isdn: whitespace coding style cleanup
isdn source code uses a not-current coding style.
Update the coding style used on a per-line basis
so that git diff -w shows only elided blank lines
at EOF.
Done with emacs and some scripts and some typing.
Built x86 allyesconfig.
No detected change in objdump -d or size.
Signed-off-by: Joe Perches <joe@perches.com>
diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c
index e775706..c9c98f07 100644
--- a/drivers/isdn/hisax/bkm_a8.c
+++ b/drivers/isdn/hisax/bkm_a8.c
@@ -4,7 +4,7 @@
*
* Author Roland Klabunde
* Copyright by Roland Klabunde <R.Klabunde@Berkom.de>
- *
+ *
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
@@ -34,7 +34,7 @@
};
-#define wordout(addr,val) outw(val,addr)
+#define wordout(addr, val) outw(val, addr)
#define wordin(addr) inw(addr)
static inline u_char
@@ -47,7 +47,7 @@
}
static inline void
-readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
+readfifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
{
int i;
wordout(ale, off);
@@ -64,7 +64,7 @@
}
static inline void
-writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
+writefifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
{
int i;
wordout(ale, off);
@@ -87,13 +87,13 @@
}
static void
-ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
+ReadISACfifo(struct IsdnCardState *cs, u_char *data, int size)
{
readfifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
}
static void
-WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
+WriteISACfifo(struct IsdnCardState *cs, u_char *data, int size)
{
writefifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
}
@@ -117,21 +117,21 @@
{
/* set irq mask */
writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK,
- active ? 0xc0 : 0xff);
+ active ? 0xc0 : 0xff);
}
/*
* fast interrupt HSCX stuff goes here
*/
-#define READHSCX(cs, nr, reg) readreg(cs->hw.ax.base, \
- cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0))
-#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.ax.base, \
- cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0), data)
-#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.base, \
- cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
-#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.ax.base, \
- cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
+#define READHSCX(cs, nr, reg) readreg(cs->hw.ax.base, \
+ cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0))
+#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.ax.base, \
+ cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0), data)
+#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.base, \
+ cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
+#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.ax.base, \
+ cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
#include "hscx_irq.c"
@@ -148,7 +148,7 @@
spin_unlock_irqrestore(&cs->lock, flags);
return IRQ_NONE;
}
- Start_IPAC:
+Start_IPAC:
if (cs->debug & L1_DEB_IPAC)
debugl1(cs, "IPAC ISTA %02X", ista);
if (ista & 0x0f) {
@@ -224,33 +224,33 @@
u_long flags;
switch (mt) {
- case CARD_RESET:
- spin_lock_irqsave(&cs->lock, flags);
- /* Disable ints */
- set_ipac_active(cs, 0);
- enable_bkm_int(cs, 0);
- reset_bkm(cs);
- spin_unlock_irqrestore(&cs->lock, flags);
- return (0);
- case CARD_RELEASE:
- /* Sanity */
- spin_lock_irqsave(&cs->lock, flags);
- set_ipac_active(cs, 0);
- enable_bkm_int(cs, 0);
- spin_unlock_irqrestore(&cs->lock, flags);
- release_io_sct_quadro(cs);
- return (0);
- case CARD_INIT:
- spin_lock_irqsave(&cs->lock, flags);
- cs->debug |= L1_DEB_IPAC;
- set_ipac_active(cs, 1);
- inithscxisac(cs, 3);
- /* Enable ints */
- enable_bkm_int(cs, 1);
- spin_unlock_irqrestore(&cs->lock, flags);
- return (0);
- case CARD_TEST:
- return (0);
+ case CARD_RESET:
+ spin_lock_irqsave(&cs->lock, flags);
+ /* Disable ints */
+ set_ipac_active(cs, 0);
+ enable_bkm_int(cs, 0);
+ reset_bkm(cs);
+ spin_unlock_irqrestore(&cs->lock, flags);
+ return (0);
+ case CARD_RELEASE:
+ /* Sanity */
+ spin_lock_irqsave(&cs->lock, flags);
+ set_ipac_active(cs, 0);
+ enable_bkm_int(cs, 0);
+ spin_unlock_irqrestore(&cs->lock, flags);
+ release_io_sct_quadro(cs);
+ return (0);
+ case CARD_INIT:
+ spin_lock_irqsave(&cs->lock, flags);
+ cs->debug |= L1_DEB_IPAC;
+ set_ipac_active(cs, 1);
+ inithscxisac(cs, 3);
+ /* Enable ints */
+ enable_bkm_int(cs, 1);
+ spin_unlock_irqrestore(&cs->lock, flags);
+ return (0);
+ case CARD_TEST:
+ return (0);
}
return (0);
}
@@ -260,11 +260,11 @@
{
if (!request_region(adr, len, "scitel")) {
printk(KERN_WARNING
- "HiSax: Scitel port %#x-%#x already in use\n",
- adr, adr + len);
+ "HiSax: Scitel port %#x-%#x already in use\n",
+ adr, adr + len);
return (1);
}
- return(0);
+ return (0);
}
static struct pci_dev *dev_a8 __devinitdata = NULL;
@@ -298,18 +298,18 @@
return (0);
}
if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
- (sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
+ (sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
return (0);
if (cs->subtyp == SCT_1) {
while ((dev_a8 = hisax_find_pci_device(PCI_VENDOR_ID_PLX,
- PCI_DEVICE_ID_PLX_9050, dev_a8))) {
-
+ PCI_DEVICE_ID_PLX_9050, dev_a8))) {
+
sub_vendor_id = dev_a8->subsystem_vendor;
sub_sys_id = dev_a8->subsystem_device;
if ((sub_sys_id == PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) &&
- (sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
+ (sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
if (pci_enable_device(dev_a8))
- return(0);
+ return (0);
pci_ioaddr1 = pci_resource_start(dev_a8, 1);
pci_irq = dev_a8->irq;
pci_bus = dev_a8->bus->number;
@@ -320,23 +320,23 @@
}
if (!found) {
printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
- "Card not found\n",
- sct_quadro_subtypes[cs->subtyp]);
+ "Card not found\n",
+ sct_quadro_subtypes[cs->subtyp]);
return (0);
}
#ifdef ATTEMPT_PCI_REMAPPING
/* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
- "PLX rev 1, remapping required!\n",
- sct_quadro_subtypes[cs->subtyp]);
+ "PLX rev 1, remapping required!\n",
+ sct_quadro_subtypes[cs->subtyp]);
/* Restart PCI negotiation */
- pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1);
+ pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int)-1);
/* Move up by 0x80 byte */
pci_ioaddr1 += 0x80;
pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, pci_ioaddr1);
- dev_a8->resource[ 1].start = pci_ioaddr1;
+ dev_a8->resource[1].start = pci_ioaddr1;
}
#endif /* End HACK */
}
@@ -371,39 +371,39 @@
/* pci_ioaddr5 is for the first subdevice only */
cs->hw.ax.plx_adr = pci_ioaddr1;
/* Enter all ipac_base addresses */
- switch(cs->subtyp) {
- case 1:
- cs->hw.ax.base = pci_ioaddr5 + 0x00;
- if (sct_alloc_io(pci_ioaddr1, 128))
- return(0);
- if (sct_alloc_io(pci_ioaddr5, 64))
- return(0);
- /* disable all IPAC */
- writereg(pci_ioaddr5, pci_ioaddr5 + 4,
- IPAC_MASK, 0xFF);
- writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c,
- IPAC_MASK, 0xFF);
- writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14,
- IPAC_MASK, 0xFF);
- writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24,
- IPAC_MASK, 0xFF);
- break;
- case 2:
- cs->hw.ax.base = pci_ioaddr4 + 0x08;
- if (sct_alloc_io(pci_ioaddr4, 64))
- return(0);
- break;
- case 3:
- cs->hw.ax.base = pci_ioaddr3 + 0x10;
- if (sct_alloc_io(pci_ioaddr3, 64))
- return(0);
- break;
- case 4:
- cs->hw.ax.base = pci_ioaddr2 + 0x20;
- if (sct_alloc_io(pci_ioaddr2, 64))
- return(0);
- break;
- }
+ switch (cs->subtyp) {
+ case 1:
+ cs->hw.ax.base = pci_ioaddr5 + 0x00;
+ if (sct_alloc_io(pci_ioaddr1, 128))
+ return (0);
+ if (sct_alloc_io(pci_ioaddr5, 64))
+ return (0);
+ /* disable all IPAC */
+ writereg(pci_ioaddr5, pci_ioaddr5 + 4,
+ IPAC_MASK, 0xFF);
+ writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c,
+ IPAC_MASK, 0xFF);
+ writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14,
+ IPAC_MASK, 0xFF);
+ writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24,
+ IPAC_MASK, 0xFF);
+ break;
+ case 2:
+ cs->hw.ax.base = pci_ioaddr4 + 0x08;
+ if (sct_alloc_io(pci_ioaddr4, 64))
+ return (0);
+ break;
+ case 3:
+ cs->hw.ax.base = pci_ioaddr3 + 0x10;
+ if (sct_alloc_io(pci_ioaddr3, 64))
+ return (0);
+ break;
+ case 4:
+ cs->hw.ax.base = pci_ioaddr2 + 0x20;
+ if (sct_alloc_io(pci_ioaddr2, 64))
+ return (0);
+ break;
+ }
/* For isac and hscx data path */
cs->hw.ax.data_adr = cs->hw.ax.base + 4;
@@ -429,7 +429,7 @@
cs->irq_func = &bkm_interrupt_ipac;
printk(KERN_INFO "HiSax: Scitel Quadro (%s): IPAC Version %d\n",
- sct_quadro_subtypes[cs->subtyp],
- readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
+ sct_quadro_subtypes[cs->subtyp],
+ readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
return (1);
}