isdn: whitespace coding style cleanup
isdn source code uses a not-current coding style.
Update the coding style used on a per-line basis
so that git diff -w shows only elided blank lines
at EOF.
Done with emacs and some scripts and some typing.
Built x86 allyesconfig.
No detected change in objdump -d or size.
Signed-off-by: Joe Perches <joe@perches.com>
diff --git a/drivers/isdn/hysdn/boardergo.h b/drivers/isdn/hysdn/boardergo.h
index c59422aa..e99bd81 100644
--- a/drivers/isdn/hysdn/boardergo.h
+++ b/drivers/isdn/hysdn/boardergo.h
@@ -23,8 +23,8 @@
/* following DPRAM layout copied from OS2-driver boarderg.h */
typedef struct ErgDpram_tag {
-/*0000 */ unsigned char ToHyBuf[ERG_TO_HY_BUF_SIZE];
-/*0E00 */ unsigned char ToPcBuf[ERG_TO_PC_BUF_SIZE];
+ /*0000 */ unsigned char ToHyBuf[ERG_TO_HY_BUF_SIZE];
+ /*0E00 */ unsigned char ToPcBuf[ERG_TO_PC_BUF_SIZE];
/*1C00 */ unsigned char bSoftUart[SIZE_RSV_SOFT_UART];
/* size 0x1B0 */
@@ -37,22 +37,22 @@
/*1DB9 unsigned long ucText[ERRLOG_TEXT_SIZE]; *//* ASCIIZ of len ucTextSize-1 */
/*1DF0 */
-/*1DF0 */ unsigned short volatile ToHyChannel;
-/*1DF2 */ unsigned short volatile ToHySize;
+ /*1DF0 */ unsigned short volatile ToHyChannel;
+ /*1DF2 */ unsigned short volatile ToHySize;
/*1DF4 */ unsigned char volatile ToHyFlag;
/* !=0: msg for Hy waiting */
/*1DF5 */ unsigned char volatile ToPcFlag;
/* !=0: msg for PC waiting */
-/*1DF6 */ unsigned short volatile ToPcChannel;
-/*1DF8 */ unsigned short volatile ToPcSize;
+ /*1DF6 */ unsigned short volatile ToPcChannel;
+ /*1DF8 */ unsigned short volatile ToPcSize;
/*1DFA */ unsigned char bRes1DBA[0x1E00 - 0x1DFA];
/* 6 bytes */
-/*1E00 */ unsigned char bRestOfEntryTbl[0x1F00 - 0x1E00];
-/*1F00 */ unsigned long TrapTable[62];
+ /*1E00 */ unsigned char bRestOfEntryTbl[0x1F00 - 0x1E00];
+ /*1F00 */ unsigned long TrapTable[62];
/*1FF8 */ unsigned char bRes1FF8[0x1FFB - 0x1FF8];
/* low part of reset vetor */
-/*1FFB */ unsigned char ToPcIntMetro;
+ /*1FFB */ unsigned char ToPcIntMetro;
/* notes:
* - metro has 32-bit boot ram - accessing
* ToPcInt and ToHyInt would be the same;
@@ -65,13 +65,13 @@
* so E1 side should NOT change this byte
* when writing!
*/
-/*1FFC */ unsigned char volatile ToHyNoDpramErrLog;
+ /*1FFC */ unsigned char volatile ToHyNoDpramErrLog;
/* note: ToHyNoDpramErrLog is used to inform
* boot loader, not to use DPRAM based
* ErrLog; when DOS driver is rewritten
* this becomes obsolete
*/
-/*1FFD */ unsigned char bRes1FFD;
+ /*1FFD */ unsigned char bRes1FFD;
/*1FFE */ unsigned char ToPcInt;
/* E1_intclear; on CHAMP2: E1_intset */
/*1FFF */ unsigned char ToHyInt;
@@ -85,16 +85,16 @@
#define PCI9050_INTR_REG 0x4C /* Interrupt register */
#define PCI9050_USER_IO 0x51 /* User I/O register */
- /* bitmask for PCI9050_INTR_REG: */
+/* bitmask for PCI9050_INTR_REG: */
#define PCI9050_INTR_REG_EN1 0x01 /* 1= enable (def.), 0= disable */
#define PCI9050_INTR_REG_POL1 0x02 /* 1= active high (def.), 0= active low */
#define PCI9050_INTR_REG_STAT1 0x04 /* 1= intr. active, 0= intr. not active (def.) */
#define PCI9050_INTR_REG_ENPCI 0x40 /* 1= PCI interrupts enable (def.) */
- /* bitmask for PCI9050_USER_IO: */
+/* bitmask for PCI9050_USER_IO: */
#define PCI9050_USER_IO_EN3 0x02 /* 1= disable , 0= enable (def.) */
#define PCI9050_USER_IO_DIR3 0x04 /* 1= output (def.), 0= input */
#define PCI9050_USER_IO_DAT3 0x08 /* 1= high (def.) , 0= low */
-#define PCI9050_E1_RESET ( PCI9050_USER_IO_DIR3) /* 0x04 */
-#define PCI9050_E1_RUN (PCI9050_USER_IO_DAT3|PCI9050_USER_IO_DIR3) /* 0x0C */
+#define PCI9050_E1_RESET (PCI9050_USER_IO_DIR3) /* 0x04 */
+#define PCI9050_E1_RUN (PCI9050_USER_IO_DAT3 | PCI9050_USER_IO_DIR3) /* 0x0C */