581,20 +1567,12 @@
(rdev->constraints && !rdev->constraints->always_on)) {
/* we are last user */
- if (_regulator_can_change_status(rdev) &&
- rdev->desc->ops->disable) {
- trace_regulator_disable(rdev_get_name(rdev));
-
- ret = rdev->desc->ops->disable(rdev);
+ if (_regulator_can_change_status(rdev)) {
+ ret = _regulator_do_disable(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to disable\n");
return ret;
}
-
- trace_regulator_disable_complete(rdev_get_name(rdev));
-
- _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
- NULL);
}
rdev->use_count = 0;
@@ -1812,6 +1790,10 @@
static int _regulator_is_enabled(struct regulator_dev *rdev)
{
+ /* A GPIO control always takes precedence */
+ if (rdev->ena_gpio)
+ return rdev->ena_gpio_state;
+
/* If we don't know then assume that the regulator is always on */
if (!rdev->desc->ops->is_enabled)
return 1;
@@ -1883,6 +1865,31 @@
EXPORT_SYMBOL_GPL(regulator_list_voltage_linear);
/**
+ * regulator_list_voltage_table - List voltages with table based mapping
+ *
+ * @rdev: Regulator device
+ * @selector: Selector to convert into a voltage
+ *
+ * Regulators with table based mapping between voltages and
+ * selectors can set volt_table in the regulator descriptor
+ * and then use this function as their list_voltage() operation.
+ */
+int regulator_list_voltage_table(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ if (!rdev->desc->volt_table) {
+ BUG_ON(!rdev->desc->volt_table);
+ return -EINVAL;
+ }
+
+ if (selector >= rdev->desc->n_voltages)
+ return -EINVAL;
+
+ return rdev->desc->volt_table[selector];
+}
+EXPORT_SYMBOL_GPL(regulator_list_voltage_table);
+
+/**
* regulator_list_voltage - enumerate supported voltages
* @regulator: regulator source
* @selector: identify voltage to list
@@ -1928,8 +1935,18 @@
int regulator_is_supported_voltage(struct regulator *regulator,
int min_uV, int max_uV)
{
+ struct regulator_dev *rdev = regulator->rdev;
int i, voltages, ret;
+ /* If we can't change voltage check the current voltage */
+ if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+ ret = regulator_get_voltage(regulator);
+ if (ret >= 0)
+ return (min_uV >= ret && ret <= max_uV);
+ else
+ return ret;
+ }
+
ret = regulator_count_voltages(regulator);
if (ret < 0)
return ret;
@@ -2045,11 +2062,22 @@
{
int ret, voltage;
+ /* Allow uV_step to be 0 for fixed voltage */
+ if (rdev->desc->n_voltages == 1 && rdev->desc->uV_step == 0) {
+ if (min_uV <= rdev->desc->min_uV && rdev->desc->min_uV <= max_uV)
+ return 0;
+ else
+ return -EINVAL;
+ }
+
if (!rdev->desc->uV_step) {
BUG_ON(!rdev->desc->uV_step);
return -EINVAL;
}
+ if (min_uV < rdev->desc->min_uV)
+ min_uV = rdev->desc->min_uV;
+
ret = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
if (ret < 0)
return ret;
@@ -2068,7 +2096,7 @@
{
int ret;
int delay = 0;
- int best_val;
+ int best_val = 0;
unsigned int selector;
int old_selector = -1;
@@ -2081,7 +2109,8 @@
* If we can't obtain the old selector there is not enough
* info to call set_voltage_time_sel().
*/
- if (rdev->desc->ops->set_voltage_time_sel &&
+ if (_regulator_is_enabled(rdev) &&
+ rdev->desc->ops->set_voltage_time_sel &&
rdev->desc->ops->get_voltage_sel) {
old_selector = rdev->desc->ops->get_voltage_sel(rdev);
if (old_selector < 0)
@@ -2091,29 +2120,45 @@
if (rdev->desc->ops->set_voltage) {
ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV,
&selector);
- } else if (rdev->desc->ops->set_voltage_sel) {
- if (rdev->desc->ops->map_voltage)
- ret = rdev->desc->ops->map_voltage(rdev, min_uV,
- max_uV);
- else
- ret = regulator_map_voltage_iterate(rdev, min_uV,
- max_uV);
if (ret >= 0) {
- selector = ret;
- ret = rdev->desc->ops->set_voltage_sel(rdev, ret);
+ if (rdev->desc->ops->list_voltage)
+ best_val = rdev->desc->ops->list_voltage(rdev,
+ selector);
+ else
+ best_val = _regulator_get_voltage(rdev);
+ }
+
+ } else if (rdev->desc->ops->set_voltage_sel) {
+ if (rdev->desc->ops->map_voltage) {
+ ret = rdev->desc->ops->map_voltage(rdev, min_uV,
+ max_uV);
+ } else {
+ if (rdev->desc->ops->list_voltage ==
+ regulator_list_voltage_linear)
+ ret = regulator_map_voltage_linear(rdev,
+ min_uV, max_uV);
+ else
+ ret = regulator_map_voltage_iterate(rdev,
+ min_uV, max_uV);
+ }
+
+ if (ret >= 0) {
+ best_val = rdev->desc->ops->list_voltage(rdev, ret);
+ if (min_uV <= best_val && max_uV >= best_val) {
+ selector = ret;
+ ret = rdev->desc->ops->set_voltage_sel(rdev,
+ ret);
+ } else {
+ ret = -EINVAL;
+ }
}
} else {
ret = -EINVAL;
}
- if (rdev->desc->ops->list_voltage)
- best_val = rdev->desc->ops->list_voltage(rdev, selector);
- else
- best_val = -1;
-
/* Call set_voltage_time_sel if successfully obtained old_selector */
- if (ret == 0 && old_selector >= 0 &&
+ if (ret == 0 && _regulator_is_enabled(rdev) && old_selector >= 0 &&
rdev->desc->ops->set_voltage_time_sel) {
delay = rdev->desc->ops->set_voltage_time_sel(rdev,
@@ -2123,19 +2168,19 @@
delay);
delay = 0;
}
+
+ /* Insert any necessary delays */
+ if (delay >= 1000) {
+ mdelay(delay / 1000);
+ udelay(delay % 1000);
+ } else if (delay) {
+ udelay(delay);
+ }
}
- /* Insert any necessary delays */
- if (delay >= 1000) {
- mdelay(delay / 1000);
- udelay(delay % 1000);
- } else if (delay) {
- udelay(delay);
- }
-
- if (ret == 0)
+ if (ret == 0 && best_val >= 0)
_notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE,
- NULL);
+ (void *)best_val);
trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val);
@@ -2246,6 +2291,46 @@
EXPORT_SYMBOL_GPL(regulator_set_voltage_time);
/**
+ *regulator_set_voltage_time_sel - get raise/fall time
+ * @regulator: regulator source
+ * @old_selector: selector for starting voltage
+ * @new_selector: selector for target voltage
+ *
+ * Provided with the starting and target voltage selectors, this function
+ * returns time in microseconds required to rise or fall to this new voltage
+ *
+ * Drivers providing ramp_delay in regulation_constraints can use this as their
+ * set_voltage_time_sel() operation.
+ */
+int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
+ unsigned int old_selector,
+ unsigned int new_selector)
+{
+ unsigned int ramp_delay = 0;
+ int old_volt, new_volt;
+
+ if (rdev->constraints->ramp_delay)
+ ramp_delay = rdev->constraints->ramp_delay;
+ else if (rdev->desc->ramp_delay)
+ ramp_delay = rdev->desc->ramp_delay;
+
+ if (ramp_delay == 0) {
+ rdev_warn(rdev, "ramp_delay not set\n");
+ return 0;
+ }
+
+ /* sanity check */
+ if (!rdev->desc->ops->list_voltage)
+ return -EINVAL;
+
+ old_volt = rdev->desc->ops->list_voltage(rdev, old_selector);
+ new_volt = rdev->desc->ops->list_voltage(rdev, new_selector);
+
+ return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
+}
+EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel);
+
+/**
* regulator_sync_voltage - re-apply last regulator output voltage
* @regulator: regulator source
*
@@ -2516,9 +2601,12 @@
{
struct regulator_dev *rdev = regulator->rdev;
struct regulator *consumer;
- int ret, output_uV, input_uV, total_uA_load = 0;
+ int ret, output_uV, input_uV = 0, total_uA_load = 0;
unsigned int mode;
+ if (rdev->supply)
+ input_uV = regulator_get_voltage(rdev->supply);
+
mutex_lock(&rdev->mutex);
/*
@@ -2551,10 +2639,7 @@
goto out;
}
- /* get input voltage */
- input_uV = 0;
- if (rdev->supply)
- input_uV = regulator_get_voltage(rdev->supply);
+ /* No supply? Use constraint voltage */
if (input_uV <= 0)
input_uV = rdev->constraints->input_uV;
if (input_uV <= 0) {
@@ -2625,7 +2710,7 @@
unsigned long event, void *data)
{
/* call rdev chain first */
- blocking_notifier_call_chain(&rdev->notifier, event, NULL);
+ blocking_notifier_call_chain(&rdev->notifier, event, data);
}
/**
@@ -2906,10 +2991,10 @@
return REGULATOR_STATUS_NORMAL;
case REGULATOR_MODE_IDLE:
return REGULATOR_STATUS_IDLE;
- case REGULATOR_STATUS_STANDBY:
+ case REGULATOR_MODE_STANDBY:
return REGULATOR_STATUS_STANDBY;
default:
- return 0;
+ return REGULATOR_STATUS_UNDEFINED;
}
}
EXPORT_SYMBOL_GPL(regulator_mode_to_status);
@@ -3102,7 +3187,10 @@
rdev->reg_data = config->driver_data;
rdev->owner = regulator_desc->owner;
rdev->desc = regulator_desc;
- rdev->regmap = config->regmap;
+ if (config->regmap)
+ rdev->regmap = config->regmap;
+ else
+ rdev->regmap = dev_get_regmap(dev, NULL);
INIT_LIST_HEAD(&rdev->consumer_list);
INIT_LIST_HEAD(&rdev->list);
BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
@@ -3129,6 +3217,26 @@
dev_set_drvdata(&rdev->dev, rdev);
+ if (config->ena_gpio) {
+ ret = gpio_request_one(config->ena_gpio,
+ GPIOF_DIR_OUT | config->ena_gpio_flags,
+ rdev_get_name(rdev));
+ if (ret != 0) {
+ rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
+ config->ena_gpio, ret);
+ goto clean;
+ }
+
+ rdev->ena_gpio = config->ena_gpio;
+ rdev->ena_gpio_invert = config->ena_gpio_invert;
+
+ if (config->ena_gpio_flags & GPIOF_OUT_INIT_HIGH)
+ rdev->ena_gpio_state = 1;
+
+ if (rdev->ena_gpio_invert)
+ rdev->ena_gpio_state = !rdev->ena_gpio_state;
+ }
+
/* set regulator constraints */
if (init_data)
constraints = &init_data->constraints;
@@ -3197,6 +3305,8 @@
scrub:
if (rdev->supply)
regulator_put(rdev->supply);
+ if (rdev->ena_gpio)
+ gpio_free(rdev->ena_gpio);
kfree(rdev->constraints);
device_unregister(&rdev->dev);
/* device core frees rdev */
@@ -3230,6 +3340,8 @@
unset_regulator_supplies(rdev);
list_del(&rdev->list);
kfree(rdev->constraints);
+ if (rdev->ena_gpio)
+ gpio_free(rdev->ena_gpio);
device_unregister(&rdev->dev);
mutex_unlock(®ulator_list_mutex);
}
@@ -3469,6 +3581,15 @@
struct regulation_constraints *c;
int enabled, ret;
+ /*
+ * Since DT doesn't provide an idiomatic mechanism for
+ * enabling full constraints and since it's much more natural
+ * with DT to provide them just assume that a DT enabled
+ * system has full constraints.
+ */
+ if (of_have_populated_dt())
+ has_full_constraints = true;
+
mutex_lock(®ulator_list_mutex);
/* If we have a full configuration then disable any regulators
diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c
index 1005f5f..36c5b92 100644
--- a/drivers/regulator/da903x.c
+++ b/drivers/regulator/da903x.c
@@ -107,6 +107,9 @@
struct device *da9034_dev = to_da903x_dev(rdev);
uint8_t val, mask;
+ if (rdev->desc->n_voltages == 1)
+ return -EINVAL;
+
val = selector << info->vol_shift;
mask = ((1 << info->vol_nbits) - 1) << info->vol_shift;
@@ -120,6 +123,9 @@
uint8_t val, mask;
int ret;
+ if (rdev->desc->n_voltages == 1)
+ return 0;
+
ret = da903x_read(da9034_dev, info->vol_reg, &val);
if (ret)
return ret;
diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index 88976d8..903299c 100644
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -405,12 +405,12 @@
if (!nproot)
return -ENODEV;
- for (np = of_get_next_child(nproot, NULL); np;
- np = of_get_next_child(nproot, np)) {
+ for_each_child_of_node(nproot, np) {
if (!of_node_cmp(np->name,
regulator->info->reg_desc.name)) {
config.init_data = of_get_regulator_init_data(
&pdev->dev, np);
+ config.of_node = np;
break;
}
}
diff --git a/drivers/regulator/db8500-prcmu.c b/drivers/regulator/db8500-prcmu.c
index 968f97f..9dbb491 100644
--- a/drivers/regulator/db8500-prcmu.c
+++ b/drivers/regulator/db8500-prcmu.c
@@ -452,26 +452,26 @@
}
static struct of_regulator_match db8500_regulator_matches[] = {
- { .name = "db8500-vape", .driver_data = (void *) DB8500_REGULATOR_VAPE, },
- { .name = "db8500-varm", .driver_data = (void *) DB8500_REGULATOR_VARM, },
- { .name = "db8500-vmodem", .driver_data = (void *) DB8500_REGULATOR_VMODEM, },
- { .name = "db8500-vpll", .driver_data = (void *) DB8500_REGULATOR_VPLL, },
- { .name = "db8500-vsmps1", .driver_data = (void *) DB8500_REGULATOR_VSMPS1, },
- { .name = "db8500-vsmps2", .driver_data = (void *) DB8500_REGULATOR_VSMPS2, },
- { .name = "db8500-vsmps3", .driver_data = (void *) DB8500_REGULATOR_VSMPS3, },
- { .name = "db8500-vrf1", .driver_data = (void *) DB8500_REGULATOR_VRF1, },
- { .name = "db8500-sva-mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSP, },
- { .name = "db8500-sva-mmdsp-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSPRET, },
- { .name = "db8500-sva-pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAPIPE, },
- { .name = "db8500-sia-mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSP, },
- { .name = "db8500-sia-mmdsp-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSPRET, },
- { .name = "db8500-sia-pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAPIPE, },
- { .name = "db8500-sga", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SGA, },
- { .name = "db8500-b2r2-mcde", .driver_data = (void *) DB8500_REGULATOR_SWITCH_B2R2_MCDE, },
- { .name = "db8500-esram12", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12, },
- { .name = "db8500-esram12-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12RET, },
- { .name = "db8500-esram34", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34, },
- { .name = "db8500-esram34-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34RET, },
+ { .name = "db8500_vape", .driver_data = (void *) DB8500_REGULATOR_VAPE, },
+ { .name = "db8500_varm", .driver_data = (void *) DB8500_REGULATOR_VARM, },
+ { .name = "db8500_vmodem", .driver_data = (void *) DB8500_REGULATOR_VMODEM, },
+ { .name = "db8500_vpll", .driver_data = (void *) DB8500_REGULATOR_VPLL, },
+ { .name = "db8500_vsmps1", .driver_data = (void *) DB8500_REGULATOR_VSMPS1, },
+ { .name = "db8500_vsmps2", .driver_data = (void *) DB8500_REGULATOR_VSMPS2, },
+ { .name = "db8500_vsmps3", .driver_data = (void *) DB8500_REGULATOR_VSMPS3, },
+ { .name = "db8500_vrf1", .driver_data = (void *) DB8500_REGULATOR_VRF1, },
+ { .name = "db8500_sva_mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSP, },
+ { .name = "db8500_sva_mmdsp_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSPRET, },
+ { .name = "db8500_sva_pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAPIPE, },
+ { .name = "db8500_sia_mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSP, },
+ { .name = "db8500_sia_mmdsp_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSPRET, },
+ { .name = "db8500_sia_pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAPIPE, },
+ { .name = "db8500_sga", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SGA, },
+ { .name = "db8500_b2r2_mcde", .driver_data = (void *) DB8500_REGULATOR_SWITCH_B2R2_MCDE, },
+ { .name = "db8500_esram12", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12, },
+ { .name = "db8500_esram12_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12RET, },
+ { .name = "db8500_esram34", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34, },
+ { .name = "db8500_esram34_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34RET, },
};
static __devinit int
diff --git a/drivers/regulator/fixed-helper.c b/drivers/regulator/fixed-helper.c
index cacd33c..f9d0279 100644
--- a/drivers/regulator/fixed-helper.c
+++ b/drivers/regulator/fixed-helper.c
@@ -1,4 +1,5 @@
#include <linux/slab.h>
+#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
@@ -13,17 +14,20 @@
{
struct fixed_regulator_data *data = container_of(dev,
struct fixed_regulator_data, pdev.dev);
+ kfree(data->cfg.supply_name);
kfree(data);
}
/**
- * regulator_register_fixed - register a no-op fixed regulator
+ * regulator_register_fixed_name - register a no-op fixed regulator
* @id: platform device id
+ * @name: name to be used for the regulator
* @supplies: consumers for this regulator
* @num_supplies: number of consumers
+ * @uv: voltage in microvolts
*/
-struct platform_device *regulator_register_fixed(int id,
- struct regulator_consumer_supply *supplies, int num_supplies)
+struct platform_device *regulator_register_always_on(int id, const char *name,
+ struct regulator_consumer_supply *supplies, int num_supplies, int uv)
{
struct fixed_regulator_data *data;
@@ -31,8 +35,13 @@
if (!data)
return NULL;
- data->cfg.supply_name = "fixed-dummy";
- data->cfg.microvolts = 0;
+ data->cfg.supply_name = kstrdup(name, GFP_KERNEL);
+ if (!data->cfg.supply_name) {
+ kfree(data);
+ return NULL;
+ }
+
+ data->cfg.microvolts = uv;
data->cfg.gpio = -EINVAL;
data->cfg.enabled_at_boot = 1;
data->cfg.init_data = &data->init_data;
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index f09fe7b..185468c 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -35,10 +35,6 @@
struct regulator_desc desc;
struct regulator_dev *dev;
int microvolts;
- int gpio;
- unsigned startup_delay;
- bool enable_high;
- bool is_enabled;
};
@@ -61,11 +57,11 @@
config = devm_kzalloc(dev, sizeof(struct fixed_voltage_config),
GFP_KERNEL);
if (!config)
- return NULL;
+ return ERR_PTR(-ENOMEM);
config->init_data = of_get_regulator_init_data(dev, dev->of_node);
if (!config->init_data)
- return NULL;
+ return ERR_PTR(-EINVAL);
init_data = config->init_data;
init_data->constraints.apply_uV = 0;
@@ -76,13 +72,26 @@
} else {
dev_err(dev,
"Fixed regulator specified with variable voltages\n");
- return NULL;
+ return ERR_PTR(-EINVAL);
}
if (init_data->constraints.boot_on)
config->enabled_at_boot = true;
config->gpio = of_get_named_gpio(np, "gpio", 0);
+ /*
+ * of_get_named_gpio() currently returns ENODEV rather than
+ * EPROBE_DEFER. This code attempts to be compatible with both
+ * for now; the ENODEV check can be removed once the API is fixed.
+ * of_get_named_gpio() doesn't differentiate between a missing
+ * property (which would be fine here, since the GPIO is optional)
+ * and some other error. Patches have been posted for both issues.
+ * Once they are check in, we should replace this with:
+ * if (config->gpio < 0 && config->gpio != -ENOENT)
+ */
+ if ((config->gpio == -ENODEV) || (config->gpio == -EPROBE_DEFER))
+ return ERR_PTR(-EPROBE_DEFER);
+
delay = of_get_property(np, "startup-delay-us", NULL);
if (delay)
config->startup_delay = be32_to_cpu(*delay);
@@ -93,43 +102,12 @@
if (of_find_property(np, "gpio-open-drain", NULL))
config->gpio_is_open_drain = true;
+ if (of_find_property(np, "vin-supply", NULL))
+ config->input_supply = "vin";
+
return config;
}
-static int fixed_voltage_is_enabled(struct regulator_dev *dev)
-{
- struct fixed_voltage_data *data = rdev_get_drvdata(dev);
-
- return data->is_enabled;
-}
-
-static int fixed_voltage_enable(struct regulator_dev *dev)
-{
- struct fixed_voltage_data *data = rdev_get_drvdata(dev);
-
- gpio_set_value_cansleep(data->gpio, data->enable_high);
- data->is_enabled = true;
-
- return 0;
-}
-
-static int fixed_voltage_disable(struct regulator_dev *dev)
-{
- struct fixed_voltage_data *data = rdev_get_drvdata(dev);
-
- gpio_set_value_cansleep(data->gpio, !data->enable_high);
- data->is_enabled = false;
-
- return 0;
-}
-
-static int fixed_voltage_enable_time(struct regulator_dev *dev)
-{
- struct fixed_voltage_data *data = rdev_get_drvdata(dev);
-
- return data->startup_delay;
-}
-
static int fixed_voltage_get_voltage(struct regulator_dev *dev)
{
struct fixed_voltage_data *data = rdev_get_drvdata(dev);
@@ -151,15 +129,6 @@
return data->microvolts;
}
-static struct regulator_ops fixed_voltage_gpio_ops = {
- .is_enabled = fixed_voltage_is_enabled,
- .enable = fixed_voltage_enable,
- .disable = fixed_voltage_disable,
- .enable_time = fixed_voltage_enable_time,
- .get_voltage = fixed_voltage_get_voltage,
- .list_voltage = fixed_voltage_list_voltage,
-};
-
static struct regulator_ops fixed_voltage_ops = {
.get_voltage = fixed_voltage_get_voltage,
.list_voltage = fixed_voltage_list_voltage,
@@ -172,10 +141,13 @@
struct regulator_config cfg = { };
int ret;
- if (pdev->dev.of_node)
+ if (pdev->dev.of_node) {
config = of_get_fixed_voltage_config(&pdev->dev);
- else
+ if (IS_ERR(config))
+ return PTR_ERR(config);
+ } else {
config = pdev->dev.platform_data;
+ }
if (!config)
return -ENOMEM;
@@ -196,59 +168,44 @@
}
drvdata->desc.type = REGULATOR_VOLTAGE;
drvdata->desc.owner = THIS_MODULE;
+ drvdata->desc.ops = &fixed_voltage_ops;
+
+ drvdata->desc.enable_time = config->startup_delay;
+
+ if (config->input_supply) {
+ drvdata->desc.supply_name = kstrdup(config->input_supply,
+ GFP_KERNEL);
+ if (!drvdata->desc.supply_name) {
+ dev_err(&pdev->dev,
+ "Failed to allocate input supply\n");
+ ret = -ENOMEM;
+ goto err_name;
+ }
+ }
if (config->microvolts)
drvdata->desc.n_voltages = 1;
drvdata->microvolts = config->microvolts;
- drvdata->gpio = config->gpio;
- drvdata->startup_delay = config->startup_delay;
- if (gpio_is_valid(config->gpio)) {
- int gpio_flag;
- drvdata->enable_high = config->enable_high;
-
- /* FIXME: Remove below print warning
- *
- * config->gpio must be set to -EINVAL by platform code if
- * GPIO control is not required. However, early adopters
- * not requiring GPIO control may forget to initialize
- * config->gpio to -EINVAL. This will cause GPIO 0 to be used
- * for GPIO control.
- *
- * This warning will be removed once there are a couple of users
- * for this driver.
- */
- if (!config->gpio)
- dev_warn(&pdev->dev,
- "using GPIO 0 for regulator enable control\n");
-
- /*
- * set output direction without changing state
- * to prevent glitch
- */
- drvdata->is_enabled = config->enabled_at_boot;
- ret = drvdata->is_enabled ?
- config->enable_high : !config->enable_high;
- gpio_flag = ret ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-
- if (config->gpio_is_open_drain)
- gpio_flag |= GPIOF_OPEN_DRAIN;
-
- ret = gpio_request_one(config->gpio, gpio_flag,
- config->supply_name);
- if (ret) {
- dev_err(&pdev->dev,
- "Could not obtain regulator enable GPIO %d: %d\n",
- config->gpio, ret);
- goto err_name;
+ if (config->gpio >= 0)
+ cfg.ena_gpio = config->gpio;
+ cfg.ena_gpio_invert = !config->enable_high;
+ if (config->enabled_at_boot) {
+ if (config->enable_high) {
+ cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
+ } else {
+ cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
}
-
- drvdata->desc.ops = &fixed_voltage_gpio_ops;
-
} else {
- drvdata->desc.ops = &fixed_voltage_ops;
+ if (config->enable_high) {
+ cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
+ } else {
+ cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
+ }
}
+ if (config->gpio_is_open_drain)
+ cfg.ena_gpio_flags |= GPIOF_OPEN_DRAIN;
cfg.dev = &pdev->dev;
cfg.init_data = config->init_data;
@@ -259,7 +216,7 @@
if (IS_ERR(drvdata->dev)) {
ret = PTR_ERR(drvdata->dev);
dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
- goto err_gpio;
+ goto err_input;
}
platform_set_drvdata(pdev, drvdata);
@@ -269,9 +226,8 @@
return 0;
-err_gpio:
- if (gpio_is_valid(config->gpio))
- gpio_free(config->gpio);
+err_input:
+ kfree(drvdata->desc.supply_name);
err_name:
kfree(drvdata->desc.name);
err:
@@ -283,8 +239,7 @@
struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev);
regulator_unregister(drvdata->dev);
- if (gpio_is_valid(drvdata->gpio))
- gpio_free(drvdata->gpio);
+ kfree(drvdata->desc.supply_name);
kfree(drvdata->desc.name);
return 0;
@@ -296,8 +251,6 @@
{},
};
MODULE_DEVICE_TABLE(of, fixed_of_match);
-#else
-#define fixed_of_match NULL
#endif
static struct platform_driver regulator_fixed_voltage_driver = {
@@ -306,7 +259,7 @@
.driver = {
.name = "reg-fixed-voltage",
.owner = THIS_MODULE,
- .of_match_table = fixed_of_match,
+ .of_match_table = of_match_ptr(fixed_of_match),
},
};
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
index 9997d7a..34b67be 100644
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -36,11 +36,6 @@
struct regulator_desc desc;
struct regulator_dev *dev;
- int enable_gpio;
- bool enable_high;
- bool is_enabled;
- unsigned startup_delay;
-
struct gpio *gpios;
int nr_gpios;
@@ -50,44 +45,6 @@
int state;
};
-static int gpio_regulator_is_enabled(struct regulator_dev *dev)
-{
- struct gpio_regulator_data *data = rdev_get_drvdata(dev);
-
- return data->is_enabled;
-}
-
-static int gpio_regulator_enable(struct regulator_dev *dev)
-{
- struct gpio_regulator_data *data = rdev_get_drvdata(dev);
-
- if (gpio_is_valid(data->enable_gpio)) {
- gpio_set_value_cansleep(data->enable_gpio, data->enable_high);
- data->is_enabled = true;
- }
-
- return 0;
-}
-
-static int gpio_regulator_disable(struct regulator_dev *dev)
-{
- struct gpio_regulator_data *data = rdev_get_drvdata(dev);
-
- if (gpio_is_valid(data->enable_gpio)) {
- gpio_set_value_cansleep(data->enable_gpio, !data->enable_high);
- data->is_enabled = false;
- }
-
- return 0;
-}
-
-static int gpio_regulator_enable_time(struct regulator_dev *dev)
-{
- struct gpio_regulator_data *data = rdev_get_drvdata(dev);
-
- return data->startup_delay;
-}
-
static int gpio_regulator_get_value(struct regulator_dev *dev)
{
struct gpio_regulator_data *data = rdev_get_drvdata(dev);
@@ -101,16 +58,20 @@
}
static int gpio_regulator_set_value(struct regulator_dev *dev,
- int min, int max)
+ int min, int max, unsigned *selector)
{
struct gpio_regulator_data *data = rdev_get_drvdata(dev);
- int ptr, target, state, best_val = INT_MAX;
+ int ptr, target = 0, state, best_val = INT_MAX;
for (ptr = 0; ptr < data->nr_states; ptr++)
if (data->states[ptr].value < best_val &&
data->states[ptr].value >= min &&
- data->states[ptr].value <= max)
+ data->states[ptr].value <= max) {
target = data->states[ptr].gpios;
+ best_val = data->states[ptr].value;
+ if (selector)
+ *selector = ptr;
+ }
if (best_val == INT_MAX)
return -EINVAL;
@@ -128,7 +89,7 @@
int min_uV, int max_uV,
unsigned *selector)
{
- return gpio_regulator_set_value(dev, min_uV, max_uV);
+ return gpio_regulator_set_value(dev, min_uV, max_uV, selector);
}
static int gpio_regulator_list_voltage(struct regulator_dev *dev,
@@ -145,24 +106,16 @@
static int gpio_regulator_set_current_limit(struct regulator_dev *dev,
int min_uA, int max_uA)
{
- return gpio_regulator_set_value(dev, min_uA, max_uA);
+ return gpio_regulator_set_value(dev, min_uA, max_uA, NULL);
}
static struct regulator_ops gpio_regulator_voltage_ops = {
- .is_enabled = gpio_regulator_is_enabled,
- .enable = gpio_regulator_enable,
- .disable = gpio_regulator_disable,
- .enable_time = gpio_regulator_enable_time,
.get_voltage = gpio_regulator_get_value,
.set_voltage = gpio_regulator_set_voltage,
.list_voltage = gpio_regulator_list_voltage,
};
static struct regulator_ops gpio_regulator_current_ops = {
- .is_enabled = gpio_regulator_is_enabled,
- .enable = gpio_regulator_enable,
- .disable = gpio_regulator_disable,
- .enable_time = gpio_regulator_enable_time,
.get_current_limit = gpio_regulator_get_value,
.set_current_limit = gpio_regulator_set_current_limit,
};
@@ -209,6 +162,7 @@
drvdata->nr_states = config->nr_states;
drvdata->desc.owner = THIS_MODULE;
+ drvdata->desc.enable_time = config->startup_delay;
/* handle regulator type*/
switch (config->type) {
@@ -228,52 +182,12 @@
break;
}
- drvdata->enable_gpio = config->enable_gpio;
- drvdata->startup_delay = config->startup_delay;
-
- if (gpio_is_valid(config->enable_gpio)) {
- drvdata->enable_high = config->enable_high;
-
- ret = gpio_request(config->enable_gpio, config->supply_name);
- if (ret) {
- dev_err(&pdev->dev,
- "Could not obtain regulator enable GPIO %d: %d\n",
- config->enable_gpio, ret);
- goto err_memstate;
- }
-
- /* set output direction without changing state
- * to prevent glitch
- */
- if (config->enabled_at_boot) {
- drvdata->is_enabled = true;
- ret = gpio_direction_output(config->enable_gpio,
- config->enable_high);
- } else {
- drvdata->is_enabled = false;
- ret = gpio_direction_output(config->enable_gpio,
- !config->enable_high);
- }
-
- if (ret) {
- dev_err(&pdev->dev,
- "Could not configure regulator enable GPIO %d direction: %d\n",
- config->enable_gpio, ret);
- goto err_enablegpio;
- }
- } else {
- /* Regulator without GPIO control is considered
- * always enabled
- */
- drvdata->is_enabled = true;
- }
-
drvdata->nr_gpios = config->nr_gpios;
ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
if (ret) {
dev_err(&pdev->dev,
"Could not obtain regulator setting GPIOs: %d\n", ret);
- goto err_enablegpio;
+ goto err_memstate;
}
/* build initial state from gpio init data. */
@@ -286,7 +200,22 @@
cfg.dev = &pdev->dev;
cfg.init_data = config->init_data;
- cfg.driver_data = &drvdata;
+ cfg.driver_data = drvdata;
+
+ if (config->enable_gpio >= 0)
+ cfg.ena_gpio = config->enable_gpio;
+ cfg.ena_gpio_invert = !config->enable_high;
+ if (config->enabled_at_boot) {
+ if (config->enable_high)
+ cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
+ else
+ cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
+ } else {
+ if (config->enable_high)
+ cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
+ else
+ cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
+ }
drvdata->dev = regulator_register(&drvdata->desc, &cfg);
if (IS_ERR(drvdata->dev)) {
@@ -301,9 +230,6 @@
err_stategpio:
gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
-err_enablegpio:
- if (gpio_is_valid(config->enable_gpio))
- gpio_free(config->enable_gpio);
err_memstate:
kfree(drvdata->states);
err_memgpio:
@@ -325,9 +251,6 @@
kfree(drvdata->states);
kfree(drvdata->gpios);
- if (gpio_is_valid(drvdata->enable_gpio))
- gpio_free(drvdata->enable_gpio);
-
kfree(drvdata->desc.name);
return 0;
diff --git a/drivers/regulator/isl6271a-regulator.c b/drivers/regulator/isl6271a-regulator.c
index 56d273f..1d145a0 100644
--- a/drivers/regulator/isl6271a-regulator.c
+++ b/drivers/regulator/isl6271a-regulator.c
@@ -75,19 +75,12 @@
static int isl6271a_get_fixed_voltage(struct regulator_dev *dev)
{
- int id = rdev_get_id(dev);
- return (id == 1) ? 1100000 : 1300000;
-}
-
-static int isl6271a_list_fixed_voltage(struct regulator_dev *dev, unsigned selector)
-{
- int id = rdev_get_id(dev);
- return (id == 1) ? 1100000 : 1300000;
+ return dev->desc->min_uV;
}
static struct regulator_ops isl_fixed_ops = {
.get_voltage = isl6271a_get_fixed_voltage,
- .list_voltage = isl6271a_list_fixed_voltage,
+ .list_voltage = regulator_list_voltage_linear,
};
static const struct regulator_desc isl_rd[] = {
@@ -107,6 +100,7 @@
.ops = &isl_fixed_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .min_uV = 1100000,
}, {
.name = "LDO2",
.id = 2,
@@ -114,6 +108,7 @@
.ops = &isl_fixed_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .min_uV = 1300000,
},
};
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index 981bea9..7c6e3b8 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -65,11 +65,11 @@
#define LP3971_BUCK_TARGET_VOL1_REG(x) (buck_base_addr[x])
#define LP3971_BUCK_TARGET_VOL2_REG(x) (buck_base_addr[x]+1)
-static const int buck_voltage_map[] = {
- 0, 800, 850, 900, 950, 1000, 1050, 1100,
- 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500,
- 1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800,
- 3000, 3300,
+static const unsigned int buck_voltage_map[] = {
+ 0, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000,
+ 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000,
+ 1550000, 1600000, 1650000, 1700000, 1800000, 1900000, 2500000, 2800000,
+ 3000000, 3300000,
};
#define BUCK_TARGET_VOL_MASK 0x3f
@@ -98,39 +98,19 @@
#define LDO_VOL_CONTR_SHIFT(x) ((x & 1) << 2)
#define LDO_VOL_CONTR_MASK 0x0f
-static const int ldo45_voltage_map[] = {
- 1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350,
- 1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300,
+static const unsigned int ldo45_voltage_map[] = {
+ 1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1350000,
+ 1400000, 1500000, 1800000, 1900000, 2500000, 2800000, 3000000, 3300000,
};
-static const int ldo123_voltage_map[] = {
- 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500,
- 2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300,
+static const unsigned int ldo123_voltage_map[] = {
+ 1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
+ 2600000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000,
};
-static const int *ldo_voltage_map[] = {
- ldo123_voltage_map, /* LDO1 */
- ldo123_voltage_map, /* LDO2 */
- ldo123_voltage_map, /* LDO3 */
- ldo45_voltage_map, /* LDO4 */
- ldo45_voltage_map, /* LDO5 */
-};
-
-#define LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[(x - LP3971_LDO1)])
-
#define LDO_VOL_MIN_IDX 0x00
#define LDO_VOL_MAX_IDX 0x0f
-static int lp3971_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
-{
- int ldo = rdev_get_id(dev) - LP3971_LDO1;
-
- if (index > LDO_VOL_MAX_IDX)
- return -EINVAL;
-
- return 1000 * LDO_VOL_VALUE_MAP(ldo)[index];
-}
-
static int lp3971_ldo_is_enabled(struct regulator_dev *dev)
{
struct lp3971 *lp3971 = rdev_get_drvdata(dev);
@@ -169,7 +149,7 @@
reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo));
val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK;
- return 1000 * LDO_VOL_VALUE_MAP(ldo)[val];
+ return dev->desc->volt_table[val];
}
static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev,
@@ -184,7 +164,7 @@
}
static struct regulator_ops lp3971_ldo_ops = {
- .list_voltage = lp3971_ldo_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.is_enabled = lp3971_ldo_is_enabled,
.enable = lp3971_ldo_enable,
.disable = lp3971_ldo_disable,
@@ -192,14 +172,6 @@
.set_voltage_sel = lp3971_ldo_set_voltage_sel,
};
-static int lp3971_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
-{
- if (index < BUCK_TARGET_VOL_MIN_IDX || index > BUCK_TARGET_VOL_MAX_IDX)
- return -EINVAL;
-
- return 1000 * buck_voltage_map[index];
-}
-
static int lp3971_dcdc_is_enabled(struct regulator_dev *dev)
{
struct lp3971 *lp3971 = rdev_get_drvdata(dev);
@@ -240,7 +212,7 @@
reg &= BUCK_TARGET_VOL_MASK;
if (reg <= BUCK_TARGET_VOL_MAX_IDX)
- val = 1000 * buck_voltage_map[reg];
+ val = buck_voltage_map[reg];
else {
val = 0;
dev_warn(&dev->dev, "chip reported incorrect voltage value.\n");
@@ -273,7 +245,7 @@
}
static struct regulator_ops lp3971_dcdc_ops = {
- .list_voltage = lp3971_dcdc_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.is_enabled = lp3971_dcdc_is_enabled,
.enable = lp3971_dcdc_enable,
.disable = lp3971_dcdc_disable,
@@ -287,6 +259,7 @@
.id = LP3971_LDO1,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+ .volt_table = ldo123_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -295,6 +268,7 @@
.id = LP3971_LDO2,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+ .volt_table = ldo123_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -303,6 +277,7 @@
.id = LP3971_LDO3,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+ .volt_table = ldo123_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -311,6 +286,7 @@
.id = LP3971_LDO4,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo45_voltage_map),
+ .volt_table = ldo45_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -319,6 +295,7 @@
.id = LP3971_LDO5,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo45_voltage_map),
+ .volt_table = ldo45_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -327,6 +304,7 @@
.id = LP3971_DCDC1,
.ops = &lp3971_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck_voltage_map),
+ .volt_table = buck_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -335,6 +313,7 @@
.id = LP3971_DCDC2,
.ops = &lp3971_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck_voltage_map),
+ .volt_table = buck_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -343,6 +322,7 @@
.id = LP3971_DCDC3,
.ops = &lp3971_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck_voltage_map),
+ .volt_table = buck_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
diff --git a/drivers/regulator/lp3972.c b/drivers/regulator/lp3972.c
index de073df..3cdc755 100644
--- a/drivers/regulator/lp3972.c
+++ b/drivers/regulator/lp3972.c
@@ -74,54 +74,40 @@
#define LP3972_OVER2_LDO4_EN BIT(4)
#define LP3972_OVER1_S_EN BIT(2)
-static const int ldo1_voltage_map[] = {
- 1700, 1725, 1750, 1775, 1800, 1825, 1850, 1875,
- 1900, 1925, 1950, 1975, 2000,
+static const unsigned int ldo1_voltage_map[] = {
+ 1700000, 1725000, 1750000, 1775000, 1800000, 1825000, 1850000, 1875000,
+ 1900000, 1925000, 1950000, 1975000, 2000000,
};
-static const int ldo23_voltage_map[] = {
- 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500,
- 2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300,
+static const unsigned int ldo23_voltage_map[] = {
+ 1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
+ 2600000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000,
};
-static const int ldo4_voltage_map[] = {
- 1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350,
- 1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300,
+static const unsigned int ldo4_voltage_map[] = {
+ 1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1350000,
+ 1400000, 1500000, 1800000, 1900000, 2500000, 2800000, 3000000, 3300000,
};
-static const int ldo5_voltage_map[] = {
- 0, 0, 0, 0, 0, 850, 875, 900,
- 925, 950, 975, 1000, 1025, 1050, 1075, 1100,
- 1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300,
- 1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500,
+static const unsigned int ldo5_voltage_map[] = {
+ 0, 0, 0, 0, 0, 850000, 875000, 900000,
+ 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000,
+ 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000,
+ 1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000,
};
-static const int buck1_voltage_map[] = {
- 725, 750, 775, 800, 825, 850, 875, 900,
- 925, 950, 975, 1000, 1025, 1050, 1075, 1100,
- 1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300,
- 1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500,
+static const unsigned int buck1_voltage_map[] = {
+ 725000, 750000, 775000, 800000, 825000, 850000, 875000, 900000,
+ 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000,
+ 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000,
+ 1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000,
};
-static const int buck23_voltage_map[] = {
- 0, 800, 850, 900, 950, 1000, 1050, 1100,
- 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500,
- 1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800,
- 3000, 3300,
-};
-
-static const int *ldo_voltage_map[] = {
- ldo1_voltage_map,
- ldo23_voltage_map,
- ldo23_voltage_map,
- ldo4_voltage_map,
- ldo5_voltage_map,
-};
-
-static const int *buck_voltage_map[] = {
- buck1_voltage_map,
- buck23_voltage_map,
- buck23_voltage_map,
+static const unsigned int buck23_voltage_map[] = {
+ 0, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000,
+ 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000,
+ 1550000, 1600000, 1650000, 1700000, 1800000, 1900000, 2500000, 2800000,
+ 3000000, 3300000,
};
static const int ldo_output_enable_mask[] = {
@@ -160,7 +146,6 @@
LP3972_B3TV_REG,
};
-#define LP3972_LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[x])
#define LP3972_LDO_OUTPUT_ENABLE_MASK(x) (ldo_output_enable_mask[x])
#define LP3972_LDO_OUTPUT_ENABLE_REG(x) (ldo_output_enable_addr[x])
@@ -177,7 +162,6 @@
#define LP3972_LDO_VOL_MIN_IDX(x) (((x) == 4) ? 0x05 : 0x00)
#define LP3972_LDO_VOL_MAX_IDX(x) ((x) ? (((x) == 4) ? 0x1f : 0x0f) : 0x0c)
-#define LP3972_BUCK_VOL_VALUE_MAP(x) (buck_voltage_map[x])
#define LP3972_BUCK_VOL_ENABLE_REG(x) (buck_vol_enable_addr[x])
#define LP3972_BUCK_VOL1_REG(x) (buck_base_addr[x])
#define LP3972_BUCK_VOL_MASK 0x1f
@@ -242,17 +226,6 @@
return ret;
}
-static int lp3972_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
-{
- int ldo = rdev_get_id(dev) - LP3972_LDO1;
-
- if (index < LP3972_LDO_VOL_MIN_IDX(ldo) ||
- index > LP3972_LDO_VOL_MAX_IDX(ldo))
- return -EINVAL;
-
- return 1000 * LP3972_LDO_VOL_VALUE_MAP(ldo)[index];
-}
-
static int lp3972_ldo_is_enabled(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
@@ -294,7 +267,7 @@
reg = lp3972_reg_read(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo));
val = (reg >> LP3972_LDO_VOL_CONTR_SHIFT(ldo)) & mask;
- return 1000 * LP3972_LDO_VOL_VALUE_MAP(ldo)[val];
+ return dev->desc->volt_table[val];
}
static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev,
@@ -337,7 +310,7 @@
}
static struct regulator_ops lp3972_ldo_ops = {
- .list_voltage = lp3972_ldo_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.is_enabled = lp3972_ldo_is_enabled,
.enable = lp3972_ldo_enable,
.disable = lp3972_ldo_disable,
@@ -345,17 +318,6 @@
.set_voltage_sel = lp3972_ldo_set_voltage_sel,
};
-static int lp3972_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
-{
- int buck = rdev_get_id(dev) - LP3972_DCDC1;
-
- if (index < LP3972_BUCK_VOL_MIN_IDX(buck) ||
- index > LP3972_BUCK_VOL_MAX_IDX(buck))
- return -EINVAL;
-
- return 1000 * buck_voltage_map[buck][index];
-}
-
static int lp3972_dcdc_is_enabled(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
@@ -401,7 +363,7 @@
reg = lp3972_reg_read(lp3972, LP3972_BUCK_VOL1_REG(buck));
reg &= LP3972_BUCK_VOL_MASK;
if (reg <= LP3972_BUCK_VOL_MAX_IDX(buck))
- val = 1000 * buck_voltage_map[buck][reg];
+ val = dev->desc->volt_table[reg];
else {
val = 0;
dev_warn(&dev->dev, "chip reported incorrect voltage value."
@@ -436,7 +398,7 @@
}
static struct regulator_ops lp3972_dcdc_ops = {
- .list_voltage = lp3972_dcdc_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.is_enabled = lp3972_dcdc_is_enabled,
.enable = lp3972_dcdc_enable,
.disable = lp3972_dcdc_disable,
@@ -450,6 +412,7 @@
.id = LP3972_LDO1,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo1_voltage_map),
+ .volt_table = ldo1_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -458,6 +421,7 @@
.id = LP3972_LDO2,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo23_voltage_map),
+ .volt_table = ldo23_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -466,6 +430,7 @@
.id = LP3972_LDO3,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo23_voltage_map),
+ .volt_table = ldo23_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -474,6 +439,7 @@
.id = LP3972_LDO4,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo4_voltage_map),
+ .volt_table = ldo4_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -482,6 +448,7 @@
.id = LP3972_LDO5,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo5_voltage_map),
+ .volt_table = ldo5_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -490,6 +457,7 @@
.id = LP3972_DCDC1,
.ops = &lp3972_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck1_voltage_map),
+ .volt_table = buck1_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -498,6 +466,7 @@
.id = LP3972_DCDC2,
.ops = &lp3972_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck23_voltage_map),
+ .volt_table = buck23_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -506,6 +475,7 @@
.id = LP3972_DCDC3,
.ops = &lp3972_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck23_voltage_map),
+ .volt_table = buck23_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c
new file mode 100644
index 0000000..212c38e
--- /dev/null
+++ b/drivers/regulator/lp872x.c
@@ -0,0 +1,943 @@
+/*
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/regulator/lp872x.h>
+#include <linux/regulator/driver.h>
+#include <linux/platform_device.h>
+
+/* Registers : LP8720/8725 shared */
+#define LP872X_GENERAL_CFG 0x00
+#define LP872X_LDO1_VOUT 0x01
+#define LP872X_LDO2_VOUT 0x02
+#define LP872X_LDO3_VOUT 0x03
+#define LP872X_LDO4_VOUT 0x04
+#define LP872X_LDO5_VOUT 0x05
+
+/* Registers : LP8720 */
+#define LP8720_BUCK_VOUT1 0x06
+#define LP8720_BUCK_VOUT2 0x07
+#define LP8720_ENABLE 0x08
+
+/* Registers : LP8725 */
+#define LP8725_LILO1_VOUT 0x06
+#define LP8725_LILO2_VOUT 0x07
+#define LP8725_BUCK1_VOUT1 0x08
+#define LP8725_BUCK1_VOUT2 0x09
+#define LP8725_BUCK2_VOUT1 0x0A
+#define LP8725_BUCK2_VOUT2 0x0B
+#define LP8725_BUCK_CTRL 0x0C
+#define LP8725_LDO_CTRL 0x0D
+
+/* Mask/shift : LP8720/LP8725 shared */
+#define LP872X_VOUT_M 0x1F
+#define LP872X_START_DELAY_M 0xE0
+#define LP872X_START_DELAY_S 5
+#define LP872X_EN_LDO1_M BIT(0)
+#define LP872X_EN_LDO2_M BIT(1)
+#define LP872X_EN_LDO3_M BIT(2)
+#define LP872X_EN_LDO4_M BIT(3)
+#define LP872X_EN_LDO5_M BIT(4)
+
+/* Mask/shift : LP8720 */
+#define LP8720_TIMESTEP_S 0 /* Addr 00h */
+#define LP8720_TIMESTEP_M BIT(0)
+#define LP8720_EXT_DVS_M BIT(2)
+#define LP8720_BUCK_FPWM_S 5 /* Addr 07h */
+#define LP8720_BUCK_FPWM_M BIT(5)
+#define LP8720_EN_BUCK_M BIT(5) /* Addr 08h */
+#define LP8720_DVS_SEL_M BIT(7)
+
+/* Mask/shift : LP8725 */
+#define LP8725_TIMESTEP_M 0xC0 /* Addr 00h */
+#define LP8725_TIMESTEP_S 6
+#define LP8725_BUCK1_EN_M BIT(0)
+#define LP8725_DVS1_M BIT(2)
+#define LP8725_DVS2_M BIT(3)
+#define LP8725_BUCK2_EN_M BIT(4)
+#define LP8725_BUCK_CL_M 0xC0 /* Addr 09h, 0Bh */
+#define LP8725_BUCK_CL_S 6
+#define LP8725_BUCK1_FPWM_S 1 /* Addr 0Ch */
+#define LP8725_BUCK1_FPWM_M BIT(1)
+#define LP8725_BUCK2_FPWM_S 5
+#define LP8725_BUCK2_FPWM_M BIT(5)
+#define LP8725_EN_LILO1_M BIT(5) /* Addr 0Dh */
+#define LP8725_EN_LILO2_M BIT(6)
+
+/* PWM mode */
+#define LP872X_FORCE_PWM 1
+#define LP872X_AUTO_PWM 0
+
+#define LP8720_NUM_REGULATORS 6
+#define LP8725_NUM_REGULATORS 9
+#define EXTERN_DVS_USED 0
+#define MAX_DELAY 6
+
+/* dump registers in regmap-debugfs */
+#define MAX_REGISTERS 0x0F
+
+enum lp872x_id {
+ LP8720,
+ LP8725,
+};
+
+struct lp872x {
+ struct regmap *regmap;
+ struct device *dev;
+ enum lp872x_id chipid;
+ struct lp872x_platform_data *pdata;
+ struct regulator_dev **regulators;
+ int num_regulators;
+ enum lp872x_dvs_state dvs_pin;
+ int dvs_gpio;
+};
+
+/* LP8720/LP8725 shared voltage table for LDOs */
+static const unsigned int lp872x_ldo_vtbl[] = {
+ 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000, 1550000,
+ 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, 1900000, 2000000,
+ 2100000, 2200000, 2300000, 2400000, 2500000, 2600000, 2650000, 2700000,
+ 2750000, 2800000, 2850000, 2900000, 2950000, 3000000, 3100000, 3300000,
+};
+
+/* LP8720 LDO4 voltage table */
+static const unsigned int lp8720_ldo4_vtbl[] = {
+ 800000, 850000, 900000, 1000000, 1100000, 1200000, 1250000, 1300000,
+ 1350000, 1400000, 1450000, 1500000, 1550000, 1600000, 1650000, 1700000,
+ 1750000, 1800000, 1850000, 1900000, 2000000, 2100000, 2200000, 2300000,
+ 2400000, 2500000, 2600000, 2650000, 2700000, 2750000, 2800000, 2850000,
+};
+
+/* LP8725 LILO(Low Input Low Output) voltage table */
+static const unsigned int lp8725_lilo_vtbl[] = {
+ 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000, 1150000,
+ 1200000, 1250000, 1300000, 1350000, 1400000, 1500000, 1600000, 1700000,
+ 1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
+ 2600000, 2700000, 2800000, 2850000, 2900000, 3000000, 3100000, 3300000,
+};
+
+/* LP8720 BUCK voltage table */
+#define EXT_R 0 /* external resistor divider */
+static const unsigned int lp8720_buck_vtbl[] = {
+ EXT_R, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000,
+ 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000,
+ 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, 1900000,
+ 1950000, 2000000, 2050000, 2100000, 2150000, 2200000, 2250000, 2300000,
+};
+
+/* LP8725 BUCK voltage table */
+static const unsigned int lp8725_buck_vtbl[] = {
+ 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000, 1150000,
+ 1200000, 1250000, 1300000, 1350000, 1400000, 1500000, 1600000, 1700000,
+ 1750000, 1800000, 1850000, 1900000, 2000000, 2100000, 2200000, 2300000,
+ 2400000, 2500000, 2600000, 2700000, 2800000, 2850000, 2900000, 3000000,
+};
+
+/* LP8725 BUCK current limit */
+static const unsigned int lp8725_buck_uA[] = {
+ 460000, 780000, 1050000, 1370000,
+};
+
+static int lp872x_read_byte(struct lp872x *lp, u8 addr, u8 *data)
+{
+ int ret;
+ unsigned int val;
+
+ ret = regmap_read(lp->regmap, addr, &val);
+ if (ret < 0) {
+ dev_err(lp->dev, "failed to read 0x%.2x\n", addr);
+ return ret;
+ }
+
+ *data = (u8)val;
+ return 0;
+}
+
+static inline int lp872x_write_byte(struct lp872x *lp, u8 addr, u8 data)
+{
+ return regmap_write(lp->regmap, addr, data);
+}
+
+static inline int lp872x_update_bits(struct lp872x *lp, u8 addr,
+ unsigned int mask, u8 data)
+{
+ return regmap_update_bits(lp->regmap, addr, mask, data);
+}
+
+static int _rdev_to_offset(struct regulator_dev *rdev)
+{
+ enum lp872x_regulator_id id = rdev_get_id(rdev);
+
+ switch (id) {
+ case LP8720_ID_LDO1 ... LP8720_ID_BUCK:
+ return id;
+ case LP8725_ID_LDO1 ... LP8725_ID_BUCK2:
+ return id - LP8725_ID_BASE;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int lp872x_get_timestep_usec(struct lp872x *lp)
+{
+ enum lp872x_id chip = lp->chipid;
+ u8 val, mask, shift;
+ int *time_usec, size, ret;
+ int lp8720_time_usec[] = { 25, 50 };
+ int lp8725_time_usec[] = { 32, 64, 128, 256 };
+
+ switch (chip) {
+ case LP8720:
+ mask = LP8720_TIMESTEP_M;
+ shift = LP8720_TIMESTEP_S;
+ time_usec = &lp8720_time_usec[0];
+ size = ARRAY_SIZE(lp8720_time_usec);
+ break;
+ case LP8725:
+ mask = LP8725_TIMESTEP_M;
+ shift = LP8725_TIMESTEP_S;
+ time_usec = &lp8725_time_usec[0];
+ size = ARRAY_SIZE(lp8725_time_usec);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = lp872x_read_byte(lp, LP872X_GENERAL_CFG, &val);
+ if (ret)
+ return -EINVAL;
+
+ val = (val & mask) >> shift;
+ if (val >= size)
+ return -EINVAL;
+
+ return *(time_usec + val);
+}
+
+static int lp872x_regulator_enable_time(struct regulator_dev *rdev)
+{
+ struct lp872x *lp = rdev_get_drvdata(rdev);
+ enum lp872x_regulator_id regulator = rdev_get_id(rdev);
+ int time_step_us = lp872x_get_timestep_usec(lp);
+ int ret, offset;
+ u8 addr, val;
+
+ if (time_step_us < 0)
+ return -EINVAL;
+
+ switch (regulator) {
+ case LP8720_ID_LDO1 ... LP8720_ID_LDO5:
+ case LP8725_ID_LDO1 ... LP8725_ID_LILO2:
+ offset = _rdev_to_offset(rdev);
+ if (offset < 0)
+ return -EINVAL;
+
+ addr = LP872X_LDO1_VOUT + offset;
+ break;
+ case LP8720_ID_BUCK:
+ addr = LP8720_BUCK_VOUT1;
+ break;
+ case LP8725_ID_BUCK1:
+ addr = LP8725_BUCK1_VOUT1;
+ break;
+ case LP8725_ID_BUCK2:
+ addr = LP8725_BUCK2_VOUT1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = lp872x_read_byte(lp, addr, &val);
+ if (ret)
+ return ret;
+
+ val = (val & LP872X_START_DELAY_M) >> LP872X_START_DELAY_S;
+
+ return val > MAX_DELAY ? 0 : val * time_step_us;
+}
+
+static void lp872x_set_dvs(struct lp872x *lp, int gpio)
+{
+ enum lp872x_dvs_sel dvs_sel = lp->pdata->dvs->vsel;
+ enum lp872x_dvs_state state;
+
+ state = dvs_sel == SEL_V1 ? DVS_HIGH : DVS_LOW;
+ gpio_set_value(gpio, state);
+ lp->dvs_pin = state;
+}
+
+static u8 lp872x_select_buck_vout_addr(struct lp872x *lp,
+ enum lp872x_regulator_id buck)
+{
+ u8 val, addr;
+
+ if (lp872x_read_byte(lp, LP872X_GENERAL_CFG, &val))
+ return 0;
+
+ switch (buck) {
+ case LP8720_ID_BUCK:
+ if (val & LP8720_EXT_DVS_M) {
+ addr = (lp->dvs_pin == DVS_HIGH) ?
+ LP8720_BUCK_VOUT1 : LP8720_BUCK_VOUT2;
+ } else {
+ if (lp872x_read_byte(lp, LP8720_ENABLE, &val))
+ return 0;
+
+ addr = val & LP8720_DVS_SEL_M ?
+ LP8720_BUCK_VOUT1 : LP8720_BUCK_VOUT2;
+ }
+ break;
+ case LP8725_ID_BUCK1:
+ if (val & LP8725_DVS1_M)
+ addr = LP8725_BUCK1_VOUT1;
+ else
+ addr = (lp->dvs_pin == DVS_HIGH) ?
+ LP8725_BUCK1_VOUT1 : LP8725_BUCK1_VOUT2;
+ break;
+ case LP8725_ID_BUCK2:
+ addr = val & LP8725_DVS2_M ?
+ LP8725_BUCK2_VOUT1 : LP8725_BUCK2_VOUT2;
+ break;
+ default:
+ return 0;
+ }
+
+ return addr;
+}
+
+static bool lp872x_is_valid_buck_addr(u8 addr)
+{
+ switch (addr) {
+ case LP8720_BUCK_VOUT1:
+ case LP8720_BUCK_VOUT2:
+ case LP8725_BUCK1_VOUT1:
+ case LP8725_BUCK1_VOUT2:
+ case LP8725_BUCK2_VOUT1:
+ case LP8725_BUCK2_VOUT2:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int lp872x_buck_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct lp872x *lp = rdev_get_drvdata(rdev);
+ enum lp872x_regulator_id buck = rdev_get_id(rdev);
+ u8 addr, mask = LP872X_VOUT_M;
+ struct lp872x_dvs *dvs = lp->pdata->dvs;
+
+ if (dvs && gpio_is_valid(dvs->gpio))
+ lp872x_set_dvs(lp, dvs->gpio);
+
+ addr = lp872x_select_buck_vout_addr(lp, buck);
+ if (!lp872x_is_valid_buck_addr(addr))
+ return -EINVAL;
+
+ return lp872x_update_bits(lp, addr, mask, selector);
+}
+
+static int lp872x_buck_get_voltage_sel(struct regulator_dev *rdev)
+{
+ struct lp872x *lp = rdev_get_drvdata(rdev);
+ enum lp872x_regulator_id buck = rdev_get_id(rdev);
+ u8 addr, val;
+ int ret;
+
+ addr = lp872x_select_buck_vout_addr(lp, buck);
+ if (!lp872x_is_valid_buck_addr(addr))
+ return -EINVAL;
+
+ ret = lp872x_read_byte(lp, addr, &val);
+ if (ret)
+ return ret;
+
+ return val & LP872X_VOUT_M;
+}
+
+static int lp8725_buck_set_current_limit(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ struct lp872x *lp = rdev_get_drvdata(rdev);
+ enum lp872x_regulator_id buck = rdev_get_id(rdev);
+ int i, max = ARRAY_SIZE(lp8725_buck_uA);
+ u8 addr, val;
+
+ switch (buck) {
+ case LP8725_ID_BUCK1:
+ addr = LP8725_BUCK1_VOUT2;
+ break;
+ case LP8725_ID_BUCK2:
+ addr = LP8725_BUCK2_VOUT2;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ for (i = 0 ; i < max ; i++)
+ if (lp8725_buck_uA[i] >= min_uA &&
+ lp8725_buck_uA[i] <= max_uA)
+ break;
+
+ if (i == max)
+ return -EINVAL;
+
+ val = i << LP8725_BUCK_CL_S;
+
+ return lp872x_update_bits(lp, addr, LP8725_BUCK_CL_M, val);
+}
+
+static int lp8725_buck_get_current_limit(struct regulator_dev *rdev)
+{
+ struct lp872x *lp = rdev_get_drvdata(rdev);
+ enum lp872x_regulator_id buck = rdev_get_id(rdev);
+ u8 addr, val;
+ int ret;
+
+ switch (buck) {
+ case LP8725_ID_BUCK1:
+ addr = LP8725_BUCK1_VOUT2;
+ break;
+ case LP8725_ID_BUCK2:
+ addr = LP8725_BUCK2_VOUT2;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = lp872x_read_byte(lp, addr, &val);
+ if (ret)
+ return ret;
+
+ val = (val & LP8725_BUCK_CL_M) >> LP8725_BUCK_CL_S;
+
+ return (val < ARRAY_SIZE(lp8725_buck_uA)) ?
+ lp8725_buck_uA[val] : -EINVAL;
+}
+
+static int lp872x_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ struct lp872x *lp = rdev_get_drvdata(rdev);
+ enum lp872x_regulator_id buck = rdev_get_id(rdev);
+ u8 addr, mask, shift, val;
+
+ switch (buck) {
+ case LP8720_ID_BUCK:
+ addr = LP8720_BUCK_VOUT2;
+ mask = LP8720_BUCK_FPWM_M;
+ shift = LP8720_BUCK_FPWM_S;
+ break;
+ case LP8725_ID_BUCK1:
+ addr = LP8725_BUCK_CTRL;
+ mask = LP8725_BUCK1_FPWM_M;
+ shift = LP8725_BUCK1_FPWM_S;
+ break;
+ case LP8725_ID_BUCK2:
+ addr = LP8725_BUCK_CTRL;
+ mask = LP8725_BUCK2_FPWM_M;
+ shift = LP8725_BUCK2_FPWM_S;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (mode == REGULATOR_MODE_FAST)
+ val = LP872X_FORCE_PWM << shift;
+ else if (mode == REGULATOR_MODE_NORMAL)
+ val = LP872X_AUTO_PWM << shift;
+ else
+ return -EINVAL;
+
+ return lp872x_update_bits(lp, addr, mask, val);
+}
+
+static unsigned int lp872x_buck_get_mode(struct regulator_dev *rdev)
+{
+ struct lp872x *lp = rdev_get_drvdata(rdev);
+ enum lp872x_regulator_id buck = rdev_get_id(rdev);
+ u8 addr, mask, val;
+ int ret;
+
+ switch (buck) {
+ case LP8720_ID_BUCK:
+ addr = LP8720_BUCK_VOUT2;
+ mask = LP8720_BUCK_FPWM_M;
+ break;
+ case LP8725_ID_BUCK1:
+ addr = LP8725_BUCK_CTRL;
+ mask = LP8725_BUCK1_FPWM_M;
+ break;
+ case LP8725_ID_BUCK2:
+ addr = LP8725_BUCK_CTRL;
+ mask = LP8725_BUCK2_FPWM_M;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = lp872x_read_byte(lp, addr, &val);
+ if (ret)
+ return ret;
+
+ return val & mask ? REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
+}
+
+static struct regulator_ops lp872x_ldo_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable_time = lp872x_regulator_enable_time,
+};
+
+static struct regulator_ops lp8720_buck_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .set_voltage_sel = lp872x_buck_set_voltage_sel,
+ .get_voltage_sel = lp872x_buck_get_voltage_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable_time = lp872x_regulator_enable_time,
+ .set_mode = lp872x_buck_set_mode,
+ .get_mode = lp872x_buck_get_mode,
+};
+
+static struct regulator_ops lp8725_buck_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .set_voltage_sel = lp872x_buck_set_voltage_sel,
+ .get_voltage_sel = lp872x_buck_get_voltage_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable_time = lp872x_regulator_enable_time,
+ .set_mode = lp872x_buck_set_mode,
+ .get_mode = lp872x_buck_get_mode,
+ .set_current_limit = lp8725_buck_set_current_limit,
+ .get_current_limit = lp8725_buck_get_current_limit,
+};
+
+static struct regulator_desc lp8720_regulator_desc[] = {
+ {
+ .name = "ldo1",
+ .id = LP8720_ID_LDO1,
+ .ops = &lp872x_ldo_ops,
+ .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl),
+ .volt_table = lp872x_ldo_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP872X_LDO1_VOUT,
+ .vsel_mask = LP872X_VOUT_M,
+ .enable_reg = LP8720_ENABLE,
+ .enable_mask = LP872X_EN_LDO1_M,
+ },
+ {
+ .name = "ldo2",
+ .id = LP8720_ID_LDO2,
+ .ops = &lp872x_ldo_ops,
+ .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl),
+ .volt_table = lp872x_ldo_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP872X_LDO2_VOUT,
+ .vsel_mask = LP872X_VOUT_M,
+ .enable_reg = LP8720_ENABLE,
+ .enable_mask = LP872X_EN_LDO2_M,
+ },
+ {
+ .name = "ldo3",
+ .id = LP8720_ID_LDO3,
+ .ops = &lp872x_ldo_ops,
+ .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl),
+ .volt_table = lp872x_ldo_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP872X_LDO3_VOUT,
+ .vsel_mask = LP872X_VOUT_M,
+ .enable_reg = LP8720_ENABLE,
+ .enable_mask = LP872X_EN_LDO3_M,
+ },
+ {
+ .name = "ldo4",
+ .id = LP8720_ID_LDO4,
+ .ops = &lp872x_ldo_ops,
+ .n_voltages = ARRAY_SIZE(lp8720_ldo4_vtbl),
+ .volt_table = lp8720_ldo4_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP872X_LDO4_VOUT,
+ .vsel_mask = LP872X_VOUT_M,
+ .enable_reg = LP8720_ENABLE,
+ .enable_mask = LP872X_EN_LDO4_M,
+ },
+ {
+ .name = "ldo5",
+ .id = LP8720_ID_LDO5,
+ .ops = &lp872x_ldo_ops,
+ .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl),
+ .volt_table = lp872x_ldo_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP872X_LDO5_VOUT,
+ .vsel_mask = LP872X_VOUT_M,
+ .enable_reg = LP8720_ENABLE,
+ .enable_mask = LP872X_EN_LDO5_M,
+ },
+ {
+ .name = "buck",
+ .id = LP8720_ID_BUCK,
+ .ops = &lp8720_buck_ops,
+ .n_voltages = ARRAY_SIZE(lp8720_buck_vtbl),
+ .volt_table = lp8720_buck_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = LP8720_ENABLE,
+ .enable_mask = LP8720_EN_BUCK_M,
+ },
+};
+
+static struct regulator_desc lp8725_regulator_desc[] = {
+ {
+ .name = "ldo1",
+ .id = LP8725_ID_LDO1,
+ .ops = &lp872x_ldo_ops,
+ .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl),
+ .volt_table = lp872x_ldo_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP872X_LDO1_VOUT,
+ .vsel_mask = LP872X_VOUT_M,
+ .enable_reg = LP8725_LDO_CTRL,
+ .enable_mask = LP872X_EN_LDO1_M,
+ },
+ {
+ .name = "ldo2",
+ .id = LP8725_ID_LDO2,
+ .ops = &lp872x_ldo_ops,
+ .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl),
+ .volt_table = lp872x_ldo_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP872X_LDO2_VOUT,
+ .vsel_mask = LP872X_VOUT_M,
+ .enable_reg = LP8725_LDO_CTRL,
+ .enable_mask = LP872X_EN_LDO2_M,
+ },
+ {
+ .name = "ldo3",
+ .id = LP8725_ID_LDO3,
+ .ops = &lp872x_ldo_ops,
+ .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl),
+ .volt_table = lp872x_ldo_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP872X_LDO3_VOUT,
+ .vsel_mask = LP872X_VOUT_M,
+ .enable_reg = LP8725_LDO_CTRL,
+ .enable_mask = LP872X_EN_LDO3_M,
+ },
+ {
+ .name = "ldo4",
+ .id = LP8725_ID_LDO4,
+ .ops = &lp872x_ldo_ops,
+ .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl),
+ .volt_table = lp872x_ldo_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP872X_LDO4_VOUT,
+ .vsel_mask = LP872X_VOUT_M,
+ .enable_reg = LP8725_LDO_CTRL,
+ .enable_mask = LP872X_EN_LDO4_M,
+ },
+ {
+ .name = "ldo5",
+ .id = LP8725_ID_LDO5,
+ .ops = &lp872x_ldo_ops,
+ .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl),
+ .volt_table = lp872x_ldo_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP872X_LDO5_VOUT,
+ .vsel_mask = LP872X_VOUT_M,
+ .enable_reg = LP8725_LDO_CTRL,
+ .enable_mask = LP872X_EN_LDO5_M,
+ },
+ {
+ .name = "lilo1",
+ .id = LP8725_ID_LILO1,
+ .ops = &lp872x_ldo_ops,
+ .n_voltages = ARRAY_SIZE(lp8725_lilo_vtbl),
+ .volt_table = lp8725_lilo_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8725_LILO1_VOUT,
+ .vsel_mask = LP872X_VOUT_M,
+ .enable_reg = LP8725_LDO_CTRL,
+ .enable_mask = LP8725_EN_LILO1_M,
+ },
+ {
+ .name = "lilo2",
+ .id = LP8725_ID_LILO2,
+ .ops = &lp872x_ldo_ops,
+ .n_voltages = ARRAY_SIZE(lp8725_lilo_vtbl),
+ .volt_table = lp8725_lilo_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8725_LILO2_VOUT,
+ .vsel_mask = LP872X_VOUT_M,
+ .enable_reg = LP8725_LDO_CTRL,
+ .enable_mask = LP8725_EN_LILO2_M,
+ },
+ {
+ .name = "buck1",
+ .id = LP8725_ID_BUCK1,
+ .ops = &lp8725_buck_ops,
+ .n_voltages = ARRAY_SIZE(lp8725_buck_vtbl),
+ .volt_table = lp8725_buck_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = LP872X_GENERAL_CFG,
+ .enable_mask = LP8725_BUCK1_EN_M,
+ },
+ {
+ .name = "buck2",
+ .id = LP8725_ID_BUCK2,
+ .ops = &lp8725_buck_ops,
+ .n_voltages = ARRAY_SIZE(lp8725_buck_vtbl),
+ .volt_table = lp8725_buck_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = LP872X_GENERAL_CFG,
+ .enable_mask = LP8725_BUCK2_EN_M,
+ },
+};
+
+static int lp872x_check_dvs_validity(struct lp872x *lp)
+{
+ struct lp872x_dvs *dvs = lp->pdata->dvs;
+ u8 val = 0;
+ int ret;
+
+ ret = lp872x_read_byte(lp, LP872X_GENERAL_CFG, &val);
+ if (ret)
+ return ret;
+
+ ret = 0;
+ if (lp->chipid == LP8720) {
+ if (val & LP8720_EXT_DVS_M)
+ ret = dvs ? 0 : -EINVAL;
+ } else {
+ if ((val & LP8725_DVS1_M) == EXTERN_DVS_USED)
+ ret = dvs ? 0 : -EINVAL;
+ }
+
+ return ret;
+}
+
+static int lp872x_init_dvs(struct lp872x *lp)
+{
+ int ret, gpio;
+ struct lp872x_dvs *dvs = lp->pdata->dvs;
+ enum lp872x_dvs_state pinstate;
+
+ ret = lp872x_check_dvs_validity(lp);
+ if (ret) {
+ dev_warn(lp->dev, "invalid dvs data: %d\n", ret);
+ return ret;
+ }
+
+ gpio = dvs->gpio;
+ if (!gpio_is_valid(gpio)) {
+ dev_err(lp->dev, "invalid gpio: %d\n", gpio);
+ return -EINVAL;
+ }
+
+ pinstate = dvs->init_state;
+ ret = devm_gpio_request_one(lp->dev, gpio, pinstate, "LP872X DVS");
+ if (ret) {
+ dev_err(lp->dev, "gpio request err: %d\n", ret);
+ return ret;
+ }
+
+ lp->dvs_pin = pinstate;
+ lp->dvs_gpio = gpio;
+
+ return 0;
+}
+
+static int lp872x_config(struct lp872x *lp)
+{
+ struct lp872x_platform_data *pdata = lp->pdata;
+ int ret;
+
+ if (!pdata->update_config)
+ return 0;
+
+ ret = lp872x_write_byte(lp, LP872X_GENERAL_CFG, pdata->general_config);
+ if (ret)
+ return ret;
+
+ return lp872x_init_dvs(lp);
+}
+
+static struct regulator_init_data
+*lp872x_find_regulator_init_data(int id, struct lp872x *lp)
+{
+ int i;
+
+ for (i = 0; i < lp->num_regulators; i++) {
+ if (lp->pdata->regulator_data[i].id == id)
+ return lp->pdata->regulator_data[i].init_data;
+ }
+
+ return NULL;
+}
+
+static int lp872x_regulator_register(struct lp872x *lp)
+{
+ struct regulator_desc *desc;
+ struct regulator_config cfg = { };
+ struct regulator_dev *rdev;
+ int i, ret;
+
+ for (i = 0 ; i < lp->num_regulators ; i++) {
+ desc = (lp->chipid == LP8720) ? &lp8720_regulator_desc[i] :
+ &lp8725_regulator_desc[i];
+
+ cfg.dev = lp->dev;
+ cfg.init_data = lp872x_find_regulator_init_data(desc->id, lp);
+ cfg.driver_data = lp;
+ cfg.regmap = lp->regmap;
+
+ rdev = regulator_register(desc, &cfg);
+ if (IS_ERR(rdev)) {
+ dev_err(lp->dev, "regulator register err");
+ ret = PTR_ERR(rdev);
+ goto err;
+ }
+
+ *(lp->regulators + i) = rdev;
+ }
+
+ return 0;
+err:
+ while (--i >= 0) {
+ rdev = *(lp->regulators + i);
+ regulator_unregister(rdev);
+ }
+ return ret;
+}
+
+static void lp872x_regulator_unregister(struct lp872x *lp)
+{
+ struct regulator_dev *rdev;
+ int i;
+
+ for (i = 0 ; i < lp->num_regulators ; i++) {
+ rdev = *(lp->regulators + i);
+ regulator_unregister(rdev);
+ }
+}
+
+static const struct regmap_config lp872x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX_REGISTERS,
+};
+
+static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
+{
+ struct lp872x *lp;
+ struct lp872x_platform_data *pdata = cl->dev.platform_data;
+ int ret, size, num_regulators;
+ const int lp872x_num_regulators[] = {
+ [LP8720] = LP8720_NUM_REGULATORS,
+ [LP8725] = LP8725_NUM_REGULATORS,
+ };
+
+ if (!pdata) {
+ dev_err(&cl->dev, "no platform data\n");
+ return -EINVAL;
+ }
+
+ lp = devm_kzalloc(&cl->dev, sizeof(struct lp872x), GFP_KERNEL);
+ if (!lp)
+ goto err_mem;
+
+ num_regulators = lp872x_num_regulators[id->driver_data];
+ size = sizeof(struct regulator_dev *) * num_regulators;
+
+ lp->regulators = devm_kzalloc(&cl->dev, size, GFP_KERNEL);
+ if (!lp->regulators)
+ goto err_mem;
+
+ lp->regmap = devm_regmap_init_i2c(cl, &lp872x_regmap_config);
+ if (IS_ERR(lp->regmap)) {
+ ret = PTR_ERR(lp->regmap);
+ dev_err(&cl->dev, "regmap init i2c err: %d\n", ret);
+ goto err_dev;
+ }
+
+ lp->dev = &cl->dev;
+ lp->pdata = pdata;
+ lp->chipid = id->driver_data;
+ lp->num_regulators = num_regulators;
+ i2c_set_clientdata(cl, lp);
+
+ ret = lp872x_config(lp);
+ if (ret)
+ goto err_dev;
+
+ return lp872x_regulator_register(lp);
+
+err_mem:
+ return -ENOMEM;
+err_dev:
+ return ret;
+}
+
+static int __devexit lp872x_remove(struct i2c_client *cl)
+{
+ struct lp872x *lp = i2c_get_clientdata(cl);
+
+ lp872x_regulator_unregister(lp);
+ return 0;
+}
+
+static const struct i2c_device_id lp872x_ids[] = {
+ {"lp8720", LP8720},
+ {"lp8725", LP8725},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lp872x_ids);
+
+static struct i2c_driver lp872x_driver = {
+ .driver = {
+ .name = "lp872x",
+ .owner = THIS_MODULE,
+ },
+ .probe = lp872x_probe,
+ .remove = __devexit_p(lp872x_remove),
+ .id_table = lp872x_ids,
+};
+
+module_i2c_driver(lp872x_driver);
+
+MODULE_DESCRIPTION("TI/National Semiconductor LP872x PMU Regulator Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c
new file mode 100644
index 0000000..6356e82
--- /dev/null
+++ b/drivers/regulator/lp8788-buck.c
@@ -0,0 +1,629 @@
+/*
+ * TI LP8788 MFD - buck regulator driver
+ *
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/mfd/lp8788.h>
+#include <linux/gpio.h>
+
+/* register address */
+#define LP8788_EN_BUCK 0x0C
+#define LP8788_BUCK_DVS_SEL 0x1D
+#define LP8788_BUCK1_VOUT0 0x1E
+#define LP8788_BUCK1_VOUT1 0x1F
+#define LP8788_BUCK1_VOUT2 0x20
+#define LP8788_BUCK1_VOUT3 0x21
+#define LP8788_BUCK2_VOUT0 0x22
+#define LP8788_BUCK2_VOUT1 0x23
+#define LP8788_BUCK2_VOUT2 0x24
+#define LP8788_BUCK2_VOUT3 0x25
+#define LP8788_BUCK3_VOUT 0x26
+#define LP8788_BUCK4_VOUT 0x27
+#define LP8788_BUCK1_TIMESTEP 0x28
+#define LP8788_BUCK_PWM 0x2D
+
+/* mask/shift bits */
+#define LP8788_EN_BUCK1_M BIT(0) /* Addr 0Ch */
+#define LP8788_EN_BUCK2_M BIT(1)
+#define LP8788_EN_BUCK3_M BIT(2)
+#define LP8788_EN_BUCK4_M BIT(3)
+#define LP8788_BUCK1_DVS_SEL_M 0x04 /* Addr 1Dh */
+#define LP8788_BUCK1_DVS_M 0x03
+#define LP8788_BUCK1_DVS_S 0
+#define LP8788_BUCK2_DVS_SEL_M 0x40
+#define LP8788_BUCK2_DVS_M 0x30
+#define LP8788_BUCK2_DVS_S 4
+#define LP8788_BUCK1_DVS_I2C BIT(2)
+#define LP8788_BUCK2_DVS_I2C BIT(6)
+#define LP8788_BUCK1_DVS_PIN (0 << 2)
+#define LP8788_BUCK2_DVS_PIN (0 << 6)
+#define LP8788_VOUT_M 0x1F /* Addr 1Eh ~ 27h */
+#define LP8788_STARTUP_TIME_M 0xF8 /* Addr 28h ~ 2Bh */
+#define LP8788_STARTUP_TIME_S 3
+#define LP8788_FPWM_BUCK1_M BIT(0) /* Addr 2Dh */
+#define LP8788_FPWM_BUCK1_S 0
+#define LP8788_FPWM_BUCK2_M BIT(1)
+#define LP8788_FPWM_BUCK2_S 1
+#define LP8788_FPWM_BUCK3_M BIT(2)
+#define LP8788_FPWM_BUCK3_S 2
+#define LP8788_FPWM_BUCK4_M BIT(3)
+#define LP8788_FPWM_BUCK4_S 3
+
+#define INVALID_ADDR 0xFF
+#define LP8788_FORCE_PWM 1
+#define LP8788_AUTO_PWM 0
+#define PIN_LOW 0
+#define PIN_HIGH 1
+#define ENABLE_TIME_USEC 32
+
+enum lp8788_dvs_state {
+ DVS_LOW = GPIOF_OUT_INIT_LOW,
+ DVS_HIGH = GPIOF_OUT_INIT_HIGH,
+};
+
+enum lp8788_dvs_mode {
+ REGISTER,
+ EXTPIN,
+};
+
+enum lp8788_buck_id {
+ BUCK1,
+ BUCK2,
+ BUCK3,
+ BUCK4,
+};
+
+struct lp8788_pwm_map {
+ u8 mask;
+ u8 shift;
+};
+
+struct lp8788_buck {
+ struct lp8788 *lp;
+ struct regulator_dev *regulator;
+ struct lp8788_pwm_map *pmap;
+ void *dvs;
+};
+
+/* BUCK 1 ~ 4 voltage table */
+static const int lp8788_buck_vtbl[] = {
+ 500000, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000,
+ 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000,
+ 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, 1900000,
+ 1950000, 2000000,
+};
+
+/* buck pwm mode selection : used for set/get_mode in regulator ops
+ * @forced pwm : fast mode
+ * @auto pwm : normal mode
+ */
+static struct lp8788_pwm_map buck_pmap[] = {
+ [BUCK1] = {
+ .mask = LP8788_FPWM_BUCK1_M,
+ .shift = LP8788_FPWM_BUCK1_S,
+ },
+ [BUCK2] = {
+ .mask = LP8788_FPWM_BUCK2_M,
+ .shift = LP8788_FPWM_BUCK2_S,
+ },
+ [BUCK3] = {
+ .mask = LP8788_FPWM_BUCK3_M,
+ .shift = LP8788_FPWM_BUCK3_S,
+ },
+ [BUCK4] = {
+ .mask = LP8788_FPWM_BUCK4_M,
+ .shift = LP8788_FPWM_BUCK4_S,
+ },
+};
+
+static const u8 buck1_vout_addr[] = {
+ LP8788_BUCK1_VOUT0, LP8788_BUCK1_VOUT1,
+ LP8788_BUCK1_VOUT2, LP8788_BUCK1_VOUT3,
+};
+
+static const u8 buck2_vout_addr[] = {
+ LP8788_BUCK2_VOUT0, LP8788_BUCK2_VOUT1,
+ LP8788_BUCK2_VOUT2, LP8788_BUCK2_VOUT3,
+};
+
+static void lp8788_buck1_set_dvs(struct lp8788_buck *buck)
+{
+ struct lp8788_buck1_dvs *dvs = (struct lp8788_buck1_dvs *)buck->dvs;
+ enum lp8788_dvs_state pinstate;
+
+ if (!dvs)
+ return;
+
+ pinstate = dvs->vsel == DVS_SEL_V0 ? DVS_LOW : DVS_HIGH;
+ if (gpio_is_valid(dvs->gpio))
+ gpio_set_value(dvs->gpio, pinstate);
+}
+
+static void lp8788_buck2_set_dvs(struct lp8788_buck *buck)
+{
+ struct lp8788_buck2_dvs *dvs = (struct lp8788_buck2_dvs *)buck->dvs;
+ enum lp8788_dvs_state pin1, pin2;
+
+ if (!dvs)
+ return;
+
+ switch (dvs->vsel) {
+ case DVS_SEL_V0:
+ pin1 = DVS_LOW;
+ pin2 = DVS_LOW;
+ break;
+ case DVS_SEL_V1:
+ pin1 = DVS_HIGH;
+ pin2 = DVS_LOW;
+ break;
+ case DVS_SEL_V2:
+ pin1 = DVS_LOW;
+ pin2 = DVS_HIGH;
+ break;
+ case DVS_SEL_V3:
+ pin1 = DVS_HIGH;
+ pin2 = DVS_HIGH;
+ break;
+ default:
+ return;
+ }
+
+ if (gpio_is_valid(dvs->gpio[0]))
+ gpio_set_value(dvs->gpio[0], pin1);
+
+ if (gpio_is_valid(dvs->gpio[1]))
+ gpio_set_value(dvs->gpio[1], pin2);
+}
+
+static void lp8788_set_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id)
+{
+ switch (id) {
+ case BUCK1:
+ lp8788_buck1_set_dvs(buck);
+ break;
+ case BUCK2:
+ lp8788_buck2_set_dvs(buck);
+ break;
+ default:
+ break;
+ }
+}
+
+static enum lp8788_dvs_mode
+lp8788_get_buck_dvs_ctrl_mode(struct lp8788_buck *buck, enum lp8788_buck_id id)
+{
+ u8 val, mask;
+
+ switch (id) {
+ case BUCK1:
+ mask = LP8788_BUCK1_DVS_SEL_M;
+ break;
+ case BUCK2:
+ mask = LP8788_BUCK2_DVS_SEL_M;
+ break;
+ default:
+ return REGISTER;
+ }
+
+ lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
+
+ return val & mask ? REGISTER : EXTPIN;
+}
+
+static bool lp8788_is_valid_buck_addr(u8 addr)
+{
+ switch (addr) {
+ case LP8788_BUCK1_VOUT0:
+ case LP8788_BUCK1_VOUT1:
+ case LP8788_BUCK1_VOUT2:
+ case LP8788_BUCK1_VOUT3:
+ case LP8788_BUCK2_VOUT0:
+ case LP8788_BUCK2_VOUT1:
+ case LP8788_BUCK2_VOUT2:
+ case LP8788_BUCK2_VOUT3:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static u8 lp8788_select_buck_vout_addr(struct lp8788_buck *buck,
+ enum lp8788_buck_id id)
+{
+ enum lp8788_dvs_mode mode = lp8788_get_buck_dvs_ctrl_mode(buck, id);
+ struct lp8788_buck1_dvs *b1_dvs;
+ struct lp8788_buck2_dvs *b2_dvs;
+ u8 val, idx, addr;
+ int pin1, pin2;
+
+ switch (id) {
+ case BUCK1:
+ if (mode == EXTPIN) {
+ b1_dvs = (struct lp8788_buck1_dvs *)buck->dvs;
+ if (!b1_dvs)
+ goto err;
+
+ idx = gpio_get_value(b1_dvs->gpio) ? 1 : 0;
+ } else {
+ lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
+ idx = (val & LP8788_BUCK1_DVS_M) >> LP8788_BUCK1_DVS_S;
+ }
+ addr = buck1_vout_addr[idx];
+ break;
+ case BUCK2:
+ if (mode == EXTPIN) {
+ b2_dvs = (struct lp8788_buck2_dvs *)buck->dvs;
+ if (!b2_dvs)
+ goto err;
+
+ pin1 = gpio_get_value(b2_dvs->gpio[0]);
+ pin2 = gpio_get_value(b2_dvs->gpio[1]);
+
+ if (pin1 == PIN_LOW && pin2 == PIN_LOW)
+ idx = 0;
+ else if (pin1 == PIN_LOW && pin2 == PIN_HIGH)
+ idx = 2;
+ else if (pin1 == PIN_HIGH && pin2 == PIN_LOW)
+ idx = 1;
+ else
+ idx = 3;
+ } else {
+ lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
+ idx = (val & LP8788_BUCK2_DVS_M) >> LP8788_BUCK2_DVS_S;
+ }
+ addr = buck2_vout_addr[idx];
+ break;
+ default:
+ goto err;
+ }
+
+ return addr;
+err:
+ return INVALID_ADDR;
+}
+
+static int lp8788_buck12_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct lp8788_buck *buck = rdev_get_drvdata(rdev);
+ enum lp8788_buck_id id = rdev_get_id(rdev);
+ u8 addr;
+
+ if (buck->dvs)
+ lp8788_set_dvs(buck, id);
+
+ addr = lp8788_select_buck_vout_addr(buck, id);
+ if (!lp8788_is_valid_buck_addr(addr))
+ return -EINVAL;
+
+ return lp8788_update_bits(buck->lp, addr, LP8788_VOUT_M, selector);
+}
+
+static int lp8788_buck12_get_voltage_sel(struct regulator_dev *rdev)
+{
+ struct lp8788_buck *buck = rdev_get_drvdata(rdev);
+ enum lp8788_buck_id id = rdev_get_id(rdev);
+ int ret;
+ u8 val, addr;
+
+ addr = lp8788_select_buck_vout_addr(buck, id);
+ if (!lp8788_is_valid_buck_addr(addr))
+ return -EINVAL;
+
+ ret = lp8788_read_byte(buck->lp, addr, &val);
+ if (ret)
+ return ret;
+
+ return val & LP8788_VOUT_M;
+}
+
+static int lp8788_buck_enable_time(struct regulator_dev *rdev)
+{
+ struct lp8788_buck *buck = rdev_get_drvdata(rdev);
+ enum lp8788_buck_id id = rdev_get_id(rdev);
+ u8 val, addr = LP8788_BUCK1_TIMESTEP + id;
+
+ if (lp8788_read_byte(buck->lp, addr, &val))
+ return -EINVAL;
+
+ val = (val & LP8788_STARTUP_TIME_M) >> LP8788_STARTUP_TIME_S;
+
+ return ENABLE_TIME_USEC * val;
+}
+
+static int lp8788_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ struct lp8788_buck *buck = rdev_get_drvdata(rdev);
+ struct lp8788_pwm_map *pmap = buck->pmap;
+ u8 val;
+
+ if (!pmap)
+ return -EINVAL;
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ val = LP8788_FORCE_PWM << pmap->shift;
+ break;
+ case REGULATOR_MODE_NORMAL:
+ val = LP8788_AUTO_PWM << pmap->shift;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return lp8788_update_bits(buck->lp, LP8788_BUCK_PWM, pmap->mask, val);
+}
+
+static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev)
+{
+ struct lp8788_buck *buck = rdev_get_drvdata(rdev);
+ struct lp8788_pwm_map *pmap = buck->pmap;
+ u8 val;
+ int ret;
+
+ if (!pmap)
+ return -EINVAL;
+
+ ret = lp8788_read_byte(buck->lp, LP8788_BUCK_PWM, &val);
+ if (ret)
+ return ret;
+
+ return val & pmap->mask ? REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
+}
+
+static struct regulator_ops lp8788_buck12_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .set_voltage_sel = lp8788_buck12_set_voltage_sel,
+ .get_voltage_sel = lp8788_buck12_get_voltage_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable_time = lp8788_buck_enable_time,
+ .set_mode = lp8788_buck_set_mode,
+ .get_mode = lp8788_buck_get_mode,
+};
+
+static struct regulator_ops lp8788_buck34_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable_time = lp8788_buck_enable_time,
+ .set_mode = lp8788_buck_set_mode,
+ .get_mode = lp8788_buck_get_mode,
+};
+
+static struct regulator_desc lp8788_buck_desc[] = {
+ {
+ .name = "buck1",
+ .id = BUCK1,
+ .ops = &lp8788_buck12_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl),
+ .volt_table = lp8788_buck_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = LP8788_EN_BUCK,
+ .enable_mask = LP8788_EN_BUCK1_M,
+ },
+ {
+ .name = "buck2",
+ .id = BUCK2,
+ .ops = &lp8788_buck12_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl),
+ .volt_table = lp8788_buck_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = LP8788_EN_BUCK,
+ .enable_mask = LP8788_EN_BUCK2_M,
+ },
+ {
+ .name = "buck3",
+ .id = BUCK3,
+ .ops = &lp8788_buck34_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl),
+ .volt_table = lp8788_buck_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8788_BUCK3_VOUT,
+ .vsel_mask = LP8788_VOUT_M,
+ .enable_reg = LP8788_EN_BUCK,
+ .enable_mask = LP8788_EN_BUCK3_M,
+ },
+ {
+ .name = "buck4",
+ .id = BUCK4,
+ .ops = &lp8788_buck34_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl),
+ .volt_table = lp8788_buck_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8788_BUCK4_VOUT,
+ .vsel_mask = LP8788_VOUT_M,
+ .enable_reg = LP8788_EN_BUCK,
+ .enable_mask = LP8788_EN_BUCK4_M,
+ },
+};
+
+static int lp8788_set_default_dvs_ctrl_mode(struct lp8788 *lp,
+ enum lp8788_buck_id id)
+{
+ u8 mask, val;
+
+ switch (id) {
+ case BUCK1:
+ mask = LP8788_BUCK1_DVS_SEL_M;
+ val = LP8788_BUCK1_DVS_I2C;
+ break;
+ case BUCK2:
+ mask = LP8788_BUCK2_DVS_SEL_M;
+ val = LP8788_BUCK2_DVS_I2C;
+ break;
+ default:
+ return 0;
+ }
+
+ return lp8788_update_bits(lp, LP8788_BUCK_DVS_SEL, mask, val);
+}
+
+static int _gpio_request(struct lp8788_buck *buck, int gpio, char *name)
+{
+ struct device *dev = buck->lp->dev;
+
+ if (!gpio_is_valid(gpio)) {
+ dev_err(dev, "invalid gpio: %d\n", gpio);
+ return -EINVAL;
+ }
+
+ return devm_gpio_request_one(dev, gpio, DVS_LOW, name);
+}
+
+static int lp8788_dvs_gpio_request(struct lp8788_buck *buck,
+ enum lp8788_buck_id id)
+{
+ struct lp8788_platform_data *pdata = buck->lp->pdata;
+ char *b1_name = "LP8788_B1_DVS";
+ char *b2_name[] = { "LP8788_B2_DVS1", "LP8788_B2_DVS2" };
+ int i, gpio, ret;
+
+ switch (id) {
+ case BUCK1:
+ gpio = pdata->buck1_dvs->gpio;
+ ret = _gpio_request(buck, gpio, b1_name);
+ if (ret)
+ return ret;
+
+ buck->dvs = pdata->buck1_dvs;
+ break;
+ case BUCK2:
+ for (i = 0 ; i < LP8788_NUM_BUCK2_DVS ; i++) {
+ gpio = pdata->buck2_dvs->gpio[i];
+ ret = _gpio_request(buck, gpio, b2_name[i]);
+ if (ret)
+ return ret;
+ }
+ buck->dvs = pdata->buck2_dvs;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int lp8788_init_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id)
+{
+ struct lp8788_platform_data *pdata = buck->lp->pdata;
+ u8 mask[] = { LP8788_BUCK1_DVS_SEL_M, LP8788_BUCK2_DVS_SEL_M };
+ u8 val[] = { LP8788_BUCK1_DVS_PIN, LP8788_BUCK2_DVS_PIN };
+
+ /* no dvs for buck3, 4 */
+ if (id == BUCK3 || id == BUCK4)
+ return 0;
+
+ /* no dvs platform data, then dvs will be selected by I2C registers */
+ if (!pdata)
+ goto set_default_dvs_mode;
+
+ if ((id == BUCK1 && !pdata->buck1_dvs) ||
+ (id == BUCK2 && !pdata->buck2_dvs))
+ goto set_default_dvs_mode;
+
+ if (lp8788_dvs_gpio_request(buck, id))
+ goto set_default_dvs_mode;
+
+ return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id],
+ val[id]);
+
+set_default_dvs_mode:
+ return lp8788_set_default_dvs_ctrl_mode(buck->lp, id);
+}
+
+static __devinit int lp8788_buck_probe(struct platform_device *pdev)
+{
+ struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
+ int id = pdev->id;
+ struct lp8788_buck *buck;
+ struct regulator_config cfg = { };
+ struct regulator_dev *rdev;
+ int ret;
+
+ buck = devm_kzalloc(lp->dev, sizeof(struct lp8788_buck), GFP_KERNEL);
+ if (!buck)
+ return -ENOMEM;
+
+ buck->lp = lp;
+ buck->pmap = &buck_pmap[id];
+
+ ret = lp8788_init_dvs(buck, id);
+ if (ret)
+ return ret;
+
+ cfg.dev = lp->dev;
+ cfg.init_data = lp->pdata ? lp->pdata->buck_data[id] : NULL;
+ cfg.driver_data = buck;
+ cfg.regmap = lp->regmap;
+
+ rdev = regulator_register(&lp8788_buck_desc[id], &cfg);
+ if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
+ dev_err(lp->dev, "BUCK%d regulator register err = %d\n",
+ id + 1, ret);
+ return ret;
+ }
+
+ buck->regulator = rdev;
+ platform_set_drvdata(pdev, buck);
+
+ return 0;
+}
+
+static int __devexit lp8788_buck_remove(struct platform_device *pdev)
+{
+ struct lp8788_buck *buck = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ regulator_unregister(buck->regulator);
+
+ return 0;
+}
+
+static struct platform_driver lp8788_buck_driver = {
+ .probe = lp8788_buck_probe,
+ .remove = __devexit_p(lp8788_buck_remove),
+ .driver = {
+ .name = LP8788_DEV_BUCK,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init lp8788_buck_init(void)
+{
+ return platform_driver_register(&lp8788_buck_driver);
+}
+subsys_initcall(lp8788_buck_init);
+
+static void __exit lp8788_buck_exit(void)
+{
+ platform_driver_unregister(&lp8788_buck_driver);
+}
+module_exit(lp8788_buck_exit);
+
+MODULE_DESCRIPTION("TI LP8788 BUCK Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lp8788-buck");
diff --git a/drivers/regulator/lp8788-ldo.c b/drivers/regulator/lp8788-ldo.c
new file mode 100644
index 0000000..d2122e4
--- /dev/null
+++ b/drivers/regulator/lp8788-ldo.c
@@ -0,0 +1,842 @@
+/*
+ * TI LP8788 MFD - ldo regulator driver
+ *
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/gpio.h>
+#include <linux/mfd/lp8788.h>
+
+/* register address */
+#define LP8788_EN_LDO_A 0x0D /* DLDO 1 ~ 8 */
+#define LP8788_EN_LDO_B 0x0E /* DLDO 9 ~ 12, ALDO 1 ~ 4 */
+#define LP8788_EN_LDO_C 0x0F /* ALDO 5 ~ 10 */
+#define LP8788_EN_SEL 0x10
+#define LP8788_DLDO1_VOUT 0x2E
+#define LP8788_DLDO2_VOUT 0x2F
+#define LP8788_DLDO3_VOUT 0x30
+#define LP8788_DLDO4_VOUT 0x31
+#define LP8788_DLDO5_VOUT 0x32
+#define LP8788_DLDO6_VOUT 0x33
+#define LP8788_DLDO7_VOUT 0x34
+#define LP8788_DLDO8_VOUT 0x35
+#define LP8788_DLDO9_VOUT 0x36
+#define LP8788_DLDO10_VOUT 0x37
+#define LP8788_DLDO11_VOUT 0x38
+#define LP8788_DLDO12_VOUT 0x39
+#define LP8788_ALDO1_VOUT 0x3A
+#define LP8788_ALDO2_VOUT 0x3B
+#define LP8788_ALDO3_VOUT 0x3C
+#define LP8788_ALDO4_VOUT 0x3D
+#define LP8788_ALDO5_VOUT 0x3E
+#define LP8788_ALDO6_VOUT 0x3F
+#define LP8788_ALDO7_VOUT 0x40
+#define LP8788_ALDO8_VOUT 0x41
+#define LP8788_ALDO9_VOUT 0x42
+#define LP8788_ALDO10_VOUT 0x43
+#define LP8788_DLDO1_TIMESTEP 0x44
+
+/* mask/shift bits */
+#define LP8788_EN_DLDO1_M BIT(0) /* Addr 0Dh ~ 0Fh */
+#define LP8788_EN_DLDO2_M BIT(1)
+#define LP8788_EN_DLDO3_M BIT(2)
+#define LP8788_EN_DLDO4_M BIT(3)
+#define LP8788_EN_DLDO5_M BIT(4)
+#define LP8788_EN_DLDO6_M BIT(5)
+#define LP8788_EN_DLDO7_M BIT(6)
+#define LP8788_EN_DLDO8_M BIT(7)
+#define LP8788_EN_DLDO9_M BIT(0)
+#define LP8788_EN_DLDO10_M BIT(1)
+#define LP8788_EN_DLDO11_M BIT(2)
+#define LP8788_EN_DLDO12_M BIT(3)
+#define LP8788_EN_ALDO1_M BIT(4)
+#define LP8788_EN_ALDO2_M BIT(5)
+#define LP8788_EN_ALDO3_M BIT(6)
+#define LP8788_EN_ALDO4_M BIT(7)
+#define LP8788_EN_ALDO5_M BIT(0)
+#define LP8788_EN_ALDO6_M BIT(1)
+#define LP8788_EN_ALDO7_M BIT(2)
+#define LP8788_EN_ALDO8_M BIT(3)
+#define LP8788_EN_ALDO9_M BIT(4)
+#define LP8788_EN_ALDO10_M BIT(5)
+#define LP8788_EN_SEL_DLDO911_M BIT(0) /* Addr 10h */
+#define LP8788_EN_SEL_DLDO7_M BIT(1)
+#define LP8788_EN_SEL_ALDO7_M BIT(2)
+#define LP8788_EN_SEL_ALDO5_M BIT(3)
+#define LP8788_EN_SEL_ALDO234_M BIT(4)
+#define LP8788_EN_SEL_ALDO1_M BIT(5)
+#define LP8788_VOUT_5BIT_M 0x1F /* Addr 2Eh ~ 43h */
+#define LP8788_VOUT_4BIT_M 0x0F
+#define LP8788_VOUT_3BIT_M 0x07
+#define LP8788_VOUT_1BIT_M 0x01
+#define LP8788_STARTUP_TIME_M 0xF8 /* Addr 44h ~ 59h */
+#define LP8788_STARTUP_TIME_S 3
+
+#define ENABLE_TIME_USEC 32
+#define ENABLE GPIOF_OUT_INIT_HIGH
+#define DISABLE GPIOF_OUT_INIT_LOW
+
+enum lp8788_enable_mode {
+ REGISTER,
+ EXTPIN,
+};
+
+enum lp8788_ldo_id {
+ DLDO1,
+ DLDO2,
+ DLDO3,
+ DLDO4,
+ DLDO5,
+ DLDO6,
+ DLDO7,
+ DLDO8,
+ DLDO9,
+ DLDO10,
+ DLDO11,
+ DLDO12,
+ ALDO1,
+ ALDO2,
+ ALDO3,
+ ALDO4,
+ ALDO5,
+ ALDO6,
+ ALDO7,
+ ALDO8,
+ ALDO9,
+ ALDO10,
+};
+
+struct lp8788_ldo {
+ struct lp8788 *lp;
+ struct regulator_desc *desc;
+ struct regulator_dev *regulator;
+ struct lp8788_ldo_enable_pin *en_pin;
+};
+
+/* DLDO 1, 2, 3, 9 voltage table */
+const int lp8788_dldo1239_vtbl[] = {
+ 1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
+ 2600000, 2700000, 2800000, 2900000, 3000000, 2850000, 2850000, 2850000,
+ 2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000,
+ 2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000,
+};
+
+/* DLDO 4 voltage table */
+static const int lp8788_dldo4_vtbl[] = { 1800000, 3000000 };
+
+/* DLDO 5, 7, 8 and ALDO 6 voltage table */
+static const int lp8788_dldo578_aldo6_vtbl[] = {
+ 1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
+ 2600000, 2700000, 2800000, 2900000, 3000000, 3000000, 3000000, 3000000,
+};
+
+/* DLDO 6 voltage table */
+static const int lp8788_dldo6_vtbl[] = {
+ 3000000, 3100000, 3200000, 3300000, 3400000, 3500000, 3600000, 3600000,
+};
+
+/* DLDO 10, 11 voltage table */
+static const int lp8788_dldo1011_vtbl[] = {
+ 1100000, 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000,
+ 1500000, 1500000, 1500000, 1500000, 1500000, 1500000, 1500000, 1500000,
+};
+
+/* ALDO 1 voltage table */
+static const int lp8788_aldo1_vtbl[] = { 1800000, 2850000 };
+
+/* ALDO 7 voltage table */
+static const int lp8788_aldo7_vtbl[] = {
+ 1200000, 1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1800000,
+};
+
+static enum lp8788_ldo_id lp8788_dldo_id[] = {
+ DLDO1,
+ DLDO2,
+ DLDO3,
+ DLDO4,
+ DLDO5,
+ DLDO6,
+ DLDO7,
+ DLDO8,
+ DLDO9,
+ DLDO10,
+ DLDO11,
+ DLDO12,
+};
+
+static enum lp8788_ldo_id lp8788_aldo_id[] = {
+ ALDO1,
+ ALDO2,
+ ALDO3,
+ ALDO4,
+ ALDO5,
+ ALDO6,
+ ALDO7,
+ ALDO8,
+ ALDO9,
+ ALDO10,
+};
+
+/* DLDO 7, 9 and 11, ALDO 1 ~ 5 and 7
+ : can be enabled either by external pin or by i2c register */
+static enum lp8788_enable_mode
+lp8788_get_ldo_enable_mode(struct lp8788_ldo *ldo, enum lp8788_ldo_id id)
+{
+ int ret;
+ u8 val, mask;
+
+ ret = lp8788_read_byte(ldo->lp, LP8788_EN_SEL, &val);
+ if (ret)
+ return ret;
+
+ switch (id) {
+ case DLDO7:
+ mask = LP8788_EN_SEL_DLDO7_M;
+ break;
+ case DLDO9:
+ case DLDO11:
+ mask = LP8788_EN_SEL_DLDO911_M;
+ break;
+ case ALDO1:
+ mask = LP8788_EN_SEL_ALDO1_M;
+ break;
+ case ALDO2 ... ALDO4:
+ mask = LP8788_EN_SEL_ALDO234_M;
+ break;
+ case ALDO5:
+ mask = LP8788_EN_SEL_ALDO5_M;
+ break;
+ case ALDO7:
+ mask = LP8788_EN_SEL_ALDO7_M;
+ break;
+ default:
+ return REGISTER;
+ }
+
+ return val & mask ? EXTPIN : REGISTER;
+}
+
+static int lp8788_ldo_ctrl_by_extern_pin(struct lp8788_ldo *ldo, int pinstate)
+{
+ struct lp8788_ldo_enable_pin *pin = ldo->en_pin;
+
+ if (!pin)
+ return -EINVAL;
+
+ if (gpio_is_valid(pin->gpio))
+ gpio_set_value(pin->gpio, pinstate);
+
+ return 0;
+}
+
+static int lp8788_ldo_is_enabled_by_extern_pin(struct lp8788_ldo *ldo)
+{
+ struct lp8788_ldo_enable_pin *pin = ldo->en_pin;
+
+ if (!pin)
+ return -EINVAL;
+
+ return gpio_get_value(pin->gpio) ? 1 : 0;
+}
+
+static int lp8788_ldo_enable(struct regulator_dev *rdev)
+{
+ struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
+ enum lp8788_ldo_id id = rdev_get_id(rdev);
+ enum lp8788_enable_mode mode = lp8788_get_ldo_enable_mode(ldo, id);
+
+ switch (mode) {
+ case EXTPIN:
+ return lp8788_ldo_ctrl_by_extern_pin(ldo, ENABLE);
+ case REGISTER:
+ return regulator_enable_regmap(rdev);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int lp8788_ldo_disable(struct regulator_dev *rdev)
+{
+ struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
+ enum lp8788_ldo_id id = rdev_get_id(rdev);
+ enum lp8788_enable_mode mode = lp8788_get_ldo_enable_mode(ldo, id);
+
+ switch (mode) {
+ case EXTPIN:
+ return lp8788_ldo_ctrl_by_extern_pin(ldo, DISABLE);
+ case REGISTER:
+ return regulator_disable_regmap(rdev);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int lp8788_ldo_is_enabled(struct regulator_dev *rdev)
+{
+ struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
+ enum lp8788_ldo_id id = rdev_get_id(rdev);
+ enum lp8788_enable_mode mode = lp8788_get_ldo_enable_mode(ldo, id);
+
+ switch (mode) {
+ case EXTPIN:
+ return lp8788_ldo_is_enabled_by_extern_pin(ldo);
+ case REGISTER:
+ return regulator_is_enabled_regmap(rdev);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int lp8788_ldo_enable_time(struct regulator_dev *rdev)
+{
+ struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
+ enum lp8788_ldo_id id = rdev_get_id(rdev);
+ u8 val, addr = LP8788_DLDO1_TIMESTEP + id;
+
+ if (lp8788_read_byte(ldo->lp, addr, &val))
+ return -EINVAL;
+
+ val = (val & LP8788_STARTUP_TIME_M) >> LP8788_STARTUP_TIME_S;
+
+ return ENABLE_TIME_USEC * val;
+}
+
+static int lp8788_ldo_fixed_get_voltage(struct regulator_dev *rdev)
+{
+ enum lp8788_ldo_id id = rdev_get_id(rdev);
+
+ switch (id) {
+ case ALDO2 ... ALDO5:
+ return 2850000;
+ case DLDO12:
+ case ALDO8 ... ALDO9:
+ return 2500000;
+ case ALDO10:
+ return 1100000;
+ default:
+ return -EINVAL;
+ }
+}
+
+static struct regulator_ops lp8788_ldo_voltage_table_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .enable = lp8788_ldo_enable,
+ .disable = lp8788_ldo_disable,
+ .is_enabled = lp8788_ldo_is_enabled,
+ .enable_time = lp8788_ldo_enable_time,
+};
+
+static struct regulator_ops lp8788_ldo_voltage_fixed_ops = {
+ .get_voltage = lp8788_ldo_fixed_get_voltage,
+ .enable = lp8788_ldo_enable,
+ .disable = lp8788_ldo_disable,
+ .is_enabled = lp8788_ldo_is_enabled,
+ .enable_time = lp8788_ldo_enable_time,
+};
+
+static struct regulator_desc lp8788_dldo_desc[] = {
+ {
+ .name = "dldo1",
+ .id = DLDO1,
+ .ops = &lp8788_ldo_voltage_table_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
+ .volt_table = lp8788_dldo1239_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8788_DLDO1_VOUT,
+ .vsel_mask = LP8788_VOUT_5BIT_M,
+ .enable_reg = LP8788_EN_LDO_A,
+ .enable_mask = LP8788_EN_DLDO1_M,
+ },
+ {
+ .name = "dldo2",
+ .id = DLDO2,
+ .ops = &lp8788_ldo_voltage_table_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
+ .volt_table = lp8788_dldo1239_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8788_DLDO2_VOUT,
+ .vsel_mask = LP8788_VOUT_5BIT_M,
+ .enable_reg = LP8788_EN_LDO_A,
+ .enable_mask = LP8788_EN_DLDO2_M,
+ },
+ {
+ .name = "dldo3",
+ .id = DLDO3,
+ .ops = &lp8788_ldo_voltage_table_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
+ .volt_table = lp8788_dldo1239_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8788_DLDO3_VOUT,
+ .vsel_mask = LP8788_VOUT_5BIT_M,
+ .enable_reg = LP8788_EN_LDO_A,
+ .enable_mask = LP8788_EN_DLDO3_M,
+ },
+ {
+ .name = "dldo4",
+ .id = DLDO4,
+ .ops = &lp8788_ldo_voltage_table_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_dldo4_vtbl),
+ .volt_table = lp8788_dldo4_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8788_DLDO4_VOUT,
+ .vsel_mask = LP8788_VOUT_1BIT_M,
+ .enable_reg = LP8788_EN_LDO_A,
+ .enable_mask = LP8788_EN_DLDO4_M,
+ },
+ {
+ .name = "dldo5",
+ .id = DLDO5,
+ .ops = &lp8788_ldo_voltage_table_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
+ .volt_table = lp8788_dldo578_aldo6_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8788_DLDO5_VOUT,
+ .vsel_mask = LP8788_VOUT_4BIT_M,
+ .enable_reg = LP8788_EN_LDO_A,
+ .enable_mask = LP8788_EN_DLDO5_M,
+ },
+ {
+ .name = "dldo6",
+ .id = DLDO6,
+ .ops = &lp8788_ldo_voltage_table_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_dldo6_vtbl),
+ .volt_table = lp8788_dldo6_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8788_DLDO6_VOUT,
+ .vsel_mask = LP8788_VOUT_3BIT_M,
+ .enable_reg = LP8788_EN_LDO_A,
+ .enable_mask = LP8788_EN_DLDO6_M,
+ },
+ {
+ .name = "dldo7",
+ .id = DLDO7,
+ .ops = &lp8788_ldo_voltage_table_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
+ .volt_table = lp8788_dldo578_aldo6_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8788_DLDO7_VOUT,
+ .vsel_mask = LP8788_VOUT_4BIT_M,
+ .enable_reg = LP8788_EN_LDO_A,
+ .enable_mask = LP8788_EN_DLDO7_M,
+ },
+ {
+ .name = "dldo8",
+ .id = DLDO8,
+ .ops = &lp8788_ldo_voltage_table_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
+ .volt_table = lp8788_dldo578_aldo6_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8788_DLDO8_VOUT,
+ .vsel_mask = LP8788_VOUT_4BIT_M,
+ .enable_reg = LP8788_EN_LDO_A,
+ .enable_mask = LP8788_EN_DLDO8_M,
+ },
+ {
+ .name = "dldo9",
+ .id = DLDO9,
+ .ops = &lp8788_ldo_voltage_table_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
+ .volt_table = lp8788_dldo1239_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8788_DLDO9_VOUT,
+ .vsel_mask = LP8788_VOUT_5BIT_M,
+ .enable_reg = LP8788_EN_LDO_B,
+ .enable_mask = LP8788_EN_DLDO9_M,
+ },
+ {
+ .name = "dldo10",
+ .id = DLDO10,
+ .ops = &lp8788_ldo_voltage_table_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_dldo1011_vtbl),
+ .volt_table = lp8788_dldo1011_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8788_DLDO10_VOUT,
+ .vsel_mask = LP8788_VOUT_4BIT_M,
+ .enable_reg = LP8788_EN_LDO_B,
+ .enable_mask = LP8788_EN_DLDO10_M,
+ },
+ {
+ .name = "dldo11",
+ .id = DLDO11,
+ .ops = &lp8788_ldo_voltage_table_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_dldo1011_vtbl),
+ .volt_table = lp8788_dldo1011_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8788_DLDO11_VOUT,
+ .vsel_mask = LP8788_VOUT_4BIT_M,
+ .enable_reg = LP8788_EN_LDO_B,
+ .enable_mask = LP8788_EN_DLDO11_M,
+ },
+ {
+ .name = "dldo12",
+ .id = DLDO12,
+ .ops = &lp8788_ldo_voltage_fixed_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = LP8788_EN_LDO_B,
+ .enable_mask = LP8788_EN_DLDO12_M,
+ },
+};
+
+static struct regulator_desc lp8788_aldo_desc[] = {
+ {
+ .name = "aldo1",
+ .id = ALDO1,
+ .ops = &lp8788_ldo_voltage_table_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_aldo1_vtbl),
+ .volt_table = lp8788_aldo1_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8788_ALDO1_VOUT,
+ .vsel_mask = LP8788_VOUT_1BIT_M,
+ .enable_reg = LP8788_EN_LDO_B,
+ .enable_mask = LP8788_EN_ALDO1_M,
+ },
+ {
+ .name = "aldo2",
+ .id = ALDO2,
+ .ops = &lp8788_ldo_voltage_fixed_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = LP8788_EN_LDO_B,
+ .enable_mask = LP8788_EN_ALDO2_M,
+ },
+ {
+ .name = "aldo3",
+ .id = ALDO3,
+ .ops = &lp8788_ldo_voltage_fixed_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = LP8788_EN_LDO_B,
+ .enable_mask = LP8788_EN_ALDO3_M,
+ },
+ {
+ .name = "aldo4",
+ .id = ALDO4,
+ .ops = &lp8788_ldo_voltage_fixed_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = LP8788_EN_LDO_B,
+ .enable_mask = LP8788_EN_ALDO4_M,
+ },
+ {
+ .name = "aldo5",
+ .id = ALDO5,
+ .ops = &lp8788_ldo_voltage_fixed_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = LP8788_EN_LDO_C,
+ .enable_mask = LP8788_EN_ALDO5_M,
+ },
+ {
+ .name = "aldo6",
+ .id = ALDO6,
+ .ops = &lp8788_ldo_voltage_table_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
+ .volt_table = lp8788_dldo578_aldo6_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8788_ALDO6_VOUT,
+ .vsel_mask = LP8788_VOUT_4BIT_M,
+ .enable_reg = LP8788_EN_LDO_C,
+ .enable_mask = LP8788_EN_ALDO6_M,
+ },
+ {
+ .name = "aldo7",
+ .id = ALDO7,
+ .ops = &lp8788_ldo_voltage_table_ops,
+ .n_voltages = ARRAY_SIZE(lp8788_aldo7_vtbl),
+ .volt_table = lp8788_aldo7_vtbl,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LP8788_ALDO7_VOUT,
+ .vsel_mask = LP8788_VOUT_3BIT_M,
+ .enable_reg = LP8788_EN_LDO_C,
+ .enable_mask = LP8788_EN_ALDO7_M,
+ },
+ {
+ .name = "aldo8",
+ .id = ALDO8,
+ .ops = &lp8788_ldo_voltage_fixed_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = LP8788_EN_LDO_C,
+ .enable_mask = LP8788_EN_ALDO8_M,
+ },
+ {
+ .name = "aldo9",
+ .id = ALDO9,
+ .ops = &lp8788_ldo_voltage_fixed_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = LP8788_EN_LDO_C,
+ .enable_mask = LP8788_EN_ALDO9_M,
+ },
+ {
+ .name = "aldo10",
+ .id = ALDO10,
+ .ops = &lp8788_ldo_voltage_fixed_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = LP8788_EN_LDO_C,
+ .enable_mask = LP8788_EN_ALDO10_M,
+ },
+};
+
+static int lp8788_gpio_request_ldo_en(struct lp8788_ldo *ldo,
+ enum lp8788_ext_ldo_en_id id)
+{
+ struct device *dev = ldo->lp->dev;
+ struct lp8788_ldo_enable_pin *pin = ldo->en_pin;
+ int ret, gpio, pinstate;
+ char *name[] = {
+ [EN_ALDO1] = "LP8788_EN_ALDO1",
+ [EN_ALDO234] = "LP8788_EN_ALDO234",
+ [EN_ALDO5] = "LP8788_EN_ALDO5",
+ [EN_ALDO7] = "LP8788_EN_ALDO7",
+ [EN_DLDO7] = "LP8788_EN_DLDO7",
+ [EN_DLDO911] = "LP8788_EN_DLDO911",
+ };
+
+ gpio = pin->gpio;
+ if (!gpio_is_valid(gpio)) {
+ dev_err(dev, "invalid gpio: %d\n", gpio);
+ return -EINVAL;
+ }
+
+ pinstate = pin->init_state;
+ ret = devm_gpio_request_one(dev, gpio, pinstate, name[id]);
+ if (ret == -EBUSY) {
+ dev_warn(dev, "gpio%d already used\n", gpio);
+ return 0;
+ }
+
+ return ret;
+}
+
+static int lp8788_config_ldo_enable_mode(struct lp8788_ldo *ldo,
+ enum lp8788_ldo_id id)
+{
+ int ret;
+ struct lp8788 *lp = ldo->lp;
+ struct lp8788_platform_data *pdata = lp->pdata;
+ enum lp8788_ext_ldo_en_id enable_id;
+ u8 en_mask[] = {
+ [EN_ALDO1] = LP8788_EN_SEL_ALDO1_M,
+ [EN_ALDO234] = LP8788_EN_SEL_ALDO234_M,
+ [EN_ALDO5] = LP8788_EN_SEL_ALDO5_M,
+ [EN_ALDO7] = LP8788_EN_SEL_ALDO7_M,
+ [EN_DLDO7] = LP8788_EN_SEL_DLDO7_M,
+ [EN_DLDO911] = LP8788_EN_SEL_DLDO911_M,
+ };
+ u8 val[] = {
+ [EN_ALDO1] = 0 << 5,
+ [EN_ALDO234] = 0 << 4,
+ [EN_ALDO5] = 0 << 3,
+ [EN_ALDO7] = 0 << 2,
+ [EN_DLDO7] = 0 << 1,
+ [EN_DLDO911] = 0 << 0,
+ };
+
+ switch (id) {
+ case DLDO7:
+ enable_id = EN_DLDO7;
+ break;
+ case DLDO9:
+ case DLDO11:
+ enable_id = EN_DLDO911;
+ break;
+ case ALDO1:
+ enable_id = EN_ALDO1;
+ break;
+ case ALDO2 ... ALDO4:
+ enable_id = EN_ALDO234;
+ break;
+ case ALDO5:
+ enable_id = EN_ALDO5;
+ break;
+ case ALDO7:
+ enable_id = EN_ALDO7;
+ break;
+ default:
+ return 0;
+ }
+
+ /* if no platform data for ldo pin, then set default enable mode */
+ if (!pdata || !pdata->ldo_pin || !pdata->ldo_pin[enable_id])
+ goto set_default_ldo_enable_mode;
+
+ ldo->en_pin = pdata->ldo_pin[enable_id];
+
+ ret = lp8788_gpio_request_ldo_en(ldo, enable_id);
+ if (ret)
+ goto set_default_ldo_enable_mode;
+
+ return ret;
+
+set_default_ldo_enable_mode:
+ return lp8788_update_bits(lp, LP8788_EN_SEL, en_mask[enable_id],
+ val[enable_id]);
+}
+
+static __devinit int lp8788_dldo_probe(struct platform_device *pdev)
+{
+ struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
+ int id = pdev->id;
+ struct lp8788_ldo *ldo;
+ struct regulator_config cfg = { };
+ struct regulator_dev *rdev;
+ int ret;
+
+ ldo = devm_kzalloc(lp->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
+ if (!ldo)
+ return -ENOMEM;
+
+ ldo->lp = lp;
+ ret = lp8788_config_ldo_enable_mode(ldo, lp8788_dldo_id[id]);
+ if (ret)
+ return ret;
+
+ cfg.dev = lp->dev;
+ cfg.init_data = lp->pdata ? lp->pdata->dldo_data[id] : NULL;
+ cfg.driver_data = ldo;
+ cfg.regmap = lp->regmap;
+
+ rdev = regulator_register(&lp8788_dldo_desc[id], &cfg);
+ if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
+ dev_err(lp->dev, "DLDO%d regulator register err = %d\n",
+ id + 1, ret);
+ return ret;
+ }
+
+ ldo->regulator = rdev;
+ platform_set_drvdata(pdev, ldo);
+
+ return 0;
+}
+
+static int __devexit lp8788_dldo_remove(struct platform_device *pdev)
+{
+ struct lp8788_ldo *ldo = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ regulator_unregister(ldo->regulator);
+
+ return 0;
+}
+
+static struct platform_driver lp8788_dldo_driver = {
+ .probe = lp8788_dldo_probe,
+ .remove = __devexit_p(lp8788_dldo_remove),
+ .driver = {
+ .name = LP8788_DEV_DLDO,
+ .owner = THIS_MODULE,
+ },
+};
+
+static __devinit int lp8788_aldo_probe(struct platform_device *pdev)
+{
+ struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
+ int id = pdev->id;
+ struct lp8788_ldo *ldo;
+ struct regulator_config cfg = { };
+ struct regulator_dev *rdev;
+ int ret;
+
+ ldo = devm_kzalloc(lp->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
+ if (!ldo)
+ return -ENOMEM;
+
+ ldo->lp = lp;
+ ret = lp8788_config_ldo_enable_mode(ldo, lp8788_aldo_id[id]);
+ if (ret)
+ return ret;
+
+ cfg.dev = lp->dev;
+ cfg.init_data = lp->pdata ? lp->pdata->aldo_data[id] : NULL;
+ cfg.driver_data = ldo;
+ cfg.regmap = lp->regmap;
+
+ rdev = regulator_register(&lp8788_aldo_desc[id], &cfg);
+ if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
+ dev_err(lp->dev, "ALDO%d regulator register err = %d\n",
+ id + 1, ret);
+ return ret;
+ }
+
+ ldo->regulator = rdev;
+ platform_set_drvdata(pdev, ldo);
+
+ return 0;
+}
+
+static int __devexit lp8788_aldo_remove(struct platform_device *pdev)
+{
+ struct lp8788_ldo *ldo = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ regulator_unregister(ldo->regulator);
+
+ return 0;
+}
+
+static struct platform_driver lp8788_aldo_driver = {
+ .probe = lp8788_aldo_probe,
+ .remove = __devexit_p(lp8788_aldo_remove),
+ .driver = {
+ .name = LP8788_DEV_ALDO,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init lp8788_ldo_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&lp8788_dldo_driver);
+ if (ret)
+ return ret;
+
+ return platform_driver_register(&lp8788_aldo_driver);
+}
+subsys_initcall(lp8788_ldo_init);
+
+static void __exit lp8788_ldo_exit(void)
+{
+ platform_driver_unregister(&lp8788_aldo_driver);
+ platform_driver_unregister(&lp8788_dldo_driver);
+}
+module_exit(lp8788_ldo_exit);
+
+MODULE_DESCRIPTION("TI LP8788 LDO Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lp8788-dldo");
+MODULE_ALIAS("platform:lp8788-aldo");
diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c
index b9444ee..f67af3c 100644
--- a/drivers/regulator/max1586.c
+++ b/drivers/regulator/max1586.c
@@ -48,6 +48,14 @@
};
/*
+ * V6 voltage
+ * On I2C bus, sending a "x" byte to the max1586 means :
+ * set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
+ * As regulator framework doesn't accept voltages to be 0V, we use 1uV.
+ */
+static int v6_voltages_uv[] = { 1, 1800000, 2500000, 3000000 };
+
+/*
* V3 voltage
* On I2C bus, sending a "x" byte to the max1586 means :
* set V3 to 0.700V + (x & 0x1f) * 0.025V
@@ -55,113 +63,49 @@
* R24 and R25=100kOhm as described in the data sheet.
* The gain is approximately: 1 + R24/R25 + R24/185.5kOhm
*/
-static int max1586_v3_calc_voltage(struct max1586_data *max1586,
- unsigned selector)
-{
- unsigned range_uV = max1586->max_uV - max1586->min_uV;
-
- return max1586->min_uV + (selector * range_uV / MAX1586_V3_MAX_VSEL);
-}
-
-static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV,
- unsigned *selector)
+static int max1586_v3_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned selector)
{
struct max1586_data *max1586 = rdev_get_drvdata(rdev);
struct i2c_client *client = max1586->client;
- unsigned range_uV = max1586->max_uV - max1586->min_uV;
u8 v3_prog;
- if (min_uV > max1586->max_uV || max_uV < max1586->min_uV)
- return -EINVAL;
- if (min_uV < max1586->min_uV)
- min_uV = max1586->min_uV;
-
- *selector = DIV_ROUND_UP((min_uV - max1586->min_uV) *
- MAX1586_V3_MAX_VSEL, range_uV);
- if (max1586_v3_calc_voltage(max1586, *selector) > max_uV)
- return -EINVAL;
-
dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
- max1586_v3_calc_voltage(max1586, *selector) / 1000);
+ regulator_list_voltage_linear(rdev, selector) / 1000);
- v3_prog = I2C_V3_SELECT | (u8) *selector;
+ v3_prog = I2C_V3_SELECT | (u8) selector;
return i2c_smbus_write_byte(client, v3_prog);
}
-static int max1586_v3_list(struct regulator_dev *rdev, unsigned selector)
-{
- struct max1586_data *max1586 = rdev_get_drvdata(rdev);
-
- if (selector > MAX1586_V3_MAX_VSEL)
- return -EINVAL;
- return max1586_v3_calc_voltage(max1586, selector);
-}
-
-/*
- * V6 voltage
- * On I2C bus, sending a "x" byte to the max1586 means :
- * set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
- * As regulator framework doesn't accept voltages to be 0V, we use 1uV.
- */
-static int max1586_v6_calc_voltage(unsigned selector)
-{
- static int voltages_uv[] = { 1, 1800000, 2500000, 3000000 };
-
- return voltages_uv[selector];
-}
-
-static int max1586_v6_set(struct regulator_dev *rdev, int min_uV, int max_uV,
- unsigned int *selector)
+static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned int selector)
{
struct i2c_client *client = rdev_get_drvdata(rdev);
u8 v6_prog;
- if (min_uV < MAX1586_V6_MIN_UV || min_uV > MAX1586_V6_MAX_UV)
- return -EINVAL;
- if (max_uV < MAX1586_V6_MIN_UV || max_uV > MAX1586_V6_MAX_UV)
- return -EINVAL;
-
- if (min_uV < 1800000)
- *selector = 0;
- else if (min_uV < 2500000)
- *selector = 1;
- else if (min_uV < 3000000)
- *selector = 2;
- else if (min_uV >= 3000000)
- *selector = 3;
-
- if (max1586_v6_calc_voltage(*selector) > max_uV)
- return -EINVAL;
-
dev_dbg(&client->dev, "changing voltage v6 to %dmv\n",
- max1586_v6_calc_voltage(*selector) / 1000);
+ rdev->desc->volt_table[selector] / 1000);
- v6_prog = I2C_V6_SELECT | (u8) *selector;
+ v6_prog = I2C_V6_SELECT | (u8) selector;
return i2c_smbus_write_byte(client, v6_prog);
}
-static int max1586_v6_list(struct regulator_dev *rdev, unsigned selector)
-{
- if (selector > MAX1586_V6_MAX_VSEL)
- return -EINVAL;
- return max1586_v6_calc_voltage(selector);
-}
-
/*
* The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back
* the set up value.
*/
static struct regulator_ops max1586_v3_ops = {
- .set_voltage = max1586_v3_set,
- .list_voltage = max1586_v3_list,
+ .set_voltage_sel = max1586_v3_set_voltage_sel,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
};
static struct regulator_ops max1586_v6_ops = {
- .set_voltage = max1586_v6_set,
- .list_voltage = max1586_v6_list,
+ .set_voltage_sel = max1586_v6_set_voltage_sel,
+ .list_voltage = regulator_list_voltage_table,
};
-static const struct regulator_desc max1586_reg[] = {
+static struct regulator_desc max1586_reg[] = {
{
.name = "Output_V3",
.id = MAX1586_V3,
@@ -176,6 +120,7 @@
.ops = &max1586_v6_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = MAX1586_V6_MAX_VSEL + 1,
+ .volt_table = v6_voltages_uv,
.owner = THIS_MODULE,
},
};
@@ -213,6 +158,13 @@
goto err;
}
+ if (id == MAX1586_V3) {
+ max1586_reg[id].min_uV = max1586->min_uV;
+ max1586_reg[id].uV_step =
+ (max1586->max_uV - max1586->min_uV) /
+ MAX1586_V3_MAX_VSEL;
+ }
+
config.dev = &client->dev;
config.init_data = pdata->subdevs[i].platform_data;
config.driver_data = max1586;
diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
new file mode 100644
index 0000000..c564af6
--- /dev/null
+++ b/drivers/regulator/max77686.c
@@ -0,0 +1,389 @@
+/*
+ * max77686.c - Regulator driver for the Maxim 77686
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Chiwoong Byun <woong.byun@smasung.com>
+ * Jonghwa Lee <jonghwa3.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * This driver is based on max8997.c
+ */
+
+#include <linux/kernel.h>
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/max77686.h>
+#include <linux/mfd/max77686-private.h>
+
+#define MAX77686_LDO_MINUV 800000
+#define MAX77686_LDO_UVSTEP 50000
+#define MAX77686_LDO_LOW_MINUV 800000
+#define MAX77686_LDO_LOW_UVSTEP 25000
+#define MAX77686_BUCK_MINUV 750000
+#define MAX77686_BUCK_UVSTEP 50000
+#define MAX77686_RAMP_DELAY 100000 /* uV/us */
+#define MAX77686_DVS_RAMP_DELAY 27500 /* uV/us */
+#define MAX77686_DVS_MINUV 600000
+#define MAX77686_DVS_UVSTEP 12500
+
+#define MAX77686_OPMODE_SHIFT 6
+#define MAX77686_OPMODE_BUCK234_SHIFT 4
+#define MAX77686_OPMODE_MASK 0x3
+
+#define MAX77686_VSEL_MASK 0x3F
+#define MAX77686_DVS_VSEL_MASK 0xFF
+
+#define MAX77686_RAMP_RATE_MASK 0xC0
+
+#define MAX77686_REGULATORS MAX77686_REG_MAX
+#define MAX77686_LDOS 26
+
+enum max77686_ramp_rate {
+ RAMP_RATE_13P75MV,
+ RAMP_RATE_27P5MV,
+ RAMP_RATE_55MV,
+ RAMP_RATE_NO_CTRL, /* 100mV/us */
+};
+
+struct max77686_data {
+ struct regulator_dev **rdev;
+};
+
+static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
+{
+ unsigned int ramp_value = RAMP_RATE_NO_CTRL;
+
+ switch (ramp_delay) {
+ case 1 ... 13750:
+ ramp_value = RAMP_RATE_13P75MV;
+ break;
+ case 13751 ... 27500:
+ ramp_value = RAMP_RATE_27P5MV;
+ break;
+ case 27501 ... 55000:
+ ramp_value = RAMP_RATE_55MV;
+ break;
+ case 55001 ... 100000:
+ break;
+ default:
+ pr_warn("%s: ramp_delay: %d not supported, setting 100000\n",
+ rdev->desc->name, ramp_delay);
+ }
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ MAX77686_RAMP_RATE_MASK, ramp_value << 6);
+}
+
+static struct regulator_ops max77686_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static struct regulator_ops max77686_buck_dvs_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = max77686_set_ramp_delay,
+};
+
+#define regulator_desc_ldo(num) { \
+ .name = "LDO"#num, \
+ .id = MAX77686_LDO##num, \
+ .ops = &max77686_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = MAX77686_LDO_MINUV, \
+ .uV_step = MAX77686_LDO_UVSTEP, \
+ .ramp_delay = MAX77686_RAMP_DELAY, \
+ .n_voltages = MAX77686_VSEL_MASK + 1, \
+ .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
+ .vsel_mask = MAX77686_VSEL_MASK, \
+ .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
+ .enable_mask = MAX77686_OPMODE_MASK \
+ << MAX77686_OPMODE_SHIFT, \
+}
+#define regulator_desc_ldo_low(num) { \
+ .name = "LDO"#num, \
+ .id = MAX77686_LDO##num, \
+ .ops = &max77686_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = MAX77686_LDO_LOW_MINUV, \
+ .uV_step = MAX77686_LDO_LOW_UVSTEP, \
+ .ramp_delay = MAX77686_RAMP_DELAY, \
+ .n_voltages = MAX77686_VSEL_MASK + 1, \
+ .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
+ .vsel_mask = MAX77686_VSEL_MASK, \
+ .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
+ .enable_mask = MAX77686_OPMODE_MASK \
+ << MAX77686_OPMODE_SHIFT, \
+}
+#define regulator_desc_buck(num) { \
+ .name = "BUCK"#num, \
+ .id = MAX77686_BUCK##num, \
+ .ops = &max77686_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = MAX77686_BUCK_MINUV, \
+ .uV_step = MAX77686_BUCK_UVSTEP, \
+ .ramp_delay = MAX77686_RAMP_DELAY, \
+ .n_voltages = MAX77686_VSEL_MASK + 1, \
+ .vsel_reg = MAX77686_REG_BUCK5OUT + (num - 5) * 2, \
+ .vsel_mask = MAX77686_VSEL_MASK, \
+ .enable_reg = MAX77686_REG_BUCK5CTRL + (num - 5) * 2, \
+ .enable_mask = MAX77686_OPMODE_MASK, \
+}
+#define regulator_desc_buck1(num) { \
+ .name = "BUCK"#num, \
+ .id = MAX77686_BUCK##num, \
+ .ops = &max77686_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = MAX77686_BUCK_MINUV, \
+ .uV_step = MAX77686_BUCK_UVSTEP, \
+ .ramp_delay = MAX77686_RAMP_DELAY, \
+ .n_voltages = MAX77686_VSEL_MASK + 1, \
+ .vsel_reg = MAX77686_REG_BUCK1OUT, \
+ .vsel_mask = MAX77686_VSEL_MASK, \
+ .enable_reg = MAX77686_REG_BUCK1CTRL, \
+ .enable_mask = MAX77686_OPMODE_MASK, \
+}
+#define regulator_desc_buck_dvs(num) { \
+ .name = "BUCK"#num, \
+ .id = MAX77686_BUCK##num, \
+ .ops = &max77686_buck_dvs_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = MAX77686_DVS_MINUV, \
+ .uV_step = MAX77686_DVS_UVSTEP, \
+ .ramp_delay = MAX77686_DVS_RAMP_DELAY, \
+ .n_voltages = MAX77686_DVS_VSEL_MASK + 1, \
+ .vsel_reg = MAX77686_REG_BUCK2DVS1 + (num - 2) * 10, \
+ .vsel_mask = MAX77686_DVS_VSEL_MASK, \
+ .enable_reg = MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10, \
+ .enable_mask = MAX77686_OPMODE_MASK \
+ << MAX77686_OPMODE_BUCK234_SHIFT, \
+}
+
+static struct regulator_desc regulators[] = {
+ regulator_desc_ldo_low(1),
+ regulator_desc_ldo_low(2),
+ regulator_desc_ldo(3),
+ regulator_desc_ldo(4),
+ regulator_desc_ldo(5),
+ regulator_desc_ldo_low(6),
+ regulator_desc_ldo_low(7),
+ regulator_desc_ldo_low(8),
+ regulator_desc_ldo(9),
+ regulator_desc_ldo(10),
+ regulator_desc_ldo(11),
+ regulator_desc_ldo(12),
+ regulator_desc_ldo(13),
+ regulator_desc_ldo(14),
+ regulator_desc_ldo_low(15),
+ regulator_desc_ldo(16),
+ regulator_desc_ldo(17),
+ regulator_desc_ldo(18),
+ regulator_desc_ldo(19),
+ regulator_desc_ldo(20),
+ regulator_desc_ldo(21),
+ regulator_desc_ldo(22),
+ regulator_desc_ldo(23),
+ regulator_desc_ldo(24),
+ regulator_desc_ldo(25),
+ regulator_desc_ldo(26),
+ regulator_desc_buck1(1),
+ regulator_desc_buck_dvs(2),
+ regulator_desc_buck_dvs(3),
+ regulator_desc_buck_dvs(4),
+ regulator_desc_buck(5),
+ regulator_desc_buck(6),
+ regulator_desc_buck(7),
+ regulator_desc_buck(8),
+ regulator_desc_buck(9),
+};
+
+#ifdef CONFIG_OF
+static int max77686_pmic_dt_parse_pdata(struct max77686_dev *iodev,
+ struct max77686_platform_data *pdata)
+{
+ struct device_node *pmic_np, *regulators_np;
+ struct max77686_regulator_data *rdata;
+ struct of_regulator_match rmatch;
+ unsigned int i;
+
+ pmic_np = iodev->dev->of_node;
+ regulators_np = of_find_node_by_name(pmic_np, "voltage-regulators");
+ if (!regulators_np) {
+ dev_err(iodev->dev, "could not find regulators sub-node\n");
+ return -EINVAL;
+ }
+
+ pdata->num_regulators = ARRAY_SIZE(regulators);
+ rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) *
+ pdata->num_regulators, GFP_KERNEL);
+ if (!rdata) {
+ dev_err(iodev->dev,
+ "could not allocate memory for regulator data\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < pdata->num_regulators; i++) {
+ rmatch.name = regulators[i].name;
+ rmatch.init_data = NULL;
+ rmatch.of_node = NULL;
+ of_regulator_match(iodev->dev, regulators_np, &rmatch, 1);
+ rdata[i].initdata = rmatch.init_data;
+ }
+
+ pdata->regulators = rdata;
+
+ return 0;
+}
+#else
+static int max77686_pmic_dt_parse_pdata(struct max77686_dev *iodev,
+ struct max77686_platform_data *pdata)
+{
+ return 0;
+}
+#endif /* CONFIG_OF */
+
+static __devinit int max77686_pmic_probe(struct platform_device *pdev)
+{
+ struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev);
+ struct regulator_dev **rdev;
+ struct max77686_data *max77686;
+ int i, size;
+ int ret = 0;
+ struct regulator_config config = { };
+
+ dev_dbg(&pdev->dev, "%s\n", __func__);
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data found for regulator\n");
+ return -ENODEV;
+ }
+
+ if (iodev->dev->of_node) {
+ ret = max77686_pmic_dt_parse_pdata(iodev, pdata);
+ if (ret)
+ return ret;
+ }
+
+ if (pdata->num_regulators != MAX77686_REGULATORS) {
+ dev_err(&pdev->dev,
+ "Invalid initial data for regulator's initialiation\n");
+ return -EINVAL;
+ }
+
+ max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data),
+ GFP_KERNEL);
+ if (!max77686)
+ return -ENOMEM;
+
+ size = sizeof(struct regulator_dev *) * MAX77686_REGULATORS;
+ max77686->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+ if (!max77686->rdev)
+ return -ENOMEM;
+
+ rdev = max77686->rdev;
+ config.dev = &pdev->dev;
+ config.regmap = iodev->regmap;
+ platform_set_drvdata(pdev, max77686);
+
+ for (i = 0; i < MAX77686_REGULATORS; i++) {
+ config.init_data = pdata->regulators[i].initdata;
+
+ rdev[i] = regulator_register(®ulators[i], &config);
+ if (IS_ERR(rdev[i])) {
+ ret = PTR_ERR(rdev[i]);
+ dev_err(&pdev->dev,
+ "regulator init failed for %d\n", i);
+ rdev[i] = NULL;
+ goto err;
+ }
+ }
+
+ return 0;
+err:
+ while (--i >= 0)
+ regulator_unregister(rdev[i]);
+ return ret;
+}
+
+static int __devexit max77686_pmic_remove(struct platform_device *pdev)
+{
+ struct max77686_data *max77686 = platform_get_drvdata(pdev);
+ struct regulator_dev **rdev = max77686->rdev;
+ int i;
+
+ for (i = 0; i < MAX77686_REGULATORS; i++)
+ if (rdev[i])
+ regulator_unregister(rdev[i]);
+
+ return 0;
+}
+
+static const struct platform_device_id max77686_pmic_id[] = {
+ {"max77686-pmic", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(platform, max77686_pmic_id);
+
+static struct platform_driver max77686_pmic_driver = {
+ .driver = {
+ .name = "max77686-pmic",
+ .owner = THIS_MODULE,
+ },
+ .probe = max77686_pmic_probe,
+ .remove = __devexit_p(max77686_pmic_remove),
+ .id_table = max77686_pmic_id,
+};
+
+static int __init max77686_pmic_init(void)
+{
+ return platform_driver_register(&max77686_pmic_driver);
+}
+subsys_initcall(max77686_pmic_init);
+
+static void __exit max77686_pmic_cleanup(void)
+{
+ platform_driver_unregister(&max77686_pmic_driver);
+}
+module_exit(max77686_pmic_cleanup);
+
+MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver");
+MODULE_AUTHOR("Chiwoong Byun <woong.byun@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c
index 1f4bb80..9d540cd 100644
--- a/drivers/regulator/max8649.c
+++ b/drivers/regulator/max8649.c
@@ -259,6 +259,7 @@
config.dev = &client->dev;
config.init_data = pdata->regulator;
config.driver_data = info;
+ config.regmap = info->regmap;
info->regulator = regulator_register(&dcdc_desc, &config);
if (IS_ERR(info->regulator)) {
diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c
index 910c9b2..355ca7b 100644
--- a/drivers/regulator/max8952.c
+++ b/drivers/regulator/max8952.c
@@ -51,7 +51,6 @@
bool vid0;
bool vid1;
- bool en;
};
static int max8952_read_reg(struct max8952_data *max8952, u8 reg)
@@ -80,38 +79,6 @@
return (max8952->pdata->dvs_mode[selector] * 10 + 770) * 1000;
}
-static int max8952_is_enabled(struct regulator_dev *rdev)
-{
- struct max8952_data *max8952 = rdev_get_drvdata(rdev);
- return max8952->en;
-}
-
-static int max8952_enable(struct regulator_dev *rdev)
-{
- struct max8952_data *max8952 = rdev_get_drvdata(rdev);
-
- /* If not valid, assume "ALWAYS_HIGH" */
- if (gpio_is_valid(max8952->pdata->gpio_en))
- gpio_set_value(max8952->pdata->gpio_en, 1);
-
- max8952->en = true;
- return 0;
-}
-
-static int max8952_disable(struct regulator_dev *rdev)
-{
- struct max8952_data *max8952 = rdev_get_drvdata(rdev);
-
- /* If not valid, assume "ALWAYS_HIGH" -> not permitted */
- if (gpio_is_valid(max8952->pdata->gpio_en))
- gpio_set_value(max8952->pdata->gpio_en, 0);
- else
- return -EPERM;
-
- max8952->en = false;
- return 0;
-}
-
static int max8952_get_voltage_sel(struct regulator_dev *rdev)
{
struct max8952_data *max8952 = rdev_get_drvdata(rdev);
@@ -146,12 +113,8 @@
static struct regulator_ops max8952_ops = {
.list_voltage = max8952_list_voltage,
- .is_enabled = max8952_is_enabled,
- .enable = max8952_enable,
- .disable = max8952_disable,
.get_voltage_sel = max8952_get_voltage_sel,
.set_voltage_sel = max8952_set_voltage_sel,
- .set_suspend_disable = max8952_disable,
};
static const struct regulator_desc regulator = {
@@ -194,6 +157,10 @@
config.init_data = &pdata->reg_data;
config.driver_data = max8952;
+ config.ena_gpio = pdata->gpio_en;
+ if (pdata->reg_data.constraints.boot_on)
+ config.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
+
max8952->rdev = regulator_register(®ulator, &config);
if (IS_ERR(max8952->rdev)) {
@@ -202,27 +169,9 @@
return ret;
}
- max8952->en = !!(pdata->reg_data.constraints.boot_on);
max8952->vid0 = pdata->default_mode & 0x1;
max8952->vid1 = (pdata->default_mode >> 1) & 0x1;
- if (gpio_is_valid(pdata->gpio_en)) {
- if (!gpio_request(pdata->gpio_en, "MAX8952 EN"))
- gpio_direction_output(pdata->gpio_en, max8952->en);
- else
- err = 1;
- } else
- err = 2;
-
- if (err) {
- dev_info(max8952->dev, "EN gpio invalid: assume that EN"
- "is always High\n");
- max8952->en = 1;
- pdata->gpio_en = -1; /* Mark invalid */
- }
-
- err = 0;
-
if (gpio_is_valid(pdata->gpio_vid0) &&
gpio_is_valid(pdata->gpio_vid1)) {
if (!gpio_request(pdata->gpio_vid0, "MAX8952 VID0"))
@@ -308,7 +257,6 @@
gpio_free(pdata->gpio_vid0);
gpio_free(pdata->gpio_vid1);
- gpio_free(pdata->gpio_en);
return 0;
}
diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c
index 704cd49..e39a0c7 100644
--- a/drivers/regulator/max8997.c
+++ b/drivers/regulator/max8997.c
@@ -1025,7 +1025,6 @@
*/
if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
pdata->buck5_gpiodvs) {
- bool gpio1set = false, gpio2set = false;
if (!gpio_is_valid(pdata->buck125_gpios[0]) ||
!gpio_is_valid(pdata->buck125_gpios[1]) ||
@@ -1035,40 +1034,20 @@
goto err_out;
}
- ret = gpio_request(pdata->buck125_gpios[0],
- "MAX8997 SET1");
- if (ret == -EBUSY)
- dev_warn(&pdev->dev, "Duplicated gpio request"
- " on SET1\n");
- else if (ret)
+ ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[0],
+ "MAX8997 SET1");
+ if (ret)
goto err_out;
- else
- gpio1set = true;
- ret = gpio_request(pdata->buck125_gpios[1],
- "MAX8997 SET2");
- if (ret == -EBUSY)
- dev_warn(&pdev->dev, "Duplicated gpio request"
- " on SET2\n");
- else if (ret) {
- if (gpio1set)
- gpio_free(pdata->buck125_gpios[0]);
+ ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[1],
+ "MAX8997 SET2");
+ if (ret)
goto err_out;
- } else
- gpio2set = true;
- ret = gpio_request(pdata->buck125_gpios[2],
+ ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[2],
"MAX8997 SET3");
- if (ret == -EBUSY)
- dev_warn(&pdev->dev, "Duplicated gpio request"
- " on SET3\n");
- else if (ret) {
- if (gpio1set)
- gpio_free(pdata->buck125_gpios[0]);
- if (gpio2set)
- gpio_free(pdata->buck125_gpios[1]);
+ if (ret)
goto err_out;
- }
gpio_direction_output(pdata->buck125_gpios[0],
(max8997->buck125_gpioindex >> 2)
@@ -1079,7 +1058,6 @@
gpio_direction_output(pdata->buck125_gpios[2],
(max8997->buck125_gpioindex >> 0)
& 0x1); /* SET3 */
- ret = 0;
}
/* DVS-GPIO disabled */
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index 18bb58b..5dfa920 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -111,27 +111,6 @@
&buck4_voltage_map_desc, /* BUCK4 */
};
-static int max8998_list_voltage(struct regulator_dev *rdev,
- unsigned int selector)
-{
- const struct voltage_map_desc *desc;
- int ldo = rdev_get_id(rdev);
- int val;
-
- if (ldo >= ARRAY_SIZE(ldo_voltage_map))
- return -EINVAL;
-
- desc = ldo_voltage_map[ldo];
- if (desc == NULL)
- return -EINVAL;
-
- val = desc->min + desc->step * selector;
- if (val > desc->max)
- return -EINVAL;
-
- return val * 1000;
-}
-
static int max8998_get_enable_register(struct regulator_dev *rdev,
int *reg, int *shift)
{
@@ -297,41 +276,18 @@
return val;
}
-static int max8998_set_voltage_ldo(struct regulator_dev *rdev,
- int min_uV, int max_uV, unsigned *selector)
+static int max8998_set_voltage_ldo_sel(struct regulator_dev *rdev,
+ unsigned selector)
{
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8998->iodev->i2c;
- int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
- const struct voltage_map_desc *desc;
- int ldo = rdev_get_id(rdev);
- int reg, shift = 0, mask, ret, i;
-
- if (ldo >= ARRAY_SIZE(ldo_voltage_map))
- return -EINVAL;
-
- desc = ldo_voltage_map[ldo];
- if (desc == NULL)
- return -EINVAL;
-
- if (max_vol < desc->min || min_vol > desc->max)
- return -EINVAL;
-
- if (min_vol < desc->min)
- min_vol = desc->min;
-
- i = DIV_ROUND_UP(min_vol - desc->min, desc->step);
-
- if (desc->min + desc->step*i > max_vol)
- return -EINVAL;
-
- *selector = i;
+ int reg, shift = 0, mask, ret;
ret = max8998_get_voltage_register(rdev, ®, &shift, &mask);
if (ret)
return ret;
- ret = max8998_update_reg(i2c, reg, i<<shift, mask<<shift);
+ ret = max8998_update_reg(i2c, reg, selector<<shift, mask<<shift);
return ret;
}
@@ -347,41 +303,18 @@
gpio_set_value(gpio, v & 0x1);
}
-static int max8998_set_voltage_buck(struct regulator_dev *rdev,
- int min_uV, int max_uV, unsigned *selector)
+static int max8998_set_voltage_buck_sel(struct regulator_dev *rdev,
+ unsigned selector)
{
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
struct max8998_platform_data *pdata =
dev_get_platdata(max8998->iodev->dev);
struct i2c_client *i2c = max8998->iodev->i2c;
- int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
- const struct voltage_map_desc *desc;
int buck = rdev_get_id(rdev);
int reg, shift = 0, mask, ret;
- int i, j, previous_sel;
+ int j, previous_sel;
static u8 buck1_last_val;
- if (buck >= ARRAY_SIZE(ldo_voltage_map))
- return -EINVAL;
-
- desc = ldo_voltage_map[buck];
-
- if (desc == NULL)
- return -EINVAL;
-
- if (max_vol < desc->min || min_vol > desc->max)
- return -EINVAL;
-
- if (min_vol < desc->min)
- min_vol = desc->min;
-
- i = DIV_ROUND_UP(min_vol - desc->min, desc->step);
-
- if (desc->min + desc->step*i > max_vol)
- return -EINVAL;
-
- *selector = i;
-
ret = max8998_get_voltage_register(rdev, ®, &shift, &mask);
if (ret)
return ret;
@@ -390,19 +323,19 @@
/* Check if voltage needs to be changed */
/* if previous_voltage equal new voltage, return */
- if (previous_sel == i) {
+ if (previous_sel == selector) {
dev_dbg(max8998->dev, "No voltage change, old:%d, new:%d\n",
- max8998_list_voltage(rdev, previous_sel),
- max8998_list_voltage(rdev, i));
+ regulator_list_voltage_linear(rdev, previous_sel),
+ regulator_list_voltage_linear(rdev, selector));
return ret;
}
switch (buck) {
case MAX8998_BUCK1:
dev_dbg(max8998->dev,
- "BUCK1, i:%d, buck1_vol1:%d, buck1_vol2:%d\n"
+ "BUCK1, selector:%d, buck1_vol1:%d, buck1_vol2:%d\n"
"buck1_vol3:%d, buck1_vol4:%d\n",
- i, max8998->buck1_vol[0], max8998->buck1_vol[1],
+ selector, max8998->buck1_vol[0], max8998->buck1_vol[1],
max8998->buck1_vol[2], max8998->buck1_vol[3]);
if (gpio_is_valid(pdata->buck1_set1) &&
@@ -411,7 +344,7 @@
/* check if requested voltage */
/* value is already defined */
for (j = 0; j < ARRAY_SIZE(max8998->buck1_vol); j++) {
- if (max8998->buck1_vol[j] == i) {
+ if (max8998->buck1_vol[j] == selector) {
max8998->buck1_idx = j;
buck1_gpio_set(pdata->buck1_set1,
pdata->buck1_set2, j);
@@ -426,11 +359,11 @@
max8998->buck1_idx = (buck1_last_val % 2) + 2;
dev_dbg(max8998->dev, "max8998->buck1_idx:%d\n",
max8998->buck1_idx);
- max8998->buck1_vol[max8998->buck1_idx] = i;
+ max8998->buck1_vol[max8998->buck1_idx] = selector;
ret = max8998_get_voltage_register(rdev, ®,
&shift,
&mask);
- ret = max8998_write_reg(i2c, reg, i);
+ ret = max8998_write_reg(i2c, reg, selector);
buck1_gpio_set(pdata->buck1_set1,
pdata->buck1_set2, max8998->buck1_idx);
buck1_last_val++;
@@ -440,20 +373,20 @@
gpio_get_value(pdata->buck1_set2));
break;
} else {
- ret = max8998_write_reg(i2c, reg, i);
+ ret = max8998_write_reg(i2c, reg, selector);
}
break;
case MAX8998_BUCK2:
dev_dbg(max8998->dev,
- "BUCK2, i:%d buck2_vol1:%d, buck2_vol2:%d\n"
- , i, max8998->buck2_vol[0], max8998->buck2_vol[1]);
+ "BUCK2, selector:%d buck2_vol1:%d, buck2_vol2:%d\n",
+ selector, max8998->buck2_vol[0], max8998->buck2_vol[1]);
if (gpio_is_valid(pdata->buck2_set3)) {
/* check if requested voltage */
/* value is already defined */
for (j = 0; j < ARRAY_SIZE(max8998->buck2_vol); j++) {
- if (max8998->buck2_vol[j] == i) {
+ if (max8998->buck2_vol[j] == selector) {
max8998->buck2_idx = j;
buck2_gpio_set(pdata->buck2_set3, j);
goto buck2_exit;
@@ -465,20 +398,21 @@
max8998_get_voltage_register(rdev,
®, &shift, &mask);
- ret = max8998_write_reg(i2c, reg, i);
- max8998->buck2_vol[max8998->buck2_idx] = i;
+ ret = max8998_write_reg(i2c, reg, selector);
+ max8998->buck2_vol[max8998->buck2_idx] = selector;
buck2_gpio_set(pdata->buck2_set3, max8998->buck2_idx);
buck2_exit:
dev_dbg(max8998->dev, "%s: SET3:%d\n", i2c->name,
gpio_get_value(pdata->buck2_set3));
} else {
- ret = max8998_write_reg(i2c, reg, i);
+ ret = max8998_write_reg(i2c, reg, selector);
}
break;
case MAX8998_BUCK3:
case MAX8998_BUCK4:
- ret = max8998_update_reg(i2c, reg, i<<shift, mask<<shift);
+ ret = max8998_update_reg(i2c, reg, selector<<shift,
+ mask<<shift);
break;
}
@@ -519,34 +453,30 @@
}
static struct regulator_ops max8998_ldo_ops = {
- .list_voltage = max8998_list_voltage,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
.is_enabled = max8998_ldo_is_enabled,
.enable = max8998_ldo_enable,
.disable = max8998_ldo_disable,
.get_voltage_sel = max8998_get_voltage_sel,
- .set_voltage = max8998_set_voltage_ldo,
- .set_suspend_enable = max8998_ldo_enable,
- .set_suspend_disable = max8998_ldo_disable,
+ .set_voltage_sel = max8998_set_voltage_ldo_sel,
};
static struct regulator_ops max8998_buck_ops = {
- .list_voltage = max8998_list_voltage,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
.is_enabled = max8998_ldo_is_enabled,
.enable = max8998_ldo_enable,
.disable = max8998_ldo_disable,
.get_voltage_sel = max8998_get_voltage_sel,
- .set_voltage = max8998_set_voltage_buck,
+ .set_voltage_sel = max8998_set_voltage_buck_sel,
.set_voltage_time_sel = max8998_set_voltage_buck_time_sel,
- .set_suspend_enable = max8998_ldo_enable,
- .set_suspend_disable = max8998_ldo_disable,
};
static struct regulator_ops max8998_others_ops = {
.is_enabled = max8998_ldo_is_enabled,
.enable = max8998_ldo_enable,
.disable = max8998_ldo_disable,
- .set_suspend_enable = max8998_ldo_enable,
- .set_suspend_disable = max8998_ldo_disable,
};
static struct regulator_desc regulators[] = {
@@ -860,7 +790,10 @@
desc = ldo_voltage_map[id];
if (desc && regulators[index].ops != &max8998_others_ops) {
int count = (desc->max - desc->min) / desc->step + 1;
+
regulators[index].n_voltages = count;
+ regulators[index].min_uV = desc->min * 1000;
+ regulators[index].uV_step = desc->step * 1000;
}
config.dev = max8998->dev;
diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c
index 7dcdfa2..4932e34 100644
--- a/drivers/regulator/mc13783-regulator.c
+++ b/drivers/regulator/mc13783-regulator.c
@@ -93,78 +93,78 @@
/* Voltage Values */
-static const int mc13783_sw3_val[] = {
+static const unsigned int mc13783_sw3_val[] = {
5000000, 5000000, 5000000, 5500000,
};
-static const int mc13783_vaudio_val[] = {
+static const unsigned int mc13783_vaudio_val[] = {
2775000,
};
-static const int mc13783_viohi_val[] = {
+static const unsigned int mc13783_viohi_val[] = {
2775000,
};
-static const int mc13783_violo_val[] = {
+static const unsigned int mc13783_violo_val[] = {
1200000, 1300000, 1500000, 1800000,
};
-static const int mc13783_vdig_val[] = {
+static const unsigned int mc13783_vdig_val[] = {
1200000, 1300000, 1500000, 1800000,
};
-static const int mc13783_vgen_val[] = {
+static const unsigned int mc13783_vgen_val[] = {
1200000, 1300000, 1500000, 1800000,
1100000, 2000000, 2775000, 2400000,
};
-static const int mc13783_vrfdig_val[] = {
+static const unsigned int mc13783_vrfdig_val[] = {
1200000, 1500000, 1800000, 1875000,
};
-static const int mc13783_vrfref_val[] = {
+static const unsigned int mc13783_vrfref_val[] = {
2475000, 2600000, 2700000, 2775000,
};
-static const int mc13783_vrfcp_val[] = {
+static const unsigned int mc13783_vrfcp_val[] = {
2700000, 2775000,
};
-static const int mc13783_vsim_val[] = {
+static const unsigned int mc13783_vsim_val[] = {
1800000, 2900000, 3000000,
};
-static const int mc13783_vesim_val[] = {
+static const unsigned int mc13783_vesim_val[] = {
1800000, 2900000,
};
-static const int mc13783_vcam_val[] = {
+static const unsigned int mc13783_vcam_val[] = {
1500000, 1800000, 2500000, 2550000,
2600000, 2750000, 2800000, 3000000,
};
-static const int mc13783_vrfbg_val[] = {
+static const unsigned int mc13783_vrfbg_val[] = {
1250000,
};
-static const int mc13783_vvib_val[] = {
+static const unsigned int mc13783_vvib_val[] = {
1300000, 1800000, 2000000, 3000000,
};
-static const int mc13783_vmmc_val[] = {
+static const unsigned int mc13783_vmmc_val[] = {
1600000, 1800000, 2000000, 2600000,
2700000, 2800000, 2900000, 3000000,
};
-static const int mc13783_vrf_val[] = {
+static const unsigned int mc13783_vrf_val[] = {
1500000, 1875000, 2700000, 2775000,
};
-static const int mc13783_gpo_val[] = {
+static const unsigned int mc13783_gpo_val[] = {
3100000,
};
-static const int mc13783_pwgtdrv_val[] = {
+static const unsigned int mc13783_pwgtdrv_val[] = {
5500000,
};
@@ -328,7 +328,7 @@
.enable = mc13783_gpo_regulator_enable,
.disable = mc13783_gpo_regulator_disable,
.is_enabled = mc13783_gpo_regulator_is_enabled,
- .list_voltage = mc13xxx_regulator_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.set_voltage = mc13xxx_fixed_regulator_set_voltage,
.get_voltage = mc13xxx_fixed_regulator_get_voltage,
};
diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c
index 970a233..b388b74 100644
--- a/drivers/regulator/mc13892-regulator.c
+++ b/drivers/regulator/mc13892-regulator.c
@@ -150,12 +150,12 @@
#define MC13892_USB1 50
#define MC13892_USB1_VUSBEN (1<<3)
-static const int mc13892_vcoincell[] = {
+static const unsigned int mc13892_vcoincell[] = {
2500000, 2700000, 2800000, 2900000, 3000000, 3100000,
3200000, 3300000,
};
-static const int mc13892_sw1[] = {
+static const unsigned int mc13892_sw1[] = {
600000, 625000, 650000, 675000, 700000, 725000,
750000, 775000, 800000, 825000, 850000, 875000,
900000, 925000, 950000, 975000, 1000000, 1025000,
@@ -164,7 +164,7 @@
1350000, 1375000
};
-static const int mc13892_sw[] = {
+static const unsigned int mc13892_sw[] = {
600000, 625000, 650000, 675000, 700000, 725000,
750000, 775000, 800000, 825000, 850000, 875000,
900000, 925000, 950000, 975000, 1000000, 1025000,
@@ -176,65 +176,65 @@
1800000, 1825000, 1850000, 1875000
};
-static const int mc13892_swbst[] = {
+static const unsigned int mc13892_swbst[] = {
5000000,
};
-static const int mc13892_viohi[] = {
+static const unsigned int mc13892_viohi[] = {
2775000,
};
-static const int mc13892_vpll[] = {
+static const unsigned int mc13892_vpll[] = {
1050000, 1250000, 1650000, 1800000,
};
-static const int mc13892_vdig[] = {
+static const unsigned int mc13892_vdig[] = {
1050000, 1250000, 1650000, 1800000,
};
-static const int mc13892_vsd[] = {
+static const unsigned int mc13892_vsd[] = {
1800000, 2000000, 2600000, 2700000,
2800000, 2900000, 3000000, 3150000,
};
-static const int mc13892_vusb2[] = {
+static const unsigned int mc13892_vusb2[] = {
2400000, 2600000, 2700000, 2775000,
};
-static const int mc13892_vvideo[] = {
+static const unsigned int mc13892_vvideo[] = {
2700000, 2775000, 2500000, 2600000,
};
-static const int mc13892_vaudio[] = {
+static const unsigned int mc13892_vaudio[] = {
2300000, 2500000, 2775000, 3000000,
};
-static const int mc13892_vcam[] = {
+static const unsigned int mc13892_vcam[] = {
2500000, 2600000, 2750000, 3000000,
};
-static const int mc13892_vgen1[] = {
+static const unsigned int mc13892_vgen1[] = {
1200000, 1500000, 2775000, 3150000,
};
-static const int mc13892_vgen2[] = {
+static const unsigned int mc13892_vgen2[] = {
1200000, 1500000, 1600000, 1800000,
2700000, 2800000, 3000000, 3150000,
};
-static const int mc13892_vgen3[] = {
+static const unsigned int mc13892_vgen3[] = {
1800000, 2900000,
};
-static const int mc13892_vusb[] = {
+static const unsigned int mc13892_vusb[] = {
3300000,
};
-static const int mc13892_gpo[] = {
+static const unsigned int mc13892_gpo[] = {
2750000,
};
-static const int mc13892_pwgtdrv[] = {
+static const unsigned int mc13892_pwgtdrv[] = {
5000000,
};
@@ -394,7 +394,7 @@
.enable = mc13892_gpo_regulator_enable,
.disable = mc13892_gpo_regulator_disable,
.is_enabled = mc13892_gpo_regulator_is_enabled,
- .list_voltage = mc13xxx_regulator_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.set_voltage = mc13xxx_fixed_regulator_set_voltage,
.get_voltage = mc13xxx_fixed_regulator_get_voltage,
};
@@ -436,7 +436,7 @@
u32 valread;
int ret;
- value = mc13892_regulators[id].voltages[selector];
+ value = rdev->desc->volt_table[selector];
mc13xxx_lock(priv->mc13xxx);
ret = mc13xxx_reg_read(priv->mc13xxx,
@@ -469,8 +469,7 @@
}
static struct regulator_ops mc13892_sw_regulator_ops = {
- .is_enabled = mc13xxx_sw_regulator_is_enabled,
- .list_voltage = mc13xxx_regulator_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.set_voltage_sel = mc13892_sw_regulator_set_voltage_sel,
.get_voltage = mc13892_sw_regulator_get_voltage,
};
diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c
index 4fa9704..d6eda28 100644
--- a/drivers/regulator/mc13xxx-regulator-core.c
+++ b/drivers/regulator/mc13xxx-regulator-core.c
@@ -80,20 +80,6 @@
return (val & mc13xxx_regulators[id].enable_bit) != 0;
}
-int mc13xxx_regulator_list_voltage(struct regulator_dev *rdev,
- unsigned selector)
-{
- int id = rdev_get_id(rdev);
- struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev);
- struct mc13xxx_regulator *mc13xxx_regulators = priv->mc13xxx_regulators;
-
- if (selector >= mc13xxx_regulators[id].desc.n_voltages)
- return -EINVAL;
-
- return mc13xxx_regulators[id].voltages[selector];
-}
-EXPORT_SYMBOL_GPL(mc13xxx_regulator_list_voltage);
-
static int mc13xxx_regulator_set_voltage_sel(struct regulator_dev *rdev,
unsigned selector)
{
@@ -135,14 +121,14 @@
BUG_ON(val >= mc13xxx_regulators[id].desc.n_voltages);
- return mc13xxx_regulators[id].voltages[val];
+ return rdev->desc->volt_table[val];
}
struct regulator_ops mc13xxx_regulator_ops = {
.enable = mc13xxx_regulator_enable,
.disable = mc13xxx_regulator_disable,
.is_enabled = mc13xxx_regulator_is_enabled,
- .list_voltage = mc13xxx_regulator_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.set_voltage_sel = mc13xxx_regulator_set_voltage_sel,
.get_voltage = mc13xxx_regulator_get_voltage,
};
@@ -151,15 +137,13 @@
int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev, int min_uV,
int max_uV, unsigned *selector)
{
- struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev);
- struct mc13xxx_regulator *mc13xxx_regulators = priv->mc13xxx_regulators;
int id = rdev_get_id(rdev);
dev_dbg(rdev_get_dev(rdev), "%s id: %d min_uV: %d max_uV: %d\n",
__func__, id, min_uV, max_uV);
- if (min_uV >= mc13xxx_regulators[id].voltages[0] &&
- max_uV <= mc13xxx_regulators[id].voltages[0])
+ if (min_uV <= rdev->desc->volt_table[0] &&
+ rdev->desc->volt_table[0] <= max_uV)
return 0;
else
return -EINVAL;
@@ -168,13 +152,11 @@
int mc13xxx_fixed_regulator_get_voltage(struct regulator_dev *rdev)
{
- struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev);
- struct mc13xxx_regulator *mc13xxx_regulators = priv->mc13xxx_regulators;
int id = rdev_get_id(rdev);
dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id);
- return mc13xxx_regulators[id].voltages[0];
+ return rdev->desc->volt_table[0];
}
EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_get_voltage);
@@ -182,18 +164,12 @@
.enable = mc13xxx_regulator_enable,
.disable = mc13xxx_regulator_disable,
.is_enabled = mc13xxx_regulator_is_enabled,
- .list_voltage = mc13xxx_regulator_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.set_voltage = mc13xxx_fixed_regulator_set_voltage,
.get_voltage = mc13xxx_fixed_regulator_get_voltage,
};
EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_ops);
-int mc13xxx_sw_regulator_is_enabled(struct regulator_dev *rdev)
-{
- return 1;
-}
-EXPORT_SYMBOL_GPL(mc13xxx_sw_regulator_is_enabled);
-
#ifdef CONFIG_OF
int __devinit mc13xxx_get_num_regulators_dt(struct platform_device *pdev)
{
diff --git a/drivers/regulator/mc13xxx.h b/drivers/regulator/mc13xxx.h
index 044aba4..eaff551 100644
--- a/drivers/regulator/mc13xxx.h
+++ b/drivers/regulator/mc13xxx.h
@@ -22,7 +22,6 @@
int vsel_shift;
int vsel_mask;
int hi_bit;
- int const *voltages;
};
struct mc13xxx_regulator_priv {
@@ -33,10 +32,6 @@
struct regulator_dev *regulators[];
};
-extern int mc13xxx_sw_regulator(struct regulator_dev *rdev);
-extern int mc13xxx_sw_regulator_is_enabled(struct regulator_dev *rdev);
-extern int mc13xxx_regulator_list_voltage(struct regulator_dev *rdev,
- unsigned selector);
extern int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV, unsigned *selector);
extern int mc13xxx_fixed_regulator_get_voltage(struct regulator_dev *rdev);
@@ -68,6 +63,7 @@
.desc = { \
.name = #_name, \
.n_voltages = ARRAY_SIZE(_voltages), \
+ .volt_table = _voltages, \
.ops = &_ops, \
.type = REGULATOR_VOLTAGE, \
.id = prefix ## _name, \
@@ -78,7 +74,6 @@
.vsel_reg = prefix ## _vsel_reg, \
.vsel_shift = prefix ## _vsel_reg ## _ ## _name ## VSEL,\
.vsel_mask = prefix ## _vsel_reg ## _ ## _name ## VSEL_M,\
- .voltages = _voltages, \
}
#define MC13xxx_FIXED_DEFINE(prefix, _name, _reg, _voltages, _ops) \
@@ -86,6 +81,7 @@
.desc = { \
.name = #_name, \
.n_voltages = ARRAY_SIZE(_voltages), \
+ .volt_table = _voltages, \
.ops = &_ops, \
.type = REGULATOR_VOLTAGE, \
.id = prefix ## _name, \
@@ -93,7 +89,6 @@
}, \
.reg = prefix ## _reg, \
.enable_bit = prefix ## _reg ## _ ## _name ## EN, \
- .voltages = _voltages, \
}
#define MC13xxx_GPO_DEFINE(prefix, _name, _reg, _voltages, _ops) \
@@ -101,6 +96,7 @@
.desc = { \
.name = #_name, \
.n_voltages = ARRAY_SIZE(_voltages), \
+ .volt_table = _voltages, \
.ops = &_ops, \
.type = REGULATOR_VOLTAGE, \
.id = prefix ## _name, \
@@ -108,7 +104,6 @@
}, \
.reg = prefix ## _reg, \
.enable_bit = prefix ## _reg ## _ ## _name ## EN, \
- .voltages = _voltages, \
}
#define MC13xxx_DEFINE_SW(_name, _reg, _vsel_reg, _voltages, ops) \
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 56593b7..3e4106f 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -20,7 +20,7 @@
struct regulator_init_data **init_data)
{
const __be32 *min_uV, *max_uV, *uV_offset;
- const __be32 *min_uA, *max_uA;
+ const __be32 *min_uA, *max_uA, *ramp_delay;
struct regulation_constraints *constraints = &(*init_data)->constraints;
constraints->name = of_get_property(np, "regulator-name", NULL);
@@ -60,6 +60,10 @@
constraints->always_on = true;
else /* status change should be possible if not always on. */
constraints->valid_ops_mask |= REGULATOR_CHANGE_STATUS;
+
+ ramp_delay = of_get_property(np, "regulator-ramp-delay", NULL);
+ if (ramp_delay)
+ constraints->ramp_delay = be32_to_cpu(*ramp_delay);
}
/**
@@ -88,15 +92,17 @@
EXPORT_SYMBOL_GPL(of_get_regulator_init_data);
/**
- * of_regulator_match - extract regulator init data
+ * of_regulator_match - extract regulator init data when node
+ * property "regulator-compatible" matches with the regulator name.
* @dev: device requesting the data
* @node: parent device node of the regulators
* @matches: match table for the regulators
* @num_matches: number of entries in match table
*
* This function uses a match table specified by the regulator driver and
- * looks up the corresponding init data in the device tree. Note that the
- * match table is modified in place.
+ * looks up the corresponding init data in the device tree if
+ * regulator-compatible matches. Note that the match table is modified
+ * in place.
*
* Returns the number of matches found or a negative error code on failure.
*/
@@ -106,27 +112,40 @@
{
unsigned int count = 0;
unsigned int i;
+ const char *regulator_comp;
+ struct device_node *child;
if (!dev || !node)
return -EINVAL;
- for (i = 0; i < num_matches; i++) {
- struct of_regulator_match *match = &matches[i];
- struct device_node *child;
-
- child = of_find_node_by_name(node, match->name);
- if (!child)
- continue;
-
- match->init_data = of_get_regulator_init_data(dev, child);
- if (!match->init_data) {
- dev_err(dev, "failed to parse DT for regulator %s\n",
+ for_each_child_of_node(node, child) {
+ regulator_comp = of_get_property(child,
+ "regulator-compatible", NULL);
+ if (!regulator_comp) {
+ dev_err(dev, "regulator-compatible is missing for node %s\n",
child->name);
- return -EINVAL;
+ continue;
}
+ for (i = 0; i < num_matches; i++) {
+ struct of_regulator_match *match = &matches[i];
+ if (match->of_node)
+ continue;
- match->of_node = child;
- count++;
+ if (strcmp(match->name, regulator_comp))
+ continue;
+
+ match->init_data =
+ of_get_regulator_init_data(dev, child);
+ if (!match->init_data) {
+ dev_err(dev,
+ "failed to parse DT for regulator %s\n",
+ child->name);
+ return -EINVAL;
+ }
+ match->of_node = child;
+ count++;
+ break;
+ }
}
return count;
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index c4435f6..17d19fb 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -257,8 +257,7 @@
unsigned int reg;
palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®);
- reg &= ~PALMAS_SMPS12_CTRL_STATUS_MASK;
- reg >>= PALMAS_SMPS12_CTRL_STATUS_SHIFT;
+ reg &= ~PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK;
switch (mode) {
case REGULATOR_MODE_NORMAL:
@@ -374,11 +373,22 @@
static int palmas_map_voltage_smps(struct regulator_dev *rdev,
int min_uV, int max_uV)
{
+ struct palmas_pmic *pmic = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
int ret, voltage;
- ret = ((min_uV - 500000) / 10000) + 1;
- if (ret < 0)
- return ret;
+ if (min_uV == 0)
+ return 0;
+
+ if (pmic->range[id]) { /* RANGE is x2 */
+ if (min_uV < 1000000)
+ min_uV = 1000000;
+ ret = DIV_ROUND_UP(min_uV - 1000000, 20000) + 1;
+ } else { /* RANGE is x1 */
+ if (min_uV < 500000)
+ min_uV = 500000;
+ ret = DIV_ROUND_UP(min_uV - 500000, 10000) + 1;
+ }
/* Map back into a voltage to verify we're still in bounds */
voltage = palmas_list_voltage_smps(rdev, ret);
@@ -400,19 +410,14 @@
.map_voltage = palmas_map_voltage_smps,
};
-static int palmas_list_voltage_smps10(struct regulator_dev *dev,
- unsigned selector)
-{
- return 3750000 + (selector * 1250000);
-}
-
static struct regulator_ops palmas_ops_smps10 = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
- .list_voltage = palmas_list_voltage_smps10,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
};
static int palmas_is_enabled_ldo(struct regulator_dev *dev)
@@ -522,7 +527,15 @@
if (ret)
return ret;
- if (id != PALMAS_REG_SMPS10) {
+ switch (id) {
+ case PALMAS_REG_SMPS10:
+ if (reg_init->mode_sleep) {
+ reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK;
+ reg |= reg_init->mode_sleep <<
+ PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT;
+ }
+ break;
+ default:
if (reg_init->warm_reset)
reg |= PALMAS_SMPS12_CTRL_WR_S;
@@ -534,14 +547,8 @@
reg |= reg_init->mode_sleep <<
PALMAS_SMPS12_CTRL_MODE_SLEEP_SHIFT;
}
- } else {
- if (reg_init->mode_sleep) {
- reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK;
- reg |= reg_init->mode_sleep <<
- PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT;
- }
-
}
+
ret = palmas_smps_write(palmas, addr, reg);
if (ret)
return ret;
@@ -665,16 +672,22 @@
pmic->desc[id].name = palmas_regs_info[id].name;
pmic->desc[id].id = id;
- if (id != PALMAS_REG_SMPS10) {
- pmic->desc[id].ops = &palmas_ops_smps;
- pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
- } else {
+ switch (id) {
+ case PALMAS_REG_SMPS10:
pmic->desc[id].n_voltages = PALMAS_SMPS10_NUM_VOLTAGES;
pmic->desc[id].ops = &palmas_ops_smps10;
pmic->desc[id].vsel_reg = PALMAS_SMPS10_CTRL;
pmic->desc[id].vsel_mask = SMPS10_VSEL;
- pmic->desc[id].enable_reg = PALMAS_SMPS10_STATUS;
+ pmic->desc[id].enable_reg =
+ PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+ PALMAS_SMPS10_STATUS);
pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
+ pmic->desc[id].min_uV = 3750000;
+ pmic->desc[id].uV_step = 1250000;
+ break;
+ default:
+ pmic->desc[id].ops = &palmas_ops_smps;
+ pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
}
pmic->desc[id].type = REGULATOR_VOLTAGE;
@@ -739,7 +752,8 @@
pmic->desc[id].type = REGULATOR_VOLTAGE;
pmic->desc[id].owner = THIS_MODULE;
- pmic->desc[id].enable_reg = palmas_regs_info[id].ctrl_addr;
+ pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
+ palmas_regs_info[id].ctrl_addr);
pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE;
if (pdata && pdata->reg_data)
@@ -775,9 +789,6 @@
err_unregister_regulator:
while (--id >= 0)
regulator_unregister(pmic->rdev[id]);
- kfree(pmic->rdev);
- kfree(pmic->desc);
- kfree(pmic);
return ret;
}
@@ -788,10 +799,6 @@
for (id = 0; id < PALMAS_NUM_REGS; id++)
regulator_unregister(pmic->rdev[id]);
-
- kfree(pmic->rdev);
- kfree(pmic->desc);
- kfree(pmic);
return 0;
}
diff --git a/drivers/regulator/pcap-regulator.c b/drivers/regulator/pcap-regulator.c
index 8211101..68777ac 100644
--- a/drivers/regulator/pcap-regulator.c
+++ b/drivers/regulator/pcap-regulator.c
@@ -18,80 +18,80 @@
#include <linux/regulator/machine.h>
#include <linux/mfd/ezx-pcap.h>
-static const u16 V1_table[] = {
- 2775, 1275, 1600, 1725, 1825, 1925, 2075, 2275,
+static const unsigned int V1_table[] = {
+ 2775000, 1275000, 1600000, 1725000, 1825000, 1925000, 2075000, 2275000,
};
-static const u16 V2_table[] = {
- 2500, 2775,
+static const unsigned int V2_table[] = {
+ 2500000, 2775000,
};
-static const u16 V3_table[] = {
- 1075, 1275, 1550, 1725, 1876, 1950, 2075, 2275,
+static const unsigned int V3_table[] = {
+ 1075000, 1275000, 1550000, 1725000, 1876000, 1950000, 2075000, 2275000,
};
-static const u16 V4_table[] = {
- 1275, 1550, 1725, 1875, 1950, 2075, 2275, 2775,
+static const unsigned int V4_table[] = {
+ 1275000, 1550000, 1725000, 1875000, 1950000, 2075000, 2275000, 2775000,
};
-static const u16 V5_table[] = {
- 1875, 2275, 2475, 2775,
+static const unsigned int V5_table[] = {
+ 1875000, 2275000, 2475000, 2775000,
};
-static const u16 V6_table[] = {
- 2475, 2775,
+static const unsigned int V6_table[] = {
+ 2475000, 2775000,
};
-static const u16 V7_table[] = {
- 1875, 2775,
+static const unsigned int V7_table[] = {
+ 1875000, 2775000,
};
#define V8_table V4_table
-static const u16 V9_table[] = {
- 1575, 1875, 2475, 2775,
+static const unsigned int V9_table[] = {
+ 1575000, 1875000, 2475000, 2775000,
};
-static const u16 V10_table[] = {
- 5000,
+static const unsigned int V10_table[] = {
+ 5000000,
};
-static const u16 VAUX1_table[] = {
- 1875, 2475, 2775, 3000,
+static const unsigned int VAUX1_table[] = {
+ 1875000, 2475000, 2775000, 3000000,
};
#define VAUX2_table VAUX1_table
-static const u16 VAUX3_table[] = {
- 1200, 1200, 1200, 1200, 1400, 1600, 1800, 2000,
- 2200, 2400, 2600, 2800, 3000, 3200, 3400, 3600,
+static const unsigned int VAUX3_table[] = {
+ 1200000, 1200000, 1200000, 1200000, 1400000, 1600000, 1800000, 2000000,
+ 2200000, 2400000, 2600000, 2800000, 3000000, 3200000, 3400000, 3600000,
};
-static const u16 VAUX4_table[] = {
- 1800, 1800, 3000, 5000,
+static const unsigned int VAUX4_table[] = {
+ 1800000, 1800000, 3000000, 5000000,
};
-static const u16 VSIM_table[] = {
- 1875, 3000,
+static const unsigned int VSIM_table[] = {
+ 1875000, 3000000,
};
-static const u16 VSIM2_table[] = {
- 1875,
+static const unsigned int VSIM2_table[] = {
+ 1875000,
};
-static const u16 VVIB_table[] = {
- 1300, 1800, 2000, 3000,
+static const unsigned int VVIB_table[] = {
+ 1300000, 1800000, 2000000, 3000000,
};
-static const u16 SW1_table[] = {
- 900, 950, 1000, 1050, 1100, 1150, 1200, 1250,
- 1300, 1350, 1400, 1450, 1500, 1600, 1875, 2250,
+static const unsigned int SW1_table[] = {
+ 900000, 950000, 1000000, 1050000, 1100000, 1150000, 1200000, 1250000,
+ 1300000, 1350000, 1400000, 1450000, 1500000, 1600000, 1875000, 2250000,
};
#define SW2_table SW1_table
-static const u16 SW3_table[] = {
- 4000, 4500, 5000, 5500,
+static const unsigned int SW3_table[] = {
+ 4000000, 4500000, 5000000, 5500000,
};
struct pcap_regulator {
@@ -100,8 +100,6 @@
const u8 index;
const u8 stby;
const u8 lowpwr;
- const u8 n_voltages;
- const u16 *voltage_table;
};
#define NA 0xff
@@ -113,8 +111,6 @@
.index = _index, \
.stby = _stby, \
.lowpwr = _lowpwr, \
- .n_voltages = ARRAY_SIZE(_vreg##_table), \
- .voltage_table = _vreg##_table, \
}
static struct pcap_regulator vreg_table[] = {
@@ -157,11 +153,11 @@
void *pcap = rdev_get_drvdata(rdev);
/* the regulator doesn't support voltage switching */
- if (vreg->n_voltages == 1)
+ if (rdev->desc->n_voltages == 1)
return -EINVAL;
return ezx_pcap_set_bits(pcap, vreg->reg,
- (vreg->n_voltages - 1) << vreg->index,
+ (rdev->desc->n_voltages - 1) << vreg->index,
selector << vreg->index);
}
@@ -171,11 +167,11 @@
void *pcap = rdev_get_drvdata(rdev);
u32 tmp;
- if (vreg->n_voltages == 1)
+ if (rdev->desc->n_voltages == 1)
return 0;
ezx_pcap_read(pcap, vreg->reg, &tmp);
- tmp = ((tmp >> vreg->index) & (vreg->n_voltages - 1));
+ tmp = ((tmp >> vreg->index) & (rdev->desc->n_voltages - 1));
return tmp;
}
@@ -214,16 +210,8 @@
return (tmp >> vreg->en) & 1;
}
-static int pcap_regulator_list_voltage(struct regulator_dev *rdev,
- unsigned int index)
-{
- struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
-
- return vreg->voltage_table[index] * 1000;
-}
-
static struct regulator_ops pcap_regulator_ops = {
- .list_voltage = pcap_regulator_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.set_voltage_sel = pcap_regulator_set_voltage_sel,
.get_voltage_sel = pcap_regulator_get_voltage_sel,
.enable = pcap_regulator_enable,
@@ -236,6 +224,7 @@
.name = #_vreg, \
.id = _vreg, \
.n_voltages = ARRAY_SIZE(_vreg##_table), \
+ .volt_table = _vreg##_table, \
.ops = &pcap_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c
index 3c9d14c..092e5cb 100644
--- a/drivers/regulator/pcf50633-regulator.c
+++ b/drivers/regulator/pcf50633-regulator.c
@@ -100,13 +100,12 @@
return 900 + (bits * 100);
}
-static int pcf50633_regulator_set_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV,
- unsigned *selector)
+static int pcf50633_regulator_map_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
{
struct pcf50633 *pcf;
int regulator_id, millivolts;
- u8 volt_bits, regnr;
+ u8 volt_bits;
pcf = rdev_get_drvdata(rdev);
@@ -116,15 +115,11 @@
millivolts = min_uV / 1000;
- regnr = rdev->desc->vsel_reg;
-
switch (regulator_id) {
case PCF50633_REGULATOR_AUTO:
volt_bits = auto_voltage_bits(millivolts);
break;
case PCF50633_REGULATOR_DOWN1:
- volt_bits = down_voltage_bits(millivolts);
- break;
case PCF50633_REGULATOR_DOWN2:
volt_bits = down_voltage_bits(millivolts);
break;
@@ -142,9 +137,7 @@
return -EINVAL;
}
- *selector = volt_bits;
-
- return pcf50633_reg_write(pcf, regnr, volt_bits);
+ return volt_bits;
}
static int pcf50633_regulator_list_voltage(struct regulator_dev *rdev,
@@ -159,8 +152,6 @@
millivolts = auto_voltage_value(index);
break;
case PCF50633_REGULATOR_DOWN1:
- millivolts = down_voltage_value(index);
- break;
case PCF50633_REGULATOR_DOWN2:
millivolts = down_voltage_value(index);
break;
@@ -182,9 +173,10 @@
}
static struct regulator_ops pcf50633_regulator_ops = {
- .set_voltage = pcf50633_regulator_set_voltage,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = pcf50633_regulator_list_voltage,
+ .map_voltage = pcf50633_regulator_map_voltage,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
diff --git a/drivers/regulator/rc5t583-regulator.c b/drivers/regulator/rc5t583-regulator.c
index 1d34e64..8bf4e8c9 100644
--- a/drivers/regulator/rc5t583-regulator.c
+++ b/drivers/regulator/rc5t583-regulator.c
@@ -42,7 +42,6 @@
/* Regulator specific turn-on delay and voltage settling time*/
int enable_uv_per_us;
- int change_uv_per_us;
/* Used by regulator core */
struct regulator_desc desc;
@@ -66,25 +65,6 @@
return DIV_ROUND_UP(curr_uV, reg->reg_info->enable_uv_per_us);
}
-static int rc5t583_set_voltage_time_sel(struct regulator_dev *rdev,
- unsigned int old_selector, unsigned int new_selector)
-{
- struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
- int old_uV, new_uV;
- old_uV = regulator_list_voltage_linear(rdev, old_selector);
-
- if (old_uV < 0)
- return old_uV;
-
- new_uV = regulator_list_voltage_linear(rdev, new_selector);
- if (new_uV < 0)
- return new_uV;
-
- return DIV_ROUND_UP(abs(old_uV - new_uV),
- reg->reg_info->change_uv_per_us);
-}
-
-
static struct regulator_ops rc5t583_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
@@ -94,7 +74,7 @@
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
- .set_voltage_time_sel = rc5t583_set_voltage_time_sel,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
};
#define RC5T583_REG(_id, _en_reg, _en_bit, _disc_reg, _disc_bit, \
@@ -104,7 +84,6 @@
.disc_bit = _disc_bit, \
.deepsleep_reg = RC5T583_REG_##_id##DAC_DS, \
.enable_uv_per_us = _enable_mv * 1000, \
- .change_uv_per_us = 40 * 1000, \
.deepsleep_id = RC5T583_DS_##_id, \
.desc = { \
.name = "rc5t583-regulator-"#_id, \
@@ -119,6 +98,7 @@
.enable_mask = BIT(_en_bit), \
.min_uV = _min_mv * 1000, \
.uV_step = _step_uV, \
+ .ramp_delay = 40 * 1000, \
}, \
}
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
new file mode 100644
index 0000000..4669dc9
--- /dev/null
+++ b/drivers/regulator/s2mps11.c
@@ -0,0 +1,363 @@
+/*
+ * s2mps11.c
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/samsung/core.h>
+#include <linux/mfd/samsung/s2mps11.h>
+
+struct s2mps11_info {
+ struct regulator_dev **rdev;
+
+ int ramp_delay2;
+ int ramp_delay34;
+ int ramp_delay5;
+ int ramp_delay16;
+ int ramp_delay7810;
+ int ramp_delay9;
+
+ bool buck6_ramp;
+ bool buck2_ramp;
+ bool buck3_ramp;
+ bool buck4_ramp;
+};
+
+static int get_ramp_delay(int ramp_delay)
+{
+ unsigned char cnt = 0;
+
+ ramp_delay /= 6;
+
+ while (true) {
+ ramp_delay = ramp_delay >> 1;
+ if (ramp_delay == 0)
+ break;
+ cnt++;
+ }
+ return cnt;
+}
+
+static struct regulator_ops s2mps11_ldo_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static struct regulator_ops s2mps11_buck_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+#define regulator_desc_ldo1(num) { \
+ .name = "LDO"#num, \
+ .id = S2MPS11_LDO##num, \
+ .ops = &s2mps11_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPS11_LDO_MIN, \
+ .uV_step = S2MPS11_LDO_STEP1, \
+ .n_voltages = S2MPS11_LDO_N_VOLTAGES, \
+ .vsel_reg = S2MPS11_REG_L1CTRL + num - 1, \
+ .vsel_mask = S2MPS11_LDO_VSEL_MASK, \
+ .enable_reg = S2MPS11_REG_L1CTRL + num - 1, \
+ .enable_mask = S2MPS11_ENABLE_MASK \
+}
+#define regulator_desc_ldo2(num) { \
+ .name = "LDO"#num, \
+ .id = S2MPS11_LDO##num, \
+ .ops = &s2mps11_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPS11_LDO_MIN, \
+ .uV_step = S2MPS11_LDO_STEP2, \
+ .n_voltages = S2MPS11_LDO_N_VOLTAGES, \
+ .vsel_reg = S2MPS11_REG_L1CTRL + num - 1, \
+ .vsel_mask = S2MPS11_LDO_VSEL_MASK, \
+ .enable_reg = S2MPS11_REG_L1CTRL + num - 1, \
+ .enable_mask = S2MPS11_ENABLE_MASK \
+}
+
+#define regulator_desc_buck1_4(num) { \
+ .name = "BUCK"#num, \
+ .id = S2MPS11_BUCK##num, \
+ .ops = &s2mps11_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPS11_BUCK_MIN1, \
+ .uV_step = S2MPS11_BUCK_STEP1, \
+ .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
+ .vsel_reg = S2MPS11_REG_B1CTRL2 + (num - 1) * 2, \
+ .vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPS11_REG_B1CTRL1 + (num - 1) * 2, \
+ .enable_mask = S2MPS11_ENABLE_MASK \
+}
+
+#define regulator_desc_buck5 { \
+ .name = "BUCK5", \
+ .id = S2MPS11_BUCK5, \
+ .ops = &s2mps11_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPS11_BUCK_MIN1, \
+ .uV_step = S2MPS11_BUCK_STEP1, \
+ .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
+ .vsel_reg = S2MPS11_REG_B5CTRL2, \
+ .vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPS11_REG_B5CTRL1, \
+ .enable_mask = S2MPS11_ENABLE_MASK \
+}
+
+#define regulator_desc_buck6_8(num) { \
+ .name = "BUCK"#num, \
+ .id = S2MPS11_BUCK##num, \
+ .ops = &s2mps11_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPS11_BUCK_MIN1, \
+ .uV_step = S2MPS11_BUCK_STEP1, \
+ .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
+ .vsel_reg = S2MPS11_REG_B6CTRL2 + (num - 6) * 2, \
+ .vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPS11_REG_B6CTRL1 + (num - 6) * 2, \
+ .enable_mask = S2MPS11_ENABLE_MASK \
+}
+
+#define regulator_desc_buck9 { \
+ .name = "BUCK9", \
+ .id = S2MPS11_BUCK9, \
+ .ops = &s2mps11_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPS11_BUCK_MIN3, \
+ .uV_step = S2MPS11_BUCK_STEP3, \
+ .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
+ .vsel_reg = S2MPS11_REG_B9CTRL2, \
+ .vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPS11_REG_B9CTRL1, \
+ .enable_mask = S2MPS11_ENABLE_MASK \
+}
+
+#define regulator_desc_buck10 { \
+ .name = "BUCK10", \
+ .id = S2MPS11_BUCK10, \
+ .ops = &s2mps11_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPS11_BUCK_MIN2, \
+ .uV_step = S2MPS11_BUCK_STEP2, \
+ .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
+ .vsel_reg = S2MPS11_REG_B9CTRL2, \
+ .vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPS11_REG_B9CTRL1, \
+ .enable_mask = S2MPS11_ENABLE_MASK \
+}
+
+static struct regulator_desc regulators[] = {
+ regulator_desc_ldo2(1),
+ regulator_desc_ldo1(2),
+ regulator_desc_ldo1(3),
+ regulator_desc_ldo1(4),
+ regulator_desc_ldo1(5),
+ regulator_desc_ldo2(6),
+ regulator_desc_ldo1(7),
+ regulator_desc_ldo1(8),
+ regulator_desc_ldo1(9),
+ regulator_desc_ldo1(10),
+ regulator_desc_ldo2(11),
+ regulator_desc_ldo1(12),
+ regulator_desc_ldo1(13),
+ regulator_desc_ldo1(14),
+ regulator_desc_ldo1(15),
+ regulator_desc_ldo1(16),
+ regulator_desc_ldo1(17),
+ regulator_desc_ldo1(18),
+ regulator_desc_ldo1(19),
+ regulator_desc_ldo1(20),
+ regulator_desc_ldo1(21),
+ regulator_desc_ldo2(22),
+ regulator_desc_ldo2(23),
+ regulator_desc_ldo1(24),
+ regulator_desc_ldo1(25),
+ regulator_desc_ldo1(26),
+ regulator_desc_ldo2(27),
+ regulator_desc_ldo1(28),
+ regulator_desc_ldo1(29),
+ regulator_desc_ldo1(30),
+ regulator_desc_ldo1(31),
+ regulator_desc_ldo1(32),
+ regulator_desc_ldo1(33),
+ regulator_desc_ldo1(34),
+ regulator_desc_ldo1(35),
+ regulator_desc_ldo1(36),
+ regulator_desc_ldo1(37),
+ regulator_desc_ldo1(38),
+ regulator_desc_buck1_4(1),
+ regulator_desc_buck1_4(2),
+ regulator_desc_buck1_4(3),
+ regulator_desc_buck1_4(4),
+ regulator_desc_buck5,
+ regulator_desc_buck6_8(6),
+ regulator_desc_buck6_8(7),
+ regulator_desc_buck6_8(8),
+ regulator_desc_buck9,
+ regulator_desc_buck10,
+};
+
+static __devinit int s2mps11_pmic_probe(struct platform_device *pdev)
+{
+ struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
+ struct regulator_config config = { };
+ struct regulator_dev **rdev;
+ struct s2mps11_info *s2mps11;
+ int i, ret, size;
+ unsigned char ramp_enable, ramp_reg = 0;
+
+ if (!pdata) {
+ dev_err(pdev->dev.parent, "Platform data not supplied\n");
+ return -ENODEV;
+ }
+
+ s2mps11 = devm_kzalloc(&pdev->dev, sizeof(struct s2mps11_info),
+ GFP_KERNEL);
+ if (!s2mps11)
+ return -ENOMEM;
+
+ size = sizeof(struct regulator_dev *) * S2MPS11_REGULATOR_MAX;
+ s2mps11->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+ if (!s2mps11->rdev) {
+ return -ENOMEM;
+ }
+
+ rdev = s2mps11->rdev;
+ platform_set_drvdata(pdev, s2mps11);
+
+ s2mps11->ramp_delay2 = pdata->buck2_ramp_delay;
+ s2mps11->ramp_delay34 = pdata->buck34_ramp_delay;
+ s2mps11->ramp_delay5 = pdata->buck5_ramp_delay;
+ s2mps11->ramp_delay16 = pdata->buck16_ramp_delay;
+ s2mps11->ramp_delay7810 = pdata->buck7810_ramp_delay;
+ s2mps11->ramp_delay9 = pdata->buck9_ramp_delay;
+
+ s2mps11->buck6_ramp = pdata->buck6_ramp_enable;
+ s2mps11->buck2_ramp = pdata->buck2_ramp_enable;
+ s2mps11->buck3_ramp = pdata->buck3_ramp_enable;
+ s2mps11->buck4_ramp = pdata->buck4_ramp_enable;
+
+ ramp_enable = (s2mps11->buck2_ramp << 3) | (s2mps11->buck3_ramp << 2) |
+ (s2mps11->buck4_ramp << 1) | s2mps11->buck6_ramp ;
+
+ if (ramp_enable) {
+ if (s2mps11->buck2_ramp)
+ ramp_reg |= get_ramp_delay(s2mps11->ramp_delay2) >> 6;
+ if (s2mps11->buck3_ramp || s2mps11->buck4_ramp)
+ ramp_reg |= get_ramp_delay(s2mps11->ramp_delay34) >> 4;
+ sec_reg_write(iodev, S2MPS11_REG_RAMP, ramp_reg | ramp_enable);
+ }
+
+ ramp_reg &= 0x00;
+ ramp_reg |= get_ramp_delay(s2mps11->ramp_delay5) >> 6;
+ ramp_reg |= get_ramp_delay(s2mps11->ramp_delay16) >> 4;
+ ramp_reg |= get_ramp_delay(s2mps11->ramp_delay7810) >> 2;
+ ramp_reg |= get_ramp_delay(s2mps11->ramp_delay9);
+ sec_reg_write(iodev, S2MPS11_REG_RAMP_BUCK, ramp_reg);
+
+ for (i = 0; i < S2MPS11_REGULATOR_MAX; i++) {
+
+ config.dev = &pdev->dev;
+ config.regmap = iodev->regmap;
+ config.init_data = pdata->regulators[i].initdata;
+ config.driver_data = s2mps11;
+
+ rdev[i] = regulator_register(®ulators[i], &config);
+ if (IS_ERR(rdev[i])) {
+ ret = PTR_ERR(rdev[i]);
+ dev_err(&pdev->dev, "regulator init failed for %d\n",
+ i);
+ rdev[i] = NULL;
+ goto err;
+ }
+ }
+
+ return 0;
+err:
+ for (i = 0; i < S2MPS11_REGULATOR_MAX; i++)
+ if (rdev[i])
+ regulator_unregister(rdev[i]);
+
+ return ret;
+}
+
+static int __devexit s2mps11_pmic_remove(struct platform_device *pdev)
+{
+ struct s2mps11_info *s2mps11 = platform_get_drvdata(pdev);
+ struct regulator_dev **rdev = s2mps11->rdev;
+ int i;
+
+ for (i = 0; i < S2MPS11_REGULATOR_MAX; i++)
+ if (rdev[i])
+ regulator_unregister(rdev[i]);
+
+ return 0;
+}
+
+static const struct platform_device_id s2mps11_pmic_id[] = {
+ { "s2mps11-pmic", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(platform, s2mps11_pmic_id);
+
+static struct platform_driver s2mps11_pmic_driver = {
+ .driver = {
+ .name = "s2mps11-pmic",
+ .owner = THIS_MODULE,
+ },
+ .probe = s2mps11_pmic_probe,
+ .remove = __devexit_p(s2mps11_pmic_remove),
+ .id_table = s2mps11_pmic_id,
+};
+
+static int __init s2mps11_pmic_init(void)
+{
+ return platform_driver_register(&s2mps11_pmic_driver);
+}
+subsys_initcall(s2mps11_pmic_init);
+
+static void __exit s2mps11_pmic_exit(void)
+{
+ platform_driver_unregister(&s2mps11_pmic_driver);
+}
+module_exit(s2mps11_pmic_exit);
+
+/* Module information */
+MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
+MODULE_DESCRIPTION("SAMSUNG S2MPS11 Regulator Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 290d6fc..102287f 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -41,6 +41,7 @@
u8 buck3_vol[8];
u8 buck4_vol[8];
int buck_gpios[3];
+ int buck_ds[3];
int buck_gpioindex;
};
@@ -120,27 +121,6 @@
[S5M8767_BUCK9] = &buck_voltage_val3,
};
-static int s5m8767_list_voltage(struct regulator_dev *rdev,
- unsigned int selector)
-{
- const struct s5m_voltage_desc *desc;
- int reg_id = rdev_get_id(rdev);
- int val;
-
- if (reg_id >= ARRAY_SIZE(reg_voltage_map) || reg_id < 0)
- return -EINVAL;
-
- desc = reg_voltage_map[reg_id];
- if (desc == NULL)
- return -EINVAL;
-
- val = desc->min + desc->step * selector;
- if (val > desc->max)
- return -EINVAL;
-
- return val;
-}
-
static unsigned int s5m8767_opmode_reg[][4] = {
/* {OFF, ON, LOWPOWER, SUSPEND} */
/* LDO1 ... LDO28 */
@@ -283,17 +263,17 @@
reg = S5M8767_REG_BUCK1CTRL2;
break;
case S5M8767_BUCK2:
- reg = S5M8767_REG_BUCK2DVS1;
+ reg = S5M8767_REG_BUCK2DVS2;
if (s5m8767->buck2_gpiodvs)
reg += s5m8767->buck_gpioindex;
break;
case S5M8767_BUCK3:
- reg = S5M8767_REG_BUCK3DVS1;
+ reg = S5M8767_REG_BUCK3DVS2;
if (s5m8767->buck3_gpiodvs)
reg += s5m8767->buck_gpioindex;
break;
case S5M8767_BUCK4:
- reg = S5M8767_REG_BUCK4DVS1;
+ reg = S5M8767_REG_BUCK4DVS2;
if (s5m8767->buck4_gpiodvs)
reg += s5m8767->buck_gpioindex;
break;
@@ -357,32 +337,34 @@
return selector;
}
-static inline void s5m8767_set_high(struct s5m8767_info *s5m8767)
+static inline int s5m8767_set_high(struct s5m8767_info *s5m8767)
{
int temp_index = s5m8767->buck_gpioindex;
gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1);
gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1);
gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1);
+
+ return 0;
}
-static inline void s5m8767_set_low(struct s5m8767_info *s5m8767)
+static inline int s5m8767_set_low(struct s5m8767_info *s5m8767)
{
int temp_index = s5m8767->buck_gpioindex;
gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1);
gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1);
gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1);
+
+ return 0;
}
-static int s5m8767_set_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV, unsigned *selector)
+static int s5m8767_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned selector)
{
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
- const struct s5m_voltage_desc *desc;
int reg_id = rdev_get_id(rdev);
- int sel, reg, mask, ret = 0, old_index, index = 0;
- u8 val;
+ int reg, mask, ret = 0, old_index, index = 0;
u8 *buck234_vol = NULL;
switch (reg_id) {
@@ -407,15 +389,9 @@
return -EINVAL;
}
- desc = reg_voltage_map[reg_id];
-
- sel = s5m8767_convert_voltage_to_sel(desc, min_uV, max_uV);
- if (sel < 0)
- return sel;
-
/* buck234_vol != NULL means to control buck234 voltage via DVS GPIO */
if (buck234_vol) {
- while (*buck234_vol != sel) {
+ while (*buck234_vol != selector) {
buck234_vol++;
index++;
}
@@ -423,22 +399,16 @@
s5m8767->buck_gpioindex = index;
if (index > old_index)
- s5m8767_set_high(s5m8767);
+ return s5m8767_set_high(s5m8767);
else
- s5m8767_set_low(s5m8767);
+ return s5m8767_set_low(s5m8767);
} else {
ret = s5m8767_get_voltage_register(rdev, ®);
if (ret)
return ret;
- s5m_reg_read(s5m8767->iodev, reg, &val);
- val = (val & ~mask) | sel;
-
- ret = s5m_reg_write(s5m8767->iodev, reg, val);
+ return s5m_reg_update(s5m8767->iodev, reg, selector, mask);
}
-
- *selector = sel;
- return ret;
}
static int s5m8767_set_voltage_time_sel(struct regulator_dev *rdev,
@@ -451,22 +421,28 @@
desc = reg_voltage_map[reg_id];
- if (old_sel < new_sel)
+ if ((old_sel < new_sel) && s5m8767->ramp_delay)
return DIV_ROUND_UP(desc->step * (new_sel - old_sel),
s5m8767->ramp_delay * 1000);
return 0;
}
static struct regulator_ops s5m8767_ops = {
- .list_voltage = s5m8767_list_voltage,
+ .list_voltage = regulator_list_voltage_linear,
.is_enabled = s5m8767_reg_is_enabled,
.enable = s5m8767_reg_enable,
.disable = s5m8767_reg_disable,
.get_voltage_sel = s5m8767_get_voltage_sel,
- .set_voltage = s5m8767_set_voltage,
+ .set_voltage_sel = s5m8767_set_voltage_sel,
.set_voltage_time_sel = s5m8767_set_voltage_time_sel,
};
+static struct regulator_ops s5m8767_buck78_ops = {
+ .is_enabled = s5m8767_reg_is_enabled,
+ .enable = s5m8767_reg_enable,
+ .disable = s5m8767_reg_disable,
+};
+
#define s5m8767_regulator_desc(_name) { \
.name = #_name, \
.id = S5M8767_##_name, \
@@ -475,6 +451,14 @@
.owner = THIS_MODULE, \
}
+#define s5m8767_regulator_buck78_desc(_name) { \
+ .name = #_name, \
+ .id = S5M8767_##_name, \
+ .ops = &s5m8767_buck78_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+}
+
static struct regulator_desc regulators[] = {
s5m8767_regulator_desc(LDO1),
s5m8767_regulator_desc(LDO2),
@@ -510,8 +494,8 @@
s5m8767_regulator_desc(BUCK4),
s5m8767_regulator_desc(BUCK5),
s5m8767_regulator_desc(BUCK6),
- s5m8767_regulator_desc(BUCK7),
- s5m8767_regulator_desc(BUCK8),
+ s5m8767_regulator_buck78_desc(BUCK7),
+ s5m8767_regulator_buck78_desc(BUCK8),
s5m8767_regulator_desc(BUCK9),
};
@@ -522,7 +506,7 @@
struct regulator_config config = { };
struct regulator_dev **rdev;
struct s5m8767_info *s5m8767;
- int i, ret, size;
+ int i, ret, size, buck_init;
if (!pdata) {
dev_err(pdev->dev.parent, "Platform data not supplied\n");
@@ -573,12 +557,37 @@
s5m8767->buck_gpios[0] = pdata->buck_gpios[0];
s5m8767->buck_gpios[1] = pdata->buck_gpios[1];
s5m8767->buck_gpios[2] = pdata->buck_gpios[2];
+ s5m8767->buck_ds[0] = pdata->buck_ds[0];
+ s5m8767->buck_ds[1] = pdata->buck_ds[1];
+ s5m8767->buck_ds[2] = pdata->buck_ds[2];
+
s5m8767->ramp_delay = pdata->buck_ramp_delay;
s5m8767->buck2_ramp = pdata->buck2_ramp_enable;
s5m8767->buck3_ramp = pdata->buck3_ramp_enable;
s5m8767->buck4_ramp = pdata->buck4_ramp_enable;
s5m8767->opmode = pdata->opmode;
+ buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
+ pdata->buck2_init,
+ pdata->buck2_init +
+ buck_voltage_val2.step);
+
+ s5m_reg_write(s5m8767->iodev, S5M8767_REG_BUCK2DVS2, buck_init);
+
+ buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
+ pdata->buck3_init,
+ pdata->buck3_init +
+ buck_voltage_val2.step);
+
+ s5m_reg_write(s5m8767->iodev, S5M8767_REG_BUCK3DVS2, buck_init);
+
+ buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
+ pdata->buck4_init,
+ pdata->buck4_init +
+ buck_voltage_val2.step);
+
+ s5m_reg_write(s5m8767->iodev, S5M8767_REG_BUCK4DVS2, buck_init);
+
for (i = 0; i < 8; i++) {
if (s5m8767->buck2_gpiodvs) {
s5m8767->buck2_vol[i] =
@@ -608,48 +617,70 @@
}
}
- if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
- pdata->buck4_gpiodvs) {
- if (gpio_is_valid(pdata->buck_gpios[0]) &&
- gpio_is_valid(pdata->buck_gpios[1]) &&
- gpio_is_valid(pdata->buck_gpios[2])) {
- ret = gpio_request(pdata->buck_gpios[0],
- "S5M8767 SET1");
- if (ret == -EBUSY)
- dev_warn(&pdev->dev, "Duplicated gpio request for SET1\n");
-
- ret = gpio_request(pdata->buck_gpios[1],
- "S5M8767 SET2");
- if (ret == -EBUSY)
- dev_warn(&pdev->dev, "Duplicated gpio request for SET2\n");
-
- ret = gpio_request(pdata->buck_gpios[2],
- "S5M8767 SET3");
- if (ret == -EBUSY)
- dev_warn(&pdev->dev, "Duplicated gpio request for SET3\n");
- /* SET1 GPIO */
- gpio_direction_output(pdata->buck_gpios[0],
- (s5m8767->buck_gpioindex >> 2) & 0x1);
- /* SET2 GPIO */
- gpio_direction_output(pdata->buck_gpios[1],
- (s5m8767->buck_gpioindex >> 1) & 0x1);
- /* SET3 GPIO */
- gpio_direction_output(pdata->buck_gpios[2],
- (s5m8767->buck_gpioindex >> 0) & 0x1);
- ret = 0;
- } else {
- dev_err(&pdev->dev, "GPIO NOT VALID\n");
- ret = -EINVAL;
+ if (gpio_is_valid(pdata->buck_gpios[0]) &&
+ gpio_is_valid(pdata->buck_gpios[1]) &&
+ gpio_is_valid(pdata->buck_gpios[2])) {
+ ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[0],
+ "S5M8767 SET1");
+ if (ret)
return ret;
- }
+
+ ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[1],
+ "S5M8767 SET2");
+ if (ret)
+ return ret;
+
+ ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[2],
+ "S5M8767 SET3");
+ if (ret)
+ return ret;
+
+ /* SET1 GPIO */
+ gpio_direction_output(pdata->buck_gpios[0],
+ (s5m8767->buck_gpioindex >> 2) & 0x1);
+ /* SET2 GPIO */
+ gpio_direction_output(pdata->buck_gpios[1],
+ (s5m8767->buck_gpioindex >> 1) & 0x1);
+ /* SET3 GPIO */
+ gpio_direction_output(pdata->buck_gpios[2],
+ (s5m8767->buck_gpioindex >> 0) & 0x1);
+ } else {
+ dev_err(&pdev->dev, "GPIO NOT VALID\n");
+ ret = -EINVAL;
+ return ret;
}
- s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK2CTRL,
- (pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1), 1 << 1);
- s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK3CTRL,
- (pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1), 1 << 1);
- s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK4CTRL,
- (pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1), 1 << 1);
+ ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[0], "S5M8767 DS2");
+ if (ret)
+ return ret;
+
+ ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[1], "S5M8767 DS3");
+ if (ret)
+ return ret;
+
+ ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[2], "S5M8767 DS4");
+ if (ret)
+ return ret;
+
+ /* DS2 GPIO */
+ gpio_direction_output(pdata->buck_ds[0], 0x0);
+ /* DS3 GPIO */
+ gpio_direction_output(pdata->buck_ds[1], 0x0);
+ /* DS4 GPIO */
+ gpio_direction_output(pdata->buck_ds[2], 0x0);
+
+ if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
+ pdata->buck4_gpiodvs) {
+ s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK2CTRL,
+ (pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1),
+ 1 << 1);
+ s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK3CTRL,
+ (pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1),
+ 1 << 1);
+ s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK4CTRL,
+ (pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1),
+ 1 << 1);
+ }
/* Initialize GPIO DVS registers */
for (i = 0; i < 8; i++) {
@@ -668,9 +699,6 @@
s5m8767->buck4_vol[i]);
}
}
- s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK2CTRL, 0x78, 0xff);
- s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK3CTRL, 0x58, 0xff);
- s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK4CTRL, 0x78, 0xff);
if (s5m8767->buck2_ramp)
s5m_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP, 0x08, 0x08);
@@ -684,9 +712,13 @@
if (s5m8767->buck2_ramp || s5m8767->buck3_ramp
|| s5m8767->buck4_ramp) {
switch (s5m8767->ramp_delay) {
- case 15:
+ case 5:
s5m_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
- 0xc0, 0xf0);
+ 0x40, 0xf0);
+ break;
+ case 10:
+ s5m_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
+ 0x90, 0xf0);
break;
case 25:
s5m_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
@@ -711,9 +743,12 @@
int id = pdata->regulators[i].id;
desc = reg_voltage_map[id];
- if (desc)
+ if (desc) {
regulators[id].n_voltages =
(desc->max - desc->min) / desc->step + 1;
+ regulators[id].min_uV = desc->min;
+ regulators[id].uV_step = desc->step;
+ }
config.dev = s5m8767->dev;
config.init_data = pdata->regulators[i].initdata;
diff --git a/drivers/regulator/tps6105x-regulator.c b/drivers/regulator/tps6105x-regulator.c
index d840d84..1378409 100644
--- a/drivers/regulator/tps6105x-regulator.c
+++ b/drivers/regulator/tps6105x-regulator.c
@@ -20,7 +20,7 @@
#include <linux/mfd/core.h>
#include <linux/mfd/tps6105x.h>
-static const int tps6105x_voltages[] = {
+static const unsigned int tps6105x_voltages[] = {
4500000,
5000000,
5250000,
@@ -105,22 +105,13 @@
return 0;
}
-static int tps6105x_regulator_list_voltage(struct regulator_dev *rdev,
- unsigned selector)
-{
- if (selector >= ARRAY_SIZE(tps6105x_voltages))
- return -EINVAL;
-
- return tps6105x_voltages[selector];
-}
-
static struct regulator_ops tps6105x_regulator_ops = {
.enable = tps6105x_regulator_enable,
.disable = tps6105x_regulator_disable,
.is_enabled = tps6105x_regulator_is_enabled,
.get_voltage_sel = tps6105x_regulator_get_voltage_sel,
.set_voltage_sel = tps6105x_regulator_set_voltage_sel,
- .list_voltage = tps6105x_regulator_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
};
static const struct regulator_desc tps6105x_regulator_desc = {
@@ -130,6 +121,7 @@
.id = 0,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(tps6105x_voltages),
+ .volt_table = tps6105x_voltages,
};
/*
diff --git a/drivers/regulator/tps62360-regulator.c b/drivers/regulator/tps62360-regulator.c
index e534269..68729a7 100644
--- a/drivers/regulator/tps62360-regulator.c
+++ b/drivers/regulator/tps62360-regulator.c
@@ -65,10 +65,8 @@
struct regulator_desc desc;
struct regulator_dev *rdev;
struct regmap *regmap;
- int chip_id;
int vsel0_gpio;
int vsel1_gpio;
- int voltage_base;
u8 voltage_reg_mask;
bool en_internal_pulldn;
bool en_discharge;
@@ -76,7 +74,6 @@
int lru_index[4];
int curr_vset_vsel[4];
int curr_vset_id;
- int change_uv_per_us;
};
/*
@@ -175,23 +172,6 @@
return 0;
}
-static int tps62360_set_voltage_time_sel(struct regulator_dev *rdev,
- unsigned int old_selector, unsigned int new_selector)
-{
- struct tps62360_chip *tps = rdev_get_drvdata(rdev);
- int old_uV, new_uV;
-
- old_uV = regulator_list_voltage_linear(rdev, old_selector);
- if (old_uV < 0)
- return old_uV;
-
- new_uV = regulator_list_voltage_linear(rdev, new_selector);
- if (new_uV < 0)
- return new_uV;
-
- return DIV_ROUND_UP(abs(old_uV - new_uV), tps->change_uv_per_us);
-}
-
static int tps62360_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct tps62360_chip *tps = rdev_get_drvdata(rdev);
@@ -258,7 +238,7 @@
.set_voltage_sel = tps62360_dcdc_set_voltage_sel,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
- .set_voltage_time_sel = tps62360_set_voltage_time_sel,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_mode = tps62360_set_mode,
.get_mode = tps62360_get_mode,
};
@@ -301,7 +281,7 @@
ramp_ctrl = (ramp_ctrl >> 4) & 0x7;
/* ramp mV/us = 32/(2^ramp_ctrl) */
- tps->change_uv_per_us = DIV_ROUND_UP(32000, BIT(ramp_ctrl));
+ tps->desc.ramp_delay = DIV_ROUND_UP(32000, BIT(ramp_ctrl));
return ret;
}
@@ -408,13 +388,13 @@
switch (chip_id) {
case TPS62360:
case TPS62362:
- tps->voltage_base = TPS62360_BASE_VOLTAGE;
+ tps->desc.min_uV = TPS62360_BASE_VOLTAGE;
tps->voltage_reg_mask = 0x3F;
tps->desc.n_voltages = TPS62360_N_VOLTAGES;
break;
case TPS62361:
case TPS62363:
- tps->voltage_base = TPS62361_BASE_VOLTAGE;
+ tps->desc.min_uV = TPS62361_BASE_VOLTAGE;
tps->voltage_reg_mask = 0x7F;
tps->desc.n_voltages = TPS62361_N_VOLTAGES;
break;
@@ -427,7 +407,6 @@
tps->desc.ops = &tps62360_dcdc_ops;
tps->desc.type = REGULATOR_VOLTAGE;
tps->desc.owner = THIS_MODULE;
- tps->desc.min_uV = tps->voltage_base;
tps->desc.uV_step = 10000;
tps->regmap = devm_regmap_init_i2c(client, &tps62360_regmap_config);
@@ -449,24 +428,24 @@
int gpio_flags;
gpio_flags = (pdata->vsel0_def_state) ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
- ret = gpio_request_one(tps->vsel0_gpio,
+ ret = devm_gpio_request_one(&client->dev, tps->vsel0_gpio,
gpio_flags, "tps62360-vsel0");
if (ret) {
dev_err(&client->dev,
"%s(): Could not obtain vsel0 GPIO %d: %d\n",
__func__, tps->vsel0_gpio, ret);
- goto err_gpio0;
+ return ret;
}
gpio_flags = (pdata->vsel1_def_state) ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
- ret = gpio_request_one(tps->vsel1_gpio,
+ ret = devm_gpio_request_one(&client->dev, tps->vsel1_gpio,
gpio_flags, "tps62360-vsel1");
if (ret) {
dev_err(&client->dev,
"%s(): Could not obtain vsel1 GPIO %d: %d\n",
__func__, tps->vsel1_gpio, ret);
- goto err_gpio1;
+ return ret;
}
tps->valid_gpios = true;
@@ -484,7 +463,7 @@
if (ret < 0) {
dev_err(tps->dev, "%s(): Init failed with err = %d\n",
__func__, ret);
- goto err_init;
+ return ret;
}
config.dev = &client->dev;
@@ -498,21 +477,11 @@
dev_err(tps->dev,
"%s(): regulator register failed with err %s\n",
__func__, id->name);
- ret = PTR_ERR(rdev);
- goto err_init;
+ return PTR_ERR(rdev);
}
tps->rdev = rdev;
return 0;
-
-err_init:
- if (gpio_is_valid(tps->vsel1_gpio))
- gpio_free(tps->vsel1_gpio);
-err_gpio1:
- if (gpio_is_valid(tps->vsel0_gpio))
- gpio_free(tps->vsel0_gpio);
-err_gpio0:
- return ret;
}
/**
@@ -525,12 +494,6 @@
{
struct tps62360_chip *tps = i2c_get_clientdata(client);
- if (gpio_is_valid(tps->vsel1_gpio))
- gpio_free(tps->vsel1_gpio);
-
- if (gpio_is_valid(tps->vsel0_gpio))
- gpio_free(tps->vsel0_gpio);
-
regulator_unregister(tps->rdev);
return 0;
}
diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c
index f841bd0..6998d57 100644
--- a/drivers/regulator/tps65023-regulator.c
+++ b/drivers/regulator/tps65023-regulator.c
@@ -69,10 +69,6 @@
#define TPS65023_REG_CTRL2_DCDC1 BIT(1)
#define TPS65023_REG_CTRL2_DCDC3 BIT(0)
-/* LDO_CTRL bitfields */
-#define TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_id) ((ldo_id)*4)
-#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id) (0x0F << ((ldo_id)*4))
-
/* Number of step-down converters available */
#define TPS65023_NUM_DCDC 3
/* Number of LDO voltage regulators available */
@@ -91,48 +87,53 @@
#define TPS65023_MAX_REG_ID TPS65023_LDO_2
/* Supported voltage values for regulators */
-static const u16 VCORE_VSEL_table[] = {
- 800, 825, 850, 875,
- 900, 925, 950, 975,
- 1000, 1025, 1050, 1075,
- 1100, 1125, 1150, 1175,
- 1200, 1225, 1250, 1275,
- 1300, 1325, 1350, 1375,
- 1400, 1425, 1450, 1475,
- 1500, 1525, 1550, 1600,
+static const unsigned int VCORE_VSEL_table[] = {
+ 800000, 825000, 850000, 875000,
+ 900000, 925000, 950000, 975000,
+ 1000000, 1025000, 1050000, 1075000,
+ 1100000, 1125000, 1150000, 1175000,
+ 1200000, 1225000, 1250000, 1275000,
+ 1300000, 1325000, 1350000, 1375000,
+ 1400000, 1425000, 1450000, 1475000,
+ 1500000, 1525000, 1550000, 1600000,
+};
+
+static const unsigned int DCDC_FIXED_3300000_VSEL_table[] = {
+ 3300000,
+};
+
+static const unsigned int DCDC_FIXED_1800000_VSEL_table[] = {
+ 1800000,
};
/* Supported voltage values for LDO regulators for tps65020 */
-static const u16 TPS65020_LDO1_VSEL_table[] = {
- 1000, 1050, 1100, 1300,
- 1800, 2500, 3000, 3300,
+static const unsigned int TPS65020_LDO1_VSEL_table[] = {
+ 1000000, 1050000, 1100000, 1300000,
+ 1800000, 2500000, 3000000, 3300000,
};
-static const u16 TPS65020_LDO2_VSEL_table[] = {
- 1000, 1050, 1100, 1300,
- 1800, 2500, 3000, 3300,
+static const unsigned int TPS65020_LDO2_VSEL_table[] = {
+ 1000000, 1050000, 1100000, 1300000,
+ 1800000, 2500000, 3000000, 3300000,
};
/* Supported voltage values for LDO regulators
* for tps65021 and tps65023 */
-static const u16 TPS65023_LDO1_VSEL_table[] = {
- 1000, 1100, 1300, 1800,
- 2200, 2600, 2800, 3150,
+static const unsigned int TPS65023_LDO1_VSEL_table[] = {
+ 1000000, 1100000, 1300000, 1800000,
+ 2200000, 2600000, 2800000, 3150000,
};
-static const u16 TPS65023_LDO2_VSEL_table[] = {
- 1050, 1200, 1300, 1800,
- 2500, 2800, 3000, 3300,
+static const unsigned int TPS65023_LDO2_VSEL_table[] = {
+ 1050000, 1200000, 1300000, 1800000,
+ 2500000, 2800000, 3000000, 3300000,
};
/* Regulator specific details */
struct tps_info {
const char *name;
- unsigned min_uV;
- unsigned max_uV;
- bool fixed;
u8 table_len;
- const u16 *table;
+ const unsigned int *table;
};
/* PMIC details */
@@ -150,7 +151,7 @@
u8 core_regulator;
};
-static int tps65023_dcdc_get_voltage(struct regulator_dev *dev)
+static int tps65023_dcdc_get_voltage_sel(struct regulator_dev *dev)
{
struct tps_pmic *tps = rdev_get_drvdata(dev);
int ret;
@@ -164,9 +165,9 @@
if (ret != 0)
return ret;
data &= (tps->info[dcdc]->table_len - 1);
- return tps->info[dcdc]->table[data] * 1000;
+ return data;
} else
- return tps->info[dcdc]->min_uV;
+ return 0;
}
static int tps65023_dcdc_set_voltage_sel(struct regulator_dev *dev,
@@ -193,76 +194,14 @@
return ret;
}
-static int tps65023_ldo_get_voltage(struct regulator_dev *dev)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int data, ldo = rdev_get_id(dev);
- int ret;
-
- if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2)
- return -EINVAL;
-
- ret = regmap_read(tps->regmap, TPS65023_REG_LDO_CTRL, &data);
- if (ret != 0)
- return ret;
-
- data >>= (TPS65023_LDO_CTRL_LDOx_SHIFT(ldo - TPS65023_LDO_1));
- data &= (tps->info[ldo]->table_len - 1);
- return tps->info[ldo]->table[data] * 1000;
-}
-
-static int tps65023_ldo_set_voltage_sel(struct regulator_dev *dev,
- unsigned selector)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int ldo_index = rdev_get_id(dev) - TPS65023_LDO_1;
-
- return regmap_update_bits(tps->regmap, TPS65023_REG_LDO_CTRL,
- TPS65023_LDO_CTRL_LDOx_MASK(ldo_index),
- selector << TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_index));
-}
-
-static int tps65023_dcdc_list_voltage(struct regulator_dev *dev,
- unsigned selector)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int dcdc = rdev_get_id(dev);
-
- if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
- return -EINVAL;
-
- if (dcdc == tps->core_regulator) {
- if (selector >= tps->info[dcdc]->table_len)
- return -EINVAL;
- else
- return tps->info[dcdc]->table[selector] * 1000;
- } else
- return tps->info[dcdc]->min_uV;
-}
-
-static int tps65023_ldo_list_voltage(struct regulator_dev *dev,
- unsigned selector)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int ldo = rdev_get_id(dev);
-
- if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2)
- return -EINVAL;
-
- if (selector >= tps->info[ldo]->table_len)
- return -EINVAL;
- else
- return tps->info[ldo]->table[selector] * 1000;
-}
-
/* Operations permitted on VDCDCx */
static struct regulator_ops tps65023_dcdc_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
- .get_voltage = tps65023_dcdc_get_voltage,
+ .get_voltage_sel = tps65023_dcdc_get_voltage_sel,
.set_voltage_sel = tps65023_dcdc_set_voltage_sel,
- .list_voltage = tps65023_dcdc_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
};
/* Operations permitted on LDOx */
@@ -270,9 +209,9 @@
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
- .get_voltage = tps65023_ldo_get_voltage,
- .set_voltage_sel = tps65023_ldo_set_voltage_sel,
- .list_voltage = tps65023_ldo_list_voltage,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_table,
};
static struct regmap_config tps65023_regmap_config = {
@@ -325,19 +264,28 @@
tps->desc[i].name = info->name;
tps->desc[i].id = i;
tps->desc[i].n_voltages = info->table_len;
+ tps->desc[i].volt_table = info->table;
tps->desc[i].ops = (i > TPS65023_DCDC_3 ?
&tps65023_ldo_ops : &tps65023_dcdc_ops);
tps->desc[i].type = REGULATOR_VOLTAGE;
tps->desc[i].owner = THIS_MODULE;
tps->desc[i].enable_reg = TPS65023_REG_REG_CTRL;
- if (i == TPS65023_LDO_1)
+ switch (i) {
+ case TPS65023_LDO_1:
+ tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL;
+ tps->desc[i].vsel_mask = 0x07;
tps->desc[i].enable_mask = 1 << 1;
- else if (i == TPS65023_LDO_2)
+ break;
+ case TPS65023_LDO_2:
+ tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL;
+ tps->desc[i].vsel_mask = 0x70;
tps->desc[i].enable_mask = 1 << 2;
- else /* DCDCx */
+ break;
+ default: /* DCDCx */
tps->desc[i].enable_mask =
1 << (TPS65023_NUM_REGULATOR - i);
+ }
config.dev = &client->dev;
config.init_data = init_data;
@@ -384,35 +332,26 @@
static const struct tps_info tps65020_regs[] = {
{
.name = "VDCDC1",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .fixed = 1,
+ .table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table),
+ .table = DCDC_FIXED_3300000_VSEL_table,
},
{
.name = "VDCDC2",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .fixed = 1,
+ .table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table),
+ .table = DCDC_FIXED_1800000_VSEL_table,
},
{
.name = "VDCDC3",
- .min_uV = 800000,
- .max_uV = 1600000,
.table_len = ARRAY_SIZE(VCORE_VSEL_table),
.table = VCORE_VSEL_table,
},
-
{
.name = "LDO1",
- .min_uV = 1000000,
- .max_uV = 3150000,
.table_len = ARRAY_SIZE(TPS65020_LDO1_VSEL_table),
.table = TPS65020_LDO1_VSEL_table,
},
{
.name = "LDO2",
- .min_uV = 1050000,
- .max_uV = 3300000,
.table_len = ARRAY_SIZE(TPS65020_LDO2_VSEL_table),
.table = TPS65020_LDO2_VSEL_table,
},
@@ -421,34 +360,26 @@
static const struct tps_info tps65021_regs[] = {
{
.name = "VDCDC1",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .fixed = 1,
+ .table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table),
+ .table = DCDC_FIXED_3300000_VSEL_table,
},
{
.name = "VDCDC2",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .fixed = 1,
+ .table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table),
+ .table = DCDC_FIXED_1800000_VSEL_table,
},
{
.name = "VDCDC3",
- .min_uV = 800000,
- .max_uV = 1600000,
.table_len = ARRAY_SIZE(VCORE_VSEL_table),
.table = VCORE_VSEL_table,
},
{
.name = "LDO1",
- .min_uV = 1000000,
- .max_uV = 3150000,
.table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
.table = TPS65023_LDO1_VSEL_table,
},
{
.name = "LDO2",
- .min_uV = 1050000,
- .max_uV = 3300000,
.table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
.table = TPS65023_LDO2_VSEL_table,
},
@@ -457,34 +388,26 @@
static const struct tps_info tps65023_regs[] = {
{
.name = "VDCDC1",
- .min_uV = 800000,
- .max_uV = 1600000,
.table_len = ARRAY_SIZE(VCORE_VSEL_table),
.table = VCORE_VSEL_table,
},
{
.name = "VDCDC2",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .fixed = 1,
+ .table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table),
+ .table = DCDC_FIXED_3300000_VSEL_table,
},
{
.name = "VDCDC3",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .fixed = 1,
+ .table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table),
+ .table = DCDC_FIXED_1800000_VSEL_table,
},
{
.name = "LDO1",
- .min_uV = 1000000,
- .max_uV = 3150000,
.table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
.table = TPS65023_LDO1_VSEL_table,
},
{
.name = "LDO2",
- .min_uV = 1050000,
- .max_uV = 3300000,
.table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
.table = TPS65023_LDO2_VSEL_table,
},
diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c
index da38be1..07d01cc 100644
--- a/drivers/regulator/tps6507x-regulator.c
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -43,58 +43,40 @@
/* Number of total regulators available */
#define TPS6507X_NUM_REGULATOR (TPS6507X_NUM_DCDC + TPS6507X_NUM_LDO)
-/* Supported voltage values for regulators (in milliVolts) */
-static const u16 VDCDCx_VSEL_table[] = {
- 725, 750, 775, 800,
- 825, 850, 875, 900,
- 925, 950, 975, 1000,
- 1025, 1050, 1075, 1100,
- 1125, 1150, 1175, 1200,
- 1225, 1250, 1275, 1300,
- 1325, 1350, 1375, 1400,
- 1425, 1450, 1475, 1500,
- 1550, 1600, 1650, 1700,
- 1750, 1800, 1850, 1900,
- 1950, 2000, 2050, 2100,
- 2150, 2200, 2250, 2300,
- 2350, 2400, 2450, 2500,
- 2550, 2600, 2650, 2700,
- 2750, 2800, 2850, 2900,
- 3000, 3100, 3200, 3300,
+/* Supported voltage values for regulators (in microVolts) */
+static const unsigned int VDCDCx_VSEL_table[] = {
+ 725000, 750000, 775000, 800000,
+ 825000, 850000, 875000, 900000,
+ 925000, 950000, 975000, 1000000,
+ 1025000, 1050000, 1075000, 1100000,
+ 1125000, 1150000, 1175000, 1200000,
+ 1225000, 1250000, 1275000, 1300000,
+ 1325000, 1350000, 1375000, 1400000,
+ 1425000, 1450000, 1475000, 1500000,
+ 1550000, 1600000, 1650000, 1700000,
+ 1750000, 1800000, 1850000, 1900000,
+ 1950000, 2000000, 2050000, 2100000,
+ 2150000, 2200000, 2250000, 2300000,
+ 2350000, 2400000, 2450000, 2500000,
+ 2550000, 2600000, 2650000, 2700000,
+ 2750000, 2800000, 2850000, 2900000,
+ 3000000, 3100000, 3200000, 3300000,
};
-static const u16 LDO1_VSEL_table[] = {
- 1000, 1100, 1200, 1250,
- 1300, 1350, 1400, 1500,
- 1600, 1800, 2500, 2750,
- 2800, 3000, 3100, 3300,
+static const unsigned int LDO1_VSEL_table[] = {
+ 1000000, 1100000, 1200000, 1250000,
+ 1300000, 1350000, 1400000, 1500000,
+ 1600000, 1800000, 2500000, 2750000,
+ 2800000, 3000000, 3100000, 3300000,
};
-static const u16 LDO2_VSEL_table[] = {
- 725, 750, 775, 800,
- 825, 850, 875, 900,
- 925, 950, 975, 1000,
- 1025, 1050, 1075, 1100,
- 1125, 1150, 1175, 1200,
- 1225, 1250, 1275, 1300,
- 1325, 1350, 1375, 1400,
- 1425, 1450, 1475, 1500,
- 1550, 1600, 1650, 1700,
- 1750, 1800, 1850, 1900,
- 1950, 2000, 2050, 2100,
- 2150, 2200, 2250, 2300,
- 2350, 2400, 2450, 2500,
- 2550, 2600, 2650, 2700,
- 2750, 2800, 2850, 2900,
- 3000, 3100, 3200, 3300,
-};
+/* The voltage mapping table for LDO2 is the same as VDCDCx */
+#define LDO2_VSEL_table VDCDCx_VSEL_table
struct tps_info {
const char *name;
- unsigned min_uV;
- unsigned max_uV;
u8 table_len;
- const u16 *table;
+ const unsigned int *table;
/* Does DCDC high or the low register defines output voltage? */
bool defdcdc_default;
@@ -103,36 +85,26 @@
static struct tps_info tps6507x_pmic_regs[] = {
{
.name = "VDCDC1",
- .min_uV = 725000,
- .max_uV = 3300000,
.table_len = ARRAY_SIZE(VDCDCx_VSEL_table),
.table = VDCDCx_VSEL_table,
},
{
.name = "VDCDC2",
- .min_uV = 725000,
- .max_uV = 3300000,
.table_len = ARRAY_SIZE(VDCDCx_VSEL_table),
.table = VDCDCx_VSEL_table,
},
{
.name = "VDCDC3",
- .min_uV = 725000,
- .max_uV = 3300000,
.table_len = ARRAY_SIZE(VDCDCx_VSEL_table),
.table = VDCDCx_VSEL_table,
},
{
.name = "LDO1",
- .min_uV = 1000000,
- .max_uV = 3300000,
.table_len = ARRAY_SIZE(LDO1_VSEL_table),
.table = LDO1_VSEL_table,
},
{
.name = "LDO2",
- .min_uV = 725000,
- .max_uV = 3300000,
.table_len = ARRAY_SIZE(LDO2_VSEL_table),
.table = LDO2_VSEL_table,
},
@@ -375,28 +347,13 @@
return tps6507x_pmic_reg_write(tps, reg, data);
}
-static int tps6507x_pmic_list_voltage(struct regulator_dev *dev,
- unsigned selector)
-{
- struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
- int rid = rdev_get_id(dev);
-
- if (rid < TPS6507X_DCDC_1 || rid > TPS6507X_LDO_2)
- return -EINVAL;
-
- if (selector >= tps->info[rid]->table_len)
- return -EINVAL;
- else
- return tps->info[rid]->table[selector] * 1000;
-}
-
static struct regulator_ops tps6507x_pmic_ops = {
.is_enabled = tps6507x_pmic_is_enabled,
.enable = tps6507x_pmic_enable,
.disable = tps6507x_pmic_disable,
.get_voltage_sel = tps6507x_pmic_get_voltage_sel,
.set_voltage_sel = tps6507x_pmic_set_voltage_sel,
- .list_voltage = tps6507x_pmic_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
};
static __devinit int tps6507x_pmic_probe(struct platform_device *pdev)
@@ -449,6 +406,7 @@
tps->desc[i].name = info->name;
tps->desc[i].id = i;
tps->desc[i].n_voltages = info->table_len;
+ tps->desc[i].volt_table = info->table;
tps->desc[i].ops = &tps6507x_pmic_ops;
tps->desc[i].type = REGULATOR_VOLTAGE;
tps->desc[i].owner = THIS_MODULE;
diff --git a/drivers/regulator/tps65217-regulator.c b/drivers/regulator/tps65217-regulator.c
index 9d371d2..6caa222 100644
--- a/drivers/regulator/tps65217-regulator.c
+++ b/drivers/regulator/tps65217-regulator.c
@@ -26,7 +26,7 @@
#include <linux/regulator/machine.h>
#include <linux/mfd/tps65217.h>
-#define TPS65217_REGULATOR(_name, _id, _ops, _n) \
+#define TPS65217_REGULATOR(_name, _id, _ops, _n, _vr, _vm, _em, _t) \
{ \
.name = _name, \
.id = _id, \
@@ -34,23 +34,23 @@
.n_voltages = _n, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
+ .vsel_reg = _vr, \
+ .vsel_mask = _vm, \
+ .enable_reg = TPS65217_REG_ENABLE, \
+ .enable_mask = _em, \
+ .volt_table = _t, \
} \
-#define TPS65217_INFO(_nm, _min, _max, _f1, _f2, _t, _n, _em, _vr, _vm) \
+#define TPS65217_INFO(_nm, _min, _max, _f1, _f2) \
{ \
.name = _nm, \
.min_uV = _min, \
.max_uV = _max, \
.vsel_to_uv = _f1, \
.uv_to_vsel = _f2, \
- .table = _t, \
- .table_len = _n, \
- .enable_mask = _em, \
- .set_vout_reg = _vr, \
- .set_vout_mask = _vm, \
}
-static const int LDO1_VSEL_table[] = {
+static const unsigned int LDO1_VSEL_table[] = {
1000000, 1100000, 1200000, 1250000,
1300000, 1350000, 1400000, 1500000,
1600000, 1800000, 2500000, 2750000,
@@ -78,7 +78,7 @@
static int tps65217_uv_to_vsel1(int uV, unsigned int *vsel)
{
- if ((uV < 0) && (uV > 3300000))
+ if (uV < 0 || uV > 3300000)
return -EINVAL;
if (uV <= 1500000)
@@ -112,7 +112,7 @@
static int tps65217_uv_to_vsel2(int uV, unsigned int *vsel)
{
- if ((uV < 0) && (uV > 3300000))
+ if (uV < 0 || uV > 3300000)
return -EINVAL;
if (uV <= 1900000)
@@ -127,46 +127,20 @@
static struct tps_info tps65217_pmic_regs[] = {
TPS65217_INFO("DCDC1", 900000, 1800000, tps65217_vsel_to_uv1,
- tps65217_uv_to_vsel1, NULL, 64, TPS65217_ENABLE_DC1_EN,
- TPS65217_REG_DEFDCDC1, TPS65217_DEFDCDCX_DCDC_MASK),
+ tps65217_uv_to_vsel1),
TPS65217_INFO("DCDC2", 900000, 3300000, tps65217_vsel_to_uv1,
- tps65217_uv_to_vsel1, NULL, 64, TPS65217_ENABLE_DC2_EN,
- TPS65217_REG_DEFDCDC2, TPS65217_DEFDCDCX_DCDC_MASK),
+ tps65217_uv_to_vsel1),
TPS65217_INFO("DCDC3", 900000, 1500000, tps65217_vsel_to_uv1,
- tps65217_uv_to_vsel1, NULL, 64, TPS65217_ENABLE_DC3_EN,
- TPS65217_REG_DEFDCDC3, TPS65217_DEFDCDCX_DCDC_MASK),
- TPS65217_INFO("LDO1", 1000000, 3300000, NULL, NULL, LDO1_VSEL_table,
- 16, TPS65217_ENABLE_LDO1_EN, TPS65217_REG_DEFLDO1,
- TPS65217_DEFLDO1_LDO1_MASK),
+ tps65217_uv_to_vsel1),
+ TPS65217_INFO("LDO1", 1000000, 3300000, NULL, NULL),
TPS65217_INFO("LDO2", 900000, 3300000, tps65217_vsel_to_uv1,
- tps65217_uv_to_vsel1, NULL, 64, TPS65217_ENABLE_LDO2_EN,
- TPS65217_REG_DEFLDO2, TPS65217_DEFLDO2_LDO2_MASK),
+ tps65217_uv_to_vsel1),
TPS65217_INFO("LDO3", 1800000, 3300000, tps65217_vsel_to_uv2,
- tps65217_uv_to_vsel2, NULL, 32,
- TPS65217_ENABLE_LS1_EN | TPS65217_DEFLDO3_LDO3_EN,
- TPS65217_REG_DEFLS1, TPS65217_DEFLDO3_LDO3_MASK),
+ tps65217_uv_to_vsel2),
TPS65217_INFO("LDO4", 1800000, 3300000, tps65217_vsel_to_uv2,
- tps65217_uv_to_vsel2, NULL, 32,
- TPS65217_ENABLE_LS2_EN | TPS65217_DEFLDO4_LDO4_EN,
- TPS65217_REG_DEFLS2, TPS65217_DEFLDO4_LDO4_MASK),
+ tps65217_uv_to_vsel2),
};
-static int tps65217_pmic_is_enabled(struct regulator_dev *dev)
-{
- int ret;
- struct tps65217 *tps = rdev_get_drvdata(dev);
- unsigned int data, rid = rdev_get_id(dev);
-
- if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4)
- return -EINVAL;
-
- ret = tps65217_reg_read(tps, TPS65217_REG_ENABLE, &data);
- if (ret)
- return ret;
-
- return (data & tps->info[rid]->enable_mask) ? 1 : 0;
-}
-
static int tps65217_pmic_enable(struct regulator_dev *dev)
{
struct tps65217 *tps = rdev_get_drvdata(dev);
@@ -177,9 +151,8 @@
/* Enable the regulator and password protection is level 1 */
return tps65217_set_bits(tps, TPS65217_REG_ENABLE,
- tps->info[rid]->enable_mask,
- tps->info[rid]->enable_mask,
- TPS65217_PROTECT_L1);
+ dev->desc->enable_mask, dev->desc->enable_mask,
+ TPS65217_PROTECT_L1);
}
static int tps65217_pmic_disable(struct regulator_dev *dev)
@@ -192,25 +165,7 @@
/* Disable the regulator and password protection is level 1 */
return tps65217_clear_bits(tps, TPS65217_REG_ENABLE,
- tps->info[rid]->enable_mask, TPS65217_PROTECT_L1);
-}
-
-static int tps65217_pmic_get_voltage_sel(struct regulator_dev *dev)
-{
- int ret;
- struct tps65217 *tps = rdev_get_drvdata(dev);
- unsigned int selector, rid = rdev_get_id(dev);
-
- if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4)
- return -EINVAL;
-
- ret = tps65217_reg_read(tps, tps->info[rid]->set_vout_reg, &selector);
- if (ret)
- return ret;
-
- selector &= tps->info[rid]->set_vout_mask;
-
- return selector;
+ dev->desc->enable_mask, TPS65217_PROTECT_L1);
}
static int tps65217_pmic_set_voltage_sel(struct regulator_dev *dev,
@@ -221,8 +176,7 @@
unsigned int rid = rdev_get_id(dev);
/* Set the voltage based on vsel value and write protect level is 2 */
- ret = tps65217_set_bits(tps, tps->info[rid]->set_vout_reg,
- tps->info[rid]->set_vout_mask,
+ ret = tps65217_set_bits(tps, dev->desc->vsel_reg, dev->desc->vsel_mask,
selector, TPS65217_PROTECT_L2);
/* Set GO bit for DCDCx to initiate voltage transistion */
@@ -252,10 +206,10 @@
if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4)
return -EINVAL;
- if (min_uV < tps->info[rid]->min_uV || min_uV > tps->info[rid]->max_uV)
- return -EINVAL;
+ if (min_uV < tps->info[rid]->min_uV)
+ min_uV = tps->info[rid]->min_uV;
- if (max_uV < tps->info[rid]->min_uV || max_uV > tps->info[rid]->max_uV)
+ if (max_uV < tps->info[rid]->min_uV || min_uV > tps->info[rid]->max_uV)
return -EINVAL;
ret = tps->info[rid]->uv_to_vsel(min_uV, &sel);
@@ -274,21 +228,18 @@
if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4)
return -EINVAL;
- if (selector >= tps->info[rid]->table_len)
+ if (selector >= dev->desc->n_voltages)
return -EINVAL;
- if (tps->info[rid]->table)
- return tps->info[rid]->table[selector];
-
return tps->info[rid]->vsel_to_uv(selector);
}
/* Operations permitted on DCDCx, LDO2, LDO3 and LDO4 */
static struct regulator_ops tps65217_pmic_ops = {
- .is_enabled = tps65217_pmic_is_enabled,
+ .is_enabled = regulator_is_enabled_regmap,
.enable = tps65217_pmic_enable,
.disable = tps65217_pmic_disable,
- .get_voltage_sel = tps65217_pmic_get_voltage_sel,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = tps65217_pmic_set_voltage_sel,
.list_voltage = tps65217_pmic_list_voltage,
.map_voltage = tps65217_pmic_map_voltage,
@@ -296,22 +247,38 @@
/* Operations permitted on LDO1 */
static struct regulator_ops tps65217_pmic_ldo1_ops = {
- .is_enabled = tps65217_pmic_is_enabled,
+ .is_enabled = regulator_is_enabled_regmap,
.enable = tps65217_pmic_enable,
.disable = tps65217_pmic_disable,
- .get_voltage_sel = tps65217_pmic_get_voltage_sel,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = tps65217_pmic_set_voltage_sel,
- .list_voltage = tps65217_pmic_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
};
static const struct regulator_desc regulators[] = {
- TPS65217_REGULATOR("DCDC1", TPS65217_DCDC_1, tps65217_pmic_ops, 64),
- TPS65217_REGULATOR("DCDC2", TPS65217_DCDC_2, tps65217_pmic_ops, 64),
- TPS65217_REGULATOR("DCDC3", TPS65217_DCDC_3, tps65217_pmic_ops, 64),
- TPS65217_REGULATOR("LDO1", TPS65217_LDO_1, tps65217_pmic_ldo1_ops, 16),
- TPS65217_REGULATOR("LDO2", TPS65217_LDO_2, tps65217_pmic_ops, 64),
- TPS65217_REGULATOR("LDO3", TPS65217_LDO_3, tps65217_pmic_ops, 32),
- TPS65217_REGULATOR("LDO4", TPS65217_LDO_4, tps65217_pmic_ops, 32),
+ TPS65217_REGULATOR("DCDC1", TPS65217_DCDC_1, tps65217_pmic_ops, 64,
+ TPS65217_REG_DEFDCDC1, TPS65217_DEFDCDCX_DCDC_MASK,
+ TPS65217_ENABLE_DC1_EN, NULL),
+ TPS65217_REGULATOR("DCDC2", TPS65217_DCDC_2, tps65217_pmic_ops, 64,
+ TPS65217_REG_DEFDCDC2, TPS65217_DEFDCDCX_DCDC_MASK,
+ TPS65217_ENABLE_DC2_EN, NULL),
+ TPS65217_REGULATOR("DCDC3", TPS65217_DCDC_3, tps65217_pmic_ops, 64,
+ TPS65217_REG_DEFDCDC3, TPS65217_DEFDCDCX_DCDC_MASK,
+ TPS65217_ENABLE_DC3_EN, NULL),
+ TPS65217_REGULATOR("LDO1", TPS65217_LDO_1, tps65217_pmic_ldo1_ops, 16,
+ TPS65217_REG_DEFLDO1, TPS65217_DEFLDO1_LDO1_MASK,
+ TPS65217_ENABLE_LDO1_EN, LDO1_VSEL_table),
+ TPS65217_REGULATOR("LDO2", TPS65217_LDO_2, tps65217_pmic_ops, 64,
+ TPS65217_REG_DEFLDO2, TPS65217_DEFLDO2_LDO2_MASK,
+ TPS65217_ENABLE_LDO2_EN, NULL),
+ TPS65217_REGULATOR("LDO3", TPS65217_LDO_3, tps65217_pmic_ops, 32,
+ TPS65217_REG_DEFLS1, TPS65217_DEFLDO3_LDO3_MASK,
+ TPS65217_ENABLE_LS1_EN | TPS65217_DEFLDO3_LDO3_EN,
+ NULL),
+ TPS65217_REGULATOR("LDO4", TPS65217_LDO_4, tps65217_pmic_ops, 32,
+ TPS65217_REG_DEFLS2, TPS65217_DEFLDO4_LDO4_MASK,
+ TPS65217_ENABLE_LS2_EN | TPS65217_DEFLDO4_LDO4_EN,
+ NULL),
};
static int __devinit tps65217_regulator_probe(struct platform_device *pdev)
@@ -326,6 +293,7 @@
tps->info[pdev->id] = info;
config.dev = &pdev->dev;
+ config.of_node = pdev->dev.of_node;
config.init_data = pdev->dev.platform_data;
config.driver_data = tps;
diff --git a/drivers/regulator/tps6524x-regulator.c b/drivers/regulator/tps6524x-regulator.c
index b88b3df..947ece9 100644
--- a/drivers/regulator/tps6524x-regulator.c
+++ b/drivers/regulator/tps6524x-regulator.c
@@ -110,9 +110,6 @@
#define N_SWITCH 2
#define N_REGULATORS (N_DCDC + N_LDO + N_SWITCH)
-#define FIXED_ILIMSEL BIT(0)
-#define FIXED_VOLTAGE BIT(1)
-
#define CMD_READ(reg) ((reg) << 6)
#define CMD_WRITE(reg) (BIT(5) | (reg) << 6)
#define STAT_CLK BIT(3)
@@ -129,12 +126,9 @@
struct supply_info {
const char *name;
int n_voltages;
- const int *voltages;
- int fixed_voltage;
+ const unsigned int *voltages;
int n_ilimsels;
- const int *ilimsels;
- int fixed_ilimsel;
- int flags;
+ const unsigned int *ilimsels;
struct field enable, voltage, ilimsel;
};
@@ -307,7 +301,7 @@
val << field->shift);
}
-static const int dcdc1_voltages[] = {
+static const unsigned int dcdc1_voltages[] = {
800000, 825000, 850000, 875000,
900000, 925000, 950000, 975000,
1000000, 1025000, 1050000, 1075000,
@@ -318,7 +312,7 @@
1500000, 1525000, 1550000, 1575000,
};
-static const int dcdc2_voltages[] = {
+static const unsigned int dcdc2_voltages[] = {
1400000, 1450000, 1500000, 1550000,
1600000, 1650000, 1700000, 1750000,
1800000, 1850000, 1900000, 1950000,
@@ -329,7 +323,7 @@
2800000, 2850000, 2900000, 2950000,
};
-static const int dcdc3_voltages[] = {
+static const unsigned int dcdc3_voltages[] = {
2400000, 2450000, 2500000, 2550000, 2600000,
2650000, 2700000, 2750000, 2800000, 2850000,
2900000, 2950000, 3000000, 3050000, 3100000,
@@ -337,38 +331,54 @@
3400000, 3450000, 3500000, 3550000, 3600000,
};
-static const int ldo1_voltages[] = {
+static const unsigned int ldo1_voltages[] = {
4300000, 4350000, 4400000, 4450000,
4500000, 4550000, 4600000, 4650000,
4700000, 4750000, 4800000, 4850000,
4900000, 4950000, 5000000, 5050000,
};
-static const int ldo2_voltages[] = {
+static const unsigned int ldo2_voltages[] = {
1100000, 1150000, 1200000, 1250000,
1300000, 1700000, 1750000, 1800000,
1850000, 1900000, 3150000, 3200000,
3250000, 3300000, 3350000, 3400000,
};
-static const int ldo_ilimsel[] = {
+static const unsigned int fixed_5000000_voltage[] = {
+ 5000000
+};
+
+static const unsigned int ldo_ilimsel[] = {
400000, 1500000
};
-static const int usb_ilimsel[] = {
+static const unsigned int usb_ilimsel[] = {
200000, 400000, 800000, 1000000
};
+static const unsigned int fixed_2400000_ilimsel[] = {
+ 2400000
+};
+
+static const unsigned int fixed_1200000_ilimsel[] = {
+ 1200000
+};
+
+static const unsigned int fixed_400000_ilimsel[] = {
+ 400000
+};
+
#define __MK_FIELD(_reg, _mask, _shift) \
{ .reg = (_reg), .mask = (_mask), .shift = (_shift), }
static const struct supply_info supply_info[N_REGULATORS] = {
{
.name = "DCDC1",
- .flags = FIXED_ILIMSEL,
.n_voltages = ARRAY_SIZE(dcdc1_voltages),
.voltages = dcdc1_voltages,
- .fixed_ilimsel = 2400000,
+ .n_ilimsels = ARRAY_SIZE(fixed_2400000_ilimsel),
+ .ilimsels = fixed_2400000_ilimsel,
.enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
DCDCDCDC1_EN_SHIFT),
.voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
@@ -376,10 +386,10 @@
},
{
.name = "DCDC2",
- .flags = FIXED_ILIMSEL,
.n_voltages = ARRAY_SIZE(dcdc2_voltages),
.voltages = dcdc2_voltages,
- .fixed_ilimsel = 1200000,
+ .n_ilimsels = ARRAY_SIZE(fixed_1200000_ilimsel),
+ .ilimsels = fixed_1200000_ilimsel,
.enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
DCDCDCDC2_EN_SHIFT),
.voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
@@ -387,10 +397,10 @@
},
{
.name = "DCDC3",
- .flags = FIXED_ILIMSEL,
.n_voltages = ARRAY_SIZE(dcdc3_voltages),
.voltages = dcdc3_voltages,
- .fixed_ilimsel = 1200000,
+ .n_ilimsels = ARRAY_SIZE(fixed_1200000_ilimsel),
+ .ilimsels = fixed_1200000_ilimsel,
.enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
DCDCDCDC3_EN_SHIFT),
.voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
@@ -424,8 +434,8 @@
},
{
.name = "USB",
- .flags = FIXED_VOLTAGE,
- .fixed_voltage = 5000000,
+ .n_voltages = ARRAY_SIZE(fixed_5000000_voltage),
+ .voltages = fixed_5000000_voltage,
.n_ilimsels = ARRAY_SIZE(usb_ilimsel),
.ilimsels = usb_ilimsel,
.enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
@@ -435,29 +445,15 @@
},
{
.name = "LCD",
- .flags = FIXED_VOLTAGE | FIXED_ILIMSEL,
- .fixed_voltage = 5000000,
- .fixed_ilimsel = 400000,
+ .n_voltages = ARRAY_SIZE(fixed_5000000_voltage),
+ .voltages = fixed_5000000_voltage,
+ .n_ilimsels = ARRAY_SIZE(fixed_400000_ilimsel),
+ .ilimsels = fixed_400000_ilimsel,
.enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
BLOCK_LCD_SHIFT),
},
};
-static int list_voltage(struct regulator_dev *rdev, unsigned selector)
-{
- const struct supply_info *info;
- struct tps6524x *hw;
-
- hw = rdev_get_drvdata(rdev);
- info = &supply_info[rdev_get_id(rdev)];
-
- if (info->flags & FIXED_VOLTAGE)
- return selector ? -EINVAL : info->fixed_voltage;
-
- return ((selector < info->n_voltages) ?
- info->voltages[selector] : -EINVAL);
-}
-
static int set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
{
const struct supply_info *info;
@@ -466,7 +462,7 @@
hw = rdev_get_drvdata(rdev);
info = &supply_info[rdev_get_id(rdev)];
- if (info->flags & FIXED_VOLTAGE)
+ if (rdev->desc->n_voltages == 1)
return -EINVAL;
return write_field(hw, &info->voltage, selector);
@@ -481,8 +477,8 @@
hw = rdev_get_drvdata(rdev);
info = &supply_info[rdev_get_id(rdev)];
- if (info->flags & FIXED_VOLTAGE)
- return info->fixed_voltage;
+ if (rdev->desc->n_voltages == 1)
+ return 0;
ret = read_field(hw, &info->voltage);
if (ret < 0)
@@ -503,7 +499,7 @@
hw = rdev_get_drvdata(rdev);
info = &supply_info[rdev_get_id(rdev)];
- if (info->flags & FIXED_ILIMSEL)
+ if (info->n_ilimsels == 1)
return -EINVAL;
for (i = 0; i < info->n_ilimsels; i++)
@@ -526,8 +522,8 @@
hw = rdev_get_drvdata(rdev);
info = &supply_info[rdev_get_id(rdev)];
- if (info->flags & FIXED_ILIMSEL)
- return info->fixed_ilimsel;
+ if (info->n_ilimsels == 1)
+ return info->ilimsels[0];
ret = read_field(hw, &info->ilimsel);
if (ret < 0)
@@ -577,7 +573,7 @@
.disable = disable_supply,
.get_voltage_sel = get_voltage_sel,
.set_voltage_sel = set_voltage_sel,
- .list_voltage = list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.set_current_limit = set_current_limit,
.get_current_limit = get_current_limit,
};
@@ -629,13 +625,11 @@
hw->desc[i].name = info->name;
hw->desc[i].id = i;
hw->desc[i].n_voltages = info->n_voltages;
+ hw->desc[i].volt_table = info->voltages;
hw->desc[i].ops = ®ulator_ops;
hw->desc[i].type = REGULATOR_VOLTAGE;
hw->desc[i].owner = THIS_MODULE;
- if (info->flags & FIXED_VOLTAGE)
- hw->desc[i].n_voltages = 1;
-
config.dev = dev;
config.init_data = init_data;
config.driver_data = hw;
diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index c0a2145..e6da90a 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -63,8 +63,6 @@
int enable_bit[2];
int enable_reg[2];
- int *voltages;
-
/* for DVM regulators */
int go_reg;
int go_bit;
@@ -72,22 +70,9 @@
static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev)
{
- return rdev_get_dev(rdev)->parent->parent;
+ return rdev_get_dev(rdev)->parent;
}
-static int tps6586x_list_voltage(struct regulator_dev *rdev, unsigned selector)
-{
- struct tps6586x_regulator *info = rdev_get_drvdata(rdev);
- int rid = rdev_get_id(rdev);
-
- /* LDO0 has minimal voltage 1.2V rather than 1.25V */
- if ((rid == TPS6586X_ID_LDO_0) && (selector == 0))
- return (info->voltages[0] - 50) * 1000;
-
- return info->voltages[selector] * 1000;
-}
-
-
static int tps6586x_set_voltage_sel(struct regulator_dev *rdev,
unsigned selector)
{
@@ -168,7 +153,7 @@
}
static struct regulator_ops tps6586x_regulator_ops = {
- .list_voltage = tps6586x_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.get_voltage_sel = tps6586x_get_voltage_sel,
.set_voltage_sel = tps6586x_set_voltage_sel,
@@ -177,39 +162,45 @@
.disable = tps6586x_regulator_disable,
};
-static int tps6586x_ldo_voltages[] = {
- 1250, 1500, 1800, 2500, 2700, 2850, 3100, 3300,
+static const unsigned int tps6586x_ldo0_voltages[] = {
+ 1200000, 1500000, 1800000, 2500000, 2700000, 2850000, 3100000, 3300000,
};
-static int tps6586x_ldo4_voltages[] = {
- 1700, 1725, 1750, 1775, 1800, 1825, 1850, 1875,
- 1900, 1925, 1950, 1975, 2000, 2025, 2050, 2075,
- 2100, 2125, 2150, 2175, 2200, 2225, 2250, 2275,
- 2300, 2325, 2350, 2375, 2400, 2425, 2450, 2475,
+static const unsigned int tps6586x_ldo4_voltages[] = {
+ 1700000, 1725000, 1750000, 1775000, 1800000, 1825000, 1850000, 1875000,
+ 1900000, 1925000, 1950000, 1975000, 2000000, 2025000, 2050000, 2075000,
+ 2100000, 2125000, 2150000, 2175000, 2200000, 2225000, 2250000, 2275000,
+ 2300000, 2325000, 2350000, 2375000, 2400000, 2425000, 2450000, 2475000,
};
-static int tps6586x_sm2_voltages[] = {
- 3000, 3050, 3100, 3150, 3200, 3250, 3300, 3350,
- 3400, 3450, 3500, 3550, 3600, 3650, 3700, 3750,
- 3800, 3850, 3900, 3950, 4000, 4050, 4100, 4150,
- 4200, 4250, 4300, 4350, 4400, 4450, 4500, 4550,
+static const unsigned int tps6586x_ldo_voltages[] = {
+ 1250000, 1500000, 1800000, 2500000, 2700000, 2850000, 3100000, 3300000,
};
-static int tps6586x_dvm_voltages[] = {
- 725, 750, 775, 800, 825, 850, 875, 900,
- 925, 950, 975, 1000, 1025, 1050, 1075, 1100,
- 1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300,
- 1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500,
+static const unsigned int tps6586x_sm2_voltages[] = {
+ 3000000, 3050000, 3100000, 3150000, 3200000, 3250000, 3300000, 3350000,
+ 3400000, 3450000, 3500000, 3550000, 3600000, 3650000, 3700000, 3750000,
+ 3800000, 3850000, 3900000, 3950000, 4000000, 4050000, 4100000, 4150000,
+ 4200000, 4250000, 4300000, 4350000, 4400000, 4450000, 4500000, 4550000,
};
-#define TPS6586X_REGULATOR(_id, vdata, vreg, shift, nbits, \
+static const unsigned int tps6586x_dvm_voltages[] = {
+ 725000, 750000, 775000, 800000, 825000, 850000, 875000, 900000,
+ 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000,
+ 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000,
+ 1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000,
+};
+
+#define TPS6586X_REGULATOR(_id, _pin_name, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1) \
.desc = { \
+ .supply_name = _pin_name, \
.name = "REG-" #_id, \
.ops = &tps6586x_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.id = TPS6586X_ID_##_id, \
.n_voltages = ARRAY_SIZE(tps6586x_##vdata##_voltages), \
+ .volt_table = tps6586x_##vdata##_voltages, \
.owner = THIS_MODULE, \
}, \
.volt_reg = TPS6586X_##vreg, \
@@ -218,44 +209,45 @@
.enable_reg[0] = TPS6586X_SUPPLY##ereg0, \
.enable_bit[0] = (ebit0), \
.enable_reg[1] = TPS6586X_SUPPLY##ereg1, \
- .enable_bit[1] = (ebit1), \
- .voltages = tps6586x_##vdata##_voltages,
+ .enable_bit[1] = (ebit1),
#define TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \
.go_reg = TPS6586X_##goreg, \
.go_bit = (gobit),
-#define TPS6586X_LDO(_id, vdata, vreg, shift, nbits, \
+#define TPS6586X_LDO(_id, _pname, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1) \
{ \
- TPS6586X_REGULATOR(_id, vdata, vreg, shift, nbits, \
+ TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1) \
}
-#define TPS6586X_DVM(_id, vdata, vreg, shift, nbits, \
+#define TPS6586X_DVM(_id, _pname, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
{ \
- TPS6586X_REGULATOR(_id, vdata, vreg, shift, nbits, \
+ TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1) \
TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \
}
static struct tps6586x_regulator tps6586x_regulator[] = {
- TPS6586X_LDO(LDO_0, ldo, SUPPLYV1, 5, 3, ENC, 0, END, 0),
- TPS6586X_LDO(LDO_3, ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2),
- TPS6586X_LDO(LDO_5, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
- TPS6586X_LDO(LDO_6, ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4),
- TPS6586X_LDO(LDO_7, ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5),
- TPS6586X_LDO(LDO_8, ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6),
- TPS6586X_LDO(LDO_9, ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7),
- TPS6586X_LDO(LDO_RTC, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7),
- TPS6586X_LDO(LDO_1, dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1),
- TPS6586X_LDO(SM_2, sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7),
+ TPS6586X_LDO(LDO_0, "vinldo01", ldo0, SUPPLYV1, 5, 3, ENC, 0, END, 0),
+ TPS6586X_LDO(LDO_3, "vinldo23", ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2),
+ TPS6586X_LDO(LDO_5, NULL, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
+ TPS6586X_LDO(LDO_6, "vinldo678", ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4),
+ TPS6586X_LDO(LDO_7, "vinldo678", ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5),
+ TPS6586X_LDO(LDO_8, "vinldo678", ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6),
+ TPS6586X_LDO(LDO_9, "vinldo9", ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7),
+ TPS6586X_LDO(LDO_RTC, NULL, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7),
+ TPS6586X_LDO(LDO_1, "vinldo01", dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1),
+ TPS6586X_LDO(SM_2, "sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7),
- TPS6586X_DVM(LDO_2, dvm, LDO2BV1, 0, 5, ENA, 3, ENB, 3, VCC2, 6),
- TPS6586X_DVM(LDO_4, ldo4, LDO4V1, 0, 5, ENC, 3, END, 3, VCC1, 6),
- TPS6586X_DVM(SM_0, dvm, SM0V1, 0, 5, ENA, 1, ENB, 1, VCC1, 2),
- TPS6586X_DVM(SM_1, dvm, SM1V1, 0, 5, ENA, 0, ENB, 0, VCC1, 0),
+ TPS6586X_DVM(LDO_2, "vinldo23", dvm, LDO2BV1, 0, 5, ENA, 3,
+ ENB, 3, VCC2, 6),
+ TPS6586X_DVM(LDO_4, "vinldo4", ldo4, LDO4V1, 0, 5, ENC, 3,
+ END, 3, VCC1, 6),
+ TPS6586X_DVM(SM_0, "sm0", dvm, SM0V1, 0, 5, ENA, 1, ENB, 1, VCC1, 2),
+ TPS6586X_DVM(SM_1, "sm1", dvm, SM1V1, 0, 5, ENA, 0, ENB, 0, VCC1, 0),
};
/*
@@ -362,7 +354,7 @@
if (err)
return err;
- config.dev = &pdev->dev;
+ config.dev = pdev->dev.parent;
config.of_node = pdev->dev.of_node;
config.init_data = pdev->dev.platform_data;
config.driver_data = ri;
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index 6bf864b..793adda 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -31,160 +31,147 @@
TPS65910_SLEEP_CONTROL_EXT_INPUT_EN3 | \
TPS65911_SLEEP_CONTROL_EXT_INPUT_SLEEP)
-/* supported VIO voltages in millivolts */
-static const u16 VIO_VSEL_table[] = {
- 1500, 1800, 2500, 3300,
+/* supported VIO voltages in microvolts */
+static const unsigned int VIO_VSEL_table[] = {
+ 1500000, 1800000, 2500000, 3300000,
};
/* VSEL tables for TPS65910 specific LDOs and dcdc's */
-/* supported VDD3 voltages in millivolts */
-static const u16 VDD3_VSEL_table[] = {
- 5000,
+/* supported VDD3 voltages in microvolts */
+static const unsigned int VDD3_VSEL_table[] = {
+ 5000000,
};
-/* supported VDIG1 voltages in millivolts */
-static const u16 VDIG1_VSEL_table[] = {
- 1200, 1500, 1800, 2700,
+/* supported VDIG1 voltages in microvolts */
+static const unsigned int VDIG1_VSEL_table[] = {
+ 1200000, 1500000, 1800000, 2700000,
};
-/* supported VDIG2 voltages in millivolts */
-static const u16 VDIG2_VSEL_table[] = {
- 1000, 1100, 1200, 1800,
+/* supported VDIG2 voltages in microvolts */
+static const unsigned int VDIG2_VSEL_table[] = {
+ 1000000, 1100000, 1200000, 1800000,
};
-/* supported VPLL voltages in millivolts */
-static const u16 VPLL_VSEL_table[] = {
- 1000, 1100, 1800, 2500,
+/* supported VPLL voltages in microvolts */
+static const unsigned int VPLL_VSEL_table[] = {
+ 1000000, 1100000, 1800000, 2500000,
};
-/* supported VDAC voltages in millivolts */
-static const u16 VDAC_VSEL_table[] = {
- 1800, 2600, 2800, 2850,
+/* supported VDAC voltages in microvolts */
+static const unsigned int VDAC_VSEL_table[] = {
+ 1800000, 2600000, 2800000, 2850000,
};
-/* supported VAUX1 voltages in millivolts */
-static const u16 VAUX1_VSEL_table[] = {
- 1800, 2500, 2800, 2850,
+/* supported VAUX1 voltages in microvolts */
+static const unsigned int VAUX1_VSEL_table[] = {
+ 1800000, 2500000, 2800000, 2850000,
};
-/* supported VAUX2 voltages in millivolts */
-static const u16 VAUX2_VSEL_table[] = {
- 1800, 2800, 2900, 3300,
+/* supported VAUX2 voltages in microvolts */
+static const unsigned int VAUX2_VSEL_table[] = {
+ 1800000, 2800000, 2900000, 3300000,
};
-/* supported VAUX33 voltages in millivolts */
-static const u16 VAUX33_VSEL_table[] = {
- 1800, 2000, 2800, 3300,
+/* supported VAUX33 voltages in microvolts */
+static const unsigned int VAUX33_VSEL_table[] = {
+ 1800000, 2000000, 2800000, 3300000,
};
-/* supported VMMC voltages in millivolts */
-static const u16 VMMC_VSEL_table[] = {
- 1800, 2800, 3000, 3300,
+/* supported VMMC voltages in microvolts */
+static const unsigned int VMMC_VSEL_table[] = {
+ 1800000, 2800000, 3000000, 3300000,
};
struct tps_info {
const char *name;
- unsigned min_uV;
- unsigned max_uV;
+ const char *vin_name;
u8 n_voltages;
- const u16 *voltage_table;
+ const unsigned int *voltage_table;
int enable_time_us;
};
static struct tps_info tps65910_regs[] = {
{
.name = "vrtc",
+ .vin_name = "vcc7",
.enable_time_us = 2200,
},
{
.name = "vio",
- .min_uV = 1500000,
- .max_uV = 3300000,
+ .vin_name = "vccio",
.n_voltages = ARRAY_SIZE(VIO_VSEL_table),
.voltage_table = VIO_VSEL_table,
.enable_time_us = 350,
},
{
.name = "vdd1",
- .min_uV = 600000,
- .max_uV = 4500000,
+ .vin_name = "vcc1",
.enable_time_us = 350,
},
{
.name = "vdd2",
- .min_uV = 600000,
- .max_uV = 4500000,
+ .vin_name = "vcc2",
.enable_time_us = 350,
},
{
.name = "vdd3",
- .min_uV = 5000000,
- .max_uV = 5000000,
.n_voltages = ARRAY_SIZE(VDD3_VSEL_table),
.voltage_table = VDD3_VSEL_table,
.enable_time_us = 200,
},
{
.name = "vdig1",
- .min_uV = 1200000,
- .max_uV = 2700000,
+ .vin_name = "vcc6",
.n_voltages = ARRAY_SIZE(VDIG1_VSEL_table),
.voltage_table = VDIG1_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vdig2",
- .min_uV = 1000000,
- .max_uV = 1800000,
+ .vin_name = "vcc6",
.n_voltages = ARRAY_SIZE(VDIG2_VSEL_table),
.voltage_table = VDIG2_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vpll",
- .min_uV = 1000000,
- .max_uV = 2500000,
+ .vin_name = "vcc5",
.n_voltages = ARRAY_SIZE(VPLL_VSEL_table),
.voltage_table = VPLL_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vdac",
- .min_uV = 1800000,
- .max_uV = 2850000,
+ .vin_name = "vcc5",
.n_voltages = ARRAY_SIZE(VDAC_VSEL_table),
.voltage_table = VDAC_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vaux1",
- .min_uV = 1800000,
- .max_uV = 2850000,
+ .vin_name = "vcc4",
.n_voltages = ARRAY_SIZE(VAUX1_VSEL_table),
.voltage_table = VAUX1_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vaux2",
- .min_uV = 1800000,
- .max_uV = 3300000,
+ .vin_name = "vcc4",
.n_voltages = ARRAY_SIZE(VAUX2_VSEL_table),
.voltage_table = VAUX2_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vaux33",
- .min_uV = 1800000,
- .max_uV = 3300000,
+ .vin_name = "vcc3",
.n_voltages = ARRAY_SIZE(VAUX33_VSEL_table),
.voltage_table = VAUX33_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vmmc",
- .min_uV = 1800000,
- .max_uV = 3300000,
+ .vin_name = "vcc3",
.n_voltages = ARRAY_SIZE(VMMC_VSEL_table),
.voltage_table = VMMC_VSEL_table,
.enable_time_us = 100,
@@ -194,91 +181,79 @@
static struct tps_info tps65911_regs[] = {
{
.name = "vrtc",
+ .vin_name = "vcc7",
.enable_time_us = 2200,
},
{
.name = "vio",
- .min_uV = 1500000,
- .max_uV = 3300000,
+ .vin_name = "vccio",
.n_voltages = ARRAY_SIZE(VIO_VSEL_table),
.voltage_table = VIO_VSEL_table,
.enable_time_us = 350,
},
{
.name = "vdd1",
- .min_uV = 600000,
- .max_uV = 4500000,
- .n_voltages = 73,
+ .vin_name = "vcc1",
+ .n_voltages = 0x4C,
.enable_time_us = 350,
},
{
.name = "vdd2",
- .min_uV = 600000,
- .max_uV = 4500000,
- .n_voltages = 73,
+ .vin_name = "vcc2",
+ .n_voltages = 0x4C,
.enable_time_us = 350,
},
{
.name = "vddctrl",
- .min_uV = 600000,
- .max_uV = 1400000,
- .n_voltages = 65,
+ .n_voltages = 0x44,
.enable_time_us = 900,
},
{
.name = "ldo1",
- .min_uV = 1000000,
- .max_uV = 3300000,
- .n_voltages = 47,
+ .vin_name = "vcc6",
+ .n_voltages = 0x33,
.enable_time_us = 420,
},
{
.name = "ldo2",
- .min_uV = 1000000,
- .max_uV = 3300000,
- .n_voltages = 47,
+ .vin_name = "vcc6",
+ .n_voltages = 0x33,
.enable_time_us = 420,
},
{
.name = "ldo3",
- .min_uV = 1000000,
- .max_uV = 3300000,
- .n_voltages = 24,
+ .vin_name = "vcc5",
+ .n_voltages = 0x1A,
.enable_time_us = 230,
},
{
.name = "ldo4",
- .min_uV = 1000000,
- .max_uV = 3300000,
- .n_voltages = 47,
+ .vin_name = "vcc5",
+ .n_voltages = 0x33,
.enable_time_us = 230,
},
{
.name = "ldo5",
- .min_uV = 1000000,
- .max_uV = 3300000,
- .n_voltages = 24,
+ .vin_name = "vcc4",
+ .n_voltages = 0x1A,
.enable_time_us = 230,
},
{
.name = "ldo6",
- .min_uV = 1000000,
- .max_uV = 3300000,
- .n_voltages = 24,
+ .vin_name = "vcc3",
+ .n_voltages = 0x1A,
.enable_time_us = 230,
},
{
.name = "ldo7",
- .min_uV = 1000000,
- .max_uV = 3300000,
- .n_voltages = 24,
+ .vin_name = "vcc3",
+ .n_voltages = 0x1A,
.enable_time_us = 230,
},
{
.name = "ldo8",
- .min_uV = 1000000,
- .max_uV = 3300000,
- .n_voltages = 24,
+ .vin_name = "vcc3",
+ .n_voltages = 0x1A,
.enable_time_us = 230,
},
};
@@ -321,7 +296,6 @@
struct tps65910 *mfd;
struct regulator_dev **rdev;
struct tps_info **info;
- struct mutex mutex;
int num_regulators;
int mode;
int (*get_ctrl_reg)(int);
@@ -329,71 +303,6 @@
unsigned int board_ext_control[TPS65910_NUM_REGS];
};
-static inline int tps65910_read(struct tps65910_reg *pmic, u8 reg)
-{
- unsigned int val;
- int err;
-
- err = tps65910_reg_read(pmic->mfd, reg, &val);
- if (err)
- return err;
-
- return val;
-}
-
-static int tps65910_modify_bits(struct tps65910_reg *pmic, u8 reg,
- u8 set_mask, u8 clear_mask)
-{
- int err, data;
-
- mutex_lock(&pmic->mutex);
-
- data = tps65910_read(pmic, reg);
- if (data < 0) {
- dev_err(pmic->mfd->dev, "Read from reg 0x%x failed\n", reg);
- err = data;
- goto out;
- }
-
- data &= ~clear_mask;
- data |= set_mask;
- err = tps65910_reg_write(pmic->mfd, reg, data);
- if (err)
- dev_err(pmic->mfd->dev, "Write for reg 0x%x failed\n", reg);
-
-out:
- mutex_unlock(&pmic->mutex);
- return err;
-}
-
-static int tps65910_reg_read_locked(struct tps65910_reg *pmic, u8 reg)
-{
- int data;
-
- mutex_lock(&pmic->mutex);
-
- data = tps65910_read(pmic, reg);
- if (data < 0)
- dev_err(pmic->mfd->dev, "Read from reg 0x%x failed\n", reg);
-
- mutex_unlock(&pmic->mutex);
- return data;
-}
-
-static int tps65910_reg_write_locked(struct tps65910_reg *pmic, u8 reg, u8 val)
-{
- int err;
-
- mutex_lock(&pmic->mutex);
-
- err = tps65910_reg_write(pmic->mfd, reg, val);
- if (err < 0)
- dev_err(pmic->mfd->dev, "Write for reg 0x%x failed\n", reg);
-
- mutex_unlock(&pmic->mutex);
- return err;
-}
-
static int tps65910_get_ctrl_register(int id)
{
switch (id) {
@@ -462,13 +371,6 @@
}
}
-static int tps65910_enable_time(struct regulator_dev *dev)
-{
- struct tps65910_reg *pmic = rdev_get_drvdata(dev);
- int id = rdev_get_id(dev);
- return pmic->info[id]->enable_time_us;
-}
-
static int tps65910_set_mode(struct regulator_dev *dev, unsigned int mode)
{
struct tps65910_reg *pmic = rdev_get_drvdata(dev);
@@ -481,8 +383,9 @@
switch (mode) {
case REGULATOR_MODE_NORMAL:
- return tps65910_modify_bits(pmic, reg, LDO_ST_ON_BIT,
- LDO_ST_MODE_BIT);
+ return tps65910_reg_update_bits(pmic->mfd, reg,
+ LDO_ST_MODE_BIT | LDO_ST_ON_BIT,
+ LDO_ST_ON_BIT);
case REGULATOR_MODE_IDLE:
value = LDO_ST_ON_BIT | LDO_ST_MODE_BIT;
return tps65910_reg_set_bits(mfd, reg, value);
@@ -496,15 +399,15 @@
static unsigned int tps65910_get_mode(struct regulator_dev *dev)
{
struct tps65910_reg *pmic = rdev_get_drvdata(dev);
- int reg, value, id = rdev_get_id(dev);
+ int ret, reg, value, id = rdev_get_id(dev);
reg = pmic->get_ctrl_reg(id);
if (reg < 0)
return reg;
- value = tps65910_reg_read_locked(pmic, reg);
- if (value < 0)
- return value;
+ ret = tps65910_reg_read(pmic->mfd, reg, &value);
+ if (ret < 0)
+ return ret;
if (!(value & LDO_ST_ON_BIT))
return REGULATOR_MODE_STANDBY;
@@ -517,33 +420,51 @@
static int tps65910_get_voltage_dcdc_sel(struct regulator_dev *dev)
{
struct tps65910_reg *pmic = rdev_get_drvdata(dev);
- int id = rdev_get_id(dev);
+ int ret, id = rdev_get_id(dev);
int opvsel = 0, srvsel = 0, vselmax = 0, mult = 0, sr = 0;
switch (id) {
case TPS65910_REG_VDD1:
- opvsel = tps65910_reg_read_locked(pmic, TPS65910_VDD1_OP);
- mult = tps65910_reg_read_locked(pmic, TPS65910_VDD1);
+ ret = tps65910_reg_read(pmic->mfd, TPS65910_VDD1_OP, &opvsel);
+ if (ret < 0)
+ return ret;
+ ret = tps65910_reg_read(pmic->mfd, TPS65910_VDD1, &mult);
+ if (ret < 0)
+ return ret;
mult = (mult & VDD1_VGAIN_SEL_MASK) >> VDD1_VGAIN_SEL_SHIFT;
- srvsel = tps65910_reg_read_locked(pmic, TPS65910_VDD1_SR);
+ ret = tps65910_reg_read(pmic->mfd, TPS65910_VDD1_SR, &srvsel);
+ if (ret < 0)
+ return ret;
sr = opvsel & VDD1_OP_CMD_MASK;
opvsel &= VDD1_OP_SEL_MASK;
srvsel &= VDD1_SR_SEL_MASK;
vselmax = 75;
break;
case TPS65910_REG_VDD2:
- opvsel = tps65910_reg_read_locked(pmic, TPS65910_VDD2_OP);
- mult = tps65910_reg_read_locked(pmic, TPS65910_VDD2);
+ ret = tps65910_reg_read(pmic->mfd, TPS65910_VDD2_OP, &opvsel);
+ if (ret < 0)
+ return ret;
+ ret = tps65910_reg_read(pmic->mfd, TPS65910_VDD2, &mult);
+ if (ret < 0)
+ return ret;
mult = (mult & VDD2_VGAIN_SEL_MASK) >> VDD2_VGAIN_SEL_SHIFT;
- srvsel = tps65910_reg_read_locked(pmic, TPS65910_VDD2_SR);
+ ret = tps65910_reg_read(pmic->mfd, TPS65910_VDD2_SR, &srvsel);
+ if (ret < 0)
+ return ret;
sr = opvsel & VDD2_OP_CMD_MASK;
opvsel &= VDD2_OP_SEL_MASK;
srvsel &= VDD2_SR_SEL_MASK;
vselmax = 75;
break;
case TPS65911_REG_VDDCTRL:
- opvsel = tps65910_reg_read_locked(pmic, TPS65911_VDDCTRL_OP);
- srvsel = tps65910_reg_read_locked(pmic, TPS65911_VDDCTRL_SR);
+ ret = tps65910_reg_read(pmic->mfd, TPS65911_VDDCTRL_OP,
+ &opvsel);
+ if (ret < 0)
+ return ret;
+ ret = tps65910_reg_read(pmic->mfd, TPS65911_VDDCTRL_SR,
+ &srvsel);
+ if (ret < 0)
+ return ret;
sr = opvsel & VDDCTRL_OP_CMD_MASK;
opvsel &= VDDCTRL_OP_SEL_MASK;
srvsel &= VDDCTRL_SR_SEL_MASK;
@@ -577,15 +498,15 @@
static int tps65910_get_voltage_sel(struct regulator_dev *dev)
{
struct tps65910_reg *pmic = rdev_get_drvdata(dev);
- int reg, value, id = rdev_get_id(dev);
+ int ret, reg, value, id = rdev_get_id(dev);
reg = pmic->get_ctrl_reg(id);
if (reg < 0)
return reg;
- value = tps65910_reg_read_locked(pmic, reg);
- if (value < 0)
- return value;
+ ret = tps65910_reg_read(pmic->mfd, reg, &value);
+ if (ret < 0)
+ return ret;
switch (id) {
case TPS65910_REG_VIO:
@@ -609,18 +530,20 @@
static int tps65910_get_voltage_vdd3(struct regulator_dev *dev)
{
- return 5 * 1000 * 1000;
+ return dev->desc->volt_table[0];
}
static int tps65911_get_voltage_sel(struct regulator_dev *dev)
{
struct tps65910_reg *pmic = rdev_get_drvdata(dev);
- int id = rdev_get_id(dev);
- u8 value, reg;
+ int ret, id = rdev_get_id(dev);
+ unsigned int value, reg;
reg = pmic->get_ctrl_reg(id);
- value = tps65910_reg_read_locked(pmic, reg);
+ ret = tps65910_reg_read(pmic->mfd, reg, &value);
+ if (ret < 0)
+ return ret;
switch (id) {
case TPS65911_REG_LDO1:
@@ -662,10 +585,10 @@
dcdc_mult--;
vsel = (selector % VDD1_2_NUM_VOLT_FINE) + 3;
- tps65910_modify_bits(pmic, TPS65910_VDD1,
- (dcdc_mult << VDD1_VGAIN_SEL_SHIFT),
- VDD1_VGAIN_SEL_MASK);
- tps65910_reg_write_locked(pmic, TPS65910_VDD1_OP, vsel);
+ tps65910_reg_update_bits(pmic->mfd, TPS65910_VDD1,
+ VDD1_VGAIN_SEL_MASK,
+ dcdc_mult << VDD1_VGAIN_SEL_SHIFT);
+ tps65910_reg_write(pmic->mfd, TPS65910_VDD1_OP, vsel);
break;
case TPS65910_REG_VDD2:
dcdc_mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1;
@@ -673,14 +596,14 @@
dcdc_mult--;
vsel = (selector % VDD1_2_NUM_VOLT_FINE) + 3;
- tps65910_modify_bits(pmic, TPS65910_VDD2,
- (dcdc_mult << VDD2_VGAIN_SEL_SHIFT),
- VDD1_VGAIN_SEL_MASK);
- tps65910_reg_write_locked(pmic, TPS65910_VDD2_OP, vsel);
+ tps65910_reg_update_bits(pmic->mfd, TPS65910_VDD2,
+ VDD1_VGAIN_SEL_MASK,
+ dcdc_mult << VDD2_VGAIN_SEL_SHIFT);
+ tps65910_reg_write(pmic->mfd, TPS65910_VDD2_OP, vsel);
break;
case TPS65911_REG_VDDCTRL:
vsel = selector + 3;
- tps65910_reg_write_locked(pmic, TPS65911_VDDCTRL_OP, vsel);
+ tps65910_reg_write(pmic->mfd, TPS65911_VDDCTRL_OP, vsel);
}
return 0;
@@ -706,8 +629,8 @@
case TPS65910_REG_VAUX2:
case TPS65910_REG_VAUX33:
case TPS65910_REG_VMMC:
- return tps65910_modify_bits(pmic, reg,
- (selector << LDO_SEL_SHIFT), LDO_SEL_MASK);
+ return tps65910_reg_update_bits(pmic->mfd, reg, LDO_SEL_MASK,
+ selector << LDO_SEL_SHIFT);
}
return -EINVAL;
@@ -727,18 +650,18 @@
case TPS65911_REG_LDO1:
case TPS65911_REG_LDO2:
case TPS65911_REG_LDO4:
- return tps65910_modify_bits(pmic, reg,
- (selector << LDO_SEL_SHIFT), LDO1_SEL_MASK);
+ return tps65910_reg_update_bits(pmic->mfd, reg, LDO1_SEL_MASK,
+ selector << LDO_SEL_SHIFT);
case TPS65911_REG_LDO3:
case TPS65911_REG_LDO5:
case TPS65911_REG_LDO6:
case TPS65911_REG_LDO7:
case TPS65911_REG_LDO8:
- return tps65910_modify_bits(pmic, reg,
- (selector << LDO_SEL_SHIFT), LDO3_SEL_MASK);
+ return tps65910_reg_update_bits(pmic->mfd, reg, LDO3_SEL_MASK,
+ selector << LDO_SEL_SHIFT);
case TPS65910_REG_VIO:
- return tps65910_modify_bits(pmic, reg,
- (selector << LDO_SEL_SHIFT), LDO_SEL_MASK);
+ return tps65910_reg_update_bits(pmic->mfd, reg, LDO_SEL_MASK,
+ selector << LDO_SEL_SHIFT);
}
return -EINVAL;
@@ -768,23 +691,6 @@
return volt * 100 * mult;
}
-static int tps65910_list_voltage(struct regulator_dev *dev,
- unsigned selector)
-{
- struct tps65910_reg *pmic = rdev_get_drvdata(dev);
- int id = rdev_get_id(dev), voltage;
-
- if (id < TPS65910_REG_VIO || id > TPS65910_REG_VMMC)
- return -EINVAL;
-
- if (selector >= pmic->info[id]->n_voltages)
- return -EINVAL;
- else
- voltage = pmic->info[id]->voltage_table[selector] * 1000;
-
- return voltage;
-}
-
static int tps65911_list_voltage(struct regulator_dev *dev, unsigned selector)
{
struct tps65910_reg *pmic = rdev_get_drvdata(dev);
@@ -816,7 +722,7 @@
step_mv = 100;
break;
case TPS65910_REG_VIO:
- return pmic->info[id]->voltage_table[selector] * 1000;
+ return pmic->info[id]->voltage_table[selector];
default:
return -EINVAL;
}
@@ -824,42 +730,16 @@
return (LDO_MIN_VOLT + selector * step_mv) * 1000;
}
-static int tps65910_set_voltage_dcdc_time_sel(struct regulator_dev *dev,
- unsigned int old_selector, unsigned int new_selector)
-{
- int id = rdev_get_id(dev);
- int old_volt, new_volt;
-
- old_volt = tps65910_list_voltage_dcdc(dev, old_selector);
- if (old_volt < 0)
- return old_volt;
-
- new_volt = tps65910_list_voltage_dcdc(dev, new_selector);
- if (new_volt < 0)
- return new_volt;
-
- /* VDD1 and VDD2 are 12.5mV/us, VDDCTRL is 100mV/20us */
- switch (id) {
- case TPS65910_REG_VDD1:
- case TPS65910_REG_VDD2:
- return DIV_ROUND_UP(abs(old_volt - new_volt), 12500);
- case TPS65911_REG_VDDCTRL:
- return DIV_ROUND_UP(abs(old_volt - new_volt), 5000);
- }
- return -EINVAL;
-}
-
/* Regulator ops (except VRTC) */
static struct regulator_ops tps65910_ops_dcdc = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
- .enable_time = tps65910_enable_time,
.set_mode = tps65910_set_mode,
.get_mode = tps65910_get_mode,
.get_voltage_sel = tps65910_get_voltage_dcdc_sel,
.set_voltage_sel = tps65910_set_voltage_dcdc_sel,
- .set_voltage_time_sel = tps65910_set_voltage_dcdc_time_sel,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
.list_voltage = tps65910_list_voltage_dcdc,
};
@@ -867,30 +747,27 @@
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
- .enable_time = tps65910_enable_time,
.set_mode = tps65910_set_mode,
.get_mode = tps65910_get_mode,
.get_voltage = tps65910_get_voltage_vdd3,
- .list_voltage = tps65910_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
};
static struct regulator_ops tps65910_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
- .enable_time = tps65910_enable_time,
.set_mode = tps65910_set_mode,
.get_mode = tps65910_get_mode,
.get_voltage_sel = tps65910_get_voltage_sel,
.set_voltage_sel = tps65910_set_voltage_sel,
- .list_voltage = tps65910_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
};
static struct regulator_ops tps65911_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
- .enable_time = tps65910_enable_time,
.set_mode = tps65910_set_mode,
.get_mode = tps65910_get_mode,
.get_voltage_sel = tps65911_get_voltage_sel,
@@ -996,19 +873,27 @@
(tps65910_chip_id(mfd) == TPS65911))) {
int op_reg_add = pmic->get_ctrl_reg(id) + 1;
int sr_reg_add = pmic->get_ctrl_reg(id) + 2;
- int opvsel = tps65910_reg_read_locked(pmic, op_reg_add);
- int srvsel = tps65910_reg_read_locked(pmic, sr_reg_add);
+ int opvsel, srvsel;
+
+ ret = tps65910_reg_read(pmic->mfd, op_reg_add, &opvsel);
+ if (ret < 0)
+ return ret;
+ ret = tps65910_reg_read(pmic->mfd, sr_reg_add, &srvsel);
+ if (ret < 0)
+ return ret;
+
if (opvsel & VDD1_OP_CMD_MASK) {
u8 reg_val = srvsel & VDD1_OP_SEL_MASK;
- ret = tps65910_reg_write_locked(pmic, op_reg_add,
- reg_val);
+
+ ret = tps65910_reg_write(pmic->mfd, op_reg_add,
+ reg_val);
if (ret < 0) {
dev_err(mfd->dev,
"Error in configuring op register\n");
return ret;
}
}
- ret = tps65910_reg_write_locked(pmic, sr_reg_add, 0);
+ ret = tps65910_reg_write(pmic->mfd, sr_reg_add, 0);
if (ret < 0) {
dev_err(mfd->dev, "Error in settting sr register\n");
return ret;
@@ -1126,6 +1011,7 @@
"ti,regulator-ext-sleep-control", &prop);
if (!ret)
pmic_plat_data->regulator_ext_sleep_control[idx] = prop;
+
}
return pmic_plat_data;
@@ -1136,7 +1022,7 @@
struct of_regulator_match **tps65910_reg_matches)
{
*tps65910_reg_matches = NULL;
- return 0;
+ return NULL;
}
#endif
@@ -1168,7 +1054,6 @@
return -ENOMEM;
}
- mutex_init(&pmic->mutex);
pmic->mfd = tps65910;
platform_set_drvdata(pdev, pmic);
@@ -1229,23 +1114,31 @@
pmic->info[i] = info;
pmic->desc[i].name = info->name;
+ pmic->desc[i].supply_name = info->vin_name;
pmic->desc[i].id = i;
pmic->desc[i].n_voltages = info->n_voltages;
+ pmic->desc[i].enable_time = info->enable_time_us;
if (i == TPS65910_REG_VDD1 || i == TPS65910_REG_VDD2) {
pmic->desc[i].ops = &tps65910_ops_dcdc;
pmic->desc[i].n_voltages = VDD1_2_NUM_VOLT_FINE *
VDD1_2_NUM_VOLT_COARSE;
+ pmic->desc[i].ramp_delay = 12500;
} else if (i == TPS65910_REG_VDD3) {
- if (tps65910_chip_id(tps65910) == TPS65910)
+ if (tps65910_chip_id(tps65910) == TPS65910) {
pmic->desc[i].ops = &tps65910_ops_vdd3;
- else
+ pmic->desc[i].volt_table = info->voltage_table;
+ } else {
pmic->desc[i].ops = &tps65910_ops_dcdc;
+ pmic->desc[i].ramp_delay = 5000;
+ }
} else {
- if (tps65910_chip_id(tps65910) == TPS65910)
+ if (tps65910_chip_id(tps65910) == TPS65910) {
pmic->desc[i].ops = &tps65910_ops;
- else
+ pmic->desc[i].volt_table = info->voltage_table;
+ } else {
pmic->desc[i].ops = &tps65911_ops;
+ }
}
err = tps65910_set_ext_sleep_config(pmic, i,
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index c739071..242fe90 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -43,9 +43,6 @@
u8 table_len;
const u16 *table;
- /* regulator specific turn-on delay */
- u16 delay;
-
/* State REMAP default configuration */
u8 remap;
@@ -223,20 +220,6 @@
return ret;
}
-static int twl4030reg_enable_time(struct regulator_dev *rdev)
-{
- struct twlreg_info *info = rdev_get_drvdata(rdev);
-
- return info->delay;
-}
-
-static int twl6030reg_enable_time(struct regulator_dev *rdev)
-{
- struct twlreg_info *info = rdev_get_drvdata(rdev);
-
- return info->delay;
-}
-
static int twl4030reg_disable(struct regulator_dev *rdev)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
@@ -508,7 +491,6 @@
.enable = twl4030reg_enable,
.disable = twl4030reg_disable,
.is_enabled = twl4030reg_is_enabled,
- .enable_time = twl4030reg_enable_time,
.set_mode = twl4030reg_set_mode,
@@ -577,59 +559,53 @@
.get_voltage = twl6030coresmps_get_voltage,
};
-static int twl6030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
+static int twl6030ldo_list_voltage(struct regulator_dev *rdev, unsigned sel)
{
- struct twlreg_info *info = rdev_get_drvdata(rdev);
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
- return ((info->min_mV + (index * 100)) * 1000);
+ switch (sel) {
+ case 0:
+ return 0;
+ case 1 ... 24:
+ /* Linear mapping from 00000001 to 00011000:
+ * Absolute voltage value = 1.0 V + 0.1 V × (sel – 00000001)
+ */
+ return (info->min_mV + 100 * (sel - 1)) * 1000;
+ case 25 ... 30:
+ return -EINVAL;
+ case 31:
+ return 2750000;
+ default:
+ return -EINVAL;
+ }
}
static int
-twl6030ldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
- unsigned *selector)
+twl6030ldo_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
- int vsel;
- if ((min_uV/1000 < info->min_mV) || (max_uV/1000 > info->max_mV))
- return -EDOM;
-
- /*
- * Use the below formula to calculate vsel
- * mV = 1000mv + 100mv * (vsel - 1)
- */
- vsel = (min_uV/1000 - 1000)/100 + 1;
- *selector = vsel;
- return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE, vsel);
-
+ return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE,
+ selector);
}
-static int twl6030ldo_get_voltage(struct regulator_dev *rdev)
+static int twl6030ldo_get_voltage_sel(struct regulator_dev *rdev)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
- int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER,
- VREG_VOLTAGE);
+ int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE);
- if (vsel < 0)
- return vsel;
-
- /*
- * Use the below formula to calculate vsel
- * mV = 1000mv + 100mv * (vsel - 1)
- */
- return (1000 + (100 * (vsel - 1))) * 1000;
+ return vsel;
}
static struct regulator_ops twl6030ldo_ops = {
.list_voltage = twl6030ldo_list_voltage,
- .set_voltage = twl6030ldo_set_voltage,
- .get_voltage = twl6030ldo_get_voltage,
+ .set_voltage_sel = twl6030ldo_set_voltage_sel,
+ .get_voltage_sel = twl6030ldo_get_voltage_sel,
.enable = twl6030reg_enable,
.disable = twl6030reg_disable,
.is_enabled = twl6030reg_is_enabled,
- .enable_time = twl6030reg_enable_time,
.set_mode = twl6030reg_set_mode,
@@ -663,7 +639,6 @@
.enable = twl4030reg_enable,
.disable = twl4030reg_disable,
.is_enabled = twl4030reg_is_enabled,
- .enable_time = twl4030reg_enable_time,
.set_mode = twl4030reg_set_mode,
@@ -678,7 +653,6 @@
.enable = twl6030reg_enable,
.disable = twl6030reg_disable,
.is_enabled = twl6030reg_is_enabled,
- .enable_time = twl6030reg_enable_time,
.set_mode = twl6030reg_set_mode,
@@ -689,7 +663,6 @@
.enable = twl6030reg_enable,
.disable = twl6030reg_disable,
.is_enabled = twl6030reg_is_enabled,
- .enable_time = twl6030reg_enable_time,
.get_status = twl6030reg_get_status,
};
@@ -886,7 +859,6 @@
.enable = twl6030reg_enable,
.disable = twl6030reg_disable,
.is_enabled = twl6030reg_is_enabled,
- .enable_time = twl6030reg_enable_time,
.set_mode = twl6030reg_set_mode,
@@ -909,7 +881,6 @@
.id = num, \
.table_len = ARRAY_SIZE(label##_VSEL_table), \
.table = label##_VSEL_table, \
- .delay = turnon_delay, \
.remap = remap_conf, \
.desc = { \
.name = #label, \
@@ -918,6 +889,7 @@
.ops = &twl4030ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
+ .enable_time = turnon_delay, \
}, \
}
@@ -925,7 +897,6 @@
static struct twlreg_info TWL4030_INFO_##label = { \
.base = offset, \
.id = num, \
- .delay = turnon_delay, \
.remap = remap_conf, \
.desc = { \
.name = #label, \
@@ -933,6 +904,7 @@
.ops = &twl4030smps_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
+ .enable_time = turnon_delay, \
}, \
}
@@ -955,7 +927,7 @@
.desc = { \
.name = #label, \
.id = TWL6030_REG_##label, \
- .n_voltages = (max_mVolts - min_mVolts)/100 + 1, \
+ .n_voltages = 32, \
.ops = &twl6030ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
@@ -970,7 +942,7 @@
.desc = { \
.name = #label, \
.id = TWL6025_REG_##label, \
- .n_voltages = ((max_mVolts - min_mVolts)/100) + 1, \
+ .n_voltages = 32, \
.ops = &twl6030ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
@@ -983,7 +955,6 @@
.base = offset, \
.id = num, \
.min_mV = mVolts, \
- .delay = turnon_delay, \
.remap = remap_conf, \
.desc = { \
.name = #label, \
@@ -992,19 +963,20 @@
.ops = &operations, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
+ .enable_time = turnon_delay, \
}, \
}
#define TWL6030_FIXED_RESOURCE(label, offset, turnon_delay) \
static struct twlreg_info TWLRES_INFO_##label = { \
.base = offset, \
- .delay = turnon_delay, \
.desc = { \
.name = #label, \
.id = TWL6030_REG_##label, \
.ops = &twl6030_fixed_resource, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
+ .enable_time = turnon_delay, \
}, \
}
@@ -1109,7 +1081,6 @@
#define TWL6030_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL6030, label)
#define TWL6025_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL6025, label)
#define TWLFIXED_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLFIXED, label)
-#define TWLRES_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLRES, label)
#define TWLSMPS_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLSMPS, label)
static const struct of_device_id twl_of_match[] __devinitconst = {
@@ -1157,7 +1128,6 @@
TWLFIXED_OF_MATCH("ti,twl6030-vusb", VUSB),
TWLFIXED_OF_MATCH("ti,twl6030-v1v8", V1V8),
TWLFIXED_OF_MATCH("ti,twl6030-v2v1", V2V1),
- TWLRES_OF_MATCH("ti,twl6030-clk32kg", CLK32KG),
TWLSMPS_OF_MATCH("ti,twl6025-smps3", SMPS3),
TWLSMPS_OF_MATCH("ti,twl6025-smps4", SMPS4),
TWLSMPS_OF_MATCH("ti,twl6025-vio", VIO),
diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
index 099da11..7413885 100644
--- a/drivers/regulator/wm831x-dcdc.c
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -215,8 +215,8 @@
return -EINVAL;
}
-static int wm831x_buckv_select_min_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV)
+static int wm831x_buckv_map_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
{
u16 vsel;
@@ -251,20 +251,14 @@
return 0;
}
-static int wm831x_buckv_set_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV, unsigned *selector)
+static int wm831x_buckv_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned vsel)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
int on_reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
int dvs_reg = dcdc->base + WM831X_DCDC_DVS_CONTROL;
- int vsel, ret;
-
- vsel = wm831x_buckv_select_min_voltage(rdev, min_uV, max_uV);
- if (vsel < 0)
- return vsel;
-
- *selector = vsel;
+ int ret;
/* If this value is already set then do a GPIO update if we can */
if (dcdc->dvs_gpio && dcdc->on_vsel == vsel)
@@ -315,7 +309,7 @@
u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
int vsel;
- vsel = wm831x_buckv_select_min_voltage(rdev, uV, uV);
+ vsel = wm831x_buckv_map_voltage(rdev, uV, uV);
if (vsel < 0)
return vsel;
@@ -373,9 +367,10 @@
}
static struct regulator_ops wm831x_buckv_ops = {
- .set_voltage = wm831x_buckv_set_voltage,
+ .set_voltage_sel = wm831x_buckv_set_voltage_sel,
.get_voltage_sel = wm831x_buckv_get_voltage_sel,
.list_voltage = wm831x_buckv_list_voltage,
+ .map_voltage = wm831x_buckv_map_voltage,
.set_suspend_voltage = wm831x_buckv_set_suspend_voltage,
.set_current_limit = wm831x_buckv_set_current_limit,
.get_current_limit = wm831x_buckv_get_current_limit,
@@ -599,60 +594,25 @@
* BUCKP specifics
*/
-static int wm831x_buckp_list_voltage(struct regulator_dev *rdev,
- unsigned selector)
-{
- if (selector <= WM831X_BUCKP_MAX_SELECTOR)
- return 850000 + (selector * 25000);
- else
- return -EINVAL;
-}
-
-static int wm831x_buckp_set_voltage_int(struct regulator_dev *rdev, int reg,
- int min_uV, int max_uV, int *selector)
+static int wm831x_buckp_set_suspend_voltage(struct regulator_dev *rdev, int uV)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
- u16 vsel;
-
- if (min_uV <= 34000000)
- vsel = (min_uV - 850000) / 25000;
- else
- return -EINVAL;
-
- if (wm831x_buckp_list_voltage(rdev, vsel) > max_uV)
- return -EINVAL;
-
- *selector = vsel;
-
- return wm831x_set_bits(wm831x, reg, WM831X_DC3_ON_VSEL_MASK, vsel);
-}
-
-static int wm831x_buckp_set_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV,
- unsigned *selector)
-{
- struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
- u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
-
- return wm831x_buckp_set_voltage_int(rdev, reg, min_uV, max_uV,
- selector);
-}
-
-static int wm831x_buckp_set_suspend_voltage(struct regulator_dev *rdev,
- int uV)
-{
- struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
- unsigned selector;
+ int sel;
- return wm831x_buckp_set_voltage_int(rdev, reg, uV, uV, &selector);
+ sel = regulator_map_voltage_linear(rdev, uV, uV);
+ if (sel < 0)
+ return sel;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_DC3_ON_VSEL_MASK, sel);
}
static struct regulator_ops wm831x_buckp_ops = {
- .set_voltage = wm831x_buckp_set_voltage,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .list_voltage = wm831x_buckp_list_voltage,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
.set_suspend_voltage = wm831x_buckp_set_suspend_voltage,
.is_enabled = regulator_is_enabled_regmap,
@@ -715,6 +675,8 @@
dcdc->desc.vsel_mask = WM831X_DC3_ON_VSEL_MASK;
dcdc->desc.enable_reg = WM831X_DCDC_ENABLE;
dcdc->desc.enable_mask = 1 << id;
+ dcdc->desc.min_uV = 850000;
+ dcdc->desc.uV_step = 25000;
config.dev = pdev->dev.parent;
if (pdata)
diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c
index a9a28d8..5cb70ca 100644
--- a/drivers/regulator/wm831x-ldo.c
+++ b/drivers/regulator/wm831x-ldo.c
@@ -78,13 +78,10 @@
return -EINVAL;
}
-static int wm831x_gp_ldo_set_voltage_int(struct regulator_dev *rdev, int reg,
- int min_uV, int max_uV,
- unsigned *selector)
+static int wm831x_gp_ldo_map_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
{
- struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- struct wm831x *wm831x = ldo->wm831x;
- int vsel, ret;
+ int volt, vsel;
if (min_uV < 900000)
vsel = 0;
@@ -94,36 +91,25 @@
vsel = ((min_uV - 1700000) / 100000)
+ WM831X_GP_LDO_SELECTOR_LOW + 1;
- ret = wm831x_gp_ldo_list_voltage(rdev, vsel);
- if (ret < 0)
- return ret;
- if (ret < min_uV || ret > max_uV)
+ volt = wm831x_gp_ldo_list_voltage(rdev, vsel);
+ if (volt < min_uV || volt > max_uV)
return -EINVAL;
- *selector = vsel;
-
- return wm831x_set_bits(wm831x, reg, WM831X_LDO1_ON_VSEL_MASK, vsel);
-}
-
-static int wm831x_gp_ldo_set_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV,
- unsigned *selector)
-{
- struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- int reg = ldo->base + WM831X_LDO_ON_CONTROL;
-
- return wm831x_gp_ldo_set_voltage_int(rdev, reg, min_uV, max_uV,
- selector);
+ return vsel;
}
static int wm831x_gp_ldo_set_suspend_voltage(struct regulator_dev *rdev,
int uV)
{
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
- unsigned int selector;
+ struct wm831x *wm831x = ldo->wm831x;
+ int sel, reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
- return wm831x_gp_ldo_set_voltage_int(rdev, reg, uV, uV, &selector);
+ sel = wm831x_gp_ldo_map_voltage(rdev, uV, uV);
+ if (sel < 0)
+ return sel;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_LDO1_ON_VSEL_MASK, sel);
}
static unsigned int wm831x_gp_ldo_get_mode(struct regulator_dev *rdev)
@@ -243,8 +229,9 @@
static struct regulator_ops wm831x_gp_ldo_ops = {
.list_voltage = wm831x_gp_ldo_list_voltage,
+ .map_voltage = wm831x_gp_ldo_map_voltage,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage = wm831x_gp_ldo_set_voltage,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_suspend_voltage = wm831x_gp_ldo_set_suspend_voltage,
.get_mode = wm831x_gp_ldo_get_mode,
.set_mode = wm831x_gp_ldo_set_mode,
@@ -384,13 +371,10 @@
return -EINVAL;
}
-static int wm831x_aldo_set_voltage_int(struct regulator_dev *rdev, int reg,
- int min_uV, int max_uV,
- unsigned *selector)
+static int wm831x_aldo_map_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
{
- struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- struct wm831x *wm831x = ldo->wm831x;
- int vsel, ret;
+ int volt, vsel;
if (min_uV < 1000000)
vsel = 0;
@@ -400,35 +384,26 @@
vsel = ((min_uV - 1700000) / 100000)
+ WM831X_ALDO_SELECTOR_LOW + 1;
- ret = wm831x_aldo_list_voltage(rdev, vsel);
- if (ret < 0)
- return ret;
- if (ret < min_uV || ret > max_uV)
+ volt = wm831x_aldo_list_voltage(rdev, vsel);
+ if (volt < min_uV || volt > max_uV)
return -EINVAL;
- *selector = vsel;
+ return vsel;
- return wm831x_set_bits(wm831x, reg, WM831X_LDO7_ON_VSEL_MASK, vsel);
-}
-
-static int wm831x_aldo_set_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV, unsigned *selector)
-{
- struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- int reg = ldo->base + WM831X_LDO_ON_CONTROL;
-
- return wm831x_aldo_set_voltage_int(rdev, reg, min_uV, max_uV,
- selector);
}
static int wm831x_aldo_set_suspend_voltage(struct regulator_dev *rdev,
int uV)
{
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
- unsigned int selector;
+ struct wm831x *wm831x = ldo->wm831x;
+ int sel, reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
- return wm831x_aldo_set_voltage_int(rdev, reg, uV, uV, &selector);
+ sel = wm831x_aldo_map_voltage(rdev, uV, uV);
+ if (sel < 0)
+ return sel;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_LDO7_ON_VSEL_MASK, sel);
}
static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev)
@@ -506,8 +481,9 @@
static struct regulator_ops wm831x_aldo_ops = {
.list_voltage = wm831x_aldo_list_voltage,
+ .map_voltage = wm831x_aldo_map_voltage,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage = wm831x_aldo_set_voltage,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_suspend_voltage = wm831x_aldo_set_suspend_voltage,
.get_mode = wm831x_aldo_get_mode,
.set_mode = wm831x_aldo_set_mode,
@@ -628,47 +604,18 @@
#define WM831X_ALIVE_LDO_MAX_SELECTOR 0xf
-static int wm831x_alive_ldo_set_voltage_int(struct regulator_dev *rdev,
- int reg,
- int min_uV, int max_uV,
- unsigned *selector)
-{
- struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- struct wm831x *wm831x = ldo->wm831x;
- int vsel, ret;
-
- vsel = (min_uV - 800000) / 50000;
-
- ret = regulator_list_voltage_linear(rdev, vsel);
- if (ret < 0)
- return ret;
- if (ret < min_uV || ret > max_uV)
- return -EINVAL;
-
- *selector = vsel;
-
- return wm831x_set_bits(wm831x, reg, WM831X_LDO11_ON_VSEL_MASK, vsel);
-}
-
-static int wm831x_alive_ldo_set_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV,
- unsigned *selector)
-{
- struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL;
-
- return wm831x_alive_ldo_set_voltage_int(rdev, reg, min_uV, max_uV,
- selector);
-}
-
static int wm831x_alive_ldo_set_suspend_voltage(struct regulator_dev *rdev,
int uV)
{
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- int reg = ldo->base + WM831X_ALIVE_LDO_SLEEP_CONTROL;
- unsigned selector;
+ struct wm831x *wm831x = ldo->wm831x;
+ int sel, reg = ldo->base + WM831X_ALIVE_LDO_SLEEP_CONTROL;
- return wm831x_alive_ldo_set_voltage_int(rdev, reg, uV, uV, &selector);
+ sel = regulator_map_voltage_linear(rdev, uV, uV);
+ if (sel < 0)
+ return sel;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_LDO11_ON_VSEL_MASK, sel);
}
static int wm831x_alive_ldo_get_status(struct regulator_dev *rdev)
@@ -690,8 +637,9 @@
static struct regulator_ops wm831x_alive_ldo_ops = {
.list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage = wm831x_alive_ldo_set_voltage,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_suspend_voltage = wm831x_alive_ldo_set_suspend_voltage,
.get_status = wm831x_alive_ldo_get_status,
@@ -753,6 +701,7 @@
ldo->desc.enable_mask = 1 << id;
ldo->desc.min_uV = 800000;
ldo->desc.uV_step = 50000;
+ ldo->desc.enable_time = 1000;
config.dev = pdev->dev.parent;
if (pdata)
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index 94e550d..7f0fa22 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -108,33 +108,6 @@
return -EINVAL;
}
-static inline int wm8350_ldo_val_to_mvolts(unsigned int val)
-{
- if (val < 16)
- return (val * 50) + 900;
- else
- return ((val - 16) * 100) + 1800;
-
-}
-
-static inline unsigned int wm8350_ldo_mvolts_to_val(int mV)
-{
- if (mV < 1800)
- return (mV - 900) / 50;
- else
- return ((mV - 1800) / 100) + 16;
-}
-
-static inline int wm8350_dcdc_val_to_mvolts(unsigned int val)
-{
- return (val * 25) + 850;
-}
-
-static inline unsigned int wm8350_dcdc_mvolts_to_val(int mV)
-{
- return (mV - 850) / 25;
-}
-
static int wm8350_isink_set_current(struct regulator_dev *rdev, int min_uA,
int max_uA)
{
@@ -359,104 +332,13 @@
}
EXPORT_SYMBOL_GPL(wm8350_isink_set_flash);
-static int wm8350_dcdc_set_voltage(struct regulator_dev *rdev, int min_uV,
- int max_uV, unsigned *selector)
-{
- struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
- int volt_reg, dcdc = rdev_get_id(rdev), mV,
- min_mV = min_uV / 1000, max_mV = max_uV / 1000;
- u16 val;
-
- if (min_mV < 850 || min_mV > 4025)
- return -EINVAL;
- if (max_mV < 850 || max_mV > 4025)
- return -EINVAL;
-
- /* step size is 25mV */
- mV = (min_mV - 826) / 25;
- if (wm8350_dcdc_val_to_mvolts(mV) > max_mV)
- return -EINVAL;
- BUG_ON(wm8350_dcdc_val_to_mvolts(mV) < min_mV);
-
- switch (dcdc) {
- case WM8350_DCDC_1:
- volt_reg = WM8350_DCDC1_CONTROL;
- break;
- case WM8350_DCDC_3:
- volt_reg = WM8350_DCDC3_CONTROL;
- break;
- case WM8350_DCDC_4:
- volt_reg = WM8350_DCDC4_CONTROL;
- break;
- case WM8350_DCDC_6:
- volt_reg = WM8350_DCDC6_CONTROL;
- break;
- case WM8350_DCDC_2:
- case WM8350_DCDC_5:
- default:
- return -EINVAL;
- }
-
- *selector = mV;
-
- /* all DCDCs have same mV bits */
- val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_DC1_VSEL_MASK;
- wm8350_reg_write(wm8350, volt_reg, val | mV);
- return 0;
-}
-
-static int wm8350_dcdc_get_voltage_sel(struct regulator_dev *rdev)
-{
- struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
- int volt_reg, dcdc = rdev_get_id(rdev);
-
- switch (dcdc) {
- case WM8350_DCDC_1:
- volt_reg = WM8350_DCDC1_CONTROL;
- break;
- case WM8350_DCDC_3:
- volt_reg = WM8350_DCDC3_CONTROL;
- break;
- case WM8350_DCDC_4:
- volt_reg = WM8350_DCDC4_CONTROL;
- break;
- case WM8350_DCDC_6:
- volt_reg = WM8350_DCDC6_CONTROL;
- break;
- case WM8350_DCDC_2:
- case WM8350_DCDC_5:
- default:
- return -EINVAL;
- }
-
- /* all DCDCs have same mV bits */
- return wm8350_reg_read(wm8350, volt_reg) & WM8350_DC1_VSEL_MASK;
-}
-
-static int wm8350_dcdc_list_voltage(struct regulator_dev *rdev,
- unsigned selector)
-{
- if (selector > WM8350_DCDC_MAX_VSEL)
- return -EINVAL;
- return wm8350_dcdc_val_to_mvolts(selector) * 1000;
-}
-
static int wm8350_dcdc_set_suspend_voltage(struct regulator_dev *rdev, int uV)
{
struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
- int volt_reg, mV = uV / 1000, dcdc = rdev_get_id(rdev);
+ int sel, volt_reg, dcdc = rdev_get_id(rdev);
u16 val;
- dev_dbg(wm8350->dev, "%s %d mV %d\n", __func__, dcdc, mV);
-
- if (mV && (mV < 850 || mV > 4025)) {
- dev_err(wm8350->dev,
- "DCDC%d suspend voltage %d mV out of range\n",
- dcdc, mV);
- return -EINVAL;
- }
- if (mV == 0)
- mV = 850;
+ dev_dbg(wm8350->dev, "%s %d mV %d\n", __func__, dcdc, uV / 1000);
switch (dcdc) {
case WM8350_DCDC_1:
@@ -477,10 +359,13 @@
return -EINVAL;
}
+ sel = regulator_map_voltage_linear(rdev, uV, uV);
+ if (sel < 0)
+ return -EINVAL;
+
/* all DCDCs have same mV bits */
val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_DC1_VSEL_MASK;
- wm8350_reg_write(wm8350, volt_reg,
- val | wm8350_dcdc_mvolts_to_val(mV));
+ wm8350_reg_write(wm8350, volt_reg, val | sel);
return 0;
}
@@ -657,19 +542,49 @@
return 0;
}
+static int wm8350_ldo_list_voltage(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ if (selector > WM8350_LDO1_VSEL_MASK)
+ return -EINVAL;
+
+ if (selector < 16)
+ return (selector * 50000) + 900000;
+ else
+ return ((selector - 16) * 100000) + 1800000;
+}
+
+static int wm8350_ldo_map_voltage(struct regulator_dev *rdev, int min_uV,
+ int max_uV)
+{
+ int volt, sel;
+ int min_mV = min_uV / 1000;
+ int max_mV = max_uV / 1000;
+
+ if (min_mV < 900 || min_mV > 3300)
+ return -EINVAL;
+ if (max_mV < 900 || max_mV > 3300)
+ return -EINVAL;
+
+ if (min_mV < 1800) /* step size is 50mV < 1800mV */
+ sel = DIV_ROUND_UP(min_uV - 900, 50);
+ else /* step size is 100mV > 1800mV */
+ sel = DIV_ROUND_UP(min_uV - 1800, 100) + 16;
+
+ volt = wm8350_ldo_list_voltage(rdev, sel);
+ if (volt < min_uV || volt > max_uV)
+ return -EINVAL;
+
+ return sel;
+}
+
static int wm8350_ldo_set_suspend_voltage(struct regulator_dev *rdev, int uV)
{
struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
- int volt_reg, mV = uV / 1000, ldo = rdev_get_id(rdev);
+ int sel, volt_reg, ldo = rdev_get_id(rdev);
u16 val;
- dev_dbg(wm8350->dev, "%s %d mV %d\n", __func__, ldo, mV);
-
- if (mV < 900 || mV > 3300) {
- dev_err(wm8350->dev, "LDO%d voltage %d mV out of range\n",
- ldo, mV);
- return -EINVAL;
- }
+ dev_dbg(wm8350->dev, "%s %d mV %d\n", __func__, ldo, uV / 1000);
switch (ldo) {
case WM8350_LDO_1:
@@ -688,10 +603,13 @@
return -EINVAL;
}
+ sel = wm8350_ldo_map_voltage(rdev, uV, uV);
+ if (sel < 0)
+ return -EINVAL;
+
/* all LDOs have same mV bits */
val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_VSEL_MASK;
- wm8350_reg_write(wm8350, volt_reg,
- val | wm8350_ldo_mvolts_to_val(mV));
+ wm8350_reg_write(wm8350, volt_reg, val | sel);
return 0;
}
@@ -753,92 +671,6 @@
return 0;
}
-static int wm8350_ldo_set_voltage(struct regulator_dev *rdev, int min_uV,
- int max_uV, unsigned *selector)
-{
- struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
- int volt_reg, ldo = rdev_get_id(rdev), mV, min_mV = min_uV / 1000,
- max_mV = max_uV / 1000;
- u16 val;
-
- if (min_mV < 900 || min_mV > 3300)
- return -EINVAL;
- if (max_mV < 900 || max_mV > 3300)
- return -EINVAL;
-
- if (min_mV < 1800) {
- /* step size is 50mV < 1800mV */
- mV = (min_mV - 851) / 50;
- if (wm8350_ldo_val_to_mvolts(mV) > max_mV)
- return -EINVAL;
- BUG_ON(wm8350_ldo_val_to_mvolts(mV) < min_mV);
- } else {
- /* step size is 100mV > 1800mV */
- mV = ((min_mV - 1701) / 100) + 16;
- if (wm8350_ldo_val_to_mvolts(mV) > max_mV)
- return -EINVAL;
- BUG_ON(wm8350_ldo_val_to_mvolts(mV) < min_mV);
- }
-
- switch (ldo) {
- case WM8350_LDO_1:
- volt_reg = WM8350_LDO1_CONTROL;
- break;
- case WM8350_LDO_2:
- volt_reg = WM8350_LDO2_CONTROL;
- break;
- case WM8350_LDO_3:
- volt_reg = WM8350_LDO3_CONTROL;
- break;
- case WM8350_LDO_4:
- volt_reg = WM8350_LDO4_CONTROL;
- break;
- default:
- return -EINVAL;
- }
-
- *selector = mV;
-
- /* all LDOs have same mV bits */
- val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_VSEL_MASK;
- wm8350_reg_write(wm8350, volt_reg, val | mV);
- return 0;
-}
-
-static int wm8350_ldo_get_voltage_sel(struct regulator_dev *rdev)
-{
- struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
- int volt_reg, ldo = rdev_get_id(rdev);
-
- switch (ldo) {
- case WM8350_LDO_1:
- volt_reg = WM8350_LDO1_CONTROL;
- break;
- case WM8350_LDO_2:
- volt_reg = WM8350_LDO2_CONTROL;
- break;
- case WM8350_LDO_3:
- volt_reg = WM8350_LDO3_CONTROL;
- break;
- case WM8350_LDO_4:
- volt_reg = WM8350_LDO4_CONTROL;
- break;
- default:
- return -EINVAL;
- }
-
- /* all LDOs have same mV bits */
- return wm8350_reg_read(wm8350, volt_reg) & WM8350_LDO1_VSEL_MASK;
-}
-
-static int wm8350_ldo_list_voltage(struct regulator_dev *rdev,
- unsigned selector)
-{
- if (selector > WM8350_LDO1_VSEL_MASK)
- return -EINVAL;
- return wm8350_ldo_val_to_mvolts(selector) * 1000;
-}
-
int wm8350_dcdc_set_slot(struct wm8350 *wm8350, int dcdc, u16 start,
u16 stop, u16 fault)
{
@@ -959,63 +791,6 @@
}
EXPORT_SYMBOL_GPL(wm8350_dcdc25_set_mode);
-static int wm8350_dcdc_enable(struct regulator_dev *rdev)
-{
- struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
- int dcdc = rdev_get_id(rdev);
- u16 shift;
-
- if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6)
- return -EINVAL;
-
- shift = dcdc - WM8350_DCDC_1;
- wm8350_set_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, 1 << shift);
- return 0;
-}
-
-static int wm8350_dcdc_disable(struct regulator_dev *rdev)
-{
- struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
- int dcdc = rdev_get_id(rdev);
- u16 shift;
-
- if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6)
- return -EINVAL;
-
- shift = dcdc - WM8350_DCDC_1;
- wm8350_clear_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, 1 << shift);
-
- return 0;
-}
-
-static int wm8350_ldo_enable(struct regulator_dev *rdev)
-{
- struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
- int ldo = rdev_get_id(rdev);
- u16 shift;
-
- if (ldo < WM8350_LDO_1 || ldo > WM8350_LDO_4)
- return -EINVAL;
-
- shift = (ldo - WM8350_LDO_1) + 8;
- wm8350_set_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, 1 << shift);
- return 0;
-}
-
-static int wm8350_ldo_disable(struct regulator_dev *rdev)
-{
- struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
- int ldo = rdev_get_id(rdev);
- u16 shift;
-
- if (ldo < WM8350_LDO_1 || ldo > WM8350_LDO_4)
- return -EINVAL;
-
- shift = (ldo - WM8350_LDO_1) + 8;
- wm8350_clear_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, 1 << shift);
- return 0;
-}
-
static int force_continuous_enable(struct wm8350 *wm8350, int dcdc, int enable)
{
int reg = 0, ret;
@@ -1197,42 +972,17 @@
return mode;
}
-static int wm8350_dcdc_is_enabled(struct regulator_dev *rdev)
-{
- struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
- int dcdc = rdev_get_id(rdev), shift;
-
- if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6)
- return -EINVAL;
-
- shift = dcdc - WM8350_DCDC_1;
- return wm8350_reg_read(wm8350, WM8350_DCDC_LDO_REQUESTED)
- & (1 << shift);
-}
-
-static int wm8350_ldo_is_enabled(struct regulator_dev *rdev)
-{
- struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
- int ldo = rdev_get_id(rdev), shift;
-
- if (ldo < WM8350_LDO_1 || ldo > WM8350_LDO_4)
- return -EINVAL;
-
- shift = (ldo - WM8350_LDO_1) + 8;
- return wm8350_reg_read(wm8350, WM8350_DCDC_LDO_REQUESTED)
- & (1 << shift);
-}
-
static struct regulator_ops wm8350_dcdc_ops = {
- .set_voltage = wm8350_dcdc_set_voltage,
- .get_voltage_sel = wm8350_dcdc_get_voltage_sel,
- .list_voltage = wm8350_dcdc_list_voltage,
- .enable = wm8350_dcdc_enable,
- .disable = wm8350_dcdc_disable,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
.get_mode = wm8350_dcdc_get_mode,
.set_mode = wm8350_dcdc_set_mode,
.get_optimum_mode = wm8350_dcdc_get_optimum_mode,
- .is_enabled = wm8350_dcdc_is_enabled,
.set_suspend_voltage = wm8350_dcdc_set_suspend_voltage,
.set_suspend_enable = wm8350_dcdc_set_suspend_enable,
.set_suspend_disable = wm8350_dcdc_set_suspend_disable,
@@ -1240,20 +990,21 @@
};
static struct regulator_ops wm8350_dcdc2_5_ops = {
- .enable = wm8350_dcdc_enable,
- .disable = wm8350_dcdc_disable,
- .is_enabled = wm8350_dcdc_is_enabled,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
.set_suspend_enable = wm8350_dcdc25_set_suspend_enable,
.set_suspend_disable = wm8350_dcdc25_set_suspend_disable,
};
static struct regulator_ops wm8350_ldo_ops = {
- .set_voltage = wm8350_ldo_set_voltage,
- .get_voltage_sel = wm8350_ldo_get_voltage_sel,
+ .map_voltage = wm8350_ldo_map_voltage,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = wm8350_ldo_list_voltage,
- .enable = wm8350_ldo_enable,
- .disable = wm8350_ldo_disable,
- .is_enabled = wm8350_ldo_is_enabled,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
.get_mode = wm8350_ldo_get_mode,
.set_suspend_voltage = wm8350_ldo_set_suspend_voltage,
.set_suspend_enable = wm8350_ldo_set_suspend_enable,
@@ -1277,6 +1028,12 @@
.irq = WM8350_IRQ_UV_DC1,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8350_DCDC_MAX_VSEL + 1,
+ .min_uV = 850000,
+ .uV_step = 25000,
+ .vsel_reg = WM8350_DCDC1_CONTROL,
+ .vsel_mask = WM8350_DC1_VSEL_MASK,
+ .enable_reg = WM8350_DCDC_LDO_REQUESTED,
+ .enable_mask = WM8350_DC1_ENA,
.owner = THIS_MODULE,
},
{
@@ -1285,6 +1042,8 @@
.ops = &wm8350_dcdc2_5_ops,
.irq = WM8350_IRQ_UV_DC2,
.type = REGULATOR_VOLTAGE,
+ .enable_reg = WM8350_DCDC_LDO_REQUESTED,
+ .enable_mask = WM8350_DC2_ENA,
.owner = THIS_MODULE,
},
{
@@ -1294,6 +1053,12 @@
.irq = WM8350_IRQ_UV_DC3,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8350_DCDC_MAX_VSEL + 1,
+ .min_uV = 850000,
+ .uV_step = 25000,
+ .vsel_reg = WM8350_DCDC3_CONTROL,
+ .vsel_mask = WM8350_DC3_VSEL_MASK,
+ .enable_reg = WM8350_DCDC_LDO_REQUESTED,
+ .enable_mask = WM8350_DC3_ENA,
.owner = THIS_MODULE,
},
{
@@ -1303,6 +1068,12 @@
.irq = WM8350_IRQ_UV_DC4,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8350_DCDC_MAX_VSEL + 1,
+ .min_uV = 850000,
+ .uV_step = 25000,
+ .vsel_reg = WM8350_DCDC4_CONTROL,
+ .vsel_mask = WM8350_DC4_VSEL_MASK,
+ .enable_reg = WM8350_DCDC_LDO_REQUESTED,
+ .enable_mask = WM8350_DC4_ENA,
.owner = THIS_MODULE,
},
{
@@ -1311,6 +1082,8 @@
.ops = &wm8350_dcdc2_5_ops,
.irq = WM8350_IRQ_UV_DC5,
.type = REGULATOR_VOLTAGE,
+ .enable_reg = WM8350_DCDC_LDO_REQUESTED,
+ .enable_mask = WM8350_DC5_ENA,
.owner = THIS_MODULE,
},
{
@@ -1320,6 +1093,12 @@
.irq = WM8350_IRQ_UV_DC6,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8350_DCDC_MAX_VSEL + 1,
+ .min_uV = 850000,
+ .uV_step = 25000,
+ .vsel_reg = WM8350_DCDC6_CONTROL,
+ .vsel_mask = WM8350_DC6_VSEL_MASK,
+ .enable_reg = WM8350_DCDC_LDO_REQUESTED,
+ .enable_mask = WM8350_DC6_ENA,
.owner = THIS_MODULE,
},
{
@@ -1329,6 +1108,10 @@
.irq = WM8350_IRQ_UV_LDO1,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8350_LDO1_VSEL_MASK + 1,
+ .vsel_reg = WM8350_LDO1_CONTROL,
+ .vsel_mask = WM8350_LDO1_VSEL_MASK,
+ .enable_reg = WM8350_DCDC_LDO_REQUESTED,
+ .enable_mask = WM8350_LDO1_ENA,
.owner = THIS_MODULE,
},
{
@@ -1338,6 +1121,10 @@
.irq = WM8350_IRQ_UV_LDO2,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8350_LDO2_VSEL_MASK + 1,
+ .vsel_reg = WM8350_LDO2_CONTROL,
+ .vsel_mask = WM8350_LDO2_VSEL_MASK,
+ .enable_reg = WM8350_DCDC_LDO_REQUESTED,
+ .enable_mask = WM8350_LDO2_ENA,
.owner = THIS_MODULE,
},
{
@@ -1347,6 +1134,10 @@
.irq = WM8350_IRQ_UV_LDO3,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8350_LDO3_VSEL_MASK + 1,
+ .vsel_reg = WM8350_LDO3_CONTROL,
+ .vsel_mask = WM8350_LDO3_VSEL_MASK,
+ .enable_reg = WM8350_DCDC_LDO_REQUESTED,
+ .enable_mask = WM8350_LDO3_ENA,
.owner = THIS_MODULE,
},
{
@@ -1356,6 +1147,10 @@
.irq = WM8350_IRQ_UV_LDO4,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8350_LDO4_VSEL_MASK + 1,
+ .vsel_reg = WM8350_LDO4_CONTROL,
+ .vsel_mask = WM8350_LDO4_VSEL_MASK,
+ .enable_reg = WM8350_DCDC_LDO_REQUESTED,
+ .enable_mask = WM8350_LDO4_ENA,
.owner = THIS_MODULE,
},
{
@@ -1429,6 +1224,7 @@
config.dev = &pdev->dev;
config.init_data = pdev->dev.platform_data;
config.driver_data = dev_get_drvdata(&pdev->dev);
+ config.regmap = wm8350->regmap;
/* register regulator */
rdev = regulator_register(&wm8350_reg[pdev->id], &config);
diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c
index 69a2b7c..9035dd0 100644
--- a/drivers/regulator/wm8400-regulator.c
+++ b/drivers/regulator/wm8400-regulator.c
@@ -28,34 +28,26 @@
if (selector < 15)
return 900000 + (selector * 50000);
else
- return 1600000 + ((selector - 14) * 100000);
+ return 1700000 + ((selector - 15) * 100000);
}
static int wm8400_ldo_map_voltage(struct regulator_dev *dev,
int min_uV, int max_uV)
{
u16 val;
+ int volt;
if (min_uV < 900000 || min_uV > 3300000)
return -EINVAL;
- if (min_uV < 1700000) {
- /* Steps of 50mV from 900mV; */
+ if (min_uV < 1700000) /* Steps of 50mV from 900mV; */
val = DIV_ROUND_UP(min_uV - 900000, 50000);
+ else /* Steps of 100mV from 1700mV */
+ val = DIV_ROUND_UP(min_uV - 1700000, 100000) + 15;
- if ((val * 50000) + 900000 > max_uV)
- return -EINVAL;
- BUG_ON((val * 50000) + 900000 < min_uV);
- } else {
- /* Steps of 100mV from 1700mV */
- val = DIV_ROUND_UP(min_uV - 1700000, 100000);
-
- if ((val * 100000) + 1700000 > max_uV)
- return -EINVAL;
- BUG_ON((val * 100000) + 1700000 < min_uV);
-
- val += 0xf;
- }
+ volt = wm8400_ldo_list_voltage(dev, val);
+ if (volt < min_uV || volt > max_uV)
+ return -EINVAL;
return val;
}
@@ -152,6 +144,7 @@
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_mode = wm8400_dcdc_get_mode,
diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c
index 9a99431..86bb48db 100644
--- a/drivers/regulator/wm8994-regulator.c
+++ b/drivers/regulator/wm8994-regulator.c
@@ -26,8 +26,6 @@
#include <linux/mfd/wm8994/pdata.h>
struct wm8994_ldo {
- int enable;
- bool is_enabled;
struct regulator_dev *regulator;
struct wm8994 *wm8994;
};
@@ -35,64 +33,9 @@
#define WM8994_LDO1_MAX_SELECTOR 0x7
#define WM8994_LDO2_MAX_SELECTOR 0x3
-static int wm8994_ldo_enable(struct regulator_dev *rdev)
-{
- struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
-
- /* If we have no soft control assume that the LDO is always enabled. */
- if (!ldo->enable)
- return 0;
-
- gpio_set_value_cansleep(ldo->enable, 1);
- ldo->is_enabled = true;
-
- return 0;
-}
-
-static int wm8994_ldo_disable(struct regulator_dev *rdev)
-{
- struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
-
- /* If we have no soft control assume that the LDO is always enabled. */
- if (!ldo->enable)
- return -EINVAL;
-
- gpio_set_value_cansleep(ldo->enable, 0);
- ldo->is_enabled = false;
-
- return 0;
-}
-
-static int wm8994_ldo_is_enabled(struct regulator_dev *rdev)
-{
- struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
-
- return ldo->is_enabled;
-}
-
-static int wm8994_ldo_enable_time(struct regulator_dev *rdev)
-{
- /* 3ms is fairly conservative but this shouldn't be too performance
- * critical; can be tweaked per-system if required. */
- return 3000;
-}
-
-static int wm8994_ldo1_list_voltage(struct regulator_dev *rdev,
- unsigned int selector)
-{
- if (selector > WM8994_LDO1_MAX_SELECTOR)
- return -EINVAL;
-
- return (selector * 100000) + 2400000;
-}
-
static struct regulator_ops wm8994_ldo1_ops = {
- .enable = wm8994_ldo_enable,
- .disable = wm8994_ldo_disable,
- .is_enabled = wm8994_ldo_is_enabled,
- .enable_time = wm8994_ldo_enable_time,
-
- .list_voltage = wm8994_ldo1_list_voltage,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
};
@@ -124,11 +67,6 @@
}
static struct regulator_ops wm8994_ldo2_ops = {
- .enable = wm8994_ldo_enable,
- .disable = wm8994_ldo_disable,
- .is_enabled = wm8994_ldo_is_enabled,
- .enable_time = wm8994_ldo_enable_time,
-
.list_voltage = wm8994_ldo2_list_voltage,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -143,6 +81,9 @@
.vsel_reg = WM8994_LDO_1,
.vsel_mask = WM8994_LDO1_VSEL_MASK,
.ops = &wm8994_ldo1_ops,
+ .min_uV = 2400000,
+ .uV_step = 100000,
+ .enable_time = 3000,
.owner = THIS_MODULE,
},
{
@@ -153,6 +94,7 @@
.vsel_reg = WM8994_LDO_2,
.vsel_mask = WM8994_LDO2_VSEL_MASK,
.ops = &wm8994_ldo2_ops,
+ .enable_time = 3000,
.owner = THIS_MODULE,
},
};
@@ -176,39 +118,26 @@
ldo->wm8994 = wm8994;
- if (pdata->ldo[id].enable && gpio_is_valid(pdata->ldo[id].enable)) {
- ldo->enable = pdata->ldo[id].enable;
-
- ret = gpio_request_one(ldo->enable, 0, "WM8994 LDO enable");
- if (ret < 0) {
- dev_err(&pdev->dev, "Failed to get enable GPIO: %d\n",
- ret);
- goto err;
- }
- } else
- ldo->is_enabled = true;
-
config.dev = wm8994->dev;
config.driver_data = ldo;
config.regmap = wm8994->regmap;
- if (pdata)
+ if (pdata) {
config.init_data = pdata->ldo[id].init_data;
+ config.ena_gpio = pdata->ldo[id].enable;
+ }
ldo->regulator = regulator_register(&wm8994_ldo_desc[id], &config);
if (IS_ERR(ldo->regulator)) {
ret = PTR_ERR(ldo->regulator);
dev_err(wm8994->dev, "Failed to register LDO%d: %d\n",
id + 1, ret);
- goto err_gpio;
+ goto err;
}
platform_set_drvdata(pdev, ldo);
return 0;
-err_gpio:
- if (gpio_is_valid(ldo->enable))
- gpio_free(ldo->enable);
err:
return ret;
}
@@ -220,8 +149,6 @@
platform_set_drvdata(pdev, NULL);
regulator_unregister(ldo->regulator);
- if (gpio_is_valid(ldo->enable))
- gpio_free(ldo->enable);
return 0;
}
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index 24d880e..f8d818a 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -4,9 +4,11 @@
config REMOTEPROC
tristate
depends on EXPERIMENTAL
+ select FW_CONFIG
config OMAP_REMOTEPROC
tristate "OMAP remoteproc support"
+ depends on EXPERIMENTAL
depends on ARCH_OMAP4
depends on OMAP_IOMMU
select REMOTEPROC
diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
index 69425c4..de138e3 100644
--- a/drivers/remoteproc/omap_remoteproc.c
+++ b/drivers/remoteproc/omap_remoteproc.c
@@ -182,7 +182,7 @@
ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (ret) {
- dev_err(pdev->dev.parent, "dma_set_coherent_mask: %d\n", ret);
+ dev_err(&pdev->dev, "dma_set_coherent_mask: %d\n", ret);
return ret;
}
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 8ea7bcc..66324ee 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -247,7 +247,7 @@
}
if (offset + filesz > len) {
- dev_err(dev, "truncated fw: need 0x%x avail 0x%x\n",
+ dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n",
offset + filesz, len);
ret = -EINVAL;
break;
@@ -934,7 +934,7 @@
unmapped = iommu_unmap(rproc->domain, entry->da, entry->len);
if (unmapped != entry->len) {
/* nothing much to do besides complaining */
- dev_err(dev, "failed to unmap %u/%u\n", entry->len,
+ dev_err(dev, "failed to unmap %u/%zu\n", entry->len,
unmapped);
}
@@ -1020,7 +1020,7 @@
ehdr = (struct elf32_hdr *)fw->data;
- dev_info(dev, "Booting fw image %s, size %d\n", name, fw->size);
+ dev_info(dev, "Booting fw image %s, size %zd\n", name, fw->size);
/*
* if enabling an IOMMU isn't relevant for this rproc, this is
@@ -1041,8 +1041,10 @@
/* look for the resource table */
table = rproc_find_rsc_table(rproc, fw->data, fw->size, &tablesz);
- if (!table)
+ if (!table) {
+ ret = -EINVAL;
goto clean_up;
+ }
/* handle fw resources which are required to boot rproc */
ret = rproc_handle_boot_rsc(rproc, table, tablesz);
diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
index 75506ec..f56c8ba 100644
--- a/drivers/rpmsg/virtio_rpmsg_bus.c
+++ b/drivers/rpmsg/virtio_rpmsg_bus.c
@@ -188,6 +188,26 @@
rpdev->id.name);
}
+/**
+ * __ept_release() - deallocate an rpmsg endpoint
+ * @kref: the ept's reference count
+ *
+ * This function deallocates an ept, and is invoked when its @kref refcount
+ * drops to zero.
+ *
+ * Never invoke this function directly!
+ */
+static void __ept_release(struct kref *kref)
+{
+ struct rpmsg_endpoint *ept = container_of(kref, struct rpmsg_endpoint,
+ refcount);
+ /*
+ * At this point no one holds a reference to ept anymore,
+ * so we can directly free it
+ */
+ kfree(ept);
+}
+
/* for more info, see below documentation of rpmsg_create_ept() */
static struct rpmsg_endpoint *__rpmsg_create_ept(struct virtproc_info *vrp,
struct rpmsg_channel *rpdev, rpmsg_rx_cb_t cb,
@@ -206,6 +226,9 @@
return NULL;
}
+ kref_init(&ept->refcount);
+ mutex_init(&ept->cb_lock);
+
ept->rpdev = rpdev;
ept->cb = cb;
ept->priv = priv;
@@ -238,7 +261,7 @@
idr_remove(&vrp->endpoints, request);
free_ept:
mutex_unlock(&vrp->endpoints_lock);
- kfree(ept);
+ kref_put(&ept->refcount, __ept_release);
return NULL;
}
@@ -302,11 +325,17 @@
static void
__rpmsg_destroy_ept(struct virtproc_info *vrp, struct rpmsg_endpoint *ept)
{
+ /* make sure new inbound messages can't find this ept anymore */
mutex_lock(&vrp->endpoints_lock);
idr_remove(&vrp->endpoints, ept->addr);
mutex_unlock(&vrp->endpoints_lock);
- kfree(ept);
+ /* make sure in-flight inbound messages won't invoke cb anymore */
+ mutex_lock(&ept->cb_lock);
+ ept->cb = NULL;
+ mutex_unlock(&ept->cb_lock);
+
+ kref_put(&ept->refcount, __ept_release);
}
/**
@@ -790,12 +819,28 @@
/* use the dst addr to fetch the callback of the appropriate user */
mutex_lock(&vrp->endpoints_lock);
+
ept = idr_find(&vrp->endpoints, msg->dst);
+
+ /* let's make sure no one deallocates ept while we use it */
+ if (ept)
+ kref_get(&ept->refcount);
+
mutex_unlock(&vrp->endpoints_lock);
- if (ept && ept->cb)
- ept->cb(ept->rpdev, msg->data, msg->len, ept->priv, msg->src);
- else
+ if (ept) {
+ /* make sure ept->cb doesn't go away while we use it */
+ mutex_lock(&ept->cb_lock);
+
+ if (ept->cb)
+ ept->cb(ept->rpdev, msg->data, msg->len, ept->priv,
+ msg->src);
+
+ mutex_unlock(&ept->cb_lock);
+
+ /* farewell, ept, we don't need you anymore */
+ kref_put(&ept->refcount, __ept_release);
+ } else
dev_warn(dev, "msg received with no recepient\n");
/* publish the real size of the buffer */
@@ -1040,7 +1085,7 @@
return ret;
}
-module_init(rpmsg_init);
+subsys_initcall(rpmsg_init);
static void __exit rpmsg_fini(void)
{
diff --git a/drivers/rtc/rtc-ab8500.c b/drivers/rtc/rtc-ab8500.c
index 4bcf9ca..370889d 100644
--- a/drivers/rtc/rtc-ab8500.c
+++ b/drivers/rtc/rtc-ab8500.c
@@ -17,6 +17,7 @@
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/delay.h>
+#include <linux/of.h>
#define AB8500_RTC_SOFF_STAT_REG 0x00
#define AB8500_RTC_CC_CONF_REG 0x01
@@ -422,7 +423,7 @@
}
err = request_threaded_irq(irq, NULL, rtc_alarm_handler,
- IRQF_NO_SUSPEND, "ab8500-rtc", rtc);
+ IRQF_NO_SUSPEND | IRQF_ONESHOT, "ab8500-rtc", rtc);
if (err < 0) {
rtc_device_unregister(rtc);
return err;
@@ -430,7 +431,6 @@
platform_set_drvdata(pdev, rtc);
-
err = ab8500_sysfs_rtc_register(&pdev->dev);
if (err) {
dev_err(&pdev->dev, "sysfs RTC failed to register\n");
@@ -454,10 +454,16 @@
return 0;
}
+static const struct of_device_id ab8500_rtc_match[] = {
+ { .compatible = "stericsson,ab8500-rtc", },
+ {}
+};
+
static struct platform_driver ab8500_rtc_driver = {
.driver = {
.name = "ab8500-rtc",
.owner = THIS_MODULE,
+ .of_match_table = ab8500_rtc_match,
},
.probe = ab8500_rtc_probe,
.remove = __devexit_p(ab8500_rtc_remove),
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index dc474bc..fca9790 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -27,6 +27,7 @@
#include <linux/interrupt.h>
#include <linux/ioctl.h>
#include <linux/completion.h>
+#include <linux/io.h>
#include <asm/uaccess.h>
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 4267789..132333d 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -568,6 +568,7 @@
hpet_mask_rtc_irq_bit(RTC_AIE);
CMOS_READ(RTC_INTR_FLAGS);
+ pm_wakeup_event(cmos_rtc.dev, 0);
}
spin_unlock(&rtc_lock);
diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
index 5e1d64e..e3e50d6 100644
--- a/drivers/rtc/rtc-mxc.c
+++ b/drivers/rtc/rtc-mxc.c
@@ -202,10 +202,11 @@
struct platform_device *pdev = dev_id;
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
void __iomem *ioaddr = pdata->ioaddr;
+ unsigned long flags;
u32 status;
u32 events = 0;
- spin_lock_irq(&pdata->rtc->irq_lock);
+ spin_lock_irqsave(&pdata->rtc->irq_lock, flags);
status = readw(ioaddr + RTC_RTCISR) & readw(ioaddr + RTC_RTCIENR);
/* clear interrupt sources */
writew(status, ioaddr + RTC_RTCISR);
@@ -224,7 +225,7 @@
events |= (RTC_PF | RTC_IRQF);
rtc_update_irq(pdata->rtc, 1, events);
- spin_unlock_irq(&pdata->rtc->irq_lock);
+ spin_unlock_irqrestore(&pdata->rtc->irq_lock, flags);
return IRQ_HANDLED;
}
diff --git a/drivers/rtc/rtc-spear.c b/drivers/rtc/rtc-spear.c
index 1f76320..e278547 100644
--- a/drivers/rtc/rtc-spear.c
+++ b/drivers/rtc/rtc-spear.c
@@ -458,12 +458,12 @@
clk_disable(config->clk);
clk_put(config->clk);
iounmap(config->ioaddr);
- kfree(config);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res)
release_mem_region(res->start, resource_size(res));
platform_set_drvdata(pdev, NULL);
rtc_device_unregister(config->rtc);
+ kfree(config);
return 0;
}
diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
index 1028786..739ef556 100644
--- a/drivers/rtc/rtc-stmp3xxx.c
+++ b/drivers/rtc/rtc-stmp3xxx.c
@@ -25,6 +25,7 @@
#include <linux/interrupt.h>
#include <linux/rtc.h>
#include <linux/slab.h>
+#include <linux/of_device.h>
#include <mach/common.h>
@@ -265,6 +266,12 @@
#define stmp3xxx_rtc_resume NULL
#endif
+static const struct of_device_id rtc_dt_ids[] = {
+ { .compatible = "fsl,stmp3xxx-rtc", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rtc_dt_ids);
+
static struct platform_driver stmp3xxx_rtcdrv = {
.probe = stmp3xxx_rtc_probe,
.remove = stmp3xxx_rtc_remove,
@@ -273,6 +280,7 @@
.driver = {
.name = "stmp3xxx-rtc",
.owner = THIS_MODULE,
+ .of_match_table = rtc_dt_ids,
},
};
diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c
index 258abea..c5d06fe 100644
--- a/drivers/rtc/rtc-twl.c
+++ b/drivers/rtc/rtc-twl.c
@@ -510,7 +510,7 @@
}
ret = request_threaded_irq(irq, NULL, twl_rtc_interrupt,
- IRQF_TRIGGER_RISING,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
dev_name(&rtc->dev), rtc);
if (ret < 0) {
dev_err(&pdev->dev, "IRQ is not free.\n");
diff --git a/drivers/scsi/aic94xx/aic94xx_task.c b/drivers/scsi/aic94xx/aic94xx_task.c
index 532d212..393e7ce 100644
--- a/drivers/scsi/aic94xx/aic94xx_task.c
+++ b/drivers/scsi/aic94xx/aic94xx_task.c
@@ -201,7 +201,7 @@
if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
resp->frame_len = le16_to_cpu(*(__le16 *)(r+6));
- memcpy(&resp->ending_fis[0], r+16, 24);
+ memcpy(&resp->ending_fis[0], r+16, ATA_RESP_FIS_SIZE);
ts->buf_valid_size = sizeof(*resp);
}
}
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index 0c53c28..7e77cf6 100644
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -350,6 +350,7 @@
struct pci_dev *pcidev;
struct net_device *netdev;
void __iomem *regview;
+ resource_size_t reg_base;
u32 age;
unsigned long cnic_dev_type;
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index ece47e5..86a12b4 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -2724,7 +2724,6 @@
goto arm_cq;
}
- reg_base = ep->hba->netdev->base_addr;
if ((test_bit(BNX2I_NX2_DEV_5709, &ep->hba->cnic_dev_type)) &&
(ep->hba->mail_queue_access == BNX2I_MQ_BIN_MODE)) {
config2 = REG_RD(ep->hba, BNX2_MQ_CONFIG2);
@@ -2740,7 +2739,7 @@
/* 5709 device in normal node and 5706/5708 devices */
reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
- ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off,
+ ep->qp.ctx_base = ioremap_nocache(ep->hba->reg_base + reg_off,
MB_KERNEL_CTX_SIZE);
if (!ep->qp.ctx_base)
return -ENOMEM;
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index f8d516b..621538b 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -811,13 +811,13 @@
bnx2i_identify_device(hba);
bnx2i_setup_host_queue_size(hba, shost);
+ hba->reg_base = pci_resource_start(hba->pcidev, 0);
if (test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type)) {
- hba->regview = ioremap_nocache(hba->netdev->base_addr,
- BNX2_MQ_CONFIG2);
+ hba->regview = pci_iomap(hba->pcidev, 0, BNX2_MQ_CONFIG2);
if (!hba->regview)
goto ioreg_map_err;
} else if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
- hba->regview = ioremap_nocache(hba->netdev->base_addr, 4096);
+ hba->regview = pci_iomap(hba->pcidev, 0, 4096);
if (!hba->regview)
goto ioreg_map_err;
}
@@ -884,7 +884,7 @@
bnx2i_free_mp_bdt(hba);
mp_bdt_mem_err:
if (hba->regview) {
- iounmap(hba->regview);
+ pci_iounmap(hba->pcidev, hba->regview);
hba->regview = NULL;
}
ioreg_map_err:
@@ -910,7 +910,7 @@
pci_dev_put(hba->pcidev);
if (hba->regview) {
- iounmap(hba->regview);
+ pci_iounmap(hba->pcidev, hba->regview);
hba->regview = NULL;
}
bnx2i_free_mp_bdt(hba);
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 441d88a..d109cc3 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -139,12 +139,12 @@
if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD ||
((stat->stat == SAM_STAT_CHECK_CONDITION &&
dev->sata_dev.command_set == ATAPI_COMMAND_SET))) {
- ata_tf_from_fis(resp->ending_fis, &dev->sata_dev.tf);
+ memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE);
if (!link->sactive) {
- qc->err_mask |= ac_err_mask(dev->sata_dev.tf.command);
+ qc->err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
} else {
- link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.tf.command);
+ link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
if (unlikely(link->eh_info.err_mask))
qc->flags |= ATA_QCFLAG_FAILED;
}
@@ -161,8 +161,8 @@
qc->flags |= ATA_QCFLAG_FAILED;
}
- dev->sata_dev.tf.feature = 0x04; /* status err */
- dev->sata_dev.tf.command = ATA_ERR;
+ dev->sata_dev.fis[3] = 0x04; /* status err */
+ dev->sata_dev.fis[2] = ATA_ERR;
}
}
@@ -269,7 +269,7 @@
{
struct domain_device *dev = qc->ap->private_data;
- memcpy(&qc->result_tf, &dev->sata_dev.tf, sizeof(qc->result_tf));
+ ata_tf_from_fis(dev->sata_dev.fis, &qc->result_tf);
return true;
}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 6102ef2..9d46fcb 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -1792,7 +1792,7 @@
static inline u8
_base_get_msix_index(struct MPT2SAS_ADAPTER *ioc)
{
- return ioc->cpu_msix_table[smp_processor_id()];
+ return ioc->cpu_msix_table[raw_smp_processor_id()];
}
/**
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 04f80eb..5b30132 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -26,7 +26,6 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/version.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
@@ -2477,11 +2476,9 @@
}
cmd = qlt_ctio_to_cmd(vha, handle, ctio);
- if (cmd == NULL) {
- if (status != CTIO_SUCCESS)
- qlt_term_ctio_exchange(vha, ctio, NULL, status);
+ if (cmd == NULL)
return;
- }
+
se_cmd = &cmd->se_cmd;
tfo = se_cmd->se_tfo;
@@ -2646,19 +2643,9 @@
spin_lock_irqsave(&ha->hardware_lock, flags);
sess = ha->tgt.tgt_ops->find_sess_by_s_id(vha,
atio->u.isp24.fcp_hdr.s_id);
- if (sess) {
- if (unlikely(sess->tearing_down)) {
- sess = NULL;
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
- goto out_term;
- } else {
- /*
- * Do the extra kref_get() before dropping
- * qla_hw_data->hardware_lock.
- */
- kref_get(&sess->se_sess->sess_kref);
- }
- }
+ /* Do kref_get() before dropping qla_hw_data->hardware_lock. */
+ if (sess)
+ kref_get(&sess->se_sess->sess_kref);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (unlikely(!sess)) {
@@ -2727,10 +2714,12 @@
out_term:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf020, "Terminating work cmd %p", cmd);
/*
- * cmd has not sent to target yet, so pass NULL as the second argument
+ * cmd has not sent to target yet, so pass NULL as the second
+ * argument to qlt_send_term_exchange() and free the memory here.
*/
spin_lock_irqsave(&ha->hardware_lock, flags);
qlt_send_term_exchange(vha, NULL, &cmd->atio, 1);
+ kmem_cache_free(qla_tgt_cmd_cachep, cmd);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (sess)
ha->tgt.tgt_ops->put_sess(sess);
@@ -3961,7 +3950,7 @@
{
struct qla_hw_data *ha = vha->hw;
struct qla_tgt *tgt = ha->tgt.qla_tgt;
- int reason_code;
+ int login_code;
ql_dbg(ql_dbg_tgt, vha, 0xe039,
"scsi(%ld): ha state %d init_done %d oper_mode %d topo %d\n",
@@ -4004,9 +3993,9 @@
{
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03b,
"qla_target(%d): Async LOOP_UP occured "
- "(m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx,
- le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
- le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
+ "(m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx,
+ le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+ le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
if (tgt->link_reinit_iocb_pending) {
qlt_send_notify_ack(vha, (void *)&tgt->link_reinit_iocb,
0, 0, 0, 0, 0, 0);
@@ -4021,23 +4010,24 @@
case MBA_RSCN_UPDATE:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03c,
"qla_target(%d): Async event %#x occured "
- "(m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx, code,
- le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
- le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
+ "(m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx, code,
+ le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+ le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
break;
case MBA_PORT_UPDATE:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03d,
"qla_target(%d): Port update async event %#x "
- "occured: updating the ports database (m[1]=%x, m[2]=%x, "
- "m[3]=%x, m[4]=%x)", vha->vp_idx, code,
- le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
- le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
- reason_code = le16_to_cpu(mailbox[2]);
- if (reason_code == 0x4)
+ "occured: updating the ports database (m[0]=%x, m[1]=%x, "
+ "m[2]=%x, m[3]=%x)", vha->vp_idx, code,
+ le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+ le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
+
+ login_code = le16_to_cpu(mailbox[2]);
+ if (login_code == 0x4)
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03e,
"Async MB 2: Got PLOGI Complete\n");
- else if (reason_code == 0x7)
+ else if (login_code == 0x7)
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03f,
"Async MB 2: Port Logged Out\n");
break;
@@ -4045,9 +4035,9 @@
default:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf040,
"qla_target(%d): Async event %#x occured: "
- "ignore (m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx,
- code, le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
- le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
+ "ignore (m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx,
+ code, le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+ le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
break;
}
diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h
index 9ec19bc..170af15 100644
--- a/drivers/scsi/qla2xxx/qla_target.h
+++ b/drivers/scsi/qla2xxx/qla_target.h
@@ -639,7 +639,7 @@
int (*handle_cmd)(struct scsi_qla_host *, struct qla_tgt_cmd *,
unsigned char *, uint32_t, int, int, int);
- int (*handle_data)(struct qla_tgt_cmd *);
+ void (*handle_data)(struct qla_tgt_cmd *);
int (*handle_tmr)(struct qla_tgt_mgmt_cmd *, uint32_t, uint8_t,
uint32_t);
void (*free_cmd)(struct qla_tgt_cmd *);
@@ -813,7 +813,6 @@
unsigned int conf_compl_supported:1;
unsigned int deleted:1;
unsigned int local:1;
- unsigned int tearing_down:1;
struct se_session *se_sess;
struct scsi_qla_host *vha;
@@ -919,7 +918,6 @@
#define QLA_TGT_XMIT_STATUS 2
#define QLA_TGT_XMIT_ALL (QLA_TGT_XMIT_STATUS|QLA_TGT_XMIT_DATA)
-#include <linux/version.h>
extern struct qla_tgt_data qla_target;
/*
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index 436598f..4752f65 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -38,8 +38,6 @@
#include <linux/string.h>
#include <linux/configfs.h>
#include <linux/ctype.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
@@ -137,13 +135,15 @@
*/
static int tcm_qla2xxx_npiv_extract_wwn(const char *ns, u64 *nm)
{
- unsigned int i, j, value;
+ unsigned int i, j;
u8 wwn[8];
memset(wwn, 0, sizeof(wwn));
/* Validate and store the new name */
for (i = 0, j = 0; i < 16; i++) {
+ int value;
+
value = hex_to_bin(*ns++);
if (value >= 0)
j = (j << 4) | value;
@@ -464,8 +464,7 @@
vha = sess->vha;
spin_lock_irqsave(&vha->hw->hardware_lock, flags);
- sess->tearing_down = 1;
- target_splice_sess_cmd_list(se_sess);
+ target_sess_cmd_list_set_waiting(se_sess);
spin_unlock_irqrestore(&vha->hw->hardware_lock, flags);
return 1;
@@ -598,28 +597,15 @@
return -EINVAL;
}
- target_submit_cmd(se_cmd, se_sess, cdb, &cmd->sense_buffer[0],
+ return target_submit_cmd(se_cmd, se_sess, cdb, &cmd->sense_buffer[0],
cmd->unpacked_lun, data_length, fcp_task_attr,
data_dir, flags);
- return 0;
}
-static void tcm_qla2xxx_do_rsp(struct work_struct *work)
+static void tcm_qla2xxx_handle_data_work(struct work_struct *work)
{
struct qla_tgt_cmd *cmd = container_of(work, struct qla_tgt_cmd, work);
- /*
- * Dispatch ->queue_status from workqueue process context
- */
- transport_generic_request_failure(&cmd->se_cmd);
-}
-/*
- * Called from qla_target.c:qlt_do_ctio_completion()
- */
-static int tcm_qla2xxx_handle_data(struct qla_tgt_cmd *cmd)
-{
- struct se_cmd *se_cmd = &cmd->se_cmd;
- unsigned long flags;
/*
* Ensure that the complete FCP WRITE payload has been received.
* Otherwise return an exception via CHECK_CONDITION status.
@@ -629,31 +615,33 @@
* Check if se_cmd has already been aborted via LUN_RESET, and
* waiting upon completion in tcm_qla2xxx_write_pending_status()
*/
- spin_lock_irqsave(&se_cmd->t_state_lock, flags);
- if (se_cmd->transport_state & CMD_T_ABORTED) {
- spin_unlock_irqrestore(&se_cmd->t_state_lock, flags);
- complete(&se_cmd->t_transport_stop_comp);
- return 0;
+ if (cmd->se_cmd.transport_state & CMD_T_ABORTED) {
+ complete(&cmd->se_cmd.t_transport_stop_comp);
+ return;
}
- spin_unlock_irqrestore(&se_cmd->t_state_lock, flags);
- se_cmd->scsi_sense_reason = TCM_CHECK_CONDITION_ABORT_CMD;
- INIT_WORK(&cmd->work, tcm_qla2xxx_do_rsp);
- queue_work(tcm_qla2xxx_free_wq, &cmd->work);
- return 0;
+ cmd->se_cmd.scsi_sense_reason = TCM_CHECK_CONDITION_ABORT_CMD;
+ transport_generic_request_failure(&cmd->se_cmd);
+ return;
}
- /*
- * We now tell TCM to queue this WRITE CDB with TRANSPORT_PROCESS_WRITE
- * status to the backstore processing thread.
- */
- return transport_generic_handle_data(&cmd->se_cmd);
+
+ return target_execute_cmd(&cmd->se_cmd);
+}
+
+/*
+ * Called from qla_target.c:qlt_do_ctio_completion()
+ */
+static void tcm_qla2xxx_handle_data(struct qla_tgt_cmd *cmd)
+{
+ INIT_WORK(&cmd->work, tcm_qla2xxx_handle_data_work);
+ queue_work(tcm_qla2xxx_free_wq, &cmd->work);
}
/*
* Called from qla_target.c:qlt_issue_task_mgmt()
*/
-int tcm_qla2xxx_handle_tmr(struct qla_tgt_mgmt_cmd *mcmd, uint32_t lun,
- uint8_t tmr_func, uint32_t tag)
+static int tcm_qla2xxx_handle_tmr(struct qla_tgt_mgmt_cmd *mcmd, uint32_t lun,
+ uint8_t tmr_func, uint32_t tag)
{
struct qla_tgt_sess *sess = mcmd->sess;
struct se_cmd *se_cmd = &mcmd->se_cmd;
@@ -762,65 +750,8 @@
struct target_fabric_configfs *tcm_qla2xxx_fabric_configfs;
struct target_fabric_configfs *tcm_qla2xxx_npiv_fabric_configfs;
-static int tcm_qla2xxx_setup_nacl_from_rport(
- struct se_portal_group *se_tpg,
- struct se_node_acl *se_nacl,
- struct tcm_qla2xxx_lport *lport,
- struct tcm_qla2xxx_nacl *nacl,
- u64 rport_wwnn)
-{
- struct scsi_qla_host *vha = lport->qla_vha;
- struct Scsi_Host *sh = vha->host;
- struct fc_host_attrs *fc_host = shost_to_fc_host(sh);
- struct fc_rport *rport;
- unsigned long flags;
- void *node;
- int rc;
-
- /*
- * Scan the existing rports, and create a session for the
- * explict NodeACL is an matching rport->node_name already
- * exists.
- */
- spin_lock_irqsave(sh->host_lock, flags);
- list_for_each_entry(rport, &fc_host->rports, peers) {
- if (rport_wwnn != rport->node_name)
- continue;
-
- pr_debug("Located existing rport_wwpn and rport->node_name: 0x%016LX, port_id: 0x%04x\n",
- rport->node_name, rport->port_id);
- nacl->nport_id = rport->port_id;
-
- spin_unlock_irqrestore(sh->host_lock, flags);
-
- spin_lock_irqsave(&vha->hw->hardware_lock, flags);
- node = btree_lookup32(&lport->lport_fcport_map, rport->port_id);
- if (node) {
- rc = btree_update32(&lport->lport_fcport_map,
- rport->port_id, se_nacl);
- } else {
- rc = btree_insert32(&lport->lport_fcport_map,
- rport->port_id, se_nacl,
- GFP_ATOMIC);
- }
- spin_unlock_irqrestore(&vha->hw->hardware_lock, flags);
-
- if (rc) {
- pr_err("Unable to insert se_nacl into fcport_map");
- WARN_ON(rc > 0);
- return rc;
- }
-
- pr_debug("Inserted into fcport_map: %p for WWNN: 0x%016LX, port_id: 0x%08x\n",
- se_nacl, rport_wwnn, nacl->nport_id);
-
- return 1;
- }
- spin_unlock_irqrestore(sh->host_lock, flags);
-
- return 0;
-}
-
+static void tcm_qla2xxx_clear_sess_lookup(struct tcm_qla2xxx_lport *,
+ struct tcm_qla2xxx_nacl *, struct qla_tgt_sess *);
/*
* Expected to be called with struct qla_hw_data->hardware_lock held
*/
@@ -842,11 +773,40 @@
pr_debug("Removed from fcport_map: %p for WWNN: 0x%016LX, port_id: 0x%06x\n",
se_nacl, nacl->nport_wwnn, nacl->nport_id);
+ /*
+ * Now clear the se_nacl and session pointers from our HW lport lookup
+ * table mapping for this initiator's fabric S_ID and LOOP_ID entries.
+ *
+ * This is done ahead of callbacks into tcm_qla2xxx_free_session() ->
+ * target_wait_for_sess_cmds() before the session waits for outstanding
+ * I/O to complete, to avoid a race between session shutdown execution
+ * and incoming ATIOs or TMRs picking up a stale se_node_act reference.
+ */
+ tcm_qla2xxx_clear_sess_lookup(lport, nacl, sess);
+}
+
+static void tcm_qla2xxx_release_session(struct kref *kref)
+{
+ struct se_session *se_sess = container_of(kref,
+ struct se_session, sess_kref);
+
+ qlt_unreg_sess(se_sess->fabric_sess_ptr);
+}
+
+static void tcm_qla2xxx_put_session(struct se_session *se_sess)
+{
+ struct qla_tgt_sess *sess = se_sess->fabric_sess_ptr;
+ struct qla_hw_data *ha = sess->vha->hw;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ kref_put(&se_sess->sess_kref, tcm_qla2xxx_release_session);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
static void tcm_qla2xxx_put_sess(struct qla_tgt_sess *sess)
{
- target_put_session(sess->se_sess);
+ tcm_qla2xxx_put_session(sess->se_sess);
}
static void tcm_qla2xxx_shutdown_sess(struct qla_tgt_sess *sess)
@@ -859,14 +819,10 @@
struct config_group *group,
const char *name)
{
- struct se_wwn *se_wwn = se_tpg->se_tpg_wwn;
- struct tcm_qla2xxx_lport *lport = container_of(se_wwn,
- struct tcm_qla2xxx_lport, lport_wwn);
struct se_node_acl *se_nacl, *se_nacl_new;
struct tcm_qla2xxx_nacl *nacl;
u64 wwnn;
u32 qla2xxx_nexus_depth;
- int rc;
if (tcm_qla2xxx_parse_wwn(name, &wwnn, 1) < 0)
return ERR_PTR(-EINVAL);
@@ -893,16 +849,6 @@
nacl = container_of(se_nacl, struct tcm_qla2xxx_nacl, se_node_acl);
nacl->nport_wwnn = wwnn;
tcm_qla2xxx_format_wwn(&nacl->nport_name[0], TCM_QLA2XXX_NAMELEN, wwnn);
- /*
- * Setup a se_nacl handle based on an a matching struct fc_rport setup
- * via drivers/scsi/qla2xxx/qla_init.c:qla2x00_reg_remote_port()
- */
- rc = tcm_qla2xxx_setup_nacl_from_rport(se_tpg, se_nacl, lport,
- nacl, wwnn);
- if (rc < 0) {
- tcm_qla2xxx_release_fabric_acl(se_tpg, se_nacl_new);
- return ERR_PTR(rc);
- }
return se_nacl;
}
@@ -1390,6 +1336,25 @@
nacl->qla_tgt_sess, new_se_nacl, new_se_nacl->initiatorname);
}
+/*
+ * Should always be called with qla_hw_data->hardware_lock held.
+ */
+static void tcm_qla2xxx_clear_sess_lookup(struct tcm_qla2xxx_lport *lport,
+ struct tcm_qla2xxx_nacl *nacl, struct qla_tgt_sess *sess)
+{
+ struct se_session *se_sess = sess->se_sess;
+ unsigned char be_sid[3];
+
+ be_sid[0] = sess->s_id.b.domain;
+ be_sid[1] = sess->s_id.b.area;
+ be_sid[2] = sess->s_id.b.al_pa;
+
+ tcm_qla2xxx_set_sess_by_s_id(lport, NULL, nacl, se_sess,
+ sess, be_sid);
+ tcm_qla2xxx_set_sess_by_loop_id(lport, NULL, nacl, se_sess,
+ sess, sess->loop_id);
+}
+
static void tcm_qla2xxx_free_session(struct qla_tgt_sess *sess)
{
struct qla_tgt *tgt = sess->tgt;
@@ -1398,8 +1363,6 @@
struct se_node_acl *se_nacl;
struct tcm_qla2xxx_lport *lport;
struct tcm_qla2xxx_nacl *nacl;
- unsigned char be_sid[3];
- unsigned long flags;
BUG_ON(in_interrupt());
@@ -1419,21 +1382,6 @@
return;
}
target_wait_for_sess_cmds(se_sess, 0);
- /*
- * And now clear the se_nacl and session pointers from our HW lport
- * mappings for fabric S_ID and LOOP_ID.
- */
- memset(&be_sid, 0, 3);
- be_sid[0] = sess->s_id.b.domain;
- be_sid[1] = sess->s_id.b.area;
- be_sid[2] = sess->s_id.b.al_pa;
-
- spin_lock_irqsave(&ha->hardware_lock, flags);
- tcm_qla2xxx_set_sess_by_s_id(lport, NULL, nacl, se_sess,
- sess, be_sid);
- tcm_qla2xxx_set_sess_by_loop_id(lport, NULL, nacl, se_sess,
- sess, sess->loop_id);
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
transport_deregister_session_configfs(sess->se_sess);
transport_deregister_session(sess->se_sess);
@@ -1728,9 +1676,9 @@
.tpg_alloc_fabric_acl = tcm_qla2xxx_alloc_fabric_acl,
.tpg_release_fabric_acl = tcm_qla2xxx_release_fabric_acl,
.tpg_get_inst_index = tcm_qla2xxx_tpg_get_inst_index,
- .new_cmd_map = NULL,
.check_stop_free = tcm_qla2xxx_check_stop_free,
.release_cmd = tcm_qla2xxx_release_cmd,
+ .put_session = tcm_qla2xxx_put_session,
.shutdown_session = tcm_qla2xxx_shutdown_session,
.close_session = tcm_qla2xxx_close_session,
.sess_get_index = tcm_qla2xxx_sess_get_index,
@@ -1779,6 +1727,7 @@
.tpg_release_fabric_acl = tcm_qla2xxx_release_fabric_acl,
.tpg_get_inst_index = tcm_qla2xxx_tpg_get_inst_index,
.release_cmd = tcm_qla2xxx_release_cmd,
+ .put_session = tcm_qla2xxx_put_session,
.shutdown_session = tcm_qla2xxx_shutdown_session,
.close_session = tcm_qla2xxx_close_session,
.sess_get_index = tcm_qla2xxx_sess_get_index,
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 61c82a3..bbbc9c91 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -90,11 +90,9 @@
EXPORT_SYMBOL(scsi_logging_level);
#endif
-#if IS_ENABLED(CONFIG_PM) || IS_ENABLED(CONFIG_BLK_DEV_SD)
-/* sd and scsi_pm need to coordinate flushing async actions */
+/* sd, scsi core and power management need to coordinate flushing async actions */
LIST_HEAD(scsi_sd_probe_domain);
EXPORT_SYMBOL(scsi_sd_probe_domain);
-#endif
/* NB: These are exposed through /proc/scsi/scsi and form part of the ABI.
* You may not alter any existing entry (although adding new ones is
diff --git a/drivers/scsi/scsi_wait_scan.c b/drivers/scsi/scsi_wait_scan.c
index ae78148..0727345 100644
--- a/drivers/scsi/scsi_wait_scan.c
+++ b/drivers/scsi/scsi_wait_scan.c
@@ -22,11 +22,6 @@
* and might not yet have reached the scsi async scanning
*/
wait_for_device_probe();
- /*
- * and then we wait for the actual asynchronous scsi scan
- * to finish.
- */
- scsi_complete_async_scans();
return 0;
}
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 6f0a4c6..6f72b80 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1899,6 +1899,8 @@
{
if (sdp->host->max_cmd_len < 16)
return 0;
+ if (sdp->try_rc_10_first)
+ return 0;
if (sdp->scsi_level > SCSI_SPC_2)
return 1;
if (scsi_device_protection(sdp))
diff --git a/drivers/sh/Kconfig b/drivers/sh/Kconfig
index f168a61..d860ef7 100644
--- a/drivers/sh/Kconfig
+++ b/drivers/sh/Kconfig
@@ -1,5 +1,6 @@
menu "SuperH / SH-Mobile Driver Options"
source "drivers/sh/intc/Kconfig"
+source "drivers/sh/pfc/Kconfig"
endmenu
diff --git a/drivers/sh/Makefile b/drivers/sh/Makefile
index 7139ad2..e57895b 100644
--- a/drivers/sh/Makefile
+++ b/drivers/sh/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_HAVE_CLK) += clk/
obj-$(CONFIG_MAPLE) += maple/
+obj-$(CONFIG_SH_PFC) += pfc/
obj-$(CONFIG_SUPERHYWAY) += superhyway/
-obj-$(CONFIG_GENERIC_GPIO) += pfc.o
+
obj-y += pm_runtime.o
diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
index f0d015d..07e9fb4 100644
--- a/drivers/sh/clk/cpg.c
+++ b/drivers/sh/clk/cpg.c
@@ -14,6 +14,8 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
+#define CPG_CKSTP_BIT BIT(8)
+
static unsigned int sh_clk_read(struct clk *clk)
{
if (clk->flags & CLK_ENABLE_REG_8BIT)
@@ -66,71 +68,43 @@
return ret;
}
+/*
+ * Div/mult table lookup helpers
+ */
+static inline struct clk_div_table *clk_to_div_table(struct clk *clk)
+{
+ return clk->priv;
+}
+
+static inline struct clk_div_mult_table *clk_to_div_mult_table(struct clk *clk)
+{
+ return clk_to_div_table(clk)->div_mult_table;
+}
+
+/*
+ * Common div ops
+ */
static long sh_clk_div_round_rate(struct clk *clk, unsigned long rate)
{
return clk_rate_table_round(clk, clk->freq_table, rate);
}
-static int sh_clk_div6_divisors[64] = {
- 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
- 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32,
- 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48,
- 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64
-};
-
-static struct clk_div_mult_table sh_clk_div6_table = {
- .divisors = sh_clk_div6_divisors,
- .nr_divisors = ARRAY_SIZE(sh_clk_div6_divisors),
-};
-
-static unsigned long sh_clk_div6_recalc(struct clk *clk)
+static unsigned long sh_clk_div_recalc(struct clk *clk)
{
- struct clk_div_mult_table *table = &sh_clk_div6_table;
+ struct clk_div_mult_table *table = clk_to_div_mult_table(clk);
unsigned int idx;
clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
- table, NULL);
+ table, clk->arch_flags ? &clk->arch_flags : NULL);
- idx = sh_clk_read(clk) & 0x003f;
+ idx = (sh_clk_read(clk) >> clk->enable_bit) & clk->div_mask;
return clk->freq_table[idx].frequency;
}
-static int sh_clk_div6_set_parent(struct clk *clk, struct clk *parent)
+static int sh_clk_div_set_rate(struct clk *clk, unsigned long rate)
{
- struct clk_div_mult_table *table = &sh_clk_div6_table;
- u32 value;
- int ret, i;
-
- if (!clk->parent_table || !clk->parent_num)
- return -EINVAL;
-
- /* Search the parent */
- for (i = 0; i < clk->parent_num; i++)
- if (clk->parent_table[i] == parent)
- break;
-
- if (i == clk->parent_num)
- return -ENODEV;
-
- ret = clk_reparent(clk, parent);
- if (ret < 0)
- return ret;
-
- value = sh_clk_read(clk) &
- ~(((1 << clk->src_width) - 1) << clk->src_shift);
-
- sh_clk_write(value | (i << clk->src_shift), clk);
-
- /* Rebuild the frequency table */
- clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
- table, NULL);
-
- return 0;
-}
-
-static int sh_clk_div6_set_rate(struct clk *clk, unsigned long rate)
-{
+ struct clk_div_table *dt = clk_to_div_table(clk);
unsigned long value;
int idx;
@@ -139,51 +113,53 @@
return idx;
value = sh_clk_read(clk);
- value &= ~0x3f;
- value |= idx;
+ value &= ~(clk->div_mask << clk->enable_bit);
+ value |= (idx << clk->enable_bit);
sh_clk_write(value, clk);
+
+ /* XXX: Should use a post-change notifier */
+ if (dt->kick)
+ dt->kick(clk);
+
return 0;
}
-static int sh_clk_div6_enable(struct clk *clk)
+static int sh_clk_div_enable(struct clk *clk)
{
- unsigned long value;
- int ret;
-
- ret = sh_clk_div6_set_rate(clk, clk->rate);
- if (ret == 0) {
- value = sh_clk_read(clk);
- value &= ~0x100; /* clear stop bit to enable clock */
- sh_clk_write(value, clk);
- }
- return ret;
+ sh_clk_write(sh_clk_read(clk) & ~CPG_CKSTP_BIT, clk);
+ return 0;
}
-static void sh_clk_div6_disable(struct clk *clk)
+static void sh_clk_div_disable(struct clk *clk)
{
- unsigned long value;
+ unsigned int val;
- value = sh_clk_read(clk);
- value |= 0x100; /* stop clock */
- value |= 0x3f; /* VDIV bits must be non-zero, overwrite divider */
- sh_clk_write(value, clk);
+ val = sh_clk_read(clk);
+ val |= CPG_CKSTP_BIT;
+
+ /*
+ * div6 clocks require the divisor field to be non-zero or the
+ * above CKSTP toggle silently fails. Ensure that the divisor
+ * array is reset to its initial state on disable.
+ */
+ if (clk->flags & CLK_MASK_DIV_ON_DISABLE)
+ val |= clk->div_mask;
+
+ sh_clk_write(val, clk);
}
-static struct sh_clk_ops sh_clk_div6_clk_ops = {
- .recalc = sh_clk_div6_recalc,
+static struct sh_clk_ops sh_clk_div_clk_ops = {
+ .recalc = sh_clk_div_recalc,
+ .set_rate = sh_clk_div_set_rate,
.round_rate = sh_clk_div_round_rate,
- .set_rate = sh_clk_div6_set_rate,
- .enable = sh_clk_div6_enable,
- .disable = sh_clk_div6_disable,
};
-static struct sh_clk_ops sh_clk_div6_reparent_clk_ops = {
- .recalc = sh_clk_div6_recalc,
+static struct sh_clk_ops sh_clk_div_enable_clk_ops = {
+ .recalc = sh_clk_div_recalc,
+ .set_rate = sh_clk_div_set_rate,
.round_rate = sh_clk_div_round_rate,
- .set_rate = sh_clk_div6_set_rate,
- .enable = sh_clk_div6_enable,
- .disable = sh_clk_div6_disable,
- .set_parent = sh_clk_div6_set_parent,
+ .enable = sh_clk_div_enable,
+ .disable = sh_clk_div_disable,
};
static int __init sh_clk_init_parent(struct clk *clk)
@@ -218,12 +194,12 @@
return 0;
}
-static int __init sh_clk_div6_register_ops(struct clk *clks, int nr,
- struct sh_clk_ops *ops)
+static int __init sh_clk_div_register_ops(struct clk *clks, int nr,
+ struct clk_div_table *table, struct sh_clk_ops *ops)
{
struct clk *clkp;
void *freq_table;
- int nr_divs = sh_clk_div6_table.nr_divisors;
+ int nr_divs = table->div_mult_table->nr_divisors;
int freq_table_size = sizeof(struct cpufreq_frequency_table);
int ret = 0;
int k;
@@ -231,7 +207,7 @@
freq_table_size *= (nr_divs + 1);
freq_table = kzalloc(freq_table_size * nr, GFP_KERNEL);
if (!freq_table) {
- pr_err("sh_clk_div6_register: unable to alloc memory\n");
+ pr_err("%s: unable to alloc memory\n", __func__);
return -ENOMEM;
}
@@ -239,47 +215,98 @@
clkp = clks + k;
clkp->ops = ops;
+ clkp->priv = table;
+
clkp->freq_table = freq_table + (k * freq_table_size);
clkp->freq_table[nr_divs].frequency = CPUFREQ_TABLE_END;
- ret = clk_register(clkp);
- if (ret < 0)
- break;
- ret = sh_clk_init_parent(clkp);
+ ret = clk_register(clkp);
+ if (ret == 0)
+ ret = sh_clk_init_parent(clkp);
}
return ret;
}
+/*
+ * div6 support
+ */
+static int sh_clk_div6_divisors[64] = {
+ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
+ 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32,
+ 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48,
+ 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64
+};
+
+static struct clk_div_mult_table div6_div_mult_table = {
+ .divisors = sh_clk_div6_divisors,
+ .nr_divisors = ARRAY_SIZE(sh_clk_div6_divisors),
+};
+
+static struct clk_div_table sh_clk_div6_table = {
+ .div_mult_table = &div6_div_mult_table,
+};
+
+static int sh_clk_div6_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct clk_div_mult_table *table = clk_to_div_mult_table(clk);
+ u32 value;
+ int ret, i;
+
+ if (!clk->parent_table || !clk->parent_num)
+ return -EINVAL;
+
+ /* Search the parent */
+ for (i = 0; i < clk->parent_num; i++)
+ if (clk->parent_table[i] == parent)
+ break;
+
+ if (i == clk->parent_num)
+ return -ENODEV;
+
+ ret = clk_reparent(clk, parent);
+ if (ret < 0)
+ return ret;
+
+ value = sh_clk_read(clk) &
+ ~(((1 << clk->src_width) - 1) << clk->src_shift);
+
+ sh_clk_write(value | (i << clk->src_shift), clk);
+
+ /* Rebuild the frequency table */
+ clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
+ table, NULL);
+
+ return 0;
+}
+
+static struct sh_clk_ops sh_clk_div6_reparent_clk_ops = {
+ .recalc = sh_clk_div_recalc,
+ .round_rate = sh_clk_div_round_rate,
+ .set_rate = sh_clk_div_set_rate,
+ .enable = sh_clk_div_enable,
+ .disable = sh_clk_div_disable,
+ .set_parent = sh_clk_div6_set_parent,
+};
+
int __init sh_clk_div6_register(struct clk *clks, int nr)
{
- return sh_clk_div6_register_ops(clks, nr, &sh_clk_div6_clk_ops);
+ return sh_clk_div_register_ops(clks, nr, &sh_clk_div6_table,
+ &sh_clk_div_enable_clk_ops);
}
int __init sh_clk_div6_reparent_register(struct clk *clks, int nr)
{
- return sh_clk_div6_register_ops(clks, nr,
- &sh_clk_div6_reparent_clk_ops);
+ return sh_clk_div_register_ops(clks, nr, &sh_clk_div6_table,
+ &sh_clk_div6_reparent_clk_ops);
}
-static unsigned long sh_clk_div4_recalc(struct clk *clk)
-{
- struct clk_div4_table *d4t = clk->priv;
- struct clk_div_mult_table *table = d4t->div_mult_table;
- unsigned int idx;
-
- clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
- table, &clk->arch_flags);
-
- idx = (sh_clk_read(clk) >> clk->enable_bit) & 0x000f;
-
- return clk->freq_table[idx].frequency;
-}
-
+/*
+ * div4 support
+ */
static int sh_clk_div4_set_parent(struct clk *clk, struct clk *parent)
{
- struct clk_div4_table *d4t = clk->priv;
- struct clk_div_mult_table *table = d4t->div_mult_table;
+ struct clk_div_mult_table *table = clk_to_div_mult_table(clk);
u32 value;
int ret;
@@ -306,107 +333,31 @@
return 0;
}
-static int sh_clk_div4_set_rate(struct clk *clk, unsigned long rate)
-{
- struct clk_div4_table *d4t = clk->priv;
- unsigned long value;
- int idx = clk_rate_table_find(clk, clk->freq_table, rate);
- if (idx < 0)
- return idx;
-
- value = sh_clk_read(clk);
- value &= ~(0xf << clk->enable_bit);
- value |= (idx << clk->enable_bit);
- sh_clk_write(value, clk);
-
- if (d4t->kick)
- d4t->kick(clk);
-
- return 0;
-}
-
-static int sh_clk_div4_enable(struct clk *clk)
-{
- sh_clk_write(sh_clk_read(clk) & ~(1 << 8), clk);
- return 0;
-}
-
-static void sh_clk_div4_disable(struct clk *clk)
-{
- sh_clk_write(sh_clk_read(clk) | (1 << 8), clk);
-}
-
-static struct sh_clk_ops sh_clk_div4_clk_ops = {
- .recalc = sh_clk_div4_recalc,
- .set_rate = sh_clk_div4_set_rate,
- .round_rate = sh_clk_div_round_rate,
-};
-
-static struct sh_clk_ops sh_clk_div4_enable_clk_ops = {
- .recalc = sh_clk_div4_recalc,
- .set_rate = sh_clk_div4_set_rate,
- .round_rate = sh_clk_div_round_rate,
- .enable = sh_clk_div4_enable,
- .disable = sh_clk_div4_disable,
-};
-
static struct sh_clk_ops sh_clk_div4_reparent_clk_ops = {
- .recalc = sh_clk_div4_recalc,
- .set_rate = sh_clk_div4_set_rate,
+ .recalc = sh_clk_div_recalc,
+ .set_rate = sh_clk_div_set_rate,
.round_rate = sh_clk_div_round_rate,
- .enable = sh_clk_div4_enable,
- .disable = sh_clk_div4_disable,
+ .enable = sh_clk_div_enable,
+ .disable = sh_clk_div_disable,
.set_parent = sh_clk_div4_set_parent,
};
-static int __init sh_clk_div4_register_ops(struct clk *clks, int nr,
- struct clk_div4_table *table, struct sh_clk_ops *ops)
-{
- struct clk *clkp;
- void *freq_table;
- int nr_divs = table->div_mult_table->nr_divisors;
- int freq_table_size = sizeof(struct cpufreq_frequency_table);
- int ret = 0;
- int k;
-
- freq_table_size *= (nr_divs + 1);
- freq_table = kzalloc(freq_table_size * nr, GFP_KERNEL);
- if (!freq_table) {
- pr_err("sh_clk_div4_register: unable to alloc memory\n");
- return -ENOMEM;
- }
-
- for (k = 0; !ret && (k < nr); k++) {
- clkp = clks + k;
-
- clkp->ops = ops;
- clkp->priv = table;
-
- clkp->freq_table = freq_table + (k * freq_table_size);
- clkp->freq_table[nr_divs].frequency = CPUFREQ_TABLE_END;
-
- ret = clk_register(clkp);
- }
-
- return ret;
-}
-
int __init sh_clk_div4_register(struct clk *clks, int nr,
struct clk_div4_table *table)
{
- return sh_clk_div4_register_ops(clks, nr, table, &sh_clk_div4_clk_ops);
+ return sh_clk_div_register_ops(clks, nr, table, &sh_clk_div_clk_ops);
}
int __init sh_clk_div4_enable_register(struct clk *clks, int nr,
struct clk_div4_table *table)
{
- return sh_clk_div4_register_ops(clks, nr, table,
- &sh_clk_div4_enable_clk_ops);
+ return sh_clk_div_register_ops(clks, nr, table,
+ &sh_clk_div_enable_clk_ops);
}
int __init sh_clk_div4_reparent_register(struct clk *clks, int nr,
struct clk_div4_table *table)
{
- return sh_clk_div4_register_ops(clks, nr, table,
- &sh_clk_div4_reparent_clk_ops);
+ return sh_clk_div_register_ops(clks, nr, table,
+ &sh_clk_div4_reparent_clk_ops);
}
diff --git a/drivers/sh/intc/Makefile b/drivers/sh/intc/Makefile
index bb5df86..44f006d 100644
--- a/drivers/sh/intc/Makefile
+++ b/drivers/sh/intc/Makefile
@@ -1,4 +1,4 @@
-obj-y := access.o chip.o core.o dynamic.o handle.o virq.o
+obj-y := access.o chip.o core.o handle.o virq.o
obj-$(CONFIG_INTC_BALANCING) += balancing.o
obj-$(CONFIG_INTC_USERIMASK) += userimask.o
diff --git a/drivers/sh/intc/dynamic.c b/drivers/sh/intc/dynamic.c
deleted file mode 100644
index 14eb01e..0000000
--- a/drivers/sh/intc/dynamic.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Dynamic IRQ management
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * Modelled after arch/x86/kernel/apic/io_apic.c
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "intc: " fmt
-
-#include <linux/irq.h>
-#include <linux/bitmap.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include "internals.h" /* only for activate_irq() damage.. */
-
-/*
- * The IRQ bitmap provides a global map of bound IRQ vectors for a
- * given platform. Allocation of IRQs are either static through the CPU
- * vector map, or dynamic in the case of board mux vectors or MSI.
- *
- * As this is a central point for all IRQ controllers on the system,
- * each of the available sources are mapped out here. This combined with
- * sparseirq makes it quite trivial to keep the vector map tightly packed
- * when dynamically creating IRQs, as well as tying in to otherwise
- * unused irq_desc positions in the sparse array.
- */
-
-/*
- * Dynamic IRQ allocation and deallocation
- */
-unsigned int create_irq_nr(unsigned int irq_want, int node)
-{
- int irq = irq_alloc_desc_at(irq_want, node);
- if (irq < 0)
- return 0;
-
- activate_irq(irq);
- return irq;
-}
-
-int create_irq(void)
-{
- int irq = irq_alloc_desc(numa_node_id());
- if (irq >= 0)
- activate_irq(irq);
-
- return irq;
-}
-
-void destroy_irq(unsigned int irq)
-{
- irq_free_desc(irq);
-}
diff --git a/drivers/sh/intc/virq.c b/drivers/sh/intc/virq.c
index 93cec21..f30ac93 100644
--- a/drivers/sh/intc/virq.c
+++ b/drivers/sh/intc/virq.c
@@ -219,12 +219,14 @@
if (radix_tree_deref_retry(entry))
goto restart;
- irq = create_irq();
+ irq = irq_alloc_desc(numa_node_id());
if (unlikely(irq < 0)) {
pr_err("no more free IRQs, bailing..\n");
break;
}
+ activate_irq(irq);
+
pr_info("Setting up a chained VIRQ from %d -> %d\n",
irq, entry->pirq);
diff --git a/drivers/sh/pfc.c b/drivers/sh/pfc.c
deleted file mode 100644
index 522c6c4..0000000
--- a/drivers/sh/pfc.c
+++ /dev/null
@@ -1,739 +0,0 @@
-/*
- * Pinmuxed GPIO support for SuperH.
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-
-static void pfc_iounmap(struct pinmux_info *pip)
-{
- int k;
-
- for (k = 0; k < pip->num_resources; k++)
- if (pip->window[k].virt)
- iounmap(pip->window[k].virt);
-
- kfree(pip->window);
- pip->window = NULL;
-}
-
-static int pfc_ioremap(struct pinmux_info *pip)
-{
- struct resource *res;
- int k;
-
- if (!pip->num_resources)
- return 0;
-
- pip->window = kzalloc(pip->num_resources * sizeof(*pip->window),
- GFP_NOWAIT);
- if (!pip->window)
- goto err1;
-
- for (k = 0; k < pip->num_resources; k++) {
- res = pip->resource + k;
- WARN_ON(resource_type(res) != IORESOURCE_MEM);
- pip->window[k].phys = res->start;
- pip->window[k].size = resource_size(res);
- pip->window[k].virt = ioremap_nocache(res->start,
- resource_size(res));
- if (!pip->window[k].virt)
- goto err2;
- }
-
- return 0;
-
-err2:
- pfc_iounmap(pip);
-err1:
- return -1;
-}
-
-static void __iomem *pfc_phys_to_virt(struct pinmux_info *pip,
- unsigned long address)
-{
- struct pfc_window *window;
- int k;
-
- /* scan through physical windows and convert address */
- for (k = 0; k < pip->num_resources; k++) {
- window = pip->window + k;
-
- if (address < window->phys)
- continue;
-
- if (address >= (window->phys + window->size))
- continue;
-
- return window->virt + (address - window->phys);
- }
-
- /* no windows defined, register must be 1:1 mapped virt:phys */
- return (void __iomem *)address;
-}
-
-static int enum_in_range(pinmux_enum_t enum_id, struct pinmux_range *r)
-{
- if (enum_id < r->begin)
- return 0;
-
- if (enum_id > r->end)
- return 0;
-
- return 1;
-}
-
-static unsigned long gpio_read_raw_reg(void __iomem *mapped_reg,
- unsigned long reg_width)
-{
- switch (reg_width) {
- case 8:
- return ioread8(mapped_reg);
- case 16:
- return ioread16(mapped_reg);
- case 32:
- return ioread32(mapped_reg);
- }
-
- BUG();
- return 0;
-}
-
-static void gpio_write_raw_reg(void __iomem *mapped_reg,
- unsigned long reg_width,
- unsigned long data)
-{
- switch (reg_width) {
- case 8:
- iowrite8(data, mapped_reg);
- return;
- case 16:
- iowrite16(data, mapped_reg);
- return;
- case 32:
- iowrite32(data, mapped_reg);
- return;
- }
-
- BUG();
-}
-
-static int gpio_read_bit(struct pinmux_data_reg *dr,
- unsigned long in_pos)
-{
- unsigned long pos;
-
- pos = dr->reg_width - (in_pos + 1);
-
- pr_debug("read_bit: addr = %lx, pos = %ld, "
- "r_width = %ld\n", dr->reg, pos, dr->reg_width);
-
- return (gpio_read_raw_reg(dr->mapped_reg, dr->reg_width) >> pos) & 1;
-}
-
-static void gpio_write_bit(struct pinmux_data_reg *dr,
- unsigned long in_pos, unsigned long value)
-{
- unsigned long pos;
-
- pos = dr->reg_width - (in_pos + 1);
-
- pr_debug("write_bit addr = %lx, value = %d, pos = %ld, "
- "r_width = %ld\n",
- dr->reg, !!value, pos, dr->reg_width);
-
- if (value)
- set_bit(pos, &dr->reg_shadow);
- else
- clear_bit(pos, &dr->reg_shadow);
-
- gpio_write_raw_reg(dr->mapped_reg, dr->reg_width, dr->reg_shadow);
-}
-
-static void config_reg_helper(struct pinmux_info *gpioc,
- struct pinmux_cfg_reg *crp,
- unsigned long in_pos,
- void __iomem **mapped_regp,
- unsigned long *maskp,
- unsigned long *posp)
-{
- int k;
-
- *mapped_regp = pfc_phys_to_virt(gpioc, crp->reg);
-
- if (crp->field_width) {
- *maskp = (1 << crp->field_width) - 1;
- *posp = crp->reg_width - ((in_pos + 1) * crp->field_width);
- } else {
- *maskp = (1 << crp->var_field_width[in_pos]) - 1;
- *posp = crp->reg_width;
- for (k = 0; k <= in_pos; k++)
- *posp -= crp->var_field_width[k];
- }
-}
-
-static int read_config_reg(struct pinmux_info *gpioc,
- struct pinmux_cfg_reg *crp,
- unsigned long field)
-{
- void __iomem *mapped_reg;
- unsigned long mask, pos;
-
- config_reg_helper(gpioc, crp, field, &mapped_reg, &mask, &pos);
-
- pr_debug("read_reg: addr = %lx, field = %ld, "
- "r_width = %ld, f_width = %ld\n",
- crp->reg, field, crp->reg_width, crp->field_width);
-
- return (gpio_read_raw_reg(mapped_reg, crp->reg_width) >> pos) & mask;
-}
-
-static void write_config_reg(struct pinmux_info *gpioc,
- struct pinmux_cfg_reg *crp,
- unsigned long field, unsigned long value)
-{
- void __iomem *mapped_reg;
- unsigned long mask, pos, data;
-
- config_reg_helper(gpioc, crp, field, &mapped_reg, &mask, &pos);
-
- pr_debug("write_reg addr = %lx, value = %ld, field = %ld, "
- "r_width = %ld, f_width = %ld\n",
- crp->reg, value, field, crp->reg_width, crp->field_width);
-
- mask = ~(mask << pos);
- value = value << pos;
-
- data = gpio_read_raw_reg(mapped_reg, crp->reg_width);
- data &= mask;
- data |= value;
-
- if (gpioc->unlock_reg)
- gpio_write_raw_reg(pfc_phys_to_virt(gpioc, gpioc->unlock_reg),
- 32, ~data);
-
- gpio_write_raw_reg(mapped_reg, crp->reg_width, data);
-}
-
-static int setup_data_reg(struct pinmux_info *gpioc, unsigned gpio)
-{
- struct pinmux_gpio *gpiop = &gpioc->gpios[gpio];
- struct pinmux_data_reg *data_reg;
- int k, n;
-
- if (!enum_in_range(gpiop->enum_id, &gpioc->data))
- return -1;
-
- k = 0;
- while (1) {
- data_reg = gpioc->data_regs + k;
-
- if (!data_reg->reg_width)
- break;
-
- data_reg->mapped_reg = pfc_phys_to_virt(gpioc, data_reg->reg);
-
- for (n = 0; n < data_reg->reg_width; n++) {
- if (data_reg->enum_ids[n] == gpiop->enum_id) {
- gpiop->flags &= ~PINMUX_FLAG_DREG;
- gpiop->flags |= (k << PINMUX_FLAG_DREG_SHIFT);
- gpiop->flags &= ~PINMUX_FLAG_DBIT;
- gpiop->flags |= (n << PINMUX_FLAG_DBIT_SHIFT);
- return 0;
- }
- }
- k++;
- }
-
- BUG();
-
- return -1;
-}
-
-static void setup_data_regs(struct pinmux_info *gpioc)
-{
- struct pinmux_data_reg *drp;
- int k;
-
- for (k = gpioc->first_gpio; k <= gpioc->last_gpio; k++)
- setup_data_reg(gpioc, k);
-
- k = 0;
- while (1) {
- drp = gpioc->data_regs + k;
-
- if (!drp->reg_width)
- break;
-
- drp->reg_shadow = gpio_read_raw_reg(drp->mapped_reg,
- drp->reg_width);
- k++;
- }
-}
-
-static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio,
- struct pinmux_data_reg **drp, int *bitp)
-{
- struct pinmux_gpio *gpiop = &gpioc->gpios[gpio];
- int k, n;
-
- if (!enum_in_range(gpiop->enum_id, &gpioc->data))
- return -1;
-
- k = (gpiop->flags & PINMUX_FLAG_DREG) >> PINMUX_FLAG_DREG_SHIFT;
- n = (gpiop->flags & PINMUX_FLAG_DBIT) >> PINMUX_FLAG_DBIT_SHIFT;
- *drp = gpioc->data_regs + k;
- *bitp = n;
- return 0;
-}
-
-static int get_config_reg(struct pinmux_info *gpioc, pinmux_enum_t enum_id,
- struct pinmux_cfg_reg **crp,
- int *fieldp, int *valuep,
- unsigned long **cntp)
-{
- struct pinmux_cfg_reg *config_reg;
- unsigned long r_width, f_width, curr_width, ncomb;
- int k, m, n, pos, bit_pos;
-
- k = 0;
- while (1) {
- config_reg = gpioc->cfg_regs + k;
-
- r_width = config_reg->reg_width;
- f_width = config_reg->field_width;
-
- if (!r_width)
- break;
-
- pos = 0;
- m = 0;
- for (bit_pos = 0; bit_pos < r_width; bit_pos += curr_width) {
- if (f_width)
- curr_width = f_width;
- else
- curr_width = config_reg->var_field_width[m];
-
- ncomb = 1 << curr_width;
- for (n = 0; n < ncomb; n++) {
- if (config_reg->enum_ids[pos + n] == enum_id) {
- *crp = config_reg;
- *fieldp = m;
- *valuep = n;
- *cntp = &config_reg->cnt[m];
- return 0;
- }
- }
- pos += ncomb;
- m++;
- }
- k++;
- }
-
- return -1;
-}
-
-static int get_gpio_enum_id(struct pinmux_info *gpioc, unsigned gpio,
- int pos, pinmux_enum_t *enum_idp)
-{
- pinmux_enum_t enum_id = gpioc->gpios[gpio].enum_id;
- pinmux_enum_t *data = gpioc->gpio_data;
- int k;
-
- if (!enum_in_range(enum_id, &gpioc->data)) {
- if (!enum_in_range(enum_id, &gpioc->mark)) {
- pr_err("non data/mark enum_id for gpio %d\n", gpio);
- return -1;
- }
- }
-
- if (pos) {
- *enum_idp = data[pos + 1];
- return pos + 1;
- }
-
- for (k = 0; k < gpioc->gpio_data_size; k++) {
- if (data[k] == enum_id) {
- *enum_idp = data[k + 1];
- return k + 1;
- }
- }
-
- pr_err("cannot locate data/mark enum_id for gpio %d\n", gpio);
- return -1;
-}
-
-enum { GPIO_CFG_DRYRUN, GPIO_CFG_REQ, GPIO_CFG_FREE };
-
-static int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio,
- int pinmux_type, int cfg_mode)
-{
- struct pinmux_cfg_reg *cr = NULL;
- pinmux_enum_t enum_id;
- struct pinmux_range *range;
- int in_range, pos, field, value;
- unsigned long *cntp;
-
- switch (pinmux_type) {
-
- case PINMUX_TYPE_FUNCTION:
- range = NULL;
- break;
-
- case PINMUX_TYPE_OUTPUT:
- range = &gpioc->output;
- break;
-
- case PINMUX_TYPE_INPUT:
- range = &gpioc->input;
- break;
-
- case PINMUX_TYPE_INPUT_PULLUP:
- range = &gpioc->input_pu;
- break;
-
- case PINMUX_TYPE_INPUT_PULLDOWN:
- range = &gpioc->input_pd;
- break;
-
- default:
- goto out_err;
- }
-
- pos = 0;
- enum_id = 0;
- field = 0;
- value = 0;
- while (1) {
- pos = get_gpio_enum_id(gpioc, gpio, pos, &enum_id);
- if (pos <= 0)
- goto out_err;
-
- if (!enum_id)
- break;
-
- /* first check if this is a function enum */
- in_range = enum_in_range(enum_id, &gpioc->function);
- if (!in_range) {
- /* not a function enum */
- if (range) {
- /*
- * other range exists, so this pin is
- * a regular GPIO pin that now is being
- * bound to a specific direction.
- *
- * for this case we only allow function enums
- * and the enums that match the other range.
- */
- in_range = enum_in_range(enum_id, range);
-
- /*
- * special case pass through for fixed
- * input-only or output-only pins without
- * function enum register association.
- */
- if (in_range && enum_id == range->force)
- continue;
- } else {
- /*
- * no other range exists, so this pin
- * must then be of the function type.
- *
- * allow function type pins to select
- * any combination of function/in/out
- * in their MARK lists.
- */
- in_range = 1;
- }
- }
-
- if (!in_range)
- continue;
-
- if (get_config_reg(gpioc, enum_id, &cr,
- &field, &value, &cntp) != 0)
- goto out_err;
-
- switch (cfg_mode) {
- case GPIO_CFG_DRYRUN:
- if (!*cntp ||
- (read_config_reg(gpioc, cr, field) != value))
- continue;
- break;
-
- case GPIO_CFG_REQ:
- write_config_reg(gpioc, cr, field, value);
- *cntp = *cntp + 1;
- break;
-
- case GPIO_CFG_FREE:
- *cntp = *cntp - 1;
- break;
- }
- }
-
- return 0;
- out_err:
- return -1;
-}
-
-static DEFINE_SPINLOCK(gpio_lock);
-
-static struct pinmux_info *chip_to_pinmux(struct gpio_chip *chip)
-{
- return container_of(chip, struct pinmux_info, chip);
-}
-
-static int sh_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
- struct pinmux_info *gpioc = chip_to_pinmux(chip);
- struct pinmux_data_reg *dummy;
- unsigned long flags;
- int i, ret, pinmux_type;
-
- ret = -EINVAL;
-
- if (!gpioc)
- goto err_out;
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- if ((gpioc->gpios[offset].flags & PINMUX_FLAG_TYPE) != PINMUX_TYPE_NONE)
- goto err_unlock;
-
- /* setup pin function here if no data is associated with pin */
-
- if (get_data_reg(gpioc, offset, &dummy, &i) != 0)
- pinmux_type = PINMUX_TYPE_FUNCTION;
- else
- pinmux_type = PINMUX_TYPE_GPIO;
-
- if (pinmux_type == PINMUX_TYPE_FUNCTION) {
- if (pinmux_config_gpio(gpioc, offset,
- pinmux_type,
- GPIO_CFG_DRYRUN) != 0)
- goto err_unlock;
-
- if (pinmux_config_gpio(gpioc, offset,
- pinmux_type,
- GPIO_CFG_REQ) != 0)
- BUG();
- }
-
- gpioc->gpios[offset].flags &= ~PINMUX_FLAG_TYPE;
- gpioc->gpios[offset].flags |= pinmux_type;
-
- ret = 0;
- err_unlock:
- spin_unlock_irqrestore(&gpio_lock, flags);
- err_out:
- return ret;
-}
-
-static void sh_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
- struct pinmux_info *gpioc = chip_to_pinmux(chip);
- unsigned long flags;
- int pinmux_type;
-
- if (!gpioc)
- return;
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- pinmux_type = gpioc->gpios[offset].flags & PINMUX_FLAG_TYPE;
- pinmux_config_gpio(gpioc, offset, pinmux_type, GPIO_CFG_FREE);
- gpioc->gpios[offset].flags &= ~PINMUX_FLAG_TYPE;
- gpioc->gpios[offset].flags |= PINMUX_TYPE_NONE;
-
- spin_unlock_irqrestore(&gpio_lock, flags);
-}
-
-static int pinmux_direction(struct pinmux_info *gpioc,
- unsigned gpio, int new_pinmux_type)
-{
- int pinmux_type;
- int ret = -EINVAL;
-
- if (!gpioc)
- goto err_out;
-
- pinmux_type = gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE;
-
- switch (pinmux_type) {
- case PINMUX_TYPE_GPIO:
- break;
- case PINMUX_TYPE_OUTPUT:
- case PINMUX_TYPE_INPUT:
- case PINMUX_TYPE_INPUT_PULLUP:
- case PINMUX_TYPE_INPUT_PULLDOWN:
- pinmux_config_gpio(gpioc, gpio, pinmux_type, GPIO_CFG_FREE);
- break;
- default:
- goto err_out;
- }
-
- if (pinmux_config_gpio(gpioc, gpio,
- new_pinmux_type,
- GPIO_CFG_DRYRUN) != 0)
- goto err_out;
-
- if (pinmux_config_gpio(gpioc, gpio,
- new_pinmux_type,
- GPIO_CFG_REQ) != 0)
- BUG();
-
- gpioc->gpios[gpio].flags &= ~PINMUX_FLAG_TYPE;
- gpioc->gpios[gpio].flags |= new_pinmux_type;
-
- ret = 0;
- err_out:
- return ret;
-}
-
-static int sh_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- struct pinmux_info *gpioc = chip_to_pinmux(chip);
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&gpio_lock, flags);
- ret = pinmux_direction(gpioc, offset, PINMUX_TYPE_INPUT);
- spin_unlock_irqrestore(&gpio_lock, flags);
-
- return ret;
-}
-
-static void sh_gpio_set_value(struct pinmux_info *gpioc,
- unsigned gpio, int value)
-{
- struct pinmux_data_reg *dr = NULL;
- int bit = 0;
-
- if (!gpioc || get_data_reg(gpioc, gpio, &dr, &bit) != 0)
- BUG();
- else
- gpio_write_bit(dr, bit, value);
-}
-
-static int sh_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
- int value)
-{
- struct pinmux_info *gpioc = chip_to_pinmux(chip);
- unsigned long flags;
- int ret;
-
- sh_gpio_set_value(gpioc, offset, value);
- spin_lock_irqsave(&gpio_lock, flags);
- ret = pinmux_direction(gpioc, offset, PINMUX_TYPE_OUTPUT);
- spin_unlock_irqrestore(&gpio_lock, flags);
-
- return ret;
-}
-
-static int sh_gpio_get_value(struct pinmux_info *gpioc, unsigned gpio)
-{
- struct pinmux_data_reg *dr = NULL;
- int bit = 0;
-
- if (!gpioc || get_data_reg(gpioc, gpio, &dr, &bit) != 0)
- return -EINVAL;
-
- return gpio_read_bit(dr, bit);
-}
-
-static int sh_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- return sh_gpio_get_value(chip_to_pinmux(chip), offset);
-}
-
-static void sh_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- sh_gpio_set_value(chip_to_pinmux(chip), offset, value);
-}
-
-static int sh_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- struct pinmux_info *gpioc = chip_to_pinmux(chip);
- pinmux_enum_t enum_id;
- pinmux_enum_t *enum_ids;
- int i, k, pos;
-
- pos = 0;
- enum_id = 0;
- while (1) {
- pos = get_gpio_enum_id(gpioc, offset, pos, &enum_id);
- if (pos <= 0 || !enum_id)
- break;
-
- for (i = 0; i < gpioc->gpio_irq_size; i++) {
- enum_ids = gpioc->gpio_irq[i].enum_ids;
- for (k = 0; enum_ids[k]; k++) {
- if (enum_ids[k] == enum_id)
- return gpioc->gpio_irq[i].irq;
- }
- }
- }
-
- return -ENOSYS;
-}
-
-int register_pinmux(struct pinmux_info *pip)
-{
- struct gpio_chip *chip = &pip->chip;
- int ret;
-
- pr_info("%s handling gpio %d -> %d\n",
- pip->name, pip->first_gpio, pip->last_gpio);
-
- ret = pfc_ioremap(pip);
- if (ret < 0)
- return ret;
-
- setup_data_regs(pip);
-
- chip->request = sh_gpio_request;
- chip->free = sh_gpio_free;
- chip->direction_input = sh_gpio_direction_input;
- chip->get = sh_gpio_get;
- chip->direction_output = sh_gpio_direction_output;
- chip->set = sh_gpio_set;
- chip->to_irq = sh_gpio_to_irq;
-
- WARN_ON(pip->first_gpio != 0); /* needs testing */
-
- chip->label = pip->name;
- chip->owner = THIS_MODULE;
- chip->base = pip->first_gpio;
- chip->ngpio = (pip->last_gpio - pip->first_gpio) + 1;
-
- ret = gpiochip_add(chip);
- if (ret < 0)
- pfc_iounmap(pip);
-
- return ret;
-}
-
-int unregister_pinmux(struct pinmux_info *pip)
-{
- pr_info("%s deregistering\n", pip->name);
- pfc_iounmap(pip);
- return gpiochip_remove(&pip->chip);
-}
diff --git a/drivers/sh/pfc/Kconfig b/drivers/sh/pfc/Kconfig
new file mode 100644
index 0000000..804f9ad
--- /dev/null
+++ b/drivers/sh/pfc/Kconfig
@@ -0,0 +1,26 @@
+comment "Pin function controller options"
+
+config SH_PFC
+ # XXX move off the gpio dependency
+ depends on GENERIC_GPIO
+ select GPIO_SH_PFC if ARCH_REQUIRE_GPIOLIB
+ select PINCTRL_SH_PFC
+ def_bool y
+
+#
+# Placeholder for now, rehome to drivers/pinctrl once the PFC APIs
+# have settled.
+#
+config PINCTRL_SH_PFC
+ tristate "SuperH PFC pin controller driver"
+ depends on SH_PFC
+ select PINCTRL
+ select PINMUX
+ select PINCONF
+
+config GPIO_SH_PFC
+ tristate "SuperH PFC GPIO support"
+ depends on SH_PFC && GPIOLIB
+ help
+ This enables support for GPIOs within the SoC's pin function
+ controller.
diff --git a/drivers/sh/pfc/Makefile b/drivers/sh/pfc/Makefile
new file mode 100644
index 0000000..7916027
--- /dev/null
+++ b/drivers/sh/pfc/Makefile
@@ -0,0 +1,3 @@
+obj-y += core.o
+obj-$(CONFIG_PINCTRL_SH_PFC) += pinctrl.o
+obj-$(CONFIG_GPIO_SH_PFC) += gpio.o
diff --git a/drivers/sh/pfc/core.c b/drivers/sh/pfc/core.c
new file mode 100644
index 0000000..6816937
--- /dev/null
+++ b/drivers/sh/pfc/core.c
@@ -0,0 +1,572 @@
+/*
+ * SuperH Pin Function Controller support.
+ *
+ * Copyright (C) 2008 Magnus Damm
+ * Copyright (C) 2009 - 2012 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) "sh_pfc " KBUILD_MODNAME ": " fmt
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/sh_pfc.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/pinctrl/machine.h>
+
+static struct sh_pfc *sh_pfc __read_mostly;
+
+static inline bool sh_pfc_initialized(void)
+{
+ return !!sh_pfc;
+}
+
+static void pfc_iounmap(struct sh_pfc *pfc)
+{
+ int k;
+
+ for (k = 0; k < pfc->num_resources; k++)
+ if (pfc->window[k].virt)
+ iounmap(pfc->window[k].virt);
+
+ kfree(pfc->window);
+ pfc->window = NULL;
+}
+
+static int pfc_ioremap(struct sh_pfc *pfc)
+{
+ struct resource *res;
+ int k;
+
+ if (!pfc->num_resources)
+ return 0;
+
+ pfc->window = kzalloc(pfc->num_resources * sizeof(*pfc->window),
+ GFP_NOWAIT);
+ if (!pfc->window)
+ goto err1;
+
+ for (k = 0; k < pfc->num_resources; k++) {
+ res = pfc->resource + k;
+ WARN_ON(resource_type(res) != IORESOURCE_MEM);
+ pfc->window[k].phys = res->start;
+ pfc->window[k].size = resource_size(res);
+ pfc->window[k].virt = ioremap_nocache(res->start,
+ resource_size(res));
+ if (!pfc->window[k].virt)
+ goto err2;
+ }
+
+ return 0;
+
+err2:
+ pfc_iounmap(pfc);
+err1:
+ return -1;
+}
+
+static void __iomem *pfc_phys_to_virt(struct sh_pfc *pfc,
+ unsigned long address)
+{
+ struct pfc_window *window;
+ int k;
+
+ /* scan through physical windows and convert address */
+ for (k = 0; k < pfc->num_resources; k++) {
+ window = pfc->window + k;
+
+ if (address < window->phys)
+ continue;
+
+ if (address >= (window->phys + window->size))
+ continue;
+
+ return window->virt + (address - window->phys);
+ }
+
+ /* no windows defined, register must be 1:1 mapped virt:phys */
+ return (void __iomem *)address;
+}
+
+static int enum_in_range(pinmux_enum_t enum_id, struct pinmux_range *r)
+{
+ if (enum_id < r->begin)
+ return 0;
+
+ if (enum_id > r->end)
+ return 0;
+
+ return 1;
+}
+
+static unsigned long gpio_read_raw_reg(void __iomem *mapped_reg,
+ unsigned long reg_width)
+{
+ switch (reg_width) {
+ case 8:
+ return ioread8(mapped_reg);
+ case 16:
+ return ioread16(mapped_reg);
+ case 32:
+ return ioread32(mapped_reg);
+ }
+
+ BUG();
+ return 0;
+}
+
+static void gpio_write_raw_reg(void __iomem *mapped_reg,
+ unsigned long reg_width,
+ unsigned long data)
+{
+ switch (reg_width) {
+ case 8:
+ iowrite8(data, mapped_reg);
+ return;
+ case 16:
+ iowrite16(data, mapped_reg);
+ return;
+ case 32:
+ iowrite32(data, mapped_reg);
+ return;
+ }
+
+ BUG();
+}
+
+int sh_pfc_read_bit(struct pinmux_data_reg *dr, unsigned long in_pos)
+{
+ unsigned long pos;
+
+ pos = dr->reg_width - (in_pos + 1);
+
+ pr_debug("read_bit: addr = %lx, pos = %ld, "
+ "r_width = %ld\n", dr->reg, pos, dr->reg_width);
+
+ return (gpio_read_raw_reg(dr->mapped_reg, dr->reg_width) >> pos) & 1;
+}
+EXPORT_SYMBOL_GPL(sh_pfc_read_bit);
+
+void sh_pfc_write_bit(struct pinmux_data_reg *dr, unsigned long in_pos,
+ unsigned long value)
+{
+ unsigned long pos;
+
+ pos = dr->reg_width - (in_pos + 1);
+
+ pr_debug("write_bit addr = %lx, value = %d, pos = %ld, "
+ "r_width = %ld\n",
+ dr->reg, !!value, pos, dr->reg_width);
+
+ if (value)
+ set_bit(pos, &dr->reg_shadow);
+ else
+ clear_bit(pos, &dr->reg_shadow);
+
+ gpio_write_raw_reg(dr->mapped_reg, dr->reg_width, dr->reg_shadow);
+}
+EXPORT_SYMBOL_GPL(sh_pfc_write_bit);
+
+static void config_reg_helper(struct sh_pfc *pfc,
+ struct pinmux_cfg_reg *crp,
+ unsigned long in_pos,
+ void __iomem **mapped_regp,
+ unsigned long *maskp,
+ unsigned long *posp)
+{
+ int k;
+
+ *mapped_regp = pfc_phys_to_virt(pfc, crp->reg);
+
+ if (crp->field_width) {
+ *maskp = (1 << crp->field_width) - 1;
+ *posp = crp->reg_width - ((in_pos + 1) * crp->field_width);
+ } else {
+ *maskp = (1 << crp->var_field_width[in_pos]) - 1;
+ *posp = crp->reg_width;
+ for (k = 0; k <= in_pos; k++)
+ *posp -= crp->var_field_width[k];
+ }
+}
+
+static int read_config_reg(struct sh_pfc *pfc,
+ struct pinmux_cfg_reg *crp,
+ unsigned long field)
+{
+ void __iomem *mapped_reg;
+ unsigned long mask, pos;
+
+ config_reg_helper(pfc, crp, field, &mapped_reg, &mask, &pos);
+
+ pr_debug("read_reg: addr = %lx, field = %ld, "
+ "r_width = %ld, f_width = %ld\n",
+ crp->reg, field, crp->reg_width, crp->field_width);
+
+ return (gpio_read_raw_reg(mapped_reg, crp->reg_width) >> pos) & mask;
+}
+
+static void write_config_reg(struct sh_pfc *pfc,
+ struct pinmux_cfg_reg *crp,
+ unsigned long field, unsigned long value)
+{
+ void __iomem *mapped_reg;
+ unsigned long mask, pos, data;
+
+ config_reg_helper(pfc, crp, field, &mapped_reg, &mask, &pos);
+
+ pr_debug("write_reg addr = %lx, value = %ld, field = %ld, "
+ "r_width = %ld, f_width = %ld\n",
+ crp->reg, value, field, crp->reg_width, crp->field_width);
+
+ mask = ~(mask << pos);
+ value = value << pos;
+
+ data = gpio_read_raw_reg(mapped_reg, crp->reg_width);
+ data &= mask;
+ data |= value;
+
+ if (pfc->unlock_reg)
+ gpio_write_raw_reg(pfc_phys_to_virt(pfc, pfc->unlock_reg),
+ 32, ~data);
+
+ gpio_write_raw_reg(mapped_reg, crp->reg_width, data);
+}
+
+static int setup_data_reg(struct sh_pfc *pfc, unsigned gpio)
+{
+ struct pinmux_gpio *gpiop = &pfc->gpios[gpio];
+ struct pinmux_data_reg *data_reg;
+ int k, n;
+
+ if (!enum_in_range(gpiop->enum_id, &pfc->data))
+ return -1;
+
+ k = 0;
+ while (1) {
+ data_reg = pfc->data_regs + k;
+
+ if (!data_reg->reg_width)
+ break;
+
+ data_reg->mapped_reg = pfc_phys_to_virt(pfc, data_reg->reg);
+
+ for (n = 0; n < data_reg->reg_width; n++) {
+ if (data_reg->enum_ids[n] == gpiop->enum_id) {
+ gpiop->flags &= ~PINMUX_FLAG_DREG;
+ gpiop->flags |= (k << PINMUX_FLAG_DREG_SHIFT);
+ gpiop->flags &= ~PINMUX_FLAG_DBIT;
+ gpiop->flags |= (n << PINMUX_FLAG_DBIT_SHIFT);
+ return 0;
+ }
+ }
+ k++;
+ }
+
+ BUG();
+
+ return -1;
+}
+
+static void setup_data_regs(struct sh_pfc *pfc)
+{
+ struct pinmux_data_reg *drp;
+ int k;
+
+ for (k = pfc->first_gpio; k <= pfc->last_gpio; k++)
+ setup_data_reg(pfc, k);
+
+ k = 0;
+ while (1) {
+ drp = pfc->data_regs + k;
+
+ if (!drp->reg_width)
+ break;
+
+ drp->reg_shadow = gpio_read_raw_reg(drp->mapped_reg,
+ drp->reg_width);
+ k++;
+ }
+}
+
+int sh_pfc_get_data_reg(struct sh_pfc *pfc, unsigned gpio,
+ struct pinmux_data_reg **drp, int *bitp)
+{
+ struct pinmux_gpio *gpiop = &pfc->gpios[gpio];
+ int k, n;
+
+ if (!enum_in_range(gpiop->enum_id, &pfc->data))
+ return -1;
+
+ k = (gpiop->flags & PINMUX_FLAG_DREG) >> PINMUX_FLAG_DREG_SHIFT;
+ n = (gpiop->flags & PINMUX_FLAG_DBIT) >> PINMUX_FLAG_DBIT_SHIFT;
+ *drp = pfc->data_regs + k;
+ *bitp = n;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(sh_pfc_get_data_reg);
+
+static int get_config_reg(struct sh_pfc *pfc, pinmux_enum_t enum_id,
+ struct pinmux_cfg_reg **crp,
+ int *fieldp, int *valuep,
+ unsigned long **cntp)
+{
+ struct pinmux_cfg_reg *config_reg;
+ unsigned long r_width, f_width, curr_width, ncomb;
+ int k, m, n, pos, bit_pos;
+
+ k = 0;
+ while (1) {
+ config_reg = pfc->cfg_regs + k;
+
+ r_width = config_reg->reg_width;
+ f_width = config_reg->field_width;
+
+ if (!r_width)
+ break;
+
+ pos = 0;
+ m = 0;
+ for (bit_pos = 0; bit_pos < r_width; bit_pos += curr_width) {
+ if (f_width)
+ curr_width = f_width;
+ else
+ curr_width = config_reg->var_field_width[m];
+
+ ncomb = 1 << curr_width;
+ for (n = 0; n < ncomb; n++) {
+ if (config_reg->enum_ids[pos + n] == enum_id) {
+ *crp = config_reg;
+ *fieldp = m;
+ *valuep = n;
+ *cntp = &config_reg->cnt[m];
+ return 0;
+ }
+ }
+ pos += ncomb;
+ m++;
+ }
+ k++;
+ }
+
+ return -1;
+}
+
+int sh_pfc_gpio_to_enum(struct sh_pfc *pfc, unsigned gpio, int pos,
+ pinmux_enum_t *enum_idp)
+{
+ pinmux_enum_t enum_id = pfc->gpios[gpio].enum_id;
+ pinmux_enum_t *data = pfc->gpio_data;
+ int k;
+
+ if (!enum_in_range(enum_id, &pfc->data)) {
+ if (!enum_in_range(enum_id, &pfc->mark)) {
+ pr_err("non data/mark enum_id for gpio %d\n", gpio);
+ return -1;
+ }
+ }
+
+ if (pos) {
+ *enum_idp = data[pos + 1];
+ return pos + 1;
+ }
+
+ for (k = 0; k < pfc->gpio_data_size; k++) {
+ if (data[k] == enum_id) {
+ *enum_idp = data[k + 1];
+ return k + 1;
+ }
+ }
+
+ pr_err("cannot locate data/mark enum_id for gpio %d\n", gpio);
+ return -1;
+}
+EXPORT_SYMBOL_GPL(sh_pfc_gpio_to_enum);
+
+int sh_pfc_config_gpio(struct sh_pfc *pfc, unsigned gpio, int pinmux_type,
+ int cfg_mode)
+{
+ struct pinmux_cfg_reg *cr = NULL;
+ pinmux_enum_t enum_id;
+ struct pinmux_range *range;
+ int in_range, pos, field, value;
+ unsigned long *cntp;
+
+ switch (pinmux_type) {
+
+ case PINMUX_TYPE_FUNCTION:
+ range = NULL;
+ break;
+
+ case PINMUX_TYPE_OUTPUT:
+ range = &pfc->output;
+ break;
+
+ case PINMUX_TYPE_INPUT:
+ range = &pfc->input;
+ break;
+
+ case PINMUX_TYPE_INPUT_PULLUP:
+ range = &pfc->input_pu;
+ break;
+
+ case PINMUX_TYPE_INPUT_PULLDOWN:
+ range = &pfc->input_pd;
+ break;
+
+ default:
+ goto out_err;
+ }
+
+ pos = 0;
+ enum_id = 0;
+ field = 0;
+ value = 0;
+ while (1) {
+ pos = sh_pfc_gpio_to_enum(pfc, gpio, pos, &enum_id);
+ if (pos <= 0)
+ goto out_err;
+
+ if (!enum_id)
+ break;
+
+ /* first check if this is a function enum */
+ in_range = enum_in_range(enum_id, &pfc->function);
+ if (!in_range) {
+ /* not a function enum */
+ if (range) {
+ /*
+ * other range exists, so this pin is
+ * a regular GPIO pin that now is being
+ * bound to a specific direction.
+ *
+ * for this case we only allow function enums
+ * and the enums that match the other range.
+ */
+ in_range = enum_in_range(enum_id, range);
+
+ /*
+ * special case pass through for fixed
+ * input-only or output-only pins without
+ * function enum register association.
+ */
+ if (in_range && enum_id == range->force)
+ continue;
+ } else {
+ /*
+ * no other range exists, so this pin
+ * must then be of the function type.
+ *
+ * allow function type pins to select
+ * any combination of function/in/out
+ * in their MARK lists.
+ */
+ in_range = 1;
+ }
+ }
+
+ if (!in_range)
+ continue;
+
+ if (get_config_reg(pfc, enum_id, &cr,
+ &field, &value, &cntp) != 0)
+ goto out_err;
+
+ switch (cfg_mode) {
+ case GPIO_CFG_DRYRUN:
+ if (!*cntp ||
+ (read_config_reg(pfc, cr, field) != value))
+ continue;
+ break;
+
+ case GPIO_CFG_REQ:
+ write_config_reg(pfc, cr, field, value);
+ *cntp = *cntp + 1;
+ break;
+
+ case GPIO_CFG_FREE:
+ *cntp = *cntp - 1;
+ break;
+ }
+ }
+
+ return 0;
+ out_err:
+ return -1;
+}
+EXPORT_SYMBOL_GPL(sh_pfc_config_gpio);
+
+int register_sh_pfc(struct sh_pfc *pfc)
+{
+ int (*initroutine)(struct sh_pfc *) = NULL;
+ int ret;
+
+ /*
+ * Ensure that the type encoding fits
+ */
+ BUILD_BUG_ON(PINMUX_FLAG_TYPE > ((1 << PINMUX_FLAG_DBIT_SHIFT) - 1));
+
+ if (sh_pfc)
+ return -EBUSY;
+
+ ret = pfc_ioremap(pfc);
+ if (unlikely(ret < 0))
+ return ret;
+
+ spin_lock_init(&pfc->lock);
+
+ pinctrl_provide_dummies();
+ setup_data_regs(pfc);
+
+ sh_pfc = pfc;
+
+ /*
+ * Initialize pinctrl bindings first
+ */
+ initroutine = symbol_request(sh_pfc_register_pinctrl);
+ if (initroutine) {
+ ret = (*initroutine)(pfc);
+ symbol_put_addr(initroutine);
+
+ if (unlikely(ret != 0))
+ goto err;
+ } else {
+ pr_err("failed to initialize pinctrl bindings\n");
+ goto err;
+ }
+
+ /*
+ * Then the GPIO chip
+ */
+ initroutine = symbol_request(sh_pfc_register_gpiochip);
+ if (initroutine) {
+ ret = (*initroutine)(pfc);
+ symbol_put_addr(initroutine);
+
+ /*
+ * If the GPIO chip fails to come up we still leave the
+ * PFC state as it is, given that there are already
+ * extant users of it that have succeeded by this point.
+ */
+ if (unlikely(ret != 0)) {
+ pr_notice("failed to init GPIO chip, ignoring...\n");
+ ret = 0;
+ }
+ }
+
+ pr_info("%s support registered\n", pfc->name);
+
+ return 0;
+
+err:
+ pfc_iounmap(pfc);
+ sh_pfc = NULL;
+
+ return ret;
+}
diff --git a/drivers/sh/pfc/gpio.c b/drivers/sh/pfc/gpio.c
new file mode 100644
index 0000000..62bca98
--- /dev/null
+++ b/drivers/sh/pfc/gpio.c
@@ -0,0 +1,239 @@
+/*
+ * SuperH Pin Function Controller GPIO driver.
+ *
+ * Copyright (C) 2008 Magnus Damm
+ * Copyright (C) 2009 - 2012 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) "sh_pfc " KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/consumer.h>
+
+struct sh_pfc_chip {
+ struct sh_pfc *pfc;
+ struct gpio_chip gpio_chip;
+};
+
+static struct sh_pfc_chip *gpio_to_pfc_chip(struct gpio_chip *gc)
+{
+ return container_of(gc, struct sh_pfc_chip, gpio_chip);
+}
+
+static struct sh_pfc *gpio_to_pfc(struct gpio_chip *gc)
+{
+ return gpio_to_pfc_chip(gc)->pfc;
+}
+
+static int sh_gpio_request(struct gpio_chip *gc, unsigned offset)
+{
+ return pinctrl_request_gpio(offset);
+}
+
+static void sh_gpio_free(struct gpio_chip *gc, unsigned offset)
+{
+ pinctrl_free_gpio(offset);
+}
+
+static void sh_gpio_set_value(struct sh_pfc *pfc, unsigned gpio, int value)
+{
+ struct pinmux_data_reg *dr = NULL;
+ int bit = 0;
+
+ if (!pfc || sh_pfc_get_data_reg(pfc, gpio, &dr, &bit) != 0)
+ BUG();
+ else
+ sh_pfc_write_bit(dr, bit, value);
+}
+
+static int sh_gpio_get_value(struct sh_pfc *pfc, unsigned gpio)
+{
+ struct pinmux_data_reg *dr = NULL;
+ int bit = 0;
+
+ if (!pfc || sh_pfc_get_data_reg(pfc, gpio, &dr, &bit) != 0)
+ return -EINVAL;
+
+ return sh_pfc_read_bit(dr, bit);
+}
+
+static int sh_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+ return pinctrl_gpio_direction_input(offset);
+}
+
+static int sh_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
+ int value)
+{
+ sh_gpio_set_value(gpio_to_pfc(gc), offset, value);
+
+ return pinctrl_gpio_direction_output(offset);
+}
+
+static int sh_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+ return sh_gpio_get_value(gpio_to_pfc(gc), offset);
+}
+
+static void sh_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+ sh_gpio_set_value(gpio_to_pfc(gc), offset, value);
+}
+
+static int sh_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+ struct sh_pfc *pfc = gpio_to_pfc(gc);
+ pinmux_enum_t enum_id;
+ pinmux_enum_t *enum_ids;
+ int i, k, pos;
+
+ pos = 0;
+ enum_id = 0;
+ while (1) {
+ pos = sh_pfc_gpio_to_enum(pfc, offset, pos, &enum_id);
+ if (pos <= 0 || !enum_id)
+ break;
+
+ for (i = 0; i < pfc->gpio_irq_size; i++) {
+ enum_ids = pfc->gpio_irq[i].enum_ids;
+ for (k = 0; enum_ids[k]; k++) {
+ if (enum_ids[k] == enum_id)
+ return pfc->gpio_irq[i].irq;
+ }
+ }
+ }
+
+ return -ENOSYS;
+}
+
+static void sh_pfc_gpio_setup(struct sh_pfc_chip *chip)
+{
+ struct sh_pfc *pfc = chip->pfc;
+ struct gpio_chip *gc = &chip->gpio_chip;
+
+ gc->request = sh_gpio_request;
+ gc->free = sh_gpio_free;
+ gc->direction_input = sh_gpio_direction_input;
+ gc->get = sh_gpio_get;
+ gc->direction_output = sh_gpio_direction_output;
+ gc->set = sh_gpio_set;
+ gc->to_irq = sh_gpio_to_irq;
+
+ WARN_ON(pfc->first_gpio != 0); /* needs testing */
+
+ gc->label = pfc->name;
+ gc->owner = THIS_MODULE;
+ gc->base = pfc->first_gpio;
+ gc->ngpio = (pfc->last_gpio - pfc->first_gpio) + 1;
+}
+
+int sh_pfc_register_gpiochip(struct sh_pfc *pfc)
+{
+ struct sh_pfc_chip *chip;
+ int ret;
+
+ chip = kzalloc(sizeof(struct sh_pfc_chip), GFP_KERNEL);
+ if (unlikely(!chip))
+ return -ENOMEM;
+
+ chip->pfc = pfc;
+
+ sh_pfc_gpio_setup(chip);
+
+ ret = gpiochip_add(&chip->gpio_chip);
+ if (unlikely(ret < 0))
+ kfree(chip);
+
+ pr_info("%s handling gpio %d -> %d\n",
+ pfc->name, pfc->first_gpio, pfc->last_gpio);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(sh_pfc_register_gpiochip);
+
+static int sh_pfc_gpio_match(struct gpio_chip *gc, void *data)
+{
+ return !!strstr(gc->label, data);
+}
+
+static int __devinit sh_pfc_gpio_probe(struct platform_device *pdev)
+{
+ struct sh_pfc_chip *chip;
+ struct gpio_chip *gc;
+
+ gc = gpiochip_find("_pfc", sh_pfc_gpio_match);
+ if (unlikely(!gc)) {
+ pr_err("Cant find gpio chip\n");
+ return -ENODEV;
+ }
+
+ chip = gpio_to_pfc_chip(gc);
+ platform_set_drvdata(pdev, chip);
+
+ pr_info("attaching to GPIO chip %s\n", chip->pfc->name);
+
+ return 0;
+}
+
+static int __devexit sh_pfc_gpio_remove(struct platform_device *pdev)
+{
+ struct sh_pfc_chip *chip = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = gpiochip_remove(&chip->gpio_chip);
+ if (unlikely(ret < 0))
+ return ret;
+
+ kfree(chip);
+ return 0;
+}
+
+static struct platform_driver sh_pfc_gpio_driver = {
+ .probe = sh_pfc_gpio_probe,
+ .remove = __devexit_p(sh_pfc_gpio_remove),
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static struct platform_device sh_pfc_gpio_device = {
+ .name = KBUILD_MODNAME,
+ .id = -1,
+};
+
+static int __init sh_pfc_gpio_init(void)
+{
+ int rc;
+
+ rc = platform_driver_register(&sh_pfc_gpio_driver);
+ if (likely(!rc)) {
+ rc = platform_device_register(&sh_pfc_gpio_device);
+ if (unlikely(rc))
+ platform_driver_unregister(&sh_pfc_gpio_driver);
+ }
+
+ return rc;
+}
+
+static void __exit sh_pfc_gpio_exit(void)
+{
+ platform_device_unregister(&sh_pfc_gpio_device);
+ platform_driver_unregister(&sh_pfc_gpio_driver);
+}
+
+module_init(sh_pfc_gpio_init);
+module_exit(sh_pfc_gpio_exit);
+
+MODULE_AUTHOR("Magnus Damm, Paul Mundt");
+MODULE_DESCRIPTION("GPIO driver for SuperH pin function controller");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:pfc-gpio");
diff --git a/drivers/sh/pfc/pinctrl.c b/drivers/sh/pfc/pinctrl.c
new file mode 100644
index 0000000..0802b6c
--- /dev/null
+++ b/drivers/sh/pfc/pinctrl.c
@@ -0,0 +1,530 @@
+/*
+ * SuperH Pin Function Controller pinmux support.
+ *
+ * Copyright (C) 2012 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define DRV_NAME "pinctrl-sh_pfc"
+
+#define pr_fmt(fmt) DRV_NAME " " KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sh_pfc.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf-generic.h>
+
+struct sh_pfc_pinctrl {
+ struct pinctrl_dev *pctl;
+ struct sh_pfc *pfc;
+
+ struct pinmux_gpio **functions;
+ unsigned int nr_functions;
+
+ struct pinctrl_pin_desc *pads;
+ unsigned int nr_pads;
+
+ spinlock_t lock;
+};
+
+static struct sh_pfc_pinctrl *sh_pfc_pmx;
+
+static int sh_pfc_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev);
+
+ return pmx->nr_pads;
+}
+
+static const char *sh_pfc_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev);
+
+ return pmx->pads[selector].name;
+}
+
+static int sh_pfc_get_group_pins(struct pinctrl_dev *pctldev, unsigned group,
+ const unsigned **pins, unsigned *num_pins)
+{
+ struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev);
+
+ *pins = &pmx->pads[group].number;
+ *num_pins = 1;
+
+ return 0;
+}
+
+static void sh_pfc_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
+ unsigned offset)
+{
+ seq_printf(s, "%s", DRV_NAME);
+}
+
+static struct pinctrl_ops sh_pfc_pinctrl_ops = {
+ .get_groups_count = sh_pfc_get_groups_count,
+ .get_group_name = sh_pfc_get_group_name,
+ .get_group_pins = sh_pfc_get_group_pins,
+ .pin_dbg_show = sh_pfc_pin_dbg_show,
+};
+
+static int sh_pfc_get_functions_count(struct pinctrl_dev *pctldev)
+{
+ struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev);
+
+ return pmx->nr_functions;
+}
+
+static const char *sh_pfc_get_function_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev);
+
+ return pmx->functions[selector]->name;
+}
+
+static int sh_pfc_get_function_groups(struct pinctrl_dev *pctldev, unsigned func,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev);
+
+ *groups = &pmx->functions[func]->name;
+ *num_groups = 1;
+
+ return 0;
+}
+
+static int sh_pfc_noop_enable(struct pinctrl_dev *pctldev, unsigned func,
+ unsigned group)
+{
+ return 0;
+}
+
+static void sh_pfc_noop_disable(struct pinctrl_dev *pctldev, unsigned func,
+ unsigned group)
+{
+}
+
+static inline int sh_pfc_config_function(struct sh_pfc *pfc, unsigned offset)
+{
+ if (sh_pfc_config_gpio(pfc, offset,
+ PINMUX_TYPE_FUNCTION,
+ GPIO_CFG_DRYRUN) != 0)
+ return -EINVAL;
+
+ if (sh_pfc_config_gpio(pfc, offset,
+ PINMUX_TYPE_FUNCTION,
+ GPIO_CFG_REQ) != 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int sh_pfc_reconfig_pin(struct sh_pfc *pfc, unsigned offset,
+ int new_type)
+{
+ unsigned long flags;
+ int pinmux_type;
+ int ret = -EINVAL;
+
+ spin_lock_irqsave(&pfc->lock, flags);
+
+ pinmux_type = pfc->gpios[offset].flags & PINMUX_FLAG_TYPE;
+
+ /*
+ * See if the present config needs to first be de-configured.
+ */
+ switch (pinmux_type) {
+ case PINMUX_TYPE_GPIO:
+ break;
+ case PINMUX_TYPE_OUTPUT:
+ case PINMUX_TYPE_INPUT:
+ case PINMUX_TYPE_INPUT_PULLUP:
+ case PINMUX_TYPE_INPUT_PULLDOWN:
+ sh_pfc_config_gpio(pfc, offset, pinmux_type, GPIO_CFG_FREE);
+ break;
+ default:
+ goto err;
+ }
+
+ /*
+ * Dry run
+ */
+ if (sh_pfc_config_gpio(pfc, offset, new_type,
+ GPIO_CFG_DRYRUN) != 0)
+ goto err;
+
+ /*
+ * Request
+ */
+ if (sh_pfc_config_gpio(pfc, offset, new_type,
+ GPIO_CFG_REQ) != 0)
+ goto err;
+
+ pfc->gpios[offset].flags &= ~PINMUX_FLAG_TYPE;
+ pfc->gpios[offset].flags |= new_type;
+
+ ret = 0;
+
+err:
+ spin_unlock_irqrestore(&pfc->lock, flags);
+
+ return ret;
+}
+
+
+static int sh_pfc_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev);
+ struct sh_pfc *pfc = pmx->pfc;
+ unsigned long flags;
+ int ret, pinmux_type;
+
+ spin_lock_irqsave(&pfc->lock, flags);
+
+ pinmux_type = pfc->gpios[offset].flags & PINMUX_FLAG_TYPE;
+
+ switch (pinmux_type) {
+ case PINMUX_TYPE_FUNCTION:
+ pr_notice_once("Use of GPIO API for function requests is "
+ "deprecated, convert to pinctrl\n");
+ /* handle for now */
+ ret = sh_pfc_config_function(pfc, offset);
+ if (unlikely(ret < 0))
+ goto err;
+
+ break;
+ case PINMUX_TYPE_GPIO:
+ break;
+ default:
+ pr_err("Unsupported mux type (%d), bailing...\n", pinmux_type);
+ return -ENOTSUPP;
+ }
+
+ ret = 0;
+
+err:
+ spin_unlock_irqrestore(&pfc->lock, flags);
+
+ return ret;
+}
+
+static void sh_pfc_gpio_disable_free(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev);
+ struct sh_pfc *pfc = pmx->pfc;
+ unsigned long flags;
+ int pinmux_type;
+
+ spin_lock_irqsave(&pfc->lock, flags);
+
+ pinmux_type = pfc->gpios[offset].flags & PINMUX_FLAG_TYPE;
+
+ sh_pfc_config_gpio(pfc, offset, pinmux_type, GPIO_CFG_FREE);
+
+ spin_unlock_irqrestore(&pfc->lock, flags);
+}
+
+static int sh_pfc_gpio_set_direction(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset, bool input)
+{
+ struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev);
+ int type = input ? PINMUX_TYPE_INPUT : PINMUX_TYPE_OUTPUT;
+
+ return sh_pfc_reconfig_pin(pmx->pfc, offset, type);
+}
+
+static struct pinmux_ops sh_pfc_pinmux_ops = {
+ .get_functions_count = sh_pfc_get_functions_count,
+ .get_function_name = sh_pfc_get_function_name,
+ .get_function_groups = sh_pfc_get_function_groups,
+ .enable = sh_pfc_noop_enable,
+ .disable = sh_pfc_noop_disable,
+ .gpio_request_enable = sh_pfc_gpio_request_enable,
+ .gpio_disable_free = sh_pfc_gpio_disable_free,
+ .gpio_set_direction = sh_pfc_gpio_set_direction,
+};
+
+static int sh_pfc_pinconf_get(struct pinctrl_dev *pctldev, unsigned pin,
+ unsigned long *config)
+{
+ struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev);
+ struct sh_pfc *pfc = pmx->pfc;
+
+ *config = pfc->gpios[pin].flags & PINMUX_FLAG_TYPE;
+
+ return 0;
+}
+
+static int sh_pfc_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin,
+ unsigned long config)
+{
+ struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev);
+ struct sh_pfc *pfc = pmx->pfc;
+
+ /* Validate the new type */
+ if (config >= PINMUX_FLAG_TYPE)
+ return -EINVAL;
+
+ return sh_pfc_reconfig_pin(pmx->pfc, pin, config);
+}
+
+static void sh_pfc_pinconf_dbg_show(struct pinctrl_dev *pctldev,
+ struct seq_file *s, unsigned pin)
+{
+ const char *pinmux_type_str[] = {
+ [PINMUX_TYPE_NONE] = "none",
+ [PINMUX_TYPE_FUNCTION] = "function",
+ [PINMUX_TYPE_GPIO] = "gpio",
+ [PINMUX_TYPE_OUTPUT] = "output",
+ [PINMUX_TYPE_INPUT] = "input",
+ [PINMUX_TYPE_INPUT_PULLUP] = "input bias pull up",
+ [PINMUX_TYPE_INPUT_PULLDOWN] = "input bias pull down",
+ };
+ unsigned long config;
+ int rc;
+
+ rc = sh_pfc_pinconf_get(pctldev, pin, &config);
+ if (unlikely(rc != 0))
+ return;
+
+ seq_printf(s, " %s", pinmux_type_str[config]);
+}
+
+static struct pinconf_ops sh_pfc_pinconf_ops = {
+ .pin_config_get = sh_pfc_pinconf_get,
+ .pin_config_set = sh_pfc_pinconf_set,
+ .pin_config_dbg_show = sh_pfc_pinconf_dbg_show,
+};
+
+static struct pinctrl_gpio_range sh_pfc_gpio_range = {
+ .name = DRV_NAME,
+ .id = 0,
+};
+
+static struct pinctrl_desc sh_pfc_pinctrl_desc = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .pctlops = &sh_pfc_pinctrl_ops,
+ .pmxops = &sh_pfc_pinmux_ops,
+ .confops = &sh_pfc_pinconf_ops,
+};
+
+int sh_pfc_register_pinctrl(struct sh_pfc *pfc)
+{
+ sh_pfc_pmx = kzalloc(sizeof(struct sh_pfc_pinctrl), GFP_KERNEL);
+ if (unlikely(!sh_pfc_pmx))
+ return -ENOMEM;
+
+ spin_lock_init(&sh_pfc_pmx->lock);
+
+ sh_pfc_pmx->pfc = pfc;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(sh_pfc_register_pinctrl);
+
+static inline void __devinit sh_pfc_map_one_gpio(struct sh_pfc *pfc,
+ struct sh_pfc_pinctrl *pmx,
+ struct pinmux_gpio *gpio,
+ unsigned offset)
+{
+ struct pinmux_data_reg *dummy;
+ unsigned long flags;
+ int bit;
+
+ gpio->flags &= ~PINMUX_FLAG_TYPE;
+
+ if (sh_pfc_get_data_reg(pfc, offset, &dummy, &bit) == 0)
+ gpio->flags |= PINMUX_TYPE_GPIO;
+ else {
+ gpio->flags |= PINMUX_TYPE_FUNCTION;
+
+ spin_lock_irqsave(&pmx->lock, flags);
+ pmx->nr_functions++;
+ spin_unlock_irqrestore(&pmx->lock, flags);
+ }
+}
+
+/* pinmux ranges -> pinctrl pin descs */
+static int __devinit sh_pfc_map_gpios(struct sh_pfc *pfc,
+ struct sh_pfc_pinctrl *pmx)
+{
+ unsigned long flags;
+ int i;
+
+ pmx->nr_pads = pfc->last_gpio - pfc->first_gpio + 1;
+
+ pmx->pads = kmalloc(sizeof(struct pinctrl_pin_desc) * pmx->nr_pads,
+ GFP_KERNEL);
+ if (unlikely(!pmx->pads)) {
+ pmx->nr_pads = 0;
+ return -ENOMEM;
+ }
+
+ spin_lock_irqsave(&pfc->lock, flags);
+
+ /*
+ * We don't necessarily have a 1:1 mapping between pin and linux
+ * GPIO number, as the latter maps to the associated enum_id.
+ * Care needs to be taken to translate back to pin space when
+ * dealing with any pin configurations.
+ */
+ for (i = 0; i < pmx->nr_pads; i++) {
+ struct pinctrl_pin_desc *pin = pmx->pads + i;
+ struct pinmux_gpio *gpio = pfc->gpios + i;
+
+ pin->number = pfc->first_gpio + i;
+ pin->name = gpio->name;
+
+ /* XXX */
+ if (unlikely(!gpio->enum_id))
+ continue;
+
+ sh_pfc_map_one_gpio(pfc, pmx, gpio, i);
+ }
+
+ spin_unlock_irqrestore(&pfc->lock, flags);
+
+ sh_pfc_pinctrl_desc.pins = pmx->pads;
+ sh_pfc_pinctrl_desc.npins = pmx->nr_pads;
+
+ return 0;
+}
+
+static int __devinit sh_pfc_map_functions(struct sh_pfc *pfc,
+ struct sh_pfc_pinctrl *pmx)
+{
+ unsigned long flags;
+ int i, fn;
+
+ pmx->functions = kzalloc(pmx->nr_functions * sizeof(void *),
+ GFP_KERNEL);
+ if (unlikely(!pmx->functions))
+ return -ENOMEM;
+
+ spin_lock_irqsave(&pmx->lock, flags);
+
+ for (i = fn = 0; i < pmx->nr_pads; i++) {
+ struct pinmux_gpio *gpio = pfc->gpios + i;
+
+ if ((gpio->flags & PINMUX_FLAG_TYPE) == PINMUX_TYPE_FUNCTION)
+ pmx->functions[fn++] = gpio;
+ }
+
+ spin_unlock_irqrestore(&pmx->lock, flags);
+
+ return 0;
+}
+
+static int __devinit sh_pfc_pinctrl_probe(struct platform_device *pdev)
+{
+ struct sh_pfc *pfc;
+ int ret;
+
+ if (unlikely(!sh_pfc_pmx))
+ return -ENODEV;
+
+ pfc = sh_pfc_pmx->pfc;
+
+ ret = sh_pfc_map_gpios(pfc, sh_pfc_pmx);
+ if (unlikely(ret != 0))
+ return ret;
+
+ ret = sh_pfc_map_functions(pfc, sh_pfc_pmx);
+ if (unlikely(ret != 0))
+ goto free_pads;
+
+ sh_pfc_pmx->pctl = pinctrl_register(&sh_pfc_pinctrl_desc, &pdev->dev,
+ sh_pfc_pmx);
+ if (IS_ERR(sh_pfc_pmx->pctl)) {
+ ret = PTR_ERR(sh_pfc_pmx->pctl);
+ goto free_functions;
+ }
+
+ sh_pfc_gpio_range.npins = pfc->last_gpio - pfc->first_gpio + 1;
+ sh_pfc_gpio_range.base = pfc->first_gpio;
+ sh_pfc_gpio_range.pin_base = pfc->first_gpio;
+
+ pinctrl_add_gpio_range(sh_pfc_pmx->pctl, &sh_pfc_gpio_range);
+
+ platform_set_drvdata(pdev, sh_pfc_pmx);
+
+ return 0;
+
+free_functions:
+ kfree(sh_pfc_pmx->functions);
+free_pads:
+ kfree(sh_pfc_pmx->pads);
+ kfree(sh_pfc_pmx);
+
+ return ret;
+}
+
+static int __devexit sh_pfc_pinctrl_remove(struct platform_device *pdev)
+{
+ struct sh_pfc_pinctrl *pmx = platform_get_drvdata(pdev);
+
+ pinctrl_remove_gpio_range(pmx->pctl, &sh_pfc_gpio_range);
+ pinctrl_unregister(pmx->pctl);
+
+ platform_set_drvdata(pdev, NULL);
+
+ kfree(sh_pfc_pmx->functions);
+ kfree(sh_pfc_pmx->pads);
+ kfree(sh_pfc_pmx);
+
+ return 0;
+}
+
+static struct platform_driver sh_pfc_pinctrl_driver = {
+ .probe = sh_pfc_pinctrl_probe,
+ .remove = __devexit_p(sh_pfc_pinctrl_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static struct platform_device sh_pfc_pinctrl_device = {
+ .name = DRV_NAME,
+ .id = -1,
+};
+
+static int __init sh_pfc_pinctrl_init(void)
+{
+ int rc;
+
+ rc = platform_driver_register(&sh_pfc_pinctrl_driver);
+ if (likely(!rc)) {
+ rc = platform_device_register(&sh_pfc_pinctrl_device);
+ if (unlikely(rc))
+ platform_driver_unregister(&sh_pfc_pinctrl_driver);
+ }
+
+ return rc;
+}
+
+static void __exit sh_pfc_pinctrl_exit(void)
+{
+ platform_driver_unregister(&sh_pfc_pinctrl_driver);
+}
+
+subsys_initcall(sh_pfc_pinctrl_init);
+module_exit(sh_pfc_pinctrl_exit);
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 46ef5fe..0c73dd4 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -801,7 +801,7 @@
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
if (!cs) {
- cs = devm_kzalloc(&spi->dev , sizeof *cs, GFP_KERNEL);
+ cs = kzalloc(sizeof *cs, GFP_KERNEL);
if (!cs)
return -ENOMEM;
cs->base = mcspi->base + spi->chip_select * 0x14;
@@ -842,6 +842,7 @@
cs = spi->controller_state;
list_del(&cs->node);
+ kfree(cs);
}
if (spi->chip_select < spi->master->num_chipselect) {
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 972a94c..646a765 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -27,10 +27,15 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/spi/spi.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <mach/dma.h>
#include <plat/s3c64xx-spi.h>
+#define MAX_SPI_PORTS 3
+
/* Registers and bit-fields */
#define S3C64XX_SPI_CH_CFG 0x00
@@ -74,11 +79,6 @@
#define S3C64XX_SPI_SLAVE_AUTO (1<<1)
#define S3C64XX_SPI_SLAVE_SIG_INACT (1<<0)
-#define S3C64XX_SPI_ACT(c) writel(0, (c)->regs + S3C64XX_SPI_SLAVE_SEL)
-
-#define S3C64XX_SPI_DEACT(c) writel(S3C64XX_SPI_SLAVE_SIG_INACT, \
- (c)->regs + S3C64XX_SPI_SLAVE_SEL)
-
#define S3C64XX_SPI_INT_TRAILING_EN (1<<6)
#define S3C64XX_SPI_INT_RX_OVERRUN_EN (1<<5)
#define S3C64XX_SPI_INT_RX_UNDERRUN_EN (1<<4)
@@ -113,13 +113,12 @@
#define S3C64XX_SPI_FBCLK_MSK (3<<0)
-#define S3C64XX_SPI_ST_TRLCNTZ(v, i) ((((v) >> (i)->rx_lvl_offset) & \
- (((i)->fifo_lvl_mask + 1))) \
- ? 1 : 0)
-
-#define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & (1 << (i)->tx_st_done)) ? 1 : 0)
-#define TX_FIFO_LVL(v, i) (((v) >> 6) & (i)->fifo_lvl_mask)
-#define RX_FIFO_LVL(v, i) (((v) >> (i)->rx_lvl_offset) & (i)->fifo_lvl_mask)
+#define FIFO_LVL_MASK(i) ((i)->port_conf->fifo_lvl_mask[i->port_id])
+#define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & \
+ (1 << (i)->port_conf->tx_st_done)) ? 1 : 0)
+#define TX_FIFO_LVL(v, i) (((v) >> 6) & FIFO_LVL_MASK(i))
+#define RX_FIFO_LVL(v, i) (((v) >> (i)->port_conf->rx_lvl_offset) & \
+ FIFO_LVL_MASK(i))
#define S3C64XX_SPI_MAX_TRAILCNT 0x3ff
#define S3C64XX_SPI_TRAILCNT_OFF 19
@@ -135,6 +134,29 @@
unsigned ch;
enum dma_data_direction direction;
enum dma_ch dmach;
+ struct property *dma_prop;
+};
+
+/**
+ * struct s3c64xx_spi_info - SPI Controller hardware info
+ * @fifo_lvl_mask: Bit-mask for {TX|RX}_FIFO_LVL bits in SPI_STATUS register.
+ * @rx_lvl_offset: Bit offset of RX_FIFO_LVL bits in SPI_STATUS regiter.
+ * @tx_st_done: Bit offset of TX_DONE bit in SPI_STATUS regiter.
+ * @high_speed: True, if the controller supports HIGH_SPEED_EN bit.
+ * @clk_from_cmu: True, if the controller does not include a clock mux and
+ * prescaler unit.
+ *
+ * The Samsung s3c64xx SPI controller are used on various Samsung SoC's but
+ * differ in some aspects such as the size of the fifo and spi bus clock
+ * setup. Such differences are specified to the driver using this structure
+ * which is provided as driver data to the driver.
+ */
+struct s3c64xx_spi_port_config {
+ int fifo_lvl_mask[MAX_SPI_PORTS];
+ int rx_lvl_offset;
+ int tx_st_done;
+ bool high_speed;
+ bool clk_from_cmu;
};
/**
@@ -175,6 +197,9 @@
struct s3c64xx_spi_dma_data rx_dma;
struct s3c64xx_spi_dma_data tx_dma;
struct samsung_dma_ops *ops;
+ struct s3c64xx_spi_port_config *port_conf;
+ unsigned int port_id;
+ unsigned long gpios[4];
};
static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
@@ -183,7 +208,6 @@
static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
{
- struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
void __iomem *regs = sdd->regs;
unsigned long loops;
u32 val;
@@ -199,7 +223,7 @@
loops = msecs_to_loops(1);
do {
val = readl(regs + S3C64XX_SPI_STATUS);
- } while (TX_FIFO_LVL(val, sci) && loops--);
+ } while (TX_FIFO_LVL(val, sdd) && loops--);
if (loops == 0)
dev_warn(&sdd->pdev->dev, "Timed out flushing TX FIFO\n");
@@ -208,7 +232,7 @@
loops = msecs_to_loops(1);
do {
val = readl(regs + S3C64XX_SPI_STATUS);
- if (RX_FIFO_LVL(val, sci))
+ if (RX_FIFO_LVL(val, sdd))
readl(regs + S3C64XX_SPI_RX_DATA);
else
break;
@@ -262,14 +286,24 @@
unsigned len, dma_addr_t buf)
{
struct s3c64xx_spi_driver_data *sdd;
- struct samsung_dma_prep_info info;
+ struct samsung_dma_prep info;
+ struct samsung_dma_config config;
- if (dma->direction == DMA_DEV_TO_MEM)
+ if (dma->direction == DMA_DEV_TO_MEM) {
sdd = container_of((void *)dma,
struct s3c64xx_spi_driver_data, rx_dma);
- else
+ config.direction = sdd->rx_dma.direction;
+ config.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA;
+ config.width = sdd->cur_bpw / 8;
+ sdd->ops->config(sdd->rx_dma.ch, &config);
+ } else {
sdd = container_of((void *)dma,
struct s3c64xx_spi_driver_data, tx_dma);
+ config.direction = sdd->tx_dma.direction;
+ config.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA;
+ config.width = sdd->cur_bpw / 8;
+ sdd->ops->config(sdd->tx_dma.ch, &config);
+ }
info.cap = DMA_SLAVE;
info.len = len;
@@ -284,20 +318,17 @@
static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
{
- struct samsung_dma_info info;
+ struct samsung_dma_req req;
sdd->ops = samsung_dma_get_ops();
- info.cap = DMA_SLAVE;
- info.client = &s3c64xx_spi_dma_client;
- info.width = sdd->cur_bpw / 8;
+ req.cap = DMA_SLAVE;
+ req.client = &s3c64xx_spi_dma_client;
- info.direction = sdd->rx_dma.direction;
- info.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA;
- sdd->rx_dma.ch = sdd->ops->request(sdd->rx_dma.dmach, &info);
- info.direction = sdd->tx_dma.direction;
- info.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA;
- sdd->tx_dma.ch = sdd->ops->request(sdd->tx_dma.dmach, &info);
+ req.dt_dmach_prop = sdd->rx_dma.dma_prop;
+ sdd->rx_dma.ch = sdd->ops->request(sdd->rx_dma.dmach, &req);
+ req.dt_dmach_prop = sdd->tx_dma.dma_prop;
+ sdd->tx_dma.ch = sdd->ops->request(sdd->tx_dma.dmach, &req);
return 1;
}
@@ -306,7 +337,6 @@
struct spi_device *spi,
struct spi_transfer *xfer, int dma_mode)
{
- struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
void __iomem *regs = sdd->regs;
u32 modecfg, chcfg;
@@ -356,7 +386,7 @@
if (xfer->rx_buf != NULL) {
sdd->state |= RXBUSY;
- if (sci->high_speed && sdd->cur_speed >= 30000000UL
+ if (sdd->port_conf->high_speed && sdd->cur_speed >= 30000000UL
&& !(sdd->cur_mode & SPI_CPHA))
chcfg |= S3C64XX_SPI_CH_HS_EN;
@@ -383,20 +413,19 @@
if (sdd->tgl_spi != spi) { /* if last mssg on diff device */
/* Deselect the last toggled device */
cs = sdd->tgl_spi->controller_data;
- cs->set_level(cs->line,
- spi->mode & SPI_CS_HIGH ? 0 : 1);
+ gpio_set_value(cs->line,
+ spi->mode & SPI_CS_HIGH ? 0 : 1);
}
sdd->tgl_spi = NULL;
}
cs = spi->controller_data;
- cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0);
+ gpio_set_value(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0);
}
static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd,
struct spi_transfer *xfer, int dma_mode)
{
- struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
void __iomem *regs = sdd->regs;
unsigned long val;
int ms;
@@ -413,7 +442,7 @@
val = msecs_to_loops(ms);
do {
status = readl(regs + S3C64XX_SPI_STATUS);
- } while (RX_FIFO_LVL(status, sci) < xfer->len && --val);
+ } while (RX_FIFO_LVL(status, sdd) < xfer->len && --val);
}
if (!val)
@@ -432,8 +461,8 @@
if (xfer->rx_buf == NULL) {
val = msecs_to_loops(10);
status = readl(regs + S3C64XX_SPI_STATUS);
- while ((TX_FIFO_LVL(status, sci)
- || !S3C64XX_SPI_ST_TX_DONE(status, sci))
+ while ((TX_FIFO_LVL(status, sdd)
+ || !S3C64XX_SPI_ST_TX_DONE(status, sdd))
&& --val) {
cpu_relax();
status = readl(regs + S3C64XX_SPI_STATUS);
@@ -477,17 +506,16 @@
if (sdd->tgl_spi == spi)
sdd->tgl_spi = NULL;
- cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1);
+ gpio_set_value(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1);
}
static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
{
- struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
void __iomem *regs = sdd->regs;
u32 val;
/* Disable Clock */
- if (sci->clk_from_cmu) {
+ if (sdd->port_conf->clk_from_cmu) {
clk_disable(sdd->src_clk);
} else {
val = readl(regs + S3C64XX_SPI_CLK_CFG);
@@ -531,7 +559,7 @@
writel(val, regs + S3C64XX_SPI_MODE_CFG);
- if (sci->clk_from_cmu) {
+ if (sdd->port_conf->clk_from_cmu) {
/* Configure Clock */
/* There is half-multiplier before the SPI */
clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
@@ -557,7 +585,6 @@
static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
struct spi_message *msg)
{
- struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
struct device *dev = &sdd->pdev->dev;
struct spi_transfer *xfer;
@@ -573,7 +600,7 @@
/* Map until end or first fail */
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
- if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1))
+ if (xfer->len <= ((FIFO_LVL_MASK(sdd) >> 1) + 1))
continue;
if (xfer->tx_buf != NULL) {
@@ -607,7 +634,6 @@
static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd,
struct spi_message *msg)
{
- struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
struct device *dev = &sdd->pdev->dev;
struct spi_transfer *xfer;
@@ -616,7 +642,7 @@
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
- if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1))
+ if (xfer->len <= ((FIFO_LVL_MASK(sdd) >> 1) + 1))
continue;
if (xfer->rx_buf != NULL
@@ -635,7 +661,6 @@
struct spi_message *msg)
{
struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
- struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
struct spi_device *spi = msg->spi;
struct s3c64xx_spi_csinfo *cs = spi->controller_data;
struct spi_transfer *xfer;
@@ -690,7 +715,7 @@
}
/* Polling method for xfers not bigger than FIFO capacity */
- if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1))
+ if (xfer->len <= ((FIFO_LVL_MASK(sdd) >> 1) + 1))
use_dma = 0;
else
use_dma = 1;
@@ -707,14 +732,15 @@
enable_cs(sdd, spi);
/* Start the signals */
- S3C64XX_SPI_ACT(sdd);
+ writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
spin_unlock_irqrestore(&sdd->lock, flags);
status = wait_for_xfer(sdd, xfer, use_dma);
/* Quiese the signals */
- S3C64XX_SPI_DEACT(sdd);
+ writel(S3C64XX_SPI_SLAVE_SIG_INACT,
+ sdd->regs + S3C64XX_SPI_SLAVE_SEL);
if (status) {
dev_err(&spi->dev, "I/O Error: "
@@ -795,6 +821,48 @@
return 0;
}
+static struct s3c64xx_spi_csinfo *s3c64xx_get_slave_ctrldata(
+ struct s3c64xx_spi_driver_data *sdd,
+ struct spi_device *spi)
+{
+ struct s3c64xx_spi_csinfo *cs;
+ struct device_node *slave_np, *data_np;
+ u32 fb_delay = 0;
+
+ slave_np = spi->dev.of_node;
+ if (!slave_np) {
+ dev_err(&spi->dev, "device node not found\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ for_each_child_of_node(slave_np, data_np)
+ if (!strcmp(data_np->name, "controller-data"))
+ break;
+ if (!data_np) {
+ dev_err(&spi->dev, "child node 'controller-data' not found\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ cs = kzalloc(sizeof(*cs), GFP_KERNEL);
+ if (!cs) {
+ dev_err(&spi->dev, "could not allocate memory for controller"
+ " data\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ cs->line = of_get_named_gpio(data_np, "cs-gpio", 0);
+ if (!gpio_is_valid(cs->line)) {
+ dev_err(&spi->dev, "chip select gpio is not specified or "
+ "invalid\n");
+ kfree(cs);
+ return ERR_PTR(-EINVAL);
+ }
+
+ of_property_read_u32(data_np, "samsung,spi-feedback-delay", &fb_delay);
+ cs->fb_delay = fb_delay;
+ return cs;
+}
+
/*
* Here we only check the validity of requested configuration
* and save the configuration in a local data-structure.
@@ -808,14 +876,31 @@
struct s3c64xx_spi_info *sci;
struct spi_message *msg;
unsigned long flags;
- int err = 0;
+ int err;
- if (cs == NULL || cs->set_level == NULL) {
+ sdd = spi_master_get_devdata(spi->master);
+ if (!cs && spi->dev.of_node) {
+ cs = s3c64xx_get_slave_ctrldata(sdd, spi);
+ spi->controller_data = cs;
+ }
+
+ if (IS_ERR_OR_NULL(cs)) {
dev_err(&spi->dev, "No CS for SPI(%d)\n", spi->chip_select);
return -ENODEV;
}
- sdd = spi_master_get_devdata(spi->master);
+ if (!spi_get_ctldata(spi)) {
+ err = gpio_request_one(cs->line, GPIOF_OUT_INIT_HIGH,
+ dev_name(&spi->dev));
+ if (err) {
+ dev_err(&spi->dev,
+ "Failed to get /CS gpio [%d]: %d\n",
+ cs->line, err);
+ goto err_gpio_req;
+ }
+ spi_set_ctldata(spi, cs);
+ }
+
sci = sdd->cntrlr_info;
spin_lock_irqsave(&sdd->lock, flags);
@@ -826,7 +911,8 @@
dev_err(&spi->dev,
"setup: attempt while mssg in queue!\n");
spin_unlock_irqrestore(&sdd->lock, flags);
- return -EBUSY;
+ err = -EBUSY;
+ goto err_msgq;
}
}
@@ -844,7 +930,7 @@
pm_runtime_get_sync(&sdd->pdev->dev);
/* Check if we can provide the requested rate */
- if (!sci->clk_from_cmu) {
+ if (!sdd->port_conf->clk_from_cmu) {
u32 psr, speed;
/* Max possible */
@@ -869,22 +955,44 @@
}
speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1);
- if (spi->max_speed_hz >= speed)
+ if (spi->max_speed_hz >= speed) {
spi->max_speed_hz = speed;
- else
+ } else {
err = -EINVAL;
+ goto setup_exit;
+ }
}
pm_runtime_put(&sdd->pdev->dev);
+ disable_cs(sdd, spi);
+ return 0;
setup_exit:
-
/* setup() returns with device de-selected */
disable_cs(sdd, spi);
+err_msgq:
+ gpio_free(cs->line);
+ spi_set_ctldata(spi, NULL);
+
+err_gpio_req:
+ kfree(cs);
+
return err;
}
+static void s3c64xx_spi_cleanup(struct spi_device *spi)
+{
+ struct s3c64xx_spi_csinfo *cs = spi_get_ctldata(spi);
+
+ if (cs) {
+ gpio_free(cs->line);
+ if (spi->dev.of_node)
+ kfree(cs);
+ }
+ spi_set_ctldata(spi, NULL);
+}
+
static irqreturn_t s3c64xx_spi_irq(int irq, void *data)
{
struct s3c64xx_spi_driver_data *sdd = data;
@@ -920,12 +1028,12 @@
sdd->cur_speed = 0;
- S3C64XX_SPI_DEACT(sdd);
+ writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
/* Disable Interrupts - we use Polling if not DMA mode */
writel(0, regs + S3C64XX_SPI_INT_EN);
- if (!sci->clk_from_cmu)
+ if (!sdd->port_conf->clk_from_cmu)
writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT,
regs + S3C64XX_SPI_CLK_CFG);
writel(0, regs + S3C64XX_SPI_MODE_CFG);
@@ -946,42 +1054,167 @@
flush_fifo(sdd);
}
+static int __devinit s3c64xx_spi_get_dmares(
+ struct s3c64xx_spi_driver_data *sdd, bool tx)
+{
+ struct platform_device *pdev = sdd->pdev;
+ struct s3c64xx_spi_dma_data *dma_data;
+ struct property *prop;
+ struct resource *res;
+ char prop_name[15], *chan_str;
+
+ if (tx) {
+ dma_data = &sdd->tx_dma;
+ dma_data->direction = DMA_TO_DEVICE;
+ chan_str = "tx";
+ } else {
+ dma_data = &sdd->rx_dma;
+ dma_data->direction = DMA_FROM_DEVICE;
+ chan_str = "rx";
+ }
+
+ if (!sdd->pdev->dev.of_node) {
+ res = platform_get_resource(pdev, IORESOURCE_DMA, tx ? 0 : 1);
+ if (!res) {
+ dev_err(&pdev->dev, "Unable to get SPI-%s dma "
+ "resource\n", chan_str);
+ return -ENXIO;
+ }
+ dma_data->dmach = res->start;
+ return 0;
+ }
+
+ sprintf(prop_name, "%s-dma-channel", chan_str);
+ prop = of_find_property(pdev->dev.of_node, prop_name, NULL);
+ if (!prop) {
+ dev_err(&pdev->dev, "%s dma channel property not specified\n",
+ chan_str);
+ return -ENXIO;
+ }
+
+ dma_data->dmach = DMACH_DT_PROP;
+ dma_data->dma_prop = prop;
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static int s3c64xx_spi_parse_dt_gpio(struct s3c64xx_spi_driver_data *sdd)
+{
+ struct device *dev = &sdd->pdev->dev;
+ int idx, gpio, ret;
+
+ /* find gpios for mosi, miso and clock lines */
+ for (idx = 0; idx < 3; idx++) {
+ gpio = of_get_gpio(dev->of_node, idx);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(dev, "invalid gpio[%d]: %d\n", idx, gpio);
+ goto free_gpio;
+ }
+
+ ret = gpio_request(gpio, "spi-bus");
+ if (ret) {
+ dev_err(dev, "gpio [%d] request failed: %d\n",
+ gpio, ret);
+ goto free_gpio;
+ }
+ }
+ return 0;
+
+free_gpio:
+ while (--idx >= 0)
+ gpio_free(sdd->gpios[idx]);
+ return -EINVAL;
+}
+
+static void s3c64xx_spi_dt_gpio_free(struct s3c64xx_spi_driver_data *sdd)
+{
+ unsigned int idx;
+ for (idx = 0; idx < 3; idx++)
+ gpio_free(sdd->gpios[idx]);
+}
+
+static struct __devinit s3c64xx_spi_info * s3c64xx_spi_parse_dt(
+ struct device *dev)
+{
+ struct s3c64xx_spi_info *sci;
+ u32 temp;
+
+ sci = devm_kzalloc(dev, sizeof(*sci), GFP_KERNEL);
+ if (!sci) {
+ dev_err(dev, "memory allocation for spi_info failed\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ if (of_property_read_u32(dev->of_node, "samsung,spi-src-clk", &temp)) {
+ dev_warn(dev, "spi bus clock parent not specified, using "
+ "clock at index 0 as parent\n");
+ sci->src_clk_nr = 0;
+ } else {
+ sci->src_clk_nr = temp;
+ }
+
+ if (of_property_read_u32(dev->of_node, "num-cs", &temp)) {
+ dev_warn(dev, "number of chip select lines not specified, "
+ "assuming 1 chip select line\n");
+ sci->num_cs = 1;
+ } else {
+ sci->num_cs = temp;
+ }
+
+ return sci;
+}
+#else
+static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev)
+{
+ return dev->platform_data;
+}
+
+static int s3c64xx_spi_parse_dt_gpio(struct s3c64xx_spi_driver_data *sdd)
+{
+ return -EINVAL;
+}
+
+static void s3c64xx_spi_dt_gpio_free(struct s3c64xx_spi_driver_data *sdd)
+{
+}
+#endif
+
+static const struct of_device_id s3c64xx_spi_dt_match[];
+
+static inline struct s3c64xx_spi_port_config *s3c64xx_spi_get_port_config(
+ struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(s3c64xx_spi_dt_match, pdev->dev.of_node);
+ return (struct s3c64xx_spi_port_config *)match->data;
+ }
+#endif
+ return (struct s3c64xx_spi_port_config *)
+ platform_get_device_id(pdev)->driver_data;
+}
+
static int __init s3c64xx_spi_probe(struct platform_device *pdev)
{
- struct resource *mem_res, *dmatx_res, *dmarx_res;
+ struct resource *mem_res;
struct s3c64xx_spi_driver_data *sdd;
- struct s3c64xx_spi_info *sci;
+ struct s3c64xx_spi_info *sci = pdev->dev.platform_data;
struct spi_master *master;
int ret, irq;
char clk_name[16];
- if (pdev->id < 0) {
- dev_err(&pdev->dev,
- "Invalid platform device id-%d\n", pdev->id);
- return -ENODEV;
+ if (!sci && pdev->dev.of_node) {
+ sci = s3c64xx_spi_parse_dt(&pdev->dev);
+ if (IS_ERR(sci))
+ return PTR_ERR(sci);
}
- if (pdev->dev.platform_data == NULL) {
+ if (!sci) {
dev_err(&pdev->dev, "platform_data missing!\n");
return -ENODEV;
}
- sci = pdev->dev.platform_data;
-
- /* Check for availability of necessary resource */
-
- dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (dmatx_res == NULL) {
- dev_err(&pdev->dev, "Unable to get SPI-Tx dma resource\n");
- return -ENXIO;
- }
-
- dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (dmarx_res == NULL) {
- dev_err(&pdev->dev, "Unable to get SPI-Rx dma resource\n");
- return -ENXIO;
- }
-
mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (mem_res == NULL) {
dev_err(&pdev->dev, "Unable to get SPI MEM resource\n");
@@ -1004,19 +1237,37 @@
platform_set_drvdata(pdev, master);
sdd = spi_master_get_devdata(master);
+ sdd->port_conf = s3c64xx_spi_get_port_config(pdev);
sdd->master = master;
sdd->cntrlr_info = sci;
sdd->pdev = pdev;
sdd->sfr_start = mem_res->start;
- sdd->tx_dma.dmach = dmatx_res->start;
- sdd->tx_dma.direction = DMA_MEM_TO_DEV;
- sdd->rx_dma.dmach = dmarx_res->start;
- sdd->rx_dma.direction = DMA_DEV_TO_MEM;
+ if (pdev->dev.of_node) {
+ ret = of_alias_get_id(pdev->dev.of_node, "spi");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to get alias id, "
+ "errno %d\n", ret);
+ goto err0;
+ }
+ sdd->port_id = ret;
+ } else {
+ sdd->port_id = pdev->id;
+ }
sdd->cur_bpw = 8;
- master->bus_num = pdev->id;
+ ret = s3c64xx_spi_get_dmares(sdd, true);
+ if (ret)
+ goto err0;
+
+ ret = s3c64xx_spi_get_dmares(sdd, false);
+ if (ret)
+ goto err0;
+
+ master->dev.of_node = pdev->dev.of_node;
+ master->bus_num = sdd->port_id;
master->setup = s3c64xx_spi_setup;
+ master->cleanup = s3c64xx_spi_cleanup;
master->prepare_transfer_hardware = s3c64xx_spi_prepare_transfer;
master->transfer_one_message = s3c64xx_spi_transfer_one_message;
master->unprepare_transfer_hardware = s3c64xx_spi_unprepare_transfer;
@@ -1025,21 +1276,17 @@
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
- if (request_mem_region(mem_res->start,
- resource_size(mem_res), pdev->name) == NULL) {
- dev_err(&pdev->dev, "Req mem region failed\n");
- ret = -ENXIO;
- goto err0;
- }
-
- sdd->regs = ioremap(mem_res->start, resource_size(mem_res));
+ sdd->regs = devm_request_and_ioremap(&pdev->dev, mem_res);
if (sdd->regs == NULL) {
dev_err(&pdev->dev, "Unable to remap IO\n");
ret = -ENXIO;
goto err1;
}
- if (sci->cfg_gpio == NULL || sci->cfg_gpio(pdev)) {
+ if (!sci->cfg_gpio && pdev->dev.of_node) {
+ if (s3c64xx_spi_parse_dt_gpio(sdd))
+ return -EBUSY;
+ } else if (sci->cfg_gpio == NULL || sci->cfg_gpio()) {
dev_err(&pdev->dev, "Unable to config gpio\n");
ret = -EBUSY;
goto err2;
@@ -1075,7 +1322,7 @@
}
/* Setup Deufult Mode */
- s3c64xx_spi_hwinit(sdd, pdev->id);
+ s3c64xx_spi_hwinit(sdd, sdd->port_id);
spin_lock_init(&sdd->lock);
init_completion(&sdd->xfer_completion);
@@ -1100,7 +1347,7 @@
dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d "
"with %d Slaves attached\n",
- pdev->id, master->num_chipselect);
+ sdd->port_id, master->num_chipselect);
dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n",
mem_res->end, mem_res->start,
sdd->rx_dma.dmach, sdd->tx_dma.dmach);
@@ -1120,10 +1367,10 @@
err4:
clk_put(sdd->clk);
err3:
+ if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node)
+ s3c64xx_spi_dt_gpio_free(sdd);
err2:
- iounmap((void *) sdd->regs);
err1:
- release_mem_region(mem_res->start, resource_size(mem_res));
err0:
platform_set_drvdata(pdev, NULL);
spi_master_put(master);
@@ -1135,7 +1382,6 @@
{
struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
- struct resource *mem_res;
pm_runtime_disable(&pdev->dev);
@@ -1151,11 +1397,8 @@
clk_disable(sdd->clk);
clk_put(sdd->clk);
- iounmap((void *) sdd->regs);
-
- mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (mem_res != NULL)
- release_mem_region(mem_res->start, resource_size(mem_res));
+ if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node)
+ s3c64xx_spi_dt_gpio_free(sdd);
platform_set_drvdata(pdev, NULL);
spi_master_put(master);
@@ -1175,6 +1418,9 @@
clk_disable(sdd->src_clk);
clk_disable(sdd->clk);
+ if (!sdd->cntrlr_info->cfg_gpio && dev->of_node)
+ s3c64xx_spi_dt_gpio_free(sdd);
+
sdd->cur_speed = 0; /* Output Clock is stopped */
return 0;
@@ -1182,18 +1428,20 @@
static int s3c64xx_spi_resume(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
- sci->cfg_gpio(pdev);
+ if (!sci->cfg_gpio && dev->of_node)
+ s3c64xx_spi_parse_dt_gpio(sdd);
+ else
+ sci->cfg_gpio();
/* Enable the clock */
clk_enable(sdd->src_clk);
clk_enable(sdd->clk);
- s3c64xx_spi_hwinit(sdd, pdev->id);
+ s3c64xx_spi_hwinit(sdd, sdd->port_id);
spi_master_resume(master);
@@ -1231,13 +1479,89 @@
s3c64xx_spi_runtime_resume, NULL)
};
+struct s3c64xx_spi_port_config s3c2443_spi_port_config = {
+ .fifo_lvl_mask = { 0x7f },
+ .rx_lvl_offset = 13,
+ .tx_st_done = 21,
+ .high_speed = true,
+};
+
+struct s3c64xx_spi_port_config s3c6410_spi_port_config = {
+ .fifo_lvl_mask = { 0x7f, 0x7F },
+ .rx_lvl_offset = 13,
+ .tx_st_done = 21,
+};
+
+struct s3c64xx_spi_port_config s5p64x0_spi_port_config = {
+ .fifo_lvl_mask = { 0x1ff, 0x7F },
+ .rx_lvl_offset = 15,
+ .tx_st_done = 25,
+};
+
+struct s3c64xx_spi_port_config s5pc100_spi_port_config = {
+ .fifo_lvl_mask = { 0x7f, 0x7F },
+ .rx_lvl_offset = 13,
+ .tx_st_done = 21,
+ .high_speed = true,
+};
+
+struct s3c64xx_spi_port_config s5pv210_spi_port_config = {
+ .fifo_lvl_mask = { 0x1ff, 0x7F },
+ .rx_lvl_offset = 15,
+ .tx_st_done = 25,
+ .high_speed = true,
+};
+
+struct s3c64xx_spi_port_config exynos4_spi_port_config = {
+ .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F },
+ .rx_lvl_offset = 15,
+ .tx_st_done = 25,
+ .high_speed = true,
+ .clk_from_cmu = true,
+};
+
+static struct platform_device_id s3c64xx_spi_driver_ids[] = {
+ {
+ .name = "s3c2443-spi",
+ .driver_data = (kernel_ulong_t)&s3c2443_spi_port_config,
+ }, {
+ .name = "s3c6410-spi",
+ .driver_data = (kernel_ulong_t)&s3c6410_spi_port_config,
+ }, {
+ .name = "s5p64x0-spi",
+ .driver_data = (kernel_ulong_t)&s5p64x0_spi_port_config,
+ }, {
+ .name = "s5pc100-spi",
+ .driver_data = (kernel_ulong_t)&s5pc100_spi_port_config,
+ }, {
+ .name = "s5pv210-spi",
+ .driver_data = (kernel_ulong_t)&s5pv210_spi_port_config,
+ }, {
+ .name = "exynos4210-spi",
+ .driver_data = (kernel_ulong_t)&exynos4_spi_port_config,
+ },
+ { },
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id s3c64xx_spi_dt_match[] = {
+ { .compatible = "samsung,exynos4210-spi",
+ .data = (void *)&exynos4_spi_port_config,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, s3c64xx_spi_dt_match);
+#endif /* CONFIG_OF */
+
static struct platform_driver s3c64xx_spi_driver = {
.driver = {
.name = "s3c64xx-spi",
.owner = THIS_MODULE,
.pm = &s3c64xx_spi_pm,
+ .of_match_table = of_match_ptr(s3c64xx_spi_dt_match),
},
.remove = s3c64xx_spi_remove,
+ .id_table = s3c64xx_spi_driver_ids,
};
MODULE_ALIAS("platform:s3c64xx-spi");
diff --git a/drivers/spi/spi-tegra.c b/drivers/spi/spi-tegra.c
index ae6d78a..7f99ff3 100644
--- a/drivers/spi/spi-tegra.c
+++ b/drivers/spi/spi-tegra.c
@@ -261,7 +261,7 @@
clk_set_rate(tspi->clk, speed);
if (tspi->cur_speed == 0)
- clk_enable(tspi->clk);
+ clk_prepare_enable(tspi->clk);
tspi->cur_speed = speed;
@@ -373,7 +373,7 @@
spi = m->state;
spi_tegra_start_message(spi, m);
} else {
- clk_disable(tspi->clk);
+ clk_disable_unprepare(tspi->clk);
tspi->cur_speed = 0;
}
}
diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c
index 1c3d638..aeac1ca 100644
--- a/drivers/staging/comedi/drivers.c
+++ b/drivers/staging/comedi/drivers.c
@@ -30,6 +30,7 @@
#include <linux/pci.h>
#include <linux/usb.h>
#include <linux/errno.h>
+#include <linux/kconfig.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/fcntl.h>
@@ -981,6 +982,8 @@
}
EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister);
+#if IS_ENABLED(CONFIG_USB)
+
static int comedi_old_usb_auto_config(struct usb_interface *intf,
struct comedi_driver *driver)
{
@@ -1043,3 +1046,5 @@
comedi_driver_unregister(comedi_driver);
}
EXPORT_SYMBOL_GPL(comedi_usb_driver_unregister);
+
+#endif
diff --git a/drivers/staging/gdm72xx/netlink_k.c b/drivers/staging/gdm72xx/netlink_k.c
index 292af0f..5166513 100644
--- a/drivers/staging/gdm72xx/netlink_k.c
+++ b/drivers/staging/gdm72xx/netlink_k.c
@@ -104,7 +104,7 @@
void netlink_exit(struct sock *sock)
{
- sock_release(sock->sk_socket);
+ netlink_kernel_release(sock);
}
int netlink_send(struct sock *sock, int group, u16 type, void *msg, int len)
diff --git a/drivers/staging/iio/Documentation/device.txt b/drivers/staging/iio/Documentation/device.txt
index 0338c7c..f03fbd3 100644
--- a/drivers/staging/iio/Documentation/device.txt
+++ b/drivers/staging/iio/Documentation/device.txt
@@ -29,8 +29,6 @@
* info->driver_module:
Set to THIS_MODULE. Used to ensure correct ownership
of various resources allocate by the core.
- * info->num_interrupt_lines:
- Number of event triggering hardware lines the device has.
* info->event_attrs:
Attributes used to enable / disable hardware events.
* info->attrs:
diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index 2490dd2..8f1b3af 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -13,6 +13,7 @@
config AD7298
tristate "Analog Devices AD7298 ADC driver"
depends on SPI
+ select IIO_KFIFO_BUF if IIO_BUFFER
help
Say yes here to build support for Analog Devices AD7298
8 Channel ADC with temperature sensor.
diff --git a/drivers/staging/iio/adc/ad7606_core.c b/drivers/staging/iio/adc/ad7606_core.c
index 10ab6dc..a13afff 100644
--- a/drivers/staging/iio/adc/ad7606_core.c
+++ b/drivers/staging/iio/adc/ad7606_core.c
@@ -235,7 +235,8 @@
.indexed = 1, \
.channel = num, \
.address = num, \
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SHARED_BIT, \
.scan_index = num, \
.scan_type = IIO_ST('s', 16, 16, 0), \
}
diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c
index 3295ea6..97ef670 100644
--- a/drivers/staging/media/lirc/lirc_serial.c
+++ b/drivers/staging/media/lirc/lirc_serial.c
@@ -129,6 +129,7 @@
static struct lirc_serial hardware[] = {
[LIRC_HOMEBREW] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_HOMEBREW].lock),
.signal_pin = UART_MSR_DCD,
.signal_pin_change = UART_MSR_DDCD,
.on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
@@ -145,6 +146,7 @@
},
[LIRC_IRDEO] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO].lock),
.signal_pin = UART_MSR_DSR,
.signal_pin_change = UART_MSR_DDSR,
.on = UART_MCR_OUT2,
@@ -156,6 +158,7 @@
},
[LIRC_IRDEO_REMOTE] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO_REMOTE].lock),
.signal_pin = UART_MSR_DSR,
.signal_pin_change = UART_MSR_DDSR,
.on = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
@@ -167,6 +170,7 @@
},
[LIRC_ANIMAX] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_ANIMAX].lock),
.signal_pin = UART_MSR_DCD,
.signal_pin_change = UART_MSR_DDCD,
.on = 0,
@@ -177,6 +181,7 @@
},
[LIRC_IGOR] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IGOR].lock),
.signal_pin = UART_MSR_DSR,
.signal_pin_change = UART_MSR_DDSR,
.on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
@@ -201,6 +206,7 @@
* See also http://www.nslu2-linux.org for this device
*/
[LIRC_NSLU2] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_NSLU2].lock),
.signal_pin = UART_MSR_CTS,
.signal_pin_change = UART_MSR_DCTS,
.on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
index 3c60088..9356886 100644
--- a/drivers/staging/nvec/nvec.c
+++ b/drivers/staging/nvec/nvec.c
@@ -675,7 +675,7 @@
{
u32 val;
- clk_enable(nvec->i2c_clk);
+ clk_prepare_enable(nvec->i2c_clk);
tegra_periph_reset_assert(nvec->i2c_clk);
udelay(2);
@@ -695,14 +695,14 @@
enable_irq(nvec->irq);
- clk_disable(nvec->i2c_clk);
+ clk_disable_unprepare(nvec->i2c_clk);
}
static void nvec_disable_i2c_slave(struct nvec_chip *nvec)
{
disable_irq(nvec->irq);
writel(I2C_SL_NEWSL | I2C_SL_NACK, nvec->base + I2C_SL_CNFG);
- clk_disable(nvec->i2c_clk);
+ clk_disable_unprepare(nvec->i2c_clk);
}
static void nvec_power_off(void)
@@ -812,7 +812,7 @@
tegra_init_i2c_slave(nvec);
- clk_enable(i2c_clk);
+ clk_prepare_enable(i2c_clk);
/* enable event reporting */
diff --git a/drivers/staging/omapdrm/omap_drv.h b/drivers/staging/omapdrm/omap_drv.h
index f238d57..2092a91 100644
--- a/drivers/staging/omapdrm/omap_drv.h
+++ b/drivers/staging/omapdrm/omap_drv.h
@@ -25,8 +25,8 @@
#include <linux/types.h>
#include <drm/drmP.h>
#include <drm/drm_crtc_helper.h>
+#include <linux/platform_data/omap_drm.h>
#include "omap_drm.h"
-#include "omap_priv.h"
#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
#define VERB(fmt, ...) if (0) DRM_DEBUG(fmt, ##__VA_ARGS__) /* verbose debug */
diff --git a/drivers/staging/omapdrm/omap_fbdev.c b/drivers/staging/omapdrm/omap_fbdev.c
index 11acd4c..8c6ed3b 100644
--- a/drivers/staging/omapdrm/omap_fbdev.c
+++ b/drivers/staging/omapdrm/omap_fbdev.c
@@ -208,7 +208,8 @@
*/
ret = omap_gem_get_paddr(fbdev->bo, &paddr, true);
if (ret) {
- dev_err(dev->dev, "could not map (paddr)!\n");
+ dev_err(dev->dev,
+ "could not map (paddr)! Skipping framebuffer alloc\n");
ret = -ENOMEM;
goto fail;
}
@@ -388,8 +389,11 @@
fbi = helper->fbdev;
- unregister_framebuffer(fbi);
- framebuffer_release(fbi);
+ /* only cleanup framebuffer if it is present */
+ if (fbi) {
+ unregister_framebuffer(fbi);
+ framebuffer_release(fbi);
+ }
drm_fb_helper_fini(helper);
diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c
index 9bd18e2..69f616c 100644
--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -102,6 +102,8 @@
/* - */
{USB_DEVICE(0x20F4, 0x646B)},
{USB_DEVICE(0x083A, 0xC512)},
+ {USB_DEVICE(0x25D4, 0x4CA1)},
+ {USB_DEVICE(0x25D4, 0x4CAB)},
/* RTL8191SU */
/* Realtek */
diff --git a/drivers/target/Makefile b/drivers/target/Makefile
index 61648d8..9fdcb56 100644
--- a/drivers/target/Makefile
+++ b/drivers/target/Makefile
@@ -9,7 +9,8 @@
target_core_tmr.o \
target_core_tpg.o \
target_core_transport.o \
- target_core_cdb.o \
+ target_core_sbc.o \
+ target_core_spc.o \
target_core_ua.o \
target_core_rd.o \
target_core_stat.o
diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index d57d10c..97c0f78 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -429,19 +429,8 @@
int iscsit_del_np_comm(struct iscsi_np *np)
{
- if (!np->np_socket)
- return 0;
-
- /*
- * Some network transports allocate their own struct sock->file,
- * see if we need to free any additional allocated resources.
- */
- if (np->np_flags & NPF_SCTP_STRUCT_FILE) {
- kfree(np->np_socket->file);
- np->np_socket->file = NULL;
- }
-
- sock_release(np->np_socket);
+ if (np->np_socket)
+ sock_release(np->np_socket);
return 0;
}
@@ -1413,8 +1402,10 @@
spin_unlock_bh(&cmd->istate_lock);
iscsit_stop_dataout_timer(cmd);
- return (!ooo_cmdsn) ? transport_generic_handle_data(
- &cmd->se_cmd) : 0;
+ if (ooo_cmdsn)
+ return 0;
+ target_execute_cmd(&cmd->se_cmd);
+ return 0;
} else /* DATAOUT_CANNOT_RECOVER */
return -1;
@@ -2683,7 +2674,7 @@
*/
logout_conn = iscsit_get_conn_from_cid_rcfr(sess,
cmd->logout_cid);
- if ((logout_conn)) {
+ if (logout_conn) {
iscsit_connection_reinstatement_rcfr(logout_conn);
iscsit_dec_conn_usage_count(logout_conn);
}
@@ -4077,13 +4068,8 @@
kfree(conn->conn_ops);
conn->conn_ops = NULL;
- if (conn->sock) {
- if (conn->conn_flags & CONNFLAG_SCTP_STRUCT_FILE) {
- kfree(conn->sock->file);
- conn->sock->file = NULL;
- }
+ if (conn->sock)
sock_release(conn->sock);
- }
conn->thread_set = NULL;
pr_debug("Moving to TARG_CONN_STATE_FREE.\n");
diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c
index 69dc8e3..a7b25e78 100644
--- a/drivers/target/iscsi/iscsi_target_configfs.c
+++ b/drivers/target/iscsi/iscsi_target_configfs.c
@@ -47,28 +47,6 @@
ssize_t (*store)(void *, const char *, size_t);
};
-struct iscsi_portal_group *lio_get_tpg_from_tpg_item(
- struct config_item *item,
- struct iscsi_tiqn **tiqn_out)
-{
- struct se_portal_group *se_tpg = container_of(to_config_group(item),
- struct se_portal_group, tpg_group);
- struct iscsi_portal_group *tpg = se_tpg->se_tpg_fabric_ptr;
- int ret;
-
- if (!tpg) {
- pr_err("Unable to locate struct iscsi_portal_group "
- "pointer\n");
- return NULL;
- }
- ret = iscsit_get_tpg(tpg);
- if (ret < 0)
- return NULL;
-
- *tiqn_out = tpg->tpg_tiqn;
- return tpg;
-}
-
/* Start items for lio_target_portal_cit */
static ssize_t lio_target_np_show_sctp(
diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h
index 1c70144..8a908b2 100644
--- a/drivers/target/iscsi/iscsi_target_core.h
+++ b/drivers/target/iscsi/iscsi_target_core.h
@@ -224,7 +224,6 @@
/* Used for struct iscsi_np->np_flags */
enum np_flags_table {
NPF_IP_NETWORK = 0x00,
- NPF_SCTP_STRUCT_FILE = 0x01 /* Bugfix */
};
/* Used for struct iscsi_np->np_thread_state */
@@ -481,6 +480,7 @@
bool task_reassign:1;
u32 ref_cmd_sn;
u32 exp_data_sn;
+ struct iscsi_cmd *ref_cmd;
struct iscsi_conn_recovery *conn_recovery;
struct se_tmr_req *se_tmr_req;
};
@@ -503,7 +503,6 @@
u16 local_port;
int net_size;
u32 auth_id;
-#define CONNFLAG_SCTP_STRUCT_FILE 0x01
u32 conn_flags;
/* Used for iscsi_tx_login_rsp() */
u32 login_itt;
diff --git a/drivers/target/iscsi/iscsi_target_erl1.c b/drivers/target/iscsi/iscsi_target_erl1.c
index ecdd46d..3df8a2c 100644
--- a/drivers/target/iscsi/iscsi_target_erl1.c
+++ b/drivers/target/iscsi/iscsi_target_erl1.c
@@ -965,8 +965,8 @@
if (cmd->immediate_data) {
if (cmd->cmd_flags & ICF_GOT_LAST_DATAOUT) {
spin_unlock_bh(&cmd->istate_lock);
- return transport_generic_handle_data(
- &cmd->se_cmd);
+ target_execute_cmd(&cmd->se_cmd);
+ return 0;
}
spin_unlock_bh(&cmd->istate_lock);
diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c
index a3656c9..0694d9b 100644
--- a/drivers/target/iscsi/iscsi_target_login.c
+++ b/drivers/target/iscsi/iscsi_target_login.c
@@ -518,7 +518,7 @@
* initiator and release the new connection.
*/
conn_ptr = iscsit_get_conn_from_cid_rcfr(sess, cid);
- if ((conn_ptr)) {
+ if (conn_ptr) {
pr_err("Connection exists with CID %hu for %s,"
" performing connection reinstatement.\n",
conn_ptr->cid, sess->sess_ops->InitiatorName);
@@ -539,7 +539,7 @@
if (sess->sess_ops->ErrorRecoveryLevel == 2) {
cr = iscsit_get_inactive_connection_recovery_entry(
sess, cid);
- if ((cr)) {
+ if (cr) {
pr_debug("Performing implicit logout"
" for connection recovery on CID: %hu\n",
conn->cid);
@@ -795,22 +795,6 @@
}
np->np_socket = sock;
/*
- * The SCTP stack needs struct socket->file.
- */
- if ((np->np_network_transport == ISCSI_SCTP_TCP) ||
- (np->np_network_transport == ISCSI_SCTP_UDP)) {
- if (!sock->file) {
- sock->file = kzalloc(sizeof(struct file), GFP_KERNEL);
- if (!sock->file) {
- pr_err("Unable to allocate struct"
- " file for SCTP\n");
- ret = -ENOMEM;
- goto fail;
- }
- np->np_flags |= NPF_SCTP_STRUCT_FILE;
- }
- }
- /*
* Setup the np->np_sockaddr from the passed sockaddr setup
* in iscsi_target_configfs.c code..
*/
@@ -869,21 +853,15 @@
fail:
np->np_socket = NULL;
- if (sock) {
- if (np->np_flags & NPF_SCTP_STRUCT_FILE) {
- kfree(sock->file);
- sock->file = NULL;
- }
-
+ if (sock)
sock_release(sock);
- }
return ret;
}
static int __iscsi_target_login_thread(struct iscsi_np *np)
{
u8 buffer[ISCSI_HDR_LEN], iscsi_opcode, zero_tsih = 0;
- int err, ret = 0, set_sctp_conn_flag, stop;
+ int err, ret = 0, stop;
struct iscsi_conn *conn = NULL;
struct iscsi_login *login;
struct iscsi_portal_group *tpg = NULL;
@@ -894,7 +872,6 @@
struct sockaddr_in6 sock_in6;
flush_signals(current);
- set_sctp_conn_flag = 0;
sock = np->np_socket;
spin_lock_bh(&np->np_thread_lock);
@@ -917,35 +894,12 @@
spin_unlock_bh(&np->np_thread_lock);
goto out;
}
- /*
- * The SCTP stack needs struct socket->file.
- */
- if ((np->np_network_transport == ISCSI_SCTP_TCP) ||
- (np->np_network_transport == ISCSI_SCTP_UDP)) {
- if (!new_sock->file) {
- new_sock->file = kzalloc(
- sizeof(struct file), GFP_KERNEL);
- if (!new_sock->file) {
- pr_err("Unable to allocate struct"
- " file for SCTP\n");
- sock_release(new_sock);
- /* Get another socket */
- return 1;
- }
- set_sctp_conn_flag = 1;
- }
- }
-
iscsi_start_login_thread_timer(np);
conn = kzalloc(sizeof(struct iscsi_conn), GFP_KERNEL);
if (!conn) {
pr_err("Could not allocate memory for"
" new connection\n");
- if (set_sctp_conn_flag) {
- kfree(new_sock->file);
- new_sock->file = NULL;
- }
sock_release(new_sock);
/* Get another socket */
return 1;
@@ -955,9 +909,6 @@
conn->conn_state = TARG_CONN_STATE_FREE;
conn->sock = new_sock;
- if (set_sctp_conn_flag)
- conn->conn_flags |= CONNFLAG_SCTP_STRUCT_FILE;
-
pr_debug("Moving to TARG_CONN_STATE_XPT_UP.\n");
conn->conn_state = TARG_CONN_STATE_XPT_UP;
@@ -1081,7 +1032,7 @@
goto new_sess_out;
zero_tsih = (pdu->tsih == 0x0000);
- if ((zero_tsih)) {
+ if (zero_tsih) {
/*
* This is the leading connection of a new session.
* We wait until after authentication to check for
@@ -1205,13 +1156,8 @@
iscsi_release_param_list(conn->param_list);
conn->param_list = NULL;
}
- if (conn->sock) {
- if (conn->conn_flags & CONNFLAG_SCTP_STRUCT_FILE) {
- kfree(conn->sock->file);
- conn->sock->file = NULL;
- }
+ if (conn->sock)
sock_release(conn->sock);
- }
kfree(conn);
if (tpg) {
diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c
index ed5241e..0c4760f 100644
--- a/drivers/target/iscsi/iscsi_target_parameters.c
+++ b/drivers/target/iscsi/iscsi_target_parameters.c
@@ -681,7 +681,7 @@
param->value = kzalloc(strlen(value) + 1, GFP_KERNEL);
if (!param->value) {
pr_err("Unable to allocate memory for value.\n");
- return -1;
+ return -ENOMEM;
}
memcpy(param->value, value, strlen(value));
diff --git a/drivers/target/iscsi/iscsi_target_tmr.c b/drivers/target/iscsi/iscsi_target_tmr.c
index f4e640b..f62fe12 100644
--- a/drivers/target/iscsi/iscsi_target_tmr.c
+++ b/drivers/target/iscsi/iscsi_target_tmr.c
@@ -19,6 +19,7 @@
******************************************************************************/
#include <asm/unaligned.h>
+#include <scsi/scsi_device.h>
#include <scsi/iscsi_proto.h>
#include <target/target_core_base.h>
#include <target/target_core_fabric.h>
@@ -61,7 +62,7 @@
}
se_tmr->ref_task_tag = hdr->rtt;
- se_tmr->ref_cmd = &ref_cmd->se_cmd;
+ tmr_req->ref_cmd = ref_cmd;
tmr_req->ref_cmd_sn = hdr->refcmdsn;
tmr_req->exp_data_sn = hdr->exp_datasn;
@@ -121,7 +122,7 @@
struct iscsi_tmr_req *tmr_req = cmd->tmr_req;
struct se_tmr_req *se_tmr = cmd->se_cmd.se_tmr_req;
struct iscsi_tm *hdr = (struct iscsi_tm *) buf;
- int ret;
+ int ret, ref_lun;
pr_debug("Got TASK_REASSIGN TMR ITT: 0x%08x,"
" RefTaskTag: 0x%08x, ExpDataSN: 0x%08x, CID: %hu\n",
@@ -155,9 +156,16 @@
return ISCSI_TMF_RSP_REJECTED;
}
+ ref_lun = scsilun_to_int(&hdr->lun);
+ if (ref_lun != ref_cmd->se_cmd.orig_fe_lun) {
+ pr_err("Unable to perform connection recovery for"
+ " differing ref_lun: %d ref_cmd orig_fe_lun: %u\n",
+ ref_lun, ref_cmd->se_cmd.orig_fe_lun);
+ return ISCSI_TMF_RSP_REJECTED;
+ }
+
se_tmr->ref_task_tag = hdr->rtt;
- se_tmr->ref_cmd = &ref_cmd->se_cmd;
- se_tmr->ref_task_lun = get_unaligned_le64(&hdr->lun);
+ tmr_req->ref_cmd = ref_cmd;
tmr_req->ref_cmd_sn = hdr->refcmdsn;
tmr_req->exp_data_sn = hdr->exp_datasn;
tmr_req->conn_recovery = cr;
@@ -191,9 +199,7 @@
struct iscsi_tmr_req *tmr_req,
struct iscsi_conn *conn)
{
- struct se_tmr_req *se_tmr = tmr_req->se_tmr_req;
- struct se_cmd *se_cmd = se_tmr->ref_cmd;
- struct iscsi_cmd *cmd = container_of(se_cmd, struct iscsi_cmd, se_cmd);
+ struct iscsi_cmd *cmd = tmr_req->ref_cmd;
struct iscsi_conn_recovery *cr;
if (!cmd->cr) {
@@ -251,7 +257,8 @@
pr_debug("WRITE ITT: 0x%08x: t_state: %d"
" never sent to transport\n",
cmd->init_task_tag, cmd->se_cmd.t_state);
- return transport_generic_handle_data(se_cmd);
+ target_execute_cmd(se_cmd);
+ return 0;
}
cmd->i_state = ISTATE_SEND_STATUS;
@@ -360,9 +367,7 @@
struct iscsi_tmr_req *tmr_req,
struct iscsi_conn *conn)
{
- struct se_tmr_req *se_tmr = tmr_req->se_tmr_req;
- struct se_cmd *se_cmd = se_tmr->ref_cmd;
- struct iscsi_cmd *cmd = container_of(se_cmd, struct iscsi_cmd, se_cmd);
+ struct iscsi_cmd *cmd = tmr_req->ref_cmd;
struct iscsi_conn_recovery *cr;
if (!cmd->cr) {
@@ -385,7 +390,7 @@
list_add_tail(&cmd->i_conn_node, &conn->conn_cmd_list);
spin_unlock_bh(&conn->cmd_lock);
- if (se_cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) {
+ if (cmd->se_cmd.se_cmd_flags & SCF_SENT_CHECK_CONDITION) {
cmd->i_state = ISTATE_SEND_STATUS;
iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state);
return 0;
@@ -411,17 +416,14 @@
struct iscsi_tmr_req *tmr_req,
struct iscsi_conn *conn)
{
- struct se_tmr_req *se_tmr = tmr_req->se_tmr_req;
- struct se_cmd *se_cmd;
struct iscsi_cmd *cmd;
int ret = 0;
- if (!se_tmr->ref_cmd) {
+ if (!tmr_req->ref_cmd) {
pr_err("TMR Request is missing a RefCmd struct iscsi_cmd.\n");
return -1;
}
- se_cmd = se_tmr->ref_cmd;
- cmd = container_of(se_cmd, struct iscsi_cmd, se_cmd);
+ cmd = tmr_req->ref_cmd;
cmd->conn = conn;
@@ -547,9 +549,7 @@
struct iscsi_tmr_req *tmr_req,
struct iscsi_conn *conn)
{
- struct se_tmr_req *se_tmr = tmr_req->se_tmr_req;
- struct se_cmd *se_cmd = se_tmr->ref_cmd;
- struct iscsi_cmd *cmd = container_of(se_cmd, struct iscsi_cmd, se_cmd);
+ struct iscsi_cmd *cmd = tmr_req->ref_cmd;
struct iscsi_pdu *pdu = NULL;
struct iscsi_r2t *r2t = NULL, *r2t_tmp;
int first_incomplete_r2t = 1, i = 0;
@@ -782,14 +782,12 @@
struct iscsi_tmr_req *tmr_req,
struct iscsi_conn *conn)
{
- struct se_tmr_req *se_tmr = tmr_req->se_tmr_req;
- struct se_cmd *se_cmd = se_tmr->ref_cmd;
- struct iscsi_cmd *ref_cmd = container_of(se_cmd, struct iscsi_cmd, se_cmd);
+ struct iscsi_cmd *ref_cmd = tmr_req->ref_cmd;
if (ref_cmd->iscsi_opcode != ISCSI_OP_SCSI_CMD)
return 0;
- if (se_cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION)
+ if (ref_cmd->se_cmd.se_cmd_flags & SCF_SENT_CHECK_CONDITION)
return 0;
if (ref_cmd->data_direction == DMA_NONE)
diff --git a/drivers/target/iscsi/iscsi_target_tpg.c b/drivers/target/iscsi/iscsi_target_tpg.c
index 879d8d0..a38a3f8 100644
--- a/drivers/target/iscsi/iscsi_target_tpg.c
+++ b/drivers/target/iscsi/iscsi_target_tpg.c
@@ -303,6 +303,7 @@
{
struct iscsi_param *param;
struct iscsi_tiqn *tiqn = tpg->tpg_tiqn;
+ int ret;
spin_lock(&tpg->tpg_state_lock);
if (tpg->tpg_state == TPG_STATE_ACTIVE) {
@@ -319,19 +320,19 @@
param = iscsi_find_param_from_key(AUTHMETHOD, tpg->param_list);
if (!param) {
spin_unlock(&tpg->tpg_state_lock);
- return -ENOMEM;
+ return -EINVAL;
}
if (ISCSI_TPG_ATTRIB(tpg)->authentication) {
- if (!strcmp(param->value, NONE))
- if (iscsi_update_param_value(param, CHAP) < 0) {
- spin_unlock(&tpg->tpg_state_lock);
- return -ENOMEM;
- }
- if (iscsit_ta_authentication(tpg, 1) < 0) {
- spin_unlock(&tpg->tpg_state_lock);
- return -ENOMEM;
+ if (!strcmp(param->value, NONE)) {
+ ret = iscsi_update_param_value(param, CHAP);
+ if (ret)
+ goto err;
}
+
+ ret = iscsit_ta_authentication(tpg, 1);
+ if (ret < 0)
+ goto err;
}
tpg->tpg_state = TPG_STATE_ACTIVE;
@@ -344,6 +345,10 @@
spin_unlock(&tiqn->tiqn_tpg_lock);
return 0;
+
+err:
+ spin_unlock(&tpg->tpg_state_lock);
+ return ret;
}
int iscsit_tpg_disable_portal_group(struct iscsi_portal_group *tpg, int force)
@@ -558,7 +563,7 @@
if ((authentication != 1) && (authentication != 0)) {
pr_err("Illegal value for authentication parameter:"
" %u, ignoring request.\n", authentication);
- return -1;
+ return -EINVAL;
}
memset(buf1, 0, sizeof(buf1));
@@ -593,7 +598,7 @@
} else {
snprintf(buf1, sizeof(buf1), "%s", param->value);
none = strstr(buf1, NONE);
- if ((none))
+ if (none)
goto out;
strncat(buf1, ",", strlen(","));
strncat(buf1, NONE, strlen(NONE));
diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c
index 38dfac2..5491c63 100644
--- a/drivers/target/loopback/tcm_loop.c
+++ b/drivers/target/loopback/tcm_loop.c
@@ -211,12 +211,11 @@
/*
* Because some userspace code via scsi-generic do not memset their
* associated read buffers, go ahead and do that here for type
- * SCF_SCSI_CONTROL_SG_IO_CDB. Also note that this is currently
- * guaranteed to be a single SGL for SCF_SCSI_CONTROL_SG_IO_CDB
- * by target core in target_setup_cmd_from_cdb() ->
- * transport_generic_cmd_sequencer().
+ * non-data CDBs. Also note that this is currently guaranteed to be a
+ * single SGL for this case by target core in
+ * target_setup_cmd_from_cdb() -> transport_generic_cmd_sequencer().
*/
- if (se_cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB &&
+ if (!(se_cmd->se_cmd_flags & SCF_SCSI_DATA_CDB) &&
se_cmd->data_direction == DMA_FROM_DEVICE) {
struct scatterlist *sg = scsi_sglist(sc);
unsigned char *buf = kmap(sg_page(sg)) + sg->offset;
@@ -779,7 +778,7 @@
* We now tell TCM to add this WRITE CDB directly into the TCM storage
* object execution queue.
*/
- transport_generic_process_write(se_cmd);
+ target_execute_cmd(se_cmd);
return 0;
}
diff --git a/drivers/target/sbp/sbp_target.c b/drivers/target/sbp/sbp_target.c
index 7e6136e..39ddba5 100644
--- a/drivers/target/sbp/sbp_target.c
+++ b/drivers/target/sbp/sbp_target.c
@@ -1219,28 +1219,14 @@
ret = sbp_fetch_command(req);
if (ret) {
pr_debug("sbp_handle_command: fetch command failed: %d\n", ret);
- req->status.status |= cpu_to_be32(
- STATUS_BLOCK_RESP(STATUS_RESP_TRANSPORT_FAILURE) |
- STATUS_BLOCK_DEAD(0) |
- STATUS_BLOCK_LEN(1) |
- STATUS_BLOCK_SBP_STATUS(SBP_STATUS_UNSPECIFIED_ERROR));
- sbp_send_status(req);
- sbp_free_request(req);
- return;
+ goto err;
}
ret = sbp_fetch_page_table(req);
if (ret) {
pr_debug("sbp_handle_command: fetch page table failed: %d\n",
ret);
- req->status.status |= cpu_to_be32(
- STATUS_BLOCK_RESP(STATUS_RESP_TRANSPORT_FAILURE) |
- STATUS_BLOCK_DEAD(0) |
- STATUS_BLOCK_LEN(1) |
- STATUS_BLOCK_SBP_STATUS(SBP_STATUS_UNSPECIFIED_ERROR));
- sbp_send_status(req);
- sbp_free_request(req);
- return;
+ goto err;
}
unpacked_lun = req->login->lun->unpacked_lun;
@@ -1249,9 +1235,21 @@
pr_debug("sbp_handle_command ORB:0x%llx unpacked_lun:%d data_len:%d data_dir:%d\n",
req->orb_pointer, unpacked_lun, data_length, data_dir);
- target_submit_cmd(&req->se_cmd, sess->se_sess, req->cmd_buf,
- req->sense_buf, unpacked_lun, data_length,
- MSG_SIMPLE_TAG, data_dir, 0);
+ if (target_submit_cmd(&req->se_cmd, sess->se_sess, req->cmd_buf,
+ req->sense_buf, unpacked_lun, data_length,
+ MSG_SIMPLE_TAG, data_dir, 0))
+ goto err;
+
+ return;
+
+err:
+ req->status.status |= cpu_to_be32(
+ STATUS_BLOCK_RESP(STATUS_RESP_TRANSPORT_FAILURE) |
+ STATUS_BLOCK_DEAD(0) |
+ STATUS_BLOCK_LEN(1) |
+ STATUS_BLOCK_SBP_STATUS(SBP_STATUS_UNSPECIFIED_ERROR));
+ sbp_send_status(req);
+ sbp_free_request(req);
}
/*
@@ -1784,8 +1782,7 @@
return ret;
}
- transport_generic_process_write(se_cmd);
-
+ target_execute_cmd(se_cmd);
return 0;
}
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index e624b83..9179997 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -374,8 +374,9 @@
out:
transport_kunmap_data_sg(cmd);
- target_complete_cmd(cmd, GOOD);
- return 0;
+ if (!rc)
+ target_complete_cmd(cmd, GOOD);
+ return rc;
}
static inline int core_alua_state_nonoptimized(
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index 5ad9728..cf2c66f 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -300,8 +300,8 @@
lun = deve->se_lun;
spin_unlock_irq(&nacl->device_list_lock);
- core_update_device_list_for_node(lun, NULL, deve->mapped_lun,
- TRANSPORT_LUNFLAGS_NO_ACCESS, nacl, tpg, 0);
+ core_disable_device_list_for_node(lun, NULL, deve->mapped_lun,
+ TRANSPORT_LUNFLAGS_NO_ACCESS, nacl, tpg);
spin_lock_irq(&nacl->device_list_lock);
}
spin_unlock_irq(&nacl->device_list_lock);
@@ -342,72 +342,46 @@
spin_unlock_irq(&nacl->device_list_lock);
}
-/* core_update_device_list_for_node():
+/* core_enable_device_list_for_node():
*
*
*/
-int core_update_device_list_for_node(
+int core_enable_device_list_for_node(
struct se_lun *lun,
struct se_lun_acl *lun_acl,
u32 mapped_lun,
u32 lun_access,
struct se_node_acl *nacl,
- struct se_portal_group *tpg,
- int enable)
+ struct se_portal_group *tpg)
{
struct se_port *port = lun->lun_sep;
- struct se_dev_entry *deve = nacl->device_list[mapped_lun];
- int trans = 0;
- /*
- * If the MappedLUN entry is being disabled, the entry in
- * port->sep_alua_list must be removed now before clearing the
- * struct se_dev_entry pointers below as logic in
- * core_alua_do_transition_tg_pt() depends on these being present.
- */
- if (!enable) {
- /*
- * deve->se_lun_acl will be NULL for demo-mode created LUNs
- * that have not been explicitly concerted to MappedLUNs ->
- * struct se_lun_acl, but we remove deve->alua_port_list from
- * port->sep_alua_list. This also means that active UAs and
- * NodeACL context specific PR metadata for demo-mode
- * MappedLUN *deve will be released below..
- */
- spin_lock_bh(&port->sep_alua_lock);
- list_del(&deve->alua_port_list);
- spin_unlock_bh(&port->sep_alua_lock);
- }
+ struct se_dev_entry *deve;
spin_lock_irq(&nacl->device_list_lock);
- if (enable) {
- /*
- * Check if the call is handling demo mode -> explict LUN ACL
- * transition. This transition must be for the same struct se_lun
- * + mapped_lun that was setup in demo mode..
- */
- if (deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS) {
- if (deve->se_lun_acl != NULL) {
- pr_err("struct se_dev_entry->se_lun_acl"
- " already set for demo mode -> explict"
- " LUN ACL transition\n");
- spin_unlock_irq(&nacl->device_list_lock);
- return -EINVAL;
- }
- if (deve->se_lun != lun) {
- pr_err("struct se_dev_entry->se_lun does"
- " match passed struct se_lun for demo mode"
- " -> explict LUN ACL transition\n");
- spin_unlock_irq(&nacl->device_list_lock);
- return -EINVAL;
- }
- deve->se_lun_acl = lun_acl;
- trans = 1;
- } else {
- deve->se_lun = lun;
- deve->se_lun_acl = lun_acl;
- deve->mapped_lun = mapped_lun;
- deve->lun_flags |= TRANSPORT_LUNFLAGS_INITIATOR_ACCESS;
+
+ deve = nacl->device_list[mapped_lun];
+
+ /*
+ * Check if the call is handling demo mode -> explict LUN ACL
+ * transition. This transition must be for the same struct se_lun
+ * + mapped_lun that was setup in demo mode..
+ */
+ if (deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS) {
+ if (deve->se_lun_acl != NULL) {
+ pr_err("struct se_dev_entry->se_lun_acl"
+ " already set for demo mode -> explict"
+ " LUN ACL transition\n");
+ spin_unlock_irq(&nacl->device_list_lock);
+ return -EINVAL;
}
+ if (deve->se_lun != lun) {
+ pr_err("struct se_dev_entry->se_lun does"
+ " match passed struct se_lun for demo mode"
+ " -> explict LUN ACL transition\n");
+ spin_unlock_irq(&nacl->device_list_lock);
+ return -EINVAL;
+ }
+ deve->se_lun_acl = lun_acl;
if (lun_access & TRANSPORT_LUNFLAGS_READ_WRITE) {
deve->lun_flags &= ~TRANSPORT_LUNFLAGS_READ_ONLY;
@@ -417,27 +391,72 @@
deve->lun_flags |= TRANSPORT_LUNFLAGS_READ_ONLY;
}
- if (trans) {
- spin_unlock_irq(&nacl->device_list_lock);
- return 0;
- }
- deve->creation_time = get_jiffies_64();
- deve->attach_count++;
spin_unlock_irq(&nacl->device_list_lock);
-
- spin_lock_bh(&port->sep_alua_lock);
- list_add_tail(&deve->alua_port_list, &port->sep_alua_list);
- spin_unlock_bh(&port->sep_alua_lock);
-
return 0;
}
+
+ deve->se_lun = lun;
+ deve->se_lun_acl = lun_acl;
+ deve->mapped_lun = mapped_lun;
+ deve->lun_flags |= TRANSPORT_LUNFLAGS_INITIATOR_ACCESS;
+
+ if (lun_access & TRANSPORT_LUNFLAGS_READ_WRITE) {
+ deve->lun_flags &= ~TRANSPORT_LUNFLAGS_READ_ONLY;
+ deve->lun_flags |= TRANSPORT_LUNFLAGS_READ_WRITE;
+ } else {
+ deve->lun_flags &= ~TRANSPORT_LUNFLAGS_READ_WRITE;
+ deve->lun_flags |= TRANSPORT_LUNFLAGS_READ_ONLY;
+ }
+
+ deve->creation_time = get_jiffies_64();
+ deve->attach_count++;
+ spin_unlock_irq(&nacl->device_list_lock);
+
+ spin_lock_bh(&port->sep_alua_lock);
+ list_add_tail(&deve->alua_port_list, &port->sep_alua_list);
+ spin_unlock_bh(&port->sep_alua_lock);
+
+ return 0;
+}
+
+/* core_disable_device_list_for_node():
+ *
+ *
+ */
+int core_disable_device_list_for_node(
+ struct se_lun *lun,
+ struct se_lun_acl *lun_acl,
+ u32 mapped_lun,
+ u32 lun_access,
+ struct se_node_acl *nacl,
+ struct se_portal_group *tpg)
+{
+ struct se_port *port = lun->lun_sep;
+ struct se_dev_entry *deve = nacl->device_list[mapped_lun];
+
+ /*
+ * If the MappedLUN entry is being disabled, the entry in
+ * port->sep_alua_list must be removed now before clearing the
+ * struct se_dev_entry pointers below as logic in
+ * core_alua_do_transition_tg_pt() depends on these being present.
+ *
+ * deve->se_lun_acl will be NULL for demo-mode created LUNs
+ * that have not been explicitly converted to MappedLUNs ->
+ * struct se_lun_acl, but we remove deve->alua_port_list from
+ * port->sep_alua_list. This also means that active UAs and
+ * NodeACL context specific PR metadata for demo-mode
+ * MappedLUN *deve will be released below..
+ */
+ spin_lock_bh(&port->sep_alua_lock);
+ list_del(&deve->alua_port_list);
+ spin_unlock_bh(&port->sep_alua_lock);
/*
* Wait for any in process SPEC_I_PT=1 or REGISTER_AND_MOVE
* PR operation to complete.
*/
- spin_unlock_irq(&nacl->device_list_lock);
while (atomic_read(&deve->pr_ref_count) != 0)
cpu_relax();
+
spin_lock_irq(&nacl->device_list_lock);
/*
* Disable struct se_dev_entry LUN ACL mapping
@@ -475,9 +494,9 @@
continue;
spin_unlock_irq(&nacl->device_list_lock);
- core_update_device_list_for_node(lun, NULL,
+ core_disable_device_list_for_node(lun, NULL,
deve->mapped_lun, TRANSPORT_LUNFLAGS_NO_ACCESS,
- nacl, tpg, 0);
+ nacl, tpg);
spin_lock_irq(&nacl->device_list_lock);
}
@@ -715,7 +734,7 @@
se_dev_stop(dev);
if (dev->dev_ptr) {
- kthread_stop(dev->process_thread);
+ destroy_workqueue(dev->tmr_wq);
if (dev->transport->free_device)
dev->transport->free_device(dev->dev_ptr);
}
@@ -822,7 +841,7 @@
return ret;
}
-u32 se_dev_align_max_sectors(u32 max_sectors, u32 block_size)
+static u32 se_dev_align_max_sectors(u32 max_sectors, u32 block_size)
{
u32 tmp, aligned_max_sectors;
/*
@@ -1273,7 +1292,6 @@
struct se_lun *core_dev_add_lun(
struct se_portal_group *tpg,
- struct se_hba *hba,
struct se_device *dev,
u32 lun)
{
@@ -1298,7 +1316,7 @@
pr_debug("%s_TPG[%u]_LUN[%u] - Activated %s Logical Unit from"
" CORE HBA: %u\n", tpg->se_tpg_tfo->get_fabric_name(),
tpg->se_tpg_tfo->tpg_get_tag(tpg), lun_p->unpacked_lun,
- tpg->se_tpg_tfo->get_fabric_name(), hba->hba_id);
+ tpg->se_tpg_tfo->get_fabric_name(), dev->se_hba->hba_id);
/*
* Update LUN maps for dynamically added initiators when
* generate_node_acl is enabled.
@@ -1470,8 +1488,8 @@
lacl->se_lun = lun;
- if (core_update_device_list_for_node(lun, lacl, lacl->mapped_lun,
- lun_access, nacl, tpg, 1) < 0)
+ if (core_enable_device_list_for_node(lun, lacl, lacl->mapped_lun,
+ lun_access, nacl, tpg) < 0)
return -EINVAL;
spin_lock(&lun->lun_acl_lock);
@@ -1514,8 +1532,8 @@
smp_mb__after_atomic_dec();
spin_unlock(&lun->lun_acl_lock);
- core_update_device_list_for_node(lun, NULL, lacl->mapped_lun,
- TRANSPORT_LUNFLAGS_NO_ACCESS, nacl, tpg, 0);
+ core_disable_device_list_for_node(lun, NULL, lacl->mapped_lun,
+ TRANSPORT_LUNFLAGS_NO_ACCESS, nacl, tpg);
lacl->se_lun = NULL;
diff --git a/drivers/target/target_core_fabric_configfs.c b/drivers/target/target_core_fabric_configfs.c
index 405cc98..ea479e5 100644
--- a/drivers/target/target_core_fabric_configfs.c
+++ b/drivers/target/target_core_fabric_configfs.c
@@ -764,8 +764,7 @@
goto out;
}
- lun_p = core_dev_add_lun(se_tpg, dev->se_hba, dev,
- lun->unpacked_lun);
+ lun_p = core_dev_add_lun(se_tpg, dev, lun->unpacked_lun);
if (IS_ERR(lun_p)) {
pr_err("core_dev_add_lun() failed\n");
ret = PTR_ERR(lun_p);
diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c
index 9f99d04..9e21005 100644
--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -331,7 +331,7 @@
return 1;
}
-static void fd_emulate_sync_cache(struct se_cmd *cmd)
+static int fd_execute_sync_cache(struct se_cmd *cmd)
{
struct se_device *dev = cmd->se_dev;
struct fd_dev *fd_dev = dev->dev_ptr;
@@ -365,7 +365,7 @@
pr_err("FILEIO: vfs_fsync_range() failed: %d\n", ret);
if (immed)
- return;
+ return 0;
if (ret) {
cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
@@ -373,11 +373,15 @@
} else {
target_complete_cmd(cmd, SAM_STAT_GOOD);
}
+
+ return 0;
}
-static int fd_execute_cmd(struct se_cmd *cmd, struct scatterlist *sgl,
- u32 sgl_nents, enum dma_data_direction data_direction)
+static int fd_execute_rw(struct se_cmd *cmd)
{
+ struct scatterlist *sgl = cmd->t_data_sg;
+ u32 sgl_nents = cmd->t_data_nents;
+ enum dma_data_direction data_direction = cmd->data_direction;
struct se_device *dev = cmd->se_dev;
int ret = 0;
@@ -550,6 +554,16 @@
return div_u64(dev_size, dev->se_sub_dev->se_dev_attrib.block_size);
}
+static struct spc_ops fd_spc_ops = {
+ .execute_rw = fd_execute_rw,
+ .execute_sync_cache = fd_execute_sync_cache,
+};
+
+static int fd_parse_cdb(struct se_cmd *cmd)
+{
+ return sbc_parse_cdb(cmd, &fd_spc_ops);
+}
+
static struct se_subsystem_api fileio_template = {
.name = "fileio",
.owner = THIS_MODULE,
@@ -561,8 +575,7 @@
.allocate_virtdevice = fd_allocate_virtdevice,
.create_virtdevice = fd_create_virtdevice,
.free_device = fd_free_device,
- .execute_cmd = fd_execute_cmd,
- .do_sync_cache = fd_emulate_sync_cache,
+ .parse_cdb = fd_parse_cdb,
.check_configfs_dev_params = fd_check_configfs_dev_params,
.set_configfs_dev_params = fd_set_configfs_dev_params,
.show_configfs_dev_params = fd_show_configfs_dev_params,
diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c
index fd47950..76db75e 100644
--- a/drivers/target/target_core_iblock.c
+++ b/drivers/target/target_core_iblock.c
@@ -40,6 +40,7 @@
#include <linux/module.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
+#include <asm/unaligned.h>
#include <target/target_core_base.h>
#include <target/target_core_backend.h>
@@ -96,6 +97,7 @@
struct request_queue *q;
struct queue_limits *limits;
u32 dev_flags = 0;
+ fmode_t mode;
int ret = -EINVAL;
if (!ib_dev) {
@@ -117,8 +119,11 @@
pr_debug( "IBLOCK: Claiming struct block_device: %s\n",
ib_dev->ibd_udev_path);
- bd = blkdev_get_by_path(ib_dev->ibd_udev_path,
- FMODE_WRITE|FMODE_READ|FMODE_EXCL, ib_dev);
+ mode = FMODE_READ|FMODE_EXCL;
+ if (!ib_dev->ibd_readonly)
+ mode |= FMODE_WRITE;
+
+ bd = blkdev_get_by_path(ib_dev->ibd_udev_path, mode, ib_dev);
if (IS_ERR(bd)) {
ret = PTR_ERR(bd);
goto failed;
@@ -292,7 +297,7 @@
* Implement SYCHRONIZE CACHE. Note that we can't handle lba ranges and must
* always flush the whole cache.
*/
-static void iblock_emulate_sync_cache(struct se_cmd *cmd)
+static int iblock_execute_sync_cache(struct se_cmd *cmd)
{
struct iblock_dev *ib_dev = cmd->se_dev->dev_ptr;
int immed = (cmd->t_task_cdb[1] & 0x2);
@@ -311,23 +316,98 @@
if (!immed)
bio->bi_private = cmd;
submit_bio(WRITE_FLUSH, bio);
+ return 0;
}
-static int iblock_do_discard(struct se_device *dev, sector_t lba, u32 range)
+static int iblock_execute_unmap(struct se_cmd *cmd)
{
+ struct se_device *dev = cmd->se_dev;
struct iblock_dev *ibd = dev->dev_ptr;
- struct block_device *bd = ibd->ibd_bd;
- int barrier = 0;
+ unsigned char *buf, *ptr = NULL;
+ sector_t lba;
+ int size = cmd->data_length;
+ u32 range;
+ int ret = 0;
+ int dl, bd_dl;
- return blkdev_issue_discard(bd, lba, range, GFP_KERNEL, barrier);
+ buf = transport_kmap_data_sg(cmd);
+
+ dl = get_unaligned_be16(&buf[0]);
+ bd_dl = get_unaligned_be16(&buf[2]);
+
+ size = min(size - 8, bd_dl);
+ if (size / 16 > dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) {
+ cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST;
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* First UNMAP block descriptor starts at 8 byte offset */
+ ptr = &buf[8];
+ pr_debug("UNMAP: Sub: %s Using dl: %u bd_dl: %u size: %u"
+ " ptr: %p\n", dev->transport->name, dl, bd_dl, size, ptr);
+
+ while (size >= 16) {
+ lba = get_unaligned_be64(&ptr[0]);
+ range = get_unaligned_be32(&ptr[8]);
+ pr_debug("UNMAP: Using lba: %llu and range: %u\n",
+ (unsigned long long)lba, range);
+
+ if (range > dev->se_sub_dev->se_dev_attrib.max_unmap_lba_count) {
+ cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST;
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (lba + range > dev->transport->get_blocks(dev) + 1) {
+ cmd->scsi_sense_reason = TCM_ADDRESS_OUT_OF_RANGE;
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = blkdev_issue_discard(ibd->ibd_bd, lba, range,
+ GFP_KERNEL, 0);
+ if (ret < 0) {
+ pr_err("blkdev_issue_discard() failed: %d\n",
+ ret);
+ goto err;
+ }
+
+ ptr += 16;
+ size -= 16;
+ }
+
+err:
+ transport_kunmap_data_sg(cmd);
+ if (!ret)
+ target_complete_cmd(cmd, GOOD);
+ return ret;
+}
+
+static int iblock_execute_write_same(struct se_cmd *cmd)
+{
+ struct iblock_dev *ibd = cmd->se_dev->dev_ptr;
+ int ret;
+
+ ret = blkdev_issue_discard(ibd->ibd_bd, cmd->t_task_lba,
+ spc_get_write_same_sectors(cmd), GFP_KERNEL,
+ 0);
+ if (ret < 0) {
+ pr_debug("blkdev_issue_discard() failed for WRITE_SAME\n");
+ return ret;
+ }
+
+ target_complete_cmd(cmd, GOOD);
+ return 0;
}
enum {
- Opt_udev_path, Opt_force, Opt_err
+ Opt_udev_path, Opt_readonly, Opt_force, Opt_err
};
static match_table_t tokens = {
{Opt_udev_path, "udev_path=%s"},
+ {Opt_readonly, "readonly=%d"},
{Opt_force, "force=%d"},
{Opt_err, NULL}
};
@@ -340,6 +420,7 @@
char *orig, *ptr, *arg_p, *opts;
substring_t args[MAX_OPT_ARGS];
int ret = 0, token;
+ unsigned long tmp_readonly;
opts = kstrdup(page, GFP_KERNEL);
if (!opts)
@@ -372,6 +453,22 @@
ib_dev->ibd_udev_path);
ib_dev->ibd_flags |= IBDF_HAS_UDEV_PATH;
break;
+ case Opt_readonly:
+ arg_p = match_strdup(&args[0]);
+ if (!arg_p) {
+ ret = -ENOMEM;
+ break;
+ }
+ ret = strict_strtoul(arg_p, 0, &tmp_readonly);
+ kfree(arg_p);
+ if (ret < 0) {
+ pr_err("strict_strtoul() failed for"
+ " readonly=\n");
+ goto out;
+ }
+ ib_dev->ibd_readonly = tmp_readonly;
+ pr_debug("IBLOCK: readonly: %d\n", ib_dev->ibd_readonly);
+ break;
case Opt_force:
break;
default:
@@ -411,11 +508,10 @@
if (bd)
bl += sprintf(b + bl, "iBlock device: %s",
bdevname(bd, buf));
- if (ibd->ibd_flags & IBDF_HAS_UDEV_PATH) {
- bl += sprintf(b + bl, " UDEV PATH: %s\n",
+ if (ibd->ibd_flags & IBDF_HAS_UDEV_PATH)
+ bl += sprintf(b + bl, " UDEV PATH: %s",
ibd->ibd_udev_path);
- } else
- bl += sprintf(b + bl, "\n");
+ bl += sprintf(b + bl, " readonly: %d\n", ibd->ibd_readonly);
bl += sprintf(b + bl, " ");
if (bd) {
@@ -493,9 +589,11 @@
blk_finish_plug(&plug);
}
-static int iblock_execute_cmd(struct se_cmd *cmd, struct scatterlist *sgl,
- u32 sgl_nents, enum dma_data_direction data_direction)
+static int iblock_execute_rw(struct se_cmd *cmd)
{
+ struct scatterlist *sgl = cmd->t_data_sg;
+ u32 sgl_nents = cmd->t_data_nents;
+ enum dma_data_direction data_direction = cmd->data_direction;
struct se_device *dev = cmd->se_dev;
struct iblock_req *ibr;
struct bio *bio;
@@ -642,6 +740,18 @@
iblock_complete_cmd(cmd);
}
+static struct spc_ops iblock_spc_ops = {
+ .execute_rw = iblock_execute_rw,
+ .execute_sync_cache = iblock_execute_sync_cache,
+ .execute_write_same = iblock_execute_write_same,
+ .execute_unmap = iblock_execute_unmap,
+};
+
+static int iblock_parse_cdb(struct se_cmd *cmd)
+{
+ return sbc_parse_cdb(cmd, &iblock_spc_ops);
+}
+
static struct se_subsystem_api iblock_template = {
.name = "iblock",
.owner = THIS_MODULE,
@@ -653,9 +763,7 @@
.allocate_virtdevice = iblock_allocate_virtdevice,
.create_virtdevice = iblock_create_virtdevice,
.free_device = iblock_free_device,
- .execute_cmd = iblock_execute_cmd,
- .do_discard = iblock_do_discard,
- .do_sync_cache = iblock_emulate_sync_cache,
+ .parse_cdb = iblock_parse_cdb,
.check_configfs_dev_params = iblock_check_configfs_dev_params,
.set_configfs_dev_params = iblock_set_configfs_dev_params,
.show_configfs_dev_params = iblock_show_configfs_dev_params,
diff --git a/drivers/target/target_core_iblock.h b/drivers/target/target_core_iblock.h
index 66cf7b9..533627a 100644
--- a/drivers/target/target_core_iblock.h
+++ b/drivers/target/target_core_iblock.h
@@ -18,6 +18,7 @@
u32 ibd_flags;
struct bio_set *ibd_bio_set;
struct block_device *ibd_bd;
+ bool ibd_readonly;
} ____cacheline_aligned;
#endif /* TARGET_CORE_IBLOCK_H */
diff --git a/drivers/target/target_core_internal.h b/drivers/target/target_core_internal.h
index 165e824..0fd4282 100644
--- a/drivers/target/target_core_internal.h
+++ b/drivers/target/target_core_internal.h
@@ -4,25 +4,16 @@
/* target_core_alua.c */
extern struct t10_alua_lu_gp *default_lu_gp;
-/* target_core_cdb.c */
-int target_emulate_inquiry(struct se_cmd *cmd);
-int target_emulate_readcapacity(struct se_cmd *cmd);
-int target_emulate_readcapacity_16(struct se_cmd *cmd);
-int target_emulate_modesense(struct se_cmd *cmd);
-int target_emulate_request_sense(struct se_cmd *cmd);
-int target_emulate_unmap(struct se_cmd *cmd);
-int target_emulate_write_same(struct se_cmd *cmd);
-int target_emulate_synchronize_cache(struct se_cmd *cmd);
-int target_emulate_noop(struct se_cmd *cmd);
-
/* target_core_device.c */
struct se_dev_entry *core_get_se_deve_from_rtpi(struct se_node_acl *, u16);
int core_free_device_list_for_node(struct se_node_acl *,
struct se_portal_group *);
void core_dec_lacl_count(struct se_node_acl *, struct se_cmd *);
void core_update_device_list_access(u32, u32, struct se_node_acl *);
-int core_update_device_list_for_node(struct se_lun *, struct se_lun_acl *,
- u32, u32, struct se_node_acl *, struct se_portal_group *, int);
+int core_enable_device_list_for_node(struct se_lun *, struct se_lun_acl *,
+ u32, u32, struct se_node_acl *, struct se_portal_group *);
+int core_disable_device_list_for_node(struct se_lun *, struct se_lun_acl *,
+ u32, u32, struct se_node_acl *, struct se_portal_group *);
void core_clear_lun_from_tpg(struct se_lun *, struct se_portal_group *);
int core_dev_export(struct se_device *, struct se_portal_group *,
struct se_lun *);
@@ -56,8 +47,7 @@
int se_dev_set_fabric_max_sectors(struct se_device *, u32);
int se_dev_set_optimal_sectors(struct se_device *, u32);
int se_dev_set_block_size(struct se_device *, u32);
-struct se_lun *core_dev_add_lun(struct se_portal_group *, struct se_hba *,
- struct se_device *, u32);
+struct se_lun *core_dev_add_lun(struct se_portal_group *, struct se_device *, u32);
int core_dev_del_lun(struct se_portal_group *, u32);
struct se_lun *core_get_lun_from_tpg(struct se_portal_group *, u32);
struct se_lun_acl *core_dev_init_initiator_node_lun_acl(struct se_portal_group *,
@@ -104,7 +94,6 @@
u32 scsi_get_new_index(scsi_index_t);
void transport_subsystem_check_init(void);
void transport_cmd_finish_abort(struct se_cmd *, int);
-void __target_remove_from_execute_list(struct se_cmd *);
unsigned char *transport_dump_cmd_direction(struct se_cmd *);
void transport_dump_dev_state(struct se_device *, char *, int *);
void transport_dump_dev_info(struct se_device *, struct se_lun *,
@@ -116,6 +105,7 @@
bool target_stop_cmd(struct se_cmd *cmd, unsigned long *flags);
int transport_clear_lun_from_sessions(struct se_lun *);
void transport_send_task_abort(struct se_cmd *);
+int target_cmd_size_check(struct se_cmd *cmd, unsigned int size);
/* target_core_stat.c */
void target_stat_setup_dev_default_groups(struct se_subsystem_dev *);
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index 8556499..1e94650 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -507,7 +507,7 @@
* Check if write exclusive initiator ports *NOT* holding the
* WRITE_EXCLUSIVE_* reservation.
*/
- if ((we) && !(registered_nexus)) {
+ if (we && !registered_nexus) {
if (cmd->data_direction == DMA_TO_DEVICE) {
/*
* Conflict for write exclusive
@@ -2031,7 +2031,7 @@
if (IS_ERR(file) || !file || !file->f_dentry) {
pr_err("filp_open(%s) for APTPL metadata"
" failed\n", path);
- return (PTR_ERR(file) < 0 ? PTR_ERR(file) : -ENOENT);
+ return IS_ERR(file) ? PTR_ERR(file) : -ENOENT;
}
iov[0].iov_base = &buf[0];
@@ -2486,7 +2486,7 @@
*/
spin_lock(&dev->dev_reservation_lock);
pr_res_holder = dev->dev_pr_res_holder;
- if ((pr_res_holder)) {
+ if (pr_res_holder) {
/*
* From spc4r17 Section 5.7.9: Reserving:
*
@@ -3818,7 +3818,7 @@
" SPC-2 reservation is held, returning"
" RESERVATION_CONFLICT\n");
cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT;
- ret = EINVAL;
+ ret = -EINVAL;
goto out;
}
@@ -3828,7 +3828,8 @@
*/
if (!cmd->se_sess) {
cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
if (cmd->data_length < 24) {
@@ -4029,7 +4030,7 @@
spin_lock(&se_dev->dev_reservation_lock);
pr_reg = se_dev->dev_pr_res_holder;
- if ((pr_reg)) {
+ if (pr_reg) {
/*
* Set the hardcoded Additional Length
*/
diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index 4ce2cf6..6e32ff6 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -35,8 +35,10 @@
#include <linux/spinlock.h>
#include <linux/genhd.h>
#include <linux/cdrom.h>
-#include <linux/file.h>
+#include <linux/ratelimit.h>
#include <linux/module.h>
+#include <asm/unaligned.h>
+
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_cmnd.h>
@@ -46,12 +48,14 @@
#include <target/target_core_base.h>
#include <target/target_core_backend.h>
+#include "target_core_alua.h"
#include "target_core_pscsi.h"
#define ISPRINT(a) ((a >= ' ') && (a <= '~'))
static struct se_subsystem_api pscsi_template;
+static int pscsi_execute_cmd(struct se_cmd *cmd);
static void pscsi_req_done(struct request *, int);
/* pscsi_attach_hba():
@@ -1019,9 +1023,79 @@
return -ENOMEM;
}
-static int pscsi_execute_cmd(struct se_cmd *cmd, struct scatterlist *sgl,
- u32 sgl_nents, enum dma_data_direction data_direction)
+/*
+ * Clear a lun set in the cdb if the initiator talking to use spoke
+ * and old standards version, as we can't assume the underlying device
+ * won't choke up on it.
+ */
+static inline void pscsi_clear_cdb_lun(unsigned char *cdb)
{
+ switch (cdb[0]) {
+ case READ_10: /* SBC - RDProtect */
+ case READ_12: /* SBC - RDProtect */
+ case READ_16: /* SBC - RDProtect */
+ case SEND_DIAGNOSTIC: /* SPC - SELF-TEST Code */
+ case VERIFY: /* SBC - VRProtect */
+ case VERIFY_16: /* SBC - VRProtect */
+ case WRITE_VERIFY: /* SBC - VRProtect */
+ case WRITE_VERIFY_12: /* SBC - VRProtect */
+ case MAINTENANCE_IN: /* SPC - Parameter Data Format for SA RTPG */
+ break;
+ default:
+ cdb[1] &= 0x1f; /* clear logical unit number */
+ break;
+ }
+}
+
+static int pscsi_parse_cdb(struct se_cmd *cmd)
+{
+ unsigned char *cdb = cmd->t_task_cdb;
+ unsigned int dummy_size;
+ int ret;
+
+ if (cmd->se_cmd_flags & SCF_BIDI) {
+ cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
+ cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE;
+ return -EINVAL;
+ }
+
+ pscsi_clear_cdb_lun(cdb);
+
+ /*
+ * For REPORT LUNS we always need to emulate the response, for everything
+ * else the default for pSCSI is to pass the command to the underlying
+ * LLD / physical hardware.
+ */
+ switch (cdb[0]) {
+ case REPORT_LUNS:
+ ret = spc_parse_cdb(cmd, &dummy_size);
+ if (ret)
+ return ret;
+ break;
+ case READ_6:
+ case READ_10:
+ case READ_12:
+ case READ_16:
+ case WRITE_6:
+ case WRITE_10:
+ case WRITE_12:
+ case WRITE_16:
+ case WRITE_VERIFY:
+ cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB;
+ /* FALLTHROUGH*/
+ default:
+ cmd->execute_cmd = pscsi_execute_cmd;
+ break;
+ }
+
+ return 0;
+}
+
+static int pscsi_execute_cmd(struct se_cmd *cmd)
+{
+ struct scatterlist *sgl = cmd->t_data_sg;
+ u32 sgl_nents = cmd->t_data_nents;
+ enum dma_data_direction data_direction = cmd->data_direction;
struct pscsi_dev_virt *pdv = cmd->se_dev->dev_ptr;
struct pscsi_plugin_task *pt;
struct request *req;
@@ -1042,7 +1116,7 @@
memcpy(pt->pscsi_cdb, cmd->t_task_cdb,
scsi_command_size(cmd->t_task_cdb));
- if (cmd->se_cmd_flags & SCF_SCSI_NON_DATA_CDB) {
+ if (!sgl) {
req = blk_get_request(pdv->pdv_sd->request_queue,
(data_direction == DMA_TO_DEVICE),
GFP_KERNEL);
@@ -1188,7 +1262,7 @@
.create_virtdevice = pscsi_create_virtdevice,
.free_device = pscsi_free_device,
.transport_complete = pscsi_transport_complete,
- .execute_cmd = pscsi_execute_cmd,
+ .parse_cdb = pscsi_parse_cdb,
.check_configfs_dev_params = pscsi_check_configfs_dev_params,
.set_configfs_dev_params = pscsi_set_configfs_dev_params,
.show_configfs_dev_params = pscsi_show_configfs_dev_params,
diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c
index d0ceb87..d00bbe3 100644
--- a/drivers/target/target_core_rd.c
+++ b/drivers/target/target_core_rd.c
@@ -284,9 +284,11 @@
return NULL;
}
-static int rd_execute_cmd(struct se_cmd *cmd, struct scatterlist *sgl,
- u32 sgl_nents, enum dma_data_direction data_direction)
+static int rd_execute_rw(struct se_cmd *cmd)
{
+ struct scatterlist *sgl = cmd->t_data_sg;
+ u32 sgl_nents = cmd->t_data_nents;
+ enum dma_data_direction data_direction = cmd->data_direction;
struct se_device *se_dev = cmd->se_dev;
struct rd_dev *dev = se_dev->dev_ptr;
struct rd_dev_sg_table *table;
@@ -460,6 +462,15 @@
return blocks_long;
}
+static struct spc_ops rd_spc_ops = {
+ .execute_rw = rd_execute_rw,
+};
+
+static int rd_parse_cdb(struct se_cmd *cmd)
+{
+ return sbc_parse_cdb(cmd, &rd_spc_ops);
+}
+
static struct se_subsystem_api rd_mcp_template = {
.name = "rd_mcp",
.transport_type = TRANSPORT_PLUGIN_VHBA_VDEV,
@@ -468,7 +479,7 @@
.allocate_virtdevice = rd_allocate_virtdevice,
.create_virtdevice = rd_create_virtdevice,
.free_device = rd_free_device,
- .execute_cmd = rd_execute_cmd,
+ .parse_cdb = rd_parse_cdb,
.check_configfs_dev_params = rd_check_configfs_dev_params,
.set_configfs_dev_params = rd_set_configfs_dev_params,
.show_configfs_dev_params = rd_show_configfs_dev_params,
diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
new file mode 100644
index 0000000..a9dd946
--- /dev/null
+++ b/drivers/target/target_core_sbc.c
@@ -0,0 +1,581 @@
+/*
+ * SCSI Block Commands (SBC) parsing and emulation.
+ *
+ * Copyright (c) 2002, 2003, 2004, 2005 PyX Technologies, Inc.
+ * Copyright (c) 2005, 2006, 2007 SBE, Inc.
+ * Copyright (c) 2007-2010 Rising Tide Systems
+ * Copyright (c) 2008-2010 Linux-iSCSI.org
+ *
+ * Nicholas A. Bellinger <nab@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ratelimit.h>
+#include <asm/unaligned.h>
+#include <scsi/scsi.h>
+
+#include <target/target_core_base.h>
+#include <target/target_core_backend.h>
+#include <target/target_core_fabric.h>
+
+#include "target_core_internal.h"
+#include "target_core_ua.h"
+
+
+static int sbc_emulate_readcapacity(struct se_cmd *cmd)
+{
+ struct se_device *dev = cmd->se_dev;
+ unsigned char *buf;
+ unsigned long long blocks_long = dev->transport->get_blocks(dev);
+ u32 blocks;
+
+ if (blocks_long >= 0x00000000ffffffff)
+ blocks = 0xffffffff;
+ else
+ blocks = (u32)blocks_long;
+
+ buf = transport_kmap_data_sg(cmd);
+
+ buf[0] = (blocks >> 24) & 0xff;
+ buf[1] = (blocks >> 16) & 0xff;
+ buf[2] = (blocks >> 8) & 0xff;
+ buf[3] = blocks & 0xff;
+ buf[4] = (dev->se_sub_dev->se_dev_attrib.block_size >> 24) & 0xff;
+ buf[5] = (dev->se_sub_dev->se_dev_attrib.block_size >> 16) & 0xff;
+ buf[6] = (dev->se_sub_dev->se_dev_attrib.block_size >> 8) & 0xff;
+ buf[7] = dev->se_sub_dev->se_dev_attrib.block_size & 0xff;
+
+ transport_kunmap_data_sg(cmd);
+
+ target_complete_cmd(cmd, GOOD);
+ return 0;
+}
+
+static int sbc_emulate_readcapacity_16(struct se_cmd *cmd)
+{
+ struct se_device *dev = cmd->se_dev;
+ unsigned char *buf;
+ unsigned long long blocks = dev->transport->get_blocks(dev);
+
+ buf = transport_kmap_data_sg(cmd);
+
+ buf[0] = (blocks >> 56) & 0xff;
+ buf[1] = (blocks >> 48) & 0xff;
+ buf[2] = (blocks >> 40) & 0xff;
+ buf[3] = (blocks >> 32) & 0xff;
+ buf[4] = (blocks >> 24) & 0xff;
+ buf[5] = (blocks >> 16) & 0xff;
+ buf[6] = (blocks >> 8) & 0xff;
+ buf[7] = blocks & 0xff;
+ buf[8] = (dev->se_sub_dev->se_dev_attrib.block_size >> 24) & 0xff;
+ buf[9] = (dev->se_sub_dev->se_dev_attrib.block_size >> 16) & 0xff;
+ buf[10] = (dev->se_sub_dev->se_dev_attrib.block_size >> 8) & 0xff;
+ buf[11] = dev->se_sub_dev->se_dev_attrib.block_size & 0xff;
+ /*
+ * Set Thin Provisioning Enable bit following sbc3r22 in section
+ * READ CAPACITY (16) byte 14 if emulate_tpu or emulate_tpws is enabled.
+ */
+ if (dev->se_sub_dev->se_dev_attrib.emulate_tpu || dev->se_sub_dev->se_dev_attrib.emulate_tpws)
+ buf[14] = 0x80;
+
+ transport_kunmap_data_sg(cmd);
+
+ target_complete_cmd(cmd, GOOD);
+ return 0;
+}
+
+int spc_get_write_same_sectors(struct se_cmd *cmd)
+{
+ u32 num_blocks;
+
+ if (cmd->t_task_cdb[0] == WRITE_SAME)
+ num_blocks = get_unaligned_be16(&cmd->t_task_cdb[7]);
+ else if (cmd->t_task_cdb[0] == WRITE_SAME_16)
+ num_blocks = get_unaligned_be32(&cmd->t_task_cdb[10]);
+ else /* WRITE_SAME_32 via VARIABLE_LENGTH_CMD */
+ num_blocks = get_unaligned_be32(&cmd->t_task_cdb[28]);
+
+ /*
+ * Use the explicit range when non zero is supplied, otherwise calculate
+ * the remaining range based on ->get_blocks() - starting LBA.
+ */
+ if (num_blocks)
+ return num_blocks;
+
+ return cmd->se_dev->transport->get_blocks(cmd->se_dev) -
+ cmd->t_task_lba + 1;
+}
+EXPORT_SYMBOL(spc_get_write_same_sectors);
+
+static int sbc_emulate_verify(struct se_cmd *cmd)
+{
+ target_complete_cmd(cmd, GOOD);
+ return 0;
+}
+
+static inline u32 sbc_get_size(struct se_cmd *cmd, u32 sectors)
+{
+ return cmd->se_dev->se_sub_dev->se_dev_attrib.block_size * sectors;
+}
+
+static int sbc_check_valid_sectors(struct se_cmd *cmd)
+{
+ struct se_device *dev = cmd->se_dev;
+ unsigned long long end_lba;
+ u32 sectors;
+
+ sectors = cmd->data_length / dev->se_sub_dev->se_dev_attrib.block_size;
+ end_lba = dev->transport->get_blocks(dev) + 1;
+
+ if (cmd->t_task_lba + sectors > end_lba) {
+ pr_err("target: lba %llu, sectors %u exceeds end lba %llu\n",
+ cmd->t_task_lba, sectors, end_lba);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static inline u32 transport_get_sectors_6(unsigned char *cdb)
+{
+ /*
+ * Use 8-bit sector value. SBC-3 says:
+ *
+ * A TRANSFER LENGTH field set to zero specifies that 256
+ * logical blocks shall be written. Any other value
+ * specifies the number of logical blocks that shall be
+ * written.
+ */
+ return cdb[4] ? : 256;
+}
+
+static inline u32 transport_get_sectors_10(unsigned char *cdb)
+{
+ return (u32)(cdb[7] << 8) + cdb[8];
+}
+
+static inline u32 transport_get_sectors_12(unsigned char *cdb)
+{
+ return (u32)(cdb[6] << 24) + (cdb[7] << 16) + (cdb[8] << 8) + cdb[9];
+}
+
+static inline u32 transport_get_sectors_16(unsigned char *cdb)
+{
+ return (u32)(cdb[10] << 24) + (cdb[11] << 16) +
+ (cdb[12] << 8) + cdb[13];
+}
+
+/*
+ * Used for VARIABLE_LENGTH_CDB WRITE_32 and READ_32 variants
+ */
+static inline u32 transport_get_sectors_32(unsigned char *cdb)
+{
+ return (u32)(cdb[28] << 24) + (cdb[29] << 16) +
+ (cdb[30] << 8) + cdb[31];
+
+}
+
+static inline u32 transport_lba_21(unsigned char *cdb)
+{
+ return ((cdb[1] & 0x1f) << 16) | (cdb[2] << 8) | cdb[3];
+}
+
+static inline u32 transport_lba_32(unsigned char *cdb)
+{
+ return (cdb[2] << 24) | (cdb[3] << 16) | (cdb[4] << 8) | cdb[5];
+}
+
+static inline unsigned long long transport_lba_64(unsigned char *cdb)
+{
+ unsigned int __v1, __v2;
+
+ __v1 = (cdb[2] << 24) | (cdb[3] << 16) | (cdb[4] << 8) | cdb[5];
+ __v2 = (cdb[6] << 24) | (cdb[7] << 16) | (cdb[8] << 8) | cdb[9];
+
+ return ((unsigned long long)__v2) | (unsigned long long)__v1 << 32;
+}
+
+/*
+ * For VARIABLE_LENGTH_CDB w/ 32 byte extended CDBs
+ */
+static inline unsigned long long transport_lba_64_ext(unsigned char *cdb)
+{
+ unsigned int __v1, __v2;
+
+ __v1 = (cdb[12] << 24) | (cdb[13] << 16) | (cdb[14] << 8) | cdb[15];
+ __v2 = (cdb[16] << 24) | (cdb[17] << 16) | (cdb[18] << 8) | cdb[19];
+
+ return ((unsigned long long)__v2) | (unsigned long long)__v1 << 32;
+}
+
+static int sbc_write_same_supported(struct se_device *dev,
+ unsigned char *flags)
+{
+ if ((flags[0] & 0x04) || (flags[0] & 0x02)) {
+ pr_err("WRITE_SAME PBDATA and LBDATA"
+ " bits not supported for Block Discard"
+ " Emulation\n");
+ return -ENOSYS;
+ }
+
+ /*
+ * Currently for the emulated case we only accept
+ * tpws with the UNMAP=1 bit set.
+ */
+ if (!(flags[0] & 0x08)) {
+ pr_err("WRITE_SAME w/o UNMAP bit not"
+ " supported for Block Discard Emulation\n");
+ return -ENOSYS;
+ }
+
+ return 0;
+}
+
+static void xdreadwrite_callback(struct se_cmd *cmd)
+{
+ unsigned char *buf, *addr;
+ struct scatterlist *sg;
+ unsigned int offset;
+ int i;
+ int count;
+ /*
+ * From sbc3r22.pdf section 5.48 XDWRITEREAD (10) command
+ *
+ * 1) read the specified logical block(s);
+ * 2) transfer logical blocks from the data-out buffer;
+ * 3) XOR the logical blocks transferred from the data-out buffer with
+ * the logical blocks read, storing the resulting XOR data in a buffer;
+ * 4) if the DISABLE WRITE bit is set to zero, then write the logical
+ * blocks transferred from the data-out buffer; and
+ * 5) transfer the resulting XOR data to the data-in buffer.
+ */
+ buf = kmalloc(cmd->data_length, GFP_KERNEL);
+ if (!buf) {
+ pr_err("Unable to allocate xor_callback buf\n");
+ return;
+ }
+ /*
+ * Copy the scatterlist WRITE buffer located at cmd->t_data_sg
+ * into the locally allocated *buf
+ */
+ sg_copy_to_buffer(cmd->t_data_sg,
+ cmd->t_data_nents,
+ buf,
+ cmd->data_length);
+
+ /*
+ * Now perform the XOR against the BIDI read memory located at
+ * cmd->t_mem_bidi_list
+ */
+
+ offset = 0;
+ for_each_sg(cmd->t_bidi_data_sg, sg, cmd->t_bidi_data_nents, count) {
+ addr = kmap_atomic(sg_page(sg));
+ if (!addr)
+ goto out;
+
+ for (i = 0; i < sg->length; i++)
+ *(addr + sg->offset + i) ^= *(buf + offset + i);
+
+ offset += sg->length;
+ kunmap_atomic(addr);
+ }
+
+out:
+ kfree(buf);
+}
+
+int sbc_parse_cdb(struct se_cmd *cmd, struct spc_ops *ops)
+{
+ struct se_subsystem_dev *su_dev = cmd->se_dev->se_sub_dev;
+ struct se_device *dev = cmd->se_dev;
+ unsigned char *cdb = cmd->t_task_cdb;
+ unsigned int size;
+ u32 sectors = 0;
+ int ret;
+
+ switch (cdb[0]) {
+ case READ_6:
+ sectors = transport_get_sectors_6(cdb);
+ cmd->t_task_lba = transport_lba_21(cdb);
+ cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB;
+ cmd->execute_cmd = ops->execute_rw;
+ break;
+ case READ_10:
+ sectors = transport_get_sectors_10(cdb);
+ cmd->t_task_lba = transport_lba_32(cdb);
+ cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB;
+ cmd->execute_cmd = ops->execute_rw;
+ break;
+ case READ_12:
+ sectors = transport_get_sectors_12(cdb);
+ cmd->t_task_lba = transport_lba_32(cdb);
+ cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB;
+ cmd->execute_cmd = ops->execute_rw;
+ break;
+ case READ_16:
+ sectors = transport_get_sectors_16(cdb);
+ cmd->t_task_lba = transport_lba_64(cdb);
+ cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB;
+ cmd->execute_cmd = ops->execute_rw;
+ break;
+ case WRITE_6:
+ sectors = transport_get_sectors_6(cdb);
+ cmd->t_task_lba = transport_lba_21(cdb);
+ cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB;
+ cmd->execute_cmd = ops->execute_rw;
+ break;
+ case WRITE_10:
+ case WRITE_VERIFY:
+ sectors = transport_get_sectors_10(cdb);
+ cmd->t_task_lba = transport_lba_32(cdb);
+ if (cdb[1] & 0x8)
+ cmd->se_cmd_flags |= SCF_FUA;
+ cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB;
+ cmd->execute_cmd = ops->execute_rw;
+ break;
+ case WRITE_12:
+ sectors = transport_get_sectors_12(cdb);
+ cmd->t_task_lba = transport_lba_32(cdb);
+ if (cdb[1] & 0x8)
+ cmd->se_cmd_flags |= SCF_FUA;
+ cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB;
+ cmd->execute_cmd = ops->execute_rw;
+ break;
+ case WRITE_16:
+ sectors = transport_get_sectors_16(cdb);
+ cmd->t_task_lba = transport_lba_64(cdb);
+ if (cdb[1] & 0x8)
+ cmd->se_cmd_flags |= SCF_FUA;
+ cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB;
+ cmd->execute_cmd = ops->execute_rw;
+ break;
+ case XDWRITEREAD_10:
+ if ((cmd->data_direction != DMA_TO_DEVICE) ||
+ !(cmd->se_cmd_flags & SCF_BIDI))
+ goto out_invalid_cdb_field;
+ sectors = transport_get_sectors_10(cdb);
+
+ cmd->t_task_lba = transport_lba_32(cdb);
+ cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB;
+
+ /*
+ * Setup BIDI XOR callback to be run after I/O completion.
+ */
+ cmd->execute_cmd = ops->execute_rw;
+ cmd->transport_complete_callback = &xdreadwrite_callback;
+ if (cdb[1] & 0x8)
+ cmd->se_cmd_flags |= SCF_FUA;
+ break;
+ case VARIABLE_LENGTH_CMD:
+ {
+ u16 service_action = get_unaligned_be16(&cdb[8]);
+ switch (service_action) {
+ case XDWRITEREAD_32:
+ sectors = transport_get_sectors_32(cdb);
+
+ /*
+ * Use WRITE_32 and READ_32 opcodes for the emulated
+ * XDWRITE_READ_32 logic.
+ */
+ cmd->t_task_lba = transport_lba_64_ext(cdb);
+ cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB;
+
+ /*
+ * Setup BIDI XOR callback to be run during after I/O
+ * completion.
+ */
+ cmd->execute_cmd = ops->execute_rw;
+ cmd->transport_complete_callback = &xdreadwrite_callback;
+ if (cdb[1] & 0x8)
+ cmd->se_cmd_flags |= SCF_FUA;
+ break;
+ case WRITE_SAME_32:
+ if (!ops->execute_write_same)
+ goto out_unsupported_cdb;
+
+ sectors = transport_get_sectors_32(cdb);
+ if (!sectors) {
+ pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not"
+ " supported\n");
+ goto out_invalid_cdb_field;
+ }
+
+ size = sbc_get_size(cmd, 1);
+ cmd->t_task_lba = get_unaligned_be64(&cdb[12]);
+
+ if (sbc_write_same_supported(dev, &cdb[10]) < 0)
+ goto out_unsupported_cdb;
+ cmd->execute_cmd = ops->execute_write_same;
+ break;
+ default:
+ pr_err("VARIABLE_LENGTH_CMD service action"
+ " 0x%04x not supported\n", service_action);
+ goto out_unsupported_cdb;
+ }
+ break;
+ }
+ case READ_CAPACITY:
+ size = READ_CAP_LEN;
+ cmd->execute_cmd = sbc_emulate_readcapacity;
+ break;
+ case SERVICE_ACTION_IN:
+ switch (cmd->t_task_cdb[1] & 0x1f) {
+ case SAI_READ_CAPACITY_16:
+ cmd->execute_cmd = sbc_emulate_readcapacity_16;
+ break;
+ default:
+ pr_err("Unsupported SA: 0x%02x\n",
+ cmd->t_task_cdb[1] & 0x1f);
+ goto out_invalid_cdb_field;
+ }
+ size = (cdb[10] << 24) | (cdb[11] << 16) |
+ (cdb[12] << 8) | cdb[13];
+ break;
+ case SYNCHRONIZE_CACHE:
+ case SYNCHRONIZE_CACHE_16:
+ if (!ops->execute_sync_cache)
+ goto out_unsupported_cdb;
+
+ /*
+ * Extract LBA and range to be flushed for emulated SYNCHRONIZE_CACHE
+ */
+ if (cdb[0] == SYNCHRONIZE_CACHE) {
+ sectors = transport_get_sectors_10(cdb);
+ cmd->t_task_lba = transport_lba_32(cdb);
+ } else {
+ sectors = transport_get_sectors_16(cdb);
+ cmd->t_task_lba = transport_lba_64(cdb);
+ }
+
+ size = sbc_get_size(cmd, sectors);
+
+ /*
+ * Check to ensure that LBA + Range does not exceed past end of
+ * device for IBLOCK and FILEIO ->do_sync_cache() backend calls
+ */
+ if (cmd->t_task_lba || sectors) {
+ if (sbc_check_valid_sectors(cmd) < 0)
+ goto out_invalid_cdb_field;
+ }
+ cmd->execute_cmd = ops->execute_sync_cache;
+ break;
+ case UNMAP:
+ if (!ops->execute_unmap)
+ goto out_unsupported_cdb;
+
+ size = get_unaligned_be16(&cdb[7]);
+ cmd->execute_cmd = ops->execute_unmap;
+ break;
+ case WRITE_SAME_16:
+ if (!ops->execute_write_same)
+ goto out_unsupported_cdb;
+
+ sectors = transport_get_sectors_16(cdb);
+ if (!sectors) {
+ pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n");
+ goto out_invalid_cdb_field;
+ }
+
+ size = sbc_get_size(cmd, 1);
+ cmd->t_task_lba = get_unaligned_be64(&cdb[2]);
+
+ if (sbc_write_same_supported(dev, &cdb[1]) < 0)
+ goto out_unsupported_cdb;
+ cmd->execute_cmd = ops->execute_write_same;
+ break;
+ case WRITE_SAME:
+ if (!ops->execute_write_same)
+ goto out_unsupported_cdb;
+
+ sectors = transport_get_sectors_10(cdb);
+ if (!sectors) {
+ pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n");
+ goto out_invalid_cdb_field;
+ }
+
+ size = sbc_get_size(cmd, 1);
+ cmd->t_task_lba = get_unaligned_be32(&cdb[2]);
+
+ /*
+ * Follow sbcr26 with WRITE_SAME (10) and check for the existence
+ * of byte 1 bit 3 UNMAP instead of original reserved field
+ */
+ if (sbc_write_same_supported(dev, &cdb[1]) < 0)
+ goto out_unsupported_cdb;
+ cmd->execute_cmd = ops->execute_write_same;
+ break;
+ case VERIFY:
+ size = 0;
+ cmd->execute_cmd = sbc_emulate_verify;
+ break;
+ default:
+ ret = spc_parse_cdb(cmd, &size);
+ if (ret)
+ return ret;
+ }
+
+ /* reject any command that we don't have a handler for */
+ if (!(cmd->se_cmd_flags & SCF_SCSI_DATA_CDB) && !cmd->execute_cmd)
+ goto out_unsupported_cdb;
+
+ if (cmd->se_cmd_flags & SCF_SCSI_DATA_CDB) {
+ unsigned long long end_lba;
+
+ if (sectors > su_dev->se_dev_attrib.fabric_max_sectors) {
+ printk_ratelimited(KERN_ERR "SCSI OP %02xh with too"
+ " big sectors %u exceeds fabric_max_sectors:"
+ " %u\n", cdb[0], sectors,
+ su_dev->se_dev_attrib.fabric_max_sectors);
+ goto out_invalid_cdb_field;
+ }
+ if (sectors > su_dev->se_dev_attrib.hw_max_sectors) {
+ printk_ratelimited(KERN_ERR "SCSI OP %02xh with too"
+ " big sectors %u exceeds backend hw_max_sectors:"
+ " %u\n", cdb[0], sectors,
+ su_dev->se_dev_attrib.hw_max_sectors);
+ goto out_invalid_cdb_field;
+ }
+
+ end_lba = dev->transport->get_blocks(dev) + 1;
+ if (cmd->t_task_lba + sectors > end_lba) {
+ pr_err("cmd exceeds last lba %llu "
+ "(lba %llu, sectors %u)\n",
+ end_lba, cmd->t_task_lba, sectors);
+ goto out_invalid_cdb_field;
+ }
+
+ size = sbc_get_size(cmd, sectors);
+ }
+
+ ret = target_cmd_size_check(cmd, size);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+
+out_unsupported_cdb:
+ cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
+ cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE;
+ return -EINVAL;
+out_invalid_cdb_field:
+ cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
+ cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD;
+ return -EINVAL;
+}
+EXPORT_SYMBOL(sbc_parse_cdb);
diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_spc.c
similarity index 76%
rename from drivers/target/target_core_cdb.c
rename to drivers/target/target_core_spc.c
index 9888693..4c861de 100644
--- a/drivers/target/target_core_cdb.c
+++ b/drivers/target/target_core_spc.c
@@ -1,5 +1,5 @@
/*
- * CDB emulation for non-READ/WRITE commands.
+ * SCSI Primary Commands (SPC) parsing and emulation.
*
* Copyright (c) 2002, 2003, 2004, 2005 PyX Technologies, Inc.
* Copyright (c) 2005, 2006, 2007 SBE, Inc.
@@ -26,17 +26,21 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/unaligned.h>
+
#include <scsi/scsi.h>
+#include <scsi/scsi_tcq.h>
#include <target/target_core_base.h>
#include <target/target_core_backend.h>
#include <target/target_core_fabric.h>
#include "target_core_internal.h"
+#include "target_core_alua.h"
+#include "target_core_pr.h"
#include "target_core_ua.h"
-static void
-target_fill_alua_data(struct se_port *port, unsigned char *buf)
+
+static void spc_fill_alua_data(struct se_port *port, unsigned char *buf)
{
struct t10_alua_tg_pt_gp *tg_pt_gp;
struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem;
@@ -65,8 +69,7 @@
spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock);
}
-static int
-target_emulate_inquiry_std(struct se_cmd *cmd, char *buf)
+static int spc_emulate_inquiry_std(struct se_cmd *cmd, char *buf)
{
struct se_lun *lun = cmd->se_lun;
struct se_device *dev = cmd->se_dev;
@@ -93,7 +96,7 @@
* Enable SCCS and TPGS fields for Emulated ALUA
*/
if (dev->se_sub_dev->t10_alua.alua_type == SPC3_ALUA_EMULATED)
- target_fill_alua_data(lun->lun_sep, buf);
+ spc_fill_alua_data(lun->lun_sep, buf);
buf[7] = 0x2; /* CmdQue=1 */
@@ -106,8 +109,7 @@
}
/* unit serial number */
-static int
-target_emulate_evpd_80(struct se_cmd *cmd, unsigned char *buf)
+static int spc_emulate_evpd_80(struct se_cmd *cmd, unsigned char *buf)
{
struct se_device *dev = cmd->se_dev;
u16 len = 0;
@@ -127,8 +129,8 @@
return 0;
}
-static void
-target_parse_naa_6h_vendor_specific(struct se_device *dev, unsigned char *buf)
+static void spc_parse_naa_6h_vendor_specific(struct se_device *dev,
+ unsigned char *buf)
{
unsigned char *p = &dev->se_sub_dev->t10_wwn.unit_serial[0];
int cnt;
@@ -162,8 +164,7 @@
* Device identification VPD, for a complete list of
* DESIGNATOR TYPEs see spc4r17 Table 459.
*/
-static int
-target_emulate_evpd_83(struct se_cmd *cmd, unsigned char *buf)
+static int spc_emulate_evpd_83(struct se_cmd *cmd, unsigned char *buf)
{
struct se_device *dev = cmd->se_dev;
struct se_lun *lun = cmd->se_lun;
@@ -220,7 +221,7 @@
* VENDOR_SPECIFIC_IDENTIFIER and
* VENDOR_SPECIFIC_IDENTIFIER_EXTENTION
*/
- target_parse_naa_6h_vendor_specific(dev, &buf[off]);
+ spc_parse_naa_6h_vendor_specific(dev, &buf[off]);
len = 20;
off = (len + 4);
@@ -414,8 +415,7 @@
}
/* Extended INQUIRY Data VPD Page */
-static int
-target_emulate_evpd_86(struct se_cmd *cmd, unsigned char *buf)
+static int spc_emulate_evpd_86(struct se_cmd *cmd, unsigned char *buf)
{
buf[3] = 0x3c;
/* Set HEADSUP, ORDSUP, SIMPSUP */
@@ -428,15 +428,14 @@
}
/* Block Limits VPD page */
-static int
-target_emulate_evpd_b0(struct se_cmd *cmd, unsigned char *buf)
+static int spc_emulate_evpd_b0(struct se_cmd *cmd, unsigned char *buf)
{
struct se_device *dev = cmd->se_dev;
u32 max_sectors;
int have_tp = 0;
/*
- * Following sbc3r22 section 6.5.3 Block Limits VPD page, when
+ * Following spc3r22 section 6.5.3 Block Limits VPD page, when
* emulate_tpu=1 or emulate_tpws=1 we will be expect a
* different page length for Thin Provisioning.
*/
@@ -500,8 +499,7 @@
}
/* Block Device Characteristics VPD page */
-static int
-target_emulate_evpd_b1(struct se_cmd *cmd, unsigned char *buf)
+static int spc_emulate_evpd_b1(struct se_cmd *cmd, unsigned char *buf)
{
struct se_device *dev = cmd->se_dev;
@@ -513,13 +511,12 @@
}
/* Thin Provisioning VPD */
-static int
-target_emulate_evpd_b2(struct se_cmd *cmd, unsigned char *buf)
+static int spc_emulate_evpd_b2(struct se_cmd *cmd, unsigned char *buf)
{
struct se_device *dev = cmd->se_dev;
/*
- * From sbc3r22 section 6.5.4 Thin Provisioning VPD page:
+ * From spc3r22 section 6.5.4 Thin Provisioning VPD page:
*
* The PAGE LENGTH field is defined in SPC-4. If the DP bit is set to
* zero, then the page length shall be set to 0004h. If the DP bit
@@ -564,25 +561,23 @@
return 0;
}
-static int
-target_emulate_evpd_00(struct se_cmd *cmd, unsigned char *buf);
+static int spc_emulate_evpd_00(struct se_cmd *cmd, unsigned char *buf);
static struct {
uint8_t page;
int (*emulate)(struct se_cmd *, unsigned char *);
} evpd_handlers[] = {
- { .page = 0x00, .emulate = target_emulate_evpd_00 },
- { .page = 0x80, .emulate = target_emulate_evpd_80 },
- { .page = 0x83, .emulate = target_emulate_evpd_83 },
- { .page = 0x86, .emulate = target_emulate_evpd_86 },
- { .page = 0xb0, .emulate = target_emulate_evpd_b0 },
- { .page = 0xb1, .emulate = target_emulate_evpd_b1 },
- { .page = 0xb2, .emulate = target_emulate_evpd_b2 },
+ { .page = 0x00, .emulate = spc_emulate_evpd_00 },
+ { .page = 0x80, .emulate = spc_emulate_evpd_80 },
+ { .page = 0x83, .emulate = spc_emulate_evpd_83 },
+ { .page = 0x86, .emulate = spc_emulate_evpd_86 },
+ { .page = 0xb0, .emulate = spc_emulate_evpd_b0 },
+ { .page = 0xb1, .emulate = spc_emulate_evpd_b1 },
+ { .page = 0xb2, .emulate = spc_emulate_evpd_b2 },
};
/* supported vital product data pages */
-static int
-target_emulate_evpd_00(struct se_cmd *cmd, unsigned char *buf)
+static int spc_emulate_evpd_00(struct se_cmd *cmd, unsigned char *buf)
{
int p;
@@ -601,7 +596,7 @@
return 0;
}
-int target_emulate_inquiry(struct se_cmd *cmd)
+static int spc_emulate_inquiry(struct se_cmd *cmd)
{
struct se_device *dev = cmd->se_dev;
struct se_portal_group *tpg = cmd->se_lun->lun_sep->sep_tpg;
@@ -643,7 +638,7 @@
goto out;
}
- ret = target_emulate_inquiry_std(cmd, buf);
+ ret = spc_emulate_inquiry_std(cmd, buf);
goto out;
}
@@ -671,70 +666,7 @@
return ret;
}
-int target_emulate_readcapacity(struct se_cmd *cmd)
-{
- struct se_device *dev = cmd->se_dev;
- unsigned char *buf;
- unsigned long long blocks_long = dev->transport->get_blocks(dev);
- u32 blocks;
-
- if (blocks_long >= 0x00000000ffffffff)
- blocks = 0xffffffff;
- else
- blocks = (u32)blocks_long;
-
- buf = transport_kmap_data_sg(cmd);
-
- buf[0] = (blocks >> 24) & 0xff;
- buf[1] = (blocks >> 16) & 0xff;
- buf[2] = (blocks >> 8) & 0xff;
- buf[3] = blocks & 0xff;
- buf[4] = (dev->se_sub_dev->se_dev_attrib.block_size >> 24) & 0xff;
- buf[5] = (dev->se_sub_dev->se_dev_attrib.block_size >> 16) & 0xff;
- buf[6] = (dev->se_sub_dev->se_dev_attrib.block_size >> 8) & 0xff;
- buf[7] = dev->se_sub_dev->se_dev_attrib.block_size & 0xff;
-
- transport_kunmap_data_sg(cmd);
-
- target_complete_cmd(cmd, GOOD);
- return 0;
-}
-
-int target_emulate_readcapacity_16(struct se_cmd *cmd)
-{
- struct se_device *dev = cmd->se_dev;
- unsigned char *buf;
- unsigned long long blocks = dev->transport->get_blocks(dev);
-
- buf = transport_kmap_data_sg(cmd);
-
- buf[0] = (blocks >> 56) & 0xff;
- buf[1] = (blocks >> 48) & 0xff;
- buf[2] = (blocks >> 40) & 0xff;
- buf[3] = (blocks >> 32) & 0xff;
- buf[4] = (blocks >> 24) & 0xff;
- buf[5] = (blocks >> 16) & 0xff;
- buf[6] = (blocks >> 8) & 0xff;
- buf[7] = blocks & 0xff;
- buf[8] = (dev->se_sub_dev->se_dev_attrib.block_size >> 24) & 0xff;
- buf[9] = (dev->se_sub_dev->se_dev_attrib.block_size >> 16) & 0xff;
- buf[10] = (dev->se_sub_dev->se_dev_attrib.block_size >> 8) & 0xff;
- buf[11] = dev->se_sub_dev->se_dev_attrib.block_size & 0xff;
- /*
- * Set Thin Provisioning Enable bit following sbc3r22 in section
- * READ CAPACITY (16) byte 14 if emulate_tpu or emulate_tpws is enabled.
- */
- if (dev->se_sub_dev->se_dev_attrib.emulate_tpu || dev->se_sub_dev->se_dev_attrib.emulate_tpws)
- buf[14] = 0x80;
-
- transport_kunmap_data_sg(cmd);
-
- target_complete_cmd(cmd, GOOD);
- return 0;
-}
-
-static int
-target_modesense_rwrecovery(unsigned char *p)
+static int spc_modesense_rwrecovery(unsigned char *p)
{
p[0] = 0x01;
p[1] = 0x0a;
@@ -742,8 +674,7 @@
return 12;
}
-static int
-target_modesense_control(struct se_device *dev, unsigned char *p)
+static int spc_modesense_control(struct se_device *dev, unsigned char *p)
{
p[0] = 0x0a;
p[1] = 0x0a;
@@ -828,8 +759,7 @@
return 12;
}
-static int
-target_modesense_caching(struct se_device *dev, unsigned char *p)
+static int spc_modesense_caching(struct se_device *dev, unsigned char *p)
{
p[0] = 0x08;
p[1] = 0x12;
@@ -840,8 +770,7 @@
return 20;
}
-static void
-target_modesense_write_protect(unsigned char *buf, int type)
+static void spc_modesense_write_protect(unsigned char *buf, int type)
{
/*
* I believe that the WP bit (bit 7) in the mode header is the same for
@@ -856,8 +785,7 @@
}
}
-static void
-target_modesense_dpofua(unsigned char *buf, int type)
+static void spc_modesense_dpofua(unsigned char *buf, int type)
{
switch (type) {
case TYPE_DISK:
@@ -868,7 +796,7 @@
}
}
-int target_emulate_modesense(struct se_cmd *cmd)
+static int spc_emulate_modesense(struct se_cmd *cmd)
{
struct se_device *dev = cmd->se_dev;
char *cdb = cmd->t_task_cdb;
@@ -883,18 +811,18 @@
switch (cdb[2] & 0x3f) {
case 0x01:
- length = target_modesense_rwrecovery(&buf[offset]);
+ length = spc_modesense_rwrecovery(&buf[offset]);
break;
case 0x08:
- length = target_modesense_caching(dev, &buf[offset]);
+ length = spc_modesense_caching(dev, &buf[offset]);
break;
case 0x0a:
- length = target_modesense_control(dev, &buf[offset]);
+ length = spc_modesense_control(dev, &buf[offset]);
break;
case 0x3f:
- length = target_modesense_rwrecovery(&buf[offset]);
- length += target_modesense_caching(dev, &buf[offset+length]);
- length += target_modesense_control(dev, &buf[offset+length]);
+ length = spc_modesense_rwrecovery(&buf[offset]);
+ length += spc_modesense_caching(dev, &buf[offset+length]);
+ length += spc_modesense_control(dev, &buf[offset+length]);
break;
default:
pr_err("MODE SENSE: unimplemented page/subpage: 0x%02x/0x%02x\n",
@@ -912,11 +840,11 @@
if ((cmd->se_lun->lun_access & TRANSPORT_LUNFLAGS_READ_ONLY) ||
(cmd->se_deve &&
(cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY)))
- target_modesense_write_protect(&buf[3], type);
+ spc_modesense_write_protect(&buf[3], type);
if ((dev->se_sub_dev->se_dev_attrib.emulate_write_cache > 0) &&
(dev->se_sub_dev->se_dev_attrib.emulate_fua_write > 0))
- target_modesense_dpofua(&buf[3], type);
+ spc_modesense_dpofua(&buf[3], type);
if ((offset + 2) > cmd->data_length)
offset = cmd->data_length;
@@ -928,11 +856,11 @@
if ((cmd->se_lun->lun_access & TRANSPORT_LUNFLAGS_READ_ONLY) ||
(cmd->se_deve &&
(cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY)))
- target_modesense_write_protect(&buf[2], type);
+ spc_modesense_write_protect(&buf[2], type);
if ((dev->se_sub_dev->se_dev_attrib.emulate_write_cache > 0) &&
(dev->se_sub_dev->se_dev_attrib.emulate_fua_write > 0))
- target_modesense_dpofua(&buf[2], type);
+ spc_modesense_dpofua(&buf[2], type);
if ((offset + 1) > cmd->data_length)
offset = cmd->data_length;
@@ -946,7 +874,7 @@
return 0;
}
-int target_emulate_request_sense(struct se_cmd *cmd)
+static int spc_emulate_request_sense(struct se_cmd *cmd)
{
unsigned char *cdb = cmd->t_task_cdb;
unsigned char *buf;
@@ -1005,126 +933,172 @@
return 0;
}
-/*
- * Used for TCM/IBLOCK and TCM/FILEIO for block/blk-lib.c level discard support.
- * Note this is not used for TCM/pSCSI passthrough
- */
-int target_emulate_unmap(struct se_cmd *cmd)
+static int spc_emulate_testunitready(struct se_cmd *cmd)
+{
+ target_complete_cmd(cmd, GOOD);
+ return 0;
+}
+
+int spc_parse_cdb(struct se_cmd *cmd, unsigned int *size)
{
struct se_device *dev = cmd->se_dev;
- unsigned char *buf, *ptr = NULL;
- unsigned char *cdb = &cmd->t_task_cdb[0];
- sector_t lba;
- unsigned int size = cmd->data_length, range;
- int ret = 0, offset;
- unsigned short dl, bd_dl;
+ struct se_subsystem_dev *su_dev = dev->se_sub_dev;
+ unsigned char *cdb = cmd->t_task_cdb;
- if (!dev->transport->do_discard) {
- pr_err("UNMAP emulation not supported for: %s\n",
- dev->transport->name);
- cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE;
- return -ENOSYS;
- }
+ switch (cdb[0]) {
+ case MODE_SELECT:
+ *size = cdb[4];
+ break;
+ case MODE_SELECT_10:
+ *size = (cdb[7] << 8) + cdb[8];
+ break;
+ case MODE_SENSE:
+ *size = cdb[4];
+ cmd->execute_cmd = spc_emulate_modesense;
+ break;
+ case MODE_SENSE_10:
+ *size = (cdb[7] << 8) + cdb[8];
+ cmd->execute_cmd = spc_emulate_modesense;
+ break;
+ case LOG_SELECT:
+ case LOG_SENSE:
+ *size = (cdb[7] << 8) + cdb[8];
+ break;
+ case PERSISTENT_RESERVE_IN:
+ if (su_dev->t10_pr.res_type == SPC3_PERSISTENT_RESERVATIONS)
+ cmd->execute_cmd = target_scsi3_emulate_pr_in;
+ *size = (cdb[7] << 8) + cdb[8];
+ break;
+ case PERSISTENT_RESERVE_OUT:
+ if (su_dev->t10_pr.res_type == SPC3_PERSISTENT_RESERVATIONS)
+ cmd->execute_cmd = target_scsi3_emulate_pr_out;
+ *size = (cdb[7] << 8) + cdb[8];
+ break;
+ case RELEASE:
+ case RELEASE_10:
+ if (cdb[0] == RELEASE_10)
+ *size = (cdb[7] << 8) | cdb[8];
+ else
+ *size = cmd->data_length;
- /* First UNMAP block descriptor starts at 8 byte offset */
- offset = 8;
- size -= 8;
- dl = get_unaligned_be16(&cdb[0]);
- bd_dl = get_unaligned_be16(&cdb[2]);
+ if (su_dev->t10_pr.res_type != SPC_PASSTHROUGH)
+ cmd->execute_cmd = target_scsi2_reservation_release;
+ break;
+ case RESERVE:
+ case RESERVE_10:
+ /*
+ * The SPC-2 RESERVE does not contain a size in the SCSI CDB.
+ * Assume the passthrough or $FABRIC_MOD will tell us about it.
+ */
+ if (cdb[0] == RESERVE_10)
+ *size = (cdb[7] << 8) | cdb[8];
+ else
+ *size = cmd->data_length;
- buf = transport_kmap_data_sg(cmd);
+ /*
+ * Setup the legacy emulated handler for SPC-2 and
+ * >= SPC-3 compatible reservation handling (CRH=1)
+ * Otherwise, we assume the underlying SCSI logic is
+ * is running in SPC_PASSTHROUGH, and wants reservations
+ * emulation disabled.
+ */
+ if (su_dev->t10_pr.res_type != SPC_PASSTHROUGH)
+ cmd->execute_cmd = target_scsi2_reservation_reserve;
+ break;
+ case REQUEST_SENSE:
+ *size = cdb[4];
+ cmd->execute_cmd = spc_emulate_request_sense;
+ break;
+ case INQUIRY:
+ *size = (cdb[3] << 8) + cdb[4];
- ptr = &buf[offset];
- pr_debug("UNMAP: Sub: %s Using dl: %hu bd_dl: %hu size: %hu"
- " ptr: %p\n", dev->transport->name, dl, bd_dl, size, ptr);
-
- while (size) {
- lba = get_unaligned_be64(&ptr[0]);
- range = get_unaligned_be32(&ptr[8]);
- pr_debug("UNMAP: Using lba: %llu and range: %u\n",
- (unsigned long long)lba, range);
-
- ret = dev->transport->do_discard(dev, lba, range);
- if (ret < 0) {
- pr_err("blkdev_issue_discard() failed: %d\n",
- ret);
- goto err;
+ /*
+ * Do implict HEAD_OF_QUEUE processing for INQUIRY.
+ * See spc4r17 section 5.3
+ */
+ if (cmd->se_dev->dev_task_attr_type == SAM_TASK_ATTR_EMULATED)
+ cmd->sam_task_attr = MSG_HEAD_TAG;
+ cmd->execute_cmd = spc_emulate_inquiry;
+ break;
+ case SECURITY_PROTOCOL_IN:
+ case SECURITY_PROTOCOL_OUT:
+ *size = (cdb[6] << 24) | (cdb[7] << 16) | (cdb[8] << 8) | cdb[9];
+ break;
+ case EXTENDED_COPY:
+ case READ_ATTRIBUTE:
+ case RECEIVE_COPY_RESULTS:
+ case WRITE_ATTRIBUTE:
+ *size = (cdb[10] << 24) | (cdb[11] << 16) |
+ (cdb[12] << 8) | cdb[13];
+ break;
+ case RECEIVE_DIAGNOSTIC:
+ case SEND_DIAGNOSTIC:
+ *size = (cdb[3] << 8) | cdb[4];
+ break;
+ case WRITE_BUFFER:
+ *size = (cdb[6] << 16) + (cdb[7] << 8) + cdb[8];
+ break;
+ case REPORT_LUNS:
+ cmd->execute_cmd = target_report_luns;
+ *size = (cdb[6] << 24) | (cdb[7] << 16) | (cdb[8] << 8) | cdb[9];
+ /*
+ * Do implict HEAD_OF_QUEUE processing for REPORT_LUNS
+ * See spc4r17 section 5.3
+ */
+ if (cmd->se_dev->dev_task_attr_type == SAM_TASK_ATTR_EMULATED)
+ cmd->sam_task_attr = MSG_HEAD_TAG;
+ break;
+ case TEST_UNIT_READY:
+ cmd->execute_cmd = spc_emulate_testunitready;
+ *size = 0;
+ break;
+ case MAINTENANCE_IN:
+ if (dev->transport->get_device_type(dev) != TYPE_ROM) {
+ /*
+ * MAINTENANCE_IN from SCC-2
+ * Check for emulated MI_REPORT_TARGET_PGS
+ */
+ if ((cdb[1] & 0x1f) == MI_REPORT_TARGET_PGS &&
+ su_dev->t10_alua.alua_type == SPC3_ALUA_EMULATED) {
+ cmd->execute_cmd =
+ target_emulate_report_target_port_groups;
+ }
+ *size = get_unaligned_be32(&cdb[6]);
+ } else {
+ /*
+ * GPCMD_SEND_KEY from multi media commands
+ */
+ *size = get_unaligned_be16(&cdb[8]);
}
-
- ptr += 16;
- size -= 16;
- }
-
-err:
- transport_kunmap_data_sg(cmd);
- if (!ret)
- target_complete_cmd(cmd, GOOD);
- return ret;
-}
-
-/*
- * Used for TCM/IBLOCK and TCM/FILEIO for block/blk-lib.c level discard support.
- * Note this is not used for TCM/pSCSI passthrough
- */
-int target_emulate_write_same(struct se_cmd *cmd)
-{
- struct se_device *dev = cmd->se_dev;
- sector_t range;
- sector_t lba = cmd->t_task_lba;
- u32 num_blocks;
- int ret;
-
- if (!dev->transport->do_discard) {
- pr_err("WRITE_SAME emulation not supported"
- " for: %s\n", dev->transport->name);
+ break;
+ case MAINTENANCE_OUT:
+ if (dev->transport->get_device_type(dev) != TYPE_ROM) {
+ /*
+ * MAINTENANCE_OUT from SCC-2
+ * Check for emulated MO_SET_TARGET_PGS.
+ */
+ if (cdb[1] == MO_SET_TARGET_PGS &&
+ su_dev->t10_alua.alua_type == SPC3_ALUA_EMULATED) {
+ cmd->execute_cmd =
+ target_emulate_set_target_port_groups;
+ }
+ *size = get_unaligned_be32(&cdb[6]);
+ } else {
+ /*
+ * GPCMD_SEND_KEY from multi media commands
+ */
+ *size = get_unaligned_be16(&cdb[8]);
+ }
+ break;
+ default:
+ pr_warn("TARGET_CORE[%s]: Unsupported SCSI Opcode"
+ " 0x%02x, sending CHECK_CONDITION.\n",
+ cmd->se_tfo->get_fabric_name(), cdb[0]);
+ cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE;
- return -ENOSYS;
+ return -EINVAL;
}
- if (cmd->t_task_cdb[0] == WRITE_SAME)
- num_blocks = get_unaligned_be16(&cmd->t_task_cdb[7]);
- else if (cmd->t_task_cdb[0] == WRITE_SAME_16)
- num_blocks = get_unaligned_be32(&cmd->t_task_cdb[10]);
- else /* WRITE_SAME_32 via VARIABLE_LENGTH_CMD */
- num_blocks = get_unaligned_be32(&cmd->t_task_cdb[28]);
-
- /*
- * Use the explicit range when non zero is supplied, otherwise calculate
- * the remaining range based on ->get_blocks() - starting LBA.
- */
- if (num_blocks != 0)
- range = num_blocks;
- else
- range = (dev->transport->get_blocks(dev) - lba);
-
- pr_debug("WRITE_SAME UNMAP: LBA: %llu Range: %llu\n",
- (unsigned long long)lba, (unsigned long long)range);
-
- ret = dev->transport->do_discard(dev, lba, range);
- if (ret < 0) {
- pr_debug("blkdev_issue_discard() failed for WRITE_SAME\n");
- return ret;
- }
-
- target_complete_cmd(cmd, GOOD);
return 0;
}
-
-int target_emulate_synchronize_cache(struct se_cmd *cmd)
-{
- if (!cmd->se_dev->transport->do_sync_cache) {
- pr_err("SYNCHRONIZE_CACHE emulation not supported"
- " for: %s\n", cmd->se_dev->transport->name);
- cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE;
- return -ENOSYS;
- }
-
- cmd->se_dev->transport->do_sync_cache(cmd);
- return 0;
-}
-
-int target_emulate_noop(struct se_cmd *cmd)
-{
- target_complete_cmd(cmd, GOOD);
- return 0;
-}
+EXPORT_SYMBOL(spc_parse_cdb);
diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c
index 84caf1b..1c59a3c 100644
--- a/drivers/target/target_core_tmr.c
+++ b/drivers/target/target_core_tmr.c
@@ -295,9 +295,6 @@
list_move_tail(&cmd->state_list, &drain_task_list);
cmd->state_active = false;
-
- if (!list_empty(&cmd->execute_list))
- __target_remove_from_execute_list(cmd);
}
spin_unlock_irqrestore(&dev->execute_task_lock, flags);
@@ -354,57 +351,6 @@
}
}
-static void core_tmr_drain_cmd_list(
- struct se_device *dev,
- struct se_cmd *prout_cmd,
- struct se_node_acl *tmr_nacl,
- int tas,
- struct list_head *preempt_and_abort_list)
-{
- LIST_HEAD(drain_cmd_list);
- struct se_queue_obj *qobj = &dev->dev_queue_obj;
- struct se_cmd *cmd, *tcmd;
- unsigned long flags;
-
- /*
- * Release all commands remaining in the per-device command queue.
- *
- * This follows the same logic as above for the state list.
- */
- spin_lock_irqsave(&qobj->cmd_queue_lock, flags);
- list_for_each_entry_safe(cmd, tcmd, &qobj->qobj_list, se_queue_node) {
- /*
- * For PREEMPT_AND_ABORT usage, only process commands
- * with a matching reservation key.
- */
- if (target_check_cdb_and_preempt(preempt_and_abort_list, cmd))
- continue;
- /*
- * Not aborting PROUT PREEMPT_AND_ABORT CDB..
- */
- if (prout_cmd == cmd)
- continue;
-
- cmd->transport_state &= ~CMD_T_QUEUED;
- atomic_dec(&qobj->queue_cnt);
- list_move_tail(&cmd->se_queue_node, &drain_cmd_list);
- }
- spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
-
- while (!list_empty(&drain_cmd_list)) {
- cmd = list_entry(drain_cmd_list.next, struct se_cmd, se_queue_node);
- list_del_init(&cmd->se_queue_node);
-
- pr_debug("LUN_RESET: %s from Device Queue: cmd: %p t_state:"
- " %d t_fe_count: %d\n", (preempt_and_abort_list) ?
- "Preempt" : "", cmd, cmd->t_state,
- atomic_read(&cmd->t_fe_count));
-
- core_tmr_handle_tas_abort(tmr_nacl, cmd, tas,
- atomic_read(&cmd->t_fe_count));
- }
-}
-
int core_tmr_lun_reset(
struct se_device *dev,
struct se_tmr_req *tmr,
@@ -447,8 +393,7 @@
core_tmr_drain_tmr_list(dev, tmr, preempt_and_abort_list);
core_tmr_drain_state_list(dev, prout_cmd, tmr_nacl, tas,
preempt_and_abort_list);
- core_tmr_drain_cmd_list(dev, prout_cmd, tmr_nacl, tas,
- preempt_and_abort_list);
+
/*
* Clear any legacy SPC-2 reservation when called during
* LOGICAL UNIT RESET
diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c
index 8bd58e2..b8628a5 100644
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -77,8 +77,8 @@
lun = deve->se_lun;
spin_unlock_irq(&nacl->device_list_lock);
- core_update_device_list_for_node(lun, NULL, deve->mapped_lun,
- TRANSPORT_LUNFLAGS_NO_ACCESS, nacl, tpg, 0);
+ core_disable_device_list_for_node(lun, NULL, deve->mapped_lun,
+ TRANSPORT_LUNFLAGS_NO_ACCESS, nacl, tpg);
spin_lock_irq(&nacl->device_list_lock);
}
@@ -172,8 +172,8 @@
(lun_access == TRANSPORT_LUNFLAGS_READ_WRITE) ?
"READ-WRITE" : "READ-ONLY");
- core_update_device_list_for_node(lun, NULL, lun->unpacked_lun,
- lun_access, acl, tpg, 1);
+ core_enable_device_list_for_node(lun, NULL, lun->unpacked_lun,
+ lun_access, acl, tpg);
spin_lock(&tpg->tpg_lun_lock);
}
spin_unlock(&tpg->tpg_lun_lock);
@@ -306,10 +306,8 @@
* TPG LUNs if the fabric is not explictly asking for
* tpg_check_demo_mode_login_only() == 1.
*/
- if ((tpg->se_tpg_tfo->tpg_check_demo_mode_login_only != NULL) &&
- (tpg->se_tpg_tfo->tpg_check_demo_mode_login_only(tpg) == 1))
- do { ; } while (0);
- else
+ if ((tpg->se_tpg_tfo->tpg_check_demo_mode_login_only == NULL) ||
+ (tpg->se_tpg_tfo->tpg_check_demo_mode_login_only(tpg) != 1))
core_tpg_add_node_to_devs(acl, tpg);
spin_lock_irq(&tpg->acl_node_lock);
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index b05fdc0..0eaae23 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -66,15 +66,12 @@
struct kmem_cache *t10_alua_tg_pt_gp_cache;
struct kmem_cache *t10_alua_tg_pt_gp_mem_cache;
-static int transport_generic_write_pending(struct se_cmd *);
-static int transport_processing_thread(void *param);
-static int __transport_execute_tasks(struct se_device *dev, struct se_cmd *);
static void transport_complete_task_attr(struct se_cmd *cmd);
static void transport_handle_queue_full(struct se_cmd *cmd,
struct se_device *dev);
static int transport_generic_get_mem(struct se_cmd *cmd);
+static int target_get_sess_cmd(struct se_session *, struct se_cmd *, bool);
static void transport_put_cmd(struct se_cmd *cmd);
-static void transport_remove_cmd_from_queue(struct se_cmd *cmd);
static int transport_set_sense_codes(struct se_cmd *cmd, u8 asc, u8 ascq);
static void target_complete_ok_work(struct work_struct *work);
@@ -195,14 +192,6 @@
return new_index;
}
-static void transport_init_queue_obj(struct se_queue_obj *qobj)
-{
- atomic_set(&qobj->queue_cnt, 0);
- INIT_LIST_HEAD(&qobj->qobj_list);
- init_waitqueue_head(&qobj->thread_wq);
- spin_lock_init(&qobj->cmd_queue_lock);
-}
-
void transport_subsystem_check_init(void)
{
int ret;
@@ -243,7 +232,6 @@
INIT_LIST_HEAD(&se_sess->sess_list);
INIT_LIST_HEAD(&se_sess->sess_acl_list);
INIT_LIST_HEAD(&se_sess->sess_cmd_list);
- INIT_LIST_HEAD(&se_sess->sess_wait_list);
spin_lock_init(&se_sess->sess_cmd_lock);
kref_init(&se_sess->sess_kref);
@@ -315,7 +303,7 @@
}
EXPORT_SYMBOL(transport_register_session);
-static void target_release_session(struct kref *kref)
+void target_release_session(struct kref *kref)
{
struct se_session *se_sess = container_of(kref,
struct se_session, sess_kref);
@@ -332,6 +320,12 @@
void target_put_session(struct se_session *se_sess)
{
+ struct se_portal_group *tpg = se_sess->se_tpg;
+
+ if (tpg->se_tpg_tfo->put_session != NULL) {
+ tpg->se_tpg_tfo->put_session(se_sess);
+ return;
+ }
kref_put(&se_sess->sess_kref, target_release_session);
}
EXPORT_SYMBOL(target_put_session);
@@ -462,18 +456,7 @@
spin_unlock_irqrestore(&dev->execute_task_lock, flags);
}
-/* transport_cmd_check_stop():
- *
- * 'transport_off = 1' determines if CMD_T_ACTIVE should be cleared.
- * 'transport_off = 2' determines if task_dev_state should be removed.
- *
- * A non-zero u8 t_state sets cmd->t_state.
- * Returns 1 when command is stopped, else 0.
- */
-static int transport_cmd_check_stop(
- struct se_cmd *cmd,
- int transport_off,
- u8 t_state)
+static int transport_cmd_check_stop(struct se_cmd *cmd, bool remove_from_lists)
{
unsigned long flags;
@@ -487,13 +470,23 @@
__func__, __LINE__, cmd->se_tfo->get_task_tag(cmd));
cmd->transport_state &= ~CMD_T_ACTIVE;
- if (transport_off == 2)
+ if (remove_from_lists)
target_remove_from_state_list(cmd);
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
complete(&cmd->transport_lun_stop_comp);
return 1;
}
+
+ if (remove_from_lists) {
+ target_remove_from_state_list(cmd);
+
+ /*
+ * Clear struct se_cmd->se_lun before the handoff to FE.
+ */
+ cmd->se_lun = NULL;
+ }
+
/*
* Determine if frontend context caller is requesting the stopping of
* this command for frontend exceptions.
@@ -503,58 +496,36 @@
__func__, __LINE__,
cmd->se_tfo->get_task_tag(cmd));
- if (transport_off == 2)
- target_remove_from_state_list(cmd);
-
- /*
- * Clear struct se_cmd->se_lun before the transport_off == 2 handoff
- * to FE.
- */
- if (transport_off == 2)
- cmd->se_lun = NULL;
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
complete(&cmd->t_transport_stop_comp);
return 1;
}
- if (transport_off) {
- cmd->transport_state &= ~CMD_T_ACTIVE;
- if (transport_off == 2) {
- target_remove_from_state_list(cmd);
- /*
- * Clear struct se_cmd->se_lun before the transport_off == 2
- * handoff to fabric module.
- */
- cmd->se_lun = NULL;
- /*
- * Some fabric modules like tcm_loop can release
- * their internally allocated I/O reference now and
- * struct se_cmd now.
- *
- * Fabric modules are expected to return '1' here if the
- * se_cmd being passed is released at this point,
- * or zero if not being released.
- */
- if (cmd->se_tfo->check_stop_free != NULL) {
- spin_unlock_irqrestore(
- &cmd->t_state_lock, flags);
- return cmd->se_tfo->check_stop_free(cmd);
- }
+ cmd->transport_state &= ~CMD_T_ACTIVE;
+ if (remove_from_lists) {
+ /*
+ * Some fabric modules like tcm_loop can release
+ * their internally allocated I/O reference now and
+ * struct se_cmd now.
+ *
+ * Fabric modules are expected to return '1' here if the
+ * se_cmd being passed is released at this point,
+ * or zero if not being released.
+ */
+ if (cmd->se_tfo->check_stop_free != NULL) {
+ spin_unlock_irqrestore(&cmd->t_state_lock, flags);
+ return cmd->se_tfo->check_stop_free(cmd);
}
- spin_unlock_irqrestore(&cmd->t_state_lock, flags);
+ }
- return 0;
- } else if (t_state)
- cmd->t_state = t_state;
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
-
return 0;
}
static int transport_cmd_check_stop_to_fabric(struct se_cmd *cmd)
{
- return transport_cmd_check_stop(cmd, 2, 0);
+ return transport_cmd_check_stop(cmd, true);
}
static void transport_lun_remove_cmd(struct se_cmd *cmd)
@@ -585,79 +556,8 @@
if (transport_cmd_check_stop_to_fabric(cmd))
return;
- if (remove) {
- transport_remove_cmd_from_queue(cmd);
+ if (remove)
transport_put_cmd(cmd);
- }
-}
-
-static void transport_add_cmd_to_queue(struct se_cmd *cmd, int t_state,
- bool at_head)
-{
- struct se_device *dev = cmd->se_dev;
- struct se_queue_obj *qobj = &dev->dev_queue_obj;
- unsigned long flags;
-
- if (t_state) {
- spin_lock_irqsave(&cmd->t_state_lock, flags);
- cmd->t_state = t_state;
- cmd->transport_state |= CMD_T_ACTIVE;
- spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- }
-
- spin_lock_irqsave(&qobj->cmd_queue_lock, flags);
-
- /* If the cmd is already on the list, remove it before we add it */
- if (!list_empty(&cmd->se_queue_node))
- list_del(&cmd->se_queue_node);
- else
- atomic_inc(&qobj->queue_cnt);
-
- if (at_head)
- list_add(&cmd->se_queue_node, &qobj->qobj_list);
- else
- list_add_tail(&cmd->se_queue_node, &qobj->qobj_list);
- cmd->transport_state |= CMD_T_QUEUED;
- spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
-
- wake_up_interruptible(&qobj->thread_wq);
-}
-
-static struct se_cmd *
-transport_get_cmd_from_queue(struct se_queue_obj *qobj)
-{
- struct se_cmd *cmd;
- unsigned long flags;
-
- spin_lock_irqsave(&qobj->cmd_queue_lock, flags);
- if (list_empty(&qobj->qobj_list)) {
- spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
- return NULL;
- }
- cmd = list_first_entry(&qobj->qobj_list, struct se_cmd, se_queue_node);
-
- cmd->transport_state &= ~CMD_T_QUEUED;
- list_del_init(&cmd->se_queue_node);
- atomic_dec(&qobj->queue_cnt);
- spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
-
- return cmd;
-}
-
-static void transport_remove_cmd_from_queue(struct se_cmd *cmd)
-{
- struct se_queue_obj *qobj = &cmd->se_dev->dev_queue_obj;
- unsigned long flags;
-
- spin_lock_irqsave(&qobj->cmd_queue_lock, flags);
- if (!(cmd->transport_state & CMD_T_QUEUED)) {
- spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
- return;
- }
- cmd->transport_state &= ~CMD_T_QUEUED;
- atomic_dec(&qobj->queue_cnt);
- list_del_init(&cmd->se_queue_node);
- spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
}
static void target_complete_failure_work(struct work_struct *work)
@@ -736,68 +636,11 @@
spin_unlock_irqrestore(&dev->execute_task_lock, flags);
}
-static void __target_add_to_execute_list(struct se_cmd *cmd)
-{
- struct se_device *dev = cmd->se_dev;
- bool head_of_queue = false;
-
- if (!list_empty(&cmd->execute_list))
- return;
-
- if (dev->dev_task_attr_type == SAM_TASK_ATTR_EMULATED &&
- cmd->sam_task_attr == MSG_HEAD_TAG)
- head_of_queue = true;
-
- if (head_of_queue)
- list_add(&cmd->execute_list, &dev->execute_list);
- else
- list_add_tail(&cmd->execute_list, &dev->execute_list);
-
- atomic_inc(&dev->execute_tasks);
-
- if (cmd->state_active)
- return;
-
- if (head_of_queue)
- list_add(&cmd->state_list, &dev->state_list);
- else
- list_add_tail(&cmd->state_list, &dev->state_list);
-
- cmd->state_active = true;
-}
-
-static void target_add_to_execute_list(struct se_cmd *cmd)
-{
- unsigned long flags;
- struct se_device *dev = cmd->se_dev;
-
- spin_lock_irqsave(&dev->execute_task_lock, flags);
- __target_add_to_execute_list(cmd);
- spin_unlock_irqrestore(&dev->execute_task_lock, flags);
-}
-
-void __target_remove_from_execute_list(struct se_cmd *cmd)
-{
- list_del_init(&cmd->execute_list);
- atomic_dec(&cmd->se_dev->execute_tasks);
-}
-
-static void target_remove_from_execute_list(struct se_cmd *cmd)
-{
- struct se_device *dev = cmd->se_dev;
- unsigned long flags;
-
- if (WARN_ON(list_empty(&cmd->execute_list)))
- return;
-
- spin_lock_irqsave(&dev->execute_task_lock, flags);
- __target_remove_from_execute_list(cmd);
- spin_unlock_irqrestore(&dev->execute_task_lock, flags);
-}
-
/*
* Handle QUEUE_FULL / -EAGAIN and -ENOMEM status
*/
+static void transport_write_pending_qf(struct se_cmd *cmd);
+static void transport_complete_qf(struct se_cmd *cmd);
static void target_qf_do_work(struct work_struct *work)
{
@@ -821,7 +664,10 @@
(cmd->t_state == TRANSPORT_COMPLETE_QF_WP) ? "WRITE_PENDING"
: "UNKNOWN");
- transport_add_cmd_to_queue(cmd, cmd->t_state, true);
+ if (cmd->t_state == TRANSPORT_COMPLETE_QF_WP)
+ transport_write_pending_qf(cmd);
+ else if (cmd->t_state == TRANSPORT_COMPLETE_QF_OK)
+ transport_complete_qf(cmd);
}
}
@@ -868,8 +714,7 @@
break;
}
- *bl += sprintf(b + *bl, " Execute/Max Queue Depth: %d/%d",
- atomic_read(&dev->execute_tasks), dev->queue_depth);
+ *bl += sprintf(b + *bl, " Max Queue Depth: %d", dev->queue_depth);
*bl += sprintf(b + *bl, " SectorSize: %u HwMaxSectors: %u\n",
dev->se_sub_dev->se_dev_attrib.block_size,
dev->se_sub_dev->se_dev_attrib.hw_max_sectors);
@@ -1206,7 +1051,6 @@
return NULL;
}
- transport_init_queue_obj(&dev->dev_queue_obj);
dev->dev_flags = device_flags;
dev->dev_status |= TRANSPORT_DEVICE_DEACTIVATED;
dev->dev_ptr = transport_dev;
@@ -1216,7 +1060,6 @@
INIT_LIST_HEAD(&dev->dev_list);
INIT_LIST_HEAD(&dev->dev_sep_list);
INIT_LIST_HEAD(&dev->dev_tmr_list);
- INIT_LIST_HEAD(&dev->execute_list);
INIT_LIST_HEAD(&dev->delayed_cmd_list);
INIT_LIST_HEAD(&dev->state_list);
INIT_LIST_HEAD(&dev->qf_cmd_list);
@@ -1255,17 +1098,17 @@
* Setup the Asymmetric Logical Unit Assignment for struct se_device
*/
if (core_setup_alua(dev, force_pt) < 0)
- goto out;
+ goto err_dev_list;
/*
* Startup the struct se_device processing thread
*/
- dev->process_thread = kthread_run(transport_processing_thread, dev,
- "LIO_%s", dev->transport->name);
- if (IS_ERR(dev->process_thread)) {
- pr_err("Unable to create kthread: LIO_%s\n",
+ dev->tmr_wq = alloc_workqueue("tmr-%s", WQ_MEM_RECLAIM | WQ_UNBOUND, 1,
+ dev->transport->name);
+ if (!dev->tmr_wq) {
+ pr_err("Unable to create tmr workqueue for %s\n",
dev->transport->name);
- goto out;
+ goto err_dev_list;
}
/*
* Setup work_queue for QUEUE_FULL
@@ -1283,7 +1126,7 @@
if (!inquiry_prod || !inquiry_rev) {
pr_err("All non TCM/pSCSI plugins require"
" INQUIRY consts\n");
- goto out;
+ goto err_wq;
}
strncpy(&dev->se_sub_dev->t10_wwn.vendor[0], "LIO-ORG", 8);
@@ -1293,9 +1136,10 @@
scsi_dump_inquiry(dev);
return dev;
-out:
- kthread_stop(dev->process_thread);
+err_wq:
+ destroy_workqueue(dev->tmr_wq);
+err_dev_list:
spin_lock(&hba->device_lock);
list_del(&dev->dev_list);
hba->dev_count--;
@@ -1309,35 +1153,54 @@
}
EXPORT_SYMBOL(transport_add_device_to_core_hba);
-/* transport_generic_prepare_cdb():
- *
- * Since the Initiator sees iSCSI devices as LUNs, the SCSI CDB will
- * contain the iSCSI LUN in bits 7-5 of byte 1 as per SAM-2.
- * The point of this is since we are mapping iSCSI LUNs to
- * SCSI Target IDs having a non-zero LUN in the CDB will throw the
- * devices and HBAs for a loop.
- */
-static inline void transport_generic_prepare_cdb(
- unsigned char *cdb)
+int target_cmd_size_check(struct se_cmd *cmd, unsigned int size)
{
- switch (cdb[0]) {
- case READ_10: /* SBC - RDProtect */
- case READ_12: /* SBC - RDProtect */
- case READ_16: /* SBC - RDProtect */
- case SEND_DIAGNOSTIC: /* SPC - SELF-TEST Code */
- case VERIFY: /* SBC - VRProtect */
- case VERIFY_16: /* SBC - VRProtect */
- case WRITE_VERIFY: /* SBC - VRProtect */
- case WRITE_VERIFY_12: /* SBC - VRProtect */
- case MAINTENANCE_IN: /* SPC - Parameter Data Format for SA RTPG */
- break;
- default:
- cdb[1] &= 0x1f; /* clear logical unit number */
- break;
- }
-}
+ struct se_device *dev = cmd->se_dev;
-static int transport_generic_cmd_sequencer(struct se_cmd *, unsigned char *);
+ if (cmd->unknown_data_length) {
+ cmd->data_length = size;
+ } else if (size != cmd->data_length) {
+ pr_warn("TARGET_CORE[%s]: Expected Transfer Length:"
+ " %u does not match SCSI CDB Length: %u for SAM Opcode:"
+ " 0x%02x\n", cmd->se_tfo->get_fabric_name(),
+ cmd->data_length, size, cmd->t_task_cdb[0]);
+
+ cmd->cmd_spdtl = size;
+
+ if (cmd->data_direction == DMA_TO_DEVICE) {
+ pr_err("Rejecting underflow/overflow"
+ " WRITE data\n");
+ goto out_invalid_cdb_field;
+ }
+ /*
+ * Reject READ_* or WRITE_* with overflow/underflow for
+ * type SCF_SCSI_DATA_CDB.
+ */
+ if (dev->se_sub_dev->se_dev_attrib.block_size != 512) {
+ pr_err("Failing OVERFLOW/UNDERFLOW for LBA op"
+ " CDB on non 512-byte sector setup subsystem"
+ " plugin: %s\n", dev->transport->name);
+ /* Returns CHECK_CONDITION + INVALID_CDB_FIELD */
+ goto out_invalid_cdb_field;
+ }
+
+ if (size > cmd->data_length) {
+ cmd->se_cmd_flags |= SCF_OVERFLOW_BIT;
+ cmd->residual_count = (size - cmd->data_length);
+ } else {
+ cmd->se_cmd_flags |= SCF_UNDERFLOW_BIT;
+ cmd->residual_count = (cmd->data_length - size);
+ }
+ cmd->data_length = size;
+ }
+
+ return 0;
+
+out_invalid_cdb_field:
+ cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
+ cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD;
+ return -EINVAL;
+}
/*
* Used by fabric modules containing a local struct se_cmd within their
@@ -1355,9 +1218,7 @@
INIT_LIST_HEAD(&cmd->se_lun_node);
INIT_LIST_HEAD(&cmd->se_delayed_node);
INIT_LIST_HEAD(&cmd->se_qf_node);
- INIT_LIST_HEAD(&cmd->se_queue_node);
INIT_LIST_HEAD(&cmd->se_cmd_list);
- INIT_LIST_HEAD(&cmd->execute_list);
INIT_LIST_HEAD(&cmd->state_list);
init_completion(&cmd->transport_lun_fe_stop_comp);
init_completion(&cmd->transport_lun_stop_comp);
@@ -1412,9 +1273,12 @@
struct se_cmd *cmd,
unsigned char *cdb)
{
+ struct se_subsystem_dev *su_dev = cmd->se_dev->se_sub_dev;
+ u32 pr_reg_type = 0;
+ u8 alua_ascq = 0;
+ unsigned long flags;
int ret;
- transport_generic_prepare_cdb(cdb);
/*
* Ensure that the received CDB is less than the max (252 + 8) bytes
* for VARIABLE_LENGTH_CMD
@@ -1451,15 +1315,66 @@
* Copy the original CDB into cmd->
*/
memcpy(cmd->t_task_cdb, cdb, scsi_command_size(cdb));
+
/*
- * Setup the received CDB based on SCSI defined opcodes and
- * perform unit attention, persistent reservations and ALUA
- * checks for virtual device backends. The cmd->t_task_cdb
- * pointer is expected to be setup before we reach this point.
+ * Check for an existing UNIT ATTENTION condition
*/
- ret = transport_generic_cmd_sequencer(cmd, cdb);
+ if (core_scsi3_ua_check(cmd, cdb) < 0) {
+ cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
+ cmd->scsi_sense_reason = TCM_CHECK_CONDITION_UNIT_ATTENTION;
+ return -EINVAL;
+ }
+
+ ret = su_dev->t10_alua.alua_state_check(cmd, cdb, &alua_ascq);
+ if (ret != 0) {
+ /*
+ * Set SCSI additional sense code (ASC) to 'LUN Not Accessible';
+ * The ALUA additional sense code qualifier (ASCQ) is determined
+ * by the ALUA primary or secondary access state..
+ */
+ if (ret > 0) {
+ pr_debug("[%s]: ALUA TG Port not available, "
+ "SenseKey: NOT_READY, ASC/ASCQ: "
+ "0x04/0x%02x\n",
+ cmd->se_tfo->get_fabric_name(), alua_ascq);
+
+ transport_set_sense_codes(cmd, 0x04, alua_ascq);
+ cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
+ cmd->scsi_sense_reason = TCM_CHECK_CONDITION_NOT_READY;
+ return -EINVAL;
+ }
+ cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
+ cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD;
+ return -EINVAL;
+ }
+
+ /*
+ * Check status for SPC-3 Persistent Reservations
+ */
+ if (su_dev->t10_pr.pr_ops.t10_reservation_check(cmd, &pr_reg_type)) {
+ if (su_dev->t10_pr.pr_ops.t10_seq_non_holder(
+ cmd, cdb, pr_reg_type) != 0) {
+ cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
+ cmd->se_cmd_flags |= SCF_SCSI_RESERVATION_CONFLICT;
+ cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT;
+ cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT;
+ return -EBUSY;
+ }
+ /*
+ * This means the CDB is allowed for the SCSI Initiator port
+ * when said port is *NOT* holding the legacy SPC-2 or
+ * SPC-3 Persistent Reservation.
+ */
+ }
+
+ ret = cmd->se_dev->transport->parse_cdb(cmd);
if (ret < 0)
return ret;
+
+ spin_lock_irqsave(&cmd->t_state_lock, flags);
+ cmd->se_cmd_flags |= SCF_SUPPORTED_SAM_OPCODE;
+ spin_unlock_irqrestore(&cmd->t_state_lock, flags);
+
/*
* Check for SAM Task Attribute Emulation
*/
@@ -1497,10 +1412,9 @@
return -EINVAL;
}
/*
- * Set TRANSPORT_NEW_CMD state and CMD_T_ACTIVE following
- * transport_generic_handle_cdb*() -> transport_add_cmd_to_queue()
- * in existing usage to ensure that outstanding descriptors are handled
- * correctly during shutdown via transport_wait_for_tasks()
+ * Set TRANSPORT_NEW_CMD state and CMD_T_ACTIVE to ensure that
+ * outstanding descriptors are handled correctly during shutdown via
+ * transport_wait_for_tasks()
*
* Also, we don't take cmd->t_state_lock here as we only expect
* this to be called for initial descriptor submission.
@@ -1534,10 +1448,14 @@
* @data_dir: DMA data direction
* @flags: flags for command submission from target_sc_flags_tables
*
+ * Returns non zero to signal active I/O shutdown failure. All other
+ * setup exceptions will be returned as a SCSI CHECK_CONDITION response,
+ * but still return zero here.
+ *
* This may only be called from process context, and also currently
* assumes internal allocation of fabric payload buffer by target-core.
**/
-void target_submit_cmd(struct se_cmd *se_cmd, struct se_session *se_sess,
+int target_submit_cmd(struct se_cmd *se_cmd, struct se_session *se_sess,
unsigned char *cdb, unsigned char *sense, u32 unpacked_lun,
u32 data_length, int task_attr, int data_dir, int flags)
{
@@ -1563,7 +1481,9 @@
* for fabrics using TARGET_SCF_ACK_KREF that expect a second
* kref_put() to happen during fabric packet acknowledgement.
*/
- target_get_sess_cmd(se_sess, se_cmd, (flags & TARGET_SCF_ACK_KREF));
+ rc = target_get_sess_cmd(se_sess, se_cmd, (flags & TARGET_SCF_ACK_KREF));
+ if (rc)
+ return rc;
/*
* Signal bidirectional data payloads to target-core
*/
@@ -1576,16 +1496,13 @@
transport_send_check_condition_and_sense(se_cmd,
se_cmd->scsi_sense_reason, 0);
target_put_sess_cmd(se_sess, se_cmd);
- return;
+ return 0;
}
- /*
- * Sanitize CDBs via transport_generic_cmd_sequencer() and
- * allocate the necessary tasks to complete the received CDB+data
- */
+
rc = target_setup_cmd_from_cdb(se_cmd, cdb);
if (rc != 0) {
transport_generic_request_failure(se_cmd);
- return;
+ return 0;
}
/*
@@ -1594,14 +1511,8 @@
*/
core_alua_check_nonop_delay(se_cmd);
- /*
- * Dispatch se_cmd descriptor to se_lun->lun_se_dev backend
- * for immediate execution of READs, otherwise wait for
- * transport_generic_handle_data() to be called for WRITEs
- * when fabric has filled the incoming buffer.
- */
transport_handle_cdb_direct(se_cmd);
- return;
+ return 0;
}
EXPORT_SYMBOL(target_submit_cmd);
@@ -1656,7 +1567,11 @@
se_cmd->se_tmr_req->ref_task_tag = tag;
/* See target_submit_cmd for commentary */
- target_get_sess_cmd(se_sess, se_cmd, (flags & TARGET_SCF_ACK_KREF));
+ ret = target_get_sess_cmd(se_sess, se_cmd, (flags & TARGET_SCF_ACK_KREF));
+ if (ret) {
+ core_tmr_release_req(se_cmd->se_tmr_req);
+ return ret;
+ }
ret = transport_lookup_tmr_lun(se_cmd, unpacked_lun);
if (ret) {
@@ -1674,67 +1589,6 @@
EXPORT_SYMBOL(target_submit_tmr);
/*
- * Used by fabric module frontends defining a TFO->new_cmd_map() caller
- * to queue up a newly setup se_cmd w/ TRANSPORT_NEW_CMD_MAP in order to
- * complete setup in TCM process context w/ TFO->new_cmd_map().
- */
-int transport_generic_handle_cdb_map(
- struct se_cmd *cmd)
-{
- if (!cmd->se_lun) {
- dump_stack();
- pr_err("cmd->se_lun is NULL\n");
- return -EINVAL;
- }
-
- transport_add_cmd_to_queue(cmd, TRANSPORT_NEW_CMD_MAP, false);
- return 0;
-}
-EXPORT_SYMBOL(transport_generic_handle_cdb_map);
-
-/* transport_generic_handle_data():
- *
- *
- */
-int transport_generic_handle_data(
- struct se_cmd *cmd)
-{
- /*
- * For the software fabric case, then we assume the nexus is being
- * failed/shutdown when signals are pending from the kthread context
- * caller, so we return a failure. For the HW target mode case running
- * in interrupt code, the signal_pending() check is skipped.
- */
- if (!in_interrupt() && signal_pending(current))
- return -EPERM;
- /*
- * If the received CDB has aleady been ABORTED by the generic
- * target engine, we now call transport_check_aborted_status()
- * to queue any delated TASK_ABORTED status for the received CDB to the
- * fabric module as we are expecting no further incoming DATA OUT
- * sequences at this point.
- */
- if (transport_check_aborted_status(cmd, 1) != 0)
- return 0;
-
- transport_add_cmd_to_queue(cmd, TRANSPORT_PROCESS_WRITE, false);
- return 0;
-}
-EXPORT_SYMBOL(transport_generic_handle_data);
-
-/* transport_generic_handle_tmr():
- *
- *
- */
-int transport_generic_handle_tmr(
- struct se_cmd *cmd)
-{
- transport_add_cmd_to_queue(cmd, TRANSPORT_PROCESS_TMR, false);
- return 0;
-}
-EXPORT_SYMBOL(transport_generic_handle_tmr);
-
-/*
* If the cmd is active, request it to be stopped and sleep until it
* has completed.
*/
@@ -1791,6 +1645,7 @@
case TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE:
case TCM_UNKNOWN_MODE_PAGE:
case TCM_WRITE_PROTECTED:
+ case TCM_ADDRESS_OUT_OF_RANGE:
case TCM_CHECK_CONDITION_ABORT_CMD:
case TCM_CHECK_CONDITION_UNIT_ATTENTION:
case TCM_CHECK_CONDITION_NOT_READY:
@@ -1826,13 +1681,7 @@
cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE;
break;
}
- /*
- * If a fabric does not define a cmd->se_tfo->new_cmd_map caller,
- * make the call to transport_send_check_condition_and_sense()
- * directly. Otherwise expect the fabric to make the call to
- * transport_send_check_condition_and_sense() after handling
- * possible unsoliticied write data payloads.
- */
+
ret = transport_send_check_condition_and_sense(cmd,
cmd->scsi_sense_reason, 0);
if (ret == -EAGAIN || ret == -ENOMEM)
@@ -1850,406 +1699,123 @@
}
EXPORT_SYMBOL(transport_generic_request_failure);
-static inline u32 transport_lba_21(unsigned char *cdb)
+static void __target_execute_cmd(struct se_cmd *cmd)
{
- return ((cdb[1] & 0x1f) << 16) | (cdb[2] << 8) | cdb[3];
+ int error = 0;
+
+ spin_lock_irq(&cmd->t_state_lock);
+ cmd->transport_state |= (CMD_T_BUSY|CMD_T_SENT);
+ spin_unlock_irq(&cmd->t_state_lock);
+
+ if (cmd->execute_cmd)
+ error = cmd->execute_cmd(cmd);
+
+ if (error) {
+ spin_lock_irq(&cmd->t_state_lock);
+ cmd->transport_state &= ~(CMD_T_BUSY|CMD_T_SENT);
+ spin_unlock_irq(&cmd->t_state_lock);
+
+ transport_generic_request_failure(cmd);
+ }
}
-static inline u32 transport_lba_32(unsigned char *cdb)
+void target_execute_cmd(struct se_cmd *cmd)
{
- return (cdb[2] << 24) | (cdb[3] << 16) | (cdb[4] << 8) | cdb[5];
-}
+ struct se_device *dev = cmd->se_dev;
-static inline unsigned long long transport_lba_64(unsigned char *cdb)
-{
- unsigned int __v1, __v2;
+ /*
+ * If the received CDB has aleady been aborted stop processing it here.
+ */
+ if (transport_check_aborted_status(cmd, 1))
+ return;
- __v1 = (cdb[2] << 24) | (cdb[3] << 16) | (cdb[4] << 8) | cdb[5];
- __v2 = (cdb[6] << 24) | (cdb[7] << 16) | (cdb[8] << 8) | cdb[9];
+ /*
+ * Determine if IOCTL context caller in requesting the stopping of this
+ * command for LUN shutdown purposes.
+ */
+ spin_lock_irq(&cmd->t_state_lock);
+ if (cmd->transport_state & CMD_T_LUN_STOP) {
+ pr_debug("%s:%d CMD_T_LUN_STOP for ITT: 0x%08x\n",
+ __func__, __LINE__, cmd->se_tfo->get_task_tag(cmd));
- return ((unsigned long long)__v2) | (unsigned long long)__v1 << 32;
-}
+ cmd->transport_state &= ~CMD_T_ACTIVE;
+ spin_unlock_irq(&cmd->t_state_lock);
+ complete(&cmd->transport_lun_stop_comp);
+ return;
+ }
+ /*
+ * Determine if frontend context caller is requesting the stopping of
+ * this command for frontend exceptions.
+ */
+ if (cmd->transport_state & CMD_T_STOP) {
+ pr_debug("%s:%d CMD_T_STOP for ITT: 0x%08x\n",
+ __func__, __LINE__,
+ cmd->se_tfo->get_task_tag(cmd));
-/*
- * For VARIABLE_LENGTH_CDB w/ 32 byte extended CDBs
- */
-static inline unsigned long long transport_lba_64_ext(unsigned char *cdb)
-{
- unsigned int __v1, __v2;
+ spin_unlock_irq(&cmd->t_state_lock);
+ complete(&cmd->t_transport_stop_comp);
+ return;
+ }
- __v1 = (cdb[12] << 24) | (cdb[13] << 16) | (cdb[14] << 8) | cdb[15];
- __v2 = (cdb[16] << 24) | (cdb[17] << 16) | (cdb[18] << 8) | cdb[19];
+ cmd->t_state = TRANSPORT_PROCESSING;
+ spin_unlock_irq(&cmd->t_state_lock);
- return ((unsigned long long)__v2) | (unsigned long long)__v1 << 32;
-}
+ if (dev->dev_task_attr_type != SAM_TASK_ATTR_EMULATED)
+ goto execute;
-static void transport_set_supported_SAM_opcode(struct se_cmd *se_cmd)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&se_cmd->t_state_lock, flags);
- se_cmd->se_cmd_flags |= SCF_SUPPORTED_SAM_OPCODE;
- spin_unlock_irqrestore(&se_cmd->t_state_lock, flags);
-}
-
-/*
- * Called from Fabric Module context from transport_execute_tasks()
- *
- * The return of this function determins if the tasks from struct se_cmd
- * get added to the execution queue in transport_execute_tasks(),
- * or are added to the delayed or ordered lists here.
- */
-static inline int transport_execute_task_attr(struct se_cmd *cmd)
-{
- if (cmd->se_dev->dev_task_attr_type != SAM_TASK_ATTR_EMULATED)
- return 1;
/*
* Check for the existence of HEAD_OF_QUEUE, and if true return 1
* to allow the passed struct se_cmd list of tasks to the front of the list.
*/
- if (cmd->sam_task_attr == MSG_HEAD_TAG) {
- pr_debug("Added HEAD_OF_QUEUE for CDB:"
- " 0x%02x, se_ordered_id: %u\n",
- cmd->t_task_cdb[0],
- cmd->se_ordered_id);
- return 1;
- } else if (cmd->sam_task_attr == MSG_ORDERED_TAG) {
- atomic_inc(&cmd->se_dev->dev_ordered_sync);
+ switch (cmd->sam_task_attr) {
+ case MSG_HEAD_TAG:
+ pr_debug("Added HEAD_OF_QUEUE for CDB: 0x%02x, "
+ "se_ordered_id: %u\n",
+ cmd->t_task_cdb[0], cmd->se_ordered_id);
+ goto execute;
+ case MSG_ORDERED_TAG:
+ atomic_inc(&dev->dev_ordered_sync);
smp_mb__after_atomic_inc();
- pr_debug("Added ORDERED for CDB: 0x%02x to ordered"
- " list, se_ordered_id: %u\n",
- cmd->t_task_cdb[0],
- cmd->se_ordered_id);
+ pr_debug("Added ORDERED for CDB: 0x%02x to ordered list, "
+ " se_ordered_id: %u\n",
+ cmd->t_task_cdb[0], cmd->se_ordered_id);
+
/*
- * Add ORDERED command to tail of execution queue if
- * no other older commands exist that need to be
- * completed first.
+ * Execute an ORDERED command if no other older commands
+ * exist that need to be completed first.
*/
- if (!atomic_read(&cmd->se_dev->simple_cmds))
- return 1;
- } else {
+ if (!atomic_read(&dev->simple_cmds))
+ goto execute;
+ break;
+ default:
/*
* For SIMPLE and UNTAGGED Task Attribute commands
*/
- atomic_inc(&cmd->se_dev->simple_cmds);
+ atomic_inc(&dev->simple_cmds);
smp_mb__after_atomic_inc();
+ break;
}
- /*
- * Otherwise if one or more outstanding ORDERED task attribute exist,
- * add the dormant task(s) built for the passed struct se_cmd to the
- * execution queue and become in Active state for this struct se_device.
- */
- if (atomic_read(&cmd->se_dev->dev_ordered_sync) != 0) {
- /*
- * Otherwise, add cmd w/ tasks to delayed cmd queue that
- * will be drained upon completion of HEAD_OF_QUEUE task.
- */
- spin_lock(&cmd->se_dev->delayed_cmd_lock);
- cmd->se_cmd_flags |= SCF_DELAYED_CMD_FROM_SAM_ATTR;
- list_add_tail(&cmd->se_delayed_node,
- &cmd->se_dev->delayed_cmd_list);
- spin_unlock(&cmd->se_dev->delayed_cmd_lock);
+
+ if (atomic_read(&dev->dev_ordered_sync) != 0) {
+ spin_lock(&dev->delayed_cmd_lock);
+ list_add_tail(&cmd->se_delayed_node, &dev->delayed_cmd_list);
+ spin_unlock(&dev->delayed_cmd_lock);
pr_debug("Added CDB: 0x%02x Task Attr: 0x%02x to"
" delayed CMD list, se_ordered_id: %u\n",
cmd->t_task_cdb[0], cmd->sam_task_attr,
cmd->se_ordered_id);
- /*
- * Return zero to let transport_execute_tasks() know
- * not to add the delayed tasks to the execution list.
- */
- return 0;
+ return;
}
+
+execute:
/*
* Otherwise, no ORDERED task attributes exist..
*/
- return 1;
+ __target_execute_cmd(cmd);
}
-
-/*
- * Called from fabric module context in transport_generic_new_cmd() and
- * transport_generic_process_write()
- */
-static void transport_execute_tasks(struct se_cmd *cmd)
-{
- int add_tasks;
- struct se_device *se_dev = cmd->se_dev;
- /*
- * Call transport_cmd_check_stop() to see if a fabric exception
- * has occurred that prevents execution.
- */
- if (!transport_cmd_check_stop(cmd, 0, TRANSPORT_PROCESSING)) {
- /*
- * Check for SAM Task Attribute emulation and HEAD_OF_QUEUE
- * attribute for the tasks of the received struct se_cmd CDB
- */
- add_tasks = transport_execute_task_attr(cmd);
- if (add_tasks) {
- __transport_execute_tasks(se_dev, cmd);
- return;
- }
- }
- __transport_execute_tasks(se_dev, NULL);
-}
-
-static int __transport_execute_tasks(struct se_device *dev, struct se_cmd *new_cmd)
-{
- int error;
- struct se_cmd *cmd = NULL;
- unsigned long flags;
-
-check_depth:
- spin_lock_irq(&dev->execute_task_lock);
- if (new_cmd != NULL)
- __target_add_to_execute_list(new_cmd);
-
- if (list_empty(&dev->execute_list)) {
- spin_unlock_irq(&dev->execute_task_lock);
- return 0;
- }
- cmd = list_first_entry(&dev->execute_list, struct se_cmd, execute_list);
- __target_remove_from_execute_list(cmd);
- spin_unlock_irq(&dev->execute_task_lock);
-
- spin_lock_irqsave(&cmd->t_state_lock, flags);
- cmd->transport_state |= CMD_T_BUSY;
- cmd->transport_state |= CMD_T_SENT;
-
- spin_unlock_irqrestore(&cmd->t_state_lock, flags);
-
- if (cmd->execute_cmd)
- error = cmd->execute_cmd(cmd);
- else {
- error = dev->transport->execute_cmd(cmd, cmd->t_data_sg,
- cmd->t_data_nents, cmd->data_direction);
- }
-
- if (error != 0) {
- spin_lock_irqsave(&cmd->t_state_lock, flags);
- cmd->transport_state &= ~CMD_T_BUSY;
- cmd->transport_state &= ~CMD_T_SENT;
- spin_unlock_irqrestore(&cmd->t_state_lock, flags);
-
- transport_generic_request_failure(cmd);
- }
-
- new_cmd = NULL;
- goto check_depth;
-
- return 0;
-}
-
-static inline u32 transport_get_sectors_6(
- unsigned char *cdb,
- struct se_cmd *cmd,
- int *ret)
-{
- struct se_device *dev = cmd->se_dev;
-
- /*
- * Assume TYPE_DISK for non struct se_device objects.
- * Use 8-bit sector value.
- */
- if (!dev)
- goto type_disk;
-
- /*
- * Use 24-bit allocation length for TYPE_TAPE.
- */
- if (dev->transport->get_device_type(dev) == TYPE_TAPE)
- return (u32)(cdb[2] << 16) + (cdb[3] << 8) + cdb[4];
-
- /*
- * Everything else assume TYPE_DISK Sector CDB location.
- * Use 8-bit sector value. SBC-3 says:
- *
- * A TRANSFER LENGTH field set to zero specifies that 256
- * logical blocks shall be written. Any other value
- * specifies the number of logical blocks that shall be
- * written.
- */
-type_disk:
- return cdb[4] ? : 256;
-}
-
-static inline u32 transport_get_sectors_10(
- unsigned char *cdb,
- struct se_cmd *cmd,
- int *ret)
-{
- struct se_device *dev = cmd->se_dev;
-
- /*
- * Assume TYPE_DISK for non struct se_device objects.
- * Use 16-bit sector value.
- */
- if (!dev)
- goto type_disk;
-
- /*
- * XXX_10 is not defined in SSC, throw an exception
- */
- if (dev->transport->get_device_type(dev) == TYPE_TAPE) {
- *ret = -EINVAL;
- return 0;
- }
-
- /*
- * Everything else assume TYPE_DISK Sector CDB location.
- * Use 16-bit sector value.
- */
-type_disk:
- return (u32)(cdb[7] << 8) + cdb[8];
-}
-
-static inline u32 transport_get_sectors_12(
- unsigned char *cdb,
- struct se_cmd *cmd,
- int *ret)
-{
- struct se_device *dev = cmd->se_dev;
-
- /*
- * Assume TYPE_DISK for non struct se_device objects.
- * Use 32-bit sector value.
- */
- if (!dev)
- goto type_disk;
-
- /*
- * XXX_12 is not defined in SSC, throw an exception
- */
- if (dev->transport->get_device_type(dev) == TYPE_TAPE) {
- *ret = -EINVAL;
- return 0;
- }
-
- /*
- * Everything else assume TYPE_DISK Sector CDB location.
- * Use 32-bit sector value.
- */
-type_disk:
- return (u32)(cdb[6] << 24) + (cdb[7] << 16) + (cdb[8] << 8) + cdb[9];
-}
-
-static inline u32 transport_get_sectors_16(
- unsigned char *cdb,
- struct se_cmd *cmd,
- int *ret)
-{
- struct se_device *dev = cmd->se_dev;
-
- /*
- * Assume TYPE_DISK for non struct se_device objects.
- * Use 32-bit sector value.
- */
- if (!dev)
- goto type_disk;
-
- /*
- * Use 24-bit allocation length for TYPE_TAPE.
- */
- if (dev->transport->get_device_type(dev) == TYPE_TAPE)
- return (u32)(cdb[12] << 16) + (cdb[13] << 8) + cdb[14];
-
-type_disk:
- return (u32)(cdb[10] << 24) + (cdb[11] << 16) +
- (cdb[12] << 8) + cdb[13];
-}
-
-/*
- * Used for VARIABLE_LENGTH_CDB WRITE_32 and READ_32 variants
- */
-static inline u32 transport_get_sectors_32(
- unsigned char *cdb,
- struct se_cmd *cmd,
- int *ret)
-{
- /*
- * Assume TYPE_DISK for non struct se_device objects.
- * Use 32-bit sector value.
- */
- return (u32)(cdb[28] << 24) + (cdb[29] << 16) +
- (cdb[30] << 8) + cdb[31];
-
-}
-
-static inline u32 transport_get_size(
- u32 sectors,
- unsigned char *cdb,
- struct se_cmd *cmd)
-{
- struct se_device *dev = cmd->se_dev;
-
- if (dev->transport->get_device_type(dev) == TYPE_TAPE) {
- if (cdb[1] & 1) { /* sectors */
- return dev->se_sub_dev->se_dev_attrib.block_size * sectors;
- } else /* bytes */
- return sectors;
- }
-
- pr_debug("Returning block_size: %u, sectors: %u == %u for"
- " %s object\n", dev->se_sub_dev->se_dev_attrib.block_size,
- sectors, dev->se_sub_dev->se_dev_attrib.block_size * sectors,
- dev->transport->name);
-
- return dev->se_sub_dev->se_dev_attrib.block_size * sectors;
-}
-
-static void transport_xor_callback(struct se_cmd *cmd)
-{
- unsigned char *buf, *addr;
- struct scatterlist *sg;
- unsigned int offset;
- int i;
- int count;
- /*
- * From sbc3r22.pdf section 5.48 XDWRITEREAD (10) command
- *
- * 1) read the specified logical block(s);
- * 2) transfer logical blocks from the data-out buffer;
- * 3) XOR the logical blocks transferred from the data-out buffer with
- * the logical blocks read, storing the resulting XOR data in a buffer;
- * 4) if the DISABLE WRITE bit is set to zero, then write the logical
- * blocks transferred from the data-out buffer; and
- * 5) transfer the resulting XOR data to the data-in buffer.
- */
- buf = kmalloc(cmd->data_length, GFP_KERNEL);
- if (!buf) {
- pr_err("Unable to allocate xor_callback buf\n");
- return;
- }
- /*
- * Copy the scatterlist WRITE buffer located at cmd->t_data_sg
- * into the locally allocated *buf
- */
- sg_copy_to_buffer(cmd->t_data_sg,
- cmd->t_data_nents,
- buf,
- cmd->data_length);
-
- /*
- * Now perform the XOR against the BIDI read memory located at
- * cmd->t_mem_bidi_list
- */
-
- offset = 0;
- for_each_sg(cmd->t_bidi_data_sg, sg, cmd->t_bidi_data_nents, count) {
- addr = kmap_atomic(sg_page(sg));
- if (!addr)
- goto out;
-
- for (i = 0; i < sg->length; i++)
- *(addr + sg->offset + i) ^= *(buf + offset + i);
-
- offset += sg->length;
- kunmap_atomic(addr);
- }
-
-out:
- kfree(buf);
-}
+EXPORT_SYMBOL(target_execute_cmd);
/*
* Used to obtain Sense Data from underlying Linux/SCSI struct scsi_cmnd
@@ -2306,737 +1872,31 @@
return -1;
}
-static inline long long transport_dev_end_lba(struct se_device *dev)
-{
- return dev->transport->get_blocks(dev) + 1;
-}
-
-static int transport_cmd_get_valid_sectors(struct se_cmd *cmd)
-{
- struct se_device *dev = cmd->se_dev;
- u32 sectors;
-
- if (dev->transport->get_device_type(dev) != TYPE_DISK)
- return 0;
-
- sectors = (cmd->data_length / dev->se_sub_dev->se_dev_attrib.block_size);
-
- if ((cmd->t_task_lba + sectors) > transport_dev_end_lba(dev)) {
- pr_err("LBA: %llu Sectors: %u exceeds"
- " transport_dev_end_lba(): %llu\n",
- cmd->t_task_lba, sectors,
- transport_dev_end_lba(dev));
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int target_check_write_same_discard(unsigned char *flags, struct se_device *dev)
-{
- /*
- * Determine if the received WRITE_SAME is used to for direct
- * passthrough into Linux/SCSI with struct request via TCM/pSCSI
- * or we are signaling the use of internal WRITE_SAME + UNMAP=1
- * emulation for -> Linux/BLOCK disbard with TCM/IBLOCK code.
- */
- int passthrough = (dev->transport->transport_type ==
- TRANSPORT_PLUGIN_PHBA_PDEV);
-
- if (!passthrough) {
- if ((flags[0] & 0x04) || (flags[0] & 0x02)) {
- pr_err("WRITE_SAME PBDATA and LBDATA"
- " bits not supported for Block Discard"
- " Emulation\n");
- return -ENOSYS;
- }
- /*
- * Currently for the emulated case we only accept
- * tpws with the UNMAP=1 bit set.
- */
- if (!(flags[0] & 0x08)) {
- pr_err("WRITE_SAME w/o UNMAP bit not"
- " supported for Block Discard Emulation\n");
- return -ENOSYS;
- }
- }
-
- return 0;
-}
-
-/* transport_generic_cmd_sequencer():
- *
- * Generic Command Sequencer that should work for most DAS transport
- * drivers.
- *
- * Called from target_setup_cmd_from_cdb() in the $FABRIC_MOD
- * RX Thread.
- *
- * FIXME: Need to support other SCSI OPCODES where as well.
+/*
+ * Process all commands up to the last received ORDERED task attribute which
+ * requires another blocking boundary
*/
-static int transport_generic_cmd_sequencer(
- struct se_cmd *cmd,
- unsigned char *cdb)
+static void target_restart_delayed_cmds(struct se_device *dev)
{
- struct se_device *dev = cmd->se_dev;
- struct se_subsystem_dev *su_dev = dev->se_sub_dev;
- int ret = 0, sector_ret = 0, passthrough;
- u32 sectors = 0, size = 0, pr_reg_type = 0;
- u16 service_action;
- u8 alua_ascq = 0;
- /*
- * Check for an existing UNIT ATTENTION condition
- */
- if (core_scsi3_ua_check(cmd, cdb) < 0) {
- cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
- cmd->scsi_sense_reason = TCM_CHECK_CONDITION_UNIT_ATTENTION;
- return -EINVAL;
+ for (;;) {
+ struct se_cmd *cmd;
+
+ spin_lock(&dev->delayed_cmd_lock);
+ if (list_empty(&dev->delayed_cmd_list)) {
+ spin_unlock(&dev->delayed_cmd_lock);
+ break;
+ }
+
+ cmd = list_entry(dev->delayed_cmd_list.next,
+ struct se_cmd, se_delayed_node);
+ list_del(&cmd->se_delayed_node);
+ spin_unlock(&dev->delayed_cmd_lock);
+
+ __target_execute_cmd(cmd);
+
+ if (cmd->sam_task_attr == MSG_ORDERED_TAG)
+ break;
}
- /*
- * Check status of Asymmetric Logical Unit Assignment port
- */
- ret = su_dev->t10_alua.alua_state_check(cmd, cdb, &alua_ascq);
- if (ret != 0) {
- /*
- * Set SCSI additional sense code (ASC) to 'LUN Not Accessible';
- * The ALUA additional sense code qualifier (ASCQ) is determined
- * by the ALUA primary or secondary access state..
- */
- if (ret > 0) {
- pr_debug("[%s]: ALUA TG Port not available,"
- " SenseKey: NOT_READY, ASC/ASCQ: 0x04/0x%02x\n",
- cmd->se_tfo->get_fabric_name(), alua_ascq);
-
- transport_set_sense_codes(cmd, 0x04, alua_ascq);
- cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
- cmd->scsi_sense_reason = TCM_CHECK_CONDITION_NOT_READY;
- return -EINVAL;
- }
- goto out_invalid_cdb_field;
- }
- /*
- * Check status for SPC-3 Persistent Reservations
- */
- if (su_dev->t10_pr.pr_ops.t10_reservation_check(cmd, &pr_reg_type) != 0) {
- if (su_dev->t10_pr.pr_ops.t10_seq_non_holder(
- cmd, cdb, pr_reg_type) != 0) {
- cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
- cmd->se_cmd_flags |= SCF_SCSI_RESERVATION_CONFLICT;
- cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT;
- cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT;
- return -EBUSY;
- }
- /*
- * This means the CDB is allowed for the SCSI Initiator port
- * when said port is *NOT* holding the legacy SPC-2 or
- * SPC-3 Persistent Reservation.
- */
- }
-
- /*
- * If we operate in passthrough mode we skip most CDB emulation and
- * instead hand the commands down to the physical SCSI device.
- */
- passthrough =
- (dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV);
-
- switch (cdb[0]) {
- case READ_6:
- sectors = transport_get_sectors_6(cdb, cmd, §or_ret);
- if (sector_ret)
- goto out_unsupported_cdb;
- size = transport_get_size(sectors, cdb, cmd);
- cmd->t_task_lba = transport_lba_21(cdb);
- cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB;
- break;
- case READ_10:
- sectors = transport_get_sectors_10(cdb, cmd, §or_ret);
- if (sector_ret)
- goto out_unsupported_cdb;
- size = transport_get_size(sectors, cdb, cmd);
- cmd->t_task_lba = transport_lba_32(cdb);
- cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB;
- break;
- case READ_12:
- sectors = transport_get_sectors_12(cdb, cmd, §or_ret);
- if (sector_ret)
- goto out_unsupported_cdb;
- size = transport_get_size(sectors, cdb, cmd);
- cmd->t_task_lba = transport_lba_32(cdb);
- cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB;
- break;
- case READ_16:
- sectors = transport_get_sectors_16(cdb, cmd, §or_ret);
- if (sector_ret)
- goto out_unsupported_cdb;
- size = transport_get_size(sectors, cdb, cmd);
- cmd->t_task_lba = transport_lba_64(cdb);
- cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB;
- break;
- case WRITE_6:
- sectors = transport_get_sectors_6(cdb, cmd, §or_ret);
- if (sector_ret)
- goto out_unsupported_cdb;
- size = transport_get_size(sectors, cdb, cmd);
- cmd->t_task_lba = transport_lba_21(cdb);
- cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB;
- break;
- case WRITE_10:
- case WRITE_VERIFY:
- sectors = transport_get_sectors_10(cdb, cmd, §or_ret);
- if (sector_ret)
- goto out_unsupported_cdb;
- size = transport_get_size(sectors, cdb, cmd);
- cmd->t_task_lba = transport_lba_32(cdb);
- if (cdb[1] & 0x8)
- cmd->se_cmd_flags |= SCF_FUA;
- cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB;
- break;
- case WRITE_12:
- sectors = transport_get_sectors_12(cdb, cmd, §or_ret);
- if (sector_ret)
- goto out_unsupported_cdb;
- size = transport_get_size(sectors, cdb, cmd);
- cmd->t_task_lba = transport_lba_32(cdb);
- if (cdb[1] & 0x8)
- cmd->se_cmd_flags |= SCF_FUA;
- cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB;
- break;
- case WRITE_16:
- sectors = transport_get_sectors_16(cdb, cmd, §or_ret);
- if (sector_ret)
- goto out_unsupported_cdb;
- size = transport_get_size(sectors, cdb, cmd);
- cmd->t_task_lba = transport_lba_64(cdb);
- if (cdb[1] & 0x8)
- cmd->se_cmd_flags |= SCF_FUA;
- cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB;
- break;
- case XDWRITEREAD_10:
- if ((cmd->data_direction != DMA_TO_DEVICE) ||
- !(cmd->se_cmd_flags & SCF_BIDI))
- goto out_invalid_cdb_field;
- sectors = transport_get_sectors_10(cdb, cmd, §or_ret);
- if (sector_ret)
- goto out_unsupported_cdb;
- size = transport_get_size(sectors, cdb, cmd);
- cmd->t_task_lba = transport_lba_32(cdb);
- cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB;
-
- /*
- * Do now allow BIDI commands for passthrough mode.
- */
- if (passthrough)
- goto out_unsupported_cdb;
-
- /*
- * Setup BIDI XOR callback to be run after I/O completion.
- */
- cmd->transport_complete_callback = &transport_xor_callback;
- if (cdb[1] & 0x8)
- cmd->se_cmd_flags |= SCF_FUA;
- break;
- case VARIABLE_LENGTH_CMD:
- service_action = get_unaligned_be16(&cdb[8]);
- switch (service_action) {
- case XDWRITEREAD_32:
- sectors = transport_get_sectors_32(cdb, cmd, §or_ret);
- if (sector_ret)
- goto out_unsupported_cdb;
- size = transport_get_size(sectors, cdb, cmd);
- /*
- * Use WRITE_32 and READ_32 opcodes for the emulated
- * XDWRITE_READ_32 logic.
- */
- cmd->t_task_lba = transport_lba_64_ext(cdb);
- cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB;
-
- /*
- * Do now allow BIDI commands for passthrough mode.
- */
- if (passthrough)
- goto out_unsupported_cdb;
-
- /*
- * Setup BIDI XOR callback to be run during after I/O
- * completion.
- */
- cmd->transport_complete_callback = &transport_xor_callback;
- if (cdb[1] & 0x8)
- cmd->se_cmd_flags |= SCF_FUA;
- break;
- case WRITE_SAME_32:
- sectors = transport_get_sectors_32(cdb, cmd, §or_ret);
- if (sector_ret)
- goto out_unsupported_cdb;
-
- if (sectors)
- size = transport_get_size(1, cdb, cmd);
- else {
- pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not"
- " supported\n");
- goto out_invalid_cdb_field;
- }
-
- cmd->t_task_lba = get_unaligned_be64(&cdb[12]);
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
-
- if (target_check_write_same_discard(&cdb[10], dev) < 0)
- goto out_unsupported_cdb;
- if (!passthrough)
- cmd->execute_cmd = target_emulate_write_same;
- break;
- default:
- pr_err("VARIABLE_LENGTH_CMD service action"
- " 0x%04x not supported\n", service_action);
- goto out_unsupported_cdb;
- }
- break;
- case MAINTENANCE_IN:
- if (dev->transport->get_device_type(dev) != TYPE_ROM) {
- /* MAINTENANCE_IN from SCC-2 */
- /*
- * Check for emulated MI_REPORT_TARGET_PGS.
- */
- if ((cdb[1] & 0x1f) == MI_REPORT_TARGET_PGS &&
- su_dev->t10_alua.alua_type == SPC3_ALUA_EMULATED) {
- cmd->execute_cmd =
- target_emulate_report_target_port_groups;
- }
- size = (cdb[6] << 24) | (cdb[7] << 16) |
- (cdb[8] << 8) | cdb[9];
- } else {
- /* GPCMD_SEND_KEY from multi media commands */
- size = (cdb[8] << 8) + cdb[9];
- }
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case MODE_SELECT:
- size = cdb[4];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case MODE_SELECT_10:
- size = (cdb[7] << 8) + cdb[8];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case MODE_SENSE:
- size = cdb[4];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- if (!passthrough)
- cmd->execute_cmd = target_emulate_modesense;
- break;
- case MODE_SENSE_10:
- size = (cdb[7] << 8) + cdb[8];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- if (!passthrough)
- cmd->execute_cmd = target_emulate_modesense;
- break;
- case GPCMD_READ_BUFFER_CAPACITY:
- case GPCMD_SEND_OPC:
- case LOG_SELECT:
- case LOG_SENSE:
- size = (cdb[7] << 8) + cdb[8];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case READ_BLOCK_LIMITS:
- size = READ_BLOCK_LEN;
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case GPCMD_GET_CONFIGURATION:
- case GPCMD_READ_FORMAT_CAPACITIES:
- case GPCMD_READ_DISC_INFO:
- case GPCMD_READ_TRACK_RZONE_INFO:
- size = (cdb[7] << 8) + cdb[8];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case PERSISTENT_RESERVE_IN:
- if (su_dev->t10_pr.res_type == SPC3_PERSISTENT_RESERVATIONS)
- cmd->execute_cmd = target_scsi3_emulate_pr_in;
- size = (cdb[7] << 8) + cdb[8];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case PERSISTENT_RESERVE_OUT:
- if (su_dev->t10_pr.res_type == SPC3_PERSISTENT_RESERVATIONS)
- cmd->execute_cmd = target_scsi3_emulate_pr_out;
- size = (cdb[7] << 8) + cdb[8];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case GPCMD_MECHANISM_STATUS:
- case GPCMD_READ_DVD_STRUCTURE:
- size = (cdb[8] << 8) + cdb[9];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case READ_POSITION:
- size = READ_POSITION_LEN;
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case MAINTENANCE_OUT:
- if (dev->transport->get_device_type(dev) != TYPE_ROM) {
- /* MAINTENANCE_OUT from SCC-2
- *
- * Check for emulated MO_SET_TARGET_PGS.
- */
- if (cdb[1] == MO_SET_TARGET_PGS &&
- su_dev->t10_alua.alua_type == SPC3_ALUA_EMULATED) {
- cmd->execute_cmd =
- target_emulate_set_target_port_groups;
- }
-
- size = (cdb[6] << 24) | (cdb[7] << 16) |
- (cdb[8] << 8) | cdb[9];
- } else {
- /* GPCMD_REPORT_KEY from multi media commands */
- size = (cdb[8] << 8) + cdb[9];
- }
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case INQUIRY:
- size = (cdb[3] << 8) + cdb[4];
- /*
- * Do implict HEAD_OF_QUEUE processing for INQUIRY.
- * See spc4r17 section 5.3
- */
- if (cmd->se_dev->dev_task_attr_type == SAM_TASK_ATTR_EMULATED)
- cmd->sam_task_attr = MSG_HEAD_TAG;
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- if (!passthrough)
- cmd->execute_cmd = target_emulate_inquiry;
- break;
- case READ_BUFFER:
- size = (cdb[6] << 16) + (cdb[7] << 8) + cdb[8];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case READ_CAPACITY:
- size = READ_CAP_LEN;
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- if (!passthrough)
- cmd->execute_cmd = target_emulate_readcapacity;
- break;
- case READ_MEDIA_SERIAL_NUMBER:
- case SECURITY_PROTOCOL_IN:
- case SECURITY_PROTOCOL_OUT:
- size = (cdb[6] << 24) | (cdb[7] << 16) | (cdb[8] << 8) | cdb[9];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case SERVICE_ACTION_IN:
- switch (cmd->t_task_cdb[1] & 0x1f) {
- case SAI_READ_CAPACITY_16:
- if (!passthrough)
- cmd->execute_cmd =
- target_emulate_readcapacity_16;
- break;
- default:
- if (passthrough)
- break;
-
- pr_err("Unsupported SA: 0x%02x\n",
- cmd->t_task_cdb[1] & 0x1f);
- goto out_invalid_cdb_field;
- }
- /*FALLTHROUGH*/
- case ACCESS_CONTROL_IN:
- case ACCESS_CONTROL_OUT:
- case EXTENDED_COPY:
- case READ_ATTRIBUTE:
- case RECEIVE_COPY_RESULTS:
- case WRITE_ATTRIBUTE:
- size = (cdb[10] << 24) | (cdb[11] << 16) |
- (cdb[12] << 8) | cdb[13];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case RECEIVE_DIAGNOSTIC:
- case SEND_DIAGNOSTIC:
- size = (cdb[3] << 8) | cdb[4];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
-/* #warning FIXME: Figure out correct GPCMD_READ_CD blocksize. */
-#if 0
- case GPCMD_READ_CD:
- sectors = (cdb[6] << 16) + (cdb[7] << 8) + cdb[8];
- size = (2336 * sectors);
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
-#endif
- case READ_TOC:
- size = cdb[8];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case REQUEST_SENSE:
- size = cdb[4];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- if (!passthrough)
- cmd->execute_cmd = target_emulate_request_sense;
- break;
- case READ_ELEMENT_STATUS:
- size = 65536 * cdb[7] + 256 * cdb[8] + cdb[9];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case WRITE_BUFFER:
- size = (cdb[6] << 16) + (cdb[7] << 8) + cdb[8];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case RESERVE:
- case RESERVE_10:
- /*
- * The SPC-2 RESERVE does not contain a size in the SCSI CDB.
- * Assume the passthrough or $FABRIC_MOD will tell us about it.
- */
- if (cdb[0] == RESERVE_10)
- size = (cdb[7] << 8) | cdb[8];
- else
- size = cmd->data_length;
-
- /*
- * Setup the legacy emulated handler for SPC-2 and
- * >= SPC-3 compatible reservation handling (CRH=1)
- * Otherwise, we assume the underlying SCSI logic is
- * is running in SPC_PASSTHROUGH, and wants reservations
- * emulation disabled.
- */
- if (su_dev->t10_pr.res_type != SPC_PASSTHROUGH)
- cmd->execute_cmd = target_scsi2_reservation_reserve;
- cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
- break;
- case RELEASE:
- case RELEASE_10:
- /*
- * The SPC-2 RELEASE does not contain a size in the SCSI CDB.
- * Assume the passthrough or $FABRIC_MOD will tell us about it.
- */
- if (cdb[0] == RELEASE_10)
- size = (cdb[7] << 8) | cdb[8];
- else
- size = cmd->data_length;
-
- if (su_dev->t10_pr.res_type != SPC_PASSTHROUGH)
- cmd->execute_cmd = target_scsi2_reservation_release;
- cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
- break;
- case SYNCHRONIZE_CACHE:
- case SYNCHRONIZE_CACHE_16:
- /*
- * Extract LBA and range to be flushed for emulated SYNCHRONIZE_CACHE
- */
- if (cdb[0] == SYNCHRONIZE_CACHE) {
- sectors = transport_get_sectors_10(cdb, cmd, §or_ret);
- cmd->t_task_lba = transport_lba_32(cdb);
- } else {
- sectors = transport_get_sectors_16(cdb, cmd, §or_ret);
- cmd->t_task_lba = transport_lba_64(cdb);
- }
- if (sector_ret)
- goto out_unsupported_cdb;
-
- size = transport_get_size(sectors, cdb, cmd);
- cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
-
- if (passthrough)
- break;
-
- /*
- * Check to ensure that LBA + Range does not exceed past end of
- * device for IBLOCK and FILEIO ->do_sync_cache() backend calls
- */
- if ((cmd->t_task_lba != 0) || (sectors != 0)) {
- if (transport_cmd_get_valid_sectors(cmd) < 0)
- goto out_invalid_cdb_field;
- }
- cmd->execute_cmd = target_emulate_synchronize_cache;
- break;
- case UNMAP:
- size = get_unaligned_be16(&cdb[7]);
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- if (!passthrough)
- cmd->execute_cmd = target_emulate_unmap;
- break;
- case WRITE_SAME_16:
- sectors = transport_get_sectors_16(cdb, cmd, §or_ret);
- if (sector_ret)
- goto out_unsupported_cdb;
-
- if (sectors)
- size = transport_get_size(1, cdb, cmd);
- else {
- pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n");
- goto out_invalid_cdb_field;
- }
-
- cmd->t_task_lba = get_unaligned_be64(&cdb[2]);
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
-
- if (target_check_write_same_discard(&cdb[1], dev) < 0)
- goto out_unsupported_cdb;
- if (!passthrough)
- cmd->execute_cmd = target_emulate_write_same;
- break;
- case WRITE_SAME:
- sectors = transport_get_sectors_10(cdb, cmd, §or_ret);
- if (sector_ret)
- goto out_unsupported_cdb;
-
- if (sectors)
- size = transport_get_size(1, cdb, cmd);
- else {
- pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n");
- goto out_invalid_cdb_field;
- }
-
- cmd->t_task_lba = get_unaligned_be32(&cdb[2]);
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- /*
- * Follow sbcr26 with WRITE_SAME (10) and check for the existence
- * of byte 1 bit 3 UNMAP instead of original reserved field
- */
- if (target_check_write_same_discard(&cdb[1], dev) < 0)
- goto out_unsupported_cdb;
- if (!passthrough)
- cmd->execute_cmd = target_emulate_write_same;
- break;
- case ALLOW_MEDIUM_REMOVAL:
- case ERASE:
- case REZERO_UNIT:
- case SEEK_10:
- case SPACE:
- case START_STOP:
- case TEST_UNIT_READY:
- case VERIFY:
- case WRITE_FILEMARKS:
- cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
- if (!passthrough)
- cmd->execute_cmd = target_emulate_noop;
- break;
- case GPCMD_CLOSE_TRACK:
- case INITIALIZE_ELEMENT_STATUS:
- case GPCMD_LOAD_UNLOAD:
- case GPCMD_SET_SPEED:
- case MOVE_MEDIUM:
- cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
- break;
- case REPORT_LUNS:
- cmd->execute_cmd = target_report_luns;
- size = (cdb[6] << 24) | (cdb[7] << 16) | (cdb[8] << 8) | cdb[9];
- /*
- * Do implict HEAD_OF_QUEUE processing for REPORT_LUNS
- * See spc4r17 section 5.3
- */
- if (cmd->se_dev->dev_task_attr_type == SAM_TASK_ATTR_EMULATED)
- cmd->sam_task_attr = MSG_HEAD_TAG;
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case GET_EVENT_STATUS_NOTIFICATION:
- size = (cdb[7] << 8) | cdb[8];
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- case ATA_16:
- /* Only support ATA passthrough to pSCSI backends.. */
- if (!passthrough)
- goto out_unsupported_cdb;
-
- /* T_LENGTH */
- switch (cdb[2] & 0x3) {
- case 0x0:
- sectors = 0;
- break;
- case 0x1:
- sectors = (((cdb[1] & 0x1) ? cdb[3] : 0) << 8) | cdb[4];
- break;
- case 0x2:
- sectors = (((cdb[1] & 0x1) ? cdb[5] : 0) << 8) | cdb[6];
- break;
- case 0x3:
- pr_err("T_LENGTH=0x3 not supported for ATA_16\n");
- goto out_invalid_cdb_field;
- }
-
- /* BYTE_BLOCK */
- if (cdb[2] & 0x4) {
- /* BLOCK T_TYPE: 512 or sector */
- size = sectors * ((cdb[2] & 0x10) ?
- dev->se_sub_dev->se_dev_attrib.block_size : 512);
- } else {
- /* BYTE */
- size = sectors;
- }
- cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- break;
- default:
- pr_warn("TARGET_CORE[%s]: Unsupported SCSI Opcode"
- " 0x%02x, sending CHECK_CONDITION.\n",
- cmd->se_tfo->get_fabric_name(), cdb[0]);
- goto out_unsupported_cdb;
- }
-
- if (cmd->unknown_data_length)
- cmd->data_length = size;
-
- if (size != cmd->data_length) {
- pr_warn("TARGET_CORE[%s]: Expected Transfer Length:"
- " %u does not match SCSI CDB Length: %u for SAM Opcode:"
- " 0x%02x\n", cmd->se_tfo->get_fabric_name(),
- cmd->data_length, size, cdb[0]);
-
- cmd->cmd_spdtl = size;
-
- if (cmd->data_direction == DMA_TO_DEVICE) {
- pr_err("Rejecting underflow/overflow"
- " WRITE data\n");
- goto out_invalid_cdb_field;
- }
- /*
- * Reject READ_* or WRITE_* with overflow/underflow for
- * type SCF_SCSI_DATA_SG_IO_CDB.
- */
- if (!ret && (dev->se_sub_dev->se_dev_attrib.block_size != 512)) {
- pr_err("Failing OVERFLOW/UNDERFLOW for LBA op"
- " CDB on non 512-byte sector setup subsystem"
- " plugin: %s\n", dev->transport->name);
- /* Returns CHECK_CONDITION + INVALID_CDB_FIELD */
- goto out_invalid_cdb_field;
- }
-
- if (size > cmd->data_length) {
- cmd->se_cmd_flags |= SCF_OVERFLOW_BIT;
- cmd->residual_count = (size - cmd->data_length);
- } else {
- cmd->se_cmd_flags |= SCF_UNDERFLOW_BIT;
- cmd->residual_count = (cmd->data_length - size);
- }
- cmd->data_length = size;
- }
-
- if (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) {
- if (sectors > su_dev->se_dev_attrib.fabric_max_sectors) {
- printk_ratelimited(KERN_ERR "SCSI OP %02xh with too"
- " big sectors %u exceeds fabric_max_sectors:"
- " %u\n", cdb[0], sectors,
- su_dev->se_dev_attrib.fabric_max_sectors);
- goto out_invalid_cdb_field;
- }
- if (sectors > su_dev->se_dev_attrib.hw_max_sectors) {
- printk_ratelimited(KERN_ERR "SCSI OP %02xh with too"
- " big sectors %u exceeds backend hw_max_sectors:"
- " %u\n", cdb[0], sectors,
- su_dev->se_dev_attrib.hw_max_sectors);
- goto out_invalid_cdb_field;
- }
- }
-
- /* reject any command that we don't have a handler for */
- if (!(passthrough || cmd->execute_cmd ||
- (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)))
- goto out_unsupported_cdb;
-
- transport_set_supported_SAM_opcode(cmd);
- return ret;
-
-out_unsupported_cdb:
- cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
- cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE;
- return -EINVAL;
-out_invalid_cdb_field:
- cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
- cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD;
- return -EINVAL;
}
/*
@@ -3046,8 +1906,6 @@
static void transport_complete_task_attr(struct se_cmd *cmd)
{
struct se_device *dev = cmd->se_dev;
- struct se_cmd *cmd_p, *cmd_tmp;
- int new_active_tasks = 0;
if (cmd->sam_task_attr == MSG_SIMPLE_TAG) {
atomic_dec(&dev->simple_cmds);
@@ -3069,38 +1927,8 @@
pr_debug("Incremented dev_cur_ordered_id: %u for ORDERED:"
" %u\n", dev->dev_cur_ordered_id, cmd->se_ordered_id);
}
- /*
- * Process all commands up to the last received
- * ORDERED task attribute which requires another blocking
- * boundary
- */
- spin_lock(&dev->delayed_cmd_lock);
- list_for_each_entry_safe(cmd_p, cmd_tmp,
- &dev->delayed_cmd_list, se_delayed_node) {
- list_del(&cmd_p->se_delayed_node);
- spin_unlock(&dev->delayed_cmd_lock);
-
- pr_debug("Calling add_tasks() for"
- " cmd_p: 0x%02x Task Attr: 0x%02x"
- " Dormant -> Active, se_ordered_id: %u\n",
- cmd_p->t_task_cdb[0],
- cmd_p->sam_task_attr, cmd_p->se_ordered_id);
-
- target_add_to_execute_list(cmd_p);
- new_active_tasks++;
-
- spin_lock(&dev->delayed_cmd_lock);
- if (cmd_p->sam_task_attr == MSG_ORDERED_TAG)
- break;
- }
- spin_unlock(&dev->delayed_cmd_lock);
- /*
- * If new tasks have become active, wake up the transport thread
- * to do the processing of the Active tasks.
- */
- if (new_active_tasks != 0)
- wake_up_interruptible(&dev->dev_queue_obj.thread_wq);
+ target_restart_delayed_cmds(dev);
}
static void transport_complete_qf(struct se_cmd *cmd)
@@ -3359,31 +2187,27 @@
if (!sgl || !sgl_count)
return 0;
- if ((cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) ||
- (cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB)) {
- /*
- * Reject SCSI data overflow with map_mem_to_cmd() as incoming
- * scatterlists already have been set to follow what the fabric
- * passes for the original expected data transfer length.
- */
- if (cmd->se_cmd_flags & SCF_OVERFLOW_BIT) {
- pr_warn("Rejecting SCSI DATA overflow for fabric using"
- " SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC\n");
- cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
- cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD;
- return -EINVAL;
- }
-
- cmd->t_data_sg = sgl;
- cmd->t_data_nents = sgl_count;
-
- if (sgl_bidi && sgl_bidi_count) {
- cmd->t_bidi_data_sg = sgl_bidi;
- cmd->t_bidi_data_nents = sgl_bidi_count;
- }
- cmd->se_cmd_flags |= SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC;
+ /*
+ * Reject SCSI data overflow with map_mem_to_cmd() as incoming
+ * scatterlists already have been set to follow what the fabric
+ * passes for the original expected data transfer length.
+ */
+ if (cmd->se_cmd_flags & SCF_OVERFLOW_BIT) {
+ pr_warn("Rejecting SCSI DATA overflow for fabric using"
+ " SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC\n");
+ cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
+ cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD;
+ return -EINVAL;
}
+ cmd->t_data_sg = sgl;
+ cmd->t_data_nents = sgl_count;
+
+ if (sgl_bidi && sgl_bidi_count) {
+ cmd->t_bidi_data_sg = sgl_bidi;
+ cmd->t_bidi_data_nents = sgl_bidi_count;
+ }
+ cmd->se_cmd_flags |= SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC;
return 0;
}
EXPORT_SYMBOL(transport_generic_map_mem_to_cmd);
@@ -3455,7 +2279,7 @@
cmd->t_data_nents = nents;
sg_init_table(cmd->t_data_sg, nents);
- zero_flag = cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB ? 0 : __GFP_ZERO;
+ zero_flag = cmd->se_cmd_flags & SCF_SCSI_DATA_CDB ? 0 : __GFP_ZERO;
while (length) {
u32 page_len = min_t(u32, length, PAGE_SIZE);
@@ -3486,7 +2310,6 @@
*/
int transport_generic_new_cmd(struct se_cmd *cmd)
{
- struct se_device *dev = cmd->se_dev;
int ret = 0;
/*
@@ -3502,8 +2325,7 @@
}
/* Workaround for handling zero-length control CDBs */
- if ((cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB) &&
- !cmd->data_length) {
+ if (!(cmd->se_cmd_flags & SCF_SCSI_DATA_CDB) && !cmd->data_length) {
spin_lock_irq(&cmd->t_state_lock);
cmd->t_state = TRANSPORT_COMPLETE;
cmd->transport_state |= CMD_T_ACTIVE;
@@ -3521,52 +2343,45 @@
return 0;
}
- if (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) {
- struct se_dev_attrib *attr = &dev->se_sub_dev->se_dev_attrib;
-
- if (transport_cmd_get_valid_sectors(cmd) < 0)
- return -EINVAL;
-
- BUG_ON(cmd->data_length % attr->block_size);
- BUG_ON(DIV_ROUND_UP(cmd->data_length, attr->block_size) >
- attr->hw_max_sectors);
- }
-
atomic_inc(&cmd->t_fe_count);
/*
- * For WRITEs, let the fabric know its buffer is ready.
- *
- * The command will be added to the execution queue after its write
- * data has arrived.
+ * If this command is not a write we can execute it right here,
+ * for write buffers we need to notify the fabric driver first
+ * and let it call back once the write buffers are ready.
*/
- if (cmd->data_direction == DMA_TO_DEVICE) {
- target_add_to_state_list(cmd);
- return transport_generic_write_pending(cmd);
+ target_add_to_state_list(cmd);
+ if (cmd->data_direction != DMA_TO_DEVICE) {
+ target_execute_cmd(cmd);
+ return 0;
}
- /*
- * Everything else but a WRITE, add the command to the execution queue.
- */
- transport_execute_tasks(cmd);
- return 0;
+
+ spin_lock_irq(&cmd->t_state_lock);
+ cmd->t_state = TRANSPORT_WRITE_PENDING;
+ spin_unlock_irq(&cmd->t_state_lock);
+
+ transport_cmd_check_stop(cmd, false);
+
+ ret = cmd->se_tfo->write_pending(cmd);
+ if (ret == -EAGAIN || ret == -ENOMEM)
+ goto queue_full;
+
+ if (ret < 0)
+ return ret;
+ return 1;
out_fail:
cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
return -EINVAL;
+queue_full:
+ pr_debug("Handling write_pending QUEUE__FULL: se_cmd: %p\n", cmd);
+ cmd->t_state = TRANSPORT_COMPLETE_QF_WP;
+ transport_handle_queue_full(cmd, cmd->se_dev);
+ return 0;
}
EXPORT_SYMBOL(transport_generic_new_cmd);
-/* transport_generic_process_write():
- *
- *
- */
-void transport_generic_process_write(struct se_cmd *cmd)
-{
- transport_execute_tasks(cmd);
-}
-EXPORT_SYMBOL(transport_generic_process_write);
-
static void transport_write_pending_qf(struct se_cmd *cmd)
{
int ret;
@@ -3579,43 +2394,6 @@
}
}
-static int transport_generic_write_pending(struct se_cmd *cmd)
-{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&cmd->t_state_lock, flags);
- cmd->t_state = TRANSPORT_WRITE_PENDING;
- spin_unlock_irqrestore(&cmd->t_state_lock, flags);
-
- /*
- * Clear the se_cmd for WRITE_PENDING status in order to set
- * CMD_T_ACTIVE so that transport_generic_handle_data can be called
- * from HW target mode interrupt code. This is safe to be called
- * with transport_off=1 before the cmd->se_tfo->write_pending
- * because the se_cmd->se_lun pointer is not being cleared.
- */
- transport_cmd_check_stop(cmd, 1, 0);
-
- /*
- * Call the fabric write_pending function here to let the
- * frontend know that WRITE buffers are ready.
- */
- ret = cmd->se_tfo->write_pending(cmd);
- if (ret == -EAGAIN || ret == -ENOMEM)
- goto queue_full;
- else if (ret < 0)
- return ret;
-
- return 1;
-
-queue_full:
- pr_debug("Handling write_pending QUEUE__FULL: se_cmd: %p\n", cmd);
- cmd->t_state = TRANSPORT_COMPLETE_QF_WP;
- transport_handle_queue_full(cmd, cmd->se_dev);
- return 0;
-}
-
void transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks)
{
if (!(cmd->se_cmd_flags & SCF_SE_LUN_CMD)) {
@@ -3642,10 +2420,11 @@
* @se_cmd: command descriptor to add
* @ack_kref: Signal that fabric will perform an ack target_put_sess_cmd()
*/
-void target_get_sess_cmd(struct se_session *se_sess, struct se_cmd *se_cmd,
- bool ack_kref)
+static int target_get_sess_cmd(struct se_session *se_sess, struct se_cmd *se_cmd,
+ bool ack_kref)
{
unsigned long flags;
+ int ret = 0;
kref_init(&se_cmd->cmd_kref);
/*
@@ -3659,11 +2438,17 @@
}
spin_lock_irqsave(&se_sess->sess_cmd_lock, flags);
+ if (se_sess->sess_tearing_down) {
+ ret = -ESHUTDOWN;
+ goto out;
+ }
list_add_tail(&se_cmd->se_cmd_list, &se_sess->sess_cmd_list);
se_cmd->check_release = 1;
+
+out:
spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
+ return ret;
}
-EXPORT_SYMBOL(target_get_sess_cmd);
static void target_release_cmd_kref(struct kref *kref)
{
@@ -3698,28 +2483,27 @@
}
EXPORT_SYMBOL(target_put_sess_cmd);
-/* target_splice_sess_cmd_list - Split active cmds into sess_wait_list
- * @se_sess: session to split
+/* target_sess_cmd_list_set_waiting - Flag all commands in
+ * sess_cmd_list to complete cmd_wait_comp. Set
+ * sess_tearing_down so no more commands are queued.
+ * @se_sess: session to flag
*/
-void target_splice_sess_cmd_list(struct se_session *se_sess)
+void target_sess_cmd_list_set_waiting(struct se_session *se_sess)
{
struct se_cmd *se_cmd;
unsigned long flags;
- WARN_ON(!list_empty(&se_sess->sess_wait_list));
- INIT_LIST_HEAD(&se_sess->sess_wait_list);
-
spin_lock_irqsave(&se_sess->sess_cmd_lock, flags);
+
+ WARN_ON(se_sess->sess_tearing_down);
se_sess->sess_tearing_down = 1;
- list_splice_init(&se_sess->sess_cmd_list, &se_sess->sess_wait_list);
-
- list_for_each_entry(se_cmd, &se_sess->sess_wait_list, se_cmd_list)
+ list_for_each_entry(se_cmd, &se_sess->sess_cmd_list, se_cmd_list)
se_cmd->cmd_wait_set = 1;
spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
}
-EXPORT_SYMBOL(target_splice_sess_cmd_list);
+EXPORT_SYMBOL(target_sess_cmd_list_set_waiting);
/* target_wait_for_sess_cmds - Wait for outstanding descriptors
* @se_sess: session to wait for active I/O
@@ -3733,7 +2517,7 @@
bool rc = false;
list_for_each_entry_safe(se_cmd, tmp_cmd,
- &se_sess->sess_wait_list, se_cmd_list) {
+ &se_sess->sess_cmd_list, se_cmd_list) {
list_del(&se_cmd->se_cmd_list);
pr_debug("Waiting for se_cmd: %p t_state: %d, fabric state:"
@@ -3785,26 +2569,20 @@
pr_debug("ConfigFS ITT[0x%08x] - CMD_T_STOP, skipping\n",
cmd->se_tfo->get_task_tag(cmd));
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- transport_cmd_check_stop(cmd, 1, 0);
+ transport_cmd_check_stop(cmd, false);
return -EPERM;
}
cmd->transport_state |= CMD_T_LUN_FE_STOP;
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- wake_up_interruptible(&cmd->se_dev->dev_queue_obj.thread_wq);
-
// XXX: audit task_flags checks.
spin_lock_irqsave(&cmd->t_state_lock, flags);
if ((cmd->transport_state & CMD_T_BUSY) &&
(cmd->transport_state & CMD_T_SENT)) {
if (!target_stop_cmd(cmd, &flags))
ret++;
- spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- } else {
- spin_unlock_irqrestore(&cmd->t_state_lock,
- flags);
- target_remove_from_execute_list(cmd);
}
+ spin_unlock_irqrestore(&cmd->t_state_lock, flags);
pr_debug("ConfigFS: cmd: %p stop tasks ret:"
" %d\n", cmd, ret);
@@ -3815,7 +2593,6 @@
pr_debug("ConfigFS: ITT[0x%08x] - stopped cmd....\n",
cmd->se_tfo->get_task_tag(cmd));
}
- transport_remove_cmd_from_queue(cmd);
return 0;
}
@@ -3834,11 +2611,6 @@
struct se_cmd, se_lun_node);
list_del_init(&cmd->se_lun_node);
- /*
- * This will notify iscsi_target_transport.c:
- * transport_cmd_check_stop() that a LUN shutdown is in
- * progress for the iscsi_cmd_t.
- */
spin_lock(&cmd->t_state_lock);
pr_debug("SE_LUN[%d] - Setting cmd->transport"
"_lun_stop for ITT: 0x%08x\n",
@@ -3905,7 +2677,7 @@
spin_unlock_irqrestore(&cmd->t_state_lock,
cmd_flags);
- transport_cmd_check_stop(cmd, 1, 0);
+ transport_cmd_check_stop(cmd, false);
complete(&cmd->transport_lun_fe_stop_comp);
spin_lock_irqsave(&lun->lun_cmd_lock, lun_flags);
continue;
@@ -3961,10 +2733,7 @@
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
return false;
}
- /*
- * Only perform a possible wait_for_tasks if SCF_SUPPORTED_SAM_OPCODE
- * has been set in transport_set_supported_SAM_opcode().
- */
+
if (!(cmd->se_cmd_flags & SCF_SUPPORTED_SAM_OPCODE) &&
!(cmd->se_cmd_flags & SCF_SCSI_TMR_CDB)) {
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
@@ -4022,8 +2791,6 @@
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- wake_up_interruptible(&cmd->se_dev->dev_queue_obj.thread_wq);
-
wait_for_completion(&cmd->t_transport_stop_comp);
spin_lock_irqsave(&cmd->t_state_lock, flags);
@@ -4206,6 +2973,15 @@
/* WRITE PROTECTED */
buffer[offset+SPC_ASC_KEY_OFFSET] = 0x27;
break;
+ case TCM_ADDRESS_OUT_OF_RANGE:
+ /* CURRENT ERROR */
+ buffer[offset] = 0x70;
+ buffer[offset+SPC_ADD_SENSE_LEN_OFFSET] = 10;
+ /* ILLEGAL REQUEST */
+ buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST;
+ /* LOGICAL BLOCK ADDRESS OUT OF RANGE */
+ buffer[offset+SPC_ASC_KEY_OFFSET] = 0x21;
+ break;
case TCM_CHECK_CONDITION_UNIT_ATTENTION:
/* CURRENT ERROR */
buffer[offset] = 0x70;
@@ -4306,8 +3082,9 @@
cmd->se_tfo->queue_status(cmd);
}
-static int transport_generic_do_tmr(struct se_cmd *cmd)
+static void target_tmr_work(struct work_struct *work)
{
+ struct se_cmd *cmd = container_of(work, struct se_cmd, work);
struct se_device *dev = cmd->se_dev;
struct se_tmr_req *tmr = cmd->se_tmr_req;
int ret;
@@ -4343,80 +3120,13 @@
cmd->se_tfo->queue_tm_rsp(cmd);
transport_cmd_check_stop_to_fabric(cmd);
- return 0;
}
-/* transport_processing_thread():
- *
- *
- */
-static int transport_processing_thread(void *param)
+int transport_generic_handle_tmr(
+ struct se_cmd *cmd)
{
- int ret;
- struct se_cmd *cmd;
- struct se_device *dev = param;
-
- while (!kthread_should_stop()) {
- ret = wait_event_interruptible(dev->dev_queue_obj.thread_wq,
- atomic_read(&dev->dev_queue_obj.queue_cnt) ||
- kthread_should_stop());
- if (ret < 0)
- goto out;
-
-get_cmd:
- cmd = transport_get_cmd_from_queue(&dev->dev_queue_obj);
- if (!cmd)
- continue;
-
- switch (cmd->t_state) {
- case TRANSPORT_NEW_CMD:
- BUG();
- break;
- case TRANSPORT_NEW_CMD_MAP:
- if (!cmd->se_tfo->new_cmd_map) {
- pr_err("cmd->se_tfo->new_cmd_map is"
- " NULL for TRANSPORT_NEW_CMD_MAP\n");
- BUG();
- }
- ret = cmd->se_tfo->new_cmd_map(cmd);
- if (ret < 0) {
- transport_generic_request_failure(cmd);
- break;
- }
- ret = transport_generic_new_cmd(cmd);
- if (ret < 0) {
- transport_generic_request_failure(cmd);
- break;
- }
- break;
- case TRANSPORT_PROCESS_WRITE:
- transport_generic_process_write(cmd);
- break;
- case TRANSPORT_PROCESS_TMR:
- transport_generic_do_tmr(cmd);
- break;
- case TRANSPORT_COMPLETE_QF_WP:
- transport_write_pending_qf(cmd);
- break;
- case TRANSPORT_COMPLETE_QF_OK:
- transport_complete_qf(cmd);
- break;
- default:
- pr_err("Unknown t_state: %d for ITT: 0x%08x "
- "i_state: %d on SE LUN: %u\n",
- cmd->t_state,
- cmd->se_tfo->get_task_tag(cmd),
- cmd->se_tfo->get_cmd_state(cmd),
- cmd->se_lun->unpacked_lun);
- BUG();
- }
-
- goto get_cmd;
- }
-
-out:
- WARN_ON(!list_empty(&dev->state_list));
- WARN_ON(!list_empty(&dev->dev_queue_obj.qobj_list));
- dev->process_thread = NULL;
+ INIT_WORK(&cmd->work, target_tmr_work);
+ queue_work(cmd->se_dev->tmr_wq, &cmd->work);
return 0;
}
+EXPORT_SYMBOL(transport_generic_handle_tmr);
diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c
index f03fb97..b9cb500 100644
--- a/drivers/target/tcm_fc/tfc_cmd.c
+++ b/drivers/target/tcm_fc/tfc_cmd.c
@@ -215,7 +215,7 @@
*/
if ((ep->xid <= lport->lro_xid) &&
(fh->fh_r_ctl == FC_RCTL_DD_DATA_DESC)) {
- if ((se_cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) &&
+ if ((se_cmd->se_cmd_flags & SCF_SCSI_DATA_CDB) &&
lport->tt.ddp_target(lport, ep->xid,
se_cmd->t_data_sg,
se_cmd->t_data_nents))
@@ -230,6 +230,8 @@
{
struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+ if (cmd->aborted)
+ return ~0;
return fc_seq_exch(cmd->seq)->rxid;
}
@@ -541,9 +543,11 @@
* Use a single se_cmd->cmd_kref as we expect to release se_cmd
* directly from ft_check_stop_free callback in response path.
*/
- target_submit_cmd(&cmd->se_cmd, cmd->sess->se_sess, fcp->fc_cdb,
- &cmd->ft_sense_buffer[0], scsilun_to_int(&fcp->fc_lun),
- ntohl(fcp->fc_dl), task_attr, data_dir, 0);
+ if (target_submit_cmd(&cmd->se_cmd, cmd->sess->se_sess, fcp->fc_cdb,
+ &cmd->ft_sense_buffer[0], scsilun_to_int(&fcp->fc_lun),
+ ntohl(fcp->fc_dl), task_attr, data_dir, 0))
+ goto err;
+
pr_debug("r_ctl %x alloc target_submit_cmd\n", fh->fh_r_ctl);
return;
diff --git a/drivers/target/tcm_fc/tfc_io.c b/drivers/target/tcm_fc/tfc_io.c
index 071a505..ad36ede1 100644
--- a/drivers/target/tcm_fc/tfc_io.c
+++ b/drivers/target/tcm_fc/tfc_io.c
@@ -183,6 +183,13 @@
return ft_queue_status(se_cmd);
}
+static void ft_execute_work(struct work_struct *work)
+{
+ struct ft_cmd *cmd = container_of(work, struct ft_cmd, work);
+
+ target_execute_cmd(&cmd->se_cmd);
+}
+
/*
* Receive write data frame.
*/
@@ -307,8 +314,10 @@
cmd->write_data_len += tlen;
}
last_frame:
- if (cmd->write_data_len == se_cmd->data_length)
- transport_generic_handle_data(se_cmd);
+ if (cmd->write_data_len == se_cmd->data_length) {
+ INIT_WORK(&cmd->work, ft_execute_work);
+ queue_work(cmd->sess->tport->tpg->workqueue, &cmd->work);
+ }
drop:
fc_frame_free(fp);
}
diff --git a/drivers/target/tcm_fc/tfc_sess.c b/drivers/target/tcm_fc/tfc_sess.c
index cb99da9..87901fa 100644
--- a/drivers/target/tcm_fc/tfc_sess.c
+++ b/drivers/target/tcm_fc/tfc_sess.c
@@ -58,7 +58,8 @@
struct ft_tport *tport;
int i;
- tport = rcu_dereference(lport->prov[FC_TYPE_FCP]);
+ tport = rcu_dereference_protected(lport->prov[FC_TYPE_FCP],
+ lockdep_is_held(&ft_lport_lock));
if (tport && tport->tpg)
return tport;
diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
index ced26c8..0d2ea0c 100644
--- a/drivers/tty/hvc/hvc_opal.c
+++ b/drivers/tty/hvc/hvc_opal.c
@@ -401,7 +401,7 @@
}
#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL_RAW
-void __init udbg_init_debug_opal(void)
+void __init udbg_init_debug_opal_raw(void)
{
u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO;
hvc_opal_privs[index] = &hvc_opal_boot_priv;
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index d3d91da..944eaeb 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -214,24 +214,24 @@
/* already configured */
if (info->intf != NULL)
return 0;
-
+ /*
+ * If the toolstack (or the hypervisor) hasn't set these values, the
+ * default value is 0. Even though mfn = 0 and evtchn = 0 are
+ * theoretically correct values, in practice they never are and they
+ * mean that a legacy toolstack hasn't initialized the pv console correctly.
+ */
r = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v);
- if (r < 0) {
- kfree(info);
- return -ENODEV;
- }
+ if (r < 0 || v == 0)
+ goto err;
info->evtchn = v;
- hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v);
- if (r < 0) {
- kfree(info);
- return -ENODEV;
- }
+ v = 0;
+ r = hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v);
+ if (r < 0 || v == 0)
+ goto err;
mfn = v;
info->intf = ioremap(mfn << PAGE_SHIFT, PAGE_SIZE);
- if (info->intf == NULL) {
- kfree(info);
- return -ENODEV;
- }
+ if (info->intf == NULL)
+ goto err;
info->vtermno = HVC_COOKIE;
spin_lock(&xencons_lock);
@@ -239,6 +239,9 @@
spin_unlock(&xencons_lock);
return 0;
+err:
+ kfree(info);
+ return -ENODEV;
}
static int xen_pv_console_init(void)
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 47d061b..6e1958a 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -3113,7 +3113,7 @@
/**
* serial8250_register_8250_port - register a serial port
- * @port: serial port template
+ * @up: serial port template
*
* Configure the serial port specified by the request. If the
* port exists and is in use, it is hung up and unregistered
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 4ad721f..c17923e 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -133,6 +133,10 @@
struct uart_amba_port {
struct uart_port port;
struct clk *clk;
+ /* Two optional pin states - default & sleep */
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_default;
+ struct pinctrl_state *pins_sleep;
const struct vendor_data *vendor;
unsigned int dmacr; /* dma control reg */
unsigned int im; /* interrupt mask */
@@ -1312,6 +1316,14 @@
unsigned int cr;
int retval;
+ /* Optionaly enable pins to be muxed in and configured */
+ if (!IS_ERR(uap->pins_default)) {
+ retval = pinctrl_select_state(uap->pinctrl, uap->pins_default);
+ if (retval)
+ dev_err(port->dev,
+ "could not set default pins\n");
+ }
+
retval = clk_prepare(uap->clk);
if (retval)
goto out;
@@ -1420,6 +1432,7 @@
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
+ int retval;
/*
* disable all interrupts
@@ -1462,6 +1475,14 @@
*/
clk_disable(uap->clk);
clk_unprepare(uap->clk);
+ /* Optionally let pins go into sleep states */
+ if (!IS_ERR(uap->pins_sleep)) {
+ retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep);
+ if (retval)
+ dev_err(port->dev,
+ "could not set pins to sleep state\n");
+ }
+
if (uap->port.dev->platform_data) {
struct amba_pl011_data *plat;
@@ -1792,6 +1813,14 @@
if (!uap)
return -ENODEV;
+ /* Allow pins to be muxed in and configured */
+ if (!IS_ERR(uap->pins_default)) {
+ ret = pinctrl_select_state(uap->pinctrl, uap->pins_default);
+ if (ret)
+ dev_err(uap->port.dev,
+ "could not set default pins\n");
+ }
+
ret = clk_prepare(uap->clk);
if (ret)
return ret;
@@ -1844,7 +1873,6 @@
{
struct uart_amba_port *uap;
struct vendor_data *vendor = id->data;
- struct pinctrl *pinctrl;
void __iomem *base;
int i, ret;
@@ -1869,11 +1897,20 @@
goto free;
}
- pinctrl = devm_pinctrl_get_select_default(&dev->dev);
- if (IS_ERR(pinctrl)) {
- ret = PTR_ERR(pinctrl);
+ uap->pinctrl = devm_pinctrl_get(&dev->dev);
+ if (IS_ERR(uap->pinctrl)) {
+ ret = PTR_ERR(uap->pinctrl);
goto unmap;
}
+ uap->pins_default = pinctrl_lookup_state(uap->pinctrl,
+ PINCTRL_STATE_DEFAULT);
+ if (IS_ERR(uap->pins_default))
+ dev_err(&dev->dev, "could not get default pinstate\n");
+
+ uap->pins_sleep = pinctrl_lookup_state(uap->pinctrl,
+ PINCTRL_STATE_SLEEP);
+ if (IS_ERR(uap->pins_sleep))
+ dev_dbg(&dev->dev, "could not get sleep pinstate\n");
uap->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(uap->clk)) {
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 4ef7473..d5c689d6 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -169,7 +169,6 @@
#define SERIAL_IMX_MAJOR 207
#define MINOR_START 16
#define DEV_NAME "ttymxc"
-#define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS
/*
* This determines how often we check the modem status signals
@@ -741,10 +740,7 @@
/* do not use RTS IRQ on IrDA */
if (!USE_IRDA(sport)) {
- retval = request_irq(sport->rtsirq, imx_rtsint,
- (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
- IRQF_TRIGGER_FALLING |
- IRQF_TRIGGER_RISING,
+ retval = request_irq(sport->rtsirq, imx_rtsint, 0,
DRIVER_NAME, sport);
if (retval)
goto error_out3;
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index ec56d83..2e341b8 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -33,6 +33,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/of_device.h>
#include <asm/cacheflush.h>
@@ -675,6 +676,30 @@
#endif
};
+/*
+ * This function returns 1 if pdev isn't a device instatiated by dt, 0 if it
+ * could successfully get all information from dt or a negative errno.
+ */
+static int serial_mxs_probe_dt(struct mxs_auart_port *s,
+ struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ if (!np)
+ /* no device tree device */
+ return 1;
+
+ ret = of_alias_get_id(np, "serial");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to get alias id: %d\n", ret);
+ return ret;
+ }
+ s->port.line = ret;
+
+ return 0;
+}
+
static int __devinit mxs_auart_probe(struct platform_device *pdev)
{
struct mxs_auart_port *s;
@@ -689,6 +714,12 @@
goto out;
}
+ ret = serial_mxs_probe_dt(s, pdev);
+ if (ret > 0)
+ s->port.line = pdev->id < 0 ? 0 : pdev->id;
+ else if (ret < 0)
+ goto out_free;
+
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl)) {
ret = PTR_ERR(pinctrl);
@@ -711,7 +742,6 @@
s->port.membase = ioremap(r->start, resource_size(r));
s->port.ops = &mxs_auart_ops;
s->port.iotype = UPIO_MEM;
- s->port.line = pdev->id < 0 ? 0 : pdev->id;
s->port.fifosize = 16;
s->port.uartclk = clk_get_rate(s->clk);
s->port.type = PORT_IMX;
@@ -728,7 +758,7 @@
platform_set_drvdata(pdev, s);
- auart_port[pdev->id] = s;
+ auart_port[s->port.line] = s;
mxs_auart_reset(&s->port);
@@ -769,12 +799,19 @@
return 0;
}
+static struct of_device_id mxs_auart_dt_ids[] = {
+ { .compatible = "fsl,imx23-auart", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids);
+
static struct platform_driver mxs_auart_driver = {
.probe = mxs_auart_probe,
.remove = __devexit_p(mxs_auart_remove),
.driver = {
.name = "mxs-auart",
.owner = THIS_MODULE,
+ .of_match_table = mxs_auart_dt_ids,
},
};
@@ -807,3 +844,4 @@
module_exit(mxs_auart_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Freescale MXS application uart driver");
+MODULE_ALIAS("platform:mxs-auart");
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index 34bd345..6ae2a58 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -466,7 +466,7 @@
spin_unlock_irqrestore(&up->port.lock, flags);
}
-#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL)
+#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
/*
* Wait for transmitter & holding register to empty
*/
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 4604153..1bd9163 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2179,6 +2179,16 @@
return 0;
}
+static void sci_cleanup_single(struct sci_port *port)
+{
+ sci_free_gpios(port);
+
+ clk_put(port->iclk);
+ clk_put(port->fclk);
+
+ pm_runtime_disable(port->port.dev);
+}
+
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
static void serial_console_putchar(struct uart_port *port, int ch)
{
@@ -2360,14 +2370,10 @@
cpufreq_unregister_notifier(&port->freq_transition,
CPUFREQ_TRANSITION_NOTIFIER);
- sci_free_gpios(port);
-
uart_remove_one_port(&sci_uart_driver, &port->port);
- clk_put(port->iclk);
- clk_put(port->fclk);
+ sci_cleanup_single(port);
- pm_runtime_disable(&dev->dev);
return 0;
}
@@ -2385,14 +2391,20 @@
index+1, SCI_NPORTS);
dev_notice(&dev->dev, "Consider bumping "
"CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
- return 0;
+ return -EINVAL;
}
ret = sci_init_single(dev, sciport, index, p);
if (ret)
return ret;
- return uart_add_one_port(&sci_uart_driver, &sciport->port);
+ ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
+ if (ret) {
+ sci_cleanup_single(sciport);
+ return ret;
+ }
+
+ return 0;
}
static int __devinit sci_probe(struct platform_device *dev)
@@ -2413,24 +2425,22 @@
ret = sci_probe_single(dev, dev->id, p, sp);
if (ret)
- goto err_unreg;
+ return ret;
sp->freq_transition.notifier_call = sci_notifier;
ret = cpufreq_register_notifier(&sp->freq_transition,
CPUFREQ_TRANSITION_NOTIFIER);
- if (unlikely(ret < 0))
- goto err_unreg;
+ if (unlikely(ret < 0)) {
+ sci_cleanup_single(sp);
+ return ret;
+ }
#ifdef CONFIG_SH_STANDARD_BIOS
sh_bios_gdb_detach();
#endif
return 0;
-
-err_unreg:
- sci_remove(dev);
- return ret;
}
static int sci_suspend(struct device *dev)
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index c691eea..f5ed3d7 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -46,7 +46,7 @@
obj-$(CONFIG_USB_SERIAL) += serial/
obj-$(CONFIG_USB) += misc/
-obj-$(CONFIG_USB) += phy/
+obj-$(CONFIG_USB_COMMON) += phy/
obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
obj-$(CONFIG_USB_ATM) += atm/
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index f2a120e..36a2a0b 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -567,6 +567,14 @@
usb_autopm_put_interface(acm->control);
+ /*
+ * Unthrottle device in case the TTY was closed while throttled.
+ */
+ spin_lock_irq(&acm->read_lock);
+ acm->throttled = 0;
+ acm->throttle_req = 0;
+ spin_unlock_irq(&acm->read_lock);
+
if (acm_submit_read_urbs(acm, GFP_KERNEL))
goto error_submit_read_urbs;
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index ea8b304..ee46927 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -55,6 +55,15 @@
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 9, /* NOTE: CDC ECM control interface! */
},
+ {
+ /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR |
+ USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = HUAWEI_VENDOR_ID,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 57, /* NOTE: CDC ECM control interface! */
+ },
{ }
};
@@ -491,6 +500,8 @@
goto retry;
}
if (!desc->reslength) { /* zero length read */
+ dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
+ clear_bit(WDM_READ, &desc->flags);
spin_unlock_irq(&desc->iuspin);
goto retry;
}
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 57ed9e4..622b4a4 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -493,15 +493,6 @@
pci_save_state(pci_dev);
- /*
- * Some systems crash if an EHCI controller is in D3 during
- * a sleep transition. We have to leave such controllers in D0.
- */
- if (hcd->broken_pci_sleep) {
- dev_dbg(dev, "Staying in PCI D0\n");
- return retval;
- }
-
/* If the root hub is dead rather than suspended, disallow remote
* wakeup. usb_hc_died() should ensure that both hosts are marked as
* dying, so we only need to check the primary roothub.
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 04fb834..8fb4849 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2324,12 +2324,16 @@
static int hub_port_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay, bool warm);
-/* Is a USB 3.0 port in the Inactive state? */
-static bool hub_port_inactive(struct usb_hub *hub, u16 portstatus)
+/* Is a USB 3.0 port in the Inactive or Complinance Mode state?
+ * Port worm reset is required to recover
+ */
+static bool hub_port_warm_reset_required(struct usb_hub *hub, u16 portstatus)
{
return hub_is_superspeed(hub->hdev) &&
- (portstatus & USB_PORT_STAT_LINK_STATE) ==
- USB_SS_PORT_LS_SS_INACTIVE;
+ (((portstatus & USB_PORT_STAT_LINK_STATE) ==
+ USB_SS_PORT_LS_SS_INACTIVE) ||
+ ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+ USB_SS_PORT_LS_COMP_MOD)) ;
}
static int hub_port_wait_reset(struct usb_hub *hub, int port1,
@@ -2365,7 +2369,7 @@
*
* See https://bugzilla.kernel.org/show_bug.cgi?id=41752
*/
- if (hub_port_inactive(hub, portstatus)) {
+ if (hub_port_warm_reset_required(hub, portstatus)) {
int ret;
if ((portchange & USB_PORT_STAT_C_CONNECTION))
@@ -3379,7 +3383,7 @@
return 0;
udev->lpm_disable_count++;
- if ((udev->u1_params.timeout == 0 && udev->u1_params.timeout == 0))
+ if ((udev->u1_params.timeout == 0 && udev->u2_params.timeout == 0))
return 0;
/* If LPM is enabled, attempt to disable it. */
@@ -4408,9 +4412,7 @@
/* Warm reset a USB3 protocol port if it's in
* SS.Inactive state.
*/
- if (hub_is_superspeed(hub->hdev) &&
- (portstatus & USB_PORT_STAT_LINK_STATE)
- == USB_SS_PORT_LS_SS_INACTIVE) {
+ if (hub_port_warm_reset_required(hub, portstatus)) {
dev_dbg(hub_dev, "warm reset port %d\n", i);
hub_port_reset(hub, i, NULL,
HUB_BH_RESET_TIME, true);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b548cf1..bdd1c67 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1838,7 +1838,6 @@
intfc = cp->intf_cache[i];
intf->altsetting = intfc->altsetting;
intf->num_altsetting = intfc->num_altsetting;
- intf->intf_assoc = find_iad(dev, cp, i);
kref_get(&intfc->ref);
alt = usb_altnum_to_altsetting(intf, 0);
@@ -1851,6 +1850,8 @@
if (!alt)
alt = &intf->altsetting[0];
+ intf->intf_assoc =
+ find_iad(dev, cp, alt->desc.bInterfaceNumber);
intf->cur_altsetting = alt;
usb_enable_interface(dev, intf, true);
intf->dev.parent = &dev->dev;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 3df1a19..ec70df7 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1091,7 +1091,7 @@
if (r == req) {
/* wait until it is processed */
dwc3_stop_active_transfer(dwc, dep->number);
- goto out0;
+ goto out1;
}
dev_err(dwc->dev, "request %p was not queued to %s\n",
request, ep->name);
@@ -1099,6 +1099,7 @@
goto out0;
}
+out1:
/* giveback the request */
dwc3_gadget_giveback(dep, req, -ECONNRESET);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index bddc8fd..271ca16 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -185,7 +185,7 @@
config USB_OMAP
tristate "OMAP USB Device Controller"
- depends on ARCH_OMAP
+ depends on ARCH_OMAP1
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
select USB_OTG_UTILS if ARCH_OMAP
help
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index e23bf79..9a9bced 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -599,12 +599,6 @@
spin_lock_irqsave(&ep->udc->lock, flags);
- if (ep->ep.desc) {
- spin_unlock_irqrestore(&ep->udc->lock, flags);
- DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
- return -EBUSY;
- }
-
ep->ep.desc = desc;
ep->ep.maxpacket = maxpacket;
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 51881f3..b09452d 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -1596,7 +1596,7 @@
ep = container_of(_ep, struct qe_ep, ep);
/* catch various bogus parameters */
- if (!_ep || !desc || ep->ep.desc || _ep->name == ep_name[0] ||
+ if (!_ep || !desc || _ep->name == ep_name[0] ||
(desc->bDescriptorType != USB_DT_ENDPOINT))
return -EINVAL;
diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h
index 4c07ca9..7026919 100644
--- a/drivers/usb/gadget/fsl_qe_udc.h
+++ b/drivers/usb/gadget/fsl_qe_udc.h
@@ -153,10 +153,10 @@
#define USB_BUSMODE_DTB 0x02
/* Endpoint basic handle */
-#define ep_index(EP) ((EP)->desc->bEndpointAddress & 0xF)
+#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress & 0xF)
#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
#define ep_is_in(EP) ((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
- USB_DIR_IN) : ((EP)->desc->bEndpointAddress \
+ USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
& USB_DIR_IN) == USB_DIR_IN)
/* ep0 transfer state */
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 2831685..bc6f9bb 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -567,7 +567,7 @@
ep = container_of(_ep, struct fsl_ep, ep);
/* catch various bogus parameters */
- if (!_ep || !desc || ep->ep.desc
+ if (!_ep || !desc
|| (desc->bDescriptorType != USB_DT_ENDPOINT))
return -EINVAL;
@@ -2575,7 +2575,7 @@
/* for ep0: the desc defined here;
* for other eps, gadget layer called ep_enable with defined desc
*/
- udc_controller->eps[0].desc = &fsl_ep0_desc;
+ udc_controller->eps[0].ep.desc = &fsl_ep0_desc;
udc_controller->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD;
/* setup the udc->eps[] for non-control endpoints and link
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index 5cd7b7e..f61a967 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -568,10 +568,10 @@
/*
* ### internal used help routines.
*/
-#define ep_index(EP) ((EP)->desc->bEndpointAddress&0xF)
+#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress&0xF)
#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
#define ep_is_in(EP) ( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
- USB_DIR_IN ):((EP)->desc->bEndpointAddress \
+ USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
& USB_DIR_IN)==USB_DIR_IN)
#define get_ep_by_pipe(udc, pipe) ((pipe == 1)? &udc->eps[0]: \
&udc->eps[pipe])
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index b241e6c..3d28fb9 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -102,7 +102,7 @@
unsigned long flags;
ep = container_of(_ep, struct goku_ep, ep);
- if (!_ep || !desc || ep->ep.desc
+ if (!_ep || !desc
|| desc->bDescriptorType != USB_DT_ENDPOINT)
return -EINVAL;
dev = ep->dev;
diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index 262acfd..2ab0388 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -61,6 +61,7 @@
#include <mach/irqs.h>
#include <mach/board.h>
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+#include <linux/debugfs.h>
#include <linux/seq_file.h>
#endif
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index dbcd132..117a4bb 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -464,7 +464,7 @@
ep = container_of(_ep, struct mv_ep, ep);
udc = ep->udc;
- if (!_ep || !desc || ep->ep.desc
+ if (!_ep || !desc
|| desc->bDescriptorType != USB_DT_ENDPOINT)
return -EINVAL;
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 7ba3246..89cbd2b 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -44,7 +44,8 @@
#include <asm/mach-types.h>
#include <plat/dma.h>
-#include <plat/usb.h>
+
+#include <mach/usb.h>
#include "omap_udc.h"
@@ -153,7 +154,7 @@
u16 maxp;
/* catch various bogus parameters */
- if (!_ep || !desc || ep->ep.desc
+ if (!_ep || !desc
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| ep->bEndpointAddress != desc->bEndpointAddress
|| ep->maxpacket < usb_endpoint_maxp(desc)) {
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index d7c8cb3..f7ff9e8e 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -218,7 +218,7 @@
struct pxa25x_udc *dev;
ep = container_of (_ep, struct pxa25x_ep, ep);
- if (!_ep || !desc || ep->ep.desc || _ep->name == ep0name
+ if (!_ep || !desc || _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| ep->bEndpointAddress != desc->bEndpointAddress
|| ep->fifo_size < usb_endpoint_maxp (desc)) {
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index 36c6836..236b271 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -760,7 +760,7 @@
u32 ecr = 0;
hsep = our_ep(_ep);
- if (!_ep || !desc || hsep->ep.desc || _ep->name == ep0name
+ if (!_ep || !desc || _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| hsep->bEndpointAddress != desc->bEndpointAddress
|| ep_maxpacket(hsep) < usb_endpoint_maxp(desc))
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 3de71d3..f2e51f5 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1062,7 +1062,7 @@
ep = to_s3c2410_ep(_ep);
- if (!_ep || !desc || ep->ep.desc
+ if (!_ep || !desc
|| _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT)
return -EINVAL;
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index c46439c..5444866 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -294,7 +294,7 @@
pr_err("%s(%d)\n", __func__, __LINE__);
wait_for_completion(&cmd->write_complete);
- transport_generic_process_write(se_cmd);
+ target_execute_cmd(se_cmd);
cleanup:
return ret;
}
@@ -725,7 +725,7 @@
}
wait_for_completion(&cmd->write_complete);
- transport_generic_process_write(se_cmd);
+ target_execute_cmd(se_cmd);
cleanup:
return ret;
}
@@ -1065,16 +1065,20 @@
tv_nexus->tvn_se_sess->se_tpg->se_tpg_tfo,
tv_nexus->tvn_se_sess, cmd->data_len, DMA_NONE,
cmd->prio_attr, cmd->sense_iu.sense);
-
- transport_send_check_condition_and_sense(se_cmd,
- TCM_UNSUPPORTED_SCSI_OPCODE, 1);
- usbg_cleanup_cmd(cmd);
- return;
+ goto out;
}
- target_submit_cmd(se_cmd, tv_nexus->tvn_se_sess,
+ if (target_submit_cmd(se_cmd, tv_nexus->tvn_se_sess,
cmd->cmd_buf, cmd->sense_iu.sense, cmd->unpacked_lun,
- 0, cmd->prio_attr, dir, TARGET_SCF_UNKNOWN_SIZE);
+ 0, cmd->prio_attr, dir, TARGET_SCF_UNKNOWN_SIZE) < 0)
+ goto out;
+
+ return;
+
+out:
+ transport_send_check_condition_and_sense(se_cmd,
+ TCM_UNSUPPORTED_SCSI_OPCODE, 1);
+ usbg_cleanup_cmd(cmd);
}
static int usbg_submit_command(struct f_uas *fu,
@@ -1177,16 +1181,20 @@
tv_nexus->tvn_se_sess->se_tpg->se_tpg_tfo,
tv_nexus->tvn_se_sess, cmd->data_len, DMA_NONE,
cmd->prio_attr, cmd->sense_iu.sense);
-
- transport_send_check_condition_and_sense(se_cmd,
- TCM_UNSUPPORTED_SCSI_OPCODE, 1);
- usbg_cleanup_cmd(cmd);
- return;
+ goto out;
}
- target_submit_cmd(se_cmd, tv_nexus->tvn_se_sess,
+ if (target_submit_cmd(se_cmd, tv_nexus->tvn_se_sess,
cmd->cmd_buf, cmd->sense_iu.sense, cmd->unpacked_lun,
- cmd->data_len, cmd->prio_attr, dir, 0);
+ cmd->data_len, cmd->prio_attr, dir, 0) < 0)
+ goto out;
+
+ return;
+
+out:
+ transport_send_check_condition_and_sense(se_cmd,
+ TCM_UNSUPPORTED_SCSI_OPCODE, 1);
+ usbg_cleanup_cmd(cmd);
}
static int bot_submit_command(struct f_uas *fu,
@@ -1400,19 +1408,6 @@
return 1;
}
-static int usbg_new_cmd(struct se_cmd *se_cmd)
-{
- struct usbg_cmd *cmd = container_of(se_cmd, struct usbg_cmd,
- se_cmd);
- int ret;
-
- ret = target_setup_cmd_from_cdb(se_cmd, cmd->cmd_buf);
- if (ret)
- return ret;
-
- return transport_generic_map_mem_to_cmd(se_cmd, NULL, 0, NULL, 0);
-}
-
static void usbg_cmd_release(struct kref *ref)
{
struct usbg_cmd *cmd = container_of(ref, struct usbg_cmd,
@@ -1902,7 +1897,6 @@
.tpg_alloc_fabric_acl = usbg_alloc_fabric_acl,
.tpg_release_fabric_acl = usbg_release_fabric_acl,
.tpg_get_inst_index = usbg_tpg_get_inst_index,
- .new_cmd_map = usbg_new_cmd,
.release_cmd = usbg_release_cmd,
.shutdown_session = usbg_shutdown_session,
.close_session = usbg_close_session,
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 83e58df..dcfaaa9 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -308,7 +308,7 @@
config USB_OHCI_HCD_OMAP1
bool "OHCI support for OMAP1/2 chips"
- depends on USB_OHCI_HCD && (ARCH_OMAP1 || ARCH_OMAP2)
+ depends on USB_OHCI_HCD && ARCH_OMAP1
default y
---help---
Enables support for the OHCI controller on OMAP1/2 chips.
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index b100f5f..800be38 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -671,7 +671,9 @@
hw = ehci->async->hw;
hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
+#if defined(CONFIG_PPC_PS3)
hw->hw_info1 |= cpu_to_hc32(ehci, (1 << 7)); /* I = 1 */
+#endif
hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
hw->hw_qtd_next = EHCI_LIST_END(ehci);
ehci->async->qh_state = QH_STATE_LINKED;
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index a44294d..c304354 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -43,6 +43,7 @@
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/gpio.h>
+#include <linux/clk.h>
/* EHCI Register Set */
#define EHCI_INSNREG04 (0xA0)
@@ -55,6 +56,15 @@
#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
+/* Errata i693 */
+static struct clk *utmi_p1_fck;
+static struct clk *utmi_p2_fck;
+static struct clk *xclk60mhsp1_ck;
+static struct clk *xclk60mhsp2_ck;
+static struct clk *usbhost_p1_fck;
+static struct clk *usbhost_p2_fck;
+static struct clk *init_60m_fclk;
+
/*-------------------------------------------------------------------------*/
static const struct hc_driver ehci_omap_hc_driver;
@@ -70,6 +80,41 @@
return __raw_readl(base + reg);
}
+/* Erratum i693 workaround sequence */
+static void omap_ehci_erratum_i693(struct ehci_hcd *ehci)
+{
+ int ret = 0;
+
+ /* Switch to the internal 60 MHz clock */
+ ret = clk_set_parent(utmi_p1_fck, init_60m_fclk);
+ if (ret != 0)
+ ehci_err(ehci, "init_60m_fclk set parent"
+ "failed error:%d\n", ret);
+
+ ret = clk_set_parent(utmi_p2_fck, init_60m_fclk);
+ if (ret != 0)
+ ehci_err(ehci, "init_60m_fclk set parent"
+ "failed error:%d\n", ret);
+
+ clk_enable(usbhost_p1_fck);
+ clk_enable(usbhost_p2_fck);
+
+ /* Wait 1ms and switch back to the external clock */
+ mdelay(1);
+ ret = clk_set_parent(utmi_p1_fck, xclk60mhsp1_ck);
+ if (ret != 0)
+ ehci_err(ehci, "xclk60mhsp1_ck set parent"
+ "failed error:%d\n", ret);
+
+ ret = clk_set_parent(utmi_p2_fck, xclk60mhsp2_ck);
+ if (ret != 0)
+ ehci_err(ehci, "xclk60mhsp2_ck set parent"
+ "failed error:%d\n", ret);
+
+ clk_disable(usbhost_p1_fck);
+ clk_disable(usbhost_p2_fck);
+}
+
static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port)
{
struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev);
@@ -100,6 +145,50 @@
}
}
+static int omap_ehci_hub_control(
+ struct usb_hcd *hcd,
+ u16 typeReq,
+ u16 wValue,
+ u16 wIndex,
+ char *buf,
+ u16 wLength
+)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ u32 __iomem *status_reg = &ehci->regs->port_status[
+ (wIndex & 0xff) - 1];
+ u32 temp;
+ unsigned long flags;
+ int retval = 0;
+
+ spin_lock_irqsave(&ehci->lock, flags);
+
+ if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
+ temp = ehci_readl(ehci, status_reg);
+ if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
+ retval = -EPIPE;
+ goto done;
+ }
+
+ temp &= ~PORT_WKCONN_E;
+ temp |= PORT_WKDISC_E | PORT_WKOC_E;
+ ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+
+ omap_ehci_erratum_i693(ehci);
+
+ set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
+ goto done;
+ }
+
+ spin_unlock_irqrestore(&ehci->lock, flags);
+
+ /* Handle the hub control events here */
+ return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+done:
+ spin_unlock_irqrestore(&ehci->lock, flags);
+ return retval;
+}
+
static void disable_put_regulator(
struct ehci_hcd_omap_platform_data *pdata)
{
@@ -192,14 +281,13 @@
}
}
+ /* Hold PHYs in reset while initializing EHCI controller */
if (pdata->phy_reset) {
if (gpio_is_valid(pdata->reset_gpio_port[0]))
- gpio_request_one(pdata->reset_gpio_port[0],
- GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
+ gpio_set_value_cansleep(pdata->reset_gpio_port[0], 0);
if (gpio_is_valid(pdata->reset_gpio_port[1]))
- gpio_request_one(pdata->reset_gpio_port[1],
- GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
+ gpio_set_value_cansleep(pdata->reset_gpio_port[1], 0);
/* Hold the PHY in RESET for enough time till DIR is high */
udelay(10);
@@ -241,6 +329,11 @@
omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params);
ehci_reset(omap_ehci);
+ ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (ret) {
+ dev_err(dev, "failed to add hcd with err %d\n", ret);
+ goto err_add_hcd;
+ }
if (pdata->phy_reset) {
/* Hold the PHY in RESET for enough time till
@@ -255,17 +348,79 @@
gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1);
}
- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (ret) {
- dev_err(dev, "failed to add hcd with err %d\n", ret);
- goto err_add_hcd;
- }
-
/* root ports should always stay powered */
ehci_port_power(omap_ehci, 1);
+ /* get clocks */
+ utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
+ if (IS_ERR(utmi_p1_fck)) {
+ ret = PTR_ERR(utmi_p1_fck);
+ dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
+ goto err_add_hcd;
+ }
+
+ xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
+ if (IS_ERR(xclk60mhsp1_ck)) {
+ ret = PTR_ERR(xclk60mhsp1_ck);
+ dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
+ goto err_utmi_p1_fck;
+ }
+
+ utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
+ if (IS_ERR(utmi_p2_fck)) {
+ ret = PTR_ERR(utmi_p2_fck);
+ dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
+ goto err_xclk60mhsp1_ck;
+ }
+
+ xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
+ if (IS_ERR(xclk60mhsp2_ck)) {
+ ret = PTR_ERR(xclk60mhsp2_ck);
+ dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
+ goto err_utmi_p2_fck;
+ }
+
+ usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
+ if (IS_ERR(usbhost_p1_fck)) {
+ ret = PTR_ERR(usbhost_p1_fck);
+ dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
+ goto err_xclk60mhsp2_ck;
+ }
+
+ usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
+ if (IS_ERR(usbhost_p2_fck)) {
+ ret = PTR_ERR(usbhost_p2_fck);
+ dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
+ goto err_usbhost_p1_fck;
+ }
+
+ init_60m_fclk = clk_get(dev, "init_60m_fclk");
+ if (IS_ERR(init_60m_fclk)) {
+ ret = PTR_ERR(init_60m_fclk);
+ dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
+ goto err_usbhost_p2_fck;
+ }
+
return 0;
+err_usbhost_p2_fck:
+ clk_put(usbhost_p2_fck);
+
+err_usbhost_p1_fck:
+ clk_put(usbhost_p1_fck);
+
+err_xclk60mhsp2_ck:
+ clk_put(xclk60mhsp2_ck);
+
+err_utmi_p2_fck:
+ clk_put(utmi_p2_fck);
+
+err_xclk60mhsp1_ck:
+ clk_put(xclk60mhsp1_ck);
+
+err_utmi_p1_fck:
+ clk_put(utmi_p1_fck);
+
err_add_hcd:
disable_put_regulator(pdata);
pm_runtime_put_sync(dev);
@@ -294,6 +449,15 @@
disable_put_regulator(dev->platform_data);
iounmap(hcd->regs);
usb_put_hcd(hcd);
+
+ clk_put(utmi_p1_fck);
+ clk_put(utmi_p2_fck);
+ clk_put(xclk60mhsp1_ck);
+ clk_put(xclk60mhsp2_ck);
+ clk_put(usbhost_p1_fck);
+ clk_put(usbhost_p2_fck);
+ clk_put(init_60m_fclk);
+
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
@@ -364,7 +528,7 @@
* root hub support
*/
.hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
+ .hub_control = omap_ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index bc94d7b..1234817 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -144,14 +144,6 @@
hcd->has_tt = 1;
tdi_reset(ehci);
}
- if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
- /* EHCI #1 or #2 on 6 Series/C200 Series chipset */
- if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
- ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
- hcd->broken_pci_sleep = 1;
- device_set_wakeup_capable(&pdev->dev, false);
- }
- }
break;
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
index ca819cd..e7cb392 100644
--- a/drivers/usb/host/ehci-sh.c
+++ b/drivers/usb/host/ehci-sh.c
@@ -126,8 +126,7 @@
goto fail_create_hcd;
}
- if (pdev->dev.platform_data != NULL)
- pdata = pdev->dev.platform_data;
+ pdata = pdev->dev.platform_data;
/* initialize hcd */
hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev,
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 6854823..ab8a3bf 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -46,8 +46,8 @@
{
struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
- clk_enable(tegra->emc_clk);
- clk_enable(tegra->clk);
+ clk_prepare_enable(tegra->emc_clk);
+ clk_prepare_enable(tegra->clk);
tegra_usb_phy_power_on(tegra->phy);
tegra->host_resumed = 1;
}
@@ -58,8 +58,8 @@
tegra->host_resumed = 0;
tegra_usb_phy_power_off(tegra->phy);
- clk_disable(tegra->clk);
- clk_disable(tegra->emc_clk);
+ clk_disable_unprepare(tegra->clk);
+ clk_disable_unprepare(tegra->emc_clk);
}
static int tegra_ehci_internal_port_reset(
@@ -671,7 +671,7 @@
goto fail_clk;
}
- err = clk_enable(tegra->clk);
+ err = clk_prepare_enable(tegra->clk);
if (err)
goto fail_clken;
@@ -682,7 +682,7 @@
goto fail_emc_clk;
}
- clk_enable(tegra->emc_clk);
+ clk_prepare_enable(tegra->emc_clk);
clk_set_rate(tegra->emc_clk, 400000000);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -782,10 +782,10 @@
fail_phy:
iounmap(hcd->regs);
fail_io:
- clk_disable(tegra->emc_clk);
+ clk_disable_unprepare(tegra->emc_clk);
clk_put(tegra->emc_clk);
fail_emc_clk:
- clk_disable(tegra->clk);
+ clk_disable_unprepare(tegra->clk);
fail_clken:
clk_put(tegra->clk);
fail_clk:
@@ -820,10 +820,10 @@
tegra_usb_phy_close(tegra->phy);
iounmap(hcd->regs);
- clk_disable(tegra->clk);
+ clk_disable_unprepare(tegra->clk);
clk_put(tegra->clk);
- clk_disable(tegra->emc_clk);
+ clk_disable_unprepare(tegra->emc_clk);
clk_put(tegra->emc_clk);
kfree(tegra);
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index 9c2cc46..e9713d5 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -270,14 +270,12 @@
*
* Properly shutdown the hcd, call driver's shutdown routine.
*/
-static int ehci_hcd_xilinx_of_shutdown(struct platform_device *op)
+static void ehci_hcd_xilinx_of_shutdown(struct platform_device *op)
{
struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
-
- return 0;
}
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 836772d..2f3619e 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -317,7 +317,7 @@
}
/* Carry out the final steps of resuming the controller device */
-static void ohci_finish_controller_resume(struct usb_hcd *hcd)
+static void __maybe_unused ohci_finish_controller_resume(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int port;
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 9ce35d0..b02c344 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -20,14 +20,15 @@
#include <linux/clk.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <plat/mux.h>
-#include <mach/irqs.h>
#include <plat/fpga.h>
-#include <plat/usb.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/usb.h>
/* OMAP-1510 OHCI has its own MMU for DMA */
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 2732ef6..7b01094 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -462,6 +462,42 @@
}
}
+/* Updates Link Status for super Speed port */
+static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
+{
+ u32 pls = status_reg & PORT_PLS_MASK;
+
+ /* resume state is a xHCI internal state.
+ * Do not report it to usb core.
+ */
+ if (pls == XDEV_RESUME)
+ return;
+
+ /* When the CAS bit is set then warm reset
+ * should be performed on port
+ */
+ if (status_reg & PORT_CAS) {
+ /* The CAS bit can be set while the port is
+ * in any link state.
+ * Only roothubs have CAS bit, so we
+ * pretend to be in compliance mode
+ * unless we're already in compliance
+ * or the inactive state.
+ */
+ if (pls != USB_SS_PORT_LS_COMP_MOD &&
+ pls != USB_SS_PORT_LS_SS_INACTIVE) {
+ pls = USB_SS_PORT_LS_COMP_MOD;
+ }
+ /* Return also connection bit -
+ * hub state machine resets port
+ * when this bit is set.
+ */
+ pls |= USB_PORT_STAT_CONNECTION;
+ }
+ /* update status field */
+ *status |= pls;
+}
+
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
@@ -606,13 +642,9 @@
else
status |= USB_PORT_STAT_POWER;
}
- /* Port Link State */
+ /* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
- /* resume state is a xHCI internal state.
- * Do not report it to usb core.
- */
- if ((temp & PORT_PLS_MASK) != XDEV_RESUME)
- status |= (temp & PORT_PLS_MASK);
+ xhci_hub_report_link_state(&status, temp);
}
if (bus_state->port_c_suspend & (1 << wIndex))
status |= 1 << USB_PORT_FEAT_C_SUSPEND;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index ec4338e..77689bd 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -793,10 +793,9 @@
struct xhci_virt_device *virt_dev,
int slot_id)
{
- struct list_head *tt;
struct list_head *tt_list_head;
- struct list_head *tt_next;
- struct xhci_tt_bw_info *tt_info;
+ struct xhci_tt_bw_info *tt_info, *next;
+ bool slot_found = false;
/* If the device never made it past the Set Address stage,
* it may not have the real_port set correctly.
@@ -808,34 +807,16 @@
}
tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts);
- if (list_empty(tt_list_head))
- return;
-
- list_for_each(tt, tt_list_head) {
- tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
- if (tt_info->slot_id == slot_id)
+ list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
+ /* Multi-TT hubs will have more than one entry */
+ if (tt_info->slot_id == slot_id) {
+ slot_found = true;
+ list_del(&tt_info->tt_list);
+ kfree(tt_info);
+ } else if (slot_found) {
break;
+ }
}
- /* Cautionary measure in case the hub was disconnected before we
- * stored the TT information.
- */
- if (tt_info->slot_id != slot_id)
- return;
-
- tt_next = tt->next;
- tt_info = list_entry(tt, struct xhci_tt_bw_info,
- tt_list);
- /* Multi-TT hubs will have more than one entry */
- do {
- list_del(tt);
- kfree(tt_info);
- tt = tt_next;
- if (list_empty(tt_list_head))
- break;
- tt_next = tt->next;
- tt_info = list_entry(tt, struct xhci_tt_bw_info,
- tt_list);
- } while (tt_info->slot_id == slot_id);
}
int xhci_alloc_tt_info(struct xhci_hcd *xhci,
@@ -1791,17 +1772,9 @@
{
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
struct dev_info *dev_info, *next;
- struct list_head *tt_list_head;
- struct list_head *tt;
- struct list_head *endpoints;
- struct list_head *ep, *q;
- struct xhci_tt_bw_info *tt_info;
- struct xhci_interval_bw_table *bwt;
- struct xhci_virt_ep *virt_ep;
-
unsigned long flags;
int size;
- int i;
+ int i, j, num_ports;
/* Free the Event Ring Segment Table and the actual Event Ring */
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
@@ -1860,21 +1833,22 @@
}
spin_unlock_irqrestore(&xhci->lock, flags);
- bwt = &xhci->rh_bw->bw_table;
- for (i = 0; i < XHCI_MAX_INTERVAL; i++) {
- endpoints = &bwt->interval_bw[i].endpoints;
- list_for_each_safe(ep, q, endpoints) {
- virt_ep = list_entry(ep, struct xhci_virt_ep, bw_endpoint_list);
- list_del(&virt_ep->bw_endpoint_list);
- kfree(virt_ep);
+ num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+ for (i = 0; i < num_ports; i++) {
+ struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
+ for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
+ struct list_head *ep = &bwt->interval_bw[j].endpoints;
+ while (!list_empty(ep))
+ list_del_init(ep->next);
}
}
- tt_list_head = &xhci->rh_bw->tts;
- list_for_each_safe(tt, q, tt_list_head) {
- tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
- list_del(tt);
- kfree(tt_info);
+ for (i = 0; i < num_ports; i++) {
+ struct xhci_tt_bw_info *tt, *n;
+ list_for_each_entry_safe(tt, n, &xhci->rh_bw[i].tts, tt_list) {
+ list_del(&tt->tt_list);
+ kfree(tt);
+ }
}
xhci->num_usb2_ports = 0;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 23b4aef..8275645 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -885,6 +885,17 @@
num_trbs_free_temp = ep_ring->num_trbs_free;
dequeue_temp = ep_ring->dequeue;
+ /* If we get two back-to-back stalls, and the first stalled transfer
+ * ends just before a link TRB, the dequeue pointer will be left on
+ * the link TRB by the code in the while loop. So we have to update
+ * the dequeue pointer one segment further, or we'll jump off
+ * the segment into la-la-land.
+ */
+ if (last_trb(xhci, ep_ring, ep_ring->deq_seg, ep_ring->dequeue)) {
+ ep_ring->deq_seg = ep_ring->deq_seg->next;
+ ep_ring->dequeue = ep_ring->deq_seg->trbs;
+ }
+
while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) {
/* We have more usable TRBs */
ep_ring->num_trbs_free++;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index afdc73e..a979cd0 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -795,8 +795,8 @@
command = xhci_readl(xhci, &xhci->op_regs->command);
command |= CMD_CSS;
xhci_writel(xhci, command, &xhci->op_regs->command);
- if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10*100)) {
- xhci_warn(xhci, "WARN: xHC CMD_CSS timeout\n");
+ if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) {
+ xhci_warn(xhci, "WARN: xHC save state timeout\n");
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
}
@@ -848,8 +848,8 @@
command |= CMD_CRS;
xhci_writel(xhci, command, &xhci->op_regs->command);
if (handshake(xhci, &xhci->op_regs->status,
- STS_RESTORE, 0, 10*100)) {
- xhci_dbg(xhci, "WARN: xHC CMD_CSS timeout\n");
+ STS_RESTORE, 0, 10 * 1000)) {
+ xhci_warn(xhci, "WARN: xHC restore state timeout\n");
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
}
@@ -3906,7 +3906,7 @@
default:
dev_warn(&udev->dev, "%s: Can't get timeout for non-U1 or U2 state.\n",
__func__);
- return -EINVAL;
+ return USB3_LPM_DISABLED;
}
if (sel <= max_sel_pel && pel <= max_sel_pel)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index de3d6e3..55c0785 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -341,7 +341,11 @@
#define PORT_PLC (1 << 22)
/* port configure error change - port failed to configure its link partner */
#define PORT_CEC (1 << 23)
-/* bit 24 reserved */
+/* Cold Attach Status - xHC can set this bit to report device attached during
+ * Sx state. Warm port reset should be perfomed to clear this bit and move port
+ * to connected state.
+ */
+#define PORT_CAS (1 << 24)
/* wake on connect (enable) */
#define PORT_WKCONN_E (1 << 25)
/* wake on disconnect (enable) */
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 768b4b5..9d63ba4 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -34,6 +34,7 @@
#include <linux/dma-mapping.h>
#include <mach/cputype.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h
index 046c844..371baa0 100644
--- a/drivers/usb/musb/davinci.h
+++ b/drivers/usb/musb/davinci.h
@@ -15,7 +15,7 @@
*/
/* Integrated highspeed/otg PHY */
-#define USBPHY_CTL_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x34)
+#define USBPHY_CTL_PADDR 0x01c40034
#define USBPHY_DATAPOL BIT(11) /* (dm355) switch D+/D- */
#define USBPHY_PHYCLKGD BIT(8)
#define USBPHY_SESNDEN BIT(7) /* v(sess_end) comparator */
@@ -27,7 +27,7 @@
#define USBPHY_OTGPDWN BIT(1)
#define USBPHY_PHYPDWN BIT(0)
-#define DM355_DEEPSLEEP_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x48)
+#define DM355_DEEPSLEEP_PADDR 0x01c40048
#define DRVVBUS_FORCE BIT(2)
#define DRVVBUS_OVERRIDE BIT(1)
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index f42c29b..95918da 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1232,6 +1232,7 @@
}
musb_ep->desc = NULL;
+ musb_ep->end_point.desc = NULL;
/* abort all pending DMA and requests */
nuke(musb_ep, -ESHUTDOWN);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index ef8d744..e090c79 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -375,11 +375,21 @@
*/
if (list_empty(&qh->hep->urb_list)) {
struct list_head *head;
+ struct dma_controller *dma = musb->dma_controller;
- if (is_in)
+ if (is_in) {
ep->rx_reinit = 1;
- else
+ if (ep->rx_channel) {
+ dma->channel_release(ep->rx_channel);
+ ep->rx_channel = NULL;
+ }
+ } else {
ep->tx_reinit = 1;
+ if (ep->tx_channel) {
+ dma->channel_release(ep->tx_channel);
+ ep->tx_channel = NULL;
+ }
+ }
/* Clobber old pointers to this qh */
musb_ep_set_qh(ep, is_in, NULL);
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 70cf5d7..e0558df 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -36,9 +36,9 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/usb.h>
#include <plat/mux.h>
+#include <mach/usb.h>
#ifndef DEBUG
#undef VERBOSE
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index d2a9a8e..0eabb04 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -305,9 +305,8 @@
regulator_enable(twl->usb3v3);
twl->asleep = 1;
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
- 0x10);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
status = USB_EVENT_ID;
otg->default_a = true;
twl->phy.state = OTG_STATE_A_IDLE;
@@ -316,12 +315,10 @@
atomic_notifier_call_chain(&twl->phy.notifier, status,
otg->gadget);
} else {
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR,
- 0x10);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
- 0x1);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
}
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status);
+ twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
return IRQ_HANDLED;
}
@@ -343,7 +340,7 @@
{
struct twl6030_usb *twl = phy_to_twl(x);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 3cfabcb..e7cf84f 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -2,11 +2,11 @@
# Physical Layer USB driver configuration
#
comment "USB Physical Layer drivers"
- depends on USB
+ depends on USB || USB_GADGET
config USB_ISP1301
tristate "NXP ISP1301 USB transceiver support"
- depends on USB
+ depends on USB || USB_GADGET
depends on I2C
help
Say Y here to add support for the NXP ISP1301 USB transceiver driver.
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 1b19262..1e71079 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -82,6 +82,7 @@
{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
+ { USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */
{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
@@ -92,6 +93,7 @@
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+ { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
@@ -133,7 +135,13 @@
{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
+ { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
+ { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
+ { USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */
+ { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
+ { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
+ { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
@@ -145,7 +153,11 @@
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+ { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
+ { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
+ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
+ { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
{ } /* Terminating Entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8c084ea..bc912e5 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -737,6 +737,7 @@
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index f3c7c78..5661c7e 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -784,6 +784,7 @@
#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */
#define RTSYSTEMS_CT29B_PID 0x9e54 /* CT29B Radio Cable */
+#define RTSYSTEMS_RTS01_PID 0x9e57 /* USB-RTS01 Radio Cable */
/*
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 105a6d8..9b026bf 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -39,13 +39,6 @@
static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
-/* we want to look at all devices, as the vendor/product id can change
- * depending on the command line argument */
-static const struct usb_device_id generic_serial_ids[] = {
- {.driver_info = 42},
- {}
-};
-
/* All of the device info needed for the Generic Serial Converter */
struct usb_serial_driver usb_serial_generic_device = {
.driver = {
@@ -79,7 +72,8 @@
USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT;
/* register our generic driver with ourselves */
- retval = usb_serial_register_drivers(serial_drivers, "usbserial_generic", generic_serial_ids);
+ retval = usb_serial_register_drivers(serial_drivers,
+ "usbserial_generic", generic_device_ids);
#endif
return retval;
}
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index d0ec1aa..a71fa0a 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -309,13 +309,16 @@
MCT_U232_SET_REQUEST_TYPE,
0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE,
WDR_TIMEOUT);
- if (rc < 0)
- dev_err(&serial->dev->dev,
- "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+ kfree(buf);
+
dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
- kfree(buf);
- return rc;
+ if (rc < 0) {
+ dev_err(&serial->dev->dev,
+ "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+ return rc;
+ }
+ return 0;
} /* mct_u232_set_modem_ctrl */
static int mct_u232_get_modem_stat(struct usb_serial *serial,
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 81423f7..d47eb06 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -222,14 +222,6 @@
metro_priv->throttled = 0;
spin_unlock_irqrestore(&metro_priv->lock, flags);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
/* Clear the urb pipe. */
usb_clear_halt(serial->dev, port->interrupt_in_urb->pipe);
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 29160f8..57eca24 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -190,7 +190,7 @@
static int device_type;
-static const struct usb_device_id id_table[] __devinitconst = {
+static const struct usb_device_id id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)},
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 1aae902..417ab1b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -47,6 +47,7 @@
/* Function prototypes */
static int option_probe(struct usb_serial *serial,
const struct usb_device_id *id);
+static void option_release(struct usb_serial *serial);
static int option_send_setup(struct usb_serial_port *port);
static void option_instat_callback(struct urb *urb);
@@ -150,6 +151,7 @@
#define HUAWEI_PRODUCT_E14AC 0x14AC
#define HUAWEI_PRODUCT_K3806 0x14AE
#define HUAWEI_PRODUCT_K4605 0x14C6
+#define HUAWEI_PRODUCT_K5005 0x14C8
#define HUAWEI_PRODUCT_K3770 0x14C9
#define HUAWEI_PRODUCT_K3771 0x14CA
#define HUAWEI_PRODUCT_K4510 0x14CB
@@ -234,6 +236,7 @@
#define NOVATELWIRELESS_PRODUCT_G1 0xA001
#define NOVATELWIRELESS_PRODUCT_G1_M 0xA002
#define NOVATELWIRELESS_PRODUCT_G2 0xA010
+#define NOVATELWIRELESS_PRODUCT_MC551 0xB001
/* AMOI PRODUCTS */
#define AMOI_VENDOR_ID 0x1614
@@ -425,7 +428,7 @@
#define SAMSUNG_VENDOR_ID 0x04e8
#define SAMSUNG_PRODUCT_GT_B3730 0x6889
-/* YUGA products www.yuga-info.com*/
+/* YUGA products www.yuga-info.com gavin.kx@qq.com */
#define YUGA_VENDOR_ID 0x257A
#define YUGA_PRODUCT_CEM600 0x1601
#define YUGA_PRODUCT_CEM610 0x1602
@@ -442,6 +445,8 @@
#define YUGA_PRODUCT_CEU516 0x160C
#define YUGA_PRODUCT_CEU528 0x160D
#define YUGA_PRODUCT_CEU526 0x160F
+#define YUGA_PRODUCT_CEU881 0x161F
+#define YUGA_PRODUCT_CEU882 0x162F
#define YUGA_PRODUCT_CWM600 0x2601
#define YUGA_PRODUCT_CWM610 0x2602
@@ -457,23 +462,26 @@
#define YUGA_PRODUCT_CWU518 0x260B
#define YUGA_PRODUCT_CWU516 0x260C
#define YUGA_PRODUCT_CWU528 0x260D
+#define YUGA_PRODUCT_CWU581 0x260E
#define YUGA_PRODUCT_CWU526 0x260F
+#define YUGA_PRODUCT_CWU582 0x261F
+#define YUGA_PRODUCT_CWU583 0x262F
-#define YUGA_PRODUCT_CLM600 0x2601
-#define YUGA_PRODUCT_CLM610 0x2602
-#define YUGA_PRODUCT_CLM500 0x2603
-#define YUGA_PRODUCT_CLM510 0x2604
-#define YUGA_PRODUCT_CLM800 0x2605
-#define YUGA_PRODUCT_CLM900 0x2606
+#define YUGA_PRODUCT_CLM600 0x3601
+#define YUGA_PRODUCT_CLM610 0x3602
+#define YUGA_PRODUCT_CLM500 0x3603
+#define YUGA_PRODUCT_CLM510 0x3604
+#define YUGA_PRODUCT_CLM800 0x3605
+#define YUGA_PRODUCT_CLM900 0x3606
-#define YUGA_PRODUCT_CLU718 0x2607
-#define YUGA_PRODUCT_CLU716 0x2608
-#define YUGA_PRODUCT_CLU728 0x2609
-#define YUGA_PRODUCT_CLU726 0x260A
-#define YUGA_PRODUCT_CLU518 0x260B
-#define YUGA_PRODUCT_CLU516 0x260C
-#define YUGA_PRODUCT_CLU528 0x260D
-#define YUGA_PRODUCT_CLU526 0x260F
+#define YUGA_PRODUCT_CLU718 0x3607
+#define YUGA_PRODUCT_CLU716 0x3608
+#define YUGA_PRODUCT_CLU728 0x3609
+#define YUGA_PRODUCT_CLU726 0x360A
+#define YUGA_PRODUCT_CLU518 0x360B
+#define YUGA_PRODUCT_CLU516 0x360C
+#define YUGA_PRODUCT_CLU528 0x360D
+#define YUGA_PRODUCT_CLU526 0x360F
/* Viettel products */
#define VIETTEL_VENDOR_ID 0x2262
@@ -489,6 +497,19 @@
/* MediaTek products */
#define MEDIATEK_VENDOR_ID 0x0e8d
+#define MEDIATEK_PRODUCT_DC_1COM 0x00a0
+#define MEDIATEK_PRODUCT_DC_4COM 0x00a5
+#define MEDIATEK_PRODUCT_DC_5COM 0x00a4
+#define MEDIATEK_PRODUCT_7208_1COM 0x7101
+#define MEDIATEK_PRODUCT_7208_2COM 0x7102
+#define MEDIATEK_PRODUCT_FP_1COM 0x0003
+#define MEDIATEK_PRODUCT_FP_2COM 0x0023
+#define MEDIATEK_PRODUCT_FPDC_1COM 0x0043
+#define MEDIATEK_PRODUCT_FPDC_2COM 0x0033
+
+/* Cellient products */
+#define CELLIENT_VENDOR_ID 0x2692
+#define CELLIENT_PRODUCT_MEN200 0x9005
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
@@ -542,6 +563,10 @@
.reserved = BIT(1),
};
+static const struct option_blacklist_info net_intf2_blacklist = {
+ .reserved = BIT(2),
+};
+
static const struct option_blacklist_info net_intf3_blacklist = {
.reserved = BIT(3),
};
@@ -666,6 +691,11 @@
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x31) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x32) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) },
@@ -722,6 +752,8 @@
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1_M) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
+ /* Novatel Ovation MC551 a.k.a. Verizon USB551L */
+ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
@@ -1080,6 +1112,8 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
@@ -1209,6 +1243,11 @@
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) },
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) },
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU881) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU882) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU581) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU582) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU583) },
{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
{ USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */
@@ -1216,6 +1255,18 @@
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) }, /* MediaTek MT6276M modem & app port */
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_1COM, 0x02, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_2COM, 0x02, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
@@ -1245,7 +1296,7 @@
.ioctl = usb_wwan_ioctl,
.attach = usb_wwan_startup,
.disconnect = usb_wwan_disconnect,
- .release = usb_wwan_release,
+ .release = option_release,
.read_int_callback = option_instat_callback,
#ifdef CONFIG_PM
.suspend = usb_wwan_suspend,
@@ -1259,35 +1310,6 @@
static bool debug;
-/* per port private data */
-
-#define N_IN_URB 4
-#define N_OUT_URB 4
-#define IN_BUFLEN 4096
-#define OUT_BUFLEN 4096
-
-struct option_port_private {
- /* Input endpoints and buffer for this port */
- struct urb *in_urbs[N_IN_URB];
- u8 *in_buffer[N_IN_URB];
- /* Output endpoints and buffer for this port */
- struct urb *out_urbs[N_OUT_URB];
- u8 *out_buffer[N_OUT_URB];
- unsigned long out_busy; /* Bit vector of URBs in use */
- int opened;
- struct usb_anchor delayed;
-
- /* Settings for the port */
- int rts_state; /* Handshaking pins (outputs) */
- int dtr_state;
- int cts_state; /* Handshaking pins (inputs) */
- int dsr_state;
- int dcd_state;
- int ri_state;
-
- unsigned long tx_start_time[N_OUT_URB];
-};
-
module_usb_serial_driver(serial_drivers, option_ids);
static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason,
@@ -1356,12 +1378,22 @@
return 0;
}
+static void option_release(struct usb_serial *serial)
+{
+ struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
+
+ usb_wwan_release(serial);
+
+ kfree(priv);
+}
+
static void option_instat_callback(struct urb *urb)
{
int err;
int status = urb->status;
struct usb_serial_port *port = urb->context;
- struct option_port_private *portdata = usb_get_serial_port_data(port);
+ struct usb_wwan_port_private *portdata =
+ usb_get_serial_port_data(port);
dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
@@ -1421,7 +1453,7 @@
struct usb_serial *serial = port->serial;
struct usb_wwan_intf_private *intfdata =
(struct usb_wwan_intf_private *) serial->private;
- struct option_port_private *portdata;
+ struct usb_wwan_port_private *portdata;
int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
int val = 0;
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 0d5fe59..996015c 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -105,7 +105,13 @@
{USB_DEVICE(0x1410, 0xa021)}, /* Novatel Gobi 3000 Composite */
{USB_DEVICE(0x413c, 0x8193)}, /* Dell Gobi 3000 QDL */
{USB_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */
+ {USB_DEVICE(0x1199, 0x9010)}, /* Sierra Wireless Gobi 3000 QDL */
+ {USB_DEVICE(0x1199, 0x9012)}, /* Sierra Wireless Gobi 3000 QDL */
{USB_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+ {USB_DEVICE(0x1199, 0x9014)}, /* Sierra Wireless Gobi 3000 QDL */
+ {USB_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */
+ {USB_DEVICE(0x1199, 0x9018)}, /* Sierra Wireless Gobi 3000 QDL */
+ {USB_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */
{USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */
{USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */
{ } /* Terminating entry */
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ba54a0a..d423d36 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -294,6 +294,10 @@
{ USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
+ /* AT&T Direct IP LTE modems */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
+ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+ },
{ USB_DEVICE(0x0f3d, 0x68A3), /* Airprime/Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 6a1b609..27483f9 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -659,12 +659,14 @@
static struct usb_serial_driver *search_serial_device(
struct usb_interface *iface)
{
- const struct usb_device_id *id;
+ const struct usb_device_id *id = NULL;
struct usb_serial_driver *drv;
+ struct usb_driver *driver = to_usb_driver(iface->dev.driver);
/* Check if the usb id matches a known device */
list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
- id = get_iface_id(drv, iface);
+ if (drv->usb_driver == driver)
+ id = get_iface_id(drv, iface);
if (id)
return drv;
}
@@ -755,7 +757,7 @@
if (retval) {
dbg("sub driver rejected device");
- kfree(serial);
+ usb_serial_put(serial);
module_put(type->driver.owner);
return retval;
}
@@ -827,7 +829,7 @@
*/
if (num_bulk_in == 0 || num_bulk_out == 0) {
dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n");
- kfree(serial);
+ usb_serial_put(serial);
module_put(type->driver.owner);
return -ENODEV;
}
@@ -841,7 +843,7 @@
if (num_ports == 0) {
dev_err(&interface->dev,
"Generic device with no bulk out, not allowed.\n");
- kfree(serial);
+ usb_serial_put(serial);
module_put(type->driver.owner);
return -EIO;
}
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index a324a5d..11418da 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -202,6 +202,12 @@
if (us->fflags & US_FL_NO_READ_CAPACITY_16)
sdev->no_read_capacity_16 = 1;
+ /*
+ * Many devices do not respond properly to READ_CAPACITY_16.
+ * Tell the SCSI layer to try READ_CAPACITY_10 first.
+ */
+ sdev->try_rc_10_first = 1;
+
/* assume SPC3 or latter devices support sense size > 18 */
if (sdev->scsi_level > SCSI_SPC_2)
us->fflags |= US_FL_SANE_SENSE;
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 94dbd25..112156f 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -191,7 +191,9 @@
struct vhost_dev *dev = data;
struct vhost_work *work = NULL;
unsigned uninitialized_var(seq);
+ mm_segment_t oldfs = get_fs();
+ set_fs(USER_DS);
use_mm(dev->mm);
for (;;) {
@@ -229,6 +231,7 @@
}
unuse_mm(dev->mm);
+ set_fs(oldfs);
return 0;
}
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index fa2b037..2979292 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -88,7 +88,7 @@
config LCD_TOSA
tristate "Sharp SL-6000 LCD Driver"
- depends on SPI && MACH_TOSA
+ depends on I2C && SPI && MACH_TOSA
help
If you have an Sharp SL-6000 Zaurus say Y to enable a driver
for its LCD.
diff --git a/drivers/video/backlight/ili9320.c b/drivers/video/backlight/ili9320.c
index 6c93993..9327cd1 100644
--- a/drivers/video/backlight/ili9320.c
+++ b/drivers/video/backlight/ili9320.c
@@ -263,7 +263,7 @@
EXPORT_SYMBOL_GPL(ili9320_probe_spi);
-int __devexit ili9320_remove(struct ili9320 *ili)
+int ili9320_remove(struct ili9320 *ili)
{
ili9320_power(ili, FB_BLANK_POWERDOWN);
diff --git a/drivers/video/bfin_adv7393fb.c b/drivers/video/bfin_adv7393fb.c
index 33ea874..9bdd4b0 100644
--- a/drivers/video/bfin_adv7393fb.c
+++ b/drivers/video/bfin_adv7393fb.c
@@ -353,18 +353,16 @@
static int
adv7393_write_proc(struct file *file, const char __user * buffer,
- unsigned long count, void *data)
+ size_t count, void *data)
{
struct adv7393fb_device *fbdev = data;
- char line[8];
unsigned int val;
int ret;
- ret = copy_from_user(line, buffer, count);
+ ret = kstrtouint_from_user(buffer, count, 0, &val);
if (ret)
return -EFAULT;
- val = simple_strtoul(line, NULL, 0);
adv7393_write(fbdev->client, val >> 8, val & 0xff);
return count;
diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c
index 377dde3..c95b417 100644
--- a/drivers/video/broadsheetfb.c
+++ b/drivers/video/broadsheetfb.c
@@ -1211,7 +1211,7 @@
static struct platform_driver broadsheetfb_driver = {
.probe = broadsheetfb_probe,
- .remove = broadsheetfb_remove,
+ .remove = __devexit_p(broadsheetfb_remove),
.driver = {
.owner = THIS_MODULE,
.name = "broadsheetfb",
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index c2d11fe..e2c96d0 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -224,5 +224,19 @@
big letters. It fits between the sun 12x22 and the normal 8x16 font.
If other fonts are too big or too small for you, say Y, otherwise say N.
+config FONT_AUTOSELECT
+ def_bool y
+ depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE || STI_CONSOLE || USB_SISUSBVGA_CON
+ depends on !FONT_8x8
+ depends on !FONT_6x11
+ depends on !FONT_7x14
+ depends on !FONT_PEARL_8x8
+ depends on !FONT_ACORN_8x8
+ depends on !FONT_MINI_4x6
+ depends on !FONT_SUN8x16
+ depends on !FONT_SUN12x22
+ depends on !FONT_10x18
+ select FONT_8x16
+
endmenu
diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c
index ab0a8e5..85e4f44 100644
--- a/drivers/video/mbx/mbxfb.c
+++ b/drivers/video/mbx/mbxfb.c
@@ -1045,7 +1045,7 @@
static struct platform_driver mbxfb_driver = {
.probe = mbxfb_probe,
- .remove = mbxfb_remove,
+ .remove = __devexit_p(mbxfb_remove),
.suspend = mbxfb_suspend,
.resume = mbxfb_resume,
.driver = {
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index abbe691..49619b4 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -41,12 +41,14 @@
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/pinctrl/consumer.h>
-#include <mach/mxsfb.h>
+#include <linux/mxsfb.h>
#define REG_SET 4
#define REG_CLR 8
@@ -750,16 +752,43 @@
}
}
+static struct platform_device_id mxsfb_devtype[] = {
+ {
+ .name = "imx23-fb",
+ .driver_data = MXSFB_V3,
+ }, {
+ .name = "imx28-fb",
+ .driver_data = MXSFB_V4,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, mxsfb_devtype);
+
+static const struct of_device_id mxsfb_dt_ids[] = {
+ { .compatible = "fsl,imx23-lcdif", .data = &mxsfb_devtype[0], },
+ { .compatible = "fsl,imx28-lcdif", .data = &mxsfb_devtype[1], },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxsfb_dt_ids);
+
static int __devinit mxsfb_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id =
+ of_match_device(mxsfb_dt_ids, &pdev->dev);
struct mxsfb_platform_data *pdata = pdev->dev.platform_data;
struct resource *res;
struct mxsfb_info *host;
struct fb_info *fb_info;
struct fb_modelist *modelist;
struct pinctrl *pinctrl;
+ int panel_enable;
+ enum of_gpio_flags flags;
int i, ret;
+ if (of_id)
+ pdev->id_entry = of_id->data;
+
if (!pdata) {
dev_err(&pdev->dev, "No platformdata. Giving up\n");
return -ENODEV;
@@ -807,6 +836,22 @@
goto error_getclock;
}
+ panel_enable = of_get_named_gpio_flags(pdev->dev.of_node,
+ "panel-enable-gpios", 0, &flags);
+ if (gpio_is_valid(panel_enable)) {
+ unsigned long f = GPIOF_OUT_INIT_HIGH;
+ if (flags == OF_GPIO_ACTIVE_LOW)
+ f = GPIOF_OUT_INIT_LOW;
+ ret = devm_gpio_request_one(&pdev->dev, panel_enable,
+ f, "panel-enable");
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to request gpio %d: %d\n",
+ panel_enable, ret);
+ goto error_panel_enable;
+ }
+ }
+
fb_info->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
if (!fb_info->pseudo_palette) {
ret = -ENOMEM;
@@ -854,6 +899,7 @@
error_init_fb:
kfree(fb_info->pseudo_palette);
error_pseudo_pallette:
+error_panel_enable:
clk_put(host->clk);
error_getclock:
error_getpin:
@@ -901,19 +947,6 @@
writel(CTRL_RUN, host->base + LCDC_CTRL + REG_CLR);
}
-static struct platform_device_id mxsfb_devtype[] = {
- {
- .name = "imx23-fb",
- .driver_data = MXSFB_V3,
- }, {
- .name = "imx28-fb",
- .driver_data = MXSFB_V4,
- }, {
- /* sentinel */
- }
-};
-MODULE_DEVICE_TABLE(platform, mxsfb_devtype);
-
static struct platform_driver mxsfb_driver = {
.probe = mxsfb_probe,
.remove = __devexit_p(mxsfb_remove),
@@ -921,6 +954,7 @@
.id_table = mxsfb_devtype,
.driver = {
.name = DRIVER_NAME,
+ .of_match_table = mxsfb_dt_ids,
},
};
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 2ce9992..901576e 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -526,7 +526,7 @@
{
struct omap_dss_device *dssdev = to_dss_device(dev);
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- u8 errors;
+ u8 errors = 0;
int r;
mutex_lock(&td->lock);
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 72ded9c..58bd9c2 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -32,6 +32,7 @@
#include <linux/io.h>
#include <linux/device.h>
#include <linux/regulator/consumer.h>
+#include <linux/suspend.h>
#include <video/omapdss.h>
@@ -194,14 +195,35 @@
static inline void dss_uninitialize_debugfs(void)
{
}
-static inline int dss_debugfs_create_file(const char *name,
- void (*write)(struct seq_file *))
+int dss_debugfs_create_file(const char *name, void (*write)(struct seq_file *))
{
return 0;
}
#endif /* CONFIG_DEBUG_FS && CONFIG_OMAP2_DSS_DEBUG_SUPPORT */
/* PLATFORM DEVICE */
+static int omap_dss_pm_notif(struct notifier_block *b, unsigned long v, void *d)
+{
+ DSSDBG("pm notif %lu\n", v);
+
+ switch (v) {
+ case PM_SUSPEND_PREPARE:
+ DSSDBG("suspending displays\n");
+ return dss_suspend_all_devices();
+
+ case PM_POST_SUSPEND:
+ DSSDBG("resuming displays\n");
+ return dss_resume_all_devices();
+
+ default:
+ return 0;
+ }
+}
+
+static struct notifier_block omap_dss_pm_notif_block = {
+ .notifier_call = omap_dss_pm_notif,
+};
+
static int __init omap_dss_probe(struct platform_device *pdev)
{
struct omap_dss_board_info *pdata = pdev->dev.platform_data;
@@ -225,6 +247,8 @@
else if (pdata->default_device)
core.default_display_name = pdata->default_device->name;
+ register_pm_notifier(&omap_dss_pm_notif_block);
+
return 0;
err_debugfs:
@@ -234,6 +258,8 @@
static int omap_dss_remove(struct platform_device *pdev)
{
+ unregister_pm_notifier(&omap_dss_pm_notif_block);
+
dss_uninitialize_debugfs();
dss_uninit_overlays(pdev);
@@ -248,25 +274,9 @@
dss_disable_all_devices();
}
-static int omap_dss_suspend(struct platform_device *pdev, pm_message_t state)
-{
- DSSDBG("suspend %d\n", state.event);
-
- return dss_suspend_all_devices();
-}
-
-static int omap_dss_resume(struct platform_device *pdev)
-{
- DSSDBG("resume\n");
-
- return dss_resume_all_devices();
-}
-
static struct platform_driver omap_dss_driver = {
.remove = omap_dss_remove,
.shutdown = omap_dss_shutdown,
- .suspend = omap_dss_suspend,
- .resume = omap_dss_resume,
.driver = {
.name = "omapdss",
.owner = THIS_MODULE,
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 4749ac3..397d4ee 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -384,7 +384,7 @@
DSSDBG("dispc_runtime_put\n");
r = pm_runtime_put_sync(&dispc.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
static inline bool dispc_mgr_is_lcd(enum omap_channel channel)
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index ec363d8..14ce8cc 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -1075,7 +1075,7 @@
DSSDBG("dsi_runtime_put\n");
r = pm_runtime_put_sync(&dsi->pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
/* source clock for DSI PLL. this could also be PCLKFREE */
@@ -3724,7 +3724,7 @@
/* CLKIN4DDR = 16 * TXBYTECLKHS */
tlp_avail = thsbyte_clk * (blank - trans_lp);
- ttxclkesc = tdsi_fclk / lp_clk_div;
+ ttxclkesc = tdsi_fclk * lp_clk_div;
lp_inter = ((tlp_avail - 8 * thsbyte_clk - 5 * tdsi_fclk) / ttxclkesc -
26) / 16;
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 6ea1ff1..d2b5719 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -731,7 +731,7 @@
DSSDBG("dss_runtime_put\n");
r = pm_runtime_put_sync(&dss.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS && r != -EBUSY);
}
/* DEBUGFS */
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 8195c71..26a2430 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -138,7 +138,7 @@
DSSDBG("hdmi_runtime_put\n");
r = pm_runtime_put_sync(&hdmi.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
static int __init hdmi_init_display(struct omap_dss_device *dssdev)
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 3d8c206..7985fa1 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -141,7 +141,7 @@
DSSDBG("rfbi_runtime_put\n");
r = pm_runtime_put_sync(&rfbi.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
void rfbi_bus_lock(void)
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 2b89739..3907c8b 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -402,7 +402,7 @@
DSSDBG("venc_runtime_put\n");
r = pm_runtime_put_sync(&venc.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
static const struct venc_config *venc_timings_to_config(
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 5f9d8e690..ea7b661 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -361,7 +361,7 @@
result = (unsigned int)tmp / 1000;
dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
- pixclk, clk, result, clk / result);
+ pixclk, clk, result, result ? clk / result : clk);
return result;
}
@@ -1348,8 +1348,14 @@
writel(0, regs + VIDOSD_A(win, sfb->variant));
writel(0, regs + VIDOSD_B(win, sfb->variant));
writel(0, regs + VIDOSD_C(win, sfb->variant));
- reg = readl(regs + SHADOWCON);
- writel(reg & ~SHADOWCON_WINx_PROTECT(win), regs + SHADOWCON);
+
+ if (sfb->variant.has_shadowcon) {
+ reg = readl(sfb->regs + SHADOWCON);
+ reg &= ~(SHADOWCON_WINx_PROTECT(win) |
+ SHADOWCON_CHx_ENABLE(win) |
+ SHADOWCON_CHx_LOCAL_ENABLE(win));
+ writel(reg, sfb->regs + SHADOWCON);
+ }
}
static int __devinit s3c_fb_probe(struct platform_device *pdev)
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c
index cee7803..f3d3b9c 100644
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/savage/savagefb_driver.c
@@ -1351,7 +1351,7 @@
/* following part not present in X11 driver */
cr67 = vga_in8(0x3d5, par) & 0xf;
vga_out8(0x3d5, 0x50 | cr67, par);
- udelay(10000);
+ mdelay(10);
vga_out8(0x3d4, 0x67, par);
/* end of part */
vga_out8(0x3d5, reg->CR67 & ~0x0c, par);
@@ -1904,11 +1904,11 @@
vga_out8(0x3d4, 0x66, par);
cr66 = vga_in8(0x3d5, par);
vga_out8(0x3d5, cr66 | 0x02, par);
- udelay(10000);
+ mdelay(10);
vga_out8(0x3d4, 0x66, par);
vga_out8(0x3d5, cr66 & ~0x02, par); /* clear reset flag */
- udelay(10000);
+ mdelay(10);
/*
@@ -1918,11 +1918,11 @@
vga_out8(0x3d4, 0x3f, par);
cr3f = vga_in8(0x3d5, par);
vga_out8(0x3d5, cr3f | 0x08, par);
- udelay(10000);
+ mdelay(10);
vga_out8(0x3d4, 0x3f, par);
vga_out8(0x3d5, cr3f & ~0x08, par); /* clear reset flags */
- udelay(10000);
+ mdelay(10);
/* Savage ramdac speeds */
par->numClocks = 4;
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index bfbc15c..0908e60 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -47,7 +47,7 @@
struct task_struct *thread;
/* Waiting for host to ack the pages we released. */
- struct completion acked;
+ wait_queue_head_t acked;
/* Number of balloon pages we've told the Host we're not using. */
unsigned int num_pages;
@@ -89,29 +89,25 @@
static void balloon_ack(struct virtqueue *vq)
{
- struct virtio_balloon *vb;
- unsigned int len;
+ struct virtio_balloon *vb = vq->vdev->priv;
- vb = virtqueue_get_buf(vq, &len);
- if (vb)
- complete(&vb->acked);
+ wake_up(&vb->acked);
}
static void tell_host(struct virtio_balloon *vb, struct virtqueue *vq)
{
struct scatterlist sg;
+ unsigned int len;
sg_init_one(&sg, vb->pfns, sizeof(vb->pfns[0]) * vb->num_pfns);
- init_completion(&vb->acked);
-
/* We should always be able to add one buffer to an empty queue. */
if (virtqueue_add_buf(vq, &sg, 1, 0, vb, GFP_KERNEL) < 0)
BUG();
virtqueue_kick(vq);
/* When host has read buffer, this completes via balloon_ack */
- wait_for_completion(&vb->acked);
+ wait_event(vb->acked, virtqueue_get_buf(vq, &len));
}
static void set_page_pfns(u32 pfns[], struct page *page)
@@ -231,12 +227,8 @@
*/
static void stats_request(struct virtqueue *vq)
{
- struct virtio_balloon *vb;
- unsigned int len;
+ struct virtio_balloon *vb = vq->vdev->priv;
- vb = virtqueue_get_buf(vq, &len);
- if (!vb)
- return;
vb->need_stats_update = 1;
wake_up(&vb->config_change);
}
@@ -245,11 +237,14 @@
{
struct virtqueue *vq;
struct scatterlist sg;
+ unsigned int len;
vb->need_stats_update = 0;
update_balloon_stats(vb);
vq = vb->stats_vq;
+ if (!virtqueue_get_buf(vq, &len))
+ return;
sg_init_one(&sg, vb->stats, sizeof(vb->stats));
if (virtqueue_add_buf(vq, &sg, 1, 0, vb, GFP_KERNEL) < 0)
BUG();
@@ -358,6 +353,7 @@
INIT_LIST_HEAD(&vb->pages);
vb->num_pages = 0;
init_waitqueue_head(&vb->config_change);
+ init_waitqueue_head(&vb->acked);
vb->vdev = vdev;
vb->need_stats_update = 0;
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 979d6ee..5ceb1cd 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -60,7 +60,7 @@
config HDQ_MASTER_OMAP
tristate "OMAP HDQ driver"
- depends on SOC_OMAP2430 || ARCH_OMAP3
+ depends on ARCH_OMAP2PLUS
help
Say Y here if you want support for the 1-wire or HDQ Interface
on an OMAP processor.
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 5ef385b..291897c 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -1,7 +1,7 @@
/*
* drivers/w1/masters/omap_hdq.c
*
- * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007,2012 Texas Instruments, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -14,9 +14,9 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/err.h>
-#include <linux/clk.h>
#include <linux/io.h>
#include <linux/sched.h>
+#include <linux/pm_runtime.h>
#include <asm/irq.h>
#include <mach/hardware.h>
@@ -61,8 +61,6 @@
/* lock status update */
struct mutex hdq_mutex;
int hdq_usecount;
- struct clk *hdq_ick;
- struct clk *hdq_fck;
u8 hdq_irqstatus;
/* device lock */
spinlock_t hdq_spinlock;
@@ -102,20 +100,20 @@
/* HDQ register I/O routines */
static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset)
{
- return __raw_readb(hdq_data->hdq_base + offset);
+ return __raw_readl(hdq_data->hdq_base + offset);
}
static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val)
{
- __raw_writeb(val, hdq_data->hdq_base + offset);
+ __raw_writel(val, hdq_data->hdq_base + offset);
}
static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset,
u8 val, u8 mask)
{
- u8 new_val = (__raw_readb(hdq_data->hdq_base + offset) & ~mask)
+ u8 new_val = (__raw_readl(hdq_data->hdq_base + offset) & ~mask)
| (val & mask);
- __raw_writeb(new_val, hdq_data->hdq_base + offset);
+ __raw_writel(new_val, hdq_data->hdq_base + offset);
return new_val;
}
@@ -419,17 +417,8 @@
hdq_data->hdq_usecount++;
try_module_get(THIS_MODULE);
if (1 == hdq_data->hdq_usecount) {
- if (clk_enable(hdq_data->hdq_ick)) {
- dev_dbg(hdq_data->dev, "Can not enable ick\n");
- ret = -ENODEV;
- goto clk_err;
- }
- if (clk_enable(hdq_data->hdq_fck)) {
- dev_dbg(hdq_data->dev, "Can not enable fck\n");
- clk_disable(hdq_data->hdq_ick);
- ret = -ENODEV;
- goto clk_err;
- }
+
+ pm_runtime_get_sync(hdq_data->dev);
/* make sure HDQ is out of reset */
if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) &
@@ -450,9 +439,6 @@
}
}
-clk_err:
- clk_put(hdq_data->hdq_ick);
- clk_put(hdq_data->hdq_fck);
out:
mutex_unlock(&hdq_data->hdq_mutex);
rtn:
@@ -475,10 +461,8 @@
} else {
hdq_data->hdq_usecount--;
module_put(THIS_MODULE);
- if (0 == hdq_data->hdq_usecount) {
- clk_disable(hdq_data->hdq_ick);
- clk_disable(hdq_data->hdq_fck);
- }
+ if (0 == hdq_data->hdq_usecount)
+ pm_runtime_put_sync(hdq_data->dev);
}
mutex_unlock(&hdq_data->hdq_mutex);
@@ -591,35 +575,11 @@
goto err_ioremap;
}
- /* get interface & functional clock objects */
- hdq_data->hdq_ick = clk_get(&pdev->dev, "ick");
- if (IS_ERR(hdq_data->hdq_ick)) {
- dev_dbg(&pdev->dev, "Can't get HDQ ick clock object\n");
- ret = PTR_ERR(hdq_data->hdq_ick);
- goto err_ick;
- }
-
- hdq_data->hdq_fck = clk_get(&pdev->dev, "fck");
- if (IS_ERR(hdq_data->hdq_fck)) {
- dev_dbg(&pdev->dev, "Can't get HDQ fck clock object\n");
- ret = PTR_ERR(hdq_data->hdq_fck);
- goto err_fck;
- }
-
hdq_data->hdq_usecount = 0;
mutex_init(&hdq_data->hdq_mutex);
- if (clk_enable(hdq_data->hdq_ick)) {
- dev_dbg(&pdev->dev, "Can not enable ick\n");
- ret = -ENODEV;
- goto err_intfclk;
- }
-
- if (clk_enable(hdq_data->hdq_fck)) {
- dev_dbg(&pdev->dev, "Can not enable fck\n");
- ret = -ENODEV;
- goto err_fnclk;
- }
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION);
dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n",
@@ -641,9 +601,7 @@
omap_hdq_break(hdq_data);
- /* don't clock the HDQ until it is needed */
- clk_disable(hdq_data->hdq_ick);
- clk_disable(hdq_data->hdq_fck);
+ pm_runtime_put_sync(&pdev->dev);
omap_w1_master.data = hdq_data;
@@ -655,20 +613,11 @@
return 0;
-err_w1:
err_irq:
- clk_disable(hdq_data->hdq_fck);
+ pm_runtime_put_sync(&pdev->dev);
+err_w1:
+ pm_runtime_disable(&pdev->dev);
-err_fnclk:
- clk_disable(hdq_data->hdq_ick);
-
-err_intfclk:
- clk_put(hdq_data->hdq_fck);
-
-err_fck:
- clk_put(hdq_data->hdq_ick);
-
-err_ick:
iounmap(hdq_data->hdq_base);
err_ioremap:
@@ -696,8 +645,7 @@
mutex_unlock(&hdq_data->hdq_mutex);
/* remove module dependency */
- clk_put(hdq_data->hdq_ick);
- clk_put(hdq_data->hdq_fck);
+ pm_runtime_disable(&pdev->dev);
free_irq(INT_24XX_HDQ_IRQ, hdq_data);
platform_set_drvdata(pdev, NULL);
iounmap(hdq_data->hdq_base);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index fe819b7..c450cfc 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1115,10 +1115,10 @@
config BOOKE_WDT_DEFAULT_TIMEOUT
int "PowerPC Book-E Watchdog Timer Default Timeout"
depends on BOOKE_WDT
- default 38 if FSL_BOOKE
- range 0 63 if FSL_BOOKE
- default 3 if !FSL_BOOKE
- range 0 3 if !FSL_BOOKE
+ default 38 if PPC_FSL_BOOK3E
+ range 0 63 if PPC_FSL_BOOK3E
+ default 3 if !PPC_FSL_BOOK3E
+ range 0 3 if !PPC_FSL_BOOK3E
help
Select the default watchdog timer period to be used by the PowerPC
Book-E watchdog driver. A watchdog "event" occurs when the bit
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index ce0ab44..3fe82d0 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -37,7 +37,7 @@
u32 booke_wdt_enabled;
u32 booke_wdt_period = CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT;
-#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_PPC_FSL_BOOK3E
#define WDTP(x) ((((x)&0x3)<<30)|(((x)&0x3c)<<15))
#define WDTP_MASK (WDTP(0x3f))
#else
@@ -190,7 +190,7 @@
case WDIOC_SETTIMEOUT:
if (get_user(tmp, p))
return -EFAULT;
-#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_PPC_FSL_BOOK3E
/* period of 1 gives the largest possible timeout */
if (tmp > period_to_sec(1))
return -EINVAL;
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 2b76381..1eff743 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -146,7 +146,7 @@
} __attribute__((packed));
static unsigned int hpwdt_nmi_decoding;
-static unsigned int allow_kdump;
+static unsigned int allow_kdump = 1;
static unsigned int is_icru;
static DEFINE_SPINLOCK(rom_lock);
static void *cru_rom_addr;
@@ -756,6 +756,8 @@
static void hpwdt_exit_nmi_decoding(void)
{
unregister_nmi_handler(NMI_UNKNOWN, "hpwdt");
+ unregister_nmi_handler(NMI_SERR, "hpwdt");
+ unregister_nmi_handler(NMI_IO_CHECK, "hpwdt");
if (cru_rom_addr)
iounmap(cru_rom_addr);
}
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index bc47e90..9c2c27c 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -699,3 +699,4 @@
MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 8285d65..02ebfd5 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -430,6 +430,12 @@
#define omap_wdt_resume NULL
#endif
+static const struct of_device_id omap_wdt_of_match[] = {
+ { .compatible = "ti,omap3-wdt", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap_wdt_of_match);
+
static struct platform_driver omap_wdt_driver = {
.probe = omap_wdt_probe,
.remove = __devexit_p(omap_wdt_remove),
@@ -439,6 +445,7 @@
.driver = {
.owner = THIS_MODULE,
.name = "omap_wdt",
+ .of_match_table = omap_wdt_of_match,
},
};
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index afcd136..e4841c3 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -4,7 +4,7 @@
* Watchdog driver for ARM SP805 watchdog module
*
* Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2 or later. This program is licensed "as is" without any
@@ -331,6 +331,6 @@
module_amba_driver(sp805_wdt_driver);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ARM SP805 Watchdog Driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index 672d169..ef8edec 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -349,7 +349,7 @@
sizeof(struct watchdog_info)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
err = watchdog_get_status(wdd, &val);
- if (err)
+ if (err == -ENODEV)
return err;
return put_user(val, p);
case WDIOC_GETBOOTSTATUS:
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 6908e4c..7595581 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -827,6 +827,9 @@
handle_edge_irq, "event");
xen_irq_info_evtchn_init(irq, evtchn);
+ } else {
+ struct irq_info *info = info_for_irq(irq);
+ WARN_ON(info == NULL || info->type != IRQT_EVTCHN);
}
out:
@@ -862,6 +865,9 @@
xen_irq_info_ipi_init(cpu, irq, evtchn, ipi);
bind_evtchn_to_cpu(evtchn, cpu);
+ } else {
+ struct irq_info *info = info_for_irq(irq);
+ WARN_ON(info == NULL || info->type != IRQT_IPI);
}
out:
@@ -939,6 +945,9 @@
xen_irq_info_virq_init(cpu, irq, evtchn, virq);
bind_evtchn_to_cpu(evtchn, cpu);
+ } else {
+ struct irq_info *info = info_for_irq(irq);
+ WARN_ON(info == NULL || info->type != IRQT_VIRQ);
}
out:
diff --git a/drivers/xen/pci.c b/drivers/xen/pci.c
index b84bf0b..18fff88 100644
--- a/drivers/xen/pci.c
+++ b/drivers/xen/pci.c
@@ -59,7 +59,7 @@
#ifdef CONFIG_ACPI
handle = DEVICE_ACPI_HANDLE(&pci_dev->dev);
- if (!handle)
+ if (!handle && pci_dev->bus->bridge)
handle = DEVICE_ACPI_HANDLE(pci_dev->bus->bridge);
#ifdef CONFIG_PCI_IOV
if (!handle && pci_dev->is_virtfn)
diff --git a/fs/9p/v9fs.h b/fs/9p/v9fs.h
index e78956c..34c59f1 100644
--- a/fs/9p/v9fs.h
+++ b/fs/9p/v9fs.h
@@ -144,7 +144,7 @@
extern void v9fs_session_cancel(struct v9fs_session_info *v9ses);
extern void v9fs_session_begin_cancel(struct v9fs_session_info *v9ses);
extern struct dentry *v9fs_vfs_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nameidata);
+ unsigned int flags);
extern int v9fs_vfs_unlink(struct inode *i, struct dentry *d);
extern int v9fs_vfs_rmdir(struct inode *i, struct dentry *d);
extern int v9fs_vfs_rename(struct inode *old_dir, struct dentry *old_dentry,
diff --git a/fs/9p/vfs_dentry.c b/fs/9p/vfs_dentry.c
index d529437..64600b5 100644
--- a/fs/9p/vfs_dentry.c
+++ b/fs/9p/vfs_dentry.c
@@ -100,13 +100,13 @@
}
}
-static int v9fs_lookup_revalidate(struct dentry *dentry, struct nameidata *nd)
+static int v9fs_lookup_revalidate(struct dentry *dentry, unsigned int flags)
{
struct p9_fid *fid;
struct inode *inode;
struct v9fs_inode *v9inode;
- if (nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
inode = dentry->d_inode;
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 57ccb75..cbf9dbb 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -712,88 +712,34 @@
}
/**
- * v9fs_vfs_create - VFS hook to create files
+ * v9fs_vfs_create - VFS hook to create a regular file
+ *
+ * open(.., O_CREAT) is handled in v9fs_vfs_atomic_open(). This is only called
+ * for mknod(2).
+ *
* @dir: directory inode that is being created
* @dentry: dentry that is being deleted
* @mode: create permissions
- * @nd: path information
*
*/
static int
v9fs_vfs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
- int err;
- u32 perm;
- int flags;
- struct file *filp;
- struct v9fs_inode *v9inode;
- struct v9fs_session_info *v9ses;
- struct p9_fid *fid, *inode_fid;
+ struct v9fs_session_info *v9ses = v9fs_inode2v9ses(dir);
+ u32 perm = unixmode2p9mode(v9ses, mode);
+ struct p9_fid *fid;
- err = 0;
- fid = NULL;
- v9ses = v9fs_inode2v9ses(dir);
- perm = unixmode2p9mode(v9ses, mode);
- if (nd)
- flags = nd->intent.open.flags;
- else
- flags = O_RDWR;
-
- fid = v9fs_create(v9ses, dir, dentry, NULL, perm,
- v9fs_uflags2omode(flags,
- v9fs_proto_dotu(v9ses)));
- if (IS_ERR(fid)) {
- err = PTR_ERR(fid);
- fid = NULL;
- goto error;
- }
+ /* P9_OEXCL? */
+ fid = v9fs_create(v9ses, dir, dentry, NULL, perm, P9_ORDWR);
+ if (IS_ERR(fid))
+ return PTR_ERR(fid);
v9fs_invalidate_inode_attr(dir);
- /* if we are opening a file, assign the open fid to the file */
- if (nd) {
- v9inode = V9FS_I(dentry->d_inode);
- mutex_lock(&v9inode->v_mutex);
- if (v9ses->cache && !v9inode->writeback_fid &&
- ((flags & O_ACCMODE) != O_RDONLY)) {
- /*
- * clone a fid and add it to writeback_fid
- * we do it during open time instead of
- * page dirty time via write_begin/page_mkwrite
- * because we want write after unlink usecase
- * to work.
- */
- inode_fid = v9fs_writeback_fid(dentry);
- if (IS_ERR(inode_fid)) {
- err = PTR_ERR(inode_fid);
- mutex_unlock(&v9inode->v_mutex);
- goto error;
- }
- v9inode->writeback_fid = (void *) inode_fid;
- }
- mutex_unlock(&v9inode->v_mutex);
- filp = lookup_instantiate_filp(nd, dentry, generic_file_open);
- if (IS_ERR(filp)) {
- err = PTR_ERR(filp);
- goto error;
- }
-
- filp->private_data = fid;
-#ifdef CONFIG_9P_FSCACHE
- if (v9ses->cache)
- v9fs_cache_inode_set_cookie(dentry->d_inode, filp);
-#endif
- } else
- p9_client_clunk(fid);
+ p9_client_clunk(fid);
return 0;
-
-error:
- if (fid)
- p9_client_clunk(fid);
-
- return err;
}
/**
@@ -839,7 +785,7 @@
*/
struct dentry *v9fs_vfs_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nameidata)
+ unsigned int flags)
{
struct dentry *res;
struct super_block *sb;
@@ -849,8 +795,8 @@
char *name;
int result = 0;
- p9_debug(P9_DEBUG_VFS, "dir: %p dentry: (%s) %p nameidata: %p\n",
- dir, dentry->d_name.name, dentry, nameidata);
+ p9_debug(P9_DEBUG_VFS, "dir: %p dentry: (%s) %p flags: %x\n",
+ dir, dentry->d_name.name, dentry, flags);
if (dentry->d_name.len > NAME_MAX)
return ERR_PTR(-ENAMETOOLONG);
@@ -910,6 +856,86 @@
return ERR_PTR(result);
}
+static int
+v9fs_vfs_atomic_open(struct inode *dir, struct dentry *dentry,
+ struct file *file, unsigned flags, umode_t mode,
+ int *opened)
+{
+ int err;
+ u32 perm;
+ struct v9fs_inode *v9inode;
+ struct v9fs_session_info *v9ses;
+ struct p9_fid *fid, *inode_fid;
+ struct dentry *res = NULL;
+
+ if (d_unhashed(dentry)) {
+ res = v9fs_vfs_lookup(dir, dentry, 0);
+ if (IS_ERR(res))
+ return PTR_ERR(res);
+
+ if (res)
+ dentry = res;
+ }
+
+ /* Only creates */
+ if (!(flags & O_CREAT) || dentry->d_inode)
+ return finish_no_open(file, res);
+
+ err = 0;
+ fid = NULL;
+ v9ses = v9fs_inode2v9ses(dir);
+ perm = unixmode2p9mode(v9ses, mode);
+ fid = v9fs_create(v9ses, dir, dentry, NULL, perm,
+ v9fs_uflags2omode(flags,
+ v9fs_proto_dotu(v9ses)));
+ if (IS_ERR(fid)) {
+ err = PTR_ERR(fid);
+ fid = NULL;
+ goto error;
+ }
+
+ v9fs_invalidate_inode_attr(dir);
+ v9inode = V9FS_I(dentry->d_inode);
+ mutex_lock(&v9inode->v_mutex);
+ if (v9ses->cache && !v9inode->writeback_fid &&
+ ((flags & O_ACCMODE) != O_RDONLY)) {
+ /*
+ * clone a fid and add it to writeback_fid
+ * we do it during open time instead of
+ * page dirty time via write_begin/page_mkwrite
+ * because we want write after unlink usecase
+ * to work.
+ */
+ inode_fid = v9fs_writeback_fid(dentry);
+ if (IS_ERR(inode_fid)) {
+ err = PTR_ERR(inode_fid);
+ mutex_unlock(&v9inode->v_mutex);
+ goto error;
+ }
+ v9inode->writeback_fid = (void *) inode_fid;
+ }
+ mutex_unlock(&v9inode->v_mutex);
+ err = finish_open(file, dentry, generic_file_open, opened);
+ if (err)
+ goto error;
+
+ file->private_data = fid;
+#ifdef CONFIG_9P_FSCACHE
+ if (v9ses->cache)
+ v9fs_cache_inode_set_cookie(dentry->d_inode, file);
+#endif
+
+ *opened |= FILE_CREATED;
+out:
+ dput(res);
+ return err;
+
+error:
+ if (fid)
+ p9_client_clunk(fid);
+ goto out;
+}
+
/**
* v9fs_vfs_unlink - VFS unlink hook to delete an inode
* @i: inode that is being unlinked
@@ -1488,6 +1514,7 @@
static const struct inode_operations v9fs_dir_inode_operations_dotu = {
.create = v9fs_vfs_create,
.lookup = v9fs_vfs_lookup,
+ .atomic_open = v9fs_vfs_atomic_open,
.symlink = v9fs_vfs_symlink,
.link = v9fs_vfs_link,
.unlink = v9fs_vfs_unlink,
@@ -1502,6 +1529,7 @@
static const struct inode_operations v9fs_dir_inode_operations = {
.create = v9fs_vfs_create,
.lookup = v9fs_vfs_lookup,
+ .atomic_open = v9fs_vfs_atomic_open,
.unlink = v9fs_vfs_unlink,
.mkdir = v9fs_vfs_mkdir,
.rmdir = v9fs_vfs_rmdir,
diff --git a/fs/9p/vfs_inode_dotl.c b/fs/9p/vfs_inode_dotl.c
index e3dd2a1..4089554 100644
--- a/fs/9p/vfs_inode_dotl.c
+++ b/fs/9p/vfs_inode_dotl.c
@@ -230,20 +230,25 @@
* @dir: directory inode that is being created
* @dentry: dentry that is being deleted
* @mode: create permissions
- * @nd: path information
*
*/
static int
v9fs_vfs_create_dotl(struct inode *dir, struct dentry *dentry, umode_t omode,
- struct nameidata *nd)
+ bool excl)
+{
+ return v9fs_vfs_mknod_dotl(dir, dentry, omode, 0);
+}
+
+static int
+v9fs_vfs_atomic_open_dotl(struct inode *dir, struct dentry *dentry,
+ struct file *file, unsigned flags, umode_t omode,
+ int *opened)
{
int err = 0;
gid_t gid;
- int flags;
umode_t mode;
char *name = NULL;
- struct file *filp;
struct p9_qid qid;
struct inode *inode;
struct p9_fid *fid = NULL;
@@ -251,18 +256,22 @@
struct p9_fid *dfid, *ofid, *inode_fid;
struct v9fs_session_info *v9ses;
struct posix_acl *pacl = NULL, *dacl = NULL;
+ struct dentry *res = NULL;
+
+ if (d_unhashed(dentry)) {
+ res = v9fs_vfs_lookup(dir, dentry, 0);
+ if (IS_ERR(res))
+ return PTR_ERR(res);
+
+ if (res)
+ dentry = res;
+ }
+
+ /* Only creates */
+ if (!(flags & O_CREAT) || dentry->d_inode)
+ return finish_no_open(file, res);
v9ses = v9fs_inode2v9ses(dir);
- if (nd)
- flags = nd->intent.open.flags;
- else {
- /*
- * create call without LOOKUP_OPEN is due
- * to mknod of regular files. So use mknod
- * operation.
- */
- return v9fs_vfs_mknod_dotl(dir, dentry, omode, 0);
- }
name = (char *) dentry->d_name.name;
p9_debug(P9_DEBUG_VFS, "name:%s flags:0x%x mode:0x%hx\n",
@@ -272,7 +281,7 @@
if (IS_ERR(dfid)) {
err = PTR_ERR(dfid);
p9_debug(P9_DEBUG_VFS, "fid lookup failed %d\n", err);
- return err;
+ goto out;
}
/* clone a fid to use for creation */
@@ -280,7 +289,7 @@
if (IS_ERR(ofid)) {
err = PTR_ERR(ofid);
p9_debug(P9_DEBUG_VFS, "p9_client_walk failed %d\n", err);
- return err;
+ goto out;
}
gid = v9fs_get_fsgid_for_create(dir);
@@ -345,17 +354,18 @@
}
mutex_unlock(&v9inode->v_mutex);
/* Since we are opening a file, assign the open fid to the file */
- filp = lookup_instantiate_filp(nd, dentry, generic_file_open);
- if (IS_ERR(filp)) {
- err = PTR_ERR(filp);
+ err = finish_open(file, dentry, generic_file_open, opened);
+ if (err)
goto err_clunk_old_fid;
- }
- filp->private_data = ofid;
+ file->private_data = ofid;
#ifdef CONFIG_9P_FSCACHE
if (v9ses->cache)
- v9fs_cache_inode_set_cookie(inode, filp);
+ v9fs_cache_inode_set_cookie(inode, file);
#endif
- return 0;
+ *opened |= FILE_CREATED;
+out:
+ dput(res);
+ return err;
error:
if (fid)
@@ -364,7 +374,7 @@
if (ofid)
p9_client_clunk(ofid);
v9fs_set_create_acl(NULL, &dacl, &pacl);
- return err;
+ goto out;
}
/**
@@ -982,6 +992,7 @@
const struct inode_operations v9fs_dir_inode_operations_dotl = {
.create = v9fs_vfs_create_dotl,
+ .atomic_open = v9fs_vfs_atomic_open_dotl,
.lookup = v9fs_vfs_lookup,
.link = v9fs_vfs_link_dotl,
.symlink = v9fs_vfs_symlink_dotl,
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index 8c92a9b..137d503 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -89,7 +89,7 @@
if (v9ses->cache)
sb->s_bdi->ra_pages = (VM_MAX_READAHEAD * 1024)/PAGE_CACHE_SIZE;
- sb->s_flags = flags | MS_ACTIVE | MS_DIRSYNC | MS_NOATIME;
+ sb->s_flags |= MS_ACTIVE | MS_DIRSYNC | MS_NOATIME;
if (!v9ses->cache)
sb->s_flags |= MS_SYNCHRONOUS;
@@ -137,7 +137,7 @@
goto close_session;
}
- sb = sget(fs_type, NULL, v9fs_set_super, v9ses);
+ sb = sget(fs_type, NULL, v9fs_set_super, flags, v9ses);
if (IS_ERR(sb)) {
retval = PTR_ERR(sb);
goto clunk_fid;
diff --git a/fs/adfs/dir.c b/fs/adfs/dir.c
index 3d83075a..b3be2e7 100644
--- a/fs/adfs/dir.c
+++ b/fs/adfs/dir.c
@@ -266,7 +266,7 @@
};
static struct dentry *
-adfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
+adfs_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
{
struct inode *inode = NULL;
struct object_info obj;
diff --git a/fs/adfs/super.c b/fs/adfs/super.c
index 06fdcc9..bdaec92 100644
--- a/fs/adfs/super.c
+++ b/fs/adfs/super.c
@@ -246,7 +246,6 @@
static void adfs_i_callback(struct rcu_head *head)
{
struct inode *inode = container_of(head, struct inode, i_rcu);
- INIT_LIST_HEAD(&inode->i_dentry);
kmem_cache_free(adfs_inode_cachep, ADFS_I(inode));
}
diff --git a/fs/affs/affs.h b/fs/affs/affs.h
index 1fceb32..6e21641 100644
--- a/fs/affs/affs.h
+++ b/fs/affs/affs.h
@@ -3,6 +3,7 @@
#include <linux/buffer_head.h>
#include <linux/amigaffs.h>
#include <linux/mutex.h>
+#include <linux/workqueue.h>
/* AmigaOS allows file names with up to 30 characters length.
* Names longer than that will be silently truncated. If you
@@ -100,6 +101,10 @@
char *s_prefix; /* Prefix for volumes and assigns. */
char s_volume[32]; /* Volume prefix for absolute symlinks. */
spinlock_t symlink_lock; /* protects the previous two */
+ struct super_block *sb; /* the VFS superblock object */
+ int work_queued; /* non-zero delayed work is queued */
+ struct delayed_work sb_work; /* superblock flush delayed work */
+ spinlock_t work_lock; /* protects sb_work and work_queued */
};
#define SF_INTL 0x0001 /* International filesystem. */
@@ -120,6 +125,8 @@
return sb->s_fs_info;
}
+void affs_mark_sb_dirty(struct super_block *sb);
+
/* amigaffs.c */
extern int affs_insert_hash(struct inode *inode, struct buffer_head *bh);
@@ -146,9 +153,9 @@
/* namei.c */
extern int affs_hash_name(struct super_block *sb, const u8 *name, unsigned int len);
-extern struct dentry *affs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *);
+extern struct dentry *affs_lookup(struct inode *dir, struct dentry *dentry, unsigned int);
extern int affs_unlink(struct inode *dir, struct dentry *dentry);
-extern int affs_create(struct inode *dir, struct dentry *dentry, umode_t mode, struct nameidata *);
+extern int affs_create(struct inode *dir, struct dentry *dentry, umode_t mode, bool);
extern int affs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode);
extern int affs_rmdir(struct inode *dir, struct dentry *dentry);
extern int affs_link(struct dentry *olddentry, struct inode *dir,
diff --git a/fs/affs/amigaffs.c b/fs/affs/amigaffs.c
index 52a6407..eb82ee5 100644
--- a/fs/affs/amigaffs.c
+++ b/fs/affs/amigaffs.c
@@ -122,22 +122,16 @@
}
static void
-affs_fix_dcache(struct dentry *dentry, u32 entry_ino)
+affs_fix_dcache(struct inode *inode, u32 entry_ino)
{
- struct inode *inode = dentry->d_inode;
- void *data = dentry->d_fsdata;
- struct list_head *head, *next;
-
+ struct dentry *dentry;
+ struct hlist_node *p;
spin_lock(&inode->i_lock);
- head = &inode->i_dentry;
- next = head->next;
- while (next != head) {
- dentry = list_entry(next, struct dentry, d_alias);
+ hlist_for_each_entry(dentry, p, &inode->i_dentry, d_alias) {
if (entry_ino == (u32)(long)dentry->d_fsdata) {
- dentry->d_fsdata = data;
+ dentry->d_fsdata = (void *)inode->i_ino;
break;
}
- next = next->next;
}
spin_unlock(&inode->i_lock);
}
@@ -177,7 +171,11 @@
}
affs_lock_dir(dir);
- affs_fix_dcache(dentry, link_ino);
+ /*
+ * if there's a dentry for that block, make it
+ * refer to inode itself.
+ */
+ affs_fix_dcache(inode, link_ino);
retval = affs_remove_hash(dir, link_bh);
if (retval) {
affs_unlock_dir(dir);
diff --git a/fs/affs/bitmap.c b/fs/affs/bitmap.c
index 3e26271..6e0be43 100644
--- a/fs/affs/bitmap.c
+++ b/fs/affs/bitmap.c
@@ -103,7 +103,7 @@
*(__be32 *)bh->b_data = cpu_to_be32(tmp - mask);
mark_buffer_dirty(bh);
- sb->s_dirt = 1;
+ affs_mark_sb_dirty(sb);
bm->bm_free++;
mutex_unlock(&sbi->s_bmlock);
@@ -248,7 +248,7 @@
*(__be32 *)bh->b_data = cpu_to_be32(tmp + mask);
mark_buffer_dirty(bh);
- sb->s_dirt = 1;
+ affs_mark_sb_dirty(sb);
mutex_unlock(&sbi->s_bmlock);
diff --git a/fs/affs/namei.c b/fs/affs/namei.c
index 4780694..ff65884 100644
--- a/fs/affs/namei.c
+++ b/fs/affs/namei.c
@@ -211,7 +211,7 @@
}
struct dentry *
-affs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
+affs_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
{
struct super_block *sb = dir->i_sb;
struct buffer_head *bh;
@@ -255,7 +255,7 @@
}
int
-affs_create(struct inode *dir, struct dentry *dentry, umode_t mode, struct nameidata *nd)
+affs_create(struct inode *dir, struct dentry *dentry, umode_t mode, bool excl)
{
struct super_block *sb = dir->i_sb;
struct inode *inode;
diff --git a/fs/affs/super.c b/fs/affs/super.c
index 0782653..c70f1e5 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -17,6 +17,7 @@
#include <linux/magic.h>
#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/writeback.h>
#include "affs.h"
extern struct timezone sys_tz;
@@ -25,15 +26,17 @@
static int affs_remount (struct super_block *sb, int *flags, char *data);
static void
-affs_commit_super(struct super_block *sb, int wait, int clean)
+affs_commit_super(struct super_block *sb, int wait)
{
struct affs_sb_info *sbi = AFFS_SB(sb);
struct buffer_head *bh = sbi->s_root_bh;
struct affs_root_tail *tail = AFFS_ROOT_TAIL(sb, bh);
- tail->bm_flag = cpu_to_be32(clean);
+ lock_buffer(bh);
secs_to_datestamp(get_seconds(), &tail->disk_change);
affs_fix_checksum(sb, bh);
+ unlock_buffer(bh);
+
mark_buffer_dirty(bh);
if (wait)
sync_dirty_buffer(bh);
@@ -45,9 +48,7 @@
struct affs_sb_info *sbi = AFFS_SB(sb);
pr_debug("AFFS: put_super()\n");
- if (!(sb->s_flags & MS_RDONLY) && sb->s_dirt)
- affs_commit_super(sb, 1, 1);
-
+ cancel_delayed_work_sync(&sbi->sb_work);
kfree(sbi->s_prefix);
affs_free_bitmap(sb);
affs_brelse(sbi->s_root_bh);
@@ -55,28 +56,45 @@
sb->s_fs_info = NULL;
}
-static void
-affs_write_super(struct super_block *sb)
-{
- lock_super(sb);
- if (!(sb->s_flags & MS_RDONLY))
- affs_commit_super(sb, 1, 2);
- sb->s_dirt = 0;
- unlock_super(sb);
-
- pr_debug("AFFS: write_super() at %lu, clean=2\n", get_seconds());
-}
-
static int
affs_sync_fs(struct super_block *sb, int wait)
{
- lock_super(sb);
- affs_commit_super(sb, wait, 2);
- sb->s_dirt = 0;
- unlock_super(sb);
+ affs_commit_super(sb, wait);
return 0;
}
+static void flush_superblock(struct work_struct *work)
+{
+ struct affs_sb_info *sbi;
+ struct super_block *sb;
+
+ sbi = container_of(work, struct affs_sb_info, sb_work.work);
+ sb = sbi->sb;
+
+ spin_lock(&sbi->work_lock);
+ sbi->work_queued = 0;
+ spin_unlock(&sbi->work_lock);
+
+ affs_commit_super(sb, 1);
+}
+
+void affs_mark_sb_dirty(struct super_block *sb)
+{
+ struct affs_sb_info *sbi = AFFS_SB(sb);
+ unsigned long delay;
+
+ if (sb->s_flags & MS_RDONLY)
+ return;
+
+ spin_lock(&sbi->work_lock);
+ if (!sbi->work_queued) {
+ delay = msecs_to_jiffies(dirty_writeback_interval * 10);
+ queue_delayed_work(system_long_wq, &sbi->sb_work, delay);
+ sbi->work_queued = 1;
+ }
+ spin_unlock(&sbi->work_lock);
+}
+
static struct kmem_cache * affs_inode_cachep;
static struct inode *affs_alloc_inode(struct super_block *sb)
@@ -138,7 +156,6 @@
.write_inode = affs_write_inode,
.evict_inode = affs_evict_inode,
.put_super = affs_put_super,
- .write_super = affs_write_super,
.sync_fs = affs_sync_fs,
.statfs = affs_statfs,
.remount_fs = affs_remount,
@@ -305,8 +322,11 @@
return -ENOMEM;
sb->s_fs_info = sbi;
+ sbi->sb = sb;
mutex_init(&sbi->s_bmlock);
spin_lock_init(&sbi->symlink_lock);
+ spin_lock_init(&sbi->work_lock);
+ INIT_DELAYED_WORK(&sbi->sb_work, flush_superblock);
if (!parse_options(data,&uid,&gid,&i,&reserved,&root_block,
&blocksize,&sbi->s_prefix,
@@ -531,6 +551,7 @@
return -EINVAL;
}
+ flush_delayed_work_sync(&sbi->sb_work);
replace_mount_options(sb, new_opts);
sbi->s_flags = mount_flags;
@@ -549,10 +570,9 @@
if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY))
return 0;
- if (*flags & MS_RDONLY) {
- affs_write_super(sb);
+ if (*flags & MS_RDONLY)
affs_free_bitmap(sb);
- } else
+ else
res = affs_init_bitmap(sb, flags);
return res;
diff --git a/fs/afs/dir.c b/fs/afs/dir.c
index e22dc4b..db47790 100644
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -20,16 +20,16 @@
#include "internal.h"
static struct dentry *afs_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd);
+ unsigned int flags);
static int afs_dir_open(struct inode *inode, struct file *file);
static int afs_readdir(struct file *file, void *dirent, filldir_t filldir);
-static int afs_d_revalidate(struct dentry *dentry, struct nameidata *nd);
+static int afs_d_revalidate(struct dentry *dentry, unsigned int flags);
static int afs_d_delete(const struct dentry *dentry);
static void afs_d_release(struct dentry *dentry);
static int afs_lookup_filldir(void *_cookie, const char *name, int nlen,
loff_t fpos, u64 ino, unsigned dtype);
static int afs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd);
+ bool excl);
static int afs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode);
static int afs_rmdir(struct inode *dir, struct dentry *dentry);
static int afs_unlink(struct inode *dir, struct dentry *dentry);
@@ -516,7 +516,7 @@
* look up an entry in a directory
*/
static struct dentry *afs_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct afs_vnode *vnode;
struct afs_fid fid;
@@ -598,7 +598,7 @@
* - NOTE! the hit can be a negative hit too, so we can't assume we have an
* inode
*/
-static int afs_d_revalidate(struct dentry *dentry, struct nameidata *nd)
+static int afs_d_revalidate(struct dentry *dentry, unsigned int flags)
{
struct afs_vnode *vnode, *dir;
struct afs_fid uninitialized_var(fid);
@@ -607,7 +607,7 @@
void *dir_version;
int ret;
- if (nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
vnode = AFS_FS_I(dentry->d_inode);
@@ -949,7 +949,7 @@
* create a regular file on an AFS filesystem
*/
static int afs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
struct afs_file_status status;
struct afs_callback cb;
diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c
index 298cf89..9682c33 100644
--- a/fs/afs/mntpt.c
+++ b/fs/afs/mntpt.c
@@ -22,7 +22,7 @@
static struct dentry *afs_mntpt_lookup(struct inode *dir,
struct dentry *dentry,
- struct nameidata *nd);
+ unsigned int flags);
static int afs_mntpt_open(struct inode *inode, struct file *file);
static void afs_mntpt_expiry_timed_out(struct work_struct *work);
@@ -104,7 +104,7 @@
*/
static struct dentry *afs_mntpt_lookup(struct inode *dir,
struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
_enter("%p,%p{%p{%s},%s}",
dir,
diff --git a/fs/afs/super.c b/fs/afs/super.c
index f02b31e..df8c604 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -395,7 +395,7 @@
as->volume = vol;
/* allocate a deviceless superblock */
- sb = sget(fs_type, afs_test_super, afs_set_super, as);
+ sb = sget(fs_type, afs_test_super, afs_set_super, flags, as);
if (IS_ERR(sb)) {
ret = PTR_ERR(sb);
afs_put_volume(vol);
@@ -406,7 +406,6 @@
if (!sb->s_root) {
/* initial superblock/root creation */
_debug("create");
- sb->s_flags = flags;
ret = afs_fill_super(sb, ¶ms);
if (ret < 0) {
deactivate_locked_super(sb);
diff --git a/fs/aio.c b/fs/aio.c
index 55c4c76..71f613c 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -56,13 +56,6 @@
static struct workqueue_struct *aio_wq;
-/* Used for rare fput completion. */
-static void aio_fput_routine(struct work_struct *);
-static DECLARE_WORK(fput_work, aio_fput_routine);
-
-static DEFINE_SPINLOCK(fput_lock);
-static LIST_HEAD(fput_head);
-
static void aio_kick_handler(struct work_struct *);
static void aio_queue_work(struct kioctx *);
@@ -479,7 +472,6 @@
{
unsigned short allocated, to_alloc;
long avail;
- bool called_fput = false;
struct kiocb *req, *n;
struct aio_ring *ring;
@@ -495,28 +487,11 @@
if (allocated == 0)
goto out;
-retry:
spin_lock_irq(&ctx->ctx_lock);
ring = kmap_atomic(ctx->ring_info.ring_pages[0]);
avail = aio_ring_avail(&ctx->ring_info, ring) - ctx->reqs_active;
BUG_ON(avail < 0);
- if (avail == 0 && !called_fput) {
- /*
- * Handle a potential starvation case. It is possible that
- * we hold the last reference on a struct file, causing us
- * to delay the final fput to non-irq context. In this case,
- * ctx->reqs_active is artificially high. Calling the fput
- * routine here may free up a slot in the event completion
- * ring, allowing this allocation to succeed.
- */
- kunmap_atomic(ring);
- spin_unlock_irq(&ctx->ctx_lock);
- aio_fput_routine(NULL);
- called_fput = true;
- goto retry;
- }
-
if (avail < allocated) {
/* Trim back the number of requests. */
list_for_each_entry_safe(req, n, &batch->head, ki_batch) {
@@ -570,36 +545,6 @@
wake_up_all(&ctx->wait);
}
-static void aio_fput_routine(struct work_struct *data)
-{
- spin_lock_irq(&fput_lock);
- while (likely(!list_empty(&fput_head))) {
- struct kiocb *req = list_kiocb(fput_head.next);
- struct kioctx *ctx = req->ki_ctx;
-
- list_del(&req->ki_list);
- spin_unlock_irq(&fput_lock);
-
- /* Complete the fput(s) */
- if (req->ki_filp != NULL)
- fput(req->ki_filp);
-
- /* Link the iocb into the context's free list */
- rcu_read_lock();
- spin_lock_irq(&ctx->ctx_lock);
- really_put_req(ctx, req);
- /*
- * at that point ctx might've been killed, but actual
- * freeing is RCU'd
- */
- spin_unlock_irq(&ctx->ctx_lock);
- rcu_read_unlock();
-
- spin_lock_irq(&fput_lock);
- }
- spin_unlock_irq(&fput_lock);
-}
-
/* __aio_put_req
* Returns true if this put was the last user of the request.
*/
@@ -618,21 +563,9 @@
req->ki_cancel = NULL;
req->ki_retry = NULL;
- /*
- * Try to optimize the aio and eventfd file* puts, by avoiding to
- * schedule work in case it is not final fput() time. In normal cases,
- * we would not be holding the last reference to the file*, so
- * this function will be executed w/out any aio kthread wakeup.
- */
- if (unlikely(!fput_atomic(req->ki_filp))) {
- spin_lock(&fput_lock);
- list_add(&req->ki_list, &fput_head);
- spin_unlock(&fput_lock);
- schedule_work(&fput_work);
- } else {
- req->ki_filp = NULL;
- really_put_req(ctx, req);
- }
+ fput(req->ki_filp);
+ req->ki_filp = NULL;
+ really_put_req(ctx, req);
return 1;
}
diff --git a/fs/attr.c b/fs/attr.c
index 0da9095..29e38a1 100644
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -171,6 +171,8 @@
struct timespec now;
unsigned int ia_valid = attr->ia_valid;
+ WARN_ON_ONCE(!mutex_is_locked(&inode->i_mutex));
+
if (ia_valid & (ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_TIMES_SET)) {
if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
return -EPERM;
@@ -250,5 +252,4 @@
return error;
}
-
EXPORT_SYMBOL(notify_change);
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index aa9103f..abf645c 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -257,8 +257,8 @@
* corresponding to the autofs fs we want to open.
*/
- filp = dentry_open(path.dentry, path.mnt, O_RDONLY,
- current_cred());
+ filp = dentry_open(&path, O_RDONLY, current_cred());
+ path_put(&path);
if (IS_ERR(filp)) {
err = PTR_ERR(filp);
goto out;
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index 75e5f1c..e7396cf 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -32,7 +32,7 @@
static long autofs4_root_compat_ioctl(struct file *,unsigned int,unsigned long);
#endif
static int autofs4_dir_open(struct inode *inode, struct file *file);
-static struct dentry *autofs4_lookup(struct inode *,struct dentry *, struct nameidata *);
+static struct dentry *autofs4_lookup(struct inode *,struct dentry *, unsigned int);
static struct vfsmount *autofs4_d_automount(struct path *);
static int autofs4_d_manage(struct dentry *, bool);
static void autofs4_dentry_release(struct dentry *);
@@ -458,7 +458,7 @@
}
/* Lookups in the root directory */
-static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
+static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
{
struct autofs_sb_info *sbi;
struct autofs_info *ino;
diff --git a/fs/bad_inode.c b/fs/bad_inode.c
index 1b35d6b..b1342ff 100644
--- a/fs/bad_inode.c
+++ b/fs/bad_inode.c
@@ -173,13 +173,13 @@
};
static int bad_inode_create (struct inode *dir, struct dentry *dentry,
- umode_t mode, struct nameidata *nd)
+ umode_t mode, bool excl)
{
return -EIO;
}
static struct dentry *bad_inode_lookup(struct inode *dir,
- struct dentry *dentry, struct nameidata *nd)
+ struct dentry *dentry, unsigned int flags)
{
return ERR_PTR(-EIO);
}
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index e18da23..cf7f3c6 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -34,7 +34,7 @@
static int befs_get_block(struct inode *, sector_t, struct buffer_head *, int);
static int befs_readpage(struct file *file, struct page *page);
static sector_t befs_bmap(struct address_space *mapping, sector_t block);
-static struct dentry *befs_lookup(struct inode *, struct dentry *, struct nameidata *);
+static struct dentry *befs_lookup(struct inode *, struct dentry *, unsigned int);
static struct inode *befs_iget(struct super_block *, unsigned long);
static struct inode *befs_alloc_inode(struct super_block *sb);
static void befs_destroy_inode(struct inode *inode);
@@ -159,7 +159,7 @@
}
static struct dentry *
-befs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
+befs_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
{
struct inode *inode = NULL;
struct super_block *sb = dir->i_sb;
diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c
index d12c796..2785ef9 100644
--- a/fs/bfs/dir.c
+++ b/fs/bfs/dir.c
@@ -85,7 +85,7 @@
extern void dump_imap(const char *, struct super_block *);
static int bfs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
int err;
struct inode *inode;
@@ -133,7 +133,7 @@
}
static struct dentry *bfs_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct inode *inode = NULL;
struct buffer_head *bh;
diff --git a/fs/block_dev.c b/fs/block_dev.c
index c2bbe1f..1e51919 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1710,3 +1710,39 @@
return res;
}
EXPORT_SYMBOL(__invalidate_device);
+
+void iterate_bdevs(void (*func)(struct block_device *, void *), void *arg)
+{
+ struct inode *inode, *old_inode = NULL;
+
+ spin_lock(&inode_sb_list_lock);
+ list_for_each_entry(inode, &blockdev_superblock->s_inodes, i_sb_list) {
+ struct address_space *mapping = inode->i_mapping;
+
+ spin_lock(&inode->i_lock);
+ if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW) ||
+ mapping->nrpages == 0) {
+ spin_unlock(&inode->i_lock);
+ continue;
+ }
+ __iget(inode);
+ spin_unlock(&inode->i_lock);
+ spin_unlock(&inode_sb_list_lock);
+ /*
+ * We hold a reference to 'inode' so it couldn't have been
+ * removed from s_inodes list while we dropped the
+ * inode_sb_list_lock. We cannot iput the inode now as we can
+ * be holding the last reference and we cannot iput it under
+ * inode_sb_list_lock. So we keep the reference and iput it
+ * later.
+ */
+ iput(old_inode);
+ old_inode = inode;
+
+ func(I_BDEV(inode), arg);
+
+ spin_lock(&inode_sb_list_lock);
+ }
+ spin_unlock(&inode_sb_list_lock);
+ iput(old_inode);
+}
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index 3f75895..a383c18 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -179,60 +179,74 @@
static int add_all_parents(struct btrfs_root *root, struct btrfs_path *path,
struct ulist *parents, int level,
- struct btrfs_key *key, u64 wanted_disk_byte,
+ struct btrfs_key *key_for_search, u64 time_seq,
+ u64 wanted_disk_byte,
const u64 *extent_item_pos)
{
- int ret;
- int slot = path->slots[level];
- struct extent_buffer *eb = path->nodes[level];
+ int ret = 0;
+ int slot;
+ struct extent_buffer *eb;
+ struct btrfs_key key;
struct btrfs_file_extent_item *fi;
struct extent_inode_elem *eie = NULL;
u64 disk_byte;
- u64 wanted_objectid = key->objectid;
-add_parent:
- if (level == 0 && extent_item_pos) {
- fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
- ret = check_extent_in_eb(key, eb, fi, *extent_item_pos, &eie);
+ if (level != 0) {
+ eb = path->nodes[level];
+ ret = ulist_add(parents, eb->start, 0, GFP_NOFS);
if (ret < 0)
return ret;
- }
- ret = ulist_add(parents, eb->start, (unsigned long)eie, GFP_NOFS);
- if (ret < 0)
- return ret;
-
- if (level != 0)
return 0;
+ }
/*
- * if the current leaf is full with EXTENT_DATA items, we must
- * check the next one if that holds a reference as well.
- * ref->count cannot be used to skip this check.
- * repeat this until we don't find any additional EXTENT_DATA items.
+ * We normally enter this function with the path already pointing to
+ * the first item to check. But sometimes, we may enter it with
+ * slot==nritems. In that case, go to the next leaf before we continue.
*/
- while (1) {
- eie = NULL;
- ret = btrfs_next_leaf(root, path);
- if (ret < 0)
- return ret;
- if (ret)
- return 0;
+ if (path->slots[0] >= btrfs_header_nritems(path->nodes[0]))
+ ret = btrfs_next_old_leaf(root, path, time_seq);
+ while (!ret) {
eb = path->nodes[0];
- for (slot = 0; slot < btrfs_header_nritems(eb); ++slot) {
- btrfs_item_key_to_cpu(eb, key, slot);
- if (key->objectid != wanted_objectid ||
- key->type != BTRFS_EXTENT_DATA_KEY)
- return 0;
- fi = btrfs_item_ptr(eb, slot,
- struct btrfs_file_extent_item);
- disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
- if (disk_byte == wanted_disk_byte)
- goto add_parent;
+ slot = path->slots[0];
+
+ btrfs_item_key_to_cpu(eb, &key, slot);
+
+ if (key.objectid != key_for_search->objectid ||
+ key.type != BTRFS_EXTENT_DATA_KEY)
+ break;
+
+ fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
+ disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
+
+ if (disk_byte == wanted_disk_byte) {
+ eie = NULL;
+ if (extent_item_pos) {
+ ret = check_extent_in_eb(&key, eb, fi,
+ *extent_item_pos,
+ &eie);
+ if (ret < 0)
+ break;
+ }
+ if (!ret) {
+ ret = ulist_add(parents, eb->start,
+ (unsigned long)eie, GFP_NOFS);
+ if (ret < 0)
+ break;
+ if (!extent_item_pos) {
+ ret = btrfs_next_old_leaf(root, path,
+ time_seq);
+ continue;
+ }
+ }
}
+ ret = btrfs_next_old_item(root, path, time_seq);
}
- return 0;
+ if (ret > 0)
+ ret = 0;
+ return ret;
}
/*
@@ -249,7 +263,6 @@
struct btrfs_path *path;
struct btrfs_root *root;
struct btrfs_key root_key;
- struct btrfs_key key = {0};
struct extent_buffer *eb;
int ret = 0;
int root_level;
@@ -288,25 +301,19 @@
goto out;
eb = path->nodes[level];
- if (!eb) {
- WARN_ON(1);
- ret = 1;
- goto out;
- }
-
- if (level == 0) {
- if (ret == 1 && path->slots[0] >= btrfs_header_nritems(eb)) {
- ret = btrfs_next_leaf(root, path);
- if (ret)
- goto out;
- eb = path->nodes[0];
+ while (!eb) {
+ if (!level) {
+ WARN_ON(1);
+ ret = 1;
+ goto out;
}
-
- btrfs_item_key_to_cpu(eb, &key, path->slots[0]);
+ level--;
+ eb = path->nodes[level];
}
- ret = add_all_parents(root, path, parents, level, &key,
- ref->wanted_disk_byte, extent_item_pos);
+ ret = add_all_parents(root, path, parents, level, &ref->key_for_search,
+ time_seq, ref->wanted_disk_byte,
+ extent_item_pos);
out:
btrfs_free_path(path);
return ret;
@@ -832,6 +839,7 @@
}
ret = __add_delayed_refs(head, delayed_ref_seq,
&prefs_delayed);
+ mutex_unlock(&head->mutex);
if (ret) {
spin_unlock(&delayed_refs->lock);
goto out;
@@ -925,8 +933,6 @@
}
out:
- if (head)
- mutex_unlock(&head->mutex);
btrfs_free_path(path);
while (!list_empty(&prefs)) {
ref = list_first_entry(&prefs, struct __prelim_ref, list);
diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h
index e616f887..12394a9 100644
--- a/fs/btrfs/btrfs_inode.h
+++ b/fs/btrfs/btrfs_inode.h
@@ -37,6 +37,7 @@
#define BTRFS_INODE_IN_DEFRAG 3
#define BTRFS_INODE_DELALLOC_META_RESERVED 4
#define BTRFS_INODE_HAS_ORPHAN_ITEM 5
+#define BTRFS_INODE_HAS_ASYNC_EXTENT 6
/* in memory btrfs inode */
struct btrfs_inode {
diff --git a/fs/btrfs/check-integrity.c b/fs/btrfs/check-integrity.c
index 9cebb1f..da6e936 100644
--- a/fs/btrfs/check-integrity.c
+++ b/fs/btrfs/check-integrity.c
@@ -93,6 +93,7 @@
#include "print-tree.h"
#include "locking.h"
#include "check-integrity.h"
+#include "rcu-string.h"
#define BTRFSIC_BLOCK_HASHTABLE_SIZE 0x10000
#define BTRFSIC_BLOCK_LINK_HASHTABLE_SIZE 0x10000
@@ -843,13 +844,14 @@
superblock_tmp->never_written = 0;
superblock_tmp->mirror_num = 1 + superblock_mirror_num;
if (state->print_mask & BTRFSIC_PRINT_MASK_SUPERBLOCK_WRITE)
- printk(KERN_INFO "New initial S-block (bdev %p, %s)"
- " @%llu (%s/%llu/%d)\n",
- superblock_bdev, device->name,
- (unsigned long long)dev_bytenr,
- dev_state->name,
- (unsigned long long)dev_bytenr,
- superblock_mirror_num);
+ printk_in_rcu(KERN_INFO "New initial S-block (bdev %p, %s)"
+ " @%llu (%s/%llu/%d)\n",
+ superblock_bdev,
+ rcu_str_deref(device->name),
+ (unsigned long long)dev_bytenr,
+ dev_state->name,
+ (unsigned long long)dev_bytenr,
+ superblock_mirror_num);
list_add(&superblock_tmp->all_blocks_node,
&state->all_blocks_list);
btrfsic_block_hashtable_add(superblock_tmp,
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index d7a96cf..8206b39 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -467,6 +467,15 @@
return 0;
}
+/*
+ * This allocates memory and gets a tree modification sequence number when
+ * needed.
+ *
+ * Returns 0 when no sequence number is needed, < 0 on error.
+ * Returns 1 when a sequence number was added. In this case,
+ * fs_info->tree_mod_seq_lock was acquired and must be released by the caller
+ * after inserting into the rb tree.
+ */
static inline int tree_mod_alloc(struct btrfs_fs_info *fs_info, gfp_t flags,
struct tree_mod_elem **tm_ret)
{
@@ -491,11 +500,11 @@
*/
kfree(tm);
seq = 0;
+ spin_unlock(&fs_info->tree_mod_seq_lock);
} else {
__get_tree_mod_seq(fs_info, &tm->elem);
seq = tm->elem.seq;
}
- spin_unlock(&fs_info->tree_mod_seq_lock);
return seq;
}
@@ -521,7 +530,9 @@
tm->slot = slot;
tm->generation = btrfs_node_ptr_generation(eb, slot);
- return __tree_mod_log_insert(fs_info, tm);
+ ret = __tree_mod_log_insert(fs_info, tm);
+ spin_unlock(&fs_info->tree_mod_seq_lock);
+ return ret;
}
static noinline int
@@ -559,7 +570,9 @@
tm->move.nr_items = nr_items;
tm->op = MOD_LOG_MOVE_KEYS;
- return __tree_mod_log_insert(fs_info, tm);
+ ret = __tree_mod_log_insert(fs_info, tm);
+ spin_unlock(&fs_info->tree_mod_seq_lock);
+ return ret;
}
static noinline int
@@ -580,7 +593,9 @@
tm->generation = btrfs_header_generation(old_root);
tm->op = MOD_LOG_ROOT_REPLACE;
- return __tree_mod_log_insert(fs_info, tm);
+ ret = __tree_mod_log_insert(fs_info, tm);
+ spin_unlock(&fs_info->tree_mod_seq_lock);
+ return ret;
}
static struct tree_mod_elem *
@@ -1009,11 +1024,18 @@
if (!looped && !tm)
return 0;
/*
- * we must have key remove operations in the log before the
- * replace operation.
+ * if there are no tree operation for the oldest root, we simply
+ * return it. this should only happen if that (old) root is at
+ * level 0.
*/
- BUG_ON(!tm);
+ if (!tm)
+ break;
+ /*
+ * if there's an operation that's not a root replacement, we
+ * found the oldest version of our root. normally, we'll find a
+ * MOD_LOG_KEY_REMOVE_WHILE_FREEING operation here.
+ */
if (tm->op != MOD_LOG_ROOT_REPLACE)
break;
@@ -1023,6 +1045,10 @@
looped = 1;
}
+ /* if there's no old root to return, return what we found instead */
+ if (!found)
+ found = tm;
+
return found;
}
@@ -1068,11 +1094,7 @@
tm->generation);
break;
case MOD_LOG_KEY_ADD:
- if (tm->slot != n - 1) {
- o_dst = btrfs_node_key_ptr_offset(tm->slot);
- o_src = btrfs_node_key_ptr_offset(tm->slot + 1);
- memmove_extent_buffer(eb, o_dst, o_src, p_size);
- }
+ /* if a move operation is needed it's in the log */
n--;
break;
case MOD_LOG_MOVE_KEYS:
@@ -1143,45 +1165,57 @@
return eb_rewin;
}
+/*
+ * get_old_root() rewinds the state of @root's root node to the given @time_seq
+ * value. If there are no changes, the current root->root_node is returned. If
+ * anything changed in between, there's a fresh buffer allocated on which the
+ * rewind operations are done. In any case, the returned buffer is read locked.
+ * Returns NULL on error (with no locks held).
+ */
static inline struct extent_buffer *
get_old_root(struct btrfs_root *root, u64 time_seq)
{
struct tree_mod_elem *tm;
struct extent_buffer *eb;
- struct tree_mod_root *old_root;
- u64 old_generation;
+ struct tree_mod_root *old_root = NULL;
+ u64 old_generation = 0;
+ u64 logical;
+ eb = btrfs_read_lock_root_node(root);
tm = __tree_mod_log_oldest_root(root->fs_info, root, time_seq);
if (!tm)
return root->node;
- old_root = &tm->old_root;
- old_generation = tm->generation;
-
- tm = tree_mod_log_search(root->fs_info, old_root->logical, time_seq);
- /*
- * there was an item in the log when __tree_mod_log_oldest_root
- * returned. this one must not go away, because the time_seq passed to
- * us must be blocking its removal.
- */
- BUG_ON(!tm);
-
- if (old_root->logical == root->node->start) {
- /* there are logged operations for the current root */
- eb = btrfs_clone_extent_buffer(root->node);
+ if (tm->op == MOD_LOG_ROOT_REPLACE) {
+ old_root = &tm->old_root;
+ old_generation = tm->generation;
+ logical = old_root->logical;
} else {
- /* there's a root replace operation for the current root */
- eb = alloc_dummy_extent_buffer(tm->index << PAGE_CACHE_SHIFT,
- root->nodesize);
+ logical = root->node->start;
+ }
+
+ tm = tree_mod_log_search(root->fs_info, logical, time_seq);
+ if (old_root)
+ eb = alloc_dummy_extent_buffer(logical, root->nodesize);
+ else
+ eb = btrfs_clone_extent_buffer(root->node);
+ btrfs_tree_read_unlock(root->node);
+ free_extent_buffer(root->node);
+ if (!eb)
+ return NULL;
+ btrfs_tree_read_lock(eb);
+ if (old_root) {
btrfs_set_header_bytenr(eb, eb->start);
btrfs_set_header_backref_rev(eb, BTRFS_MIXED_BACKREF_REV);
btrfs_set_header_owner(eb, root->root_key.objectid);
+ btrfs_set_header_level(eb, old_root->level);
+ btrfs_set_header_generation(eb, old_generation);
}
- if (!eb)
- return NULL;
- btrfs_set_header_level(eb, old_root->level);
- btrfs_set_header_generation(eb, old_generation);
- __tree_mod_log_rewind(eb, time_seq, tm);
+ if (tm)
+ __tree_mod_log_rewind(eb, time_seq, tm);
+ else
+ WARN_ON(btrfs_header_level(eb) != 0);
+ extent_buffer_get(eb);
return eb;
}
@@ -1650,8 +1684,6 @@
BTRFS_NODEPTRS_PER_BLOCK(root) / 4)
return 0;
- btrfs_header_nritems(mid);
-
left = read_node_slot(root, parent, pslot - 1);
if (left) {
btrfs_tree_lock(left);
@@ -1681,7 +1713,6 @@
wret = push_node_left(trans, root, left, mid, 1);
if (wret < 0)
ret = wret;
- btrfs_header_nritems(mid);
}
/*
@@ -2615,9 +2646,7 @@
again:
b = get_old_root(root, time_seq);
- extent_buffer_get(b);
level = btrfs_header_level(b);
- btrfs_tree_read_lock(b);
p->locks[level] = BTRFS_READ_LOCK;
while (b) {
@@ -2964,7 +2993,7 @@
static void insert_ptr(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct btrfs_path *path,
struct btrfs_disk_key *key, u64 bytenr,
- int slot, int level, int tree_mod_log)
+ int slot, int level)
{
struct extent_buffer *lower;
int nritems;
@@ -2977,7 +3006,7 @@
BUG_ON(slot > nritems);
BUG_ON(nritems == BTRFS_NODEPTRS_PER_BLOCK(root));
if (slot != nritems) {
- if (tree_mod_log && level)
+ if (level)
tree_mod_log_eb_move(root->fs_info, lower, slot + 1,
slot, nritems - slot);
memmove_extent_buffer(lower,
@@ -2985,7 +3014,7 @@
btrfs_node_key_ptr_offset(slot),
(nritems - slot) * sizeof(struct btrfs_key_ptr));
}
- if (tree_mod_log && level) {
+ if (level) {
ret = tree_mod_log_insert_key(root->fs_info, lower, slot,
MOD_LOG_KEY_ADD);
BUG_ON(ret < 0);
@@ -3073,7 +3102,7 @@
btrfs_mark_buffer_dirty(split);
insert_ptr(trans, root, path, &disk_key, split->start,
- path->slots[level + 1] + 1, level + 1, 1);
+ path->slots[level + 1] + 1, level + 1);
if (path->slots[level] >= mid) {
path->slots[level] -= mid;
@@ -3610,7 +3639,7 @@
btrfs_set_header_nritems(l, mid);
btrfs_item_key(right, &disk_key, 0);
insert_ptr(trans, root, path, &disk_key, right->start,
- path->slots[1] + 1, 1, 0);
+ path->slots[1] + 1, 1);
btrfs_mark_buffer_dirty(right);
btrfs_mark_buffer_dirty(l);
@@ -3817,7 +3846,7 @@
if (mid <= slot) {
btrfs_set_header_nritems(right, 0);
insert_ptr(trans, root, path, &disk_key, right->start,
- path->slots[1] + 1, 1, 0);
+ path->slots[1] + 1, 1);
btrfs_tree_unlock(path->nodes[0]);
free_extent_buffer(path->nodes[0]);
path->nodes[0] = right;
@@ -3826,7 +3855,7 @@
} else {
btrfs_set_header_nritems(right, 0);
insert_ptr(trans, root, path, &disk_key, right->start,
- path->slots[1], 1, 0);
+ path->slots[1], 1);
btrfs_tree_unlock(path->nodes[0]);
free_extent_buffer(path->nodes[0]);
path->nodes[0] = right;
@@ -5001,6 +5030,12 @@
*/
int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path)
{
+ return btrfs_next_old_leaf(root, path, 0);
+}
+
+int btrfs_next_old_leaf(struct btrfs_root *root, struct btrfs_path *path,
+ u64 time_seq)
+{
int slot;
int level;
struct extent_buffer *c;
@@ -5025,7 +5060,10 @@
path->keep_locks = 1;
path->leave_spinning = 1;
- ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+ if (time_seq)
+ ret = btrfs_search_old_slot(root, &key, path, time_seq);
+ else
+ ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
path->keep_locks = 0;
if (ret < 0)
@@ -5081,6 +5119,18 @@
if (!path->skip_locking) {
ret = btrfs_try_tree_read_lock(next);
+ if (!ret && time_seq) {
+ /*
+ * If we don't get the lock, we may be racing
+ * with push_leaf_left, holding that lock while
+ * itself waiting for the leaf we've currently
+ * locked. To solve this situation, we give up
+ * on our lock and cycle.
+ */
+ btrfs_release_path(path);
+ cond_resched();
+ goto again;
+ }
if (!ret) {
btrfs_set_path_blocking(path);
btrfs_tree_read_lock(next);
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 0236d03..fa5c45b 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -2753,13 +2753,20 @@
}
int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path);
-static inline int btrfs_next_item(struct btrfs_root *root, struct btrfs_path *p)
+int btrfs_next_old_leaf(struct btrfs_root *root, struct btrfs_path *path,
+ u64 time_seq);
+static inline int btrfs_next_old_item(struct btrfs_root *root,
+ struct btrfs_path *p, u64 time_seq)
{
++p->slots[0];
if (p->slots[0] >= btrfs_header_nritems(p->nodes[0]))
- return btrfs_next_leaf(root, p);
+ return btrfs_next_old_leaf(root, p, time_seq);
return 0;
}
+static inline int btrfs_next_item(struct btrfs_root *root, struct btrfs_path *p)
+{
+ return btrfs_next_old_item(root, p, 0);
+}
int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path);
int btrfs_leaf_free_space(struct btrfs_root *root, struct extent_buffer *leaf);
int __must_check btrfs_drop_snapshot(struct btrfs_root *root,
diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c
index c18d044..2399f40 100644
--- a/fs/btrfs/delayed-inode.c
+++ b/fs/btrfs/delayed-inode.c
@@ -1879,3 +1879,21 @@
}
}
}
+
+void btrfs_destroy_delayed_inodes(struct btrfs_root *root)
+{
+ struct btrfs_delayed_root *delayed_root;
+ struct btrfs_delayed_node *curr_node, *prev_node;
+
+ delayed_root = btrfs_get_delayed_root(root);
+
+ curr_node = btrfs_first_delayed_node(delayed_root);
+ while (curr_node) {
+ __btrfs_kill_delayed_node(curr_node);
+
+ prev_node = curr_node;
+ curr_node = btrfs_next_delayed_node(curr_node);
+ btrfs_release_delayed_node(prev_node);
+ }
+}
+
diff --git a/fs/btrfs/delayed-inode.h b/fs/btrfs/delayed-inode.h
index 7083d08..f5aa402 100644
--- a/fs/btrfs/delayed-inode.h
+++ b/fs/btrfs/delayed-inode.h
@@ -124,6 +124,9 @@
/* Used for drop dead root */
void btrfs_kill_all_delayed_nodes(struct btrfs_root *root);
+/* Used for clean the transaction */
+void btrfs_destroy_delayed_inodes(struct btrfs_root *root);
+
/* Used for readdir() */
void btrfs_get_delayed_items(struct inode *inode, struct list_head *ins_list,
struct list_head *del_list);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 7ae51de..2936ca4 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -44,6 +44,7 @@
#include "free-space-cache.h"
#include "inode-map.h"
#include "check-integrity.h"
+#include "rcu-string.h"
static struct extent_io_ops btree_extent_io_ops;
static void end_workqueue_fn(struct btrfs_work *work);
@@ -2118,7 +2119,7 @@
features = btrfs_super_incompat_flags(disk_super);
features |= BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF;
- if (tree_root->fs_info->compress_type & BTRFS_COMPRESS_LZO)
+ if (tree_root->fs_info->compress_type == BTRFS_COMPRESS_LZO)
features |= BTRFS_FEATURE_INCOMPAT_COMPRESS_LZO;
/*
@@ -2353,12 +2354,17 @@
BTRFS_CSUM_TREE_OBJECTID, csum_root);
if (ret)
goto recovery_tree_root;
-
csum_root->track_dirty = 1;
fs_info->generation = generation;
fs_info->last_trans_committed = generation;
+ ret = btrfs_recover_balance(fs_info);
+ if (ret) {
+ printk(KERN_WARNING "btrfs: failed to recover balance\n");
+ goto fail_block_groups;
+ }
+
ret = btrfs_init_dev_stats(fs_info);
if (ret) {
printk(KERN_ERR "btrfs: failed to init dev_stats: %d\n",
@@ -2484,20 +2490,23 @@
goto fail_trans_kthread;
}
- if (!(sb->s_flags & MS_RDONLY)) {
- down_read(&fs_info->cleanup_work_sem);
- err = btrfs_orphan_cleanup(fs_info->fs_root);
- if (!err)
- err = btrfs_orphan_cleanup(fs_info->tree_root);
+ if (sb->s_flags & MS_RDONLY)
+ return 0;
+
+ down_read(&fs_info->cleanup_work_sem);
+ if ((ret = btrfs_orphan_cleanup(fs_info->fs_root)) ||
+ (ret = btrfs_orphan_cleanup(fs_info->tree_root))) {
up_read(&fs_info->cleanup_work_sem);
+ close_ctree(tree_root);
+ return ret;
+ }
+ up_read(&fs_info->cleanup_work_sem);
- if (!err)
- err = btrfs_recover_balance(fs_info->tree_root);
-
- if (err) {
- close_ctree(tree_root);
- return err;
- }
+ ret = btrfs_resume_balance_async(fs_info);
+ if (ret) {
+ printk(KERN_WARNING "btrfs: failed to resume balance\n");
+ close_ctree(tree_root);
+ return ret;
}
return 0;
@@ -2575,8 +2584,9 @@
struct btrfs_device *device = (struct btrfs_device *)
bh->b_private;
- printk_ratelimited(KERN_WARNING "lost page write due to "
- "I/O error on %s\n", device->name);
+ printk_ratelimited_in_rcu(KERN_WARNING "lost page write due to "
+ "I/O error on %s\n",
+ rcu_str_deref(device->name));
/* note, we dont' set_buffer_write_io_error because we have
* our own ways of dealing with the IO errors
*/
@@ -2749,8 +2759,8 @@
wait_for_completion(&device->flush_wait);
if (bio_flagged(bio, BIO_EOPNOTSUPP)) {
- printk("btrfs: disabling barriers on dev %s\n",
- device->name);
+ printk_in_rcu("btrfs: disabling barriers on dev %s\n",
+ rcu_str_deref(device->name));
device->nobarriers = 1;
}
if (!bio_flagged(bio, BIO_UPTODATE)) {
@@ -3400,7 +3410,6 @@
delayed_refs = &trans->delayed_refs;
-again:
spin_lock(&delayed_refs->lock);
if (delayed_refs->num_entries == 0) {
spin_unlock(&delayed_refs->lock);
@@ -3408,31 +3417,37 @@
return ret;
}
- node = rb_first(&delayed_refs->root);
- while (node) {
+ while ((node = rb_first(&delayed_refs->root)) != NULL) {
ref = rb_entry(node, struct btrfs_delayed_ref_node, rb_node);
- node = rb_next(node);
-
- ref->in_tree = 0;
- rb_erase(&ref->rb_node, &delayed_refs->root);
- delayed_refs->num_entries--;
atomic_set(&ref->refs, 1);
if (btrfs_delayed_ref_is_head(ref)) {
struct btrfs_delayed_ref_head *head;
head = btrfs_delayed_node_to_head(ref);
- spin_unlock(&delayed_refs->lock);
- mutex_lock(&head->mutex);
+ if (!mutex_trylock(&head->mutex)) {
+ atomic_inc(&ref->refs);
+ spin_unlock(&delayed_refs->lock);
+
+ /* Need to wait for the delayed ref to run */
+ mutex_lock(&head->mutex);
+ mutex_unlock(&head->mutex);
+ btrfs_put_delayed_ref(ref);
+
+ spin_lock(&delayed_refs->lock);
+ continue;
+ }
+
kfree(head->extent_op);
delayed_refs->num_heads--;
if (list_empty(&head->cluster))
delayed_refs->num_heads_ready--;
list_del_init(&head->cluster);
- mutex_unlock(&head->mutex);
- btrfs_put_delayed_ref(ref);
- goto again;
}
+ ref->in_tree = 0;
+ rb_erase(&ref->rb_node, &delayed_refs->root);
+ delayed_refs->num_entries--;
+
spin_unlock(&delayed_refs->lock);
btrfs_put_delayed_ref(ref);
@@ -3520,11 +3535,9 @@
&(&BTRFS_I(page->mapping->host)->io_tree)->buffer,
offset >> PAGE_CACHE_SHIFT);
spin_unlock(&dirty_pages->buffer_lock);
- if (eb) {
+ if (eb)
ret = test_and_clear_bit(EXTENT_BUFFER_DIRTY,
&eb->bflags);
- atomic_set(&eb->refs, 1);
- }
if (PageWriteback(page))
end_page_writeback(page);
@@ -3538,8 +3551,8 @@
spin_unlock_irq(&page->mapping->tree_lock);
}
- page->mapping->a_ops->invalidatepage(page, 0);
unlock_page(page);
+ page_cache_release(page);
}
}
@@ -3553,8 +3566,10 @@
u64 start;
u64 end;
int ret;
+ bool loop = true;
unpin = pinned_extents;
+again:
while (1) {
ret = find_first_extent_bit(unpin, 0, &start, &end,
EXTENT_DIRTY);
@@ -3572,6 +3587,15 @@
cond_resched();
}
+ if (loop) {
+ if (unpin == &root->fs_info->freed_extents[0])
+ unpin = &root->fs_info->freed_extents[1];
+ else
+ unpin = &root->fs_info->freed_extents[0];
+ loop = false;
+ goto again;
+ }
+
return 0;
}
@@ -3585,21 +3609,23 @@
/* FIXME: cleanup wait for commit */
cur_trans->in_commit = 1;
cur_trans->blocked = 1;
- if (waitqueue_active(&root->fs_info->transaction_blocked_wait))
- wake_up(&root->fs_info->transaction_blocked_wait);
+ wake_up(&root->fs_info->transaction_blocked_wait);
cur_trans->blocked = 0;
- if (waitqueue_active(&root->fs_info->transaction_wait))
- wake_up(&root->fs_info->transaction_wait);
+ wake_up(&root->fs_info->transaction_wait);
cur_trans->commit_done = 1;
- if (waitqueue_active(&cur_trans->commit_wait))
- wake_up(&cur_trans->commit_wait);
+ wake_up(&cur_trans->commit_wait);
+
+ btrfs_destroy_delayed_inodes(root);
+ btrfs_assert_delayed_root_empty(root);
btrfs_destroy_pending_snapshots(cur_trans);
btrfs_destroy_marked_extents(root, &cur_trans->dirty_pages,
EXTENT_DIRTY);
+ btrfs_destroy_pinned_extent(root,
+ root->fs_info->pinned_extents);
/*
memset(cur_trans, 0, sizeof(*cur_trans));
@@ -3648,6 +3674,9 @@
if (waitqueue_active(&t->commit_wait))
wake_up(&t->commit_wait);
+ btrfs_destroy_delayed_inodes(root);
+ btrfs_assert_delayed_root_empty(root);
+
btrfs_destroy_pending_snapshots(t);
btrfs_destroy_delalloc_inodes(root);
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 4b5a1e1..6e1d367 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -2347,12 +2347,10 @@
return count;
}
-
static void wait_for_more_refs(struct btrfs_delayed_ref_root *delayed_refs,
- unsigned long num_refs)
+ unsigned long num_refs,
+ struct list_head *first_seq)
{
- struct list_head *first_seq = delayed_refs->seq_head.next;
-
spin_unlock(&delayed_refs->lock);
pr_debug("waiting for more refs (num %ld, first %p)\n",
num_refs, first_seq);
@@ -2381,6 +2379,7 @@
struct btrfs_delayed_ref_root *delayed_refs;
struct btrfs_delayed_ref_node *ref;
struct list_head cluster;
+ struct list_head *first_seq = NULL;
int ret;
u64 delayed_start;
int run_all = count == (unsigned long)-1;
@@ -2436,8 +2435,10 @@
*/
consider_waiting = 1;
num_refs = delayed_refs->num_entries;
+ first_seq = root->fs_info->tree_mod_seq_list.next;
} else {
- wait_for_more_refs(delayed_refs, num_refs);
+ wait_for_more_refs(delayed_refs,
+ num_refs, first_seq);
/*
* after waiting, things have changed. we
* dropped the lock and someone else might have
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 2c8f7b2..01c21b6 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -20,6 +20,7 @@
#include "volumes.h"
#include "check-integrity.h"
#include "locking.h"
+#include "rcu-string.h"
static struct kmem_cache *extent_state_cache;
static struct kmem_cache *extent_buffer_cache;
@@ -1917,9 +1918,9 @@
return -EIO;
}
- printk(KERN_INFO "btrfs read error corrected: ino %lu off %llu (dev %s "
- "sector %llu)\n", page->mapping->host->i_ino, start,
- dev->name, sector);
+ printk_in_rcu(KERN_INFO "btrfs read error corrected: ino %lu off %llu "
+ "(dev %s sector %llu)\n", page->mapping->host->i_ino,
+ start, rcu_str_deref(dev->name), sector);
bio_put(bio);
return 0;
@@ -3323,6 +3324,7 @@
writepage_t writepage, void *data,
void (*flush_fn)(void *))
{
+ struct inode *inode = mapping->host;
int ret = 0;
int done = 0;
int nr_to_write_done = 0;
@@ -3333,6 +3335,18 @@
int scanned = 0;
int tag;
+ /*
+ * We have to hold onto the inode so that ordered extents can do their
+ * work when the IO finishes. The alternative to this is failing to add
+ * an ordered extent if the igrab() fails there and that is a huge pain
+ * to deal with, so instead just hold onto the inode throughout the
+ * writepages operation. If it fails here we are freeing up the inode
+ * anyway and we'd rather not waste our time writing out stuff that is
+ * going to be truncated anyway.
+ */
+ if (!igrab(inode))
+ return 0;
+
pagevec_init(&pvec, 0);
if (wbc->range_cyclic) {
index = mapping->writeback_index; /* Start from prev offset */
@@ -3427,6 +3441,7 @@
index = 0;
goto retry;
}
+ btrfs_add_delayed_iput(inode);
return ret;
}
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 70dc8ca..9aa01ec 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1334,7 +1334,6 @@
loff_t *ppos, size_t count, size_t ocount)
{
struct file *file = iocb->ki_filp;
- struct inode *inode = fdentry(file)->d_inode;
struct iov_iter i;
ssize_t written;
ssize_t written_buffered;
@@ -1344,18 +1343,6 @@
written = generic_file_direct_write(iocb, iov, &nr_segs, pos, ppos,
count, ocount);
- /*
- * the generic O_DIRECT will update in-memory i_size after the
- * DIOs are done. But our endio handlers that update the on
- * disk i_size never update past the in memory i_size. So we
- * need one more update here to catch any additions to the
- * file
- */
- if (inode->i_size != BTRFS_I(inode)->disk_i_size) {
- btrfs_ordered_update_i_size(inode, inode->i_size, NULL);
- mark_inode_dirty(inode);
- }
-
if (written < 0 || written == count)
return written;
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 81296c5..6c4e2ba 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -1543,29 +1543,26 @@
end = bitmap_info->offset + (u64)(BITS_PER_BITMAP * ctl->unit) - 1;
/*
- * XXX - this can go away after a few releases.
- *
- * since the only user of btrfs_remove_free_space is the tree logging
- * stuff, and the only way to test that is under crash conditions, we
- * want to have this debug stuff here just in case somethings not
- * working. Search the bitmap for the space we are trying to use to
- * make sure its actually there. If its not there then we need to stop
- * because something has gone wrong.
+ * We need to search for bits in this bitmap. We could only cover some
+ * of the extent in this bitmap thanks to how we add space, so we need
+ * to search for as much as it as we can and clear that amount, and then
+ * go searching for the next bit.
*/
search_start = *offset;
- search_bytes = *bytes;
+ search_bytes = ctl->unit;
search_bytes = min(search_bytes, end - search_start + 1);
ret = search_bitmap(ctl, bitmap_info, &search_start, &search_bytes);
BUG_ON(ret < 0 || search_start != *offset);
- if (*offset > bitmap_info->offset && *offset + *bytes > end) {
- bitmap_clear_bits(ctl, bitmap_info, *offset, end - *offset + 1);
- *bytes -= end - *offset + 1;
- *offset = end + 1;
- } else if (*offset >= bitmap_info->offset && *offset + *bytes <= end) {
- bitmap_clear_bits(ctl, bitmap_info, *offset, *bytes);
- *bytes = 0;
- }
+ /* We may have found more bits than what we need */
+ search_bytes = min(search_bytes, *bytes);
+
+ /* Cannot clear past the end of the bitmap */
+ search_bytes = min(search_bytes, end - search_start + 1);
+
+ bitmap_clear_bits(ctl, bitmap_info, search_start, search_bytes);
+ *offset += search_bytes;
+ *bytes -= search_bytes;
if (*bytes) {
struct rb_node *next = rb_next(&bitmap_info->offset_index);
@@ -1596,7 +1593,7 @@
* everything over again.
*/
search_start = *offset;
- search_bytes = *bytes;
+ search_bytes = ctl->unit;
ret = search_bitmap(ctl, bitmap_info, &search_start,
&search_bytes);
if (ret < 0 || search_start != *offset)
@@ -1879,12 +1876,14 @@
{
struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
struct btrfs_free_space *info;
- struct btrfs_free_space *next_info = NULL;
int ret = 0;
spin_lock(&ctl->tree_lock);
again:
+ if (!bytes)
+ goto out_lock;
+
info = tree_search_offset(ctl, offset, 0, 0);
if (!info) {
/*
@@ -1905,88 +1904,48 @@
}
}
- if (info->bytes < bytes && rb_next(&info->offset_index)) {
- u64 end;
- next_info = rb_entry(rb_next(&info->offset_index),
- struct btrfs_free_space,
- offset_index);
-
- if (next_info->bitmap)
- end = next_info->offset +
- BITS_PER_BITMAP * ctl->unit - 1;
- else
- end = next_info->offset + next_info->bytes;
-
- if (next_info->bytes < bytes ||
- next_info->offset > offset || offset > end) {
- printk(KERN_CRIT "Found free space at %llu, size %llu,"
- " trying to use %llu\n",
- (unsigned long long)info->offset,
- (unsigned long long)info->bytes,
- (unsigned long long)bytes);
- WARN_ON(1);
- ret = -EINVAL;
- goto out_lock;
- }
-
- info = next_info;
- }
-
- if (info->bytes == bytes) {
+ if (!info->bitmap) {
unlink_free_space(ctl, info);
- if (info->bitmap) {
- kfree(info->bitmap);
- ctl->total_bitmaps--;
- }
- kmem_cache_free(btrfs_free_space_cachep, info);
- ret = 0;
- goto out_lock;
- }
+ if (offset == info->offset) {
+ u64 to_free = min(bytes, info->bytes);
- if (!info->bitmap && info->offset == offset) {
- unlink_free_space(ctl, info);
- info->offset += bytes;
- info->bytes -= bytes;
- ret = link_free_space(ctl, info);
- WARN_ON(ret);
- goto out_lock;
- }
+ info->bytes -= to_free;
+ info->offset += to_free;
+ if (info->bytes) {
+ ret = link_free_space(ctl, info);
+ WARN_ON(ret);
+ } else {
+ kmem_cache_free(btrfs_free_space_cachep, info);
+ }
- if (!info->bitmap && info->offset <= offset &&
- info->offset + info->bytes >= offset + bytes) {
- u64 old_start = info->offset;
- /*
- * we're freeing space in the middle of the info,
- * this can happen during tree log replay
- *
- * first unlink the old info and then
- * insert it again after the hole we're creating
- */
- unlink_free_space(ctl, info);
- if (offset + bytes < info->offset + info->bytes) {
- u64 old_end = info->offset + info->bytes;
+ offset += to_free;
+ bytes -= to_free;
+ goto again;
+ } else {
+ u64 old_end = info->bytes + info->offset;
- info->offset = offset + bytes;
- info->bytes = old_end - info->offset;
+ info->bytes = offset - info->offset;
ret = link_free_space(ctl, info);
WARN_ON(ret);
if (ret)
goto out_lock;
- } else {
- /* the hole we're creating ends at the end
- * of the info struct, just free the info
- */
- kmem_cache_free(btrfs_free_space_cachep, info);
- }
- spin_unlock(&ctl->tree_lock);
- /* step two, insert a new info struct to cover
- * anything before the hole
- */
- ret = btrfs_add_free_space(block_group, old_start,
- offset - old_start);
- WARN_ON(ret); /* -ENOMEM */
- goto out;
+ /* Not enough bytes in this entry to satisfy us */
+ if (old_end < offset + bytes) {
+ bytes -= old_end - offset;
+ offset = old_end;
+ goto again;
+ } else if (old_end == offset + bytes) {
+ /* all done */
+ goto out_lock;
+ }
+ spin_unlock(&ctl->tree_lock);
+
+ ret = btrfs_add_free_space(block_group, offset + bytes,
+ old_end - (offset + bytes));
+ WARN_ON(ret);
+ goto out;
+ }
}
ret = remove_from_bitmap(ctl, info, &offset, &bytes);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index f6ab6f5..fb8d671 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -830,7 +830,7 @@
if (IS_ERR(trans)) {
extent_clear_unlock_delalloc(inode,
&BTRFS_I(inode)->io_tree,
- start, end, NULL,
+ start, end, locked_page,
EXTENT_CLEAR_UNLOCK_PAGE |
EXTENT_CLEAR_UNLOCK |
EXTENT_CLEAR_DELALLOC |
@@ -963,7 +963,7 @@
out_unlock:
extent_clear_unlock_delalloc(inode,
&BTRFS_I(inode)->io_tree,
- start, end, NULL,
+ start, end, locked_page,
EXTENT_CLEAR_UNLOCK_PAGE |
EXTENT_CLEAR_UNLOCK |
EXTENT_CLEAR_DELALLOC |
@@ -986,8 +986,10 @@
compress_file_range(async_cow->inode, async_cow->locked_page,
async_cow->start, async_cow->end, async_cow,
&num_added);
- if (num_added == 0)
+ if (num_added == 0) {
+ btrfs_add_delayed_iput(async_cow->inode);
async_cow->inode = NULL;
+ }
}
/*
@@ -1020,6 +1022,8 @@
{
struct async_cow *async_cow;
async_cow = container_of(work, struct async_cow, work);
+ if (async_cow->inode)
+ btrfs_add_delayed_iput(async_cow->inode);
kfree(async_cow);
}
@@ -1038,7 +1042,7 @@
while (start < end) {
async_cow = kmalloc(sizeof(*async_cow), GFP_NOFS);
BUG_ON(!async_cow); /* -ENOMEM */
- async_cow->inode = inode;
+ async_cow->inode = igrab(inode);
async_cow->root = root;
async_cow->locked_page = locked_page;
async_cow->start = start;
@@ -1136,8 +1140,18 @@
u64 ino = btrfs_ino(inode);
path = btrfs_alloc_path();
- if (!path)
+ if (!path) {
+ extent_clear_unlock_delalloc(inode,
+ &BTRFS_I(inode)->io_tree,
+ start, end, locked_page,
+ EXTENT_CLEAR_UNLOCK_PAGE |
+ EXTENT_CLEAR_UNLOCK |
+ EXTENT_CLEAR_DELALLOC |
+ EXTENT_CLEAR_DIRTY |
+ EXTENT_SET_WRITEBACK |
+ EXTENT_END_WRITEBACK);
return -ENOMEM;
+ }
nolock = btrfs_is_free_space_inode(root, inode);
@@ -1147,6 +1161,15 @@
trans = btrfs_join_transaction(root);
if (IS_ERR(trans)) {
+ extent_clear_unlock_delalloc(inode,
+ &BTRFS_I(inode)->io_tree,
+ start, end, locked_page,
+ EXTENT_CLEAR_UNLOCK_PAGE |
+ EXTENT_CLEAR_UNLOCK |
+ EXTENT_CLEAR_DELALLOC |
+ EXTENT_CLEAR_DIRTY |
+ EXTENT_SET_WRITEBACK |
+ EXTENT_END_WRITEBACK);
btrfs_free_path(path);
return PTR_ERR(trans);
}
@@ -1327,8 +1350,11 @@
}
btrfs_release_path(path);
- if (cur_offset <= end && cow_start == (u64)-1)
+ if (cur_offset <= end && cow_start == (u64)-1) {
cow_start = cur_offset;
+ cur_offset = end;
+ }
+
if (cow_start != (u64)-1) {
ret = cow_file_range(inode, locked_page, cow_start, end,
page_started, nr_written, 1);
@@ -1347,6 +1373,17 @@
if (!ret)
ret = err;
+ if (ret && cur_offset < end)
+ extent_clear_unlock_delalloc(inode,
+ &BTRFS_I(inode)->io_tree,
+ cur_offset, end, locked_page,
+ EXTENT_CLEAR_UNLOCK_PAGE |
+ EXTENT_CLEAR_UNLOCK |
+ EXTENT_CLEAR_DELALLOC |
+ EXTENT_CLEAR_DIRTY |
+ EXTENT_SET_WRITEBACK |
+ EXTENT_END_WRITEBACK);
+
btrfs_free_path(path);
return ret;
}
@@ -1361,20 +1398,23 @@
int ret;
struct btrfs_root *root = BTRFS_I(inode)->root;
- if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATACOW)
+ if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATACOW) {
ret = run_delalloc_nocow(inode, locked_page, start, end,
page_started, 1, nr_written);
- else if (BTRFS_I(inode)->flags & BTRFS_INODE_PREALLOC)
+ } else if (BTRFS_I(inode)->flags & BTRFS_INODE_PREALLOC) {
ret = run_delalloc_nocow(inode, locked_page, start, end,
page_started, 0, nr_written);
- else if (!btrfs_test_opt(root, COMPRESS) &&
- !(BTRFS_I(inode)->force_compress) &&
- !(BTRFS_I(inode)->flags & BTRFS_INODE_COMPRESS))
+ } else if (!btrfs_test_opt(root, COMPRESS) &&
+ !(BTRFS_I(inode)->force_compress) &&
+ !(BTRFS_I(inode)->flags & BTRFS_INODE_COMPRESS)) {
ret = cow_file_range(inode, locked_page, start, end,
page_started, nr_written, 1);
- else
+ } else {
+ set_bit(BTRFS_INODE_HAS_ASYNC_EXTENT,
+ &BTRFS_I(inode)->runtime_flags);
ret = cow_file_range_async(inode, locked_page, start, end,
page_started, nr_written);
+ }
return ret;
}
@@ -3714,7 +3754,7 @@
btrfs_wait_ordered_range(inode, 0, (u64)-1);
if (root->fs_info->log_root_recovering) {
- BUG_ON(!test_bit(BTRFS_INODE_HAS_ORPHAN_ITEM,
+ BUG_ON(test_bit(BTRFS_INODE_HAS_ORPHAN_ITEM,
&BTRFS_I(inode)->runtime_flags));
goto no_delete;
}
@@ -4207,7 +4247,7 @@
}
static struct dentry *btrfs_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct dentry *ret;
@@ -4853,7 +4893,7 @@
}
static int btrfs_create(struct inode *dir, struct dentry *dentry,
- umode_t mode, struct nameidata *nd)
+ umode_t mode, bool excl)
{
struct btrfs_trans_handle *trans;
struct btrfs_root *root = BTRFS_I(dir)->root;
@@ -5836,8 +5876,17 @@
bh_result->b_size = len;
bh_result->b_bdev = em->bdev;
set_buffer_mapped(bh_result);
- if (create && !test_bit(EXTENT_FLAG_PREALLOC, &em->flags))
- set_buffer_new(bh_result);
+ if (create) {
+ if (!test_bit(EXTENT_FLAG_PREALLOC, &em->flags))
+ set_buffer_new(bh_result);
+
+ /*
+ * Need to update the i_size under the extent lock so buffered
+ * readers will get the updated i_size when we unlock.
+ */
+ if (start + len > i_size_read(inode))
+ i_size_write(inode, start + len);
+ }
free_extent_map(em);
@@ -6320,12 +6369,48 @@
*/
ordered = btrfs_lookup_ordered_range(inode, lockstart,
lockend - lockstart + 1);
- if (!ordered)
+
+ /*
+ * We need to make sure there are no buffered pages in this
+ * range either, we could have raced between the invalidate in
+ * generic_file_direct_write and locking the extent. The
+ * invalidate needs to happen so that reads after a write do not
+ * get stale data.
+ */
+ if (!ordered && (!writing ||
+ !test_range_bit(&BTRFS_I(inode)->io_tree,
+ lockstart, lockend, EXTENT_UPTODATE, 0,
+ cached_state)))
break;
+
unlock_extent_cached(&BTRFS_I(inode)->io_tree, lockstart, lockend,
&cached_state, GFP_NOFS);
- btrfs_start_ordered_extent(inode, ordered, 1);
- btrfs_put_ordered_extent(ordered);
+
+ if (ordered) {
+ btrfs_start_ordered_extent(inode, ordered, 1);
+ btrfs_put_ordered_extent(ordered);
+ } else {
+ /* Screw you mmap */
+ ret = filemap_write_and_wait_range(file->f_mapping,
+ lockstart,
+ lockend);
+ if (ret)
+ goto out;
+
+ /*
+ * If we found a page that couldn't be invalidated just
+ * fall back to buffered.
+ */
+ ret = invalidate_inode_pages2_range(file->f_mapping,
+ lockstart >> PAGE_CACHE_SHIFT,
+ lockend >> PAGE_CACHE_SHIFT);
+ if (ret) {
+ if (ret == -EBUSY)
+ ret = 0;
+ goto out;
+ }
+ }
+
cond_resched();
}
@@ -6902,7 +6987,7 @@
struct btrfs_ordered_extent *ordered;
struct btrfs_root *root = BTRFS_I(inode)->root;
- WARN_ON(!list_empty(&inode->i_dentry));
+ WARN_ON(!hlist_empty(&inode->i_dentry));
WARN_ON(inode->i_data.nrpages);
WARN_ON(BTRFS_I(inode)->outstanding_extents);
WARN_ON(BTRFS_I(inode)->reserved_extents);
@@ -7054,10 +7139,13 @@
else
b_inode->flags &= ~BTRFS_INODE_NODATACOW;
- if (b_dir->flags & BTRFS_INODE_COMPRESS)
+ if (b_dir->flags & BTRFS_INODE_COMPRESS) {
b_inode->flags |= BTRFS_INODE_COMPRESS;
- else
- b_inode->flags &= ~BTRFS_INODE_COMPRESS;
+ b_inode->flags &= ~BTRFS_INODE_NOCOMPRESS;
+ } else {
+ b_inode->flags &= ~(BTRFS_INODE_COMPRESS |
+ BTRFS_INODE_NOCOMPRESS);
+ }
}
static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry,
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 24b776c..1e9f6c0 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -52,6 +52,7 @@
#include "locking.h"
#include "inode-map.h"
#include "backref.h"
+#include "rcu-string.h"
/* Mask out flags that are inappropriate for the given type of inode. */
static inline __u32 btrfs_mask_flags(umode_t mode, __u32 flags)
@@ -785,48 +786,12 @@
return -ENOENT;
}
-/*
- * Validaty check of prev em and next em:
- * 1) no prev/next em
- * 2) prev/next em is an hole/inline extent
- */
-static int check_adjacent_extents(struct inode *inode, struct extent_map *em)
+static struct extent_map *defrag_lookup_extent(struct inode *inode, u64 start)
{
struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
- struct extent_map *prev = NULL, *next = NULL;
- int ret = 0;
-
- read_lock(&em_tree->lock);
- prev = lookup_extent_mapping(em_tree, em->start - 1, (u64)-1);
- next = lookup_extent_mapping(em_tree, em->start + em->len, (u64)-1);
- read_unlock(&em_tree->lock);
-
- if ((!prev || prev->block_start >= EXTENT_MAP_LAST_BYTE) &&
- (!next || next->block_start >= EXTENT_MAP_LAST_BYTE))
- ret = 1;
- free_extent_map(prev);
- free_extent_map(next);
-
- return ret;
-}
-
-static int should_defrag_range(struct inode *inode, u64 start, u64 len,
- int thresh, u64 *last_len, u64 *skip,
- u64 *defrag_end)
-{
struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
- struct extent_map *em = NULL;
- struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
- int ret = 1;
-
- /*
- * make sure that once we start defragging an extent, we keep on
- * defragging it
- */
- if (start < *defrag_end)
- return 1;
-
- *skip = 0;
+ struct extent_map *em;
+ u64 len = PAGE_CACHE_SIZE;
/*
* hopefully we have this extent in the tree already, try without
@@ -843,27 +808,64 @@
unlock_extent(io_tree, start, start + len - 1);
if (IS_ERR(em))
- return 0;
+ return NULL;
}
+ return em;
+}
+
+static bool defrag_check_next_extent(struct inode *inode, struct extent_map *em)
+{
+ struct extent_map *next;
+ bool ret = true;
+
+ /* this is the last extent */
+ if (em->start + em->len >= i_size_read(inode))
+ return false;
+
+ next = defrag_lookup_extent(inode, em->start + em->len);
+ if (!next || next->block_start >= EXTENT_MAP_LAST_BYTE)
+ ret = false;
+
+ free_extent_map(next);
+ return ret;
+}
+
+static int should_defrag_range(struct inode *inode, u64 start, int thresh,
+ u64 *last_len, u64 *skip, u64 *defrag_end)
+{
+ struct extent_map *em;
+ int ret = 1;
+ bool next_mergeable = true;
+
+ /*
+ * make sure that once we start defragging an extent, we keep on
+ * defragging it
+ */
+ if (start < *defrag_end)
+ return 1;
+
+ *skip = 0;
+
+ em = defrag_lookup_extent(inode, start);
+ if (!em)
+ return 0;
+
/* this will cover holes, and inline extents */
if (em->block_start >= EXTENT_MAP_LAST_BYTE) {
ret = 0;
goto out;
}
- /* If we have nothing to merge with us, just skip. */
- if (check_adjacent_extents(inode, em)) {
- ret = 0;
- goto out;
- }
+ next_mergeable = defrag_check_next_extent(inode, em);
/*
- * we hit a real extent, if it is big don't bother defragging it again
+ * we hit a real extent, if it is big or the next extent is not a
+ * real extent, don't bother defragging it
*/
- if ((*last_len == 0 || *last_len >= thresh) && em->len >= thresh)
+ if ((*last_len == 0 || *last_len >= thresh) &&
+ (em->len >= thresh || !next_mergeable))
ret = 0;
-
out:
/*
* last_len ends up being a counter of how many bytes we've defragged.
@@ -1142,8 +1144,8 @@
break;
if (!should_defrag_range(inode, (u64)i << PAGE_CACHE_SHIFT,
- PAGE_CACHE_SIZE, extent_thresh,
- &last_len, &skip, &defrag_end)) {
+ extent_thresh, &last_len, &skip,
+ &defrag_end)) {
unsigned long next;
/*
* the should_defrag function tells us how much to skip
@@ -1304,6 +1306,14 @@
ret = -EINVAL;
goto out_free;
}
+ if (device->fs_devices && device->fs_devices->seeding) {
+ printk(KERN_INFO "btrfs: resizer unable to apply on "
+ "seeding device %llu\n",
+ (unsigned long long)devid);
+ ret = -EINVAL;
+ goto out_free;
+ }
+
if (!strcmp(sizestr, "max"))
new_size = device->bdev->bd_inode->i_size;
else {
@@ -1345,8 +1355,9 @@
do_div(new_size, root->sectorsize);
new_size *= root->sectorsize;
- printk(KERN_INFO "btrfs: new size for %s is %llu\n",
- device->name, (unsigned long long)new_size);
+ printk_in_rcu(KERN_INFO "btrfs: new size for %s is %llu\n",
+ rcu_str_deref(device->name),
+ (unsigned long long)new_size);
if (new_size > old_size) {
trans = btrfs_start_transaction(root, 0);
@@ -2264,7 +2275,12 @@
di_args->total_bytes = dev->total_bytes;
memcpy(di_args->uuid, dev->uuid, sizeof(di_args->uuid));
if (dev->name) {
- strncpy(di_args->path, dev->name, sizeof(di_args->path));
+ struct rcu_string *name;
+
+ rcu_read_lock();
+ name = rcu_dereference(dev->name);
+ strncpy(di_args->path, name->str, sizeof(di_args->path));
+ rcu_read_unlock();
di_args->path[sizeof(di_args->path) - 1] = 0;
} else {
di_args->path[0] = '\0';
@@ -3252,7 +3268,7 @@
if (fs_info->sb->s_flags & MS_RDONLY)
return -EROFS;
- ret = mnt_want_write(file->f_path.mnt);
+ ret = mnt_want_write_file(file);
if (ret)
return ret;
@@ -3322,7 +3338,7 @@
out:
mutex_unlock(&fs_info->balance_mutex);
mutex_unlock(&fs_info->volume_mutex);
- mnt_drop_write(file->f_path.mnt);
+ mnt_drop_write_file(file);
return ret;
}
diff --git a/fs/btrfs/ioctl.h b/fs/btrfs/ioctl.h
index 497c530..e440aa6 100644
--- a/fs/btrfs/ioctl.h
+++ b/fs/btrfs/ioctl.h
@@ -339,7 +339,7 @@
#define BTRFS_IOC_WAIT_SYNC _IOW(BTRFS_IOCTL_MAGIC, 22, __u64)
#define BTRFS_IOC_SNAP_CREATE_V2 _IOW(BTRFS_IOCTL_MAGIC, 23, \
struct btrfs_ioctl_vol_args_v2)
-#define BTRFS_IOC_SUBVOL_GETFLAGS _IOW(BTRFS_IOCTL_MAGIC, 25, __u64)
+#define BTRFS_IOC_SUBVOL_GETFLAGS _IOR(BTRFS_IOCTL_MAGIC, 25, __u64)
#define BTRFS_IOC_SUBVOL_SETFLAGS _IOW(BTRFS_IOCTL_MAGIC, 26, __u64)
#define BTRFS_IOC_SCRUB _IOWR(BTRFS_IOCTL_MAGIC, 27, \
struct btrfs_ioctl_scrub_args)
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index 9e138cd..643335a 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -627,7 +627,27 @@
/* start IO across the range first to instantiate any delalloc
* extents
*/
- filemap_write_and_wait_range(inode->i_mapping, start, orig_end);
+ filemap_fdatawrite_range(inode->i_mapping, start, orig_end);
+
+ /*
+ * So with compression we will find and lock a dirty page and clear the
+ * first one as dirty, setup an async extent, and immediately return
+ * with the entire range locked but with nobody actually marked with
+ * writeback. So we can't just filemap_write_and_wait_range() and
+ * expect it to work since it will just kick off a thread to do the
+ * actual work. So we need to call filemap_fdatawrite_range _again_
+ * since it will wait on the page lock, which won't be unlocked until
+ * after the pages have been marked as writeback and so we're good to go
+ * from there. We have to do this otherwise we'll miss the ordered
+ * extents and that results in badness. Please Josef, do not think you
+ * know better and pull this out at some point in the future, it is
+ * right and you are wrong.
+ */
+ if (test_bit(BTRFS_INODE_HAS_ASYNC_EXTENT,
+ &BTRFS_I(inode)->runtime_flags))
+ filemap_fdatawrite_range(inode->i_mapping, start, orig_end);
+
+ filemap_fdatawait_range(inode->i_mapping, start, orig_end);
end = orig_end;
found = 0;
diff --git a/fs/btrfs/rcu-string.h b/fs/btrfs/rcu-string.h
new file mode 100644
index 0000000..9e111e4
--- /dev/null
+++ b/fs/btrfs/rcu-string.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2012 Red Hat. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ */
+
+struct rcu_string {
+ struct rcu_head rcu;
+ char str[0];
+};
+
+static inline struct rcu_string *rcu_string_strdup(const char *src, gfp_t mask)
+{
+ size_t len = strlen(src) + 1;
+ struct rcu_string *ret = kzalloc(sizeof(struct rcu_string) +
+ (len * sizeof(char)), mask);
+ if (!ret)
+ return ret;
+ strncpy(ret->str, src, len);
+ return ret;
+}
+
+static inline void rcu_string_free(struct rcu_string *str)
+{
+ if (str)
+ kfree_rcu(str, rcu);
+}
+
+#define printk_in_rcu(fmt, ...) do { \
+ rcu_read_lock(); \
+ printk(fmt, __VA_ARGS__); \
+ rcu_read_unlock(); \
+} while (0)
+
+#define printk_ratelimited_in_rcu(fmt, ...) do { \
+ rcu_read_lock(); \
+ printk_ratelimited(fmt, __VA_ARGS__); \
+ rcu_read_unlock(); \
+} while (0)
+
+#define rcu_str_deref(rcu_str) ({ \
+ struct rcu_string *__str = rcu_dereference(rcu_str); \
+ __str->str; \
+})
diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c
index a38cfa4..b223620 100644
--- a/fs/btrfs/scrub.c
+++ b/fs/btrfs/scrub.c
@@ -26,6 +26,7 @@
#include "backref.h"
#include "extent_io.h"
#include "check-integrity.h"
+#include "rcu-string.h"
/*
* This is only the first step towards a full-features scrub. It reads all
@@ -320,10 +321,10 @@
* hold all of the paths here
*/
for (i = 0; i < ipath->fspath->elem_cnt; ++i)
- printk(KERN_WARNING "btrfs: %s at logical %llu on dev "
+ printk_in_rcu(KERN_WARNING "btrfs: %s at logical %llu on dev "
"%s, sector %llu, root %llu, inode %llu, offset %llu, "
"length %llu, links %u (path: %s)\n", swarn->errstr,
- swarn->logical, swarn->dev->name,
+ swarn->logical, rcu_str_deref(swarn->dev->name),
(unsigned long long)swarn->sector, root, inum, offset,
min(isize - offset, (u64)PAGE_SIZE), nlink,
(char *)(unsigned long)ipath->fspath->val[i]);
@@ -332,10 +333,10 @@
return 0;
err:
- printk(KERN_WARNING "btrfs: %s at logical %llu on dev "
+ printk_in_rcu(KERN_WARNING "btrfs: %s at logical %llu on dev "
"%s, sector %llu, root %llu, inode %llu, offset %llu: path "
"resolving failed with ret=%d\n", swarn->errstr,
- swarn->logical, swarn->dev->name,
+ swarn->logical, rcu_str_deref(swarn->dev->name),
(unsigned long long)swarn->sector, root, inum, offset, ret);
free_ipath(ipath);
@@ -390,10 +391,11 @@
do {
ret = tree_backref_for_extent(&ptr, eb, ei, item_size,
&ref_root, &ref_level);
- printk(KERN_WARNING
+ printk_in_rcu(KERN_WARNING
"btrfs: %s at logical %llu on dev %s, "
"sector %llu: metadata %s (level %d) in tree "
- "%llu\n", errstr, swarn.logical, dev->name,
+ "%llu\n", errstr, swarn.logical,
+ rcu_str_deref(dev->name),
(unsigned long long)swarn.sector,
ref_level ? "node" : "leaf",
ret < 0 ? -1 : ref_level,
@@ -580,9 +582,11 @@
spin_lock(&sdev->stat_lock);
++sdev->stat.uncorrectable_errors;
spin_unlock(&sdev->stat_lock);
- printk_ratelimited(KERN_ERR
+
+ printk_ratelimited_in_rcu(KERN_ERR
"btrfs: unable to fixup (nodatasum) error at logical %llu on dev %s\n",
- (unsigned long long)fixup->logical, sdev->dev->name);
+ (unsigned long long)fixup->logical,
+ rcu_str_deref(sdev->dev->name));
}
btrfs_free_path(path);
@@ -936,18 +940,20 @@
spin_lock(&sdev->stat_lock);
sdev->stat.corrected_errors++;
spin_unlock(&sdev->stat_lock);
- printk_ratelimited(KERN_ERR
+ printk_ratelimited_in_rcu(KERN_ERR
"btrfs: fixed up error at logical %llu on dev %s\n",
- (unsigned long long)logical, sdev->dev->name);
+ (unsigned long long)logical,
+ rcu_str_deref(sdev->dev->name));
}
} else {
did_not_correct_error:
spin_lock(&sdev->stat_lock);
sdev->stat.uncorrectable_errors++;
spin_unlock(&sdev->stat_lock);
- printk_ratelimited(KERN_ERR
+ printk_ratelimited_in_rcu(KERN_ERR
"btrfs: unable to fixup (regular) error at logical %llu on dev %s\n",
- (unsigned long long)logical, sdev->dev->name);
+ (unsigned long long)logical,
+ rcu_str_deref(sdev->dev->name));
}
out:
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 96eb9fe..b19d755 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -54,6 +54,7 @@
#include "version.h"
#include "export.h"
#include "compression.h"
+#include "rcu-string.h"
#define CREATE_TRACE_POINTS
#include <trace/events/btrfs.h>
@@ -1067,7 +1068,8 @@
}
bdev = fs_devices->latest_bdev;
- s = sget(fs_type, btrfs_test_super, btrfs_set_super, fs_info);
+ s = sget(fs_type, btrfs_test_super, btrfs_set_super, flags | MS_NOSEC,
+ fs_info);
if (IS_ERR(s)) {
error = PTR_ERR(s);
goto error_close_devices;
@@ -1081,7 +1083,6 @@
} else {
char b[BDEVNAME_SIZE];
- s->s_flags = flags | MS_NOSEC;
strlcpy(s->s_id, bdevname(bdev, b), sizeof(s->s_id));
btrfs_sb(s)->bdev_holder = fs_type;
error = btrfs_fill_super(s, fs_devices, data,
@@ -1186,6 +1187,10 @@
if (ret)
goto restore;
+ ret = btrfs_resume_balance_async(fs_info);
+ if (ret)
+ goto restore;
+
sb->s_flags &= ~MS_RDONLY;
}
@@ -1482,12 +1487,44 @@
"error %d\n", btrfs_ino(inode), ret);
}
+static int btrfs_show_devname(struct seq_file *m, struct dentry *root)
+{
+ struct btrfs_fs_info *fs_info = btrfs_sb(root->d_sb);
+ struct btrfs_fs_devices *cur_devices;
+ struct btrfs_device *dev, *first_dev = NULL;
+ struct list_head *head;
+ struct rcu_string *name;
+
+ mutex_lock(&fs_info->fs_devices->device_list_mutex);
+ cur_devices = fs_info->fs_devices;
+ while (cur_devices) {
+ head = &cur_devices->devices;
+ list_for_each_entry(dev, head, dev_list) {
+ if (!first_dev || dev->devid < first_dev->devid)
+ first_dev = dev;
+ }
+ cur_devices = cur_devices->seed;
+ }
+
+ if (first_dev) {
+ rcu_read_lock();
+ name = rcu_dereference(first_dev->name);
+ seq_escape(m, name->str, " \t\n\\");
+ rcu_read_unlock();
+ } else {
+ WARN_ON(1);
+ }
+ mutex_unlock(&fs_info->fs_devices->device_list_mutex);
+ return 0;
+}
+
static const struct super_operations btrfs_super_ops = {
.drop_inode = btrfs_drop_inode,
.evict_inode = btrfs_evict_inode,
.put_super = btrfs_put_super,
.sync_fs = btrfs_sync_fs,
.show_options = btrfs_show_options,
+ .show_devname = btrfs_show_devname,
.write_inode = btrfs_write_inode,
.dirty_inode = btrfs_fs_dirty_inode,
.alloc_inode = btrfs_alloc_inode,
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 1791c6e..b72b068 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -100,6 +100,10 @@
kmem_cache_free(btrfs_transaction_cachep, cur_trans);
cur_trans = fs_info->running_transaction;
goto loop;
+ } else if (root->fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR) {
+ spin_unlock(&root->fs_info->trans_lock);
+ kmem_cache_free(btrfs_transaction_cachep, cur_trans);
+ return -EROFS;
}
atomic_set(&cur_trans->num_writers, 1);
@@ -1213,14 +1217,20 @@
static void cleanup_transaction(struct btrfs_trans_handle *trans,
- struct btrfs_root *root)
+ struct btrfs_root *root, int err)
{
struct btrfs_transaction *cur_trans = trans->transaction;
WARN_ON(trans->use_count > 1);
+ btrfs_abort_transaction(trans, root, err);
+
spin_lock(&root->fs_info->trans_lock);
list_del_init(&cur_trans->list);
+ if (cur_trans == root->fs_info->running_transaction) {
+ root->fs_info->running_transaction = NULL;
+ root->fs_info->trans_no_join = 0;
+ }
spin_unlock(&root->fs_info->trans_lock);
btrfs_cleanup_one_transaction(trans->transaction, root);
@@ -1526,7 +1536,7 @@
// WARN_ON(1);
if (current->journal_info == trans)
current->journal_info = NULL;
- cleanup_transaction(trans, root);
+ cleanup_transaction(trans, root, ret);
return ret;
}
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 2017d0f..8abeae4 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -690,6 +690,8 @@
kfree(name);
iput(inode);
+
+ btrfs_run_delayed_items(trans, root);
return ret;
}
@@ -895,6 +897,7 @@
ret = btrfs_unlink_inode(trans, root, dir,
inode, victim_name,
victim_name_len);
+ btrfs_run_delayed_items(trans, root);
}
kfree(victim_name);
ptr = (unsigned long)(victim_ref + 1) + victim_name_len;
@@ -1475,6 +1478,9 @@
ret = btrfs_unlink_inode(trans, root, dir, inode,
name, name_len);
BUG_ON(ret);
+
+ btrfs_run_delayed_items(trans, root);
+
kfree(name);
iput(inode);
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 7782020..ecaad40 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -35,6 +35,7 @@
#include "volumes.h"
#include "async-thread.h"
#include "check-integrity.h"
+#include "rcu-string.h"
static int init_first_rw_device(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
@@ -64,7 +65,7 @@
device = list_entry(fs_devices->devices.next,
struct btrfs_device, dev_list);
list_del(&device->dev_list);
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
}
kfree(fs_devices);
@@ -334,8 +335,8 @@
{
struct btrfs_device *device;
struct btrfs_fs_devices *fs_devices;
+ struct rcu_string *name;
u64 found_transid = btrfs_super_generation(disk_super);
- char *name;
fs_devices = find_fsid(disk_super->fsid);
if (!fs_devices) {
@@ -369,11 +370,13 @@
memcpy(device->uuid, disk_super->dev_item.uuid,
BTRFS_UUID_SIZE);
spin_lock_init(&device->io_lock);
- device->name = kstrdup(path, GFP_NOFS);
- if (!device->name) {
+
+ name = rcu_string_strdup(path, GFP_NOFS);
+ if (!name) {
kfree(device);
return -ENOMEM;
}
+ rcu_assign_pointer(device->name, name);
INIT_LIST_HEAD(&device->dev_alloc_list);
/* init readahead state */
@@ -390,12 +393,12 @@
device->fs_devices = fs_devices;
fs_devices->num_devices++;
- } else if (!device->name || strcmp(device->name, path)) {
- name = kstrdup(path, GFP_NOFS);
+ } else if (!device->name || strcmp(device->name->str, path)) {
+ name = rcu_string_strdup(path, GFP_NOFS);
if (!name)
return -ENOMEM;
- kfree(device->name);
- device->name = name;
+ rcu_string_free(device->name);
+ rcu_assign_pointer(device->name, name);
if (device->missing) {
fs_devices->missing_devices--;
device->missing = 0;
@@ -430,15 +433,22 @@
/* We have held the volume lock, it is safe to get the devices. */
list_for_each_entry(orig_dev, &orig->devices, dev_list) {
+ struct rcu_string *name;
+
device = kzalloc(sizeof(*device), GFP_NOFS);
if (!device)
goto error;
- device->name = kstrdup(orig_dev->name, GFP_NOFS);
- if (!device->name) {
+ /*
+ * This is ok to do without rcu read locked because we hold the
+ * uuid mutex so nothing we touch in here is going to disappear.
+ */
+ name = rcu_string_strdup(orig_dev->name->str, GFP_NOFS);
+ if (!name) {
kfree(device);
goto error;
}
+ rcu_assign_pointer(device->name, name);
device->devid = orig_dev->devid;
device->work.func = pending_bios_fn;
@@ -491,7 +501,7 @@
}
list_del_init(&device->dev_list);
fs_devices->num_devices--;
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
}
@@ -516,7 +526,7 @@
if (device->bdev)
blkdev_put(device->bdev, device->mode);
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
}
@@ -540,6 +550,7 @@
mutex_lock(&fs_devices->device_list_mutex);
list_for_each_entry(device, &fs_devices->devices, dev_list) {
struct btrfs_device *new_device;
+ struct rcu_string *name;
if (device->bdev)
fs_devices->open_devices--;
@@ -555,8 +566,11 @@
new_device = kmalloc(sizeof(*new_device), GFP_NOFS);
BUG_ON(!new_device); /* -ENOMEM */
memcpy(new_device, device, sizeof(*new_device));
- new_device->name = kstrdup(device->name, GFP_NOFS);
- BUG_ON(device->name && !new_device->name); /* -ENOMEM */
+
+ /* Safe because we are under uuid_mutex */
+ name = rcu_string_strdup(device->name->str, GFP_NOFS);
+ BUG_ON(device->name && !name); /* -ENOMEM */
+ rcu_assign_pointer(new_device->name, name);
new_device->bdev = NULL;
new_device->writeable = 0;
new_device->in_fs_metadata = 0;
@@ -621,9 +635,9 @@
if (!device->name)
continue;
- bdev = blkdev_get_by_path(device->name, flags, holder);
+ bdev = blkdev_get_by_path(device->name->str, flags, holder);
if (IS_ERR(bdev)) {
- printk(KERN_INFO "open %s failed\n", device->name);
+ printk(KERN_INFO "open %s failed\n", device->name->str);
goto error;
}
filemap_write_and_wait(bdev->bd_inode->i_mapping);
@@ -1632,6 +1646,7 @@
struct block_device *bdev;
struct list_head *devices;
struct super_block *sb = root->fs_info->sb;
+ struct rcu_string *name;
u64 total_bytes;
int seeding_dev = 0;
int ret = 0;
@@ -1671,23 +1686,24 @@
goto error;
}
- device->name = kstrdup(device_path, GFP_NOFS);
- if (!device->name) {
+ name = rcu_string_strdup(device_path, GFP_NOFS);
+ if (!name) {
kfree(device);
ret = -ENOMEM;
goto error;
}
+ rcu_assign_pointer(device->name, name);
ret = find_next_devid(root, &device->devid);
if (ret) {
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
goto error;
}
trans = btrfs_start_transaction(root, 0);
if (IS_ERR(trans)) {
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
ret = PTR_ERR(trans);
goto error;
@@ -1796,7 +1812,7 @@
unlock_chunks(root);
btrfs_abort_transaction(trans, root, ret);
btrfs_end_transaction(trans, root);
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
error:
blkdev_put(bdev, FMODE_EXCL);
@@ -2829,31 +2845,48 @@
static int balance_kthread(void *data)
{
- struct btrfs_balance_control *bctl =
- (struct btrfs_balance_control *)data;
- struct btrfs_fs_info *fs_info = bctl->fs_info;
+ struct btrfs_fs_info *fs_info = data;
int ret = 0;
mutex_lock(&fs_info->volume_mutex);
mutex_lock(&fs_info->balance_mutex);
- set_balance_control(bctl);
-
- if (btrfs_test_opt(fs_info->tree_root, SKIP_BALANCE)) {
- printk(KERN_INFO "btrfs: force skipping balance\n");
- } else {
+ if (fs_info->balance_ctl) {
printk(KERN_INFO "btrfs: continuing balance\n");
- ret = btrfs_balance(bctl, NULL);
+ ret = btrfs_balance(fs_info->balance_ctl, NULL);
}
mutex_unlock(&fs_info->balance_mutex);
mutex_unlock(&fs_info->volume_mutex);
+
return ret;
}
-int btrfs_recover_balance(struct btrfs_root *tree_root)
+int btrfs_resume_balance_async(struct btrfs_fs_info *fs_info)
{
struct task_struct *tsk;
+
+ spin_lock(&fs_info->balance_lock);
+ if (!fs_info->balance_ctl) {
+ spin_unlock(&fs_info->balance_lock);
+ return 0;
+ }
+ spin_unlock(&fs_info->balance_lock);
+
+ if (btrfs_test_opt(fs_info->tree_root, SKIP_BALANCE)) {
+ printk(KERN_INFO "btrfs: force skipping balance\n");
+ return 0;
+ }
+
+ tsk = kthread_run(balance_kthread, fs_info, "btrfs-balance");
+ if (IS_ERR(tsk))
+ return PTR_ERR(tsk);
+
+ return 0;
+}
+
+int btrfs_recover_balance(struct btrfs_fs_info *fs_info)
+{
struct btrfs_balance_control *bctl;
struct btrfs_balance_item *item;
struct btrfs_disk_balance_args disk_bargs;
@@ -2866,29 +2899,30 @@
if (!path)
return -ENOMEM;
+ key.objectid = BTRFS_BALANCE_OBJECTID;
+ key.type = BTRFS_BALANCE_ITEM_KEY;
+ key.offset = 0;
+
+ ret = btrfs_search_slot(NULL, fs_info->tree_root, &key, path, 0, 0);
+ if (ret < 0)
+ goto out;
+ if (ret > 0) { /* ret = -ENOENT; */
+ ret = 0;
+ goto out;
+ }
+
bctl = kzalloc(sizeof(*bctl), GFP_NOFS);
if (!bctl) {
ret = -ENOMEM;
goto out;
}
- key.objectid = BTRFS_BALANCE_OBJECTID;
- key.type = BTRFS_BALANCE_ITEM_KEY;
- key.offset = 0;
-
- ret = btrfs_search_slot(NULL, tree_root, &key, path, 0, 0);
- if (ret < 0)
- goto out_bctl;
- if (ret > 0) { /* ret = -ENOENT; */
- ret = 0;
- goto out_bctl;
- }
-
leaf = path->nodes[0];
item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_balance_item);
- bctl->fs_info = tree_root->fs_info;
- bctl->flags = btrfs_balance_flags(leaf, item) | BTRFS_BALANCE_RESUME;
+ bctl->fs_info = fs_info;
+ bctl->flags = btrfs_balance_flags(leaf, item);
+ bctl->flags |= BTRFS_BALANCE_RESUME;
btrfs_balance_data(leaf, item, &disk_bargs);
btrfs_disk_balance_args_to_cpu(&bctl->data, &disk_bargs);
@@ -2897,14 +2931,13 @@
btrfs_balance_sys(leaf, item, &disk_bargs);
btrfs_disk_balance_args_to_cpu(&bctl->sys, &disk_bargs);
- tsk = kthread_run(balance_kthread, bctl, "btrfs-balance");
- if (IS_ERR(tsk))
- ret = PTR_ERR(tsk);
- else
- goto out;
+ mutex_lock(&fs_info->volume_mutex);
+ mutex_lock(&fs_info->balance_mutex);
-out_bctl:
- kfree(bctl);
+ set_balance_control(bctl);
+
+ mutex_unlock(&fs_info->balance_mutex);
+ mutex_unlock(&fs_info->volume_mutex);
out:
btrfs_free_path(path);
return ret;
@@ -4045,16 +4078,18 @@
BUG_ON(stripe_index >= bbio->num_stripes);
dev = bbio->stripes[stripe_index].dev;
- if (bio->bi_rw & WRITE)
- btrfs_dev_stat_inc(dev,
- BTRFS_DEV_STAT_WRITE_ERRS);
- else
- btrfs_dev_stat_inc(dev,
- BTRFS_DEV_STAT_READ_ERRS);
- if ((bio->bi_rw & WRITE_FLUSH) == WRITE_FLUSH)
- btrfs_dev_stat_inc(dev,
- BTRFS_DEV_STAT_FLUSH_ERRS);
- btrfs_dev_stat_print_on_error(dev);
+ if (dev->bdev) {
+ if (bio->bi_rw & WRITE)
+ btrfs_dev_stat_inc(dev,
+ BTRFS_DEV_STAT_WRITE_ERRS);
+ else
+ btrfs_dev_stat_inc(dev,
+ BTRFS_DEV_STAT_READ_ERRS);
+ if ((bio->bi_rw & WRITE_FLUSH) == WRITE_FLUSH)
+ btrfs_dev_stat_inc(dev,
+ BTRFS_DEV_STAT_FLUSH_ERRS);
+ btrfs_dev_stat_print_on_error(dev);
+ }
}
}
@@ -4204,10 +4239,17 @@
bio->bi_sector = bbio->stripes[dev_nr].physical >> 9;
dev = bbio->stripes[dev_nr].dev;
if (dev && dev->bdev && (rw != WRITE || dev->writeable)) {
+#ifdef DEBUG
+ struct rcu_string *name;
+
+ rcu_read_lock();
+ name = rcu_dereference(dev->name);
pr_debug("btrfs_map_bio: rw %d, secor=%llu, dev=%lu "
"(%s id %llu), size=%u\n", rw,
(u64)bio->bi_sector, (u_long)dev->bdev->bd_dev,
- dev->name, dev->devid, bio->bi_size);
+ name->str, dev->devid, bio->bi_size);
+ rcu_read_unlock();
+#endif
bio->bi_bdev = dev->bdev;
if (async_submit)
schedule_bio(root, dev, rw, bio);
@@ -4694,8 +4736,9 @@
key.offset = device->devid;
ret = btrfs_search_slot(NULL, dev_root, &key, path, 0, 0);
if (ret) {
- printk(KERN_WARNING "btrfs: no dev_stats entry found for device %s (devid %llu) (OK on first mount after mkfs)\n",
- device->name, (unsigned long long)device->devid);
+ printk_in_rcu(KERN_WARNING "btrfs: no dev_stats entry found for device %s (devid %llu) (OK on first mount after mkfs)\n",
+ rcu_str_deref(device->name),
+ (unsigned long long)device->devid);
__btrfs_reset_dev_stats(device);
device->dev_stats_valid = 1;
btrfs_release_path(path);
@@ -4747,8 +4790,8 @@
BUG_ON(!path);
ret = btrfs_search_slot(trans, dev_root, &key, path, -1, 1);
if (ret < 0) {
- printk(KERN_WARNING "btrfs: error %d while searching for dev_stats item for device %s!\n",
- ret, device->name);
+ printk_in_rcu(KERN_WARNING "btrfs: error %d while searching for dev_stats item for device %s!\n",
+ ret, rcu_str_deref(device->name));
goto out;
}
@@ -4757,8 +4800,8 @@
/* need to delete old one and insert a new one */
ret = btrfs_del_item(trans, dev_root, path);
if (ret != 0) {
- printk(KERN_WARNING "btrfs: delete too small dev_stats item for device %s failed %d!\n",
- device->name, ret);
+ printk_in_rcu(KERN_WARNING "btrfs: delete too small dev_stats item for device %s failed %d!\n",
+ rcu_str_deref(device->name), ret);
goto out;
}
ret = 1;
@@ -4770,8 +4813,8 @@
ret = btrfs_insert_empty_item(trans, dev_root, path,
&key, sizeof(*ptr));
if (ret < 0) {
- printk(KERN_WARNING "btrfs: insert dev_stats item for device %s failed %d!\n",
- device->name, ret);
+ printk_in_rcu(KERN_WARNING "btrfs: insert dev_stats item for device %s failed %d!\n",
+ rcu_str_deref(device->name), ret);
goto out;
}
}
@@ -4823,9 +4866,9 @@
{
if (!dev->dev_stats_valid)
return;
- printk_ratelimited(KERN_ERR
+ printk_ratelimited_in_rcu(KERN_ERR
"btrfs: bdev %s errs: wr %u, rd %u, flush %u, corrupt %u, gen %u\n",
- dev->name,
+ rcu_str_deref(dev->name),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_WRITE_ERRS),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_READ_ERRS),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_FLUSH_ERRS),
@@ -4837,8 +4880,8 @@
static void btrfs_dev_stat_print_on_load(struct btrfs_device *dev)
{
- printk(KERN_INFO "btrfs: bdev %s errs: wr %u, rd %u, flush %u, corrupt %u, gen %u\n",
- dev->name,
+ printk_in_rcu(KERN_INFO "btrfs: bdev %s errs: wr %u, rd %u, flush %u, corrupt %u, gen %u\n",
+ rcu_str_deref(dev->name),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_WRITE_ERRS),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_READ_ERRS),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_FLUSH_ERRS),
diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
index 3406a88..95f6637 100644
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -58,7 +58,7 @@
/* the mode sent to blkdev_get */
fmode_t mode;
- char *name;
+ struct rcu_string *name;
/* the internal btrfs device id */
u64 devid;
@@ -281,7 +281,8 @@
int btrfs_init_new_device(struct btrfs_root *root, char *path);
int btrfs_balance(struct btrfs_balance_control *bctl,
struct btrfs_ioctl_balance_args *bargs);
-int btrfs_recover_balance(struct btrfs_root *tree_root);
+int btrfs_resume_balance_async(struct btrfs_fs_info *fs_info);
+int btrfs_recover_balance(struct btrfs_fs_info *fs_info);
int btrfs_pause_balance(struct btrfs_fs_info *fs_info);
int btrfs_cancel_balance(struct btrfs_fs_info *fs_info);
int btrfs_chunk_readonly(struct btrfs_root *root, u64 chunk_offset);
diff --git a/fs/buffer.c b/fs/buffer.c
index 838a9cf..c7062c8 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -1036,6 +1036,9 @@
static struct buffer_head *
__getblk_slow(struct block_device *bdev, sector_t block, int size)
{
+ int ret;
+ struct buffer_head *bh;
+
/* Size must be multiple of hard sectorsize */
if (unlikely(size & (bdev_logical_block_size(bdev)-1) ||
(size < 512 || size > PAGE_SIZE))) {
@@ -1048,20 +1051,21 @@
return NULL;
}
- for (;;) {
- struct buffer_head * bh;
- int ret;
+retry:
+ bh = __find_get_block(bdev, block, size);
+ if (bh)
+ return bh;
+ ret = grow_buffers(bdev, block, size);
+ if (ret == 0) {
+ free_more_memory();
+ goto retry;
+ } else if (ret > 0) {
bh = __find_get_block(bdev, block, size);
if (bh)
return bh;
-
- ret = grow_buffers(bdev, block, size);
- if (ret < 0)
- return NULL;
- if (ret == 0)
- free_more_memory();
}
+ return NULL;
}
/*
diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c
index 7f0771d..b0b5f7c 100644
--- a/fs/cachefiles/namei.c
+++ b/fs/cachefiles/namei.c
@@ -567,7 +567,7 @@
if (ret < 0)
goto create_error;
start = jiffies;
- ret = vfs_create(dir->d_inode, next, S_IFREG, NULL);
+ ret = vfs_create(dir->d_inode, next, S_IFREG, true);
cachefiles_hist(cachefiles_create_histogram, start);
if (ret < 0)
goto create_error;
diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c
index 0e3c092..c0353df 100644
--- a/fs/cachefiles/rdwr.c
+++ b/fs/cachefiles/rdwr.c
@@ -891,6 +891,7 @@
struct cachefiles_cache *cache;
mm_segment_t old_fs;
struct file *file;
+ struct path path;
loff_t pos, eof;
size_t len;
void *data;
@@ -916,10 +917,9 @@
/* write the page to the backing filesystem and let it store it in its
* own time */
- dget(object->backer);
- mntget(cache->mnt);
- file = dentry_open(object->backer, cache->mnt, O_RDWR,
- cache->cache_cred);
+ path.mnt = cache->mnt;
+ path.dentry = object->backer;
+ file = dentry_open(&path, O_RDWR, cache->cache_cred);
if (IS_ERR(file)) {
ret = PTR_ERR(file);
} else {
diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index 173b1d2..8b67304 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -54,7 +54,12 @@
(CONGESTION_ON_THRESH(congestion_kb) - \
(CONGESTION_ON_THRESH(congestion_kb) >> 2))
-
+static inline struct ceph_snap_context *page_snap_context(struct page *page)
+{
+ if (PagePrivate(page))
+ return (void *)page->private;
+ return NULL;
+}
/*
* Dirty a page. Optimistically adjust accounting, on the assumption
@@ -142,10 +147,9 @@
{
struct inode *inode;
struct ceph_inode_info *ci;
- struct ceph_snap_context *snapc = (void *)page->private;
+ struct ceph_snap_context *snapc = page_snap_context(page);
BUG_ON(!PageLocked(page));
- BUG_ON(!page->private);
BUG_ON(!PagePrivate(page));
BUG_ON(!page->mapping);
@@ -182,7 +186,6 @@
struct inode *inode = page->mapping ? page->mapping->host : NULL;
dout("%p releasepage %p idx %lu\n", inode, page, page->index);
WARN_ON(PageDirty(page));
- WARN_ON(page->private);
WARN_ON(PagePrivate(page));
return 0;
}
@@ -443,7 +446,7 @@
osdc = &fsc->client->osdc;
/* verify this is a writeable snap context */
- snapc = (void *)page->private;
+ snapc = page_snap_context(page);
if (snapc == NULL) {
dout("writepage %p page %p not dirty?\n", inode, page);
goto out;
@@ -451,7 +454,7 @@
oldest = get_oldest_context(inode, &snap_size);
if (snapc->seq > oldest->seq) {
dout("writepage %p page %p snapc %p not writeable - noop\n",
- inode, page, (void *)page->private);
+ inode, page, snapc);
/* we should only noop if called by kswapd */
WARN_ON((current->flags & PF_MEMALLOC) == 0);
ceph_put_snap_context(oldest);
@@ -591,7 +594,7 @@
clear_bdi_congested(&fsc->backing_dev_info,
BLK_RW_ASYNC);
- ceph_put_snap_context((void *)page->private);
+ ceph_put_snap_context(page_snap_context(page));
page->private = 0;
ClearPagePrivate(page);
dout("unlocking %d %p\n", i, page);
@@ -795,7 +798,7 @@
}
/* only if matching snap context */
- pgsnapc = (void *)page->private;
+ pgsnapc = page_snap_context(page);
if (pgsnapc->seq > snapc->seq) {
dout("page snapc %p %lld > oldest %p %lld\n",
pgsnapc, pgsnapc->seq, snapc, snapc->seq);
@@ -984,7 +987,7 @@
BUG_ON(!ci->i_snap_realm);
down_read(&mdsc->snap_rwsem);
BUG_ON(!ci->i_snap_realm->cached_context);
- snapc = (void *)page->private;
+ snapc = page_snap_context(page);
if (snapc && snapc != ci->i_head_snapc) {
/*
* this page is already dirty in another (older) snap
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 3e8094b..00894ff 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -576,7 +576,7 @@
* the MDS so that it gets our 'caps wanted' value in a single op.
*/
static struct dentry *ceph_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
@@ -594,14 +594,6 @@
if (err < 0)
return ERR_PTR(err);
- /* open (but not create!) intent? */
- if (nd &&
- (nd->flags & LOOKUP_OPEN) &&
- !(nd->intent.open.flags & O_CREAT)) {
- int mode = nd->intent.open.create_mode & ~current->fs->umask;
- return ceph_lookup_open(dir, dentry, nd, mode, 1);
- }
-
/* can we conclude ENOENT locally? */
if (dentry->d_inode == NULL) {
struct ceph_inode_info *ci = ceph_inode(dir);
@@ -642,13 +634,51 @@
return dentry;
}
+int ceph_atomic_open(struct inode *dir, struct dentry *dentry,
+ struct file *file, unsigned flags, umode_t mode,
+ int *opened)
+{
+ int err;
+ struct dentry *res = NULL;
+
+ if (!(flags & O_CREAT)) {
+ if (dentry->d_name.len > NAME_MAX)
+ return -ENAMETOOLONG;
+
+ err = ceph_init_dentry(dentry);
+ if (err < 0)
+ return err;
+
+ return ceph_lookup_open(dir, dentry, file, flags, mode, opened);
+ }
+
+ if (d_unhashed(dentry)) {
+ res = ceph_lookup(dir, dentry, 0);
+ if (IS_ERR(res))
+ return PTR_ERR(res);
+
+ if (res)
+ dentry = res;
+ }
+
+ /* We don't deal with positive dentries here */
+ if (dentry->d_inode)
+ return finish_no_open(file, res);
+
+ *opened |= FILE_CREATED;
+ err = ceph_lookup_open(dir, dentry, file, flags, mode, opened);
+ dput(res);
+
+ return err;
+}
+
/*
* If we do a create but get no trace back from the MDS, follow up with
* a lookup (the VFS expects us to link up the provided dentry).
*/
int ceph_handle_notrace_create(struct inode *dir, struct dentry *dentry)
{
- struct dentry *result = ceph_lookup(dir, dentry, NULL);
+ struct dentry *result = ceph_lookup(dir, dentry, 0);
if (result && !IS_ERR(result)) {
/*
@@ -700,25 +730,9 @@
}
static int ceph_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
- dout("create in dir %p dentry %p name '%.*s'\n",
- dir, dentry, dentry->d_name.len, dentry->d_name.name);
-
- if (ceph_snap(dir) != CEPH_NOSNAP)
- return -EROFS;
-
- if (nd) {
- BUG_ON((nd->flags & LOOKUP_OPEN) == 0);
- dentry = ceph_lookup_open(dir, dentry, nd, mode, 0);
- /* hrm, what should i do here if we get aliased? */
- if (IS_ERR(dentry))
- return PTR_ERR(dentry);
- return 0;
- }
-
- /* fall back to mknod */
- return ceph_mknod(dir, dentry, (mode & ~S_IFMT) | S_IFREG, 0);
+ return ceph_mknod(dir, dentry, mode, 0);
}
static int ceph_symlink(struct inode *dir, struct dentry *dentry,
@@ -1028,12 +1042,12 @@
/*
* Check if cached dentry can be trusted.
*/
-static int ceph_d_revalidate(struct dentry *dentry, struct nameidata *nd)
+static int ceph_d_revalidate(struct dentry *dentry, unsigned int flags)
{
int valid = 0;
struct inode *dir;
- if (nd && nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
dout("d_revalidate %p '%.*s' inode %p offset %lld\n", dentry,
@@ -1080,7 +1094,7 @@
}
static int ceph_snapdir_d_revalidate(struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
/*
* Eventually, we'll want to revalidate snapped metadata
@@ -1357,6 +1371,7 @@
.rmdir = ceph_unlink,
.rename = ceph_rename,
.create = ceph_create,
+ .atomic_open = ceph_atomic_open,
};
const struct dentry_operations ceph_dentry_ops = {
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 988d4f3..1b81d6c 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -213,22 +213,15 @@
* may_open() fails, the struct *file gets cleaned up (i.e.
* ceph_release gets called). So fear not!
*/
-/*
- * flags
- * path_lookup_open -> LOOKUP_OPEN
- * path_lookup_create -> LOOKUP_OPEN|LOOKUP_CREATE
- */
-struct dentry *ceph_lookup_open(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd, int mode,
- int locked_dir)
+int ceph_lookup_open(struct inode *dir, struct dentry *dentry,
+ struct file *file, unsigned flags, umode_t mode,
+ int *opened)
{
struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
- struct file *file;
struct ceph_mds_request *req;
struct dentry *ret;
int err;
- int flags = nd->intent.open.flags;
dout("ceph_lookup_open dentry %p '%.*s' flags %d mode 0%o\n",
dentry, dentry->d_name.len, dentry->d_name.name, flags, mode);
@@ -236,7 +229,7 @@
/* do the open */
req = prepare_open_request(dir->i_sb, flags, mode);
if (IS_ERR(req))
- return ERR_CAST(req);
+ return PTR_ERR(req);
req->r_dentry = dget(dentry);
req->r_num_caps = 2;
if (flags & O_CREAT) {
@@ -254,14 +247,17 @@
err = ceph_handle_notrace_create(dir, dentry);
if (err)
goto out;
- file = lookup_instantiate_filp(nd, req->r_dentry, ceph_open);
- if (IS_ERR(file))
- err = PTR_ERR(file);
+ err = finish_open(file, req->r_dentry, ceph_open, opened);
out:
ret = ceph_finish_lookup(req, dentry, err);
ceph_mdsc_put_request(req);
dout("ceph_lookup_open result=%p\n", ret);
- return ret;
+
+ if (IS_ERR(ret))
+ return PTR_ERR(ret);
+
+ dput(ret);
+ return err;
}
int ceph_release(struct inode *inode, struct file *file)
diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index 1e67dd7..7076109 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -871,7 +871,7 @@
if (ceph_test_opt(fsc->client, NOSHARE))
compare_super = NULL;
- sb = sget(fs_type, compare_super, ceph_set_super, fsc);
+ sb = sget(fs_type, compare_super, ceph_set_super, flags, fsc);
if (IS_ERR(sb)) {
res = ERR_CAST(sb);
goto out;
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index fc35036..f4d5522 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -806,9 +806,9 @@
loff_t off, size_t len);
extern struct page **ceph_alloc_page_vector(int num_pages, gfp_t flags);
extern int ceph_open(struct inode *inode, struct file *file);
-extern struct dentry *ceph_lookup_open(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd, int mode,
- int locked_dir);
+extern int ceph_lookup_open(struct inode *dir, struct dentry *dentry,
+ struct file *od, unsigned flags,
+ umode_t mode, int *opened);
extern int ceph_release(struct inode *inode, struct file *filp);
/* dir.c */
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 8b6e344..a7610cf 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -257,7 +257,6 @@
static void cifs_i_callback(struct rcu_head *head)
{
struct inode *inode = container_of(head, struct inode, i_rcu);
- INIT_LIST_HEAD(&inode->i_dentry);
kmem_cache_free(cifs_inode_cachep, CIFS_I(inode));
}
@@ -638,7 +637,10 @@
mnt_data.cifs_sb = cifs_sb;
mnt_data.flags = flags;
- sb = sget(fs_type, cifs_match_super, cifs_set_super, &mnt_data);
+ /* BB should we make this contingent on mount parm? */
+ flags |= MS_NODIRATIME | MS_NOATIME;
+
+ sb = sget(fs_type, cifs_match_super, cifs_set_super, flags, &mnt_data);
if (IS_ERR(sb)) {
root = ERR_CAST(sb);
cifs_umount(cifs_sb);
@@ -649,10 +651,6 @@
cFYI(1, "Use existing superblock");
cifs_umount(cifs_sb);
} else {
- sb->s_flags = flags;
- /* BB should we make this contingent on mount parm? */
- sb->s_flags |= MS_NODIRATIME | MS_NOATIME;
-
rc = cifs_read_super(sb);
if (rc) {
root = ERR_PTR(rc);
@@ -778,6 +776,7 @@
};
const struct inode_operations cifs_dir_inode_ops = {
.create = cifs_create,
+ .atomic_open = cifs_atomic_open,
.lookup = cifs_lookup,
.getattr = cifs_getattr,
.unlink = cifs_unlink,
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 6536535..1c49c5a 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -45,9 +45,12 @@
extern const struct inode_operations cifs_dir_inode_ops;
extern struct inode *cifs_root_iget(struct super_block *);
extern int cifs_create(struct inode *, struct dentry *, umode_t,
- struct nameidata *);
+ bool excl);
+extern int cifs_atomic_open(struct inode *, struct dentry *,
+ struct file *, unsigned, umode_t,
+ int *);
extern struct dentry *cifs_lookup(struct inode *, struct dentry *,
- struct nameidata *);
+ unsigned int);
extern int cifs_unlink(struct inode *dir, struct dentry *dentry);
extern int cifs_hardlink(struct dentry *, struct inode *, struct dentry *);
extern int cifs_mknod(struct inode *, struct dentry *, umode_t, dev_t);
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 5b40073..4ee522b 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -86,7 +86,31 @@
#endif /* CONFIG_CIFS_WEAK_PW_HASH */
#endif /* CIFS_POSIX */
-/* Forward declarations */
+#ifdef CONFIG_HIGHMEM
+/*
+ * On arches that have high memory, kmap address space is limited. By
+ * serializing the kmap operations on those arches, we ensure that we don't
+ * end up with a bunch of threads in writeback with partially mapped page
+ * arrays, stuck waiting for kmap to come back. That situation prevents
+ * progress and can deadlock.
+ */
+static DEFINE_MUTEX(cifs_kmap_mutex);
+
+static inline void
+cifs_kmap_lock(void)
+{
+ mutex_lock(&cifs_kmap_mutex);
+}
+
+static inline void
+cifs_kmap_unlock(void)
+{
+ mutex_unlock(&cifs_kmap_mutex);
+}
+#else /* !CONFIG_HIGHMEM */
+#define cifs_kmap_lock() do { ; } while(0)
+#define cifs_kmap_unlock() do { ; } while(0)
+#endif /* CONFIG_HIGHMEM */
/* Mark as invalid, all open files on tree connections since they
were closed when session to server was lost */
@@ -1503,7 +1527,9 @@
}
/* marshal up the page array */
+ cifs_kmap_lock();
len = rdata->marshal_iov(rdata, data_len);
+ cifs_kmap_unlock();
data_len -= len;
/* issue the read if we have any iovecs left to fill */
@@ -2069,7 +2095,9 @@
* and set the iov_len properly for each one. It may also set
* wdata->bytes too.
*/
+ cifs_kmap_lock();
wdata->marshal_iov(iov, wdata);
+ cifs_kmap_unlock();
cFYI(1, "async write at %llu %u bytes", wdata->offset, wdata->bytes);
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 78db68a..94b7788 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1653,24 +1653,26 @@
* If yes, we have encountered a double deliminator
* reset the NULL character to the deliminator
*/
- if (tmp_end < end && tmp_end[1] == delim)
+ if (tmp_end < end && tmp_end[1] == delim) {
tmp_end[0] = delim;
- /* Keep iterating until we get to a single deliminator
- * OR the end
- */
- while ((tmp_end = strchr(tmp_end, delim)) != NULL &&
- (tmp_end[1] == delim)) {
- tmp_end = (char *) &tmp_end[2];
- }
+ /* Keep iterating until we get to a single
+ * deliminator OR the end
+ */
+ while ((tmp_end = strchr(tmp_end, delim))
+ != NULL && (tmp_end[1] == delim)) {
+ tmp_end = (char *) &tmp_end[2];
+ }
- /* Reset var options to point to next element */
- if (tmp_end) {
- tmp_end[0] = '\0';
- options = (char *) &tmp_end[1];
- } else
- /* Reached the end of the mount option string */
- options = end;
+ /* Reset var options to point to next element */
+ if (tmp_end) {
+ tmp_end[0] = '\0';
+ options = (char *) &tmp_end[1];
+ } else
+ /* Reached the end of the mount option
+ * string */
+ options = end;
+ }
/* Now build new password string */
temp_len = strlen(value);
@@ -3443,6 +3445,18 @@
#define CIFS_DEFAULT_NON_POSIX_RSIZE (60 * 1024)
#define CIFS_DEFAULT_NON_POSIX_WSIZE (65536)
+/*
+ * On hosts with high memory, we can't currently support wsize/rsize that are
+ * larger than we can kmap at once. Cap the rsize/wsize at
+ * LAST_PKMAP * PAGE_SIZE. We'll never be able to fill a read or write request
+ * larger than that anyway.
+ */
+#ifdef CONFIG_HIGHMEM
+#define CIFS_KMAP_SIZE_LIMIT (LAST_PKMAP * PAGE_CACHE_SIZE)
+#else /* CONFIG_HIGHMEM */
+#define CIFS_KMAP_SIZE_LIMIT (1<<24)
+#endif /* CONFIG_HIGHMEM */
+
static unsigned int
cifs_negotiate_wsize(struct cifs_tcon *tcon, struct smb_vol *pvolume_info)
{
@@ -3473,6 +3487,9 @@
wsize = min_t(unsigned int, wsize,
server->maxBuf - sizeof(WRITE_REQ) + 4);
+ /* limit to the amount that we can kmap at once */
+ wsize = min_t(unsigned int, wsize, CIFS_KMAP_SIZE_LIMIT);
+
/* hard limit of CIFS_MAX_WSIZE */
wsize = min_t(unsigned int, wsize, CIFS_MAX_WSIZE);
@@ -3493,18 +3510,15 @@
* MS-CIFS indicates that servers are only limited by the client's
* bufsize for reads, testing against win98se shows that it throws
* INVALID_PARAMETER errors if you try to request too large a read.
+ * OS/2 just sends back short reads.
*
- * If the server advertises a MaxBufferSize of less than one page,
- * assume that it also can't satisfy reads larger than that either.
- *
- * FIXME: Is there a better heuristic for this?
+ * If the server doesn't advertise CAP_LARGE_READ_X, then assume that
+ * it can't handle a read request larger than its MaxBufferSize either.
*/
if (tcon->unix_ext && (unix_cap & CIFS_UNIX_LARGE_READ_CAP))
defsize = CIFS_DEFAULT_IOSIZE;
else if (server->capabilities & CAP_LARGE_READ_X)
defsize = CIFS_DEFAULT_NON_POSIX_RSIZE;
- else if (server->maxBuf >= PAGE_CACHE_SIZE)
- defsize = CIFSMaxBufSize;
else
defsize = server->maxBuf - sizeof(READ_RSP);
@@ -3517,6 +3531,9 @@
if (!(server->capabilities & CAP_LARGE_READ_X))
rsize = min_t(unsigned int, CIFSMaxBufSize, rsize);
+ /* limit to the amount that we can kmap at once */
+ rsize = min_t(unsigned int, rsize, CIFS_KMAP_SIZE_LIMIT);
+
/* hard limit of CIFS_MAX_RSIZE */
rsize = min_t(unsigned int, rsize, CIFS_MAX_RSIZE);
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index ec4e9a2..a180265 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -133,100 +133,133 @@
return full_path;
}
+/*
+ * Don't allow the separator character in a path component.
+ * The VFS will not allow "/", but "\" is allowed by posix.
+ */
+static int
+check_name(struct dentry *direntry)
+{
+ struct cifs_sb_info *cifs_sb = CIFS_SB(direntry->d_sb);
+ int i;
+
+ if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)) {
+ for (i = 0; i < direntry->d_name.len; i++) {
+ if (direntry->d_name.name[i] == '\\') {
+ cFYI(1, "Invalid file name");
+ return -EINVAL;
+ }
+ }
+ }
+ return 0;
+}
+
+
/* Inode operations in similar order to how they appear in Linux file fs.h */
-int
-cifs_create(struct inode *inode, struct dentry *direntry, umode_t mode,
- struct nameidata *nd)
+static int cifs_do_create(struct inode *inode, struct dentry *direntry,
+ int xid, struct tcon_link *tlink, unsigned oflags,
+ umode_t mode, __u32 *oplock, __u16 *fileHandle,
+ int *created)
{
int rc = -ENOENT;
- int xid;
int create_options = CREATE_NOT_DIR;
- __u32 oplock = 0;
- int oflags;
- /*
- * BB below access is probably too much for mknod to request
- * but we have to do query and setpathinfo so requesting
- * less could fail (unless we want to request getatr and setatr
- * permissions (only). At least for POSIX we do not have to
- * request so much.
- */
- int desiredAccess = GENERIC_READ | GENERIC_WRITE;
- __u16 fileHandle;
- struct cifs_sb_info *cifs_sb;
- struct tcon_link *tlink;
- struct cifs_tcon *tcon;
+ int desiredAccess;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+ struct cifs_tcon *tcon = tlink_tcon(tlink);
char *full_path = NULL;
FILE_ALL_INFO *buf = NULL;
struct inode *newinode = NULL;
- int disposition = FILE_OVERWRITE_IF;
+ int disposition;
- xid = GetXid();
-
- cifs_sb = CIFS_SB(inode->i_sb);
- tlink = cifs_sb_tlink(cifs_sb);
- if (IS_ERR(tlink)) {
- FreeXid(xid);
- return PTR_ERR(tlink);
- }
- tcon = tlink_tcon(tlink);
-
+ *oplock = 0;
if (tcon->ses->server->oplocks)
- oplock = REQ_OPLOCK;
-
- if (nd)
- oflags = nd->intent.open.file->f_flags;
- else
- oflags = O_RDONLY | O_CREAT;
+ *oplock = REQ_OPLOCK;
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
rc = -ENOMEM;
- goto cifs_create_out;
+ goto out;
}
if (tcon->unix_ext && (tcon->ses->capabilities & CAP_UNIX) &&
+ !tcon->broken_posix_open &&
(CIFS_UNIX_POSIX_PATH_OPS_CAP &
le64_to_cpu(tcon->fsUnixInfo.Capability))) {
rc = cifs_posix_open(full_path, &newinode,
- inode->i_sb, mode, oflags, &oplock, &fileHandle, xid);
- /* EIO could indicate that (posix open) operation is not
- supported, despite what server claimed in capability
- negotiation. EREMOTE indicates DFS junction, which is not
- handled in posix open */
-
- if (rc == 0) {
- if (newinode == NULL) /* query inode info */
+ inode->i_sb, mode, oflags, oplock, fileHandle, xid);
+ switch (rc) {
+ case 0:
+ if (newinode == NULL) {
+ /* query inode info */
goto cifs_create_get_file_info;
- else /* success, no need to query */
- goto cifs_create_set_dentry;
- } else if ((rc != -EIO) && (rc != -EREMOTE) &&
- (rc != -EOPNOTSUPP) && (rc != -EINVAL))
- goto cifs_create_out;
- /* else fallthrough to retry, using older open call, this is
- case where server does not support this SMB level, and
- falsely claims capability (also get here for DFS case
- which should be rare for path not covered on files) */
+ }
+
+ if (!S_ISREG(newinode->i_mode)) {
+ /*
+ * The server may allow us to open things like
+ * FIFOs, but the client isn't set up to deal
+ * with that. If it's not a regular file, just
+ * close it and proceed as if it were a normal
+ * lookup.
+ */
+ CIFSSMBClose(xid, tcon, *fileHandle);
+ goto cifs_create_get_file_info;
+ }
+ /* success, no need to query */
+ goto cifs_create_set_dentry;
+
+ case -ENOENT:
+ goto cifs_create_get_file_info;
+
+ case -EIO:
+ case -EINVAL:
+ /*
+ * EIO could indicate that (posix open) operation is not
+ * supported, despite what server claimed in capability
+ * negotiation.
+ *
+ * POSIX open in samba versions 3.3.1 and earlier could
+ * incorrectly fail with invalid parameter.
+ */
+ tcon->broken_posix_open = true;
+ break;
+
+ case -EREMOTE:
+ case -EOPNOTSUPP:
+ /*
+ * EREMOTE indicates DFS junction, which is not handled
+ * in posix open. If either that or op not supported
+ * returned, follow the normal lookup.
+ */
+ break;
+
+ default:
+ goto out;
+ }
+ /*
+ * fallthrough to retry, using older open call, this is case
+ * where server does not support this SMB level, and falsely
+ * claims capability (also get here for DFS case which should be
+ * rare for path not covered on files)
+ */
}
- if (nd) {
- /* if the file is going to stay open, then we
- need to set the desired access properly */
- desiredAccess = 0;
- if (OPEN_FMODE(oflags) & FMODE_READ)
- desiredAccess |= GENERIC_READ; /* is this too little? */
- if (OPEN_FMODE(oflags) & FMODE_WRITE)
- desiredAccess |= GENERIC_WRITE;
+ desiredAccess = 0;
+ if (OPEN_FMODE(oflags) & FMODE_READ)
+ desiredAccess |= GENERIC_READ; /* is this too little? */
+ if (OPEN_FMODE(oflags) & FMODE_WRITE)
+ desiredAccess |= GENERIC_WRITE;
- if ((oflags & (O_CREAT | O_EXCL)) == (O_CREAT | O_EXCL))
- disposition = FILE_CREATE;
- else if ((oflags & (O_CREAT | O_TRUNC)) == (O_CREAT | O_TRUNC))
- disposition = FILE_OVERWRITE_IF;
- else if ((oflags & O_CREAT) == O_CREAT)
- disposition = FILE_OPEN_IF;
- else
- cFYI(1, "Create flag not set in create function");
- }
+ disposition = FILE_OVERWRITE_IF;
+ if ((oflags & (O_CREAT | O_EXCL)) == (O_CREAT | O_EXCL))
+ disposition = FILE_CREATE;
+ else if ((oflags & (O_CREAT | O_TRUNC)) == (O_CREAT | O_TRUNC))
+ disposition = FILE_OVERWRITE_IF;
+ else if ((oflags & O_CREAT) == O_CREAT)
+ disposition = FILE_OPEN_IF;
+ else
+ cFYI(1, "Create flag not set in create function");
/* BB add processing to set equivalent of mode - e.g. via CreateX with
ACLs */
@@ -234,7 +267,7 @@
buf = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL);
if (buf == NULL) {
rc = -ENOMEM;
- goto cifs_create_out;
+ goto out;
}
/*
@@ -250,7 +283,7 @@
if (tcon->ses->capabilities & CAP_NT_SMBS)
rc = CIFSSMBOpen(xid, tcon, full_path, disposition,
desiredAccess, create_options,
- &fileHandle, &oplock, buf, cifs_sb->local_nls,
+ fileHandle, oplock, buf, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
else
rc = -EIO; /* no NT SMB support fall into legacy open below */
@@ -259,17 +292,17 @@
/* old server, retry the open legacy style */
rc = SMBLegacyOpen(xid, tcon, full_path, disposition,
desiredAccess, create_options,
- &fileHandle, &oplock, buf, cifs_sb->local_nls,
+ fileHandle, oplock, buf, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
}
if (rc) {
cFYI(1, "cifs_create returned 0x%x", rc);
- goto cifs_create_out;
+ goto out;
}
/* If Open reported that we actually created a file
then we now have to set the mode if possible */
- if ((tcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) {
+ if ((tcon->unix_ext) && (*oplock & CIFS_CREATE_ACTION)) {
struct cifs_unix_set_info_args args = {
.mode = mode,
.ctime = NO_CHANGE_64,
@@ -278,6 +311,7 @@
.device = 0,
};
+ *created |= FILE_CREATED;
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
args.uid = (__u64) current_fsuid();
if (inode->i_mode & S_ISGID)
@@ -288,7 +322,7 @@
args.uid = NO_CHANGE_64;
args.gid = NO_CHANGE_64;
}
- CIFSSMBUnixSetFileInfo(xid, tcon, &args, fileHandle,
+ CIFSSMBUnixSetFileInfo(xid, tcon, &args, *fileHandle,
current->tgid);
} else {
/* BB implement mode setting via Windows security
@@ -305,11 +339,11 @@
inode->i_sb, xid);
else {
rc = cifs_get_inode_info(&newinode, full_path, buf,
- inode->i_sb, xid, &fileHandle);
+ inode->i_sb, xid, fileHandle);
if (newinode) {
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
newinode->i_mode = mode;
- if ((oplock & CIFS_CREATE_ACTION) &&
+ if ((*oplock & CIFS_CREATE_ACTION) &&
(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) {
newinode->i_uid = current_fsuid();
if (inode->i_mode & S_ISGID)
@@ -321,40 +355,139 @@
}
cifs_create_set_dentry:
- if (rc == 0)
- d_instantiate(direntry, newinode);
- else
+ if (rc != 0) {
cFYI(1, "Create worked, get_inode_info failed rc = %d", rc);
-
- if (newinode && nd) {
- struct cifsFileInfo *pfile_info;
- struct file *filp;
-
- filp = lookup_instantiate_filp(nd, direntry, generic_file_open);
- if (IS_ERR(filp)) {
- rc = PTR_ERR(filp);
- CIFSSMBClose(xid, tcon, fileHandle);
- goto cifs_create_out;
- }
-
- pfile_info = cifs_new_fileinfo(fileHandle, filp, tlink, oplock);
- if (pfile_info == NULL) {
- fput(filp);
- CIFSSMBClose(xid, tcon, fileHandle);
- rc = -ENOMEM;
- }
- } else {
- CIFSSMBClose(xid, tcon, fileHandle);
+ goto out;
}
+ d_drop(direntry);
+ d_add(direntry, newinode);
-cifs_create_out:
+ /* ENOENT for create? How weird... */
+ rc = -ENOENT;
+ if (!newinode) {
+ CIFSSMBClose(xid, tcon, *fileHandle);
+ goto out;
+ }
+ rc = 0;
+
+out:
kfree(buf);
kfree(full_path);
+ return rc;
+}
+
+int
+cifs_atomic_open(struct inode *inode, struct dentry *direntry,
+ struct file *file, unsigned oflags, umode_t mode,
+ int *opened)
+{
+ int rc;
+ int xid;
+ struct tcon_link *tlink;
+ struct cifs_tcon *tcon;
+ __u16 fileHandle;
+ __u32 oplock;
+ struct file *filp;
+ struct cifsFileInfo *pfile_info;
+
+ /* Posix open is only called (at lookup time) for file create now. For
+ * opens (rather than creates), because we do not know if it is a file
+ * or directory yet, and current Samba no longer allows us to do posix
+ * open on dirs, we could end up wasting an open call on what turns out
+ * to be a dir. For file opens, we wait to call posix open till
+ * cifs_open. It could be added to atomic_open in the future but the
+ * performance tradeoff of the extra network request when EISDIR or
+ * EACCES is returned would have to be weighed against the 50% reduction
+ * in network traffic in the other paths.
+ */
+ if (!(oflags & O_CREAT)) {
+ struct dentry *res = cifs_lookup(inode, direntry, 0);
+ if (IS_ERR(res))
+ return PTR_ERR(res);
+
+ return finish_no_open(file, res);
+ }
+
+ rc = check_name(direntry);
+ if (rc)
+ return rc;
+
+ xid = GetXid();
+
+ cFYI(1, "parent inode = 0x%p name is: %s and dentry = 0x%p",
+ inode, direntry->d_name.name, direntry);
+
+ tlink = cifs_sb_tlink(CIFS_SB(inode->i_sb));
+ filp = ERR_CAST(tlink);
+ if (IS_ERR(tlink))
+ goto free_xid;
+
+ tcon = tlink_tcon(tlink);
+
+ rc = cifs_do_create(inode, direntry, xid, tlink, oflags, mode,
+ &oplock, &fileHandle, opened);
+
+ if (rc)
+ goto out;
+
+ rc = finish_open(file, direntry, generic_file_open, opened);
+ if (rc) {
+ CIFSSMBClose(xid, tcon, fileHandle);
+ goto out;
+ }
+
+ pfile_info = cifs_new_fileinfo(fileHandle, filp, tlink, oplock);
+ if (pfile_info == NULL) {
+ CIFSSMBClose(xid, tcon, fileHandle);
+ fput(filp);
+ rc = -ENOMEM;
+ }
+
+out:
cifs_put_tlink(tlink);
+free_xid:
FreeXid(xid);
return rc;
}
+int cifs_create(struct inode *inode, struct dentry *direntry, umode_t mode,
+ bool excl)
+{
+ int rc;
+ int xid = GetXid();
+ /*
+ * BB below access is probably too much for mknod to request
+ * but we have to do query and setpathinfo so requesting
+ * less could fail (unless we want to request getatr and setatr
+ * permissions (only). At least for POSIX we do not have to
+ * request so much.
+ */
+ unsigned oflags = O_EXCL | O_CREAT | O_RDWR;
+ struct tcon_link *tlink;
+ __u16 fileHandle;
+ __u32 oplock;
+ int created = FILE_CREATED;
+
+ cFYI(1, "cifs_create parent inode = 0x%p name is: %s and dentry = 0x%p",
+ inode, direntry->d_name.name, direntry);
+
+ tlink = cifs_sb_tlink(CIFS_SB(inode->i_sb));
+ rc = PTR_ERR(tlink);
+ if (IS_ERR(tlink))
+ goto free_xid;
+
+ rc = cifs_do_create(inode, direntry, xid, tlink, oflags, mode,
+ &oplock, &fileHandle, &created);
+ if (!rc)
+ CIFSSMBClose(xid, tlink_tcon(tlink), fileHandle);
+
+ cifs_put_tlink(tlink);
+free_xid:
+ FreeXid(xid);
+
+ return rc;
+}
+
int cifs_mknod(struct inode *inode, struct dentry *direntry, umode_t mode,
dev_t device_number)
{
@@ -488,20 +621,15 @@
struct dentry *
cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
- struct nameidata *nd)
+ unsigned int flags)
{
int xid;
int rc = 0; /* to get around spurious gcc warning, set to zero here */
- __u32 oplock;
- __u16 fileHandle = 0;
- bool posix_open = false;
struct cifs_sb_info *cifs_sb;
struct tcon_link *tlink;
struct cifs_tcon *pTcon;
- struct cifsFileInfo *cfile;
struct inode *newInode = NULL;
char *full_path = NULL;
- struct file *filp;
xid = GetXid();
@@ -518,31 +646,9 @@
}
pTcon = tlink_tcon(tlink);
- oplock = pTcon->ses->server->oplocks ? REQ_OPLOCK : 0;
-
- /*
- * Don't allow the separator character in a path component.
- * The VFS will not allow "/", but "\" is allowed by posix.
- */
- if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)) {
- int i;
- for (i = 0; i < direntry->d_name.len; i++)
- if (direntry->d_name.name[i] == '\\') {
- cFYI(1, "Invalid file name");
- rc = -EINVAL;
- goto lookup_out;
- }
- }
-
- /*
- * O_EXCL: optimize away the lookup, but don't hash the dentry. Let
- * the VFS handle the create.
- */
- if (nd && (nd->flags & LOOKUP_EXCL)) {
- d_instantiate(direntry, NULL);
- rc = 0;
+ rc = check_name(direntry);
+ if (rc)
goto lookup_out;
- }
/* can not grab the rename sem here since it would
deadlock in the cases (beginning of sys_rename itself)
@@ -560,80 +666,16 @@
}
cFYI(1, "Full path: %s inode = 0x%p", full_path, direntry->d_inode);
- /* Posix open is only called (at lookup time) for file create now.
- * For opens (rather than creates), because we do not know if it
- * is a file or directory yet, and current Samba no longer allows
- * us to do posix open on dirs, we could end up wasting an open call
- * on what turns out to be a dir. For file opens, we wait to call posix
- * open till cifs_open. It could be added here (lookup) in the future
- * but the performance tradeoff of the extra network request when EISDIR
- * or EACCES is returned would have to be weighed against the 50%
- * reduction in network traffic in the other paths.
- */
if (pTcon->unix_ext) {
- if (nd && !(nd->flags & LOOKUP_DIRECTORY) &&
- (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open &&
- (nd->intent.open.file->f_flags & O_CREAT)) {
- rc = cifs_posix_open(full_path, &newInode,
- parent_dir_inode->i_sb,
- nd->intent.open.create_mode,
- nd->intent.open.file->f_flags, &oplock,
- &fileHandle, xid);
- /*
- * The check below works around a bug in POSIX
- * open in samba versions 3.3.1 and earlier where
- * open could incorrectly fail with invalid parameter.
- * If either that or op not supported returned, follow
- * the normal lookup.
- */
- switch (rc) {
- case 0:
- /*
- * The server may allow us to open things like
- * FIFOs, but the client isn't set up to deal
- * with that. If it's not a regular file, just
- * close it and proceed as if it were a normal
- * lookup.
- */
- if (newInode && !S_ISREG(newInode->i_mode)) {
- CIFSSMBClose(xid, pTcon, fileHandle);
- break;
- }
- case -ENOENT:
- posix_open = true;
- case -EOPNOTSUPP:
- break;
- default:
- pTcon->broken_posix_open = true;
- }
- }
- if (!posix_open)
- rc = cifs_get_inode_info_unix(&newInode, full_path,
- parent_dir_inode->i_sb, xid);
- } else
+ rc = cifs_get_inode_info_unix(&newInode, full_path,
+ parent_dir_inode->i_sb, xid);
+ } else {
rc = cifs_get_inode_info(&newInode, full_path, NULL,
parent_dir_inode->i_sb, xid, NULL);
+ }
if ((rc == 0) && (newInode != NULL)) {
d_add(direntry, newInode);
- if (posix_open) {
- filp = lookup_instantiate_filp(nd, direntry,
- generic_file_open);
- if (IS_ERR(filp)) {
- rc = PTR_ERR(filp);
- CIFSSMBClose(xid, pTcon, fileHandle);
- goto lookup_out;
- }
-
- cfile = cifs_new_fileinfo(fileHandle, filp, tlink,
- oplock);
- if (cfile == NULL) {
- fput(filp);
- CIFSSMBClose(xid, pTcon, fileHandle);
- rc = -ENOMEM;
- goto lookup_out;
- }
- }
/* since paths are not looked up by component - the parent
directories are presumed to be good here */
renew_parental_timestamps(direntry);
@@ -658,9 +700,9 @@
}
static int
-cifs_d_revalidate(struct dentry *direntry, struct nameidata *nd)
+cifs_d_revalidate(struct dentry *direntry, unsigned int flags)
{
- if (nd && (nd->flags & LOOKUP_RCU))
+ if (flags & LOOKUP_RCU)
return -ECHILD;
if (direntry->d_inode) {
@@ -689,7 +731,7 @@
* This may be nfsd (or something), anyway, we can't see the
* intent of this. So, since this can be for creation, drop it.
*/
- if (!nd)
+ if (!flags)
return 0;
/*
@@ -697,7 +739,7 @@
* case sensitive name which is specified by user if this is
* for creation.
*/
- if (nd->flags & (LOOKUP_CREATE | LOOKUP_RENAME_TARGET))
+ if (flags & (LOOKUP_CREATE | LOOKUP_RENAME_TARGET))
return 0;
if (time_after(jiffies, direntry->d_time + HZ) || !lookupCacheEnabled)
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 745da3d..8e8bb49 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -800,7 +800,7 @@
return 0;
/* if it's not a directory or has no dentries, then flag it */
- if (S_ISDIR(inode->i_mode) && !list_empty(&inode->i_dentry))
+ if (S_ISDIR(inode->i_mode) && !hlist_empty(&inode->i_dentry))
fattr->cf_flags |= CIFS_FATTR_INO_COLLISION;
return 1;
@@ -825,9 +825,10 @@
inode_has_hashed_dentries(struct inode *inode)
{
struct dentry *dentry;
+ struct hlist_node *p;
spin_lock(&inode->i_lock);
- list_for_each_entry(dentry, &inode->i_dentry, d_alias) {
+ hlist_for_each_entry(dentry, p, &inode->i_dentry, d_alias) {
if (!d_unhashed(dentry) || IS_ROOT(dentry)) {
spin_unlock(&inode->i_lock);
return true;
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 0a8224d..a4217f0 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -86,9 +86,12 @@
dentry = d_lookup(parent, name);
if (dentry) {
- /* FIXME: check for inode number changes? */
- if (dentry->d_inode != NULL)
+ inode = dentry->d_inode;
+ /* update inode in place if i_ino didn't change */
+ if (inode && CIFS_I(inode)->uniqueid == fattr->cf_uniqueid) {
+ cifs_fattr_to_inode(inode, fattr);
return dentry;
+ }
d_drop(dentry);
dput(dentry);
}
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index 3097ee5..f25d4ea 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -365,16 +365,14 @@
if (mid == NULL)
return -ENOMEM;
- /* put it on the pending_mid_q */
- spin_lock(&GlobalMid_Lock);
- list_add_tail(&mid->qhead, &server->pending_mid_q);
- spin_unlock(&GlobalMid_Lock);
-
rc = cifs_sign_smb2(iov, nvec, server, &mid->sequence_number);
- if (rc)
- delete_mid(mid);
+ if (rc) {
+ DeleteMidQEntry(mid);
+ return rc;
+ }
+
*ret_mid = mid;
- return rc;
+ return 0;
}
/*
@@ -407,17 +405,21 @@
mid->callback_data = cbdata;
mid->mid_state = MID_REQUEST_SUBMITTED;
+ /* put it on the pending_mid_q */
+ spin_lock(&GlobalMid_Lock);
+ list_add_tail(&mid->qhead, &server->pending_mid_q);
+ spin_unlock(&GlobalMid_Lock);
+
+
cifs_in_send_inc(server);
rc = smb_sendv(server, iov, nvec);
cifs_in_send_dec(server);
cifs_save_when_sent(mid);
mutex_unlock(&server->srv_mutex);
- if (rc)
- goto out_err;
+ if (rc == 0)
+ return 0;
- return rc;
-out_err:
delete_mid(mid);
add_credits(server, 1);
wake_up(&server->request_q);
diff --git a/fs/coda/cache.c b/fs/coda/cache.c
index 6901578..958ae0e 100644
--- a/fs/coda/cache.c
+++ b/fs/coda/cache.c
@@ -89,17 +89,13 @@
/* this won't do any harm: just flag all children */
static void coda_flag_children(struct dentry *parent, int flag)
{
- struct list_head *child;
struct dentry *de;
spin_lock(&parent->d_lock);
- list_for_each(child, &parent->d_subdirs)
- {
- de = list_entry(child, struct dentry, d_u.d_child);
+ list_for_each_entry(de, &parent->d_subdirs, d_u.d_child) {
/* don't know what to do with negative dentries */
- if ( ! de->d_inode )
- continue;
- coda_flag_inode(de->d_inode, flag);
+ if (de->d_inode )
+ coda_flag_inode(de->d_inode, flag);
}
spin_unlock(&parent->d_lock);
return;
diff --git a/fs/coda/dir.c b/fs/coda/dir.c
index 1775158..49fe52d 100644
--- a/fs/coda/dir.c
+++ b/fs/coda/dir.c
@@ -30,8 +30,8 @@
#include "coda_int.h"
/* dir inode-ops */
-static int coda_create(struct inode *dir, struct dentry *new, umode_t mode, struct nameidata *nd);
-static struct dentry *coda_lookup(struct inode *dir, struct dentry *target, struct nameidata *nd);
+static int coda_create(struct inode *dir, struct dentry *new, umode_t mode, bool excl);
+static struct dentry *coda_lookup(struct inode *dir, struct dentry *target, unsigned int flags);
static int coda_link(struct dentry *old_dentry, struct inode *dir_inode,
struct dentry *entry);
static int coda_unlink(struct inode *dir_inode, struct dentry *entry);
@@ -46,7 +46,7 @@
static int coda_readdir(struct file *file, void *buf, filldir_t filldir);
/* dentry ops */
-static int coda_dentry_revalidate(struct dentry *de, struct nameidata *nd);
+static int coda_dentry_revalidate(struct dentry *de, unsigned int flags);
static int coda_dentry_delete(const struct dentry *);
/* support routines */
@@ -94,7 +94,7 @@
/* inode operations for directories */
/* access routines: lookup, readlink, permission */
-static struct dentry *coda_lookup(struct inode *dir, struct dentry *entry, struct nameidata *nd)
+static struct dentry *coda_lookup(struct inode *dir, struct dentry *entry, unsigned int flags)
{
struct super_block *sb = dir->i_sb;
const char *name = entry->d_name.name;
@@ -188,7 +188,7 @@
}
/* creation routines: create, mknod, mkdir, link, symlink */
-static int coda_create(struct inode *dir, struct dentry *de, umode_t mode, struct nameidata *nd)
+static int coda_create(struct inode *dir, struct dentry *de, umode_t mode, bool excl)
{
int error;
const char *name=de->d_name.name;
@@ -536,12 +536,12 @@
}
/* called when a cache lookup succeeds */
-static int coda_dentry_revalidate(struct dentry *de, struct nameidata *nd)
+static int coda_dentry_revalidate(struct dentry *de, unsigned int flags)
{
struct inode *inode;
struct coda_inode_info *cii;
- if (nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
inode = de->d_inode;
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index 7e6c52d..7414ae2 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -442,7 +442,7 @@
static struct dentry * configfs_lookup(struct inode *dir,
struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct configfs_dirent * parent_sd = dentry->d_parent->d_fsdata;
struct configfs_dirent * sd;
diff --git a/fs/cramfs/inode.c b/fs/cramfs/inode.c
index d013c46..28cca01 100644
--- a/fs/cramfs/inode.c
+++ b/fs/cramfs/inode.c
@@ -417,7 +417,7 @@
/*
* Lookup and fill in the inode data..
*/
-static struct dentry * cramfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
+static struct dentry * cramfs_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
{
unsigned int offset = 0;
struct inode *inode = NULL;
diff --git a/fs/dcache.c b/fs/dcache.c
index 4046904..8086636 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -218,7 +218,7 @@
{
struct dentry *dentry = container_of(head, struct dentry, d_u.d_rcu);
- WARN_ON(!list_empty(&dentry->d_alias));
+ WARN_ON(!hlist_unhashed(&dentry->d_alias));
if (dname_external(dentry))
kfree(dentry->d_name.name);
kmem_cache_free(dentry_cache, dentry);
@@ -267,7 +267,7 @@
struct inode *inode = dentry->d_inode;
if (inode) {
dentry->d_inode = NULL;
- list_del_init(&dentry->d_alias);
+ hlist_del_init(&dentry->d_alias);
spin_unlock(&dentry->d_lock);
spin_unlock(&inode->i_lock);
if (!inode->i_nlink)
@@ -291,7 +291,7 @@
{
struct inode *inode = dentry->d_inode;
dentry->d_inode = NULL;
- list_del_init(&dentry->d_alias);
+ hlist_del_init(&dentry->d_alias);
dentry_rcuwalk_barrier(dentry);
spin_unlock(&dentry->d_lock);
spin_unlock(&inode->i_lock);
@@ -699,10 +699,11 @@
static struct dentry *__d_find_alias(struct inode *inode, int want_discon)
{
struct dentry *alias, *discon_alias;
+ struct hlist_node *p;
again:
discon_alias = NULL;
- list_for_each_entry(alias, &inode->i_dentry, d_alias) {
+ hlist_for_each_entry(alias, p, &inode->i_dentry, d_alias) {
spin_lock(&alias->d_lock);
if (S_ISDIR(inode->i_mode) || !d_unhashed(alias)) {
if (IS_ROOT(alias) &&
@@ -737,7 +738,7 @@
{
struct dentry *de = NULL;
- if (!list_empty(&inode->i_dentry)) {
+ if (!hlist_empty(&inode->i_dentry)) {
spin_lock(&inode->i_lock);
de = __d_find_alias(inode, 0);
spin_unlock(&inode->i_lock);
@@ -753,9 +754,10 @@
void d_prune_aliases(struct inode *inode)
{
struct dentry *dentry;
+ struct hlist_node *p;
restart:
spin_lock(&inode->i_lock);
- list_for_each_entry(dentry, &inode->i_dentry, d_alias) {
+ hlist_for_each_entry(dentry, p, &inode->i_dentry, d_alias) {
spin_lock(&dentry->d_lock);
if (!dentry->d_count) {
__dget_dlock(dentry);
@@ -977,7 +979,7 @@
inode = dentry->d_inode;
if (inode) {
dentry->d_inode = NULL;
- list_del_init(&dentry->d_alias);
+ hlist_del_init(&dentry->d_alias);
if (dentry->d_op && dentry->d_op->d_iput)
dentry->d_op->d_iput(dentry, inode);
else
@@ -1312,7 +1314,7 @@
INIT_HLIST_BL_NODE(&dentry->d_hash);
INIT_LIST_HEAD(&dentry->d_lru);
INIT_LIST_HEAD(&dentry->d_subdirs);
- INIT_LIST_HEAD(&dentry->d_alias);
+ INIT_HLIST_NODE(&dentry->d_alias);
INIT_LIST_HEAD(&dentry->d_u.d_child);
d_set_d_op(dentry, dentry->d_sb->s_d_op);
@@ -1400,7 +1402,7 @@
if (inode) {
if (unlikely(IS_AUTOMOUNT(inode)))
dentry->d_flags |= DCACHE_NEED_AUTOMOUNT;
- list_add(&dentry->d_alias, &inode->i_dentry);
+ hlist_add_head(&dentry->d_alias, &inode->i_dentry);
}
dentry->d_inode = inode;
dentry_rcuwalk_barrier(dentry);
@@ -1425,7 +1427,7 @@
void d_instantiate(struct dentry *entry, struct inode * inode)
{
- BUG_ON(!list_empty(&entry->d_alias));
+ BUG_ON(!hlist_unhashed(&entry->d_alias));
if (inode)
spin_lock(&inode->i_lock);
__d_instantiate(entry, inode);
@@ -1458,13 +1460,14 @@
int len = entry->d_name.len;
const char *name = entry->d_name.name;
unsigned int hash = entry->d_name.hash;
+ struct hlist_node *p;
if (!inode) {
__d_instantiate(entry, NULL);
return NULL;
}
- list_for_each_entry(alias, &inode->i_dentry, d_alias) {
+ hlist_for_each_entry(alias, p, &inode->i_dentry, d_alias) {
/*
* Don't need alias->d_lock here, because aliases with
* d_parent == entry->d_parent are not subject to name or
@@ -1490,7 +1493,7 @@
{
struct dentry *result;
- BUG_ON(!list_empty(&entry->d_alias));
+ BUG_ON(!hlist_unhashed(&entry->d_alias));
if (inode)
spin_lock(&inode->i_lock);
@@ -1531,9 +1534,9 @@
{
struct dentry *alias;
- if (list_empty(&inode->i_dentry))
+ if (hlist_empty(&inode->i_dentry))
return NULL;
- alias = list_first_entry(&inode->i_dentry, struct dentry, d_alias);
+ alias = hlist_entry(inode->i_dentry.first, struct dentry, d_alias);
__dget(alias);
return alias;
}
@@ -1607,7 +1610,7 @@
spin_lock(&tmp->d_lock);
tmp->d_inode = inode;
tmp->d_flags |= DCACHE_DISCONNECTED;
- list_add(&tmp->d_alias, &inode->i_dentry);
+ hlist_add_head(&tmp->d_alias, &inode->i_dentry);
hlist_bl_lock(&tmp->d_sb->s_anon);
hlist_bl_add_head(&tmp->d_hash, &tmp->d_sb->s_anon);
hlist_bl_unlock(&tmp->d_sb->s_anon);
@@ -2384,14 +2387,13 @@
struct dentry *dentry, struct dentry *alias)
{
struct mutex *m1 = NULL, *m2 = NULL;
- struct dentry *ret;
+ struct dentry *ret = ERR_PTR(-EBUSY);
/* If alias and dentry share a parent, then no extra locks required */
if (alias->d_parent == dentry->d_parent)
goto out_unalias;
/* See lock_rename() */
- ret = ERR_PTR(-EBUSY);
if (!mutex_trylock(&dentry->d_sb->s_vfs_rename_mutex))
goto out_err;
m1 = &dentry->d_sb->s_vfs_rename_mutex;
@@ -2399,8 +2401,10 @@
goto out_err;
m2 = &alias->d_parent->d_inode->i_mutex;
out_unalias:
- __d_move(alias, dentry);
- ret = alias;
+ if (likely(!d_mountpoint(alias))) {
+ __d_move(alias, dentry);
+ ret = alias;
+ }
out_err:
spin_unlock(&inode->i_lock);
if (m2)
@@ -2622,7 +2626,7 @@
if (!slash)
error = prepend(buffer, buflen, "/", 1);
if (!error)
- error = real_mount(vfsmnt)->mnt_ns ? 1 : 2;
+ error = is_mounted(vfsmnt) ? 1 : 2;
goto out;
}
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index b80bc84..d17c20f 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -54,13 +54,12 @@
break;
case S_IFLNK:
inode->i_op = &debugfs_link_operations;
- inode->i_fop = fops;
inode->i_private = data;
break;
case S_IFDIR:
inode->i_op = &simple_dir_inode_operations;
- inode->i_fop = fops ? fops : &simple_dir_operations;
- inode->i_private = data;
+ inode->i_fop = &simple_dir_operations;
+ inode->i_private = NULL;
/* directory inodes start off with i_nlink == 2
* (for "." entry) */
@@ -91,13 +90,12 @@
return error;
}
-static int debugfs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode,
- void *data, const struct file_operations *fops)
+static int debugfs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
{
int res;
mode = (mode & (S_IRWXUGO | S_ISVTX)) | S_IFDIR;
- res = debugfs_mknod(dir, dentry, mode, 0, data, fops);
+ res = debugfs_mknod(dir, dentry, mode, 0, NULL, NULL);
if (!res) {
inc_nlink(dir);
fsnotify_mkdir(dir, dentry);
@@ -106,10 +104,10 @@
}
static int debugfs_link(struct inode *dir, struct dentry *dentry, umode_t mode,
- void *data, const struct file_operations *fops)
+ void *data)
{
mode = (mode & S_IALLUGO) | S_IFLNK;
- return debugfs_mknod(dir, dentry, mode, 0, data, fops);
+ return debugfs_mknod(dir, dentry, mode, 0, data, NULL);
}
static int debugfs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
@@ -293,13 +291,19 @@
.kill_sb = kill_litter_super,
};
-static int debugfs_create_by_name(const char *name, umode_t mode,
- struct dentry *parent,
- struct dentry **dentry,
- void *data,
- const struct file_operations *fops)
+struct dentry *__create_file(const char *name, umode_t mode,
+ struct dentry *parent, void *data,
+ const struct file_operations *fops)
{
- int error = 0;
+ struct dentry *dentry = NULL;
+ int error;
+
+ pr_debug("debugfs: creating file '%s'\n",name);
+
+ error = simple_pin_fs(&debug_fs_type, &debugfs_mount,
+ &debugfs_mount_count);
+ if (error)
+ goto exit;
/* If the parent is not specified, we create it in the root.
* We need the root dentry to do this, which is in the super
@@ -309,30 +313,35 @@
if (!parent)
parent = debugfs_mount->mnt_root;
- *dentry = NULL;
+ dentry = NULL;
mutex_lock(&parent->d_inode->i_mutex);
- *dentry = lookup_one_len(name, parent, strlen(name));
- if (!IS_ERR(*dentry)) {
+ dentry = lookup_one_len(name, parent, strlen(name));
+ if (!IS_ERR(dentry)) {
switch (mode & S_IFMT) {
case S_IFDIR:
- error = debugfs_mkdir(parent->d_inode, *dentry, mode,
- data, fops);
+ error = debugfs_mkdir(parent->d_inode, dentry, mode);
+
break;
case S_IFLNK:
- error = debugfs_link(parent->d_inode, *dentry, mode,
- data, fops);
+ error = debugfs_link(parent->d_inode, dentry, mode,
+ data);
break;
default:
- error = debugfs_create(parent->d_inode, *dentry, mode,
+ error = debugfs_create(parent->d_inode, dentry, mode,
data, fops);
break;
}
- dput(*dentry);
+ dput(dentry);
} else
- error = PTR_ERR(*dentry);
+ error = PTR_ERR(dentry);
mutex_unlock(&parent->d_inode->i_mutex);
- return error;
+ if (error) {
+ dentry = NULL;
+ simple_release_fs(&debugfs_mount, &debugfs_mount_count);
+ }
+exit:
+ return dentry;
}
/**
@@ -365,25 +374,15 @@
struct dentry *parent, void *data,
const struct file_operations *fops)
{
- struct dentry *dentry = NULL;
- int error;
-
- pr_debug("debugfs: creating file '%s'\n",name);
-
- error = simple_pin_fs(&debug_fs_type, &debugfs_mount,
- &debugfs_mount_count);
- if (error)
- goto exit;
-
- error = debugfs_create_by_name(name, mode, parent, &dentry,
- data, fops);
- if (error) {
- dentry = NULL;
- simple_release_fs(&debugfs_mount, &debugfs_mount_count);
- goto exit;
+ switch (mode & S_IFMT) {
+ case S_IFREG:
+ case 0:
+ break;
+ default:
+ BUG();
}
-exit:
- return dentry;
+
+ return __create_file(name, mode, parent, data, fops);
}
EXPORT_SYMBOL_GPL(debugfs_create_file);
@@ -407,8 +406,7 @@
*/
struct dentry *debugfs_create_dir(const char *name, struct dentry *parent)
{
- return debugfs_create_file(name,
- S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO,
+ return __create_file(name, S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO,
parent, NULL, NULL);
}
EXPORT_SYMBOL_GPL(debugfs_create_dir);
@@ -446,8 +444,7 @@
if (!link)
return NULL;
- result = debugfs_create_file(name, S_IFLNK | S_IRWXUGO, parent, link,
- NULL);
+ result = __create_file(name, S_IFLNK | S_IRWXUGO, parent, link, NULL);
if (!result)
kfree(link);
return result;
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 979c1e3..14afbab 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -439,15 +439,15 @@
return ERR_PTR(error);
if (opts.newinstance)
- s = sget(fs_type, NULL, set_anon_super, NULL);
+ s = sget(fs_type, NULL, set_anon_super, flags, NULL);
else
- s = sget(fs_type, compare_init_pts_sb, set_anon_super, NULL);
+ s = sget(fs_type, compare_init_pts_sb, set_anon_super, flags,
+ NULL);
if (IS_ERR(s))
return ERR_CAST(s);
if (!s->s_root) {
- s->s_flags = flags;
error = devpts_fill_super(s, data, flags & MS_SILENT ? 1 : 0);
if (error)
goto out_undo_sget;
diff --git a/fs/direct-io.c b/fs/direct-io.c
index 0c85fae..1faf4cb 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -1258,7 +1258,7 @@
*/
BUG_ON(retval == -EIOCBQUEUED);
if (dio->is_async && retval == 0 && dio->result &&
- ((rw & READ) || (dio->result == sdio.size)))
+ ((rw == READ) || (dio->result == sdio.size)))
retval = -EIOCBQUEUED;
if (retval != -EIOCBQUEUED)
diff --git a/fs/ecryptfs/dentry.c b/fs/ecryptfs/dentry.c
index 534c1d4..1b5d9af 100644
--- a/fs/ecryptfs/dentry.c
+++ b/fs/ecryptfs/dentry.c
@@ -32,7 +32,7 @@
/**
* ecryptfs_d_revalidate - revalidate an ecryptfs dentry
* @dentry: The ecryptfs dentry
- * @nd: The associated nameidata
+ * @flags: lookup flags
*
* Called when the VFS needs to revalidate a dentry. This
* is called whenever a name lookup finds a dentry in the
@@ -42,32 +42,20 @@
* Returns 1 if valid, 0 otherwise.
*
*/
-static int ecryptfs_d_revalidate(struct dentry *dentry, struct nameidata *nd)
+static int ecryptfs_d_revalidate(struct dentry *dentry, unsigned int flags)
{
struct dentry *lower_dentry;
struct vfsmount *lower_mnt;
- struct dentry *dentry_save = NULL;
- struct vfsmount *vfsmount_save = NULL;
int rc = 1;
- if (nd && nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
lower_dentry = ecryptfs_dentry_to_lower(dentry);
lower_mnt = ecryptfs_dentry_to_lower_mnt(dentry);
if (!lower_dentry->d_op || !lower_dentry->d_op->d_revalidate)
goto out;
- if (nd) {
- dentry_save = nd->path.dentry;
- vfsmount_save = nd->path.mnt;
- nd->path.dentry = lower_dentry;
- nd->path.mnt = lower_mnt;
- }
- rc = lower_dentry->d_op->d_revalidate(lower_dentry, nd);
- if (nd) {
- nd->path.dentry = dentry_save;
- nd->path.mnt = vfsmount_save;
- }
+ rc = lower_dentry->d_op->d_revalidate(lower_dentry, flags);
if (dentry->d_inode) {
struct inode *lower_inode =
ecryptfs_inode_to_lower(dentry->d_inode);
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index 867b64c..989e034 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -550,20 +550,6 @@
extern struct kmem_cache *ecryptfs_key_sig_cache;
extern struct kmem_cache *ecryptfs_global_auth_tok_cache;
extern struct kmem_cache *ecryptfs_key_tfm_cache;
-extern struct kmem_cache *ecryptfs_open_req_cache;
-
-struct ecryptfs_open_req {
-#define ECRYPTFS_REQ_PROCESSED 0x00000001
-#define ECRYPTFS_REQ_DROPPED 0x00000002
-#define ECRYPTFS_REQ_ZOMBIE 0x00000004
- u32 flags;
- struct file **lower_file;
- struct dentry *lower_dentry;
- struct vfsmount *lower_mnt;
- wait_queue_head_t wait;
- struct mutex mux;
- struct list_head kthread_ctl_list;
-};
struct inode *ecryptfs_get_inode(struct inode *lower_inode,
struct super_block *sb);
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index a07441a..ffa2be5 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -173,7 +173,7 @@
inode = ERR_CAST(lower_dir_dentry);
goto out;
}
- rc = vfs_create(lower_dir_dentry->d_inode, lower_dentry, mode, NULL);
+ rc = vfs_create(lower_dir_dentry->d_inode, lower_dentry, mode, true);
if (rc) {
printk(KERN_ERR "%s: Failure to create dentry in lower fs; "
"rc = [%d]\n", __func__, rc);
@@ -240,7 +240,6 @@
* @dir: The inode of the directory in which to create the file.
* @dentry: The eCryptfs dentry
* @mode: The mode of the new file.
- * @nd: nameidata
*
* Creates a new file.
*
@@ -248,7 +247,7 @@
*/
static int
ecryptfs_create(struct inode *directory_inode, struct dentry *ecryptfs_dentry,
- umode_t mode, struct nameidata *nd)
+ umode_t mode, bool excl)
{
struct inode *ecryptfs_inode;
int rc;
@@ -270,8 +269,8 @@
iput(ecryptfs_inode);
goto out;
}
- d_instantiate(ecryptfs_dentry, ecryptfs_inode);
unlock_new_inode(ecryptfs_inode);
+ d_instantiate(ecryptfs_dentry, ecryptfs_inode);
out:
return rc;
}
@@ -374,7 +373,7 @@
*/
static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode,
struct dentry *ecryptfs_dentry,
- struct nameidata *ecryptfs_nd)
+ unsigned int flags)
{
char *encrypted_and_encoded_name = NULL;
size_t encrypted_and_encoded_name_size;
diff --git a/fs/ecryptfs/kthread.c b/fs/ecryptfs/kthread.c
index 69f994a..809e67d 100644
--- a/fs/ecryptfs/kthread.c
+++ b/fs/ecryptfs/kthread.c
@@ -27,7 +27,12 @@
#include <linux/mount.h>
#include "ecryptfs_kernel.h"
-struct kmem_cache *ecryptfs_open_req_cache;
+struct ecryptfs_open_req {
+ struct file **lower_file;
+ struct path path;
+ struct completion done;
+ struct list_head kthread_ctl_list;
+};
static struct ecryptfs_kthread_ctl {
#define ECRYPTFS_KTHREAD_ZOMBIE 0x00000001
@@ -67,18 +72,10 @@
req = list_first_entry(&ecryptfs_kthread_ctl.req_list,
struct ecryptfs_open_req,
kthread_ctl_list);
- mutex_lock(&req->mux);
list_del(&req->kthread_ctl_list);
- if (!(req->flags & ECRYPTFS_REQ_ZOMBIE)) {
- dget(req->lower_dentry);
- mntget(req->lower_mnt);
- (*req->lower_file) = dentry_open(
- req->lower_dentry, req->lower_mnt,
- (O_RDWR | O_LARGEFILE), current_cred());
- req->flags |= ECRYPTFS_REQ_PROCESSED;
- }
- wake_up(&req->wait);
- mutex_unlock(&req->mux);
+ *req->lower_file = dentry_open(&req->path,
+ (O_RDWR | O_LARGEFILE), current_cred());
+ complete(&req->done);
}
mutex_unlock(&ecryptfs_kthread_ctl.mux);
}
@@ -111,10 +108,9 @@
ecryptfs_kthread_ctl.flags |= ECRYPTFS_KTHREAD_ZOMBIE;
list_for_each_entry(req, &ecryptfs_kthread_ctl.req_list,
kthread_ctl_list) {
- mutex_lock(&req->mux);
- req->flags |= ECRYPTFS_REQ_ZOMBIE;
- wake_up(&req->wait);
- mutex_unlock(&req->mux);
+ list_del(&req->kthread_ctl_list);
+ *req->lower_file = ERR_PTR(-EIO);
+ complete(&req->done);
}
mutex_unlock(&ecryptfs_kthread_ctl.mux);
kthread_stop(ecryptfs_kthread);
@@ -136,34 +132,26 @@
struct vfsmount *lower_mnt,
const struct cred *cred)
{
- struct ecryptfs_open_req *req;
+ struct ecryptfs_open_req req;
int flags = O_LARGEFILE;
int rc = 0;
+ init_completion(&req.done);
+ req.lower_file = lower_file;
+ req.path.dentry = lower_dentry;
+ req.path.mnt = lower_mnt;
+
/* Corresponding dput() and mntput() are done when the
* lower file is fput() when all eCryptfs files for the inode are
* released. */
- dget(lower_dentry);
- mntget(lower_mnt);
flags |= IS_RDONLY(lower_dentry->d_inode) ? O_RDONLY : O_RDWR;
- (*lower_file) = dentry_open(lower_dentry, lower_mnt, flags, cred);
+ (*lower_file) = dentry_open(&req.path, flags, cred);
if (!IS_ERR(*lower_file))
goto out;
- if (flags & O_RDONLY) {
+ if ((flags & O_ACCMODE) == O_RDONLY) {
rc = PTR_ERR((*lower_file));
goto out;
}
- req = kmem_cache_alloc(ecryptfs_open_req_cache, GFP_KERNEL);
- if (!req) {
- rc = -ENOMEM;
- goto out;
- }
- mutex_init(&req->mux);
- req->lower_file = lower_file;
- req->lower_dentry = lower_dentry;
- req->lower_mnt = lower_mnt;
- init_waitqueue_head(&req->wait);
- req->flags = 0;
mutex_lock(&ecryptfs_kthread_ctl.mux);
if (ecryptfs_kthread_ctl.flags & ECRYPTFS_KTHREAD_ZOMBIE) {
rc = -EIO;
@@ -171,27 +159,14 @@
printk(KERN_ERR "%s: We are in the middle of shutting down; "
"aborting privileged request to open lower file\n",
__func__);
- goto out_free;
+ goto out;
}
- list_add_tail(&req->kthread_ctl_list, &ecryptfs_kthread_ctl.req_list);
+ list_add_tail(&req.kthread_ctl_list, &ecryptfs_kthread_ctl.req_list);
mutex_unlock(&ecryptfs_kthread_ctl.mux);
wake_up(&ecryptfs_kthread_ctl.wait);
- wait_event(req->wait, (req->flags != 0));
- mutex_lock(&req->mux);
- BUG_ON(req->flags == 0);
- if (req->flags & ECRYPTFS_REQ_DROPPED
- || req->flags & ECRYPTFS_REQ_ZOMBIE) {
- rc = -EIO;
- printk(KERN_WARNING "%s: Privileged open request dropped\n",
- __func__);
- goto out_unlock;
- }
- if (IS_ERR(*req->lower_file))
- rc = PTR_ERR(*req->lower_file);
-out_unlock:
- mutex_unlock(&req->mux);
-out_free:
- kmem_cache_free(ecryptfs_open_req_cache, req);
+ wait_for_completion(&req.done);
+ if (IS_ERR(*lower_file))
+ rc = PTR_ERR(*lower_file);
out:
return rc;
}
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 6895493..1c0b3b6 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -499,13 +499,12 @@
goto out;
}
- s = sget(fs_type, NULL, set_anon_super, NULL);
+ s = sget(fs_type, NULL, set_anon_super, flags, NULL);
if (IS_ERR(s)) {
rc = PTR_ERR(s);
goto out;
}
- s->s_flags = flags;
rc = bdi_setup_and_register(&sbi->bdi, "ecryptfs", BDI_CAP_MAP_COPY);
if (rc)
goto out1;
@@ -682,11 +681,6 @@
.name = "ecryptfs_key_tfm_cache",
.size = sizeof(struct ecryptfs_key_tfm),
},
- {
- .cache = &ecryptfs_open_req_cache,
- .name = "ecryptfs_open_req_cache",
- .size = sizeof(struct ecryptfs_open_req),
- },
};
static void ecryptfs_free_kmem_caches(void)
diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c
index 3a06f40..c0038f6 100644
--- a/fs/ecryptfs/miscdev.c
+++ b/fs/ecryptfs/miscdev.c
@@ -49,7 +49,10 @@
mutex_lock(&ecryptfs_daemon_hash_mux);
/* TODO: Just use file->private_data? */
rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
- BUG_ON(rc || !daemon);
+ if (rc || !daemon) {
+ mutex_unlock(&ecryptfs_daemon_hash_mux);
+ return -EINVAL;
+ }
mutex_lock(&daemon->mux);
mutex_unlock(&ecryptfs_daemon_hash_mux);
if (daemon->flags & ECRYPTFS_DAEMON_ZOMBIE) {
@@ -122,6 +125,7 @@
goto out_unlock_daemon;
}
daemon->flags |= ECRYPTFS_DAEMON_MISCDEV_OPEN;
+ file->private_data = daemon;
atomic_inc(&ecryptfs_num_miscdev_opens);
out_unlock_daemon:
mutex_unlock(&daemon->mux);
@@ -152,9 +156,9 @@
mutex_lock(&ecryptfs_daemon_hash_mux);
rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
- BUG_ON(rc || !daemon);
+ if (rc || !daemon)
+ daemon = file->private_data;
mutex_lock(&daemon->mux);
- BUG_ON(daemon->pid != task_pid(current));
BUG_ON(!(daemon->flags & ECRYPTFS_DAEMON_MISCDEV_OPEN));
daemon->flags &= ~ECRYPTFS_DAEMON_MISCDEV_OPEN;
atomic_dec(&ecryptfs_num_miscdev_opens);
@@ -191,31 +195,32 @@
struct ecryptfs_msg_ctx *msg_ctx, u8 msg_type,
u16 msg_flags, struct ecryptfs_daemon *daemon)
{
- int rc = 0;
+ struct ecryptfs_message *msg;
- mutex_lock(&msg_ctx->mux);
- msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size),
- GFP_KERNEL);
- if (!msg_ctx->msg) {
- rc = -ENOMEM;
+ msg = kmalloc((sizeof(*msg) + data_size), GFP_KERNEL);
+ if (!msg) {
printk(KERN_ERR "%s: Out of memory whilst attempting "
"to kmalloc(%zd, GFP_KERNEL)\n", __func__,
- (sizeof(*msg_ctx->msg) + data_size));
- goto out_unlock;
+ (sizeof(*msg) + data_size));
+ return -ENOMEM;
}
+
+ mutex_lock(&msg_ctx->mux);
+ msg_ctx->msg = msg;
msg_ctx->msg->index = msg_ctx->index;
msg_ctx->msg->data_len = data_size;
msg_ctx->type = msg_type;
memcpy(msg_ctx->msg->data, data, data_size);
msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size);
- mutex_lock(&daemon->mux);
list_add_tail(&msg_ctx->daemon_out_list, &daemon->msg_ctx_out_queue);
+ mutex_unlock(&msg_ctx->mux);
+
+ mutex_lock(&daemon->mux);
daemon->num_queued_msg_ctx++;
wake_up_interruptible(&daemon->wait);
mutex_unlock(&daemon->mux);
-out_unlock:
- mutex_unlock(&msg_ctx->mux);
- return rc;
+
+ return 0;
}
/*
@@ -269,8 +274,16 @@
mutex_lock(&ecryptfs_daemon_hash_mux);
/* TODO: Just use file->private_data? */
rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
- BUG_ON(rc || !daemon);
+ if (rc || !daemon) {
+ mutex_unlock(&ecryptfs_daemon_hash_mux);
+ return -EINVAL;
+ }
mutex_lock(&daemon->mux);
+ if (task_pid(current) != daemon->pid) {
+ mutex_unlock(&daemon->mux);
+ mutex_unlock(&ecryptfs_daemon_hash_mux);
+ return -EPERM;
+ }
if (daemon->flags & ECRYPTFS_DAEMON_ZOMBIE) {
rc = 0;
mutex_unlock(&ecryptfs_daemon_hash_mux);
@@ -307,9 +320,6 @@
* message from the queue; try again */
goto check_list;
}
- BUG_ON(euid != daemon->euid);
- BUG_ON(current_user_ns() != daemon->user_ns);
- BUG_ON(task_pid(current) != daemon->pid);
msg_ctx = list_first_entry(&daemon->msg_ctx_out_queue,
struct ecryptfs_msg_ctx, daemon_out_list);
BUG_ON(!msg_ctx);
diff --git a/fs/efs/efs.h b/fs/efs/efs.h
index d8305b5..5528926 100644
--- a/fs/efs/efs.h
+++ b/fs/efs/efs.h
@@ -129,7 +129,7 @@
extern efs_block_t efs_map_block(struct inode *, efs_block_t);
extern int efs_get_block(struct inode *, sector_t, struct buffer_head *, int);
-extern struct dentry *efs_lookup(struct inode *, struct dentry *, struct nameidata *);
+extern struct dentry *efs_lookup(struct inode *, struct dentry *, unsigned int);
extern struct dentry *efs_fh_to_dentry(struct super_block *sb, struct fid *fid,
int fh_len, int fh_type);
extern struct dentry *efs_fh_to_parent(struct super_block *sb, struct fid *fid,
diff --git a/fs/efs/namei.c b/fs/efs/namei.c
index 832b10d..96f66d2 100644
--- a/fs/efs/namei.c
+++ b/fs/efs/namei.c
@@ -58,7 +58,8 @@
return(0);
}
-struct dentry *efs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd) {
+struct dentry *efs_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
+{
efs_ino_t inodenum;
struct inode *inode = NULL;
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 74598f6..1c8b556 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1710,7 +1710,7 @@
goto error_tgt_fput;
/* Check if EPOLLWAKEUP is allowed */
- if ((epds.events & EPOLLWAKEUP) && !capable(CAP_EPOLLWAKEUP))
+ if ((epds.events & EPOLLWAKEUP) && !capable(CAP_BLOCK_SUSPEND))
epds.events &= ~EPOLLWAKEUP;
/*
diff --git a/fs/exec.c b/fs/exec.c
index a79786a..da27b91 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -819,10 +819,10 @@
/* Notify parent that we're no longer interested in the old VM */
tsk = current;
old_mm = current->mm;
- sync_mm_rss(old_mm);
mm_release(tsk, old_mm);
if (old_mm) {
+ sync_mm_rss(old_mm);
/*
* Make sure that if there is a core dump in progress
* for the old mm, we get out and die instead of going
diff --git a/fs/exofs/namei.c b/fs/exofs/namei.c
index fc7161d..4731fd9 100644
--- a/fs/exofs/namei.c
+++ b/fs/exofs/namei.c
@@ -46,7 +46,7 @@
}
static struct dentry *exofs_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct inode *inode;
ino_t ino;
@@ -60,7 +60,7 @@
}
static int exofs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
struct inode *inode = exofs_new_inode(dir, mode);
int err = PTR_ERR(inode);
diff --git a/fs/exofs/ore.c b/fs/exofs/ore.c
index 49cf230..24a49d4 100644
--- a/fs/exofs/ore.c
+++ b/fs/exofs/ore.c
@@ -735,13 +735,7 @@
out:
ios->numdevs = devs_in_group;
ios->pages_consumed = cur_pg;
- if (unlikely(ret)) {
- if (length == ios->length)
- return ret;
- else
- ios->length -= length;
- }
- return 0;
+ return ret;
}
int ore_create(struct ore_io_state *ios)
diff --git a/fs/exofs/ore_raid.c b/fs/exofs/ore_raid.c
index d222c77..5f376d1 100644
--- a/fs/exofs/ore_raid.c
+++ b/fs/exofs/ore_raid.c
@@ -144,26 +144,26 @@
{
unsigned data_devs = sp2d->data_devs;
unsigned group_width = data_devs + sp2d->parity;
- unsigned p;
+ int p, c;
if (!sp2d->needed)
return;
+ for (c = data_devs - 1; c >= 0; --c)
+ for (p = sp2d->pages_in_unit - 1; p >= 0; --p) {
+ struct __1_page_stripe *_1ps = &sp2d->_1p_stripes[p];
+
+ if (_1ps->page_is_read[c]) {
+ struct page *page = _1ps->pages[c];
+
+ r4w->put_page(priv, page);
+ _1ps->page_is_read[c] = false;
+ }
+ }
+
for (p = 0; p < sp2d->pages_in_unit; p++) {
struct __1_page_stripe *_1ps = &sp2d->_1p_stripes[p];
- if (_1ps->write_count < group_width) {
- unsigned c;
-
- for (c = 0; c < data_devs; c++)
- if (_1ps->page_is_read[c]) {
- struct page *page = _1ps->pages[c];
-
- r4w->put_page(priv, page);
- _1ps->page_is_read[c] = false;
- }
- }
-
memset(_1ps->pages, 0, group_width * sizeof(*_1ps->pages));
_1ps->write_count = 0;
_1ps->tx = NULL;
@@ -461,16 +461,12 @@
* ios->sp2d[p][*], xor is calculated the same way. These pages are
* allocated/freed and don't go through cache
*/
-static int _read_4_write(struct ore_io_state *ios)
+static int _read_4_write_first_stripe(struct ore_io_state *ios)
{
- struct ore_io_state *ios_read;
struct ore_striping_info read_si;
struct __stripe_pages_2d *sp2d = ios->sp2d;
u64 offset = ios->si.first_stripe_start;
- u64 last_stripe_end;
- unsigned bytes_in_stripe = ios->si.bytes_in_stripe;
- unsigned i, c, p, min_p = sp2d->pages_in_unit, max_p = -1;
- int ret;
+ unsigned c, p, min_p = sp2d->pages_in_unit, max_p = -1;
if (offset == ios->offset) /* Go to start collect $200 */
goto read_last_stripe;
@@ -478,6 +474,9 @@
min_p = _sp2d_min_pg(sp2d);
max_p = _sp2d_max_pg(sp2d);
+ ORE_DBGMSG("stripe_start=0x%llx ios->offset=0x%llx min_p=%d max_p=%d\n",
+ offset, ios->offset, min_p, max_p);
+
for (c = 0; ; c++) {
ore_calc_stripe_info(ios->layout, offset, 0, &read_si);
read_si.obj_offset += min_p * PAGE_SIZE;
@@ -512,6 +511,18 @@
}
read_last_stripe:
+ return 0;
+}
+
+static int _read_4_write_last_stripe(struct ore_io_state *ios)
+{
+ struct ore_striping_info read_si;
+ struct __stripe_pages_2d *sp2d = ios->sp2d;
+ u64 offset;
+ u64 last_stripe_end;
+ unsigned bytes_in_stripe = ios->si.bytes_in_stripe;
+ unsigned c, p, min_p = sp2d->pages_in_unit, max_p = -1;
+
offset = ios->offset + ios->length;
if (offset % PAGE_SIZE)
_add_to_r4w_last_page(ios, &offset);
@@ -527,15 +538,15 @@
c = _dev_order(ios->layout->group_width * ios->layout->mirrors_p1,
ios->layout->mirrors_p1, read_si.par_dev, read_si.dev);
- BUG_ON(ios->si.first_stripe_start + bytes_in_stripe != last_stripe_end);
- /* unaligned IO must be within a single stripe */
-
if (min_p == sp2d->pages_in_unit) {
/* Didn't do it yet */
min_p = _sp2d_min_pg(sp2d);
max_p = _sp2d_max_pg(sp2d);
}
+ ORE_DBGMSG("offset=0x%llx stripe_end=0x%llx min_p=%d max_p=%d\n",
+ offset, last_stripe_end, min_p, max_p);
+
while (offset < last_stripe_end) {
struct __1_page_stripe *_1ps = &sp2d->_1p_stripes[p];
@@ -568,6 +579,15 @@
}
read_it:
+ return 0;
+}
+
+static int _read_4_write_execute(struct ore_io_state *ios)
+{
+ struct ore_io_state *ios_read;
+ unsigned i;
+ int ret;
+
ios_read = ios->ios_read_4_write;
if (!ios_read)
return 0;
@@ -591,6 +611,8 @@
}
_mark_read4write_pages_uptodate(ios_read, ret);
+ ore_put_io_state(ios_read);
+ ios->ios_read_4_write = NULL; /* Might need a reuse at last stripe */
return 0;
}
@@ -626,8 +648,11 @@
/* If first stripe, Read in all read4write pages
* (if needed) before we calculate the first parity.
*/
- _read_4_write(ios);
+ _read_4_write_first_stripe(ios);
}
+ if (!cur_len) /* If last stripe r4w pages of last stripe */
+ _read_4_write_last_stripe(ios);
+ _read_4_write_execute(ios);
for (i = 0; i < num_pages; i++) {
pages[i] = _raid_page_alloc();
@@ -654,34 +679,14 @@
int _ore_post_alloc_raid_stuff(struct ore_io_state *ios)
{
- struct ore_layout *layout = ios->layout;
-
if (ios->parity_pages) {
+ struct ore_layout *layout = ios->layout;
unsigned pages_in_unit = layout->stripe_unit / PAGE_SIZE;
- unsigned stripe_size = ios->si.bytes_in_stripe;
- u64 last_stripe, first_stripe;
if (_sp2d_alloc(pages_in_unit, layout->group_width,
layout->parity, &ios->sp2d)) {
return -ENOMEM;
}
-
- /* Round io down to last full strip */
- first_stripe = div_u64(ios->offset, stripe_size);
- last_stripe = div_u64(ios->offset + ios->length, stripe_size);
-
- /* If an IO spans more then a single stripe it must end at
- * a stripe boundary. The reminder at the end is pushed into the
- * next IO.
- */
- if (last_stripe != first_stripe) {
- ios->length = last_stripe * stripe_size - ios->offset;
-
- BUG_ON(!ios->length);
- ios->nr_pages = (ios->length + PAGE_SIZE - 1) /
- PAGE_SIZE;
- ios->si.length = ios->length; /*make it consistent */
- }
}
return 0;
}
diff --git a/fs/exofs/sys.c b/fs/exofs/sys.c
index e32bc91..5a7b691 100644
--- a/fs/exofs/sys.c
+++ b/fs/exofs/sys.c
@@ -109,7 +109,7 @@
static struct kobj_type uuid_ktype = {
};
-void exofs_sysfs_dbg_print()
+void exofs_sysfs_dbg_print(void)
{
#ifdef CONFIG_EXOFS_DEBUG
struct kobject *k_name, *k_tmp;
diff --git a/fs/exportfs/expfs.c b/fs/exportfs/expfs.c
index b0201ca..29ab099 100644
--- a/fs/exportfs/expfs.c
+++ b/fs/exportfs/expfs.c
@@ -19,19 +19,19 @@
#define dprintk(fmt, args...) do{}while(0)
-static int get_name(struct vfsmount *mnt, struct dentry *dentry, char *name,
- struct dentry *child);
+static int get_name(const struct path *path, char *name, struct dentry *child);
static int exportfs_get_name(struct vfsmount *mnt, struct dentry *dir,
char *name, struct dentry *child)
{
const struct export_operations *nop = dir->d_sb->s_export_op;
+ struct path path = {.mnt = mnt, .dentry = dir};
if (nop->get_name)
return nop->get_name(dir, name, child);
else
- return get_name(mnt, dir, name, child);
+ return get_name(&path, name, child);
}
/*
@@ -44,13 +44,14 @@
{
struct dentry *dentry, *toput = NULL;
struct inode *inode;
+ struct hlist_node *p;
if (acceptable(context, result))
return result;
inode = result->d_inode;
spin_lock(&inode->i_lock);
- list_for_each_entry(dentry, &inode->i_dentry, d_alias) {
+ hlist_for_each_entry(dentry, p, &inode->i_dentry, d_alias) {
dget(dentry);
spin_unlock(&inode->i_lock);
if (toput)
@@ -248,11 +249,10 @@
* calls readdir on the parent until it finds an entry with
* the same inode number as the child, and returns that.
*/
-static int get_name(struct vfsmount *mnt, struct dentry *dentry,
- char *name, struct dentry *child)
+static int get_name(const struct path *path, char *name, struct dentry *child)
{
const struct cred *cred = current_cred();
- struct inode *dir = dentry->d_inode;
+ struct inode *dir = path->dentry->d_inode;
int error;
struct file *file;
struct getdents_callback buffer;
@@ -266,7 +266,7 @@
/*
* Open the directory ...
*/
- file = dentry_open(dget(dentry), mntget(mnt), O_RDONLY, cred);
+ file = dentry_open(path, O_RDONLY, cred);
error = PTR_ERR(file);
if (IS_ERR(file))
goto out;
diff --git a/fs/ext2/namei.c b/fs/ext2/namei.c
index f663a67..73b0d95 100644
--- a/fs/ext2/namei.c
+++ b/fs/ext2/namei.c
@@ -41,8 +41,8 @@
{
int err = ext2_add_link(dentry, inode);
if (!err) {
- d_instantiate(dentry, inode);
unlock_new_inode(inode);
+ d_instantiate(dentry, inode);
return 0;
}
inode_dec_link_count(inode);
@@ -55,7 +55,7 @@
* Methods themselves.
*/
-static struct dentry *ext2_lookup(struct inode * dir, struct dentry *dentry, struct nameidata *nd)
+static struct dentry *ext2_lookup(struct inode * dir, struct dentry *dentry, unsigned int flags)
{
struct inode * inode;
ino_t ino;
@@ -94,7 +94,7 @@
* If the create succeeds, we fill in the inode information
* with d_instantiate().
*/
-static int ext2_create (struct inode * dir, struct dentry * dentry, umode_t mode, struct nameidata *nd)
+static int ext2_create (struct inode * dir, struct dentry * dentry, umode_t mode, bool excl)
{
struct inode *inode;
@@ -242,8 +242,8 @@
if (err)
goto out_fail;
- d_instantiate(dentry, inode);
unlock_new_inode(inode);
+ d_instantiate(dentry, inode);
out:
return err;
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index b3621cb..5df3d2d 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -1184,6 +1184,12 @@
struct ext2_sb_info *sbi = EXT2_SB(sb);
struct ext2_super_block *es = EXT2_SB(sb)->s_es;
+ /*
+ * Write quota structures to quota file, sync_blockdev() will write
+ * them to disk later
+ */
+ dquot_writeback_dquots(sb, -1);
+
spin_lock(&sbi->s_lock);
if (es->s_state & cpu_to_le16(EXT2_VALID_FS)) {
ext2_debug("setting valid to 0\n");
diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c
index 92490e9..c8fff93 100644
--- a/fs/ext3/dir.c
+++ b/fs/ext3/dir.c
@@ -300,10 +300,11 @@
{
struct inode *inode = file->f_mapping->host;
int dx_dir = is_dx_dir(inode);
+ loff_t htree_max = ext3_get_htree_eof(file);
if (likely(dx_dir))
return generic_file_llseek_size(file, offset, origin,
- ext3_get_htree_eof(file));
+ htree_max, htree_max);
else
return generic_file_llseek(file, offset, origin);
}
diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index eeb63df..8f4fdda 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -1011,7 +1011,7 @@
return NULL;
}
-static struct dentry *ext3_lookup(struct inode * dir, struct dentry *dentry, struct nameidata *nd)
+static struct dentry *ext3_lookup(struct inode * dir, struct dentry *dentry, unsigned int flags)
{
struct inode * inode;
struct ext3_dir_entry_2 * de;
@@ -1671,8 +1671,8 @@
int err = ext3_add_entry(handle, dentry, inode);
if (!err) {
ext3_mark_inode_dirty(handle, inode);
- d_instantiate(dentry, inode);
unlock_new_inode(inode);
+ d_instantiate(dentry, inode);
return 0;
}
drop_nlink(inode);
@@ -1690,7 +1690,7 @@
* with d_instantiate().
*/
static int ext3_create (struct inode * dir, struct dentry * dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
handle_t *handle;
struct inode * inode;
@@ -1836,8 +1836,8 @@
if (err)
goto out_clear_inode;
- d_instantiate(dentry, inode);
unlock_new_inode(inode);
+ d_instantiate(dentry, inode);
out_stop:
brelse(dir_block);
ext3_journal_stop(handle);
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 8c3a44b..4ac304c 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -2526,6 +2526,11 @@
tid_t target;
trace_ext3_sync_fs(sb, wait);
+ /*
+ * Writeback quota in non-journalled quota case - journalled quota has
+ * no dirty dquots
+ */
+ dquot_writeback_dquots(sb, -1);
if (journal_start_commit(EXT3_SB(sb)->s_journal, &target)) {
if (wait)
log_wait_commit(EXT3_SB(sb)->s_journal, target);
diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c
index aa39e60..8e07d2a 100644
--- a/fs/ext4/dir.c
+++ b/fs/ext4/dir.c
@@ -324,74 +324,27 @@
/*
- * ext4_dir_llseek() based on generic_file_llseek() to handle both
- * non-htree and htree directories, where the "offset" is in terms
- * of the filename hash value instead of the byte offset.
+ * ext4_dir_llseek() calls generic_file_llseek_size to handle htree
+ * directories, where the "offset" is in terms of the filename hash
+ * value instead of the byte offset.
*
- * NOTE: offsets obtained *before* ext4_set_inode_flag(dir, EXT4_INODE_INDEX)
- * will be invalid once the directory was converted into a dx directory
+ * Because we may return a 64-bit hash that is well beyond offset limits,
+ * we need to pass the max hash as the maximum allowable offset in
+ * the htree directory case.
+ *
+ * For non-htree, ext4_llseek already chooses the proper max offset.
*/
loff_t ext4_dir_llseek(struct file *file, loff_t offset, int origin)
{
struct inode *inode = file->f_mapping->host;
- loff_t ret = -EINVAL;
int dx_dir = is_dx_dir(inode);
+ loff_t htree_max = ext4_get_htree_eof(file);
- mutex_lock(&inode->i_mutex);
-
- /* NOTE: relative offsets with dx directories might not work
- * as expected, as it is difficult to figure out the
- * correct offset between dx hashes */
-
- switch (origin) {
- case SEEK_END:
- if (unlikely(offset > 0))
- goto out_err; /* not supported for directories */
-
- /* so only negative offsets are left, does that have a
- * meaning for directories at all? */
- if (dx_dir)
- offset += ext4_get_htree_eof(file);
- else
- offset += inode->i_size;
- break;
- case SEEK_CUR:
- /*
- * Here we special-case the lseek(fd, 0, SEEK_CUR)
- * position-querying operation. Avoid rewriting the "same"
- * f_pos value back to the file because a concurrent read(),
- * write() or lseek() might have altered it
- */
- if (offset == 0) {
- offset = file->f_pos;
- goto out_ok;
- }
-
- offset += file->f_pos;
- break;
- }
-
- if (unlikely(offset < 0))
- goto out_err;
-
- if (!dx_dir) {
- if (offset > inode->i_sb->s_maxbytes)
- goto out_err;
- } else if (offset > ext4_get_htree_eof(file))
- goto out_err;
-
- /* Special lock needed here? */
- if (offset != file->f_pos) {
- file->f_pos = offset;
- file->f_version = 0;
- }
-
-out_ok:
- ret = offset;
-out_err:
- mutex_unlock(&inode->i_mutex);
-
- return ret;
+ if (likely(dx_dir))
+ return generic_file_llseek_size(file, offset, origin,
+ htree_max, htree_max);
+ else
+ return ext4_llseek(file, offset, origin);
}
/*
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 8c7642a..782eecb 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -211,9 +211,9 @@
}
/*
- * ext4_llseek() copied from generic_file_llseek() to handle both
- * block-mapped and extent-mapped maxbytes values. This should
- * otherwise be identical with generic_file_llseek().
+ * ext4_llseek() handles both block-mapped and extent-mapped maxbytes values
+ * by calling generic_file_llseek_size() with the appropriate maxbytes
+ * value for each.
*/
loff_t ext4_llseek(struct file *file, loff_t offset, int origin)
{
@@ -225,7 +225,8 @@
else
maxbytes = inode->i_sb->s_maxbytes;
- return generic_file_llseek_size(file, offset, origin, maxbytes);
+ return generic_file_llseek_size(file, offset, origin,
+ maxbytes, i_size_read(inode));
}
const struct file_operations ext4_file_operations = {
diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c
index bb6c7d8..2a1dcea 100644
--- a/fs/ext4/fsync.c
+++ b/fs/ext4/fsync.c
@@ -135,14 +135,7 @@
inode = igrab(inode);
while (ext4_test_inode_state(inode, EXT4_STATE_NEWENTRY)) {
ext4_clear_inode_state(inode, EXT4_STATE_NEWENTRY);
- dentry = NULL;
- spin_lock(&inode->i_lock);
- if (!list_empty(&inode->i_dentry)) {
- dentry = list_first_entry(&inode->i_dentry,
- struct dentry, d_alias);
- dget(dentry);
- }
- spin_unlock(&inode->i_lock);
+ dentry = d_find_any_alias(inode);
if (!dentry)
break;
next = igrab(dentry->d_parent->d_inode);
@@ -232,7 +225,7 @@
if (!journal) {
ret = __sync_inode(inode, datasync);
- if (!ret && !list_empty(&inode->i_dentry))
+ if (!ret && !hlist_empty(&inode->i_dentry))
ret = ext4_sync_parent(inode);
goto out;
}
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index e34deac..7f7dad7 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -268,7 +268,6 @@
err = ext4_move_extents(filp, donor_filp, me.orig_start,
me.donor_start, me.len, &me.moved_len);
mnt_drop_write_file(filp);
- mnt_drop_write(filp->f_path.mnt);
if (copy_to_user((struct move_extent __user *)arg,
&me, sizeof(me)))
@@ -390,7 +389,7 @@
if (err)
return err;
- err = mnt_want_write(filp->f_path.mnt);
+ err = mnt_want_write_file(filp);
if (err)
goto resizefs_out;
@@ -402,7 +401,7 @@
}
if (err == 0)
err = err2;
- mnt_drop_write(filp->f_path.mnt);
+ mnt_drop_write_file(filp);
resizefs_out:
ext4_resize_end(sb);
return err;
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 5845cd9..d0d3f0e 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1312,7 +1312,7 @@
return NULL;
}
-static struct dentry *ext4_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
+static struct dentry *ext4_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
{
struct inode *inode;
struct ext4_dir_entry_2 *de;
@@ -2072,8 +2072,8 @@
int err = ext4_add_entry(handle, dentry, inode);
if (!err) {
ext4_mark_inode_dirty(handle, inode);
- d_instantiate(dentry, inode);
unlock_new_inode(inode);
+ d_instantiate(dentry, inode);
return 0;
}
drop_nlink(inode);
@@ -2091,7 +2091,7 @@
* with d_instantiate().
*/
static int ext4_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
handle_t *handle;
struct inode *inode;
@@ -2249,8 +2249,8 @@
err = ext4_mark_inode_dirty(handle, dir);
if (err)
goto out_clear_inode;
- d_instantiate(dentry, inode);
unlock_new_inode(inode);
+ d_instantiate(dentry, inode);
out_stop:
brelse(dir_block);
ext4_journal_stop(handle);
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index eb7aa3e..d875940 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -4325,6 +4325,11 @@
trace_ext4_sync_fs(sb, wait);
flush_workqueue(sbi->dio_unwritten_wq);
+ /*
+ * Writeback quota in non-journalled quota case - journalled quota has
+ * no dirty dquots
+ */
+ dquot_writeback_dquots(sb, -1);
if (jbd2_journal_start_commit(sbi->s_journal, &target)) {
if (wait)
jbd2_log_wait_commit(sbi->s_journal, target);
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index a3d81eb..0038b32 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -738,22 +738,21 @@
fat_encode_fh(struct inode *inode, __u32 *fh, int *lenp, struct inode *parent)
{
int len = *lenp;
- u32 ipos_h, ipos_m, ipos_l;
+ struct msdos_sb_info *sbi = MSDOS_SB(inode->i_sb);
+ loff_t i_pos;
if (len < 5) {
*lenp = 5;
return 255; /* no room */
}
- ipos_h = MSDOS_I(inode)->i_pos >> 8;
- ipos_m = (MSDOS_I(inode)->i_pos & 0xf0) << 24;
- ipos_l = (MSDOS_I(inode)->i_pos & 0x0f) << 28;
+ i_pos = fat_i_pos_read(sbi, inode);
*lenp = 5;
fh[0] = inode->i_ino;
fh[1] = inode->i_generation;
- fh[2] = ipos_h;
- fh[3] = ipos_m | MSDOS_I(inode)->i_logstart;
- fh[4] = ipos_l;
+ fh[2] = i_pos >> 8;
+ fh[3] = ((i_pos & 0xf0) << 24) | MSDOS_I(inode)->i_logstart;
+ fh[4] = (i_pos & 0x0f) << 28;
if (parent)
fh[4] |= MSDOS_I(parent)->i_logstart;
return 3;
diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c
index c5938c9..70d993a 100644
--- a/fs/fat/namei_msdos.c
+++ b/fs/fat/namei_msdos.c
@@ -201,7 +201,7 @@
/***** Get inode using directory and name */
static struct dentry *msdos_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct super_block *sb = dir->i_sb;
struct fat_slot_info sinfo;
@@ -265,7 +265,7 @@
/***** Create a file */
static int msdos_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
struct super_block *sb = dir->i_sb;
struct inode *inode = NULL;
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index 98ae804..6cc4806 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -41,9 +41,9 @@
return ret;
}
-static int vfat_revalidate(struct dentry *dentry, struct nameidata *nd)
+static int vfat_revalidate(struct dentry *dentry, unsigned int flags)
{
- if (nd && nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
/* This is not negative dentry. Always valid. */
@@ -52,9 +52,9 @@
return vfat_revalidate_shortname(dentry);
}
-static int vfat_revalidate_ci(struct dentry *dentry, struct nameidata *nd)
+static int vfat_revalidate_ci(struct dentry *dentry, unsigned int flags)
{
- if (nd && nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
/*
@@ -74,7 +74,7 @@
* This may be nfsd (or something), anyway, we can't see the
* intent of this. So, since this can be for creation, drop it.
*/
- if (!nd)
+ if (!flags)
return 0;
/*
@@ -82,7 +82,7 @@
* case sensitive name which is specified by user if this is
* for creation.
*/
- if (nd->flags & (LOOKUP_CREATE | LOOKUP_RENAME_TARGET))
+ if (flags & (LOOKUP_CREATE | LOOKUP_RENAME_TARGET))
return 0;
return vfat_revalidate_shortname(dentry);
@@ -714,7 +714,7 @@
}
static struct dentry *vfat_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct super_block *sb = dir->i_sb;
struct fat_slot_info sinfo;
@@ -772,7 +772,7 @@
}
static int vfat_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
struct super_block *sb = dir->i_sb;
struct inode *inode;
diff --git a/fs/fifo.c b/fs/fifo.c
index b1a524d..cf6f434 100644
--- a/fs/fifo.c
+++ b/fs/fifo.c
@@ -14,7 +14,7 @@
#include <linux/sched.h>
#include <linux/pipe_fs_i.h>
-static void wait_for_partner(struct inode* inode, unsigned int *cnt)
+static int wait_for_partner(struct inode* inode, unsigned int *cnt)
{
int cur = *cnt;
@@ -23,6 +23,7 @@
if (signal_pending(current))
break;
}
+ return cur == *cnt ? -ERESTARTSYS : 0;
}
static void wake_up_partner(struct inode* inode)
@@ -67,8 +68,7 @@
* seen a writer */
filp->f_version = pipe->w_counter;
} else {
- wait_for_partner(inode, &pipe->w_counter);
- if(signal_pending(current))
+ if (wait_for_partner(inode, &pipe->w_counter))
goto err_rd;
}
}
@@ -90,8 +90,7 @@
wake_up_partner(inode);
if (!pipe->readers) {
- wait_for_partner(inode, &pipe->r_counter);
- if (signal_pending(current))
+ if (wait_for_partner(inode, &pipe->r_counter))
goto err_wr;
}
break;
diff --git a/fs/file_table.c b/fs/file_table.c
index a305d9e..b3fc4d6 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -23,6 +23,8 @@
#include <linux/lglock.h>
#include <linux/percpu_counter.h>
#include <linux/percpu.h>
+#include <linux/hardirq.h>
+#include <linux/task_work.h>
#include <linux/ima.h>
#include <linux/atomic.h>
@@ -251,7 +253,6 @@
}
fops_put(file->f_op);
put_pid(file->f_owner.pid);
- file_sb_list_del(file);
if ((file->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ)
i_readcount_dec(inode);
if (file->f_mode & FMODE_WRITE)
@@ -263,10 +264,77 @@
mntput(mnt);
}
+static DEFINE_SPINLOCK(delayed_fput_lock);
+static LIST_HEAD(delayed_fput_list);
+static void delayed_fput(struct work_struct *unused)
+{
+ LIST_HEAD(head);
+ spin_lock_irq(&delayed_fput_lock);
+ list_splice_init(&delayed_fput_list, &head);
+ spin_unlock_irq(&delayed_fput_lock);
+ while (!list_empty(&head)) {
+ struct file *f = list_first_entry(&head, struct file, f_u.fu_list);
+ list_del_init(&f->f_u.fu_list);
+ __fput(f);
+ }
+}
+
+static void ____fput(struct callback_head *work)
+{
+ __fput(container_of(work, struct file, f_u.fu_rcuhead));
+}
+
+/*
+ * If kernel thread really needs to have the final fput() it has done
+ * to complete, call this. The only user right now is the boot - we
+ * *do* need to make sure our writes to binaries on initramfs has
+ * not left us with opened struct file waiting for __fput() - execve()
+ * won't work without that. Please, don't add more callers without
+ * very good reasons; in particular, never call that with locks
+ * held and never call that from a thread that might need to do
+ * some work on any kind of umount.
+ */
+void flush_delayed_fput(void)
+{
+ delayed_fput(NULL);
+}
+
+static DECLARE_WORK(delayed_fput_work, delayed_fput);
+
void fput(struct file *file)
{
- if (atomic_long_dec_and_test(&file->f_count))
+ if (atomic_long_dec_and_test(&file->f_count)) {
+ struct task_struct *task = current;
+ file_sb_list_del(file);
+ if (unlikely(in_interrupt() || task->flags & PF_KTHREAD)) {
+ unsigned long flags;
+ spin_lock_irqsave(&delayed_fput_lock, flags);
+ list_add(&file->f_u.fu_list, &delayed_fput_list);
+ schedule_work(&delayed_fput_work);
+ spin_unlock_irqrestore(&delayed_fput_lock, flags);
+ return;
+ }
+ init_task_work(&file->f_u.fu_rcuhead, ____fput);
+ task_work_add(task, &file->f_u.fu_rcuhead, true);
+ }
+}
+
+/*
+ * synchronous analog of fput(); for kernel threads that might be needed
+ * in some umount() (and thus can't use flush_delayed_fput() without
+ * risking deadlocks), need to wait for completion of __fput() and know
+ * for this specific struct file it won't involve anything that would
+ * need them. Use only if you really need it - at the very least,
+ * don't blindly convert fput() by kernel thread to that.
+ */
+void __fput_sync(struct file *file)
+{
+ if (atomic_long_dec_and_test(&file->f_count)) {
+ struct task_struct *task = current;
+ file_sb_list_del(file);
+ BUG_ON(!(task->flags & PF_KTHREAD));
__fput(file);
+ }
}
EXPORT_SYMBOL(fput);
@@ -483,10 +551,8 @@
{
struct file *f;
-retry:
lg_global_lock(&files_lglock);
do_file_list_for_each_entry(sb, f) {
- struct vfsmount *mnt;
if (!S_ISREG(f->f_path.dentry->d_inode->i_mode))
continue;
if (!file_count(f))
@@ -499,12 +565,7 @@
if (file_check_writeable(f) != 0)
continue;
file_release_write(f);
- mnt = mntget(f->f_path.mnt);
- /* This can sleep, so we can't hold the spinlock. */
- lg_global_unlock(&files_lglock);
- mnt_drop_write(mnt);
- mntput(mnt);
- goto retry;
+ mnt_drop_write_file(f);
} while_file_list_for_each_entry;
lg_global_unlock(&files_lglock);
}
diff --git a/fs/freevxfs/vxfs_lookup.c b/fs/freevxfs/vxfs_lookup.c
index 3360f1e..bd447e8 100644
--- a/fs/freevxfs/vxfs_lookup.c
+++ b/fs/freevxfs/vxfs_lookup.c
@@ -48,7 +48,7 @@
#define VXFS_BLOCK_PER_PAGE(sbp) ((PAGE_CACHE_SIZE / (sbp)->s_blocksize))
-static struct dentry * vxfs_lookup(struct inode *, struct dentry *, struct nameidata *);
+static struct dentry * vxfs_lookup(struct inode *, struct dentry *, unsigned int);
static int vxfs_readdir(struct file *, void *, filldir_t);
const struct inode_operations vxfs_dir_inode_ops = {
@@ -203,7 +203,7 @@
* in the return pointer.
*/
static struct dentry *
-vxfs_lookup(struct inode *dip, struct dentry *dp, struct nameidata *nd)
+vxfs_lookup(struct inode *dip, struct dentry *dp, unsigned int flags)
{
struct inode *ip = NULL;
ino_t ino;
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 8d2fb8c..8f660dd 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -664,6 +664,7 @@
/* Wait for I_SYNC. This function drops i_lock... */
inode_sleep_on_writeback(inode);
/* Inode may be gone, start again */
+ spin_lock(&wb->list_lock);
continue;
}
inode->i_state |= I_SYNC;
@@ -1314,6 +1315,8 @@
.reason = reason,
};
+ if (sb->s_bdi == &noop_backing_dev_info)
+ return;
WARN_ON(!rwsem_is_locked(&sb->s_umount));
bdi_queue_work(sb->s_bdi, &work);
wait_for_completion(&done);
@@ -1397,6 +1400,9 @@
.reason = WB_REASON_SYNC,
};
+ /* Nothing to do? */
+ if (sb->s_bdi == &noop_backing_dev_info)
+ return;
WARN_ON(!rwsem_is_locked(&sb->s_umount));
bdi_queue_work(sb->s_bdi, &work);
diff --git a/fs/fs_struct.c b/fs/fs_struct.c
index e159e68..5df4775 100644
--- a/fs/fs_struct.c
+++ b/fs/fs_struct.c
@@ -6,18 +6,6 @@
#include <linux/fs_struct.h>
#include "internal.h"
-static inline void path_get_longterm(struct path *path)
-{
- path_get(path);
- mnt_make_longterm(path->mnt);
-}
-
-static inline void path_put_longterm(struct path *path)
-{
- mnt_make_shortterm(path->mnt);
- path_put(path);
-}
-
/*
* Replace the fs->{rootmnt,root} with {mnt,dentry}. Put the old values.
* It can block.
@@ -26,7 +14,7 @@
{
struct path old_root;
- path_get_longterm(path);
+ path_get(path);
spin_lock(&fs->lock);
write_seqcount_begin(&fs->seq);
old_root = fs->root;
@@ -34,7 +22,7 @@
write_seqcount_end(&fs->seq);
spin_unlock(&fs->lock);
if (old_root.dentry)
- path_put_longterm(&old_root);
+ path_put(&old_root);
}
/*
@@ -45,7 +33,7 @@
{
struct path old_pwd;
- path_get_longterm(path);
+ path_get(path);
spin_lock(&fs->lock);
write_seqcount_begin(&fs->seq);
old_pwd = fs->pwd;
@@ -54,7 +42,7 @@
spin_unlock(&fs->lock);
if (old_pwd.dentry)
- path_put_longterm(&old_pwd);
+ path_put(&old_pwd);
}
static inline int replace_path(struct path *p, const struct path *old, const struct path *new)
@@ -84,7 +72,7 @@
write_seqcount_end(&fs->seq);
while (hits--) {
count++;
- path_get_longterm(new_root);
+ path_get(new_root);
}
spin_unlock(&fs->lock);
}
@@ -92,13 +80,13 @@
} while_each_thread(g, p);
read_unlock(&tasklist_lock);
while (count--)
- path_put_longterm(old_root);
+ path_put(old_root);
}
void free_fs_struct(struct fs_struct *fs)
{
- path_put_longterm(&fs->root);
- path_put_longterm(&fs->pwd);
+ path_put(&fs->root);
+ path_put(&fs->pwd);
kmem_cache_free(fs_cachep, fs);
}
@@ -132,9 +120,9 @@
spin_lock(&old->lock);
fs->root = old->root;
- path_get_longterm(&fs->root);
+ path_get(&fs->root);
fs->pwd = old->pwd;
- path_get_longterm(&fs->pwd);
+ path_get(&fs->pwd);
spin_unlock(&old->lock);
}
return fs;
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 334e0b1..8964cf3 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -154,7 +154,7 @@
* the lookup once more. If the lookup results in the same inode,
* then refresh the attributes, timeouts and mark the dentry valid.
*/
-static int fuse_dentry_revalidate(struct dentry *entry, struct nameidata *nd)
+static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags)
{
struct inode *inode;
@@ -174,7 +174,7 @@
if (!inode)
return 0;
- if (nd && (nd->flags & LOOKUP_RCU))
+ if (flags & LOOKUP_RCU)
return -ECHILD;
fc = get_fuse_conn(inode);
@@ -249,7 +249,7 @@
/* This tries to shrink the subtree below alias */
fuse_invalidate_entry(alias);
dput(alias);
- if (!list_empty(&inode->i_dentry))
+ if (!hlist_empty(&inode->i_dentry))
return ERR_PTR(-EBUSY);
} else {
dput(alias);
@@ -316,7 +316,7 @@
}
static struct dentry *fuse_lookup(struct inode *dir, struct dentry *entry,
- struct nameidata *nd)
+ unsigned int flags)
{
int err;
struct fuse_entry_out outarg;
@@ -370,7 +370,8 @@
* 'mknod' + 'open' requests.
*/
static int fuse_create_open(struct inode *dir, struct dentry *entry,
- umode_t mode, struct nameidata *nd)
+ struct file *file, unsigned flags,
+ umode_t mode, int *opened)
{
int err;
struct inode *inode;
@@ -381,15 +382,11 @@
struct fuse_open_out outopen;
struct fuse_entry_out outentry;
struct fuse_file *ff;
- struct file *file;
- int flags = nd->intent.open.flags;
-
- if (fc->no_create)
- return -ENOSYS;
forget = fuse_alloc_forget();
+ err = -ENOMEM;
if (!forget)
- return -ENOMEM;
+ goto out_err;
req = fuse_get_req(fc);
err = PTR_ERR(req);
@@ -428,11 +425,8 @@
req->out.args[1].value = &outopen;
fuse_request_send(fc, req);
err = req->out.h.error;
- if (err) {
- if (err == -ENOSYS)
- fc->no_create = 1;
+ if (err)
goto out_free_ff;
- }
err = -EIO;
if (!S_ISREG(outentry.attr.mode) || invalid_nodeid(outentry.nodeid))
@@ -448,28 +442,74 @@
flags &= ~(O_CREAT | O_EXCL | O_TRUNC);
fuse_sync_release(ff, flags);
fuse_queue_forget(fc, forget, outentry.nodeid, 1);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto out_err;
}
kfree(forget);
d_instantiate(entry, inode);
fuse_change_entry_timeout(entry, &outentry);
fuse_invalidate_attr(dir);
- file = lookup_instantiate_filp(nd, entry, generic_file_open);
- if (IS_ERR(file)) {
+ err = finish_open(file, entry, generic_file_open, opened);
+ if (err) {
fuse_sync_release(ff, flags);
- return PTR_ERR(file);
+ } else {
+ file->private_data = fuse_file_get(ff);
+ fuse_finish_open(inode, file);
}
- file->private_data = fuse_file_get(ff);
- fuse_finish_open(inode, file);
- return 0;
-
- out_free_ff:
- fuse_file_free(ff);
- out_put_request:
- fuse_put_request(fc, req);
- out_put_forget_req:
- kfree(forget);
return err;
+
+out_free_ff:
+ fuse_file_free(ff);
+out_put_request:
+ fuse_put_request(fc, req);
+out_put_forget_req:
+ kfree(forget);
+out_err:
+ return err;
+}
+
+static int fuse_mknod(struct inode *, struct dentry *, umode_t, dev_t);
+static int fuse_atomic_open(struct inode *dir, struct dentry *entry,
+ struct file *file, unsigned flags,
+ umode_t mode, int *opened)
+{
+ int err;
+ struct fuse_conn *fc = get_fuse_conn(dir);
+ struct dentry *res = NULL;
+
+ if (d_unhashed(entry)) {
+ res = fuse_lookup(dir, entry, 0);
+ if (IS_ERR(res))
+ return PTR_ERR(res);
+
+ if (res)
+ entry = res;
+ }
+
+ if (!(flags & O_CREAT) || entry->d_inode)
+ goto no_open;
+
+ /* Only creates */
+ *opened |= FILE_CREATED;
+
+ if (fc->no_create)
+ goto mknod;
+
+ err = fuse_create_open(dir, entry, file, flags, mode, opened);
+ if (err == -ENOSYS) {
+ fc->no_create = 1;
+ goto mknod;
+ }
+out_dput:
+ dput(res);
+ return err;
+
+mknod:
+ err = fuse_mknod(dir, entry, mode, 0);
+ if (err)
+ goto out_dput;
+no_open:
+ return finish_no_open(file, res);
}
/*
@@ -571,14 +611,8 @@
}
static int fuse_create(struct inode *dir, struct dentry *entry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
- if (nd) {
- int err = fuse_create_open(dir, entry, mode, nd);
- if (err != -ENOSYS)
- return err;
- /* Fall back on mknod */
- }
return fuse_mknod(dir, entry, mode, 0);
}
@@ -1646,6 +1680,7 @@
.link = fuse_link,
.setattr = fuse_setattr,
.create = fuse_create,
+ .atomic_open = fuse_atomic_open,
.mknod = fuse_mknod,
.permission = fuse_permission,
.getattr = fuse_getattr,
diff --git a/fs/gfs2/dentry.c b/fs/gfs2/dentry.c
index 0da8da2..4fddb3c 100644
--- a/fs/gfs2/dentry.c
+++ b/fs/gfs2/dentry.c
@@ -25,7 +25,7 @@
/**
* gfs2_drevalidate - Check directory lookup consistency
* @dentry: the mapping to check
- * @nd:
+ * @flags: lookup flags
*
* Check to make sure the lookup necessary to arrive at this inode from its
* parent is still good.
@@ -33,7 +33,7 @@
* Returns: 1 if the dentry is ok, 0 if it isn't
*/
-static int gfs2_drevalidate(struct dentry *dentry, struct nameidata *nd)
+static int gfs2_drevalidate(struct dentry *dentry, unsigned int flags)
{
struct dentry *parent;
struct gfs2_sbd *sdp;
@@ -44,7 +44,7 @@
int error;
int had_lock = 0;
- if (nd && nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
parent = dget_parent(dentry);
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index a9ba244..8676747 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -755,11 +755,8 @@
*/
static int gfs2_create(struct inode *dir, struct dentry *dentry,
- umode_t mode, struct nameidata *nd)
+ umode_t mode, bool excl)
{
- int excl = 0;
- if (nd && (nd->flags & LOOKUP_EXCL))
- excl = 1;
return gfs2_create_inode(dir, dentry, S_IFREG | mode, 0, NULL, 0, excl);
}
@@ -775,7 +772,7 @@
*/
static struct dentry *gfs2_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct inode *inode = gfs2_lookupi(dir, &dentry->d_name, 0);
if (inode && !IS_ERR(inode)) {
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index b8c250f..6c90607 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -1286,7 +1286,7 @@
error = -EBUSY;
goto error_bdev;
}
- s = sget(fs_type, test_gfs2_super, set_gfs2_super, bdev);
+ s = sget(fs_type, test_gfs2_super, set_gfs2_super, flags, bdev);
mutex_unlock(&bdev->bd_fsfreeze_mutex);
error = PTR_ERR(s);
if (IS_ERR(s))
@@ -1316,7 +1316,6 @@
} else {
char b[BDEVNAME_SIZE];
- s->s_flags = flags;
s->s_mode = mode;
strlcpy(s->s_id, bdevname(bdev, b), sizeof(s->s_id));
sb_set_blocksize(s, block_size(bdev));
@@ -1360,7 +1359,7 @@
dev_name, error);
return ERR_PTR(error);
}
- s = sget(&gfs2_fs_type, test_gfs2_super, set_meta_super,
+ s = sget(&gfs2_fs_type, test_gfs2_super, set_meta_super, flags,
path.dentry->d_inode->i_sb->s_bdev);
path_put(&path);
if (IS_ERR(s)) {
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index b97178e..27b5cc7 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -1108,7 +1108,7 @@
}
}
-int gfs2_quota_sync(struct super_block *sb, int type, int wait)
+int gfs2_quota_sync(struct super_block *sb, int type)
{
struct gfs2_sbd *sdp = sb->s_fs_info;
struct gfs2_quota_data **qda;
@@ -1154,7 +1154,7 @@
static int gfs2_quota_sync_timeo(struct super_block *sb, int type)
{
- return gfs2_quota_sync(sb, type, 0);
+ return gfs2_quota_sync(sb, type);
}
int gfs2_quota_refresh(struct gfs2_sbd *sdp, int user, u32 id)
diff --git a/fs/gfs2/quota.h b/fs/gfs2/quota.h
index 90bf1c3..f25d98b 100644
--- a/fs/gfs2/quota.h
+++ b/fs/gfs2/quota.h
@@ -26,7 +26,7 @@
extern void gfs2_quota_change(struct gfs2_inode *ip, s64 change,
u32 uid, u32 gid);
-extern int gfs2_quota_sync(struct super_block *sb, int type, int wait);
+extern int gfs2_quota_sync(struct super_block *sb, int type);
extern int gfs2_quota_refresh(struct gfs2_sbd *sdp, int user, u32 id);
extern int gfs2_quota_init(struct gfs2_sbd *sdp);
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 713e621..f3d6bbf 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -838,7 +838,7 @@
int error;
flush_workqueue(gfs2_delete_workqueue);
- gfs2_quota_sync(sdp->sd_vfs, 0, 1);
+ gfs2_quota_sync(sdp->sd_vfs, 0);
gfs2_statfs_sync(sdp->sd_vfs, 0);
error = gfs2_glock_nq_init(sdp->sd_trans_gl, LM_ST_SHARED, GL_NOCACHE,
@@ -952,6 +952,8 @@
static int gfs2_sync_fs(struct super_block *sb, int wait)
{
struct gfs2_sbd *sdp = sb->s_fs_info;
+
+ gfs2_quota_sync(sb, -1);
if (wait && sdp)
gfs2_log_flush(sdp, NULL);
return 0;
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index 9c2592b..73ecc34 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -168,7 +168,7 @@
if (simple_strtol(buf, NULL, 0) != 1)
return -EINVAL;
- gfs2_quota_sync(sdp->sd_vfs, 0, 1);
+ gfs2_quota_sync(sdp->sd_vfs, 0);
return len;
}
diff --git a/fs/hfs/dir.c b/fs/hfs/dir.c
index 62fc14e..422dde2 100644
--- a/fs/hfs/dir.c
+++ b/fs/hfs/dir.c
@@ -18,7 +18,7 @@
* hfs_lookup()
*/
static struct dentry *hfs_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
hfs_cat_rec rec;
struct hfs_find_data fd;
@@ -187,7 +187,7 @@
* the directory and the name (and its length) of the new file.
*/
static int hfs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
struct inode *inode;
int res;
diff --git a/fs/hfs/extent.c b/fs/hfs/extent.c
index 2c16316..a67955a 100644
--- a/fs/hfs/extent.c
+++ b/fs/hfs/extent.c
@@ -432,7 +432,7 @@
if (inode->i_ino < HFS_FIRSTUSER_CNID)
set_bit(HFS_FLG_ALT_MDB_DIRTY, &HFS_SB(sb)->flags);
set_bit(HFS_FLG_MDB_DIRTY, &HFS_SB(sb)->flags);
- sb->s_dirt = 1;
+ hfs_mark_mdb_dirty(sb);
}
return res;
diff --git a/fs/hfs/hfs_fs.h b/fs/hfs/hfs_fs.h
index 1bf967c..8275175 100644
--- a/fs/hfs/hfs_fs.h
+++ b/fs/hfs/hfs_fs.h
@@ -14,6 +14,7 @@
#include <linux/mutex.h>
#include <linux/buffer_head.h>
#include <linux/fs.h>
+#include <linux/workqueue.h>
#include <asm/byteorder.h>
#include <asm/uaccess.h>
@@ -137,16 +138,15 @@
gid_t s_gid; /* The gid of all files */
int session, part;
-
struct nls_table *nls_io, *nls_disk;
-
struct mutex bitmap_lock;
-
unsigned long flags;
-
u16 blockoffset;
-
int fs_div;
+ struct super_block *sb;
+ int work_queued; /* non-zero delayed work is queued */
+ struct delayed_work mdb_work; /* MDB flush delayed work */
+ spinlock_t work_lock; /* protects mdb_work and work_queued */
};
#define HFS_FLG_BITMAP_DIRTY 0
@@ -226,6 +226,9 @@
extern void hfs_asc2mac(struct super_block *, struct hfs_name *, struct qstr *);
extern int hfs_mac2asc(struct super_block *, char *, const struct hfs_name *);
+/* super.c */
+extern void hfs_mark_mdb_dirty(struct super_block *sb);
+
extern struct timezone sys_tz;
/*
@@ -253,7 +256,7 @@
static inline void hfs_bitmap_dirty(struct super_block *sb)
{
set_bit(HFS_FLG_BITMAP_DIRTY, &HFS_SB(sb)->flags);
- sb->s_dirt = 1;
+ hfs_mark_mdb_dirty(sb);
}
#define sb_bread512(sb, sec, data) ({ \
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index 761ec06..ee1bc55 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -220,7 +220,7 @@
insert_inode_hash(inode);
mark_inode_dirty(inode);
set_bit(HFS_FLG_MDB_DIRTY, &HFS_SB(sb)->flags);
- sb->s_dirt = 1;
+ hfs_mark_mdb_dirty(sb);
return inode;
}
@@ -235,7 +235,7 @@
if (HFS_I(inode)->cat_key.ParID == cpu_to_be32(HFS_ROOT_CNID))
HFS_SB(sb)->root_dirs--;
set_bit(HFS_FLG_MDB_DIRTY, &HFS_SB(sb)->flags);
- sb->s_dirt = 1;
+ hfs_mark_mdb_dirty(sb);
return;
}
HFS_SB(sb)->file_count--;
@@ -248,7 +248,7 @@
}
}
set_bit(HFS_FLG_MDB_DIRTY, &HFS_SB(sb)->flags);
- sb->s_dirt = 1;
+ hfs_mark_mdb_dirty(sb);
}
void hfs_inode_read_fork(struct inode *inode, struct hfs_extent *ext,
@@ -489,7 +489,7 @@
}
static struct dentry *hfs_file_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct inode *inode = NULL;
hfs_cat_rec rec;
@@ -644,13 +644,7 @@
/* sync the superblock to buffers */
sb = inode->i_sb;
- if (sb->s_dirt) {
- lock_super(sb);
- sb->s_dirt = 0;
- if (!(sb->s_flags & MS_RDONLY))
- hfs_mdb_commit(sb);
- unlock_super(sb);
- }
+ flush_delayed_work_sync(&HFS_SB(sb)->mdb_work);
/* .. finally sync the buffers to disk */
err = sync_blockdev(sb->s_bdev);
if (!ret)
diff --git a/fs/hfs/mdb.c b/fs/hfs/mdb.c
index 1563d5c..5fd51a5 100644
--- a/fs/hfs/mdb.c
+++ b/fs/hfs/mdb.c
@@ -260,6 +260,10 @@
{
struct hfs_mdb *mdb = HFS_SB(sb)->mdb;
+ if (sb->s_flags & MS_RDONLY)
+ return;
+
+ lock_buffer(HFS_SB(sb)->mdb_bh);
if (test_and_clear_bit(HFS_FLG_MDB_DIRTY, &HFS_SB(sb)->flags)) {
/* These parameters may have been modified, so write them back */
mdb->drLsMod = hfs_mtime();
@@ -283,9 +287,13 @@
&mdb->drXTFlSize, NULL);
hfs_inode_write_fork(HFS_SB(sb)->cat_tree->inode, mdb->drCTExtRec,
&mdb->drCTFlSize, NULL);
+
+ lock_buffer(HFS_SB(sb)->alt_mdb_bh);
memcpy(HFS_SB(sb)->alt_mdb, HFS_SB(sb)->mdb, HFS_SECTOR_SIZE);
HFS_SB(sb)->alt_mdb->drAtrb |= cpu_to_be16(HFS_SB_ATTRIB_UNMNT);
HFS_SB(sb)->alt_mdb->drAtrb &= cpu_to_be16(~HFS_SB_ATTRIB_INCNSTNT);
+ unlock_buffer(HFS_SB(sb)->alt_mdb_bh);
+
mark_buffer_dirty(HFS_SB(sb)->alt_mdb_bh);
sync_dirty_buffer(HFS_SB(sb)->alt_mdb_bh);
}
@@ -308,7 +316,11 @@
break;
}
len = min((int)sb->s_blocksize - off, size);
+
+ lock_buffer(bh);
memcpy(bh->b_data + off, ptr, len);
+ unlock_buffer(bh);
+
mark_buffer_dirty(bh);
brelse(bh);
block++;
@@ -317,6 +329,7 @@
size -= len;
}
}
+ unlock_buffer(HFS_SB(sb)->mdb_bh);
}
void hfs_mdb_close(struct super_block *sb)
diff --git a/fs/hfs/super.c b/fs/hfs/super.c
index 7b4c537..4eb873e 100644
--- a/fs/hfs/super.c
+++ b/fs/hfs/super.c
@@ -29,43 +29,9 @@
MODULE_LICENSE("GPL");
-/*
- * hfs_write_super()
- *
- * Description:
- * This function is called by the VFS only. When the filesystem
- * is mounted r/w it updates the MDB on disk.
- * Input Variable(s):
- * struct super_block *sb: Pointer to the hfs superblock
- * Output Variable(s):
- * NONE
- * Returns:
- * void
- * Preconditions:
- * 'sb' points to a "valid" (struct super_block).
- * Postconditions:
- * The MDB is marked 'unsuccessfully unmounted' by clearing bit 8 of drAtrb
- * (hfs_put_super() must set this flag!). Some MDB fields are updated
- * and the MDB buffer is written to disk by calling hfs_mdb_commit().
- */
-static void hfs_write_super(struct super_block *sb)
-{
- lock_super(sb);
- sb->s_dirt = 0;
-
- /* sync everything to the buffers */
- if (!(sb->s_flags & MS_RDONLY))
- hfs_mdb_commit(sb);
- unlock_super(sb);
-}
-
static int hfs_sync_fs(struct super_block *sb, int wait)
{
- lock_super(sb);
hfs_mdb_commit(sb);
- sb->s_dirt = 0;
- unlock_super(sb);
-
return 0;
}
@@ -78,13 +44,44 @@
*/
static void hfs_put_super(struct super_block *sb)
{
- if (sb->s_dirt)
- hfs_write_super(sb);
+ cancel_delayed_work_sync(&HFS_SB(sb)->mdb_work);
hfs_mdb_close(sb);
/* release the MDB's resources */
hfs_mdb_put(sb);
}
+static void flush_mdb(struct work_struct *work)
+{
+ struct hfs_sb_info *sbi;
+ struct super_block *sb;
+
+ sbi = container_of(work, struct hfs_sb_info, mdb_work.work);
+ sb = sbi->sb;
+
+ spin_lock(&sbi->work_lock);
+ sbi->work_queued = 0;
+ spin_unlock(&sbi->work_lock);
+
+ hfs_mdb_commit(sb);
+}
+
+void hfs_mark_mdb_dirty(struct super_block *sb)
+{
+ struct hfs_sb_info *sbi = HFS_SB(sb);
+ unsigned long delay;
+
+ if (sb->s_flags & MS_RDONLY)
+ return;
+
+ spin_lock(&sbi->work_lock);
+ if (!sbi->work_queued) {
+ delay = msecs_to_jiffies(dirty_writeback_interval * 10);
+ queue_delayed_work(system_long_wq, &sbi->mdb_work, delay);
+ sbi->work_queued = 1;
+ }
+ spin_unlock(&sbi->work_lock);
+}
+
/*
* hfs_statfs()
*
@@ -184,7 +181,6 @@
.write_inode = hfs_write_inode,
.evict_inode = hfs_evict_inode,
.put_super = hfs_put_super,
- .write_super = hfs_write_super,
.sync_fs = hfs_sync_fs,
.statfs = hfs_statfs,
.remount_fs = hfs_remount,
@@ -387,7 +383,10 @@
if (!sbi)
return -ENOMEM;
+ sbi->sb = sb;
sb->s_fs_info = sbi;
+ spin_lock_init(&sbi->work_lock);
+ INIT_DELAYED_WORK(&sbi->mdb_work, flush_mdb);
res = -EINVAL;
if (!parse_options((char *)data, sbi)) {
diff --git a/fs/hfs/sysdep.c b/fs/hfs/sysdep.c
index 19cf291..91b91fd 100644
--- a/fs/hfs/sysdep.c
+++ b/fs/hfs/sysdep.c
@@ -13,12 +13,12 @@
/* dentry case-handling: just lowercase everything */
-static int hfs_revalidate_dentry(struct dentry *dentry, struct nameidata *nd)
+static int hfs_revalidate_dentry(struct dentry *dentry, unsigned int flags)
{
struct inode *inode;
int diff;
- if (nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
inode = dentry->d_inode;
diff --git a/fs/hfsplus/bitmap.c b/fs/hfsplus/bitmap.c
index 1cad80c..4cfbe2e 100644
--- a/fs/hfsplus/bitmap.c
+++ b/fs/hfsplus/bitmap.c
@@ -153,7 +153,7 @@
kunmap(page);
*max = offset + (curr - pptr) * 32 + i - start;
sbi->free_blocks -= *max;
- sb->s_dirt = 1;
+ hfsplus_mark_mdb_dirty(sb);
dprint(DBG_BITMAP, "-> %u,%u\n", start, *max);
out:
mutex_unlock(&sbi->alloc_mutex);
@@ -228,7 +228,7 @@
set_page_dirty(page);
kunmap(page);
sbi->free_blocks += len;
- sb->s_dirt = 1;
+ hfsplus_mark_mdb_dirty(sb);
mutex_unlock(&sbi->alloc_mutex);
return 0;
diff --git a/fs/hfsplus/dir.c b/fs/hfsplus/dir.c
index 26b53fb..6b9f921 100644
--- a/fs/hfsplus/dir.c
+++ b/fs/hfsplus/dir.c
@@ -25,7 +25,7 @@
/* Find the entry inside dir named dentry->d_name */
static struct dentry *hfsplus_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct inode *inode = NULL;
struct hfs_find_data fd;
@@ -316,7 +316,7 @@
inode->i_ctime = CURRENT_TIME_SEC;
mark_inode_dirty(inode);
sbi->file_count++;
- dst_dir->i_sb->s_dirt = 1;
+ hfsplus_mark_mdb_dirty(dst_dir->i_sb);
out:
mutex_unlock(&sbi->vh_mutex);
return res;
@@ -465,7 +465,7 @@
}
static int hfsplus_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
return hfsplus_mknod(dir, dentry, mode, 0);
}
diff --git a/fs/hfsplus/hfsplus_fs.h b/fs/hfsplus/hfsplus_fs.h
index 4e75ac6..558dbb4 100644
--- a/fs/hfsplus/hfsplus_fs.h
+++ b/fs/hfsplus/hfsplus_fs.h
@@ -153,8 +153,11 @@
gid_t gid;
int part, session;
-
unsigned long flags;
+
+ int work_queued; /* non-zero delayed work is queued */
+ struct delayed_work sync_work; /* FS sync delayed work */
+ spinlock_t work_lock; /* protects sync_work and work_queued */
};
#define HFSPLUS_SB_WRITEBACKUP 0
@@ -428,7 +431,7 @@
/* super.c */
struct inode *hfsplus_iget(struct super_block *, unsigned long);
-int hfsplus_sync_fs(struct super_block *sb, int wait);
+void hfsplus_mark_mdb_dirty(struct super_block *sb);
/* tables.c */
extern u16 hfsplus_case_fold_table[];
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index 82b69ee..3d8b4a6 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -168,7 +168,7 @@
};
static struct dentry *hfsplus_file_lookup(struct inode *dir,
- struct dentry *dentry, struct nameidata *nd)
+ struct dentry *dentry, unsigned int flags)
{
struct hfs_find_data fd;
struct super_block *sb = dir->i_sb;
@@ -431,7 +431,7 @@
sbi->file_count++;
insert_inode_hash(inode);
mark_inode_dirty(inode);
- sb->s_dirt = 1;
+ hfsplus_mark_mdb_dirty(sb);
return inode;
}
@@ -442,7 +442,7 @@
if (S_ISDIR(inode->i_mode)) {
HFSPLUS_SB(sb)->folder_count--;
- sb->s_dirt = 1;
+ hfsplus_mark_mdb_dirty(sb);
return;
}
HFSPLUS_SB(sb)->file_count--;
@@ -455,7 +455,7 @@
inode->i_size = 0;
hfsplus_file_truncate(inode);
}
- sb->s_dirt = 1;
+ hfsplus_mark_mdb_dirty(sb);
}
void hfsplus_inode_read_fork(struct inode *inode, struct hfsplus_fork_raw *fork)
diff --git a/fs/hfsplus/ioctl.c b/fs/hfsplus/ioctl.c
index c640ba5..09addc8 100644
--- a/fs/hfsplus/ioctl.c
+++ b/fs/hfsplus/ioctl.c
@@ -31,6 +31,7 @@
struct hfsplus_sb_info *sbi = HFSPLUS_SB(inode->i_sb);
struct hfsplus_vh *vh = sbi->s_vhdr;
struct hfsplus_vh *bvh = sbi->s_backup_vhdr;
+ u32 cnid = (unsigned long)dentry->d_fsdata;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
@@ -41,8 +42,12 @@
vh->finder_info[0] = bvh->finder_info[0] =
cpu_to_be32(parent_ino(dentry));
- /* Bootloader */
- vh->finder_info[1] = bvh->finder_info[1] = cpu_to_be32(inode->i_ino);
+ /*
+ * Bootloader. Just using the inode here breaks in the case of
+ * hard links - the firmware wants the ID of the hard link file,
+ * but the inode points at the indirect inode
+ */
+ vh->finder_info[1] = bvh->finder_info[1] = cpu_to_be32(cnid);
/* Per spec, the OS X system folder - same as finder_info[0] here */
vh->finder_info[5] = bvh->finder_info[5] =
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index a9bca4b..47333209 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -124,7 +124,7 @@
if (fork->total_size != cpu_to_be64(inode->i_size)) {
set_bit(HFSPLUS_SB_WRITEBACKUP, &sbi->flags);
- inode->i_sb->s_dirt = 1;
+ hfsplus_mark_mdb_dirty(inode->i_sb);
}
hfsplus_inode_write_fork(inode, fork);
if (tree)
@@ -161,7 +161,7 @@
}
}
-int hfsplus_sync_fs(struct super_block *sb, int wait)
+static int hfsplus_sync_fs(struct super_block *sb, int wait)
{
struct hfsplus_sb_info *sbi = HFSPLUS_SB(sb);
struct hfsplus_vh *vhdr = sbi->s_vhdr;
@@ -171,9 +171,7 @@
if (!wait)
return 0;
- dprint(DBG_SUPER, "hfsplus_write_super\n");
-
- sb->s_dirt = 0;
+ dprint(DBG_SUPER, "hfsplus_sync_fs\n");
/*
* Explicitly write out the special metadata inodes.
@@ -226,12 +224,34 @@
return error;
}
-static void hfsplus_write_super(struct super_block *sb)
+static void delayed_sync_fs(struct work_struct *work)
{
- if (!(sb->s_flags & MS_RDONLY))
- hfsplus_sync_fs(sb, 1);
- else
- sb->s_dirt = 0;
+ struct hfsplus_sb_info *sbi;
+
+ sbi = container_of(work, struct hfsplus_sb_info, sync_work.work);
+
+ spin_lock(&sbi->work_lock);
+ sbi->work_queued = 0;
+ spin_unlock(&sbi->work_lock);
+
+ hfsplus_sync_fs(sbi->alloc_file->i_sb, 1);
+}
+
+void hfsplus_mark_mdb_dirty(struct super_block *sb)
+{
+ struct hfsplus_sb_info *sbi = HFSPLUS_SB(sb);
+ unsigned long delay;
+
+ if (sb->s_flags & MS_RDONLY)
+ return;
+
+ spin_lock(&sbi->work_lock);
+ if (!sbi->work_queued) {
+ delay = msecs_to_jiffies(dirty_writeback_interval * 10);
+ queue_delayed_work(system_long_wq, &sbi->sync_work, delay);
+ sbi->work_queued = 1;
+ }
+ spin_unlock(&sbi->work_lock);
}
static void hfsplus_put_super(struct super_block *sb)
@@ -240,8 +260,7 @@
dprint(DBG_SUPER, "hfsplus_put_super\n");
- if (!sb->s_fs_info)
- return;
+ cancel_delayed_work_sync(&sbi->sync_work);
if (!(sb->s_flags & MS_RDONLY) && sbi->s_vhdr) {
struct hfsplus_vh *vhdr = sbi->s_vhdr;
@@ -328,7 +347,6 @@
.write_inode = hfsplus_write_inode,
.evict_inode = hfsplus_evict_inode,
.put_super = hfsplus_put_super,
- .write_super = hfsplus_write_super,
.sync_fs = hfsplus_sync_fs,
.statfs = hfsplus_statfs,
.remount_fs = hfsplus_remount,
@@ -355,6 +373,8 @@
sb->s_fs_info = sbi;
mutex_init(&sbi->alloc_mutex);
mutex_init(&sbi->vh_mutex);
+ spin_lock_init(&sbi->work_lock);
+ INIT_DELAYED_WORK(&sbi->sync_work, delayed_sync_fs);
hfsplus_fill_defaults(sbi);
err = -EINVAL;
diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c
index 7daf4b8..90effcc 100644
--- a/fs/hfsplus/wrapper.c
+++ b/fs/hfsplus/wrapper.c
@@ -56,7 +56,7 @@
DECLARE_COMPLETION_ONSTACK(wait);
struct bio *bio;
int ret = 0;
- unsigned int io_size;
+ u64 io_size;
loff_t start;
int offset;
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 2afa5bb..1241465 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -553,7 +553,7 @@
}
int hostfs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
struct inode *inode;
char *name;
@@ -595,7 +595,7 @@
}
struct dentry *hostfs_lookup(struct inode *ino, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct inode *inode;
char *name;
diff --git a/fs/hpfs/dir.c b/fs/hpfs/dir.c
index b8472f8..78e12b2 100644
--- a/fs/hpfs/dir.c
+++ b/fs/hpfs/dir.c
@@ -189,7 +189,7 @@
* to tell read_inode to read fnode or not.
*/
-struct dentry *hpfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
+struct dentry *hpfs_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
{
const unsigned char *name = dentry->d_name.name;
unsigned len = dentry->d_name.len;
diff --git a/fs/hpfs/hpfs_fn.h b/fs/hpfs/hpfs_fn.h
index c07ef1f..ac1ead1 100644
--- a/fs/hpfs/hpfs_fn.h
+++ b/fs/hpfs/hpfs_fn.h
@@ -220,7 +220,7 @@
/* dir.c */
-struct dentry *hpfs_lookup(struct inode *, struct dentry *, struct nameidata *);
+struct dentry *hpfs_lookup(struct inode *, struct dentry *, unsigned int);
extern const struct file_operations hpfs_dir_ops;
/* dnode.c */
diff --git a/fs/hpfs/namei.c b/fs/hpfs/namei.c
index 9083ef8..bc90824 100644
--- a/fs/hpfs/namei.c
+++ b/fs/hpfs/namei.c
@@ -115,7 +115,7 @@
return err;
}
-static int hpfs_create(struct inode *dir, struct dentry *dentry, umode_t mode, struct nameidata *nd)
+static int hpfs_create(struct inode *dir, struct dentry *dentry, umode_t mode, bool excl)
{
const unsigned char *name = dentry->d_name.name;
unsigned len = dentry->d_name.len;
diff --git a/fs/hppfs/hppfs.c b/fs/hppfs/hppfs.c
index d4f93b5..c1dffe4 100644
--- a/fs/hppfs/hppfs.c
+++ b/fs/hppfs/hppfs.c
@@ -138,7 +138,7 @@
}
static struct dentry *hppfs_lookup(struct inode *ino, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct dentry *proc_dentry, *parent;
struct qstr *name = &dentry->d_name;
@@ -420,8 +420,7 @@
{
const struct cred *cred = file->f_cred;
struct hppfs_private *data;
- struct vfsmount *proc_mnt;
- struct dentry *proc_dentry;
+ struct path path;
char *host_file;
int err, fd, type, filter;
@@ -434,12 +433,11 @@
if (host_file == NULL)
goto out_free2;
- proc_dentry = HPPFS_I(inode)->proc_dentry;
- proc_mnt = inode->i_sb->s_fs_info;
+ path.mnt = inode->i_sb->s_fs_info;
+ path.dentry = HPPFS_I(inode)->proc_dentry;
/* XXX This isn't closed anywhere */
- data->proc_file = dentry_open(dget(proc_dentry), mntget(proc_mnt),
- file_mode(file->f_mode), cred);
+ data->proc_file = dentry_open(&path, file_mode(file->f_mode), cred);
err = PTR_ERR(data->proc_file);
if (IS_ERR(data->proc_file))
goto out_free1;
@@ -484,8 +482,7 @@
{
const struct cred *cred = file->f_cred;
struct hppfs_private *data;
- struct vfsmount *proc_mnt;
- struct dentry *proc_dentry;
+ struct path path;
int err;
err = -ENOMEM;
@@ -493,10 +490,9 @@
if (data == NULL)
goto out;
- proc_dentry = HPPFS_I(inode)->proc_dentry;
- proc_mnt = inode->i_sb->s_fs_info;
- data->proc_file = dentry_open(dget(proc_dentry), mntget(proc_mnt),
- file_mode(file->f_mode), cred);
+ path.mnt = inode->i_sb->s_fs_info;
+ path.dentry = HPPFS_I(inode)->proc_dentry;
+ data->proc_file = dentry_open(&path, file_mode(file->f_mode), cred);
err = PTR_ERR(data->proc_file);
if (IS_ERR(data->proc_file))
goto out_free;
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index cc9281b..e13e9bd 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -565,7 +565,7 @@
return retval;
}
-static int hugetlbfs_create(struct inode *dir, struct dentry *dentry, umode_t mode, struct nameidata *nd)
+static int hugetlbfs_create(struct inode *dir, struct dentry *dentry, umode_t mode, bool excl)
{
return hugetlbfs_mknod(dir, dentry, mode | S_IFREG, 0);
}
diff --git a/fs/inode.c b/fs/inode.c
index c99163b..775cbab 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -182,7 +182,7 @@
}
inode->i_private = NULL;
inode->i_mapping = mapping;
- INIT_LIST_HEAD(&inode->i_dentry); /* buggered by rcu freeing */
+ INIT_HLIST_HEAD(&inode->i_dentry); /* buggered by rcu freeing */
#ifdef CONFIG_FS_POSIX_ACL
inode->i_acl = inode->i_default_acl = ACL_NOT_CACHED;
#endif
diff --git a/fs/internal.h b/fs/internal.h
index 18bc216..a6fd56c6 100644
--- a/fs/internal.h
+++ b/fs/internal.h
@@ -42,6 +42,11 @@
extern void __init chrdev_init(void);
/*
+ * namei.c
+ */
+extern int __inode_permission(struct inode *, int);
+
+/*
* namespace.c
*/
extern int copy_mount_options(const void __user *, unsigned long *);
@@ -50,8 +55,6 @@
extern struct vfsmount *lookup_mnt(struct path *);
extern int finish_automount(struct vfsmount *, struct path *);
-extern void mnt_make_longterm(struct vfsmount *);
-extern void mnt_make_shortterm(struct vfsmount *);
extern int sb_prepare_remount_readonly(struct super_block *);
extern void __init mnt_init(void);
@@ -84,9 +87,6 @@
/*
* open.c
*/
-struct nameidata;
-extern struct file *nameidata_to_filp(struct nameidata *);
-extern void release_open_intent(struct nameidata *);
struct open_flags {
int open_flag;
umode_t mode;
diff --git a/fs/isofs/isofs.h b/fs/isofs/isofs.h
index 0e73f63..3620ad1 100644
--- a/fs/isofs/isofs.h
+++ b/fs/isofs/isofs.h
@@ -114,7 +114,7 @@
int get_joliet_filename(struct iso_directory_record *, unsigned char *, struct inode *);
int get_acorn_filename(struct iso_directory_record *, char *, struct inode *);
-extern struct dentry *isofs_lookup(struct inode *, struct dentry *, struct nameidata *);
+extern struct dentry *isofs_lookup(struct inode *, struct dentry *, unsigned int flags);
extern struct buffer_head *isofs_bread(struct inode *, sector_t);
extern int isofs_get_blocks(struct inode *, sector_t, struct buffer_head **, unsigned long);
diff --git a/fs/isofs/namei.c b/fs/isofs/namei.c
index 1e2946f..c167028 100644
--- a/fs/isofs/namei.c
+++ b/fs/isofs/namei.c
@@ -163,7 +163,7 @@
return 0;
}
-struct dentry *isofs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
+struct dentry *isofs_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
{
int found;
unsigned long uninitialized_var(block);
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index b560188..ad7774d 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -25,9 +25,9 @@
static int jffs2_readdir (struct file *, void *, filldir_t);
static int jffs2_create (struct inode *,struct dentry *,umode_t,
- struct nameidata *);
+ bool);
static struct dentry *jffs2_lookup (struct inode *,struct dentry *,
- struct nameidata *);
+ unsigned int);
static int jffs2_link (struct dentry *,struct inode *,struct dentry *);
static int jffs2_unlink (struct inode *,struct dentry *);
static int jffs2_symlink (struct inode *,struct dentry *,const char *);
@@ -74,7 +74,7 @@
nice and simple
*/
static struct dentry *jffs2_lookup(struct inode *dir_i, struct dentry *target,
- struct nameidata *nd)
+ unsigned int flags)
{
struct jffs2_inode_info *dir_f;
struct jffs2_full_dirent *fd = NULL, *fd_list;
@@ -175,7 +175,7 @@
static int jffs2_create(struct inode *dir_i, struct dentry *dentry,
- umode_t mode, struct nameidata *nd)
+ umode_t mode, bool excl)
{
struct jffs2_raw_inode *ri;
struct jffs2_inode_info *f, *dir_f;
@@ -226,8 +226,8 @@
__func__, inode->i_ino, inode->i_mode, inode->i_nlink,
f->inocache->pino_nlink, inode->i_mapping->nrpages);
- d_instantiate(dentry, inode);
unlock_new_inode(inode);
+ d_instantiate(dentry, inode);
return 0;
fail:
@@ -446,8 +446,8 @@
mutex_unlock(&dir_f->sem);
jffs2_complete_reservation(c);
- d_instantiate(dentry, inode);
unlock_new_inode(inode);
+ d_instantiate(dentry, inode);
return 0;
fail:
@@ -591,8 +591,8 @@
mutex_unlock(&dir_f->sem);
jffs2_complete_reservation(c);
- d_instantiate(dentry, inode);
unlock_new_inode(inode);
+ d_instantiate(dentry, inode);
return 0;
fail:
@@ -766,8 +766,8 @@
mutex_unlock(&dir_f->sem);
jffs2_complete_reservation(c);
- d_instantiate(dentry, inode);
unlock_new_inode(inode);
+ d_instantiate(dentry, inode);
return 0;
fail:
diff --git a/fs/jfs/namei.c b/fs/jfs/namei.c
index 07c91ca..3b91a7a 100644
--- a/fs/jfs/namei.c
+++ b/fs/jfs/namei.c
@@ -73,7 +73,7 @@
*
*/
static int jfs_create(struct inode *dip, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
int rc = 0;
tid_t tid; /* transaction id */
@@ -176,8 +176,8 @@
unlock_new_inode(ip);
iput(ip);
} else {
- d_instantiate(dentry, ip);
unlock_new_inode(ip);
+ d_instantiate(dentry, ip);
}
out2:
@@ -309,8 +309,8 @@
unlock_new_inode(ip);
iput(ip);
} else {
- d_instantiate(dentry, ip);
unlock_new_inode(ip);
+ d_instantiate(dentry, ip);
}
out2:
@@ -1043,8 +1043,8 @@
unlock_new_inode(ip);
iput(ip);
} else {
- d_instantiate(dentry, ip);
unlock_new_inode(ip);
+ d_instantiate(dentry, ip);
}
out2:
@@ -1424,8 +1424,8 @@
unlock_new_inode(ip);
iput(ip);
} else {
- d_instantiate(dentry, ip);
unlock_new_inode(ip);
+ d_instantiate(dentry, ip);
}
out1:
@@ -1436,7 +1436,7 @@
return rc;
}
-static struct dentry *jfs_lookup(struct inode *dip, struct dentry *dentry, struct nameidata *nd)
+static struct dentry *jfs_lookup(struct inode *dip, struct dentry *dentry, unsigned int flags)
{
struct btstack btstack;
ino_t inum;
@@ -1570,7 +1570,7 @@
return result;
}
-static int jfs_ci_revalidate(struct dentry *dentry, struct nameidata *nd)
+static int jfs_ci_revalidate(struct dentry *dentry, unsigned int flags)
{
/*
* This is not negative dentry. Always valid.
@@ -1589,7 +1589,7 @@
* This may be nfsd (or something), anyway, we can't see the
* intent of this. So, since this can be for creation, drop it.
*/
- if (!nd)
+ if (!flags)
return 0;
/*
@@ -1597,7 +1597,7 @@
* case sensitive name which is specified by user if this is
* for creation.
*/
- if (nd->flags & (LOOKUP_CREATE | LOOKUP_RENAME_TARGET))
+ if (flags & (LOOKUP_CREATE | LOOKUP_RENAME_TARGET))
return 0;
return 1;
}
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index 4a82950..c55c745 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -601,6 +601,11 @@
/* log == NULL indicates read-only mount */
if (log) {
+ /*
+ * Write quota structures to quota file, sync_blockdev() will
+ * write them to disk later
+ */
+ dquot_writeback_dquots(sb, -1);
jfs_flush_journal(log, wait);
jfs_syncpt(log, 0);
}
diff --git a/fs/libfs.c b/fs/libfs.c
index f86ec27..a74cb17 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -53,7 +53,7 @@
* Lookup the data. This is trivial - if the dentry didn't already
* exist, we know it is negative. Set d_op to delete negative dentries.
*/
-struct dentry *simple_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
+struct dentry *simple_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
{
static const struct dentry_operations simple_dentry_operations = {
.d_delete = simple_delete_dentry,
@@ -222,15 +222,15 @@
const struct super_operations *ops,
const struct dentry_operations *dops, unsigned long magic)
{
- struct super_block *s = sget(fs_type, NULL, set_anon_super, NULL);
+ struct super_block *s;
struct dentry *dentry;
struct inode *root;
struct qstr d_name = QSTR_INIT(name, strlen(name));
+ s = sget(fs_type, NULL, set_anon_super, MS_NOUSER, NULL);
if (IS_ERR(s))
return ERR_CAST(s);
- s->s_flags = MS_NOUSER;
s->s_maxbytes = MAX_LFS_FILESIZE;
s->s_blocksize = PAGE_SIZE;
s->s_blocksize_bits = PAGE_SHIFT;
diff --git a/fs/locks.c b/fs/locks.c
index 814c51d..82c3533 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -308,7 +308,7 @@
return 0;
}
-static int assign_type(struct file_lock *fl, int type)
+static int assign_type(struct file_lock *fl, long type)
{
switch (type) {
case F_RDLCK:
@@ -445,7 +445,7 @@
/*
* Initialize a lease, use the default lock manager operations
*/
-static int lease_init(struct file *filp, int type, struct file_lock *fl)
+static int lease_init(struct file *filp, long type, struct file_lock *fl)
{
if (assign_type(fl, type) != 0)
return -EINVAL;
@@ -463,7 +463,7 @@
}
/* Allocate a file_lock initialised to this type of lease */
-static struct file_lock *lease_alloc(struct file *filp, int type)
+static struct file_lock *lease_alloc(struct file *filp, long type)
{
struct file_lock *fl = locks_alloc_lock();
int error = -ENOMEM;
@@ -1465,7 +1465,7 @@
case F_WRLCK:
return generic_add_lease(filp, arg, flp);
default:
- BUG();
+ return -EINVAL;
}
}
EXPORT_SYMBOL(generic_setlease);
diff --git a/fs/logfs/dir.c b/fs/logfs/dir.c
index bea5d1b..26e4a94 100644
--- a/fs/logfs/dir.c
+++ b/fs/logfs/dir.c
@@ -349,7 +349,7 @@
}
static struct dentry *logfs_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct page *page;
struct logfs_disk_dentry *dd;
@@ -502,7 +502,7 @@
}
static int logfs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
struct inode *inode;
diff --git a/fs/logfs/super.c b/fs/logfs/super.c
index 97bca62..345c24b 100644
--- a/fs/logfs/super.c
+++ b/fs/logfs/super.c
@@ -519,7 +519,7 @@
log_super("LogFS: Start mount %x\n", mount_count++);
err = -EINVAL;
- sb = sget(type, logfs_sb_test, logfs_sb_set, super);
+ sb = sget(type, logfs_sb_test, logfs_sb_set, flags | MS_NOATIME, super);
if (IS_ERR(sb)) {
super->s_devops->put_device(super);
kfree(super);
@@ -542,7 +542,6 @@
sb->s_maxbytes = (1ull << 43) - 1;
sb->s_max_links = LOGFS_LINK_MAX;
sb->s_op = &logfs_super_operations;
- sb->s_flags = flags | MS_NOATIME;
err = logfs_read_sb(sb, sb->s_flags & MS_RDONLY);
if (err)
diff --git a/fs/minix/namei.c b/fs/minix/namei.c
index 2d0ee17..0db73d9 100644
--- a/fs/minix/namei.c
+++ b/fs/minix/namei.c
@@ -18,7 +18,7 @@
return err;
}
-static struct dentry *minix_lookup(struct inode * dir, struct dentry *dentry, struct nameidata *nd)
+static struct dentry *minix_lookup(struct inode * dir, struct dentry *dentry, unsigned int flags)
{
struct inode * inode = NULL;
ino_t ino;
@@ -55,7 +55,7 @@
}
static int minix_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
return minix_mknod(dir, dentry, mode, 0);
}
diff --git a/fs/mount.h b/fs/mount.h
index 4ef36d9..4f291f9 100644
--- a/fs/mount.h
+++ b/fs/mount.h
@@ -22,7 +22,6 @@
struct vfsmount mnt;
#ifdef CONFIG_SMP
struct mnt_pcp __percpu *mnt_pcp;
- atomic_t mnt_longterm; /* how many of the refs are longterm */
#else
int mnt_count;
int mnt_writers;
@@ -49,6 +48,8 @@
int mnt_ghosts;
};
+#define MNT_NS_INTERNAL ERR_PTR(-EINVAL) /* distinct from any mnt_namespace */
+
static inline struct mount *real_mount(struct vfsmount *mnt)
{
return container_of(mnt, struct mount, mnt);
@@ -59,6 +60,12 @@
return mnt != mnt->mnt_parent;
}
+static inline int is_mounted(struct vfsmount *mnt)
+{
+ /* neither detached nor internal? */
+ return !IS_ERR_OR_NULL(real_mount(mnt));
+}
+
extern struct mount *__lookup_mnt(struct vfsmount *, struct dentry *, int);
static inline void get_mnt_ns(struct mnt_namespace *ns)
@@ -67,10 +74,12 @@
}
struct proc_mounts {
- struct seq_file m; /* must be the first element */
+ struct seq_file m;
struct mnt_namespace *ns;
struct path root;
int (*show)(struct seq_file *, struct vfsmount *);
};
+#define proc_mounts(p) (container_of((p), struct proc_mounts, m))
+
extern const struct seq_operations mounts_op;
diff --git a/fs/namei.c b/fs/namei.c
index 7d69419..2ccc35c 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -315,31 +315,22 @@
}
/**
- * inode_permission - check for access rights to a given inode
- * @inode: inode to check permission on
- * @mask: right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC, ...)
+ * __inode_permission - Check for access rights to a given inode
+ * @inode: Inode to check permission on
+ * @mask: Right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC)
*
- * Used to check for read/write/execute permissions on an inode.
- * We use "fsuid" for this, letting us set arbitrary permissions
- * for filesystem access without changing the "normal" uids which
- * are used for other things.
+ * Check for read/write/execute permissions on an inode.
*
* When checking for MAY_APPEND, MAY_WRITE must also be set in @mask.
+ *
+ * This does not check for a read-only file system. You probably want
+ * inode_permission().
*/
-int inode_permission(struct inode *inode, int mask)
+int __inode_permission(struct inode *inode, int mask)
{
int retval;
if (unlikely(mask & MAY_WRITE)) {
- umode_t mode = inode->i_mode;
-
- /*
- * Nobody gets write access to a read-only fs.
- */
- if (IS_RDONLY(inode) &&
- (S_ISREG(mode) || S_ISDIR(mode) || S_ISLNK(mode)))
- return -EROFS;
-
/*
* Nobody gets write access to an immutable file.
*/
@@ -359,6 +350,47 @@
}
/**
+ * sb_permission - Check superblock-level permissions
+ * @sb: Superblock of inode to check permission on
+ * @mask: Right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC)
+ *
+ * Separate out file-system wide checks from inode-specific permission checks.
+ */
+static int sb_permission(struct super_block *sb, struct inode *inode, int mask)
+{
+ if (unlikely(mask & MAY_WRITE)) {
+ umode_t mode = inode->i_mode;
+
+ /* Nobody gets write access to a read-only fs. */
+ if ((sb->s_flags & MS_RDONLY) &&
+ (S_ISREG(mode) || S_ISDIR(mode) || S_ISLNK(mode)))
+ return -EROFS;
+ }
+ return 0;
+}
+
+/**
+ * inode_permission - Check for access rights to a given inode
+ * @inode: Inode to check permission on
+ * @mask: Right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC)
+ *
+ * Check for read/write/execute permissions on an inode. We use fs[ug]id for
+ * this, letting us set arbitrary permissions for filesystem access without
+ * changing the "normal" UIDs which are used for other things.
+ *
+ * When checking for MAY_APPEND, MAY_WRITE must also be set in @mask.
+ */
+int inode_permission(struct inode *inode, int mask)
+{
+ int retval;
+
+ retval = sb_permission(inode->i_sb, inode, mask);
+ if (retval)
+ return retval;
+ return __inode_permission(inode, mask);
+}
+
+/**
* path_get - get a reference to a path
* @path: path to get the reference to
*
@@ -395,6 +427,18 @@
* to restart the path walk from the beginning in ref-walk mode.
*/
+static inline void lock_rcu_walk(void)
+{
+ br_read_lock(&vfsmount_lock);
+ rcu_read_lock();
+}
+
+static inline void unlock_rcu_walk(void)
+{
+ rcu_read_unlock();
+ br_read_unlock(&vfsmount_lock);
+}
+
/**
* unlazy_walk - try to switch to ref-walk mode.
* @nd: nameidata pathwalk data
@@ -448,8 +492,7 @@
}
mntget(nd->path.mnt);
- rcu_read_unlock();
- br_read_unlock(&vfsmount_lock);
+ unlock_rcu_walk();
nd->flags &= ~LOOKUP_RCU;
return 0;
@@ -463,25 +506,9 @@
return -ECHILD;
}
-/**
- * release_open_intent - free up open intent resources
- * @nd: pointer to nameidata
- */
-void release_open_intent(struct nameidata *nd)
+static inline int d_revalidate(struct dentry *dentry, unsigned int flags)
{
- struct file *file = nd->intent.open.file;
-
- if (file && !IS_ERR(file)) {
- if (file->f_path.dentry == NULL)
- put_filp(file);
- else
- fput(file);
- }
-}
-
-static inline int d_revalidate(struct dentry *dentry, struct nameidata *nd)
-{
- return dentry->d_op->d_revalidate(dentry, nd);
+ return dentry->d_op->d_revalidate(dentry, flags);
}
/**
@@ -506,15 +533,13 @@
spin_lock(&dentry->d_lock);
if (unlikely(!__d_rcu_to_refcount(dentry, nd->seq))) {
spin_unlock(&dentry->d_lock);
- rcu_read_unlock();
- br_read_unlock(&vfsmount_lock);
+ unlock_rcu_walk();
return -ECHILD;
}
BUG_ON(nd->inode != dentry->d_inode);
spin_unlock(&dentry->d_lock);
mntget(nd->path.mnt);
- rcu_read_unlock();
- br_read_unlock(&vfsmount_lock);
+ unlock_rcu_walk();
}
if (likely(!(nd->flags & LOOKUP_JUMPED)))
@@ -527,7 +552,7 @@
return 0;
/* Note: we do not d_invalidate() */
- status = d_revalidate(dentry, nd);
+ status = d_revalidate(dentry, nd->flags);
if (status > 0)
return 0;
@@ -602,10 +627,25 @@
nd->path.dentry = path->dentry;
}
+/*
+ * Helper to directly jump to a known parsed path from ->follow_link,
+ * caller must have taken a reference to path beforehand.
+ */
+void nd_jump_link(struct nameidata *nd, struct path *path)
+{
+ path_put(&nd->path);
+
+ nd->path = *path;
+ nd->inode = nd->path.dentry->d_inode;
+ nd->flags |= LOOKUP_JUMPED;
+
+ BUG_ON(nd->inode->i_op->follow_link);
+}
+
static inline void put_link(struct nameidata *nd, struct path *link, void *cookie)
{
struct inode *inode = link->dentry->d_inode;
- if (!IS_ERR(cookie) && inode->i_op->put_link)
+ if (inode->i_op->put_link)
inode->i_op->put_link(link->dentry, nd, cookie);
path_put(link);
}
@@ -613,19 +653,19 @@
static __always_inline int
follow_link(struct path *link, struct nameidata *nd, void **p)
{
- int error;
struct dentry *dentry = link->dentry;
+ int error;
+ char *s;
BUG_ON(nd->flags & LOOKUP_RCU);
if (link->mnt == nd->path.mnt)
mntget(link->mnt);
- if (unlikely(current->total_link_count >= 40)) {
- *p = ERR_PTR(-ELOOP); /* no ->put_link(), please */
- path_put(&nd->path);
- return -ELOOP;
- }
+ error = -ELOOP;
+ if (unlikely(current->total_link_count >= 40))
+ goto out_put_nd_path;
+
cond_resched();
current->total_link_count++;
@@ -633,30 +673,28 @@
nd_set_link(nd, NULL);
error = security_inode_follow_link(link->dentry, nd);
- if (error) {
- *p = ERR_PTR(error); /* no ->put_link(), please */
- path_put(&nd->path);
- return error;
- }
+ if (error)
+ goto out_put_nd_path;
nd->last_type = LAST_BIND;
*p = dentry->d_inode->i_op->follow_link(dentry, nd);
error = PTR_ERR(*p);
- if (!IS_ERR(*p)) {
- char *s = nd_get_link(nd);
- error = 0;
- if (s)
- error = __vfs_follow_link(nd, s);
- else if (nd->last_type == LAST_BIND) {
- nd->flags |= LOOKUP_JUMPED;
- nd->inode = nd->path.dentry->d_inode;
- if (nd->inode->i_op->follow_link) {
- /* stepped on a _really_ weird one */
- path_put(&nd->path);
- error = -ELOOP;
- }
- }
+ if (IS_ERR(*p))
+ goto out_put_nd_path;
+
+ error = 0;
+ s = nd_get_link(nd);
+ if (s) {
+ error = __vfs_follow_link(nd, s);
+ if (unlikely(error))
+ put_link(nd, link, *p);
}
+
+ return error;
+
+out_put_nd_path:
+ path_put(&nd->path);
+ path_put(link);
return error;
}
@@ -675,6 +713,16 @@
return 1;
}
+/*
+ * follow_up - Find the mountpoint of path's vfsmount
+ *
+ * Given a path, find the mountpoint of its source file system.
+ * Replace @path with the path of the mountpoint in the parent mount.
+ * Up is towards /.
+ *
+ * Return 1 if we went up a level and 0 if we were already at the
+ * root.
+ */
int follow_up(struct path *path)
{
struct mount *mnt = real_mount(path->mnt);
@@ -683,7 +731,7 @@
br_read_lock(&vfsmount_lock);
parent = mnt->mnt_parent;
- if (&parent->mnt == path->mnt) {
+ if (parent == mnt) {
br_read_unlock(&vfsmount_lock);
return 0;
}
@@ -946,8 +994,7 @@
nd->flags &= ~LOOKUP_RCU;
if (!(nd->flags & LOOKUP_ROOT))
nd->root.mnt = NULL;
- rcu_read_unlock();
- br_read_unlock(&vfsmount_lock);
+ unlock_rcu_walk();
return -ECHILD;
}
@@ -1048,7 +1095,7 @@
* dir->d_inode->i_mutex must be held
*/
static struct dentry *lookup_dcache(struct qstr *name, struct dentry *dir,
- struct nameidata *nd, bool *need_lookup)
+ unsigned int flags, bool *need_lookup)
{
struct dentry *dentry;
int error;
@@ -1059,7 +1106,7 @@
if (d_need_lookup(dentry)) {
*need_lookup = true;
} else if (dentry->d_flags & DCACHE_OP_REVALIDATE) {
- error = d_revalidate(dentry, nd);
+ error = d_revalidate(dentry, flags);
if (unlikely(error <= 0)) {
if (error < 0) {
dput(dentry);
@@ -1089,7 +1136,7 @@
* dir->d_inode->i_mutex must be held
*/
static struct dentry *lookup_real(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct dentry *old;
@@ -1099,7 +1146,7 @@
return ERR_PTR(-ENOENT);
}
- old = dir->i_op->lookup(dir, dentry, nd);
+ old = dir->i_op->lookup(dir, dentry, flags);
if (unlikely(old)) {
dput(dentry);
dentry = old;
@@ -1108,16 +1155,16 @@
}
static struct dentry *__lookup_hash(struct qstr *name,
- struct dentry *base, struct nameidata *nd)
+ struct dentry *base, unsigned int flags)
{
bool need_lookup;
struct dentry *dentry;
- dentry = lookup_dcache(name, base, nd, &need_lookup);
+ dentry = lookup_dcache(name, base, flags, &need_lookup);
if (!need_lookup)
return dentry;
- return lookup_real(base->d_inode, dentry, nd);
+ return lookup_real(base->d_inode, dentry, flags);
}
/*
@@ -1167,7 +1214,7 @@
if (unlikely(d_need_lookup(dentry)))
goto unlazy;
if (unlikely(dentry->d_flags & DCACHE_OP_REVALIDATE)) {
- status = d_revalidate(dentry, nd);
+ status = d_revalidate(dentry, nd->flags);
if (unlikely(status <= 0)) {
if (status != -ECHILD)
need_reval = 0;
@@ -1197,7 +1244,7 @@
}
if (unlikely(dentry->d_flags & DCACHE_OP_REVALIDATE) && need_reval)
- status = d_revalidate(dentry, nd);
+ status = d_revalidate(dentry, nd->flags);
if (unlikely(status <= 0)) {
if (status < 0) {
dput(dentry);
@@ -1236,7 +1283,7 @@
BUG_ON(nd->inode != parent->d_inode);
mutex_lock(&parent->d_inode->i_mutex);
- dentry = __lookup_hash(name, parent, nd);
+ dentry = __lookup_hash(name, parent, nd->flags);
mutex_unlock(&parent->d_inode->i_mutex);
if (IS_ERR(dentry))
return PTR_ERR(dentry);
@@ -1284,8 +1331,7 @@
nd->flags &= ~LOOKUP_RCU;
if (!(nd->flags & LOOKUP_ROOT))
nd->root.mnt = NULL;
- rcu_read_unlock();
- br_read_unlock(&vfsmount_lock);
+ unlock_rcu_walk();
}
}
@@ -1383,9 +1429,10 @@
void *cookie;
res = follow_link(&link, nd, &cookie);
- if (!res)
- res = walk_component(nd, path, &nd->last,
- nd->last_type, LOOKUP_FOLLOW);
+ if (res)
+ break;
+ res = walk_component(nd, path, &nd->last,
+ nd->last_type, LOOKUP_FOLLOW);
put_link(nd, &link, cookie);
} while (res > 0);
@@ -1651,8 +1698,7 @@
nd->path = nd->root;
nd->inode = inode;
if (flags & LOOKUP_RCU) {
- br_read_lock(&vfsmount_lock);
- rcu_read_lock();
+ lock_rcu_walk();
nd->seq = __read_seqcount_begin(&nd->path.dentry->d_seq);
} else {
path_get(&nd->path);
@@ -1664,8 +1710,7 @@
if (*name=='/') {
if (flags & LOOKUP_RCU) {
- br_read_lock(&vfsmount_lock);
- rcu_read_lock();
+ lock_rcu_walk();
set_root_rcu(nd);
} else {
set_root(nd);
@@ -1677,8 +1722,7 @@
struct fs_struct *fs = current->fs;
unsigned seq;
- br_read_lock(&vfsmount_lock);
- rcu_read_lock();
+ lock_rcu_walk();
do {
seq = read_seqcount_begin(&fs->seq);
@@ -1713,8 +1757,7 @@
if (fput_needed)
*fp = file;
nd->seq = __read_seqcount_begin(&nd->path.dentry->d_seq);
- br_read_lock(&vfsmount_lock);
- rcu_read_lock();
+ lock_rcu_walk();
} else {
path_get(&file->f_path);
fput_light(file, fput_needed);
@@ -1777,8 +1820,9 @@
struct path link = path;
nd->flags |= LOOKUP_PARENT;
err = follow_link(&link, nd, &cookie);
- if (!err)
- err = lookup_last(nd, &path);
+ if (err)
+ break;
+ err = lookup_last(nd, &path);
put_link(nd, &link, cookie);
}
}
@@ -1821,9 +1865,27 @@
return retval;
}
-int kern_path_parent(const char *name, struct nameidata *nd)
+/* does lookup, returns the object with parent locked */
+struct dentry *kern_path_locked(const char *name, struct path *path)
{
- return do_path_lookup(AT_FDCWD, name, LOOKUP_PARENT, nd);
+ struct nameidata nd;
+ struct dentry *d;
+ int err = do_path_lookup(AT_FDCWD, name, LOOKUP_PARENT, &nd);
+ if (err)
+ return ERR_PTR(err);
+ if (nd.last_type != LAST_NORM) {
+ path_put(&nd.path);
+ return ERR_PTR(-EINVAL);
+ }
+ mutex_lock_nested(&nd.path.dentry->d_inode->i_mutex, I_MUTEX_PARENT);
+ d = __lookup_hash(&nd.last, nd.path.dentry, 0);
+ if (IS_ERR(d)) {
+ mutex_unlock(&nd.path.dentry->d_inode->i_mutex);
+ path_put(&nd.path);
+ return d;
+ }
+ *path = nd.path;
+ return d;
}
int kern_path(const char *name, unsigned int flags, struct path *path)
@@ -1866,7 +1928,7 @@
*/
static struct dentry *lookup_hash(struct nameidata *nd)
{
- return __lookup_hash(&nd->last, nd->path.dentry, nd);
+ return __lookup_hash(&nd->last, nd->path.dentry, nd->flags);
}
/**
@@ -1913,7 +1975,7 @@
if (err)
return ERR_PTR(err);
- return __lookup_hash(&this, base, NULL);
+ return __lookup_hash(&this, base, 0);
}
int user_path_at_empty(int dfd, const char __user *name, unsigned flags,
@@ -2086,10 +2148,9 @@
}
int vfs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool want_excl)
{
int error = may_create(dir, dentry);
-
if (error)
return error;
@@ -2100,7 +2161,7 @@
error = security_inode_create(dir, dentry, mode);
if (error)
return error;
- error = dir->i_op->create(dir, dentry, mode, nd);
+ error = dir->i_op->create(dir, dentry, mode, want_excl);
if (!error)
fsnotify_create(dir, dentry);
return error;
@@ -2187,21 +2248,275 @@
return flag;
}
+static int may_o_create(struct path *dir, struct dentry *dentry, umode_t mode)
+{
+ int error = security_path_mknod(dir, dentry, mode, 0);
+ if (error)
+ return error;
+
+ error = inode_permission(dir->dentry->d_inode, MAY_WRITE | MAY_EXEC);
+ if (error)
+ return error;
+
+ return security_inode_create(dir->dentry->d_inode, dentry, mode);
+}
+
+/*
+ * Attempt to atomically look up, create and open a file from a negative
+ * dentry.
+ *
+ * Returns 0 if successful. The file will have been created and attached to
+ * @file by the filesystem calling finish_open().
+ *
+ * Returns 1 if the file was looked up only or didn't need creating. The
+ * caller will need to perform the open themselves. @path will have been
+ * updated to point to the new dentry. This may be negative.
+ *
+ * Returns an error code otherwise.
+ */
+static int atomic_open(struct nameidata *nd, struct dentry *dentry,
+ struct path *path, struct file *file,
+ const struct open_flags *op,
+ bool *want_write, bool need_lookup,
+ int *opened)
+{
+ struct inode *dir = nd->path.dentry->d_inode;
+ unsigned open_flag = open_to_namei_flags(op->open_flag);
+ umode_t mode;
+ int error;
+ int acc_mode;
+ int create_error = 0;
+ struct dentry *const DENTRY_NOT_SET = (void *) -1UL;
+
+ BUG_ON(dentry->d_inode);
+
+ /* Don't create child dentry for a dead directory. */
+ if (unlikely(IS_DEADDIR(dir))) {
+ error = -ENOENT;
+ goto out;
+ }
+
+ mode = op->mode & S_IALLUGO;
+ if ((open_flag & O_CREAT) && !IS_POSIXACL(dir))
+ mode &= ~current_umask();
+
+ if (open_flag & O_EXCL) {
+ open_flag &= ~O_TRUNC;
+ *opened |= FILE_CREATED;
+ }
+
+ /*
+ * Checking write permission is tricky, bacuse we don't know if we are
+ * going to actually need it: O_CREAT opens should work as long as the
+ * file exists. But checking existence breaks atomicity. The trick is
+ * to check access and if not granted clear O_CREAT from the flags.
+ *
+ * Another problem is returing the "right" error value (e.g. for an
+ * O_EXCL open we want to return EEXIST not EROFS).
+ */
+ if ((open_flag & (O_CREAT | O_TRUNC)) ||
+ (open_flag & O_ACCMODE) != O_RDONLY) {
+ error = mnt_want_write(nd->path.mnt);
+ if (!error) {
+ *want_write = true;
+ } else if (!(open_flag & O_CREAT)) {
+ /*
+ * No O_CREATE -> atomicity not a requirement -> fall
+ * back to lookup + open
+ */
+ goto no_open;
+ } else if (open_flag & (O_EXCL | O_TRUNC)) {
+ /* Fall back and fail with the right error */
+ create_error = error;
+ goto no_open;
+ } else {
+ /* No side effects, safe to clear O_CREAT */
+ create_error = error;
+ open_flag &= ~O_CREAT;
+ }
+ }
+
+ if (open_flag & O_CREAT) {
+ error = may_o_create(&nd->path, dentry, op->mode);
+ if (error) {
+ create_error = error;
+ if (open_flag & O_EXCL)
+ goto no_open;
+ open_flag &= ~O_CREAT;
+ }
+ }
+
+ if (nd->flags & LOOKUP_DIRECTORY)
+ open_flag |= O_DIRECTORY;
+
+ file->f_path.dentry = DENTRY_NOT_SET;
+ file->f_path.mnt = nd->path.mnt;
+ error = dir->i_op->atomic_open(dir, dentry, file, open_flag, mode,
+ opened);
+ if (error < 0) {
+ if (create_error && error == -ENOENT)
+ error = create_error;
+ goto out;
+ }
+
+ acc_mode = op->acc_mode;
+ if (*opened & FILE_CREATED) {
+ fsnotify_create(dir, dentry);
+ acc_mode = MAY_OPEN;
+ }
+
+ if (error) { /* returned 1, that is */
+ if (WARN_ON(file->f_path.dentry == DENTRY_NOT_SET)) {
+ error = -EIO;
+ goto out;
+ }
+ if (file->f_path.dentry) {
+ dput(dentry);
+ dentry = file->f_path.dentry;
+ }
+ goto looked_up;
+ }
+
+ /*
+ * We didn't have the inode before the open, so check open permission
+ * here.
+ */
+ error = may_open(&file->f_path, acc_mode, open_flag);
+ if (error)
+ fput(file);
+
+out:
+ dput(dentry);
+ return error;
+
+no_open:
+ if (need_lookup) {
+ dentry = lookup_real(dir, dentry, nd->flags);
+ if (IS_ERR(dentry))
+ return PTR_ERR(dentry);
+
+ if (create_error) {
+ int open_flag = op->open_flag;
+
+ error = create_error;
+ if ((open_flag & O_EXCL)) {
+ if (!dentry->d_inode)
+ goto out;
+ } else if (!dentry->d_inode) {
+ goto out;
+ } else if ((open_flag & O_TRUNC) &&
+ S_ISREG(dentry->d_inode->i_mode)) {
+ goto out;
+ }
+ /* will fail later, go on to get the right error */
+ }
+ }
+looked_up:
+ path->dentry = dentry;
+ path->mnt = nd->path.mnt;
+ return 1;
+}
+
+/*
+ * Look up and maybe create and open the last component.
+ *
+ * Must be called with i_mutex held on parent.
+ *
+ * Returns 0 if the file was successfully atomically created (if necessary) and
+ * opened. In this case the file will be returned attached to @file.
+ *
+ * Returns 1 if the file was not completely opened at this time, though lookups
+ * and creations will have been performed and the dentry returned in @path will
+ * be positive upon return if O_CREAT was specified. If O_CREAT wasn't
+ * specified then a negative dentry may be returned.
+ *
+ * An error code is returned otherwise.
+ *
+ * FILE_CREATE will be set in @*opened if the dentry was created and will be
+ * cleared otherwise prior to returning.
+ */
+static int lookup_open(struct nameidata *nd, struct path *path,
+ struct file *file,
+ const struct open_flags *op,
+ bool *want_write, int *opened)
+{
+ struct dentry *dir = nd->path.dentry;
+ struct inode *dir_inode = dir->d_inode;
+ struct dentry *dentry;
+ int error;
+ bool need_lookup;
+
+ *opened &= ~FILE_CREATED;
+ dentry = lookup_dcache(&nd->last, dir, nd->flags, &need_lookup);
+ if (IS_ERR(dentry))
+ return PTR_ERR(dentry);
+
+ /* Cached positive dentry: will open in f_op->open */
+ if (!need_lookup && dentry->d_inode)
+ goto out_no_open;
+
+ if ((nd->flags & LOOKUP_OPEN) && dir_inode->i_op->atomic_open) {
+ return atomic_open(nd, dentry, path, file, op, want_write,
+ need_lookup, opened);
+ }
+
+ if (need_lookup) {
+ BUG_ON(dentry->d_inode);
+
+ dentry = lookup_real(dir_inode, dentry, nd->flags);
+ if (IS_ERR(dentry))
+ return PTR_ERR(dentry);
+ }
+
+ /* Negative dentry, just create the file */
+ if (!dentry->d_inode && (op->open_flag & O_CREAT)) {
+ umode_t mode = op->mode;
+ if (!IS_POSIXACL(dir->d_inode))
+ mode &= ~current_umask();
+ /*
+ * This write is needed to ensure that a
+ * rw->ro transition does not occur between
+ * the time when the file is created and when
+ * a permanent write count is taken through
+ * the 'struct file' in finish_open().
+ */
+ error = mnt_want_write(nd->path.mnt);
+ if (error)
+ goto out_dput;
+ *want_write = true;
+ *opened |= FILE_CREATED;
+ error = security_path_mknod(&nd->path, dentry, mode, 0);
+ if (error)
+ goto out_dput;
+ error = vfs_create(dir->d_inode, dentry, mode,
+ nd->flags & LOOKUP_EXCL);
+ if (error)
+ goto out_dput;
+ }
+out_no_open:
+ path->dentry = dentry;
+ path->mnt = nd->path.mnt;
+ return 1;
+
+out_dput:
+ dput(dentry);
+ return error;
+}
+
/*
* Handle the last step of open()
*/
-static struct file *do_last(struct nameidata *nd, struct path *path,
- const struct open_flags *op, const char *pathname)
+static int do_last(struct nameidata *nd, struct path *path,
+ struct file *file, const struct open_flags *op,
+ int *opened, const char *pathname)
{
struct dentry *dir = nd->path.dentry;
- struct dentry *dentry;
int open_flag = op->open_flag;
- int will_truncate = open_flag & O_TRUNC;
- int want_write = 0;
+ bool will_truncate = (open_flag & O_TRUNC) != 0;
+ bool want_write = false;
int acc_mode = op->acc_mode;
- struct file *filp;
struct inode *inode;
- int symlink_ok = 0;
+ bool symlink_ok = false;
struct path save_parent = { .dentry = NULL, .mnt = NULL };
bool retried = false;
int error;
@@ -2214,112 +2529,99 @@
case LAST_DOT:
error = handle_dots(nd, nd->last_type);
if (error)
- return ERR_PTR(error);
+ return error;
/* fallthrough */
case LAST_ROOT:
error = complete_walk(nd);
if (error)
- return ERR_PTR(error);
+ return error;
audit_inode(pathname, nd->path.dentry);
if (open_flag & O_CREAT) {
error = -EISDIR;
- goto exit;
+ goto out;
}
- goto ok;
+ goto finish_open;
case LAST_BIND:
error = complete_walk(nd);
if (error)
- return ERR_PTR(error);
+ return error;
audit_inode(pathname, dir);
- goto ok;
+ goto finish_open;
}
if (!(open_flag & O_CREAT)) {
if (nd->last.name[nd->last.len])
nd->flags |= LOOKUP_FOLLOW | LOOKUP_DIRECTORY;
if (open_flag & O_PATH && !(nd->flags & LOOKUP_FOLLOW))
- symlink_ok = 1;
+ symlink_ok = true;
/* we _can_ be in RCU mode here */
error = lookup_fast(nd, &nd->last, path, &inode);
- if (unlikely(error)) {
- if (error < 0)
- goto exit;
+ if (likely(!error))
+ goto finish_lookup;
- error = lookup_slow(nd, &nd->last, path);
- if (error < 0)
- goto exit;
+ if (error < 0)
+ goto out;
- inode = path->dentry->d_inode;
- }
- goto finish_lookup;
+ BUG_ON(nd->inode != dir->d_inode);
+ } else {
+ /* create side of things */
+ /*
+ * This will *only* deal with leaving RCU mode - LOOKUP_JUMPED
+ * has been cleared when we got to the last component we are
+ * about to look up
+ */
+ error = complete_walk(nd);
+ if (error)
+ return error;
+
+ audit_inode(pathname, dir);
+ error = -EISDIR;
+ /* trailing slashes? */
+ if (nd->last.name[nd->last.len])
+ goto out;
}
- /* create side of things */
- /*
- * This will *only* deal with leaving RCU mode - LOOKUP_JUMPED has been
- * cleared when we got to the last component we are about to look up
- */
- error = complete_walk(nd);
- if (error)
- return ERR_PTR(error);
-
- audit_inode(pathname, dir);
- error = -EISDIR;
- /* trailing slashes? */
- if (nd->last.name[nd->last.len])
- goto exit;
-
retry_lookup:
mutex_lock(&dir->d_inode->i_mutex);
+ error = lookup_open(nd, path, file, op, &want_write, opened);
+ mutex_unlock(&dir->d_inode->i_mutex);
- dentry = lookup_hash(nd);
- error = PTR_ERR(dentry);
- if (IS_ERR(dentry)) {
- mutex_unlock(&dir->d_inode->i_mutex);
- goto exit;
+ if (error <= 0) {
+ if (error)
+ goto out;
+
+ if ((*opened & FILE_CREATED) ||
+ !S_ISREG(file->f_path.dentry->d_inode->i_mode))
+ will_truncate = false;
+
+ audit_inode(pathname, file->f_path.dentry);
+ goto opened;
}
- path->dentry = dentry;
- path->mnt = nd->path.mnt;
-
- /* Negative dentry, just create the file */
- if (!dentry->d_inode) {
- umode_t mode = op->mode;
- if (!IS_POSIXACL(dir->d_inode))
- mode &= ~current_umask();
- /*
- * This write is needed to ensure that a
- * rw->ro transition does not occur between
- * the time when the file is created and when
- * a permanent write count is taken through
- * the 'struct file' in nameidata_to_filp().
- */
- error = mnt_want_write(nd->path.mnt);
- if (error)
- goto exit_mutex_unlock;
- want_write = 1;
+ if (*opened & FILE_CREATED) {
/* Don't check for write permission, don't truncate */
open_flag &= ~O_TRUNC;
- will_truncate = 0;
+ will_truncate = false;
acc_mode = MAY_OPEN;
- error = security_path_mknod(&nd->path, dentry, mode, 0);
- if (error)
- goto exit_mutex_unlock;
- error = vfs_create(dir->d_inode, dentry, mode, nd);
- if (error)
- goto exit_mutex_unlock;
- mutex_unlock(&dir->d_inode->i_mutex);
- dput(nd->path.dentry);
- nd->path.dentry = dentry;
- goto common;
+ path_to_nameidata(path, nd);
+ goto finish_open_created;
}
/*
* It already exists.
*/
- mutex_unlock(&dir->d_inode->i_mutex);
audit_inode(pathname, path->dentry);
+ /*
+ * If atomic_open() acquired write access it is dropped now due to
+ * possible mount and symlink following (this might be optimized away if
+ * necessary...)
+ */
+ if (want_write) {
+ mnt_drop_write(nd->path.mnt);
+ want_write = false;
+ }
+
error = -EEXIST;
if (open_flag & O_EXCL)
goto exit_dput;
@@ -2338,18 +2640,18 @@
error = -ENOENT;
if (!inode) {
path_to_nameidata(path, nd);
- goto exit;
+ goto out;
}
if (should_follow_link(inode, !symlink_ok)) {
if (nd->flags & LOOKUP_RCU) {
if (unlikely(unlazy_walk(nd, path->dentry))) {
error = -ECHILD;
- goto exit;
+ goto out;
}
}
BUG_ON(inode != path->dentry->d_inode);
- return NULL;
+ return 1;
}
if ((nd->flags & LOOKUP_RCU) || nd->path.mnt != path->mnt) {
@@ -2365,119 +2667,122 @@
error = complete_walk(nd);
if (error) {
path_put(&save_parent);
- return ERR_PTR(error);
+ return error;
}
error = -EISDIR;
if ((open_flag & O_CREAT) && S_ISDIR(nd->inode->i_mode))
- goto exit;
+ goto out;
error = -ENOTDIR;
if ((nd->flags & LOOKUP_DIRECTORY) && !nd->inode->i_op->lookup)
- goto exit;
+ goto out;
audit_inode(pathname, nd->path.dentry);
-ok:
+finish_open:
if (!S_ISREG(nd->inode->i_mode))
- will_truncate = 0;
+ will_truncate = false;
if (will_truncate) {
error = mnt_want_write(nd->path.mnt);
if (error)
- goto exit;
- want_write = 1;
+ goto out;
+ want_write = true;
}
-common:
+finish_open_created:
error = may_open(&nd->path, acc_mode, open_flag);
if (error)
- goto exit;
- filp = nameidata_to_filp(nd);
- if (filp == ERR_PTR(-EOPENSTALE) && save_parent.dentry && !retried) {
- BUG_ON(save_parent.dentry != dir);
- path_put(&nd->path);
- nd->path = save_parent;
- nd->inode = dir->d_inode;
- save_parent.mnt = NULL;
- save_parent.dentry = NULL;
- if (want_write) {
- mnt_drop_write(nd->path.mnt);
- want_write = 0;
- }
- retried = true;
- goto retry_lookup;
+ goto out;
+ file->f_path.mnt = nd->path.mnt;
+ error = finish_open(file, nd->path.dentry, NULL, opened);
+ if (error) {
+ if (error == -EOPENSTALE)
+ goto stale_open;
+ goto out;
}
- if (!IS_ERR(filp)) {
- error = ima_file_check(filp, op->acc_mode);
- if (error) {
- fput(filp);
- filp = ERR_PTR(error);
- }
- }
- if (!IS_ERR(filp)) {
- if (will_truncate) {
- error = handle_truncate(filp);
- if (error) {
- fput(filp);
- filp = ERR_PTR(error);
- }
- }
+opened:
+ error = open_check_o_direct(file);
+ if (error)
+ goto exit_fput;
+ error = ima_file_check(file, op->acc_mode);
+ if (error)
+ goto exit_fput;
+
+ if (will_truncate) {
+ error = handle_truncate(file);
+ if (error)
+ goto exit_fput;
}
out:
if (want_write)
mnt_drop_write(nd->path.mnt);
path_put(&save_parent);
terminate_walk(nd);
- return filp;
+ return error;
-exit_mutex_unlock:
- mutex_unlock(&dir->d_inode->i_mutex);
exit_dput:
path_put_conditional(path, nd);
-exit:
- filp = ERR_PTR(error);
goto out;
+exit_fput:
+ fput(file);
+ goto out;
+
+stale_open:
+ /* If no saved parent or already retried then can't retry */
+ if (!save_parent.dentry || retried)
+ goto out;
+
+ BUG_ON(save_parent.dentry != dir);
+ path_put(&nd->path);
+ nd->path = save_parent;
+ nd->inode = dir->d_inode;
+ save_parent.mnt = NULL;
+ save_parent.dentry = NULL;
+ if (want_write) {
+ mnt_drop_write(nd->path.mnt);
+ want_write = false;
+ }
+ retried = true;
+ goto retry_lookup;
}
static struct file *path_openat(int dfd, const char *pathname,
struct nameidata *nd, const struct open_flags *op, int flags)
{
struct file *base = NULL;
- struct file *filp;
+ struct file *file;
struct path path;
+ int opened = 0;
int error;
- filp = get_empty_filp();
- if (!filp)
+ file = get_empty_filp();
+ if (!file)
return ERR_PTR(-ENFILE);
- filp->f_flags = op->open_flag;
- nd->intent.open.file = filp;
- nd->intent.open.flags = open_to_namei_flags(op->open_flag);
- nd->intent.open.create_mode = op->mode;
+ file->f_flags = op->open_flag;
error = path_init(dfd, pathname, flags | LOOKUP_PARENT, nd, &base);
if (unlikely(error))
- goto out_filp;
+ goto out;
current->total_link_count = 0;
error = link_path_walk(pathname, nd);
if (unlikely(error))
- goto out_filp;
+ goto out;
- filp = do_last(nd, &path, op, pathname);
- while (unlikely(!filp)) { /* trailing symlink */
+ error = do_last(nd, &path, file, op, &opened, pathname);
+ while (unlikely(error > 0)) { /* trailing symlink */
struct path link = path;
void *cookie;
if (!(nd->flags & LOOKUP_FOLLOW)) {
path_put_conditional(&path, nd);
path_put(&nd->path);
- filp = ERR_PTR(-ELOOP);
+ error = -ELOOP;
break;
}
nd->flags |= LOOKUP_PARENT;
nd->flags &= ~(LOOKUP_OPEN|LOOKUP_CREATE|LOOKUP_EXCL);
error = follow_link(&link, nd, &cookie);
if (unlikely(error))
- filp = ERR_PTR(error);
- else
- filp = do_last(nd, &path, op, pathname);
+ break;
+ error = do_last(nd, &path, file, op, &opened, pathname);
put_link(nd, &link, cookie);
}
out:
@@ -2485,18 +2790,20 @@
path_put(&nd->root);
if (base)
fput(base);
- release_open_intent(nd);
- if (filp == ERR_PTR(-EOPENSTALE)) {
- if (flags & LOOKUP_RCU)
- filp = ERR_PTR(-ECHILD);
- else
- filp = ERR_PTR(-ESTALE);
+ if (!(opened & FILE_OPENED)) {
+ BUG_ON(!error);
+ put_filp(file);
}
- return filp;
-
-out_filp:
- filp = ERR_PTR(error);
- goto out;
+ if (unlikely(error)) {
+ if (error == -EOPENSTALE) {
+ if (flags & LOOKUP_RCU)
+ error = -ECHILD;
+ else
+ error = -ESTALE;
+ }
+ file = ERR_PTR(error);
+ }
+ return file;
}
struct file *do_filp_open(int dfd, const char *pathname,
@@ -2551,7 +2858,6 @@
goto out;
nd.flags &= ~LOOKUP_PARENT;
nd.flags |= LOOKUP_CREATE | LOOKUP_EXCL;
- nd.intent.open.flags = O_EXCL;
/*
* Do the final lookup.
@@ -2670,7 +2976,7 @@
goto out_drop_write;
switch (mode & S_IFMT) {
case 0: case S_IFREG:
- error = vfs_create(path.dentry->d_inode,dentry,mode,NULL);
+ error = vfs_create(path.dentry->d_inode,dentry,mode,true);
break;
case S_IFCHR: case S_IFBLK:
error = vfs_mknod(path.dentry->d_inode,dentry,mode,
diff --git a/fs/namespace.c b/fs/namespace.c
index 1e4a5fe..c53d338 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -515,8 +515,20 @@
}
/*
- * lookup_mnt increments the ref count before returning
- * the vfsmount struct.
+ * lookup_mnt - Return the first child mount mounted at path
+ *
+ * "First" means first mounted chronologically. If you create the
+ * following mounts:
+ *
+ * mount /dev/sda1 /mnt
+ * mount /dev/sda2 /mnt
+ * mount /dev/sda3 /mnt
+ *
+ * Then lookup_mnt() on the base /mnt dentry in the root mount will
+ * return successively the root dentry and vfsmount of /dev/sda1, then
+ * /dev/sda2, then /dev/sda3, then NULL.
+ *
+ * lookup_mnt takes a reference to the found vfsmount.
*/
struct vfsmount *lookup_mnt(struct path *path)
{
@@ -621,21 +633,6 @@
list_add_tail(&mnt->mnt_child, &real_mount(path->mnt)->mnt_mounts);
}
-static inline void __mnt_make_longterm(struct mount *mnt)
-{
-#ifdef CONFIG_SMP
- atomic_inc(&mnt->mnt_longterm);
-#endif
-}
-
-/* needs vfsmount lock for write */
-static inline void __mnt_make_shortterm(struct mount *mnt)
-{
-#ifdef CONFIG_SMP
- atomic_dec(&mnt->mnt_longterm);
-#endif
-}
-
/*
* vfsmount lock must be held for write
*/
@@ -649,10 +646,8 @@
BUG_ON(parent == mnt);
list_add_tail(&head, &mnt->mnt_list);
- list_for_each_entry(m, &head, mnt_list) {
+ list_for_each_entry(m, &head, mnt_list)
m->mnt_ns = n;
- __mnt_make_longterm(m);
- }
list_splice(&head, n->list.prev);
@@ -725,56 +720,60 @@
int flag)
{
struct super_block *sb = old->mnt.mnt_sb;
- struct mount *mnt = alloc_vfsmnt(old->mnt_devname);
+ struct mount *mnt;
+ int err;
- if (mnt) {
- if (flag & (CL_SLAVE | CL_PRIVATE))
- mnt->mnt_group_id = 0; /* not a peer of original */
- else
- mnt->mnt_group_id = old->mnt_group_id;
+ mnt = alloc_vfsmnt(old->mnt_devname);
+ if (!mnt)
+ return ERR_PTR(-ENOMEM);
- if ((flag & CL_MAKE_SHARED) && !mnt->mnt_group_id) {
- int err = mnt_alloc_group_id(mnt);
- if (err)
- goto out_free;
- }
+ if (flag & (CL_SLAVE | CL_PRIVATE))
+ mnt->mnt_group_id = 0; /* not a peer of original */
+ else
+ mnt->mnt_group_id = old->mnt_group_id;
- mnt->mnt.mnt_flags = old->mnt.mnt_flags & ~MNT_WRITE_HOLD;
- atomic_inc(&sb->s_active);
- mnt->mnt.mnt_sb = sb;
- mnt->mnt.mnt_root = dget(root);
- mnt->mnt_mountpoint = mnt->mnt.mnt_root;
- mnt->mnt_parent = mnt;
- br_write_lock(&vfsmount_lock);
- list_add_tail(&mnt->mnt_instance, &sb->s_mounts);
- br_write_unlock(&vfsmount_lock);
-
- if (flag & CL_SLAVE) {
- list_add(&mnt->mnt_slave, &old->mnt_slave_list);
- mnt->mnt_master = old;
- CLEAR_MNT_SHARED(mnt);
- } else if (!(flag & CL_PRIVATE)) {
- if ((flag & CL_MAKE_SHARED) || IS_MNT_SHARED(old))
- list_add(&mnt->mnt_share, &old->mnt_share);
- if (IS_MNT_SLAVE(old))
- list_add(&mnt->mnt_slave, &old->mnt_slave);
- mnt->mnt_master = old->mnt_master;
- }
- if (flag & CL_MAKE_SHARED)
- set_mnt_shared(mnt);
-
- /* stick the duplicate mount on the same expiry list
- * as the original if that was on one */
- if (flag & CL_EXPIRE) {
- if (!list_empty(&old->mnt_expire))
- list_add(&mnt->mnt_expire, &old->mnt_expire);
- }
+ if ((flag & CL_MAKE_SHARED) && !mnt->mnt_group_id) {
+ err = mnt_alloc_group_id(mnt);
+ if (err)
+ goto out_free;
}
+
+ mnt->mnt.mnt_flags = old->mnt.mnt_flags & ~MNT_WRITE_HOLD;
+ atomic_inc(&sb->s_active);
+ mnt->mnt.mnt_sb = sb;
+ mnt->mnt.mnt_root = dget(root);
+ mnt->mnt_mountpoint = mnt->mnt.mnt_root;
+ mnt->mnt_parent = mnt;
+ br_write_lock(&vfsmount_lock);
+ list_add_tail(&mnt->mnt_instance, &sb->s_mounts);
+ br_write_unlock(&vfsmount_lock);
+
+ if (flag & CL_SLAVE) {
+ list_add(&mnt->mnt_slave, &old->mnt_slave_list);
+ mnt->mnt_master = old;
+ CLEAR_MNT_SHARED(mnt);
+ } else if (!(flag & CL_PRIVATE)) {
+ if ((flag & CL_MAKE_SHARED) || IS_MNT_SHARED(old))
+ list_add(&mnt->mnt_share, &old->mnt_share);
+ if (IS_MNT_SLAVE(old))
+ list_add(&mnt->mnt_slave, &old->mnt_slave);
+ mnt->mnt_master = old->mnt_master;
+ }
+ if (flag & CL_MAKE_SHARED)
+ set_mnt_shared(mnt);
+
+ /* stick the duplicate mount on the same expiry list
+ * as the original if that was on one */
+ if (flag & CL_EXPIRE) {
+ if (!list_empty(&old->mnt_expire))
+ list_add(&mnt->mnt_expire, &old->mnt_expire);
+ }
+
return mnt;
out_free:
free_vfsmnt(mnt);
- return NULL;
+ return ERR_PTR(err);
}
static inline void mntfree(struct mount *mnt)
@@ -804,7 +803,8 @@
put_again:
#ifdef CONFIG_SMP
br_read_lock(&vfsmount_lock);
- if (likely(atomic_read(&mnt->mnt_longterm))) {
+ if (likely(mnt->mnt_ns)) {
+ /* shouldn't be the last one */
mnt_add_count(mnt, -1);
br_read_unlock(&vfsmount_lock);
return;
@@ -939,7 +939,7 @@
/* iterator; we want it to have access to namespace_sem, thus here... */
static void *m_start(struct seq_file *m, loff_t *pos)
{
- struct proc_mounts *p = container_of(m, struct proc_mounts, m);
+ struct proc_mounts *p = proc_mounts(m);
down_read(&namespace_sem);
return seq_list_start(&p->ns->list, *pos);
@@ -947,7 +947,7 @@
static void *m_next(struct seq_file *m, void *v, loff_t *pos)
{
- struct proc_mounts *p = container_of(m, struct proc_mounts, m);
+ struct proc_mounts *p = proc_mounts(m);
return seq_list_next(v, &p->ns->list, pos);
}
@@ -959,7 +959,7 @@
static int m_show(struct seq_file *m, void *v)
{
- struct proc_mounts *p = container_of(m, struct proc_mounts, m);
+ struct proc_mounts *p = proc_mounts(m);
struct mount *r = list_entry(v, struct mount, mnt_list);
return p->show(m, &r->mnt);
}
@@ -1074,8 +1074,6 @@
list_del_init(&p->mnt_expire);
list_del_init(&p->mnt_list);
__touch_mnt_namespace(p->mnt_ns);
- if (p->mnt_ns)
- __mnt_make_shortterm(p);
p->mnt_ns = NULL;
list_del_init(&p->mnt_child);
if (mnt_has_parent(p)) {
@@ -1260,11 +1258,12 @@
struct path path;
if (!(flag & CL_COPY_ALL) && IS_MNT_UNBINDABLE(mnt))
- return NULL;
+ return ERR_PTR(-EINVAL);
res = q = clone_mnt(mnt, dentry, flag);
- if (!q)
- goto Enomem;
+ if (IS_ERR(q))
+ return q;
+
q->mnt_mountpoint = mnt->mnt_mountpoint;
p = mnt;
@@ -1286,8 +1285,8 @@
path.mnt = &q->mnt;
path.dentry = p->mnt_mountpoint;
q = clone_mnt(p, p->mnt.mnt_root, flag);
- if (!q)
- goto Enomem;
+ if (IS_ERR(q))
+ goto out;
br_write_lock(&vfsmount_lock);
list_add_tail(&q->mnt_list, &res->mnt_list);
attach_mnt(q, &path);
@@ -1295,7 +1294,7 @@
}
}
return res;
-Enomem:
+out:
if (res) {
LIST_HEAD(umount_list);
br_write_lock(&vfsmount_lock);
@@ -1303,9 +1302,11 @@
br_write_unlock(&vfsmount_lock);
release_mounts(&umount_list);
}
- return NULL;
+ return q;
}
+/* Caller should check returned pointer for errors */
+
struct vfsmount *collect_mounts(struct path *path)
{
struct mount *tree;
@@ -1313,7 +1314,9 @@
tree = copy_tree(real_mount(path->mnt), path->dentry,
CL_COPY_ALL | CL_PRIVATE);
up_write(&namespace_sem);
- return tree ? &tree->mnt : NULL;
+ if (IS_ERR(tree))
+ return NULL;
+ return &tree->mnt;
}
void drop_collected_mounts(struct vfsmount *mnt)
@@ -1608,14 +1611,15 @@
if (!check_mnt(real_mount(path->mnt)) || !check_mnt(old))
goto out2;
- err = -ENOMEM;
if (recurse)
mnt = copy_tree(old, old_path.dentry, 0);
else
mnt = clone_mnt(old, old_path.dentry, 0);
- if (!mnt)
- goto out2;
+ if (IS_ERR(mnt)) {
+ err = PTR_ERR(mnt);
+ goto out;
+ }
err = graft_tree(mnt, path);
if (err) {
@@ -2209,23 +2213,6 @@
return new_ns;
}
-void mnt_make_longterm(struct vfsmount *mnt)
-{
- __mnt_make_longterm(real_mount(mnt));
-}
-
-void mnt_make_shortterm(struct vfsmount *m)
-{
-#ifdef CONFIG_SMP
- struct mount *mnt = real_mount(m);
- if (atomic_add_unless(&mnt->mnt_longterm, -1, 1))
- return;
- br_write_lock(&vfsmount_lock);
- atomic_dec(&mnt->mnt_longterm);
- br_write_unlock(&vfsmount_lock);
-#endif
-}
-
/*
* Allocate a new namespace structure and populate it with contents
* copied from the namespace of the passed in task structure.
@@ -2246,10 +2233,10 @@
down_write(&namespace_sem);
/* First pass: copy the tree topology */
new = copy_tree(old, old->mnt.mnt_root, CL_COPY_ALL | CL_EXPIRE);
- if (!new) {
+ if (IS_ERR(new)) {
up_write(&namespace_sem);
kfree(new_ns);
- return ERR_PTR(-ENOMEM);
+ return ERR_CAST(new);
}
new_ns->root = new;
br_write_lock(&vfsmount_lock);
@@ -2265,18 +2252,13 @@
q = new;
while (p) {
q->mnt_ns = new_ns;
- __mnt_make_longterm(q);
if (fs) {
if (&p->mnt == fs->root.mnt) {
fs->root.mnt = mntget(&q->mnt);
- __mnt_make_longterm(q);
- mnt_make_shortterm(&p->mnt);
rootmnt = &p->mnt;
}
if (&p->mnt == fs->pwd.mnt) {
fs->pwd.mnt = mntget(&q->mnt);
- __mnt_make_longterm(q);
- mnt_make_shortterm(&p->mnt);
pwdmnt = &p->mnt;
}
}
@@ -2320,7 +2302,6 @@
if (!IS_ERR(new_ns)) {
struct mount *mnt = real_mount(m);
mnt->mnt_ns = new_ns;
- __mnt_make_longterm(mnt);
new_ns->root = mnt;
list_add(&new_ns->list, &mnt->mnt_list);
} else {
@@ -2615,7 +2596,7 @@
* it is a longterm mount, don't release mnt until
* we unmount before file sys is unregistered
*/
- mnt_make_longterm(mnt);
+ real_mount(mnt)->mnt_ns = MNT_NS_INTERNAL;
}
return mnt;
}
@@ -2625,7 +2606,9 @@
{
/* release long term mount so mount point can be released */
if (!IS_ERR_OR_NULL(mnt)) {
- mnt_make_shortterm(mnt);
+ br_write_lock(&vfsmount_lock);
+ real_mount(mnt)->mnt_ns = NULL;
+ br_write_unlock(&vfsmount_lock);
mntput(mnt);
}
}
diff --git a/fs/ncpfs/dir.c b/fs/ncpfs/dir.c
index aeed93a..4117e7b 100644
--- a/fs/ncpfs/dir.c
+++ b/fs/ncpfs/dir.c
@@ -30,8 +30,8 @@
static int ncp_readdir(struct file *, void *, filldir_t);
-static int ncp_create(struct inode *, struct dentry *, umode_t, struct nameidata *);
-static struct dentry *ncp_lookup(struct inode *, struct dentry *, struct nameidata *);
+static int ncp_create(struct inode *, struct dentry *, umode_t, bool);
+static struct dentry *ncp_lookup(struct inode *, struct dentry *, unsigned int);
static int ncp_unlink(struct inode *, struct dentry *);
static int ncp_mkdir(struct inode *, struct dentry *, umode_t);
static int ncp_rmdir(struct inode *, struct dentry *);
@@ -72,7 +72,7 @@
/*
* Dentry operations routines
*/
-static int ncp_lookup_validate(struct dentry *, struct nameidata *);
+static int ncp_lookup_validate(struct dentry *, unsigned int);
static int ncp_hash_dentry(const struct dentry *, const struct inode *,
struct qstr *);
static int ncp_compare_dentry(const struct dentry *, const struct inode *,
@@ -290,7 +290,7 @@
static int
-ncp_lookup_validate(struct dentry *dentry, struct nameidata *nd)
+ncp_lookup_validate(struct dentry *dentry, unsigned int flags)
{
struct ncp_server *server;
struct dentry *parent;
@@ -302,7 +302,7 @@
if (dentry == dentry->d_sb->s_root)
return 1;
- if (nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
parent = dget_parent(dentry);
@@ -836,7 +836,7 @@
return result;
}
-static struct dentry *ncp_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
+static struct dentry *ncp_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
{
struct ncp_server *server = NCP_SERVER(dir);
struct inode *inode = NULL;
@@ -980,7 +980,7 @@
}
static int ncp_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
return ncp_create_new(dir, dentry, mode, 0, 0);
}
diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c
index 970659d..23ff18f 100644
--- a/fs/nfs/callback.c
+++ b/fs/nfs/callback.c
@@ -17,7 +17,6 @@
#include <linux/kthread.h>
#include <linux/sunrpc/svcauth_gss.h>
#include <linux/sunrpc/bc_xprt.h>
-#include <linux/nsproxy.h>
#include <net/inet_sock.h>
@@ -107,7 +106,7 @@
{
int ret;
- ret = svc_create_xprt(serv, "tcp", xprt->xprt_net, PF_INET,
+ ret = svc_create_xprt(serv, "tcp", &init_net, PF_INET,
nfs_callback_set_tcpport, SVC_SOCK_ANONYMOUS);
if (ret <= 0)
goto out_err;
@@ -115,7 +114,7 @@
dprintk("NFS: Callback listener port = %u (af %u)\n",
nfs_callback_tcpport, PF_INET);
- ret = svc_create_xprt(serv, "tcp", xprt->xprt_net, PF_INET6,
+ ret = svc_create_xprt(serv, "tcp", &init_net, PF_INET6,
nfs_callback_set_tcpport, SVC_SOCK_ANONYMOUS);
if (ret > 0) {
nfs_callback_tcpport6 = ret;
@@ -184,7 +183,7 @@
* fore channel connection.
* Returns the input port (0) and sets the svc_serv bc_xprt on success
*/
- ret = svc_create_xprt(serv, "tcp-bc", xprt->xprt_net, PF_INET, 0,
+ ret = svc_create_xprt(serv, "tcp-bc", &init_net, PF_INET, 0,
SVC_SOCK_ANONYMOUS);
if (ret < 0) {
rqstp = ERR_PTR(ret);
@@ -254,7 +253,7 @@
char svc_name[12];
int ret = 0;
int minorversion_setup;
- struct net *net = current->nsproxy->net_ns;
+ struct net *net = &init_net;
mutex_lock(&nfs_callback_mutex);
if (cb_info->users++ || cb_info->task != NULL) {
@@ -330,7 +329,7 @@
cb_info->users--;
if (cb_info->users == 0 && cb_info->task != NULL) {
kthread_stop(cb_info->task);
- svc_shutdown_net(cb_info->serv, current->nsproxy->net_ns);
+ svc_shutdown_net(cb_info->serv, &init_net);
svc_exit_thread(cb_info->rqst);
cb_info->serv = NULL;
cb_info->rqst = NULL;
diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c
index 95bfc24..e64b01d 100644
--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -455,9 +455,9 @@
args->csa_nrclists = ntohl(*p++);
args->csa_rclists = NULL;
if (args->csa_nrclists) {
- args->csa_rclists = kmalloc(args->csa_nrclists *
- sizeof(*args->csa_rclists),
- GFP_KERNEL);
+ args->csa_rclists = kmalloc_array(args->csa_nrclists,
+ sizeof(*args->csa_rclists),
+ GFP_KERNEL);
if (unlikely(args->csa_rclists == NULL))
goto out;
@@ -696,7 +696,7 @@
const struct cb_sequenceres *res)
{
__be32 *p;
- unsigned status = res->csr_status;
+ __be32 status = res->csr_status;
if (unlikely(status != 0))
goto out;
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 7d10875..f005b5b 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -207,7 +207,6 @@
static void nfs4_shutdown_session(struct nfs_client *clp)
{
if (nfs4_has_session(clp)) {
- nfs4_deviceid_purge_client(clp);
nfs4_destroy_session(clp->cl_session);
nfs4_destroy_clientid(clp);
}
@@ -544,8 +543,6 @@
smp_rmb();
- BUG_ON(clp->cl_cons_state != NFS_CS_READY);
-
dprintk("<-- %s found nfs_client %p for %s\n",
__func__, clp, cl_init->hostname ?: "");
return clp;
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index f430057..a6b1c7f 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -46,8 +46,8 @@
static int nfs_opendir(struct inode *, struct file *);
static int nfs_closedir(struct inode *, struct file *);
static int nfs_readdir(struct file *, void *, filldir_t);
-static struct dentry *nfs_lookup(struct inode *, struct dentry *, struct nameidata *);
-static int nfs_create(struct inode *, struct dentry *, umode_t, struct nameidata *);
+static struct dentry *nfs_lookup(struct inode *, struct dentry *, unsigned int);
+static int nfs_create(struct inode *, struct dentry *, umode_t, bool);
static int nfs_mkdir(struct inode *, struct dentry *, umode_t);
static int nfs_rmdir(struct inode *, struct dentry *);
static int nfs_unlink(struct inode *, struct dentry *);
@@ -111,11 +111,13 @@
#ifdef CONFIG_NFS_V4
-static struct dentry *nfs_atomic_lookup(struct inode *, struct dentry *, struct nameidata *);
-static int nfs_open_create(struct inode *dir, struct dentry *dentry, umode_t mode, struct nameidata *nd);
+static int nfs_atomic_open(struct inode *, struct dentry *,
+ struct file *, unsigned, umode_t,
+ int *);
const struct inode_operations nfs4_dir_inode_operations = {
- .create = nfs_open_create,
- .lookup = nfs_atomic_lookup,
+ .create = nfs_create,
+ .lookup = nfs_lookup,
+ .atomic_open = nfs_atomic_open,
.link = nfs_link,
.unlink = nfs_unlink,
.symlink = nfs_symlink,
@@ -1029,27 +1031,14 @@
}
/*
- * Return the intent data that applies to this particular path component
- *
- * Note that the current set of intents only apply to the very last
- * component of the path and none of them is set before that last
- * component.
- */
-static inline unsigned int nfs_lookup_check_intent(struct nameidata *nd,
- unsigned int mask)
-{
- return nd->flags & mask;
-}
-
-/*
* Use intent information to check whether or not we're going to do
* an O_EXCL create using this path component.
*/
-static int nfs_is_exclusive_create(struct inode *dir, struct nameidata *nd)
+static int nfs_is_exclusive_create(struct inode *dir, unsigned int flags)
{
if (NFS_PROTO(dir)->version == 2)
return 0;
- return nd && nfs_lookup_check_intent(nd, LOOKUP_EXCL);
+ return flags & LOOKUP_EXCL;
}
/*
@@ -1061,25 +1050,20 @@
*
*/
static inline
-int nfs_lookup_verify_inode(struct inode *inode, struct nameidata *nd)
+int nfs_lookup_verify_inode(struct inode *inode, unsigned int flags)
{
struct nfs_server *server = NFS_SERVER(inode);
if (IS_AUTOMOUNT(inode))
return 0;
- if (nd != NULL) {
- /* VFS wants an on-the-wire revalidation */
- if (nd->flags & LOOKUP_REVAL)
- goto out_force;
- /* This is an open(2) */
- if (nfs_lookup_check_intent(nd, LOOKUP_OPEN) != 0 &&
- !(server->flags & NFS_MOUNT_NOCTO) &&
- (S_ISREG(inode->i_mode) ||
- S_ISDIR(inode->i_mode)))
- goto out_force;
- return 0;
- }
- return nfs_revalidate_inode(server, inode);
+ /* VFS wants an on-the-wire revalidation */
+ if (flags & LOOKUP_REVAL)
+ goto out_force;
+ /* This is an open(2) */
+ if ((flags & LOOKUP_OPEN) && !(server->flags & NFS_MOUNT_NOCTO) &&
+ (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode)))
+ goto out_force;
+ return 0;
out_force:
return __nfs_revalidate_inode(server, inode);
}
@@ -1093,10 +1077,10 @@
*/
static inline
int nfs_neg_need_reval(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
/* Don't revalidate a negative dentry if we're creating a new file */
- if (nd != NULL && nfs_lookup_check_intent(nd, LOOKUP_CREATE) != 0)
+ if (flags & LOOKUP_CREATE)
return 0;
if (NFS_SERVER(dir)->flags & NFS_MOUNT_LOOKUP_CACHE_NONEG)
return 1;
@@ -1114,7 +1098,7 @@
* If the parent directory is seen to have changed, we throw out the
* cached dentry and do a new lookup.
*/
-static int nfs_lookup_revalidate(struct dentry *dentry, struct nameidata *nd)
+static int nfs_lookup_revalidate(struct dentry *dentry, unsigned int flags)
{
struct inode *dir;
struct inode *inode;
@@ -1123,7 +1107,7 @@
struct nfs_fattr *fattr = NULL;
int error;
- if (nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
parent = dget_parent(dentry);
@@ -1132,7 +1116,7 @@
inode = dentry->d_inode;
if (!inode) {
- if (nfs_neg_need_reval(dir, dentry, nd))
+ if (nfs_neg_need_reval(dir, dentry, flags))
goto out_bad;
goto out_valid_noent;
}
@@ -1148,8 +1132,8 @@
goto out_set_verifier;
/* Force a full look up iff the parent directory has changed */
- if (!nfs_is_exclusive_create(dir, nd) && nfs_check_verifier(dir, dentry)) {
- if (nfs_lookup_verify_inode(inode, nd))
+ if (!nfs_is_exclusive_create(dir, flags) && nfs_check_verifier(dir, dentry)) {
+ if (nfs_lookup_verify_inode(inode, flags))
goto out_zap_parent;
goto out_valid;
}
@@ -1286,7 +1270,7 @@
.d_release = nfs_d_release,
};
-static struct dentry *nfs_lookup(struct inode *dir, struct dentry * dentry, struct nameidata *nd)
+static struct dentry *nfs_lookup(struct inode *dir, struct dentry * dentry, unsigned int flags)
{
struct dentry *res;
struct dentry *parent;
@@ -1307,7 +1291,7 @@
* If we're doing an exclusive create, optimize away the lookup
* but don't hash the dentry.
*/
- if (nfs_is_exclusive_create(dir, nd)) {
+ if (nfs_is_exclusive_create(dir, flags)) {
d_instantiate(dentry, NULL);
res = NULL;
goto out;
@@ -1354,7 +1338,7 @@
}
#ifdef CONFIG_NFS_V4
-static int nfs4_lookup_revalidate(struct dentry *, struct nameidata *);
+static int nfs4_lookup_revalidate(struct dentry *, unsigned int);
const struct dentry_operations nfs4_dentry_operations = {
.d_revalidate = nfs4_lookup_revalidate,
@@ -1364,24 +1348,6 @@
.d_release = nfs_d_release,
};
-/*
- * Use intent information to determine whether we need to substitute
- * the NFSv4-style stateful OPEN for the LOOKUP call
- */
-static int is_atomic_open(struct nameidata *nd)
-{
- if (nd == NULL || nfs_lookup_check_intent(nd, LOOKUP_OPEN) == 0)
- return 0;
- /* NFS does not (yet) have a stateful open for directories */
- if (nd->flags & LOOKUP_DIRECTORY)
- return 0;
- /* Are we trying to write to a read only partition? */
- if (__mnt_is_readonly(nd->path.mnt) &&
- (nd->intent.open.flags & (O_CREAT|O_TRUNC|O_ACCMODE)))
- return 0;
- return 1;
-}
-
static fmode_t flags_to_mode(int flags)
{
fmode_t res = (__force fmode_t)flags & FMODE_EXEC;
@@ -1403,136 +1369,143 @@
return 0;
}
-static int nfs_intent_set_file(struct nameidata *nd, struct nfs_open_context *ctx)
+static int nfs_finish_open(struct nfs_open_context *ctx,
+ struct dentry *dentry,
+ struct file *file, unsigned open_flags,
+ int *opened)
{
- struct file *filp;
- int ret = 0;
+ int err;
+
+ if (ctx->dentry != dentry) {
+ dput(ctx->dentry);
+ ctx->dentry = dget(dentry);
+ }
/* If the open_intent is for execute, we have an extra check to make */
if (ctx->mode & FMODE_EXEC) {
- ret = nfs_may_open(ctx->dentry->d_inode,
- ctx->cred,
- nd->intent.open.flags);
- if (ret < 0)
+ err = nfs_may_open(dentry->d_inode, ctx->cred, open_flags);
+ if (err < 0)
goto out;
}
- filp = lookup_instantiate_filp(nd, ctx->dentry, do_open);
- if (IS_ERR(filp))
- ret = PTR_ERR(filp);
- else
- nfs_file_set_open_context(filp, ctx);
+
+ err = finish_open(file, dentry, do_open, opened);
+ if (err)
+ goto out;
+ nfs_file_set_open_context(file, ctx);
+
out:
put_nfs_open_context(ctx);
- return ret;
+ return err;
}
-static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
+static int nfs_atomic_open(struct inode *dir, struct dentry *dentry,
+ struct file *file, unsigned open_flags,
+ umode_t mode, int *opened)
{
struct nfs_open_context *ctx;
- struct iattr attr;
- struct dentry *res = NULL;
+ struct dentry *res;
+ struct iattr attr = { .ia_valid = ATTR_OPEN };
struct inode *inode;
- int open_flags;
int err;
- dfprintk(VFS, "NFS: atomic_lookup(%s/%ld), %s\n",
+ /* Expect a negative dentry */
+ BUG_ON(dentry->d_inode);
+
+ dfprintk(VFS, "NFS: atomic_open(%s/%ld), %s\n",
dir->i_sb->s_id, dir->i_ino, dentry->d_name.name);
- /* Check that we are indeed trying to open this file */
- if (!is_atomic_open(nd))
+ /* NFS only supports OPEN on regular files */
+ if ((open_flags & O_DIRECTORY)) {
+ if (!d_unhashed(dentry)) {
+ /*
+ * Hashed negative dentry with O_DIRECTORY: dentry was
+ * revalidated and is fine, no need to perform lookup
+ * again
+ */
+ return -ENOENT;
+ }
goto no_open;
-
- if (dentry->d_name.len > NFS_SERVER(dir)->namelen) {
- res = ERR_PTR(-ENAMETOOLONG);
- goto out;
}
- /* Let vfs_create() deal with O_EXCL. Instantiate, but don't hash
- * the dentry. */
- if (nd->flags & LOOKUP_EXCL) {
- d_instantiate(dentry, NULL);
- goto out;
- }
+ if (dentry->d_name.len > NFS_SERVER(dir)->namelen)
+ return -ENAMETOOLONG;
- open_flags = nd->intent.open.flags;
- attr.ia_valid = ATTR_OPEN;
-
- ctx = create_nfs_open_context(dentry, open_flags);
- res = ERR_CAST(ctx);
- if (IS_ERR(ctx))
- goto out;
-
- if (nd->flags & LOOKUP_CREATE) {
- attr.ia_mode = nd->intent.open.create_mode;
+ if (open_flags & O_CREAT) {
attr.ia_valid |= ATTR_MODE;
- attr.ia_mode &= ~current_umask();
- } else
- open_flags &= ~(O_EXCL | O_CREAT);
-
+ attr.ia_mode = mode & ~current_umask();
+ }
if (open_flags & O_TRUNC) {
attr.ia_valid |= ATTR_SIZE;
attr.ia_size = 0;
}
- /* Open the file on the server */
+ ctx = create_nfs_open_context(dentry, open_flags);
+ err = PTR_ERR(ctx);
+ if (IS_ERR(ctx))
+ goto out;
+
nfs_block_sillyrename(dentry->d_parent);
inode = NFS_PROTO(dir)->open_context(dir, ctx, open_flags, &attr);
+ d_drop(dentry);
if (IS_ERR(inode)) {
nfs_unblock_sillyrename(dentry->d_parent);
put_nfs_open_context(ctx);
- switch (PTR_ERR(inode)) {
- /* Make a negative dentry */
- case -ENOENT:
- d_add(dentry, NULL);
- res = NULL;
- goto out;
- /* This turned out not to be a regular file */
- case -EISDIR:
- case -ENOTDIR:
+ err = PTR_ERR(inode);
+ switch (err) {
+ case -ENOENT:
+ d_add(dentry, NULL);
+ break;
+ case -EISDIR:
+ case -ENOTDIR:
+ goto no_open;
+ case -ELOOP:
+ if (!(open_flags & O_NOFOLLOW))
goto no_open;
- case -ELOOP:
- if (!(nd->intent.open.flags & O_NOFOLLOW))
- goto no_open;
+ break;
/* case -EINVAL: */
- default:
- res = ERR_CAST(inode);
- goto out;
+ default:
+ break;
}
+ goto out;
}
res = d_add_unique(dentry, inode);
- nfs_unblock_sillyrename(dentry->d_parent);
- if (res != NULL) {
- dput(ctx->dentry);
- ctx->dentry = dget(res);
+ if (res != NULL)
dentry = res;
- }
- err = nfs_intent_set_file(nd, ctx);
- if (err < 0) {
- if (res != NULL)
- dput(res);
- return ERR_PTR(err);
- }
-out:
+
+ nfs_unblock_sillyrename(dentry->d_parent);
nfs_set_verifier(dentry, nfs_save_change_attribute(dir));
- return res;
+
+ err = nfs_finish_open(ctx, dentry, file, open_flags, opened);
+
+ dput(res);
+out:
+ return err;
+
no_open:
- return nfs_lookup(dir, dentry, nd);
+ res = nfs_lookup(dir, dentry, 0);
+ err = PTR_ERR(res);
+ if (IS_ERR(res))
+ goto out;
+
+ return finish_no_open(file, res);
}
-static int nfs4_lookup_revalidate(struct dentry *dentry, struct nameidata *nd)
+static int nfs4_lookup_revalidate(struct dentry *dentry, unsigned int flags)
{
struct dentry *parent = NULL;
struct inode *inode;
struct inode *dir;
- int openflags, ret = 0;
+ int ret = 0;
- if (nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
- inode = dentry->d_inode;
- if (!is_atomic_open(nd) || d_mountpoint(dentry))
+ if (!(flags & LOOKUP_OPEN) || (flags & LOOKUP_DIRECTORY))
+ goto no_open;
+ if (d_mountpoint(dentry))
goto no_open;
+ inode = dentry->d_inode;
parent = dget_parent(dentry);
dir = parent->d_inode;
@@ -1540,7 +1513,7 @@
* optimize away revalidation of negative dentries.
*/
if (inode == NULL) {
- if (!nfs_neg_need_reval(dir, dentry, nd))
+ if (!nfs_neg_need_reval(dir, dentry, flags))
ret = 1;
goto out;
}
@@ -1548,9 +1521,8 @@
/* NFS only supports OPEN on regular files */
if (!S_ISREG(inode->i_mode))
goto no_open_dput;
- openflags = nd->intent.open.flags;
/* We cannot do exclusive creation on a positive dentry */
- if ((openflags & (O_CREAT|O_EXCL)) == (O_CREAT|O_EXCL))
+ if (flags & LOOKUP_EXCL)
goto no_open_dput;
/* Let f_op->open() actually open (and revalidate) the file */
@@ -1563,48 +1535,7 @@
no_open_dput:
dput(parent);
no_open:
- return nfs_lookup_revalidate(dentry, nd);
-}
-
-static int nfs_open_create(struct inode *dir, struct dentry *dentry,
- umode_t mode, struct nameidata *nd)
-{
- struct nfs_open_context *ctx = NULL;
- struct iattr attr;
- int error;
- int open_flags = O_CREAT|O_EXCL;
-
- dfprintk(VFS, "NFS: create(%s/%ld), %s\n",
- dir->i_sb->s_id, dir->i_ino, dentry->d_name.name);
-
- attr.ia_mode = mode;
- attr.ia_valid = ATTR_MODE;
-
- if (nd)
- open_flags = nd->intent.open.flags;
-
- ctx = create_nfs_open_context(dentry, open_flags);
- error = PTR_ERR(ctx);
- if (IS_ERR(ctx))
- goto out_err_drop;
-
- error = NFS_PROTO(dir)->create(dir, dentry, &attr, open_flags, ctx);
- if (error != 0)
- goto out_put_ctx;
- if (nd) {
- error = nfs_intent_set_file(nd, ctx);
- if (error < 0)
- goto out_err;
- } else {
- put_nfs_open_context(ctx);
- }
- return 0;
-out_put_ctx:
- put_nfs_open_context(ctx);
-out_err_drop:
- d_drop(dentry);
-out_err:
- return error;
+ return nfs_lookup_revalidate(dentry, flags);
}
#endif /* CONFIG_NFSV4 */
@@ -1658,11 +1589,11 @@
* reply path made it appear to have failed.
*/
static int nfs_create(struct inode *dir, struct dentry *dentry,
- umode_t mode, struct nameidata *nd)
+ umode_t mode, bool excl)
{
struct iattr attr;
+ int open_flags = excl ? O_CREAT | O_EXCL : O_CREAT;
int error;
- int open_flags = O_CREAT|O_EXCL;
dfprintk(VFS, "NFS: create(%s/%ld), %s\n",
dir->i_sb->s_id, dir->i_ino, dentry->d_name.name);
@@ -1670,10 +1601,7 @@
attr.ia_mode = mode;
attr.ia_valid = ATTR_MODE;
- if (nd)
- open_flags = nd->intent.open.flags;
-
- error = NFS_PROTO(dir)->create(dir, dentry, &attr, open_flags, NULL);
+ error = NFS_PROTO(dir)->create(dir, dentry, &attr, open_flags);
if (error != 0)
goto out_err;
return 0;
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index ad2775d..4825337 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -484,17 +484,22 @@
list_for_each_entry_safe(req, tmp, &reqs, wb_list) {
if (!nfs_pageio_add_request(&desc, req)) {
+ nfs_list_remove_request(req);
nfs_list_add_request(req, &failed);
spin_lock(cinfo.lock);
dreq->flags = 0;
dreq->error = -EIO;
spin_unlock(cinfo.lock);
}
+ nfs_release_request(req);
}
nfs_pageio_complete(&desc);
- while (!list_empty(&failed))
+ while (!list_empty(&failed)) {
+ req = nfs_list_entry(failed.next);
+ nfs_list_remove_request(req);
nfs_unlock_and_release_request(req);
+ }
if (put_dreq(dreq))
nfs_direct_write_complete(dreq, dreq->inode);
@@ -523,9 +528,9 @@
nfs_list_remove_request(req);
if (dreq->flags == NFS_ODIRECT_RESCHED_WRITES) {
/* Note the rewrite will go through mds */
- kref_get(&req->wb_kref);
nfs_mark_request_commit(req, NULL, &cinfo);
- }
+ } else
+ nfs_release_request(req);
nfs_unlock_and_release_request(req);
}
@@ -716,12 +721,12 @@
if (dreq->flags == NFS_ODIRECT_RESCHED_WRITES)
bit = NFS_IOHDR_NEED_RESCHED;
else if (dreq->flags == 0) {
- memcpy(&dreq->verf, &req->wb_verf,
+ memcpy(&dreq->verf, hdr->verf,
sizeof(dreq->verf));
bit = NFS_IOHDR_NEED_COMMIT;
dreq->flags = NFS_ODIRECT_DO_COMMIT;
} else if (dreq->flags == NFS_ODIRECT_DO_COMMIT) {
- if (memcmp(&dreq->verf, &req->wb_verf, sizeof(dreq->verf))) {
+ if (memcmp(&dreq->verf, hdr->verf, sizeof(dreq->verf))) {
dreq->flags = NFS_ODIRECT_RESCHED_WRITES;
bit = NFS_IOHDR_NEED_RESCHED;
} else
diff --git a/fs/nfs/getroot.c b/fs/nfs/getroot.c
index 8abfb19..a67990f 100644
--- a/fs/nfs/getroot.c
+++ b/fs/nfs/getroot.c
@@ -62,7 +62,7 @@
*/
spin_lock(&sb->s_root->d_inode->i_lock);
spin_lock(&sb->s_root->d_lock);
- list_del_init(&sb->s_root->d_alias);
+ hlist_del_init(&sb->s_root->d_alias);
spin_unlock(&sb->s_root->d_lock);
spin_unlock(&sb->s_root->d_inode->i_lock);
}
diff --git a/fs/nfs/idmap.c b/fs/nfs/idmap.c
index b5b86a0..864c51e 100644
--- a/fs/nfs/idmap.c
+++ b/fs/nfs/idmap.c
@@ -57,6 +57,11 @@
static const struct cred *id_resolver_cache;
static struct key_type key_type_id_resolver_legacy;
+struct idmap {
+ struct rpc_pipe *idmap_pipe;
+ struct key_construction *idmap_key_cons;
+ struct mutex idmap_mutex;
+};
/**
* nfs_fattr_init_names - initialise the nfs_fattr owner_name/group_name fields
@@ -310,9 +315,11 @@
name, namelen, type, data,
data_size, NULL);
if (ret < 0) {
+ mutex_lock(&idmap->idmap_mutex);
ret = nfs_idmap_request_key(&key_type_id_resolver_legacy,
name, namelen, type, data,
data_size, idmap);
+ mutex_unlock(&idmap->idmap_mutex);
}
return ret;
}
@@ -354,11 +361,6 @@
/* idmap classic begins here */
module_param(nfs_idmap_cache_timeout, int, 0644);
-struct idmap {
- struct rpc_pipe *idmap_pipe;
- struct key_construction *idmap_key_cons;
-};
-
enum {
Opt_find_uid, Opt_find_gid, Opt_find_user, Opt_find_group, Opt_find_err
};
@@ -469,6 +471,7 @@
return error;
}
idmap->idmap_pipe = pipe;
+ mutex_init(&idmap->idmap_mutex);
clp->cl_idmap = idmap;
return 0;
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index e605d69..f729698 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -1530,7 +1530,6 @@
nfsi->delegation_state = 0;
init_rwsem(&nfsi->rwsem);
nfsi->layout = NULL;
- atomic_set(&nfsi->commit_info.rpcs_out, 0);
#endif
}
@@ -1545,6 +1544,7 @@
INIT_LIST_HEAD(&nfsi->commit_info.list);
nfsi->npages = 0;
nfsi->commit_info.ncommit = 0;
+ atomic_set(&nfsi->commit_info.rpcs_out, 0);
atomic_set(&nfsi->silly_count, 1);
INIT_HLIST_HEAD(&nfsi->silly_list);
init_waitqueue_head(&nfsi->waitqueue);
diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c
index 2292a0f..3187e24 100644
--- a/fs/nfs/nfs3proc.c
+++ b/fs/nfs/nfs3proc.c
@@ -314,7 +314,7 @@
*/
static int
nfs3_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr,
- int flags, struct nfs_open_context *ctx)
+ int flags)
{
struct nfs3_createdata *data;
umode_t mode = sattr->ia_mode;
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index c6827f93..cc5900a 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -295,7 +295,7 @@
extern const struct nfs4_minor_version_ops *nfs_v4_minor_ops[];
-extern const u32 nfs4_fattr_bitmap[2];
+extern const u32 nfs4_fattr_bitmap[3];
extern const u32 nfs4_statfs_bitmap[2];
extern const u32 nfs4_pathconf_bitmap[2];
extern const u32 nfs4_fsinfo_bitmap[3];
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index d48dbef..c157b20 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -105,6 +105,8 @@
return -EINVAL;
case -NFS4ERR_SHARE_DENIED:
return -EACCES;
+ case -NFS4ERR_MINOR_VERS_MISMATCH:
+ return -EPROTONOSUPPORT;
default:
dprintk("%s could not handle NFSv4 error %d\n",
__func__, -err);
@@ -116,7 +118,7 @@
/*
* This is our standard bitmap for GETATTR requests.
*/
-const u32 nfs4_fattr_bitmap[2] = {
+const u32 nfs4_fattr_bitmap[3] = {
FATTR4_WORD0_TYPE
| FATTR4_WORD0_CHANGE
| FATTR4_WORD0_SIZE
@@ -133,6 +135,24 @@
| FATTR4_WORD1_TIME_MODIFY
};
+static const u32 nfs4_pnfs_open_bitmap[3] = {
+ FATTR4_WORD0_TYPE
+ | FATTR4_WORD0_CHANGE
+ | FATTR4_WORD0_SIZE
+ | FATTR4_WORD0_FSID
+ | FATTR4_WORD0_FILEID,
+ FATTR4_WORD1_MODE
+ | FATTR4_WORD1_NUMLINKS
+ | FATTR4_WORD1_OWNER
+ | FATTR4_WORD1_OWNER_GROUP
+ | FATTR4_WORD1_RAWDEV
+ | FATTR4_WORD1_SPACE_USED
+ | FATTR4_WORD1_TIME_ACCESS
+ | FATTR4_WORD1_TIME_METADATA
+ | FATTR4_WORD1_TIME_MODIFY,
+ FATTR4_WORD2_MDSTHRESHOLD
+};
+
const u32 nfs4_statfs_bitmap[2] = {
FATTR4_WORD0_FILES_AVAIL
| FATTR4_WORD0_FILES_FREE
@@ -844,6 +864,7 @@
p->o_arg.name = &dentry->d_name;
p->o_arg.server = server;
p->o_arg.bitmask = server->attr_bitmask;
+ p->o_arg.open_bitmap = &nfs4_fattr_bitmap[0];
p->o_arg.claim = NFS4_OPEN_CLAIM_NULL;
if (attrs != NULL && attrs->ia_valid != 0) {
__be32 verf[2];
@@ -1820,6 +1841,7 @@
opendata->f_attr.mdsthreshold = pnfs_mdsthreshold_alloc();
if (!opendata->f_attr.mdsthreshold)
goto err_opendata_put;
+ opendata->o_arg.open_bitmap = &nfs4_pnfs_open_bitmap[0];
}
if (dentry->d_inode != NULL)
opendata->state = nfs4_get_open_state(dentry->d_inode, sp);
@@ -1880,6 +1902,7 @@
struct nfs4_state *res;
int status;
+ fmode &= FMODE_READ|FMODE_WRITE;
do {
status = _nfs4_do_open(dir, dentry, fmode, flags, sattr, cred,
&res, ctx_th);
@@ -2526,6 +2549,14 @@
nfs_fattr_init(fattr);
+ /* Deal with open(O_TRUNC) */
+ if (sattr->ia_valid & ATTR_OPEN)
+ sattr->ia_valid &= ~(ATTR_MTIME|ATTR_CTIME|ATTR_OPEN);
+
+ /* Optimization: if the end result is no change, don't RPC */
+ if ((sattr->ia_valid & ~(ATTR_FILE)) == 0)
+ return 0;
+
/* Search for an existing open(O_WRITE) file */
if (sattr->ia_valid & ATTR_FILE) {
struct nfs_open_context *ctx;
@@ -2537,10 +2568,6 @@
}
}
- /* Deal with open(O_TRUNC) */
- if (sattr->ia_valid & ATTR_OPEN)
- sattr->ia_valid &= ~(ATTR_MTIME|ATTR_CTIME|ATTR_OPEN);
-
status = nfs4_do_setattr(inode, cred, fattr, sattr, state);
if (status == 0)
nfs_setattr_update_inode(inode, sattr);
@@ -2779,37 +2806,22 @@
}
/*
- * Got race?
- * We will need to arrange for the VFS layer to provide an atomic open.
- * Until then, this create/open method is prone to inefficiency and race
- * conditions due to the lookup, create, and open VFS calls from sys_open()
- * placed on the wire.
- *
- * Given the above sorry state of affairs, I'm simply sending an OPEN.
- * The file will be opened again in the subsequent VFS open call
- * (nfs4_proc_file_open).
- *
- * The open for read will just hang around to be used by any process that
- * opens the file O_RDONLY. This will all be resolved with the VFS changes.
+ * This is just for mknod. open(O_CREAT) will always do ->open_context().
*/
-
static int
nfs4_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr,
- int flags, struct nfs_open_context *ctx)
+ int flags)
{
- struct dentry *de = dentry;
+ struct nfs_open_context *ctx;
struct nfs4_state *state;
- struct rpc_cred *cred = NULL;
- fmode_t fmode = 0;
int status = 0;
- if (ctx != NULL) {
- cred = ctx->cred;
- de = ctx->dentry;
- fmode = ctx->mode;
- }
+ ctx = alloc_nfs_open_context(dentry, FMODE_READ);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
sattr->ia_mode &= ~current_umask();
- state = nfs4_do_open(dir, de, fmode, flags, sattr, cred, NULL);
+ state = nfs4_do_open(dir, dentry, ctx->mode, flags, sattr, ctx->cred, NULL);
d_drop(dentry);
if (IS_ERR(state)) {
status = PTR_ERR(state);
@@ -2817,11 +2829,9 @@
}
d_add(dentry, igrab(state->inode));
nfs_set_verifier(dentry, nfs_save_change_attribute(dir));
- if (ctx != NULL)
- ctx->state = state;
- else
- nfs4_close_sync(state, fmode);
+ ctx->state = state;
out:
+ put_nfs_open_context(ctx);
return status;
}
@@ -5275,7 +5285,7 @@
status = rpc_call_sync(clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT);
if (status)
- pr_warn("NFS: Got error %d from the server %s on "
+ dprintk("NFS: Got error %d from the server %s on "
"DESTROY_CLIENTID.", status, clp->cl_hostname);
return status;
}
@@ -5746,8 +5756,7 @@
status = rpc_call_sync(session->clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT);
if (status)
- printk(KERN_WARNING
- "NFS: Got error %d from the server on DESTROY_SESSION. "
+ dprintk("NFS: Got error %d from the server on DESTROY_SESSION. "
"Session has been destroyed regardless...\n", status);
dprintk("<-- nfs4_proc_destroy_session\n");
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index c679b9e..f38300e 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -244,6 +244,16 @@
return nfs4_wait_on_slot_tbl(&ses->fc_slot_table);
}
+static void nfs41_finish_session_reset(struct nfs_client *clp)
+{
+ clear_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state);
+ clear_bit(NFS4CLNT_SESSION_RESET, &clp->cl_state);
+ /* create_session negotiated new slot table */
+ clear_bit(NFS4CLNT_RECALL_SLOT, &clp->cl_state);
+ clear_bit(NFS4CLNT_BIND_CONN_TO_SESSION, &clp->cl_state);
+ nfs41_setup_state_renewal(clp);
+}
+
int nfs41_init_clientid(struct nfs_client *clp, struct rpc_cred *cred)
{
int status;
@@ -259,8 +269,7 @@
status = nfs4_proc_create_session(clp, cred);
if (status != 0)
goto out;
- clear_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state);
- nfs41_setup_state_renewal(clp);
+ nfs41_finish_session_reset(clp);
nfs_mark_client_ready(clp, NFS_CS_READY);
out:
return status;
@@ -1772,16 +1781,9 @@
status = nfs4_handle_reclaim_lease_error(clp, status);
goto out;
}
- clear_bit(NFS4CLNT_SESSION_RESET, &clp->cl_state);
- /* create_session negotiated new slot table */
- clear_bit(NFS4CLNT_RECALL_SLOT, &clp->cl_state);
- clear_bit(NFS4CLNT_BIND_CONN_TO_SESSION, &clp->cl_state);
+ nfs41_finish_session_reset(clp);
dprintk("%s: session reset was successful for server %s!\n",
__func__, clp->cl_hostname);
-
- /* Let the state manager reestablish state */
- if (!test_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state))
- nfs41_setup_state_renewal(clp);
out:
if (cred)
put_rpccred(cred);
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index ee4a74d..18fae29 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -1198,12 +1198,13 @@
}
static void encode_getfattr_open(struct xdr_stream *xdr, const u32 *bitmask,
+ const u32 *open_bitmap,
struct compound_hdr *hdr)
{
encode_getattr_three(xdr,
- bitmask[0] & nfs4_fattr_bitmap[0],
- bitmask[1] & nfs4_fattr_bitmap[1],
- bitmask[2] & FATTR4_WORD2_MDSTHRESHOLD,
+ bitmask[0] & open_bitmap[0],
+ bitmask[1] & open_bitmap[1],
+ bitmask[2] & open_bitmap[2],
hdr);
}
@@ -2221,7 +2222,7 @@
encode_putfh(xdr, args->fh, &hdr);
encode_open(xdr, args, &hdr);
encode_getfh(xdr, &hdr);
- encode_getfattr_open(xdr, args->bitmask, &hdr);
+ encode_getfattr_open(xdr, args->bitmask, args->open_bitmap, &hdr);
encode_nops(&hdr);
}
@@ -4359,7 +4360,10 @@
if (unlikely(bitmap[2] & (FATTR4_WORD2_MDSTHRESHOLD - 1U)))
return -EIO;
- if (likely(bitmap[2] & FATTR4_WORD2_MDSTHRESHOLD)) {
+ if (bitmap[2] & FATTR4_WORD2_MDSTHRESHOLD) {
+ /* Did the server return an unrequested attribute? */
+ if (unlikely(res == NULL))
+ return -EREMOTEIO;
p = xdr_inline_decode(xdr, 4);
if (unlikely(!p))
goto out_overflow;
@@ -4372,6 +4376,7 @@
__func__);
status = decode_first_threshold_item4(xdr, res);
+ bitmap[2] &= ~FATTR4_WORD2_MDSTHRESHOLD;
}
return status;
out_overflow:
diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c
index b47277ba..f50d3e8 100644
--- a/fs/nfs/objlayout/objio_osd.c
+++ b/fs/nfs/objlayout/objio_osd.c
@@ -454,7 +454,10 @@
objios->ios->done = _read_done;
dprintk("%s: offset=0x%llx length=0x%x\n", __func__,
rdata->args.offset, rdata->args.count);
- return ore_read(objios->ios);
+ ret = ore_read(objios->ios);
+ if (unlikely(ret))
+ objio_free_result(&objios->oir);
+ return ret;
}
/*
@@ -486,8 +489,16 @@
struct nfs_write_data *wdata = objios->oir.rpcdata;
struct address_space *mapping = wdata->header->inode->i_mapping;
pgoff_t index = offset / PAGE_SIZE;
- struct page *page = find_get_page(mapping, index);
+ struct page *page;
+ loff_t i_size = i_size_read(wdata->header->inode);
+ if (offset >= i_size) {
+ *uptodate = true;
+ dprintk("%s: g_zero_page index=0x%lx\n", __func__, index);
+ return ZERO_PAGE(0);
+ }
+
+ page = find_get_page(mapping, index);
if (!page) {
page = find_or_create_page(mapping, index, GFP_NOFS);
if (unlikely(!page)) {
@@ -507,8 +518,10 @@
static void __r4w_put_page(void *priv, struct page *page)
{
- dprintk("%s: index=0x%lx\n", __func__, page->index);
- page_cache_release(page);
+ dprintk("%s: index=0x%lx\n", __func__,
+ (page == ZERO_PAGE(0)) ? -1UL : page->index);
+ if (ZERO_PAGE(0) != page)
+ page_cache_release(page);
return;
}
@@ -539,8 +552,10 @@
dprintk("%s: offset=0x%llx length=0x%x\n", __func__,
wdata->args.offset, wdata->args.count);
ret = ore_write(objios->ios);
- if (unlikely(ret))
+ if (unlikely(ret)) {
+ objio_free_result(&objios->oir);
return ret;
+ }
if (objios->sync)
_write_done(objios->ios, objios);
diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index b8323aa..bbc49ca 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -70,6 +70,10 @@
spin_lock(&pnfs_spinlock);
local = find_pnfs_driver_locked(id);
+ if (local != NULL && !try_module_get(local->owner)) {
+ dprintk("%s: Could not grab reference on module\n", __func__);
+ local = NULL;
+ }
spin_unlock(&pnfs_spinlock);
return local;
}
@@ -80,6 +84,9 @@
if (nfss->pnfs_curr_ld) {
if (nfss->pnfs_curr_ld->clear_layoutdriver)
nfss->pnfs_curr_ld->clear_layoutdriver(nfss);
+ /* Decrement the MDS count. Purge the deviceid cache if zero */
+ if (atomic_dec_and_test(&nfss->nfs_client->cl_mds_count))
+ nfs4_deviceid_purge_client(nfss->nfs_client);
module_put(nfss->pnfs_curr_ld->owner);
}
nfss->pnfs_curr_ld = NULL;
@@ -115,10 +122,6 @@
goto out_no_driver;
}
}
- if (!try_module_get(ld_type->owner)) {
- dprintk("%s: Could not grab reference on module\n", __func__);
- goto out_no_driver;
- }
server->pnfs_curr_ld = ld_type;
if (ld_type->set_layoutdriver
&& ld_type->set_layoutdriver(server, mntfh)) {
@@ -127,6 +130,8 @@
module_put(ld_type->owner);
goto out_no_driver;
}
+ /* Bump the MDS count */
+ atomic_inc(&server->nfs_client->cl_mds_count);
dprintk("%s: pNFS module for %u set\n", __func__, id);
return;
diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h
index 29fd23c..64f90d8 100644
--- a/fs/nfs/pnfs.h
+++ b/fs/nfs/pnfs.h
@@ -365,7 +365,7 @@
pnfs_use_threshold(struct nfs4_threshold **dst, struct nfs4_threshold *src,
struct nfs_server *nfss)
{
- return (dst && src && src->bm != 0 &&
+ return (dst && src && src->bm != 0 && nfss->pnfs_curr_ld &&
nfss->pnfs_curr_ld->id == src->l_type);
}
diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c
index a706b6b..4433806 100644
--- a/fs/nfs/proc.c
+++ b/fs/nfs/proc.c
@@ -259,7 +259,7 @@
static int
nfs_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr,
- int flags, struct nfs_open_context *ctx)
+ int flags)
{
struct nfs_createdata *data;
struct rpc_message msg = {
@@ -651,7 +651,7 @@
/* Emulate the eof flag, which isn't normally needed in NFSv2
* as it is guaranteed to always return the file attributes
*/
- if (data->args.offset + data->args.count >= data->res.fattr->size)
+ if (data->args.offset + data->res.count >= data->res.fattr->size)
data->res.eof = 1;
}
return 0;
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index ff656c0..8b2a297 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1867,6 +1867,7 @@
if (data == NULL)
goto out_no_data;
+ args->version = NFS_DEFAULT_VERSION;
switch (data->version) {
case 1:
data->namlen = 0;
@@ -2418,7 +2419,7 @@
sb_mntdata.mntflags |= MS_SYNCHRONOUS;
/* Get a superblock - note that we may end up sharing one that already exists */
- s = sget(fs_type, compare_super, nfs_set_super, &sb_mntdata);
+ s = sget(fs_type, compare_super, nfs_set_super, flags, &sb_mntdata);
if (IS_ERR(s)) {
mntroot = ERR_CAST(s);
goto out_err_nosb;
@@ -2637,6 +2638,8 @@
if (data == NULL)
goto out_no_data;
+ args->version = 4;
+
switch (data->version) {
case 1:
if (data->host_addrlen > sizeof(args->nfs_server.address))
@@ -2857,6 +2860,8 @@
dfprintk(MOUNT, "--> nfs4_try_mount()\n");
+ mount_info->fill_super = nfs4_fill_super;
+
export_path = data->nfs_server.export_path;
data->nfs_server.export_path = "/";
root_mnt = nfs_do_root_mount(&nfs4_remote_fs_type, flags, mount_info,
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index e6fe3d6..4d6861c 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -80,6 +80,7 @@
INIT_LIST_HEAD(&hdr->rpc_list);
spin_lock_init(&hdr->lock);
atomic_set(&hdr->refcnt, 0);
+ hdr->verf = &p->verf;
}
return p;
}
@@ -619,6 +620,7 @@
goto next;
}
if (test_bit(NFS_IOHDR_NEED_COMMIT, &hdr->flags)) {
+ memcpy(&req->wb_verf, hdr->verf, sizeof(req->wb_verf));
nfs_mark_request_commit(req, hdr->lseg, &cinfo);
goto next;
}
@@ -1255,15 +1257,14 @@
struct nfs_write_data *data = calldata;
struct nfs_pgio_header *hdr = data->header;
int status = data->task.tk_status;
- struct nfs_page *req = hdr->req;
if ((status >= 0) && nfs_write_need_commit(data)) {
spin_lock(&hdr->lock);
if (test_bit(NFS_IOHDR_NEED_RESCHED, &hdr->flags))
; /* Do nothing */
else if (!test_and_set_bit(NFS_IOHDR_NEED_COMMIT, &hdr->flags))
- memcpy(&req->wb_verf, &data->verf, sizeof(req->wb_verf));
- else if (memcmp(&req->wb_verf, &data->verf, sizeof(req->wb_verf)))
+ memcpy(hdr->verf, &data->verf, sizeof(*hdr->verf));
+ else if (memcmp(hdr->verf, &data->verf, sizeof(*hdr->verf)))
set_bit(NFS_IOHDR_NEED_RESCHED, &hdr->flags);
spin_unlock(&hdr->lock);
}
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 8fdc9ec..94effd5 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -900,7 +900,7 @@
struct nfsd4_session *ses;
int mem;
- BUG_ON(!spin_is_locked(&client_lock));
+ lockdep_assert_held(&client_lock);
ses = container_of(kref, struct nfsd4_session, se_ref);
nfsd4_del_conns(ses);
spin_lock(&nfsd_drc_lock);
@@ -1080,7 +1080,7 @@
static inline void
free_client(struct nfs4_client *clp)
{
- BUG_ON(!spin_is_locked(&client_lock));
+ lockdep_assert_held(&client_lock);
while (!list_empty(&clp->cl_sessions)) {
struct nfsd4_session *ses;
ses = list_entry(clp->cl_sessions.next, struct nfsd4_session,
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index c8bd9c3..4700a0a 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -745,7 +745,7 @@
nfsd_open(struct svc_rqst *rqstp, struct svc_fh *fhp, umode_t type,
int may_flags, struct file **filp)
{
- struct dentry *dentry;
+ struct path path;
struct inode *inode;
int flags = O_RDONLY|O_LARGEFILE;
__be32 err;
@@ -762,8 +762,9 @@
if (err)
goto out;
- dentry = fhp->fh_dentry;
- inode = dentry->d_inode;
+ path.mnt = fhp->fh_export->ex_path.mnt;
+ path.dentry = fhp->fh_dentry;
+ inode = path.dentry->d_inode;
/* Disallow write access to files with the append-only bit set
* or any access when mandatory locking enabled
@@ -792,8 +793,7 @@
else
flags = O_WRONLY|O_LARGEFILE;
}
- *filp = dentry_open(dget(dentry), mntget(fhp->fh_export->ex_path.mnt),
- flags, current_cred());
+ *filp = dentry_open(&path, flags, current_cred());
if (IS_ERR(*filp))
host_err = PTR_ERR(*filp);
else {
@@ -1329,7 +1329,7 @@
err = 0;
switch (type) {
case S_IFREG:
- host_err = vfs_create(dirp, dchild, iap->ia_mode, NULL);
+ host_err = vfs_create(dirp, dchild, iap->ia_mode, true);
if (!host_err)
nfsd_check_ignore_resizing(iap);
break;
@@ -1492,7 +1492,7 @@
goto out;
}
- host_err = vfs_create(dirp, dchild, iap->ia_mode, NULL);
+ host_err = vfs_create(dirp, dchild, iap->ia_mode, true);
if (host_err < 0) {
fh_drop_write(fhp);
goto out_nfserr;
diff --git a/fs/nilfs2/gcinode.c b/fs/nilfs2/gcinode.c
index 08a07a2..57ceaf3 100644
--- a/fs/nilfs2/gcinode.c
+++ b/fs/nilfs2/gcinode.c
@@ -191,6 +191,8 @@
while (!list_empty(head)) {
ii = list_first_entry(head, struct nilfs_inode_info, i_dirty);
list_del_init(&ii->i_dirty);
+ truncate_inode_pages(&ii->vfs_inode.i_data, 0);
+ nilfs_btnode_cache_clear(&ii->i_btnode_cache);
iput(&ii->vfs_inode);
}
}
diff --git a/fs/nilfs2/namei.c b/fs/nilfs2/namei.c
index b728479..1d0c0b8 100644
--- a/fs/nilfs2/namei.c
+++ b/fs/nilfs2/namei.c
@@ -63,7 +63,7 @@
*/
static struct dentry *
-nilfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
+nilfs_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
{
struct inode *inode;
ino_t ino;
@@ -85,7 +85,7 @@
* with d_instantiate().
*/
static int nilfs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
struct inode *inode;
struct nilfs_transaction_info ti;
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index 0e72ad6..88e11fb 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -2309,6 +2309,8 @@
if (!test_bit(NILFS_I_UPDATED, &ii->i_state))
continue;
list_del_init(&ii->i_dirty);
+ truncate_inode_pages(&ii->vfs_inode.i_data, 0);
+ nilfs_btnode_cache_clear(&ii->i_btnode_cache);
iput(&ii->vfs_inode);
}
}
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 1099a76..d57c42f9 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -1288,7 +1288,8 @@
err = -EBUSY;
goto failed;
}
- s = sget(fs_type, nilfs_test_bdev_super, nilfs_set_bdev_super, sd.bdev);
+ s = sget(fs_type, nilfs_test_bdev_super, nilfs_set_bdev_super, flags,
+ sd.bdev);
mutex_unlock(&sd.bdev->bd_fsfreeze_mutex);
if (IS_ERR(s)) {
err = PTR_ERR(s);
@@ -1301,7 +1302,6 @@
s_new = true;
/* New superblock instance created */
- s->s_flags = flags;
s->s_mode = mode;
strlcpy(s->s_id, bdevname(sd.bdev, b), sizeof(s->s_id));
sb_set_blocksize(s, block_size(sd.bdev));
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 3568c8a..d438036 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -61,8 +61,6 @@
static int create_fd(struct fsnotify_group *group, struct fsnotify_event *event)
{
int client_fd;
- struct dentry *dentry;
- struct vfsmount *mnt;
struct file *new_file;
pr_debug("%s: group=%p event=%p\n", __func__, group, event);
@@ -81,12 +79,10 @@
* we need a new file handle for the userspace program so it can read even if it was
* originally opened O_WRONLY.
*/
- dentry = dget(event->path.dentry);
- mnt = mntget(event->path.mnt);
/* it's possible this event was an overflow event. in that case dentry and mnt
* are NULL; That's fine, just don't call dentry open */
- if (dentry && mnt)
- new_file = dentry_open(dentry, mnt,
+ if (event->path.dentry && event->path.mnt)
+ new_file = dentry_open(&event->path,
group->fanotify_data.f_flags | FMODE_NONOTIFY,
current_cred());
else
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index b39c5c1..6baadb5 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -52,6 +52,7 @@
void __fsnotify_update_child_dentry_flags(struct inode *inode)
{
struct dentry *alias;
+ struct hlist_node *p;
int watched;
if (!S_ISDIR(inode->i_mode))
@@ -63,7 +64,7 @@
spin_lock(&inode->i_lock);
/* run all of the dentries associated with this inode. Since this is a
* directory, there damn well better only be one item on this list */
- list_for_each_entry(alias, &inode->i_dentry, d_alias) {
+ hlist_for_each_entry(alias, p, &inode->i_dentry, d_alias) {
struct dentry *child;
/* run all of the children of the original inode and fix their
diff --git a/fs/ntfs/namei.c b/fs/ntfs/namei.c
index 358273e..436f360 100644
--- a/fs/ntfs/namei.c
+++ b/fs/ntfs/namei.c
@@ -101,7 +101,7 @@
* Locking: Caller must hold i_mutex on the directory.
*/
static struct dentry *ntfs_lookup(struct inode *dir_ino, struct dentry *dent,
- struct nameidata *nd)
+ unsigned int flags)
{
ntfs_volume *vol = NTFS_SB(dir_ino->i_sb);
struct inode *dent_inode;
diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c
index e5ba348..8db4b58 100644
--- a/fs/ocfs2/dcache.c
+++ b/fs/ocfs2/dcache.c
@@ -49,14 +49,13 @@
}
-static int ocfs2_dentry_revalidate(struct dentry *dentry,
- struct nameidata *nd)
+static int ocfs2_dentry_revalidate(struct dentry *dentry, unsigned int flags)
{
struct inode *inode;
int ret = 0; /* if all else fails, just return false */
struct ocfs2_super *osb;
- if (nd && nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
inode = dentry->d_inode;
@@ -170,13 +169,11 @@
u64 parent_blkno,
int skip_unhashed)
{
- struct list_head *p;
- struct dentry *dentry = NULL;
+ struct hlist_node *p;
+ struct dentry *dentry;
spin_lock(&inode->i_lock);
- list_for_each(p, &inode->i_dentry) {
- dentry = list_entry(p, struct dentry, d_alias);
-
+ hlist_for_each_entry(dentry, p, &inode->i_dentry, d_alias) {
spin_lock(&dentry->d_lock);
if (ocfs2_match_dentry(dentry, parent_blkno, skip_unhashed)) {
trace_ocfs2_find_local_alias(dentry->d_name.len,
@@ -184,16 +181,13 @@
dget_dlock(dentry);
spin_unlock(&dentry->d_lock);
- break;
+ spin_unlock(&inode->i_lock);
+ return dentry;
}
spin_unlock(&dentry->d_lock);
-
- dentry = NULL;
}
-
spin_unlock(&inode->i_lock);
-
- return dentry;
+ return NULL;
}
DEFINE_SPINLOCK(dentry_attach_lock);
diff --git a/fs/ocfs2/dlmfs/dlmfs.c b/fs/ocfs2/dlmfs/dlmfs.c
index e31d6ae..83b6f98 100644
--- a/fs/ocfs2/dlmfs/dlmfs.c
+++ b/fs/ocfs2/dlmfs/dlmfs.c
@@ -526,7 +526,7 @@
static int dlmfs_create(struct inode *dir,
struct dentry *dentry,
umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
int status = 0;
struct inode *inode;
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 81a4cd2..4f7795f 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -456,7 +456,7 @@
stats->ls_gets++;
stats->ls_total += ktime_to_ns(kt);
/* overflow */
- if (unlikely(stats->ls_gets) == 0) {
+ if (unlikely(stats->ls_gets == 0)) {
stats->ls_gets++;
stats->ls_total = ktime_to_ns(kt);
}
@@ -3932,6 +3932,8 @@
static void ocfs2_schedule_blocked_lock(struct ocfs2_super *osb,
struct ocfs2_lock_res *lockres)
{
+ unsigned long flags;
+
assert_spin_locked(&lockres->l_lock);
if (lockres->l_flags & OCFS2_LOCK_FREEING) {
@@ -3945,21 +3947,22 @@
lockres_or_flags(lockres, OCFS2_LOCK_QUEUED);
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
if (list_empty(&lockres->l_blocked_list)) {
list_add_tail(&lockres->l_blocked_list,
&osb->blocked_lock_list);
osb->blocked_lock_count++;
}
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
}
static void ocfs2_downconvert_thread_do_work(struct ocfs2_super *osb)
{
unsigned long processed;
+ unsigned long flags;
struct ocfs2_lock_res *lockres;
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
/* grab this early so we know to try again if a state change and
* wake happens part-way through our work */
osb->dc_work_sequence = osb->dc_wake_sequence;
@@ -3972,38 +3975,40 @@
struct ocfs2_lock_res, l_blocked_list);
list_del_init(&lockres->l_blocked_list);
osb->blocked_lock_count--;
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
BUG_ON(!processed);
processed--;
ocfs2_process_blocked_lock(osb, lockres);
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
}
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
}
static int ocfs2_downconvert_thread_lists_empty(struct ocfs2_super *osb)
{
int empty = 0;
+ unsigned long flags;
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
if (list_empty(&osb->blocked_lock_list))
empty = 1;
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
return empty;
}
static int ocfs2_downconvert_thread_should_wake(struct ocfs2_super *osb)
{
int should_wake = 0;
+ unsigned long flags;
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
if (osb->dc_work_sequence != osb->dc_wake_sequence)
should_wake = 1;
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
return should_wake;
}
@@ -4033,10 +4038,12 @@
void ocfs2_wake_downconvert_thread(struct ocfs2_super *osb)
{
- spin_lock(&osb->dc_task_lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
/* make sure the voting thread gets a swipe at whatever changes
* the caller may have made to the voting state */
osb->dc_wake_sequence++;
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
wake_up(&osb->dc_event);
}
diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c
index 2f5b92e..70b5863 100644
--- a/fs/ocfs2/extent_map.c
+++ b/fs/ocfs2/extent_map.c
@@ -923,8 +923,6 @@
ocfs2_inode_unlock(inode, 0);
out:
- if (ret && ret != -ENXIO)
- ret = -ENXIO;
return ret;
}
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 061591a..7602783 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1950,7 +1950,7 @@
if (ret < 0)
mlog_errno(ret);
- if (file->f_flags & O_SYNC)
+ if (file && (file->f_flags & O_SYNC))
handle->h_sync = 1;
ocfs2_commit_trans(osb, handle);
@@ -2422,8 +2422,10 @@
unaligned_dio = 0;
}
- if (unaligned_dio)
+ if (unaligned_dio) {
+ ocfs2_iocb_clear_unaligned_aio(iocb);
atomic_dec(&OCFS2_I(inode)->ip_unaligned_aio);
+ }
out:
if (rw_level != -1)
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index 9f39c64..f1fd074 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -98,7 +98,7 @@
#define OCFS2_ORPHAN_NAMELEN ((int)(2 * sizeof(u64)))
static struct dentry *ocfs2_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
int status;
u64 blkno;
@@ -618,7 +618,7 @@
static int ocfs2_create(struct inode *dir,
struct dentry *dentry,
umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
int ret;
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index 92fcd57..0a86e30 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -399,8 +399,6 @@
msecs_to_jiffies(oinfo->dqi_syncms));
out_err:
- if (status)
- mlog_errno(status);
return status;
out_unlock:
ocfs2_unlock_global_qf(oinfo, 0);
diff --git a/fs/omfs/dir.c b/fs/omfs/dir.c
index f00576e..fb5b3ff 100644
--- a/fs/omfs/dir.c
+++ b/fs/omfs/dir.c
@@ -285,13 +285,13 @@
}
static int omfs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
return omfs_add_node(dir, dentry, mode | S_IFREG);
}
static struct dentry *omfs_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct buffer_head *bh;
struct inode *inode = NULL;
diff --git a/fs/open.c b/fs/open.c
index d6c79a0..1e914b3 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -397,10 +397,10 @@
{
struct file *file;
struct inode *inode;
- int error;
+ int error, fput_needed;
error = -EBADF;
- file = fget(fd);
+ file = fget_raw_light(fd, &fput_needed);
if (!file)
goto out;
@@ -414,7 +414,7 @@
if (!error)
set_fs_pwd(current->fs, &file->f_path);
out_putf:
- fput(file);
+ fput_light(file, fput_needed);
out:
return error;
}
@@ -537,25 +537,6 @@
return error;
}
-SYSCALL_DEFINE3(chown, const char __user *, filename, uid_t, user, gid_t, group)
-{
- struct path path;
- int error;
-
- error = user_path(filename, &path);
- if (error)
- goto out;
- error = mnt_want_write(path.mnt);
- if (error)
- goto out_release;
- error = chown_common(&path, user, group);
- mnt_drop_write(path.mnt);
-out_release:
- path_put(&path);
-out:
- return error;
-}
-
SYSCALL_DEFINE5(fchownat, int, dfd, const char __user *, filename, uid_t, user,
gid_t, group, int, flag)
{
@@ -583,23 +564,15 @@
return error;
}
+SYSCALL_DEFINE3(chown, const char __user *, filename, uid_t, user, gid_t, group)
+{
+ return sys_fchownat(AT_FDCWD, filename, user, group, 0);
+}
+
SYSCALL_DEFINE3(lchown, const char __user *, filename, uid_t, user, gid_t, group)
{
- struct path path;
- int error;
-
- error = user_lpath(filename, &path);
- if (error)
- goto out;
- error = mnt_want_write(path.mnt);
- if (error)
- goto out_release;
- error = chown_common(&path, user, group);
- mnt_drop_write(path.mnt);
-out_release:
- path_put(&path);
-out:
- return error;
+ return sys_fchownat(AT_FDCWD, filename, user, group,
+ AT_SYMLINK_NOFOLLOW);
}
SYSCALL_DEFINE3(fchown, unsigned int, fd, uid_t, user, gid_t, group)
@@ -667,10 +640,9 @@
return 0;
}
-static struct file *do_dentry_open(struct dentry *dentry, struct vfsmount *mnt,
- struct file *f,
- int (*open)(struct inode *, struct file *),
- const struct cred *cred)
+static int do_dentry_open(struct file *f,
+ int (*open)(struct inode *, struct file *),
+ const struct cred *cred)
{
static const struct file_operations empty_fops = {};
struct inode *inode;
@@ -682,9 +654,9 @@
if (unlikely(f->f_flags & O_PATH))
f->f_mode = FMODE_PATH;
- inode = dentry->d_inode;
+ inode = f->f_path.dentry->d_inode;
if (f->f_mode & FMODE_WRITE) {
- error = __get_file_write_access(inode, mnt);
+ error = __get_file_write_access(inode, f->f_path.mnt);
if (error)
goto cleanup_file;
if (!special_file(inode->i_mode))
@@ -692,14 +664,12 @@
}
f->f_mapping = inode->i_mapping;
- f->f_path.dentry = dentry;
- f->f_path.mnt = mnt;
f->f_pos = 0;
file_sb_list_add(f, inode->i_sb);
if (unlikely(f->f_mode & FMODE_PATH)) {
f->f_op = &empty_fops;
- return f;
+ return 0;
}
f->f_op = fops_get(inode->i_fop);
@@ -726,10 +696,11 @@
file_ra_state_init(&f->f_ra, f->f_mapping->host->i_mapping);
- return f;
+ return 0;
cleanup_all:
fops_put(f->f_op);
+ file_sb_list_del(f);
if (f->f_mode & FMODE_WRITE) {
put_write_access(inode);
if (!special_file(inode->i_mode)) {
@@ -740,124 +711,62 @@
* here, so just reset the state.
*/
file_reset_write(f);
- mnt_drop_write(mnt);
+ mnt_drop_write(f->f_path.mnt);
}
}
- file_sb_list_del(f);
- f->f_path.dentry = NULL;
- f->f_path.mnt = NULL;
cleanup_file:
- dput(dentry);
- mntput(mnt);
- return ERR_PTR(error);
-}
-
-static struct file *__dentry_open(struct dentry *dentry, struct vfsmount *mnt,
- struct file *f,
- int (*open)(struct inode *, struct file *),
- const struct cred *cred)
-{
- struct file *res = do_dentry_open(dentry, mnt, f, open, cred);
- if (!IS_ERR(res)) {
- int error = open_check_o_direct(f);
- if (error) {
- fput(res);
- res = ERR_PTR(error);
- }
- } else {
- put_filp(f);
- }
- return res;
+ path_put(&f->f_path);
+ f->f_path.mnt = NULL;
+ f->f_path.dentry = NULL;
+ return error;
}
/**
- * lookup_instantiate_filp - instantiates the open intent filp
- * @nd: pointer to nameidata
+ * finish_open - finish opening a file
+ * @od: opaque open data
* @dentry: pointer to dentry
* @open: open callback
*
- * Helper for filesystems that want to use lookup open intents and pass back
- * a fully instantiated struct file to the caller.
- * This function is meant to be called from within a filesystem's
- * lookup method.
- * Beware of calling it for non-regular files! Those ->open methods might block
- * (e.g. in fifo_open), leaving you with parent locked (and in case of fifo,
- * leading to a deadlock, as nobody can open that fifo anymore, because
- * another process to open fifo will block on locked parent when doing lookup).
- * Note that in case of error, nd->intent.open.file is destroyed, but the
- * path information remains valid.
+ * This can be used to finish opening a file passed to i_op->atomic_open().
+ *
* If the open callback is set to NULL, then the standard f_op->open()
* filesystem callback is substituted.
*/
-struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry,
- int (*open)(struct inode *, struct file *))
+int finish_open(struct file *file, struct dentry *dentry,
+ int (*open)(struct inode *, struct file *),
+ int *opened)
{
- const struct cred *cred = current_cred();
+ int error;
+ BUG_ON(*opened & FILE_OPENED); /* once it's opened, it's opened */
- if (IS_ERR(nd->intent.open.file))
- goto out;
- if (IS_ERR(dentry))
- goto out_err;
- nd->intent.open.file = __dentry_open(dget(dentry), mntget(nd->path.mnt),
- nd->intent.open.file,
- open, cred);
-out:
- return nd->intent.open.file;
-out_err:
- release_open_intent(nd);
- nd->intent.open.file = ERR_CAST(dentry);
- goto out;
+ mntget(file->f_path.mnt);
+ file->f_path.dentry = dget(dentry);
+
+ error = do_dentry_open(file, open, current_cred());
+ if (!error)
+ *opened |= FILE_OPENED;
+
+ return error;
}
-EXPORT_SYMBOL_GPL(lookup_instantiate_filp);
+EXPORT_SYMBOL(finish_open);
/**
- * nameidata_to_filp - convert a nameidata to an open filp.
- * @nd: pointer to nameidata
- * @flags: open flags
+ * finish_no_open - finish ->atomic_open() without opening the file
*
- * Note that this function destroys the original nameidata
+ * @od: opaque open data
+ * @dentry: dentry or NULL (as returned from ->lookup())
+ *
+ * This can be used to set the result of a successful lookup in ->atomic_open().
+ * The filesystem's atomic_open() method shall return NULL after calling this.
*/
-struct file *nameidata_to_filp(struct nameidata *nd)
+int finish_no_open(struct file *file, struct dentry *dentry)
{
- const struct cred *cred = current_cred();
- struct file *filp;
-
- /* Pick up the filp from the open intent */
- filp = nd->intent.open.file;
-
- /* Has the filesystem initialised the file for us? */
- if (filp->f_path.dentry != NULL) {
- nd->intent.open.file = NULL;
- } else {
- struct file *res;
-
- path_get(&nd->path);
- res = do_dentry_open(nd->path.dentry, nd->path.mnt,
- filp, NULL, cred);
- if (!IS_ERR(res)) {
- int error;
-
- nd->intent.open.file = NULL;
- BUG_ON(res != filp);
-
- error = open_check_o_direct(filp);
- if (error) {
- fput(filp);
- filp = ERR_PTR(error);
- }
- } else {
- /* Allow nd->intent.open.file to be recycled */
- filp = res;
- }
- }
- return filp;
+ file->f_path.dentry = dentry;
+ return 1;
}
+EXPORT_SYMBOL(finish_no_open);
-/*
- * dentry_open() will have done dput(dentry) and mntput(mnt) if it returns an
- * error.
- */
-struct file *dentry_open(struct dentry *dentry, struct vfsmount *mnt, int flags,
+struct file *dentry_open(const struct path *path, int flags,
const struct cred *cred)
{
int error;
@@ -866,18 +775,28 @@
validate_creds(cred);
/* We must always pass in a valid mount pointer. */
- BUG_ON(!mnt);
+ BUG_ON(!path->mnt);
error = -ENFILE;
f = get_empty_filp();
- if (f == NULL) {
- dput(dentry);
- mntput(mnt);
+ if (f == NULL)
return ERR_PTR(error);
- }
f->f_flags = flags;
- return __dentry_open(dentry, mnt, f, NULL, cred);
+ f->f_path = *path;
+ path_get(&f->f_path);
+ error = do_dentry_open(f, NULL, cred);
+ if (!error) {
+ error = open_check_o_direct(f);
+ if (error) {
+ fput(f);
+ f = ERR_PTR(error);
+ }
+ } else {
+ put_filp(f);
+ f = ERR_PTR(error);
+ }
+ return f;
}
EXPORT_SYMBOL(dentry_open);
diff --git a/fs/openpromfs/inode.c b/fs/openpromfs/inode.c
index bc49c975d..4a34779 100644
--- a/fs/openpromfs/inode.c
+++ b/fs/openpromfs/inode.c
@@ -170,13 +170,13 @@
.llseek = generic_file_llseek,
};
-static struct dentry *openpromfs_lookup(struct inode *, struct dentry *, struct nameidata *);
+static struct dentry *openpromfs_lookup(struct inode *, struct dentry *, unsigned int);
static const struct inode_operations openprom_inode_operations = {
.lookup = openpromfs_lookup,
};
-static struct dentry *openpromfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
+static struct dentry *openpromfs_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
{
struct op_inode_info *ent_oi, *oi = OP_I(dir);
struct device_node *dp, *child;
diff --git a/fs/pnode.c b/fs/pnode.c
index bed378d..3e000a5 100644
--- a/fs/pnode.c
+++ b/fs/pnode.c
@@ -237,8 +237,9 @@
source = get_source(m, prev_dest_mnt, prev_src_mnt, &type);
- if (!(child = copy_tree(source, source->mnt.mnt_root, type))) {
- ret = -ENOMEM;
+ child = copy_tree(source, source->mnt.mnt_root, type);
+ if (IS_ERR(child)) {
+ ret = PTR_ERR(child);
list_splice(tree_list, tmp_list.prev);
goto out;
}
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 437195f..2772208 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1427,16 +1427,19 @@
static void *proc_pid_follow_link(struct dentry *dentry, struct nameidata *nd)
{
struct inode *inode = dentry->d_inode;
+ struct path path;
int error = -EACCES;
- /* We don't need a base pointer in the /proc filesystem */
- path_put(&nd->path);
-
/* Are we allowed to snoop on the tasks file descriptors? */
if (!proc_fd_access_allowed(inode))
goto out;
- error = PROC_I(inode)->op.proc_get_link(dentry, &nd->path);
+ error = PROC_I(inode)->op.proc_get_link(dentry, &path);
+ if (error)
+ goto out;
+
+ nd_jump_link(nd, &path);
+ return NULL;
out:
return ERR_PTR(error);
}
@@ -1601,13 +1604,13 @@
* made this apply to all per process world readable and executable
* directories.
*/
-int pid_revalidate(struct dentry *dentry, struct nameidata *nd)
+int pid_revalidate(struct dentry *dentry, unsigned int flags)
{
struct inode *inode;
struct task_struct *task;
const struct cred *cred;
- if (nd && nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
inode = dentry->d_inode;
@@ -1781,7 +1784,7 @@
return proc_fd_info(dentry->d_inode, path, NULL);
}
-static int tid_fd_revalidate(struct dentry *dentry, struct nameidata *nd)
+static int tid_fd_revalidate(struct dentry *dentry, unsigned int flags)
{
struct inode *inode;
struct task_struct *task;
@@ -1789,7 +1792,7 @@
struct files_struct *files;
const struct cred *cred;
- if (nd && nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
inode = dentry->d_inode;
@@ -1868,7 +1871,7 @@
d_set_d_op(dentry, &tid_fd_dentry_operations);
d_add(dentry, inode);
/* Close the race of the process dying before we return the dentry */
- if (tid_fd_revalidate(dentry, NULL))
+ if (tid_fd_revalidate(dentry, 0))
error = NULL;
out:
@@ -1956,7 +1959,7 @@
}
static struct dentry *proc_lookupfd(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
return proc_lookupfd_common(dir, dentry, proc_fd_instantiate);
}
@@ -2003,7 +2006,7 @@
return 0;
}
-static int map_files_d_revalidate(struct dentry *dentry, struct nameidata *nd)
+static int map_files_d_revalidate(struct dentry *dentry, unsigned int flags)
{
unsigned long vm_start, vm_end;
bool exact_vma_exists = false;
@@ -2013,7 +2016,7 @@
struct inode *inode;
int status = 0;
- if (nd && nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
if (!capable(CAP_SYS_ADMIN)) {
@@ -2145,7 +2148,7 @@
}
static struct dentry *proc_map_files_lookup(struct inode *dir,
- struct dentry *dentry, struct nameidata *nd)
+ struct dentry *dentry, unsigned int flags)
{
unsigned long vm_start, vm_end;
struct vm_area_struct *vma;
@@ -2371,7 +2374,7 @@
d_set_d_op(dentry, &tid_fd_dentry_operations);
d_add(dentry, inode);
/* Close the race of the process dying before we return the dentry */
- if (tid_fd_revalidate(dentry, NULL))
+ if (tid_fd_revalidate(dentry, 0))
error = NULL;
out:
@@ -2380,7 +2383,7 @@
static struct dentry *proc_lookupfdinfo(struct inode *dir,
struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
return proc_lookupfd_common(dir, dentry, proc_fdinfo_instantiate);
}
@@ -2430,7 +2433,7 @@
d_set_d_op(dentry, &pid_dentry_operations);
d_add(dentry, inode);
/* Close the race of the process dying before we return the dentry */
- if (pid_revalidate(dentry, NULL))
+ if (pid_revalidate(dentry, 0))
error = NULL;
out:
return error;
@@ -2630,7 +2633,7 @@
};
static struct dentry *proc_attr_dir_lookup(struct inode *dir,
- struct dentry *dentry, struct nameidata *nd)
+ struct dentry *dentry, unsigned int flags)
{
return proc_pident_lookup(dir, dentry,
attr_dir_stuff, ARRAY_SIZE(attr_dir_stuff));
@@ -3114,7 +3117,8 @@
.llseek = default_llseek,
};
-static struct dentry *proc_tgid_base_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd){
+static struct dentry *proc_tgid_base_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
+{
return proc_pident_lookup(dir, dentry,
tgid_base_stuff, ARRAY_SIZE(tgid_base_stuff));
}
@@ -3237,13 +3241,13 @@
d_add(dentry, inode);
/* Close the race of the process dying before we return the dentry */
- if (pid_revalidate(dentry, NULL))
+ if (pid_revalidate(dentry, 0))
error = NULL;
out:
return error;
}
-struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, struct nameidata *nd)
+struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, unsigned int flags)
{
struct dentry *result;
struct task_struct *task;
@@ -3470,7 +3474,8 @@
tid_base_stuff,ARRAY_SIZE(tid_base_stuff));
}
-static struct dentry *proc_tid_base_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd){
+static struct dentry *proc_tid_base_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
+{
return proc_pident_lookup(dir, dentry,
tid_base_stuff, ARRAY_SIZE(tid_base_stuff));
}
@@ -3508,13 +3513,13 @@
d_add(dentry, inode);
/* Close the race of the process dying before we return the dentry */
- if (pid_revalidate(dentry, NULL))
+ if (pid_revalidate(dentry, 0))
error = NULL;
out:
return error;
}
-static struct dentry *proc_task_lookup(struct inode *dir, struct dentry * dentry, struct nameidata *nd)
+static struct dentry *proc_task_lookup(struct inode *dir, struct dentry * dentry, unsigned int flags)
{
struct dentry *result = ERR_PTR(-ENOENT);
struct task_struct *task;
diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index 2edf34f..b3647fe 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -446,7 +446,7 @@
}
struct dentry *proc_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
return proc_lookup_de(PDE(dir), dir, dentry);
}
diff --git a/fs/proc/internal.h b/fs/proc/internal.h
index eca4aca..e1167a1 100644
--- a/fs/proc/internal.h
+++ b/fs/proc/internal.h
@@ -106,7 +106,7 @@
extern spinlock_t proc_subdir_lock;
-struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, struct nameidata *);
+struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, unsigned int);
int proc_pid_readdir(struct file * filp, void * dirent, filldir_t filldir);
unsigned long task_vsize(struct mm_struct *);
unsigned long task_statm(struct mm_struct *,
@@ -132,7 +132,7 @@
* of the /proc/<pid> subdirectories.
*/
int proc_readdir(struct file *, void *, filldir_t);
-struct dentry *proc_lookup(struct inode *, struct dentry *, struct nameidata *);
+struct dentry *proc_lookup(struct inode *, struct dentry *, unsigned int);
@@ -142,7 +142,7 @@
int proc_fill_cache(struct file *filp, void *dirent, filldir_t filldir,
const char *name, int len,
instantiate_t instantiate, struct task_struct *task, const void *ptr);
-int pid_revalidate(struct dentry *dentry, struct nameidata *nd);
+int pid_revalidate(struct dentry *dentry, unsigned int flags);
struct inode *proc_pid_make_inode(struct super_block * sb, struct task_struct *task);
extern const struct dentry_operations pid_dentry_operations;
int pid_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat);
diff --git a/fs/proc/namespaces.c b/fs/proc/namespaces.c
index 0d9e23a..b178ed7 100644
--- a/fs/proc/namespaces.c
+++ b/fs/proc/namespaces.c
@@ -56,7 +56,7 @@
d_set_d_op(dentry, &pid_dentry_operations);
d_add(dentry, inode);
/* Close the race of the process dying before we return the dentry */
- if (pid_revalidate(dentry, NULL))
+ if (pid_revalidate(dentry, 0))
error = NULL;
out:
return error;
@@ -140,7 +140,7 @@
};
static struct dentry *proc_ns_dir_lookup(struct inode *dir,
- struct dentry *dentry, struct nameidata *nd)
+ struct dentry *dentry, unsigned int flags)
{
struct dentry *error;
struct task_struct *task = get_proc_task(dir);
diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
index 927cbd1..df7dd08 100644
--- a/fs/proc/proc_devtree.c
+++ b/fs/proc/proc_devtree.c
@@ -101,6 +101,11 @@
{
struct proc_dir_entry *ent;
+ if (!oldprop) {
+ proc_device_tree_add_prop(pde, newprop);
+ return;
+ }
+
for (ent = pde->subdir; ent != NULL; ent = ent->next)
if (ent->data == oldprop)
break;
diff --git a/fs/proc/proc_net.c b/fs/proc/proc_net.c
index 06e1cc1..fe72cd0 100644
--- a/fs/proc/proc_net.c
+++ b/fs/proc/proc_net.c
@@ -119,7 +119,7 @@
}
static struct dentry *proc_tgid_net_lookup(struct inode *dir,
- struct dentry *dentry, struct nameidata *nd)
+ struct dentry *dentry, unsigned int flags)
{
struct dentry *de;
struct net *net;
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index 3476bca..dfafeb2 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -433,7 +433,7 @@
}
static struct dentry *proc_sys_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct ctl_table_header *head = grab_header(dir);
struct ctl_table_header *h = NULL;
@@ -794,9 +794,9 @@
.getattr = proc_sys_getattr,
};
-static int proc_sys_revalidate(struct dentry *dentry, struct nameidata *nd)
+static int proc_sys_revalidate(struct dentry *dentry, unsigned int flags)
{
- if (nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
return !PROC_I(dentry->d_inode)->sysctl->unregistering;
}
diff --git a/fs/proc/root.c b/fs/proc/root.c
index 7c30fce..9a2d9fd 100644
--- a/fs/proc/root.c
+++ b/fs/proc/root.c
@@ -111,7 +111,7 @@
options = data;
}
- sb = sget(fs_type, proc_test_super, proc_set_super, ns);
+ sb = sget(fs_type, proc_test_super, proc_set_super, flags, ns);
if (IS_ERR(sb))
return ERR_CAST(sb);
@@ -121,7 +121,6 @@
}
if (!sb->s_root) {
- sb->s_flags = flags;
err = proc_fill_super(sb);
if (err) {
deactivate_locked_super(sb);
@@ -200,13 +199,12 @@
return 0;
}
-static struct dentry *proc_root_lookup(struct inode * dir, struct dentry * dentry, struct nameidata *nd)
+static struct dentry *proc_root_lookup(struct inode * dir, struct dentry * dentry, unsigned int flags)
{
- if (!proc_lookup(dir, dentry, nd)) {
+ if (!proc_lookup(dir, dentry, flags))
return NULL;
- }
- return proc_pid_lookup(dir, dentry, nd);
+ return proc_pid_lookup(dir, dentry, flags);
}
static int proc_root_readdir(struct file * filp,
diff --git a/fs/proc_namespace.c b/fs/proc_namespace.c
index 5e289a7..5fe34c3 100644
--- a/fs/proc_namespace.c
+++ b/fs/proc_namespace.c
@@ -17,7 +17,7 @@
static unsigned mounts_poll(struct file *file, poll_table *wait)
{
- struct proc_mounts *p = file->private_data;
+ struct proc_mounts *p = proc_mounts(file->private_data);
struct mnt_namespace *ns = p->ns;
unsigned res = POLLIN | POLLRDNORM;
@@ -121,7 +121,7 @@
static int show_mountinfo(struct seq_file *m, struct vfsmount *mnt)
{
- struct proc_mounts *p = m->private;
+ struct proc_mounts *p = proc_mounts(m);
struct mount *r = real_mount(mnt);
struct super_block *sb = mnt->mnt_sb;
struct path mnt_path = { .dentry = mnt->mnt_root, .mnt = mnt };
@@ -268,7 +268,6 @@
if (ret)
goto err_free;
- p->m.private = p;
p->ns = ns;
p->root = root;
p->m.poll_event = ns->event;
@@ -288,7 +287,7 @@
static int mounts_release(struct inode *inode, struct file *file)
{
- struct proc_mounts *p = file->private_data;
+ struct proc_mounts *p = proc_mounts(file->private_data);
path_put(&p->root);
put_mnt_ns(p->ns);
return seq_release(inode, file);
diff --git a/fs/pstore/inode.c b/fs/pstore/inode.c
index aeb19e6..11a2aa2 100644
--- a/fs/pstore/inode.c
+++ b/fs/pstore/inode.c
@@ -258,7 +258,7 @@
return rc;
}
-int pstore_fill_super(struct super_block *sb, void *data, int silent)
+static int pstore_fill_super(struct super_block *sb, void *data, int silent)
{
struct inode *inode;
diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c
index 82c585f..03ce7a9 100644
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -94,20 +94,15 @@
* as we can from the end of the buffer.
*/
static void pstore_dump(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *s1, unsigned long l1,
- const char *s2, unsigned long l2)
+ enum kmsg_dump_reason reason)
{
- unsigned long s1_start, s2_start;
- unsigned long l1_cpy, l2_cpy;
- unsigned long size, total = 0;
- char *dst;
+ unsigned long total = 0;
const char *why;
u64 id;
- int hsize, ret;
unsigned int part = 1;
unsigned long flags = 0;
int is_locked = 0;
+ int ret;
why = get_reason_str(reason);
@@ -119,30 +114,25 @@
spin_lock_irqsave(&psinfo->buf_lock, flags);
oopscount++;
while (total < kmsg_bytes) {
+ char *dst;
+ unsigned long size;
+ int hsize;
+ size_t len;
+
dst = psinfo->buf;
hsize = sprintf(dst, "%s#%d Part%d\n", why, oopscount, part);
size = psinfo->bufsize - hsize;
dst += hsize;
- l2_cpy = min(l2, size);
- l1_cpy = min(l1, size - l2_cpy);
-
- if (l1_cpy + l2_cpy == 0)
+ if (!kmsg_dump_get_buffer(dumper, true, dst, size, &len))
break;
- s2_start = l2 - l2_cpy;
- s1_start = l1 - l1_cpy;
-
- memcpy(dst, s1 + s1_start, l1_cpy);
- memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
-
ret = psinfo->write(PSTORE_TYPE_DMESG, reason, &id, part,
- hsize + l1_cpy + l2_cpy, psinfo);
+ hsize + len, psinfo);
if (ret == 0 && reason == KMSG_DUMP_OOPS && pstore_is_mounted())
pstore_new_entry = 1;
- l1 -= l1_cpy;
- l2 -= l2_cpy;
- total += l1_cpy + l2_cpy;
+
+ total += hsize + len;
part++;
}
if (in_nmi()) {
diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c
index 9123cce..453030f 100644
--- a/fs/pstore/ram.c
+++ b/fs/pstore/ram.c
@@ -106,6 +106,8 @@
time->tv_sec = 0;
time->tv_nsec = 0;
+ /* Update old/shadowed buffer. */
+ persistent_ram_save_old(prz);
size = persistent_ram_old_size(prz);
*buf = kmalloc(size, GFP_KERNEL);
if (*buf == NULL)
@@ -184,6 +186,7 @@
return -EINVAL;
persistent_ram_free_old(cxt->przs[id]);
+ persistent_ram_zap(cxt->przs[id]);
return 0;
}
diff --git a/fs/pstore/ram_core.c b/fs/pstore/ram_core.c
index 31f8d18..c5fbdbb 100644
--- a/fs/pstore/ram_core.c
+++ b/fs/pstore/ram_core.c
@@ -250,23 +250,24 @@
persistent_ram_update_ecc(prz, start, count);
}
-static void __init
-persistent_ram_save_old(struct persistent_ram_zone *prz)
+void persistent_ram_save_old(struct persistent_ram_zone *prz)
{
struct persistent_ram_buffer *buffer = prz->buffer;
size_t size = buffer_size(prz);
size_t start = buffer_start(prz);
- char *dest;
- persistent_ram_ecc_old(prz);
+ if (!size)
+ return;
- dest = kmalloc(size, GFP_KERNEL);
- if (dest == NULL) {
+ if (!prz->old_log) {
+ persistent_ram_ecc_old(prz);
+ prz->old_log = kmalloc(size, GFP_KERNEL);
+ }
+ if (!prz->old_log) {
pr_err("persistent_ram: failed to allocate buffer\n");
return;
}
- prz->old_log = dest;
prz->old_log_size = size;
memcpy(prz->old_log, &buffer->data[start], size - start);
memcpy(prz->old_log + size - start, &buffer->data[0], start);
@@ -319,6 +320,13 @@
prz->old_log_size = 0;
}
+void persistent_ram_zap(struct persistent_ram_zone *prz)
+{
+ atomic_set(&prz->buffer->start, 0);
+ atomic_set(&prz->buffer->size, 0);
+ persistent_ram_update_header_ecc(prz);
+}
+
static void *persistent_ram_vmap(phys_addr_t start, size_t size)
{
struct page **pages;
@@ -405,6 +413,7 @@
" size %zu, start %zu\n",
buffer_size(prz), buffer_start(prz));
persistent_ram_save_old(prz);
+ return 0;
}
} else {
pr_info("persistent_ram: no valid data in buffer"
@@ -412,8 +421,7 @@
}
prz->buffer->sig = PERSISTENT_RAM_SIG;
- atomic_set(&prz->buffer->start, 0);
- atomic_set(&prz->buffer->size, 0);
+ persistent_ram_zap(prz);
return 0;
}
@@ -448,7 +456,6 @@
goto err;
persistent_ram_post_init(prz, ecc);
- persistent_ram_update_header_ecc(prz);
return prz;
err:
diff --git a/fs/qnx4/namei.c b/fs/qnx4/namei.c
index a512c0b..d024505 100644
--- a/fs/qnx4/namei.c
+++ b/fs/qnx4/namei.c
@@ -95,7 +95,7 @@
return NULL;
}
-struct dentry * qnx4_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
+struct dentry * qnx4_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
{
int ino;
struct qnx4_inode_entry *de;
diff --git a/fs/qnx4/qnx4.h b/fs/qnx4/qnx4.h
index 244d462..34e2d32 100644
--- a/fs/qnx4/qnx4.h
+++ b/fs/qnx4/qnx4.h
@@ -23,7 +23,7 @@
};
extern struct inode *qnx4_iget(struct super_block *, unsigned long);
-extern struct dentry *qnx4_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd);
+extern struct dentry *qnx4_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags);
extern unsigned long qnx4_count_free_blocks(struct super_block *sb);
extern unsigned long qnx4_block_map(struct inode *inode, long iblock);
diff --git a/fs/qnx6/inode.c b/fs/qnx6/inode.c
index e44012d..2049c81 100644
--- a/fs/qnx6/inode.c
+++ b/fs/qnx6/inode.c
@@ -622,7 +622,6 @@
static void qnx6_i_callback(struct rcu_head *head)
{
struct inode *inode = container_of(head, struct inode, i_rcu);
- INIT_LIST_HEAD(&inode->i_dentry);
kmem_cache_free(qnx6_inode_cachep, QNX6_I(inode));
}
diff --git a/fs/qnx6/namei.c b/fs/qnx6/namei.c
index 8a97289..0561326 100644
--- a/fs/qnx6/namei.c
+++ b/fs/qnx6/namei.c
@@ -13,7 +13,7 @@
#include "qnx6.h"
struct dentry *qnx6_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
unsigned ino;
struct page *page;
diff --git a/fs/qnx6/qnx6.h b/fs/qnx6/qnx6.h
index 6c5e02a..b00fcc9 100644
--- a/fs/qnx6/qnx6.h
+++ b/fs/qnx6/qnx6.h
@@ -45,7 +45,7 @@
extern struct inode *qnx6_iget(struct super_block *sb, unsigned ino);
extern struct dentry *qnx6_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd);
+ unsigned int flags);
#ifdef CONFIG_QNX6FS_DEBUG
extern void qnx6_superblock_debug(struct qnx6_super_block *,
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 10cbe84..d679fc4 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -595,12 +595,14 @@
}
EXPORT_SYMBOL(dquot_scan_active);
-int dquot_quota_sync(struct super_block *sb, int type, int wait)
+/* Write all dquot structures to quota files */
+int dquot_writeback_dquots(struct super_block *sb, int type)
{
struct list_head *dirty;
struct dquot *dquot;
struct quota_info *dqopt = sb_dqopt(sb);
int cnt;
+ int err, ret = 0;
mutex_lock(&dqopt->dqonoff_mutex);
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
@@ -624,7 +626,9 @@
atomic_inc(&dquot->dq_count);
spin_unlock(&dq_list_lock);
dqstats_inc(DQST_LOOKUPS);
- sb->dq_op->write_dquot(dquot);
+ err = sb->dq_op->write_dquot(dquot);
+ if (!ret && err)
+ err = ret;
dqput(dquot);
spin_lock(&dq_list_lock);
}
@@ -638,7 +642,21 @@
dqstats_inc(DQST_SYNCS);
mutex_unlock(&dqopt->dqonoff_mutex);
- if (!wait || (dqopt->flags & DQUOT_QUOTA_SYS_FILE))
+ return ret;
+}
+EXPORT_SYMBOL(dquot_writeback_dquots);
+
+/* Write all dquot structures to disk and make them visible from userspace */
+int dquot_quota_sync(struct super_block *sb, int type)
+{
+ struct quota_info *dqopt = sb_dqopt(sb);
+ int cnt;
+ int ret;
+
+ ret = dquot_writeback_dquots(sb, type);
+ if (ret)
+ return ret;
+ if (dqopt->flags & DQUOT_QUOTA_SYS_FILE)
return 0;
/* This is not very clever (and fast) but currently I don't know about
diff --git a/fs/quota/quota.c b/fs/quota/quota.c
index 9a39120..c659f92 100644
--- a/fs/quota/quota.c
+++ b/fs/quota/quota.c
@@ -47,7 +47,7 @@
static void quota_sync_one(struct super_block *sb, void *arg)
{
if (sb->s_qcop && sb->s_qcop->quota_sync)
- sb->s_qcop->quota_sync(sb, *(int *)arg, 1);
+ sb->s_qcop->quota_sync(sb, *(int *)arg);
}
static int quota_sync_all(int type)
@@ -270,7 +270,7 @@
case Q_SYNC:
if (!sb->s_qcop->quota_sync)
return -ENOSYS;
- return sb->s_qcop->quota_sync(sb, type, 1);
+ return sb->s_qcop->quota_sync(sb, type);
case Q_XQUOTAON:
case Q_XQUOTAOFF:
case Q_XQUOTARM:
diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index fbb0b47..d5378d0 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -110,6 +110,7 @@
/* prevent the page from being discarded on memory pressure */
SetPageDirty(page);
+ SetPageUptodate(page);
unlock_page(page);
put_page(page);
diff --git a/fs/ramfs/inode.c b/fs/ramfs/inode.c
index a1fdabe..eab8c09 100644
--- a/fs/ramfs/inode.c
+++ b/fs/ramfs/inode.c
@@ -114,7 +114,7 @@
return retval;
}
-static int ramfs_create(struct inode *dir, struct dentry *dentry, umode_t mode, struct nameidata *nd)
+static int ramfs_create(struct inode *dir, struct dentry *dentry, umode_t mode, bool excl)
{
return ramfs_mknod(dir, dentry, mode | S_IFREG, 0);
}
diff --git a/fs/read_write.c b/fs/read_write.c
index c20614f..1adfb69 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -55,10 +55,11 @@
* @file: file structure to seek on
* @offset: file offset to seek to
* @origin: type of seek
- * @size: max size of file system
+ * @size: max size of this file in file system
+ * @eof: offset used for SEEK_END position
*
* This is a variant of generic_file_llseek that allows passing in a custom
- * file size.
+ * maximum file size and a custom EOF position, for e.g. hashed directories
*
* Synchronization:
* SEEK_SET and SEEK_END are unsynchronized (but atomic on 64bit platforms)
@@ -67,13 +68,13 @@
*/
loff_t
generic_file_llseek_size(struct file *file, loff_t offset, int origin,
- loff_t maxsize)
+ loff_t maxsize, loff_t eof)
{
struct inode *inode = file->f_mapping->host;
switch (origin) {
case SEEK_END:
- offset += i_size_read(inode);
+ offset += eof;
break;
case SEEK_CUR:
/*
@@ -99,7 +100,7 @@
* In the generic case the entire file is data, so as long as
* offset isn't at the end of the file then the offset is data.
*/
- if (offset >= i_size_read(inode))
+ if (offset >= eof)
return -ENXIO;
break;
case SEEK_HOLE:
@@ -107,9 +108,9 @@
* There is a virtual hole at the end of the file, so as long as
* offset isn't i_size or larger, return i_size.
*/
- if (offset >= i_size_read(inode))
+ if (offset >= eof)
return -ENXIO;
- offset = i_size_read(inode);
+ offset = eof;
break;
}
@@ -132,7 +133,8 @@
struct inode *inode = file->f_mapping->host;
return generic_file_llseek_size(file, offset, origin,
- inode->i_sb->s_maxbytes);
+ inode->i_sb->s_maxbytes,
+ i_size_read(inode));
}
EXPORT_SYMBOL(generic_file_llseek);
diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c
index 84e8a69..8567fb8 100644
--- a/fs/reiserfs/namei.c
+++ b/fs/reiserfs/namei.c
@@ -322,7 +322,7 @@
}
static struct dentry *reiserfs_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
int retval;
int lock_depth;
@@ -573,7 +573,7 @@
}
static int reiserfs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
int retval;
struct inode *inode;
@@ -634,8 +634,8 @@
reiserfs_update_inode_transaction(inode);
reiserfs_update_inode_transaction(dir);
- d_instantiate(dentry, inode);
unlock_new_inode(inode);
+ d_instantiate(dentry, inode);
retval = journal_end(&th, dir->i_sb, jbegin_count);
out_failed:
@@ -712,8 +712,8 @@
goto out_failed;
}
- d_instantiate(dentry, inode);
unlock_new_inode(inode);
+ d_instantiate(dentry, inode);
retval = journal_end(&th, dir->i_sb, jbegin_count);
out_failed:
@@ -800,8 +800,8 @@
// the above add_entry did not update dir's stat data
reiserfs_update_sd(&th, dir);
- d_instantiate(dentry, inode);
unlock_new_inode(inode);
+ d_instantiate(dentry, inode);
retval = journal_end(&th, dir->i_sb, jbegin_count);
out_failed:
reiserfs_write_unlock_once(dir->i_sb, lock_depth);
@@ -1096,8 +1096,8 @@
goto out_failed;
}
- d_instantiate(dentry, inode);
unlock_new_inode(inode);
+ d_instantiate(dentry, inode);
retval = journal_end(&th, parent_dir->i_sb, jbegin_count);
out_failed:
reiserfs_write_unlock(parent_dir->i_sb);
diff --git a/fs/reiserfs/procfs.c b/fs/reiserfs/procfs.c
index 2c1ade6..e60e870 100644
--- a/fs/reiserfs/procfs.c
+++ b/fs/reiserfs/procfs.c
@@ -403,7 +403,7 @@
if (l)
return NULL;
- if (IS_ERR(sget(&reiserfs_fs_type, test_sb, set_sb, s)))
+ if (IS_ERR(sget(&reiserfs_fs_type, test_sb, set_sb, 0, s)))
return NULL;
up_write(&s->s_umount);
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 651ce76..7a37dab 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -68,6 +68,11 @@
{
struct reiserfs_transaction_handle th;
+ /*
+ * Writeback quota in non-journalled quota case - journalled quota has
+ * no dirty dquots
+ */
+ dquot_writeback_dquots(s, -1);
reiserfs_write_lock(s);
if (!journal_begin(&th, s, 1))
if (!journal_end_sync(&th, s, 1))
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 46fc1c2..d319963 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -62,7 +62,7 @@
static int xattr_create(struct inode *dir, struct dentry *dentry, int mode)
{
BUG_ON(!mutex_is_locked(&dir->i_mutex));
- return dir->i_op->create(dir, dentry, mode, NULL);
+ return dir->i_op->create(dir, dentry, mode, true);
}
#endif
@@ -942,7 +942,7 @@
return generic_permission(inode, mask);
}
-static int xattr_hide_revalidate(struct dentry *dentry, struct nameidata *nd)
+static int xattr_hide_revalidate(struct dentry *dentry, unsigned int flags)
{
return -EPERM;
}
diff --git a/fs/romfs/super.c b/fs/romfs/super.c
index e64f6b5..77c5f21 100644
--- a/fs/romfs/super.c
+++ b/fs/romfs/super.c
@@ -210,7 +210,7 @@
* look up an entry in a directory
*/
static struct dentry *romfs_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
unsigned long offset, maxoff;
struct inode *inode;
diff --git a/fs/splice.c b/fs/splice.c
index c9f1318..7bf08fa 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -273,13 +273,16 @@
* Check if we need to grow the arrays holding pages and partial page
* descriptions.
*/
-int splice_grow_spd(struct pipe_inode_info *pipe, struct splice_pipe_desc *spd)
+int splice_grow_spd(const struct pipe_inode_info *pipe, struct splice_pipe_desc *spd)
{
- if (pipe->buffers <= PIPE_DEF_BUFFERS)
+ unsigned int buffers = ACCESS_ONCE(pipe->buffers);
+
+ spd->nr_pages_max = buffers;
+ if (buffers <= PIPE_DEF_BUFFERS)
return 0;
- spd->pages = kmalloc(pipe->buffers * sizeof(struct page *), GFP_KERNEL);
- spd->partial = kmalloc(pipe->buffers * sizeof(struct partial_page), GFP_KERNEL);
+ spd->pages = kmalloc(buffers * sizeof(struct page *), GFP_KERNEL);
+ spd->partial = kmalloc(buffers * sizeof(struct partial_page), GFP_KERNEL);
if (spd->pages && spd->partial)
return 0;
@@ -289,10 +292,9 @@
return -ENOMEM;
}
-void splice_shrink_spd(struct pipe_inode_info *pipe,
- struct splice_pipe_desc *spd)
+void splice_shrink_spd(struct splice_pipe_desc *spd)
{
- if (pipe->buffers <= PIPE_DEF_BUFFERS)
+ if (spd->nr_pages_max <= PIPE_DEF_BUFFERS)
return;
kfree(spd->pages);
@@ -315,6 +317,7 @@
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &page_cache_pipe_buf_ops,
.spd_release = spd_release_page,
@@ -326,7 +329,7 @@
index = *ppos >> PAGE_CACHE_SHIFT;
loff = *ppos & ~PAGE_CACHE_MASK;
req_pages = (len + loff + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- nr_pages = min(req_pages, pipe->buffers);
+ nr_pages = min(req_pages, spd.nr_pages_max);
/*
* Lookup the (hopefully) full range of pages we need.
@@ -497,7 +500,7 @@
if (spd.nr_pages)
error = splice_to_pipe(pipe, &spd);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
return error;
}
@@ -598,6 +601,7 @@
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &default_pipe_buf_ops,
.spd_release = spd_release_page,
@@ -608,8 +612,8 @@
res = -ENOMEM;
vec = __vec;
- if (pipe->buffers > PIPE_DEF_BUFFERS) {
- vec = kmalloc(pipe->buffers * sizeof(struct iovec), GFP_KERNEL);
+ if (spd.nr_pages_max > PIPE_DEF_BUFFERS) {
+ vec = kmalloc(spd.nr_pages_max * sizeof(struct iovec), GFP_KERNEL);
if (!vec)
goto shrink_ret;
}
@@ -617,7 +621,7 @@
offset = *ppos & ~PAGE_CACHE_MASK;
nr_pages = (len + offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- for (i = 0; i < nr_pages && i < pipe->buffers && len; i++) {
+ for (i = 0; i < nr_pages && i < spd.nr_pages_max && len; i++) {
struct page *page;
page = alloc_page(GFP_USER);
@@ -665,7 +669,7 @@
shrink_ret:
if (vec != __vec)
kfree(vec);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
return res;
err:
@@ -1614,6 +1618,7 @@
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &user_page_pipe_buf_ops,
.spd_release = spd_release_page,
@@ -1629,13 +1634,13 @@
spd.nr_pages = get_iovec_page_array(iov, nr_segs, spd.pages,
spd.partial, false,
- pipe->buffers);
+ spd.nr_pages_max);
if (spd.nr_pages <= 0)
ret = spd.nr_pages;
else
ret = splice_to_pipe(pipe, &spd);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
return ret;
}
diff --git a/fs/squashfs/namei.c b/fs/squashfs/namei.c
index abcc58f..7834a51 100644
--- a/fs/squashfs/namei.c
+++ b/fs/squashfs/namei.c
@@ -134,7 +134,7 @@
static struct dentry *squashfs_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
const unsigned char *name = dentry->d_name.name;
int len = dentry->d_name.len;
diff --git a/fs/super.c b/fs/super.c
index cf00177..c743fb3 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -105,11 +105,12 @@
/**
* alloc_super - create new superblock
* @type: filesystem type superblock should belong to
+ * @flags: the mount flags
*
* Allocates and initializes a new &struct super_block. alloc_super()
* returns a pointer new superblock or %NULL if allocation had failed.
*/
-static struct super_block *alloc_super(struct file_system_type *type)
+static struct super_block *alloc_super(struct file_system_type *type, int flags)
{
struct super_block *s = kzalloc(sizeof(struct super_block), GFP_USER);
static const struct super_operations default_op;
@@ -136,6 +137,7 @@
#else
INIT_LIST_HEAD(&s->s_files);
#endif
+ s->s_flags = flags;
s->s_bdi = &default_backing_dev_info;
INIT_HLIST_NODE(&s->s_instances);
INIT_HLIST_BL_HEAD(&s->s_anon);
@@ -415,11 +417,13 @@
* @type: filesystem type superblock should belong to
* @test: comparison callback
* @set: setup callback
+ * @flags: mount flags
* @data: argument to each of them
*/
struct super_block *sget(struct file_system_type *type,
int (*test)(struct super_block *,void *),
int (*set)(struct super_block *,void *),
+ int flags,
void *data)
{
struct super_block *s = NULL;
@@ -450,7 +454,7 @@
}
if (!s) {
spin_unlock(&sb_lock);
- s = alloc_super(type);
+ s = alloc_super(type, flags);
if (!s)
return ERR_PTR(-ENOMEM);
goto retry;
@@ -925,13 +929,12 @@
{
struct super_block *sb;
- sb = sget(fs_type, ns_test_super, ns_set_super, data);
+ sb = sget(fs_type, ns_test_super, ns_set_super, flags, data);
if (IS_ERR(sb))
return ERR_CAST(sb);
if (!sb->s_root) {
int err;
- sb->s_flags = flags;
err = fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
if (err) {
deactivate_locked_super(sb);
@@ -992,7 +995,8 @@
error = -EBUSY;
goto error_bdev;
}
- s = sget(fs_type, test_bdev_super, set_bdev_super, bdev);
+ s = sget(fs_type, test_bdev_super, set_bdev_super, flags | MS_NOSEC,
+ bdev);
mutex_unlock(&bdev->bd_fsfreeze_mutex);
if (IS_ERR(s))
goto error_s;
@@ -1017,7 +1021,6 @@
} else {
char b[BDEVNAME_SIZE];
- s->s_flags = flags | MS_NOSEC;
s->s_mode = mode;
strlcpy(s->s_id, bdevname(bdev, b), sizeof(s->s_id));
sb_set_blocksize(s, block_size(bdev));
@@ -1062,13 +1065,11 @@
int (*fill_super)(struct super_block *, void *, int))
{
int error;
- struct super_block *s = sget(fs_type, NULL, set_anon_super, NULL);
+ struct super_block *s = sget(fs_type, NULL, set_anon_super, flags, NULL);
if (IS_ERR(s))
return ERR_CAST(s);
- s->s_flags = flags;
-
error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
if (error) {
deactivate_locked_super(s);
@@ -1091,11 +1092,10 @@
struct super_block *s;
int error;
- s = sget(fs_type, compare_single, set_anon_super, NULL);
+ s = sget(fs_type, compare_single, set_anon_super, flags, NULL);
if (IS_ERR(s))
return ERR_CAST(s);
if (!s->s_root) {
- s->s_flags = flags;
error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
if (error) {
deactivate_locked_super(s);
diff --git a/fs/sync.c b/fs/sync.c
index 11e3d1c..eb8722d 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -29,16 +29,6 @@
*/
static int __sync_filesystem(struct super_block *sb, int wait)
{
- /*
- * This should be safe, as we require bdi backing to actually
- * write out data in the first place
- */
- if (sb->s_bdi == &noop_backing_dev_info)
- return 0;
-
- if (sb->s_qcop && sb->s_qcop->quota_sync)
- sb->s_qcop->quota_sync(sb, -1, wait);
-
if (wait)
sync_inodes_sb(sb);
else
@@ -77,29 +67,48 @@
}
EXPORT_SYMBOL_GPL(sync_filesystem);
-static void sync_one_sb(struct super_block *sb, void *arg)
+static void sync_inodes_one_sb(struct super_block *sb, void *arg)
{
if (!(sb->s_flags & MS_RDONLY))
- __sync_filesystem(sb, *(int *)arg);
+ sync_inodes_sb(sb);
}
-/*
- * Sync all the data for all the filesystems (called by sys_sync() and
- * emergency sync)
- */
-static void sync_filesystems(int wait)
+
+static void sync_fs_one_sb(struct super_block *sb, void *arg)
{
- iterate_supers(sync_one_sb, &wait);
+ if (!(sb->s_flags & MS_RDONLY) && sb->s_op->sync_fs)
+ sb->s_op->sync_fs(sb, *(int *)arg);
+}
+
+static void fdatawrite_one_bdev(struct block_device *bdev, void *arg)
+{
+ filemap_fdatawrite(bdev->bd_inode->i_mapping);
+}
+
+static void fdatawait_one_bdev(struct block_device *bdev, void *arg)
+{
+ filemap_fdatawait(bdev->bd_inode->i_mapping);
}
/*
- * sync everything. Start out by waking pdflush, because that writes back
- * all queues in parallel.
+ * Sync everything. We start by waking flusher threads so that most of
+ * writeback runs on all devices in parallel. Then we sync all inodes reliably
+ * which effectively also waits for all flusher threads to finish doing
+ * writeback. At this point all data is on disk so metadata should be stable
+ * and we tell filesystems to sync their metadata via ->sync_fs() calls.
+ * Finally, we writeout all block devices because some filesystems (e.g. ext2)
+ * just write metadata (such as inodes or bitmaps) to block device page cache
+ * and do not sync it on their own in ->sync_fs().
*/
SYSCALL_DEFINE0(sync)
{
+ int nowait = 0, wait = 1;
+
wakeup_flusher_threads(0, WB_REASON_SYNC);
- sync_filesystems(0);
- sync_filesystems(1);
+ iterate_supers(sync_inodes_one_sb, NULL);
+ iterate_supers(sync_fs_one_sb, &nowait);
+ iterate_supers(sync_fs_one_sb, &wait);
+ iterate_bdevs(fdatawrite_one_bdev, NULL);
+ iterate_bdevs(fdatawait_one_bdev, NULL);
if (unlikely(laptop_mode))
laptop_sync_completion();
return 0;
@@ -107,12 +116,18 @@
static void do_sync_work(struct work_struct *work)
{
+ int nowait = 0;
+
/*
* Sync twice to reduce the possibility we skipped some inodes / pages
* because they were temporarily locked
*/
- sync_filesystems(0);
- sync_filesystems(0);
+ iterate_supers(sync_inodes_one_sb, &nowait);
+ iterate_supers(sync_fs_one_sb, &nowait);
+ iterate_bdevs(fdatawrite_one_bdev, NULL);
+ iterate_supers(sync_inodes_one_sb, &nowait);
+ iterate_supers(sync_fs_one_sb, &nowait);
+ iterate_bdevs(fdatawrite_one_bdev, NULL);
printk("Emergency Sync complete\n");
kfree(work);
}
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index e6bb9b2..a5cf784 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -300,15 +300,15 @@
static int sysfs_dentry_delete(const struct dentry *dentry)
{
struct sysfs_dirent *sd = dentry->d_fsdata;
- return !!(sd->s_flags & SYSFS_FLAG_REMOVED);
+ return !(sd && !(sd->s_flags & SYSFS_FLAG_REMOVED));
}
-static int sysfs_dentry_revalidate(struct dentry *dentry, struct nameidata *nd)
+static int sysfs_dentry_revalidate(struct dentry *dentry, unsigned int flags)
{
struct sysfs_dirent *sd;
int is_dir;
- if (nd->flags & LOOKUP_RCU)
+ if (flags & LOOKUP_RCU)
return -ECHILD;
sd = dentry->d_fsdata;
@@ -355,18 +355,15 @@
return 0;
}
-static void sysfs_dentry_iput(struct dentry *dentry, struct inode *inode)
+static void sysfs_dentry_release(struct dentry *dentry)
{
- struct sysfs_dirent * sd = dentry->d_fsdata;
-
- sysfs_put(sd);
- iput(inode);
+ sysfs_put(dentry->d_fsdata);
}
-static const struct dentry_operations sysfs_dentry_ops = {
+const struct dentry_operations sysfs_dentry_ops = {
.d_revalidate = sysfs_dentry_revalidate,
.d_delete = sysfs_dentry_delete,
- .d_iput = sysfs_dentry_iput,
+ .d_release = sysfs_dentry_release,
};
struct sysfs_dirent *sysfs_new_dirent(const char *name, umode_t mode, int type)
@@ -764,7 +761,7 @@
}
static struct dentry * sysfs_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct dentry *ret = NULL;
struct dentry *parent = dentry->d_parent;
@@ -786,6 +783,7 @@
ret = ERR_PTR(-ENOENT);
goto out_unlock;
}
+ dentry->d_fsdata = sysfs_get(sd);
/* attach dentry and inode */
inode = sysfs_get_inode(dir->i_sb, sd);
@@ -795,16 +793,7 @@
}
/* instantiate and hash dentry */
- ret = d_find_alias(inode);
- if (!ret) {
- d_set_d_op(dentry, &sysfs_dentry_ops);
- dentry->d_fsdata = sysfs_get(sd);
- d_add(dentry, inode);
- } else {
- d_move(ret, dentry);
- iput(inode);
- }
-
+ ret = d_materialise_unique(dentry, inode);
out_unlock:
mutex_unlock(&sysfs_mutex);
return ret;
diff --git a/fs/sysfs/mount.c b/fs/sysfs/mount.c
index 52c3bdb..71eb7e2 100644
--- a/fs/sysfs/mount.c
+++ b/fs/sysfs/mount.c
@@ -68,6 +68,7 @@
}
root->d_fsdata = &sysfs_root;
sb->s_root = root;
+ sb->s_d_op = &sysfs_dentry_ops;
return 0;
}
@@ -117,13 +118,12 @@
for (type = KOBJ_NS_TYPE_NONE; type < KOBJ_NS_TYPES; type++)
info->ns[type] = kobj_ns_grab_current(type);
- sb = sget(fs_type, sysfs_test_super, sysfs_set_super, info);
+ sb = sget(fs_type, sysfs_test_super, sysfs_set_super, flags, info);
if (IS_ERR(sb) || sb->s_fs_info != info)
free_sysfs_super_info(info);
if (IS_ERR(sb))
return ERR_CAST(sb);
if (!sb->s_root) {
- sb->s_flags = flags;
error = sysfs_fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
if (error) {
deactivate_locked_super(sb);
diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h
index 661a963..d73c093 100644
--- a/fs/sysfs/sysfs.h
+++ b/fs/sysfs/sysfs.h
@@ -157,6 +157,7 @@
*/
extern struct mutex sysfs_mutex;
extern spinlock_t sysfs_assoc_lock;
+extern const struct dentry_operations sysfs_dentry_ops;
extern const struct file_operations sysfs_dir_operations;
extern const struct inode_operations sysfs_dir_inode_operations;
diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c
index 08d0b25..80e1e2b 100644
--- a/fs/sysv/inode.c
+++ b/fs/sysv/inode.c
@@ -43,7 +43,6 @@
* then attach current time stamp.
* But if the filesystem was marked clean, keep it clean.
*/
- sb->s_dirt = 0;
old_time = fs32_to_cpu(sbi, *sbi->s_sb_time);
if (sbi->s_type == FSTYPE_SYSV4) {
if (*sbi->s_sb_state == cpu_to_fs32(sbi, 0x7c269d38 - old_time))
@@ -57,23 +56,12 @@
return 0;
}
-static void sysv_write_super(struct super_block *sb)
-{
- if (!(sb->s_flags & MS_RDONLY))
- sysv_sync_fs(sb, 1);
- else
- sb->s_dirt = 0;
-}
-
static int sysv_remount(struct super_block *sb, int *flags, char *data)
{
struct sysv_sb_info *sbi = SYSV_SB(sb);
- lock_super(sb);
+
if (sbi->s_forced_ro)
*flags |= MS_RDONLY;
- if (*flags & MS_RDONLY)
- sysv_write_super(sb);
- unlock_super(sb);
return 0;
}
@@ -81,9 +69,6 @@
{
struct sysv_sb_info *sbi = SYSV_SB(sb);
- if (sb->s_dirt)
- sysv_write_super(sb);
-
if (!(sb->s_flags & MS_RDONLY)) {
/* XXX ext2 also updates the state here */
mark_buffer_dirty(sbi->s_bh1);
@@ -357,7 +342,6 @@
.write_inode = sysv_write_inode,
.evict_inode = sysv_evict_inode,
.put_super = sysv_put_super,
- .write_super = sysv_write_super,
.sync_fs = sysv_sync_fs,
.remount_fs = sysv_remount,
.statfs = sysv_statfs,
diff --git a/fs/sysv/namei.c b/fs/sysv/namei.c
index d7466e2..1c0d5f2 100644
--- a/fs/sysv/namei.c
+++ b/fs/sysv/namei.c
@@ -43,7 +43,7 @@
.d_hash = sysv_hash,
};
-static struct dentry *sysv_lookup(struct inode * dir, struct dentry * dentry, struct nameidata *nd)
+static struct dentry *sysv_lookup(struct inode * dir, struct dentry * dentry, unsigned int flags)
{
struct inode * inode = NULL;
ino_t ino;
@@ -80,7 +80,7 @@
return err;
}
-static int sysv_create(struct inode * dir, struct dentry * dentry, umode_t mode, struct nameidata *nd)
+static int sysv_create(struct inode * dir, struct dentry * dentry, umode_t mode, bool excl)
{
return sysv_mknod(dir, dentry, mode, 0);
}
diff --git a/fs/sysv/sysv.h b/fs/sysv/sysv.h
index 11b07672..0bc35fd 100644
--- a/fs/sysv/sysv.h
+++ b/fs/sysv/sysv.h
@@ -117,7 +117,6 @@
mark_buffer_dirty(sbi->s_bh1);
if (sbi->s_bh1 != sbi->s_bh2)
mark_buffer_dirty(sbi->s_bh2);
- sb->s_dirt = 1;
}
diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c
index 84a7e6f..bb31672 100644
--- a/fs/ubifs/debug.c
+++ b/fs/ubifs/debug.c
@@ -2802,6 +2802,8 @@
val = d->chk_fs;
else if (dent == d->dfs_tst_rcvry)
val = d->tst_rcvry;
+ else if (dent == d->dfs_ro_error)
+ val = c->ro_error;
else
return -EINVAL;
@@ -2885,6 +2887,8 @@
d->chk_fs = val;
else if (dent == d->dfs_tst_rcvry)
d->tst_rcvry = val;
+ else if (dent == d->dfs_ro_error)
+ c->ro_error = !!val;
else
return -EINVAL;
@@ -2918,7 +2922,7 @@
struct dentry *dent;
struct ubifs_debug_info *d = c->dbg;
- if (!IS_ENABLED(DEBUG_FS))
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
return 0;
n = snprintf(d->dfs_dir_name, UBIFS_DFS_DIR_LEN + 1, UBIFS_DFS_DIR_NAME,
@@ -2996,6 +3000,13 @@
goto out_remove;
d->dfs_tst_rcvry = dent;
+ fname = "ro_error";
+ dent = debugfs_create_file(fname, S_IRUSR | S_IWUSR, d->dfs_dir, c,
+ &dfs_fops);
+ if (IS_ERR_OR_NULL(dent))
+ goto out_remove;
+ d->dfs_ro_error = dent;
+
return 0;
out_remove:
@@ -3013,7 +3024,7 @@
*/
void dbg_debugfs_exit_fs(struct ubifs_info *c)
{
- if (IS_ENABLED(DEBUG_FS))
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
debugfs_remove_recursive(c->dbg->dfs_dir);
}
@@ -3099,7 +3110,7 @@
const char *fname;
struct dentry *dent;
- if (!IS_ENABLED(DEBUG_FS))
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
return 0;
fname = "ubifs";
@@ -3166,7 +3177,7 @@
*/
void dbg_debugfs_exit(void)
{
- if (IS_ENABLED(DEBUG_FS))
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
debugfs_remove_recursive(dfs_rootdir);
}
diff --git a/fs/ubifs/debug.h b/fs/ubifs/debug.h
index 486a8e0..8b8cc4e 100644
--- a/fs/ubifs/debug.h
+++ b/fs/ubifs/debug.h
@@ -79,6 +79,10 @@
* @dfs_chk_lprops: debugfs knob to enable UBIFS LEP properties extra checks
* @dfs_chk_fs: debugfs knob to enable UBIFS contents extra checks
* @dfs_tst_rcvry: debugfs knob to enable UBIFS recovery testing
+ * @dfs_ro_error: debugfs knob to switch UBIFS to R/O mode (different to
+ * re-mounting to R/O mode because it does not flush any buffers
+ * and UBIFS just starts returning -EROFS on all write
+ * operations)
*/
struct ubifs_debug_info {
struct ubifs_zbranch old_zroot;
@@ -122,6 +126,7 @@
struct dentry *dfs_chk_lprops;
struct dentry *dfs_chk_fs;
struct dentry *dfs_tst_rcvry;
+ struct dentry *dfs_ro_error;
};
/**
diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c
index a6d42ef..c95681c 100644
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -184,7 +184,7 @@
}
static struct dentry *ubifs_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
int err;
union ubifs_key key;
@@ -246,7 +246,7 @@
}
static int ubifs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
struct inode *inode;
struct ubifs_info *c = dir->i_sb->s_fs_info;
@@ -969,7 +969,7 @@
struct ubifs_budget_req ino_req = { .dirtied_ino = 1,
.dirtied_ino_d = ALIGN(old_inode_ui->data_len, 8) };
struct timespec time;
- unsigned int saved_nlink;
+ unsigned int uninitialized_var(saved_nlink);
/*
* Budget request settings: deletion direntry, new direntry, removing
diff --git a/fs/ubifs/find.c b/fs/ubifs/find.c
index 2559d17..28ec13a 100644
--- a/fs/ubifs/find.c
+++ b/fs/ubifs/find.c
@@ -939,8 +939,8 @@
}
dbg_find("LEB %d, dirty %d and free %d flags %#x", lp->lnum, lp->dirty,
lp->free, lp->flags);
- ubifs_assert(lp->flags | LPROPS_TAKEN);
- ubifs_assert(lp->flags | LPROPS_INDEX);
+ ubifs_assert(lp->flags & LPROPS_TAKEN);
+ ubifs_assert(lp->flags & LPROPS_INDEX);
return lnum;
}
diff --git a/fs/ubifs/orphan.c b/fs/ubifs/orphan.c
index b02734d..cebf17e 100644
--- a/fs/ubifs/orphan.c
+++ b/fs/ubifs/orphan.c
@@ -176,7 +176,7 @@
*last = orphan;
last = &orphan->cnext;
}
- *last = orphan->cnext;
+ *last = NULL;
c->cmt_orphans = c->new_orphans;
c->new_orphans = 0;
dbg_cmt("%d orphans to commit", c->cmt_orphans);
@@ -382,7 +382,7 @@
last = &orphan->cnext;
cnt += 1;
}
- *last = orphan->cnext;
+ *last = NULL;
ubifs_assert(cnt == c->tot_orphans - c->new_orphans);
c->cmt_orphans = cnt;
c->ohead_lnum = c->orph_first;
diff --git a/fs/ubifs/replay.c b/fs/ubifs/replay.c
index 3a2da7e..eba46d4 100644
--- a/fs/ubifs/replay.c
+++ b/fs/ubifs/replay.c
@@ -1007,7 +1007,7 @@
*/
int ubifs_replay_journal(struct ubifs_info *c)
{
- int err, i, lnum, offs, free;
+ int err, lnum, free;
BUILD_BUG_ON(UBIFS_TRUN_KEY > 5);
@@ -1025,25 +1025,17 @@
dbg_mnt("start replaying the journal");
c->replaying = 1;
lnum = c->ltail_lnum = c->lhead_lnum;
- offs = c->lhead_offs;
- for (i = 0; i < c->log_lebs; i++, lnum++) {
- if (lnum >= UBIFS_LOG_LNUM + c->log_lebs) {
- /*
- * The log is logically circular, we reached the last
- * LEB, switch to the first one.
- */
- lnum = UBIFS_LOG_LNUM;
- offs = 0;
- }
- err = replay_log_leb(c, lnum, offs, c->sbuf);
+ lnum = UBIFS_LOG_LNUM;
+ do {
+ err = replay_log_leb(c, lnum, 0, c->sbuf);
if (err == 1)
/* We hit the end of the log */
break;
if (err)
goto out;
- offs = 0;
- }
+ lnum = ubifs_next_log_lnum(c, lnum);
+ } while (lnum != UBIFS_LOG_LNUM);
err = replay_buds(c);
if (err)
diff --git a/fs/ubifs/sb.c b/fs/ubifs/sb.c
index ef3d1ba..15e2fc5 100644
--- a/fs/ubifs/sb.c
+++ b/fs/ubifs/sb.c
@@ -718,8 +718,12 @@
lnum = ubifs_next_log_lnum(c, lnum);
}
- /* Fixup the current log head */
- err = fixup_leb(c, c->lhead_lnum, c->lhead_offs);
+ /*
+ * Fixup the log head which contains the only a CS node at the
+ * beginning.
+ */
+ err = fixup_leb(c, c->lhead_lnum,
+ ALIGN(UBIFS_CS_NODE_SZ, c->min_io_size));
if (err)
goto out;
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 5862dd9..1c766c3 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -2136,7 +2136,7 @@
dbg_gen("opened ubi%d_%d", c->vi.ubi_num, c->vi.vol_id);
- sb = sget(fs_type, sb_test, sb_set, c);
+ sb = sget(fs_type, sb_test, sb_set, flags, c);
if (IS_ERR(sb)) {
err = PTR_ERR(sb);
kfree(c);
@@ -2153,7 +2153,6 @@
goto out_deact;
}
} else {
- sb->s_flags = flags;
err = ubifs_fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
if (err)
goto out_deact;
diff --git a/fs/udf/namei.c b/fs/udf/namei.c
index 1802417..544b279 100644
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -251,7 +251,7 @@
}
static struct dentry *udf_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct inode *inode = NULL;
struct fileIdentDesc cfi;
@@ -551,7 +551,7 @@
}
static int udf_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
struct udf_fileident_bh fibh;
struct inode *inode;
diff --git a/fs/udf/super.c b/fs/udf/super.c
index ac8a348..8d86a87 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -56,6 +56,7 @@
#include <linux/seq_file.h>
#include <linux/bitmap.h>
#include <linux/crc-itu-t.h>
+#include <linux/log2.h>
#include <asm/byteorder.h>
#include "udf_sb.h"
@@ -1215,16 +1216,65 @@
return ret;
}
+static int udf_load_sparable_map(struct super_block *sb,
+ struct udf_part_map *map,
+ struct sparablePartitionMap *spm)
+{
+ uint32_t loc;
+ uint16_t ident;
+ struct sparingTable *st;
+ struct udf_sparing_data *sdata = &map->s_type_specific.s_sparing;
+ int i;
+ struct buffer_head *bh;
+
+ map->s_partition_type = UDF_SPARABLE_MAP15;
+ sdata->s_packet_len = le16_to_cpu(spm->packetLength);
+ if (!is_power_of_2(sdata->s_packet_len)) {
+ udf_err(sb, "error loading logical volume descriptor: "
+ "Invalid packet length %u\n",
+ (unsigned)sdata->s_packet_len);
+ return -EIO;
+ }
+ if (spm->numSparingTables > 4) {
+ udf_err(sb, "error loading logical volume descriptor: "
+ "Too many sparing tables (%d)\n",
+ (int)spm->numSparingTables);
+ return -EIO;
+ }
+
+ for (i = 0; i < spm->numSparingTables; i++) {
+ loc = le32_to_cpu(spm->locSparingTable[i]);
+ bh = udf_read_tagged(sb, loc, loc, &ident);
+ if (!bh)
+ continue;
+
+ st = (struct sparingTable *)bh->b_data;
+ if (ident != 0 ||
+ strncmp(st->sparingIdent.ident, UDF_ID_SPARING,
+ strlen(UDF_ID_SPARING)) ||
+ sizeof(*st) + le16_to_cpu(st->reallocationTableLen) >
+ sb->s_blocksize) {
+ brelse(bh);
+ continue;
+ }
+
+ sdata->s_spar_map[i] = bh;
+ }
+ map->s_partition_func = udf_get_pblock_spar15;
+ return 0;
+}
+
static int udf_load_logicalvol(struct super_block *sb, sector_t block,
struct kernel_lb_addr *fileset)
{
struct logicalVolDesc *lvd;
- int i, j, offset;
+ int i, offset;
uint8_t type;
struct udf_sb_info *sbi = UDF_SB(sb);
struct genericPartitionMap *gpm;
uint16_t ident;
struct buffer_head *bh;
+ unsigned int table_len;
int ret = 0;
bh = udf_read_tagged(sb, block, block, &ident);
@@ -1232,15 +1282,20 @@
return 1;
BUG_ON(ident != TAG_IDENT_LVD);
lvd = (struct logicalVolDesc *)bh->b_data;
-
- i = udf_sb_alloc_partition_maps(sb, le32_to_cpu(lvd->numPartitionMaps));
- if (i != 0) {
- ret = i;
+ table_len = le32_to_cpu(lvd->mapTableLength);
+ if (sizeof(*lvd) + table_len > sb->s_blocksize) {
+ udf_err(sb, "error loading logical volume descriptor: "
+ "Partition table too long (%u > %lu)\n", table_len,
+ sb->s_blocksize - sizeof(*lvd));
goto out_bh;
}
+ ret = udf_sb_alloc_partition_maps(sb, le32_to_cpu(lvd->numPartitionMaps));
+ if (ret)
+ goto out_bh;
+
for (i = 0, offset = 0;
- i < sbi->s_partitions && offset < le32_to_cpu(lvd->mapTableLength);
+ i < sbi->s_partitions && offset < table_len;
i++, offset += gpm->partitionMapLength) {
struct udf_part_map *map = &sbi->s_partmaps[i];
gpm = (struct genericPartitionMap *)
@@ -1275,38 +1330,9 @@
} else if (!strncmp(upm2->partIdent.ident,
UDF_ID_SPARABLE,
strlen(UDF_ID_SPARABLE))) {
- uint32_t loc;
- struct sparingTable *st;
- struct sparablePartitionMap *spm =
- (struct sparablePartitionMap *)gpm;
-
- map->s_partition_type = UDF_SPARABLE_MAP15;
- map->s_type_specific.s_sparing.s_packet_len =
- le16_to_cpu(spm->packetLength);
- for (j = 0; j < spm->numSparingTables; j++) {
- struct buffer_head *bh2;
-
- loc = le32_to_cpu(
- spm->locSparingTable[j]);
- bh2 = udf_read_tagged(sb, loc, loc,
- &ident);
- map->s_type_specific.s_sparing.
- s_spar_map[j] = bh2;
-
- if (bh2 == NULL)
- continue;
-
- st = (struct sparingTable *)bh2->b_data;
- if (ident != 0 || strncmp(
- st->sparingIdent.ident,
- UDF_ID_SPARING,
- strlen(UDF_ID_SPARING))) {
- brelse(bh2);
- map->s_type_specific.s_sparing.
- s_spar_map[j] = NULL;
- }
- }
- map->s_partition_func = udf_get_pblock_spar15;
+ if (udf_load_sparable_map(sb, map,
+ (struct sparablePartitionMap *)gpm) < 0)
+ goto out_bh;
} else if (!strncmp(upm2->partIdent.ident,
UDF_ID_METADATA,
strlen(UDF_ID_METADATA))) {
diff --git a/fs/ufs/balloc.c b/fs/ufs/balloc.c
index 42694e1..1b3e410 100644
--- a/fs/ufs/balloc.c
+++ b/fs/ufs/balloc.c
@@ -116,7 +116,7 @@
ubh_mark_buffer_dirty (UCPI_UBH(ucpi));
if (sb->s_flags & MS_SYNCHRONOUS)
ubh_sync_block(UCPI_UBH(ucpi));
- sb->s_dirt = 1;
+ ufs_mark_sb_dirty(sb);
unlock_super (sb);
UFSD("EXIT\n");
@@ -214,7 +214,7 @@
goto do_more;
}
- sb->s_dirt = 1;
+ ufs_mark_sb_dirty(sb);
unlock_super (sb);
UFSD("EXIT\n");
return;
@@ -557,7 +557,7 @@
ubh_mark_buffer_dirty (UCPI_UBH(ucpi));
if (sb->s_flags & MS_SYNCHRONOUS)
ubh_sync_block(UCPI_UBH(ucpi));
- sb->s_dirt = 1;
+ ufs_mark_sb_dirty(sb);
UFSD("EXIT, fragment %llu\n", (unsigned long long)fragment);
@@ -677,7 +677,7 @@
ubh_mark_buffer_dirty (UCPI_UBH(ucpi));
if (sb->s_flags & MS_SYNCHRONOUS)
ubh_sync_block(UCPI_UBH(ucpi));
- sb->s_dirt = 1;
+ ufs_mark_sb_dirty(sb);
result += cgno * uspi->s_fpg;
UFSD("EXIT3, result %llu\n", (unsigned long long)result);
diff --git a/fs/ufs/ialloc.c b/fs/ufs/ialloc.c
index 4ec5c10..e84cbe2 100644
--- a/fs/ufs/ialloc.c
+++ b/fs/ufs/ialloc.c
@@ -116,7 +116,7 @@
if (sb->s_flags & MS_SYNCHRONOUS)
ubh_sync_block(UCPI_UBH(ucpi));
- sb->s_dirt = 1;
+ ufs_mark_sb_dirty(sb);
unlock_super (sb);
UFSD("EXIT\n");
}
@@ -288,7 +288,7 @@
ubh_mark_buffer_dirty (UCPI_UBH(ucpi));
if (sb->s_flags & MS_SYNCHRONOUS)
ubh_sync_block(UCPI_UBH(ucpi));
- sb->s_dirt = 1;
+ ufs_mark_sb_dirty(sb);
inode->i_ino = cg * uspi->s_ipg + bit;
inode_init_owner(inode, dir, mode);
diff --git a/fs/ufs/namei.c b/fs/ufs/namei.c
index a2281ca..90d74b8 100644
--- a/fs/ufs/namei.c
+++ b/fs/ufs/namei.c
@@ -46,7 +46,7 @@
return err;
}
-static struct dentry *ufs_lookup(struct inode * dir, struct dentry *dentry, struct nameidata *nd)
+static struct dentry *ufs_lookup(struct inode * dir, struct dentry *dentry, unsigned int flags)
{
struct inode * inode = NULL;
ino_t ino;
@@ -71,7 +71,7 @@
* with d_instantiate().
*/
static int ufs_create (struct inode * dir, struct dentry * dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
struct inode *inode;
int err;
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 302f340..444927e 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -302,7 +302,7 @@
if (!(sb->s_flags & MS_RDONLY)) {
usb1->fs_clean = UFS_FSBAD;
ubh_mark_buffer_dirty(USPI_UBH(uspi));
- sb->s_dirt = 1;
+ ufs_mark_sb_dirty(sb);
sb->s_flags |= MS_RDONLY;
}
va_start (args, fmt);
@@ -334,7 +334,7 @@
if (!(sb->s_flags & MS_RDONLY)) {
usb1->fs_clean = UFS_FSBAD;
ubh_mark_buffer_dirty(USPI_UBH(uspi));
- sb->s_dirt = 1;
+ ufs_mark_sb_dirty(sb);
}
va_start (args, fmt);
vsnprintf (error_buf, sizeof(error_buf), fmt, args);
@@ -691,6 +691,83 @@
UFSD("EXIT\n");
}
+static int ufs_sync_fs(struct super_block *sb, int wait)
+{
+ struct ufs_sb_private_info * uspi;
+ struct ufs_super_block_first * usb1;
+ struct ufs_super_block_third * usb3;
+ unsigned flags;
+
+ lock_ufs(sb);
+ lock_super(sb);
+
+ UFSD("ENTER\n");
+
+ flags = UFS_SB(sb)->s_flags;
+ uspi = UFS_SB(sb)->s_uspi;
+ usb1 = ubh_get_usb_first(uspi);
+ usb3 = ubh_get_usb_third(uspi);
+
+ usb1->fs_time = cpu_to_fs32(sb, get_seconds());
+ if ((flags & UFS_ST_MASK) == UFS_ST_SUN ||
+ (flags & UFS_ST_MASK) == UFS_ST_SUNOS ||
+ (flags & UFS_ST_MASK) == UFS_ST_SUNx86)
+ ufs_set_fs_state(sb, usb1, usb3,
+ UFS_FSOK - fs32_to_cpu(sb, usb1->fs_time));
+ ufs_put_cstotal(sb);
+
+ UFSD("EXIT\n");
+ unlock_super(sb);
+ unlock_ufs(sb);
+
+ return 0;
+}
+
+static void delayed_sync_fs(struct work_struct *work)
+{
+ struct ufs_sb_info *sbi;
+
+ sbi = container_of(work, struct ufs_sb_info, sync_work.work);
+
+ spin_lock(&sbi->work_lock);
+ sbi->work_queued = 0;
+ spin_unlock(&sbi->work_lock);
+
+ ufs_sync_fs(sbi->sb, 1);
+}
+
+void ufs_mark_sb_dirty(struct super_block *sb)
+{
+ struct ufs_sb_info *sbi = UFS_SB(sb);
+ unsigned long delay;
+
+ spin_lock(&sbi->work_lock);
+ if (!sbi->work_queued) {
+ delay = msecs_to_jiffies(dirty_writeback_interval * 10);
+ queue_delayed_work(system_long_wq, &sbi->sync_work, delay);
+ sbi->work_queued = 1;
+ }
+ spin_unlock(&sbi->work_lock);
+}
+
+static void ufs_put_super(struct super_block *sb)
+{
+ struct ufs_sb_info * sbi = UFS_SB(sb);
+
+ UFSD("ENTER\n");
+
+ if (!(sb->s_flags & MS_RDONLY))
+ ufs_put_super_internal(sb);
+ cancel_delayed_work_sync(&sbi->sync_work);
+
+ ubh_brelse_uspi (sbi->s_uspi);
+ kfree (sbi->s_uspi);
+ kfree (sbi);
+ sb->s_fs_info = NULL;
+ UFSD("EXIT\n");
+ return;
+}
+
static int ufs_fill_super(struct super_block *sb, void *data, int silent)
{
struct ufs_sb_info * sbi;
@@ -716,6 +793,7 @@
if (!sbi)
goto failed_nomem;
sb->s_fs_info = sbi;
+ sbi->sb = sb;
UFSD("flag %u\n", (int)(sb->s_flags & MS_RDONLY));
@@ -727,6 +805,8 @@
}
#endif
mutex_init(&sbi->mutex);
+ spin_lock_init(&sbi->work_lock);
+ INIT_DELAYED_WORK(&sbi->sync_work, delayed_sync_fs);
/*
* Set default mount options
* Parse mount options
@@ -1191,68 +1271,6 @@
return -ENOMEM;
}
-static int ufs_sync_fs(struct super_block *sb, int wait)
-{
- struct ufs_sb_private_info * uspi;
- struct ufs_super_block_first * usb1;
- struct ufs_super_block_third * usb3;
- unsigned flags;
-
- lock_ufs(sb);
- lock_super(sb);
-
- UFSD("ENTER\n");
-
- flags = UFS_SB(sb)->s_flags;
- uspi = UFS_SB(sb)->s_uspi;
- usb1 = ubh_get_usb_first(uspi);
- usb3 = ubh_get_usb_third(uspi);
-
- usb1->fs_time = cpu_to_fs32(sb, get_seconds());
- if ((flags & UFS_ST_MASK) == UFS_ST_SUN ||
- (flags & UFS_ST_MASK) == UFS_ST_SUNOS ||
- (flags & UFS_ST_MASK) == UFS_ST_SUNx86)
- ufs_set_fs_state(sb, usb1, usb3,
- UFS_FSOK - fs32_to_cpu(sb, usb1->fs_time));
- ufs_put_cstotal(sb);
- sb->s_dirt = 0;
-
- UFSD("EXIT\n");
- unlock_super(sb);
- unlock_ufs(sb);
-
- return 0;
-}
-
-static void ufs_write_super(struct super_block *sb)
-{
- if (!(sb->s_flags & MS_RDONLY))
- ufs_sync_fs(sb, 1);
- else
- sb->s_dirt = 0;
-}
-
-static void ufs_put_super(struct super_block *sb)
-{
- struct ufs_sb_info * sbi = UFS_SB(sb);
-
- UFSD("ENTER\n");
-
- if (sb->s_dirt)
- ufs_write_super(sb);
-
- if (!(sb->s_flags & MS_RDONLY))
- ufs_put_super_internal(sb);
-
- ubh_brelse_uspi (sbi->s_uspi);
- kfree (sbi->s_uspi);
- kfree (sbi);
- sb->s_fs_info = NULL;
- UFSD("EXIT\n");
- return;
-}
-
-
static int ufs_remount (struct super_block *sb, int *mount_flags, char *data)
{
struct ufs_sb_private_info * uspi;
@@ -1308,7 +1326,6 @@
ufs_set_fs_state(sb, usb1, usb3,
UFS_FSOK - fs32_to_cpu(sb, usb1->fs_time));
ubh_mark_buffer_dirty (USPI_UBH(uspi));
- sb->s_dirt = 0;
sb->s_flags |= MS_RDONLY;
} else {
/*
@@ -1458,7 +1475,6 @@
.write_inode = ufs_write_inode,
.evict_inode = ufs_evict_inode,
.put_super = ufs_put_super,
- .write_super = ufs_write_super,
.sync_fs = ufs_sync_fs,
.statfs = ufs_statfs,
.remount_fs = ufs_remount,
diff --git a/fs/ufs/ufs.h b/fs/ufs/ufs.h
index 528750b..343e6fc 100644
--- a/fs/ufs/ufs.h
+++ b/fs/ufs/ufs.h
@@ -20,6 +20,10 @@
unsigned s_mount_opt;
struct mutex mutex;
struct task_struct *mutex_owner;
+ struct super_block *sb;
+ int work_queued; /* non-zero if the delayed work is queued */
+ struct delayed_work sync_work; /* FS sync delayed work */
+ spinlock_t work_lock; /* protects sync_work and work_queued */
};
struct ufs_inode_info {
@@ -123,6 +127,7 @@
void ufs_error(struct super_block *, const char *, const char *, ...);
extern __printf(3, 4)
void ufs_panic(struct super_block *, const char *, const char *, ...);
+void ufs_mark_sb_dirty(struct super_block *sb);
/* symlink.c */
extern const struct inode_operations ufs_fast_symlink_inode_operations;
diff --git a/fs/ufs/ufs_fs.h b/fs/ufs/ufs_fs.h
index 8aba544..0cbd5d3 100644
--- a/fs/ufs/ufs_fs.h
+++ b/fs/ufs/ufs_fs.h
@@ -34,6 +34,7 @@
#include <linux/kernel.h>
#include <linux/stat.h>
#include <linux/fs.h>
+#include <linux/workqueue.h>
#include <asm/div64.h>
typedef __u64 __bitwise __fs64;
diff --git a/fs/xfs/xfs_alloc.c b/fs/xfs/xfs_alloc.c
index 229641f..4f33c32 100644
--- a/fs/xfs/xfs_alloc.c
+++ b/fs/xfs/xfs_alloc.c
@@ -1074,12 +1074,13 @@
* If we couldn't get anything, give up.
*/
if (bno_cur_lt == NULL && bno_cur_gt == NULL) {
+ xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR);
+
if (!forced++) {
trace_xfs_alloc_near_busy(args);
xfs_log_force(args->mp, XFS_LOG_SYNC);
goto restart;
}
-
trace_xfs_alloc_size_neither(args);
args->agbno = NULLAGBLOCK;
return 0;
@@ -2433,15 +2434,24 @@
current_restore_flags_nested(&pflags, PF_FSTRANS);
}
-
-int /* error */
+/*
+ * Data allocation requests often come in with little stack to work on. Push
+ * them off to a worker thread so there is lots of stack to use. Metadata
+ * requests, OTOH, are generally from low stack usage paths, so avoid the
+ * context switch overhead here.
+ */
+int
xfs_alloc_vextent(
- xfs_alloc_arg_t *args) /* allocation argument structure */
+ struct xfs_alloc_arg *args)
{
DECLARE_COMPLETION_ONSTACK(done);
+ if (!args->userdata)
+ return __xfs_alloc_vextent(args);
+
+
args->done = &done;
- INIT_WORK(&args->work, xfs_alloc_vextent_worker);
+ INIT_WORK_ONSTACK(&args->work, xfs_alloc_vextent_worker);
queue_work(xfs_alloc_wq, &args->work);
wait_for_completion(&done);
return args->result;
diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index ae31c31..8dad722 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -981,10 +981,15 @@
imap_valid = 0;
}
} else {
- if (PageUptodate(page)) {
+ if (PageUptodate(page))
ASSERT(buffer_mapped(bh));
- imap_valid = 0;
- }
+ /*
+ * This buffer is not uptodate and will not be
+ * written to disk. Ensure that we will put any
+ * subsequent writeable buffers into a new
+ * ioend.
+ */
+ imap_valid = 0;
continue;
}
diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
index 172d3cc..269b35c 100644
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -201,14 +201,7 @@
bp->b_length = numblks;
bp->b_io_length = numblks;
bp->b_flags = flags;
-
- /*
- * We do not set the block number here in the buffer because we have not
- * finished initialising the buffer. We insert the buffer into the cache
- * in this state, so this ensures that we are unable to do IO on a
- * buffer that hasn't been fully initialised.
- */
- bp->b_bn = XFS_BUF_DADDR_NULL;
+ bp->b_bn = blkno;
atomic_set(&bp->b_pin_count, 0);
init_waitqueue_head(&bp->b_waiters);
@@ -567,11 +560,6 @@
if (bp != new_bp)
xfs_buf_free(new_bp);
- /*
- * Now we have a workable buffer, fill in the block number so
- * that we can do IO on it.
- */
- bp->b_bn = blkno;
bp->b_io_length = bp->b_length;
found:
@@ -772,7 +760,7 @@
int error, i;
xfs_buf_t *bp;
- bp = xfs_buf_alloc(target, 0, numblks, 0);
+ bp = xfs_buf_alloc(target, XFS_BUF_DADDR_NULL, numblks, 0);
if (unlikely(bp == NULL))
goto fail;
@@ -1001,27 +989,6 @@
(__uint64_t)XFS_BUF_ADDR(bp), func, bp->b_error, bp->b_length);
}
-int
-xfs_bwrite(
- struct xfs_buf *bp)
-{
- int error;
-
- ASSERT(xfs_buf_islocked(bp));
-
- bp->b_flags |= XBF_WRITE;
- bp->b_flags &= ~(XBF_ASYNC | XBF_READ | _XBF_DELWRI_Q);
-
- xfs_bdstrat_cb(bp);
-
- error = xfs_buf_iowait(bp);
- if (error) {
- xfs_force_shutdown(bp->b_target->bt_mount,
- SHUTDOWN_META_IO_ERROR);
- }
- return error;
-}
-
/*
* Called when we want to stop a buffer from getting written or read.
* We attach the EIO error, muck with its flags, and call xfs_buf_ioend
@@ -1091,14 +1058,7 @@
return EIO;
}
-
-/*
- * All xfs metadata buffers except log state machine buffers
- * get this attached as their b_bdstrat callback function.
- * This is so that we can catch a buffer
- * after prematurely unpinning it to forcibly shutdown the filesystem.
- */
-int
+STATIC int
xfs_bdstrat_cb(
struct xfs_buf *bp)
{
@@ -1119,6 +1079,27 @@
return 0;
}
+int
+xfs_bwrite(
+ struct xfs_buf *bp)
+{
+ int error;
+
+ ASSERT(xfs_buf_islocked(bp));
+
+ bp->b_flags |= XBF_WRITE;
+ bp->b_flags &= ~(XBF_ASYNC | XBF_READ | _XBF_DELWRI_Q);
+
+ xfs_bdstrat_cb(bp);
+
+ error = xfs_buf_iowait(bp);
+ if (error) {
+ xfs_force_shutdown(bp->b_target->bt_mount,
+ SHUTDOWN_META_IO_ERROR);
+ }
+ return error;
+}
+
/*
* Wrapper around bdstrat so that we can stop data from going to disk in case
* we are shutting down the filesystem. Typically user data goes thru this
@@ -1255,7 +1236,7 @@
*/
atomic_set(&bp->b_io_remaining, 1);
_xfs_buf_ioapply(bp);
- _xfs_buf_ioend(bp, 0);
+ _xfs_buf_ioend(bp, 1);
xfs_buf_rele(bp);
}
diff --git a/fs/xfs/xfs_buf.h b/fs/xfs/xfs_buf.h
index 7f1d139..79344c4 100644
--- a/fs/xfs/xfs_buf.h
+++ b/fs/xfs/xfs_buf.h
@@ -180,7 +180,6 @@
extern int xfs_bwrite(struct xfs_buf *bp);
extern void xfsbdstrat(struct xfs_mount *, struct xfs_buf *);
-extern int xfs_bdstrat_cb(struct xfs_buf *);
extern void xfs_buf_ioend(xfs_buf_t *, int);
extern void xfs_buf_ioerror(xfs_buf_t *, int);
diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index 45df2b8..d9e4511 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -954,7 +954,7 @@
if (!XFS_BUF_ISSTALE(bp)) {
bp->b_flags |= XBF_WRITE | XBF_ASYNC | XBF_DONE;
- xfs_bdstrat_cb(bp);
+ xfs_buf_iorequest(bp);
} else {
xfs_buf_relse(bp);
}
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index 6cdbf90c..d041d47 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -505,6 +505,14 @@
}
/*
+ * Stale inode items should force out the iclog.
+ */
+ if (ip->i_flags & XFS_ISTALE) {
+ rval = XFS_ITEM_PINNED;
+ goto out_unlock;
+ }
+
+ /*
* Someone else is already flushing the inode. Nothing we can do
* here but wait for the flush to finish and remove the item from
* the AIL.
@@ -514,15 +522,6 @@
goto out_unlock;
}
- /*
- * Stale inode items should force out the iclog.
- */
- if (ip->i_flags & XFS_ISTALE) {
- xfs_ifunlock(ip);
- xfs_iunlock(ip, XFS_ILOCK_SHARED);
- return XFS_ITEM_PINNED;
- }
-
ASSERT(iip->ili_fields != 0 || XFS_FORCED_SHUTDOWN(ip->i_mount));
ASSERT(iip->ili_logged == 0 || XFS_FORCED_SHUTDOWN(ip->i_mount));
diff --git a/fs/xfs/xfs_ioctl.c b/fs/xfs/xfs_ioctl.c
index 3a05a41..1f1535d 100644
--- a/fs/xfs/xfs_ioctl.c
+++ b/fs/xfs/xfs_ioctl.c
@@ -208,6 +208,7 @@
struct inode *inode;
struct dentry *dentry;
fmode_t fmode;
+ struct path path;
if (!capable(CAP_SYS_ADMIN))
return -XFS_ERROR(EPERM);
@@ -252,8 +253,10 @@
goto out_dput;
}
- filp = dentry_open(dentry, mntget(parfilp->f_path.mnt),
- hreq->oflags, cred);
+ path.mnt = parfilp->f_path.mnt;
+ path.dentry = dentry;
+ filp = dentry_open(&path, hreq->oflags, cred);
+ dput(dentry);
if (IS_ERR(filp)) {
put_unused_fd(fd);
return PTR_ERR(filp);
diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c
index 1a25fd8..9c4340f 100644
--- a/fs/xfs/xfs_iops.c
+++ b/fs/xfs/xfs_iops.c
@@ -179,7 +179,7 @@
struct inode *dir,
struct dentry *dentry,
umode_t mode,
- struct nameidata *nd)
+ bool flags)
{
return xfs_vn_mknod(dir, dentry, mode, 0);
}
@@ -197,7 +197,7 @@
xfs_vn_lookup(
struct inode *dir,
struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct xfs_inode *cip;
struct xfs_name name;
@@ -222,7 +222,7 @@
xfs_vn_ci_lookup(
struct inode *dir,
struct dentry *dentry,
- struct nameidata *nd)
+ unsigned int flags)
{
struct xfs_inode *ip;
struct xfs_name xname;
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index f30d980..d90d4a3 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -38,13 +38,21 @@
kmem_zone_t *xfs_log_ticket_zone;
/* Local miscellaneous function prototypes */
-STATIC int xlog_commit_record(struct log *log, struct xlog_ticket *ticket,
- xlog_in_core_t **, xfs_lsn_t *);
+STATIC int
+xlog_commit_record(
+ struct xlog *log,
+ struct xlog_ticket *ticket,
+ struct xlog_in_core **iclog,
+ xfs_lsn_t *commitlsnp);
+
STATIC xlog_t * xlog_alloc_log(xfs_mount_t *mp,
xfs_buftarg_t *log_target,
xfs_daddr_t blk_offset,
int num_bblks);
-STATIC int xlog_space_left(struct log *log, atomic64_t *head);
+STATIC int
+xlog_space_left(
+ struct xlog *log,
+ atomic64_t *head);
STATIC int xlog_sync(xlog_t *log, xlog_in_core_t *iclog);
STATIC void xlog_dealloc_log(xlog_t *log);
@@ -64,8 +72,10 @@
int eventual_size);
STATIC void xlog_state_want_sync(xlog_t *log, xlog_in_core_t *iclog);
-STATIC void xlog_grant_push_ail(struct log *log,
- int need_bytes);
+STATIC void
+xlog_grant_push_ail(
+ struct xlog *log,
+ int need_bytes);
STATIC void xlog_regrant_reserve_log_space(xlog_t *log,
xlog_ticket_t *ticket);
STATIC void xlog_ungrant_log_space(xlog_t *log,
@@ -73,7 +83,9 @@
#if defined(DEBUG)
STATIC void xlog_verify_dest_ptr(xlog_t *log, char *ptr);
-STATIC void xlog_verify_grant_tail(struct log *log);
+STATIC void
+xlog_verify_grant_tail(
+ struct xlog *log);
STATIC void xlog_verify_iclog(xlog_t *log, xlog_in_core_t *iclog,
int count, boolean_t syncing);
STATIC void xlog_verify_tail_lsn(xlog_t *log, xlog_in_core_t *iclog,
@@ -89,9 +101,9 @@
static void
xlog_grant_sub_space(
- struct log *log,
- atomic64_t *head,
- int bytes)
+ struct xlog *log,
+ atomic64_t *head,
+ int bytes)
{
int64_t head_val = atomic64_read(head);
int64_t new, old;
@@ -115,9 +127,9 @@
static void
xlog_grant_add_space(
- struct log *log,
- atomic64_t *head,
- int bytes)
+ struct xlog *log,
+ atomic64_t *head,
+ int bytes)
{
int64_t head_val = atomic64_read(head);
int64_t new, old;
@@ -165,7 +177,7 @@
static inline int
xlog_ticket_reservation(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic)
{
@@ -182,7 +194,7 @@
STATIC bool
xlog_grant_head_wake(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
int *free_bytes)
{
@@ -204,7 +216,7 @@
STATIC int
xlog_grant_head_wait(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic,
int need_bytes)
@@ -256,7 +268,7 @@
*/
STATIC int
xlog_grant_head_check(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic,
int *need_bytes)
@@ -323,7 +335,7 @@
struct xfs_mount *mp,
struct xlog_ticket *tic)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
int need_bytes;
int error = 0;
@@ -389,7 +401,7 @@
bool permanent,
uint t_type)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xlog_ticket *tic;
int need_bytes;
int error = 0;
@@ -465,7 +477,7 @@
struct xlog_in_core **iclog,
uint flags)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
xfs_lsn_t lsn = 0;
if (XLOG_FORCED_SHUTDOWN(log) ||
@@ -810,6 +822,7 @@
void
xfs_log_unmount(xfs_mount_t *mp)
{
+ cancel_delayed_work_sync(&mp->m_sync_work);
xfs_trans_ail_destroy(mp);
xlog_dealloc_log(mp->m_log);
}
@@ -838,7 +851,7 @@
xfs_log_space_wake(
struct xfs_mount *mp)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
int free_bytes;
if (XLOG_FORCED_SHUTDOWN(log))
@@ -916,7 +929,7 @@
xlog_assign_tail_lsn_locked(
struct xfs_mount *mp)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xfs_log_item *lip;
xfs_lsn_t tail_lsn;
@@ -965,7 +978,7 @@
*/
STATIC int
xlog_space_left(
- struct log *log,
+ struct xlog *log,
atomic64_t *head)
{
int free_bytes;
@@ -1277,7 +1290,7 @@
*/
STATIC int
xlog_commit_record(
- struct log *log,
+ struct xlog *log,
struct xlog_ticket *ticket,
struct xlog_in_core **iclog,
xfs_lsn_t *commitlsnp)
@@ -1311,7 +1324,7 @@
*/
STATIC void
xlog_grant_push_ail(
- struct log *log,
+ struct xlog *log,
int need_bytes)
{
xfs_lsn_t threshold_lsn = 0;
@@ -1790,7 +1803,7 @@
static xlog_op_header_t *
xlog_write_setup_ophdr(
- struct log *log,
+ struct xlog *log,
struct xlog_op_header *ophdr,
struct xlog_ticket *ticket,
uint flags)
@@ -1873,7 +1886,7 @@
static int
xlog_write_copy_finish(
- struct log *log,
+ struct xlog *log,
struct xlog_in_core *iclog,
uint flags,
int *record_cnt,
@@ -1958,7 +1971,7 @@
*/
int
xlog_write(
- struct log *log,
+ struct xlog *log,
struct xfs_log_vec *log_vector,
struct xlog_ticket *ticket,
xfs_lsn_t *start_lsn,
@@ -2821,7 +2834,7 @@
uint flags,
int *log_flushed)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xlog_in_core *iclog;
xfs_lsn_t lsn;
@@ -2969,7 +2982,7 @@
uint flags,
int *log_flushed)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xlog_in_core *iclog;
int already_slept = 0;
@@ -3147,7 +3160,7 @@
*/
xlog_ticket_t *
xlog_ticket_alloc(
- struct log *log,
+ struct xlog *log,
int unit_bytes,
int cnt,
char client,
@@ -3278,7 +3291,7 @@
*/
void
xlog_verify_dest_ptr(
- struct log *log,
+ struct xlog *log,
char *ptr)
{
int i;
@@ -3307,7 +3320,7 @@
*/
STATIC void
xlog_verify_grant_tail(
- struct log *log)
+ struct xlog *log)
{
int tail_cycle, tail_blocks;
int cycle, space;
diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c
index 7d6197c..ddc4529 100644
--- a/fs/xfs/xfs_log_cil.c
+++ b/fs/xfs/xfs_log_cil.c
@@ -44,7 +44,7 @@
*/
static struct xlog_ticket *
xlog_cil_ticket_alloc(
- struct log *log)
+ struct xlog *log)
{
struct xlog_ticket *tic;
@@ -72,7 +72,7 @@
*/
void
xlog_cil_init_post_recovery(
- struct log *log)
+ struct xlog *log)
{
log->l_cilp->xc_ctx->ticket = xlog_cil_ticket_alloc(log);
log->l_cilp->xc_ctx->sequence = 1;
@@ -182,7 +182,7 @@
*/
STATIC void
xfs_cil_prepare_item(
- struct log *log,
+ struct xlog *log,
struct xfs_log_vec *lv,
int *len,
int *diff_iovecs)
@@ -231,7 +231,7 @@
*/
static void
xlog_cil_insert_items(
- struct log *log,
+ struct xlog *log,
struct xfs_log_vec *log_vector,
struct xlog_ticket *ticket)
{
@@ -373,7 +373,7 @@
*/
STATIC int
xlog_cil_push(
- struct log *log)
+ struct xlog *log)
{
struct xfs_cil *cil = log->l_cilp;
struct xfs_log_vec *lv;
@@ -601,7 +601,7 @@
*/
static void
xlog_cil_push_background(
- struct log *log)
+ struct xlog *log)
{
struct xfs_cil *cil = log->l_cilp;
@@ -629,7 +629,7 @@
static void
xlog_cil_push_foreground(
- struct log *log,
+ struct xlog *log,
xfs_lsn_t push_seq)
{
struct xfs_cil *cil = log->l_cilp;
@@ -683,7 +683,7 @@
xfs_lsn_t *commit_lsn,
int flags)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
int log_flags = 0;
struct xfs_log_vec *log_vector;
@@ -754,7 +754,7 @@
*/
xfs_lsn_t
xlog_cil_force_lsn(
- struct log *log,
+ struct xlog *log,
xfs_lsn_t sequence)
{
struct xfs_cil *cil = log->l_cilp;
@@ -833,7 +833,7 @@
*/
int
xlog_cil_init(
- struct log *log)
+ struct xlog *log)
{
struct xfs_cil *cil;
struct xfs_cil_ctx *ctx;
@@ -869,7 +869,7 @@
void
xlog_cil_destroy(
- struct log *log)
+ struct xlog *log)
{
if (log->l_cilp->xc_ctx) {
if (log->l_cilp->xc_ctx->ticket)
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index 5bc3326..72eba22 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -19,7 +19,7 @@
#define __XFS_LOG_PRIV_H__
struct xfs_buf;
-struct log;
+struct xlog;
struct xlog_ticket;
struct xfs_mount;
@@ -352,7 +352,7 @@
struct xlog_in_core *ic_next;
struct xlog_in_core *ic_prev;
struct xfs_buf *ic_bp;
- struct log *ic_log;
+ struct xlog *ic_log;
int ic_size;
int ic_offset;
int ic_bwritecnt;
@@ -409,7 +409,7 @@
* operations almost as efficient as the old logging methods.
*/
struct xfs_cil {
- struct log *xc_log;
+ struct xlog *xc_log;
struct list_head xc_cil;
spinlock_t xc_cil_lock;
struct xfs_cil_ctx *xc_ctx;
@@ -487,7 +487,7 @@
* overflow 31 bits worth of byte offset, so using a byte number will mean
* that round off problems won't occur when releasing partial reservations.
*/
-typedef struct log {
+typedef struct xlog {
/* The following fields don't need locking */
struct xfs_mount *l_mp; /* mount point */
struct xfs_ail *l_ailp; /* AIL log is working with */
@@ -553,9 +553,14 @@
extern void xlog_pack_data(xlog_t *log, xlog_in_core_t *iclog, int);
extern kmem_zone_t *xfs_log_ticket_zone;
-struct xlog_ticket *xlog_ticket_alloc(struct log *log, int unit_bytes,
- int count, char client, bool permanent,
- xfs_km_flags_t alloc_flags);
+struct xlog_ticket *
+xlog_ticket_alloc(
+ struct xlog *log,
+ int unit_bytes,
+ int count,
+ char client,
+ bool permanent,
+ xfs_km_flags_t alloc_flags);
static inline void
@@ -567,9 +572,14 @@
}
void xlog_print_tic_res(struct xfs_mount *mp, struct xlog_ticket *ticket);
-int xlog_write(struct log *log, struct xfs_log_vec *log_vector,
- struct xlog_ticket *tic, xfs_lsn_t *start_lsn,
- xlog_in_core_t **commit_iclog, uint flags);
+int
+xlog_write(
+ struct xlog *log,
+ struct xfs_log_vec *log_vector,
+ struct xlog_ticket *tic,
+ xfs_lsn_t *start_lsn,
+ struct xlog_in_core **commit_iclog,
+ uint flags);
/*
* When we crack an atomic LSN, we sample it first so that the value will not
@@ -629,17 +639,23 @@
/*
* Committed Item List interfaces
*/
-int xlog_cil_init(struct log *log);
-void xlog_cil_init_post_recovery(struct log *log);
-void xlog_cil_destroy(struct log *log);
+int
+xlog_cil_init(struct xlog *log);
+void
+xlog_cil_init_post_recovery(struct xlog *log);
+void
+xlog_cil_destroy(struct xlog *log);
/*
* CIL force routines
*/
-xfs_lsn_t xlog_cil_force_lsn(struct log *log, xfs_lsn_t sequence);
+xfs_lsn_t
+xlog_cil_force_lsn(
+ struct xlog *log,
+ xfs_lsn_t sequence);
static inline void
-xlog_cil_force(struct log *log)
+xlog_cil_force(struct xlog *log)
{
xlog_cil_force_lsn(log, log->l_cilp->xc_current_sequence);
}
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index ca38690..a7be98a 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -1471,8 +1471,8 @@
STATIC int
xlog_recover_add_to_cont_trans(
- struct log *log,
- xlog_recover_t *trans,
+ struct xlog *log,
+ struct xlog_recover *trans,
xfs_caddr_t dp,
int len)
{
@@ -1517,8 +1517,8 @@
*/
STATIC int
xlog_recover_add_to_trans(
- struct log *log,
- xlog_recover_t *trans,
+ struct xlog *log,
+ struct xlog_recover *trans,
xfs_caddr_t dp,
int len)
{
@@ -1588,8 +1588,8 @@
*/
STATIC int
xlog_recover_reorder_trans(
- struct log *log,
- xlog_recover_t *trans,
+ struct xlog *log,
+ struct xlog_recover *trans,
int pass)
{
xlog_recover_item_t *item, *n;
@@ -1642,8 +1642,8 @@
*/
STATIC int
xlog_recover_buffer_pass1(
- struct log *log,
- xlog_recover_item_t *item)
+ struct xlog *log,
+ struct xlog_recover_item *item)
{
xfs_buf_log_format_t *buf_f = item->ri_buf[0].i_addr;
struct list_head *bucket;
@@ -1696,7 +1696,7 @@
*/
STATIC int
xlog_check_buffer_cancelled(
- struct log *log,
+ struct xlog *log,
xfs_daddr_t blkno,
uint len,
ushort flags)
@@ -2689,9 +2689,9 @@
STATIC int
xlog_recover_commit_pass1(
- struct log *log,
- struct xlog_recover *trans,
- xlog_recover_item_t *item)
+ struct xlog *log,
+ struct xlog_recover *trans,
+ struct xlog_recover_item *item)
{
trace_xfs_log_recover_item_recover(log, trans, item, XLOG_RECOVER_PASS1);
@@ -2716,10 +2716,10 @@
STATIC int
xlog_recover_commit_pass2(
- struct log *log,
- struct xlog_recover *trans,
- struct list_head *buffer_list,
- xlog_recover_item_t *item)
+ struct xlog *log,
+ struct xlog_recover *trans,
+ struct list_head *buffer_list,
+ struct xlog_recover_item *item)
{
trace_xfs_log_recover_item_recover(log, trans, item, XLOG_RECOVER_PASS2);
@@ -2753,7 +2753,7 @@
*/
STATIC int
xlog_recover_commit_trans(
- struct log *log,
+ struct xlog *log,
struct xlog_recover *trans,
int pass)
{
@@ -2793,8 +2793,8 @@
STATIC int
xlog_recover_unmount_trans(
- struct log *log,
- xlog_recover_t *trans)
+ struct xlog *log,
+ struct xlog_recover *trans)
{
/* Do nothing now */
xfs_warn(log->l_mp, "%s: Unmount LR", __func__);
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index 8b89c5a..90c1fc9 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -53,7 +53,7 @@
#include "xfs_sync.h"
-struct log;
+struct xlog;
struct xfs_mount_args;
struct xfs_inode;
struct xfs_bmbt_irec;
@@ -133,7 +133,7 @@
uint m_readio_blocks; /* min read size blocks */
uint m_writeio_log; /* min write size log bytes */
uint m_writeio_blocks; /* min write size blocks */
- struct log *m_log; /* log specific stuff */
+ struct xlog *m_log; /* log specific stuff */
int m_logbufs; /* number of log buffers */
int m_logbsize; /* size of each log buffer */
uint m_rsumlevels; /* rt summary levels */
diff --git a/fs/xfs/xfs_sync.c b/fs/xfs/xfs_sync.c
index c9d3409..1e9ee06 100644
--- a/fs/xfs/xfs_sync.c
+++ b/fs/xfs/xfs_sync.c
@@ -386,23 +386,23 @@
* We shouldn't write/force the log if we are in the mount/unmount
* process or on a read only filesystem. The workqueue still needs to be
* active in both cases, however, because it is used for inode reclaim
- * during these times. Use the s_umount semaphore to provide exclusion
- * with unmount.
+ * during these times. Use the MS_ACTIVE flag to avoid doing anything
+ * during mount. Doing work during unmount is avoided by calling
+ * cancel_delayed_work_sync on this work queue before tearing down
+ * the ail and the log in xfs_log_unmount.
*/
- if (down_read_trylock(&mp->m_super->s_umount)) {
- if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {
- /* dgc: errors ignored here */
- if (mp->m_super->s_frozen == SB_UNFROZEN &&
- xfs_log_need_covered(mp))
- error = xfs_fs_log_dummy(mp);
- else
- xfs_log_force(mp, 0);
+ if (!(mp->m_super->s_flags & MS_ACTIVE) &&
+ !(mp->m_flags & XFS_MOUNT_RDONLY)) {
+ /* dgc: errors ignored here */
+ if (mp->m_super->s_frozen == SB_UNFROZEN &&
+ xfs_log_need_covered(mp))
+ error = xfs_fs_log_dummy(mp);
+ else
+ xfs_log_force(mp, 0);
- /* start pushing all the metadata that is currently
- * dirty */
- xfs_ail_push_all(mp->m_ail);
- }
- up_read(&mp->m_super->s_umount);
+ /* start pushing all the metadata that is currently
+ * dirty */
+ xfs_ail_push_all(mp->m_ail);
}
/* queue us up again */
diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h
index 7cf9d35..caf5dab 100644
--- a/fs/xfs/xfs_trace.h
+++ b/fs/xfs/xfs_trace.h
@@ -32,7 +32,7 @@
struct xfs_dquot;
struct xfs_log_item;
struct xlog_ticket;
-struct log;
+struct xlog;
struct xlog_recover;
struct xlog_recover_item;
struct xfs_buf_log_format;
@@ -762,7 +762,7 @@
DEFINE_DQUOT_EVENT(xfs_dqflush_done);
DECLARE_EVENT_CLASS(xfs_loggrant_class,
- TP_PROTO(struct log *log, struct xlog_ticket *tic),
+ TP_PROTO(struct xlog *log, struct xlog_ticket *tic),
TP_ARGS(log, tic),
TP_STRUCT__entry(
__field(dev_t, dev)
@@ -830,7 +830,7 @@
#define DEFINE_LOGGRANT_EVENT(name) \
DEFINE_EVENT(xfs_loggrant_class, name, \
- TP_PROTO(struct log *log, struct xlog_ticket *tic), \
+ TP_PROTO(struct xlog *log, struct xlog_ticket *tic), \
TP_ARGS(log, tic))
DEFINE_LOGGRANT_EVENT(xfs_log_done_nonperm);
DEFINE_LOGGRANT_EVENT(xfs_log_done_perm);
@@ -1664,7 +1664,7 @@
DEFINE_SWAPEXT_EVENT(xfs_swap_extent_after);
DECLARE_EVENT_CLASS(xfs_log_recover_item_class,
- TP_PROTO(struct log *log, struct xlog_recover *trans,
+ TP_PROTO(struct xlog *log, struct xlog_recover *trans,
struct xlog_recover_item *item, int pass),
TP_ARGS(log, trans, item, pass),
TP_STRUCT__entry(
@@ -1698,7 +1698,7 @@
#define DEFINE_LOG_RECOVER_ITEM(name) \
DEFINE_EVENT(xfs_log_recover_item_class, name, \
- TP_PROTO(struct log *log, struct xlog_recover *trans, \
+ TP_PROTO(struct xlog *log, struct xlog_recover *trans, \
struct xlog_recover_item *item, int pass), \
TP_ARGS(log, trans, item, pass))
@@ -1709,7 +1709,7 @@
DEFINE_LOG_RECOVER_ITEM(xfs_log_recover_item_recover);
DECLARE_EVENT_CLASS(xfs_log_recover_buf_item_class,
- TP_PROTO(struct log *log, struct xfs_buf_log_format *buf_f),
+ TP_PROTO(struct xlog *log, struct xfs_buf_log_format *buf_f),
TP_ARGS(log, buf_f),
TP_STRUCT__entry(
__field(dev_t, dev)
@@ -1739,7 +1739,7 @@
#define DEFINE_LOG_RECOVER_BUF_ITEM(name) \
DEFINE_EVENT(xfs_log_recover_buf_item_class, name, \
- TP_PROTO(struct log *log, struct xfs_buf_log_format *buf_f), \
+ TP_PROTO(struct xlog *log, struct xfs_buf_log_format *buf_f), \
TP_ARGS(log, buf_f))
DEFINE_LOG_RECOVER_BUF_ITEM(xfs_log_recover_buf_not_cancel);
@@ -1752,7 +1752,7 @@
DEFINE_LOG_RECOVER_BUF_ITEM(xfs_log_recover_buf_dquot_buf);
DECLARE_EVENT_CLASS(xfs_log_recover_ino_item_class,
- TP_PROTO(struct log *log, struct xfs_inode_log_format *in_f),
+ TP_PROTO(struct xlog *log, struct xfs_inode_log_format *in_f),
TP_ARGS(log, in_f),
TP_STRUCT__entry(
__field(dev_t, dev)
@@ -1790,7 +1790,7 @@
)
#define DEFINE_LOG_RECOVER_INO_ITEM(name) \
DEFINE_EVENT(xfs_log_recover_ino_item_class, name, \
- TP_PROTO(struct log *log, struct xfs_inode_log_format *in_f), \
+ TP_PROTO(struct xlog *log, struct xfs_inode_log_format *in_f), \
TP_ARGS(log, in_f))
DEFINE_LOG_RECOVER_INO_ITEM(xfs_log_recover_inode_recover);
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 9e6e1c6..18fd410 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -117,9 +117,6 @@
typedef int (*acpi_op_add) (struct acpi_device * device);
typedef int (*acpi_op_remove) (struct acpi_device * device, int type);
typedef int (*acpi_op_start) (struct acpi_device * device);
-typedef int (*acpi_op_suspend) (struct acpi_device * device,
- pm_message_t state);
-typedef int (*acpi_op_resume) (struct acpi_device * device);
typedef int (*acpi_op_bind) (struct acpi_device * device);
typedef int (*acpi_op_unbind) (struct acpi_device * device);
typedef void (*acpi_op_notify) (struct acpi_device * device, u32 event);
@@ -133,8 +130,6 @@
acpi_op_add add;
acpi_op_remove remove;
acpi_op_start start;
- acpi_op_suspend suspend;
- acpi_op_resume resume;
acpi_op_bind bind;
acpi_op_unbind unbind;
acpi_op_notify notify;
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 9d65047..64ec644 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -59,10 +59,7 @@
u8 entry_method;
u8 index;
u32 latency;
- u32 latency_ticks;
u32 power;
- u32 usage;
- u64 time;
u8 bm_sts_skip;
char desc[ACPI_CX_DESC_LEN];
};
@@ -334,8 +331,8 @@
int acpi_processor_hotplug(struct acpi_processor *pr);
int acpi_processor_power_exit(struct acpi_processor *pr,
struct acpi_device *device);
-int acpi_processor_suspend(struct acpi_device * device, pm_message_t state);
-int acpi_processor_resume(struct acpi_device * device);
+int acpi_processor_suspend(struct device *dev);
+int acpi_processor_resume(struct device *dev);
extern struct cpuidle_driver acpi_idle_driver;
/* in processor_thermal.c */
diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index 2520a6e..7d10f96 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -3,10 +3,18 @@
#include <linux/compiler.h>
+#ifdef CONFIG_GENERIC_BUG
+#define BUGFLAG_WARNING (1 << 0)
+#define BUGFLAG_TAINT(taint) (BUGFLAG_WARNING | ((taint) << 8))
+#define BUG_GET_TAINT(bug) ((bug)->flags >> 8)
+#endif
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+
#ifdef CONFIG_BUG
#ifdef CONFIG_GENERIC_BUG
-#ifndef __ASSEMBLY__
struct bug_entry {
#ifndef CONFIG_GENERIC_BUG_RELATIVE_POINTERS
unsigned long bug_addr;
@@ -23,12 +31,6 @@
#endif
unsigned short flags;
};
-#endif /* __ASSEMBLY__ */
-
-#define BUGFLAG_WARNING (1 << 0)
-#define BUGFLAG_TAINT(taint) (BUGFLAG_WARNING | ((taint) << 8))
-#define BUG_GET_TAINT(bug) ((bug)->flags >> 8)
-
#endif /* CONFIG_GENERIC_BUG */
/*
@@ -60,7 +62,6 @@
* to provide better diagnostics.
*/
#ifndef __WARN_TAINT
-#ifndef __ASSEMBLY__
extern __printf(3, 4)
void warn_slowpath_fmt(const char *file, const int line,
const char *fmt, ...);
@@ -69,7 +70,6 @@
const char *fmt, ...);
extern void warn_slowpath_null(const char *file, const int line);
#define WANT_WARN_ON_SLOWPATH
-#endif
#define __WARN() warn_slowpath_null(__FILE__, __LINE__)
#define __WARN_printf(arg...) warn_slowpath_fmt(__FILE__, __LINE__, arg)
#define __WARN_printf_taint(taint, arg...) \
@@ -202,4 +202,6 @@
# define WARN_ON_SMP(x) ({0;})
#endif
+#endif /* __ASSEMBLY__ */
+
#endif
diff --git a/include/asm-generic/dma-contiguous.h b/include/asm-generic/dma-contiguous.h
index c544356..294b1e7 100644
--- a/include/asm-generic/dma-contiguous.h
+++ b/include/asm-generic/dma-contiguous.h
@@ -18,7 +18,7 @@
{
if (dev)
dev->cma_area = cma;
- if (!dev || !dma_contiguous_default_area)
+ if (!dev && !dma_contiguous_default_area)
dma_contiguous_default_area = cma;
}
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index 6f2b45a..ff4947b 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -484,6 +484,16 @@
/*
* The barrier will stabilize the pmdval in a register or on
* the stack so that it will stop changing under the code.
+ *
+ * When CONFIG_TRANSPARENT_HUGEPAGE=y on x86 32bit PAE,
+ * pmd_read_atomic is allowed to return a not atomic pmdval
+ * (for example pointing to an hugepage that has never been
+ * mapped in the pmd). The below checks will only care about
+ * the low part of the pmd with 32bit PAE x86 anyway, with the
+ * exception of pmd_none(). So the important thing is that if
+ * the low part of the pmd is found null, the high part will
+ * be also null or the pmd_none() check below would be
+ * confused.
*/
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
barrier();
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 73e4560..bac55c2 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -54,7 +54,7 @@
struct drm_object_properties *properties;
};
-#define DRM_OBJECT_MAX_PROPERTY 16
+#define DRM_OBJECT_MAX_PROPERTY 24
struct drm_object_properties {
int count;
uint32_t ids[DRM_OBJECT_MAX_PROPERTY];
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 81368ab..a7aec39 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -1,7 +1,3 @@
-/*
- This file is auto-generated from the drm_pciids.txt in the DRM CVS
- Please contact dri-devel@lists.sf.net to add new cards to this list
-*/
#define radeon_PCI_IDS \
{0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
{0x1002, 0x3151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
diff --git a/include/linux/aio.h b/include/linux/aio.h
index 2314ad8..b1a520e 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h
@@ -140,6 +140,7 @@
(x)->ki_dtor = NULL; \
(x)->ki_obj.tsk = tsk; \
(x)->ki_user_data = 0; \
+ (x)->private = NULL; \
} while (0)
#define AIO_RING_MAGIC 0xa10a10a1
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index ba43f40..07954b0 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -827,7 +827,6 @@
extern void blk_complete_request(struct request *);
extern void __blk_complete_request(struct request *);
extern void blk_abort_request(struct request *);
-extern void blk_abort_queue(struct request_queue *);
extern void blk_unprep_request(struct request *);
/*
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index 324fe08..6d6795d 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -91,6 +91,11 @@
unsigned long size,
unsigned long align,
unsigned long goal);
+void *___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
+ unsigned long size,
+ unsigned long align,
+ unsigned long goal,
+ unsigned long limit);
extern void *__alloc_bootmem_low(unsigned long size,
unsigned long align,
unsigned long goal);
diff --git a/include/linux/capability.h b/include/linux/capability.h
index 68d56ef..d10b7ed 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -360,11 +360,11 @@
#define CAP_WAKE_ALARM 35
-/* Allow preventing system suspends while epoll events are pending */
+/* Allow preventing system suspends */
-#define CAP_EPOLLWAKEUP 36
+#define CAP_BLOCK_SUSPEND 36
-#define CAP_LAST_CAP CAP_EPOLLWAKEUP
+#define CAP_LAST_CAP CAP_BLOCK_SUSPEND
#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h
index 2521a95..44c87e7 100644
--- a/include/linux/ceph/messenger.h
+++ b/include/linux/ceph/messenger.h
@@ -163,16 +163,8 @@
/* connection negotiation temps */
char in_banner[CEPH_BANNER_MAX_LEN];
- union {
- struct { /* outgoing connection */
- struct ceph_msg_connect out_connect;
- struct ceph_msg_connect_reply in_reply;
- };
- struct { /* incoming */
- struct ceph_msg_connect in_connect;
- struct ceph_msg_connect_reply out_reply;
- };
- };
+ struct ceph_msg_connect out_connect;
+ struct ceph_msg_connect_reply in_reply;
struct ceph_entity_addr actual_peer_addr;
/* message out temps */
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
index e5834aa..6a6d7ae 100644
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -47,9 +47,9 @@
*/
#if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \
!defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4)
-# define inline inline __attribute__((always_inline))
-# define __inline__ __inline__ __attribute__((always_inline))
-# define __inline __inline __attribute__((always_inline))
+# define inline inline __attribute__((always_inline)) notrace
+# define __inline__ __inline__ __attribute__((always_inline)) notrace
+# define __inline __inline __attribute__((always_inline)) notrace
#else
/* A lot of inline functions can cause havoc with function tracing */
# define inline inline notrace
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 6c26a3d..89dcd30 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -34,6 +34,7 @@
struct cpuidle_state_usage {
void *driver_data;
+ unsigned long long disable;
unsigned long long usage;
unsigned long long time; /* in US */
};
@@ -46,7 +47,7 @@
unsigned int exit_latency; /* in US */
int power_usage; /* in mW */
unsigned int target_residency; /* in US */
- unsigned int disable;
+ bool disabled; /* disabled on all CPUs */
int (*enter) (struct cpuidle_device *dev,
struct cpuidle_driver *drv,
@@ -136,13 +137,17 @@
extern void disable_cpuidle(void);
extern int cpuidle_idle_call(void);
extern int cpuidle_register_driver(struct cpuidle_driver *drv);
-struct cpuidle_driver *cpuidle_get_driver(void);
+extern struct cpuidle_driver *cpuidle_get_driver(void);
+extern struct cpuidle_driver *cpuidle_driver_ref(void);
+extern void cpuidle_driver_unref(void);
extern void cpuidle_unregister_driver(struct cpuidle_driver *drv);
extern int cpuidle_register_device(struct cpuidle_device *dev);
extern void cpuidle_unregister_device(struct cpuidle_device *dev);
extern void cpuidle_pause_and_lock(void);
extern void cpuidle_resume_and_unlock(void);
+extern void cpuidle_pause(void);
+extern void cpuidle_resume(void);
extern int cpuidle_enable_device(struct cpuidle_device *dev);
extern void cpuidle_disable_device(struct cpuidle_device *dev);
extern int cpuidle_wrap_enter(struct cpuidle_device *dev,
@@ -157,6 +162,8 @@
static inline int cpuidle_register_driver(struct cpuidle_driver *drv)
{return -ENODEV; }
static inline struct cpuidle_driver *cpuidle_get_driver(void) {return NULL; }
+static inline struct cpuidle_driver *cpuidle_driver_ref(void) {return NULL; }
+static inline void cpuidle_driver_unref(void) {}
static inline void cpuidle_unregister_driver(struct cpuidle_driver *drv) { }
static inline int cpuidle_register_device(struct cpuidle_device *dev)
{return -ENODEV; }
@@ -164,6 +171,8 @@
static inline void cpuidle_pause_and_lock(void) { }
static inline void cpuidle_resume_and_unlock(void) { }
+static inline void cpuidle_pause(void) { }
+static inline void cpuidle_resume(void) { }
static inline int cpuidle_enable_device(struct cpuidle_device *dev)
{return -ENODEV; }
static inline void cpuidle_disable_device(struct cpuidle_device *dev) { }
@@ -202,14 +211,7 @@
extern int cpuidle_register_governor(struct cpuidle_governor *gov);
extern void cpuidle_unregister_governor(struct cpuidle_governor *gov);
-#ifdef CONFIG_INTEL_IDLE
-extern int intel_idle_cpu_init(int cpu);
#else
-static inline int intel_idle_cpu_init(int cpu) { return -1; }
-#endif
-
-#else
-static inline int intel_idle_cpu_init(int cpu) { return -1; }
static inline int cpuidle_register_governor(struct cpuidle_governor *gov)
{return 0;}
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 094789f..caa34e5 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -128,7 +128,7 @@
struct rcu_head d_rcu;
} d_u;
struct list_head d_subdirs; /* our children */
- struct list_head d_alias; /* inode alias list */
+ struct hlist_node d_alias; /* inode alias list */
};
/*
@@ -144,7 +144,7 @@
};
struct dentry_operations {
- int (*d_revalidate)(struct dentry *, struct nameidata *);
+ int (*d_revalidate)(struct dentry *, unsigned int);
int (*d_hash)(const struct dentry *, const struct inode *,
struct qstr *);
int (*d_compare)(const struct dentry *, const struct inode *,
diff --git a/include/linux/device.h b/include/linux/device.h
index 161d962..6de9415 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -865,8 +865,6 @@
extern struct device *get_device(struct device *dev);
extern void put_device(struct device *dev);
-extern void wait_for_device_probe(void);
-
#ifdef CONFIG_DEVTMPFS
extern int devtmpfs_create_node(struct device *dev);
extern int devtmpfs_delete_node(struct device *dev);
diff --git a/include/linux/dw_apb_timer.h b/include/linux/dw_apb_timer.h
index 07261d5..1148575 100644
--- a/include/linux/dw_apb_timer.h
+++ b/include/linux/dw_apb_timer.h
@@ -53,4 +53,5 @@
cycle_t dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs);
void dw_apb_clocksource_unregister(struct dw_apb_clocksource *dw_cs);
+extern struct sys_timer dw_apb_timer;
#endif /* __DW_APB_TIMER_H__ */
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
index 6f8be32..f4bb378 100644
--- a/include/linux/eventpoll.h
+++ b/include/linux/eventpoll.h
@@ -34,7 +34,7 @@
* re-allowed until epoll_wait is called again after consuming the wakeup
* event(s).
*
- * Requires CAP_EPOLLWAKEUP
+ * Requires CAP_BLOCK_SUSPEND
*/
#define EPOLLWAKEUP (1 << 29)
diff --git a/include/linux/file.h b/include/linux/file.h
index 58bf158..a22408b 100644
--- a/include/linux/file.h
+++ b/include/linux/file.h
@@ -39,4 +39,7 @@
extern void fd_install(unsigned int fd, struct file *file);
+extern void flush_delayed_fput(void);
+extern void __fput_sync(struct file *);
+
#endif /* __LINUX_FILE_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 17fd887..8fabb03 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -826,7 +826,7 @@
struct list_head i_lru; /* inode LRU list */
struct list_head i_sb_list;
union {
- struct list_head i_dentry;
+ struct hlist_head i_dentry;
struct rcu_head i_rcu;
};
u64 i_version;
@@ -1571,7 +1571,7 @@
/*
* VFS helper functions..
*/
-extern int vfs_create(struct inode *, struct dentry *, umode_t, struct nameidata *);
+extern int vfs_create(struct inode *, struct dentry *, umode_t, bool);
extern int vfs_mkdir(struct inode *, struct dentry *, umode_t);
extern int vfs_mknod(struct inode *, struct dentry *, umode_t, dev_t);
extern int vfs_symlink(struct inode *, struct dentry *, const char *);
@@ -1666,7 +1666,7 @@
};
struct inode_operations {
- struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameidata *);
+ struct dentry * (*lookup) (struct inode *,struct dentry *, unsigned int);
void * (*follow_link) (struct dentry *, struct nameidata *);
int (*permission) (struct inode *, int);
struct posix_acl * (*get_acl)(struct inode *, int);
@@ -1674,7 +1674,7 @@
int (*readlink) (struct dentry *, char __user *,int);
void (*put_link) (struct dentry *, struct nameidata *, void *);
- int (*create) (struct inode *,struct dentry *,umode_t,struct nameidata *);
+ int (*create) (struct inode *,struct dentry *, umode_t, bool);
int (*link) (struct dentry *,struct inode *,struct dentry *);
int (*unlink) (struct inode *,struct dentry *);
int (*symlink) (struct inode *,struct dentry *,const char *);
@@ -1693,6 +1693,9 @@
int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start,
u64 len);
int (*update_time)(struct inode *, struct timespec *, int);
+ int (*atomic_open)(struct inode *, struct dentry *,
+ struct file *, unsigned open_flag,
+ umode_t create_mode, int *opened);
} ____cacheline_aligned;
struct seq_file;
@@ -1911,7 +1914,7 @@
struct super_block *sget(struct file_system_type *type,
int (*test)(struct super_block *,void *),
int (*set)(struct super_block *,void *),
- void *data);
+ int flags, void *data);
extern struct dentry *mount_pseudo(struct file_system_type *, char *,
const struct super_operations *ops,
const struct dentry_operations *dops,
@@ -2057,10 +2060,17 @@
extern struct file *filp_open(const char *, int, umode_t);
extern struct file *file_open_root(struct dentry *, struct vfsmount *,
const char *, int);
-extern struct file * dentry_open(struct dentry *, struct vfsmount *, int,
- const struct cred *);
+extern struct file * dentry_open(const struct path *, int, const struct cred *);
extern int filp_close(struct file *, fl_owner_t id);
extern char * getname(const char __user *);
+enum {
+ FILE_CREATED = 1,
+ FILE_OPENED = 2
+};
+extern int finish_open(struct file *file, struct dentry *dentry,
+ int (*open)(struct inode *, struct file *),
+ int *opened);
+extern int finish_no_open(struct file *file, struct dentry *dentry);
/* fs/ioctl.c */
@@ -2091,6 +2101,7 @@
extern void bd_forget(struct inode *inode);
extern void bdput(struct block_device *);
extern void invalidate_bdev(struct block_device *);
+extern void iterate_bdevs(void (*)(struct block_device *, void *), void *);
extern int sync_blockdev(struct block_device *bdev);
extern void kill_bdev(struct block_device *);
extern struct super_block *freeze_bdev(struct block_device *);
@@ -2112,6 +2123,10 @@
{
return 0;
}
+
+static inline void iterate_bdevs(void (*f)(struct block_device *, void *), void *arg)
+{
+}
#endif
extern int sync_filesystem(struct super_block *);
extern const struct file_operations def_blk_fops;
@@ -2438,7 +2453,7 @@
extern loff_t no_llseek(struct file *file, loff_t offset, int origin);
extern loff_t generic_file_llseek(struct file *file, loff_t offset, int origin);
extern loff_t generic_file_llseek_size(struct file *file, loff_t offset,
- int origin, loff_t maxsize);
+ int origin, loff_t maxsize, loff_t eof);
extern int generic_file_open(struct inode * inode, struct file * filp);
extern int nonseekable_open(struct inode * inode, struct file * filp);
@@ -2560,7 +2575,7 @@
loff_t pos, unsigned len, unsigned copied,
struct page *page, void *fsdata);
-extern struct dentry *simple_lookup(struct inode *, struct dentry *, struct nameidata *);
+extern struct dentry *simple_lookup(struct inode *, struct dentry *, unsigned int flags);
extern ssize_t generic_read_dir(struct file *, char __user *, size_t, loff_t *);
extern const struct file_operations simple_dir_operations;
extern const struct inode_operations simple_dir_inode_operations;
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index 176a939..af961d6 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -65,7 +65,7 @@
void *private;
int cpu_file;
struct mutex mutex;
- struct ring_buffer_iter *buffer_iter[NR_CPUS];
+ struct ring_buffer_iter **buffer_iter;
unsigned long iter_flags;
/* trace_seq for __print_flags() and __print_symbolic() etc. */
@@ -207,6 +207,9 @@
* bit 1: enabled
* bit 2: filter_active
* bit 3: enabled cmd record
+ * bit 4: allow trace by non root (cap any)
+ * bit 5: failed to apply filter
+ * bit 6: ftrace internal event (do not enable)
*
* Changes to flags must hold the event_mutex.
*
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index f07fc2d..2e31e8b 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -22,8 +22,8 @@
/* Gpio pin is open source */
#define GPIOF_OPEN_SOURCE (1 << 3)
-#define GPIOF_EXPORT (1 << 2)
-#define GPIOF_EXPORT_CHANGEABLE (1 << 3)
+#define GPIOF_EXPORT (1 << 4)
+#define GPIOF_EXPORT_CHANGEABLE (1 << 5)
#define GPIOF_EXPORT_DIR_FIXED (GPIOF_EXPORT)
#define GPIOF_EXPORT_DIR_CHANGEABLE (GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE)
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index fd0dc30..cc07d27 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -165,6 +165,7 @@
* @lock: lock protecting the base and associated clock bases
* and timers
* @active_bases: Bitfield to mark bases with active timers
+ * @clock_was_set: Indicates that clock was set from irq context.
* @expires_next: absolute time of the next event which was scheduled
* via clock_set_next_event()
* @hres_active: State of high resolution mode
@@ -177,7 +178,8 @@
*/
struct hrtimer_cpu_base {
raw_spinlock_t lock;
- unsigned long active_bases;
+ unsigned int active_bases;
+ unsigned int clock_was_set;
#ifdef CONFIG_HIGH_RES_TIMERS
ktime_t expires_next;
int hres_active;
@@ -286,6 +288,8 @@
# define MONOTONIC_RES_NSEC HIGH_RES_NSEC
# define KTIME_MONOTONIC_RES KTIME_HIGH_RES
+extern void clock_was_set_delayed(void);
+
#else
# define MONOTONIC_RES_NSEC LOW_RES_NSEC
@@ -306,6 +310,9 @@
{
return 0;
}
+
+static inline void clock_was_set_delayed(void) { }
+
#endif
extern void clock_was_set(void);
@@ -320,6 +327,7 @@
extern ktime_t ktime_get_real(void);
extern ktime_t ktime_get_boottime(void);
extern ktime_t ktime_get_monotonic_offset(void);
+extern ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot);
DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 3993477..5553826 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -683,7 +683,6 @@
};
struct twl4030_platform_data {
- unsigned irq_base, irq_end;
struct twl4030_clock_init_data *clock;
struct twl4030_bci_platform_data *bci;
struct twl4030_gpio_platform_data *gpio;
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 9e65eff..8a74761 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -168,8 +168,8 @@
.children = LIST_HEAD_INIT(tsk.children), \
.sibling = LIST_HEAD_INIT(tsk.sibling), \
.group_leader = &tsk, \
- RCU_INIT_POINTER(.real_cred, &init_cred), \
- RCU_INIT_POINTER(.cred, &init_cred), \
+ RCU_POINTER_INITIALIZER(real_cred, &init_cred), \
+ RCU_POINTER_INITIALIZER(cred, &init_cred), \
.comm = INIT_TASK_COMM, \
.thread = INIT_THREAD, \
.fs = &init_fs, \
diff --git a/include/linux/input.h b/include/linux/input.h
index a816714..2740d08 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -116,6 +116,7 @@
/**
* EVIOCGMTSLOTS(len) - get MT slot values
+ * @len: size of the data buffer in bytes
*
* The ioctl buffer argument should be binary equivalent to
*
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
index e6ca56d..78e2ada 100644
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -308,6 +308,8 @@
struct intel_iommu {
void __iomem *reg; /* Pointer to hardware regs, virtual addr */
+ u64 reg_phys; /* physical address of hw register set */
+ u64 reg_size; /* size of hw register set */
u64 cap;
u64 ecap;
u32 gcmd; /* Holds TE, EAFL. Don't need SRTP, SFL, WBF */
diff --git a/include/linux/io.h b/include/linux/io.h
index 7fd2d21..069e407 100644
--- a/include/linux/io.h
+++ b/include/linux/io.h
@@ -67,4 +67,13 @@
const unsigned char *signature, int length);
void devm_ioremap_release(struct device *dev, void *res);
+/*
+ * Some systems do not have legacy ISA devices.
+ * /dev/port is not a valid interface on these systems.
+ * So for those archs, <asm/io.h> should define the following symbol.
+ */
+#ifndef arch_has_dev_port
+#define arch_has_dev_port() (1)
+#endif
+
#endif /* _LINUX_IO_H */
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 61f5cec..553fb66 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -150,9 +150,7 @@
void *handler_data;
void *chip_data;
struct msi_desc *msi_desc;
-#ifdef CONFIG_SMP
cpumask_var_t affinity;
-#endif
};
/*
@@ -301,8 +299,6 @@
* @irq_pm_shutdown: function called from core code on shutdown once per chip
* @irq_print_chip: optional to print special chip info in show_interrupts
* @flags: chip specific flags
- *
- * @release: release function solely used by UML
*/
struct irq_chip {
const char *name;
diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h
index c513a40..0976fc4 100644
--- a/include/linux/jump_label.h
+++ b/include/linux/jump_label.h
@@ -42,8 +42,7 @@
* allowed.
*
* Not initializing the key (static data is initialized to 0s anyway) is the
- * same as using STATIC_KEY_INIT_FALSE and static_key_false() is
- * equivalent with static_branch().
+ * same as using STATIC_KEY_INIT_FALSE.
*
*/
@@ -107,12 +106,6 @@
return !static_key_false(key);
}
-/* Deprecated. Please use 'static_key_false() instead. */
-static __always_inline bool static_branch(struct static_key *key)
-{
- return arch_static_branch(key);
-}
-
extern struct jump_entry __start___jump_table[];
extern struct jump_entry __stop___jump_table[];
@@ -166,14 +159,6 @@
return false;
}
-/* Deprecated. Please use 'static_key_false() instead. */
-static __always_inline bool static_branch(struct static_key *key)
-{
- if (unlikely(atomic_read(&key->enabled)) > 0)
- return true;
- return false;
-}
-
static inline void static_key_slow_inc(struct static_key *key)
{
atomic_inc(&key->enabled);
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index e07f5e0..6043821 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -377,7 +377,6 @@
SYSTEM_HALT,
SYSTEM_POWER_OFF,
SYSTEM_RESTART,
- SYSTEM_SUSPEND_DISK,
} system_state;
#define TAINT_PROPRIETARY_MODULE 0
diff --git a/include/linux/key.h b/include/linux/key.h
index 4cd22ed..cef3b31 100644
--- a/include/linux/key.h
+++ b/include/linux/key.h
@@ -303,7 +303,9 @@
rwsem_is_locked(&((struct key *)(KEY))->sem)))
#define rcu_assign_keypointer(KEY, PAYLOAD) \
- (rcu_assign_pointer((KEY)->payload.rcudata, PAYLOAD))
+do { \
+ rcu_assign_pointer((KEY)->payload.rcudata, (PAYLOAD)); \
+} while (0)
#ifdef CONFIG_SYSCTL
extern ctl_table key_sysctls[];
diff --git a/include/linux/kmsg_dump.h b/include/linux/kmsg_dump.h
index 35f7237..2e7a1e0 100644
--- a/include/linux/kmsg_dump.h
+++ b/include/linux/kmsg_dump.h
@@ -21,6 +21,7 @@
* is passed to the kernel.
*/
enum kmsg_dump_reason {
+ KMSG_DUMP_UNDEF,
KMSG_DUMP_PANIC,
KMSG_DUMP_OOPS,
KMSG_DUMP_EMERG,
@@ -31,23 +32,42 @@
/**
* struct kmsg_dumper - kernel crash message dumper structure
- * @dump: The callback which gets called on crashes. The buffer is passed
- * as two sections, where s1 (length l1) contains the older
- * messages and s2 (length l2) contains the newer.
* @list: Entry in the dumper list (private)
+ * @dump: Call into dumping code which will retrieve the data with
+ * through the record iterator
+ * @max_reason: filter for highest reason number that should be dumped
* @registered: Flag that specifies if this is already registered
*/
struct kmsg_dumper {
- void (*dump)(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason,
- const char *s1, unsigned long l1,
- const char *s2, unsigned long l2);
struct list_head list;
- int registered;
+ void (*dump)(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason);
+ enum kmsg_dump_reason max_reason;
+ bool active;
+ bool registered;
+
+ /* private state of the kmsg iterator */
+ u32 cur_idx;
+ u32 next_idx;
+ u64 cur_seq;
+ u64 next_seq;
};
#ifdef CONFIG_PRINTK
void kmsg_dump(enum kmsg_dump_reason reason);
+bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len);
+
+bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len);
+
+bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+ char *buf, size_t size, size_t *len);
+
+void kmsg_dump_rewind_nolock(struct kmsg_dumper *dumper);
+
+void kmsg_dump_rewind(struct kmsg_dumper *dumper);
+
int kmsg_dump_register(struct kmsg_dumper *dumper);
int kmsg_dump_unregister(struct kmsg_dumper *dumper);
@@ -56,6 +76,33 @@
{
}
+static inline bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper,
+ bool syslog, const char *line,
+ size_t size, size_t *len)
+{
+ return false;
+}
+
+static inline bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+ const char *line, size_t size, size_t *len)
+{
+ return false;
+}
+
+static inline bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+ char *buf, size_t size, size_t *len)
+{
+ return false;
+}
+
+static inline void kmsg_dump_rewind_nolock(struct kmsg_dumper *dumper)
+{
+}
+
+static inline void kmsg_dump_rewind(struct kmsg_dumper *dumper)
+{
+}
+
static inline int kmsg_dump_register(struct kmsg_dumper *dumper)
{
return -EINVAL;
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index c446435..96c158a 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -815,7 +815,7 @@
#ifdef CONFIG_HAVE_KVM_EVENTFD
void kvm_eventfd_init(struct kvm *kvm);
-int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags);
+int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args);
void kvm_irqfd_release(struct kvm *kvm);
void kvm_irq_routing_update(struct kvm *, struct kvm_irq_routing_table *);
int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args);
@@ -824,7 +824,7 @@
static inline void kvm_eventfd_init(struct kvm *kvm) {}
-static inline int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags)
+static inline int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args)
{
return -EINVAL;
}
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index a6bb102..19dc455 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -50,9 +50,7 @@
phys_addr_t size, phys_addr_t align, int nid);
phys_addr_t memblock_find_in_range(phys_addr_t start, phys_addr_t end,
phys_addr_t size, phys_addr_t align);
-int memblock_free_reserved_regions(void);
-int memblock_reserve_reserved_regions(void);
-
+phys_addr_t get_allocated_memblock_reserved_regions_info(phys_addr_t *addr);
void memblock_allow_resize(void);
int memblock_add_node(phys_addr_t base, phys_addr_t size, int nid);
int memblock_add(phys_addr_t base, phys_addr_t size);
diff --git a/include/linux/mfd/s5m87xx/s5m-core.h b/include/linux/mfd/s5m87xx/s5m-core.h
index 21603b4..0b2e0ed 100644
--- a/include/linux/mfd/s5m87xx/s5m-core.h
+++ b/include/linux/mfd/s5m87xx/s5m-core.h
@@ -347,6 +347,7 @@
bool buck_voltage_lock;
int buck_gpios[3];
+ int buck_ds[3];
int buck2_voltage[8];
bool buck2_gpiodvs;
int buck3_voltage[8];
@@ -369,6 +370,10 @@
bool buck2_ramp_enable;
bool buck3_ramp_enable;
bool buck4_ramp_enable;
+
+ int buck2_init;
+ int buck3_init;
+ int buck4_init;
};
#endif /* __LINUX_MFD_S5M_CORE_H */
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index f5171db..d83af39 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -101,6 +101,7 @@
struct tmio_mmc_data {
unsigned int hclk;
unsigned long capabilities;
+ unsigned long capabilities2;
unsigned long flags;
u32 ocr_mask; /* available voltages */
struct tmio_mmc_dma *dma;
@@ -110,6 +111,9 @@
void (*set_clk_div)(struct platform_device *host, int state);
int (*get_cd)(struct platform_device *host);
int (*write16_hook)(struct tmio_mmc_host *host, int addr);
+ /* clock management callbacks */
+ int (*clk_enable)(struct platform_device *pdev, unsigned int *f);
+ void (*clk_disable)(struct platform_device *pdev);
};
/*
diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h
index e030ef9..12c0687 100644
--- a/include/linux/mfd/tps65217.h
+++ b/include/linux/mfd/tps65217.h
@@ -217,7 +217,8 @@
* Board data may be used to initialize regulator.
*/
struct tps65217_board {
- struct regulator_init_data *tps65217_init_data;
+ struct regulator_init_data *tps65217_init_data[TPS65217_NUM_REGULATOR];
+ struct device_node *of_node[TPS65217_NUM_REGULATOR];
};
/**
@@ -227,11 +228,6 @@
* @max_uV: minimum micro volts
* @vsel_to_uv: Function pointer to get voltage from selector
* @uv_to_vsel: Function pointer to get selector from voltage
- * @table: Table for non-uniform voltage step-size
- * @table_len: Length of the voltage table
- * @enable_mask: Regulator enable mask bits
- * @set_vout_reg: Regulator output voltage set register
- * @set_vout_mask: Regulator output voltage set mask
*
* This data is used to check the regualtor voltage limits while setting.
*/
@@ -241,11 +237,6 @@
int max_uV;
int (*vsel_to_uv)(unsigned int vsel);
int (*uv_to_vsel)(int uV, unsigned int *vsel);
- const int *table;
- unsigned int table_len;
- unsigned int enable_mask;
- unsigned int set_vout_reg;
- unsigned int set_vout_mask;
};
/**
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index dd8dc0a..6c4c478 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -880,4 +880,10 @@
return regmap_update_bits(tps65910->regmap, reg, mask, 0);
}
+static inline int tps65910_reg_update_bits(struct tps65910 *tps65910, u8 reg,
+ u8 mask, u8 val)
+{
+ return regmap_update_bits(tps65910->regmap, reg, mask, val);
+}
+
#endif /* __LINUX_MFD_TPS65910_H */
diff --git a/include/linux/mm.h b/include/linux/mm.h
index b36d08c..f9f279c 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1591,6 +1591,7 @@
enum mf_flags {
MF_COUNT_INCREASED = 1 << 0,
MF_ACTION_REQUIRED = 1 << 1,
+ MF_MUST_KILL = 1 << 2,
};
extern int memory_failure(unsigned long pfn, int trapno, int flags);
extern void memory_failure_queue(unsigned long pfn, int trapno, int flags);
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index dad95bd..704a626 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -57,8 +57,18 @@
};
union {
+#if defined(CONFIG_HAVE_CMPXCHG_DOUBLE) && \
+ defined(CONFIG_HAVE_ALIGNED_STRUCT_PAGE)
/* Used for cmpxchg_double in slub */
unsigned long counters;
+#else
+ /*
+ * Keep _count separate from slub cmpxchg_double data.
+ * As the rest of the double word is protected by
+ * slab_lock but _count is not.
+ */
+ unsigned counters;
+#endif
struct {
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index d76513b..111aca5 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -149,6 +149,7 @@
#define SD_SET_CURRENT_LIMIT_400 1
#define SD_SET_CURRENT_LIMIT_600 2
#define SD_SET_CURRENT_LIMIT_800 3
+#define SD_SET_CURRENT_NO_CHANGE (-1)
#define SD_MAX_CURRENT_200 (1 << SD_SET_CURRENT_LIMIT_200)
#define SD_MAX_CURRENT_400 (1 << SD_SET_CURRENT_LIMIT_400)
diff --git a/include/linux/mmc/cd-gpio.h b/include/linux/mmc/cd-gpio.h
deleted file mode 100644
index cefaba0..0000000
--- a/include/linux/mmc/cd-gpio.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Generic GPIO card-detect helper header
- *
- * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef MMC_CD_GPIO_H
-#define MMC_CD_GPIO_H
-
-struct mmc_host;
-int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio);
-void mmc_cd_gpio_free(struct mmc_host *host);
-
-#endif
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 0707d22..f578a71 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -11,6 +11,7 @@
#define LINUX_MMC_HOST_H
#include <linux/leds.h>
+#include <linux/mutex.h>
#include <linux/sched.h>
#include <linux/device.h>
#include <linux/fault-inject.h>
@@ -150,11 +151,31 @@
int (*err_check) (struct mmc_card *, struct mmc_async_req *);
};
-struct mmc_hotplug {
- unsigned int irq;
+/**
+ * struct mmc_slot - MMC slot functions
+ *
+ * @cd_irq: MMC/SD-card slot hotplug detection IRQ or -EINVAL
+ * @lock: protect the @handler_priv pointer
+ * @handler_priv: MMC/SD-card slot context
+ *
+ * Some MMC/SD host controllers implement slot-functions like card and
+ * write-protect detection natively. However, a large number of controllers
+ * leave these functions to the CPU. This struct provides a hook to attach
+ * such slot-function drivers.
+ */
+struct mmc_slot {
+ int cd_irq;
+ struct mutex lock;
void *handler_priv;
};
+struct regulator;
+
+struct mmc_supply {
+ struct regulator *vmmc; /* Card power supply */
+ struct regulator *vqmmc; /* Optional Vccq supply */
+};
+
struct mmc_host {
struct device *parent;
struct device class_dev;
@@ -168,6 +189,9 @@
u32 ocr_avail_sd; /* SD-specific OCR */
u32 ocr_avail_mmc; /* MMC-specific OCR */
struct notifier_block pm_notify;
+ u32 max_current_330;
+ u32 max_current_300;
+ u32 max_current_180;
#define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */
#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */
@@ -211,16 +235,9 @@
#define MMC_CAP_UHS_SDR50 (1 << 17) /* Host supports UHS SDR50 mode */
#define MMC_CAP_UHS_SDR104 (1 << 18) /* Host supports UHS SDR104 mode */
#define MMC_CAP_UHS_DDR50 (1 << 19) /* Host supports UHS DDR50 mode */
-#define MMC_CAP_SET_XPC_330 (1 << 20) /* Host supports >150mA current at 3.3V */
-#define MMC_CAP_SET_XPC_300 (1 << 21) /* Host supports >150mA current at 3.0V */
-#define MMC_CAP_SET_XPC_180 (1 << 22) /* Host supports >150mA current at 1.8V */
#define MMC_CAP_DRIVER_TYPE_A (1 << 23) /* Host supports Driver Type A */
#define MMC_CAP_DRIVER_TYPE_C (1 << 24) /* Host supports Driver Type C */
#define MMC_CAP_DRIVER_TYPE_D (1 << 25) /* Host supports Driver Type D */
-#define MMC_CAP_MAX_CURRENT_200 (1 << 26) /* Host max current limit is 200mA */
-#define MMC_CAP_MAX_CURRENT_400 (1 << 27) /* Host max current limit is 400mA */
-#define MMC_CAP_MAX_CURRENT_600 (1 << 28) /* Host max current limit is 600mA */
-#define MMC_CAP_MAX_CURRENT_800 (1 << 29) /* Host max current limit is 800mA */
#define MMC_CAP_CMD23 (1 << 30) /* CMD23 supported. */
#define MMC_CAP_HW_RESET (1 << 31) /* Hardware reset */
@@ -238,6 +255,8 @@
#define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */
#define MMC_CAP2_DETECT_ON_ERR (1 << 8) /* On I/O err check card removal */
#define MMC_CAP2_HC_ERASE_SZ (1 << 9) /* High-capacity erase size */
+#define MMC_CAP2_CD_ACTIVE_HIGH (1 << 10) /* Card-detect signal active high */
+#define MMC_CAP2_RO_ACTIVE_HIGH (1 << 11) /* Write-protect signal active high */
mmc_pm_flag_t pm_caps; /* supported pm features */
unsigned int power_notify_type;
@@ -290,7 +309,7 @@
struct delayed_work detect;
int detect_change; /* card detect flag */
- struct mmc_hotplug hotplug;
+ struct mmc_slot slot;
const struct mmc_bus_ops *bus_ops; /* current bus driver */
unsigned int bus_refs; /* reference counter */
@@ -309,6 +328,7 @@
#ifdef CONFIG_REGULATOR
bool regulator_enabled; /* regulator state */
#endif
+ struct mmc_supply supply;
struct dentry *debugfs_root;
@@ -357,13 +377,12 @@
wake_up_process(host->sdio_irq_thread);
}
-struct regulator;
-
#ifdef CONFIG_REGULATOR
int mmc_regulator_get_ocrmask(struct regulator *supply);
int mmc_regulator_set_ocr(struct mmc_host *mmc,
struct regulator *supply,
unsigned short vdd_bit);
+int mmc_regulator_get_supply(struct mmc_host *mmc);
#else
static inline int mmc_regulator_get_ocrmask(struct regulator *supply)
{
@@ -376,6 +395,11 @@
{
return 0;
}
+
+static inline int mmc_regulator_get_supply(struct mmc_host *mmc)
+{
+ return 0;
+}
#endif
int mmc_card_awake(struct mmc_host *host);
diff --git a/include/linux/mmc/sdhci-spear.h b/include/linux/mmc/sdhci-spear.h
index 5cdc96d..e78c0e2 100644
--- a/include/linux/mmc/sdhci-spear.h
+++ b/include/linux/mmc/sdhci-spear.h
@@ -4,7 +4,7 @@
* SDHCI declarations specific to ST SPEAr platform
*
* Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index e9051e1..ac83b10 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -122,6 +122,7 @@
#define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */
#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */
#define SDHCI_HS200_NEEDS_TUNING (1<<10) /* HS200 needs tuning */
+#define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */
unsigned int version; /* SDHCI spec. version */
@@ -155,7 +156,8 @@
struct timer_list timer; /* Timer for timeouts */
- unsigned int caps; /* Alternative capabilities */
+ unsigned int caps; /* Alternative CAPABILITY_0 */
+ unsigned int caps1; /* Alternative CAPABILITY_1 */
unsigned int ocr_avail_sdio; /* OCR bit masks */
unsigned int ocr_avail_sd;
diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h
index c9fe66c..17446d3 100644
--- a/include/linux/mmc/sdio.h
+++ b/include/linux/mmc/sdio.h
@@ -98,7 +98,9 @@
#define SDIO_CCCR_IF 0x07 /* bus interface controls */
+#define SDIO_BUS_WIDTH_MASK 0x03 /* data bus width setting */
#define SDIO_BUS_WIDTH_1BIT 0x00
+#define SDIO_BUS_WIDTH_RESERVED 0x01
#define SDIO_BUS_WIDTH_4BIT 0x02
#define SDIO_BUS_ECSI 0x20 /* Enable continuous SPI interrupt */
#define SDIO_BUS_SCSI 0x40 /* Support continuous SPI interrupt */
diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h
index 05f0e3d..c2f73cb 100644
--- a/include/linux/mmc/sh_mmcif.h
+++ b/include/linux/mmc/sh_mmcif.h
@@ -44,6 +44,8 @@
struct sh_mmcif_dma *dma; /* Deprecated. Instead */
unsigned int slave_id_tx; /* use embedded slave_id_[tr]x */
unsigned int slave_id_rx;
+ bool use_cd_gpio : 1;
+ unsigned int cd_gpio;
u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */
unsigned long caps;
u32 ocr;
diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h
index e94e620..b65679f 100644
--- a/include/linux/mmc/sh_mobile_sdhi.h
+++ b/include/linux/mmc/sh_mobile_sdhi.h
@@ -23,6 +23,7 @@
int dma_slave_rx;
unsigned long tmio_flags;
unsigned long tmio_caps;
+ unsigned long tmio_caps2;
u32 tmio_ocr_mask; /* available MMC voltages */
unsigned int cd_gpio;
struct tmio_mmc_data *pdata;
diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h
new file mode 100644
index 0000000..7d88d27
--- /dev/null
+++ b/include/linux/mmc/slot-gpio.h
@@ -0,0 +1,24 @@
+/*
+ * Generic GPIO card-detect helper header
+ *
+ * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MMC_SLOT_GPIO_H
+#define MMC_SLOT_GPIO_H
+
+struct mmc_host;
+
+int mmc_gpio_get_ro(struct mmc_host *host);
+int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio);
+void mmc_gpio_free_ro(struct mmc_host *host);
+
+int mmc_gpio_get_cd(struct mmc_host *host);
+int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio);
+void mmc_gpio_free_cd(struct mmc_host *host);
+
+#endif
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 2427706..68c569f 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -694,7 +694,7 @@
range, including holes */
int node_id;
wait_queue_head_t kswapd_wait;
- struct task_struct *kswapd;
+ struct task_struct *kswapd; /* Protected by lock_memory_hotplug() */
int kswapd_max_order;
enum zone_type classzone_idx;
} pg_data_t;
diff --git a/arch/arm/mach-mxs/include/mach/mxsfb.h b/include/linux/mxsfb.h
similarity index 95%
rename from arch/arm/mach-mxs/include/mach/mxsfb.h
rename to include/linux/mxsfb.h
index e4d7979..f14943d 100644
--- a/arch/arm/mach-mxs/include/mach/mxsfb.h
+++ b/include/linux/mxsfb.h
@@ -14,8 +14,8 @@
* MA 02110-1301, USA.
*/
-#ifndef __MACH_FB_H
-#define __MACH_FB_H
+#ifndef __LINUX_MXSFB_H
+#define __LINUX_MXSFB_H
#include <linux/fb.h>
@@ -46,4 +46,4 @@
*/
};
-#endif /* __MACH_FB_H */
+#endif /* __LINUX_MXSFB_H */
diff --git a/include/linux/namei.h b/include/linux/namei.h
index ffc0213..d2ef8b3 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -7,12 +7,6 @@
struct vfsmount;
-struct open_intent {
- int flags;
- int create_mode;
- struct file *file;
-};
-
enum { MAX_NESTED_LINKS = 8 };
struct nameidata {
@@ -25,11 +19,6 @@
int last_type;
unsigned depth;
char *saved_names[MAX_NESTED_LINKS + 1];
-
- /* Intent data */
- union {
- struct open_intent open;
- } intent;
};
/*
@@ -78,13 +67,10 @@
extern struct dentry *kern_path_create(int, const char *, struct path *, int);
extern struct dentry *user_path_create(int, const char __user *, struct path *, int);
-extern int kern_path_parent(const char *, struct nameidata *);
+extern struct dentry *kern_path_locked(const char *, struct path *);
extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
const char *, unsigned int, struct path *);
-extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry,
- int (*open)(struct inode *, struct file *));
-
extern struct dentry *lookup_one_len(const char *, struct dentry *, int);
extern int follow_down_one(struct path *);
@@ -94,6 +80,8 @@
extern struct dentry *lock_rename(struct dentry *, struct dentry *);
extern void unlock_rename(struct dentry *, struct dentry *);
+extern void nd_jump_link(struct nameidata *nd, struct path *path);
+
static inline void nd_set_link(struct nameidata *nd, char *path)
{
nd->saved_names[nd->depth] = path;
diff --git a/include/linux/netfilter/xt_HMARK.h b/include/linux/netfilter/xt_HMARK.h
index abb1650..826fc58 100644
--- a/include/linux/netfilter/xt_HMARK.h
+++ b/include/linux/netfilter/xt_HMARK.h
@@ -27,7 +27,12 @@
__u16 src;
__u16 dst;
} p16;
+ struct {
+ __be16 src;
+ __be16 dst;
+ } b16;
__u32 v32;
+ __be32 b32;
};
struct xt_hmark_info {
diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h
index fbb78fb..f58325a 100644
--- a/include/linux/nfs_fs_sb.h
+++ b/include/linux/nfs_fs_sb.h
@@ -25,6 +25,7 @@
*/
struct nfs_client {
atomic_t cl_count;
+ atomic_t cl_mds_count;
int cl_cons_state; /* current construction state (-ve: init error) */
#define NFS_CS_READY 0 /* ready to be used */
#define NFS_CS_INITING 1 /* busy initialising */
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index d1a7bf5..d3b7c18 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -348,6 +348,7 @@
const struct qstr * name;
const struct nfs_server *server; /* Needed for ID mapping */
const u32 * bitmask;
+ const u32 * open_bitmap;
__u32 claim;
struct nfs4_sequence_args seq_args;
};
@@ -1236,6 +1237,7 @@
struct list_head rpc_list;
atomic_t refcnt;
struct nfs_page *req;
+ struct nfs_writeverf *verf;
struct pnfs_layout_segment *lseg;
loff_t io_start;
const struct rpc_call_ops *mds_ops;
@@ -1273,6 +1275,7 @@
struct nfs_write_header {
struct nfs_pgio_header header;
struct nfs_write_data rpc_data;
+ struct nfs_writeverf verf;
};
struct nfs_mds_commit_info {
@@ -1371,7 +1374,7 @@
int (*readlink)(struct inode *, struct page *, unsigned int,
unsigned int);
int (*create) (struct inode *, struct dentry *,
- struct iattr *, int, struct nfs_open_context *);
+ struct iattr *, int);
int (*remove) (struct inode *, struct qstr *);
void (*unlink_setup) (struct rpc_message *, struct inode *dir);
void (*unlink_rpc_prepare) (struct rpc_task *, struct nfs_unlinkdata *);
diff --git a/include/linux/of.h b/include/linux/of.h
index 2ec1083..b27c871 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -260,8 +260,7 @@
extern int prom_add_property(struct device_node* np, struct property* prop);
extern int prom_remove_property(struct device_node *np, struct property *prop);
extern int prom_update_property(struct device_node *np,
- struct property *newprop,
- struct property *oldprop);
+ struct property *newprop);
#if defined(CONFIG_OF_DYNAMIC)
/* For updating the device tree at runtime */
diff --git a/include/linux/pata_arasan_cf_data.h b/include/linux/pata_arasan_cf_data.h
index a6ee9aa..a7b4fc3 100644
--- a/include/linux/pata_arasan_cf_data.h
+++ b/include/linux/pata_arasan_cf_data.h
@@ -4,7 +4,7 @@
* Arasan Compact Flash host controller platform data header file
*
* Copyright (C) 2011 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index ab741b0..fc35260 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -517,6 +517,7 @@
#define PCI_DEVICE_ID_AMD_11H_NB_DRAM 0x1302
#define PCI_DEVICE_ID_AMD_11H_NB_MISC 0x1303
#define PCI_DEVICE_ID_AMD_11H_NB_LINK 0x1304
+#define PCI_DEVICE_ID_AMD_15H_M10H_F3 0x1403
#define PCI_DEVICE_ID_AMD_15H_NB_F0 0x1600
#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601
#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602
@@ -2755,6 +2756,17 @@
#define PCI_DEVICE_ID_INTEL_IOAT_SNB7 0x3c27
#define PCI_DEVICE_ID_INTEL_IOAT_SNB8 0x3c2e
#define PCI_DEVICE_ID_INTEL_IOAT_SNB9 0x3c2f
+#define PCI_DEVICE_ID_INTEL_UNC_HA 0x3c46
+#define PCI_DEVICE_ID_INTEL_UNC_IMC0 0x3cb0
+#define PCI_DEVICE_ID_INTEL_UNC_IMC1 0x3cb1
+#define PCI_DEVICE_ID_INTEL_UNC_IMC2 0x3cb4
+#define PCI_DEVICE_ID_INTEL_UNC_IMC3 0x3cb5
+#define PCI_DEVICE_ID_INTEL_UNC_QPI0 0x3c41
+#define PCI_DEVICE_ID_INTEL_UNC_QPI1 0x3c42
+#define PCI_DEVICE_ID_INTEL_UNC_R2PCIE 0x3c43
+#define PCI_DEVICE_ID_INTEL_UNC_R3QPI0 0x3c44
+#define PCI_DEVICE_ID_INTEL_UNC_R3QPI1 0x3c45
+#define PCI_DEVICE_ID_INTEL_JAKETOWN_UBOX 0x3ce0
#define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f
#define PCI_DEVICE_ID_INTEL_5100_16 0x65f0
#define PCI_DEVICE_ID_INTEL_5100_21 0x65f5
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 45db49f..76c5c8b 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -677,6 +677,7 @@
u64 last_tag;
unsigned long config_base;
unsigned long event_base;
+ int event_base_rdpmc;
int idx;
int last_cpu;
@@ -1106,6 +1107,8 @@
struct task_struct *task,
perf_overflow_handler_t callback,
void *context);
+extern void perf_pmu_migrate_context(struct pmu *pmu,
+ int src_cpu, int dst_cpu);
extern u64 perf_event_read_value(struct perf_event *event,
u64 *enabled, u64 *running);
diff --git a/include/linux/platform_data/clk-nomadik.h b/include/linux/platform_data/clk-nomadik.h
new file mode 100644
index 0000000..5713c87
--- /dev/null
+++ b/include/linux/platform_data/clk-nomadik.h
@@ -0,0 +1,2 @@
+/* Minimal platform data header */
+void nomadik_clk_init(void);
diff --git a/drivers/staging/omapdrm/omap_priv.h b/include/linux/platform_data/omap_drm.h
similarity index 80%
rename from drivers/staging/omapdrm/omap_priv.h
rename to include/linux/platform_data/omap_drm.h
index ef64414..3da73bdc 100644
--- a/drivers/staging/omapdrm/omap_priv.h
+++ b/include/linux/platform_data/omap_drm.h
@@ -1,8 +1,8 @@
/*
- * include/drm/omap_priv.h
+ * DRM/KMS platform data for TI OMAP platforms
*
- * Copyright (C) 2011 Texas Instruments
- * Author: Rob Clark <rob@ti.com>
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
@@ -17,13 +17,11 @@
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef __OMAP_PRIV_H__
-#define __OMAP_PRIV_H__
+#ifndef __PLATFORM_DATA_OMAP_DRM_H__
+#define __PLATFORM_DATA_OMAP_DRM_H__
-/* Non-userspace facing APIs
- */
-
-/* optional platform data to configure the default configuration of which
+/*
+ * Optional platform data to configure the default configuration of which
* pipes/overlays/CRTCs are used.. if this is not provided, then instead the
* first CONFIG_DRM_OMAP_NUM_CRTCS are used, and they are each connected to
* one manager, with priority given to managers that are connected to
@@ -49,7 +47,6 @@
struct omap_drm_platform_data {
struct omap_kms_platform_data *kms_pdata;
- struct omap_dmm_platform_data *dmm_pdata;
};
-#endif /* __OMAP_DRM_H__ */
+#endif /* __PLATFORM_DATA_OMAP_DRM_H__ */
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index 30f794e..a7d6172 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -15,6 +15,7 @@
#include <linux/err.h>
#include <linux/of.h>
#include <linux/notifier.h>
+#include <linux/cpuidle.h>
enum gpd_status {
GPD_STATE_ACTIVE = 0, /* PM domain is active */
@@ -45,6 +46,11 @@
bool (*active_wakeup)(struct device *dev);
};
+struct gpd_cpu_data {
+ unsigned int saved_exit_latency;
+ struct cpuidle_state *idle_state;
+};
+
struct generic_pm_domain {
struct dev_pm_domain domain; /* PM domain operations */
struct list_head gpd_list_node; /* Node in the global PM domains list */
@@ -75,6 +81,7 @@
bool max_off_time_changed;
bool cached_power_down_ok;
struct device_node *of_node; /* Node in device tree */
+ struct gpd_cpu_data *cpu_data;
};
static inline struct generic_pm_domain *pd_to_genpd(struct dev_pm_domain *pd)
@@ -105,6 +112,7 @@
struct gpd_timing_data td;
struct notifier_block nb;
struct mutex lock;
+ unsigned int refcount;
bool need_restore;
bool always_on;
};
@@ -155,6 +163,8 @@
struct gpd_dev_ops *ops,
struct gpd_timing_data *td);
extern int __pm_genpd_remove_callbacks(struct device *dev, bool clear_td);
+extern int genpd_attach_cpuidle(struct generic_pm_domain *genpd, int state);
+extern int genpd_detach_cpuidle(struct generic_pm_domain *genpd);
extern void pm_genpd_init(struct generic_pm_domain *genpd,
struct dev_power_governor *gov, bool is_off);
@@ -211,6 +221,14 @@
{
return -ENOSYS;
}
+static inline int genpd_attach_cpuidle(struct generic_pm_domain *genpd, int st)
+{
+ return -ENOSYS;
+}
+static inline int genpd_detach_cpuidle(struct generic_pm_domain *genpd)
+{
+ return -ENOSYS;
+}
static inline void pm_genpd_init(struct generic_pm_domain *genpd,
struct dev_power_governor *gov, bool is_off)
{
diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h
index 233149c..9924ea1 100644
--- a/include/linux/pm_qos.h
+++ b/include/linux/pm_qos.h
@@ -66,7 +66,7 @@
static inline int dev_pm_qos_request_active(struct dev_pm_qos_request *req)
{
- return req->dev != 0;
+ return req->dev != NULL;
}
int pm_qos_update_target(struct pm_qos_constraints *c, struct plist_node *node,
diff --git a/arch/arm/mach-omap2/smartreflex.h b/include/linux/power/smartreflex.h
similarity index 79%
rename from arch/arm/mach-omap2/smartreflex.h
rename to include/linux/power/smartreflex.h
index 5809141..3101e62 100644
--- a/arch/arm/mach-omap2/smartreflex.h
+++ b/include/linux/power/smartreflex.h
@@ -17,12 +17,13 @@
* published by the Free Software Foundation.
*/
-#ifndef __ASM_ARM_OMAP_SMARTREFLEX_H
-#define __ASM_ARM_OMAP_SMARTREFLEX_H
+#ifndef __POWER_SMARTREFLEX_H
+#define __POWER_SMARTREFLEX_H
+#include <linux/types.h>
#include <linux/platform_device.h>
-
-#include "voltage.h"
+#include <linux/delay.h>
+#include <plat/voltage.h>
/*
* Different Smartreflex IPs version. The v1 is the 65nm version used in
@@ -142,6 +143,51 @@
#define OMAP3430_SR_ERRWEIGHT 0x04
#define OMAP3430_SR_ERRMAXLIMIT 0x02
+struct omap_sr {
+ char *name;
+ struct list_head node;
+ struct platform_device *pdev;
+ struct omap_sr_nvalue_table *nvalue_table;
+ struct voltagedomain *voltdm;
+ struct dentry *dbg_dir;
+ unsigned int irq;
+ int srid;
+ int ip_type;
+ int nvalue_count;
+ bool autocomp_active;
+ u32 clk_length;
+ u32 err_weight;
+ u32 err_minlimit;
+ u32 err_maxlimit;
+ u32 accum_data;
+ u32 senn_avgweight;
+ u32 senp_avgweight;
+ u32 senp_mod;
+ u32 senn_mod;
+ void __iomem *base;
+};
+
+/**
+ * test_cond_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed. To use, define some integer @index in the
+ * calling code. After running, if @index == @timeout, then the loop has
+ * timed out.
+ *
+ * Copied from omap_test_timeout */
+#define sr_test_cond_timeout(cond, timeout, index) \
+({ \
+ for (index = 0; index < timeout; index++) { \
+ if (cond) \
+ break; \
+ udelay(1); \
+ } \
+})
+
/**
* struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
* pmic specific info to smartreflex driver
@@ -161,7 +207,7 @@
const char *sensor_voltdm_name;
};
-#ifdef CONFIG_OMAP_SMARTREFLEX
+#ifdef CONFIG_POWER_AVS_OMAP
/*
* The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
* The smartreflex class driver should pass the class type.
@@ -186,10 +232,10 @@
* based decisions.
*/
struct omap_sr_class_data {
- int (*enable)(struct voltagedomain *voltdm);
- int (*disable)(struct voltagedomain *voltdm, int is_volt_reset);
- int (*configure)(struct voltagedomain *voltdm);
- int (*notify)(struct voltagedomain *voltdm, u32 status);
+ int (*enable)(struct omap_sr *sr);
+ int (*disable)(struct omap_sr *sr, int is_volt_reset);
+ int (*configure)(struct omap_sr *sr);
+ int (*notify)(struct omap_sr *sr, u32 status);
u8 notify_flags;
u8 class_type;
};
@@ -197,17 +243,22 @@
/**
* struct omap_sr_nvalue_table - Smartreflex n-target value info
*
- * @efuse_offs: The offset of the efuse where n-target values are stored.
- * @nvalue: The n-target value.
+ * @efuse_offs: The offset of the efuse where n-target values are stored.
+ * @nvalue: The n-target value.
+ * @errminlimit: The value of the ERRMINLIMIT bitfield for this n-target
+ * @volt_nominal: microvolts DC that the VDD is initially programmed to
*/
struct omap_sr_nvalue_table {
u32 efuse_offs;
u32 nvalue;
+ u32 errminlimit;
+ unsigned long volt_nominal;
};
/**
* struct omap_sr_data - Smartreflex platform data.
*
+ * @name: instance name
* @ip_type: Smartreflex IP type.
* @senp_mod: SENPENABLE value for the sr
* @senn_mod: SENNENABLE value for sr
@@ -219,6 +270,7 @@
* @voltdm: Pointer to the voltage domain associated with the SR
*/
struct omap_sr_data {
+ const char *name;
int ip_type;
u32 senp_mod;
u32 senn_mod;
diff --git a/include/linux/prctl.h b/include/linux/prctl.h
index 3988012..289760f 100644
--- a/include/linux/prctl.h
+++ b/include/linux/prctl.h
@@ -141,6 +141,8 @@
* Changing LSM security domain is considered a new privilege. So, for example,
* asking selinux for a specific new context (e.g. with runcon) will result
* in execve returning -EPERM.
+ *
+ * See Documentation/prctl/no_new_privs.txt for more details.
*/
#define PR_SET_NO_NEW_PRIVS 38
#define PR_GET_NO_NEW_PRIVS 39
diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h
index 7ed7fd4..3b823d4 100644
--- a/include/linux/pstore_ram.h
+++ b/include/linux/pstore_ram.h
@@ -69,12 +69,14 @@
size_t size,
bool ecc);
void persistent_ram_free(struct persistent_ram_zone *prz);
+void persistent_ram_zap(struct persistent_ram_zone *prz);
struct persistent_ram_zone *persistent_ram_init_ringbuffer(struct device *dev,
bool ecc);
int persistent_ram_write(struct persistent_ram_zone *prz, const void *s,
unsigned int count);
+void persistent_ram_save_old(struct persistent_ram_zone *prz);
size_t persistent_ram_old_size(struct persistent_ram_zone *prz);
void *persistent_ram_old(struct persistent_ram_zone *prz);
void persistent_ram_free_old(struct persistent_ram_zone *prz);
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 44835fb..f366320 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -160,7 +160,9 @@
PXA25x_SSP, /* pxa 210, 250, 255, 26x */
PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
PXA27x_SSP,
+ PXA3xx_SSP,
PXA168_SSP,
+ PXA910_SSP,
CE4100_SSP,
};
diff --git a/include/linux/quota.h b/include/linux/quota.h
index c09fa04..524ede8 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -333,7 +333,7 @@
int (*quota_on)(struct super_block *, int, int, struct path *);
int (*quota_on_meta)(struct super_block *, int, int);
int (*quota_off)(struct super_block *, int);
- int (*quota_sync)(struct super_block *, int, int);
+ int (*quota_sync)(struct super_block *, int);
int (*get_info)(struct super_block *, int, struct if_dqinfo *);
int (*set_info)(struct super_block *, int, struct if_dqinfo *);
int (*get_dqblk)(struct super_block *, int, qid_t, struct fs_disk_quota *);
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 17b9773..ec6b65f 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -83,7 +83,8 @@
int dquot_quota_on_mount(struct super_block *sb, char *qf_name,
int format_id, int type);
int dquot_quota_off(struct super_block *sb, int type);
-int dquot_quota_sync(struct super_block *sb, int type, int wait);
+int dquot_writeback_dquots(struct super_block *sb, int type);
+int dquot_quota_sync(struct super_block *sb, int type);
int dquot_get_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
int dquot_set_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
int dquot_get_dqblk(struct super_block *sb, int type, qid_t id,
@@ -255,6 +256,11 @@
#define dquot_file_open generic_file_open
+static inline int dquot_writeback_dquots(struct super_block *sb, int type)
+{
+ return 0;
+}
+
#endif /* CONFIG_QUOTA */
static inline int dquot_alloc_space_nodirty(struct inode *inode, qsize_t nr)
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 26d1a47..115ead2 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -147,6 +147,7 @@
extern void __rcu_read_lock(void);
extern void __rcu_read_unlock(void);
+extern void rcu_read_unlock_special(struct task_struct *t);
void synchronize_rcu(void);
/*
@@ -184,7 +185,6 @@
/* Internal to kernel */
extern void rcu_sched_qs(int cpu);
extern void rcu_bh_qs(int cpu);
-extern void rcu_preempt_note_context_switch(void);
extern void rcu_check_callbacks(int cpu, int user);
struct notifier_block;
extern void rcu_idle_enter(void);
@@ -256,6 +256,10 @@
}
#endif /* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
+#if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SMP)
+extern int rcu_is_cpu_idle(void);
+#endif /* #if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SMP) */
+
#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU)
bool rcu_lockdep_current_cpu_online(void);
#else /* #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU) */
@@ -267,15 +271,6 @@
#ifdef CONFIG_DEBUG_LOCK_ALLOC
-#ifdef CONFIG_PROVE_RCU
-extern int rcu_is_cpu_idle(void);
-#else /* !CONFIG_PROVE_RCU */
-static inline int rcu_is_cpu_idle(void)
-{
- return 0;
-}
-#endif /* else !CONFIG_PROVE_RCU */
-
static inline void rcu_lock_acquire(struct lockdep_map *map)
{
lock_acquire(map, 0, 0, 2, 1, NULL, _THIS_IP_);
@@ -432,8 +427,7 @@
static inline void rcu_preempt_sleep_check(void)
{
rcu_lockdep_assert(!lock_is_held(&rcu_lock_map),
- "Illegal context switch in RCU read-side "
- "critical section");
+ "Illegal context switch in RCU read-side critical section");
}
#else /* #ifdef CONFIG_PROVE_RCU */
static inline void rcu_preempt_sleep_check(void)
@@ -514,10 +508,10 @@
(_________p1); \
})
#define __rcu_assign_pointer(p, v, space) \
- ({ \
+ do { \
smp_wmb(); \
(p) = (typeof(*v) __force space *)(v); \
- })
+ } while (0)
/**
@@ -852,7 +846,7 @@
*
* Assigns the specified value to the specified RCU-protected
* pointer, ensuring that any concurrent RCU readers will see
- * any prior initialization. Returns the value assigned.
+ * any prior initialization.
*
* Inserts memory barriers on architectures that require them
* (which is most of them), and also prevents the compiler from
@@ -904,25 +898,17 @@
* the reader-accessible portions of the linked structure.
*/
#define RCU_INIT_POINTER(p, v) \
- p = (typeof(*v) __force __rcu *)(v)
+ do { \
+ p = (typeof(*v) __force __rcu *)(v); \
+ } while (0)
-static __always_inline bool __is_kfree_rcu_offset(unsigned long offset)
-{
- return offset < 4096;
-}
-
-static __always_inline
-void __kfree_rcu(struct rcu_head *head, unsigned long offset)
-{
- typedef void (*rcu_callback)(struct rcu_head *);
-
- BUILD_BUG_ON(!__builtin_constant_p(offset));
-
- /* See the kfree_rcu() header comment. */
- BUILD_BUG_ON(!__is_kfree_rcu_offset(offset));
-
- kfree_call_rcu(head, (rcu_callback)offset);
-}
+/**
+ * RCU_POINTER_INITIALIZER() - statically initialize an RCU protected pointer
+ *
+ * GCC-style initialization for an RCU-protected pointer in a structure field.
+ */
+#define RCU_POINTER_INITIALIZER(p, v) \
+ .p = (typeof(*v) __force __rcu *)(v)
/*
* Does the specified offset indicate that the corresponding rcu_head
@@ -936,7 +922,7 @@
#define __kfree_rcu(head, offset) \
do { \
BUILD_BUG_ON(!__is_kfree_rcu_offset(offset)); \
- call_rcu(head, (void (*)(struct rcu_head *))(unsigned long)(offset)); \
+ kfree_call_rcu(head, (void (*)(struct rcu_head *))(unsigned long)(offset)); \
} while (0)
/**
diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h
index adb5e5a..4e56a9c 100644
--- a/include/linux/rcutiny.h
+++ b/include/linux/rcutiny.h
@@ -87,17 +87,24 @@
#ifdef CONFIG_TINY_RCU
-static inline int rcu_needs_cpu(int cpu)
+static inline void rcu_preempt_note_context_switch(void)
{
+}
+
+static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
+{
+ *delta_jiffies = ULONG_MAX;
return 0;
}
#else /* #ifdef CONFIG_TINY_RCU */
+void rcu_preempt_note_context_switch(void);
int rcu_preempt_needs_cpu(void);
-static inline int rcu_needs_cpu(int cpu)
+static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
{
+ *delta_jiffies = ULONG_MAX;
return rcu_preempt_needs_cpu();
}
@@ -106,6 +113,7 @@
static inline void rcu_note_context_switch(int cpu)
{
rcu_sched_qs(cpu);
+ rcu_preempt_note_context_switch();
}
/*
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 3c6083c..952b793 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -32,7 +32,7 @@
extern void rcu_init(void);
extern void rcu_note_context_switch(int cpu);
-extern int rcu_needs_cpu(int cpu);
+extern int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies);
extern void rcu_cpu_stall_reset(void);
/*
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 56af22e..7f7e00d 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -14,12 +14,14 @@
*/
#include <linux/list.h>
+#include <linux/rbtree.h>
struct module;
struct device;
struct i2c_client;
struct spi_device;
struct regmap;
+struct regmap_range_cfg;
/* An enum of all the supported cache types */
enum regcache_type {
@@ -43,6 +45,14 @@
#ifdef CONFIG_REGMAP
+enum regmap_endian {
+ /* Unspecified -> 0 -> Backwards compatible default */
+ REGMAP_ENDIAN_DEFAULT = 0,
+ REGMAP_ENDIAN_BIG,
+ REGMAP_ENDIAN_LITTLE,
+ REGMAP_ENDIAN_NATIVE,
+};
+
/**
* Configuration for the register map of a device.
*
@@ -84,6 +94,15 @@
* @reg_defaults_raw: Power on reset values for registers (for use with
* register cache support).
* @num_reg_defaults_raw: Number of elements in reg_defaults_raw.
+ * @reg_format_endian: Endianness for formatted register addresses. If this is
+ * DEFAULT, the @reg_format_endian_default value from the
+ * regmap bus is used.
+ * @val_format_endian: Endianness for formatted register values. If this is
+ * DEFAULT, the @reg_format_endian_default value from the
+ * regmap bus is used.
+ *
+ * @ranges: Array of configuration entries for virtual address ranges.
+ * @num_ranges: Number of range configuration entries.
*/
struct regmap_config {
const char *name;
@@ -109,6 +128,43 @@
u8 write_flag_mask;
bool use_single_rw;
+
+ enum regmap_endian reg_format_endian;
+ enum regmap_endian val_format_endian;
+
+ const struct regmap_range_cfg *ranges;
+ unsigned int n_ranges;
+};
+
+/**
+ * Configuration for indirectly accessed or paged registers.
+ * Registers, mapped to this virtual range, are accessed in two steps:
+ * 1. page selector register update;
+ * 2. access through data window registers.
+ *
+ * @range_min: Address of the lowest register address in virtual range.
+ * @range_max: Address of the highest register in virtual range.
+ *
+ * @page_sel_reg: Register with selector field.
+ * @page_sel_mask: Bit shift for selector value.
+ * @page_sel_shift: Bit mask for selector value.
+ *
+ * @window_start: Address of first (lowest) register in data window.
+ * @window_len: Number of registers in data window.
+ */
+struct regmap_range_cfg {
+ /* Registers of virtual address range */
+ unsigned int range_min;
+ unsigned int range_max;
+
+ /* Page selector for indirect addressing */
+ unsigned int selector_reg;
+ unsigned int selector_mask;
+ int selector_shift;
+
+ /* Data window (per each page) */
+ unsigned int window_start;
+ unsigned int window_len;
};
typedef int (*regmap_hw_write)(void *context, const void *data,
@@ -133,6 +189,12 @@
* data.
* @read_flag_mask: Mask to be set in the top byte of the register when doing
* a read.
+ * @reg_format_endian_default: Default endianness for formatted register
+ * addresses. Used when the regmap_config specifies DEFAULT. If this is
+ * DEFAULT, BIG is assumed.
+ * @val_format_endian_default: Default endianness for formatted register
+ * values. Used when the regmap_config specifies DEFAULT. If this is
+ * DEFAULT, BIG is assumed.
*/
struct regmap_bus {
bool fast_io;
@@ -141,6 +203,8 @@
regmap_hw_read read;
regmap_hw_free_context free_context;
u8 read_flag_mask;
+ enum regmap_endian reg_format_endian_default;
+ enum regmap_endian val_format_endian_default;
};
struct regmap *regmap_init(struct device *dev,
@@ -219,6 +283,7 @@
* @status_base: Base status register address.
* @mask_base: Base mask register address.
* @ack_base: Base ack address. If zero then the chip is clear on read.
+ * @wake_base: Base address for wake enables. If zero unsupported.
* @irq_reg_stride: Stride to use for chips where registers are not contiguous.
*
* @num_regs: Number of registers in each control bank.
@@ -232,6 +297,7 @@
unsigned int status_base;
unsigned int mask_base;
unsigned int ack_base;
+ unsigned int wake_base;
unsigned int irq_reg_stride;
int num_regs;
@@ -243,7 +309,7 @@
struct regmap_irq_chip_data;
int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
- int irq_base, struct regmap_irq_chip *chip,
+ int irq_base, const struct regmap_irq_chip *chip,
struct regmap_irq_chip_data **data);
void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data);
int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data);
@@ -361,7 +427,6 @@
static inline struct regmap *dev_get_regmap(struct device *dev,
const char *name)
{
- WARN_ONCE(1, "regmap API is disabled");
return NULL;
}
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 4ed1b30..da339fd 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -291,6 +291,12 @@
static inline int regulator_get_voltage(struct regulator *regulator)
{
+ return -EINVAL;
+}
+
+static inline int regulator_is_supported_voltage(struct regulator *regulator,
+ int min_uV, int max_uV)
+{
return 0;
}
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index b0432cc..bac4c87 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -32,6 +32,8 @@
REGULATOR_STATUS_NORMAL,
REGULATOR_STATUS_IDLE,
REGULATOR_STATUS_STANDBY,
+ /* in case that any other status doesn't apply */
+ REGULATOR_STATUS_UNDEFINED,
};
/**
@@ -67,6 +69,8 @@
*
* @enable_time: Time taken for the regulator voltage output voltage to
* stabilise after being enabled, in microseconds.
+ * @set_ramp_delay: Set the ramp delay for the regulator. The driver should
+ * select ramp delay equal to or less than(closest) ramp_delay.
* @set_voltage_time_sel: Time taken for the regulator voltage output voltage
* to stabilise after being set to a new value, in microseconds.
* The function provides the from and to voltage selector, the
@@ -113,6 +117,7 @@
/* Time taken to enable or set voltage on the regulator */
int (*enable_time) (struct regulator_dev *);
+ int (*set_ramp_delay) (struct regulator_dev *, int ramp_delay);
int (*set_voltage_time_sel) (struct regulator_dev *,
unsigned int old_selector,
unsigned int new_selector);
@@ -170,11 +175,15 @@
*
* @min_uV: Voltage given by the lowest selector (if linear mapping)
* @uV_step: Voltage increase with each selector (if linear mapping)
+ * @ramp_delay: Time to settle down after voltage change (unit: uV/us)
+ * @volt_table: Voltage mapping table (if table based mapping)
*
* @vsel_reg: Register for selector when using regulator_regmap_X_voltage_
* @vsel_mask: Mask for register bitfield used for selector
* @enable_reg: Register for control when using regmap enable/disable ops
* @enable_mask: Mask for control when using regmap enable/disable ops
+ *
+ * @enable_time: Time taken for initial enable of regulator (in uS).
*/
struct regulator_desc {
const char *name;
@@ -188,11 +197,16 @@
unsigned int min_uV;
unsigned int uV_step;
+ unsigned int ramp_delay;
+
+ const unsigned int *volt_table;
unsigned int vsel_reg;
unsigned int vsel_mask;
unsigned int enable_reg;
unsigned int enable_mask;
+
+ unsigned int enable_time;
};
/**
@@ -208,6 +222,9 @@
* @of_node: OpenFirmware node to parse for device tree bindings (may be
* NULL).
* @regmap: regmap to use for core regmap helpers
+ * @ena_gpio: GPIO controlling regulator enable.
+ * @ena_gpio_invert: Sense for GPIO enable control.
+ * @ena_gpio_flags: Flags to use when calling gpio_request_one()
*/
struct regulator_config {
struct device *dev;
@@ -215,6 +232,10 @@
void *driver_data;
struct device_node *of_node;
struct regmap *regmap;
+
+ int ena_gpio;
+ unsigned int ena_gpio_invert:1;
+ unsigned int ena_gpio_flags;
};
/*
@@ -253,6 +274,10 @@
void *reg_data; /* regulator_dev data */
struct dentry *debugfs;
+
+ int ena_gpio;
+ unsigned int ena_gpio_invert:1;
+ unsigned int ena_gpio_state:1;
};
struct regulator_dev *
@@ -271,6 +296,8 @@
int regulator_list_voltage_linear(struct regulator_dev *rdev,
unsigned int selector);
+int regulator_list_voltage_table(struct regulator_dev *rdev,
+ unsigned int selector);
int regulator_map_voltage_linear(struct regulator_dev *rdev,
int min_uV, int max_uV);
int regulator_map_voltage_iterate(struct regulator_dev *rdev,
@@ -280,6 +307,9 @@
int regulator_is_enabled_regmap(struct regulator_dev *rdev);
int regulator_enable_regmap(struct regulator_dev *rdev);
int regulator_disable_regmap(struct regulator_dev *rdev);
+int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
+ unsigned int old_selector,
+ unsigned int new_selector);
void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
index f83f744..48918be 100644
--- a/include/linux/regulator/fixed.h
+++ b/include/linux/regulator/fixed.h
@@ -22,6 +22,7 @@
/**
* struct fixed_voltage_config - fixed_voltage_config structure
* @supply_name: Name of the regulator supply
+ * @input_supply: Name of the input regulator supply
* @microvolts: Output voltage of regulator
* @gpio: GPIO to use for enable control
* set to -EINVAL if not used
@@ -46,6 +47,7 @@
*/
struct fixed_voltage_config {
const char *supply_name;
+ const char *input_supply;
int microvolts;
int gpio;
unsigned startup_delay;
@@ -58,14 +60,17 @@
struct regulator_consumer_supply;
#if IS_ENABLED(CONFIG_REGULATOR)
-struct platform_device *regulator_register_fixed(int id,
- struct regulator_consumer_supply *supplies, int num_supplies);
+struct platform_device *regulator_register_always_on(int id, const char *name,
+ struct regulator_consumer_supply *supplies, int num_supplies, int uv);
#else
-static inline struct platform_device *regulator_register_fixed(int id,
- struct regulator_consumer_supply *supplies, int num_supplies)
+static inline struct platform_device *regulator_register_always_on(int id, const char *name,
+ struct regulator_consumer_supply *supplies, int num_supplies, int uv)
{
return NULL;
}
#endif
+#define regulator_register_fixed(id, s, ns) regulator_register_always_on(id, \
+ "fixed-dummy", s, ns, 0)
+
#endif
diff --git a/include/linux/regulator/lp872x.h b/include/linux/regulator/lp872x.h
new file mode 100644
index 0000000..132e05c
--- /dev/null
+++ b/include/linux/regulator/lp872x.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __LP872X_REGULATOR_H__
+#define __LP872X_REGULATOR_H__
+
+#include <linux/regulator/machine.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#define LP872X_MAX_REGULATORS 9
+
+enum lp872x_regulator_id {
+ LP8720_ID_BASE,
+ LP8720_ID_LDO1 = LP8720_ID_BASE,
+ LP8720_ID_LDO2,
+ LP8720_ID_LDO3,
+ LP8720_ID_LDO4,
+ LP8720_ID_LDO5,
+ LP8720_ID_BUCK,
+
+ LP8725_ID_BASE,
+ LP8725_ID_LDO1 = LP8725_ID_BASE,
+ LP8725_ID_LDO2,
+ LP8725_ID_LDO3,
+ LP8725_ID_LDO4,
+ LP8725_ID_LDO5,
+ LP8725_ID_LILO1,
+ LP8725_ID_LILO2,
+ LP8725_ID_BUCK1,
+ LP8725_ID_BUCK2,
+
+ LP872X_ID_MAX,
+};
+
+enum lp872x_dvs_state {
+ DVS_LOW = GPIOF_OUT_INIT_LOW,
+ DVS_HIGH = GPIOF_OUT_INIT_HIGH,
+};
+
+enum lp872x_dvs_sel {
+ SEL_V1,
+ SEL_V2,
+};
+
+/**
+ * lp872x_dvs
+ * @gpio : gpio pin number for dvs control
+ * @vsel : dvs selector for buck v1 or buck v2 register
+ * @init_state : initial dvs pin state
+ */
+struct lp872x_dvs {
+ int gpio;
+ enum lp872x_dvs_sel vsel;
+ enum lp872x_dvs_state init_state;
+};
+
+/**
+ * lp872x_regdata
+ * @id : regulator id
+ * @init_data : init data for each regulator
+ */
+struct lp872x_regulator_data {
+ enum lp872x_regulator_id id;
+ struct regulator_init_data *init_data;
+};
+
+/**
+ * lp872x_platform_data
+ * @general_config : the value of LP872X_GENERAL_CFG register
+ * @update_config : if LP872X_GENERAL_CFG register is updated, set true
+ * @regulator_data : platform regulator id and init data
+ * @dvs : dvs data for buck voltage control
+ */
+struct lp872x_platform_data {
+ u8 general_config;
+ bool update_config;
+ struct lp872x_regulator_data regulator_data[LP872X_MAX_REGULATORS];
+ struct lp872x_dvs *dvs;
+};
+
+#endif
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index b021084..40dd0a3 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -92,6 +92,7 @@
* mode.
* @initial_state: Suspend state to set by default.
* @initial_mode: Mode to set at startup.
+ * @ramp_delay: Time to settle down after voltage change (unit: uV/us)
*/
struct regulation_constraints {
@@ -125,6 +126,8 @@
/* mode to set on startup */
unsigned int initial_mode;
+ unsigned int ramp_delay;
+
/* constraint flags */
unsigned always_on:1; /* regulator never off when system is on */
unsigned boot_on:1; /* bootloader/firmware enabled regulator */
diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h
index a8e50e4..82a6739 100644
--- a/include/linux/rpmsg.h
+++ b/include/linux/rpmsg.h
@@ -38,6 +38,8 @@
#include <linux/types.h>
#include <linux/device.h>
#include <linux/mod_devicetable.h>
+#include <linux/kref.h>
+#include <linux/mutex.h>
/* The feature bitmap for virtio rpmsg */
#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */
@@ -120,7 +122,9 @@
/**
* struct rpmsg_endpoint - binds a local rpmsg address to its user
* @rpdev: rpmsg channel device
+ * @refcount: when this drops to zero, the ept is deallocated
* @cb: rx callback handler
+ * @cb_lock: must be taken before accessing/changing @cb
* @addr: local rpmsg address
* @priv: private data for the driver's use
*
@@ -140,7 +144,9 @@
*/
struct rpmsg_endpoint {
struct rpmsg_channel *rpdev;
+ struct kref refcount;
rpmsg_rx_cb_t cb;
+ struct mutex cb_lock;
u32 addr;
void *priv;
};
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 4059c0f..1a2ebd3 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1405,7 +1405,7 @@
int (*notifier)(void *priv);
void *notifier_data;
sigset_t *notifier_mask;
- struct hlist_head task_works;
+ struct callback_head *task_works;
struct audit_context *audit_context;
#ifdef CONFIG_AUDITSYSCALL
@@ -1546,7 +1546,6 @@
unsigned long timer_slack_ns;
unsigned long default_timer_slack_ns;
- struct list_head *scm_work_list;
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/* Index of current stored address in ret_stack */
int curr_ret_stack;
@@ -1581,7 +1580,6 @@
#endif
#ifdef CONFIG_UPROBES
struct uprobe_task *utask;
- int uprobe_srcu_id;
#endif
};
@@ -1871,22 +1869,12 @@
INIT_LIST_HEAD(&p->rcu_node_entry);
}
-static inline void rcu_switch_from(struct task_struct *prev)
-{
- if (prev->rcu_read_lock_nesting != 0)
- rcu_preempt_note_context_switch();
-}
-
#else
static inline void rcu_copy_process(struct task_struct *p)
{
}
-static inline void rcu_switch_from(struct task_struct *prev)
-{
-}
-
#endif
#ifdef CONFIG_SMP
@@ -1909,6 +1897,14 @@
}
#endif
+#ifdef CONFIG_NO_HZ
+void calc_load_enter_idle(void);
+void calc_load_exit_idle(void);
+#else
+static inline void calc_load_enter_idle(void) { }
+static inline void calc_load_exit_idle(void) { }
+#endif /* CONFIG_NO_HZ */
+
#ifndef CONFIG_CPUMASK_OFFSTACK
static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
{
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index c513b73..5091091 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -18,7 +18,6 @@
struct kref ref;
};
-
struct sh_clk_ops {
#ifdef CONFIG_SH_CLK_CPG_LEGACY
void (*init)(struct clk *clk);
@@ -31,6 +30,10 @@
long (*round_rate)(struct clk *clk, unsigned long rate);
};
+#define SH_CLK_DIV_MSK(div) ((1 << (div)) - 1)
+#define SH_CLK_DIV4_MSK SH_CLK_DIV_MSK(4)
+#define SH_CLK_DIV6_MSK SH_CLK_DIV_MSK(6)
+
struct clk {
struct list_head node;
struct clk *parent;
@@ -52,6 +55,7 @@
unsigned int enable_bit;
void __iomem *mapped_reg;
+ unsigned int div_mask;
unsigned long arch_flags;
void *priv;
struct clk_mapping *mapping;
@@ -65,6 +69,8 @@
#define CLK_ENABLE_REG_16BIT BIT(2)
#define CLK_ENABLE_REG_8BIT BIT(3)
+#define CLK_MASK_DIV_ON_DISABLE BIT(4)
+
#define CLK_ENABLE_REG_MASK (CLK_ENABLE_REG_32BIT | \
CLK_ENABLE_REG_16BIT | \
CLK_ENABLE_REG_8BIT)
@@ -146,14 +152,17 @@
.enable_reg = (void __iomem *)_reg, \
.enable_bit = _shift, \
.arch_flags = _div_bitmap, \
+ .div_mask = SH_CLK_DIV4_MSK, \
.flags = _flags, \
}
-struct clk_div4_table {
+struct clk_div_table {
struct clk_div_mult_table *div_mult_table;
void (*kick)(struct clk *clk);
};
+#define clk_div4_table clk_div_table
+
int sh_clk_div4_register(struct clk *clks, int nr,
struct clk_div4_table *table);
int sh_clk_div4_enable_register(struct clk *clks, int nr,
@@ -165,7 +174,9 @@
_num_parents, _src_shift, _src_width) \
{ \
.enable_reg = (void __iomem *)_reg, \
- .flags = _flags, \
+ .enable_bit = 0, /* unused */ \
+ .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \
+ .div_mask = SH_CLK_DIV6_MSK, \
.parent_table = _parents, \
.parent_num = _num_parents, \
.src_shift = _src_shift, \
@@ -176,7 +187,9 @@
{ \
.parent = _parent, \
.enable_reg = (void __iomem *)_reg, \
- .flags = _flags, \
+ .enable_bit = 0, /* unused */ \
+ .div_mask = SH_CLK_DIV6_MSK, \
+ .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \
}
int sh_clk_div6_register(struct clk *clks, int nr);
diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h
index 5c15aed..c19a092 100644
--- a/include/linux/sh_pfc.h
+++ b/include/linux/sh_pfc.h
@@ -11,22 +11,24 @@
#ifndef __SH_PFC_H
#define __SH_PFC_H
+#include <linux/stringify.h>
#include <asm-generic/gpio.h>
typedef unsigned short pinmux_enum_t;
typedef unsigned short pinmux_flag_t;
-#define PINMUX_TYPE_NONE 0
-#define PINMUX_TYPE_FUNCTION 1
-#define PINMUX_TYPE_GPIO 2
-#define PINMUX_TYPE_OUTPUT 3
-#define PINMUX_TYPE_INPUT 4
-#define PINMUX_TYPE_INPUT_PULLUP 5
-#define PINMUX_TYPE_INPUT_PULLDOWN 6
+enum {
+ PINMUX_TYPE_NONE,
-#define PINMUX_FLAG_TYPE (0x7)
-#define PINMUX_FLAG_WANT_PULLUP (1 << 3)
-#define PINMUX_FLAG_WANT_PULLDOWN (1 << 4)
+ PINMUX_TYPE_FUNCTION,
+ PINMUX_TYPE_GPIO,
+ PINMUX_TYPE_OUTPUT,
+ PINMUX_TYPE_INPUT,
+ PINMUX_TYPE_INPUT_PULLUP,
+ PINMUX_TYPE_INPUT_PULLDOWN,
+
+ PINMUX_FLAG_TYPE, /* must be last */
+};
#define PINMUX_FLAG_DBIT_SHIFT 5
#define PINMUX_FLAG_DBIT (0x1f << PINMUX_FLAG_DBIT_SHIFT)
@@ -36,9 +38,12 @@
struct pinmux_gpio {
pinmux_enum_t enum_id;
pinmux_flag_t flags;
+ const char *name;
};
-#define PINMUX_GPIO(gpio, data_or_mark) [gpio] = { data_or_mark }
+#define PINMUX_GPIO(gpio, data_or_mark) \
+ [gpio] = { .name = __stringify(gpio), .enum_id = data_or_mark, .flags = PINMUX_TYPE_NONE }
+
#define PINMUX_DATA(data_or_mark, ids...) data_or_mark, ids, 0
struct pinmux_cfg_reg {
@@ -89,7 +94,7 @@
unsigned long size;
};
-struct pinmux_info {
+struct sh_pfc {
char *name;
pinmux_enum_t reserved_id;
struct pinmux_range data;
@@ -112,17 +117,45 @@
struct pinmux_irq *gpio_irq;
unsigned int gpio_irq_size;
+ spinlock_t lock;
+
struct resource *resource;
unsigned int num_resources;
struct pfc_window *window;
unsigned long unlock_reg;
-
- struct gpio_chip chip;
};
-int register_pinmux(struct pinmux_info *pip);
-int unregister_pinmux(struct pinmux_info *pip);
+/* XXX compat for now */
+#define pinmux_info sh_pfc
+
+/* drivers/sh/pfc/gpio.c */
+int sh_pfc_register_gpiochip(struct sh_pfc *pfc);
+
+/* drivers/sh/pfc/pinctrl.c */
+int sh_pfc_register_pinctrl(struct sh_pfc *pfc);
+
+/* drivers/sh/pfc/core.c */
+int register_sh_pfc(struct sh_pfc *pfc);
+
+int sh_pfc_read_bit(struct pinmux_data_reg *dr, unsigned long in_pos);
+void sh_pfc_write_bit(struct pinmux_data_reg *dr, unsigned long in_pos,
+ unsigned long value);
+int sh_pfc_get_data_reg(struct sh_pfc *pfc, unsigned gpio,
+ struct pinmux_data_reg **drp, int *bitp);
+int sh_pfc_gpio_to_enum(struct sh_pfc *pfc, unsigned gpio, int pos,
+ pinmux_enum_t *enum_idp);
+int sh_pfc_config_gpio(struct sh_pfc *pfc, unsigned gpio, int pinmux_type,
+ int cfg_mode);
+
+/* xxx */
+static inline int register_pinmux(struct pinmux_info *pip)
+{
+ struct sh_pfc *pfc = pip;
+ return register_sh_pfc(pfc);
+}
+
+enum { GPIO_CFG_DRYRUN, GPIO_CFG_REQ, GPIO_CFG_FREE };
/* helper macro for port */
#define PORT_1(fn, pfx, sfx) fn(pfx, sfx)
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index b534a1b..642cb73 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -225,14 +225,11 @@
/* device driver is going to provide hardware time stamp */
SKBTX_IN_PROGRESS = 1 << 2,
- /* ensure the originating sk reference is available on driver level */
- SKBTX_DRV_NEEDS_SK_REF = 1 << 3,
-
/* device driver supports TX zero-copy buffers */
- SKBTX_DEV_ZEROCOPY = 1 << 4,
+ SKBTX_DEV_ZEROCOPY = 1 << 3,
/* generate wifi status information (where possible) */
- SKBTX_WIFI_STATUS = 1 << 5,
+ SKBTX_WIFI_STATUS = 1 << 4,
};
/*
diff --git a/include/linux/smp.h b/include/linux/smp.h
index 717fb74..dd6f06b 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -90,10 +90,6 @@
void __init call_function_init(void);
void generic_smp_call_function_single_interrupt(void);
void generic_smp_call_function_interrupt(void);
-void ipi_call_lock(void);
-void ipi_call_unlock(void);
-void ipi_call_lock_irq(void);
-void ipi_call_unlock_irq(void);
#else
static inline void call_function_init(void) { }
#endif
@@ -181,7 +177,6 @@
} while (0)
static inline void smp_send_reschedule(int cpu) { }
-#define num_booting_cpus() 1
#define smp_prepare_boot_cpu() do {} while (0)
#define smp_call_function_many(mask, func, info, wait) \
(up_smp_call_function(func, info))
diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
index d3e1075..c73d144 100644
--- a/include/linux/spi/pxa2xx_spi.h
+++ b/include/linux/spi/pxa2xx_spi.h
@@ -43,7 +43,7 @@
void (*cs_control)(u32 command);
};
-#ifdef CONFIG_ARCH_PXA
+#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
#include <linux/clk.h>
#include <mach/dma.h>
diff --git a/include/linux/splice.h b/include/linux/splice.h
index 26e5b61..09a545a 100644
--- a/include/linux/splice.h
+++ b/include/linux/splice.h
@@ -51,7 +51,8 @@
struct splice_pipe_desc {
struct page **pages; /* page map */
struct partial_page *partial; /* pages[] may not be contig */
- int nr_pages; /* number of pages in map */
+ int nr_pages; /* number of populated pages in map */
+ unsigned int nr_pages_max; /* pages[] & partial[] arrays size */
unsigned int flags; /* splice flags */
const struct pipe_buf_operations *ops;/* ops associated with output pipe */
void (*spd_release)(struct splice_pipe_desc *, unsigned int);
@@ -85,9 +86,8 @@
/*
* for dynamic pipe sizing
*/
-extern int splice_grow_spd(struct pipe_inode_info *, struct splice_pipe_desc *);
-extern void splice_shrink_spd(struct pipe_inode_info *,
- struct splice_pipe_desc *);
+extern int splice_grow_spd(const struct pipe_inode_info *, struct splice_pipe_desc *);
+extern void splice_shrink_spd(struct splice_pipe_desc *);
extern void spd_release_page(struct splice_pipe_desc *, unsigned int);
extern const struct pipe_buf_operations page_cache_pipe_buf_ops;
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index cd83059..0c808d7 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -408,6 +408,12 @@
#endif /* !CONFIG_PM_SLEEP */
+#ifdef CONFIG_PM_SLEEP_DEBUG
+extern bool pm_print_times_enabled;
+#else
+#define pm_print_times_enabled (false)
+#endif
+
#ifdef CONFIG_PM_AUTOSLEEP
/* kernel/power/autosleep.c */
diff --git a/include/linux/swapops.h b/include/linux/swapops.h
index 792d16d..47ead51 100644
--- a/include/linux/swapops.h
+++ b/include/linux/swapops.h
@@ -9,13 +9,15 @@
* get good packing density in that tree, so the index should be dense in
* the low-order bits.
*
- * We arrange the `type' and `offset' fields so that `type' is at the five
+ * We arrange the `type' and `offset' fields so that `type' is at the seven
* high-order bits of the swp_entry_t and `offset' is right-aligned in the
- * remaining bits.
+ * remaining bits. Although `type' itself needs only five bits, we allow for
+ * shmem/tmpfs to shift it all up a further two bits: see swp_to_radix_entry().
*
* swp_entry_t's are *never* stored anywhere in their arch-dependent format.
*/
-#define SWP_TYPE_SHIFT(e) (sizeof(e.val) * 8 - MAX_SWAPFILES_SHIFT)
+#define SWP_TYPE_SHIFT(e) ((sizeof(e.val) * 8) - \
+ (MAX_SWAPFILES_SHIFT + RADIX_TREE_EXCEPTIONAL_SHIFT))
#define SWP_OFFSET_MASK(e) ((1UL << SWP_TYPE_SHIFT(e)) - 1)
/*
diff --git a/include/linux/task_work.h b/include/linux/task_work.h
index 294d5d5..fb46b03 100644
--- a/include/linux/task_work.h
+++ b/include/linux/task_work.h
@@ -4,29 +4,21 @@
#include <linux/list.h>
#include <linux/sched.h>
-struct task_work;
-typedef void (*task_work_func_t)(struct task_work *);
-
-struct task_work {
- struct hlist_node hlist;
- task_work_func_t func;
- void *data;
-};
+typedef void (*task_work_func_t)(struct callback_head *);
static inline void
-init_task_work(struct task_work *twork, task_work_func_t func, void *data)
+init_task_work(struct callback_head *twork, task_work_func_t func)
{
twork->func = func;
- twork->data = data;
}
-int task_work_add(struct task_struct *task, struct task_work *twork, bool);
-struct task_work *task_work_cancel(struct task_struct *, task_work_func_t);
+int task_work_add(struct task_struct *task, struct callback_head *twork, bool);
+struct callback_head *task_work_cancel(struct task_struct *, task_work_func_t);
void task_work_run(void);
static inline void exit_task_work(struct task_struct *task)
{
- if (unlikely(!hlist_empty(&task->task_works)))
+ if (unlikely(task->task_works))
task_work_run();
}
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 4c5b632..5f359db 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -69,16 +69,16 @@
#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3])
enum {
- TCP_FLAG_CWR = __cpu_to_be32(0x00800000),
- TCP_FLAG_ECE = __cpu_to_be32(0x00400000),
- TCP_FLAG_URG = __cpu_to_be32(0x00200000),
- TCP_FLAG_ACK = __cpu_to_be32(0x00100000),
- TCP_FLAG_PSH = __cpu_to_be32(0x00080000),
- TCP_FLAG_RST = __cpu_to_be32(0x00040000),
- TCP_FLAG_SYN = __cpu_to_be32(0x00020000),
- TCP_FLAG_FIN = __cpu_to_be32(0x00010000),
- TCP_RESERVED_BITS = __cpu_to_be32(0x0F000000),
- TCP_DATA_OFFSET = __cpu_to_be32(0xF0000000)
+ TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000),
+ TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000),
+ TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000),
+ TCP_FLAG_ACK = __constant_cpu_to_be32(0x00100000),
+ TCP_FLAG_PSH = __constant_cpu_to_be32(0x00080000),
+ TCP_FLAG_RST = __constant_cpu_to_be32(0x00040000),
+ TCP_FLAG_SYN = __constant_cpu_to_be32(0x00020000),
+ TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000),
+ TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000),
+ TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000)
};
/*
diff --git a/include/linux/tick.h b/include/linux/tick.h
index ab8be90..f37fceb 100644
--- a/include/linux/tick.h
+++ b/include/linux/tick.h
@@ -31,10 +31,10 @@
* struct tick_sched - sched tick emulation and no idle tick control/stats
* @sched_timer: hrtimer to schedule the periodic tick in high
* resolution mode
- * @idle_tick: Store the last idle tick expiry time when the tick
- * timer is modified for idle sleeps. This is necessary
+ * @last_tick: Store the last tick expiry time when the tick
+ * timer is modified for nohz sleeps. This is necessary
* to resume the tick timer operation in the timeline
- * when the CPU returns from idle
+ * when the CPU returns from nohz sleep.
* @tick_stopped: Indicator that the idle tick has been stopped
* @idle_jiffies: jiffies at the entry to idle for idle time accounting
* @idle_calls: Total number of idle calls
@@ -51,7 +51,7 @@
struct hrtimer sched_timer;
unsigned long check_clocks;
enum tick_nohz_mode nohz_mode;
- ktime_t idle_tick;
+ ktime_t last_tick;
int inidle;
int tick_stopped;
unsigned long idle_jiffies;
diff --git a/include/linux/time-armada-370-xp.h b/include/linux/time-armada-370-xp.h
new file mode 100644
index 0000000..dfdfdc0
--- /dev/null
+++ b/include/linux/time-armada-370-xp.h
@@ -0,0 +1,18 @@
+/*
+ * Marvell Armada 370/XP SoC timer handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+#ifndef __TIME_ARMADA_370_XPPRCMU_H
+#define __TIME_ARMADA_370_XPPRCMU_H
+
+#include <linux/init.h>
+
+void __init armada_370_xp_timer_init(void);
+
+#endif
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 6a4d82b..1e98b55 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -192,7 +192,7 @@
* hlist_add_head(task->task_works);
*/
smp_mb__after_clear_bit();
- if (unlikely(!hlist_empty(¤t->task_works)))
+ if (unlikely(current->task_works))
task_work_run();
}
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index bd96ecd..802de56 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -153,7 +153,7 @@
} \
static inline void trace_##name##_rcuidle(proto) \
{ \
- if (static_branch(&__tracepoint_##name.key)) \
+ if (static_key_false(&__tracepoint_##name.key)) \
__DO_TRACE(&__tracepoint_##name, \
TP_PROTO(data_proto), \
TP_ARGS(data_args), \
diff --git a/include/linux/types.h b/include/linux/types.h
index 9c1bd53..bf0dd75 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -246,14 +246,15 @@
};
/**
- * struct rcu_head - callback structure for use with RCU
+ * struct callback_head - callback structure for use with RCU and task_work
* @next: next update requests in a list
* @func: actual update function to call after the grace period.
*/
-struct rcu_head {
- struct rcu_head *next;
- void (*func)(struct rcu_head *head);
+struct callback_head {
+ struct callback_head *next;
+ void (*func)(struct callback_head *head);
};
+#define rcu_head callback_head
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 7f855d5..49b3ac2 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -126,8 +126,6 @@
unsigned wireless:1; /* Wireless USB HCD */
unsigned authorized_default:1;
unsigned has_tt:1; /* Integrated TT in root hub */
- unsigned broken_pci_sleep:1; /* Don't put the
- controller in PCI-D3 for system sleep */
unsigned int irq; /* irq allocated */
void __iomem *regs; /* device memory/io */
diff --git a/include/linux/vga_switcheroo.h b/include/linux/vga_switcheroo.h
index b455c7c..ddb419c 100644
--- a/include/linux/vga_switcheroo.h
+++ b/include/linux/vga_switcheroo.h
@@ -7,11 +7,19 @@
* vga_switcheroo.h - Support for laptop with dual GPU using one set of outputs
*/
+#ifndef _LINUX_VGA_SWITCHEROO_H_
+#define _LINUX_VGA_SWITCHEROO_H_
+
#include <linux/fb.h>
+struct pci_dev;
+
enum vga_switcheroo_state {
VGA_SWITCHEROO_OFF,
VGA_SWITCHEROO_ON,
+ /* below are referred only from vga_switcheroo_get_client_state() */
+ VGA_SWITCHEROO_INIT,
+ VGA_SWITCHEROO_NOT_FOUND,
};
enum vga_switcheroo_client_id {
@@ -50,6 +58,8 @@
int vga_switcheroo_process_delayed_switch(void);
+int vga_switcheroo_get_client_state(struct pci_dev *dev);
+
#else
static inline void vga_switcheroo_unregister_client(struct pci_dev *dev) {}
@@ -62,5 +72,8 @@
int id, bool active) { return 0; }
static inline void vga_switcheroo_unregister_handler(void) {}
static inline int vga_switcheroo_process_delayed_switch(void) { return 0; }
+static inline int vga_switcheroo_get_client_state(struct pci_dev *dev) { return VGA_SWITCHEROO_ON; }
+
#endif
+#endif /* _LINUX_VGA_SWITCHEROO_H_ */
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 370d111..2039c5d 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -2640,9 +2640,9 @@
/* Experimental, these three ioctls may change over the next couple of kernel
versions. */
-#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 96, struct v4l2_enum_dv_timings)
-#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 97, struct v4l2_dv_timings)
-#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 98, struct v4l2_dv_timings_cap)
+#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 98, struct v4l2_enum_dv_timings)
+#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 99, struct v4l2_dv_timings)
+#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 100, struct v4l2_dv_timings_cap)
/* Reminder: when adding new ioctls please add support for them to
drivers/media/video/v4l2-compat-ioctl32.c as well! */
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 66a7b57..3def64b 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -1144,6 +1144,12 @@
__u8 data[240];
} __packed;
+#define HCI_EV_KEY_REFRESH_COMPLETE 0x30
+struct hci_ev_key_refresh_complete {
+ __u8 status;
+ __le16 handle;
+} __packed;
+
#define HCI_EV_IO_CAPA_REQUEST 0x31
struct hci_ev_io_capa_request {
bdaddr_t bdaddr;
diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h
index b94765e..2040bff 100644
--- a/include/net/inetpeer.h
+++ b/include/net/inetpeer.h
@@ -40,7 +40,10 @@
u32 pmtu_orig;
u32 pmtu_learned;
struct inetpeer_addr_base redirect_learned;
- struct list_head gc_list;
+ union {
+ struct list_head gc_list;
+ struct rcu_head gc_rcu;
+ };
/*
* Once inet_peer is queued for deletion (refcnt == -1), following fields
* are not available: rid, ip_id_count, tcp_ts, tcp_ts_stamp
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index d6146b4..95374d1 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -1425,7 +1425,7 @@
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
if (!ct || !nf_ct_is_untracked(ct)) {
- nf_reset(skb);
+ nf_conntrack_put(skb->nfct);
skb->nfct = &nf_ct_untracked_get()->ct_general;
skb->nfctinfo = IP_CT_NEW;
nf_conntrack_get(skb->nfct);
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 1937c7d..95e39b6 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1940,6 +1940,11 @@
* to also unregister the device. If it returns 1, then mac80211
* will also go through the regular complete restart on resume.
*
+ * @set_wakeup: Enable or disable wakeup when WoWLAN configuration is
+ * modified. The reason is that device_set_wakeup_enable() is
+ * supposed to be called when the configuration changes, not only
+ * in suspend().
+ *
* @add_interface: Called when a netdevice attached to the hardware is
* enabled. Because it is not called for monitor mode devices, @start
* and @stop must be implemented.
@@ -2966,6 +2971,7 @@
* ieee80211_generic_frame_duration - Calculate the duration field for a frame
* @hw: pointer obtained from ieee80211_alloc_hw().
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @band: the band to calculate the frame duration on
* @frame_len: the length of the frame.
* @rate: the rate at which the frame is going to be transmitted.
*
diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h
index a88fb69..e1ce104 100644
--- a/include/net/netfilter/nf_conntrack_ecache.h
+++ b/include/net/netfilter/nf_conntrack_ecache.h
@@ -78,7 +78,7 @@
struct net *net = nf_ct_net(ct);
struct nf_conntrack_ecache *e;
- if (net->ct.nf_conntrack_event_cb == NULL)
+ if (!rcu_access_pointer(net->ct.nf_conntrack_event_cb))
return;
e = nf_ct_ecache_find(ct);
diff --git a/include/net/phonet/gprs.h b/include/net/phonet/gprs.h
index 928daf5..bcd525e 100644
--- a/include/net/phonet/gprs.h
+++ b/include/net/phonet/gprs.h
@@ -5,7 +5,7 @@
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Author: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Author: Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/include/net/route.h b/include/net/route.h
index ed2b78e..9870546 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -130,9 +130,9 @@
{
struct flowi4 fl4 = {
.flowi4_oif = oif,
+ .flowi4_tos = tos,
.daddr = daddr,
.saddr = saddr,
- .flowi4_tos = tos,
};
return ip_route_output_key(net, &fl4);
}
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index 55ce96b..9d7d54a 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -220,13 +220,16 @@
struct qdisc_skb_cb {
unsigned int pkt_len;
- unsigned char data[24];
+ u16 bond_queue_mapping;
+ u16 _pad;
+ unsigned char data[20];
};
static inline void qdisc_cb_private_validate(const struct sk_buff *skb, int sz)
{
struct qdisc_skb_cb *qcb;
- BUILD_BUG_ON(sizeof(skb->cb) < sizeof(unsigned int) + sz);
+
+ BUILD_BUG_ON(sizeof(skb->cb) < offsetof(struct qdisc_skb_cb, data) + sz);
BUILD_BUG_ON(sizeof(qcb->data) < sz);
}
diff --git a/include/net/scm.h b/include/net/scm.h
index d456f4c7..079d788 100644
--- a/include/net/scm.h
+++ b/include/net/scm.h
@@ -13,7 +13,6 @@
#define SCM_MAX_FD 253
struct scm_fp_list {
- struct list_head list;
short count;
short max;
struct file *fp[SCM_MAX_FD];
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index e4652fe..fecdf31 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -912,6 +912,9 @@
/* Is this structure kfree()able? */
malloced:1;
+ /* Has this transport moved the ctsn since we last sacked */
+ __u32 sack_generation;
+
struct flowi fl;
/* This is the peer's IP address and port. */
@@ -1584,6 +1587,7 @@
*/
__u8 sack_needed; /* Do we need to sack the peer? */
__u32 sack_cnt;
+ __u32 sack_generation;
/* These are capabilities which our peer advertised. */
__u8 ecn_capable:1, /* Can peer do ECN? */
diff --git a/include/net/sctp/tsnmap.h b/include/net/sctp/tsnmap.h
index e7728bc..2c5d2b4 100644
--- a/include/net/sctp/tsnmap.h
+++ b/include/net/sctp/tsnmap.h
@@ -117,7 +117,8 @@
int sctp_tsnmap_check(const struct sctp_tsnmap *, __u32 tsn);
/* Mark this TSN as seen. */
-int sctp_tsnmap_mark(struct sctp_tsnmap *, __u32 tsn);
+int sctp_tsnmap_mark(struct sctp_tsnmap *, __u32 tsn,
+ struct sctp_transport *trans);
/* Mark this TSN and all lower as seen. */
void sctp_tsnmap_skip(struct sctp_tsnmap *map, __u32 tsn);
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index f4f1c96..10ce74f 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -163,6 +163,8 @@
ATAPI_COMMAND_SET = 1,
};
+#define ATA_RESP_FIS_SIZE 24
+
struct sata_device {
enum ata_command_set command_set;
struct smp_resp rps_resp; /* report_phy_sata_resp */
@@ -171,7 +173,7 @@
struct ata_port *ap;
struct ata_host ata_host;
- struct ata_taskfile tf;
+ u8 fis[ATA_RESP_FIS_SIZE];
};
enum {
@@ -537,7 +539,7 @@
*/
struct ata_task_resp {
u16 frame_len;
- u8 ending_fis[24]; /* dev to host or data-in */
+ u8 ending_fis[ATA_RESP_FIS_SIZE]; /* dev to host or data-in */
};
#define SAS_STATUS_BUF_SIZE 96
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 1e11985..ac06cc5 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -134,10 +134,16 @@
static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd)
{
+ struct scsi_driver **sdp;
+
if (!cmd->request->rq_disk)
return NULL;
- return *(struct scsi_driver **)cmd->request->rq_disk->private_data;
+ sdp = (struct scsi_driver **)cmd->request->rq_disk->private_data;
+ if (!sdp)
+ return NULL;
+
+ return *sdp;
}
extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 6efb2e1..ba96988 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -151,6 +151,7 @@
SD_LAST_BUGGY_SECTORS */
unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */
unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
+ unsigned try_rc_10_first:1; /* Try READ_CAPACACITY_10 first */
unsigned is_visible:1; /* is the device visible in sysfs */
DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
diff --git a/include/sound/tea575x-tuner.h b/include/sound/tea575x-tuner.h
index ec3f910..0c3c2fb 100644
--- a/include/sound/tea575x-tuner.h
+++ b/include/sound/tea575x-tuner.h
@@ -44,6 +44,7 @@
struct snd_tea575x {
struct v4l2_device *v4l2_dev;
+ struct v4l2_file_operations fops;
struct video_device vd; /* video device */
int radio_nr; /* radio_nr */
bool tea5759; /* 5759 chip is present */
@@ -62,7 +63,7 @@
int (*ext_init)(struct snd_tea575x *tea);
};
-int snd_tea575x_init(struct snd_tea575x *tea);
+int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner);
void snd_tea575x_exit(struct snd_tea575x *tea);
#endif /* __SOUND_TEA575X_TUNER_H */
diff --git a/include/target/target_core_backend.h b/include/target/target_core_backend.h
index 2d7db85..f1405d33 100644
--- a/include/target/target_core_backend.h
+++ b/include/target/target_core_backend.h
@@ -24,10 +24,8 @@
struct se_subsystem_dev *, void *);
void (*free_device)(void *);
int (*transport_complete)(struct se_cmd *cmd, struct scatterlist *);
- int (*execute_cmd)(struct se_cmd *, struct scatterlist *, u32,
- enum dma_data_direction);
- int (*do_discard)(struct se_device *, sector_t, u32);
- void (*do_sync_cache)(struct se_cmd *);
+
+ int (*parse_cdb)(struct se_cmd *cmd);
ssize_t (*check_configfs_dev_params)(struct se_hba *,
struct se_subsystem_dev *);
ssize_t (*set_configfs_dev_params)(struct se_hba *,
@@ -40,6 +38,13 @@
unsigned char *(*get_sense_buffer)(struct se_cmd *);
};
+struct spc_ops {
+ int (*execute_rw)(struct se_cmd *cmd);
+ int (*execute_sync_cache)(struct se_cmd *cmd);
+ int (*execute_write_same)(struct se_cmd *cmd);
+ int (*execute_unmap)(struct se_cmd *cmd);
+};
+
int transport_subsystem_register(struct se_subsystem_api *);
void transport_subsystem_release(struct se_subsystem_api *);
@@ -49,6 +54,10 @@
void target_complete_cmd(struct se_cmd *, u8);
+int sbc_parse_cdb(struct se_cmd *cmd, struct spc_ops *ops);
+int spc_parse_cdb(struct se_cmd *cmd, unsigned int *size);
+int spc_get_write_same_sectors(struct se_cmd *cmd);
+
void transport_set_vpd_proto_id(struct t10_vpd *, unsigned char *);
int transport_set_vpd_assoc(struct t10_vpd *, unsigned char *);
int transport_set_vpd_ident_type(struct t10_vpd *, unsigned char *);
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index dc35d86..128ce46 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -145,12 +145,9 @@
TRANSPORT_NO_STATE = 0,
TRANSPORT_NEW_CMD = 1,
TRANSPORT_WRITE_PENDING = 3,
- TRANSPORT_PROCESS_WRITE = 4,
TRANSPORT_PROCESSING = 5,
TRANSPORT_COMPLETE = 6,
- TRANSPORT_PROCESS_TMR = 9,
TRANSPORT_ISTATE_PROCESSING = 11,
- TRANSPORT_NEW_CMD_MAP = 16,
TRANSPORT_COMPLETE_QF_WP = 18,
TRANSPORT_COMPLETE_QF_OK = 19,
};
@@ -160,25 +157,20 @@
SCF_SUPPORTED_SAM_OPCODE = 0x00000001,
SCF_TRANSPORT_TASK_SENSE = 0x00000002,
SCF_EMULATED_TASK_SENSE = 0x00000004,
- SCF_SCSI_DATA_SG_IO_CDB = 0x00000008,
- SCF_SCSI_CONTROL_SG_IO_CDB = 0x00000010,
- SCF_SCSI_NON_DATA_CDB = 0x00000020,
- SCF_SCSI_TMR_CDB = 0x00000040,
- SCF_SCSI_CDB_EXCEPTION = 0x00000080,
- SCF_SCSI_RESERVATION_CONFLICT = 0x00000100,
- SCF_FUA = 0x00000200,
- SCF_SE_LUN_CMD = 0x00000800,
- SCF_SE_ALLOW_EOO = 0x00001000,
- SCF_BIDI = 0x00002000,
- SCF_SENT_CHECK_CONDITION = 0x00004000,
- SCF_OVERFLOW_BIT = 0x00008000,
- SCF_UNDERFLOW_BIT = 0x00010000,
- SCF_SENT_DELAYED_TAS = 0x00020000,
- SCF_ALUA_NON_OPTIMIZED = 0x00040000,
- SCF_DELAYED_CMD_FROM_SAM_ATTR = 0x00080000,
- SCF_UNUSED = 0x00100000,
- SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC = 0x00200000,
- SCF_ACK_KREF = 0x00400000,
+ SCF_SCSI_DATA_CDB = 0x00000008,
+ SCF_SCSI_TMR_CDB = 0x00000010,
+ SCF_SCSI_CDB_EXCEPTION = 0x00000020,
+ SCF_SCSI_RESERVATION_CONFLICT = 0x00000040,
+ SCF_FUA = 0x00000080,
+ SCF_SE_LUN_CMD = 0x00000100,
+ SCF_BIDI = 0x00000400,
+ SCF_SENT_CHECK_CONDITION = 0x00000800,
+ SCF_OVERFLOW_BIT = 0x00001000,
+ SCF_UNDERFLOW_BIT = 0x00002000,
+ SCF_SENT_DELAYED_TAS = 0x00004000,
+ SCF_ALUA_NON_OPTIMIZED = 0x00008000,
+ SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC = 0x00020000,
+ SCF_ACK_KREF = 0x00040000,
};
/* struct se_dev_entry->lun_flags and struct se_lun->lun_access */
@@ -220,6 +212,7 @@
TCM_CHECK_CONDITION_UNIT_ATTENTION = 0x0e,
TCM_CHECK_CONDITION_NOT_READY = 0x0f,
TCM_RESERVATION_CONFLICT = 0x10,
+ TCM_ADDRESS_OUT_OF_RANGE = 0x11,
};
enum target_sc_flags_table {
@@ -471,13 +464,6 @@
struct t10_reservation_ops pr_ops;
};
-struct se_queue_obj {
- atomic_t queue_cnt;
- spinlock_t cmd_queue_lock;
- struct list_head qobj_list;
- wait_queue_head_t thread_wq;
-};
-
struct se_tmr_req {
/* Task Management function to be performed */
u8 function;
@@ -486,11 +472,8 @@
int call_transport;
/* Reference to ITT that Task Mgmt should be performed */
u32 ref_task_tag;
- /* 64-bit encoded SAM LUN from $FABRIC_MOD TMR header */
- u64 ref_task_lun;
void *fabric_tmr_ptr;
struct se_cmd *task_cmd;
- struct se_cmd *ref_cmd;
struct se_device *tmr_dev;
struct se_lun *tmr_lun;
struct list_head tmr_list;
@@ -537,7 +520,6 @@
/* Only used for internal passthrough and legacy TCM fabric modules */
struct se_session *se_sess;
struct se_tmr_req *se_tmr_req;
- struct list_head se_queue_node;
struct list_head se_cmd_list;
struct completion cmd_wait_comp;
struct kref cmd_kref;
@@ -575,7 +557,6 @@
struct scatterlist *t_bidi_data_sg;
unsigned int t_bidi_data_nents;
- struct list_head execute_list;
struct list_head state_list;
bool state_active;
@@ -633,7 +614,6 @@
struct list_head sess_list;
struct list_head sess_acl_list;
struct list_head sess_cmd_list;
- struct list_head sess_wait_list;
spinlock_t sess_cmd_lock;
struct kref sess_kref;
};
@@ -780,13 +760,11 @@
/* Active commands on this virtual SE device */
atomic_t simple_cmds;
atomic_t dev_ordered_id;
- atomic_t execute_tasks;
atomic_t dev_ordered_sync;
atomic_t dev_qf_count;
struct se_obj dev_obj;
struct se_obj dev_access_obj;
struct se_obj dev_export_obj;
- struct se_queue_obj dev_queue_obj;
spinlock_t delayed_cmd_lock;
spinlock_t execute_task_lock;
spinlock_t dev_reservation_lock;
@@ -802,11 +780,9 @@
struct t10_pr_registration *dev_pr_res_holder;
struct list_head dev_sep_list;
struct list_head dev_tmr_list;
- /* Pointer to descriptor for processing thread */
- struct task_struct *process_thread;
+ struct workqueue_struct *tmr_wq;
struct work_struct qf_work_queue;
struct list_head delayed_cmd_list;
- struct list_head execute_list;
struct list_head state_list;
struct list_head qf_cmd_list;
/* Pointer to associated SE HBA */
diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h
index 1169599..69fb3cf 100644
--- a/include/target/target_core_fabric.h
+++ b/include/target/target_core_fabric.h
@@ -33,12 +33,6 @@
struct se_node_acl *);
u32 (*tpg_get_inst_index)(struct se_portal_group *);
/*
- * Optional function pointer for TCM to perform command map
- * from TCM processing thread context, for those struct se_cmd
- * initially allocated in interrupt context.
- */
- int (*new_cmd_map)(struct se_cmd *);
- /*
* Optional to release struct se_cmd and fabric dependent allocated
* I/O descriptor in transport_cmd_check_stop().
*
@@ -47,6 +41,7 @@
*/
int (*check_stop_free)(struct se_cmd *);
void (*release_cmd)(struct se_cmd *);
+ void (*put_session)(struct se_session *);
/*
* Called with spin_lock_bh(struct se_portal_group->session_lock held.
*/
@@ -107,20 +102,18 @@
struct se_session *, u32, int, int, unsigned char *);
int transport_lookup_cmd_lun(struct se_cmd *, u32);
int target_setup_cmd_from_cdb(struct se_cmd *, unsigned char *);
-void target_submit_cmd(struct se_cmd *, struct se_session *, unsigned char *,
+int target_submit_cmd(struct se_cmd *, struct se_session *, unsigned char *,
unsigned char *, u32, u32, int, int, int);
int target_submit_tmr(struct se_cmd *se_cmd, struct se_session *se_sess,
unsigned char *sense, u32 unpacked_lun,
void *fabric_tmr_ptr, unsigned char tm_type,
gfp_t, unsigned int, int);
int transport_handle_cdb_direct(struct se_cmd *);
-int transport_generic_handle_cdb_map(struct se_cmd *);
-int transport_generic_handle_data(struct se_cmd *);
int transport_generic_map_mem_to_cmd(struct se_cmd *cmd,
struct scatterlist *, u32, struct scatterlist *, u32);
int transport_generic_new_cmd(struct se_cmd *);
-void transport_generic_process_write(struct se_cmd *);
+void target_execute_cmd(struct se_cmd *cmd);
void transport_generic_free_cmd(struct se_cmd *, int);
@@ -128,9 +121,8 @@
int transport_check_aborted_status(struct se_cmd *, int);
int transport_send_check_condition_and_sense(struct se_cmd *, u8, int);
-void target_get_sess_cmd(struct se_session *, struct se_cmd *, bool);
int target_put_sess_cmd(struct se_session *, struct se_cmd *);
-void target_splice_sess_cmd_list(struct se_session *);
+void target_sess_cmd_list_set_waiting(struct se_session *);
void target_wait_for_sess_cmds(struct se_session *, int);
int core_alua_check_nonop_delay(struct se_cmd *);
diff --git a/include/trace/events/rcu.h b/include/trace/events/rcu.h
index 1480900..5bde94d 100644
--- a/include/trace/events/rcu.h
+++ b/include/trace/events/rcu.h
@@ -289,6 +289,7 @@
* "In holdoff": Nothing to do, holding off after unsuccessful attempt.
* "Begin holdoff": Attempt failed, don't retry until next jiffy.
* "Dyntick with callbacks": Entering dyntick-idle despite callbacks.
+ * "Dyntick with lazy callbacks": Entering dyntick-idle w/lazy callbacks.
* "More callbacks": Still more callbacks, try again to clear them out.
* "Callbacks drained": All callbacks processed, off to dyntick idle!
* "Timer": Timer fired to cause CPU to continue processing callbacks.
@@ -540,6 +541,50 @@
__entry->rcutorturename, __entry->rhp)
);
+/*
+ * Tracepoint for _rcu_barrier() execution. The string "s" describes
+ * the _rcu_barrier phase:
+ * "Begin": rcu_barrier_callback() started.
+ * "Check": rcu_barrier_callback() checking for piggybacking.
+ * "EarlyExit": rcu_barrier_callback() piggybacked, thus early exit.
+ * "Inc1": rcu_barrier_callback() piggyback check counter incremented.
+ * "Offline": rcu_barrier_callback() found offline CPU
+ * "OnlineQ": rcu_barrier_callback() found online CPU with callbacks.
+ * "OnlineNQ": rcu_barrier_callback() found online CPU, no callbacks.
+ * "IRQ": An rcu_barrier_callback() callback posted on remote CPU.
+ * "CB": An rcu_barrier_callback() invoked a callback, not the last.
+ * "LastCB": An rcu_barrier_callback() invoked the last callback.
+ * "Inc2": rcu_barrier_callback() piggyback check counter incremented.
+ * The "cpu" argument is the CPU or -1 if meaningless, the "cnt" argument
+ * is the count of remaining callbacks, and "done" is the piggybacking count.
+ */
+TRACE_EVENT(rcu_barrier,
+
+ TP_PROTO(char *rcuname, char *s, int cpu, int cnt, unsigned long done),
+
+ TP_ARGS(rcuname, s, cpu, cnt, done),
+
+ TP_STRUCT__entry(
+ __field(char *, rcuname)
+ __field(char *, s)
+ __field(int, cpu)
+ __field(int, cnt)
+ __field(unsigned long, done)
+ ),
+
+ TP_fast_assign(
+ __entry->rcuname = rcuname;
+ __entry->s = s;
+ __entry->cpu = cpu;
+ __entry->cnt = cnt;
+ __entry->done = done;
+ ),
+
+ TP_printk("%s %s cpu %d remaining %d # %lu",
+ __entry->rcuname, __entry->s, __entry->cpu, __entry->cnt,
+ __entry->done)
+);
+
#else /* #ifdef CONFIG_RCU_TRACE */
#define trace_rcu_grace_period(rcuname, gpnum, gpevent) do { } while (0)
@@ -563,6 +608,7 @@
#define trace_rcu_batch_end(rcuname, callbacks_invoked, cb, nr, iit, risk) \
do { } while (0)
#define trace_rcu_torture_read(rcutorturename, rhp) do { } while (0)
+#define trace_rcu_barrier(name, s, cpu, cnt, done) do { } while (0)
#endif /* #else #ifdef CONFIG_RCU_TRACE */
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
index 7697249..c6bc2fa 100644
--- a/include/trace/ftrace.h
+++ b/include/trace/ftrace.h
@@ -571,6 +571,7 @@
#undef __print_flags
#undef __print_symbolic
+#undef __print_hex
#undef __get_dynamic_array
#undef __get_str
diff --git a/init/main.c b/init/main.c
index b5cc0a7..3f151f6 100644
--- a/init/main.c
+++ b/init/main.c
@@ -68,6 +68,7 @@
#include <linux/shmem_fs.h>
#include <linux/slab.h>
#include <linux/perf_event.h>
+#include <linux/file.h>
#include <asm/io.h>
#include <asm/bugs.h>
@@ -804,8 +805,8 @@
system_state = SYSTEM_RUNNING;
numa_default_policy();
-
current->signal->flags |= SIGNAL_UNKILLABLE;
+ flush_delayed_fput();
if (ramdisk_execute_command) {
run_init_process(ramdisk_execute_command);
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 8ce5769..f8e54f5 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -413,7 +413,7 @@
}
static int mqueue_create(struct inode *dir, struct dentry *dentry,
- umode_t mode, struct nameidata *nd)
+ umode_t mode, bool excl)
{
struct inode *inode;
struct mq_attr *attr = dentry->d_fsdata;
@@ -721,8 +721,8 @@
/*
* Invoked when creating a new queue via sys_mq_open
*/
-static struct file *do_create(struct ipc_namespace *ipc_ns, struct dentry *dir,
- struct dentry *dentry, int oflag, umode_t mode,
+static struct file *do_create(struct ipc_namespace *ipc_ns, struct inode *dir,
+ struct path *path, int oflag, umode_t mode,
struct mq_attr *attr)
{
const struct cred *cred = current_cred();
@@ -732,9 +732,9 @@
if (attr) {
ret = mq_attr_ok(ipc_ns, attr);
if (ret)
- goto out;
+ return ERR_PTR(ret);
/* store for use during create */
- dentry->d_fsdata = attr;
+ path->dentry->d_fsdata = attr;
} else {
struct mq_attr def_attr;
@@ -744,71 +744,51 @@
ipc_ns->mq_msgsize_default);
ret = mq_attr_ok(ipc_ns, &def_attr);
if (ret)
- goto out;
+ return ERR_PTR(ret);
}
mode &= ~current_umask();
- ret = mnt_want_write(ipc_ns->mq_mnt);
+ ret = mnt_want_write(path->mnt);
if (ret)
- goto out;
- ret = vfs_create(dir->d_inode, dentry, mode, NULL);
- dentry->d_fsdata = NULL;
- if (ret)
- goto out_drop_write;
-
- result = dentry_open(dentry, ipc_ns->mq_mnt, oflag, cred);
+ return ERR_PTR(ret);
+ ret = vfs_create(dir, path->dentry, mode, true);
+ path->dentry->d_fsdata = NULL;
+ if (!ret)
+ result = dentry_open(path, oflag, cred);
+ else
+ result = ERR_PTR(ret);
/*
* dentry_open() took a persistent mnt_want_write(),
* so we can now drop this one.
*/
- mnt_drop_write(ipc_ns->mq_mnt);
+ mnt_drop_write(path->mnt);
return result;
-
-out_drop_write:
- mnt_drop_write(ipc_ns->mq_mnt);
-out:
- dput(dentry);
- mntput(ipc_ns->mq_mnt);
- return ERR_PTR(ret);
}
/* Opens existing queue */
-static struct file *do_open(struct ipc_namespace *ipc_ns,
- struct dentry *dentry, int oflag)
+static struct file *do_open(struct path *path, int oflag)
{
- int ret;
- const struct cred *cred = current_cred();
-
static const int oflag2acc[O_ACCMODE] = { MAY_READ, MAY_WRITE,
MAY_READ | MAY_WRITE };
-
- if ((oflag & O_ACCMODE) == (O_RDWR | O_WRONLY)) {
- ret = -EINVAL;
- goto err;
- }
-
- if (inode_permission(dentry->d_inode, oflag2acc[oflag & O_ACCMODE])) {
- ret = -EACCES;
- goto err;
- }
-
- return dentry_open(dentry, ipc_ns->mq_mnt, oflag, cred);
-
-err:
- dput(dentry);
- mntput(ipc_ns->mq_mnt);
- return ERR_PTR(ret);
+ int acc;
+ if ((oflag & O_ACCMODE) == (O_RDWR | O_WRONLY))
+ return ERR_PTR(-EINVAL);
+ acc = oflag2acc[oflag & O_ACCMODE];
+ if (inode_permission(path->dentry->d_inode, acc))
+ return ERR_PTR(-EACCES);
+ return dentry_open(path, oflag, current_cred());
}
SYSCALL_DEFINE4(mq_open, const char __user *, u_name, int, oflag, umode_t, mode,
struct mq_attr __user *, u_attr)
{
- struct dentry *dentry;
+ struct path path;
struct file *filp;
char *name;
struct mq_attr attr;
int fd, error;
struct ipc_namespace *ipc_ns = current->nsproxy->ipc_ns;
+ struct dentry *root = ipc_ns->mq_mnt->mnt_root;
if (u_attr && copy_from_user(&attr, u_attr, sizeof(struct mq_attr)))
return -EFAULT;
@@ -822,52 +802,49 @@
if (fd < 0)
goto out_putname;
- mutex_lock(&ipc_ns->mq_mnt->mnt_root->d_inode->i_mutex);
- dentry = lookup_one_len(name, ipc_ns->mq_mnt->mnt_root, strlen(name));
- if (IS_ERR(dentry)) {
- error = PTR_ERR(dentry);
+ error = 0;
+ mutex_lock(&root->d_inode->i_mutex);
+ path.dentry = lookup_one_len(name, root, strlen(name));
+ if (IS_ERR(path.dentry)) {
+ error = PTR_ERR(path.dentry);
goto out_putfd;
}
- mntget(ipc_ns->mq_mnt);
+ path.mnt = mntget(ipc_ns->mq_mnt);
if (oflag & O_CREAT) {
- if (dentry->d_inode) { /* entry already exists */
- audit_inode(name, dentry);
+ if (path.dentry->d_inode) { /* entry already exists */
+ audit_inode(name, path.dentry);
if (oflag & O_EXCL) {
error = -EEXIST;
goto out;
}
- filp = do_open(ipc_ns, dentry, oflag);
+ filp = do_open(&path, oflag);
} else {
- filp = do_create(ipc_ns, ipc_ns->mq_mnt->mnt_root,
- dentry, oflag, mode,
+ filp = do_create(ipc_ns, root->d_inode,
+ &path, oflag, mode,
u_attr ? &attr : NULL);
}
} else {
- if (!dentry->d_inode) {
+ if (!path.dentry->d_inode) {
error = -ENOENT;
goto out;
}
- audit_inode(name, dentry);
- filp = do_open(ipc_ns, dentry, oflag);
+ audit_inode(name, path.dentry);
+ filp = do_open(&path, oflag);
}
- if (IS_ERR(filp)) {
+ if (!IS_ERR(filp))
+ fd_install(fd, filp);
+ else
error = PTR_ERR(filp);
- goto out_putfd;
- }
-
- fd_install(fd, filp);
- goto out_upsem;
-
out:
- dput(dentry);
- mntput(ipc_ns->mq_mnt);
+ path_put(&path);
out_putfd:
- put_unused_fd(fd);
- fd = error;
-out_upsem:
- mutex_unlock(&ipc_ns->mq_mnt->mnt_root->d_inode->i_mutex);
+ if (error) {
+ put_unused_fd(fd);
+ fd = error;
+ }
+ mutex_unlock(&root->d_inode->i_mutex);
out_putname:
putname(name);
return fd;
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 5bf0790..3a5ca58 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -595,7 +595,7 @@
root_mnt = collect_mounts(&path);
path_put(&path);
- if (!root_mnt)
+ if (IS_ERR(root_mnt))
goto skip_it;
spin_lock(&hash_lock);
@@ -669,8 +669,8 @@
goto Err;
mnt = collect_mounts(&path);
path_put(&path);
- if (!mnt) {
- err = -ENOMEM;
+ if (IS_ERR(mnt)) {
+ err = PTR_ERR(mnt);
goto Err;
}
@@ -719,8 +719,8 @@
return err;
tagged = collect_mounts(&path2);
path_put(&path2);
- if (!tagged)
- return -ENOMEM;
+ if (IS_ERR(tagged))
+ return PTR_ERR(tagged);
err = kern_path(old, 0, &path1);
if (err) {
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index e683869..3823281 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -355,34 +355,15 @@
/* Get path information necessary for adding watches. */
static int audit_get_nd(struct audit_watch *watch, struct path *parent)
{
- struct nameidata nd;
- struct dentry *d;
- int err;
-
- err = kern_path_parent(watch->path, &nd);
- if (err)
- return err;
-
- if (nd.last_type != LAST_NORM) {
- path_put(&nd.path);
- return -EINVAL;
- }
-
- mutex_lock_nested(&nd.path.dentry->d_inode->i_mutex, I_MUTEX_PARENT);
- d = lookup_one_len(nd.last.name, nd.path.dentry, nd.last.len);
- if (IS_ERR(d)) {
- mutex_unlock(&nd.path.dentry->d_inode->i_mutex);
- path_put(&nd.path);
+ struct dentry *d = kern_path_locked(watch->path, parent);
+ if (IS_ERR(d))
return PTR_ERR(d);
- }
+ mutex_unlock(&parent->dentry->d_inode->i_mutex);
if (d->d_inode) {
/* update watch filter fields */
watch->dev = d->d_inode->i_sb->s_dev;
watch->ino = d->d_inode->i_ino;
}
- mutex_unlock(&nd.path.dentry->d_inode->i_mutex);
-
- *parent = nd.path;
dput(d);
return 0;
}
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 72fcd30..af2b564 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -255,12 +255,17 @@
EXPORT_SYMBOL_GPL(cgroup_lock_is_held);
+static int css_unbias_refcnt(int refcnt)
+{
+ return refcnt >= 0 ? refcnt : refcnt - CSS_DEACT_BIAS;
+}
+
/* the current nr of refs, always >= 0 whether @css is deactivated or not */
static int css_refcnt(struct cgroup_subsys_state *css)
{
int v = atomic_read(&css->refcnt);
- return v >= 0 ? v : v - CSS_DEACT_BIAS;
+ return css_unbias_refcnt(v);
}
/* convenient tests for these bits */
@@ -817,7 +822,7 @@
*/
static int cgroup_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode);
-static struct dentry *cgroup_lookup(struct inode *, struct dentry *, struct nameidata *);
+static struct dentry *cgroup_lookup(struct inode *, struct dentry *, unsigned int);
static int cgroup_rmdir(struct inode *unused_dir, struct dentry *dentry);
static int cgroup_populate_dir(struct cgroup *cgrp);
static const struct inode_operations cgroup_dir_inode_operations;
@@ -896,13 +901,10 @@
mutex_unlock(&cgroup_mutex);
/*
- * We want to drop the active superblock reference from the
- * cgroup creation after all the dentry refs are gone -
- * kill_sb gets mighty unhappy otherwise. Mark
- * dentry->d_fsdata with cgroup_diput() to tell
- * cgroup_d_release() to call deactivate_super().
+ * Drop the active superblock reference that we took when we
+ * created the cgroup
*/
- dentry->d_fsdata = cgroup_diput;
+ deactivate_super(cgrp->root->sb);
/*
* if we're getting rid of the cgroup, refcount should ensure
@@ -928,13 +930,6 @@
return 1;
}
-static void cgroup_d_release(struct dentry *dentry)
-{
- /* did cgroup_diput() tell me to deactivate super? */
- if (dentry->d_fsdata == cgroup_diput)
- deactivate_super(dentry->d_sb);
-}
-
static void remove_dir(struct dentry *d)
{
struct dentry *parent = dget(d->d_parent);
@@ -1542,7 +1537,6 @@
static const struct dentry_operations cgroup_dops = {
.d_iput = cgroup_diput,
.d_delete = cgroup_delete,
- .d_release = cgroup_d_release,
};
struct inode *inode =
@@ -1593,7 +1587,7 @@
opts.new_root = new_root;
/* Locate an existing or new sb for this hierarchy */
- sb = sget(fs_type, cgroup_test_super, cgroup_set_super, &opts);
+ sb = sget(fs_type, cgroup_test_super, cgroup_set_super, 0, &opts);
if (IS_ERR(sb)) {
ret = PTR_ERR(sb);
cgroup_drop_root(opts.new_root);
@@ -2576,7 +2570,7 @@
.rename = cgroup_rename,
};
-static struct dentry *cgroup_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
+static struct dentry *cgroup_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
{
if (dentry->d_name.len > NAME_MAX)
return ERR_PTR(-ENAMETOOLONG);
@@ -3889,8 +3883,12 @@
{
struct cgroup_subsys_state *css =
container_of(work, struct cgroup_subsys_state, dput_work);
+ struct dentry *dentry = css->cgroup->dentry;
+ struct super_block *sb = dentry->d_sb;
- dput(css->cgroup->dentry);
+ atomic_inc(&sb->s_active);
+ dput(dentry);
+ deactivate_super(sb);
}
static void init_cgroup_css(struct cgroup_subsys_state *css,
@@ -4982,10 +4980,12 @@
void __css_put(struct cgroup_subsys_state *css)
{
struct cgroup *cgrp = css->cgroup;
+ int v;
rcu_read_lock();
- atomic_dec(&css->refcnt);
- switch (css_refcnt(css)) {
+ v = css_unbias_refcnt(atomic_dec_return(&css->refcnt));
+
+ switch (v) {
case 1:
if (notify_on_release(cgrp)) {
set_bit(CGRP_RELEASABLE, &cgrp->flags);
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index 67b847d..1f91413e 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -14,6 +14,7 @@
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/kernel.h>
+#include <linux/kmsg_dump.h>
#include <linux/reboot.h>
#include <linux/sched.h>
#include <linux/sysrq.h>
@@ -2040,8 +2041,15 @@
*/
static int kdb_dmesg(int argc, const char **argv)
{
- char *syslog_data[4], *start, *end, c = '\0', *p;
- int diag, logging, logsize, lines = 0, adjust = 0, n;
+ int diag;
+ int logging;
+ int lines = 0;
+ int adjust = 0;
+ int n = 0;
+ int skip = 0;
+ struct kmsg_dumper dumper = { .active = 1 };
+ size_t len;
+ char buf[201];
if (argc > 2)
return KDB_ARGCOUNT;
@@ -2064,22 +2072,10 @@
kdb_set(2, setargs);
}
- /* syslog_data[0,1] physical start, end+1. syslog_data[2,3]
- * logical start, end+1. */
- kdb_syslog_data(syslog_data);
- if (syslog_data[2] == syslog_data[3])
- return 0;
- logsize = syslog_data[1] - syslog_data[0];
- start = syslog_data[2];
- end = syslog_data[3];
-#define KDB_WRAP(p) (((p - syslog_data[0]) % logsize) + syslog_data[0])
- for (n = 0, p = start; p < end; ++p) {
- c = *KDB_WRAP(p);
- if (c == '\n')
- ++n;
- }
- if (c != '\n')
- ++n;
+ kmsg_dump_rewind_nolock(&dumper);
+ while (kmsg_dump_get_line_nolock(&dumper, 1, NULL, 0, NULL))
+ n++;
+
if (lines < 0) {
if (adjust >= n)
kdb_printf("buffer only contains %d lines, nothing "
@@ -2087,21 +2083,11 @@
else if (adjust - lines >= n)
kdb_printf("buffer only contains %d lines, last %d "
"lines printed\n", n, n - adjust);
- if (adjust) {
- for (; start < end && adjust; ++start) {
- if (*KDB_WRAP(start) == '\n')
- --adjust;
- }
- if (start < end)
- ++start;
- }
- for (p = start; p < end && lines; ++p) {
- if (*KDB_WRAP(p) == '\n')
- ++lines;
- }
- end = p;
+ skip = adjust;
+ lines = abs(lines);
} else if (lines > 0) {
- int skip = n - (adjust + lines);
+ skip = n - lines - adjust;
+ lines = abs(lines);
if (adjust >= n) {
kdb_printf("buffer only contains %d lines, "
"nothing printed\n", n);
@@ -2112,35 +2098,24 @@
kdb_printf("buffer only contains %d lines, first "
"%d lines printed\n", n, lines);
}
- for (; start < end && skip; ++start) {
- if (*KDB_WRAP(start) == '\n')
- --skip;
- }
- for (p = start; p < end && lines; ++p) {
- if (*KDB_WRAP(p) == '\n')
- --lines;
- }
- end = p;
+ } else {
+ lines = n;
}
- /* Do a line at a time (max 200 chars) to reduce protocol overhead */
- c = '\n';
- while (start != end) {
- char buf[201];
- p = buf;
- if (KDB_FLAG(CMD_INTERRUPT))
- return 0;
- while (start < end && (c = *KDB_WRAP(start)) &&
- (p - buf) < sizeof(buf)-1) {
- ++start;
- *p++ = c;
- if (c == '\n')
- break;
+
+ if (skip >= n || skip < 0)
+ return 0;
+
+ kmsg_dump_rewind_nolock(&dumper);
+ while (kmsg_dump_get_line_nolock(&dumper, 1, buf, sizeof(buf), &len)) {
+ if (skip) {
+ skip--;
+ continue;
}
- *p = '\0';
- kdb_printf("%s", buf);
+ if (!lines--)
+ break;
+
+ kdb_printf("%.*s\n", (int)len - 1, buf);
}
- if (c != '\n')
- kdb_printf("\n");
return 0;
}
diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h
index 47c4e56..392ec6a 100644
--- a/kernel/debug/kdb/kdb_private.h
+++ b/kernel/debug/kdb/kdb_private.h
@@ -205,7 +205,6 @@
extern int kdb_grep_leading;
extern int kdb_grep_trailing;
extern char *kdb_cmds[];
-extern void kdb_syslog_data(char *syslog_data[]);
extern unsigned long kdb_task_state_string(const char *);
extern char kdb_task_state_char (const struct task_struct *);
extern unsigned long kdb_task_state(const struct task_struct *p,
diff --git a/kernel/events/core.c b/kernel/events/core.c
index f85c015..f1cf0ed 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -253,9 +253,9 @@
return !event->cgrp || event->cgrp == cpuctx->cgrp;
}
-static inline void perf_get_cgroup(struct perf_event *event)
+static inline bool perf_tryget_cgroup(struct perf_event *event)
{
- css_get(&event->cgrp->css);
+ return css_tryget(&event->cgrp->css);
}
static inline void perf_put_cgroup(struct perf_event *event)
@@ -484,7 +484,11 @@
event->cgrp = cgrp;
/* must be done before we fput() the file */
- perf_get_cgroup(event);
+ if (!perf_tryget_cgroup(event)) {
+ event->cgrp = NULL;
+ ret = -ENOENT;
+ goto out;
+ }
/*
* all events in a group must monitor
@@ -1641,6 +1645,8 @@
lockdep_assert_held(&ctx->mutex);
event->ctx = ctx;
+ if (event->cpu != -1)
+ event->cpu = cpu;
if (!task) {
/*
@@ -6248,6 +6254,8 @@
}
}
+ get_online_cpus();
+
event = perf_event_alloc(&attr, cpu, task, group_leader, NULL,
NULL, NULL);
if (IS_ERR(event)) {
@@ -6300,7 +6308,7 @@
/*
* Get the target context (task or percpu):
*/
- ctx = find_get_context(pmu, task, cpu);
+ ctx = find_get_context(pmu, task, event->cpu);
if (IS_ERR(ctx)) {
err = PTR_ERR(ctx);
goto err_alloc;
@@ -6373,20 +6381,23 @@
mutex_lock(&ctx->mutex);
if (move_group) {
- perf_install_in_context(ctx, group_leader, cpu);
+ synchronize_rcu();
+ perf_install_in_context(ctx, group_leader, event->cpu);
get_ctx(ctx);
list_for_each_entry(sibling, &group_leader->sibling_list,
group_entry) {
- perf_install_in_context(ctx, sibling, cpu);
+ perf_install_in_context(ctx, sibling, event->cpu);
get_ctx(ctx);
}
}
- perf_install_in_context(ctx, event, cpu);
+ perf_install_in_context(ctx, event, event->cpu);
++ctx->generation;
perf_unpin_context(ctx);
mutex_unlock(&ctx->mutex);
+ put_online_cpus();
+
event->owner = current;
mutex_lock(¤t->perf_event_mutex);
@@ -6415,6 +6426,7 @@
err_alloc:
free_event(event);
err_task:
+ put_online_cpus();
if (task)
put_task_struct(task);
err_group_fd:
@@ -6475,6 +6487,39 @@
}
EXPORT_SYMBOL_GPL(perf_event_create_kernel_counter);
+void perf_pmu_migrate_context(struct pmu *pmu, int src_cpu, int dst_cpu)
+{
+ struct perf_event_context *src_ctx;
+ struct perf_event_context *dst_ctx;
+ struct perf_event *event, *tmp;
+ LIST_HEAD(events);
+
+ src_ctx = &per_cpu_ptr(pmu->pmu_cpu_context, src_cpu)->ctx;
+ dst_ctx = &per_cpu_ptr(pmu->pmu_cpu_context, dst_cpu)->ctx;
+
+ mutex_lock(&src_ctx->mutex);
+ list_for_each_entry_safe(event, tmp, &src_ctx->event_list,
+ event_entry) {
+ perf_remove_from_context(event);
+ put_ctx(src_ctx);
+ list_add(&event->event_entry, &events);
+ }
+ mutex_unlock(&src_ctx->mutex);
+
+ synchronize_rcu();
+
+ mutex_lock(&dst_ctx->mutex);
+ list_for_each_entry_safe(event, tmp, &events, event_entry) {
+ list_del(&event->event_entry);
+ if (event->state >= PERF_EVENT_STATE_OFF)
+ event->state = PERF_EVENT_STATE_INACTIVE;
+ perf_install_in_context(dst_ctx, event, dst_cpu);
+ get_ctx(dst_ctx);
+ }
+ mutex_unlock(&dst_ctx->mutex);
+}
+EXPORT_SYMBOL_GPL(perf_pmu_migrate_context);
+
static void sync_child_event(struct perf_event *child_event,
struct task_struct *child)
{
diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index 985be4d..f935327 100644
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -38,13 +38,29 @@
#define UINSNS_PER_PAGE (PAGE_SIZE/UPROBE_XOL_SLOT_BYTES)
#define MAX_UPROBE_XOL_SLOTS UINSNS_PER_PAGE
-static struct srcu_struct uprobes_srcu;
static struct rb_root uprobes_tree = RB_ROOT;
static DEFINE_SPINLOCK(uprobes_treelock); /* serialize rbtree access */
#define UPROBES_HASH_SZ 13
+/*
+ * We need separate register/unregister and mmap/munmap lock hashes because
+ * of mmap_sem nesting.
+ *
+ * uprobe_register() needs to install probes on (potentially) all processes
+ * and thus needs to acquire multiple mmap_sems (consequtively, not
+ * concurrently), whereas uprobe_mmap() is called while holding mmap_sem
+ * for the particular process doing the mmap.
+ *
+ * uprobe_register()->register_for_each_vma() needs to drop/acquire mmap_sem
+ * because of lock order against i_mmap_mutex. This means there's a hole in
+ * the register vma iteration where a mmap() can happen.
+ *
+ * Thus uprobe_register() can race with uprobe_mmap() and we can try and
+ * install a probe where one is already installed.
+ */
+
/* serialize (un)register */
static struct mutex uprobes_mutex[UPROBES_HASH_SZ];
@@ -61,17 +77,6 @@
*/
static atomic_t uprobe_events = ATOMIC_INIT(0);
-/*
- * Maintain a temporary per vma info that can be used to search if a vma
- * has already been handled. This structure is introduced since extending
- * vm_area_struct wasnt recommended.
- */
-struct vma_info {
- struct list_head probe_list;
- struct mm_struct *mm;
- loff_t vaddr;
-};
-
struct uprobe {
struct rb_node rb_node; /* node in the rb tree */
atomic_t ref;
@@ -100,7 +105,8 @@
if (!is_register)
return true;
- if ((vma->vm_flags & (VM_READ|VM_WRITE|VM_EXEC|VM_SHARED)) == (VM_READ|VM_EXEC))
+ if ((vma->vm_flags & (VM_HUGETLB|VM_READ|VM_WRITE|VM_EXEC|VM_SHARED))
+ == (VM_READ|VM_EXEC))
return true;
return false;
@@ -129,33 +135,17 @@
static int __replace_page(struct vm_area_struct *vma, struct page *page, struct page *kpage)
{
struct mm_struct *mm = vma->vm_mm;
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *ptep;
- spinlock_t *ptl;
unsigned long addr;
- int err = -EFAULT;
+ spinlock_t *ptl;
+ pte_t *ptep;
addr = page_address_in_vma(page, vma);
if (addr == -EFAULT)
- goto out;
+ return -EFAULT;
- pgd = pgd_offset(mm, addr);
- if (!pgd_present(*pgd))
- goto out;
-
- pud = pud_offset(pgd, addr);
- if (!pud_present(*pud))
- goto out;
-
- pmd = pmd_offset(pud, addr);
- if (!pmd_present(*pmd))
- goto out;
-
- ptep = pte_offset_map_lock(mm, pmd, addr, &ptl);
+ ptep = page_check_address(page, mm, addr, &ptl, 0);
if (!ptep)
- goto out;
+ return -EAGAIN;
get_page(kpage);
page_add_new_anon_rmap(kpage, vma, addr);
@@ -174,10 +164,8 @@
try_to_free_swap(page);
put_page(page);
pte_unmap_unlock(ptep, ptl);
- err = 0;
-out:
- return err;
+ return 0;
}
/**
@@ -222,9 +210,8 @@
void *vaddr_old, *vaddr_new;
struct vm_area_struct *vma;
struct uprobe *uprobe;
- loff_t addr;
int ret;
-
+retry:
/* Read the page with vaddr into memory */
ret = get_user_pages(NULL, mm, vaddr, 1, 0, 0, &old_page, &vma);
if (ret <= 0)
@@ -246,10 +233,6 @@
if (mapping != vma->vm_file->f_mapping)
goto put_out;
- addr = vma_address(vma, uprobe->offset);
- if (vaddr != (unsigned long)addr)
- goto put_out;
-
ret = -ENOMEM;
new_page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma, vaddr);
if (!new_page)
@@ -267,11 +250,7 @@
vaddr_new = kmap_atomic(new_page);
memcpy(vaddr_new, vaddr_old, PAGE_SIZE);
-
- /* poke the new insn in, ASSUMES we don't cross page boundary */
- vaddr &= ~PAGE_MASK;
- BUG_ON(vaddr + UPROBE_SWBP_INSN_SIZE > PAGE_SIZE);
- memcpy(vaddr_new + vaddr, &opcode, UPROBE_SWBP_INSN_SIZE);
+ memcpy(vaddr_new + (vaddr & ~PAGE_MASK), &opcode, UPROBE_SWBP_INSN_SIZE);
kunmap_atomic(vaddr_new);
kunmap_atomic(vaddr_old);
@@ -291,6 +270,8 @@
put_out:
put_page(old_page);
+ if (unlikely(ret == -EAGAIN))
+ goto retry;
return ret;
}
@@ -312,7 +293,7 @@
void *vaddr_new;
int ret;
- ret = get_user_pages(NULL, mm, vaddr, 1, 0, 0, &page, NULL);
+ ret = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &page, NULL);
if (ret <= 0)
return ret;
@@ -333,10 +314,20 @@
uprobe_opcode_t opcode;
int result;
+ if (current->mm == mm) {
+ pagefault_disable();
+ result = __copy_from_user_inatomic(&opcode, (void __user*)vaddr,
+ sizeof(opcode));
+ pagefault_enable();
+
+ if (likely(result == 0))
+ goto out;
+ }
+
result = read_opcode(mm, vaddr, &opcode);
if (result)
return result;
-
+out:
if (is_swbp_insn(&opcode))
return 1;
@@ -355,7 +346,9 @@
int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr)
{
int result;
-
+ /*
+ * See the comment near uprobes_hash().
+ */
result = is_swbp_at_addr(mm, vaddr);
if (result == 1)
return -EEXIST;
@@ -520,7 +513,6 @@
uprobe->inode = igrab(inode);
uprobe->offset = offset;
init_rwsem(&uprobe->consumer_rwsem);
- INIT_LIST_HEAD(&uprobe->pending_list);
/* add to uprobes_tree, sorted on inode:offset */
cur_uprobe = insert_uprobe(uprobe);
@@ -588,20 +580,22 @@
}
static int
-__copy_insn(struct address_space *mapping, struct vm_area_struct *vma, char *insn,
- unsigned long nbytes, unsigned long offset)
+__copy_insn(struct address_space *mapping, struct file *filp, char *insn,
+ unsigned long nbytes, loff_t offset)
{
- struct file *filp = vma->vm_file;
struct page *page;
void *vaddr;
- unsigned long off1;
- unsigned long idx;
+ unsigned long off;
+ pgoff_t idx;
if (!filp)
return -EINVAL;
- idx = (unsigned long)(offset >> PAGE_CACHE_SHIFT);
- off1 = offset &= ~PAGE_MASK;
+ if (!mapping->a_ops->readpage)
+ return -EIO;
+
+ idx = offset >> PAGE_CACHE_SHIFT;
+ off = offset & ~PAGE_MASK;
/*
* Ensure that the page that has the original instruction is
@@ -612,22 +606,20 @@
return PTR_ERR(page);
vaddr = kmap_atomic(page);
- memcpy(insn, vaddr + off1, nbytes);
+ memcpy(insn, vaddr + off, nbytes);
kunmap_atomic(vaddr);
page_cache_release(page);
return 0;
}
-static int
-copy_insn(struct uprobe *uprobe, struct vm_area_struct *vma, unsigned long addr)
+static int copy_insn(struct uprobe *uprobe, struct file *filp)
{
struct address_space *mapping;
unsigned long nbytes;
int bytes;
- addr &= ~PAGE_MASK;
- nbytes = PAGE_SIZE - addr;
+ nbytes = PAGE_SIZE - (uprobe->offset & ~PAGE_MASK);
mapping = uprobe->inode->i_mapping;
/* Instruction at end of binary; copy only available bytes */
@@ -638,13 +630,13 @@
/* Instruction at the page-boundary; copy bytes in second page */
if (nbytes < bytes) {
- if (__copy_insn(mapping, vma, uprobe->arch.insn + nbytes,
- bytes - nbytes, uprobe->offset + nbytes))
- return -ENOMEM;
-
+ int err = __copy_insn(mapping, filp, uprobe->arch.insn + nbytes,
+ bytes - nbytes, uprobe->offset + nbytes);
+ if (err)
+ return err;
bytes = nbytes;
}
- return __copy_insn(mapping, vma, uprobe->arch.insn, bytes, uprobe->offset);
+ return __copy_insn(mapping, filp, uprobe->arch.insn, bytes, uprobe->offset);
}
/*
@@ -672,9 +664,8 @@
*/
static int
install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm,
- struct vm_area_struct *vma, loff_t vaddr)
+ struct vm_area_struct *vma, unsigned long vaddr)
{
- unsigned long addr;
int ret;
/*
@@ -687,20 +678,22 @@
if (!uprobe->consumers)
return -EEXIST;
- addr = (unsigned long)vaddr;
-
if (!(uprobe->flags & UPROBE_COPY_INSN)) {
- ret = copy_insn(uprobe, vma, addr);
+ ret = copy_insn(uprobe, vma->vm_file);
if (ret)
return ret;
if (is_swbp_insn((uprobe_opcode_t *)uprobe->arch.insn))
- return -EEXIST;
+ return -ENOTSUPP;
- ret = arch_uprobe_analyze_insn(&uprobe->arch, mm);
+ ret = arch_uprobe_analyze_insn(&uprobe->arch, mm, vaddr);
if (ret)
return ret;
+ /* write_opcode() assumes we don't cross page boundary */
+ BUG_ON((uprobe->offset & ~PAGE_MASK) +
+ UPROBE_SWBP_INSN_SIZE > PAGE_SIZE);
+
uprobe->flags |= UPROBE_COPY_INSN;
}
@@ -713,7 +706,7 @@
* Hence increment before and decrement on failure.
*/
atomic_inc(&mm->uprobes_state.count);
- ret = set_swbp(&uprobe->arch, mm, addr);
+ ret = set_swbp(&uprobe->arch, mm, vaddr);
if (ret)
atomic_dec(&mm->uprobes_state.count);
@@ -721,27 +714,21 @@
}
static void
-remove_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, loff_t vaddr)
+remove_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, unsigned long vaddr)
{
- if (!set_orig_insn(&uprobe->arch, mm, (unsigned long)vaddr, true))
+ if (!set_orig_insn(&uprobe->arch, mm, vaddr, true))
atomic_dec(&mm->uprobes_state.count);
}
/*
- * There could be threads that have hit the breakpoint and are entering the
- * notifier code and trying to acquire the uprobes_treelock. The thread
- * calling delete_uprobe() that is removing the uprobe from the rb_tree can
- * race with these threads and might acquire the uprobes_treelock compared
- * to some of the breakpoint hit threads. In such a case, the breakpoint
- * hit threads will not find the uprobe. The current unregistering thread
- * waits till all other threads have hit a breakpoint, to acquire the
- * uprobes_treelock before the uprobe is removed from the rbtree.
+ * There could be threads that have already hit the breakpoint. They
+ * will recheck the current insn and restart if find_uprobe() fails.
+ * See find_active_uprobe().
*/
static void delete_uprobe(struct uprobe *uprobe)
{
unsigned long flags;
- synchronize_srcu(&uprobes_srcu);
spin_lock_irqsave(&uprobes_treelock, flags);
rb_erase(&uprobe->rb_node, &uprobes_tree);
spin_unlock_irqrestore(&uprobes_treelock, flags);
@@ -750,139 +737,135 @@
atomic_dec(&uprobe_events);
}
-static struct vma_info *
-__find_next_vma_info(struct address_space *mapping, struct list_head *head,
- struct vma_info *vi, loff_t offset, bool is_register)
+struct map_info {
+ struct map_info *next;
+ struct mm_struct *mm;
+ unsigned long vaddr;
+};
+
+static inline struct map_info *free_map_info(struct map_info *info)
{
+ struct map_info *next = info->next;
+ kfree(info);
+ return next;
+}
+
+static struct map_info *
+build_map_info(struct address_space *mapping, loff_t offset, bool is_register)
+{
+ unsigned long pgoff = offset >> PAGE_SHIFT;
struct prio_tree_iter iter;
struct vm_area_struct *vma;
- struct vma_info *tmpvi;
- unsigned long pgoff;
- int existing_vma;
- loff_t vaddr;
+ struct map_info *curr = NULL;
+ struct map_info *prev = NULL;
+ struct map_info *info;
+ int more = 0;
- pgoff = offset >> PAGE_SHIFT;
-
+ again:
+ mutex_lock(&mapping->i_mmap_mutex);
vma_prio_tree_foreach(vma, &iter, &mapping->i_mmap, pgoff, pgoff) {
if (!valid_vma(vma, is_register))
continue;
- existing_vma = 0;
- vaddr = vma_address(vma, offset);
-
- list_for_each_entry(tmpvi, head, probe_list) {
- if (tmpvi->mm == vma->vm_mm && tmpvi->vaddr == vaddr) {
- existing_vma = 1;
- break;
- }
+ if (!prev && !more) {
+ /*
+ * Needs GFP_NOWAIT to avoid i_mmap_mutex recursion through
+ * reclaim. This is optimistic, no harm done if it fails.
+ */
+ prev = kmalloc(sizeof(struct map_info),
+ GFP_NOWAIT | __GFP_NOMEMALLOC | __GFP_NOWARN);
+ if (prev)
+ prev->next = NULL;
+ }
+ if (!prev) {
+ more++;
+ continue;
}
- /*
- * Another vma needs a probe to be installed. However skip
- * installing the probe if the vma is about to be unlinked.
- */
- if (!existing_vma && atomic_inc_not_zero(&vma->vm_mm->mm_users)) {
- vi->mm = vma->vm_mm;
- vi->vaddr = vaddr;
- list_add(&vi->probe_list, head);
+ if (!atomic_inc_not_zero(&vma->vm_mm->mm_users))
+ continue;
- return vi;
- }
+ info = prev;
+ prev = prev->next;
+ info->next = curr;
+ curr = info;
+
+ info->mm = vma->vm_mm;
+ info->vaddr = vma_address(vma, offset);
}
-
- return NULL;
-}
-
-/*
- * Iterate in the rmap prio tree and find a vma where a probe has not
- * yet been inserted.
- */
-static struct vma_info *
-find_next_vma_info(struct address_space *mapping, struct list_head *head,
- loff_t offset, bool is_register)
-{
- struct vma_info *vi, *retvi;
-
- vi = kzalloc(sizeof(struct vma_info), GFP_KERNEL);
- if (!vi)
- return ERR_PTR(-ENOMEM);
-
- mutex_lock(&mapping->i_mmap_mutex);
- retvi = __find_next_vma_info(mapping, head, vi, offset, is_register);
mutex_unlock(&mapping->i_mmap_mutex);
- if (!retvi)
- kfree(vi);
+ if (!more)
+ goto out;
- return retvi;
+ prev = curr;
+ while (curr) {
+ mmput(curr->mm);
+ curr = curr->next;
+ }
+
+ do {
+ info = kmalloc(sizeof(struct map_info), GFP_KERNEL);
+ if (!info) {
+ curr = ERR_PTR(-ENOMEM);
+ goto out;
+ }
+ info->next = prev;
+ prev = info;
+ } while (--more);
+
+ goto again;
+ out:
+ while (prev)
+ prev = free_map_info(prev);
+ return curr;
}
static int register_for_each_vma(struct uprobe *uprobe, bool is_register)
{
- struct list_head try_list;
- struct vm_area_struct *vma;
- struct address_space *mapping;
- struct vma_info *vi, *tmpvi;
- struct mm_struct *mm;
- loff_t vaddr;
- int ret;
+ struct map_info *info;
+ int err = 0;
- mapping = uprobe->inode->i_mapping;
- INIT_LIST_HEAD(&try_list);
+ info = build_map_info(uprobe->inode->i_mapping,
+ uprobe->offset, is_register);
+ if (IS_ERR(info))
+ return PTR_ERR(info);
- ret = 0;
+ while (info) {
+ struct mm_struct *mm = info->mm;
+ struct vm_area_struct *vma;
- for (;;) {
- vi = find_next_vma_info(mapping, &try_list, uprobe->offset, is_register);
- if (!vi)
- break;
+ if (err)
+ goto free;
- if (IS_ERR(vi)) {
- ret = PTR_ERR(vi);
- break;
- }
+ down_write(&mm->mmap_sem);
+ vma = find_vma(mm, (unsigned long)info->vaddr);
+ if (!vma || !valid_vma(vma, is_register))
+ goto unlock;
- mm = vi->mm;
- down_read(&mm->mmap_sem);
- vma = find_vma(mm, (unsigned long)vi->vaddr);
- if (!vma || !valid_vma(vma, is_register)) {
- list_del(&vi->probe_list);
- kfree(vi);
- up_read(&mm->mmap_sem);
- mmput(mm);
- continue;
- }
- vaddr = vma_address(vma, uprobe->offset);
if (vma->vm_file->f_mapping->host != uprobe->inode ||
- vaddr != vi->vaddr) {
- list_del(&vi->probe_list);
- kfree(vi);
- up_read(&mm->mmap_sem);
- mmput(mm);
- continue;
- }
+ vma_address(vma, uprobe->offset) != info->vaddr)
+ goto unlock;
- if (is_register)
- ret = install_breakpoint(uprobe, mm, vma, vi->vaddr);
- else
- remove_breakpoint(uprobe, mm, vi->vaddr);
-
- up_read(&mm->mmap_sem);
- mmput(mm);
if (is_register) {
- if (ret && ret == -EEXIST)
- ret = 0;
- if (ret)
- break;
+ err = install_breakpoint(uprobe, mm, vma, info->vaddr);
+ /*
+ * We can race against uprobe_mmap(), see the
+ * comment near uprobe_hash().
+ */
+ if (err == -EEXIST)
+ err = 0;
+ } else {
+ remove_breakpoint(uprobe, mm, info->vaddr);
}
+ unlock:
+ up_write(&mm->mmap_sem);
+ free:
+ mmput(mm);
+ info = free_map_info(info);
}
- list_for_each_entry_safe(vi, tmpvi, &try_list, probe_list) {
- list_del(&vi->probe_list);
- kfree(vi);
- }
-
- return ret;
+ return err;
}
static int __uprobe_register(struct uprobe *uprobe)
@@ -1048,7 +1031,7 @@
int uprobe_mmap(struct vm_area_struct *vma)
{
struct list_head tmp_list;
- struct uprobe *uprobe, *u;
+ struct uprobe *uprobe;
struct inode *inode;
int ret, count;
@@ -1066,12 +1049,9 @@
ret = 0;
count = 0;
- list_for_each_entry_safe(uprobe, u, &tmp_list, pending_list) {
- loff_t vaddr;
-
- list_del(&uprobe->pending_list);
+ list_for_each_entry(uprobe, &tmp_list, pending_list) {
if (!ret) {
- vaddr = vma_address(vma, uprobe->offset);
+ loff_t vaddr = vma_address(vma, uprobe->offset);
if (vaddr < vma->vm_start || vaddr >= vma->vm_end) {
put_uprobe(uprobe);
@@ -1079,8 +1059,10 @@
}
ret = install_breakpoint(uprobe, vma->vm_mm, vma, vaddr);
-
- /* Ignore double add: */
+ /*
+ * We can race against uprobe_register(), see the
+ * comment near uprobe_hash().
+ */
if (ret == -EEXIST) {
ret = 0;
@@ -1115,7 +1097,7 @@
void uprobe_munmap(struct vm_area_struct *vma, unsigned long start, unsigned long end)
{
struct list_head tmp_list;
- struct uprobe *uprobe, *u;
+ struct uprobe *uprobe;
struct inode *inode;
if (!atomic_read(&uprobe_events) || !valid_vma(vma, false))
@@ -1132,11 +1114,8 @@
mutex_lock(uprobes_mmap_hash(inode));
build_probe_list(inode, &tmp_list);
- list_for_each_entry_safe(uprobe, u, &tmp_list, pending_list) {
- loff_t vaddr;
-
- list_del(&uprobe->pending_list);
- vaddr = vma_address(vma, uprobe->offset);
+ list_for_each_entry(uprobe, &tmp_list, pending_list) {
+ loff_t vaddr = vma_address(vma, uprobe->offset);
if (vaddr >= start && vaddr < end) {
/*
@@ -1378,9 +1357,6 @@
{
struct uprobe_task *utask = t->utask;
- if (t->uprobe_srcu_id != -1)
- srcu_read_unlock_raw(&uprobes_srcu, t->uprobe_srcu_id);
-
if (!utask)
return;
@@ -1398,7 +1374,6 @@
void uprobe_copy_process(struct task_struct *t)
{
t->utask = NULL;
- t->uprobe_srcu_id = -1;
}
/*
@@ -1417,7 +1392,6 @@
if (unlikely(!utask))
return NULL;
- utask->active_uprobe = NULL;
current->utask = utask;
return utask;
}
@@ -1479,41 +1453,64 @@
return false;
}
+static struct uprobe *find_active_uprobe(unsigned long bp_vaddr, int *is_swbp)
+{
+ struct mm_struct *mm = current->mm;
+ struct uprobe *uprobe = NULL;
+ struct vm_area_struct *vma;
+
+ down_read(&mm->mmap_sem);
+ vma = find_vma(mm, bp_vaddr);
+ if (vma && vma->vm_start <= bp_vaddr) {
+ if (valid_vma(vma, false)) {
+ struct inode *inode;
+ loff_t offset;
+
+ inode = vma->vm_file->f_mapping->host;
+ offset = bp_vaddr - vma->vm_start;
+ offset += (vma->vm_pgoff << PAGE_SHIFT);
+ uprobe = find_uprobe(inode, offset);
+ }
+
+ if (!uprobe)
+ *is_swbp = is_swbp_at_addr(mm, bp_vaddr);
+ } else {
+ *is_swbp = -EFAULT;
+ }
+ up_read(&mm->mmap_sem);
+
+ return uprobe;
+}
+
/*
* Run handler and ask thread to singlestep.
* Ensure all non-fatal signals cannot interrupt thread while it singlesteps.
*/
static void handle_swbp(struct pt_regs *regs)
{
- struct vm_area_struct *vma;
struct uprobe_task *utask;
struct uprobe *uprobe;
- struct mm_struct *mm;
unsigned long bp_vaddr;
+ int uninitialized_var(is_swbp);
- uprobe = NULL;
bp_vaddr = uprobe_get_swbp_addr(regs);
- mm = current->mm;
- down_read(&mm->mmap_sem);
- vma = find_vma(mm, bp_vaddr);
-
- if (vma && vma->vm_start <= bp_vaddr && valid_vma(vma, false)) {
- struct inode *inode;
- loff_t offset;
-
- inode = vma->vm_file->f_mapping->host;
- offset = bp_vaddr - vma->vm_start;
- offset += (vma->vm_pgoff << PAGE_SHIFT);
- uprobe = find_uprobe(inode, offset);
- }
-
- srcu_read_unlock_raw(&uprobes_srcu, current->uprobe_srcu_id);
- current->uprobe_srcu_id = -1;
- up_read(&mm->mmap_sem);
+ uprobe = find_active_uprobe(bp_vaddr, &is_swbp);
if (!uprobe) {
- /* No matching uprobe; signal SIGTRAP. */
- send_sig(SIGTRAP, current, 0);
+ if (is_swbp > 0) {
+ /* No matching uprobe; signal SIGTRAP. */
+ send_sig(SIGTRAP, current, 0);
+ } else {
+ /*
+ * Either we raced with uprobe_unregister() or we can't
+ * access this memory. The latter is only possible if
+ * another thread plays with our ->mm. In both cases
+ * we can simply restart. If this vma was unmapped we
+ * can pretend this insn was not executed yet and get
+ * the (correct) SIGSEGV after restart.
+ */
+ instruction_pointer_set(regs, bp_vaddr);
+ }
return;
}
@@ -1620,7 +1617,6 @@
utask->state = UTASK_BP_HIT;
set_thread_flag(TIF_UPROBE);
- current->uprobe_srcu_id = srcu_read_lock_raw(&uprobes_srcu);
return 1;
}
@@ -1655,7 +1651,6 @@
mutex_init(&uprobes_mutex[i]);
mutex_init(&uprobes_mmap_mutex[i]);
}
- init_srcu_struct(&uprobes_srcu);
return register_die_notifier(&uprobe_exception_nb);
}
diff --git a/kernel/exit.c b/kernel/exit.c
index 34867cc..d17f6c4 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -72,6 +72,18 @@
list_del_rcu(&p->tasks);
list_del_init(&p->sibling);
__this_cpu_dec(process_counts);
+ /*
+ * If we are the last child process in a pid namespace to be
+ * reaped, notify the reaper sleeping zap_pid_ns_processes().
+ */
+ if (IS_ENABLED(CONFIG_PID_NS)) {
+ struct task_struct *parent = p->real_parent;
+
+ if ((task_active_pid_ns(parent)->child_reaper == parent) &&
+ list_empty(&parent->children) &&
+ (parent->flags & PF_EXITING))
+ wake_up_process(parent);
+ }
}
list_del_rcu(&p->thread_group);
}
@@ -643,6 +655,7 @@
mm_release(tsk, mm);
if (!mm)
return;
+ sync_mm_rss(mm);
/*
* Serialize with any possible pending coredump.
* We must hold mmap_sem around checking core_state
@@ -719,12 +732,6 @@
zap_pid_ns_processes(pid_ns);
write_lock_irq(&tasklist_lock);
- /*
- * We can not clear ->child_reaper or leave it alone.
- * There may by stealth EXIT_DEAD tasks on ->children,
- * forget_original_parent() must move them somewhere.
- */
- pid_ns->child_reaper = init_pid_ns.child_reaper;
} else if (father->signal->has_child_subreaper) {
struct task_struct *reaper;
@@ -946,14 +953,11 @@
exit_signals(tsk); /* sets PF_EXITING */
/*
* tsk->flags are checked in the futex code to protect against
- * an exiting task cleaning up the robust pi futexes, and in
- * task_work_add() to avoid the race with exit_task_work().
+ * an exiting task cleaning up the robust pi futexes.
*/
smp_mb();
raw_spin_unlock_wait(&tsk->pi_lock);
- exit_task_work(tsk);
-
if (unlikely(in_atomic()))
printk(KERN_INFO "note: %s[%d] exited with preempt_count %d\n",
current->comm, task_pid_nr(current),
@@ -988,6 +992,7 @@
exit_shm(tsk);
exit_files(tsk);
exit_fs(tsk);
+ exit_task_work(tsk);
check_stack_usage();
exit_thread();
diff --git a/kernel/fork.c b/kernel/fork.c
index ab5211b..ff1cad3 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -304,12 +304,17 @@
}
err = arch_dup_task_struct(tsk, orig);
+
+ /*
+ * We defer looking at err, because we will need this setup
+ * for the clean up path to work correctly.
+ */
+ tsk->stack = ti;
+ setup_thread_stack(tsk, orig);
+
if (err)
goto out;
- tsk->stack = ti;
-
- setup_thread_stack(tsk, orig);
clear_user_return_notifier(tsk);
clear_tsk_need_resched(tsk);
stackend = end_of_stack(tsk);
@@ -1415,7 +1420,7 @@
*/
p->group_leader = p;
INIT_LIST_HEAD(&p->thread_group);
- INIT_HLIST_HEAD(&p->task_works);
+ p->task_works = NULL;
/* Now that the task is set up, run cgroup callbacks if
* necessary. We need to run them before the task is visible
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index ae34bf5..6db7a5e 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -657,6 +657,14 @@
return 0;
}
+static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base)
+{
+ ktime_t *offs_real = &base->clock_base[HRTIMER_BASE_REALTIME].offset;
+ ktime_t *offs_boot = &base->clock_base[HRTIMER_BASE_BOOTTIME].offset;
+
+ return ktime_get_update_offsets(offs_real, offs_boot);
+}
+
/*
* Retrigger next event is called after clock was set
*
@@ -665,22 +673,12 @@
static void retrigger_next_event(void *arg)
{
struct hrtimer_cpu_base *base = &__get_cpu_var(hrtimer_bases);
- struct timespec realtime_offset, xtim, wtm, sleep;
if (!hrtimer_hres_active())
return;
- /* Optimized out for !HIGH_RES */
- get_xtime_and_monotonic_and_sleep_offset(&xtim, &wtm, &sleep);
- set_normalized_timespec(&realtime_offset, -wtm.tv_sec, -wtm.tv_nsec);
-
- /* Adjust CLOCK_REALTIME offset */
raw_spin_lock(&base->lock);
- base->clock_base[HRTIMER_BASE_REALTIME].offset =
- timespec_to_ktime(realtime_offset);
- base->clock_base[HRTIMER_BASE_BOOTTIME].offset =
- timespec_to_ktime(sleep);
-
+ hrtimer_update_base(base);
hrtimer_force_reprogram(base, 0);
raw_spin_unlock(&base->lock);
}
@@ -710,13 +708,25 @@
base->clock_base[i].resolution = KTIME_HIGH_RES;
tick_setup_sched_timer();
-
/* "Retrigger" the interrupt to get things going */
retrigger_next_event(NULL);
local_irq_restore(flags);
return 1;
}
+/*
+ * Called from timekeeping code to reprogramm the hrtimer interrupt
+ * device. If called from the timer interrupt context we defer it to
+ * softirq context.
+ */
+void clock_was_set_delayed(void)
+{
+ struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
+
+ cpu_base->clock_was_set = 1;
+ __raise_softirq_irqoff(HRTIMER_SOFTIRQ);
+}
+
#else
static inline int hrtimer_hres_active(void) { return 0; }
@@ -1250,11 +1260,10 @@
cpu_base->nr_events++;
dev->next_event.tv64 = KTIME_MAX;
- entry_time = now = ktime_get();
+ raw_spin_lock(&cpu_base->lock);
+ entry_time = now = hrtimer_update_base(cpu_base);
retry:
expires_next.tv64 = KTIME_MAX;
-
- raw_spin_lock(&cpu_base->lock);
/*
* We set expires_next to KTIME_MAX here with cpu_base->lock
* held to prevent that a timer is enqueued in our queue via
@@ -1330,8 +1339,12 @@
* We need to prevent that we loop forever in the hrtimer
* interrupt routine. We give it 3 attempts to avoid
* overreacting on some spurious event.
+ *
+ * Acquire base lock for updating the offsets and retrieving
+ * the current time.
*/
- now = ktime_get();
+ raw_spin_lock(&cpu_base->lock);
+ now = hrtimer_update_base(cpu_base);
cpu_base->nr_retries++;
if (++retries < 3)
goto retry;
@@ -1343,6 +1356,7 @@
*/
cpu_base->nr_hangs++;
cpu_base->hang_detected = 1;
+ raw_spin_unlock(&cpu_base->lock);
delta = ktime_sub(now, entry_time);
if (delta.tv64 > cpu_base->max_hang_time.tv64)
cpu_base->max_hang_time = delta;
@@ -1395,6 +1409,13 @@
static void run_hrtimer_softirq(struct softirq_action *h)
{
+ struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
+
+ if (cpu_base->clock_was_set) {
+ cpu_base->clock_was_set = 0;
+ clock_was_set();
+ }
+
hrtimer_peek_ahead_timers();
}
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 8c54823..814c9ef 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -781,7 +781,7 @@
wake_up(&desc->wait_for_threads);
}
-static void irq_thread_dtor(struct task_work *unused)
+static void irq_thread_dtor(struct callback_head *unused)
{
struct task_struct *tsk = current;
struct irq_desc *desc;
@@ -813,7 +813,7 @@
*/
static int irq_thread(void *data)
{
- struct task_work on_exit_work;
+ struct callback_head on_exit_work;
static const struct sched_param param = {
.sched_priority = MAX_USER_RT_PRIO/2,
};
@@ -830,7 +830,7 @@
sched_setscheduler(current, SCHED_FIFO, ¶m);
- init_task_work(&on_exit_work, irq_thread_dtor, NULL);
+ init_task_work(&on_exit_work, irq_thread_dtor);
task_work_add(current, &on_exit_work, false);
while (!irq_wait_for_interrupt(action)) {
diff --git a/kernel/panic.c b/kernel/panic.c
index 8ed89a1..d2a5f4e 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -27,7 +27,7 @@
#define PANIC_TIMER_STEP 100
#define PANIC_BLINK_SPD 18
-int panic_on_oops;
+int panic_on_oops = CONFIG_PANIC_ON_OOPS_VALUE;
static unsigned long tainted_mask;
static int pause_on_oops;
static int pause_on_oops_flag;
@@ -108,8 +108,6 @@
*/
crash_kexec(NULL);
- kmsg_dump(KMSG_DUMP_PANIC);
-
/*
* Note smp_send_stop is the usual smp shutdown function, which
* unfortunately means it may not be hardened to work in a panic
@@ -117,6 +115,8 @@
*/
smp_send_stop();
+ kmsg_dump(KMSG_DUMP_PANIC);
+
atomic_notifier_call_chain(&panic_notifier_list, 0, buf);
bust_spinlocks(0);
diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index 16b20e3..b3c7fd5 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -184,11 +184,31 @@
}
read_unlock(&tasklist_lock);
+ /* Firstly reap the EXIT_ZOMBIE children we may have. */
do {
clear_thread_flag(TIF_SIGPENDING);
rc = sys_wait4(-1, NULL, __WALL, NULL);
} while (rc != -ECHILD);
+ /*
+ * sys_wait4() above can't reap the TASK_DEAD children.
+ * Make sure they all go away, see __unhash_process().
+ */
+ for (;;) {
+ bool need_wait = false;
+
+ read_lock(&tasklist_lock);
+ if (!list_empty(¤t->children)) {
+ __set_current_state(TASK_UNINTERRUPTIBLE);
+ need_wait = true;
+ }
+ read_unlock(&tasklist_lock);
+
+ if (!need_wait)
+ break;
+ schedule();
+ }
+
if (pid_ns->reboot)
current->signal->group_exit_code = pid_ns->reboot;
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 8f9b4eb..a70518c 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -175,7 +175,7 @@
You probably want to have your system's RTC driver statically
linked, ensuring that it's available when this test runs.
-config CAN_PM_TRACE
+config PM_SLEEP_DEBUG
def_bool y
depends on PM_DEBUG && PM_SLEEP
@@ -196,7 +196,7 @@
config PM_TRACE_RTC
bool "Suspend/resume event tracing"
- depends on CAN_PM_TRACE
+ depends on PM_SLEEP_DEBUG
depends on X86
select PM_TRACE
---help---
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 8b53db3..b26f5f1 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -5,6 +5,7 @@
* Copyright (c) 2003 Open Source Development Lab
* Copyright (c) 2004 Pavel Machek <pavel@ucw.cz>
* Copyright (c) 2009 Rafael J. Wysocki, Novell Inc.
+ * Copyright (C) 2012 Bojan Smojver <bojan@rexursive.com>
*
* This file is released under the GPLv2.
*/
@@ -27,7 +28,6 @@
#include <linux/syscore_ops.h>
#include <linux/ctype.h>
#include <linux/genhd.h>
-#include <scsi/scsi_scan.h>
#include "power.h"
@@ -46,6 +46,9 @@
HIBERNATION_PLATFORM,
HIBERNATION_SHUTDOWN,
HIBERNATION_REBOOT,
+#ifdef CONFIG_SUSPEND
+ HIBERNATION_SUSPEND,
+#endif
/* keep last */
__HIBERNATION_AFTER_LAST
};
@@ -354,6 +357,7 @@
}
suspend_console();
+ ftrace_stop();
pm_restrict_gfp_mask();
error = dpm_suspend(PMSG_FREEZE);
@@ -379,6 +383,7 @@
if (error || !in_suspend)
pm_restore_gfp_mask();
+ ftrace_start();
resume_console();
dpm_complete(msg);
@@ -481,6 +486,7 @@
pm_prepare_console();
suspend_console();
+ ftrace_stop();
pm_restrict_gfp_mask();
error = dpm_suspend_start(PMSG_QUIESCE);
if (!error) {
@@ -488,6 +494,7 @@
dpm_resume_end(PMSG_RECOVER);
}
pm_restore_gfp_mask();
+ ftrace_start();
resume_console();
pm_restore_console();
return error;
@@ -514,6 +521,7 @@
entering_platform_hibernation = true;
suspend_console();
+ ftrace_stop();
error = dpm_suspend_start(PMSG_HIBERNATE);
if (error) {
if (hibernation_ops->recover)
@@ -557,6 +565,7 @@
Resume_devices:
entering_platform_hibernation = false;
dpm_resume_end(PMSG_RESTORE);
+ ftrace_start();
resume_console();
Close:
@@ -574,6 +583,10 @@
*/
static void power_down(void)
{
+#ifdef CONFIG_SUSPEND
+ int error;
+#endif
+
switch (hibernation_mode) {
case HIBERNATION_REBOOT:
kernel_restart(NULL);
@@ -583,6 +596,25 @@
case HIBERNATION_SHUTDOWN:
kernel_power_off();
break;
+#ifdef CONFIG_SUSPEND
+ case HIBERNATION_SUSPEND:
+ error = suspend_devices_and_enter(PM_SUSPEND_MEM);
+ if (error) {
+ if (hibernation_ops)
+ hibernation_mode = HIBERNATION_PLATFORM;
+ else
+ hibernation_mode = HIBERNATION_SHUTDOWN;
+ power_down();
+ }
+ /*
+ * Restore swap signature.
+ */
+ error = swsusp_unmark();
+ if (error)
+ printk(KERN_ERR "PM: Swap will be unusable! "
+ "Try swapon -a.\n");
+ return;
+#endif
}
kernel_halt();
/*
@@ -748,13 +780,6 @@
async_synchronize_full();
}
- /*
- * We can't depend on SCSI devices being available after loading
- * one of their modules until scsi_complete_async_scans() is
- * called and the resume device usually is a SCSI one.
- */
- scsi_complete_async_scans();
-
swsusp_resume_device = name_to_dev_t(resume_file);
if (!swsusp_resume_device) {
error = -ENODEV;
@@ -827,6 +852,9 @@
[HIBERNATION_PLATFORM] = "platform",
[HIBERNATION_SHUTDOWN] = "shutdown",
[HIBERNATION_REBOOT] = "reboot",
+#ifdef CONFIG_SUSPEND
+ [HIBERNATION_SUSPEND] = "suspend",
+#endif
};
/*
@@ -867,6 +895,9 @@
switch (i) {
case HIBERNATION_SHUTDOWN:
case HIBERNATION_REBOOT:
+#ifdef CONFIG_SUSPEND
+ case HIBERNATION_SUSPEND:
+#endif
break;
case HIBERNATION_PLATFORM:
if (hibernation_ops)
@@ -907,6 +938,9 @@
switch (mode) {
case HIBERNATION_SHUTDOWN:
case HIBERNATION_REBOOT:
+#ifdef CONFIG_SUSPEND
+ case HIBERNATION_SUSPEND:
+#endif
hibernation_mode = mode;
break;
case HIBERNATION_PLATFORM:
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 428f8a0..f458238 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -235,6 +235,47 @@
#endif /* CONFIG_PM_SLEEP */
+#ifdef CONFIG_PM_SLEEP_DEBUG
+/*
+ * pm_print_times: print time taken by devices to suspend and resume.
+ *
+ * show() returns whether printing of suspend and resume times is enabled.
+ * store() accepts 0 or 1. 0 disables printing and 1 enables it.
+ */
+bool pm_print_times_enabled;
+
+static ssize_t pm_print_times_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", pm_print_times_enabled);
+}
+
+static ssize_t pm_print_times_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t n)
+{
+ unsigned long val;
+
+ if (kstrtoul(buf, 10, &val))
+ return -EINVAL;
+
+ if (val > 1)
+ return -EINVAL;
+
+ pm_print_times_enabled = !!val;
+ return n;
+}
+
+power_attr(pm_print_times);
+
+static inline void pm_print_times_init(void)
+{
+ pm_print_times_enabled = !!initcall_debug;
+}
+#else /* !CONFIG_PP_SLEEP_DEBUG */
+static inline void pm_print_times_init(void) {}
+#endif /* CONFIG_PM_SLEEP_DEBUG */
+
struct kobject *power_kobj;
/**
@@ -531,6 +572,9 @@
#ifdef CONFIG_PM_DEBUG
&pm_test_attr.attr,
#endif
+#ifdef CONFIG_PM_SLEEP_DEBUG
+ &pm_print_times_attr.attr,
+#endif
#endif
NULL,
};
@@ -566,6 +610,7 @@
error = sysfs_create_group(power_kobj, &attr_group);
if (error)
return error;
+ pm_print_times_init();
return pm_autosleep_init();
}
diff --git a/kernel/power/power.h b/kernel/power/power.h
index b0bd4be..7d4b7ff 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -156,6 +156,9 @@
extern int swsusp_read(unsigned int *flags_p);
extern int swsusp_write(unsigned int flags);
extern void swsusp_close(fmode_t);
+#ifdef CONFIG_SUSPEND
+extern int swsusp_unmark(void);
+#endif
/* kernel/power/block_io.c */
extern struct block_device *hib_resume_bdev;
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index 396d262..c8b7446 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -24,6 +24,7 @@
#include <linux/export.h>
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
+#include <linux/ftrace.h>
#include <trace/events/power.h>
#include "power.h"
@@ -212,6 +213,7 @@
goto Close;
}
suspend_console();
+ ftrace_stop();
suspend_test_start();
error = dpm_suspend_start(PMSG_SUSPEND);
if (error) {
@@ -231,6 +233,7 @@
suspend_test_start();
dpm_resume_end(PMSG_RESUME);
suspend_test_finish("resume devices");
+ ftrace_start();
resume_console();
Close:
if (suspend_ops->end)
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index 11e22c0..3c9d764 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -448,9 +448,9 @@
struct timeval start;
struct timeval stop;
- printk(KERN_INFO "PM: Saving image data pages (%u pages) ... ",
+ printk(KERN_INFO "PM: Saving image data pages (%u pages)...\n",
nr_to_write);
- m = nr_to_write / 100;
+ m = nr_to_write / 10;
if (!m)
m = 1;
nr_pages = 0;
@@ -464,7 +464,8 @@
if (ret)
break;
if (!(nr_pages % m))
- printk(KERN_CONT "\b\b\b\b%3d%%", nr_pages / m);
+ printk(KERN_INFO "PM: Image saving progress: %3d%%\n",
+ nr_pages / m * 10);
nr_pages++;
}
err2 = hib_wait_on_bio_chain(&bio);
@@ -472,9 +473,7 @@
if (!ret)
ret = err2;
if (!ret)
- printk(KERN_CONT "\b\b\b\bdone\n");
- else
- printk(KERN_CONT "\n");
+ printk(KERN_INFO "PM: Image saving done.\n");
swsusp_show_speed(&start, &stop, nr_to_write, "Wrote");
return ret;
}
@@ -668,9 +667,9 @@
printk(KERN_INFO
"PM: Using %u thread(s) for compression.\n"
- "PM: Compressing and saving image data (%u pages) ... ",
+ "PM: Compressing and saving image data (%u pages)...\n",
nr_threads, nr_to_write);
- m = nr_to_write / 100;
+ m = nr_to_write / 10;
if (!m)
m = 1;
nr_pages = 0;
@@ -690,8 +689,10 @@
data_of(*snapshot), PAGE_SIZE);
if (!(nr_pages % m))
- printk(KERN_CONT "\b\b\b\b%3d%%",
- nr_pages / m);
+ printk(KERN_INFO
+ "PM: Image saving progress: "
+ "%3d%%\n",
+ nr_pages / m * 10);
nr_pages++;
}
if (!off)
@@ -761,11 +762,8 @@
do_gettimeofday(&stop);
if (!ret)
ret = err2;
- if (!ret) {
- printk(KERN_CONT "\b\b\b\bdone\n");
- } else {
- printk(KERN_CONT "\n");
- }
+ if (!ret)
+ printk(KERN_INFO "PM: Image saving done.\n");
swsusp_show_speed(&start, &stop, nr_to_write, "Wrote");
out_clean:
if (crc) {
@@ -973,9 +971,9 @@
int err2;
unsigned nr_pages;
- printk(KERN_INFO "PM: Loading image data pages (%u pages) ... ",
+ printk(KERN_INFO "PM: Loading image data pages (%u pages)...\n",
nr_to_read);
- m = nr_to_read / 100;
+ m = nr_to_read / 10;
if (!m)
m = 1;
nr_pages = 0;
@@ -993,7 +991,8 @@
if (ret)
break;
if (!(nr_pages % m))
- printk("\b\b\b\b%3d%%", nr_pages / m);
+ printk(KERN_INFO "PM: Image loading progress: %3d%%\n",
+ nr_pages / m * 10);
nr_pages++;
}
err2 = hib_wait_on_bio_chain(&bio);
@@ -1001,12 +1000,11 @@
if (!ret)
ret = err2;
if (!ret) {
- printk("\b\b\b\bdone\n");
+ printk(KERN_INFO "PM: Image loading done.\n");
snapshot_write_finalize(snapshot);
if (!snapshot_image_loaded(snapshot))
ret = -ENODATA;
- } else
- printk("\n");
+ }
swsusp_show_speed(&start, &stop, nr_to_read, "Read");
return ret;
}
@@ -1185,9 +1183,9 @@
printk(KERN_INFO
"PM: Using %u thread(s) for decompression.\n"
- "PM: Loading and decompressing image data (%u pages) ... ",
+ "PM: Loading and decompressing image data (%u pages)...\n",
nr_threads, nr_to_read);
- m = nr_to_read / 100;
+ m = nr_to_read / 10;
if (!m)
m = 1;
nr_pages = 0;
@@ -1319,7 +1317,10 @@
data[thr].unc + off, PAGE_SIZE);
if (!(nr_pages % m))
- printk("\b\b\b\b%3d%%", nr_pages / m);
+ printk(KERN_INFO
+ "PM: Image loading progress: "
+ "%3d%%\n",
+ nr_pages / m * 10);
nr_pages++;
ret = snapshot_write_next(snapshot);
@@ -1344,7 +1345,7 @@
}
do_gettimeofday(&stop);
if (!ret) {
- printk("\b\b\b\bdone\n");
+ printk(KERN_INFO "PM: Image loading done.\n");
snapshot_write_finalize(snapshot);
if (!snapshot_image_loaded(snapshot))
ret = -ENODATA;
@@ -1357,8 +1358,7 @@
}
}
}
- } else
- printk("\n");
+ }
swsusp_show_speed(&start, &stop, nr_to_read, "Read");
out_clean:
for (i = 0; i < ring_size; i++)
@@ -1472,6 +1472,34 @@
blkdev_put(hib_resume_bdev, mode);
}
+/**
+ * swsusp_unmark - Unmark swsusp signature in the resume device
+ */
+
+#ifdef CONFIG_SUSPEND
+int swsusp_unmark(void)
+{
+ int error;
+
+ hib_bio_read_page(swsusp_resume_block, swsusp_header, NULL);
+ if (!memcmp(HIBERNATE_SIG,swsusp_header->sig, 10)) {
+ memcpy(swsusp_header->sig,swsusp_header->orig_sig, 10);
+ error = hib_bio_write_page(swsusp_resume_block,
+ swsusp_header, NULL);
+ } else {
+ printk(KERN_ERR "PM: Cannot find swsusp signature!\n");
+ error = -ENODEV;
+ }
+
+ /*
+ * We just returned from suspend, we don't need the image any more.
+ */
+ free_all_swap_pages(root_swap);
+
+ return error;
+}
+#endif
+
static int swsusp_header_init(void)
{
swsusp_header = (struct swsusp_header*) __get_free_page(GFP_KERNEL);
diff --git a/kernel/power/user.c b/kernel/power/user.c
index 91b0fd0..4ed81e7 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -24,7 +24,6 @@
#include <linux/console.h>
#include <linux/cpu.h>
#include <linux/freezer.h>
-#include <scsi/scsi_scan.h>
#include <asm/uaccess.h>
@@ -84,7 +83,6 @@
* appear.
*/
wait_for_device_probe();
- scsi_complete_async_scans();
data->swap = -1;
data->mode = O_WRONLY;
diff --git a/kernel/power/wakelock.c b/kernel/power/wakelock.c
index c8fba33..8f50de3 100644
--- a/kernel/power/wakelock.c
+++ b/kernel/power/wakelock.c
@@ -9,6 +9,7 @@
* manipulate wakelocks on Android.
*/
+#include <linux/capability.h>
#include <linux/ctype.h>
#include <linux/device.h>
#include <linux/err.h>
@@ -188,6 +189,9 @@
size_t len;
int ret = 0;
+ if (!capable(CAP_BLOCK_SUSPEND))
+ return -EPERM;
+
while (*str && !isspace(*str))
str++;
@@ -231,6 +235,9 @@
size_t len;
int ret = 0;
+ if (!capable(CAP_BLOCK_SUSPEND))
+ return -EPERM;
+
len = strlen(buf);
if (!len)
return -EINVAL;
diff --git a/kernel/printk.c b/kernel/printk.c
index 32462d2..ac4bc9e 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -193,12 +193,21 @@
* separated by ',', and find the message after the ';' character.
*/
+enum log_flags {
+ LOG_NOCONS = 1, /* already flushed, do not print to console */
+ LOG_NEWLINE = 2, /* text ended with a newline */
+ LOG_PREFIX = 4, /* text started with a prefix */
+ LOG_CONT = 8, /* text is a fragment of a continuation line */
+};
+
struct log {
u64 ts_nsec; /* timestamp in nanoseconds */
u16 len; /* length of entire record */
u16 text_len; /* length of text buffer */
u16 dict_len; /* length of dictionary buffer */
- u16 level; /* syslog level + facility */
+ u8 facility; /* syslog facility */
+ u8 flags:5; /* internal record flags */
+ u8 level:3; /* syslog level */
};
/*
@@ -210,6 +219,8 @@
/* the next printk record to read by syslog(READ) or /proc/kmsg */
static u64 syslog_seq;
static u32 syslog_idx;
+static enum log_flags syslog_prev;
+static size_t syslog_partial;
/* index and sequence number of the first record stored in the buffer */
static u64 log_first_seq;
@@ -227,10 +238,10 @@
#define LOG_LINE_MAX 1024
/* record buffer */
-#if !defined(CONFIG_64BIT) || defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
+#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
#define LOG_ALIGN 4
#else
-#define LOG_ALIGN 8
+#define LOG_ALIGN __alignof__(struct log)
#endif
#define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT)
static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN);
@@ -286,6 +297,7 @@
/* insert record into the buffer, discard old ones, update heads */
static void log_store(int facility, int level,
+ enum log_flags flags, u64 ts_nsec,
const char *dict, u16 dict_len,
const char *text, u16 text_len)
{
@@ -329,8 +341,13 @@
msg->text_len = text_len;
memcpy(log_dict(msg), dict, dict_len);
msg->dict_len = dict_len;
- msg->level = (facility << 3) | (level & 7);
- msg->ts_nsec = local_clock();
+ msg->facility = facility;
+ msg->level = level & 7;
+ msg->flags = flags & 0x1f;
+ if (ts_nsec > 0)
+ msg->ts_nsec = ts_nsec;
+ else
+ msg->ts_nsec = local_clock();
memset(log_dict(msg) + dict_len, 0, pad_len);
msg->len = sizeof(struct log) + text_len + dict_len + pad_len;
@@ -414,21 +431,23 @@
if (!user)
return -EBADF;
- mutex_lock(&user->lock);
- raw_spin_lock(&logbuf_lock);
+ ret = mutex_lock_interruptible(&user->lock);
+ if (ret)
+ return ret;
+ raw_spin_lock_irq(&logbuf_lock);
while (user->seq == log_next_seq) {
if (file->f_flags & O_NONBLOCK) {
ret = -EAGAIN;
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
goto out;
}
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
ret = wait_event_interruptible(log_wait,
user->seq != log_next_seq);
if (ret)
goto out;
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
}
if (user->seq < log_first_seq) {
@@ -436,7 +455,7 @@
user->idx = log_first_idx;
user->seq = log_first_seq;
ret = -EPIPE;
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
goto out;
}
@@ -444,13 +463,13 @@
ts_usec = msg->ts_nsec;
do_div(ts_usec, 1000);
len = sprintf(user->buf, "%u,%llu,%llu;",
- msg->level, user->seq, ts_usec);
+ (msg->facility << 3) | msg->level, user->seq, ts_usec);
/* escape non-printable characters */
for (i = 0; i < msg->text_len; i++) {
unsigned char c = log_text(msg)[i];
- if (c < ' ' || c >= 128)
+ if (c < ' ' || c >= 127 || c == '\\')
len += sprintf(user->buf + len, "\\x%02x", c);
else
user->buf[len++] = c;
@@ -474,7 +493,7 @@
continue;
}
- if (c < ' ' || c >= 128) {
+ if (c < ' ' || c >= 127 || c == '\\') {
len += sprintf(user->buf + len, "\\x%02x", c);
continue;
}
@@ -486,7 +505,7 @@
user->idx = log_next(user->idx);
user->seq++;
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
if (len > count) {
ret = -EINVAL;
@@ -513,7 +532,7 @@
if (offset)
return -ESPIPE;
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
switch (whence) {
case SEEK_SET:
/* the first record */
@@ -537,7 +556,7 @@
default:
ret = -EINVAL;
}
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
return ret;
}
@@ -551,14 +570,14 @@
poll_wait(file, &log_wait, wait);
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
if (user->seq < log_next_seq) {
/* return error when data has vanished underneath us */
if (user->seq < log_first_seq)
ret = POLLIN|POLLRDNORM|POLLERR|POLLPRI;
ret = POLLIN|POLLRDNORM;
}
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
return ret;
}
@@ -582,10 +601,10 @@
mutex_init(&user->lock);
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
user->idx = log_first_idx;
user->seq = log_first_seq;
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
file->private_data = user;
return 0;
@@ -785,44 +804,64 @@
#endif
module_param_named(time, printk_time, bool, S_IRUGO | S_IWUSR);
+static size_t print_time(u64 ts, char *buf)
+{
+ unsigned long rem_nsec;
+
+ if (!printk_time)
+ return 0;
+
+ if (!buf)
+ return 15;
+
+ rem_nsec = do_div(ts, 1000000000);
+ return sprintf(buf, "[%5lu.%06lu] ",
+ (unsigned long)ts, rem_nsec / 1000);
+}
+
static size_t print_prefix(const struct log *msg, bool syslog, char *buf)
{
size_t len = 0;
+ unsigned int prefix = (msg->facility << 3) | msg->level;
if (syslog) {
if (buf) {
- len += sprintf(buf, "<%u>", msg->level);
+ len += sprintf(buf, "<%u>", prefix);
} else {
len += 3;
- if (msg->level > 9)
- len++;
- if (msg->level > 99)
+ if (prefix > 999)
+ len += 3;
+ else if (prefix > 99)
+ len += 2;
+ else if (prefix > 9)
len++;
}
}
- if (printk_time) {
- if (buf) {
- unsigned long long ts = msg->ts_nsec;
- unsigned long rem_nsec = do_div(ts, 1000000000);
-
- len += sprintf(buf + len, "[%5lu.%06lu] ",
- (unsigned long) ts, rem_nsec / 1000);
- } else {
- len += 15;
- }
- }
-
+ len += print_time(msg->ts_nsec, buf ? buf + len : NULL);
return len;
}
-static size_t msg_print_text(const struct log *msg, bool syslog,
- char *buf, size_t size)
+static size_t msg_print_text(const struct log *msg, enum log_flags prev,
+ bool syslog, char *buf, size_t size)
{
const char *text = log_text(msg);
size_t text_size = msg->text_len;
+ bool prefix = true;
+ bool newline = true;
size_t len = 0;
+ if ((prev & LOG_CONT) && !(msg->flags & LOG_PREFIX))
+ prefix = false;
+
+ if (msg->flags & LOG_CONT) {
+ if ((prev & LOG_CONT) && !(prev & LOG_NEWLINE))
+ prefix = false;
+
+ if (!(msg->flags & LOG_NEWLINE))
+ newline = false;
+ }
+
do {
const char *next = memchr(text, '\n', text_size);
size_t text_len;
@@ -840,16 +879,22 @@
text_len + 1>= size - len)
break;
- len += print_prefix(msg, syslog, buf + len);
+ if (prefix)
+ len += print_prefix(msg, syslog, buf + len);
memcpy(buf + len, text, text_len);
len += text_len;
- buf[len++] = '\n';
+ if (next || newline)
+ buf[len++] = '\n';
} else {
/* SYSLOG_ACTION_* buffer size only calculation */
- len += print_prefix(msg, syslog, NULL);
- len += text_len + 1;
+ if (prefix)
+ len += print_prefix(msg, syslog, NULL);
+ len += text_len;
+ if (next || newline)
+ len++;
}
+ prefix = true;
text = next;
} while (text);
@@ -860,26 +905,60 @@
{
char *text;
struct log *msg;
- int len;
+ int len = 0;
text = kmalloc(LOG_LINE_MAX, GFP_KERNEL);
if (!text)
return -ENOMEM;
- raw_spin_lock_irq(&logbuf_lock);
- if (syslog_seq < log_first_seq) {
- /* messages are gone, move to first one */
- syslog_seq = log_first_seq;
- syslog_idx = log_first_idx;
- }
- msg = log_from_idx(syslog_idx);
- len = msg_print_text(msg, true, text, LOG_LINE_MAX);
- syslog_idx = log_next(syslog_idx);
- syslog_seq++;
- raw_spin_unlock_irq(&logbuf_lock);
+ while (size > 0) {
+ size_t n;
+ size_t skip;
- if (len > 0 && copy_to_user(buf, text, len))
- len = -EFAULT;
+ raw_spin_lock_irq(&logbuf_lock);
+ if (syslog_seq < log_first_seq) {
+ /* messages are gone, move to first one */
+ syslog_seq = log_first_seq;
+ syslog_idx = log_first_idx;
+ syslog_prev = 0;
+ syslog_partial = 0;
+ }
+ if (syslog_seq == log_next_seq) {
+ raw_spin_unlock_irq(&logbuf_lock);
+ break;
+ }
+
+ skip = syslog_partial;
+ msg = log_from_idx(syslog_idx);
+ n = msg_print_text(msg, syslog_prev, true, text, LOG_LINE_MAX);
+ if (n - syslog_partial <= size) {
+ /* message fits into buffer, move forward */
+ syslog_idx = log_next(syslog_idx);
+ syslog_seq++;
+ syslog_prev = msg->flags;
+ n -= syslog_partial;
+ syslog_partial = 0;
+ } else if (!len){
+ /* partial read(), remember position */
+ n = size;
+ syslog_partial += n;
+ } else
+ n = 0;
+ raw_spin_unlock_irq(&logbuf_lock);
+
+ if (!n)
+ break;
+
+ if (copy_to_user(buf, text + skip, n)) {
+ if (!len)
+ len = -EFAULT;
+ break;
+ }
+
+ len += n;
+ size -= n;
+ buf += n;
+ }
kfree(text);
return len;
@@ -899,6 +978,7 @@
u64 next_seq;
u64 seq;
u32 idx;
+ enum log_flags prev;
if (clear_seq < log_first_seq) {
/* messages are gone, move to first available one */
@@ -909,41 +989,47 @@
/*
* Find first record that fits, including all following records,
* into the user-provided buffer for this dump.
- */
+ */
seq = clear_seq;
idx = clear_idx;
+ prev = 0;
while (seq < log_next_seq) {
struct log *msg = log_from_idx(idx);
- len += msg_print_text(msg, true, NULL, 0);
+ len += msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
}
+
+ /* move first record forward until length fits into the buffer */
seq = clear_seq;
idx = clear_idx;
+ prev = 0;
while (len > size && seq < log_next_seq) {
struct log *msg = log_from_idx(idx);
- len -= msg_print_text(msg, true, NULL, 0);
+ len -= msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
}
- /* last message in this dump */
+ /* last message fitting into this dump */
next_seq = log_next_seq;
len = 0;
+ prev = 0;
while (len >= 0 && seq < next_seq) {
struct log *msg = log_from_idx(idx);
int textlen;
- textlen = msg_print_text(msg, true, text, LOG_LINE_MAX);
+ textlen = msg_print_text(msg, prev, true, text, LOG_LINE_MAX);
if (textlen < 0) {
len = textlen;
break;
}
idx = log_next(idx);
seq++;
+ prev = msg->flags;
raw_spin_unlock_irq(&logbuf_lock);
if (copy_to_user(buf + len, text, textlen))
@@ -956,6 +1042,7 @@
/* messages are gone, move to next one */
seq = log_first_seq;
idx = log_first_idx;
+ prev = 0;
}
}
}
@@ -1027,6 +1114,7 @@
/* Clear ring buffer */
case SYSLOG_ACTION_CLEAR:
syslog_print_all(NULL, 0, true);
+ break;
/* Disable logging to console */
case SYSLOG_ACTION_CONSOLE_OFF:
if (saved_console_loglevel == -1)
@@ -1059,6 +1147,8 @@
/* messages are gone, move to first one */
syslog_seq = log_first_seq;
syslog_idx = log_first_idx;
+ syslog_prev = 0;
+ syslog_partial = 0;
}
if (from_file) {
/*
@@ -1068,19 +1158,20 @@
*/
error = log_next_idx - syslog_idx;
} else {
- u64 seq;
- u32 idx;
+ u64 seq = syslog_seq;
+ u32 idx = syslog_idx;
+ enum log_flags prev = syslog_prev;
error = 0;
- seq = syslog_seq;
- idx = syslog_idx;
while (seq < log_next_seq) {
struct log *msg = log_from_idx(idx);
- error += msg_print_text(msg, true, NULL, 0);
+ error += msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
+ prev = msg->flags;
}
+ error -= syslog_partial;
}
raw_spin_unlock_irq(&logbuf_lock);
break;
@@ -1101,21 +1192,6 @@
return do_syslog(type, buf, len, SYSLOG_FROM_CALL);
}
-#ifdef CONFIG_KGDB_KDB
-/* kdb dmesg command needs access to the syslog buffer. do_syslog()
- * uses locks so it cannot be used during debugging. Just tell kdb
- * where the start and end of the physical and logical logs are. This
- * is equivalent to do_syslog(3).
- */
-void kdb_syslog_data(char *syslog_data[4])
-{
- syslog_data[0] = log_buf;
- syslog_data[1] = log_buf + log_buf_len;
- syslog_data[2] = log_buf + log_first_idx;
- syslog_data[3] = log_buf + log_next_idx;
-}
-#endif /* CONFIG_KGDB_KDB */
-
static bool __read_mostly ignore_loglevel;
static int __init ignore_loglevel_setup(char *str)
@@ -1259,22 +1335,98 @@
}
}
+/*
+ * Continuation lines are buffered, and not committed to the record buffer
+ * until the line is complete, or a race forces it. The line fragments
+ * though, are printed immediately to the consoles to ensure everything has
+ * reached the console in case of a kernel crash.
+ */
+static struct cont {
+ char buf[LOG_LINE_MAX];
+ size_t len; /* length == 0 means unused buffer */
+ size_t cons; /* bytes written to console */
+ struct task_struct *owner; /* task of first print*/
+ u64 ts_nsec; /* time of first print */
+ u8 level; /* log level of first message */
+ u8 facility; /* log level of first message */
+ bool flushed:1; /* buffer sealed and committed */
+} cont;
+
+static void cont_flush(void)
+{
+ if (cont.flushed)
+ return;
+ if (cont.len == 0)
+ return;
+
+ log_store(cont.facility, cont.level, LOG_NOCONS, cont.ts_nsec,
+ NULL, 0, cont.buf, cont.len);
+
+ cont.flushed = true;
+}
+
+static bool cont_add(int facility, int level, const char *text, size_t len)
+{
+ if (cont.len && cont.flushed)
+ return false;
+
+ if (cont.len + len > sizeof(cont.buf)) {
+ cont_flush();
+ return false;
+ }
+
+ if (!cont.len) {
+ cont.facility = facility;
+ cont.level = level;
+ cont.owner = current;
+ cont.ts_nsec = local_clock();
+ cont.cons = 0;
+ cont.flushed = false;
+ }
+
+ memcpy(cont.buf + cont.len, text, len);
+ cont.len += len;
+ return true;
+}
+
+static size_t cont_print_text(char *text, size_t size)
+{
+ size_t textlen = 0;
+ size_t len;
+
+ if (cont.cons == 0) {
+ textlen += print_time(cont.ts_nsec, text);
+ size -= textlen;
+ }
+
+ len = cont.len - cont.cons;
+ if (len > 0) {
+ if (len+1 > size)
+ len = size-1;
+ memcpy(text + textlen, cont.buf + cont.cons, len);
+ textlen += len;
+ cont.cons = cont.len;
+ }
+
+ if (cont.flushed) {
+ text[textlen++] = '\n';
+ /* got everything, release buffer */
+ cont.len = 0;
+ }
+ return textlen;
+}
+
asmlinkage int vprintk_emit(int facility, int level,
const char *dict, size_t dictlen,
const char *fmt, va_list args)
{
static int recursion_bug;
- static char cont_buf[LOG_LINE_MAX];
- static size_t cont_len;
- static int cont_level;
- static struct task_struct *cont_task;
static char textbuf[LOG_LINE_MAX];
char *text = textbuf;
size_t text_len;
+ enum log_flags lflags = 0;
unsigned long flags;
int this_cpu;
- bool newline = false;
- bool prefix = false;
int printed_len = 0;
boot_delay_msec();
@@ -1313,7 +1465,8 @@
recursion_bug = 0;
printed_len += strlen(recursion_msg);
/* emit KERN_CRIT message */
- log_store(0, 2, NULL, 0, recursion_msg, printed_len);
+ log_store(0, 2, LOG_PREFIX|LOG_NEWLINE, 0,
+ NULL, 0, recursion_msg, printed_len);
}
/*
@@ -1325,7 +1478,7 @@
/* mark and strip a trailing newline */
if (text_len && text[text_len-1] == '\n') {
text_len--;
- newline = true;
+ lflags |= LOG_NEWLINE;
}
/* strip syslog prefix and extract log level or control flags */
@@ -1335,7 +1488,7 @@
if (level == -1)
level = text[1] - '0';
case 'd': /* KERN_DEFAULT */
- prefix = true;
+ lflags |= LOG_PREFIX;
case 'c': /* KERN_CONT */
text += 3;
text_len -= 3;
@@ -1345,61 +1498,41 @@
if (level == -1)
level = default_message_loglevel;
- if (dict) {
- prefix = true;
- newline = true;
- }
+ if (dict)
+ lflags |= LOG_PREFIX|LOG_NEWLINE;
- if (!newline) {
- if (cont_len && (prefix || cont_task != current)) {
- /*
- * Flush earlier buffer, which is either from a
- * different thread, or when we got a new prefix.
- */
- log_store(facility, cont_level, NULL, 0, cont_buf, cont_len);
- cont_len = 0;
- }
+ if (!(lflags & LOG_NEWLINE)) {
+ /*
+ * Flush the conflicting buffer. An earlier newline was missing,
+ * or another task also prints continuation lines.
+ */
+ if (cont.len && (lflags & LOG_PREFIX || cont.owner != current))
+ cont_flush();
- if (!cont_len) {
- cont_level = level;
- cont_task = current;
- }
-
- /* buffer or append to earlier buffer from the same thread */
- if (cont_len + text_len > sizeof(cont_buf))
- text_len = sizeof(cont_buf) - cont_len;
- memcpy(cont_buf + cont_len, text, text_len);
- cont_len += text_len;
- } else {
- if (cont_len && cont_task == current) {
- if (prefix) {
- /*
- * New prefix from the same thread; flush. We
- * either got no earlier newline, or we race
- * with an interrupt.
- */
- log_store(facility, cont_level,
- NULL, 0, cont_buf, cont_len);
- cont_len = 0;
- }
-
- /* append to the earlier buffer and flush */
- if (cont_len + text_len > sizeof(cont_buf))
- text_len = sizeof(cont_buf) - cont_len;
- memcpy(cont_buf + cont_len, text, text_len);
- cont_len += text_len;
- log_store(facility, cont_level,
- NULL, 0, cont_buf, cont_len);
- cont_len = 0;
- cont_task = NULL;
- printed_len = cont_len;
- } else {
- /* ordinary single and terminated line */
- log_store(facility, level,
+ /* buffer line if possible, otherwise store it right away */
+ if (!cont_add(facility, level, text, text_len))
+ log_store(facility, level, lflags | LOG_CONT, 0,
dict, dictlen, text, text_len);
- printed_len = text_len;
+ } else {
+ bool stored = false;
+
+ /*
+ * If an earlier newline was missing and it was the same task,
+ * either merge it with the current buffer and flush, or if
+ * there was a race with interrupts (prefix == true) then just
+ * flush it out and store this line separately.
+ */
+ if (cont.len && cont.owner == current) {
+ if (!(lflags & LOG_PREFIX))
+ stored = cont_add(facility, level, text, text_len);
+ cont_flush();
}
+
+ if (!stored)
+ log_store(facility, level, lflags, 0,
+ dict, dictlen, text, text_len);
}
+ printed_len += text_len;
/*
* Try to acquire and then immediately release the console semaphore.
@@ -1486,11 +1619,18 @@
#else
#define LOG_LINE_MAX 0
+static struct cont {
+ size_t len;
+ size_t cons;
+ u8 level;
+ bool flushed:1;
+} cont;
static struct log *log_from_idx(u32 idx) { return NULL; }
static u32 log_next(u32 idx) { return 0; }
static void call_console_drivers(int level, const char *text, size_t len) {}
-static size_t msg_print_text(const struct log *msg, bool syslog,
- char *buf, size_t size) { return 0; }
+static size_t msg_print_text(const struct log *msg, enum log_flags prev,
+ bool syslog, char *buf, size_t size) { return 0; }
+static size_t cont_print_text(char *text, size_t size) { return 0; }
#endif /* CONFIG_PRINTK */
@@ -1765,6 +1905,7 @@
/* the next printk record to write to the console */
static u64 console_seq;
static u32 console_idx;
+static enum log_flags console_prev;
/**
* console_unlock - unlock the console system
@@ -1782,6 +1923,7 @@
*/
void console_unlock(void)
{
+ static char text[LOG_LINE_MAX];
static u64 seen_seq;
unsigned long flags;
bool wake_klogd = false;
@@ -1794,10 +1936,23 @@
console_may_schedule = 0;
+ /* flush buffered message fragment immediately to console */
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ if (cont.len && (cont.cons < cont.len || cont.flushed)) {
+ size_t len;
+
+ len = cont_print_text(text, sizeof(text));
+ raw_spin_unlock(&logbuf_lock);
+ stop_critical_timings();
+ call_console_drivers(cont.level, text, len);
+ start_critical_timings();
+ local_irq_restore(flags);
+ } else
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
again:
for (;;) {
struct log *msg;
- static char text[LOG_LINE_MAX];
size_t len;
int level;
@@ -1811,18 +1966,35 @@
/* messages are gone, move to first one */
console_seq = log_first_seq;
console_idx = log_first_idx;
+ console_prev = 0;
}
-
+skip:
if (console_seq == log_next_seq)
break;
msg = log_from_idx(console_idx);
- level = msg->level & 7;
+ if (msg->flags & LOG_NOCONS) {
+ /*
+ * Skip record we have buffered and already printed
+ * directly to the console when we received it.
+ */
+ console_idx = log_next(console_idx);
+ console_seq++;
+ /*
+ * We will get here again when we register a new
+ * CON_PRINTBUFFER console. Clear the flag so we
+ * will properly dump everything later.
+ */
+ msg->flags &= ~LOG_NOCONS;
+ goto skip;
+ }
- len = msg_print_text(msg, false, text, sizeof(text));
-
+ level = msg->level;
+ len = msg_print_text(msg, console_prev, false,
+ text, sizeof(text));
console_idx = log_next(console_idx);
console_seq++;
+ console_prev = msg->flags;
raw_spin_unlock(&logbuf_lock);
stop_critical_timings(); /* don't trace print latency */
@@ -2085,6 +2257,7 @@
raw_spin_lock_irqsave(&logbuf_lock, flags);
console_seq = syslog_seq;
console_idx = syslog_idx;
+ console_prev = syslog_prev;
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
/*
* We're about to replay the log buffer. Only do this to the
@@ -2300,48 +2473,256 @@
* kmsg_dump - dump kernel log to kernel message dumpers.
* @reason: the reason (oops, panic etc) for dumping
*
- * Iterate through each of the dump devices and call the oops/panic
- * callbacks with the log buffer.
+ * Call each of the registered dumper's dump() callback, which can
+ * retrieve the kmsg records with kmsg_dump_get_line() or
+ * kmsg_dump_get_buffer().
*/
void kmsg_dump(enum kmsg_dump_reason reason)
{
- u64 idx;
struct kmsg_dumper *dumper;
- const char *s1, *s2;
- unsigned long l1, l2;
unsigned long flags;
if ((reason > KMSG_DUMP_OOPS) && !always_kmsg_dump)
return;
- /* Theoretically, the log could move on after we do this, but
- there's not a lot we can do about that. The new messages
- will overwrite the start of what we dump. */
-
- raw_spin_lock_irqsave(&logbuf_lock, flags);
- if (syslog_seq < log_first_seq)
- idx = syslog_idx;
- else
- idx = log_first_idx;
-
- if (idx > log_next_idx) {
- s1 = log_buf;
- l1 = log_next_idx;
-
- s2 = log_buf + idx;
- l2 = log_buf_len - idx;
- } else {
- s1 = "";
- l1 = 0;
-
- s2 = log_buf + idx;
- l2 = log_next_idx - idx;
- }
- raw_spin_unlock_irqrestore(&logbuf_lock, flags);
-
rcu_read_lock();
- list_for_each_entry_rcu(dumper, &dump_list, list)
- dumper->dump(dumper, reason, s1, l1, s2, l2);
+ list_for_each_entry_rcu(dumper, &dump_list, list) {
+ if (dumper->max_reason && reason > dumper->max_reason)
+ continue;
+
+ /* initialize iterator with data about the stored records */
+ dumper->active = true;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ dumper->cur_seq = clear_seq;
+ dumper->cur_idx = clear_idx;
+ dumper->next_seq = log_next_seq;
+ dumper->next_idx = log_next_idx;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
+ /* invoke dumper which will iterate over records */
+ dumper->dump(dumper, reason);
+
+ /* reset iterator */
+ dumper->active = false;
+ }
rcu_read_unlock();
}
+
+/**
+ * kmsg_dump_get_line_nolock - retrieve one kmsg log line (unlocked version)
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @line: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the beginning of the kmsg buffer, with the oldest kmsg
+ * record, and copy one record into the provided buffer.
+ *
+ * Consecutive calls will return the next available record moving
+ * towards the end of the buffer with the youngest messages.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ *
+ * The function is similar to kmsg_dump_get_line(), but grabs no locks.
+ */
+bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len)
+{
+ struct log *msg;
+ size_t l = 0;
+ bool ret = false;
+
+ if (!dumper->active)
+ goto out;
+
+ if (dumper->cur_seq < log_first_seq) {
+ /* messages are gone, move to first available one */
+ dumper->cur_seq = log_first_seq;
+ dumper->cur_idx = log_first_idx;
+ }
+
+ /* last entry */
+ if (dumper->cur_seq >= log_next_seq)
+ goto out;
+
+ msg = log_from_idx(dumper->cur_idx);
+ l = msg_print_text(msg, 0, syslog, line, size);
+
+ dumper->cur_idx = log_next(dumper->cur_idx);
+ dumper->cur_seq++;
+ ret = true;
+out:
+ if (len)
+ *len = l;
+ return ret;
+}
+
+/**
+ * kmsg_dump_get_line - retrieve one kmsg log line
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @line: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the beginning of the kmsg buffer, with the oldest kmsg
+ * record, and copy one record into the provided buffer.
+ *
+ * Consecutive calls will return the next available record moving
+ * towards the end of the buffer with the youngest messages.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ */
+bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len)
+{
+ unsigned long flags;
+ bool ret;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ ret = kmsg_dump_get_line_nolock(dumper, syslog, line, size, len);
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
+
+/**
+ * kmsg_dump_get_buffer - copy kmsg log lines
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @buf: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the end of the kmsg buffer and fill the provided buffer
+ * with as many of the the *youngest* kmsg records that fit into it.
+ * If the buffer is large enough, all available kmsg records will be
+ * copied with a single call.
+ *
+ * Consecutive calls will fill the buffer with the next block of
+ * available older records, not including the earlier retrieved ones.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ */
+bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+ char *buf, size_t size, size_t *len)
+{
+ unsigned long flags;
+ u64 seq;
+ u32 idx;
+ u64 next_seq;
+ u32 next_idx;
+ enum log_flags prev;
+ size_t l = 0;
+ bool ret = false;
+
+ if (!dumper->active)
+ goto out;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ if (dumper->cur_seq < log_first_seq) {
+ /* messages are gone, move to first available one */
+ dumper->cur_seq = log_first_seq;
+ dumper->cur_idx = log_first_idx;
+ }
+
+ /* last entry */
+ if (dumper->cur_seq >= dumper->next_seq) {
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+ goto out;
+ }
+
+ /* calculate length of entire buffer */
+ seq = dumper->cur_seq;
+ idx = dumper->cur_idx;
+ prev = 0;
+ while (seq < dumper->next_seq) {
+ struct log *msg = log_from_idx(idx);
+
+ l += msg_print_text(msg, prev, true, NULL, 0);
+ idx = log_next(idx);
+ seq++;
+ prev = msg->flags;
+ }
+
+ /* move first record forward until length fits into the buffer */
+ seq = dumper->cur_seq;
+ idx = dumper->cur_idx;
+ prev = 0;
+ while (l > size && seq < dumper->next_seq) {
+ struct log *msg = log_from_idx(idx);
+
+ l -= msg_print_text(msg, prev, true, NULL, 0);
+ idx = log_next(idx);
+ seq++;
+ prev = msg->flags;
+ }
+
+ /* last message in next interation */
+ next_seq = seq;
+ next_idx = idx;
+
+ l = 0;
+ prev = 0;
+ while (seq < dumper->next_seq) {
+ struct log *msg = log_from_idx(idx);
+
+ l += msg_print_text(msg, prev, syslog, buf + l, size - l);
+ idx = log_next(idx);
+ seq++;
+ prev = msg->flags;
+ }
+
+ dumper->next_seq = next_seq;
+ dumper->next_idx = next_idx;
+ ret = true;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+out:
+ if (len)
+ *len = l;
+ return ret;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_get_buffer);
+
+/**
+ * kmsg_dump_rewind_nolock - reset the interator (unlocked version)
+ * @dumper: registered kmsg dumper
+ *
+ * Reset the dumper's iterator so that kmsg_dump_get_line() and
+ * kmsg_dump_get_buffer() can be called again and used multiple
+ * times within the same dumper.dump() callback.
+ *
+ * The function is similar to kmsg_dump_rewind(), but grabs no locks.
+ */
+void kmsg_dump_rewind_nolock(struct kmsg_dumper *dumper)
+{
+ dumper->cur_seq = clear_seq;
+ dumper->cur_idx = clear_idx;
+ dumper->next_seq = log_next_seq;
+ dumper->next_idx = log_next_idx;
+}
+
+/**
+ * kmsg_dump_rewind - reset the interator
+ * @dumper: registered kmsg dumper
+ *
+ * Reset the dumper's iterator so that kmsg_dump_get_line() and
+ * kmsg_dump_get_buffer() can be called again and used multiple
+ * times within the same dumper.dump() callback.
+ */
+void kmsg_dump_rewind(struct kmsg_dumper *dumper)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ kmsg_dump_rewind_nolock(dumper);
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_rewind);
#endif
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index 95cba41..4e6a61b 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -54,6 +54,50 @@
#ifdef CONFIG_PREEMPT_RCU
/*
+ * Preemptible RCU implementation for rcu_read_lock().
+ * Just increment ->rcu_read_lock_nesting, shared state will be updated
+ * if we block.
+ */
+void __rcu_read_lock(void)
+{
+ current->rcu_read_lock_nesting++;
+ barrier(); /* critical section after entry code. */
+}
+EXPORT_SYMBOL_GPL(__rcu_read_lock);
+
+/*
+ * Preemptible RCU implementation for rcu_read_unlock().
+ * Decrement ->rcu_read_lock_nesting. If the result is zero (outermost
+ * rcu_read_unlock()) and ->rcu_read_unlock_special is non-zero, then
+ * invoke rcu_read_unlock_special() to clean up after a context switch
+ * in an RCU read-side critical section and other special cases.
+ */
+void __rcu_read_unlock(void)
+{
+ struct task_struct *t = current;
+
+ if (t->rcu_read_lock_nesting != 1) {
+ --t->rcu_read_lock_nesting;
+ } else {
+ barrier(); /* critical section before exit code. */
+ t->rcu_read_lock_nesting = INT_MIN;
+ barrier(); /* assign before ->rcu_read_unlock_special load */
+ if (unlikely(ACCESS_ONCE(t->rcu_read_unlock_special)))
+ rcu_read_unlock_special(t);
+ barrier(); /* ->rcu_read_unlock_special load before assign */
+ t->rcu_read_lock_nesting = 0;
+ }
+#ifdef CONFIG_PROVE_LOCKING
+ {
+ int rrln = ACCESS_ONCE(t->rcu_read_lock_nesting);
+
+ WARN_ON_ONCE(rrln < 0 && rrln > INT_MIN / 2);
+ }
+#endif /* #ifdef CONFIG_PROVE_LOCKING */
+}
+EXPORT_SYMBOL_GPL(__rcu_read_unlock);
+
+/*
* Check for a task exiting while in a preemptible-RCU read-side
* critical section, clean up if so. No need to issue warnings,
* as debug_check_no_locks_held() already does this if lockdep
diff --git a/kernel/rcutiny.c b/kernel/rcutiny.c
index 37a5444..547b1fe 100644
--- a/kernel/rcutiny.c
+++ b/kernel/rcutiny.c
@@ -172,7 +172,7 @@
local_irq_restore(flags);
}
-#ifdef CONFIG_PROVE_RCU
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
/*
* Test whether RCU thinks that the current CPU is idle.
@@ -183,7 +183,7 @@
}
EXPORT_SYMBOL(rcu_is_cpu_idle);
-#endif /* #ifdef CONFIG_PROVE_RCU */
+#endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
/*
* Test whether the current CPU was interrupted from idle. Nested
diff --git a/kernel/rcutiny_plugin.h b/kernel/rcutiny_plugin.h
index fc31a2d..918fd1e 100644
--- a/kernel/rcutiny_plugin.h
+++ b/kernel/rcutiny_plugin.h
@@ -132,7 +132,6 @@
RCU_TRACE(.rcb.name = "rcu_preempt")
};
-static void rcu_read_unlock_special(struct task_struct *t);
static int rcu_preempted_readers_exp(void);
static void rcu_report_exp_done(void);
@@ -351,8 +350,9 @@
rcu_preempt_ctrlblk.boost_tasks =
rcu_preempt_ctrlblk.gp_tasks;
invoke_rcu_callbacks();
- } else
+ } else {
RCU_TRACE(rcu_initiate_boost_trace());
+ }
return 1;
}
@@ -527,23 +527,11 @@
}
/*
- * Tiny-preemptible RCU implementation for rcu_read_lock().
- * Just increment ->rcu_read_lock_nesting, shared state will be updated
- * if we block.
- */
-void __rcu_read_lock(void)
-{
- current->rcu_read_lock_nesting++;
- barrier(); /* needed if we ever invoke rcu_read_lock in rcutiny.c */
-}
-EXPORT_SYMBOL_GPL(__rcu_read_lock);
-
-/*
* Handle special cases during rcu_read_unlock(), such as needing to
* notify RCU core processing or task having blocked during the RCU
* read-side critical section.
*/
-static noinline void rcu_read_unlock_special(struct task_struct *t)
+void rcu_read_unlock_special(struct task_struct *t)
{
int empty;
int empty_exp;
@@ -627,38 +615,6 @@
}
/*
- * Tiny-preemptible RCU implementation for rcu_read_unlock().
- * Decrement ->rcu_read_lock_nesting. If the result is zero (outermost
- * rcu_read_unlock()) and ->rcu_read_unlock_special is non-zero, then
- * invoke rcu_read_unlock_special() to clean up after a context switch
- * in an RCU read-side critical section and other special cases.
- */
-void __rcu_read_unlock(void)
-{
- struct task_struct *t = current;
-
- barrier(); /* needed if we ever invoke rcu_read_unlock in rcutiny.c */
- if (t->rcu_read_lock_nesting != 1)
- --t->rcu_read_lock_nesting;
- else {
- t->rcu_read_lock_nesting = INT_MIN;
- barrier(); /* assign before ->rcu_read_unlock_special load */
- if (unlikely(ACCESS_ONCE(t->rcu_read_unlock_special)))
- rcu_read_unlock_special(t);
- barrier(); /* ->rcu_read_unlock_special load before assign */
- t->rcu_read_lock_nesting = 0;
- }
-#ifdef CONFIG_PROVE_LOCKING
- {
- int rrln = ACCESS_ONCE(t->rcu_read_lock_nesting);
-
- WARN_ON_ONCE(rrln < 0 && rrln > INT_MIN / 2);
- }
-#endif /* #ifdef CONFIG_PROVE_LOCKING */
-}
-EXPORT_SYMBOL_GPL(__rcu_read_unlock);
-
-/*
* Check for a quiescent state from the current CPU. When a task blocks,
* the task is recorded in the rcu_preempt_ctrlblk structure, which is
* checked elsewhere. This is called from the scheduling-clock interrupt.
@@ -823,9 +779,9 @@
rpcp->exp_tasks = NULL;
/* Wait for tail of ->blkd_tasks list to drain. */
- if (!rcu_preempted_readers_exp())
+ if (!rcu_preempted_readers_exp()) {
local_irq_restore(flags);
- else {
+ } else {
rcu_initiate_boost();
local_irq_restore(flags);
wait_event(sync_rcu_preempt_exp_wq,
@@ -846,8 +802,6 @@
*/
int rcu_preempt_needs_cpu(void)
{
- if (!rcu_preempt_running_reader())
- rcu_preempt_cpu_qs();
return rcu_preempt_ctrlblk.rcb.rcucblist != NULL;
}
diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c
index e66b34a..25b1503 100644
--- a/kernel/rcutorture.c
+++ b/kernel/rcutorture.c
@@ -49,8 +49,7 @@
#include <asm/byteorder.h>
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Paul E. McKenney <paulmck@us.ibm.com> and "
- "Josh Triplett <josh@freedesktop.org>");
+MODULE_AUTHOR("Paul E. McKenney <paulmck@us.ibm.com> and Josh Triplett <josh@freedesktop.org>");
static int nreaders = -1; /* # reader threads, defaults to 2*ncpus */
static int nfakewriters = 4; /* # fake writer threads */
@@ -206,6 +205,7 @@
DEFINE_MUTEX(boost_mutex); /* protect setting boost_starttime */
/* and boost task create/destroy. */
static atomic_t barrier_cbs_count; /* Barrier callbacks registered. */
+static bool barrier_phase; /* Test phase. */
static atomic_t barrier_cbs_invoked; /* Barrier callbacks invoked. */
static wait_queue_head_t *barrier_cbs_wq; /* Coordinate barrier testing. */
static DECLARE_WAIT_QUEUE_HEAD(barrier_wq);
@@ -407,8 +407,9 @@
if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN) {
rp->rtort_mbtest = 0;
rcu_torture_free(rp);
- } else
+ } else {
cur_ops->deferred_free(rp);
+ }
}
static int rcu_no_completed(void)
@@ -635,6 +636,17 @@
synchronize_srcu(&srcu_ctl);
}
+static void srcu_torture_call(struct rcu_head *head,
+ void (*func)(struct rcu_head *head))
+{
+ call_srcu(&srcu_ctl, head, func);
+}
+
+static void srcu_torture_barrier(void)
+{
+ srcu_barrier(&srcu_ctl);
+}
+
static int srcu_torture_stats(char *page)
{
int cnt = 0;
@@ -661,8 +673,8 @@
.completed = srcu_torture_completed,
.deferred_free = srcu_torture_deferred_free,
.sync = srcu_torture_synchronize,
- .call = NULL,
- .cb_barrier = NULL,
+ .call = srcu_torture_call,
+ .cb_barrier = srcu_torture_barrier,
.stats = srcu_torture_stats,
.name = "srcu"
};
@@ -1013,7 +1025,11 @@
do {
schedule_timeout_uninterruptible(1 + rcu_random(&rand)%10);
udelay(rcu_random(&rand) & 0x3ff);
- cur_ops->sync();
+ if (cur_ops->cb_barrier != NULL &&
+ rcu_random(&rand) % (nfakewriters * 8) == 0)
+ cur_ops->cb_barrier();
+ else
+ cur_ops->sync();
rcu_stutter_wait("rcu_torture_fakewriter");
} while (!kthread_should_stop() && fullstop == FULLSTOP_DONTSTOP);
@@ -1183,27 +1199,27 @@
}
cnt += sprintf(&page[cnt], "%s%s ", torture_type, TORTURE_FLAG);
cnt += sprintf(&page[cnt],
- "rtc: %p ver: %lu tfle: %d rta: %d rtaf: %d rtf: %d "
- "rtmbe: %d rtbke: %ld rtbre: %ld "
- "rtbf: %ld rtb: %ld nt: %ld "
- "onoff: %ld/%ld:%ld/%ld "
- "barrier: %ld/%ld:%ld",
+ "rtc: %p ver: %lu tfle: %d rta: %d rtaf: %d rtf: %d ",
rcu_torture_current,
rcu_torture_current_version,
list_empty(&rcu_torture_freelist),
atomic_read(&n_rcu_torture_alloc),
atomic_read(&n_rcu_torture_alloc_fail),
- atomic_read(&n_rcu_torture_free),
+ atomic_read(&n_rcu_torture_free));
+ cnt += sprintf(&page[cnt], "rtmbe: %d rtbke: %ld rtbre: %ld ",
atomic_read(&n_rcu_torture_mberror),
n_rcu_torture_boost_ktrerror,
- n_rcu_torture_boost_rterror,
+ n_rcu_torture_boost_rterror);
+ cnt += sprintf(&page[cnt], "rtbf: %ld rtb: %ld nt: %ld ",
n_rcu_torture_boost_failure,
n_rcu_torture_boosts,
- n_rcu_torture_timers,
+ n_rcu_torture_timers);
+ cnt += sprintf(&page[cnt], "onoff: %ld/%ld:%ld/%ld ",
n_online_successes,
n_online_attempts,
n_offline_successes,
- n_offline_attempts,
+ n_offline_attempts);
+ cnt += sprintf(&page[cnt], "barrier: %ld/%ld:%ld",
n_barrier_successes,
n_barrier_attempts,
n_rcu_torture_barrier_error);
@@ -1445,8 +1461,7 @@
delta = shutdown_time - jiffies_snap;
if (verbose)
printk(KERN_ALERT "%s" TORTURE_FLAG
- "rcu_torture_shutdown task: %lu "
- "jiffies remaining\n",
+ "rcu_torture_shutdown task: %lu jiffies remaining\n",
torture_type, delta);
schedule_timeout_interruptible(delta);
jiffies_snap = ACCESS_ONCE(jiffies);
@@ -1498,8 +1513,7 @@
if (cpu_down(cpu) == 0) {
if (verbose)
printk(KERN_ALERT "%s" TORTURE_FLAG
- "rcu_torture_onoff task: "
- "offlined %d\n",
+ "rcu_torture_onoff task: offlined %d\n",
torture_type, cpu);
n_offline_successes++;
}
@@ -1512,8 +1526,7 @@
if (cpu_up(cpu) == 0) {
if (verbose)
printk(KERN_ALERT "%s" TORTURE_FLAG
- "rcu_torture_onoff task: "
- "onlined %d\n",
+ "rcu_torture_onoff task: onlined %d\n",
torture_type, cpu);
n_online_successes++;
}
@@ -1631,6 +1644,7 @@
static int rcu_torture_barrier_cbs(void *arg)
{
long myid = (long)arg;
+ bool lastphase = 0;
struct rcu_head rcu;
init_rcu_head_on_stack(&rcu);
@@ -1638,9 +1652,11 @@
set_user_nice(current, 19);
do {
wait_event(barrier_cbs_wq[myid],
- atomic_read(&barrier_cbs_count) == n_barrier_cbs ||
+ barrier_phase != lastphase ||
kthread_should_stop() ||
fullstop != FULLSTOP_DONTSTOP);
+ lastphase = barrier_phase;
+ smp_mb(); /* ensure barrier_phase load before ->call(). */
if (kthread_should_stop() || fullstop != FULLSTOP_DONTSTOP)
break;
cur_ops->call(&rcu, rcu_torture_barrier_cbf);
@@ -1665,7 +1681,8 @@
do {
atomic_set(&barrier_cbs_invoked, 0);
atomic_set(&barrier_cbs_count, n_barrier_cbs);
- /* wake_up() path contains the required barriers. */
+ smp_mb(); /* Ensure barrier_phase after prior assignments. */
+ barrier_phase = !barrier_phase;
for (i = 0; i < n_barrier_cbs; i++)
wake_up(&barrier_cbs_wq[i]);
wait_event(barrier_wq,
@@ -1684,7 +1701,7 @@
schedule_timeout_interruptible(HZ / 10);
} while (!kthread_should_stop() && fullstop == FULLSTOP_DONTSTOP);
VERBOSE_PRINTK_STRING("rcu_torture_barrier task stopping");
- rcutorture_shutdown_absorb("rcu_torture_barrier_cbs");
+ rcutorture_shutdown_absorb("rcu_torture_barrier");
while (!kthread_should_stop())
schedule_timeout_interruptible(1);
return 0;
@@ -1908,8 +1925,8 @@
static struct rcu_torture_ops *torture_ops[] =
{ &rcu_ops, &rcu_sync_ops, &rcu_expedited_ops,
&rcu_bh_ops, &rcu_bh_sync_ops, &rcu_bh_expedited_ops,
- &srcu_ops, &srcu_sync_ops, &srcu_raw_ops,
- &srcu_raw_sync_ops, &srcu_expedited_ops,
+ &srcu_ops, &srcu_sync_ops, &srcu_expedited_ops,
+ &srcu_raw_ops, &srcu_raw_sync_ops,
&sched_ops, &sched_sync_ops, &sched_expedited_ops, };
mutex_lock(&fullstop_mutex);
@@ -1931,8 +1948,7 @@
return -EINVAL;
}
if (cur_ops->fqs == NULL && fqs_duration != 0) {
- printk(KERN_ALERT "rcu-torture: ->fqs NULL and non-zero "
- "fqs_duration, fqs disabled.\n");
+ printk(KERN_ALERT "rcu-torture: ->fqs NULL and non-zero fqs_duration, fqs disabled.\n");
fqs_duration = 0;
}
if (cur_ops->init)
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 0da7b88..f280e54 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -60,36 +60,44 @@
/* Data structures. */
-static struct lock_class_key rcu_node_class[NUM_RCU_LVLS];
+static struct lock_class_key rcu_node_class[RCU_NUM_LVLS];
-#define RCU_STATE_INITIALIZER(structname) { \
- .level = { &structname##_state.node[0] }, \
- .levelcnt = { \
- NUM_RCU_LVL_0, /* root of hierarchy. */ \
- NUM_RCU_LVL_1, \
- NUM_RCU_LVL_2, \
- NUM_RCU_LVL_3, \
- NUM_RCU_LVL_4, /* == MAX_RCU_LVLS */ \
- }, \
+#define RCU_STATE_INITIALIZER(sname, cr) { \
+ .level = { &sname##_state.node[0] }, \
+ .call = cr, \
.fqs_state = RCU_GP_IDLE, \
.gpnum = -300, \
.completed = -300, \
- .onofflock = __RAW_SPIN_LOCK_UNLOCKED(&structname##_state.onofflock), \
- .orphan_nxttail = &structname##_state.orphan_nxtlist, \
- .orphan_donetail = &structname##_state.orphan_donelist, \
- .fqslock = __RAW_SPIN_LOCK_UNLOCKED(&structname##_state.fqslock), \
- .n_force_qs = 0, \
- .n_force_qs_ngp = 0, \
- .name = #structname, \
+ .onofflock = __RAW_SPIN_LOCK_UNLOCKED(&sname##_state.onofflock), \
+ .orphan_nxttail = &sname##_state.orphan_nxtlist, \
+ .orphan_donetail = &sname##_state.orphan_donelist, \
+ .barrier_mutex = __MUTEX_INITIALIZER(sname##_state.barrier_mutex), \
+ .fqslock = __RAW_SPIN_LOCK_UNLOCKED(&sname##_state.fqslock), \
+ .name = #sname, \
}
-struct rcu_state rcu_sched_state = RCU_STATE_INITIALIZER(rcu_sched);
+struct rcu_state rcu_sched_state =
+ RCU_STATE_INITIALIZER(rcu_sched, call_rcu_sched);
DEFINE_PER_CPU(struct rcu_data, rcu_sched_data);
-struct rcu_state rcu_bh_state = RCU_STATE_INITIALIZER(rcu_bh);
+struct rcu_state rcu_bh_state = RCU_STATE_INITIALIZER(rcu_bh, call_rcu_bh);
DEFINE_PER_CPU(struct rcu_data, rcu_bh_data);
static struct rcu_state *rcu_state;
+LIST_HEAD(rcu_struct_flavors);
+
+/* Increase (but not decrease) the CONFIG_RCU_FANOUT_LEAF at boot time. */
+static int rcu_fanout_leaf = CONFIG_RCU_FANOUT_LEAF;
+module_param(rcu_fanout_leaf, int, 0);
+int rcu_num_lvls __read_mostly = RCU_NUM_LVLS;
+static int num_rcu_lvl[] = { /* Number of rcu_nodes at specified level. */
+ NUM_RCU_LVL_0,
+ NUM_RCU_LVL_1,
+ NUM_RCU_LVL_2,
+ NUM_RCU_LVL_3,
+ NUM_RCU_LVL_4,
+};
+int rcu_num_nodes __read_mostly = NUM_RCU_NODES; /* Total # rcu_nodes in use. */
/*
* The rcu_scheduler_active variable transitions from zero to one just
@@ -147,13 +155,6 @@
unsigned long rcutorture_testseq;
unsigned long rcutorture_vernum;
-/* State information for rcu_barrier() and friends. */
-
-static DEFINE_PER_CPU(struct rcu_head, rcu_barrier_head) = {NULL};
-static atomic_t rcu_barrier_cpu_count;
-static DEFINE_MUTEX(rcu_barrier_mutex);
-static struct completion rcu_barrier_completion;
-
/*
* Return true if an RCU grace period is in progress. The ACCESS_ONCE()s
* permit this function to be invoked without holding the root rcu_node
@@ -201,6 +202,7 @@
{
trace_rcu_utilization("Start context switch");
rcu_sched_qs(cpu);
+ rcu_preempt_note_context_switch(cpu);
trace_rcu_utilization("End context switch");
}
EXPORT_SYMBOL_GPL(rcu_note_context_switch);
@@ -357,7 +359,7 @@
struct task_struct *idle = idle_task(smp_processor_id());
trace_rcu_dyntick("Error on entry: not idle task", oldval, 0);
- ftrace_dump(DUMP_ALL);
+ ftrace_dump(DUMP_ORIG);
WARN_ONCE(1, "Current pid: %d comm: %s / Idle pid: %d comm: %s",
current->pid, current->comm,
idle->pid, idle->comm); /* must be idle task! */
@@ -467,7 +469,7 @@
trace_rcu_dyntick("Error on exit: not idle task",
oldval, rdtp->dynticks_nesting);
- ftrace_dump(DUMP_ALL);
+ ftrace_dump(DUMP_ORIG);
WARN_ONCE(1, "Current pid: %d comm: %s / Idle pid: %d comm: %s",
current->pid, current->comm,
idle->pid, idle->comm); /* must be idle task! */
@@ -584,8 +586,6 @@
WARN_ON_ONCE(atomic_read(&rdtp->dynticks) & 0x1);
}
-#ifdef CONFIG_PROVE_RCU
-
/**
* rcu_is_cpu_idle - see if RCU thinks that the current CPU is idle
*
@@ -603,7 +603,7 @@
}
EXPORT_SYMBOL(rcu_is_cpu_idle);
-#ifdef CONFIG_HOTPLUG_CPU
+#if defined(CONFIG_PROVE_RCU) && defined(CONFIG_HOTPLUG_CPU)
/*
* Is the current CPU online? Disable preemption to avoid false positives
@@ -644,9 +644,7 @@
}
EXPORT_SYMBOL_GPL(rcu_lockdep_current_cpu_online);
-#endif /* #ifdef CONFIG_HOTPLUG_CPU */
-
-#endif /* #ifdef CONFIG_PROVE_RCU */
+#endif /* #if defined(CONFIG_PROVE_RCU) && defined(CONFIG_HOTPLUG_CPU) */
/**
* rcu_is_cpu_rrupt_from_idle - see if idle or immediately interrupted from idle
@@ -732,7 +730,7 @@
int cpu;
long delta;
unsigned long flags;
- int ndetected;
+ int ndetected = 0;
struct rcu_node *rnp = rcu_get_root(rsp);
/* Only let one CPU complain about others per time interval. */
@@ -773,7 +771,7 @@
*/
rnp = rcu_get_root(rsp);
raw_spin_lock_irqsave(&rnp->lock, flags);
- ndetected = rcu_print_task_stall(rnp);
+ ndetected += rcu_print_task_stall(rnp);
raw_spin_unlock_irqrestore(&rnp->lock, flags);
print_cpu_stall_info_end();
@@ -859,9 +857,10 @@
*/
void rcu_cpu_stall_reset(void)
{
- rcu_sched_state.jiffies_stall = jiffies + ULONG_MAX / 2;
- rcu_bh_state.jiffies_stall = jiffies + ULONG_MAX / 2;
- rcu_preempt_stall_reset();
+ struct rcu_state *rsp;
+
+ for_each_rcu_flavor(rsp)
+ rsp->jiffies_stall = jiffies + ULONG_MAX / 2;
}
static struct notifier_block rcu_panic_block = {
@@ -893,8 +892,9 @@
if (rnp->qsmask & rdp->grpmask) {
rdp->qs_pending = 1;
rdp->passed_quiesce = 0;
- } else
+ } else {
rdp->qs_pending = 0;
+ }
zero_cpu_stall_ticks(rdp);
}
}
@@ -936,6 +936,18 @@
}
/*
+ * Initialize the specified rcu_data structure's callback list to empty.
+ */
+static void init_callback_list(struct rcu_data *rdp)
+{
+ int i;
+
+ rdp->nxtlist = NULL;
+ for (i = 0; i < RCU_NEXT_SIZE; i++)
+ rdp->nxttail[i] = &rdp->nxtlist;
+}
+
+/*
* Advance this CPU's callbacks, but only if the current grace period
* has ended. This may be called only from the CPU to whom the rdp
* belongs. In addition, the corresponding leaf rcu_node structure's
@@ -1327,8 +1339,6 @@
rcu_send_cbs_to_orphanage(int cpu, struct rcu_state *rsp,
struct rcu_node *rnp, struct rcu_data *rdp)
{
- int i;
-
/*
* Orphan the callbacks. First adjust the counts. This is safe
* because ->onofflock excludes _rcu_barrier()'s adoption of
@@ -1339,7 +1349,7 @@
rsp->qlen += rdp->qlen;
rdp->n_cbs_orphaned += rdp->qlen;
rdp->qlen_lazy = 0;
- rdp->qlen = 0;
+ ACCESS_ONCE(rdp->qlen) = 0;
}
/*
@@ -1368,9 +1378,7 @@
}
/* Finally, initialize the rcu_data structure's list to empty. */
- rdp->nxtlist = NULL;
- for (i = 0; i < RCU_NEXT_SIZE; i++)
- rdp->nxttail[i] = &rdp->nxtlist;
+ init_callback_list(rdp);
}
/*
@@ -1397,6 +1405,8 @@
rdp->qlen_lazy += rsp->qlen_lazy;
rdp->qlen += rsp->qlen;
rdp->n_cbs_adopted += rsp->qlen;
+ if (rsp->qlen_lazy != rsp->qlen)
+ rcu_idle_count_callbacks_posted();
rsp->qlen_lazy = 0;
rsp->qlen = 0;
@@ -1502,6 +1512,9 @@
raw_spin_unlock_irqrestore(&rnp->lock, flags);
if (need_report & RCU_OFL_TASKS_EXP_GP)
rcu_report_exp_rnp(rsp, rnp, true);
+ WARN_ONCE(rdp->qlen != 0 || rdp->nxtlist != NULL,
+ "rcu_cleanup_dead_cpu: Callbacks on offline CPU %d: qlen=%lu, nxtlist=%p\n",
+ cpu, rdp->qlen, rdp->nxtlist);
}
#else /* #ifdef CONFIG_HOTPLUG_CPU */
@@ -1528,7 +1541,7 @@
{
unsigned long flags;
struct rcu_head *next, *list, **tail;
- int bl, count, count_lazy;
+ int bl, count, count_lazy, i;
/* If no callbacks are ready, just return.*/
if (!cpu_has_callbacks_ready_to_invoke(rdp)) {
@@ -1551,9 +1564,9 @@
rdp->nxtlist = *rdp->nxttail[RCU_DONE_TAIL];
*rdp->nxttail[RCU_DONE_TAIL] = NULL;
tail = rdp->nxttail[RCU_DONE_TAIL];
- for (count = RCU_NEXT_SIZE - 1; count >= 0; count--)
- if (rdp->nxttail[count] == rdp->nxttail[RCU_DONE_TAIL])
- rdp->nxttail[count] = &rdp->nxtlist;
+ for (i = RCU_NEXT_SIZE - 1; i >= 0; i--)
+ if (rdp->nxttail[i] == rdp->nxttail[RCU_DONE_TAIL])
+ rdp->nxttail[i] = &rdp->nxtlist;
local_irq_restore(flags);
/* Invoke callbacks. */
@@ -1581,15 +1594,15 @@
if (list != NULL) {
*tail = rdp->nxtlist;
rdp->nxtlist = list;
- for (count = 0; count < RCU_NEXT_SIZE; count++)
- if (&rdp->nxtlist == rdp->nxttail[count])
- rdp->nxttail[count] = tail;
+ for (i = 0; i < RCU_NEXT_SIZE; i++)
+ if (&rdp->nxtlist == rdp->nxttail[i])
+ rdp->nxttail[i] = tail;
else
break;
}
smp_mb(); /* List handling before counting for rcu_barrier(). */
rdp->qlen_lazy -= count_lazy;
- rdp->qlen -= count;
+ ACCESS_ONCE(rdp->qlen) -= count;
rdp->n_cbs_invoked += count;
/* Reinstate batch limit if we have worked down the excess. */
@@ -1602,6 +1615,7 @@
rdp->n_force_qs_snap = rsp->n_force_qs;
} else if (rdp->qlen < rdp->qlen_last_fqs_check - qhimark)
rdp->qlen_last_fqs_check = rdp->qlen;
+ WARN_ON_ONCE((rdp->nxtlist == NULL) != (rdp->qlen == 0));
local_irq_restore(flags);
@@ -1742,8 +1756,6 @@
break; /* grace period idle or initializing, ignore. */
case RCU_SAVE_DYNTICK:
- if (RCU_SIGNAL_INIT != RCU_SAVE_DYNTICK)
- break; /* So gcc recognizes the dead code. */
raw_spin_unlock(&rnp->lock); /* irqs remain disabled */
@@ -1785,9 +1797,10 @@
* whom the rdp belongs.
*/
static void
-__rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)
+__rcu_process_callbacks(struct rcu_state *rsp)
{
unsigned long flags;
+ struct rcu_data *rdp = __this_cpu_ptr(rsp->rda);
WARN_ON_ONCE(rdp->beenonline == 0);
@@ -1823,11 +1836,11 @@
*/
static void rcu_process_callbacks(struct softirq_action *unused)
{
+ struct rcu_state *rsp;
+
trace_rcu_utilization("Start RCU core");
- __rcu_process_callbacks(&rcu_sched_state,
- &__get_cpu_var(rcu_sched_data));
- __rcu_process_callbacks(&rcu_bh_state, &__get_cpu_var(rcu_bh_data));
- rcu_preempt_process_callbacks();
+ for_each_rcu_flavor(rsp)
+ __rcu_process_callbacks(rsp);
trace_rcu_utilization("End RCU core");
}
@@ -1854,50 +1867,22 @@
raise_softirq(RCU_SOFTIRQ);
}
-static void
-__call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
- struct rcu_state *rsp, bool lazy)
+/*
+ * Handle any core-RCU processing required by a call_rcu() invocation.
+ */
+static void __call_rcu_core(struct rcu_state *rsp, struct rcu_data *rdp,
+ struct rcu_head *head, unsigned long flags)
{
- unsigned long flags;
- struct rcu_data *rdp;
-
- WARN_ON_ONCE((unsigned long)head & 0x3); /* Misaligned rcu_head! */
- debug_rcu_head_queue(head);
- head->func = func;
- head->next = NULL;
-
- smp_mb(); /* Ensure RCU update seen before callback registry. */
-
/*
- * Opportunistically note grace-period endings and beginnings.
- * Note that we might see a beginning right after we see an
- * end, but never vice versa, since this CPU has to pass through
- * a quiescent state betweentimes.
+ * If called from an extended quiescent state, invoke the RCU
+ * core in order to force a re-evaluation of RCU's idleness.
*/
- local_irq_save(flags);
- rdp = this_cpu_ptr(rsp->rda);
+ if (rcu_is_cpu_idle() && cpu_online(smp_processor_id()))
+ invoke_rcu_core();
- /* Add the callback to our list. */
- rdp->qlen++;
- if (lazy)
- rdp->qlen_lazy++;
- else
- rcu_idle_count_callbacks_posted();
- smp_mb(); /* Count before adding callback for rcu_barrier(). */
- *rdp->nxttail[RCU_NEXT_TAIL] = head;
- rdp->nxttail[RCU_NEXT_TAIL] = &head->next;
-
- if (__is_kfree_rcu_offset((unsigned long)func))
- trace_rcu_kfree_callback(rsp->name, head, (unsigned long)func,
- rdp->qlen_lazy, rdp->qlen);
- else
- trace_rcu_callback(rsp->name, head, rdp->qlen_lazy, rdp->qlen);
-
- /* If interrupts were disabled, don't dive into RCU core. */
- if (irqs_disabled_flags(flags)) {
- local_irq_restore(flags);
+ /* If interrupts were disabled or CPU offline, don't invoke RCU core. */
+ if (irqs_disabled_flags(flags) || cpu_is_offline(smp_processor_id()))
return;
- }
/*
* Force the grace period if too many callbacks or too long waiting.
@@ -1930,6 +1915,49 @@
}
} else if (ULONG_CMP_LT(ACCESS_ONCE(rsp->jiffies_force_qs), jiffies))
force_quiescent_state(rsp, 1);
+}
+
+static void
+__call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
+ struct rcu_state *rsp, bool lazy)
+{
+ unsigned long flags;
+ struct rcu_data *rdp;
+
+ WARN_ON_ONCE((unsigned long)head & 0x3); /* Misaligned rcu_head! */
+ debug_rcu_head_queue(head);
+ head->func = func;
+ head->next = NULL;
+
+ smp_mb(); /* Ensure RCU update seen before callback registry. */
+
+ /*
+ * Opportunistically note grace-period endings and beginnings.
+ * Note that we might see a beginning right after we see an
+ * end, but never vice versa, since this CPU has to pass through
+ * a quiescent state betweentimes.
+ */
+ local_irq_save(flags);
+ rdp = this_cpu_ptr(rsp->rda);
+
+ /* Add the callback to our list. */
+ ACCESS_ONCE(rdp->qlen)++;
+ if (lazy)
+ rdp->qlen_lazy++;
+ else
+ rcu_idle_count_callbacks_posted();
+ smp_mb(); /* Count before adding callback for rcu_barrier(). */
+ *rdp->nxttail[RCU_NEXT_TAIL] = head;
+ rdp->nxttail[RCU_NEXT_TAIL] = &head->next;
+
+ if (__is_kfree_rcu_offset((unsigned long)func))
+ trace_rcu_kfree_callback(rsp->name, head, (unsigned long)func,
+ rdp->qlen_lazy, rdp->qlen);
+ else
+ trace_rcu_callback(rsp->name, head, rdp->qlen_lazy, rdp->qlen);
+
+ /* Go handle any RCU core processing required. */
+ __call_rcu_core(rsp, rdp, head, flags);
local_irq_restore(flags);
}
@@ -1959,28 +1987,16 @@
* occasionally incorrectly indicate that there are multiple CPUs online
* when there was in fact only one the whole time, as this just adds
* some overhead: RCU still operates correctly.
- *
- * Of course, sampling num_online_cpus() with preemption enabled can
- * give erroneous results if there are concurrent CPU-hotplug operations.
- * For example, given a demonic sequence of preemptions in num_online_cpus()
- * and CPU-hotplug operations, there could be two or more CPUs online at
- * all times, but num_online_cpus() might well return one (or even zero).
- *
- * However, all such demonic sequences require at least one CPU-offline
- * operation. Furthermore, rcu_blocking_is_gp() giving the wrong answer
- * is only a problem if there is an RCU read-side critical section executing
- * throughout. But RCU-sched and RCU-bh read-side critical sections
- * disable either preemption or bh, which prevents a CPU from going offline.
- * Therefore, the only way that rcu_blocking_is_gp() can incorrectly return
- * that there is only one CPU when in fact there was more than one throughout
- * is when there were no RCU readers in the system. If there are no
- * RCU readers, the grace period by definition can be of zero length,
- * regardless of the number of online CPUs.
*/
static inline int rcu_blocking_is_gp(void)
{
+ int ret;
+
might_sleep(); /* Check for RCU read-side critical section. */
- return num_online_cpus() <= 1;
+ preempt_disable();
+ ret = num_online_cpus() <= 1;
+ preempt_enable();
+ return ret;
}
/**
@@ -2115,9 +2131,9 @@
put_online_cpus();
/* No joy, try again later. Or just synchronize_sched(). */
- if (trycount++ < 10)
+ if (trycount++ < 10) {
udelay(trycount * num_online_cpus());
- else {
+ } else {
synchronize_sched();
return;
}
@@ -2238,9 +2254,12 @@
*/
static int rcu_pending(int cpu)
{
- return __rcu_pending(&rcu_sched_state, &per_cpu(rcu_sched_data, cpu)) ||
- __rcu_pending(&rcu_bh_state, &per_cpu(rcu_bh_data, cpu)) ||
- rcu_preempt_pending(cpu);
+ struct rcu_state *rsp;
+
+ for_each_rcu_flavor(rsp)
+ if (__rcu_pending(rsp, per_cpu_ptr(rsp->rda, cpu)))
+ return 1;
+ return 0;
}
/*
@@ -2250,20 +2269,41 @@
*/
static int rcu_cpu_has_callbacks(int cpu)
{
+ struct rcu_state *rsp;
+
/* RCU callbacks either ready or pending? */
- return per_cpu(rcu_sched_data, cpu).nxtlist ||
- per_cpu(rcu_bh_data, cpu).nxtlist ||
- rcu_preempt_cpu_has_callbacks(cpu);
+ for_each_rcu_flavor(rsp)
+ if (per_cpu_ptr(rsp->rda, cpu)->nxtlist)
+ return 1;
+ return 0;
+}
+
+/*
+ * Helper function for _rcu_barrier() tracing. If tracing is disabled,
+ * the compiler is expected to optimize this away.
+ */
+static void _rcu_barrier_trace(struct rcu_state *rsp, char *s,
+ int cpu, unsigned long done)
+{
+ trace_rcu_barrier(rsp->name, s, cpu,
+ atomic_read(&rsp->barrier_cpu_count), done);
}
/*
* RCU callback function for _rcu_barrier(). If we are last, wake
* up the task executing _rcu_barrier().
*/
-static void rcu_barrier_callback(struct rcu_head *notused)
+static void rcu_barrier_callback(struct rcu_head *rhp)
{
- if (atomic_dec_and_test(&rcu_barrier_cpu_count))
- complete(&rcu_barrier_completion);
+ struct rcu_data *rdp = container_of(rhp, struct rcu_data, barrier_head);
+ struct rcu_state *rsp = rdp->rsp;
+
+ if (atomic_dec_and_test(&rsp->barrier_cpu_count)) {
+ _rcu_barrier_trace(rsp, "LastCB", -1, rsp->n_barrier_done);
+ complete(&rsp->barrier_completion);
+ } else {
+ _rcu_barrier_trace(rsp, "CB", -1, rsp->n_barrier_done);
+ }
}
/*
@@ -2271,35 +2311,63 @@
*/
static void rcu_barrier_func(void *type)
{
- int cpu = smp_processor_id();
- struct rcu_head *head = &per_cpu(rcu_barrier_head, cpu);
- void (*call_rcu_func)(struct rcu_head *head,
- void (*func)(struct rcu_head *head));
+ struct rcu_state *rsp = type;
+ struct rcu_data *rdp = __this_cpu_ptr(rsp->rda);
- atomic_inc(&rcu_barrier_cpu_count);
- call_rcu_func = type;
- call_rcu_func(head, rcu_barrier_callback);
+ _rcu_barrier_trace(rsp, "IRQ", -1, rsp->n_barrier_done);
+ atomic_inc(&rsp->barrier_cpu_count);
+ rsp->call(&rdp->barrier_head, rcu_barrier_callback);
}
/*
* Orchestrate the specified type of RCU barrier, waiting for all
* RCU callbacks of the specified type to complete.
*/
-static void _rcu_barrier(struct rcu_state *rsp,
- void (*call_rcu_func)(struct rcu_head *head,
- void (*func)(struct rcu_head *head)))
+static void _rcu_barrier(struct rcu_state *rsp)
{
int cpu;
unsigned long flags;
struct rcu_data *rdp;
- struct rcu_head rh;
+ struct rcu_data rd;
+ unsigned long snap = ACCESS_ONCE(rsp->n_barrier_done);
+ unsigned long snap_done;
- init_rcu_head_on_stack(&rh);
+ init_rcu_head_on_stack(&rd.barrier_head);
+ _rcu_barrier_trace(rsp, "Begin", -1, snap);
/* Take mutex to serialize concurrent rcu_barrier() requests. */
- mutex_lock(&rcu_barrier_mutex);
+ mutex_lock(&rsp->barrier_mutex);
- smp_mb(); /* Prevent any prior operations from leaking in. */
+ /*
+ * Ensure that all prior references, including to ->n_barrier_done,
+ * are ordered before the _rcu_barrier() machinery.
+ */
+ smp_mb(); /* See above block comment. */
+
+ /*
+ * Recheck ->n_barrier_done to see if others did our work for us.
+ * This means checking ->n_barrier_done for an even-to-odd-to-even
+ * transition. The "if" expression below therefore rounds the old
+ * value up to the next even number and adds two before comparing.
+ */
+ snap_done = ACCESS_ONCE(rsp->n_barrier_done);
+ _rcu_barrier_trace(rsp, "Check", -1, snap_done);
+ if (ULONG_CMP_GE(snap_done, ((snap + 1) & ~0x1) + 2)) {
+ _rcu_barrier_trace(rsp, "EarlyExit", -1, snap_done);
+ smp_mb(); /* caller's subsequent code after above check. */
+ mutex_unlock(&rsp->barrier_mutex);
+ return;
+ }
+
+ /*
+ * Increment ->n_barrier_done to avoid duplicate work. Use
+ * ACCESS_ONCE() to prevent the compiler from speculating
+ * the increment to precede the early-exit check.
+ */
+ ACCESS_ONCE(rsp->n_barrier_done)++;
+ WARN_ON_ONCE((rsp->n_barrier_done & 0x1) != 1);
+ _rcu_barrier_trace(rsp, "Inc1", -1, rsp->n_barrier_done);
+ smp_mb(); /* Order ->n_barrier_done increment with below mechanism. */
/*
* Initialize the count to one rather than to zero in order to
@@ -2318,8 +2386,8 @@
* 6. Both rcu_barrier_callback() callbacks are invoked, awakening
* us -- but before CPU 1's orphaned callbacks are invoked!!!
*/
- init_completion(&rcu_barrier_completion);
- atomic_set(&rcu_barrier_cpu_count, 1);
+ init_completion(&rsp->barrier_completion);
+ atomic_set(&rsp->barrier_cpu_count, 1);
raw_spin_lock_irqsave(&rsp->onofflock, flags);
rsp->rcu_barrier_in_progress = current;
raw_spin_unlock_irqrestore(&rsp->onofflock, flags);
@@ -2335,14 +2403,19 @@
preempt_disable();
rdp = per_cpu_ptr(rsp->rda, cpu);
if (cpu_is_offline(cpu)) {
+ _rcu_barrier_trace(rsp, "Offline", cpu,
+ rsp->n_barrier_done);
preempt_enable();
while (cpu_is_offline(cpu) && ACCESS_ONCE(rdp->qlen))
schedule_timeout_interruptible(1);
} else if (ACCESS_ONCE(rdp->qlen)) {
- smp_call_function_single(cpu, rcu_barrier_func,
- (void *)call_rcu_func, 1);
+ _rcu_barrier_trace(rsp, "OnlineQ", cpu,
+ rsp->n_barrier_done);
+ smp_call_function_single(cpu, rcu_barrier_func, rsp, 1);
preempt_enable();
} else {
+ _rcu_barrier_trace(rsp, "OnlineNQ", cpu,
+ rsp->n_barrier_done);
preempt_enable();
}
}
@@ -2359,24 +2432,32 @@
rcu_adopt_orphan_cbs(rsp);
rsp->rcu_barrier_in_progress = NULL;
raw_spin_unlock_irqrestore(&rsp->onofflock, flags);
- atomic_inc(&rcu_barrier_cpu_count);
+ atomic_inc(&rsp->barrier_cpu_count);
smp_mb__after_atomic_inc(); /* Ensure atomic_inc() before callback. */
- call_rcu_func(&rh, rcu_barrier_callback);
+ rd.rsp = rsp;
+ rsp->call(&rd.barrier_head, rcu_barrier_callback);
/*
* Now that we have an rcu_barrier_callback() callback on each
* CPU, and thus each counted, remove the initial count.
*/
- if (atomic_dec_and_test(&rcu_barrier_cpu_count))
- complete(&rcu_barrier_completion);
+ if (atomic_dec_and_test(&rsp->barrier_cpu_count))
+ complete(&rsp->barrier_completion);
+
+ /* Increment ->n_barrier_done to prevent duplicate work. */
+ smp_mb(); /* Keep increment after above mechanism. */
+ ACCESS_ONCE(rsp->n_barrier_done)++;
+ WARN_ON_ONCE((rsp->n_barrier_done & 0x1) != 0);
+ _rcu_barrier_trace(rsp, "Inc2", -1, rsp->n_barrier_done);
+ smp_mb(); /* Keep increment before caller's subsequent code. */
/* Wait for all rcu_barrier_callback() callbacks to be invoked. */
- wait_for_completion(&rcu_barrier_completion);
+ wait_for_completion(&rsp->barrier_completion);
/* Other rcu_barrier() invocations can now safely proceed. */
- mutex_unlock(&rcu_barrier_mutex);
+ mutex_unlock(&rsp->barrier_mutex);
- destroy_rcu_head_on_stack(&rh);
+ destroy_rcu_head_on_stack(&rd.barrier_head);
}
/**
@@ -2384,7 +2465,7 @@
*/
void rcu_barrier_bh(void)
{
- _rcu_barrier(&rcu_bh_state, call_rcu_bh);
+ _rcu_barrier(&rcu_bh_state);
}
EXPORT_SYMBOL_GPL(rcu_barrier_bh);
@@ -2393,7 +2474,7 @@
*/
void rcu_barrier_sched(void)
{
- _rcu_barrier(&rcu_sched_state, call_rcu_sched);
+ _rcu_barrier(&rcu_sched_state);
}
EXPORT_SYMBOL_GPL(rcu_barrier_sched);
@@ -2404,18 +2485,15 @@
rcu_boot_init_percpu_data(int cpu, struct rcu_state *rsp)
{
unsigned long flags;
- int i;
struct rcu_data *rdp = per_cpu_ptr(rsp->rda, cpu);
struct rcu_node *rnp = rcu_get_root(rsp);
/* Set up local state, ensuring consistent view of global state. */
raw_spin_lock_irqsave(&rnp->lock, flags);
rdp->grpmask = 1UL << (cpu - rdp->mynode->grplo);
- rdp->nxtlist = NULL;
- for (i = 0; i < RCU_NEXT_SIZE; i++)
- rdp->nxttail[i] = &rdp->nxtlist;
+ init_callback_list(rdp);
rdp->qlen_lazy = 0;
- rdp->qlen = 0;
+ ACCESS_ONCE(rdp->qlen) = 0;
rdp->dynticks = &per_cpu(rcu_dynticks, cpu);
WARN_ON_ONCE(rdp->dynticks->dynticks_nesting != DYNTICK_TASK_EXIT_IDLE);
WARN_ON_ONCE(atomic_read(&rdp->dynticks->dynticks) != 1);
@@ -2489,9 +2567,11 @@
static void __cpuinit rcu_prepare_cpu(int cpu)
{
- rcu_init_percpu_data(cpu, &rcu_sched_state, 0);
- rcu_init_percpu_data(cpu, &rcu_bh_state, 0);
- rcu_preempt_init_percpu_data(cpu);
+ struct rcu_state *rsp;
+
+ for_each_rcu_flavor(rsp)
+ rcu_init_percpu_data(cpu, rsp,
+ strcmp(rsp->name, "rcu_preempt") == 0);
}
/*
@@ -2503,6 +2583,7 @@
long cpu = (long)hcpu;
struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
struct rcu_node *rnp = rdp->mynode;
+ struct rcu_state *rsp;
trace_rcu_utilization("Start CPU hotplug");
switch (action) {
@@ -2527,18 +2608,16 @@
* touch any data without introducing corruption. We send the
* dying CPU's callbacks to an arbitrarily chosen online CPU.
*/
- rcu_cleanup_dying_cpu(&rcu_bh_state);
- rcu_cleanup_dying_cpu(&rcu_sched_state);
- rcu_preempt_cleanup_dying_cpu();
+ for_each_rcu_flavor(rsp)
+ rcu_cleanup_dying_cpu(rsp);
rcu_cleanup_after_idle(cpu);
break;
case CPU_DEAD:
case CPU_DEAD_FROZEN:
case CPU_UP_CANCELED:
case CPU_UP_CANCELED_FROZEN:
- rcu_cleanup_dead_cpu(cpu, &rcu_bh_state);
- rcu_cleanup_dead_cpu(cpu, &rcu_sched_state);
- rcu_preempt_cleanup_dead_cpu(cpu);
+ for_each_rcu_flavor(rsp)
+ rcu_cleanup_dead_cpu(cpu, rsp);
break;
default:
break;
@@ -2571,9 +2650,9 @@
{
int i;
- for (i = NUM_RCU_LVLS - 1; i > 0; i--)
+ for (i = rcu_num_lvls - 1; i > 0; i--)
rsp->levelspread[i] = CONFIG_RCU_FANOUT;
- rsp->levelspread[0] = CONFIG_RCU_FANOUT_LEAF;
+ rsp->levelspread[0] = rcu_fanout_leaf;
}
#else /* #ifdef CONFIG_RCU_FANOUT_EXACT */
static void __init rcu_init_levelspread(struct rcu_state *rsp)
@@ -2583,7 +2662,7 @@
int i;
cprv = NR_CPUS;
- for (i = NUM_RCU_LVLS - 1; i >= 0; i--) {
+ for (i = rcu_num_lvls - 1; i >= 0; i--) {
ccur = rsp->levelcnt[i];
rsp->levelspread[i] = (cprv + ccur - 1) / ccur;
cprv = ccur;
@@ -2610,13 +2689,15 @@
/* Initialize the level-tracking arrays. */
- for (i = 1; i < NUM_RCU_LVLS; i++)
+ for (i = 0; i < rcu_num_lvls; i++)
+ rsp->levelcnt[i] = num_rcu_lvl[i];
+ for (i = 1; i < rcu_num_lvls; i++)
rsp->level[i] = rsp->level[i - 1] + rsp->levelcnt[i - 1];
rcu_init_levelspread(rsp);
/* Initialize the elements themselves, starting from the leaves. */
- for (i = NUM_RCU_LVLS - 1; i >= 0; i--) {
+ for (i = rcu_num_lvls - 1; i >= 0; i--) {
cpustride *= rsp->levelspread[i];
rnp = rsp->level[i];
for (j = 0; j < rsp->levelcnt[i]; j++, rnp++) {
@@ -2646,13 +2727,74 @@
}
rsp->rda = rda;
- rnp = rsp->level[NUM_RCU_LVLS - 1];
+ rnp = rsp->level[rcu_num_lvls - 1];
for_each_possible_cpu(i) {
while (i > rnp->grphi)
rnp++;
per_cpu_ptr(rsp->rda, i)->mynode = rnp;
rcu_boot_init_percpu_data(i, rsp);
}
+ list_add(&rsp->flavors, &rcu_struct_flavors);
+}
+
+/*
+ * Compute the rcu_node tree geometry from kernel parameters. This cannot
+ * replace the definitions in rcutree.h because those are needed to size
+ * the ->node array in the rcu_state structure.
+ */
+static void __init rcu_init_geometry(void)
+{
+ int i;
+ int j;
+ int n = nr_cpu_ids;
+ int rcu_capacity[MAX_RCU_LVLS + 1];
+
+ /* If the compile-time values are accurate, just leave. */
+ if (rcu_fanout_leaf == CONFIG_RCU_FANOUT_LEAF)
+ return;
+
+ /*
+ * Compute number of nodes that can be handled an rcu_node tree
+ * with the given number of levels. Setting rcu_capacity[0] makes
+ * some of the arithmetic easier.
+ */
+ rcu_capacity[0] = 1;
+ rcu_capacity[1] = rcu_fanout_leaf;
+ for (i = 2; i <= MAX_RCU_LVLS; i++)
+ rcu_capacity[i] = rcu_capacity[i - 1] * CONFIG_RCU_FANOUT;
+
+ /*
+ * The boot-time rcu_fanout_leaf parameter is only permitted
+ * to increase the leaf-level fanout, not decrease it. Of course,
+ * the leaf-level fanout cannot exceed the number of bits in
+ * the rcu_node masks. Finally, the tree must be able to accommodate
+ * the configured number of CPUs. Complain and fall back to the
+ * compile-time values if these limits are exceeded.
+ */
+ if (rcu_fanout_leaf < CONFIG_RCU_FANOUT_LEAF ||
+ rcu_fanout_leaf > sizeof(unsigned long) * 8 ||
+ n > rcu_capacity[MAX_RCU_LVLS]) {
+ WARN_ON(1);
+ return;
+ }
+
+ /* Calculate the number of rcu_nodes at each level of the tree. */
+ for (i = 1; i <= MAX_RCU_LVLS; i++)
+ if (n <= rcu_capacity[i]) {
+ for (j = 0; j <= i; j++)
+ num_rcu_lvl[j] =
+ DIV_ROUND_UP(n, rcu_capacity[i - j]);
+ rcu_num_lvls = i;
+ for (j = i + 1; j <= MAX_RCU_LVLS; j++)
+ num_rcu_lvl[j] = 0;
+ break;
+ }
+
+ /* Calculate the total number of rcu_node structures. */
+ rcu_num_nodes = 0;
+ for (i = 0; i <= MAX_RCU_LVLS; i++)
+ rcu_num_nodes += num_rcu_lvl[i];
+ rcu_num_nodes -= n;
}
void __init rcu_init(void)
@@ -2660,6 +2802,7 @@
int cpu;
rcu_bootup_announce();
+ rcu_init_geometry();
rcu_init_one(&rcu_sched_state, &rcu_sched_data);
rcu_init_one(&rcu_bh_state, &rcu_bh_data);
__rcu_init_preempt();
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index 7f5d138..4d29169 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -42,28 +42,28 @@
#define RCU_FANOUT_4 (RCU_FANOUT_3 * CONFIG_RCU_FANOUT)
#if NR_CPUS <= RCU_FANOUT_1
-# define NUM_RCU_LVLS 1
+# define RCU_NUM_LVLS 1
# define NUM_RCU_LVL_0 1
# define NUM_RCU_LVL_1 (NR_CPUS)
# define NUM_RCU_LVL_2 0
# define NUM_RCU_LVL_3 0
# define NUM_RCU_LVL_4 0
#elif NR_CPUS <= RCU_FANOUT_2
-# define NUM_RCU_LVLS 2
+# define RCU_NUM_LVLS 2
# define NUM_RCU_LVL_0 1
# define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
# define NUM_RCU_LVL_2 (NR_CPUS)
# define NUM_RCU_LVL_3 0
# define NUM_RCU_LVL_4 0
#elif NR_CPUS <= RCU_FANOUT_3
-# define NUM_RCU_LVLS 3
+# define RCU_NUM_LVLS 3
# define NUM_RCU_LVL_0 1
# define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_2)
# define NUM_RCU_LVL_2 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
# define NUM_RCU_LVL_3 (NR_CPUS)
# define NUM_RCU_LVL_4 0
#elif NR_CPUS <= RCU_FANOUT_4
-# define NUM_RCU_LVLS 4
+# define RCU_NUM_LVLS 4
# define NUM_RCU_LVL_0 1
# define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_3)
# define NUM_RCU_LVL_2 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_2)
@@ -76,6 +76,9 @@
#define RCU_SUM (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3 + NUM_RCU_LVL_4)
#define NUM_RCU_NODES (RCU_SUM - NR_CPUS)
+extern int rcu_num_lvls;
+extern int rcu_num_nodes;
+
/*
* Dynticks per-CPU state.
*/
@@ -84,6 +87,21 @@
/* Process level is worth LLONG_MAX/2. */
int dynticks_nmi_nesting; /* Track NMI nesting level. */
atomic_t dynticks; /* Even value for idle, else odd. */
+#ifdef CONFIG_RCU_FAST_NO_HZ
+ int dyntick_drain; /* Prepare-for-idle state variable. */
+ unsigned long dyntick_holdoff;
+ /* No retries for the jiffy of failure. */
+ struct timer_list idle_gp_timer;
+ /* Wake up CPU sleeping with callbacks. */
+ unsigned long idle_gp_timer_expires;
+ /* When to wake up CPU (for repost). */
+ bool idle_first_pass; /* First pass of attempt to go idle? */
+ unsigned long nonlazy_posted;
+ /* # times non-lazy CBs posted to CPU. */
+ unsigned long nonlazy_posted_snap;
+ /* idle-period nonlazy_posted snapshot. */
+ int tick_nohz_enabled_snap; /* Previously seen value from sysfs. */
+#endif /* #ifdef CONFIG_RCU_FAST_NO_HZ */
};
/* RCU's kthread states for tracing. */
@@ -192,7 +210,7 @@
*/
#define rcu_for_each_node_breadth_first(rsp, rnp) \
for ((rnp) = &(rsp)->node[0]; \
- (rnp) < &(rsp)->node[NUM_RCU_NODES]; (rnp)++)
+ (rnp) < &(rsp)->node[rcu_num_nodes]; (rnp)++)
/*
* Do a breadth-first scan of the non-leaf rcu_node structures for the
@@ -201,7 +219,7 @@
*/
#define rcu_for_each_nonleaf_node_breadth_first(rsp, rnp) \
for ((rnp) = &(rsp)->node[0]; \
- (rnp) < (rsp)->level[NUM_RCU_LVLS - 1]; (rnp)++)
+ (rnp) < (rsp)->level[rcu_num_lvls - 1]; (rnp)++)
/*
* Scan the leaves of the rcu_node hierarchy for the specified rcu_state
@@ -210,8 +228,8 @@
* It is still a leaf node, even if it is also the root node.
*/
#define rcu_for_each_leaf_node(rsp, rnp) \
- for ((rnp) = (rsp)->level[NUM_RCU_LVLS - 1]; \
- (rnp) < &(rsp)->node[NUM_RCU_NODES]; (rnp)++)
+ for ((rnp) = (rsp)->level[rcu_num_lvls - 1]; \
+ (rnp) < &(rsp)->node[rcu_num_nodes]; (rnp)++)
/* Index values for nxttail array in struct rcu_data. */
#define RCU_DONE_TAIL 0 /* Also RCU_WAIT head. */
@@ -297,6 +315,9 @@
unsigned long n_rp_need_fqs;
unsigned long n_rp_need_nothing;
+ /* 6) _rcu_barrier() callback. */
+ struct rcu_head barrier_head;
+
int cpu;
struct rcu_state *rsp;
};
@@ -343,10 +364,12 @@
*/
struct rcu_state {
struct rcu_node node[NUM_RCU_NODES]; /* Hierarchy. */
- struct rcu_node *level[NUM_RCU_LVLS]; /* Hierarchy levels. */
+ struct rcu_node *level[RCU_NUM_LVLS]; /* Hierarchy levels. */
u32 levelcnt[MAX_RCU_LVLS + 1]; /* # nodes in each level. */
- u8 levelspread[NUM_RCU_LVLS]; /* kids/node in each level. */
+ u8 levelspread[RCU_NUM_LVLS]; /* kids/node in each level. */
struct rcu_data __percpu *rda; /* pointer of percu rcu_data. */
+ void (*call)(struct rcu_head *head, /* call_rcu() flavor. */
+ void (*func)(struct rcu_head *head));
/* The following fields are guarded by the root rcu_node's lock. */
@@ -378,6 +401,11 @@
struct task_struct *rcu_barrier_in_progress;
/* Task doing rcu_barrier(), */
/* or NULL if no barrier. */
+ struct mutex barrier_mutex; /* Guards barrier fields. */
+ atomic_t barrier_cpu_count; /* # CPUs waiting on. */
+ struct completion barrier_completion; /* Wake at barrier end. */
+ unsigned long n_barrier_done; /* ++ at start and end of */
+ /* _rcu_barrier(). */
raw_spinlock_t fqslock; /* Only one task forcing */
/* quiescent states. */
unsigned long jiffies_force_qs; /* Time at which to invoke */
@@ -395,8 +423,13 @@
unsigned long gp_max; /* Maximum GP duration in */
/* jiffies. */
char *name; /* Name of structure. */
+ struct list_head flavors; /* List of RCU flavors. */
};
+extern struct list_head rcu_struct_flavors;
+#define for_each_rcu_flavor(rsp) \
+ list_for_each_entry((rsp), &rcu_struct_flavors, flavors)
+
/* Return values for rcu_preempt_offline_tasks(). */
#define RCU_OFL_TASKS_NORM_GP 0x1 /* Tasks blocking normal */
@@ -430,6 +463,7 @@
/* Forward declarations for rcutree_plugin.h */
static void rcu_bootup_announce(void);
long rcu_batches_completed(void);
+static void rcu_preempt_note_context_switch(int cpu);
static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp);
#ifdef CONFIG_HOTPLUG_CPU
static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp,
@@ -438,25 +472,18 @@
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
static void rcu_print_detail_task_stall(struct rcu_state *rsp);
static int rcu_print_task_stall(struct rcu_node *rnp);
-static void rcu_preempt_stall_reset(void);
static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp);
#ifdef CONFIG_HOTPLUG_CPU
static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
struct rcu_node *rnp,
struct rcu_data *rdp);
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
-static void rcu_preempt_cleanup_dead_cpu(int cpu);
static void rcu_preempt_check_callbacks(int cpu);
-static void rcu_preempt_process_callbacks(void);
void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu));
#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_TREE_PREEMPT_RCU)
static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp,
bool wake);
#endif /* #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_TREE_PREEMPT_RCU) */
-static int rcu_preempt_pending(int cpu);
-static int rcu_preempt_cpu_has_callbacks(int cpu);
-static void __cpuinit rcu_preempt_init_percpu_data(int cpu);
-static void rcu_preempt_cleanup_dying_cpu(void);
static void __init __rcu_init_preempt(void);
static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags);
static void rcu_preempt_boost_start_gp(struct rcu_node *rnp);
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index 2411000..7f3244c 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -68,17 +68,21 @@
printk(KERN_INFO "\tAdditional per-CPU info printed with stalls.\n");
#endif
#if NUM_RCU_LVL_4 != 0
- printk(KERN_INFO "\tExperimental four-level hierarchy is enabled.\n");
+ printk(KERN_INFO "\tFour-level hierarchy is enabled.\n");
#endif
+ if (rcu_fanout_leaf != CONFIG_RCU_FANOUT_LEAF)
+ printk(KERN_INFO "\tExperimental boot-time adjustment of leaf fanout to %d.\n", rcu_fanout_leaf);
+ if (nr_cpu_ids != NR_CPUS)
+ printk(KERN_INFO "\tRCU restricting CPUs from NR_CPUS=%d to nr_cpu_ids=%d.\n", NR_CPUS, nr_cpu_ids);
}
#ifdef CONFIG_TREE_PREEMPT_RCU
-struct rcu_state rcu_preempt_state = RCU_STATE_INITIALIZER(rcu_preempt);
+struct rcu_state rcu_preempt_state =
+ RCU_STATE_INITIALIZER(rcu_preempt, call_rcu);
DEFINE_PER_CPU(struct rcu_data, rcu_preempt_data);
static struct rcu_state *rcu_state = &rcu_preempt_state;
-static void rcu_read_unlock_special(struct task_struct *t);
static int rcu_preempted_readers_exp(struct rcu_node *rnp);
/*
@@ -153,7 +157,7 @@
*
* Caller must disable preemption.
*/
-void rcu_preempt_note_context_switch(void)
+static void rcu_preempt_note_context_switch(int cpu)
{
struct task_struct *t = current;
unsigned long flags;
@@ -164,7 +168,7 @@
(t->rcu_read_unlock_special & RCU_READ_UNLOCK_BLOCKED) == 0) {
/* Possibly blocking in an RCU read-side critical section. */
- rdp = __this_cpu_ptr(rcu_preempt_state.rda);
+ rdp = per_cpu_ptr(rcu_preempt_state.rda, cpu);
rnp = rdp->mynode;
raw_spin_lock_irqsave(&rnp->lock, flags);
t->rcu_read_unlock_special |= RCU_READ_UNLOCK_BLOCKED;
@@ -228,23 +232,11 @@
* means that we continue to block the current grace period.
*/
local_irq_save(flags);
- rcu_preempt_qs(smp_processor_id());
+ rcu_preempt_qs(cpu);
local_irq_restore(flags);
}
/*
- * Tree-preemptible RCU implementation for rcu_read_lock().
- * Just increment ->rcu_read_lock_nesting, shared state will be updated
- * if we block.
- */
-void __rcu_read_lock(void)
-{
- current->rcu_read_lock_nesting++;
- barrier(); /* needed if we ever invoke rcu_read_lock in rcutree.c */
-}
-EXPORT_SYMBOL_GPL(__rcu_read_lock);
-
-/*
* Check for preempted RCU readers blocking the current grace period
* for the specified rcu_node structure. If the caller needs a reliable
* answer, it must hold the rcu_node's ->lock.
@@ -310,7 +302,7 @@
* notify RCU core processing or task having blocked during the RCU
* read-side critical section.
*/
-static noinline void rcu_read_unlock_special(struct task_struct *t)
+void rcu_read_unlock_special(struct task_struct *t)
{
int empty;
int empty_exp;
@@ -398,8 +390,9 @@
rnp->grphi,
!!rnp->gp_tasks);
rcu_report_unblock_qs_rnp(rnp, flags);
- } else
+ } else {
raw_spin_unlock_irqrestore(&rnp->lock, flags);
+ }
#ifdef CONFIG_RCU_BOOST
/* Unboost if we were boosted. */
@@ -418,38 +411,6 @@
}
}
-/*
- * Tree-preemptible RCU implementation for rcu_read_unlock().
- * Decrement ->rcu_read_lock_nesting. If the result is zero (outermost
- * rcu_read_unlock()) and ->rcu_read_unlock_special is non-zero, then
- * invoke rcu_read_unlock_special() to clean up after a context switch
- * in an RCU read-side critical section and other special cases.
- */
-void __rcu_read_unlock(void)
-{
- struct task_struct *t = current;
-
- if (t->rcu_read_lock_nesting != 1)
- --t->rcu_read_lock_nesting;
- else {
- barrier(); /* critical section before exit code. */
- t->rcu_read_lock_nesting = INT_MIN;
- barrier(); /* assign before ->rcu_read_unlock_special load */
- if (unlikely(ACCESS_ONCE(t->rcu_read_unlock_special)))
- rcu_read_unlock_special(t);
- barrier(); /* ->rcu_read_unlock_special load before assign */
- t->rcu_read_lock_nesting = 0;
- }
-#ifdef CONFIG_PROVE_LOCKING
- {
- int rrln = ACCESS_ONCE(t->rcu_read_lock_nesting);
-
- WARN_ON_ONCE(rrln < 0 && rrln > INT_MIN / 2);
- }
-#endif /* #ifdef CONFIG_PROVE_LOCKING */
-}
-EXPORT_SYMBOL_GPL(__rcu_read_unlock);
-
#ifdef CONFIG_RCU_CPU_STALL_VERBOSE
/*
@@ -540,16 +501,6 @@
}
/*
- * Suppress preemptible RCU's CPU stall warnings by pushing the
- * time of the next stall-warning message comfortably far into the
- * future.
- */
-static void rcu_preempt_stall_reset(void)
-{
- rcu_preempt_state.jiffies_stall = jiffies + ULONG_MAX / 2;
-}
-
-/*
* Check that the list of blocked tasks for the newly completed grace
* period is in fact empty. It is a serious bug to complete a grace
* period that still has RCU readers blocked! This function must be
@@ -650,14 +601,6 @@
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
/*
- * Do CPU-offline processing for preemptible RCU.
- */
-static void rcu_preempt_cleanup_dead_cpu(int cpu)
-{
- rcu_cleanup_dead_cpu(cpu, &rcu_preempt_state);
-}
-
-/*
* Check for a quiescent state from the current CPU. When a task blocks,
* the task is recorded in the corresponding CPU's rcu_node structure,
* which is checked elsewhere.
@@ -677,15 +620,6 @@
t->rcu_read_unlock_special |= RCU_READ_UNLOCK_NEED_QS;
}
-/*
- * Process callbacks for preemptible RCU.
- */
-static void rcu_preempt_process_callbacks(void)
-{
- __rcu_process_callbacks(&rcu_preempt_state,
- &__get_cpu_var(rcu_preempt_data));
-}
-
#ifdef CONFIG_RCU_BOOST
static void rcu_preempt_do_callbacks(void)
@@ -824,9 +758,9 @@
int must_wait = 0;
raw_spin_lock_irqsave(&rnp->lock, flags);
- if (list_empty(&rnp->blkd_tasks))
+ if (list_empty(&rnp->blkd_tasks)) {
raw_spin_unlock_irqrestore(&rnp->lock, flags);
- else {
+ } else {
rnp->exp_tasks = rnp->blkd_tasks.next;
rcu_initiate_boost(rnp, flags); /* releases rnp->lock */
must_wait = 1;
@@ -870,9 +804,9 @@
* expedited grace period for us, just leave.
*/
while (!mutex_trylock(&sync_rcu_preempt_exp_mutex)) {
- if (trycount++ < 10)
+ if (trycount++ < 10) {
udelay(trycount * num_online_cpus());
- else {
+ } else {
synchronize_rcu();
return;
}
@@ -917,51 +851,16 @@
}
EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);
-/*
- * Check to see if there is any immediate preemptible-RCU-related work
- * to be done.
- */
-static int rcu_preempt_pending(int cpu)
-{
- return __rcu_pending(&rcu_preempt_state,
- &per_cpu(rcu_preempt_data, cpu));
-}
-
-/*
- * Does preemptible RCU have callbacks on this CPU?
- */
-static int rcu_preempt_cpu_has_callbacks(int cpu)
-{
- return !!per_cpu(rcu_preempt_data, cpu).nxtlist;
-}
-
/**
* rcu_barrier - Wait until all in-flight call_rcu() callbacks complete.
*/
void rcu_barrier(void)
{
- _rcu_barrier(&rcu_preempt_state, call_rcu);
+ _rcu_barrier(&rcu_preempt_state);
}
EXPORT_SYMBOL_GPL(rcu_barrier);
/*
- * Initialize preemptible RCU's per-CPU data.
- */
-static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
-{
- rcu_init_percpu_data(cpu, &rcu_preempt_state, 1);
-}
-
-/*
- * Move preemptible RCU's callbacks from dying CPU to other online CPU
- * and record a quiescent state.
- */
-static void rcu_preempt_cleanup_dying_cpu(void)
-{
- rcu_cleanup_dying_cpu(&rcu_preempt_state);
-}
-
-/*
* Initialize preemptible RCU's state structures.
*/
static void __init __rcu_init_preempt(void)
@@ -1002,6 +901,14 @@
EXPORT_SYMBOL_GPL(rcu_force_quiescent_state);
/*
+ * Because preemptible RCU does not exist, we never have to check for
+ * CPUs being in quiescent states.
+ */
+static void rcu_preempt_note_context_switch(int cpu)
+{
+}
+
+/*
* Because preemptible RCU does not exist, there are never any preempted
* RCU readers.
*/
@@ -1038,14 +945,6 @@
}
/*
- * Because preemptible RCU does not exist, there is no need to suppress
- * its CPU stall warnings.
- */
-static void rcu_preempt_stall_reset(void)
-{
-}
-
-/*
* Because there is no preemptible RCU, there can be no readers blocked,
* so there is no need to check for blocked tasks. So check only for
* bogus qsmask values.
@@ -1073,14 +972,6 @@
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
/*
- * Because preemptible RCU does not exist, it never needs CPU-offline
- * processing.
- */
-static void rcu_preempt_cleanup_dead_cpu(int cpu)
-{
-}
-
-/*
* Because preemptible RCU does not exist, it never has any callbacks
* to check.
*/
@@ -1089,14 +980,6 @@
}
/*
- * Because preemptible RCU does not exist, it never has any callbacks
- * to process.
- */
-static void rcu_preempt_process_callbacks(void)
-{
-}
-
-/*
* Queue an RCU callback for lazy invocation after a grace period.
* This will likely be later named something like "call_rcu_lazy()",
* but this change will require some way of tagging the lazy RCU
@@ -1137,22 +1020,6 @@
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
/*
- * Because preemptible RCU does not exist, it never has any work to do.
- */
-static int rcu_preempt_pending(int cpu)
-{
- return 0;
-}
-
-/*
- * Because preemptible RCU does not exist, it never has callbacks
- */
-static int rcu_preempt_cpu_has_callbacks(int cpu)
-{
- return 0;
-}
-
-/*
* Because preemptible RCU does not exist, rcu_barrier() is just
* another name for rcu_barrier_sched().
*/
@@ -1163,21 +1030,6 @@
EXPORT_SYMBOL_GPL(rcu_barrier);
/*
- * Because preemptible RCU does not exist, there is no per-CPU
- * data to initialize.
- */
-static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
-{
-}
-
-/*
- * Because there is no preemptible RCU, there is no cleanup to do.
- */
-static void rcu_preempt_cleanup_dying_cpu(void)
-{
-}
-
-/*
* Because preemptible RCU does not exist, it need not be initialized.
*/
static void __init __rcu_init_preempt(void)
@@ -1886,8 +1738,9 @@
* Because we not have RCU_FAST_NO_HZ, just check whether this CPU needs
* any flavor of RCU.
*/
-int rcu_needs_cpu(int cpu)
+int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
{
+ *delta_jiffies = ULONG_MAX;
return rcu_cpu_has_callbacks(cpu);
}
@@ -1959,43 +1812,10 @@
*/
#define RCU_IDLE_FLUSHES 5 /* Number of dyntick-idle tries. */
#define RCU_IDLE_OPT_FLUSHES 3 /* Optional dyntick-idle tries. */
-#define RCU_IDLE_GP_DELAY 6 /* Roughly one grace period. */
+#define RCU_IDLE_GP_DELAY 4 /* Roughly one grace period. */
#define RCU_IDLE_LAZY_GP_DELAY (6 * HZ) /* Roughly six seconds. */
-/* Loop counter for rcu_prepare_for_idle(). */
-static DEFINE_PER_CPU(int, rcu_dyntick_drain);
-/* If rcu_dyntick_holdoff==jiffies, don't try to enter dyntick-idle mode. */
-static DEFINE_PER_CPU(unsigned long, rcu_dyntick_holdoff);
-/* Timer to awaken the CPU if it enters dyntick-idle mode with callbacks. */
-static DEFINE_PER_CPU(struct timer_list, rcu_idle_gp_timer);
-/* Scheduled expiry time for rcu_idle_gp_timer to allow reposting. */
-static DEFINE_PER_CPU(unsigned long, rcu_idle_gp_timer_expires);
-/* Enable special processing on first attempt to enter dyntick-idle mode. */
-static DEFINE_PER_CPU(bool, rcu_idle_first_pass);
-/* Running count of non-lazy callbacks posted, never decremented. */
-static DEFINE_PER_CPU(unsigned long, rcu_nonlazy_posted);
-/* Snapshot of rcu_nonlazy_posted to detect meaningful exits from idle. */
-static DEFINE_PER_CPU(unsigned long, rcu_nonlazy_posted_snap);
-
-/*
- * Allow the CPU to enter dyntick-idle mode if either: (1) There are no
- * callbacks on this CPU, (2) this CPU has not yet attempted to enter
- * dyntick-idle mode, or (3) this CPU is in the process of attempting to
- * enter dyntick-idle mode. Otherwise, if we have recently tried and failed
- * to enter dyntick-idle mode, we refuse to try to enter it. After all,
- * it is better to incur scheduling-clock interrupts than to spin
- * continuously for the same time duration!
- */
-int rcu_needs_cpu(int cpu)
-{
- /* Flag a new idle sojourn to the idle-entry state machine. */
- per_cpu(rcu_idle_first_pass, cpu) = 1;
- /* If no callbacks, RCU doesn't need the CPU. */
- if (!rcu_cpu_has_callbacks(cpu))
- return 0;
- /* Otherwise, RCU needs the CPU only if it recently tried and failed. */
- return per_cpu(rcu_dyntick_holdoff, cpu) == jiffies;
-}
+extern int tick_nohz_enabled;
/*
* Does the specified flavor of RCU have non-lazy callbacks pending on
@@ -2040,6 +1860,50 @@
}
/*
+ * Allow the CPU to enter dyntick-idle mode if either: (1) There are no
+ * callbacks on this CPU, (2) this CPU has not yet attempted to enter
+ * dyntick-idle mode, or (3) this CPU is in the process of attempting to
+ * enter dyntick-idle mode. Otherwise, if we have recently tried and failed
+ * to enter dyntick-idle mode, we refuse to try to enter it. After all,
+ * it is better to incur scheduling-clock interrupts than to spin
+ * continuously for the same time duration!
+ *
+ * The delta_jiffies argument is used to store the time when RCU is
+ * going to need the CPU again if it still has callbacks. The reason
+ * for this is that rcu_prepare_for_idle() might need to post a timer,
+ * but if so, it will do so after tick_nohz_stop_sched_tick() has set
+ * the wakeup time for this CPU. This means that RCU's timer can be
+ * delayed until the wakeup time, which defeats the purpose of posting
+ * a timer.
+ */
+int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
+{
+ struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+
+ /* Flag a new idle sojourn to the idle-entry state machine. */
+ rdtp->idle_first_pass = 1;
+ /* If no callbacks, RCU doesn't need the CPU. */
+ if (!rcu_cpu_has_callbacks(cpu)) {
+ *delta_jiffies = ULONG_MAX;
+ return 0;
+ }
+ if (rdtp->dyntick_holdoff == jiffies) {
+ /* RCU recently tried and failed, so don't try again. */
+ *delta_jiffies = 1;
+ return 1;
+ }
+ /* Set up for the possibility that RCU will post a timer. */
+ if (rcu_cpu_has_nonlazy_callbacks(cpu)) {
+ *delta_jiffies = round_up(RCU_IDLE_GP_DELAY + jiffies,
+ RCU_IDLE_GP_DELAY) - jiffies;
+ } else {
+ *delta_jiffies = jiffies + RCU_IDLE_LAZY_GP_DELAY;
+ *delta_jiffies = round_jiffies(*delta_jiffies) - jiffies;
+ }
+ return 0;
+}
+
+/*
* Handler for smp_call_function_single(). The only point of this
* handler is to wake the CPU up, so the handler does only tracing.
*/
@@ -2075,22 +1939,26 @@
*/
static void rcu_prepare_for_idle_init(int cpu)
{
- per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1;
- setup_timer(&per_cpu(rcu_idle_gp_timer, cpu),
- rcu_idle_gp_timer_func, cpu);
- per_cpu(rcu_idle_gp_timer_expires, cpu) = jiffies - 1;
- per_cpu(rcu_idle_first_pass, cpu) = 1;
+ struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+
+ rdtp->dyntick_holdoff = jiffies - 1;
+ setup_timer(&rdtp->idle_gp_timer, rcu_idle_gp_timer_func, cpu);
+ rdtp->idle_gp_timer_expires = jiffies - 1;
+ rdtp->idle_first_pass = 1;
}
/*
* Clean up for exit from idle. Because we are exiting from idle, there
- * is no longer any point to rcu_idle_gp_timer, so cancel it. This will
+ * is no longer any point to ->idle_gp_timer, so cancel it. This will
* do nothing if this timer is not active, so just cancel it unconditionally.
*/
static void rcu_cleanup_after_idle(int cpu)
{
- del_timer(&per_cpu(rcu_idle_gp_timer, cpu));
+ struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+
+ del_timer(&rdtp->idle_gp_timer);
trace_rcu_prep_idle("Cleanup after idle");
+ rdtp->tick_nohz_enabled_snap = ACCESS_ONCE(tick_nohz_enabled);
}
/*
@@ -2108,42 +1976,53 @@
* Because it is not legal to invoke rcu_process_callbacks() with irqs
* disabled, we do one pass of force_quiescent_state(), then do a
* invoke_rcu_core() to cause rcu_process_callbacks() to be invoked
- * later. The per-cpu rcu_dyntick_drain variable controls the sequencing.
+ * later. The ->dyntick_drain field controls the sequencing.
*
* The caller must have disabled interrupts.
*/
static void rcu_prepare_for_idle(int cpu)
{
struct timer_list *tp;
+ struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+ int tne;
+
+ /* Handle nohz enablement switches conservatively. */
+ tne = ACCESS_ONCE(tick_nohz_enabled);
+ if (tne != rdtp->tick_nohz_enabled_snap) {
+ if (rcu_cpu_has_callbacks(cpu))
+ invoke_rcu_core(); /* force nohz to see update. */
+ rdtp->tick_nohz_enabled_snap = tne;
+ return;
+ }
+ if (!tne)
+ return;
/*
* If this is an idle re-entry, for example, due to use of
* RCU_NONIDLE() or the new idle-loop tracing API within the idle
* loop, then don't take any state-machine actions, unless the
* momentary exit from idle queued additional non-lazy callbacks.
- * Instead, repost the rcu_idle_gp_timer if this CPU has callbacks
+ * Instead, repost the ->idle_gp_timer if this CPU has callbacks
* pending.
*/
- if (!per_cpu(rcu_idle_first_pass, cpu) &&
- (per_cpu(rcu_nonlazy_posted, cpu) ==
- per_cpu(rcu_nonlazy_posted_snap, cpu))) {
+ if (!rdtp->idle_first_pass &&
+ (rdtp->nonlazy_posted == rdtp->nonlazy_posted_snap)) {
if (rcu_cpu_has_callbacks(cpu)) {
- tp = &per_cpu(rcu_idle_gp_timer, cpu);
- mod_timer_pinned(tp, per_cpu(rcu_idle_gp_timer_expires, cpu));
+ tp = &rdtp->idle_gp_timer;
+ mod_timer_pinned(tp, rdtp->idle_gp_timer_expires);
}
return;
}
- per_cpu(rcu_idle_first_pass, cpu) = 0;
- per_cpu(rcu_nonlazy_posted_snap, cpu) =
- per_cpu(rcu_nonlazy_posted, cpu) - 1;
+ rdtp->idle_first_pass = 0;
+ rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted - 1;
/*
* If there are no callbacks on this CPU, enter dyntick-idle mode.
* Also reset state to avoid prejudicing later attempts.
*/
if (!rcu_cpu_has_callbacks(cpu)) {
- per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1;
- per_cpu(rcu_dyntick_drain, cpu) = 0;
+ rdtp->dyntick_holdoff = jiffies - 1;
+ rdtp->dyntick_drain = 0;
trace_rcu_prep_idle("No callbacks");
return;
}
@@ -2152,36 +2031,38 @@
* If in holdoff mode, just return. We will presumably have
* refrained from disabling the scheduling-clock tick.
*/
- if (per_cpu(rcu_dyntick_holdoff, cpu) == jiffies) {
+ if (rdtp->dyntick_holdoff == jiffies) {
trace_rcu_prep_idle("In holdoff");
return;
}
- /* Check and update the rcu_dyntick_drain sequencing. */
- if (per_cpu(rcu_dyntick_drain, cpu) <= 0) {
+ /* Check and update the ->dyntick_drain sequencing. */
+ if (rdtp->dyntick_drain <= 0) {
/* First time through, initialize the counter. */
- per_cpu(rcu_dyntick_drain, cpu) = RCU_IDLE_FLUSHES;
- } else if (per_cpu(rcu_dyntick_drain, cpu) <= RCU_IDLE_OPT_FLUSHES &&
+ rdtp->dyntick_drain = RCU_IDLE_FLUSHES;
+ } else if (rdtp->dyntick_drain <= RCU_IDLE_OPT_FLUSHES &&
!rcu_pending(cpu) &&
!local_softirq_pending()) {
/* Can we go dyntick-idle despite still having callbacks? */
- trace_rcu_prep_idle("Dyntick with callbacks");
- per_cpu(rcu_dyntick_drain, cpu) = 0;
- per_cpu(rcu_dyntick_holdoff, cpu) = jiffies;
- if (rcu_cpu_has_nonlazy_callbacks(cpu))
- per_cpu(rcu_idle_gp_timer_expires, cpu) =
- jiffies + RCU_IDLE_GP_DELAY;
- else
- per_cpu(rcu_idle_gp_timer_expires, cpu) =
- jiffies + RCU_IDLE_LAZY_GP_DELAY;
- tp = &per_cpu(rcu_idle_gp_timer, cpu);
- mod_timer_pinned(tp, per_cpu(rcu_idle_gp_timer_expires, cpu));
- per_cpu(rcu_nonlazy_posted_snap, cpu) =
- per_cpu(rcu_nonlazy_posted, cpu);
+ rdtp->dyntick_drain = 0;
+ rdtp->dyntick_holdoff = jiffies;
+ if (rcu_cpu_has_nonlazy_callbacks(cpu)) {
+ trace_rcu_prep_idle("Dyntick with callbacks");
+ rdtp->idle_gp_timer_expires =
+ round_up(jiffies + RCU_IDLE_GP_DELAY,
+ RCU_IDLE_GP_DELAY);
+ } else {
+ rdtp->idle_gp_timer_expires =
+ round_jiffies(jiffies + RCU_IDLE_LAZY_GP_DELAY);
+ trace_rcu_prep_idle("Dyntick with lazy callbacks");
+ }
+ tp = &rdtp->idle_gp_timer;
+ mod_timer_pinned(tp, rdtp->idle_gp_timer_expires);
+ rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted;
return; /* Nothing more to do immediately. */
- } else if (--per_cpu(rcu_dyntick_drain, cpu) <= 0) {
+ } else if (--(rdtp->dyntick_drain) <= 0) {
/* We have hit the limit, so time to give up. */
- per_cpu(rcu_dyntick_holdoff, cpu) = jiffies;
+ rdtp->dyntick_holdoff = jiffies;
trace_rcu_prep_idle("Begin holdoff");
invoke_rcu_core(); /* Force the CPU out of dyntick-idle. */
return;
@@ -2213,8 +2094,9 @@
if (rcu_cpu_has_callbacks(cpu)) {
trace_rcu_prep_idle("More callbacks");
invoke_rcu_core();
- } else
+ } else {
trace_rcu_prep_idle("Callbacks drained");
+ }
}
/*
@@ -2227,7 +2109,7 @@
*/
static void rcu_idle_count_callbacks_posted(void)
{
- __this_cpu_add(rcu_nonlazy_posted, 1);
+ __this_cpu_add(rcu_dynticks.nonlazy_posted, 1);
}
#endif /* #else #if !defined(CONFIG_RCU_FAST_NO_HZ) */
@@ -2238,11 +2120,12 @@
static void print_cpu_stall_fast_no_hz(char *cp, int cpu)
{
- struct timer_list *tltp = &per_cpu(rcu_idle_gp_timer, cpu);
+ struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+ struct timer_list *tltp = &rdtp->idle_gp_timer;
sprintf(cp, "drain=%d %c timer=%lu",
- per_cpu(rcu_dyntick_drain, cpu),
- per_cpu(rcu_dyntick_holdoff, cpu) == jiffies ? 'H' : '.',
+ rdtp->dyntick_drain,
+ rdtp->dyntick_holdoff == jiffies ? 'H' : '.',
timer_pending(tltp) ? tltp->expires - jiffies : -1);
}
@@ -2250,6 +2133,7 @@
static void print_cpu_stall_fast_no_hz(char *cp, int cpu)
{
+ *cp = '\0';
}
#endif /* #else #ifdef CONFIG_RCU_FAST_NO_HZ */
diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c
index d4bc16d..abffb48 100644
--- a/kernel/rcutree_trace.c
+++ b/kernel/rcutree_trace.c
@@ -46,6 +46,31 @@
#define RCU_TREE_NONCORE
#include "rcutree.h"
+static int show_rcubarrier(struct seq_file *m, void *unused)
+{
+ struct rcu_state *rsp;
+
+ for_each_rcu_flavor(rsp)
+ seq_printf(m, "%s: %c bcc: %d nbd: %lu\n",
+ rsp->name, rsp->rcu_barrier_in_progress ? 'B' : '.',
+ atomic_read(&rsp->barrier_cpu_count),
+ rsp->n_barrier_done);
+ return 0;
+}
+
+static int rcubarrier_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, show_rcubarrier, NULL);
+}
+
+static const struct file_operations rcubarrier_fops = {
+ .owner = THIS_MODULE,
+ .open = rcubarrier_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
#ifdef CONFIG_RCU_BOOST
static char convert_kthread_status(unsigned int kthread_status)
@@ -95,24 +120,16 @@
rdp->n_cbs_invoked, rdp->n_cbs_orphaned, rdp->n_cbs_adopted);
}
-#define PRINT_RCU_DATA(name, func, m) \
- do { \
- int _p_r_d_i; \
- \
- for_each_possible_cpu(_p_r_d_i) \
- func(m, &per_cpu(name, _p_r_d_i)); \
- } while (0)
-
static int show_rcudata(struct seq_file *m, void *unused)
{
-#ifdef CONFIG_TREE_PREEMPT_RCU
- seq_puts(m, "rcu_preempt:\n");
- PRINT_RCU_DATA(rcu_preempt_data, print_one_rcu_data, m);
-#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
- seq_puts(m, "rcu_sched:\n");
- PRINT_RCU_DATA(rcu_sched_data, print_one_rcu_data, m);
- seq_puts(m, "rcu_bh:\n");
- PRINT_RCU_DATA(rcu_bh_data, print_one_rcu_data, m);
+ int cpu;
+ struct rcu_state *rsp;
+
+ for_each_rcu_flavor(rsp) {
+ seq_printf(m, "%s:\n", rsp->name);
+ for_each_possible_cpu(cpu)
+ print_one_rcu_data(m, per_cpu_ptr(rsp->rda, cpu));
+ }
return 0;
}
@@ -166,6 +183,9 @@
static int show_rcudata_csv(struct seq_file *m, void *unused)
{
+ int cpu;
+ struct rcu_state *rsp;
+
seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pgp\",\"pq\",");
seq_puts(m, "\"dt\",\"dt nesting\",\"dt NMI nesting\",\"df\",");
seq_puts(m, "\"of\",\"qll\",\"ql\",\"qs\"");
@@ -173,14 +193,11 @@
seq_puts(m, "\"kt\",\"ktl\"");
#endif /* #ifdef CONFIG_RCU_BOOST */
seq_puts(m, ",\"b\",\"ci\",\"co\",\"ca\"\n");
-#ifdef CONFIG_TREE_PREEMPT_RCU
- seq_puts(m, "\"rcu_preempt:\"\n");
- PRINT_RCU_DATA(rcu_preempt_data, print_one_rcu_data_csv, m);
-#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
- seq_puts(m, "\"rcu_sched:\"\n");
- PRINT_RCU_DATA(rcu_sched_data, print_one_rcu_data_csv, m);
- seq_puts(m, "\"rcu_bh:\"\n");
- PRINT_RCU_DATA(rcu_bh_data, print_one_rcu_data_csv, m);
+ for_each_rcu_flavor(rsp) {
+ seq_printf(m, "\"%s:\"\n", rsp->name);
+ for_each_possible_cpu(cpu)
+ print_one_rcu_data_csv(m, per_cpu_ptr(rsp->rda, cpu));
+ }
return 0;
}
@@ -201,8 +218,7 @@
static void print_one_rcu_node_boost(struct seq_file *m, struct rcu_node *rnp)
{
- seq_printf(m, "%d:%d tasks=%c%c%c%c kt=%c ntb=%lu neb=%lu nnb=%lu "
- "j=%04x bt=%04x\n",
+ seq_printf(m, "%d:%d tasks=%c%c%c%c kt=%c ntb=%lu neb=%lu nnb=%lu ",
rnp->grplo, rnp->grphi,
"T."[list_empty(&rnp->blkd_tasks)],
"N."[!rnp->gp_tasks],
@@ -210,11 +226,11 @@
"B."[!rnp->boost_tasks],
convert_kthread_status(rnp->boost_kthread_status),
rnp->n_tasks_boosted, rnp->n_exp_boosts,
- rnp->n_normal_boosts,
+ rnp->n_normal_boosts);
+ seq_printf(m, "j=%04x bt=%04x\n",
(int)(jiffies & 0xffff),
(int)(rnp->boost_time & 0xffff));
- seq_printf(m, "%s: nt=%lu egt=%lu bt=%lu nb=%lu ny=%lu nos=%lu\n",
- " balk",
+ seq_printf(m, " balk: nt=%lu egt=%lu bt=%lu nb=%lu ny=%lu nos=%lu\n",
rnp->n_balk_blkd_tasks,
rnp->n_balk_exp_gp_tasks,
rnp->n_balk_boost_tasks,
@@ -270,15 +286,15 @@
struct rcu_node *rnp;
gpnum = rsp->gpnum;
- seq_printf(m, "c=%lu g=%lu s=%d jfq=%ld j=%x "
- "nfqs=%lu/nfqsng=%lu(%lu) fqlh=%lu oqlen=%ld/%ld\n",
- rsp->completed, gpnum, rsp->fqs_state,
+ seq_printf(m, "%s: c=%lu g=%lu s=%d jfq=%ld j=%x ",
+ rsp->name, rsp->completed, gpnum, rsp->fqs_state,
(long)(rsp->jiffies_force_qs - jiffies),
- (int)(jiffies & 0xffff),
+ (int)(jiffies & 0xffff));
+ seq_printf(m, "nfqs=%lu/nfqsng=%lu(%lu) fqlh=%lu oqlen=%ld/%ld\n",
rsp->n_force_qs, rsp->n_force_qs_ngp,
rsp->n_force_qs - rsp->n_force_qs_ngp,
rsp->n_force_qs_lh, rsp->qlen_lazy, rsp->qlen);
- for (rnp = &rsp->node[0]; rnp - &rsp->node[0] < NUM_RCU_NODES; rnp++) {
+ for (rnp = &rsp->node[0]; rnp - &rsp->node[0] < rcu_num_nodes; rnp++) {
if (rnp->level != level) {
seq_puts(m, "\n");
level = rnp->level;
@@ -295,14 +311,10 @@
static int show_rcuhier(struct seq_file *m, void *unused)
{
-#ifdef CONFIG_TREE_PREEMPT_RCU
- seq_puts(m, "rcu_preempt:\n");
- print_one_rcu_state(m, &rcu_preempt_state);
-#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
- seq_puts(m, "rcu_sched:\n");
- print_one_rcu_state(m, &rcu_sched_state);
- seq_puts(m, "rcu_bh:\n");
- print_one_rcu_state(m, &rcu_bh_state);
+ struct rcu_state *rsp;
+
+ for_each_rcu_flavor(rsp)
+ print_one_rcu_state(m, rsp);
return 0;
}
@@ -343,11 +355,10 @@
static int show_rcugp(struct seq_file *m, void *unused)
{
-#ifdef CONFIG_TREE_PREEMPT_RCU
- show_one_rcugp(m, &rcu_preempt_state);
-#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
- show_one_rcugp(m, &rcu_sched_state);
- show_one_rcugp(m, &rcu_bh_state);
+ struct rcu_state *rsp;
+
+ for_each_rcu_flavor(rsp)
+ show_one_rcugp(m, rsp);
return 0;
}
@@ -366,44 +377,36 @@
static void print_one_rcu_pending(struct seq_file *m, struct rcu_data *rdp)
{
- seq_printf(m, "%3d%cnp=%ld "
- "qsp=%ld rpq=%ld cbr=%ld cng=%ld "
- "gpc=%ld gps=%ld nf=%ld nn=%ld\n",
+ seq_printf(m, "%3d%cnp=%ld ",
rdp->cpu,
cpu_is_offline(rdp->cpu) ? '!' : ' ',
- rdp->n_rcu_pending,
+ rdp->n_rcu_pending);
+ seq_printf(m, "qsp=%ld rpq=%ld cbr=%ld cng=%ld ",
rdp->n_rp_qs_pending,
rdp->n_rp_report_qs,
rdp->n_rp_cb_ready,
- rdp->n_rp_cpu_needs_gp,
+ rdp->n_rp_cpu_needs_gp);
+ seq_printf(m, "gpc=%ld gps=%ld nf=%ld nn=%ld\n",
rdp->n_rp_gp_completed,
rdp->n_rp_gp_started,
rdp->n_rp_need_fqs,
rdp->n_rp_need_nothing);
}
-static void print_rcu_pendings(struct seq_file *m, struct rcu_state *rsp)
+static int show_rcu_pending(struct seq_file *m, void *unused)
{
int cpu;
struct rcu_data *rdp;
+ struct rcu_state *rsp;
- for_each_possible_cpu(cpu) {
- rdp = per_cpu_ptr(rsp->rda, cpu);
- if (rdp->beenonline)
- print_one_rcu_pending(m, rdp);
+ for_each_rcu_flavor(rsp) {
+ seq_printf(m, "%s:\n", rsp->name);
+ for_each_possible_cpu(cpu) {
+ rdp = per_cpu_ptr(rsp->rda, cpu);
+ if (rdp->beenonline)
+ print_one_rcu_pending(m, rdp);
+ }
}
-}
-
-static int show_rcu_pending(struct seq_file *m, void *unused)
-{
-#ifdef CONFIG_TREE_PREEMPT_RCU
- seq_puts(m, "rcu_preempt:\n");
- print_rcu_pendings(m, &rcu_preempt_state);
-#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
- seq_puts(m, "rcu_sched:\n");
- print_rcu_pendings(m, &rcu_sched_state);
- seq_puts(m, "rcu_bh:\n");
- print_rcu_pendings(m, &rcu_bh_state);
return 0;
}
@@ -453,6 +456,11 @@
if (!rcudir)
goto free_out;
+ retval = debugfs_create_file("rcubarrier", 0444, rcudir,
+ NULL, &rcubarrier_fops);
+ if (!retval)
+ goto free_out;
+
retval = debugfs_create_file("rcudata", 0444, rcudir,
NULL, &rcudata_fops);
if (!retval)
diff --git a/kernel/relay.c b/kernel/relay.c
index ab56a17..e8cd202 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -1235,6 +1235,7 @@
struct splice_pipe_desc spd = {
.pages = pages,
.nr_pages = 0,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.partial = partial,
.flags = flags,
.ops = &relay_pipe_buf_ops,
@@ -1302,8 +1303,8 @@
ret += padding;
out:
- splice_shrink_spd(pipe, &spd);
- return ret;
+ splice_shrink_spd(&spd);
+ return ret;
}
static ssize_t relay_file_splice_read(struct file *in,
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index d5594a4..468bdd4 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -2081,7 +2081,6 @@
#endif
/* Here we just switch the register state and the stack. */
- rcu_switch_from(prev);
switch_to(prev, next, prev);
barrier();
@@ -2161,11 +2160,73 @@
}
+/*
+ * Global load-average calculations
+ *
+ * We take a distributed and async approach to calculating the global load-avg
+ * in order to minimize overhead.
+ *
+ * The global load average is an exponentially decaying average of nr_running +
+ * nr_uninterruptible.
+ *
+ * Once every LOAD_FREQ:
+ *
+ * nr_active = 0;
+ * for_each_possible_cpu(cpu)
+ * nr_active += cpu_of(cpu)->nr_running + cpu_of(cpu)->nr_uninterruptible;
+ *
+ * avenrun[n] = avenrun[0] * exp_n + nr_active * (1 - exp_n)
+ *
+ * Due to a number of reasons the above turns in the mess below:
+ *
+ * - for_each_possible_cpu() is prohibitively expensive on machines with
+ * serious number of cpus, therefore we need to take a distributed approach
+ * to calculating nr_active.
+ *
+ * \Sum_i x_i(t) = \Sum_i x_i(t) - x_i(t_0) | x_i(t_0) := 0
+ * = \Sum_i { \Sum_j=1 x_i(t_j) - x_i(t_j-1) }
+ *
+ * So assuming nr_active := 0 when we start out -- true per definition, we
+ * can simply take per-cpu deltas and fold those into a global accumulate
+ * to obtain the same result. See calc_load_fold_active().
+ *
+ * Furthermore, in order to avoid synchronizing all per-cpu delta folding
+ * across the machine, we assume 10 ticks is sufficient time for every
+ * cpu to have completed this task.
+ *
+ * This places an upper-bound on the IRQ-off latency of the machine. Then
+ * again, being late doesn't loose the delta, just wrecks the sample.
+ *
+ * - cpu_rq()->nr_uninterruptible isn't accurately tracked per-cpu because
+ * this would add another cross-cpu cacheline miss and atomic operation
+ * to the wakeup path. Instead we increment on whatever cpu the task ran
+ * when it went into uninterruptible state and decrement on whatever cpu
+ * did the wakeup. This means that only the sum of nr_uninterruptible over
+ * all cpus yields the correct result.
+ *
+ * This covers the NO_HZ=n code, for extra head-aches, see the comment below.
+ */
+
/* Variables and functions for calc_load */
static atomic_long_t calc_load_tasks;
static unsigned long calc_load_update;
unsigned long avenrun[3];
-EXPORT_SYMBOL(avenrun);
+EXPORT_SYMBOL(avenrun); /* should be removed */
+
+/**
+ * get_avenrun - get the load average array
+ * @loads: pointer to dest load array
+ * @offset: offset to add
+ * @shift: shift count to shift the result left
+ *
+ * These values are estimates at best, so no need for locking.
+ */
+void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
+{
+ loads[0] = (avenrun[0] + offset) << shift;
+ loads[1] = (avenrun[1] + offset) << shift;
+ loads[2] = (avenrun[2] + offset) << shift;
+}
static long calc_load_fold_active(struct rq *this_rq)
{
@@ -2182,6 +2243,9 @@
return delta;
}
+/*
+ * a1 = a0 * e + a * (1 - e)
+ */
static unsigned long
calc_load(unsigned long load, unsigned long exp, unsigned long active)
{
@@ -2193,30 +2257,118 @@
#ifdef CONFIG_NO_HZ
/*
- * For NO_HZ we delay the active fold to the next LOAD_FREQ update.
+ * Handle NO_HZ for the global load-average.
+ *
+ * Since the above described distributed algorithm to compute the global
+ * load-average relies on per-cpu sampling from the tick, it is affected by
+ * NO_HZ.
+ *
+ * The basic idea is to fold the nr_active delta into a global idle-delta upon
+ * entering NO_HZ state such that we can include this as an 'extra' cpu delta
+ * when we read the global state.
+ *
+ * Obviously reality has to ruin such a delightfully simple scheme:
+ *
+ * - When we go NO_HZ idle during the window, we can negate our sample
+ * contribution, causing under-accounting.
+ *
+ * We avoid this by keeping two idle-delta counters and flipping them
+ * when the window starts, thus separating old and new NO_HZ load.
+ *
+ * The only trick is the slight shift in index flip for read vs write.
+ *
+ * 0s 5s 10s 15s
+ * +10 +10 +10 +10
+ * |-|-----------|-|-----------|-|-----------|-|
+ * r:0 0 1 1 0 0 1 1 0
+ * w:0 1 1 0 0 1 1 0 0
+ *
+ * This ensures we'll fold the old idle contribution in this window while
+ * accumlating the new one.
+ *
+ * - When we wake up from NO_HZ idle during the window, we push up our
+ * contribution, since we effectively move our sample point to a known
+ * busy state.
+ *
+ * This is solved by pushing the window forward, and thus skipping the
+ * sample, for this cpu (effectively using the idle-delta for this cpu which
+ * was in effect at the time the window opened). This also solves the issue
+ * of having to deal with a cpu having been in NOHZ idle for multiple
+ * LOAD_FREQ intervals.
*
* When making the ILB scale, we should try to pull this in as well.
*/
-static atomic_long_t calc_load_tasks_idle;
+static atomic_long_t calc_load_idle[2];
+static int calc_load_idx;
-void calc_load_account_idle(struct rq *this_rq)
+static inline int calc_load_write_idx(void)
{
+ int idx = calc_load_idx;
+
+ /*
+ * See calc_global_nohz(), if we observe the new index, we also
+ * need to observe the new update time.
+ */
+ smp_rmb();
+
+ /*
+ * If the folding window started, make sure we start writing in the
+ * next idle-delta.
+ */
+ if (!time_before(jiffies, calc_load_update))
+ idx++;
+
+ return idx & 1;
+}
+
+static inline int calc_load_read_idx(void)
+{
+ return calc_load_idx & 1;
+}
+
+void calc_load_enter_idle(void)
+{
+ struct rq *this_rq = this_rq();
long delta;
+ /*
+ * We're going into NOHZ mode, if there's any pending delta, fold it
+ * into the pending idle delta.
+ */
delta = calc_load_fold_active(this_rq);
- if (delta)
- atomic_long_add(delta, &calc_load_tasks_idle);
+ if (delta) {
+ int idx = calc_load_write_idx();
+ atomic_long_add(delta, &calc_load_idle[idx]);
+ }
+}
+
+void calc_load_exit_idle(void)
+{
+ struct rq *this_rq = this_rq();
+
+ /*
+ * If we're still before the sample window, we're done.
+ */
+ if (time_before(jiffies, this_rq->calc_load_update))
+ return;
+
+ /*
+ * We woke inside or after the sample window, this means we're already
+ * accounted through the nohz accounting, so skip the entire deal and
+ * sync up for the next window.
+ */
+ this_rq->calc_load_update = calc_load_update;
+ if (time_before(jiffies, this_rq->calc_load_update + 10))
+ this_rq->calc_load_update += LOAD_FREQ;
}
static long calc_load_fold_idle(void)
{
+ int idx = calc_load_read_idx();
long delta = 0;
- /*
- * Its got a race, we don't care...
- */
- if (atomic_long_read(&calc_load_tasks_idle))
- delta = atomic_long_xchg(&calc_load_tasks_idle, 0);
+ if (atomic_long_read(&calc_load_idle[idx]))
+ delta = atomic_long_xchg(&calc_load_idle[idx], 0);
return delta;
}
@@ -2302,66 +2454,39 @@
{
long delta, active, n;
- /*
- * If we crossed a calc_load_update boundary, make sure to fold
- * any pending idle changes, the respective CPUs might have
- * missed the tick driven calc_load_account_active() update
- * due to NO_HZ.
- */
- delta = calc_load_fold_idle();
- if (delta)
- atomic_long_add(delta, &calc_load_tasks);
+ if (!time_before(jiffies, calc_load_update + 10)) {
+ /*
+ * Catch-up, fold however many we are behind still
+ */
+ delta = jiffies - calc_load_update - 10;
+ n = 1 + (delta / LOAD_FREQ);
+
+ active = atomic_long_read(&calc_load_tasks);
+ active = active > 0 ? active * FIXED_1 : 0;
+
+ avenrun[0] = calc_load_n(avenrun[0], EXP_1, active, n);
+ avenrun[1] = calc_load_n(avenrun[1], EXP_5, active, n);
+ avenrun[2] = calc_load_n(avenrun[2], EXP_15, active, n);
+
+ calc_load_update += n * LOAD_FREQ;
+ }
/*
- * It could be the one fold was all it took, we done!
+ * Flip the idle index...
+ *
+ * Make sure we first write the new time then flip the index, so that
+ * calc_load_write_idx() will see the new time when it reads the new
+ * index, this avoids a double flip messing things up.
*/
- if (time_before(jiffies, calc_load_update + 10))
- return;
-
- /*
- * Catch-up, fold however many we are behind still
- */
- delta = jiffies - calc_load_update - 10;
- n = 1 + (delta / LOAD_FREQ);
-
- active = atomic_long_read(&calc_load_tasks);
- active = active > 0 ? active * FIXED_1 : 0;
-
- avenrun[0] = calc_load_n(avenrun[0], EXP_1, active, n);
- avenrun[1] = calc_load_n(avenrun[1], EXP_5, active, n);
- avenrun[2] = calc_load_n(avenrun[2], EXP_15, active, n);
-
- calc_load_update += n * LOAD_FREQ;
+ smp_wmb();
+ calc_load_idx++;
}
-#else
-void calc_load_account_idle(struct rq *this_rq)
-{
-}
+#else /* !CONFIG_NO_HZ */
-static inline long calc_load_fold_idle(void)
-{
- return 0;
-}
+static inline long calc_load_fold_idle(void) { return 0; }
+static inline void calc_global_nohz(void) { }
-static void calc_global_nohz(void)
-{
-}
-#endif
-
-/**
- * get_avenrun - get the load average array
- * @loads: pointer to dest load array
- * @offset: offset to add
- * @shift: shift count to shift the result left
- *
- * These values are estimates at best, so no need for locking.
- */
-void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
-{
- loads[0] = (avenrun[0] + offset) << shift;
- loads[1] = (avenrun[1] + offset) << shift;
- loads[2] = (avenrun[2] + offset) << shift;
-}
+#endif /* CONFIG_NO_HZ */
/*
* calc_load - update the avenrun load estimates 10 ticks after the
@@ -2369,11 +2494,18 @@
*/
void calc_global_load(unsigned long ticks)
{
- long active;
+ long active, delta;
if (time_before(jiffies, calc_load_update + 10))
return;
+ /*
+ * Fold the 'old' idle-delta to include all NO_HZ cpus.
+ */
+ delta = calc_load_fold_idle();
+ if (delta)
+ atomic_long_add(delta, &calc_load_tasks);
+
active = atomic_long_read(&calc_load_tasks);
active = active > 0 ? active * FIXED_1 : 0;
@@ -2384,12 +2516,7 @@
calc_load_update += LOAD_FREQ;
/*
- * Account one period with whatever state we found before
- * folding in the nohz state and ageing the entire idle period.
- *
- * This avoids loosing a sample when we go idle between
- * calc_load_account_active() (10 ticks ago) and now and thus
- * under-accounting.
+ * In case we idled for multiple LOAD_FREQ intervals, catch up in bulk.
*/
calc_global_nohz();
}
@@ -2406,7 +2533,6 @@
return;
delta = calc_load_fold_active(this_rq);
- delta += calc_load_fold_idle();
if (delta)
atomic_long_add(delta, &calc_load_tasks);
@@ -2414,6 +2540,10 @@
}
/*
+ * End of global load-average stuff
+ */
+
+/*
* The exact cpuload at various idx values, calculated at every tick would be
* load = (2^idx - 1) / 2^idx * load + 1 / 2^idx * cur_load
*
diff --git a/kernel/sched/idle_task.c b/kernel/sched/idle_task.c
index b44d604..b6baf37 100644
--- a/kernel/sched/idle_task.c
+++ b/kernel/sched/idle_task.c
@@ -25,7 +25,6 @@
static struct task_struct *pick_next_task_idle(struct rq *rq)
{
schedstat_inc(rq, sched_goidle);
- calc_load_account_idle(rq);
return rq->idle;
}
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 6d52cea..55844f2 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -942,8 +942,6 @@
return (u64)sysctl_sched_time_avg * NSEC_PER_MSEC / 2;
}
-void calc_load_account_idle(struct rq *this_rq);
-
#ifdef CONFIG_SCHED_HRTICK
/*
diff --git a/kernel/signal.c b/kernel/signal.c
index 6771027..be4f856 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1971,6 +1971,13 @@
void ptrace_notify(int exit_code)
{
BUG_ON((exit_code & (0x7f | ~0xffff)) != SIGTRAP);
+ if (unlikely(current->task_works)) {
+ if (test_and_clear_ti_thread_flag(current_thread_info(),
+ TIF_NOTIFY_RESUME)) {
+ smp_mb__after_clear_bit();
+ task_work_run();
+ }
+ }
spin_lock_irq(¤t->sighand->siglock);
ptrace_do_notify(SIGTRAP, exit_code, CLD_TRAPPED);
@@ -2191,6 +2198,14 @@
struct signal_struct *signal = current->signal;
int signr;
+ if (unlikely(current->task_works)) {
+ if (test_and_clear_ti_thread_flag(current_thread_info(),
+ TIF_NOTIFY_RESUME)) {
+ smp_mb__after_clear_bit();
+ task_work_run();
+ }
+ }
+
if (unlikely(uprobe_deny_signal()))
return 0;
diff --git a/kernel/smp.c b/kernel/smp.c
index d0ae5b2..29dd40a 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -581,26 +581,6 @@
return 0;
}
EXPORT_SYMBOL(smp_call_function);
-
-void ipi_call_lock(void)
-{
- raw_spin_lock(&call_function.lock);
-}
-
-void ipi_call_unlock(void)
-{
- raw_spin_unlock(&call_function.lock);
-}
-
-void ipi_call_lock_irq(void)
-{
- raw_spin_lock_irq(&call_function.lock);
-}
-
-void ipi_call_unlock_irq(void)
-{
- raw_spin_unlock_irq(&call_function.lock);
-}
#endif /* USE_GENERIC_SMP_HELPERS */
/* Setup configured maximum number of CPUs to activate */
diff --git a/kernel/smpboot.h b/kernel/smpboot.h
index 80c0acf..6ef9433 100644
--- a/kernel/smpboot.h
+++ b/kernel/smpboot.h
@@ -3,8 +3,6 @@
struct task_struct;
-int smpboot_prepare(unsigned int cpu);
-
#ifdef CONFIG_GENERIC_SMP_IDLE_THREAD
struct task_struct *idle_thread_get(unsigned int cpu);
void idle_thread_set_boot_cpu(void);
diff --git a/kernel/sys.c b/kernel/sys.c
index f0ec44d..2d39a84 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1788,7 +1788,6 @@
#ifdef CONFIG_CHECKPOINT_RESTORE
static int prctl_set_mm_exe_file(struct mm_struct *mm, unsigned int fd)
{
- struct vm_area_struct *vma;
struct file *exe_file;
struct dentry *dentry;
int err;
@@ -1816,13 +1815,17 @@
down_write(&mm->mmap_sem);
/*
- * Forbid mm->exe_file change if there are mapped other files.
+ * Forbid mm->exe_file change if old file still mapped.
*/
err = -EBUSY;
- for (vma = mm->mmap; vma; vma = vma->vm_next) {
- if (vma->vm_file && !path_equal(&vma->vm_file->f_path,
- &exe_file->f_path))
- goto exit_unlock;
+ if (mm->exe_file) {
+ struct vm_area_struct *vma;
+
+ for (vma = mm->mmap; vma; vma = vma->vm_next)
+ if (vma->vm_file &&
+ path_equal(&vma->vm_file->f_path,
+ &mm->exe_file->f_path))
+ goto exit_unlock;
}
/*
@@ -1835,6 +1838,7 @@
if (test_and_set_bit(MMF_EXE_FILE_CHANGED, &mm->flags))
goto exit_unlock;
+ err = 0;
set_mm_exe_file(mm, exe_file);
exit_unlock:
up_write(&mm->mmap_sem);
@@ -2127,9 +2131,6 @@
else
return -EINVAL;
break;
- case PR_GET_TID_ADDRESS:
- error = prctl_get_tid_address(me, (int __user **)arg2);
- break;
default:
return -EINVAL;
}
@@ -2147,6 +2148,9 @@
case PR_SET_MM:
error = prctl_set_mm(arg2, arg3, arg4, arg5);
break;
+ case PR_GET_TID_ADDRESS:
+ error = prctl_get_tid_address(me, (int __user **)arg2);
+ break;
case PR_SET_CHILD_SUBREAPER:
me->signal->is_child_subreaper = !!arg2;
error = 0;
diff --git a/kernel/task_work.c b/kernel/task_work.c
index 82d1c79..91d4e17 100644
--- a/kernel/task_work.c
+++ b/kernel/task_work.c
@@ -3,82 +3,78 @@
#include <linux/tracehook.h>
int
-task_work_add(struct task_struct *task, struct task_work *twork, bool notify)
+task_work_add(struct task_struct *task, struct callback_head *twork, bool notify)
{
+ struct callback_head *last, *first;
unsigned long flags;
- int err = -ESRCH;
-#ifndef TIF_NOTIFY_RESUME
- if (notify)
- return -ENOTSUPP;
-#endif
/*
- * We must not insert the new work if the task has already passed
- * exit_task_work(). We rely on do_exit()->raw_spin_unlock_wait()
- * and check PF_EXITING under pi_lock.
+ * Not inserting the new work if the task has already passed
+ * exit_task_work() is the responisbility of callers.
*/
raw_spin_lock_irqsave(&task->pi_lock, flags);
- if (likely(!(task->flags & PF_EXITING))) {
- hlist_add_head(&twork->hlist, &task->task_works);
- err = 0;
- }
+ last = task->task_works;
+ first = last ? last->next : twork;
+ twork->next = first;
+ if (last)
+ last->next = twork;
+ task->task_works = twork;
raw_spin_unlock_irqrestore(&task->pi_lock, flags);
/* test_and_set_bit() implies mb(), see tracehook_notify_resume(). */
- if (likely(!err) && notify)
+ if (notify)
set_notify_resume(task);
- return err;
+ return 0;
}
-struct task_work *
+struct callback_head *
task_work_cancel(struct task_struct *task, task_work_func_t func)
{
unsigned long flags;
- struct task_work *twork;
- struct hlist_node *pos;
+ struct callback_head *last, *res = NULL;
raw_spin_lock_irqsave(&task->pi_lock, flags);
- hlist_for_each_entry(twork, pos, &task->task_works, hlist) {
- if (twork->func == func) {
- hlist_del(&twork->hlist);
- goto found;
+ last = task->task_works;
+ if (last) {
+ struct callback_head *q = last, *p = q->next;
+ while (1) {
+ if (p->func == func) {
+ q->next = p->next;
+ if (p == last)
+ task->task_works = q == p ? NULL : q;
+ res = p;
+ break;
+ }
+ if (p == last)
+ break;
+ q = p;
+ p = q->next;
}
}
- twork = NULL;
- found:
raw_spin_unlock_irqrestore(&task->pi_lock, flags);
-
- return twork;
+ return res;
}
void task_work_run(void)
{
struct task_struct *task = current;
- struct hlist_head task_works;
- struct hlist_node *pos;
+ struct callback_head *p, *q;
- raw_spin_lock_irq(&task->pi_lock);
- hlist_move_list(&task->task_works, &task_works);
- raw_spin_unlock_irq(&task->pi_lock);
+ while (1) {
+ raw_spin_lock_irq(&task->pi_lock);
+ p = task->task_works;
+ task->task_works = NULL;
+ raw_spin_unlock_irq(&task->pi_lock);
- if (unlikely(hlist_empty(&task_works)))
- return;
- /*
- * We use hlist to save the space in task_struct, but we want fifo.
- * Find the last entry, the list should be short, then process them
- * in reverse order.
- */
- for (pos = task_works.first; pos->next; pos = pos->next)
- ;
+ if (unlikely(!p))
+ return;
- for (;;) {
- struct hlist_node **pprev = pos->pprev;
- struct task_work *twork = container_of(pos, struct task_work,
- hlist);
- twork->func(twork);
-
- if (pprev == &task_works.first)
- break;
- pos = container_of(pprev, struct hlist_node, next);
+ q = p->next; /* head */
+ p->next = NULL; /* cut it */
+ while (q) {
+ p = q->next;
+ q->func(q);
+ q = p;
+ }
}
}
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 70b33ab..b7fbadc 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -409,7 +409,9 @@
time_state = TIME_DEL;
break;
case TIME_INS:
- if (secs % 86400 == 0) {
+ if (!(time_status & STA_INS))
+ time_state = TIME_OK;
+ else if (secs % 86400 == 0) {
leap = -1;
time_state = TIME_OOP;
time_tai++;
@@ -418,7 +420,9 @@
}
break;
case TIME_DEL:
- if ((secs + 1) % 86400 == 0) {
+ if (!(time_status & STA_DEL))
+ time_state = TIME_OK;
+ else if ((secs + 1) % 86400 == 0) {
leap = 1;
time_tai--;
time_state = TIME_WAIT;
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index da70c6d..024540f 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -105,7 +105,7 @@
/*
* NO HZ enabled ?
*/
-static int tick_nohz_enabled __read_mostly = 1;
+int tick_nohz_enabled __read_mostly = 1;
/*
* Enable / Disable tickless mode
@@ -271,49 +271,15 @@
}
EXPORT_SYMBOL_GPL(get_cpu_iowait_time_us);
-static void tick_nohz_stop_sched_tick(struct tick_sched *ts)
+static ktime_t tick_nohz_stop_sched_tick(struct tick_sched *ts,
+ ktime_t now, int cpu)
{
unsigned long seq, last_jiffies, next_jiffies, delta_jiffies;
- ktime_t last_update, expires, now;
+ ktime_t last_update, expires, ret = { .tv64 = 0 };
+ unsigned long rcu_delta_jiffies;
struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
u64 time_delta;
- int cpu;
- cpu = smp_processor_id();
- ts = &per_cpu(tick_cpu_sched, cpu);
-
- now = tick_nohz_start_idle(cpu, ts);
-
- /*
- * If this cpu is offline and it is the one which updates
- * jiffies, then give up the assignment and let it be taken by
- * the cpu which runs the tick timer next. If we don't drop
- * this here the jiffies might be stale and do_timer() never
- * invoked.
- */
- if (unlikely(!cpu_online(cpu))) {
- if (cpu == tick_do_timer_cpu)
- tick_do_timer_cpu = TICK_DO_TIMER_NONE;
- }
-
- if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE))
- return;
-
- if (need_resched())
- return;
-
- if (unlikely(local_softirq_pending() && cpu_online(cpu))) {
- static int ratelimit;
-
- if (ratelimit < 10) {
- printk(KERN_ERR "NOHZ: local_softirq_pending %02x\n",
- (unsigned int) local_softirq_pending());
- ratelimit++;
- }
- return;
- }
-
- ts->idle_calls++;
/* Read jiffies and the time when jiffies were updated last */
do {
seq = read_seqbegin(&xtime_lock);
@@ -322,7 +288,7 @@
time_delta = timekeeping_max_deferment();
} while (read_seqretry(&xtime_lock, seq));
- if (rcu_needs_cpu(cpu) || printk_needs_cpu(cpu) ||
+ if (rcu_needs_cpu(cpu, &rcu_delta_jiffies) || printk_needs_cpu(cpu) ||
arch_needs_cpu(cpu)) {
next_jiffies = last_jiffies + 1;
delta_jiffies = 1;
@@ -330,6 +296,10 @@
/* Get the next timer wheel timer */
next_jiffies = get_next_timer_interrupt(last_jiffies);
delta_jiffies = next_jiffies - last_jiffies;
+ if (rcu_delta_jiffies < delta_jiffies) {
+ next_jiffies = last_jiffies + rcu_delta_jiffies;
+ delta_jiffies = rcu_delta_jiffies;
+ }
}
/*
* Do not stop the tick, if we are only one off
@@ -392,6 +362,8 @@
if (ts->tick_stopped && ktime_equal(expires, dev->next_event))
goto out;
+ ret = expires;
+
/*
* nohz_stop_sched_tick can be called several times before
* the nohz_restart_sched_tick is called. This happens when
@@ -401,17 +373,12 @@
*/
if (!ts->tick_stopped) {
select_nohz_load_balancer(1);
+ calc_load_enter_idle();
- ts->idle_tick = hrtimer_get_expires(&ts->sched_timer);
+ ts->last_tick = hrtimer_get_expires(&ts->sched_timer);
ts->tick_stopped = 1;
- ts->idle_jiffies = last_jiffies;
}
- ts->idle_sleeps++;
-
- /* Mark expires */
- ts->idle_expires = expires;
-
/*
* If the expiration time == KTIME_MAX, then
* in this case we simply stop the tick timer.
@@ -442,6 +409,65 @@
ts->next_jiffies = next_jiffies;
ts->last_jiffies = last_jiffies;
ts->sleep_length = ktime_sub(dev->next_event, now);
+
+ return ret;
+}
+
+static bool can_stop_idle_tick(int cpu, struct tick_sched *ts)
+{
+ /*
+ * If this cpu is offline and it is the one which updates
+ * jiffies, then give up the assignment and let it be taken by
+ * the cpu which runs the tick timer next. If we don't drop
+ * this here the jiffies might be stale and do_timer() never
+ * invoked.
+ */
+ if (unlikely(!cpu_online(cpu))) {
+ if (cpu == tick_do_timer_cpu)
+ tick_do_timer_cpu = TICK_DO_TIMER_NONE;
+ }
+
+ if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE))
+ return false;
+
+ if (need_resched())
+ return false;
+
+ if (unlikely(local_softirq_pending() && cpu_online(cpu))) {
+ static int ratelimit;
+
+ if (ratelimit < 10) {
+ printk(KERN_ERR "NOHZ: local_softirq_pending %02x\n",
+ (unsigned int) local_softirq_pending());
+ ratelimit++;
+ }
+ return false;
+ }
+
+ return true;
+}
+
+static void __tick_nohz_idle_enter(struct tick_sched *ts)
+{
+ ktime_t now, expires;
+ int cpu = smp_processor_id();
+
+ now = tick_nohz_start_idle(cpu, ts);
+
+ if (can_stop_idle_tick(cpu, ts)) {
+ int was_stopped = ts->tick_stopped;
+
+ ts->idle_calls++;
+
+ expires = tick_nohz_stop_sched_tick(ts, now, cpu);
+ if (expires.tv64 > 0LL) {
+ ts->idle_sleeps++;
+ ts->idle_expires = expires;
+ }
+
+ if (!was_stopped && ts->tick_stopped)
+ ts->idle_jiffies = ts->last_jiffies;
+ }
}
/**
@@ -479,7 +505,7 @@
* update of the idle time accounting in tick_nohz_start_idle().
*/
ts->inidle = 1;
- tick_nohz_stop_sched_tick(ts);
+ __tick_nohz_idle_enter(ts);
local_irq_enable();
}
@@ -499,7 +525,7 @@
if (!ts->inidle)
return;
- tick_nohz_stop_sched_tick(ts);
+ __tick_nohz_idle_enter(ts);
}
/**
@@ -517,7 +543,7 @@
static void tick_nohz_restart(struct tick_sched *ts, ktime_t now)
{
hrtimer_cancel(&ts->sched_timer);
- hrtimer_set_expires(&ts->sched_timer, ts->idle_tick);
+ hrtimer_set_expires(&ts->sched_timer, ts->last_tick);
while (1) {
/* Forward the time to expire in the future */
@@ -540,6 +566,41 @@
}
}
+static void tick_nohz_restart_sched_tick(struct tick_sched *ts, ktime_t now)
+{
+ /* Update jiffies first */
+ select_nohz_load_balancer(0);
+ tick_do_update_jiffies64(now);
+ update_cpu_load_nohz();
+
+ touch_softlockup_watchdog();
+ /*
+ * Cancel the scheduled timer and restore the tick
+ */
+ ts->tick_stopped = 0;
+ ts->idle_exittime = now;
+
+ tick_nohz_restart(ts, now);
+}
+
+static void tick_nohz_account_idle_ticks(struct tick_sched *ts)
+{
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+ unsigned long ticks;
+ /*
+ * We stopped the tick in idle. Update process times would miss the
+ * time we slept as update_process_times does only a 1 tick
+ * accounting. Enforce that this is accounted to idle !
+ */
+ ticks = jiffies - ts->idle_jiffies;
+ /*
+ * We might be one off. Do not randomly account a huge number of ticks!
+ */
+ if (ticks && ticks < LONG_MAX)
+ account_idle_ticks(ticks);
+#endif
+}
+
/**
* tick_nohz_idle_exit - restart the idle tick from the idle task
*
@@ -551,9 +612,6 @@
{
int cpu = smp_processor_id();
struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
- unsigned long ticks;
-#endif
ktime_t now;
local_irq_disable();
@@ -568,39 +626,11 @@
if (ts->idle_active)
tick_nohz_stop_idle(cpu, now);
- if (!ts->tick_stopped) {
- local_irq_enable();
- return;
+ if (ts->tick_stopped) {
+ tick_nohz_restart_sched_tick(ts, now);
+ tick_nohz_account_idle_ticks(ts);
}
- /* Update jiffies first */
- select_nohz_load_balancer(0);
- tick_do_update_jiffies64(now);
- update_cpu_load_nohz();
-
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
- /*
- * We stopped the tick in idle. Update process times would miss the
- * time we slept as update_process_times does only a 1 tick
- * accounting. Enforce that this is accounted to idle !
- */
- ticks = jiffies - ts->idle_jiffies;
- /*
- * We might be one off. Do not randomly account a huge number of ticks!
- */
- if (ticks && ticks < LONG_MAX)
- account_idle_ticks(ticks);
-#endif
-
- touch_softlockup_watchdog();
- /*
- * Cancel the scheduled timer and restore the tick
- */
- ts->tick_stopped = 0;
- ts->idle_exittime = now;
-
- tick_nohz_restart(ts, now);
-
local_irq_enable();
}
@@ -804,7 +834,8 @@
*/
if (ts->tick_stopped) {
touch_softlockup_watchdog();
- ts->idle_jiffies++;
+ if (idle_cpu(cpu))
+ ts->idle_jiffies++;
}
update_process_times(user_mode(regs));
profile_tick(CPU_PROFILING);
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 6f46a00..f045cc5 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -24,32 +24,32 @@
/* Structure holding internal timekeeping values. */
struct timekeeper {
/* Current clocksource used for timekeeping. */
- struct clocksource *clock;
+ struct clocksource *clock;
/* NTP adjusted clock multiplier */
- u32 mult;
+ u32 mult;
/* The shift value of the current clocksource. */
- int shift;
-
+ u32 shift;
/* Number of clock cycles in one NTP interval. */
- cycle_t cycle_interval;
+ cycle_t cycle_interval;
/* Number of clock shifted nano seconds in one NTP interval. */
- u64 xtime_interval;
+ u64 xtime_interval;
/* shifted nano seconds left over when rounding cycle_interval */
- s64 xtime_remainder;
+ s64 xtime_remainder;
/* Raw nano seconds accumulated per NTP interval. */
- u32 raw_interval;
+ u32 raw_interval;
- /* Clock shifted nano seconds remainder not stored in xtime.tv_nsec. */
- u64 xtime_nsec;
+ /* Current CLOCK_REALTIME time in seconds */
+ u64 xtime_sec;
+ /* Clock shifted nano seconds */
+ u64 xtime_nsec;
+
/* Difference between accumulated time and NTP time in ntp
* shifted nano seconds. */
- s64 ntp_error;
+ s64 ntp_error;
/* Shift conversion between clock shifted nano seconds and
* ntp shifted nano seconds. */
- int ntp_error_shift;
+ u32 ntp_error_shift;
- /* The current time */
- struct timespec xtime;
/*
* wall_to_monotonic is what we need to add to xtime (or xtime corrected
* for sub jiffie times) to get to monotonic time. Monotonic is pegged
@@ -64,14 +64,17 @@
* - wall_to_monotonic is no longer the boot time, getboottime must be
* used instead.
*/
- struct timespec wall_to_monotonic;
+ struct timespec wall_to_monotonic;
/* time spent in suspend */
- struct timespec total_sleep_time;
+ struct timespec total_sleep_time;
/* The raw monotonic time for the CLOCK_MONOTONIC_RAW posix clock. */
- struct timespec raw_time;
-
+ struct timespec raw_time;
+ /* Offset clock monotonic -> clock realtime */
+ ktime_t offs_real;
+ /* Offset clock monotonic -> clock boottime */
+ ktime_t offs_boot;
/* Seqlock for all timekeeper values */
- seqlock_t lock;
+ seqlock_t lock;
};
static struct timekeeper timekeeper;
@@ -82,11 +85,37 @@
*/
__cacheline_aligned_in_smp DEFINE_SEQLOCK(xtime_lock);
-
/* flag for if timekeeping is suspended */
int __read_mostly timekeeping_suspended;
+static inline void tk_normalize_xtime(struct timekeeper *tk)
+{
+ while (tk->xtime_nsec >= ((u64)NSEC_PER_SEC << tk->shift)) {
+ tk->xtime_nsec -= (u64)NSEC_PER_SEC << tk->shift;
+ tk->xtime_sec++;
+ }
+}
+static struct timespec tk_xtime(struct timekeeper *tk)
+{
+ struct timespec ts;
+
+ ts.tv_sec = tk->xtime_sec;
+ ts.tv_nsec = (long)(tk->xtime_nsec >> tk->shift);
+ return ts;
+}
+
+static void tk_set_xtime(struct timekeeper *tk, const struct timespec *ts)
+{
+ tk->xtime_sec = ts->tv_sec;
+ tk->xtime_nsec = ts->tv_nsec << tk->shift;
+}
+
+static void tk_xtime_add(struct timekeeper *tk, const struct timespec *ts)
+{
+ tk->xtime_sec += ts->tv_sec;
+ tk->xtime_nsec += ts->tv_nsec << tk->shift;
+}
/**
* timekeeper_setup_internals - Set up internals to use clocksource clock.
@@ -98,12 +127,14 @@
*
* Unless you're the timekeeping code, you should not be using this!
*/
-static void timekeeper_setup_internals(struct clocksource *clock)
+static void tk_setup_internals(struct timekeeper *tk, struct clocksource *clock)
{
cycle_t interval;
u64 tmp, ntpinterval;
+ struct clocksource *old_clock;
- timekeeper.clock = clock;
+ old_clock = tk->clock;
+ tk->clock = clock;
clock->cycle_last = clock->read(clock);
/* Do the ns -> cycle conversion first, using original mult */
@@ -116,71 +147,96 @@
tmp = 1;
interval = (cycle_t) tmp;
- timekeeper.cycle_interval = interval;
+ tk->cycle_interval = interval;
/* Go back from cycles -> shifted ns */
- timekeeper.xtime_interval = (u64) interval * clock->mult;
- timekeeper.xtime_remainder = ntpinterval - timekeeper.xtime_interval;
- timekeeper.raw_interval =
+ tk->xtime_interval = (u64) interval * clock->mult;
+ tk->xtime_remainder = ntpinterval - tk->xtime_interval;
+ tk->raw_interval =
((u64) interval * clock->mult) >> clock->shift;
- timekeeper.xtime_nsec = 0;
- timekeeper.shift = clock->shift;
+ /* if changing clocks, convert xtime_nsec shift units */
+ if (old_clock) {
+ int shift_change = clock->shift - old_clock->shift;
+ if (shift_change < 0)
+ tk->xtime_nsec >>= -shift_change;
+ else
+ tk->xtime_nsec <<= shift_change;
+ }
+ tk->shift = clock->shift;
- timekeeper.ntp_error = 0;
- timekeeper.ntp_error_shift = NTP_SCALE_SHIFT - clock->shift;
+ tk->ntp_error = 0;
+ tk->ntp_error_shift = NTP_SCALE_SHIFT - clock->shift;
/*
* The timekeeper keeps its own mult values for the currently
* active clocksource. These value will be adjusted via NTP
* to counteract clock drifting.
*/
- timekeeper.mult = clock->mult;
+ tk->mult = clock->mult;
}
/* Timekeeper helper functions. */
-static inline s64 timekeeping_get_ns(void)
+static inline s64 timekeeping_get_ns(struct timekeeper *tk)
{
cycle_t cycle_now, cycle_delta;
struct clocksource *clock;
+ s64 nsec;
/* read clocksource: */
- clock = timekeeper.clock;
+ clock = tk->clock;
cycle_now = clock->read(clock);
/* calculate the delta since the last update_wall_time: */
cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
- /* return delta convert to nanoseconds using ntp adjusted mult. */
- return clocksource_cyc2ns(cycle_delta, timekeeper.mult,
- timekeeper.shift);
+ nsec = cycle_delta * tk->mult + tk->xtime_nsec;
+ nsec >>= tk->shift;
+
+ /* If arch requires, add in gettimeoffset() */
+ return nsec + arch_gettimeoffset();
}
-static inline s64 timekeeping_get_ns_raw(void)
+static inline s64 timekeeping_get_ns_raw(struct timekeeper *tk)
{
cycle_t cycle_now, cycle_delta;
struct clocksource *clock;
+ s64 nsec;
/* read clocksource: */
- clock = timekeeper.clock;
+ clock = tk->clock;
cycle_now = clock->read(clock);
/* calculate the delta since the last update_wall_time: */
cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
- /* return delta convert to nanoseconds. */
- return clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);
+ /* convert delta to nanoseconds. */
+ nsec = clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);
+
+ /* If arch requires, add in gettimeoffset() */
+ return nsec + arch_gettimeoffset();
+}
+
+static void update_rt_offset(struct timekeeper *tk)
+{
+ struct timespec tmp, *wtm = &tk->wall_to_monotonic;
+
+ set_normalized_timespec(&tmp, -wtm->tv_sec, -wtm->tv_nsec);
+ tk->offs_real = timespec_to_ktime(tmp);
}
/* must hold write on timekeeper.lock */
-static void timekeeping_update(bool clearntp)
+static void timekeeping_update(struct timekeeper *tk, bool clearntp)
{
+ struct timespec xt;
+
if (clearntp) {
- timekeeper.ntp_error = 0;
+ tk->ntp_error = 0;
ntp_clear();
}
- update_vsyscall(&timekeeper.xtime, &timekeeper.wall_to_monotonic,
- timekeeper.clock, timekeeper.mult);
+ update_rt_offset(tk);
+ xt = tk_xtime(tk);
+ update_vsyscall(&xt, &tk->wall_to_monotonic, tk->clock, tk->mult);
}
@@ -191,27 +247,26 @@
* update_wall_time(). This is useful before significant clock changes,
* as it avoids having to deal with this time offset explicitly.
*/
-static void timekeeping_forward_now(void)
+static void timekeeping_forward_now(struct timekeeper *tk)
{
cycle_t cycle_now, cycle_delta;
struct clocksource *clock;
s64 nsec;
- clock = timekeeper.clock;
+ clock = tk->clock;
cycle_now = clock->read(clock);
cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
clock->cycle_last = cycle_now;
- nsec = clocksource_cyc2ns(cycle_delta, timekeeper.mult,
- timekeeper.shift);
+ tk->xtime_nsec += cycle_delta * tk->mult;
/* If arch requires, add in gettimeoffset() */
- nsec += arch_gettimeoffset();
+ tk->xtime_nsec += arch_gettimeoffset() << tk->shift;
- timespec_add_ns(&timekeeper.xtime, nsec);
+ tk_normalize_xtime(tk);
nsec = clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);
- timespec_add_ns(&timekeeper.raw_time, nsec);
+ timespec_add_ns(&tk->raw_time, nsec);
}
/**
@@ -223,18 +278,15 @@
void getnstimeofday(struct timespec *ts)
{
unsigned long seq;
- s64 nsecs;
+ s64 nsecs = 0;
WARN_ON(timekeeping_suspended);
do {
seq = read_seqbegin(&timekeeper.lock);
- *ts = timekeeper.xtime;
- nsecs = timekeeping_get_ns();
-
- /* If arch requires, add in gettimeoffset() */
- nsecs += arch_gettimeoffset();
+ ts->tv_sec = timekeeper.xtime_sec;
+ ts->tv_nsec = timekeeping_get_ns(&timekeeper);
} while (read_seqretry(&timekeeper.lock, seq));
@@ -251,13 +303,10 @@
do {
seq = read_seqbegin(&timekeeper.lock);
- secs = timekeeper.xtime.tv_sec +
+ secs = timekeeper.xtime_sec +
timekeeper.wall_to_monotonic.tv_sec;
- nsecs = timekeeper.xtime.tv_nsec +
+ nsecs = timekeeping_get_ns(&timekeeper) +
timekeeper.wall_to_monotonic.tv_nsec;
- nsecs += timekeeping_get_ns();
- /* If arch requires, add in gettimeoffset() */
- nsecs += arch_gettimeoffset();
} while (read_seqretry(&timekeeper.lock, seq));
/*
@@ -280,22 +329,19 @@
{
struct timespec tomono;
unsigned int seq;
- s64 nsecs;
WARN_ON(timekeeping_suspended);
do {
seq = read_seqbegin(&timekeeper.lock);
- *ts = timekeeper.xtime;
+ ts->tv_sec = timekeeper.xtime_sec;
+ ts->tv_nsec = timekeeping_get_ns(&timekeeper);
tomono = timekeeper.wall_to_monotonic;
- nsecs = timekeeping_get_ns();
- /* If arch requires, add in gettimeoffset() */
- nsecs += arch_gettimeoffset();
} while (read_seqretry(&timekeeper.lock, seq));
set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec,
- ts->tv_nsec + tomono.tv_nsec + nsecs);
+ ts->tv_nsec + tomono.tv_nsec);
}
EXPORT_SYMBOL_GPL(ktime_get_ts);
@@ -318,20 +364,14 @@
WARN_ON_ONCE(timekeeping_suspended);
do {
- u32 arch_offset;
-
seq = read_seqbegin(&timekeeper.lock);
*ts_raw = timekeeper.raw_time;
- *ts_real = timekeeper.xtime;
+ ts_real->tv_sec = timekeeper.xtime_sec;
+ ts_real->tv_nsec = 0;
- nsecs_raw = timekeeping_get_ns_raw();
- nsecs_real = timekeeping_get_ns();
-
- /* If arch requires, add in gettimeoffset() */
- arch_offset = arch_gettimeoffset();
- nsecs_raw += arch_offset;
- nsecs_real += arch_offset;
+ nsecs_raw = timekeeping_get_ns_raw(&timekeeper);
+ nsecs_real = timekeeping_get_ns(&timekeeper);
} while (read_seqretry(&timekeeper.lock, seq));
@@ -366,7 +406,7 @@
*/
int do_settimeofday(const struct timespec *tv)
{
- struct timespec ts_delta;
+ struct timespec ts_delta, xt;
unsigned long flags;
if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
@@ -374,15 +414,18 @@
write_seqlock_irqsave(&timekeeper.lock, flags);
- timekeeping_forward_now();
+ timekeeping_forward_now(&timekeeper);
- ts_delta.tv_sec = tv->tv_sec - timekeeper.xtime.tv_sec;
- ts_delta.tv_nsec = tv->tv_nsec - timekeeper.xtime.tv_nsec;
+ xt = tk_xtime(&timekeeper);
+ ts_delta.tv_sec = tv->tv_sec - xt.tv_sec;
+ ts_delta.tv_nsec = tv->tv_nsec - xt.tv_nsec;
+
timekeeper.wall_to_monotonic =
timespec_sub(timekeeper.wall_to_monotonic, ts_delta);
- timekeeper.xtime = *tv;
- timekeeping_update(true);
+ tk_set_xtime(&timekeeper, tv);
+
+ timekeeping_update(&timekeeper, true);
write_sequnlock_irqrestore(&timekeeper.lock, flags);
@@ -409,13 +452,14 @@
write_seqlock_irqsave(&timekeeper.lock, flags);
- timekeeping_forward_now();
+ timekeeping_forward_now(&timekeeper);
- timekeeper.xtime = timespec_add(timekeeper.xtime, *ts);
+
+ tk_xtime_add(&timekeeper, ts);
timekeeper.wall_to_monotonic =
timespec_sub(timekeeper.wall_to_monotonic, *ts);
- timekeeping_update(true);
+ timekeeping_update(&timekeeper, true);
write_sequnlock_irqrestore(&timekeeper.lock, flags);
@@ -440,14 +484,14 @@
write_seqlock_irqsave(&timekeeper.lock, flags);
- timekeeping_forward_now();
+ timekeeping_forward_now(&timekeeper);
if (!new->enable || new->enable(new) == 0) {
old = timekeeper.clock;
- timekeeper_setup_internals(new);
+ tk_setup_internals(&timekeeper, new);
if (old->disable)
old->disable(old);
}
- timekeeping_update(true);
+ timekeeping_update(&timekeeper, true);
write_sequnlock_irqrestore(&timekeeper.lock, flags);
@@ -497,7 +541,7 @@
do {
seq = read_seqbegin(&timekeeper.lock);
- nsecs = timekeeping_get_ns_raw();
+ nsecs = timekeeping_get_ns_raw(&timekeeper);
*ts = timekeeper.raw_time;
} while (read_seqretry(&timekeeper.lock, seq));
@@ -532,6 +576,7 @@
{
unsigned long seq;
u64 ret;
+
do {
seq = read_seqbegin(&timekeeper.lock);
@@ -592,18 +637,17 @@
clock = clocksource_default_clock();
if (clock->enable)
clock->enable(clock);
- timekeeper_setup_internals(clock);
+ tk_setup_internals(&timekeeper, clock);
- timekeeper.xtime.tv_sec = now.tv_sec;
- timekeeper.xtime.tv_nsec = now.tv_nsec;
+ tk_set_xtime(&timekeeper, &now);
timekeeper.raw_time.tv_sec = 0;
timekeeper.raw_time.tv_nsec = 0;
- if (boot.tv_sec == 0 && boot.tv_nsec == 0) {
- boot.tv_sec = timekeeper.xtime.tv_sec;
- boot.tv_nsec = timekeeper.xtime.tv_nsec;
- }
+ if (boot.tv_sec == 0 && boot.tv_nsec == 0)
+ boot = tk_xtime(&timekeeper);
+
set_normalized_timespec(&timekeeper.wall_to_monotonic,
-boot.tv_sec, -boot.tv_nsec);
+ update_rt_offset(&timekeeper);
timekeeper.total_sleep_time.tv_sec = 0;
timekeeper.total_sleep_time.tv_nsec = 0;
write_sequnlock_irqrestore(&timekeeper.lock, flags);
@@ -612,6 +656,12 @@
/* time in seconds when suspend began */
static struct timespec timekeeping_suspend_time;
+static void update_sleep_time(struct timespec t)
+{
+ timekeeper.total_sleep_time = t;
+ timekeeper.offs_boot = timespec_to_ktime(t);
+}
+
/**
* __timekeeping_inject_sleeptime - Internal function to add sleep interval
* @delta: pointer to a timespec delta value
@@ -619,7 +669,8 @@
* Takes a timespec offset measuring a suspend interval and properly
* adds the sleep offset to the timekeeping variables.
*/
-static void __timekeeping_inject_sleeptime(struct timespec *delta)
+static void __timekeeping_inject_sleeptime(struct timekeeper *tk,
+ struct timespec *delta)
{
if (!timespec_valid(delta)) {
printk(KERN_WARNING "__timekeeping_inject_sleeptime: Invalid "
@@ -627,11 +678,9 @@
return;
}
- timekeeper.xtime = timespec_add(timekeeper.xtime, *delta);
- timekeeper.wall_to_monotonic =
- timespec_sub(timekeeper.wall_to_monotonic, *delta);
- timekeeper.total_sleep_time = timespec_add(
- timekeeper.total_sleep_time, *delta);
+ tk_xtime_add(tk, delta);
+ tk->wall_to_monotonic = timespec_sub(tk->wall_to_monotonic, *delta);
+ update_sleep_time(timespec_add(tk->total_sleep_time, *delta));
}
@@ -657,11 +706,11 @@
write_seqlock_irqsave(&timekeeper.lock, flags);
- timekeeping_forward_now();
+ timekeeping_forward_now(&timekeeper);
- __timekeeping_inject_sleeptime(delta);
+ __timekeeping_inject_sleeptime(&timekeeper, delta);
- timekeeping_update(true);
+ timekeeping_update(&timekeeper, true);
write_sequnlock_irqrestore(&timekeeper.lock, flags);
@@ -690,12 +739,13 @@
if (timespec_compare(&ts, &timekeeping_suspend_time) > 0) {
ts = timespec_sub(ts, timekeeping_suspend_time);
- __timekeeping_inject_sleeptime(&ts);
+ __timekeeping_inject_sleeptime(&timekeeper, &ts);
}
/* re-base the last cycle value */
timekeeper.clock->cycle_last = timekeeper.clock->read(timekeeper.clock);
timekeeper.ntp_error = 0;
timekeeping_suspended = 0;
+ timekeeping_update(&timekeeper, false);
write_sequnlock_irqrestore(&timekeeper.lock, flags);
touch_softlockup_watchdog();
@@ -715,7 +765,7 @@
read_persistent_clock(&timekeeping_suspend_time);
write_seqlock_irqsave(&timekeeper.lock, flags);
- timekeeping_forward_now();
+ timekeeping_forward_now(&timekeeper);
timekeeping_suspended = 1;
/*
@@ -724,7 +774,7 @@
* try to compensate so the difference in system time
* and persistent_clock time stays close to constant.
*/
- delta = timespec_sub(timekeeper.xtime, timekeeping_suspend_time);
+ delta = timespec_sub(tk_xtime(&timekeeper), timekeeping_suspend_time);
delta_delta = timespec_sub(delta, old_delta);
if (abs(delta_delta.tv_sec) >= 2) {
/*
@@ -763,7 +813,8 @@
* If the error is already larger, we look ahead even further
* to compensate for late or lost adjustments.
*/
-static __always_inline int timekeeping_bigadjust(s64 error, s64 *interval,
+static __always_inline int timekeeping_bigadjust(struct timekeeper *tk,
+ s64 error, s64 *interval,
s64 *offset)
{
s64 tick_error, i;
@@ -779,7 +830,7 @@
* here. This is tuned so that an error of about 1 msec is adjusted
* within about 1 sec (or 2^20 nsec in 2^SHIFT_HZ ticks).
*/
- error2 = timekeeper.ntp_error >> (NTP_SCALE_SHIFT + 22 - 2 * SHIFT_HZ);
+ error2 = tk->ntp_error >> (NTP_SCALE_SHIFT + 22 - 2 * SHIFT_HZ);
error2 = abs(error2);
for (look_ahead = 0; error2 > 0; look_ahead++)
error2 >>= 2;
@@ -788,8 +839,8 @@
* Now calculate the error in (1 << look_ahead) ticks, but first
* remove the single look ahead already included in the error.
*/
- tick_error = ntp_tick_length() >> (timekeeper.ntp_error_shift + 1);
- tick_error -= timekeeper.xtime_interval >> 1;
+ tick_error = ntp_tick_length() >> (tk->ntp_error_shift + 1);
+ tick_error -= tk->xtime_interval >> 1;
error = ((error - tick_error) >> look_ahead) + tick_error;
/* Finally calculate the adjustment shift value. */
@@ -814,9 +865,9 @@
* this is optimized for the most common adjustments of -1,0,1,
* for other values we can do a bit more work.
*/
-static void timekeeping_adjust(s64 offset)
+static void timekeeping_adjust(struct timekeeper *tk, s64 offset)
{
- s64 error, interval = timekeeper.cycle_interval;
+ s64 error, interval = tk->cycle_interval;
int adj;
/*
@@ -832,7 +883,7 @@
*
* Note: It does not "save" on aggravation when reading the code.
*/
- error = timekeeper.ntp_error >> (timekeeper.ntp_error_shift - 1);
+ error = tk->ntp_error >> (tk->ntp_error_shift - 1);
if (error > interval) {
/*
* We now divide error by 4(via shift), which checks if
@@ -854,7 +905,8 @@
if (likely(error <= interval))
adj = 1;
else
- adj = timekeeping_bigadjust(error, &interval, &offset);
+ adj = timekeeping_bigadjust(tk, error, &interval,
+ &offset);
} else if (error < -interval) {
/* See comment above, this is just switched for the negative */
error >>= 2;
@@ -863,18 +915,17 @@
interval = -interval;
offset = -offset;
} else
- adj = timekeeping_bigadjust(error, &interval, &offset);
- } else /* No adjustment needed */
+ adj = timekeeping_bigadjust(tk, error, &interval,
+ &offset);
+ } else
return;
- if (unlikely(timekeeper.clock->maxadj &&
- (timekeeper.mult + adj >
- timekeeper.clock->mult + timekeeper.clock->maxadj))) {
+ if (unlikely(tk->clock->maxadj &&
+ (tk->mult + adj > tk->clock->mult + tk->clock->maxadj))) {
printk_once(KERN_WARNING
"Adjusting %s more than 11%% (%ld vs %ld)\n",
- timekeeper.clock->name, (long)timekeeper.mult + adj,
- (long)timekeeper.clock->mult +
- timekeeper.clock->maxadj);
+ tk->clock->name, (long)tk->mult + adj,
+ (long)tk->clock->mult + tk->clock->maxadj);
}
/*
* So the following can be confusing.
@@ -925,11 +976,60 @@
*
* XXX - TODO: Doc ntp_error calculation.
*/
- timekeeper.mult += adj;
- timekeeper.xtime_interval += interval;
- timekeeper.xtime_nsec -= offset;
- timekeeper.ntp_error -= (interval - offset) <<
- timekeeper.ntp_error_shift;
+ tk->mult += adj;
+ tk->xtime_interval += interval;
+ tk->xtime_nsec -= offset;
+ tk->ntp_error -= (interval - offset) << tk->ntp_error_shift;
+
+ /*
+ * It may be possible that when we entered this function, xtime_nsec
+ * was very small. Further, if we're slightly speeding the clocksource
+ * in the code above, its possible the required corrective factor to
+ * xtime_nsec could cause it to underflow.
+ *
+ * Now, since we already accumulated the second, cannot simply roll
+ * the accumulated second back, since the NTP subsystem has been
+ * notified via second_overflow. So instead we push xtime_nsec forward
+ * by the amount we underflowed, and add that amount into the error.
+ *
+ * We'll correct this error next time through this function, when
+ * xtime_nsec is not as small.
+ */
+ if (unlikely((s64)tk->xtime_nsec < 0)) {
+ s64 neg = -(s64)tk->xtime_nsec;
+ tk->xtime_nsec = 0;
+ tk->ntp_error += neg << tk->ntp_error_shift;
+ }
+
+}
+
+
+/**
+ * accumulate_nsecs_to_secs - Accumulates nsecs into secs
+ *
+ * Helper function that accumulates a the nsecs greater then a second
+ * from the xtime_nsec field to the xtime_secs field.
+ * It also calls into the NTP code to handle leapsecond processing.
+ *
+ */
+static inline void accumulate_nsecs_to_secs(struct timekeeper *tk)
+{
+ u64 nsecps = (u64)NSEC_PER_SEC << tk->shift;
+
+ while (tk->xtime_nsec >= nsecps) {
+ int leap;
+
+ tk->xtime_nsec -= nsecps;
+ tk->xtime_sec++;
+
+ /* Figure out if its a leap sec and apply if needed */
+ leap = second_overflow(tk->xtime_sec);
+ tk->xtime_sec += leap;
+ tk->wall_to_monotonic.tv_sec -= leap;
+ if (leap)
+ clock_was_set_delayed();
+
+ }
}
@@ -942,44 +1042,36 @@
*
* Returns the unconsumed cycles.
*/
-static cycle_t logarithmic_accumulation(cycle_t offset, int shift)
+static cycle_t logarithmic_accumulation(struct timekeeper *tk, cycle_t offset,
+ u32 shift)
{
- u64 nsecps = (u64)NSEC_PER_SEC << timekeeper.shift;
u64 raw_nsecs;
- /* If the offset is smaller than a shifted interval, do nothing */
- if (offset < timekeeper.cycle_interval<<shift)
+ /* If the offset is smaller then a shifted interval, do nothing */
+ if (offset < tk->cycle_interval<<shift)
return offset;
/* Accumulate one shifted interval */
- offset -= timekeeper.cycle_interval << shift;
- timekeeper.clock->cycle_last += timekeeper.cycle_interval << shift;
+ offset -= tk->cycle_interval << shift;
+ tk->clock->cycle_last += tk->cycle_interval << shift;
- timekeeper.xtime_nsec += timekeeper.xtime_interval << shift;
- while (timekeeper.xtime_nsec >= nsecps) {
- int leap;
- timekeeper.xtime_nsec -= nsecps;
- timekeeper.xtime.tv_sec++;
- leap = second_overflow(timekeeper.xtime.tv_sec);
- timekeeper.xtime.tv_sec += leap;
- timekeeper.wall_to_monotonic.tv_sec -= leap;
- }
+ tk->xtime_nsec += tk->xtime_interval << shift;
+ accumulate_nsecs_to_secs(tk);
/* Accumulate raw time */
- raw_nsecs = timekeeper.raw_interval << shift;
- raw_nsecs += timekeeper.raw_time.tv_nsec;
+ raw_nsecs = tk->raw_interval << shift;
+ raw_nsecs += tk->raw_time.tv_nsec;
if (raw_nsecs >= NSEC_PER_SEC) {
u64 raw_secs = raw_nsecs;
raw_nsecs = do_div(raw_secs, NSEC_PER_SEC);
- timekeeper.raw_time.tv_sec += raw_secs;
+ tk->raw_time.tv_sec += raw_secs;
}
- timekeeper.raw_time.tv_nsec = raw_nsecs;
+ tk->raw_time.tv_nsec = raw_nsecs;
/* Accumulate error between NTP and clock interval */
- timekeeper.ntp_error += ntp_tick_length() << shift;
- timekeeper.ntp_error -=
- (timekeeper.xtime_interval + timekeeper.xtime_remainder) <<
- (timekeeper.ntp_error_shift + shift);
+ tk->ntp_error += ntp_tick_length() << shift;
+ tk->ntp_error -= (tk->xtime_interval + tk->xtime_remainder) <<
+ (tk->ntp_error_shift + shift);
return offset;
}
@@ -995,6 +1087,7 @@
cycle_t offset;
int shift = 0, maxshift;
unsigned long flags;
+ s64 remainder;
write_seqlock_irqsave(&timekeeper.lock, flags);
@@ -1009,8 +1102,6 @@
#else
offset = (clock->read(clock) - clock->cycle_last) & clock->mask;
#endif
- timekeeper.xtime_nsec = (s64)timekeeper.xtime.tv_nsec <<
- timekeeper.shift;
/*
* With NO_HZ we may have to accumulate many cycle_intervals
@@ -1026,62 +1117,36 @@
maxshift = (64 - (ilog2(ntp_tick_length())+1)) - 1;
shift = min(shift, maxshift);
while (offset >= timekeeper.cycle_interval) {
- offset = logarithmic_accumulation(offset, shift);
+ offset = logarithmic_accumulation(&timekeeper, offset, shift);
if(offset < timekeeper.cycle_interval<<shift)
shift--;
}
/* correct the clock when NTP error is too big */
- timekeeping_adjust(offset);
-
- /*
- * Since in the loop above, we accumulate any amount of time
- * in xtime_nsec over a second into xtime.tv_sec, its possible for
- * xtime_nsec to be fairly small after the loop. Further, if we're
- * slightly speeding the clocksource up in timekeeping_adjust(),
- * its possible the required corrective factor to xtime_nsec could
- * cause it to underflow.
- *
- * Now, we cannot simply roll the accumulated second back, since
- * the NTP subsystem has been notified via second_overflow. So
- * instead we push xtime_nsec forward by the amount we underflowed,
- * and add that amount into the error.
- *
- * We'll correct this error next time through this function, when
- * xtime_nsec is not as small.
- */
- if (unlikely((s64)timekeeper.xtime_nsec < 0)) {
- s64 neg = -(s64)timekeeper.xtime_nsec;
- timekeeper.xtime_nsec = 0;
- timekeeper.ntp_error += neg << timekeeper.ntp_error_shift;
- }
+ timekeeping_adjust(&timekeeper, offset);
/*
- * Store full nanoseconds into xtime after rounding it up and
- * add the remainder to the error difference.
- */
- timekeeper.xtime.tv_nsec = ((s64)timekeeper.xtime_nsec >>
- timekeeper.shift) + 1;
- timekeeper.xtime_nsec -= (s64)timekeeper.xtime.tv_nsec <<
- timekeeper.shift;
- timekeeper.ntp_error += timekeeper.xtime_nsec <<
- timekeeper.ntp_error_shift;
+ * Store only full nanoseconds into xtime_nsec after rounding
+ * it up and add the remainder to the error difference.
+ * XXX - This is necessary to avoid small 1ns inconsistnecies caused
+ * by truncating the remainder in vsyscalls. However, it causes
+ * additional work to be done in timekeeping_adjust(). Once
+ * the vsyscall implementations are converted to use xtime_nsec
+ * (shifted nanoseconds), this can be killed.
+ */
+ remainder = timekeeper.xtime_nsec & ((1 << timekeeper.shift) - 1);
+ timekeeper.xtime_nsec -= remainder;
+ timekeeper.xtime_nsec += 1 << timekeeper.shift;
+ timekeeper.ntp_error += remainder << timekeeper.ntp_error_shift;
/*
* Finally, make sure that after the rounding
- * xtime.tv_nsec isn't larger than NSEC_PER_SEC
+ * xtime_nsec isn't larger than NSEC_PER_SEC
*/
- if (unlikely(timekeeper.xtime.tv_nsec >= NSEC_PER_SEC)) {
- int leap;
- timekeeper.xtime.tv_nsec -= NSEC_PER_SEC;
- timekeeper.xtime.tv_sec++;
- leap = second_overflow(timekeeper.xtime.tv_sec);
- timekeeper.xtime.tv_sec += leap;
- timekeeper.wall_to_monotonic.tv_sec -= leap;
- }
+ accumulate_nsecs_to_secs(&timekeeper);
- timekeeping_update(false);
+ timekeeping_update(&timekeeper, false);
out:
write_sequnlock_irqrestore(&timekeeper.lock, flags);
@@ -1126,21 +1191,20 @@
{
struct timespec tomono, sleep;
unsigned int seq;
- s64 nsecs;
WARN_ON(timekeeping_suspended);
do {
seq = read_seqbegin(&timekeeper.lock);
- *ts = timekeeper.xtime;
+ ts->tv_sec = timekeeper.xtime_sec;
+ ts->tv_nsec = timekeeping_get_ns(&timekeeper);
tomono = timekeeper.wall_to_monotonic;
sleep = timekeeper.total_sleep_time;
- nsecs = timekeeping_get_ns();
} while (read_seqretry(&timekeeper.lock, seq));
set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec + sleep.tv_sec,
- ts->tv_nsec + tomono.tv_nsec + sleep.tv_nsec + nsecs);
+ ts->tv_nsec + tomono.tv_nsec + sleep.tv_nsec);
}
EXPORT_SYMBOL_GPL(get_monotonic_boottime);
@@ -1173,13 +1237,13 @@
unsigned long get_seconds(void)
{
- return timekeeper.xtime.tv_sec;
+ return timekeeper.xtime_sec;
}
EXPORT_SYMBOL(get_seconds);
struct timespec __current_kernel_time(void)
{
- return timekeeper.xtime;
+ return tk_xtime(&timekeeper);
}
struct timespec current_kernel_time(void)
@@ -1190,7 +1254,7 @@
do {
seq = read_seqbegin(&timekeeper.lock);
- now = timekeeper.xtime;
+ now = tk_xtime(&timekeeper);
} while (read_seqretry(&timekeeper.lock, seq));
return now;
@@ -1205,7 +1269,7 @@
do {
seq = read_seqbegin(&timekeeper.lock);
- now = timekeeper.xtime;
+ now = tk_xtime(&timekeeper);
mono = timekeeper.wall_to_monotonic;
} while (read_seqretry(&timekeeper.lock, seq));
@@ -1240,12 +1304,43 @@
do {
seq = read_seqbegin(&timekeeper.lock);
- *xtim = timekeeper.xtime;
+ *xtim = tk_xtime(&timekeeper);
*wtom = timekeeper.wall_to_monotonic;
*sleep = timekeeper.total_sleep_time;
} while (read_seqretry(&timekeeper.lock, seq));
}
+#ifdef CONFIG_HIGH_RES_TIMERS
+/**
+ * ktime_get_update_offsets - hrtimer helper
+ * @offs_real: pointer to storage for monotonic -> realtime offset
+ * @offs_boot: pointer to storage for monotonic -> boottime offset
+ *
+ * Returns current monotonic time and updates the offsets
+ * Called from hrtimer_interupt() or retrigger_next_event()
+ */
+ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot)
+{
+ ktime_t now;
+ unsigned int seq;
+ u64 secs, nsecs;
+
+ do {
+ seq = read_seqbegin(&timekeeper.lock);
+
+ secs = timekeeper.xtime_sec;
+ nsecs = timekeeping_get_ns(&timekeeper);
+
+ *offs_real = timekeeper.offs_real;
+ *offs_boot = timekeeper.offs_boot;
+ } while (read_seqretry(&timekeeper.lock, seq));
+
+ now = ktime_add_ns(ktime_set(secs, 0), nsecs);
+ now = ktime_sub(now, *offs_real);
+ return now;
+}
+#endif
+
/**
* ktime_get_monotonic_offset() - get wall_to_monotonic in ktime_t format
*/
diff --git a/kernel/time/timer_list.c b/kernel/time/timer_list.c
index 3258455..af5a7e9 100644
--- a/kernel/time/timer_list.c
+++ b/kernel/time/timer_list.c
@@ -167,7 +167,7 @@
{
struct tick_sched *ts = tick_get_tick_sched(cpu);
P(nohz_mode);
- P_ns(idle_tick);
+ P_ns(last_tick);
P(tick_stopped);
P(idle_jiffies);
P(idle_calls);
@@ -259,7 +259,7 @@
u64 now = ktime_to_ns(ktime_get());
int cpu;
- SEQ_printf(m, "Timer List Version: v0.6\n");
+ SEQ_printf(m, "Timer List Version: v0.7\n");
SEQ_printf(m, "HRTIMER_MAX_CLOCK_BASES: %d\n", HRTIMER_MAX_CLOCK_BASES);
SEQ_printf(m, "now at %Ld nsecs\n", (unsigned long long)now);
diff --git a/kernel/timer.c b/kernel/timer.c
index 6ec7e7e..a61c093 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -77,6 +77,7 @@
struct timer_list *running_timer;
unsigned long timer_jiffies;
unsigned long next_timer;
+ unsigned long active_timers;
struct tvec_root tv1;
struct tvec tv2;
struct tvec tv3;
@@ -330,7 +331,8 @@
}
EXPORT_SYMBOL_GPL(set_timer_slack);
-static void internal_add_timer(struct tvec_base *base, struct timer_list *timer)
+static void
+__internal_add_timer(struct tvec_base *base, struct timer_list *timer)
{
unsigned long expires = timer->expires;
unsigned long idx = expires - base->timer_jiffies;
@@ -372,6 +374,19 @@
list_add_tail(&timer->entry, vec);
}
+static void internal_add_timer(struct tvec_base *base, struct timer_list *timer)
+{
+ __internal_add_timer(base, timer);
+ /*
+ * Update base->active_timers and base->next_timer
+ */
+ if (!tbase_get_deferrable(timer->base)) {
+ if (time_before(timer->expires, base->next_timer))
+ base->next_timer = timer->expires;
+ base->active_timers++;
+ }
+}
+
#ifdef CONFIG_TIMER_STATS
void __timer_stats_timer_set_start_info(struct timer_list *timer, void *addr)
{
@@ -654,8 +669,7 @@
}
EXPORT_SYMBOL(init_timer_deferrable_key);
-static inline void detach_timer(struct timer_list *timer,
- int clear_pending)
+static inline void detach_timer(struct timer_list *timer, bool clear_pending)
{
struct list_head *entry = &timer->entry;
@@ -667,6 +681,29 @@
entry->prev = LIST_POISON2;
}
+static inline void
+detach_expired_timer(struct timer_list *timer, struct tvec_base *base)
+{
+ detach_timer(timer, true);
+ if (!tbase_get_deferrable(timer->base))
+ timer->base->active_timers--;
+}
+
+static int detach_if_pending(struct timer_list *timer, struct tvec_base *base,
+ bool clear_pending)
+{
+ if (!timer_pending(timer))
+ return 0;
+
+ detach_timer(timer, clear_pending);
+ if (!tbase_get_deferrable(timer->base)) {
+ timer->base->active_timers--;
+ if (timer->expires == base->next_timer)
+ base->next_timer = base->timer_jiffies;
+ }
+ return 1;
+}
+
/*
* We are using hashed locking: holding per_cpu(tvec_bases).lock
* means that all timers which are tied to this base via timer->base are
@@ -712,16 +749,9 @@
base = lock_timer_base(timer, &flags);
- if (timer_pending(timer)) {
- detach_timer(timer, 0);
- if (timer->expires == base->next_timer &&
- !tbase_get_deferrable(timer->base))
- base->next_timer = base->timer_jiffies;
- ret = 1;
- } else {
- if (pending_only)
- goto out_unlock;
- }
+ ret = detach_if_pending(timer, base, false);
+ if (!ret && pending_only)
+ goto out_unlock;
debug_activate(timer, expires);
@@ -752,9 +782,6 @@
}
timer->expires = expires;
- if (time_before(timer->expires, base->next_timer) &&
- !tbase_get_deferrable(timer->base))
- base->next_timer = timer->expires;
internal_add_timer(base, timer);
out_unlock:
@@ -920,9 +947,6 @@
spin_lock_irqsave(&base->lock, flags);
timer_set_base(timer, base);
debug_activate(timer, timer->expires);
- if (time_before(timer->expires, base->next_timer) &&
- !tbase_get_deferrable(timer->base))
- base->next_timer = timer->expires;
internal_add_timer(base, timer);
/*
* Check whether the other CPU is idle and needs to be
@@ -959,13 +983,7 @@
timer_stats_timer_clear_start_info(timer);
if (timer_pending(timer)) {
base = lock_timer_base(timer, &flags);
- if (timer_pending(timer)) {
- detach_timer(timer, 1);
- if (timer->expires == base->next_timer &&
- !tbase_get_deferrable(timer->base))
- base->next_timer = base->timer_jiffies;
- ret = 1;
- }
+ ret = detach_if_pending(timer, base, true);
spin_unlock_irqrestore(&base->lock, flags);
}
@@ -990,19 +1008,10 @@
base = lock_timer_base(timer, &flags);
- if (base->running_timer == timer)
- goto out;
-
- timer_stats_timer_clear_start_info(timer);
- ret = 0;
- if (timer_pending(timer)) {
- detach_timer(timer, 1);
- if (timer->expires == base->next_timer &&
- !tbase_get_deferrable(timer->base))
- base->next_timer = base->timer_jiffies;
- ret = 1;
+ if (base->running_timer != timer) {
+ timer_stats_timer_clear_start_info(timer);
+ ret = detach_if_pending(timer, base, true);
}
-out:
spin_unlock_irqrestore(&base->lock, flags);
return ret;
@@ -1089,7 +1098,8 @@
*/
list_for_each_entry_safe(timer, tmp, &tv_list, entry) {
BUG_ON(tbase_get_base(timer->base) != base);
- internal_add_timer(base, timer);
+ /* No accounting, while moving them */
+ __internal_add_timer(base, timer);
}
return index;
@@ -1178,7 +1188,7 @@
timer_stats_account_timer(timer);
base->running_timer = timer;
- detach_timer(timer, 1);
+ detach_expired_timer(timer, base);
spin_unlock_irq(&base->lock);
call_timer_fn(timer, fn, data);
@@ -1316,18 +1326,21 @@
unsigned long get_next_timer_interrupt(unsigned long now)
{
struct tvec_base *base = __this_cpu_read(tvec_bases);
- unsigned long expires;
+ unsigned long expires = now + NEXT_TIMER_MAX_DELTA;
/*
* Pretend that there is no timer pending if the cpu is offline.
* Possible pending timers will be migrated later to an active cpu.
*/
if (cpu_is_offline(smp_processor_id()))
- return now + NEXT_TIMER_MAX_DELTA;
+ return expires;
+
spin_lock(&base->lock);
- if (time_before_eq(base->next_timer, base->timer_jiffies))
- base->next_timer = __next_timer_interrupt(base);
- expires = base->next_timer;
+ if (base->active_timers) {
+ if (time_before_eq(base->next_timer, base->timer_jiffies))
+ base->next_timer = __next_timer_interrupt(base);
+ expires = base->next_timer;
+ }
spin_unlock(&base->lock);
if (time_before_eq(expires, now))
@@ -1704,6 +1717,7 @@
base->timer_jiffies = jiffies;
base->next_timer = base->timer_jiffies;
+ base->active_timers = 0;
return 0;
}
@@ -1714,11 +1728,9 @@
while (!list_empty(head)) {
timer = list_first_entry(head, struct timer_list, entry);
- detach_timer(timer, 0);
+ /* We ignore the accounting on the dying cpu */
+ detach_timer(timer, false);
timer_set_base(timer, new_base);
- if (time_before(timer->expires, new_base->next_timer) &&
- !tbase_get_deferrable(timer->base))
- new_base->next_timer = timer->expires;
internal_add_timer(new_base, timer);
}
}
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index a008663..b4f20fb 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -312,7 +312,7 @@
static int __register_ftrace_function(struct ftrace_ops *ops)
{
- if (ftrace_disabled)
+ if (unlikely(ftrace_disabled))
return -ENODEV;
if (FTRACE_WARN_ON(ops == &global_ops))
@@ -4299,16 +4299,12 @@
mutex_lock(&ftrace_lock);
- if (unlikely(ftrace_disabled))
- goto out_unlock;
-
ret = __register_ftrace_function(ops);
if (!ret)
ret = ftrace_startup(ops, 0);
-
- out_unlock:
mutex_unlock(&ftrace_lock);
+
return ret;
}
EXPORT_SYMBOL_GPL(register_ftrace_function);
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 1d0f6a8..49491fa 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1075,6 +1075,7 @@
rb_init_page(bpage->page);
INIT_LIST_HEAD(&cpu_buffer->reader_page->list);
+ INIT_LIST_HEAD(&cpu_buffer->new_pages);
ret = rb_allocate_pages(cpu_buffer, nr_pages);
if (ret < 0)
@@ -1346,10 +1347,9 @@
* If something was added to this page, it was full
* since it is not the tail page. So we deduct the
* bytes consumed in ring buffer from here.
- * No need to update overruns, since this page is
- * deleted from ring buffer and its entries are
- * already accounted for.
+ * Increment overrun to account for the lost events.
*/
+ local_add(page_entries, &cpu_buffer->overrun);
local_sub(BUF_PAGE_SIZE, &cpu_buffer->entries_bytes);
}
@@ -3239,6 +3239,10 @@
if (cpu_buffer->commit_page == cpu_buffer->reader_page)
goto out;
+ /* Don't bother swapping if the ring buffer is empty */
+ if (rb_num_of_entries(cpu_buffer) == 0)
+ goto out;
+
/*
* Reset the reader page to size zero.
*/
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 68032c6..a120f98 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -371,7 +371,7 @@
void tracing_off(void)
{
if (global_trace.buffer)
- ring_buffer_record_on(global_trace.buffer);
+ ring_buffer_record_off(global_trace.buffer);
/*
* This flag is only looked at when buffers haven't been
* allocated yet. We don't really care about the race
@@ -830,6 +830,8 @@
current_trace = saved_tracer;
if (ret) {
printk(KERN_CONT "FAILED!\n");
+ /* Add the warning after printing 'FAILED' */
+ WARN_ON(1);
goto out;
}
/* Only reset on passing, to avoid touching corrupted buffers */
@@ -1708,9 +1710,11 @@
static void trace_iterator_increment(struct trace_iterator *iter)
{
+ struct ring_buffer_iter *buf_iter = trace_buffer_iter(iter, iter->cpu);
+
iter->idx++;
- if (iter->buffer_iter[iter->cpu])
- ring_buffer_read(iter->buffer_iter[iter->cpu], NULL);
+ if (buf_iter)
+ ring_buffer_read(buf_iter, NULL);
}
static struct trace_entry *
@@ -1718,7 +1722,7 @@
unsigned long *lost_events)
{
struct ring_buffer_event *event;
- struct ring_buffer_iter *buf_iter = iter->buffer_iter[cpu];
+ struct ring_buffer_iter *buf_iter = trace_buffer_iter(iter, cpu);
if (buf_iter)
event = ring_buffer_iter_peek(buf_iter, ts);
@@ -1856,10 +1860,10 @@
tr->data[cpu]->skipped_entries = 0;
- if (!iter->buffer_iter[cpu])
+ buf_iter = trace_buffer_iter(iter, cpu);
+ if (!buf_iter)
return;
- buf_iter = iter->buffer_iter[cpu];
ring_buffer_iter_reset(buf_iter);
/*
@@ -2205,13 +2209,15 @@
int trace_empty(struct trace_iterator *iter)
{
+ struct ring_buffer_iter *buf_iter;
int cpu;
/* If we are looking at one CPU buffer, only check that one */
if (iter->cpu_file != TRACE_PIPE_ALL_CPU) {
cpu = iter->cpu_file;
- if (iter->buffer_iter[cpu]) {
- if (!ring_buffer_iter_empty(iter->buffer_iter[cpu]))
+ buf_iter = trace_buffer_iter(iter, cpu);
+ if (buf_iter) {
+ if (!ring_buffer_iter_empty(buf_iter))
return 0;
} else {
if (!ring_buffer_empty_cpu(iter->tr->buffer, cpu))
@@ -2221,8 +2227,9 @@
}
for_each_tracing_cpu(cpu) {
- if (iter->buffer_iter[cpu]) {
- if (!ring_buffer_iter_empty(iter->buffer_iter[cpu]))
+ buf_iter = trace_buffer_iter(iter, cpu);
+ if (buf_iter) {
+ if (!ring_buffer_iter_empty(buf_iter))
return 0;
} else {
if (!ring_buffer_empty_cpu(iter->tr->buffer, cpu))
@@ -2381,6 +2388,11 @@
if (!iter)
return ERR_PTR(-ENOMEM);
+ iter->buffer_iter = kzalloc(sizeof(*iter->buffer_iter) * num_possible_cpus(),
+ GFP_KERNEL);
+ if (!iter->buffer_iter)
+ goto release;
+
/*
* We make a copy of the current tracer to avoid concurrent
* changes on it while we are reading.
@@ -2441,6 +2453,8 @@
fail:
mutex_unlock(&trace_types_lock);
kfree(iter->trace);
+ kfree(iter->buffer_iter);
+release:
seq_release_private(inode, file);
return ERR_PTR(-ENOMEM);
}
@@ -2481,6 +2495,7 @@
mutex_destroy(&iter->mutex);
free_cpumask_var(iter->started);
kfree(iter->trace);
+ kfree(iter->buffer_iter);
seq_release_private(inode, file);
return 0;
}
@@ -3609,6 +3624,7 @@
.pages = pages_def,
.partial = partial_def,
.nr_pages = 0, /* This gets updated below. */
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &tracing_pipe_buf_ops,
.spd_release = tracing_spd_release_pipe,
@@ -3680,7 +3696,7 @@
ret = splice_to_pipe(pipe, &spd);
out:
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
return ret;
out_err:
@@ -4231,6 +4247,7 @@
struct splice_pipe_desc spd = {
.pages = pages_def,
.partial = partial_def,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &buffer_pipe_buf_ops,
.spd_release = buffer_spd_release,
@@ -4318,7 +4335,7 @@
}
ret = splice_to_pipe(pipe, &spd);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
out:
return ret;
}
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index 5aec220..55e1f7f 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -317,6 +317,14 @@
#define TRACE_PIPE_ALL_CPU -1
+static inline struct ring_buffer_iter *
+trace_buffer_iter(struct trace_iterator *iter, int cpu)
+{
+ if (iter->buffer_iter && iter->buffer_iter[cpu])
+ return iter->buffer_iter[cpu];
+ return NULL;
+}
+
int tracer_init(struct tracer *t, struct trace_array *tr);
int tracing_is_enabled(void);
void trace_wake_up(void);
diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c
index a7d2a4c..ce27c8b 100644
--- a/kernel/trace/trace_functions_graph.c
+++ b/kernel/trace/trace_functions_graph.c
@@ -538,7 +538,7 @@
next = &data->ret;
} else {
- ring_iter = iter->buffer_iter[iter->cpu];
+ ring_iter = trace_buffer_iter(iter, iter->cpu);
/* First peek to compare current entry and the next one */
if (ring_iter)
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index df611a0..123b189 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -1325,4 +1325,4 @@
return 0;
}
-device_initcall(init_events);
+early_initcall(init_events);
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index e5e1d85..4b1dfba 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -372,6 +372,13 @@
#ifdef CONFIG_HARDLOCKUP_DETECTOR
+/*
+ * People like the simple clean cpu node info on boot.
+ * Reduce the watchdog noise by only printing messages
+ * that are different from what cpu0 displayed.
+ */
+static unsigned long cpu0_err;
+
static int watchdog_nmi_enable(int cpu)
{
struct perf_event_attr *wd_attr;
@@ -390,11 +397,21 @@
/* Try to register using hardware perf events */
event = perf_event_create_kernel_counter(wd_attr, cpu, NULL, watchdog_overflow_callback, NULL);
+
+ /* save cpu0 error for future comparision */
+ if (cpu == 0 && IS_ERR(event))
+ cpu0_err = PTR_ERR(event);
+
if (!IS_ERR(event)) {
- pr_info("enabled, takes one hw-pmu counter.\n");
+ /* only print for cpu0 or different than cpu0 */
+ if (cpu == 0 || cpu0_err)
+ pr_info("enabled on all CPUs, permanently consumes one hw-PMU counter.\n");
goto out_save;
}
+ /* skip displaying the same error again */
+ if (cpu > 0 && (PTR_ERR(event) == cpu0_err))
+ return PTR_ERR(event);
/* vary the KERN level based on the returned errno */
if (PTR_ERR(event) == -EOPNOTSUPP)
diff --git a/lib/Kconfig b/lib/Kconfig
index a9e1540..8269d56 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -378,14 +378,6 @@
It is used to implement RSA digital signature verification,
which is used by IMA/EVM digital signature extension.
-config MPILIB_EXTRA
- bool
- depends on MPILIB
- help
- Additional sources of multiprecision maths library from GnuPG.
- This code is unnecessary for RSA digital signature verification,
- but can be compiled if needed.
-
config SIGNATURE
tristate
depends on KEYS && CRYPTO
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 5d3e328..4a18650 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -241,6 +241,26 @@
default 0 if !BOOTPARAM_SOFTLOCKUP_PANIC
default 1 if BOOTPARAM_SOFTLOCKUP_PANIC
+config PANIC_ON_OOPS
+ bool "Panic on Oops" if EXPERT
+ default n
+ help
+ Say Y here to enable the kernel to panic when it oopses. This
+ has the same effect as setting oops=panic on the kernel command
+ line.
+
+ This feature is useful to ensure that the kernel does not do
+ anything erroneous after an oops which could result in data
+ corruption or other issues.
+
+ Say N if unsure.
+
+config PANIC_ON_OOPS_VALUE
+ int
+ range 0 1
+ default 0 if !PANIC_ON_OOPS
+ default 1 if PANIC_ON_OOPS
+
config DETECT_HUNG_TASK
bool "Detect Hung Tasks"
depends on DEBUG_KERNEL
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index 518aea7..66ce414 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -78,7 +78,7 @@
static DEFINE_SPINLOCK(free_entries_lock);
/* Global disable flag - will be set in case of an error */
-static bool global_disable __read_mostly;
+static u32 global_disable __read_mostly;
/* Global error count */
static u32 error_count;
@@ -657,7 +657,7 @@
global_disable_dent = debugfs_create_bool("disabled", 0444,
dma_debug_dent,
- (u32 *)&global_disable);
+ &global_disable);
if (!global_disable_dent)
goto out_err;
diff --git a/lib/fault-inject.c b/lib/fault-inject.c
index 6805453..f7210ad 100644
--- a/lib/fault-inject.c
+++ b/lib/fault-inject.c
@@ -101,6 +101,10 @@
bool should_fail(struct fault_attr *attr, ssize_t size)
{
+ /* No need to check any other properties if the probability is 0 */
+ if (attr->probability == 0)
+ return false;
+
if (attr->task_filter && !fail_task(attr, current))
return false;
diff --git a/lib/list_debug.c b/lib/list_debug.c
index 23a5e03..c24c2f7 100644
--- a/lib/list_debug.c
+++ b/lib/list_debug.c
@@ -87,12 +87,10 @@
struct list_head *prev, struct list_head *next)
{
WARN(next->prev != prev,
- "list_add_rcu corruption. next->prev should be "
- "prev (%p), but was %p. (next=%p).\n",
+ "list_add_rcu corruption. next->prev should be prev (%p), but was %p. (next=%p).\n",
prev, next->prev, next);
WARN(prev->next != next,
- "list_add_rcu corruption. prev->next should be "
- "next (%p), but was %p. (prev=%p).\n",
+ "list_add_rcu corruption. prev->next should be next (%p), but was %p. (prev=%p).\n",
next, prev->next, prev);
new->next = next;
new->prev = prev;
diff --git a/lib/mpi/Makefile b/lib/mpi/Makefile
index 567d52e..45ca90a 100644
--- a/lib/mpi/Makefile
+++ b/lib/mpi/Makefile
@@ -19,14 +19,3 @@
mpih-mul.o \
mpi-pow.o \
mpiutil.o
-
-mpi-$(CONFIG_MPILIB_EXTRA) += \
- mpi-add.o \
- mpi-div.o \
- mpi-cmp.o \
- mpi-gcd.o \
- mpi-inline.o \
- mpi-inv.o \
- mpi-mpow.o \
- mpi-mul.o \
- mpi-scan.o
diff --git a/lib/mpi/generic_mpi-asm-defs.h b/lib/mpi/generic_mpi-asm-defs.h
deleted file mode 100644
index 047d1f5..0000000
--- a/lib/mpi/generic_mpi-asm-defs.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* This file defines some basic constants for the MPI machinery. We
- * need to define the types on a per-CPU basis, so it is done with
- * this file here. */
-#define BYTES_PER_MPI_LIMB (SIZEOF_UNSIGNED_LONG)
diff --git a/lib/mpi/mpi-add.c b/lib/mpi/mpi-add.c
deleted file mode 100644
index f56b9ba..0000000
--- a/lib/mpi/mpi-add.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/* mpi-add.c - MPI functions
- * Copyright (C) 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
- * Copyright (C) 1994, 1996 Free Software Foundation, Inc.
- *
- * This file is part of GnuPG.
- *
- * GnuPG is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * GnuPG is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * Note: This code is heavily based on the GNU MP Library.
- * Actually it's the same code with only minor changes in the
- * way the data is stored; this is to support the abstraction
- * of an optional secure memory allocation which may be used
- * to avoid revealing of sensitive data due to paging etc.
- * The GNU MP Library itself is published under the LGPL;
- * however I decided to publish this code under the plain GPL.
- */
-
-#include "mpi-internal.h"
-
-/****************
- * Add the unsigned integer V to the mpi-integer U and store the
- * result in W. U and V may be the same.
- */
-int mpi_add_ui(MPI w, const MPI u, unsigned long v)
-{
- mpi_ptr_t wp, up;
- mpi_size_t usize, wsize;
- int usign, wsign;
-
- usize = u->nlimbs;
- usign = u->sign;
- wsign = 0;
-
- /* If not space for W (and possible carry), increase space. */
- wsize = usize + 1;
- if (w->alloced < wsize)
- if (mpi_resize(w, wsize) < 0)
- return -ENOMEM;
-
- /* These must be after realloc (U may be the same as W). */
- up = u->d;
- wp = w->d;
-
- if (!usize) { /* simple */
- wp[0] = v;
- wsize = v ? 1 : 0;
- } else if (!usign) { /* mpi is not negative */
- mpi_limb_t cy;
- cy = mpihelp_add_1(wp, up, usize, v);
- wp[usize] = cy;
- wsize = usize + cy;
- } else { /* The signs are different. Need exact comparison to determine
- * which operand to subtract from which. */
- if (usize == 1 && up[0] < v) {
- wp[0] = v - up[0];
- wsize = 1;
- } else {
- mpihelp_sub_1(wp, up, usize, v);
- /* Size can decrease with at most one limb. */
- wsize = usize - (wp[usize - 1] == 0);
- wsign = 1;
- }
- }
-
- w->nlimbs = wsize;
- w->sign = wsign;
- return 0;
-}
-
-int mpi_add(MPI w, MPI u, MPI v)
-{
- mpi_ptr_t wp, up, vp;
- mpi_size_t usize, vsize, wsize;
- int usign, vsign, wsign;
-
- if (u->nlimbs < v->nlimbs) { /* Swap U and V. */
- usize = v->nlimbs;
- usign = v->sign;
- vsize = u->nlimbs;
- vsign = u->sign;
- wsize = usize + 1;
- if (RESIZE_IF_NEEDED(w, wsize) < 0)
- return -ENOMEM;
- /* These must be after realloc (u or v may be the same as w). */
- up = v->d;
- vp = u->d;
- } else {
- usize = u->nlimbs;
- usign = u->sign;
- vsize = v->nlimbs;
- vsign = v->sign;
- wsize = usize + 1;
- if (RESIZE_IF_NEEDED(w, wsize) < 0)
- return -ENOMEM;
- /* These must be after realloc (u or v may be the same as w). */
- up = u->d;
- vp = v->d;
- }
- wp = w->d;
- wsign = 0;
-
- if (!vsize) { /* simple */
- MPN_COPY(wp, up, usize);
- wsize = usize;
- wsign = usign;
- } else if (usign != vsign) { /* different sign */
- /* This test is right since USIZE >= VSIZE */
- if (usize != vsize) {
- mpihelp_sub(wp, up, usize, vp, vsize);
- wsize = usize;
- MPN_NORMALIZE(wp, wsize);
- wsign = usign;
- } else if (mpihelp_cmp(up, vp, usize) < 0) {
- mpihelp_sub_n(wp, vp, up, usize);
- wsize = usize;
- MPN_NORMALIZE(wp, wsize);
- if (!usign)
- wsign = 1;
- } else {
- mpihelp_sub_n(wp, up, vp, usize);
- wsize = usize;
- MPN_NORMALIZE(wp, wsize);
- if (usign)
- wsign = 1;
- }
- } else { /* U and V have same sign. Add them. */
- mpi_limb_t cy = mpihelp_add(wp, up, usize, vp, vsize);
- wp[usize] = cy;
- wsize = usize + cy;
- if (usign)
- wsign = 1;
- }
-
- w->nlimbs = wsize;
- w->sign = wsign;
- return 0;
-}
-
-/****************
- * Subtract the unsigned integer V from the mpi-integer U and store the
- * result in W.
- */
-int mpi_sub_ui(MPI w, MPI u, unsigned long v)
-{
- mpi_ptr_t wp, up;
- mpi_size_t usize, wsize;
- int usign, wsign;
-
- usize = u->nlimbs;
- usign = u->sign;
- wsign = 0;
-
- /* If not space for W (and possible carry), increase space. */
- wsize = usize + 1;
- if (w->alloced < wsize)
- if (mpi_resize(w, wsize) < 0)
- return -ENOMEM;
-
- /* These must be after realloc (U may be the same as W). */
- up = u->d;
- wp = w->d;
-
- if (!usize) { /* simple */
- wp[0] = v;
- wsize = v ? 1 : 0;
- wsign = 1;
- } else if (usign) { /* mpi and v are negative */
- mpi_limb_t cy;
- cy = mpihelp_add_1(wp, up, usize, v);
- wp[usize] = cy;
- wsize = usize + cy;
- } else { /* The signs are different. Need exact comparison to determine
- * which operand to subtract from which. */
- if (usize == 1 && up[0] < v) {
- wp[0] = v - up[0];
- wsize = 1;
- wsign = 1;
- } else {
- mpihelp_sub_1(wp, up, usize, v);
- /* Size can decrease with at most one limb. */
- wsize = usize - (wp[usize - 1] == 0);
- }
- }
-
- w->nlimbs = wsize;
- w->sign = wsign;
- return 0;
-}
-
-int mpi_sub(MPI w, MPI u, MPI v)
-{
- int rc;
-
- if (w == v) {
- MPI vv;
- if (mpi_copy(&vv, v) < 0)
- return -ENOMEM;
- vv->sign = !vv->sign;
- rc = mpi_add(w, u, vv);
- mpi_free(vv);
- } else {
- /* fixme: this is not thread-save (we temp. modify v) */
- v->sign = !v->sign;
- rc = mpi_add(w, u, v);
- v->sign = !v->sign;
- }
- return rc;
-}
-
-int mpi_addm(MPI w, MPI u, MPI v, MPI m)
-{
- if (mpi_add(w, u, v) < 0 || mpi_fdiv_r(w, w, m) < 0)
- return -ENOMEM;
- return 0;
-}
-
-int mpi_subm(MPI w, MPI u, MPI v, MPI m)
-{
- if (mpi_sub(w, u, v) < 0 || mpi_fdiv_r(w, w, m) < 0)
- return -ENOMEM;
- return 0;
-}
diff --git a/lib/mpi/mpi-bit.c b/lib/mpi/mpi-bit.c
index 0c50536..5687248 100644
--- a/lib/mpi/mpi-bit.c
+++ b/lib/mpi/mpi-bit.c
@@ -54,165 +54,3 @@
return n;
}
EXPORT_SYMBOL_GPL(mpi_get_nbits);
-
-/****************
- * Test whether bit N is set.
- */
-int mpi_test_bit(MPI a, unsigned n)
-{
- unsigned limbno, bitno;
- mpi_limb_t limb;
-
- limbno = n / BITS_PER_MPI_LIMB;
- bitno = n % BITS_PER_MPI_LIMB;
-
- if (limbno >= a->nlimbs)
- return 0; /* too far left: this is a 0 */
- limb = a->d[limbno];
- return (limb & (A_LIMB_1 << bitno)) ? 1 : 0;
-}
-
-/****************
- * Set bit N of A.
- */
-int mpi_set_bit(MPI a, unsigned n)
-{
- unsigned limbno, bitno;
-
- limbno = n / BITS_PER_MPI_LIMB;
- bitno = n % BITS_PER_MPI_LIMB;
-
- if (limbno >= a->nlimbs) { /* resize */
- if (a->alloced >= limbno)
- if (mpi_resize(a, limbno + 1) < 0)
- return -ENOMEM;
- a->nlimbs = limbno + 1;
- }
- a->d[limbno] |= (A_LIMB_1 << bitno);
- return 0;
-}
-
-/****************
- * Set bit N of A. and clear all bits above
- */
-int mpi_set_highbit(MPI a, unsigned n)
-{
- unsigned limbno, bitno;
-
- limbno = n / BITS_PER_MPI_LIMB;
- bitno = n % BITS_PER_MPI_LIMB;
-
- if (limbno >= a->nlimbs) { /* resize */
- if (a->alloced >= limbno)
- if (mpi_resize(a, limbno + 1) < 0)
- return -ENOMEM;
- a->nlimbs = limbno + 1;
- }
- a->d[limbno] |= (A_LIMB_1 << bitno);
- for (bitno++; bitno < BITS_PER_MPI_LIMB; bitno++)
- a->d[limbno] &= ~(A_LIMB_1 << bitno);
- a->nlimbs = limbno + 1;
- return 0;
-}
-
-/****************
- * clear bit N of A and all bits above
- */
-void mpi_clear_highbit(MPI a, unsigned n)
-{
- unsigned limbno, bitno;
-
- limbno = n / BITS_PER_MPI_LIMB;
- bitno = n % BITS_PER_MPI_LIMB;
-
- if (limbno >= a->nlimbs)
- return; /* not allocated, so need to clear bits :-) */
-
- for (; bitno < BITS_PER_MPI_LIMB; bitno++)
- a->d[limbno] &= ~(A_LIMB_1 << bitno);
- a->nlimbs = limbno + 1;
-}
-
-/****************
- * Clear bit N of A.
- */
-void mpi_clear_bit(MPI a, unsigned n)
-{
- unsigned limbno, bitno;
-
- limbno = n / BITS_PER_MPI_LIMB;
- bitno = n % BITS_PER_MPI_LIMB;
-
- if (limbno >= a->nlimbs)
- return; /* don't need to clear this bit, it's to far to left */
- a->d[limbno] &= ~(A_LIMB_1 << bitno);
-}
-
-/****************
- * Shift A by N bits to the right
- * FIXME: should use alloc_limb if X and A are same.
- */
-int mpi_rshift(MPI x, MPI a, unsigned n)
-{
- mpi_ptr_t xp;
- mpi_size_t xsize;
-
- xsize = a->nlimbs;
- x->sign = a->sign;
- if (RESIZE_IF_NEEDED(x, (size_t) xsize) < 0)
- return -ENOMEM;
- xp = x->d;
-
- if (xsize) {
- mpihelp_rshift(xp, a->d, xsize, n);
- MPN_NORMALIZE(xp, xsize);
- }
- x->nlimbs = xsize;
- return 0;
-}
-
-/****************
- * Shift A by COUNT limbs to the left
- * This is used only within the MPI library
- */
-int mpi_lshift_limbs(MPI a, unsigned int count)
-{
- const int n = a->nlimbs;
- mpi_ptr_t ap;
- int i;
-
- if (!count || !n)
- return 0;
-
- if (RESIZE_IF_NEEDED(a, n + count) < 0)
- return -ENOMEM;
-
- ap = a->d;
- for (i = n - 1; i >= 0; i--)
- ap[i + count] = ap[i];
- for (i = 0; i < count; i++)
- ap[i] = 0;
- a->nlimbs += count;
- return 0;
-}
-
-/****************
- * Shift A by COUNT limbs to the right
- * This is used only within the MPI library
- */
-void mpi_rshift_limbs(MPI a, unsigned int count)
-{
- mpi_ptr_t ap = a->d;
- mpi_size_t n = a->nlimbs;
- unsigned int i;
-
- if (count >= n) {
- a->nlimbs = 0;
- return;
- }
-
- for (i = 0; i < n - count; i++)
- ap[i] = ap[i + count];
- ap[i] = 0;
- a->nlimbs -= count;
-}
diff --git a/lib/mpi/mpi-cmp.c b/lib/mpi/mpi-cmp.c
deleted file mode 100644
index 914bc42..0000000
--- a/lib/mpi/mpi-cmp.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* mpi-cmp.c - MPI functions
- * Copyright (C) 1998, 1999 Free Software Foundation, Inc.
- *
- * This file is part of GnuPG.
- *
- * GnuPG is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * GnuPG is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- */
-
-#include "mpi-internal.h"
-
-int mpi_cmp_ui(MPI u, unsigned long v)
-{
- mpi_limb_t limb = v;
-
- mpi_normalize(u);
- if (!u->nlimbs && !limb)
- return 0;
- if (u->sign)
- return -1;
- if (u->nlimbs > 1)
- return 1;
-
- if (u->d[0] == limb)
- return 0;
- else if (u->d[0] > limb)
- return 1;
- else
- return -1;
-}
-
-int mpi_cmp(MPI u, MPI v)
-{
- mpi_size_t usize, vsize;
- int cmp;
-
- mpi_normalize(u);
- mpi_normalize(v);
- usize = u->nlimbs;
- vsize = v->nlimbs;
- if (!u->sign && v->sign)
- return 1;
- if (u->sign && !v->sign)
- return -1;
- if (usize != vsize && !u->sign && !v->sign)
- return usize - vsize;
- if (usize != vsize && u->sign && v->sign)
- return vsize + usize;
- if (!usize)
- return 0;
- cmp = mpihelp_cmp(u->d, v->d, usize);
- if (!cmp)
- return 0;
- if ((cmp < 0 ? 1 : 0) == (u->sign ? 1 : 0))
- return 1;
- return -1;
-}
diff --git a/lib/mpi/mpi-div.c b/lib/mpi/mpi-div.c
deleted file mode 100644
index f68cbbb..0000000
--- a/lib/mpi/mpi-div.c
+++ /dev/null
@@ -1,338 +0,0 @@
-/* mpi-div.c - MPI functions
- * Copyright (C) 1994, 1996 Free Software Foundation, Inc.
- * Copyright (C) 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
- *
- * This file is part of GnuPG.
- *
- * GnuPG is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * GnuPG is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * Note: This code is heavily based on the GNU MP Library.
- * Actually it's the same code with only minor changes in the
- * way the data is stored; this is to support the abstraction
- * of an optional secure memory allocation which may be used
- * to avoid revealing of sensitive data due to paging etc.
- * The GNU MP Library itself is published under the LGPL;
- * however I decided to publish this code under the plain GPL.
- */
-
-#include <linux/string.h>
-#include "mpi-internal.h"
-#include "longlong.h"
-
-int mpi_fdiv_r(MPI rem, MPI dividend, MPI divisor)
-{
- int rc = -ENOMEM;
- int divisor_sign = divisor->sign;
- MPI temp_divisor = NULL;
-
- /* We need the original value of the divisor after the remainder has been
- * preliminary calculated. We have to copy it to temporary space if it's
- * the same variable as REM. */
- if (rem == divisor) {
- if (mpi_copy(&temp_divisor, divisor) < 0)
- goto nomem;
- divisor = temp_divisor;
- }
-
- if (mpi_tdiv_qr(NULL, rem, dividend, divisor) < 0)
- goto nomem;
- if (((divisor_sign ? 1 : 0) ^ (dividend->sign ? 1 : 0)) && rem->nlimbs)
- if (mpi_add(rem, rem, divisor) < 0)
- goto nomem;
-
- rc = 0;
-
-nomem:
- if (temp_divisor)
- mpi_free(temp_divisor);
- return rc;
-}
-
-/****************
- * Division rounding the quotient towards -infinity.
- * The remainder gets the same sign as the denominator.
- * rem is optional
- */
-
-ulong mpi_fdiv_r_ui(MPI rem, MPI dividend, ulong divisor)
-{
- mpi_limb_t rlimb;
-
- rlimb = mpihelp_mod_1(dividend->d, dividend->nlimbs, divisor);
- if (rlimb && dividend->sign)
- rlimb = divisor - rlimb;
-
- if (rem) {
- rem->d[0] = rlimb;
- rem->nlimbs = rlimb ? 1 : 0;
- }
- return rlimb;
-}
-
-int mpi_fdiv_q(MPI quot, MPI dividend, MPI divisor)
-{
- MPI tmp = mpi_alloc(mpi_get_nlimbs(quot));
- if (!tmp)
- return -ENOMEM;
- mpi_fdiv_qr(quot, tmp, dividend, divisor);
- mpi_free(tmp);
- return 0;
-}
-
-int mpi_fdiv_qr(MPI quot, MPI rem, MPI dividend, MPI divisor)
-{
- int divisor_sign = divisor->sign;
- MPI temp_divisor = NULL;
-
- if (quot == divisor || rem == divisor) {
- if (mpi_copy(&temp_divisor, divisor) < 0)
- return -ENOMEM;
- divisor = temp_divisor;
- }
-
- if (mpi_tdiv_qr(quot, rem, dividend, divisor) < 0)
- goto nomem;
-
- if ((divisor_sign ^ dividend->sign) && rem->nlimbs) {
- if (mpi_sub_ui(quot, quot, 1) < 0)
- goto nomem;
- if (mpi_add(rem, rem, divisor) < 0)
- goto nomem;
- }
-
- if (temp_divisor)
- mpi_free(temp_divisor);
-
- return 0;
-
-nomem:
- mpi_free(temp_divisor);
- return -ENOMEM;
-}
-
-/* If den == quot, den needs temporary storage.
- * If den == rem, den needs temporary storage.
- * If num == quot, num needs temporary storage.
- * If den has temporary storage, it can be normalized while being copied,
- * i.e no extra storage should be allocated.
- */
-
-int mpi_tdiv_r(MPI rem, MPI num, MPI den)
-{
- return mpi_tdiv_qr(NULL, rem, num, den);
-}
-
-int mpi_tdiv_qr(MPI quot, MPI rem, MPI num, MPI den)
-{
- int rc = -ENOMEM;
- mpi_ptr_t np, dp;
- mpi_ptr_t qp, rp;
- mpi_size_t nsize = num->nlimbs;
- mpi_size_t dsize = den->nlimbs;
- mpi_size_t qsize, rsize;
- mpi_size_t sign_remainder = num->sign;
- mpi_size_t sign_quotient = num->sign ^ den->sign;
- unsigned normalization_steps;
- mpi_limb_t q_limb;
- mpi_ptr_t marker[5];
- int markidx = 0;
-
- if (!dsize)
- return -EINVAL;
-
- memset(marker, 0, sizeof(marker));
-
- /* Ensure space is enough for quotient and remainder.
- * We need space for an extra limb in the remainder, because it's
- * up-shifted (normalized) below. */
- rsize = nsize + 1;
- if (mpi_resize(rem, rsize) < 0)
- goto nomem;
-
- qsize = rsize - dsize; /* qsize cannot be bigger than this. */
- if (qsize <= 0) {
- if (num != rem) {
- rem->nlimbs = num->nlimbs;
- rem->sign = num->sign;
- MPN_COPY(rem->d, num->d, nsize);
- }
- if (quot) {
- /* This needs to follow the assignment to rem, in case the
- * numerator and quotient are the same. */
- quot->nlimbs = 0;
- quot->sign = 0;
- }
- return 0;
- }
-
- if (quot)
- if (mpi_resize(quot, qsize) < 0)
- goto nomem;
-
- /* Read pointers here, when reallocation is finished. */
- np = num->d;
- dp = den->d;
- rp = rem->d;
-
- /* Optimize division by a single-limb divisor. */
- if (dsize == 1) {
- mpi_limb_t rlimb;
- if (quot) {
- qp = quot->d;
- rlimb = mpihelp_divmod_1(qp, np, nsize, dp[0]);
- qsize -= qp[qsize - 1] == 0;
- quot->nlimbs = qsize;
- quot->sign = sign_quotient;
- } else
- rlimb = mpihelp_mod_1(np, nsize, dp[0]);
- rp[0] = rlimb;
- rsize = rlimb != 0 ? 1 : 0;
- rem->nlimbs = rsize;
- rem->sign = sign_remainder;
- return 0;
- }
-
- if (quot) {
- qp = quot->d;
- /* Make sure QP and NP point to different objects. Otherwise the
- * numerator would be gradually overwritten by the quotient limbs. */
- if (qp == np) { /* Copy NP object to temporary space. */
- np = marker[markidx++] = mpi_alloc_limb_space(nsize);
- if (!np)
- goto nomem;
- MPN_COPY(np, qp, nsize);
- }
- } else /* Put quotient at top of remainder. */
- qp = rp + dsize;
-
- count_leading_zeros(normalization_steps, dp[dsize - 1]);
-
- /* Normalize the denominator, i.e. make its most significant bit set by
- * shifting it NORMALIZATION_STEPS bits to the left. Also shift the
- * numerator the same number of steps (to keep the quotient the same!).
- */
- if (normalization_steps) {
- mpi_ptr_t tp;
- mpi_limb_t nlimb;
-
- /* Shift up the denominator setting the most significant bit of
- * the most significant word. Use temporary storage not to clobber
- * the original contents of the denominator. */
- tp = marker[markidx++] = mpi_alloc_limb_space(dsize);
- if (!tp)
- goto nomem;
- mpihelp_lshift(tp, dp, dsize, normalization_steps);
- dp = tp;
-
- /* Shift up the numerator, possibly introducing a new most
- * significant word. Move the shifted numerator in the remainder
- * meanwhile. */
- nlimb = mpihelp_lshift(rp, np, nsize, normalization_steps);
- if (nlimb) {
- rp[nsize] = nlimb;
- rsize = nsize + 1;
- } else
- rsize = nsize;
- } else {
- /* The denominator is already normalized, as required. Copy it to
- * temporary space if it overlaps with the quotient or remainder. */
- if (dp == rp || (quot && (dp == qp))) {
- mpi_ptr_t tp;
-
- tp = marker[markidx++] = mpi_alloc_limb_space(dsize);
- if (!tp)
- goto nomem;
- MPN_COPY(tp, dp, dsize);
- dp = tp;
- }
-
- /* Move the numerator to the remainder. */
- if (rp != np)
- MPN_COPY(rp, np, nsize);
-
- rsize = nsize;
- }
-
- q_limb = mpihelp_divrem(qp, 0, rp, rsize, dp, dsize);
-
- if (quot) {
- qsize = rsize - dsize;
- if (q_limb) {
- qp[qsize] = q_limb;
- qsize += 1;
- }
-
- quot->nlimbs = qsize;
- quot->sign = sign_quotient;
- }
-
- rsize = dsize;
- MPN_NORMALIZE(rp, rsize);
-
- if (normalization_steps && rsize) {
- mpihelp_rshift(rp, rp, rsize, normalization_steps);
- rsize -= rp[rsize - 1] == 0 ? 1 : 0;
- }
-
- rem->nlimbs = rsize;
- rem->sign = sign_remainder;
-
- rc = 0;
-nomem:
- while (markidx)
- mpi_free_limb_space(marker[--markidx]);
- return rc;
-}
-
-int mpi_tdiv_q_2exp(MPI w, MPI u, unsigned count)
-{
- mpi_size_t usize, wsize;
- mpi_size_t limb_cnt;
-
- usize = u->nlimbs;
- limb_cnt = count / BITS_PER_MPI_LIMB;
- wsize = usize - limb_cnt;
- if (limb_cnt >= usize)
- w->nlimbs = 0;
- else {
- mpi_ptr_t wp;
- mpi_ptr_t up;
-
- if (RESIZE_IF_NEEDED(w, wsize) < 0)
- return -ENOMEM;
- wp = w->d;
- up = u->d;
-
- count %= BITS_PER_MPI_LIMB;
- if (count) {
- mpihelp_rshift(wp, up + limb_cnt, wsize, count);
- wsize -= !wp[wsize - 1];
- } else {
- MPN_COPY_INCR(wp, up + limb_cnt, wsize);
- }
-
- w->nlimbs = wsize;
- }
- return 0;
-}
-
-/****************
- * Check whether dividend is divisible by divisor
- * (note: divisor must fit into a limb)
- */
-int mpi_divisible_ui(MPI dividend, ulong divisor)
-{
- return !mpihelp_mod_1(dividend->d, dividend->nlimbs, divisor);
-}
diff --git a/lib/mpi/mpi-gcd.c b/lib/mpi/mpi-gcd.c
deleted file mode 100644
index 13c48ae..0000000
--- a/lib/mpi/mpi-gcd.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/* mpi-gcd.c - MPI functions
- * Copyright (C) 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
- *
- * This file is part of GnuPG.
- *
- * GnuPG is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * GnuPG is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- */
-
-#include "mpi-internal.h"
-
-/****************
- * Find the greatest common divisor G of A and B.
- * Return: true if this 1, false in all other cases
- */
-int mpi_gcd(MPI g, const MPI xa, const MPI xb)
-{
- MPI a = NULL, b = NULL;
-
- if (mpi_copy(&a, xa) < 0)
- goto nomem;
-
- if (mpi_copy(&b, xb) < 0)
- goto nomem;
-
- /* TAOCP Vol II, 4.5.2, Algorithm A */
- a->sign = 0;
- b->sign = 0;
- while (mpi_cmp_ui(b, 0)) {
- if (mpi_fdiv_r(g, a, b) < 0) /* g used as temorary variable */
- goto nomem;
- if (mpi_set(a, b) < 0)
- goto nomem;
- if (mpi_set(b, g) < 0)
- goto nomem;
- }
- if (mpi_set(g, a) < 0)
- goto nomem;
-
- mpi_free(a);
- mpi_free(b);
- return !mpi_cmp_ui(g, 1);
-
-nomem:
- mpi_free(a);
- mpi_free(b);
- return -ENOMEM;
-}
diff --git a/lib/mpi/mpi-inline.c b/lib/mpi/mpi-inline.c
deleted file mode 100644
index 654f68a..0000000
--- a/lib/mpi/mpi-inline.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* mpi-inline.c
- * Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc.
- *
- * This file is part of GnuPG.
- *
- * GnuPG is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * GnuPG is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- */
-
-/* put the inline functions as real functions into the lib */
-#define G10_MPI_INLINE_DECL
-
-#include "mpi-internal.h"
-
-/* always include the header becuase it is only
- * included by mpi-internal if __GCC__ is defined but we
- * need it here in all cases and the above definition of
- * of the macro allows us to do so
- */
-#include "mpi-inline.h"
diff --git a/lib/mpi/mpi-inv.c b/lib/mpi/mpi-inv.c
deleted file mode 100644
index 0951f98..0000000
--- a/lib/mpi/mpi-inv.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/* mpi-inv.c - MPI functions
- * Copyright (C) 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
- *
- * This file is part of GnuPG.
- *
- * GnuPG is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * GnuPG is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- */
-
-#include "mpi-internal.h"
-
-/****************
- * Calculate the multiplicative inverse X of A mod N
- * That is: Find the solution x for
- * 1 = (a*x) mod n
- */
-int mpi_invm(MPI x, const MPI a, const MPI n)
-{
- /* Extended Euclid's algorithm (See TAOPC Vol II, 4.5.2, Alg X)
- * modified according to Michael Penk's solution for Exercice 35
- * with further enhancement */
- MPI u = NULL, v = NULL;
- MPI u1 = NULL, u2 = NULL, u3 = NULL;
- MPI v1 = NULL, v2 = NULL, v3 = NULL;
- MPI t1 = NULL, t2 = NULL, t3 = NULL;
- unsigned k;
- int sign;
- int odd = 0;
- int rc = -ENOMEM;
-
- if (mpi_copy(&u, a) < 0)
- goto cleanup;
- if (mpi_copy(&v, n) < 0)
- goto cleanup;
-
- for (k = 0; !mpi_test_bit(u, 0) && !mpi_test_bit(v, 0); k++) {
- if (mpi_rshift(u, u, 1) < 0)
- goto cleanup;
- if (mpi_rshift(v, v, 1) < 0)
- goto cleanup;
- }
- odd = mpi_test_bit(v, 0);
-
- u1 = mpi_alloc_set_ui(1);
- if (!u1)
- goto cleanup;
- if (!odd) {
- u2 = mpi_alloc_set_ui(0);
- if (!u2)
- goto cleanup;
- }
- if (mpi_copy(&u3, u) < 0)
- goto cleanup;
- if (mpi_copy(&v1, v) < 0)
- goto cleanup;
- if (!odd) {
- v2 = mpi_alloc(mpi_get_nlimbs(u));
- if (!v2)
- goto cleanup;
- if (mpi_sub(v2, u1, u) < 0)
- goto cleanup; /* U is used as const 1 */
- }
- if (mpi_copy(&v3, v) < 0)
- goto cleanup;
- if (mpi_test_bit(u, 0)) { /* u is odd */
- t1 = mpi_alloc_set_ui(0);
- if (!t1)
- goto cleanup;
- if (!odd) {
- t2 = mpi_alloc_set_ui(1);
- if (!t2)
- goto cleanup;
- t2->sign = 1;
- }
- if (mpi_copy(&t3, v) < 0)
- goto cleanup;
- t3->sign = !t3->sign;
- goto Y4;
- } else {
- t1 = mpi_alloc_set_ui(1);
- if (!t1)
- goto cleanup;
- if (!odd) {
- t2 = mpi_alloc_set_ui(0);
- if (!t2)
- goto cleanup;
- }
- if (mpi_copy(&t3, u) < 0)
- goto cleanup;
- }
- do {
- do {
- if (!odd) {
- if (mpi_test_bit(t1, 0) || mpi_test_bit(t2, 0)) { /* one is odd */
- if (mpi_add(t1, t1, v) < 0)
- goto cleanup;
- if (mpi_sub(t2, t2, u) < 0)
- goto cleanup;
- }
- if (mpi_rshift(t1, t1, 1) < 0)
- goto cleanup;
- if (mpi_rshift(t2, t2, 1) < 0)
- goto cleanup;
- if (mpi_rshift(t3, t3, 1) < 0)
- goto cleanup;
- } else {
- if (mpi_test_bit(t1, 0))
- if (mpi_add(t1, t1, v) < 0)
- goto cleanup;
- if (mpi_rshift(t1, t1, 1) < 0)
- goto cleanup;
- if (mpi_rshift(t3, t3, 1) < 0)
- goto cleanup;
- }
-Y4:
- ;
- } while (!mpi_test_bit(t3, 0)); /* while t3 is even */
-
- if (!t3->sign) {
- if (mpi_set(u1, t1) < 0)
- goto cleanup;
- if (!odd)
- if (mpi_set(u2, t2) < 0)
- goto cleanup;
- if (mpi_set(u3, t3) < 0)
- goto cleanup;
- } else {
- if (mpi_sub(v1, v, t1) < 0)
- goto cleanup;
- sign = u->sign;
- u->sign = !u->sign;
- if (!odd)
- if (mpi_sub(v2, u, t2) < 0)
- goto cleanup;
- u->sign = sign;
- sign = t3->sign;
- t3->sign = !t3->sign;
- if (mpi_set(v3, t3) < 0)
- goto cleanup;
- t3->sign = sign;
- }
- if (mpi_sub(t1, u1, v1) < 0)
- goto cleanup;
- if (!odd)
- if (mpi_sub(t2, u2, v2) < 0)
- goto cleanup;
- if (mpi_sub(t3, u3, v3) < 0)
- goto cleanup;
- if (t1->sign) {
- if (mpi_add(t1, t1, v) < 0)
- goto cleanup;
- if (!odd)
- if (mpi_sub(t2, t2, u) < 0)
- goto cleanup;
- }
- } while (mpi_cmp_ui(t3, 0)); /* while t3 != 0 */
- /* mpi_lshift( u3, k ); */
- rc = mpi_set(x, u1);
-
-cleanup:
- mpi_free(u1);
- mpi_free(v1);
- mpi_free(t1);
- if (!odd) {
- mpi_free(u2);
- mpi_free(v2);
- mpi_free(t2);
- }
- mpi_free(u3);
- mpi_free(v3);
- mpi_free(t3);
-
- mpi_free(u);
- mpi_free(v);
- return rc;
-}
diff --git a/lib/mpi/mpi-mpow.c b/lib/mpi/mpi-mpow.c
deleted file mode 100644
index 7328d0d..0000000
--- a/lib/mpi/mpi-mpow.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/* mpi-mpow.c - MPI functions
- * Copyright (C) 1998, 1999, 2000 Free Software Foundation, Inc.
- *
- * This file is part of GnuPG.
- *
- * GnuPG is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * GnuPG is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- */
-
-#include "mpi-internal.h"
-#include "longlong.h"
-
-static int build_index(const MPI *exparray, int k, int i, int t)
-{
- int j, bitno;
- int index = 0;
-
- bitno = t - i;
- for (j = k - 1; j >= 0; j--) {
- index <<= 1;
- if (mpi_test_bit(exparray[j], bitno))
- index |= 1;
- }
- return index;
-}
-
-/****************
- * RES = (BASE[0] ^ EXP[0]) * (BASE[1] ^ EXP[1]) * ... * mod M
- */
-int mpi_mulpowm(MPI res, MPI *basearray, MPI *exparray, MPI m)
-{
- int rc = -ENOMEM;
- int k; /* number of elements */
- int t; /* bit size of largest exponent */
- int i, j, idx;
- MPI *G = NULL; /* table with precomputed values of size 2^k */
- MPI tmp = NULL;
-
- for (k = 0; basearray[k]; k++)
- ;
- if (!k) {
- pr_emerg("mpi_mulpowm: assert(k) failed\n");
- BUG();
- }
- for (t = 0, i = 0; (tmp = exparray[i]); i++) {
- j = mpi_get_nbits(tmp);
- if (j > t)
- t = j;
- }
- if (i != k) {
- pr_emerg("mpi_mulpowm: assert(i==k) failed\n");
- BUG();
- }
- if (!t) {
- pr_emerg("mpi_mulpowm: assert(t) failed\n");
- BUG();
- }
- if (k >= 10) {
- pr_emerg("mpi_mulpowm: assert(k<10) failed\n");
- BUG();
- }
-
- G = kzalloc((1 << k) * sizeof *G, GFP_KERNEL);
- if (!G)
- goto err_out;
-
- /* and calculate */
- tmp = mpi_alloc(mpi_get_nlimbs(m) + 1);
- if (!tmp)
- goto nomem;
- if (mpi_set_ui(res, 1) < 0)
- goto nomem;
- for (i = 1; i <= t; i++) {
- if (mpi_mulm(tmp, res, res, m) < 0)
- goto nomem;
- idx = build_index(exparray, k, i, t);
- if (!(idx >= 0 && idx < (1 << k))) {
- pr_emerg("mpi_mulpowm: assert(idx >= 0 && idx < (1<<k)) failed\n");
- BUG();
- }
- if (!G[idx]) {
- if (!idx) {
- G[0] = mpi_alloc_set_ui(1);
- if (!G[0])
- goto nomem;
- } else {
- for (j = 0; j < k; j++) {
- if ((idx & (1 << j))) {
- if (!G[idx]) {
- if (mpi_copy
- (&G[idx],
- basearray[j]) < 0)
- goto nomem;
- } else {
- if (mpi_mulm
- (G[idx], G[idx],
- basearray[j],
- m) < 0)
- goto nomem;
- }
- }
- }
- if (!G[idx]) {
- G[idx] = mpi_alloc(0);
- if (!G[idx])
- goto nomem;
- }
- }
- }
- if (mpi_mulm(res, tmp, G[idx], m) < 0)
- goto nomem;
- }
-
- rc = 0;
-nomem:
- /* cleanup */
- mpi_free(tmp);
- for (i = 0; i < (1 << k); i++)
- mpi_free(G[i]);
- kfree(G);
-err_out:
- return rc;
-}
diff --git a/lib/mpi/mpi-mul.c b/lib/mpi/mpi-mul.c
deleted file mode 100644
index 1f3219e..0000000
--- a/lib/mpi/mpi-mul.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/* mpi-mul.c - MPI functions
- * Copyright (C) 1994, 1996 Free Software Foundation, Inc.
- * Copyright (C) 1998, 2001 Free Software Foundation, Inc.
- *
- * This file is part of GnuPG.
- *
- * GnuPG is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * GnuPG is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * Note: This code is heavily based on the GNU MP Library.
- * Actually it's the same code with only minor changes in the
- * way the data is stored; this is to support the abstraction
- * of an optional secure memory allocation which may be used
- * to avoid revealing of sensitive data due to paging etc.
- * The GNU MP Library itself is published under the LGPL;
- * however I decided to publish this code under the plain GPL.
- */
-
-#include "mpi-internal.h"
-
-int mpi_mul_ui(MPI prod, MPI mult, unsigned long small_mult)
-{
- mpi_size_t size, prod_size;
- mpi_ptr_t prod_ptr;
- mpi_limb_t cy;
- int sign;
-
- size = mult->nlimbs;
- sign = mult->sign;
-
- if (!size || !small_mult) {
- prod->nlimbs = 0;
- prod->sign = 0;
- return 0;
- }
-
- prod_size = size + 1;
- if (prod->alloced < prod_size)
- if (mpi_resize(prod, prod_size) < 0)
- return -ENOMEM;
- prod_ptr = prod->d;
-
- cy = mpihelp_mul_1(prod_ptr, mult->d, size, (mpi_limb_t) small_mult);
- if (cy)
- prod_ptr[size++] = cy;
- prod->nlimbs = size;
- prod->sign = sign;
- return 0;
-}
-
-int mpi_mul_2exp(MPI w, MPI u, unsigned long cnt)
-{
- mpi_size_t usize, wsize, limb_cnt;
- mpi_ptr_t wp;
- mpi_limb_t wlimb;
- int usign, wsign;
-
- usize = u->nlimbs;
- usign = u->sign;
-
- if (!usize) {
- w->nlimbs = 0;
- w->sign = 0;
- return 0;
- }
-
- limb_cnt = cnt / BITS_PER_MPI_LIMB;
- wsize = usize + limb_cnt + 1;
- if (w->alloced < wsize)
- if (mpi_resize(w, wsize) < 0)
- return -ENOMEM;
- wp = w->d;
- wsize = usize + limb_cnt;
- wsign = usign;
-
- cnt %= BITS_PER_MPI_LIMB;
- if (cnt) {
- wlimb = mpihelp_lshift(wp + limb_cnt, u->d, usize, cnt);
- if (wlimb) {
- wp[wsize] = wlimb;
- wsize++;
- }
- } else {
- MPN_COPY_DECR(wp + limb_cnt, u->d, usize);
- }
-
- /* Zero all whole limbs at low end. Do it here and not before calling
- * mpn_lshift, not to lose for U == W. */
- MPN_ZERO(wp, limb_cnt);
-
- w->nlimbs = wsize;
- w->sign = wsign;
- return 0;
-}
-
-int mpi_mul(MPI w, MPI u, MPI v)
-{
- int rc = -ENOMEM;
- mpi_size_t usize, vsize, wsize;
- mpi_ptr_t up, vp, wp;
- mpi_limb_t cy;
- int usign, vsign, sign_product;
- int assign_wp = 0;
- mpi_ptr_t tmp_limb = NULL;
-
- if (u->nlimbs < v->nlimbs) { /* Swap U and V. */
- usize = v->nlimbs;
- usign = v->sign;
- up = v->d;
- vsize = u->nlimbs;
- vsign = u->sign;
- vp = u->d;
- } else {
- usize = u->nlimbs;
- usign = u->sign;
- up = u->d;
- vsize = v->nlimbs;
- vsign = v->sign;
- vp = v->d;
- }
- sign_product = usign ^ vsign;
- wp = w->d;
-
- /* Ensure W has space enough to store the result. */
- wsize = usize + vsize;
- if (w->alloced < (size_t) wsize) {
- if (wp == up || wp == vp) {
- wp = mpi_alloc_limb_space(wsize);
- if (!wp)
- goto nomem;
- assign_wp = 1;
- } else {
- if (mpi_resize(w, wsize) < 0)
- goto nomem;
- wp = w->d;
- }
- } else { /* Make U and V not overlap with W. */
- if (wp == up) {
- /* W and U are identical. Allocate temporary space for U. */
- up = tmp_limb = mpi_alloc_limb_space(usize);
- if (!up)
- goto nomem;
- /* Is V identical too? Keep it identical with U. */
- if (wp == vp)
- vp = up;
- /* Copy to the temporary space. */
- MPN_COPY(up, wp, usize);
- } else if (wp == vp) {
- /* W and V are identical. Allocate temporary space for V. */
- vp = tmp_limb = mpi_alloc_limb_space(vsize);
- if (!vp)
- goto nomem;
- /* Copy to the temporary space. */
- MPN_COPY(vp, wp, vsize);
- }
- }
-
- if (!vsize)
- wsize = 0;
- else {
- if (mpihelp_mul(wp, up, usize, vp, vsize, &cy) < 0)
- goto nomem;
- wsize -= cy ? 0 : 1;
- }
-
- if (assign_wp)
- mpi_assign_limb_space(w, wp, wsize);
-
- w->nlimbs = wsize;
- w->sign = sign_product;
- rc = 0;
-nomem:
- if (tmp_limb)
- mpi_free_limb_space(tmp_limb);
- return rc;
-}
-
-int mpi_mulm(MPI w, MPI u, MPI v, MPI m)
-{
- if (mpi_mul(w, u, v) < 0)
- return -ENOMEM;
- return mpi_fdiv_r(w, w, m);
-}
diff --git a/lib/mpi/mpi-scan.c b/lib/mpi/mpi-scan.c
deleted file mode 100644
index b2da5ad..0000000
--- a/lib/mpi/mpi-scan.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/* mpi-scan.c - MPI functions
- * Copyright (C) 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
- *
- * This file is part of GnuPG.
- *
- * GnuPG is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * GnuPG is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- */
-
-#include "mpi-internal.h"
-#include "longlong.h"
-
-/****************
- * Scan through an mpi and return byte for byte. a -1 is returned to indicate
- * the end of the mpi. Scanning is done from the lsb to the msb, returned
- * values are in the range of 0 .. 255.
- *
- * FIXME: This code is VERY ugly!
- */
-int mpi_getbyte(const MPI a, unsigned idx)
-{
- int i, j;
- unsigned n;
- mpi_ptr_t ap;
- mpi_limb_t limb;
-
- ap = a->d;
- for (n = 0, i = 0; i < a->nlimbs; i++) {
- limb = ap[i];
- for (j = 0; j < BYTES_PER_MPI_LIMB; j++, n++)
- if (n == idx)
- return (limb >> j * 8) & 0xff;
- }
- return -1;
-}
-
-/****************
- * Put a value at position IDX into A. idx counts from lsb to msb
- */
-void mpi_putbyte(MPI a, unsigned idx, int xc)
-{
- int i, j;
- unsigned n;
- mpi_ptr_t ap;
- mpi_limb_t limb, c;
-
- c = xc & 0xff;
- ap = a->d;
- for (n = 0, i = 0; i < a->alloced; i++) {
- limb = ap[i];
- for (j = 0; j < BYTES_PER_MPI_LIMB; j++, n++)
- if (n == idx) {
-#if BYTES_PER_MPI_LIMB == 4
- if (j == 0)
- limb = (limb & 0xffffff00) | c;
- else if (j == 1)
- limb = (limb & 0xffff00ff) | (c << 8);
- else if (j == 2)
- limb = (limb & 0xff00ffff) | (c << 16);
- else
- limb = (limb & 0x00ffffff) | (c << 24);
-#elif BYTES_PER_MPI_LIMB == 8
- if (j == 0)
- limb = (limb & 0xffffffffffffff00) | c;
- else if (j == 1)
- limb =
- (limb & 0xffffffffffff00ff) | (c <<
- 8);
- else if (j == 2)
- limb =
- (limb & 0xffffffffff00ffff) | (c <<
- 16);
- else if (j == 3)
- limb =
- (limb & 0xffffffff00ffffff) | (c <<
- 24);
- else if (j == 4)
- limb =
- (limb & 0xffffff00ffffffff) | (c <<
- 32);
- else if (j == 5)
- limb =
- (limb & 0xffff00ffffffffff) | (c <<
- 40);
- else if (j == 6)
- limb =
- (limb & 0xff00ffffffffffff) | (c <<
- 48);
- else
- limb =
- (limb & 0x00ffffffffffffff) | (c <<
- 56);
-#else
-#error please enhance this function, its ugly - i know.
-#endif
- if (a->nlimbs <= i)
- a->nlimbs = i + 1;
- ap[i] = limb;
- return;
- }
- }
- log_bug("index out of range\n");
-}
-
-/****************
- * Count the number of zerobits at the low end of A
- */
-unsigned mpi_trailing_zeros(const MPI a)
-{
- unsigned n, count = 0;
-
- for (n = 0; n < a->nlimbs; n++) {
- if (a->d[n]) {
- unsigned nn;
- mpi_limb_t alimb = a->d[n];
-
- count_trailing_zeros(nn, alimb);
- count += nn;
- break;
- }
- count += BITS_PER_MPI_LIMB;
- }
- return count;
-
-}
diff --git a/lib/mpi/mpicoder.c b/lib/mpi/mpicoder.c
index f26b41f..f0fa659 100644
--- a/lib/mpi/mpicoder.c
+++ b/lib/mpi/mpicoder.c
@@ -74,81 +74,6 @@
EXPORT_SYMBOL_GPL(mpi_read_from_buffer);
/****************
- * Make an mpi from a character string.
- */
-int mpi_fromstr(MPI val, const char *str)
-{
- int hexmode = 0, sign = 0, prepend_zero = 0, i, j, c, c1, c2;
- unsigned nbits, nbytes, nlimbs;
- mpi_limb_t a;
-
- if (*str == '-') {
- sign = 1;
- str++;
- }
- if (*str == '0' && str[1] == 'x')
- hexmode = 1;
- else
- return -EINVAL; /* other bases are not yet supported */
- str += 2;
-
- nbits = strlen(str) * 4;
- if (nbits % 8)
- prepend_zero = 1;
- nbytes = (nbits + 7) / 8;
- nlimbs = (nbytes + BYTES_PER_MPI_LIMB - 1) / BYTES_PER_MPI_LIMB;
- if (val->alloced < nlimbs)
- if (!mpi_resize(val, nlimbs))
- return -ENOMEM;
- i = BYTES_PER_MPI_LIMB - nbytes % BYTES_PER_MPI_LIMB;
- i %= BYTES_PER_MPI_LIMB;
- j = val->nlimbs = nlimbs;
- val->sign = sign;
- for (; j > 0; j--) {
- a = 0;
- for (; i < BYTES_PER_MPI_LIMB; i++) {
- if (prepend_zero) {
- c1 = '0';
- prepend_zero = 0;
- } else
- c1 = *str++;
- assert(c1);
- c2 = *str++;
- assert(c2);
- if (c1 >= '0' && c1 <= '9')
- c = c1 - '0';
- else if (c1 >= 'a' && c1 <= 'f')
- c = c1 - 'a' + 10;
- else if (c1 >= 'A' && c1 <= 'F')
- c = c1 - 'A' + 10;
- else {
- mpi_clear(val);
- return 1;
- }
- c <<= 4;
- if (c2 >= '0' && c2 <= '9')
- c |= c2 - '0';
- else if (c2 >= 'a' && c2 <= 'f')
- c |= c2 - 'a' + 10;
- else if (c2 >= 'A' && c2 <= 'F')
- c |= c2 - 'A' + 10;
- else {
- mpi_clear(val);
- return 1;
- }
- a <<= 8;
- a |= c;
- }
- i = 0;
-
- val->d[j - 1] = a;
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(mpi_fromstr);
-
-/****************
* Return an allocated buffer with the MPI (msb first).
* NBYTES receives the length of this buffer. Caller must free the
* return string (This function does return a 0 byte buffer with NBYTES
diff --git a/lib/mpi/mpih-div.c b/lib/mpi/mpih-div.c
index cde1aae..c57d1d4 100644
--- a/lib/mpi/mpih-div.c
+++ b/lib/mpi/mpih-div.c
@@ -37,159 +37,6 @@
#define UDIV_TIME UMUL_TIME
#endif
-/* FIXME: We should be using invert_limb (or invert_normalized_limb)
- * here (not udiv_qrnnd).
- */
-
-mpi_limb_t
-mpihelp_mod_1(mpi_ptr_t dividend_ptr, mpi_size_t dividend_size,
- mpi_limb_t divisor_limb)
-{
- mpi_size_t i;
- mpi_limb_t n1, n0, r;
- int dummy;
-
- /* Botch: Should this be handled at all? Rely on callers? */
- if (!dividend_size)
- return 0;
-
- /* If multiplication is much faster than division, and the
- * dividend is large, pre-invert the divisor, and use
- * only multiplications in the inner loop.
- *
- * This test should be read:
- * Does it ever help to use udiv_qrnnd_preinv?
- * && Does what we save compensate for the inversion overhead?
- */
- if (UDIV_TIME > (2 * UMUL_TIME + 6)
- && (UDIV_TIME - (2 * UMUL_TIME + 6)) * dividend_size > UDIV_TIME) {
- int normalization_steps;
-
- count_leading_zeros(normalization_steps, divisor_limb);
- if (normalization_steps) {
- mpi_limb_t divisor_limb_inverted;
-
- divisor_limb <<= normalization_steps;
-
- /* Compute (2**2N - 2**N * DIVISOR_LIMB) / DIVISOR_LIMB. The
- * result is a (N+1)-bit approximation to 1/DIVISOR_LIMB, with the
- * most significant bit (with weight 2**N) implicit.
- *
- * Special case for DIVISOR_LIMB == 100...000.
- */
- if (!(divisor_limb << 1))
- divisor_limb_inverted = ~(mpi_limb_t) 0;
- else
- udiv_qrnnd(divisor_limb_inverted, dummy,
- -divisor_limb, 0, divisor_limb);
-
- n1 = dividend_ptr[dividend_size - 1];
- r = n1 >> (BITS_PER_MPI_LIMB - normalization_steps);
-
- /* Possible optimization:
- * if (r == 0
- * && divisor_limb > ((n1 << normalization_steps)
- * | (dividend_ptr[dividend_size - 2] >> ...)))
- * ...one division less...
- */
- for (i = dividend_size - 2; i >= 0; i--) {
- n0 = dividend_ptr[i];
- UDIV_QRNND_PREINV(dummy, r, r,
- ((n1 << normalization_steps)
- | (n0 >>
- (BITS_PER_MPI_LIMB -
- normalization_steps))),
- divisor_limb,
- divisor_limb_inverted);
- n1 = n0;
- }
- UDIV_QRNND_PREINV(dummy, r, r,
- n1 << normalization_steps,
- divisor_limb, divisor_limb_inverted);
- return r >> normalization_steps;
- } else {
- mpi_limb_t divisor_limb_inverted;
-
- /* Compute (2**2N - 2**N * DIVISOR_LIMB) / DIVISOR_LIMB. The
- * result is a (N+1)-bit approximation to 1/DIVISOR_LIMB, with the
- * most significant bit (with weight 2**N) implicit.
- *
- * Special case for DIVISOR_LIMB == 100...000.
- */
- if (!(divisor_limb << 1))
- divisor_limb_inverted = ~(mpi_limb_t) 0;
- else
- udiv_qrnnd(divisor_limb_inverted, dummy,
- -divisor_limb, 0, divisor_limb);
-
- i = dividend_size - 1;
- r = dividend_ptr[i];
-
- if (r >= divisor_limb)
- r = 0;
- else
- i--;
-
- for (; i >= 0; i--) {
- n0 = dividend_ptr[i];
- UDIV_QRNND_PREINV(dummy, r, r,
- n0, divisor_limb,
- divisor_limb_inverted);
- }
- return r;
- }
- } else {
- if (UDIV_NEEDS_NORMALIZATION) {
- int normalization_steps;
-
- count_leading_zeros(normalization_steps, divisor_limb);
- if (normalization_steps) {
- divisor_limb <<= normalization_steps;
-
- n1 = dividend_ptr[dividend_size - 1];
- r = n1 >> (BITS_PER_MPI_LIMB -
- normalization_steps);
-
- /* Possible optimization:
- * if (r == 0
- * && divisor_limb > ((n1 << normalization_steps)
- * | (dividend_ptr[dividend_size - 2] >> ...)))
- * ...one division less...
- */
- for (i = dividend_size - 2; i >= 0; i--) {
- n0 = dividend_ptr[i];
- udiv_qrnnd(dummy, r, r,
- ((n1 << normalization_steps)
- | (n0 >>
- (BITS_PER_MPI_LIMB -
- normalization_steps))),
- divisor_limb);
- n1 = n0;
- }
- udiv_qrnnd(dummy, r, r,
- n1 << normalization_steps,
- divisor_limb);
- return r >> normalization_steps;
- }
- }
- /* No normalization needed, either because udiv_qrnnd doesn't require
- * it, or because DIVISOR_LIMB is already normalized. */
- i = dividend_size - 1;
- r = dividend_ptr[i];
-
- if (r >= divisor_limb)
- r = 0;
- else
- i--;
-
- for (; i >= 0; i--) {
- n0 = dividend_ptr[i];
- udiv_qrnnd(dummy, r, r, n0, divisor_limb);
- }
- return r;
- }
-}
-
/* Divide num (NP/NSIZE) by den (DP/DSIZE) and write
* the NSIZE-DSIZE least significant quotient limbs at QP
* and the DSIZE long remainder at NP. If QEXTRA_LIMBS is
@@ -387,159 +234,3 @@
return most_significant_q_limb;
}
-
-/****************
- * Divide (DIVIDEND_PTR,,DIVIDEND_SIZE) by DIVISOR_LIMB.
- * Write DIVIDEND_SIZE limbs of quotient at QUOT_PTR.
- * Return the single-limb remainder.
- * There are no constraints on the value of the divisor.
- *
- * QUOT_PTR and DIVIDEND_PTR might point to the same limb.
- */
-
-mpi_limb_t
-mpihelp_divmod_1(mpi_ptr_t quot_ptr,
- mpi_ptr_t dividend_ptr, mpi_size_t dividend_size,
- mpi_limb_t divisor_limb)
-{
- mpi_size_t i;
- mpi_limb_t n1, n0, r;
- int dummy;
-
- if (!dividend_size)
- return 0;
-
- /* If multiplication is much faster than division, and the
- * dividend is large, pre-invert the divisor, and use
- * only multiplications in the inner loop.
- *
- * This test should be read:
- * Does it ever help to use udiv_qrnnd_preinv?
- * && Does what we save compensate for the inversion overhead?
- */
- if (UDIV_TIME > (2 * UMUL_TIME + 6)
- && (UDIV_TIME - (2 * UMUL_TIME + 6)) * dividend_size > UDIV_TIME) {
- int normalization_steps;
-
- count_leading_zeros(normalization_steps, divisor_limb);
- if (normalization_steps) {
- mpi_limb_t divisor_limb_inverted;
-
- divisor_limb <<= normalization_steps;
-
- /* Compute (2**2N - 2**N * DIVISOR_LIMB) / DIVISOR_LIMB. The
- * result is a (N+1)-bit approximation to 1/DIVISOR_LIMB, with the
- * most significant bit (with weight 2**N) implicit.
- */
- /* Special case for DIVISOR_LIMB == 100...000. */
- if (!(divisor_limb << 1))
- divisor_limb_inverted = ~(mpi_limb_t) 0;
- else
- udiv_qrnnd(divisor_limb_inverted, dummy,
- -divisor_limb, 0, divisor_limb);
-
- n1 = dividend_ptr[dividend_size - 1];
- r = n1 >> (BITS_PER_MPI_LIMB - normalization_steps);
-
- /* Possible optimization:
- * if (r == 0
- * && divisor_limb > ((n1 << normalization_steps)
- * | (dividend_ptr[dividend_size - 2] >> ...)))
- * ...one division less...
- */
- for (i = dividend_size - 2; i >= 0; i--) {
- n0 = dividend_ptr[i];
- UDIV_QRNND_PREINV(quot_ptr[i + 1], r, r,
- ((n1 << normalization_steps)
- | (n0 >>
- (BITS_PER_MPI_LIMB -
- normalization_steps))),
- divisor_limb,
- divisor_limb_inverted);
- n1 = n0;
- }
- UDIV_QRNND_PREINV(quot_ptr[0], r, r,
- n1 << normalization_steps,
- divisor_limb, divisor_limb_inverted);
- return r >> normalization_steps;
- } else {
- mpi_limb_t divisor_limb_inverted;
-
- /* Compute (2**2N - 2**N * DIVISOR_LIMB) / DIVISOR_LIMB. The
- * result is a (N+1)-bit approximation to 1/DIVISOR_LIMB, with the
- * most significant bit (with weight 2**N) implicit.
- */
- /* Special case for DIVISOR_LIMB == 100...000. */
- if (!(divisor_limb << 1))
- divisor_limb_inverted = ~(mpi_limb_t) 0;
- else
- udiv_qrnnd(divisor_limb_inverted, dummy,
- -divisor_limb, 0, divisor_limb);
-
- i = dividend_size - 1;
- r = dividend_ptr[i];
-
- if (r >= divisor_limb)
- r = 0;
- else
- quot_ptr[i--] = 0;
-
- for (; i >= 0; i--) {
- n0 = dividend_ptr[i];
- UDIV_QRNND_PREINV(quot_ptr[i], r, r,
- n0, divisor_limb,
- divisor_limb_inverted);
- }
- return r;
- }
- } else {
- if (UDIV_NEEDS_NORMALIZATION) {
- int normalization_steps;
-
- count_leading_zeros(normalization_steps, divisor_limb);
- if (normalization_steps) {
- divisor_limb <<= normalization_steps;
-
- n1 = dividend_ptr[dividend_size - 1];
- r = n1 >> (BITS_PER_MPI_LIMB -
- normalization_steps);
-
- /* Possible optimization:
- * if (r == 0
- * && divisor_limb > ((n1 << normalization_steps)
- * | (dividend_ptr[dividend_size - 2] >> ...)))
- * ...one division less...
- */
- for (i = dividend_size - 2; i >= 0; i--) {
- n0 = dividend_ptr[i];
- udiv_qrnnd(quot_ptr[i + 1], r, r,
- ((n1 << normalization_steps)
- | (n0 >>
- (BITS_PER_MPI_LIMB -
- normalization_steps))),
- divisor_limb);
- n1 = n0;
- }
- udiv_qrnnd(quot_ptr[0], r, r,
- n1 << normalization_steps,
- divisor_limb);
- return r >> normalization_steps;
- }
- }
- /* No normalization needed, either because udiv_qrnnd doesn't require
- * it, or because DIVISOR_LIMB is already normalized. */
- i = dividend_size - 1;
- r = dividend_ptr[i];
-
- if (r >= divisor_limb)
- r = 0;
- else
- quot_ptr[i--] = 0;
-
- for (; i >= 0; i--) {
- n0 = dividend_ptr[i];
- udiv_qrnnd(quot_ptr[i], r, r, n0, divisor_limb);
- }
- return r;
- }
-}
diff --git a/lib/mpi/mpih-mul.c b/lib/mpi/mpih-mul.c
index c69c5ee..7c84171 100644
--- a/lib/mpi/mpih-mul.c
+++ b/lib/mpi/mpih-mul.c
@@ -330,36 +330,6 @@
}
}
-/* This should be made into an inline function in gmp.h. */
-int mpihelp_mul_n(mpi_ptr_t prodp, mpi_ptr_t up, mpi_ptr_t vp, mpi_size_t size)
-{
- if (up == vp) {
- if (size < KARATSUBA_THRESHOLD)
- mpih_sqr_n_basecase(prodp, up, size);
- else {
- mpi_ptr_t tspace;
- tspace = mpi_alloc_limb_space(2 * size);
- if (!tspace)
- return -ENOMEM;
- mpih_sqr_n(prodp, up, size, tspace);
- mpi_free_limb_space(tspace);
- }
- } else {
- if (size < KARATSUBA_THRESHOLD)
- mul_n_basecase(prodp, up, vp, size);
- else {
- mpi_ptr_t tspace;
- tspace = mpi_alloc_limb_space(2 * size);
- if (!tspace)
- return -ENOMEM;
- mul_n(prodp, up, vp, size, tspace);
- mpi_free_limb_space(tspace);
- }
- }
-
- return 0;
-}
-
int
mpihelp_mul_karatsuba_case(mpi_ptr_t prodp,
mpi_ptr_t up, mpi_size_t usize,
diff --git a/lib/mpi/mpiutil.c b/lib/mpi/mpiutil.c
index 26e4ed3..657979f 100644
--- a/lib/mpi/mpiutil.c
+++ b/lib/mpi/mpiutil.c
@@ -106,13 +106,6 @@
return 0;
}
-void mpi_clear(MPI a)
-{
- a->nlimbs = 0;
- a->nbits = 0;
- a->flags = 0;
-}
-
void mpi_free(MPI a)
{
if (!a)
@@ -128,84 +121,3 @@
kfree(a);
}
EXPORT_SYMBOL_GPL(mpi_free);
-
-/****************
- * Note: This copy function should not interpret the MPI
- * but copy it transparently.
- */
-int mpi_copy(MPI *copied, const MPI a)
-{
- size_t i;
- MPI b;
-
- *copied = NULL;
-
- if (a) {
- b = mpi_alloc(a->nlimbs);
- if (!b)
- return -ENOMEM;
-
- b->nlimbs = a->nlimbs;
- b->sign = a->sign;
- b->flags = a->flags;
- b->nbits = a->nbits;
-
- for (i = 0; i < b->nlimbs; i++)
- b->d[i] = a->d[i];
-
- *copied = b;
- }
-
- return 0;
-}
-
-int mpi_set(MPI w, const MPI u)
-{
- mpi_ptr_t wp, up;
- mpi_size_t usize = u->nlimbs;
- int usign = u->sign;
-
- if (RESIZE_IF_NEEDED(w, (size_t) usize) < 0)
- return -ENOMEM;
-
- wp = w->d;
- up = u->d;
- MPN_COPY(wp, up, usize);
- w->nlimbs = usize;
- w->nbits = u->nbits;
- w->flags = u->flags;
- w->sign = usign;
- return 0;
-}
-
-int mpi_set_ui(MPI w, unsigned long u)
-{
- if (RESIZE_IF_NEEDED(w, 1) < 0)
- return -ENOMEM;
- w->d[0] = u;
- w->nlimbs = u ? 1 : 0;
- w->sign = 0;
- w->nbits = 0;
- w->flags = 0;
- return 0;
-}
-
-MPI mpi_alloc_set_ui(unsigned long u)
-{
- MPI w = mpi_alloc(1);
- if (!w)
- return w;
- w->d[0] = u;
- w->nlimbs = u ? 1 : 0;
- w->sign = 0;
- return w;
-}
-
-void mpi_swap(MPI a, MPI b)
-{
- struct gcry_mpi tmp;
-
- tmp = *a;
- *a = *b;
- *b = tmp;
-}
diff --git a/lib/spinlock_debug.c b/lib/spinlock_debug.c
index d0ec4f3..e91fbc2 100644
--- a/lib/spinlock_debug.c
+++ b/lib/spinlock_debug.c
@@ -118,7 +118,7 @@
/* lockup suspected: */
if (print_once) {
print_once = 0;
- spin_dump(lock, "lockup");
+ spin_dump(lock, "lockup suspected");
#ifdef CONFIG_SMP
trigger_all_cpu_backtrace();
#endif
diff --git a/mm/bootmem.c b/mm/bootmem.c
index ec4fcb7..bcb63ac 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -698,7 +698,7 @@
return ___alloc_bootmem(size, align, goal, limit);
}
-static void * __init ___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
+void * __init ___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
unsigned long size, unsigned long align,
unsigned long goal, unsigned long limit)
{
@@ -710,6 +710,10 @@
if (ptr)
return ptr;
+ /* do not panic in alloc_bootmem_bdata() */
+ if (limit && goal + size > limit)
+ limit = 0;
+
ptr = alloc_bootmem_bdata(pgdat->bdata, size, align, goal, limit);
if (ptr)
return ptr;
diff --git a/mm/compaction.c b/mm/compaction.c
index 7ea259d..2f42d95 100644
--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -701,8 +701,11 @@
if (err) {
putback_lru_pages(&cc->migratepages);
cc->nr_migratepages = 0;
+ if (err == -ENOMEM) {
+ ret = COMPACT_PARTIAL;
+ goto out;
+ }
}
-
}
out:
diff --git a/mm/madvise.c b/mm/madvise.c
index deff1b6..14d260f 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -15,6 +15,7 @@
#include <linux/sched.h>
#include <linux/ksm.h>
#include <linux/fs.h>
+#include <linux/file.h>
/*
* Any behaviour which results in changes to the vma->vm_flags needs to
@@ -204,14 +205,16 @@
{
loff_t offset;
int error;
+ struct file *f;
*prev = NULL; /* tell sys_madvise we drop mmap_sem */
if (vma->vm_flags & (VM_LOCKED|VM_NONLINEAR|VM_HUGETLB))
return -EINVAL;
- if (!vma->vm_file || !vma->vm_file->f_mapping
- || !vma->vm_file->f_mapping->host) {
+ f = vma->vm_file;
+
+ if (!f || !f->f_mapping || !f->f_mapping->host) {
return -EINVAL;
}
@@ -221,11 +224,18 @@
offset = (loff_t)(start - vma->vm_start)
+ ((loff_t)vma->vm_pgoff << PAGE_SHIFT);
- /* filesystem's fallocate may need to take i_mutex */
+ /*
+ * Filesystem's fallocate may need to take i_mutex. We need to
+ * explicitly grab a reference because the vma (and hence the
+ * vma's reference to the file) can go away as soon as we drop
+ * mmap_sem.
+ */
+ get_file(f);
up_read(¤t->mm->mmap_sem);
- error = do_fallocate(vma->vm_file,
+ error = do_fallocate(f,
FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
offset, end - start);
+ fput(f);
down_read(¤t->mm->mmap_sem);
return error;
}
diff --git a/mm/memblock.c b/mm/memblock.c
index 952123e..5cc6731 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -143,30 +143,6 @@
MAX_NUMNODES);
}
-/*
- * Free memblock.reserved.regions
- */
-int __init_memblock memblock_free_reserved_regions(void)
-{
- if (memblock.reserved.regions == memblock_reserved_init_regions)
- return 0;
-
- return memblock_free(__pa(memblock.reserved.regions),
- sizeof(struct memblock_region) * memblock.reserved.max);
-}
-
-/*
- * Reserve memblock.reserved.regions
- */
-int __init_memblock memblock_reserve_reserved_regions(void)
-{
- if (memblock.reserved.regions == memblock_reserved_init_regions)
- return 0;
-
- return memblock_reserve(__pa(memblock.reserved.regions),
- sizeof(struct memblock_region) * memblock.reserved.max);
-}
-
static void __init_memblock memblock_remove_region(struct memblock_type *type, unsigned long r)
{
type->total_size -= type->regions[r].size;
@@ -184,9 +160,39 @@
}
}
-static int __init_memblock memblock_double_array(struct memblock_type *type)
+phys_addr_t __init_memblock get_allocated_memblock_reserved_regions_info(
+ phys_addr_t *addr)
+{
+ if (memblock.reserved.regions == memblock_reserved_init_regions)
+ return 0;
+
+ *addr = __pa(memblock.reserved.regions);
+
+ return PAGE_ALIGN(sizeof(struct memblock_region) *
+ memblock.reserved.max);
+}
+
+/**
+ * memblock_double_array - double the size of the memblock regions array
+ * @type: memblock type of the regions array being doubled
+ * @new_area_start: starting address of memory range to avoid overlap with
+ * @new_area_size: size of memory range to avoid overlap with
+ *
+ * Double the size of the @type regions array. If memblock is being used to
+ * allocate memory for a new reserved regions array and there is a previously
+ * allocated memory range [@new_area_start,@new_area_start+@new_area_size]
+ * waiting to be reserved, ensure the memory used by the new array does
+ * not overlap.
+ *
+ * RETURNS:
+ * 0 on success, -1 on failure.
+ */
+static int __init_memblock memblock_double_array(struct memblock_type *type,
+ phys_addr_t new_area_start,
+ phys_addr_t new_area_size)
{
struct memblock_region *new_array, *old_array;
+ phys_addr_t old_alloc_size, new_alloc_size;
phys_addr_t old_size, new_size, addr;
int use_slab = slab_is_available();
int *in_slab;
@@ -200,6 +206,12 @@
/* Calculate new doubled size */
old_size = type->max * sizeof(struct memblock_region);
new_size = old_size << 1;
+ /*
+ * We need to allocated new one align to PAGE_SIZE,
+ * so we can free them completely later.
+ */
+ old_alloc_size = PAGE_ALIGN(old_size);
+ new_alloc_size = PAGE_ALIGN(new_size);
/* Retrieve the slab flag */
if (type == &memblock.memory)
@@ -222,7 +234,18 @@
new_array = kmalloc(new_size, GFP_KERNEL);
addr = new_array ? __pa(new_array) : 0;
} else {
- addr = memblock_find_in_range(0, MEMBLOCK_ALLOC_ACCESSIBLE, new_size, sizeof(phys_addr_t));
+ /* only exclude range when trying to double reserved.regions */
+ if (type != &memblock.reserved)
+ new_area_start = new_area_size = 0;
+
+ addr = memblock_find_in_range(new_area_start + new_area_size,
+ memblock.current_limit,
+ new_alloc_size, PAGE_SIZE);
+ if (!addr && new_area_size)
+ addr = memblock_find_in_range(0,
+ min(new_area_start, memblock.current_limit),
+ new_alloc_size, PAGE_SIZE);
+
new_array = addr ? __va(addr) : 0;
}
if (!addr) {
@@ -251,13 +274,13 @@
kfree(old_array);
else if (old_array != memblock_memory_init_regions &&
old_array != memblock_reserved_init_regions)
- memblock_free(__pa(old_array), old_size);
+ memblock_free(__pa(old_array), old_alloc_size);
/* Reserve the new array if that comes from the memblock.
* Otherwise, we needn't do it
*/
if (!use_slab)
- BUG_ON(memblock_reserve(addr, new_size));
+ BUG_ON(memblock_reserve(addr, new_alloc_size));
/* Update slab flag */
*in_slab = use_slab;
@@ -399,7 +422,7 @@
*/
if (!insert) {
while (type->cnt + nr_new > type->max)
- if (memblock_double_array(type) < 0)
+ if (memblock_double_array(type, obase, size) < 0)
return -ENOMEM;
insert = true;
goto repeat;
@@ -450,7 +473,7 @@
/* we'll create at most two more regions */
while (type->cnt + 2 > type->max)
- if (memblock_double_array(type) < 0)
+ if (memblock_double_array(type, base, size) < 0)
return -ENOMEM;
for (i = 0; i < type->cnt; i++) {
@@ -540,9 +563,9 @@
* __next_free_mem_range - next function for for_each_free_mem_range()
* @idx: pointer to u64 loop variable
* @nid: nid: node selector, %MAX_NUMNODES for all nodes
- * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
- * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
- * @p_nid: ptr to int for nid of the range, can be %NULL
+ * @out_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @out_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @out_nid: ptr to int for nid of the range, can be %NULL
*
* Find the first free area from *@idx which matches @nid, fill the out
* parameters, and update *@idx for the next iteration. The lower 32bit of
@@ -616,9 +639,9 @@
* __next_free_mem_range_rev - next function for for_each_free_mem_range_reverse()
* @idx: pointer to u64 loop variable
* @nid: nid: node selector, %MAX_NUMNODES for all nodes
- * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
- * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
- * @p_nid: ptr to int for nid of the range, can be %NULL
+ * @out_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @out_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @out_nid: ptr to int for nid of the range, can be %NULL
*
* Reverse of __next_free_mem_range().
*/
@@ -867,6 +890,16 @@
return memblock_search(&memblock.memory, addr) != -1;
}
+/**
+ * memblock_is_region_memory - check if a region is a subset of memory
+ * @base: base of region to check
+ * @size: size of region to check
+ *
+ * Check if the region [@base, @base+@size) is a subset of a memory block.
+ *
+ * RETURNS:
+ * 0 if false, non-zero if true
+ */
int __init_memblock memblock_is_region_memory(phys_addr_t base, phys_addr_t size)
{
int idx = memblock_search(&memblock.memory, base);
@@ -879,6 +912,16 @@
memblock.memory.regions[idx].size) >= end;
}
+/**
+ * memblock_is_region_reserved - check if a region intersects reserved memory
+ * @base: base of region to check
+ * @size: size of region to check
+ *
+ * Check if the region [@base, @base+@size) intersects a reserved memory block.
+ *
+ * RETURNS:
+ * 0 if false, non-zero if true
+ */
int __init_memblock memblock_is_region_reserved(phys_addr_t base, phys_addr_t size)
{
memblock_cap_size(base, &size);
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index ac35bcc..f72b5e5 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1148,7 +1148,7 @@
{
if (root_memcg == memcg)
return true;
- if (!root_memcg->use_hierarchy)
+ if (!root_memcg->use_hierarchy || !memcg)
return false;
return css_is_ancestor(&memcg->css, &root_memcg->css);
}
@@ -1234,7 +1234,7 @@
/**
* mem_cgroup_margin - calculate chargeable space of a memory cgroup
- * @mem: the memory cgroup
+ * @memcg: the memory cgroup
*
* Returns the maximum amount of memory @mem can be charged with, in
* pages.
@@ -1508,7 +1508,7 @@
/**
* test_mem_cgroup_node_reclaimable
- * @mem: the target memcg
+ * @memcg: the target memcg
* @nid: the node ID to be checked.
* @noswap : specify true here if the user wants flle only information.
*
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index ab1e714..de4ce70 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -345,14 +345,14 @@
* Also when FAIL is set do a force kill because something went
* wrong earlier.
*/
-static void kill_procs(struct list_head *to_kill, int doit, int trapno,
+static void kill_procs(struct list_head *to_kill, int forcekill, int trapno,
int fail, struct page *page, unsigned long pfn,
int flags)
{
struct to_kill *tk, *next;
list_for_each_entry_safe (tk, next, to_kill, nd) {
- if (doit) {
+ if (forcekill) {
/*
* In case something went wrong with munmapping
* make sure the process doesn't catch the
@@ -858,7 +858,7 @@
struct address_space *mapping;
LIST_HEAD(tokill);
int ret;
- int kill = 1;
+ int kill = 1, forcekill;
struct page *hpage = compound_head(p);
struct page *ppage;
@@ -888,7 +888,7 @@
* be called inside page lock (it's recommended but not enforced).
*/
mapping = page_mapping(hpage);
- if (!PageDirty(hpage) && mapping &&
+ if (!(flags & MF_MUST_KILL) && !PageDirty(hpage) && mapping &&
mapping_cap_writeback_dirty(mapping)) {
if (page_mkclean(hpage)) {
SetPageDirty(hpage);
@@ -965,12 +965,14 @@
* Now that the dirty bit has been propagated to the
* struct page and all unmaps done we can decide if
* killing is needed or not. Only kill when the page
- * was dirty, otherwise the tokill list is merely
+ * was dirty or the process is not restartable,
+ * otherwise the tokill list is merely
* freed. When there was a problem unmapping earlier
* use a more force-full uncatchable kill to prevent
* any accesses to the poisoned memory.
*/
- kill_procs(&tokill, !!PageDirty(ppage), trapno,
+ forcekill = PageDirty(ppage) || (flags & MF_MUST_KILL);
+ kill_procs(&tokill, forcekill, trapno,
ret != SWAP_SUCCESS, p, pfn, flags);
return ret;
diff --git a/mm/memory.c b/mm/memory.c
index 1b7dc66..2466d12 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1225,7 +1225,15 @@
next = pmd_addr_end(addr, end);
if (pmd_trans_huge(*pmd)) {
if (next - addr != HPAGE_PMD_SIZE) {
- VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem));
+#ifdef CONFIG_DEBUG_VM
+ if (!rwsem_is_locked(&tlb->mm->mmap_sem)) {
+ pr_err("%s: mmap_sem is unlocked! addr=0x%lx end=0x%lx vma->vm_start=0x%lx vma->vm_end=0x%lx\n",
+ __func__, addr, end,
+ vma->vm_start,
+ vma->vm_end);
+ BUG();
+ }
+#endif
split_huge_page_pmd(vma->vm_mm, pmd);
} else if (zap_huge_pmd(tlb, vma, pmd, addr))
goto next;
@@ -1366,7 +1374,7 @@
/**
* zap_page_range - remove user pages in a given range
* @vma: vm_area_struct holding the applicable pages
- * @address: starting address of pages to zap
+ * @start: starting address of pages to zap
* @size: number of bytes to zap
* @details: details of nonlinear truncation or shared cache invalidation
*
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 0d7e3ec..427bb29 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -618,7 +618,7 @@
pgdat = hotadd_new_pgdat(nid, start);
ret = -ENOMEM;
if (!pgdat)
- goto out;
+ goto error;
new_pgdat = 1;
}
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index f15c1b2..1d771e4 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1177,7 +1177,7 @@
if (!list_empty(&pagelist)) {
nr_failed = migrate_pages(&pagelist, new_vma_page,
(unsigned long)vma,
- false, true);
+ false, MIGRATE_SYNC);
if (nr_failed)
putback_lru_pages(&pagelist);
}
diff --git a/mm/nobootmem.c b/mm/nobootmem.c
index d23415c..4055730 100644
--- a/mm/nobootmem.c
+++ b/mm/nobootmem.c
@@ -105,27 +105,35 @@
__free_pages_bootmem(pfn_to_page(i), 0);
}
+static unsigned long __init __free_memory_core(phys_addr_t start,
+ phys_addr_t end)
+{
+ unsigned long start_pfn = PFN_UP(start);
+ unsigned long end_pfn = min_t(unsigned long,
+ PFN_DOWN(end), max_low_pfn);
+
+ if (start_pfn > end_pfn)
+ return 0;
+
+ __free_pages_memory(start_pfn, end_pfn);
+
+ return end_pfn - start_pfn;
+}
+
unsigned long __init free_low_memory_core_early(int nodeid)
{
unsigned long count = 0;
- phys_addr_t start, end;
+ phys_addr_t start, end, size;
u64 i;
- /* free reserved array temporarily so that it's treated as free area */
- memblock_free_reserved_regions();
+ for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL)
+ count += __free_memory_core(start, end);
- for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL) {
- unsigned long start_pfn = PFN_UP(start);
- unsigned long end_pfn = min_t(unsigned long,
- PFN_DOWN(end), max_low_pfn);
- if (start_pfn < end_pfn) {
- __free_pages_memory(start_pfn, end_pfn);
- count += end_pfn - start_pfn;
- }
- }
+ /* free range that is used for reserved array if we allocate it */
+ size = get_allocated_memblock_reserved_regions_info(&start);
+ if (size)
+ count += __free_memory_core(start, start + size);
- /* put region array back? */
- memblock_reserve_reserved_regions();
return count;
}
@@ -274,7 +282,7 @@
return ___alloc_bootmem(size, align, goal, limit);
}
-static void * __init ___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
+void * __init ___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
unsigned long size,
unsigned long align,
unsigned long goal,
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 416637f..ac300c9 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -184,6 +184,7 @@
const nodemask_t *nodemask, unsigned long totalpages)
{
long points;
+ long adj;
if (oom_unkillable_task(p, memcg, nodemask))
return 0;
@@ -192,7 +193,8 @@
if (!p)
return 0;
- if (p->signal->oom_score_adj == OOM_SCORE_ADJ_MIN) {
+ adj = p->signal->oom_score_adj;
+ if (adj == OOM_SCORE_ADJ_MIN) {
task_unlock(p);
return 0;
}
@@ -210,14 +212,11 @@
* implementation used by LSMs.
*/
if (has_capability_noaudit(p, CAP_SYS_ADMIN))
- points -= 30 * totalpages / 1000;
+ adj -= 30;
- /*
- * /proc/pid/oom_score_adj ranges from -1000 to +1000 such that it may
- * either completely disable oom killing or always prefer a certain
- * task.
- */
- points += p->signal->oom_score_adj * totalpages / 1000;
+ /* Normalize to oom_score_adj units */
+ adj *= totalpages / 1000;
+ points += adj;
/*
* Never return 0 for an eligible task regardless of the root bonus and
@@ -366,7 +365,7 @@
/**
* dump_tasks - dump current memory state of all system tasks
- * @mem: current's memory controller, if constrained
+ * @memcg: current's memory controller, if constrained
* @nodemask: nodemask passed to page allocator for mempolicy ooms
*
* Dumps the current memory state of all eligible tasks. Tasks not in the same
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 4403009..4a4f921 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5635,7 +5635,12 @@
__alloc_contig_migrate_alloc(struct page *page, unsigned long private,
int **resultp)
{
- return alloc_page(GFP_HIGHUSER_MOVABLE);
+ gfp_t gfp_mask = GFP_USER | __GFP_MOVABLE;
+
+ if (PageHighMem(page))
+ gfp_mask |= __GFP_HIGHMEM;
+
+ return alloc_page(gfp_mask);
}
/* [start, end) must belong to a single zone. */
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 1ccbd71..eb750f8 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -392,7 +392,7 @@
/**
* swap_cgroup_cmpxchg - cmpxchg mem_cgroup's id for this swp_entry.
- * @end: swap entry to be cmpxchged
+ * @ent: swap entry to be cmpxchged
* @old: old id
* @new: new id
*
@@ -422,7 +422,7 @@
/**
* swap_cgroup_record - record mem_cgroup for this swp_entry.
* @ent: swap entry to be recorded into
- * @mem: mem_cgroup to be recorded
+ * @id: mem_cgroup to be recorded
*
* Returns old value at success, 0 at failure.
* (Of course, old value can be 0.)
diff --git a/mm/pagewalk.c b/mm/pagewalk.c
index aa9701e..6c118d0 100644
--- a/mm/pagewalk.c
+++ b/mm/pagewalk.c
@@ -162,7 +162,6 @@
/**
* walk_page_range - walk a memory map's page tables with a callback
- * @mm: memory map to walk
* @addr: starting address
* @end: ending address
* @walk: set of callbacks to invoke for each level of the tree
diff --git a/mm/percpu-vm.c b/mm/percpu-vm.c
index 405d331..3707c71 100644
--- a/mm/percpu-vm.c
+++ b/mm/percpu-vm.c
@@ -360,7 +360,6 @@
* @chunk: chunk to depopulate
* @off: offset to the area to depopulate
* @size: size of the area to depopulate in bytes
- * @flush: whether to flush cache and tlb or not
*
* For each cpu, depopulate and unmap pages [@page_start,@page_end)
* from @chunk. If @flush is true, vcache is flushed before unmapping
diff --git a/mm/shmem.c b/mm/shmem.c
index a15a466..c15b998 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -264,46 +264,55 @@
}
/*
+ * Sometimes, before we decide whether to proceed or to fail, we must check
+ * that an entry was not already brought back from swap by a racing thread.
+ *
+ * Checking page is not enough: by the time a SwapCache page is locked, it
+ * might be reused, and again be SwapCache, using the same swap as before.
+ */
+static bool shmem_confirm_swap(struct address_space *mapping,
+ pgoff_t index, swp_entry_t swap)
+{
+ void *item;
+
+ rcu_read_lock();
+ item = radix_tree_lookup(&mapping->page_tree, index);
+ rcu_read_unlock();
+ return item == swp_to_radix_entry(swap);
+}
+
+/*
* Like add_to_page_cache_locked, but error if expected item has gone.
*/
static int shmem_add_to_page_cache(struct page *page,
struct address_space *mapping,
pgoff_t index, gfp_t gfp, void *expected)
{
- int error = 0;
+ int error;
VM_BUG_ON(!PageLocked(page));
VM_BUG_ON(!PageSwapBacked(page));
- if (!expected)
- error = radix_tree_preload(gfp & GFP_RECLAIM_MASK);
- if (!error) {
- page_cache_get(page);
- page->mapping = mapping;
- page->index = index;
+ page_cache_get(page);
+ page->mapping = mapping;
+ page->index = index;
- spin_lock_irq(&mapping->tree_lock);
- if (!expected)
- error = radix_tree_insert(&mapping->page_tree,
- index, page);
- else
- error = shmem_radix_tree_replace(mapping, index,
- expected, page);
- if (!error) {
- mapping->nrpages++;
- __inc_zone_page_state(page, NR_FILE_PAGES);
- __inc_zone_page_state(page, NR_SHMEM);
- spin_unlock_irq(&mapping->tree_lock);
- } else {
- page->mapping = NULL;
- spin_unlock_irq(&mapping->tree_lock);
- page_cache_release(page);
- }
- if (!expected)
- radix_tree_preload_end();
+ spin_lock_irq(&mapping->tree_lock);
+ if (!expected)
+ error = radix_tree_insert(&mapping->page_tree, index, page);
+ else
+ error = shmem_radix_tree_replace(mapping, index, expected,
+ page);
+ if (!error) {
+ mapping->nrpages++;
+ __inc_zone_page_state(page, NR_FILE_PAGES);
+ __inc_zone_page_state(page, NR_SHMEM);
+ spin_unlock_irq(&mapping->tree_lock);
+ } else {
+ page->mapping = NULL;
+ spin_unlock_irq(&mapping->tree_lock);
+ page_cache_release(page);
}
- if (error)
- mem_cgroup_uncharge_cache_page(page);
return error;
}
@@ -1124,9 +1133,9 @@
/* We have to do this with page locked to prevent races */
lock_page(page);
if (!PageSwapCache(page) || page_private(page) != swap.val ||
- page->mapping) {
+ !shmem_confirm_swap(mapping, index, swap)) {
error = -EEXIST; /* try again */
- goto failed;
+ goto unlock;
}
if (!PageUptodate(page)) {
error = -EIO;
@@ -1142,9 +1151,12 @@
error = mem_cgroup_cache_charge(page, current->mm,
gfp & GFP_RECLAIM_MASK);
- if (!error)
+ if (!error) {
error = shmem_add_to_page_cache(page, mapping, index,
gfp, swp_to_radix_entry(swap));
+ /* We already confirmed swap, and make no allocation */
+ VM_BUG_ON(error);
+ }
if (error)
goto failed;
@@ -1181,11 +1193,18 @@
__set_page_locked(page);
error = mem_cgroup_cache_charge(page, current->mm,
gfp & GFP_RECLAIM_MASK);
- if (!error)
- error = shmem_add_to_page_cache(page, mapping, index,
- gfp, NULL);
if (error)
goto decused;
+ error = radix_tree_preload(gfp & GFP_RECLAIM_MASK);
+ if (!error) {
+ error = shmem_add_to_page_cache(page, mapping, index,
+ gfp, NULL);
+ radix_tree_preload_end();
+ }
+ if (error) {
+ mem_cgroup_uncharge_cache_page(page);
+ goto decused;
+ }
lru_cache_add_anon(page);
spin_lock(&info->lock);
@@ -1245,14 +1264,10 @@
unacct:
shmem_unacct_blocks(info->flags, 1);
failed:
- if (swap.val && error != -EINVAL) {
- struct page *test = find_get_page(mapping, index);
- if (test && !radix_tree_exceptional_entry(test))
- page_cache_release(test);
- /* Have another try if the entry has changed */
- if (test != swp_to_radix_entry(swap))
- error = -EEXIST;
- }
+ if (swap.val && error != -EINVAL &&
+ !shmem_confirm_swap(mapping, index, swap))
+ error = -EEXIST;
+unlock:
if (page) {
unlock_page(page);
page_cache_release(page);
@@ -1264,7 +1279,7 @@
spin_unlock(&info->lock);
goto repeat;
}
- if (error == -EEXIST)
+ if (error == -EEXIST) /* from above or from radix_tree_insert */
goto repeat;
return error;
}
@@ -1594,6 +1609,7 @@
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &page_cache_pipe_buf_ops,
.spd_release = spd_release_page,
@@ -1682,7 +1698,7 @@
if (spd.nr_pages)
error = splice_to_pipe(pipe, &spd);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
if (error > 0) {
*ppos += error;
@@ -1691,98 +1707,6 @@
return error;
}
-/*
- * llseek SEEK_DATA or SEEK_HOLE through the radix_tree.
- */
-static pgoff_t shmem_seek_hole_data(struct address_space *mapping,
- pgoff_t index, pgoff_t end, int origin)
-{
- struct page *page;
- struct pagevec pvec;
- pgoff_t indices[PAGEVEC_SIZE];
- bool done = false;
- int i;
-
- pagevec_init(&pvec, 0);
- pvec.nr = 1; /* start small: we may be there already */
- while (!done) {
- pvec.nr = shmem_find_get_pages_and_swap(mapping, index,
- pvec.nr, pvec.pages, indices);
- if (!pvec.nr) {
- if (origin == SEEK_DATA)
- index = end;
- break;
- }
- for (i = 0; i < pvec.nr; i++, index++) {
- if (index < indices[i]) {
- if (origin == SEEK_HOLE) {
- done = true;
- break;
- }
- index = indices[i];
- }
- page = pvec.pages[i];
- if (page && !radix_tree_exceptional_entry(page)) {
- if (!PageUptodate(page))
- page = NULL;
- }
- if (index >= end ||
- (page && origin == SEEK_DATA) ||
- (!page && origin == SEEK_HOLE)) {
- done = true;
- break;
- }
- }
- shmem_deswap_pagevec(&pvec);
- pagevec_release(&pvec);
- pvec.nr = PAGEVEC_SIZE;
- cond_resched();
- }
- return index;
-}
-
-static loff_t shmem_file_llseek(struct file *file, loff_t offset, int origin)
-{
- struct address_space *mapping;
- struct inode *inode;
- pgoff_t start, end;
- loff_t new_offset;
-
- if (origin != SEEK_DATA && origin != SEEK_HOLE)
- return generic_file_llseek_size(file, offset, origin,
- MAX_LFS_FILESIZE);
- mapping = file->f_mapping;
- inode = mapping->host;
- mutex_lock(&inode->i_mutex);
- /* We're holding i_mutex so we can access i_size directly */
-
- if (offset < 0)
- offset = -EINVAL;
- else if (offset >= inode->i_size)
- offset = -ENXIO;
- else {
- start = offset >> PAGE_CACHE_SHIFT;
- end = (inode->i_size + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- new_offset = shmem_seek_hole_data(mapping, start, end, origin);
- new_offset <<= PAGE_CACHE_SHIFT;
- if (new_offset > offset) {
- if (new_offset < inode->i_size)
- offset = new_offset;
- else if (origin == SEEK_DATA)
- offset = -ENXIO;
- else
- offset = inode->i_size;
- }
- }
-
- if (offset >= 0 && offset != file->f_pos) {
- file->f_pos = offset;
- file->f_version = 0;
- }
- mutex_unlock(&inode->i_mutex);
- return offset;
-}
-
static long shmem_fallocate(struct file *file, int mode, loff_t offset,
loff_t len)
{
@@ -1953,7 +1877,7 @@
}
static int shmem_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
+ bool excl)
{
return shmem_mknod(dir, dentry, mode | S_IFREG, 0);
}
@@ -2786,7 +2710,7 @@
static const struct file_operations shmem_file_operations = {
.mmap = shmem_mmap,
#ifdef CONFIG_TMPFS
- .llseek = shmem_file_llseek,
+ .llseek = generic_file_llseek,
.read = do_sync_read,
.write = do_sync_write,
.aio_read = shmem_file_aio_read,
diff --git a/mm/sparse.c b/mm/sparse.c
index 6a4bf91..c7bb952 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -275,8 +275,9 @@
sparse_early_usemaps_alloc_pgdat_section(struct pglist_data *pgdat,
unsigned long size)
{
- pg_data_t *host_pgdat;
- unsigned long goal;
+ unsigned long goal, limit;
+ unsigned long *p;
+ int nid;
/*
* A page may contain usemaps for other sections preventing the
* page being freed and making a section unremovable while
@@ -287,10 +288,17 @@
* from the same section as the pgdat where possible to avoid
* this problem.
*/
- goal = __pa(pgdat) & PAGE_SECTION_MASK;
- host_pgdat = NODE_DATA(early_pfn_to_nid(goal >> PAGE_SHIFT));
- return __alloc_bootmem_node_nopanic(host_pgdat, size,
- SMP_CACHE_BYTES, goal);
+ goal = __pa(pgdat) & (PAGE_SECTION_MASK << PAGE_SHIFT);
+ limit = goal + (1UL << PA_SECTION_SHIFT);
+ nid = early_pfn_to_nid(goal >> PAGE_SHIFT);
+again:
+ p = ___alloc_bootmem_node_nopanic(NODE_DATA(nid), size,
+ SMP_CACHE_BYTES, goal, limit);
+ if (!p && limit) {
+ limit = 0;
+ goto again;
+ }
+ return p;
}
static void __init check_usemap_section_nr(int nid, unsigned long *usemap)
diff --git a/mm/swapfile.c b/mm/swapfile.c
index de5bc51..71373d0 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1916,24 +1916,20 @@
/*
* Find out how many pages are allowed for a single swap
- * device. There are three limiting factors: 1) the number
+ * device. There are two limiting factors: 1) the number
* of bits for the swap offset in the swp_entry_t type, and
* 2) the number of bits in the swap pte as defined by the
- * the different architectures, and 3) the number of free bits
- * in an exceptional radix_tree entry. In order to find the
+ * different architectures. In order to find the
* largest possible bit mask, a swap entry with swap type 0
* and swap offset ~0UL is created, encoded to a swap pte,
* decoded to a swp_entry_t again, and finally the swap
* offset is extracted. This will mask all the bits from
* the initial ~0UL mask that can't be encoded in either
* the swp_entry_t or the architecture definition of a
- * swap pte. Then the same is done for a radix_tree entry.
+ * swap pte.
*/
maxpages = swp_offset(pte_to_swp_entry(
- swp_entry_to_pte(swp_entry(0, ~0UL))));
- maxpages = swp_offset(radix_to_swp_entry(
- swp_to_radix_entry(swp_entry(0, maxpages)))) + 1;
-
+ swp_entry_to_pte(swp_entry(0, ~0UL)))) + 1;
if (maxpages > swap_header->info.last_page) {
maxpages = swap_header->info.last_page + 1;
/* p->max is an unsigned int: don't overflow it */
diff --git a/mm/vmscan.c b/mm/vmscan.c
index eeb3bc9..66e4310 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2688,7 +2688,10 @@
* them before going back to sleep.
*/
set_pgdat_percpu_threshold(pgdat, calculate_normal_threshold);
- schedule();
+
+ if (!kthread_should_stop())
+ schedule();
+
set_pgdat_percpu_threshold(pgdat, calculate_pressure_threshold);
} else {
if (remaining)
@@ -2955,14 +2958,17 @@
}
/*
- * Called by memory hotplug when all memory in a node is offlined.
+ * Called by memory hotplug when all memory in a node is offlined. Caller must
+ * hold lock_memory_hotplug().
*/
void kswapd_stop(int nid)
{
struct task_struct *kswapd = NODE_DATA(nid)->kswapd;
- if (kswapd)
+ if (kswapd) {
kthread_stop(kswapd);
+ NODE_DATA(nid)->kswapd = NULL;
+ }
}
static int __init kswapd_init(void)
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 6089f0c..9096bcb 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -403,6 +403,9 @@
break;
case NETDEV_DOWN:
+ if (dev->features & NETIF_F_HW_VLAN_FILTER)
+ vlan_vid_del(dev, 0);
+
/* Put all VLANs for this dev in the down state too. */
for (i = 0; i < VLAN_N_VID; i++) {
vlandev = vlan_group_get_device(grp, i);
diff --git a/net/9p/protocol.c b/net/9p/protocol.c
index 9ee48cb..3d33ecf 100644
--- a/net/9p/protocol.c
+++ b/net/9p/protocol.c
@@ -368,7 +368,7 @@
const char *sptr = va_arg(ap, const char *);
uint16_t len = 0;
if (sptr)
- len = min_t(uint16_t, strlen(sptr),
+ len = min_t(size_t, strlen(sptr),
USHRT_MAX);
errcode = p9pdu_writef(pdu, proto_version,
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index 5af18d1..2a16765 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -192,10 +192,10 @@
s = rest_of_page(data);
if (s > count)
s = count;
+ BUG_ON(index > limit);
sg_set_buf(&sg[index++], data, s);
count -= s;
data += s;
- BUG_ON(index > limit);
}
return index-start;
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 0301b32..8685296 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -1208,9 +1208,7 @@
if (addr->sat_addr.s_node == ATADDR_BCAST &&
!sock_flag(sk, SOCK_BROADCAST)) {
#if 1
- printk(KERN_WARNING "%s is broken and did not set "
- "SO_BROADCAST. It will break when 2.2 is "
- "released.\n",
+ pr_warn("atalk_connect: %s is broken and did not set SO_BROADCAST.\n",
current->comm);
#else
return -EACCES;
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index 051f7ab..779095d 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -842,6 +842,7 @@
case AX25_P_NETROM:
if (ax25_protocol_is_registered(AX25_P_NETROM))
return -ESOCKTNOSUPPORT;
+ break;
#endif
#ifdef CONFIG_ROSE_MODULE
case AX25_P_ROSE:
diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c
index 8bf9751..c5863f4 100644
--- a/net/batman-adv/bridge_loop_avoidance.c
+++ b/net/batman-adv/bridge_loop_avoidance.c
@@ -1351,6 +1351,7 @@
* @bat_priv: the bat priv with all the soft interface information
* @skb: the frame to be checked
* @vid: the VLAN ID of the frame
+ * @is_bcast: the packet came in a broadcast packet type.
*
* bla_rx avoidance checks if:
* * we have to race for a claim
@@ -1361,7 +1362,8 @@
* process the skb.
*
*/
-int bla_rx(struct bat_priv *bat_priv, struct sk_buff *skb, short vid)
+int bla_rx(struct bat_priv *bat_priv, struct sk_buff *skb, short vid,
+ bool is_bcast)
{
struct ethhdr *ethhdr;
struct claim search_claim, *claim = NULL;
@@ -1380,7 +1382,7 @@
if (unlikely(atomic_read(&bat_priv->bla_num_requests)))
/* don't allow broadcasts while requests are in flight */
- if (is_multicast_ether_addr(ethhdr->h_dest))
+ if (is_multicast_ether_addr(ethhdr->h_dest) && is_bcast)
goto handled;
memcpy(search_claim.addr, ethhdr->h_source, ETH_ALEN);
@@ -1406,8 +1408,13 @@
}
/* if it is a broadcast ... */
- if (is_multicast_ether_addr(ethhdr->h_dest)) {
- /* ... drop it. the responsible gateway is in charge. */
+ if (is_multicast_ether_addr(ethhdr->h_dest) && is_bcast) {
+ /* ... drop it. the responsible gateway is in charge.
+ *
+ * We need to check is_bcast because with the gateway
+ * feature, broadcasts (like DHCP requests) may be sent
+ * using a unicast packet type.
+ */
goto handled;
} else {
/* seems the client considers us as its best gateway.
diff --git a/net/batman-adv/bridge_loop_avoidance.h b/net/batman-adv/bridge_loop_avoidance.h
index e39f93a..dc5227b 100644
--- a/net/batman-adv/bridge_loop_avoidance.h
+++ b/net/batman-adv/bridge_loop_avoidance.h
@@ -23,7 +23,8 @@
#define _NET_BATMAN_ADV_BLA_H_
#ifdef CONFIG_BATMAN_ADV_BLA
-int bla_rx(struct bat_priv *bat_priv, struct sk_buff *skb, short vid);
+int bla_rx(struct bat_priv *bat_priv, struct sk_buff *skb, short vid,
+ bool is_bcast);
int bla_tx(struct bat_priv *bat_priv, struct sk_buff *skb, short vid);
int bla_is_backbone_gw(struct sk_buff *skb,
struct orig_node *orig_node, int hdr_size);
@@ -41,7 +42,7 @@
#else /* ifdef CONFIG_BATMAN_ADV_BLA */
static inline int bla_rx(struct bat_priv *bat_priv, struct sk_buff *skb,
- short vid)
+ short vid, bool is_bcast)
{
return 0;
}
diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c
index 840e2c6..015471d 100644
--- a/net/batman-adv/routing.c
+++ b/net/batman-adv/routing.c
@@ -617,6 +617,8 @@
* changes */
if (skb_linearize(skb) < 0)
goto out;
+ /* skb_linearize() possibly changed skb->data */
+ tt_query = (struct tt_query_packet *)skb->data;
tt_len = tt_query->tt_data * sizeof(struct tt_change);
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index 6e2530b..a0ec0e4 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -256,7 +256,11 @@
struct bat_priv *bat_priv = netdev_priv(soft_iface);
struct ethhdr *ethhdr;
struct vlan_ethhdr *vhdr;
+ struct batman_header *batadv_header = (struct batman_header *)skb->data;
short vid __maybe_unused = -1;
+ bool is_bcast;
+
+ is_bcast = (batadv_header->packet_type == BAT_BCAST);
/* check if enough space is available for pulling, and pull */
if (!pskb_may_pull(skb, hdr_size))
@@ -302,7 +306,7 @@
/* Let the bridge loop avoidance check the packet. If will
* not handle it, we can safely push it up.
*/
- if (bla_rx(bat_priv, skb, vid))
+ if (bla_rx(bat_priv, skb, vid, is_bcast))
goto out;
netif_rx(skb);
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index a66c2dc..2ab83d7 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -141,13 +141,14 @@
struct tt_orig_list_entry *orig_entry;
orig_entry = container_of(rcu, struct tt_orig_list_entry, rcu);
- atomic_dec(&orig_entry->orig_node->tt_size);
orig_node_free_ref(orig_entry->orig_node);
kfree(orig_entry);
}
static void tt_orig_list_entry_free_ref(struct tt_orig_list_entry *orig_entry)
{
+ /* to avoid race conditions, immediately decrease the tt counter */
+ atomic_dec(&orig_entry->orig_node->tt_size);
call_rcu(&orig_entry->rcu, tt_orig_list_entry_free_rcu);
}
@@ -910,7 +911,6 @@
}
spin_unlock_bh(list_lock);
}
- atomic_set(&orig_node->tt_size, 0);
orig_node->tt_initialised = false;
}
@@ -2031,10 +2031,10 @@
{
struct tt_local_entry *tt_local_entry = NULL;
struct tt_global_entry *tt_global_entry = NULL;
- bool ret = true;
+ bool ret = false;
if (!atomic_read(&bat_priv->ap_isolation))
- return false;
+ goto out;
tt_local_entry = tt_local_hash_find(bat_priv, dst);
if (!tt_local_entry)
@@ -2044,10 +2044,10 @@
if (!tt_global_entry)
goto out;
- if (_is_ap_isolated(tt_local_entry, tt_global_entry))
+ if (!_is_ap_isolated(tt_local_entry, tt_global_entry))
goto out;
- ret = false;
+ ret = true;
out:
if (tt_global_entry)
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 46e7f86..3e18af4 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -210,7 +210,7 @@
}
if (sk->sk_state == BT_CONNECTED || !newsock ||
- test_bit(BT_DEFER_SETUP, &bt_sk(parent)->flags)) {
+ test_bit(BT_SK_DEFER_SETUP, &bt_sk(parent)->flags)) {
bt_accept_unlink(sk);
if (newsock)
sock_graft(sk, newsock);
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 4eefb7f..94ad124 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3043,6 +3043,50 @@
hci_dev_unlock(hdev);
}
+static void hci_key_refresh_complete_evt(struct hci_dev *hdev,
+ struct sk_buff *skb)
+{
+ struct hci_ev_key_refresh_complete *ev = (void *) skb->data;
+ struct hci_conn *conn;
+
+ BT_DBG("%s status %u handle %u", hdev->name, ev->status,
+ __le16_to_cpu(ev->handle));
+
+ hci_dev_lock(hdev);
+
+ conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
+ if (!conn)
+ goto unlock;
+
+ if (!ev->status)
+ conn->sec_level = conn->pending_sec_level;
+
+ clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);
+
+ if (ev->status && conn->state == BT_CONNECTED) {
+ hci_acl_disconn(conn, HCI_ERROR_AUTH_FAILURE);
+ hci_conn_put(conn);
+ goto unlock;
+ }
+
+ if (conn->state == BT_CONFIG) {
+ if (!ev->status)
+ conn->state = BT_CONNECTED;
+
+ hci_proto_connect_cfm(conn, ev->status);
+ hci_conn_put(conn);
+ } else {
+ hci_auth_cfm(conn, ev->status);
+
+ hci_conn_hold(conn);
+ conn->disc_timeout = HCI_DISCONN_TIMEOUT;
+ hci_conn_put(conn);
+ }
+
+unlock:
+ hci_dev_unlock(hdev);
+}
+
static inline u8 hci_get_auth_req(struct hci_conn *conn)
{
/* If remote requests dedicated bonding follow that lead */
@@ -3559,6 +3603,10 @@
hci_extended_inquiry_result_evt(hdev, skb);
break;
+ case HCI_EV_KEY_REFRESH_COMPLETE:
+ hci_key_refresh_complete_evt(hdev, skb);
+ break;
+
case HCI_EV_IO_CAPA_REQUEST:
hci_io_capa_request_evt(hdev, skb);
break;
diff --git a/net/bluetooth/hidp/Kconfig b/net/bluetooth/hidp/Kconfig
index 4deaca7..9332bc7 100644
--- a/net/bluetooth/hidp/Kconfig
+++ b/net/bluetooth/hidp/Kconfig
@@ -1,6 +1,6 @@
config BT_HIDP
tristate "HIDP protocol support"
- depends on BT && INPUT && HID_SUPPORT
+ depends on BT && INPUT
select HID
help
HIDP (Human Interface Device Protocol) is a transport layer
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 24f144b..4554e80 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -1295,7 +1295,12 @@
struct l2cap_conn *conn = container_of(work, struct l2cap_conn,
security_timer.work);
- l2cap_conn_del(conn->hcon, ETIMEDOUT);
+ BT_DBG("conn %p", conn);
+
+ if (test_and_clear_bit(HCI_CONN_LE_SMP_PEND, &conn->hcon->flags)) {
+ smp_chan_destroy(conn);
+ l2cap_conn_del(conn->hcon, ETIMEDOUT);
+ }
}
static struct l2cap_conn *l2cap_conn_add(struct hci_conn *hcon, u8 status)
@@ -2910,12 +2915,14 @@
while (len >= L2CAP_CONF_OPT_SIZE) {
len -= l2cap_get_conf_opt(&rsp, &type, &olen, &val);
- switch (type) {
- case L2CAP_CONF_RFC:
- if (olen == sizeof(rfc))
- memcpy(&rfc, (void *)val, olen);
- goto done;
- }
+ if (type != L2CAP_CONF_RFC)
+ continue;
+
+ if (olen != sizeof(rfc))
+ break;
+
+ memcpy(&rfc, (void *)val, olen);
+ goto done;
}
/* Use sane default values in case a misbehaving remote device
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 25d2207..3e5e336 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -1598,7 +1598,7 @@
else
conn = hci_conn_hash_lookup_ba(hdev, LE_LINK, &cp->addr.bdaddr);
- if (!conn) {
+ if (!conn || conn->state == BT_OPEN || conn->state == BT_CLOSED) {
err = cmd_status(sk, hdev->id, MGMT_OP_DISCONNECT,
MGMT_STATUS_NOT_CONNECTED);
goto failed;
@@ -1873,6 +1873,22 @@
pairing_complete(cmd, mgmt_status(status));
}
+static void le_connect_complete_cb(struct hci_conn *conn, u8 status)
+{
+ struct pending_cmd *cmd;
+
+ BT_DBG("status %u", status);
+
+ if (!status)
+ return;
+
+ cmd = find_pairing(conn);
+ if (!cmd)
+ BT_DBG("Unable to find a pending command");
+ else
+ pairing_complete(cmd, mgmt_status(status));
+}
+
static int pair_device(struct sock *sk, struct hci_dev *hdev, void *data,
u16 len)
{
@@ -1934,6 +1950,8 @@
/* For LE, just connecting isn't a proof that the pairing finished */
if (cp->addr.type == BDADDR_BREDR)
conn->connect_cfm_cb = pairing_complete_cb;
+ else
+ conn->connect_cfm_cb = le_connect_complete_cb;
conn->security_cfm_cb = pairing_complete_cb;
conn->disconn_cfm_cb = pairing_complete_cb;
diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c
index 6fc7c47..37df4e9 100644
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -648,7 +648,7 @@
auth |= (req->auth_req | rsp->auth_req) & SMP_AUTH_MITM;
- ret = tk_request(conn, 0, auth, rsp->io_capability, req->io_capability);
+ ret = tk_request(conn, 0, auth, req->io_capability, rsp->io_capability);
if (ret)
return SMP_UNSPECIFIED;
@@ -703,7 +703,7 @@
return 0;
}
-static u8 smp_ltk_encrypt(struct l2cap_conn *conn)
+static u8 smp_ltk_encrypt(struct l2cap_conn *conn, u8 sec_level)
{
struct smp_ltk *key;
struct hci_conn *hcon = conn->hcon;
@@ -712,6 +712,9 @@
if (!key)
return 0;
+ if (sec_level > BT_SECURITY_MEDIUM && !key->authenticated)
+ return 0;
+
if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &hcon->flags))
return 1;
@@ -732,7 +735,7 @@
hcon->pending_sec_level = authreq_to_seclevel(rp->auth_req);
- if (smp_ltk_encrypt(conn))
+ if (smp_ltk_encrypt(conn, hcon->pending_sec_level))
return 0;
if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->flags))
@@ -771,7 +774,7 @@
return 1;
if (hcon->link_mode & HCI_LM_MASTER)
- if (smp_ltk_encrypt(conn))
+ if (smp_ltk_encrypt(conn, sec_level))
goto done;
if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->flags))
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 0a942fb..e1144e1 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -240,6 +240,7 @@
return -ENOMEM;
dev_net_set(dev, net);
+ dev->rtnl_link_ops = &br_link_ops;
res = register_netdev(dev);
if (res)
diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
index 2080485..fe41260 100644
--- a/net/bridge/br_netlink.c
+++ b/net/bridge/br_netlink.c
@@ -208,7 +208,7 @@
return 0;
}
-static struct rtnl_link_ops br_link_ops __read_mostly = {
+struct rtnl_link_ops br_link_ops __read_mostly = {
.kind = "bridge",
.priv_size = sizeof(struct net_bridge),
.setup = br_dev_setup,
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 1a8ad4f..a768b24 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -549,6 +549,7 @@
#endif
/* br_netlink.c */
+extern struct rtnl_link_ops br_link_ops;
extern int br_netlink_init(void);
extern void br_netlink_fini(void);
extern void br_ifinfo_notify(int event, struct net_bridge_port *port);
diff --git a/net/caif/caif_dev.c b/net/caif/caif_dev.c
index aa6f716..8c83c17 100644
--- a/net/caif/caif_dev.c
+++ b/net/caif/caif_dev.c
@@ -4,8 +4,7 @@
* Author: Sjur Brendeland/sjur.brandeland@stericsson.com
* License terms: GNU General Public License (GPL) version 2
*
- * Borrowed heavily from file: pn_dev.c. Thanks to
- * Remi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Borrowed heavily from file: pn_dev.c. Thanks to Remi Denis-Courmont
* and Sakari Ailus <sakari.ailus@nokia.com>
*/
@@ -562,9 +561,9 @@
static void __exit caif_device_exit(void)
{
- unregister_pernet_subsys(&caif_net_ops);
unregister_netdevice_notifier(&caif_device_notifier);
dev_remove_pack(&caif_packet_type);
+ unregister_pernet_subsys(&caif_net_ops);
}
module_init(caif_device_init);
diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c
index fb89443..78f1cda 100644
--- a/net/caif/caif_socket.c
+++ b/net/caif/caif_socket.c
@@ -220,6 +220,7 @@
cfsk_hold, cfsk_put);
cf_sk->sk.sk_state = CAIF_CONNECTED;
set_tx_flow_on(cf_sk);
+ cf_sk->sk.sk_shutdown = 0;
cf_sk->sk.sk_state_change(&cf_sk->sk);
break;
diff --git a/net/can/raw.c b/net/can/raw.c
index cde1b4a..46cca3a 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -681,9 +681,6 @@
if (err < 0)
goto free_skb;
- /* to be able to check the received tx sock reference in raw_rcv() */
- skb_shinfo(skb)->tx_flags |= SKBTX_DRV_NEEDS_SK_REF;
-
skb->dev = dev;
skb->sk = sk;
diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c
index a776f75..ba4323b 100644
--- a/net/ceph/ceph_common.c
+++ b/net/ceph/ceph_common.c
@@ -504,13 +504,6 @@
/* unmount */
ceph_osdc_stop(&client->osdc);
- /*
- * make sure osd connections close out before destroying the
- * auth module, which is needed to free those connections'
- * ceph_authorizers.
- */
- ceph_msgr_flush();
-
ceph_monc_stop(&client->monc);
ceph_debugfs_client_cleanup(client);
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index 524f4e4..10255e8 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -563,6 +563,10 @@
m->hdr.seq = cpu_to_le64(++con->out_seq);
m->needs_out_seq = false;
}
+#ifdef CONFIG_BLOCK
+ else
+ m->bio_iter = NULL;
+#endif
dout("prepare_write_message %p seq %lld type %d len %d+%d+%d %d pgs\n",
m, con->out_seq, le16_to_cpu(m->hdr.type),
@@ -1419,7 +1423,7 @@
* dropped messages.
*/
dout("process_connect got RESET peer seq %u\n",
- le32_to_cpu(con->in_connect.connect_seq));
+ le32_to_cpu(con->in_reply.connect_seq));
pr_err("%s%lld %s connection reset\n",
ENTITY_NAME(con->peer_name),
ceph_pr_addr(&con->peer_addr.in_addr));
@@ -1446,10 +1450,10 @@
* If we sent a smaller connect_seq than the peer has, try
* again with a larger value.
*/
- dout("process_connect got RETRY my seq = %u, peer_seq = %u\n",
+ dout("process_connect got RETRY_SESSION my seq %u, peer %u\n",
le32_to_cpu(con->out_connect.connect_seq),
- le32_to_cpu(con->in_connect.connect_seq));
- con->connect_seq = le32_to_cpu(con->in_connect.connect_seq);
+ le32_to_cpu(con->in_reply.connect_seq));
+ con->connect_seq = le32_to_cpu(con->in_reply.connect_seq);
ceph_con_out_kvec_reset(con);
ret = prepare_write_connect(con);
if (ret < 0)
@@ -1464,9 +1468,9 @@
*/
dout("process_connect got RETRY_GLOBAL my %u peer_gseq %u\n",
con->peer_global_seq,
- le32_to_cpu(con->in_connect.global_seq));
+ le32_to_cpu(con->in_reply.global_seq));
get_global_seq(con->msgr,
- le32_to_cpu(con->in_connect.global_seq));
+ le32_to_cpu(con->in_reply.global_seq));
ceph_con_out_kvec_reset(con);
ret = prepare_write_connect(con);
if (ret < 0)
diff --git a/net/ceph/mon_client.c b/net/ceph/mon_client.c
index 10d6008..d0649a9 100644
--- a/net/ceph/mon_client.c
+++ b/net/ceph/mon_client.c
@@ -847,6 +847,14 @@
mutex_unlock(&monc->mutex);
+ /*
+ * flush msgr queue before we destroy ourselves to ensure that:
+ * - any work that references our embedded con is finished.
+ * - any osd_client or other work that may reference an authorizer
+ * finishes before we shut down the auth subsystem.
+ */
+ ceph_msgr_flush();
+
ceph_auth_destroy(monc->auth);
ceph_msg_put(monc->m_auth);
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 1ffebed..ca59e66 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -139,15 +139,15 @@
if (req->r_request)
ceph_msg_put(req->r_request);
- if (req->r_reply)
- ceph_msg_put(req->r_reply);
if (req->r_con_filling_msg) {
dout("release_request revoking pages %p from con %p\n",
req->r_pages, req->r_con_filling_msg);
ceph_con_revoke_message(req->r_con_filling_msg,
req->r_reply);
- ceph_con_put(req->r_con_filling_msg);
+ req->r_con_filling_msg->ops->put(req->r_con_filling_msg);
}
+ if (req->r_reply)
+ ceph_msg_put(req->r_reply);
if (req->r_own_pages)
ceph_release_page_vector(req->r_pages,
req->r_num_pages);
@@ -1216,7 +1216,7 @@
if (req->r_con_filling_msg == con && req->r_reply == msg) {
dout(" dropping con_filling_msg ref %p\n", con);
req->r_con_filling_msg = NULL;
- ceph_con_put(con);
+ con->ops->put(con);
}
if (!req->r_got_reply) {
@@ -2028,7 +2028,7 @@
dout("get_reply revoking msg %p from old con %p\n",
req->r_reply, req->r_con_filling_msg);
ceph_con_revoke_message(req->r_con_filling_msg, req->r_reply);
- ceph_con_put(req->r_con_filling_msg);
+ req->r_con_filling_msg->ops->put(req->r_con_filling_msg);
req->r_con_filling_msg = NULL;
}
@@ -2063,7 +2063,7 @@
#endif
}
*skip = 0;
- req->r_con_filling_msg = ceph_con_get(con);
+ req->r_con_filling_msg = con->ops->get(con);
dout("get_reply tid %lld %p\n", tid, m);
out:
diff --git a/net/core/dev.c b/net/core/dev.c
index cd09819..1cb0d8a 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1136,8 +1136,8 @@
no_module = request_module("netdev-%s", name);
if (no_module && capable(CAP_SYS_MODULE)) {
if (!request_module("%s", name))
- pr_err("Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-%s instead.\n",
- name);
+ pr_warn("Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-%s instead.\n",
+ name);
}
}
EXPORT_SYMBOL(dev_load);
@@ -2089,25 +2089,6 @@
return 0;
}
-/*
- * Try to orphan skb early, right before transmission by the device.
- * We cannot orphan skb if tx timestamp is requested or the sk-reference
- * is needed on driver level for other reasons, e.g. see net/can/raw.c
- */
-static inline void skb_orphan_try(struct sk_buff *skb)
-{
- struct sock *sk = skb->sk;
-
- if (sk && !skb_shinfo(skb)->tx_flags) {
- /* skb_tx_hash() wont be able to get sk.
- * We copy sk_hash into skb->rxhash
- */
- if (!skb->rxhash)
- skb->rxhash = sk->sk_hash;
- skb_orphan(skb);
- }
-}
-
static bool can_checksum_protocol(netdev_features_t features, __be16 protocol)
{
return ((features & NETIF_F_GEN_CSUM) ||
@@ -2193,8 +2174,6 @@
if (!list_empty(&ptype_all))
dev_queue_xmit_nit(skb, dev);
- skb_orphan_try(skb);
-
features = netif_skb_features(skb);
if (vlan_tx_tag_present(skb) &&
@@ -2304,7 +2283,7 @@
if (skb->sk && skb->sk->sk_hash)
hash = skb->sk->sk_hash;
else
- hash = (__force u16) skb->protocol ^ skb->rxhash;
+ hash = (__force u16) skb->protocol;
hash = jhash_1word(hash, hashrnd);
return (u16) (((u64) hash * qcount) >> 32) + qoffset;
@@ -2465,8 +2444,12 @@
{
struct netprio_map *map = rcu_dereference_bh(skb->dev->priomap);
- if ((!skb->priority) && (skb->sk) && map)
- skb->priority = map->priomap[skb->sk->sk_cgrp_prioidx];
+ if (!skb->priority && skb->sk && map) {
+ unsigned int prioidx = skb->sk->sk_cgrp_prioidx;
+
+ if (prioidx < map->priomap_len)
+ skb->priority = map->priomap[prioidx];
+ }
}
#else
#define skb_update_prio(skb)
@@ -6300,7 +6283,8 @@
/* Initialize per network namespace state */
static int __net_init netdev_init(struct net *net)
{
- INIT_LIST_HEAD(&net->dev_base_head);
+ if (net != &init_net)
+ INIT_LIST_HEAD(&net->dev_base_head);
net->dev_name_head = netdev_create_hash();
if (net->dev_name_head == NULL)
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index ea5fb9f..d23b668 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -36,9 +36,6 @@
#define TRACE_ON 1
#define TRACE_OFF 0
-static void send_dm_alert(struct work_struct *unused);
-
-
/*
* Globals, our netlink socket pointer
* and the work handle that will send up
@@ -48,11 +45,10 @@
static DEFINE_MUTEX(trace_state_mutex);
struct per_cpu_dm_data {
- struct work_struct dm_alert_work;
- struct sk_buff __rcu *skb;
- atomic_t dm_hit_count;
- struct timer_list send_timer;
- int cpu;
+ spinlock_t lock;
+ struct sk_buff *skb;
+ struct work_struct dm_alert_work;
+ struct timer_list send_timer;
};
struct dm_hw_stat_delta {
@@ -78,13 +74,13 @@
static unsigned long dm_hw_check_delta = 2*HZ;
static LIST_HEAD(hw_stats_list);
-static void reset_per_cpu_data(struct per_cpu_dm_data *data)
+static struct sk_buff *reset_per_cpu_data(struct per_cpu_dm_data *data)
{
size_t al;
struct net_dm_alert_msg *msg;
struct nlattr *nla;
struct sk_buff *skb;
- struct sk_buff *oskb = rcu_dereference_protected(data->skb, 1);
+ unsigned long flags;
al = sizeof(struct net_dm_alert_msg);
al += dm_hit_limit * sizeof(struct net_dm_drop_point);
@@ -99,65 +95,40 @@
sizeof(struct net_dm_alert_msg));
msg = nla_data(nla);
memset(msg, 0, al);
- } else
- schedule_work_on(data->cpu, &data->dm_alert_work);
-
- /*
- * Don't need to lock this, since we are guaranteed to only
- * run this on a single cpu at a time.
- * Note also that we only update data->skb if the old and new skb
- * pointers don't match. This ensures that we don't continually call
- * synchornize_rcu if we repeatedly fail to alloc a new netlink message.
- */
- if (skb != oskb) {
- rcu_assign_pointer(data->skb, skb);
-
- synchronize_rcu();
-
- atomic_set(&data->dm_hit_count, dm_hit_limit);
+ } else {
+ mod_timer(&data->send_timer, jiffies + HZ / 10);
}
+ spin_lock_irqsave(&data->lock, flags);
+ swap(data->skb, skb);
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ return skb;
}
-static void send_dm_alert(struct work_struct *unused)
+static void send_dm_alert(struct work_struct *work)
{
struct sk_buff *skb;
- struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data);
+ struct per_cpu_dm_data *data;
- WARN_ON_ONCE(data->cpu != smp_processor_id());
+ data = container_of(work, struct per_cpu_dm_data, dm_alert_work);
- /*
- * Grab the skb we're about to send
- */
- skb = rcu_dereference_protected(data->skb, 1);
+ skb = reset_per_cpu_data(data);
- /*
- * Replace it with a new one
- */
- reset_per_cpu_data(data);
-
- /*
- * Ship it!
- */
if (skb)
genlmsg_multicast(skb, 0, NET_DM_GRP_ALERT, GFP_KERNEL);
-
- put_cpu_var(dm_cpu_data);
}
/*
* This is the timer function to delay the sending of an alert
* in the event that more drops will arrive during the
- * hysteresis period. Note that it operates under the timer interrupt
- * so we don't need to disable preemption here
+ * hysteresis period.
*/
-static void sched_send_work(unsigned long unused)
+static void sched_send_work(unsigned long _data)
{
- struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data);
+ struct per_cpu_dm_data *data = (struct per_cpu_dm_data *)_data;
- schedule_work_on(smp_processor_id(), &data->dm_alert_work);
-
- put_cpu_var(dm_cpu_data);
+ schedule_work(&data->dm_alert_work);
}
static void trace_drop_common(struct sk_buff *skb, void *location)
@@ -167,33 +138,28 @@
struct nlattr *nla;
int i;
struct sk_buff *dskb;
- struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data);
+ struct per_cpu_dm_data *data;
+ unsigned long flags;
-
- rcu_read_lock();
- dskb = rcu_dereference(data->skb);
+ local_irq_save(flags);
+ data = &__get_cpu_var(dm_cpu_data);
+ spin_lock(&data->lock);
+ dskb = data->skb;
if (!dskb)
goto out;
- if (!atomic_add_unless(&data->dm_hit_count, -1, 0)) {
- /*
- * we're already at zero, discard this hit
- */
- goto out;
- }
-
nlh = (struct nlmsghdr *)dskb->data;
nla = genlmsg_data(nlmsg_data(nlh));
msg = nla_data(nla);
for (i = 0; i < msg->entries; i++) {
if (!memcmp(&location, msg->points[i].pc, sizeof(void *))) {
msg->points[i].count++;
- atomic_inc(&data->dm_hit_count);
goto out;
}
}
-
+ if (msg->entries == dm_hit_limit)
+ goto out;
/*
* We need to create a new entry
*/
@@ -205,13 +171,11 @@
if (!timer_pending(&data->send_timer)) {
data->send_timer.expires = jiffies + dm_delay * HZ;
- add_timer_on(&data->send_timer, smp_processor_id());
+ add_timer(&data->send_timer);
}
out:
- rcu_read_unlock();
- put_cpu_var(dm_cpu_data);
- return;
+ spin_unlock_irqrestore(&data->lock, flags);
}
static void trace_kfree_skb_hit(void *ignore, struct sk_buff *skb, void *location)
@@ -418,11 +382,11 @@
for_each_possible_cpu(cpu) {
data = &per_cpu(dm_cpu_data, cpu);
- data->cpu = cpu;
INIT_WORK(&data->dm_alert_work, send_dm_alert);
init_timer(&data->send_timer);
- data->send_timer.data = cpu;
+ data->send_timer.data = (unsigned long)data;
data->send_timer.function = sched_send_work;
+ spin_lock_init(&data->lock);
reset_per_cpu_data(data);
}
diff --git a/net/core/filter.c b/net/core/filter.c
index a3eddb5..d4ce2dc 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -616,9 +616,9 @@
/**
* sk_unattached_filter_create - create an unattached filter
* @fprog: the filter program
- * @sk: the socket to use
+ * @pfp: the unattached filter that is created
*
- * Create a filter independent ofr any socket. We first run some
+ * Create a filter independent of any socket. We first run some
* sanity checks on it to make sure it does not explode on us later.
* If an error occurs or there is insufficient memory for the filter
* a negative errno code is returned. On success the return is zero.
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index eb09f8b..d81d026 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -2219,9 +2219,7 @@
rcu_read_lock_bh();
nht = rcu_dereference_bh(tbl->nht);
- for (h = 0; h < (1 << nht->hash_shift); h++) {
- if (h < s_h)
- continue;
+ for (h = s_h; h < (1 << nht->hash_shift); h++) {
if (h > s_h)
s_idx = 0;
for (n = rcu_dereference_bh(nht->hash_buckets[h]), idx = 0;
@@ -2260,9 +2258,7 @@
read_lock_bh(&tbl->lock);
- for (h = 0; h <= PNEIGH_HASHMASK; h++) {
- if (h < s_h)
- continue;
+ for (h = s_h; h <= PNEIGH_HASHMASK; h++) {
if (h > s_h)
s_idx = 0;
for (n = tbl->phash_buckets[h], idx = 0; n; n = n->next) {
@@ -2297,7 +2293,7 @@
struct neigh_table *tbl;
int t, family, s_t;
int proxy = 0;
- int err = 0;
+ int err;
read_lock(&neigh_tbl_lock);
family = ((struct rtgenmsg *) nlmsg_data(cb->nlh))->rtgen_family;
@@ -2311,7 +2307,7 @@
s_t = cb->args[0];
- for (tbl = neigh_tables, t = 0; tbl && (err >= 0);
+ for (tbl = neigh_tables, t = 0; tbl;
tbl = tbl->next, t++) {
if (t < s_t || (family && tbl->family != family))
continue;
@@ -2322,6 +2318,8 @@
err = pneigh_dump_table(tbl, skb, cb);
else
err = neigh_dump_table(tbl, skb, cb);
+ if (err < 0)
+ break;
}
read_unlock(&neigh_tbl_lock);
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index dddbacb..42f1e1c 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -27,7 +27,9 @@
LIST_HEAD(net_namespace_list);
EXPORT_SYMBOL_GPL(net_namespace_list);
-struct net init_net;
+struct net init_net = {
+ .dev_base_head = LIST_HEAD_INIT(init_net.dev_base_head),
+};
EXPORT_SYMBOL(init_net);
#define INITIAL_NET_GEN_PTRS 13 /* +1 for len +2 for rcu_head */
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 3d84fb9..f9f40b9 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -362,22 +362,23 @@
void netpoll_send_udp(struct netpoll *np, const char *msg, int len)
{
- int total_len, eth_len, ip_len, udp_len;
+ int total_len, ip_len, udp_len;
struct sk_buff *skb;
struct udphdr *udph;
struct iphdr *iph;
struct ethhdr *eth;
udp_len = len + sizeof(*udph);
- ip_len = eth_len = udp_len + sizeof(*iph);
- total_len = eth_len + ETH_HLEN + NET_IP_ALIGN;
+ ip_len = udp_len + sizeof(*iph);
+ total_len = ip_len + LL_RESERVED_SPACE(np->dev);
- skb = find_skb(np, total_len, total_len - len);
+ skb = find_skb(np, total_len + np->dev->needed_tailroom,
+ total_len - len);
if (!skb)
return;
skb_copy_to_linear_data(skb, msg, len);
- skb->len += len;
+ skb_put(skb, len);
skb_push(skb, sizeof(*udph));
skb_reset_transport_header(skb);
diff --git a/net/core/netprio_cgroup.c b/net/core/netprio_cgroup.c
index 5b8aa2f..b2e9caa 100644
--- a/net/core/netprio_cgroup.c
+++ b/net/core/netprio_cgroup.c
@@ -49,8 +49,9 @@
return -ENOSPC;
}
set_bit(prioidx, prioidx_map);
+ if (atomic_read(&max_prioidx) < prioidx)
+ atomic_set(&max_prioidx, prioidx);
spin_unlock_irqrestore(&prioidx_map_lock, flags);
- atomic_set(&max_prioidx, prioidx);
*prio = prioidx;
return 0;
}
@@ -64,7 +65,7 @@
spin_unlock_irqrestore(&prioidx_map_lock, flags);
}
-static void extend_netdev_table(struct net_device *dev, u32 new_len)
+static int extend_netdev_table(struct net_device *dev, u32 new_len)
{
size_t new_size = sizeof(struct netprio_map) +
((sizeof(u32) * new_len));
@@ -76,7 +77,7 @@
if (!new_priomap) {
pr_warn("Unable to alloc new priomap!\n");
- return;
+ return -ENOMEM;
}
for (i = 0;
@@ -89,46 +90,79 @@
rcu_assign_pointer(dev->priomap, new_priomap);
if (old_priomap)
kfree_rcu(old_priomap, rcu);
+ return 0;
}
-static void update_netdev_tables(void)
+static int write_update_netdev_table(struct net_device *dev)
{
- struct net_device *dev;
- u32 max_len = atomic_read(&max_prioidx) + 1;
+ int ret = 0;
+ u32 max_len;
struct netprio_map *map;
rtnl_lock();
+ max_len = atomic_read(&max_prioidx) + 1;
+ map = rtnl_dereference(dev->priomap);
+ if (!map || map->priomap_len < max_len)
+ ret = extend_netdev_table(dev, max_len);
+ rtnl_unlock();
+
+ return ret;
+}
+
+static int update_netdev_tables(void)
+{
+ int ret = 0;
+ struct net_device *dev;
+ u32 max_len;
+ struct netprio_map *map;
+
+ rtnl_lock();
+ max_len = atomic_read(&max_prioidx) + 1;
for_each_netdev(&init_net, dev) {
map = rtnl_dereference(dev->priomap);
- if ((!map) ||
- (map->priomap_len < max_len))
- extend_netdev_table(dev, max_len);
+ /*
+ * don't allocate priomap if we didn't
+ * change net_prio.ifpriomap (map == NULL),
+ * this will speed up skb_update_prio.
+ */
+ if (map && map->priomap_len < max_len) {
+ ret = extend_netdev_table(dev, max_len);
+ if (ret < 0)
+ break;
+ }
}
rtnl_unlock();
+ return ret;
}
static struct cgroup_subsys_state *cgrp_create(struct cgroup *cgrp)
{
struct cgroup_netprio_state *cs;
- int ret;
+ int ret = -EINVAL;
cs = kzalloc(sizeof(*cs), GFP_KERNEL);
if (!cs)
return ERR_PTR(-ENOMEM);
- if (cgrp->parent && cgrp_netprio_state(cgrp->parent)->prioidx) {
- kfree(cs);
- return ERR_PTR(-EINVAL);
- }
+ if (cgrp->parent && cgrp_netprio_state(cgrp->parent)->prioidx)
+ goto out;
ret = get_prioidx(&cs->prioidx);
- if (ret != 0) {
+ if (ret < 0) {
pr_warn("No space in priority index array\n");
- kfree(cs);
- return ERR_PTR(ret);
+ goto out;
+ }
+
+ ret = update_netdev_tables();
+ if (ret < 0) {
+ put_prioidx(cs->prioidx);
+ goto out;
}
return &cs->css;
+out:
+ kfree(cs);
+ return ERR_PTR(ret);
}
static void cgrp_destroy(struct cgroup *cgrp)
@@ -141,7 +175,7 @@
rtnl_lock();
for_each_netdev(&init_net, dev) {
map = rtnl_dereference(dev->priomap);
- if (map)
+ if (map && cs->prioidx < map->priomap_len)
map->priomap[cs->prioidx] = 0;
}
rtnl_unlock();
@@ -165,7 +199,7 @@
rcu_read_lock();
for_each_netdev_rcu(&init_net, dev) {
map = rcu_dereference(dev->priomap);
- priority = map ? map->priomap[prioidx] : 0;
+ priority = (map && prioidx < map->priomap_len) ? map->priomap[prioidx] : 0;
cb->fill(cb, dev->name, priority);
}
rcu_read_unlock();
@@ -220,13 +254,17 @@
if (!dev)
goto out_free_devname;
- update_netdev_tables();
- ret = 0;
+ ret = write_update_netdev_table(dev);
+ if (ret < 0)
+ goto out_put_dev;
+
rcu_read_lock();
map = rcu_dereference(dev->priomap);
if (map)
map->priomap[prioidx] = priority;
rcu_read_unlock();
+
+out_put_dev:
dev_put(dev);
out_free_devname:
diff --git a/net/core/scm.c b/net/core/scm.c
index 611c5ef..8f6ccfd 100644
--- a/net/core/scm.c
+++ b/net/core/scm.c
@@ -109,25 +109,9 @@
if (fpl) {
scm->fp = NULL;
- if (current->scm_work_list) {
- list_add_tail(&fpl->list, current->scm_work_list);
- } else {
- LIST_HEAD(work_list);
-
- current->scm_work_list = &work_list;
-
- list_add(&fpl->list, &work_list);
- while (!list_empty(&work_list)) {
- fpl = list_first_entry(&work_list, struct scm_fp_list, list);
-
- list_del(&fpl->list);
- for (i=fpl->count-1; i>=0; i--)
- fput(fpl->fp[i]);
- kfree(fpl);
- }
-
- current->scm_work_list = NULL;
- }
+ for (i=fpl->count-1; i>=0; i--)
+ fput(fpl->fp[i]);
+ kfree(fpl);
}
}
EXPORT_SYMBOL(__scm_destroy);
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 016694d..d124306 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -353,7 +353,7 @@
unsigned int fragsz = SKB_DATA_ALIGN(length + NET_SKB_PAD) +
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
- if (fragsz <= PAGE_SIZE && !(gfp_mask & __GFP_WAIT)) {
+ if (fragsz <= PAGE_SIZE && !(gfp_mask & (__GFP_WAIT | GFP_DMA))) {
void *data = netdev_alloc_frag(fragsz);
if (likely(data)) {
@@ -1755,6 +1755,7 @@
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = MAX_SKB_FRAGS,
.flags = flags,
.ops = &sock_pipe_buf_ops,
.spd_release = sock_spd_release,
@@ -3361,7 +3362,7 @@
* @to: prior buffer
* @from: buffer to add
* @fragstolen: pointer to boolean
- *
+ * @delta_truesize: how much more was allocated than was requested
*/
bool skb_try_coalesce(struct sk_buff *to, struct sk_buff *from,
bool *fragstolen, int *delta_truesize)
diff --git a/net/ieee802154/dgram.c b/net/ieee802154/dgram.c
index 6fbb2ad..1670561 100644
--- a/net/ieee802154/dgram.c
+++ b/net/ieee802154/dgram.c
@@ -230,6 +230,12 @@
mtu = dev->mtu;
pr_debug("name = %s, mtu = %u\n", dev->name, mtu);
+ if (size > mtu) {
+ pr_debug("size = %Zu, mtu = %u\n", size, mtu);
+ err = -EINVAL;
+ goto out_dev;
+ }
+
hlen = LL_RESERVED_SPACE(dev);
tlen = dev->needed_tailroom;
skb = sock_alloc_send_skb(sk, hlen + tlen + size,
@@ -258,12 +264,6 @@
if (err < 0)
goto out_skb;
- if (size > mtu) {
- pr_debug("size = %Zu, mtu = %u\n", size, mtu);
- err = -EINVAL;
- goto out_skb;
- }
-
skb->dev = dev;
skb->sk = sk;
skb->protocol = htons(ETH_P_IEEE802154);
diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
index c48adc5..667c1d4 100644
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -1725,8 +1725,10 @@
case CIPSO_V4_TAG_LOCAL:
/* This is a non-standard tag that we only allow for
* local connections, so if the incoming interface is
- * not the loopback device drop the packet. */
- if (!(skb->dev->flags & IFF_LOOPBACK)) {
+ * not the loopback device drop the packet. Further,
+ * there is no legitimate reason for setting this from
+ * userspace so reject it if skb is NULL. */
+ if (skb == NULL || !(skb->dev->flags & IFF_LOOPBACK)) {
err_offset = opt_iter;
goto validate_return_locked;
}
diff --git a/net/ipv4/inetpeer.c b/net/ipv4/inetpeer.c
index d4d61b6..dfba343 100644
--- a/net/ipv4/inetpeer.c
+++ b/net/ipv4/inetpeer.c
@@ -560,6 +560,17 @@
}
EXPORT_SYMBOL(inet_peer_xrlim_allow);
+static void inetpeer_inval_rcu(struct rcu_head *head)
+{
+ struct inet_peer *p = container_of(head, struct inet_peer, gc_rcu);
+
+ spin_lock_bh(&gc_lock);
+ list_add_tail(&p->gc_list, &gc_list);
+ spin_unlock_bh(&gc_lock);
+
+ schedule_delayed_work(&gc_work, gc_delay);
+}
+
void inetpeer_invalidate_tree(int family)
{
struct inet_peer *old, *new, *prev;
@@ -576,10 +587,7 @@
prev = cmpxchg(&base->root, old, new);
if (prev == old) {
base->total = 0;
- spin_lock(&gc_lock);
- list_add_tail(&prev->gc_list, &gc_list);
- spin_unlock(&gc_lock);
- schedule_delayed_work(&gc_work, gc_delay);
+ call_rcu(&prev->gc_rcu, inetpeer_inval_rcu);
}
out:
diff --git a/net/ipv4/ip_forward.c b/net/ipv4/ip_forward.c
index e5c44fc..ab09b12 100644
--- a/net/ipv4/ip_forward.c
+++ b/net/ipv4/ip_forward.c
@@ -44,6 +44,7 @@
struct ip_options *opt = &(IPCB(skb)->opt);
IP_INC_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_OUTFORWDATAGRAMS);
+ IP_ADD_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_OUTOCTETS, skb->len);
if (unlikely(opt->optlen))
ip_forward_options(skb);
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index a9e519a..c94bbc6 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -1574,6 +1574,7 @@
struct ip_options *opt = &(IPCB(skb)->opt);
IP_INC_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_OUTFORWDATAGRAMS);
+ IP_ADD_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_OUTOCTETS, skb->len);
if (unlikely(opt->optlen))
ip_forward_options(skb);
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 0c220a4..6083276 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -1349,8 +1349,8 @@
if (w->leaf && fn->fn_flags & RTN_RTINFO) {
int err;
- if (w->count < w->skip) {
- w->count++;
+ if (w->skip) {
+ w->skip--;
continue;
}
@@ -1561,7 +1561,7 @@
neigh_flags = neigh->flags;
neigh_release(neigh);
}
- if (neigh_flags & NTF_ROUTER) {
+ if (!(neigh_flags & NTF_ROUTER)) {
RT6_TRACE("purging route %p via non-router but gateway\n",
rt);
return -1;
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 17b8c67..decc21d1 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -526,6 +526,7 @@
hdr->hop_limit--;
IP6_INC_STATS_BH(net, ip6_dst_idev(dst), IPSTATS_MIB_OUTFORWDATAGRAMS);
+ IP6_ADD_STATS_BH(net, ip6_dst_idev(dst), IPSTATS_MIB_OUTOCTETS, skb->len);
return NF_HOOK(NFPROTO_IPV6, NF_INET_FORWARD, skb, skb->dev, dst->dev,
ip6_forward_finish);
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index b15dc08..461e47c 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -1886,6 +1886,8 @@
{
IP6_INC_STATS_BH(dev_net(skb_dst(skb)->dev), ip6_dst_idev(skb_dst(skb)),
IPSTATS_MIB_OUTFORWDATAGRAMS);
+ IP6_ADD_STATS_BH(dev_net(skb_dst(skb)->dev), ip6_dst_idev(skb_dst(skb)),
+ IPSTATS_MIB_OUTOCTETS, skb->len);
return dst_output(skb);
}
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 999a982..becb048 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -2957,10 +2957,6 @@
net->ipv6.sysctl.ip6_rt_mtu_expires = 10*60*HZ;
net->ipv6.sysctl.ip6_rt_min_advmss = IPV6_MIN_MTU - 20 - 40;
-#ifdef CONFIG_PROC_FS
- proc_net_fops_create(net, "ipv6_route", 0, &ipv6_route_proc_fops);
- proc_net_fops_create(net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops);
-#endif
net->ipv6.ip6_rt_gc_expire = 30*HZ;
ret = 0;
@@ -2981,10 +2977,6 @@
static void __net_exit ip6_route_net_exit(struct net *net)
{
-#ifdef CONFIG_PROC_FS
- proc_net_remove(net, "ipv6_route");
- proc_net_remove(net, "rt6_stats");
-#endif
kfree(net->ipv6.ip6_null_entry);
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
kfree(net->ipv6.ip6_prohibit_entry);
@@ -2993,11 +2985,33 @@
dst_entries_destroy(&net->ipv6.ip6_dst_ops);
}
+static int __net_init ip6_route_net_init_late(struct net *net)
+{
+#ifdef CONFIG_PROC_FS
+ proc_net_fops_create(net, "ipv6_route", 0, &ipv6_route_proc_fops);
+ proc_net_fops_create(net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops);
+#endif
+ return 0;
+}
+
+static void __net_exit ip6_route_net_exit_late(struct net *net)
+{
+#ifdef CONFIG_PROC_FS
+ proc_net_remove(net, "ipv6_route");
+ proc_net_remove(net, "rt6_stats");
+#endif
+}
+
static struct pernet_operations ip6_route_net_ops = {
.init = ip6_route_net_init,
.exit = ip6_route_net_exit,
};
+static struct pernet_operations ip6_route_net_late_ops = {
+ .init = ip6_route_net_init_late,
+ .exit = ip6_route_net_exit_late,
+};
+
static struct notifier_block ip6_route_dev_notifier = {
.notifier_call = ip6_route_dev_notify,
.priority = 0,
@@ -3047,19 +3061,25 @@
if (ret)
goto xfrm6_init;
+ ret = register_pernet_subsys(&ip6_route_net_late_ops);
+ if (ret)
+ goto fib6_rules_init;
+
ret = -ENOBUFS;
if (__rtnl_register(PF_INET6, RTM_NEWROUTE, inet6_rtm_newroute, NULL, NULL) ||
__rtnl_register(PF_INET6, RTM_DELROUTE, inet6_rtm_delroute, NULL, NULL) ||
__rtnl_register(PF_INET6, RTM_GETROUTE, inet6_rtm_getroute, NULL, NULL))
- goto fib6_rules_init;
+ goto out_register_late_subsys;
ret = register_netdevice_notifier(&ip6_route_dev_notifier);
if (ret)
- goto fib6_rules_init;
+ goto out_register_late_subsys;
out:
return ret;
+out_register_late_subsys:
+ unregister_pernet_subsys(&ip6_route_net_late_ops);
fib6_rules_init:
fib6_rules_cleanup();
xfrm6_init:
@@ -3078,6 +3098,7 @@
void ip6_route_cleanup(void)
{
unregister_netdevice_notifier(&ip6_route_dev_notifier);
+ unregister_pernet_subsys(&ip6_route_net_late_ops);
fib6_rules_cleanup();
xfrm6_fini();
fib6_gc_cleanup();
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 3a9aec2..9df64a5 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1212,7 +1212,8 @@
tcp_rsk(req)->snt_isn = isn;
tcp_rsk(req)->snt_synack = tcp_time_stamp;
- security_inet_conn_request(sk, skb, req);
+ if (security_inet_conn_request(sk, skb, req))
+ goto drop_and_release;
if (tcp_v6_send_synack(sk, req,
(struct request_values *)&tmp_ext,
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index 07d7d55..cd6f7a9 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -372,7 +372,6 @@
skb_trim(skb, skb->dev->mtu);
}
skb->protocol = ETH_P_AF_IUCV;
- skb_shinfo(skb)->tx_flags |= SKBTX_DRV_NEEDS_SK_REF;
nskb = skb_clone(skb, GFP_ATOMIC);
if (!nskb)
return -ENOMEM;
diff --git a/net/l2tp/l2tp_eth.c b/net/l2tp/l2tp_eth.c
index 443591d..47b259f 100644
--- a/net/l2tp/l2tp_eth.c
+++ b/net/l2tp/l2tp_eth.c
@@ -42,6 +42,11 @@
struct sock *tunnel_sock;
struct l2tp_session *session;
struct list_head list;
+ atomic_long_t tx_bytes;
+ atomic_long_t tx_packets;
+ atomic_long_t rx_bytes;
+ atomic_long_t rx_packets;
+ atomic_long_t rx_errors;
};
/* via l2tp_session_priv() */
@@ -88,24 +93,40 @@
struct l2tp_eth *priv = netdev_priv(dev);
struct l2tp_session *session = priv->session;
+ atomic_long_add(skb->len, &priv->tx_bytes);
+ atomic_long_inc(&priv->tx_packets);
+
l2tp_xmit_skb(session, skb, session->hdr_len);
- dev->stats.tx_bytes += skb->len;
- dev->stats.tx_packets++;
-
- return 0;
+ return NETDEV_TX_OK;
}
+static struct rtnl_link_stats64 *l2tp_eth_get_stats64(struct net_device *dev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct l2tp_eth *priv = netdev_priv(dev);
+
+ stats->tx_bytes = atomic_long_read(&priv->tx_bytes);
+ stats->tx_packets = atomic_long_read(&priv->tx_packets);
+ stats->rx_bytes = atomic_long_read(&priv->rx_bytes);
+ stats->rx_packets = atomic_long_read(&priv->rx_packets);
+ stats->rx_errors = atomic_long_read(&priv->rx_errors);
+ return stats;
+}
+
+
static struct net_device_ops l2tp_eth_netdev_ops = {
.ndo_init = l2tp_eth_dev_init,
.ndo_uninit = l2tp_eth_dev_uninit,
.ndo_start_xmit = l2tp_eth_dev_xmit,
+ .ndo_get_stats64 = l2tp_eth_get_stats64,
};
static void l2tp_eth_dev_setup(struct net_device *dev)
{
ether_setup(dev);
- dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+ dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+ dev->features |= NETIF_F_LLTX;
dev->netdev_ops = &l2tp_eth_netdev_ops;
dev->destructor = free_netdev;
}
@@ -114,17 +135,17 @@
{
struct l2tp_eth_sess *spriv = l2tp_session_priv(session);
struct net_device *dev = spriv->dev;
+ struct l2tp_eth *priv = netdev_priv(dev);
if (session->debug & L2TP_MSG_DATA) {
unsigned int length;
- u8 *ptr = skb->data;
length = min(32u, skb->len);
if (!pskb_may_pull(skb, length))
goto error;
pr_debug("%s: eth recv\n", session->name);
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, ptr, length);
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, skb->data, length);
}
if (!pskb_may_pull(skb, sizeof(ETH_HLEN)))
@@ -139,15 +160,15 @@
nf_reset(skb);
if (dev_forward_skb(dev, skb) == NET_RX_SUCCESS) {
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += data_len;
- } else
- dev->stats.rx_errors++;
-
+ atomic_long_inc(&priv->rx_packets);
+ atomic_long_add(data_len, &priv->rx_bytes);
+ } else {
+ atomic_long_inc(&priv->rx_errors);
+ }
return;
error:
- dev->stats.rx_errors++;
+ atomic_long_inc(&priv->rx_errors);
kfree_skb(skb);
}
@@ -162,6 +183,7 @@
if (dev) {
unregister_netdev(dev);
spriv->dev = NULL;
+ module_put(THIS_MODULE);
}
}
}
@@ -249,6 +271,7 @@
if (rc < 0)
goto out_del_dev;
+ __module_get(THIS_MODULE);
/* Must be done after register_netdev() */
strlcpy(session->ifname, dev->name, IFNAMSIZ);
diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c
index 70614e7..61d8b75 100644
--- a/net/l2tp/l2tp_ip.c
+++ b/net/l2tp/l2tp_ip.c
@@ -464,10 +464,12 @@
sk->sk_bound_dev_if);
if (IS_ERR(rt))
goto no_route;
- if (connected)
+ if (connected) {
sk_setup_caps(sk, &rt->dst);
- else
- dst_release(&rt->dst); /* safe since we hold rcu_read_lock */
+ } else {
+ skb_dst_set(skb, &rt->dst);
+ goto xmit;
+ }
}
/* We dont need to clone dst here, it is guaranteed to not disappear.
@@ -475,6 +477,7 @@
*/
skb_dst_set_noref(skb, &rt->dst);
+xmit:
/* Queue the packet to IP for output */
rc = ip_queue_xmit(skb, &inet->cork.fl);
rcu_read_unlock();
diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 26ddb69..c649188 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -145,15 +145,20 @@
struct tid_ampdu_rx *tid_rx;
unsigned long timeout;
+ rcu_read_lock();
tid_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[*ptid]);
- if (!tid_rx)
+ if (!tid_rx) {
+ rcu_read_unlock();
return;
+ }
timeout = tid_rx->last_rx + TU_TO_JIFFIES(tid_rx->timeout);
if (time_is_after_jiffies(timeout)) {
mod_timer(&tid_rx->session_timer, timeout);
+ rcu_read_unlock();
return;
}
+ rcu_read_unlock();
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "rx session timer expired on tid %d\n", (u16)*ptid);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 495831e..7d5108a 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -533,16 +533,16 @@
sinfo.filled = 0;
sta_set_sinfo(sta, &sinfo);
- if (sinfo.filled | STATION_INFO_TX_BITRATE)
+ if (sinfo.filled & STATION_INFO_TX_BITRATE)
data[i] = 100000 *
cfg80211_calculate_bitrate(&sinfo.txrate);
i++;
- if (sinfo.filled | STATION_INFO_RX_BITRATE)
+ if (sinfo.filled & STATION_INFO_RX_BITRATE)
data[i] = 100000 *
cfg80211_calculate_bitrate(&sinfo.rxrate);
i++;
- if (sinfo.filled | STATION_INFO_SIGNAL_AVG)
+ if (sinfo.filled & STATION_INFO_SIGNAL_AVG)
data[i] = (u8)sinfo.signal_avg;
i++;
} else {
@@ -2093,6 +2093,9 @@
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
int i, ret;
+ if (!ieee80211_sdata_running(sdata))
+ return -ENETDOWN;
+
if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) {
ret = drv_set_bitrate_mask(local, sdata, mask);
if (ret)
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index d4c19a7..8664111 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -637,6 +637,18 @@
ieee80211_configure_filter(local);
break;
default:
+ mutex_lock(&local->mtx);
+ if (local->hw_roc_dev == sdata->dev &&
+ local->hw_roc_channel) {
+ /* ignore return value since this is racy */
+ drv_cancel_remain_on_channel(local);
+ ieee80211_queue_work(&local->hw, &local->hw_roc_done);
+ }
+ mutex_unlock(&local->mtx);
+
+ flush_work(&local->hw_roc_start);
+ flush_work(&local->hw_roc_done);
+
flush_work(&sdata->work);
/*
* When we get here, the interface is marked down.
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 04c3063..0db5d34 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1220,6 +1220,22 @@
sdata->vif.bss_conf.qos = true;
}
+static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
+{
+ lockdep_assert_held(&sdata->local->mtx);
+
+ sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL |
+ IEEE80211_STA_BEACON_POLL);
+ ieee80211_run_deferred_scan(sdata->local);
+}
+
+static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
+{
+ mutex_lock(&sdata->local->mtx);
+ __ieee80211_stop_poll(sdata);
+ mutex_unlock(&sdata->local->mtx);
+}
+
static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
u16 capab, bool erp_valid, u8 erp)
{
@@ -1285,8 +1301,7 @@
sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE;
/* just to be sure */
- sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL |
- IEEE80211_STA_BEACON_POLL);
+ ieee80211_stop_poll(sdata);
ieee80211_led_assoc(local, 1);
@@ -1327,7 +1342,6 @@
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
u32 changed = 0;
- u8 bssid[ETH_ALEN];
ASSERT_MGD_MTX(ifmgd);
@@ -1337,10 +1351,9 @@
if (WARN_ON(!ifmgd->associated))
return;
- memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
+ ieee80211_stop_poll(sdata);
ifmgd->associated = NULL;
- memset(ifmgd->bssid, 0, ETH_ALEN);
/*
* we need to commit the associated = NULL change because the
@@ -1360,7 +1373,7 @@
netif_carrier_off(sdata->dev);
mutex_lock(&local->sta_mtx);
- sta = sta_info_get(sdata, bssid);
+ sta = sta_info_get(sdata, ifmgd->bssid);
if (sta) {
set_sta_flag(sta, WLAN_STA_BLOCK_BA);
ieee80211_sta_tear_down_BA_sessions(sta, tx);
@@ -1369,13 +1382,16 @@
/* deauthenticate/disassociate now */
if (tx || frame_buf)
- ieee80211_send_deauth_disassoc(sdata, bssid, stype, reason,
- tx, frame_buf);
+ ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype,
+ reason, tx, frame_buf);
/* flush out frame */
if (tx)
drv_flush(local, false);
+ /* clear bssid only after building the needed mgmt frames */
+ memset(ifmgd->bssid, 0, ETH_ALEN);
+
/* remove AP and TDLS peers */
sta_info_flush(local, sdata);
@@ -1456,8 +1472,7 @@
return;
}
- ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
- IEEE80211_STA_BEACON_POLL);
+ __ieee80211_stop_poll(sdata);
mutex_lock(&local->iflist_mtx);
ieee80211_recalc_ps(local, -1);
@@ -1477,7 +1492,6 @@
round_jiffies_up(jiffies +
IEEE80211_CONNECTION_IDLE_TIME));
out:
- ieee80211_run_deferred_scan(local);
mutex_unlock(&local->mtx);
}
@@ -2160,15 +2174,13 @@
sdata->name, mgmt->sa, status_code);
ieee80211_destroy_assoc_data(sdata, false);
} else {
- printk(KERN_DEBUG "%s: associated\n", sdata->name);
-
if (!ieee80211_assoc_success(sdata, *bss, mgmt, len)) {
/* oops -- internal error -- send timeout for now */
- ieee80211_destroy_assoc_data(sdata, true);
- sta_info_destroy_addr(sdata, mgmt->bssid);
+ ieee80211_destroy_assoc_data(sdata, false);
cfg80211_put_bss(*bss);
return RX_MGMT_CFG80211_ASSOC_TIMEOUT;
}
+ printk(KERN_DEBUG "%s: associated\n", sdata->name);
/*
* destroy assoc_data afterwards, as otherwise an idle
@@ -2408,7 +2420,11 @@
net_dbg_ratelimited("%s: cancelling probereq poll due to a received beacon\n",
sdata->name);
#endif
+ mutex_lock(&local->mtx);
ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL;
+ ieee80211_run_deferred_scan(local);
+ mutex_unlock(&local->mtx);
+
mutex_lock(&local->iflist_mtx);
ieee80211_recalc_ps(local, -1);
mutex_unlock(&local->iflist_mtx);
@@ -2595,9 +2611,6 @@
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
u8 frame_buf[DEAUTH_DISASSOC_LEN];
- ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
- IEEE80211_STA_BEACON_POLL);
-
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
false, frame_buf);
mutex_unlock(&ifmgd->mtx);
@@ -2874,8 +2887,7 @@
u32 flags;
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- sdata->u.mgd.flags &= ~(IEEE80211_STA_BEACON_POLL |
- IEEE80211_STA_CONNECTION_POLL);
+ __ieee80211_stop_poll(sdata);
/* let's probe the connection once */
flags = sdata->local->hw.flags;
@@ -2944,7 +2956,10 @@
if (test_and_clear_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running))
add_timer(&ifmgd->chswitch_timer);
ieee80211_sta_reset_beacon_monitor(sdata);
+
+ mutex_lock(&sdata->local->mtx);
ieee80211_restart_sta_timer(sdata);
+ mutex_unlock(&sdata->local->mtx);
}
#endif
@@ -3106,7 +3121,7 @@
}
local->oper_channel = cbss->channel;
- ieee80211_hw_config(local, 0);
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
if (!have_sta) {
u32 rates = 0, basic_rates = 0;
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index f054e94..935aa4b 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -234,6 +234,22 @@
return;
}
+ /* was never transmitted */
+ if (local->hw_roc_skb) {
+ u64 cookie;
+
+ cookie = local->hw_roc_cookie ^ 2;
+
+ cfg80211_mgmt_tx_status(local->hw_roc_dev, cookie,
+ local->hw_roc_skb->data,
+ local->hw_roc_skb->len, false,
+ GFP_KERNEL);
+
+ kfree_skb(local->hw_roc_skb);
+ local->hw_roc_skb = NULL;
+ local->hw_roc_skb_for_status = NULL;
+ }
+
if (!local->hw_roc_for_tx)
cfg80211_remain_on_channel_expired(local->hw_roc_dev,
local->hw_roc_cookie,
diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index 2d1acc6..f9e51ef 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -809,7 +809,7 @@
max_rates = sband->n_bitrates;
}
- msp = kzalloc(sizeof(struct minstrel_ht_sta), gfp);
+ msp = kzalloc(sizeof(*msp), gfp);
if (!msp)
return NULL;
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 7bcecf7..965e6ec 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2455,7 +2455,7 @@
* frames that we didn't handle, including returning unknown
* ones. For all other modes we will return them to the sender,
* setting the 0x80 bit in the action category, as required by
- * 802.11-2007 7.3.1.11.
+ * 802.11-2012 9.24.4.
* Newer versions of hostapd shall also use the management frame
* registration mechanisms, but older ones still use cooked
* monitor interfaces so push all frames there.
@@ -2465,6 +2465,9 @@
sdata->vif.type == NL80211_IFTYPE_AP_VLAN))
return RX_DROP_MONITOR;
+ if (is_multicast_ether_addr(mgmt->da))
+ return RX_DROP_MONITOR;
+
/* do not return rejected action frames */
if (mgmt->u.action.category & 0x80)
return RX_DROP_UNUSABLE;
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index f5b1638..de455f8 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -378,7 +378,7 @@
/* make the station visible */
sta_info_hash_add(local, sta);
- list_add(&sta->list, &local->sta_list);
+ list_add_rcu(&sta->list, &local->sta_list);
set_sta_flag(sta, WLAN_STA_INSERTED);
@@ -688,7 +688,7 @@
if (ret)
return ret;
- list_del(&sta->list);
+ list_del_rcu(&sta->list);
mutex_lock(&local->key_mtx);
for (i = 0; i < NUM_DEFAULT_KEYS; i++)
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 3bb24a1..a470e11 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -271,6 +271,9 @@
* @plink_timer: peer link watch timer
* @plink_timer_was_running: used by suspend/resume to restore timers
* @t_offset: timing offset relative to this host
+ * @t_offset_setpoint: reference timing offset of this sta to be used when
+ * calculating clockdrift
+ * @ch_type: peer's channel type
* @debugfs: debug filesystem info
* @dead: set to true when sta is unlinked
* @uploaded: set to true when sta is uploaded to the driver
@@ -278,6 +281,8 @@
* @sta: station information we share with the driver
* @sta_state: duplicates information about station state (for debug)
* @beacon_loss_count: number of times beacon loss has triggered
+ * @supports_40mhz: tracks whether the station advertised 40 MHz support
+ * as we overwrite its HT parameters with the currently used value
*/
struct sta_info {
/* General information, mostly static */
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 847215b..e453212 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1737,7 +1737,7 @@
__le16 fc;
struct ieee80211_hdr hdr;
struct ieee80211s_hdr mesh_hdr __maybe_unused;
- struct mesh_path __maybe_unused *mppath = NULL;
+ struct mesh_path __maybe_unused *mppath = NULL, *mpath = NULL;
const u8 *encaps_data;
int encaps_len, skip_header_bytes;
int nh_pos, h_pos;
@@ -1803,8 +1803,11 @@
goto fail;
}
rcu_read_lock();
- if (!is_multicast_ether_addr(skb->data))
- mppath = mpp_path_lookup(skb->data, sdata);
+ if (!is_multicast_ether_addr(skb->data)) {
+ mpath = mesh_path_lookup(skb->data, sdata);
+ if (!mpath)
+ mppath = mpp_path_lookup(skb->data, sdata);
+ }
/*
* Use address extension if it is a packet from
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index a44c680..8dd4712 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1271,7 +1271,7 @@
enum ieee80211_sta_state state;
for (state = IEEE80211_STA_NOTEXIST;
- state < sta->sta_state - 1; state++)
+ state < sta->sta_state; state++)
WARN_ON(drv_sta_state(local, sta->sdata, sta,
state, state + 1));
}
diff --git a/net/mac802154/tx.c b/net/mac802154/tx.c
index 8781d8f9..434b687 100644
--- a/net/mac802154/tx.c
+++ b/net/mac802154/tx.c
@@ -83,9 +83,10 @@
{
struct xmit_work *work;
- if (!(priv->phy->channels_supported[page] & (1 << chan)))
+ if (!(priv->phy->channels_supported[page] & (1 << chan))) {
WARN_ON(1);
return NETDEV_TX_OK;
+ }
if (!(priv->hw.flags & IEEE802154_HW_OMIT_CKSUM)) {
u16 crc = crc_ccitt(0, skb->data, skb->len);
diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c
index 819c342..9730882 100644
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -640,6 +640,14 @@
}
static int
+ip_set_none(struct sock *ctnl, struct sk_buff *skb,
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const attr[])
+{
+ return -EOPNOTSUPP;
+}
+
+static int
ip_set_create(struct sock *ctnl, struct sk_buff *skb,
const struct nlmsghdr *nlh,
const struct nlattr * const attr[])
@@ -1539,6 +1547,10 @@
}
static const struct nfnl_callback ip_set_netlink_subsys_cb[IPSET_MSG_MAX] = {
+ [IPSET_CMD_NONE] = {
+ .call = ip_set_none,
+ .attr_count = IPSET_ATTR_CMD_MAX,
+ },
[IPSET_CMD_CREATE] = {
.call = ip_set_create,
.attr_count = IPSET_ATTR_CMD_MAX,
diff --git a/net/netfilter/ipset/ip_set_hash_netiface.c b/net/netfilter/ipset/ip_set_hash_netiface.c
index ee86394..d5d3607 100644
--- a/net/netfilter/ipset/ip_set_hash_netiface.c
+++ b/net/netfilter/ipset/ip_set_hash_netiface.c
@@ -38,30 +38,6 @@
#define iface_data(n) (rb_entry(n, struct iface_node, node)->iface)
-static inline long
-ifname_compare(const char *_a, const char *_b)
-{
- const long *a = (const long *)_a;
- const long *b = (const long *)_b;
-
- BUILD_BUG_ON(IFNAMSIZ > 4 * sizeof(unsigned long));
- if (a[0] != b[0])
- return a[0] - b[0];
- if (IFNAMSIZ > sizeof(long)) {
- if (a[1] != b[1])
- return a[1] - b[1];
- }
- if (IFNAMSIZ > 2 * sizeof(long)) {
- if (a[2] != b[2])
- return a[2] - b[2];
- }
- if (IFNAMSIZ > 3 * sizeof(long)) {
- if (a[3] != b[3])
- return a[3] - b[3];
- }
- return 0;
-}
-
static void
rbtree_destroy(struct rb_root *root)
{
@@ -99,7 +75,7 @@
while (n) {
const char *d = iface_data(n);
- long res = ifname_compare(*iface, d);
+ int res = strcmp(*iface, d);
if (res < 0)
n = n->rb_left;
@@ -121,7 +97,7 @@
while (*n) {
char *ifname = iface_data(*n);
- long res = ifname_compare(*iface, ifname);
+ int res = strcmp(*iface, ifname);
p = *n;
if (res < 0)
@@ -366,7 +342,7 @@
struct hash_netiface4_elem data = { .cidr = HOST_MASK };
u32 ip = 0, ip_to, last;
u32 timeout = h->timeout;
- char iface[IFNAMSIZ] = {};
+ char iface[IFNAMSIZ];
int ret;
if (unlikely(!tb[IPSET_ATTR_IP] ||
@@ -663,7 +639,7 @@
ipset_adtfn adtfn = set->variant->adt[adt];
struct hash_netiface6_elem data = { .cidr = HOST_MASK };
u32 timeout = h->timeout;
- char iface[IFNAMSIZ] = {};
+ char iface[IFNAMSIZ];
int ret;
if (unlikely(!tb[IPSET_ATTR_IP] ||
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index dd811b8..84444dd 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -76,19 +76,19 @@
#ifdef CONFIG_IP_VS_IPV6
/* Taken from rt6_fill_node() in net/ipv6/route.c, is there a better way? */
-static int __ip_vs_addr_is_local_v6(struct net *net,
- const struct in6_addr *addr)
+static bool __ip_vs_addr_is_local_v6(struct net *net,
+ const struct in6_addr *addr)
{
- struct rt6_info *rt;
struct flowi6 fl6 = {
.daddr = *addr,
};
+ struct dst_entry *dst = ip6_route_output(net, NULL, &fl6);
+ bool is_local;
- rt = (struct rt6_info *)ip6_route_output(net, NULL, &fl6);
- if (rt && rt->dst.dev && (rt->dst.dev->flags & IFF_LOOPBACK))
- return 1;
+ is_local = !dst->error && dst->dev && (dst->dev->flags & IFF_LOOPBACK);
- return 0;
+ dst_release(dst);
+ return is_local;
}
#endif
@@ -1521,11 +1521,12 @@
{
struct net_device *dev = ptr;
struct net *net = dev_net(dev);
+ struct netns_ipvs *ipvs = net_ipvs(net);
struct ip_vs_service *svc;
struct ip_vs_dest *dest;
unsigned int idx;
- if (event != NETDEV_UNREGISTER)
+ if (event != NETDEV_UNREGISTER || !ipvs)
return NOTIFY_DONE;
IP_VS_DBG(3, "%s() dev=%s\n", __func__, dev->name);
EnterFunction(2);
@@ -1551,7 +1552,7 @@
}
}
- list_for_each_entry(dest, &net_ipvs(net)->dest_trash, n_list) {
+ list_for_each_entry(dest, &ipvs->dest_trash, n_list) {
__ip_vs_dev_reset(dest, dev);
}
mutex_unlock(&__ip_vs_mutex);
diff --git a/net/netfilter/nf_conntrack_h323_main.c b/net/netfilter/nf_conntrack_h323_main.c
index 46d69d7..31f50bc 100644
--- a/net/netfilter/nf_conntrack_h323_main.c
+++ b/net/netfilter/nf_conntrack_h323_main.c
@@ -270,9 +270,8 @@
return 0;
/* RTP port is even */
- port &= htons(~1);
- rtp_port = port;
- rtcp_port = htons(ntohs(port) + 1);
+ rtp_port = port & ~htons(1);
+ rtcp_port = port | htons(1);
/* Create expect for RTP */
if ((rtp_exp = nf_ct_expect_alloc(ct)) == NULL)
diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c
index 3e797d1..791d56b 100644
--- a/net/netfilter/nfnetlink.c
+++ b/net/netfilter/nfnetlink.c
@@ -169,8 +169,10 @@
err = nla_parse(cda, ss->cb[cb_id].attr_count,
attr, attrlen, ss->cb[cb_id].policy);
- if (err < 0)
+ if (err < 0) {
+ rcu_read_unlock();
return err;
+ }
if (nc->call_rcu) {
err = nc->call_rcu(net->nfnl, skb, nlh,
diff --git a/net/netfilter/xt_HMARK.c b/net/netfilter/xt_HMARK.c
index 0a96a43..1686ca1 100644
--- a/net/netfilter/xt_HMARK.c
+++ b/net/netfilter/xt_HMARK.c
@@ -32,13 +32,13 @@
MODULE_ALIAS("ip6t_HMARK");
struct hmark_tuple {
- u32 src;
- u32 dst;
+ __be32 src;
+ __be32 dst;
union hmark_ports uports;
- uint8_t proto;
+ u8 proto;
};
-static inline u32 hmark_addr6_mask(const __u32 *addr32, const __u32 *mask)
+static inline __be32 hmark_addr6_mask(const __be32 *addr32, const __be32 *mask)
{
return (addr32[0] & mask[0]) ^
(addr32[1] & mask[1]) ^
@@ -46,8 +46,8 @@
(addr32[3] & mask[3]);
}
-static inline u32
-hmark_addr_mask(int l3num, const __u32 *addr32, const __u32 *mask)
+static inline __be32
+hmark_addr_mask(int l3num, const __be32 *addr32, const __be32 *mask)
{
switch (l3num) {
case AF_INET:
@@ -58,6 +58,22 @@
return 0;
}
+static inline void hmark_swap_ports(union hmark_ports *uports,
+ const struct xt_hmark_info *info)
+{
+ union hmark_ports hp;
+ u16 src, dst;
+
+ hp.b32 = (uports->b32 & info->port_mask.b32) | info->port_set.b32;
+ src = ntohs(hp.b16.src);
+ dst = ntohs(hp.b16.dst);
+
+ if (dst > src)
+ uports->v32 = (dst << 16) | src;
+ else
+ uports->v32 = (src << 16) | dst;
+}
+
static int
hmark_ct_set_htuple(const struct sk_buff *skb, struct hmark_tuple *t,
const struct xt_hmark_info *info)
@@ -74,22 +90,19 @@
otuple = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
rtuple = &ct->tuplehash[IP_CT_DIR_REPLY].tuple;
- t->src = hmark_addr_mask(otuple->src.l3num, otuple->src.u3.all,
- info->src_mask.all);
- t->dst = hmark_addr_mask(otuple->src.l3num, rtuple->src.u3.all,
- info->dst_mask.all);
+ t->src = hmark_addr_mask(otuple->src.l3num, otuple->src.u3.ip6,
+ info->src_mask.ip6);
+ t->dst = hmark_addr_mask(otuple->src.l3num, rtuple->src.u3.ip6,
+ info->dst_mask.ip6);
if (info->flags & XT_HMARK_FLAG(XT_HMARK_METHOD_L3))
return 0;
t->proto = nf_ct_protonum(ct);
if (t->proto != IPPROTO_ICMP) {
- t->uports.p16.src = otuple->src.u.all;
- t->uports.p16.dst = rtuple->src.u.all;
- t->uports.v32 = (t->uports.v32 & info->port_mask.v32) |
- info->port_set.v32;
- if (t->uports.p16.dst < t->uports.p16.src)
- swap(t->uports.p16.dst, t->uports.p16.src);
+ t->uports.b16.src = otuple->src.u.all;
+ t->uports.b16.dst = rtuple->src.u.all;
+ hmark_swap_ports(&t->uports, info);
}
return 0;
@@ -98,15 +111,19 @@
#endif
}
+/* This hash function is endian independent, to ensure consistent hashing if
+ * the cluster is composed of big and little endian systems. */
static inline u32
hmark_hash(struct hmark_tuple *t, const struct xt_hmark_info *info)
{
u32 hash;
+ u32 src = ntohl(t->src);
+ u32 dst = ntohl(t->dst);
- if (t->dst < t->src)
- swap(t->src, t->dst);
+ if (dst < src)
+ swap(src, dst);
- hash = jhash_3words(t->src, t->dst, t->uports.v32, info->hashrnd);
+ hash = jhash_3words(src, dst, t->uports.v32, info->hashrnd);
hash = hash ^ (t->proto & info->proto_mask);
return (((u64)hash * info->hmodulus) >> 32) + info->hoffset;
@@ -126,11 +143,7 @@
if (skb_copy_bits(skb, nhoff, &t->uports, sizeof(t->uports)) < 0)
return;
- t->uports.v32 = (t->uports.v32 & info->port_mask.v32) |
- info->port_set.v32;
-
- if (t->uports.p16.dst < t->uports.p16.src)
- swap(t->uports.p16.dst, t->uports.p16.src);
+ hmark_swap_ports(&t->uports, info);
}
#if IS_ENABLED(CONFIG_IP6_NF_IPTABLES)
@@ -178,8 +191,8 @@
return -1;
}
noicmp:
- t->src = hmark_addr6_mask(ip6->saddr.s6_addr32, info->src_mask.all);
- t->dst = hmark_addr6_mask(ip6->daddr.s6_addr32, info->dst_mask.all);
+ t->src = hmark_addr6_mask(ip6->saddr.s6_addr32, info->src_mask.ip6);
+ t->dst = hmark_addr6_mask(ip6->daddr.s6_addr32, info->dst_mask.ip6);
if (info->flags & XT_HMARK_FLAG(XT_HMARK_METHOD_L3))
return 0;
@@ -255,11 +268,8 @@
}
}
- t->src = (__force u32) ip->saddr;
- t->dst = (__force u32) ip->daddr;
-
- t->src &= info->src_mask.ip;
- t->dst &= info->dst_mask.ip;
+ t->src = ip->saddr & info->src_mask.ip;
+ t->dst = ip->daddr & info->dst_mask.ip;
if (info->flags & XT_HMARK_FLAG(XT_HMARK_METHOD_L3))
return 0;
diff --git a/net/netfilter/xt_set.c b/net/netfilter/xt_set.c
index 035960e..c6f7db7 100644
--- a/net/netfilter/xt_set.c
+++ b/net/netfilter/xt_set.c
@@ -16,6 +16,7 @@
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter/xt_set.h>
+#include <linux/netfilter/ipset/ip_set_timeout.h>
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
@@ -310,7 +311,8 @@
info->del_set.flags, 0, UINT_MAX);
/* Normalize to fit into jiffies */
- if (add_opt.timeout > UINT_MAX/MSEC_PER_SEC)
+ if (add_opt.timeout != IPSET_NO_TIMEOUT &&
+ add_opt.timeout > UINT_MAX/MSEC_PER_SEC)
add_opt.timeout = UINT_MAX/MSEC_PER_SEC;
if (info->add_set.index != IPSET_INVALID_ID)
ip_set_add(info->add_set.index, skb, par, &add_opt);
diff --git a/net/nfc/llcp/sock.c b/net/nfc/llcp/sock.c
index 3f339b1..e06d458 100644
--- a/net/nfc/llcp/sock.c
+++ b/net/nfc/llcp/sock.c
@@ -292,6 +292,9 @@
pr_debug("%p\n", sk);
+ if (llcp_sock == NULL || llcp_sock->dev == NULL)
+ return -EBADFD;
+
addr->sa_family = AF_NFC;
*len = sizeof(struct sockaddr_nfc_llcp);
diff --git a/net/nfc/nci/ntf.c b/net/nfc/nci/ntf.c
index cb26461..2ab196a 100644
--- a/net/nfc/nci/ntf.c
+++ b/net/nfc/nci/ntf.c
@@ -106,7 +106,7 @@
nfca_poll->sens_res = __le16_to_cpu(*((__u16 *)data));
data += 2;
- nfca_poll->nfcid1_len = *data++;
+ nfca_poll->nfcid1_len = min_t(__u8, *data++, NFC_NFCID1_MAXSIZE);
pr_debug("sens_res 0x%x, nfcid1_len %d\n",
nfca_poll->sens_res, nfca_poll->nfcid1_len);
@@ -130,7 +130,7 @@
struct rf_tech_specific_params_nfcb_poll *nfcb_poll,
__u8 *data)
{
- nfcb_poll->sensb_res_len = *data++;
+ nfcb_poll->sensb_res_len = min_t(__u8, *data++, NFC_SENSB_RES_MAXSIZE);
pr_debug("sensb_res_len %d\n", nfcb_poll->sensb_res_len);
@@ -145,7 +145,7 @@
__u8 *data)
{
nfcf_poll->bit_rate = *data++;
- nfcf_poll->sensf_res_len = *data++;
+ nfcf_poll->sensf_res_len = min_t(__u8, *data++, NFC_SENSF_RES_MAXSIZE);
pr_debug("bit_rate %d, sensf_res_len %d\n",
nfcf_poll->bit_rate, nfcf_poll->sensf_res_len);
@@ -331,7 +331,7 @@
switch (ntf->activation_rf_tech_and_mode) {
case NCI_NFC_A_PASSIVE_POLL_MODE:
nfca_poll = &ntf->activation_params.nfca_poll_iso_dep;
- nfca_poll->rats_res_len = *data++;
+ nfca_poll->rats_res_len = min_t(__u8, *data++, 20);
pr_debug("rats_res_len %d\n", nfca_poll->rats_res_len);
if (nfca_poll->rats_res_len > 0) {
memcpy(nfca_poll->rats_res,
@@ -341,7 +341,7 @@
case NCI_NFC_B_PASSIVE_POLL_MODE:
nfcb_poll = &ntf->activation_params.nfcb_poll_iso_dep;
- nfcb_poll->attrib_res_len = *data++;
+ nfcb_poll->attrib_res_len = min_t(__u8, *data++, 50);
pr_debug("attrib_res_len %d\n", nfcb_poll->attrib_res_len);
if (nfcb_poll->attrib_res_len > 0) {
memcpy(nfcb_poll->attrib_res,
diff --git a/net/nfc/rawsock.c b/net/nfc/rawsock.c
index ec1134c..8b8a6a2 100644
--- a/net/nfc/rawsock.c
+++ b/net/nfc/rawsock.c
@@ -54,7 +54,10 @@
{
struct sock *sk = sock->sk;
- pr_debug("sock=%p\n", sock);
+ pr_debug("sock=%p sk=%p\n", sock, sk);
+
+ if (!sk)
+ return 0;
sock_orphan(sk);
sock_put(sk);
diff --git a/net/phonet/af_phonet.c b/net/phonet/af_phonet.c
index 779ce4f..5a940db 100644
--- a/net/phonet/af_phonet.c
+++ b/net/phonet/af_phonet.c
@@ -5,8 +5,8 @@
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ * Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/net/phonet/datagram.c b/net/phonet/datagram.c
index bf35b4e..12c30f3 100644
--- a/net/phonet/datagram.c
+++ b/net/phonet/datagram.c
@@ -5,8 +5,8 @@
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ * Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/net/phonet/pep-gprs.c b/net/phonet/pep-gprs.c
index d012089..a2fba7e 100644
--- a/net/phonet/pep-gprs.c
+++ b/net/phonet/pep-gprs.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Author: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Author: Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/net/phonet/pep.c b/net/phonet/pep.c
index 9dd4f92..576f22c 100644
--- a/net/phonet/pep.c
+++ b/net/phonet/pep.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Author: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Author: Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c
index 36f75a9..5bf6341 100644
--- a/net/phonet/pn_dev.c
+++ b/net/phonet/pn_dev.c
@@ -5,8 +5,8 @@
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ * Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/net/phonet/pn_netlink.c b/net/phonet/pn_netlink.c
index cfdf135..7dd762a 100644
--- a/net/phonet/pn_netlink.c
+++ b/net/phonet/pn_netlink.c
@@ -5,8 +5,8 @@
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ * Remi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/net/phonet/socket.c b/net/phonet/socket.c
index 89cfa9c..0acc943 100644
--- a/net/phonet/socket.c
+++ b/net/phonet/socket.c
@@ -5,8 +5,8 @@
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ * Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/net/phonet/sysctl.c b/net/phonet/sysctl.c
index 696348f..d6bbbbd 100644
--- a/net/phonet/sysctl.c
+++ b/net/phonet/sysctl.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Author: Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/net/rxrpc/ar-peer.c b/net/rxrpc/ar-peer.c
index 2754f09..bebaa43 100644
--- a/net/rxrpc/ar-peer.c
+++ b/net/rxrpc/ar-peer.c
@@ -229,7 +229,7 @@
return peer;
new_UDP_peer:
- _net("Rx UDP DGRAM from NEW peer %d", peer->debug_id);
+ _net("Rx UDP DGRAM from NEW peer");
read_unlock_bh(&rxrpc_peer_lock);
_leave(" = -EBUSY [new]");
return ERR_PTR(-EBUSY);
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index a2a95aa..c412ad0 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -331,29 +331,22 @@
return PSCHED_NS2TICKS(ticks);
}
-static int tfifo_enqueue(struct sk_buff *nskb, struct Qdisc *sch)
+static void tfifo_enqueue(struct sk_buff *nskb, struct Qdisc *sch)
{
struct sk_buff_head *list = &sch->q;
psched_time_t tnext = netem_skb_cb(nskb)->time_to_send;
- struct sk_buff *skb;
+ struct sk_buff *skb = skb_peek_tail(list);
- if (likely(skb_queue_len(list) < sch->limit)) {
- skb = skb_peek_tail(list);
- /* Optimize for add at tail */
- if (likely(!skb || tnext >= netem_skb_cb(skb)->time_to_send))
- return qdisc_enqueue_tail(nskb, sch);
+ /* Optimize for add at tail */
+ if (likely(!skb || tnext >= netem_skb_cb(skb)->time_to_send))
+ return __skb_queue_tail(list, nskb);
- skb_queue_reverse_walk(list, skb) {
- if (tnext >= netem_skb_cb(skb)->time_to_send)
- break;
- }
-
- __skb_queue_after(list, skb, nskb);
- sch->qstats.backlog += qdisc_pkt_len(nskb);
- return NET_XMIT_SUCCESS;
+ skb_queue_reverse_walk(list, skb) {
+ if (tnext >= netem_skb_cb(skb)->time_to_send)
+ break;
}
- return qdisc_reshape_fail(nskb, sch);
+ __skb_queue_after(list, skb, nskb);
}
/*
@@ -368,7 +361,6 @@
/* We don't fill cb now as skb_unshare() may invalidate it */
struct netem_skb_cb *cb;
struct sk_buff *skb2;
- int ret;
int count = 1;
/* Random duplication */
@@ -419,6 +411,11 @@
skb->data[net_random() % skb_headlen(skb)] ^= 1<<(net_random() % 8);
}
+ if (unlikely(skb_queue_len(&sch->q) >= sch->limit))
+ return qdisc_reshape_fail(skb, sch);
+
+ sch->qstats.backlog += qdisc_pkt_len(skb);
+
cb = netem_skb_cb(skb);
if (q->gap == 0 || /* not doing reordering */
q->counter < q->gap - 1 || /* inside last reordering gap */
@@ -450,7 +447,7 @@
cb->time_to_send = now + delay;
++q->counter;
- ret = tfifo_enqueue(skb, sch);
+ tfifo_enqueue(skb, sch);
} else {
/*
* Do re-ordering by putting one out of N packets at the front
@@ -460,16 +457,7 @@
q->counter = 0;
__skb_queue_head(&sch->q, skb);
- sch->qstats.backlog += qdisc_pkt_len(skb);
sch->qstats.requeues++;
- ret = NET_XMIT_SUCCESS;
- }
-
- if (ret != NET_XMIT_SUCCESS) {
- if (net_xmit_drop_count(ret)) {
- sch->qstats.drops++;
- return ret;
- }
}
return NET_XMIT_SUCCESS;
diff --git a/net/sched/sch_sfb.c b/net/sched/sch_sfb.c
index 74305c8..30ea467 100644
--- a/net/sched/sch_sfb.c
+++ b/net/sched/sch_sfb.c
@@ -570,6 +570,8 @@
sch->qstats.backlog = q->qdisc->qstats.backlog;
opts = nla_nest_start(skb, TCA_OPTIONS);
+ if (opts == NULL)
+ goto nla_put_failure;
if (nla_put(skb, TCA_SFB_PARMS, sizeof(opt), &opt))
goto nla_put_failure;
return nla_nest_end(skb, opts);
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 5bc9ab1..b16517e 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -271,6 +271,7 @@
*/
asoc->peer.sack_needed = 1;
asoc->peer.sack_cnt = 0;
+ asoc->peer.sack_generation = 1;
/* Assume that the peer will tell us if he recognizes ASCONF
* as part of INIT exchange.
diff --git a/net/sctp/input.c b/net/sctp/input.c
index 80564fe..8b9b679 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -736,15 +736,12 @@
epb = &ep->base;
- if (hlist_unhashed(&epb->node))
- return;
-
epb->hashent = sctp_ep_hashfn(epb->bind_addr.port);
head = &sctp_ep_hashtable[epb->hashent];
sctp_write_lock(&head->lock);
- __hlist_del(&epb->node);
+ hlist_del_init(&epb->node);
sctp_write_unlock(&head->lock);
}
@@ -825,7 +822,7 @@
head = &sctp_assoc_hashtable[epb->hashent];
sctp_write_lock(&head->lock);
- __hlist_del(&epb->node);
+ hlist_del_init(&epb->node);
sctp_write_unlock(&head->lock);
}
diff --git a/net/sctp/output.c b/net/sctp/output.c
index f1b7d4b..6ae47ac 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -248,6 +248,11 @@
/* If the SACK timer is running, we have a pending SACK */
if (timer_pending(timer)) {
struct sctp_chunk *sack;
+
+ if (pkt->transport->sack_generation !=
+ pkt->transport->asoc->peer.sack_generation)
+ return retval;
+
asoc->a_rwnd = asoc->rwnd;
sack = sctp_make_sack(asoc);
if (sack) {
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 5942d27..9c90811 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -673,7 +673,9 @@
SCTP_DEBUG_PRINTK("sctp_addrwq_timo_handler: sctp_asconf_mgmt failed\n");
sctp_bh_unlock_sock(sk);
}
+#if IS_ENABLED(CONFIG_IPV6)
free_next:
+#endif
list_del(&addrw->list);
kfree(addrw);
}
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index a85eeeb..b6de71e 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -734,8 +734,10 @@
int len;
__u32 ctsn;
__u16 num_gabs, num_dup_tsns;
+ struct sctp_association *aptr = (struct sctp_association *)asoc;
struct sctp_tsnmap *map = (struct sctp_tsnmap *)&asoc->peer.tsn_map;
struct sctp_gap_ack_block gabs[SCTP_MAX_GABS];
+ struct sctp_transport *trans;
memset(gabs, 0, sizeof(gabs));
ctsn = sctp_tsnmap_get_ctsn(map);
@@ -805,6 +807,20 @@
sctp_addto_chunk(retval, sizeof(__u32) * num_dup_tsns,
sctp_tsnmap_get_dups(map));
+ /* Once we have a sack generated, check to see what our sack
+ * generation is, if its 0, reset the transports to 0, and reset
+ * the association generation to 1
+ *
+ * The idea is that zero is never used as a valid generation for the
+ * association so no transport will match after a wrap event like this,
+ * Until the next sack
+ */
+ if (++aptr->peer.sack_generation == 0) {
+ list_for_each_entry(trans, &asoc->peer.transport_addr_list,
+ transports)
+ trans->sack_generation = 0;
+ aptr->peer.sack_generation = 1;
+ }
nodata:
return retval;
}
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index c96d1a8..8716da1 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -1268,7 +1268,7 @@
case SCTP_CMD_REPORT_TSN:
/* Record the arrival of a TSN. */
error = sctp_tsnmap_mark(&asoc->peer.tsn_map,
- cmd->obj.u32);
+ cmd->obj.u32, NULL);
break;
case SCTP_CMD_REPORT_FWDTSN:
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index b3b8a8d..31c7bfc 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1231,8 +1231,14 @@
SCTP_DEBUG_PRINTK("About to exit __sctp_connect() free asoc: %p"
" kaddrs: %p err: %d\n",
asoc, kaddrs, err);
- if (asoc)
+ if (asoc) {
+ /* sctp_primitive_ASSOCIATE may have added this association
+ * To the hash table, try to unhash it, just in case, its a noop
+ * if it wasn't hashed so we're safe
+ */
+ sctp_unhash_established(asoc);
sctp_association_free(asoc);
+ }
return err;
}
@@ -1942,8 +1948,10 @@
goto out_unlock;
out_free:
- if (new_asoc)
+ if (new_asoc) {
+ sctp_unhash_established(asoc);
sctp_association_free(asoc);
+ }
out_unlock:
sctp_release_sock(sk);
diff --git a/net/sctp/transport.c b/net/sctp/transport.c
index b026ba0..1dcceb6 100644
--- a/net/sctp/transport.c
+++ b/net/sctp/transport.c
@@ -68,6 +68,8 @@
peer->af_specific = sctp_get_af_specific(addr->sa.sa_family);
memset(&peer->saddr, 0, sizeof(union sctp_addr));
+ peer->sack_generation = 0;
+
/* From 6.3.1 RTO Calculation:
*
* C1) Until an RTT measurement has been made for a packet sent to the
diff --git a/net/sctp/tsnmap.c b/net/sctp/tsnmap.c
index f1e40ceb..b5fb7c40 100644
--- a/net/sctp/tsnmap.c
+++ b/net/sctp/tsnmap.c
@@ -114,7 +114,8 @@
/* Mark this TSN as seen. */
-int sctp_tsnmap_mark(struct sctp_tsnmap *map, __u32 tsn)
+int sctp_tsnmap_mark(struct sctp_tsnmap *map, __u32 tsn,
+ struct sctp_transport *trans)
{
u16 gap;
@@ -133,6 +134,9 @@
*/
map->max_tsn_seen++;
map->cumulative_tsn_ack_point++;
+ if (trans)
+ trans->sack_generation =
+ trans->asoc->peer.sack_generation;
map->base_tsn++;
} else {
/* Either we already have a gap, or about to record a gap, so
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index 8a84017..33d8947 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -715,7 +715,8 @@
* can mark it as received so the tsn_map is updated correctly.
*/
if (sctp_tsnmap_mark(&asoc->peer.tsn_map,
- ntohl(chunk->subh.data_hdr->tsn)))
+ ntohl(chunk->subh.data_hdr->tsn),
+ chunk->transport))
goto fail_mark;
/* First calculate the padding, so we don't inadvertently
diff --git a/net/sctp/ulpqueue.c b/net/sctp/ulpqueue.c
index f2d1de7..f5a6a4f 100644
--- a/net/sctp/ulpqueue.c
+++ b/net/sctp/ulpqueue.c
@@ -1051,7 +1051,7 @@
if (chunk && (freed >= needed)) {
__u32 tsn;
tsn = ntohl(chunk->subh.data_hdr->tsn);
- sctp_tsnmap_mark(&asoc->peer.tsn_map, tsn);
+ sctp_tsnmap_mark(&asoc->peer.tsn_map, tsn, chunk->transport);
sctp_ulpq_tail_data(ulpq, chunk, gfp);
sctp_ulpq_partial_delivery(ulpq, chunk, gfp);
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index 0404047..21fde99 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -71,7 +71,9 @@
msg->errno = err;
destroy_msg(msg);
} while (!list_empty(head));
- wake_up(waitq);
+
+ if (waitq)
+ wake_up(waitq);
}
static void
@@ -91,11 +93,9 @@
}
dentry = dget(pipe->dentry);
spin_unlock(&pipe->lock);
- if (dentry) {
- rpc_purge_list(&RPC_I(dentry->d_inode)->waitq,
- &free_list, destroy_msg, -ETIMEDOUT);
- dput(dentry);
- }
+ rpc_purge_list(dentry ? &RPC_I(dentry->d_inode)->waitq : NULL,
+ &free_list, destroy_msg, -ETIMEDOUT);
+ dput(dentry);
}
ssize_t rpc_pipe_generic_upcall(struct file *filp, struct rpc_pipe_msg *msg,
diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index 7e9baaa..3ee7461 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -1374,7 +1374,8 @@
sizeof(req->rq_snd_buf));
return bc_send(req);
} else {
- /* Nothing to do to drop request */
+ /* drop request */
+ xprt_free_bc_request(req);
return 0;
}
}
diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c
index d2a19b0..89baa33 100644
--- a/net/wireless/ibss.c
+++ b/net/wireless/ibss.c
@@ -42,6 +42,7 @@
cfg80211_hold_bss(bss_from_pub(bss));
wdev->current_bss = bss_from_pub(bss);
+ wdev->sme_state = CFG80211_SME_CONNECTED;
cfg80211_upload_connect_keys(wdev);
nl80211_send_ibss_bssid(wiphy_to_dev(wdev->wiphy), dev, bssid,
@@ -60,7 +61,7 @@
struct cfg80211_event *ev;
unsigned long flags;
- CFG80211_DEV_WARN_ON(!wdev->ssid_len);
+ CFG80211_DEV_WARN_ON(wdev->sme_state != CFG80211_SME_CONNECTING);
ev = kzalloc(sizeof(*ev), gfp);
if (!ev)
@@ -115,9 +116,11 @@
#ifdef CONFIG_CFG80211_WEXT
wdev->wext.ibss.channel = params->channel;
#endif
+ wdev->sme_state = CFG80211_SME_CONNECTING;
err = rdev->ops->join_ibss(&rdev->wiphy, dev, params);
if (err) {
wdev->connect_keys = NULL;
+ wdev->sme_state = CFG80211_SME_IDLE;
return err;
}
@@ -169,6 +172,7 @@
}
wdev->current_bss = NULL;
+ wdev->sme_state = CFG80211_SME_IDLE;
wdev->ssid_len = 0;
#ifdef CONFIG_CFG80211_WEXT
if (!nowext)
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 15f3474..baf5704 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1389,7 +1389,7 @@
spin_unlock(®_requests_lock);
if (last_request->initiator == NL80211_REGDOM_SET_BY_USER)
- cancel_delayed_work_sync(®_timeout);
+ cancel_delayed_work(®_timeout);
if (need_more_processing)
schedule_work(®_work);
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 55d9946..316cfd0 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -804,7 +804,7 @@
ntype == NL80211_IFTYPE_P2P_CLIENT))
return -EBUSY;
- if (ntype != otype) {
+ if (ntype != otype && netif_running(dev)) {
err = cfg80211_can_change_interface(rdev, dev->ieee80211_ptr,
ntype);
if (err)
@@ -935,6 +935,7 @@
enum nl80211_iftype iftype)
{
struct wireless_dev *wdev_iter;
+ u32 used_iftypes = BIT(iftype);
int num[NUM_NL80211_IFTYPES];
int total = 1;
int i, j;
@@ -961,6 +962,7 @@
num[wdev_iter->iftype]++;
total++;
+ used_iftypes |= BIT(wdev_iter->iftype);
}
mutex_unlock(&rdev->devlist_mtx);
@@ -970,6 +972,7 @@
for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) {
const struct ieee80211_iface_combination *c;
struct ieee80211_iface_limit *limits;
+ u32 all_iftypes = 0;
c = &rdev->wiphy.iface_combinations[i];
@@ -984,6 +987,7 @@
if (rdev->wiphy.software_iftypes & BIT(iftype))
continue;
for (j = 0; j < c->n_limits; j++) {
+ all_iftypes |= limits[j].types;
if (!(limits[j].types & BIT(iftype)))
continue;
if (limits[j].max < num[iftype])
@@ -991,7 +995,20 @@
limits[j].max -= num[iftype];
}
}
- /* yay, it fits */
+
+ /*
+ * Finally check that all iftypes that we're currently
+ * using are actually part of this combination. If they
+ * aren't then we can't use this combination and have
+ * to continue to the next.
+ */
+ if ((all_iftypes & used_iftypes) != used_iftypes)
+ goto cont;
+
+ /*
+ * This combination covered all interface types and
+ * supported the requested numbers, so we're good.
+ */
kfree(limits);
return 0;
cont:
diff --git a/samples/seccomp/.gitignore b/samples/seccomp/.gitignore
new file mode 100644
index 0000000..78fb781
--- /dev/null
+++ b/samples/seccomp/.gitignore
@@ -0,0 +1,3 @@
+bpf-direct
+bpf-fancy
+dropper
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index 0948c6b..8b673dd 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -83,6 +83,8 @@
push(@signature_tags, "Reviewed-by:");
push(@signature_tags, "Acked-by:");
+my $signature_pattern = "\(" . join("|", @signature_tags) . "\)";
+
# rfc822 email address - preloaded methods go here.
my $rfc822_lwsp = "(?:(?:\\r\\n)?[ \\t])";
my $rfc822_char = '[\\000-\\377]';
@@ -473,7 +475,6 @@
my @status = ();
my %deduplicate_name_hash = ();
my %deduplicate_address_hash = ();
-my $signature_pattern;
my @maintainers = get_maintainers();
diff --git a/scripts/gfp-translate b/scripts/gfp-translate
old mode 100644
new mode 100755
diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig
index 35664fe..b9c1219 100644
--- a/security/integrity/ima/Kconfig
+++ b/security/integrity/ima/Kconfig
@@ -38,8 +38,9 @@
measurement list. If unsure, use the default 10.
config IMA_AUDIT
- bool
+ bool "Enables auditing support"
depends on IMA
+ depends on AUDIT
default y
help
This option adds a kernel parameter 'ima_audit', which
diff --git a/security/integrity/ima/Makefile b/security/integrity/ima/Makefile
index 5690c02..5f740f6 100644
--- a/security/integrity/ima/Makefile
+++ b/security/integrity/ima/Makefile
@@ -6,4 +6,5 @@
obj-$(CONFIG_IMA) += ima.o
ima-y := ima_fs.o ima_queue.o ima_init.o ima_main.o ima_crypto.o ima_api.o \
- ima_policy.o ima_audit.o
+ ima_policy.o
+ima-$(CONFIG_IMA_AUDIT) += ima_audit.o
diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h
index 3ccf7ac..e7c99fd 100644
--- a/security/integrity/ima/ima.h
+++ b/security/integrity/ima/ima.h
@@ -61,10 +61,19 @@
};
extern struct list_head ima_measurements; /* list of all measurements */
+#ifdef CONFIG_IMA_AUDIT
/* declarations */
void integrity_audit_msg(int audit_msgno, struct inode *inode,
const unsigned char *fname, const char *op,
const char *cause, int result, int info);
+#else
+static inline void integrity_audit_msg(int audit_msgno, struct inode *inode,
+ const unsigned char *fname,
+ const char *op, const char *cause,
+ int result, int info)
+{
+}
+#endif
/* Internal IMA function definitions */
int ima_init(void);
diff --git a/security/integrity/ima/ima_api.c b/security/integrity/ima/ima_api.c
index 88a2788..032ff03 100644
--- a/security/integrity/ima/ima_api.c
+++ b/security/integrity/ima/ima_api.c
@@ -175,7 +175,9 @@
}
memset(&entry->template, 0, sizeof(entry->template));
memcpy(entry->template.digest, iint->digest, IMA_DIGEST_SIZE);
- strncpy(entry->template.file_name, filename, IMA_EVENT_NAME_LEN_MAX);
+ strcpy(entry->template.file_name,
+ (strlen(filename) > IMA_EVENT_NAME_LEN_MAX) ?
+ file->f_dentry->d_name.name : filename);
result = ima_store_template(entry, violation, inode);
if (!result || result == -EEXIST)
diff --git a/security/integrity/ima/ima_audit.c b/security/integrity/ima/ima_audit.c
index 21e96bf..7a57f67 100644
--- a/security/integrity/ima/ima_audit.c
+++ b/security/integrity/ima/ima_audit.c
@@ -17,8 +17,6 @@
static int ima_audit;
-#ifdef CONFIG_IMA_AUDIT
-
/* ima_audit_setup - enable informational auditing messages */
static int __init ima_audit_setup(char *str)
{
@@ -29,7 +27,6 @@
return 1;
}
__setup("ima_audit=", ima_audit_setup);
-#endif
void integrity_audit_msg(int audit_msgno, struct inode *inode,
const unsigned char *fname, const char *op,
diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c
index e1aa2b4..38477c9 100644
--- a/security/integrity/ima/ima_fs.c
+++ b/security/integrity/ima/ima_fs.c
@@ -367,20 +367,11 @@
return 0;
out:
- securityfs_remove(runtime_measurements_count);
- securityfs_remove(ascii_runtime_measurements);
- securityfs_remove(binary_runtime_measurements);
- securityfs_remove(ima_dir);
- securityfs_remove(ima_policy);
- return -1;
-}
-
-void __exit ima_fs_cleanup(void)
-{
securityfs_remove(violations);
securityfs_remove(runtime_measurements_count);
securityfs_remove(ascii_runtime_measurements);
securityfs_remove(binary_runtime_measurements);
securityfs_remove(ima_dir);
securityfs_remove(ima_policy);
+ return -1;
}
diff --git a/security/integrity/ima/ima_init.c b/security/integrity/ima/ima_init.c
index 17f1f06..b5dfd53 100644
--- a/security/integrity/ima/ima_init.c
+++ b/security/integrity/ima/ima_init.c
@@ -90,8 +90,3 @@
return ima_fs_init();
}
-
-void __exit ima_cleanup(void)
-{
- ima_fs_cleanup();
-}
diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c
index b17be79..be82949 100644
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -54,6 +54,7 @@
fmode_t mode = file->f_mode;
int rc;
bool send_tomtou = false, send_writers = false;
+ unsigned char *pathname = NULL, *pathbuf = NULL;
if (!S_ISREG(inode->i_mode) || !ima_initialized)
return;
@@ -75,12 +76,27 @@
out:
mutex_unlock(&inode->i_mutex);
+ if (!send_tomtou && !send_writers)
+ return;
+
+ /* We will allow 11 spaces for ' (deleted)' to be appended */
+ pathbuf = kmalloc(PATH_MAX + 11, GFP_KERNEL);
+ if (pathbuf) {
+ pathname = d_path(&file->f_path, pathbuf, PATH_MAX + 11);
+ if (IS_ERR(pathname))
+ pathname = NULL;
+ else if (strlen(pathname) > IMA_EVENT_NAME_LEN_MAX)
+ pathname = NULL;
+ }
if (send_tomtou)
- ima_add_violation(inode, dentry->d_name.name, "invalid_pcr",
- "ToMToU");
+ ima_add_violation(inode,
+ !pathname ? dentry->d_name.name : pathname,
+ "invalid_pcr", "ToMToU");
if (send_writers)
- ima_add_violation(inode, dentry->d_name.name, "invalid_pcr",
- "open_writers");
+ ima_add_violation(inode,
+ !pathname ? dentry->d_name.name : pathname,
+ "invalid_pcr", "open_writers");
+ kfree(pathbuf);
}
static void ima_check_last_writer(struct integrity_iint_cache *iint,
@@ -123,6 +139,7 @@
{
struct inode *inode = file->f_dentry->d_inode;
struct integrity_iint_cache *iint;
+ unsigned char *pathname = NULL, *pathbuf = NULL;
int rc = 0;
if (!ima_initialized || !S_ISREG(inode->i_mode))
@@ -147,8 +164,21 @@
goto out;
rc = ima_collect_measurement(iint, file);
- if (!rc)
- ima_store_measurement(iint, file, filename);
+ if (rc != 0)
+ goto out;
+
+ if (function != BPRM_CHECK) {
+ /* We will allow 11 spaces for ' (deleted)' to be appended */
+ pathbuf = kmalloc(PATH_MAX + 11, GFP_KERNEL);
+ if (pathbuf) {
+ pathname =
+ d_path(&file->f_path, pathbuf, PATH_MAX + 11);
+ if (IS_ERR(pathname))
+ pathname = NULL;
+ }
+ }
+ ima_store_measurement(iint, file, !pathname ? filename : pathname);
+ kfree(pathbuf);
out:
mutex_unlock(&iint->mutex);
return rc;
@@ -228,15 +258,11 @@
int error;
error = ima_init();
- ima_initialized = 1;
+ if (!error)
+ ima_initialized = 1;
return error;
}
-static void __exit cleanup_ima(void)
-{
- ima_cleanup();
-}
-
late_initcall(init_ima); /* Start IMA after the TPM is available */
MODULE_DESCRIPTION("Integrity Measurement Architecture");
diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c
index d8edff2..1a95830 100644
--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -63,6 +63,8 @@
{.action = DONT_MEASURE,.fsmagic = DEBUGFS_MAGIC,.flags = IMA_FSMAGIC},
{.action = DONT_MEASURE,.fsmagic = TMPFS_MAGIC,.flags = IMA_FSMAGIC},
{.action = DONT_MEASURE,.fsmagic = RAMFS_MAGIC,.flags = IMA_FSMAGIC},
+ {.action = DONT_MEASURE,.fsmagic = DEVPTS_SUPER_MAGIC,.flags = IMA_FSMAGIC},
+ {.action = DONT_MEASURE,.fsmagic = BINFMTFS_MAGIC,.flags = IMA_FSMAGIC},
{.action = DONT_MEASURE,.fsmagic = SECURITYFS_MAGIC,.flags = IMA_FSMAGIC},
{.action = DONT_MEASURE,.fsmagic = SELINUX_MAGIC,.flags = IMA_FSMAGIC},
{.action = MEASURE,.func = FILE_MMAP,.mask = MAY_EXEC,
diff --git a/security/keys/compat.c b/security/keys/compat.c
index c92d42b..1c26176 100644
--- a/security/keys/compat.c
+++ b/security/keys/compat.c
@@ -24,7 +24,7 @@
*
* If successful, 0 will be returned.
*/
-long compat_keyctl_instantiate_key_iov(
+static long compat_keyctl_instantiate_key_iov(
key_serial_t id,
const struct compat_iovec __user *_payload_iov,
unsigned ioc,
@@ -33,7 +33,7 @@
struct iovec iovstack[UIO_FASTIOV], *iov = iovstack;
long ret;
- if (_payload_iov == 0 || ioc == 0)
+ if (!_payload_iov || !ioc)
goto no_payload;
ret = compat_rw_copy_check_uvector(WRITE, _payload_iov, ioc,
diff --git a/security/keys/internal.h b/security/keys/internal.h
index 3dcbf86..22ff052 100644
--- a/security/keys/internal.h
+++ b/security/keys/internal.h
@@ -149,7 +149,7 @@
#define KEY_LOOKUP_FOR_UNLINK 0x04
extern long join_session_keyring(const char *name);
-extern void key_change_session_keyring(struct task_work *twork);
+extern void key_change_session_keyring(struct callback_head *twork);
extern struct work_struct key_gc_work;
extern unsigned key_gc_delay;
@@ -242,7 +242,7 @@
extern long keyctl_invalidate_key(key_serial_t);
extern long keyctl_instantiate_key_common(key_serial_t,
- const struct iovec __user *,
+ const struct iovec *,
unsigned, size_t, key_serial_t);
/*
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 0f5b3f0..3364fbf 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -1106,7 +1106,7 @@
struct iovec iovstack[UIO_FASTIOV], *iov = iovstack;
long ret;
- if (_payload_iov == 0 || ioc == 0)
+ if (!_payload_iov || !ioc)
goto no_payload;
ret = rw_copy_check_uvector(WRITE, _payload_iov, ioc,
@@ -1456,7 +1456,7 @@
{
struct task_struct *me, *parent;
const struct cred *mycred, *pcred;
- struct task_work *newwork, *oldwork;
+ struct callback_head *newwork, *oldwork;
key_ref_t keyring_r;
struct cred *cred;
int ret;
@@ -1466,19 +1466,17 @@
return PTR_ERR(keyring_r);
ret = -ENOMEM;
- newwork = kmalloc(sizeof(struct task_work), GFP_KERNEL);
- if (!newwork)
- goto error_keyring;
/* our parent is going to need a new cred struct, a new tgcred struct
* and new security data, so we allocate them here to prevent ENOMEM in
* our parent */
cred = cred_alloc_blank();
if (!cred)
- goto error_newwork;
+ goto error_keyring;
+ newwork = &cred->rcu;
cred->tgcred->session_keyring = key_ref_to_ptr(keyring_r);
- init_task_work(newwork, key_change_session_keyring, cred);
+ init_task_work(newwork, key_change_session_keyring);
me = current;
rcu_read_lock();
@@ -1488,6 +1486,7 @@
oldwork = NULL;
parent = me->real_parent;
+ task_lock(parent);
/* the parent mustn't be init and mustn't be a kernel thread */
if (parent->pid <= 1 || !parent->mm)
goto unlock;
@@ -1531,20 +1530,15 @@
if (!ret)
newwork = NULL;
unlock:
+ task_unlock(parent);
write_unlock_irq(&tasklist_lock);
rcu_read_unlock();
- if (oldwork) {
- put_cred(oldwork->data);
- kfree(oldwork);
- }
- if (newwork) {
- put_cred(newwork->data);
- kfree(newwork);
- }
+ if (oldwork)
+ put_cred(container_of(oldwork, struct cred, rcu));
+ if (newwork)
+ put_cred(cred);
return ret;
-error_newwork:
- kfree(newwork);
error_keyring:
key_ref_put(keyring_r);
return ret;
diff --git a/security/keys/keyring.c b/security/keys/keyring.c
index 7445875..81e7852 100644
--- a/security/keys/keyring.c
+++ b/security/keys/keyring.c
@@ -751,6 +751,7 @@
int __key_link_begin(struct key *keyring, const struct key_type *type,
const char *description, unsigned long *_prealloc)
__acquires(&keyring->sem)
+ __acquires(&keyring_serialise_link_sem)
{
struct keyring_list *klist, *nklist;
unsigned long prealloc;
@@ -960,6 +961,7 @@
void __key_link_end(struct key *keyring, struct key_type *type,
unsigned long prealloc)
__releases(&keyring->sem)
+ __releases(&keyring_serialise_link_sem)
{
BUG_ON(type == NULL);
BUG_ON(type->name == NULL);
diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c
index 4ad54ee..54339cf 100644
--- a/security/keys/process_keys.c
+++ b/security/keys/process_keys.c
@@ -834,12 +834,11 @@
* Replace a process's session keyring on behalf of one of its children when
* the target process is about to resume userspace execution.
*/
-void key_change_session_keyring(struct task_work *twork)
+void key_change_session_keyring(struct callback_head *twork)
{
const struct cred *old = current_cred();
- struct cred *new = twork->data;
+ struct cred *new = container_of(twork, struct cred, rcu);
- kfree(twork);
if (unlikely(current->flags & PF_EXITING)) {
put_cred(new);
return;
diff --git a/security/security.c b/security/security.c
index 3efc9b1..860aeb3 100644
--- a/security/security.c
+++ b/security/security.c
@@ -23,6 +23,7 @@
#include <linux/mman.h>
#include <linux/mount.h>
#include <linux/personality.h>
+#include <linux/backing-dev.h>
#include <net/flow.h>
#define MAX_LSM_EVM_XATTR 2
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 372ec65..9292a89 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -2157,8 +2157,7 @@
get_file(devnull);
} else {
devnull = dentry_open(
- dget(selinux_null),
- mntget(selinuxfs_mount),
+ &selinux_null,
O_RDWR, cred);
if (IS_ERR(devnull)) {
devnull = NULL;
@@ -2717,7 +2716,7 @@
ATTR_ATIME_SET | ATTR_MTIME_SET | ATTR_TIMES_SET))
return dentry_has_perm(cred, dentry, FILE__SETATTR);
- if (ia_valid & ATTR_SIZE)
+ if (selinux_policycap_openperm && (ia_valid & ATTR_SIZE))
av |= FILE__OPEN;
return dentry_has_perm(cred, dentry, av);
diff --git a/security/selinux/include/classmap.h b/security/selinux/include/classmap.h
index b8c5372..df2de54 100644
--- a/security/selinux/include/classmap.h
+++ b/security/selinux/include/classmap.h
@@ -145,7 +145,9 @@
"node_bind", "name_connect", NULL } },
{ "memprotect", { "mmap_zero", NULL } },
{ "peer", { "recv", NULL } },
- { "capability2", { "mac_override", "mac_admin", "syslog", NULL } },
+ { "capability2",
+ { "mac_override", "mac_admin", "syslog", "wake_alarm", "block_suspend",
+ NULL } },
{ "kernel_service", { "use_as_override", "create_files_as", NULL } },
{ "tun_socket",
{ COMMON_SOCK_PERMS, NULL } },
diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h
index dde2005..6d38851 100644
--- a/security/selinux/include/security.h
+++ b/security/selinux/include/security.h
@@ -221,7 +221,7 @@
extern void selinux_complete_init(void);
extern int selinux_disable(void);
extern void exit_sel_fs(void);
-extern struct dentry *selinux_null;
+extern struct path selinux_null;
extern struct vfsmount *selinuxfs_mount;
extern void selnl_notify_setenforce(int val);
extern void selnl_notify_policyload(u32 seqno);
diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index 3ad2902..298e695 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -1297,7 +1297,7 @@
#define NULL_FILE_NAME "null"
-struct dentry *selinux_null;
+struct path selinux_null;
static ssize_t sel_read_avc_cache_threshold(struct file *filp, char __user *buf,
size_t count, loff_t *ppos)
@@ -1838,7 +1838,7 @@
init_special_inode(inode, S_IFCHR | S_IRUGO | S_IWUGO, MKDEV(MEM_MAJOR, 3));
d_add(dentry, inode);
- selinux_null = dentry;
+ selinux_null.dentry = dentry;
dentry = sel_make_dir(sb->s_root, "avc", &sel_last_ino);
if (IS_ERR(dentry)) {
@@ -1912,7 +1912,7 @@
return err;
}
- selinuxfs_mount = kern_mount(&sel_fs_type);
+ selinux_null.mnt = selinuxfs_mount = kern_mount(&sel_fs_type);
if (IS_ERR(selinuxfs_mount)) {
printk(KERN_ERR "selinuxfs: could not mount!\n");
err = PTR_ERR(selinuxfs_mount);
diff --git a/security/smack/smack.h b/security/smack/smack.h
index cc361b8..99b3612 100644
--- a/security/smack/smack.h
+++ b/security/smack/smack.h
@@ -43,7 +43,6 @@
char *smk_hat;
char *smk_default;
int smk_initialized;
- spinlock_t smk_sblock; /* for initialization */
};
struct socket_smack {
@@ -284,6 +283,19 @@
}
/*
+ * Is the task privileged and allowed to be privileged
+ * by the onlycap rule.
+ */
+static inline int smack_privileged(int cap)
+{
+ if (!capable(cap))
+ return 0;
+ if (smack_onlycap == NULL || smack_onlycap == smk_of_current())
+ return 1;
+ return 0;
+}
+
+/*
* logging functions
*/
#define SMACK_AUDIT_DENIED 0x1
diff --git a/security/smack/smack_access.c b/security/smack/smack_access.c
index 9f3705e..db14689 100644
--- a/security/smack/smack_access.c
+++ b/security/smack/smack_access.c
@@ -220,14 +220,9 @@
}
/*
- * Return if a specific label has been designated as the
- * only one that gets privilege and current does not
- * have that label.
+ * Allow for priviliged to override policy.
*/
- if (smack_onlycap != NULL && smack_onlycap != sp)
- goto out_audit;
-
- if (capable(CAP_MAC_OVERRIDE))
+ if (rc != 0 && smack_privileged(CAP_MAC_OVERRIDE))
rc = 0;
out_audit:
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index ee0bb57..8221514 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -217,7 +217,7 @@
int rc = 0;
char *sp = smk_of_current();
- if (capable(CAP_MAC_OVERRIDE))
+ if (smack_privileged(CAP_MAC_OVERRIDE))
return 0;
if (sp != smack_known_floor.smk_known)
@@ -251,7 +251,6 @@
sbsp->smk_floor = smack_known_floor.smk_known;
sbsp->smk_hat = smack_known_hat.smk_known;
sbsp->smk_initialized = 0;
- spin_lock_init(&sbsp->smk_sblock);
sb->s_security = sbsp;
@@ -332,13 +331,10 @@
char *commap;
char *nsp;
- spin_lock(&sp->smk_sblock);
- if (sp->smk_initialized != 0) {
- spin_unlock(&sp->smk_sblock);
+ if (sp->smk_initialized != 0)
return 0;
- }
+
sp->smk_initialized = 1;
- spin_unlock(&sp->smk_sblock);
for (op = data; op != NULL; op = commap) {
commap = strchr(op, ',');
@@ -825,7 +821,7 @@
strcmp(name, XATTR_NAME_SMACKIPOUT) == 0 ||
strcmp(name, XATTR_NAME_SMACKEXEC) == 0 ||
strcmp(name, XATTR_NAME_SMACKMMAP) == 0) {
- if (!capable(CAP_MAC_ADMIN))
+ if (!smack_privileged(CAP_MAC_ADMIN))
rc = -EPERM;
/*
* check label validity here so import wont fail on
@@ -835,7 +831,7 @@
smk_import(value, size) == NULL)
rc = -EINVAL;
} else if (strcmp(name, XATTR_NAME_SMACKTRANSMUTE) == 0) {
- if (!capable(CAP_MAC_ADMIN))
+ if (!smack_privileged(CAP_MAC_ADMIN))
rc = -EPERM;
if (size != TRANS_TRUE_SIZE ||
strncmp(value, TRANS_TRUE, TRANS_TRUE_SIZE) != 0)
@@ -931,7 +927,7 @@
strcmp(name, XATTR_NAME_SMACKEXEC) == 0 ||
strcmp(name, XATTR_NAME_SMACKTRANSMUTE) == 0 ||
strcmp(name, XATTR_NAME_SMACKMMAP)) {
- if (!capable(CAP_MAC_ADMIN))
+ if (!smack_privileged(CAP_MAC_ADMIN))
rc = -EPERM;
} else
rc = cap_inode_removexattr(dentry, name);
@@ -1720,7 +1716,8 @@
* state into account in the decision as well as
* the smack value.
*/
- if (capable(CAP_MAC_OVERRIDE) || has_capability(p, CAP_MAC_OVERRIDE))
+ if (smack_privileged(CAP_MAC_OVERRIDE) ||
+ has_capability(p, CAP_MAC_OVERRIDE))
rc = 0;
/* we log only if we didn't get overriden */
out_log:
@@ -2721,7 +2718,7 @@
if (p != current)
return -EPERM;
- if (!capable(CAP_MAC_ADMIN))
+ if (!smack_privileged(CAP_MAC_ADMIN))
return -EPERM;
if (value == NULL || size == 0 || size >= SMK_LONGLABEL)
@@ -2784,7 +2781,7 @@
smk_ad_setfield_u_net_sk(&ad, other);
#endif
- if (!capable(CAP_MAC_OVERRIDE))
+ if (!smack_privileged(CAP_MAC_OVERRIDE))
rc = smk_access(ssp->smk_out, osp->smk_in, MAY_WRITE, &ad);
/*
@@ -2820,7 +2817,7 @@
smk_ad_setfield_u_net_sk(&ad, other->sk);
#endif
- if (!capable(CAP_MAC_OVERRIDE))
+ if (!smack_privileged(CAP_MAC_OVERRIDE))
rc = smk_access(ssp->smk_out, osp->smk_in, MAY_WRITE, &ad);
return rc;
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index 1810c9a..d31e6d9 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -215,28 +215,27 @@
* @access: access string
* @rule: Smack rule
* @import: if non-zero, import labels
+ * @len: label length limit
*
* Returns 0 on success, -1 on failure
*/
static int smk_fill_rule(const char *subject, const char *object,
const char *access, struct smack_rule *rule,
- int import)
+ int import, int len)
{
- int rc = -1;
- int done;
const char *cp;
struct smack_known *skp;
if (import) {
- rule->smk_subject = smk_import(subject, 0);
+ rule->smk_subject = smk_import(subject, len);
if (rule->smk_subject == NULL)
return -1;
- rule->smk_object = smk_import(object, 0);
+ rule->smk_object = smk_import(object, len);
if (rule->smk_object == NULL)
return -1;
} else {
- cp = smk_parse_smack(subject, 0);
+ cp = smk_parse_smack(subject, len);
if (cp == NULL)
return -1;
skp = smk_find_entry(cp);
@@ -245,7 +244,7 @@
return -1;
rule->smk_subject = skp->smk_known;
- cp = smk_parse_smack(object, 0);
+ cp = smk_parse_smack(object, len);
if (cp == NULL)
return -1;
skp = smk_find_entry(cp);
@@ -257,7 +256,7 @@
rule->smk_access = 0;
- for (cp = access, done = 0; *cp && !done; cp++) {
+ for (cp = access; *cp != '\0'; cp++) {
switch (*cp) {
case '-':
break;
@@ -282,13 +281,11 @@
rule->smk_access |= MAY_TRANSMUTE;
break;
default:
- done = 1;
- break;
+ return 0;
}
}
- rc = 0;
- return rc;
+ return 0;
}
/**
@@ -304,7 +301,8 @@
int rc;
rc = smk_fill_rule(data, data + SMK_LABELLEN,
- data + SMK_LABELLEN + SMK_LABELLEN, rule, import);
+ data + SMK_LABELLEN + SMK_LABELLEN, rule, import,
+ SMK_LABELLEN);
return rc;
}
@@ -340,7 +338,7 @@
goto free_out_o;
if (sscanf(data, "%s %s %s", subject, object, access) == 3)
- rc = smk_fill_rule(subject, object, access, rule, import);
+ rc = smk_fill_rule(subject, object, access, rule, import, 0);
kfree(access);
free_out_o:
@@ -520,6 +518,9 @@
if (strlen(srp->smk_subject) >= max || strlen(srp->smk_object) >= max)
return;
+ if (srp->smk_access == 0)
+ return;
+
seq_printf(s, "%s %s", srp->smk_subject, srp->smk_object);
seq_putc(s, ' ');
@@ -534,8 +535,6 @@
seq_putc(s, 'a');
if (srp->smk_access & MAY_TRANSMUTE)
seq_putc(s, 't');
- if (srp->smk_access == 0)
- seq_putc(s, '-');
seq_putc(s, '\n');
}
@@ -595,13 +594,12 @@
static ssize_t smk_write_load(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
-
/*
* Must have privilege.
* No partial writes.
* Enough data must be present.
*/
- if (!capable(CAP_MAC_ADMIN))
+ if (!smack_privileged(CAP_MAC_ADMIN))
return -EPERM;
return smk_write_rules_list(file, buf, count, ppos, NULL, NULL,
@@ -787,7 +785,7 @@
* No partial writes.
* Enough data must be present.
*/
- if (!capable(CAP_MAC_ADMIN))
+ if (!smack_privileged(CAP_MAC_ADMIN))
return -EPERM;
if (*ppos != 0)
return -EINVAL;
@@ -1090,7 +1088,7 @@
* "<addr/mask, as a.b.c.d/e><space><label>"
* "<addr, as a.b.c.d><space><label>"
*/
- if (!capable(CAP_MAC_ADMIN))
+ if (!smack_privileged(CAP_MAC_ADMIN))
return -EPERM;
if (*ppos != 0)
return -EINVAL;
@@ -1267,7 +1265,7 @@
char temp[80];
int i;
- if (!capable(CAP_MAC_ADMIN))
+ if (!smack_privileged(CAP_MAC_ADMIN))
return -EPERM;
if (count >= sizeof(temp) || count == 0)
@@ -1334,7 +1332,7 @@
char temp[80];
int i;
- if (!capable(CAP_MAC_ADMIN))
+ if (!smack_privileged(CAP_MAC_ADMIN))
return -EPERM;
if (count >= sizeof(temp) || count == 0)
@@ -1412,7 +1410,7 @@
char temp[80];
int i;
- if (!capable(CAP_MAC_ADMIN))
+ if (!smack_privileged(CAP_MAC_ADMIN))
return -EPERM;
if (count >= sizeof(temp) || count == 0)
@@ -1503,7 +1501,7 @@
char *data;
int rc = count;
- if (!capable(CAP_MAC_ADMIN))
+ if (!smack_privileged(CAP_MAC_ADMIN))
return -EPERM;
data = kzalloc(count + 1, GFP_KERNEL);
@@ -1586,7 +1584,7 @@
char *sp = smk_of_task(current->cred->security);
int rc = count;
- if (!capable(CAP_MAC_ADMIN))
+ if (!smack_privileged(CAP_MAC_ADMIN))
return -EPERM;
/*
@@ -1664,7 +1662,7 @@
char temp[32];
int i;
- if (!capable(CAP_MAC_ADMIN))
+ if (!smack_privileged(CAP_MAC_ADMIN))
return -EPERM;
if (count >= sizeof(temp) || count == 0)
@@ -1885,7 +1883,7 @@
/*
* Must have privilege.
*/
- if (!capable(CAP_MAC_ADMIN))
+ if (!smack_privileged(CAP_MAC_ADMIN))
return -EPERM;
return smk_write_rules_list(file, buf, count, ppos, NULL, NULL,
@@ -2051,7 +2049,6 @@
}
root_inode = sb->s_root->d_inode;
- root_inode->i_security = new_inode_smack(smack_known_floor.smk_known);
return 0;
}
diff --git a/sound/aoa/codecs/onyx.c b/sound/aoa/codecs/onyx.c
index 270790d..4cedc69 100644
--- a/sound/aoa/codecs/onyx.c
+++ b/sound/aoa/codecs/onyx.c
@@ -997,45 +997,10 @@
onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx);
}
-static int onyx_create(struct i2c_adapter *adapter,
- struct device_node *node,
- int addr)
-{
- struct i2c_board_info info;
- struct i2c_client *client;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- strlcpy(info.type, "aoa_codec_onyx", I2C_NAME_SIZE);
- info.addr = addr;
- info.platform_data = node;
- client = i2c_new_device(adapter, &info);
- if (!client)
- return -ENODEV;
-
- /*
- * We know the driver is already loaded, so the device should be
- * already bound. If not it means binding failed, which suggests
- * the device doesn't really exist and should be deleted.
- * Ideally this would be replaced by better checks _before_
- * instantiating the device.
- */
- if (!client->driver) {
- i2c_unregister_device(client);
- return -ENODEV;
- }
-
- /*
- * Let i2c-core delete that device on driver removal.
- * This is safe because i2c-core holds the core_lock mutex for us.
- */
- list_add_tail(&client->detected, &client->driver->clients);
- return 0;
-}
-
static int onyx_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- struct device_node *node = client->dev.platform_data;
+ struct device_node *node = client->dev.of_node;
struct onyx *onyx;
u8 dummy;
@@ -1071,40 +1036,6 @@
return -ENODEV;
}
-static int onyx_i2c_attach(struct i2c_adapter *adapter)
-{
- struct device_node *busnode, *dev = NULL;
- struct pmac_i2c_bus *bus;
-
- bus = pmac_i2c_adapter_to_bus(adapter);
- if (bus == NULL)
- return -ENODEV;
- busnode = pmac_i2c_get_bus_node(bus);
-
- while ((dev = of_get_next_child(busnode, dev)) != NULL) {
- if (of_device_is_compatible(dev, "pcm3052")) {
- const u32 *addr;
- printk(KERN_DEBUG PFX "found pcm3052\n");
- addr = of_get_property(dev, "reg", NULL);
- if (!addr)
- return -ENODEV;
- return onyx_create(adapter, dev, (*addr)>>1);
- }
- }
-
- /* if that didn't work, try desperate mode for older
- * machines that have stuff missing from the device tree */
-
- if (!of_device_is_compatible(busnode, "k2-i2c"))
- return -ENODEV;
-
- printk(KERN_DEBUG PFX "found k2-i2c, checking if onyx chip is on it\n");
- /* probe both possible addresses for the onyx chip */
- if (onyx_create(adapter, NULL, 0x46) == 0)
- return 0;
- return onyx_create(adapter, NULL, 0x47);
-}
-
static int onyx_i2c_remove(struct i2c_client *client)
{
struct onyx *onyx = i2c_get_clientdata(client);
@@ -1117,16 +1048,16 @@
}
static const struct i2c_device_id onyx_i2c_id[] = {
- { "aoa_codec_onyx", 0 },
+ { "MAC,pcm3052", 0 },
{ }
};
+MODULE_DEVICE_TABLE(i2c,onyx_i2c_id);
static struct i2c_driver onyx_driver = {
.driver = {
.name = "aoa_codec_onyx",
.owner = THIS_MODULE,
},
- .attach_adapter = onyx_i2c_attach,
.probe = onyx_i2c_probe,
.remove = onyx_i2c_remove,
.id_table = onyx_i2c_id,
diff --git a/sound/aoa/codecs/tas.c b/sound/aoa/codecs/tas.c
index 8e63d1f..c491ae0 100644
--- a/sound/aoa/codecs/tas.c
+++ b/sound/aoa/codecs/tas.c
@@ -883,43 +883,10 @@
}
-static int tas_create(struct i2c_adapter *adapter,
- struct device_node *node,
- int addr)
-{
- struct i2c_board_info info;
- struct i2c_client *client;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- strlcpy(info.type, "aoa_codec_tas", I2C_NAME_SIZE);
- info.addr = addr;
- info.platform_data = node;
-
- client = i2c_new_device(adapter, &info);
- if (!client)
- return -ENODEV;
- /*
- * We know the driver is already loaded, so the device should be
- * already bound. If not it means binding failed, and then there
- * is no point in keeping the device instantiated.
- */
- if (!client->driver) {
- i2c_unregister_device(client);
- return -ENODEV;
- }
-
- /*
- * Let i2c-core delete that device on driver removal.
- * This is safe because i2c-core holds the core_lock mutex for us.
- */
- list_add_tail(&client->detected, &client->driver->clients);
- return 0;
-}
-
static int tas_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- struct device_node *node = client->dev.platform_data;
+ struct device_node *node = client->dev.of_node;
struct tas *tas;
tas = kzalloc(sizeof(struct tas), GFP_KERNEL);
@@ -953,47 +920,6 @@
return -EINVAL;
}
-static int tas_i2c_attach(struct i2c_adapter *adapter)
-{
- struct device_node *busnode, *dev = NULL;
- struct pmac_i2c_bus *bus;
-
- bus = pmac_i2c_adapter_to_bus(adapter);
- if (bus == NULL)
- return -ENODEV;
- busnode = pmac_i2c_get_bus_node(bus);
-
- while ((dev = of_get_next_child(busnode, dev)) != NULL) {
- if (of_device_is_compatible(dev, "tas3004")) {
- const u32 *addr;
- printk(KERN_DEBUG PFX "found tas3004\n");
- addr = of_get_property(dev, "reg", NULL);
- if (!addr)
- continue;
- return tas_create(adapter, dev, ((*addr) >> 1) & 0x7f);
- }
- /* older machines have no 'codec' node with a 'compatible'
- * property that says 'tas3004', they just have a 'deq'
- * node without any such property... */
- if (strcmp(dev->name, "deq") == 0) {
- const u32 *_addr;
- u32 addr;
- printk(KERN_DEBUG PFX "found 'deq' node\n");
- _addr = of_get_property(dev, "i2c-address", NULL);
- if (!_addr)
- continue;
- addr = ((*_addr) >> 1) & 0x7f;
- /* now, if the address doesn't match any of the two
- * that a tas3004 can have, we cannot handle this.
- * I doubt it ever happens but hey. */
- if (addr != 0x34 && addr != 0x35)
- continue;
- return tas_create(adapter, dev, addr);
- }
- }
- return -ENODEV;
-}
-
static int tas_i2c_remove(struct i2c_client *client)
{
struct tas *tas = i2c_get_clientdata(client);
@@ -1011,16 +937,16 @@
}
static const struct i2c_device_id tas_i2c_id[] = {
- { "aoa_codec_tas", 0 },
+ { "MAC,tas3004", 0 },
{ }
};
+MODULE_DEVICE_TABLE(i2c,tas_i2c_id);
static struct i2c_driver tas_driver = {
.driver = {
.name = "aoa_codec_tas",
.owner = THIS_MODULE,
},
- .attach_adapter = tas_i2c_attach,
.probe = tas_i2c_probe,
.remove = tas_i2c_remove,
.id_table = tas_i2c_id,
diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index a68aed7..ec2118d 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -502,10 +502,8 @@
if (stream->runtime->state != SNDRV_PCM_STATE_RUNNING)
return -EPERM;
retval = stream->ops->trigger(stream, SNDRV_PCM_TRIGGER_PAUSE_PUSH);
- if (!retval) {
+ if (!retval)
stream->runtime->state = SNDRV_PCM_STATE_PAUSED;
- wake_up(&stream->runtime->sleep);
- }
return retval;
}
@@ -544,6 +542,10 @@
if (!retval) {
stream->runtime->state = SNDRV_PCM_STATE_SETUP;
wake_up(&stream->runtime->sleep);
+ stream->runtime->hw_pointer = 0;
+ stream->runtime->app_pointer = 0;
+ stream->runtime->total_bytes_available = 0;
+ stream->runtime->total_bytes_transferred = 0;
}
return retval;
}
diff --git a/sound/i2c/other/tea575x-tuner.c b/sound/i2c/other/tea575x-tuner.c
index 582aace..7eca25f 100644
--- a/sound/i2c/other/tea575x-tuner.c
+++ b/sound/i2c/other/tea575x-tuner.c
@@ -37,8 +37,8 @@
MODULE_DESCRIPTION("Routines for control of TEA5757/5759 Philips AM/FM radio tuner chips");
MODULE_LICENSE("GPL");
-#define FREQ_LO (76U * 16000)
-#define FREQ_HI (108U * 16000)
+#define FREQ_LO ((tea->tea5759 ? 760 : 875) * 1600U)
+#define FREQ_HI ((tea->tea5759 ? 910 : 1080) * 1600U)
/*
* definitions
@@ -120,9 +120,9 @@
return data;
}
-static u32 snd_tea575x_get_freq(struct snd_tea575x *tea)
+static u32 snd_tea575x_val_to_freq(struct snd_tea575x *tea, u32 val)
{
- u32 freq = snd_tea575x_read(tea) & TEA575X_BIT_FREQ_MASK;
+ u32 freq = val & TEA575X_BIT_FREQ_MASK;
if (freq == 0)
return freq;
@@ -139,6 +139,11 @@
return clamp(freq * 16, FREQ_LO, FREQ_HI); /* from kHz */
}
+static u32 snd_tea575x_get_freq(struct snd_tea575x *tea)
+{
+ return snd_tea575x_val_to_freq(tea, snd_tea575x_read(tea));
+}
+
static void snd_tea575x_set_freq(struct snd_tea575x *tea)
{
u32 freq = tea->freq;
@@ -156,6 +161,7 @@
tea->val &= ~TEA575X_BIT_FREQ_MASK;
tea->val |= freq & TEA575X_BIT_FREQ_MASK;
snd_tea575x_write(tea, tea->val);
+ tea->freq = snd_tea575x_val_to_freq(tea, tea->val);
}
/*
@@ -317,7 +323,6 @@
}
static const struct v4l2_file_operations tea575x_fops = {
- .owner = THIS_MODULE,
.unlocked_ioctl = video_ioctl2,
.open = v4l2_fh_open,
.release = v4l2_fh_release,
@@ -337,7 +342,6 @@
};
static const struct video_device tea575x_radio = {
- .fops = &tea575x_fops,
.ioctl_ops = &tea575x_ioctl_ops,
.release = video_device_release_empty,
};
@@ -349,7 +353,7 @@
/*
* initialize all the tea575x chips
*/
-int snd_tea575x_init(struct snd_tea575x *tea)
+int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner)
{
int retval;
@@ -374,6 +378,9 @@
tea->vd.lock = &tea->mutex;
tea->vd.v4l2_dev = tea->v4l2_dev;
tea->vd.ctrl_handler = &tea->ctrl_handler;
+ tea->fops = tea575x_fops;
+ tea->fops.owner = owner;
+ tea->vd.fops = &tea->fops;
set_bit(V4L2_FL_USE_FH_PRIO, &tea->vd.flags);
/* disable hw_freq_seek if we can't use it */
if (tea->cannot_read_data)
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index 67f47d8..52b5c0b 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -2769,7 +2769,7 @@
chip->tea.ops = &snd_es1968_tea_ops;
strlcpy(chip->tea.card, "SF64-PCE2", sizeof(chip->tea.card));
sprintf(chip->tea.bus_info, "PCI:%s", pci_name(pci));
- if (!snd_tea575x_init(&chip->tea))
+ if (!snd_tea575x_init(&chip->tea, THIS_MODULE))
printk(KERN_INFO "es1968: detected TEA575x radio\n");
#endif
diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
index f696623..b32e802 100644
--- a/sound/pci/fm801.c
+++ b/sound/pci/fm801.c
@@ -1254,7 +1254,7 @@
sprintf(chip->tea.bus_info, "PCI:%s", pci_name(pci));
if ((tea575x_tuner & TUNER_TYPE_MASK) > 0 &&
(tea575x_tuner & TUNER_TYPE_MASK) < 4) {
- if (snd_tea575x_init(&chip->tea)) {
+ if (snd_tea575x_init(&chip->tea, THIS_MODULE)) {
snd_printk(KERN_ERR "TEA575x radio not found\n");
snd_fm801_free(chip);
return -ENODEV;
@@ -1263,7 +1263,7 @@
/* autodetect tuner connection */
for (tea575x_tuner = 1; tea575x_tuner <= 3; tea575x_tuner++) {
chip->tea575x_tuner = tea575x_tuner;
- if (!snd_tea575x_init(&chip->tea)) {
+ if (!snd_tea575x_init(&chip->tea, THIS_MODULE)) {
snd_printk(KERN_INFO "detected TEA575x radio type %s\n",
get_tea575x_gpio(chip)->name);
break;
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index 163b6b5..d030797 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -97,19 +97,6 @@
snd-hda-codec-realtek.
This module is automatically loaded at probing.
-config SND_HDA_ENABLE_REALTEK_QUIRKS
- bool "Build static quirks for Realtek codecs"
- depends on SND_HDA_CODEC_REALTEK
- default y
- help
- Say Y here to build the static quirks codes for Realtek codecs.
- If you need the "model" preset that the default BIOS auto-parser
- can't handle, turn this option on.
-
- If your device works with model=auto option, basically you don't
- need the quirk code. By turning this off, you can reduce the
- module size quite a lot.
-
config SND_HDA_CODEC_ANALOG
bool "Build Analog Device HD-audio codec support"
default y
diff --git a/sound/pci/hda/hda_auto_parser.c b/sound/pci/hda/hda_auto_parser.c
index 6e9ef3e..f7520b9 100644
--- a/sound/pci/hda/hda_auto_parser.c
+++ b/sound/pci/hda/hda_auto_parser.c
@@ -618,7 +618,6 @@
const struct hda_verb *list)
{
const struct hda_verb **v;
- snd_array_init(&spec->verbs, sizeof(struct hda_verb *), 8);
v = snd_array_new(&spec->verbs);
if (!v)
return -ENOMEM;
diff --git a/sound/pci/hda/hda_auto_parser.h b/sound/pci/hda/hda_auto_parser.h
index 2a7889d..632ad0a 100644
--- a/sound/pci/hda/hda_auto_parser.h
+++ b/sound/pci/hda/hda_auto_parser.h
@@ -157,4 +157,14 @@
const struct snd_pci_quirk *quirk,
const struct hda_fixup *fixlist);
+static inline void snd_hda_gen_init(struct hda_gen_spec *spec)
+{
+ snd_array_init(&spec->verbs, sizeof(struct hda_verb *), 8);
+}
+
+static inline void snd_hda_gen_free(struct hda_gen_spec *spec)
+{
+ snd_array_free(&spec->verbs);
+}
+
#endif /* __SOUND_HDA_AUTO_PARSER_H */
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 41ca803..51cb2a2 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -1184,6 +1184,7 @@
{
if (!codec)
return;
+ snd_hda_jack_tbl_clear(codec);
restore_init_pincfgs(codec);
#ifdef CONFIG_SND_HDA_POWER_SAVE
cancel_delayed_work(&codec->power_work);
@@ -1192,6 +1193,7 @@
list_del(&codec->list);
snd_array_free(&codec->mixers);
snd_array_free(&codec->nids);
+ snd_array_free(&codec->cvt_setups);
snd_array_free(&codec->conn_lists);
snd_array_free(&codec->spdif_out);
codec->bus->caddr_tbl[codec->addr] = NULL;
@@ -2333,6 +2335,8 @@
/* free only driver_pins so that init_pins + user_pins are restored */
snd_array_free(&codec->driver_pins);
restore_pincfgs(codec);
+ snd_array_free(&codec->cvt_setups);
+ snd_array_free(&codec->spdif_out);
codec->num_pcms = 0;
codec->pcm_info = NULL;
codec->preset = NULL;
@@ -4393,20 +4397,19 @@
codec->power_jiffies += delta;
}
-/**
- * snd_hda_power_up - Power-up the codec
- * @codec: HD-audio codec
- *
- * Increment the power-up counter and power up the hardware really when
- * not turned on yet.
- */
-void snd_hda_power_up(struct hda_codec *codec)
+/* Transition to powered up, if wait_power_down then wait for a pending
+ * transition to D3 to complete. A pending D3 transition is indicated
+ * with power_transition == -1. */
+static void __snd_hda_power_up(struct hda_codec *codec, bool wait_power_down)
{
struct hda_bus *bus = codec->bus;
spin_lock(&codec->power_lock);
codec->power_count++;
- if (codec->power_on || codec->power_transition > 0) {
+ /* Return if power_on or transitioning to power_on, unless currently
+ * powering down. */
+ if ((codec->power_on || codec->power_transition > 0) &&
+ !(wait_power_down && codec->power_transition < 0)) {
spin_unlock(&codec->power_lock);
return;
}
@@ -4430,8 +4433,37 @@
codec->power_transition = 0;
spin_unlock(&codec->power_lock);
}
+
+/**
+ * snd_hda_power_up - Power-up the codec
+ * @codec: HD-audio codec
+ *
+ * Increment the power-up counter and power up the hardware really when
+ * not turned on yet.
+ */
+void snd_hda_power_up(struct hda_codec *codec)
+{
+ __snd_hda_power_up(codec, false);
+}
EXPORT_SYMBOL_HDA(snd_hda_power_up);
+/**
+ * snd_hda_power_up_d3wait - Power-up the codec after waiting for any pending
+ * D3 transition to complete. This differs from snd_hda_power_up() when
+ * power_transition == -1. snd_hda_power_up sees this case as a nop,
+ * snd_hda_power_up_d3wait waits for the D3 transition to complete then powers
+ * back up.
+ * @codec: HD-audio codec
+ *
+ * Cancel any power down operation hapenning on the work queue, then power up.
+ */
+void snd_hda_power_up_d3wait(struct hda_codec *codec)
+{
+ /* This will cancel and wait for pending power_work to complete. */
+ __snd_hda_power_up(codec, true);
+}
+EXPORT_SYMBOL_HDA(snd_hda_power_up_d3wait);
+
#define power_save(codec) \
((codec)->bus->power_save ? *(codec)->bus->power_save : 0)
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 4fc3960..2fdaadb 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -1056,10 +1056,12 @@
*/
#ifdef CONFIG_SND_HDA_POWER_SAVE
void snd_hda_power_up(struct hda_codec *codec);
+void snd_hda_power_up_d3wait(struct hda_codec *codec);
void snd_hda_power_down(struct hda_codec *codec);
void snd_hda_update_power_acct(struct hda_codec *codec);
#else
static inline void snd_hda_power_up(struct hda_codec *codec) {}
+static inline void snd_hda_power_up_d3wait(struct hda_codec *codec) {}
static inline void snd_hda_power_down(struct hda_codec *codec) {}
#endif
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 2b6392b..7757536 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1766,7 +1766,7 @@
buff_step);
snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
buff_step);
- snd_hda_power_up(apcm->codec);
+ snd_hda_power_up_d3wait(apcm->codec);
err = hinfo->ops.open(hinfo, apcm->codec, substream);
if (err < 0) {
azx_release_device(azx_dev);
@@ -2484,9 +2484,9 @@
static int DELAYED_INIT_MARK azx_first_init(struct azx *chip);
static int DELAYED_INIT_MARK azx_probe_continue(struct azx *chip);
+#ifdef SUPPORT_VGA_SWITCHEROO
static struct pci_dev __devinit *get_bound_vga(struct pci_dev *pci);
-#ifdef SUPPORT_VGA_SWITCHEROO
static void azx_vs_set_state(struct pci_dev *pci,
enum vga_switcheroo_state state)
{
@@ -2578,6 +2578,7 @@
#else
#define init_vga_switcheroo(chip) /* NOP */
#define register_vga_switcheroo(chip) 0
+#define check_hdmi_disabled(pci) false
#endif /* SUPPORT_VGA_SWITCHER */
/*
@@ -2638,6 +2639,7 @@
return azx_free(device->device_data);
}
+#ifdef SUPPORT_VGA_SWITCHEROO
/*
* Check of disabled HDMI controller by vga-switcheroo
*/
@@ -2670,12 +2672,13 @@
struct pci_dev *p = get_bound_vga(pci);
if (p) {
- if (vga_default_device() && p != vga_default_device())
+ if (vga_switcheroo_get_client_state(p) == VGA_SWITCHEROO_OFF)
vga_inactive = true;
pci_dev_put(p);
}
return vga_inactive;
}
+#endif /* SUPPORT_VGA_SWITCHEROO */
/*
* white/black-listing for position_fix
@@ -3351,6 +3354,11 @@
{ PCI_DEVICE(0x6549, 0x1200),
.driver_data = AZX_DRIVER_TERA | AZX_DCAPS_NO_64BIT },
/* Creative X-Fi (CA0110-IBG) */
+ /* CTHDA chips */
+ { PCI_DEVICE(0x1102, 0x0010),
+ .driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA },
+ { PCI_DEVICE(0x1102, 0x0012),
+ .driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA },
#if !defined(CONFIG_SND_CTXFI) && !defined(CONFIG_SND_CTXFI_MODULE)
/* the following entry conflicts with snd-ctxfi driver,
* as ctxfi driver mutates from HD-audio to native mode with
@@ -3367,11 +3375,6 @@
.driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND |
AZX_DCAPS_RIRB_PRE_DELAY | AZX_DCAPS_POSFIX_LPIB },
#endif
- /* CTHDA chips */
- { PCI_DEVICE(0x1102, 0x0010),
- .driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA },
- { PCI_DEVICE(0x1102, 0x0012),
- .driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA },
/* Vortex86MX */
{ PCI_DEVICE(0x17f3, 0x3010), .driver_data = AZX_DRIVER_GENERIC },
/* VMware HDAudio */
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 3acb582..2bf99fc 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -445,8 +445,10 @@
static void conexant_free(struct hda_codec *codec)
{
+ struct conexant_spec *spec = codec->spec;
+ snd_hda_gen_free(&spec->gen);
snd_hda_detach_beep_device(codec);
- kfree(codec->spec);
+ kfree(spec);
}
static const struct snd_kcontrol_new cxt_capture_mixers[] = {
@@ -4061,7 +4063,7 @@
static int cx_auto_init(struct hda_codec *codec)
{
struct conexant_spec *spec = codec->spec;
- /*snd_hda_sequence_write(codec, cx_auto_init_verbs);*/
+ snd_hda_gen_apply_verbs(codec);
cx_auto_init_output(codec);
cx_auto_init_input(codec);
cx_auto_init_digital(codec);
@@ -4466,6 +4468,7 @@
SND_PCI_QUIRK(0x17aa, 0x21ce, "Lenovo T420", CXT_PINCFG_LENOVO_TP410),
SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520", CXT_PINCFG_LENOVO_TP410),
SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC),
+ SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC),
{}
};
@@ -4497,6 +4500,7 @@
if (!spec)
return -ENOMEM;
codec->spec = spec;
+ snd_hda_gen_init(&spec->gen);
switch (codec->vendor_id) {
case 0x14f15045:
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 224410e..aa4c25e 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1896,6 +1896,7 @@
alc_fix_pll(codec);
alc_auto_init_amp(codec, spec->init_amp);
+ snd_hda_gen_apply_verbs(codec);
alc_init_special_input_src(codec);
alc_auto_init_std(codec);
@@ -2288,6 +2289,7 @@
alc_shutup(codec);
alc_free_kctls(codec);
alc_free_bind_ctls(codec);
+ snd_hda_gen_free(&spec->gen);
kfree(spec);
snd_hda_detach_beep_device(codec);
}
@@ -4252,6 +4254,7 @@
return -ENOMEM;
codec->spec = spec;
spec->mixer_nid = mixer_nid;
+ snd_hda_gen_init(&spec->gen);
err = alc_codec_rename_from_preset(codec);
if (err < 0) {
@@ -6439,6 +6442,7 @@
ALC662_FIXUP_ASUS_MODE7,
ALC662_FIXUP_ASUS_MODE8,
ALC662_FIXUP_NO_JACK_DETECT,
+ ALC662_FIXUP_ZOTAC_Z68,
};
static const struct alc_fixup alc662_fixups[] = {
@@ -6588,6 +6592,13 @@
.type = ALC_FIXUP_FUNC,
.v.func = alc_fixup_no_jack_detect,
},
+ [ALC662_FIXUP_ZOTAC_Z68] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x1b, 0x02214020 }, /* Front HP */
+ { }
+ }
+ },
};
static const struct snd_pci_quirk alc662_fixup_tbl[] = {
@@ -6601,6 +6612,7 @@
SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),
+ SND_PCI_QUIRK(0x19da, 0xa130, "Zotac Z68", ALC662_FIXUP_ZOTAC_Z68),
SND_PCI_QUIRK(0x1b35, 0x2206, "CZC P10T", ALC662_FIXUP_CZC_P10T),
#if 0
@@ -6676,6 +6688,31 @@
{}
};
+static void alc662_fill_coef(struct hda_codec *codec)
+{
+ int val, coef;
+
+ coef = alc_get_coef0(codec);
+
+ switch (codec->vendor_id) {
+ case 0x10ec0662:
+ if ((coef & 0x00f0) == 0x0030) {
+ val = alc_read_coef_idx(codec, 0x4); /* EAPD Ctrl */
+ alc_write_coef_idx(codec, 0x4, val & ~(1<<10));
+ }
+ break;
+ case 0x10ec0272:
+ case 0x10ec0273:
+ case 0x10ec0663:
+ case 0x10ec0665:
+ case 0x10ec0670:
+ case 0x10ec0671:
+ case 0x10ec0672:
+ val = alc_read_coef_idx(codec, 0xd); /* EAPD Ctrl */
+ alc_write_coef_idx(codec, 0xd, val | (1<<14));
+ break;
+ }
+}
/*
*/
@@ -6695,12 +6732,8 @@
alc_fix_pll_init(codec, 0x20, 0x04, 15);
- if ((alc_get_coef0(codec) & (1 << 14)) &&
- codec->bus->pci->subsystem_vendor == 0x1025 &&
- spec->cdefine.platform_type == 1) {
- if (alc_codec_rename(codec, "ALC272X") < 0)
- goto error;
- }
+ spec->init_hook = alc662_fill_coef;
+ alc662_fill_coef(codec);
alc_pick_fixup(codec, alc662_fixup_models,
alc662_fixup_tbl, alc662_fixups);
@@ -6708,6 +6741,13 @@
alc_auto_parse_customize_define(codec);
+ if ((alc_get_coef0(codec) & (1 << 14)) &&
+ codec->bus->pci->subsystem_vendor == 0x1025 &&
+ spec->cdefine.platform_type == 1) {
+ if (alc_codec_rename(codec, "ALC272X") < 0)
+ goto error;
+ }
+
/* automatic parse from the BIOS config */
err = alc662_parse_auto_config(codec);
if (err < 0)
@@ -6790,6 +6830,7 @@
{ .id = 0x10ec0272, .name = "ALC272", .patch = patch_alc662 },
{ .id = 0x10ec0275, .name = "ALC275", .patch = patch_alc269 },
{ .id = 0x10ec0276, .name = "ALC276", .patch = patch_alc269 },
+ { .id = 0x10ec0280, .name = "ALC280", .patch = patch_alc269 },
{ .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660",
.patch = patch_alc861 },
{ .id = 0x10ec0660, .name = "ALC660-VD", .patch = patch_alc861vd },
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 7db8228..0767528 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -4367,7 +4367,7 @@
AC_PINCTL_IN_EN);
for (i = 0; i < spec->num_pwrs; i++) {
hda_nid_t nid = spec->pwr_nids[i];
- int pinctl, def_conf;
+ unsigned int pinctl, def_conf;
def_conf = snd_hda_codec_get_pincfg(codec, nid);
def_conf = get_defcfg_connect(def_conf);
@@ -4376,6 +4376,11 @@
stac_toggle_power_map(codec, nid, 0);
continue;
}
+ if (def_conf == AC_JACK_PORT_FIXED) {
+ /* no need for jack detection for fixed pins */
+ stac_toggle_power_map(codec, nid, 1);
+ continue;
+ }
/* power on when no jack detection is available */
/* or when the VREF is used for controlling LED */
if (!spec->hp_detect ||
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 64d2a4f..e9b62b5 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -935,9 +935,7 @@
}
found:
- data = snd_soc_read(codec, AIC3X_PLL_PROGA_REG);
- snd_soc_write(codec, AIC3X_PLL_PROGA_REG,
- data | (pll_p << PLLP_SHIFT));
+ snd_soc_update_bits(codec, AIC3X_PLL_PROGA_REG, PLLP_MASK, pll_p);
snd_soc_write(codec, AIC3X_OVRF_STATUS_AND_PLLR_REG,
pll_r << PLLR_SHIFT);
snd_soc_write(codec, AIC3X_PLL_PROGB_REG, pll_j << PLLJ_SHIFT);
diff --git a/sound/soc/codecs/tlv320aic3x.h b/sound/soc/codecs/tlv320aic3x.h
index 6f097fb..08c7f66 100644
--- a/sound/soc/codecs/tlv320aic3x.h
+++ b/sound/soc/codecs/tlv320aic3x.h
@@ -166,6 +166,7 @@
/* PLL registers bitfields */
#define PLLP_SHIFT 0
+#define PLLP_MASK 7
#define PLLQ_SHIFT 3
#define PLLR_SHIFT 0
#define PLLJ_SHIFT 2
diff --git a/sound/soc/codecs/wm2000.c b/sound/soc/codecs/wm2000.c
index a75c376..0418fa1 100644
--- a/sound/soc/codecs/wm2000.c
+++ b/sound/soc/codecs/wm2000.c
@@ -99,8 +99,9 @@
}
static int wm2000_poll_bit(struct i2c_client *i2c,
- unsigned int reg, u8 mask, int timeout)
+ unsigned int reg, u8 mask)
{
+ int timeout = 4000;
int val;
val = wm2000_read(i2c, reg);
@@ -119,7 +120,7 @@
static int wm2000_power_up(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
- int ret, timeout;
+ int ret;
BUG_ON(wm2000->anc_mode != ANC_OFF);
@@ -140,13 +141,13 @@
/* Wait for ANC engine to become ready */
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
- WM2000_ANC_ENG_IDLE, 1)) {
+ WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev, "ANC engine failed to reset\n");
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
- WM2000_STATUS_BOOT_COMPLETE, 1)) {
+ WM2000_STATUS_BOOT_COMPLETE)) {
dev_err(&i2c->dev, "ANC engine failed to initialise\n");
return -ETIMEDOUT;
}
@@ -173,16 +174,13 @@
dev_dbg(&i2c->dev, "Download complete\n");
if (analogue) {
- timeout = 248;
- wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, timeout / 4);
+ wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_MOUSE_ENABLE |
WM2000_MODE_THERMAL_ENABLE);
} else {
- timeout = 10;
-
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_MOUSE_ENABLE |
WM2000_MODE_THERMAL_ENABLE);
@@ -201,9 +199,8 @@
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
- WM2000_STATUS_MOUSE_ACTIVE, timeout)) {
- dev_err(&i2c->dev, "Timed out waiting for device after %dms\n",
- timeout * 10);
+ WM2000_STATUS_MOUSE_ACTIVE)) {
+ dev_err(&i2c->dev, "Timed out waiting for device\n");
return -ETIMEDOUT;
}
@@ -218,28 +215,25 @@
static int wm2000_power_down(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
- int timeout;
if (analogue) {
- timeout = 248;
- wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, timeout / 4);
+ wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_POWER_DOWN);
} else {
- timeout = 10;
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_POWER_DOWN);
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
- WM2000_STATUS_POWER_DOWN_COMPLETE, timeout)) {
+ WM2000_STATUS_POWER_DOWN_COMPLETE)) {
dev_err(&i2c->dev, "Timeout waiting for ANC power down\n");
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
- WM2000_ANC_ENG_IDLE, 1)) {
+ WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n");
return -ETIMEDOUT;
}
@@ -268,13 +262,13 @@
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
- WM2000_STATUS_ANC_DISABLED, 10)) {
+ WM2000_STATUS_ANC_DISABLED)) {
dev_err(&i2c->dev, "Timeout waiting for ANC disable\n");
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
- WM2000_ANC_ENG_IDLE, 1)) {
+ WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n");
return -ETIMEDOUT;
}
@@ -311,7 +305,7 @@
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
- WM2000_STATUS_MOUSE_ACTIVE, 10)) {
+ WM2000_STATUS_MOUSE_ACTIVE)) {
dev_err(&i2c->dev, "Timed out waiting for MOUSE\n");
return -ETIMEDOUT;
}
@@ -325,38 +319,32 @@
static int wm2000_enter_standby(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
- int timeout;
BUG_ON(wm2000->anc_mode != ANC_ACTIVE);
if (analogue) {
- timeout = 248;
- wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, timeout / 4);
+ wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_STANDBY_ENTRY);
} else {
- timeout = 10;
-
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_STANDBY_ENTRY);
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
- WM2000_STATUS_ANC_DISABLED, timeout)) {
+ WM2000_STATUS_ANC_DISABLED)) {
dev_err(&i2c->dev,
"Timed out waiting for ANC disable after 1ms\n");
return -ETIMEDOUT;
}
- if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, WM2000_ANC_ENG_IDLE,
- 1)) {
+ if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev,
- "Timed out waiting for standby after %dms\n",
- timeout * 10);
+ "Timed out waiting for standby\n");
return -ETIMEDOUT;
}
@@ -374,23 +362,19 @@
static int wm2000_exit_standby(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
- int timeout;
BUG_ON(wm2000->anc_mode != ANC_STANDBY);
wm2000_write(i2c, WM2000_REG_SYS_CTL1, 0);
if (analogue) {
- timeout = 248;
- wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, timeout / 4);
+ wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_MOUSE_ENABLE);
} else {
- timeout = 10;
-
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_MOUSE_ENABLE);
@@ -400,9 +384,8 @@
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
- WM2000_STATUS_MOUSE_ACTIVE, timeout)) {
- dev_err(&i2c->dev, "Timed out waiting for MOUSE after %dms\n",
- timeout * 10);
+ WM2000_STATUS_MOUSE_ACTIVE)) {
+ dev_err(&i2c->dev, "Timed out waiting for MOUSE\n");
return -ETIMEDOUT;
}
diff --git a/sound/soc/codecs/wm2200.c b/sound/soc/codecs/wm2200.c
index acbdc5f..32682c1 100644
--- a/sound/soc/codecs/wm2200.c
+++ b/sound/soc/codecs/wm2200.c
@@ -1491,6 +1491,7 @@
static int wm2200_bclk_rates_cd[WM2200_NUM_BCLK_RATES] = {
5644800,
+ 3763200,
2882400,
1881600,
1411200,
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index 65d525d..812acd8 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -1863,6 +1863,7 @@
return ret;
}
+ regcache_cache_only(wm8904->regmap, false);
regcache_sync(wm8904->regmap);
/* Enable bias */
@@ -1899,14 +1900,8 @@
snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
WM8904_BIAS_ENA, 0);
-#ifdef CONFIG_REGULATOR
- /* Post 2.6.34 we will be able to get a callback when
- * the regulators are disabled which we can use but
- * for now just assume that the power will be cut if
- * the regulator API is in use.
- */
- codec->cache_sync = 1;
-#endif
+ regcache_cache_only(wm8904->regmap, true);
+ regcache_mark_dirty(wm8904->regmap);
regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies),
wm8904->supplies);
@@ -2084,10 +2079,8 @@
{
struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
struct wm8904_pdata *pdata = wm8904->pdata;
- u16 *reg_cache = codec->reg_cache;
int ret, i;
- codec->cache_sync = 1;
codec->control_data = wm8904->regmap;
switch (wm8904->devtype) {
@@ -2150,6 +2143,7 @@
goto err_enable;
}
+ regcache_cache_only(wm8904->regmap, true);
/* Change some default settings - latch VU and enable ZC */
snd_soc_update_bits(codec, WM8904_ADC_DIGITAL_VOLUME_LEFT,
WM8904_ADC_VU, WM8904_ADC_VU);
@@ -2180,14 +2174,18 @@
if (!pdata->gpio_cfg[i])
continue;
- reg_cache[WM8904_GPIO_CONTROL_1 + i]
- = pdata->gpio_cfg[i] & 0xffff;
+ regmap_update_bits(wm8904->regmap,
+ WM8904_GPIO_CONTROL_1 + i,
+ 0xffff,
+ pdata->gpio_cfg[i]);
}
/* Zero is the default value for these anyway */
for (i = 0; i < WM8904_MIC_REGS; i++)
- reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i]
- = pdata->mic_cfg[i];
+ regmap_update_bits(wm8904->regmap,
+ WM8904_MIC_BIAS_CONTROL_0 + i,
+ 0xffff,
+ pdata->mic_cfg[i]);
}
/* Set Class W by default - this will be managed by the Class
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 993639d..1436b6c 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -46,6 +46,39 @@
#define WM8994_NUM_DRC 3
#define WM8994_NUM_EQ 3
+static struct {
+ unsigned int reg;
+ unsigned int mask;
+} wm8994_vu_bits[] = {
+ { WM8994_LEFT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU },
+ { WM8994_RIGHT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU },
+ { WM8994_LEFT_LINE_INPUT_3_4_VOLUME, WM8994_IN2_VU },
+ { WM8994_RIGHT_LINE_INPUT_3_4_VOLUME, WM8994_IN2_VU },
+ { WM8994_SPEAKER_VOLUME_LEFT, WM8994_SPKOUT_VU },
+ { WM8994_SPEAKER_VOLUME_RIGHT, WM8994_SPKOUT_VU },
+ { WM8994_LEFT_OUTPUT_VOLUME, WM8994_HPOUT1_VU },
+ { WM8994_RIGHT_OUTPUT_VOLUME, WM8994_HPOUT1_VU },
+ { WM8994_LEFT_OPGA_VOLUME, WM8994_MIXOUT_VU },
+ { WM8994_RIGHT_OPGA_VOLUME, WM8994_MIXOUT_VU },
+
+ { WM8994_AIF1_DAC1_LEFT_VOLUME, WM8994_AIF1DAC1_VU },
+ { WM8994_AIF1_DAC1_RIGHT_VOLUME, WM8994_AIF1DAC1_VU },
+ { WM8994_AIF1_DAC2_LEFT_VOLUME, WM8994_AIF1DAC2_VU },
+ { WM8994_AIF1_DAC2_RIGHT_VOLUME, WM8994_AIF1DAC2_VU },
+ { WM8994_AIF2_DAC_LEFT_VOLUME, WM8994_AIF2DAC_VU },
+ { WM8994_AIF2_DAC_RIGHT_VOLUME, WM8994_AIF2DAC_VU },
+ { WM8994_AIF1_ADC1_LEFT_VOLUME, WM8994_AIF1ADC1_VU },
+ { WM8994_AIF1_ADC1_RIGHT_VOLUME, WM8994_AIF1ADC1_VU },
+ { WM8994_AIF1_ADC2_LEFT_VOLUME, WM8994_AIF1ADC2_VU },
+ { WM8994_AIF1_ADC2_RIGHT_VOLUME, WM8994_AIF1ADC2_VU },
+ { WM8994_AIF2_ADC_LEFT_VOLUME, WM8994_AIF2ADC_VU },
+ { WM8994_AIF2_ADC_RIGHT_VOLUME, WM8994_AIF1ADC2_VU },
+ { WM8994_DAC1_LEFT_VOLUME, WM8994_DAC1_VU },
+ { WM8994_DAC1_RIGHT_VOLUME, WM8994_DAC1_VU },
+ { WM8994_DAC2_LEFT_VOLUME, WM8994_DAC2_VU },
+ { WM8994_DAC2_RIGHT_VOLUME, WM8994_DAC2_VU },
+};
+
static int wm8994_drc_base[] = {
WM8994_AIF1_DRC1_1,
WM8994_AIF1_DRC2_1,
@@ -694,9 +727,6 @@
if (!wm8994->jackdet || !wm8994->jack_cb)
return;
- if (!wm8994->jackdet || !wm8994->jack_cb)
- return;
-
if (wm8994->active_refcount)
mode = WM1811_JACKDET_MODE_AUDIO;
@@ -989,6 +1019,7 @@
struct snd_soc_codec *codec = w->codec;
struct wm8994 *control = codec->control_data;
int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA;
+ int i;
int dac;
int adc;
int val;
@@ -1047,6 +1078,13 @@
WM8994_AIF1DAC2L_ENA);
break;
+ case SND_SOC_DAPM_POST_PMU:
+ for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
+ snd_soc_write(codec, wm8994_vu_bits[i].reg,
+ snd_soc_read(codec,
+ wm8994_vu_bits[i].reg));
+ break;
+
case SND_SOC_DAPM_PRE_PMD:
case SND_SOC_DAPM_POST_PMD:
snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5,
@@ -1072,6 +1110,7 @@
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
+ int i;
int dac;
int adc;
int val;
@@ -1122,6 +1161,13 @@
WM8994_AIF2DACR_ENA);
break;
+ case SND_SOC_DAPM_POST_PMU:
+ for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
+ snd_soc_write(codec, wm8994_vu_bits[i].reg,
+ snd_soc_read(codec,
+ wm8994_vu_bits[i].reg));
+ break;
+
case SND_SOC_DAPM_PRE_PMD:
case SND_SOC_DAPM_POST_PMD:
snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5,
@@ -1190,17 +1236,19 @@
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
if (wm8994->aif1clk_enable) {
- aif1clk_ev(w, kcontrol, event);
+ aif1clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMU);
snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
WM8994_AIF1CLK_ENA_MASK,
WM8994_AIF1CLK_ENA);
+ aif1clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMU);
wm8994->aif1clk_enable = 0;
}
if (wm8994->aif2clk_enable) {
- aif2clk_ev(w, kcontrol, event);
+ aif2clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMU);
snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
WM8994_AIF2CLK_ENA_MASK,
WM8994_AIF2CLK_ENA);
+ aif2clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMU);
wm8994->aif2clk_enable = 0;
}
break;
@@ -1221,15 +1269,17 @@
switch (event) {
case SND_SOC_DAPM_POST_PMD:
if (wm8994->aif1clk_disable) {
+ aif1clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMD);
snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
WM8994_AIF1CLK_ENA_MASK, 0);
- aif1clk_ev(w, kcontrol, event);
+ aif1clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMD);
wm8994->aif1clk_disable = 0;
}
if (wm8994->aif2clk_disable) {
+ aif2clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMD);
snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
WM8994_AIF2CLK_ENA_MASK, 0);
- aif2clk_ev(w, kcontrol, event);
+ aif2clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMD);
wm8994->aif2clk_disable = 0;
}
break;
@@ -1527,9 +1577,11 @@
static const struct snd_soc_dapm_widget wm8994_lateclk_widgets[] = {
SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, aif1clk_ev,
- SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+ SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, aif2clk_ev,
- SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+ SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_PGA("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_MIXER("SPKL", WM8994_POWER_MANAGEMENT_3, 8, 0,
left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
@@ -3879,39 +3931,11 @@
pm_runtime_put(codec->dev);
- /* Latch volume updates (right only; we always do left then right). */
- snd_soc_update_bits(codec, WM8994_AIF1_DAC1_LEFT_VOLUME,
- WM8994_AIF1DAC1_VU, WM8994_AIF1DAC1_VU);
- snd_soc_update_bits(codec, WM8994_AIF1_DAC1_RIGHT_VOLUME,
- WM8994_AIF1DAC1_VU, WM8994_AIF1DAC1_VU);
- snd_soc_update_bits(codec, WM8994_AIF1_DAC2_LEFT_VOLUME,
- WM8994_AIF1DAC2_VU, WM8994_AIF1DAC2_VU);
- snd_soc_update_bits(codec, WM8994_AIF1_DAC2_RIGHT_VOLUME,
- WM8994_AIF1DAC2_VU, WM8994_AIF1DAC2_VU);
- snd_soc_update_bits(codec, WM8994_AIF2_DAC_LEFT_VOLUME,
- WM8994_AIF2DAC_VU, WM8994_AIF2DAC_VU);
- snd_soc_update_bits(codec, WM8994_AIF2_DAC_RIGHT_VOLUME,
- WM8994_AIF2DAC_VU, WM8994_AIF2DAC_VU);
- snd_soc_update_bits(codec, WM8994_AIF1_ADC1_LEFT_VOLUME,
- WM8994_AIF1ADC1_VU, WM8994_AIF1ADC1_VU);
- snd_soc_update_bits(codec, WM8994_AIF1_ADC1_RIGHT_VOLUME,
- WM8994_AIF1ADC1_VU, WM8994_AIF1ADC1_VU);
- snd_soc_update_bits(codec, WM8994_AIF1_ADC2_LEFT_VOLUME,
- WM8994_AIF1ADC2_VU, WM8994_AIF1ADC2_VU);
- snd_soc_update_bits(codec, WM8994_AIF1_ADC2_RIGHT_VOLUME,
- WM8994_AIF1ADC2_VU, WM8994_AIF1ADC2_VU);
- snd_soc_update_bits(codec, WM8994_AIF2_ADC_LEFT_VOLUME,
- WM8994_AIF2ADC_VU, WM8994_AIF1ADC2_VU);
- snd_soc_update_bits(codec, WM8994_AIF2_ADC_RIGHT_VOLUME,
- WM8994_AIF2ADC_VU, WM8994_AIF1ADC2_VU);
- snd_soc_update_bits(codec, WM8994_DAC1_LEFT_VOLUME,
- WM8994_DAC1_VU, WM8994_DAC1_VU);
- snd_soc_update_bits(codec, WM8994_DAC1_RIGHT_VOLUME,
- WM8994_DAC1_VU, WM8994_DAC1_VU);
- snd_soc_update_bits(codec, WM8994_DAC2_LEFT_VOLUME,
- WM8994_DAC2_VU, WM8994_DAC2_VU);
- snd_soc_update_bits(codec, WM8994_DAC2_RIGHT_VOLUME,
- WM8994_DAC2_VU, WM8994_DAC2_VU);
+ /* Latch volume update bits */
+ for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
+ snd_soc_update_bits(codec, wm8994_vu_bits[i].reg,
+ wm8994_vu_bits[i].mask,
+ wm8994_vu_bits[i].mask);
/* Set the low bit of the 3D stereo depth so TLV matches */
snd_soc_update_bits(codec, WM8994_AIF1_DAC1_FILTERS_2,
diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c
index 8af422e..dc9b42b 100644
--- a/sound/soc/codecs/wm8996.c
+++ b/sound/soc/codecs/wm8996.c
@@ -2837,8 +2837,6 @@
}
}
- regcache_cache_only(codec->control_data, true);
-
/* Apply platform data settings */
snd_soc_update_bits(codec, WM8996_LINE_INPUT_CONTROL,
WM8996_INL_MODE_MASK | WM8996_INR_MODE_MASK,
@@ -3051,7 +3049,6 @@
for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++)
regulator_unregister_notifier(wm8996->supplies[i].consumer,
&wm8996->disable_nb[i]);
- regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
return 0;
}
@@ -3206,14 +3203,15 @@
dev_info(&i2c->dev, "revision %c\n",
(reg & WM8996_CHIP_REV_MASK) + 'A');
- regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
-
ret = wm8996_reset(wm8996);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to issue reset\n");
goto err_regmap;
}
+ regcache_cache_only(wm8996->regmap, true);
+ regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
+
wm8996_init_gpio(wm8996);
ret = snd_soc_register_codec(&i2c->dev,
diff --git a/sound/soc/fsl/imx-audmux.c b/sound/soc/fsl/imx-audmux.c
index f237003..0803274 100644
--- a/sound/soc/fsl/imx-audmux.c
+++ b/sound/soc/fsl/imx-audmux.c
@@ -26,6 +26,7 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/pinctrl/consumer.h>
#include "imx-audmux.h"
@@ -249,6 +250,7 @@
static int __devinit imx_audmux_probe(struct platform_device *pdev)
{
struct resource *res;
+ struct pinctrl *pinctrl;
const struct of_device_id *of_id =
of_match_device(imx_audmux_dt_ids, &pdev->dev);
@@ -257,6 +259,12 @@
if (!audmux_base)
return -EADDRNOTAVAIL;
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl)) {
+ dev_err(&pdev->dev, "setup pinctrl failed!");
+ return PTR_ERR(pinctrl);
+ }
+
audmux_clk = clk_get(&pdev->dev, "audmux");
if (IS_ERR(audmux_clk)) {
dev_dbg(&pdev->dev, "cannot get clock: %ld\n",
diff --git a/sound/soc/fsl/imx-pcm-fiq.c b/sound/soc/fsl/imx-pcm-fiq.c
index 456b7d7..ee27ba3 100644
--- a/sound/soc/fsl/imx-pcm-fiq.c
+++ b/sound/soc/fsl/imx-pcm-fiq.c
@@ -29,6 +29,7 @@
#include <asm/fiq.h>
+#include <mach/irqs.h>
#include <mach/ssi.h>
#include "imx-ssi.h"
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 1c2aa7f..4da5fc5 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -33,7 +33,6 @@
#include <mach/hardware.h>
#include <mach/dma.h>
-#include <mach/audio.h>
#include "../../arm/pxa2xx-pcm.h"
#include "pxa-ssp.h"
@@ -194,7 +193,7 @@
{
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
- if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) {
+ if (ssp->type == PXA25x_SSP) {
sscr0 &= ~0x0000ff00;
sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
} else {
@@ -212,7 +211,7 @@
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
u32 div;
- if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP)
+ if (ssp->type == PXA25x_SSP)
div = ((sscr0 >> 8) & 0xff) * 2 + 2;
else
div = ((sscr0 >> 8) & 0xfff) + 1;
@@ -242,7 +241,7 @@
break;
case PXA_SSP_CLK_PLL:
/* Internal PLL is fixed */
- if (cpu_is_pxa25x())
+ if (ssp->type == PXA25x_SSP)
priv->sysclk = 1843200;
else
priv->sysclk = 13000000;
@@ -266,11 +265,11 @@
/* The SSP clock must be disabled when changing SSP clock mode
* on PXA2xx. On PXA3xx it must be enabled when doing so. */
- if (!cpu_is_pxa3xx())
+ if (ssp->type != PXA3xx_SSP)
clk_disable(ssp->clk);
val = pxa_ssp_read_reg(ssp, SSCR0) | sscr0;
pxa_ssp_write_reg(ssp, SSCR0, val);
- if (!cpu_is_pxa3xx())
+ if (ssp->type != PXA3xx_SSP)
clk_enable(ssp->clk);
return 0;
@@ -294,24 +293,20 @@
case PXA_SSP_AUDIO_DIV_SCDB:
val = pxa_ssp_read_reg(ssp, SSACD);
val &= ~SSACD_SCDB;
-#if defined(CONFIG_PXA3xx)
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
val &= ~SSACD_SCDX8;
-#endif
switch (div) {
case PXA_SSP_CLK_SCDB_1:
val |= SSACD_SCDB;
break;
case PXA_SSP_CLK_SCDB_4:
break;
-#if defined(CONFIG_PXA3xx)
case PXA_SSP_CLK_SCDB_8:
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
val |= SSACD_SCDX8;
else
return -EINVAL;
break;
-#endif
default:
return -EINVAL;
}
@@ -337,10 +332,8 @@
struct ssp_device *ssp = priv->ssp;
u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70;
-#if defined(CONFIG_PXA3xx)
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
pxa_ssp_write_reg(ssp, SSACDD, 0);
-#endif
switch (freq_out) {
case 5622000:
@@ -365,11 +358,10 @@
break;
default:
-#ifdef CONFIG_PXA3xx
/* PXA3xx has a clock ditherer which can be used to generate
* a wider range of frequencies - calculate a value for it.
*/
- if (cpu_is_pxa3xx()) {
+ if (ssp->type == PXA3xx_SSP) {
u32 val;
u64 tmp = 19968;
tmp *= 1000000;
@@ -386,7 +378,6 @@
val, freq_out);
break;
}
-#endif
return -EINVAL;
}
@@ -590,10 +581,8 @@
/* bit size */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
-#ifdef CONFIG_PXA3xx
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
sscr0 |= SSCR0_FPCKE;
-#endif
sscr0 |= SSCR0_DataSize(16);
break;
case SNDRV_PCM_FORMAT_S24_LE:
@@ -618,9 +607,7 @@
* trying and failing a lot; some of the registers
* needed for that mode are only available on PXA3xx.
*/
-
-#ifdef CONFIG_PXA3xx
- if (!cpu_is_pxa3xx())
+ if (ssp->type != PXA3xx_SSP)
return -EINVAL;
sspsp |= SSPSP_SFRMWDTH(width * 2);
@@ -628,9 +615,6 @@
sspsp |= SSPSP_EDMYSTOP(3);
sspsp |= SSPSP_DMYSTOP(3);
sspsp |= SSPSP_DMYSTRT(1);
-#else
- return -EINVAL;
-#endif
} else {
/* The frame width is the width the LRCLK is
* asserted for; the delay is expressed in
diff --git a/sound/soc/samsung/dma.c b/sound/soc/samsung/dma.c
index ddc6cde..f3ebc38 100644
--- a/sound/soc/samsung/dma.c
+++ b/sound/soc/samsung/dma.c
@@ -74,7 +74,7 @@
struct runtime_data *prtd = substream->runtime->private_data;
dma_addr_t pos = prtd->dma_pos;
unsigned int limit;
- struct samsung_dma_prep_info dma_info;
+ struct samsung_dma_prep dma_info;
pr_debug("Entered %s\n", __func__);
@@ -146,7 +146,8 @@
unsigned long totbytes = params_buffer_bytes(params);
struct s3c_dma_params *dma =
snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
- struct samsung_dma_info dma_info;
+ struct samsung_dma_req req;
+ struct samsung_dma_config config;
pr_debug("Entered %s\n", __func__);
@@ -166,16 +167,17 @@
prtd->params->ops = samsung_dma_get_ops();
- dma_info.cap = (samsung_dma_has_circular() ?
+ req.cap = (samsung_dma_has_circular() ?
DMA_CYCLIC : DMA_SLAVE);
- dma_info.client = prtd->params->client;
- dma_info.direction =
+ req.client = prtd->params->client;
+ config.direction =
(substream->stream == SNDRV_PCM_STREAM_PLAYBACK
? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM);
- dma_info.width = prtd->params->dma_size;
- dma_info.fifo = prtd->params->dma_addr;
+ config.width = prtd->params->dma_size;
+ config.fifo = prtd->params->dma_addr;
prtd->params->ch = prtd->params->ops->request(
- prtd->params->channel, &dma_info);
+ prtd->params->channel, &req);
+ prtd->params->ops->config(prtd->params->ch, &config);
}
snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 90ee77d..89eae93 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -913,7 +913,7 @@
/* do we need to add this widget to the list ? */
if (list) {
int err;
- err = dapm_list_add_widget(list, path->sink);
+ err = dapm_list_add_widget(list, path->source);
if (err < 0) {
dev_err(widget->dapm->dev, "could not add widget %s\n",
widget->name);
@@ -954,7 +954,7 @@
if (stream == SNDRV_PCM_STREAM_PLAYBACK)
paths = is_connected_output_ep(dai->playback_widget, list);
else
- paths = is_connected_input_ep(dai->playback_widget, list);
+ paths = is_connected_input_ep(dai->capture_widget, list);
trace_snd_soc_dapm_connected(paths, stream);
dapm_clear_walk(&card->dapm);
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index bedd171..48fd15b 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -794,6 +794,9 @@
for (i = 0; i < card->num_links; i++) {
be = &card->rtd[i];
+ if (!be->dai_link->no_pcm)
+ continue;
+
if (be->cpu_dai->playback_widget == widget ||
be->codec_dai->playback_widget == widget)
return be;
@@ -803,6 +806,9 @@
for (i = 0; i < card->num_links; i++) {
be = &card->rtd[i];
+ if (!be->dai_link->no_pcm)
+ continue;
+
if (be->cpu_dai->capture_widget == widget ||
be->codec_dai->capture_widget == widget)
return be;
diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig
index c1c8e95..76dc230 100644
--- a/sound/soc/tegra/Kconfig
+++ b/sound/soc/tegra/Kconfig
@@ -58,17 +58,9 @@
Say Y or M here if you want to add support for SoC audio on Tegra
boards using the WM8753 codec, such as Whistler.
-config MACH_HAS_SND_SOC_TEGRA_WM8903
- bool
- help
- Machines that use the SND_SOC_TEGRA_WM8903 driver should select
- this config option, in order to allow the user to enable
- SND_SOC_TEGRA_WM8903.
-
config SND_SOC_TEGRA_WM8903
tristate "SoC Audio support for Tegra boards using a WM8903 codec"
depends on SND_SOC_TEGRA && I2C
- depends on MACH_HAS_SND_SOC_TEGRA_WM8903
select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
select SND_SOC_WM8903
@@ -79,7 +71,7 @@
config SND_SOC_TEGRA_TRIMSLICE
tristate "SoC Audio support for TrimSlice board"
- depends on SND_SOC_TEGRA && MACH_TRIMSLICE && I2C
+ depends on SND_SOC_TEGRA && I2C
select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
select SND_SOC_TLV320AIC23
help
diff --git a/sound/soc/tegra/tegra20_i2s.c b/sound/soc/tegra/tegra20_i2s.c
index 0c7af63..1647dbf 100644
--- a/sound/soc/tegra/tegra20_i2s.c
+++ b/sound/soc/tegra/tegra20_i2s.c
@@ -62,7 +62,7 @@
{
struct tegra20_i2s *i2s = dev_get_drvdata(dev);
- clk_disable(i2s->clk_i2s);
+ clk_disable_unprepare(i2s->clk_i2s);
return 0;
}
@@ -72,7 +72,7 @@
struct tegra20_i2s *i2s = dev_get_drvdata(dev);
int ret;
- ret = clk_enable(i2s->clk_i2s);
+ ret = clk_prepare_enable(i2s->clk_i2s);
if (ret) {
dev_err(dev, "clk_enable failed: %d\n", ret);
return ret;
diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c
index f9b5741..2262e4f 100644
--- a/sound/soc/tegra/tegra20_spdif.c
+++ b/sound/soc/tegra/tegra20_spdif.c
@@ -54,7 +54,7 @@
{
struct tegra20_spdif *spdif = dev_get_drvdata(dev);
- clk_disable(spdif->clk_spdif_out);
+ clk_disable_unprepare(spdif->clk_spdif_out);
return 0;
}
@@ -64,7 +64,7 @@
struct tegra20_spdif *spdif = dev_get_drvdata(dev);
int ret;
- ret = clk_enable(spdif->clk_spdif_out);
+ ret = clk_prepare_enable(spdif->clk_spdif_out);
if (ret) {
dev_err(dev, "clk_enable failed: %d\n", ret);
return ret;
diff --git a/sound/soc/tegra/tegra30_ahub.c b/sound/soc/tegra/tegra30_ahub.c
index 57cd419..bf56101 100644
--- a/sound/soc/tegra/tegra30_ahub.c
+++ b/sound/soc/tegra/tegra30_ahub.c
@@ -56,8 +56,8 @@
regcache_cache_only(ahub->regmap_apbif, true);
regcache_cache_only(ahub->regmap_ahub, true);
- clk_disable(ahub->clk_apbif);
- clk_disable(ahub->clk_d_audio);
+ clk_disable_unprepare(ahub->clk_apbif);
+ clk_disable_unprepare(ahub->clk_d_audio);
return 0;
}
@@ -77,12 +77,12 @@
{
int ret;
- ret = clk_enable(ahub->clk_d_audio);
+ ret = clk_prepare_enable(ahub->clk_d_audio);
if (ret) {
dev_err(dev, "clk_enable d_audio failed: %d\n", ret);
return ret;
}
- ret = clk_enable(ahub->clk_apbif);
+ ret = clk_prepare_enable(ahub->clk_apbif);
if (ret) {
dev_err(dev, "clk_enable apbif failed: %d\n", ret);
clk_disable(ahub->clk_d_audio);
@@ -629,3 +629,4 @@
MODULE_DESCRIPTION("Tegra30 AHUB driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_DEVICE_TABLE(of, tegra30_ahub_of_match);
diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c
index 8596032..d308faa 100644
--- a/sound/soc/tegra/tegra30_i2s.c
+++ b/sound/soc/tegra/tegra30_i2s.c
@@ -62,7 +62,7 @@
regcache_cache_only(i2s->regmap, true);
- clk_disable(i2s->clk_i2s);
+ clk_disable_unprepare(i2s->clk_i2s);
return 0;
}
@@ -72,7 +72,7 @@
struct tegra30_i2s *i2s = dev_get_drvdata(dev);
int ret;
- ret = clk_enable(i2s->clk_i2s);
+ ret = clk_prepare_enable(i2s->clk_i2s);
if (ret) {
dev_err(dev, "clk_enable failed: %d\n", ret);
return ret;
diff --git a/sound/soc/tegra/tegra_asoc_utils.c b/sound/soc/tegra/tegra_asoc_utils.c
index 9515ce5..6872c77 100644
--- a/sound/soc/tegra/tegra_asoc_utils.c
+++ b/sound/soc/tegra/tegra_asoc_utils.c
@@ -69,9 +69,9 @@
data->set_baseclock = 0;
data->set_mclk = 0;
- clk_disable(data->clk_cdev1);
- clk_disable(data->clk_pll_a_out0);
- clk_disable(data->clk_pll_a);
+ clk_disable_unprepare(data->clk_cdev1);
+ clk_disable_unprepare(data->clk_pll_a_out0);
+ clk_disable_unprepare(data->clk_pll_a);
err = clk_set_rate(data->clk_pll_a, new_baseclock);
if (err) {
@@ -87,19 +87,19 @@
/* Don't set cdev1/extern1 rate; it's locked to pll_a_out0 */
- err = clk_enable(data->clk_pll_a);
+ err = clk_prepare_enable(data->clk_pll_a);
if (err) {
dev_err(data->dev, "Can't enable pll_a: %d\n", err);
return err;
}
- err = clk_enable(data->clk_pll_a_out0);
+ err = clk_prepare_enable(data->clk_pll_a_out0);
if (err) {
dev_err(data->dev, "Can't enable pll_a_out0: %d\n", err);
return err;
}
- err = clk_enable(data->clk_cdev1);
+ err = clk_prepare_enable(data->clk_cdev1);
if (err) {
dev_err(data->dev, "Can't enable cdev1: %d\n", err);
return err;
diff --git a/sound/soc/tegra/tegra_wm8903.c b/sound/soc/tegra/tegra_wm8903.c
index 0b0df49..3b6da91 100644
--- a/sound/soc/tegra/tegra_wm8903.c
+++ b/sound/soc/tegra/tegra_wm8903.c
@@ -346,6 +346,17 @@
return 0;
}
+static int tegra_wm8903_remove(struct snd_soc_card *card)
+{
+ struct snd_soc_pcm_runtime *rtd = &(card->rtd[0]);
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ struct snd_soc_codec *codec = codec_dai->codec;
+
+ wm8903_mic_detect(codec, NULL, 0, 0);
+
+ return 0;
+}
+
static struct snd_soc_dai_link tegra_wm8903_dai = {
.name = "WM8903",
.stream_name = "WM8903 PCM",
@@ -363,6 +374,8 @@
.dai_link = &tegra_wm8903_dai,
.num_links = 1,
+ .remove = tegra_wm8903_remove,
+
.controls = tegra_wm8903_controls,
.num_controls = ARRAY_SIZE(tegra_wm8903_controls),
.dapm_widgets = tegra_wm8903_dapm_widgets,
diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c
index 6f9715a..56ad923 100644
--- a/sound/usb/6fire/firmware.c
+++ b/sound/usb/6fire/firmware.c
@@ -209,7 +209,7 @@
int ret;
u8 data;
struct usb_device *device = interface_to_usbdev(intf);
- const struct firmware *fw = 0;
+ const struct firmware *fw = NULL;
struct ihex_record *rec = kmalloc(sizeof(struct ihex_record),
GFP_KERNEL);
diff --git a/sound/usb/card.h b/sound/usb/card.h
index 0d37238..2b9ffff 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -119,6 +119,7 @@
unsigned long unlink_mask; /* bitmask of unlinked urbs */
/* data and sync endpoints for this stream */
+ unsigned int ep_num; /* the endpoint number */
struct snd_usb_endpoint *data_endpoint;
struct snd_usb_endpoint *sync_endpoint;
unsigned long flags;
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index e690690..0f647d2 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -414,7 +414,7 @@
{
struct list_head *p;
struct snd_usb_endpoint *ep;
- int ret, is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK;
+ int is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK;
mutex_lock(&chip->mutex);
@@ -434,16 +434,6 @@
type == SND_USB_ENDPOINT_TYPE_DATA ? "data" : "sync",
ep_num);
- /* select the alt setting once so the endpoints become valid */
- ret = usb_set_interface(chip->dev, alts->desc.bInterfaceNumber,
- alts->desc.bAlternateSetting);
- if (ret < 0) {
- snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n",
- __func__, ret);
- ep = NULL;
- goto __exit_unlock;
- }
-
ep = kzalloc(sizeof(*ep), GFP_KERNEL);
if (!ep)
goto __exit_unlock;
@@ -831,9 +821,6 @@
if (++ep->use_count != 1)
return 0;
- if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags)))
- return -EINVAL;
-
/* just to be sure */
deactivate_urbs(ep, 0, 1);
wait_clear_urbs(ep);
@@ -911,9 +898,6 @@
if (snd_BUG_ON(ep->use_count == 0))
return;
- if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags)))
- return;
-
if (--ep->use_count == 0) {
deactivate_urbs(ep, force, can_sleep);
ep->data_subs = NULL;
@@ -927,42 +911,6 @@
}
/**
- * snd_usb_endpoint_activate: activate an snd_usb_endpoint
- *
- * @ep: the endpoint to activate
- *
- * If the endpoint is not currently in use, this functions will select the
- * correct alternate interface setting for the interface of this endpoint.
- *
- * In case of any active users, this functions does nothing.
- *
- * Returns an error if usb_set_interface() failed, 0 in all other
- * cases.
- */
-int snd_usb_endpoint_activate(struct snd_usb_endpoint *ep)
-{
- if (ep->use_count != 0)
- return 0;
-
- if (!ep->chip->shutdown &&
- !test_and_set_bit(EP_FLAG_ACTIVATED, &ep->flags)) {
- int ret;
-
- ret = usb_set_interface(ep->chip->dev, ep->iface, ep->alt_idx);
- if (ret < 0) {
- snd_printk(KERN_ERR "%s() usb_set_interface() failed, ret = %d\n",
- __func__, ret);
- clear_bit(EP_FLAG_ACTIVATED, &ep->flags);
- return ret;
- }
-
- return 0;
- }
-
- return -EBUSY;
-}
-
-/**
* snd_usb_endpoint_deactivate: deactivate an snd_usb_endpoint
*
* @ep: the endpoint to deactivate
@@ -980,24 +928,15 @@
if (!ep)
return -EINVAL;
+ deactivate_urbs(ep, 1, 1);
+ wait_clear_urbs(ep);
+
if (ep->use_count != 0)
return 0;
- if (!ep->chip->shutdown &&
- test_and_clear_bit(EP_FLAG_ACTIVATED, &ep->flags)) {
- int ret;
+ clear_bit(EP_FLAG_ACTIVATED, &ep->flags);
- ret = usb_set_interface(ep->chip->dev, ep->iface, 0);
- if (ret < 0) {
- snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n",
- __func__, ret);
- return ret;
- }
-
- return 0;
- }
-
- return -EBUSY;
+ return 0;
}
/**
diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c
index 41daaa2..e71fe55 100644
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -341,6 +341,14 @@
.map = audigy2nx_map,
.selector_map = audigy2nx_selectors,
},
+ { /* Logitech, Inc. QuickCam Pro for Notebooks */
+ .id = USB_ID(0x046d, 0x0991),
+ .ignore_ctl_error = 1,
+ },
+ { /* Logitech, Inc. QuickCam E 3500 */
+ .id = USB_ID(0x046d, 0x09a4),
+ .ignore_ctl_error = 1,
+ },
{
/* Hercules DJ Console (Windows Edition) */
.id = USB_ID(0x06f8, 0xb000),
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index cdf8b76..a1298f3 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -261,19 +261,6 @@
force, can_sleep, wait);
}
-static int activate_endpoints(struct snd_usb_substream *subs)
-{
- if (subs->sync_endpoint) {
- int ret;
-
- ret = snd_usb_endpoint_activate(subs->sync_endpoint);
- if (ret < 0)
- return ret;
- }
-
- return snd_usb_endpoint_activate(subs->data_endpoint);
-}
-
static int deactivate_endpoints(struct snd_usb_substream *subs)
{
int reta, retb;
@@ -314,6 +301,33 @@
if (fmt == subs->cur_audiofmt)
return 0;
+ /* close the old interface */
+ if (subs->interface >= 0 && subs->interface != fmt->iface) {
+ err = usb_set_interface(subs->dev, subs->interface, 0);
+ if (err < 0) {
+ snd_printk(KERN_ERR "%d:%d:%d: return to setting 0 failed (%d)\n",
+ dev->devnum, fmt->iface, fmt->altsetting, err);
+ return -EIO;
+ }
+ subs->interface = -1;
+ subs->altset_idx = 0;
+ }
+
+ /* set interface */
+ if (subs->interface != fmt->iface ||
+ subs->altset_idx != fmt->altset_idx) {
+ err = usb_set_interface(dev, fmt->iface, fmt->altsetting);
+ if (err < 0) {
+ snd_printk(KERN_ERR "%d:%d:%d: usb_set_interface failed (%d)\n",
+ dev->devnum, fmt->iface, fmt->altsetting, err);
+ return -EIO;
+ }
+ snd_printdd(KERN_INFO "setting usb interface %d:%d\n",
+ fmt->iface, fmt->altsetting);
+ subs->interface = fmt->iface;
+ subs->altset_idx = fmt->altset_idx;
+ }
+
subs->data_endpoint = snd_usb_add_endpoint(subs->stream->chip,
alts, fmt->endpoint, subs->direction,
SND_USB_ENDPOINT_TYPE_DATA);
@@ -354,17 +368,21 @@
(get_endpoint(alts, 1)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
get_endpoint(alts, 1)->bSynchAddress != 0 &&
!implicit_fb)) {
- snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n",
- dev->devnum, fmt->iface, fmt->altsetting);
+ snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. bmAttributes %02x, bLength %d, bSynchAddress %02x\n",
+ dev->devnum, fmt->iface, fmt->altsetting,
+ get_endpoint(alts, 1)->bmAttributes,
+ get_endpoint(alts, 1)->bLength,
+ get_endpoint(alts, 1)->bSynchAddress);
return -EINVAL;
}
ep = get_endpoint(alts, 1)->bEndpointAddress;
- if (get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
+ if (!implicit_fb &&
+ get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
(( is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress | USB_DIR_IN)) ||
- (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)) ||
- ( is_playback && !implicit_fb))) {
- snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n",
- dev->devnum, fmt->iface, fmt->altsetting);
+ (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)))) {
+ snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. is_playback %d, ep %02x, bSynchAddress %02x\n",
+ dev->devnum, fmt->iface, fmt->altsetting,
+ is_playback, ep, get_endpoint(alts, 0)->bSynchAddress);
return -EINVAL;
}
@@ -383,7 +401,7 @@
subs->data_endpoint->sync_master = subs->sync_endpoint;
}
- if ((err = snd_usb_init_pitch(subs->stream->chip, subs->interface, alts, fmt)) < 0)
+ if ((err = snd_usb_init_pitch(subs->stream->chip, fmt->iface, alts, fmt)) < 0)
return err;
subs->cur_audiofmt = fmt;
@@ -446,7 +464,7 @@
struct usb_interface *iface;
iface = usb_ifnum_to_if(subs->dev, fmt->iface);
alts = &iface->altsetting[fmt->altset_idx];
- ret = snd_usb_init_sample_rate(subs->stream->chip, subs->interface, alts, fmt, rate);
+ ret = snd_usb_init_sample_rate(subs->stream->chip, fmt->iface, alts, fmt, rate);
if (ret < 0)
return ret;
subs->cur_rate = rate;
@@ -456,12 +474,6 @@
mutex_lock(&subs->stream->chip->shutdown_mutex);
/* format changed */
stop_endpoints(subs, 0, 0, 0);
- deactivate_endpoints(subs);
-
- ret = activate_endpoints(subs);
- if (ret < 0)
- goto unlock;
-
ret = snd_usb_endpoint_set_params(subs->data_endpoint, hw_params, fmt,
subs->sync_endpoint);
if (ret < 0)
@@ -496,6 +508,7 @@
subs->period_bytes = 0;
mutex_lock(&subs->stream->chip->shutdown_mutex);
stop_endpoints(subs, 0, 1, 1);
+ deactivate_endpoints(subs);
mutex_unlock(&subs->stream->chip->shutdown_mutex);
return snd_pcm_lib_free_vmalloc_buffer(substream);
}
@@ -934,16 +947,20 @@
static int snd_usb_pcm_close(struct snd_pcm_substream *substream, int direction)
{
- int ret;
struct snd_usb_stream *as = snd_pcm_substream_chip(substream);
struct snd_usb_substream *subs = &as->substream[direction];
stop_endpoints(subs, 0, 0, 0);
- ret = deactivate_endpoints(subs);
+
+ if (!as->chip->shutdown && subs->interface >= 0) {
+ usb_set_interface(subs->dev, subs->interface, 0);
+ subs->interface = -1;
+ }
+
subs->pcm_substream = NULL;
snd_usb_autosuspend(subs->stream->chip);
- return ret;
+ return 0;
}
/* Since a URB can handle only a single linear buffer, we must use double
@@ -1147,7 +1164,8 @@
return -EINVAL;
}
-int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+static int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream,
+ int cmd)
{
int err;
struct snd_usb_substream *subs = substream->runtime->private_data;
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index d89ab4c..79780fa 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -1831,6 +1831,36 @@
}
}
},
+{
+ USB_DEVICE(0x0582, 0x014d),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ /* .vendor_name = "BOSS", */
+ /* .product_name = "GT-100", */
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 3,
+ .type = QUIRK_MIDI_FIXED_ENDPOINT,
+ .data = & (const struct snd_usb_midi_endpoint_info) {
+ .out_cables = 0x0001,
+ .in_cables = 0x0001
+ }
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
/* Guillemot devices */
{
diff --git a/sound/usb/stream.c b/sound/usb/stream.c
index 6b7d7a2..083ed81 100644
--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -97,6 +97,7 @@
subs->formats |= fp->formats;
subs->num_formats++;
subs->fmt_type = fp->fmt_type;
+ subs->ep_num = fp->endpoint;
}
/*
@@ -119,9 +120,7 @@
if (as->fmt_type != fp->fmt_type)
continue;
subs = &as->substream[stream];
- if (!subs->data_endpoint)
- continue;
- if (subs->data_endpoint->ep_num == fp->endpoint) {
+ if (subs->ep_num == fp->endpoint) {
list_add_tail(&fp->list, &subs->fmt_list);
subs->num_formats++;
subs->formats |= fp->formats;
@@ -134,7 +133,7 @@
if (as->fmt_type != fp->fmt_type)
continue;
subs = &as->substream[stream];
- if (subs->data_endpoint)
+ if (subs->ep_num)
continue;
err = snd_pcm_new_stream(as->pcm, stream, 1);
if (err < 0)
diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index 146fd61..d9834b3 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -701,14 +701,18 @@
pfd.fd = fd;
while (1) {
+ struct sockaddr *addr_p = (struct sockaddr *) &addr;
+ socklen_t addr_l = sizeof(addr);
pfd.events = POLLIN;
pfd.revents = 0;
poll(&pfd, 1, -1);
- len = recv(fd, kvp_recv_buffer, sizeof(kvp_recv_buffer), 0);
+ len = recvfrom(fd, kvp_recv_buffer, sizeof(kvp_recv_buffer), 0,
+ addr_p, &addr_l);
- if (len < 0) {
- syslog(LOG_ERR, "recv failed; error:%d", len);
+ if (len < 0 || addr.nl_pid) {
+ syslog(LOG_ERR, "recvfrom failed; pid:%u error:%d %s",
+ addr.nl_pid, errno, strerror(errno));
close(fd);
return -1;
}
diff --git a/tools/lib/traceevent/Makefile b/tools/lib/traceevent/Makefile
index 3d69aa9..46c2f6b 100644
--- a/tools/lib/traceevent/Makefile
+++ b/tools/lib/traceevent/Makefile
@@ -250,8 +250,12 @@
all_objs := $(sort $(ALL_OBJS))
all_deps := $(all_objs:%.o=.%.d)
+# let .d file also depends on the source and header files
define check_deps
- $(CC) -M $(CFLAGS) $< > $@;
+ @set -e; $(RM) $@; \
+ $(CC) -M $(CFLAGS) $< > $@.$$$$; \
+ sed 's,\($*\)\.o[ :]*,\1.o $@ : ,g' < $@.$$$$ > $@; \
+ $(RM) $@.$$$$
endef
$(gui_deps): ks_version.h
@@ -270,11 +274,13 @@
tags: force
$(RM) tags
- find . -name '*.[ch]' | xargs ctags --extra=+f --c-kinds=+px
+ find . -name '*.[ch]' | xargs ctags --extra=+f --c-kinds=+px \
+ --regex-c++='/_PE\(([^,)]*).*/PEVENT_ERRNO__\1/'
TAGS: force
$(RM) TAGS
- find . -name '*.[ch]' | xargs etags
+ find . -name '*.[ch]' | xargs etags \
+ --regex='/_PE(\([^,)]*\).*/PEVENT_ERRNO__\1/'
define do_install
$(print_install) \
@@ -290,7 +296,7 @@
install: install_lib
clean:
- $(RM) *.o *~ $(TARGETS) *.a *.so $(VERSION_FILES).*.d
+ $(RM) *.o *~ $(TARGETS) *.a *.so $(VERSION_FILES) .*.d
$(RM) tags TAGS
endif # skip-makefile
diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index 5548282..5f34aa3 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -467,8 +467,10 @@
item->mod = NULL;
item->addr = addr;
- pevent->funclist = item;
+ if (!item->func || (mod && !item->mod))
+ die("malloc func");
+ pevent->funclist = item;
pevent->func_count++;
return 0;
@@ -511,12 +513,12 @@
static int printk_cmp(const void *a, const void *b)
{
- const struct func_map *fa = a;
- const struct func_map *fb = b;
+ const struct printk_map *pa = a;
+ const struct printk_map *pb = b;
- if (fa->addr < fb->addr)
+ if (pa->addr < pb->addr)
return -1;
- if (fa->addr > fb->addr)
+ if (pa->addr > pb->addr)
return 1;
return 0;
@@ -583,10 +585,13 @@
item = malloc_or_die(sizeof(*item));
item->next = pevent->printklist;
- pevent->printklist = item;
item->printk = strdup(fmt);
item->addr = addr;
+ if (!item->printk)
+ die("malloc fmt");
+
+ pevent->printklist = item;
pevent->printk_count++;
return 0;
@@ -616,7 +621,9 @@
{
struct event_format *event;
- event = malloc_or_die(sizeof(*event));
+ event = malloc(sizeof(*event));
+ if (!event)
+ return NULL;
memset(event, 0, sizeof(*event));
return event;
@@ -626,12 +633,8 @@
{
int i;
- if (!pevent->events)
- pevent->events = malloc_or_die(sizeof(event));
- else
- pevent->events =
- realloc(pevent->events, sizeof(event) *
- (pevent->nr_events + 1));
+ pevent->events = realloc(pevent->events, sizeof(event) *
+ (pevent->nr_events + 1));
if (!pevent->events)
die("Can not allocate events");
@@ -697,6 +700,10 @@
free_arg(arg->symbol.field);
free_flag_sym(arg->symbol.symbols);
break;
+ case PRINT_HEX:
+ free_arg(arg->hex.field);
+ free_arg(arg->hex.size);
+ break;
case PRINT_TYPE:
free(arg->typecast.type);
free_arg(arg->typecast.item);
@@ -775,6 +782,25 @@
return __peek_char();
}
+static int extend_token(char **tok, char *buf, int size)
+{
+ char *newtok = realloc(*tok, size);
+
+ if (!newtok) {
+ free(*tok);
+ *tok = NULL;
+ return -1;
+ }
+
+ if (!*tok)
+ strcpy(newtok, buf);
+ else
+ strcat(newtok, buf);
+ *tok = newtok;
+
+ return 0;
+}
+
static enum event_type force_token(const char *str, char **tok);
static enum event_type __read_token(char **tok)
@@ -859,17 +885,10 @@
do {
if (i == (BUFSIZ - 1)) {
buf[i] = 0;
- if (*tok) {
- *tok = realloc(*tok, tok_size + BUFSIZ);
- if (!*tok)
- return EVENT_NONE;
- strcat(*tok, buf);
- } else
- *tok = strdup(buf);
-
- if (!*tok)
- return EVENT_NONE;
tok_size += BUFSIZ;
+
+ if (extend_token(tok, buf, tok_size) < 0)
+ return EVENT_NONE;
i = 0;
}
last_ch = ch;
@@ -908,17 +927,10 @@
while (get_type(__peek_char()) == type) {
if (i == (BUFSIZ - 1)) {
buf[i] = 0;
- if (*tok) {
- *tok = realloc(*tok, tok_size + BUFSIZ);
- if (!*tok)
- return EVENT_NONE;
- strcat(*tok, buf);
- } else
- *tok = strdup(buf);
-
- if (!*tok)
- return EVENT_NONE;
tok_size += BUFSIZ;
+
+ if (extend_token(tok, buf, tok_size) < 0)
+ return EVENT_NONE;
i = 0;
}
ch = __read_char();
@@ -927,14 +939,7 @@
out:
buf[i] = 0;
- if (*tok) {
- *tok = realloc(*tok, tok_size + i);
- if (!*tok)
- return EVENT_NONE;
- strcat(*tok, buf);
- } else
- *tok = strdup(buf);
- if (!*tok)
+ if (extend_token(tok, buf, tok_size + i + 1) < 0)
return EVENT_NONE;
if (type == EVENT_ITEM) {
@@ -1255,9 +1260,15 @@
field->flags |= FIELD_IS_POINTER;
if (field->type) {
- field->type = realloc(field->type,
- strlen(field->type) +
- strlen(last_token) + 2);
+ char *new_type;
+ new_type = realloc(field->type,
+ strlen(field->type) +
+ strlen(last_token) + 2);
+ if (!new_type) {
+ free(last_token);
+ goto fail;
+ }
+ field->type = new_type;
strcat(field->type, " ");
strcat(field->type, last_token);
free(last_token);
@@ -1282,6 +1293,7 @@
if (strcmp(token, "[") == 0) {
enum event_type last_type = type;
char *brackets = token;
+ char *new_brackets;
int len;
field->flags |= FIELD_IS_ARRAY;
@@ -1301,9 +1313,14 @@
len = 1;
last_type = type;
- brackets = realloc(brackets,
- strlen(brackets) +
- strlen(token) + len);
+ new_brackets = realloc(brackets,
+ strlen(brackets) +
+ strlen(token) + len);
+ if (!new_brackets) {
+ free(brackets);
+ goto fail;
+ }
+ brackets = new_brackets;
if (len == 2)
strcat(brackets, " ");
strcat(brackets, token);
@@ -1319,7 +1336,12 @@
free_token(token);
- brackets = realloc(brackets, strlen(brackets) + 2);
+ new_brackets = realloc(brackets, strlen(brackets) + 2);
+ if (!new_brackets) {
+ free(brackets);
+ goto fail;
+ }
+ brackets = new_brackets;
strcat(brackets, "]");
/* add brackets to type */
@@ -1330,10 +1352,16 @@
* the format: type [] item;
*/
if (type == EVENT_ITEM) {
- field->type = realloc(field->type,
- strlen(field->type) +
- strlen(field->name) +
- strlen(brackets) + 2);
+ char *new_type;
+ new_type = realloc(field->type,
+ strlen(field->type) +
+ strlen(field->name) +
+ strlen(brackets) + 2);
+ if (!new_type) {
+ free(brackets);
+ goto fail;
+ }
+ field->type = new_type;
strcat(field->type, " ");
strcat(field->type, field->name);
free_token(field->name);
@@ -1341,9 +1369,15 @@
field->name = token;
type = read_token(&token);
} else {
- field->type = realloc(field->type,
- strlen(field->type) +
- strlen(brackets) + 1);
+ char *new_type;
+ new_type = realloc(field->type,
+ strlen(field->type) +
+ strlen(brackets) + 1);
+ if (!new_type) {
+ free(brackets);
+ goto fail;
+ }
+ field->type = new_type;
strcat(field->type, brackets);
}
free(brackets);
@@ -1726,10 +1760,16 @@
/* could just be a type pointer */
if ((strcmp(arg->op.op, "*") == 0) &&
type == EVENT_DELIM && (strcmp(token, ")") == 0)) {
+ char *new_atom;
+
if (left->type != PRINT_ATOM)
die("bad pointer type");
- left->atom.atom = realloc(left->atom.atom,
+ new_atom = realloc(left->atom.atom,
strlen(left->atom.atom) + 3);
+ if (!new_atom)
+ goto out_free;
+
+ left->atom.atom = new_atom;
strcat(left->atom.atom, " *");
free(arg->op.op);
*arg = *left;
@@ -2146,6 +2186,8 @@
if (value == NULL)
goto out_free;
field->value = strdup(value);
+ if (field->value == NULL)
+ goto out_free;
free_arg(arg);
arg = alloc_arg();
@@ -2159,6 +2201,8 @@
if (value == NULL)
goto out_free;
field->str = strdup(value);
+ if (field->str == NULL)
+ goto out_free;
free_arg(arg);
arg = NULL;
@@ -2260,6 +2304,45 @@
}
static enum event_type
+process_hex(struct event_format *event, struct print_arg *arg, char **tok)
+{
+ struct print_arg *field;
+ enum event_type type;
+ char *token;
+
+ memset(arg, 0, sizeof(*arg));
+ arg->type = PRINT_HEX;
+
+ field = alloc_arg();
+ type = process_arg(event, field, &token);
+
+ if (test_type_token(type, token, EVENT_DELIM, ","))
+ goto out_free;
+
+ arg->hex.field = field;
+
+ free_token(token);
+
+ field = alloc_arg();
+ type = process_arg(event, field, &token);
+
+ if (test_type_token(type, token, EVENT_DELIM, ")"))
+ goto out_free;
+
+ arg->hex.size = field;
+
+ free_token(token);
+ type = read_token_item(tok);
+ return type;
+
+ out_free:
+ free_arg(field);
+ free_token(token);
+ *tok = NULL;
+ return EVENT_ERROR;
+}
+
+static enum event_type
process_dynamic_array(struct event_format *event, struct print_arg *arg, char **tok)
{
struct format_field *field;
@@ -2488,6 +2571,10 @@
is_symbolic_field = 1;
return process_symbols(event, arg, tok);
}
+ if (strcmp(token, "__print_hex") == 0) {
+ free_token(token);
+ return process_hex(event, arg, tok);
+ }
if (strcmp(token, "__get_str") == 0) {
free_token(token);
return process_str(event, arg, tok);
@@ -2541,7 +2628,16 @@
}
/* atoms can be more than one token long */
while (type == EVENT_ITEM) {
- atom = realloc(atom, strlen(atom) + strlen(token) + 2);
+ char *new_atom;
+ new_atom = realloc(atom,
+ strlen(atom) + strlen(token) + 2);
+ if (!new_atom) {
+ free(atom);
+ *tok = NULL;
+ free_token(token);
+ return EVENT_ERROR;
+ }
+ atom = new_atom;
strcat(atom, " ");
strcat(atom, token);
free_token(token);
@@ -2835,7 +2931,7 @@
event = pevent->events[0];
field = pevent_find_common_field(event, type);
if (!field)
- die("field '%s' not found", type);
+ return -1;
*offset = field->offset;
*size = field->size;
@@ -2886,15 +2982,16 @@
static int parse_common_lock_depth(struct pevent *pevent, void *data)
{
- int ret;
+ return __parse_common(pevent, data,
+ &pevent->ld_size, &pevent->ld_offset,
+ "common_lock_depth");
+}
- ret = __parse_common(pevent, data,
- &pevent->ld_size, &pevent->ld_offset,
- "common_lock_depth");
- if (ret < 0)
- return -1;
-
- return ret;
+static int parse_common_migrate_disable(struct pevent *pevent, void *data)
+{
+ return __parse_common(pevent, data,
+ &pevent->ld_size, &pevent->ld_offset,
+ "common_migrate_disable");
}
static int events_id_cmp(const void *a, const void *b);
@@ -2995,6 +3092,7 @@
break;
case PRINT_FLAGS:
case PRINT_SYMBOL:
+ case PRINT_HEX:
break;
case PRINT_TYPE:
val = eval_num_arg(data, size, event, arg->typecast.item);
@@ -3214,11 +3312,13 @@
{
struct pevent *pevent = event->pevent;
struct print_flag_sym *flag;
+ struct format_field *field;
unsigned long long val, fval;
unsigned long addr;
char *str;
+ unsigned char *hex;
int print;
- int len;
+ int i, len;
switch (arg->type) {
case PRINT_NULL:
@@ -3228,27 +3328,29 @@
print_str_to_seq(s, format, len_arg, arg->atom.atom);
return;
case PRINT_FIELD:
- if (!arg->field.field) {
- arg->field.field = pevent_find_any_field(event, arg->field.name);
- if (!arg->field.field)
+ field = arg->field.field;
+ if (!field) {
+ field = pevent_find_any_field(event, arg->field.name);
+ if (!field)
die("field %s not found", arg->field.name);
+ arg->field.field = field;
}
/* Zero sized fields, mean the rest of the data */
- len = arg->field.field->size ? : size - arg->field.field->offset;
+ len = field->size ? : size - field->offset;
/*
* Some events pass in pointers. If this is not an array
* and the size is the same as long_size, assume that it
* is a pointer.
*/
- if (!(arg->field.field->flags & FIELD_IS_ARRAY) &&
- arg->field.field->size == pevent->long_size) {
- addr = *(unsigned long *)(data + arg->field.field->offset);
+ if (!(field->flags & FIELD_IS_ARRAY) &&
+ field->size == pevent->long_size) {
+ addr = *(unsigned long *)(data + field->offset);
trace_seq_printf(s, "%lx", addr);
break;
}
str = malloc_or_die(len + 1);
- memcpy(str, data + arg->field.field->offset, len);
+ memcpy(str, data + field->offset, len);
str[len] = 0;
print_str_to_seq(s, format, len_arg, str);
free(str);
@@ -3281,6 +3383,23 @@
}
}
break;
+ case PRINT_HEX:
+ field = arg->hex.field->field.field;
+ if (!field) {
+ str = arg->hex.field->field.name;
+ field = pevent_find_any_field(event, str);
+ if (!field)
+ die("field %s not found", str);
+ arg->hex.field->field.field = field;
+ }
+ hex = data + field->offset;
+ len = eval_num_arg(data, size, event, arg->hex.size);
+ for (i = 0; i < len; i++) {
+ if (i)
+ trace_seq_putc(s, ' ');
+ trace_seq_printf(s, "%02x", hex[i]);
+ }
+ break;
case PRINT_TYPE:
break;
@@ -3299,7 +3418,7 @@
break;
}
case PRINT_BSTRING:
- trace_seq_printf(s, format, arg->string.string);
+ print_str_to_seq(s, format, len_arg, arg->string.string);
break;
case PRINT_OP:
/*
@@ -3363,6 +3482,10 @@
string = malloc_or_die(sizeof(*string));
string->next = strings;
string->str = strdup(str.buffer);
+ if (!string->str)
+ die("malloc str");
+
+ args[i] = (unsigned long long)string->str;
strings = string;
trace_seq_destroy(&str);
break;
@@ -3400,6 +3523,7 @@
unsigned long long ip, val;
char *ptr;
void *bptr;
+ int vsize;
field = pevent->bprint_buf_field;
ip_field = pevent->bprint_ip_field;
@@ -3448,6 +3572,8 @@
goto process_again;
case '0' ... '9':
goto process_again;
+ case '.':
+ goto process_again;
case 'p':
ls = 1;
/* fall through */
@@ -3455,23 +3581,30 @@
case 'u':
case 'x':
case 'i':
+ switch (ls) {
+ case 0:
+ vsize = 4;
+ break;
+ case 1:
+ vsize = pevent->long_size;
+ break;
+ case 2:
+ vsize = 8;
+ break;
+ default:
+ vsize = ls; /* ? */
+ break;
+ }
+ /* fall through */
+ case '*':
+ if (*ptr == '*')
+ vsize = 4;
+
/* the pointers are always 4 bytes aligned */
bptr = (void *)(((unsigned long)bptr + 3) &
~3);
- switch (ls) {
- case 0:
- ls = 4;
- break;
- case 1:
- ls = pevent->long_size;
- break;
- case 2:
- ls = 8;
- default:
- break;
- }
- val = pevent_read_number(pevent, bptr, ls);
- bptr += ls;
+ val = pevent_read_number(pevent, bptr, vsize);
+ bptr += vsize;
arg = alloc_arg();
arg->next = NULL;
arg->type = PRINT_ATOM;
@@ -3479,12 +3612,21 @@
sprintf(arg->atom.atom, "%lld", val);
*next = arg;
next = &arg->next;
+ /*
+ * The '*' case means that an arg is used as the length.
+ * We need to continue to figure out for what.
+ */
+ if (*ptr == '*')
+ goto process_again;
+
break;
case 's':
arg = alloc_arg();
arg->next = NULL;
arg->type = PRINT_BSTRING;
arg->string.string = strdup(bptr);
+ if (!arg->string.string)
+ break;
bptr += strlen(bptr) + 1;
*next = arg;
next = &arg->next;
@@ -3589,6 +3731,16 @@
trace_seq_printf(s, fmt, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
}
+static int is_printable_array(char *p, unsigned int len)
+{
+ unsigned int i;
+
+ for (i = 0; i < len && p[i]; i++)
+ if (!isprint(p[i]))
+ return 0;
+ return 1;
+}
+
static void print_event_fields(struct trace_seq *s, void *data, int size,
struct event_format *event)
{
@@ -3608,7 +3760,8 @@
len = offset >> 16;
offset &= 0xffff;
}
- if (field->flags & FIELD_IS_STRING) {
+ if (field->flags & FIELD_IS_STRING &&
+ is_printable_array(data + offset, len)) {
trace_seq_printf(s, "%s", (char *)data + offset);
} else {
trace_seq_puts(s, "ARRAY[");
@@ -3619,6 +3772,7 @@
*((unsigned char *)data + offset + i));
}
trace_seq_putc(s, ']');
+ field->flags &= ~FIELD_IS_STRING;
}
} else {
val = pevent_read_number(event->pevent, data + field->offset,
@@ -3758,6 +3912,7 @@
} else if (*(ptr+1) == 'M' || *(ptr+1) == 'm') {
print_mac_arg(s, *(ptr+1), data, size, event, arg);
ptr++;
+ arg = arg->next;
break;
}
@@ -3794,14 +3949,15 @@
break;
}
}
- if (pevent->long_size == 8 && ls) {
+ if (pevent->long_size == 8 && ls &&
+ sizeof(long) != 8) {
char *p;
ls = 2;
/* make %l into %ll */
p = strchr(format, 'l');
if (p)
- memmove(p, p+1, strlen(p)+1);
+ memmove(p+1, p, strlen(p)+1);
else if (strcmp(format, "%p") == 0)
strcpy(format, "0x%llx");
}
@@ -3878,8 +4034,7 @@
* pevent_data_lat_fmt - parse the data for the latency format
* @pevent: a handle to the pevent
* @s: the trace_seq to write to
- * @data: the raw data to read from
- * @size: currently unused.
+ * @record: the record to read from
*
* This parses out the Latency format (interrupts disabled,
* need rescheduling, in hard/soft interrupt, preempt count
@@ -3889,10 +4044,13 @@
struct trace_seq *s, struct pevent_record *record)
{
static int check_lock_depth = 1;
+ static int check_migrate_disable = 1;
static int lock_depth_exists;
+ static int migrate_disable_exists;
unsigned int lat_flags;
unsigned int pc;
int lock_depth;
+ int migrate_disable;
int hardirq;
int softirq;
void *data = record->data;
@@ -3900,18 +4058,26 @@
lat_flags = parse_common_flags(pevent, data);
pc = parse_common_pc(pevent, data);
/* lock_depth may not always exist */
- if (check_lock_depth) {
- struct format_field *field;
- struct event_format *event;
-
- check_lock_depth = 0;
- event = pevent->events[0];
- field = pevent_find_common_field(event, "common_lock_depth");
- if (field)
- lock_depth_exists = 1;
- }
if (lock_depth_exists)
lock_depth = parse_common_lock_depth(pevent, data);
+ else if (check_lock_depth) {
+ lock_depth = parse_common_lock_depth(pevent, data);
+ if (lock_depth < 0)
+ check_lock_depth = 0;
+ else
+ lock_depth_exists = 1;
+ }
+
+ /* migrate_disable may not always exist */
+ if (migrate_disable_exists)
+ migrate_disable = parse_common_migrate_disable(pevent, data);
+ else if (check_migrate_disable) {
+ migrate_disable = parse_common_migrate_disable(pevent, data);
+ if (migrate_disable < 0)
+ check_migrate_disable = 0;
+ else
+ migrate_disable_exists = 1;
+ }
hardirq = lat_flags & TRACE_FLAG_HARDIRQ;
softirq = lat_flags & TRACE_FLAG_SOFTIRQ;
@@ -3930,6 +4096,13 @@
else
trace_seq_putc(s, '.');
+ if (migrate_disable_exists) {
+ if (migrate_disable < 0)
+ trace_seq_putc(s, '.');
+ else
+ trace_seq_printf(s, "%d", migrate_disable);
+ }
+
if (lock_depth_exists) {
if (lock_depth < 0)
trace_seq_putc(s, '.');
@@ -3996,10 +4169,7 @@
* pevent_data_comm_from_pid - parse the data into the print format
* @s: the trace_seq to write to
* @event: the handle to the event
- * @cpu: the cpu the event was recorded on
- * @data: the raw data
- * @size: the size of the raw data
- * @nsecs: the timestamp of the event
+ * @record: the record to read from
*
* This parses the raw @data using the given @event information and
* writes the print format into the trace_seq.
@@ -4279,6 +4449,13 @@
trace_seq_destroy(&s);
printf(")");
break;
+ case PRINT_HEX:
+ printf("__print_hex(");
+ print_args(args->hex.field);
+ printf(", ");
+ print_args(args->hex.size);
+ printf(")");
+ break;
case PRINT_STRING:
case PRINT_BSTRING:
printf("__get_str(%s)", args->string.string);
@@ -4541,6 +4718,8 @@
die("failed to read event id");
event->system = strdup(sys);
+ if (!event->system)
+ die("failed to allocate system");
/* Add pevent to event so that it can be referenced */
event->pevent = pevent;
@@ -4582,6 +4761,11 @@
list = &arg->next;
arg->type = PRINT_FIELD;
arg->field.name = strdup(field->name);
+ if (!arg->field.name) {
+ do_warning("failed to allocate field name");
+ event->flags |= EVENT_FL_FAILED;
+ return -1;
+ }
arg->field.field = field;
}
return 0;
@@ -4753,7 +4937,7 @@
* @record: The record with the field name.
* @err: print default error if failed.
*
- * Returns: 0 on success, -1 field not fould, or 1 if buffer is full.
+ * Returns: 0 on success, -1 field not found, or 1 if buffer is full.
*/
int pevent_print_num_field(struct trace_seq *s, const char *fmt,
struct event_format *event, const char *name,
@@ -4795,11 +4979,12 @@
* pevent_register_print_function - register a helper function
* @pevent: the handle to the pevent
* @func: the function to process the helper function
+ * @ret_type: the return type of the helper function
* @name: the name of the helper function
* @parameters: A list of enum pevent_func_arg_type
*
* Some events may have helper functions in the print format arguments.
- * This allows a plugin to dynmically create a way to process one
+ * This allows a plugin to dynamically create a way to process one
* of these functions.
*
* The @parameters is a variable list of pevent_func_arg_type enums that
@@ -4870,12 +5055,13 @@
}
/**
- * pevent_register_event_handle - register a way to parse an event
+ * pevent_register_event_handler - register a way to parse an event
* @pevent: the handle to the pevent
* @id: the id of the event to register
* @sys_name: the system name the event belongs to
* @event_name: the name of the event
* @func: the function to call to parse the event information
+ * @context: the data to be passed to @func
*
* This function allows a developer to override the parsing of
* a given event. If for some reason the default print format
@@ -4925,6 +5111,11 @@
if (sys_name)
handle->sys_name = strdup(sys_name);
+ if ((event_name && !handle->event_name) ||
+ (sys_name && !handle->sys_name)) {
+ die("Failed to allocate event/sys name");
+ }
+
handle->func = func;
handle->next = pevent->handlers;
pevent->handlers = handle;
diff --git a/tools/lib/traceevent/event-parse.h b/tools/lib/traceevent/event-parse.h
index ac997bc..5772ad8 100644
--- a/tools/lib/traceevent/event-parse.h
+++ b/tools/lib/traceevent/event-parse.h
@@ -226,6 +226,11 @@
struct print_flag_sym *symbols;
};
+struct print_arg_hex {
+ struct print_arg *field;
+ struct print_arg *size;
+};
+
struct print_arg_dynarray {
struct format_field *field;
struct print_arg *index;
@@ -253,6 +258,7 @@
PRINT_FIELD,
PRINT_FLAGS,
PRINT_SYMBOL,
+ PRINT_HEX,
PRINT_TYPE,
PRINT_STRING,
PRINT_BSTRING,
@@ -270,6 +276,7 @@
struct print_arg_typecast typecast;
struct print_arg_flags flags;
struct print_arg_symbol symbol;
+ struct print_arg_hex hex;
struct print_arg_func func;
struct print_arg_string string;
struct print_arg_op op;
diff --git a/tools/lib/traceevent/parse-filter.c b/tools/lib/traceevent/parse-filter.c
index dfcfe2c1..ad17855 100644
--- a/tools/lib/traceevent/parse-filter.c
+++ b/tools/lib/traceevent/parse-filter.c
@@ -96,7 +96,7 @@
(strcmp(token, "=") == 0 || strcmp(token, "!") == 0) &&
pevent_peek_char() == '~') {
/* append it */
- *tok = malloc(3);
+ *tok = malloc_or_die(3);
sprintf(*tok, "%c%c", *token, '~');
free_token(token);
/* Now remove the '~' from the buffer */
@@ -148,17 +148,11 @@
if (filter_type)
return filter_type;
- if (!filter->filters)
- filter->event_filters =
- malloc_or_die(sizeof(*filter->event_filters));
- else {
- filter->event_filters =
- realloc(filter->event_filters,
- sizeof(*filter->event_filters) *
- (filter->filters + 1));
- if (!filter->event_filters)
- die("Could not allocate filter");
- }
+ filter->event_filters = realloc(filter->event_filters,
+ sizeof(*filter->event_filters) *
+ (filter->filters + 1));
+ if (!filter->event_filters)
+ die("Could not allocate filter");
for (i = 0; i < filter->filters; i++) {
if (filter->event_filters[i].event_id > id)
@@ -1480,7 +1474,7 @@
{
struct filter_type *filter_type;
int count = 0;
- int *ids;
+ int *ids = NULL;
int i;
if (!filter->filters)
@@ -1504,10 +1498,8 @@
default:
break;
}
- if (count)
- ids = realloc(ids, sizeof(*ids) * (count + 1));
- else
- ids = malloc(sizeof(*ids));
+
+ ids = realloc(ids, sizeof(*ids) * (count + 1));
if (!ids)
die("Can't allocate ids");
ids[count++] = filter_type->event_id;
@@ -1710,18 +1702,43 @@
static const char *get_field_str(struct filter_arg *arg, struct pevent_record *record)
{
- const char *val = record->data + arg->str.field->offset;
+ struct event_format *event;
+ struct pevent *pevent;
+ unsigned long long addr;
+ const char *val = NULL;
+ char hex[64];
- /*
- * We need to copy the data since we can't be sure the field
- * is null terminated.
- */
- if (*(val + arg->str.field->size - 1)) {
- /* copy it */
- memcpy(arg->str.buffer, val, arg->str.field->size);
- /* the buffer is already NULL terminated */
- val = arg->str.buffer;
+ /* If the field is not a string convert it */
+ if (arg->str.field->flags & FIELD_IS_STRING) {
+ val = record->data + arg->str.field->offset;
+
+ /*
+ * We need to copy the data since we can't be sure the field
+ * is null terminated.
+ */
+ if (*(val + arg->str.field->size - 1)) {
+ /* copy it */
+ memcpy(arg->str.buffer, val, arg->str.field->size);
+ /* the buffer is already NULL terminated */
+ val = arg->str.buffer;
+ }
+
+ } else {
+ event = arg->str.field->event;
+ pevent = event->pevent;
+ addr = get_value(event, arg->str.field, record);
+
+ if (arg->str.field->flags & (FIELD_IS_POINTER | FIELD_IS_LONG))
+ /* convert to a kernel symbol */
+ val = pevent_find_function(pevent, addr);
+
+ if (val == NULL) {
+ /* just use the hex of the string name */
+ snprintf(hex, 64, "0x%llx", addr);
+ val = hex;
+ }
}
+
return val;
}
@@ -2001,11 +2018,13 @@
char *lstr;
char *rstr;
char *op;
- char *str;
+ char *str = NULL;
int len;
lstr = arg_to_str(filter, arg->exp.left);
rstr = arg_to_str(filter, arg->exp.right);
+ if (!lstr || !rstr)
+ goto out;
switch (arg->exp.type) {
case FILTER_EXP_ADD:
@@ -2045,6 +2064,7 @@
len = strlen(op) + strlen(lstr) + strlen(rstr) + 4;
str = malloc_or_die(len);
snprintf(str, len, "%s %s %s", lstr, op, rstr);
+out:
free(lstr);
free(rstr);
@@ -2061,6 +2081,8 @@
lstr = arg_to_str(filter, arg->num.left);
rstr = arg_to_str(filter, arg->num.right);
+ if (!lstr || !rstr)
+ goto out;
switch (arg->num.type) {
case FILTER_CMP_EQ:
@@ -2097,6 +2119,7 @@
break;
}
+out:
free(lstr);
free(rstr);
return str;
@@ -2247,7 +2270,12 @@
/* The best way to compare complex filters is with strings */
str1 = arg_to_str(filter1, filter_type1->filter);
str2 = arg_to_str(filter2, filter_type2->filter);
- result = strcmp(str1, str2) != 0;
+ if (str1 && str2)
+ result = strcmp(str1, str2) != 0;
+ else
+ /* bail out if allocation fails */
+ result = 1;
+
free(str1);
free(str2);
if (result)
diff --git a/tools/perf/Documentation/perf-bench.txt b/tools/perf/Documentation/perf-bench.txt
index a3dbadb..7065cd6 100644
--- a/tools/perf/Documentation/perf-bench.txt
+++ b/tools/perf/Documentation/perf-bench.txt
@@ -12,7 +12,7 @@
DESCRIPTION
-----------
-This 'perf bench' command is general framework for benchmark suites.
+This 'perf bench' command is a general framework for benchmark suites.
COMMON OPTIONS
--------------
@@ -45,14 +45,20 @@
'sched'::
Scheduler and IPC mechanisms.
+'mem'::
+ Memory access performance.
+
+'all'::
+ All benchmark subsystems.
+
SUITES FOR 'sched'
~~~~~~~~~~~~~~~~~~
*messaging*::
Suite for evaluating performance of scheduler and IPC mechanisms.
Based on hackbench by Rusty Russell.
-Options of *pipe*
-^^^^^^^^^^^^^^^^^
+Options of *messaging*
+^^^^^^^^^^^^^^^^^^^^^^
-p::
--pipe::
Use pipe() instead of socketpair()
@@ -115,6 +121,72 @@
59004 ops/sec
---------------------
+SUITES FOR 'mem'
+~~~~~~~~~~~~~~~~
+*memcpy*::
+Suite for evaluating performance of simple memory copy in various ways.
+
+Options of *memcpy*
+^^^^^^^^^^^^^^^^^^^
+-l::
+--length::
+Specify length of memory to copy (default: 1MB).
+Available units are B, KB, MB, GB and TB (case insensitive).
+
+-r::
+--routine::
+Specify routine to copy (default: default).
+Available routines are depend on the architecture.
+On x86-64, x86-64-unrolled, x86-64-movsq and x86-64-movsb are supported.
+
+-i::
+--iterations::
+Repeat memcpy invocation this number of times.
+
+-c::
+--cycle::
+Use perf's cpu-cycles event instead of gettimeofday syscall.
+
+-o::
+--only-prefault::
+Show only the result with page faults before memcpy.
+
+-n::
+--no-prefault::
+Show only the result without page faults before memcpy.
+
+*memset*::
+Suite for evaluating performance of simple memory set in various ways.
+
+Options of *memset*
+^^^^^^^^^^^^^^^^^^^
+-l::
+--length::
+Specify length of memory to set (default: 1MB).
+Available units are B, KB, MB, GB and TB (case insensitive).
+
+-r::
+--routine::
+Specify routine to set (default: default).
+Available routines are depend on the architecture.
+On x86-64, x86-64-unrolled, x86-64-stosq and x86-64-stosb are supported.
+
+-i::
+--iterations::
+Repeat memset invocation this number of times.
+
+-c::
+--cycle::
+Use perf's cpu-cycles event instead of gettimeofday syscall.
+
+-o::
+--only-prefault::
+Show only the result with page faults before memset.
+
+-n::
+--no-prefault::
+Show only the result without page faults before memset.
+
SEE ALSO
--------
linkperf:perf[1]
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
index 2d89f02..495210a 100644
--- a/tools/perf/Documentation/perf-report.txt
+++ b/tools/perf/Documentation/perf-report.txt
@@ -57,7 +57,7 @@
-s::
--sort=::
- Sort by key(s): pid, comm, dso, symbol, parent.
+ Sort by key(s): pid, comm, dso, symbol, parent, srcline.
-p::
--parent=<regex>::
diff --git a/tools/perf/Documentation/perf-top.txt b/tools/perf/Documentation/perf-top.txt
index 4a5680c..5b80d84 100644
--- a/tools/perf/Documentation/perf-top.txt
+++ b/tools/perf/Documentation/perf-top.txt
@@ -112,7 +112,7 @@
-s::
--sort::
- Sort by key(s): pid, comm, dso, symbol, parent
+ Sort by key(s): pid, comm, dso, symbol, parent, srcline.
-n::
--show-nr-samples::
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 0eee64c..75d74e5 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -155,7 +155,7 @@
### --- END CONFIGURATION SECTION ---
-BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include -I$(OUTPUT)/util -I$(TRACE_EVENT_DIR) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
+BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include -I$(OUTPUT)util -I$(TRACE_EVENT_DIR) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
BASIC_LDFLAGS =
# Guard against environment variables
@@ -503,6 +503,7 @@
LIB_OBJS += $(OUTPUT)ui/progress.o
LIB_OBJS += $(OUTPUT)ui/util.o
LIB_OBJS += $(OUTPUT)ui/tui/setup.o
+ LIB_OBJS += $(OUTPUT)ui/tui/util.o
LIB_H += ui/browser.h
LIB_H += ui/browsers/map.h
LIB_H += ui/helpline.h
@@ -522,13 +523,18 @@
msg := $(warning GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev);
BASIC_CFLAGS += -DNO_GTK2_SUPPORT
else
+ ifeq ($(call try-cc,$(SOURCE_GTK2_INFOBAR),$(FLAGS_GTK2)),y)
+ BASIC_CFLAGS += -DHAVE_GTK_INFO_BAR
+ endif
BASIC_CFLAGS += $(shell pkg-config --cflags gtk+-2.0)
EXTLIBS += $(shell pkg-config --libs gtk+-2.0)
LIB_OBJS += $(OUTPUT)ui/gtk/browser.o
LIB_OBJS += $(OUTPUT)ui/gtk/setup.o
+ LIB_OBJS += $(OUTPUT)ui/gtk/util.o
# Make sure that it'd be included only once.
ifneq ($(findstring -DNO_NEWT_SUPPORT,$(BASIC_CFLAGS)),)
LIB_OBJS += $(OUTPUT)ui/setup.o
+ LIB_OBJS += $(OUTPUT)ui/util.o
endif
endif
endif
diff --git a/tools/perf/bench/mem-memcpy.c b/tools/perf/bench/mem-memcpy.c
index 7155722..02dad5d 100644
--- a/tools/perf/bench/mem-memcpy.c
+++ b/tools/perf/bench/mem-memcpy.c
@@ -24,21 +24,21 @@
static const char *length_str = "1MB";
static const char *routine = "default";
static int iterations = 1;
-static bool use_clock;
-static int clock_fd;
+static bool use_cycle;
+static int cycle_fd;
static bool only_prefault;
static bool no_prefault;
static const struct option options[] = {
OPT_STRING('l', "length", &length_str, "1MB",
"Specify length of memory to copy. "
- "available unit: B, MB, GB (upper and lower)"),
+ "Available units: B, KB, MB, GB and TB (upper and lower)"),
OPT_STRING('r', "routine", &routine, "default",
"Specify routine to copy"),
OPT_INTEGER('i', "iterations", &iterations,
"repeat memcpy() invocation this number of times"),
- OPT_BOOLEAN('c', "clock", &use_clock,
- "Use CPU clock for measuring"),
+ OPT_BOOLEAN('c', "cycle", &use_cycle,
+ "Use cycles event instead of gettimeofday() for measuring"),
OPT_BOOLEAN('o', "only-prefault", &only_prefault,
"Show only the result with page faults before memcpy()"),
OPT_BOOLEAN('n', "no-prefault", &no_prefault,
@@ -76,27 +76,27 @@
NULL
};
-static struct perf_event_attr clock_attr = {
+static struct perf_event_attr cycle_attr = {
.type = PERF_TYPE_HARDWARE,
.config = PERF_COUNT_HW_CPU_CYCLES
};
-static void init_clock(void)
+static void init_cycle(void)
{
- clock_fd = sys_perf_event_open(&clock_attr, getpid(), -1, -1, 0);
+ cycle_fd = sys_perf_event_open(&cycle_attr, getpid(), -1, -1, 0);
- if (clock_fd < 0 && errno == ENOSYS)
+ if (cycle_fd < 0 && errno == ENOSYS)
die("No CONFIG_PERF_EVENTS=y kernel support configured?\n");
else
- BUG_ON(clock_fd < 0);
+ BUG_ON(cycle_fd < 0);
}
-static u64 get_clock(void)
+static u64 get_cycle(void)
{
int ret;
u64 clk;
- ret = read(clock_fd, &clk, sizeof(u64));
+ ret = read(cycle_fd, &clk, sizeof(u64));
BUG_ON(ret != sizeof(u64));
return clk;
@@ -119,9 +119,9 @@
die("memory allocation failed - maybe length is too large?\n");
}
-static u64 do_memcpy_clock(memcpy_t fn, size_t len, bool prefault)
+static u64 do_memcpy_cycle(memcpy_t fn, size_t len, bool prefault)
{
- u64 clock_start = 0ULL, clock_end = 0ULL;
+ u64 cycle_start = 0ULL, cycle_end = 0ULL;
void *src = NULL, *dst = NULL;
int i;
@@ -130,14 +130,14 @@
if (prefault)
fn(dst, src, len);
- clock_start = get_clock();
+ cycle_start = get_cycle();
for (i = 0; i < iterations; ++i)
fn(dst, src, len);
- clock_end = get_clock();
+ cycle_end = get_cycle();
free(src);
free(dst);
- return clock_end - clock_start;
+ return cycle_end - cycle_start;
}
static double do_memcpy_gettimeofday(memcpy_t fn, size_t len, bool prefault)
@@ -182,17 +182,17 @@
int i;
size_t len;
double result_bps[2];
- u64 result_clock[2];
+ u64 result_cycle[2];
argc = parse_options(argc, argv, options,
bench_mem_memcpy_usage, 0);
- if (use_clock)
- init_clock();
+ if (use_cycle)
+ init_cycle();
len = (size_t)perf_atoll((char *)length_str);
- result_clock[0] = result_clock[1] = 0ULL;
+ result_cycle[0] = result_cycle[1] = 0ULL;
result_bps[0] = result_bps[1] = 0.0;
if ((s64)len <= 0) {
@@ -223,11 +223,11 @@
if (!only_prefault && !no_prefault) {
/* show both of results */
- if (use_clock) {
- result_clock[0] =
- do_memcpy_clock(routines[i].fn, len, false);
- result_clock[1] =
- do_memcpy_clock(routines[i].fn, len, true);
+ if (use_cycle) {
+ result_cycle[0] =
+ do_memcpy_cycle(routines[i].fn, len, false);
+ result_cycle[1] =
+ do_memcpy_cycle(routines[i].fn, len, true);
} else {
result_bps[0] =
do_memcpy_gettimeofday(routines[i].fn,
@@ -237,9 +237,9 @@
len, true);
}
} else {
- if (use_clock) {
- result_clock[pf] =
- do_memcpy_clock(routines[i].fn,
+ if (use_cycle) {
+ result_cycle[pf] =
+ do_memcpy_cycle(routines[i].fn,
len, only_prefault);
} else {
result_bps[pf] =
@@ -251,12 +251,12 @@
switch (bench_format) {
case BENCH_FORMAT_DEFAULT:
if (!only_prefault && !no_prefault) {
- if (use_clock) {
- printf(" %14lf Clock/Byte\n",
- (double)result_clock[0]
+ if (use_cycle) {
+ printf(" %14lf Cycle/Byte\n",
+ (double)result_cycle[0]
/ (double)len);
- printf(" %14lf Clock/Byte (with prefault)\n",
- (double)result_clock[1]
+ printf(" %14lf Cycle/Byte (with prefault)\n",
+ (double)result_cycle[1]
/ (double)len);
} else {
print_bps(result_bps[0]);
@@ -265,9 +265,9 @@
printf(" (with prefault)\n");
}
} else {
- if (use_clock) {
- printf(" %14lf Clock/Byte",
- (double)result_clock[pf]
+ if (use_cycle) {
+ printf(" %14lf Cycle/Byte",
+ (double)result_cycle[pf]
/ (double)len);
} else
print_bps(result_bps[pf]);
@@ -277,17 +277,17 @@
break;
case BENCH_FORMAT_SIMPLE:
if (!only_prefault && !no_prefault) {
- if (use_clock) {
+ if (use_cycle) {
printf("%lf %lf\n",
- (double)result_clock[0] / (double)len,
- (double)result_clock[1] / (double)len);
+ (double)result_cycle[0] / (double)len,
+ (double)result_cycle[1] / (double)len);
} else {
printf("%lf %lf\n",
result_bps[0], result_bps[1]);
}
} else {
- if (use_clock) {
- printf("%lf\n", (double)result_clock[pf]
+ if (use_cycle) {
+ printf("%lf\n", (double)result_cycle[pf]
/ (double)len);
} else
printf("%lf\n", result_bps[pf]);
diff --git a/tools/perf/bench/mem-memset.c b/tools/perf/bench/mem-memset.c
index e907918..350cc95 100644
--- a/tools/perf/bench/mem-memset.c
+++ b/tools/perf/bench/mem-memset.c
@@ -24,21 +24,21 @@
static const char *length_str = "1MB";
static const char *routine = "default";
static int iterations = 1;
-static bool use_clock;
-static int clock_fd;
+static bool use_cycle;
+static int cycle_fd;
static bool only_prefault;
static bool no_prefault;
static const struct option options[] = {
OPT_STRING('l', "length", &length_str, "1MB",
- "Specify length of memory to copy. "
- "available unit: B, MB, GB (upper and lower)"),
+ "Specify length of memory to set. "
+ "Available units: B, KB, MB, GB and TB (upper and lower)"),
OPT_STRING('r', "routine", &routine, "default",
- "Specify routine to copy"),
+ "Specify routine to set"),
OPT_INTEGER('i', "iterations", &iterations,
"repeat memset() invocation this number of times"),
- OPT_BOOLEAN('c', "clock", &use_clock,
- "Use CPU clock for measuring"),
+ OPT_BOOLEAN('c', "cycle", &use_cycle,
+ "Use cycles event instead of gettimeofday() for measuring"),
OPT_BOOLEAN('o', "only-prefault", &only_prefault,
"Show only the result with page faults before memset()"),
OPT_BOOLEAN('n', "no-prefault", &no_prefault,
@@ -76,27 +76,27 @@
NULL
};
-static struct perf_event_attr clock_attr = {
+static struct perf_event_attr cycle_attr = {
.type = PERF_TYPE_HARDWARE,
.config = PERF_COUNT_HW_CPU_CYCLES
};
-static void init_clock(void)
+static void init_cycle(void)
{
- clock_fd = sys_perf_event_open(&clock_attr, getpid(), -1, -1, 0);
+ cycle_fd = sys_perf_event_open(&cycle_attr, getpid(), -1, -1, 0);
- if (clock_fd < 0 && errno == ENOSYS)
+ if (cycle_fd < 0 && errno == ENOSYS)
die("No CONFIG_PERF_EVENTS=y kernel support configured?\n");
else
- BUG_ON(clock_fd < 0);
+ BUG_ON(cycle_fd < 0);
}
-static u64 get_clock(void)
+static u64 get_cycle(void)
{
int ret;
u64 clk;
- ret = read(clock_fd, &clk, sizeof(u64));
+ ret = read(cycle_fd, &clk, sizeof(u64));
BUG_ON(ret != sizeof(u64));
return clk;
@@ -115,9 +115,9 @@
die("memory allocation failed - maybe length is too large?\n");
}
-static u64 do_memset_clock(memset_t fn, size_t len, bool prefault)
+static u64 do_memset_cycle(memset_t fn, size_t len, bool prefault)
{
- u64 clock_start = 0ULL, clock_end = 0ULL;
+ u64 cycle_start = 0ULL, cycle_end = 0ULL;
void *dst = NULL;
int i;
@@ -126,13 +126,13 @@
if (prefault)
fn(dst, -1, len);
- clock_start = get_clock();
+ cycle_start = get_cycle();
for (i = 0; i < iterations; ++i)
fn(dst, i, len);
- clock_end = get_clock();
+ cycle_end = get_cycle();
free(dst);
- return clock_end - clock_start;
+ return cycle_end - cycle_start;
}
static double do_memset_gettimeofday(memset_t fn, size_t len, bool prefault)
@@ -176,17 +176,17 @@
int i;
size_t len;
double result_bps[2];
- u64 result_clock[2];
+ u64 result_cycle[2];
argc = parse_options(argc, argv, options,
bench_mem_memset_usage, 0);
- if (use_clock)
- init_clock();
+ if (use_cycle)
+ init_cycle();
len = (size_t)perf_atoll((char *)length_str);
- result_clock[0] = result_clock[1] = 0ULL;
+ result_cycle[0] = result_cycle[1] = 0ULL;
result_bps[0] = result_bps[1] = 0.0;
if ((s64)len <= 0) {
@@ -217,11 +217,11 @@
if (!only_prefault && !no_prefault) {
/* show both of results */
- if (use_clock) {
- result_clock[0] =
- do_memset_clock(routines[i].fn, len, false);
- result_clock[1] =
- do_memset_clock(routines[i].fn, len, true);
+ if (use_cycle) {
+ result_cycle[0] =
+ do_memset_cycle(routines[i].fn, len, false);
+ result_cycle[1] =
+ do_memset_cycle(routines[i].fn, len, true);
} else {
result_bps[0] =
do_memset_gettimeofday(routines[i].fn,
@@ -231,9 +231,9 @@
len, true);
}
} else {
- if (use_clock) {
- result_clock[pf] =
- do_memset_clock(routines[i].fn,
+ if (use_cycle) {
+ result_cycle[pf] =
+ do_memset_cycle(routines[i].fn,
len, only_prefault);
} else {
result_bps[pf] =
@@ -245,12 +245,12 @@
switch (bench_format) {
case BENCH_FORMAT_DEFAULT:
if (!only_prefault && !no_prefault) {
- if (use_clock) {
- printf(" %14lf Clock/Byte\n",
- (double)result_clock[0]
+ if (use_cycle) {
+ printf(" %14lf Cycle/Byte\n",
+ (double)result_cycle[0]
/ (double)len);
- printf(" %14lf Clock/Byte (with prefault)\n ",
- (double)result_clock[1]
+ printf(" %14lf Cycle/Byte (with prefault)\n ",
+ (double)result_cycle[1]
/ (double)len);
} else {
print_bps(result_bps[0]);
@@ -259,9 +259,9 @@
printf(" (with prefault)\n");
}
} else {
- if (use_clock) {
- printf(" %14lf Clock/Byte",
- (double)result_clock[pf]
+ if (use_cycle) {
+ printf(" %14lf Cycle/Byte",
+ (double)result_cycle[pf]
/ (double)len);
} else
print_bps(result_bps[pf]);
@@ -271,17 +271,17 @@
break;
case BENCH_FORMAT_SIMPLE:
if (!only_prefault && !no_prefault) {
- if (use_clock) {
+ if (use_cycle) {
printf("%lf %lf\n",
- (double)result_clock[0] / (double)len,
- (double)result_clock[1] / (double)len);
+ (double)result_cycle[0] / (double)len,
+ (double)result_cycle[1] / (double)len);
} else {
printf("%lf %lf\n",
result_bps[0], result_bps[1]);
}
} else {
- if (use_clock) {
- printf("%lf\n", (double)result_clock[pf]
+ if (use_cycle) {
+ printf("%lf\n", (double)result_cycle[pf]
/ (double)len);
} else
printf("%lf\n", result_bps[pf]);
diff --git a/tools/perf/builtin-bench.c b/tools/perf/builtin-bench.c
index b0e74ab..1f31002 100644
--- a/tools/perf/builtin-bench.c
+++ b/tools/perf/builtin-bench.c
@@ -33,7 +33,7 @@
};
\
/* sentinel: easy for help */
-#define suite_all { "all", "test all suite (pseudo suite)", NULL }
+#define suite_all { "all", "Test all benchmark suites", NULL }
static struct bench_suite sched_suites[] = {
{ "messaging",
@@ -75,7 +75,7 @@
"memory access performance",
mem_suites },
{ "all", /* sentinel: easy for help */
- "test all subsystem (pseudo subsystem)",
+ "all benchmark subsystem",
NULL },
{ NULL,
NULL,
diff --git a/tools/perf/builtin-evlist.c b/tools/perf/builtin-evlist.c
index acd78dc..0dd5a05 100644
--- a/tools/perf/builtin-evlist.c
+++ b/tools/perf/builtin-evlist.c
@@ -60,7 +60,7 @@
list_for_each_entry(pos, &session->evlist->entries, node) {
bool first = true;
- printf("%s", event_name(pos));
+ printf("%s", perf_evsel__name(pos));
if (details->verbose || details->freq) {
comma_printf(&first, " sample_freq=%" PRIu64,
diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c
index 547af48..ce35015 100644
--- a/tools/perf/builtin-kmem.c
+++ b/tools/perf/builtin-kmem.c
@@ -57,6 +57,11 @@
#define PATH_SYS_NODE "/sys/devices/system/node"
+struct perf_kmem {
+ struct perf_tool tool;
+ struct perf_session *session;
+};
+
static void init_cpunode_map(void)
{
FILE *fp;
@@ -278,14 +283,16 @@
s_alloc->alloc_cpu = -1;
}
-static void process_raw_event(union perf_event *raw_event __used, void *data,
+static void process_raw_event(struct perf_tool *tool,
+ union perf_event *raw_event __used, void *data,
int cpu, u64 timestamp, struct thread *thread)
{
+ struct perf_kmem *kmem = container_of(tool, struct perf_kmem, tool);
struct event_format *event;
int type;
- type = trace_parse_common_type(data);
- event = trace_find_event(type);
+ type = trace_parse_common_type(kmem->session->pevent, data);
+ event = pevent_find_event(kmem->session->pevent, type);
if (!strcmp(event->name, "kmalloc") ||
!strcmp(event->name, "kmem_cache_alloc")) {
@@ -306,7 +313,7 @@
}
}
-static int process_sample_event(struct perf_tool *tool __used,
+static int process_sample_event(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct perf_evsel *evsel __used,
@@ -322,16 +329,18 @@
dump_printf(" ... thread: %s:%d\n", thread->comm, thread->pid);
- process_raw_event(event, sample->raw_data, sample->cpu,
+ process_raw_event(tool, event, sample->raw_data, sample->cpu,
sample->time, thread);
return 0;
}
-static struct perf_tool perf_kmem = {
- .sample = process_sample_event,
- .comm = perf_event__process_comm,
- .ordered_samples = true,
+static struct perf_kmem perf_kmem = {
+ .tool = {
+ .sample = process_sample_event,
+ .comm = perf_event__process_comm,
+ .ordered_samples = true,
+ },
};
static double fragmentation(unsigned long n_req, unsigned long n_alloc)
@@ -486,11 +495,15 @@
static int __cmd_kmem(void)
{
int err = -EINVAL;
- struct perf_session *session = perf_session__new(input_name, O_RDONLY,
- 0, false, &perf_kmem);
+ struct perf_session *session;
+
+ session = perf_session__new(input_name, O_RDONLY, 0, false,
+ &perf_kmem.tool);
if (session == NULL)
return -ENOMEM;
+ perf_kmem.session = session;
+
if (perf_session__create_kernel_maps(session) < 0)
goto out_delete;
@@ -498,7 +511,7 @@
goto out_delete;
setup_pager();
- err = perf_session__process_events(session, &perf_kmem);
+ err = perf_session__process_events(session, &perf_kmem.tool);
if (err != 0)
goto out_delete;
sort_result();
diff --git a/tools/perf/builtin-lock.c b/tools/perf/builtin-lock.c
index fd53319..b3c4285 100644
--- a/tools/perf/builtin-lock.c
+++ b/tools/perf/builtin-lock.c
@@ -724,8 +724,8 @@
struct event_format *event;
int type;
- type = trace_parse_common_type(data);
- event = trace_find_event(type);
+ type = trace_parse_common_type(session->pevent, data);
+ event = pevent_find_event(session->pevent, type);
if (!strcmp(event->name, "lock_acquire"))
process_lock_acquire_event(data, event, cpu, timestamp, thread);
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index f95840d..f5a6452 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -265,7 +265,7 @@
if (err == ENOENT) {
ui__error("The %s event is not supported.\n",
- event_name(pos));
+ perf_evsel__name(pos));
exit(EXIT_FAILURE);
}
@@ -916,7 +916,7 @@
usage_with_options(record_usage, record_options);
list_for_each_entry(pos, &evsel_list->entries, node) {
- if (perf_header__push_event(pos->attr.config, event_name(pos)))
+ if (perf_header__push_event(pos->attr.config, perf_evsel__name(pos)))
goto out_free_fd;
}
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 25249f7..69b1c11 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -69,7 +69,7 @@
if ((sort__has_parent || symbol_conf.use_callchain)
&& sample->callchain) {
- err = machine__resolve_callchain(machine, evsel, al->thread,
+ err = machine__resolve_callchain(machine, al->thread,
sample->callchain, &parent);
if (err)
return err;
@@ -140,7 +140,7 @@
struct hist_entry *he;
if ((sort__has_parent || symbol_conf.use_callchain) && sample->callchain) {
- err = machine__resolve_callchain(machine, evsel, al->thread,
+ err = machine__resolve_callchain(machine, al->thread,
sample->callchain, &parent);
if (err)
return err;
@@ -230,7 +230,7 @@
struct perf_report *rep = container_of(tool, struct perf_report, tool);
if (rep->show_threads) {
- const char *name = evsel ? event_name(evsel) : "unknown";
+ const char *name = evsel ? perf_evsel__name(evsel) : "unknown";
perf_read_values_add_value(&rep->show_threads_values,
event->read.pid, event->read.tid,
event->read.id,
@@ -239,17 +239,18 @@
}
dump_printf(": %d %d %s %" PRIu64 "\n", event->read.pid, event->read.tid,
- evsel ? event_name(evsel) : "FAIL",
+ evsel ? perf_evsel__name(evsel) : "FAIL",
event->read.value);
return 0;
}
+/* For pipe mode, sample_type is not currently set */
static int perf_report__setup_sample_type(struct perf_report *rep)
{
struct perf_session *self = rep->session;
- if (!(self->sample_type & PERF_SAMPLE_CALLCHAIN)) {
+ if (!self->fd_pipe && !(self->sample_type & PERF_SAMPLE_CALLCHAIN)) {
if (sort__has_parent) {
ui__error("Selected --sort parent, but no "
"callchain data. Did you call "
@@ -272,7 +273,8 @@
}
if (sort__branch_mode == 1) {
- if (!(self->sample_type & PERF_SAMPLE_BRANCH_STACK)) {
+ if (!self->fd_pipe &&
+ !(self->sample_type & PERF_SAMPLE_BRANCH_STACK)) {
ui__error("Selected -b but no branch data. "
"Did you call perf record without -b?\n");
return -1;
@@ -314,7 +316,7 @@
list_for_each_entry(pos, &evlist->entries, node) {
struct hists *hists = &pos->hists;
- const char *evname = event_name(pos);
+ const char *evname = perf_evsel__name(pos);
hists__fprintf_nr_sample_events(hists, evname, stdout);
hists__fprintf(hists, NULL, false, true, 0, 0, stdout);
diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c
index b125e07..7a9ad2b 100644
--- a/tools/perf/builtin-sched.c
+++ b/tools/perf/builtin-sched.c
@@ -43,6 +43,11 @@
static unsigned long nr_tasks;
+struct perf_sched {
+ struct perf_tool tool;
+ struct perf_session *session;
+};
+
struct sched_atom;
struct task_desc {
@@ -1597,11 +1602,13 @@
struct perf_evsel *evsel,
struct machine *machine)
{
+ struct perf_sched *sched = container_of(tool, struct perf_sched, tool);
+ struct pevent *pevent = sched->session->pevent;
struct thread *thread = machine__findnew_thread(machine, sample->pid);
if (thread == NULL) {
pr_debug("problem processing %s event, skipping it.\n",
- evsel->name);
+ perf_evsel__name(evsel));
return -1;
}
@@ -1612,7 +1619,8 @@
tracepoint_handler f = evsel->handler.func;
if (evsel->handler.data == NULL)
- evsel->handler.data = trace_find_event(evsel->attr.config);
+ evsel->handler.data = pevent_find_event(pevent,
+ evsel->attr.config);
f(tool, evsel->handler.data, sample, machine, thread);
}
@@ -1620,12 +1628,14 @@
return 0;
}
-static struct perf_tool perf_sched = {
- .sample = perf_sched__process_tracepoint_sample,
- .comm = perf_event__process_comm,
- .lost = perf_event__process_lost,
- .fork = perf_event__process_task,
- .ordered_samples = true,
+static struct perf_sched perf_sched = {
+ .tool = {
+ .sample = perf_sched__process_tracepoint_sample,
+ .comm = perf_event__process_comm,
+ .lost = perf_event__process_lost,
+ .fork = perf_event__process_task,
+ .ordered_samples = true,
+ },
};
static void read_events(bool destroy, struct perf_session **psession)
@@ -1640,16 +1650,20 @@
{ "sched:sched_process_exit", process_sched_exit_event, },
{ "sched:sched_migrate_task", process_sched_migrate_task_event, },
};
- struct perf_session *session = perf_session__new(input_name, O_RDONLY,
- 0, false, &perf_sched);
+ struct perf_session *session;
+
+ session = perf_session__new(input_name, O_RDONLY, 0, false,
+ &perf_sched.tool);
if (session == NULL)
die("No Memory");
- err = perf_evlist__set_tracepoints_handlers_array(session->evlist, handlers);
+ perf_sched.session = session;
+
+ err = perf_session__set_tracepoints_handlers(session, handlers);
assert(err == 0);
if (perf_session__has_traces(session, "record -R")) {
- err = perf_session__process_events(session, &perf_sched);
+ err = perf_session__process_events(session, &perf_sched.tool);
if (err)
die("Failed to process events, error %d", err);
diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c
index 8e395a5..1e60ab7 100644
--- a/tools/perf/builtin-script.c
+++ b/tools/perf/builtin-script.c
@@ -28,6 +28,11 @@
static const char *cpu_list;
static DECLARE_BITMAP(cpu_bitmap, MAX_NR_CPUS);
+struct perf_script {
+ struct perf_tool tool;
+ struct perf_session *session;
+};
+
enum perf_output_field {
PERF_OUTPUT_COMM = 1U << 0,
PERF_OUTPUT_TID = 1U << 1,
@@ -137,10 +142,11 @@
#define PRINT_FIELD(x) (output[attr->type].fields & PERF_OUTPUT_##x)
-static int perf_event_attr__check_stype(struct perf_event_attr *attr,
- u64 sample_type, const char *sample_msg,
- enum perf_output_field field)
+static int perf_evsel__check_stype(struct perf_evsel *evsel,
+ u64 sample_type, const char *sample_msg,
+ enum perf_output_field field)
{
+ struct perf_event_attr *attr = &evsel->attr;
int type = attr->type;
const char *evname;
@@ -148,7 +154,7 @@
return 0;
if (output[type].user_set) {
- evname = __event_name(attr->type, attr->config);
+ evname = perf_evsel__name(evsel);
pr_err("Samples for '%s' event do not have %s attribute set. "
"Cannot print '%s' field.\n",
evname, sample_msg, output_field2str(field));
@@ -157,7 +163,7 @@
/* user did not ask for it explicitly so remove from the default list */
output[type].fields &= ~field;
- evname = __event_name(attr->type, attr->config);
+ evname = perf_evsel__name(evsel);
pr_debug("Samples for '%s' event do not have %s attribute set. "
"Skipping '%s' field.\n",
evname, sample_msg, output_field2str(field));
@@ -175,8 +181,8 @@
return -EINVAL;
if (PRINT_FIELD(IP)) {
- if (perf_event_attr__check_stype(attr, PERF_SAMPLE_IP, "IP",
- PERF_OUTPUT_IP))
+ if (perf_evsel__check_stype(evsel, PERF_SAMPLE_IP, "IP",
+ PERF_OUTPUT_IP))
return -EINVAL;
if (!no_callchain &&
@@ -185,8 +191,8 @@
}
if (PRINT_FIELD(ADDR) &&
- perf_event_attr__check_stype(attr, PERF_SAMPLE_ADDR, "ADDR",
- PERF_OUTPUT_ADDR))
+ perf_evsel__check_stype(evsel, PERF_SAMPLE_ADDR, "ADDR",
+ PERF_OUTPUT_ADDR))
return -EINVAL;
if (PRINT_FIELD(SYM) && !PRINT_FIELD(IP) && !PRINT_FIELD(ADDR)) {
@@ -208,18 +214,18 @@
}
if ((PRINT_FIELD(PID) || PRINT_FIELD(TID)) &&
- perf_event_attr__check_stype(attr, PERF_SAMPLE_TID, "TID",
- PERF_OUTPUT_TID|PERF_OUTPUT_PID))
+ perf_evsel__check_stype(evsel, PERF_SAMPLE_TID, "TID",
+ PERF_OUTPUT_TID|PERF_OUTPUT_PID))
return -EINVAL;
if (PRINT_FIELD(TIME) &&
- perf_event_attr__check_stype(attr, PERF_SAMPLE_TIME, "TIME",
- PERF_OUTPUT_TIME))
+ perf_evsel__check_stype(evsel, PERF_SAMPLE_TIME, "TIME",
+ PERF_OUTPUT_TIME))
return -EINVAL;
if (PRINT_FIELD(CPU) &&
- perf_event_attr__check_stype(attr, PERF_SAMPLE_CPU, "CPU",
- PERF_OUTPUT_CPU))
+ perf_evsel__check_stype(evsel, PERF_SAMPLE_CPU, "CPU",
+ PERF_OUTPUT_CPU))
return -EINVAL;
return 0;
@@ -256,11 +262,13 @@
return 0;
}
-static void print_sample_start(struct perf_sample *sample,
+static void print_sample_start(struct pevent *pevent,
+ struct perf_sample *sample,
struct thread *thread,
- struct perf_event_attr *attr)
+ struct perf_evsel *evsel)
{
int type;
+ struct perf_event_attr *attr = &evsel->attr;
struct event_format *event;
const char *evname = NULL;
unsigned long secs;
@@ -300,12 +308,18 @@
if (PRINT_FIELD(EVNAME)) {
if (attr->type == PERF_TYPE_TRACEPOINT) {
- type = trace_parse_common_type(sample->raw_data);
- event = trace_find_event(type);
+ /*
+ * XXX Do we really need this here?
+ * perf_evlist__set_tracepoint_names should have done
+ * this already
+ */
+ type = trace_parse_common_type(pevent,
+ sample->raw_data);
+ event = pevent_find_event(pevent, type);
if (event)
evname = event->name;
} else
- evname = __event_name(attr->type, attr->config);
+ evname = perf_evsel__name(evsel);
printf("%s: ", evname ? evname : "[unknown]");
}
@@ -387,7 +401,7 @@
printf(" ");
else
printf("\n");
- perf_event__print_ip(event, sample, machine, evsel,
+ perf_event__print_ip(event, sample, machine,
PRINT_FIELD(SYM), PRINT_FIELD(DSO),
PRINT_FIELD(SYMOFFSET));
}
@@ -402,6 +416,7 @@
}
static void process_event(union perf_event *event __unused,
+ struct pevent *pevent,
struct perf_sample *sample,
struct perf_evsel *evsel,
struct machine *machine,
@@ -412,7 +427,7 @@
if (output[attr->type].fields == 0)
return;
- print_sample_start(sample, thread, attr);
+ print_sample_start(pevent, sample, thread, evsel);
if (is_bts_event(attr)) {
print_sample_bts(event, sample, evsel, machine, thread);
@@ -420,7 +435,7 @@
}
if (PRINT_FIELD(TRACE))
- print_trace_event(sample->cpu, sample->raw_data,
+ print_trace_event(pevent, sample->cpu, sample->raw_data,
sample->raw_size);
if (PRINT_FIELD(ADDR))
@@ -431,7 +446,7 @@
printf(" ");
else
printf("\n");
- perf_event__print_ip(event, sample, machine, evsel,
+ perf_event__print_ip(event, sample, machine,
PRINT_FIELD(SYM), PRINT_FIELD(DSO),
PRINT_FIELD(SYMOFFSET));
}
@@ -451,7 +466,8 @@
return 0;
}
-static int default_generate_script(const char *outfile __unused)
+static int default_generate_script(struct pevent *pevent __unused,
+ const char *outfile __unused)
{
return 0;
}
@@ -489,6 +505,7 @@
struct machine *machine)
{
struct addr_location al;
+ struct perf_script *scr = container_of(tool, struct perf_script, tool);
struct thread *thread = machine__findnew_thread(machine, event->ip.tid);
if (thread == NULL) {
@@ -520,24 +537,27 @@
if (cpu_list && !test_bit(sample->cpu, cpu_bitmap))
return 0;
- scripting_ops->process_event(event, sample, evsel, machine, thread);
+ scripting_ops->process_event(event, scr->session->pevent,
+ sample, evsel, machine, thread);
evsel->hists.stats.total_period += sample->period;
return 0;
}
-static struct perf_tool perf_script = {
- .sample = process_sample_event,
- .mmap = perf_event__process_mmap,
- .comm = perf_event__process_comm,
- .exit = perf_event__process_task,
- .fork = perf_event__process_task,
- .attr = perf_event__process_attr,
- .event_type = perf_event__process_event_type,
- .tracing_data = perf_event__process_tracing_data,
- .build_id = perf_event__process_build_id,
- .ordered_samples = true,
- .ordering_requires_timestamps = true,
+static struct perf_script perf_script = {
+ .tool = {
+ .sample = process_sample_event,
+ .mmap = perf_event__process_mmap,
+ .comm = perf_event__process_comm,
+ .exit = perf_event__process_task,
+ .fork = perf_event__process_task,
+ .attr = perf_event__process_attr,
+ .event_type = perf_event__process_event_type,
+ .tracing_data = perf_event__process_tracing_data,
+ .build_id = perf_event__process_build_id,
+ .ordered_samples = true,
+ .ordering_requires_timestamps = true,
+ },
};
extern volatile int session_done;
@@ -553,7 +573,7 @@
signal(SIGINT, sig_handler);
- ret = perf_session__process_events(session, &perf_script);
+ ret = perf_session__process_events(session, &perf_script.tool);
if (debug_mode)
pr_err("Misordered timestamps: %" PRIu64 "\n", nr_unordered);
@@ -1335,10 +1355,13 @@
if (!script_name)
setup_pager();
- session = perf_session__new(input_name, O_RDONLY, 0, false, &perf_script);
+ session = perf_session__new(input_name, O_RDONLY, 0, false,
+ &perf_script.tool);
if (session == NULL)
return -ENOMEM;
+ perf_script.session = session;
+
if (cpu_list) {
if (perf_session__cpu_bitmap(session, cpu_list, cpu_bitmap))
return -1;
@@ -1384,7 +1407,8 @@
return -1;
}
- err = scripting_ops->generate_script("perf-script");
+ err = scripting_ops->generate_script(session->pevent,
+ "perf-script");
goto out;
}
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 2625899..861f0ae 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -391,7 +391,7 @@
if (verbose) {
fprintf(output, "%s: %" PRIu64 " %" PRIu64 " %" PRIu64 "\n",
- event_name(counter), count[0], count[1], count[2]);
+ perf_evsel__name(counter), count[0], count[1], count[2]);
}
/*
@@ -496,7 +496,7 @@
errno == ENXIO) {
if (verbose)
ui__warning("%s event is not supported by the kernel.\n",
- event_name(counter));
+ perf_evsel__name(counter));
counter->supported = false;
continue;
}
@@ -594,7 +594,7 @@
csv_output ? 0 : -4,
evsel_list->cpus->map[cpu], csv_sep);
- fprintf(output, fmt, cpustr, msecs, csv_sep, event_name(evsel));
+ fprintf(output, fmt, cpustr, msecs, csv_sep, perf_evsel__name(evsel));
if (evsel->cgrp)
fprintf(output, "%s%s", csv_sep, evsel->cgrp->name);
@@ -792,7 +792,7 @@
else
cpu = 0;
- fprintf(output, fmt, cpustr, avg, csv_sep, event_name(evsel));
+ fprintf(output, fmt, cpustr, avg, csv_sep, perf_evsel__name(evsel));
if (evsel->cgrp)
fprintf(output, "%s%s", csv_sep, evsel->cgrp->name);
@@ -908,7 +908,7 @@
counter->supported ? CNTR_NOT_COUNTED : CNTR_NOT_SUPPORTED,
csv_sep,
csv_output ? 0 : -24,
- event_name(counter));
+ perf_evsel__name(counter));
if (counter->cgrp)
fprintf(output, "%s%s", csv_sep, counter->cgrp->name);
@@ -961,7 +961,7 @@
counter->supported ? CNTR_NOT_COUNTED : CNTR_NOT_SUPPORTED,
csv_sep,
csv_output ? 0 : -24,
- event_name(counter));
+ perf_evsel__name(counter));
if (counter->cgrp)
fprintf(output, "%s%s",
@@ -1179,6 +1179,12 @@
fprintf(stderr, "cannot use both --output and --log-fd\n");
usage_with_options(stat_usage, options);
}
+
+ if (output_fd < 0) {
+ fprintf(stderr, "argument to --log-fd must be a > 0\n");
+ usage_with_options(stat_usage, options);
+ }
+
if (!output) {
struct timespec tm;
mode = append_file ? "a" : "w";
@@ -1190,7 +1196,7 @@
}
clock_gettime(CLOCK_REALTIME, &tm);
fprintf(output, "# started on %s\n", ctime(&tm.tv_sec));
- } else if (output_fd != 2) {
+ } else if (output_fd > 0) {
mode = append_file ? "a" : "w";
output = fdopen(output_fd, mode);
if (!output) {
diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c
index 5a8727c..5ce3030 100644
--- a/tools/perf/builtin-test.c
+++ b/tools/perf/builtin-test.c
@@ -583,7 +583,7 @@
if (nr_events[evsel->idx] != expected_nr_events[evsel->idx]) {
pr_debug("expected %d %s events, got %d\n",
expected_nr_events[evsel->idx],
- event_name(evsel), nr_events[evsel->idx]);
+ perf_evsel__name(evsel), nr_events[evsel->idx]);
goto out_munmap;
}
}
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 6bb0277..e3cab5f 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -245,7 +245,7 @@
if (notes->src == NULL)
goto out_unlock;
- printf("Showing %s for %s\n", event_name(top->sym_evsel), symbol->name);
+ printf("Showing %s for %s\n", perf_evsel__name(top->sym_evsel), symbol->name);
printf(" Events Pcnt (>=%d%%)\n", top->sym_pcnt_filter);
more = symbol__annotate_printf(symbol, he->ms.map, top->sym_evsel->idx,
@@ -408,7 +408,7 @@
fprintf(stdout, "\t[e] display entries (lines). \t(%d)\n", top->print_entries);
if (top->evlist->nr_entries > 1)
- fprintf(stdout, "\t[E] active event counter. \t(%s)\n", event_name(top->sym_evsel));
+ fprintf(stdout, "\t[E] active event counter. \t(%s)\n", perf_evsel__name(top->sym_evsel));
fprintf(stdout, "\t[f] profile display filter (count). \t(%d)\n", top->count_filter);
@@ -503,13 +503,13 @@
fprintf(stderr, "\nAvailable events:");
list_for_each_entry(top->sym_evsel, &top->evlist->entries, node)
- fprintf(stderr, "\n\t%d %s", top->sym_evsel->idx, event_name(top->sym_evsel));
+ fprintf(stderr, "\n\t%d %s", top->sym_evsel->idx, perf_evsel__name(top->sym_evsel));
prompt_integer(&counter, "Enter details event counter");
if (counter >= top->evlist->nr_entries) {
top->sym_evsel = list_entry(top->evlist->entries.next, struct perf_evsel, node);
- fprintf(stderr, "Sorry, no such event, using %s.\n", event_name(top->sym_evsel));
+ fprintf(stderr, "Sorry, no such event, using %s.\n", perf_evsel__name(top->sym_evsel));
sleep(1);
break;
}
@@ -774,7 +774,7 @@
if ((sort__has_parent || symbol_conf.use_callchain) &&
sample->callchain) {
- err = machine__resolve_callchain(machine, evsel, al.thread,
+ err = machine__resolve_callchain(machine, al.thread,
sample->callchain, &parent);
if (err)
return;
@@ -960,7 +960,7 @@
if (err == ENOENT) {
ui__error("The %s event is not supported.\n",
- event_name(counter));
+ perf_evsel__name(counter));
goto out_err;
} else if (err == EMFILE) {
ui__error("Too many events are opened.\n"
diff --git a/tools/perf/config/feature-tests.mak b/tools/perf/config/feature-tests.mak
index d9084e0..6c18785 100644
--- a/tools/perf/config/feature-tests.mak
+++ b/tools/perf/config/feature-tests.mak
@@ -78,6 +78,19 @@
return 0;
}
endef
+
+define SOURCE_GTK2_INFOBAR
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#include <gtk/gtk.h>
+#pragma GCC diagnostic error \"-Wstrict-prototypes\"
+
+int main(void)
+{
+ gtk_info_bar_new();
+
+ return 0;
+}
+endef
endif
ifndef NO_LIBPERL
diff --git a/tools/perf/ui/browsers/annotate.c b/tools/perf/ui/browsers/annotate.c
index 34b1c46..67a2703 100644
--- a/tools/perf/ui/browsers/annotate.c
+++ b/tools/perf/ui/browsers/annotate.c
@@ -814,7 +814,7 @@
{
struct disasm_line *pos, *n;
struct annotation *notes;
- const size_t size = symbol__size(sym);
+ size_t size;
struct map_symbol ms = {
.map = map,
.sym = sym,
@@ -834,6 +834,8 @@
if (sym == NULL)
return -1;
+ size = symbol__size(sym);
+
if (map->dso->annotate_warned)
return -1;
diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c
index 53f6697..482f051 100644
--- a/tools/perf/ui/browsers/hists.c
+++ b/tools/perf/ui/browsers/hists.c
@@ -23,6 +23,7 @@
struct hists *hists;
struct hist_entry *he_selection;
struct map_symbol *selection;
+ int print_seq;
bool has_symbols;
};
@@ -800,6 +801,196 @@
}
}
+static int hist_browser__fprintf_callchain_node_rb_tree(struct hist_browser *browser,
+ struct callchain_node *chain_node,
+ u64 total, int level,
+ FILE *fp)
+{
+ struct rb_node *node;
+ int offset = level * LEVEL_OFFSET_STEP;
+ u64 new_total, remaining;
+ int printed = 0;
+
+ if (callchain_param.mode == CHAIN_GRAPH_REL)
+ new_total = chain_node->children_hit;
+ else
+ new_total = total;
+
+ remaining = new_total;
+ node = rb_first(&chain_node->rb_root);
+ while (node) {
+ struct callchain_node *child = rb_entry(node, struct callchain_node, rb_node);
+ struct rb_node *next = rb_next(node);
+ u64 cumul = callchain_cumul_hits(child);
+ struct callchain_list *chain;
+ char folded_sign = ' ';
+ int first = true;
+ int extra_offset = 0;
+
+ remaining -= cumul;
+
+ list_for_each_entry(chain, &child->val, list) {
+ char ipstr[BITS_PER_LONG / 4 + 1], *alloc_str;
+ const char *str;
+ bool was_first = first;
+
+ if (first)
+ first = false;
+ else
+ extra_offset = LEVEL_OFFSET_STEP;
+
+ folded_sign = callchain_list__folded(chain);
+
+ alloc_str = NULL;
+ str = callchain_list__sym_name(chain, ipstr, sizeof(ipstr));
+ if (was_first) {
+ double percent = cumul * 100.0 / new_total;
+
+ if (asprintf(&alloc_str, "%2.2f%% %s", percent, str) < 0)
+ str = "Not enough memory!";
+ else
+ str = alloc_str;
+ }
+
+ printed += fprintf(fp, "%*s%c %s\n", offset + extra_offset, " ", folded_sign, str);
+ free(alloc_str);
+ if (folded_sign == '+')
+ break;
+ }
+
+ if (folded_sign == '-') {
+ const int new_level = level + (extra_offset ? 2 : 1);
+ printed += hist_browser__fprintf_callchain_node_rb_tree(browser, child, new_total,
+ new_level, fp);
+ }
+
+ node = next;
+ }
+
+ return printed;
+}
+
+static int hist_browser__fprintf_callchain_node(struct hist_browser *browser,
+ struct callchain_node *node,
+ int level, FILE *fp)
+{
+ struct callchain_list *chain;
+ int offset = level * LEVEL_OFFSET_STEP;
+ char folded_sign = ' ';
+ int printed = 0;
+
+ list_for_each_entry(chain, &node->val, list) {
+ char ipstr[BITS_PER_LONG / 4 + 1], *s;
+
+ folded_sign = callchain_list__folded(chain);
+ s = callchain_list__sym_name(chain, ipstr, sizeof(ipstr));
+ printed += fprintf(fp, "%*s%c %s\n", offset, " ", folded_sign, s);
+ }
+
+ if (folded_sign == '-')
+ printed += hist_browser__fprintf_callchain_node_rb_tree(browser, node,
+ browser->hists->stats.total_period,
+ level + 1, fp);
+ return printed;
+}
+
+static int hist_browser__fprintf_callchain(struct hist_browser *browser,
+ struct rb_root *chain, int level, FILE *fp)
+{
+ struct rb_node *nd;
+ int printed = 0;
+
+ for (nd = rb_first(chain); nd; nd = rb_next(nd)) {
+ struct callchain_node *node = rb_entry(nd, struct callchain_node, rb_node);
+
+ printed += hist_browser__fprintf_callchain_node(browser, node, level, fp);
+ }
+
+ return printed;
+}
+
+static int hist_browser__fprintf_entry(struct hist_browser *browser,
+ struct hist_entry *he, FILE *fp)
+{
+ char s[8192];
+ double percent;
+ int printed = 0;
+ char folded_sign = ' ';
+
+ if (symbol_conf.use_callchain)
+ folded_sign = hist_entry__folded(he);
+
+ hist_entry__snprintf(he, s, sizeof(s), browser->hists);
+ percent = (he->period * 100.0) / browser->hists->stats.total_period;
+
+ if (symbol_conf.use_callchain)
+ printed += fprintf(fp, "%c ", folded_sign);
+
+ printed += fprintf(fp, " %5.2f%%", percent);
+
+ if (symbol_conf.show_nr_samples)
+ printed += fprintf(fp, " %11u", he->nr_events);
+
+ if (symbol_conf.show_total_period)
+ printed += fprintf(fp, " %12" PRIu64, he->period);
+
+ printed += fprintf(fp, "%s\n", rtrim(s));
+
+ if (folded_sign == '-')
+ printed += hist_browser__fprintf_callchain(browser, &he->sorted_chain, 1, fp);
+
+ return printed;
+}
+
+static int hist_browser__fprintf(struct hist_browser *browser, FILE *fp)
+{
+ struct rb_node *nd = hists__filter_entries(rb_first(browser->b.entries));
+ int printed = 0;
+
+ while (nd) {
+ struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
+
+ printed += hist_browser__fprintf_entry(browser, h, fp);
+ nd = hists__filter_entries(rb_next(nd));
+ }
+
+ return printed;
+}
+
+static int hist_browser__dump(struct hist_browser *browser)
+{
+ char filename[64];
+ FILE *fp;
+
+ while (1) {
+ scnprintf(filename, sizeof(filename), "perf.hist.%d", browser->print_seq);
+ if (access(filename, F_OK))
+ break;
+ /*
+ * XXX: Just an arbitrary lazy upper limit
+ */
+ if (++browser->print_seq == 8192) {
+ ui_helpline__fpush("Too many perf.hist.N files, nothing written!");
+ return -1;
+ }
+ }
+
+ fp = fopen(filename, "w");
+ if (fp == NULL) {
+ char bf[64];
+ strerror_r(errno, bf, sizeof(bf));
+ ui_helpline__fpush("Couldn't write to %s: %s", filename, bf);
+ return -1;
+ }
+
+ ++browser->print_seq;
+ hist_browser__fprintf(browser, fp);
+ fclose(fp);
+ ui_helpline__fpush("%s written!", filename);
+
+ return 0;
+}
+
static struct hist_browser *hist_browser__new(struct hists *hists)
{
struct hist_browser *browser = zalloc(sizeof(*browser));
@@ -937,6 +1128,9 @@
browser->selection->map->dso->annotate_warned)
continue;
goto do_annotate;
+ case 'P':
+ hist_browser__dump(browser);
+ continue;
case 'd':
goto zoom_dso;
case 't':
@@ -969,6 +1163,7 @@
"E Expand all callchains\n"
"d Zoom into current DSO\n"
"t Zoom into current Thread\n"
+ "P Print histograms to perf.hist.N\n"
"/ Filter symbol by name");
continue;
case K_ENTER:
@@ -1172,7 +1367,7 @@
struct perf_evsel *evsel = list_entry(entry, struct perf_evsel, node);
bool current_entry = ui_browser__is_current_entry(browser, row);
unsigned long nr_events = evsel->hists.stats.nr_events[PERF_RECORD_SAMPLE];
- const char *ev_name = event_name(evsel);
+ const char *ev_name = perf_evsel__name(evsel);
char bf[256], unit;
const char *warn = " ";
size_t printed;
@@ -1240,7 +1435,7 @@
*/
if (timer)
timer(arg);
- ev_name = event_name(pos);
+ ev_name = perf_evsel__name(pos);
key = perf_evsel__hists_browse(pos, nr_events, help,
ev_name, true, timer,
arg, delay_secs);
@@ -1309,17 +1504,11 @@
ui_helpline__push("Press ESC to exit");
list_for_each_entry(pos, &evlist->entries, node) {
- const char *ev_name = event_name(pos);
+ const char *ev_name = perf_evsel__name(pos);
size_t line_len = strlen(ev_name) + 7;
if (menu.b.width < line_len)
menu.b.width = line_len;
- /*
- * Cache the evsel name, tracepoints have a _high_ cost per
- * event_name() call.
- */
- if (pos->name == NULL)
- pos->name = strdup(ev_name);
}
return perf_evsel_menu__run(&menu, evlist->nr_entries, help, timer,
@@ -1330,11 +1519,10 @@
void(*timer)(void *arg), void *arg,
int delay_secs)
{
-
if (evlist->nr_entries == 1) {
struct perf_evsel *first = list_entry(evlist->entries.next,
struct perf_evsel, node);
- const char *ev_name = event_name(first);
+ const char *ev_name = perf_evsel__name(first);
return perf_evsel__hists_browse(first, evlist->nr_entries, help,
ev_name, false, timer, arg,
delay_secs);
diff --git a/tools/perf/ui/gtk/browser.c b/tools/perf/ui/gtk/browser.c
index 0656c38..ec12e0b 100644
--- a/tools/perf/ui/gtk/browser.c
+++ b/tools/perf/ui/gtk/browser.c
@@ -11,8 +11,8 @@
static void perf_gtk__signal(int sig)
{
+ perf_gtk__exit(false);
psignal(sig, "perf");
- gtk_main_quit();
}
static void perf_gtk__resize_window(GtkWidget *window)
@@ -122,13 +122,59 @@
gtk_container_add(GTK_CONTAINER(window), view);
}
+#ifdef HAVE_GTK_INFO_BAR
+static GtkWidget *perf_gtk__setup_info_bar(void)
+{
+ GtkWidget *info_bar;
+ GtkWidget *label;
+ GtkWidget *content_area;
+
+ info_bar = gtk_info_bar_new();
+ gtk_widget_set_no_show_all(info_bar, TRUE);
+
+ label = gtk_label_new("");
+ gtk_widget_show(label);
+
+ content_area = gtk_info_bar_get_content_area(GTK_INFO_BAR(info_bar));
+ gtk_container_add(GTK_CONTAINER(content_area), label);
+
+ gtk_info_bar_add_button(GTK_INFO_BAR(info_bar), GTK_STOCK_OK,
+ GTK_RESPONSE_OK);
+ g_signal_connect(info_bar, "response",
+ G_CALLBACK(gtk_widget_hide), NULL);
+
+ pgctx->info_bar = info_bar;
+ pgctx->message_label = label;
+
+ return info_bar;
+}
+#endif
+
+static GtkWidget *perf_gtk__setup_statusbar(void)
+{
+ GtkWidget *stbar;
+ unsigned ctxid;
+
+ stbar = gtk_statusbar_new();
+
+ ctxid = gtk_statusbar_get_context_id(GTK_STATUSBAR(stbar),
+ "perf report");
+ pgctx->statbar = stbar;
+ pgctx->statbar_ctx_id = ctxid;
+
+ return stbar;
+}
+
int perf_evlist__gtk_browse_hists(struct perf_evlist *evlist,
const char *help __used,
void (*timer) (void *arg)__used,
void *arg __used, int delay_secs __used)
{
struct perf_evsel *pos;
+ GtkWidget *vbox;
GtkWidget *notebook;
+ GtkWidget *info_bar;
+ GtkWidget *statbar;
GtkWidget *window;
signal(SIGSEGV, perf_gtk__signal);
@@ -143,11 +189,17 @@
g_signal_connect(window, "delete_event", gtk_main_quit, NULL);
+ pgctx = perf_gtk__activate_context(window);
+ if (!pgctx)
+ return -1;
+
+ vbox = gtk_vbox_new(FALSE, 0);
+
notebook = gtk_notebook_new();
list_for_each_entry(pos, &evlist->entries, node) {
struct hists *hists = &pos->hists;
- const char *evname = event_name(pos);
+ const char *evname = perf_evsel__name(pos);
GtkWidget *scrolled_window;
GtkWidget *tab_label;
@@ -164,7 +216,16 @@
gtk_notebook_append_page(GTK_NOTEBOOK(notebook), scrolled_window, tab_label);
}
- gtk_container_add(GTK_CONTAINER(window), notebook);
+ gtk_box_pack_start(GTK_BOX(vbox), notebook, TRUE, TRUE, 0);
+
+ info_bar = perf_gtk__setup_info_bar();
+ if (info_bar)
+ gtk_box_pack_start(GTK_BOX(vbox), info_bar, FALSE, FALSE, 0);
+
+ statbar = perf_gtk__setup_statusbar();
+ gtk_box_pack_start(GTK_BOX(vbox), statbar, FALSE, FALSE, 0);
+
+ gtk_container_add(GTK_CONTAINER(window), vbox);
gtk_widget_show_all(window);
@@ -174,5 +235,7 @@
gtk_main();
+ perf_gtk__deactivate_context(&pgctx);
+
return 0;
}
diff --git a/tools/perf/ui/gtk/gtk.h b/tools/perf/ui/gtk/gtk.h
index 75177ee..a4d0f2b 100644
--- a/tools/perf/ui/gtk/gtk.h
+++ b/tools/perf/ui/gtk/gtk.h
@@ -1,8 +1,39 @@
#ifndef _PERF_GTK_H_
#define _PERF_GTK_H_ 1
+#include <stdbool.h>
+
#pragma GCC diagnostic ignored "-Wstrict-prototypes"
#include <gtk/gtk.h>
#pragma GCC diagnostic error "-Wstrict-prototypes"
+
+struct perf_gtk_context {
+ GtkWidget *main_window;
+
+#ifdef HAVE_GTK_INFO_BAR
+ GtkWidget *info_bar;
+ GtkWidget *message_label;
+#endif
+ GtkWidget *statbar;
+ guint statbar_ctx_id;
+};
+
+extern struct perf_gtk_context *pgctx;
+
+static inline bool perf_gtk__is_active_context(struct perf_gtk_context *ctx)
+{
+ return ctx && ctx->main_window;
+}
+
+struct perf_gtk_context *perf_gtk__activate_context(GtkWidget *window);
+int perf_gtk__deactivate_context(struct perf_gtk_context **ctx);
+
+#ifndef HAVE_GTK_INFO_BAR
+static inline GtkWidget *perf_gtk__setup_info_bar(void)
+{
+ return NULL;
+}
+#endif
+
#endif /* _PERF_GTK_H_ */
diff --git a/tools/perf/ui/gtk/setup.c b/tools/perf/ui/gtk/setup.c
index 8295299..92879ce 100644
--- a/tools/perf/ui/gtk/setup.c
+++ b/tools/perf/ui/gtk/setup.c
@@ -1,12 +1,17 @@
#include "gtk.h"
#include "../../util/cache.h"
+#include "../../util/debug.h"
+
+extern struct perf_error_ops perf_gtk_eops;
int perf_gtk__init(void)
{
+ perf_error__register(&perf_gtk_eops);
return gtk_init_check(NULL, NULL) ? 0 : -1;
}
void perf_gtk__exit(bool wait_for_ok __used)
{
+ perf_error__unregister(&perf_gtk_eops);
gtk_main_quit();
}
diff --git a/tools/perf/ui/gtk/util.c b/tools/perf/ui/gtk/util.c
new file mode 100644
index 0000000..0ead373
--- /dev/null
+++ b/tools/perf/ui/gtk/util.c
@@ -0,0 +1,129 @@
+#include "../util.h"
+#include "../../util/debug.h"
+#include "gtk.h"
+
+#include <string.h>
+
+
+struct perf_gtk_context *pgctx;
+
+struct perf_gtk_context *perf_gtk__activate_context(GtkWidget *window)
+{
+ struct perf_gtk_context *ctx;
+
+ ctx = malloc(sizeof(*pgctx));
+ if (ctx)
+ ctx->main_window = window;
+
+ return ctx;
+}
+
+int perf_gtk__deactivate_context(struct perf_gtk_context **ctx)
+{
+ if (!perf_gtk__is_active_context(*ctx))
+ return -1;
+
+ free(*ctx);
+ *ctx = NULL;
+ return 0;
+}
+
+static int perf_gtk__error(const char *format, va_list args)
+{
+ char *msg;
+ GtkWidget *dialog;
+
+ if (!perf_gtk__is_active_context(pgctx) ||
+ vasprintf(&msg, format, args) < 0) {
+ fprintf(stderr, "Error:\n");
+ vfprintf(stderr, format, args);
+ fprintf(stderr, "\n");
+ return -1;
+ }
+
+ dialog = gtk_message_dialog_new_with_markup(GTK_WINDOW(pgctx->main_window),
+ GTK_DIALOG_DESTROY_WITH_PARENT,
+ GTK_MESSAGE_ERROR,
+ GTK_BUTTONS_CLOSE,
+ "<b>Error</b>\n\n%s", msg);
+ gtk_dialog_run(GTK_DIALOG(dialog));
+
+ gtk_widget_destroy(dialog);
+ free(msg);
+ return 0;
+}
+
+#ifdef HAVE_GTK_INFO_BAR
+static int perf_gtk__warning_info_bar(const char *format, va_list args)
+{
+ char *msg;
+
+ if (!perf_gtk__is_active_context(pgctx) ||
+ vasprintf(&msg, format, args) < 0) {
+ fprintf(stderr, "Warning:\n");
+ vfprintf(stderr, format, args);
+ fprintf(stderr, "\n");
+ return -1;
+ }
+
+ gtk_label_set_text(GTK_LABEL(pgctx->message_label), msg);
+ gtk_info_bar_set_message_type(GTK_INFO_BAR(pgctx->info_bar),
+ GTK_MESSAGE_WARNING);
+ gtk_widget_show(pgctx->info_bar);
+
+ free(msg);
+ return 0;
+}
+#else
+static int perf_gtk__warning_statusbar(const char *format, va_list args)
+{
+ char *msg, *p;
+
+ if (!perf_gtk__is_active_context(pgctx) ||
+ vasprintf(&msg, format, args) < 0) {
+ fprintf(stderr, "Warning:\n");
+ vfprintf(stderr, format, args);
+ fprintf(stderr, "\n");
+ return -1;
+ }
+
+ gtk_statusbar_pop(GTK_STATUSBAR(pgctx->statbar),
+ pgctx->statbar_ctx_id);
+
+ /* Only first line can be displayed */
+ p = strchr(msg, '\n');
+ if (p)
+ *p = '\0';
+
+ gtk_statusbar_push(GTK_STATUSBAR(pgctx->statbar),
+ pgctx->statbar_ctx_id, msg);
+
+ free(msg);
+ return 0;
+}
+#endif
+
+struct perf_error_ops perf_gtk_eops = {
+ .error = perf_gtk__error,
+#ifdef HAVE_GTK_INFO_BAR
+ .warning = perf_gtk__warning_info_bar,
+#else
+ .warning = perf_gtk__warning_statusbar,
+#endif
+};
+
+/*
+ * FIXME: Functions below should be implemented properly.
+ * For now, just add stubs for NO_NEWT=1 build.
+ */
+#ifdef NO_NEWT_SUPPORT
+int ui_helpline__show_help(const char *format __used, va_list ap __used)
+{
+ return 0;
+}
+
+void ui_progress__update(u64 curr __used, u64 total __used,
+ const char *title __used)
+{
+}
+#endif
diff --git a/tools/perf/ui/tui/setup.c b/tools/perf/ui/tui/setup.c
index d33e943..e813c1d 100644
--- a/tools/perf/ui/tui/setup.c
+++ b/tools/perf/ui/tui/setup.c
@@ -15,6 +15,8 @@
static volatile int ui__need_resize;
+extern struct perf_error_ops perf_tui_eops;
+
void ui__refresh_dimensions(bool force)
{
if (force || ui__need_resize) {
@@ -122,6 +124,8 @@
signal(SIGINT, ui__signal);
signal(SIGQUIT, ui__signal);
signal(SIGTERM, ui__signal);
+
+ perf_error__register(&perf_tui_eops);
out:
return err;
}
@@ -137,4 +141,6 @@
SLsmg_refresh();
SLsmg_reset_smg();
SLang_reset_tty();
+
+ perf_error__unregister(&perf_tui_eops);
}
diff --git a/tools/perf/ui/tui/util.c b/tools/perf/ui/tui/util.c
new file mode 100644
index 0000000..092902e
--- /dev/null
+++ b/tools/perf/ui/tui/util.c
@@ -0,0 +1,243 @@
+#include "../../util/util.h"
+#include <signal.h>
+#include <stdbool.h>
+#include <string.h>
+#include <sys/ttydefaults.h>
+
+#include "../../util/cache.h"
+#include "../../util/debug.h"
+#include "../browser.h"
+#include "../keysyms.h"
+#include "../helpline.h"
+#include "../ui.h"
+#include "../util.h"
+#include "../libslang.h"
+
+static void ui_browser__argv_write(struct ui_browser *browser,
+ void *entry, int row)
+{
+ char **arg = entry;
+ bool current_entry = ui_browser__is_current_entry(browser, row);
+
+ ui_browser__set_color(browser, current_entry ? HE_COLORSET_SELECTED :
+ HE_COLORSET_NORMAL);
+ slsmg_write_nstring(*arg, browser->width);
+}
+
+static int popup_menu__run(struct ui_browser *menu)
+{
+ int key;
+
+ if (ui_browser__show(menu, " ", "ESC: exit, ENTER|->: Select option") < 0)
+ return -1;
+
+ while (1) {
+ key = ui_browser__run(menu, 0);
+
+ switch (key) {
+ case K_RIGHT:
+ case K_ENTER:
+ key = menu->index;
+ break;
+ case K_LEFT:
+ case K_ESC:
+ case 'q':
+ case CTRL('c'):
+ key = -1;
+ break;
+ default:
+ continue;
+ }
+
+ break;
+ }
+
+ ui_browser__hide(menu);
+ return key;
+}
+
+int ui__popup_menu(int argc, char * const argv[])
+{
+ struct ui_browser menu = {
+ .entries = (void *)argv,
+ .refresh = ui_browser__argv_refresh,
+ .seek = ui_browser__argv_seek,
+ .write = ui_browser__argv_write,
+ .nr_entries = argc,
+ };
+
+ return popup_menu__run(&menu);
+}
+
+int ui_browser__input_window(const char *title, const char *text, char *input,
+ const char *exit_msg, int delay_secs)
+{
+ int x, y, len, key;
+ int max_len = 60, nr_lines = 0;
+ static char buf[50];
+ const char *t;
+
+ t = text;
+ while (1) {
+ const char *sep = strchr(t, '\n');
+
+ if (sep == NULL)
+ sep = strchr(t, '\0');
+ len = sep - t;
+ if (max_len < len)
+ max_len = len;
+ ++nr_lines;
+ if (*sep == '\0')
+ break;
+ t = sep + 1;
+ }
+
+ max_len += 2;
+ nr_lines += 8;
+ y = SLtt_Screen_Rows / 2 - nr_lines / 2;
+ x = SLtt_Screen_Cols / 2 - max_len / 2;
+
+ SLsmg_set_color(0);
+ SLsmg_draw_box(y, x++, nr_lines, max_len);
+ if (title) {
+ SLsmg_gotorc(y, x + 1);
+ SLsmg_write_string((char *)title);
+ }
+ SLsmg_gotorc(++y, x);
+ nr_lines -= 7;
+ max_len -= 2;
+ SLsmg_write_wrapped_string((unsigned char *)text, y, x,
+ nr_lines, max_len, 1);
+ y += nr_lines;
+ len = 5;
+ while (len--) {
+ SLsmg_gotorc(y + len - 1, x);
+ SLsmg_write_nstring((char *)" ", max_len);
+ }
+ SLsmg_draw_box(y++, x + 1, 3, max_len - 2);
+
+ SLsmg_gotorc(y + 3, x);
+ SLsmg_write_nstring((char *)exit_msg, max_len);
+ SLsmg_refresh();
+
+ x += 2;
+ len = 0;
+ key = ui__getch(delay_secs);
+ while (key != K_TIMER && key != K_ENTER && key != K_ESC) {
+ if (key == K_BKSPC) {
+ if (len == 0)
+ goto next_key;
+ SLsmg_gotorc(y, x + --len);
+ SLsmg_write_char(' ');
+ } else {
+ buf[len] = key;
+ SLsmg_gotorc(y, x + len++);
+ SLsmg_write_char(key);
+ }
+ SLsmg_refresh();
+
+ /* XXX more graceful overflow handling needed */
+ if (len == sizeof(buf) - 1) {
+ ui_helpline__push("maximum size of symbol name reached!");
+ key = K_ENTER;
+ break;
+ }
+next_key:
+ key = ui__getch(delay_secs);
+ }
+
+ buf[len] = '\0';
+ strncpy(input, buf, len+1);
+ return key;
+}
+
+int ui__question_window(const char *title, const char *text,
+ const char *exit_msg, int delay_secs)
+{
+ int x, y;
+ int max_len = 0, nr_lines = 0;
+ const char *t;
+
+ t = text;
+ while (1) {
+ const char *sep = strchr(t, '\n');
+ int len;
+
+ if (sep == NULL)
+ sep = strchr(t, '\0');
+ len = sep - t;
+ if (max_len < len)
+ max_len = len;
+ ++nr_lines;
+ if (*sep == '\0')
+ break;
+ t = sep + 1;
+ }
+
+ max_len += 2;
+ nr_lines += 4;
+ y = SLtt_Screen_Rows / 2 - nr_lines / 2,
+ x = SLtt_Screen_Cols / 2 - max_len / 2;
+
+ SLsmg_set_color(0);
+ SLsmg_draw_box(y, x++, nr_lines, max_len);
+ if (title) {
+ SLsmg_gotorc(y, x + 1);
+ SLsmg_write_string((char *)title);
+ }
+ SLsmg_gotorc(++y, x);
+ nr_lines -= 2;
+ max_len -= 2;
+ SLsmg_write_wrapped_string((unsigned char *)text, y, x,
+ nr_lines, max_len, 1);
+ SLsmg_gotorc(y + nr_lines - 2, x);
+ SLsmg_write_nstring((char *)" ", max_len);
+ SLsmg_gotorc(y + nr_lines - 1, x);
+ SLsmg_write_nstring((char *)exit_msg, max_len);
+ SLsmg_refresh();
+ return ui__getch(delay_secs);
+}
+
+int ui__help_window(const char *text)
+{
+ return ui__question_window("Help", text, "Press any key...", 0);
+}
+
+int ui__dialog_yesno(const char *msg)
+{
+ return ui__question_window(NULL, msg, "Enter: Yes, ESC: No", 0);
+}
+
+static int __ui__warning(const char *title, const char *format, va_list args)
+{
+ char *s;
+
+ if (vasprintf(&s, format, args) > 0) {
+ int key;
+
+ pthread_mutex_lock(&ui__lock);
+ key = ui__question_window(title, s, "Press any key...", 0);
+ pthread_mutex_unlock(&ui__lock);
+ free(s);
+ return key;
+ }
+
+ fprintf(stderr, "%s\n", title);
+ vfprintf(stderr, format, args);
+ return K_ESC;
+}
+
+static int perf_tui__error(const char *format, va_list args)
+{
+ return __ui__warning("Error:", format, args);
+}
+
+static int perf_tui__warning(const char *format, va_list args)
+{
+ return __ui__warning("Warning:", format, args);
+}
+
+struct perf_error_ops perf_tui_eops = {
+ .error = perf_tui__error,
+ .warning = perf_tui__warning,
+};
diff --git a/tools/perf/ui/util.c b/tools/perf/ui/util.c
index ad4374a..4f98977 100644
--- a/tools/perf/ui/util.c
+++ b/tools/perf/ui/util.c
@@ -1,250 +1,85 @@
-#include "../util.h"
-#include <signal.h>
-#include <stdbool.h>
-#include <string.h>
-#include <sys/ttydefaults.h>
-
-#include "../cache.h"
-#include "../debug.h"
-#include "browser.h"
-#include "keysyms.h"
-#include "helpline.h"
-#include "ui.h"
#include "util.h"
-#include "libslang.h"
+#include "../debug.h"
-static void ui_browser__argv_write(struct ui_browser *browser,
- void *entry, int row)
+
+/*
+ * Default error logging functions
+ */
+static int perf_stdio__error(const char *format, va_list args)
{
- char **arg = entry;
- bool current_entry = ui_browser__is_current_entry(browser, row);
-
- ui_browser__set_color(browser, current_entry ? HE_COLORSET_SELECTED :
- HE_COLORSET_NORMAL);
- slsmg_write_nstring(*arg, browser->width);
-}
-
-static int popup_menu__run(struct ui_browser *menu)
-{
- int key;
-
- if (ui_browser__show(menu, " ", "ESC: exit, ENTER|->: Select option") < 0)
- return -1;
-
- while (1) {
- key = ui_browser__run(menu, 0);
-
- switch (key) {
- case K_RIGHT:
- case K_ENTER:
- key = menu->index;
- break;
- case K_LEFT:
- case K_ESC:
- case 'q':
- case CTRL('c'):
- key = -1;
- break;
- default:
- continue;
- }
-
- break;
- }
-
- ui_browser__hide(menu);
- return key;
-}
-
-int ui__popup_menu(int argc, char * const argv[])
-{
- struct ui_browser menu = {
- .entries = (void *)argv,
- .refresh = ui_browser__argv_refresh,
- .seek = ui_browser__argv_seek,
- .write = ui_browser__argv_write,
- .nr_entries = argc,
- };
-
- return popup_menu__run(&menu);
-}
-
-int ui_browser__input_window(const char *title, const char *text, char *input,
- const char *exit_msg, int delay_secs)
-{
- int x, y, len, key;
- int max_len = 60, nr_lines = 0;
- static char buf[50];
- const char *t;
-
- t = text;
- while (1) {
- const char *sep = strchr(t, '\n');
-
- if (sep == NULL)
- sep = strchr(t, '\0');
- len = sep - t;
- if (max_len < len)
- max_len = len;
- ++nr_lines;
- if (*sep == '\0')
- break;
- t = sep + 1;
- }
-
- max_len += 2;
- nr_lines += 8;
- y = SLtt_Screen_Rows / 2 - nr_lines / 2;
- x = SLtt_Screen_Cols / 2 - max_len / 2;
-
- SLsmg_set_color(0);
- SLsmg_draw_box(y, x++, nr_lines, max_len);
- if (title) {
- SLsmg_gotorc(y, x + 1);
- SLsmg_write_string((char *)title);
- }
- SLsmg_gotorc(++y, x);
- nr_lines -= 7;
- max_len -= 2;
- SLsmg_write_wrapped_string((unsigned char *)text, y, x,
- nr_lines, max_len, 1);
- y += nr_lines;
- len = 5;
- while (len--) {
- SLsmg_gotorc(y + len - 1, x);
- SLsmg_write_nstring((char *)" ", max_len);
- }
- SLsmg_draw_box(y++, x + 1, 3, max_len - 2);
-
- SLsmg_gotorc(y + 3, x);
- SLsmg_write_nstring((char *)exit_msg, max_len);
- SLsmg_refresh();
-
- x += 2;
- len = 0;
- key = ui__getch(delay_secs);
- while (key != K_TIMER && key != K_ENTER && key != K_ESC) {
- if (key == K_BKSPC) {
- if (len == 0)
- goto next_key;
- SLsmg_gotorc(y, x + --len);
- SLsmg_write_char(' ');
- } else {
- buf[len] = key;
- SLsmg_gotorc(y, x + len++);
- SLsmg_write_char(key);
- }
- SLsmg_refresh();
-
- /* XXX more graceful overflow handling needed */
- if (len == sizeof(buf) - 1) {
- ui_helpline__push("maximum size of symbol name reached!");
- key = K_ENTER;
- break;
- }
-next_key:
- key = ui__getch(delay_secs);
- }
-
- buf[len] = '\0';
- strncpy(input, buf, len+1);
- return key;
-}
-
-int ui__question_window(const char *title, const char *text,
- const char *exit_msg, int delay_secs)
-{
- int x, y;
- int max_len = 0, nr_lines = 0;
- const char *t;
-
- t = text;
- while (1) {
- const char *sep = strchr(t, '\n');
- int len;
-
- if (sep == NULL)
- sep = strchr(t, '\0');
- len = sep - t;
- if (max_len < len)
- max_len = len;
- ++nr_lines;
- if (*sep == '\0')
- break;
- t = sep + 1;
- }
-
- max_len += 2;
- nr_lines += 4;
- y = SLtt_Screen_Rows / 2 - nr_lines / 2,
- x = SLtt_Screen_Cols / 2 - max_len / 2;
-
- SLsmg_set_color(0);
- SLsmg_draw_box(y, x++, nr_lines, max_len);
- if (title) {
- SLsmg_gotorc(y, x + 1);
- SLsmg_write_string((char *)title);
- }
- SLsmg_gotorc(++y, x);
- nr_lines -= 2;
- max_len -= 2;
- SLsmg_write_wrapped_string((unsigned char *)text, y, x,
- nr_lines, max_len, 1);
- SLsmg_gotorc(y + nr_lines - 2, x);
- SLsmg_write_nstring((char *)" ", max_len);
- SLsmg_gotorc(y + nr_lines - 1, x);
- SLsmg_write_nstring((char *)exit_msg, max_len);
- SLsmg_refresh();
- return ui__getch(delay_secs);
-}
-
-int ui__help_window(const char *text)
-{
- return ui__question_window("Help", text, "Press any key...", 0);
-}
-
-int ui__dialog_yesno(const char *msg)
-{
- return ui__question_window(NULL, msg, "Enter: Yes, ESC: No", 0);
-}
-
-int __ui__warning(const char *title, const char *format, va_list args)
-{
- char *s;
-
- if (use_browser > 0 && vasprintf(&s, format, args) > 0) {
- int key;
-
- pthread_mutex_lock(&ui__lock);
- key = ui__question_window(title, s, "Press any key...", 0);
- pthread_mutex_unlock(&ui__lock);
- free(s);
- return key;
- }
-
- fprintf(stderr, "%s:\n", title);
+ fprintf(stderr, "Error:\n");
vfprintf(stderr, format, args);
- return K_ESC;
+ return 0;
+}
+
+static int perf_stdio__warning(const char *format, va_list args)
+{
+ fprintf(stderr, "Warning:\n");
+ vfprintf(stderr, format, args);
+ return 0;
+}
+
+static struct perf_error_ops default_eops =
+{
+ .error = perf_stdio__error,
+ .warning = perf_stdio__warning,
+};
+
+static struct perf_error_ops *perf_eops = &default_eops;
+
+
+int ui__error(const char *format, ...)
+{
+ int ret;
+ va_list args;
+
+ va_start(args, format);
+ ret = perf_eops->error(format, args);
+ va_end(args);
+
+ return ret;
}
int ui__warning(const char *format, ...)
{
- int key;
+ int ret;
va_list args;
va_start(args, format);
- key = __ui__warning("Warning", format, args);
+ ret = perf_eops->warning(format, args);
va_end(args);
- return key;
+
+ return ret;
}
-int ui__error(const char *format, ...)
-{
- int key;
- va_list args;
- va_start(args, format);
- key = __ui__warning("Error", format, args);
- va_end(args);
- return key;
+/**
+ * perf_error__register - Register error logging functions
+ * @eops: The pointer to error logging function struct
+ *
+ * Register UI-specific error logging functions. Before calling this,
+ * other logging functions should be unregistered, if any.
+ */
+int perf_error__register(struct perf_error_ops *eops)
+{
+ if (perf_eops != &default_eops)
+ return -1;
+
+ perf_eops = eops;
+ return 0;
+}
+
+/**
+ * perf_error__unregister - Unregister error logging functions
+ * @eops: The pointer to error logging function struct
+ *
+ * Unregister already registered error logging functions.
+ */
+int perf_error__unregister(struct perf_error_ops *eops)
+{
+ if (perf_eops != eops)
+ return -1;
+
+ perf_eops = &default_eops;
+ return 0;
}
diff --git a/tools/perf/ui/util.h b/tools/perf/ui/util.h
index 2d1738b..361f08c 100644
--- a/tools/perf/ui/util.h
+++ b/tools/perf/ui/util.h
@@ -9,6 +9,13 @@
int ui__dialog_yesno(const char *msg);
int ui__question_window(const char *title, const char *text,
const char *exit_msg, int delay_secs);
-int __ui__warning(const char *title, const char *format, va_list args);
+
+struct perf_error_ops {
+ int (*error)(const char *format, va_list args);
+ int (*warning)(const char *format, va_list args);
+};
+
+int perf_error__register(struct perf_error_ops *eops);
+int perf_error__unregister(struct perf_error_ops *eops);
#endif /* _PERF_UI_UTIL_H_ */
diff --git a/tools/perf/util/debug.c b/tools/perf/util/debug.c
index efb1fce..4dfe0bb 100644
--- a/tools/perf/util/debug.c
+++ b/tools/perf/util/debug.c
@@ -47,7 +47,7 @@
return ret;
}
-#ifdef NO_NEWT_SUPPORT
+#if defined(NO_NEWT_SUPPORT) && defined(NO_GTK2_SUPPORT)
int ui__warning(const char *format, ...)
{
va_list args;
diff --git a/tools/perf/util/debug.h b/tools/perf/util/debug.h
index 6bebe7f..015c91d 100644
--- a/tools/perf/util/debug.h
+++ b/tools/perf/util/debug.h
@@ -12,8 +12,9 @@
void trace_event(union perf_event *event);
struct ui_progress;
+struct perf_error_ops;
-#ifdef NO_NEWT_SUPPORT
+#if defined(NO_NEWT_SUPPORT) && defined(NO_GTK2_SUPPORT)
static inline int ui_helpline__show_help(const char *format __used, va_list ap __used)
{
return 0;
@@ -23,12 +24,28 @@
const char *title __used) {}
#define ui__error(format, arg...) ui__warning(format, ##arg)
-#else
+
+static inline int
+perf_error__register(struct perf_error_ops *eops __used)
+{
+ return 0;
+}
+
+static inline int
+perf_error__unregister(struct perf_error_ops *eops __used)
+{
+ return 0;
+}
+
+#else /* NO_NEWT_SUPPORT && NO_GTK2_SUPPORT */
+
extern char ui_helpline__last_msg[];
int ui_helpline__show_help(const char *format, va_list ap);
#include "../ui/progress.h"
int ui__error(const char *format, ...) __attribute__((format(printf, 1, 2)));
-#endif
+#include "../ui/util.h"
+
+#endif /* NO_NEWT_SUPPORT && NO_GTK2_SUPPORT */
int ui__warning(const char *format, ...) __attribute__((format(printf, 1, 2)));
int ui__error_paranoid(void);
diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index 7400fb3..f74e956 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -224,8 +224,8 @@
return err;
}
-static struct perf_evsel *
- perf_evlist__find_tracepoint_by_id(struct perf_evlist *evlist, int id)
+struct perf_evsel *
+perf_evlist__find_tracepoint_by_id(struct perf_evlist *evlist, int id)
{
struct perf_evsel *evsel;
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index 989bee9..40d4d3c 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -73,6 +73,9 @@
#define perf_evlist__set_tracepoints_handlers_array(evlist, array) \
perf_evlist__set_tracepoints_handlers(evlist, array, ARRAY_SIZE(array))
+struct perf_evsel *
+perf_evlist__find_tracepoint_by_id(struct perf_evlist *evlist, int id);
+
void perf_evlist__id_add(struct perf_evlist *evlist, struct perf_evsel *evsel,
int cpu, int thread, u64 id);
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index 9f6cebd..e817713 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -15,7 +15,7 @@
#include "cpumap.h"
#include "thread_map.h"
#include "target.h"
-#include "../../include/linux/perf_event.h"
+#include "../../../include/linux/hw_breakpoint.h"
#define FD(e, x, y) (*(int *)xyarray__entry(e->fd, x, y))
#define GROUP_FD(group_fd, cpu) (*(int *)xyarray__entry(group_fd, cpu, 0))
@@ -78,7 +78,7 @@
"ref-cycles",
};
-const char *__perf_evsel__hw_name(u64 config)
+static const char *__perf_evsel__hw_name(u64 config)
{
if (config < PERF_COUNT_HW_MAX && perf_evsel__hw_names[config])
return perf_evsel__hw_names[config];
@@ -86,16 +86,15 @@
return "unknown-hardware";
}
-static int perf_evsel__hw_name(struct perf_evsel *evsel, char *bf, size_t size)
+static int perf_evsel__add_modifiers(struct perf_evsel *evsel, char *bf, size_t size)
{
- int colon = 0;
+ int colon = 0, r = 0;
struct perf_event_attr *attr = &evsel->attr;
- int r = scnprintf(bf, size, "%s", __perf_evsel__hw_name(attr->config));
bool exclude_guest_default = false;
#define MOD_PRINT(context, mod) do { \
if (!attr->exclude_##context) { \
- if (!colon) colon = r++; \
+ if (!colon) colon = ++r; \
r += scnprintf(bf + r, size - r, "%c", mod); \
} } while(0)
@@ -108,7 +107,7 @@
if (attr->precise_ip) {
if (!colon)
- colon = r++;
+ colon = ++r;
r += scnprintf(bf + r, size - r, "%.*s", attr->precise_ip, "ppp");
exclude_guest_default = true;
}
@@ -119,39 +118,211 @@
}
#undef MOD_PRINT
if (colon)
- bf[colon] = ':';
+ bf[colon - 1] = ':';
return r;
}
-int perf_evsel__name(struct perf_evsel *evsel, char *bf, size_t size)
+static int perf_evsel__hw_name(struct perf_evsel *evsel, char *bf, size_t size)
{
- int ret;
+ int r = scnprintf(bf, size, "%s", __perf_evsel__hw_name(evsel->attr.config));
+ return r + perf_evsel__add_modifiers(evsel, bf + r, size - r);
+}
+
+static const char *perf_evsel__sw_names[PERF_COUNT_SW_MAX] = {
+ "cpu-clock",
+ "task-clock",
+ "page-faults",
+ "context-switches",
+ "CPU-migrations",
+ "minor-faults",
+ "major-faults",
+ "alignment-faults",
+ "emulation-faults",
+};
+
+static const char *__perf_evsel__sw_name(u64 config)
+{
+ if (config < PERF_COUNT_SW_MAX && perf_evsel__sw_names[config])
+ return perf_evsel__sw_names[config];
+ return "unknown-software";
+}
+
+static int perf_evsel__sw_name(struct perf_evsel *evsel, char *bf, size_t size)
+{
+ int r = scnprintf(bf, size, "%s", __perf_evsel__sw_name(evsel->attr.config));
+ return r + perf_evsel__add_modifiers(evsel, bf + r, size - r);
+}
+
+static int __perf_evsel__bp_name(char *bf, size_t size, u64 addr, u64 type)
+{
+ int r;
+
+ r = scnprintf(bf, size, "mem:0x%" PRIx64 ":", addr);
+
+ if (type & HW_BREAKPOINT_R)
+ r += scnprintf(bf + r, size - r, "r");
+
+ if (type & HW_BREAKPOINT_W)
+ r += scnprintf(bf + r, size - r, "w");
+
+ if (type & HW_BREAKPOINT_X)
+ r += scnprintf(bf + r, size - r, "x");
+
+ return r;
+}
+
+static int perf_evsel__bp_name(struct perf_evsel *evsel, char *bf, size_t size)
+{
+ struct perf_event_attr *attr = &evsel->attr;
+ int r = __perf_evsel__bp_name(bf, size, attr->bp_addr, attr->bp_type);
+ return r + perf_evsel__add_modifiers(evsel, bf + r, size - r);
+}
+
+const char *perf_evsel__hw_cache[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_EVSEL__MAX_ALIASES] = {
+ { "L1-dcache", "l1-d", "l1d", "L1-data", },
+ { "L1-icache", "l1-i", "l1i", "L1-instruction", },
+ { "LLC", "L2", },
+ { "dTLB", "d-tlb", "Data-TLB", },
+ { "iTLB", "i-tlb", "Instruction-TLB", },
+ { "branch", "branches", "bpu", "btb", "bpc", },
+ { "node", },
+};
+
+const char *perf_evsel__hw_cache_op[PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_EVSEL__MAX_ALIASES] = {
+ { "load", "loads", "read", },
+ { "store", "stores", "write", },
+ { "prefetch", "prefetches", "speculative-read", "speculative-load", },
+};
+
+const char *perf_evsel__hw_cache_result[PERF_COUNT_HW_CACHE_RESULT_MAX]
+ [PERF_EVSEL__MAX_ALIASES] = {
+ { "refs", "Reference", "ops", "access", },
+ { "misses", "miss", },
+};
+
+#define C(x) PERF_COUNT_HW_CACHE_##x
+#define CACHE_READ (1 << C(OP_READ))
+#define CACHE_WRITE (1 << C(OP_WRITE))
+#define CACHE_PREFETCH (1 << C(OP_PREFETCH))
+#define COP(x) (1 << x)
+
+/*
+ * cache operartion stat
+ * L1I : Read and prefetch only
+ * ITLB and BPU : Read-only
+ */
+static unsigned long perf_evsel__hw_cache_stat[C(MAX)] = {
+ [C(L1D)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
+ [C(L1I)] = (CACHE_READ | CACHE_PREFETCH),
+ [C(LL)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
+ [C(DTLB)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
+ [C(ITLB)] = (CACHE_READ),
+ [C(BPU)] = (CACHE_READ),
+ [C(NODE)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
+};
+
+bool perf_evsel__is_cache_op_valid(u8 type, u8 op)
+{
+ if (perf_evsel__hw_cache_stat[type] & COP(op))
+ return true; /* valid */
+ else
+ return false; /* invalid */
+}
+
+int __perf_evsel__hw_cache_type_op_res_name(u8 type, u8 op, u8 result,
+ char *bf, size_t size)
+{
+ if (result) {
+ return scnprintf(bf, size, "%s-%s-%s", perf_evsel__hw_cache[type][0],
+ perf_evsel__hw_cache_op[op][0],
+ perf_evsel__hw_cache_result[result][0]);
+ }
+
+ return scnprintf(bf, size, "%s-%s", perf_evsel__hw_cache[type][0],
+ perf_evsel__hw_cache_op[op][1]);
+}
+
+static int __perf_evsel__hw_cache_name(u64 config, char *bf, size_t size)
+{
+ u8 op, result, type = (config >> 0) & 0xff;
+ const char *err = "unknown-ext-hardware-cache-type";
+
+ if (type > PERF_COUNT_HW_CACHE_MAX)
+ goto out_err;
+
+ op = (config >> 8) & 0xff;
+ err = "unknown-ext-hardware-cache-op";
+ if (op > PERF_COUNT_HW_CACHE_OP_MAX)
+ goto out_err;
+
+ result = (config >> 16) & 0xff;
+ err = "unknown-ext-hardware-cache-result";
+ if (result > PERF_COUNT_HW_CACHE_RESULT_MAX)
+ goto out_err;
+
+ err = "invalid-cache";
+ if (!perf_evsel__is_cache_op_valid(type, op))
+ goto out_err;
+
+ return __perf_evsel__hw_cache_type_op_res_name(type, op, result, bf, size);
+out_err:
+ return scnprintf(bf, size, "%s", err);
+}
+
+static int perf_evsel__hw_cache_name(struct perf_evsel *evsel, char *bf, size_t size)
+{
+ int ret = __perf_evsel__hw_cache_name(evsel->attr.config, bf, size);
+ return ret + perf_evsel__add_modifiers(evsel, bf + ret, size - ret);
+}
+
+static int perf_evsel__raw_name(struct perf_evsel *evsel, char *bf, size_t size)
+{
+ int ret = scnprintf(bf, size, "raw 0x%" PRIx64, evsel->attr.config);
+ return ret + perf_evsel__add_modifiers(evsel, bf + ret, size - ret);
+}
+
+const char *perf_evsel__name(struct perf_evsel *evsel)
+{
+ char bf[128];
+
+ if (evsel->name)
+ return evsel->name;
switch (evsel->attr.type) {
case PERF_TYPE_RAW:
- ret = scnprintf(bf, size, "raw 0x%" PRIx64, evsel->attr.config);
+ perf_evsel__raw_name(evsel, bf, sizeof(bf));
break;
case PERF_TYPE_HARDWARE:
- ret = perf_evsel__hw_name(evsel, bf, size);
+ perf_evsel__hw_name(evsel, bf, sizeof(bf));
break;
+
+ case PERF_TYPE_HW_CACHE:
+ perf_evsel__hw_cache_name(evsel, bf, sizeof(bf));
+ break;
+
+ case PERF_TYPE_SOFTWARE:
+ perf_evsel__sw_name(evsel, bf, sizeof(bf));
+ break;
+
+ case PERF_TYPE_TRACEPOINT:
+ scnprintf(bf, sizeof(bf), "%s", "unknown tracepoint");
+ break;
+
+ case PERF_TYPE_BREAKPOINT:
+ perf_evsel__bp_name(evsel, bf, sizeof(bf));
+ break;
+
default:
- /*
- * FIXME
- *
- * This is the minimal perf_evsel__name so that we can
- * reconstruct event names taking into account event modifiers.
- *
- * The old event_name uses it now for raw anr hw events, so that
- * we don't drag all the parsing stuff into the python binding.
- *
- * On the next devel cycle the rest of the event naming will be
- * brought here.
- */
- return 0;
+ scnprintf(bf, sizeof(bf), "%s", "unknown attr type");
+ break;
}
- return ret;
+ evsel->name = strdup(bf);
+
+ return evsel->name ?: "unknown";
}
void perf_evsel__config(struct perf_evsel *evsel, struct perf_record_opts *opts,
diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
index 4ba8b56..67cc503 100644
--- a/tools/perf/util/evsel.h
+++ b/tools/perf/util/evsel.h
@@ -83,8 +83,19 @@
struct perf_record_opts *opts,
struct perf_evsel *first);
-const char* __perf_evsel__hw_name(u64 config);
-int perf_evsel__name(struct perf_evsel *evsel, char *bf, size_t size);
+bool perf_evsel__is_cache_op_valid(u8 type, u8 op);
+
+#define PERF_EVSEL__MAX_ALIASES 8
+
+extern const char *perf_evsel__hw_cache[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_EVSEL__MAX_ALIASES];
+extern const char *perf_evsel__hw_cache_op[PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_EVSEL__MAX_ALIASES];
+const char *perf_evsel__hw_cache_result[PERF_COUNT_HW_CACHE_RESULT_MAX]
+ [PERF_EVSEL__MAX_ALIASES];
+int __perf_evsel__hw_cache_type_op_res_name(u8 type, u8 op, u8 result,
+ char *bf, size_t size);
+const char *perf_evsel__name(struct perf_evsel *evsel);
int perf_evsel__alloc_fd(struct perf_evsel *evsel, int ncpus, int nthreads);
int perf_evsel__alloc_id(struct perf_evsel *evsel, int ncpus, int nthreads);
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index 2dd5edf..5a47aba 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -641,7 +641,7 @@
/*
* write event string as passed on cmdline
*/
- ret = do_write_string(fd, event_name(attr));
+ ret = do_write_string(fd, perf_evsel__name(attr));
if (ret < 0)
return ret;
/*
@@ -1474,15 +1474,15 @@
static int process_tracing_data(struct perf_file_section *section __unused,
struct perf_header *ph __unused,
- int feat __unused, int fd)
+ int feat __unused, int fd, void *data)
{
- trace_report(fd, false);
+ trace_report(fd, data, false);
return 0;
}
static int process_build_id(struct perf_file_section *section,
struct perf_header *ph,
- int feat __unused, int fd)
+ int feat __unused, int fd, void *data __used)
{
if (perf_header__read_build_ids(ph, fd, section->offset, section->size))
pr_debug("Failed to read buildids, continuing...\n");
@@ -1493,7 +1493,7 @@
int (*write)(int fd, struct perf_header *h, struct perf_evlist *evlist);
void (*print)(struct perf_header *h, int fd, FILE *fp);
int (*process)(struct perf_file_section *section,
- struct perf_header *h, int feat, int fd);
+ struct perf_header *h, int feat, int fd, void *data);
const char *name;
bool full_only;
};
@@ -1942,7 +1942,6 @@
else
return -1;
} else if (ph->needs_swap) {
- unsigned int i;
/*
* feature bitmap is declared as an array of unsigned longs --
* not good since its size can differ between the host that
@@ -1958,14 +1957,17 @@
* file), punt and fallback to the original behavior --
* clearing all feature bits and setting buildid.
*/
- for (i = 0; i < BITS_TO_LONGS(HEADER_FEAT_BITS); ++i)
- header->adds_features[i] = bswap_64(header->adds_features[i]);
+ mem_bswap_64(&header->adds_features,
+ BITS_TO_U64(HEADER_FEAT_BITS));
if (!test_bit(HEADER_HOSTNAME, header->adds_features)) {
- for (i = 0; i < BITS_TO_LONGS(HEADER_FEAT_BITS); ++i) {
- header->adds_features[i] = bswap_64(header->adds_features[i]);
- header->adds_features[i] = bswap_32(header->adds_features[i]);
- }
+ /* unswap as u64 */
+ mem_bswap_64(&header->adds_features,
+ BITS_TO_U64(HEADER_FEAT_BITS));
+
+ /* unswap as u32 */
+ mem_bswap_32(&header->adds_features,
+ BITS_TO_U32(HEADER_FEAT_BITS));
}
if (!test_bit(HEADER_HOSTNAME, header->adds_features)) {
@@ -1986,7 +1988,7 @@
static int perf_file_section__process(struct perf_file_section *section,
struct perf_header *ph,
- int feat, int fd, void *data __used)
+ int feat, int fd, void *data)
{
if (lseek(fd, section->offset, SEEK_SET) == (off_t)-1) {
pr_debug("Failed to lseek to %" PRIu64 " offset for feature "
@@ -2002,7 +2004,7 @@
if (!feat_ops[feat].process)
return 0;
- return feat_ops[feat].process(section, ph, feat, fd);
+ return feat_ops[feat].process(section, ph, feat, fd, data);
}
static int perf_file_header__read_pipe(struct perf_pipe_file_header *header,
@@ -2091,6 +2093,38 @@
return ret <= 0 ? -1 : 0;
}
+static int perf_evsel__set_tracepoint_name(struct perf_evsel *evsel,
+ struct pevent *pevent)
+{
+ struct event_format *event = pevent_find_event(pevent,
+ evsel->attr.config);
+ char bf[128];
+
+ if (event == NULL)
+ return -1;
+
+ snprintf(bf, sizeof(bf), "%s:%s", event->system, event->name);
+ evsel->name = strdup(bf);
+ if (event->name == NULL)
+ return -1;
+
+ return 0;
+}
+
+static int perf_evlist__set_tracepoint_names(struct perf_evlist *evlist,
+ struct pevent *pevent)
+{
+ struct perf_evsel *pos;
+
+ list_for_each_entry(pos, &evlist->entries, node) {
+ if (pos->attr.type == PERF_TYPE_TRACEPOINT &&
+ perf_evsel__set_tracepoint_name(pos, pevent))
+ return -1;
+ }
+
+ return 0;
+}
+
int perf_session__read_header(struct perf_session *session, int fd)
{
struct perf_header *header = &session->header;
@@ -2167,11 +2201,14 @@
event_count = f_header.event_types.size / sizeof(struct perf_trace_event_type);
}
- perf_header__process_sections(header, fd, NULL,
+ perf_header__process_sections(header, fd, &session->pevent,
perf_file_section__process);
lseek(fd, header->data_offset, SEEK_SET);
+ if (perf_evlist__set_tracepoint_names(session->evlist, session->pevent))
+ goto out_delete_evlist;
+
header->frozen = 1;
return 0;
out_errno:
@@ -2385,8 +2422,8 @@
lseek(session->fd, offset + sizeof(struct tracing_data_event),
SEEK_SET);
- size_read = trace_report(session->fd, session->repipe);
-
+ size_read = trace_report(session->fd, &session->pevent,
+ session->repipe);
padding = ALIGN(size_read, sizeof(u64)) - size_read;
if (read(session->fd, buf, padding) < 0)
diff --git a/tools/perf/util/hist.h b/tools/perf/util/hist.h
index 34bb556..0b096c2 100644
--- a/tools/perf/util/hist.h
+++ b/tools/perf/util/hist.h
@@ -47,6 +47,7 @@
HISTC_SYMBOL_TO,
HISTC_DSO_FROM,
HISTC_DSO_TO,
+ HISTC_SRCLINE,
HISTC_NR_COLS, /* Last entry */
};
diff --git a/tools/perf/util/include/linux/bitops.h b/tools/perf/util/include/linux/bitops.h
index f1584833..587a230 100644
--- a/tools/perf/util/include/linux/bitops.h
+++ b/tools/perf/util/include/linux/bitops.h
@@ -8,6 +8,8 @@
#define BITS_PER_LONG __WORDSIZE
#define BITS_PER_BYTE 8
#define BITS_TO_LONGS(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
+#define BITS_TO_U64(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u64))
+#define BITS_TO_U32(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u32))
#define for_each_set_bit(bit, addr, size) \
for ((bit) = find_first_bit((addr), (size)); \
diff --git a/tools/perf/util/include/linux/kernel.h b/tools/perf/util/include/linux/kernel.h
index 1eb804f..b6842c1 100644
--- a/tools/perf/util/include/linux/kernel.h
+++ b/tools/perf/util/include/linux/kernel.h
@@ -108,4 +108,14 @@
#define pr_debug3(fmt, ...) pr_debugN(3, pr_fmt(fmt), ##__VA_ARGS__)
#define pr_debug4(fmt, ...) pr_debugN(4, pr_fmt(fmt), ##__VA_ARGS__)
+/*
+ * This looks more complex than it should be. But we need to
+ * get the type for the ~ right in round_down (it needs to be
+ * as wide as the result!), and we want to evaluate the macro
+ * arguments just once each.
+ */
+#define __round_mask(x, y) ((__typeof__(x))((y)-1))
+#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1)
+#define round_down(x, y) ((x) & ~__round_mask(x, y))
+
#endif
diff --git a/tools/perf/util/map.c b/tools/perf/util/map.c
index 35ae568..a1f4e36 100644
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -669,25 +669,26 @@
struct machine *machines__findnew(struct rb_root *self, pid_t pid)
{
char path[PATH_MAX];
- const char *root_dir;
+ const char *root_dir = "";
struct machine *machine = machines__find(self, pid);
- if (!machine || machine->pid != pid) {
- if (pid == HOST_KERNEL_ID || pid == DEFAULT_GUEST_KERNEL_ID)
- root_dir = "";
- else {
- if (!symbol_conf.guestmount)
- goto out;
- sprintf(path, "%s/%d", symbol_conf.guestmount, pid);
- if (access(path, R_OK)) {
- pr_err("Can't access file %s\n", path);
- goto out;
- }
- root_dir = path;
+ if (machine && (machine->pid == pid))
+ goto out;
+
+ if ((pid != HOST_KERNEL_ID) &&
+ (pid != DEFAULT_GUEST_KERNEL_ID) &&
+ (symbol_conf.guestmount)) {
+ sprintf(path, "%s/%d", symbol_conf.guestmount, pid);
+ if (access(path, R_OK)) {
+ pr_err("Can't access file %s\n", path);
+ machine = NULL;
+ goto out;
}
- machine = machines__add(self, pid, root_dir);
+ root_dir = path;
}
+ machine = machines__add(self, pid, root_dir);
+
out:
return machine;
}
diff --git a/tools/perf/util/map.h b/tools/perf/util/map.h
index 81371ba..c14c665 100644
--- a/tools/perf/util/map.h
+++ b/tools/perf/util/map.h
@@ -157,7 +157,7 @@
void machine__delete(struct machine *self);
int machine__resolve_callchain(struct machine *machine,
- struct perf_evsel *evsel, struct thread *thread,
+ struct thread *thread,
struct ip_callchain *chain,
struct symbol **parent);
int maps__set_kallsyms_ref_reloc_sym(struct map **maps, const char *symbol_name,
diff --git a/tools/perf/util/parse-events-test.c b/tools/perf/util/parse-events-test.c
index 76b98e2..1b997d2 100644
--- a/tools/perf/util/parse-events-test.c
+++ b/tools/perf/util/parse-events-test.c
@@ -181,6 +181,22 @@
return 0;
}
+static int test__checkevent_breakpoint_rw(struct perf_evlist *evlist)
+{
+ struct perf_evsel *evsel = list_entry(evlist->entries.next,
+ struct perf_evsel, node);
+
+ TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries);
+ TEST_ASSERT_VAL("wrong type",
+ PERF_TYPE_BREAKPOINT == evsel->attr.type);
+ TEST_ASSERT_VAL("wrong config", 0 == evsel->attr.config);
+ TEST_ASSERT_VAL("wrong bp_type",
+ (HW_BREAKPOINT_R|HW_BREAKPOINT_W) == evsel->attr.bp_type);
+ TEST_ASSERT_VAL("wrong bp_len",
+ HW_BREAKPOINT_LEN_4 == evsel->attr.bp_len);
+ return 0;
+}
+
static int test__checkevent_tracepoint_modifier(struct perf_evlist *evlist)
{
struct perf_evsel *evsel = list_entry(evlist->entries.next,
@@ -309,6 +325,8 @@
TEST_ASSERT_VAL("wrong exclude_kernel", evsel->attr.exclude_kernel);
TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
+ TEST_ASSERT_VAL("wrong name",
+ !strcmp(perf_evsel__name(evsel), "mem:0x0:rw:u"));
return test__checkevent_breakpoint(evlist);
}
@@ -322,6 +340,8 @@
TEST_ASSERT_VAL("wrong exclude_kernel", !evsel->attr.exclude_kernel);
TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
TEST_ASSERT_VAL("wrong precise_ip", !evsel->attr.precise_ip);
+ TEST_ASSERT_VAL("wrong name",
+ !strcmp(perf_evsel__name(evsel), "mem:0x0:x:k"));
return test__checkevent_breakpoint_x(evlist);
}
@@ -335,6 +355,8 @@
TEST_ASSERT_VAL("wrong exclude_kernel", evsel->attr.exclude_kernel);
TEST_ASSERT_VAL("wrong exclude_hv", !evsel->attr.exclude_hv);
TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip);
+ TEST_ASSERT_VAL("wrong name",
+ !strcmp(perf_evsel__name(evsel), "mem:0x0:r:hp"));
return test__checkevent_breakpoint_r(evlist);
}
@@ -348,10 +370,27 @@
TEST_ASSERT_VAL("wrong exclude_kernel", evsel->attr.exclude_kernel);
TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip);
+ TEST_ASSERT_VAL("wrong name",
+ !strcmp(perf_evsel__name(evsel), "mem:0x0:w:up"));
return test__checkevent_breakpoint_w(evlist);
}
+static int test__checkevent_breakpoint_rw_modifier(struct perf_evlist *evlist)
+{
+ struct perf_evsel *evsel = list_entry(evlist->entries.next,
+ struct perf_evsel, node);
+
+ TEST_ASSERT_VAL("wrong exclude_user", evsel->attr.exclude_user);
+ TEST_ASSERT_VAL("wrong exclude_kernel", !evsel->attr.exclude_kernel);
+ TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
+ TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip);
+ TEST_ASSERT_VAL("wrong name",
+ !strcmp(perf_evsel__name(evsel), "mem:0x0:rw:kp"));
+
+ return test__checkevent_breakpoint_rw(evlist);
+}
+
static int test__checkevent_pmu(struct perf_evlist *evlist)
{
@@ -413,19 +452,63 @@
{
struct perf_evsel *evsel;
- /* cpu/config=1,name=krava1/u */
+ /* cpu/config=1,name=krava/u */
evsel = list_entry(evlist->entries.next, struct perf_evsel, node);
TEST_ASSERT_VAL("wrong number of entries", 2 == evlist->nr_entries);
TEST_ASSERT_VAL("wrong type", PERF_TYPE_RAW == evsel->attr.type);
TEST_ASSERT_VAL("wrong config", 1 == evsel->attr.config);
- TEST_ASSERT_VAL("wrong name", !strcmp(evsel->name, "krava"));
+ TEST_ASSERT_VAL("wrong name", !strcmp(perf_evsel__name(evsel), "krava"));
- /* cpu/config=2/" */
+ /* cpu/config=2/u" */
evsel = list_entry(evsel->node.next, struct perf_evsel, node);
TEST_ASSERT_VAL("wrong number of entries", 2 == evlist->nr_entries);
TEST_ASSERT_VAL("wrong type", PERF_TYPE_RAW == evsel->attr.type);
TEST_ASSERT_VAL("wrong config", 2 == evsel->attr.config);
- TEST_ASSERT_VAL("wrong name", !strcmp(evsel->name, "raw 0x2"));
+ TEST_ASSERT_VAL("wrong name",
+ !strcmp(perf_evsel__name(evsel), "raw 0x2:u"));
+
+ return 0;
+}
+
+static int test__checkterms_simple(struct list_head *terms)
+{
+ struct parse_events__term *term;
+
+ /* config=10 */
+ term = list_entry(terms->next, struct parse_events__term, list);
+ TEST_ASSERT_VAL("wrong type term",
+ term->type_term == PARSE_EVENTS__TERM_TYPE_CONFIG);
+ TEST_ASSERT_VAL("wrong type val",
+ term->type_val == PARSE_EVENTS__TERM_TYPE_NUM);
+ TEST_ASSERT_VAL("wrong val", term->val.num == 10);
+ TEST_ASSERT_VAL("wrong config", !term->config);
+
+ /* config1 */
+ term = list_entry(term->list.next, struct parse_events__term, list);
+ TEST_ASSERT_VAL("wrong type term",
+ term->type_term == PARSE_EVENTS__TERM_TYPE_CONFIG1);
+ TEST_ASSERT_VAL("wrong type val",
+ term->type_val == PARSE_EVENTS__TERM_TYPE_NUM);
+ TEST_ASSERT_VAL("wrong val", term->val.num == 1);
+ TEST_ASSERT_VAL("wrong config", !term->config);
+
+ /* config2=3 */
+ term = list_entry(term->list.next, struct parse_events__term, list);
+ TEST_ASSERT_VAL("wrong type term",
+ term->type_term == PARSE_EVENTS__TERM_TYPE_CONFIG2);
+ TEST_ASSERT_VAL("wrong type val",
+ term->type_val == PARSE_EVENTS__TERM_TYPE_NUM);
+ TEST_ASSERT_VAL("wrong val", term->val.num == 3);
+ TEST_ASSERT_VAL("wrong config", !term->config);
+
+ /* umask=1*/
+ term = list_entry(term->list.next, struct parse_events__term, list);
+ TEST_ASSERT_VAL("wrong type term",
+ term->type_term == PARSE_EVENTS__TERM_TYPE_USER);
+ TEST_ASSERT_VAL("wrong type val",
+ term->type_val == PARSE_EVENTS__TERM_TYPE_NUM);
+ TEST_ASSERT_VAL("wrong val", term->val.num == 1);
+ TEST_ASSERT_VAL("wrong config", !strcmp(term->config, "umask"));
return 0;
}
@@ -541,10 +624,16 @@
.name = "instructions:H",
.check = test__checkevent_exclude_guest_modifier,
},
+ [26] = {
+ .name = "mem:0:rw",
+ .check = test__checkevent_breakpoint_rw,
+ },
+ [27] = {
+ .name = "mem:0:rw:kp",
+ .check = test__checkevent_breakpoint_rw_modifier,
+ },
};
-#define TEST__EVENTS_CNT (sizeof(test__events) / sizeof(struct test__event_st))
-
static struct test__event_st test__events_pmu[] = {
[0] = {
.name = "cpu/config=10,config1,config2=3,period=1000/u",
@@ -556,10 +645,23 @@
},
};
-#define TEST__EVENTS_PMU_CNT (sizeof(test__events_pmu) / \
- sizeof(struct test__event_st))
+struct test__term {
+ const char *str;
+ __u32 type;
+ int (*check)(struct list_head *terms);
+};
-static int test(struct test__event_st *e)
+static struct test__term test__terms[] = {
+ [0] = {
+ .str = "config=10,config1,config2=3,umask=1",
+ .check = test__checkterms_simple,
+ },
+};
+
+#define TEST__TERMS_CNT (sizeof(test__terms) / \
+ sizeof(struct test__term))
+
+static int test_event(struct test__event_st *e)
{
struct perf_evlist *evlist;
int ret;
@@ -590,7 +692,48 @@
struct test__event_st *e = &events[i];
pr_debug("running test %d '%s'\n", i, e->name);
- ret = test(e);
+ ret = test_event(e);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+static int test_term(struct test__term *t)
+{
+ struct list_head *terms;
+ int ret;
+
+ terms = malloc(sizeof(*terms));
+ if (!terms)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(terms);
+
+ ret = parse_events_terms(terms, t->str);
+ if (ret) {
+ pr_debug("failed to parse terms '%s', err %d\n",
+ t->str , ret);
+ return ret;
+ }
+
+ ret = t->check(terms);
+ parse_events__free_terms(terms);
+
+ return ret;
+}
+
+static int test_terms(struct test__term *terms, unsigned cnt)
+{
+ int ret = 0;
+ unsigned i;
+
+ for (i = 0; i < cnt; i++) {
+ struct test__term *t = &terms[i];
+
+ pr_debug("running test %d '%s'\n", i, t->str);
+ ret = test_term(t);
if (ret)
break;
}
@@ -617,9 +760,17 @@
{
int ret;
- ret = test_events(test__events, TEST__EVENTS_CNT);
- if (!ret && test_pmu())
- ret = test_events(test__events_pmu, TEST__EVENTS_PMU_CNT);
+#define TEST_EVENTS(tests) \
+do { \
+ ret = test_events(tests, ARRAY_SIZE(tests)); \
+ if (ret) \
+ return ret; \
+} while (0)
- return ret;
+ TEST_EVENTS(test__events);
+
+ if (test_pmu())
+ TEST_EVENTS(test__events_pmu);
+
+ return test_terms(test__terms, ARRAY_SIZE(test__terms));
}
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 05dbc8b..1aa721d 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -11,14 +11,14 @@
#include "cache.h"
#include "header.h"
#include "debugfs.h"
+#include "parse-events-bison.h"
+#define YY_EXTRA_TYPE int
#include "parse-events-flex.h"
#include "pmu.h"
#define MAX_NAME_LEN 100
struct event_symbol {
- u8 type;
- u64 config;
const char *symbol;
const char *alias;
};
@@ -26,32 +26,88 @@
#ifdef PARSER_DEBUG
extern int parse_events_debug;
#endif
-int parse_events_parse(struct list_head *list, int *idx);
+int parse_events_parse(void *data, void *scanner);
-#define CHW(x) .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_##x
-#define CSW(x) .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_##x
+static struct event_symbol event_symbols_hw[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = {
+ .symbol = "cpu-cycles",
+ .alias = "cycles",
+ },
+ [PERF_COUNT_HW_INSTRUCTIONS] = {
+ .symbol = "instructions",
+ .alias = "",
+ },
+ [PERF_COUNT_HW_CACHE_REFERENCES] = {
+ .symbol = "cache-references",
+ .alias = "",
+ },
+ [PERF_COUNT_HW_CACHE_MISSES] = {
+ .symbol = "cache-misses",
+ .alias = "",
+ },
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = {
+ .symbol = "branch-instructions",
+ .alias = "branches",
+ },
+ [PERF_COUNT_HW_BRANCH_MISSES] = {
+ .symbol = "branch-misses",
+ .alias = "",
+ },
+ [PERF_COUNT_HW_BUS_CYCLES] = {
+ .symbol = "bus-cycles",
+ .alias = "",
+ },
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = {
+ .symbol = "stalled-cycles-frontend",
+ .alias = "idle-cycles-frontend",
+ },
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = {
+ .symbol = "stalled-cycles-backend",
+ .alias = "idle-cycles-backend",
+ },
+ [PERF_COUNT_HW_REF_CPU_CYCLES] = {
+ .symbol = "ref-cycles",
+ .alias = "",
+ },
+};
-static struct event_symbol event_symbols[] = {
- { CHW(CPU_CYCLES), "cpu-cycles", "cycles" },
- { CHW(STALLED_CYCLES_FRONTEND), "stalled-cycles-frontend", "idle-cycles-frontend" },
- { CHW(STALLED_CYCLES_BACKEND), "stalled-cycles-backend", "idle-cycles-backend" },
- { CHW(INSTRUCTIONS), "instructions", "" },
- { CHW(CACHE_REFERENCES), "cache-references", "" },
- { CHW(CACHE_MISSES), "cache-misses", "" },
- { CHW(BRANCH_INSTRUCTIONS), "branch-instructions", "branches" },
- { CHW(BRANCH_MISSES), "branch-misses", "" },
- { CHW(BUS_CYCLES), "bus-cycles", "" },
- { CHW(REF_CPU_CYCLES), "ref-cycles", "" },
-
- { CSW(CPU_CLOCK), "cpu-clock", "" },
- { CSW(TASK_CLOCK), "task-clock", "" },
- { CSW(PAGE_FAULTS), "page-faults", "faults" },
- { CSW(PAGE_FAULTS_MIN), "minor-faults", "" },
- { CSW(PAGE_FAULTS_MAJ), "major-faults", "" },
- { CSW(CONTEXT_SWITCHES), "context-switches", "cs" },
- { CSW(CPU_MIGRATIONS), "cpu-migrations", "migrations" },
- { CSW(ALIGNMENT_FAULTS), "alignment-faults", "" },
- { CSW(EMULATION_FAULTS), "emulation-faults", "" },
+static struct event_symbol event_symbols_sw[PERF_COUNT_SW_MAX] = {
+ [PERF_COUNT_SW_CPU_CLOCK] = {
+ .symbol = "cpu-clock",
+ .alias = "",
+ },
+ [PERF_COUNT_SW_TASK_CLOCK] = {
+ .symbol = "task-clock",
+ .alias = "",
+ },
+ [PERF_COUNT_SW_PAGE_FAULTS] = {
+ .symbol = "page-faults",
+ .alias = "faults",
+ },
+ [PERF_COUNT_SW_CONTEXT_SWITCHES] = {
+ .symbol = "context-switches",
+ .alias = "cs",
+ },
+ [PERF_COUNT_SW_CPU_MIGRATIONS] = {
+ .symbol = "cpu-migrations",
+ .alias = "migrations",
+ },
+ [PERF_COUNT_SW_PAGE_FAULTS_MIN] = {
+ .symbol = "minor-faults",
+ .alias = "",
+ },
+ [PERF_COUNT_SW_PAGE_FAULTS_MAJ] = {
+ .symbol = "major-faults",
+ .alias = "",
+ },
+ [PERF_COUNT_SW_ALIGNMENT_FAULTS] = {
+ .symbol = "alignment-faults",
+ .alias = "",
+ },
+ [PERF_COUNT_SW_EMULATION_FAULTS] = {
+ .symbol = "emulation-faults",
+ .alias = "",
+ },
};
#define __PERF_EVENT_FIELD(config, name) \
@@ -62,63 +118,6 @@
#define PERF_EVENT_TYPE(config) __PERF_EVENT_FIELD(config, TYPE)
#define PERF_EVENT_ID(config) __PERF_EVENT_FIELD(config, EVENT)
-static const char *sw_event_names[PERF_COUNT_SW_MAX] = {
- "cpu-clock",
- "task-clock",
- "page-faults",
- "context-switches",
- "CPU-migrations",
- "minor-faults",
- "major-faults",
- "alignment-faults",
- "emulation-faults",
-};
-
-#define MAX_ALIASES 8
-
-static const char *hw_cache[PERF_COUNT_HW_CACHE_MAX][MAX_ALIASES] = {
- { "L1-dcache", "l1-d", "l1d", "L1-data", },
- { "L1-icache", "l1-i", "l1i", "L1-instruction", },
- { "LLC", "L2", },
- { "dTLB", "d-tlb", "Data-TLB", },
- { "iTLB", "i-tlb", "Instruction-TLB", },
- { "branch", "branches", "bpu", "btb", "bpc", },
- { "node", },
-};
-
-static const char *hw_cache_op[PERF_COUNT_HW_CACHE_OP_MAX][MAX_ALIASES] = {
- { "load", "loads", "read", },
- { "store", "stores", "write", },
- { "prefetch", "prefetches", "speculative-read", "speculative-load", },
-};
-
-static const char *hw_cache_result[PERF_COUNT_HW_CACHE_RESULT_MAX]
- [MAX_ALIASES] = {
- { "refs", "Reference", "ops", "access", },
- { "misses", "miss", },
-};
-
-#define C(x) PERF_COUNT_HW_CACHE_##x
-#define CACHE_READ (1 << C(OP_READ))
-#define CACHE_WRITE (1 << C(OP_WRITE))
-#define CACHE_PREFETCH (1 << C(OP_PREFETCH))
-#define COP(x) (1 << x)
-
-/*
- * cache operartion stat
- * L1I : Read and prefetch only
- * ITLB and BPU : Read-only
- */
-static unsigned long hw_cache_stat[C(MAX)] = {
- [C(L1D)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
- [C(L1I)] = (CACHE_READ | CACHE_PREFETCH),
- [C(LL)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
- [C(DTLB)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
- [C(ITLB)] = (CACHE_READ),
- [C(BPU)] = (CACHE_READ),
- [C(NODE)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
-};
-
#define for_each_subsystem(sys_dir, sys_dirent, sys_next) \
while (!readdir_r(sys_dir, &sys_dirent, &sys_next) && sys_next) \
if (sys_dirent.d_type == DT_DIR && \
@@ -218,48 +217,6 @@
return NULL;
}
-#define TP_PATH_LEN (MAX_EVENT_LENGTH * 2 + 1)
-static const char *tracepoint_id_to_name(u64 config)
-{
- static char buf[TP_PATH_LEN];
- struct tracepoint_path *path;
-
- path = tracepoint_id_to_path(config);
- if (path) {
- snprintf(buf, TP_PATH_LEN, "%s:%s", path->system, path->name);
- free(path->name);
- free(path->system);
- free(path);
- } else
- snprintf(buf, TP_PATH_LEN, "%s:%s", "unknown", "unknown");
-
- return buf;
-}
-
-static int is_cache_op_valid(u8 cache_type, u8 cache_op)
-{
- if (hw_cache_stat[cache_type] & COP(cache_op))
- return 1; /* valid */
- else
- return 0; /* invalid */
-}
-
-static char *event_cache_name(u8 cache_type, u8 cache_op, u8 cache_result)
-{
- static char name[50];
-
- if (cache_result) {
- sprintf(name, "%s-%s-%s", hw_cache[cache_type][0],
- hw_cache_op[cache_op][0],
- hw_cache_result[cache_result][0]);
- } else {
- sprintf(name, "%s-%s", hw_cache[cache_type][0],
- hw_cache_op[cache_op][1]);
- }
-
- return name;
-}
-
const char *event_type(int type)
{
switch (type) {
@@ -282,76 +239,6 @@
return "unknown";
}
-const char *event_name(struct perf_evsel *evsel)
-{
- u64 config = evsel->attr.config;
- int type = evsel->attr.type;
-
- if (type == PERF_TYPE_RAW || type == PERF_TYPE_HARDWARE) {
- /*
- * XXX minimal fix, see comment on perf_evsen__name, this static buffer
- * will go away together with event_name in the next devel cycle.
- */
- static char bf[128];
- perf_evsel__name(evsel, bf, sizeof(bf));
- return bf;
- }
-
- if (evsel->name)
- return evsel->name;
-
- return __event_name(type, config);
-}
-
-const char *__event_name(int type, u64 config)
-{
- static char buf[32];
-
- if (type == PERF_TYPE_RAW) {
- sprintf(buf, "raw 0x%" PRIx64, config);
- return buf;
- }
-
- switch (type) {
- case PERF_TYPE_HARDWARE:
- return __perf_evsel__hw_name(config);
-
- case PERF_TYPE_HW_CACHE: {
- u8 cache_type, cache_op, cache_result;
-
- cache_type = (config >> 0) & 0xff;
- if (cache_type > PERF_COUNT_HW_CACHE_MAX)
- return "unknown-ext-hardware-cache-type";
-
- cache_op = (config >> 8) & 0xff;
- if (cache_op > PERF_COUNT_HW_CACHE_OP_MAX)
- return "unknown-ext-hardware-cache-op";
-
- cache_result = (config >> 16) & 0xff;
- if (cache_result > PERF_COUNT_HW_CACHE_RESULT_MAX)
- return "unknown-ext-hardware-cache-result";
-
- if (!is_cache_op_valid(cache_type, cache_op))
- return "invalid-cache";
-
- return event_cache_name(cache_type, cache_op, cache_result);
- }
-
- case PERF_TYPE_SOFTWARE:
- if (config < PERF_COUNT_SW_MAX && sw_event_names[config])
- return sw_event_names[config];
- return "unknown-software";
-
- case PERF_TYPE_TRACEPOINT:
- return tracepoint_id_to_name(config);
-
- default:
- break;
- }
-
- return "unknown";
-}
-
static int add_event(struct list_head **_list, int *idx,
struct perf_event_attr *attr, char *name)
{
@@ -373,19 +260,20 @@
return -ENOMEM;
}
- evsel->name = strdup(name);
+ if (name)
+ evsel->name = strdup(name);
list_add_tail(&evsel->node, list);
*_list = list;
return 0;
}
-static int parse_aliases(char *str, const char *names[][MAX_ALIASES], int size)
+static int parse_aliases(char *str, const char *names[][PERF_EVSEL__MAX_ALIASES], int size)
{
int i, j;
int n, longest = -1;
for (i = 0; i < size; i++) {
- for (j = 0; j < MAX_ALIASES && names[i][j]; j++) {
+ for (j = 0; j < PERF_EVSEL__MAX_ALIASES && names[i][j]; j++) {
n = strlen(names[i][j]);
if (n > longest && !strncasecmp(str, names[i][j], n))
longest = n;
@@ -410,7 +298,7 @@
* No fallback - if we cannot get a clear cache type
* then bail out:
*/
- cache_type = parse_aliases(type, hw_cache,
+ cache_type = parse_aliases(type, perf_evsel__hw_cache,
PERF_COUNT_HW_CACHE_MAX);
if (cache_type == -1)
return -EINVAL;
@@ -423,18 +311,18 @@
snprintf(name + n, MAX_NAME_LEN - n, "-%s\n", str);
if (cache_op == -1) {
- cache_op = parse_aliases(str, hw_cache_op,
+ cache_op = parse_aliases(str, perf_evsel__hw_cache_op,
PERF_COUNT_HW_CACHE_OP_MAX);
if (cache_op >= 0) {
- if (!is_cache_op_valid(cache_type, cache_op))
+ if (!perf_evsel__is_cache_op_valid(cache_type, cache_op))
return -EINVAL;
continue;
}
}
if (cache_result == -1) {
- cache_result = parse_aliases(str, hw_cache_result,
- PERF_COUNT_HW_CACHE_RESULT_MAX);
+ cache_result = parse_aliases(str, perf_evsel__hw_cache_result,
+ PERF_COUNT_HW_CACHE_RESULT_MAX);
if (cache_result >= 0)
continue;
}
@@ -549,21 +437,31 @@
if (!type || !type[i])
break;
+#define CHECK_SET_TYPE(bit) \
+do { \
+ if (attr->bp_type & bit) \
+ return -EINVAL; \
+ else \
+ attr->bp_type |= bit; \
+} while (0)
+
switch (type[i]) {
case 'r':
- attr->bp_type |= HW_BREAKPOINT_R;
+ CHECK_SET_TYPE(HW_BREAKPOINT_R);
break;
case 'w':
- attr->bp_type |= HW_BREAKPOINT_W;
+ CHECK_SET_TYPE(HW_BREAKPOINT_W);
break;
case 'x':
- attr->bp_type |= HW_BREAKPOINT_X;
+ CHECK_SET_TYPE(HW_BREAKPOINT_X);
break;
default:
return -EINVAL;
}
}
+#undef CHECK_SET_TYPE
+
if (!attr->bp_type) /* Default */
attr->bp_type = HW_BREAKPOINT_R | HW_BREAKPOINT_W;
@@ -574,7 +472,6 @@
void *ptr, char *type)
{
struct perf_event_attr attr;
- char name[MAX_NAME_LEN];
memset(&attr, 0, sizeof(attr));
attr.bp_addr = (unsigned long) ptr;
@@ -593,8 +490,7 @@
attr.type = PERF_TYPE_BREAKPOINT;
- snprintf(name, MAX_NAME_LEN, "mem:%p:%s", ptr, type ? type : "rw");
- return add_event(list, idx, &attr, name);
+ return add_event(list, idx, &attr, NULL);
}
static int config_term(struct perf_event_attr *attr,
@@ -666,8 +562,7 @@
config_attr(&attr, head_config, 1))
return -EINVAL;
- return add_event(list, idx, &attr,
- (char *) __event_name(type, config));
+ return add_event(list, idx, &attr, NULL);
}
static int parse_events__is_name_term(struct parse_events__term *term)
@@ -675,8 +570,7 @@
return term->type_term == PARSE_EVENTS__TERM_TYPE_NAME;
}
-static char *pmu_event_name(struct perf_event_attr *attr,
- struct list_head *head_terms)
+static char *pmu_event_name(struct list_head *head_terms)
{
struct parse_events__term *term;
@@ -684,7 +578,7 @@
if (parse_events__is_name_term(term))
return term->val.str;
- return (char *) __event_name(PERF_TYPE_RAW, attr->config);
+ return NULL;
}
int parse_events_add_pmu(struct list_head **list, int *idx,
@@ -699,6 +593,9 @@
memset(&attr, 0, sizeof(attr));
+ if (perf_pmu__check_alias(pmu, head_config))
+ return -EINVAL;
+
/*
* Configure hardcoded terms first, no need to check
* return value when called with fail == 0 ;)
@@ -709,7 +606,7 @@
return -EINVAL;
return add_event(list, idx, &attr,
- pmu_event_name(&attr, head_config));
+ pmu_event_name(head_config));
}
void parse_events_update_lists(struct list_head *list_event,
@@ -787,27 +684,62 @@
return 0;
}
-int parse_events(struct perf_evlist *evlist, const char *str, int unset __used)
+static int parse_events__scanner(const char *str, void *data, int start_token)
{
- LIST_HEAD(list);
- LIST_HEAD(list_tmp);
YY_BUFFER_STATE buffer;
- int ret, idx = evlist->nr_entries;
+ void *scanner;
+ int ret;
- buffer = parse_events__scan_string(str);
+ ret = parse_events_lex_init_extra(start_token, &scanner);
+ if (ret)
+ return ret;
+
+ buffer = parse_events__scan_string(str, scanner);
#ifdef PARSER_DEBUG
parse_events_debug = 1;
#endif
- ret = parse_events_parse(&list, &idx);
+ ret = parse_events_parse(data, scanner);
- parse_events__flush_buffer(buffer);
- parse_events__delete_buffer(buffer);
- parse_events_lex_destroy();
+ parse_events__flush_buffer(buffer, scanner);
+ parse_events__delete_buffer(buffer, scanner);
+ parse_events_lex_destroy(scanner);
+ return ret;
+}
+/*
+ * parse event config string, return a list of event terms.
+ */
+int parse_events_terms(struct list_head *terms, const char *str)
+{
+ struct parse_events_data__terms data = {
+ .terms = NULL,
+ };
+ int ret;
+
+ ret = parse_events__scanner(str, &data, PE_START_TERMS);
if (!ret) {
- int entries = idx - evlist->nr_entries;
- perf_evlist__splice_list_tail(evlist, &list, entries);
+ list_splice(data.terms, terms);
+ free(data.terms);
+ return 0;
+ }
+
+ parse_events__free_terms(data.terms);
+ return ret;
+}
+
+int parse_events(struct perf_evlist *evlist, const char *str, int unset __used)
+{
+ struct parse_events_data__events data = {
+ .list = LIST_HEAD_INIT(data.list),
+ .idx = evlist->nr_entries,
+ };
+ int ret;
+
+ ret = parse_events__scanner(str, &data, PE_START_EVENTS);
+ if (!ret) {
+ int entries = data.idx - evlist->nr_entries;
+ perf_evlist__splice_list_tail(evlist, &data.list, entries);
return 0;
}
@@ -946,16 +878,13 @@
return 0;
}
-void print_events_type(u8 type)
+static void __print_events_type(u8 type, struct event_symbol *syms,
+ unsigned max)
{
- struct event_symbol *syms = event_symbols;
- unsigned int i;
char name[64];
+ unsigned i;
- for (i = 0; i < ARRAY_SIZE(event_symbols); i++, syms++) {
- if (type != syms->type)
- continue;
-
+ for (i = 0; i < max ; i++, syms++) {
if (strlen(syms->alias))
snprintf(name, sizeof(name), "%s OR %s",
syms->symbol, syms->alias);
@@ -967,19 +896,28 @@
}
}
+void print_events_type(u8 type)
+{
+ if (type == PERF_TYPE_SOFTWARE)
+ __print_events_type(type, event_symbols_sw, PERF_COUNT_SW_MAX);
+ else
+ __print_events_type(type, event_symbols_hw, PERF_COUNT_HW_MAX);
+}
+
int print_hwcache_events(const char *event_glob)
{
unsigned int type, op, i, printed = 0;
+ char name[64];
for (type = 0; type < PERF_COUNT_HW_CACHE_MAX; type++) {
for (op = 0; op < PERF_COUNT_HW_CACHE_OP_MAX; op++) {
/* skip invalid cache type */
- if (!is_cache_op_valid(type, op))
+ if (!perf_evsel__is_cache_op_valid(type, op))
continue;
for (i = 0; i < PERF_COUNT_HW_CACHE_RESULT_MAX; i++) {
- char *name = event_cache_name(type, op, i);
-
+ __perf_evsel__hw_cache_type_op_res_name(type, op, i,
+ name, sizeof(name));
if (event_glob != NULL && !strglobmatch(name, event_glob))
continue;
@@ -993,26 +931,13 @@
return printed;
}
-/*
- * Print the help text for the event symbols:
- */
-void print_events(const char *event_glob)
+static void print_symbol_events(const char *event_glob, unsigned type,
+ struct event_symbol *syms, unsigned max)
{
- unsigned int i, type, prev_type = -1, printed = 0, ntypes_printed = 0;
- struct event_symbol *syms = event_symbols;
+ unsigned i, printed = 0;
char name[MAX_NAME_LEN];
- printf("\n");
- printf("List of pre-defined events (to be used in -e):\n");
-
- for (i = 0; i < ARRAY_SIZE(event_symbols); i++, syms++) {
- type = syms->type;
-
- if (type != prev_type && printed) {
- printf("\n");
- printed = 0;
- ntypes_printed++;
- }
+ for (i = 0; i < max; i++, syms++) {
if (event_glob != NULL &&
!(strglobmatch(syms->symbol, event_glob) ||
@@ -1023,17 +948,31 @@
snprintf(name, MAX_NAME_LEN, "%s OR %s", syms->symbol, syms->alias);
else
strncpy(name, syms->symbol, MAX_NAME_LEN);
- printf(" %-50s [%s]\n", name,
- event_type_descriptors[type]);
- prev_type = type;
- ++printed;
+ printf(" %-50s [%s]\n", name, event_type_descriptors[type]);
+
+ printed++;
}
- if (ntypes_printed) {
- printed = 0;
+ if (printed)
printf("\n");
- }
+}
+
+/*
+ * Print the help text for the event symbols:
+ */
+void print_events(const char *event_glob)
+{
+
+ printf("\n");
+ printf("List of pre-defined events (to be used in -e):\n");
+
+ print_symbol_events(event_glob, PERF_TYPE_HARDWARE,
+ event_symbols_hw, PERF_COUNT_HW_MAX);
+
+ print_symbol_events(event_glob, PERF_TYPE_SOFTWARE,
+ event_symbols_sw, PERF_COUNT_SW_MAX);
+
print_hwcache_events(event_glob);
if (event_glob != NULL)
@@ -1106,6 +1045,13 @@
config, str, 0);
}
+int parse_events__term_clone(struct parse_events__term **new,
+ struct parse_events__term *term)
+{
+ return new_term(new, term->type_val, term->type_term, term->config,
+ term->val.str, term->val.num);
+}
+
void parse_events__free_terms(struct list_head *terms)
{
struct parse_events__term *term, *h;
diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h
index 8cac57a..ee9c218 100644
--- a/tools/perf/util/parse-events.h
+++ b/tools/perf/util/parse-events.h
@@ -26,13 +26,12 @@
extern bool have_tracepoints(struct list_head *evlist);
const char *event_type(int type);
-const char *event_name(struct perf_evsel *event);
-extern const char *__event_name(int type, u64 config);
extern int parse_events_option(const struct option *opt, const char *str,
int unset);
extern int parse_events(struct perf_evlist *evlist, const char *str,
int unset);
+extern int parse_events_terms(struct list_head *terms, const char *str);
extern int parse_filter(const struct option *opt, const char *str, int unset);
#define EVENTS_HELP_MAX (128*1024)
@@ -63,11 +62,22 @@
struct list_head list;
};
+struct parse_events_data__events {
+ struct list_head list;
+ int idx;
+};
+
+struct parse_events_data__terms {
+ struct list_head *terms;
+};
+
int parse_events__is_hardcoded_term(struct parse_events__term *term);
int parse_events__term_num(struct parse_events__term **_term,
int type_term, char *config, long num);
int parse_events__term_str(struct parse_events__term **_term,
int type_term, char *config, char *str);
+int parse_events__term_clone(struct parse_events__term **new,
+ struct parse_events__term *term);
void parse_events__free_terms(struct list_head *terms);
int parse_events_modifier(struct list_head *list, char *str);
int parse_events_add_tracepoint(struct list_head **list, int *idx,
@@ -83,8 +93,7 @@
char *pmu , struct list_head *head_config);
void parse_events_update_lists(struct list_head *list_event,
struct list_head *list_all);
-void parse_events_error(struct list_head *list_all,
- int *idx, char const *msg);
+void parse_events_error(void *data, void *scanner, char const *msg);
int parse_events__test(void);
void print_events(const char *event_glob);
diff --git a/tools/perf/util/parse-events.l b/tools/perf/util/parse-events.l
index 618a8e7..384ca74 100644
--- a/tools/perf/util/parse-events.l
+++ b/tools/perf/util/parse-events.l
@@ -1,4 +1,6 @@
+%option reentrant
+%option bison-bridge
%option prefix="parse_events_"
%option stack
@@ -8,7 +10,10 @@
#include "parse-events-bison.h"
#include "parse-events.h"
-static int __value(char *str, int base, int token)
+char *parse_events_get_text(yyscan_t yyscanner);
+YYSTYPE *parse_events_get_lval(yyscan_t yyscanner);
+
+static int __value(YYSTYPE *yylval, char *str, int base, int token)
{
long num;
@@ -17,35 +22,48 @@
if (errno)
return PE_ERROR;
- parse_events_lval.num = num;
+ yylval->num = num;
return token;
}
-static int value(int base)
+static int value(yyscan_t scanner, int base)
{
- return __value(parse_events_text, base, PE_VALUE);
+ YYSTYPE *yylval = parse_events_get_lval(scanner);
+ char *text = parse_events_get_text(scanner);
+
+ return __value(yylval, text, base, PE_VALUE);
}
-static int raw(void)
+static int raw(yyscan_t scanner)
{
- return __value(parse_events_text + 1, 16, PE_RAW);
+ YYSTYPE *yylval = parse_events_get_lval(scanner);
+ char *text = parse_events_get_text(scanner);
+
+ return __value(yylval, text + 1, 16, PE_RAW);
}
-static int str(int token)
+static int str(yyscan_t scanner, int token)
{
- parse_events_lval.str = strdup(parse_events_text);
+ YYSTYPE *yylval = parse_events_get_lval(scanner);
+ char *text = parse_events_get_text(scanner);
+
+ yylval->str = strdup(text);
return token;
}
-static int sym(int type, int config)
+static int sym(yyscan_t scanner, int type, int config)
{
- parse_events_lval.num = (type << 16) + config;
- return PE_VALUE_SYM;
+ YYSTYPE *yylval = parse_events_get_lval(scanner);
+
+ yylval->num = (type << 16) + config;
+ return type == PERF_TYPE_HARDWARE ? PE_VALUE_SYM_HW : PE_VALUE_SYM_SW;
}
-static int term(int type)
+static int term(yyscan_t scanner, int type)
{
- parse_events_lval.num = type;
+ YYSTYPE *yylval = parse_events_get_lval(scanner);
+
+ yylval->num = type;
return PE_TERM;
}
@@ -58,28 +76,41 @@
num_raw_hex [a-fA-F0-9]+
name [a-zA-Z_*?][a-zA-Z0-9_*?]*
modifier_event [ukhpGH]{1,8}
-modifier_bp [rwx]
+modifier_bp [rwx]{1,3}
%%
-cpu-cycles|cycles { return sym(PERF_TYPE_HARDWARE, PERF_COUNT_HW_CPU_CYCLES); }
-stalled-cycles-frontend|idle-cycles-frontend { return sym(PERF_TYPE_HARDWARE, PERF_COUNT_HW_STALLED_CYCLES_FRONTEND); }
-stalled-cycles-backend|idle-cycles-backend { return sym(PERF_TYPE_HARDWARE, PERF_COUNT_HW_STALLED_CYCLES_BACKEND); }
-instructions { return sym(PERF_TYPE_HARDWARE, PERF_COUNT_HW_INSTRUCTIONS); }
-cache-references { return sym(PERF_TYPE_HARDWARE, PERF_COUNT_HW_CACHE_REFERENCES); }
-cache-misses { return sym(PERF_TYPE_HARDWARE, PERF_COUNT_HW_CACHE_MISSES); }
-branch-instructions|branches { return sym(PERF_TYPE_HARDWARE, PERF_COUNT_HW_BRANCH_INSTRUCTIONS); }
-branch-misses { return sym(PERF_TYPE_HARDWARE, PERF_COUNT_HW_BRANCH_MISSES); }
-bus-cycles { return sym(PERF_TYPE_HARDWARE, PERF_COUNT_HW_BUS_CYCLES); }
-ref-cycles { return sym(PERF_TYPE_HARDWARE, PERF_COUNT_HW_REF_CPU_CYCLES); }
-cpu-clock { return sym(PERF_TYPE_SOFTWARE, PERF_COUNT_SW_CPU_CLOCK); }
-task-clock { return sym(PERF_TYPE_SOFTWARE, PERF_COUNT_SW_TASK_CLOCK); }
-page-faults|faults { return sym(PERF_TYPE_SOFTWARE, PERF_COUNT_SW_PAGE_FAULTS); }
-minor-faults { return sym(PERF_TYPE_SOFTWARE, PERF_COUNT_SW_PAGE_FAULTS_MIN); }
-major-faults { return sym(PERF_TYPE_SOFTWARE, PERF_COUNT_SW_PAGE_FAULTS_MAJ); }
-context-switches|cs { return sym(PERF_TYPE_SOFTWARE, PERF_COUNT_SW_CONTEXT_SWITCHES); }
-cpu-migrations|migrations { return sym(PERF_TYPE_SOFTWARE, PERF_COUNT_SW_CPU_MIGRATIONS); }
-alignment-faults { return sym(PERF_TYPE_SOFTWARE, PERF_COUNT_SW_ALIGNMENT_FAULTS); }
-emulation-faults { return sym(PERF_TYPE_SOFTWARE, PERF_COUNT_SW_EMULATION_FAULTS); }
+
+%{
+ {
+ int start_token;
+
+ start_token = (int) parse_events_get_extra(yyscanner);
+ if (start_token) {
+ parse_events_set_extra(NULL, yyscanner);
+ return start_token;
+ }
+ }
+%}
+
+cpu-cycles|cycles { return sym(yyscanner, PERF_TYPE_HARDWARE, PERF_COUNT_HW_CPU_CYCLES); }
+stalled-cycles-frontend|idle-cycles-frontend { return sym(yyscanner, PERF_TYPE_HARDWARE, PERF_COUNT_HW_STALLED_CYCLES_FRONTEND); }
+stalled-cycles-backend|idle-cycles-backend { return sym(yyscanner, PERF_TYPE_HARDWARE, PERF_COUNT_HW_STALLED_CYCLES_BACKEND); }
+instructions { return sym(yyscanner, PERF_TYPE_HARDWARE, PERF_COUNT_HW_INSTRUCTIONS); }
+cache-references { return sym(yyscanner, PERF_TYPE_HARDWARE, PERF_COUNT_HW_CACHE_REFERENCES); }
+cache-misses { return sym(yyscanner, PERF_TYPE_HARDWARE, PERF_COUNT_HW_CACHE_MISSES); }
+branch-instructions|branches { return sym(yyscanner, PERF_TYPE_HARDWARE, PERF_COUNT_HW_BRANCH_INSTRUCTIONS); }
+branch-misses { return sym(yyscanner, PERF_TYPE_HARDWARE, PERF_COUNT_HW_BRANCH_MISSES); }
+bus-cycles { return sym(yyscanner, PERF_TYPE_HARDWARE, PERF_COUNT_HW_BUS_CYCLES); }
+ref-cycles { return sym(yyscanner, PERF_TYPE_HARDWARE, PERF_COUNT_HW_REF_CPU_CYCLES); }
+cpu-clock { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_CPU_CLOCK); }
+task-clock { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_TASK_CLOCK); }
+page-faults|faults { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_PAGE_FAULTS); }
+minor-faults { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_PAGE_FAULTS_MIN); }
+major-faults { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_PAGE_FAULTS_MAJ); }
+context-switches|cs { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_CONTEXT_SWITCHES); }
+cpu-migrations|migrations { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_CPU_MIGRATIONS); }
+alignment-faults { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_ALIGNMENT_FAULTS); }
+emulation-faults { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_EMULATION_FAULTS); }
L1-dcache|l1-d|l1d|L1-data |
L1-icache|l1-i|l1i|L1-instruction |
@@ -87,14 +118,14 @@
dTLB|d-tlb|Data-TLB |
iTLB|i-tlb|Instruction-TLB |
branch|branches|bpu|btb|bpc |
-node { return str(PE_NAME_CACHE_TYPE); }
+node { return str(yyscanner, PE_NAME_CACHE_TYPE); }
load|loads|read |
store|stores|write |
prefetch|prefetches |
speculative-read|speculative-load |
refs|Reference|ops|access |
-misses|miss { return str(PE_NAME_CACHE_OP_RESULT); }
+misses|miss { return str(yyscanner, PE_NAME_CACHE_OP_RESULT); }
/*
* These are event config hardcoded term names to be specified
@@ -102,38 +133,39 @@
* so we can put them here directly. In case the we have a conflict
* in future, this needs to go into '//' condition block.
*/
-config { return term(PARSE_EVENTS__TERM_TYPE_CONFIG); }
-config1 { return term(PARSE_EVENTS__TERM_TYPE_CONFIG1); }
-config2 { return term(PARSE_EVENTS__TERM_TYPE_CONFIG2); }
-name { return term(PARSE_EVENTS__TERM_TYPE_NAME); }
-period { return term(PARSE_EVENTS__TERM_TYPE_SAMPLE_PERIOD); }
-branch_type { return term(PARSE_EVENTS__TERM_TYPE_BRANCH_SAMPLE_TYPE); }
+config { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_CONFIG); }
+config1 { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_CONFIG1); }
+config2 { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_CONFIG2); }
+name { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_NAME); }
+period { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_SAMPLE_PERIOD); }
+branch_type { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_BRANCH_SAMPLE_TYPE); }
mem: { BEGIN(mem); return PE_PREFIX_MEM; }
-r{num_raw_hex} { return raw(); }
-{num_dec} { return value(10); }
-{num_hex} { return value(16); }
+r{num_raw_hex} { return raw(yyscanner); }
+{num_dec} { return value(yyscanner, 10); }
+{num_hex} { return value(yyscanner, 16); }
-{modifier_event} { return str(PE_MODIFIER_EVENT); }
-{name} { return str(PE_NAME); }
+{modifier_event} { return str(yyscanner, PE_MODIFIER_EVENT); }
+{name} { return str(yyscanner, PE_NAME); }
"/" { return '/'; }
- { return '-'; }
, { return ','; }
: { return ':'; }
= { return '='; }
+\n { }
<mem>{
-{modifier_bp} { return str(PE_MODIFIER_BP); }
+{modifier_bp} { return str(yyscanner, PE_MODIFIER_BP); }
: { return ':'; }
-{num_dec} { return value(10); }
-{num_hex} { return value(16); }
+{num_dec} { return value(yyscanner, 10); }
+{num_hex} { return value(yyscanner, 16); }
/*
* We need to separate 'mem:' scanner part, in order to get specific
* modifier bits parsed out. Otherwise we would need to handle PE_NAME
* and we'd need to parse it manually. During the escape from <mem>
* state we need to put the escaping char back, so we dont miss it.
*/
-. { unput(*parse_events_text); BEGIN(INITIAL); }
+. { unput(*yytext); BEGIN(INITIAL); }
/*
* We destroy the scanner after reaching EOF,
* but anyway just to be sure get back to INIT state.
@@ -143,7 +175,7 @@
%%
-int parse_events_wrap(void)
+int parse_events_wrap(void *scanner __used)
{
return 1;
}
diff --git a/tools/perf/util/parse-events.y b/tools/perf/util/parse-events.y
index 362cc59..2bc5fbf 100644
--- a/tools/perf/util/parse-events.y
+++ b/tools/perf/util/parse-events.y
@@ -1,7 +1,8 @@
-
+%pure-parser
%name-prefix "parse_events_"
-%parse-param {struct list_head *list_all}
-%parse-param {int *idx}
+%parse-param {void *_data}
+%parse-param {void *scanner}
+%lex-param {void* scanner}
%{
@@ -12,8 +13,9 @@
#include "types.h"
#include "util.h"
#include "parse-events.h"
+#include "parse-events-bison.h"
-extern int parse_events_lex (void);
+extern int parse_events_lex (YYSTYPE* lvalp, void* scanner);
#define ABORT_ON(val) \
do { \
@@ -23,14 +25,16 @@
%}
-%token PE_VALUE PE_VALUE_SYM PE_RAW PE_TERM
+%token PE_START_EVENTS PE_START_TERMS
+%token PE_VALUE PE_VALUE_SYM_HW PE_VALUE_SYM_SW PE_RAW PE_TERM
%token PE_NAME
%token PE_MODIFIER_EVENT PE_MODIFIER_BP
%token PE_NAME_CACHE_TYPE PE_NAME_CACHE_OP_RESULT
%token PE_PREFIX_MEM PE_PREFIX_RAW
%token PE_ERROR
%type <num> PE_VALUE
-%type <num> PE_VALUE_SYM
+%type <num> PE_VALUE_SYM_HW
+%type <num> PE_VALUE_SYM_SW
%type <num> PE_RAW
%type <num> PE_TERM
%type <str> PE_NAME
@@ -38,6 +42,7 @@
%type <str> PE_NAME_CACHE_OP_RESULT
%type <str> PE_MODIFIER_EVENT
%type <str> PE_MODIFIER_BP
+%type <num> value_sym
%type <head> event_config
%type <term> event_term
%type <head> event_pmu
@@ -58,24 +63,33 @@
}
%%
+start:
+PE_START_EVENTS events
+|
+PE_START_TERMS terms
+
events:
events ',' event | event
event:
event_def PE_MODIFIER_EVENT
{
+ struct parse_events_data__events *data = _data;
+
/*
* Apply modifier on all events added by single event definition
* (there could be more events added for multiple tracepoint
* definitions via '*?'.
*/
ABORT_ON(parse_events_modifier($1, $2));
- parse_events_update_lists($1, list_all);
+ parse_events_update_lists($1, &data->list);
}
|
event_def
{
- parse_events_update_lists($1, list_all);
+ struct parse_events_data__events *data = _data;
+
+ parse_events_update_lists($1, &data->list);
}
event_def: event_pmu |
@@ -89,104 +103,131 @@
event_pmu:
PE_NAME '/' event_config '/'
{
+ struct parse_events_data__events *data = _data;
struct list_head *list = NULL;
- ABORT_ON(parse_events_add_pmu(&list, idx, $1, $3));
+ ABORT_ON(parse_events_add_pmu(&list, &data->idx, $1, $3));
parse_events__free_terms($3);
$$ = list;
}
+value_sym:
+PE_VALUE_SYM_HW
+|
+PE_VALUE_SYM_SW
+
event_legacy_symbol:
-PE_VALUE_SYM '/' event_config '/'
+value_sym '/' event_config '/'
{
+ struct parse_events_data__events *data = _data;
struct list_head *list = NULL;
int type = $1 >> 16;
int config = $1 & 255;
- ABORT_ON(parse_events_add_numeric(&list, idx, type, config, $3));
+ ABORT_ON(parse_events_add_numeric(&list, &data->idx,
+ type, config, $3));
parse_events__free_terms($3);
$$ = list;
}
|
-PE_VALUE_SYM sep_slash_dc
+value_sym sep_slash_dc
{
+ struct parse_events_data__events *data = _data;
struct list_head *list = NULL;
int type = $1 >> 16;
int config = $1 & 255;
- ABORT_ON(parse_events_add_numeric(&list, idx, type, config, NULL));
+ ABORT_ON(parse_events_add_numeric(&list, &data->idx,
+ type, config, NULL));
$$ = list;
}
event_legacy_cache:
PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT '-' PE_NAME_CACHE_OP_RESULT
{
+ struct parse_events_data__events *data = _data;
struct list_head *list = NULL;
- ABORT_ON(parse_events_add_cache(&list, idx, $1, $3, $5));
+ ABORT_ON(parse_events_add_cache(&list, &data->idx, $1, $3, $5));
$$ = list;
}
|
PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT
{
+ struct parse_events_data__events *data = _data;
struct list_head *list = NULL;
- ABORT_ON(parse_events_add_cache(&list, idx, $1, $3, NULL));
+ ABORT_ON(parse_events_add_cache(&list, &data->idx, $1, $3, NULL));
$$ = list;
}
|
PE_NAME_CACHE_TYPE
{
+ struct parse_events_data__events *data = _data;
struct list_head *list = NULL;
- ABORT_ON(parse_events_add_cache(&list, idx, $1, NULL, NULL));
+ ABORT_ON(parse_events_add_cache(&list, &data->idx, $1, NULL, NULL));
$$ = list;
}
event_legacy_mem:
PE_PREFIX_MEM PE_VALUE ':' PE_MODIFIER_BP sep_dc
{
+ struct parse_events_data__events *data = _data;
struct list_head *list = NULL;
- ABORT_ON(parse_events_add_breakpoint(&list, idx, (void *) $2, $4));
+ ABORT_ON(parse_events_add_breakpoint(&list, &data->idx,
+ (void *) $2, $4));
$$ = list;
}
|
PE_PREFIX_MEM PE_VALUE sep_dc
{
+ struct parse_events_data__events *data = _data;
struct list_head *list = NULL;
- ABORT_ON(parse_events_add_breakpoint(&list, idx, (void *) $2, NULL));
+ ABORT_ON(parse_events_add_breakpoint(&list, &data->idx,
+ (void *) $2, NULL));
$$ = list;
}
event_legacy_tracepoint:
PE_NAME ':' PE_NAME
{
+ struct parse_events_data__events *data = _data;
struct list_head *list = NULL;
- ABORT_ON(parse_events_add_tracepoint(&list, idx, $1, $3));
+ ABORT_ON(parse_events_add_tracepoint(&list, &data->idx, $1, $3));
$$ = list;
}
event_legacy_numeric:
PE_VALUE ':' PE_VALUE
{
+ struct parse_events_data__events *data = _data;
struct list_head *list = NULL;
- ABORT_ON(parse_events_add_numeric(&list, idx, $1, $3, NULL));
+ ABORT_ON(parse_events_add_numeric(&list, &data->idx, $1, $3, NULL));
$$ = list;
}
event_legacy_raw:
PE_RAW
{
+ struct parse_events_data__events *data = _data;
struct list_head *list = NULL;
- ABORT_ON(parse_events_add_numeric(&list, idx, PERF_TYPE_RAW, $1, NULL));
+ ABORT_ON(parse_events_add_numeric(&list, &data->idx,
+ PERF_TYPE_RAW, $1, NULL));
$$ = list;
}
+terms: event_config
+{
+ struct parse_events_data__terms *data = _data;
+ data->terms = $1;
+}
+
event_config:
event_config ',' event_term
{
@@ -267,8 +308,7 @@
%%
-void parse_events_error(struct list_head *list_all __used,
- int *idx __used,
+void parse_events_error(void *data __used, void *scanner __used,
char const *msg __used)
{
}
diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c
index a119a53..67715a4 100644
--- a/tools/perf/util/pmu.c
+++ b/tools/perf/util/pmu.c
@@ -72,7 +72,7 @@
"%s/bus/event_source/devices/%s/format", sysfs, name);
if (stat(path, &st) < 0)
- return -1;
+ return 0; /* no error if format does not exist */
if (pmu_format_parse(path, format))
return -1;
@@ -80,6 +80,114 @@
return 0;
}
+static int perf_pmu__new_alias(struct list_head *list, char *name, FILE *file)
+{
+ struct perf_pmu__alias *alias;
+ char buf[256];
+ int ret;
+
+ ret = fread(buf, 1, sizeof(buf), file);
+ if (ret == 0)
+ return -EINVAL;
+ buf[ret] = 0;
+
+ alias = malloc(sizeof(*alias));
+ if (!alias)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&alias->terms);
+ ret = parse_events_terms(&alias->terms, buf);
+ if (ret) {
+ free(alias);
+ return ret;
+ }
+
+ alias->name = strdup(name);
+ list_add_tail(&alias->list, list);
+ return 0;
+}
+
+/*
+ * Process all the sysfs attributes located under the directory
+ * specified in 'dir' parameter.
+ */
+static int pmu_aliases_parse(char *dir, struct list_head *head)
+{
+ struct dirent *evt_ent;
+ DIR *event_dir;
+ int ret = 0;
+
+ event_dir = opendir(dir);
+ if (!event_dir)
+ return -EINVAL;
+
+ while (!ret && (evt_ent = readdir(event_dir))) {
+ char path[PATH_MAX];
+ char *name = evt_ent->d_name;
+ FILE *file;
+
+ if (!strcmp(name, ".") || !strcmp(name, ".."))
+ continue;
+
+ snprintf(path, PATH_MAX, "%s/%s", dir, name);
+
+ ret = -EINVAL;
+ file = fopen(path, "r");
+ if (!file)
+ break;
+ ret = perf_pmu__new_alias(head, name, file);
+ fclose(file);
+ }
+
+ closedir(event_dir);
+ return ret;
+}
+
+/*
+ * Reading the pmu event aliases definition, which should be located at:
+ * /sys/bus/event_source/devices/<dev>/events as sysfs group attributes.
+ */
+static int pmu_aliases(char *name, struct list_head *head)
+{
+ struct stat st;
+ char path[PATH_MAX];
+ const char *sysfs;
+
+ sysfs = sysfs_find_mountpoint();
+ if (!sysfs)
+ return -1;
+
+ snprintf(path, PATH_MAX,
+ "%s/bus/event_source/devices/%s/events", sysfs, name);
+
+ if (stat(path, &st) < 0)
+ return -1;
+
+ if (pmu_aliases_parse(path, head))
+ return -1;
+
+ return 0;
+}
+
+static int pmu_alias_terms(struct perf_pmu__alias *alias,
+ struct list_head *terms)
+{
+ struct parse_events__term *term, *clone;
+ LIST_HEAD(list);
+ int ret;
+
+ list_for_each_entry(term, &alias->terms, list) {
+ ret = parse_events__term_clone(&clone, term);
+ if (ret) {
+ parse_events__free_terms(&list);
+ return ret;
+ }
+ list_add_tail(&clone->list, &list);
+ }
+ list_splice(&list, terms);
+ return 0;
+}
+
/*
* Reading/parsing the default pmu type value, which should be
* located at:
@@ -118,6 +226,7 @@
{
struct perf_pmu *pmu;
LIST_HEAD(format);
+ LIST_HEAD(aliases);
__u32 type;
/*
@@ -135,10 +244,15 @@
if (!pmu)
return NULL;
+ pmu_aliases(name, &aliases);
+
INIT_LIST_HEAD(&pmu->format);
+ INIT_LIST_HEAD(&pmu->aliases);
list_splice(&format, &pmu->format);
+ list_splice(&aliases, &pmu->aliases);
pmu->name = strdup(name);
pmu->type = type;
+ list_add_tail(&pmu->list, &pmus);
return pmu;
}
@@ -279,6 +393,59 @@
return pmu_config(&pmu->format, attr, head_terms);
}
+static struct perf_pmu__alias *pmu_find_alias(struct perf_pmu *pmu,
+ struct parse_events__term *term)
+{
+ struct perf_pmu__alias *alias;
+ char *name;
+
+ if (parse_events__is_hardcoded_term(term))
+ return NULL;
+
+ if (term->type_val == PARSE_EVENTS__TERM_TYPE_NUM) {
+ if (term->val.num != 1)
+ return NULL;
+ if (pmu_find_format(&pmu->format, term->config))
+ return NULL;
+ name = term->config;
+ } else if (term->type_val == PARSE_EVENTS__TERM_TYPE_STR) {
+ if (strcasecmp(term->config, "event"))
+ return NULL;
+ name = term->val.str;
+ } else {
+ return NULL;
+ }
+
+ list_for_each_entry(alias, &pmu->aliases, list) {
+ if (!strcasecmp(alias->name, name))
+ return alias;
+ }
+ return NULL;
+}
+
+/*
+ * Find alias in the terms list and replace it with the terms
+ * defined for the alias
+ */
+int perf_pmu__check_alias(struct perf_pmu *pmu, struct list_head *head_terms)
+{
+ struct parse_events__term *term, *h;
+ struct perf_pmu__alias *alias;
+ int ret;
+
+ list_for_each_entry_safe(term, h, head_terms, list) {
+ alias = pmu_find_alias(pmu, term);
+ if (!alias)
+ continue;
+ ret = pmu_alias_terms(alias, &term->list);
+ if (ret)
+ return ret;
+ list_del(&term->list);
+ free(term);
+ }
+ return 0;
+}
+
int perf_pmu__new_format(struct list_head *list, char *name,
int config, unsigned long *bits)
{
diff --git a/tools/perf/util/pmu.h b/tools/perf/util/pmu.h
index 68c0db9..535f2c5 100644
--- a/tools/perf/util/pmu.h
+++ b/tools/perf/util/pmu.h
@@ -19,17 +19,26 @@
struct list_head list;
};
+struct perf_pmu__alias {
+ char *name;
+ struct list_head terms;
+ struct list_head list;
+};
+
struct perf_pmu {
char *name;
__u32 type;
struct list_head format;
+ struct list_head aliases;
struct list_head list;
};
struct perf_pmu *perf_pmu__find(char *name);
int perf_pmu__config(struct perf_pmu *pmu, struct perf_event_attr *attr,
struct list_head *head_terms);
-
+int perf_pmu__check_alias(struct perf_pmu *pmu, struct list_head *head_terms);
+struct list_head *perf_pmu__alias(struct perf_pmu *pmu,
+ struct list_head *head_terms);
int perf_pmu_wrap(void);
void perf_pmu_error(struct list_head *list, char *name, char const *msg);
diff --git a/tools/perf/util/scripting-engines/trace-event-perl.c b/tools/perf/util/scripting-engines/trace-event-perl.c
index 4c1b3d7..02dfa19 100644
--- a/tools/perf/util/scripting-engines/trace-event-perl.c
+++ b/tools/perf/util/scripting-engines/trace-event-perl.c
@@ -209,6 +209,10 @@
define_symbolic_values(args->symbol.symbols, ev_name,
cur_field_name);
break;
+ case PRINT_HEX:
+ define_event_symbols(event, ev_name, args->hex.field);
+ define_event_symbols(event, ev_name, args->hex.size);
+ break;
case PRINT_BSTRING:
case PRINT_DYNAMIC_ARRAY:
case PRINT_STRING:
@@ -233,7 +237,8 @@
define_event_symbols(event, ev_name, args->next);
}
-static inline struct event_format *find_cache_event(int type)
+static inline
+struct event_format *find_cache_event(struct pevent *pevent, int type)
{
static char ev_name[256];
struct event_format *event;
@@ -241,7 +246,7 @@
if (events[type])
return events[type];
- events[type] = event = trace_find_event(type);
+ events[type] = event = pevent_find_event(pevent, type);
if (!event)
return NULL;
@@ -252,7 +257,8 @@
return event;
}
-static void perl_process_tracepoint(union perf_event *pevent __unused,
+static void perl_process_tracepoint(union perf_event *perf_event __unused,
+ struct pevent *pevent,
struct perf_sample *sample,
struct perf_evsel *evsel,
struct machine *machine __unused,
@@ -275,13 +281,13 @@
if (evsel->attr.type != PERF_TYPE_TRACEPOINT)
return;
- type = trace_parse_common_type(data);
+ type = trace_parse_common_type(pevent, data);
- event = find_cache_event(type);
+ event = find_cache_event(pevent, type);
if (!event)
die("ug! no event found for type %d", type);
- pid = trace_parse_common_pid(data);
+ pid = trace_parse_common_pid(pevent, data);
sprintf(handler, "%s::%s", event->system, event->name);
@@ -314,7 +320,8 @@
offset = field->offset;
XPUSHs(sv_2mortal(newSVpv((char *)data + offset, 0)));
} else { /* FIELD_IS_NUMERIC */
- val = read_size(data + field->offset, field->size);
+ val = read_size(pevent, data + field->offset,
+ field->size);
if (field->flags & FIELD_IS_SIGNED) {
XPUSHs(sv_2mortal(newSViv(val)));
} else {
@@ -368,14 +375,15 @@
LEAVE;
}
-static void perl_process_event(union perf_event *pevent,
+static void perl_process_event(union perf_event *event,
+ struct pevent *pevent,
struct perf_sample *sample,
struct perf_evsel *evsel,
struct machine *machine,
struct thread *thread)
{
- perl_process_tracepoint(pevent, sample, evsel, machine, thread);
- perl_process_event_generic(pevent, sample, evsel, machine, thread);
+ perl_process_tracepoint(event, pevent, sample, evsel, machine, thread);
+ perl_process_event_generic(event, sample, evsel, machine, thread);
}
static void run_start_sub(void)
@@ -448,7 +456,7 @@
return 0;
}
-static int perl_generate_script(const char *outfile)
+static int perl_generate_script(struct pevent *pevent, const char *outfile)
{
struct event_format *event = NULL;
struct format_field *f;
@@ -495,7 +503,7 @@
fprintf(ofp, "sub trace_begin\n{\n\t# optional\n}\n\n");
fprintf(ofp, "sub trace_end\n{\n\t# optional\n}\n\n");
- while ((event = trace_find_next_event(event))) {
+ while ((event = trace_find_next_event(pevent, event))) {
fprintf(ofp, "sub %s::%s\n{\n", event->system, event->name);
fprintf(ofp, "\tmy (");
diff --git a/tools/perf/util/scripting-engines/trace-event-python.c b/tools/perf/util/scripting-engines/trace-event-python.c
index acb9795..ce4d1b0 100644
--- a/tools/perf/util/scripting-engines/trace-event-python.c
+++ b/tools/perf/util/scripting-engines/trace-event-python.c
@@ -166,6 +166,10 @@
define_values(PRINT_SYMBOL, args->symbol.symbols, ev_name,
cur_field_name);
break;
+ case PRINT_HEX:
+ define_event_symbols(event, ev_name, args->hex.field);
+ define_event_symbols(event, ev_name, args->hex.size);
+ break;
case PRINT_STRING:
break;
case PRINT_TYPE:
@@ -190,7 +194,8 @@
define_event_symbols(event, ev_name, args->next);
}
-static inline struct event_format *find_cache_event(int type)
+static inline
+struct event_format *find_cache_event(struct pevent *pevent, int type)
{
static char ev_name[256];
struct event_format *event;
@@ -198,7 +203,7 @@
if (events[type])
return events[type];
- events[type] = event = trace_find_event(type);
+ events[type] = event = pevent_find_event(pevent, type);
if (!event)
return NULL;
@@ -209,7 +214,8 @@
return event;
}
-static void python_process_event(union perf_event *pevent __unused,
+static void python_process_event(union perf_event *perf_event __unused,
+ struct pevent *pevent,
struct perf_sample *sample,
struct perf_evsel *evsel __unused,
struct machine *machine __unused,
@@ -233,13 +239,13 @@
if (!t)
Py_FatalError("couldn't create Python tuple");
- type = trace_parse_common_type(data);
+ type = trace_parse_common_type(pevent, data);
- event = find_cache_event(type);
+ event = find_cache_event(pevent, type);
if (!event)
die("ug! no event found for type %d", type);
- pid = trace_parse_common_pid(data);
+ pid = trace_parse_common_pid(pevent, data);
sprintf(handler_name, "%s__%s", event->system, event->name);
@@ -284,7 +290,8 @@
offset = field->offset;
obj = PyString_FromString((char *)data + offset);
} else { /* FIELD_IS_NUMERIC */
- val = read_size(data + field->offset, field->size);
+ val = read_size(pevent, data + field->offset,
+ field->size);
if (field->flags & FIELD_IS_SIGNED) {
if ((long long)val >= LONG_MIN &&
(long long)val <= LONG_MAX)
@@ -438,7 +445,7 @@
return err;
}
-static int python_generate_script(const char *outfile)
+static int python_generate_script(struct pevent *pevent, const char *outfile)
{
struct event_format *event = NULL;
struct format_field *f;
@@ -487,7 +494,7 @@
fprintf(ofp, "def trace_end():\n");
fprintf(ofp, "\tprint \"in trace_end\"\n\n");
- while ((event = trace_find_next_event(event))) {
+ while ((event = trace_find_next_event(pevent, event))) {
fprintf(ofp, "def %s__%s(", event->system, event->name);
fprintf(ofp, "event_name, ");
fprintf(ofp, "context, ");
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 2600916..8e48559 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -14,6 +14,7 @@
#include "sort.h"
#include "util.h"
#include "cpumap.h"
+#include "event-parse.h"
static int perf_session__open(struct perf_session *self, bool force)
{
@@ -289,7 +290,6 @@
}
int machine__resolve_callchain(struct machine *self,
- struct perf_evsel *evsel __used,
struct thread *thread,
struct ip_callchain *chain,
struct symbol **parent)
@@ -442,6 +442,16 @@
tool->finished_round = process_finished_round_stub;
}
}
+
+void mem_bswap_32(void *src, int byte_size)
+{
+ u32 *m = src;
+ while (byte_size > 0) {
+ *m = bswap_32(*m);
+ byte_size -= sizeof(u32);
+ ++m;
+ }
+}
void mem_bswap_64(void *src, int byte_size)
{
@@ -916,7 +926,7 @@
else
pid = event->ip.pid;
- return perf_session__find_machine(session, pid);
+ return perf_session__findnew_machine(session, pid);
}
return perf_session__find_host_machine(session);
@@ -1439,7 +1449,7 @@
ret += hists__fprintf_nr_events(&session->hists, fp);
list_for_each_entry(pos, &session->evlist->entries, node) {
- ret += fprintf(fp, "%s stats:\n", event_name(pos));
+ ret += fprintf(fp, "%s stats:\n", perf_evsel__name(pos));
ret += hists__fprintf_nr_events(&pos->hists, fp);
}
@@ -1480,8 +1490,8 @@
}
void perf_event__print_ip(union perf_event *event, struct perf_sample *sample,
- struct machine *machine, struct perf_evsel *evsel,
- int print_sym, int print_dso, int print_symoffset)
+ struct machine *machine, int print_sym,
+ int print_dso, int print_symoffset)
{
struct addr_location al;
struct callchain_cursor_node *node;
@@ -1495,7 +1505,7 @@
if (symbol_conf.use_callchain && sample->callchain) {
- if (machine__resolve_callchain(machine, evsel, al.thread,
+ if (machine__resolve_callchain(machine, al.thread,
sample->callchain, NULL) != 0) {
if (verbose)
error("Failed to resolve callchain. Skipping\n");
@@ -1601,3 +1611,58 @@
perf_header__fprintf_info(session, fp, full);
fprintf(fp, "# ========\n#\n");
}
+
+
+int __perf_session__set_tracepoints_handlers(struct perf_session *session,
+ const struct perf_evsel_str_handler *assocs,
+ size_t nr_assocs)
+{
+ struct perf_evlist *evlist = session->evlist;
+ struct event_format *format;
+ struct perf_evsel *evsel;
+ char *tracepoint, *name;
+ size_t i;
+ int err;
+
+ for (i = 0; i < nr_assocs; i++) {
+ err = -ENOMEM;
+ tracepoint = strdup(assocs[i].name);
+ if (tracepoint == NULL)
+ goto out;
+
+ err = -ENOENT;
+ name = strchr(tracepoint, ':');
+ if (name == NULL)
+ goto out_free;
+
+ *name++ = '\0';
+ format = pevent_find_event_by_name(session->pevent,
+ tracepoint, name);
+ if (format == NULL) {
+ /*
+ * Adding a handler for an event not in the session,
+ * just ignore it.
+ */
+ goto next;
+ }
+
+ evsel = perf_evlist__find_tracepoint_by_id(evlist, format->id);
+ if (evsel == NULL)
+ goto next;
+
+ err = -EEXIST;
+ if (evsel->handler.func != NULL)
+ goto out_free;
+ evsel->handler.func = assocs[i].handler;
+next:
+ free(tracepoint);
+ }
+
+ err = 0;
+out:
+ return err;
+
+out_free:
+ free(tracepoint);
+ goto out;
+}
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index 7a5434c..7c435bd 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -33,6 +33,7 @@
struct machine host_machine;
struct rb_root machines;
struct perf_evlist *evlist;
+ struct pevent *pevent;
/*
* FIXME: Need to split this up further, we need global
* stats + per event stats. 'perf diff' also needs
@@ -80,6 +81,7 @@
bool perf_session__has_traces(struct perf_session *self, const char *msg);
void mem_bswap_64(void *src, int byte_size);
+void mem_bswap_32(void *src, int byte_size);
void perf_event__attr_swap(struct perf_event_attr *attr);
int perf_session__create_kernel_maps(struct perf_session *self);
@@ -150,11 +152,20 @@
unsigned int type);
void perf_event__print_ip(union perf_event *event, struct perf_sample *sample,
- struct machine *machine, struct perf_evsel *evsel,
- int print_sym, int print_dso, int print_symoffset);
+ struct machine *machine, int print_sym,
+ int print_dso, int print_symoffset);
int perf_session__cpu_bitmap(struct perf_session *session,
const char *cpu_list, unsigned long *cpu_bitmap);
void perf_session__fprintf_info(struct perf_session *s, FILE *fp, bool full);
+
+struct perf_evsel_str_handler;
+
+int __perf_session__set_tracepoints_handlers(struct perf_session *session,
+ const struct perf_evsel_str_handler *assocs,
+ size_t nr_assocs);
+
+#define perf_session__set_tracepoints_handlers(session, array) \
+ __perf_session__set_tracepoints_handlers(session, array, ARRAY_SIZE(array))
#endif /* __PERF_SESSION_H */
diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c
index a272374..0f5a0a4 100644
--- a/tools/perf/util/sort.c
+++ b/tools/perf/util/sort.c
@@ -241,6 +241,54 @@
.se_width_idx = HISTC_SYMBOL,
};
+/* --sort srcline */
+
+static int64_t
+sort__srcline_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+ return (int64_t)(right->ip - left->ip);
+}
+
+static int hist_entry__srcline_snprintf(struct hist_entry *self, char *bf,
+ size_t size, unsigned int width __used)
+{
+ FILE *fp;
+ char cmd[PATH_MAX + 2], *path = self->srcline, *nl;
+ size_t line_len;
+
+ if (path != NULL)
+ goto out_path;
+
+ snprintf(cmd, sizeof(cmd), "addr2line -e %s %016" PRIx64,
+ self->ms.map->dso->long_name, self->ip);
+ fp = popen(cmd, "r");
+ if (!fp)
+ goto out_ip;
+
+ if (getline(&path, &line_len, fp) < 0 || !line_len)
+ goto out_ip;
+ fclose(fp);
+ self->srcline = strdup(path);
+ if (self->srcline == NULL)
+ goto out_ip;
+
+ nl = strchr(self->srcline, '\n');
+ if (nl != NULL)
+ *nl = '\0';
+ path = self->srcline;
+out_path:
+ return repsep_snprintf(bf, size, "%s", path);
+out_ip:
+ return repsep_snprintf(bf, size, "%-#*llx", BITS_PER_LONG / 4, self->ip);
+}
+
+struct sort_entry sort_srcline = {
+ .se_header = "Source:Line",
+ .se_cmp = sort__srcline_cmp,
+ .se_snprintf = hist_entry__srcline_snprintf,
+ .se_width_idx = HISTC_SRCLINE,
+};
+
/* --sort parent */
static int64_t
@@ -439,6 +487,7 @@
DIM(SORT_PARENT, "parent", sort_parent),
DIM(SORT_CPU, "cpu", sort_cpu),
DIM(SORT_MISPREDICT, "mispredict", sort_mispredict),
+ DIM(SORT_SRCLINE, "srcline", sort_srcline),
};
int sort_dimension__add(const char *tok)
diff --git a/tools/perf/util/sort.h b/tools/perf/util/sort.h
index 472aa5a..e724b26 100644
--- a/tools/perf/util/sort.h
+++ b/tools/perf/util/sort.h
@@ -71,6 +71,7 @@
char level;
bool used;
u8 filtered;
+ char *srcline;
struct symbol *parent;
union {
unsigned long position;
@@ -93,6 +94,7 @@
SORT_SYM_FROM,
SORT_SYM_TO,
SORT_MISPREDICT,
+ SORT_SRCLINE,
};
/*
diff --git a/tools/perf/util/string.c b/tools/perf/util/string.c
index d583638..199bc4d 100644
--- a/tools/perf/util/string.c
+++ b/tools/perf/util/string.c
@@ -313,3 +313,25 @@
return 0;
}
+/**
+ * rtrim - Removes trailing whitespace from @s.
+ * @s: The string to be stripped.
+ *
+ * Note that the first trailing whitespace is replaced with a %NUL-terminator
+ * in the given string @s. Returns @s.
+ */
+char *rtrim(char *s)
+{
+ size_t size = strlen(s);
+ char *end;
+
+ if (!size)
+ return s;
+
+ end = s + size - 1;
+ while (end >= s && isspace(*end))
+ end--;
+ *(end + 1) = '\0';
+
+ return s;
+}
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 3e2e5ea..50958bb 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -1478,14 +1478,31 @@
goto out;
}
- sec = elf_section_by_name(elf, &ehdr, &shdr,
- ".note.gnu.build-id", NULL);
- if (sec == NULL) {
+ /*
+ * Check following sections for notes:
+ * '.note.gnu.build-id'
+ * '.notes'
+ * '.note' (VDSO specific)
+ */
+ do {
+ sec = elf_section_by_name(elf, &ehdr, &shdr,
+ ".note.gnu.build-id", NULL);
+ if (sec)
+ break;
+
sec = elf_section_by_name(elf, &ehdr, &shdr,
".notes", NULL);
- if (sec == NULL)
- goto out;
- }
+ if (sec)
+ break;
+
+ sec = elf_section_by_name(elf, &ehdr, &shdr,
+ ".note", NULL);
+ if (sec)
+ break;
+
+ return err;
+
+ } while (0);
data = elf_getdata(sec, NULL);
if (data == NULL)
@@ -1590,11 +1607,62 @@
return err;
}
+static int filename__read_debuglink(const char *filename,
+ char *debuglink, size_t size)
+{
+ int fd, err = -1;
+ Elf *elf;
+ GElf_Ehdr ehdr;
+ GElf_Shdr shdr;
+ Elf_Data *data;
+ Elf_Scn *sec;
+ Elf_Kind ek;
+
+ fd = open(filename, O_RDONLY);
+ if (fd < 0)
+ goto out;
+
+ elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL);
+ if (elf == NULL) {
+ pr_debug2("%s: cannot read %s ELF file.\n", __func__, filename);
+ goto out_close;
+ }
+
+ ek = elf_kind(elf);
+ if (ek != ELF_K_ELF)
+ goto out_close;
+
+ if (gelf_getehdr(elf, &ehdr) == NULL) {
+ pr_err("%s: cannot get elf header.\n", __func__);
+ goto out_close;
+ }
+
+ sec = elf_section_by_name(elf, &ehdr, &shdr,
+ ".gnu_debuglink", NULL);
+ if (sec == NULL)
+ goto out_close;
+
+ data = elf_getdata(sec, NULL);
+ if (data == NULL)
+ goto out_close;
+
+ /* the start of this section is a zero-terminated string */
+ strncpy(debuglink, data->d_buf, size);
+
+ elf_end(elf);
+
+out_close:
+ close(fd);
+out:
+ return err;
+}
+
char dso__symtab_origin(const struct dso *dso)
{
static const char origin[] = {
[SYMTAB__KALLSYMS] = 'k',
[SYMTAB__JAVA_JIT] = 'j',
+ [SYMTAB__DEBUGLINK] = 'l',
[SYMTAB__BUILD_ID_CACHE] = 'B',
[SYMTAB__FEDORA_DEBUGINFO] = 'f',
[SYMTAB__UBUNTU_DEBUGINFO] = 'u',
@@ -1662,10 +1730,22 @@
*/
want_symtab = 1;
restart:
- for (dso->symtab_type = SYMTAB__BUILD_ID_CACHE;
+ for (dso->symtab_type = SYMTAB__DEBUGLINK;
dso->symtab_type != SYMTAB__NOT_FOUND;
dso->symtab_type++) {
switch (dso->symtab_type) {
+ case SYMTAB__DEBUGLINK: {
+ char *debuglink;
+ strncpy(name, dso->long_name, size);
+ debuglink = name + dso->long_name_len;
+ while (debuglink != name && *debuglink != '/')
+ debuglink--;
+ if (*debuglink == '/')
+ debuglink++;
+ filename__read_debuglink(dso->long_name, debuglink,
+ size - (debuglink - name));
+ }
+ break;
case SYMTAB__BUILD_ID_CACHE:
/* skip the locally configured cache if a symfs is given */
if (symbol_conf.symfs[0] ||
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index af0752b..a884b99 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -257,6 +257,7 @@
SYMTAB__KALLSYMS = 0,
SYMTAB__GUEST_KALLSYMS,
SYMTAB__JAVA_JIT,
+ SYMTAB__DEBUGLINK,
SYMTAB__BUILD_ID_CACHE,
SYMTAB__FEDORA_DEBUGINFO,
SYMTAB__UBUNTU_DEBUGINFO,
diff --git a/tools/perf/util/top.c b/tools/perf/util/top.c
index abe0e8e..7eeebce 100644
--- a/tools/perf/util/top.c
+++ b/tools/perf/util/top.c
@@ -65,7 +65,7 @@
top->freq ? "Hz" : "");
}
- ret += SNPRINTF(bf + ret, size - ret, "%s", event_name(top->sym_evsel));
+ ret += SNPRINTF(bf + ret, size - ret, "%s", perf_evsel__name(top->sym_evsel));
ret += SNPRINTF(bf + ret, size - ret, "], ");
diff --git a/tools/perf/util/trace-event-parse.c b/tools/perf/util/trace-event-parse.c
index df2fddb..0715c84 100644
--- a/tools/perf/util/trace-event-parse.c
+++ b/tools/perf/util/trace-event-parse.c
@@ -32,29 +32,25 @@
int header_page_ts_size;
int header_page_data_offset;
-struct pevent *perf_pevent;
-static struct pevent *pevent;
-
bool latency_format;
-int read_trace_init(int file_bigendian, int host_bigendian)
+struct pevent *read_trace_init(int file_bigendian, int host_bigendian)
{
- if (pevent)
- return 0;
+ struct pevent *pevent = pevent_alloc();
- perf_pevent = pevent_alloc();
- pevent = perf_pevent;
+ if (pevent != NULL) {
+ pevent_set_flag(pevent, PEVENT_NSEC_OUTPUT);
+ pevent_set_file_bigendian(pevent, file_bigendian);
+ pevent_set_host_bigendian(pevent, host_bigendian);
+ }
- pevent_set_flag(pevent, PEVENT_NSEC_OUTPUT);
- pevent_set_file_bigendian(pevent, file_bigendian);
- pevent_set_host_bigendian(pevent, host_bigendian);
-
- return 0;
+ return pevent;
}
static int get_common_field(struct scripting_context *context,
int *offset, int *size, const char *type)
{
+ struct pevent *pevent = context->pevent;
struct event_format *event;
struct format_field *field;
@@ -150,7 +146,7 @@
return data + field->offset;
}
-int trace_parse_common_type(void *data)
+int trace_parse_common_type(struct pevent *pevent, void *data)
{
struct pevent_record record;
@@ -158,7 +154,7 @@
return pevent_data_type(pevent, &record);
}
-int trace_parse_common_pid(void *data)
+int trace_parse_common_pid(struct pevent *pevent, void *data)
{
struct pevent_record record;
@@ -166,27 +162,21 @@
return pevent_data_pid(pevent, &record);
}
-unsigned long long read_size(void *ptr, int size)
+unsigned long long read_size(struct pevent *pevent, void *ptr, int size)
{
return pevent_read_number(pevent, ptr, size);
}
-struct event_format *trace_find_event(int type)
-{
- return pevent_find_event(pevent, type);
-}
-
-
-void print_trace_event(int cpu, void *data, int size)
+void print_trace_event(struct pevent *pevent, int cpu, void *data, int size)
{
struct event_format *event;
struct pevent_record record;
struct trace_seq s;
int type;
- type = trace_parse_common_type(data);
+ type = trace_parse_common_type(pevent, data);
- event = trace_find_event(type);
+ event = pevent_find_event(pevent, type);
if (!event) {
warning("ug! no event found for type %d", type);
return;
@@ -198,13 +188,12 @@
record.data = data;
trace_seq_init(&s);
- pevent_print_event(pevent, &s, &record);
+ pevent_event_info(&s, event, &record);
trace_seq_do_printf(&s);
- printf("\n");
}
-void print_event(int cpu, void *data, int size, unsigned long long nsecs,
- char *comm)
+void print_event(struct pevent *pevent, int cpu, void *data, int size,
+ unsigned long long nsecs, char *comm)
{
struct pevent_record record;
struct trace_seq s;
@@ -227,7 +216,8 @@
printf("\n");
}
-void parse_proc_kallsyms(char *file, unsigned int size __unused)
+void parse_proc_kallsyms(struct pevent *pevent,
+ char *file, unsigned int size __unused)
{
unsigned long long addr;
char *func;
@@ -258,7 +248,8 @@
}
}
-void parse_ftrace_printk(char *file, unsigned int size __unused)
+void parse_ftrace_printk(struct pevent *pevent,
+ char *file, unsigned int size __unused)
{
unsigned long long addr;
char *printk;
@@ -282,17 +273,19 @@
}
}
-int parse_ftrace_file(char *buf, unsigned long size)
+int parse_ftrace_file(struct pevent *pevent, char *buf, unsigned long size)
{
return pevent_parse_event(pevent, buf, size, "ftrace");
}
-int parse_event_file(char *buf, unsigned long size, char *sys)
+int parse_event_file(struct pevent *pevent,
+ char *buf, unsigned long size, char *sys)
{
return pevent_parse_event(pevent, buf, size, sys);
}
-struct event_format *trace_find_next_event(struct event_format *event)
+struct event_format *trace_find_next_event(struct pevent *pevent,
+ struct event_format *event)
{
static int idx;
diff --git a/tools/perf/util/trace-event-read.c b/tools/perf/util/trace-event-read.c
index f097e0d..719ed74 100644
--- a/tools/perf/util/trace-event-read.c
+++ b/tools/perf/util/trace-event-read.c
@@ -114,20 +114,20 @@
};
}
-static unsigned int read4(void)
+static unsigned int read4(struct pevent *pevent)
{
unsigned int data;
read_or_die(&data, 4);
- return __data2host4(perf_pevent, data);
+ return __data2host4(pevent, data);
}
-static unsigned long long read8(void)
+static unsigned long long read8(struct pevent *pevent)
{
unsigned long long data;
read_or_die(&data, 8);
- return __data2host8(perf_pevent, data);
+ return __data2host8(pevent, data);
}
static char *read_string(void)
@@ -168,12 +168,12 @@
return str;
}
-static void read_proc_kallsyms(void)
+static void read_proc_kallsyms(struct pevent *pevent)
{
unsigned int size;
char *buf;
- size = read4();
+ size = read4(pevent);
if (!size)
return;
@@ -181,29 +181,29 @@
read_or_die(buf, size);
buf[size] = '\0';
- parse_proc_kallsyms(buf, size);
+ parse_proc_kallsyms(pevent, buf, size);
free(buf);
}
-static void read_ftrace_printk(void)
+static void read_ftrace_printk(struct pevent *pevent)
{
unsigned int size;
char *buf;
- size = read4();
+ size = read4(pevent);
if (!size)
return;
buf = malloc_or_die(size);
read_or_die(buf, size);
- parse_ftrace_printk(buf, size);
+ parse_ftrace_printk(pevent, buf, size);
free(buf);
}
-static void read_header_files(void)
+static void read_header_files(struct pevent *pevent)
{
unsigned long long size;
char *header_event;
@@ -214,7 +214,7 @@
if (memcmp(buf, "header_page", 12) != 0)
die("did not read header page");
- size = read8();
+ size = read8(pevent);
skip(size);
/*
@@ -227,47 +227,48 @@
if (memcmp(buf, "header_event", 13) != 0)
die("did not read header event");
- size = read8();
+ size = read8(pevent);
header_event = malloc_or_die(size);
read_or_die(header_event, size);
free(header_event);
}
-static void read_ftrace_file(unsigned long long size)
+static void read_ftrace_file(struct pevent *pevent, unsigned long long size)
{
char *buf;
buf = malloc_or_die(size);
read_or_die(buf, size);
- parse_ftrace_file(buf, size);
+ parse_ftrace_file(pevent, buf, size);
free(buf);
}
-static void read_event_file(char *sys, unsigned long long size)
+static void read_event_file(struct pevent *pevent, char *sys,
+ unsigned long long size)
{
char *buf;
buf = malloc_or_die(size);
read_or_die(buf, size);
- parse_event_file(buf, size, sys);
+ parse_event_file(pevent, buf, size, sys);
free(buf);
}
-static void read_ftrace_files(void)
+static void read_ftrace_files(struct pevent *pevent)
{
unsigned long long size;
int count;
int i;
- count = read4();
+ count = read4(pevent);
for (i = 0; i < count; i++) {
- size = read8();
- read_ftrace_file(size);
+ size = read8(pevent);
+ read_ftrace_file(pevent, size);
}
}
-static void read_event_files(void)
+static void read_event_files(struct pevent *pevent)
{
unsigned long long size;
char *sys;
@@ -275,15 +276,15 @@
int count;
int i,x;
- systems = read4();
+ systems = read4(pevent);
for (i = 0; i < systems; i++) {
sys = read_string();
- count = read4();
+ count = read4(pevent);
for (x=0; x < count; x++) {
- size = read8();
- read_event_file(sys, size);
+ size = read8(pevent);
+ read_event_file(pevent, sys, size);
}
}
}
@@ -377,7 +378,7 @@
return (unsigned long)ptr - (unsigned long)cpu_data[cpu].page;
}
-struct pevent_record *trace_peek_data(int cpu)
+struct pevent_record *trace_peek_data(struct pevent *pevent, int cpu)
{
struct pevent_record *data;
void *page = cpu_data[cpu].page;
@@ -399,15 +400,15 @@
/* FIXME: handle header page */
if (header_page_ts_size != 8)
die("expected a long long type for timestamp");
- cpu_data[cpu].timestamp = data2host8(perf_pevent, ptr);
+ cpu_data[cpu].timestamp = data2host8(pevent, ptr);
ptr += 8;
switch (header_page_size_size) {
case 4:
- cpu_data[cpu].page_size = data2host4(perf_pevent, ptr);
+ cpu_data[cpu].page_size = data2host4(pevent, ptr);
ptr += 4;
break;
case 8:
- cpu_data[cpu].page_size = data2host8(perf_pevent, ptr);
+ cpu_data[cpu].page_size = data2host8(pevent, ptr);
ptr += 8;
break;
default:
@@ -421,10 +422,10 @@
if (idx >= cpu_data[cpu].page_size) {
get_next_page(cpu);
- return trace_peek_data(cpu);
+ return trace_peek_data(pevent, cpu);
}
- type_len_ts = data2host4(perf_pevent, ptr);
+ type_len_ts = data2host4(pevent, ptr);
ptr += 4;
type_len = type_len4host(type_len_ts);
@@ -434,14 +435,14 @@
case RINGBUF_TYPE_PADDING:
if (!delta)
die("error, hit unexpected end of page");
- length = data2host4(perf_pevent, ptr);
+ length = data2host4(pevent, ptr);
ptr += 4;
length *= 4;
ptr += length;
goto read_again;
case RINGBUF_TYPE_TIME_EXTEND:
- extend = data2host4(perf_pevent, ptr);
+ extend = data2host4(pevent, ptr);
ptr += 4;
extend <<= TS_SHIFT;
extend += delta;
@@ -452,7 +453,7 @@
ptr += 12;
break;
case 0:
- length = data2host4(perf_pevent, ptr);
+ length = data2host4(pevent, ptr);
ptr += 4;
die("here! length=%d", length);
break;
@@ -477,17 +478,17 @@
return data;
}
-struct pevent_record *trace_read_data(int cpu)
+struct pevent_record *trace_read_data(struct pevent *pevent, int cpu)
{
struct pevent_record *data;
- data = trace_peek_data(cpu);
+ data = trace_peek_data(pevent, cpu);
cpu_data[cpu].next = NULL;
return data;
}
-ssize_t trace_report(int fd, bool __repipe)
+ssize_t trace_report(int fd, struct pevent **ppevent, bool __repipe)
{
char buf[BUFSIZ];
char test[] = { 23, 8, 68 };
@@ -519,30 +520,32 @@
file_bigendian = buf[0];
host_bigendian = bigendian();
- read_trace_init(file_bigendian, host_bigendian);
+ *ppevent = read_trace_init(file_bigendian, host_bigendian);
+ if (*ppevent == NULL)
+ die("read_trace_init failed");
read_or_die(buf, 1);
long_size = buf[0];
- page_size = read4();
+ page_size = read4(*ppevent);
- read_header_files();
+ read_header_files(*ppevent);
- read_ftrace_files();
- read_event_files();
- read_proc_kallsyms();
- read_ftrace_printk();
+ read_ftrace_files(*ppevent);
+ read_event_files(*ppevent);
+ read_proc_kallsyms(*ppevent);
+ read_ftrace_printk(*ppevent);
size = calc_data_size - 1;
calc_data_size = 0;
repipe = false;
if (show_funcs) {
- pevent_print_funcs(perf_pevent);
+ pevent_print_funcs(*ppevent);
return size;
}
if (show_printk) {
- pevent_print_printk(perf_pevent);
+ pevent_print_printk(*ppevent);
return size;
}
diff --git a/tools/perf/util/trace-event-scripting.c b/tools/perf/util/trace-event-scripting.c
index 18ae6c1..474aa7a 100644
--- a/tools/perf/util/trace-event-scripting.c
+++ b/tools/perf/util/trace-event-scripting.c
@@ -36,6 +36,7 @@
}
static void process_event_unsupported(union perf_event *event __unused,
+ struct pevent *pevent __unused,
struct perf_sample *sample __unused,
struct perf_evsel *evsel __unused,
struct machine *machine __unused,
@@ -61,7 +62,8 @@
return -1;
}
-static int python_generate_script_unsupported(const char *outfile __unused)
+static int python_generate_script_unsupported(struct pevent *pevent __unused,
+ const char *outfile __unused)
{
print_python_unsupported_msg();
@@ -122,7 +124,8 @@
return -1;
}
-static int perl_generate_script_unsupported(const char *outfile __unused)
+static int perl_generate_script_unsupported(struct pevent *pevent __unused,
+ const char *outfile __unused)
{
print_perl_unsupported_msg();
diff --git a/tools/perf/util/trace-event.h b/tools/perf/util/trace-event.h
index 639852a..8fef1d6 100644
--- a/tools/perf/util/trace-event.h
+++ b/tools/perf/util/trace-event.h
@@ -8,6 +8,7 @@
struct machine;
struct perf_sample;
union perf_event;
+struct perf_tool;
struct thread;
extern int header_page_size_size;
@@ -29,35 +30,36 @@
int bigendian(void);
-int read_trace_init(int file_bigendian, int host_bigendian);
-void print_trace_event(int cpu, void *data, int size);
+struct pevent *read_trace_init(int file_bigendian, int host_bigendian);
+void print_trace_event(struct pevent *pevent, int cpu, void *data, int size);
-void print_event(int cpu, void *data, int size, unsigned long long nsecs,
- char *comm);
+void print_event(struct pevent *pevent, int cpu, void *data, int size,
+ unsigned long long nsecs, char *comm);
-int parse_ftrace_file(char *buf, unsigned long size);
-int parse_event_file(char *buf, unsigned long size, char *sys);
+int parse_ftrace_file(struct pevent *pevent, char *buf, unsigned long size);
+int parse_event_file(struct pevent *pevent,
+ char *buf, unsigned long size, char *sys);
-struct pevent_record *trace_peek_data(int cpu);
-struct event_format *trace_find_event(int type);
+struct pevent_record *trace_peek_data(struct pevent *pevent, int cpu);
unsigned long long
raw_field_value(struct event_format *event, const char *name, void *data);
void *raw_field_ptr(struct event_format *event, const char *name, void *data);
-void parse_proc_kallsyms(char *file, unsigned int size __unused);
-void parse_ftrace_printk(char *file, unsigned int size __unused);
+void parse_proc_kallsyms(struct pevent *pevent, char *file, unsigned int size);
+void parse_ftrace_printk(struct pevent *pevent, char *file, unsigned int size);
-ssize_t trace_report(int fd, bool repipe);
+ssize_t trace_report(int fd, struct pevent **pevent, bool repipe);
-int trace_parse_common_type(void *data);
-int trace_parse_common_pid(void *data);
+int trace_parse_common_type(struct pevent *pevent, void *data);
+int trace_parse_common_pid(struct pevent *pevent, void *data);
-struct event_format *trace_find_next_event(struct event_format *event);
-unsigned long long read_size(void *ptr, int size);
+struct event_format *trace_find_next_event(struct pevent *pevent,
+ struct event_format *event);
+unsigned long long read_size(struct pevent *pevent, void *ptr, int size);
unsigned long long eval_flag(const char *flag);
-struct pevent_record *trace_read_data(int cpu);
+struct pevent_record *trace_read_data(struct pevent *pevent, int cpu);
int read_tracing_data(int fd, struct list_head *pattrs);
struct tracing_data {
@@ -77,11 +79,12 @@
int (*start_script) (const char *script, int argc, const char **argv);
int (*stop_script) (void);
void (*process_event) (union perf_event *event,
+ struct pevent *pevent,
struct perf_sample *sample,
struct perf_evsel *evsel,
struct machine *machine,
struct thread *thread);
- int (*generate_script) (const char *outfile);
+ int (*generate_script) (struct pevent *pevent, const char *outfile);
};
int script_spec_register(const char *spec, struct scripting_ops *ops);
@@ -90,6 +93,7 @@
void setup_python_scripting(void);
struct scripting_context {
+ struct pevent *pevent;
void *event_data;
};
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
index 2daaedb..b13c733 100644
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -264,4 +264,6 @@
size_t hex_width(u64 v);
+char *rtrim(char *s);
+
#endif
diff --git a/virt/kvm/assigned-dev.c b/virt/kvm/assigned-dev.c
index 01f572c..23a41a9 100644
--- a/virt/kvm/assigned-dev.c
+++ b/virt/kvm/assigned-dev.c
@@ -334,6 +334,11 @@
}
#ifdef __KVM_HAVE_MSI
+static irqreturn_t kvm_assigned_dev_msi(int irq, void *dev_id)
+{
+ return IRQ_WAKE_THREAD;
+}
+
static int assigned_device_enable_host_msi(struct kvm *kvm,
struct kvm_assigned_dev_kernel *dev)
{
@@ -346,7 +351,7 @@
}
dev->host_irq = dev->dev->irq;
- if (request_threaded_irq(dev->host_irq, NULL,
+ if (request_threaded_irq(dev->host_irq, kvm_assigned_dev_msi,
kvm_assigned_dev_thread_msi, 0,
dev->irq_name, dev)) {
pci_disable_msi(dev->dev);
@@ -358,6 +363,11 @@
#endif
#ifdef __KVM_HAVE_MSIX
+static irqreturn_t kvm_assigned_dev_msix(int irq, void *dev_id)
+{
+ return IRQ_WAKE_THREAD;
+}
+
static int assigned_device_enable_host_msix(struct kvm *kvm,
struct kvm_assigned_dev_kernel *dev)
{
@@ -374,7 +384,8 @@
for (i = 0; i < dev->entries_nr; i++) {
r = request_threaded_irq(dev->host_msix_entries[i].vector,
- NULL, kvm_assigned_dev_thread_msix,
+ kvm_assigned_dev_msix,
+ kvm_assigned_dev_thread_msix,
0, dev->irq_name, dev);
if (r)
goto err;
@@ -635,7 +646,6 @@
int r = 0, idx;
struct kvm_assigned_dev_kernel *match;
struct pci_dev *dev;
- u8 header_type;
if (!(assigned_dev->flags & KVM_DEV_ASSIGN_ENABLE_IOMMU))
return -EINVAL;
@@ -668,8 +678,7 @@
}
/* Don't allow bridges to be assigned */
- pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
- if ((header_type & PCI_HEADER_TYPE) != PCI_HEADER_TYPE_NORMAL) {
+ if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL) {
r = -EPERM;
goto out_put;
}
diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
index f59c1e8..7d7e2aa 100644
--- a/virt/kvm/eventfd.c
+++ b/virt/kvm/eventfd.c
@@ -198,7 +198,7 @@
}
static int
-kvm_irqfd_assign(struct kvm *kvm, int fd, int gsi)
+kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args)
{
struct kvm_irq_routing_table *irq_rt;
struct _irqfd *irqfd, *tmp;
@@ -212,12 +212,12 @@
return -ENOMEM;
irqfd->kvm = kvm;
- irqfd->gsi = gsi;
+ irqfd->gsi = args->gsi;
INIT_LIST_HEAD(&irqfd->list);
INIT_WORK(&irqfd->inject, irqfd_inject);
INIT_WORK(&irqfd->shutdown, irqfd_shutdown);
- file = eventfd_fget(fd);
+ file = eventfd_fget(args->fd);
if (IS_ERR(file)) {
ret = PTR_ERR(file);
goto fail;
@@ -298,19 +298,19 @@
* shutdown any irqfd's that match fd+gsi
*/
static int
-kvm_irqfd_deassign(struct kvm *kvm, int fd, int gsi)
+kvm_irqfd_deassign(struct kvm *kvm, struct kvm_irqfd *args)
{
struct _irqfd *irqfd, *tmp;
struct eventfd_ctx *eventfd;
- eventfd = eventfd_ctx_fdget(fd);
+ eventfd = eventfd_ctx_fdget(args->fd);
if (IS_ERR(eventfd))
return PTR_ERR(eventfd);
spin_lock_irq(&kvm->irqfds.lock);
list_for_each_entry_safe(irqfd, tmp, &kvm->irqfds.items, list) {
- if (irqfd->eventfd == eventfd && irqfd->gsi == gsi) {
+ if (irqfd->eventfd == eventfd && irqfd->gsi == args->gsi) {
/*
* This rcu_assign_pointer is needed for when
* another thread calls kvm_irq_routing_update before
@@ -338,12 +338,15 @@
}
int
-kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags)
+kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args)
{
- if (flags & KVM_IRQFD_FLAG_DEASSIGN)
- return kvm_irqfd_deassign(kvm, fd, gsi);
+ if (args->flags & ~KVM_IRQFD_FLAG_DEASSIGN)
+ return -EINVAL;
- return kvm_irqfd_assign(kvm, fd, gsi);
+ if (args->flags & KVM_IRQFD_FLAG_DEASSIGN)
+ return kvm_irqfd_deassign(kvm, args);
+
+ return kvm_irqfd_assign(kvm, args);
}
/*
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 7e14068..44ee712 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -2047,7 +2047,7 @@
r = -EFAULT;
if (copy_from_user(&data, argp, sizeof data))
goto out;
- r = kvm_irqfd(kvm, data.fd, data.gsi, data.flags);
+ r = kvm_irqfd(kvm, &data);
break;
}
case KVM_IOEVENTFD: {
@@ -2845,6 +2845,7 @@
kvm_arch_hardware_unsetup();
kvm_arch_exit();
free_cpumask_var(cpus_hardware_enabled);
+ __free_page(fault_page);
__free_page(hwpoison_page);
__free_page(bad_page);
}